From 44419aed87f1c2ea1024535edabc1c3a250b6fc8 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 15 Oct 2006 23:34:22 +0000 Subject: [PATCH] Merge preliminary rdc-2.6 support (Airlink101 AR525W) SVN-Revision: 5138 --- include/target.mk | 1 + target/Config.in | 10 + target/image/rdc/Makefile | 25 + target/linux/rdc-2.6/Makefile | 21 + target/linux/rdc-2.6/config | 1506 +++++++++++++++++ .../linux/rdc-2.6/patches/000-rdc_fixes.patch | 861 ++++++++++ .../patches/001-rdc3210_flash_map.patch | 271 +++ .../rdc-2.6/patches/002-r6040_ethernet.patch | 1018 +++++++++++ 8 files changed, 3713 insertions(+) create mode 100644 target/image/rdc/Makefile create mode 100644 target/linux/rdc-2.6/Makefile create mode 100644 target/linux/rdc-2.6/config create mode 100644 target/linux/rdc-2.6/patches/000-rdc_fixes.patch create mode 100644 target/linux/rdc-2.6/patches/001-rdc3210_flash_map.patch create mode 100644 target/linux/rdc-2.6/patches/002-r6040_ethernet.patch diff --git a/include/target.mk b/include/target.mk index 6c21f517bf7..55b6364289a 100644 --- a/include/target.mk +++ b/include/target.mk @@ -16,6 +16,7 @@ $(eval $(call kernel_template,2.4,ar7,2_4_AR7)) $(eval $(call kernel_template,2.6,brcm,2_6_BRCM)) $(eval $(call kernel_template,2.6,brcm63xx,2_6_BRCM63XX)) $(eval $(call kernel_template,2.6,rb532,2_6_RB532)) +$(eval $(call kernel_template,2.6,rdc,2_6_RDC)) $(eval $(call kernel_template,2.6,x86,2_6_X86)) $(eval $(call kernel_template,2.6,uml,2_6_UML)) $(eval $(call kernel_template,2.4,ar531x,2_4_AR531X)) diff --git a/target/Config.in b/target/Config.in index effd9d7aa8c..9bcbd3782e5 100644 --- a/target/Config.in +++ b/target/Config.in @@ -98,6 +98,16 @@ config LINUX_2_6_RB532 select PCI_SUPPORT select USES_JFFS2 +config LINUX_2_6_RDC + bool "RDC x86 [2.6]" + depends BROKEN + select i386 + select LINUX_2_6 + select PCI_SUPPORT + select USES_JFFS2 + help + Build firmware images for RDC R3203 based routers (e.g. Airlink101 AR525W) + config LINUX_2_4_AR7 bool "TI AR7 [2.4]" select mipsel diff --git a/target/image/rdc/Makefile b/target/image/rdc/Makefile new file mode 100644 index 00000000000..06082404ee7 --- /dev/null +++ b/target/image/rdc/Makefile @@ -0,0 +1,25 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Build/Clean +endef + +define Image/Prepare +endef + +define Image/Prepare + cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma +endef + +define Image/Build/ar525w +endef + +$(call Image/Build/ar525w,$(1),$(patsubst jffs2-%,jffs2,$(1))) + +$(eval $(call BuildImage)) diff --git a/target/linux/rdc-2.6/Makefile b/target/linux/rdc-2.6/Makefile new file mode 100644 index 00000000000..59f02b33404 --- /dev/null +++ b/target/linux/rdc-2.6/Makefile @@ -0,0 +1,21 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +LINUX_VERSION:=2.6.17 +LINUX_RELEASE:=1 +LINUX_KERNEL_MD5SUM:=37ddefe96625502161f075b9d907f21e + +include ./config +include $(INCLUDE_DIR)/kernel.mk +include $(INCLUDE_DIR)/kernel-build.mk + +$(LINUX_DIR)/.patched: $(LINUX_DIR)/.unpacked + [ -d ../generic-$(KERNEL)/patches ] && $(PATCH) $(LINUX_DIR) ../generic-$(KERNEL)/patches + [ -d ./patches ] && $(PATCH) $(LINUX_DIR) ./patches + @$(CP) config $(LINUX_DIR)/.config + touch $@ diff --git a/target/linux/rdc-2.6/config b/target/linux/rdc-2.6/config new file mode 100644 index 00000000000..bc3ff9a7560 --- /dev/null +++ b/target/linux/rdc-2.6/config @@ -0,0 +1,1506 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17 +# Sat Oct 7 19:38:32 2006 +# +CONFIG_X86_32=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_X86=y +CONFIG_MMU=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_DMI=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +# CONFIG_VM86 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# Processor type and features +# +# CONFIG_SMP is not set +CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +CONFIG_M386=y +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +CONFIG_X86_GENERIC=y +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_X86_PPRO_FENCE=y +CONFIG_X86_F00F_BUG=y +CONFIG_X86_INTEL_USERCOPY=y +# CONFIG_HPET_TIMER is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_X86_UP_APIC is not set +# CONFIG_X86_MCE is not set +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +CONFIG_X86_REBOOTFIXUPS=y +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_3G_OPT is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MATH_EMULATION=y +# CONFIG_MTRR is not set +# CONFIG_REGPARM is not set +# CONFIG_SECCOMP is not set +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +# CONFIG_KEXEC is not set +CONFIG_PHYSICAL_START=0x100000 + +# +# Power management options (ACPI, APM) +# +# CONFIG_PM is not set + +# +# ACPI (Advanced Configuration and Power Interface) Support +# +# CONFIG_ACPI is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# +# CPUFreq processor drivers +# +# CONFIG_X86_POWERNOW_K6 is not set +# CONFIG_X86_POWERNOW_K7 is not set +# CONFIG_X86_POWERNOW_K8 is not set +CONFIG_X86_GX_SUSPMOD=m +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +# CONFIG_X86_SPEEDSTEP_ICH is not set +# CONFIG_X86_SPEEDSTEP_SMI is not set +# CONFIG_X86_P4_CLOCKMOD is not set +# CONFIG_X86_CPUFREQ_NFORCE2 is not set +# CONFIG_X86_LONGRUN is not set + +# +# shared options +# +# CONFIG_X86_SPEEDSTEP_LIB is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +# CONFIG_PCI_GODIRECT is not set +CONFIG_PCI_GOANY=y +CONFIG_PCI_BIOS=y +CONFIG_PCI_DIRECT=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ISA_DMA_API=y +# CONFIG_ISA is not set +# CONFIG_MCA is not set +# CONFIG_SCx200 is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_FWMARK=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +CONFIG_IPSEC_NAT_TRAVERSAL=y +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=m +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=y +CONFIG_TCP_CONG_SCALABLE=m + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_IPV6_ROUTER_PREF=y +# CONFIG_IPV6_ROUTE_INFO is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_BRIDGE_NETFILTER is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=y + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_PPTP=m +CONFIG_IP_NF_H323=m +CONFIG_IP_NF_SIP=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_IPP2P=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_TIME=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_LAYER7=m +# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_IMQ=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_ROUTE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_NAT_PPTP=m +CONFIG_IP_NF_NAT_H323=m +CONFIG_IP_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=y +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_TTL=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_IP_NF_SET=m +CONFIG_IP_NF_SET_MAX=256 +CONFIG_IP_NF_SET_HASHSIZE=1024 +CONFIG_IP_NF_SET_IPMAP=m +CONFIG_IP_NF_SET_MACIPMAP=m +CONFIG_IP_NF_SET_PORTMAP=m +CONFIG_IP_NF_SET_IPHASH=m +CONFIG_IP_NF_SET_NETHASH=m +CONFIG_IP_NF_SET_IPTREE=m +CONFIG_IP_NF_MATCH_SET=m +CONFIG_IP_NF_TARGET_SET=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_IMQ=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_ROUTE=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m + +# +# Bridge: Netfilter Configuration +# +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +CONFIG_ATM_CLIP_NO_ICMP=y +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +CONFIG_ATM_BR2684_IPFILTER=y +CONFIG_BRIDGE=y +CONFIG_VLAN_8021Q=y +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_ESFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +# CONFIG_NET_SCH_NETEM is not set +CONFIG_NET_SCH_INGRESS=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CLS_U32_MARK is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_POLICE=y +# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ESTIMATOR=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +CONFIG_AX25=m +# CONFIG_AX25_DAMA_SLAVE is not set +# CONFIG_NETROM is not set +# CONFIG_ROSE is not set + +# +# AX.25 network device drivers +# +CONFIG_MKISS=m +# CONFIG_6PACK is not set +# CONFIG_BPQETHER is not set +# CONFIG_BAYCOM_SER_FDX is not set +# CONFIG_BAYCOM_SER_HDX is not set +# CONFIG_YAM is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIVHCI is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_IEEE80211_SOFTMAC=m +CONFIG_IEEE80211_SOFTMAC_DEBUG=y +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y + +# +# Connector - unified userspace <-> kernelspace linker +# +CONFIG_CONNECTOR=m + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PNC2000 is not set +CONFIG_MTD_RDC3210=y +# CONFIG_MTD_SC520CDP is not set +# CONFIG_MTD_NETSC520 is not set +# CONFIG_MTD_TS5500 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_IMQ=m +# CONFIG_IMQ_BEHAVIOR_AA is not set +# CONFIG_IMQ_BEHAVIOR_AB is not set +CONFIG_IMQ_BEHAVIOR_BA=y +# CONFIG_IMQ_BEHAVIOR_BB is not set +CONFIG_IMQ_NUM_DEVS=2 +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=m +# CONFIG_TYPHOON is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_R6040=y +# CONFIG_B44 is not set +CONFIG_FORCEDETH=m +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=m +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=m +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=m +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_SIS900=m +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +CONFIG_VIA_RHINE=m +# CONFIG_VIA_RHINE_MMIO is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +CONFIG_SIS190=m +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +CONFIG_NET_WIRELESS_RTNETLINK=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_IPW2100=m +CONFIG_IPW2100_MONITOR=y +# CONFIG_IPW2100_DEBUG is not set +CONFIG_IPW2200=m +CONFIG_IPW2200_MONITOR=y +CONFIG_IPW_QOS=y +# CONFIG_IPW2200_DEBUG is not set +CONFIG_AIRO=m +CONFIG_HERMES=m +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +# CONFIG_NORTEL_HERMES is not set +CONFIG_PCI_HERMES=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_PRISM54=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_BCM43XX=m +CONFIG_BCM43XX_DEBUG=y +CONFIG_BCM43XX_DMA=y +CONFIG_BCM43XX_PIO=y +CONFIG_BCM43XX_DMA_AND_PIO_MODE=y +# CONFIG_BCM43XX_DMA_MODE is not set +# CONFIG_BCM43XX_PIO_MODE is not set +CONFIG_NET_WIRELESS=y + +# +# Wan interfaces +# +# CONFIG_WAN is not set + +# +# ATM drivers +# +CONFIG_ATM_DUMMY=m +CONFIG_ATM_TCP=m +# CONFIG_ATM_LANAI is not set +# CONFIG_ATM_ENI is not set +# CONFIG_ATM_FIRESTREAM is not set +# CONFIG_ATM_ZATM is not set +# CONFIG_ATM_NICSTAR is not set +# CONFIG_ATM_IDT77252 is not set +# CONFIG_ATM_AMBASSADOR is not set +# CONFIG_ATM_HORIZON is not set +# CONFIG_ATM_IA is not set +# CONFIG_ATM_FORE200E_MAYBE is not set +# CONFIG_ATM_HE is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPPOATM=m +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +# CONFIG_SERIAL_8250_SHARE_IRQ is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_I8XX_TCO is not set +CONFIG_SC1200_WDT=m +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +# CONFIG_HW_RANDOM is not set +CONFIG_NVRAM=y +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_MWAVE is not set +# CONFIG_CS5535_GPIO is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=m +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +CONFIG_SCx200_ACB=m +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# +# CONFIG_IBM_ASM is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# +# CONFIG_EDAC is not set + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_OCFS2_FS is not set +CONFIG_MINIX_FS=m +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_SQUASHFS_VMALLOC is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set +CONFIG_EARLY_PRINTK=y +CONFIG_STACK_BACKTRACE_COLS=2 +CONFIG_DOUBLEFAULT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_AES_586=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# +# CONFIG_CRYPTO_DEV_PADLOCK is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_KTIME_SCALAR=y diff --git a/target/linux/rdc-2.6/patches/000-rdc_fixes.patch b/target/linux/rdc-2.6/patches/000-rdc_fixes.patch new file mode 100644 index 00000000000..4a75f5fca13 --- /dev/null +++ b/target/linux/rdc-2.6/patches/000-rdc_fixes.patch @@ -0,0 +1,861 @@ +diff -urN linux-2.6.17/arch/i386/Kconfig linux-2.6.17.new/arch/i386/Kconfig +--- linux-2.6.17/arch/i386/Kconfig 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17.new/arch/i386/Kconfig 2006-10-07 22:33:09.000000000 +0200 +@@ -167,6 +167,14 @@ + Only choose this option if you have such a system, otherwise you + should say N here. + ++config X86_RDC ++ bool "Support for RDC 3211 boards" ++ help ++ Support for RDC 3211 sustems. Say 'Y' here if ther kernel is ++ supposed to run on an IA-32 RDC R3211 system. ++ Only choose this option if you have such as system, otherwise you ++ should say N here. ++ + endchoice + + config ACPI_SRAT +diff -urN linux-2.6.17/arch/i386/kernel/time.c linux-2.6.17.new/arch/i386/kernel/time.c +--- linux-2.6.17/arch/i386/kernel/time.c 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17.new/arch/i386/kernel/time.c 2006-10-07 22:23:05.000000000 +0200 +@@ -479,7 +479,8 @@ + return; + } + #endif +- xtime.tv_sec = get_cmos_time(); ++ /* RDC board does not have CMOS */ ++ xtime.tv_sec = 0; + xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); +diff -urN linux-2.6.17/arch/i386/mach-rdc/led.c linux-2.6.17.new/arch/i386/mach-rdc/led.c +--- linux-2.6.17/arch/i386/mach-rdc/led.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17.new/arch/i386/mach-rdc/led.c 2006-10-07 23:55:59.000000000 +0200 +@@ -0,0 +1,743 @@ ++/* ++ * LED interface for WP3200 ++ * ++ * Copyright (C) 2002, by Allen Hung ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "led.h" ++ ++#define BUF_LEN 30 ++ ++struct LED_DATA { ++ char sts_buf[BUF_LEN+1]; ++ unsigned long sts; ++}; ++ ++struct LED_DATA led_data[LED_DEV_NUM]; ++// sam ++unsigned long ul_ledstat = 0xffffffff; ++ ++ ++static struct timer_list blink_timer[LED_DEV_NUM]; ++// sam 01-30-2004 for watchdog ++static struct timer_list watchdog; ++// end sam ++static char cmd_buf[BUF_LEN+1]; ++ ++//------------------------------------------------------------ ++static long atoh(char *p) ++{ ++ long v = 0, c; ++ while ( (c = *p++) ) { ++ if ( c >= '0' && c <= '9' ) v = (v << 4) + c - '0'; ++ else if ( c >= 'a' && c <= 'f' ) v = (v << 4) + c - 'a' + 0xA; ++ else if ( c >= 'A' && c <= 'F' ) v = (v << 4) + c - 'A' + 0xA; ++ else break; ++ } ++ return v; ++} ++ ++static int reset_flash_default(void *data) ++{ ++ char *argv[3], *envp[1] = {NULL}; ++ int i = 0; ++ ++ int reset_default=(int) data; ++ ++ argv[i++] = "/bin/flash"; ++ argv[i++] = "default"; ++ argv[i] = NULL; ++ if(reset_default) ++ if (call_usermodehelper(argv[0], argv, envp, 1)) ++ printk("failed to Reset to default\n"); ++ machine_restart(0); ++ return 0; ++} ++ ++// sam for ps 3205U -- using CSx1 (0xb0e00000) ++// bit map as following ++// BIT 1 2 3 4 5 ++// POWER WLEN PORT1 PORT2 PORT3 ++// ++// value 0 --> led on ++// value 1 --> led off ++ ++#define _ROUTER_ ++ ++#ifdef _ROUTER_ ++ #define LED_VAL 0x8000384C // the data ofset of gpio 0~30 ++#else ++ #define LED_VAL 0x80003888 // the ofset of gpio 31~58 ++#endif ++#define GPIO_VAL 0x8000384C // the offset of gpio 0-30 ++ ++ ++ ++// sam 1-30-2004 LED status ++// bit map as following ++// BIT 4:0 Link status -->PHY Link ->1 = up, 0 = down ++#define LINK_STATUS (*(unsigned long *)0xb2000014) ++#define WATCHDOG_VAL (*(unsigned long *)0xb20000c0) ++#define WATCHDOG_PERIOD 500 // unit ms ++#define EXPIRE_TIME 300 // unit 10 ms ++#define CLEAR_TIMEER 0xffffa000l // bit 14:0 -> count up timer, write 0 to clear ++#define ENABLE_WATCHDOG 0x80000000l // bit 31 -> 1 enable , 0 disable watchdog ++#define WATCHDOG_SET_TMR_SHIFT 16 // bit 16:30 -> watchdog timer set ++// end sam ++ ++ ++//------------------------------------------------------------ ++static void turn_led(int id, int on) ++{ ++ unsigned long led_bit = 1 << (id); ++ unsigned long led_bit_val; ++ ++ // since we define we have 8 led devices and use gpio 53, 55, 57, 58 ++ // which locate at bit21~26, so we rotate left 20bit ++ ++#ifdef _ROUTER_ ++ led_bit_val = led_bit; ++#else ++ led_bit_val = led_bit << 20; ++#endif ++ ++ switch ( on ) { ++ case 0: ++ ul_ledstat|= led_bit_val; ++ outl(LED_VAL, 0xcf8); ++ outl(ul_ledstat, 0xcfc); ++ break; // LED OFF ++ case 1: ++ ul_ledstat &= ~led_bit_val; ++ outl(LED_VAL, 0xcf8); ++ outl(ul_ledstat, 0xcfc); ++ break; // LED ON ++ case 2: ++ ul_ledstat ^= led_bit_val; ++ outl(LED_VAL, 0xcf8); ++ outl(ul_ledstat, 0xcfc); ++ break; // LED inverse ++ } ++} ++ ++ ++static int led_flash[30]={20,10,100,5,5,150,100,5,5,50,20,50,50,20,60,5,20,10,30,10,5,10,50,2,5,5,5,70,10,50};//Erwin ++static unsigned int wlan_counter; //Erwin ++static void blink_wrapper(u_long id) ++{ ++ u_long sts = led_data[id].sts; ++ ++ if ( (sts & LED_BLINK_CMD) == LED_BLINK_CMD ) { ++ unsigned long period = sts & LED_BLINK_PERIOD; ++ if(period == 0xffff) // BLINK random ++ { ++ blink_timer[id].expires = jiffies + 3*led_flash[wlan_counter%30]*HZ/1000; ++ wlan_counter++; ++ } ++ else ++ blink_timer[id].expires = jiffies + (period * HZ / 1000); ++ turn_led(id, 2); ++ add_timer(&blink_timer[id]); ++ } ++ else if ( sts == LED_ON || sts == LED_OFF ) ++ turn_led(id, sts==LED_ON ? 