From 4109cb023f7e51addee10d9fb184d0a3adc789b4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 22 Oct 2014 21:34:49 +0200 Subject: [PATCH] ppc: Zap HWW1U1A board This is the only used of CONFIG_SPI_X macro, just zap this. Signed-off-by: Marek Vasut Cc: Masahiro Yamada Cc: Tom Rini Cc: Wolfgang Denk Cc: Simon Glass Cc: Heiko Schocher --- arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/exmeritus/hww1u1a/Kconfig | 12 - board/exmeritus/hww1u1a/MAINTAINERS | 6 - board/exmeritus/hww1u1a/Makefile | 12 - board/exmeritus/hww1u1a/ddr.c | 34 -- board/exmeritus/hww1u1a/gpios.h | 56 ---- board/exmeritus/hww1u1a/hww1u1a.c | 268 ---------------- board/exmeritus/hww1u1a/law.c | 18 -- board/exmeritus/hww1u1a/tlb.c | 90 ------ configs/HWW1U1A_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/HWW1U1A.h | 460 ---------------------------- 12 files changed, 1 insertion(+), 963 deletions(-) delete mode 100644 board/exmeritus/hww1u1a/Kconfig delete mode 100644 board/exmeritus/hww1u1a/MAINTAINERS delete mode 100644 board/exmeritus/hww1u1a/Makefile delete mode 100644 board/exmeritus/hww1u1a/ddr.c delete mode 100644 board/exmeritus/hww1u1a/gpios.h delete mode 100644 board/exmeritus/hww1u1a/hww1u1a.c delete mode 100644 board/exmeritus/hww1u1a/law.c delete mode 100644 board/exmeritus/hww1u1a/tlb.c delete mode 100644 configs/HWW1U1A_defconfig delete mode 100644 include/configs/HWW1U1A.h diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 8c1c01c342..c0bb67b539 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -13,9 +13,6 @@ config TARGET_SBC8548 config TARGET_SOCRATES bool "Support socrates" -config TARGET_HWW1U1A - bool "Support HWW1U1A" - config TARGET_B4860QDS bool "Support B4860QDS" @@ -144,7 +141,6 @@ config TARGET_XPEDITE550X endchoice -source "board/exmeritus/hww1u1a/Kconfig" source "board/freescale/b4860qds/Kconfig" source "board/freescale/bsc9131rdb/Kconfig" source "board/freescale/bsc9132qds/Kconfig" diff --git a/board/exmeritus/hww1u1a/Kconfig b/board/exmeritus/hww1u1a/Kconfig deleted file mode 100644 index 7a76b4358e..0000000000 --- a/board/exmeritus/hww1u1a/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_HWW1U1A - -config SYS_BOARD - default "hww1u1a" - -config SYS_VENDOR - default "exmeritus" - -config SYS_CONFIG_NAME - default "HWW1U1A" - -endif diff --git a/board/exmeritus/hww1u1a/MAINTAINERS b/board/exmeritus/hww1u1a/MAINTAINERS deleted file mode 100644 index b37f10b17a..0000000000 --- a/board/exmeritus/hww1u1a/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -HWW1U1A BOARD -#M: Kyle Moffett -S: Orphan (since 2014-06) -F: board/exmeritus/hww1u1a/ -F: include/configs/HWW1U1A.h -F: configs/HWW1U1A_defconfig diff --git a/board/exmeritus/hww1u1a/Makefile b/board/exmeritus/hww1u1a/Makefile deleted file mode 100644 index d0cd87828e..0000000000 --- a/board/exmeritus/hww1u1a/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright 2007-2009 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += hww1u1a.o -obj-y += law.o -obj-y += tlb.o -obj-$(CONFIG_DDR_SPD) += ddr.o diff --git a/board/exmeritus/hww1u1a/ddr.c b/board/exmeritus/hww1u1a/ddr.c deleted file mode 100644 index e1f6865f42..0000000000 --- a/board/exmeritus/hww1u1a/ddr.