From 3f01b2914652a5f389ea95e7d1936dde6b66f73e Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Fri, 20 Sep 2024 18:55:32 +0100
Subject: [PATCH] generic: drop 6.1 support

Drop config and files for Linux 6.1.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 ...i-gen-LRU-rename-lru_gen_struct-to-l.patch |  352 -
 ...i-gen-LRU-remove-eviction-fairness-s.patch |  192 -
 ...i-gen-LRU-remove-aging-fairness-safe.patch |  294 -
 ...lti-gen-LRU-shuffle-should_run_aging.patch |  166 -
 ...i-gen-LRU-per-node-lru_gen_folio-lis.patch |  876 --
 ...i-gen-LRU-clarify-scan_control-flags.patch |  202 -
 ...i-gen-LRU-simplify-arch_has_hw_pte_y.patch |   38 -
 ...m-multi-gen-LRU-avoid-futile-retries.patch |   92 -
 ...3-10-UPSTREAM-mm-add-vma_has_recency.patch |  191 -
 ...STREAM-mm-support-POSIX_FADV_NOREUSE.patch |  129 -
 ...i-gen-LRU-section-for-working-set-pr.patch |   67 -
 ...i-gen-LRU-section-for-rmap-PT-walk-f.patch |   57 -
 ...ti-gen-LRU-section-for-Bloom-filters.patch |  243 -
 ...-multi-gen-LRU-section-for-memcg-LRU.patch |  427 -
 ...i-gen-LRU-improve-lru_gen_exit_memcg.patch |   40 -
 ...multi-gen-LRU-improve-walk_pmd_range.patch |  135 -
 ...i-gen-LRU-simplify-lru_gen_look_arou.patch |  148 -
 ...i-gen-LRU-remove-wait_event_killable.patch |  273 -
 ...0-v6.3-bitfield-add-FIELD_PREP_CONST.patch |   58 -
 ...-some-linker-warnings-in-recent-link.patch |   63 -
 ....h-removed-REPEAT_BYTE-from-kernel.h.patch |  161 -
 ...per_-_bits-and-lower_-_bits-to-wordp.patch |  107 -
 ...nand-Support-write-protection-settin.patch |   36 -
 ...y-a-bit-code-find-partition-matching.patch |   65 -
 ...find-OF-node-for-every-MTD-partition.patch |   84 -
 ...T_DEV-for-partitions-marked-as-rootf.patch |   47 -
 ...mtd-spi-nor-add-generic-flash-driver.patch |  117 -
 ...ilicon-Labs-SI3210-device-compatible.patch |   32 -
 ...TP-Link-SafeLoader-partitions-table-.patch |  229 -
 ...onix-use-scratch-buffer-for-DMA-oper.patch |   35 -
 ....3-mtd-ubi-wire-up-parent-MTD-device.patch |   33 -
 ...-mtd-ubi-block-wire-up-device-parent.patch |   49 -
 ...-mtd_otp_nvmem_add-to-handle-EPROBE_.patch |   47 -
 ...v6-ext-headers-without-frag0-invalid.patch |  107 -
 ...611-v6.3-net-add-helper-eth_addr_add.patch |   41 -
 ...uirk-for-Fiberstone-GPON-ONU-34-20BI.patch |   32 -
 ...-aquantia-move-to-separate-directory.patch | 2306 -----
 ...antia-move-MMD_VEND-define-to-header.patch |  183 -
 ...y-aquantia-add-firmware-load-support.patch |  504 --
 ...edicated-C45-API-to-MDIO-bus-drivers.patch |  326 -
 ...-Introduce-PSGMII-PHY-interface-mode.patch |  105 -
 ...eplace-of_gpio.h-with-what-indeed-is.patch |   32 -
 ...upport-qca8081-genphy_c45_pma_read_a.patch |   70 -
 ...3x-merge-qca8081-slave-seed-function.patch |   73 -
 ...nable-qca8081-slave-seed-conditional.patch |   76 -
 ...-at803x-support-qca8081-1G-chip-type.patch |   48 -
 ...emove-qca8081-1G-fast-retrain-and-sl.patch |   98 -
 ...dd-qca8081-fifo-reset-on-the-link-ch.patch |   55 -
 ...ove-disable-WOL-to-specific-at8031-p.patch |   69 -
 ...aname-hw_stats-functions-to-qca83xx-.patch |  129 -
 ...ove-qca83xx-specific-check-in-dedica.patch |  155 -
 ...ove-specific-DT-option-for-at8031-to.patch |   94 -
 ...ove-specific-at8031-probe-mode-check.patch |   78 -
 ...ove-specific-at8031-config_init-to-d.patch |   86 -
 ...ove-specific-at8031-WOL-bits-to-dedi.patch |   92 -
 ...ove-specific-at8031-config_intr-to-d.patch |   78 -
 ...ake-at8031-related-DT-functions-name.patch |   78 -
 ...ove-at8031-functions-in-dedicated-se.patch |  297 -
 ...ove-at8035-specific-DT-parse-to-dedi.patch |  114 -
 ...rop-specific-PHY-ID-check-from-cable.patch |  219 -
 ...ove-specific-qca808x-config_aneg-to-.patch |  116 -
 ...ake-read-specific-status-function-mo.patch |   97 -
 ...at803x-remove-extra-space-after-cast.patch |   27 -
 ...x-replace-msleep-1-with-usleep_range.patch |   38 -
 ...etter-align-function-varibles-to-ope.patch |  152 -
 ...generalize-cdt-fault-length-function.patch |   62 -
 ...efactor-qca808x-cable-test-get-statu.patch |  118 -
 ...dd-support-for-cdt-cross-short-test-.patch |  182 -
 ...at803x-make-read_status-more-generic.patch |   62 -
 ...y-at803x-add-LED-support-for-qca808x.patch |  408 -
 ...03x-PHY-driver-to-dedicated-director.patch | 5598 ------------
 ...ate-and-move-functions-to-shared-lib.patch |  243 -
 ...eatch-qca83xx-PHY-driver-from-at803x.patch |  638 --
 ...e-additional-functions-to-shared-lib.patch | 1014 ---
 ...etach-qca808x-PHY-driver-from-at803x.patch | 1936 ----
 ...cs-add-driver-for-MediaTek-SGMII-PCS.patch |  394 -
 ...r-type-u8-in-phy_package_shared-stru.patch |   28 -
 ...HY-package-API-to-support-multiple-g.patch |  341 -
 ...ure-__phy_write-read_mmd-to-helper-a.patch |  116 -
 ...pport-for-PHY-package-MMD-read-write.patch |  196 -
 ....2-net-fman-memac-Add-serdes-support.patch |  103 -
 ...2-net-fman-memac-Use-lynx-pcs-driver.patch |  384 -
 ...-03-v6.2-net-dpaa-Convert-to-phylink.patch | 2451 -----
 ...ide-phylink_validate_mask_caps-helpe.patch |   93 -
 ...valid-state-argument-to-phylink_vali.patch |   39 -
 ...add-phylink_get_link_timer_ns-helper.patch |   48 -
 ...cit-phylink_generic_validate-referen.patch |  250 -
 ..._bus_find_fwnode-take-a-const-fwnode.patch |   48 -
 ...-t-print-an_enabled-in-pcs_get_state.patch |   31 -
 ...e-Autoneg-bit-rather-than-an_enabled.patch |   32 -
 ...ort-validated-pause-and-autoneg-in-f.patch |   64 -
 ...2-v6.4-net-phylink-remove-an_enabled.patch |  177 -
 ...et-phylink-constify-fwnode-arguments.patch |   88 -
 ...-fwnode_get_phy_node-fwnode-argument.patch |   38 -
 ...ylink-fix-ksettings_set-ethtool-call.patch |   44 -
 ...-support-for-setting-signalling-rate.patch |  149 -
 ...hy-add-helpers-for-comparing-phy-IDs.patch |  147 -
 ...ire-supported_interfaces-to-be-fille.patch |   71 -
 ...ve-duplicated-linkmode-pause-resolut.patch |   64 -
 ...function-to-resolve-clause-73-negoti.patch |   76 -
 ...ide-phylink_pcs_config-and-phylink_p.patch |  100 -
 ...ually-fix-ksettings_set-ethtool-call.patch |   55 -
 ...net-phylink-add-PCS-negotiation-mode.patch |  324 -
 ...ert-phylink_mii_c22_pcs_config-to-ne.patch |   45 -
 ...-neg_mode-into-phylink_mii_c22_pcs_c.patch |  187 -
 ...xi-update-PCS-driver-to-use-neg_mode.patch |  101 -
 ...e-Autoneg-bit-rather-than-an_enabled.patch |   55 -
 ...s-fix-incorrect-number-of-interfaces.patch |   30 -
 ...808x-fix-logic-error-in-LED-brightne.patch |   36 -
 ...808x-default-to-LED-active-High-if-n.patch |   41 -
 ...ort-for-scanning-PHY-in-PHY-packages.patch |  211 -
 ...-add-devm-of_phy_package_join-helper.patch |  185 -
 ...move-more-function-to-shared-library.patch |  583 --
 ...whether-link-has-changed-in-c37_read.patch |  100 -
 ...m-add-support-for-QCA807x-PHY-Family.patch |  668 --
 ...e-common-qca808x-LED-define-to-share.patch |  179 -
 ...eneralize-some-qca808x-LED-functions.patch |  172 -
 ...07x-add-support-for-configurable-LED.patch |  326 -
 ...move-interface-mode-check-to-.config.patch |   51 -
 ...03x-fix-kernel-panic-with-at8031_pro.patch |   45 -
 ...-add-support-for-clock-frequency-pro.patch |  205 -
 ...-drop-wrong-endianness-conversion-fo.patch |   92 -
 ..._eth_soc-enable-flow-offloading-supp.patch |   26 -
 ...et-mtk_wed-introduce-wed-mcu-support.patch |  591 --
 ...net-mtk_wed-introduce-wed-wo-support.patch |  737 --
 ..._wed-rename-tx_wdma-array-in-rx_wdma.patch |   79 -
 ...mtk_wed-add-configure-wed-wo-support.patch | 1521 ----
 ...ethernet-mtk_wed-add-rx-mib-counters.patch |  149 -
 ..._eth_soc-remove-cpu_relax-in-mtk_pen.patch |   36 -
 ..._wed-add-wcid-overwritten-support-fo.patch |   80 -
 ..._wed-return-status-value-in-mtk_wdma.patch |   85 -
 ..._wed-move-MTK_WDMA_RESET_IDX_TX-conf.patch |   52 -
 ...ethernet-mtk_wed-update-mtk_wed_stop.patch |   98 -
 ...mtk_wed-add-mtk_wed_rx_reset-routine.patch |  309 -
 ..._wed-add-reset-to-tx_ring_setup-call.patch |  103 -
 ..._wed-fix-sleep-while-atomic-in-mtk_w.patch |  103 -
 ..._wed-get-rid-of-queue-lock-for-rx-qu.patch |   52 -
 ..._wed-get-rid-of-queue-lock-for-tx-qu.patch |   75 -
 ..._eth_soc-introduce-mtk_hw_reset-util.patch |   70 -
 ..._eth_soc-introduce-mtk_hw_warm_reset.patch |  107 -
 ..._eth_soc-align-reset-procedure-to-ve.patch |  262 -
 ..._eth_soc-add-dma-checks-to-mtk_hw_re.patch |  249 -
 ..._wed-add-reset-reset_complete-callba.patch |  124 -
 ..._wed-add-reset-to-rx_ring_setup-call.patch |  106 -
 ..._eth_soc-account-for-vlan-in-rx-head.patch |   22 -
 ..._eth_soc-increase-tx-ring-side-for-Q.patch |  143 -
 ..._eth_soc-avoid-port_mg-assignment-on.patch |   52 -
 ..._eth_soc-implement-multi-queue-suppo.patch |  654 --
 ...t-dsa-tag_mtk-assign-per-port-queues.patch |   20 -
 ...iatek-ppe-assign-per-port-queues-for.patch |   93 -
 ...ort-for-DSA-rx-offloading-via-metada.patch |   72 -
 ..._eth_soc-fix-VLAN-rx-hardware-accele.patch |  192 -
 ..._eth_soc-disable-hardware-DSA-untagg.patch |   42 -
 ..._eth_soc-enable-special-tag-when-any.patch |   54 -
 ..._eth_soc-fix-DSA-TX-tag-hwaccel-for-.patch |  129 -
 ..._wed-No-need-to-clear-memory-after-a.patch |   26 -
 ..._wed-fix-some-possible-NULL-pointer-.patch |   61 -
 ..._wed-fix-possible-deadlock-if-mtk_we.patch |   58 -
 ..._eth_soc-fix-tx-throughput-regressio.patch |   31 -
 ...-mtk_eth_soc-add-definitions-for-PCS.patch |   55 -
 ...eliminate-unnecessary-error-handling.patch |   74 -
 ...soc-add-pcs_get_state-implementation.patch |   46 -
 ...convert-mtk_sgmii-to-use-regmap_upda.patch |  130 -
 ...add-out-of-band-forcing-of-speed-and.patch |   52 -
 ...07-net-mtk_eth_soc-move-PHY-power-up.patch |   48 -
 ...h_soc-move-interface-speed-selection.patch |   48 -
 ...th_soc-add-advertisement-programming.patch |   52 -
 ...move-and-correct-link-timer-programm.patch |   63 -
 ...add-support-for-in-band-802.3z-negot.patch |  132 -
 ...ii-ensure-the-SGMII-PHY-is-powered-d.patch |  119 -
 ...iatek-sgmii-fix-duplex-configuration.patch |   52 -
 ...enable-PCS-polling-to-allow-SFP-work.patch |   33 -
 ...ethernet-mtk_eth_soc-reset-PCS-state.patch |   48 -
 ..._eth_soc-only-write-values-if-needed.patch |  103 -
 ...t-mtk_eth_soc-add-support-for-MT7981.patch |  206 -
 ..._eth_soc-set-MDIO-bus-clock-frequenc.patch |   76 -
 ..._eth_soc-switch-to-external-PCS-driv.patch |  512 --
 ...k_eth_soc-use-WO-firmware-for-MT7981.patch |   46 -
 ..._eth_soc-fix-NULL-pointer-dereferenc.patch |   28 -
 ..._eth_soc-ppe-add-support-for-flow-ac.patch |  403 -
 ...iatek-fix-ppe-flow-accounting-for-v1.patch |   58 -
 ..._eth_soc-drop-generic-vlan-rx-offloa.patch |  201 -
 ..._eth_soc-always-mtk_get_ib1_pkt_type.patch |   31 -
 ...net-phy-bcm54612e-add-suspend-resume.patch |   27 -
 ..._ppe-add-MTK_FOE_ENTRY_V-1-2-_SIZE-m.patch |   78 -
 ..._eth_soc-remove-incorrect-PLL-config.patch |  141 -
 ..._eth_soc-remove-mac_pcs_get_state-an.patch |   81 -
 ..._eth_soc-add-version-in-mtk_soc_data.patch |  550 --
 ...t-mtk_eth_soc-increase-MAX_DEVS-to-3.patch |   29 -
 ..._eth_soc-rely-on-MTK_MAX_DEVS-and-re.patch |  186 -
 ..._eth_soc-add-NETSYS_V3-version-suppo.patch |  307 -
 ..._eth_soc-convert-caps-in-mtk_soc_dat.patch |  193 -
 ..._eth_soc-convert-clock-bitmap-to-u64.patch |  132 -
 ..._eth_soc-add-basic-support-for-MT798.patch |  477 -
 ..._eth_soc-enable-page_pool-support-fo.patch |   27 -
 ..._eth_soc-enable-nft-hw-flowtable_off.patch |  135 -
 ..._eth_soc-support-per-flow-accounting.patch |   78 -
 ..._eth_soc-fix-NULL-pointer-on-hw-rese.patch |   52 -
 ..._eth_soc-fix-register-definitions-fo.patch |   44 -
 ...tk_eth_soc-add-reset-bits-for-MT7988.patch |  188 -
 ..._eth_soc-add-support-for-in-SoC-SRAM.patch |  254 -
 ..._eth_soc-support-36-bit-DMA-addressi.patch |  166 -
 ...k_eth_soc-fix-uninitialized-variable.patch |   44 -
 ..._eth_soc-fix-pse_port-configuration-.patch |   33 -
 ..._eth_soc-add-code-for-offloading-flo.patch |  271 -
 ...iatek-mtk_ppe-prefer-newly-added-l2-.patch |   37 -
 ..._eth_soc-improve-keeping-track-of-of.patch |  334 -
 ...iatek-fix-ppe-flow-accounting-for-L2.patch |  342 -
 ..._wed-add-some-more-info-in-wed_txinf.patch |   45 -
 ..._wed-minor-change-in-wed_-tx-rx-info.patch |   47 -
 ..._eth_soc-rely-on-mtk_pse_port-defini.patch |   29 -
 ..._wed-check-update_wo_rx_stats-in-mtk.patch |   26 -
 ..._wed-do-not-assume-offload-callbacks.patch |   68 -
 ..._wed-introduce-versioning-utility-ro.patch |  232 -
 ..._wed-do-not-configure-rx-offload-if-.patch |  234 -
 ..._wed-rename-mtk_rxbm_desc-in-mtk_wed.patch |   52 -
 ..._wed-introduce-mtk_wed_buf-structure.patch |   87 -
 ..._wed-move-mem_region-array-out-of-mt.patch |   88 -
 ...-mtk_wed-make-memory-region-optional.patch |   71 -
 ...k_wed-add-mtk_wed_soc_data-structure.patch |  217 -
 ..._wed-introduce-WED-support-for-MT798.patch | 1280 ---
 ..._wed-refactor-mtk_wed_check_wfdma_rx.patch |   95 -
 ..._wed-introduce-partial-AMSDU-offload.patch |  465 -
 ..._wed-introduce-hw_rro-support-for-MT.patch |  483 -
 ..._wed-debugfs-move-wed_v2-specific-re.patch |   78 -
 ..._wed-debugfs-add-WED-3.0-debugfs-ent.patch |  432 -
 ...et-mtk_wed-add-wed-3.0-reset-support.patch |  587 --
 ...antia-add-AQR111-and-AQR111B0-PHY-ID.patch |  102 -
 ...9-net-phy-aquantia-add-AQR113-PHY-ID.patch |   60 -
 ...9-net-phy-aquantia-add-AQR813-PHY-ID.patch |   59 -
 ...et-dsa-introduce-dsa_phylink_to_port.patch |   99 -
 ...A-switch-drivers-to-provide-their-ow.patch |  117 -
 ...t-introduce-napi_is_scheduled-helper.patch |   96 -
 ...et-stmmac-improve-TX-timer-arm-logic.patch |   77 -
 ...c-move-TX-timer-arm-after-DMA-enable.patch |   96 -
 ...ac-increase-TX-coalesce-timer-to-5ms.patch |   38 -
 ...ntroduce-single-mii-read-write-lo-hi.patch |  150 -
 ...prove-mdio-master-read-write-by-usin.patch |   73 -
 ...d-QCA8K_ATU_TABLE_SIZE-define-for-fd.patch |   63 -
 ...a8k-convert-to-regmap-read-write-API.patch |  261 -
 ...-enable-use_single_write-for-qca8xxx.patch |   78 -
 ...ke-learning-configurable-and-keep-of.patch |  146 -
 ...mit-user-ports-access-to-the-first-C.patch |   53 -
 ...ve-qca8xxx-hol-fixup-to-separate-fun.patch |  111 -
 ...e-dsa_for_each-macro-instead-of-for-.patch |  158 -
 ...x-regmap-bulk-read-write-methods-on-.patch |   61 -
 ...a-mt7530-remove-redundant-assignment.patch |   32 -
 ...t-dsa-mt7530-use-external-PCS-driver.patch |  477 -
 ...ake-some-noise-if-register-read-fail.patch |   32 -
 ...a-mt7530-refactor-SGMII-PCS-creation.patch |  111 -
 ...mt7530-use-unlocked-regmap-accessors.patch |   74 -
 ...se-regmap-to-access-switch-register-.patch |  224 -
 ...ove-SGMII-PCS-creation-to-mt7530_pro.patch |   54 -
 ...t-dsa-mt7530-introduce-mutex-helpers.patch |  273 -
 ...ove-p5_intf_modes-function-to-mt7530.patch |   75 -
 ...ntroduce-mt7530_probe_common-helper-.patch |  155 -
 ...ntroduce-mt7530_remove_common-helper.patch |   54 -
 ...t7530-introduce-separate-MDIO-driver.patch |  695 --
 ...kip-locking-if-MDIO-bus-isn-t-presen.patch |   47 -
 ...ntroduce-driver-for-MT7988-built-in-.patch |  421 -
 ...-dsa-mt7530-fix-support-for-MT7531BE.patch |  118 -
 ...30-update-PCS-driver-to-use-neg_mode.patch |   35 -
 ...onvert-to-platform-remove-callback-r.patch |   58 -
 ...3x-remove-mt753x_phylink_pcs_link_up.patch |   51 -
 ...eplace-deprecated-strncpy-with-ethto.patch |   40 -
 ...upport-OF-based-registration-of-swit.patch |  116 -
 ...-fix-10M-100M-speed-on-MT7988-switch.patch |   34 -
 ...lways-trap-frames-to-active-CPU-port.patch |  125 -
 ...se-p5_interface_select-as-data-type-.patch |   45 -
 ...tore-port-5-SGMII-capability-of-MT75.patch |  227 -
 ...mprove-comments-regarding-switch-por.patch |  133 -
 ...mprove-code-path-for-setting-up-port.patch |   95 -
 ...o-not-set-priv-p5_interface-on-mt753.patch |   42 -
 ...o-not-run-mt7530_setup_port5-if-port.patch |   62 -
 ...mpty-default-case-on-mt7530_setup_po.patch |   58 -
 ...7530-move-XTAL-check-to-mt7530_setup.patch |   53 -
 ...mt7530-simplify-mt7530_pad_clk_setup.patch |  146 -
 ...all-port-6-setup-from-mt7530_mac_con.patch |   97 -
 ...30-remove-pad_setup-function-pointer.patch |  148 -
 ...-correct-port-capabilities-of-MT7988.patch |   36 -
 ...o-not-clear-config-supported_interfa.patch |   38 -
 ...emove-.mac_port_config-for-MT7988-an.patch |   81 -
 ...et-interrupt-register-only-for-MT753.patch |   31 -
 ...o-not-use-SW_PHY_RST-to-reset-MT7531.patch |   41 -
 ...et-rid-of-useless-error-returns-on-p.patch |  217 -
 ...get-rid-of-priv-info-cpu_port_config.patch |  305 -
 ...-mt7530-get-rid-of-mt753x_mac_config.patch |   48 -
 ...ut-initialising-PCS-devices-code-bac.patch |   57 -
 ...ort-link-settings-ops-and-force-link.patch |   68 -
 ...-dsa-mt7530-simplify-link-operations.patch |   83 -
 ...0-provide-own-phylink-MAC-operations.patch |  135 -
 ...ix-port-mirroring-for-MT7988-SoC-swi.patch |   49 -
 ...dio-read-PHY-address-of-switch-from-.patch |  238 -
 ...-dsa-mt7530-simplify-core-operations.patch |  186 -
 ...isable-EEE-abilities-on-failure-on-M.patch |   88 -
 ...et-dsa-mt7530-refactor-MT7530_PMCR_P.patch |  200 -
 ...ename-p5_intf_sel-and-use-only-for-M.patch |  185 -
 ...ename-mt753x_bpdu_port_fw-enum-to-mt.patch |  169 -
 ...efactor-MT7530_MFC-and-MT7531_CFC-ad.patch |  201 -
 ...efactor-MT7530_HWTRAP-and-MT7530_MHW.patch |  257 -
 ...ove-MT753X_MTRAP-operations-for-MT75.patch |  117 -
 ...eturn-mt7530_setup_mdio-mt7531_setup.patch |   39 -
 ...efine-MAC-speed-capabilities-per-swi.patch |   75 -
 ...530-get-rid-of-function-sanity-check.patch |   33 -
 ...dsa-mt7530-refactor-MT7530_PMEEECR_P.patch |   71 -
 ...et-rid-of-mac_port_validate-member-o.patch |   46 -
 ...se-priv-ds-num_ports-instead-of-MT75.patch |   57 -
 ...o-not-pass-port-variable-to-mt7531_r.patch |   37 -
 ...xplain-exposing-MDIO-bus-of-MT7531AE.patch |   33 -
 ...0-do-not-set-MT7530_P5_DIS-when-PHY-.patch |   45 -
 ...etect-PHY-muxing-when-PHY-is-defined.patch |   45 -
 ...or-Motorcomm-yt8521-gigabit-ethernet.patch | 1724 ----
 ...fix-yt8521-duplicated-argument-to-or.patch |   49 -
 ...net-phy-add-Motorcomm-YT8531S-phy-id.patch |  140 -
 ...fix-the-spelling-problem-of-Sentinel.patch |   26 -
 ...nge-the-phy-id-of-yt8521-and-yt8531s.patch |   29 -
 ...-for-Motorcomm-yt8521-yt8531-gigabit.patch |  107 -
 ...support-for-Motorcomm-yt8521-gigabit.patch |  343 -
 ...upport-for-Motorcomm-yt8531s-gigabit.patch |  100 -
 ...or-Motorcomm-yt8531-gigabit-ethernet.patch |  302 -
 ...motorcomm-uninitialized-variables-in.patch |   34 -
 ...m-Add-pad-drive-strength-cfg-support.patch |  170 -
 ...k-add-pcs_enable-pcs_disable-methods.patch |  173 -
 ...t-pcs-lynxi-implement-pcs_disable-op.patch |   44 -
 ...ive-renaming-when-an-interface-is-up.patch |  136 -
 ...-need-to-blacklist-any-r8152-devices.patch |  158 -
 ...-control-transfer-of-rtl8152_get_ver.patch |   46 -
 ...-Add-__GFP_NOWARN-to-big-allocations.patch |   55 -
 ...52-adjust-generic_ocp_write-function.patch |   70 -
 .../795-v6.6-09-r8152-set-bp-in-bulk.patch    |  129 -
 ...eth-r8152-try-to-use-a-normal-budget.patch |   39 -
 ...re-register-access-if-register-acces.patch |  398 -
 ...he-loop-when-the-budget-is-exhausted.patch |   83 -
 ..._ether-add-u-blox-0x1313-composition.patch |   47 -
 ...795-v6.7-16-r8152-use-napi_gro_frags.patch |  122 -
 ...ix-risk-of-NULL-pointer-deallocation.patch |   30 -
 ...ansmit-URBs-without-trailing-padding.patch |   35 -
 ...03-usbnet-ipheth-add-CDC-NCM-support.patch |  326 -
 ...et-ipheth-update-Kconfig-description.patch |   36 -
 ...6xxx-fix-marvell-6350-switch-probing.patch |   89 -
 ...11h-Add-the-Airoha-EN8811H-PHY-drive.patch | 1140 ---
 ...phy-air_en8811h-fix-some-error-codes.patch |   47 -
 ...it_default_state_get-to-the-global-h.patch |   39 -
 ...a8k-move-qca8k_port_to_phy-to-header.patch |   67 -
 ...net-dsa-qca8k-add-LEDs-basic-support.patch |  435 -
 ...dsa-qca8k-add-LEDs-blink_set-support.patch |   74 -
 ...bs-for-when-CLASS_LED-NEW_LEDS-are-d.patch |   59 -
 ...5-net-phy-Add-a-binding-for-PHY-LEDs.patch |  191 -
 ...ce-Call-into-the-PHY-driver-to-set-L.patch |   97 -
 ...ell-Add-software-control-of-the-LEDs.patch |  112 -
 ...ce-Call-into-the-PHY-driver-to-set-L.patch |   73 -
 ...-phy-marvell-Implement-led_blink_set.patch |  104 -
 ...Fix-inconsistent-indenting-in-led_bl.patch |   38 -
 ...dev-Drop-NETDEV_LED_MODE_LINKUP-from.patch |   87 -
 ...dev-Rename-add-namespace-to-netdev-t.patch |  149 -
 ...-netdev-Convert-device-attr-to-macro.patch |   82 -
 ...etdev-Use-mutex-instead-of-spinlocks.patch |  106 -
 ...01-leds-add-APIs-for-LEDs-hw-control.patch |   74 -
 ...get-attached-device-for-LED-hw-contr.patch |   37 -
 ...ds-leds-class-Document-new-Hardware-.patch |  113 -
 ...dev-refactor-code-setting-device-nam.patch |   69 -
 ...dev-introduce-check-for-possible-hw-.patch |   54 -
 ...dev-add-basic-check-for-hw-control-s.patch |   42 -
 ...dev-reject-interval-store-for-hw_con.patch |   28 -
 ...etdev-add-support-for-LED-hw-control.patch |  107 -
 ...er-netdev-validate-configured-netdev.patch |   58 -
 ...dev-init-mode-if-hw-control-already-.patch |   53 -
 ...dev-expose-netdev-trigger-modes-in-l.patch |   54 -
 ...t-dsa-qca8k-implement-hw_control-ops.patch |  200 -
 ...dsa-qca8k-add-op-to-get-ports-netdev.patch |   70 -
 ...dev-add-additional-specific-link-spe.patch |  242 -
 ...dev-add-additional-specific-link-dup.patch |  138 -
 ...dev-expose-hw_control-status-via-sys.patch |   45 -
 ...d-support-for-additional-modes-for-n.patch |   64 -
 ...x-pass-directly-chip-structure-to-mv.patch |   64 -
 ...x-use-mv88e6xxx_phy_is_internal-in-m.patch |   31 -
 ...x-add-field-to-specify-internal-phys.patch |   69 -
 ...x-fix-88E6393X-family-internal-phys-.patch |   52 -
 ...x-pass-mv88e6xxx_chip-structure-to-p.patch |  110 -
 ...xx-enable-support-for-88E6361-switch.patch |  153 -
 ...e-STM32MP15_BSEC_NUM_LOWER-in-config.patch |   82 -
 ...-warning-when-upper-OTPs-are-updated.patch |   34 -
 ...nvmem-stm32-add-nvmem-type-attribute.patch |   26 -
 ...m-stm32-fix-spelling-typo-in-comment.patch |   27 -
 ...x-spelling-mistake-controlls-control.patch |   27 -
 ...boot-env-add-Broadcom-format-support.patch |   67 -
 ...mem-core-remove-spurious-white-space.patch |   26 -
 ...e-add-an-index-parameter-to-the-cell.patch |  180 -
 ...struct-nvmem_cell_info-to-nvmem-prov.patch |   78 -
 ...the-removal-of-the-cells-in-nvmem_ad.patch |   65 -
 ...05-nvmem-core-add-nvmem_add_one_cell.patch |  122 -
 ...vmem_add_one_cell-in-nvmem_add_cells.patch |   93 -
 ...32-add-OP-TEE-support-for-STM32MP13x.patch |  562 --
 ...ect-bsec-pta-presence-for-STM32MP15x.patch |   85 -
 ...eprm-fix-kernel-doc-bad-line-warning.patch |   32 -
 ...mi-sdam-register-at-device-init-time.patch |   43 -
 ...011-nvmem-stm32-fix-OPTEE-dependency.patch |   46 -
 ...ount-to-list.h-as-list_count_nodes-f.patch |   75 -
 ...001-nvmem-xilinx-zynqmp-make-modular.patch |   35 -
 ...2-nvmem-core-introduce-NVMEM-layouts.patch |  387 -
 ...ndle-the-absence-of-expected-layouts.patch |   61 -
 ...-core-request-layout-modules-loading.patch |   52 -
 ...em-core-add-per-cell-post-processing.patch |   86 -
 ...ow-to-modify-a-cell-before-adding-it.patch |   59 -
 ...replace-global-post-processing-with-.patch |   81 -
 ...m-cell-drop-global-cell_post_process.patch |   68 -
 ...de-own-priv-pointer-in-post-process-.patch |   76 -
 ...ayouts-sl28vpd-Add-new-layout-driver.patch |  215 -
 ...youts-onie-tlv-Add-new-layout-driver.patch |  306 -
 ...m-mark-OF-related-data-as-maybe-unus.patch |   32 -
 ...Support-postprocessing-for-GPU-speed.patch |  120 -
 ...p-Use-devm_platform_ioremap_resource.patch |   39 -
 ...tp-Use-devm_platform_ioremap_resourc.patch |   39 -
 ...p-Use-devm_platform_get_and_ioremap_.patch |   32 -
 ...rt-specifying-both-cell-raw-data-pos.patch |  115 -
 ...nv-post-process-ethaddr-env-variable.patch |   81 -
 ...cro-to-register-nvmem-layout-drivers.patch |   42 -
 ...28vpd-Use-module_nvmem_layout_driver.patch |   39 -
 ...ie-tlv-Use-module_nvmem_layout_drive.patch |   39 -
 ...uts-onie-tlv-Drop-wrong-module-alias.patch |   24 -
 ...28vpd-set-varaiable-sl28vpd_layout-s.patch |   31 -
 ...-bcm47xx-support-init-from-IO-memory.patch |  100 -
 ...set-varaiable-imx_ocotp_layout-stora.patch |   31 -
 ...Reverse-MAC-addresses-on-all-i.MX-de.patch |   71 -
 ...vram-add-.read_post_process-for-MACs.patch |   81 -
 ...tp-Add-clks-and-reg_read-to-rockchip.patch |  166 -
 ...tp-Generalize-rockchip_otp_wait_stat.patch |   62 -
 ...tp-Use-devm_reset_control_array_get_.patch |   31 -
 ...hip-otp-Improve-probe-error-handling.patch |   71 -
 ...-rockchip-otp-Add-support-for-RK3588.patch |  129 -
 ...-Switch-xilinx.com-emails-to-amd.com.patch |   26 -
 ...-0010-nvmem-imx-support-i.MX93-OCOTP.patch |  230 -
 ...e-add-support-for-fixed-cells-layout.patch |   96 -
 ...Convert-to-devm_platform_ioremap_res.patch |   36 -
 ...-Use-devm_platform_get_and_ioremap_r.patch |   30 -
 ...p-Convert-to-devm_platform_ioremap_r.patch |   34 -
 ...fuse-Convert-to-devm_platform_iorema.patch |   36 -
 ...fuse-Use-devm_platform_get_and_iorem.patch |   31 -
 ...m-Use-devm_platform_get_and_ioremap_.patch |   30 -
 ....6-0007-nvmem-qfprom-do-some-cleanup.patch |   59 -
 ...se-devm_platform_get_and_ioremap_res.patch |   29 -
 ...nvmem-add-new-NXP-QorIQ-eFuse-driver.patch |  133 -
 ...-nvmem-Kconfig-Fix-typo-drive-driver.patch |   37 -
 ...m-Add-Qualcomm-secure-QFPROM-support.patch |  152 -
 ...-Replace-zero-length-array-with-DECL.patch |   30 -
 ...e-all-cells-before-adding-the-nvmem-.patch |   40 -
 ...n-NULL-when-no-nvmem-layout-is-found.patch |   35 -
 ...-Do-not-open-code-existing-functions.patch |   29 -
 ...tify-when-a-new-layout-is-registered.patch |   44 -
 ...ia-Use-sysfs_emit-instead-of-sprintf.patch |   29 -
 ...a-Make-set_brightness-more-efficient.patch |  207 -
 ...a-Support-HW-controlled-mode-via-pri.patch |  202 -
 ...a-Add-support-for-enabling-disabling.patch |  244 -
 ...a-Fix-brightness-setting-and-trigger.patch |  167 -
 ...mem-qfprom-Mark-core-clk-as-optional.patch |   37 -
 ...it-config-option-to-read-old-syntax-.patch |  330 -
 ...0003-nvmem-Use-device_get_match_data.patch |   77 -
 ...4-Revert-nvmem-add-new-config-option.patch |   77 -
 ...ect-fixed-layouts-to-grab-a-layout-d.patch |   45 -
 ..._nvram-store-a-copy-of-NVRAM-content.patch |  261 -
 ...-Add-FUNCTION-defines-for-per-band-W.patch |   34 -
 ...-Add-LED_FUNCTION_WAN_ONLINE-for-Int.patch |   35 -
 ...-device-Export-of_device_make_bus_id.patch |  140 -
 ...mem_layout_get_container-in-another-.patch |   95 -
 ...Create-a-header-for-internal-sharing.patch |   91 -
 ...03-nvmem-Simplify-the-add_cells-hook.patch |   79 -
 ...vmem-Move-and-rename-fixup_cell_info.patch |  169 -
 ...rk-layouts-to-become-regular-devices.patch |  763 --
 ...vmem-core-Expose-cells-through-sysfs.patch |  240 -
 ...support-for-STM32MP25-BSEC-to-contro.patch |   65 -
 ...factor-.add_cells-callback-arguments.patch |   94 -
 ...mem-drop-nvmem_layout_get_match_data.patch |   72 -
 ...nvmem-core-add-nvmem_dev_size-helper.patch |   53 -
 ...-use-nvmem_add_one_cell-nvmem-subsys.patch |  126 -
 ...-u-boot-env-use-nvmem-device-helpers.patch |   81 -
 ...vmem-u-boot-env-improve-coding-style.patch |   62 -
 ...fix-circular-LEDS_CLASS-dependencies.patch |   65 -
 ...net-phy-Fix-reading-LED-reg-property.patch |   43 -
 ...emove-LEDs-to-ensure-correct-orderin.patch |   67 -
 ...Register-MediaTek-socinfo-driver-fro.patch |   69 -
 ...qmp_nvmem-zynqmp_nvmem_probe-cleanup.patch |   97 -
 ...mp_nvmem-Add-support-to-access-efuse.patch |  243 -
 ...mem-mtk-efuse-Drop-NVMEM-device-name.patch |   35 -
 ...rint-error-on-wrong-bits-DT-property.patch |   32 -
 ...dev-Remove-NULL-check-before-dev_-pu.patch |   44 -
 ...dev-uninitialized-variable-in-netdev.patch |   31 -
 ...netdev-Fix-requesting-offload-device.patch |   57 -
 ...ce-Call-into-the-PHY-driver-to-set-L.patch |  149 -
 ...Add-support-for-offloading-LED-blink.patch |  344 -
 ...-Disable-offload-on-deactivation-of-.patch |   31 -
 ...-of_parse_phandle_with_optional_args.patch |   58 -
 ...ke-.-cells-optional-for-simple-props.patch |   34 -
 ...operty-add-nvmem-cell-cells-property.patch |   30 -
 ...vice-Ignore-modalias-of-reused-nodes.patch |   37 -
 ...-ignore-error-code-in-of_device_ueve.patch |   29 -
 ...002-of-Update-of_device_get_modalias.patch |  103 -
 ...v6.4-0003-of-Rename-of_modalias_node.patch |  173 -
 ...0004-of-Move-of_modalias-to-module.c.patch |  160 -
 ...uest-module-helper-logic-to-module.c.patch |  131 -
 ...ore-owner-from-modules-with-nvmem_la.patch |   61 -
 ...ie-tlv-drop-driver-owner-initializat.patch |   28 -
 ...28vpd-drop-driver-owner-initializati.patch |   28 -
 ...-nvmem-sc27xx-fix-module-autoloading.patch |   26 -
 ...05-nvmem-sprd-fix-module-autoloading.patch |   26 -
 ...core-switch-to-use-device_add_groups.patch |   32 -
 ...prom-Convert-to-platform-remove-call.patch |   57 -
 ...fuse-Remove-nvmem_device-from-efuse-.patch |   50 -
 ...qcom-document-qcom-msm-id-and-qcom-b.patch |  207 -
 ...-move-SMEM-item-struct-and-defines-t.patch |  171 -
 ...com-smem-Switch-to-EXPORT_SYMBOL_GPL.patch |   55 -
 ...-smem-introduce-qcom_smem_get_soc_id.patch |   70 -
 ...com-nvmem-use-SoC-ID-s-from-bindings.patch |   51 -
 ...-nvmem-use-helper-to-get-SMEM-SoC-ID.patch |  109 -
 ...tc-rtc7301-Support-byte-addressed-IO.patch |   93 -
 ...t-phy-amd-Support-the-Altima-AMI101L.patch |   82 -
 ...ors-from-DT-bindings-to-led_co.patch.patch |   29 -
 ...igger-netdev-Extend-speeds-up-to-10G.patch |  111 -
 ...-support-for-PHY-LEDs-polarity-modes.patch |   98 -
 ...dev-fix-RTNL-handling-to-prevent-pot.patch |  170 -
 ....4-net-phy-hide-the-PHYLIB_LEDS-knob.patch |   43 -
 ...dev-Fix-kernel-panic-on-interface-re.patch |   55 -
 ...-clear-PMD-Global-Transmit-Disable-b.patch |  103 -
 ...dd-missing-MODULE_DESCRIPTION-macros.patch |   48 -
 ...e-Replacing-the-use-of-of_node_put-t.patch |   48 -
 ...tp-set-add_legacy_fixed_of_cells-con.patch |   28 -
 ...4-nvmem-rockchip-otp-Set-type-to-OTP.patch |   25 -
 ...nvmem-rockchip-efuse-set-type-to-OTP.patch |   26 -
 ...06-nvmem-core-add-single-sysfs-group.patch |   42 -
 ...core-remove-global-nvmem_cells_group.patch |   83 -
 ...unnecessary-range-checks-in-sysfs-ca.patch |   61 -
 ...em-Use-sysfs_emit-for-type-attribute.patch |   30 -
 ...e-Implement-force_ro-sysfs-attribute.patch |  122 -
 ...v-error-if-NVMEM-device-is-too-small.patch |   40 -
 ...-type-of-devm_nvmem_device_get-in-ke.patch |   37 -
 ...1-nvmem-imx-ocotp-ele-support-i.MX95.patch |   73 -
 ...otp-Use-devm_platform_ioremap_resour.patch |   44 -
 ...-nvmem-layouts-add-U-Boot-env-layout.patch |  525 --
 ..._generic-add-support-for-sc8280xp-cr.patch |   32 -
 ...ci_generic-Add-HP-variant-of-T99W175.patch |   34 -
 ..._generic-Add-definition-for-some-VID.patch |   66 -
 ..._generic-Drop-redundant-pci_enable_p.patch |   68 -
 ...-mhi-pci_generic-Add-Foxconn-T99W510.patch |   49 -
 ..._generic-Add-support-for-IP_SW0-chan.patch |   67 -
 ..._generic-Add-support-for-Quectel-EM1.patch |   34 -
 ..._generic-Add-support-for-Quectel-RM5.patch |   49 -
 ..._generic-Add-support-for-Dell-DW5932.patch |   34 -
 ..._generic-Add-support-for-Quectel-RM5.patch |   36 -
 ...-a-separate-timeout-parameter-for-wa.patch |  175 -
 ..._generic-Add-SDX75-based-modem-suppo.patch |   62 -
 ..._generic-constify-modem_telit_fn980_.patch |   28 -
 ...ow-MHI-client-drivers-to-provide-the.patch |  142 -
 ...ix-order-of-pek-rise-and-fall-events.patch |   80 -
 ...0x-Switch-to-the-sys-off-handler-API.patch |   82 -
 ...fd-axp20x-Fix-axp288-writable-ranges.patch |   28 -
 ...axp20x-Add-support-for-AXP15060-PMIC.patch |  343 -
 ...-axp20x-Add-support-for-AXP313a-PMIC.patch |  256 -
 ...p20x-Add-support-for-AXP313a-variant.patch |  129 -
 ...egulator-axp20x-Add-AXP15060-support.patch |  367 -
 ....5-mfd-axp20x-Add-support-for-AXP192.patch |  383 -
 ...-spinand-winbond-fix-flash-detection.patch |   40 -
 ...6.2-mtd-spinand-winbond-add-W25N02KV.patch |  106 -
 ...d-spinand-winbond-Fix-ecc_get_status.patch |   49 -
 ...8-net-ethtool-implement-ethtool_puts.patch |  139 -
 ...v6.8-net-phy-add-possible-interfaces.patch |   60 -
 ...6.8-net-phylink-use-for_each_set_bit.patch |   46 -
 ...k-split-out-per-interface-validation.patch |   76 -
 ...k-pass-PHY-into-phylink_validate_one.patch |   47 -
 ...-pass-PHY-into-phylink_validate_mask.patch |   58 -
 ...t-out-PHY-validation-from-phylink_br.patch |   95 -
 ...the-PHY-s-possible_interfaces-if-pop.patch |  130 -
 ...808x-add-helper-for-checking-for-1G-.patch |   50 -
 ...-qca808x-fill-in-possible_interfaces.patch |   44 -
 target/linux/generic/config-6.1               | 7955 -----------------
 .../generic/hack-6.1/204-module_strip.patch   |  210 -
 ...-abort-configuration-on-unset-symbol.patch |   41 -
 .../hack-6.1/210-darwin_scripts_include.patch | 3053 -------
 .../211-darwin-uuid-typedef-clash.patch       |   22 -
 .../hack-6.1/212-tools_portability.patch      |  360 -
 .../hack-6.1/214-spidev_h_portability.patch   |   24 -
 .../hack-6.1/220-arm-gc_sections.patch        |  123 -
 .../generic/hack-6.1/221-module_exports.patch |  126 -
 .../hack-6.1/230-openwrt_lzma_options.patch   |   38 -
 .../hack-6.1/250-netfilter_depends.patch      |   27 -
 .../linux/generic/hack-6.1/251-kconfig.patch  |  157 -
 .../generic/hack-6.1/253-ksmbd-config.patch   |   32 -
 .../generic/hack-6.1/259-regmap_dynamic.patch |  144 -
 .../260-crypto_test_dependencies.patch        |   52 -
 .../hack-6.1/261-lib-arc4-unhide.patch        |   24 -
 .../generic/hack-6.1/280-rfkill-stubs.patch   |   84 -
 ...cache-use-more-efficient-cache-blast.patch |   64 -
 ...rans-call-add-disks-after-mtd-device.patch |  112 -
 ...upport-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch |   24 -
 ...ers-add-nvmem-support-to-cmdlinepart.patch |  120 -
 .../hack-6.1/430-mtk-bmt-support.patch        |   33 -
 ...0-net-enable-fraglist-GRO-by-default.patch |   24 -
 ...lter-connmark-introduce-set-dscpmark.patch |  214 -
 ...-netfilter-add-xt_FLOWOFFLOAD-target.patch |  812 --
 .../hack-6.1/651-wireless_mesh_header.patch   |   24 -
 .../hack-6.1/660-fq_codel_defaults.patch      |   27 -
 ...t-size-the-hashtable-more-adequately.patch |   25 -
 .../700-swconfig_switch_drivers.patch         |  131 -
 ...-dsa-mv88e6xxx-disable-ATU-violation.patch |   21 -
 .../721-net-add-packet-mangeling.patch        |  167 -
 ...hy-aquantia-enable-AQR112-and-AQR412.patch |  148 -
 ...aquantia-fix-system-side-protocol-mi.patch |   34 -
 ...ntia-add-PHY_IDs-for-AQR112-variants.patch |   63 -
 ...mtk-lynxi-workaround-2500BaseX-no-an.patch |   53 -
 ...-r8152-add-LED-configuration-from-OF.patch |   74 -
 ...et-add-RTL8152-binding-documentation.patch |   54 -
 .../765-mxl-gpy-control-LED-reg-from-DT.patch |   98 -
 ...k-ge-add-LED-configuration-interface.patch |   72 -
 .../hack-6.1/773-bgmac-add-srab-switch.patch  |   98 -
 .../780-usb-net-MeigLink_modem_support.patch  |   69 -
 .../781-usb-net-rndis-support-asr.patch       |   69 -
 .../790-SFP-GE-T-ignore-TX_FAULT.patch        |   63 -
 .../800-GPIO-add-named-gpio-exports.patch     |  190 -
 .../810-bcma-ssb-fallback-sprom.patch         |  187 -
 .../hack-6.1/901-debloat_sock_diag.patch      |  174 -
 .../generic/hack-6.1/902-debloat_proc.patch   |  419 -
 .../hack-6.1/904-debloat_dma_buf.patch        |   93 -
 .../generic/hack-6.1/910-kobject_uevent.patch |   32 -
 .../911-kobject_add_broadcast_uevent.patch    |   76 -
 .../hack-6.1/920-device_tree_cmdline.patch    |   21 -
 ...vert-driver-core-Set-fw_devlink-on-b.patch |   30 -
 ...include-asm-rwonce.h-for-kernel-code.patch |   29 -
 ...s-negative-stack-offsets-on-stack-tr.patch |   57 -
 .../103-kbuild-export-SUBARCH.patch           |   21 -
 ..._wdt-Add-support-for-specifying-WDI-.patch |   75 -
 ...e_mem_map-with-ARCH_PFN_OFFSET-calcu.patch |   82 -
 ...ame2-and-add-RENAME_WHITEOUT-support.patch |   81 -
 ...41-jffs2-add-RENAME_EXCHANGE-support.patch |   73 -
 .../142-jffs2-add-splice-ops.patch            |   20 -
 ...ge_allow_receiption_on_disabled_port.patch |   45 -
 ...t-send-arp-replies-if-src-and-target.patch |   37 -
 ...-rs5c372-support_alarms_up_to_1_week.patch |   94 -
 ...he_alarm_to_be_used_as_wakeup_source.patch |   71 -
 .../203-kallsyms_uncompressed.patch           |  118 -
 .../205-backtrace_module_info.patch           |   41 -
 ...e-filenames-from-deps_initramfs-list.patch |   30 -
 ...able_wilink_platform_without_drivers.patch |   20 -
 .../270-platform-mikrotik-build-bits.patch    |   31 -
 .../300-mips_expose_boot_raw.patch            |   40 -
 ...rriers-between-dcache-icache-flushes.patch |   71 -
 .../302-mips_no_branch_likely.patch           |   22 -
 .../pending-6.1/305-mips_module_reloc.patch   |  370 -
 .../pending-6.1/308-mips32r2_tune.patch       |   22 -
 .../310-arm_module_unresolved_weak_sym.patch  |   22 -
