From 49109cedab88d95596e3a3c04ef9e6d30fb4bcb3 Mon Sep 17 00:00:00 2001 From: =?utf8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Tue, 31 Mar 2020 09:26:30 +0200 Subject: [PATCH] bcm27xx: update 5.4 patches from RPi foundation MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: Álvaro Fernández Rojas --- target/linux/bcm27xx/bcm2708/config-5.4 | 2 + target/linux/bcm27xx/bcm2709/config-5.4 | 2 + target/linux/bcm27xx/bcm2710/config-5.4 | 2 + target/linux/bcm27xx/bcm2711/config-5.4 | 2 + ...ts-overlays-Create-custom-clocks-in.patch} | 0 ...ices-Fix-vcsm-overflow-bug-when-cou.patch} | 0 ...meout_ms-parameter-to-gpio-poweroff.patch} | 0 ...-overlay-Correct-symbol-path-fixups.patch} | 0 ...ys-sc16ic750-i2c-Fix-xtal-parameter.patch} | 0 ...oduce-of_get_next_dma_parent-helper.patch} | 0 ...-Follow-DMA-parent-for-dma-coherent.patch} | 0 ...-Factor-out-addr-size-cells-parsing.patch} | 0 ...ate-dma-ranges-for-parent-nodes-mis.patch} | 0 ...-of_dma_get_range-work-on-bus-nodes.patch} | 0 ...4_dma_phys_limit-instead-of-calling.patch} | 0 ...ables-used-to-calculate-ZONE_DMA32-.patch} | 0 ...64-use-both-ZONE_DMA-and-ZONE_DMA32.patch} | 0 ...MA-and-ZONE_DMA32-comments-in-enum-.patch} | 0 ...d-a-resource_list_first_type-helper.patch} | 0 ...-ARCH_ZONE_DMA_BITS-into-a-variable.patch} | 0 ...use-default-DMA-address-translation.patch} | 0 ...inbound-resource-parsing-to-helpers.patch} | 0 ...t-unify-the-dma_capable-definitions.patch} | 0 ...a-forward-declaration-for-phys_to_d.patch} | 0 ...e-dma_direct_map_resource-from-the-.patch} | 0 ...eat-dev-bus_dma_mask-as-a-DMA-limit.patch} | 0 ...-dts-bcm2711-Enable-PCIe-controller.patch} | 0 ...roadcom-STB-PCIe-host-controller-dr.patch} | 0 ...50-0459-PCI-brcmstb-Add-MSI-support.patch} | 0 ...uild-on-32bit-ARM-platforms-with-ol.patch} | 0 ...711-rpi.dtsi-Use-upstream-pcie-node.patch} | 0 ...-media-i2c-Add-IMX219-CMOS-sensor-b.patch} | 0 ...c-Add-driver-for-Sony-IMX219-sensor.patch} | 0 ...orrect-link-frequency-to-match-the-.patch} | 0 ...w-.dtbo-overlays-to-be-built-adjust.patch} | 0 ...return-codes-from-ov5647_write-ov56.patch} | 0 ...basic-support-for-multiple-sensor-m.patch} | 0 ...V4L2-controls-for-analogue-gain-exp.patch} | 0 ...v5647-Add-extra-10-bit-sensor-modes.patch} | 0 ...ge-defaults-to-better-match-raw-cam.patch} | 0 ...ge-crtc_state-structure-name-to-avo.patch} | 0 ...c-Add-packed-10bit-YUV-4-2-0-format.patch} | 0 ...FORMAT_P030-support-to-firmware-kms.patch} | 0 ...dd-parameter-to-configure-signal-po.patch} | 0 ...erus-amp-soundcard-and-ma120x0p-cod.patch} | 0 ...cm2711-Add-32-bit-PMU-compatibility.patch} | 0 ...dts-bcm271x-Use-a53-pmu-drop-RPI364.patch} | 0 ...r-ID_MODE_DIS-in-EXT_RGMII_OOB_CTRL.patch} | 0 ...mdline-Fix-possible-reference-past-.patch} | 0 ...mdline-Make-various-char-pointers-c.patch} | 0 ...mdline-Stop-parsing-extras-after-bp.patch} | 0 ...mdline-Accept-extras-directly-after.patch} | 0 ...mdline-Rework-drm_mode_parse_cmdlin.patch} | 0 ...mdline-Add-freestanding-argument-to.patch} | 0 ...mdline-Set-bpp-refresh_specified-af.patch} | 0 ...mdline-Allow-specifying-stand-alone.patch} | 0 ...mdline-Add-support-for-specifying-p.patch} | 0 ...mdline-Remove-some-unnecessary-code.patch} | 0 ...mdline-Explicitly-memset-the-passed.patch} | 0 ...wait_for-macros-to-remove-use-of-msl.patch | 89 + ...91-Reduce-noise-from-rpi-poe-hat-fan.patch | 96 + ...nsirion-SPS30-to-i2c-sensor-overlay.patch} | 12 +- ...add-V4L2_CTRL_TYPE_AREA-control-type.patch | 157 + ...-add-V4L2_CID_UNIT_CELL_SIZE-control.patch | 52 + ...l2-common-add-pixel-encoding-support.patch | 228 + ...n-add-RGB565-and-RGB55-to-v4l2_forma.patch | 28 + ...d-V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF.patch | 184 + ...mem2mem-support-held-capture-buffers.patch | 260 + ...a-videodev2.h-add-V4L2_DEC_CMD_FLUSH.patch | 57 + ...em-add-stateless_-try_-decoder_cmd-i.patch | 96 + ...v4l2-mem2mem-add-new_frame-detection.patch | 69 + ...ion-media-Document-V4L2_CTRL_TYPE_AR.patch | 46 + ...finitions-for-HEVC-stateless-decodin.patch | 1093 +++++ ...4l2-mem2mem-Fix-hold-buf-flag-checks.patch | 37 + ...Document-the-HEVC-slice-pixel-format.patch | 50 + ...uapi-hevc-Add-scaling-matrix-control.patch | 150 + ...-uapi-hevc-Add-segment-address-field.patch | 61 + ...-Add-slice-param-dependent-slice-seg.patch | 23 + ...uapi-Add-hevc-ctrls-for-WPP-decoding.patch | 40 + ...h-Add-a-format-for-column-YUV4-2-0-m.patch | 302 ++ ...em-allow-request-job-buffer-processi.patch | 274 ++ ...s-media-Add-binding-for-the-Raspberr.patch | 106 + ...a-Add-Raspberry-Pi-V4L2-H265-decoder.patch | 4341 +++++++++++++++++ ...verlay-to-enable-the-HEVC-V4L2-drive.patch | 102 + 84 files changed, 7955 insertions(+), 6 deletions(-) rename target/linux/bcm27xx/patches-5.4/{950-0436-ARM-dts-overlays-Create-custom-clocks-in.patch => 950-0435-ARM-dts-overlays-Create-custom-clocks-in.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0437-staging-vc04_services-Fix-vcsm-overflow-bug-when-cou.patch => 950-0436-staging-vc04_services-Fix-vcsm-overflow-bug-when-cou.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0438-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch => 950-0437-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0439-of-overlay-Correct-symbol-path-fixups.patch => 950-0438-of-overlay-Correct-symbol-path-fixups.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0440-overlays-sc16ic750-i2c-Fix-xtal-parameter.patch => 950-0439-overlays-sc16ic750-i2c-Fix-xtal-parameter.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0441-of-address-Introduce-of_get_next_dma_parent-helper.patch => 950-0440-of-address-Introduce-of_get_next_dma_parent-helper.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0442-of-address-Follow-DMA-parent-for-dma-coherent.patch => 950-0441-of-address-Follow-DMA-parent-for-dma-coherent.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0443-of-Factor-out-addr-size-cells-parsing.patch => 950-0442-of-Factor-out-addr-size-cells-parsing.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0444-of-address-Translate-dma-ranges-for-parent-nodes-mis.patch => 950-0443-of-address-Translate-dma-ranges-for-parent-nodes-mis.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0445-of-Make-of_dma_get_range-work-on-bus-nodes.patch => 950-0444-of-Make-of_dma_get_range-work-on-bus-nodes.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0446-arm64-mm-use-arm64_dma_phys_limit-instead-of-calling.patch => 950-0445-arm64-mm-use-arm64_dma_phys_limit-instead-of-calling.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0447-arm64-rename-variables-used-to-calculate-ZONE_DMA32-.patch => 950-0446-arm64-rename-variables-used-to-calculate-ZONE_DMA32-.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0448-arm64-use-both-ZONE_DMA-and-ZONE_DMA32.patch => 950-0447-arm64-use-both-ZONE_DMA-and-ZONE_DMA32.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0449-mm-refresh-ZONE_DMA-and-ZONE_DMA32-comments-in-enum-.patch => 950-0448-mm-refresh-ZONE_DMA-and-ZONE_DMA32-comments-in-enum-.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0450-resource-Add-a-resource_list_first_type-helper.patch => 950-0449-resource-Add-a-resource_list_first_type-helper.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0451-dma-direct-turn-ARCH_ZONE_DMA_BITS-into-a-variable.patch => 950-0450-dma-direct-turn-ARCH_ZONE_DMA_BITS-into-a-variable.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0452-x86-PCI-sta2x11-use-default-DMA-address-translation.patch => 950-0451-x86-PCI-sta2x11-use-default-DMA-address-translation.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0453-PCI-of-Add-inbound-resource-parsing-to-helpers.patch => 950-0452-PCI-of-Add-inbound-resource-parsing-to-helpers.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0454-dma-direct-unify-the-dma_capable-definitions.patch => 950-0453-dma-direct-unify-the-dma_capable-definitions.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0455-dma-direct-avoid-a-forward-declaration-for-phys_to_d.patch => 950-0454-dma-direct-avoid-a-forward-declaration-for-phys_to_d.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0456-dma-direct-exclude-dma_direct_map_resource-from-the-.patch => 950-0455-dma-direct-exclude-dma_direct_map_resource-from-the-.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0457-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch => 950-0456-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0458-ARM-dts-bcm2711-Enable-PCIe-controller.patch => 950-0457-ARM-dts-bcm2711-Enable-PCIe-controller.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0459-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch => 950-0458-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0460-PCI-brcmstb-Add-MSI-support.patch => 950-0459-PCI-brcmstb-Add-MSI-support.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0461-PCI-brcmstb-Fix-build-on-32bit-ARM-platforms-with-ol.patch => 950-0460-PCI-brcmstb-Fix-build-on-32bit-ARM-platforms-with-ol.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0462-bcm2711-rpi.dtsi-Use-upstream-pcie-node.patch => 950-0461-bcm2711-rpi.dtsi-Use-upstream-pcie-node.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0463-media-dt-bindings-media-i2c-Add-IMX219-CMOS-sensor-b.patch => 950-0462-media-dt-bindings-media-i2c-Add-IMX219-CMOS-sensor-b.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0464-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch => 950-0463-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0465-overlays-imx219-Correct-link-frequency-to-match-the-.patch => 950-0464-overlays-imx219-Correct-link-frequency-to-match-the-.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0466-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch => 950-0465-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0467-media-ov5647-Fix-return-codes-from-ov5647_write-ov56.patch => 950-0466-media-ov5647-Fix-return-codes-from-ov5647_write-ov56.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0468-media-ov5647-Add-basic-support-for-multiple-sensor-m.patch => 950-0467-media-ov5647-Add-basic-support-for-multiple-sensor-m.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0469-media-ov5647-Add-V4L2-controls-for-analogue-gain-exp.patch => 950-0468-media-ov5647-Add-V4L2-controls-for-analogue-gain-exp.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0470-media-ov5647-Add-extra-10-bit-sensor-modes.patch => 950-0469-media-ov5647-Add-extra-10-bit-sensor-modes.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0471-media-ov5647-change-defaults-to-better-match-raw-cam.patch => 950-0470-media-ov5647-change-defaults-to-better-match-raw-cam.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0472-drm-vc4-fkms-Change-crtc_state-structure-name-to-avo.patch => 950-0471-drm-vc4-fkms-Change-crtc_state-structure-name-to-avo.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0473-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch => 950-0472-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0474-drm-vc4-Add-DRM_FORMAT_P030-support-to-firmware-kms.patch => 950-0473-drm-vc4-Add-DRM_FORMAT_P030-support-to-firmware-kms.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0475-gpio-ir-overlay-add-parameter-to-configure-signal-po.patch => 950-0474-gpio-ir-overlay-add-parameter-to-configure-signal-po.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0476-Add-support-for-merus-amp-soundcard-and-ma120x0p-cod.patch => 950-0475-Add-support-for-merus-amp-soundcard-and-ma120x0p-cod.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0477-ARM-dts-bcm2711-Add-32-bit-PMU-compatibility.patch => 950-0476-ARM-dts-bcm2711-Add-32-bit-PMU-compatibility.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0478-ARM-dts-bcm271x-Use-a53-pmu-drop-RPI364.patch => 950-0477-ARM-dts-bcm271x-Use-a53-pmu-drop-RPI364.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0479-net-bcmgenet-Clear-ID_MODE_DIS-in-EXT_RGMII_OOB_CTRL.patch => 950-0478-net-bcmgenet-Clear-ID_MODE_DIS-in-EXT_RGMII_OOB_CTRL.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0480-drm-modes-parse_cmdline-Fix-possible-reference-past-.patch => 950-0479-drm-modes-parse_cmdline-Fix-possible-reference-past-.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0481-drm-modes-parse_cmdline-Make-various-char-pointers-c.patch => 950-0480-drm-modes-parse_cmdline-Make-various-char-pointers-c.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0482-drm-modes-parse_cmdline-Stop-parsing-extras-after-bp.patch => 950-0481-drm-modes-parse_cmdline-Stop-parsing-extras-after-bp.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0483-drm-modes-parse_cmdline-Accept-extras-directly-after.patch => 950-0482-drm-modes-parse_cmdline-Accept-extras-directly-after.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0484-drm-modes-parse_cmdline-Rework-drm_mode_parse_cmdlin.patch => 950-0483-drm-modes-parse_cmdline-Rework-drm_mode_parse_cmdlin.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0485-drm-modes-parse_cmdline-Add-freestanding-argument-to.patch => 950-0484-drm-modes-parse_cmdline-Add-freestanding-argument-to.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0486-drm-modes-parse_cmdline-Set-bpp-refresh_specified-af.patch => 950-0485-drm-modes-parse_cmdline-Set-bpp-refresh_specified-af.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0487-drm-modes-parse_cmdline-Allow-specifying-stand-alone.patch => 950-0486-drm-modes-parse_cmdline-Allow-specifying-stand-alone.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0488-drm-modes-parse_cmdline-Add-support-for-specifying-p.patch => 950-0487-drm-modes-parse_cmdline-Add-support-for-specifying-p.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0489-drm-modes-parse_cmdline-Remove-some-unnecessary-code.patch => 950-0488-drm-modes-parse_cmdline-Remove-some-unnecessary-code.patch} (100%) rename target/linux/bcm27xx/patches-5.4/{950-0490-drm-modes-parse_cmdline-Explicitly-memset-the-passed.patch => 950-0489-drm-modes-parse_cmdline-Explicitly-memset-the-passed.patch} (100%) create mode 100644 target/linux/bcm27xx/patches-5.4/950-0490-drm-v3d-Replace-wait_for-macros-to-remove-use-of-msl.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0491-Reduce-noise-from-rpi-poe-hat-fan.patch rename target/linux/bcm27xx/patches-5.4/{950-0491-add-Sensirion-SPS30-to-i2c-sensor-overlay.patch => 950-0492-add-Sensirion-SPS30-to-i2c-sensor-overlay.patch} (77%) create mode 100644 target/linux/bcm27xx/patches-5.4/950-0493-media-add-V4L2_CTRL_TYPE_AREA-control-type.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0494-media-add-V4L2_CID_UNIT_CELL_SIZE-control.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0495-media-v4l2-common-add-pixel-encoding-support.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0496-media-v4l2-common-add-RGB565-and-RGB55-to-v4l2_forma.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0497-media-vb2-add-V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0498-media-v4l2-mem2mem-support-held-capture-buffers.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0499-media-videodev2.h-add-V4L2_DEC_CMD_FLUSH.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0500-media-v4l2-mem2mem-add-stateless_-try_-decoder_cmd-i.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0501-media-v4l2-mem2mem-add-new_frame-detection.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0502-media-Documentation-media-Document-V4L2_CTRL_TYPE_AR.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0503-media-v4l-Add-definitions-for-HEVC-stateless-decodin.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0504-media-v4l2-mem2mem-Fix-hold-buf-flag-checks.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0505-media-pixfmt-Document-the-HEVC-slice-pixel-format.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0506-media-uapi-hevc-Add-scaling-matrix-control.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0507-media-uapi-hevc-Add-segment-address-field.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0508-media-hevc_ctrls-Add-slice-param-dependent-slice-seg.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0509-media-uapi-Add-hevc-ctrls-for-WPP-decoding.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0510-media-videodev2.h-Add-a-format-for-column-YUV4-2-0-m.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0511-media-v4l2-mem2mem-allow-request-job-buffer-processi.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0512-media-dt-bindings-media-Add-binding-for-the-Raspberr.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0513-staging-media-Add-Raspberry-Pi-V4L2-H265-decoder.patch create mode 100644 target/linux/bcm27xx/patches-5.4/950-0514-dtoverlays-Add-overlay-to-enable-the-HEVC-V4L2-drive.patch diff --git a/target/linux/bcm27xx/bcm2708/config-5.4 b/target/linux/bcm27xx/bcm2708/config-5.4 index 6e7d91e3f4..1f12a36ee7 100644 --- a/target/linux/bcm27xx/bcm2708/config-5.4 +++ b/target/linux/bcm27xx/bcm2708/config-5.4 @@ -243,6 +243,8 @@ CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_UID16=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HW_CONSOLE=y +CONFIG_HZ=100 +CONFIG_HZ_100=y CONFIG_HZ_FIXED=0 CONFIG_I2C=y # CONFIG_I2C_BCM2708 is not set diff --git a/target/linux/bcm27xx/bcm2709/config-5.4 b/target/linux/bcm27xx/bcm2709/config-5.4 index e6ce625d1b..c1630c599d 100644 --- a/target/linux/bcm27xx/bcm2709/config-5.4 +++ b/target/linux/bcm27xx/bcm2709/config-5.4 @@ -311,6 +311,8 @@ CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_HOTPLUG_CPU=y CONFIG_HW_CONSOLE=y +CONFIG_HZ=100 +CONFIG_HZ_100=y CONFIG_HZ_FIXED=0 CONFIG_I2C=y # CONFIG_I2C_BCM2708 is not set diff --git a/target/linux/bcm27xx/bcm2710/config-5.4 b/target/linux/bcm27xx/bcm2710/config-5.4 index a04d519b13..4a5b491b0f 100644 --- a/target/linux/bcm27xx/bcm2710/config-5.4 +++ b/target/linux/bcm27xx/bcm2710/config-5.4 @@ -367,6 +367,8 @@ CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HOLES_IN_ZONE=y CONFIG_HOTPLUG_CPU=y CONFIG_HW_CONSOLE=y +CONFIG_HZ=250 +CONFIG_HZ_250=y CONFIG_I2C=y # CONFIG_I2C_BCM2708 is not set CONFIG_I2C_BOARDINFO=y diff --git a/target/linux/bcm27xx/bcm2711/config-5.4 b/target/linux/bcm27xx/bcm2711/config-5.4 index 0b0e49ad62..abf6e8844a 100644 --- a/target/linux/bcm27xx/bcm2711/config-5.4 +++ b/target/linux/bcm27xx/bcm2711/config-5.4 @@ -373,6 +373,8 @@ CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HOLES_IN_ZONE=y CONFIG_HOTPLUG_CPU=y CONFIG_HW_CONSOLE=y +CONFIG_HZ=250 +CONFIG_HZ_250=y CONFIG_I2C=y # CONFIG_I2C_BCM2708 is not set CONFIG_I2C_BOARDINFO=y diff --git a/target/linux/bcm27xx/patches-5.4/950-0436-ARM-dts-overlays-Create-custom-clocks-in.patch b/target/linux/bcm27xx/patches-5.4/950-0435-ARM-dts-overlays-Create-custom-clocks-in.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0436-ARM-dts-overlays-Create-custom-clocks-in.patch rename to target/linux/bcm27xx/patches-5.4/950-0435-ARM-dts-overlays-Create-custom-clocks-in.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0437-staging-vc04_services-Fix-vcsm-overflow-bug-when-cou.patch b/target/linux/bcm27xx/patches-5.4/950-0436-staging-vc04_services-Fix-vcsm-overflow-bug-when-cou.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0437-staging-vc04_services-Fix-vcsm-overflow-bug-when-cou.patch rename to target/linux/bcm27xx/patches-5.4/950-0436-staging-vc04_services-Fix-vcsm-overflow-bug-when-cou.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0438-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch b/target/linux/bcm27xx/patches-5.4/950-0437-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0438-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch rename to target/linux/bcm27xx/patches-5.4/950-0437-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0439-of-overlay-Correct-symbol-path-fixups.patch b/target/linux/bcm27xx/patches-5.4/950-0438-of-overlay-Correct-symbol-path-fixups.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0439-of-overlay-Correct-symbol-path-fixups.patch rename to target/linux/bcm27xx/patches-5.4/950-0438-of-overlay-Correct-symbol-path-fixups.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0440-overlays-sc16ic750-i2c-Fix-xtal-parameter.patch b/target/linux/bcm27xx/patches-5.4/950-0439-overlays-sc16ic750-i2c-Fix-xtal-parameter.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0440-overlays-sc16ic750-i2c-Fix-xtal-parameter.patch rename to target/linux/bcm27xx/patches-5.4/950-0439-overlays-sc16ic750-i2c-Fix-xtal-parameter.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0441-of-address-Introduce-of_get_next_dma_parent-helper.patch b/target/linux/bcm27xx/patches-5.4/950-0440-of-address-Introduce-of_get_next_dma_parent-helper.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0441-of-address-Introduce-of_get_next_dma_parent-helper.patch rename to target/linux/bcm27xx/patches-5.4/950-0440-of-address-Introduce-of_get_next_dma_parent-helper.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0442-of-address-Follow-DMA-parent-for-dma-coherent.patch b/target/linux/bcm27xx/patches-5.4/950-0441-of-address-Follow-DMA-parent-for-dma-coherent.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0442-of-address-Follow-DMA-parent-for-dma-coherent.patch rename to target/linux/bcm27xx/patches-5.4/950-0441-of-address-Follow-DMA-parent-for-dma-coherent.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0443-of-Factor-out-addr-size-cells-parsing.patch b/target/linux/bcm27xx/patches-5.4/950-0442-of-Factor-out-addr-size-cells-parsing.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0443-of-Factor-out-addr-size-cells-parsing.patch rename to target/linux/bcm27xx/patches-5.4/950-0442-of-Factor-out-addr-size-cells-parsing.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0444-of-address-Translate-dma-ranges-for-parent-nodes-mis.patch b/target/linux/bcm27xx/patches-5.4/950-0443-of-address-Translate-dma-ranges-for-parent-nodes-mis.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0444-of-address-Translate-dma-ranges-for-parent-nodes-mis.patch rename to target/linux/bcm27xx/patches-5.4/950-0443-of-address-Translate-dma-ranges-for-parent-nodes-mis.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0445-of-Make-of_dma_get_range-work-on-bus-nodes.patch b/target/linux/bcm27xx/patches-5.4/950-0444-of-Make-of_dma_get_range-work-on-bus-nodes.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0445-of-Make-of_dma_get_range-work-on-bus-nodes.patch rename to target/linux/bcm27xx/patches-5.4/950-0444-of-Make-of_dma_get_range-work-on-bus-nodes.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0446-arm64-mm-use-arm64_dma_phys_limit-instead-of-calling.patch b/target/linux/bcm27xx/patches-5.4/950-0445-arm64-mm-use-arm64_dma_phys_limit-instead-of-calling.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0446-arm64-mm-use-arm64_dma_phys_limit-instead-of-calling.patch rename to target/linux/bcm27xx/patches-5.4/950-0445-arm64-mm-use-arm64_dma_phys_limit-instead-of-calling.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0447-arm64-rename-variables-used-to-calculate-ZONE_DMA32-.patch b/target/linux/bcm27xx/patches-5.4/950-0446-arm64-rename-variables-used-to-calculate-ZONE_DMA32-.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0447-arm64-rename-variables-used-to-calculate-ZONE_DMA32-.patch rename to target/linux/bcm27xx/patches-5.4/950-0446-arm64-rename-variables-used-to-calculate-ZONE_DMA32-.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0448-arm64-use-both-ZONE_DMA-and-ZONE_DMA32.patch b/target/linux/bcm27xx/patches-5.4/950-0447-arm64-use-both-ZONE_DMA-and-ZONE_DMA32.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0448-arm64-use-both-ZONE_DMA-and-ZONE_DMA32.patch rename to target/linux/bcm27xx/patches-5.4/950-0447-arm64-use-both-ZONE_DMA-and-ZONE_DMA32.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0449-mm-refresh-ZONE_DMA-and-ZONE_DMA32-comments-in-enum-.patch b/target/linux/bcm27xx/patches-5.4/950-0448-mm-refresh-ZONE_DMA-and-ZONE_DMA32-comments-in-enum-.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0449-mm-refresh-ZONE_DMA-and-ZONE_DMA32-comments-in-enum-.patch rename to target/linux/bcm27xx/patches-5.4/950-0448-mm-refresh-ZONE_DMA-and-ZONE_DMA32-comments-in-enum-.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0450-resource-Add-a-resource_list_first_type-helper.patch b/target/linux/bcm27xx/patches-5.4/950-0449-resource-Add-a-resource_list_first_type-helper.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0450-resource-Add-a-resource_list_first_type-helper.patch rename to target/linux/bcm27xx/patches-5.4/950-0449-resource-Add-a-resource_list_first_type-helper.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0451-dma-direct-turn-ARCH_ZONE_DMA_BITS-into-a-variable.patch b/target/linux/bcm27xx/patches-5.4/950-0450-dma-direct-turn-ARCH_ZONE_DMA_BITS-into-a-variable.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0451-dma-direct-turn-ARCH_ZONE_DMA_BITS-into-a-variable.patch rename to target/linux/bcm27xx/patches-5.4/950-0450-dma-direct-turn-ARCH_ZONE_DMA_BITS-into-a-variable.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0452-x86-PCI-sta2x11-use-default-DMA-address-translation.patch b/target/linux/bcm27xx/patches-5.4/950-0451-x86-PCI-sta2x11-use-default-DMA-address-translation.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0452-x86-PCI-sta2x11-use-default-DMA-address-translation.patch rename to target/linux/bcm27xx/patches-5.4/950-0451-x86-PCI-sta2x11-use-default-DMA-address-translation.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0453-PCI-of-Add-inbound-resource-parsing-to-helpers.patch b/target/linux/bcm27xx/patches-5.4/950-0452-PCI-of-Add-inbound-resource-parsing-to-helpers.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0453-PCI-of-Add-inbound-resource-parsing-to-helpers.patch rename to target/linux/bcm27xx/patches-5.4/950-0452-PCI-of-Add-inbound-resource-parsing-to-helpers.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0454-dma-direct-unify-the-dma_capable-definitions.patch b/target/linux/bcm27xx/patches-5.4/950-0453-dma-direct-unify-the-dma_capable-definitions.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0454-dma-direct-unify-the-dma_capable-definitions.patch rename to target/linux/bcm27xx/patches-5.4/950-0453-dma-direct-unify-the-dma_capable-definitions.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0455-dma-direct-avoid-a-forward-declaration-for-phys_to_d.patch b/target/linux/bcm27xx/patches-5.4/950-0454-dma-direct-avoid-a-forward-declaration-for-phys_to_d.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0455-dma-direct-avoid-a-forward-declaration-for-phys_to_d.patch rename to target/linux/bcm27xx/patches-5.4/950-0454-dma-direct-avoid-a-forward-declaration-for-phys_to_d.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0456-dma-direct-exclude-dma_direct_map_resource-from-the-.patch b/target/linux/bcm27xx/patches-5.4/950-0455-dma-direct-exclude-dma_direct_map_resource-from-the-.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0456-dma-direct-exclude-dma_direct_map_resource-from-the-.patch rename to target/linux/bcm27xx/patches-5.4/950-0455-dma-direct-exclude-dma_direct_map_resource-from-the-.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0457-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch b/target/linux/bcm27xx/patches-5.4/950-0456-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0457-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch rename to target/linux/bcm27xx/patches-5.4/950-0456-dma-mapping-treat-dev-bus_dma_mask-as-a-DMA-limit.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0458-ARM-dts-bcm2711-Enable-PCIe-controller.patch b/target/linux/bcm27xx/patches-5.4/950-0457-ARM-dts-bcm2711-Enable-PCIe-controller.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0458-ARM-dts-bcm2711-Enable-PCIe-controller.patch rename to target/linux/bcm27xx/patches-5.4/950-0457-ARM-dts-bcm2711-Enable-PCIe-controller.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch b/target/linux/bcm27xx/patches-5.4/950-0458-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch rename to target/linux/bcm27xx/patches-5.4/950-0458-PCI-brcmstb-Add-Broadcom-STB-PCIe-host-controller-dr.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0460-PCI-brcmstb-Add-MSI-support.patch b/target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-MSI-support.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0460-PCI-brcmstb-Add-MSI-support.patch rename to target/linux/bcm27xx/patches-5.4/950-0459-PCI-brcmstb-Add-MSI-support.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0461-PCI-brcmstb-Fix-build-on-32bit-ARM-platforms-with-ol.patch b/target/linux/bcm27xx/patches-5.4/950-0460-PCI-brcmstb-Fix-build-on-32bit-ARM-platforms-with-ol.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0461-PCI-brcmstb-Fix-build-on-32bit-ARM-platforms-with-ol.patch rename to target/linux/bcm27xx/patches-5.4/950-0460-PCI-brcmstb-Fix-build-on-32bit-ARM-platforms-with-ol.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0462-bcm2711-rpi.dtsi-Use-upstream-pcie-node.patch b/target/linux/bcm27xx/patches-5.4/950-0461-bcm2711-rpi.dtsi-Use-upstream-pcie-node.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0462-bcm2711-rpi.dtsi-Use-upstream-pcie-node.patch rename to target/linux/bcm27xx/patches-5.4/950-0461-bcm2711-rpi.dtsi-Use-upstream-pcie-node.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0463-media-dt-bindings-media-i2c-Add-IMX219-CMOS-sensor-b.patch b/target/linux/bcm27xx/patches-5.4/950-0462-media-dt-bindings-media-i2c-Add-IMX219-CMOS-sensor-b.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0463-media-dt-bindings-media-i2c-Add-IMX219-CMOS-sensor-b.patch rename to target/linux/bcm27xx/patches-5.4/950-0462-media-dt-bindings-media-i2c-Add-IMX219-CMOS-sensor-b.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0464-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch b/target/linux/bcm27xx/patches-5.4/950-0463-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0464-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch rename to target/linux/bcm27xx/patches-5.4/950-0463-media-i2c-Add-driver-for-Sony-IMX219-sensor.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0465-overlays-imx219-Correct-link-frequency-to-match-the-.patch b/target/linux/bcm27xx/patches-5.4/950-0464-overlays-imx219-Correct-link-frequency-to-match-the-.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0465-overlays-imx219-Correct-link-frequency-to-match-the-.patch rename to target/linux/bcm27xx/patches-5.4/950-0464-overlays-imx219-Correct-link-frequency-to-match-the-.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0466-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch b/target/linux/bcm27xx/patches-5.4/950-0465-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0466-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch rename to target/linux/bcm27xx/patches-5.4/950-0465-Kbuild-Allow-.dtbo-overlays-to-be-built-adjust.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0467-media-ov5647-Fix-return-codes-from-ov5647_write-ov56.patch b/target/linux/bcm27xx/patches-5.4/950-0466-media-ov5647-Fix-return-codes-from-ov5647_write-ov56.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0467-media-ov5647-Fix-return-codes-from-ov5647_write-ov56.patch rename to target/linux/bcm27xx/patches-5.4/950-0466-media-ov5647-Fix-return-codes-from-ov5647_write-ov56.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0468-media-ov5647-Add-basic-support-for-multiple-sensor-m.patch b/target/linux/bcm27xx/patches-5.4/950-0467-media-ov5647-Add-basic-support-for-multiple-sensor-m.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0468-media-ov5647-Add-basic-support-for-multiple-sensor-m.patch rename to target/linux/bcm27xx/patches-5.4/950-0467-media-ov5647-Add-basic-support-for-multiple-sensor-m.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0469-media-ov5647-Add-V4L2-controls-for-analogue-gain-exp.patch b/target/linux/bcm27xx/patches-5.4/950-0468-media-ov5647-Add-V4L2-controls-for-analogue-gain-exp.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0469-media-ov5647-Add-V4L2-controls-for-analogue-gain-exp.patch rename to target/linux/bcm27xx/patches-5.4/950-0468-media-ov5647-Add-V4L2-controls-for-analogue-gain-exp.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0470-media-ov5647-Add-extra-10-bit-sensor-modes.patch b/target/linux/bcm27xx/patches-5.4/950-0469-media-ov5647-Add-extra-10-bit-sensor-modes.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0470-media-ov5647-Add-extra-10-bit-sensor-modes.patch rename to target/linux/bcm27xx/patches-5.4/950-0469-media-ov5647-Add-extra-10-bit-sensor-modes.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0471-media-ov5647-change-defaults-to-better-match-raw-cam.patch b/target/linux/bcm27xx/patches-5.4/950-0470-media-ov5647-change-defaults-to-better-match-raw-cam.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0471-media-ov5647-change-defaults-to-better-match-raw-cam.patch rename to target/linux/bcm27xx/patches-5.4/950-0470-media-ov5647-change-defaults-to-better-match-raw-cam.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0472-drm-vc4-fkms-Change-crtc_state-structure-name-to-avo.patch b/target/linux/bcm27xx/patches-5.4/950-0471-drm-vc4-fkms-Change-crtc_state-structure-name-to-avo.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0472-drm-vc4-fkms-Change-crtc_state-structure-name-to-avo.patch rename to target/linux/bcm27xx/patches-5.4/950-0471-drm-vc4-fkms-Change-crtc_state-structure-name-to-avo.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0473-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch b/target/linux/bcm27xx/patches-5.4/950-0472-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0473-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch rename to target/linux/bcm27xx/patches-5.4/950-0472-drm-fourcc-Add-packed-10bit-YUV-4-2-0-format.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0474-drm-vc4-Add-DRM_FORMAT_P030-support-to-firmware-kms.patch b/target/linux/bcm27xx/patches-5.4/950-0473-drm-vc4-Add-DRM_FORMAT_P030-support-to-firmware-kms.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0474-drm-vc4-Add-DRM_FORMAT_P030-support-to-firmware-kms.patch rename to target/linux/bcm27xx/patches-5.4/950-0473-drm-vc4-Add-DRM_FORMAT_P030-support-to-firmware-kms.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0475-gpio-ir-overlay-add-parameter-to-configure-signal-po.patch b/target/linux/bcm27xx/patches-5.4/950-0474-gpio-ir-overlay-add-parameter-to-configure-signal-po.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0475-gpio-ir-overlay-add-parameter-to-configure-signal-po.patch rename to target/linux/bcm27xx/patches-5.4/950-0474-gpio-ir-overlay-add-parameter-to-configure-signal-po.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0476-Add-support-for-merus-amp-soundcard-and-ma120x0p-cod.patch b/target/linux/bcm27xx/patches-5.4/950-0475-Add-support-for-merus-amp-soundcard-and-ma120x0p-cod.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0476-Add-support-for-merus-amp-soundcard-and-ma120x0p-cod.patch rename to target/linux/bcm27xx/patches-5.4/950-0475-Add-support-for-merus-amp-soundcard-and-ma120x0p-cod.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0477-ARM-dts-bcm2711-Add-32-bit-PMU-compatibility.patch b/target/linux/bcm27xx/patches-5.4/950-0476-ARM-dts-bcm2711-Add-32-bit-PMU-compatibility.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0477-ARM-dts-bcm2711-Add-32-bit-PMU-compatibility.patch rename to target/linux/bcm27xx/patches-5.4/950-0476-ARM-dts-bcm2711-Add-32-bit-PMU-compatibility.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0478-ARM-dts-bcm271x-Use-a53-pmu-drop-RPI364.patch b/target/linux/bcm27xx/patches-5.4/950-0477-ARM-dts-bcm271x-Use-a53-pmu-drop-RPI364.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0478-ARM-dts-bcm271x-Use-a53-pmu-drop-RPI364.patch rename to target/linux/bcm27xx/patches-5.4/950-0477-ARM-dts-bcm271x-Use-a53-pmu-drop-RPI364.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0479-net-bcmgenet-Clear-ID_MODE_DIS-in-EXT_RGMII_OOB_CTRL.patch b/target/linux/bcm27xx/patches-5.4/950-0478-net-bcmgenet-Clear-ID_MODE_DIS-in-EXT_RGMII_OOB_CTRL.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0479-net-bcmgenet-Clear-ID_MODE_DIS-in-EXT_RGMII_OOB_CTRL.patch rename to target/linux/bcm27xx/patches-5.4/950-0478-net-bcmgenet-Clear-ID_MODE_DIS-in-EXT_RGMII_OOB_CTRL.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0480-drm-modes-parse_cmdline-Fix-possible-reference-past-.patch b/target/linux/bcm27xx/patches-5.4/950-0479-drm-modes-parse_cmdline-Fix-possible-reference-past-.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0480-drm-modes-parse_cmdline-Fix-possible-reference-past-.patch rename to target/linux/bcm27xx/patches-5.4/950-0479-drm-modes-parse_cmdline-Fix-possible-reference-past-.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0481-drm-modes-parse_cmdline-Make-various-char-pointers-c.patch b/target/linux/bcm27xx/patches-5.4/950-0480-drm-modes-parse_cmdline-Make-various-char-pointers-c.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0481-drm-modes-parse_cmdline-Make-various-char-pointers-c.patch rename to target/linux/bcm27xx/patches-5.4/950-0480-drm-modes-parse_cmdline-Make-various-char-pointers-c.