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2009-2010 eXMeritus, A Boeing Company - * Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include - -#include -#include - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * We only support one DIMM, so according to the P2020 docs we should - * set the options as follows: - */ - popts->cs_local_opts[0].odt_rd_cfg = 0; - popts->cs_local_opts[0].odt_wr_cfg = 4; - popts->cs_local_opts[1].odt_rd_cfg = 0; - popts->cs_local_opts[1].odt_wr_cfg = 0; - popts->half_strength_driver_enable = 0; - - /* Manually configured for our static clock rate */ - popts->clk_adjust = 4; - popts->cpo_override = 4; - popts->write_data_delay = 2; - popts->twot_en = 0; -} diff --git a/board/exmeritus/hww1u1a/gpios.h b/board/exmeritus/hww1u1a/gpios.h deleted file mode 100644 index 499880f1a0..0000000000 --- a/board/exmeritus/hww1u1a/gpios.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Copyright 2010 eXMeritus, A Boeing Company - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -/* Common CPU A/B GPIOs (GPIO8-GPIO15 and IRQ4-IRQ6) */ -#define GPIO_CPU_ID (1UL << (31 - 8)) -#define GPIO_BLUE_LED (1UL << (31 - 9)) -#define GPIO_DIMM_RESET (1UL << (31 - 10)) -#define GPIO_USB_RESET (1UL << (31 - 11)) -#define GPIO_UNUSED_12 (1UL << (31 - 12)) -#define GPIO_GETH0_RESET (1UL << (31 - 13)) -#define GPIO_RS422_RE (1UL << (31 - 14)) -#define GPIO_RS422_DE (1UL << (31 - 15)) -#define IRQ_I2CINT (1UL << (31 - 20)) -#define IRQ_FANINT (1UL << (31 - 21)) -#define IRQ_DIMM_EVENT (1UL << (31 - 22)) - -#define GPIO_RESETS (GPIO_DIMM_RESET|GPIO_USB_RESET|GPIO_GETH0_RESET) - -/* CPU A GPIOS (GPIO0-GPIO7 and IRQ0-IRQ3) */ -#define GPIO_CPUA_UNUSED_0 (1UL << (31 - 0)) -#define GPIO_CPUA_CPU_READY (1UL << (31 - 1)) -#define GPIO_CPUA_DEBUG_LED2 (1UL << (31 - 2)) -#define GPIO_CPUA_DEBUG_LED1 (1UL << (31 - 3)) -#define GPIO_CPUA_TDIS2B (1UL << (31 - 4)) /* MAC 2 TX B */ -#define GPIO_CPUA_TDIS2A (1UL << (31 - 5)) /* MAC 2 TX A */ -#define GPIO_CPUA_TDIS1B (1UL << (31 - 6)) /* MAC 1 TX B */ -#define GPIO_CPUA_TDIS1A (1UL << (31 - 7)) /* MAC 1 TX A */ -#define IRQ_CPUA_UNUSED_0 (1UL << (31 - 16)) -#define IRQ_CPUA_UNUSED_1 (1UL << (31 - 17)) -#define IRQ_CPUA_UNUSED_2 (1UL << (31 - 18)) -#define IRQ_CPUA_UNUSED_3 (1UL << (31 - 19)) - -/* CPU B GPIOS (GPIO0-GPIO7 and IRQ0-IRQ3) */ -#define GPIO_CPUB_RMUX_SEL1B (1UL << (31 - 0)) -#define GPIO_CPUB_RMUX_SEL0B (1UL << (31 - 1)) -#define GPIO_CPUB_RMUX_SEL1A (1UL << (31 - 2)) -#define GPIO_CPUB_RMUX_SEL0A (1UL << (31 - 3)) -#define GPIO_CPUB_UNUSED_4 (1UL << (31 - 4)) -#define GPIO_CPUB_CPU_READY (1UL << (31 - 5)) -#define GPIO_CPUB_DEBUG_LED2 (1UL << (31 - 6)) -#define GPIO_CPUB_DEBUG_LED1 (1UL << (31 - 7)) -#define IRQ_CPUB_SD_1A (1UL << (31 - 16)) -#define IRQ_CPUB_SD_2B (1UL << (31 - 17)) -#define IRQ_CPUB_SD_2A (1UL << (31 - 18)) -#define IRQ_CPUB_SD_1B (1UL << (31 - 19)) - -/* If it isn't CPU A then it's CPU B */ -static inline unsigned int hww1u1a_is_cpu_a(void) -{ - return !mpc85xx_gpio_get(GPIO_CPU_ID); -} diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c deleted file mode 100644 index 643ece1ae6..0000000000 --- a/board/exmeritus/hww1u1a/hww1u1a.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright 2009-2011 eXMeritus, A Boeing Company - * Copyright 2007-2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "gpios.h" - -DECLARE_GLOBAL_DATA_PTR; - -int checkboard(void) -{ - unsigned int gpio_high = 0; - unsigned int gpio_low = 0; - unsigned int gpio_in = 0; - unsigned int i; - struct ccsr_ddr __iomem *ddr; - - puts("Board: HWW-1U-1A "); - - /* - * First just figure out which CPU we're on, then use that to - * configure the lists of other GPIOs to be programmed. - */ - mpc85xx_gpio_set_in(GPIO_CPU_ID); - if (hww1u1a_is_cpu_a()) { - puts("CPU