 ...t-command-line-parameters-from-users.patch |  282 -
 .../332-arc-add-OWRTDTB-section.patch         |   84 -
 ...able-unaligned-access-in-kernel-mode.patch |   24 -
 ...ernel-XZ-compression-option-on-PPC_8.patch |   25 -
 ...el-fix-detect_memory_region-function.patch |   74 -
 ...ip-bcm-6345-l1-request-memory-region.patch |  113 -
 .../400-mtd-mtdsplit-support.patch            |  328 -
 ...er-NVMEM-devices-for-partitions-with.patch |   48 -
 ...support-for-minor-aligned-partitions.patch |  245 -
 .../pending-6.1/420-mtd-redboot_space.patch   |   41 -
 ...30-mtd-add-myloader-partition-parser.patch |  229 -
 ...check-for-bad-blocks-when-calculatin.patch |   68 -
 ...bcm47xxpart-detect-T_Meter-partition.patch |   37 -
 ...mtd-add-routerbootpart-parser-config.patch |   38 -
 ...dings-mtd-add-basic-bindings-for-UBI.patch |  121 -
 ...ubi-volume-allow-UBI-volumes-to-prov.patch |   48 -
 ...e-notifier-to-create-ubiblock-from-p.patch |  225 -
 ...0-04-mtd-ubi-attach-from-device-tree.patch |  264 -
 ...e-pre-removal-notification-for-UBI-v.patch |  226 -
 ...6-mtd-ubi-populate-ubi-volume-fwnode.patch |   65 -
 ...provide-NVMEM-layer-over-UBI-volumes.patch |  246 -
 ...k-add-basic-bindings-for-block-devic.patch |  120 -
 ...-09-block-partitions-populate-fwnode.patch |   77 -
 ...ck-add-new-genhd-flag-GENHD_FL_NVMEM.patch |   29 -
 ...50-11-block-implement-NVMEM-provider.patch |  235 -
 ...-mmc-mmc-card-add-block-device-nodes.patch |   74 -
 ...0-13-mmc-core-set-card-fwnode_handle.patch |   23 -
 ...mmc-block-set-fwnode-of-disk-devices.patch |   39 -
 .../450-15-mmc-block-set-GENHD_FL_NVMEM.patch |   22 -
 ...mtd-cfi_cmdset_0002-no-erase_suspend.patch |   25 -
 ...et_0002-add-buffer-write-cmd-timeout.patch |   17 -
 ...25p80-mx-disable-software-protection.patch |   18 -
 .../476-mtd-spi-nor-add-eon-en25q128.patch    |   19 -
 .../477-mtd-spi-nor-add-eon-en25qx128a.patch  |   21 -
 .../479-mtd-spi-nor-add-xtx-xt25f128b.patch   |   81 -
 ...r-add-support-for-Gigadevice-GD25D05.patch |   23 -
 .../482-mtd-spi-nor-add-gd25q512.patch        |   23 -
 .../484-mtd-spi-nor-add-esmt-f25l16pa.patch   |   24 -
 .../485-mtd-spi-nor-add-xmc-xm25qh128c.patch  |   25 -
 ...nand-add-support-for-ESMT-F50x1G41LB.patch |  143 -
 ...nd-Add-support-for-Etron-EM73D044VCx.patch |  168 -
 .../488-mtd-spi-nor-add-xmc-xm25qh64c.patch   |   23 -
 ...mtd-device-named-ubi-or-data-on-boot.patch |   98 -
 ...to-create-ubiblock-device-for-rootfs.patch |   77 -
 ...ting-ubi0-rootfs-in-init-do_mounts.c.patch |   53 -
 ...ROOT_DEV-to-ubiblock-rootfs-if-unset.patch |   34 -
 .../494-mtd-ubi-add-EOF-marker-support.patch  |   60 -
 ...-add-bindings-for-mtd-concat-devices.patch |   52 -
 ...cat-add-dt-driver-for-concat-devices.patch |  216 -
 ...i-nor-locking-support-for-MX25L6405D.patch |   32 -
 ...i-nor-disable-16-bit-sr-for-macronix.patch |   30 -
 .../500-fs_cdrom_dependencies.patch           |   52 -
 ...add-uImage.FIT-subimage-block-driver.patch |  733 --
 ...ass-device-lookup-for-dev-fit-rootfs.patch |   25 -
 .../530-jffs2_make_lzma_available.patch       | 5180 -----------
 .../pending-6.1/532-jffs2_eofdetect.patch     |   65 -
 .../600-netfilter_conntrack_flush.patch       |   90 -
 ...etfilter_match_bypass_default_checks.patch |  110 -
 ...netfilter_match_bypass_default_table.patch |  106 -
 ...netfilter_match_reduce_memory_access.patch |   22 -
 ...del-do-not-defer-queue-length-update.patch |   86 -
 .../pending-6.1/630-packet_socket_type.patch  |  138 -
 .../pending-6.1/655-increase_skb_pad.patch    |   20 -
 ...Add-support-for-MAP-E-FMRs-mesh-mode.patch |  511 --
 ...ng-with-source-address-failed-policy.patch |  263 -
 ...nes-for-_POLICY_FAILED-until-all-cod.patch |   50 -
 ...680-net-add-TCP-fraglist-GRO-support.patch |  627 --
 ...83-of_net-add-mac-address-to-of-tree.patch |   75 -
 ...ow_offload-handle-netdevice-events-f.patch |  110 -
 ...les-ignore-EOPNOTSUPP-on-flowtable-d.patch |   29 -
 ...net-mtk_eth_soc-enable-threaded-NAPI.patch |   21 -
 ...detach-callback-to-struct-phy_driver.patch |   38 -
 ...les-fix-bidirectional-offload-regres.patch |   24 -
 ...a-tag_mtk-add-padding-for-tx-packets.patch |   28 -
 ...d-knob-for-filtering-rx-tx-BPDU-pack.patch |  174 -
 ...-qca8k-implement-lag_fdb_add-del-ops.patch |   86 -
 ...a8k-enable-flooding-to-both-CPU-port.patch |   37 -
 ...k-add-support-for-port_change_master.patch |  158 -
 ...enable-assisted-learning-on-CPU-port.patch |   57 -
 ...pq8074-add-clock-frequency-to-MDIO-n.patch |   25 -
 ...rtl8221-allow-to-configure-SERDES-mo.patch |  106 -
 ...support-switching-between-SGMII-and-.patch |   61 -
 ...-use-genphy_soft_reset-for-2.5G-PHYs.patch |   65 -
 ...sable-SGMII-in-band-AN-for-2-5G-PHYs.patch |   43 -
 ...make-sure-paged-read-is-protected-by.patch |   35 -
 ...use-inline-functions-for-10GbE-adver.patch |   60 -
 ...check-validity-of-10GbE-link-partner.patch |   28 -
 ...-phy-realtek-introduce-rtl822x_probe.patch |   84 -
 ...tek-detect-early-version-of-RTL8221B.patch |   71 -
 ...0211_ptr-even-with-no-CFG82111-suppo.patch |   59 -
 ..._eth_soc-compile-out-netsys-v2-code-.patch |   44 -
 ..._eth_soc-work-around-issue-with-send.patch |   94 -
 ...rnet-mtk_eth_soc-set-NETIF_F_ALL_TSO.patch |   21 -
 ..._eth_soc-fix-remaining-throughput-re.patch |   42 -
 ..._eth_soc-ppe-fix-L2-offloading-with-.patch |   33 -
 ..._eth_soc-add-paths-and-SerDes-modes-.patch |  936 --
 ..._eth_soc-set-coherent-mask-to-get-PP.patch |   46 -
 ...y-mediatek-xfi-tphy-add-new-bindings.patch |  136 -
 ...hy-add-driver-for-MediaTek-XFI-T-PHY.patch |  498 --
 ...lynxi-add-platform-driver-for-MT7988.patch |  371 -
 ...pcs-add-bindings-for-MediaTek-USXGMI.patch |   81 -
 ...-add-driver-for-MediaTek-USXGMII-PCS.patch |  547 --
 ...et-phy-motorcomm-Add-missing-include.patch |   22 -
 ...ealtek-support-interrupt-of-RTL8221B.patch |   75 -
 ...11h-reset-netdev-rules-when-LED-is-s.patch |   45 -
 ...ional-threading-for-backlog-processi.patch |  227 -
 ...equest-assisted-learning-on-CPU-port.patch |   27 -
 ...a-b53-add-support-for-BCM63xx-RGMIIs.patch |  174 -
 ...-net-dsa-b53-mmap-add-more-63xx-SoCs.patch |  108 -
 ...dsa-b53-mmap-allow-passing-a-chip-ID.patch |  195 -
 ...b53-add-BCM63268-RGMII-configuration.patch |  123 -
 ...sa-b53-mdio-add-support-for-BCM53134.patch |  189 -
 ...-missing-linux-if_ether.h-for-ETH_AL.patch |   61 -
 ...-bus-mhi-core-add-SBL-state-callback.patch |   48 -
 ...ice-struct-copy-its-DMA-params-to-th.patch |   73 -
 ...pio-cascade-add-generic-GPIO-cascade.patch |  222 -
 ...e-old-opp-to-config_clks-on-_set_opp.patch |  108 -
 ...env-align-endianness-of-crc32-values.patch |   45 -
 ...-support-mac-base-fixed-layout-cells.patch |  124 -
 .../810-pci_disable_common_quirks.patch       |   62 -
 .../811-pci_disable_usb_common_quirks.patch   |  115 -
 ...problem-with-platfom-data-in-w1-gpio.patch |   26 -
 .../pending-6.1/834-ledtrig-libata.patch      |  149 -
 ...40-hwrng-bcm2835-set-quality-to-1000.patch |   26 -
 ...e-main-irq_chip-structure-a-static-d.patch |  102 -
 ...add-BCM63268-timer-clock-definitions.patch |  114 -
 ...add-BCM63268-timer-reset-definitions.patch |  107 -
 ...CM63268-timer-clock-and-reset-driver.patch |  345 -
 ...rack-busclk-state-to-avoid-bus-error.patch |   61 -
 ...-nxp-imx7d-pico-add-cpu-supply-nodes.patch |   43 -
 ...-add-LED_FUNCTION_MOBILE-for-mobile-.patch |   37 -
 ...-add-LED_FUNCTION_SPEED_-for-link-sp.patch |   37 -
 .../pending-6.1/920-mangle_bootargs.patch     |   71 -
 ...on-Fix-compilation-warning-for-wrong.patch |   51 -
 781 files changed, 124368 deletions(-)
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-01-UPSTREAM-mm-multi-gen-LRU-rename-lru_gen_struct-to-l.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-03-UPSTREAM-mm-multi-gen-LRU-remove-eviction-fairness-s.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-04-BACKPORT-mm-multi-gen-LRU-remove-aging-fairness-safe.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-05-UPSTREAM-mm-multi-gen-LRU-shuffle-should_run_aging.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-06-BACKPORT-mm-multi-gen-LRU-per-node-lru_gen_folio-lis.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-07-BACKPORT-mm-multi-gen-LRU-clarify-scan_control-flags.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-08-UPSTREAM-mm-multi-gen-LRU-simplify-arch_has_hw_pte_y.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-09-UPSTREAM-mm-multi-gen-LRU-avoid-futile-retries.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-10-UPSTREAM-mm-add-vma_has_recency.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-11-UPSTREAM-mm-support-POSIX_FADV_NOREUSE.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-12-UPSTREAM-mm-multi-gen-LRU-section-for-working-set-pr.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-13-UPSTREAM-mm-multi-gen-LRU-section-for-rmap-PT-walk-f.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-14-UPSTREAM-mm-multi-gen-LRU-section-for-Bloom-filters.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-15-UPSTREAM-mm-multi-gen-LRU-section-for-memcg-LRU.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-16-UPSTREAM-mm-multi-gen-LRU-improve-lru_gen_exit_memcg.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-17-UPSTREAM-mm-multi-gen-LRU-improve-walk_pmd_range.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.3-18-UPSTREAM-mm-multi-gen-LRU-simplify-lru_gen_look_arou.patch
 delete mode 100644 target/linux/generic/backport-6.1/020-v6.4-19-mm-Multi-gen-LRU-remove-wait_event_killable.patch
 delete mode 100644 target/linux/generic/backport-6.1/200-v6.3-bitfield-add-FIELD_PREP_CONST.patch
 delete mode 100644 target/linux/generic/backport-6.1/300-v6.2-powerpc-suppress-some-linker-warnings-in-recent-link.patch
 delete mode 100644 target/linux/generic/backport-6.1/301-v6.9-kernel.h-removed-REPEAT_BYTE-from-kernel.h.patch
 delete mode 100644 target/linux/generic/backport-6.1/302-v6.9-kernel.h-Move-upper_-_bits-and-lower_-_bits-to-wordp.patch
 delete mode 100644 target/linux/generic/backport-6.1/400-v6.9-mtd-rawnand-brcmnand-Support-write-protection-settin.patch
 delete mode 100644 target/linux/generic/backport-6.1/406-v6.2-0001-mtd-core-simplify-a-bit-code-find-partition-matching.patch
 delete mode 100644 target/linux/generic/backport-6.1/406-v6.2-0002-mtd-core-try-to-find-OF-node-for-every-MTD-partition.patch
 delete mode 100644 target/linux/generic/backport-6.1/408-v6.2-mtd-core-set-ROOT_DEV-for-partitions-marked-as-rootf.patch
 delete mode 100644 target/linux/generic/backport-6.1/410-v6.2-mtd-spi-nor-add-generic-flash-driver.patch
 delete mode 100644 target/linux/generic/backport-6.1/412-v6.3-02-spidev-Add-Silicon-Labs-SI3210-device-compatible.patch
 delete mode 100644 target/linux/generic/backport-6.1/421-v6.2-mtd-parsers-add-TP-Link-SafeLoader-partitions-table-.patch
 delete mode 100644 target/linux/generic/backport-6.1/423-v6.3-mtd-spinand-macronix-use-scratch-buffer-for-DMA-oper.patch
 delete mode 100644 target/linux/generic/backport-6.1/424-v6.3-mtd-ubi-wire-up-parent-MTD-device.patch
 delete mode 100644 target/linux/generic/backport-6.1/425-v6.3-mtd-ubi-block-wire-up-device-parent.patch
 delete mode 100644 target/linux/generic/backport-6.1/426-v6.4-0004-mtd-core-prepare-mtd_otp_nvmem_add-to-handle-EPROBE_.patch
 delete mode 100644 target/linux/generic/backport-6.1/600-v6.9-01-net-gro-parse-ipv6-ext-headers-without-frag0-invalid.patch
 delete mode 100644 target/linux/generic/backport-6.1/611-v6.3-net-add-helper-eth_addr_add.patch
 delete mode 100644 target/linux/generic/backport-6.1/701-net-next-net-sfp-add-quirk-for-Fiberstone-GPON-ONU-34-20BI.patch
 delete mode 100644 target/linux/generic/backport-6.1/702-01-v6.7-net-phy-aquantia-move-to-separate-directory.patch
 delete mode 100644 target/linux/generic/backport-6.1/702-02-v6.7-net-phy-aquantia-move-MMD_VEND-define-to-header.patch
 delete mode 100644 target/linux/generic/backport-6.1/702-03-v6.7-net-phy-aquantia-add-firmware-load-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/703-v6.3-net-mdio-Add-dedicated-C45-API-to-MDIO-bus-drivers.patch
 delete mode 100644 target/linux/generic/backport-6.1/704-v6.6-net-phy-Introduce-PSGMII-PHY-interface-mode.patch
 delete mode 100644 target/linux/generic/backport-6.1/705-v6.4-net-phy-at803x-Replace-of_gpio.h-with-what-indeed-is.patch
 delete mode 100644 target/linux/generic/backport-6.1/706-v6.6-01-net-phy-at803x-support-qca8081-genphy_c45_pma_read_a.patch
 delete mode 100644 target/linux/generic/backport-6.1/706-v6.6-02-net-phy-at803x-merge-qca8081-slave-seed-function.patch
 delete mode 100644 target/linux/generic/backport-6.1/706-v6.6-03-net-phy-at803x-enable-qca8081-slave-seed-conditional.patch
 delete mode 100644 target/linux/generic/backport-6.1/706-v6.6-04-net-phy-at803x-support-qca8081-1G-chip-type.patch
 delete mode 100644 target/linux/generic/backport-6.1/706-v6.6-05-net-phy-at803x-remove-qca8081-1G-fast-retrain-and-sl.patch
 delete mode 100644 target/linux/generic/backport-6.1/706-v6.6-06-net-phy-at803x-add-qca8081-fifo-reset-on-the-link-ch.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-02-net-phy-at803x-move-disable-WOL-to-specific-at8031-p.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-03-net-phy-at803x-raname-hw_stats-functions-to-qca83xx-.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-04-net-phy-at803x-move-qca83xx-specific-check-in-dedica.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-05-net-phy-at803x-move-specific-DT-option-for-at8031-to.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-06-net-phy-at803x-move-specific-at8031-probe-mode-check.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-08-net-phy-at803x-move-specific-at8031-WOL-bits-to-dedi.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-10-net-phy-at803x-make-at8031-related-DT-functions-name.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-11-net-phy-at803x-move-at8031-functions-in-dedicated-se.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-12-net-phy-at803x-move-at8035-specific-DT-parse-to-dedi.patch
 delete mode 100644 target/linux/generic/backport-6.1/707-v6.8-13-net-phy-at803x-drop-specific-PHY-ID-check-from-cable.patch
 delete mode 100644 target/linux/generic/backport-6.1/708-v6.8-01-net-phy-at803x-move-specific-qca808x-config_aneg-to-.patch
 delete mode 100644 target/linux/generic/backport-6.1/708-v6.8-02-net-phy-at803x-make-read-specific-status-function-mo.patch
 delete mode 100644 target/linux/generic/backport-6.1/709-v6.8-01-net-phy-at803x-remove-extra-space-after-cast.patch
 delete mode 100644 target/linux/generic/backport-6.1/709-v6.8-02-net-phy-at803x-replace-msleep-1-with-usleep_range.patch
 delete mode 100644 target/linux/generic/backport-6.1/710-v6.8-net-phy-at803x-better-align-function-varibles-to-ope.patch
 delete mode 100644 target/linux/generic/backport-6.1/711-v6.8-01-net-phy-at803x-generalize-cdt-fault-length-function.patch
 delete mode 100644 target/linux/generic/backport-6.1/711-v6.8-02-net-phy-at803x-refactor-qca808x-cable-test-get-statu.patch
 delete mode 100644 target/linux/generic/backport-6.1/711-v6.8-03-net-phy-at803x-add-support-for-cdt-cross-short-test-.patch
 delete mode 100644 target/linux/generic/backport-6.1/711-v6.8-04-net-phy-at803x-make-read_status-more-generic.patch
 delete mode 100644 target/linux/generic/backport-6.1/712-v6.9-net-phy-at803x-add-LED-support-for-qca808x.patch
 delete mode 100644 target/linux/generic/backport-6.1/713-v6.9-01-net-phy-move-at803x-PHY-driver-to-dedicated-director.patch
 delete mode 100644 target/linux/generic/backport-6.1/713-v6.9-02-net-phy-qcom-create-and-move-functions-to-shared-lib.patch
 delete mode 100644 target/linux/generic/backport-6.1/713-v6.9-03-net-phy-qcom-deatch-qca83xx-PHY-driver-from-at803x.patch
 delete mode 100644 target/linux/generic/backport-6.1/713-v6.9-04-net-phy-qcom-move-additional-functions-to-shared-lib.patch
 delete mode 100644 target/linux/generic/backport-6.1/713-v6.9-05-net-phy-qcom-detach-qca808x-PHY-driver-from-at803x.patch
 delete mode 100644 target/linux/generic/backport-6.1/714-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch
 delete mode 100644 target/linux/generic/backport-6.1/714-v6.8-01-net-phy-make-addr-type-u8-in-phy_package_shared-stru.patch
 delete mode 100644 target/linux/generic/backport-6.1/714-v6.8-02-net-phy-extend-PHY-package-API-to-support-multiple-g.patch
 delete mode 100644 target/linux/generic/backport-6.1/714-v6.8-03-net-phy-restructure-__phy_write-read_mmd-to-helper-a.patch
 delete mode 100644 target/linux/generic/backport-6.1/714-v6.8-04-net-phy-add-support-for-PHY-package-MMD-read-write.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-01-v6.2-net-fman-memac-Add-serdes-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-02-v6.2-net-fman-memac-Use-lynx-pcs-driver.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-03-v6.2-net-dpaa-Convert-to-phylink.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-04-v6.2-net-phylink-provide-phylink_validate_mask_caps-helpe.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-05-v6.2-phylink-require-valid-state-argument-to-phylink_vali.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-06-v6.2-net-phylink-add-phylink_get_link_timer_ns-helper.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-07-v6.2-net-remove-explicit-phylink_generic_validate-referen.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-08-net-sfp-make-sfp_bus_find_fwnode-take-a-const-fwnode.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-09-v6.4-net-pcs-lynx-don-t-print-an_enabled-in-pcs_get_state.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-10-v6.4-net-dpaa2-mac-use-Autoneg-bit-rather-than-an_enabled.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-11-v6.4-net-phylink-support-validated-pause-and-autoneg-in-f.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-12-v6.4-net-phylink-remove-an_enabled.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-13-v6.5-net-phylink-constify-fwnode-arguments.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-14-v6.3-net-phy-constify-fwnode_get_phy_node-fwnode-argument.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-15-v6.4-net-phylink-fix-ksettings_set-ethtool-call.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-16-v6.5-net-sfp-add-support-for-setting-signalling-rate.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-17-v6.5-net-phy-add-helpers-for-comparing-phy-IDs.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-18-v6.5-net-phylink-require-supported_interfaces-to-be-fille.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-19-v6.5-net-phylink-remove-duplicated-linkmode-pause-resolut.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-20-v6.5-net-phylink-add-function-to-resolve-clause-73-negoti.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-21-v6.5-net-phylink-provide-phylink_pcs_config-and-phylink_p.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-23-v6.4-net-phylink-actually-fix-ksettings_set-ethtool-call.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-24-v6.5-net-phylink-add-PCS-negotiation-mode.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-25-v6.5-net-phylink-convert-phylink_mii_c22_pcs_config-to-ne.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-26-v6.5-net-phylink-pass-neg_mode-into-phylink_mii_c22_pcs_c.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-27-v6.5-net-pcs-lynxi-update-PCS-driver-to-use-neg_mode.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-28-v6.4-net-pcs-xpcs-use-Autoneg-bit-rather-than-an_enabled.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-29-v6.4-net-pcs-xpcs-fix-incorrect-number-of-interfaces.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-v6.9-01-net-phy-qcom-qca808x-fix-logic-error-in-LED-brightne.patch
 delete mode 100644 target/linux/generic/backport-6.1/715-v6.9-02-net-phy-qcom-qca808x-default-to-LED-active-High-if-n.patch
 delete mode 100644 target/linux/generic/backport-6.1/716-v6.9-02-net-phy-add-support-for-scanning-PHY-in-PHY-packages.patch
 delete mode 100644 target/linux/generic/backport-6.1/716-v6.9-03-net-phy-add-devm-of_phy_package_join-helper.patch
 delete mode 100644 target/linux/generic/backport-6.1/716-v6.9-04-net-phy-qcom-move-more-function-to-shared-library.patch
 delete mode 100644 target/linux/generic/backport-6.1/716-v6.9-06-net-phy-provide-whether-link-has-changed-in-c37_read.patch
 delete mode 100644 target/linux/generic/backport-6.1/716-v6.9-07-net-phy-qcom-add-support-for-QCA807x-PHY-Family.patch
 delete mode 100644 target/linux/generic/backport-6.1/716-v6.9-08-net-phy-qcom-move-common-qca808x-LED-define-to-share.patch
 delete mode 100644 target/linux/generic/backport-6.1/716-v6.9-09-net-phy-qcom-generalize-some-qca808x-LED-functions.patch
 delete mode 100644 target/linux/generic/backport-6.1/716-v6.9-10-net-phy-qca807x-add-support-for-configurable-LED.patch
 delete mode 100644 target/linux/generic/backport-6.1/717-v6.9-net-phy-qca807x-move-interface-mode-check-to-.config.patch
 delete mode 100644 target/linux/generic/backport-6.1/718-v6.9-net-phy-qcom-at803x-fix-kernel-panic-with-at8031_pro.patch
 delete mode 100644 target/linux/generic/backport-6.1/720-v6.9-net-mdio-ipq4019-add-support-for-clock-frequency-pro.patch
 delete mode 100644 target/linux/generic/backport-6.1/721-v6.7-net-phy-aquantia-drop-wrong-endianness-conversion-fo.patch
 delete mode 100644 target/linux/generic/backport-6.1/724-v6.2-net-ethernet-mtk_eth_soc-enable-flow-offloading-supp.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-01-v6.1-net-ethernet-mtk_wed-introduce-wed-mcu-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-02-v6.1-net-ethernet-mtk_wed-introduce-wed-wo-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-03-v6.1-net-ethernet-mtk_wed-rename-tx_wdma-array-in-rx_wdma.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-04-v6.1-net-ethernet-mtk_wed-add-configure-wed-wo-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-05-v6.1-net-ethernet-mtk_wed-add-rx-mib-counters.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-07-v6.1-net-ethernet-mtk_eth_soc-remove-cpu_relax-in-mtk_pen.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-09-v6.2-net-ethernet-mtk_wed-add-wcid-overwritten-support-fo.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-10-v6.2-net-ethernet-mtk_wed-return-status-value-in-mtk_wdma.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-11-v6.2-net-ethernet-mtk_wed-move-MTK_WDMA_RESET_IDX_TX-conf.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-12-v6.2-net-ethernet-mtk_wed-update-mtk_wed_stop.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-13-v6.2-net-ethernet-mtk_wed-add-mtk_wed_rx_reset-routine.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-14-v6.2-net-ethernet-mtk_wed-add-reset-to-tx_ring_setup-call.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-15-v6.2-net-ethernet-mtk_wed-fix-sleep-while-atomic-in-mtk_w.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-16-v6.3-net-ethernet-mtk_wed-get-rid-of-queue-lock-for-rx-qu.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-17-v6.3-net-ethernet-mtk_wed-get-rid-of-queue-lock-for-tx-qu.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-18-v6.3-net-ethernet-mtk_eth_soc-introduce-mtk_hw_reset-util.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-19-v6.3-net-ethernet-mtk_eth_soc-introduce-mtk_hw_warm_reset.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-20-v6.3-net-ethernet-mtk_eth_soc-align-reset-procedure-to-ve.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-21-v6.3-net-ethernet-mtk_eth_soc-add-dma-checks-to-mtk_hw_re.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-22-v6.3-net-ethernet-mtk_wed-add-reset-reset_complete-callba.patch
 delete mode 100644 target/linux/generic/backport-6.1/729-23-v6.3-net-ethernet-mtk_wed-add-reset-to-rx_ring_setup-call.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-01-v6.3-net-ethernet-mtk_eth_soc-account-for-vlan-in-rx-head.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-02-v6.3-net-ethernet-mtk_eth_soc-increase-tx-ring-side-for-Q.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-03-v6.3-net-ethernet-mtk_eth_soc-avoid-port_mg-assignment-on.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-04-v6.3-net-ethernet-mtk_eth_soc-implement-multi-queue-suppo.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-05-v6.3-net-dsa-tag_mtk-assign-per-port-queues.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-06-v6.3-net-ethernet-mediatek-ppe-assign-per-port-queues-for.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-08-v6.3-net-dsa-add-support-for-DSA-rx-offloading-via-metada.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-09-v6.3-net-ethernet-mtk_eth_soc-fix-VLAN-rx-hardware-accele.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-12-v6.3-net-ethernet-mtk_eth_soc-disable-hardware-DSA-untagg.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-13-v6.3-net-ethernet-mtk_eth_soc-enable-special-tag-when-any.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-14-v6.3-net-ethernet-mtk_eth_soc-fix-DSA-TX-tag-hwaccel-for-.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-15-v6.3-net-ethernet-mtk_wed-No-need-to-clear-memory-after-a.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-16-v6.3-net-ethernet-mtk_wed-fix-some-possible-NULL-pointer-.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-17-v6.3-net-ethernet-mtk_wed-fix-possible-deadlock-if-mtk_we.patch
 delete mode 100644 target/linux/generic/backport-6.1/730-18-v6.3-net-ethernet-mtk_eth_soc-fix-tx-throughput-regressio.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-02-net-mtk_eth_soc-add-definitions-for-PCS.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-03-net-mtk_eth_soc-eliminate-unnecessary-error-handling.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-04-net-mtk_eth_soc-add-pcs_get_state-implementation.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-05-net-mtk_eth_soc-convert-mtk_sgmii-to-use-regmap_upda.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-06-net-mtk_eth_soc-add-out-of-band-forcing-of-speed-and.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-07-net-mtk_eth_soc-move-PHY-power-up.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-08-net-mtk_eth_soc-move-interface-speed-selection.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-09-net-mtk_eth_soc-add-advertisement-programming.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-10-net-mtk_eth_soc-move-and-correct-link-timer-programm.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-11-net-mtk_eth_soc-add-support-for-in-band-802.3z-negot.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-12-net-mediatek-sgmii-ensure-the-SGMII-PHY-is-powered-d.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-13-net-mediatek-sgmii-fix-duplex-configuration.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.2-14-mtk_sgmii-enable-PCS-polling-to-allow-SFP-work.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.3-15-net-ethernet-mtk_eth_soc-reset-PCS-state.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.3-16-net-ethernet-mtk_eth_soc-only-write-values-if-needed.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.3-18-net-ethernet-mtk_eth_soc-add-support-for-MT7981.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.3-19-net-ethernet-mtk_eth_soc-set-MDIO-bus-clock-frequenc.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.3-20-net-ethernet-mtk_eth_soc-switch-to-external-PCS-driv.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.4-21-net-mtk_eth_soc-use-WO-firmware-for-MT7981.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.4-22-net-ethernet-mtk_eth_soc-fix-NULL-pointer-dereferenc.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.4-23-net-ethernet-mtk_eth_soc-ppe-add-support-for-flow-ac.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.4-24-net-ethernet-mediatek-fix-ppe-flow-accounting-for-v1.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.4-25-net-ethernet-mtk_eth_soc-drop-generic-vlan-rx-offloa.patch
 delete mode 100644 target/linux/generic/backport-6.1/733-v6.5-26-net-ethernet-mtk_eth_soc-always-mtk_get_ib1_pkt_type.patch
 delete mode 100644 target/linux/generic/backport-6.1/734-v6.8-net-phy-bcm54612e-add-suspend-resume.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-01-net-ethernet-mtk_ppe-add-MTK_FOE_ENTRY_V-1-2-_SIZE-m.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-02-net-ethernet-mtk_eth_soc-remove-incorrect-PLL-config.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-03-net-ethernet-mtk_eth_soc-remove-mac_pcs_get_state-an.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-05-net-ethernet-mtk_eth_soc-add-version-in-mtk_soc_data.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-06-net-ethernet-mtk_eth_soc-increase-MAX_DEVS-to-3.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-07-net-ethernet-mtk_eth_soc-rely-on-MTK_MAX_DEVS-and-re.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-08-net-ethernet-mtk_eth_soc-add-NETSYS_V3-version-suppo.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-09-net-ethernet-mtk_eth_soc-convert-caps-in-mtk_soc_dat.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-10-net-ethernet-mtk_eth_soc-convert-clock-bitmap-to-u64.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-11-net-ethernet-mtk_eth_soc-add-basic-support-for-MT798.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-12-net-ethernet-mtk_eth_soc-enable-page_pool-support-fo.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-13-net-ethernet-mtk_eth_soc-enable-nft-hw-flowtable_off.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-14-net-ethernet-mtk_eth_soc-support-per-flow-accounting.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-15-net-ethernet-mtk_eth_soc-fix-NULL-pointer-on-hw-rese.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-16-net-ethernet-mtk_eth_soc-fix-register-definitions-fo.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-17-net-ethernet-mtk_eth_soc-add-reset-bits-for-MT7988.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-18-net-ethernet-mtk_eth_soc-add-support-for-in-SoC-SRAM.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-19-net-ethernet-mtk_eth_soc-support-36-bit-DMA-addressi.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-20-net-ethernet-mtk_eth_soc-fix-uninitialized-variable.patch
 delete mode 100644 target/linux/generic/backport-6.1/750-v6.5-21-net-ethernet-mtk_eth_soc-fix-pse_port-configuration-.patch
 delete mode 100644 target/linux/generic/backport-6.1/751-01-v6.4-net-ethernet-mtk_eth_soc-add-code-for-offloading-flo.patch
 delete mode 100644 target/linux/generic/backport-6.1/751-02-v6.4-net-ethernet-mediatek-mtk_ppe-prefer-newly-added-l2-.patch
 delete mode 100644 target/linux/generic/backport-6.1/751-03-v6.4-net-ethernet-mtk_eth_soc-improve-keeping-track-of-of.patch
 delete mode 100644 target/linux/generic/backport-6.1/751-04-v6.4-net-ethernet-mediatek-fix-ppe-flow-accounting-for-L2.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-01-v6.6-net-ethernet-mtk_wed-add-some-more-info-in-wed_txinf.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-02-v6.6-net-ethernet-mtk_wed-minor-change-in-wed_-tx-rx-info.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-03-v6.6-net-ethernet-mtk_eth_soc-rely-on-mtk_pse_port-defini.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-04-v6.6-net-ethernet-mtk_wed-check-update_wo_rx_stats-in-mtk.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-05-v6.7-net-ethernet-mtk_wed-do-not-assume-offload-callbacks.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-06-v6.7-net-ethernet-mtk_wed-introduce-versioning-utility-ro.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-07-v6.7-net-ethernet-mtk_wed-do-not-configure-rx-offload-if-.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-08-v6.7-net-ethernet-mtk_wed-rename-mtk_rxbm_desc-in-mtk_wed.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-09-v6.7-net-ethernet-mtk_wed-introduce-mtk_wed_buf-structure.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-10-v6.7-net-ethernet-mtk_wed-move-mem_region-array-out-of-mt.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-11-v6.7-net-ethernet-mtk_wed-make-memory-region-optional.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-13-v6.7-net-ethernet-mtk_wed-add-mtk_wed_soc_data-structure.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-14-v6.7-net-ethernet-mtk_wed-introduce-WED-support-for-MT798.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-15-v6.7-net-ethernet-mtk_wed-refactor-mtk_wed_check_wfdma_rx.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-16-v6.7-net-ethernet-mtk_wed-introduce-partial-AMSDU-offload.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-17-v6.7-net-ethernet-mtk_wed-introduce-hw_rro-support-for-MT.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-18-v6.7-net-ethernet-mtk_wed-debugfs-move-wed_v2-specific-re.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-19-v6.7-net-ethernet-mtk_wed-debugfs-add-WED-3.0-debugfs-ent.patch
 delete mode 100644 target/linux/generic/backport-6.1/752-20-v6.7-net-ethernet-mtk_wed-add-wed-3.0-reset-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/760-v6.9-net-phy-aquantia-add-AQR111-and-AQR111B0-PHY-ID.patch
 delete mode 100644 target/linux/generic/backport-6.1/761-v6.9-net-phy-aquantia-add-AQR113-PHY-ID.patch
 delete mode 100644 target/linux/generic/backport-6.1/762-v6.9-net-phy-aquantia-add-AQR813-PHY-ID.patch
 delete mode 100644 target/linux/generic/backport-6.1/765-v6.10-net-dsa-introduce-dsa_phylink_to_port.patch
 delete mode 100644 target/linux/generic/backport-6.1/766-v6.10-net-dsa-allow-DSA-switch-drivers-to-provide-their-ow.patch
 delete mode 100644 target/linux/generic/backport-6.1/770-net-introduce-napi_is_scheduled-helper.patch
 delete mode 100644 target/linux/generic/backport-6.1/771-v6.7-01-net-stmmac-improve-TX-timer-arm-logic.patch
 delete mode 100644 target/linux/generic/backport-6.1/771-v6.7-02-net-stmmac-move-TX-timer-arm-after-DMA-enable.patch
 delete mode 100644 target/linux/generic/backport-6.1/771-v6.7-03-net-stmmac-increase-TX-coalesce-timer-to-5ms.patch
 delete mode 100644 target/linux/generic/backport-6.1/777-v6.2-04-net-dsa-qca8k-introduce-single-mii-read-write-lo-hi.patch
 delete mode 100644 target/linux/generic/backport-6.1/777-v6.2-05-net-dsa-qca8k-improve-mdio-master-read-write-by-usin.patch
 delete mode 100644 target/linux/generic/backport-6.1/778-v6.3-01-net-dsa-qca8k-add-QCA8K_ATU_TABLE_SIZE-define-for-fd.patch
 delete mode 100644 target/linux/generic/backport-6.1/778-v6.3-02-net-dsa-qca8k-convert-to-regmap-read-write-API.patch
 delete mode 100644 target/linux/generic/backport-6.1/779-v6.5-net-dsa-qca8k-enable-use_single_write-for-qca8xxx.patch
 delete mode 100644 target/linux/generic/backport-6.1/780-v6.6-01-net-dsa-qca8k-make-learning-configurable-and-keep-of.patch
 delete mode 100644 target/linux/generic/backport-6.1/780-v6.6-02-net-dsa-qca8k-limit-user-ports-access-to-the-first-C.patch
 delete mode 100644 target/linux/generic/backport-6.1/780-v6.6-03-net-dsa-qca8k-move-qca8xxx-hol-fixup-to-separate-fun.patch
 delete mode 100644 target/linux/generic/backport-6.1/780-v6.6-04-net-dsa-qca8k-use-dsa_for_each-macro-instead-of-for-.patch
