From 465a60a463e071fe166943207b21303966c70efb Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 22 Jun 2008 19:09:42 +0000 Subject: [PATCH] use __raw_{readl,writel} routines in the uart driver as well SVN-Revision: 11561 --- .../patches/200-amba_pl010_hacks.patch | 179 +++++++++++++----- 1 file changed, 132 insertions(+), 47 deletions(-) diff --git a/target/linux/adm5120/patches/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch index 97b06acec8..39c1dea24c 100644 --- a/target/linux/adm5120/patches/200-amba_pl010_hacks.patch +++ b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch @@ -14,78 +14,114 @@ #define AMBA_ISR_PASS_LIMIT 256 -@@ -82,7 +81,7 @@ +@@ -82,9 +81,9 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; - cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); cr &= ~UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); } -@@ -92,7 +91,7 @@ + + static void pl010_start_tx(struct uart_port *port) +@@ -92,9 +91,9 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; - cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); cr |= UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); } -@@ -102,7 +101,7 @@ + + static void pl010_stop_rx(struct uart_port *port) +@@ -102,9 +101,9 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; - cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); - writel(cr, uap->port.membase + UART010_CR); +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); } -@@ -112,7 +111,7 @@ + + static void pl010_enable_ms(struct uart_port *port) +@@ -112,9 +111,9 @@ struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; - cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); ++ cr = __raw_readl(uap->port.membase + UART010_CR); cr |= UART010_CR_MSIE; - writel(cr, uap->port.membase + UART010_CR); +- writel(cr, uap->port.membase + UART010_CR); ++ __raw_writel(cr, uap->port.membase + UART010_CR); } + + static void pl010_rx_chars(struct uart_amba_port *uap) @@ -122,9 +121,9 @@ struct tty_struct *tty = uap->port.info->tty; unsigned int status, ch, flag, rsr, max_count = 256; - status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); while (UART_RX_DATA(status) && max_count--) { - ch = readb(uap->port.membase + UART01x_DR); -+ ch = readl(uap->port.membase + UART01x_DR); ++ ch = __raw_readl(uap->port.membase + UART01x_DR); flag = TTY_NORMAL; uap->port.icount.rx++; -@@ -133,7 +132,7 @@ +@@ -133,9 +132,9 @@ * Note that the error handling code is * out of the main execution path */ - rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; -+ rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; ++ rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; if (unlikely(rsr & UART01x_RSR_ANY)) { - writel(0, uap->port.membase + UART01x_ECR); +- writel(0, uap->port.membase + UART01x_ECR); ++ __raw_writel(0, uap->port.membase + UART01x_ECR); + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); @@ -165,7 +164,7 @@ uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); ignore_char: - status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); } spin_unlock(&uap->port.lock); tty_flip_buffer_push(tty); -@@ -210,7 +209,7 @@ +@@ -178,7 +177,7 @@ + int count; + + if (uap->port.x_char) { +- writel(uap->port.x_char, uap->port.membase + UART01x_DR); ++ __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; +@@ -190,7 +189,7 @@ + + count = uap->port.fifosize >> 1; + do { +- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); ++ __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) +@@ -208,9 +207,9 @@ + { + unsigned int status, delta; - writel(0, uap->port.membase + UART010_ICR); +- writel(0, uap->port.membase + UART010_ICR); ++ __raw_writel(0, uap->port.membase + UART010_ICR); - status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; -+ status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; delta = status ^ uap->old_status; uap->old_status = status; @@ -94,7 +130,7 @@ spin_lock(&uap->port.lock); - status = readb(uap->port.membase + UART010_IIR); -+ status = readl(uap->port.membase + UART010_IIR); ++ status = __raw_readl(uap->port.membase + UART010_IIR); if (status) { do { if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) @@ -103,7 +139,7 @@ break; - status = readb(uap->port.membase + UART010_IIR); -+ status = readl(uap->port.membase + UART010_IIR); ++ status = __raw_readl(uap->port.membase + UART010_IIR); } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | UART010_IIR_TIS)); handled = 1; @@ -112,7 +148,7 @@ { struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int status = readb(uap->port.membase + UART01x_FR); -+ unsigned int status = readl(uap->port.membase + UART01x_FR); ++ unsigned int status = __raw_readl(uap->port.membase + UART01x_FR); return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; } @@ -121,34 +157,50 @@ unsigned int status; - status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); if (status & UART01x_FR_DCD) result |= TIOCM_CAR; if (status & UART01x_FR_DSR) -@@ -301,7 +300,7 @@ +@@ -301,12 +300,12 @@ unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readb(uap->port.membase + UART010_LCRH); -+ lcr_h = readl(uap->port.membase + UART010_LCRH); ++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else -@@ -334,7 +333,7 @@ + lcr_h &= ~UART01x_LCRH_BRK; +- writel(lcr_h, uap->port.membase + UART010_LCRH); ++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); + } + +@@ -334,12 +333,12 @@ /* * initialise the old status of the modem signals */ - uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; -+ uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; /* * Finally, enable interrupts -@@ -365,7 +364,7 @@ - writel(0, uap->port.membase + UART010_CR); + */ +- writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, ++ __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE, + uap->port.membase + UART010_CR); + + return 0; +@@ -362,10 +361,10 @@ + /* + * disable all interrupts, disable the port + */ +- writel(0, uap->port.membase + UART010_CR); ++ __raw_writel(0, uap->port.membase + UART010_CR); /* disable break condition and fifos */ - writel(readb(uap->port.membase + UART010_LCRH) & -+ writel(readl(uap->port.membase + UART010_LCRH) & ++ __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) & ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), uap->port.membase + UART010_LCRH); @@ -161,15 +213,38 @@ quot = uart_get_divisor(port, baud); switch (termios->c_cflag & CSIZE) { -@@ -450,7 +449,7 @@ +@@ -450,25 +449,25 @@ uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; /* first, disable everything */ - old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; -+ old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; ++ old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; if (UART_ENABLE_MS(port, termios->c_cflag)) old_cr |= UART010_CR_MSIE; + +- writel(0, uap->port.membase + UART010_CR); ++ __raw_writel(0, uap->port.membase + UART010_CR); + + /* Set baud rate */ + quot -= 1; +- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); +- writel(quot & 0xff, uap->port.membase + UART010_LCRL); ++ __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM); ++ __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ +- writel(lcr_h, uap->port.membase + UART010_LCRH); +- writel(old_cr, uap->port.membase + UART010_CR); ++ __raw_writel(lcr_h, uap->port.membase + UART010_LCRH); ++ __raw_writel(old_cr, uap->port.membase + UART010_CR); + + spin_unlock_irqrestore(&uap->port.lock, flags); + } @@ -540,7 +539,7 @@ .verify_port = pl010_verify_port, }; @@ -179,42 +254,52 @@ #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE -@@ -550,7 +549,7 @@ +@@ -550,10 +549,10 @@ unsigned int status; do { - status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); barrier(); } while (!UART_TX_READY(status)); - writel(ch, uap->port.membase + UART01x_DR); -@@ -567,7 +566,7 @@ +- writel(ch, uap->port.membase + UART01x_DR); ++ __raw_writel(ch, uap->port.membase + UART01x_DR); + } + + static void +@@ -567,8 +566,8 @@ /* * First save the CR then disable the interrupts */ - old_cr = readb(uap->port.membase + UART010_CR); -+ old_cr = readl(uap->port.membase + UART010_CR); - writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); +- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); ++ old_cr = __raw_readl(uap->port.membase + UART010_CR); ++ __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); uart_console_write(&uap->port, s, count, pl010_console_putchar); -@@ -577,7 +576,7 @@ + +@@ -577,10 +576,10 @@ * and restore the TCR */ do { - status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); ++ status = __raw_readl(uap->port.membase + UART01x_FR); barrier(); } while (status & UART01x_FR_BUSY); - writel(old_cr, uap->port.membase + UART010_CR); +- writel(old_cr, uap->port.membase + UART010_CR); ++ __raw_writel(old_cr, uap->port.membase + UART010_CR); + + clk_disable(uap->clk); + } @@ -589,9 +588,9 @@ pl010_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { - if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { -+ if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { ++ if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { unsigned int lcr_h, quot; - lcr_h = readb(uap->port.membase + UART010_LCRH); -+ lcr_h = readl(uap->port.membase + UART010_LCRH); ++ lcr_h = __raw_readl(uap->port.membase + UART010_LCRH); *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { @@ -224,8 +309,8 @@ - quot = readb(uap->port.membase + UART010_LCRL) | - readb(uap->port.membase + UART010_LCRM) << 8; -+ quot = readl(uap->port.membase + UART010_LCRL) | -+ readl(uap->port.membase + UART010_LCRM) << 8; ++ quot = __raw_readl(uap->port.membase + UART010_LCRL) | ++ __raw_readl(uap->port.membase + UART010_LCRM) << 8; *baud = uap->port.uartclk / (16 * (quot + 1)); } } -- 2.30.2