From 4a3073e2722dbce5004e2bf1eb2a085d5ab31a85 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 11 Sep 2010 09:18:30 -0700 Subject: [PATCH] compat-wireless: add conditions form config into compat_autoconf.h We do not have to use "ifneq ($(CONFIG_...),)", "ifdef CONFIG_..." will also work. It does not matter if it was set to m or y. Now this can be added into compat_autoconf.h without changing the script. Signed-off-by: Hauke Mehrtens --- config.mk | 86 +++++++++++++++++++++++++++---------------------------- 1 file changed, 43 insertions(+), 43 deletions(-) diff --git a/config.mk b/config.mk index 8b0038c5a4b2..b7ef1cecf310 100644 --- a/config.mk +++ b/config.mk @@ -102,9 +102,9 @@ endif endif #CONFIG_COMPAT_KERNEL_27 ifdef CONFIG_COMPAT_KERNEL_33 -ifneq ($(CONFIG_FW_LOADER),) +ifdef CONFIG_FW_LOADER CONFIG_COMPAT_FIRMWARE_CLASS=m -endif +endif #CONFIG_FW_LOADER endif #CONFIG_COMPAT_KERNEL_33 @@ -161,9 +161,9 @@ CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y # CONFIG_BT_CMTP depends on ISDN_CAPI -ifneq ($(CONFIG_ISDN_CAPI),) +ifdef CONFIG_ISDN_CAPI CONFIG_BT_CMTP=m -endif +endif #CONFIG_ISDN_CAPI CONFIG_BT_HIDP=m CONFIG_BT_HCIUART=M @@ -175,12 +175,12 @@ CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIVHCI=m CONFIG_BT_MRVL=m -ifneq ($(CONFIG_PCMCIA),) +ifdef CONFIG_PCMCIA CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m -endif +endif #CONFIG_PCMCIA # CONFIG_CFG80211_WEXT will be resepected for @@ -194,19 +194,19 @@ endif # # For newer kernels we'll just respect your own kernel's # autoconf.h -ifneq ($(CONFIG_WIRELESS_EXT),) +ifdef CONFIG_WIRELESS_EXT CONFIG_CFG80211_WEXT=y -endif +endif #CONFIG_WIRELESS_EXT ifneq ($(CONFIG_STAGING),) -CONFIG_COMPAT_STAGING=m + CONFIG_COMPAT_STAGING=m endif # mac80211 test driver CONFIG_MAC80211_HWSIM=m # PCI Drivers -ifneq ($(CONFIG_PCI),) +ifdef CONFIG_PCI CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG=y @@ -233,9 +233,9 @@ CONFIG_IWL3945=m CONFIG_B43=m CONFIG_B43_HWRNG=y CONFIG_B43_PCI_AUTOSELECT=y -ifneq ($(CONFIG_PCMCIA),) +ifdef CONFIG_PCMCIA CONFIG_B43_PCMCIA=y -endif +endif #CONFIG_PCMCIA CONFIG_B43_LEDS=y CONFIG_B43_PHY_LP=y CONFIG_B43_NPHY=y @@ -282,7 +282,7 @@ endif #CONFIG_WEXT_PRIV endif #CONFIG_WEXT_SPY endif #CONFIG_WIRELESS_EXT -ifneq ($(CONFIG_SSB),) +ifdef CONFIG_SSB # Sonics Silicon Backplane CONFIG_SSB_SPROM=y # CONFIG_SSB_DEBUG=y @@ -290,12 +290,12 @@ CONFIG_SSB_SPROM=y CONFIG_SSB_BLOCKIO=y CONFIG_SSB_PCIHOST=y CONFIG_SSB_B43_PCI_BRIDGE=y -ifneq ($(CONFIG_PCMCIA),) +ifdef CONFIG_PCMCIA CONFIG_SSB_PCMCIAHOST=y -endif +endif #CONFIG_PCMCIA # CONFIG_SSB_DEBUG=y CONFIG_SSB_DRIVER_PCICORE=y -endif +endif #CONFIG_SSB CONFIG_P54_PCI=m @@ -309,22 +309,22 @@ CONFIG_ADM8211=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m -ifneq ($(CONFIG_CRC_CCITT),) +ifdef CONFIG_CRC_CCITT CONFIG_RT2800PCI=m CONFIG_RT2800PCI_PCI=y # CONFIG_RT2800PCI_RT30XX=y # CONFIG_RT2800PCI_RT35XX=y # CONFIG_RT2800PCI_SOC=y -endif +endif #CONFIG_CRC_CCITT NEED_RT2X00=y # Two rt2x00 drivers require firmware: rt61pci and rt73usb. They depend on # CRC