 delete mode 100644 target/linux/generic/backport-6.1/781-v6.6-01-net-dsa-qca8k-fix-regmap-bulk-read-write-methods-on-.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-01-v6.2-net-dsa-mt7530-remove-redundant-assignment.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-02-v6.4-net-dsa-mt7530-use-external-PCS-driver.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-03-v6.4-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-04-v6.4-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-05-v6.4-net-dsa-mt7530-use-unlocked-regmap-accessors.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-06-v6.4-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-07-v6.4-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-08-v6.4-net-dsa-mt7530-introduce-mutex-helpers.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-09-v6.4-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-10-v6.4-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-11-v6.4-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-12-v6.4-net-dsa-mt7530-introduce-separate-MDIO-driver.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-13-v6.4-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-14-v6.4-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-15-v6.4-net-dsa-mt7530-fix-support-for-MT7531BE.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-17-v6.5-net-dsa-mt7530-update-PCS-driver-to-use-neg_mode.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-18-v6.7-net-dsa-mt7530-Convert-to-platform-remove-callback-r.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-19-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-20-v6.7-net-dsa-mt7530-replace-deprecated-strncpy-with-ethto.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-21-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-22-v6.8-net-dsa-mt7530-fix-10M-100M-speed-on-MT7988-switch.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-23-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-24-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-25-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-26-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-27-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-28-v6.9-net-dsa-mt7530-do-not-set-priv-p5_interface-on-mt753.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-29-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-30-v6.9-net-dsa-mt7530-empty-default-case-on-mt7530_setup_po.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-31-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-32-v6.9-net-dsa-mt7530-simplify-mt7530_pad_clk_setup.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-33-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-34-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-35-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-36-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-37-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-38-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-39-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-40-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-41-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-42-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-43-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-44-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-45-v6.9-net-dsa-mt7530-simplify-link-operations.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-49-v6.10-net-dsa-mt7530-provide-own-phylink-MAC-operations.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-51-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-52-v6.10-net-dsa-mt7530-mdio-read-PHY-address-of-switch-from-.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-53-v6.10-net-dsa-mt7530-simplify-core-operations.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-54-v6.10-net-dsa-mt7530-disable-EEE-abilities-on-failure-on-M.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-55-v6.10-net-dsa-mt7530-refactor-MT7530_PMCR_P.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-56-v6.10-net-dsa-mt7530-rename-p5_intf_sel-and-use-only-for-M.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-57-v6.10-net-dsa-mt7530-rename-mt753x_bpdu_port_fw-enum-to-mt.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-58-v6.10-net-dsa-mt7530-refactor-MT7530_MFC-and-MT7531_CFC-ad.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-59-v6.10-net-dsa-mt7530-refactor-MT7530_HWTRAP-and-MT7530_MHW.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-60-v6.10-net-dsa-mt7530-move-MT753X_MTRAP-operations-for-MT75.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-61-v6.10-net-dsa-mt7530-return-mt7530_setup_mdio-mt7531_setup.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-62-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-63-v6.10-net-dsa-mt7530-get-rid-of-function-sanity-check.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-64-v6.10-net-dsa-mt7530-refactor-MT7530_PMEEECR_P.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-65-v6.10-net-dsa-mt7530-get-rid-of-mac_port_validate-member-o.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-66-v6.10-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-67-v6.10-net-dsa-mt7530-do-not-pass-port-variable-to-mt7531_r.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-68-v6.10-net-dsa-mt7530-explain-exposing-MDIO-bus-of-MT7531AE.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-69-v6.10-net-dsa-mt7530-do-not-set-MT7530_P5_DIS-when-PHY-.patch
 delete mode 100644 target/linux/generic/backport-6.1/790-70-v6.10-796-net-dsa-mt7530-detect-PHY-muxing-when-PHY-is-defined.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.2-02-net-phy-fix-yt8521-duplicated-argument-to-or.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.3-04-net-phy-fix-the-spelling-problem-of-Sentinel.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.3-05-net-phy-motorcomm-change-the-phy-id-of-yt8521-and-yt8531s.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.3-06-net-phy-Add-BIT-macro-for-Motorcomm-yt8521-yt8531-gigabit.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.3-07-net-phy-Add-dts-support-for-Motorcomm-yt8521-gigabit.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.3-10-net-phy-motorcomm-uninitialized-variables-in.patch
 delete mode 100644 target/linux/generic/backport-6.1/791-v6.6-11-net-phy-motorcomm-Add-pad-drive-strength-cfg-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/792-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch
 delete mode 100644 target/linux/generic/backport-6.1/793-v6.6-net-pcs-lynxi-implement-pcs_disable-op.patch
 delete mode 100644 target/linux/generic/backport-6.1/794-v6.2-net-core-Allow-live-renaming-when-an-interface-is-up.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.3-02-cdc_ether-no-need-to-blacklist-any-r8152-devices.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.3-05-r8152-reduce-the-control-transfer-of-rtl8152_get_ver.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.3-06-r8152-Add-__GFP_NOWARN-to-big-allocations.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.6-08-r8152-adjust-generic_ocp_write-function.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.6-09-r8152-set-bp-in-bulk.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.6-10-eth-r8152-try-to-use-a-normal-budget.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.6-13-r8152-Block-future-register-access-if-register-acces.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.6-14-r8152-break-the-loop-when-the-budget-is-exhausted.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.6-15-net-usb-cdc_ether-add-u-blox-0x1313-composition.patch
 delete mode 100644 target/linux/generic/backport-6.1/795-v6.7-16-r8152-use-napi_gro_frags.patch
 delete mode 100644 target/linux/generic/backport-6.1/796-v6.5-01-usbnet-ipheth-fix-risk-of-NULL-pointer-deallocation.patch
 delete mode 100644 target/linux/generic/backport-6.1/796-v6.5-02-usbnet-ipheth-transmit-URBs-without-trailing-padding.patch
 delete mode 100644 target/linux/generic/backport-6.1/796-v6.5-03-usbnet-ipheth-add-CDC-NCM-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/796-v6.5-04-usbnet-ipheth-update-Kconfig-description.patch
 delete mode 100644 target/linux/generic/backport-6.1/797-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch
 delete mode 100644 target/linux/generic/backport-6.1/798-v6.10-net-phy-air_en8811h-Add-the-Airoha-EN8811H-PHY-drive.patch
 delete mode 100644 target/linux/generic/backport-6.1/799-v6.10-net-phy-air_en8811h-fix-some-error-codes.patch
 delete mode 100644 target/linux/generic/backport-6.1/800-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch
 delete mode 100644 target/linux/generic/backport-6.1/801-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch
 delete mode 100644 target/linux/generic/backport-6.1/801-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/801-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/801-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch
 delete mode 100644 target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch
 delete mode 100644 target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch
 delete mode 100644 target/linux/generic/backport-6.1/801-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch
 delete mode 100644 target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch
 delete mode 100644 target/linux/generic/backport-6.1/801-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch
 delete mode 100644 target/linux/generic/backport-6.1/802-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch
 delete mode 100644 target/linux/generic/backport-6.1/803-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch
 delete mode 100644 target/linux/generic/backport-6.1/803-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch
 delete mode 100644 target/linux/generic/backport-6.1/803-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch
 delete mode 100644 target/linux/generic/backport-6.1/803-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch
 delete mode 100644 target/linux/generic/backport-6.1/804-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch
 delete mode 100644 target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch
 delete mode 100644 target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch
 delete mode 100644 target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch
 delete mode 100644 target/linux/generic/backport-6.1/806-v6.5-net-dsa-qca8k-add-support-for-additional-modes-for-n.patch
 delete mode 100644 target/linux/generic/backport-6.1/807-v6.5-01-net-dsa-mv88e6xxx-pass-directly-chip-structure-to-mv.patch
 delete mode 100644 target/linux/generic/backport-6.1/807-v6.5-02-net-dsa-mv88e6xxx-use-mv88e6xxx_phy_is_internal-in-m.patch
 delete mode 100644 target/linux/generic/backport-6.1/807-v6.5-03-net-dsa-mv88e6xxx-add-field-to-specify-internal-phys.patch
 delete mode 100644 target/linux/generic/backport-6.1/807-v6.5-04-net-dsa-mv88e6xxx-fix-88E6393X-family-internal-phys-.patch
 delete mode 100644 target/linux/generic/backport-6.1/807-v6.5-05-net-dsa-mv88e6xxx-pass-mv88e6xxx_chip-structure-to-p.patch
 delete mode 100644 target/linux/generic/backport-6.1/807-v6.5-06-net-dsa-mv88e6xxx-enable-support-for-88E6361-switch.patch
 delete mode 100644 target/linux/generic/backport-6.1/808-v6.2-0001-nvmem-stm32-move-STM32MP15_BSEC_NUM_LOWER-in-config.patch
 delete mode 100644 target/linux/generic/backport-6.1/808-v6.2-0002-nvmem-stm32-add-warning-when-upper-OTPs-are-updated.patch
 delete mode 100644 target/linux/generic/backport-6.1/808-v6.2-0003-nvmem-stm32-add-nvmem-type-attribute.patch
 delete mode 100644 target/linux/generic/backport-6.1/808-v6.2-0004-nvmem-stm32-fix-spelling-typo-in-comment.patch
 delete mode 100644 target/linux/generic/backport-6.1/808-v6.2-0005-nvmem-Kconfig-Fix-spelling-mistake-controlls-control.patch
 delete mode 100644 target/linux/generic/backport-6.1/808-v6.2-0006-nvmem-u-boot-env-add-Broadcom-format-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0001-nvmem-core-remove-spurious-white-space.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0002-nvmem-core-add-an-index-parameter-to-the-cell.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0003-nvmem-core-move-struct-nvmem_cell_info-to-nvmem-prov.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0004-nvmem-core-drop-the-removal-of-the-cells-in-nvmem_ad.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0005-nvmem-core-add-nvmem_add_one_cell.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0006-nvmem-core-use-nvmem_add_one_cell-in-nvmem_add_cells.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0007-nvmem-stm32-add-OP-TEE-support-for-STM32MP13x.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0008-nvmem-stm32-detect-bsec-pta-presence-for-STM32MP15x.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0009-nvmem-rave-sp-eeprm-fix-kernel-doc-bad-line-warning.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0010-nvmem-qcom-spmi-sdam-register-at-device-init-time.patch
 delete mode 100644 target/linux/generic/backport-6.1/809-v6.3-0011-nvmem-stm32-fix-OPTEE-dependency.patch
 delete mode 100644 target/linux/generic/backport-6.1/810-v6.3-i915-Move-list_count-to-list.h-as-list_count_nodes-f.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0001-nvmem-xilinx-zynqmp-make-modular.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0002-nvmem-core-introduce-NVMEM-layouts.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0003-nvmem-core-handle-the-absence-of-expected-layouts.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0004-nvmem-core-request-layout-modules-loading.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0005-nvmem-core-add-per-cell-post-processing.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0006-nvmem-core-allow-to-modify-a-cell-before-adding-it.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0007-nvmem-imx-ocotp-replace-global-post-processing-with-.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0008-nvmem-cell-drop-global-cell_post_process.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0009-nvmem-core-provide-own-priv-pointer-in-post-process-.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0010-nvmem-layouts-sl28vpd-Add-new-layout-driver.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0011-nvmem-layouts-onie-tlv-Add-new-layout-driver.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0012-nvmem-stm32-romem-mark-OF-related-data-as-maybe-unus.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0013-nvmem-mtk-efuse-Support-postprocessing-for-GPU-speed.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0014-nvmem-bcm-ocotp-Use-devm_platform_ioremap_resource.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0015-nvmem-nintendo-otp-Use-devm_platform_ioremap_resourc.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0016-nvmem-vf610-ocotp-Use-devm_platform_get_and_ioremap_.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0017-nvmem-core-support-specifying-both-cell-raw-data-pos.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0018-nvmem-u-boot-env-post-process-ethaddr-env-variable.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0019-nvmem-Add-macro-to-register-nvmem-layout-drivers.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0020-nvmem-layouts-sl28vpd-Use-module_nvmem_layout_driver.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0021-nvmem-layouts-onie-tlv-Use-module_nvmem_layout_drive.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0022-nvmem-layouts-onie-tlv-Drop-wrong-module-alias.patch
 delete mode 100644 target/linux/generic/backport-6.1/811-v6.4-0023-nvmem-layouts-sl28vpd-set-varaiable-sl28vpd_layout-s.patch
 delete mode 100644 target/linux/generic/backport-6.1/812-v6.2-firmware-nvram-bcm47xx-support-init-from-IO-memory.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0001-nvmem-imx-ocotp-set-varaiable-imx_ocotp_layout-stora.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0002-nvmem-imx-ocotp-Reverse-MAC-addresses-on-all-i.MX-de.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0003-nvmem-brcm_nvram-add-.read_post_process-for-MACs.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0004-nvmem-rockchip-otp-Add-clks-and-reg_read-to-rockchip.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0005-nvmem-rockchip-otp-Generalize-rockchip_otp_wait_stat.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0006-nvmem-rockchip-otp-Use-devm_reset_control_array_get_.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0007-nvmem-rockchip-otp-Improve-probe-error-handling.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0008-nvmem-rockchip-otp-Add-support-for-RK3588.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0009-nvmem-zynqmp-Switch-xilinx.com-emails-to-amd.com.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0010-nvmem-imx-support-i.MX93-OCOTP.patch
 delete mode 100644 target/linux/generic/backport-6.1/813-v6.5-0011-nvmem-core-add-support-for-fixed-cells-layout.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0001-nvmem-sunxi_sid-Convert-to-devm_platform_ioremap_res.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0002-nvmem-brcm_nvram-Use-devm_platform_get_and_ioremap_r.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0003-nvmem-lpc18xx_otp-Convert-to-devm_platform_ioremap_r.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0004-nvmem-meson-mx-efuse-Convert-to-devm_platform_iorema.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0005-nvmem-rockchip-efuse-Use-devm_platform_get_and_iorem.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0006-nvmem-stm32-romem-Use-devm_platform_get_and_ioremap_.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0007-nvmem-qfprom-do-some-cleanup.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0008-nvmem-uniphier-Use-devm_platform_get_and_ioremap_res.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0009-nvmem-add-new-NXP-QorIQ-eFuse-driver.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0011-nvmem-Kconfig-Fix-typo-drive-driver.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0012-nvmem-sec-qfprom-Add-Qualcomm-secure-QFPROM-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0013-nvmem-u-boot-env-Replace-zero-length-array-with-DECL.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0014-nvmem-core-Create-all-cells-before-adding-the-nvmem-.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0015-nvmem-core-Return-NULL-when-no-nvmem-layout-is-found.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0016-nvmem-core-Do-not-open-code-existing-functions.patch
 delete mode 100644 target/linux/generic/backport-6.1/814-v6.6-0017-nvmem-core-Notify-when-a-new-layout-is-registered.patch
 delete mode 100644 target/linux/generic/backport-6.1/815-v6.6-1-leds-turris-omnia-Use-sysfs_emit-instead-of-sprintf.patch
 delete mode 100644 target/linux/generic/backport-6.1/815-v6.7-2-leds-turris-omnia-Make-set_brightness-more-efficient.patch
 delete mode 100644 target/linux/generic/backport-6.1/815-v6.7-3-leds-turris-omnia-Support-HW-controlled-mode-via-pri.patch
 delete mode 100644 target/linux/generic/backport-6.1/815-v6.7-4-leds-turris-omnia-Add-support-for-enabling-disabling.patch
 delete mode 100644 target/linux/generic/backport-6.1/815-v6.7-5-leds-turris-omnia-Fix-brightness-setting-and-trigger.patch
 delete mode 100644 target/linux/generic/backport-6.1/816-v6.7-0001-nvmem-qfprom-Mark-core-clk-as-optional.patch
 delete mode 100644 target/linux/generic/backport-6.1/816-v6.7-0002-nvmem-add-explicit-config-option-to-read-old-syntax-.patch
 delete mode 100644 target/linux/generic/backport-6.1/816-v6.7-0003-nvmem-Use-device_get_match_data.patch
 delete mode 100644 target/linux/generic/backport-6.1/816-v6.7-0004-Revert-nvmem-add-new-config-option.patch
 delete mode 100644 target/linux/generic/backport-6.1/816-v6.7-0005-nvmem-Do-not-expect-fixed-layouts-to-grab-a-layout-d.patch
 delete mode 100644 target/linux/generic/backport-6.1/816-v6.7-0006-nvmem-brcm_nvram-store-a-copy-of-NVRAM-content.patch
 delete mode 100644 target/linux/generic/backport-6.1/817-v6.9-0001-dt-bindings-leds-Add-FUNCTION-defines-for-per-band-W.patch
 delete mode 100644 target/linux/generic/backport-6.1/817-v6.9-0002-dt-bindings-leds-Add-LED_FUNCTION_WAN_ONLINE-for-Int.patch
 delete mode 100644 target/linux/generic/backport-6.1/818-v6.8-of-device-Export-of_device_make_bus_id.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0001-nvmem-Move-of_nvmem_layout_get_container-in-another-.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0002-nvmem-Create-a-header-for-internal-sharing.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0003-nvmem-Simplify-the-add_cells-hook.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0004-nvmem-Move-and-rename-fixup_cell_info.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0005-nvmem-core-Rework-layouts-to-become-regular-devices.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0006-nvmem-core-Expose-cells-through-sysfs.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0007-nvmem-stm32-add-support-for-STM32MP25-BSEC-to-contro.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0008-nvmem-layouts-refactor-.add_cells-callback-arguments.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0009-nvmem-drop-nvmem_layout_get_match_data.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0010-nvmem-core-add-nvmem_dev_size-helper.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0011-nvmem-u-boot-env-use-nvmem_add_one_cell-nvmem-subsys.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0012-nvmem-u-boot-env-use-nvmem-device-helpers.patch
 delete mode 100644 target/linux/generic/backport-6.1/819-v6.8-0013-nvmem-u-boot-env-improve-coding-style.patch
 delete mode 100644 target/linux/generic/backport-6.1/820-v6.4-net-phy-fix-circular-LEDS_CLASS-dependencies.patch
 delete mode 100644 target/linux/generic/backport-6.1/821-v6.4-net-phy-Fix-reading-LED-reg-property.patch
 delete mode 100644 target/linux/generic/backport-6.1/822-v6.4-net-phy-Manual-remove-LEDs-to-ensure-correct-orderin.patch
 delete mode 100644 target/linux/generic/backport-6.1/823-v6.9-0002-nvmem-mtk-efuse-Register-MediaTek-socinfo-driver-fro.patch
 delete mode 100644 target/linux/generic/backport-6.1/823-v6.9-0003-nvmem-zynqmp_nvmem-zynqmp_nvmem_probe-cleanup.patch
 delete mode 100644 target/linux/generic/backport-6.1/823-v6.9-0004-nvmem-zynqmp_nvmem-Add-support-to-access-efuse.patch
 delete mode 100644 target/linux/generic/backport-6.1/823-v6.9-0005-nvmem-mtk-efuse-Drop-NVMEM-device-name.patch
 delete mode 100644 target/linux/generic/backport-6.1/823-v6.9-0007-nvmem-core-Print-error-on-wrong-bits-DT-property.patch
 delete mode 100644 target/linux/generic/backport-6.1/824-v6.5-leds-trigger-netdev-Remove-NULL-check-before-dev_-pu.patch
 delete mode 100644 target/linux/generic/backport-6.1/825-v6.5-leds-trigger-netdev-uninitialized-variable-in-netdev.patch
 delete mode 100644 target/linux/generic/backport-6.1/826-v6.6-01-led-trig-netdev-Fix-requesting-offload-device.patch
 delete mode 100644 target/linux/generic/backport-6.1/826-v6.6-02-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch
 delete mode 100644 target/linux/generic/backport-6.1/826-v6.6-03-net-phy-marvell-Add-support-for-offloading-LED-blink.patch
 delete mode 100644 target/linux/generic/backport-6.1/826-v6.6-04-leds-trig-netdev-Disable-offload-on-deactivation-of-.patch
 delete mode 100644 target/linux/generic/backport-6.1/827-v6.3-0001-of-base-add-of_parse_phandle_with_optional_args.patch
 delete mode 100644 target/linux/generic/backport-6.1/827-v6.3-0002-of-property-make-.-cells-optional-for-simple-props.patch
 delete mode 100644 target/linux/generic/backport-6.1/827-v6.3-0003-of-property-add-nvmem-cell-cells-property.patch
 delete mode 100644 target/linux/generic/backport-6.1/827-v6.3-0004-of-device-Ignore-modalias-of-reused-nodes.patch
 delete mode 100644 target/linux/generic/backport-6.1/827-v6.3-0005-of-device-Do-not-ignore-error-code-in-of_device_ueve.patch
 delete mode 100644 target/linux/generic/backport-6.1/828-v6.4-0002-of-Update-of_device_get_modalias.patch
 delete mode 100644 target/linux/generic/backport-6.1/828-v6.4-0003-of-Rename-of_modalias_node.patch
 delete mode 100644 target/linux/generic/backport-6.1/828-v6.4-0004-of-Move-of_modalias-to-module.c.patch
 delete mode 100644 target/linux/generic/backport-6.1/828-v6.4-0005-of-Move-the-request-module-helper-logic-to-module.c.patch
 delete mode 100644 target/linux/generic/backport-6.1/829-v6.10-0001-nvmem-layouts-store-owner-from-modules-with-nvmem_la.patch
 delete mode 100644 target/linux/generic/backport-6.1/829-v6.10-0002-nvmem-layouts-onie-tlv-drop-driver-owner-initializat.patch
 delete mode 100644 target/linux/generic/backport-6.1/829-v6.10-0003-nvmem-layouts-sl28vpd-drop-driver-owner-initializati.patch
 delete mode 100644 target/linux/generic/backport-6.1/829-v6.10-0004-nvmem-sc27xx-fix-module-autoloading.patch
 delete mode 100644 target/linux/generic/backport-6.1/829-v6.10-0005-nvmem-sprd-fix-module-autoloading.patch
 delete mode 100644 target/linux/generic/backport-6.1/829-v6.10-0006-nvmem-core-switch-to-use-device_add_groups.patch
 delete mode 100644 target/linux/generic/backport-6.1/829-v6.10-0007-nvmem-lpc18xx_eeprom-Convert-to-platform-remove-call.patch
 delete mode 100644 target/linux/generic/backport-6.1/829-v6.10-0008-nvmem-meson-mx-efuse-Remove-nvmem_device-from-efuse-.patch
 delete mode 100644 target/linux/generic/backport-6.1/830-00-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch
 delete mode 100644 target/linux/generic/backport-6.1/830-01-v6.5-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch
 delete mode 100644 target/linux/generic/backport-6.1/830-02-v6.5-soc-qcom-smem-Switch-to-EXPORT_SYMBOL_GPL.patch
 delete mode 100644 target/linux/generic/backport-6.1/830-03-v6.5-soc-qcom-smem-introduce-qcom_smem_get_soc_id.patch
 delete mode 100644 target/linux/generic/backport-6.1/830-04-v6.5-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch
 delete mode 100644 target/linux/generic/backport-6.1/830-05-v6.5-cpufreq-qcom-nvmem-use-helper-to-get-SMEM-SoC-ID.patch
 delete mode 100644 target/linux/generic/backport-6.1/831-v6.7-rtc-rtc7301-Support-byte-addressed-IO.patch
 delete mode 100644 target/linux/generic/backport-6.1/832-v6.7-net-phy-amd-Support-the-Altima-AMI101L.patch
 delete mode 100644 target/linux/generic/backport-6.1/833-v6.8-leds-core-Add-more-colors-from-DT-bindings-to-led_co.patch.patch
 delete mode 100644 target/linux/generic/backport-6.1/834-v6.8-leds-trigger-netdev-Extend-speeds-up-to-10G.patch
 delete mode 100644 target/linux/generic/backport-6.1/835-v6.9-net-phy-add-support-for-PHY-LEDs-polarity-modes.patch
 delete mode 100644 target/linux/generic/backport-6.1/836-v6.7-leds-trigger-netdev-fix-RTNL-handling-to-prevent-pot.patch
 delete mode 100644 target/linux/generic/backport-6.1/837-v6.4-net-phy-hide-the-PHYLIB_LEDS-knob.patch
 delete mode 100644 target/linux/generic/backport-6.1/838-v6.9-leds-trigger-netdev-Fix-kernel-panic-on-interface-re.patch
 delete mode 100644 target/linux/generic/backport-6.1/839-v6.9-net-phy-aquantia-clear-PMD-Global-Transmit-Disable-b.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0001-nvmem-add-missing-MODULE_DESCRIPTION-macros.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0002-nvmem-meson-efuse-Replacing-the-use-of-of_node_put-t.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0003-nvmem-rockchip-otp-set-add_legacy_fixed_of_cells-con.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0004-nvmem-rockchip-otp-Set-type-to-OTP.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0005-nvmem-rockchip-efuse-set-type-to-OTP.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0006-nvmem-core-add-single-sysfs-group.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0007-nvmem-core-remove-global-nvmem_cells_group.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0008-nvmem-core-drop-unnecessary-range-checks-in-sysfs-ca.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0009-nvmem-Use-sysfs_emit-for-type-attribute.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0010-nvmem-core-Implement-force_ro-sysfs-attribute.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0011-nvmem-u-boot-env-error-if-NVMEM-device-is-too-small.patch
 delete mode 100644 target/linux/generic/backport-6.1/840-v6.11-0012-nvmem-Fix-return-type-of-devm_nvmem_device_get-in-ke.patch
 delete mode 100644 target/linux/generic/backport-6.1/841-v6.12-0001-nvmem-imx-ocotp-ele-support-i.MX95.patch
 delete mode 100644 target/linux/generic/backport-6.1/841-v6.12-0002-nvmem-sunplus-ocotp-Use-devm_platform_ioremap_resour.patch
 delete mode 100644 target/linux/generic/backport-6.1/841-v6.12-0003-nvmem-layouts-add-U-Boot-env-layout.patch
 delete mode 100644 target/linux/generic/backport-6.1/850-v6.2-bus-mhi-host-pci_generic-add-support-for-sc8280xp-cr.patch
 delete mode 100644 target/linux/generic/backport-6.1/851-v6.2-bus-mhi-host-pci_generic-Add-HP-variant-of-T99W175.patch
 delete mode 100644 target/linux/generic/backport-6.1/852-v6.2-bus-mhi-host-pci_generic-Add-definition-for-some-VID.patch
 delete mode 100644 target/linux/generic/backport-6.1/853-v6.2-bus-mhi-host-pci_generic-Drop-redundant-pci_enable_p.patch
 delete mode 100644 target/linux/generic/backport-6.1/854-v6.4-bus-mhi-pci_generic-Add-Foxconn-T99W510.patch
 delete mode 100644 target/linux/generic/backport-6.1/855-v6.6-bus-mhi-host-pci_generic-Add-support-for-IP_SW0-chan.patch
 delete mode 100644 target/linux/generic/backport-6.1/856-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-EM1.patch
 delete mode 100644 target/linux/generic/backport-6.1/857-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-RM5.patch
 delete mode 100644 target/linux/generic/backport-6.1/858-v6.6-bus-mhi-host-pci_generic-Add-support-for-Dell-DW5932.patch
 delete mode 100644 target/linux/generic/backport-6.1/859-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-RM5.patch
 delete mode 100644 target/linux/generic/backport-6.1/861-v6.8-bus-mhi-host-Add-a-separate-timeout-parameter-for-wa.patch
 delete mode 100644 target/linux/generic/backport-6.1/862-v6.8-bus-mhi-host-pci_generic-Add-SDX75-based-modem-suppo.patch
 delete mode 100644 target/linux/generic/backport-6.1/863-stable-bus-mhi-host-pci_generic-constify-modem_telit_fn980_.patch
 delete mode 100644 target/linux/generic/backport-6.1/864-v6.6-bus-mhi-host-allow-MHI-client-drivers-to-provide-the.patch
 delete mode 100644 target/linux/generic/backport-6.1/880-v6.3-mfd-axp20x-Fix-order-of-pek-rise-and-fall-events.patch
 delete mode 100644 target/linux/generic/backport-6.1/881-v6.3-mfd-axp20x-Switch-to-the-sys-off-handler-API.patch
 delete mode 100644 target/linux/generic/backport-6.1/882-v6.3-mfd-axp20x-Fix-axp288-writable-ranges.patch
 delete mode 100644 target/linux/generic/backport-6.1/883-v6.4-mfd-axp20x-Add-support-for-AXP15060-PMIC.patch
 delete mode 100644 target/linux/generic/backport-6.1/884-v6.5-mfd-axp20x-Add-support-for-AXP313a-PMIC.patch
 delete mode 100644 target/linux/generic/backport-6.1/885-v6.5-regulator-axp20x-Add-support-for-AXP313a-variant.patch
 delete mode 100644 target/linux/generic/backport-6.1/886-v6.5-regulator-axp20x-Add-AXP15060-support.patch
 delete mode 100644 target/linux/generic/backport-6.1/887-v6.5-mfd-axp20x-Add-support-for-AXP192.patch
 delete mode 100644 target/linux/generic/backport-6.1/890-v6.2-mtd-spinand-winbond-fix-flash-detection.patch
 delete mode 100644 target/linux/generic/backport-6.1/891-v6.2-mtd-spinand-winbond-add-W25N02KV.patch
 delete mode 100644 target/linux/generic/backport-6.1/892-v6.5-mtd-spinand-winbond-Fix-ecc_get_status.patch
 delete mode 100644 target/linux/generic/backport-6.1/894-v6.8-net-ethtool-implement-ethtool_puts.patch
 delete mode 100644 target/linux/generic/backport-6.1/895-01-v6.8-net-phy-add-possible-interfaces.patch
 delete mode 100644 target/linux/generic/backport-6.1/895-02-v6.8-net-phylink-use-for_each_set_bit.patch
 delete mode 100644 target/linux/generic/backport-6.1/895-03-v6.8-net-phylink-split-out-per-interface-validation.patch
 delete mode 100644 target/linux/generic/backport-6.1/895-04-v6.8-net-phylink-pass-PHY-into-phylink_validate_one.patch
 delete mode 100644 target/linux/generic/backport-6.1/895-05-v6.8-net-phylink-pass-PHY-into-phylink_validate_mask.patch
 delete mode 100644 target/linux/generic/backport-6.1/895-06-v6.8-net-phylink-split-out-PHY-validation-from-phylink_br.patch
 delete mode 100644 target/linux/generic/backport-6.1/895-07-v6.8-net-phylink-use-the-PHY-s-possible_interfaces-if-pop.patch
 delete mode 100644 target/linux/generic/backport-6.1/897-01-v6.9-net-phy-qcom-qca808x-add-helper-for-checking-for-1G-.patch
 delete mode 100644 target/linux/generic/backport-6.1/897-02-v6.9-net-phy-qcom-qca808x-fill-in-possible_interfaces.patch
 delete mode 100644 target/linux/generic/config-6.1
 delete mode 100644 target/linux/generic/hack-6.1/204-module_strip.patch
 delete mode 100644 target/linux/generic/hack-6.1/205-kconfig-abort-configuration-on-unset-symbol.patch
 delete mode 100644 target/linux/generic/hack-6.1/210-darwin_scripts_include.patch
 delete mode 100644 target/linux/generic/hack-6.1/211-darwin-uuid-typedef-clash.patch
 delete mode 100644 target/linux/generic/hack-6.1/212-tools_portability.patch
 delete mode 100644 target/linux/generic/hack-6.1/214-spidev_h_portability.patch
 delete mode 100644 target/linux/generic/hack-6.1/220-arm-gc_sections.patch
 delete mode 100644 target/linux/generic/hack-6.1/221-module_exports.patch
 delete mode 100644 target/linux/generic/hack-6.1/230-openwrt_lzma_options.patch
 delete mode 100644 target/linux/generic/hack-6.1/250-netfilter_depends.patch
 delete mode 100644 target/linux/generic/hack-6.1/251-kconfig.patch
 delete mode 100644 target/linux/generic/hack-6.1/253-ksmbd-config.patch
 delete mode 100644 target/linux/generic/hack-6.1/259-regmap_dynamic.patch
 delete mode 100644 target/linux/generic/hack-6.1/260-crypto_test_dependencies.patch
 delete mode 100644 target/linux/generic/hack-6.1/261-lib-arc4-unhide.patch
 delete mode 100644 target/linux/generic/hack-6.1/280-rfkill-stubs.patch
 delete mode 100644 target/linux/generic/hack-6.1/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
 delete mode 100644 target/linux/generic/hack-6.1/402-mtd-blktrans-call-add-disks-after-mtd-device.patch
 delete mode 100644 target/linux/generic/hack-6.1/420-mtd-support-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch
 delete mode 100644 target/linux/generic/hack-6.1/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch
 delete mode 100644 target/linux/generic/hack-6.1/430-mtk-bmt-support.patch
 delete mode 100644 target/linux/generic/hack-6.1/600-net-enable-fraglist-GRO-by-default.patch
 delete mode 100644 target/linux/generic/hack-6.1/645-netfilter-connmark-introduce-set-dscpmark.patch
 delete mode 100644 target/linux/generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch
 delete mode 100644 target/linux/generic/hack-6.1/651-wireless_mesh_header.patch
 delete mode 100644 target/linux/generic/hack-6.1/660-fq_codel_defaults.patch
 delete mode 100644 target/linux/generic/hack-6.1/661-kernel-ct-size-the-hashtable-more-adequately.patch
 delete mode 100644 target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch
 delete mode 100644 target/linux/generic/hack-6.1/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch
 delete mode 100644 target/linux/generic/hack-6.1/721-net-add-packet-mangeling.patch
 delete mode 100644 target/linux/generic/hack-6.1/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch
 delete mode 100644 target/linux/generic/hack-6.1/723-net-phy-aquantia-fix-system-side-protocol-mi.patch
 delete mode 100644 target/linux/generic/hack-6.1/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch
 delete mode 100644 target/linux/generic/hack-6.1/750-net-pcs-mtk-lynxi-workaround-2500BaseX-no-an.patch
 delete mode 100644 target/linux/generic/hack-6.1/760-net-usb-r8152-add-LED-configuration-from-OF.patch
 delete mode 100644 target/linux/generic/hack-6.1/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
 delete mode 100644 target/linux/generic/hack-6.1/765-mxl-gpy-control-LED-reg-from-DT.patch
 delete mode 100644 target/linux/generic/hack-6.1/766-net-phy-mediatek-ge-add-LED-configuration-interface.patch
 delete mode 100644 target/linux/generic/hack-6.1/773-bgmac-add-srab-switch.patch
 delete mode 100644 target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch
 delete mode 100644 target/linux/generic/hack-6.1/781-usb-net-rndis-support-asr.patch
 delete mode 100644 target/linux/generic/hack-6.1/790-SFP-GE-T-ignore-TX_FAULT.patch
 delete mode 100644 target/linux/generic/hack-6.1/800-GPIO-add-named-gpio-exports.patch
 delete mode 100644 target/linux/generic/hack-6.1/810-bcma-ssb-fallback-sprom.patch
 delete mode 100644 target/linux/generic/hack-6.1/901-debloat_sock_diag.patch
 delete mode 100644 target/linux/generic/hack-6.1/902-debloat_proc.patch
 delete mode 100644 target/linux/generic/hack-6.1/904-debloat_dma_buf.patch
 delete mode 100644 target/linux/generic/hack-6.1/910-kobject_uevent.patch
 delete mode 100644 target/linux/generic/hack-6.1/911-kobject_add_broadcast_uevent.patch
 delete mode 100644 target/linux/generic/hack-6.1/920-device_tree_cmdline.patch
 delete mode 100644 target/linux/generic/hack-6.1/930-Revert-Revert-Revert-driver-core-Set-fw_devlink-on-b.patch
 delete mode 100644 target/linux/generic/pending-6.1/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch
 delete mode 100644 target/linux/generic/pending-6.1/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
 delete mode 100644 target/linux/generic/pending-6.1/103-kbuild-export-SUBARCH.patch
 delete mode 100644 target/linux/generic/pending-6.1/111-watchdog-max63xx_wdt-Add-support-for-specifying-WDI-.patch
