From 48c8b96f21817aad695246ef020b849d466cc502 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 14 Sep 2013 04:29:22 +0400 Subject: [PATCH] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup Currently on the Lager board NFS timeouts/delays are seen when booting. That turned out to happen because the SoC's ETH_LINK signal turns on and off after each packet. It is connected to Micrel KSZ8041 PHY's LED0 signal. Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds to non-default 01 setting of the PHY control register 1 bits 14-15. The 'sh_eth' driver resets the PHY when opening the network device, so we have to set the mentioned bits back to 01 from the default 00 value which causes bouncing of ETH_LINK. That can be achieved using the PHY platform fixup mechanism if we also modify the driver to use it.. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/board-lager.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index ffb6f0ac7606..5930af8d434f 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -155,6 +156,30 @@ static void __init lager_add_standard_devices(void) ðer_pdata, sizeof(ether_pdata)); } +/* + * Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds + * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits + * 14-15. We have to set them back to 01 from the default 00 value each time + * the PHY is reset. It's also important because the PHY's LED0 signal is + * connected to SoC's ETH_LINK signal and in the PHY's default mode it will + * bounce on and off after each packet, which we apparently want to avoid. + */ +static int lager_ksz8041_fixup(struct phy_device *phydev) +{ + u16 phyctrl1 = phy_read(phydev, 0x1e); + + phyctrl1 &= ~0xc000; + phyctrl1 |= 0x4000; + return phy_write(phydev, 0x1e, phyctrl1); +} + +static void __init lager_init(void) +{ + lager_add_standard_devices(); + + phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup); +} + static const char *lager_boards_compat_dt[] __initdata = { "renesas,lager", NULL, @@ -163,6 +188,6 @@ static const char *lager_boards_compat_dt[] __initdata = { DT_MACHINE_START(LAGER_DT, "lager") .init_early = r8a7790_init_delay, .init_time = r8a7790_timer_init, - .init_machine = lager_add_standard_devices, + .init_machine = lager_init, .dt_compat = lager_boards_compat_dt, MACHINE_END -- 2.30.2