1 : 0); ++} ++//------------------------------------------------------------ ++static void get_token_str(char *str, char token[][21], int token_num) ++{ ++ int t, i; ++ ++ for ( t = 0 ; t < token_num ; t++ ) { ++ memset(token[t], 0, 21); ++ while ( *str == ' ' ) str++; ++ for ( i = 0 ; str[i] ; i++ ) { ++ if ( str[i] == '\t' || str[i] == ' ' || str[i] == '\n' ) break; ++ if ( i < 20 ) token[t][i] = str[i]; ++ } ++ str += i; ++ } ++} ++ ++//------------------------------------------------------------ ++static void set_led_status_by_str(int id) ++{ ++ char token[3][21], *p; ++ ++ ++ get_token_str(led_data[id].sts_buf, token, 3); ++ ++ if ( strcmp(token[0], "LED") ) ++ { ++ goto set_led_off; ++ } ++ if ( !strcmp(token[1], "ON") ) ++ { ++ ++ turn_led(id, 1); ++ led_data[id].sts = LED_ON; ++ } ++ else if ( !strcmp(token[1], "OFF") ) ++ { ++ ++ goto set_led_off; ++ } ++ else if ( !strcmp(token[1], "BLINK") ) ++ { ++ unsigned int period = 0; ++ p = token[2]; ++ if ( !strcmp(p, "FAST") ) ++ period = LED_BLINK_FAST & LED_BLINK_PERIOD; ++ else if ( !strcmp(p, "SLOW") ) ++ period = LED_BLINK_SLOW & LED_BLINK_PERIOD; ++ else if ( !strcmp(p, "EXTRA_SLOW") ) ++ period = LED_BLINK_EXTRA_SLOW & LED_BLINK_PERIOD; ++ else if ( !strcmp(p, "RANDOM") ) ++ period = LED_BLINK_RANDOM & LED_BLINK_PERIOD; ++ else if ( !strcmp(p, "OFF") ) ++ goto set_led_off; ++ else if ( *p >= '0' && *p <= '9' ) ++ { ++ while ( *p >= '0' && *p <= '9' ) ++ period = period * 10 + (*p++) - '0'; ++// if ( period > 10000 ) ++// period = 10000; ++ } ++ else ++ period = LED_BLINK & LED_BLINK_PERIOD; ++ ++ if ( period == 0 ) ++ goto set_led_off; ++ ++ sprintf(led_data[id].sts_buf, "LED BLINK %d\n", period); ++ led_data[id].sts = LED_BLINK_CMD + period; ++ turn_led(id, 2); ++ // Set timer for next blink ++ del_timer(&blink_timer[id]); ++ blink_timer[id].function = blink_wrapper; ++ blink_timer[id].data = id; ++ init_timer(&blink_timer[id]); ++ ++ blink_timer[id].expires = jiffies + (1000 * HZ / 1000); ++ ++ add_timer(&blink_timer[id]); ++ } ++ else ++ { ++ goto set_led_off; ++ } ++ return; ++ set_led_off: ++ strcpy(led_data[id].sts_buf, "LED OFF\n"); ++ led_data[id].sts = LED_OFF; ++ turn_led(id, 0); ++} ++ ++//---------------------------------------------------------------------- ++static int led_read_proc(char *buf, char **start, off_t fpos, int length, int *eof, void *data) ++{ ++ int len, dev; ++ ++ for ( len = dev = 0 ; dev < LED_DEV_NUM ; dev++ ) { ++ len += sprintf(buf+len, "%d: %s", dev, led_data[dev].sts_buf); ++ } ++ len = strlen(buf) - fpos; ++ if ( len <= 0 ) { ++ *start = buf; ++ *eof = 1; ++ return 0; ++ } ++ *start = buf + fpos; ++ if ( len <= length ) *eof = 1; ++ return len < length ? len : length; ++} ++ ++//---------------------------------------------------------------------- ++static int led_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int id = (int)file->private_data; ++ ++ switch ( cmd ) { ++ case LED_ON: ++ strcpy(led_data[id].sts_buf, "LED ON\n"); ++ set_led_status_by_str(id); ++ break; ++ case LED_OFF: ++ strcpy(led_data[id].sts_buf, "LED OFF\n"); ++ set_led_status_by_str(id); ++ break; ++ default: ++ if ( (cmd & LED_BLINK_CMD) != LED_BLINK_CMD ) ++ { ++ break; ++ } ++ case LED_BLINK: ++ case LED_BLINK_FAST: ++ case LED_BLINK_SLOW: ++ case LED_BLINK_EXTRA_SLOW: ++ case LED_BLINK_RANDOM: ++ sprintf(led_data[id].sts_buf, "LED BLINK %d\n", (int)(cmd & LED_BLINK_PERIOD)); ++ set_led_status_by_str(id); ++ break; ++ } ++ return 0; ++} ++ ++static int led_open(struct inode *inode, struct file *file) ++{ ++ int led_id = MINOR(inode->i_rdev); ++// unsigned long led_bit = 1 << (led_id); ++ ++ if ( led_id >= LED_DEV_NUM ) ++ return -ENODEV; ++/* sam 12/02/2003 ++ GPIO_SEL_I_O &= ~led_bit; // 0 to GPIO ++ GPIO_O_EN |= (led_bit << 16); // 0 to Output ++*/ ++ ++ file->private_data = (void*)led_id; ++ return 0; ++} ++ ++static long led_read(struct file *file, char *buf, size_t count, loff_t *fpos) ++{ ++ int rem, len; ++ int id = (int)file->private_data; ++ char *p = led_data[id].sts_buf; ++ ++ len = strlen(p); ++ rem = len - *fpos; ++ if ( rem <= 0 ) { ++ *fpos = len; ++ return 0; ++ } ++ if ( rem > count ) rem = count; ++ memcpy(buf, p+(*fpos), rem); ++ *fpos += rem; ++ return rem; ++} ++ ++static long led_write(struct file *file, char *buf, size_t count, loff_t *fpos) ++{ ++ int len; ++ int id = (int)file->private_data; ++ char *p = id == REG_MINOR ? cmd_buf : led_data[id].sts_buf; ++ memset(p, 0, BUF_LEN); ++ ++ p += *fpos; ++ len = 0; ++ ++ ++ while ( count > 0 ) ++ { ++ ++ if ( *fpos < BUF_LEN ) ++ { ++ int c = *buf++; ++ p[len] = c>='a' && c<='z' ? c-'a'+'A' : c; ++ } ++ (*fpos)++; ++ len++; ++ count--; ++ } ++ // sam ++ set_led_status_by_str(id); ++ (*fpos) = 0; ++ // ++ ++ return len; ++} ++ ++static int led_flush(struct file *file) ++{ ++ int id = (int)file->private_data; ++ ++ if ( file->f_mode & FMODE_WRITE ) ++ { ++ set_led_status_by_str(id); ++ } ++ return 0; ++} ++ ++static struct file_operations led_fops = { ++ read: led_read, ++ write: led_write, ++ flush: led_flush, ++ ioctl: led_ioctl, ++ open: led_open, ++}; ++ ++//---------------------------------------------- ++static unsigned long *reg_addr; ++static int dump_len; ++ ++static int dump_content(char *buf) ++{ ++ return 0; ++} ++ ++static long gpio_read(struct file *file, char *buf, size_t count, loff_t *fpos) ++{ ++ int rem, len; ++ int id = (int)file->private_data; ++ char temp[80*10]; ++ unsigned long gpio_regval =0; ++ ++ outl(GPIO_VAL, 0xcf8); ++ gpio_regval = inl(0xcfc); ++ gpio_regval |= 0x40; ++ outl(gpio_regval, 0xcfc); // each in, need out 1 first ++ gpio_regval = inl(0xcfc); ++ ++ ++ // sam debug ++ //printk(KERN_ERR "gpio_id:%d, gpio_regval:%08X\n", id, gpio_regval); ++ //end sam ++ ++ if ( id < GPIO_DEV_NUM ) { ++ int gpio_bit = 1 << id; ++ ++ len = sprintf(temp, "%d\n", (gpio_regval & gpio_bit) ? 1 : 0); ++ } ++ else // REG device ++ len = dump_content(temp); ++ rem = len - *fpos; ++ if ( rem <= 0 ) { ++ *fpos = len; ++ return 0; ++ } ++ if ( rem > count ) rem = count; ++ memcpy(buf, temp+(*fpos), rem); ++ *fpos += rem; ++ return rem; ++} ++ ++static int gpio_flush(struct file *file) ++{ ++ return 0; ++} ++ ++static int gpio_open(struct inode *inode, struct file *file) ++{ ++ int id = MINOR(inode->i_rdev); ++ if ( id >= GPIO_DEV_NUM && id != REG_MINOR ) ++ return -ENODEV; ++ file->private_data = (void*)id; ++ return 0; ++} ++ ++static struct file_operations gpio_fops = { ++ read: gpio_read, ++ open: gpio_open, ++ flush: gpio_flush, ++ write: led_write, ++}; ++ ++// --------------------------------------------- ++// sam 1-30-2004 LAN_STATUS Device ++ ++//static unsigned long *reg_addr; ++//static int dump_len; ++ ++//static int lanSt_content(char *buf) ++//{ ++// int i, j, len; ++// unsigned long *p = (unsigned long *)0xb2000014; // PHY_ST ++// // j = dump_len/4 + ((dump_len&3) ? 1 : 0); ++// len = sprintf(buf, "Reg Addr = %08lX, Value = \n", (unsigned long)p); ++// // for ( i = 0 ; i < j ; i++, p++ ) ++// len += sprintf(buf+len,"%08lX\n", *p); ++ ++// return len; ++//} ++ ++#define MAC_IOBASE 0xe800 // Eth0 ++#define PHY_ADDR 1 // For Eth0 ++#define MII_STATUS_ADDR 1 ++// where "id" value means which bit of PHY reg 1 we want to check ++static long lanSt_read(struct file *file, char *buf, size_t count, loff_t *fpos) ++{ ++ int rem, len; ++// unsigned long *p = (unsigned long *)0xb2000014; // PHY_ST ++ unsigned short status; ++ unsigned int i = 0; ++ int id = (int)file->private_data; ++ char temp[80*10]; ++ ++ outw(0x2000 + MII_STATUS_ADDR + (PHY_ADDR << 8), MAC_IOBASE + 0x20); ++ do{}while( (i++ < 2048) && (inw(MAC_IOBASE+0x20) & 0x2000) ); ++ ++ status = inw(MAC_IOBASE + 0x24); ++ ++ // sam debug ++ //printk(KERN_ERR "PHY REG1 Status:%04x\n", status ); ++ // end sam ++ ++ if ( id < LAN_DEV_NUM ) { ++ unsigned long lanSt_bit = 1 << id; ++// len = lanSt_content(temp); ++ len = sprintf(temp, "%d\n",(status & lanSt_bit) ? 1 : 0); ++ } ++ else // REG device ++ { ++ len = sprintf(temp, "-1\n"); ++ } ++ rem = len - *fpos; ++ if ( rem <= 0 ) { ++ *fpos = len; ++ return 0; ++ } ++ if ( rem > count ) rem = count; ++ memcpy(buf, temp+(*fpos), rem); ++ *fpos += rem; ++ return rem; ++} ++ ++static int lanSt_flush(struct file *file) ++{ ++ return 0; ++} ++ ++static int lanSt_open(struct inode *inode, struct file *file) ++{ ++ int id = MINOR(inode->i_rdev); ++ if ( id >= LAN_DEV_NUM && id != REG_MINOR ) ++ return -ENODEV; ++ file->private_data = (void*)id; ++ return 0; ++} ++ ++static struct file_operations lanSt_fops = { ++ read: lanSt_read, ++ open: lanSt_open, ++ flush: lanSt_flush, ++ write: led_write, ++}; ++ ++//---------------------------------------------- ++static int SwResetPress = 0; ++static int SwResetCounter = 0; ++static int RebootFlag = 0; ++static void watchdog_wrapper(unsigned int period) ++{ ++ // { RexHua add for restore default, by press SwReset 5 second, 2 sec to restart ++#if 0 // ++ u_long reg; ++ ++ outl(GPIO_VAL, 0xcf8); ++ reg = inl(0xcfc); ++ reg |= 0x40; ++ outl(reg, 0xcfc); // each in, need out 1 first ++ reg = inl(0xcfc); ++ ++ if( (reg & 0x40) == 0) ++ { ++ if(SwResetPress == 0) ++ { ++ SwResetCounter=0; ++ strcpy(led_data[15].sts_buf, "LED BLINK 500\n" ); ++ set_led_status_by_str(15); ++ } ++ SwResetPress=1; ++ printk("SwReset press!