 delete mode 100644 target/linux/generic/pending-6.1/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
 delete mode 100644 target/linux/generic/pending-6.1/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
 delete mode 100644 target/linux/generic/pending-6.1/141-jffs2-add-RENAME_EXCHANGE-support.patch
 delete mode 100644 target/linux/generic/pending-6.1/142-jffs2-add-splice-ops.patch
 delete mode 100644 target/linux/generic/pending-6.1/150-bridge_allow_receiption_on_disabled_port.patch
 delete mode 100644 target/linux/generic/pending-6.1/151-net-bridge-do-not-send-arp-replies-if-src-and-target.patch
 delete mode 100644 target/linux/generic/pending-6.1/190-rtc-rs5c372-support_alarms_up_to_1_week.patch
 delete mode 100644 target/linux/generic/pending-6.1/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch
 delete mode 100644 target/linux/generic/pending-6.1/203-kallsyms_uncompressed.patch
 delete mode 100644 target/linux/generic/pending-6.1/205-backtrace_module_info.patch
 delete mode 100644 target/linux/generic/pending-6.1/240-remove-unsane-filenames-from-deps_initramfs-list.patch
 delete mode 100644 target/linux/generic/pending-6.1/261-enable_wilink_platform_without_drivers.patch
 delete mode 100644 target/linux/generic/pending-6.1/270-platform-mikrotik-build-bits.patch
 delete mode 100644 target/linux/generic/pending-6.1/300-mips_expose_boot_raw.patch
 delete mode 100644 target/linux/generic/pending-6.1/301-MIPS-Add-barriers-between-dcache-icache-flushes.patch
 delete mode 100644 target/linux/generic/pending-6.1/302-mips_no_branch_likely.patch
 delete mode 100644 target/linux/generic/pending-6.1/305-mips_module_reloc.patch
 delete mode 100644 target/linux/generic/pending-6.1/308-mips32r2_tune.patch
 delete mode 100644 target/linux/generic/pending-6.1/310-arm_module_unresolved_weak_sym.patch
 delete mode 100644 target/linux/generic/pending-6.1/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
 delete mode 100644 target/linux/generic/pending-6.1/332-arc-add-OWRTDTB-section.patch
 delete mode 100644 target/linux/generic/pending-6.1/333-arc-enable-unaligned-access-in-kernel-mode.patch
 delete mode 100644 target/linux/generic/pending-6.1/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
 delete mode 100644 target/linux/generic/pending-6.1/350-mips-kernel-fix-detect_memory_region-function.patch
 delete mode 100644 target/linux/generic/pending-6.1/351-irqchip-bcm-6345-l1-request-memory-region.patch
 delete mode 100644 target/linux/generic/pending-6.1/400-mtd-mtdsplit-support.patch
 delete mode 100644 target/linux/generic/pending-6.1/401-mtd-don-t-register-NVMEM-devices-for-partitions-with.patch
 delete mode 100644 target/linux/generic/pending-6.1/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch
 delete mode 100644 target/linux/generic/pending-6.1/420-mtd-redboot_space.patch
 delete mode 100644 target/linux/generic/pending-6.1/430-mtd-add-myloader-partition-parser.patch
 delete mode 100644 target/linux/generic/pending-6.1/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
 delete mode 100644 target/linux/generic/pending-6.1/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
 delete mode 100644 target/linux/generic/pending-6.1/435-mtd-add-routerbootpart-parser-config.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-01-dt-bindings-mtd-add-basic-bindings-for-UBI.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-02-dt-bindings-mtd-ubi-volume-allow-UBI-volumes-to-prov.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-03-mtd-ubi-block-use-notifier-to-create-ubiblock-from-p.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-04-mtd-ubi-attach-from-device-tree.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-05-mtd-ubi-introduce-pre-removal-notification-for-UBI-v.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-06-mtd-ubi-populate-ubi-volume-fwnode.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-07-mtd-ubi-provide-NVMEM-layer-over-UBI-volumes.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-08-dt-bindings-block-add-basic-bindings-for-block-devic.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-09-block-partitions-populate-fwnode.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-10-block-add-new-genhd-flag-GENHD_FL_NVMEM.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-11-block-implement-NVMEM-provider.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-12-dt-bindings-mmc-mmc-card-add-block-device-nodes.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-13-mmc-core-set-card-fwnode_handle.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-14-mmc-block-set-fwnode-of-disk-devices.patch
 delete mode 100644 target/linux/generic/pending-6.1/450-15-mmc-block-set-GENHD_FL_NVMEM.patch
 delete mode 100644 target/linux/generic/pending-6.1/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
 delete mode 100644 target/linux/generic/pending-6.1/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
 delete mode 100644 target/linux/generic/pending-6.1/465-m25p80-mx-disable-software-protection.patch
 delete mode 100644 target/linux/generic/pending-6.1/476-mtd-spi-nor-add-eon-en25q128.patch
 delete mode 100644 target/linux/generic/pending-6.1/477-mtd-spi-nor-add-eon-en25qx128a.patch
 delete mode 100644 target/linux/generic/pending-6.1/479-mtd-spi-nor-add-xtx-xt25f128b.patch
 delete mode 100644 target/linux/generic/pending-6.1/481-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch
 delete mode 100644 target/linux/generic/pending-6.1/482-mtd-spi-nor-add-gd25q512.patch
 delete mode 100644 target/linux/generic/pending-6.1/484-mtd-spi-nor-add-esmt-f25l16pa.patch
 delete mode 100644 target/linux/generic/pending-6.1/485-mtd-spi-nor-add-xmc-xm25qh128c.patch
 delete mode 100644 target/linux/generic/pending-6.1/486-01-mtd-spinand-add-support-for-ESMT-F50x1G41LB.patch
 delete mode 100644 target/linux/generic/pending-6.1/487-mtd-spinand-Add-support-for-Etron-EM73D044VCx.patch
 delete mode 100644 target/linux/generic/pending-6.1/488-mtd-spi-nor-add-xmc-xm25qh64c.patch
 delete mode 100644 target/linux/generic/pending-6.1/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
 delete mode 100644 target/linux/generic/pending-6.1/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
 delete mode 100644 target/linux/generic/pending-6.1/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
 delete mode 100644 target/linux/generic/pending-6.1/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
 delete mode 100644 target/linux/generic/pending-6.1/494-mtd-ubi-add-EOF-marker-support.patch
 delete mode 100644 target/linux/generic/pending-6.1/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
 delete mode 100644 target/linux/generic/pending-6.1/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
 delete mode 100644 target/linux/generic/pending-6.1/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch
 delete mode 100644 target/linux/generic/pending-6.1/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch
 delete mode 100644 target/linux/generic/pending-6.1/500-fs_cdrom_dependencies.patch
 delete mode 100644 target/linux/generic/pending-6.1/510-block-add-uImage.FIT-subimage-block-driver.patch
 delete mode 100644 target/linux/generic/pending-6.1/511-init-bypass-device-lookup-for-dev-fit-rootfs.patch
 delete mode 100644 target/linux/generic/pending-6.1/530-jffs2_make_lzma_available.patch
 delete mode 100644 target/linux/generic/pending-6.1/532-jffs2_eofdetect.patch
 delete mode 100644 target/linux/generic/pending-6.1/600-netfilter_conntrack_flush.patch
 delete mode 100644 target/linux/generic/pending-6.1/610-netfilter_match_bypass_default_checks.patch
 delete mode 100644 target/linux/generic/pending-6.1/611-netfilter_match_bypass_default_table.patch
 delete mode 100644 target/linux/generic/pending-6.1/612-netfilter_match_reduce_memory_access.patch
 delete mode 100644 target/linux/generic/pending-6.1/620-net_sched-codel-do-not-defer-queue-length-update.patch
 delete mode 100644 target/linux/generic/pending-6.1/630-packet_socket_type.patch
 delete mode 100644 target/linux/generic/pending-6.1/655-increase_skb_pad.patch
 delete mode 100644 target/linux/generic/pending-6.1/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
 delete mode 100644 target/linux/generic/pending-6.1/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
 delete mode 100644 target/linux/generic/pending-6.1/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
 delete mode 100644 target/linux/generic/pending-6.1/680-net-add-TCP-fraglist-GRO-support.patch
 delete mode 100644 target/linux/generic/pending-6.1/683-of_net-add-mac-address-to-of-tree.patch
 delete mode 100644 target/linux/generic/pending-6.1/700-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
 delete mode 100644 target/linux/generic/pending-6.1/701-netfilter-nf_tables-ignore-EOPNOTSUPP-on-flowtable-d.patch
 delete mode 100644 target/linux/generic/pending-6.1/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch
 delete mode 100644 target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch
 delete mode 100644 target/linux/generic/pending-6.1/704-netfilter-nf_tables-fix-bidirectional-offload-regres.patch
 delete mode 100644 target/linux/generic/pending-6.1/705-net-dsa-tag_mtk-add-padding-for-tx-packets.patch
 delete mode 100644 target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
 delete mode 100644 target/linux/generic/pending-6.1/711-01-net-dsa-qca8k-implement-lag_fdb_add-del-ops.patch
 delete mode 100644 target/linux/generic/pending-6.1/711-02-net-dsa-qca8k-enable-flooding-to-both-CPU-port.patch
 delete mode 100644 target/linux/generic/pending-6.1/711-03-net-dsa-qca8k-add-support-for-port_change_master.patch
 delete mode 100644 target/linux/generic/pending-6.1/712-net-dsa-qca8k-enable-assisted-learning-on-CPU-port.patch
 delete mode 100644 target/linux/generic/pending-6.1/713-03-arm64-dts-qcom-ipq8074-add-clock-frequency-to-MDIO-n.patch
 delete mode 100644 target/linux/generic/pending-6.1/721-net-phy-realtek-rtl8221-allow-to-configure-SERDES-mo.patch
 delete mode 100644 target/linux/generic/pending-6.1/722-net-phy-realtek-support-switching-between-SGMII-and-.patch
 delete mode 100644 target/linux/generic/pending-6.1/724-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch
 delete mode 100644 target/linux/generic/pending-6.1/725-net-phy-realtek-disable-SGMII-in-band-AN-for-2-5G-PHYs.patch
 delete mode 100644 target/linux/generic/pending-6.1/726-net-phy-realtek-make-sure-paged-read-is-protected-by.patch
 delete mode 100644 target/linux/generic/pending-6.1/727-net-phy-realtek-use-inline-functions-for-10GbE-adver.patch
 delete mode 100644 target/linux/generic/pending-6.1/728-net-phy-realtek-check-validity-of-10GbE-link-partner.patch
 delete mode 100644 target/linux/generic/pending-6.1/729-net-phy-realtek-introduce-rtl822x_probe.patch
 delete mode 100644 target/linux/generic/pending-6.1/730-net-phy-realtek-detect-early-version-of-RTL8221B.patch
 delete mode 100644 target/linux/generic/pending-6.1/731-net-permit-ieee80211_ptr-even-with-no-CFG82111-suppo.patch
 delete mode 100644 target/linux/generic/pending-6.1/732-00-net-ethernet-mtk_eth_soc-compile-out-netsys-v2-code-.patch
 delete mode 100644 target/linux/generic/pending-6.1/732-01-net-ethernet-mtk_eth_soc-work-around-issue-with-send.patch
 delete mode 100644 target/linux/generic/pending-6.1/732-02-net-ethernet-mtk_eth_soc-set-NETIF_F_ALL_TSO.patch
 delete mode 100644 target/linux/generic/pending-6.1/732-03-net-ethernet-mtk_eth_soc-fix-remaining-throughput-re.patch
 delete mode 100644 target/linux/generic/pending-6.1/734-net-ethernet-mtk_eth_soc-ppe-fix-L2-offloading-with-.patch
 delete mode 100644 target/linux/generic/pending-6.1/737-net-ethernet-mtk_eth_soc-add-paths-and-SerDes-modes-.patch
 delete mode 100644 target/linux/generic/pending-6.1/738-net-ethernet-mtk_eth_soc-set-coherent-mask-to-get-PP.patch
 delete mode 100644 target/linux/generic/pending-6.1/739-01-dt-bindings-phy-mediatek-xfi-tphy-add-new-bindings.patch
 delete mode 100644 target/linux/generic/pending-6.1/739-02-phy-add-driver-for-MediaTek-XFI-T-PHY.patch
 delete mode 100644 target/linux/generic/pending-6.1/739-03-net-pcs-pcs-mtk-lynxi-add-platform-driver-for-MT7988.patch
 delete mode 100644 target/linux/generic/pending-6.1/739-04-dt-bindings-net-pcs-add-bindings-for-MediaTek-USXGMI.patch
 delete mode 100644 target/linux/generic/pending-6.1/739-05-net-pcs-add-driver-for-MediaTek-USXGMII-PCS.patch
 delete mode 100644 target/linux/generic/pending-6.1/740-net-phy-motorcomm-Add-missing-include.patch
 delete mode 100644 target/linux/generic/pending-6.1/741-net-phy-realtek-support-interrupt-of-RTL8221B.patch
 delete mode 100644 target/linux/generic/pending-6.1/742-net-phy-air_en8811h-reset-netdev-rules-when-LED-is-s.patch
 delete mode 100644 target/linux/generic/pending-6.1/760-net-core-add-optional-threading-for-backlog-processi.patch
 delete mode 100644 target/linux/generic/pending-6.1/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
 delete mode 100644 target/linux/generic/pending-6.1/772-net-dsa-b53-add-support-for-BCM63xx-RGMIIs.patch
 delete mode 100644 target/linux/generic/pending-6.1/773-net-dsa-b53-mmap-add-more-63xx-SoCs.patch
 delete mode 100644 target/linux/generic/pending-6.1/774-net-dsa-b53-mmap-allow-passing-a-chip-ID.patch
 delete mode 100644 target/linux/generic/pending-6.1/775-net-dsa-b53-add-BCM63268-RGMII-configuration.patch
 delete mode 100644 target/linux/generic/pending-6.1/777-net-dsa-b53-mdio-add-support-for-BCM53134.patch
 delete mode 100644 target/linux/generic/pending-6.1/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch
 delete mode 100644 target/linux/generic/pending-6.1/790-bus-mhi-core-add-SBL-state-callback.patch
 delete mode 100644 target/linux/generic/pending-6.1/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
 delete mode 100644 target/linux/generic/pending-6.1/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch
 delete mode 100644 target/linux/generic/pending-6.1/802-OPP-Provide-old-opp-to-config_clks-on-_set_opp.patch
 delete mode 100644 target/linux/generic/pending-6.1/802-nvmem-u-boot-env-align-endianness-of-crc32-values.patch
 delete mode 100644 target/linux/generic/pending-6.1/804-nvmem-core-support-mac-base-fixed-layout-cells.patch
 delete mode 100644 target/linux/generic/pending-6.1/810-pci_disable_common_quirks.patch
 delete mode 100644 target/linux/generic/pending-6.1/811-pci_disable_usb_common_quirks.patch
 delete mode 100644 target/linux/generic/pending-6.1/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
 delete mode 100644 target/linux/generic/pending-6.1/834-ledtrig-libata.patch
 delete mode 100644 target/linux/generic/pending-6.1/840-hwrng-bcm2835-set-quality-to-1000.patch
 delete mode 100644 target/linux/generic/pending-6.1/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch
 delete mode 100644 target/linux/generic/pending-6.1/850-dt-bindings-clk-add-BCM63268-timer-clock-definitions.patch
 delete mode 100644 target/linux/generic/pending-6.1/851-dt-bindings-reset-add-BCM63268-timer-reset-definitions.patch
 delete mode 100644 target/linux/generic/pending-6.1/852-clk-bcm-Add-BCM63268-timer-clock-and-reset-driver.patch
 delete mode 100644 target/linux/generic/pending-6.1/860-serial-8250_mtk-track-busclk-state-to-avoid-bus-error.patch
 delete mode 100644 target/linux/generic/pending-6.1/870-ARM-dts-nxp-imx7d-pico-add-cpu-supply-nodes.patch
 delete mode 100644 target/linux/generic/pending-6.1/880-01-dt-bindings-leds-add-LED_FUNCTION_MOBILE-for-mobile-.patch
 delete mode 100644 target/linux/generic/pending-6.1/880-02-dt-bindings-leds-add-LED_FUNCTION_SPEED_-for-link-sp.patch
 delete mode 100644 target/linux/generic/pending-6.1/920-mangle_bootargs.patch
 delete mode 100644 target/linux/generic/pending-6.1/980-tools-thermal-tmon-Fix-compilation-warning-for-wrong.patch

diff --git a/target/linux/generic/backport-6.1/020-v6.3-01-UPSTREAM-mm-multi-gen-LRU-rename-lru_gen_struct-to-l.patch b/target/linux/generic/backport-6.1/020-v6.3-01-UPSTREAM-mm-multi-gen-LRU-rename-lru_gen_struct-to-l.patch
deleted file mode 100644
index 2428bdcb72c0..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-01-UPSTREAM-mm-multi-gen-LRU-rename-lru_gen_struct-to-l.patch
+++ /dev/null
@@ -1,352 +0,0 @@
-From 8c20e2eb5f2a0175b774134685e4d7bd93e85ff8 Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Wed, 21 Dec 2022 21:18:59 -0700
-Subject: [PATCH 01/19] UPSTREAM: mm: multi-gen LRU: rename lru_gen_struct to
- lru_gen_folio
-
-Patch series "mm: multi-gen LRU: memcg LRU", v3.
-
-Overview
-========
-
-An memcg LRU is a per-node LRU of memcgs.  It is also an LRU of LRUs,
-since each node and memcg combination has an LRU of folios (see
-mem_cgroup_lruvec()).
-
-Its goal is to improve the scalability of global reclaim, which is
-critical to system-wide memory overcommit in data centers.  Note that
-memcg reclaim is currently out of scope.
-
-Its memory bloat is a pointer to each lruvec and negligible to each
-pglist_data.  In terms of traversing memcgs during global reclaim, it
-improves the best-case complexity from O(n) to O(1) and does not affect
-the worst-case complexity O(n).  Therefore, on average, it has a sublinear
-complexity in contrast to the current linear complexity.
-
-The basic structure of an memcg LRU can be understood by an analogy to
-the active/inactive LRU (of folios):
-1. It has the young and the old (generations), i.e., the counterparts
-   to the active and the inactive;
-2. The increment of max_seq triggers promotion, i.e., the counterpart
-   to activation;
-3. Other events trigger similar operations, e.g., offlining an memcg
-   triggers demotion, i.e., the counterpart to deactivation.
-
-In terms of global reclaim, it has two distinct features:
-1. Sharding, which allows each thread to start at a random memcg (in
-   the old generation) and improves parallelism;
-2. Eventual fairness, which allows direct reclaim to bail out at will
-   and reduces latency without affecting fairness over some time.
-
-The commit message in patch 6 details the workflow:
-https://lore.kernel.org/r/20221222041905.2431096-7-yuzhao@google.com/
-
-The following is a simple test to quickly verify its effectiveness.
-
-  Test design:
-  1. Create multiple memcgs.
-  2. Each memcg contains a job (fio).
-  3. All jobs access the same amount of memory randomly.
-  4. The system does not experience global memory pressure.
-  5. Periodically write to the root memory.reclaim.
-
-  Desired outcome:
-  1. All memcgs have similar pgsteal counts, i.e., stddev(pgsteal)
-     over mean(pgsteal) is close to 0%.
-  2. The total pgsteal is close to the total requested through
-     memory.reclaim, i.e., sum(pgsteal) over sum(requested) is close
-     to 100%.
-
-  Actual outcome [1]:
-                                     MGLRU off    MGLRU on
-  stddev(pgsteal) / mean(pgsteal)    75%          20%
-  sum(pgsteal) / sum(requested)      425%         95%
-
-  ####################################################################
-  MEMCGS=128
-
-  for ((memcg = 0; memcg < $MEMCGS; memcg++)); do
-      mkdir /sys/fs/cgroup/memcg$memcg
-  done
-
-  start() {
-      echo $BASHPID > /sys/fs/cgroup/memcg$memcg/cgroup.procs
-
-      fio -name=memcg$memcg --numjobs=1 --ioengine=mmap \
-          --filename=/dev/zero --size=1920M --rw=randrw \
-          --rate=64m,64m --random_distribution=random \
-          --fadvise_hint=0 --time_based --runtime=10h \
-          --group_reporting --minimal
-  }
-
-  for ((memcg = 0; memcg < $MEMCGS; memcg++)); do
-      start &
-  done
-
-  sleep 600
-
-  for ((i = 0; i < 600; i++)); do
-      echo 256m >/sys/fs/cgroup/memory.reclaim
-      sleep 6
-  done
-
-  for ((memcg = 0; memcg < $MEMCGS; memcg++)); do
-      grep "pgsteal " /sys/fs/cgroup/memcg$memcg/memory.stat
-  done
-  ####################################################################
-
-[1]: This was obtained from running the above script (touches less
-     than 256GB memory) on an EPYC 7B13 with 512GB DRAM for over an
-     hour.
-
-This patch (of 8):
-
-The new name lru_gen_folio will be more distinct from the coming
-lru_gen_memcg.
-
-Link: https://lkml.kernel.org/r/20221222041905.2431096-1-yuzhao@google.com
-Link: https://lkml.kernel.org/r/20221222041905.2431096-2-yuzhao@google.com
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Cc: Johannes Weiner <hannes@cmpxchg.org>
-Cc: Jonathan Corbet <corbet@lwn.net>
-Cc: Michael Larabel <Michael@MichaelLarabel.com>
-Cc: Michal Hocko <mhocko@kernel.org>
-Cc: Mike Rapoport <rppt@kernel.org>
-Cc: Roman Gushchin <roman.gushchin@linux.dev>
-Cc: Suren Baghdasaryan <surenb@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Bug: 274865848
-(cherry picked from commit 391655fe08d1f942359a11148aa9aaf3f99d6d6f)
-Change-Id: I7df67e0e2435ba28f10eaa57d28d98b61a9210a6
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- include/linux/mm_inline.h |  4 ++--
- include/linux/mmzone.h    |  6 +++---
- mm/vmscan.c               | 34 +++++++++++++++++-----------------
- mm/workingset.c           |  4 ++--
- 4 files changed, 24 insertions(+), 24 deletions(-)
-
---- a/include/linux/mm_inline.h
-+++ b/include/linux/mm_inline.h
-@@ -178,7 +178,7 @@ static inline void lru_gen_update_size(s
- 	int zone = folio_zonenum(folio);
- 	int delta = folio_nr_pages(folio);
- 	enum lru_list lru = type * LRU_INACTIVE_FILE;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 
- 	VM_WARN_ON_ONCE(old_gen != -1 && old_gen >= MAX_NR_GENS);
- 	VM_WARN_ON_ONCE(new_gen != -1 && new_gen >= MAX_NR_GENS);
-@@ -224,7 +224,7 @@ static inline bool lru_gen_add_folio(str
- 	int gen = folio_lru_gen(folio);
- 	int type = folio_is_file_lru(folio);
- 	int zone = folio_zonenum(folio);
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 
- 	VM_WARN_ON_ONCE_FOLIO(gen != -1, folio);
- 
---- a/include/linux/mmzone.h
-+++ b/include/linux/mmzone.h
-@@ -404,7 +404,7 @@ enum {
-  * The number of pages in each generation is eventually consistent and therefore
-  * can be transiently negative when reset_batch_size() is pending.
-  */
--struct lru_gen_struct {
-+struct lru_gen_folio {
- 	/* the aging increments the youngest generation number */
- 	unsigned long max_seq;
- 	/* the eviction increments the oldest generation numbers */
-@@ -461,7 +461,7 @@ struct lru_gen_mm_state {
- struct lru_gen_mm_walk {
- 	/* the lruvec under reclaim */
- 	struct lruvec *lruvec;
--	/* unstable max_seq from lru_gen_struct */
-+	/* unstable max_seq from lru_gen_folio */
- 	unsigned long max_seq;
- 	/* the next address within an mm to scan */
- 	unsigned long next_addr;
-@@ -524,7 +524,7 @@ struct lruvec {
- 	unsigned long			flags;
- #ifdef CONFIG_LRU_GEN
- 	/* evictable pages divided into generations */
--	struct lru_gen_struct		lrugen;
-+	struct lru_gen_folio		lrugen;
- 	/* to concurrently iterate lru_gen_mm_list */
- 	struct lru_gen_mm_state		mm_state;
- #endif
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -3190,7 +3190,7 @@ static int get_nr_gens(struct lruvec *lr
- 
- static bool __maybe_unused seq_is_valid(struct lruvec *lruvec)
- {
--	/* see the comment on lru_gen_struct */
-+	/* see the comment on lru_gen_folio */
- 	return get_nr_gens(lruvec, LRU_GEN_FILE) >= MIN_NR_GENS &&
- 	       get_nr_gens(lruvec, LRU_GEN_FILE) <= get_nr_gens(lruvec, LRU_GEN_ANON) &&
- 	       get_nr_gens(lruvec, LRU_GEN_ANON) <= MAX_NR_GENS;
-@@ -3596,7 +3596,7 @@ struct ctrl_pos {
- static void read_ctrl_pos(struct lruvec *lruvec, int type, int tier, int gain,
- 			  struct ctrl_pos *pos)
- {
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	int hist = lru_hist_from_seq(lrugen->min_seq[type]);
- 
- 	pos->refaulted = lrugen->avg_refaulted[type][tier] +
-@@ -3611,7 +3611,7 @@ static void read_ctrl_pos(struct lruvec
- static void reset_ctrl_pos(struct lruvec *lruvec, int type, bool carryover)
- {
- 	int hist, tier;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	bool clear = carryover ? NR_HIST_GENS == 1 : NR_HIST_GENS > 1;
- 	unsigned long seq = carryover ? lrugen->min_seq[type] : lrugen->max_seq + 1;
- 
-@@ -3688,7 +3688,7 @@ static int folio_update_gen(struct folio
- static int folio_inc_gen(struct lruvec *lruvec, struct folio *folio, bool reclaiming)
- {
- 	int type = folio_is_file_lru(folio);
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	int new_gen, old_gen = lru_gen_from_seq(lrugen->min_seq[type]);
- 	unsigned long new_flags, old_flags = READ_ONCE(folio->flags);
- 
-@@ -3733,7 +3733,7 @@ static void update_batch_size(struct lru
- static void reset_batch_size(struct lruvec *lruvec, struct lru_gen_mm_walk *walk)
- {
- 	int gen, type, zone;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 
- 	walk->batched = 0;
- 
-@@ -4250,7 +4250,7 @@ static bool inc_min_seq(struct lruvec *l
- {
- 	int zone;
- 	int remaining = MAX_LRU_BATCH;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	int new_gen, old_gen = lru_gen_from_seq(lrugen->min_seq[type]);
- 
- 	if (type == LRU_GEN_ANON && !can_swap)
-@@ -4286,7 +4286,7 @@ static bool try_to_inc_min_seq(struct lr
- {
- 	int gen, type, zone;
- 	bool success = false;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	DEFINE_MIN_SEQ(lruvec);
- 
- 	VM_WARN_ON_ONCE(!seq_is_valid(lruvec));
-@@ -4307,7 +4307,7 @@ next:
- 		;
- 	}
- 
--	/* see the comment on lru_gen_struct */
-+	/* see the comment on lru_gen_folio */
- 	if (can_swap) {
- 		min_seq[LRU_GEN_ANON] = min(min_seq[LRU_GEN_ANON], min_seq[LRU_GEN_FILE]);
- 		min_seq[LRU_GEN_FILE] = max(min_seq[LRU_GEN_ANON], lrugen->min_seq[LRU_GEN_FILE]);
-@@ -4329,7 +4329,7 @@ static void inc_max_seq(struct lruvec *l
- {
- 	int prev, next;
- 	int type, zone;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 
- restart:
- 	spin_lock_irq(&lruvec->lru_lock);
-@@ -4389,7 +4389,7 @@ static bool try_to_inc_max_seq(struct lr
- 	bool success;
- 	struct lru_gen_mm_walk *walk;
- 	struct mm_struct *mm = NULL;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 
- 	VM_WARN_ON_ONCE(max_seq > READ_ONCE(lrugen->max_seq));
- 
-@@ -4454,7 +4454,7 @@ static bool should_run_aging(struct lruv
- 	unsigned long old = 0;
- 	unsigned long young = 0;
- 	unsigned long total = 0;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
- 
- 	for (type = !can_swap; type < ANON_AND_FILE; type++) {
-@@ -4740,7 +4740,7 @@ static bool sort_folio(struct lruvec *lr
- 	int delta = folio_nr_pages(folio);
- 	int refs = folio_lru_refs(folio);
- 	int tier = lru_tier_from_refs(refs);
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 
- 	VM_WARN_ON_ONCE_FOLIO(gen >= MAX_NR_GENS, folio);
- 
-@@ -4848,7 +4848,7 @@ static int scan_folios(struct lruvec *lr
- 	int scanned = 0;
- 	int isolated = 0;
- 	int remaining = MAX_LRU_BATCH;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
- 
- 	VM_WARN_ON_ONCE(!list_empty(list));
-@@ -5248,7 +5248,7 @@ done:
- 
- static bool __maybe_unused state_is_valid(struct lruvec *lruvec)
- {
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 
- 	if (lrugen->enabled) {
- 		enum lru_list lru;
-@@ -5530,7 +5530,7 @@ static void lru_gen_seq_show_full(struct
- 	int i;
- 	int type, tier;
- 	int hist = lru_hist_from_seq(seq);
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 
- 	for (tier = 0; tier < MAX_NR_TIERS; tier++) {
- 		seq_printf(m, "            %10d", tier);
-@@ -5580,7 +5580,7 @@ static int lru_gen_seq_show(struct seq_f
- 	unsigned long seq;
- 	bool full = !debugfs_real_fops(m->file)->write;
- 	struct lruvec *lruvec = v;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	int nid = lruvec_pgdat(lruvec)->node_id;
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
- 	DEFINE_MAX_SEQ(lruvec);
-@@ -5834,7 +5834,7 @@ void lru_gen_init_lruvec(struct lruvec *
- {
- 	int i;
- 	int gen, type, zone;
--	struct lru_gen_struct *lrugen = &lruvec->lrugen;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 
- 	lrugen->max_seq = MIN_NR_GENS + 1;
- 	lrugen->enabled = lru_gen_enabled();
---- a/mm/workingset.c
-+++ b/mm/workingset.c
-@@ -223,7 +223,7 @@ static void *lru_gen_eviction(struct fol
- 	unsigned long token;
- 	unsigned long min_seq;
- 	struct lruvec *lruvec;
--	struct lru_gen_struct *lrugen;
-+	struct lru_gen_folio *lrugen;
- 	int type = folio_is_file_lru(folio);
- 	int delta = folio_nr_pages(folio);
- 	int refs = folio_lru_refs(folio);
-@@ -252,7 +252,7 @@ static void lru_gen_refault(struct folio
- 	unsigned long token;
- 	unsigned long min_seq;
- 	struct lruvec *lruvec;
--	struct lru_gen_struct *lrugen;
-+	struct lru_gen_folio *lrugen;
- 	struct mem_cgroup *memcg;
- 	struct pglist_data *pgdat;
- 	int type = folio_is_file_lru(folio);
diff --git a/target/linux/generic/backport-6.1/020-v6.3-03-UPSTREAM-mm-multi-gen-LRU-remove-eviction-fairness-s.patch b/target/linux/generic/backport-6.1/020-v6.3-03-UPSTREAM-mm-multi-gen-LRU-remove-eviction-fairness-s.patch
deleted file mode 100644
index 3a27bbcae032..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-03-UPSTREAM-mm-multi-gen-LRU-remove-eviction-fairness-s.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From 14f9a7a15f3d1af351f30e0438fd747b7ac253b0 Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Wed, 21 Dec 2022 21:19:01 -0700
-Subject: [PATCH 03/19] UPSTREAM: mm: multi-gen LRU: remove eviction fairness
- safeguard
-
-Recall that the eviction consumes the oldest generation: first it
-bucket-sorts folios whose gen counters were updated by the aging and
-reclaims the rest; then it increments lrugen->min_seq.
-
-The current eviction fairness safeguard for global reclaim has a
-dilemma: when there are multiple eligible memcgs, should it continue
-or stop upon meeting the reclaim goal? If it continues, it overshoots
-and increases direct reclaim latency; if it stops, it loses fairness
-between memcgs it has taken memory away from and those it has yet to.
-
-With memcg LRU, the eviction, while ensuring eventual fairness, will
-stop upon meeting its goal. Therefore the current eviction fairness
-safeguard for global reclaim will not be needed.
-
-Note that memcg LRU only applies to global reclaim. For memcg reclaim,
-the eviction will continue, even if it is overshooting. This becomes
-unconditional due to code simplification.
-
-Link: https://lkml.kernel.org/r/20221222041905.2431096-4-yuzhao@google.com
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Cc: Johannes Weiner <hannes@cmpxchg.org>
-Cc: Jonathan Corbet <corbet@lwn.net>
-Cc: Michael Larabel <Michael@MichaelLarabel.com>
-Cc: Michal Hocko <mhocko@kernel.org>
-Cc: Mike Rapoport <rppt@kernel.org>
-Cc: Roman Gushchin <roman.gushchin@linux.dev>
-Cc: Suren Baghdasaryan <surenb@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Bug: 274865848
-(cherry picked from commit a579086c99ed70cc4bfc104348dbe3dd8f2787e6)
-Change-Id: I08ac1b3c90e29cafd0566785aaa4bcdb5db7d22c
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- mm/vmscan.c | 81 +++++++++++++++--------------------------------------
- 1 file changed, 23 insertions(+), 58 deletions(-)
-
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -448,6 +448,11 @@ static bool cgroup_reclaim(struct scan_c
- 	return sc->target_mem_cgroup;
- }
- 
-+static bool global_reclaim(struct scan_control *sc)
-+{
-+	return !sc->target_mem_cgroup || mem_cgroup_is_root(sc->target_mem_cgroup);
-+}
-+
- /**
-  * writeback_throttling_sane - is the usual dirty throttling mechanism available?
-  * @sc: scan_control in question
-@@ -498,6 +503,11 @@ static bool cgroup_reclaim(struct scan_c
- 	return false;
- }
- 
-+static bool global_reclaim(struct scan_control *sc)
-+{
-+	return true;
-+}
-+
- static bool writeback_throttling_sane(struct scan_control *sc)
- {
- 	return true;
-@@ -5005,8 +5015,7 @@ static int isolate_folios(struct lruvec
- 	return scanned;
- }
- 
--static int evict_folios(struct lruvec *lruvec, struct scan_control *sc, int swappiness,
--			bool *need_swapping)
-+static int evict_folios(struct lruvec *lruvec, struct scan_control *sc, int swappiness)
- {
- 	int type;
- 	int scanned;
-@@ -5094,9 +5103,6 @@ retry:
- 		goto retry;
- 	}
- 
--	if (need_swapping && type == LRU_GEN_ANON)
--		*need_swapping = true;
--
- 	return scanned;
- }
- 
-@@ -5135,67 +5141,26 @@ done:
- 	return min_seq[!can_swap] + MIN_NR_GENS <= max_seq ? nr_to_scan : 0;
- }
- 
--static bool should_abort_scan(struct lruvec *lruvec, unsigned long seq,
--			      struct scan_control *sc, bool need_swapping)
-+static unsigned long get_nr_to_reclaim(struct scan_control *sc)
- {
--	int i;
--	DEFINE_MAX_SEQ(lruvec);
--
--	if (!current_is_kswapd()) {
--		/* age each memcg at most once to ensure fairness */
--		if (max_seq - seq > 1)
--			return true;
--
--		/* over-swapping can increase allocation latency */
--		if (sc->nr_reclaimed >= sc->nr_to_reclaim && need_swapping)
--			return true;
--
--		/* give this thread a chance to exit and free its memory */
--		if (fatal_signal_pending(current)) {
--			sc->nr_reclaimed += MIN_LRU_BATCH;
--			return true;
--		}
--
--		if (cgroup_reclaim(sc))
--			return false;
--	} else if (sc->nr_reclaimed - sc->last_reclaimed < sc->nr_to_reclaim)
--		return false;
--
--	/* keep scanning at low priorities to ensure fairness */
--	if (sc->priority > DEF_PRIORITY - 2)
--		return false;
--
--	/*
--	 * A minimum amount of work was done under global memory pressure. For
--	 * kswapd, it may be overshooting. For direct reclaim, the allocation
--	 * may succeed if all suitable zones are somewhat safe. In either case,
--	 * it's better to stop now, and restart later if necessary.
--	 */
--	for (i = 0; i <= sc->reclaim_idx; i++) {
--		unsigned long wmark;
--		struct zone *zone = lruvec_pgdat(lruvec)->node_zones + i;
--
--		if (!managed_zone(zone))
--			continue;
--
--		wmark = current_is_kswapd() ? high_wmark_pages(zone) : low_wmark_pages(zone);
--		if (wmark > zone_page_state(zone, NR_FREE_PAGES))
--			return false;
--	}
-+	/* don't abort memcg reclaim to ensure fairness */
-+	if (!global_reclaim(sc))
-+		return -1;
- 
--	sc->nr_reclaimed += MIN_LRU_BATCH;
-+	/* discount the previous progress for kswapd */
-+	if (current_is_kswapd())
-+		return sc->nr_to_reclaim + sc->last_reclaimed;
- 
--	return true;
-+	return max(sc->nr_to_reclaim, compact_gap(sc->order));
- }
- 
- static void lru_gen_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc)
- {
- 	struct blk_plug plug;
- 	bool need_aging = false;
--	bool need_swapping = false;
- 	unsigned long scanned = 0;
- 	unsigned long reclaimed = sc->nr_reclaimed;
--	DEFINE_MAX_SEQ(lruvec);
-+	unsigned long nr_to_reclaim = get_nr_to_reclaim(sc);
- 
- 	lru_add_drain();
- 
-@@ -5219,7 +5184,7 @@ static void lru_gen_shrink_lruvec(struct
- 		if (!nr_to_scan)
- 			goto done;
- 
--		delta = evict_folios(lruvec, sc, swappiness, &need_swapping);
-+		delta = evict_folios(lruvec, sc, swappiness);
- 		if (!delta)
- 			goto done;
- 
-@@ -5227,7 +5192,7 @@ static void lru_gen_shrink_lruvec(struct
- 		if (scanned >= nr_to_scan)
- 			break;
- 
--		if (should_abort_scan(lruvec, max_seq, sc, need_swapping))
-+		if (sc->nr_reclaimed >= nr_to_reclaim)
- 			break;
- 
- 		cond_resched();
-@@ -5677,7 +5642,7 @@ static int run_eviction(struct lruvec *l
- 		if (sc->nr_reclaimed >= nr_to_reclaim)
- 			return 0;
- 
--		if (!evict_folios(lruvec, sc, swappiness, NULL))
-+		if (!evict_folios(lruvec, sc, swappiness))
- 			return 0;
- 
- 		cond_resched();
diff --git a/target/linux/generic/backport-6.1/020-v6.3-04-BACKPORT-mm-multi-gen-LRU-remove-aging-fairness-safe.patch b/target/linux/generic/backport-6.1/020-v6.3-04-BACKPORT-mm-multi-gen-LRU-remove-aging-fairness-safe.patch
deleted file mode 100644
index 829588955410..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-04-BACKPORT-mm-multi-gen-LRU-remove-aging-fairness-safe.patch
+++ /dev/null
@@ -1,294 +0,0 @@
-From f3c93d2e37a3c56593d7ccf4f4bcf1b58426fdd8 Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Wed, 21 Dec 2022 21:19:02 -0700
-Subject: [PATCH 04/19] BACKPORT: mm: multi-gen LRU: remove aging fairness
- safeguard
-
-Recall that the aging produces the youngest generation: first it scans
-for accessed folios and updates their gen counters; then it increments
-lrugen->max_seq.
-
-The current aging fairness safeguard for kswapd uses two passes to
-ensure the fairness to multiple eligible memcgs. On the first pass,
-which is shared with the eviction, it checks whether all eligible
-memcgs are low on cold folios. If so, it requires a second pass, on
-which it ages all those memcgs at the same time.
-
-With memcg LRU, the aging, while ensuring eventual fairness, will run
-when necessary. Therefore the current aging fairness safeguard for
-kswapd will not be needed.
