From 41ca22a8c575b5f2e76150a30db5d1a934ed7ca9 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 14 Oct 2014 12:14:38 -0700 Subject: [PATCH] staging: comedi: usbdux: introduce usbduxsub_ai_handle_urb() Factor the urb handling and resubmit out of the analog input urb completion handler and tidy it up. This allows a common exit path to be used in the completion handler to stop the async command and handle the events. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Reviewed-by: Bernd Porr Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbdux.c | 174 +++++++++++------------- 1 file changed, 79 insertions(+), 95 deletions(-) diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 5fdbf2644e09..eae441f3858c 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -250,128 +250,112 @@ static int usbdux_ai_cancel(struct comedi_device *dev, return 0; } -/* analogue IN - interrupt service routine */ +static void usbduxsub_ai_handle_urb(struct comedi_device *dev, + struct comedi_subdevice *s, + struct urb *urb) +{ + struct usbdux_private *devpriv = dev->private; + struct comedi_async *async = s->async; + struct comedi_cmd *cmd = &async->cmd; + int ret; + int i; + + devpriv->ai_counter--; + if (devpriv->ai_counter == 0) { + devpriv->ai_counter = devpriv->ai_timer; + + if (cmd->stop_src == TRIG_COUNT) { + devpriv->ai_sample_count--; + if (devpriv->ai_sample_count < 0) { + async->events |= COMEDI_CB_EOA; + return; + } + } + + /* get the data from the USB bus and hand it over to comedi */ + for (i = 0; i < cmd->chanlist_len; i++) { + unsigned int range = CR_RANGE(cmd->chanlist[i]); + uint16_t val = le16_to_cpu(devpriv->in_buf[i]); + + /* bipolar data is two's-complement */ + if (comedi_range_is_bipolar(s, range)) + val ^= ((s->maxdata + 1) >> 1); + + /* transfer data */ + if (!comedi_buf_put(s, val)) + return; + } + async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS; + } + + /* if command is still running, resubmit urb */ + if (!(async->events & COMEDI_CB_CANCEL_MASK)) { + urb->dev = comedi_to_usb_dev(dev); + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret < 0) { + dev_err(dev->class_dev, + "urb resubmit failed in int-context! err=%d\n", + ret); + if (ret == -EL2NSYNC) + dev_err(dev->class_dev, + "buggy USB host controller or bug in IRQ handler!\n"); + async->events |= COMEDI_CB_ERROR; + } + } +} + static void usbduxsub_ai_isoc_irq(struct urb *urb) { struct comedi_device *dev = urb->context; struct comedi_subdevice *s = dev->read_subdev; + struct comedi_async *async = s->async; struct usbdux_private *devpriv = dev->private; - struct comedi_cmd *cmd = &s->async->cmd; - int i, err; - /* first we test if something unusual has just happened */ + /* exit if not running a command, do not resubmit urb */ + if (!devpriv->ai_cmd_running) + return; + switch (urb->status) { case 0: /* copy the result in the transfer buffer */ memcpy(devpriv->in_buf, urb->transfer_buffer, SIZEINBUF); + usbduxsub_ai_handle_urb(dev, s, urb); break; + case -EILSEQ: - /* error in the ISOchronous data */ - /* we don't copy the data into the transfer buffer */ - /* and recycle the last data byte */ + /* + * error in the ISOchronous data + * we don't copy the data into the transfer buffer + * and recycle the last data byte + */ dev_dbg(dev->class_dev, "CRC error in ISO IN stream\n"); + usbduxsub_ai_handle_urb(dev, s, urb); break; case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: case -ECONNABORTED: - /* happens after an unlink command */ - if (devpriv->ai_cmd_running) { - s->async->events |= COMEDI_CB_EOA; - s->async->events |= COMEDI_CB_ERROR; - comedi_event(dev, s); - /* stop the transfer w/o unlink */ - usbdux_ai_stop(dev, 0); - } - return; + /* after an unlink command, unplug, ... etc */ + async->events |= COMEDI_CB_ERROR; + break; default: - /* a real error on the bus */ - /* pass error to comedi if we are really running a command */ - if (devpriv->ai_cmd_running) { - dev_err(dev->class_dev, - "Non-zero urb status received in ai intr context: %d\n", - urb->status); - s->async->events |= COMEDI_CB_EOA; - s->async->events |= COMEDI_CB_ERROR; - comedi_event(dev, s); - /* don't do an unlink here */ - usbdux_ai_stop(dev, 0); - } - return; + /* a real error */ + dev_err(dev->class_dev, + "Non-zero urb status received in ai intr context: %d\n", + urb->status); + async->events |= COMEDI_CB_ERROR; + break; } /* - * at this point we are reasonably sure that nothing dodgy has happened - * are we running a command? + * comedi_handle_events() cannot be used in this driver. The (*cancel) + * operation would unlink the urb. */ - if (unlikely(!devpriv->ai_cmd_running)) { - /* - * not running a command, do not continue execution if no - * asynchronous command is running in particular not resubmit - */ - return; - } - - urb->dev = comedi_to_usb_dev(dev); - - /* resubmit the urb */ - err = usb_submit_urb(urb, GFP_ATOMIC); - if (unlikely(err < 0)) { - dev_err(dev->class_dev, - "urb resubmit failed in int-context! err=%d\n", err); - if (err == -EL2NSYNC) - dev_err(dev->class_dev, - "buggy USB host controller or bug in IRQ handler!\n"); - s->async->events |= COMEDI_CB_EOA; - s->async->events |= COMEDI_CB_ERROR; - comedi_event(dev, s); - /* don't do an unlink here */ + if (async->events & COMEDI_CB_CANCEL_MASK) usbdux_ai_stop(dev, 0); - return; - } - - devpriv->ai_counter--; - if (likely(devpriv->ai_counter > 0)) - return; - - /* timer zero, transfer measurements to comedi */ - devpriv->ai_counter = devpriv->ai_timer; - /* test, if we transmit only a fixed number of samples */ - if (cmd->stop_src == TRIG_COUNT) { - /* not continuous, fixed number of samples */ - devpriv->ai_sample_count--; - /* all samples received? */ - if (devpriv->ai_sample_count < 0) { - /* prevent a resubmit next time */ - usbdux_ai_stop(dev, 0); - /* say comedi that the acquistion is over */ - s->async->events |= COMEDI_CB_EOA; - comedi_event(dev, s); - return; - } - } - /* get the data from the USB bus and hand it over to comedi */ - for (i = 0; i < cmd->chanlist_len; i++) { - unsigned int range = CR_RANGE(cmd->chanlist[i]); - uint16_t val = le16_to_cpu(devpriv->in_buf[i]); - - /* bipolar data is two's-complement */ - if (comedi_range_is_bipolar(s, range)) - val ^= ((s->maxdata + 1) >> 1); - - /* transfer data */ - err = comedi_buf_put(s, val); - if (unlikely(err == 0)) { - /* buffer overflow */ - usbdux_ai_stop(dev, 0); - return; - } - } - /* tell comedi that data is there */ - s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOS; comedi_event(dev, s); } -- 2.30.2