From 3f61e5e1b97eed335bdd2f6befcc633f5d1dde07 Mon Sep 17 00:00:00 2001 From: Yen-Ting-Shen Date: Fri, 1 Nov 2019 15:47:28 +0800 Subject: [PATCH] ipq40xx: add support for EnGenius EMR3500 SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (2 ports) USB: 1 x 2.0 (Host controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emr3500-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMR3500. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emr3500-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset Signed-off-by: Yen-Ting-Shen [squashed update patch, updated to 5.4, dropped BOARD_NAME, migrated to SOC] Signed-off-by: Christian Lamparter --- package/firmware/ipq-wifi/Makefile | 2 + .../ipq-wifi/board-engenius_emr3500.qca4019 | Bin 0 -> 24324 bytes .../ipq40xx/base-files/etc/board.d/02_network | 6 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 8 + .../arm/boot/dts/qcom-ipq4018-emr3500.dts | 235 ++++++++++++++++++ target/linux/ipq40xx/image/Makefile | 14 ++ .../901-arm-boot-add-dts-files.patch | 3 +- 7 files changed, 267 insertions(+), 1 deletion(-) create mode 100644 package/firmware/ipq-wifi/board-engenius_emr3500.qca4019 create mode 100644 target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index d70854f1a5..c86645e253 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -32,6 +32,7 @@ ALLWIFIBOARDS:= \ dlink_dap2610 \ engenius_eap2200 \ engenius_emd1 \ + engenius_emr3500 \ ezviz_cs-w3-wd1200g-eup \ linksys_ea8300 \ mobipromo_cm520-79f \ @@ -103,6 +104,7 @@ $(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW)) $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610)) $(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200)) $(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1)) +$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500)) $(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP)) $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300)) $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F)) diff --git a/package/firmware/ipq-wifi/board-engenius_emr3500.qca4019 b/package/firmware/ipq-wifi/board-engenius_emr3500.qca4019 new file mode 100644 index 0000000000000000000000000000000000000000..9f7ecfb7081d1a322061fb5506f7995dc6500e0f GIT binary patch literal 24324 zcmeHPdr(tX8b7?my0mgbKm@#m5FVirAW)4Od5M%q3YJzR=u)6+NotUX0Wox;ovMft z6)feEV5Av@K+}kftF407+Q*DC`^WyVvwyUmeROBGyS7ui)6VQJ?sspva1)XxXs8JH zgLBSzzI(oNzVo{$;U?$Dd2wrMOzO*-@o_mZX?dyn=}4haAdt#fB1b3*Qkk-5OKEvo zbeTdH^J=-QGDfy%OB`7%J5XA^hp5J{kFG7PmX%f<+_J6W`Mnh~WlhYs7xELHi;Ghz zT%ZpQ^v8*fK9x)*H@0m*2dp=&+nhF!gdTucU$b9djo##>qSSPEn2Y&`YD>gO=`&^W!$&;R z323Xx+O0cYh%@yA1`cVQ%GfM=Et&1<>FMF&;YJgLuFqqpzR(>#`9YnY=%YEJuLg0X z-ILI!vUQkPHdA65@z`+BiTb@oIa#8yOFixNilUdZ(#8xu$6BgoFJ`SD8v?CHmY?<9 z&mgxy<42&e_j_9E%Zjq#qN(R}y{u?^R?^rY(F|-Na5&LYS0u^WOgelX5rxJs_MC(f zUdY-w_5nD^Nr!&uq`W9c6baq6)mIkfi{hpnA}r&ZqgD?xM-$7-jDsZ}wrfiPCEGK5 zvaI?OrF9$kMid0)+-$FI%uonk@lCsKsOri%7Fq3I(lxZJYvVCajZbNROQ~{WS@=uq zvaX%3XxJu;-sPM0>0tf4dB+4b>t6kEsIKdU6ESr``$kWeA4=NGFTgf_1ntu0f?YmI z7y4zLnJv%O1(siZzxG^gV{oNU$&-Z=6D@^+hv!qjdU`eHp@vHwq? zA9x@lGFMku7b16agFnkFro?lgsW8s}^Eb8&aUL%ee#5vSA)(w5F1NsaB_bRd`9%>Z zEX>d4a)V*apMLt`yU9u72}r~b3pLyR^W7i6q1%Xt>%2T&-QE8S?N-ALoAJMY|K7Le zwhKLh%3*jOfk7%8TZf56j2BK59*@hxg9yXo(`;db;TV>Rr(*GVJXWbZ-1zqK*7iP1 z8J<%5hEeapl<199(oKnuk~T^@DPiF(0qYJ63%~;e0TOTA8}rB0@H9c%oir>P&lY4$ zQt%Wk6Bpt_f$)wH+k|ftY?8#`ahM3Fg6Pyv$787?O+O{Qw$;92O7ylH(5%xF9O#{% zqESz?_RS>}LQu}tlz!c|TgP0YnUT4g(yz~WX=r92+~=MT7KjH50wr7Vt@pNKIe3mB zN0NXi+)KbVF%rw8e!Tc+&P;(*e8w`hhbl@>^c zIX=3@tP^Xu^0;=Gp28kcXn$I4s|mjqJGw*QXuE}qbAkGm>@HW2-bDz?Lu%dVUF%X16CE8L z70Kh^i&KN(qM{HmX*`G2hr}Wm^y2}9&U#`lDTxS0uEdZS ziQP+9V93?ib=7Vty}ijzNTFDtz@WAB7c6HwaI}otD?CQSqU6Au2RAg5`9>pdp zgf~~+=oj|Ni10Ap<4oqAJM&(hd3R2-{pG^lC40)%r_Xk3bozl|)997!AK(7s?))#H zhk9&%lAI8^4=Q0bQ#+yL9;hU(nc4*<_dg}VW@-m?{vg`*So-KbNh@Iq#p=kOac)8J zzSfT3e&glw&+O?