-
-Note that memcg LRU only applies to global reclaim. For memcg reclaim,
-the aging can be unfair to different memcgs, i.e., their
-lrugen->max_seq can be incremented at different paces.
-
-Link: https://lkml.kernel.org/r/20221222041905.2431096-5-yuzhao@google.com
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Cc: Johannes Weiner <hannes@cmpxchg.org>
-Cc: Jonathan Corbet <corbet@lwn.net>
-Cc: Michael Larabel <Michael@MichaelLarabel.com>
-Cc: Michal Hocko <mhocko@kernel.org>
-Cc: Mike Rapoport <rppt@kernel.org>
-Cc: Roman Gushchin <roman.gushchin@linux.dev>
-Cc: Suren Baghdasaryan <surenb@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Bug: 274865848
-(cherry picked from commit 7348cc91821b0cb24dfb00e578047f68299a50ab)
-[TJ: Resolved conflicts with older function signatures for
-min_cgroup_below_min / min_cgroup_below_low]
-Change-Id: I6e36ecfbaaefbc0a56d9a9d5d7cbe404ed7f57a5
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- mm/vmscan.c | 126 ++++++++++++++++++++++++----------------------------
- 1 file changed, 59 insertions(+), 67 deletions(-)
-
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -136,7 +136,6 @@ struct scan_control {
- 
- #ifdef CONFIG_LRU_GEN
- 	/* help kswapd make better choices among multiple memcgs */
--	unsigned int memcgs_need_aging:1;
- 	unsigned long last_reclaimed;
- #endif
- 
-@@ -4457,7 +4456,7 @@ done:
- 	return true;
- }
- 
--static bool should_run_aging(struct lruvec *lruvec, unsigned long max_seq, unsigned long *min_seq,
-+static bool should_run_aging(struct lruvec *lruvec, unsigned long max_seq,
- 			     struct scan_control *sc, bool can_swap, unsigned long *nr_to_scan)
- {
- 	int gen, type, zone;
-@@ -4466,6 +4465,13 @@ static bool should_run_aging(struct lruv
- 	unsigned long total = 0;
- 	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
-+	DEFINE_MIN_SEQ(lruvec);
-+
-+	/* whether this lruvec is completely out of cold folios */
-+	if (min_seq[!can_swap] + MIN_NR_GENS > max_seq) {
-+		*nr_to_scan = 0;
-+		return true;
-+	}
- 
- 	for (type = !can_swap; type < ANON_AND_FILE; type++) {
- 		unsigned long seq;
-@@ -4494,8 +4500,6 @@ static bool should_run_aging(struct lruv
- 	 * stalls when the number of generations reaches MIN_NR_GENS. Hence, the
- 	 * ideal number of generations is MIN_NR_GENS+1.
- 	 */
--	if (min_seq[!can_swap] + MIN_NR_GENS > max_seq)
--		return true;
- 	if (min_seq[!can_swap] + MIN_NR_GENS < max_seq)
- 		return false;
- 
-@@ -4514,40 +4518,54 @@ static bool should_run_aging(struct lruv
- 	return false;
- }
- 
--static bool age_lruvec(struct lruvec *lruvec, struct scan_control *sc, unsigned long min_ttl)
-+static bool lruvec_is_sizable(struct lruvec *lruvec, struct scan_control *sc)
- {
--	bool need_aging;
--	unsigned long nr_to_scan;
--	int swappiness = get_swappiness(lruvec, sc);
-+	int gen, type, zone;
-+	unsigned long total = 0;
-+	bool can_swap = get_swappiness(lruvec, sc);
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
- 	DEFINE_MAX_SEQ(lruvec);
- 	DEFINE_MIN_SEQ(lruvec);
- 
--	VM_WARN_ON_ONCE(sc->memcg_low_reclaim);
-+	for (type = !can_swap; type < ANON_AND_FILE; type++) {
-+		unsigned long seq;
- 
--	mem_cgroup_calculate_protection(NULL, memcg);
-+		for (seq = min_seq[type]; seq <= max_seq; seq++) {
-+			gen = lru_gen_from_seq(seq);
- 
--	if (mem_cgroup_below_min(memcg))
--		return false;
-+			for (zone = 0; zone < MAX_NR_ZONES; zone++)
-+				total += max(READ_ONCE(lrugen->nr_pages[gen][type][zone]), 0L);
-+		}
-+	}
- 
--	need_aging = should_run_aging(lruvec, max_seq, min_seq, sc, swappiness, &nr_to_scan);
-+	/* whether the size is big enough to be helpful */
-+	return mem_cgroup_online(memcg) ? (total >> sc->priority) : total;
-+}
- 
--	if (min_ttl) {
--		int gen = lru_gen_from_seq(min_seq[LRU_GEN_FILE]);
--		unsigned long birth = READ_ONCE(lruvec->lrugen.timestamps[gen]);
-+static bool lruvec_is_reclaimable(struct lruvec *lruvec, struct scan_control *sc,
-+				  unsigned long min_ttl)
-+{
-+	int gen;
-+	unsigned long birth;
-+	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
-+	DEFINE_MIN_SEQ(lruvec);
- 
--		if (time_is_after_jiffies(birth + min_ttl))
--			return false;
-+	VM_WARN_ON_ONCE(sc->memcg_low_reclaim);
- 
--		/* the size is likely too small to be helpful */
--		if (!nr_to_scan && sc->priority != DEF_PRIORITY)
--			return false;
--	}
-+	/* see the comment on lru_gen_folio */
-+	gen = lru_gen_from_seq(min_seq[LRU_GEN_FILE]);
-+	birth = READ_ONCE(lruvec->lrugen.timestamps[gen]);
- 
--	if (need_aging)
--		try_to_inc_max_seq(lruvec, max_seq, sc, swappiness, false);
-+	if (time_is_after_jiffies(birth + min_ttl))
-+		return false;
- 
--	return true;
-+	if (!lruvec_is_sizable(lruvec, sc))
-+		return false;
-+
-+	mem_cgroup_calculate_protection(NULL, memcg);
-+
-+	return !mem_cgroup_below_min(memcg);
- }
- 
- /* to protect the working set of the last N jiffies */
-@@ -4556,46 +4574,32 @@ static unsigned long lru_gen_min_ttl __r
- static void lru_gen_age_node(struct pglist_data *pgdat, struct scan_control *sc)
- {
- 	struct mem_cgroup *memcg;
--	bool success = false;
- 	unsigned long min_ttl = READ_ONCE(lru_gen_min_ttl);
- 
- 	VM_WARN_ON_ONCE(!current_is_kswapd());
- 
- 	sc->last_reclaimed = sc->nr_reclaimed;
- 
--	/*
--	 * To reduce the chance of going into the aging path, which can be
--	 * costly, optimistically skip it if the flag below was cleared in the
--	 * eviction path. This improves the overall performance when multiple
--	 * memcgs are available.
--	 */
--	if (!sc->memcgs_need_aging) {
--		sc->memcgs_need_aging = true;
-+	/* check the order to exclude compaction-induced reclaim */
-+	if (!min_ttl || sc->order || sc->priority == DEF_PRIORITY)
- 		return;
--	}
--
--	set_mm_walk(pgdat);
- 
- 	memcg = mem_cgroup_iter(NULL, NULL, NULL);
- 	do {
- 		struct lruvec *lruvec = mem_cgroup_lruvec(memcg, pgdat);
- 
--		if (age_lruvec(lruvec, sc, min_ttl))
--			success = true;
-+		if (lruvec_is_reclaimable(lruvec, sc, min_ttl)) {
-+			mem_cgroup_iter_break(NULL, memcg);
-+			return;
-+		}
- 
- 		cond_resched();
- 	} while ((memcg = mem_cgroup_iter(NULL, memcg, NULL)));
- 
--	clear_mm_walk();
--
--	/* check the order to exclude compaction-induced reclaim */
--	if (success || !min_ttl || sc->order)
--		return;
--
- 	/*
- 	 * The main goal is to OOM kill if every generation from all memcgs is
- 	 * younger than min_ttl. However, another possibility is all memcgs are
--	 * either below min or empty.
-+	 * either too small or below min.
- 	 */
- 	if (mutex_trylock(&oom_lock)) {
- 		struct oom_control oc = {
-@@ -5112,33 +5116,27 @@ retry:
-  *    reclaim.
-  */
- static unsigned long get_nr_to_scan(struct lruvec *lruvec, struct scan_control *sc,
--				    bool can_swap, bool *need_aging)
-+				    bool can_swap)
- {
- 	unsigned long nr_to_scan;
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
- 	DEFINE_MAX_SEQ(lruvec);
--	DEFINE_MIN_SEQ(lruvec);
- 
- 	if (mem_cgroup_below_min(memcg) ||
- 	    (mem_cgroup_below_low(memcg) && !sc->memcg_low_reclaim))
- 		return 0;
- 
--	*need_aging = should_run_aging(lruvec, max_seq, min_seq, sc, can_swap, &nr_to_scan);
--	if (!*need_aging)
-+	if (!should_run_aging(lruvec, max_seq, sc, can_swap, &nr_to_scan))
- 		return nr_to_scan;
- 
- 	/* skip the aging path at the default priority */
- 	if (sc->priority == DEF_PRIORITY)
--		goto done;
-+		return nr_to_scan;
- 
--	/* leave the work to lru_gen_age_node() */
--	if (current_is_kswapd())
--		return 0;
-+	try_to_inc_max_seq(lruvec, max_seq, sc, can_swap, false);
- 
--	if (try_to_inc_max_seq(lruvec, max_seq, sc, can_swap, false))
--		return nr_to_scan;
--done:
--	return min_seq[!can_swap] + MIN_NR_GENS <= max_seq ? nr_to_scan : 0;
-+	/* skip this lruvec as it's low on cold folios */
-+	return 0;
- }
- 
- static unsigned long get_nr_to_reclaim(struct scan_control *sc)
-@@ -5157,9 +5155,7 @@ static unsigned long get_nr_to_reclaim(s
- static void lru_gen_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc)
- {
- 	struct blk_plug plug;
--	bool need_aging = false;
- 	unsigned long scanned = 0;
--	unsigned long reclaimed = sc->nr_reclaimed;
- 	unsigned long nr_to_reclaim = get_nr_to_reclaim(sc);
- 
- 	lru_add_drain();
-@@ -5180,13 +5176,13 @@ static void lru_gen_shrink_lruvec(struct
- 		else
- 			swappiness = 0;
- 
--		nr_to_scan = get_nr_to_scan(lruvec, sc, swappiness, &need_aging);
-+		nr_to_scan = get_nr_to_scan(lruvec, sc, swappiness);
- 		if (!nr_to_scan)
--			goto done;
-+			break;
- 
- 		delta = evict_folios(lruvec, sc, swappiness);
- 		if (!delta)
--			goto done;
-+			break;
- 
- 		scanned += delta;
- 		if (scanned >= nr_to_scan)
-@@ -5198,10 +5194,6 @@ static void lru_gen_shrink_lruvec(struct
- 		cond_resched();
- 	}
- 
--	/* see the comment in lru_gen_age_node() */
--	if (sc->nr_reclaimed - reclaimed >= MIN_LRU_BATCH && !need_aging)
--		sc->memcgs_need_aging = false;
--done:
- 	clear_mm_walk();
- 
- 	blk_finish_plug(&plug);
diff --git a/target/linux/generic/backport-6.1/020-v6.3-05-UPSTREAM-mm-multi-gen-LRU-shuffle-should_run_aging.patch b/target/linux/generic/backport-6.1/020-v6.3-05-UPSTREAM-mm-multi-gen-LRU-shuffle-should_run_aging.patch
deleted file mode 100644
index 6374b425cd54..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-05-UPSTREAM-mm-multi-gen-LRU-shuffle-should_run_aging.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From eca3858631e0cbad2ca6e40f788892749428e4cb Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Wed, 21 Dec 2022 21:19:03 -0700
-Subject: [PATCH 05/19] UPSTREAM: mm: multi-gen LRU: shuffle should_run_aging()
-
-Move should_run_aging() next to its only caller left.
-
-Link: https://lkml.kernel.org/r/20221222041905.2431096-6-yuzhao@google.com
-Cc: Johannes Weiner <hannes@cmpxchg.org>
-Cc: Jonathan Corbet <corbet@lwn.net>
-Cc: Michael Larabel <Michael@MichaelLarabel.com>
-Cc: Michal Hocko <mhocko@kernel.org>
-Cc: Mike Rapoport <rppt@kernel.org>
-Cc: Roman Gushchin <roman.gushchin@linux.dev>
-Cc: Suren Baghdasaryan <surenb@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Bug: 274865848
-(cherry picked from commit 77d4459a4a1a472b7309e475f962dda87d950abd)
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
-Change-Id: I3b0383fe16b93a783b4d8c0b3a0b325160392576
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- mm/vmscan.c | 124 ++++++++++++++++++++++++++--------------------------
- 1 file changed, 62 insertions(+), 62 deletions(-)
-
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -4456,68 +4456,6 @@ done:
- 	return true;
- }
- 
--static bool should_run_aging(struct lruvec *lruvec, unsigned long max_seq,
--			     struct scan_control *sc, bool can_swap, unsigned long *nr_to_scan)
--{
--	int gen, type, zone;
--	unsigned long old = 0;
--	unsigned long young = 0;
--	unsigned long total = 0;
--	struct lru_gen_folio *lrugen = &lruvec->lrugen;
--	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
--	DEFINE_MIN_SEQ(lruvec);
--
--	/* whether this lruvec is completely out of cold folios */
--	if (min_seq[!can_swap] + MIN_NR_GENS > max_seq) {
--		*nr_to_scan = 0;
--		return true;
--	}
--
--	for (type = !can_swap; type < ANON_AND_FILE; type++) {
--		unsigned long seq;
--
--		for (seq = min_seq[type]; seq <= max_seq; seq++) {
--			unsigned long size = 0;
--
--			gen = lru_gen_from_seq(seq);
--
--			for (zone = 0; zone < MAX_NR_ZONES; zone++)
--				size += max(READ_ONCE(lrugen->nr_pages[gen][type][zone]), 0L);
--
--			total += size;
--			if (seq == max_seq)
--				young += size;
--			else if (seq + MIN_NR_GENS == max_seq)
--				old += size;
--		}
--	}
--
--	/* try to scrape all its memory if this memcg was deleted */
--	*nr_to_scan = mem_cgroup_online(memcg) ? (total >> sc->priority) : total;
--
--	/*
--	 * The aging tries to be lazy to reduce the overhead, while the eviction
--	 * stalls when the number of generations reaches MIN_NR_GENS. Hence, the
--	 * ideal number of generations is MIN_NR_GENS+1.
--	 */
--	if (min_seq[!can_swap] + MIN_NR_GENS < max_seq)
--		return false;
--
--	/*
--	 * It's also ideal to spread pages out evenly, i.e., 1/(MIN_NR_GENS+1)
--	 * of the total number of pages for each generation. A reasonable range
--	 * for this average portion is [1/MIN_NR_GENS, 1/(MIN_NR_GENS+2)]. The
--	 * aging cares about the upper bound of hot pages, while the eviction
--	 * cares about the lower bound of cold pages.
--	 */
--	if (young * MIN_NR_GENS > total)
--		return true;
--	if (old * (MIN_NR_GENS + 2) < total)
--		return true;
--
--	return false;
--}
--
- static bool lruvec_is_sizable(struct lruvec *lruvec, struct scan_control *sc)
- {
- 	int gen, type, zone;
-@@ -5110,6 +5048,68 @@ retry:
- 	return scanned;
- }
- 
-+static bool should_run_aging(struct lruvec *lruvec, unsigned long max_seq,
-+			     struct scan_control *sc, bool can_swap, unsigned long *nr_to_scan)
-+{
-+	int gen, type, zone;
-+	unsigned long old = 0;
-+	unsigned long young = 0;
-+	unsigned long total = 0;
-+	struct lru_gen_folio *lrugen = &lruvec->lrugen;
-+	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
-+	DEFINE_MIN_SEQ(lruvec);
-+
-+	/* whether this lruvec is completely out of cold folios */
-+	if (min_seq[!can_swap] + MIN_NR_GENS > max_seq) {
-+		*nr_to_scan = 0;
-+		return true;
-+	}
-+
-+	for (type = !can_swap; type < ANON_AND_FILE; type++) {
-+		unsigned long seq;
-+
-+		for (seq = min_seq[type]; seq <= max_seq; seq++) {
-+			unsigned long size = 0;
-+
-+			gen = lru_gen_from_seq(seq);
-+
-+			for (zone = 0; zone < MAX_NR_ZONES; zone++)
-+				size += max(READ_ONCE(lrugen->nr_pages[gen][type][zone]), 0L);
-+
-+			total += size;
-+			if (seq == max_seq)
-+				young += size;
-+			else if (seq + MIN_NR_GENS == max_seq)
-+				old += size;
-+		}
-+	}
-+
-+	/* try to scrape all its memory if this memcg was deleted */
-+	*nr_to_scan = mem_cgroup_online(memcg) ? (total >> sc->priority) : total;
-+
-+	/*
-+	 * The aging tries to be lazy to reduce the overhead, while the eviction
-+	 * stalls when the number of generations reaches MIN_NR_GENS. Hence, the
-+	 * ideal number of generations is MIN_NR_GENS+1.
-+	 */
-+	if (min_seq[!can_swap] + MIN_NR_GENS < max_seq)
-+		return false;
-+
-+	/*
-+	 * It's also ideal to spread pages out evenly, i.e., 1/(MIN_NR_GENS+1)
-+	 * of the total number of pages for each generation. A reasonable range
-+	 * for this average portion is [1/MIN_NR_GENS, 1/(MIN_NR_GENS+2)]. The
-+	 * aging cares about the upper bound of hot pages, while the eviction
-+	 * cares about the lower bound of cold pages.
-+	 */
-+	if (young * MIN_NR_GENS > total)
-+		return true;
-+	if (old * (MIN_NR_GENS + 2) < total)
-+		return true;
-+
-+	return false;
-+}
-+
- /*
-  * For future optimizations:
-  * 1. Defer try_to_inc_max_seq() to workqueues to reduce latency for memcg
diff --git a/target/linux/generic/backport-6.1/020-v6.3-06-BACKPORT-mm-multi-gen-LRU-per-node-lru_gen_folio-lis.patch b/target/linux/generic/backport-6.1/020-v6.3-06-BACKPORT-mm-multi-gen-LRU-per-node-lru_gen_folio-lis.patch
deleted file mode 100644
index 50ceaf13ed00..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-06-BACKPORT-mm-multi-gen-LRU-per-node-lru_gen_folio-lis.patch
+++ /dev/null
@@ -1,876 +0,0 @@
-From 8ee8571e47aa75221e5fbd4c9c7802fc4244c346 Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Wed, 21 Dec 2022 21:19:04 -0700
-Subject: [PATCH 06/19] BACKPORT: mm: multi-gen LRU: per-node lru_gen_folio
- lists
-
-For each node, memcgs are divided into two generations: the old and
-the young. For each generation, memcgs are randomly sharded into
-multiple bins to improve scalability. For each bin, an RCU hlist_nulls
-is virtually divided into three segments: the head, the tail and the
-default.
-
-An onlining memcg is added to the tail of a random bin in the old
-generation. The eviction starts at the head of a random bin in the old
-generation. The per-node memcg generation counter, whose reminder (mod
-2) indexes the old generation, is incremented when all its bins become
-empty.
-
-There are four operations:
-1. MEMCG_LRU_HEAD, which moves an memcg to the head of a random bin in
-   its current generation (old or young) and updates its "seg" to
-   "head";
-2. MEMCG_LRU_TAIL, which moves an memcg to the tail of a random bin in
-   its current generation (old or young) and updates its "seg" to
-   "tail";
-3. MEMCG_LRU_OLD, which moves an memcg to the head of a random bin in
-   the old generation, updates its "gen" to "old" and resets its "seg"
-   to "default";
-4. MEMCG_LRU_YOUNG, which moves an memcg to the tail of a random bin
-   in the young generation, updates its "gen" to "young" and resets
-   its "seg" to "default".
-
-The events that trigger the above operations are:
-1. Exceeding the soft limit, which triggers MEMCG_LRU_HEAD;
-2. The first attempt to reclaim an memcg below low, which triggers
-   MEMCG_LRU_TAIL;
-3. The first attempt to reclaim an memcg below reclaimable size
-   threshold, which triggers MEMCG_LRU_TAIL;
-4. The second attempt to reclaim an memcg below reclaimable size
-   threshold, which triggers MEMCG_LRU_YOUNG;
-5. Attempting to reclaim an memcg below min, which triggers
-   MEMCG_LRU_YOUNG;
-6. Finishing the aging on the eviction path, which triggers
-   MEMCG_LRU_YOUNG;
-7. Offlining an memcg, which triggers MEMCG_LRU_OLD.
-
-Note that memcg LRU only applies to global reclaim, and the
-round-robin incrementing of their max_seq counters ensures the
-eventual fairness to all eligible memcgs. For memcg reclaim, it still
-relies on mem_cgroup_iter().
-
-Link: https://lkml.kernel.org/r/20221222041905.2431096-7-yuzhao@google.com
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Cc: Johannes Weiner <hannes@cmpxchg.org>
-Cc: Jonathan Corbet <corbet@lwn.net>
-Cc: Michael Larabel <Michael@MichaelLarabel.com>
-Cc: Michal Hocko <mhocko@kernel.org>
-Cc: Mike Rapoport <rppt@kernel.org>
-Cc: Roman Gushchin <roman.gushchin@linux.dev>
-Cc: Suren Baghdasaryan <surenb@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Bug: 274865848
-(cherry picked from commit e4dde56cd208674ce899b47589f263499e5b8cdc)
-[TJ: Resolved conflicts with older function signatures for
-min_cgroup_below_min / min_cgroup_below_low and includes]
-Change-Id: Idc8a0f635e035d72dd911f807d1224cb47cbd655
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- include/linux/memcontrol.h |  10 +
- include/linux/mm_inline.h  |  17 ++
- include/linux/mmzone.h     | 117 +++++++++++-
- mm/memcontrol.c            |  16 ++
- mm/page_alloc.c            |   1 +
- mm/vmscan.c                | 374 +++++++++++++++++++++++++++++++++----
- 6 files changed, 500 insertions(+), 35 deletions(-)
-
---- a/include/linux/memcontrol.h
-+++ b/include/linux/memcontrol.h
-@@ -795,6 +795,11 @@ static inline void obj_cgroup_put(struct
- 	percpu_ref_put(&objcg->refcnt);
- }
- 
-+static inline bool mem_cgroup_tryget(struct mem_cgroup *memcg)
-+{
-+	return !memcg || css_tryget(&memcg->css);
-+}
-+
- static inline void mem_cgroup_put(struct mem_cgroup *memcg)
- {
- 	if (memcg)
-@@ -1295,6 +1300,11 @@ static inline void obj_cgroup_put(struct
- {
- }
- 
-+static inline bool mem_cgroup_tryget(struct mem_cgroup *memcg)
-+{
-+	return true;
-+}
-+
- static inline void mem_cgroup_put(struct mem_cgroup *memcg)
- {
- }
---- a/include/linux/mm_inline.h
-+++ b/include/linux/mm_inline.h
-@@ -122,6 +122,18 @@ static inline bool lru_gen_in_fault(void
- 	return current->in_lru_fault;
- }
- 
-+#ifdef CONFIG_MEMCG
-+static inline int lru_gen_memcg_seg(struct lruvec *lruvec)
-+{
-+	return READ_ONCE(lruvec->lrugen.seg);
-+}
-+#else
-+static inline int lru_gen_memcg_seg(struct lruvec *lruvec)
-+{
-+	return 0;
-+}
-+#endif
-+
- static inline int lru_gen_from_seq(unsigned long seq)
- {
- 	return seq % MAX_NR_GENS;
-@@ -302,6 +314,11 @@ static inline bool lru_gen_in_fault(void
- 	return false;
- }
- 
-+static inline int lru_gen_memcg_seg(struct lruvec *lruvec)
-+{
-+	return 0;
-+}
-+
- static inline bool lru_gen_add_folio(struct lruvec *lruvec, struct folio *folio, bool reclaiming)
- {
- 	return false;
---- a/include/linux/mmzone.h
-+++ b/include/linux/mmzone.h
-@@ -7,6 +7,7 @@
- 
- #include <linux/spinlock.h>
- #include <linux/list.h>
-+#include <linux/list_nulls.h>
- #include <linux/wait.h>
- #include <linux/bitops.h>
- #include <linux/cache.h>
-@@ -367,6 +368,15 @@ struct page_vma_mapped_walk;
- #define LRU_GEN_MASK		((BIT(LRU_GEN_WIDTH) - 1) << LRU_GEN_PGOFF)
- #define LRU_REFS_MASK		((BIT(LRU_REFS_WIDTH) - 1) << LRU_REFS_PGOFF)
- 
-+/* see the comment on MEMCG_NR_GENS */
-+enum {
-+	MEMCG_LRU_NOP,
-+	MEMCG_LRU_HEAD,
-+	MEMCG_LRU_TAIL,
-+	MEMCG_LRU_OLD,
-+	MEMCG_LRU_YOUNG,
-+};
-+
- #ifdef CONFIG_LRU_GEN
- 
- enum {
-@@ -426,6 +436,14 @@ struct lru_gen_folio {
- 	atomic_long_t refaulted[NR_HIST_GENS][ANON_AND_FILE][MAX_NR_TIERS];
- 	/* whether the multi-gen LRU is enabled */
- 	bool enabled;
-+#ifdef CONFIG_MEMCG
-+	/* the memcg generation this lru_gen_folio belongs to */
-+	u8 gen;
-+	/* the list segment this lru_gen_folio belongs to */
-+	u8 seg;
-+	/* per-node lru_gen_folio list for global reclaim */
-+	struct hlist_nulls_node list;
-+#endif
- };
- 
- enum {
-@@ -479,12 +497,87 @@ void lru_gen_init_lruvec(struct lruvec *
- void lru_gen_look_around(struct page_vma_mapped_walk *pvmw);
- 
- #ifdef CONFIG_MEMCG
-+
-+/*
-+ * For each node, memcgs are divided into two generations: the old and the
-+ * young. For each generation, memcgs are randomly sharded into multiple bins
-+ * to improve scalability. For each bin, the hlist_nulls is virtually divided
-+ * into three segments: the head, the tail and the default.
-+ *
-+ * An onlining memcg is added to the tail of a random bin in the old generation.
-+ * The eviction starts at the head of a random bin in the old generation. The
-+ * per-node memcg generation counter, whose reminder (mod MEMCG_NR_GENS) indexes
-+ * the old generation, is incremented when all its bins become empty.
-+ *
-+ * There are four operations:
-+ * 1. MEMCG_LRU_HEAD, which moves an memcg to the head of a random bin in its
-+ *    current generation (old or young) and updates its "seg" to "head";
-+ * 2. MEMCG_LRU_TAIL, which moves an memcg to the tail of a random bin in its
-+ *    current generation (old or young) and updates its "seg" to "tail";
-+ * 3. MEMCG_LRU_OLD, which moves an memcg to the head of a random bin in the old
-+ *    generation, updates its "gen" to "old" and resets its "seg" to "default";
-+ * 4. MEMCG_LRU_YOUNG, which moves an memcg to the tail of a random bin in the
-+ *    young generation, updates its "gen" to "young" and resets its "seg" to
-+ *    "default".
-+ *
-+ * The events that trigger the above operations are:
-+ * 1. Exceeding the soft limit, which triggers MEMCG_LRU_HEAD;
-+ * 2. The first attempt to reclaim an memcg below low, which triggers
-+ *    MEMCG_LRU_TAIL;
-+ * 3. The first attempt to reclaim an memcg below reclaimable size threshold,
-+ *    which triggers MEMCG_LRU_TAIL;
-+ * 4. The second attempt to reclaim an memcg below reclaimable size threshold,
-+ *    which triggers MEMCG_LRU_YOUNG;
-+ * 5. Attempting to reclaim an memcg below min, which triggers MEMCG_LRU_YOUNG;
-+ * 6. Finishing the aging on the eviction path, which triggers MEMCG_LRU_YOUNG;
-+ * 7. Offlining an memcg, which triggers MEMCG_LRU_OLD.
-+ *
-+ * Note that memcg LRU only applies to global reclaim, and the round-robin
-+ * incrementing of their max_seq counters ensures the eventual fairness to all
-+ * eligible memcgs. For memcg reclaim, it still relies on mem_cgroup_iter().
-+ */
-+#define MEMCG_NR_GENS	2
-+#define MEMCG_NR_BINS	8
-+
-+struct lru_gen_memcg {
-+	/* the per-node memcg generation counter */
-+	unsigned long seq;
-+	/* each memcg has one lru_gen_folio per node */
-+	unsigned long nr_memcgs[MEMCG_NR_GENS];
-+	/* per-node lru_gen_folio list for global reclaim */
-+	struct hlist_nulls_head	fifo[MEMCG_NR_GENS][MEMCG_NR_BINS];
-+	/* protects the above */
-+	spinlock_t lock;
-+};
-+
-+void lru_gen_init_pgdat(struct pglist_data *pgdat);
-+
- void lru_gen_init_memcg(struct mem_cgroup *memcg);
- void lru_gen_exit_memcg(struct mem_cgroup *memcg);
--#endif
-+void lru_gen_online_memcg(struct mem_cgroup *memcg);
-+void lru_gen_offline_memcg(struct mem_cgroup *memcg);
-+void lru_gen_release_memcg(struct mem_cgroup *memcg);
-+void lru_gen_rotate_memcg(struct lruvec *lruvec, int op);
-+
-+#else /* !CONFIG_MEMCG */
-+
-+#define MEMCG_NR_GENS	1
-+
-+struct lru_gen_memcg {
-+};
-+
-+static inline void lru_gen_init_pgdat(struct pglist_data *pgdat)
-+{
-+}
-+
-+#endif /* CONFIG_MEMCG */
- 
- #else /* !CONFIG_LRU_GEN */
- 
-+static inline void lru_gen_init_pgdat(struct pglist_data *pgdat)
-+{
-+}
-+
- static inline void lru_gen_init_lruvec(struct lruvec *lruvec)
- {
- }
-@@ -494,6 +587,7 @@ static inline void lru_gen_look_around(s
- }
- 
- #ifdef CONFIG_MEMCG
-+
- static inline void lru_gen_init_memcg(struct mem_cgroup *memcg)
- {
- }
-@@ -501,7 +595,24 @@ static inline void lru_gen_init_memcg(st
- static inline void lru_gen_exit_memcg(struct mem_cgroup *memcg)
- {
- }
--#endif
-+
-+static inline void lru_gen_online_memcg(struct mem_cgroup *memcg)
-+{
-+}
-+
-+static inline void lru_gen_offline_memcg(struct mem_cgroup *memcg)
-+{
-+}
-+
-+static inline void lru_gen_release_memcg(struct mem_cgroup *memcg)
-+{
-+}
-+
-+static inline void lru_gen_rotate_memcg(struct lruvec *lruvec, int op)
-+{
-+}
-+
-+#endif /* CONFIG_MEMCG */
- 
- #endif /* CONFIG_LRU_GEN */
- 
-@@ -1218,6 +1329,8 @@ typedef struct pglist_data {
- #ifdef CONFIG_LRU_GEN
- 	/* kswap mm walk data */
- 	struct lru_gen_mm_walk	mm_walk;
-+	/* lru_gen_folio list */
-+	struct lru_gen_memcg memcg_lru;
- #endif
- 
- 	CACHELINE_PADDING(_pad2_);
---- a/mm/memcontrol.c
-+++ b/mm/memcontrol.c
-@@ -477,6 +477,16 @@ static void mem_cgroup_update_tree(struc
- 	struct mem_cgroup_per_node *mz;
- 	struct mem_cgroup_tree_per_node *mctz;
- 
-+	if (lru_gen_enabled()) {
-+		struct lruvec *lruvec = &memcg->nodeinfo[nid]->lruvec;
-+
-+		/* see the comment on MEMCG_NR_GENS */
-+		if (soft_limit_excess(memcg) && lru_gen_memcg_seg(lruvec) != MEMCG_LRU_HEAD)
-+			lru_gen_rotate_memcg(lruvec, MEMCG_LRU_HEAD);
-+
-+		return;
-+	}
-+
- 	mctz = soft_limit_tree.rb_tree_per_node[nid];
- 	if (!mctz)
- 		return;
-@@ -3524,6 +3534,9 @@ unsigned long mem_cgroup_soft_limit_recl
- 	struct mem_cgroup_tree_per_node *mctz;
- 	unsigned long excess;
- 
-+	if (lru_gen_enabled())
-+		return 0;
-+
- 	if (order > 0)
- 		return 0;
- 
-@@ -5390,6 +5403,7 @@ static int mem_cgroup_css_online(struct
- 	if (unlikely(mem_cgroup_is_root(memcg)))
- 		queue_delayed_work(system_unbound_wq, &stats_flush_dwork,
- 				   2UL*HZ);
-+	lru_gen_online_memcg(memcg);
- 	return 0;
- offline_kmem:
- 	memcg_offline_kmem(memcg);
-@@ -5421,6 +5435,7 @@ static void mem_cgroup_css_offline(struc
- 	memcg_offline_kmem(memcg);
- 	reparent_shrinker_deferred(memcg);
- 	wb_memcg_offline(memcg);
-+	lru_gen_offline_memcg(memcg);
- 
- 	drain_all_stock(memcg);
- 
-@@ -5432,6 +5447,7 @@ static void mem_cgroup_css_released(stru
- 	struct mem_cgroup *memcg = mem_cgroup_from_css(css);
- 
- 	invalidate_reclaim_iterators(memcg);
-+	lru_gen_release_memcg(memcg);
- }
- 
- static void mem_cgroup_css_free(struct cgroup_subsys_state *css)
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -7956,6 +7956,7 @@ static void __init free_area_init_node(i
- 	pgdat_set_deferred_range(pgdat);
- 
- 	free_area_init_core(pgdat);
-+	lru_gen_init_pgdat(pgdat);
- }
- 
- static void __init free_area_init_memoryless_node(int nid)
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -54,6 +54,8 @@
- #include <linux/shmem_fs.h>
- #include <linux/ctype.h>
- #include <linux/debugfs.h>
-+#include <linux/rculist_nulls.h>
-+#include <linux/random.h>
- 
- #include <asm/tlbflush.h>
- #include <asm/div64.h>
-@@ -134,11 +136,6 @@ struct scan_control {
- 	/* Always discard instead of demoting to lower tier memory */
- 	unsigned int no_demotion:1;
- 
--#ifdef CONFIG_LRU_GEN
--	/* help kswapd make better choices among multiple memcgs */
--	unsigned long last_reclaimed;
--#endif
--
- 	/* Allocation order */
- 	s8 order;
- 
-@@ -3160,6 +3157,9 @@ DEFINE_STATIC_KEY_ARRAY_FALSE(lru_gen_ca
- 		for ((type) = 0; (type) < ANON_AND_FILE; (type)++)	\
- 			for ((zone) = 0; (zone) < MAX_NR_ZONES; (zone)++)
- 
-+#define get_memcg_gen(seq)	((seq) % MEMCG_NR_GENS)
-+#define get_memcg_bin(bin)	((bin) % MEMCG_NR_BINS)
-+
- static struct lruvec *get_lruvec(struct mem_cgroup *memcg, int nid)
- {
- 	struct pglist_data *pgdat = NODE_DATA(nid);
-@@ -4442,8 +4442,7 @@ done:
- 		if (sc->priority <= DEF_PRIORITY - 2)
- 			wait_event_killable(lruvec->mm_state.wait,
- 					    max_seq < READ_ONCE(lrugen->max_seq));
--
--		return max_seq < READ_ONCE(lrugen->max_seq);
-+		return false;
- 	}
- 
- 	VM_WARN_ON_ONCE(max_seq != READ_ONCE(lrugen->max_seq));
-@@ -4516,8 +4515,6 @@ static void lru_gen_age_node(struct pgli
- 
- 	VM_WARN_ON_ONCE(!current_is_kswapd());
- 
--	sc->last_reclaimed = sc->nr_reclaimed;
--
- 	/* check the order to exclude compaction-induced reclaim */
- 	if (!min_ttl || sc->order || sc->priority == DEF_PRIORITY)
- 		return;
-@@ -5115,8 +5112,7 @@ static bool should_run_aging(struct lruv
-  * 1. Defer try_to_inc_max_seq() to workqueues to reduce latency for memcg
-  *    reclaim.
-  */
--static unsigned long get_nr_to_scan(struct lruvec *lruvec, struct scan_control *sc,
--				    bool can_swap)
-+static long get_nr_to_scan(struct lruvec *lruvec, struct scan_control *sc, bool can_swap)
- {
- 	unsigned long nr_to_scan;
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
-@@ -5133,10 +5129,8 @@ static unsigned long get_nr_to_scan(stru
- 	if (sc->priority == DEF_PRIORITY)
- 		return nr_to_scan;
- 
--	try_to_inc_max_seq(lruvec, max_seq, sc, can_swap, false);
--
- 	/* skip this lruvec as it's low on cold folios */
--	return 0;
-+	return try_to_inc_max_seq(lruvec, max_seq, sc, can_swap, false) ? -1 : 0;
- }
- 
- static unsigned long get_nr_to_reclaim(struct scan_control *sc)
-@@ -5145,29 +5139,18 @@ static unsigned long get_nr_to_reclaim(s
- 	if (!global_reclaim(sc))
- 		return -1;
- 
--	/* discount the previous progress for kswapd */
--	if (current_is_kswapd())
--		return sc->nr_to_reclaim + sc->last_reclaimed;
--
- 	return max(sc->nr_to_reclaim, compact_gap(sc->order));
- }
- 
--static void lru_gen_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc)
-+static bool try_to_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc)
- {
--	struct blk_plug plug;
-+	long nr_to_scan;
- 	unsigned long scanned = 0;
- 	unsigned long nr_to_reclaim = get_nr_to_reclaim(sc);
- 
--	lru_add_drain();
--
--	blk_start_plug(&plug);
--
--	set_mm_walk(lruvec_pgdat(lruvec));
--
- 	while (true) {
- 		int delta;
- 		int swappiness;
--		unsigned long nr_to_scan;
- 
- 		if (sc->may_swap)
- 			swappiness = get_swappiness(lruvec, sc);
-@@ -5177,7 +5160,7 @@ static void lru_gen_shrink_lruvec(struct
- 			swappiness = 0;
- 
- 		nr_to_scan = get_nr_to_scan(lruvec, sc, swappiness);
--		if (!nr_to_scan)
-+		if (nr_to_scan <= 0)
- 			break;
- 
- 		delta = evict_folios(lruvec, sc, swappiness);
-@@ -5194,10 +5177,251 @@ static void lru_gen_shrink_lruvec(struct
- 		cond_resched();
- 	}
- 
-+	/* whether try_to_inc_max_seq() was successful */
-+	return nr_to_scan < 0;
-+}
-+
-+static int shrink_one(struct lruvec *lruvec, struct scan_control *sc)
-+{
-+	bool success;
-+	unsigned long scanned = sc->nr_scanned;
-+	unsigned long reclaimed = sc->nr_reclaimed;
-+	int seg = lru_gen_memcg_seg(lruvec);
-+	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
-+	struct pglist_data *pgdat = lruvec_pgdat(lruvec);
-+
-+	/* see the comment on MEMCG_NR_GENS */
-+	if (!lruvec_is_sizable(lruvec, sc))
-+		return seg != MEMCG_LRU_TAIL ? MEMCG_LRU_TAIL : MEMCG_LRU_YOUNG;
-+
-+	mem_cgroup_calculate_protection(NULL, memcg);
-+
-+	if (mem_cgroup_below_min(memcg))
-+		return MEMCG_LRU_YOUNG;
-+
-+	if (mem_cgroup_below_low(memcg)) {
-+		/* see the comment on MEMCG_NR_GENS */
-+		if (seg != MEMCG_LRU_TAIL)
-+			return MEMCG_LRU_TAIL;
-+
-+		memcg_memory_event(memcg, MEMCG_LOW);
-+	}
-+
-+	success = try_to_shrink_lruvec(lruvec, sc);
-+
-+	shrink_slab(sc->gfp_mask, pgdat->node_id, memcg, sc->priority);
-+
-+	if (!sc->proactive)
-+		vmpressure(sc->gfp_mask, memcg, false, sc->nr_scanned - scanned,
-+			   sc->nr_reclaimed - reclaimed);
-+
-+	sc->nr_reclaimed += current->reclaim_state->reclaimed_slab;
-+	current->reclaim_state->reclaimed_slab = 0;
-+
-+	return success ? MEMCG_LRU_YOUNG : 0;
-+}
-+
-+#ifdef CONFIG_MEMCG
-+
-+static void shrink_many(struct pglist_data *pgdat, struct scan_control *sc)
-+{
-+	int gen;
-+	int bin;
-+	int first_bin;
-+	struct lruvec *lruvec;
-+	struct lru_gen_folio *lrugen;
-+	const struct hlist_nulls_node *pos;
-+	int op = 0;
-+	struct mem_cgroup *memcg = NULL;
-+	unsigned long nr_to_reclaim = get_nr_to_reclaim(sc);
-+
-+	bin = first_bin = get_random_u32_below(MEMCG_NR_BINS);
-+restart:
-+	gen = get_memcg_gen(READ_ONCE(pgdat->memcg_lru.seq));
-+
-+	rcu_read_lock();
-+
-+	hlist_nulls_for_each_entry_rcu(lrugen, pos, &pgdat->memcg_lru.fifo[gen][bin], list) {
-+		if (op)
-+			lru_gen_rotate_memcg(lruvec, op);
-+
-+		mem_cgroup_put(memcg);
-+
-+		lruvec = container_of(lrugen, struct lruvec, lrugen);
-+		memcg = lruvec_memcg(lruvec);
-+
-+		if (!mem_cgroup_tryget(memcg)) {
-+			op = 0;
-+			memcg = NULL;
-+			continue;
-+		}
-+
-+		rcu_read_unlock();
-+
-+		op = shrink_one(lruvec, sc);
-+
-+		if (sc->nr_reclaimed >= nr_to_reclaim)
-+			goto success;
-+
-+		rcu_read_lock();
-+	}
-+
-+	rcu_read_unlock();
-+
-+	/* restart if raced with lru_gen_rotate_memcg() */
-+	if (gen != get_nulls_value(pos))
-+		goto restart;
-+
-+	/* try the rest of the bins of the current generation */
-+	bin = get_memcg_bin(bin + 1);
-+	if (bin != first_bin)
-+		goto restart;
-+success:
-+	if (op)
-+		lru_gen_rotate_memcg(lruvec, op);
-+
-+	mem_cgroup_put(memcg);
-+}
-+
-+static void lru_gen_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc)
-+{
-+	struct blk_plug plug;
-+
-+	VM_WARN_ON_ONCE(global_reclaim(sc));
-+
-+	lru_add_drain();
-+
-+	blk_start_plug(&plug);
-+
-+	set_mm_walk(lruvec_pgdat(lruvec));
-+
-+	if (try_to_shrink_lruvec(lruvec, sc))
-+		lru_gen_rotate_memcg(lruvec, MEMCG_LRU_YOUNG);
-+
-+	clear_mm_walk();
-+
-+	blk_finish_plug(&plug);
-+}
-+
-+#else /* !CONFIG_MEMCG */
-+
-+static void shrink_many(struct pglist_data *pgdat, struct scan_control *sc)
-+{
-+	BUILD_BUG();
-+}
-+
-+static void lru_gen_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc)
-+{
-+	BUILD_BUG();
-+}
-+
-+#endif
-+
-+static void set_initial_priority(struct pglist_data *pgdat, struct scan_control *sc)
-+{
-+	int priority;
-+	unsigned long reclaimable;
-+	struct lruvec *lruvec = mem_cgroup_lruvec(NULL, pgdat);
-+
-+	if (sc->priority != DEF_PRIORITY || sc->nr_to_reclaim < MIN_LRU_BATCH)
-+		return;
-+	/*
-+	 * Determine the initial priority based on ((total / MEMCG_NR_GENS) >>
-+	 * priority) * reclaimed_to_scanned_ratio = nr_to_reclaim, where the
-+	 * estimated reclaimed_to_scanned_ratio = inactive / total.