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0482-drm-modes-parse_cmdline-Stop-parsing-extras-after-bp.patch b/target/linux/bcm27xx/patches-5.4/950-0481-drm-modes-parse_cmdline-Stop-parsing-extras-after-bp.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0482-drm-modes-parse_cmdline-Stop-parsing-extras-after-bp.patch rename to target/linux/bcm27xx/patches-5.4/950-0481-drm-modes-parse_cmdline-Stop-parsing-extras-after-bp.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0483-drm-modes-parse_cmdline-Accept-extras-directly-after.patch b/target/linux/bcm27xx/patches-5.4/950-0482-drm-modes-parse_cmdline-Accept-extras-directly-after.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0483-drm-modes-parse_cmdline-Accept-extras-directly-after.patch rename to target/linux/bcm27xx/patches-5.4/950-0482-drm-modes-parse_cmdline-Accept-extras-directly-after.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0484-drm-modes-parse_cmdline-Rework-drm_mode_parse_cmdlin.patch b/target/linux/bcm27xx/patches-5.4/950-0483-drm-modes-parse_cmdline-Rework-drm_mode_parse_cmdlin.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0484-drm-modes-parse_cmdline-Rework-drm_mode_parse_cmdlin.patch rename to target/linux/bcm27xx/patches-5.4/950-0483-drm-modes-parse_cmdline-Rework-drm_mode_parse_cmdlin.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0485-drm-modes-parse_cmdline-Add-freestanding-argument-to.patch b/target/linux/bcm27xx/patches-5.4/950-0484-drm-modes-parse_cmdline-Add-freestanding-argument-to.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0485-drm-modes-parse_cmdline-Add-freestanding-argument-to.patch rename to target/linux/bcm27xx/patches-5.4/950-0484-drm-modes-parse_cmdline-Add-freestanding-argument-to.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0486-drm-modes-parse_cmdline-Set-bpp-refresh_specified-af.patch b/target/linux/bcm27xx/patches-5.4/950-0485-drm-modes-parse_cmdline-Set-bpp-refresh_specified-af.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0486-drm-modes-parse_cmdline-Set-bpp-refresh_specified-af.patch rename to target/linux/bcm27xx/patches-5.4/950-0485-drm-modes-parse_cmdline-Set-bpp-refresh_specified-af.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0487-drm-modes-parse_cmdline-Allow-specifying-stand-alone.patch b/target/linux/bcm27xx/patches-5.4/950-0486-drm-modes-parse_cmdline-Allow-specifying-stand-alone.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0487-drm-modes-parse_cmdline-Allow-specifying-stand-alone.patch rename to target/linux/bcm27xx/patches-5.4/950-0486-drm-modes-parse_cmdline-Allow-specifying-stand-alone.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0488-drm-modes-parse_cmdline-Add-support-for-specifying-p.patch b/target/linux/bcm27xx/patches-5.4/950-0487-drm-modes-parse_cmdline-Add-support-for-specifying-p.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0488-drm-modes-parse_cmdline-Add-support-for-specifying-p.patch rename to target/linux/bcm27xx/patches-5.4/950-0487-drm-modes-parse_cmdline-Add-support-for-specifying-p.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0489-drm-modes-parse_cmdline-Remove-some-unnecessary-code.patch b/target/linux/bcm27xx/patches-5.4/950-0488-drm-modes-parse_cmdline-Remove-some-unnecessary-code.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0489-drm-modes-parse_cmdline-Remove-some-unnecessary-code.patch rename to target/linux/bcm27xx/patches-5.4/950-0488-drm-modes-parse_cmdline-Remove-some-unnecessary-code.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0490-drm-modes-parse_cmdline-Explicitly-memset-the-passed.patch b/target/linux/bcm27xx/patches-5.4/950-0489-drm-modes-parse_cmdline-Explicitly-memset-the-passed.patch similarity index 100% rename from target/linux/bcm27xx/patches-5.4/950-0490-drm-modes-parse_cmdline-Explicitly-memset-the-passed.patch rename to target/linux/bcm27xx/patches-5.4/950-0489-drm-modes-parse_cmdline-Explicitly-memset-the-passed.patch diff --git a/target/linux/bcm27xx/patches-5.4/950-0490-drm-v3d-Replace-wait_for-macros-to-remove-use-of-msl.patch b/target/linux/bcm27xx/patches-5.4/950-0490-drm-v3d-Replace-wait_for-macros-to-remove-use-of-msl.patch new file mode 100644 index 0000000000..830bc1125e --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0490-drm-v3d-Replace-wait_for-macros-to-remove-use-of-msl.patch @@ -0,0 +1,89 @@ +From 12b60ef71cc005ee7290f692169d46a7e78df01a Mon Sep 17 00:00:00 2001 +From: Yukimasa Sugizaki <4298265+Terminus-IMRC@users.noreply.github.com> +Date: Fri, 20 Mar 2020 19:01:23 +0900 +Subject: [PATCH] drm/v3d: Replace wait_for macros to remove use of + msleep (#3510) + +commit 9daee6141cc9c75b09659b02b1cb9eeb2f5e16cc upstream. + +The wait_for macro's for Broadcom V3D driver used msleep, which is +inappropriate due to its inaccuracy at low values (minimum wait time +is about 30ms on the Raspberry Pi). This sleep was triggering in +v3d_clean_caches(), causing us to only be able to dispatch ~33 compute +jobs per second. + +This patch replaces the macro with the one from the Intel i915 version +which uses usleep_range to provide more accurate waits. + +v2: Split from the vc4 patch so that we can confidently apply to + stable (by anholt) + +Signed-off-by: James Hughes +Signed-off-by: Eric Anholt +Link: https://patchwork.freedesktop.org/patch/msgid/20200217153145.13780-1-james.hughes@raspberrypi.com +Link: https://github.com/raspberrypi/linux/issues/3460 +Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") + +Co-authored-by: James Hughes +--- + drivers/gpu/drm/v3d/v3d_drv.h | 41 ++++++++++++++++++++++++----------- + 1 file changed, 28 insertions(+), 13 deletions(-) + +--- a/drivers/gpu/drm/v3d/v3d_drv.h ++++ b/drivers/gpu/drm/v3d/v3d_drv.h +@@ -260,27 +260,42 @@ struct v3d_csd_job { + }; + + /** +- * _wait_for - magic (register) wait macro ++ * __wait_for - magic wait macro + * +- * Does the right thing for modeset paths when run under kdgb or similar atomic +- * contexts. Note that it's important that we check the condition again after +- * having timed out, since the timeout could be due to preemption or similar and +- * we've never had a chance to check the condition before the timeout. ++ * Macro to help avoid open coding check/wait/timeout patterns. Note that it's ++ * important that we check the condition again after having timed out, since the ++ * timeout could be due to preemption or similar and we've never had a chance to ++ * check the condition before the timeout. + */ +-#define wait_for(COND, MS) ({ \ +- unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \ +- int ret__ = 0; \ +- while (!(COND)) { \ +- if (time_after(jiffies, timeout__)) { \ +- if (!(COND)) \ +- ret__ = -ETIMEDOUT; \ ++#define __wait_for(OP, COND, US, Wmin, Wmax) ({ \ ++ const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \ ++ long wait__ = (Wmin); /* recommended min for usleep is 10 us */ \ ++ int ret__; \ ++ might_sleep(); \ ++ for (;;) { \ ++ const bool expired__ = ktime_after(ktime_get_raw(), end__); \ ++ OP; \ ++ /* Guarantee COND check prior to timeout */ \ ++ barrier(); \ ++ if (COND) { \ ++ ret__ = 0; \ + break; \ + } \ +- msleep(1); \ ++ if (expired__) { \ ++ ret__ = -ETIMEDOUT; \ ++ break; \ ++ } \ ++ usleep_range(wait__, wait__ * 2); \ ++ if (wait__ < (Wmax)) \ ++ wait__ <<= 1; \ + } \ + ret__; \ + }) + ++#define _wait_for(COND, US, Wmin, Wmax) __wait_for(, (COND), (US), (Wmin), \ ++ (Wmax)) ++#define wait_for(COND, MS) _wait_for((COND), (MS) * 1000, 10, 1000) ++ + static inline unsigned long nsecs_to_jiffies_timeout(const u64 n) + { + /* nsecs_to_jiffies64() does not guard against overflow */ diff --git a/target/linux/bcm27xx/patches-5.4/950-0491-Reduce-noise-from-rpi-poe-hat-fan.patch b/target/linux/bcm27xx/patches-5.4/950-0491-Reduce-noise-from-rpi-poe-hat-fan.patch new file mode 100644 index 0000000000..7c50843102 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0491-Reduce-noise-from-rpi-poe-hat-fan.patch @@ -0,0 +1,96 @@ +From 863dace20e48954a7e013a2e88e27c692ce165b0 Mon Sep 17 00:00:00 2001 +From: Nick B +Date: Mon, 9 Mar 2020 09:05:39 -0400 +Subject: [PATCH] Reduce noise from rpi poe hat fan + +This adds 2 extra states, at 40c and 45c, with PWM of 31 and 63 (out +of 255) for the rpi poe hat fan. This significantly improves user +experience by providing a smoother ramp up of the fan, from a pwm 0 +to 31 to 63 then finally to 150, and additionally makes it very easy +for users to further tweak the values as needed for their specific +application. + +The possible concerns I have are that a hysteresis of 2000 (2c) could +be too narrow, and that running the fan more at a reduced temperature +(40000 - 40c) could cause problems. + +Signed-off-by: Nick B +--- + .../arm/boot/dts/overlays/rpi-poe-overlay.dts | 35 ++++++++++++++++--- + 1 file changed, 30 insertions(+), 5 deletions(-) + +--- a/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts ++++ b/arch/arm/boot/dts/overlays/rpi-poe-overlay.dts +@@ -14,9 +14,9 @@ + compatible = "raspberrypi,rpi-poe-fan"; + firmware = <&firmware>; + cooling-min-state = <0>; +- cooling-max-state = <2>; ++ cooling-max-state = <4>; + #cooling-cells = <2>; +- cooling-levels = <0 150 255>; ++ cooling-levels = <0 31 63 150 255>; + status = "okay"; + }; + }; +@@ -27,12 +27,21 @@ + __overlay__ { + trips { + trip0: trip0 { +- temperature = <50000>; +- hysteresis = <5000>; ++ temperature = <40000>; ++ hysteresis = <2000>; + type = "active"; + }; + trip1: trip1 { +- ++ temperature = <45000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ trip2: trip2 { ++ temperature = <50000>; ++ hysteresis = <2000>; ++ type = "active"; ++ }; ++ trip3: trip3 { + temperature = <55000>; + hysteresis = <5000>; + type = "active"; +@@ -47,6 +56,14 @@ + trip = <&trip1>; + cooling-device = <&fan0 1 2>; + }; ++ map2 { ++ trip = <&trip2>; ++ cooling-device = <&fan0 2 3>; ++ }; ++ map3 { ++ trip = <&trip3>; ++ cooling-device = <&fan0 3 4>; ++ }; + }; + }; + }; +@@ -58,6 +75,10 @@ + poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; + poe_fan_temp1 = <&trip1>,"temperature:0"; + poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; ++ poe_fan_temp2 = <&trip2>,"temperature:0"; ++ poe_fan_temp2_hyst = <&trip2>,"hysteresis:0"; ++ poe_fan_temp3 = <&trip3>,"temperature:0"; ++ poe_fan_temp3_hyst = <&trip3>,"hysteresis:0"; + }; + }; + +@@ -66,5 +87,9 @@ + poe_fan_temp0_hyst = <&trip0>,"hysteresis:0"; + poe_fan_temp1 = <&trip1>,"temperature:0"; + poe_fan_temp1_hyst = <&trip1>,"hysteresis:0"; ++ poe_fan_temp2 = <&trip2>,"temperature:0"; ++ poe_fan_temp2_hyst = <&trip2>,"hysteresis:0"; ++ poe_fan_temp3 = <&trip3>,"temperature:0"; ++ poe_fan_temp3_hyst = <&trip3>,"hysteresis:0"; + }; + }; diff --git a/target/linux/bcm27xx/patches-5.4/950-0491-add-Sensirion-SPS30-to-i2c-sensor-overlay.patch b/target/linux/bcm27xx/patches-5.4/950-0492-add-Sensirion-SPS30-to-i2c-sensor-overlay.patch similarity index 77% rename from target/linux/bcm27xx/patches-5.4/950-0491-add-Sensirion-SPS30-to-i2c-sensor-overlay.patch rename to target/linux/bcm27xx/patches-5.4/950-0492-add-Sensirion-SPS30-to-i2c-sensor-overlay.patch index e85329aa08..72941b59bb 100644 --- a/target/linux/bcm27xx/patches-5.4/950-0491-add-Sensirion-SPS30-to-i2c-sensor-overlay.patch +++ b/target/linux/bcm27xx/patches-5.4/950-0492-add-Sensirion-SPS30-to-i2c-sensor-overlay.patch @@ -1,4 +1,4 @@ -From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 +From 60f3874207c50db6f6d9dbac40977843cb77acd5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Petr=20=C5=A0tetiar?= Date: Sat, 7 Mar 2020 22:37:52 +0100 Subject: [PATCH] add Sensirion SPS30 to i2c-sensor overlay @@ -10,12 +10,14 @@ Add support for Sensirion SPS30 particulate matter sensor with fixed address 0x69. Signed-off-by: Petr Štetiar +--- + arch/arm/boot/dts/overlays/README | 3 +++ + arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts | 15 +++++++++++++++ + 2 files changed, 18 insertions(+) -diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README -index 62ad35f78bad..0d7d00ac92c4 100644 --- a/arch/arm/boot/dts/overlays/README +++ b/arch/arm/boot/dts/overlays/README -@@ -1261,6 +1261,9 @@ Params: addr Set the address for the BME280, BME680, BMP280, +@@ -1261,6 +1261,9 @@ Params: addr Set the si7020 Select the Silicon Labs Si7013/20/21 humidity/ temperature sensor @@ -25,8 +27,6 @@ index 62ad35f78bad..0d7d00ac92c4 100644 tmp102 Select the Texas Instruments TMP102 temp sensor Valid addresses 0x48-0x4b, default 0x48 -diff --git a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -index 40881d72a157..ce97837b0db5 100644 --- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts @@ -231,6 +231,20 @@ diff --git a/target/linux/bcm27xx/patches-5.4/950-0493-media-add-V4L2_CTRL_TYPE_AREA-control-type.patch b/target/linux/bcm27xx/patches-5.4/950-0493-media-add-V4L2_CTRL_TYPE_AREA-control-type.patch new file mode 100644 index 0000000000..265533eb3a --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0493-media-add-V4L2_CTRL_TYPE_AREA-control-type.patch @@ -0,0 +1,157 @@ +From 4af6218f1d01e5ae54dc43e4bd2421617c777570 Mon Sep 17 00:00:00 2001 +From: Ricardo Ribalda Delgado +Date: Mon, 7 Oct 2019 12:06:31 -0300 +Subject: [PATCH] media: add V4L2_CTRL_TYPE_AREA control type + +Commit d1dc49370f8371b00e682ac409aa1987ce641e93 upstream. + +This type contains the width and the height of a rectangular area. + +Reviewed-by: Jacopo Mondi +Signed-off-by: Ricardo Ribalda Delgado +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + drivers/media/v4l2-core/v4l2-ctrls.c | 21 ++++++++++++++ + include/media/v4l2-ctrls.h | 42 ++++++++++++++++++++++++++++ + include/uapi/linux/videodev2.h | 6 ++++ + 3 files changed, 69 insertions(+) + +--- a/drivers/media/v4l2-core/v4l2-ctrls.c ++++ b/drivers/media/v4l2-core/v4l2-ctrls.c +@@ -1673,6 +1673,7 @@ static int std_validate_compound(const s + { + struct v4l2_ctrl_mpeg2_slice_params *p_mpeg2_slice_params; + struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header; ++ struct v4l2_area *area; + void *p = ptr.p + idx * ctrl->elem_size; + + switch ((u32)ctrl->type) { +@@ -1749,6 +1750,11 @@ static int std_validate_compound(const s + zero_padding(p_vp8_frame_header->entropy_header); + zero_padding(p_vp8_frame_header->coder_state); + break; ++ case V4L2_CTRL_TYPE_AREA: ++ area = p; ++ if (!area->width || !area->height) ++ return -EINVAL; ++ break; + default: + return -EINVAL; + } +@@ -2422,6 +2428,9 @@ static struct v4l2_ctrl *v4l2_ctrl_new(s + case V4L2_CTRL_TYPE_VP8_FRAME_HEADER: + elem_size = sizeof(struct v4l2_ctrl_vp8_frame_header); + break; ++ case V4L2_CTRL_TYPE_AREA: ++ elem_size = sizeof(struct v4l2_area); ++ break; + default: + if (type < V4L2_CTRL_COMPOUND_TYPES) + elem_size = sizeof(s32); +@@ -4086,6 +4095,18 @@ int __v4l2_ctrl_s_ctrl_string(struct v4l + } + EXPORT_SYMBOL(__v4l2_ctrl_s_ctrl_string); + ++int __v4l2_ctrl_s_ctrl_area(struct v4l2_ctrl *ctrl, ++ const struct v4l2_area *area) ++{ ++ lockdep_assert_held(ctrl->handler->lock); ++ ++ /* It's a driver bug if this happens. */ ++ WARN_ON(ctrl->type != V4L2_CTRL_TYPE_AREA); ++ *ctrl->p_new.p_area = *area; ++ return set_ctrl(NULL, ctrl, 0); ++} ++EXPORT_SYMBOL(__v4l2_ctrl_s_ctrl_area); ++ + void v4l2_ctrl_request_complete(struct media_request *req, + struct v4l2_ctrl_handler *main_hdl) + { +--- a/include/media/v4l2-ctrls.h ++++ b/include/media/v4l2-ctrls.h +@@ -50,6 +50,7 @@ struct poll_table_struct; + * @p_h264_slice_params: Pointer to a struct v4l2_ctrl_h264_slice_params. + * @p_h264_decode_params: Pointer to a struct v4l2_ctrl_h264_decode_params. + * @p_vp8_frame_header: Pointer to a VP8 frame header structure. ++ * @p_area: Pointer to an area. + * @p: Pointer to a compound value. + */ + union v4l2_ctrl_ptr { +@@ -68,6 +69,7 @@ union v4l2_ctrl_ptr { + struct v4l2_ctrl_h264_slice_params *p_h264_slice_params; + struct v4l2_ctrl_h264_decode_params *p_h264_decode_params; + struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header; ++ struct v4l2_area *p_area; + void *p; + }; + +@@ -1063,6 +1065,46 @@ static inline int v4l2_ctrl_s_ctrl_strin + v4l2_ctrl_unlock(ctrl); + + return rval; ++} ++ ++/** ++ * __v4l2_ctrl_s_ctrl_area() - Unlocked variant of v4l2_ctrl_s_ctrl_area(). ++ * ++ * @ctrl: The control. ++ * @area: The new area. ++ * ++ * This sets the control's new area safely by going through the control ++ * framework. This function assumes the control's handler is already locked, ++ * allowing it to be used from within the &v4l2_ctrl_ops functions. ++ * ++ * This function is for area type controls only. ++ */ ++int __v4l2_ctrl_s_ctrl_area(struct v4l2_ctrl *ctrl, ++ const struct v4l2_area *area); ++ ++/** ++ * v4l2_ctrl_s_ctrl_area() - Helper function to set a control's area value ++ * from within a driver. ++ * ++ * @ctrl: The control. ++ * @area: The new area. ++ * ++ * This sets the control's new area safely by going through the control ++ * framework. This function will lock the control's handler, so it cannot be ++ * used from within the &v4l2_ctrl_ops functions. ++ * ++ * This function is for area type controls only. ++ */ ++static inline int v4l2_ctrl_s_ctrl_area(struct v4l2_ctrl *ctrl, ++ const struct v4l2_area *area) ++{ ++ int rval; ++ ++ v4l2_ctrl_lock(ctrl); ++ rval = __v4l2_ctrl_s_ctrl_area(ctrl, area); ++ v4l2_ctrl_unlock(ctrl); ++ ++ return rval; + } + + /* Internal helper functions that deal with control events. */ +--- a/include/uapi/linux/videodev2.h ++++ b/include/uapi/linux/videodev2.h +@@ -427,6 +427,11 @@ struct v4l2_fract { + __u32 denominator; + }; + ++struct v4l2_area { ++ __u32 width; ++ __u32 height; ++}; ++ + /** + * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP + * +@@ -1725,6 +1730,7 @@ enum v4l2_ctrl_type { + V4L2_CTRL_TYPE_U8 = 0x0100, + V4L2_CTRL_TYPE_U16 = 0x0101, + V4L2_CTRL_TYPE_U32 = 0x0102, ++ V4L2_CTRL_TYPE_AREA = 0x0106, + }; + + /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ diff --git a/target/linux/bcm27xx/patches-5.4/950-0494-media-add-V4L2_CID_UNIT_CELL_SIZE-control.patch b/target/linux/bcm27xx/patches-5.4/950-0494-media-add-V4L2_CID_UNIT_CELL_SIZE-control.patch new file mode 100644 index 0000000000..0c860c7e4a --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0494-media-add-V4L2_CID_UNIT_CELL_SIZE-control.patch @@ -0,0 +1,52 @@ +From 12eba72027d415bb3dfd4c8124813a322b27c793 Mon Sep 17 00:00:00 2001 +From: Ricardo Ribalda Delgado +Date: Mon, 7 Oct 2019 12:06:33 -0300 +Subject: [PATCH] media: add V4L2_CID_UNIT_CELL_SIZE control + +Commit 61fd036d01111679b01e4b92e6bd0cdd33809aea upstream. + +This control returns the unit cell size in nanometres. The struct provides +the width and the height in separated fields to take into consideration +asymmetric pixels and/or hardware binning. +This control is required for automatic calibration of sensors/cameras. + +Reviewed-by: Philipp Zabel +Signed-off-by: Ricardo Ribalda Delgado +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + drivers/media/v4l2-core/v4l2-ctrls.c | 5 +++++ + include/uapi/linux/v4l2-controls.h | 1 + + 2 files changed, 6 insertions(+) + +--- a/drivers/media/v4l2-core/v4l2-ctrls.c ++++ b/drivers/media/v4l2-core/v4l2-ctrls.c +@@ -995,6 +995,7 @@ const char *v4l2_ctrl_get_name(u32 id) + case V4L2_CID_AUTO_FOCUS_RANGE: return "Auto Focus, Range"; + case V4L2_CID_PAN_SPEED: return "Pan, Speed"; + case V4L2_CID_TILT_SPEED: return "Tilt, Speed"; ++ case V4L2_CID_UNIT_CELL_SIZE: return "Unit Cell Size"; + + /* FM Radio Modulator controls */ + /* Keep the order of the 'case's the same as in v4l2-controls.h! */ +@@ -1376,6 +1377,10 @@ void v4l2_ctrl_fill(u32 id, const char * + case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER: + *type = V4L2_CTRL_TYPE_VP8_FRAME_HEADER; + break; ++ case V4L2_CID_UNIT_CELL_SIZE: ++ *type = V4L2_CTRL_TYPE_AREA; ++ *flags |= V4L2_CTRL_FLAG_READ_ONLY; ++ break; + default: + *type = V4L2_CTRL_TYPE_INTEGER; + break; +--- a/include/uapi/linux/v4l2-controls.h ++++ b/include/uapi/linux/v4l2-controls.h +@@ -1035,6 +1035,7 @@ enum v4l2_jpeg_chroma_subsampling { + #define V4L2_CID_TEST_PATTERN_GREENR (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 5) + #define V4L2_CID_TEST_PATTERN_BLUE (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 6) + #define V4L2_CID_TEST_PATTERN_GREENB (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 7) ++#define V4L2_CID_UNIT_CELL_SIZE (V4L2_CID_IMAGE_SOURCE_CLASS_BASE + 8) + + + /* Image processing controls */ diff --git a/target/linux/bcm27xx/patches-5.4/950-0495-media-v4l2-common-add-pixel-encoding-support.patch b/target/linux/bcm27xx/patches-5.4/950-0495-media-v4l2-common-add-pixel-encoding-support.patch new file mode 100644 index 0000000000..aa127ab5e7 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0495-media-v4l2-common-add-pixel-encoding-support.patch @@ -0,0 +1,228 @@ +From c63ea6a840ad87e32239eb6b771ac8bbc3279b54 Mon Sep 17 00:00:00 2001 +From: Benoit Parrot +Date: Mon, 7 Oct 2019 12:10:07 -0300 +Subject: [PATCH] media: v4l2-common: add pixel encoding support + +Commit d5a897c8428b38053df4b427a4277b1a0722bfa0 upstream. + +It is often useful to figure out if a pixel_format is either YUV or RGB +especially for driver who can perform the pixel encoding conversion. + +Instead of having each driver implement its own "is_this_yuv/rgb" +function based on a restricted set of pixel value, it is better to do +this in centralized manner. + +We therefore add a pixel_enc member to the v4l2_format_info structure to +quickly identify the related pixel encoding. +And add helper functions to check pixel encoding. + +Signed-off-by: Benoit Parrot +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + drivers/media/v4l2-core/v4l2-common.c | 126 +++++++++++++------------- + include/media/v4l2-common.h | 33 ++++++- + 2 files changed, 95 insertions(+), 64 deletions(-) + +--- a/drivers/media/v4l2-core/v4l2-common.c ++++ b/drivers/media/v4l2-core/v4l2-common.c +@@ -236,77 +236,77 @@ const struct v4l2_format_info *v4l2_form + { + static const struct v4l2_format_info formats[] = { + /* RGB formats */ +- { .format = V4L2_PIX_FMT_BGR24, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_RGB24, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_HSV24, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_BGR32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_XBGR32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_BGRX32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_RGB32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_XRGB32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_RGBX32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_HSV32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_ARGB32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_RGBA32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_ABGR32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_BGRA32, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_GREY, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_BGR24, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_RGB24, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_HSV24, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 3, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_BGR32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_XBGR32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_BGRX32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_RGB32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_XRGB32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_RGBX32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_HSV32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_ARGB32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_RGBA32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_ABGR32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_BGRA32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_GREY, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, + + /* YUV packed formats */ +- { .format = V4L2_PIX_FMT_YUYV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_YVYU, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_UYVY, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_VYUY, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_YUYV, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_YVYU, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_UYVY, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_VYUY, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 }, + + /* YUV planar formats */ +- { .format = V4L2_PIX_FMT_NV12, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 }, +- { .format = V4L2_PIX_FMT_NV21, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 }, +- { .format = V4L2_PIX_FMT_NV16, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_NV61, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_NV24, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_NV42, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- +- { .format = V4L2_PIX_FMT_YUV410, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 }, +- { .format = V4L2_PIX_FMT_YVU410, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 }, +- { .format = V4L2_PIX_FMT_YUV411P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_YUV420, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 }, +- { .format = V4L2_PIX_FMT_YVU420, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 }, +- { .format = V4L2_PIX_FMT_YUV422P, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_NV12, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 }, ++ { .format = V4L2_PIX_FMT_NV21, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 }, ++ { .format = V4L2_PIX_FMT_NV16, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_NV61, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_NV24, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_NV42, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ ++ { .format = V4L2_PIX_FMT_YUV410, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 }, ++ { .format = V4L2_PIX_FMT_YVU410, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 4 }, ++ { .format = V4L2_PIX_FMT_YUV411P, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 4, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_YUV420, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 }, ++ { .format = V4L2_PIX_FMT_YVU420, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 }, ++ { .format = V4L2_PIX_FMT_YUV422P, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 }, + + /* YUV planar formats, non contiguous variant */ +- { .format = V4L2_PIX_FMT_YUV420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 }, +- { .format = V4L2_PIX_FMT_YVU420M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 }, +- { .format = V4L2_PIX_FMT_YUV422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_YVU422M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_YUV444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_YVU444M, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 }, +- +- { .format = V4L2_PIX_FMT_NV12M, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 }, +- { .format = V4L2_PIX_FMT_NV21M, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 }, +- { .format = V4L2_PIX_FMT_NV16M, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_NV61M, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_YUV420M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 }, ++ { .format = V4L2_PIX_FMT_YVU420M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 2 }, ++ { .format = V4L2_PIX_FMT_YUV422M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_YVU422M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_YUV444M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_YVU444M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 3, .comp_planes = 3, .bpp = { 1, 1, 1, 0 }, .hdiv = 1, .vdiv = 1 }, ++ ++ { .format = V4L2_PIX_FMT_NV12M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 }, ++ { .format = V4L2_PIX_FMT_NV21M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 2 }, ++ { .format = V4L2_PIX_FMT_NV16M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_NV61M, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 2, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .hdiv = 2, .vdiv = 1 }, + + /* Bayer RGB formats */ +- { .format = V4L2_PIX_FMT_SBGGR8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGBRG8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGRBG8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SRGGB8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SBGGR10, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGBRG10, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGRBG10, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SRGGB10, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SBGGR10ALAW8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGBRG10ALAW8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGRBG10ALAW8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SRGGB10ALAW8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SBGGR10DPCM8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGBRG10DPCM8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGRBG10DPCM8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SRGGB10DPCM8, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SBGGR12, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGBRG12, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SGRBG12, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, +- { .format = V4L2_PIX_FMT_SRGGB12, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SBGGR8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGBRG8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGRBG8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SRGGB8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SBGGR10, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGBRG10, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGRBG10, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SRGGB10, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SBGGR10ALAW8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGBRG10ALAW8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGRBG10ALAW8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SRGGB10ALAW8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SBGGR10DPCM8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGBRG10DPCM8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGRBG10DPCM8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SRGGB10DPCM8, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SBGGR12, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGBRG12, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SGRBG12, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_SRGGB12, .pixel_enc = V4L2_PIXEL_ENC_BAYER, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, + }; + unsigned int i; + +--- a/include/media/v4l2-common.h ++++ b/include/media/v4l2-common.h +@@ -457,8 +457,24 @@ int v4l2_s_parm_cap(struct video_device + /* Pixel format and FourCC helpers */ + + /** ++ * enum v4l2_pixel_encoding - specifies the pixel encoding value ++ * ++ * @V4L2_PIXEL_ENC_UNKNOWN: Pixel encoding is unknown/un-initialized ++ * @V4L2_PIXEL_ENC_YUV: Pixel encoding is YUV ++ * @V4L2_PIXEL_ENC_RGB: Pixel encoding is RGB ++ * @V4L2_PIXEL_ENC_BAYER: Pixel encoding is Bayer ++ */ ++enum v4l2_pixel_encoding { ++ V4L2_PIXEL_ENC_UNKNOWN = 0, ++ V4L2_PIXEL_ENC_YUV = 1, ++ V4L2_PIXEL_ENC_RGB = 2, ++ V4L2_PIXEL_ENC_BAYER = 3, ++}; ++ ++/** + * struct v4l2_format_info - information about a V4L2 format + * @format: 4CC format identifier (V4L2_PIX_FMT_*) ++ * @pixel_enc: Pixel encoding (see enum v4l2_pixel_encoding above) + * @mem_planes: Number of memory planes, which includes the alpha plane (1 to 4). + * @comp_planes: Number of component planes, which includes the alpha plane (1 to 4). + * @bpp: Array of per-plane bytes per pixel +@@ -469,6 +485,7 @@ int v4l2_s_parm_cap(struct video_device + */ + struct v4l2_format_info { + u32 format; ++ u8 pixel_enc; + u8 mem_planes; + u8 comp_planes; + u8 bpp[4]; +@@ -478,8 +495,22 @@ struct v4l2_format_info { + u8 block_h[4]; + }; + +-const struct v4l2_format_info *v4l2_format_info(u32 format); ++static inline bool v4l2_is_format_rgb(const struct v4l2_format_info *f) ++{ ++ return f && f->pixel_enc == V4L2_PIXEL_ENC_RGB; ++} ++ ++static inline bool v4l2_is_format_yuv(const struct v4l2_format_info *f) ++{ ++ return f && f->pixel_enc == V4L2_PIXEL_ENC_YUV; ++} + ++static inline bool v4l2_is_format_bayer(const struct v4l2_format_info *f) ++{ ++ return f && f->pixel_enc == V4L2_PIXEL_ENC_BAYER; ++} ++ ++const struct v4l2_format_info *v4l2_format_info(u32 format); + void v4l2_apply_frmsize_constraints(u32 *width, u32 *height, + const struct v4l2_frmsize_stepwise *frmsize); + int v4l2_fill_pixfmt(struct v4l2_pix_format *pixfmt, u32 pixelformat, diff --git a/target/linux/bcm27xx/patches-5.4/950-0496-media-v4l2-common-add-RGB565-and-RGB55-to-v4l2_forma.patch b/target/linux/bcm27xx/patches-5.4/950-0496-media-v4l2-common-add-RGB565-and-RGB55-to-v4l2_forma.patch new file mode 100644 index 0000000000..0171cdf821 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0496-media-v4l2-common-add-RGB565-and-RGB55-to-v4l2_forma.patch @@ -0,0 +1,28 @@ +From 560f3a9051578499e72ce4b1beaedd007ff46f96 Mon Sep 17 00:00:00 2001 +From: Benoit Parrot +Date: Mon, 7 Oct 2019 12:10:08 -0300 +Subject: [PATCH] media: v4l2-common: add RGB565 and RGB55 to + v4l2_format_info + +Commit b373f84d77e1c409aacb4ff5bb5726c45fc8b166 upstream. + +Add RGB565 and RGB555 to the v4l2_format_info table. + +Signed-off-by: Benoit Parrot +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + drivers/media/v4l2-core/v4l2-common.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/media/v4l2-core/v4l2-common.c ++++ b/drivers/media/v4l2-core/v4l2-common.c +@@ -251,6 +251,8 @@ const struct v4l2_format_info *v4l2_form + { .format = V4L2_PIX_FMT_ABGR32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, + { .format = V4L2_PIX_FMT_BGRA32, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 4, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, + { .format = V4L2_PIX_FMT_GREY, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 1, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_RGB565, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, ++ { .format = V4L2_PIX_FMT_RGB555, .pixel_enc = V4L2_PIXEL_ENC_RGB, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 1, .vdiv = 1 }, + + /* YUV packed formats */ + { .format = V4L2_PIX_FMT_YUYV, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 1, .bpp = { 2, 0, 0, 0 }, .hdiv = 2, .vdiv = 1 }, diff --git a/target/linux/bcm27xx/patches-5.4/950-0497-media-vb2-add-V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF.patch b/target/linux/bcm27xx/patches-5.4/950-0497-media-vb2-add-V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF.patch new file mode 100644 index 0000000000..b114aefacc --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0497-media-vb2-add-V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF.patch @@ -0,0 +1,184 @@ +From dfcdc4ed9a514cd5d77dd18c6527f257f8aaf378 Mon Sep 17 00:00:00 2001 +From: Hans Verkuil +Date: Fri, 11 Oct 2019 06:32:40 -0300 +Subject: [PATCH] media: vb2: add V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF + +This patch adds support for the V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF +flag. + +It also adds a new V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF +capability. + +Drivers should set vb2_queue->subsystem_flags to +VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF to indicate support +for this flag. + +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + Documentation/media/uapi/v4l/buffer.rst | 13 +++++++++++++ + Documentation/media/uapi/v4l/vidioc-reqbufs.rst | 6 ++++++ + drivers/media/common/videobuf2/videobuf2-v4l2.c | 12 ++++++++++-- + include/media/videobuf2-core.h | 3 +++ + include/media/videobuf2-v4l2.h | 5 +++++ + include/uapi/linux/videodev2.h | 13 ++++++++----- + 6 files changed, 45 insertions(+), 7 deletions(-) + +--- a/Documentation/media/uapi/v4l/buffer.rst ++++ b/Documentation/media/uapi/v4l/buffer.rst +@@ -607,6 +607,19 @@ Buffer Flags + applications shall use this flag for output buffers if the data in + this buffer has not been created by the CPU but by some + DMA-capable unit, in which case caches have not been used. ++ * .. _`V4L2-BUF-FLAG-M2M-HOLD-CAPTURE-BUF`: ++ ++ - ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` ++ - 0x00000200 ++ - Only valid if ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` is ++ set. It is typically used with stateless decoders where multiple ++ output buffers each decode to a slice of the decoded frame. ++ Applications can set this flag when queueing the output buffer ++ to prevent the driver from dequeueing the capture buffer after ++ the output buffer has been decoded (i.e. the capture buffer is ++ 'held'). If the timestamp of this output buffer differs from that ++ of the previous output buffer, then that indicates the start of a ++ new frame and the previously held capture buffer is dequeued. + * .. _`V4L2-BUF-FLAG-LAST`: + + - ``V4L2_BUF_FLAG_LAST`` +--- a/Documentation/media/uapi/v4l/vidioc-reqbufs.rst ++++ b/Documentation/media/uapi/v4l/vidioc-reqbufs.rst +@@ -125,6 +125,7 @@ aborting or finishing any DMA in progres + .. _V4L2-BUF-CAP-SUPPORTS-DMABUF: + .. _V4L2-BUF-CAP-SUPPORTS-REQUESTS: + .. _V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS: ++.. _V4L2-BUF-CAP-SUPPORTS-M2M-HOLD-CAPTURE-BUF: + + .. cssclass:: longtable + +@@ -150,6 +151,11 @@ aborting or finishing any DMA in progres + - The kernel allows calling :ref:`VIDIOC_REQBUFS` while buffers are still + mapped or exported via DMABUF. These orphaned buffers will be freed + when they are unmapped or when the exported DMABUF fds are closed. ++ * - ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` ++ - 0x00000020 ++ - Only valid for stateless decoders. If set, then userspace can set the ++ ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag to hold off on returning the ++ capture buffer until the OUTPUT timestamp changes. + + Return Value + ============ +--- a/drivers/media/common/videobuf2/videobuf2-v4l2.c ++++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c +@@ -49,8 +49,11 @@ module_param(debug, int, 0644); + V4L2_BUF_FLAG_REQUEST_FD | \ + V4L2_BUF_FLAG_TIMESTAMP_MASK) + /* Output buffer flags that should be passed on to the driver */ +-#define V4L2_BUFFER_OUT_FLAGS (V4L2_BUF_FLAG_PFRAME | V4L2_BUF_FLAG_BFRAME | \ +- V4L2_BUF_FLAG_KEYFRAME | V4L2_BUF_FLAG_TIMECODE) ++#define V4L2_BUFFER_OUT_FLAGS (V4L2_BUF_FLAG_PFRAME | \ ++ V4L2_BUF_FLAG_BFRAME | \ ++ V4L2_BUF_FLAG_KEYFRAME | \ ++ V4L2_BUF_FLAG_TIMECODE | \ ++ V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF) + + /* + * __verify_planes_array() - verify that the planes array passed in struct +@@ -194,6 +197,7 @@ static int vb2_fill_vb2_v4l2_buffer(stru + } + vbuf->sequence = 0; + vbuf->request_fd = -1; ++ vbuf->is_held = false; + + if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) { + switch (b->memory) { +@@ -321,6 +325,8 @@ static int vb2_fill_vb2_v4l2_buffer(stru + */ + vbuf->flags &= ~V4L2_BUF_FLAG_TIMECODE; + vbuf->field = b->field; ++ if (!