From 412bce83ac786197d0b2805c5bcded4d95cdeeb0 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 26 Jun 2014 10:06:45 -0700 Subject: [PATCH] net: systemport: fix UniMAC reset logic The UniMAC CMD_SW_RESET bit is not a self-clearing bit, so we need to assert it, wait a bit and clear it manually. As a result, umac_reset() is updated not to return any value. The previous version of the code simply wrote 0 to the CMD register, which would make the busy-waiting loop exit immediately, having zero effect. By writing 0 to the CMD register, we were clearing all bits in the CMD register, and not using the hardware reset default values which are set on purpose. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 33 ++++++---------------- 1 file changed, 9 insertions(+), 24 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index f6bccd847ee6..d31f7d239064 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1254,28 +1254,17 @@ static inline void umac_enable_set(struct bcm_sysport_priv *priv, usleep_range(1000, 2000); } -static inline int umac_reset(struct bcm_sysport_priv *priv) +static inline void umac_reset(struct bcm_sysport_priv *priv) { - unsigned int timeout = 0; u32 reg; - int ret = 0; - - umac_writel(priv, 0, UMAC_CMD); - while (timeout++ < 1000) { - reg = umac_readl(priv, UMAC_CMD); - if (!(reg & CMD_SW_RESET)) - break; - - udelay(1); - } - - if (timeout == 1000) { - dev_err(&priv->pdev->dev, - "timeout waiting for MAC to come out of reset\n"); - ret = -ETIMEDOUT; - } - return ret; + reg = umac_readl(priv, UMAC_CMD); + reg |= CMD_SW_RESET; + umac_writel(priv, reg, UMAC_CMD); + udelay(10); + reg = umac_readl(priv, UMAC_CMD); + reg &= ~CMD_SW_RESET; + umac_writel(priv, reg, UMAC_CMD); } static void umac_set_hw_addr(struct bcm_sysport_priv *priv, @@ -1303,11 +1292,7 @@ static int bcm_sysport_open(struct net_device *dev) int ret; /* Reset UniMAC */ - ret = umac_reset(priv); - if (ret) { - netdev_err(dev, "UniMAC reset failed\n"); - return ret; - } + umac_reset(priv); /* Flush TX and RX FIFOs at TOPCTRL level */ topctrl_flush(priv); -- 2.30.2