-+	 */
-+	reclaimable = node_page_state(pgdat, NR_INACTIVE_FILE);
-+	if (get_swappiness(lruvec, sc))
-+		reclaimable += node_page_state(pgdat, NR_INACTIVE_ANON);
-+
-+	reclaimable /= MEMCG_NR_GENS;
-+
-+	/* round down reclaimable and round up sc->nr_to_reclaim */
-+	priority = fls_long(reclaimable) - 1 - fls_long(sc->nr_to_reclaim - 1);
-+
-+	sc->priority = clamp(priority, 0, DEF_PRIORITY);
-+}
-+
-+static void lru_gen_shrink_node(struct pglist_data *pgdat, struct scan_control *sc)
-+{
-+	struct blk_plug plug;
-+	unsigned long reclaimed = sc->nr_reclaimed;
-+
-+	VM_WARN_ON_ONCE(!global_reclaim(sc));
-+
-+	lru_add_drain();
-+
-+	blk_start_plug(&plug);
-+
-+	set_mm_walk(pgdat);
-+
-+	set_initial_priority(pgdat, sc);
-+
-+	if (current_is_kswapd())
-+		sc->nr_reclaimed = 0;
-+
-+	if (mem_cgroup_disabled())
-+		shrink_one(&pgdat->__lruvec, sc);
-+	else
-+		shrink_many(pgdat, sc);
-+
-+	if (current_is_kswapd())
-+		sc->nr_reclaimed += reclaimed;
-+
- 	clear_mm_walk();
- 
- 	blk_finish_plug(&plug);
-+
-+	/* kswapd should never fail */
-+	pgdat->kswapd_failures = 0;
-+}
-+
-+#ifdef CONFIG_MEMCG
-+void lru_gen_rotate_memcg(struct lruvec *lruvec, int op)
-+{
-+	int seg;
-+	int old, new;
-+	int bin = get_random_u32_below(MEMCG_NR_BINS);
-+	struct pglist_data *pgdat = lruvec_pgdat(lruvec);
-+
-+	spin_lock(&pgdat->memcg_lru.lock);
-+
-+	VM_WARN_ON_ONCE(hlist_nulls_unhashed(&lruvec->lrugen.list));
-+
-+	seg = 0;
-+	new = old = lruvec->lrugen.gen;
-+
-+	/* see the comment on MEMCG_NR_GENS */
-+	if (op == MEMCG_LRU_HEAD)
-+		seg = MEMCG_LRU_HEAD;
-+	else if (op == MEMCG_LRU_TAIL)
-+		seg = MEMCG_LRU_TAIL;
-+	else if (op == MEMCG_LRU_OLD)
-+		new = get_memcg_gen(pgdat->memcg_lru.seq);
-+	else if (op == MEMCG_LRU_YOUNG)
-+		new = get_memcg_gen(pgdat->memcg_lru.seq + 1);
-+	else
-+		VM_WARN_ON_ONCE(true);
-+
-+	hlist_nulls_del_rcu(&lruvec->lrugen.list);
-+
-+	if (op == MEMCG_LRU_HEAD || op == MEMCG_LRU_OLD)
-+		hlist_nulls_add_head_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[new][bin]);
-+	else
-+		hlist_nulls_add_tail_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[new][bin]);
-+
-+	pgdat->memcg_lru.nr_memcgs[old]--;
-+	pgdat->memcg_lru.nr_memcgs[new]++;
-+
-+	lruvec->lrugen.gen = new;
-+	WRITE_ONCE(lruvec->lrugen.seg, seg);
-+
-+	if (!pgdat->memcg_lru.nr_memcgs[old] && old == get_memcg_gen(pgdat->memcg_lru.seq))
-+		WRITE_ONCE(pgdat->memcg_lru.seq, pgdat->memcg_lru.seq + 1);
-+
-+	spin_unlock(&pgdat->memcg_lru.lock);
- }
-+#endif
- 
- /******************************************************************************
-  *                          state change
-@@ -5655,11 +5879,11 @@ static int run_cmd(char cmd, int memcg_i
- 
- 	if (!mem_cgroup_disabled()) {
- 		rcu_read_lock();
-+
- 		memcg = mem_cgroup_from_id(memcg_id);
--#ifdef CONFIG_MEMCG
--		if (memcg && !css_tryget(&memcg->css))
-+		if (!mem_cgroup_tryget(memcg))
- 			memcg = NULL;
--#endif
-+
- 		rcu_read_unlock();
- 
- 		if (!memcg)
-@@ -5807,6 +6031,19 @@ void lru_gen_init_lruvec(struct lruvec *
- }
- 
- #ifdef CONFIG_MEMCG
-+
-+void lru_gen_init_pgdat(struct pglist_data *pgdat)
-+{
-+	int i, j;
-+
-+	spin_lock_init(&pgdat->memcg_lru.lock);
-+
-+	for (i = 0; i < MEMCG_NR_GENS; i++) {
-+		for (j = 0; j < MEMCG_NR_BINS; j++)
-+			INIT_HLIST_NULLS_HEAD(&pgdat->memcg_lru.fifo[i][j], i);
-+	}
-+}
-+
- void lru_gen_init_memcg(struct mem_cgroup *memcg)
- {
- 	INIT_LIST_HEAD(&memcg->mm_list.fifo);
-@@ -5830,7 +6067,69 @@ void lru_gen_exit_memcg(struct mem_cgrou
- 		}
- 	}
- }
--#endif
-+
-+void lru_gen_online_memcg(struct mem_cgroup *memcg)
-+{
-+	int gen;
-+	int nid;
-+	int bin = get_random_u32_below(MEMCG_NR_BINS);
-+
-+	for_each_node(nid) {
-+		struct pglist_data *pgdat = NODE_DATA(nid);
-+		struct lruvec *lruvec = get_lruvec(memcg, nid);
-+
-+		spin_lock(&pgdat->memcg_lru.lock);
-+
-+		VM_WARN_ON_ONCE(!hlist_nulls_unhashed(&lruvec->lrugen.list));
-+
-+		gen = get_memcg_gen(pgdat->memcg_lru.seq);
-+
-+		hlist_nulls_add_tail_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[gen][bin]);
-+		pgdat->memcg_lru.nr_memcgs[gen]++;
-+
-+		lruvec->lrugen.gen = gen;
-+
-+		spin_unlock(&pgdat->memcg_lru.lock);
-+	}
-+}
-+
-+void lru_gen_offline_memcg(struct mem_cgroup *memcg)
-+{
-+	int nid;
-+
-+	for_each_node(nid) {
-+		struct lruvec *lruvec = get_lruvec(memcg, nid);
-+
-+		lru_gen_rotate_memcg(lruvec, MEMCG_LRU_OLD);
-+	}
-+}
-+
-+void lru_gen_release_memcg(struct mem_cgroup *memcg)
-+{
-+	int gen;
-+	int nid;
-+
-+	for_each_node(nid) {
-+		struct pglist_data *pgdat = NODE_DATA(nid);
-+		struct lruvec *lruvec = get_lruvec(memcg, nid);
-+
-+		spin_lock(&pgdat->memcg_lru.lock);
-+
-+		VM_WARN_ON_ONCE(hlist_nulls_unhashed(&lruvec->lrugen.list));
-+
-+		gen = lruvec->lrugen.gen;
-+
-+		hlist_nulls_del_rcu(&lruvec->lrugen.list);
-+		pgdat->memcg_lru.nr_memcgs[gen]--;
-+
-+		if (!pgdat->memcg_lru.nr_memcgs[gen] && gen == get_memcg_gen(pgdat->memcg_lru.seq))
-+			WRITE_ONCE(pgdat->memcg_lru.seq, pgdat->memcg_lru.seq + 1);
-+
-+		spin_unlock(&pgdat->memcg_lru.lock);
-+	}
-+}
-+
-+#endif /* CONFIG_MEMCG */
- 
- static int __init init_lru_gen(void)
- {
-@@ -5857,6 +6156,10 @@ static void lru_gen_shrink_lruvec(struct
- {
- }
- 
-+static void lru_gen_shrink_node(struct pglist_data *pgdat, struct scan_control *sc)
-+{
-+}
-+
- #endif /* CONFIG_LRU_GEN */
- 
- static void shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc)
-@@ -5870,7 +6173,7 @@ static void shrink_lruvec(struct lruvec
- 	bool proportional_reclaim;
- 	struct blk_plug plug;
- 
--	if (lru_gen_enabled()) {
-+	if (lru_gen_enabled() && !global_reclaim(sc)) {
- 		lru_gen_shrink_lruvec(lruvec, sc);
- 		return;
- 	}
-@@ -6113,6 +6416,11 @@ static void shrink_node(pg_data_t *pgdat
- 	struct lruvec *target_lruvec;
- 	bool reclaimable = false;
- 
-+	if (lru_gen_enabled() && global_reclaim(sc)) {
-+		lru_gen_shrink_node(pgdat, sc);
-+		return;
-+	}
-+
- 	target_lruvec = mem_cgroup_lruvec(sc->target_mem_cgroup, pgdat);
- 
- again:
diff --git a/target/linux/generic/backport-6.1/020-v6.3-07-BACKPORT-mm-multi-gen-LRU-clarify-scan_control-flags.patch b/target/linux/generic/backport-6.1/020-v6.3-07-BACKPORT-mm-multi-gen-LRU-clarify-scan_control-flags.patch
deleted file mode 100644
index 079f4fd20289..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-07-BACKPORT-mm-multi-gen-LRU-clarify-scan_control-flags.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From 11b14ee8cbbbebd8204609076a9327a1171cd253 Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Wed, 21 Dec 2022 21:19:05 -0700
-Subject: [PATCH 07/19] BACKPORT: mm: multi-gen LRU: clarify scan_control flags
-
-Among the flags in scan_control:
-1. sc->may_swap, which indicates swap constraint due to memsw.max, is
-   supported as usual.
-2. sc->proactive, which indicates reclaim by memory.reclaim, may not
-   opportunistically skip the aging path, since it is considered less
-   latency sensitive.
-3. !(sc->gfp_mask & __GFP_IO), which indicates IO constraint, lowers
-   swappiness to prioritize file LRU, since clean file folios are more
-   likely to exist.
-4. sc->may_writepage and sc->may_unmap, which indicates opportunistic
-   reclaim, are rejected, since unmapped clean folios are already
-   prioritized. Scanning for more of them is likely futile and can
-   cause high reclaim latency when there is a large number of memcgs.
-
-The rest are handled by the existing code.
-
-Link: https://lkml.kernel.org/r/20221222041905.2431096-8-yuzhao@google.com
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Cc: Johannes Weiner <hannes@cmpxchg.org>
-Cc: Jonathan Corbet <corbet@lwn.net>
-Cc: Michael Larabel <Michael@MichaelLarabel.com>
-Cc: Michal Hocko <mhocko@kernel.org>
-Cc: Mike Rapoport <rppt@kernel.org>
-Cc: Roman Gushchin <roman.gushchin@linux.dev>
-Cc: Suren Baghdasaryan <surenb@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Bug: 274865848
-(cherry picked from commit e9d4e1ee788097484606c32122f146d802a9c5fb)
-[TJ: Resolved conflict with older function signature for min_cgroup_below_min, and over
-cdded861182142ac4488a4d64c571107aeb77f53 ("ANDROID: MGLRU: Don't skip anon reclaim if swap low")]
-Change-Id: Ic2e779eaf4e91a3921831b4e2fa10c740dc59d50
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- mm/vmscan.c | 55 +++++++++++++++++++++++++++--------------------------
- 1 file changed, 28 insertions(+), 27 deletions(-)
-
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -3185,6 +3185,9 @@ static int get_swappiness(struct lruvec
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
- 	struct pglist_data *pgdat = lruvec_pgdat(lruvec);
- 
-+	if (!sc->may_swap)
-+		return 0;
-+
- 	if (!can_demote(pgdat->node_id, sc) &&
- 	    mem_cgroup_get_nr_swap_pages(memcg) < MIN_LRU_BATCH)
- 		return 0;
-@@ -4223,7 +4226,7 @@ static void walk_mm(struct lruvec *lruve
- 	} while (err == -EAGAIN);
- }
- 
--static struct lru_gen_mm_walk *set_mm_walk(struct pglist_data *pgdat)
-+static struct lru_gen_mm_walk *set_mm_walk(struct pglist_data *pgdat, bool force_alloc)
- {
- 	struct lru_gen_mm_walk *walk = current->reclaim_state->mm_walk;
- 
-@@ -4231,7 +4234,7 @@ static struct lru_gen_mm_walk *set_mm_wa
- 		VM_WARN_ON_ONCE(walk);
- 
- 		walk = &pgdat->mm_walk;
--	} else if (!pgdat && !walk) {
-+	} else if (!walk && force_alloc) {
- 		VM_WARN_ON_ONCE(current_is_kswapd());
- 
- 		walk = kzalloc(sizeof(*walk), __GFP_HIGH | __GFP_NOMEMALLOC | __GFP_NOWARN);
-@@ -4419,7 +4422,7 @@ static bool try_to_inc_max_seq(struct lr
- 		goto done;
- 	}
- 
--	walk = set_mm_walk(NULL);
-+	walk = set_mm_walk(NULL, true);
- 	if (!walk) {
- 		success = iterate_mm_list_nowalk(lruvec, max_seq);
- 		goto done;
-@@ -4488,8 +4491,6 @@ static bool lruvec_is_reclaimable(struct
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
- 	DEFINE_MIN_SEQ(lruvec);
- 
--	VM_WARN_ON_ONCE(sc->memcg_low_reclaim);
--
- 	/* see the comment on lru_gen_folio */
- 	gen = lru_gen_from_seq(min_seq[LRU_GEN_FILE]);
- 	birth = READ_ONCE(lruvec->lrugen.timestamps[gen]);
-@@ -4753,12 +4754,8 @@ static bool isolate_folio(struct lruvec
- {
- 	bool success;
- 
--	/* unmapping inhibited */
--	if (!sc->may_unmap && folio_mapped(folio))
--		return false;
--
- 	/* swapping inhibited */
--	if (!(sc->may_writepage && (sc->gfp_mask & __GFP_IO)) &&
-+	if (!(sc->gfp_mask & __GFP_IO) &&
- 	    (folio_test_dirty(folio) ||
- 	     (folio_test_anon(folio) && !folio_test_swapcache(folio))))
- 		return false;
-@@ -4857,9 +4854,8 @@ static int scan_folios(struct lruvec *lr
- 	__count_vm_events(PGSCAN_ANON + type, isolated);
- 
- 	/*
--	 * There might not be eligible pages due to reclaim_idx, may_unmap and
--	 * may_writepage. Check the remaining to prevent livelock if it's not
--	 * making progress.
-+	 * There might not be eligible folios due to reclaim_idx. Check the
-+	 * remaining to prevent livelock if it's not making progress.
- 	 */
- 	return isolated || !remaining ? scanned : 0;
- }
-@@ -5118,8 +5114,7 @@ static long get_nr_to_scan(struct lruvec
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
- 	DEFINE_MAX_SEQ(lruvec);
- 
--	if (mem_cgroup_below_min(memcg) ||
--	    (mem_cgroup_below_low(memcg) && !sc->memcg_low_reclaim))
-+	if (mem_cgroup_below_min(memcg))
- 		return 0;
- 
- 	if (!should_run_aging(lruvec, max_seq, sc, can_swap, &nr_to_scan))
-@@ -5147,17 +5142,14 @@ static bool try_to_shrink_lruvec(struct
- 	long nr_to_scan;
- 	unsigned long scanned = 0;
- 	unsigned long nr_to_reclaim = get_nr_to_reclaim(sc);
-+	int swappiness = get_swappiness(lruvec, sc);
-+
-+	/* clean file folios are more likely to exist */
-+	if (swappiness && !(sc->gfp_mask & __GFP_IO))
-+		swappiness = 1;
- 
- 	while (true) {
- 		int delta;
--		int swappiness;
--
--		if (sc->may_swap)
--			swappiness = get_swappiness(lruvec, sc);
--		else if (!cgroup_reclaim(sc) && get_swappiness(lruvec, sc))
--			swappiness = 1;
--		else
--			swappiness = 0;
- 
- 		nr_to_scan = get_nr_to_scan(lruvec, sc, swappiness);
- 		if (nr_to_scan <= 0)
-@@ -5288,12 +5280,13 @@ static void lru_gen_shrink_lruvec(struct
- 	struct blk_plug plug;
- 
- 	VM_WARN_ON_ONCE(global_reclaim(sc));
-+	VM_WARN_ON_ONCE(!sc->may_writepage || !sc->may_unmap);
- 
- 	lru_add_drain();
- 
- 	blk_start_plug(&plug);
- 
--	set_mm_walk(lruvec_pgdat(lruvec));
-+	set_mm_walk(NULL, sc->proactive);
- 
- 	if (try_to_shrink_lruvec(lruvec, sc))
- 		lru_gen_rotate_memcg(lruvec, MEMCG_LRU_YOUNG);
-@@ -5349,11 +5342,19 @@ static void lru_gen_shrink_node(struct p
- 
- 	VM_WARN_ON_ONCE(!global_reclaim(sc));
- 
-+	/*
-+	 * Unmapped clean folios are already prioritized. Scanning for more of
-+	 * them is likely futile and can cause high reclaim latency when there
-+	 * is a large number of memcgs.
-+	 */
-+	if (!sc->may_writepage || !sc->may_unmap)
-+		goto done;
-+
- 	lru_add_drain();
- 
- 	blk_start_plug(&plug);
- 
--	set_mm_walk(pgdat);
-+	set_mm_walk(pgdat, sc->proactive);
- 
- 	set_initial_priority(pgdat, sc);
- 
-@@ -5371,7 +5372,7 @@ static void lru_gen_shrink_node(struct p
- 	clear_mm_walk();
- 
- 	blk_finish_plug(&plug);
--
-+done:
- 	/* kswapd should never fail */
- 	pgdat->kswapd_failures = 0;
- }
-@@ -5943,7 +5944,7 @@ static ssize_t lru_gen_seq_write(struct
- 	set_task_reclaim_state(current, &sc.reclaim_state);
- 	flags = memalloc_noreclaim_save();
- 	blk_start_plug(&plug);
--	if (!set_mm_walk(NULL)) {
-+	if (!set_mm_walk(NULL, true)) {
- 		err = -ENOMEM;
- 		goto done;
- 	}
diff --git a/target/linux/generic/backport-6.1/020-v6.3-08-UPSTREAM-mm-multi-gen-LRU-simplify-arch_has_hw_pte_y.patch b/target/linux/generic/backport-6.1/020-v6.3-08-UPSTREAM-mm-multi-gen-LRU-simplify-arch_has_hw_pte_y.patch
deleted file mode 100644
index 3cbc84f8b8e5..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-08-UPSTREAM-mm-multi-gen-LRU-simplify-arch_has_hw_pte_y.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 25887d48dff860751a06caa4188bfaf6bfb6e4b2 Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Wed, 21 Dec 2022 21:19:06 -0700
-Subject: [PATCH 08/19] UPSTREAM: mm: multi-gen LRU: simplify
- arch_has_hw_pte_young() check
-
-Scanning page tables when hardware does not set the accessed bit has
-no real use cases.
-
-Link: https://lkml.kernel.org/r/20221222041905.2431096-9-yuzhao@google.com
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Cc: Johannes Weiner <hannes@cmpxchg.org>
-Cc: Jonathan Corbet <corbet@lwn.net>
-Cc: Michael Larabel <Michael@MichaelLarabel.com>
-Cc: Michal Hocko <mhocko@kernel.org>
-Cc: Mike Rapoport <rppt@kernel.org>
-Cc: Roman Gushchin <roman.gushchin@linux.dev>
-Cc: Suren Baghdasaryan <surenb@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Bug: 274865848
-(cherry picked from commit f386e9314025ea99dae639ed2032560a92081430)
-Change-Id: I84d97ab665b4e3bb862a9bc7d72f50dea7191a6b
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- mm/vmscan.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -4417,7 +4417,7 @@ static bool try_to_inc_max_seq(struct lr
- 	 * handful of PTEs. Spreading the work out over a period of time usually
- 	 * is less efficient, but it avoids bursty page faults.
- 	 */
--	if (!force_scan && !(arch_has_hw_pte_young() && get_cap(LRU_GEN_MM_WALK))) {
-+	if (!arch_has_hw_pte_young() || !get_cap(LRU_GEN_MM_WALK)) {
- 		success = iterate_mm_list_nowalk(lruvec, max_seq);
- 		goto done;
- 	}
diff --git a/target/linux/generic/backport-6.1/020-v6.3-09-UPSTREAM-mm-multi-gen-LRU-avoid-futile-retries.patch b/target/linux/generic/backport-6.1/020-v6.3-09-UPSTREAM-mm-multi-gen-LRU-avoid-futile-retries.patch
deleted file mode 100644
index 2ed3f07bbf6c..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-09-UPSTREAM-mm-multi-gen-LRU-avoid-futile-retries.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 620b0ee94455e48d124414cd06d8a53f69fb6453 Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Mon, 13 Feb 2023 00:53:22 -0700
-Subject: [PATCH 09/19] UPSTREAM: mm: multi-gen LRU: avoid futile retries
-
-Recall that the per-node memcg LRU has two generations and they alternate
-when the last memcg (of a given node) is moved from one to the other.
-Each generation is also sharded into multiple bins to improve scalability.
-A reclaimer starts with a random bin (in the old generation) and, if it
-fails, it will retry, i.e., to try the rest of the bins.
-
-If a reclaimer fails with the last memcg, it should move this memcg to the
-young generation first, which causes the generations to alternate, and
-then retry.  Otherwise, the retries will be futile because all other bins
-are empty.
-
-Link: https://lkml.kernel.org/r/20230213075322.1416966-1-yuzhao@google.com
-Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Reported-by: T.J. Mercier <tjmercier@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Bug: 274865848
-(cherry picked from commit 9f550d78b40da21b4da515db4c37d8d7b12aa1a6)
-Change-Id: Ie92535676b005ec9e7987632b742fdde8d54436f
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- mm/vmscan.c | 25 +++++++++++++++----------
- 1 file changed, 15 insertions(+), 10 deletions(-)
-
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -5217,18 +5217,20 @@ static int shrink_one(struct lruvec *lru
- 
- static void shrink_many(struct pglist_data *pgdat, struct scan_control *sc)
- {
-+	int op;
- 	int gen;
- 	int bin;
- 	int first_bin;
- 	struct lruvec *lruvec;
- 	struct lru_gen_folio *lrugen;
-+	struct mem_cgroup *memcg;
- 	const struct hlist_nulls_node *pos;
--	int op = 0;
--	struct mem_cgroup *memcg = NULL;
- 	unsigned long nr_to_reclaim = get_nr_to_reclaim(sc);
- 
- 	bin = first_bin = get_random_u32_below(MEMCG_NR_BINS);
- restart:
-+	op = 0;
-+	memcg = NULL;
- 	gen = get_memcg_gen(READ_ONCE(pgdat->memcg_lru.seq));
- 
- 	rcu_read_lock();
-@@ -5252,14 +5254,22 @@ restart:
- 
- 		op = shrink_one(lruvec, sc);
- 
--		if (sc->nr_reclaimed >= nr_to_reclaim)
--			goto success;
--
- 		rcu_read_lock();
-+
-+		if (sc->nr_reclaimed >= nr_to_reclaim)
-+			break;
- 	}
- 
- 	rcu_read_unlock();
- 
-+	if (op)
-+		lru_gen_rotate_memcg(lruvec, op);
-+
-+	mem_cgroup_put(memcg);
-+
-+	if (sc->nr_reclaimed >= nr_to_reclaim)
-+		return;
-+
- 	/* restart if raced with lru_gen_rotate_memcg() */
- 	if (gen != get_nulls_value(pos))
- 		goto restart;
-@@ -5268,11 +5278,6 @@ restart:
- 	bin = get_memcg_bin(bin + 1);
- 	if (bin != first_bin)
- 		goto restart;
--success:
--	if (op)
--		lru_gen_rotate_memcg(lruvec, op);
--
--	mem_cgroup_put(memcg);
- }
- 
- static void lru_gen_shrink_lruvec(struct lruvec *lruvec, struct scan_control *sc)
diff --git a/target/linux/generic/backport-6.1/020-v6.3-10-UPSTREAM-mm-add-vma_has_recency.patch b/target/linux/generic/backport-6.1/020-v6.3-10-UPSTREAM-mm-add-vma_has_recency.patch
deleted file mode 100644
index 19d6e0a2077b..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-10-UPSTREAM-mm-add-vma_has_recency.patch
+++ /dev/null
@@ -1,191 +0,0 @@
-From 70d216c71ff5c5b17dd1da6294f97b91fb6aba7a Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Fri, 30 Dec 2022 14:52:51 -0700
-Subject: [PATCH 10/19] UPSTREAM: mm: add vma_has_recency()
-
-Add vma_has_recency() to indicate whether a VMA may exhibit temporal
-locality that the LRU algorithm relies on.
-
-This function returns false for VMAs marked by VM_SEQ_READ or
-VM_RAND_READ.  While the former flag indicates linear access, i.e., a
-special case of spatial locality, both flags indicate a lack of temporal
-locality, i.e., the reuse of an area within a relatively small duration.
-
-"Recency" is chosen over "locality" to avoid confusion between temporal
-and spatial localities.
-
-Before this patch, the active/inactive LRU only ignored the accessed bit
-from VMAs marked by VM_SEQ_READ.  After this patch, the active/inactive
-LRU and MGLRU share the same logic: they both ignore the accessed bit if
-vma_has_recency() returns false.
-
-For the active/inactive LRU, the following fio test showed a [6, 8]%
-increase in IOPS when randomly accessing mapped files under memory
-pressure.
-
-  kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo)
-  kb=$((kb - 8*1024*1024))
-
-  modprobe brd rd_nr=1 rd_size=$kb
-  dd if=/dev/zero of=/dev/ram0 bs=1M
-
-  mkfs.ext4 /dev/ram0
-  mount /dev/ram0 /mnt/
-  swapoff -a
-
-  fio --name=test --directory=/mnt/ --ioengine=mmap --numjobs=8 \
-      --size=8G --rw=randrw --time_based --runtime=10m \
-      --group_reporting
-
-The discussion that led to this patch is here [1].  Additional test
-results are available in that thread.
-
-[1] https://lore.kernel.org/r/Y31s%2FK8T85jh05wH@google.com/
-
-Link: https://lkml.kernel.org/r/20221230215252.2628425-1-yuzhao@google.com
-Change-Id: I291dcb795197659e40e46539cd32b857677c34ad
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Cc: Alexander Viro <viro@zeniv.linux.org.uk>
-Cc: Andrea Righi <andrea.righi@canonical.com>
-Cc: Johannes Weiner <hannes@cmpxchg.org>
-Cc: Michael Larabel <Michael@MichaelLarabel.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-(cherry picked from commit 8788f6781486769d9598dcaedc3fe0eb12fc3e59)
-Bug: 274865848
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- include/linux/mm_inline.h |  8 ++++++++
- mm/memory.c               |  7 +++----
- mm/rmap.c                 | 42 +++++++++++++++++----------------------
- mm/vmscan.c               |  5 ++++-
- 4 files changed, 33 insertions(+), 29 deletions(-)
-
---- a/include/linux/mm_inline.h
-+++ b/include/linux/mm_inline.h
-@@ -600,4 +600,12 @@ pte_install_uffd_wp_if_needed(struct vm_
- #endif
- }
- 
-+static inline bool vma_has_recency(struct vm_area_struct *vma)
-+{
-+	if (vma->vm_flags & (VM_SEQ_READ | VM_RAND_READ))
-+		return false;
-+
-+	return true;
-+}
-+
- #endif
---- a/mm/memory.c
-+++ b/mm/memory.c
-@@ -1445,8 +1445,7 @@ again:
- 					force_flush = 1;
- 					set_page_dirty(page);
- 				}
--				if (pte_young(ptent) &&
--				    likely(!(vma->vm_flags & VM_SEQ_READ)))
-+				if (pte_young(ptent) && likely(vma_has_recency(vma)))
- 					mark_page_accessed(page);
- 			}
- 			rss[mm_counter(page)]--;
-@@ -5218,8 +5217,8 @@ static inline void mm_account_fault(stru
- #ifdef CONFIG_LRU_GEN
- static void lru_gen_enter_fault(struct vm_area_struct *vma)
- {
--	/* the LRU algorithm doesn't apply to sequential or random reads */
--	current->in_lru_fault = !(vma->vm_flags & (VM_SEQ_READ | VM_RAND_READ));
-+	/* the LRU algorithm only applies to accesses with recency */
-+	current->in_lru_fault = vma_has_recency(vma);
- }
- 
- static void lru_gen_exit_fault(void)
---- a/mm/rmap.c
-+++ b/mm/rmap.c
-@@ -823,25 +823,14 @@ static bool folio_referenced_one(struct
- 		}
- 
- 		if (pvmw.pte) {
--			if (lru_gen_enabled() && pte_young(*pvmw.pte) &&
--			    !(vma->vm_flags & (VM_SEQ_READ | VM_RAND_READ))) {
-+			if (lru_gen_enabled() && pte_young(*pvmw.pte)) {
- 				lru_gen_look_around(&pvmw);
- 				referenced++;
- 			}
- 
- 			if (ptep_clear_flush_young_notify(vma, address,
--						pvmw.pte)) {
--				/*
--				 * Don't treat a reference through
--				 * a sequentially read mapping as such.
--				 * If the folio has been used in another mapping,
--				 * we will catch it; if this other mapping is
--				 * already gone, the unmap path will have set
--				 * the referenced flag or activated the folio.
--				 */
--				if (likely(!(vma->vm_flags & VM_SEQ_READ)))
--					referenced++;
--			}
-+						pvmw.pte))
-+				referenced++;
- 		} else if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
- 			if (pmdp_clear_flush_young_notify(vma, address,
- 						pvmw.pmd))
-@@ -875,7 +864,20 @@ static bool invalid_folio_referenced_vma
- 	struct folio_referenced_arg *pra = arg;
- 	struct mem_cgroup *memcg = pra->memcg;
- 
--	if (!mm_match_cgroup(vma->vm_mm, memcg))
-+	/*
-+	 * Ignore references from this mapping if it has no recency. If the
-+	 * folio has been used in another mapping, we will catch it; if this
-+	 * other mapping is already gone, the unmap path will have set the
-+	 * referenced flag or activated the folio in zap_pte_range().
-+	 */
-+	if (!vma_has_recency(vma))
-+		return true;
-+
-+	/*
-+	 * If we are reclaiming on behalf of a cgroup, skip counting on behalf
-+	 * of references from different cgroups.
-+	 */
-+	if (memcg && !mm_match_cgroup(vma->vm_mm, memcg))
- 		return true;
- 
- 	return false;
-@@ -906,6 +908,7 @@ int folio_referenced(struct folio *folio
- 		.arg = (void *)&pra,
- 		.anon_lock = folio_lock_anon_vma_read,
- 		.try_lock = true,
-+		.invalid_vma = invalid_folio_referenced_vma,
- 	};
- 
- 	*vm_flags = 0;
-@@ -921,15 +924,6 @@ int folio_referenced(struct folio *folio
- 			return 1;
- 	}
- 
--	/*
--	 * If we are reclaiming on behalf of a cgroup, skip
--	 * counting on behalf of references from different
--	 * cgroups
--	 */
--	if (memcg) {
--		rwc.invalid_vma = invalid_folio_referenced_vma;
--	}
--
- 	rmap_walk(folio, &rwc);
- 	*vm_flags = pra.vm_flags;
- 
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -3778,7 +3778,10 @@ static int should_skip_vma(unsigned long
- 	if (is_vm_hugetlb_page(vma))
- 		return true;
- 
--	if (vma->vm_flags & (VM_LOCKED | VM_SPECIAL | VM_SEQ_READ | VM_RAND_READ))
-+	if (!vma_has_recency(vma))
-+		return true;
-+
-+	if (vma->vm_flags & (VM_LOCKED | VM_SPECIAL))
- 		return true;
- 
- 	if (vma == get_gate_vma(vma->vm_mm))
diff --git a/target/linux/generic/backport-6.1/020-v6.3-11-UPSTREAM-mm-support-POSIX_FADV_NOREUSE.patch b/target/linux/generic/backport-6.1/020-v6.3-11-UPSTREAM-mm-support-POSIX_FADV_NOREUSE.patch
deleted file mode 100644
index f9c39be920cc..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-11-UPSTREAM-mm-support-POSIX_FADV_NOREUSE.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 9ca4e437a24dfc4ec6c362f319eb9850b9eca497 Mon Sep 17 00:00:00 2001
-From: Yu Zhao <yuzhao@google.com>
-Date: Fri, 30 Dec 2022 14:52:52 -0700
-Subject: [PATCH 11/19] UPSTREAM: mm: support POSIX_FADV_NOREUSE
-
-This patch adds POSIX_FADV_NOREUSE to vma_has_recency() so that the LRU
-algorithm can ignore access to mapped files marked by this flag.
-
-The advantages of POSIX_FADV_NOREUSE are:
-1. Unlike MADV_SEQUENTIAL and MADV_RANDOM, it does not alter the
-   default readahead behavior.
-2. Unlike MADV_SEQUENTIAL and MADV_RANDOM, it does not split VMAs and
-   therefore does not take mmap_lock.
-3. Unlike MADV_COLD, setting it has a negligible cost, regardless of
-   how many pages it affects.
-
-Its limitations are:
-1. Like POSIX_FADV_RANDOM and POSIX_FADV_SEQUENTIAL, it currently does
-   not support range. IOW, its scope is the entire file.
-2. It currently does not ignore access through file descriptors.
-   Specifically, for the active/inactive LRU, given a file page shared
-   by two users and one of them having set POSIX_FADV_NOREUSE on the
-   file, this page will be activated upon the second user accessing
-   it. This corner case can be covered by checking POSIX_FADV_NOREUSE
-   before calling folio_mark_accessed() on the read path. But it is
-   considered not worth the effort.
-
-There have been a few attempts to support POSIX_FADV_NOREUSE, e.g., [1].
-This time the goal is to fill a niche: a few desktop applications, e.g.,
-large file transferring and video encoding/decoding, want fast file
-streaming with mmap() rather than direct IO.  Among those applications, an
-SVT-AV1 regression was reported when running with MGLRU [2].  The
-following test can reproduce that regression.
-
-  kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo)
-  kb=$((kb - 8*1024*1024))
-
-  modprobe brd rd_nr=1 rd_size=$kb
-  dd if=/dev/zero of=/dev/ram0 bs=1M
-
-  mkfs.ext4 /dev/ram0
-  mount /dev/ram0 /mnt/
-  swapoff -a
-
-  fallocate -l 8G /mnt/swapfile
-  mkswap /mnt/swapfile
-  swapon /mnt/swapfile
-
-  wget http://ultravideo.cs.tut.fi/video/Bosphorus_3840x2160_120fps_420_8bit_YUV_Y4M.7z
-  7z e -o/mnt/ Bosphorus_3840x2160_120fps_420_8bit_YUV_Y4M.7z
-  SvtAv1EncApp --preset 12 -w 3840 -h 2160 \
-               -i /mnt/Bosphorus_3840x2160.y4m
-
-For MGLRU, the following change showed a [9-11]% increase in FPS,
-which makes it on par with the active/inactive LRU.
-
-  patch Source/App/EncApp/EbAppMain.c <<EOF
-  31a32
-  > #include <fcntl.h>
-  35d35
-  < #include <fcntl.h> /* _O_BINARY */
-  117a118
-  >             posix_fadvise(config->mmap.fd, 0, 0, POSIX_FADV_NOREUSE);
-  EOF
-
-[1] https://lore.kernel.org/r/1308923350-7932-1-git-send-email-andrea@betterlinux.com/
-[2] https://openbenchmarking.org/result/2209259-PTS-MGLRU8GB57
-
-Link: https://lkml.kernel.org/r/20221230215252.2628425-2-yuzhao@google.com
-Change-Id: I0b7f5f971d78014ea1ba44cee6a8ec902a4330d0
-Signed-off-by: Yu Zhao <yuzhao@google.com>
-Cc: Alexander Viro <viro@zeniv.linux.org.uk>
-Cc: Andrea Righi <andrea.righi@canonical.com>
-Cc: Johannes Weiner <hannes@cmpxchg.org>
-Cc: Michael Larabel <Michael@MichaelLarabel.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-(cherry picked from commit 17e810229cb3068b692fa078bd9b3a6527e0866a)
-Bug: 274865848
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- include/linux/fs.h        | 2 ++
- include/linux/mm_inline.h | 3 +++
- mm/fadvise.c              | 5 ++++-
- 3 files changed, 9 insertions(+), 1 deletion(-)
-
---- a/include/linux/fs.h
-+++ b/include/linux/fs.h
-@@ -166,6 +166,8 @@ typedef int (dio_iodone_t)(struct kiocb
- /* File supports DIRECT IO */
- #define	FMODE_CAN_ODIRECT	((__force fmode_t)0x400000)
- 
-+#define	FMODE_NOREUSE		((__force fmode_t)0x800000)
-+
- /* File was opened by fanotify and shouldn't generate fanotify events */
- #define FMODE_NONOTIFY		((__force fmode_t)0x4000000)
- 
---- a/include/linux/mm_inline.h
-+++ b/include/linux/mm_inline.h
-@@ -605,6 +605,9 @@ static inline bool vma_has_recency(struc
- 	if (vma->vm_flags & (VM_SEQ_READ | VM_RAND_READ))
- 		return false;
- 
-+	if (vma->vm_file && (vma->vm_file->f_mode & FMODE_NOREUSE))
-+		return false;
-+
- 	return true;
- }
- 
---- a/mm/fadvise.c
-+++ b/mm/fadvise.c
-@@ -80,7 +80,7 @@ int generic_fadvise(struct file *file, l
- 	case POSIX_FADV_NORMAL:
- 		file->f_ra.ra_pages = bdi->ra_pages;
- 		spin_lock(&file->f_lock);
--		file->f_mode &= ~FMODE_RANDOM;
-+		file->f_mode &= ~(FMODE_RANDOM | FMODE_NOREUSE);
- 		spin_unlock(&file->f_lock);
- 		break;
- 	case POSIX_FADV_RANDOM:
-@@ -107,6 +107,9 @@ int generic_fadvise(struct file *file, l
- 		force_page_cache_readahead(mapping, file, start_index, nrpages);
- 		break;
- 	case POSIX_FADV_NOREUSE:
-+		spin_lock(&file->f_lock);
-+		file->f_mode |= FMODE_NOREUSE;
-+		spin_unlock(&file->f_lock);
- 		break;
- 	case POSIX_FADV_DONTNEED:
- 		__filemap_fdatawrite_range(mapping, offset, endbyte,
diff --git a/target/linux/generic/backport-6.1/020-v6.3-12-UPSTREAM-mm-multi-gen-LRU-section-for-working-set-pr.patch b/target/linux/generic/backport-6.1/020-v6.3-12-UPSTREAM-mm-multi-gen-LRU-section-for-working-set-pr.patch
deleted file mode 100644
index bac2e3e34409..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-12-UPSTREAM-mm-multi-gen-LRU-section-for-working-set-pr.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 1b5e4c317d80f4826eceb3781702d18d06b14394 Mon Sep 17 00:00:00 2001
-From: "T.J. Alumbaugh" <talumbau@google.com>
-Date: Wed, 18 Jan 2023 00:18:21 +0000
-Subject: [PATCH 12/19] UPSTREAM: mm: multi-gen LRU: section for working set
- protection
-
-Patch series "mm: multi-gen LRU: improve".