(q->subsystem_flags & VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF)) ++ vbuf->flags &= ~V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF; + } else { + /* Zero any output buffer flags as this is a capture buffer */ + vbuf->flags &= ~V4L2_BUFFER_OUT_FLAGS; +@@ -654,6 +660,8 @@ static void fill_buf_caps(struct vb2_que + *caps |= V4L2_BUF_CAP_SUPPORTS_USERPTR; + if (q->io_modes & VB2_DMABUF) + *caps |= V4L2_BUF_CAP_SUPPORTS_DMABUF; ++ if (q->subsystem_flags & VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF) ++ *caps |= V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF; + #ifdef CONFIG_MEDIA_CONTROLLER_REQUEST_API + if (q->supports_requests) + *caps |= V4L2_BUF_CAP_SUPPORTS_REQUESTS; +--- a/include/media/videobuf2-core.h ++++ b/include/media/videobuf2-core.h +@@ -505,6 +505,8 @@ struct vb2_buf_ops { + * @buf_ops: callbacks to deliver buffer information. + * between user-space and kernel-space. + * @drv_priv: driver private data. ++ * @subsystem_flags: Flags specific to the subsystem (V4L2/DVB/etc.). Not used ++ * by the vb2 core. + * @buf_struct_size: size of the driver-specific buffer structure; + * "0" indicates the driver doesn't want to use a custom buffer + * structure type. for example, ``sizeof(struct vb2_v4l2_buffer)`` +@@ -571,6 +573,7 @@ struct vb2_queue { + const struct vb2_buf_ops *buf_ops; + + void *drv_priv; ++ u32 subsystem_flags; + unsigned int buf_struct_size; + u32 timestamp_flags; + gfp_t gfp_flags; +--- a/include/media/videobuf2-v4l2.h ++++ b/include/media/videobuf2-v4l2.h +@@ -33,6 +33,7 @@ + * @timecode: frame timecode. + * @sequence: sequence count of this frame. + * @request_fd: the request_fd associated with this buffer ++ * @is_held: if true, then this capture buffer was held + * @planes: plane information (userptr/fd, length, bytesused, data_offset). + * + * Should contain enough information to be able to cover all the fields +@@ -46,9 +47,13 @@ struct vb2_v4l2_buffer { + struct v4l2_timecode timecode; + __u32 sequence; + __s32 request_fd; ++ bool is_held; + struct vb2_plane planes[VB2_MAX_PLANES]; + }; + ++/* VB2 V4L2 flags as set in vb2_queue.subsystem_flags */ ++#define VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF (1 << 0) ++ + /* + * to_vb2_v4l2_buffer() - cast struct vb2_buffer * to struct vb2_v4l2_buffer * + */ +--- a/include/uapi/linux/videodev2.h ++++ b/include/uapi/linux/videodev2.h +@@ -925,11 +925,12 @@ struct v4l2_requestbuffers { + }; + + /* capabilities for struct v4l2_requestbuffers and v4l2_create_buffers */ +-#define V4L2_BUF_CAP_SUPPORTS_MMAP (1 << 0) +-#define V4L2_BUF_CAP_SUPPORTS_USERPTR (1 << 1) +-#define V4L2_BUF_CAP_SUPPORTS_DMABUF (1 << 2) +-#define V4L2_BUF_CAP_SUPPORTS_REQUESTS (1 << 3) +-#define V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS (1 << 4) ++#define V4L2_BUF_CAP_SUPPORTS_MMAP (1 << 0) ++#define V4L2_BUF_CAP_SUPPORTS_USERPTR (1 << 1) ++#define V4L2_BUF_CAP_SUPPORTS_DMABUF (1 << 2) ++#define V4L2_BUF_CAP_SUPPORTS_REQUESTS (1 << 3) ++#define V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS (1 << 4) ++#define V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF (1 << 5) + + /** + * struct v4l2_plane - plane info for multi-planar buffers +@@ -1051,6 +1052,8 @@ static inline __u64 v4l2_timeval_to_ns(c + #define V4L2_BUF_FLAG_IN_REQUEST 0x00000080 + /* timecode field is valid */ + #define V4L2_BUF_FLAG_TIMECODE 0x00000100 ++/* Don't return the capture buffer until OUTPUT timestamp changes */ ++#define V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF 0x00000200 + /* Buffer is prepared for queuing */ + #define V4L2_BUF_FLAG_PREPARED 0x00000400 + /* Cache handling flags */ diff --git a/target/linux/bcm27xx/patches-5.4/950-0498-media-v4l2-mem2mem-support-held-capture-buffers.patch b/target/linux/bcm27xx/patches-5.4/950-0498-media-v4l2-mem2mem-support-held-capture-buffers.patch new file mode 100644 index 0000000000..bb66baf07d --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0498-media-v4l2-mem2mem-support-held-capture-buffers.patch @@ -0,0 +1,260 @@ +From dc9b786e4b9a1262b536b3c9d0fa88e34a2b3f8f Mon Sep 17 00:00:00 2001 +From: Hans Verkuil +Date: Fri, 11 Oct 2019 06:32:41 -0300 +Subject: [PATCH] media: v4l2-mem2mem: support held capture buffers + +Commit f8cca8c97a63d77f48334cde81d15014f43530ef upstream. + +Check for held buffers that are ready to be returned to vb2 in +__v4l2_m2m_try_queue(). This avoids drivers having to handle this +case. + +Add v4l2_m2m_buf_done_and_job_finish() to correctly return source +and destination buffers and mark the job as finished while taking +a held destination buffer into account (i.e. that buffer won't be +returned). This has to be done while job_spinlock is held to avoid +race conditions. + +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + drivers/media/v4l2-core/v4l2-mem2mem.c | 130 ++++++++++++++++++------- + include/media/v4l2-mem2mem.h | 33 ++++++- + 2 files changed, 128 insertions(+), 35 deletions(-) + +--- a/drivers/media/v4l2-core/v4l2-mem2mem.c ++++ b/drivers/media/v4l2-core/v4l2-mem2mem.c +@@ -284,7 +284,8 @@ static void v4l2_m2m_try_run(struct v4l2 + static void __v4l2_m2m_try_queue(struct v4l2_m2m_dev *m2m_dev, + struct v4l2_m2m_ctx *m2m_ctx) + { +- unsigned long flags_job, flags_out, flags_cap; ++ unsigned long flags_job; ++ struct vb2_v4l2_buffer *dst, *src; + + dprintk("Trying to schedule a job for m2m_ctx: %p\n", m2m_ctx); + +@@ -307,20 +308,30 @@ static void __v4l2_m2m_try_queue(struct + goto job_unlock; + } + +- spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags_out); +- if (list_empty(&m2m_ctx->out_q_ctx.rdy_queue) +- && !m2m_ctx->out_q_ctx.buffered) { ++ src = v4l2_m2m_next_src_buf(m2m_ctx); ++ dst = v4l2_m2m_next_dst_buf(m2m_ctx); ++ if (!src && !m2m_ctx->out_q_ctx.buffered) { + dprintk("No input buffers available\n"); +- goto out_unlock; ++ goto job_unlock; + } +- spin_lock_irqsave(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags_cap); +- if (list_empty(&m2m_ctx->cap_q_ctx.rdy_queue) +- && !m2m_ctx->cap_q_ctx.buffered) { ++ if (!dst && !m2m_ctx->cap_q_ctx.buffered) { + dprintk("No output buffers available\n"); +- goto cap_unlock; ++ goto job_unlock; ++ } ++ ++ if (src && dst && ++ dst->is_held && dst->vb2_buf.copied_timestamp && ++ dst->vb2_buf.timestamp != src->vb2_buf.timestamp) { ++ dst->is_held = false; ++ v4l2_m2m_dst_buf_remove(m2m_ctx); ++ v4l2_m2m_buf_done(dst, VB2_BUF_STATE_DONE); ++ dst = v4l2_m2m_next_dst_buf(m2m_ctx); ++ ++ if (!dst && !m2m_ctx->cap_q_ctx.buffered) { ++ dprintk("No output buffers available after returning held buffer\n"); ++ goto job_unlock; ++ } + } +- spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags_cap); +- spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags_out); + + if (m2m_dev->m2m_ops->job_ready + && (!m2m_dev->m2m_ops->job_ready(m2m_ctx->priv))) { +@@ -331,13 +342,6 @@ static void __v4l2_m2m_try_queue(struct + list_add_tail(&m2m_ctx->queue, &m2m_dev->job_queue); + m2m_ctx->job_flags |= TRANS_QUEUED; + +- spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job); +- return; +- +-cap_unlock: +- spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags_cap); +-out_unlock: +- spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags_out); + job_unlock: + spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags_job); + } +@@ -412,37 +416,97 @@ static void v4l2_m2m_cancel_job(struct v + } + } + +-void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev, +- struct v4l2_m2m_ctx *m2m_ctx) ++/* ++ * Schedule the next job, called from v4l2_m2m_job_finish() or ++ * v4l2_m2m_buf_done_and_job_finish(). ++ */ ++static void v4l2_m2m_schedule_next_job(struct v4l2_m2m_dev *m2m_dev, ++ struct v4l2_m2m_ctx *m2m_ctx) + { +- unsigned long flags; ++ /* ++ * This instance might have more buffers ready, but since we do not ++ * allow more than one job on the job_queue per instance, each has ++ * to be scheduled separately after the previous one finishes. ++ */ ++ __v4l2_m2m_try_queue(m2m_dev, m2m_ctx); + +- spin_lock_irqsave(&m2m_dev->job_spinlock, flags); ++ /* ++ * We might be running in atomic context, ++ * but the job must be run in non-atomic context. ++ */ ++ schedule_work(&m2m_dev->job_work); ++} ++ ++/* ++ * Assumes job_spinlock is held, called from v4l2_m2m_job_finish() or ++ * v4l2_m2m_buf_done_and_job_finish(). ++ */ ++static bool _v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev, ++ struct v4l2_m2m_ctx *m2m_ctx) ++{ + if (!m2m_dev->curr_ctx || m2m_dev->curr_ctx != m2m_ctx) { +- spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); + dprintk("Called by an instance not currently running\n"); +- return; ++ return false; + } + + list_del(&m2m_dev->curr_ctx->queue); + m2m_dev->curr_ctx->job_flags &= ~(TRANS_QUEUED | TRANS_RUNNING); + wake_up(&m2m_dev->curr_ctx->finished); + m2m_dev->curr_ctx = NULL; ++ return true; ++} + +- spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); +- +- /* This instance might have more buffers ready, but since we do not +- * allow more than one job on the job_queue per instance, each has +- * to be scheduled separately after the previous one finishes. */ +- __v4l2_m2m_try_queue(m2m_dev, m2m_ctx); ++void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev, ++ struct v4l2_m2m_ctx *m2m_ctx) ++{ ++ unsigned long flags; ++ bool schedule_next; + +- /* We might be running in atomic context, +- * but the job must be run in non-atomic context. ++ /* ++ * This function should not be used for drivers that support ++ * holding capture buffers. Those should use ++ * v4l2_m2m_buf_done_and_job_finish() instead. + */ +- schedule_work(&m2m_dev->job_work); ++ WARN_ON(m2m_ctx->cap_q_ctx.q.subsystem_flags & ++ VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF); ++ spin_lock_irqsave(&m2m_dev->job_spinlock, flags); ++ schedule_next = _v4l2_m2m_job_finish(m2m_dev, m2m_ctx); ++ spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); ++ ++ if (schedule_next) ++ v4l2_m2m_schedule_next_job(m2m_dev, m2m_ctx); + } + EXPORT_SYMBOL(v4l2_m2m_job_finish); + ++void v4l2_m2m_buf_done_and_job_finish(struct v4l2_m2m_dev *m2m_dev, ++ struct v4l2_m2m_ctx *m2m_ctx, ++ enum vb2_buffer_state state) ++{ ++ struct vb2_v4l2_buffer *src_buf, *dst_buf; ++ bool schedule_next = false; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&m2m_dev->job_spinlock, flags); ++ src_buf = v4l2_m2m_src_buf_remove(m2m_ctx); ++ dst_buf = v4l2_m2m_next_dst_buf(m2m_ctx); ++ ++ if (WARN_ON(!src_buf || !dst_buf)) ++ goto unlock; ++ v4l2_m2m_buf_done(src_buf, state); ++ dst_buf->is_held = src_buf->flags & V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF; ++ if (!dst_buf->is_held) { ++ v4l2_m2m_dst_buf_remove(m2m_ctx); ++ v4l2_m2m_buf_done(dst_buf, state); ++ } ++ schedule_next = _v4l2_m2m_job_finish(m2m_dev, m2m_ctx); ++unlock: ++ spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); ++ ++ if (schedule_next) ++ v4l2_m2m_schedule_next_job(m2m_dev, m2m_ctx); ++} ++EXPORT_SYMBOL(v4l2_m2m_buf_done_and_job_finish); ++ + int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_requestbuffers *reqbufs) + { +--- a/include/media/v4l2-mem2mem.h ++++ b/include/media/v4l2-mem2mem.h +@@ -21,7 +21,8 @@ + * callback. + * The job does NOT have to end before this callback returns + * (and it will be the usual case). When the job finishes, +- * v4l2_m2m_job_finish() has to be called. ++ * v4l2_m2m_job_finish() or v4l2_m2m_buf_done_and_job_finish() ++ * has to be called. + * @job_ready: optional. Should return 0 if the driver does not have a job + * fully prepared to run yet (i.e. it will not be able to finish a + * transaction without sleeping). If not provided, it will be +@@ -33,7 +34,8 @@ + * stop the device safely; e.g. in the next interrupt handler), + * even if the transaction would not have been finished by then. + * After the driver performs the necessary steps, it has to call +- * v4l2_m2m_job_finish() (as if the transaction ended normally). ++ * v4l2_m2m_job_finish() or v4l2_m2m_buf_done_and_job_finish() as ++ * if the transaction ended normally. + * This function does not have to (and will usually not) wait + * until the device enters a state when it can be stopped. + */ +@@ -173,6 +175,33 @@ void v4l2_m2m_try_schedule(struct v4l2_m + void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev, + struct v4l2_m2m_ctx *m2m_ctx); + ++/** ++ * v4l2_m2m_buf_done_and_job_finish() - return source/destination buffers with ++ * state and inform the framework that a job has been finished and have it ++ * clean up ++ * ++ * @m2m_dev: opaque pointer to the internal data to handle M2M context ++ * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx ++ * @state: vb2 buffer state passed to v4l2_m2m_buf_done(). ++ * ++ * Drivers that set V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF must use this ++ * function instead of job_finish() to take held buffers into account. It is ++ * optional for other drivers. ++ * ++ * This function removes the source buffer from the ready list and returns ++ * it with the given state. The same is done for the destination buffer, unless ++ * it is marked 'held'. In that case the buffer is kept on the ready list. ++ * ++ * After that the job is finished (see job_finish()). ++ * ++ * This allows for multiple output buffers to be used to fill in a single ++ * capture buffer. This is typically used by stateless decoders where ++ * multiple e.g. H.264 slices contribute to a single decoded frame. ++ */ ++void v4l2_m2m_buf_done_and_job_finish(struct v4l2_m2m_dev *m2m_dev, ++ struct v4l2_m2m_ctx *m2m_ctx, ++ enum vb2_buffer_state state); ++ + static inline void + v4l2_m2m_buf_done(struct vb2_v4l2_buffer *buf, enum vb2_buffer_state state) + { diff --git a/target/linux/bcm27xx/patches-5.4/950-0499-media-videodev2.h-add-V4L2_DEC_CMD_FLUSH.patch b/target/linux/bcm27xx/patches-5.4/950-0499-media-videodev2.h-add-V4L2_DEC_CMD_FLUSH.patch new file mode 100644 index 0000000000..ef075fdb22 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0499-media-videodev2.h-add-V4L2_DEC_CMD_FLUSH.patch @@ -0,0 +1,57 @@ +From b2ea711d2c21ec021de4ff09a0a2b5b4224f9749 Mon Sep 17 00:00:00 2001 +From: Hans Verkuil +Date: Fri, 11 Oct 2019 06:32:42 -0300 +Subject: [PATCH] media: videodev2.h: add V4L2_DEC_CMD_FLUSH + +Add this new V4L2_DEC_CMD_FLUSH decoder command and document it. + +Reviewed-by: Boris Brezillon +Reviewed-by: Alexandre Courbot +Signed-off-by: Hans Verkuil +Signed-off-by: Jernej Skrabec +Signed-off-by: Mauro Carvalho Chehab +--- + Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst | 10 +++++++++- + Documentation/media/videodev2.h.rst.exceptions | 1 + + include/uapi/linux/videodev2.h | 1 + + 3 files changed, 11 insertions(+), 1 deletion(-) + +--- a/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst ++++ b/Documentation/media/uapi/v4l/vidioc-decoder-cmd.rst +@@ -208,7 +208,15 @@ introduced in Linux 3.3. They are, howev + been started yet, the driver will return an ``EPERM`` error code. When + the decoder is already running, this command does nothing. No + flags are defined for this command. +- ++ * - ``V4L2_DEC_CMD_FLUSH`` ++ - 4 ++ - Flush any held capture buffers. Only valid for stateless decoders. ++ This command is typically used when the application reached the ++ end of the stream and the last output buffer had the ++ ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF`` flag set. This would prevent ++ dequeueing the capture buffer containing the last decoded frame. ++ So this command can be used to explicitly flush that final decoded ++ frame. This command does nothing if there are no held capture buffers. + + Return Value + ============ +--- a/Documentation/media/videodev2.h.rst.exceptions ++++ b/Documentation/media/videodev2.h.rst.exceptions +@@ -434,6 +434,7 @@ replace define V4L2_DEC_CMD_START decode + replace define V4L2_DEC_CMD_STOP decoder-cmds + replace define V4L2_DEC_CMD_PAUSE decoder-cmds + replace define V4L2_DEC_CMD_RESUME decoder-cmds ++replace define V4L2_DEC_CMD_FLUSH decoder-cmds + + replace define V4L2_DEC_CMD_START_MUTE_AUDIO decoder-cmds + replace define V4L2_DEC_CMD_PAUSE_TO_BLACK decoder-cmds +--- a/include/uapi/linux/videodev2.h ++++ b/include/uapi/linux/videodev2.h +@@ -1989,6 +1989,7 @@ struct v4l2_encoder_cmd { + #define V4L2_DEC_CMD_STOP (1) + #define V4L2_DEC_CMD_PAUSE (2) + #define V4L2_DEC_CMD_RESUME (3) ++#define V4L2_DEC_CMD_FLUSH (4) + + /* Flags for V4L2_DEC_CMD_START */ + #define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0) diff --git a/target/linux/bcm27xx/patches-5.4/950-0500-media-v4l2-mem2mem-add-stateless_-try_-decoder_cmd-i.patch b/target/linux/bcm27xx/patches-5.4/950-0500-media-v4l2-mem2mem-add-stateless_-try_-decoder_cmd-i.patch new file mode 100644 index 0000000000..0b74dbf123 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0500-media-v4l2-mem2mem-add-stateless_-try_-decoder_cmd-i.patch @@ -0,0 +1,96 @@ +From 1decb017f990ea61ab421e316bf1af3a5199b73a Mon Sep 17 00:00:00 2001 +From: Jernej Skrabec +Date: Fri, 11 Oct 2019 06:32:43 -0300 +Subject: [PATCH] media: v4l2-mem2mem: add stateless_(try_)decoder_cmd + ioctl helpers + +Commit bef41d93aac64b54c3008ca6170bec54f85784f5 upstream. + +These helpers are used by stateless codecs when they support multiple +slices per frame and hold capture buffer flag is set. It's expected that +all such codecs will use this code. + +Signed-off-by: Jernej Skrabec +Co-developed-by: Hans Verkuil +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + drivers/media/v4l2-core/v4l2-mem2mem.c | 53 ++++++++++++++++++++++++++ + include/media/v4l2-mem2mem.h | 4 ++ + 2 files changed, 57 insertions(+) + +--- a/drivers/media/v4l2-core/v4l2-mem2mem.c ++++ b/drivers/media/v4l2-core/v4l2-mem2mem.c +@@ -1218,6 +1218,59 @@ int v4l2_m2m_ioctl_try_decoder_cmd(struc + } + EXPORT_SYMBOL_GPL(v4l2_m2m_ioctl_try_decoder_cmd); + ++int v4l2_m2m_ioctl_stateless_try_decoder_cmd(struct file *file, void *fh, ++ struct v4l2_decoder_cmd *dc) ++{ ++ if (dc->cmd != V4L2_DEC_CMD_FLUSH) ++ return -EINVAL; ++ ++ dc->flags = 0; ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(v4l2_m2m_ioctl_stateless_try_decoder_cmd); ++ ++int v4l2_m2m_ioctl_stateless_decoder_cmd(struct file *file, void *priv, ++ struct v4l2_decoder_cmd *dc) ++{ ++ struct v4l2_fh *fh = file->private_data; ++ struct vb2_v4l2_buffer *out_vb, *cap_vb; ++ struct v4l2_m2m_dev *m2m_dev = fh->m2m_ctx->m2m_dev; ++ unsigned long flags; ++ int ret; ++ ++ ret = v4l2_m2m_ioctl_stateless_try_decoder_cmd(file, priv, dc); ++ if (ret < 0) ++ return ret; ++ ++ spin_lock_irqsave(&m2m_dev->job_spinlock, flags); ++ out_vb = v4l2_m2m_last_src_buf(fh->m2m_ctx); ++ cap_vb = v4l2_m2m_last_dst_buf(fh->m2m_ctx); ++ ++ /* ++ * If there is an out buffer pending, then clear any HOLD flag. ++ * ++ * By clearing this flag we ensure that when this output ++ * buffer is processed any held capture buffer will be released. ++ */ ++ if (out_vb) { ++ out_vb->flags &= ~V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF; ++ } else if (cap_vb && cap_vb->is_held) { ++ /* ++ * If there were no output buffers, but there is a ++ * capture buffer that is held, then release that ++ * buffer. ++ */ ++ cap_vb->is_held = false; ++ v4l2_m2m_dst_buf_remove(fh->m2m_ctx); ++ v4l2_m2m_buf_done(cap_vb, VB2_BUF_STATE_DONE); ++ } ++ spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(v4l2_m2m_ioctl_stateless_decoder_cmd); ++ + /* + * v4l2_file_operations helpers. It is assumed here same lock is used + * for the output and the capture buffer queue. +--- a/include/media/v4l2-mem2mem.h ++++ b/include/media/v4l2-mem2mem.h +@@ -701,6 +701,10 @@ int v4l2_m2m_ioctl_try_encoder_cmd(struc + struct v4l2_encoder_cmd *ec); + int v4l2_m2m_ioctl_try_decoder_cmd(struct file *file, void *fh, + struct v4l2_decoder_cmd *dc); ++int v4l2_m2m_ioctl_stateless_try_decoder_cmd(struct file *file, void *fh, ++ struct v4l2_decoder_cmd *dc); ++int v4l2_m2m_ioctl_stateless_decoder_cmd(struct file *file, void *priv, ++ struct v4l2_decoder_cmd *dc); + int v4l2_m2m_fop_mmap(struct file *file, struct vm_area_struct *vma); + __poll_t v4l2_m2m_fop_poll(struct file *file, poll_table *wait); + diff --git a/target/linux/bcm27xx/patches-5.4/950-0501-media-v4l2-mem2mem-add-new_frame-detection.patch b/target/linux/bcm27xx/patches-5.4/950-0501-media-v4l2-mem2mem-add-new_frame-detection.patch new file mode 100644 index 0000000000..3c777922f1 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0501-media-v4l2-mem2mem-add-new_frame-detection.patch @@ -0,0 +1,69 @@ +From 1d55acac432983ad8301f5430c42ac549b4b4c6f Mon Sep 17 00:00:00 2001 +From: Hans Verkuil +Date: Fri, 11 Oct 2019 06:32:44 -0300 +Subject: [PATCH] media: v4l2-mem2mem: add new_frame detection + +Commit f07602ac388723233e9e3c5a05b54baf34e0a3e9 upstream. + +Drivers that support VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF +typically want to know if a new frame is started (i.e. the first +slice is about to be processed). Add a new_frame bool to v4l2_m2m_ctx +and set it accordingly. + +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + drivers/media/v4l2-core/v4l2-mem2mem.c | 11 +++++++++-- + include/media/v4l2-mem2mem.h | 7 +++++++ + 2 files changed, 16 insertions(+), 2 deletions(-) + +--- a/drivers/media/v4l2-core/v4l2-mem2mem.c ++++ b/drivers/media/v4l2-core/v4l2-mem2mem.c +@@ -319,8 +319,10 @@ static void __v4l2_m2m_try_queue(struct + goto job_unlock; + } + +- if (src && dst && +- dst->is_held && dst->vb2_buf.copied_timestamp && ++ m2m_ctx->new_frame = true; ++ ++ if (src && dst && dst->is_held && ++ dst->vb2_buf.copied_timestamp && + dst->vb2_buf.timestamp != src->vb2_buf.timestamp) { + dst->is_held = false; + v4l2_m2m_dst_buf_remove(m2m_ctx); +@@ -333,6 +335,11 @@ static void __v4l2_m2m_try_queue(struct + } + } + ++ if (src && dst && (m2m_ctx->cap_q_ctx.q.subsystem_flags & ++ VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF)) ++ m2m_ctx->new_frame = !dst->vb2_buf.copied_timestamp || ++ dst->vb2_buf.timestamp != src->vb2_buf.timestamp; ++ + if (m2m_dev->m2m_ops->job_ready + && (!m2m_dev->m2m_ops->job_ready(m2m_ctx->priv))) { + dprintk("Driver not ready\n"); +--- a/include/media/v4l2-mem2mem.h ++++ b/include/media/v4l2-mem2mem.h +@@ -75,6 +75,11 @@ struct v4l2_m2m_queue_ctx { + * struct v4l2_m2m_ctx - Memory to memory context structure + * + * @q_lock: struct &mutex lock ++ * @new_frame: valid in the device_run callback: if true, then this ++ * starts a new frame; if false, then this is a new slice ++ * for an existing frame. This is always true unless ++ * V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF is set, which ++ * indicates slicing support. + * @m2m_dev: opaque pointer to the internal data to handle M2M context + * @cap_q_ctx: Capture (output to memory) queue context + * @out_q_ctx: Output (input from memory) queue context +@@ -91,6 +96,8 @@ struct v4l2_m2m_ctx { + /* optional cap/out vb2 queues lock */ + struct mutex *q_lock; + ++ bool new_frame; ++ + /* internal use only */ + struct v4l2_m2m_dev *m2m_dev; + diff --git a/target/linux/bcm27xx/patches-5.4/950-0502-media-Documentation-media-Document-V4L2_CTRL_TYPE_AR.patch b/target/linux/bcm27xx/patches-5.4/950-0502-media-Documentation-media-Document-V4L2_CTRL_TYPE_AR.patch new file mode 100644 index 0000000000..1d478fc68a --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0502-media-Documentation-media-Document-V4L2_CTRL_TYPE_AR.patch @@ -0,0 +1,46 @@ +From 20076d276d045c03f809bb16f0e1fafcfe63a81f Mon Sep 17 00:00:00 2001 +From: Ricardo Ribalda Delgado +Date: Mon, 7 Oct 2019 12:06:32 -0300 +Subject: [PATCH] media: Documentation: media: Document + V4L2_CTRL_TYPE_AREA + +Commit 8ae3a0862993c09a8ef0f9abb379553370c517e3 upstream. + +A struct v4l2_area containing the width and the height of a rectangular +area. + +Reviewed-by: Jacopo Mondi +Reviewed-by: Philipp Zabel +Signed-off-by: Ricardo Ribalda Delgado +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + Documentation/media/uapi/v4l/vidioc-queryctrl.rst | 6 ++++++ + Documentation/media/videodev2.h.rst.exceptions | 1 + + 2 files changed, 7 insertions(+) + +--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst ++++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst +@@ -443,6 +443,12 @@ See also the examples in :ref:`control`. + - n/a + - A struct :c:type:`v4l2_ctrl_mpeg2_quantization`, containing MPEG-2 + quantization matrices for stateless video decoders. ++ * - ``V4L2_CTRL_TYPE_AREA`` ++ - n/a ++ - n/a ++ - n/a ++ - A struct :c:type:`v4l2_area`, containing the width and the height ++ of a rectangular area. Units depend on the use case. + * - ``V4L2_CTRL_TYPE_H264_SPS`` + - n/a + - n/a +--- a/Documentation/media/videodev2.h.rst.exceptions ++++ b/Documentation/media/videodev2.h.rst.exceptions +@@ -141,6 +141,7 @@ replace symbol V4L2_CTRL_TYPE_H264_PPS : + replace symbol V4L2_CTRL_TYPE_H264_SCALING_MATRIX :c:type:`v4l2_ctrl_type` + replace symbol V4L2_CTRL_TYPE_H264_SLICE_PARAMS :c:type:`v4l2_ctrl_type` + replace symbol V4L2_CTRL_TYPE_H264_DECODE_PARAMS :c:type:`v4l2_ctrl_type` ++replace symbol V4L2_CTRL_TYPE_AREA :c:type:`v4l2_ctrl_type` + + # V4L2 capability defines + replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities diff --git a/target/linux/bcm27xx/patches-5.4/950-0503-media-v4l-Add-definitions-for-HEVC-stateless-decodin.patch b/target/linux/bcm27xx/patches-5.4/950-0503-media-v4l-Add-definitions-for-HEVC-stateless-decodin.patch new file mode 100644 index 0000000000..0fe0f8cea4 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0503-media-v4l-Add-definitions-for-HEVC-stateless-decodin.patch @@ -0,0 +1,1093 @@ +From 5f6c08984a6578201fe3a2394ccb0d3a30fdf027 Mon Sep 17 00:00:00 2001 +From: Paul Kocialkowski +Date: Tue, 22 Oct 2019 12:26:52 -0300 +Subject: [PATCH] media: v4l: Add definitions for HEVC stateless + decoding + +This introduces the required definitions for HEVC decoding support with +stateless VPUs. The controls associated to the HEVC slice format provide +the required meta-data for decoding slices extracted from the bitstream. + +They are not exported to the public V4L2 API since reworking this API +will likely be needed for covering various use-cases and new hardware. + +Multi-slice decoding is exposed as a valid decoding mode to match current +H.264 support but it is not yet implemented. + +The interface comes with the following limitations: +* No custom quantization matrices (scaling lists); +* Support for a single temporal layer only; +* No slice entry point offsets support; +* No conformance window support; +* No VUI parameters support; +* No support for SPS extensions: range, multilayer, 3d, scc, 4 bits; +* No support for PPS extensions: range, multilayer, 3d, scc, 4 bits. + +Signed-off-by: Paul Kocialkowski +[hverkuil-cisco@xs4all.nl: use 1ULL in flags defines in hevc-ctrls.h] +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + Documentation/media/uapi/v4l/biblio.rst | 9 + + .../media/uapi/v4l/ext-ctrls-codec.rst | 553 +++++++++++++++++- + .../media/uapi/v4l/vidioc-queryctrl.rst | 18 + + .../media/videodev2.h.rst.exceptions | 3 + + drivers/media/v4l2-core/v4l2-ctrls.c | 109 +++- + drivers/media/v4l2-core/v4l2-ioctl.c | 1 + + include/media/hevc-ctrls.h | 212 +++++++ + include/media/v4l2-ctrls.h | 7 + + 8 files changed, 908 insertions(+), 4 deletions(-) + create mode 100644 include/media/hevc-ctrls.h + +--- a/Documentation/media/uapi/v4l/biblio.rst ++++ b/Documentation/media/uapi/v4l/biblio.rst +@@ -131,6 +131,15 @@ ITU-T Rec. H.264 Specification (04/2017 + + :author: International Telecommunication Union (http://www.itu.ch) + ++.. _hevc: ++ ++ITU H.265/HEVC ++============== ++ ++:title: ITU-T Rec. H.265 | ISO/IEC 23008-2 "High Efficiency Video Coding" ++ ++:author: International Telecommunication Union (http://www.itu.ch), International Organisation for Standardisation (http://www.iso.ch) ++ + .. _jfif: + + JFIF +--- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst ++++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst +@@ -1983,9 +1983,9 @@ enum v4l2_mpeg_video_h264_hierarchical_c + - ``reference_ts`` + - Timestamp of the V4L2 capture buffer to use as reference, used + with B-coded and P-coded frames. The timestamp refers to the +- ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the +- :c:func:`v4l2_timeval_to_ns()` function to convert the struct +- :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. ++ ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the ++ :c:func:`v4l2_timeval_to_ns()` function to convert the struct ++ :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. + * - __u16 + - ``frame_num`` + - +@@ -3693,3 +3693,550 @@ enum v4l2_mpeg_video_hevc_size_of_length + Indicates whether to generate SPS and PPS at every IDR. Setting it to 0 + disables generating SPS and PPS at every IDR. Setting it to one enables + generating SPS and PPS at every IDR. ++ ++.. _v4l2-mpeg-hevc: ++ ++``V4L2_CID_MPEG_VIDEO_HEVC_SPS (struct)`` ++ Specifies the Sequence Parameter Set fields (as extracted from the ++ bitstream) for the associated HEVC slice data. ++ These bitstream parameters are defined according to :ref:`hevc`. ++ They are described in section 7.4.3.2 "Sequence parameter set RBSP ++ semantics" of the specification. ++ ++.. c:type:: v4l2_ctrl_hevc_sps ++ ++.. cssclass:: longtable ++ ++.. flat-table:: struct v4l2_ctrl_hevc_sps ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - __u16 ++ - ``pic_width_in_luma_samples`` ++ - ++ * - __u16 ++ - ``pic_height_in_luma_samples`` ++ - ++ * - __u8 ++ - ``bit_depth_luma_minus8`` ++ - ++ * - __u8 ++ - ``bit_depth_chroma_minus8`` ++ - ++ * - __u8 ++ - ``log2_max_pic_order_cnt_lsb_minus4`` ++ - ++ * - __u8 ++ - ``sps_max_dec_pic_buffering_minus1`` ++ - ++ * - __u8 ++ - ``sps_max_num_reorder_pics`` ++ - ++ * - __u8 ++ - ``sps_max_latency_increase_plus1`` ++ - ++ * - __u8 ++ - ``log2_min_luma_coding_block_size_minus3`` ++ - ++ * - __u8 ++ - ``log2_diff_max_min_luma_coding_block_size`` ++ - ++ * - __u8 ++ - ``log2_min_luma_transform_block_size_minus2`` ++ - ++ * - __u8 ++ - ``log2_diff_max_min_luma_transform_block_size`` ++ - ++ * - __u8 ++ - ``max_transform_hierarchy_depth_inter`` ++ - ++ * - __u8 ++ - ``max_transform_hierarchy_depth_intra`` ++ - ++ * - __u8 ++ - ``pcm_sample_bit_depth_luma_minus1`` ++ - ++ * - __u8 ++ - ``pcm_sample_bit_depth_chroma_minus1`` ++ - ++ * - __u8 ++ - ``log2_min_pcm_luma_coding_block_size_minus3`` ++ - ++ * - __u8 ++ - ``log2_diff_max_min_pcm_luma_coding_block_size`` ++ - ++ * - __u8 ++ - ``num_short_term_ref_pic_sets`` ++ - ++ * - __u8 ++ - ``num_long_term_ref_pics_sps`` ++ - ++ * - __u8 ++ - ``chroma_format_idc`` ++ - ++ * - __u64 ++ - ``flags`` ++ - See :ref:`Sequence Parameter Set Flags ` ++ ++.. _hevc_sps_flags: ++ ++``Sequence Parameter Set Flags`` ++ ++.. cssclass:: longtable ++ ++.. flat-table:: ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE`` ++ - 0x00000001 ++ - ++ * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED`` ++ - 0x00000002 ++ - ++ * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED`` ++ - 0x00000004 ++ - ++ * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET`` ++ - 0x00000008 ++ - ++ * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED`` ++ - 0x00000010 ++ - ++ * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED`` ++ - 0x00000020 ++ - ++ * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT`` ++ - 0x00000040 ++ - ++ * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED`` ++ - 0x00000080 ++ - ++ * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED`` ++ - 0x00000100 ++ - ++ ++``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)`` ++ Specifies the Picture Parameter Set fields (as extracted from the ++ bitstream) for the associated HEVC slice data. ++ These bitstream parameters are defined according to :ref:`hevc`. ++ They are described in section 7.4.3.3 "Picture parameter set RBSP ++ semantics" of the specification. ++ ++.. c:type:: v4l2_ctrl_hevc_pps ++ ++.. cssclass:: longtable ++ ++.. flat-table:: struct v4l2_ctrl_hevc_pps ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - __u8 ++ - ``num_extra_slice_header_bits`` ++ - ++ * - __s8 ++ - ``init_qp_minus26`` ++ - ++ * - __u8 ++ - ``diff_cu_qp_delta_depth`` ++ - ++ * - __s8 ++ - ``pps_cb_qp_offset`` ++ - ++ * - __s8 ++ - ``pps_cr_qp_offset`` ++ - ++ * - __u8 ++ - ``num_tile_columns_minus1`` ++ - ++ * - __u8 ++ - ``num_tile_rows_minus1`` ++ - ++ * - __u8 ++ - ``column_width_minus1[20]`` ++ - ++ * - __u8 ++ - ``row_height_minus1[22]`` ++ - ++ * - __s8 ++ - ``pps_beta_offset_div2`` ++ - ++ * - __s8 ++ - ``pps_tc_offset_div2`` ++ - ++ * - __u8 ++ - ``log2_parallel_merge_level_minus2`` ++ - ++ * - __u8 ++ - ``padding[4]`` ++ - Applications and drivers must set this to zero. ++ * - __u64 ++ - ``flags`` ++ - See :ref:`Picture Parameter Set Flags ` ++ ++.. _hevc_pps_flags: ++ ++``Picture Parameter Set Flags`` ++ ++.. cssclass:: longtable ++ ++.. flat-table:: ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT`` ++ - 0x00000001 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT`` ++ - 0x00000002 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED`` ++ - 0x00000004 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT`` ++ - 0x00000008 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED`` ++ - 0x00000010 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED`` ++ - 0x00000020 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED`` ++ - 0x00000040 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT`` ++ - 0x00000080 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED`` ++ - 0x00000100 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED`` ++ - 0x00000200 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED`` ++ - 0x00000400 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED`` ++ - 0x00000800 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED`` ++ - 0x00001000 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED`` ++ - 0x00002000 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED`` ++ - 0x00004000 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED`` ++ - 0x00008000 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER`` ++ - 0x00010000 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT`` ++ - 0x00020000 ++ - ++ * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT`` ++ - 0x00040000 ++ - ++ ++``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)`` ++ Specifies various slice-specific parameters, especially from the NAL unit ++ header, general slice segment header and weighted prediction parameter ++ parts of the bitstream. ++ These bitstream parameters are defined according to :ref:`hevc`. ++ They are described in section 7.4.7 "General slice segment header ++ semantics" of the specification. ++ ++.. c:type:: v4l2_ctrl_hevc_slice_params ++ ++.. cssclass:: longtable ++ ++.. flat-table:: struct v4l2_ctrl_hevc_slice_params ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - __u32 ++ - ``bit_size`` ++ - Size (in bits) of the current slice data. ++ * - __u32 ++ - ``data_bit_offset`` ++ - Offset (in bits) to the video data in the current slice data. ++ * - __u8 ++ - ``nal_unit_type`` ++ - ++ * - __u8 ++ - ``nuh_temporal_id_plus1`` ++ - ++ * - __u8 ++ - ``slice_type`` ++ - ++ (V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or ++ V4L2_HEVC_SLICE_TYPE_B). ++ * - __u8 ++ - ``colour_plane_id`` ++ - ++ * - __u16 ++ - ``slice_pic_order_cnt`` ++ - ++ * - __u8 ++ - ``num_ref_idx_l0_active_minus1`` ++ - ++ * - __u8 ++ - ``num_ref_idx_l1_active_minus1`` ++ - ++ * - __u8 ++ - ``collocated_ref_idx`` ++ - ++ * - __u8 ++ - ``five_minus_max_num_merge_cand`` ++ - ++ * - __s8 ++ - ``slice_qp_delta`` ++ - ++ * - __s8 ++ - ``slice_cb_qp_offset`` ++ - ++ * - __s8 ++ - ``slice_cr_qp_offset`` ++ - ++ * - __s8 ++ - ``slice_act_y_qp_offset`` ++ - ++ * - __s8 ++ - ``slice_act_cb_qp_offset`` ++ - ++ * - __s8 ++ - ``slice_act_cr_qp_offset`` ++ - ++ * - __s8 ++ - ``slice_beta_offset_div2`` ++ - ++ * - __s8 ++ - ``slice_tc_offset_div2`` ++ - ++ * - __u8 ++ - ``pic_struct`` ++ - ++ * - __u8 ++ - ``num_active_dpb_entries`` ++ - The number of entries in ``dpb``. ++ * - __u8 ++ - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` ++ - The list of L0 reference elements as indices in the DPB. ++ * - __u8 ++ - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` ++ - The list of L1 reference elements as indices in the DPB. ++ * - __u8 ++ - ``num_rps_poc_st_curr_before`` ++ - The number of reference pictures in the short-term set that come before ++ the current frame. ++ * - __u8 ++ - ``num_rps_poc_st_curr_after`` ++ - The number of reference pictures in the short-term set that come after ++ the current frame. ++ * - __u8 ++ - ``num_rps_poc_lt_curr`` ++ - The number of reference pictures in the long-term set. ++ * - __u8 ++ - ``padding[7]`` ++ - Applications and drivers must set this to zero. ++ * - struct :c:type:`v4l2_hevc_dpb_entry` ++ - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` ++ - The decoded picture buffer, for meta-data about reference frames. ++ * - struct :c:type:`v4l2_hevc_pred_weight_table` ++ - ``pred_weight_table`` ++ - The prediction weight coefficients for inter-picture prediction. ++ * - __u64 ++ - ``flags`` ++ - See :ref:`Slice Parameters Flags ` ++ ++.. _hevc_slice_params_flags: ++ ++``Slice Parameters Flags`` ++ ++.. cssclass:: longtable ++ ++.. flat-table:: ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA`` ++ - 0x00000001 ++ - ++ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA`` ++ - 0x00000002 ++ - ++ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED`` ++ - 0x00000004 ++ - ++ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO`` ++ - 0x00000008 ++ - ++ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT`` ++ - 0x00000010 ++ - ++ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0`` ++ - 0x00000020 ++ - ++ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV`` ++ - 0x00000040 ++ - ++ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED`` ++ - 0x00000080 ++ - ++ * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED`` ++ - 0x00000100 ++ - ++ ++.. c:type:: v4l2_hevc_dpb_entry ++ ++.. cssclass:: longtable ++ ++.. flat-table:: struct v4l2_hevc_dpb_entry ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - __u64 ++ - ``timestamp`` ++ - Timestamp of the V4L2 capture buffer to use as reference, used ++ with B-coded and P-coded frames. The timestamp refers to the ++ ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the ++ :c:func:`v4l2_timeval_to_ns()` function to convert the struct ++ :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. ++ * - __u8 ++ - ``rps`` ++ - The reference set for the reference frame ++ (V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_BEFORE, ++ V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_AFTER or ++ V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR) ++ * - __u8 ++ - ``field_pic`` ++ - Whether the reference is a field picture or a frame. ++ * - __u16 ++ - ``pic_order_cnt[2]`` ++ - The picture order count of the reference. Only the first element of the ++ array is used for frame pictures, while the first element identifies the ++ top field and the second the bottom field in field-coded pictures. ++ * - __u8 ++ - ``padding[2]`` ++ - Applications and drivers must set this to zero. ++ ++.. c:type:: v4l2_hevc_pred_weight_table ++ ++.. cssclass:: longtable ++ ++.. flat-table:: struct v4l2_hevc_pred_weight_table ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - __u8 ++ - ``luma_log2_weight_denom`` ++ - ++ * - __s8 ++ - ``delta_chroma_log2_weight_denom`` ++ - ++ * - __s8 ++ - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` ++ - ++ * - __s8 ++ - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` ++ - ++ * - __s8 ++ - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` ++ - ++ * - __s8 ++ - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` ++ - ++ * - __s8 ++ - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` ++ - ++ * - __s8 ++ - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` ++ - ++ * - __s8 ++ - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` ++ - ++ * - __s8 ++ - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` ++ - ++ * - __u8 ++ - ``padding[6]`` ++ - Applications and drivers must set this to zero. ++ ++``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)`` ++ Specifies the decoding mode to use. Currently exposes slice-based and ++ frame-based decoding but new modes might be added later on. ++ This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE ++ pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE ++ are required to set this control in order to specify the decoding mode ++ that is expected for the buffer. ++ Drivers may expose a single or multiple decoding modes, depending ++ on what they can support. ++ ++ .. note:: ++ ++ This menu control is not yet part of the public kernel API and ++ it is expected to change. ++ ++.. c:type:: v4l2_mpeg_video_hevc_decode_mode ++ ++.. cssclass:: longtable ++ ++.. flat-table:: ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED`` ++ - 0 ++ - Decoding is done at the slice granularity. ++ The OUTPUT buffer must contain a single slice. ++ * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED`` ++ - 1 ++ - Decoding is done at the frame granularity. ++ The OUTPUT buffer must contain all slices needed to decode the ++ frame. The OUTPUT buffer must also contain both fields. ++ ++``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)`` ++ Specifies the HEVC slice start code expected for each slice. ++ This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE ++ pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE ++ are required to set this control in order to specify the start code ++ that is expected for the buffer. ++ Drivers may expose a single or multiple start codes, depending ++ on what they can support. ++ ++ .. note:: ++ ++ This menu control is not yet part of the public kernel API and ++ it is expected to change. ++ ++.. c:type:: v4l2_mpeg_video_hevc_start_code ++ ++.. cssclass:: longtable ++ ++.. flat-table:: ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE`` ++ - 0 ++ - Selecting this value specifies that HEVC slices are passed ++ to the driver without any start code. ++ * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B`` ++ - 1 ++ - Selecting this value specifies that HEVC slices are expected ++ to be prefixed by Annex B start codes. According to :ref:`hevc` ++ valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. +--- a/Documentation/media/uapi/v4l/vidioc-queryctrl.rst ++++ b/Documentation/media/uapi/v4l/vidioc-queryctrl.rst +@@ -479,6 +479,24 @@ See also the examples in :ref:`control`. + - n/a + - A struct :c:type:`v4l2_ctrl_h264_decode_params`, containing H264 + decode parameters for stateless video decoders. ++ * - ``V4L2_CTRL_TYPE_HEVC_SPS`` ++ - n/a ++ - n/a ++ - n/a ++ - A struct :c:type:`v4l2_ctrl_hevc_sps`, containing HEVC Sequence ++ Parameter Set for stateless video decoders. ++ * - ``V4L2_CTRL_TYPE_HEVC_PPS`` ++ - n/a ++ - n/a ++ - n/a ++ - A struct :c:type:`v4l2_ctrl_hevc_pps`, containing HEVC Picture ++ Parameter Set for stateless video decoders. ++ * - ``V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS`` ++ - n/a ++ - n/a ++ - n/a ++ - A struct :c:type:`v4l2_ctrl_hevc_slice_params`, containing HEVC ++ slice parameters for stateless video decoders. + + .. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}| + +--- a/Documentation/media/videodev2.h.rst.exceptions ++++ b/Documentation/media/videodev2.h.rst.exceptions +@@ -141,6 +141,9 @@ replace symbol V4L2_CTRL_TYPE_H264_PPS : + replace symbol V4L2_CTRL_TYPE_H264_SCALING_MATRIX :c:type:`v4l2_ctrl_type` + replace symbol V4L2_CTRL_TYPE_H264_SLICE_PARAMS :c:type:`v4l2_ctrl_type` + replace symbol V4L2_CTRL_TYPE_H264_DECODE_PARAMS :c:type:`v4l2_ctrl_type` ++replace symbol V4L2_CTRL_TYPE_HEVC_SPS :c:type:`v4l2_ctrl_type` ++replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`v4l2_ctrl_type` ++replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`v4l2_ctrl_type` + replace symbol V4L2_CTRL_TYPE_AREA :c:type:`v4l2_ctrl_type` + + # V4L2 capability defines +--- a/drivers/media/v4l2-core/v4l2-ctrls.c ++++ b/drivers/media/v4l2-core/v4l2-ctrls.c +@@ -567,6 +567,16 @@ const char * const *v4l2_ctrl_get_menu(u + "Disabled at slice boundary", + "NULL", + }; ++ static const char * const hevc_decode_mode[] = { ++ "Slice-Based", ++ "Frame-Based", ++ NULL, ++ }; ++ static const char * const hevc_start_code[] = { ++ "No Start Code", ++ "Annex B Start Code", ++ NULL, ++ }; + + switch (id) { + case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: +@@ -688,7 +698,10 @@ const char * const *v4l2_ctrl_get_menu(u + return hevc_tier; + case V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE: + return hevc_loop_filter_mode; +- ++ case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE: ++ return hevc_decode_mode; ++ case V4L2_CID_MPEG_VIDEO_HEVC_START_CODE: ++ return hevc_start_code; + default: + return NULL; + } +@@ -958,6 +971,11 @@ const char *v4l2_ctrl_get_name(u32 id) + case V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD: return "HEVC Size of Length Field"; + case V4L2_CID_MPEG_VIDEO_REF_NUMBER_FOR_PFRAMES: return "Reference Frames for a P-Frame"; + case V4L2_CID_MPEG_VIDEO_PREPEND_SPSPPS_TO_IDR: return "Prepend SPS and PPS to IDR"; ++ case V4L2_CID_MPEG_VIDEO_HEVC_SPS: return "HEVC Sequence Parameter Set"; ++ case V4L2_CID_MPEG_VIDEO_HEVC_PPS: return "HEVC Picture Parameter Set"; ++ case V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS: return "HEVC Slice Parameters"; ++ case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE: return "HEVC Decode Mode"; ++ case V4L2_CID_MPEG_VIDEO_HEVC_START_CODE: return "HEVC Start Code"; + + /* CAMERA controls */ + /* Keep the order of the 'case's the same as in v4l2-controls.h! */ +@@ -1267,6 +1285,8 @@ void v4l2_ctrl_fill(u32 id, const char * + case V4L2_CID_MPEG_VIDEO_HEVC_SIZE_OF_LENGTH_FIELD: + case V4L2_CID_MPEG_VIDEO_HEVC_TIER: + case V4L2_CID_MPEG_VIDEO_HEVC_LOOP_FILTER_MODE: ++ case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE: ++ case V4L2_CID_MPEG_VIDEO_HEVC_START_CODE: + *type = V4L2_CTRL_TYPE_MENU; + break; + case V4L2_CID_LINK_FREQ: +@@ -1377,6 +1397,15 @@ void v4l2_ctrl_fill(u32 id, const char * + case V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER: + *type = V4L2_CTRL_TYPE_VP8_FRAME_HEADER; + break; ++ case V4L2_CID_MPEG_VIDEO_HEVC_SPS: ++ *type = V4L2_CTRL_TYPE_HEVC_SPS; ++ break; ++ case V4L2_CID_MPEG_VIDEO_HEVC_PPS: ++ *type = V4L2_CTRL_TYPE_HEVC_PPS; ++ break; ++ case V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS: ++ *type = V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS; ++ break; + case V4L2_CID_UNIT_CELL_SIZE: + *type = V4L2_CTRL_TYPE_AREA; + *flags |= V4L2_CTRL_FLAG_READ_ONLY; +@@ -1678,8 +1707,12 @@ static int std_validate_compound(const s + { + struct v4l2_ctrl_mpeg2_slice_params *p_mpeg2_slice_params; + struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header; ++ struct v4l2_ctrl_hevc_sps *p_hevc_sps; ++ struct v4l2_ctrl_hevc_pps *p_hevc_pps; ++ struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params; + struct v4l2_area *area; + void *p = ptr.p + idx * ctrl->elem_size; ++ unsigned int i; + + switch ((u32)ctrl->type) { + case V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS: +@@ -1755,11 +1788,76 @@ static int std_validate_compound(const s + zero_padding(p_vp8_frame_header->entropy_header); + zero_padding(p_vp8_frame_header->coder_state); + break; ++ ++ case V4L2_CTRL_TYPE_HEVC_SPS: ++ p_hevc_sps = p; ++ ++ if (!(p_hevc_sps->flags & V4L2_HEVC_SPS_FLAG_PCM_ENABLED)) { ++ p_hevc_sps->pcm_sample_bit_depth_luma_minus1 = 0; ++ p_hevc_sps->pcm_sample_bit_depth_chroma_minus1 = 0; ++ p_hevc_sps->log2_min_pcm_luma_coding_block_size_minus3 = 0; ++ p_hevc_sps->log2_diff_max_min_pcm_luma_coding_block_size = 0; ++ } ++ ++ if (!(p_hevc_sps->flags & ++ V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT)) ++ p_hevc_sps->num_long_term_ref_pics_sps = 0; ++ break; ++ ++ case V4L2_CTRL_TYPE_HEVC_PPS: ++ p_hevc_pps = p; ++ ++ if (!(p_hevc_pps->flags & ++ V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED)) ++ p_hevc_pps->diff_cu_qp_delta_depth = 0; ++ ++ if (!(p_hevc_pps->flags & V4L2_HEVC_PPS_FLAG_TILES_ENABLED)) { ++ p_hevc_pps->num_tile_columns_minus1 = 0; ++ p_hevc_pps->num_tile_rows_minus1 = 0; ++ memset(&p_hevc_pps->column_width_minus1, 0, ++ sizeof(p_hevc_pps->column_width_minus1)); ++ memset(&p_hevc_pps->row_height_minus1, 0, ++ sizeof(p_hevc_pps->row_height_minus1)); ++ ++ p_hevc_pps->flags &= ++ ~V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED; ++ } ++ ++ if (p_hevc_pps->flags & ++ V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER) { ++ p_hevc_pps->pps_beta_offset_div2 = 0; ++ p_hevc_pps->pps_tc_offset_div2 = 0; ++ } ++ ++ zero_padding(*p_hevc_pps); ++ break; ++ ++ case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS: ++ p_hevc_slice_params = p; ++ ++ if (p_hevc_slice_params->num_active_dpb_entries > ++ V4L2_HEVC_DPB_ENTRIES_NUM_MAX) ++ return -EINVAL; ++ ++ zero_padding(p_hevc_slice_params->pred_weight_table); ++ ++ for (i = 0; i < p_hevc_slice_params->num_active_dpb_entries; ++ i++) { ++ struct v4l2_hevc_dpb_entry *dpb_entry = ++ &p_hevc_slice_params->dpb[i]; ++ ++ zero_padding(*dpb_entry); ++ } ++ ++ zero_padding(*p_hevc_slice_params); ++ break; ++ + case V4L2_CTRL_TYPE_AREA: + area = p; + if (!area->width || !area->height) + return -EINVAL; + break; ++ + default: + return -EINVAL; + } +@@ -2433,6 +2531,15 @@ static struct v4l2_ctrl *v4l2_ctrl_new(s + case V4L2_CTRL_TYPE_VP8_FRAME_HEADER: + elem_size = sizeof(struct v4l2_ctrl_vp8_frame_header); + break; ++ case V4L2_CTRL_TYPE_HEVC_SPS: ++ elem_size = sizeof(struct v4l2_ctrl_hevc_sps); ++ break; ++ case V4L2_CTRL_TYPE_HEVC_PPS: ++ elem_size = sizeof(struct v4l2_ctrl_hevc_pps); ++ break; ++ case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS: ++ elem_size = sizeof(struct v4l2_ctrl_hevc_slice_params); ++ break; + case V4L2_CTRL_TYPE_AREA: + elem_size = sizeof(struct v4l2_area); + break; +--- a/drivers/media/v4l2-core/v4l2-ioctl.c ++++ b/drivers/media/v4l2-core/v4l2-ioctl.c +@@ -1356,6 +1356,7 @@ static void v4l_fill_fmtdesc(struct v4l2 + case V4L2_PIX_FMT_VP8_FRAME: descr = "VP8 Frame"; break; + case V4L2_PIX_FMT_VP9: descr = "VP9"; break; + case V4L2_PIX_FMT_HEVC: descr = "HEVC"; break; /* aka H.265 */ ++ case V4L2_PIX_FMT_HEVC_SLICE: descr = "HEVC Parsed Slice Data"; break; + case V4L2_PIX_FMT_FWHT: descr = "FWHT"; break; /* used in vicodec */ + case V4L2_PIX_FMT_FWHT_STATELESS: descr = "FWHT Stateless"; break; /* used in vicodec */ + case V4L2_PIX_FMT_CPIA1: descr = "GSPCA CPiA YUV"; break; +--- /dev/null ++++ b/include/media/hevc-ctrls.h +@@ -0,0 +1,212 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * These are the HEVC state controls for use with stateless HEVC ++ * codec drivers. ++ * ++ * It turns out that these structs are not stable yet and will undergo ++ * more changes. So keep them private until they are stable and ready to ++ * become part of the official public API. ++ */ ++ ++#ifndef _HEVC_CTRLS_H_ ++#define _HEVC_CTRLS_H_ ++ ++#include ++ ++/* The pixel format isn't stable at the moment and will likely be renamed. */ ++#define V4L2_PIX_FMT_HEVC_SLICE v4l2_fourcc('S', '2', '6', '5') /* HEVC parsed slices */ ++ ++#define V4L2_CID_MPEG_VIDEO_HEVC_SPS (V4L2_CID_MPEG_BASE + 1008) ++#define V4L2_CID_MPEG_VIDEO_HEVC_PPS (V4L2_CID_MPEG_BASE + 1009) ++#define V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (V4L2_CID_MPEG_BASE + 1010) ++#define V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (V4L2_CID_MPEG_BASE + 1015) ++#define V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (V4L2_CID_MPEG_BASE + 1016) ++ ++/* enum v4l2_ctrl_type type values */ ++#define V4L2_CTRL_TYPE_HEVC_SPS 0x0120 ++#define V4L2_CTRL_TYPE_HEVC_PPS 0x0121 ++#define V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS 0x0122 ++ ++enum v4l2_mpeg_video_hevc_decode_mode { ++ V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED, ++ V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED, ++}; ++ ++enum v4l2_mpeg_video_hevc_start_code { ++ V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE, ++ V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B, ++}; ++ ++#define V4L2_HEVC_SLICE_TYPE_B 0 ++#define V4L2_HEVC_SLICE_TYPE_P 1 ++#define V4L2_HEVC_SLICE_TYPE_I 2 ++ ++#define V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE (1ULL << 0) ++#define V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED (1ULL << 1) ++#define V4L2_HEVC_SPS_FLAG_AMP_ENABLED (1ULL << 2) ++#define V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET (1ULL << 3) ++#define V4L2_HEVC_SPS_FLAG_PCM_ENABLED (1ULL << 4) ++#define V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED (1ULL << 5) ++#define V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT (1ULL << 6) ++#define V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED (1ULL << 7) ++#define V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED (1ULL << 8) ++ ++/* The controls are not stable at the moment and will likely be reworked. */ ++struct v4l2_ctrl_hevc_sps { ++ /* ISO/IEC 23008-2, ITU-T Rec. H.265: Sequence parameter set */ ++ __u16 pic_width_in_luma_samples; ++ __u16 pic_height_in_luma_samples; ++ __u8 bit_depth_luma_minus8; ++ __u8 bit_depth_chroma_minus8; ++ __u8 log2_max_pic_order_cnt_lsb_minus4; ++ __u8 sps_max_dec_pic_buffering_minus1; ++ __u8 sps_max_num_reorder_pics; ++ __u8 sps_max_latency_increase_plus1; ++ __u8 log2_min_luma_coding_block_size_minus3; ++ __u8 log2_diff_max_min_luma_coding_block_size; ++ __u8 log2_min_luma_transform_block_size_minus2; ++ __u8 log2_diff_max_min_luma_transform_block_size; ++ __u8 max_transform_hierarchy_depth_inter; ++ __u8 max_transform_hierarchy_depth_intra; ++ __u8 pcm_sample_bit_depth_luma_minus1; ++ __u8 pcm_sample_bit_depth_chroma_minus1; ++ __u8 log2_min_pcm_luma_coding_block_size_minus3; ++ __u8 log2_diff_max_min_pcm_luma_coding_block_size; ++ __u8 num_short_term_ref_pic_sets; ++ __u8 num_long_term_ref_pics_sps; ++ __u8 chroma_format_idc; ++ ++ __u8 padding; ++ ++ __u64 flags; ++}; ++ ++#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT (1ULL << 0) ++#define V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT (1ULL << 1) ++#define V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED (1ULL << 2) ++#define V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT (1ULL << 3) ++#define V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED (1ULL << 4) ++#define V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED (1ULL << 5) ++#define V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED (1ULL << 6) ++#define V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT (1ULL << 7) ++#define V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED (1ULL << 8) ++#define V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED (1ULL << 9) ++#define V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED (1ULL << 10) ++#define V4L2_HEVC_PPS_FLAG_TILES_ENABLED (1ULL << 11) ++#define V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED (1ULL << 12) ++#define V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED (1ULL << 13) ++#define V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 14) ++#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED (1ULL << 15) ++#define V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER (1ULL << 16) ++#define V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT (1ULL << 17) ++#define V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT (1ULL << 18) ++ ++struct v4l2_ctrl_hevc_pps { ++ /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture parameter set */ ++ __u8 num_extra_slice_header_bits; ++ __s8 init_qp_minus26; ++ __u8 diff_cu_qp_delta_depth; ++ __s8 pps_cb_qp_offset; ++ __s8 pps_cr_qp_offset; ++ __u8 num_tile_columns_minus1; ++ __u8 num_tile_rows_minus1; ++ __u8 column_width_minus1[20]; ++ __u8 row_height_minus1[22]; ++ __s8 pps_beta_offset_div2; ++ __s8 pps_tc_offset_div2; ++ __u8 log2_parallel_merge_level_minus2; ++ ++ __u8 padding[4]; ++ __u64 flags; ++}; ++ ++#define V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_BEFORE 0x01 ++#define V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_AFTER 0x02 ++#define V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR 0x03 ++ ++#define V4L2_HEVC_DPB_ENTRIES_NUM_MAX 16 ++ ++struct v4l2_hevc_dpb_entry { ++ __u64 timestamp; ++ __u8 rps; ++ __u8 field_pic; ++ __u16 pic_order_cnt[2]; ++ __u8 padding[2]; ++}; ++ ++struct v4l2_hevc_pred_weight_table { ++ __s8 delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; ++ __s8 luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; ++ __s8 delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; ++ __s8 chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; ++ ++ __s8 delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; ++ __s8 luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; ++ __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; ++ __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; ++ ++ __u8 padding[6]; ++ ++ __u8 luma_log2_weight_denom; ++ __s8 delta_chroma_log2_weight_denom; ++}; ++ ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA (1ULL << 0) ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA (1ULL << 1) ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED (1ULL << 2) ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO (1ULL << 3) ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT (1ULL << 4) ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0 (1ULL << 5) ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV (1ULL << 6) ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED (1ULL << 7) ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 8) ++ ++struct v4l2_ctrl_hevc_slice_params { ++ __u32 bit_size; ++ __u32 data_bit_offset; ++ ++ /* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */ ++ __u8 nal_unit_type; ++ __u8 nuh_temporal_id_plus1; ++ ++ /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ ++ __u8 slice_type; ++ __u8 colour_plane_id; ++ __u16 slice_pic_order_cnt; ++ __u8 num_ref_idx_l0_active_minus1; ++ __u8 num_ref_idx_l1_active_minus1; ++ __u8 collocated_ref_idx; ++ __u8 five_minus_max_num_merge_cand; ++ __s8 slice_qp_delta; ++ __s8 slice_cb_qp_offset; ++ __s8 slice_cr_qp_offset; ++ __s8 slice_act_y_qp_offset; ++ __s8 slice_act_cb_qp_offset; ++ __s8 slice_act_cr_qp_offset; ++ __s8 slice_beta_offset_div2; ++ __s8 slice_tc_offset_div2; ++ ++ /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */ ++ __u8 pic_struct; ++ ++ /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ ++ __u8 num_active_dpb_entries; ++ __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; ++ __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; ++ ++ __u8 num_rps_poc_st_curr_before; ++ __u8 num_rps_poc_st_curr_after; ++ __u8 num_rps_poc_lt_curr; ++ ++ __u8 padding; ++ ++ /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ ++ struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; ++ ++ /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */ ++ struct v4l2_hevc_pred_weight_table pred_weight_table; ++ ++ __u64 flags; ++}; ++ ++#endif +--- a/include/media/v4l2-ctrls.h ++++ b/include/media/v4l2-ctrls.h +@@ -21,6 +21,7 @@ + #include + #include + #include ++#include + + /* forward references */ + struct file; +@@ -50,6 +51,9 @@ struct poll_table_struct; + * @p_h264_slice_params: Pointer to a struct v4l2_ctrl_h264_slice_params. + * @p_h264_decode_params: Pointer to a struct v4l2_ctrl_h264_decode_params. + * @p_vp8_frame_header: Pointer to a VP8 frame header structure. ++ * @p_hevc_sps: Pointer to an HEVC sequence parameter set structure. ++ * @p_hevc_pps: Pointer to an HEVC picture parameter set structure. ++ * @p_hevc_slice_params: Pointer to an HEVC slice parameters structure. + * @p_area: Pointer to an area. + * @p: Pointer to a compound value. + */ +@@ -69,6 +73,9 @@ union v4l2_ctrl_ptr { + struct v4l2_ctrl_h264_slice_params *p_h264_slice_params; + struct v4l2_ctrl_h264_decode_params *p_h264_decode_params; + struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header; ++ struct v4l2_ctrl_hevc_sps *p_hevc_sps; ++ struct v4l2_ctrl_hevc_pps *p_hevc_pps; ++ struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params; + struct v4l2_area *p_area; + void *p; + }; diff --git a/target/linux/bcm27xx/patches-5.4/950-0504-media-v4l2-mem2mem-Fix-hold-buf-flag-checks.patch b/target/linux/bcm27xx/patches-5.4/950-0504-media-v4l2-mem2mem-Fix-hold-buf-flag-checks.patch new file mode 100644 index 0000000000..18073a8f9d --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0504-media-v4l2-mem2mem-Fix-hold-buf-flag-checks.patch @@ -0,0 +1,37 @@ +From 73d8a76ec5b5e1240af4142a9ccbd39179d779af Mon Sep 17 00:00:00 2001 +From: Jernej Skrabec +Date: Wed, 6 Nov 2019 08:02:53 +0100 +Subject: [PATCH] media: v4l2-mem2mem: Fix hold buf flag checks + +Commit 1076df3a77b490d33429560a9e0603b3673223e2 upstream. + +Hold buf flag is set on output queue, not capture. Fix that. + +Fixes: f07602ac3887 ("media: v4l2-mem2mem: add new_frame detection") +Signed-off-by: Jernej Skrabec +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + drivers/media/v4l2-core/v4l2-mem2mem.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/media/v4l2-core/v4l2-mem2mem.c ++++ b/drivers/media/v4l2-core/v4l2-mem2mem.c +@@ -335,7 +335,7 @@ static void __v4l2_m2m_try_queue(struct + } + } + +- if (src && dst && (m2m_ctx->cap_q_ctx.q.subsystem_flags & ++ if (src && dst && (m2m_ctx->out_q_ctx.q.subsystem_flags & + VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF)) + m2m_ctx->new_frame = !dst->vb2_buf.copied_timestamp || + dst->vb2_buf.timestamp != src->vb2_buf.timestamp; +@@ -474,7 +474,7 @@ void v4l2_m2m_job_finish(struct v4l2_m2m + * holding capture buffers. Those should use + * v4l2_m2m_buf_done_and_job_finish() instead. + */ +- WARN_ON(m2m_ctx->cap_q_ctx.q.subsystem_flags & ++ WARN_ON(m2m_ctx->out_q_ctx.q.subsystem_flags & + VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF); + spin_lock_irqsave(&m2m_dev->job_spinlock, flags); + schedule_next = _v4l2_m2m_job_finish(m2m_dev, m2m_ctx); diff --git a/target/linux/bcm27xx/patches-5.4/950-0505-media-pixfmt-Document-the-HEVC-slice-pixel-format.patch b/target/linux/bcm27xx/patches-5.4/950-0505-media-pixfmt-Document-the-HEVC-slice-pixel-format.patch new file mode 100644 index 0000000000..7398807782 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0505-media-pixfmt-Document-the-HEVC-slice-pixel-format.patch @@ -0,0 +1,50 @@ +From 662256810630f6ac6d06ee0cdc5f4660b25f7e98 Mon Sep 17 00:00:00 2001 +From: Paul Kocialkowski +Date: Tue, 22 Oct 2019 12:26:53 -0300 +Subject: [PATCH] media: pixfmt: Document the HEVC slice pixel format + +Commit de06f289283298e2938445019999cec46435375c upstream. + +Document the current state of the HEVC slice pixel format. +The format will need to evolve in the future, which is why it is +not part of the public API. + +Signed-off-by: Paul Kocialkowski +Signed-off-by: Hans Verkuil +Signed-off-by: Mauro Carvalho Chehab +--- + .../media/uapi/v4l/pixfmt-compressed.rst | 23 +++++++++++++++++++ + 1 file changed, 23 insertions(+) + +--- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst ++++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst +@@ -188,6 +188,29 @@ Compressed Formats + If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM`` + then the decoder has no requirements since it can parse all the + information from the raw bytestream. ++ * .. _V4L2-PIX-FMT-HEVC-SLICE: ++ ++ - ``V4L2_PIX_FMT_HEVC_SLICE`` ++ - 'S265' ++ - HEVC parsed slice data, as extracted from the HEVC bitstream. ++ This format is adapted for stateless video decoders that implement a ++ HEVC pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`). ++ This pixelformat has two modifiers that must be set at least once ++ through the ``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE`` ++ and ``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE`` controls. ++ Metadata associated with the frame to decode is required to be passed ++ through the following controls : ++ * ``V4L2_CID_MPEG_VIDEO_HEVC_SPS`` ++ * ``V4L2_CID_MPEG_VIDEO_HEVC_PPS`` ++ * ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS`` ++ See the :ref:`associated Codec Control IDs `. ++ Buffers associated with this pixel format must contain the appropriate ++ number of macroblocks to decode a full corresponding frame. ++ ++ .. note:: ++ ++ This format is not yet part of the public kernel API and it ++ is expected to change. + * .. _V4L2-PIX-FMT-FWHT: + + - ``V4L2_PIX_FMT_FWHT`` diff --git a/target/linux/bcm27xx/patches-5.4/950-0506-media-uapi-hevc-Add-scaling-matrix-control.patch b/target/linux/bcm27xx/patches-5.4/950-0506-media-uapi-hevc-Add-scaling-matrix-control.patch new file mode 100644 index 0000000000..c2cf27a40e --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0506-media-uapi-hevc-Add-scaling-matrix-control.patch @@ -0,0 +1,150 @@ +From 70b5a28786215c996503210abd3e44c200771640 Mon Sep 17 00:00:00 2001 +From: Jernej Skrabec +Date: Fri, 13 Dec 2019 17:04:25 +0100 +Subject: [PATCH] media: uapi: hevc: Add scaling matrix control + +Taken from https://patchwork.linuxtv.org/patch/60728/ +Changes (mainly documentation) have been requested. + +HEVC has a scaling matrix concept. Add support for it. + +Signed-off-by: Jernej Skrabec +--- + .../media/uapi/v4l/ext-ctrls-codec.rst | 41 +++++++++++++++++++ + .../media/uapi/v4l/pixfmt-compressed.rst | 1 + + drivers/media/v4l2-core/v4l2-ctrls.c | 10 +++++ + include/media/hevc-ctrls.h | 11 +++++ + 4 files changed, 63 insertions(+) + +--- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst ++++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst +@@ -4174,6 +4174,47 @@ enum v4l2_mpeg_video_hevc_size_of_length + - ``padding[6]`` + - Applications and drivers must set this to zero. + ++``V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX (struct)`` ++ Specifies the scaling matrix (as extracted from the bitstream) for ++ the associated HEVC slice data. The bitstream parameters are ++ defined according to :ref:`hevc`, section 7.4.5 "Scaling list ++ data semantics". For further documentation, refer to the above ++ specification, unless there is an explicit comment stating ++ otherwise. ++ ++ .. note:: ++ ++ This compound control is not yet part of the public kernel API and ++ it is expected to change. ++ ++.. c:type:: v4l2_ctrl_hevc_scaling_matrix ++ ++.. cssclass:: longtable ++ ++.. flat-table:: struct v4l2_ctrl_hevc_scaling_matrix ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 1 1 2 ++ ++ * - __u8 ++ - ``scaling_list_4x4[6][16]`` ++ - ++ * - __u8 ++ - ``scaling_list_8x8[6][64]`` ++ - ++ * - __u8 ++ - ``scaling_list_16x16[6][64]`` ++ - ++ * - __u8 ++ - ``scaling_list_32x32[2][64]`` ++ - ++ * - __u8 ++ - ``scaling_list_dc_coef_16x16[6]`` ++ - ++ * - __u8 ++ - ``scaling_list_dc_coef_32x32[2]`` ++ - ++ + ``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)`` + Specifies the decoding mode to use. Currently exposes slice-based and + frame-based decoding but new modes might be added later on. +--- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst ++++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst +@@ -203,6 +203,7 @@ Compressed Formats + * ``V4L2_CID_MPEG_VIDEO_HEVC_SPS`` + * ``V4L2_CID_MPEG_VIDEO_HEVC_PPS`` + * ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS`` ++ * ``V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX`` + See the :ref:`associated Codec Control IDs `. + Buffers associated with this pixel format must contain the appropriate + number of macroblocks to decode a full corresponding frame. +--- a/drivers/media/v4l2-core/v4l2-ctrls.c ++++ b/drivers/media/v4l2-core/v4l2-ctrls.c +@@ -974,6 +974,7 @@ const char *v4l2_ctrl_get_name(u32 id) + case V4L2_CID_MPEG_VIDEO_HEVC_SPS: return "HEVC Sequence Parameter Set"; + case V4L2_CID_MPEG_VIDEO_HEVC_PPS: return "HEVC Picture Parameter Set"; + case V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS: return "HEVC Slice Parameters"; ++ case V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX: return "HEVC Scaling Matrix"; + case V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE: return "HEVC Decode Mode"; + case V4L2_CID_MPEG_VIDEO_HEVC_START_CODE: return "HEVC Start Code"; + +@@ -1406,6 +1407,9 @@ void v4l2_ctrl_fill(u32 id, const char * + case V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS: + *type = V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS; + break; ++ case V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX: ++ *type = V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX; ++ break; + case V4L2_CID_UNIT_CELL_SIZE: + *type = V4L2_CTRL_TYPE_AREA; + *flags |= V4L2_CTRL_FLAG_READ_ONLY; +@@ -1852,6 +1856,9 @@ static int std_validate_compound(const s + zero_padding(*p_hevc_slice_params); + break; + ++ case V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX: ++ break; ++ + case V4L2_CTRL_TYPE_AREA: + area = p; + if (!area->width || !area->height) +@@ -2540,6 +2547,9 @@ static struct v4l2_ctrl *v4l2_ctrl_new(s + case V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS: + elem_size = sizeof(struct v4l2_ctrl_hevc_slice_params); + break; ++ case V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX: ++ elem_size = sizeof(struct v4l2_ctrl_hevc_scaling_matrix); ++ break; + case V4L2_CTRL_TYPE_AREA: + elem_size = sizeof(struct v4l2_area); + break; +--- a/include/media/hevc-ctrls.h ++++ b/include/media/hevc-ctrls.h +@@ -19,6 +19,7 @@ + #define V4L2_CID_MPEG_VIDEO_HEVC_SPS (V4L2_CID_MPEG_BASE + 1008) + #define V4L2_CID_MPEG_VIDEO_HEVC_PPS (V4L2_CID_MPEG_BASE + 1009) + #define V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (V4L2_CID_MPEG_BASE + 1010) ++#define V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX (V4L2_CID_MPEG_BASE + 1011) + #define V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (V4L2_CID_MPEG_BASE + 1015) + #define V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (V4L2_CID_MPEG_BASE + 1016) + +@@ -26,6 +27,7 @@ + #define V4L2_CTRL_TYPE_HEVC_SPS 0x0120 + #define V4L2_CTRL_TYPE_HEVC_PPS 0x0121 + #define V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS 0x0122 ++#define V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX 0x0123 + + enum v4l2_mpeg_video_hevc_decode_mode { + V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED, +@@ -209,4 +211,13 @@ struct v4l2_ctrl_hevc_slice_params { + __u64 flags; + }; + ++struct v4l2_ctrl_hevc_scaling_matrix { ++ __u8 scaling_list_4x4[6][16]; ++ __u8 scaling_list_8x8[6][64]; ++ __u8 scaling_list_16x16[6][64]; ++ __u8 scaling_list_32x32[2][64]; ++ __u8 scaling_list_dc_coef_16x16[6]; ++ __u8 scaling_list_dc_coef_32x32[2]; ++}; ++ + #endif diff --git a/target/linux/bcm27xx/patches-5.4/950-0507-media-uapi-hevc-Add-segment-address-field.patch b/target/linux/bcm27xx/patches-5.4/950-0507-media-uapi-hevc-Add-segment-address-field.patch new file mode 100644 index 0000000000..91f195b4ae --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0507-media-uapi-hevc-Add-segment-address-field.patch @@ -0,0 +1,61 @@ +From 88eb3b015b6f61252fd214d39fc7fc0379ee0442 Mon Sep 17 00:00:00 2001 +From: Jernej Skrabec +Date: Fri, 13 Dec 2019 17:04:27 +0100 +Subject: [PATCH] media: uapi: hevc: Add segment address field + +From https://patchwork.linuxtv.org/patch/60725/ +Changes requested, but mainly docs. + +If HEVC frame consists of multiple slices, segment address has to be +known in order to properly decode it. + +Add segment address field to slice parameters. + +Signed-off-by: Jernej Skrabec +--- + Documentation/media/uapi/v4l/ext-ctrls-codec.rst | 5 ++++- + include/media/hevc-ctrls.h | 5 ++++- + 2 files changed, 8 insertions(+), 2 deletions(-) + +--- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst ++++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst +@@ -3969,6 +3969,9 @@ enum v4l2_mpeg_video_hevc_size_of_length + * - __u32 + - ``data_bit_offset`` + - Offset (in bits) to the video data in the current slice data. ++ * - __u32 ++ - ``slice_segment_addr`` ++ - + * - __u8 + - ``nal_unit_type`` + - +@@ -4046,7 +4049,7 @@ enum v4l2_mpeg_video_hevc_size_of_length + - ``num_rps_poc_lt_curr`` + - The number of reference pictures in the long-term set. + * - __u8 +- - ``padding[7]`` ++ - ``padding[5]`` + - Applications and drivers must set this to zero. + * - struct :c:type:`v4l2_hevc_dpb_entry` + - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` +--- a/include/media/hevc-ctrls.h ++++ b/include/media/hevc-ctrls.h +@@ -167,6 +167,9 @@ struct v4l2_ctrl_hevc_slice_params { + __u32 bit_size; + __u32 data_bit_offset; + ++ /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ ++ __u32 slice_segment_addr; ++ + /* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */ + __u8 nal_unit_type; + __u8 nuh_temporal_id_plus1; +@@ -200,7 +203,7 @@ struct v4l2_ctrl_hevc_slice_params { + __u8 num_rps_poc_st_curr_after; + __u8 num_rps_poc_lt_curr; + +- __u8 padding; ++ __u8 padding[5]; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ + struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; diff --git a/target/linux/bcm27xx/patches-5.4/950-0508-media-hevc_ctrls-Add-slice-param-dependent-slice-seg.patch b/target/linux/bcm27xx/patches-5.4/950-0508-media-hevc_ctrls-Add-slice-param-dependent-slice-seg.patch new file mode 100644 index 0000000000..1353480476 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0508-media-hevc_ctrls-Add-slice-param-dependent-slice-seg.patch @@ -0,0 +1,23 @@ +From e8355c6b60adb6704c9fb863f380f2d7b457d82c Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 23 Mar 2020 18:34:01 +0000 +Subject: [PATCH] media: hevc_ctrls: Add slice param dependent slice + segment + +Adds V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT define. + +Signed-off-by: Dave Stevenson +--- + include/media/hevc-ctrls.h | 1 + + 1 file changed, 1 insertion(+) + +--- a/include/media/hevc-ctrls.h ++++ b/include/media/hevc-ctrls.h +@@ -162,6 +162,7 @@ struct v4l2_hevc_pred_weight_table { + #define V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV (1ULL << 6) + #define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED (1ULL << 7) + #define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 8) ++#define V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT (1ULL << 9) + + struct v4l2_ctrl_hevc_slice_params { + __u32 bit_size; diff --git a/target/linux/bcm27xx/patches-5.4/950-0509-media-uapi-Add-hevc-ctrls-for-WPP-decoding.patch b/target/linux/bcm27xx/patches-5.4/950-0509-media-uapi-Add-hevc-ctrls-for-WPP-decoding.patch new file mode 100644 index 0000000000..234cb82b2a --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0509-media-uapi-Add-hevc-ctrls-for-WPP-decoding.patch @@ -0,0 +1,40 @@ +From 6a42d17668699234bfa2d459e29cc2732e59759b Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Mon, 23 Mar 2020 19:00:17 +0000 +Subject: [PATCH] media: uapi: Add hevc ctrls for WPP decoding + +WPP can allow greater parallelism within the decode, but needs +offset information to be passed in. + +Adds num_entry_point_offsets and entry_point_offset_minus1 to +v4l2_ctrl_hevc_slice_params. + +This is based on Jernej Skrabec's patches for cedrus which +implement the same feature. + +Signed-off-by: Dave Stevenson +--- + include/media/hevc-ctrls.h | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/include/media/hevc-ctrls.h ++++ b/include/media/hevc-ctrls.h +@@ -170,6 +170,7 @@ struct v4l2_ctrl_hevc_slice_params { + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ + __u32 slice_segment_addr; ++ __u32 num_entry_point_offsets; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */ + __u8 nal_unit_type; +@@ -204,7 +205,9 @@ struct v4l2_ctrl_hevc_slice_params { + __u8 num_rps_poc_st_curr_after; + __u8 num_rps_poc_lt_curr; + +- __u8 padding[5]; ++ __u8 padding; ++ ++ __u32 entry_point_offset_minus1[256]; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ + struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; diff --git a/target/linux/bcm27xx/patches-5.4/950-0510-media-videodev2.h-Add-a-format-for-column-YUV4-2-0-m.patch b/target/linux/bcm27xx/patches-5.4/950-0510-media-videodev2.h-Add-a-format-for-column-YUV4-2-0-m.patch new file mode 100644 index 0000000000..840541cd2e --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0510-media-videodev2.h-Add-a-format-for-column-YUV4-2-0-m.patch @@ -0,0 +1,302 @@ +From a8f52dad0ed65192eb880a4a1ca90b236e99711e Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 24 Jan 2020 14:28:21 +0000 +Subject: [PATCH] media: videodev2.h: Add a format for column YUV4:2:0 + modes + +Some of the Broadcom codec blocks use a column based YUV4:2:0 image +format, so add the documentation and defines for both 8 and 10 bit +versions. + +Signed-off-by: Dave Stevenson +--- + .../media/uapi/v4l/pixfmt-nv12-col128.rst | 215 ++++++++++++++++++ + Documentation/media/uapi/v4l/pixfmt-nv12.rst | 14 +- + Documentation/media/uapi/v4l/yuv-formats.rst | 1 + + drivers/media/v4l2-core/v4l2-ioctl.c | 2 + + include/uapi/linux/videodev2.h | 4 + + 5 files changed, 233 insertions(+), 3 deletions(-) + create mode 100644 Documentation/media/uapi/v4l/pixfmt-nv12-col128.rst + +--- /dev/null ++++ b/Documentation/media/uapi/v4l/pixfmt-nv12-col128.rst +@@ -0,0 +1,215 @@ ++.. Permission is granted to copy, distribute and/or modify this ++.. document under the terms of the GNU Free Documentation License, ++.. Version 1.1 or any later version published by the Free Software ++.. Foundation, with no Invariant Sections, no Front-Cover Texts ++.. and no Back-Cover Texts. A copy of the license is included at ++.. Documentation/media/uapi/fdl-appendix.rst. ++.. ++.