\n"); ++ ++ } ++ else ++ { ++ if(SwResetPress=1) ++ { ++ strcpy(led_data[15].sts_buf, "LED ON\n" ); ++ set_led_status_by_str(15); ++ } ++ ++ SwResetPress=0; ++ if(RebootFlag == 1) ++ machine_restart(0); ++ } ++ ++ if(SwResetPress == 1) ++ { ++ if(SwResetCounter > 10) ++ { ++ turn_led(15, 0); ++// kernel_thread(reset_flash_default, 1, SIGCHLD); ++ reset_flash_default(1); ++ turn_led(15, 1); ++ } ++ else if(SwResetCounter == 3) ++ { ++ RebootFlag=1; ++ strcpy(led_data[15].sts_buf, "LED BLINK 100\n" ); ++ set_led_status_by_str(15); ++ } ++ } ++ ++ SwResetCounter++; ++#endif ++ ++ // clear timer count ++ outl(0x80003844, 0xcf8); ++ outl(0x00800080, 0xcfc); // enable watchdog and set the timeout = 1.34s ++ //printk(KERN_ERR "wdt\n" ); ++ watchdog.expires = jiffies + (period * HZ / 1000); ++ add_timer(&watchdog); ++} ++ ++//---------------------------------------------- ++static int init_status; ++ ++#define INIT_REGION 0x01 ++#define INIT_LED_REGISTER 0x02 ++#define INIT_LED_PROC_READ 0x04 ++#define INIT_GPIO_REGISTER 0x08 ++// sam 1-30-2004 LAN_STATUS ++#define INIT_LAN_STATUS_REGISTER 0x10 ++#define INIT_WATCHDOG_REGISTER 0x20 ++ ++static void led_exit(void) ++{ ++ int id; ++ for ( id = 0 ; id < LED_DEV_NUM ; id++ ) { ++ del_timer(&blink_timer[id]); ++ turn_led(id, 0); ++ } ++ if ( init_status & INIT_LED_PROC_READ ) ++ remove_proc_entry("driver/led", NULL); ++ ++ if ( init_status & INIT_LED_REGISTER ) ++ unregister_chrdev(LED_MAJOR, "led"); ++ ++ if ( init_status & INIT_GPIO_REGISTER ) ++ unregister_chrdev(GPIO_MAJOR, "gpio"); ++ // sam 1-30-2004 ++ ++ if( init_status & INIT_LAN_STATUS_REGISTER ) ++ unregister_chrdev(LAN_STATUS_MAJOR, "lanSt"); ++ ++ if( init_status & INIT_WATCHDOG_REGISTER) ++ del_timer(&watchdog); ++ ++ ++ // end sam ++ ++} ++ ++static int __init led_init(void) ++{ ++ int result, id, i, j; ++ unsigned long reg; ++ init_status = 0; ++ ++ //----- register device (LED)------------------------- ++ ++ ++ result = register_chrdev(LED_MAJOR, "led", &led_fops); ++ if ( result < 0 ) { ++ printk(KERN_ERR "led: can't register char device\n" ); ++ led_exit(); ++ return result; ++ } ++ init_status |= INIT_LED_REGISTER; ++ //----- register device (GPIO)------------------------- ++ result = register_chrdev(GPIO_MAJOR, "gpio", &gpio_fops); ++ if ( result < 0 ) { ++ printk(KERN_ERR "gpio: can't register char device\n" ); ++ led_exit(); ++ return result; ++ } ++ init_status |= INIT_GPIO_REGISTER; ++ ++ // sam 1-30-2004 LAN Status ++ // ----- register device (LAN_STATUS)------------------- ++ ++ //--> sam 5-1802995 ++ ++ result = register_chrdev(LAN_STATUS_MAJOR, "lanSt", &lanSt_fops); ++ if ( result < 0 ) { ++ printk(KERN_ERR "lanSt: can't register char device\n" ); ++ led_exit(); ++ return result; ++ } ++ init_status |= INIT_LAN_STATUS_REGISTER; ++ ++ // <-- end sam ++ ++ // -----------init watchdog timer------------------------- ++ //del_timer(&blink_timer[id]); ++ ++ outl(0x80003840, 0xcf8); ++ reg = inl(0xcfc); ++ reg |= 0x1600; // ensable SRC bit ++ outl(reg, 0xcfc); ++#ifdef _ROUTER_ ++ outl(0x80003848, 0xcf8); ++ reg = inl(0xcfc); ++ reg |= 0x18040; // enable GPIO, PowerLED:15, WLAN_LED0:16, SwReset:6 ++ outl(reg, 0xcfc); ++ ++ outl(0x8000384c, 0xcf8); ++ reg = inl(0xcfc); ++ reg |= 0x40; // output SwReset:6 1, Set SwReset as Input ++ outl(reg, 0xcfc); ++#endif ++ // sam debug ++ //reg = inl(0xcfc); ++ //printk(KERN_ERR "REG40:%08X\n", reg); ++ // end sam ++ outl(0x80003844, 0xcf8); ++ outl(0x00800080, 0xcfc); // enable watchdog and set the timeout = 1.34s ++ ++ watchdog.function = watchdog_wrapper; ++ watchdog.data = WATCHDOG_PERIOD; ++ init_timer(&watchdog); ++ watchdog.expires = jiffies + (WATCHDOG_PERIOD * HZ / 1000); ++ add_timer(&watchdog); ++ init_status |= INIT_WATCHDOG_REGISTER; ++ ++ // end sam ++ //------ read proc ------------------- ++ if ( !create_proc_read_entry("driver/led", 0, 0, led_read_proc, NULL) ) { ++ printk(KERN_ERR "led: can't create /proc/driver/led\n"); ++ led_exit(); ++ return -ENOMEM; ++ } ++ init_status |= INIT_LED_PROC_READ; ++ //------------------------------ ++// reg_addr = (unsigned long *)0xB4000000; ++// dump_len = 4; ++ ++ for ( id = 0 ; id < LED_DEV_NUM ; id++ ) { ++ strcpy(led_data[id].sts_buf, "LED ON\n" ); ++ set_led_status_by_str(id); ++ } ++ ++// for (i = 0; i < 0xffff; i++) ++// for (j = 0; j < 0x6000; j++); ++ ++/* sam 5-18-2005 remark ++ for ( id = 0 ; id < LED_DEV_NUM ; id++ ) { ++ strcpy(led_data[id].sts_buf, "LED ON\n" ); ++ set_led_status_by_str(id); ++ } ++*/ ++ printk(KERN_INFO "LED & GPIO & LAN Status Driver LED_VERSION \n"); ++ return 0; ++} ++ ++module_init(led_init); ++module_exit(led_exit); ++EXPORT_NO_SYMBOLS; +diff -urN linux-2.6.17/arch/i386/mach-rdc/led.h linux-2.6.17.new/arch/i386/mach-rdc/led.h +--- linux-2.6.17/arch/i386/mach-rdc/led.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17.new/arch/i386/mach-rdc/led.h 2006-10-07 22:28:32.000000000 +0200 +@@ -0,0 +1,32 @@ ++#ifndef _LED_H_INCLUDED ++#define _LED_H_INCLUDED ++ ++#include ++ ++#define LED_VERSION "v1.0" ++#define LED_MAJOR 166 ++#define LED_DEV_NUM 32 ++#define LED_GPIO_START 1 ++#define GPIO_MAJOR 167 ++#define GPIO_DEV_NUM 32 ++#define REG_MINOR 128 ++// sam 1-30-2004 for LAN_STATUS ++#define LAN_STATUS_MAJOR 168 ++#define LAN_DEV_NUM 5 ++// end sam ++ ++//#define GPIO_IO_BASE 0xB4002480 ++//#define GPIO_IO_BASE ((unsigned long)0xb20000b8) ++//#define GPIO_IO_EXTENT 0x40 ++ ++#define LED_ON 0x010000 ++#define LED_OFF 0x020000 ++#define LED_BLINK_CMD 0x030000 ++#define LED_BLINK_PERIOD 0x00FFFF ++#define LED_BLINK (LED_BLINK_CMD|1000) ++#define LED_BLINK_FAST (LED_BLINK_CMD|250) ++#define LED_BLINK_SLOW (LED_BLINK_CMD|500) ++#define LED_BLINK_EXTRA_SLOW (LED_BLINK_CMD|2000) ++#define LED_BLINK_RANDOM (LED_BLINK_CMD|0xffff) ++ ++#endif +diff -urN linux-2.6.17/arch/i386/mach-rdc/Makefile linux-2.6.17.new/arch/i386/mach-rdc/Makefile +--- linux-2.6.17/arch/i386/mach-rdc/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17.new/arch/i386/mach-rdc/Makefile 2006-10-07 22:31:19.000000000 +0200 +@@ -0,0 +1,5 @@ ++# ++# Makefile for the linux kernel. ++# ++ ++obj-$(CONFIG_X86_RDC) := led.o +diff -urN linux-2.6.17/arch/i386/Makefile linux-2.6.17.new/arch/i386/Makefile +--- linux-2.6.17/arch/i386/Makefile 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17.new/arch/i386/Makefile 2006-10-07 23:56:13.000000000 +0200 +@@ -80,6 +80,10 @@ + mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-i386/mach-es7000 + mcore-$(CONFIG_X86_ES7000) := mach-default + core-$(CONFIG_X86_ES7000) := arch/i386/mach-es7000/ ++# RDC subarch support ++mflags-$(CONFIG_X86_RDC) := -Iinclude/asm-i386/mach-generic ++mcore-$(CONFIG_X86_RDC) := mach-default ++core-$(CONFIG_X86_RDC) := arch/i386/mach-rdc/ + + # default subarch .h files + mflags-y += -Iinclude/asm-i386/mach-default +diff -urN linux-2.6.17/arch/i386/mm/fault.c linux-2.6.17.new/arch/i386/mm/fault.c +--- linux-2.6.17/arch/i386/mm/fault.c 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17.new/arch/i386/mm/fault.c 2006-10-07 22:24:15.000000000 +0200 +@@ -551,6 +551,7 @@ + tsk->thread.cr2 = address; + tsk->thread.trap_no = 14; + tsk->thread.error_code = error_code; ++ machine_restart(NULL); /* Added for RDC */ + die("Oops", regs, error_code); + bust_spinlocks(0); + do_exit(SIGKILL); +@@ -566,6 +567,12 @@ + down_read(&mm->mmap_sem); + goto survive; + } ++ /* RDC : Forcing processes to be niced */ ++ if (tsk->prio < 0) { ++ printk("VM: niced process %s\n", tsk->comm); ++ yield(); ++ goto survive; ++ } + printk("VM: killing process %s\n", tsk->comm); + if (error_code & 4) + do_exit(SIGKILL); diff --git a/target/linux/rdc-2.6/patches/001-rdc3210_flash_map.patch b/target/linux/rdc-2.6/patches/001-rdc3210_flash_map.patch new file mode 100644 index 00000000000..a3d2ac6b74a --- /dev/null +++ b/target/linux/rdc-2.6/patches/001-rdc3210_flash_map.patch @@ -0,0 +1,271 @@ +diff -urN linux-2.6.17/drivers/mtd/maps/imghdr.h linux-2.6.17.new/drivers/mtd/maps/imghdr.h +--- linux-2.6.17/drivers/mtd/maps/imghdr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17.new/drivers/mtd/maps/imghdr.h 2006-09-24 20:29:20.000000000 +0200 +@@ -0,0 +1,25 @@ ++#ifndef GT_IMGHDR_H ++#define GT_IMGHDR_H ++ ++#define GTIMG_MAGIC "GMTK" ++ ++/* Product ID */ ++#define PID_RTL_AIRGO 1 ++#define PID_RTL_RALINK 2 ++#define PID_RDC_AIRGO 3 ++#define PID_RDC_RALINK 5 /* White Lable */ ++ ++/* Gemtek */ ++typedef struct ++{ ++ UINT8 magic[4]; /* ASICII: GMTK */ ++ UINT32 checksum; /* CRC32 */ ++ UINT32 version; /* x.x.x.x */ ++ UINT32 kernelsz; /* The size of the kernel image */ ++ UINT32 imagesz; /* The length of this image file ( kernel + romfs + this header) */ ++ UINT32 pid; /* Product ID */ ++ UINT32 fastcksum; /* Partial CRC32 on (First(256), medium(256), last(512)) */ ++ UINT32 reserved; ++}gt_imghdr_t; ++ ++#endif +diff -urN linux-2.6.17/drivers/mtd/maps/Kconfig linux-2.6.17.new/drivers/mtd/maps/Kconfig +--- linux-2.6.17/drivers/mtd/maps/Kconfig 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17.new/drivers/mtd/maps/Kconfig 2006-09-24 20:28:11.000000000 +0200 +@@ -76,6 +76,12 @@ + PNC-2000 is the name of Network Camera product from PHOTRON + Ltd. in Japan. It uses CFI-compliant flash. + ++config MTD_RDC3210 ++ tristate "CFI Flash devcie mapped on RDC3210" ++ depends on X86 && MTD_CFI && MTD_PARTITIONS ++ help ++ RDC-3210 is the flash device we find on Ralink reference board ++ + config MTD_SC520CDP + tristate "CFI Flash device mapped on AMD SC520 CDP" + depends on X86 && MTD_CFI +diff -urN linux-2.6.17/drivers/mtd/maps/Makefile linux-2.6.17.new/drivers/mtd/maps/Makefile +--- linux-2.6.17/drivers/mtd/maps/Makefile 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17.new/drivers/mtd/maps/Makefile 2006-09-24 20:26:10.000000000 +0200 +@@ -28,6 +28,7 @@ + obj-$(CONFIG_MTD_PHYSMAP) += physmap.o + obj-$(CONFIG_MTD_PNC2000) += pnc2000.o + obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o ++obj-$(CONFIG_MTD_RDC3210) += rdc3210.o + obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o + obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o + obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o +diff -urN linux-2.6.17/drivers/mtd/maps/rdc3210.c linux-2.6.17.new/drivers/mtd/maps/rdc3210.c +--- linux-2.6.17/drivers/mtd/maps/rdc3210.