From 448de2e2e5c2c00a11bdf08147ee85242b2d48d2 Mon Sep 17 00:00:00 2001 From: =?utf8?q?=E5=BC=A0=E9=B9=8F?= Date: Sat, 31 Oct 2020 09:35:21 +0800 Subject: [PATCH] ath79: add support for Qxwlan E600G v2 / E600GAC v2 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit E600G v2 based on Qualcomm/Atheros QCA9531 Specification: - 650/600/200 MHz (CPU/DDR/AHB) - 128/64 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz - 2 x 10/100 Mbps Ethernet(RJ45) - 1 x MiniPCI-e - 1 x SIM (3G/4G) - 5 x LED , 1 x Button(SW2-Reset Buttun), 1 x power input - UART(J100) header on PCB(115200 8N1) E600GAC v2 based on Qualcomm/Atheros QCA9531 + QCA9887 Specification: - 650/600/200 MHz (CPU/DDR/AHB) - 128/64 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz - 1T1R 5 GHz - 2 x 10/100 Mbps Ethernet(RJ45) - 6 x LED (one three-color led), 2 x Button(SW2-Reset Buttun),1 x power input - UART (J100)header on PCB(115200 8N1) Flash instruction: 1.Using tftp mode with UART connection and original OpenWrt image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ath79-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to OpenWrt: run lfw - After that the device will reboot and boot to OpenWrt. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original OpenWrt image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ath79-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to OpenWrt. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 [rearrange in generic.mk, fix one case in 04_led_migration, update commit message] Signed-off-by: Adrian Schmutzler --- .../ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts | 32 +++++ .../ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts | 32 +++++ .../linux/ath79/dts/qca9531_qxwlan_e600g.dtsi | 114 ++++++++++++++++++ .../dts/qca9531_qxwlan_e600gac-v2-16m.dts | 48 ++++++++ .../dts/qca9531_qxwlan_e600gac-v2-8m.dts | 48 ++++++++ .../generic/base-files/etc/board.d/01_leds | 4 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 2 + .../etc/uci-defaults/04_led_migration | 8 ++ target/linux/ath79/image/generic.mk | 44 +++++++ 9 files changed, 332 insertions(+) create mode 100644 target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts create mode 100644 target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts create mode 100644 target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi create mode 100644 target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts create mode 100644 target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts new file mode 100644 index 000000000000..9b4c0a514d60 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-16m.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9531_qxwlan_e600g.dtsi" + +/ { + model = "Qxwlan E600G v2 16M"; + compatible = "qxwlan,e600g-v2-16m", "qca,qca9531"; +}; + +&leds { + wlan { + label = "blue:wlan"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; +}; + +&partitions { + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0xf90000>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts new file mode 100644 index 000000000000..7822ec664a4c --- /dev/null +++ b/target/linux/ath79/dts/qca9531_qxwlan_e600g-v2-8m.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9531_qxwlan_e600g.dtsi" + +/ { + model = "Qxwlan E600G v2 8M"; + compatible = "qxwlan,e600g-v2-8m", "qca,qca9531"; +}; + +&leds { + wlan { + label = "blue:wlan"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; +}; + +&partitions { + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0x790000>; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi b/target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi new file mode 100644 index 000000000000..6ba4ae8fdf21 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_qxwlan_e600g.dtsi @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca953x.dtsi" + +#include +#include + +/ { + aliases { + label-mac-device = ð0; + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + keys: keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + + led_system: system { + label = "blue:system"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wan { + label = "green:wan"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "green:lan"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + + pridata: partition@50000 { + label = "pri-data"; + reg = <0x050000 0x010000>; + read-only; + }; + + art: partition@60000 { + label = "art"; + reg = <0x060000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + mtd-mac-address = <&pridata 0x400>; + mtd-mac-address-increment = <1>; +}; + +ð1 { + mtd-mac-address = <&pridata 0x400>; +}; + +&uart { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts new file mode 100644 index 000000000000..4be24986df87 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-16m.