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections ++ ++.. _V4L2_PIX_FMT_NV12_COL128: ++.. _V4L2_PIX_FMT_NV12_10_COL128: ++ ++******************************************************************************** ++V4L2_PIX_FMT_NV12_COL128, V4L2_PIX_FMT_NV12_10_COL128 ++******************************************************************************** ++ ++ ++V4L2_PIX_FMT_NV21_COL128 ++Formats with ½ horizontal and vertical chroma resolution. This format ++has two planes - one for luminance and one for chrominance. Chroma ++samples are interleaved. The difference to ``V4L2_PIX_FMT_NV12`` is the ++memory layout. The image is split into columns of 128 bytes wide rather than ++being in raster order. ++ ++V4L2_PIX_FMT_NV12_10_COL128 ++Follows the same pattern as ``V4L2_PIX_FMT_NV21_COL128`` with 128 byte, but is ++a 10bit format with 3 10-bit samples being packed into 4 bytes. Each 128 byte ++wide column therefore contains 96 samples. ++ ++ ++Description ++=========== ++ ++This is the two-plane versions of the YUV 4:2:0 format where data is ++grouped into 128 byte wide columns. The three components are separated into ++two sub-images or planes. The Y plane has one byte per pixel and pixels ++are grouped into 128 byte wide columns. The CbCr plane has the same width, ++in bytes, as the Y plane (and the image), but is half as tall in pixels. ++The chroma plane is also in 128 byte columns, reflecting 64 Cb and 64 Cr ++samples. ++ ++The chroma samples for a column follow the luma samples. If there is any ++paddding, then that will be reflected via the selection API. ++The luma height must be a multiple of 2 lines. ++ ++The normal bytesperline is effectively fixed at 128. However the format ++requires knowledge of the stride between columns, therefore the bytesperline ++value has been repurposed to denote the number of 128 byte long lines between ++the start of each column. ++ ++**Byte Order.** ++ ++ ++.. flat-table:: ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 12 12 12 12 12 4 12 12 12 12 ++ ++ * - start + 0: ++ - Y'\ :sub:`0,0` ++ - Y'\ :sub:`0,1` ++ - Y'\ :sub:`0,2` ++ - Y'\ :sub:`0,3` ++ - ... ++ - Y'\ :sub:`0,124` ++ - Y'\ :sub:`0,125` ++ - Y'\ :sub:`0,126` ++ - Y'\ :sub:`0,127` ++ * - start + 128: ++ - Y'\ :sub:`1,0` ++ - Y'\ :sub:`1,1` ++ - Y'\ :sub:`1,2` ++ - Y'\ :sub:`1,3` ++ - ... ++ - Y'\ :sub:`1,124` ++ - Y'\ :sub:`1,125` ++ - Y'\ :sub:`1,126` ++ - Y'\ :sub:`1,127` ++ * - start + 256: ++ - Y'\ :sub:`2,0` ++ - Y'\ :sub:`2,1` ++ - Y'\ :sub:`2,2` ++ - Y'\ :sub:`2,3` ++ - ... ++ - Y'\ :sub:`2,124` ++ - Y'\ :sub:`2,125` ++ - Y'\ :sub:`2,126` ++ - Y'\ :sub:`2,127` ++ * - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ * - start + ((height-1) * 128): ++ - Y'\ :sub:`height-1,0` ++ - Y'\ :sub:`height-1,1` ++ - Y'\ :sub:`height-1,2` ++ - Y'\ :sub:`height-1,3` ++ - ... ++ - Y'\ :sub:`height-1,124` ++ - Y'\ :sub:`height-1,125` ++ - Y'\ :sub:`height-1,126` ++ - Y'\ :sub:`height-1,127` ++ * - start + ((height) * 128): ++ - Cb\ :sub:`0,0` ++ - Cr\ :sub:`0,0` ++ - Cb\ :sub:`0,1` ++ - Cr\ :sub:`0,1` ++ - ... ++ - Cb\ :sub:`0,62` ++ - Cr\ :sub:`0,62` ++ - Cb\ :sub:`0,63` ++ - Cr\ :sub:`0,63` ++ * - start + ((height+1) * 128): ++ - Cb\ :sub:`1,0` ++ - Cr\ :sub:`1,0` ++ - Cb\ :sub:`1,1` ++ - Cr\ :sub:`1,1` ++ - ... ++ - Cb\ :sub:`1,62` ++ - Cr\ :sub:`1,62` ++ - Cb\ :sub:`1,63` ++ - Cr\ :sub:`1,63` ++ * - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ * - start + ((height+(height/2)-1) * 128): ++ - Cb\ :sub:`(height/2)-1,0` ++ - Cr\ :sub:`(height/2)-1,0` ++ - Cb\ :sub:`(height/2)-1,1` ++ - Cr\ :sub:`(height/2)-1,1` ++ - ... ++ - Cb\ :sub:`(height/2)-1,62` ++ - Cr\ :sub:`(height/2)-1,62` ++ - Cb\ :sub:`(height/2)-1,63` ++ - Cr\ :sub:`(height/2)-1,63` ++ * - start + (bytesperline * 128): ++ - Y'\ :sub:`0,128` ++ - Y'\ :sub:`0,129` ++ - Y'\ :sub:`0,130` ++ - Y'\ :sub:`0,131` ++ - ... ++ - Y'\ :sub:`0,252` ++ - Y'\ :sub:`0,253` ++ - Y'\ :sub:`0,254` ++ - Y'\ :sub:`0,255` ++ * - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ - ... ++ ++V4L2_PIX_FMT_NV12_10_COL128 uses the same 128 byte column structure, but ++encodes 10-bit YUV. ++3 10-bit values are packed into 4 bytes as bits 9:0, 19:10, and 29:20, with ++bits 30 & 31 unused. For the luma plane, bits 9:0 are Y0, 19:10 are Y1, and ++29:20 are Y2. For the chroma plane the samples always come in pairs of Cr ++and Cb, so it needs to be considered 6 values packed in 8 bytes. ++ ++Bit-packed representation. ++ ++.. raw:: latex ++ ++ \small ++ ++.. tabularcolumns:: |p{1.2cm}||p{1.2cm}||p{1.2cm}||p{1.2cm}|p{3.2cm}|p{3.2cm}| ++ ++.. flat-table:: ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 8 8 8 8 ++ ++ * - Y'\ :sub:`00[7:0]` ++ - Y'\ :sub:`01[5:0] (bits 7--2)` Y'\ :sub:`00[9:8]`\ (bits 1--0) ++ - Y'\ :sub:`02[3:0] (bits 7--4)` Y'\ :sub:`01[9:6]`\ (bits 3--0) ++ - unused (bits 7--6)` Y'\ :sub:`02[9:4]`\ (bits 5--0) ++ ++.. raw:: latex ++ ++ \small ++ ++.. tabularcolumns:: |p{1.2cm}||p{1.2cm}||p{1.2cm}||p{1.2cm}|p{3.2cm}|p{3.2cm}| ++ ++.. flat-table:: ++ :header-rows: 0 ++ :stub-columns: 0 ++ :widths: 12 12 12 12 12 12 12 12 ++ ++ * - Cb\ :sub:`00[7:0]` ++ - Cr\ :sub:`00[5:0]`\ (bits 7--2) Cb\ :sub:`00[9:8]`\ (bits 1--0) ++ - Cb\ :sub:`01[3:0]`\ (bits 7--4) Cr\ :sub:`00[9:6]`\ (bits 3--0) ++ - unused (bits 7--6) Cb\ :sub:`02[9:4]`\ (bits 5--0) ++ - Cr\ :sub:`01[7:0]` ++ - Cb\ :sub:`02[5:0]`\ (bits 7--2) Cr\ :sub:`01[9:8]`\ (bits 1--0) ++ - Cr\ :sub:`02[3:0]`\ (bits 7--4) Cb\ :sub:`02[9:6]`\ (bits 3--0) ++ - unused (bits 7--6) Cr\ :sub:`02[9:4]`\ (bits 5--0) ++ ++.. raw:: latex ++ ++ \normalsize ++ ++ ++ ++ +--- a/Documentation/media/uapi/v4l/pixfmt-nv12.rst ++++ b/Documentation/media/uapi/v4l/pixfmt-nv12.rst +@@ -10,9 +10,9 @@ + .. _V4L2-PIX-FMT-NV12: + .. _V4L2-PIX-FMT-NV21: + +-****************************************************** +-V4L2_PIX_FMT_NV12 ('NV12'), V4L2_PIX_FMT_NV21 ('NV21') +-****************************************************** ++******************************************************************************** ++V4L2_PIX_FMT_NV12 ('NV12'), V4L2_PIX_FMT_NV21 ('NV21'), V4L2_PIX_FMT_NV12_COL128 ++******************************************************************************** + + + V4L2_PIX_FMT_NV21 +@@ -38,6 +38,14 @@ with a Cr byte. + If the Y plane has pad bytes after each row, then the CbCr plane has as + many pad bytes after its rows. + ++``V4L2_PIX_FMT_NV12_COL128`` is the tiled version of ++``V4L2_PIX_FMT_NV12`` with the image broken down into 128 pixel wide columns of ++Y followed by the associated combined CbCr plane. ++The normal bytesperline is effectively fixed at 128. However the format ++requires knowledge of the stride between columns, therefore the bytesperline ++value has been repurposed to denote the number of 128 byte long lines between ++the start of each column. ++ + **Byte Order.** + Each cell is one byte. + +--- a/Documentation/media/uapi/v4l/yuv-formats.rst ++++ b/Documentation/media/uapi/v4l/yuv-formats.rst +@@ -57,6 +57,7 @@ to brightness information. + pixfmt-nv12 + pixfmt-nv12m + pixfmt-nv12mt ++ pixfmt-nv12-col128 + pixfmt-nv16 + pixfmt-nv16m + pixfmt-nv24 +--- a/drivers/media/v4l2-core/v4l2-ioctl.c ++++ b/drivers/media/v4l2-core/v4l2-ioctl.c +@@ -1258,6 +1258,8 @@ static void v4l_fill_fmtdesc(struct v4l2 + case V4L2_PIX_FMT_NV61M: descr = "Y/CrCb 4:2:2 (N-C)"; break; + case V4L2_PIX_FMT_NV12MT: descr = "Y/CbCr 4:2:0 (64x32 MB, N-C)"; break; + case V4L2_PIX_FMT_NV12MT_16X16: descr = "Y/CbCr 4:2:0 (16x16 MB, N-C)"; break; ++ case V4L2_PIX_FMT_NV12_COL128: descr = "Y/CbCr 4:2:0 (128b cols)"; break; ++ case V4L2_PIX_FMT_NV12_10_COL128: descr = "10-bit Y/CbCr 4:2:0 (128b cols)"; break; + case V4L2_PIX_FMT_YUV420M: descr = "Planar YUV 4:2:0 (N-C)"; break; + case V4L2_PIX_FMT_YVU420M: descr = "Planar YVU 4:2:0 (N-C)"; break; + case V4L2_PIX_FMT_YUV422M: descr = "Planar YUV 4:2:2 (N-C)"; break; +--- a/include/uapi/linux/videodev2.h ++++ b/include/uapi/linux/videodev2.h +@@ -737,6 +737,10 @@ struct v4l2_pix_format { + #define V4L2_PIX_FMT_INZI v4l2_fourcc('I', 'N', 'Z', 'I') /* Intel Planar Greyscale 10-bit and Depth 16-bit */ + #define V4L2_PIX_FMT_SUNXI_TILED_NV12 v4l2_fourcc('S', 'T', '1', '2') /* Sunxi Tiled NV12 Format */ + #define V4L2_PIX_FMT_CNF4 v4l2_fourcc('C', 'N', 'F', '4') /* Intel 4-bit packed depth confidence information */ ++#define V4L2_PIX_FMT_NV12_COL128 v4l2_fourcc('N', 'C', '1', '2') /* 12 Y/CbCr 4:2:0 128 pixel wide column */ ++#define V4L2_PIX_FMT_NV12_10_COL128 v4l2_fourcc('N', 'C', '3', '0') ++ /* Y/CbCr 4:2:0 10bpc, 3x10 packed as 4 bytes in ++ * a 128 bytes / 96 pixel wide column */ + + /* 10bit raw bayer packed, 32 bytes for every 25 pixels, last LSB 6 bits unused */ + #define V4L2_PIX_FMT_IPU3_SBGGR10 v4l2_fourcc('i', 'p', '3', 'b') /* IPU3 packed 10-bit BGGR bayer */ diff --git a/target/linux/bcm27xx/patches-5.4/950-0511-media-v4l2-mem2mem-allow-request-job-buffer-processi.patch b/target/linux/bcm27xx/patches-5.4/950-0511-media-v4l2-mem2mem-allow-request-job-buffer-processi.patch new file mode 100644 index 0000000000..a3023cae2b --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0511-media-v4l2-mem2mem-allow-request-job-buffer-processi.patch @@ -0,0 +1,274 @@ +From b8ae9d55d468a9f55524296247dba93531c29c99 Mon Sep 17 00:00:00 2001 +From: John Cox +Date: Thu, 5 Mar 2020 14:46:54 +0000 +Subject: [PATCH] media: v4l2-mem2mem: allow request job buffer + processing after job finish + +Allow the capture buffer to be detached from a v4l2 request job such +that another job can start before the capture buffer is returned. This +allows h/w codecs that can process multiple requests at the same time +to operate more efficiently. + +Signed-off-by: John Cox +--- + drivers/media/v4l2-core/v4l2-mem2mem.c | 105 +++++++++++++++++++++++-- + include/media/v4l2-mem2mem.h | 47 +++++++++++ + include/media/videobuf2-v4l2.h | 3 + + 3 files changed, 149 insertions(+), 6 deletions(-) + +--- a/drivers/media/v4l2-core/v4l2-mem2mem.c ++++ b/drivers/media/v4l2-core/v4l2-mem2mem.c +@@ -399,15 +399,18 @@ static void v4l2_m2m_cancel_job(struct v + { + struct v4l2_m2m_dev *m2m_dev; + unsigned long flags; ++ bool det_abort_req; + + m2m_dev = m2m_ctx->m2m_dev; + spin_lock_irqsave(&m2m_dev->job_spinlock, flags); + ++ det_abort_req = !list_empty(&m2m_ctx->det_list); + m2m_ctx->job_flags |= TRANS_ABORT; + if (m2m_ctx->job_flags & TRANS_RUNNING) { + spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); + if (m2m_dev->m2m_ops->job_abort) + m2m_dev->m2m_ops->job_abort(m2m_ctx->priv); ++ det_abort_req = false; + dprintk("m2m_ctx %p running, will wait to complete\n", m2m_ctx); + wait_event(m2m_ctx->finished, + !(m2m_ctx->job_flags & TRANS_RUNNING)); +@@ -421,6 +424,11 @@ static void v4l2_m2m_cancel_job(struct v + /* Do nothing, was not on queue/running */ + spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); + } ++ ++ /* Wait for detached buffers to come back too */ ++ if (det_abort_req && m2m_dev->m2m_ops->job_abort) ++ m2m_dev->m2m_ops->job_abort(m2m_ctx->priv); ++ wait_event(m2m_ctx->det_empty, list_empty(&m2m_ctx->det_list)); + } + + /* +@@ -458,6 +466,7 @@ static bool _v4l2_m2m_job_finish(struct + + list_del(&m2m_dev->curr_ctx->queue); + m2m_dev->curr_ctx->job_flags &= ~(TRANS_QUEUED | TRANS_RUNNING); ++ m2m_ctx->cap_detached = false; + wake_up(&m2m_dev->curr_ctx->finished); + m2m_dev->curr_ctx = NULL; + return true; +@@ -485,6 +494,80 @@ void v4l2_m2m_job_finish(struct v4l2_m2m + } + EXPORT_SYMBOL(v4l2_m2m_job_finish); + ++struct vb2_v4l2_buffer *_v4l2_m2m_cap_buf_detach(struct v4l2_m2m_ctx *m2m_ctx) ++{ ++ struct vb2_v4l2_buffer *buf; ++ ++ buf = v4l2_m2m_dst_buf_remove(m2m_ctx); ++ list_add_tail(&container_of(buf, struct v4l2_m2m_buffer, vb)->list, ++ &m2m_ctx->det_list); ++ m2m_ctx->cap_detached = true; ++ buf->is_held = true; ++ buf->det_state = VB2_BUF_STATE_ACTIVE; ++ ++ return buf; ++} ++ ++struct vb2_v4l2_buffer *v4l2_m2m_cap_buf_detach(struct v4l2_m2m_dev *m2m_dev, ++ struct v4l2_m2m_ctx *m2m_ctx) ++{ ++ unsigned long flags; ++ struct vb2_v4l2_buffer *src_buf, *dst_buf; ++ ++ spin_lock_irqsave(&m2m_dev->job_spinlock, flags); ++ ++ dst_buf = NULL; ++ src_buf = v4l2_m2m_next_src_buf(m2m_ctx); ++ ++ if (!(src_buf->flags & V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF) && ++ !m2m_ctx->cap_detached) ++ dst_buf = _v4l2_m2m_cap_buf_detach(m2m_ctx); ++ ++ spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); ++ return dst_buf; ++} ++EXPORT_SYMBOL(v4l2_m2m_cap_buf_detach); ++ ++static void _v4l2_m2m_cap_buf_return(struct v4l2_m2m_ctx *m2m_ctx, ++ struct vb2_v4l2_buffer *buf, ++ enum vb2_buffer_state state) ++{ ++ buf->det_state = state; ++ ++ /* ++ * Always signal done in the order we got stuff ++ * Stop if we find a buf that is still in use ++ */ ++ while (!list_empty(&m2m_ctx->det_list)) { ++ buf = &list_first_entry(&m2m_ctx->det_list, ++ struct v4l2_m2m_buffer, list)->vb; ++ state = buf->det_state; ++ if (state != VB2_BUF_STATE_DONE && ++ state != VB2_BUF_STATE_ERROR) ++ return; ++ list_del(&container_of(buf, struct v4l2_m2m_buffer, vb)->list); ++ buf->det_state = VB2_BUF_STATE_DEQUEUED; ++ v4l2_m2m_buf_done(buf, state); ++ } ++ wake_up(&m2m_ctx->det_empty); ++} ++ ++void v4l2_m2m_cap_buf_return(struct v4l2_m2m_dev *m2m_dev, ++ struct v4l2_m2m_ctx *m2m_ctx, ++ struct vb2_v4l2_buffer *buf, ++ enum vb2_buffer_state state) ++{ ++ unsigned long flags; ++ ++ if (!buf) ++ return; ++ ++ spin_lock_irqsave(&m2m_dev->job_spinlock, flags); ++ _v4l2_m2m_cap_buf_return(m2m_ctx, buf, state); ++ spin_unlock_irqrestore(&m2m_dev->job_spinlock, flags); ++} ++EXPORT_SYMBOL(v4l2_m2m_cap_buf_return); ++ + void v4l2_m2m_buf_done_and_job_finish(struct v4l2_m2m_dev *m2m_dev, + struct v4l2_m2m_ctx *m2m_ctx, + enum vb2_buffer_state state) +@@ -495,15 +578,23 @@ void v4l2_m2m_buf_done_and_job_finish(st + + spin_lock_irqsave(&m2m_dev->job_spinlock, flags); + src_buf = v4l2_m2m_src_buf_remove(m2m_ctx); +- dst_buf = v4l2_m2m_next_dst_buf(m2m_ctx); + +- if (WARN_ON(!src_buf || !dst_buf)) ++ if (WARN_ON(!src_buf)) + goto unlock; + v4l2_m2m_buf_done(src_buf, state); +- dst_buf->is_held = src_buf->flags & V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF; +- if (!dst_buf->is_held) { +- v4l2_m2m_dst_buf_remove(m2m_ctx); +- v4l2_m2m_buf_done(dst_buf, state); ++ ++ if (!m2m_ctx->cap_detached) { ++ dst_buf = v4l2_m2m_next_dst_buf(m2m_ctx); ++ if (WARN_ON(!dst_buf)) ++ goto unlock; ++ ++ dst_buf->is_held = src_buf->flags ++ & V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF; ++ ++ if (!dst_buf->is_held) { ++ dst_buf = _v4l2_m2m_cap_buf_detach(m2m_ctx); ++ _v4l2_m2m_cap_buf_return(m2m_ctx, dst_buf, state); ++ } + } + schedule_next = _v4l2_m2m_job_finish(m2m_dev, m2m_ctx); + unlock: +@@ -983,12 +1074,14 @@ struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(s + m2m_ctx->priv = drv_priv; + m2m_ctx->m2m_dev = m2m_dev; + init_waitqueue_head(&m2m_ctx->finished); ++ init_waitqueue_head(&m2m_ctx->det_empty); + + out_q_ctx = &m2m_ctx->out_q_ctx; + cap_q_ctx = &m2m_ctx->cap_q_ctx; + + INIT_LIST_HEAD(&out_q_ctx->rdy_queue); + INIT_LIST_HEAD(&cap_q_ctx->rdy_queue); ++ INIT_LIST_HEAD(&m2m_ctx->det_list); + spin_lock_init(&out_q_ctx->rdy_spinlock); + spin_lock_init(&cap_q_ctx->rdy_spinlock); + +--- a/include/media/v4l2-mem2mem.h ++++ b/include/media/v4l2-mem2mem.h +@@ -88,6 +88,9 @@ struct v4l2_m2m_queue_ctx { + * %TRANS_QUEUED, %TRANS_RUNNING and %TRANS_ABORT. + * @finished: Wait queue used to signalize when a job queue finished. + * @priv: Instance private data ++ * @cap_detached: Current job's capture buffer has been detached ++ * @det_list: List of detached (post-job but still in flight) capture buffers ++ * @det_empty: Wait queue signalled when det_list goes empty + * + * The memory to memory context is specific to a file handle, NOT to e.g. + * a device. +@@ -111,6 +114,11 @@ struct v4l2_m2m_ctx { + wait_queue_head_t finished; + + void *priv; ++ ++ /* Detached buffer handling */ ++ bool cap_detached; ++ struct list_head det_list; ++ wait_queue_head_t det_empty; + }; + + /** +@@ -216,6 +224,45 @@ v4l2_m2m_buf_done(struct vb2_v4l2_buffer + } + + /** ++ * v4l2_m2m_cap_buf_detach() - detach the capture buffer from the job and ++ * return it. ++ * ++ * @m2m_dev: opaque pointer to the internal data to handle M2M context ++ * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx ++ * ++ * This function is designed to be used in conjunction with ++ * v4l2_m2m_buf_done_and_job_finish(). It allows the next job to start ++ * execution before the capture buffer is returned to the user which can be ++ * important if the underlying processing has multiple phases that are more ++ * efficiently executed in parallel. ++ * ++ * If used then it must be called before v4l2_m2m_buf_done_and_job_finish() ++ * as otherwise the buffer will have already gone. ++ * ++ * It is the callers reponsibilty to ensure that all detached buffers are ++ * returned. ++ */ ++struct vb2_v4l2_buffer *v4l2_m2m_cap_buf_detach(struct v4l2_m2m_dev *m2m_dev, ++ struct v4l2_m2m_ctx *m2m_ctx); ++ ++/** ++ * v4l2_m2m_cap_buf_return() - return a capture buffer, previously detached ++ * with v4l2_m2m_cap_buf_detach() to the user. ++ * ++ * @m2m_dev: opaque pointer to the internal data to handle M2M context ++ * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx ++ * @buf: the buffer to return ++ * @state: vb2 buffer state passed to v4l2_m2m_buf_done(). ++ * ++ * Buffers returned by this function will be returned to the user in the order ++ * of the original jobs rather than the order in which this function is called. ++ */ ++void v4l2_m2m_cap_buf_return(struct v4l2_m2m_dev *m2m_dev, ++ struct v4l2_m2m_ctx *m2m_ctx, ++ struct vb2_v4l2_buffer *buf, ++ enum vb2_buffer_state state); ++ ++/** + * v4l2_m2m_reqbufs() - multi-queue-aware REQBUFS multiplexer + * + * @file: pointer to struct &file +--- a/include/media/videobuf2-v4l2.h ++++ b/include/media/videobuf2-v4l2.h +@@ -35,6 +35,8 @@ + * @request_fd: the request_fd associated with this buffer + * @is_held: if true, then this capture buffer was held + * @planes: plane information (userptr/fd, length, bytesused, data_offset). ++ * @det_state: if a detached request capture buffer then this contains its ++ * current state + * + * Should contain enough information to be able to cover all the fields + * of &struct v4l2_buffer at ``videodev2.h``. +@@ -49,6 +51,7 @@ struct vb2_v4l2_buffer { + __s32 request_fd; + bool is_held; + struct vb2_plane planes[VB2_MAX_PLANES]; ++ enum vb2_buffer_state det_state; + }; + + /* VB2 V4L2 flags as set in vb2_queue.subsystem_flags */ diff --git a/target/linux/bcm27xx/patches-5.4/950-0512-media-dt-bindings-media-Add-binding-for-the-Raspberr.patch b/target/linux/bcm27xx/patches-5.4/950-0512-media-dt-bindings-media-Add-binding-for-the-Raspberr.patch new file mode 100644 index 0000000000..203e112466 --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0512-media-dt-bindings-media-Add-binding-for-the-Raspberr.patch @@ -0,0 +1,106 @@ +From 15b4e8fa2d5101b989856c42cdae6ec764c99db0 Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Tue, 17 Mar 2020 10:53:16 +0000 +Subject: [PATCH] media: dt-bindings: media: Add binding for the + Raspberry PI HEVC decoder + +Adds a binding for the HEVC decoder found on the BCM2711 / Raspberry Pi 4. + +Signed-off-by: Dave Stevenson +--- + .../bindings/media/rpivid_hevc.yaml | 72 +++++++++++++++++++ + MAINTAINERS | 7 ++ + 2 files changed, 79 insertions(+) + create mode 100644 Documentation/devicetree/bindings/media/rpivid_hevc.yaml + +--- /dev/null ++++ b/Documentation/devicetree/bindings/media/rpivid_hevc.yaml +@@ -0,0 +1,72 @@ ++# SPDX-License-Identifier: GPL-2.0-only ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/media/rpivid_hevc.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Raspberry Pi HEVC Decoder ++ ++maintainers: ++ - Raspberry Pi ++ ++description: |- ++ The Camera Adaptation Layer (CAL) is a key component for image capture ++ applications. The capture module provides the system interface and the ++ processing capability to connect CSI2 image-sensor modules to the ++ DRA72x device. ++ ++properties: ++ compatible: ++ enum: ++ - raspberrypi,rpivid-vid-decoder ++ ++ reg: ++ minItems: 2 ++ items: ++ - description: The HEVC main register region ++ - description: The Interrupt controller register region ++ ++ reg-names: ++ minItems: 2 ++ items: ++ - const: hevc ++ - const: intc ++ ++ interrupts: ++ maxItems: 1 ++ ++ clocks: ++ items: ++ - description: The HEVC block clock ++ ++ clock-names: ++ items: ++ - const: hevc ++ ++required: ++ - compatible ++ - reg ++ - reg-names ++ - interrupts ++ - clocks ++ ++additionalProperties: false ++ ++examples: ++ - | ++ #include ++ ++ video-codec@7eb10000 { ++ compatible = "raspberrypi,rpivid-vid-decoder"; ++ reg = <0x0 0x7eb10000 0x1000>, /* INTC */ ++ <0x0 0x7eb00000 0x10000>; /* HEVC */ ++ reg-names = "intc", ++ "hevc"; ++ ++ interrupts = ; ++ ++ clocks = <&clk 0>; ++ clock-names = "hevc"; ++ }; ++ ++... +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -3198,6 +3198,13 @@ N: bcm2711 + N: bcm2835 + F: drivers/staging/vc04_services + ++BROADCOM BCM2711 HEVC DECODER ++M: Raspberry Pi Kernel Maintenance ++L: linux-media@vger.kernel.org ++S: Maintained ++F: Documentation/devicetree/bindings/media/rpivid_hevc.jaml ++F: drivers/staging/media/rpivid ++ + BROADCOM BCM2835 CAMERA DRIVER + M: Dave Stevenson + L: linux-media@vger.kernel.org diff --git a/target/linux/bcm27xx/patches-5.4/950-0513-staging-media-Add-Raspberry-Pi-V4L2-H265-decoder.patch b/target/linux/bcm27xx/patches-5.4/950-0513-staging-media-Add-Raspberry-Pi-V4L2-H265-decoder.patch new file mode 100644 index 0000000000..134a685f0e --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0513-staging-media-Add-Raspberry-Pi-V4L2-H265-decoder.patch @@ -0,0 +1,4341 @@ +From 82bbd353e2dc364bf37e6f0b91890cb432b1a72f Mon Sep 17 00:00:00 2001 +From: John Cox +Date: Thu, 5 Mar 2020 18:30:41 +0000 +Subject: [PATCH] staging: media: Add Raspberry Pi V4L2 H265 decoder + +This driver is for the HEVC/H265 decoder block on the Raspberry +Pi 4, and conforms to the V4L2 stateless decoder API. + +Signed-off-by: John Cox +--- + drivers/staging/media/Kconfig | 2 + + drivers/staging/media/Makefile | 1 + + drivers/staging/media/rpivid/Kconfig | 16 + + drivers/staging/media/rpivid/Makefile | 5 + + drivers/staging/media/rpivid/rpivid.c | 432 ++++ + drivers/staging/media/rpivid/rpivid.h | 181 ++ + drivers/staging/media/rpivid/rpivid_dec.c | 79 + + drivers/staging/media/rpivid/rpivid_dec.h | 19 + + drivers/staging/media/rpivid/rpivid_h265.c | 2275 +++++++++++++++++++ + drivers/staging/media/rpivid/rpivid_hw.c | 321 +++ + drivers/staging/media/rpivid/rpivid_hw.h | 300 +++ + drivers/staging/media/rpivid/rpivid_video.c | 593 +++++ + drivers/staging/media/rpivid/rpivid_video.h | 30 + + 14 files changed, 4256 insertions(+) + create mode 100644 drivers/staging/media/rpivid/Kconfig + create mode 100644 drivers/staging/media/rpivid/Makefile + create mode 100644 drivers/staging/media/rpivid/rpivid.c + create mode 100644 drivers/staging/media/rpivid/rpivid.h + create mode 100644 drivers/staging/media/rpivid/rpivid_dec.c + create mode 100644 drivers/staging/media/rpivid/rpivid_dec.h + create mode 100644 drivers/staging/media/rpivid/rpivid_h265.c + create mode 100644 drivers/staging/media/rpivid/rpivid_hw.c + create mode 100644 drivers/staging/media/rpivid/rpivid_hw.h + create mode 100644 drivers/staging/media/rpivid/rpivid_video.c + create mode 100644 drivers/staging/media/rpivid/rpivid_video.h + +--- a/drivers/staging/media/Kconfig ++++ b/drivers/staging/media/Kconfig +@@ -30,6 +30,8 @@ source "drivers/staging/media/meson/vdec + + source "drivers/staging/media/omap4iss/Kconfig" + ++source "drivers/staging/media/rpivid/Kconfig" ++ + source "drivers/staging/media/sunxi/Kconfig" + + source "drivers/staging/media/tegra-vde/Kconfig" +--- a/drivers/staging/media/Makefile ++++ b/drivers/staging/media/Makefile +@@ -3,6 +3,7 @@ obj-$(CONFIG_VIDEO_ALLEGRO_DVT) += alleg + obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx/ + obj-$(CONFIG_VIDEO_MESON_VDEC) += meson/vdec/ + obj-$(CONFIG_VIDEO_OMAP4) += omap4iss/ ++obj-$(CONFIG_VIDEO_RPIVID) += rpivid/ + obj-$(CONFIG_VIDEO_SUNXI) += sunxi/ + obj-$(CONFIG_TEGRA_VDE) += tegra-vde/ + obj-$(CONFIG_VIDEO_HANTRO) += hantro/ +--- /dev/null ++++ b/drivers/staging/media/rpivid/Kconfig +@@ -0,0 +1,16 @@ ++# SPDX-License-Identifier: GPL-2.0 ++ ++config VIDEO_RPIVID ++ tristate "Rpi H265 driver" ++ depends on VIDEO_DEV && VIDEO_V4L2 ++ depends on MEDIA_CONTROLLER ++ depends on OF ++ depends on MEDIA_CONTROLLER_REQUEST_API ++ select VIDEOBUF2_DMA_CONTIG ++ select V4L2_MEM2MEM_DEV ++ help ++ Support for the Rpi H265 h/w decoder. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called rpivid-hevc. ++ +--- /dev/null ++++ b/drivers/staging/media/rpivid/Makefile +@@ -0,0 +1,5 @@ ++# SPDX-License-Identifier: GPL-2.0 ++obj-$(CONFIG_VIDEO_RPIVID) += rpivid-hevc.o ++ ++rpivid-hevc-y = rpivid.o rpivid_video.o rpivid_dec.o \ ++ rpivid_hw.o rpivid_h265.o +--- /dev/null ++++ b/drivers/staging/media/rpivid/rpivid.c +@@ -0,0 +1,432 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Raspberry Pi HEVC driver ++ * ++ * Copyright (C) 2020 Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Cedrus VPU driver, that is: ++ * ++ * Copyright (C) 2016 Florent Revest ++ * Copyright (C) 2018 Paul Kocialkowski ++ * Copyright (C) 2018 Bootlin ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "rpivid.h" ++#include "rpivid_video.h" ++#include "rpivid_hw.h" ++#include "rpivid_dec.h" ++ ++/* ++ * Default /dev/videoN node number. ++ * Deliberately avoid the very low numbers as these are often taken by webcams ++ * etc, and simple apps tend to only go for /dev/video0. ++ */ ++static int video_nr = 19; ++module_param(video_nr, int, 0644); ++MODULE_PARM_DESC(video_nr, "decoder video device number"); ++ ++static const struct rpivid_control rpivid_ctrls[] = { ++ { ++ .cfg = { ++ .id = V4L2_CID_MPEG_VIDEO_HEVC_SPS, ++ }, ++ .required = true, ++ }, ++ { ++ .cfg = { ++ .id = V4L2_CID_MPEG_VIDEO_HEVC_PPS, ++ }, ++ .required = true, ++ }, ++ { ++ .cfg = { ++ .id = V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX, ++ }, ++ .required = false, ++ }, ++ { ++ .cfg = { ++ .id = V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS, ++ }, ++ .required = true, ++ }, ++ { ++ .cfg = { ++ .id = V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE, ++ .max = V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED, ++ .def = V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED, ++ }, ++ .required = false, ++ }, ++ { ++ .cfg = { ++ .id = V4L2_CID_MPEG_VIDEO_HEVC_START_CODE, ++ .max = V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE, ++ .def = V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE, ++ }, ++ .required = false, ++ }, ++}; ++ ++#define rpivid_ctrls_COUNT ARRAY_SIZE(rpivid_ctrls) ++ ++void *rpivid_find_control_data(struct rpivid_ctx *ctx, u32 id) ++{ ++ unsigned int i; ++ ++ for (i = 0; ctx->ctrls[i]; i++) ++ if (ctx->ctrls[i]->id == id) ++ return ctx->ctrls[i]->p_cur.p; ++ ++ return NULL; ++} ++ ++static int rpivid_init_ctrls(struct rpivid_dev *dev, struct rpivid_ctx *ctx) ++{ ++ struct v4l2_ctrl_handler *hdl = &ctx->hdl; ++ struct v4l2_ctrl *ctrl; ++ unsigned int ctrl_size; ++ unsigned int i; ++ ++ v4l2_ctrl_handler_init(hdl, rpivid_ctrls_COUNT); ++ if (hdl->error) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to initialize control handler\n"); ++ return hdl->error; ++ } ++ ++ ctrl_size = sizeof(ctrl) * rpivid_ctrls_COUNT + 1; ++ ++ ctx->ctrls = kzalloc(ctrl_size, GFP_KERNEL); ++ if (!ctx->ctrls) ++ return -ENOMEM; ++ ++ for (i = 0; i < rpivid_ctrls_COUNT; i++) { ++ ctrl = v4l2_ctrl_new_custom(hdl, &rpivid_ctrls[i].cfg, ++ NULL); ++ if (hdl->error) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to create new custom control id=%#x\n", ++ rpivid_ctrls[i].cfg.id); ++ ++ v4l2_ctrl_handler_free(hdl); ++ kfree(ctx->ctrls); ++ return hdl->error; ++ } ++ ++ ctx->ctrls[i] = ctrl; ++ } ++ ++ ctx->fh.ctrl_handler = hdl; ++ v4l2_ctrl_handler_setup(hdl); ++ ++ return 0; ++} ++ ++static int rpivid_request_validate(struct media_request *req) ++{ ++ struct media_request_object *obj; ++ struct v4l2_ctrl_handler *parent_hdl, *hdl; ++ struct rpivid_ctx *ctx = NULL; ++ struct v4l2_ctrl *ctrl_test; ++ unsigned int count; ++ unsigned int i; ++ ++ list_for_each_entry(obj, &req->objects, list) { ++ struct vb2_buffer *vb; ++ ++ if (vb2_request_object_is_buffer(obj)) { ++ vb = container_of(obj, struct vb2_buffer, req_obj); ++ ctx = vb2_get_drv_priv(vb->vb2_queue); ++ ++ break; ++ } ++ } ++ ++ if (!ctx) ++ return -ENOENT; ++ ++ count = vb2_request_buffer_cnt(req); ++ if (!count) { ++ v4l2_info(&ctx->dev->v4l2_dev, ++ "No buffer was provided with the request\n"); ++ return -ENOENT; ++ } else if (count > 1) { ++ v4l2_info(&ctx->dev->v4l2_dev, ++ "More than one buffer was provided with the request\n"); ++ return -EINVAL; ++ } ++ ++ parent_hdl = &ctx->hdl; ++ ++ hdl = v4l2_ctrl_request_hdl_find(req, parent_hdl); ++ if (!hdl) { ++ v4l2_info(&ctx->dev->v4l2_dev, "Missing codec control(s)\n"); ++ return -ENOENT; ++ } ++ ++ for (i = 0; i < rpivid_ctrls_COUNT; i++) { ++ if (!rpivid_ctrls[i].required) ++ continue; ++ ++ ctrl_test = ++ v4l2_ctrl_request_hdl_ctrl_find(hdl, ++ rpivid_ctrls[i].cfg.id); ++ if (!ctrl_test) { ++ v4l2_info(&ctx->dev->v4l2_dev, ++ "Missing required codec control\n"); ++ return -ENOENT; ++ } ++ } ++ ++ v4l2_ctrl_request_hdl_put(hdl); ++ ++ return vb2_request_validate(req); ++} ++ ++static int rpivid_open(struct file *file) ++{ ++ struct rpivid_dev *dev = video_drvdata(file); ++ struct rpivid_ctx *ctx = NULL; ++ int ret; ++ ++ if (mutex_lock_interruptible(&dev->dev_mutex)) ++ return -ERESTARTSYS; ++ ++ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); ++ if (!ctx) { ++ mutex_unlock(&dev->dev_mutex); ++ return -ENOMEM; ++ } ++ ++ v4l2_fh_init(&ctx->fh, video_devdata(file)); ++ file->private_data = &ctx->fh; ++ ctx->dev = dev; ++ ++ ret = rpivid_init_ctrls(dev, ctx); ++ if (ret) ++ goto err_free; ++ ++ ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, ++ &rpivid_queue_init); ++ if (IS_ERR(ctx->fh.m2m_ctx)) { ++ ret = PTR_ERR(ctx->fh.m2m_ctx); ++ goto err_ctrls; ++ } ++ ++ /* The only bit of format info that we can guess now is H265 src ++ * Everything else we need more info for ++ */ ++ ctx->src_fmt.pixelformat = RPIVID_SRC_PIXELFORMAT_DEFAULT; ++ rpivid_prepare_src_format(&ctx->src_fmt); ++ ++ v4l2_fh_add(&ctx->fh); ++ ++ mutex_unlock(&dev->dev_mutex); ++ ++ return 0; ++ ++err_ctrls: ++ v4l2_ctrl_handler_free(&ctx->hdl); ++err_free: ++ kfree(ctx); ++ mutex_unlock(&dev->dev_mutex); ++ ++ return ret; ++} ++ ++static int rpivid_release(struct file *file) ++{ ++ struct rpivid_dev *dev = video_drvdata(file); ++ struct rpivid_ctx *ctx = container_of(file->private_data, ++ struct rpivid_ctx, fh); ++ ++ mutex_lock(&dev->dev_mutex); ++ ++ v4l2_fh_del(&ctx->fh); ++ v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); ++ ++ v4l2_ctrl_handler_free(&ctx->hdl); ++ kfree(ctx->ctrls); ++ ++ v4l2_fh_exit(&ctx->fh); ++ ++ kfree(ctx); ++ ++ mutex_unlock(&dev->dev_mutex); ++ ++ return 0; ++} ++ ++static const struct v4l2_file_operations rpivid_fops = { ++ .owner = THIS_MODULE, ++ .open = rpivid_open, ++ .release = rpivid_release, ++ .poll = v4l2_m2m_fop_poll, ++ .unlocked_ioctl = video_ioctl2, ++ .mmap = v4l2_m2m_fop_mmap, ++}; ++ ++static const struct video_device rpivid_video_device = { ++ .name = RPIVID_NAME, ++ .vfl_dir = VFL_DIR_M2M, ++ .fops = &rpivid_fops, ++ .ioctl_ops = &rpivid_ioctl_ops, ++ .minor = -1, ++ .release = video_device_release_empty, ++ .device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING, ++}; ++ ++static const struct v4l2_m2m_ops rpivid_m2m_ops = { ++ .device_run = rpivid_device_run, ++}; ++ ++static const struct media_device_ops rpivid_m2m_media_ops = { ++ .req_validate = rpivid_request_validate, ++ .req_queue = v4l2_m2m_request_queue, ++}; ++ ++static int rpivid_probe(struct platform_device *pdev) ++{ ++ struct rpivid_dev *dev; ++ struct video_device *vfd; ++ int ret; ++ ++ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL); ++ if (!dev) ++ return -ENOMEM; ++ ++ dev->vfd = rpivid_video_device; ++ dev->dev = &pdev->dev; ++ dev->pdev = pdev; ++ ++ ret = 0; ++ ret = rpivid_hw_probe(dev); ++ if (ret) { ++ dev_err(&pdev->dev, "Failed to probe hardware\n"); ++ return ret; ++ } ++ ++ dev->dec_ops = &rpivid_dec_ops_h265; ++ ++ mutex_init(&dev->dev_mutex); ++ ++ ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev); ++ if (ret) { ++ dev_err(&pdev->dev, "Failed to register V4L2 device\n"); ++ return ret; ++ } ++ ++ vfd = &dev->vfd; ++ vfd->lock = &dev->dev_mutex; ++ vfd->v4l2_dev = &dev->v4l2_dev; ++ ++ snprintf(vfd->name, sizeof(vfd->name), "%s", rpivid_video_device.name); ++ video_set_drvdata(vfd, dev); ++ ++ dev->m2m_dev = v4l2_m2m_init(&rpivid_m2m_ops); ++ if (IS_ERR(dev->m2m_dev)) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to initialize V4L2 M2M device\n"); ++ ret = PTR_ERR(dev->m2m_dev); ++ ++ goto err_v4l2; ++ } ++ ++ dev->mdev.dev = &pdev->dev; ++ strscpy(dev->mdev.model, RPIVID_NAME, sizeof(dev->mdev.model)); ++ strscpy(dev->mdev.bus_info, "platform:" RPIVID_NAME, ++ sizeof(dev->mdev.bus_info)); ++ ++ media_device_init(&dev->mdev); ++ dev->mdev.ops = &rpivid_m2m_media_ops; ++ dev->v4l2_dev.mdev = &dev->mdev; ++ ++ ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); ++ goto err_m2m; ++ } ++ ++ v4l2_info(&dev->v4l2_dev, ++ "Device registered as /dev/video%d\n", vfd->num); ++ ++ ret = v4l2_m2m_register_media_controller(dev->m2m_dev, vfd, ++ MEDIA_ENT_F_PROC_VIDEO_DECODER); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to initialize V4L2 M2M media controller\n"); ++ goto err_video; ++ } ++ ++ ret = media_device_register(&dev->mdev); ++ if (ret) { ++ v4l2_err(&dev->v4l2_dev, "Failed to register media device\n"); ++ goto err_m2m_mc; ++ } ++ ++ platform_set_drvdata(pdev, dev); ++ ++ return 0; ++ ++err_m2m_mc: ++ v4l2_m2m_unregister_media_controller(dev->m2m_dev); ++err_video: ++ video_unregister_device(&dev->vfd); ++err_m2m: ++ v4l2_m2m_release(dev->m2m_dev); ++err_v4l2: ++ v4l2_device_unregister(&dev->v4l2_dev); ++ ++ return ret; ++} ++ ++static int rpivid_remove(struct platform_device *pdev) ++{ ++ struct rpivid_dev *dev = platform_get_drvdata(pdev); ++ ++ if (media_devnode_is_registered(dev->mdev.devnode)) { ++ media_device_unregister(&dev->mdev); ++ v4l2_m2m_unregister_media_controller(dev->m2m_dev); ++ media_device_cleanup(&dev->mdev); ++ } ++ ++ v4l2_m2m_release(dev->m2m_dev); ++ video_unregister_device(&dev->vfd); ++ v4l2_device_unregister(&dev->v4l2_dev); ++ ++ rpivid_hw_remove(dev); ++ ++ return 0; ++} ++ ++static const struct of_device_id rpivid_dt_match[] = { ++ { ++ .compatible = "raspberrypi,rpivid-vid-decoder", ++ }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, rpivid_dt_match); ++ ++static struct platform_driver rpivid_driver = { ++ .probe = rpivid_probe, ++ .remove = rpivid_remove, ++ .driver = { ++ .name = RPIVID_NAME, ++ .of_match_table = of_match_ptr(rpivid_dt_match), ++ }, ++}; ++module_platform_driver(rpivid_driver); ++ ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("John Cox "); ++MODULE_DESCRIPTION("Raspberry Pi HEVC V4L2 driver"); +--- /dev/null ++++ b/drivers/staging/media/rpivid/rpivid.h +@@ -0,0 +1,181 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Raspberry Pi HEVC driver ++ * ++ * Copyright (C) 2020 Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Cedrus VPU driver, that is: ++ * ++ * Copyright (C) 2016 Florent Revest ++ * Copyright (C) 2018 Paul Kocialkowski ++ * Copyright (C) 2018 Bootlin ++ */ ++ ++#ifndef _RPIVID_H_ ++#define _RPIVID_H_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define OPT_DEBUG_POLL_IRQ 0 ++ ++#define RPIVID_NAME "rpivid" ++ ++#define RPIVID_CAPABILITY_UNTILED BIT(0) ++#define RPIVID_CAPABILITY_H265_DEC BIT(1) ++ ++#define RPIVID_QUIRK_NO_DMA_OFFSET BIT(0) ++ ++#define RPIVID_SRC_PIXELFORMAT_DEFAULT V4L2_PIX_FMT_HEVC_SLICE ++ ++enum rpivid_irq_status { ++ RPIVID_IRQ_NONE, ++ RPIVID_IRQ_ERROR, ++ RPIVID_IRQ_OK, ++}; ++ ++struct rpivid_control { ++ struct v4l2_ctrl_config cfg; ++ unsigned char required:1; ++}; ++ ++struct rpivid_h265_run { ++ const struct v4l2_ctrl_hevc_sps *sps; ++ const struct v4l2_ctrl_hevc_pps *pps; ++ const struct v4l2_ctrl_hevc_slice_params *slice_params; ++ const struct v4l2_ctrl_hevc_scaling_matrix *scaling_matrix; ++}; ++ ++struct rpivid_run { ++ struct vb2_v4l2_buffer *src; ++ struct vb2_v4l2_buffer *dst; ++ ++ struct rpivid_h265_run h265; ++}; ++ ++struct rpivid_buffer { ++ struct v4l2_m2m_buffer m2m_buf; ++}; ++ ++struct rpivid_dec_state; ++struct rpivid_dec_env; ++#define RPIVID_DEC_ENV_COUNT 3 ++ ++struct rpivid_gptr { ++ size_t size; ++ __u8 *ptr; ++ dma_addr_t addr; ++ unsigned long attrs; ++}; ++ ++struct rpivid_dev; ++typedef void (*rpivid_irq_callback)(struct rpivid_dev *dev, void *ctx); ++ ++struct rpivid_q_aux; ++#define RPIVID_AUX_ENT_COUNT VB2_MAX_FRAME ++ ++#define RPIVID_P2BUF_COUNT 2 ++ ++struct rpivid_ctx { ++ struct v4l2_fh fh; ++ struct rpivid_dev *dev; ++ ++ struct v4l2_pix_format src_fmt; ++ struct v4l2_pix_format dst_fmt; ++ int dst_fmt_set; ++ ++ struct v4l2_ctrl_handler hdl; ++ struct v4l2_ctrl **ctrls; ++ ++ /* Decode state - stateless decoder my *** */ ++ /* state contains stuff that is only needed in phase0 ++ * it could be held in dec_env but that would be wasteful ++ */ ++ struct rpivid_dec_state *state; ++ struct rpivid_dec_env *dec0; ++ ++ /* Spinlock protecting dec_free */ ++ spinlock_t dec_lock; ++ struct rpivid_dec_env *dec_free; ++ ++ struct rpivid_dec_env *dec_pool; ++ ++ /* Some of these should be in dev */ ++ struct rpivid_gptr bitbufs[1]; /* Will be 2 */ ++ struct rpivid_gptr cmdbufs[1]; /* Will be 2 */ ++ unsigned int p2idx; ++ atomic_t p2out; ++ struct rpivid_gptr pu_bufs[RPIVID_P2BUF_COUNT]; ++ struct rpivid_gptr coeff_bufs[RPIVID_P2BUF_COUNT]; ++ ++ /* Spinlock protecting aux_free */ ++ spinlock_t aux_lock; ++ struct rpivid_q_aux *aux_free; ++ ++ struct rpivid_q_aux *aux_ents[RPIVID_AUX_ENT_COUNT]; ++ ++ unsigned int colmv_stride; ++ unsigned int colmv_picsize; ++}; ++ ++struct rpivid_dec_ops { ++ void (*setup)(struct rpivid_ctx *ctx, struct rpivid_run *run); ++ int (*start)(struct rpivid_ctx *ctx); ++ void (*stop)(struct rpivid_ctx *ctx); ++ void (*trigger)(struct rpivid_ctx *ctx); ++}; ++ ++struct rpivid_variant { ++ unsigned int capabilities; ++ unsigned int quirks; ++ unsigned int mod_rate; ++}; ++ ++struct rpivid_hw_irq_ent; ++ ++struct rpivid_hw_irq_ctrl { ++ /* Spinlock protecting claim and tail */ ++ spinlock_t lock; ++ struct rpivid_hw_irq_ent *claim; ++ struct rpivid_hw_irq_ent *tail; ++ ++ /* Ent for pending irq - also prevents sched */ ++ struct rpivid_hw_irq_ent *irq; ++ /* Non-zero => do not start a new job - outer layer sched pending */ ++ int no_sched; ++ /* Thread CB requested */ ++ bool thread_reqed; ++}; ++ ++struct rpivid_dev { ++ struct v4l2_device v4l2_dev; ++ struct video_device vfd; ++ struct media_device mdev; ++ struct media_pad pad[2]; ++ struct platform_device *pdev; ++ struct device *dev; ++ struct v4l2_m2m_dev *m2m_dev; ++ struct rpivid_dec_ops *dec_ops; ++ ++ /* Device file mutex */ ++ struct mutex dev_mutex; ++ ++ void __iomem *base_irq; ++ void __iomem *base_h265; ++ ++ struct clk *clock; ++ ++ struct rpivid_hw_irq_ctrl ic_active1; ++ struct rpivid_hw_irq_ctrl ic_active2; ++}; ++ ++extern struct rpivid_dec_ops rpivid_dec_ops_h265; ++ ++void *rpivid_find_control_data(struct rpivid_ctx *ctx, u32 id); ++ ++#endif +--- /dev/null ++++ b/drivers/staging/media/rpivid/rpivid_dec.c +@@ -0,0 +1,79 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Raspberry Pi HEVC driver ++ * ++ * Copyright (C) 2020 Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Cedrus VPU driver, that is: ++ * ++ * Copyright (C) 2016 Florent Revest ++ * Copyright (C) 2018 Paul Kocialkowski ++ * Copyright (C) 2018 Bootlin ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include "rpivid.h" ++#include "rpivid_dec.h" ++ ++void rpivid_device_run(void *priv) ++{ ++ struct rpivid_ctx *ctx = priv; ++ struct rpivid_dev *dev = ctx->dev; ++ struct rpivid_run run = {}; ++ struct media_request *src_req; ++ ++ run.src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx); ++ run.dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx); ++ ++ if (!run.src || !run.dst) { ++ v4l2_err(&dev->v4l2_dev, "%s: Missing buffer: src=%p, dst=%p\n", ++ __func__, run.src, run.dst); ++ /* We are stuffed - this probably won't dig us out of our ++ * current situation but it is better than nothing ++ */ ++ v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx, ++ VB2_BUF_STATE_ERROR); ++ return; ++ } ++ ++ /* Apply request(s) controls if needed. */ ++ src_req = run.src->vb2_buf.req_obj.req; ++ ++ if (src_req) ++ v4l2_ctrl_request_setup(src_req, &ctx->hdl); ++ ++ switch (ctx->src_fmt.pixelformat) { ++ case V4L2_PIX_FMT_HEVC_SLICE: ++ run.h265.sps = ++ rpivid_find_control_data(ctx, ++ V4L2_CID_MPEG_VIDEO_HEVC_SPS); ++ run.h265.pps = ++ rpivid_find_control_data(ctx, ++ V4L2_CID_MPEG_VIDEO_HEVC_PPS); ++ run.h265.slice_params = ++ rpivid_find_control_data(ctx, ++ V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS); ++ run.h265.scaling_matrix = ++ rpivid_find_control_data(ctx, ++ V4L2_CID_MPEG_VIDEO_HEVC_SCALING_MATRIX); ++ break; ++ ++ default: ++ break; ++ } ++ ++ v4l2_m2m_buf_copy_metadata(run.src, run.dst, true); ++ ++ dev->dec_ops->setup(ctx, &run); ++ ++ /* Complete request(s) controls if needed. */ ++ ++ if (src_req) ++ v4l2_ctrl_request_complete(src_req, &ctx->hdl); ++ ++ dev->dec_ops->trigger(ctx); ++} +--- /dev/null ++++ b/drivers/staging/media/rpivid/rpivid_dec.h +@@ -0,0 +1,19 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Raspberry Pi HEVC driver ++ * ++ * Copyright (C) 2020 Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Cedrus VPU driver, that is: ++ * ++ * Copyright (C) 2016 Florent Revest ++ * Copyright (C) 2018 Paul Kocialkowski ++ * Copyright (C) 2018 Bootlin ++ */ ++ ++#ifndef _RPIVID_DEC_H_ ++#define _RPIVID_DEC_H_ ++ ++void rpivid_device_run(void *priv); ++ ++#endif +--- /dev/null ++++ b/drivers/staging/media/rpivid/rpivid_h265.c +@@ -0,0 +1,2275 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++/* ++ * Raspberry Pi HEVC driver ++ * ++ * Copyright (C) 2020 Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Cedrus VPU driver, that is: ++ * ++ * Copyright (C) 2016 Florent Revest ++ * Copyright (C) 2018 Paul Kocialkowski ++ * Copyright (C) 2018 Bootlin ++ */ ++ ++#include ++#include ++ ++#include ++ ++#include "rpivid.h" ++#include "rpivid_hw.h" ++ ++#define DEBUG_TRACE_P1_CMD 0 ++#define DEBUG_TRACE_EXECUTION 0 ++ ++#if DEBUG_TRACE_EXECUTION ++#define xtrace_in(dev_, de_)\ ++ v4l2_info(&(dev_)->v4l2_dev, "%s[%d]: in\n", __func__,\ ++ (de_) == NULL ? -1 : (de_)->decode_order) ++#define xtrace_ok(dev_, de_)\ ++ v4l2_info(&(dev_)->v4l2_dev, "%s[%d]: ok\n", __func__,\ ++ (de_) == NULL ? -1 : (de_)->decode_order) ++#define xtrace_fin(dev_, de_)\ ++ v4l2_info(&(dev_)->v4l2_dev, "%s[%d]: finish\n", __func__,\ ++ (de_) == NULL ? -1 : (de_)->decode_order) ++#define xtrace_fail(dev_, de_)\ ++ v4l2_info(&(dev_)->v4l2_dev, "%s[%d]: FAIL\n", __func__,\ ++ (de_) == NULL ? -1 : (de_)->decode_order) ++#else ++#define xtrace_in(dev_, de_) ++#define xtrace_ok(dev_, de_) ++#define xtrace_fin(dev_, de_) ++#define xtrace_fail(dev_, de_) ++#endif ++ ++enum hevc_slice_type { ++ HEVC_SLICE_B = 0, ++ HEVC_SLICE_P = 1, ++ HEVC_SLICE_I = 2, ++}; ++ ++enum hevc_layer { L0 = 0, L1 = 1 }; ++ ++static int gptr_alloc(struct rpivid_dev *const dev, struct rpivid_gptr *gptr, ++ size_t size, unsigned long attrs) ++{ ++ gptr->size = size; ++ gptr->attrs = attrs; ++ gptr->addr = 0; ++ gptr->ptr = dma_alloc_attrs(dev->dev, gptr->size, &gptr->addr, ++ GFP_KERNEL, gptr->attrs); ++ return !gptr->ptr ? -ENOMEM : 0; ++} ++ ++static void gptr_free(struct rpivid_dev *const dev, ++ struct rpivid_gptr *const gptr) ++{ ++ if (gptr->ptr) ++ dma_free_attrs(dev->dev, gptr->size, gptr->ptr, gptr->addr, ++ gptr->attrs); ++ gptr->size = 0; ++ gptr->ptr = NULL; ++ gptr->addr = 0; ++ gptr->attrs = 0; ++} ++ ++/* Realloc but do not copy */ ++static int gptr_realloc_new(struct rpivid_dev * const dev, ++ struct rpivid_gptr * const gptr, size_t size) ++{ ++ if (size == gptr->size) ++ return 0; ++ ++ if (gptr->ptr) ++ dma_free_attrs(dev->dev, gptr->size, gptr->ptr, ++ gptr->addr, gptr->attrs); ++ ++ gptr->addr = 0; ++ gptr->size = size; ++ gptr->ptr = dma_alloc_attrs(dev->dev, gptr->size, ++ &gptr->addr, GFP_KERNEL, gptr->attrs); ++ return gptr->ptr ? 0 : -ENOMEM; ++} ++ ++/* floor(log2(x)) */ ++static unsigned int log2_size(size_t x) ++{ ++ unsigned int n = 0; ++ ++ if (x & ~0xffff) { ++ n += 16; ++ x >>= 16; ++ } ++ if (x & ~0xff) { ++ n += 8; ++ x >>= 8; ++ } ++ if (x & ~0xf) { ++ n += 4; ++ x >>= 4; ++ } ++ if (x & ~3) { ++ n += 2; ++ x >>= 2; ++ } ++ return (x & ~1) ? n + 1 : n; ++} ++ ++static size_t round_up_size(const size_t x) ++{ ++ /* Admit no size < 256 */ ++ const unsigned int n = x < 256 ? 8 : log2_size(x) - 1; ++ ++ return x >= (3 << n) ? 4 << n : (3 << n); ++} ++ ++static size_t next_size(const size_t x) ++{ ++ return round_up_size(x + 1); ++} ++ ++#define NUM_SCALING_FACTORS 4064 /* Not a typo = 0xbe0 + 0x400 */ ++ ++#define AXI_BASE64 0 ++ ++#define PROB_BACKUP ((20 << 12) + (20 << 6) + (0 << 0)) ++#define PROB_RELOAD ((20 << 12) + (20 << 0) + (0 << 6)) ++ ++#define HEVC_MAX_REFS V4L2_HEVC_DPB_ENTRIES_NUM_MAX ++ ++////////////////////////////////////////////////////////////////////////////// ++ ++struct rpi_cmd { ++ u32 addr; ++ u32 data; ++} __packed; ++ ++struct rpivid_q_aux { ++ unsigned int refcount; ++ unsigned int q_index; ++ struct rpivid_q_aux *next; ++ struct rpivid_gptr col; ++}; ++ ++////////////////////////////////////////////////////////////////////////////// ++ ++enum rpivid_decode_state { ++ RPIVID_DECODE_SLICE_START, ++ RPIVID_DECODE_SLICE_CONTINUE, ++ RPIVID_DECODE_ERROR_CONTINUE, ++ RPIVID_DECODE_ERROR_DONE, ++ RPIVID_DECODE_PHASE1, ++ RPIVID_DECODE_END, ++}; ++ ++struct rpivid_dec_env { ++ struct rpivid_ctx *ctx; ++ struct rpivid_dec_env *next; ++ ++ enum rpivid_decode_state state; ++ unsigned int decode_order; ++ int p1_status; /* P1 status - what to realloc */ ++ ++ struct rpivid_dec_env *phase_wait_q_next; ++ ++ struct rpi_cmd *cmd_fifo; ++ unsigned int cmd_len, cmd_max; ++ unsigned int num_slice_msgs; ++ unsigned int pic_width_in_ctbs_y; ++ unsigned int pic_height_in_ctbs_y; ++ unsigned int dpbno_col; ++ u32 reg_slicestart; ++ int collocated_from_l0_flag; ++ unsigned int wpp_entry_x; ++ unsigned int wpp_entry_y; ++ ++ u32 rpi_config2; ++ u32 rpi_framesize; ++ u32 rpi_currpoc; ++ ++ struct vb2_v4l2_buffer *frame_buf; // Detached dest buffer ++ unsigned int frame_c_offset; ++ unsigned int frame_stride; ++ dma_addr_t frame_addr; ++ dma_addr_t ref_addrs[16]; ++ struct rpivid_q_aux *frame_aux; ++ struct rpivid_q_aux *col_aux; ++ ++ dma_addr_t pu_base_vc; ++ dma_addr_t coeff_base_vc; ++ u32 pu_stride; ++ u32 coeff_stride; ++ ++ struct rpivid_gptr *bit_copy_gptr; ++ size_t bit_copy_len; ++ struct rpivid_gptr *cmd_copy_gptr; ++ ++ u16 slice_msgs[2 * HEVC_MAX_REFS * 8 + 3]; ++ u8 scaling_factors[NUM_SCALING_FACTORS]; ++ ++ struct rpivid_hw_irq_ent irq_ent; ++}; ++ ++#define member_size(type, member) sizeof(((type *)0)->member) ++ ++struct rpivid_dec_state { ++ struct v4l2_ctrl_hevc_sps sps; ++ struct v4l2_ctrl_hevc_pps pps; ++ ++ // Helper vars & tables derived from sps/pps ++ unsigned int log2_ctb_size; /* log2 width of a CTB */ ++ unsigned int ctb_width; /* Width in CTBs */ ++ unsigned int ctb_height; /* Height in CTBs */ ++ unsigned int ctb_size; /* Pic area in CTBs */ ++ unsigned int num_tile_columns; ++ unsigned int num_tile_rows; ++ u8 column_width[member_size(struct v4l2_ctrl_hevc_pps, ++ column_width_minus1)]; ++ u8 row_height[member_size(struct v4l2_ctrl_hevc_pps, ++ row_height_minus1)]; ++ ++ int *col_bd; ++ int *row_bd; ++ int *ctb_addr_rs_to_ts; ++ int *ctb_addr_ts_to_rs; ++ int *tile_id; ++ ++ // Aux starage for DPB ++ // Hold refs ++ struct rpivid_q_aux *ref_aux[HEVC_MAX_REFS]; ++ struct rpivid_q_aux *frame_aux; ++ ++ // Slice vars ++ unsigned int slice_idx; ++ bool frame_end; ++ bool slice_temporal_mvp; /* Slice flag but constant for frame */ ++ ++ // Temp vars per run - don't actually need to persist ++ u8 *src_buf; ++ dma_addr_t src_addr; ++ const struct v4l2_ctrl_hevc_slice_params *sh; ++ unsigned int nb_refs[2]; ++ unsigned int slice_qp; ++ unsigned int max_num_merge_cand; // 0 if I-slice ++ bool dependent_slice_segment_flag; ++}; ++ ++static inline int clip_int(const int x, const int lo, const int hi) ++{ ++ return x < lo ? lo : x > hi ? hi : x; ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++// Phase 1 command and bit FIFOs ++ ++#if DEBUG_TRACE_P1_CMD ++static int p1_z; ++#endif ++ ++// ???? u16 addr - put in u32 ++static int p1_apb_write(struct rpivid_dec_env *const de, const u16 addr, ++ const u32 data) ++{ ++ if (de->cmd_len == de->cmd_max) ++ de->cmd_fifo = ++ krealloc(de->cmd_fifo, ++ (de->cmd_max *= 2) * sizeof(struct rpi_cmd), ++ GFP_KERNEL); ++ de->cmd_fifo[de->cmd_len].addr = addr; ++ de->cmd_fifo[de->cmd_len].data = data; ++ ++#if DEBUG_TRACE_P1_CMD ++ if (++p1_z < 256) { ++ v4l2_info(&de->ctx->dev->v4l2_dev, "[%02x] %x %x\n", ++ de->cmd_len, addr, data); ++ } ++#endif ++ ++ return de->cmd_len++; ++} ++ ++static int ctb_to_tile(unsigned int ctb, unsigned int *bd, int num) ++{ ++ int i; ++ ++ for (i = 1; ctb >= bd[i]; i++) ++ ; // bd[] has num+1 elements; bd[0]=0; ++ return i - 1; ++} ++ ++static int ctb_to_slice_w_h(unsigned int ctb, int ctb_size, int width, ++ unsigned int *bd, int num) ++{ ++ if (ctb < bd[num - 1]) ++ return ctb_size; ++ else if (width % ctb_size) ++ return width % ctb_size; ++ else ++ return ctb_size; ++} ++ ++static void aux_q_free(struct rpivid_ctx *const ctx, ++ struct rpivid_q_aux *const aq) ++{ ++ struct rpivid_dev *const dev = ctx->dev; ++ ++ gptr_free(dev, &aq->col); ++ kfree(aq); ++} ++ ++static struct rpivid_q_aux *aux_q_alloc(struct rpivid_ctx *const ctx) ++{ ++ struct rpivid_dev *const dev = ctx->dev; ++ struct rpivid_q_aux *const aq = kzalloc(sizeof(*aq), GFP_KERNEL); ++ ++ if (!aq) ++ return NULL; ++ ++ aq->refcount = 1; ++ if (gptr_alloc(dev, &aq->col, ctx->colmv_picsize, ++ DMA_ATTR_FORCE_CONTIGUOUS | DMA_ATTR_NO_KERNEL_MAPPING)) ++ goto fail; ++ ++ return aq; ++ ++fail: ++ kfree(aq); ++ return NULL; ++} ++ ++static struct rpivid_q_aux *aux_q_new(struct rpivid_ctx *const ctx, ++ const unsigned int q_index) ++{ ++ struct rpivid_q_aux *aq; ++ unsigned long lockflags; ++ ++ spin_lock_irqsave(&ctx->aux_lock, lockflags); ++ aq = ctx->aux_free; ++ if (aq) { ++ ctx->aux_free = aq->next; ++ aq->next = NULL; ++ aq->refcount = 1; ++ } ++ spin_unlock_irqrestore(&ctx->aux_lock, lockflags); ++ ++ if (!aq) { ++ aq = aux_q_alloc(ctx); ++ if (!aq) ++ return NULL; ++ } ++ ++ aq->q_index = q_index; ++ ctx->aux_ents[q_index] = aq; ++ return aq; ++} ++ ++static struct rpivid_q_aux *aux_q_ref(struct rpivid_ctx *const ctx, ++ struct rpivid_q_aux *const aq) ++{ ++ if (aq) { ++ unsigned long lockflags; ++ ++ spin_lock_irqsave(&ctx->aux_lock, lockflags); ++ ++ ++aq->refcount; ++ ++ spin_unlock_irqrestore(&ctx->aux_lock, lockflags); ++ } ++ return aq; ++} ++ ++static void aux_q_release(struct rpivid_ctx *const ctx, ++ struct rpivid_q_aux **const paq) ++{ ++ struct rpivid_q_aux *const aq = *paq; ++ *paq = NULL; ++ ++ if (aq) { ++ unsigned long lockflags; ++ ++ spin_lock_irqsave(&ctx->aux_lock, lockflags); ++ ++ if (--aq->refcount == 0) { ++ aq->next = ctx->aux_free; ++ ctx->aux_free = aq; ++ ctx->aux_ents[aq->q_index] = NULL; ++ } ++ ++ spin_unlock_irqrestore(&ctx->aux_lock, lockflags); ++ } ++} ++ ++static void aux_q_init(struct rpivid_ctx *const ctx) ++{ ++ spin_lock_init(&ctx->aux_lock); ++ ctx->aux_free = NULL; ++} ++ ++static void aux_q_uninit(struct rpivid_ctx *const ctx) ++{ ++ struct rpivid_q_aux *aq; ++ ++ ctx->colmv_picsize = 0; ++ ctx->colmv_stride = 0; ++ while ((aq = ctx->aux_free) != NULL) { ++ ctx->aux_free = aq->next; ++ aux_q_free(ctx, aq); ++ } ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++ ++/* ++ * Initialisation process for context variables (CABAC init) ++ * see H.265 9.3.2.2 ++ * ++ * N.B. If comparing with FFmpeg note that this h/w uses slightly different ++ * offsets to FFmpegs array ++ */ ++ ++/* Actual number of values */ ++#define RPI_PROB_VALS 154U ++/* Rounded up as we copy words */ ++#define RPI_PROB_ARRAY_SIZE ((154 + 3) & ~3) ++ ++/* Initialiser values - see tables H.265 9-4 through 9-42 */ ++static const u8 prob_init[3][156] = { ++ { ++ 153, 200, 139, 141, 157, 154, 154, 154, 154, 154, 184, 154, 154, ++ 154, 184, 63, 154, 154, 154, 154, 154, 154, 154, 154, 154, 154, ++ 154, 154, 154, 153, 138, 138, 111, 141, 94, 138, 182, 154, 154, ++ 154, 140, 92, 137, 138, 140, 152, 138, 139, 153, 74, 149, 92, ++ 139, 107, 122, 152, 140, 179, 166, 182, 140, 227, 122, 197, 110, ++ 110, 124, 125, 140, 153, 125, 127, 140, 109, 111, 143, 127, 111, ++ 79, 108, 123, 63, 110, 110, 124, 125, 140, 153, 125, 127, 140, ++ 109, 111, 143, 127, 111, 79, 108, 123, 63, 91, 171, 134, 141, ++ 138, 153, 136, 167, 152, 152, 139, 139, 111, 111, 125, 110, 110, ++ 94, 124, 108, 124, 107, 125, 141, 179, 153, 125, 107, 125, 141, ++ 179, 153, 125, 107, 125, 141, 179, 153, 125, 140, 139, 182, 182, ++ 152, 136, 152, 136, 153, 136, 139, 111, 136, 139, 111, 0, 0, ++ }, ++ { ++ 153, 185, 107, 139, 126, 197, 185, 201, 154, 149, 154, 139, 154, ++ 154, 154, 152, 110, 122, 95, 79, 63, 31, 31, 153, 153, 168, ++ 140, 198, 79, 124, 138, 94, 153, 111, 149, 107, 167, 154, 154, ++ 154, 154, 196, 196, 167, 154, 152, 167, 182, 182, 134, 149, 136, ++ 153, 121, 136, 137, 169, 194, 166, 167, 154, 167, 137, 182, 125, ++ 110, 94, 110, 95, 79, 125, 111, 110, 78, 110, 111, 111, 95, ++ 94, 108, 123, 108, 125, 110, 94, 110, 95, 79, 125, 111, 110, ++ 78, 110, 111, 111, 95, 94, 108, 123, 108, 121, 140, 61, 154, ++ 107, 167, 91, 122, 107, 167, 139, 139, 155, 154, 139, 153, 139, ++ 123, 123, 63, 153, 166, 183, 140, 136, 153, 154, 166, 183, 140, ++ 136, 153, 154, 166, 183, 140, 136, 153, 154, 170, 153, 123, 123, ++ 107, 121, 107, 121, 167, 151, 183, 140, 151, 183, 140, 0, 0, ++ }, ++ { ++ 153, 160, 107, 139, 126, 197, 185, 201, 154, 134, 154, 139, 154, ++ 154, 183, 152, 154, 137, 95, 79, 63, 31, 31, 153, 153, 168, ++ 169, 198, 79, 224, 167, 122, 153, 111, 149, 92, 167, 154, 154, ++ 154, 154, 196, 167, 167, 154, 152, 167, 182, 182, 134, 149, 136, ++ 153, 121, 136, 122, 169, 208, 166, 167, 154, 152, 167, 182, 125, ++ 110, 124, 110, 95, 94, 125, 111, 111, 79, 125, 126, 111, 111, ++ 79, 108, 123, 93, 125, 110, 124, 110, 95, 94, 125, 111, 111, ++ 79, 125, 126, 111, 111, 79, 108, 123, 93, 121, 140, 61, 154, ++ 107, 167, 91, 107, 107, 167, 139, 139, 170, 154, 139, 153, 139, ++ 123, 123, 63, 124, 166, 183, 140, 136, 153, 154, 166, 183, 140, ++ 136, 153, 154, 166, 183, 140, 136, 153, 154, 170, 153, 138, 138, ++ 122, 121, 122, 121, 167, 151, 183, 140, 151, 183, 140, 0, 0, ++ }, ++}; ++ ++static void write_prob(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s) ++{ ++ u8 dst[RPI_PROB_ARRAY_SIZE]; ++ ++ const unsigned int init_type = ++ ((s->sh->flags & V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT) != 0 && ++ s->sh->slice_type != HEVC_SLICE_I) ? ++ s->sh->slice_type + 1 : ++ 2 - s->sh->slice_type; ++ const u8 *p = prob_init[init_type]; ++ const int q = clip_int(s->slice_qp, 0, 51); ++ unsigned int i; ++ ++ for (i = 0; i < RPI_PROB_VALS; i++) { ++ int init_value = p[i]; ++ int m = (init_value >> 4) * 5 - 45; ++ int n = ((init_value & 15) << 3) - 16; ++ int pre = 2 * (((m * q) >> 4) + n) - 127; ++ ++ pre ^= pre >> 31; ++ if (pre > 124) ++ pre = 124 + (pre & 1); ++ dst[i] = pre; ++ } ++ for (i = RPI_PROB_VALS; i != RPI_PROB_ARRAY_SIZE; ++i) ++ dst[i] = 0; ++ ++ for (i = 0; i < RPI_PROB_ARRAY_SIZE; i += 4) ++ p1_apb_write(de, 0x1000 + i, ++ dst[i] + (dst[i + 1] << 8) + (dst[i + 2] << 16) + ++ (dst[i + 3] << 24)); ++} ++ ++static void write_scaling_factors(struct rpivid_dec_env *const de) ++{ ++ int i; ++ const u8 *p = (u8 *)de->scaling_factors; ++ ++ for (i = 0; i < NUM_SCALING_FACTORS; i += 4, p += 4) ++ p1_apb_write(de, 0x2000 + i, ++ p[0] + (p[1] << 8) + (p[2] << 16) + (p[3] << 24)); ++} ++ ++static inline __u32 dma_to_axi_addr(dma_addr_t a) ++{ ++ return (__u32)(a >> 6); ++} ++ ++static void write_bitstream(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s) ++{ ++ // Note that FFmpeg removes emulation prevention bytes, so this is ++ // matched in the configuration here. ++ // Whether that is the correct behaviour or not is not clear in the ++ // spec. ++ const int rpi_use_emu = 1; ++ unsigned int offset = s->sh->data_bit_offset / 8 + 1; ++ const unsigned int len = (s->sh->bit_size + 7) / 8 - offset; ++ dma_addr_t addr; ++ ++ if (s->src_addr != 0) { ++ addr = s->src_addr + offset; ++ } else { ++ memcpy(de->bit_copy_gptr->ptr + de->bit_copy_len, ++ s->src_buf + offset, len); ++ addr = de->bit_copy_gptr->addr + de->bit_copy_len; ++ de->bit_copy_len += (len + 63) & ~63; ++ } ++ offset = addr & 63; ++ ++ p1_apb_write(de, RPI_BFBASE, dma_to_axi_addr(addr)); ++ p1_apb_write(de, RPI_BFNUM, len); ++ p1_apb_write(de, RPI_BFCONTROL, offset + (1 << 7)); // Stop ++ p1_apb_write(de, RPI_BFCONTROL, offset + (rpi_use_emu << 6)); ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++ ++static void write_slice(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s, ++ const unsigned int slice_w, ++ const unsigned int slice_h) ++{ ++ u32 u32 = (s->sh->slice_type << 12) + ++ (((s->sh->flags & ++ V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA) != 0) ++ << 14) + ++ (((s->sh->flags & ++ V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA) != 0) ++ << 15) + ++ (slice_w << 17) + (slice_h << 24); ++ ++ u32 |= (s->max_num_merge_cand << 0) + (s->nb_refs[L0] << 4) + ++ (s->nb_refs[L1] << 8); ++ ++ if (s->sh->slice_type == HEVC_SLICE_B) ++ u32 |= ((s->sh->flags & ++ V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO) != 0) ++ << 16; ++ p1_apb_write(de, RPI_SLICE, u32); ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++// Tiles mode ++ ++static void new_entry_point(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s, ++ const int do_bte, ++ const int reset_qp_y, const int ctb_addr_ts) ++{ ++ int ctb_col = s->ctb_addr_ts_to_rs[ctb_addr_ts] % ++ de->pic_width_in_ctbs_y; ++ int ctb_row = s->ctb_addr_ts_to_rs[ctb_addr_ts] / ++ de->pic_width_in_ctbs_y; ++ ++ int tile_x = ctb_to_tile(ctb_col, s->col_bd, s->num_tile_columns); ++ int tile_y = ctb_to_tile(ctb_row, s->row_bd, s->num_tile_rows); ++ ++ int endx = s->col_bd[tile_x + 1] - 1; ++ int endy = s->row_bd[tile_y + 1] - 1; ++ ++ u8 slice_w = ctb_to_slice_w_h(ctb_col, 1 << s->log2_ctb_size, ++ s->sps.pic_width_in_luma_samples, ++ s->col_bd, s->num_tile_columns); ++ u8 slice_h = ctb_to_slice_w_h(ctb_row, 1 << s->log2_ctb_size, ++ s->sps.pic_height_in_luma_samples, ++ s->row_bd, s->num_tile_rows); ++ ++ p1_apb_write(de, RPI_TILESTART, ++ s->col_bd[tile_x] + (s->row_bd[tile_y] << 16)); ++ p1_apb_write(de, RPI_TILEEND, endx + (endy << 16)); ++ ++ if (do_bte) ++ p1_apb_write(de, RPI_BEGINTILEEND, endx + (endy << 16)); ++ ++ write_slice(de, s, slice_w, slice_h); ++ ++ if (reset_qp_y) { ++ unsigned int sps_qp_bd_offset = ++ 6 * s->sps.bit_depth_luma_minus8; ++ ++ p1_apb_write(de, RPI_QP, sps_qp_bd_offset + s->slice_qp); ++ } ++ ++ p1_apb_write(de, RPI_MODE, ++ (0xFFFF << 0) + (0x0 << 16) + ++ ((tile_x == s->num_tile_columns - 1) << 17) + ++ ((tile_y == s->num_tile_rows - 1) << 18)); ++ ++ p1_apb_write(de, RPI_CONTROL, (ctb_col << 0) + (ctb_row << 16)); ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++ ++static void new_slice_segment(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s) ++{ ++ const struct v4l2_ctrl_hevc_sps *const sps = &s->sps; ++ const struct v4l2_ctrl_hevc_pps *const pps = &s->pps; ++ ++ p1_apb_write(de, ++ RPI_SPS0, ++ ((sps->log2_min_luma_coding_block_size_minus3 + 3) << 0) | ++ (s->log2_ctb_size << 4) | ++ ((sps->log2_min_luma_transform_block_size_minus2 + 2) ++ << 8) | ++ ((sps->log2_min_luma_transform_block_size_minus2 + 2 + ++ sps->log2_diff_max_min_luma_transform_block_size) ++ << 12) | ++ ((sps->bit_depth_luma_minus8 + 8) << 16) | ++ ((sps->bit_depth_chroma_minus8 + 8) << 20) | ++ (sps->max_transform_hierarchy_depth_intra << 24) | ++ (sps->max_transform_hierarchy_depth_inter << 28)); ++ ++ p1_apb_write(de, ++ RPI_SPS1, ++ ((sps->pcm_sample_bit_depth_luma_minus1 + 1) << 0) | ++ ((sps->pcm_sample_bit_depth_chroma_minus1 + 1) << 4) | ++ ((sps->log2_min_pcm_luma_coding_block_size_minus3 + 3) ++ << 8) | ++ ((sps->log2_min_pcm_luma_coding_block_size_minus3 + 3 + ++ sps->log2_diff_max_min_pcm_luma_coding_block_size) ++ << 12) | ++ (((sps->flags & V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE) ? ++ 0 : sps->chroma_format_idc) << 16) | ++ ((!!(sps->flags & V4L2_HEVC_SPS_FLAG_AMP_ENABLED)) << 18) | ++ ((!!(sps->flags & V4L2_HEVC_SPS_FLAG_PCM_ENABLED)) << 19) | ++ ((!!(sps->flags & V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED)) ++ << 20) | ++ ((!!(sps->flags & ++ V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED)) ++ << 21)); ++ ++ p1_apb_write(de, ++ RPI_PPS, ++ ((s->log2_ctb_size - pps->diff_cu_qp_delta_depth) << 0) | ++ ((!!(pps->flags & V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED)) ++ << 4) | ++ ((!!(pps->flags & ++ V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED)) ++ << 5) | ++ ((!!(pps->flags & V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED)) ++ << 6) | ++ ((!!(pps->flags & ++ V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED)) ++ << 7) | ++ (((pps->pps_cb_qp_offset + s->sh->slice_cb_qp_offset) & 255) ++ << 8) | ++ (((pps->pps_cr_qp_offset + s->sh->slice_cr_qp_offset) & 255) ++ << 16) | ++ ((!!(pps->flags & ++ V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED)) ++ << 24)); ++ ++ if ((sps->flags & V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED) != 0) ++ write_scaling_factors(de); ++ ++ if (!s->dependent_slice_segment_flag) { ++ int ctb_col = s->sh->slice_segment_addr % ++ de->pic_width_in_ctbs_y; ++ int ctb_row = s->sh->slice_segment_addr / ++ de->pic_width_in_ctbs_y; ++ ++ de->reg_slicestart = (ctb_col << 0) + (ctb_row << 16); ++ } ++ ++ p1_apb_write(de, RPI_SLICESTART, de->reg_slicestart); ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++// Slice messages ++ ++static void msg_slice(struct rpivid_dec_env *const de, const u16 msg) ++{ ++ de->slice_msgs[de->num_slice_msgs++] = msg; ++} ++ ++static void program_slicecmds(struct rpivid_dec_env *const de, ++ const int sliceid) ++{ ++ int i; ++ ++ p1_apb_write(de, RPI_SLICECMDS, de->num_slice_msgs + (sliceid << 8)); ++ ++ for (i = 0; i < de->num_slice_msgs; i++) ++ p1_apb_write(de, 0x4000 + 4 * i, de->slice_msgs[i] & 0xffff); ++} ++ ++// NoBackwardPredictionFlag 8.3.5 ++// Simply checks POCs ++static int has_backward(const struct v4l2_hevc_dpb_entry *const dpb, ++ const __u8 *const idx, const unsigned int n, ++ const unsigned int cur_poc) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < n; ++i) { ++ // Compare mod 2^16 ++ // We only get u16 pocs & 8.3.1 says ++ // "The bitstream shall not contain data that result in values ++ // of DiffPicOrderCnt( picA, picB ) used in the decoding ++ // process that are not in the range of −2^15 to 2^15 − 1, ++ // inclusive." ++ if (((cur_poc - dpb[idx[i]].pic_order_cnt[0]) & 0x8000) != 0) ++ return 0; ++ } ++ return 1; ++} ++ ++static void pre_slice_decode(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s) ++{ ++ const struct v4l2_ctrl_hevc_slice_params *const sh = s->sh; ++ int weighted_pred_flag, idx; ++ u16 cmd_slice; ++ unsigned int collocated_from_l0_flag; ++ ++ de->num_slice_msgs = 0; ++ ++ cmd_slice = 0; ++ if (sh->slice_type == HEVC_SLICE_I) ++ cmd_slice = 1; ++ if (sh->slice_type == HEVC_SLICE_P) ++ cmd_slice = 2; ++ if (sh->slice_type == HEVC_SLICE_B) ++ cmd_slice = 3; ++ ++ cmd_slice |= (s->nb_refs[L0] << 2) | (s->nb_refs[L1] << 6) | ++ (s->max_num_merge_cand << 11); ++ ++ collocated_from_l0_flag = ++ !s->slice_temporal_mvp || ++ sh->slice_type != HEVC_SLICE_B || ++ (sh->flags & V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0); ++ cmd_slice |= collocated_from_l0_flag << 14; ++ ++ if (sh->slice_type == HEVC_SLICE_P || sh->slice_type == HEVC_SLICE_B) { ++ // Flag to say all reference pictures are from the past ++ const int no_backward_pred_flag = ++ has_backward(sh->dpb, sh->ref_idx_l0, s->nb_refs[L0], ++ sh->slice_pic_order_cnt) && ++ has_backward(sh->dpb, sh->ref_idx_l1, s->nb_refs[L1], ++ sh->slice_pic_order_cnt); ++ cmd_slice |= no_backward_pred_flag << 10; ++ msg_slice(de, cmd_slice); ++ ++ if (s->slice_temporal_mvp) { ++ const __u8 *const rpl = collocated_from_l0_flag ? ++ sh->ref_idx_l0 : sh->ref_idx_l1; ++ de->dpbno_col = rpl[sh->collocated_ref_idx]; ++ //v4l2_info(&de->ctx->dev->v4l2_dev, ++ // "L0=%d col_ref_idx=%d, ++ // dpb_no=%d\n", collocated_from_l0_flag, ++ // sh->collocated_ref_idx, de->dpbno_col); ++ } ++ ++ // Write reference picture descriptions ++ weighted_pred_flag = ++ sh->slice_type == HEVC_SLICE_P ? ++ !!(s->pps.flags & V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED) : ++ !!