From 428c6440ef933a3d9df5adfeb2cbb3ea7ebb6a68 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 25 Jan 2008 22:17:18 +0100 Subject: [PATCH] sis5513: factor out UDMA programming code * Factor out UDMA programming code from sis_set_dma_mode() to per chipset family helpers: sis_{ata33,ata133}_program_udma_timings(). * Add sis_program_udma_timings() helper. * Remove unneeded casts to 'unsigned long'. * Minor cleanups. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sis5513.c | 78 ++++++++++++++++++++++----------------- 1 file changed, 45 insertions(+), 33 deletions(-) diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index d90b42917775..3f35386d9cad 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -305,11 +305,52 @@ static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) sis_program_timings(drive, XFER_PIO_0 + pio); } -static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) +static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; + struct pci_dev *dev = drive->hwif->pci_dev; + u32 regdw = 0; + u8 drive_pci = sis_ata133_get_base(drive), clk, idx; + + pci_read_config_dword(dev, drive_pci, ®dw); + + regdw |= 0x04; + regdw &= 0xfffff00f; + /* check if ATA133 enable */ + clk = (regdw & 0x08) ? ATA_133 : ATA_100; + idx = mode - XFER_UDMA_0; + regdw |= cycle_time_value[clk][idx] << 4; + regdw |= cvs_time_value[clk][idx] << 8; + + pci_write_config_dword(dev, drive_pci, regdw); +} + +static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode) +{ + struct pci_dev *dev = drive->hwif->pci_dev; + u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family; + + pci_read_config_byte(dev, drive_pci + 1, ®); + /* force the UDMA bit on if we want to use UDMA */ + reg |= 0x80; + /* clean reg cycle time bits */ + reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]); + /* set reg cycle time bits */ + reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i]; + + pci_write_config_byte(dev, drive_pci + 1, reg); +} + +static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode) +{ + if (chipset_family >= ATA_133) /* ATA_133 */ + sis_ata133_program_udma_timings(drive, mode); + else /* ATA_33/66/100a/100/133a */ + sis_ata33_program_udma_timings(drive, mode); +} + +static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ /* Config chip for mode */ switch(speed) { case XFER_UDMA_6: @@ -319,36 +360,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) case XFER_UDMA_2: case XFER_UDMA_1: case XFER_UDMA_0: - if (chipset_family >= ATA_133) { - u32 regdw = 0; - u8 drive_pci = sis_ata133_get_base(drive); - - pci_read_config_dword(dev, drive_pci, ®dw); - regdw |= 0x04; - regdw &= 0xfffff00f; - /* check if ATA133 enable */ - if (regdw & 0x08) { - regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4; - regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8; - } else { - regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4; - regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8; - } - pci_write_config_dword(dev, (unsigned long)drive_pci, regdw); - } else { - u8 drive_pci = 0x40 + drive->dn * 2, reg = 0; - - pci_read_config_byte(dev, drive_pci+1, ®); - /* Force the UDMA bit on if we want to use UDMA */ - reg |= 0x80; - /* clean reg cycle time bits */ - reg &= ~((0xFF >> (8 - cycle_time_range[chipset_family])) - << cycle_time_offset[chipset_family]); - /* set reg cycle time bits */ - reg |= cycle_time_value[chipset_family][speed-XFER_UDMA_0] - << cycle_time_offset[chipset_family]; - pci_write_config_byte(dev, drive_pci+1, reg); - } + sis_program_udma_timings(drive, speed); break; case XFER_MW_DMA_2: case XFER_MW_DMA_1: -- 2.30.2