From 461a8ecb2d76fb6f3ac1a90eb886697db869d387 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 2 Aug 2013 15:25:19 +0800 Subject: [PATCH] Revert "serial: sccnxp: Add DT support" This reverts commit 85c996907473e4ef824774b97b26499adf66521f. Alexander wishes to remove this patch as it is incorrect. Reported-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- .../bindings/tty/serial/sccnxp-serial.txt | 53 ------------------- drivers/tty/serial/sccnxp.c | 46 ++++------------ include/linux/platform_data/serial-sccnxp.h | 6 +-- 3 files changed, 12 insertions(+), 93 deletions(-) delete mode 100644 Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt diff --git a/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt b/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt deleted file mode 100644 index d18b1698133e..000000000000 --- a/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt +++ /dev/null @@ -1,53 +0,0 @@ -* NXP (Philips) SCC+++(SCN+++) serial driver - -Required properties: -- compatible: Should be "nxp,". The supported ICs include sc2681, - sc2691, sc2692, sc2891, sc2892, sc28202, sc68681 and sc68692. -- reg: Address and length of the register set for the device. -- interrupts: Should contain the interrupt number. If omitted, - polling mode will be used instead, so "poll-interval" property should - be populated in this case. - -Optional properties: -- clocks: Phandle to input clock. If omitted, default IC frequency will be - used instead. -- poll-interval: Poll interval time in nanoseconds. -- vcc-supply: The regulator supplying the VCC to drive the chip. -- nxp,sccnxp-io-cfg: Array contains values for the emulated modem signals. - The number of values depends on the UART-number in the selected chip. - Each value should be composed according to the following rules: - (LINE1 << SIGNAL1) | ... | (LINEX << SIGNALX), where: - LINE - VALUE: - OP0 - 1 - OP1 - 2 - OP2 - 3 - OP3 - 4 - OP4 - 5 - OP5 - 6 - OP6 - 7 - OP7 - 8 - IP0 - 9 - IP1 - 10 - IP2 - 11 - IP3 - 12 - IP4 - 13 - IP5 - 14 - IP6 - 15 - SIGNAL - VALUE: - DTR - 0 - RTS - 4 - DSR - 8 - CTS - 12 - DCD - 16 - RNG - 20 - DIR - 24 - -Example (Dual UART with direction control on OP0 & OP1): -sc2892@10100000 { - compatible = "nxp,sc2892"; - reg = <0x10100000 0x10>; - poll-interval = <10000>; - clocks = <&sc2892_clk>; - vcc-supply = <&sc2892_reg>; - nxp,sccnxp-io-cfg = <0x01000000 0x02000000>; -}; diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 67f73d1a8e7b..49e9bbfe6cab 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -20,8 +20,6 @@ #include #include #include -#include -#include #include #include #include @@ -855,25 +853,10 @@ static const struct platform_device_id sccnxp_id_table[] = { }; MODULE_DEVICE_TABLE(platform, sccnxp_id_table); -static const struct of_device_id sccnxp_dt_id_table[] = { - { .compatible = "nxp,sc2681", .data = &sc2681, }, - { .compatible = "nxp,sc2691", .data = &sc2691, }, - { .compatible = "nxp,sc2692", .data = &sc2692, }, - { .compatible = "nxp,sc2891", .data = &sc2891, }, - { .compatible = "nxp,sc2892", .data = &sc2892, }, - { .compatible = "nxp,sc28202", .data = &sc28202, }, - { .compatible = "nxp,sc68681", .data = &sc68681, }, - { .compatible = "nxp,sc68692", .data = &sc68692, }, - { } -}; -MODULE_DEVICE_TABLE(of, sccnxp_dt_id_table); - static int sccnxp_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev); - const struct of_device_id *of_id = - of_match_device(sccnxp_dt_id_table, &pdev->dev); int i, ret, uartclk; struct sccnxp_port *s; void __iomem *membase; @@ -892,22 +875,7 @@ static int sccnxp_probe(struct platform_device *pdev) spin_lock_init(&s->lock); - if (of_id) { - s->chip = (struct sccnxp_chip *)of_id->data; - - of_property_read_u32(pdev->dev.of_node, "poll-interval", - &s->pdata.poll_time_us); - of_property_read_u32(pdev->dev.of_node, "reg-shift", - &s->pdata.reg_shift); - of_property_read_u32_array(pdev->dev.of_node, - "nxp,sccnxp-io-cfg", - s->pdata.mctrl_cfg, s->chip->nr); - } else { - s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; - - if (pdata) - memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); - } + s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; s->regulator = devm_regulator_get(&pdev->dev, "vcc"); if (!IS_ERR(s->regulator)) { @@ -938,11 +906,16 @@ static int sccnxp_probe(struct platform_device *pdev) goto err_out; } + if (pdata) + memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); + if (s->pdata.poll_time_us) { dev_info(&pdev->dev, "Using poll mode, resolution %u usecs\n", s->pdata.poll_time_us); s->poll = 1; - } else { + } + + if (!s->poll) { s->irq = platform_get_irq(pdev, 0); if (s->irq < 0) { dev_err(&pdev->dev, "Missing irq resource data\n"); @@ -1043,9 +1016,8 @@ static int sccnxp_remove(struct platform_device *pdev) static struct platform_driver sccnxp_uart_driver = { .driver = { - .name = SCCNXP_NAME, - .owner = THIS_MODULE, - .of_match_table = sccnxp_dt_id_table, + .name = SCCNXP_NAME, + .owner = THIS_MODULE, }, .probe = sccnxp_probe, .remove = sccnxp_remove, diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index 98373d6add27..af0c8c3b89ae 100644 --- a/include/linux/platform_data/serial-sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -78,11 +78,11 @@ /* SCCNXP platform data structure */ struct sccnxp_pdata { /* Shift for A0 line */ - u32 reg_shift; + const u8 reg_shift; /* Modem control lines configuration */ - u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; /* Timer value for polling mode (usecs) */ - u32 poll_time_us; + const unsigned int poll_time_us; }; #endif -- 2.30.2