(s->pps.flags & V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED); ++ ++ for (idx = 0; idx < s->nb_refs[L0]; ++idx) { ++ unsigned int dpb_no = sh->ref_idx_l0[idx]; ++ //v4l2_info(&de->ctx->dev->v4l2_dev, ++ // "L0[%d]=dpb[%d]\n", idx, dpb_no); ++ ++ msg_slice(de, ++ dpb_no | ++ (sh->dpb[dpb_no].rps == ++ V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR ? ++ (1 << 4) : 0) | ++ (weighted_pred_flag ? (3 << 5) : 0)); ++ msg_slice(de, sh->dpb[dpb_no].pic_order_cnt[0]); ++ ++ if (weighted_pred_flag) { ++ const struct v4l2_hevc_pred_weight_table ++ *const w = &sh->pred_weight_table; ++ const int luma_weight_denom = ++ (1 << w->luma_log2_weight_denom); ++ const unsigned int chroma_log2_weight_denom = ++ (w->luma_log2_weight_denom + ++ w->delta_chroma_log2_weight_denom); ++ const int chroma_weight_denom = ++ (1 << chroma_log2_weight_denom); ++ ++ msg_slice(de, ++ w->luma_log2_weight_denom | ++ (((w->delta_luma_weight_l0[idx] + ++ luma_weight_denom) & 0x1ff) ++ << 3)); ++ msg_slice(de, w->luma_offset_l0[idx] & 0xff); ++ msg_slice(de, ++ chroma_log2_weight_denom | ++ (((w->delta_chroma_weight_l0[idx][0] + ++ chroma_weight_denom) & 0x1ff) ++ << 3)); ++ msg_slice(de, ++ w->chroma_offset_l0[idx][0] & 0xff); ++ msg_slice(de, ++ chroma_log2_weight_denom | ++ (((w->delta_chroma_weight_l0[idx][1] + ++ chroma_weight_denom) & 0x1ff) ++ << 3)); ++ msg_slice(de, ++ w->chroma_offset_l0[idx][1] & 0xff); ++ } ++ } ++ ++ for (idx = 0; idx < s->nb_refs[L1]; ++idx) { ++ unsigned int dpb_no = sh->ref_idx_l1[idx]; ++ //v4l2_info(&de->ctx->dev->v4l2_dev, ++ // "L1[%d]=dpb[%d]\n", idx, dpb_no); ++ msg_slice(de, ++ dpb_no | ++ (sh->dpb[dpb_no].rps == ++ V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR ? ++ (1 << 4) : 0) | ++ (weighted_pred_flag ? (3 << 5) : 0)); ++ msg_slice(de, sh->dpb[dpb_no].pic_order_cnt[0]); ++ if (weighted_pred_flag) { ++ const struct v4l2_hevc_pred_weight_table ++ *const w = &sh->pred_weight_table; ++ const int luma_weight_denom = ++ (1 << w->luma_log2_weight_denom); ++ const unsigned int chroma_log2_weight_denom = ++ (w->luma_log2_weight_denom + ++ w->delta_chroma_log2_weight_denom); ++ const int chroma_weight_denom = ++ (1 << chroma_log2_weight_denom); ++ ++ msg_slice(de, ++ w->luma_log2_weight_denom | ++ (((w->delta_luma_weight_l1[idx] + ++ luma_weight_denom) & 0x1ff) << 3)); ++ msg_slice(de, w->luma_offset_l1[idx] & 0xff); ++ msg_slice(de, ++ chroma_log2_weight_denom | ++ (((w->delta_chroma_weight_l1[idx][0] + ++ chroma_weight_denom) & 0x1ff) ++ << 3)); ++ msg_slice(de, ++ w->chroma_offset_l1[idx][0] & 0xff); ++ msg_slice(de, ++ chroma_log2_weight_denom | ++ (((w->delta_chroma_weight_l1[idx][1] + ++ chroma_weight_denom) & 0x1ff) ++ << 3)); ++ msg_slice(de, ++ w->chroma_offset_l1[idx][1] & 0xff); ++ } ++ } ++ } else { ++ msg_slice(de, cmd_slice); ++ } ++ ++ msg_slice(de, ++ (sh->slice_beta_offset_div2 & 15) | ++ ((sh->slice_tc_offset_div2 & 15) << 4) | ++ ((sh->flags & ++ V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED) ? ++ 1 << 8 : 0) | ++ ((sh->flags & ++ V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED) ? ++ 1 << 9 : 0) | ++ ((s->pps.flags & ++ V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED) ? ++ 1 << 10 : 0)); ++ ++ msg_slice(de, ((sh->slice_cr_qp_offset & 31) << 5) + ++ (sh->slice_cb_qp_offset & 31)); // CMD_QPOFF ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++// Write STATUS register with expected end CTU address of previous slice ++ ++static void end_previous_slice(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s, ++ const int ctb_addr_ts) ++{ ++ int last_x = ++ s->ctb_addr_ts_to_rs[ctb_addr_ts - 1] % de->pic_width_in_ctbs_y; ++ int last_y = ++ s->ctb_addr_ts_to_rs[ctb_addr_ts - 1] / de->pic_width_in_ctbs_y; ++ ++ p1_apb_write(de, RPI_STATUS, 1 + (last_x << 5) + (last_y << 18)); ++} ++ ++static void wpp_pause(struct rpivid_dec_env *const de, int ctb_row) ++{ ++ p1_apb_write(de, RPI_STATUS, (ctb_row << 18) + 0x25); ++ p1_apb_write(de, RPI_TRANSFER, PROB_BACKUP); ++ p1_apb_write(de, RPI_MODE, ++ ctb_row == de->pic_height_in_ctbs_y - 1 ? ++ 0x70000 : 0x30000); ++ p1_apb_write(de, RPI_CONTROL, (ctb_row << 16) + 2); ++} ++ ++static void wpp_end_previous_slice(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s, ++ int ctb_addr_ts) ++{ ++ int new_x = s->sh->slice_segment_addr % de->pic_width_in_ctbs_y; ++ int new_y = s->sh->slice_segment_addr / de->pic_width_in_ctbs_y; ++ int last_x = ++ s->ctb_addr_ts_to_rs[ctb_addr_ts - 1] % de->pic_width_in_ctbs_y; ++ int last_y = ++ s->ctb_addr_ts_to_rs[ctb_addr_ts - 1] / de->pic_width_in_ctbs_y; ++ ++ if (de->wpp_entry_x < 2 && (de->wpp_entry_y < new_y || new_x > 2) && ++ de->pic_width_in_ctbs_y > 2) ++ wpp_pause(de, last_y); ++ p1_apb_write(de, RPI_STATUS, 1 + (last_x << 5) + (last_y << 18)); ++ if (new_x == 2 || (de->pic_width_in_ctbs_y == 2 && ++ de->wpp_entry_y < new_y)) ++ p1_apb_write(de, RPI_TRANSFER, PROB_BACKUP); ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++// Wavefront mode ++ ++static void wpp_entry_point(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s, ++ const int do_bte, ++ const int reset_qp_y, const int ctb_addr_ts) ++{ ++ int ctb_size = 1 << s->log2_ctb_size; ++ int ctb_addr_rs = s->ctb_addr_ts_to_rs[ctb_addr_ts]; ++ ++ int ctb_col = de->wpp_entry_x = ctb_addr_rs % de->pic_width_in_ctbs_y; ++ int ctb_row = de->wpp_entry_y = ctb_addr_rs / de->pic_width_in_ctbs_y; ++ ++ int endx = de->pic_width_in_ctbs_y - 1; ++ int endy = ctb_row; ++ ++ u8 slice_w = ctb_to_slice_w_h(ctb_col, ctb_size, ++ s->sps.pic_width_in_luma_samples, ++ s->col_bd, s->num_tile_columns); ++ u8 slice_h = ctb_to_slice_w_h(ctb_row, ctb_size, ++ s->sps.pic_height_in_luma_samples, ++ s->row_bd, s->num_tile_rows); ++ ++ p1_apb_write(de, RPI_TILESTART, 0); ++ p1_apb_write(de, RPI_TILEEND, endx + (endy << 16)); ++ ++ if (do_bte) ++ p1_apb_write(de, RPI_BEGINTILEEND, endx + (endy << 16)); ++ ++ write_slice(de, s, slice_w, ++ ctb_row == de->pic_height_in_ctbs_y - 1 ? ++ slice_h : ctb_size); ++ ++ if (reset_qp_y) { ++ unsigned int sps_qp_bd_offset = ++ 6 * s->sps.bit_depth_luma_minus8; ++ ++ p1_apb_write(de, RPI_QP, sps_qp_bd_offset + s->slice_qp); ++ } ++ ++ p1_apb_write(de, RPI_MODE, ++ ctb_row == de->pic_height_in_ctbs_y - 1 ? ++ 0x60001 : 0x20001); ++ p1_apb_write(de, RPI_CONTROL, (ctb_col << 0) + (ctb_row << 16)); ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++// Wavefront mode ++ ++static void wpp_decode_slice(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s, ++ const struct v4l2_ctrl_hevc_slice_params *sh, ++ int ctb_addr_ts) ++{ ++ int i, reset_qp_y = 1; ++ int indep = !s->dependent_slice_segment_flag; ++ int ctb_col = s->sh->slice_segment_addr % de->pic_width_in_ctbs_y; ++ ++ if (ctb_addr_ts) ++ wpp_end_previous_slice(de, s, ctb_addr_ts); ++ pre_slice_decode(de, s); ++ write_bitstream(de, s); ++ if (ctb_addr_ts == 0 || indep || de->pic_width_in_ctbs_y == 1) ++ write_prob(de, s); ++ else if (ctb_col == 0) ++ p1_apb_write(de, RPI_TRANSFER, PROB_RELOAD); ++ else ++ reset_qp_y = 0; ++ program_slicecmds(de, s->slice_idx); ++ new_slice_segment(de, s); ++ wpp_entry_point(de, s, indep, reset_qp_y, ctb_addr_ts); ++ ++ for (i = 0; i < s->sh->num_entry_point_offsets; i++) { ++ int ctb_addr_rs = s->ctb_addr_ts_to_rs[ctb_addr_ts]; ++ int ctb_row = ctb_addr_rs / de->pic_width_in_ctbs_y; ++ int last_x = de->pic_width_in_ctbs_y - 1; ++ ++ if (de->pic_width_in_ctbs_y > 2) ++ wpp_pause(de, ctb_row); ++ p1_apb_write(de, RPI_STATUS, ++ (ctb_row << 18) + (last_x << 5) + 2); ++ if (de->pic_width_in_ctbs_y == 2) ++ p1_apb_write(de, RPI_TRANSFER, PROB_BACKUP); ++ if (de->pic_width_in_ctbs_y == 1) ++ write_prob(de, s); ++ else ++ p1_apb_write(de, RPI_TRANSFER, PROB_RELOAD); ++ ctb_addr_ts += s->column_width[0]; ++ wpp_entry_point(de, s, 0, 1, ctb_addr_ts); ++ } ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++// Tiles mode ++ ++static void decode_slice(struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s, ++ const struct v4l2_ctrl_hevc_slice_params *const sh, ++ int ctb_addr_ts) ++{ ++ int i, reset_qp_y; ++ ++ if (ctb_addr_ts) ++ end_previous_slice(de, s, ctb_addr_ts); ++ ++ pre_slice_decode(de, s); ++ write_bitstream(de, s); ++ ++#if DEBUG_TRACE_P1_CMD ++ if (p1_z < 256) { ++ v4l2_info(&de->ctx->dev->v4l2_dev, ++ "TS=%d, tile=%d/%d, dss=%d, flags=%#llx\n", ++ ctb_addr_ts, s->tile_id[ctb_addr_ts], ++ s->tile_id[ctb_addr_ts - 1], ++ s->dependent_slice_segment_flag, sh->flags); ++ } ++#endif ++ ++ reset_qp_y = ctb_addr_ts == 0 || ++ s->tile_id[ctb_addr_ts] != s->tile_id[ctb_addr_ts - 1] || ++ !s->dependent_slice_segment_flag; ++ if (reset_qp_y) ++ write_prob(de, s); ++ ++ program_slicecmds(de, s->slice_idx); ++ new_slice_segment(de, s); ++ new_entry_point(de, s, !s->dependent_slice_segment_flag, reset_qp_y, ++ ctb_addr_ts); ++ ++ for (i = 0; i < s->sh->num_entry_point_offsets; i++) { ++ int ctb_addr_rs = s->ctb_addr_ts_to_rs[ctb_addr_ts]; ++ int ctb_col = ctb_addr_rs % de->pic_width_in_ctbs_y; ++ int ctb_row = ctb_addr_rs / de->pic_width_in_ctbs_y; ++ int tile_x = ctb_to_tile(ctb_col, s->col_bd, ++ s->num_tile_columns - 1); ++ int tile_y = ++ ctb_to_tile(ctb_row, s->row_bd, s->num_tile_rows - 1); ++ int last_x = s->col_bd[tile_x + 1] - 1; ++ int last_y = s->row_bd[tile_y + 1] - 1; ++ ++ p1_apb_write(de, RPI_STATUS, ++ 2 + (last_x << 5) + (last_y << 18)); ++ write_prob(de, s); ++ ctb_addr_ts += s->column_width[tile_x] * s->row_height[tile_y]; ++ new_entry_point(de, s, 0, 1, ctb_addr_ts); ++ } ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++// Scaling factors ++ ++static void expand_scaling_list(const unsigned int size_id, ++ const unsigned int matrix_id, u8 *const dst0, ++ const u8 *const src0, uint8_t dc) ++{ ++ u8 *d; ++ unsigned int x, y; ++ ++ // FIXME: matrix_id is unused ? ++ switch (size_id) { ++ case 0: ++ memcpy(dst0, src0, 16); ++ break; ++ case 1: ++ memcpy(dst0, src0, 64); ++ break; ++ case 2: ++ d = dst0; ++ ++ for (y = 0; y != 16; y++) { ++ const u8 *s = src0 + (y >> 1) * 8; ++ ++ for (x = 0; x != 8; ++x) { ++ *d++ = *s; ++ *d++ = *s++; ++ } ++ } ++ dst0[0] = dc; ++ break; ++ default: ++ d = dst0; ++ ++ for (y = 0; y != 32; y++) { ++ const u8 *s = src0 + (y >> 2) * 8; ++ ++ for (x = 0; x != 8; ++x) { ++ *d++ = *s; ++ *d++ = *s; ++ *d++ = *s; ++ *d++ = *s++; ++ } ++ } ++ dst0[0] = dc; ++ break; ++ } ++} ++ ++static void populate_scaling_factors(const struct rpivid_run *const run, ++ struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s) ++{ ++ const struct v4l2_ctrl_hevc_scaling_matrix *const sl = ++ run->h265.scaling_matrix; ++ // Array of constants for scaling factors ++ static const u32 scaling_factor_offsets[4][6] = { ++ // MID0 MID1 MID2 MID3 MID4 MID5 ++ // SID0 (4x4) ++ { 0x0000, 0x0010, 0x0020, 0x0030, 0x0040, 0x0050 }, ++ // SID1 (8x8) ++ { 0x0060, 0x00A0, 0x00E0, 0x0120, 0x0160, 0x01A0 }, ++ // SID2 (16x16) ++ { 0x01E0, 0x02E0, 0x03E0, 0x04E0, 0x05E0, 0x06E0 }, ++ // SID3 (32x32) ++ { 0x07E0, 0x0BE0, 0x0000, 0x0000, 0x0000, 0x0000 } ++ }; ++ ++ unsigned int mid; ++ ++ for (mid = 0; mid < 6; mid++) ++ expand_scaling_list(0, mid, ++ de->scaling_factors + ++ scaling_factor_offsets[0][mid], ++ sl->scaling_list_4x4[mid], 0); ++ for (mid = 0; mid < 6; mid++) ++ expand_scaling_list(1, mid, ++ de->scaling_factors + ++ scaling_factor_offsets[1][mid], ++ sl->scaling_list_8x8[mid], 0); ++ for (mid = 0; mid < 6; mid++) ++ expand_scaling_list(2, mid, ++ de->scaling_factors + ++ scaling_factor_offsets[2][mid], ++ sl->scaling_list_16x16[mid], ++ sl->scaling_list_dc_coef_16x16[mid]); ++ for (mid = 0; mid < 2; mid += 1) ++ expand_scaling_list(3, mid, ++ de->scaling_factors + ++ scaling_factor_offsets[3][mid], ++ sl->scaling_list_32x32[mid], ++ sl->scaling_list_dc_coef_32x32[mid]); ++} ++ ++static void free_ps_info(struct rpivid_dec_state *const s) ++{ ++ kfree(s->ctb_addr_rs_to_ts); ++ s->ctb_addr_rs_to_ts = NULL; ++ kfree(s->ctb_addr_ts_to_rs); ++ s->ctb_addr_ts_to_rs = NULL; ++ kfree(s->tile_id); ++ s->tile_id = NULL; ++ ++ kfree(s->col_bd); ++ s->col_bd = NULL; ++ kfree(s->row_bd); ++ s->row_bd = NULL; ++} ++ ++static int updated_ps(struct rpivid_dec_state *const s) ++{ ++ unsigned int ctb_addr_rs; ++ int j, x, y, tile_id; ++ unsigned int i; ++ ++ free_ps_info(s); ++ ++ // Inferred parameters ++ s->log2_ctb_size = s->sps.log2_min_luma_coding_block_size_minus3 + 3 + ++ s->sps.log2_diff_max_min_luma_coding_block_size; ++ ++ s->ctb_width = (s->sps.pic_width_in_luma_samples + ++ (1 << s->log2_ctb_size) - 1) >> ++ s->log2_ctb_size; ++ s->ctb_height = (s->sps.pic_height_in_luma_samples + ++ (1 << s->log2_ctb_size) - 1) >> ++ s->log2_ctb_size; ++ s->ctb_size = s->ctb_width * s->ctb_height; ++ ++ // Inferred parameters ++ ++ if (!(s->pps.flags & V4L2_HEVC_PPS_FLAG_TILES_ENABLED)) { ++ s->num_tile_columns = 1; ++ s->num_tile_rows = 1; ++ s->column_width[0] = s->ctb_width; ++ s->row_height[0] = s->ctb_height; ++ } else { ++ s->num_tile_columns = s->pps.num_tile_columns_minus1 + 1; ++ s->num_tile_rows = s->pps.num_tile_rows_minus1 + 1; ++ for (i = 0; i < s->num_tile_columns; ++i) ++ s->column_width[i] = s->pps.column_width_minus1[i] + 1; ++ for (i = 0; i < s->num_tile_rows; ++i) ++ s->row_height[i] = s->pps.row_height_minus1[i] + 1; ++ } ++ ++ s->col_bd = kmalloc((s->num_tile_columns + 1) * sizeof(*s->col_bd), ++ GFP_KERNEL); ++ s->row_bd = kmalloc((s->num_tile_rows + 1) * sizeof(*s->row_bd), ++ GFP_KERNEL); ++ ++ s->col_bd[0] = 0; ++ for (i = 0; i < s->num_tile_columns; i++) ++ s->col_bd[i + 1] = s->col_bd[i] + s->column_width[i]; ++ ++ s->row_bd[0] = 0; ++ for (i = 0; i < s->num_tile_rows; i++) ++ s->row_bd[i + 1] = s->row_bd[i] + s->row_height[i]; ++ ++ s->ctb_addr_rs_to_ts = kmalloc_array(s->ctb_size, ++ sizeof(*s->ctb_addr_rs_to_ts), ++ GFP_KERNEL); ++ s->ctb_addr_ts_to_rs = kmalloc_array(s->ctb_size, ++ sizeof(*s->ctb_addr_ts_to_rs), ++ GFP_KERNEL); ++ s->tile_id = kmalloc_array(s->ctb_size, sizeof(*s->tile_id), ++ GFP_KERNEL); ++ ++ for (ctb_addr_rs = 0; ctb_addr_rs < s->ctb_size; ctb_addr_rs++) { ++ int tb_x = ctb_addr_rs % s->ctb_width; ++ int tb_y = ctb_addr_rs / s->ctb_width; ++ int tile_x = 0; ++ int tile_y = 0; ++ int val = 0; ++ ++ for (i = 0; i < s->num_tile_columns; i++) { ++ if (tb_x < s->col_bd[i + 1]) { ++ tile_x = i; ++ break; ++ } ++ } ++ ++ for (i = 0; i < s->num_tile_rows; i++) { ++ if (tb_y < s->row_bd[i + 1]) { ++ tile_y = i; ++ break; ++ } ++ } ++ ++ for (i = 0; i < tile_x; i++) ++ val += s->row_height[tile_y] * s->column_width[i]; ++ for (i = 0; i < tile_y; i++) ++ val += s->ctb_width * s->row_height[i]; ++ ++ val += (tb_y - s->row_bd[tile_y]) * s->column_width[tile_x] + ++ tb_x - s->col_bd[tile_x]; ++ ++ s->ctb_addr_rs_to_ts[ctb_addr_rs] = val; ++ s->ctb_addr_ts_to_rs[val] = ctb_addr_rs; ++ } ++ ++ for (j = 0, tile_id = 0; j < s->num_tile_rows; j++) ++ for (i = 0; i < s->num_tile_columns; i++, tile_id++) ++ for (y = s->row_bd[j]; y < s->row_bd[j + 1]; y++) ++ for (x = s->col_bd[i]; ++ x < s->col_bd[i + 1]; ++ x++) ++ s->tile_id[s->ctb_addr_rs_to_ts ++ [y * s->ctb_width + ++ x]] = tile_id; ++ ++ return 0; ++} ++ ++static int frame_end(struct rpivid_dev *const dev, ++ struct rpivid_dec_env *const de, ++ const struct rpivid_dec_state *const s) ++{ ++ const unsigned int last_x = s->col_bd[s->num_tile_columns] - 1; ++ const unsigned int last_y = s->row_bd[s->num_tile_rows] - 1; ++ size_t cmd_size; ++ ++ if (s->pps.flags & V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED) { ++ if (de->wpp_entry_x < 2 && de->pic_width_in_ctbs_y > 2) ++ wpp_pause(de, last_y); ++ } ++ p1_apb_write(de, RPI_STATUS, 1 + (last_x << 5) + (last_y << 18)); ++ ++ // Copy commands out to dma buf ++ cmd_size = de->cmd_len * sizeof(de->cmd_fifo[0]); ++ ++ if (!de->cmd_copy_gptr->ptr || cmd_size > de->cmd_copy_gptr->size) { ++ size_t cmd_alloc = round_up_size(cmd_size); ++ ++ if (gptr_realloc_new(dev, de->cmd_copy_gptr, cmd_alloc)) { ++ v4l2_err(&dev->v4l2_dev, ++ "Alloc cmd buffer (%d): FAILED\n", cmd_alloc); ++ return -ENOMEM; ++ } ++ v4l2_info(&dev->v4l2_dev, "Alloc cmd buffer (%d): OK\n", ++ cmd_alloc); ++ } ++ ++ memcpy(de->cmd_copy_gptr->ptr, de->cmd_fifo, cmd_size); ++ return 0; ++} ++ ++static void setup_colmv(struct rpivid_ctx *const ctx, struct rpivid_run *run, ++ struct rpivid_dec_state *const s) ++{ ++ ctx->colmv_stride = ALIGN(s->sps.pic_width_in_luma_samples, 64); ++ ctx->colmv_picsize = ctx->colmv_stride * ++ (ALIGN(s->sps.pic_height_in_luma_samples, 64) >> 4); ++} ++ ++// Can be called from irq context ++static struct rpivid_dec_env *dec_env_new(struct rpivid_ctx *const ctx) ++{ ++ struct rpivid_dec_env *de; ++ unsigned long lock_flags; ++ ++ spin_lock_irqsave(&ctx->dec_lock, lock_flags); ++ ++ de = ctx->dec_free; ++ if (de) { ++ ctx->dec_free = de->next; ++ de->next = NULL; ++ de->state = RPIVID_DECODE_SLICE_START; ++ } ++ ++ spin_unlock_irqrestore(&ctx->dec_lock, lock_flags); ++ return de; ++} ++ ++// Can be called from irq context ++static void dec_env_delete(struct rpivid_dec_env *const de) ++{ ++ struct rpivid_ctx * const ctx = de->ctx; ++ unsigned long lock_flags; ++ ++ aux_q_release(ctx, &de->frame_aux); ++ aux_q_release(ctx, &de->col_aux); ++ ++ spin_lock_irqsave(&ctx->dec_lock, lock_flags); ++ ++ de->state = RPIVID_DECODE_END; ++ de->next = ctx->dec_free; ++ ctx->dec_free = de; ++ ++ spin_unlock_irqrestore(&ctx->dec_lock, lock_flags); ++} ++ ++static void dec_env_uninit(struct rpivid_ctx *const ctx) ++{ ++ unsigned int i; ++ ++ if (ctx->dec_pool) { ++ for (i = 0; i != RPIVID_DEC_ENV_COUNT; ++i) { ++ struct rpivid_dec_env *const de = ctx->dec_pool + i; ++ ++ kfree(de->cmd_fifo); ++ } ++ ++ kfree(ctx->dec_pool); ++ } ++ ++ ctx->dec_pool = NULL; ++ ctx->dec_free = NULL; ++} ++ ++static int dec_env_init(struct rpivid_ctx *const ctx) ++{ ++ unsigned int i; ++ ++ ctx->dec_pool = kzalloc(sizeof(*ctx->dec_pool) * RPIVID_DEC_ENV_COUNT, ++ GFP_KERNEL); ++ if (!ctx->dec_pool) ++ return -1; ++ ++ spin_lock_init(&ctx->dec_lock); ++ ++ // Build free chain ++ ctx->dec_free = ctx->dec_pool; ++ for (i = 0; i != RPIVID_DEC_ENV_COUNT - 1; ++i) ++ ctx->dec_pool[i].next = ctx->dec_pool + i + 1; ++ ++ // Fill in other bits ++ for (i = 0; i != RPIVID_DEC_ENV_COUNT; ++i) { ++ struct rpivid_dec_env *const de = ctx->dec_pool + i; ++ ++ de->ctx = ctx; ++ de->decode_order = i; ++ de->cmd_max = 1024; ++ de->cmd_fifo = kmalloc_array(de->cmd_max, ++ sizeof(struct rpi_cmd), ++ GFP_KERNEL); ++ if (!de->cmd_fifo) ++ goto fail; ++ } ++ ++ return 0; ++ ++fail: ++ dec_env_uninit(ctx); ++ return -1; ++} ++ ++// Assume that we get exactly the same DPB for every slice ++// it makes no real sense otherwise ++#if V4L2_HEVC_DPB_ENTRIES_NUM_MAX > 16 ++#error HEVC_DPB_ENTRIES > h/w slots ++#endif ++ ++static u32 mk_config2(const struct rpivid_dec_state *const s) ++{ ++ const struct v4l2_ctrl_hevc_sps *const sps = &s->sps; ++ const struct v4l2_ctrl_hevc_pps *const pps = &s->pps; ++ u32 c; ++ // BitDepthY ++ c = (sps->bit_depth_luma_minus8 + 8) << 0; ++ // BitDepthC ++ c |= (sps->bit_depth_chroma_minus8 + 8) << 4; ++ // BitDepthY ++ if (sps->bit_depth_luma_minus8) ++ c |= BIT(8); ++ // BitDepthC ++ if (sps->bit_depth_chroma_minus8) ++ c |= BIT(9); ++ c |= s->log2_ctb_size << 10; ++ if (pps->flags & V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED) ++ c |= BIT(13); ++ if (sps->flags & V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED) ++ c |= BIT(14); ++ if (sps->flags & V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED) ++ c |= BIT(15); /* Write motion vectors to external memory */ ++ c |= (pps->log2_parallel_merge_level_minus2 + 2) << 16; ++ if (s->slice_temporal_mvp) ++ c |= BIT(19); ++ if (sps->flags & V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED) ++ c |= BIT(20); ++ c |= (pps->pps_cb_qp_offset & 31) << 21; ++ c |= (pps->pps_cr_qp_offset & 31) << 26; ++ return c; ++} ++ ++static void rpivid_h265_setup(struct rpivid_ctx *ctx, struct rpivid_run *run) ++{ ++ struct rpivid_dev *const dev = ctx->dev; ++ const struct v4l2_ctrl_hevc_slice_params *const sh = ++ run->h265.slice_params; ++ const struct v4l2_hevc_pred_weight_table *pred_weight_table; ++ struct rpivid_q_aux *dpb_q_aux[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; ++ struct rpivid_dec_state *const s = ctx->state; ++ struct vb2_queue *vq; ++ struct rpivid_dec_env *de; ++ int ctb_addr_ts; ++ unsigned int i; ++ int use_aux; ++ bool slice_temporal_mvp; ++ ++ pred_weight_table = &sh->pred_weight_table; ++ ++ s->frame_end = ++ ((run->src->flags & V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF) == 0); ++ ++ de = ctx->dec0; ++ slice_temporal_mvp = (sh->flags & ++ V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED); ++ ++ if (de && de->state != RPIVID_DECODE_END) { ++ ++s->slice_idx; ++ ++ switch (de->state) { ++ case RPIVID_DECODE_SLICE_CONTINUE: ++ // Expected state ++ break; ++ default: ++ v4l2_err(&dev->v4l2_dev, "%s: Unexpected state: %d\n", ++ __func__, de->state); ++ /* FALLTHRU */ ++ case RPIVID_DECODE_ERROR_CONTINUE: ++ // Uncleared error - fail now ++ goto fail; ++ } ++ ++ if (s->slice_temporal_mvp != slice_temporal_mvp) { ++ v4l2_warn(&dev->v4l2_dev, ++ "Slice Temporal MVP non-constant\n"); ++ goto fail; ++ } ++ } else { ++ /* Frame start */ ++ unsigned int ctb_size_y; ++ bool sps_changed = false; ++ ++ if (memcmp(&s->sps, run->h265.sps, sizeof(s->sps)) != 0) { ++ /* SPS changed */ ++ v4l2_info(&dev->v4l2_dev, "SPS changed\n"); ++ memcpy(&s->sps, run->h265.sps, sizeof(s->sps)); ++ sps_changed = true; ++ } ++ if (sps_changed || ++ memcmp(&s->pps, run->h265.pps, sizeof(s->pps)) != 0) { ++ /* SPS changed */ ++ v4l2_info(&dev->v4l2_dev, "PPS changed\n"); ++ memcpy(&s->pps, run->h265.pps, sizeof(s->pps)); ++ ++ /* Recalc stuff as required */ ++ updated_ps(s); ++ } ++ ++ de = dec_env_new(ctx); ++ if (!de) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to find free decode env\n"); ++ goto fail; ++ } ++ ctx->dec0 = de; ++ ++ ctb_size_y = ++ 1U << (s->sps.log2_min_luma_coding_block_size_minus3 + ++ 3 + ++ s->sps.log2_diff_max_min_luma_coding_block_size); ++ ++ de->pic_width_in_ctbs_y = ++ (s->sps.pic_width_in_luma_samples + ctb_size_y - 1) / ++ ctb_size_y; // 7-15 ++ de->pic_height_in_ctbs_y = ++ (s->sps.pic_height_in_luma_samples + ctb_size_y - 1) / ++ ctb_size_y; // 7-17 ++ de->cmd_len = 0; ++ de->dpbno_col = ~0U; ++ ++ de->bit_copy_gptr = ctx->bitbufs + 0; ++ de->bit_copy_len = 0; ++ de->cmd_copy_gptr = ctx->cmdbufs + 0; ++ ++ de->frame_c_offset = ctx->dst_fmt.height * 128; ++ de->frame_stride = ctx->dst_fmt.bytesperline * 128; ++ de->frame_addr = ++ vb2_dma_contig_plane_dma_addr(&run->dst->vb2_buf, 0); ++ de->frame_aux = NULL; ++ ++ if (s->sps.bit_depth_luma_minus8 != ++ s->sps.bit_depth_chroma_minus8) { ++ v4l2_warn(&dev->v4l2_dev, ++ "Chroma depth (%d) != Luma depth (%d)\n", ++ s->sps.bit_depth_chroma_minus8 + 8, ++ s->sps.bit_depth_luma_minus8 + 8); ++ goto fail; ++ } ++ if (s->sps.bit_depth_luma_minus8 == 0) { ++ if (ctx->dst_fmt.pixelformat != ++ V4L2_PIX_FMT_NV12_COL128) { ++ v4l2_err(&dev->v4l2_dev, ++ "Pixel format %#x != NV12_COL128 for 8-bit output", ++ ctx->dst_fmt.pixelformat); ++ goto fail; ++ } ++ } else if (s->sps.bit_depth_luma_minus8 == 2) { ++ if (ctx->dst_fmt.pixelformat != ++ V4L2_PIX_FMT_NV12_10_COL128) { ++ v4l2_err(&dev->v4l2_dev, ++ "Pixel format %#x != NV12_10_COL128 for 10-bit output", ++ ctx->dst_fmt.pixelformat); ++ goto fail; ++ } ++ } else { ++ v4l2_warn(&dev->v4l2_dev, ++ "Luma depth (%d) unsupported\n", ++ s->sps.bit_depth_luma_minus8 + 8); ++ goto fail; ++ } ++ if (run->dst->vb2_buf.num_planes != 1) { ++ v4l2_warn(&dev->v4l2_dev, "Capture planes (%d) != 1\n", ++ run->dst->vb2_buf.num_planes); ++ goto fail; ++ } ++ if (run->dst->planes[0].length < ++ ctx->dst_fmt.sizeimage) { ++ v4l2_warn(&dev->v4l2_dev, ++ "Capture plane[0] length (%d) < sizeimage (%d)\n", ++ run->dst->planes[0].length, ++ ctx->dst_fmt.sizeimage); ++ goto fail; ++ } ++ ++ if (s->sps.pic_width_in_luma_samples > 4096 || ++ s->sps.pic_height_in_luma_samples > 4096) { ++ v4l2_warn(&dev->v4l2_dev, ++ "Pic dimension (%dx%d) exeeds 4096\n", ++ s->sps.pic_width_in_luma_samples, ++ s->sps.pic_height_in_luma_samples); ++ goto fail; ++ } ++ ++ // Fill in ref planes with our address s.t. if we mess ++ // up refs somehow then we still have a valid address ++ // entry ++ for (i = 0; i != 16; ++i) ++ de->ref_addrs[i] = de->frame_addr; ++ ++ /* ++ * Stash initial temporal_mvp flag ++ * This must be the same for all pic slices (7.4.7.1) ++ */ ++ s->slice_temporal_mvp = slice_temporal_mvp; ++ ++ // Phase 2 reg pre-calc ++ de->rpi_config2 = mk_config2(s); ++ de->rpi_framesize = (s->sps.pic_height_in_luma_samples << 16) | ++ s->sps.pic_width_in_luma_samples; ++ de->rpi_currpoc = sh->slice_pic_order_cnt; ++ ++ if (s->sps.flags & ++ V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED) { ++ setup_colmv(ctx, run, s); ++ } ++ ++ s->slice_idx = 0; ++ ++ if (sh->slice_segment_addr != 0) { ++ v4l2_warn(&dev->v4l2_dev, ++ "New frame but segment_addr=%d\n", ++ sh->slice_segment_addr); ++ goto fail; ++ } ++ ++ /* Allocate a bitbuf if we need one - don't need one if single ++ * slice as we can use the src buf directly ++ */ ++ if (!s->frame_end && !de->bit_copy_gptr->ptr) { ++ const size_t wxh = s->sps.pic_width_in_luma_samples * ++ s->sps.pic_height_in_luma_samples; ++ size_t bits_alloc; ++ ++ /* Annex A gives a min compression of 2 @ lvl 3.1 ++ * (wxh <= 983040) and min 4 thereafter but avoid ++ * the odity of 983041 having a lower limit than ++ * 983040. ++ * Multiply by 3/2 for 4:2:0 ++ */ ++ bits_alloc = wxh < 983040 ? wxh * 3 / 4 : ++ wxh < 983040 * 2 ? 983040 * 3 / 4 : ++ wxh * 3 / 8; ++ bits_alloc = round_up_size(bits_alloc); ++ ++ if (gptr_alloc(dev, de->bit_copy_gptr, ++ bits_alloc, ++ DMA_ATTR_FORCE_CONTIGUOUS) != 0) { ++ v4l2_err(&dev->v4l2_dev, ++ "Unable to alloc buf (%d) for bit copy\n", ++ bits_alloc); ++ goto fail; ++ } ++ v4l2_info(&dev->v4l2_dev, ++ "Alloc buf (%d) for bit copy OK\n", ++ bits_alloc); ++ } ++ } ++ ++ // Pre calc a few things ++ s->src_addr = ++ !s->frame_end ? ++ 0 : ++ vb2_dma_contig_plane_dma_addr(&run->src->vb2_buf, 0); ++ s->src_buf = s->src_addr != 0 ? NULL : ++ vb2_plane_vaddr(&run->src->vb2_buf, 0); ++ if (!s->src_addr && !s->src_buf) { ++ v4l2_err(&dev->v4l2_dev, "Failed to map src buffer\n"); ++ goto fail; ++ } ++ ++ s->sh = sh; ++ s->slice_qp = 26 + s->pps.init_qp_minus26 + s->sh->slice_qp_delta; ++ s->max_num_merge_cand = sh->slice_type == HEVC_SLICE_I ? ++ 0 : ++ (5 - sh->five_minus_max_num_merge_cand); ++ // * SH DSS flag invented by me - but clearly needed ++ s->dependent_slice_segment_flag = ++ ((sh->flags & ++ V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT) != 0); ++ ++ s->nb_refs[0] = (sh->slice_type == HEVC_SLICE_I) ? ++ 0 : ++ sh->num_ref_idx_l0_active_minus1 + 1; ++ s->nb_refs[1] = (sh->slice_type != HEVC_SLICE_B) ? ++ 0 : ++ sh->num_ref_idx_l1_active_minus1 + 1; ++ ++ if (s->sps.flags & V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED) ++ populate_scaling_factors(run, de, s); ++ ++ ctb_addr_ts = s->ctb_addr_rs_to_ts[sh->slice_segment_addr]; ++ ++ if ((s->pps.flags & V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED)) ++ wpp_decode_slice(de, s, sh, ctb_addr_ts); ++ else ++ decode_slice(de, s, sh, ctb_addr_ts); ++ ++ if (!s->frame_end) ++ return; ++ ++ // Frame end ++ memset(dpb_q_aux, 0, ++ sizeof(*dpb_q_aux) * V4L2_HEVC_DPB_ENTRIES_NUM_MAX); ++ /* ++ * Need Aux ents for all (ref) DPB ents if temporal MV could ++ * be enabled for any pic ++ * ** At the moment we have aux ents for all pics whether or not ++ * they are ref ++ */ ++ use_aux = ((s->sps.flags & ++ V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED) != 0); ++ ++ // Locate ref frames ++ // At least in the current implementation this is constant across all ++ // slices. If this changes we will need idx mapping code. ++ // Uses sh so here rather than trigger ++ ++ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE); ++ ++ if (!vq) { ++ v4l2_err(&dev->v4l2_dev, "VQ gone!\n"); ++ goto fail; ++ } ++ ++ // v4l2_info(&dev->v4l2_dev, "rpivid_h265_end of frame\n"); ++ if (frame_end(dev, de, s)) ++ goto fail; ++ ++ for (i = 0; i < sh->num_active_dpb_entries; ++i) { ++ int buffer_index = ++ vb2_find_timestamp(vq, sh->dpb[i].timestamp, 0); ++ struct vb2_buffer *buf = buffer_index < 0 ? ++ NULL : ++ vb2_get_buffer(vq, buffer_index); ++ ++ if (!buf) { ++ v4l2_warn(&dev->v4l2_dev, ++ "Missing DPB ent %d, timestamp=%lld, index=%d\n", ++ i, (long long)sh->dpb[i].timestamp, ++ buffer_index); ++ continue; ++ } ++ ++ if (use_aux) { ++ dpb_q_aux[i] = aux_q_ref(ctx, ++ ctx->aux_ents[buffer_index]); ++ if (!dpb_q_aux[i]) ++ v4l2_warn(&dev->v4l2_dev, ++ "Missing DPB AUX ent %d index=%d\n", ++ i, buffer_index); ++ } ++ ++ de->ref_addrs[i] = ++ vb2_dma_contig_plane_dma_addr(buf, 0); ++ } ++ ++ // Move DPB from temp ++ for (i = 0; i != V4L2_HEVC_DPB_ENTRIES_NUM_MAX; ++i) { ++ aux_q_release(ctx, &s->ref_aux[i]); ++ s->ref_aux[i] = dpb_q_aux[i]; ++ } ++ // Unref the old frame aux too - it is either in the DPB or not ++ // now ++ aux_q_release(ctx, &s->frame_aux); ++ ++ if (use_aux) { ++ // New frame so new aux ent ++ // ??? Do we need this if non-ref ??? can we tell ++ s->frame_aux = aux_q_new(ctx, run->dst->vb2_buf.index); ++ ++ if (!s->frame_aux) { ++ v4l2_err(&dev->v4l2_dev, ++ "Failed to obtain aux storage for frame\n"); ++ goto fail; ++ } ++ ++ de->frame_aux = aux_q_ref(ctx, s->frame_aux); ++ } ++ ++ if (de->dpbno_col != ~0U) { ++ if (de->dpbno_col >= sh->num_active_dpb_entries) { ++ v4l2_err(&dev->v4l2_dev, ++ "Col ref index %d >= %d\n", ++ de->dpbno_col, ++ sh->num_active_dpb_entries); ++ } else { ++ // Standard requires that the col pic is ++ // constant for the duration of the pic ++ // (text of collocated_ref_idx in H265-2 2018 ++ // 7.4.7.1) ++ ++ // Spot the collocated ref in passing ++ de->col_aux = aux_q_ref(ctx, ++ dpb_q_aux[de->dpbno_col]); ++ ++ if (!de->col_aux) { ++ v4l2_warn(&dev->v4l2_dev, ++ "Missing DPB ent for col\n"); ++ // Probably need to abort if this fails ++ // as P2 may explode on bad data ++ goto fail; ++ } ++ } ++ } ++ ++ de->state = RPIVID_DECODE_PHASE1; ++ return; ++ ++fail: ++ if (de) ++ // Actual error reporting happens in Trigger ++ de->state = s->frame_end ? RPIVID_DECODE_ERROR_DONE : ++ RPIVID_DECODE_ERROR_CONTINUE; ++} ++ ++////////////////////////////////////////////////////////////////////////////// ++// Handle PU and COEFF stream overflow ++ ++// Returns: ++// -1 Phase 1 decode error ++// 0 OK ++// >0 Out of space (bitmask) ++ ++#define STATUS_COEFF_EXHAUSTED 8 ++#define STATUS_PU_EXHAUSTED 16 ++ ++static int check_status(const struct rpivid_dev *const dev) ++{ ++ const u32 cfstatus = apb_read(dev, RPI_CFSTATUS); ++ const u32 cfnum = apb_read(dev, RPI_CFNUM); ++ u32 status = apb_read(dev, RPI_STATUS); ++ ++ // Handle PU and COEFF stream overflow ++ ++ // this is the definition of successful completion of phase 1 ++ // it assures that status register is zero and all blocks in each tile ++ // have completed ++ if (cfstatus == cfnum) ++ return 0; //No error ++ ++ status &= (STATUS_PU_EXHAUSTED | STATUS_COEFF_EXHAUSTED); ++ if (status) ++ return status; ++ ++ return -1; ++} ++ ++static void cb_phase2(struct rpivid_dev *const dev, void *v) ++{ ++ struct rpivid_dec_env *const de = v; ++ struct rpivid_ctx *const ctx = de->ctx; ++ ++ xtrace_in(dev, de); ++ ++ v4l2_m2m_cap_buf_return(dev->m2m_dev, ctx->fh.m2m_ctx, de->frame_buf, ++ VB2_BUF_STATE_DONE); ++ de->frame_buf = NULL; ++ ++ /* Delete de before finish as finish might immediately trigger a reuse ++ * of de ++ */ ++ dec_env_delete(de); ++ ++ if (atomic_add_return(-1, &ctx->p2out) >= RPIVID_P2BUF_COUNT - 1) { ++ xtrace_fin(dev, de); ++ v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx, ++ VB2_BUF_STATE_DONE); ++ } ++ ++ xtrace_ok(dev, de); ++} ++ ++static void phase2_claimed(struct rpivid_dev *const dev, void *v) ++{ ++ struct rpivid_dec_env *const de = v; ++ unsigned int i; ++ ++ xtrace_in(dev, de); ++ ++ apb_write_vc_addr(dev, RPI_PURBASE, de->pu_base_vc); ++ apb_write_vc_len(dev, RPI_PURSTRIDE, de->pu_stride); ++ apb_write_vc_addr(dev, RPI_COEFFRBASE, de->coeff_base_vc); ++ apb_write_vc_len(dev, RPI_COEFFRSTRIDE, de->coeff_stride); ++ ++ apb_write_vc_addr(dev, RPI_OUTYBASE, de->frame_addr); ++ apb_write_vc_addr(dev, RPI_OUTCBASE, ++ de->frame_addr + de->frame_c_offset); ++ apb_write_vc_len(dev, RPI_OUTYSTRIDE, de->frame_stride); ++ apb_write_vc_len(dev, RPI_OUTCSTRIDE, de->frame_stride); ++ ++ // v4l2_info(&dev->v4l2_dev, "Frame: Y=%llx, C=%llx, Stride=%x\n", ++ // de->frame_addr, de->frame_addr + de->frame_c_offset, ++ // de->frame_stride); ++ ++ for (i = 0; i < 16; i++) { ++ // Strides are in fact unused but fill in anyway ++ apb_write_vc_addr(dev, 0x9000 + 16 * i, de->ref_addrs[i]); ++ apb_write_vc_len(dev, 0x9004 + 16 * i, de->frame_stride); ++ apb_write_vc_addr(dev, 0x9008 + 16 * i, ++ de->ref_addrs[i] + de->frame_c_offset); ++ apb_write_vc_len(dev, 0x900C + 16 * i, de->frame_stride); ++ } ++ ++ apb_write(dev, RPI_CONFIG2, de->rpi_config2); ++ apb_write(dev, RPI_FRAMESIZE, de->rpi_framesize); ++ apb_write(dev, RPI_CURRPOC, de->rpi_currpoc); ++ // v4l2_info(&dev->v4l2_dev, "Config2=%#x, FrameSize=%#x, POC=%#x\n", ++ // de->rpi_config2, de->rpi_framesize, de->rpi_currpoc); ++ ++ // collocated reads/writes ++ apb_write_vc_len(dev, RPI_COLSTRIDE, ++ de->ctx->colmv_stride); // Read vals ++ apb_write_vc_len(dev, RPI_MVSTRIDE, ++ de->ctx->colmv_stride); // Write vals ++ apb_write_vc_addr(dev, RPI_MVBASE, ++ !de->frame_aux ? 0 : de->frame_aux->col.addr); ++ apb_write_vc_addr(dev, RPI_COLBASE, ++ !de->col_aux ? 0 : de->col_aux->col.addr); ++ ++ //v4l2_info(&dev->v4l2_dev, ++ // "Mv=%llx, Col=%llx, Stride=%x, Buf=%llx->%llx\n", ++ // de->rpi_mvbase, de->rpi_colbase, de->ctx->colmv_stride, ++ // de->ctx->colmvbuf.addr, de->ctx->colmvbuf.addr + ++ // de->ctx->colmvbuf.size); ++ ++ rpivid_hw_irq_active2_irq(dev, &de->irq_ent, cb_phase2, de); ++ ++ apb_write_final(dev, RPI_NUMROWS, de->pic_height_in_ctbs_y); ++ ++ xtrace_ok(dev, de); ++} ++ ++static void phase1_claimed(struct rpivid_dev *const dev, void *v); ++ ++static void phase1_thread(struct rpivid_dev *const dev, void *v) ++{ ++ struct rpivid_dec_env *const de = v; ++ struct rpivid_ctx *const ctx = de->ctx; ++ ++ struct rpivid_gptr *const pu_gptr = ctx->pu_bufs + ctx->p2idx; ++ struct rpivid_gptr *const coeff_gptr = ctx->coeff_bufs + ctx->p2idx; ++ ++ xtrace_in(dev, de); ++ ++ if (de->p1_status & STATUS_PU_EXHAUSTED) { ++ if (gptr_realloc_new(dev, pu_gptr, next_size(pu_gptr->size))) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: PU realloc (%#x) failed\n", ++ __func__, pu_gptr->size); ++ goto fail; ++ } ++ v4l2_info(&dev->v4l2_dev, "%s: PU realloc (%#x) OK\n", ++ __func__, pu_gptr->size); ++ } ++ ++ if (de->p1_status & STATUS_COEFF_EXHAUSTED) { ++ if (gptr_realloc_new(dev, coeff_gptr, ++ next_size(coeff_gptr->size))) { ++ v4l2_err(&dev->v4l2_dev, ++ "%s: Coeff realloc (%#x) failed\n", ++ __func__, coeff_gptr->size); ++ goto fail; ++ } ++ v4l2_info(&dev->v4l2_dev, "%s: Coeff realloc (%#x) OK\n", ++ __func__, coeff_gptr->size); ++ } ++ ++ phase1_claimed(dev, de); ++ xtrace_ok(dev, de); ++ return; ++ ++fail: ++ dec_env_delete(de); ++ xtrace_fin(dev, de); ++ v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx, ++ VB2_BUF_STATE_ERROR); ++ xtrace_fail(dev, de); ++} ++ ++/* Always called in irq context (this is good) */ ++static void cb_phase1(struct rpivid_dev *const dev, void *v) ++{ ++ struct rpivid_dec_env *const de = v; ++ struct rpivid_ctx *const ctx = de->ctx; ++ ++ xtrace_in(dev, de); ++ ++ de->p1_status = check_status(dev); ++ if (de->p1_status != 0) { ++ v4l2_info(&dev->v4l2_dev, "%s: Post wait: %#x\n", ++ __func__, de->p1_status); ++ ++ if (de->p1_status < 0) ++ goto fail; ++ ++ /* Need to realloc - push onto a thread rather than IRQ */ ++ rpivid_hw_irq_active1_thread(dev, &de->irq_ent, ++ phase1_thread, de); ++ return; ++ } ++ ++ /* After the frame-buf is detached it must be returned but from ++ * this point onward (phase2_claimed, cb_phase2) there are no error ++ * paths so the return at the end of cb_phase2 is all that is needed ++ */ ++ de->frame_buf = v4l2_m2m_cap_buf_detach(dev->m2m_dev, ctx->fh.m2m_ctx); ++ if (!de->frame_buf) { ++ v4l2_err(&dev->v4l2_dev, "%s: No detached buffer\n", __func__); ++ goto fail; ++ } ++ ++ ctx->p2idx = ++ (ctx->p2idx + 1 >= RPIVID_P2BUF_COUNT) ? 0 : ctx->p2idx + 1; ++ ++ // Enable the next setup if our Q isn't too big ++ if (atomic_add_return(1, &ctx->p2out) < RPIVID_P2BUF_COUNT) { ++ xtrace_fin(dev, de); ++ v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx, ++ VB2_BUF_STATE_DONE); ++ } ++ ++ rpivid_hw_irq_active2_claim(dev, &de->irq_ent, phase2_claimed, de); ++ ++ xtrace_ok(dev, de); ++ return; ++ ++fail: ++ dec_env_delete(de); ++ xtrace_fin(dev, de); ++ v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx, ++ VB2_BUF_STATE_ERROR); ++ xtrace_fail(dev, de); ++} ++ ++static void phase1_claimed(struct rpivid_dev *const dev, void *v) ++{ ++ struct rpivid_dec_env *const de = v; ++ struct rpivid_ctx *const ctx = de->ctx; ++ ++ const struct rpivid_gptr * const pu_gptr = ctx->pu_bufs + ctx->p2idx; ++ const struct rpivid_gptr * const coeff_gptr = ctx->coeff_bufs + ++ ctx->p2idx; ++ ++ xtrace_in(dev, de); ++ ++ de->pu_base_vc = pu_gptr->addr; ++ de->pu_stride = ++ ALIGN_DOWN(pu_gptr->size / de->pic_height_in_ctbs_y, 64); ++ ++ de->coeff_base_vc = coeff_gptr->addr; ++ de->coeff_stride = ++ ALIGN_DOWN(coeff_gptr->size / de->pic_height_in_ctbs_y, 64); ++ ++ apb_write_vc_addr(dev, RPI_PUWBASE, de->pu_base_vc); ++ apb_write_vc_len(dev, RPI_PUWSTRIDE, de->pu_stride); ++ apb_write_vc_addr(dev, RPI_COEFFWBASE, de->coeff_base_vc); ++ apb_write_vc_len(dev, RPI_COEFFWSTRIDE, de->coeff_stride); ++ ++ // Trigger command FIFO ++ apb_write(dev, RPI_CFNUM, de->cmd_len); ++ ++ // Claim irq ++ rpivid_hw_irq_active1_irq(dev, &de->irq_ent, cb_phase1, de); ++ ++ // And start the h/w ++ apb_write_vc_addr_final(dev, RPI_CFBASE, de->cmd_copy_gptr->addr); ++ ++ xtrace_ok(dev, de); ++} ++ ++static void dec_state_delete(struct rpivid_ctx *const ctx) ++{ ++ unsigned int i; ++ struct rpivid_dec_state *const s = ctx->state; ++ ++ if (!s) ++ return; ++ ctx->state = NULL; ++ ++ free_ps_info(s); ++ ++ for (i = 0; i != HEVC_MAX_REFS; ++i) ++ aux_q_release(ctx, &s->ref_aux[i]); ++ aux_q_release(ctx, &s->frame_aux); ++ ++ kfree(s); ++} ++ ++static void rpivid_h265_stop(struct rpivid_ctx *ctx) ++{ ++ struct rpivid_dev *const dev = ctx->dev; ++ unsigned int i; ++ ++ v4l2_info(&dev->v4l2_dev, "%s\n", __func__); ++ ++ dec_env_uninit(ctx); ++ dec_state_delete(ctx); ++ ++ // dec_env & state must be killed before this to release the buffer to ++ // the free pool ++ aux_q_uninit(ctx); ++ ++ for (i = 0; i != ARRAY_SIZE(ctx->bitbufs); ++i) ++ gptr_free(dev, ctx->bitbufs + i); ++ for (i = 0; i != ARRAY_SIZE(ctx->cmdbufs); ++i) ++ gptr_free(dev, ctx->cmdbufs + i); ++ for (i = 0; i != ARRAY_SIZE(ctx->pu_bufs); ++i) ++ gptr_free(dev, ctx->pu_bufs + i); ++ for (i = 0; i != ARRAY_SIZE(ctx->coeff_bufs); ++i) ++ gptr_free(dev, ctx->coeff_bufs + i); ++} ++ ++static int rpivid_h265_start(struct rpivid_ctx *ctx) ++{ ++ struct rpivid_dev *const dev = ctx->dev; ++ unsigned int i; ++ ++ unsigned int w = ctx->dst_fmt.width; ++ unsigned int h = ctx->dst_fmt.height; ++ unsigned int wxh; ++ size_t pu_alloc; ++ size_t coeff_alloc; ++ ++ // Generate a sanitised WxH for memory alloc ++ // Assume HD if unset ++ if (w == 0) ++ w = 1920; ++ if (w > 4096) ++ w = 4096; ++ if (h == 0) ++ w = 1088; ++ if (h > 4096) ++ h = 4096; ++ wxh = w * h; ++ ++ v4l2_info(&dev->v4l2_dev, "%s: (%dx%d)\n", __func__, ++ ctx->dst_fmt.width, ctx->dst_fmt.height); ++ ++ ctx->dec0 = NULL; ++ ctx->state = kzalloc(sizeof(*ctx->state), GFP_KERNEL); ++ if (!ctx->state) { ++ v4l2_err(&dev->v4l2_dev, "Failed to allocate decode state\n"); ++ goto fail; ++ } ++ ++ if (dec_env_init(ctx) != 0) { ++ v4l2_err(&dev->v4l2_dev, "Failed to allocate decode envs\n"); ++ goto fail; ++ } ++ ++ // 16k is plenty for most purposes but we will realloc if needed ++ for (i = 0; i != ARRAY_SIZE(ctx->cmdbufs); ++i) { ++ if (gptr_alloc(dev, ctx->cmdbufs + i, 0x4000, ++ DMA_ATTR_FORCE_CONTIGUOUS)) ++ goto fail; ++ } ++ ++ // Finger in the air PU & Coeff alloc ++ // Will be realloced if too small ++ coeff_alloc = round_up_size(wxh); ++ pu_alloc = round_up_size(wxh / 4); ++ for (i = 0; i != ARRAY_SIZE(ctx->pu_bufs); ++i) { ++ // Don't actually need a kernel mapping here ++ if (gptr_alloc(dev, ctx->pu_bufs + i, pu_alloc, ++ DMA_ATTR_FORCE_CONTIGUOUS | ++ DMA_ATTR_NO_KERNEL_MAPPING)) ++ goto fail; ++ if (gptr_alloc(dev, ctx->coeff_bufs + i, coeff_alloc, ++ DMA_ATTR_FORCE_CONTIGUOUS | ++ DMA_ATTR_NO_KERNEL_MAPPING)) ++ goto fail; ++ } ++ aux_q_init(ctx); ++ ++ return 0; ++ ++fail: ++ rpivid_h265_stop(ctx); ++ return -ENOMEM; ++} ++ ++static void rpivid_h265_trigger(struct rpivid_ctx *ctx) ++{ ++ struct rpivid_dev *const dev = ctx->dev; ++ struct rpivid_dec_env *const de = ctx->dec0; ++ ++ xtrace_in(dev, de); ++ ++ switch (!de ? RPIVID_DECODE_ERROR_CONTINUE : de->state) { ++ case RPIVID_DECODE_SLICE_START: ++ de->state = RPIVID_DECODE_SLICE_CONTINUE; ++ /* FALLTHRU */ ++ case RPIVID_DECODE_SLICE_CONTINUE: ++ v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx, ++ VB2_BUF_STATE_DONE); ++ break; ++ default: ++ v4l2_err(&dev->v4l2_dev, "%s: Unexpected state: %d\n", __func__, ++ de->state); ++ /* FALLTHRU */ ++ case RPIVID_DECODE_ERROR_DONE: ++ ctx->dec0 = NULL; ++ dec_env_delete(de); ++ /* FALLTHRU */ ++ case RPIVID_DECODE_ERROR_CONTINUE: ++ xtrace_fin(dev, de); ++ v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx, ++ VB2_BUF_STATE_ERROR); ++ break; ++ case RPIVID_DECODE_PHASE1: ++ ctx->dec0 = NULL; ++ rpivid_hw_irq_active1_claim(dev, &de->irq_ent, phase1_claimed, ++ de); ++ break; ++ } ++ ++ xtrace_ok(dev, de); ++} ++ ++struct rpivid_dec_ops rpivid_dec_ops_h265 = { ++ .setup = rpivid_h265_setup, ++ .start = rpivid_h265_start, ++ .stop = rpivid_h265_stop, ++ .trigger = rpivid_h265_trigger, ++}; +--- /dev/null ++++ b/drivers/staging/media/rpivid/rpivid_hw.c +@@ -0,0 +1,321 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Raspberry Pi HEVC driver ++ * ++ * Copyright (C) 2020 Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Cedrus VPU driver, that is: ++ * ++ * Copyright (C) 2016 Florent Revest ++ * Copyright (C) 2018 Paul Kocialkowski ++ * Copyright (C) 2018 Bootlin ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "rpivid.h" ++#include "rpivid_hw.h" ++ ++static void pre_irq(struct rpivid_dev *dev, struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback cb, void *v, ++ struct rpivid_hw_irq_ctrl *ictl) ++{ ++ unsigned long flags; ++ ++ if (ictl->irq) { ++ v4l2_err(&dev->v4l2_dev, "Attempt to claim IRQ when already claimed\n"); ++ return; ++ } ++ ++ ient->cb = cb; ++ ient->v = v; ++ ++ // Not sure this lock is actually required ++ spin_lock_irqsave(&ictl->lock, flags); ++ ictl->irq = ient; ++ spin_unlock_irqrestore(&ictl->lock, flags); ++} ++ ++static void sched_claim(struct rpivid_dev * const dev, ++ struct rpivid_hw_irq_ctrl * const ictl) ++{ ++ for (;;) { ++ struct rpivid_hw_irq_ent *ient = NULL; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ictl->lock, flags); ++ ++ if (--ictl->no_sched <= 0) { ++ ient = ictl->claim; ++ if (!ictl->irq && ient) { ++ ictl->claim = ient->next; ++ ictl->no_sched = 1; ++ } ++ } ++ ++ spin_unlock_irqrestore(&ictl->lock, flags); ++ ++ if (!ient) ++ break; ++ ++ ient->cb(dev, ient->v); ++ } ++} ++ ++/* Should only ever be called from its own IRQ cb so no lock required */ ++static void pre_thread(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback cb, void *v, ++ struct rpivid_hw_irq_ctrl *ictl) ++{ ++ ient->cb = cb; ++ ient->v = v; ++ ictl->irq = ient; ++ ictl->thread_reqed = true; ++ ictl->no_sched++; ++} ++ ++// Called in irq context ++static void do_irq(struct rpivid_dev * const dev, ++ struct rpivid_hw_irq_ctrl * const ictl) ++{ ++ struct rpivid_hw_irq_ent *ient; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&ictl->lock, flags); ++ ient = ictl->irq; ++ if (ient) { ++ ictl->no_sched++; ++ ictl->irq = NULL; ++ } ++ spin_unlock_irqrestore(&ictl->lock, flags); ++ ++ if (ient) { ++ ient->cb(dev, ient->v); ++ ++ sched_claim(dev, ictl); ++ } ++} ++ ++static void do_claim(struct rpivid_dev * const dev, ++ struct rpivid_hw_irq_ent *ient, ++ const rpivid_irq_callback cb, void * const v, ++ struct rpivid_hw_irq_ctrl * const ictl) ++{ ++ unsigned long flags; ++ ++ ient->next = NULL; ++ ient->cb = cb; ++ ient->v = v; ++ ++ spin_lock_irqsave(&ictl->lock, flags); ++ ++ if (ictl->claim) { ++ // If we have a Q then add to end ++ ictl->tail->next = ient; ++ ictl->tail = ient; ++ ient = NULL; ++ } else if (ictl->no_sched || ictl->irq) { ++ // Empty Q but other activity in progress so Q ++ ictl->claim = ient; ++ ictl->tail = ient; ++ ient = NULL; ++ } else { ++ // Nothing else going on - schedule immediately and ++ // prevent anything else scheduling claims ++ ictl->no_sched = 1; ++ } ++ ++ spin_unlock_irqrestore(&ictl->lock, flags); ++ ++ if (ient) { ++ ient->cb(dev, ient->v); ++ ++ sched_claim(dev, ictl); ++ } ++} ++ ++static void ictl_init(struct rpivid_hw_irq_ctrl * const ictl) ++{ ++ spin_lock_init(&ictl->lock); ++ ictl->claim = NULL; ++ ictl->tail = NULL; ++ ictl->irq = NULL; ++ ictl->no_sched = 0; ++} ++ ++static void ictl_uninit(struct rpivid_hw_irq_ctrl * const ictl) ++{ ++ // Nothing to do ++} ++ ++#if !OPT_DEBUG_POLL_IRQ ++static irqreturn_t rpivid_irq_irq(int irq, void *data) ++{ ++ struct rpivid_dev * const dev = data; ++ __u32 ictrl; ++ ++ ictrl = irq_read(dev, ARG_IC_ICTRL); ++ if (!