From 401175220d169ba2bfe7fbb50d73ccc9c1d6a635 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 30 Sep 2015 15:22:42 +0200 Subject: [PATCH] sunxi: power: Make all voltages configurable through Kconfig On boards with axp221/223 pmic-s we already allow configuring most voltages. Make the Kconfig options for these also apply to boards with axp152 / axp209 pmic-s and extend them to configure all voltages. The Kconfig defaults are chosen so that this commit does not introduce any functional changes. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- board/sunxi/board.c | 48 +++---- configs/CSQ_CS908_defconfig | 4 +- configs/Colombus_defconfig | 4 +- configs/Hummingbird_A31_defconfig | 2 +- configs/MSI_Primo81_defconfig | 2 +- configs/Mele_A1000G_quad_defconfig | 8 +- configs/Mele_I7_defconfig | 8 +- configs/Mele_M9_defconfig | 8 +- configs/Sinlinx_SinA33_defconfig | 2 +- configs/ga10h_v1_1_defconfig | 4 +- configs/gt90h_v4_defconfig | 6 +- configs/mixtile_loftq_defconfig | 2 +- configs/q8_a23_tablet_800x480_defconfig | 4 +- configs/q8_a33_tablet_1024x600_defconfig | 4 +- configs/q8_a33_tablet_800x480_defconfig | 4 +- drivers/power/Kconfig | 174 +++++++++++++++++------ 16 files changed, 185 insertions(+), 99 deletions(-) diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 096d12791c..55a880ebb7 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -440,36 +440,36 @@ void sunxi_board_init(void) #ifdef CONFIG_AXP152_POWER power_failed = axp152_init(); - power_failed |= axp152_set_dcdc2(1400); - power_failed |= axp152_set_dcdc3(1500); - power_failed |= axp152_set_dcdc4(1250); - power_failed |= axp152_set_ldo2(3000); + power_failed |= axp152_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); + power_failed |= axp152_set_dcdc3(CONFIG_AXP_DCDC3_VOLT); + power_failed |= axp152_set_dcdc4(CONFIG_AXP_DCDC4_VOLT); + power_failed |= axp152_set_ldo2(CONFIG_AXP_ALDO2_VOLT); #endif #ifdef CONFIG_AXP209_POWER power_failed |= axp209_init(); - power_failed |= axp209_set_dcdc2(1400); - power_failed |= axp209_set_dcdc3(1250); - power_failed |= axp209_set_ldo2(3000); - power_failed |= axp209_set_ldo3(2800); - power_failed |= axp209_set_ldo4(2800); + power_failed |= axp209_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); + power_failed |= axp209_set_dcdc3(CONFIG_AXP_DCDC3_VOLT); + power_failed |= axp209_set_ldo2(CONFIG_AXP_ALDO2_VOLT); + power_failed |= axp209_set_ldo3(CONFIG_AXP_ALDO3_VOLT); + power_failed |= axp209_set_ldo4(CONFIG_AXP_ALDO4_VOLT); #endif #ifdef CONFIG_AXP221_POWER power_failed = axp221_init(); - power_failed |= axp221_set_dcdc1(CONFIG_AXP221_DCDC1_VOLT); - power_failed |= axp221_set_dcdc2(CONFIG_AXP221_DCDC2_VOLT); - power_failed |= axp221_set_dcdc3(1200); /* VDD-CPU */ -#ifdef CONFIG_MACH_SUN6I - power_failed |= axp221_set_dcdc4(1200); /* A31:VDD-SYS */ -#else - power_failed |= axp221_set_dcdc4(0); /* A23:unused */ -#endif - power_failed |= axp221_set_dcdc5(1500); /* VCC-DRAM */ - power_failed |= axp221_set_dldo1(CONFIG_AXP221_DLDO1_VOLT); - power_failed |= axp221_set_dldo4(CONFIG_AXP221_DLDO4_VOLT); - power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT); - power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT); - power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT); - power_failed |= axp221_set_eldo(3, CONFIG_AXP221_ELDO3_VOLT); + power_failed |= axp221_set_dcdc1(CONFIG_AXP_DCDC1_VOLT); + power_failed |= axp221_set_dcdc2(CONFIG_AXP_DCDC2_VOLT); + power_failed |= axp221_set_dcdc3(CONFIG_AXP_DCDC3_VOLT); + power_failed |= axp221_set_dcdc4(CONFIG_AXP_DCDC4_VOLT); + power_failed |= axp221_set_dcdc5(CONFIG_AXP_DCDC5_VOLT); + power_failed |= axp221_set_aldo1(CONFIG_AXP_ALDO1_VOLT); + power_failed |= axp221_set_aldo2(CONFIG_AXP_ALDO2_VOLT); + power_failed |= axp221_set_aldo3(CONFIG_AXP_ALDO3_VOLT); + power_failed |= axp221_set_dldo1(CONFIG_AXP_DLDO1_VOLT); + power_failed |= axp221_set_dldo2(CONFIG_AXP_DLDO2_VOLT); + power_failed |= axp221_set_dldo3(CONFIG_AXP_DLDO3_VOLT); + power_failed |= axp221_set_dldo4(CONFIG_AXP_DLDO4_VOLT); + power_failed |= axp221_set_eldo(1, CONFIG_AXP_ELDO1_VOLT); + power_failed |= axp221_set_eldo(2, CONFIG_AXP_ELDO2_VOLT); + power_failed |= axp221_set_eldo(3, CONFIG_AXP_ELDO3_VOLT); #endif printf("DRAM:"); diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index 7c8eca883a..3ffd34eb5d 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -12,7 +12,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_ETH_DESIGNWARE=y -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 35f644a218..d680df1665 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -22,6 +22,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_ETH_DESIGNWARE=y -CONFIG_AXP221_ALDO1_VOLT=3300 -CONFIG_AXP221_ELDO3_VOLT=1800 +CONFIG_AXP_ALDO1_VOLT=3300 +CONFIG_AXP_ELDO3_VOLT=1800 CONFIG_USB_EHCI_HCD=y diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig index 35c746c968..02bcdbf56a 100644 --- a/configs/Hummingbird_A31_defconfig +++ b/configs/Hummingbird_A31_defconfig @@ -14,5 +14,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_ETH_DESIGNWARE=y -CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 9d667b7575..3d71bf50a7 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -16,7 +16,7 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_AXP221_DLDO1_VOLT=3300 +CONFIG_AXP_DLDO1_VOLT=3300 CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26" diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index 5e31ef61c7..e81e6b6a4a 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -12,9 +12,9 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_ETH_DESIGNWARE=y -CONFIG_AXP221_DCDC1_VOLT=3300 -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_DLDO4_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_AXP_DCDC1_VOLT=3300 +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_AXP_DLDO4_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig index 774a92f381..38cd845b45 100644 --- a/configs/Mele_I7_defconfig +++ b/configs/Mele_I7_defconfig @@ -12,8 +12,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_ETH_DESIGNWARE=y -CONFIG_AXP221_DCDC1_VOLT=3300 -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_DLDO4_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_AXP_DCDC1_VOLT=3300 +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_AXP_DLDO4_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig index b52e3c20ab..93a28a672e 100644 --- a/configs/Mele_M9_defconfig +++ b/configs/Mele_M9_defconfig @@ -12,8 +12,8 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_ETH_DESIGNWARE=y -CONFIG_AXP221_DCDC1_VOLT=3300 -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_DLDO4_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_AXP_DCDC1_VOLT=3300 +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_AXP_DLDO4_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig index 720f3dc2d5..79fa5bca7f 100644 --- a/configs/Sinlinx_SinA33_defconfig +++ b/configs/Sinlinx_SinA33_defconfig @@ -9,4 +9,4 @@ CONFIG_SPL=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_AXP_ALDO1_VOLT=3000 diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig index 417a89ce70..b288e828a4 100644 --- a/configs/ga10h_v1_1_defconfig +++ b/configs/ga10h_v1_1_defconfig @@ -21,7 +21,7 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3000 CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_HOST=y diff --git a/configs/gt90h_v4_defconfig b/configs/gt90h_v4_defconfig index e9aecc39a3..e6be718b74 100644 --- a/configs/gt90h_v4_defconfig +++ b/configs/gt90h_v4_defconfig @@ -20,7 +20,7 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_AXP221_DCDC2_VOLT=1100 -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_AXP_DCDC2_VOLT=1100 +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3000 CONFIG_USB_MUSB_HOST=y diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 26fc4ce610..ce81309b0f 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -13,5 +13,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_ETH_DESIGNWARE=y -CONFIG_AXP221_ALDO1_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y diff --git a/configs/q8_a23_tablet_800x480_defconfig b/configs/q8_a23_tablet_800x480_defconfig index 3a3afa5daa..4993fa994d 