From 47ab1cbf23aef658f46bd86af88edb4e3f665639 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Nov 2014 08:59:32 +0000 Subject: [PATCH] ar71xx: add support for TP-LINK CPE210/220/510/520 This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These devices are very similar to the Ubiquiti NanoStations, but with better specs: faster CPU, more RAM, 2x2 MIMO. Signed-off-by: Matthias Schiffer SVN-Revision: 43385 --- target/linux/ar71xx/base-files/etc/diag.sh | 3 + .../base-files/etc/uci-defaults/01_leds | 10 ++ .../base-files/etc/uci-defaults/02_network | 7 ++ target/linux/ar71xx/base-files/lib/ar71xx.sh | 40 ++++++- .../ar71xx/base-files/lib/upgrade/platform.sh | 32 ++++++ target/linux/ar71xx/config-3.14 | 1 + .../files/arch/mips/ath79/mach-cpe510.c | 107 ++++++++++++++++++ .../linux/ar71xx/generic/profiles/tp-link.mk | 11 ++ target/linux/ar71xx/image/Makefile | 29 +++++ .../610-MIPS-ath79-openwrt-machines.patch | 23 +++- 10 files changed, 256 insertions(+), 7 deletions(-) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 5c1d92f4aa5..e39a2b93128 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -43,6 +43,9 @@ get_status_led() { cap4200ag) status_led="senao:green:pwr" ;; + cpe510) + status_led="tp-link:green:link4" + ;; db120) status_led="db120:green:status" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index 42160713490..c6ecde5946c 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -62,6 +62,16 @@ carambola2) ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt" ;; +cpe510) + ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20" + ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" + ucidef_set_rssimon "wlan0" "40000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13" + ;; + db120) ucidef_set_led_usbdev "usb" "USB" "db120:green:usb" "1-1" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 872db67d9a6..3287e6ce121 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -63,6 +63,13 @@ tl-wdr4900-v2) ucidef_add_switch_vlan "switch0" "2" "1 6" ;; +cpe510) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0t 5" + ucidef_add_switch_vlan "switch0" "2" "0t 4" + ;; + db120 |\ rb-2011l | \ rb-2011uas |\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 8dde6ef7072..a8022588176 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -229,6 +229,39 @@ tplink_board_detect() { AR71XX_MODEL="$model $hwver" } +tplink_pharos_get_model_string() { + local part + part=$(find_mtd_part 'product-info') + [ -z "$part" ] && return 1 + + # The returned string will end with \r\n, but we don't remove it here + # to simplify matching against it in the sysupgrade image check + dd if=$part bs=1 skip=4360 2>/dev/null | head -n 1 +} + +tplink_pharos_board_detect() { + local model_string="$(tplink_pharos_get_model_string | tr -d '\r')" + local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS" + local model + + case "$1" in + 'CPE210(TP-LINK|UN|N300-2)') + model='TP-Link CPE210' + ;; + 'CPE220(TP-LINK|UN|N300-2)') + model='TP-Link CPE220' + ;; + 'CPE510(TP-LINK|UN|N300-5)') + model='TP-Link CPE510' + ;; + 'CPE520(TP-LINK|UN|N300-5)') + model='TP-Link CPE520' + ;; + esac + + [ -n "$model" ] && AR71XX_MODEL="$model v$2" +} + ar71xx_board_detect() { local machine local name @@ -302,6 +335,10 @@ ar71xx_board_detect() { *CAP4200AG) name="cap4200ag" ;; + *"CPE210/220/510/520") + name="cpe510" + tplink_pharos_board_detect + ;; *"DB120 reference board") name="db120" ;; @@ -775,7 +812,8 @@ ar71xx_board_detect() { ;; esac - [ "${machine:0:8}" = 'TP-LINK ' ] && tplink_board_detect "$machine" + [ -z "$AR71XX_MODEL" ] && [ "${machine:0:8}" = 'TP-LINK ' ] && \ + tplink_board_detect "$machine" [ -z "$name" ] && name="unknown" diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 598b33e79e8..6a85d01df3a 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -70,6 +70,33 @@ tplink_get_image_boot_size() { get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' } +tplink_pharos_check_image() { + local magic_long="$(get_magic_long "$1")" + [ "$magic_long" != "7f454c46" ] && { + echo "Invalid image magic '$magic_long'" + return 1 + } + + local model_string="$(tplink_pharos_get_model_string)" + local line + + # Here $1 is given to dd directly instead of get_image as otherwise the skip + # will take almost a second (as dd can't seek then) + # + # This will fail if the image isn't local, but that's fine: as the + # read loop won't be executed at all, it will return true, so the image + # is accepted (loading the first 1.5M of a remote image for this check seems + # a bit extreme) + dd if="$1" bs=1 skip=1511432 count=1024 2>/dev/null | while read line; do + [ "$line" == "$model_string" ] && break + done || { + echo "Unsupported image (model not in support-list)" + return 1 + } + + return 0 +} + seama_get_type_magic() { get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"' } @@ -217,6 +244,11 @@ platform_check_image() { return 0 ;; + cpe510) + tplink_pharos_check_image "$1" && return 0 + return 1 + ;; + dir-825-b1 | \ tew-673gru) dir825b_check_image "$1" && return 0 diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14 index 6d9be23aa1c..e5086afaa44 100644 --- a/target/linux/ar71xx/config-3.14 +++ b/target/linux/ar71xx/config-3.14 @@ -40,6 +40,7 @@ CONFIG_ATH79_MACH_AW_NR580=y CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y CONFIG_ATH79_MACH_CAP4200AG=y CONFIG_ATH79_MACH_CARAMBOLA2=y +CONFIG_ATH79_MACH_CPE510=y CONFIG_ATH79_MACH_DB120=y CONFIG_ATH79_MACH_DHP_1565_A1=y CONFIG_ATH79_MACH_DIR_505_A1=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c new file mode 100644 index 00000000000..8bf5c0f6226 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c @@ -0,0 +1,107 @@ +/* + * TP-LINK CPE210/220/510/520 board support + * + * Copyright (C) 2014 Matthias Schiffer + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + + +#define CPE510_GPIO_LED_LAN0 11 +#define CPE510_GPIO_LED_LAN1 12 +#define CPE510_GPIO_LED_L1 13 +#define CPE510_GPIO_LED_L2 14 +#define CPE510_GPIO_LED_L3 15 +#define CPE510_GPIO_LED_L4 16 + +#define CPE510_GPIO_BTN_RESET 4 + +#define CPE510_KEYS_POLL_INTERVAL 20 /* msecs */ +#define CPE510_KEYS_DEBOUNCE_INTERVAL (3 * CPE510_KEYS_POLL_INTERVAL) + + +static struct gpio_led cpe510_leds_gpio[] __initdata = { + { + .name = "tp-link:green:lan0", + .gpio = CPE510_GPIO_LED_LAN0, + .active_low = 1, + }, { + .name = "tp-link:green:lan1", + .gpio = CPE510_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "tp-link:green:link1", + .gpio = CPE510_GPIO_LED_L1, + .active_low = 1, + }, { + .name = "tp-link:green:link2", + .gpio = CPE510_GPIO_LED_L2, + .active_low = 1, + }, { + .name = "tp-link:green:link3", + .gpio = CPE510_GPIO_LED_L3, + .active_low = 1, + }, { + .name = "tp-link:green:link4", + .gpio = CPE510_GPIO_LED_L4, + .active_low = 1, + }, +}; + +static struct gpio_keys_button cpe510_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL, + .gpio = CPE510_GPIO_BTN_RESET, + .active_low = 1, + } +}; + + +static void __init cpe510_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + /* Disable JTAG, enabling GPIOs 0-3 */ + /* Configure OBS4 line, for GPIO 4*/ + ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, + AR934X_GPIO_FUNC_CLK_OBS4_EN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio), + cpe510_leds_gpio); + + ath79_register_gpio_keys_polled(1, CPE510_KEYS_POLL_INTERVAL, + ARRAY_SIZE(cpe510_gpio_keys), + cpe510_gpio_keys); + + ath79_register_m25p80(NULL); + + ath79_register_mdio(1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_register_eth(1); + + ath79_register_wmac(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE210/220/510/520", + cpe510_setup); diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk index 78333be0b5a..a9d170c7547 100644 --- a/target/linux/ar71xx/generic/profiles/tp-link.mk +++ b/target/linux/ar71xx/generic/profiles/tp-link.mk @@ -16,6 +16,17 @@ endef $(eval $(call Profile,ARCHERC7)) +define Profile/CPE510 + NAME:=TP-LINK CPE210/220/510/520 + PACKAGES:=rssileds +endef + +define Profile/CPE510/Description + Package set optimized for the TP-LINK CPE210/220/510/520. +endef +$(eval $(call Profile,CPE510)) + + define Profile/TLMR10U NAME:=TP-LINK TL-MR10U PACKAGES:=kmod-usb-core kmod-usb2 diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 255713a1621..1c78898d9d7 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -276,6 +276,7 @@ cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware) +cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware) eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) @@ -831,6 +832,32 @@ define Image/Build/TPLINK-LZMA/initramfs endef +Image/Build/TPLINK-SAFELOADER/buildkernel=$(call PatchKernelLzma,$(2),$(3) $(4)) + +define Image/Build/TPLINK-SAFELOADER + -rm -rf $(KDIR)/lzma-loader + $(LOADER_MAKE) LOADER=loader-$(2).elf\ + LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ + LOADER_DATA="$(KDIR_TMP)/vmlinux-$(2).bin.lzma" BOARD="$(2)" \ + compile loader.elf + + -$(STAGING_DIR_HOST)/bin/tplink-safeloader \ + -B $(5) \ + -k $(KDIR)/loader-$(2).elf \ + -r $(KDIR)/root.$(1) \ + -V $(REVISION) \ + -j \ + -o $(call factoryname,$(1),$(2)) + -$(STAGING_DIR_HOST)/bin/tplink-safeloader \ + -B $(5) \ + -k $(KDIR)/loader-$(2).elf \ + -r $(KDIR)/root.$(1) \ + -V $(REVISION) \ + -j -S \ + -o $(call sysupname,$(1),$(2)) +endef + + define Image/Build/CyberTAN echo -n '' > $(KDIR_TMP)/empty.bin $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \ @@ -1264,6 +1291,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4 $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma)) +$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510)) + $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma)) $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma)) diff --git a/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch index 60df54cf242..4ce926806b0 100644 --- a/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.14/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,144 @@ +@@ -16,22 +16,145 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -24,6 +24,7 @@ + ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */ + ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ + ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ ++ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ ATH79_MACH_DB120, /* Atheros DB120 reference board */ ATH79_MACH_PB44, /* Atheros PB44 reference board */ + ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ @@ -209,7 +210,7 @@ config ATH79_MACH_AP121 bool "Atheros AP121 reference board" select SOC_AR933X -@@ -11,62 +66,734 @@ config ATH79_MACH_AP121 +@@ -11,62 +66,743 @@ config ATH79_MACH_AP121 select ATH79_DEV_M25P80 select ATH79_DEV_USB select ATH79_DEV_WMAC @@ -698,6 +699,15 @@ + select ATH79_DEV_USB + select ATH79_DEV_WMAC + ++config ATH79_MACH_CPE510 ++ bool "TP-LINK CPE510 support" ++ select SOC_AR934X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ +config ATH79_MACH_TL_MR11U + bool "TP-LINK TL-MR11U/TL-MR3040 support" + select SOC_AR933X @@ -972,7 +982,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" -@@ -83,6 +810,65 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +819,65 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -1038,7 +1048,7 @@ endmenu config SOC_AR71XX -@@ -132,7 +918,10 @@ config ATH79_DEV_DSA +@@ -132,7 +927,10 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -1050,7 +1060,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -164,4 +953,7 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -164,4 +962,7 @@ config ATH79_PCI_ATH9K_FIXUP config ATH79_ROUTERBOOT def_bool n @@ -1060,7 +1070,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,90 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,91 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -1079,6 +1089,7 @@ +obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o +obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o +obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o ++obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o +obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o +obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o -- 2.30.2