to check the firmware. We check here first for the PCI # driver as we're in the PCI section. -ifneq ($(CONFIG_CRC_ITU_T),) +ifdef CONFIG_CRC_ITU_T CONFIG_RT61PCI=m NEED_RT2X00_FIRMWARE=y -endif +endif #CONFIG_CRC_ITU_T CONFIG_MWL8K=m @@ -343,25 +343,25 @@ ifdef CONFIG_WEXT_SPY ifdef CONFIG_WEXT_PRIV CONFIG_HERMES=m CONFIG_HERMES_CACHE_FW_ON_INIT=y -ifneq ($(CONFIG_PPC_PMAC),) +ifdef CONFIG_PPC_PMAC CONFIG_APPLE_AIRPORT=m -endif +endif #CONFIG_PPC_PMAC CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m CONFIG_PCI_HERMES=m -ifneq ($(CONFIG_PCMCIA),) +ifdef CONFIG_PCMCIA CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m -endif +endif #CONFIG_PCMCIA endif #CONFIG_WEXT_PRIV endif #CONFIG_WEXT_SPY endif #CONFIG_WIRELESS_EXT -endif +endif #CONFIG_PCI ## end of PCI -ifneq ($(CONFIG_PCMCIA),) +ifdef CONFIG_PCMCIA ifdef CONFIG_COMPAT_KERNEL_27 CONFIG_LIBERTAS=n @@ -371,14 +371,14 @@ CONFIG_LIBERTAS_CS=m NEED_LIBERTAS=y endif #CONFIG_COMPAT_KERNEL_27 -endif +endif #CONFIG_PCMCIA ## end of PCMCIA # This is required for some cards CONFIG_EEPROM_93CX6=m # USB Drivers -ifneq ($(CONFIG_USB),) +ifdef CONFIG_USB CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG=y @@ -420,19 +420,19 @@ CONFIG_ATH9K_HTC=m # RT2500USB does not require firmware CONFIG_RT2500USB=m -ifneq ($(CONFIG_CRC_CCITT),) +ifdef CONFIG_CRC_CCITT CONFIG_RT2800USB=m CONFIG_RT2800USB_RT30XX=y CONFIG_RT2800USB_RT35XX=y CONFIG_RT2800USB_UNKNOWN=y -endif +endif #CONFIG_CRC_CCITT CONFIG_RT2X00_LIB_USB=m NEED_RT2X00=y # RT73USB requires firmware -ifneq ($(CONFIG_CRC_ITU_T),) +ifdef CONFIG_CRC_ITU_T CONFIG_RT73USB=m NEED_RT2X00_FIRMWARE=y -endif +endif #CONFIG_CRC_ITU_T ifdef CONFIG_COMPAT_KERNEL_27 CONFIG_LIBERTAS_THINFIRM_USB=n @@ -452,15 +452,15 @@ CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_ATH3K=m -endif # end of USB driver list +endif #CONFIG_USB end of USB driver list -ifneq ($(CONFIG_SPI_MASTER),) +ifdef CONFIG_SPI_MASTER ifndef CONFIG_COMPAT_KERNEL_25 -ifneq ($(CONFIG_CRC7),) +ifdef CONFIG_CRC7 CONFIG_WL1251_SPI=m CONFIG_WL1271_SPI=m -endif +endif #CONFIG_CRC7 CONFIG_P54_SPI=m ifdef CONFIG_COMPAT_KERNEL_27 @@ -472,21 +472,21 @@ NEED_LIBERTAS=y endif #CONFIG_COMPAT_KERNEL_27 endif #CONFIG_COMPAT_KERNEL_25 -endif # end of SPI driver list +endif #CONFIG_SPI_MASTER end of SPI driver list -ifneq ($(CONFIG_MMC),) +ifdef CONFIG_MMC CONFIG_SSB_SDIOHOST=y CONFIG_B43_SDIO=y -ifneq ($(CONFIG_CRC7),) +ifdef CONFIG_CRC7 CONFIG_WL1251_SDIO=m ifndef CONFIG_COMPAT_KERNEL_32 CONFIG_WL1271_SDIO=m endif #CONFIG_COMPAT_KERNEL_32 -endif +endif #CONFIG_CRC7 ifdef CONFIG_COMPAT_KERNEL_27 CONFIG_LIBERTAS_SDIO=n @@ -516,7 +516,7 @@ CONFIG_ATH6KL_ENABLE_TARGET_DEBUG_PRINTS=y CONFIG_ATH6KL_VIRTUAL_SCATTER_GATHER=y CONFIG_ATH6K_LEGACY=m endif #CONFIG_WIRELESS_EXT -endif +endif #CONFIG_MMC endif # end of SDIO driver list @@ -551,10 +551,10 @@ CONFIG_ATH_COMMON=m # CONFIG_ATH_DEBUG=y CONFIG_WL12XX=y -ifneq ($(CONFIG_CRC7),) +ifdef CONFIG_CRC7 CONFIG_WL1251=m CONFIG_WL1271=m -endif +endif #CONFIG_CRC7 ifdef CONFIG_COMPAT_KERNEL_27 CONFIG_LIBERTAS=n -- 2.30.2