(ictrl & ARG_IC_ICTRL_ALL_IRQ_MASK)) { ++ v4l2_warn(&dev->v4l2_dev, "IRQ but no IRQ bits set\n"); ++ return IRQ_NONE; ++ } ++ ++ // Cancel any/all irqs ++ irq_write(dev, ARG_IC_ICTRL, ictrl & ~ARG_IC_ICTRL_SET_ZERO_MASK); ++ ++ // Service Active2 before Active1 so Phase 1 can transition to Phase 2 ++ // without delay ++ if (ictrl & ARG_IC_ICTRL_ACTIVE2_INT_SET) ++ do_irq(dev, &dev->ic_active2); ++ if (ictrl & ARG_IC_ICTRL_ACTIVE1_INT_SET) ++ do_irq(dev, &dev->ic_active1); ++ ++ return dev->ic_active1.thread_reqed || dev->ic_active2.thread_reqed ? ++ IRQ_WAKE_THREAD : IRQ_HANDLED; ++} ++ ++static void do_thread(struct rpivid_dev * const dev, ++ struct rpivid_hw_irq_ctrl *const ictl) ++{ ++ unsigned long flags; ++ struct rpivid_hw_irq_ent *ient = NULL; ++ ++ spin_lock_irqsave(&ictl->lock, flags); ++ ++ if (ictl->thread_reqed) { ++ ient = ictl->irq; ++ ictl->thread_reqed = false; ++ ictl->irq = NULL; ++ } ++ ++ spin_unlock_irqrestore(&ictl->lock, flags); ++ ++ if (ient) { ++ ient->cb(dev, ient->v); ++ ++ sched_claim(dev, ictl); ++ } ++} ++ ++static irqreturn_t rpivid_irq_thread(int irq, void *data) ++{ ++ struct rpivid_dev * const dev = data; ++ ++ do_thread(dev, &dev->ic_active1); ++ do_thread(dev, &dev->ic_active2); ++ ++ return IRQ_HANDLED; ++} ++#endif ++ ++/* May only be called from Active1 CB ++ * IRQs should not be expected until execution continues in the cb ++ */ ++void rpivid_hw_irq_active1_thread(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback thread_cb, void *ctx) ++{ ++ pre_thread(dev, ient, thread_cb, ctx, &dev->ic_active1); ++} ++ ++void rpivid_hw_irq_active1_claim(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback ready_cb, void *ctx) ++{ ++ do_claim(dev, ient, ready_cb, ctx, &dev->ic_active1); ++} ++ ++void rpivid_hw_irq_active1_irq(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback irq_cb, void *ctx) ++{ ++ pre_irq(dev, ient, irq_cb, ctx, &dev->ic_active1); ++} ++ ++void rpivid_hw_irq_active2_claim(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback ready_cb, void *ctx) ++{ ++ do_claim(dev, ient, ready_cb, ctx, &dev->ic_active2); ++} ++ ++void rpivid_hw_irq_active2_irq(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback irq_cb, void *ctx) ++{ ++ pre_irq(dev, ient, irq_cb, ctx, &dev->ic_active2); ++} ++ ++int rpivid_hw_probe(struct rpivid_dev *dev) ++{ ++ struct resource *res; ++ __u32 irq_stat; ++ int irq_dec; ++ int ret = 0; ++ ++ ictl_init(&dev->ic_active1); ++ ictl_init(&dev->ic_active2); ++ ++ res = platform_get_resource_byname(dev->pdev, IORESOURCE_MEM, "intc"); ++ if (!res) ++ return -ENODEV; ++ ++ dev->base_irq = devm_ioremap(dev->dev, res->start, resource_size(res)); ++ if (IS_ERR(dev->base_irq)) ++ return PTR_ERR(dev->base_irq); ++ ++ res = platform_get_resource_byname(dev->pdev, IORESOURCE_MEM, "hevc"); ++ if (!res) ++ return -ENODEV; ++ ++ dev->base_h265 = devm_ioremap(dev->dev, res->start, resource_size(res)); ++ if (IS_ERR(dev->base_h265)) ++ return PTR_ERR(dev->base_h265); ++ ++ dev->clock = devm_clk_get(&dev->pdev->dev, "hevc"); ++ if (IS_ERR(dev->clock)) ++ return PTR_ERR(dev->clock); ++ ++ // Disable IRQs & reset anything pending ++ irq_write(dev, 0, ++ ARG_IC_ICTRL_ACTIVE1_EN_SET | ARG_IC_ICTRL_ACTIVE2_EN_SET); ++ irq_stat = irq_read(dev, 0); ++ irq_write(dev, 0, irq_stat); ++ ++#if !OPT_DEBUG_POLL_IRQ ++ irq_dec = platform_get_irq(dev->pdev, 0); ++ if (irq_dec <= 0) ++ return irq_dec; ++ ret = devm_request_threaded_irq(dev->dev, irq_dec, ++ rpivid_irq_irq, ++ rpivid_irq_thread, ++ 0, dev_name(dev->dev), dev); ++ if (ret) { ++ dev_err(dev->dev, "Failed to request IRQ - %d\n", ret); ++ ++ return ret; ++ } ++#endif ++ return ret; ++} ++ ++void rpivid_hw_remove(struct rpivid_dev *dev) ++{ ++ // IRQ auto freed on unload so no need to do it here ++ ictl_uninit(&dev->ic_active1); ++ ictl_uninit(&dev->ic_active2); ++} ++ +--- /dev/null ++++ b/drivers/staging/media/rpivid/rpivid_hw.h +@@ -0,0 +1,300 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Raspberry Pi HEVC driver ++ * ++ * Copyright (C) 2020 Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Cedrus VPU driver, that is: ++ * ++ * Copyright (C) 2016 Florent Revest ++ * Copyright (C) 2018 Paul Kocialkowski ++ * Copyright (C) 2018 Bootlin ++ */ ++ ++#ifndef _RPIVID_HW_H_ ++#define _RPIVID_HW_H_ ++ ++struct rpivid_hw_irq_ent { ++ struct rpivid_hw_irq_ent *next; ++ rpivid_irq_callback cb; ++ void *v; ++}; ++ ++/* Phase 1 Register offsets */ ++ ++#define RPI_SPS0 0 ++#define RPI_SPS1 4 ++#define RPI_PPS 8 ++#define RPI_SLICE 12 ++#define RPI_TILESTART 16 ++#define RPI_TILEEND 20 ++#define RPI_SLICESTART 24 ++#define RPI_MODE 28 ++#define RPI_LEFT0 32 ++#define RPI_LEFT1 36 ++#define RPI_LEFT2 40 ++#define RPI_LEFT3 44 ++#define RPI_QP 48 ++#define RPI_CONTROL 52 ++#define RPI_STATUS 56 ++#define RPI_VERSION 60 ++#define RPI_BFBASE 64 ++#define RPI_BFNUM 68 ++#define RPI_BFCONTROL 72 ++#define RPI_BFSTATUS 76 ++#define RPI_PUWBASE 80 ++#define RPI_PUWSTRIDE 84 ++#define RPI_COEFFWBASE 88 ++#define RPI_COEFFWSTRIDE 92 ++#define RPI_SLICECMDS 96 ++#define RPI_BEGINTILEEND 100 ++#define RPI_TRANSFER 104 ++#define RPI_CFBASE 108 ++#define RPI_CFNUM 112 ++#define RPI_CFSTATUS 116 ++ ++/* Phase 2 Register offsets */ ++ ++#define RPI_PURBASE 0x8000 ++#define RPI_PURSTRIDE 0x8004 ++#define RPI_COEFFRBASE 0x8008 ++#define RPI_COEFFRSTRIDE 0x800C ++#define RPI_NUMROWS 0x8010 ++#define RPI_CONFIG2 0x8014 ++#define RPI_OUTYBASE 0x8018 ++#define RPI_OUTYSTRIDE 0x801C ++#define RPI_OUTCBASE 0x8020 ++#define RPI_OUTCSTRIDE 0x8024 ++#define RPI_STATUS2 0x8028 ++#define RPI_FRAMESIZE 0x802C ++#define RPI_MVBASE 0x8030 ++#define RPI_MVSTRIDE 0x8034 ++#define RPI_COLBASE 0x8038 ++#define RPI_COLSTRIDE 0x803C ++#define RPI_CURRPOC 0x8040 ++ ++/* ++ * Write a general register value ++ * Order is unimportant ++ */ ++static inline void apb_write(const struct rpivid_dev * const dev, ++ const unsigned int offset, const u32 val) ++{ ++ writel_relaxed(val, dev->base_h265 + offset); ++} ++ ++/* Write the final register value that actually starts the phase */ ++static inline void apb_write_final(const struct rpivid_dev * const dev, ++ const unsigned int offset, const u32 val) ++{ ++ writel(val, dev->base_h265 + offset); ++} ++ ++static inline u32 apb_read(const struct rpivid_dev * const dev, ++ const unsigned int offset) ++{ ++ return readl(dev->base_h265 + offset); ++} ++ ++static inline void irq_write(const struct rpivid_dev * const dev, ++ const unsigned int offset, const u32 val) ++{ ++ writel(val, dev->base_irq + offset); ++} ++ ++static inline u32 irq_read(const struct rpivid_dev * const dev, ++ const unsigned int offset) ++{ ++ return readl(dev->base_irq + offset); ++} ++ ++static inline void apb_write_vc_addr(const struct rpivid_dev * const dev, ++ const unsigned int offset, ++ const dma_addr_t a) ++{ ++ apb_write(dev, offset, (u32)(a >> 6)); ++} ++ ++static inline void apb_write_vc_addr_final(const struct rpivid_dev * const dev, ++ const unsigned int offset, ++ const dma_addr_t a) ++{ ++ apb_write_final(dev, offset, (u32)(a >> 6)); ++} ++ ++static inline void apb_write_vc_len(const struct rpivid_dev * const dev, ++ const unsigned int offset, ++ const unsigned int x) ++{ ++ apb_write(dev, offset, (x + 63) >> 6); ++} ++ ++/* *ARG_IC_ICTRL - Interrupt control for ARGON Core* ++ * Offset (byte space) = 40'h2b10000 ++ * Physical Address (byte space) = 40'h7eb10000 ++ * Verilog Macro Address = `ARG_IC_REG_START + `ARGON_INTCTRL_ICTRL ++ * Reset Value = 32'b100x100x_100xxxxx_xxxxxxx0_x100x100 ++ * Access = RW (32-bit only) ++ * Interrupt control logic for ARGON Core. ++ */ ++#define ARG_IC_ICTRL 0 ++ ++/* acc=LWC ACTIVE1_INT FIELD ACCESS: LWC ++ * ++ * Interrupt 1 ++ * This is set and held when an hevc_active1 interrupt edge is detected ++ * The polarity of the edge is set by the ACTIVE1_EDGE field ++ * Write a 1 to this bit to clear down the latched interrupt ++ * The latched interrupt is only enabled out onto the interrupt line if ++ * ACTIVE1_EN is set ++ * Reset value is *0* decimal. ++ */ ++#define ARG_IC_ICTRL_ACTIVE1_INT_SET BIT(0) ++ ++/* ACTIVE1_EDGE Sets the polarity of the interrupt edge detection logic ++ * This logic detects edges of the hevc_active1 line from the argon core ++ * 0 = negedge, 1 = posedge ++ * Reset value is *0* decimal. ++ */ ++#define ARG_IC_ICTRL_ACTIVE1_EDGE_SET BIT(1) ++ ++/* ACTIVE1_EN Enables ACTIVE1_INT out onto the argon interrupt line. ++ * If this isn't set, the interrupt logic will work but no interrupt will be ++ * set to the interrupt controller ++ * Reset value is *1* decimal. ++ * ++ * [JC] The above appears to be a lie - if unset then b0 is never set ++ */ ++#define ARG_IC_ICTRL_ACTIVE1_EN_SET BIT(2) ++ ++/* acc=RO ACTIVE1_STATUS FIELD ACCESS: RO ++ * ++ * The current status of the hevc_active1 signal ++ */ ++#define ARG_IC_ICTRL_ACTIVE1_STATUS_SET BIT(3) ++ ++/* acc=LWC ACTIVE2_INT FIELD ACCESS: LWC ++ * ++ * Interrupt 2 ++ * This is set and held when an hevc_active2 interrupt edge is detected ++ * The polarity of the edge is set by the ACTIVE2_EDGE field ++ * Write a 1 to this bit to clear down the latched interrupt ++ * The latched interrupt is only enabled out onto the interrupt line if ++ * ACTIVE2_EN is set ++ * Reset value is *0* decimal. ++ */ ++#define ARG_IC_ICTRL_ACTIVE2_INT_SET BIT(4) ++ ++/* ACTIVE2_EDGE Sets the polarity of the interrupt edge detection logic ++ * This logic detects edges of the hevc_active2 line from the argon core ++ * 0 = negedge, 1 = posedge ++ * Reset value is *0* decimal. ++ */ ++#define ARG_IC_ICTRL_ACTIVE2_EDGE_SET BIT(5) ++ ++/* ACTIVE2_EN Enables ACTIVE2_INT out onto the argon interrupt line. ++ * If this isn't set, the interrupt logic will work but no interrupt will be ++ * set to the interrupt controller ++ * Reset value is *1* decimal. ++ */ ++#define ARG_IC_ICTRL_ACTIVE2_EN_SET BIT(6) ++ ++/* acc=RO ACTIVE2_STATUS FIELD ACCESS: RO ++ * ++ * The current status of the hevc_active2 signal ++ */ ++#define ARG_IC_ICTRL_ACTIVE2_STATUS_SET BIT(7) ++ ++/* TEST_INT Forces the argon int high for test purposes. ++ * Reset value is *0* decimal. ++ */ ++#define ARG_IC_ICTRL_TEST_INT BIT(8) ++#define ARG_IC_ICTRL_SPARE BIT(9) ++ ++/* acc=RO VP9_INTERRUPT_STATUS FIELD ACCESS: RO ++ * ++ * The current status of the vp9_interrupt signal ++ */ ++#define ARG_IC_ICTRL_VP9_INTERRUPT_STATUS BIT(10) ++ ++/* AIO_INT_ENABLE 1 = Or the AIO int in with the Argon int so the VPU can see ++ * it ++ * 0 = the AIO int is masked. (It should still be connected to the GIC though). ++ */ ++#define ARG_IC_ICTRL_AIO_INT_ENABLE BIT(20) ++#define ARG_IC_ICTRL_H264_ACTIVE_INT BIT(21) ++#define ARG_IC_ICTRL_H264_ACTIVE_EDGE BIT(22) ++#define ARG_IC_ICTRL_H264_ACTIVE_EN BIT(23) ++#define ARG_IC_ICTRL_H264_ACTIVE_STATUS BIT(24) ++#define ARG_IC_ICTRL_H264_INTERRUPT_INT BIT(25) ++#define ARG_IC_ICTRL_H264_INTERRUPT_EDGE BIT(26) ++#define ARG_IC_ICTRL_H264_INTERRUPT_EN BIT(27) ++ ++/* acc=RO H264_INTERRUPT_STATUS FIELD ACCESS: RO ++ * ++ * The current status of the h264_interrupt signal ++ */ ++#define ARG_IC_ICTRL_H264_INTERRUPT_STATUS BIT(28) ++ ++/* acc=LWC VP9_INTERRUPT_INT FIELD ACCESS: LWC ++ * ++ * Interrupt 1 ++ * This is set and held when an vp9_interrupt interrupt edge is detected ++ * The polarity of the edge is set by the VP9_INTERRUPT_EDGE field ++ * Write a 1 to this bit to clear down the latched interrupt ++ * The latched interrupt is only enabled out onto the interrupt line if ++ * VP9_INTERRUPT_EN is set ++ * Reset value is *0* decimal. ++ */ ++#define ARG_IC_ICTRL_VP9_INTERRUPT_INT BIT(29) ++ ++/* VP9_INTERRUPT_EDGE Sets the polarity of the interrupt edge detection logic ++ * This logic detects edges of the vp9_interrupt line from the argon h264 core ++ * 0 = negedge, 1 = posedge ++ * Reset value is *0* decimal. ++ */ ++#define ARG_IC_ICTRL_VP9_INTERRUPT_EDGE BIT(30) ++ ++/* VP9_INTERRUPT_EN Enables VP9_INTERRUPT_INT out onto the argon interrupt line. ++ * If this isn't set, the interrupt logic will work but no interrupt will be ++ * set to the interrupt controller ++ * Reset value is *1* decimal. ++ */ ++#define ARG_IC_ICTRL_VP9_INTERRUPT_EN BIT(31) ++ ++/* Bits 19:12, 11 reserved - read ?, write 0 */ ++#define ARG_IC_ICTRL_SET_ZERO_MASK ((0xff << 12) | BIT(11)) ++ ++/* All IRQ bits */ ++#define ARG_IC_ICTRL_ALL_IRQ_MASK (\ ++ ARG_IC_ICTRL_VP9_INTERRUPT_INT |\ ++ ARG_IC_ICTRL_H264_INTERRUPT_INT |\ ++ ARG_IC_ICTRL_ACTIVE1_INT_SET |\ ++ ARG_IC_ICTRL_ACTIVE2_INT_SET) ++ ++/* Auto release once all CBs called */ ++void rpivid_hw_irq_active1_claim(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback ready_cb, void *ctx); ++/* May only be called in claim cb */ ++void rpivid_hw_irq_active1_irq(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback irq_cb, void *ctx); ++/* May only be called in irq cb */ ++void rpivid_hw_irq_active1_thread(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback thread_cb, void *ctx); ++ ++/* Auto release once all CBs called */ ++void rpivid_hw_irq_active2_claim(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback ready_cb, void *ctx); ++/* May only be called in claim cb */ ++void rpivid_hw_irq_active2_irq(struct rpivid_dev *dev, ++ struct rpivid_hw_irq_ent *ient, ++ rpivid_irq_callback irq_cb, void *ctx); ++ ++int rpivid_hw_probe(struct rpivid_dev *dev); ++void rpivid_hw_remove(struct rpivid_dev *dev); ++ ++#endif +--- /dev/null ++++ b/drivers/staging/media/rpivid/rpivid_video.c +@@ -0,0 +1,593 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Raspberry Pi HEVC driver ++ * ++ * Copyright (C) 2020 Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Cedrus VPU driver, that is: ++ * ++ * Copyright (C) 2016 Florent Revest ++ * Copyright (C) 2018 Paul Kocialkowski ++ * Copyright (C) 2018 Bootlin ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "rpivid.h" ++#include "rpivid_video.h" ++#include "rpivid_dec.h" ++ ++#define RPIVID_DECODE_SRC BIT(0) ++#define RPIVID_DECODE_DST BIT(1) ++ ++#define RPIVID_MIN_WIDTH 16U ++#define RPIVID_MIN_HEIGHT 16U ++#define RPIVID_MAX_WIDTH 4096U ++#define RPIVID_MAX_HEIGHT 4096U ++ ++static inline struct rpivid_ctx *rpivid_file2ctx(struct file *file) ++{ ++ return container_of(file->private_data, struct rpivid_ctx, fh); ++} ++ ++/* constrain x to y,y*2 */ ++static inline unsigned int constrain2x(unsigned int x, unsigned int y) ++{ ++ return (x < y) ? ++ y : ++ (x > y * 2) ? y : x; ++} ++ ++int rpivid_prepare_src_format(struct v4l2_pix_format *pix_fmt) ++{ ++ if (pix_fmt->pixelformat != V4L2_PIX_FMT_HEVC_SLICE) ++ return -EINVAL; ++ ++ /* Zero bytes per line for encoded source. */ ++ pix_fmt->bytesperline = 0; ++ /* Choose some minimum size since this can't be 0 */ ++ pix_fmt->sizeimage = max_t(u32, SZ_1K, pix_fmt->sizeimage); ++ pix_fmt->field = V4L2_FIELD_NONE; ++ return 0; ++} ++ ++int rpivid_prepare_dst_format(struct v4l2_pix_format *pix_fmt) ++{ ++ unsigned int width = pix_fmt->width; ++ unsigned int height = pix_fmt->height; ++ unsigned int sizeimage = pix_fmt->sizeimage; ++ unsigned int bytesperline = pix_fmt->bytesperline; ++ ++ switch (pix_fmt->pixelformat) { ++ /* For column formats set bytesperline to column height (stride2) */ ++ case V4L2_PIX_FMT_NV12_COL128: ++ /* Width rounds up to columns */ ++ width = ALIGN(min(width, RPIVID_MAX_WIDTH), 128); ++ ++ /* 16 aligned height - not sure we even need that */ ++ height = ALIGN(height, 16); ++ /* column height ++ * Accept suggested shape if at least min & < 2 * min ++ */ ++ bytesperline = constrain2x(bytesperline, height * 3 / 2); ++ ++ /* image size ++ * Again allow plausible variation in case added padding is ++ * required ++ */ ++ sizeimage = constrain2x(sizeimage, bytesperline * width); ++ break; ++ ++ case V4L2_PIX_FMT_NV12_10_COL128: ++ /* width in pixels (3 pels = 4 bytes) rounded to 128 byte ++ * columns ++ */ ++ width = ALIGN(((min(width, RPIVID_MAX_WIDTH) + 2) / 3), 32) * 3; ++ ++ /* 16-aligned height. */ ++ height = ALIGN(height, 16); ++ ++ /* column height ++ * Accept suggested shape if at least min & < 2 * min ++ */ ++ bytesperline = constrain2x(bytesperline, height * 3 / 2); ++ ++ /* image size ++ * Again allow plausible variation in case added padding is ++ * required ++ */ ++ sizeimage = constrain2x(sizeimage, ++ bytesperline * width * 4 / 3); ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ pix_fmt->width = width; ++ pix_fmt->height = height; ++ ++ pix_fmt->field = V4L2_FIELD_NONE; ++ pix_fmt->bytesperline = bytesperline; ++ pix_fmt->sizeimage = sizeimage; ++ return 0; ++} ++ ++static int rpivid_querycap(struct file *file, void *priv, ++ struct v4l2_capability *cap) ++{ ++ strscpy(cap->driver, RPIVID_NAME, sizeof(cap->driver)); ++ strscpy(cap->card, RPIVID_NAME, sizeof(cap->card)); ++ snprintf(cap->bus_info, sizeof(cap->bus_info), ++ "platform:%s", RPIVID_NAME); ++ ++ return 0; ++} ++ ++static int rpivid_enum_fmt_vid_out(struct file *file, void *priv, ++ struct v4l2_fmtdesc *f) ++{ ++ // Input formats ++ ++ // H.265 Slice only currently ++ if (f->index == 0) { ++ f->pixelformat = V4L2_PIX_FMT_HEVC_SLICE; ++ return 0; ++ } ++ ++ return -EINVAL; ++} ++ ++static int rpivid_hevc_validate_sps(const struct v4l2_ctrl_hevc_sps * const sps) ++{ ++ const unsigned int ctb_log2_size_y = ++ sps->log2_min_luma_coding_block_size_minus3 + 3 + ++ sps->log2_diff_max_min_luma_coding_block_size; ++ const unsigned int min_tb_log2_size_y = ++ sps->log2_min_luma_transform_block_size_minus2 + 2; ++ const unsigned int max_tb_log2_size_y = min_tb_log2_size_y + ++ sps->log2_diff_max_min_luma_transform_block_size; ++ ++ /* Local limitations */ ++ if (sps->pic_width_in_luma_samples < 32 || ++ sps->pic_width_in_luma_samples > 4096) ++ return 0; ++ if (sps->pic_height_in_luma_samples < 32 || ++ sps->pic_height_in_luma_samples > 4096) ++ return 0; ++ if (!(sps->bit_depth_luma_minus8 == 0 || ++ sps->bit_depth_luma_minus8 == 2)) ++ return 0; ++ if (sps->bit_depth_luma_minus8 != sps->bit_depth_chroma_minus8) ++ return 0; ++ if (sps->chroma_format_idc != 1) ++ return 0; ++ ++ /* Limits from H.265 7.4.3.2.1 */ ++ if (sps->log2_max_pic_order_cnt_lsb_minus4 > 12) ++ return 0; ++ if (sps->sps_max_dec_pic_buffering_minus1 > 15) ++ return 0; ++ if (sps->sps_max_num_reorder_pics > ++ sps->sps_max_dec_pic_buffering_minus1) ++ return 0; ++ if (ctb_log2_size_y > 6) ++ return 0; ++ if (max_tb_log2_size_y > 5) ++ return 0; ++ if (max_tb_log2_size_y > ctb_log2_size_y) ++ return 0; ++ if (sps->max_transform_hierarchy_depth_inter > ++ (ctb_log2_size_y - min_tb_log2_size_y)) ++ return 0; ++ if (sps->max_transform_hierarchy_depth_intra > ++ (ctb_log2_size_y - min_tb_log2_size_y)) ++ return 0; ++ /* Check pcm stuff */ ++ if (sps->num_short_term_ref_pic_sets > 64) ++ return 0; ++ if (sps->num_long_term_ref_pics_sps > 32) ++ return 0; ++ return 1; ++} ++ ++static inline int is_sps_set(const struct v4l2_ctrl_hevc_sps * const sps) ++{ ++ return sps && sps->pic_width_in_luma_samples != 0; ++} ++ ++static u32 pixelformat_from_sps(const struct v4l2_ctrl_hevc_sps * const sps, ++ const int index) ++{ ++ u32 pf = 0; ++ ++ // Use width 0 as a signifier of unsetness ++ if (!is_sps_set(sps)) { ++ /* Treat this as an error? For now return both */ ++ if (index == 0) ++ pf = V4L2_PIX_FMT_NV12_COL128; ++ else if (index == 1) ++ pf = V4L2_PIX_FMT_NV12_10_COL128; ++ } else if (index == 0 && rpivid_hevc_validate_sps(sps)) { ++ if (sps->bit_depth_luma_minus8 == 0) ++ pf = V4L2_PIX_FMT_NV12_COL128; ++ else if (sps->bit_depth_luma_minus8 == 2) ++ pf = V4L2_PIX_FMT_NV12_10_COL128; ++ } ++ ++ return pf; ++} ++ ++static struct v4l2_pix_format ++rpivid_hevc_default_dst_fmt(struct rpivid_ctx * const ctx) ++{ ++ const struct v4l2_ctrl_hevc_sps * const sps = ++ rpivid_find_control_data(ctx, V4L2_CID_MPEG_VIDEO_HEVC_SPS); ++ struct v4l2_pix_format pix_fmt = { ++ .width = sps->pic_width_in_luma_samples, ++ .height = sps->pic_height_in_luma_samples, ++ .pixelformat = pixelformat_from_sps(sps, 0) ++ }; ++ ++ rpivid_prepare_dst_format(&pix_fmt); ++ return pix_fmt; ++} ++ ++static u32 rpivid_hevc_get_dst_pixelformat(struct rpivid_ctx * const ctx, ++ const int index) ++{ ++ const struct v4l2_ctrl_hevc_sps * const sps = ++ rpivid_find_control_data(ctx, V4L2_CID_MPEG_VIDEO_HEVC_SPS); ++ ++ return pixelformat_from_sps(sps, index); ++} ++ ++static int rpivid_enum_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_fmtdesc *f) ++{ ++ struct rpivid_ctx * const ctx = rpivid_file2ctx(file); ++ ++ const u32 pf = rpivid_hevc_get_dst_pixelformat(ctx, f->index); ++ ++ if (pf == 0) ++ return -EINVAL; ++ ++ f->pixelformat = pf; ++ return 0; ++} ++ ++static int rpivid_g_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct rpivid_ctx *ctx = rpivid_file2ctx(file); ++ ++ if (!ctx->dst_fmt_set) ++ ctx->dst_fmt = rpivid_hevc_default_dst_fmt(ctx); ++ f->fmt.pix = ctx->dst_fmt; ++ return 0; ++} ++ ++static int rpivid_g_fmt_vid_out(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct rpivid_ctx *ctx = rpivid_file2ctx(file); ++ ++ f->fmt.pix = ctx->src_fmt; ++ return 0; ++} ++ ++static inline void copy_color(struct v4l2_pix_format *d, ++ const struct v4l2_pix_format *s) ++{ ++ d->colorspace = s->colorspace; ++ d->xfer_func = s->xfer_func; ++ d->ycbcr_enc = s->ycbcr_enc; ++ d->quantization = s->quantization; ++} ++ ++static int rpivid_try_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct rpivid_ctx *ctx = rpivid_file2ctx(file); ++ const struct v4l2_ctrl_hevc_sps * const sps = ++ rpivid_find_control_data(ctx, V4L2_CID_MPEG_VIDEO_HEVC_SPS); ++ u32 pixelformat; ++ int i; ++ ++ /* Reject format types we don't support */ ++ if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ++ return -EINVAL; ++ ++ for (i = 0; (pixelformat = pixelformat_from_sps(sps, i)) != 0; i++) { ++ if (f->fmt.pix.pixelformat == pixelformat) ++ break; ++ } ++ ++ // If we can't use requested fmt then set to default ++ if (pixelformat == 0) { ++ pixelformat = pixelformat_from_sps(sps, 0); ++ // If we don't have a default then give up ++ if (pixelformat == 0) ++ return -EINVAL; ++ } ++ ++ // We don't have any way of finding out colourspace so believe ++ // anything we are told - take anything set in src as a default ++ if (f->fmt.pix.colorspace == V4L2_COLORSPACE_DEFAULT) ++ copy_color(&f->fmt.pix, &ctx->src_fmt); ++ ++ f->fmt.pix.pixelformat = pixelformat; ++ return rpivid_prepare_dst_format(&f->fmt.pix); ++} ++ ++static int rpivid_try_fmt_vid_out(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ if (f->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) ++ return -EINVAL; ++ ++ if (rpivid_prepare_src_format(&f->fmt.pix)) { ++ // Set default src format ++ f->fmt.pix.pixelformat = RPIVID_SRC_PIXELFORMAT_DEFAULT; ++ rpivid_prepare_src_format(&f->fmt.pix); ++ } ++ return 0; ++} ++ ++static int rpivid_s_fmt_vid_cap(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct rpivid_ctx *ctx = rpivid_file2ctx(file); ++ struct vb2_queue *vq; ++ int ret; ++ ++ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); ++ if (vb2_is_busy(vq)) ++ return -EBUSY; ++ ++ ret = rpivid_try_fmt_vid_cap(file, priv, f); ++ if (ret) ++ return ret; ++ ++ ctx->dst_fmt = f->fmt.pix; ++ ctx->dst_fmt_set = 1; ++ ++ return 0; ++} ++ ++static int rpivid_s_fmt_vid_out(struct file *file, void *priv, ++ struct v4l2_format *f) ++{ ++ struct rpivid_ctx *ctx = rpivid_file2ctx(file); ++ struct vb2_queue *vq; ++ int ret; ++ ++ vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type); ++ if (vb2_is_busy(vq)) ++ return -EBUSY; ++ ++ ret = rpivid_try_fmt_vid_out(file, priv, f); ++ if (ret) ++ return ret; ++ ++ ctx->src_fmt = f->fmt.pix; ++ ctx->dst_fmt_set = 0; // Setting src invalidates dst ++ ++ vq->subsystem_flags |= ++ VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF; ++ ++ /* Propagate colorspace information to capture. */ ++ copy_color(&ctx->dst_fmt, &f->fmt.pix); ++ return 0; ++} ++ ++const struct v4l2_ioctl_ops rpivid_ioctl_ops = { ++ .vidioc_querycap = rpivid_querycap, ++ ++ .vidioc_enum_fmt_vid_cap = rpivid_enum_fmt_vid_cap, ++ .vidioc_g_fmt_vid_cap = rpivid_g_fmt_vid_cap, ++ .vidioc_try_fmt_vid_cap = rpivid_try_fmt_vid_cap, ++ .vidioc_s_fmt_vid_cap = rpivid_s_fmt_vid_cap, ++ ++ .vidioc_enum_fmt_vid_out = rpivid_enum_fmt_vid_out, ++ .vidioc_g_fmt_vid_out = rpivid_g_fmt_vid_out, ++ .vidioc_try_fmt_vid_out = rpivid_try_fmt_vid_out, ++ .vidioc_s_fmt_vid_out = rpivid_s_fmt_vid_out, ++ ++ .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs, ++ .vidioc_querybuf = v4l2_m2m_ioctl_querybuf, ++ .vidioc_qbuf = v4l2_m2m_ioctl_qbuf, ++ .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf, ++ .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf, ++ .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs, ++ .vidioc_expbuf = v4l2_m2m_ioctl_expbuf, ++ ++ .vidioc_streamon = v4l2_m2m_ioctl_streamon, ++ .vidioc_streamoff = v4l2_m2m_ioctl_streamoff, ++ ++ .vidioc_try_decoder_cmd = v4l2_m2m_ioctl_stateless_try_decoder_cmd, ++ .vidioc_decoder_cmd = v4l2_m2m_ioctl_stateless_decoder_cmd, ++ ++ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, ++ .vidioc_unsubscribe_event = v4l2_event_unsubscribe, ++}; ++ ++static int rpivid_queue_setup(struct vb2_queue *vq, unsigned int *nbufs, ++ unsigned int *nplanes, unsigned int sizes[], ++ struct device *alloc_devs[]) ++{ ++ struct rpivid_ctx *ctx = vb2_get_drv_priv(vq); ++ struct v4l2_pix_format *pix_fmt; ++ ++ if (V4L2_TYPE_IS_OUTPUT(vq->type)) ++ pix_fmt = &ctx->src_fmt; ++ else ++ pix_fmt = &ctx->dst_fmt; ++ ++ if (*nplanes) { ++ if (sizes[0] < pix_fmt->sizeimage) ++ return -EINVAL; ++ } else { ++ sizes[0] = pix_fmt->sizeimage; ++ *nplanes = 1; ++ } ++ ++ return 0; ++} ++ ++static void rpivid_queue_cleanup(struct vb2_queue *vq, u32 state) ++{ ++ struct rpivid_ctx *ctx = vb2_get_drv_priv(vq); ++ struct vb2_v4l2_buffer *vbuf; ++ ++ for (;;) { ++ if (V4L2_TYPE_IS_OUTPUT(vq->type)) ++ vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx); ++ else ++ vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx); ++ ++ if (!vbuf) ++ return; ++ ++ v4l2_ctrl_request_complete(vbuf->vb2_buf.req_obj.req, ++ &ctx->hdl); ++ v4l2_m2m_buf_done(vbuf, state); ++ } ++} ++ ++static int rpivid_buf_out_validate(struct vb2_buffer *vb) ++{ ++ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); ++ ++ vbuf->field = V4L2_FIELD_NONE; ++ return 0; ++} ++ ++static int rpivid_buf_prepare(struct vb2_buffer *vb) ++{ ++ struct vb2_queue *vq = vb->vb2_queue; ++ struct rpivid_ctx *ctx = vb2_get_drv_priv(vq); ++ struct v4l2_pix_format *pix_fmt; ++ ++ if (V4L2_TYPE_IS_OUTPUT(vq->type)) ++ pix_fmt = &ctx->src_fmt; ++ else ++ pix_fmt = &ctx->dst_fmt; ++ ++ if (vb2_plane_size(vb, 0) < pix_fmt->sizeimage) ++ return -EINVAL; ++ ++ vb2_set_plane_payload(vb, 0, pix_fmt->sizeimage); ++ ++ return 0; ++} ++ ++static int rpivid_start_streaming(struct vb2_queue *vq, unsigned int count) ++{ ++ struct rpivid_ctx *ctx = vb2_get_drv_priv(vq); ++ struct rpivid_dev *dev = ctx->dev; ++ int ret = 0; ++ ++ if (ctx->src_fmt.pixelformat != V4L2_PIX_FMT_HEVC_SLICE) ++ return -EINVAL; ++ ++ if (V4L2_TYPE_IS_OUTPUT(vq->type) && dev->dec_ops->start) ++ ret = dev->dec_ops->start(ctx); ++ ++ ret = clk_set_rate(dev->clock, 500 * 1000 * 1000); ++ if (ret) { ++ dev_err(dev->dev, "Failed to set clock rate\n"); ++ goto out; ++ } ++ ++ ret = clk_prepare_enable(dev->clock); ++ if (ret) ++ dev_err(dev->dev, "Failed to enable clock\n"); ++ ++out: ++ if (ret) ++ rpivid_queue_cleanup(vq, VB2_BUF_STATE_QUEUED); ++ ++ return ret; ++} ++ ++static void rpivid_stop_streaming(struct vb2_queue *vq) ++{ ++ struct rpivid_ctx *ctx = vb2_get_drv_priv(vq); ++ struct rpivid_dev *dev = ctx->dev; ++ ++ if (V4L2_TYPE_IS_OUTPUT(vq->type) && dev->dec_ops->stop) ++ dev->dec_ops->stop(ctx); ++ ++ rpivid_queue_cleanup(vq, VB2_BUF_STATE_ERROR); ++ ++ clk_disable_unprepare(dev->clock); ++} ++ ++static void rpivid_buf_queue(struct vb2_buffer *vb) ++{ ++ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); ++ struct rpivid_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); ++ ++ v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf); ++} ++ ++static void rpivid_buf_request_complete(struct vb2_buffer *vb) ++{ ++ struct rpivid_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); ++ ++ v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->hdl); ++} ++ ++static struct vb2_ops rpivid_qops = { ++ .queue_setup = rpivid_queue_setup, ++ .buf_prepare = rpivid_buf_prepare, ++ .buf_queue = rpivid_buf_queue, ++ .buf_out_validate = rpivid_buf_out_validate, ++ .buf_request_complete = rpivid_buf_request_complete, ++ .start_streaming = rpivid_start_streaming, ++ .stop_streaming = rpivid_stop_streaming, ++ .wait_prepare = vb2_ops_wait_prepare, ++ .wait_finish = vb2_ops_wait_finish, ++}; ++ ++int rpivid_queue_init(void *priv, struct vb2_queue *src_vq, ++ struct vb2_queue *dst_vq) ++{ ++ struct rpivid_ctx *ctx = priv; ++ int ret; ++ ++ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; ++ src_vq->io_modes = VB2_MMAP | VB2_DMABUF; ++ src_vq->drv_priv = ctx; ++ src_vq->buf_struct_size = sizeof(struct rpivid_buffer); ++ src_vq->min_buffers_needed = 1; ++ src_vq->ops = &rpivid_qops; ++ src_vq->mem_ops = &vb2_dma_contig_memops; ++ src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; ++ src_vq->lock = &ctx->dev->dev_mutex; ++ src_vq->dev = ctx->dev->dev; ++ src_vq->supports_requests = true; ++ src_vq->requires_requests = true; ++ ++ ret = vb2_queue_init(src_vq); ++ if (ret) ++ return ret; ++ ++ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ dst_vq->io_modes = VB2_MMAP | VB2_DMABUF; ++ dst_vq->drv_priv = ctx; ++ dst_vq->buf_struct_size = sizeof(struct rpivid_buffer); ++ dst_vq->min_buffers_needed = 1; ++ dst_vq->ops = &rpivid_qops; ++ dst_vq->mem_ops = &vb2_dma_contig_memops; ++ dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; ++ dst_vq->lock = &ctx->dev->dev_mutex; ++ dst_vq->dev = ctx->dev->dev; ++ ++ return vb2_queue_init(dst_vq); ++} +--- /dev/null ++++ b/drivers/staging/media/rpivid/rpivid_video.h +@@ -0,0 +1,30 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++/* ++ * Raspberry Pi HEVC driver ++ * ++ * Copyright (C) 2020 Raspberry Pi (Trading) Ltd ++ * ++ * Based on the Cedrus VPU driver, that is: ++ * ++ * Copyright (C) 2016 Florent Revest ++ * Copyright (C) 2018 Paul Kocialkowski ++ * Copyright (C) 2018 Bootlin ++ */ ++ ++#ifndef _RPIVID_VIDEO_H_ ++#define _RPIVID_VIDEO_H_ ++ ++struct rpivid_format { ++ u32 pixelformat; ++ u32 directions; ++ unsigned int capabilities; ++}; ++ ++extern const struct v4l2_ioctl_ops rpivid_ioctl_ops; ++ ++int rpivid_queue_init(void *priv, struct vb2_queue *src_vq, ++ struct vb2_queue *dst_vq); ++int rpivid_prepare_src_format(struct v4l2_pix_format *pix_fmt); ++int rpivid_prepare_dst_format(struct v4l2_pix_format *pix_fmt); ++ ++#endif diff --git a/target/linux/bcm27xx/patches-5.4/950-0514-dtoverlays-Add-overlay-to-enable-the-HEVC-V4L2-drive.patch b/target/linux/bcm27xx/patches-5.4/950-0514-dtoverlays-Add-overlay-to-enable-the-HEVC-V4L2-drive.patch new file mode 100644 index 0000000000..ee92ada02f --- /dev/null +++ b/target/linux/bcm27xx/patches-5.4/950-0514-dtoverlays-Add-overlay-to-enable-the-HEVC-V4L2-drive.patch @@ -0,0 +1,102 @@ +From b1d6499e00b6061ecc7061335199acf86f54d31a Mon Sep 17 00:00:00 2001 +From: Dave Stevenson +Date: Fri, 13 Mar 2020 16:52:55 +0000 +Subject: [PATCH] dtoverlays: Add overlay to enable the HEVC V4L2 + driver + +This replaces the rpivid_mem register mapping driver. +When the driver is complete, these DT changes should be +merged into the base DT instead of being an overlay. + +Signed-off-by: Dave Stevenson +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 7 +++ + .../boot/dts/overlays/rpivid-v4l2-overlay.dts | 55 +++++++++++++++++++ + 4 files changed, 63 insertions(+), 2 deletions(-) + create mode 100644 arch/arm/boot/dts/overlays/rpivid-v4l2-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -140,6 +140,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + rpi-proto.dtbo \ + rpi-sense.dtbo \ + rpi-tv.dtbo \ ++ rpivid-v4l2.dtbo \ + rra-digidac1-wm8741-audio.dtbo \ + sc16is750-i2c.dtbo \ + sc16is752-i2c.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -2064,6 +2064,13 @@ Load: dtoverlay=rpi-tv + Params: + + ++Name: rpivid-v4l2 ++Info: Load the V4L2 stateless video decoder driver for the HEVC block, ++ disabling the memory mapped devices in the process. ++Load: dtoverlay=rpivid-v4l2 ++Params: ++ ++ + Name: rra-digidac1-wm8741-audio + Info: Configures the Red Rocks Audio DigiDAC1 soundcard + Load: dtoverlay=rra-digidac1-wm8741-audio +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/rpivid-v4l2-overlay.dts +@@ -0,0 +1,55 @@ ++// SPDX-License-Identifier: GPL-2.0-only ++// Definitions for Raspberry Pi video decode engine ++/dts-v1/; ++/plugin/; ++ ++#include ++ ++/{ ++ compatible = "brcm,bcm2711"; ++ ++ fragment@0 { ++ target = <&scb>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <2>; ++ #size-cells = <1>; ++ codec@7eb10000 { ++ compatible = "raspberrypi,rpivid-vid-decoder"; ++ reg = <0x0 0x7eb10000 0x1000>, /* INTC */ ++ <0x0 0x7eb00000 0x10000>; /* HEVC */ ++ reg-names = "intc", ++ "hevc"; ++ ++ interrupts = ; ++ ++ clocks = <&hevc_clk>; ++ clock-names = "hevc"; ++ ++ hevc_clk: hevc_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <500000000>; ++ }; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&scb>; ++ __overlay__ { ++ hevc-decoder@7eb00000 { ++ status = "disabled"; ++ }; ++ rpivid-local-intc@7eb10000 { ++ status = "disabled"; ++ }; ++ h264-decoder@7eb20000 { ++ status = "disabled"; ++ }; ++ vp9-decoder@7eb30000 { ++ status = "disabled"; ++ }; ++ }; ++ }; ++}; -- 2.30.2