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9531_qxwlan_e600g.dtsi" + +/ { + model = "Qxwlan E600GAC v2 16M"; + compatible = "qxwlan,e600gac-v2-16m", "qca,qca9531"; +}; + +&keys { + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; +}; + +&leds { + wlan2g { + label = "orange:wlan2g"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + control1 { + label = "green:control"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + control2 { + label = "red:control"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + control3 { + label = "blue:control"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; +}; + +&partitions { + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0xf90000>; + }; +}; diff --git a/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts new file mode 100644 index 000000000000..826c46b2a182 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_qxwlan_e600gac-v2-8m.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9531_qxwlan_e600g.dtsi" + +/ { + model = "Qxwlan E600GAC v2 8M"; + compatible = "qxwlan,e600gac-v2-8m", "qca,qca9531"; +}; + +&keys { + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; +}; + +&leds { + wlan2g { + label = "orange:wlan2g"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + control1 { + label = "green:control"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + control2 { + label = "red:control"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + control3 { + label = "blue:control"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; +}; + +&partitions { + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0x790000>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 0c130e329e22..227e64678d63 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -195,6 +195,10 @@ etactica,eg200) ucidef_set_led_oneshot "modbus" "Modbus" "red:modbus" "100" "33" ;; glinet,gl-mifi|\ +qxwlan,e600g-v2-8m|\ +qxwlan,e600g-v2-16m|\ +qxwlan,e600gac-v2-8m|\ +qxwlan,e600gac-v2-16m|\ qxwlan,e750a-v4-8m|\ qxwlan,e750a-v4-16m) ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x02" diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 25e864ba72bb..e968658cac12 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -24,6 +24,8 @@ case "$FIRMWARE" in devolo,magic-2-wifi|\ qxwlan,e1700ac-v2-8m|\ qxwlan,e1700ac-v2-16m|\ + qxwlan,e600gac-v2-8m|\ + qxwlan,e600gac-v2-16m|\ ubnt,unifiac-lite|\ ubnt,unifiac-lr|\ ubnt,unifiac-mesh|\ diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration index 0efc2bf9d7c8..231afd9f5701 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration @@ -24,6 +24,14 @@ qxwlan,e558-v2-16m|\ qxwlan,e558-v2-8m) migrate_leds ":qss=:sig2" ;; +qxwlan,e600g-v2-16m|\ +qxwlan,e600g-v2-8m) + migrate_leds "blue:wan=blue:wlan" + ;; +qxwlan,e600gac-v2-16m|\ +qxwlan,e600gac-v2-8m) + migrate_leds "orange:wan=orange:wlan2g" "green:system=blue:system" + ;; qxwlan,e750a-v4-16m|\ qxwlan,e750a-v4-8m|\ qxwlan,e750g-v8-16m|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 1c2c805b2a6b..dc91e1b6d976 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1513,6 +1513,50 @@ define Device/qxwlan_e558-v2-8m endef TARGET_DEVICES += qxwlan_e558-v2-8m +define Device/qxwlan_e600g-v2 + SOC := qca9531 + DEVICE_VENDOR := Qxwlan + DEVICE_MODEL := E600G + DEVICE_PACKAGES := kmod-usb2 + SUPPORTED_DEVICES += e600g-v2 +endef + +define Device/qxwlan_e600g-v2-16m + $(Device/qxwlan_e600g-v2) + DEVICE_VARIANT := v2 (16M) + IMAGE_SIZE := 15936k +endef +TARGET_DEVICES += qxwlan_e600g-v2-16m + +define Device/qxwlan_e600g-v2-8m + $(Device/qxwlan_e600g-v2) + DEVICE_VARIANT := v2 (8M) + IMAGE_SIZE := 7744k +endef +TARGET_DEVICES += qxwlan_e600g-v2-8m + +define Device/qxwlan_e600gac-v2 + SOC := qca9531 + DEVICE_VENDOR := Qxwlan + DEVICE_MODEL := E600GAC + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct + SUPPORTED_DEVICES += e600gac-v2 +endef + +define Device/qxwlan_e600gac-v2-16m + $(Device/qxwlan_e600gac-v2) + DEVICE_VARIANT := v2 (16M) + IMAGE_SIZE := 15936k +endef +TARGET_DEVICES += qxwlan_e600gac-v2-16m + +define Device/qxwlan_e600gac-v2-8m + $(Device/qxwlan_e600gac-v2) + DEVICE_VARIANT := v2 (8M) + IMAGE_SIZE := 7744k +endef +TARGET_DEVICES += qxwlan_e600gac-v2-8m + define Device/qxwlan_e750a-v4 SOC := ar9344 DEVICE_VENDOR := Qxwlan -- 2.30.2