100644 --- a/configs/q8_a23_tablet_800x480_defconfig +++ b/configs/q8_a23_tablet_800x480_defconfig @@ -20,6 +20,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3000 CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_1024x600_defconfig b/configs/q8_a33_tablet_1024x600_defconfig index fbbf1286a5..d4279667fe 100644 --- a/configs/q8_a33_tablet_1024x600_defconfig +++ b/configs/q8_a33_tablet_1024x600_defconfig @@ -20,6 +20,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3000 CONFIG_USB_MUSB_HOST=y diff --git a/configs/q8_a33_tablet_800x480_defconfig b/configs/q8_a33_tablet_800x480_defconfig index 8e8aa92adf..7f5cc4760b 100644 --- a/configs/q8_a33_tablet_800x480_defconfig +++ b/configs/q8_a33_tablet_800x480_defconfig @@ -20,6 +20,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set -CONFIG_AXP221_DLDO1_VOLT=3300 -CONFIG_AXP221_ALDO1_VOLT=3000 +CONFIG_AXP_DLDO1_VOLT=3300 +CONFIG_AXP_ALDO1_VOLT=3000 CONFIG_USB_MUSB_HOST=y diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 37a41a26ec..befb8452a1 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -38,79 +38,165 @@ config AXP221_POWER endchoice -config AXP221_DCDC1_VOLT - int "axp221 dcdc1 voltage" +config AXP_DCDC1_VOLT + int "axp pmic dcdc1 voltage" depends on AXP221_POWER - default 3000 + default 3000 if MACH_SUN6I || MACH_SUN8I ---help--- - Set the voltage (mV) to program the axp221 dcdc1 at, set to 0 to - disable dcdc1. This is typically used as generic 3.3V IO voltage for - things like GPIO-s, sdcard interfaces, etc. On most boards this is - undervolted to 3.0V to safe battery. + Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to + disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for + generic 3.3V IO voltage for external devices like the lcd-panal and + sdcard interfaces, etc. On most boards dcdc1 is undervolted to 3.0V to + safe battery. On A31 devices dcdc1 is also used for VCC-IO. + +config AXP_DCDC2_VOLT + int "axp pmic dcdc2 voltage" + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER + default 1400 if AXP152_POWER || AXP209_POWER + default 1200 if MACH_SUN6I || MACH_SUN8I + ---help--- + Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to + disable dcdc2. + On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V. + On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V. + On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.2V. + +config AXP_DCDC3_VOLT + int "axp pmic dcdc3 voltage" + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER + default 1500 if AXP152_POWER + default 1250 if AXP209_POWER + default 1200 if MACH_SUN6I || MACH_SUN8I + ---help--- + Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to + disable dcdc3. + On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and + should be 1.25V. + On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V. + On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V. + +config AXP_DCDC4_VOLT + int "axp pmic dcdc4 voltage" + depends on AXP152_POWER || AXP221_POWER + default 1250 if AXP152_POWER + default 1200 if MACH_SUN6I + default 0 if MACH_SUN8I + ---help--- + Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to + disable dcdc4. + On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V. + On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V. + On A23 / A33 boards dcdc4 is unused and should be disabled. + +config AXP_DCDC5_VOLT + int "axp pmic dcdc5 voltage" + depends on AXP221_POWER + default 1500 if MACH_SUN6I || MACH_SUN8I + ---help--- + Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to + disable dcdc5. + On A23 / A31 / A33 boards dcdc5 is VCC-DRAM and should be 1.5V. -config AXP221_DCDC2_VOLT - int "axp221 dcdc2 voltage" +config AXP_ALDO1_VOLT + int "axp pmic (a)ldo1 voltage" depends on AXP221_POWER - default 1200 + default 0 + ---help--- + Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to + disable aldo1. + On A31 boards aldo1 is often used to power the wifi module. + On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V. + +config AXP_ALDO2_VOLT + int "axp pmic (a)ldo2 voltage" + depends on AXP152_POWER || AXP209_POWER || AXP221_POWER + default 3000 if AXP152_POWER || AXP209_POWER + default 0 if MACH_SUN6I + default 2500 if MACH_SUN8I + ---help--- + Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to + disable aldo2. + On A10(s) / A13 / A20 boards aldo2 is AVCC and should be 3.0V. + On A31 boards aldo2 is typically unused and should be disabled. + On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V. + On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V. + +config AXP_ALDO3_VOLT + int "axp pmic (a)ldo3 voltage" + depends on AXP209_POWER || AXP221_POWER + default 2800 if AXP209_POWER + default 3000 if MACH_SUN6I || MACH_SUN8I + ---help--- + Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to + disable aldo3. + On A10(s) / A13 / A20 boards aldo3 should be 2.8V. + On A23 / A31 / A33 boards aldo3 is VCC-PLL and AVCC and should be 3.0V. + +config AXP_ALDO4_VOLT + int "axp pmic (a)ldo4 voltage" + depends on AXP209_POWER + default 2800 if AXP209_POWER ---help--- - Set the voltage (mV) to program the axp221 dcdc2 at, set to 0 to - disable dcdc2. On A31 boards this is typically used for VDD-GPU, - on A23/A33 for VDD-SYS, this should normally be set to 1.2V. + Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to + disable aldo4. + On A10(s) / A13 / A20 boards aldo4 should be 2.8V. -config AXP221_DLDO1_VOLT - int "axp221 dldo1 voltage" +config AXP_DLDO1_VOLT + int "axp pmic dldo1 voltage" depends on AXP221_POWER default 0 ---help--- - Set the voltage (mV) to program the axp221 dldo1 at, set to 0 to - disable dldo1. On sun6i (A31) boards with ethernet this is often used + Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to + disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used to power the ethernet phy. On sun8i (A23) boards this is often used to power the wifi. -config AXP221_DLDO4_VOLT - int "axp221 dldo4 voltage" +config AXP_DLDO2_VOLT + int "axp pmic dldo2 voltage" depends on AXP221_POWER default 0 ---help--- - Set the voltage (mV) to program the axp221 dldo4 at, set to 0 to - disable dldo4. + Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to + disable dldo2. -config AXP221_ALDO1_VOLT - int "axp221 aldo1 voltage" +config AXP_DLDO3_VOLT + int "axp pmic dldo3 voltage" depends on AXP221_POWER default 0 ---help--- - Set the voltage (mV) to program the axp221 aldo1 at, set to 0 to - disable aldo1. On sun6i (A31) boards which have a wifi module this is - often used to power the wifi module. + Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to + disable dldo3. -config AXP221_ALDO2_VOLT - int "axp221 aldo2 voltage" +config AXP_DLDO4_VOLT + int "axp pmic dldo4 voltage" depends on AXP221_POWER - default 0 if MACH_SUN6I - default 2500 if MACH_SUN8I + default 0 + ---help--- + Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to + disable dldo4. + +config AXP_ELDO1_VOLT + int "axp pmic eldo1 voltage" + depends on AXP221_POWER + default 0 ---help--- - Set the voltage (mV) to program the axp221 aldo2 at, set to 0 to - disable aldo2. On sun6i (A31) boards this is typically unused and - should be disabled, if it is used for LPDDR2 it should be set to 1.8V. - On sun8i (A23) this is typically connected to VDD-DLL and must be set - to 2.5V. + Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to + disable eldo1. -config AXP221_ALDO3_VOLT - int "axp221 aldo3 voltage" +config AXP_ELDO2_VOLT + int "axp pmic eldo2 voltage" depends on AXP221_POWER - default 3000 + default 0 ---help--- - Set the voltage (mV) to program the axp221 aldo3 at, set to 0 to - disable aldo3. This is typically connected to VCC-PLL and AVCC and - must be set to 3V. + Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to + disable eldo2. -config AXP221_ELDO3_VOLT - int "axp221 eldo3 voltage" +config AXP_ELDO3_VOLT + int "axp pmic eldo3 voltage" depends on AXP221_POWER default 0 ---help--- - Set the voltage (mV) to program the axp221 eldo3 at, set to 0 to + Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to disable eldo3. On some A31(s) tablets it might be used to supply 1.2V for the SSD2828 chip (converter of parallel LCD interface into MIPI DSI). -- 2.30.2