From 456d05d6d8ca7dd3d558afe43f380f273c73fca4 Mon Sep 17 00:00:00 2001 From: Kasparas Elzbutas Date: Mon, 18 Jul 2022 10:05:33 +0300 Subject: [PATCH] ipq40xx: fix RUTX10 Wi-Fi woes This partially reverts: commit cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") U-Boot on these devices mangles the device tree, so nvmem-cell type calibration doesn't work. Fixes: cfc13c44595d ("ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data") Signed-off-by: Kasparas Elzbutas (added reference to commit, rewrote commit message) Signed-off-by: Christian Lamparter --- .../etc/hotplug.d/firmware/11-ath10k-caldata | 8 +++++ .../arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi | 30 ------------------- 2 files changed, 8 insertions(+), 30 deletions(-) diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index e0b4eed6f2..8fb9d81d3b 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -127,6 +127,10 @@ case "$FIRMWARE" in caldata_extract_mmc "0:ART" 0x1000 0x2f20 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0) ;; + teltonika,rutx10) + caldata_extract "0:ART" 0x1000 0x2f20 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2) + ;; zyxel,nbg6617 |\ zyxel,wre6606) caldata_extract "ART" 0x1000 0x2f20 @@ -208,6 +212,10 @@ case "$FIRMWARE" in caldata_extract_mmc "0:ART" 0x5000 0x2f20 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc) ;; + teltonika,rutx10) + caldata_extract "0:ART" 0x5000 0x2f20 + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3) + ;; zyxel,nbg6617 |\ zyxel,wre6606) caldata_extract "ART" 0x5000 0x2f20 diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi index ebb2d08e73..3673a13430 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi @@ -188,30 +188,12 @@ label = "0:ART"; reg = <0x2e0000 0x10000>; read-only; - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; }; config: partition@2f0000 { label = "0:CONFIG"; reg = <0x2f0000 0x10000>; read-only; - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_config_0: macaddr@0 { - reg = <0x0 0x6>; - }; }; partition@300000 { @@ -267,15 +249,3 @@ pinctrl-names = "default"; phy-reset-gpio = <&tlmm 62 0>; }; - -&wifi0 { - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_1000>, <&macaddr_config_0>; - mac-address-increment = <2>; -}; - -&wifi1 { - nvmem-cell-names = "pre-calibration", "mac-address"; - nvmem-cells = <&precal_art_5000>, <&macaddr_config_0>; - mac-address-increment = <3>; -}; -- 2.30.2