-
-This patch series improves a few MGLRU functions, collects related
-functions, and adds additional documentation.
-
-This patch (of 7):
-
-Add a section for working set protection in the code and the design doc.
-The admin doc already contains its usage.
-
-Link: https://lkml.kernel.org/r/20230118001827.1040870-1-talumbau@google.com
-Link: https://lkml.kernel.org/r/20230118001827.1040870-2-talumbau@google.com
-Change-Id: I65599075fd42951db7739a2ab7cee78516e157b3
-Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
-Cc: Yu Zhao <yuzhao@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-(cherry picked from commit 7b8144e63d84716f16a1b929e0c7e03ae5c4d5c1)
-Bug: 274865848
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- Documentation/mm/multigen_lru.rst | 15 +++++++++++++++
- mm/vmscan.c                       |  4 ++++
- 2 files changed, 19 insertions(+)
-
---- a/Documentation/mm/multigen_lru.rst
-+++ b/Documentation/mm/multigen_lru.rst
-@@ -141,6 +141,21 @@ loop has detected outlying refaults from
- this end, the feedback loop uses the first tier as the baseline, for
- the reason stated earlier.
- 
-+Working set protection
-+----------------------
-+Each generation is timestamped at birth. If ``lru_gen_min_ttl`` is
-+set, an ``lruvec`` is protected from the eviction when its oldest
-+generation was born within ``lru_gen_min_ttl`` milliseconds. In other
-+words, it prevents the working set of ``lru_gen_min_ttl`` milliseconds
-+from getting evicted. The OOM killer is triggered if this working set
-+cannot be kept in memory.
-+
-+This time-based approach has the following advantages:
-+
-+1. It is easier to configure because it is agnostic to applications
-+   and memory sizes.
-+2. It is more reliable because it is directly wired to the OOM killer.
-+
- Summary
- -------
- The multi-gen LRU can be disassembled into the following parts:
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -4461,6 +4461,10 @@ done:
- 	return true;
- }
- 
-+/******************************************************************************
-+ *                          working set protection
-+ ******************************************************************************/
-+
- static bool lruvec_is_sizable(struct lruvec *lruvec, struct scan_control *sc)
- {
- 	int gen, type, zone;
diff --git a/target/linux/generic/backport-6.1/020-v6.3-13-UPSTREAM-mm-multi-gen-LRU-section-for-rmap-PT-walk-f.patch b/target/linux/generic/backport-6.1/020-v6.3-13-UPSTREAM-mm-multi-gen-LRU-section-for-rmap-PT-walk-f.patch
deleted file mode 100644
index c28a1c5d5b9b..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-13-UPSTREAM-mm-multi-gen-LRU-section-for-rmap-PT-walk-f.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 5ddf9d53d375e42af49b744bd7c2f8247c6bce15 Mon Sep 17 00:00:00 2001
-From: "T.J. Alumbaugh" <talumbau@google.com>
-Date: Wed, 18 Jan 2023 00:18:22 +0000
-Subject: [PATCH 13/19] UPSTREAM: mm: multi-gen LRU: section for rmap/PT walk
- feedback
-
-Add a section for lru_gen_look_around() in the code and the design doc.
-
-Link: https://lkml.kernel.org/r/20230118001827.1040870-3-talumbau@google.com
-Change-Id: I5097af63f61b3b69ec2abee6cdbdc33c296df213
-Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
-Cc: Yu Zhao <yuzhao@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-(cherry picked from commit db19a43d9b3a8876552f00f656008206ef9a5efa)
-Bug: 274865848
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- Documentation/mm/multigen_lru.rst | 14 ++++++++++++++
- mm/vmscan.c                       |  4 ++++
- 2 files changed, 18 insertions(+)
-
---- a/Documentation/mm/multigen_lru.rst
-+++ b/Documentation/mm/multigen_lru.rst
-@@ -156,6 +156,20 @@ This time-based approach has the followi
-    and memory sizes.
- 2. It is more reliable because it is directly wired to the OOM killer.
- 
-+Rmap/PT walk feedback
-+---------------------
-+Searching the rmap for PTEs mapping each page on an LRU list (to test
-+and clear the accessed bit) can be expensive because pages from
-+different VMAs (PA space) are not cache friendly to the rmap (VA
-+space). For workloads mostly using mapped pages, searching the rmap
-+can incur the highest CPU cost in the reclaim path.
-+
-+``lru_gen_look_around()`` exploits spatial locality to reduce the
-+trips into the rmap. It scans the adjacent PTEs of a young PTE and
-+promotes hot pages. If the scan was done cacheline efficiently, it
-+adds the PMD entry pointing to the PTE table to the Bloom filter. This
-+forms a feedback loop between the eviction and the aging.
-+
- Summary
- -------
- The multi-gen LRU can be disassembled into the following parts:
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -4555,6 +4555,10 @@ static void lru_gen_age_node(struct pgli
- 	}
- }
- 
-+/******************************************************************************
-+ *                          rmap/PT walk feedback
-+ ******************************************************************************/
-+
- /*
-  * This function exploits spatial locality when shrink_folio_list() walks the
-  * rmap. It scans the adjacent PTEs of a young PTE and promotes hot pages. If
diff --git a/target/linux/generic/backport-6.1/020-v6.3-14-UPSTREAM-mm-multi-gen-LRU-section-for-Bloom-filters.patch b/target/linux/generic/backport-6.1/020-v6.3-14-UPSTREAM-mm-multi-gen-LRU-section-for-Bloom-filters.patch
deleted file mode 100644
index a7dfb5ffe796..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-14-UPSTREAM-mm-multi-gen-LRU-section-for-Bloom-filters.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-From 397624e12244ec038f51cb1f178ccb7a2ec562e5 Mon Sep 17 00:00:00 2001
-From: "T.J. Alumbaugh" <talumbau@google.com>
-Date: Wed, 18 Jan 2023 00:18:23 +0000
-Subject: [PATCH 14/19] UPSTREAM: mm: multi-gen LRU: section for Bloom filters
-
-Move Bloom filters code into a dedicated section.  Improve the design doc
-to explain Bloom filter usage and connection between aging and eviction in
-their use.
-
-Link: https://lkml.kernel.org/r/20230118001827.1040870-4-talumbau@google.com
-Change-Id: I73e866f687c1ed9f5c8538086aa39408b79897db
-Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
-Cc: Yu Zhao <yuzhao@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-(cherry picked from commit ccbbbb85945d8f0255aa9dbc1b617017e2294f2c)
-Bug: 274865848
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- Documentation/mm/multigen_lru.rst |  16 +++
- mm/vmscan.c                       | 180 +++++++++++++++---------------
- 2 files changed, 108 insertions(+), 88 deletions(-)
-
---- a/Documentation/mm/multigen_lru.rst
-+++ b/Documentation/mm/multigen_lru.rst
-@@ -170,6 +170,22 @@ promotes hot pages. If the scan was done
- adds the PMD entry pointing to the PTE table to the Bloom filter. This
- forms a feedback loop between the eviction and the aging.
- 
-+Bloom Filters
-+-------------
-+Bloom filters are a space and memory efficient data structure for set
-+membership test, i.e., test if an element is not in the set or may be
-+in the set.
-+
-+In the eviction path, specifically, in ``lru_gen_look_around()``, if a
-+PMD has a sufficient number of hot pages, its address is placed in the
-+filter. In the aging path, set membership means that the PTE range
-+will be scanned for young pages.
-+
-+Note that Bloom filters are probabilistic on set membership. If a test
-+is false positive, the cost is an additional scan of a range of PTEs,
-+which may yield hot pages anyway. Parameters of the filter itself can
-+control the false positive rate in the limit.
-+
- Summary
- -------
- The multi-gen LRU can be disassembled into the following parts:
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -3209,6 +3209,98 @@ static bool __maybe_unused seq_is_valid(
- }
- 
- /******************************************************************************
-+ *                          Bloom filters
-+ ******************************************************************************/
-+
-+/*
-+ * Bloom filters with m=1<<15, k=2 and the false positive rates of ~1/5 when
-+ * n=10,000 and ~1/2 when n=20,000, where, conventionally, m is the number of
-+ * bits in a bitmap, k is the number of hash functions and n is the number of
-+ * inserted items.
-+ *
-+ * Page table walkers use one of the two filters to reduce their search space.
-+ * To get rid of non-leaf entries that no longer have enough leaf entries, the
-+ * aging uses the double-buffering technique to flip to the other filter each
-+ * time it produces a new generation. For non-leaf entries that have enough
-+ * leaf entries, the aging carries them over to the next generation in
-+ * walk_pmd_range(); the eviction also report them when walking the rmap
-+ * in lru_gen_look_around().
-+ *
-+ * For future optimizations:
-+ * 1. It's not necessary to keep both filters all the time. The spare one can be
-+ *    freed after the RCU grace period and reallocated if needed again.
-+ * 2. And when reallocating, it's worth scaling its size according to the number
-+ *    of inserted entries in the other filter, to reduce the memory overhead on
-+ *    small systems and false positives on large systems.
-+ * 3. Jenkins' hash function is an alternative to Knuth's.
-+ */
-+#define BLOOM_FILTER_SHIFT	15
-+
-+static inline int filter_gen_from_seq(unsigned long seq)
-+{
-+	return seq % NR_BLOOM_FILTERS;
-+}
-+
-+static void get_item_key(void *item, int *key)
-+{
-+	u32 hash = hash_ptr(item, BLOOM_FILTER_SHIFT * 2);
-+
-+	BUILD_BUG_ON(BLOOM_FILTER_SHIFT * 2 > BITS_PER_TYPE(u32));
-+
-+	key[0] = hash & (BIT(BLOOM_FILTER_SHIFT) - 1);
-+	key[1] = hash >> BLOOM_FILTER_SHIFT;
-+}
-+
-+static bool test_bloom_filter(struct lruvec *lruvec, unsigned long seq, void *item)
-+{
-+	int key[2];
-+	unsigned long *filter;
-+	int gen = filter_gen_from_seq(seq);
-+
-+	filter = READ_ONCE(lruvec->mm_state.filters[gen]);
-+	if (!filter)
-+		return true;
-+
-+	get_item_key(item, key);
-+
-+	return test_bit(key[0], filter) && test_bit(key[1], filter);
-+}
-+
-+static void update_bloom_filter(struct lruvec *lruvec, unsigned long seq, void *item)
-+{
-+	int key[2];
-+	unsigned long *filter;
-+	int gen = filter_gen_from_seq(seq);
-+
-+	filter = READ_ONCE(lruvec->mm_state.filters[gen]);
-+	if (!filter)
-+		return;
-+
-+	get_item_key(item, key);
-+
-+	if (!test_bit(key[0], filter))
-+		set_bit(key[0], filter);
-+	if (!test_bit(key[1], filter))
-+		set_bit(key[1], filter);
-+}
-+
-+static void reset_bloom_filter(struct lruvec *lruvec, unsigned long seq)
-+{
-+	unsigned long *filter;
-+	int gen = filter_gen_from_seq(seq);
-+
-+	filter = lruvec->mm_state.filters[gen];
-+	if (filter) {
-+		bitmap_clear(filter, 0, BIT(BLOOM_FILTER_SHIFT));
-+		return;
-+	}
-+
-+	filter = bitmap_zalloc(BIT(BLOOM_FILTER_SHIFT),
-+			       __GFP_HIGH | __GFP_NOMEMALLOC | __GFP_NOWARN);
-+	WRITE_ONCE(lruvec->mm_state.filters[gen], filter);
-+}
-+
-+/******************************************************************************
-  *                          mm_struct list
-  ******************************************************************************/
- 
-@@ -3333,94 +3425,6 @@ void lru_gen_migrate_mm(struct mm_struct
- }
- #endif
- 
--/*
-- * Bloom filters with m=1<<15, k=2 and the false positive rates of ~1/5 when
-- * n=10,000 and ~1/2 when n=20,000, where, conventionally, m is the number of
-- * bits in a bitmap, k is the number of hash functions and n is the number of
-- * inserted items.
-- *
-- * Page table walkers use one of the two filters to reduce their search space.
-- * To get rid of non-leaf entries that no longer have enough leaf entries, the
-- * aging uses the double-buffering technique to flip to the other filter each
-- * time it produces a new generation. For non-leaf entries that have enough
-- * leaf entries, the aging carries them over to the next generation in
-- * walk_pmd_range(); the eviction also report them when walking the rmap
-- * in lru_gen_look_around().
-- *
-- * For future optimizations:
-- * 1. It's not necessary to keep both filters all the time. The spare one can be
-- *    freed after the RCU grace period and reallocated if needed again.
-- * 2. And when reallocating, it's worth scaling its size according to the number
-- *    of inserted entries in the other filter, to reduce the memory overhead on
-- *    small systems and false positives on large systems.
-- * 3. Jenkins' hash function is an alternative to Knuth's.
-- */
--#define BLOOM_FILTER_SHIFT	15
--
--static inline int filter_gen_from_seq(unsigned long seq)
--{
--	return seq % NR_BLOOM_FILTERS;
--}
--
--static void get_item_key(void *item, int *key)
--{
--	u32 hash = hash_ptr(item, BLOOM_FILTER_SHIFT * 2);
--
--	BUILD_BUG_ON(BLOOM_FILTER_SHIFT * 2 > BITS_PER_TYPE(u32));
--
--	key[0] = hash & (BIT(BLOOM_FILTER_SHIFT) - 1);
--	key[1] = hash >> BLOOM_FILTER_SHIFT;
--}
--
--static void reset_bloom_filter(struct lruvec *lruvec, unsigned long seq)
--{
--	unsigned long *filter;
--	int gen = filter_gen_from_seq(seq);
--
--	filter = lruvec->mm_state.filters[gen];
--	if (filter) {
--		bitmap_clear(filter, 0, BIT(BLOOM_FILTER_SHIFT));
--		return;
--	}
--
--	filter = bitmap_zalloc(BIT(BLOOM_FILTER_SHIFT),
--			       __GFP_HIGH | __GFP_NOMEMALLOC | __GFP_NOWARN);
--	WRITE_ONCE(lruvec->mm_state.filters[gen], filter);
--}
--
--static void update_bloom_filter(struct lruvec *lruvec, unsigned long seq, void *item)
--{
--	int key[2];
--	unsigned long *filter;
--	int gen = filter_gen_from_seq(seq);
--
--	filter = READ_ONCE(lruvec->mm_state.filters[gen]);
--	if (!filter)
--		return;
--
--	get_item_key(item, key);
--
--	if (!test_bit(key[0], filter))
--		set_bit(key[0], filter);
--	if (!test_bit(key[1], filter))
--		set_bit(key[1], filter);
--}
--
--static bool test_bloom_filter(struct lruvec *lruvec, unsigned long seq, void *item)
--{
--	int key[2];
--	unsigned long *filter;
--	int gen = filter_gen_from_seq(seq);
--
--	filter = READ_ONCE(lruvec->mm_state.filters[gen]);
--	if (!filter)
--		return true;
--
--	get_item_key(item, key);
--
--	return test_bit(key[0], filter) && test_bit(key[1], filter);
--}
--
- static void reset_mm_stats(struct lruvec *lruvec, struct lru_gen_mm_walk *walk, bool last)
- {
- 	int i;
diff --git a/target/linux/generic/backport-6.1/020-v6.3-15-UPSTREAM-mm-multi-gen-LRU-section-for-memcg-LRU.patch b/target/linux/generic/backport-6.1/020-v6.3-15-UPSTREAM-mm-multi-gen-LRU-section-for-memcg-LRU.patch
deleted file mode 100644
index 11c1b43db969..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-15-UPSTREAM-mm-multi-gen-LRU-section-for-memcg-LRU.patch
+++ /dev/null
@@ -1,427 +0,0 @@
-From 48c916b812652f9453be5bd45a703728926d41ca Mon Sep 17 00:00:00 2001
-From: "T.J. Alumbaugh" <talumbau@google.com>
-Date: Wed, 18 Jan 2023 00:18:24 +0000
-Subject: [PATCH 15/19] UPSTREAM: mm: multi-gen LRU: section for memcg LRU
-
-Move memcg LRU code into a dedicated section.  Improve the design doc to
-outline its architecture.
-
-Link: https://lkml.kernel.org/r/20230118001827.1040870-5-talumbau@google.com
-Change-Id: Id252e420cff7a858acb098cf2b3642da5c40f602
-Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
-Cc: Yu Zhao <yuzhao@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-(cherry picked from commit 36c7b4db7c942ae9e1b111f0c6b468c8b2e33842)
-Bug: 274865848
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- Documentation/mm/multigen_lru.rst |  33 +++-
- include/linux/mm_inline.h         |  17 --
- include/linux/mmzone.h            |  13 +-
- mm/memcontrol.c                   |   8 +-
- mm/vmscan.c                       | 250 +++++++++++++++++-------------
- 5 files changed, 178 insertions(+), 143 deletions(-)
-
---- a/Documentation/mm/multigen_lru.rst
-+++ b/Documentation/mm/multigen_lru.rst
-@@ -186,9 +186,40 @@ is false positive, the cost is an additi
- which may yield hot pages anyway. Parameters of the filter itself can
- control the false positive rate in the limit.
- 
-+Memcg LRU
-+---------
-+An memcg LRU is a per-node LRU of memcgs. It is also an LRU of LRUs,
-+since each node and memcg combination has an LRU of folios (see
-+``mem_cgroup_lruvec()``). Its goal is to improve the scalability of
-+global reclaim, which is critical to system-wide memory overcommit in
-+data centers. Note that memcg LRU only applies to global reclaim.
-+
-+The basic structure of an memcg LRU can be understood by an analogy to
-+the active/inactive LRU (of folios):
-+
-+1. It has the young and the old (generations), i.e., the counterparts
-+   to the active and the inactive;
-+2. The increment of ``max_seq`` triggers promotion, i.e., the
-+   counterpart to activation;
-+3. Other events trigger similar operations, e.g., offlining an memcg
-+   triggers demotion, i.e., the counterpart to deactivation.
-+
-+In terms of global reclaim, it has two distinct features:
-+
-+1. Sharding, which allows each thread to start at a random memcg (in
-+   the old generation) and improves parallelism;
-+2. Eventual fairness, which allows direct reclaim to bail out at will
-+   and reduces latency without affecting fairness over some time.
-+
-+In terms of traversing memcgs during global reclaim, it improves the
-+best-case complexity from O(n) to O(1) and does not affect the
-+worst-case complexity O(n). Therefore, on average, it has a sublinear
-+complexity.
-+
- Summary
- -------
--The multi-gen LRU can be disassembled into the following parts:
-+The multi-gen LRU (of folios) can be disassembled into the following
-+parts:
- 
- * Generations
- * Rmap walks
---- a/include/linux/mm_inline.h
-+++ b/include/linux/mm_inline.h
-@@ -122,18 +122,6 @@ static inline bool lru_gen_in_fault(void
- 	return current->in_lru_fault;
- }
- 
--#ifdef CONFIG_MEMCG
--static inline int lru_gen_memcg_seg(struct lruvec *lruvec)
--{
--	return READ_ONCE(lruvec->lrugen.seg);
--}
--#else
--static inline int lru_gen_memcg_seg(struct lruvec *lruvec)
--{
--	return 0;
--}
--#endif
--
- static inline int lru_gen_from_seq(unsigned long seq)
- {
- 	return seq % MAX_NR_GENS;
-@@ -314,11 +302,6 @@ static inline bool lru_gen_in_fault(void
- 	return false;
- }
- 
--static inline int lru_gen_memcg_seg(struct lruvec *lruvec)
--{
--	return 0;
--}
--
- static inline bool lru_gen_add_folio(struct lruvec *lruvec, struct folio *folio, bool reclaiming)
- {
- 	return false;
---- a/include/linux/mmzone.h
-+++ b/include/linux/mmzone.h
-@@ -368,15 +368,6 @@ struct page_vma_mapped_walk;
- #define LRU_GEN_MASK		((BIT(LRU_GEN_WIDTH) - 1) << LRU_GEN_PGOFF)
- #define LRU_REFS_MASK		((BIT(LRU_REFS_WIDTH) - 1) << LRU_REFS_PGOFF)
- 
--/* see the comment on MEMCG_NR_GENS */
--enum {
--	MEMCG_LRU_NOP,
--	MEMCG_LRU_HEAD,
--	MEMCG_LRU_TAIL,
--	MEMCG_LRU_OLD,
--	MEMCG_LRU_YOUNG,
--};
--
- #ifdef CONFIG_LRU_GEN
- 
- enum {
-@@ -557,7 +548,7 @@ void lru_gen_exit_memcg(struct mem_cgrou
- void lru_gen_online_memcg(struct mem_cgroup *memcg);
- void lru_gen_offline_memcg(struct mem_cgroup *memcg);
- void lru_gen_release_memcg(struct mem_cgroup *memcg);
--void lru_gen_rotate_memcg(struct lruvec *lruvec, int op);
-+void lru_gen_soft_reclaim(struct lruvec *lruvec);
- 
- #else /* !CONFIG_MEMCG */
- 
-@@ -608,7 +599,7 @@ static inline void lru_gen_release_memcg
- {
- }
- 
--static inline void lru_gen_rotate_memcg(struct lruvec *lruvec, int op)
-+static inline void lru_gen_soft_reclaim(struct lruvec *lruvec)
- {
- }
- 
---- a/mm/memcontrol.c
-+++ b/mm/memcontrol.c
-@@ -478,12 +478,8 @@ static void mem_cgroup_update_tree(struc
- 	struct mem_cgroup_tree_per_node *mctz;
- 
- 	if (lru_gen_enabled()) {
--		struct lruvec *lruvec = &memcg->nodeinfo[nid]->lruvec;
--
--		/* see the comment on MEMCG_NR_GENS */
--		if (soft_limit_excess(memcg) && lru_gen_memcg_seg(lruvec) != MEMCG_LRU_HEAD)
--			lru_gen_rotate_memcg(lruvec, MEMCG_LRU_HEAD);
--
-+		if (soft_limit_excess(memcg))
-+			lru_gen_soft_reclaim(&memcg->nodeinfo[nid]->lruvec);
- 		return;
- 	}
- 
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -4692,6 +4692,148 @@ void lru_gen_look_around(struct page_vma
- }
- 
- /******************************************************************************
-+ *                          memcg LRU
-+ ******************************************************************************/
-+
-+/* see the comment on MEMCG_NR_GENS */
-+enum {
-+	MEMCG_LRU_NOP,
-+	MEMCG_LRU_HEAD,
-+	MEMCG_LRU_TAIL,
-+	MEMCG_LRU_OLD,
-+	MEMCG_LRU_YOUNG,
-+};
-+
-+#ifdef CONFIG_MEMCG
-+
-+static int lru_gen_memcg_seg(struct lruvec *lruvec)
-+{
-+	return READ_ONCE(lruvec->lrugen.seg);
-+}
-+
-+static void lru_gen_rotate_memcg(struct lruvec *lruvec, int op)
-+{
-+	int seg;
-+	int old, new;
-+	int bin = get_random_u32_below(MEMCG_NR_BINS);
-+	struct pglist_data *pgdat = lruvec_pgdat(lruvec);
-+
-+	spin_lock(&pgdat->memcg_lru.lock);
-+
-+	VM_WARN_ON_ONCE(hlist_nulls_unhashed(&lruvec->lrugen.list));
-+
-+	seg = 0;
-+	new = old = lruvec->lrugen.gen;
-+
-+	/* see the comment on MEMCG_NR_GENS */
-+	if (op == MEMCG_LRU_HEAD)
-+		seg = MEMCG_LRU_HEAD;
-+	else if (op == MEMCG_LRU_TAIL)
-+		seg = MEMCG_LRU_TAIL;
-+	else if (op == MEMCG_LRU_OLD)
-+		new = get_memcg_gen(pgdat->memcg_lru.seq);
-+	else if (op == MEMCG_LRU_YOUNG)
-+		new = get_memcg_gen(pgdat->memcg_lru.seq + 1);
-+	else
-+		VM_WARN_ON_ONCE(true);
-+
-+	hlist_nulls_del_rcu(&lruvec->lrugen.list);
-+
-+	if (op == MEMCG_LRU_HEAD || op == MEMCG_LRU_OLD)
-+		hlist_nulls_add_head_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[new][bin]);
-+	else
-+		hlist_nulls_add_tail_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[new][bin]);
-+
-+	pgdat->memcg_lru.nr_memcgs[old]--;
-+	pgdat->memcg_lru.nr_memcgs[new]++;
-+
-+	lruvec->lrugen.gen = new;
-+	WRITE_ONCE(lruvec->lrugen.seg, seg);
-+
-+	if (!pgdat->memcg_lru.nr_memcgs[old] && old == get_memcg_gen(pgdat->memcg_lru.seq))
-+		WRITE_ONCE(pgdat->memcg_lru.seq, pgdat->memcg_lru.seq + 1);
-+
-+	spin_unlock(&pgdat->memcg_lru.lock);
-+}
-+
-+void lru_gen_online_memcg(struct mem_cgroup *memcg)
-+{
-+	int gen;
-+	int nid;
-+	int bin = get_random_u32_below(MEMCG_NR_BINS);
-+
-+	for_each_node(nid) {
-+		struct pglist_data *pgdat = NODE_DATA(nid);
-+		struct lruvec *lruvec = get_lruvec(memcg, nid);
-+
-+		spin_lock(&pgdat->memcg_lru.lock);
-+
-+		VM_WARN_ON_ONCE(!hlist_nulls_unhashed(&lruvec->lrugen.list));
-+
-+		gen = get_memcg_gen(pgdat->memcg_lru.seq);
-+
-+		hlist_nulls_add_tail_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[gen][bin]);
-+		pgdat->memcg_lru.nr_memcgs[gen]++;
-+
-+		lruvec->lrugen.gen = gen;
-+
-+		spin_unlock(&pgdat->memcg_lru.lock);
-+	}
-+}
-+
-+void lru_gen_offline_memcg(struct mem_cgroup *memcg)
-+{
-+	int nid;
-+
-+	for_each_node(nid) {
-+		struct lruvec *lruvec = get_lruvec(memcg, nid);
-+
-+		lru_gen_rotate_memcg(lruvec, MEMCG_LRU_OLD);
-+	}
-+}
-+
-+void lru_gen_release_memcg(struct mem_cgroup *memcg)
-+{
-+	int gen;
-+	int nid;
-+
-+	for_each_node(nid) {
-+		struct pglist_data *pgdat = NODE_DATA(nid);
-+		struct lruvec *lruvec = get_lruvec(memcg, nid);
-+
-+		spin_lock(&pgdat->memcg_lru.lock);
-+
-+		VM_WARN_ON_ONCE(hlist_nulls_unhashed(&lruvec->lrugen.list));
-+
-+		gen = lruvec->lrugen.gen;
-+
-+		hlist_nulls_del_rcu(&lruvec->lrugen.list);
-+		pgdat->memcg_lru.nr_memcgs[gen]--;
-+
-+		if (!pgdat->memcg_lru.nr_memcgs[gen] && gen == get_memcg_gen(pgdat->memcg_lru.seq))
-+			WRITE_ONCE(pgdat->memcg_lru.seq, pgdat->memcg_lru.seq + 1);
-+
-+		spin_unlock(&pgdat->memcg_lru.lock);
-+	}
-+}
-+
-+void lru_gen_soft_reclaim(struct lruvec *lruvec)
-+{
-+	/* see the comment on MEMCG_NR_GENS */
-+	if (lru_gen_memcg_seg(lruvec) != MEMCG_LRU_HEAD)
-+		lru_gen_rotate_memcg(lruvec, MEMCG_LRU_HEAD);
-+}
-+
-+#else /* !CONFIG_MEMCG */
-+
-+static int lru_gen_memcg_seg(struct lruvec *lruvec)
-+{
-+	return 0;
-+}
-+
-+#endif
-+
-+/******************************************************************************
-  *                          the eviction
-  ******************************************************************************/
- 
-@@ -5397,53 +5539,6 @@ done:
- 	pgdat->kswapd_failures = 0;
- }
- 
--#ifdef CONFIG_MEMCG
--void lru_gen_rotate_memcg(struct lruvec *lruvec, int op)
--{
--	int seg;
--	int old, new;
--	int bin = get_random_u32_below(MEMCG_NR_BINS);
--	struct pglist_data *pgdat = lruvec_pgdat(lruvec);
--
--	spin_lock(&pgdat->memcg_lru.lock);
--
--	VM_WARN_ON_ONCE(hlist_nulls_unhashed(&lruvec->lrugen.list));
--
--	seg = 0;
--	new = old = lruvec->lrugen.gen;
--
--	/* see the comment on MEMCG_NR_GENS */
--	if (op == MEMCG_LRU_HEAD)
--		seg = MEMCG_LRU_HEAD;
--	else if (op == MEMCG_LRU_TAIL)
--		seg = MEMCG_LRU_TAIL;
--	else if (op == MEMCG_LRU_OLD)
--		new = get_memcg_gen(pgdat->memcg_lru.seq);
--	else if (op == MEMCG_LRU_YOUNG)
--		new = get_memcg_gen(pgdat->memcg_lru.seq + 1);
--	else
--		VM_WARN_ON_ONCE(true);
--
--	hlist_nulls_del_rcu(&lruvec->lrugen.list);
--
--	if (op == MEMCG_LRU_HEAD || op == MEMCG_LRU_OLD)
--		hlist_nulls_add_head_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[new][bin]);
--	else
--		hlist_nulls_add_tail_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[new][bin]);
--
--	pgdat->memcg_lru.nr_memcgs[old]--;
--	pgdat->memcg_lru.nr_memcgs[new]++;
--
--	lruvec->lrugen.gen = new;
--	WRITE_ONCE(lruvec->lrugen.seg, seg);
--
--	if (!pgdat->memcg_lru.nr_memcgs[old] && old == get_memcg_gen(pgdat->memcg_lru.seq))
--		WRITE_ONCE(pgdat->memcg_lru.seq, pgdat->memcg_lru.seq + 1);
--
--	spin_unlock(&pgdat->memcg_lru.lock);
--}
--#endif
--
- /******************************************************************************
-  *                          state change
-  ******************************************************************************/
-@@ -6089,67 +6184,6 @@ void lru_gen_exit_memcg(struct mem_cgrou
- 	}
- }
- 
--void lru_gen_online_memcg(struct mem_cgroup *memcg)
--{
--	int gen;
--	int nid;
--	int bin = get_random_u32_below(MEMCG_NR_BINS);
--
--	for_each_node(nid) {
--		struct pglist_data *pgdat = NODE_DATA(nid);
--		struct lruvec *lruvec = get_lruvec(memcg, nid);
--
--		spin_lock(&pgdat->memcg_lru.lock);
--
--		VM_WARN_ON_ONCE(!hlist_nulls_unhashed(&lruvec->lrugen.list));
--
--		gen = get_memcg_gen(pgdat->memcg_lru.seq);
--
--		hlist_nulls_add_tail_rcu(&lruvec->lrugen.list, &pgdat->memcg_lru.fifo[gen][bin]);
--		pgdat->memcg_lru.nr_memcgs[gen]++;
--
--		lruvec->lrugen.gen = gen;
--
--		spin_unlock(&pgdat->memcg_lru.lock);
--	}
--}
--
--void lru_gen_offline_memcg(struct mem_cgroup *memcg)
--{
--	int nid;
--
--	for_each_node(nid) {
--		struct lruvec *lruvec = get_lruvec(memcg, nid);
--
--		lru_gen_rotate_memcg(lruvec, MEMCG_LRU_OLD);
--	}
--}
--
--void lru_gen_release_memcg(struct mem_cgroup *memcg)
--{
--	int gen;
--	int nid;
--
--	for_each_node(nid) {
--		struct pglist_data *pgdat = NODE_DATA(nid);
--		struct lruvec *lruvec = get_lruvec(memcg, nid);
--
--		spin_lock(&pgdat->memcg_lru.lock);
--
--		VM_WARN_ON_ONCE(hlist_nulls_unhashed(&lruvec->lrugen.list));
--
--		gen = lruvec->lrugen.gen;
--
--		hlist_nulls_del_rcu(&lruvec->lrugen.list);
--		pgdat->memcg_lru.nr_memcgs[gen]--;
--
--		if (!pgdat->memcg_lru.nr_memcgs[gen] && gen == get_memcg_gen(pgdat->memcg_lru.seq))
--			WRITE_ONCE(pgdat->memcg_lru.seq, pgdat->memcg_lru.seq + 1);
--
--		spin_unlock(&pgdat->memcg_lru.lock);
--	}
--}
--
- #endif /* CONFIG_MEMCG */
- 
- static int __init init_lru_gen(void)
diff --git a/target/linux/generic/backport-6.1/020-v6.3-16-UPSTREAM-mm-multi-gen-LRU-improve-lru_gen_exit_memcg.patch b/target/linux/generic/backport-6.1/020-v6.3-16-UPSTREAM-mm-multi-gen-LRU-improve-lru_gen_exit_memcg.patch
deleted file mode 100644
index fcb9708d8aae..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-16-UPSTREAM-mm-multi-gen-LRU-improve-lru_gen_exit_memcg.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From bec433f29537652ed054148edfd7e2183ddcf7c3 Mon Sep 17 00:00:00 2001
-From: "T.J. Alumbaugh" <talumbau@google.com>
-Date: Wed, 18 Jan 2023 00:18:25 +0000
-Subject: [PATCH 16/19] UPSTREAM: mm: multi-gen LRU: improve
- lru_gen_exit_memcg()
-
-Add warnings and poison ->next.
-
-Link: https://lkml.kernel.org/r/20230118001827.1040870-6-talumbau@google.com
-Change-Id: I53de9e04c1ae941e122b33cd45d2bbb5f34aae0c
-Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
-Cc: Yu Zhao <yuzhao@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-(cherry picked from commit 37cc99979d04cca677c0ad5c0acd1149ec165d1b)
-Bug: 274865848
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- mm/vmscan.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -6171,12 +6171,17 @@ void lru_gen_exit_memcg(struct mem_cgrou
- 	int i;
- 	int nid;
- 
-+	VM_WARN_ON_ONCE(!list_empty(&memcg->mm_list.fifo));
-+
- 	for_each_node(nid) {
- 		struct lruvec *lruvec = get_lruvec(memcg, nid);
- 
-+		VM_WARN_ON_ONCE(lruvec->mm_state.nr_walkers);
- 		VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0,
- 					   sizeof(lruvec->lrugen.nr_pages)));
- 
-+		lruvec->lrugen.list.next = LIST_POISON1;
-+
- 		for (i = 0; i < NR_BLOOM_FILTERS; i++) {
- 			bitmap_free(lruvec->mm_state.filters[i]);
- 			lruvec->mm_state.filters[i] = NULL;
diff --git a/target/linux/generic/backport-6.1/020-v6.3-17-UPSTREAM-mm-multi-gen-LRU-improve-walk_pmd_range.patch b/target/linux/generic/backport-6.1/020-v6.3-17-UPSTREAM-mm-multi-gen-LRU-improve-walk_pmd_range.patch
deleted file mode 100644
index 2273977dc9c1..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-17-UPSTREAM-mm-multi-gen-LRU-improve-walk_pmd_range.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From fc0e3b06e0f19917b7ecad7967a72f61d4743644 Mon Sep 17 00:00:00 2001
-From: "T.J. Alumbaugh" <talumbau@google.com>
-Date: Wed, 18 Jan 2023 00:18:26 +0000
-Subject: [PATCH 17/19] UPSTREAM: mm: multi-gen LRU: improve walk_pmd_range()
-
-Improve readability of walk_pmd_range() and walk_pmd_range_locked().
-
-Link: https://lkml.kernel.org/r/20230118001827.1040870-7-talumbau@google.com
-Change-Id: Ia084fbf53fe989673b7804ca8ca520af12d7d52a
-Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
-Cc: Yu Zhao <yuzhao@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-(cherry picked from commit b5ff4133617d0eced35b685da0bd0929dd9fabb7)
-Bug: 274865848
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- mm/vmscan.c | 40 ++++++++++++++++++++--------------------
- 1 file changed, 20 insertions(+), 20 deletions(-)
-
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -3980,8 +3980,8 @@ restart:
- }
- 
- #if defined(CONFIG_TRANSPARENT_HUGEPAGE) || defined(CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG)
--static void walk_pmd_range_locked(pud_t *pud, unsigned long next, struct vm_area_struct *vma,
--				  struct mm_walk *args, unsigned long *bitmap, unsigned long *start)
-+static void walk_pmd_range_locked(pud_t *pud, unsigned long addr, struct vm_area_struct *vma,
-+				  struct mm_walk *args, unsigned long *bitmap, unsigned long *first)
- {
- 	int i;
- 	pmd_t *pmd;
-@@ -3994,18 +3994,19 @@ static void walk_pmd_range_locked(pud_t
- 	VM_WARN_ON_ONCE(pud_leaf(*pud));
- 
- 	/* try to batch at most 1+MIN_LRU_BATCH+1 entries */
--	if (*start == -1) {
--		*start = next;
-+	if (*first == -1) {
-+		*first = addr;
-+		bitmap_zero(bitmap, MIN_LRU_BATCH);
- 		return;
- 	}
- 
--	i = next == -1 ? 0 : pmd_index(next) - pmd_index(*start);
-+	i = addr == -1 ? 0 : pmd_index(addr) - pmd_index(*first);
- 	if (i && i <= MIN_LRU_BATCH) {
- 		__set_bit(i - 1, bitmap);
- 		return;
- 	}
- 
--	pmd = pmd_offset(pud, *start);
-+	pmd = pmd_offset(pud, *first);
- 
- 	ptl = pmd_lockptr(args->mm, pmd);
- 	if (!spin_trylock(ptl))
-@@ -4016,15 +4017,16 @@ static void walk_pmd_range_locked(pud_t
- 	do {
- 		unsigned long pfn;
- 		struct folio *folio;
--		unsigned long addr = i ? (*start & PMD_MASK) + i * PMD_SIZE : *start;
-+
-+		/* don't round down the first address */
-+		addr = i ? (*first & PMD_MASK) + i * PMD_SIZE : *first;
- 
- 		pfn = get_pmd_pfn(pmd[i], vma, addr);
- 		if (pfn == -1)
- 			goto next;
- 
- 		if (!pmd_trans_huge(pmd[i])) {
--			if (arch_has_hw_nonleaf_pmd_young() &&
--			    get_cap(LRU_GEN_NONLEAF_YOUNG))
-+			if (arch_has_hw_nonleaf_pmd_young() && get_cap(LRU_GEN_NONLEAF_YOUNG))
- 				pmdp_test_and_clear_young(vma, addr, pmd + i);
- 			goto next;
- 		}
-@@ -4053,12 +4055,11 @@ next:
- 	arch_leave_lazy_mmu_mode();
- 	spin_unlock(ptl);
- done:
--	*start = -1;
--	bitmap_zero(bitmap, MIN_LRU_BATCH);
-+	*first = -1;
- }
- #else
--static void walk_pmd_range_locked(pud_t *pud, unsigned long next, struct vm_area_struct *vma,
--				  struct mm_walk *args, unsigned long *bitmap, unsigned long *start)
-+static void walk_pmd_range_locked(pud_t *pud, unsigned long addr, struct vm_area_struct *vma,
-+				  struct mm_walk *args, unsigned long *bitmap, unsigned long *first)
- {
- }
- #endif
-@@ -4071,9 +4072,9 @@ static void walk_pmd_range(pud_t *pud, u
- 	unsigned long next;
- 	unsigned long addr;
- 	struct vm_area_struct *vma;
--	unsigned long pos = -1;
-+	unsigned long bitmap[BITS_TO_LONGS(MIN_LRU_BATCH)];
-+	unsigned long first = -1;
- 	struct lru_gen_mm_walk *walk = args->private;
--	unsigned long bitmap[BITS_TO_LONGS(MIN_LRU_BATCH)] = {};
- 
- 	VM_WARN_ON_ONCE(pud_leaf(*pud));
- 
-@@ -4115,18 +4116,17 @@ restart:
- 			if (pfn < pgdat->node_start_pfn || pfn >= pgdat_end_pfn(pgdat))
- 				continue;
- 
--			walk_pmd_range_locked(pud, addr, vma, args, bitmap, &pos);
-+			walk_pmd_range_locked(pud, addr, vma, args, bitmap, &first);
- 			continue;
- 		}
- #endif
- 		walk->mm_stats[MM_NONLEAF_TOTAL]++;
- 
--		if (arch_has_hw_nonleaf_pmd_young() &&
--		    get_cap(LRU_GEN_NONLEAF_YOUNG)) {
-+		if (arch_has_hw_nonleaf_pmd_young() && get_cap(LRU_GEN_NONLEAF_YOUNG)) {
- 			if (!pmd_young(val))
- 				continue;
- 
--			walk_pmd_range_locked(pud, addr, vma, args, bitmap, &pos);
-+			walk_pmd_range_locked(pud, addr, vma, args, bitmap, &first);
- 		}
- 
- 		if (!walk->force_scan && !test_bloom_filter(walk->lruvec, walk->max_seq, pmd + i))
-@@ -4143,7 +4143,7 @@ restart:
- 		update_bloom_filter(walk->lruvec, walk->max_seq + 1, pmd + i);
- 	}
- 
--	walk_pmd_range_locked(pud, -1, vma, args, bitmap, &pos);
-+	walk_pmd_range_locked(pud, -1, vma, args, bitmap, &first);
- 
- 	if (i < PTRS_PER_PMD && get_next_vma(PUD_MASK, PMD_SIZE, args, &start, &end))
- 		goto restart;
diff --git a/target/linux/generic/backport-6.1/020-v6.3-18-UPSTREAM-mm-multi-gen-LRU-simplify-lru_gen_look_arou.patch b/target/linux/generic/backport-6.1/020-v6.3-18-UPSTREAM-mm-multi-gen-LRU-simplify-lru_gen_look_arou.patch
deleted file mode 100644
index 856199574a1c..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.3-18-UPSTREAM-mm-multi-gen-LRU-simplify-lru_gen_look_arou.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From e604c3ccb4dfbdde2467fccef9bb36170a392695 Mon Sep 17 00:00:00 2001
-From: "T.J. Alumbaugh" <talumbau@google.com>
-Date: Wed, 18 Jan 2023 00:18:27 +0000
-Subject: [PATCH 18/19] UPSTREAM: mm: multi-gen LRU: simplify
- lru_gen_look_around()
-
-Update the folio generation in place with or without
-current->reclaim_state->mm_walk.  The LRU lock is held for longer, if
-mm_walk is NULL and the number of folios to update is more than
-PAGEVEC_SIZE.