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17.new/drivers/mtd/maps/rdc3210.c 2006-09-24 22:55:20.000000000 +0200 +@@ -0,0 +1,211 @@ ++/******************************************************************* ++ * Simple Flash mapping for RDC3210 * ++ * * ++ * 2005.03.23 * ++ * Dante Su (dante_su@gemtek.com.tw) * ++ * Copyright (C) 2005 Gemtek Corporation * ++ *******************************************************************/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define WINDOW_ADDR 0xFFC00000 ++#define WINDOW_SIZE 0x00400000 ++ ++#define BUSWIDTH 2 ++ ++static struct mtd_info *rdc3210_mtd_info; ++ ++__u8 rdc3210_map_read8(struct map_info *map, unsigned long ofs) ++{ ++ return *(__u8 *)(map->map_priv_1 + ofs); ++} ++ ++__u16 rdc3210_map_read16(struct map_info *map, unsigned long ofs) ++{ ++ return *(__u16 *)(map->map_priv_1 + ofs); ++} ++ ++__u32 rdc3210_map_read32(struct map_info *map, unsigned long ofs) ++{ ++ return *(__u32 *)(map->map_priv_1 + ofs); ++} ++ ++void rdc3210_map_write8(struct map_info *map, __u8 d, unsigned long adr) ++{ ++ *(__u8 *)(map->map_priv_1 + adr) = d; ++} ++ ++void rdc3210_map_write16(struct map_info *map, __u16 d, unsigned long adr) ++{ ++ *(__u16 *)(map->map_priv_1 + adr) = d; ++} ++ ++void rdc3210_map_write32(struct map_info *map, __u32 d, unsigned long adr) ++{ ++ *(__u32 *)(map->map_priv_1 + adr) = d; ++} ++ ++void rdc3210_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) ++{ ++ int i; ++ u16 *dst = (u16 *)(to); ++ u16 *src = (u16 *)(map->map_priv_1 + from); ++ ++ for(i = 0; i < (len / 2); ++i) ++ dst[i] = src[i]; ++ ++ if(len & 1) ++ { ++ printk("# WARNNING!!! rdc3210_map_copy_from has odd length\n"); ++ //dst[len - 1] = B0(src[i]); ++ } ++} ++ ++void rdc3210_map_copy_to(struct map_info *map, void *to, unsigned long from, ssize_t len) ++{ ++ int i; ++ u16 *dst = (u16 *)(map->map_priv_1 + to); ++ u16 *src = (u16 *)(from); ++ ++ for(i = 0; i < (len / 2); ++i) ++ dst[i] = src[i]; ++ ++ if(len & 1) ++ { ++ printk("# WARNNING!!! rdc3210_map_copy_from has odd length\n"); ++ //dst[len - 1] = B0(src[i]); ++ } ++} ++ ++static struct map_info rdc3210_map = ++{ ++ .name = "RDC3210 Flash", ++ .size = WINDOW_SIZE, ++ .bankwidth = BUSWIDTH, ++ .phys = WINDOW_ADDR, ++}; ++ ++/* Dante: This is the default static mapping, however this is nothing but a hint. (Say dynamic mapping) */ ++static struct mtd_partition rdc3210_parts[] = ++{ ++ { .name = "linux", .offset = 0, .size = 0x003C0000 }, /* 3840 KB = (Kernel + ROMFS) = (768 KB + 3072 KB) */ ++ { .name = "romfs", .offset = 0x000C0000, .size = 0x00300000 }, /* 3072 KB */ ++ { .name = "nvram", .offset = 0x003C0000, .size = 0x00010000 }, /* 64 KB */ ++ { .name = "factory", .offset = 0x003D0000, .size = 0x00010000 }, /* 64 KB */ ++ { .name = "bootldr", .offset = 0x003E0000, .size = 0x00020000 }, /* 128 KB */ ++}; ++ ++static int __init rdc3210_mtd_init(void) ++{ ++ printk(KERN_NOTICE "flash device: 0x%x at 0x%x\n", WINDOW_SIZE, WINDOW_ADDR); ++ ++ rdc3210_map.virt = ioremap(WINDOW_ADDR, WINDOW_SIZE); ++ ++ if (!rdc3210_map.virt) ++ { ++ printk("Failed to ioremap\n"); ++ return -EIO; ++ } ++ ++ simple_map_init(&rdc3210_map); ++ ++ rdc3210_mtd_info = do_map_probe("cfi_probe", &rdc3210_map); ++ /* Dante: This is for fixed map */ ++ if (rdc3210_mtd_info) ++ { ++ rdc3210_mtd_info->owner = THIS_MODULE; ++ add_mtd_partitions(rdc3210_mtd_info, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0])); ++ return 0; ++ } ++ /* Dante: This is for dynamic mapping */ ++#if 0 ++ if (rdc3210_mtd_info) ++ { // Dante ++ unsigned int tmp; ++ gt_imghdr_t *hdr; ++ ++ hdr = (gt_imghdr_t *)(rdc3210_map.virt); ++ ++ if(memcmp(hdr->magic, GTIMG_MAGIC, 4)) ++ { ++ printk("Invalid MAGIC for Firmware Image!!!\n"); ++ return -EIO; ++ } ++ ++ /* 1. Adjust Redboot */ ++ tmp = flashdrv_get_size() - rdc3210_parts[4].size; ++ rdc3210_parts[4].offset = flashdrv_get_sector_addr(flashdrv_get_sector(tmp)); ++ rdc3210_parts[4].size = flashdrv_get_size() - rdc3210_parts[4].offset; ++ ++ /* 2. Adjust NVRAM */ ++ tmp -= rdc3210_parts[3].size; ++ rdc3210_parts[3].offset = flashdrv_get_sector_addr(flashdrv_get_sector(tmp)); ++ rdc3210_parts[3].size = rdc3210_parts[4].offset - rdc3210_parts[3].offset; ++ ++ /* 3. Adjust Factory Default */ ++ tmp -= rdc3210_parts[2].size; ++ rdc3210_parts[2].offset = flashdrv_get_sector_addr(flashdrv_get_sector(tmp)); ++ rdc3210_parts[2].size = rdc3210_parts[3].offset - rdc3210_parts[2].offset; ++ ++ /* 4. Adjust Linux (Kernel + ROMFS) */ ++ rdc3210_parts[0].size = rdc3210_parts[2].offset - rdc3210_parts[0].offset; ++ ++ /* 5. Adjust ROMFS */ ++ tmp = hdr->kernelsz + sizeof(gt_imghdr_t); ++ rdc3210_parts[1].offset = rdc3210_parts[0].offset + (((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32); ++ rdc3210_parts[1].size = rdc3210_parts[2].offset - rdc3210_parts[1].offset; ++ ++ /* 1. Adjust Redboot */ ++ tmp = flashdrv_get_size() - rdc3210_parts[3].size; ++ rdc3210_parts[3].offset = flashdrv_get_sector_addr(flashdrv_get_sector(tmp)); ++ rdc3210_parts[3].size = flashdrv_get_size() - rdc3210_parts[3].offset; ++ ++ /* 2. Adjust NVRAM */ ++ tmp -= rdc3210_parts[2].size; ++ rdc3210_parts[2].offset = flashdrv_get_sector_addr(flashdrv_get_sector(tmp)); ++ rdc3210_parts[2].size = rdc3210_parts[3].offset - rdc3210_parts[2].offset; ++ ++ /* 4. Adjust Linux (Kernel + ROMFS) */ ++ rdc3210_parts[0].size = rdc3210_parts[2].offset - rdc3210_parts[0].offset; ++ ++ /* 5. Adjust ROMFS */ ++ tmp = hdr->kernelsz + sizeof(gt_imghdr_t); ++ rdc3210_parts[1].offset = rdc3210_parts[0].offset + (((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32); ++ rdc3210_parts[1].size = rdc3210_parts[2].offset - rdc3210_parts[1].offset; ++ ++ rdc3210_mtd_info->owner = THIS_MODULE; ++ add_mtd_partitions(rdc3210_mtd_info, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0])); ++ return 0; ++ } ++#endif ++ iounmap((void *)rdc3210_map.virt); ++ return -ENXIO; ++} ++ ++static void __exit rdc3210_mtd_exit(void) ++{ ++ if (rdc3210_mtd_info) ++ { ++ del_mtd_partitions(rdc3210_mtd_info); ++ map_destroy(rdc3210_mtd_info); ++ } ++ ++ if (rdc3210_map.virt) ++ { ++ iounmap(rdc3210_map.virt); ++ rdc3210_map.virt = 0; ++ } ++} ++ ++module_init(rdc3210_mtd_init); ++module_exit(rdc3210_mtd_exit); ++MODULE_LICENSE("GPL"); ++ diff --git a/target/linux/rdc-2.6/patches/002-r6040_ethernet.patch b/target/linux/rdc-2.6/patches/002-r6040_ethernet.patch new file mode 100644 index 00000000000..88a9ea17ea1 --- /dev/null +++ b/target/linux/rdc-2.6/patches/002-r6040_ethernet.patch @@ -0,0 +1,1018 @@ +diff -urN linux-2.6.17/drivers/net/Kconfig linux-2.6.17.new/drivers/net/Kconfig +--- linux-2.6.17/drivers/net/Kconfig 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17.new/drivers/net/Kconfig 2006-09-25 13:14:27.000000000 +0200 +@@ -1358,6 +1358,19 @@ + . The module will be + called apricot. + ++config R6040 ++ tristate "RDC Fast-Ethernet support (EXPERIMENTAL)" ++ depends on NET_PCI && EXPERIMENTAL ++ select MII ++ help ++ If you have a network (Ethernet) controller of this type, say Y and ++ read the Ethernet-HOWTO, available from ++ . ++ ++ To compile this driver as a module, choose M here and read ++ . The module will be ++ called r6040. ++ + config B44 + tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)" + depends on NET_PCI && PCI && EXPERIMENTAL +diff -urN linux-2.6.17/drivers/net/Makefile linux-2.6.17.new/drivers/net/Makefile +--- linux-2.6.17/drivers/net/Makefile 2006-06-18 03:49:35.000000000 +0200 ++++ linux-2.6.17.new/drivers/net/Makefile 2006-09-25 13:14:45.000000000 +0200 +@@ -106,6 +106,7 @@ + obj-$(CONFIG_NE3210) += ne3210.o 8390.o + obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o + obj-$(CONFIG_B44) += b44.o ++obj-$(CONFIG_R6040) += r6040.o + obj-$(CONFIG_FORCEDETH) += forcedeth.o + obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o + +diff -urN linux-2.6.17/drivers/net/r6040.c linux-2.6.17.new/drivers/net/r6040.c +--- linux-2.6.17/drivers/net/r6040.