-2oj5_uqWAA5FR85lCV+wWI86nB?5^g9VJdCVq#n@5K9uB_W9ak zV23MyLO%>=We78{T-JKwdMt@m)J^=%?tuC`N0m>?N1XZc?l(BZyZ`uziwltM51l4i z;J!LQr3Cofo=u=2cg$G4tO&SGak& zPcz^Vy8K|ibo^D*e1976-Xd1Z9-YAVXS3OeNR;^b`5_`vGSB+cAe8IFmRz*Lj%x~A z$NnArhA+o&yI+%^X(mcL?XAuKFv};_cFVd(Gclpjd3jkoHkf9LNCD^w9?-dUHH8VnT|qv^lKM%i06t7!>(xPdslS#iW|Boc1NqPyQAbS z9tiVw^YC;|2uv>w0t^Dn4uKioye;1SzyJQ1ufO{04}gl9i%;@zkt{+i2VlQn{zI?^YG|e^t0p_@j&Evj%I6t+2Y-s z$<;u>pHZg2y}3qxD04_zSl&GqidZ}y45Lz@%nK4nzC$tp9|S!ohcb_|;5o5&>708) ze?;1Sn52;Svitg7%TE|HHCwM2y6wx6@w3`mRe?12%d6u(+6GmzR5X5B+o7tGW{ASZ zM~r&4N-h-z5&tW8?M6f-0*7|3Qnf=Wm@pa7s1L~Vr6S{~RwtKBb4AhPzty&>6w)*i zhj6%lGa>?!&E%>ARl&rEMvYo2e@VK*_@TN(UY(gP5`sg!YCq*Lb~A#HCaxKK)wR&? zbK@rCd+G+cR4O)(t9#@JGq*+hlOwz?-(?PI{3e7nan;zPeN(NFZyUd8?9;Y@bFT3t zb(g$0Gcz)9{EGG+GNfQ4q#L&)`3R{TC<86LbK$%y@4gKDeTU4R1 zt&yG|Id~zhJ+?VeIbzzU%|7$&ZvqdT(iODEALhtc=YBf4zb&OHOtH3DZQ5~8bSAig zC2t-q)(DT{N>yxW0LtanBn|=!8MP=XS7H%!;m6oo&qlvZtQm@QQ zL$ACedMjArTikDyol8H(QDP;7Lp56Q5pI>Ybo5+x>(+*7g5EE zzEv|vNgvK`XBEbBtIox{Cl8;QK6M7Z1)n;9X7Ok|5OY+FMw|;YKQtEmdbj4?Q+)ey zVAbe>O2qSm1gw}8;Nh>*^P7m2eRHNHx$~~>Q`~vvk`4^2sExd;#XfH)KG+uoUc5W- z;tM+mZZ8BcexWh8$G4~KkCSsxjJ>eD`#!zCpWI8LWyEPz{R0NWFwI7)#HnAyc0FdD z1!jH96LnJ8bZOTE&JOFa9-OShVN)8L7wmdGR^B~erMC{(0MhTo3vi +#include +#include + +/ { + model = "EnGenius EMR3500"; + compatible = "engenius,emr3500"; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2_hs_phy: hsphy@a8000 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds { + compatible = "gpio-leds"; + + power: white { + label = "emr3500:white:power"; + gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "emr3500:blue"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + + red { + label = "emr3500:red"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + }; + + orange { + label = "emr3500:orange"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio54", "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "0:MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "0:QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition@c0000 { + label = "0:CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition@e0000 { + label = "0:APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition@f0000 { + label = "0:APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition@170000 { + label = "0:ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + partition@180000 { + label = "userconfig"; + reg = <0x00180000 0x00080000>; + read-only; + }; + partition@200000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x200000 0x1e00000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + vlan_tag = <1 0x10>; +}; + +&gmac1 { + vlan_tag = <2 0x20>; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EMR3500"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EMR3500"; +}; diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 5e6bd1d1b7..1d9f20b85f 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -378,6 +378,20 @@ define Device/engenius_emd1 endef TARGET_DEVICES += engenius_emd1 +define Device/engenius_emr3500 + $(call Device/FitImage) + DEVICE_VENDOR := EnGenius + DEVICE_MODEL := EMR3500 + DEVICE_DTS_CONFIG := config@4 + SOC := qcom-ipq4018 + KERNEL_SIZE := 4096k + IMAGE_SIZE := 30720k + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata + IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size +endef +TARGET_DEVICES += engenius_emr3500 + define Device/engenius_ens620ext $(call Device/FitImage) DEVICE_VENDOR := EnGenius diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch index 5ce59979a0..371faa3a09 100644 --- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -837,11 +837,47 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -837,11 +837,48 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -21,6 +21,7 @@ Signed-off-by: John Crispin + qcom-ipq4018-ea6350v3.dtb \ + qcom-ipq4018-eap1300.dtb \ + qcom-ipq4018-emd1.dtb \ ++ qcom-ipq4018-emr3500.dtb \ + qcom-ipq4018-ens620ext.dtb \ + qcom-ipq4018-ex6100v2.dtb \ + qcom-ipq4018-ex6150v2.dtb \ -- 2.30.2