From 4a428cb2d7fb3dfac36fd10f5b51f0d6598e512d Mon Sep 17 00:00:00 2001 From: Tomasz Duszynski Date: Sat, 9 Feb 2019 18:36:09 +0100 Subject: [PATCH] dt-bindings: iio: chemical: pms7003: add device tree support Add device tree support for Plantower PMS7003 particulate matter sensor. Signed-off-by: Tomasz Duszynski Signed-off-by: Jonathan Cameron --- .../iio/chemical/plantower,pms7003.txt | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt new file mode 100644 index 000000000000..7b5f06f324c8 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.txt @@ -0,0 +1,20 @@ +* Plantower PMS7003 particulate matter sensor + +Required properties: +- compatible: must be "plantower,pms7003" +- vcc-supply: phandle to the regulator that provides power to the sensor + +Optional properties: +- plantower,set-gpios: phandle to the GPIO connected to the SET line +- reset-gpios: phandle to the GPIO connected to the RESET line + +Refer to serial/slave-device.txt for generic serial attached device bindings. + +Example: + +&uart0 { + air-pollution-sensor { + compatible = "plantower,pms7003"; + vcc-supply = <®_vcc5v0>; + }; +}; -- 2.30.2