From 460a4de77d3b8f82fce98a9ed10e10464f767f97 Mon Sep 17 00:00:00 2001 From: David Dillow Date: Mon, 18 Jun 2012 00:20:06 -0300 Subject: [PATCH] [media] cx231xx: use TRANSFER_TYPE enum for cleanup Most calls to cx231xx_capture_start() already use the values from TRANSFER_TYPE, but cx231xx_capture_start() and cx231xx_initialize_stream_xfer() were hand coding the values. Use the named values (81 is never passed in), and simplify cx231xx_capture_start(), as the switch statements were identical and pcb_config->config_num is a u8, so any non-zero config got the same result. Signed-off-by: David Dillow Cc: Sri Deevi Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx231xx/cx231xx-avcore.c | 56 ++++++-------------- 1 file changed, 16 insertions(+), 40 deletions(-) diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c index b085a3c6dc04..447148eff958 100644 --- a/drivers/media/video/cx231xx/cx231xx-avcore.c +++ b/drivers/media/video/cx231xx/cx231xx-avcore.c @@ -89,7 +89,7 @@ void initGPIO(struct cx231xx *dev) verve_read_byte(dev, 0x07, &val); cx231xx_info(" verve_read_byte address0x07=0x%x\n", val); - cx231xx_capture_start(dev, 1, 2); + cx231xx_capture_start(dev, 1, Vbi); cx231xx_mode_register(dev, EP_MODE_SET, 0x0500FE00); cx231xx_mode_register(dev, GBULK_BIT_EN, 0xFFFDFFFF); @@ -99,7 +99,7 @@ void uninitGPIO(struct cx231xx *dev) { u8 value[4] = { 0, 0, 0, 0 }; - cx231xx_capture_start(dev, 0, 2); + cx231xx_capture_start(dev, 0, Vbi); verve_write_byte(dev, 0x07, 0x14); cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 0x68, value, 4); @@ -2516,29 +2516,29 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) if (dev->udev->speed == USB_SPEED_HIGH) { switch (media_type) { - case 81: /* audio */ + case Audio: cx231xx_info("%s: Audio enter HANC\n", __func__); status = cx231xx_mode_register(dev, TS_MODE_REG, 0x9300); break; - case 2: /* vbi */ + case Vbi: cx231xx_info("%s: set vanc registers\n", __func__); status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300); break; - case 3: /* sliced cc */ + case Sliced_cc: cx231xx_info("%s: set hanc registers\n", __func__); status = cx231xx_mode_register(dev, TS_MODE_REG, 0x1300); break; - case 0: /* video */ + case Raw_Video: cx231xx_info("%s: set video registers\n", __func__); status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100); break; - case 4: /* ts1 */ + case TS1_serial_mode: cx231xx_info("%s: set ts1 registers", __func__); if (dev->board.has_417) { @@ -2569,7 +2569,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) } break; - case 6: /* ts1 parallel mode */ + case TS1_parallel_mode: cx231xx_info("%s: set ts1 parallel mode registers\n", __func__); status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100); @@ -2592,52 +2592,28 @@ int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type) /* get EP for media type */ pcb_config = (struct pcb_config *)&dev->current_pcb_config; - if (pcb_config->config_num == 1) { + if (pcb_config->config_num) { switch (media_type) { - case 0: /* Video */ + case Raw_Video: ep_mask = ENABLE_EP4; /* ep4 [00:1000] */ break; - case 1: /* Audio */ + case Audio: ep_mask = ENABLE_EP3; /* ep3 [00:0100] */ break; - case 2: /* Vbi */ + case Vbi: ep_mask = ENABLE_EP5; /* ep5 [01:0000] */ break; - case 3: /* Sliced_cc */ + case Sliced_cc: ep_mask = ENABLE_EP6; /* ep6 [10:0000] */ break; - case 4: /* ts1 */ - case 6: /* ts1 parallel mode */ + case TS1_serial_mode: + case TS1_parallel_mode: ep_mask = ENABLE_EP1; /* ep1 [00:0001] */ break; - case 5: /* ts2 */ + case TS2: ep_mask = ENABLE_EP2; /* ep2 [00:0010] */ break; } - - } else if (pcb_config->config_num > 1) { - switch (media_type) { - case 0: /* Video */ - ep_mask = ENABLE_EP4; /* ep4 [00:1000] */ - break; - case 1: /* Audio */ - ep_mask = ENABLE_EP3; /* ep3 [00:0100] */ - break; - case 2: /* Vbi */ - ep_mask = ENABLE_EP5; /* ep5 [01:0000] */ - break; - case 3: /* Sliced_cc */ - ep_mask = ENABLE_EP6; /* ep6 [10:0000] */ - break; - case 4: /* ts1 */ - case 6: /* ts1 parallel mode */ - ep_mask = ENABLE_EP1; /* ep1 [00:0001] */ - break; - case 5: /* ts2 */ - ep_mask = ENABLE_EP2; /* ep2 [00:0010] */ - break; - } - } if (start) { -- 2.30.2