A\n"); - - /* We want to turn on some LEDs */ - gpio_high |= GPIO_CPUA_CPU_READY; - gpio_low |= GPIO_CPUA_DEBUG_LED1; - gpio_low |= GPIO_CPUA_DEBUG_LED2; - - /* Disable the unused transmitters */ - gpio_low |= GPIO_CPUA_TDIS1A; - gpio_high |= GPIO_CPUA_TDIS1B; - gpio_low |= GPIO_CPUA_TDIS2A; - gpio_high |= GPIO_CPUA_TDIS2B; - } else { - puts("CPU B\n"); - - /* We want to turn on some LEDs */ - gpio_high |= GPIO_CPUB_CPU_READY; - gpio_low |= GPIO_CPUB_DEBUG_LED1; - gpio_low |= GPIO_CPUB_DEBUG_LED2; - - /* Enable the appropriate receivers */ - gpio_high |= GPIO_CPUB_RMUX_SEL0A; - gpio_high |= GPIO_CPUB_RMUX_SEL0B; - gpio_low |= GPIO_CPUB_RMUX_SEL1A; - gpio_low |= GPIO_CPUB_RMUX_SEL1B; - } - - /* These GPIOs are common */ - gpio_in |= IRQ_I2CINT | IRQ_FANINT | IRQ_DIMM_EVENT; - gpio_low |= GPIO_RS422_RE; - gpio_high |= GPIO_RS422_DE; - - /* Ok, now go ahead and program all of those in one go */ - mpc85xx_gpio_set(gpio_high|gpio_low|gpio_in, - gpio_high|gpio_low, - gpio_high); - - /* - * If things have been taken out of reset early (for example, by one - * of the BDI3000 debuggers), then we need to put them back in reset - * and delay a while before we continue. - */ - if (mpc85xx_gpio_get(GPIO_RESETS)) { - ddr = (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - - puts("Debugger detected... extra device reset enabled!\n"); - - /* Put stuff into reset and disable the DDR controller */ - mpc85xx_gpio_set_low(GPIO_RESETS); - out_be32(&ddr->sdram_cfg, 0x00000000); - - puts(" Waiting 1 sec for reset..."); - for (i = 0; i < 10; i++) { - udelay(100000); - puts("."); - } - puts("\n"); - } - - /* Now bring everything back out of reset again */ - mpc85xx_gpio_set_high(GPIO_RESETS); - return 0; -} - -/* - * This little shell function just returns whether or not it's CPU A. - * It can be used to select the right device-tree when booting, etc. - */ -int do_hww1u1a_test_cpu_a(cmd_tbl_t *cmdtp, int flag, - int argc, char * const argv[]) -{ - if (argc > 1) - cmd_usage(cmdtp); - - if (hww1u1a_is_cpu_a()) - return 0; - else - return 1; -} -U_BOOT_CMD( - test_cpu_a, 1, 0, do_hww1u1a_test_cpu_a, - "Test if this is CPU A (versus B) on the eXMeritus HWW-1U-1A board", - "" -); - -/* Create a prompt-like string: "uboot@HOSTNAME% " */ -#define PROMPT_PREFIX "uboot@exm" -#define PROMPT_SUFFIX "% " - -/* This function returns a PS1 prompt based on the serial number */ -static char *hww1u1a_prompt; -const char *hww1u1a_get_ps1(void) -{ - unsigned long len, i, j; - const char *serialnr; - - /* If our prompt was already set, just use that */ - if (hww1u1a_prompt) - return hww1u1a_prompt; - - /* Use our serial number if present, otherwise a default */ - serialnr = getenv("serial#"); - if (!serialnr || !serialnr[0]) - serialnr = "999999-X"; - - /* - * We will turn the serial number into a hostname by: - * (A) Delete all non-alphanumerics. - * (B) Lowercase all letters. - * (C) Prefix "exm". - * (D) Suffix "a" for CPU A and "b" for CPU B. - */ - for (i = 0, len = 0; serialnr[i]; i++) { - if (isalnum(serialnr[i])) - len++; - } - - len += sizeof(PROMPT_PREFIX PROMPT_SUFFIX) + 1; /* Includes NUL */ - hww1u1a_prompt = malloc(len); - if (!hww1u1a_prompt) - return PROMPT_PREFIX "UNKNOWN(ENOMEM)" PROMPT_SUFFIX; - - /* Now actually fill it in */ - i = 0; - - /* Handle the prefix */ - for (j = 0; j < sizeof(PROMPT_PREFIX) - 1; j++) - hww1u1a_prompt[i++] = PROMPT_PREFIX[j]; - - /* Now the serial# part of the hostname */ - for (j = 0; serialnr[j]; j++) - if (isalnum(serialnr[j])) - hww1u1a_prompt[i++] = tolower(serialnr[j]); - - /* Now the CPU id ("a" or "b") */ - hww1u1a_prompt[i++] = hww1u1a_is_cpu_a() ? 