From 47e3501a76894f4ba08bc61f33774bd5d39ff464 Mon Sep 17 00:00:00 2001 From: Siarhei Siamashka Date: Sun, 1 Feb 2015 00:27:06 +0200 Subject: [PATCH] sunxi: dram: Support more sun[457]i dram parameters in Kconfig This patch allows to configure all the important DRAM parameters in Kconfig. Signed-off-by: Siarhei Siamashka Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- board/sunxi/Kconfig | 43 +++++++++++++++++++++++++++++++++++ board/sunxi/dram_sun4i_auto.c | 6 +++-- board/sunxi/dram_sun5i_auto.c | 5 +++- 3 files changed, 51 insertions(+), 3 deletions(-) diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index da4e8ba518..4a2158988f 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -41,6 +41,15 @@ config DRAM_CLK Set the dram clock speed, valid range 240 - 480, must be a multiple of 24. +if MACH_SUN5I || MACH_SUN7I +config DRAM_MBUS_CLK + int "sunxi mbus clock speed" + default 300 + ---help--- + Set the mbus clock speed. The maximum on sun5i hardware is 300MHz. + +endif + config DRAM_ZQ int "sunxi dram zq value" default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I @@ -56,6 +65,40 @@ config DRAM_EMR1 ---help--- Set the dram controller emr1 value. +config DRAM_ODT_EN + int "sunxi dram odt_en value" + default 0 + ---help--- + Set the dram controller odt_en parameter. This can be used to + enable/disable the ODT feature. + +config DRAM_TPR3 + hex "sunxi dram tpr3 value" + default 0 + ---help--- + Set the dram controller tpr3 parameter. This parameter configures + the delay on the command lane and also phase shifts, which are + applied for sampling incoming read data. The default value 0 + means that no phase/delay adjustments are necessary. Properly + configuring this parameter increases reliability at high DRAM + clock speeds. + +config DRAM_DQS_GATING_DELAY + hex "sunxi dram dqs_gating_delay value" + default 0 + ---help--- + Set the dram controller dqs_gating_delay parmeter. Each byte + encodes the DQS gating delay for each byte lane. The delay + granularity is 1/4 cycle. For example, the value 0x05060606 + means that the delay is 5 quarter-cycles for one lane (1.25 + cycles) and 6 quarter-cycles (1.5 cycles) for 3 other lanes. + The default value 0 means autodetection. The results of hardware + autodetection are not very reliable and depend on the chip + temperature (sometimes producing different results on cold start + and warm reboot). But the accuracy of hardware autodetection + is usually good enough, unless running at really high DRAM + clocks speeds (up to 600MHz). If unsure, keep as 0. + choice prompt "sunxi dram timings" default DRAM_TIMINGS_VENDOR_MAGIC diff --git a/board/sunxi/dram_sun4i_auto.c b/board/sunxi/dram_sun4i_auto.c index ed54150ff4..09e0c9ae2e 100644 --- a/board/sunxi/dram_sun4i_auto.c +++ b/board/sunxi/dram_sun4i_auto.c @@ -9,7 +9,7 @@ static struct dram_para dram_para = { .io_width = 0, .bus_width = 0, .zq = CONFIG_DRAM_ZQ, - .odt_en = 0, + .odt_en = CONFIG_DRAM_ODT_EN, .size = 0, #ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC .cas = 6, @@ -19,12 +19,14 @@ static struct dram_para dram_para = { .emr2 = 0, #else # include "dram_timings_sun4i.h" + .active_windowing = 1, #endif - .tpr3 = 0, + .tpr3 = CONFIG_DRAM_TPR3, .tpr4 = 0, .tpr5 = 0, .emr1 = CONFIG_DRAM_EMR1, .emr3 = 0, + .dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY, }; unsigned long sunxi_dram_init(void) diff --git a/board/sunxi/dram_sun5i_auto.c b/board/sunxi/dram_sun5i_auto.c index bd9fd4bd27..e52d54c32e 100644 --- a/board/sunxi/dram_sun5i_auto.c +++ b/board/sunxi/dram_sun5i_auto.c @@ -5,13 +5,14 @@ static struct dram_para dram_para = { .clock = CONFIG_DRAM_CLK, + .mbus_clock = CONFIG_DRAM_MBUS_CLK, .type = 3, .rank_num = 1, .density = 0, .io_width = 0, .bus_width = 0, .zq = CONFIG_DRAM_ZQ, - .odt_en = 0, + .odt_en = CONFIG_DRAM_ODT_EN, .size = 0, #ifdef CONFIG_DRAM_TIMINGS_VENDOR_MAGIC .cas = 9, @@ -21,12 +22,14 @@ static struct dram_para dram_para = { .emr2 = 0x10, #else # include "dram_timings_sun4i.h" + .active_windowing = 1, #endif .tpr3 = 0, .tpr4 = 0, .tpr5 = 0, .emr1 = CONFIG_DRAM_EMR1, .emr3 = 0, + .dqs_gating_delay = CONFIG_DRAM_DQS_GATING_DELAY, }; unsigned long sunxi_dram_init(void) -- 2.30.2