From 493080815d2ba6e3b7740dbd45c44310935aeebc Mon Sep 17 00:00:00 2001 From: Ptilopsis Leucotis Date: Sun, 15 May 2022 19:15:03 +0300 Subject: [PATCH] ath79: allow use GPIO17 as regular gpio on GL-AR300M devices Small update to my previous path 'fix I2C on GL-AR300M devices'. This update allow using GPIO17 as regular GPIO in case it not used as I2C SDA line. Signed-off-by: Ptilopsis Leucotis --- target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi index 47fda91a0c..d64ffa7115 100644 --- a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi +++ b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi @@ -72,9 +72,6 @@ i2c: i2c { compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&enable_gpio17>; - sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; }; @@ -186,6 +183,9 @@ }; &pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&enable_gpio17>; + enable_gpio17: pinmux_enable_gpio17 { pinctrl-single,bits = <0x10 0x0000 0xff00>; }; -- 2.30.2