'a' : 'b'; - - /* Finally the suffix */ - for (j = 0; j < sizeof(PROMPT_SUFFIX); j++) - hww1u1a_prompt[i++] = PROMPT_SUFFIX[j]; - - /* This should all have added up, but just in case */ - hww1u1a_prompt[len - 1] = '\0'; - - /* Now we're done */ - return hww1u1a_prompt; -} - -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap bootflash region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for FLASH */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); - - return 0; -} - -int board_eth_init(bd_t *bis) -{ - struct tsec_info_struct tsec_info[4]; - struct fsl_pq_mdio_info mdio_info; - - SET_STD_TSEC_INFO(tsec_info[0], 1); - SET_STD_TSEC_INFO(tsec_info[1], 2); - SET_STD_TSEC_INFO(tsec_info[2], 3); - - if (hww1u1a_is_cpu_a()) - tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUA; - else - tsec_info[2].phyaddr = TSEC3_PHY_ADDR_CPUB; - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, 3); - return pci_eth_init(bis); -} - -void ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - - FT_FSL_PCI_SETUP; -} diff --git a/board/exmeritus/hww1u1a/law.c b/board/exmeritus/hww1u1a/law.c deleted file mode 100644 index c7dc58d596..0000000000 --- a/board/exmeritus/hww1u1a/law.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/exmeritus/hww1u1a/tlb.c b/board/exmeritus/hww1u1a/tlb.c deleted file mode 100644 index 7f5a36f1eb..0000000000 --- a/board/exmeritus/hww1u1a/tlb.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright 2009-2010 eXMeritus, A Boeing Company - * Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 0 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 0 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Boot page */ - SET_TLB_ENTRY(1, CONFIG_BPTR_VIRT_ADDR, - CONFIG_BPTR_VIRT_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, - CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - /* - * W**G* - FLASH (Will be *I*G* after relocation to RAM) - * - * This maps both SPI FLASH chips (128MByte per chip) - */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* - * *I*G* - PCI memory - * - * We have 1.5GB total PCI-E memory space to map and we want to use - * the minimum possible number of TLB entries. Since Book-E TLB - * entries are sized in powers of 4, we use 1GB + 256MB + 256MB. - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, - CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), - - /* - * *I*G* - PCI I/O - * - * This one entry covers all 3 64k PCI-E I/O windows - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, - CONFIG_SYS_PCIE3_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/configs/HWW1U1A_defconfig b/configs/HWW1U1A_defconfig deleted file mode 100644 index 8947be279b..0000000000 --- a/configs/HWW1U1A_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_HWW1U1A=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 23fd760abb..848862c5e2 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +HWW1U1A powerpc mpc85xx - - Kyle Moffett hymod powerpc mpc8260 - - Murray Jensen MHPC powerpc mpc8xx - - Frank Gottschling ICU862 powerpc mpc8xx - - Wolfgang Denk diff --git a/include/configs/HWW1U1A.h b/include/configs/HWW1U1A.h deleted file mode 100644 index 6a3a11cb7f..0000000000 --- a/include/configs/HWW1U1A.h +++ /dev/null @@ -1,460 +0,0 @@ -/* - * Copyright 2009-2010 eXMeritus, A Boeing Company - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * HardwareWall