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.17.new/drivers/net/r6040.c 2006-09-25 13:12:41.000000000 +0200 +@@ -0,0 +1,980 @@ ++/* rdc.c: A RDC FastEthernet driver for linux. */ ++/* ++ Re-written 2004 by Sten Wang. ++ ++ Copyright 1994-2000 by Donald Becker. ++ Copyright 1993 United States Government as represented by the ++ Director, National Security Agency. This software may be used and ++ distributed according to the terms of the GNU General Public License, ++ incorporated herein by reference. ++ ++ This driver is for RDC FastEthernet MAC series. ++ For kernel version after 2.4.22 ++ ++ Modification List ++ ---------- ------------------------------------------------ ++ 12-22-2004 Sten Init MAC MBCR register=0x012A ++ PHY_CAP = 0x01E1 ++*/ ++ ++#define FORICPLUS /* Supports ICPlus IP175C switch chip */ ++#define BOOSTRDC /* Accelerate Ethernet performance */ ++ ++#define DRV_NAME "rdc" ++#define DRV_VERSION "0.6" ++#define DRV_RELDATE "9July2004" ++ ++/* PHY CHIP Address */ ++#define PHY1_ADDR 1 /* For MAC1 */ ++#define PHY2_ADDR 2 /* For MAC2 */ ++#define PHY_MODE 0x3100 /* PHY CHIP Register 0 */ ++#define PHY_CAP 0x01E1 /* PHY CHIP Register 4 */ ++ ++/* Time in jiffies before concluding the transmitter is hung. */ ++#define TX_TIMEOUT (400 * HZ / 1000) ++#define TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ ++ ++/* RDC MAC ID */ ++#define RDC_MAC_ID 0x6040 ++ ++/* RDC MAC I/O Size */ ++#define R6040_IO_SIZE 256 ++ ++/* RDC Chip PCI Command */ ++#define R6040_PCI_CMD 0x0005 /* IO, Master */ ++ ++/* MAX RDC MAC */ ++#define MAX_MAC 2 ++ ++/* MAC setting */ ++#ifdef BOOSTRDC ++#define TX_DCNT 32 /* TX descriptor count */ ++#define RX_DCNT 32 /* RX descriptor count */ ++#else ++#define TX_DCNT 0x8 /* TX descriptor count */ ++#define RX_DCNT 0x8 /* RX descriptor count */ ++#endif ++#define MAX_BUF_SIZE 0x600 ++#define ALLOC_DESC_SIZE ((TX_DCNT+RX_DCNT)*sizeof(struct rdc_descriptor)+0x10) ++#define MBCR_DEFAULT 0x012A /* MAC Control Register */ ++ ++/* Debug enable or not */ ++#define RDC_DEBUG 0 ++ ++#if RDC_DEBUG > 1 ++#define RDC_DBUG(msg, value) printk("%s %x\n", msg, value); ++#else ++#define RDC_DBUG(msg, value) ++#endif ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include /* for udelay() */ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++MODULE_AUTHOR("Sten Wang "); ++MODULE_DESCRIPTION("RDC R6040 PCI FastEthernet Driver"); ++MODULE_LICENSE("GPL"); ++ ++//MODULE_PARM(adr_table, "2-4i"); ++MODULE_PARM_DESC(adr_table, "MAC Address (assigned)"); ++ ++struct rdc_descriptor { ++ u16 status, len; /* 0-3 */ ++ u32 buf; /* 4-7 */ ++ u32 ndesc; /* 8-B */ ++ u32 rev1; /* C-F */ ++ char *vbufp; /* 10-13 */ ++ struct rdc_descriptor *vndescp; /* 14-17 */ ++ struct sk_buff *skb_ptr; /* 18-1B */ ++ u32 rev2; /* 1C-1F */ ++} __attribute__(( aligned(32) )); ++ ++struct rdc_private { ++ struct net_device_stats stats; ++ spinlock_t lock; ++ struct timer_list timer; ++ struct pci_dev *pdev; ++ ++ struct rdc_descriptor *rx_insert_ptr; ++ struct rdc_descriptor *rx_remove_ptr; ++ struct rdc_descriptor *tx_insert_ptr; ++ struct rdc_descriptor *tx_remove_ptr; ++ u16 tx_free_desc, rx_free_desc, phy_addr, phy_mode; ++ u16 mcr0, mcr1; ++ dma_addr_t desc_dma; ++ char *desc_pool; ++}; ++ ++struct rdc_chip_info { ++ const char *name; ++ u16 pci_flags; ++ int io_size; ++ int drv_flags; ++}; ++ ++static int __devinitdata printed_version; ++static char version[] __devinitdata = ++ KERN_INFO DRV_NAME ": RDC R6040 net driver, version " ++ DRV_VERSION " (" DRV_RELDATE ")\n"; ++ ++static struct rdc_chip_info rdc_chip_info[] __devinitdata = ++{ ++ { "RDC R6040 Knight", R6040_PCI_CMD, R6040_IO_SIZE, 0} ++}; ++ ++static int phy_table[] = { 0x1, 0x2}; ++static u8 adr_table[2][8] = {{0x00, 0x00, 0x60, 0x00, 0x00, 0x01}, {0x00, 0x00, 0x60, 0x00, 0x00, 0x02}}; ++ ++static int rdc_open(struct net_device *dev); ++static int rdc_start_xmit(struct sk_buff *skb, struct net_device *dev); ++static irqreturn_t rdc_interrupt(int irq, void *dev_id, struct pt_regs *regs); ++static struct net_device_stats *rdc_get_stats(struct net_device *dev); ++static int rdc_close(struct net_device *dev); ++static void set_multicast_list(struct net_device *dev); ++static struct ethtool_ops netdev_ethtool_ops; ++static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); ++static void rdc_down(struct net_device *dev); ++static void rdc_up(struct net_device *dev); ++static void rdc_tx_timeout (struct net_device *dev); ++static void rdc_timer(unsigned long); ++ ++static int phy_mode_chk(struct net_device *dev); ++static int phy_read(int ioaddr, int phy_adr, int reg_idx); ++static void phy_write(int ioaddr, int phy_adr, int reg_idx, int dat); ++ ++#ifdef BOOSTRDC ++#define rx_buf_alloc(lp) \ ++ do { \ ++ struct rdc_descriptor *descptr; \ ++ descptr = lp->rx_insert_ptr; \ ++ while(lp->rx_free_desc < RX_DCNT){ \ ++ descptr->skb_ptr = dev_alloc_skb(MAX_BUF_SIZE); \ ++ if (!descptr->skb_ptr) break; \ ++ descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, descptr->skb_ptr->tail, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE)); \ ++ descptr->status = 0x8000; \ ++ descptr = descptr->vndescp; \ ++ lp->rx_free_desc++; \ ++ } \ ++ lp->rx_insert_ptr = descptr; \ ++ } while(0) ++ ++#else ++static void rx_buf_alloc(struct rdc_private *lp); ++#endif ++ ++#ifdef FORICPLUS ++static void process_ioctl(struct net_device*, unsigned long* ); ++#endif ++ ++static int __devinit rdc_init_one (struct pci_dev *pdev, ++ const struct pci_device_id *ent) ++{ ++ struct net_device *dev; ++ struct rdc_private *lp; ++ int ioaddr, io_size, err; ++ static int card_idx = -1; ++ int chip_id = (int)ent->driver_data; ++ ++ RDC_DBUG("rdc_init_one()", 0); ++ ++ if (printed_version++) ++ printk(version); ++ ++ if ((err = pci_enable_device (pdev))) ++ return err; ++ ++ /* this should always be supported */ ++ if (pci_set_dma_mask(pdev, 0xffffffff)) { ++ printk(KERN_ERR DRV_NAME "32-bit PCI DMA addresses not supported by the card!?\n"); ++ return -ENODEV; ++ } ++ ++ /* IO Size check */ ++ io_size = rdc_chip_info[chip_id].io_size; ++ if (pci_resource_len (pdev, 0) < io_size) { ++ return -ENODEV; ++ } ++ ++ ioaddr = pci_resource_start (pdev, 0); /* IO map base address */ ++ pci_set_master(pdev); ++ ++ dev = alloc_etherdev(sizeof(struct rdc_private)); ++ if (dev == NULL) ++ return -ENOMEM; ++ SET_MODULE_OWNER(dev); ++ ++ if (pci_request_regions(pdev, DRV_NAME)) { ++ printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n"); ++ err = -ENODEV; ++ goto err_out_disable; ++ } ++ ++ /* Init system & device */ ++ lp = dev->priv; ++ dev->base_addr = ioaddr; ++ dev->irq = pdev->irq; ++ ++ spin_lock_init(&lp->lock); ++ pci_set_drvdata(pdev, dev); ++ ++ /* Set MAC address */ ++ card_idx++; ++ memcpy(dev->dev_addr, (u8 *)&adr_table[card_idx][0], 6); ++ ++ /* Link new device into rdc_root_dev */ ++ lp->pdev = pdev; ++ ++ /* Init RDC private data */ ++ lp->mcr0 = 0x1002; ++ lp->phy_addr = phy_table[card_idx]; ++ ++ /* The RDC-specific entries in the device structure. */ ++ dev->open = &rdc_open; ++ dev->hard_start_xmit = &rdc_start_xmit; ++ dev->stop = &rdc_close; ++ dev->get_stats = &rdc_get_stats; ++ dev->set_multicast_list = &set_multicast_list; ++ dev->do_ioctl = &netdev_ioctl; ++ dev->ethtool_ops = &netdev_ethtool_ops; ++ dev->tx_timeout = &rdc_tx_timeout; ++ dev->watchdog_timeo = TX_TIMEOUT; ++ ++ /* Register net device. After this dev->name assign */ ++ if ((err = register_netdev(dev))) { ++ printk(KERN_ERR DRV_NAME ": Failed to register net device\n"); ++ goto err_out_res; ++ } ++ ++ netif_carrier_on(dev); ++ return 0; ++ ++err_out_res: ++ pci_release_regions(pdev); ++err_out_disable: ++ pci_disable_device(pdev); ++ pci_set_drvdata(pdev, NULL); ++ kfree(dev); ++ ++ return err; ++} ++ ++static void __devexit rdc_remove_one (struct pci_dev *pdev) ++{ ++ struct net_device *dev = pci_get_drvdata(pdev); ++ ++ unregister_netdev(dev); ++ pci_release_regions(pdev); ++ kfree(dev); ++ pci_disable_device(pdev); ++ pci_set_drvdata(pdev, NULL); ++} ++ ++static int ++rdc_open(struct net_device *dev) ++{ ++ struct rdc_private *lp = dev->priv; ++ int i; ++ ++ RDC_DBUG("rdc_open()", 0); ++ ++ /* Request IRQ and Register interrupt handler */ ++ i = request_irq(dev->irq, &rdc_interrupt, SA_SHIRQ, dev->name, dev); ++ if (i) return i; ++ ++ /* Allocate Descriptor memory */ ++ lp->desc_pool = pci_alloc_consistent(lp->pdev, ALLOC_DESC_SIZE, &lp->desc_dma); ++ if (!lp->desc_pool) return -ENOMEM; ++ ++ rdc_up(dev); ++ ++ netif_start_queue(dev); ++ ++#ifndef FORICPLUS ++ /* set and active a timer process */ ++ init_timer(&lp->timer); ++ lp->timer.expires = TIMER_WUT; ++ lp->timer.data = (unsigned long)dev; ++ lp->timer.function = &rdc_timer; ++ add_timer(&lp->timer); ++#endif ++ ++ return 0; ++} ++ ++static void ++rdc_tx_timeout (struct net_device *dev) ++{ ++ struct rdc_private *lp = dev->priv; ++ //int ioaddr = dev->base_addr; ++ //struct rdc_descriptor *descptr = lp->tx_remove_ptr; ++ ++ RDC_DBUG("rdc_tx_timeout()", 0); ++ ++ /* Transmitter timeout, serious problems. */ ++ /* Sten: Nothing need to do so far. */ ++ printk(KERN_ERR DRV_NAME ": Big Trobule, transmit timeout/n"); ++ lp->stats.tx_errors++; ++ netif_stop_queue(dev); ++ ++//printk(" XMT timedout: CR0 %x, CR40 %x, CR3C %x, CR2C %x, CR30 %x, CR34 %x, CR38 %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c), inw(ioaddr+0x2c), inw(ioaddr+0x30), inw(ioaddr+0x34), inw(ioaddr+0x38)); ++ ++//printk(" XMT_TO: %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp); ++} ++ ++ ++static int ++rdc_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct rdc_private *lp = dev->priv; ++ struct rdc_descriptor *descptr; ++ int ioaddr = dev->base_addr; ++ unsigned long flags; ++ ++ RDC_DBUG("rdc_start_xmit()", 0); ++ ++ if (skb == NULL) /* NULL skb directly return */ ++ return 0; ++ if (skb->len >= MAX_BUF_SIZE) { /* Packet too long, drop it */ ++ dev_kfree_skb(skb); ++ return 0; ++ } ++ ++ /* Critical Section */ ++ spin_lock_irqsave(&lp->lock, flags); ++ ++ /* TX resource check */ ++ if (!lp->tx_free_desc) { ++ spin_unlock_irqrestore(&lp->lock, flags); ++ printk(KERN_ERR DRV_NAME ": NO TX DESC "); ++ return 1; ++ } ++ ++ /* Statistic Counter */ ++ lp->stats.tx_packets++; ++ lp->stats.tx_bytes += skb->len; ++ ++ /* Set TX descriptor & Transmit it */ ++ lp->tx_free_desc--; ++ descptr = lp->tx_insert_ptr; ++ if (skb->len < 0x3c) descptr->len = 0x3c; ++ else descptr->len = skb->len; ++ descptr->skb_ptr = skb; ++ descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); ++ descptr->status = 0x8000; ++ outw(0x01, ioaddr + 0x14); ++ lp->tx_insert_ptr = descptr->vndescp; ++ ++#if RDC_DEBUG ++ printk("Xmit(): %08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp); ++#endif ++ ++ /* If no tx resource, stop */ ++ if (!lp->tx_free_desc) ++ netif_stop_queue(dev); ++ ++ dev->trans_start = jiffies; ++ spin_unlock_irqrestore(&lp->lock, flags); ++ return 0; ++} ++ ++/* The RDC interrupt handler. */ ++static irqreturn_t ++rdc_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct net_device *dev = dev_id; ++ struct rdc_private *lp; ++ struct rdc_descriptor *descptr; ++ struct sk_buff *skb_ptr; ++ int ioaddr, status; ++ unsigned long flags; ++ int handled = 0; ++ ++ RDC_DBUG("rdc_interrupt()", 0); ++ if (dev == NULL) { ++ printk (KERN_ERR DRV_NAME ": INT() unknown device.\n"); ++ return IRQ_RETVAL(handled); ++ } ++ ++ lp = (struct rdc_private *)dev->priv; ++ spin_lock_irqsave(&lp->lock, flags); ++ ++ /* Check MAC Interrupt status */ ++ ioaddr = dev->base_addr; ++ outw(0x0, ioaddr + 0x40); /* Mask Off RDC MAC interrupt */ ++ status = inw(ioaddr + 0x3c); /* Read INTR status and clear */ ++ ++ /* TX interrupt request */ ++ if (status & 0x10) { ++ handled = 1; ++ descptr = lp->tx_remove_ptr; ++ while(lp->tx_free_desc < TX_DCNT) { ++ if (descptr->status & 0x8000) break; /* Not complte */ ++ skb_ptr = descptr->skb_ptr; ++ pci_unmap_single(lp->pdev, descptr->buf, skb_ptr->len, PCI_DMA_TODEVICE); ++ dev_kfree_skb_irq(skb_ptr); /* Free buffer */ ++ descptr->skb_ptr = 0; ++ descptr = descptr->vndescp; /* To next descriptor */ ++ lp->tx_free_desc++; ++ } ++ lp->tx_remove_ptr = descptr; ++ if (lp->tx_free_desc) netif_wake_queue(dev); ++ } ++ ++ /* RX interrupt request */ ++ if (status & 0x01) { ++ handled = 1; ++ descptr = lp->rx_remove_ptr; ++ while(lp->rx_free_desc) { ++ if (descptr->status & 0x8000) break; /* No Rx packet */ ++ skb_ptr = descptr->skb_ptr; ++ descptr->skb_ptr = 0; ++ skb_ptr->dev = dev; ++ skb_put(skb_ptr, descptr->len - 4); ++ pci_unmap_single(lp->pdev, descptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE); ++ skb_ptr->protocol = eth_type_trans(skb_ptr, dev); ++ netif_rx(skb_ptr); /* Send to upper layer */ ++ lp->stats.rx_packets++; ++ lp->stats.rx_bytes += descptr->len; ++ descptr = descptr->vndescp; /* To next descriptor */ ++ lp->rx_free_desc--; ++ } ++ lp->rx_remove_ptr = descptr; ++ } ++ ++ /* Allocate new RX buffer */ ++ if (lp->rx_free_desc < RX_DCNT) rx_buf_alloc(lp); ++ ++ outw(0x0011, ioaddr + 0x40); /* TX/RX interrupt enable */ ++ spin_unlock_irqrestore(&lp->lock, flags); ++ ++ return IRQ_RETVAL(handled); ++} ++ ++ ++static struct net_device_stats * ++rdc_get_stats(struct net_device *dev) ++{ ++ struct rdc_private *lp = dev->priv; ++ ++ RDC_DBUG("rdc_get_stats()", 0); ++ return &lp->stats; ++} ++ ++/* ++ * Set or clear the multicast filter for this adaptor. ++ */ ++static void ++set_multicast_list(struct net_device *dev) ++{ ++ struct rdc_private *lp = dev->priv; ++ struct dev_mc_list *mcptr; ++ int ioaddr = dev->base_addr; ++ u16 *adrp, i; ++ unsigned long flags; ++ ++ RDC_DBUG("set_multicast_list()", 0); ++ ++ /* MAC Address */ ++ ioaddr += 0x68; ++ adrp = (u16 *) dev->dev_addr; ++ outw(adrp[0], ioaddr); ioaddr += 2; ++ outw(adrp[1], ioaddr); ioaddr += 2; ++ outw(adrp[2], ioaddr); ioaddr += 2; ++ ++#if RDC_DEBUG ++ printk("MAC ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]); ++#endif ++ ++ /* Promiscous Mode */ ++ spin_lock_irqsave(lp->lock, flags); ++ i = inw(ioaddr) & ~0x0120; /* Clear AMCP & PROM */ ++ if (dev->flags & IFF_PROMISC) i |= 0x0020; ++ if (dev->mc_count > 4) i |= 0x0100; /* Too many multicast address */ ++ outw(i, ioaddr); ++ spin_unlock_irqrestore(lp->lock, flags); ++ ++ /* Multicast Address */ ++ if (dev->mc_count > 4) /* Wait to do: Hash Table for multicast */ ++ return; ++ ++ /* Multicast Address 1~4 case */ ++ for (i = 0, mcptr = dev->mc_list; (imc_count) && (i<4); i++) { ++ adrp = (u16 *)mcptr->dmi_addr; ++ outw(adrp[0], ioaddr); ioaddr += 2; ++ outw(adrp[1], ioaddr); ioaddr += 2; ++ outw(adrp[2], ioaddr); ioaddr += 2; ++ mcptr = mcptr->next; ++#if RDC_DEBUG ++ printk("M_ADDR: %04x %04x %04x\n", adrp[0], adrp[1], adrp[2]); ++#endif ++ } ++ for (i = dev->mc_count; i < 4; i++) { ++ outw(0xffff, ioaddr); ioaddr += 2; ++ outw(0xffff, ioaddr); ioaddr += 2; ++ outw(0xffff, ioaddr); ioaddr += 2; ++ } ++} ++ ++static void netdev_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) ++{ ++ struct rdc_private *rp = dev->priv; ++ ++ strcpy (info->driver, DRV_NAME); ++ strcpy (info->version, DRV_VERSION); ++ strcpy (info->bus_info, pci_name(rp->pdev)); ++} ++ ++static struct ethtool_ops netdev_ethtool_ops = { ++ .get_drvinfo = netdev_get_drvinfo, ++}; ++ ++static int ++rdc_close(struct net_device *dev) ++{ ++ struct rdc_private *lp = dev->priv; ++ ++ RDC_DBUG("rdc_close()", 0); ++ ++ /* deleted timer */ ++ del_timer_sync(&lp->timer); ++ ++ spin_lock_irq(&lp->lock); ++ ++ netif_stop_queue(dev); ++ ++ rdc_down(dev); ++ ++ spin_unlock_irq(&lp->lock); ++ ++ return 0; ++} ++ ++/** ++ */ ++static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) ++{ ++ RDC_DBUG("netdev_ioctl()", 0); ++ ++#ifdef FORICPLUS ++ switch(cmd) ++ { ++ case SIOCDEVPRIVATE: ++ ++ //printk(KERN_INFO"Ethernet IOCTL: cmd SIOCDEVPRIVATE\n"); ++ { ++ unsigned long *data; ++ unsigned long args[4]; ++ ++ data = (unsigned long *)rq->ifr_data; ++ if (copy_from_user(args, data, 4*sizeof(unsigned long))) ++ return -EFAULT; ++ ++ process_ioctl(dev, args); ++ } ++ break; ++ ++ default: ++ break; ++ } ++#endif ++ return 0; ++} ++ ++/** ++ Stop RDC MAC and Free the allocated resource ++ */ ++static void rdc_down(struct net_device *dev) ++{ ++ struct rdc_private *lp = dev->priv; ++ int i; ++ int ioaddr = dev->base_addr; ++ ++ RDC_DBUG("rdc_down()", 0); ++ ++ /* Stop MAC */ ++ outw(0x0000, ioaddr + 0x40); /* Mask Off Interrupt */ ++ outw(0x0001, ioaddr + 0x04); /* Reset RDC MAC */ ++ i = 0; ++ do{}while((i++ < 2048) && (inw(ioaddr + 0x04) & 0x1)); ++ ++ free_irq(dev->irq, dev); ++ ++ /* Free RX buffer */ ++ for (i = 0; i < RX_DCNT; i++) { ++ if (lp->rx_insert_ptr->skb_ptr) { ++ pci_unmap_single(lp->pdev, lp->rx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE); ++ dev_kfree_skb(lp->rx_insert_ptr->skb_ptr); ++ lp->rx_insert_ptr->skb_ptr = 0; ++ } ++ lp->rx_insert_ptr = lp->rx_insert_ptr->vndescp; ++ } ++ ++ /* Free TX buffer */ ++ for (i = 0; i < TX_DCNT; i++) { ++ if (lp->tx_insert_ptr->skb_ptr) { ++ pci_unmap_single(lp->pdev, lp->tx_insert_ptr->buf, MAX_BUF_SIZE, PCI_DMA_TODEVICE); ++ dev_kfree_skb(lp->tx_insert_ptr->skb_ptr); ++ lp->rx_insert_ptr->skb_ptr = 0; ++ } ++ lp->tx_insert_ptr = lp->tx_insert_ptr->vndescp; ++ } ++ ++ /* Free Descriptor memory */ ++ pci_free_consistent(lp->pdev, ALLOC_DESC_SIZE, lp->desc_pool, lp->desc_dma); ++} ++ ++/* Init RDC MAC */ ++static void rdc_up(struct net_device *dev) ++{ ++ struct rdc_private *lp = dev->priv; ++ struct rdc_descriptor *descptr; ++ int i; ++ int ioaddr = dev->base_addr; ++ u32 tmp_addr; ++ dma_addr_t desc_dma, start_dma; ++ ++ RDC_DBUG("rdc_up()", 0); ++ ++ /* Initilize */ ++ lp->tx_free_desc = TX_DCNT; ++ lp->rx_free_desc = 0; ++ ++ /* Init descriptor */ ++ memset(lp->desc_pool, 0, ALLOC_DESC_SIZE); /* Let all descriptor = 0 */ ++ lp->tx_insert_ptr = (struct rdc_descriptor *)lp->desc_pool; ++ lp->tx_remove_ptr = lp->tx_insert_ptr; ++ lp->rx_insert_ptr = (struct rdc_descriptor *)lp->tx_insert_ptr+TX_DCNT; ++ lp->rx_remove_ptr = lp->rx_insert_ptr; ++ ++ /* Init TX descriptor */ ++ descptr = lp->tx_insert_ptr; ++ desc_dma = lp->desc_dma; ++ start_dma = desc_dma; ++ for (i = 0; i < TX_DCNT; i++) { ++ descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct rdc_descriptor)); ++ descptr->vndescp = (descptr + 1); ++ descptr = (descptr + 1); ++ desc_dma += sizeof(struct rdc_descriptor); ++ } ++ (descptr - 1)->ndesc = cpu_to_le32(start_dma); ++ (descptr - 1)->vndescp = lp->tx_insert_ptr; ++ ++ /* Init RX descriptor */ ++ start_dma = desc_dma; ++ descptr = lp->rx_insert_ptr; ++ for (i = 0; i < RX_DCNT; i++) { ++ descptr->ndesc = cpu_to_le32(desc_dma + sizeof(struct rdc_descriptor)); ++ descptr->vndescp = (descptr + 1); ++ descptr = (descptr + 1); ++ desc_dma += sizeof(struct rdc_descriptor); ++ } ++ (descptr - 1)->ndesc = cpu_to_le32(start_dma); ++ (descptr - 1)->vndescp = lp->rx_insert_ptr; ++ ++ /* Allocate buffer for RX descriptor */ ++ rx_buf_alloc(lp); ++ ++#if RDC_DEBUG ++descptr = lp->tx_insert_ptr; ++for (i = 0; i < TX_DCNT; i++) { ++ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp); ++ descptr = descptr->vndescp; ++} ++descptr = lp->rx_insert_ptr; ++for (i = 0; i < RX_DCNT; i++) { ++ printk("%08lx:%04x %04x %08lx %08lx %08lx %08lx\n", descptr, descptr->status, descptr->len, descptr->buf, descptr->skb_ptr, descptr->ndesc, descptr->vndescp); ++ descptr = descptr->vndescp; ++} ++#endif ++ ++ /* MAC operation register */ ++ outw(0x01, ioaddr); /* Reset MAC */ ++ outw(2 , ioaddr+0xAC); ++ outw(0 , ioaddr+0xAC); ++ udelay(5000); ++ ++ /* TX and RX descriptor start Register */ ++ tmp_addr = cpu_to_le32(lp->tx_insert_ptr); ++ //timc ++ tmp_addr = virt_to_bus((volatile void *)tmp_addr); ++ outw((u16) tmp_addr, ioaddr+0x2c); ++ outw(tmp_addr >> 16, ioaddr+0x30); ++ tmp_addr = cpu_to_le32(lp->rx_insert_ptr); ++ //timc ++ tmp_addr = virt_to_bus((volatile void *)tmp_addr); ++ outw((u16) tmp_addr, ioaddr+0x34); ++ outw(tmp_addr >> 16, ioaddr+0x38); ++ ++ /* Buffer Size Register */ ++ outw(MAX_BUF_SIZE, ioaddr+0x18); ++ ++#ifdef FORICPLUS ++ ++ if(phy_read(ioaddr, 0, 2) == 0x0243) // ICPlus IP175C Signature ++ { ++ phy_write(ioaddr, 29,31, 0x175C); //Enable registers ++ } ++ lp->phy_mode = 0x8000; ++ ++#else ++ /* PHY Mode Check */ ++ phy_write(ioaddr, lp->phy_addr, 4, PHY_CAP); ++ phy_write(ioaddr, lp->phy_addr, 0, PHY_MODE); ++ ++ if (PHY_MODE == 0x3100) ++ lp->phy_mode = phy_mode_chk(dev); ++ else lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0; ++#endif ++ /* MAC Bus Control Register */ ++ outw(MBCR_DEFAULT, ioaddr+0x8); ++ ++ /* MAC TX/RX Enable */ ++ lp->mcr0 |= lp->phy_mode; ++ ++ // Dante ++ // BIT15 | BIT12 | BIT5 | BIT1 ++ lp->mcr0 |= 0x0020; ++ //Xavier, only set promiscuous mode with eth1 (LAN i/f) ++ //This is a very bad hard code... ++ //if(ioaddr == 0xe900)lp->mcr0 |= 0x0020; ++ ++ outw(lp->mcr0, ioaddr); ++ ++#ifdef BOOSTRDC ++ /* set interrupt waiting time and packet numbers */ ++ outw(0x0802, ioaddr + 0x0C); ++ outw(0x0802, ioaddr + 0x10); ++ ++#ifdef FORICPLUS ++ /* upgrade performance (by RDC guys) */ ++ phy_write(ioaddr,30,17,(phy_read(ioaddr,30,17)|0x4000)); //bit 14=1 ++ phy_write(ioaddr,30,17,~((~phy_read(ioaddr,30,17))|0x2000)); //bit 13=0 ++ phy_write(ioaddr,0,19,0x0000); ++ phy_write(ioaddr,0,30,0x01F0); ++#endif ++#endif ++ ++ /* Interrupt Mask Register */ ++ outw(0x0011, ioaddr + 0x40); ++} ++ ++/* ++ A periodic timer routine ++ Polling PHY Chip Link Status ++*/ ++static void rdc_timer(unsigned long data) ++{ ++ struct net_device *dev=(struct net_device *)data; ++ struct rdc_private *lp = dev->priv; ++ u16 ioaddr = dev->base_addr, phy_mode; ++ ++ RDC_DBUG("rdc_timer()", 0); ++ ++ /* Polling PHY Chip Status */ ++ if (PHY_MODE == 0x3100) ++ phy_mode = phy_mode_chk(dev); ++ else phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0; ++ ++ if (phy_mode != lp->phy_mode) { ++ lp->phy_mode = phy_mode; ++ lp->mcr0 = (lp->mcr0 & 0x7fff) | phy_mode; ++ outw(lp->mcr0, ioaddr); ++ printk(" Link Change %x \n", inw(ioaddr)); ++ } ++ ++ /* Debug */ ++// printk(" Timer: CR0 %x CR40 %x CR3C %x\n", inw(ioaddr), inw(ioaddr+0x40), inw(ioaddr+0x3c)); ++ ++ /* Timer active again */ ++ lp->timer.expires = TIMER_WUT; ++ add_timer(&lp->timer); ++} ++ ++#ifndef BOOSTRDC ++/* Allocate skb buffer for rx descriptor */ ++static void rx_buf_alloc(struct rdc_private *lp) ++{ ++ struct rdc_descriptor *descptr; ++ ++ RDC_DBUG("rx_buf_alloc()", 0); ++ descptr = lp->rx_insert_ptr; ++ while(lp->rx_free_desc < RX_DCNT){ ++ descptr->skb_ptr = dev_alloc_skb(MAX_BUF_SIZE); ++ if (!descptr->skb_ptr) break; ++ descptr->buf = cpu_to_le32(pci_map_single(lp->pdev, descptr->skb_ptr->tail, MAX_BUF_SIZE, PCI_DMA_FROMDEVICE)); ++ descptr->status = 0x8000; ++ descptr = descptr->vndescp; ++ lp->rx_free_desc++; ++ } ++ lp->rx_insert_ptr = descptr; ++} ++#endif ++ ++/* Status of PHY CHIP */ ++static int phy_mode_chk(struct net_device *dev) ++{ ++ ++ struct rdc_private *lp = dev->priv; ++ int ioaddr = dev->base_addr, phy_dat; ++ ++ RDC_DBUG("phy_mode_chk()", 0); ++ ++ /* PHY Link Status Check */ ++ phy_dat = phy_read(ioaddr, lp->phy_addr, 1); ++ if (!(phy_dat & 0x4)) return 0x8000; /* Link Failed, full duplex */ ++ ++ /* PHY Chip Auto-Negotiation Status */ ++ phy_dat = phy_read(ioaddr, lp->phy_addr, 1); ++ if (phy_dat & 0x0020) { ++ /* Auto Negotiation Mode */ ++ phy_dat = phy_read(ioaddr, lp->phy_addr, 5); ++ phy_dat &= phy_read(ioaddr, lp->phy_addr, 4); ++ if (phy_dat & 0x140) phy_dat = 0x8000; ++ else phy_dat = 0; ++ } else { ++ /* Force Mode */ ++ phy_dat = phy_read(ioaddr, lp->phy_addr, 0); ++ if (phy_dat & 0x100) phy_dat = 0x8000; ++ else phy_dat = 0x0000; ++ } ++ ++ return phy_dat; ++ ++}; ++ ++/* Read a word data from PHY Chip */ ++static int phy_read(int ioaddr, int phy_addr, int reg_idx) ++{ ++ int i = 0; ++ ++ RDC_DBUG("phy_read()", 0); ++ outw(0x2000 + reg_idx + (phy_addr << 8), ioaddr + 0x20); ++ do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x2000) ); ++ ++ return inw(ioaddr + 0x24); ++} ++ ++/* Write a word data from PHY Chip */ ++static void phy_write(int ioaddr, int phy_addr, int reg_idx, int dat) ++{ ++ int i = 0; ++ ++ RDC_DBUG("phy_write()", 0); ++ outw(dat, ioaddr + 0x28); ++ outw(0x4000 + reg_idx + (phy_addr << 8), ioaddr + 0x20); ++ do{}while( (i++ < 2048) && (inw(ioaddr + 0x20) & 0x4000) ); ++} ++ ++enum { ++ RDC_6040 = 0 ++}; ++ ++static struct pci_device_id rdc_pci_tbl[] = { ++ {0x17F3, 0x6040, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040}, ++ //{0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RDC_6040}, ++ {0,} /* terminate list */ ++}; ++MODULE_DEVICE_TABLE(pci, rdc_pci_tbl); ++ ++static struct pci_driver rdc_driver = { ++ .name = "r6040", ++ .id_table = rdc_pci_tbl, ++ .probe = rdc_init_one, ++ .remove = __devexit_p(rdc_remove_one), ++}; ++ ++ ++static int __init rdc_init (void) ++{ ++ RDC_DBUG("rdc_init()", 0); ++ ++ printk(version); ++ printed_version = 1; ++ ++ return pci_module_init (&rdc_driver); ++} ++ ++ ++static void __exit rdc_cleanup (void) ++{ ++ RDC_DBUG("rdc_cleanup()", 0); ++ pci_unregister_driver (&rdc_driver); ++} ++ ++module_init(rdc_init); ++module_exit(rdc_cleanup); ++ ++ ++/* ++ * Local variables: ++ * compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c rdc.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`" ++ * c-indent-level: 4 ++ * c-basic-offset: 4 ++ * tab-width: 4 ++ * End: ++ */ ++ ++#ifdef FORICPLUS ++#define DMZ_GPIO 1 ++#define RDC3210_CFGREG_ADDR 0x0CF8 ++#define RDC3210_CFGREG_DATA 0x0CFC ++static void process_ioctl(struct net_device *dev, unsigned long* args) ++{ ++ int ioaddr = dev->base_addr; ++ ++ /* port priority */ ++ if(args[0]&(1<<31))phy_write(ioaddr,29,19,(phy_read(ioaddr,29,19)|0x2000)); /* port 0 */ ++ if(args[0]&(1<<29))phy_write(ioaddr,29,19,(phy_read(ioaddr,29,19)|0x0020)); /* port 1 */ ++ if(args[0]&(1<<27))phy_write(ioaddr,29,20,(phy_read(ioaddr,29,20)|0x2000)); /* port 2 */ ++ if(args[0]&(1<<25))phy_write(ioaddr,29,20,(phy_read(ioaddr,29,20)|0x0020)); /* port 3 */ ++ ++ /* DMZ LED */ ++ ++ { ++ unsigned int val; ++ ++ val = 0x80000000 | (7 << 11) | ((0x48)); ++ outl(val, RDC3210_CFGREG_ADDR); ++ udelay(10); ++ val = inl(RDC3210_CFGREG_DATA); ++ ++ val |= (0x1 << DMZ_GPIO); ++ outl(val, RDC3210_CFGREG_DATA); ++ udelay(10); ++ ++ val = 0x80000000 | (7 << 11) | ((0x4C)); ++ outl(val, RDC3210_CFGREG_ADDR); ++ udelay(10); ++ val = inl(RDC3210_CFGREG_DATA); ++ if(args[0]&(1<<23)) /* DMZ enabled */ ++ val &= ~(0x1 << DMZ_GPIO); /* low activated */ ++ else val |= (0x1 << DMZ_GPIO); ++ outl(val, RDC3210_CFGREG_DATA); ++ udelay(10); ++ } ++ ++ ++} ++#endif /* FORICPLUS */ -- 2.30.2