From 42c0526c930523425ff6edc95b7235ce7ab9308d Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 26 Sep 2012 10:34:00 -0700 Subject: [PATCH] drm/i915: Extract PCU communication There is a special mechanism for communicating with the PCU already being used for the ring frequency stuff. As we'll be needing this for other commands, extract it now to make future code less error prone and the current code more reusable. I'm not entirely sure if this code matches 1:1 with the previous code behaviorally. Functionally however, it should be the same. CC: Jesse Barnes Signed-off-by: Ben Widawsky Reviewed-by: Jesse Barnes [danvet: Fixup compile fail reported by Wu Fengguang.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_debugfs.c | 13 ++-- drivers/gpu/drm/i915/i915_drv.h | 3 + drivers/gpu/drm/i915/intel_pm.c | 96 ++++++++++++++++++----------- 3 files changed, 68 insertions(+), 44 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 7a4b3f3aad3f..66475855c0ec 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1283,15 +1283,10 @@ static int i915_ring_freq_table(struct seq_file *m, void *unused) for (gpu_freq = dev_priv->rps.min_delay; gpu_freq <= dev_priv->rps.max_delay; gpu_freq++) { - I915_WRITE(GEN6_PCODE_DATA, gpu_freq); - I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | - GEN6_PCODE_READ_MIN_FREQ_TABLE); - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & - GEN6_PCODE_READY) == 0, 10)) { - DRM_ERROR("pcode read of freq table timed out\n"); - continue; - } - ia_freq = I915_READ(GEN6_PCODE_DATA); + ia_freq = gpu_freq; + sandybridge_pcode_read(dev_priv, + GEN6_PCODE_READ_MIN_FREQ_TABLE, + &ia_freq); seq_printf(m, "%d\t\t%d\n", gpu_freq * GT_FREQUENCY_MULTIPLIER, ia_freq * 100); } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9e446b621642..32814340f763 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1630,6 +1630,9 @@ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv); void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv); int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv); +int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u8 mbox, u32 *val); +int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val); + #define __i915_read(x, y) \ u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg); diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 07da990eb77d..0cc7dbf55bee 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2407,7 +2407,7 @@ static void gen6_enable_rps(struct drm_device *dev) u32 pcu_mbox, rc6_mask = 0; u32 gtfifodbg; int rc6_mode; - int i; + int i, ret; WARN_ON(!mutex_is_locked(&dev->struct_mutex)); @@ -2503,30 +2503,16 @@ static void gen6_enable_rps(struct drm_device *dev) GEN6_RP_UP_BUSY_AVG | (IS_HASWELL(dev) ? GEN7_RP_DOWN_IDLE_AVG : GEN6_RP_DOWN_IDLE_CONT)); - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, - 500)) - DRM_ERROR("timeout waiting for pcode mailbox to become idle\n"); - - I915_WRITE(GEN6_PCODE_DATA, 0); - I915_WRITE(GEN6_PCODE_MAILBOX, - GEN6_PCODE_READY | - GEN6_PCODE_WRITE_MIN_FREQ_TABLE); - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, - 500)) - DRM_ERROR("timeout waiting for pcode mailbox to finish\n"); - - /* Check for overclock support */ - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, - 500)) - DRM_ERROR("timeout waiting for pcode mailbox to become idle\n"); - I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS); - pcu_mbox = I915_READ(GEN6_PCODE_DATA); - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, - 500)) - DRM_ERROR("timeout waiting for pcode mailbox to finish\n"); - if (pcu_mbox & (1<<31)) { /* OC supported */ - dev_priv->rps.max_delay = pcu_mbox & 0xff; - DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50); + ret = sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_MIN_FREQ_TABLE, 0); + if (!ret) { + pcu_mbox = 0; + ret = sandybridge_pcode_read(dev_priv, GEN6_READ_OC_PARAMS, &pcu_mbox); + if (ret && pcu_mbox & (1<<31)) { /* OC supported */ + dev_priv->rps.max_delay = pcu_mbox & 0xff; + DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50); + } + } else { + DRM_DEBUG_DRIVER("Failed to set the min frequency\n"); } gen6_set_rps(dev_priv->dev, (gt_perf_status & 0xff00) >> 8); @@ -2581,17 +2567,11 @@ static void gen6_update_ring_freq(struct drm_device *dev) else ia_freq = max_ia_freq - ((diff * scaling_factor) / 2); ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100); + ia_freq <<= GEN6_PCODE_FREQ_IA_RATIO_SHIFT; - I915_WRITE(GEN6_PCODE_DATA, - (ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) | - gpu_freq); - I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | - GEN6_PCODE_WRITE_MIN_FREQ_TABLE); - if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & - GEN6_PCODE_READY) == 0, 10)) { - DRM_ERROR("pcode write of freq table timed out\n"); - continue; - } + sandybridge_pcode_write(dev_priv, + GEN6_PCODE_WRITE_MIN_FREQ_TABLE, + ia_freq | gpu_freq); } } @@ -4152,3 +4132,49 @@ void intel_gt_init(struct drm_device *dev) } } +int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u8 mbox, u32 *val) +{ + WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); + + if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) { + DRM_DEBUG_DRIVER("warning: pcode (read) mailbox access failed\n"); + return -EAGAIN; + } + + I915_WRITE(GEN6_PCODE_DATA, *val); + I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox); + + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, + 500)) { + DRM_ERROR("timeout waiting for pcode read (%d) to finish\n", mbox); + return -ETIMEDOUT; + } + + *val = I915_READ(GEN6_PCODE_DATA); + I915_WRITE(GEN6_PCODE_DATA, 0); + + return 0; +} + +int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u8 mbox, u32 val) +{ + WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); + + if (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) { + DRM_DEBUG_DRIVER("warning: pcode (write) mailbox access failed\n"); + return -EAGAIN; + } + + I915_WRITE(GEN6_PCODE_DATA, val); + I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox); + + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, + 500)) { + DRM_ERROR("timeout waiting for pcode write (%d) to finish\n", mbox); + return -ETIMEDOUT; + } + + I915_WRITE(GEN6_PCODE_DATA, 0); + + return 0; +} -- 2.30.2