HWW-1U-1A airborne unit configuration file - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High-level system configuration options */ -#define CONFIG_BOOKE /* Power/PowerPC Book-E */ -#define CONFIG_E500 /* e500 (Power ISA v2.03 with SPE) */ -#define CONFIG_FSL_ELBC /* FreeScale Enhanced LocalBus Cntlr */ -#define CONFIG_FSL_LAW /* FreeScale Local Access Window */ -#define CONFIG_P2020 /* FreeScale P2020 */ -#define CONFIG_HWW1U1A /* eXMeritus HardwareWall HWW-1U-1A */ -#define CONFIG_MP /* Multiprocessing support */ -#define CONFIG_HWCONFIG /* Use hwconfig from environment */ - -#define CONFIG_L2_CACHE /* L2 cache enabled */ -#define CONFIG_BTB /* Branch predition enabled */ - -#define CONFIG_PANIC_HANG /* No board reset on panic */ -#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r() */ -#define CONFIG_CMD_REGINFO /* Dump various CPU regs */ - -/* - * Allow the use of 36-bit physical addresses. Device-trees with 64-bit - * addresses have known compatibility issues with some existing kernels. - */ -#define CONFIG_ENABLE_36BIT_PHYS -#define CONFIG_PHYS_64BIT -#define CONFIG_ADDR_MAP -#define CONFIG_SYS_NUM_ADDR_MAP 16 /* Number of entries in TLB1 */ - -/* Reserve plenty of RAM for malloc (we have 2GB+) */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) - -/* How much L2 cache do we map so we can use it as RAM */ -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -/* This is our temporary global data area just above the stack */ -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - -/* The stack grows down from the global data area */ -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* Enable IRQs and watchdog with a 1000Hz system decrementer */ -#define CONFIG_CMD_IRQ - -/* -------------------------------------------------------------------- */ - -/* - * Clock crystal configuration: - * (1) SYS: 66.666MHz +/- 50ppm (drives CPU/PCI/DDR) - * (2) CCB: Multiplier from SYS_CLK - * (3) RTC: 25.000MHz +/- 50ppm (sampled against CCB clock) - */ -#define CONFIG_SYS_CLK_FREQ 66666000/*Hz*/ -#define CONFIG_DDR_CLK_FREQ 66666000/*Hz*/ - - -/* -------------------------------------------------------------------- */ - -/* - * Memory map - * - * 0x0000_0000 0x7fff_ffff 2G DDR2 ECC SDRAM - * 0x8000_0000 0x9fff_ffff 512M PCI-E Bus 1 - * 0xa000_0000 0xbfff_ffff 512M PCI-E Bus 2 (unused) - * 0xc000_0000 0xdfff_ffff 512M PCI-E Bus 3 - * 0xe000_0000 0xe7ff_ffff 128M Spansion FLASH - * 0xe800_0000 0xefff_ffff 128M Spansion FLASH - * 0xffd0_0000 0xffd0_3fff 16K L1 boot stack (TLB0) - * 0xffe0_0000 0xffef_ffff 1M CCSR - * 0xffe0_5000 0xffe0_5fff 4K Enhanced LocalBus Controller - */ - -/* Virtual Memory Map */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 -#define CONFIG_SYS_FLASH_BASE 0xe0000000 -#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 -#define CONFIG_SYS_CCSRBAR 0xffe00000 /* CCSRBAR @ runtime */ - -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -/* Physical Memory Map */ -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull -#define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull -#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull -#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfffd00000ull -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf /* for ASM code */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xffd00000 /* for ASM code */ -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf /* for ASM code */ -#define CONFIG_SYS_CCSRBAR_PHYS_LOW 