From 4564faeafbf11feb839e2e3f927be2f1a919ba96 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 16 Apr 2015 17:17:00 +0530 Subject: [PATCH] ti: dwc3: Enable clocks in enable_basic_clocks() in hw_data.c Commit d3cfcb3 (ARM: DRA7: Enable clocks for USB OTGSS and USB PHY) changed the member names of prcm_regs from cm_l3init_usb_otg_ss_clkctrl to cm_l3init_usb_otg_ss1_clkctrl and from cm_coreaon_usb_phy_core_clkctrl to cm_coreaon_usb_phy1_core_clkctrl in order to differentiate between the two dwc3 controllers present in dra7xx/am43xx and enabled these clocks in enable_basic_clocks() in hw_data.c. However these clocks continued to be enabled in board files/driver files for dwc3 host mode functionality causing compilation break with few configs. Fixed it here by making all the clocks enabled in enable_basic_clocks() and removing it from board files/driver files here. Signed-off-by: Kishon Vijay Abraham I --- arch/arm/cpu/armv7/omap5/hw_data.c | 4 ++-- board/ti/beagle_x15/board.c | 10 ---------- drivers/usb/phy/omap_usb_phy.c | 16 ---------------- 3 files changed, 2 insertions(+), 28 deletions(-) diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index e4abb25fc2..868415d038 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -460,7 +460,7 @@ void enable_basic_clocks(void) (*prcm)->cm_l4per_gpio6_clkctrl, (*prcm)->cm_l4per_gpio7_clkctrl, (*prcm)->cm_l4per_gpio8_clkctrl, -#ifdef CONFIG_USB_DWC3 +#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) (*prcm)->cm_l3init_ocp2scp1_clkctrl, (*prcm)->cm_l3init_usb_otg_ss1_clkctrl, #endif @@ -495,7 +495,7 @@ void enable_basic_clocks(void) setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, HSMMC_CLKCTRL_CLKSEL_MASK); -#ifdef CONFIG_USB_DWC3 +#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) /* Enable 960 MHz clock for dwc3 */ setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, OPTFCLKEN_REFCLK960M); diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c index 3a7e04d542..ac0d22c9ed 100644 --- a/board/ti/beagle_x15/board.c +++ b/board/ti/beagle_x15/board.c @@ -385,13 +385,3 @@ int board_eth_init(bd_t *bis) return ret; } #endif - -#ifdef CONFIG_USB_XHCI_OMAP -int board_usb_init(int index, enum usb_init_type init) -{ - setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, - OTG_SS_CLKCTRL_MODULEMODE_HW | OPTFCLKEN_REFCLK960M); - - return 0; -} -#endif diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c index 52a3664b99..63d9301681 100644 --- a/drivers/usb/phy/omap_usb_phy.c +++ b/drivers/usb/phy/omap_usb_phy.c @@ -131,17 +131,6 @@ static void omap_enable_usb3_phy(struct omap_xhci *omap) { u32 val; - /* Setting OCP2SCP1 register */ - setbits_le32((*prcm)->cm_l3init_ocp2scp1_clkctrl, - OCP2SCP1_CLKCTRL_MODULEMODE_HW); - - /* Turn on 32K AON clk */ - setbits_le32((*prcm)->cm_coreaon_usb_phy_core_clkctrl, - USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); - - /* Setting CM_L3INIT_CLKSTCTRL to 0x0 i.e NO sleep */ - writel(0x0, (*prcm)->cm_l3init_clkstctrl); - val = (USBOTGSS_DMADISABLE | USBOTGSS_STANDBYMODE_SMRT_WKUP | USBOTGSS_IDLEMODE_NOIDLE); @@ -169,11 +158,6 @@ static void omap_enable_usb3_phy(struct omap_xhci *omap) writel(val, &omap->otg_wrapper->irqstatus_1); val = readl(&omap->otg_wrapper->irqstatus_0); writel(val, &omap->otg_wrapper->irqstatus_0); - - /* Enable the USB OTG Super speed clocks */ - val = (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW); - setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, val); - }; #endif /* CONFIG_OMAP_USB3PHY1_HOST */ -- 2.30.2