From 450895d04ba13a96886eddfeddb11556ae8624f1 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sun, 24 Mar 2019 00:18:46 +0200 Subject: [PATCH] net: phy: bcm54xx: Encode link speed and activity into LEDs Previously the green and amber LEDs on this quad PHY were solid, to indicate an encoding of the link speed (10/100/1000). This keeps the LEDs always on just as before, but now they flash on Rx/Tx activity. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 13 +++++++++++++ include/linux/brcmphy.h | 16 ++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 9605d4fe540b..cb86a3e90c7d 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -323,6 +323,19 @@ static int bcm54xx_config_init(struct phy_device *phydev) bcm54xx_phydsp_config(phydev); + /* Encode link speed into LED1 and LED3 pair (green/amber). + * Also flash these two LEDs on activity. This means configuring + * them for MULTICOLOR and encoding link/activity into them. + */ + val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) | + BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1); + bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val); + + val = BCM_LED_MULTICOLOR_IN_PHASE | + BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) | + BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT); + bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val); + return 0; } diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 9cd00a37b8d3..6db2d9a6e503 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -148,6 +148,22 @@ #define BCM_LED_SRC_OFF 0xe /* Tied high */ #define BCM_LED_SRC_ON 0xf /* Tied low */ +/* + * Broadcom Multicolor LED configurations (expansion register 4) + */ +#define BCM_EXP_MULTICOLOR (MII_BCM54XX_EXP_SEL_ER + 0x04) +#define BCM_LED_MULTICOLOR_IN_PHASE BIT(8) +#define BCM_LED_MULTICOLOR_LINK_ACT 0x0 +#define BCM_LED_MULTICOLOR_SPEED 0x1 +#define BCM_LED_MULTICOLOR_ACT_FLASH 0x2 +#define BCM_LED_MULTICOLOR_FDX 0x3 +#define BCM_LED_MULTICOLOR_OFF 0x4 +#define BCM_LED_MULTICOLOR_ON 0x5 +#define BCM_LED_MULTICOLOR_ALT 0x6 +#define BCM_LED_MULTICOLOR_FLASH 0x7 +#define BCM_LED_MULTICOLOR_LINK 0x8 +#define BCM_LED_MULTICOLOR_ACT 0x9 +#define BCM_LED_MULTICOLOR_PROGRAM 0xa /* * BCM5482: Shadow registers -- 2.30.2