0xffe00000 /* for ASM code */ - - -/* -------------------------------------------------------------------- */ - -/* U-Boot image (MONITOR_BASE == TEXT_BASE) */ -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc /* Top address in flash */ -#define CONFIG_SYS_TEXT_BASE 0xeff80000 /* Start of U-Boot image */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN 0x80000 /* 512kB (4 flash sectors) */ - -/* - * U-Boot Environment Image: The two sectors immediately below U-Boot - * form the U-Boot environment (regular and redundant). - */ -#define CONFIG_ENV_IS_IN_FLASH /* The environment image is stored in FLASH */ -#define CONFIG_ENV_OVERWRITE /* Allow "protected" variables to be erased */ -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128kB (1 flash sector) */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) - -/* Only use 8kB of each environment sector for data */ -#define CONFIG_ENV_SIZE 0x2000 /* 8kB */ -#define CONFIG_ENV_SIZE_REDUND 0x2000 /* 8kB */ - - -/* -------------------------------------------------------------------- */ - -/* Serial Console Configuration */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Echo back characters received during a serial download */ -#define CONFIG_LOADS_ECHO - -/* Allow a serial-download to temporarily change baud */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE - - -/* -------------------------------------------------------------------- */ - -/* PCI and PCI-Express Support */ -#define CONFIG_PCI /* Enable PCI/PCIE */ -#define CONFIG_PCI_PNP /* Scan PCI busses */ -#define CONFIG_CMD_PCI /* Enable the "pci" command */ -#define CONFIG_FSL_PCI_INIT /* Common FreeScale PCI initialization */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET /* We have PCI-E reset errata */ -#define CONFIG_SYS_PCI_64BIT /* PCI resources are 64-bit */ -#define CONFIG_PCI_SCAN_SHOW /* Display PCI scan during boot */ - -/* Enable 2 of the 3 PCI-E controllers */ -#define CONFIG_PCIE3 -#undef CONFIG_PCIE2 -#define CONFIG_PCIE1 - -/* Display human-readable names when initializing */ -#define CONFIG_SYS_PCIE3_NAME "Intel 82571EB" -#define CONFIG_SYS_PCIE2_NAME "Unused" -#define CONFIG_SYS_PCIE1_NAME "Silicon Image SIL3531" - -/* - * PCI bus addresses - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 - - -/* -------------------------------------------------------------------- */ - -/* Generic FreeScale hardware I2C support */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } -#define CONFIG_CMD_I2C - -/* DDR2 SO-RDIMM SPD EEPROM is at I2C0-0x51 */ -#define CONFIG_SYS_SPD_BUS_NUM 0 -#define SPD_EEPROM_ADDRESS 0x51 - -/* DS1339 RTC is at I2C0-0x68 (I know it says "DS1337", it's a DS1339) */ -#define CONFIG_CMD_DATE -#define CONFIG_RTC_DS1337 -#define CONFIG_SYS_RTC_BUS_NUM 0 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -/* Turn off RTC square-wave output to save battery */ -#define CONFIG_SYS_RTC_DS1337_NOOSC - -/* - * AT24C128N EEPROM at I2C0-0x53. - * - * That Atmel EEPROM has 128kbit of memory (16kByte) divided into 256 pages - * of 64 bytes per page. The chip uses 2-byte addresses and has a max write - * cycle time of 20ms according to the datasheet. - * - * NOTE: Our environment is stored on regular direct-attached FLASH, this - * chip is only used as a write-protected backup for certain key settings - * such as the serial# and macaddr values. (EG: "env import") - */ -#define CONFIG_CMD_EEPROM -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 1 << 6 == 64 