From 43c15d3dd570be97d44944cade99ab03e6d5491e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 14 Oct 2009 00:25:33 +0200 Subject: [PATCH] PXA: PXAMMC: Add Monahans support This patch enables PXAMCI support on PXA3xx CPUs. This patch only enables MMC1 though, MMC2 and PXA31x MMC3 will need further patch to be operational. Signed-off-by: Marek Vasut --- drivers/mmc/pxa_mmc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/pxa_mmc.c b/drivers/mmc/pxa_mmc.c index b1555414df..87769033bb 100644 --- a/drivers/mmc/pxa_mmc.c +++ b/drivers/mmc/pxa_mmc.c @@ -126,7 +126,7 @@ mmc_block_read(uchar * dst, ulong src, ulong len) MMC_I_MASK = ~MMC_I_MASK_RXFIFO_RD_REQ; while (len) { if (MMC_I_REG & MMC_I_REG_RXFIFO_RD_REQ) { -#ifdef CONFIG_PXA27X +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) int i; for (i = min(len, 32); i; i--) { *dst++ = *((volatile uchar *)&MMC_RXFIFO); @@ -558,8 +558,11 @@ mmc_legacy_init(int verbose) set_GPIO_mode(GPIO6_MMCCLK_MD); set_GPIO_mode(GPIO8_MMCCS0_MD); #endif +#ifdef CONFIG_CPU_MONAHANS /* pxa3xx */ + CKENA |= CKENA_12_MMC0 | CKENA_13_MMC1; +#else /* pxa2xx */ CKEN |= CKEN12_MMC; /* enable MMC unit clock */ - +#endif MMC_CLKRT = MMC_CLKRT_0_3125MHZ; MMC_RESTO = MMC_RES_TO_MAX; MMC_SPI = MMC_SPI_DISABLE; @@ -624,7 +627,7 @@ mmc_legacy_init(int verbose) MMC_CLKRT = 0; /* 20 MHz */ resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1); -#ifdef CONFIG_PXA27X +#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) if (IF_TYPE_SD == mmc_dev.if_type) { resp = mmc_cmd(MMC_CMD_APP_CMD, rca, 0, MMC_CMDAT_R1); resp = mmc_cmd(SD_CMD_APP_SET_BUS_WIDTH, 0, 2, MMC_CMDAT_R1); -- 2.30.2