byte pages */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 21 - -/* - * PCA9554 is at I2C1-0x3f (I know it says "PCA953X", it's a PCA9554). You - * must first select the I2C1 bus with "i2c dev 1" or the "pca953x" command - * will not be able to access the chip. - */ -#define CONFIG_PCA953X -#define CONFIG_CMD_PCA953X -#define CONFIG_CMD_PCA953X_INFO -#define CONFIG_SYS_I2C_PCA953X_ADDR 0x3f - - -/* -------------------------------------------------------------------- */ - -/* FreeScale DDR2/3 SDRAM Controller */ -#define CONFIG_SYS_FSL_DDR2 /* Our SDRAM slot is DDR2 */ -#define CONFIG_DDR_ECC /* Enable ECC by default */ -#define CONFIG_DDR_SPD /* Detect DDR config from SPD EEPROM */ -#define CONFIG_SPD_EEPROM /* ...why 2 config variables for this? */ -#define CONFIG_VERY_BIG_RAM /* Allow 2GB+ of RAM */ -#define CONFIG_CMD_SDRAM - -/* Standard P2020 DDR controller parameters */ -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* Make sure to tell the DDR controller to preinitialze all of RAM */ -#define CONFIG_MEM_INIT_VALUE 0xDEADBEEF -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER - - -/* -------------------------------------------------------------------- */ - -/* FLASH Memory Configuration (2x 128MB SPANSION FLASH) */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 - -/* Flash banks (2x 128MB) */ -#define FLASH0_PHYS (CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000ull) -#define FLASH1_PHYS (CONFIG_SYS_FLASH_BASE_PHYS + 0x0000000ull) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_MAX_FLASH_SECT 1024 -#define CONFIG_SYS_FLASH_BANKS_LIST { FLASH0_PHYS, FLASH1_PHYS } - -/* - * Flash access modes and timings (values are the defaults after a RESET). - * - * NOTE: These could probably be optimized but are more than sufficient for - * this particular system for the moment. - */ -#define FLASH_BRx (BR_PS_16 | BR_MS_GPCM | BR_V) -#define FLASH_ORx (OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) - -/* Configure both flash banks */ -#define CONFIG_SYS_BR0_PRELIM (FLASH_BRx | BR_PHYS_ADDR(FLASH0_PHYS)) -#define CONFIG_SYS_BR1_PRELIM (FLASH_BRx | BR_PHYS_ADDR(FLASH1_PHYS)) -#define CONFIG_SYS_OR0_PRELIM (FLASH_ORx | OR_AM_128MB) -#define CONFIG_SYS_OR1_PRELIM (FLASH_ORx | OR_AM_128MB) - -/* Flash timeouts (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000UL /* Erase (60s) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500UL /* Write (0.5s) */ - -/* Quiet flash testing */ -#define CONFIG_SYS_FLASH_QUIET_TEST - -/* Make program/erase count down from 45/5 (9....8....7....) */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 - - -/* -------------------------------------------------------------------- */ - -/* Ethernet Device Support */ -#define CONFIG_MII /* Enable MII PHY code */ -#define CONFIG_MII_DEFAULT_TSEC /* ??? Copied from P2020DS */ -#define CONFIG_PHY_GIGE /* Support Gigabit PHYs */ -#define CONFIG_ETHPRIME "e1000#0" /* Default to external ports */ - -/* Turn on various helpful networking commands */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING - -/* On-chip FreeScale P2020 "tsec" Ethernet (oneway fibers and peer) */ -#define CONFIG_TSEC_ENET -#define CONFIG_TSEC1 -#define CONFIG_TSEC2 -#define CONFIG_TSEC3 -#define CONFIG_TSEC1_NAME "owt0" -#define CONFIG_TSEC2_NAME "owt1" -#define CONFIG_TSEC3_NAME "peer" -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 3 -#define TSEC3_PHY_ADDR 4 -#define TSEC3_PHY_ADDR_CPUA 4 -#define TSEC3_PHY_ADDR_CPUB 5 - -/* PCI-E dual-port E1000 (external ethernet ports) */ -#define CONFIG_E1000 -#define CONFIG_E1000_SPI -#define CONFIG_E1000_SPI_GENERIC -#define CONFIG_CMD_E1000 - -/* We need the SPI infrastructure to poke the E1000's EEPROM */ -#define CONFIG_SPI -#define CONFIG_SPI_X -#define CONFIG_CMD_SPI -#define MAX_SPI_BYTES 32 - - -/* -------------------------------------------------------------------- */ - -/* USB Thumbdrive Device Support */ -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_FSL -#define CONFIG_USB_STORAGE -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_USB - -/* Partition and Filesystem support */ -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_ISO_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - - -/* -------------------------------------------------------------------- */ - -/* Command line configuration. */ -#define CONFIG_CMDLINE_EDITING /* Enable command editing */ -#define CONFIG_COMMAND_HISTORY /* Enable command history */ -#define CONFIG_AUTO_COMPLETE /* Enable command completion */ -#define CONFIG_SYS_LONGHELP /* Enable detailed command help */ -#define CONFIG_SYS_MAXARGS 128 /* Up to 128 command-line args */ -#define CONFIG_SYS_PBSIZE 8192 /* Allow up to 8k printed lines */ -#define CONFIG_SYS_CBSIZE 4096 /* Allow up to 4k command lines */ -#define CONFIG_SYS_BARGSIZE 4096 /* Allow up to 4k boot args */ -#define CONFIG_SYS_HUSH_PARSER /* Enable a fancier shell */ - -/* A little extra magic here for the prompt */ -#define CONFIG_SYS_PROMPT hww1u1a_get_ps1() -#ifndef __ASSEMBLY__ -const char *hww1u1a_get_ps1(void); -#endif - -/* Include a bunch of default commands we probably want */ -#include - -/* Other helpful shell-like commands */ -#define CONFIG_MD5 -#define CONFIG_SHA1 -#define CONFIG_CMD_MD5SUM -#define CONFIG_CMD_SHA1SUM -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_SETEXPR - - -/* -------------------------------------------------------------------- */ - -/* Image manipulation and booting */ - -/* We use the OpenFirmware-esque "Flattened Device Tree" */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_CMD_ELF -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Maximum kernel memory map */ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Maximum kernel size of 64MB */ - -/* This is the default address for commands with an optional address arg */ -#define CONFIG_LOADADDR 100000 -#define CONFIG_SYS_LOAD_ADDR 0x100000 - -/* Test memory starting from the default load address to just below 2GB */ -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_LOAD_ADDR -#define CONFIG_SYS_MEMTEST_END 0x7f000000 - -#define CONFIG_BOOTDELAY 20 -#define CONFIG_BOOTCOMMAND "echo Not yet flashed" -#define CONFIG_BOOTARGS "" -#define CONFIG_BOOTARGS_DYNAMIC "console=ttyS0,${baudrate}n1" - -/* Extra environment parameters */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ethprime=e1000#0\0" \ - "ethrotate=no\0" \ - "setbootargs=setenv bootargs " \ - "\"${bootargs} "CONFIG_BOOTARGS_DYNAMIC"\"\0" \ - "perf_mode=performance\0" \ - "hwconfig=" "fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1;" \ - "usb1:dr_mode=host,phy_type=ulpi\0" \ - "flkernel=0xe8000000\0" \ - "flinitramfs=0xe8800000\0" \ - "fldevicetree=0xeff20000\0" \ - "flbootm=bootm ${flkernel} ${flinitramfs} ${fldevicetree}\0" \ - "flboot=run preboot; run flbootm\0" \ - "restore_eeprom=i2c dev 0 && " \ - "eeprom read $loadaddr 0x0000 0x2000 && " \ - "env import -c $loadaddr 0x2000\0" - -#endif /* __CONFIG_H */ -- 2.30.2