-
-This causes a measurable regression from the LRU lock contention during a
-microbencmark.  But a tiny regression is not worth the complexity.
-
-Link: https://lkml.kernel.org/r/20230118001827.1040870-8-talumbau@google.com
-Change-Id: I9ce18b4f4062e6c1c13c98ece9422478eb8e1846
-Signed-off-by: T.J. Alumbaugh <talumbau@google.com>
-Cc: Yu Zhao <yuzhao@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-(cherry picked from commit abf086721a2f1e6897c57796f7268df1b194c750)
-Bug: 274865848
-Signed-off-by: T.J. Mercier <tjmercier@google.com>
----
- mm/vmscan.c | 73 +++++++++++++++++------------------------------------
- 1 file changed, 23 insertions(+), 50 deletions(-)
-
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -4573,13 +4573,12 @@ static void lru_gen_age_node(struct pgli
- void lru_gen_look_around(struct page_vma_mapped_walk *pvmw)
- {
- 	int i;
--	pte_t *pte;
- 	unsigned long start;
- 	unsigned long end;
--	unsigned long addr;
- 	struct lru_gen_mm_walk *walk;
- 	int young = 0;
--	unsigned long bitmap[BITS_TO_LONGS(MIN_LRU_BATCH)] = {};
-+	pte_t *pte = pvmw->pte;
-+	unsigned long addr = pvmw->address;
- 	struct folio *folio = pfn_folio(pvmw->pfn);
- 	struct mem_cgroup *memcg = folio_memcg(folio);
- 	struct pglist_data *pgdat = folio_pgdat(folio);
-@@ -4596,25 +4595,28 @@ void lru_gen_look_around(struct page_vma
- 	/* avoid taking the LRU lock under the PTL when possible */
- 	walk = current->reclaim_state ? current->reclaim_state->mm_walk : NULL;
- 
--	start = max(pvmw->address & PMD_MASK, pvmw->vma->vm_start);
--	end = min(pvmw->address | ~PMD_MASK, pvmw->vma->vm_end - 1) + 1;
-+	start = max(addr & PMD_MASK, pvmw->vma->vm_start);
-+	end = min(addr | ~PMD_MASK, pvmw->vma->vm_end - 1) + 1;
- 
- 	if (end - start > MIN_LRU_BATCH * PAGE_SIZE) {
--		if (pvmw->address - start < MIN_LRU_BATCH * PAGE_SIZE / 2)
-+		if (addr - start < MIN_LRU_BATCH * PAGE_SIZE / 2)
- 			end = start + MIN_LRU_BATCH * PAGE_SIZE;
--		else if (end - pvmw->address < MIN_LRU_BATCH * PAGE_SIZE / 2)
-+		else if (end - addr < MIN_LRU_BATCH * PAGE_SIZE / 2)
- 			start = end - MIN_LRU_BATCH * PAGE_SIZE;
- 		else {
--			start = pvmw->address - MIN_LRU_BATCH * PAGE_SIZE / 2;
--			end = pvmw->address + MIN_LRU_BATCH * PAGE_SIZE / 2;
-+			start = addr - MIN_LRU_BATCH * PAGE_SIZE / 2;
-+			end = addr + MIN_LRU_BATCH * PAGE_SIZE / 2;
- 		}
- 	}
- 
--	pte = pvmw->pte - (pvmw->address - start) / PAGE_SIZE;
-+	/* folio_update_gen() requires stable folio_memcg() */
-+	if (!mem_cgroup_trylock_pages(memcg))
-+		return;
- 
--	rcu_read_lock();
- 	arch_enter_lazy_mmu_mode();
- 
-+	pte -= (addr - start) / PAGE_SIZE;
-+
- 	for (i = 0, addr = start; addr != end; i++, addr += PAGE_SIZE) {
- 		unsigned long pfn;
- 
-@@ -4639,56 +4641,27 @@ void lru_gen_look_around(struct page_vma
- 		      !folio_test_swapcache(folio)))
- 			folio_mark_dirty(folio);
- 
-+		if (walk) {
-+			old_gen = folio_update_gen(folio, new_gen);
-+			if (old_gen >= 0 && old_gen != new_gen)
-+				update_batch_size(walk, folio, old_gen, new_gen);
-+
-+			continue;
-+		}
-+
- 		old_gen = folio_lru_gen(folio);
- 		if (old_gen < 0)
- 			folio_set_referenced(folio);
- 		else if (old_gen != new_gen)
--			__set_bit(i, bitmap);
-+			folio_activate(folio);
- 	}
- 
- 	arch_leave_lazy_mmu_mode();
--	rcu_read_unlock();
-+	mem_cgroup_unlock_pages();
- 
- 	/* feedback from rmap walkers to page table walkers */
- 	if (suitable_to_scan(i, young))
- 		update_bloom_filter(lruvec, max_seq, pvmw->pmd);
--
--	if (!walk && bitmap_weight(bitmap, MIN_LRU_BATCH) < PAGEVEC_SIZE) {
--		for_each_set_bit(i, bitmap, MIN_LRU_BATCH) {
--			folio = pfn_folio(pte_pfn(pte[i]));
--			folio_activate(folio);
--		}
--		return;
--	}
--
--	/* folio_update_gen() requires stable folio_memcg() */
--	if (!mem_cgroup_trylock_pages(memcg))
--		return;
--
--	if (!walk) {
--		spin_lock_irq(&lruvec->lru_lock);
--		new_gen = lru_gen_from_seq(lruvec->lrugen.max_seq);
--	}
--
--	for_each_set_bit(i, bitmap, MIN_LRU_BATCH) {
--		folio = pfn_folio(pte_pfn(pte[i]));
--		if (folio_memcg_rcu(folio) != memcg)
--			continue;
--
--		old_gen = folio_update_gen(folio, new_gen);
--		if (old_gen < 0 || old_gen == new_gen)
--			continue;
--
--		if (walk)
--			update_batch_size(walk, folio, old_gen, new_gen);
--		else
--			lru_gen_update_size(lruvec, folio, old_gen, new_gen);
--	}
--
--	if (!walk)
--		spin_unlock_irq(&lruvec->lru_lock);
--
--	mem_cgroup_unlock_pages();
- }
- 
- /******************************************************************************
diff --git a/target/linux/generic/backport-6.1/020-v6.4-19-mm-Multi-gen-LRU-remove-wait_event_killable.patch b/target/linux/generic/backport-6.1/020-v6.4-19-mm-Multi-gen-LRU-remove-wait_event_killable.patch
deleted file mode 100644
index 958d45968657..000000000000
--- a/target/linux/generic/backport-6.1/020-v6.4-19-mm-Multi-gen-LRU-remove-wait_event_killable.patch
+++ /dev/null
@@ -1,273 +0,0 @@
-From 418038c22452df38cde519cc8c662bb15139764a Mon Sep 17 00:00:00 2001
-From: Kalesh Singh <kaleshsingh@google.com>
-Date: Thu, 13 Apr 2023 14:43:26 -0700
-Subject: [PATCH 19/19] mm: Multi-gen LRU: remove wait_event_killable()
-
-Android 14 and later default to MGLRU [1] and field telemetry showed
-occasional long tail latency (>100ms) in the reclaim path.
-
-Tracing revealed priority inversion in the reclaim path.  In
-try_to_inc_max_seq(), when high priority tasks were blocked on
-wait_event_killable(), the preemption of the low priority task to call
-wake_up_all() caused those high priority tasks to wait longer than
-necessary.  In general, this problem is not different from others of its
-kind, e.g., one caused by mutex_lock().  However, it is specific to MGLRU
-because it introduced the new wait queue lruvec->mm_state.wait.
-
-The purpose of this new wait queue is to avoid the thundering herd
-problem.  If many direct reclaimers rush into try_to_inc_max_seq(), only
-one can succeed, i.e., the one to wake up the rest, and the rest who
-failed might cause premature OOM kills if they do not wait.  So far there
-is no evidence supporting this scenario, based on how often the wait has
-been hit.  And this begs the question how useful the wait queue is in
-practice.
-
-Based on Minchan's recommendation, which is in line with his commit
-6d4675e60135 ("mm: don't be stuck to rmap lock on reclaim path") and the
-rest of the MGLRU code which also uses trylock when possible, remove the
-wait queue.
-
-[1] https://android-review.googlesource.com/q/I7ed7fbfd6ef9ce10053347528125dd98c39e50bf
-
-Link: https://lkml.kernel.org/r/20230413214326.2147568-1-kaleshsingh@google.com
-Fixes: bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
-Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
-Suggested-by: Minchan Kim <minchan@kernel.org>
-Reported-by: Wei Wang <wvw@google.com>
-Acked-by: Yu Zhao <yuzhao@google.com>
-Cc: Minchan Kim <minchan@kernel.org>
-Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
-Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
-Cc: Suleiman Souhlal <suleiman@google.com>
-Cc: Suren Baghdasaryan <surenb@google.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
----
- include/linux/mmzone.h |   8 +--
- mm/vmscan.c            | 112 +++++++++++++++--------------------------
- 2 files changed, 42 insertions(+), 78 deletions(-)
-
---- a/include/linux/mmzone.h
-+++ b/include/linux/mmzone.h
-@@ -453,18 +453,14 @@ enum {
- struct lru_gen_mm_state {
- 	/* set to max_seq after each iteration */
- 	unsigned long seq;
--	/* where the current iteration continues (inclusive) */
-+	/* where the current iteration continues after */
- 	struct list_head *head;
--	/* where the last iteration ended (exclusive) */
-+	/* where the last iteration ended before */
- 	struct list_head *tail;
--	/* to wait for the last page table walker to finish */
--	struct wait_queue_head wait;
- 	/* Bloom filters flip after each iteration */
- 	unsigned long *filters[NR_BLOOM_FILTERS];
- 	/* the mm stats for debugging */
- 	unsigned long stats[NR_HIST_GENS][NR_MM_STATS];
--	/* the number of concurrent page table walkers */
--	int nr_walkers;
- };
- 
- struct lru_gen_mm_walk {
---- a/mm/vmscan.c
-+++ b/mm/vmscan.c
-@@ -3371,18 +3371,13 @@ void lru_gen_del_mm(struct mm_struct *mm
- 		if (!lruvec)
- 			continue;
- 
--		/* where the last iteration ended (exclusive) */
-+		/* where the current iteration continues after */
-+		if (lruvec->mm_state.head == &mm->lru_gen.list)
-+			lruvec->mm_state.head = lruvec->mm_state.head->prev;
-+
-+		/* where the last iteration ended before */
- 		if (lruvec->mm_state.tail == &mm->lru_gen.list)
- 			lruvec->mm_state.tail = lruvec->mm_state.tail->next;
--
--		/* where the current iteration continues (inclusive) */
--		if (lruvec->mm_state.head != &mm->lru_gen.list)
--			continue;
--
--		lruvec->mm_state.head = lruvec->mm_state.head->next;
--		/* the deletion ends the current iteration */
--		if (lruvec->mm_state.head == &mm_list->fifo)
--			WRITE_ONCE(lruvec->mm_state.seq, lruvec->mm_state.seq + 1);
- 	}
- 
- 	list_del_init(&mm->lru_gen.list);
-@@ -3478,68 +3473,54 @@ static bool iterate_mm_list(struct lruve
- 			    struct mm_struct **iter)
- {
- 	bool first = false;
--	bool last = true;
-+	bool last = false;
- 	struct mm_struct *mm = NULL;
- 	struct mem_cgroup *memcg = lruvec_memcg(lruvec);
- 	struct lru_gen_mm_list *mm_list = get_mm_list(memcg);
- 	struct lru_gen_mm_state *mm_state = &lruvec->mm_state;
- 
- 	/*
--	 * There are four interesting cases for this page table walker:
--	 * 1. It tries to start a new iteration of mm_list with a stale max_seq;
--	 *    there is nothing left to do.
--	 * 2. It's the first of the current generation, and it needs to reset
--	 *    the Bloom filter for the next generation.
--	 * 3. It reaches the end of mm_list, and it needs to increment
--	 *    mm_state->seq; the iteration is done.
--	 * 4. It's the last of the current generation, and it needs to reset the
--	 *    mm stats counters for the next generation.
-+	 * mm_state->seq is incremented after each iteration of mm_list. There
-+	 * are three interesting cases for this page table walker:
-+	 * 1. It tries to start a new iteration with a stale max_seq: there is
-+	 *    nothing left to do.
-+	 * 2. It started the next iteration: it needs to reset the Bloom filter
-+	 *    so that a fresh set of PTE tables can be recorded.
-+	 * 3. It ended the current iteration: it needs to reset the mm stats
-+	 *    counters and tell its caller to increment max_seq.
- 	 */
- 	spin_lock(&mm_list->lock);
- 
- 	VM_WARN_ON_ONCE(mm_state->seq + 1 < walk->max_seq);
--	VM_WARN_ON_ONCE(*iter && mm_state->seq > walk->max_seq);
--	VM_WARN_ON_ONCE(*iter && !mm_state->nr_walkers);
- 
--	if (walk->max_seq <= mm_state->seq) {
--		if (!*iter)
--			last = false;
-+	if (walk->max_seq <= mm_state->seq)
- 		goto done;
--	}
- 
--	if (!mm_state->nr_walkers) {
--		VM_WARN_ON_ONCE(mm_state->head && mm_state->head != &mm_list->fifo);
-+	if (!mm_state->head)
-+		mm_state->head = &mm_list->fifo;
- 
--		mm_state->head = mm_list->fifo.next;
-+	if (mm_state->head == &mm_list->fifo)
- 		first = true;
--	}
--
--	while (!mm && mm_state->head != &mm_list->fifo) {
--		mm = list_entry(mm_state->head, struct mm_struct, lru_gen.list);
- 
-+	do {
- 		mm_state->head = mm_state->head->next;
-+		if (mm_state->head == &mm_list->fifo) {
-+			WRITE_ONCE(mm_state->seq, mm_state->seq + 1);
-+			last = true;
-+			break;
-+		}
- 
- 		/* force scan for those added after the last iteration */
--		if (!mm_state->tail || mm_state->tail == &mm->lru_gen.list) {
--			mm_state->tail = mm_state->head;
-+		if (!mm_state->tail || mm_state->tail == mm_state->head) {
-+			mm_state->tail = mm_state->head->next;
- 			walk->force_scan = true;
- 		}
- 
-+		mm = list_entry(mm_state->head, struct mm_struct, lru_gen.list);
- 		if (should_skip_mm(mm, walk))
- 			mm = NULL;
--	}
--
--	if (mm_state->head == &mm_list->fifo)
--		WRITE_ONCE(mm_state->seq, mm_state->seq + 1);
-+	} while (!mm);
- done:
--	if (*iter && !mm)
--		mm_state->nr_walkers--;
--	if (!*iter && mm)
--		mm_state->nr_walkers++;
--
--	if (mm_state->nr_walkers)
--		last = false;
--
- 	if (*iter || last)
- 		reset_mm_stats(lruvec, walk, last);
- 
-@@ -3567,9 +3548,9 @@ static bool iterate_mm_list_nowalk(struc
- 
- 	VM_WARN_ON_ONCE(mm_state->seq + 1 < max_seq);
- 
--	if (max_seq > mm_state->seq && !mm_state->nr_walkers) {
--		VM_WARN_ON_ONCE(mm_state->head && mm_state->head != &mm_list->fifo);
--
-+	if (max_seq > mm_state->seq) {
-+		mm_state->head = NULL;
-+		mm_state->tail = NULL;
- 		WRITE_ONCE(mm_state->seq, mm_state->seq + 1);
- 		reset_mm_stats(lruvec, NULL, true);
- 		success = true;
-@@ -4172,10 +4153,6 @@ restart:
- 
- 		walk_pmd_range(&val, addr, next, args);
- 
--		/* a racy check to curtail the waiting time */
--		if (wq_has_sleeper(&walk->lruvec->mm_state.wait))
--			return 1;
--
- 		if (need_resched() || walk->batched >= MAX_LRU_BATCH) {
- 			end = (addr | ~PUD_MASK) + 1;
- 			goto done;
-@@ -4208,8 +4185,14 @@ static void walk_mm(struct lruvec *lruve
- 	walk->next_addr = FIRST_USER_ADDRESS;
- 
- 	do {
-+		DEFINE_MAX_SEQ(lruvec);
-+
- 		err = -EBUSY;
- 
-+		/* another thread might have called inc_max_seq() */
-+		if (walk->max_seq != max_seq)
-+			break;
-+
- 		/* folio_update_gen() requires stable folio_memcg() */
- 		if (!mem_cgroup_trylock_pages(memcg))
- 			break;
-@@ -4444,25 +4427,12 @@ static bool try_to_inc_max_seq(struct lr
- 		success = iterate_mm_list(lruvec, walk, &mm);
- 		if (mm)
- 			walk_mm(lruvec, mm, walk);
--
--		cond_resched();
- 	} while (mm);
- done:
--	if (!success) {
--		if (sc->priority <= DEF_PRIORITY - 2)
--			wait_event_killable(lruvec->mm_state.wait,
--					    max_seq < READ_ONCE(lrugen->max_seq));
--		return false;
--	}
-+	if (success)
-+		inc_max_seq(lruvec, can_swap, force_scan);
- 
--	VM_WARN_ON_ONCE(max_seq != READ_ONCE(lrugen->max_seq));
--
--	inc_max_seq(lruvec, can_swap, force_scan);
--	/* either this sees any waiters or they will see updated max_seq */
--	if (wq_has_sleeper(&lruvec->mm_state.wait))
--		wake_up_all(&lruvec->mm_state.wait);
--
--	return true;
-+	return success;
- }
- 
- /******************************************************************************
-@@ -6116,7 +6086,6 @@ void lru_gen_init_lruvec(struct lruvec *
- 		INIT_LIST_HEAD(&lrugen->folios[gen][type][zone]);
- 
- 	lruvec->mm_state.seq = MIN_NR_GENS;
--	init_waitqueue_head(&lruvec->mm_state.wait);
- }
- 
- #ifdef CONFIG_MEMCG
-@@ -6149,7 +6118,6 @@ void lru_gen_exit_memcg(struct mem_cgrou
- 	for_each_node(nid) {
- 		struct lruvec *lruvec = get_lruvec(memcg, nid);
- 
--		VM_WARN_ON_ONCE(lruvec->mm_state.nr_walkers);
- 		VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0,
- 					   sizeof(lruvec->lrugen.nr_pages)));
- 
diff --git a/target/linux/generic/backport-6.1/200-v6.3-bitfield-add-FIELD_PREP_CONST.patch b/target/linux/generic/backport-6.1/200-v6.3-bitfield-add-FIELD_PREP_CONST.patch
deleted file mode 100644
index 2e6d881fe9f1..000000000000
--- a/target/linux/generic/backport-6.1/200-v6.3-bitfield-add-FIELD_PREP_CONST.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From e2192de59e457aef8d1f055a452131f0b3e5d097 Mon Sep 17 00:00:00 2001
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Wed, 18 Jan 2023 14:26:53 +0100
-Subject: [PATCH] bitfield: add FIELD_PREP_CONST()
-
-Neither FIELD_PREP() nor *_encode_bits() can be used
-in constant contexts (such as initializers), but we
-don't want to define shift constants for all masks
-just for use in initializers, and having checks that
-the values fit is also useful.
-
-Therefore, add FIELD_PREP_CONST() which is a smaller
-version of FIELD_PREP() that can only take constant
-arguments and has less friendly (but not less strict)
-error checks, and expands to a constant value.
-
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Link: https://lore.kernel.org/r/20230118142652.53f20593504b.Iaeea0aee77a6493d70e573b4aa55c91c00e01e4b@changeid
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
- include/linux/bitfield.h | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/include/linux/bitfield.h
-+++ b/include/linux/bitfield.h
-@@ -115,6 +115,32 @@
- 		((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask);	\
- 	})
- 
-+#define __BF_CHECK_POW2(n)	BUILD_BUG_ON_ZERO(((n) & ((n) - 1)) != 0)
-+
-+/**
-+ * FIELD_PREP_CONST() - prepare a constant bitfield element
-+ * @_mask: shifted mask defining the field's length and position
-+ * @_val:  value to put in the field
-+ *
-+ * FIELD_PREP_CONST() masks and shifts up the value.  The result should
-+ * be combined with other fields of the bitfield using logical OR.
-+ *
-+ * Unlike FIELD_PREP() this is a constant expression and can therefore
-+ * be used in initializers. Error checking is less comfortable for this
-+ * version, and non-constant masks cannot be used.
-+ */
-+#define FIELD_PREP_CONST(_mask, _val)					\
-+	(								\
-+		/* mask must be non-zero */				\
-+		BUILD_BUG_ON_ZERO((_mask) == 0) +			\
-+		/* check if value fits */				\
-+		BUILD_BUG_ON_ZERO(~((_mask) >> __bf_shf(_mask)) & (_val)) + \
-+		/* check if mask is contiguous */			\
-+		__BF_CHECK_POW2((_mask) + (1ULL << __bf_shf(_mask))) +	\
-+		/* and create the value */				\
-+		(((typeof(_mask))(_val) << __bf_shf(_mask)) & (_mask))	\
-+	)
-+
- /**
-  * FIELD_GET() - extract a bitfield element
-  * @_mask: shifted mask defining the field's length and position
diff --git a/target/linux/generic/backport-6.1/300-v6.2-powerpc-suppress-some-linker-warnings-in-recent-link.patch b/target/linux/generic/backport-6.1/300-v6.2-powerpc-suppress-some-linker-warnings-in-recent-link.patch
deleted file mode 100644
index d8d0cf955578..000000000000
--- a/target/linux/generic/backport-6.1/300-v6.2-powerpc-suppress-some-linker-warnings-in-recent-link.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 579aee9fc594af94c242068c011b0233563d4bbf Mon Sep 17 00:00:00 2001
-From: Stephen Rothwell <sfr@canb.auug.org.au>
-Date: Mon, 10 Oct 2022 16:57:21 +1100
-Subject: [PATCH] powerpc: suppress some linker warnings in recent linker
- versions
-
-This is a follow on from commit
-
-  0d362be5b142 ("Makefile: link with -z noexecstack --no-warn-rwx-segments")
-
-for arch/powerpc/boot to address wanrings like:
-
-  ld: warning: opal-calls.o: missing .note.GNU-stack section implies executable stack
-  ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
-  ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions
-
-This fixes issue https://github.com/linuxppc/issues/issues/417
-
-Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-Link: https://lore.kernel.org/r/20221010165721.106267e6@canb.auug.org.au
----
- arch/powerpc/boot/wrapper | 15 ++++++++++++++-
- 1 file changed, 14 insertions(+), 1 deletion(-)
-
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -215,6 +215,11 @@ ld_version()
-     }'
- }
- 
-+ld_is_lld()
-+{
-+	${CROSS}ld -V 2>&1 | grep -q LLD
-+}
-+
- # Do not include PT_INTERP segment when linking pie. Non-pie linking
- # just ignores this option.
- LD_VERSION=$(${CROSS}ld --version | ld_version)
-@@ -223,6 +228,14 @@ if [ "$LD_VERSION" -ge "$LD_NO_DL_MIN_VE
- 	nodl="--no-dynamic-linker"
- fi
- 
-+# suppress some warnings in recent ld versions
-+nowarn="-z noexecstack"
-+if ! ld_is_lld; then
-+	if [ "$LD_VERSION" -ge "$(echo 2.39 | ld_version)" ]; then
-+		nowarn="$nowarn --no-warn-rwx-segments"
-+	fi
-+fi
-+
- platformo=$object/"$platform".o
- lds=$object/zImage.lds
- ext=strip
-@@ -504,7 +517,7 @@ if [ "$platform" != "miboot" ]; then
-         text_start="-Ttext $link_address"
-     fi
- #link everything
--    ${CROSS}ld -m $format -T $lds $text_start $pie $nodl $rodynamic $notext -o "$ofile" $map \
-+    ${CROSS}ld -m $format -T $lds $text_start $pie $nodl $nowarn $rodynamic $notext -o "$ofile" $map \
- 	$platformo $tmp $object/wrapper.a
-     rm $tmp
- fi
diff --git a/target/linux/generic/backport-6.1/301-v6.9-kernel.h-removed-REPEAT_BYTE-from-kernel.h.patch b/target/linux/generic/backport-6.1/301-v6.9-kernel.h-removed-REPEAT_BYTE-from-kernel.h.patch
deleted file mode 100644
index 239adff1af7d..000000000000
--- a/target/linux/generic/backport-6.1/301-v6.9-kernel.h-removed-REPEAT_BYTE-from-kernel.h.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From 66a5c40f60f5d88ad8d47ba6a4ba05892853fa1f Mon Sep 17 00:00:00 2001
-From: Tanzir Hasan <tanzirh@google.com>
-Date: Tue, 26 Dec 2023 18:00:00 +0000
-Subject: [PATCH] kernel.h: removed REPEAT_BYTE from kernel.h
-
-This patch creates wordpart.h and includes it in asm/word-at-a-time.h
-for all architectures. WORD_AT_A_TIME_CONSTANTS depends on kernel.h
-because of REPEAT_BYTE. Moving this to another header and including it
-where necessary allows us to not include the bloated kernel.h. Making
-this implicit dependency on REPEAT_BYTE explicit allows for later
-improvements in the lib/string.c inclusion list.
-
-Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
-Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
-Signed-off-by: Tanzir Hasan <tanzirh@google.com>
-Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
-Link: https://lore.kernel.org/r/20231226-libstringheader-v6-1-80aa08c7652c@google.com
-Signed-off-by: Kees Cook <keescook@chromium.org>
----
- arch/arm/include/asm/word-at-a-time.h     |  3 ++-
- arch/arm64/include/asm/word-at-a-time.h   |  3 ++-
- arch/powerpc/include/asm/word-at-a-time.h |  4 ++--
- arch/riscv/include/asm/word-at-a-time.h   |  3 ++-
- arch/s390/include/asm/word-at-a-time.h    |  3 ++-
- arch/sh/include/asm/word-at-a-time.h      |  2 ++
- arch/x86/include/asm/word-at-a-time.h     |  3 ++-
- arch/x86/kvm/mmu/mmu.c                    |  1 +
- fs/namei.c                                |  2 +-
- include/asm-generic/word-at-a-time.h      |  3 ++-
- include/linux/kernel.h                    |  8 --------
- include/linux/wordpart.h                  | 13 +++++++++++++
- 12 files changed, 31 insertions(+), 17 deletions(-)
- create mode 100644 include/linux/wordpart.h
-
---- a/arch/arm/include/asm/word-at-a-time.h
-+++ b/arch/arm/include/asm/word-at-a-time.h
-@@ -8,7 +8,8 @@
-  * Little-endian word-at-a-time zero byte handling.
-  * Heavily based on the x86 algorithm.
-  */
--#include <linux/kernel.h>
-+#include <linux/bitops.h>
-+#include <linux/wordpart.h>
- 
- struct word_at_a_time {
- 	const unsigned long one_bits, high_bits;
---- a/arch/arm64/include/asm/word-at-a-time.h
-+++ b/arch/arm64/include/asm/word-at-a-time.h
-@@ -9,7 +9,8 @@
- 
- #ifndef __AARCH64EB__
- 
--#include <linux/kernel.h>
-+#include <linux/bitops.h>
-+#include <linux/wordpart.h>
- 
- struct word_at_a_time {
- 	const unsigned long one_bits, high_bits;
---- a/arch/powerpc/include/asm/word-at-a-time.h
-+++ b/arch/powerpc/include/asm/word-at-a-time.h
-@@ -4,8 +4,8 @@
- /*
-  * Word-at-a-time interfaces for PowerPC.
-  */
--
--#include <linux/kernel.h>
-+#include <linux/bitops.h>
-+#include <linux/wordpart.h>
- #include <asm/asm-compat.h>
- #include <asm/extable.h>
- 
---- a/arch/sh/include/asm/word-at-a-time.h
-+++ b/arch/sh/include/asm/word-at-a-time.h
-@@ -5,6 +5,8 @@
- #ifdef CONFIG_CPU_BIG_ENDIAN
- # include <asm-generic/word-at-a-time.h>
- #else
-+#include <linux/bitops.h>
-+#include <linux/wordpart.h>
- /*
-  * Little-endian version cribbed from x86.
-  */
---- a/arch/x86/include/asm/word-at-a-time.h
-+++ b/arch/x86/include/asm/word-at-a-time.h
-@@ -2,7 +2,8 @@
- #ifndef _ASM_WORD_AT_A_TIME_H
- #define _ASM_WORD_AT_A_TIME_H
- 
--#include <linux/kernel.h>
-+#include <linux/bitops.h>
-+#include <linux/wordpart.h>
- 
- /*
-  * This is largely generic for little-endian machines, but the
---- a/arch/x86/kvm/mmu/mmu.c
-+++ b/arch/x86/kvm/mmu/mmu.c
-@@ -44,6 +44,7 @@
- #include <linux/kern_levels.h>
- #include <linux/kstrtox.h>
- #include <linux/kthread.h>
-+#include <linux/wordpart.h>
- 
- #include <asm/page.h>
- #include <asm/memtype.h>
---- a/fs/namei.c
-+++ b/fs/namei.c
-@@ -17,8 +17,8 @@
- 
- #include <linux/init.h>
- #include <linux/export.h>
--#include <linux/kernel.h>
- #include <linux/slab.h>
-+#include <linux/wordpart.h>
- #include <linux/fs.h>
- #include <linux/namei.h>
- #include <linux/pagemap.h>
---- a/include/asm-generic/word-at-a-time.h
-+++ b/include/asm-generic/word-at-a-time.h
-@@ -2,7 +2,8 @@
- #ifndef _ASM_WORD_AT_A_TIME_H
- #define _ASM_WORD_AT_A_TIME_H
- 
--#include <linux/kernel.h>
-+#include <linux/bitops.h>
-+#include <linux/wordpart.h>
- #include <asm/byteorder.h>
- 
- #ifdef __BIG_ENDIAN
---- a/include/linux/kernel.h
-+++ b/include/linux/kernel.h
-@@ -36,14 +36,6 @@
- 
- #define STACK_MAGIC	0xdeadbeef
- 
--/**
-- * REPEAT_BYTE - repeat the value @x multiple times as an unsigned long value
-- * @x: value to repeat
-- *
-- * NOTE: @x is not checked for > 0xff; larger values produce odd results.
-- */
--#define REPEAT_BYTE(x)	((~0ul / 0xff) * (x))
--
- /* generic data direction definitions */
- #define READ			0
- #define WRITE			1
---- /dev/null
-+++ b/include/linux/wordpart.h
-@@ -0,0 +1,13 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+
-+#ifndef _LINUX_WORDPART_H
-+#define _LINUX_WORDPART_H
-+/**
-+ * REPEAT_BYTE - repeat the value @x multiple times as an unsigned long value
-+ * @x: value to repeat
-+ *
-+ * NOTE: @x is not checked for > 0xff; larger values produce odd results.
-+ */
-+#define REPEAT_BYTE(x)	((~0ul / 0xff) * (x))
-+
-+#endif // _LINUX_WORDPART_H
diff --git a/target/linux/generic/backport-6.1/302-v6.9-kernel.h-Move-upper_-_bits-and-lower_-_bits-to-wordp.patch b/target/linux/generic/backport-6.1/302-v6.9-kernel.h-Move-upper_-_bits-and-lower_-_bits-to-wordp.patch
deleted file mode 100644
index 9bbd515852d5..000000000000
--- a/target/linux/generic/backport-6.1/302-v6.9-kernel.h-Move-upper_-_bits-and-lower_-_bits-to-wordp.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From adeb04362d74188c1e22ccb824b15a0a7b3de2f4 Mon Sep 17 00:00:00 2001
-From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Date: Wed, 14 Feb 2024 19:26:32 +0200
-Subject: [PATCH] kernel.h: Move upper_*_bits() and lower_*_bits() to
- wordpart.h
-
-The wordpart.h header is collecting APIs related to the handling
-parts of the word (usually in byte granularity). The upper_*_bits()
-and lower_*_bits() are good candidates to be moved to there.
-
-This helps to clean up header dependency hell with regard to kernel.h
-as the latter gathers completely unrelated stuff together and slows
-down compilation (especially when it's included into other header).
-
-Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Link: https://lore.kernel.org/r/20240214172752.3605073-1-andriy.shevchenko@linux.intel.com
-Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
-Signed-off-by: Kees Cook <keescook@chromium.org>
----
- include/linux/kernel.h   | 30 ++----------------------------
- include/linux/wordpart.h | 29 +++++++++++++++++++++++++++++
- 2 files changed, 31 insertions(+), 28 deletions(-)
-
---- a/include/linux/kernel.h
-+++ b/include/linux/kernel.h
-@@ -30,6 +30,8 @@
- #include <linux/build_bug.h>
- #include <linux/static_call_types.h>
- #include <linux/instruction_pointer.h>
-+#include <linux/wordpart.h>
-+
- #include <asm/byteorder.h>
- 
- #include <uapi/linux/kernel.h>
-@@ -55,34 +57,6 @@
- }					\
- )
- 
--/**
-- * upper_32_bits - return bits 32-63 of a number
-- * @n: the number we're accessing
-- *
-- * A basic shift-right of a 64- or 32-bit quantity.  Use this to suppress
-- * the "right shift count >= width of type" warning when that quantity is
-- * 32-bits.
-- */
--#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
--
--/**
-- * lower_32_bits - return bits 0-31 of a number
-- * @n: the number we're accessing
-- */
--#define lower_32_bits(n) ((u32)((n) & 0xffffffff))
--
--/**
-- * upper_16_bits - return bits 16-31 of a number
-- * @n: the number we're accessing
-- */
--#define upper_16_bits(n) ((u16)((n) >> 16))
--
--/**
-- * lower_16_bits - return bits 0-15 of a number
-- * @n: the number we're accessing
-- */
--#define lower_16_bits(n) ((u16)((n) & 0xffff))
--
- struct completion;
- struct user;
- 
---- a/include/linux/wordpart.h
-+++ b/include/linux/wordpart.h
-@@ -2,6 +2,35 @@
- 
- #ifndef _LINUX_WORDPART_H
- #define _LINUX_WORDPART_H
-+
-+/**
-+ * upper_32_bits - return bits 32-63 of a number
-+ * @n: the number we're accessing
-+ *
-+ * A basic shift-right of a 64- or 32-bit quantity.  Use this to suppress
-+ * the "right shift count >= width of type" warning when that quantity is
-+ * 32-bits.
-+ */
-+#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
-+
-+/**
-+ * lower_32_bits - return bits 0-31 of a number
-+ * @n: the number we're accessing
-+ */
-+#define lower_32_bits(n) ((u32)((n) & 0xffffffff))
-+
-+/**
-+ * upper_16_bits - return bits 16-31 of a number
-+ * @n: the number we're accessing
-+ */
-+#define upper_16_bits(n) ((u16)((n) >> 16))
-+
-+/**
-+ * lower_16_bits - return bits 0-15 of a number
-+ * @n: the number we're accessing
-+ */
-+#define lower_16_bits(n) ((u16)((n) & 0xffff))
-+
- /**
-  * REPEAT_BYTE - repeat the value @x multiple times as an unsigned long value
-  * @x: value to repeat
diff --git a/target/linux/generic/backport-6.1/400-v6.9-mtd-rawnand-brcmnand-Support-write-protection-settin.patch b/target/linux/generic/backport-6.1/400-v6.9-mtd-rawnand-brcmnand-Support-write-protection-settin.patch
deleted file mode 100644
index ba01bac8d2fa..000000000000
--- a/target/linux/generic/backport-6.1/400-v6.9-mtd-rawnand-brcmnand-Support-write-protection-settin.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 8e7daa85641c9559c113f6b217bdc923397de77c Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Thu, 22 Feb 2024 19:47:58 -0800
-Subject: [PATCH] mtd: rawnand: brcmnand: Support write protection setting from
- dts
-
-The write protection feature is controlled by the module parameter wp_on
-with default set to enabled. But not all the board use this feature
-especially in BCMBCA broadband board. And module parameter is not
-sufficient as different board can have different option.  Add a device
-tree property and allow this feature to be configured through the board
-dts on per board basis.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com>
-Reviewed-by: David Regan <dregan@broadcom.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-14-william.zhang@broadcom.com
----
- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
-@@ -3188,6 +3188,10 @@ int brcmnand_probe(struct platform_devic
- 	/* Disable XOR addressing */
- 	brcmnand_rmw_reg(ctrl, BRCMNAND_CS_XOR, 0xff, 0, 0);
- 
-+	/* Check if the board connects the WP pin */
-+	if (of_property_read_bool(dn, "brcm,wp-not-connected"))
-+		wp_on = 0;
-+
- 	if (ctrl->features & BRCMNAND_HAS_WP) {
- 		/* Permanently disable write protection */
- 		if (wp_on == 2)
diff --git a/target/linux/generic/backport-6.1/406-v6.2-0001-mtd-core-simplify-a-bit-code-find-partition-matching.patch b/target/linux/generic/backport-6.1/406-v6.2-0001-mtd-core-simplify-a-bit-code-find-partition-matching.patch
deleted file mode 100644
index eb6be5ed00e2..000000000000
--- a/target/linux/generic/backport-6.1/406-v6.2-0001-mtd-core-simplify-a-bit-code-find-partition-matching.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 63db0cb35e1cb3b3c134906d1062f65513fdda2d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 4 Oct 2022 10:37:09 +0200
-Subject: [PATCH] mtd: core: simplify (a bit) code find partition-matching
- dynamic OF node
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Don't hardcode "partition-" string twice
-2. Use simpler logic & use ->name to avoid of_property_read_string()
-3. Use mtd_get_of_node() helper
-
-Cc: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221004083710.27704-1-zajec5@gmail.com
----
- drivers/mtd/mtdcore.c | 16 +++++++---------
- 1 file changed, 7 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -551,18 +551,16 @@ static void mtd_check_of_node(struct mtd
- 	struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
- 	const char *pname, *prefix = "partition-";
- 	int plen, mtd_name_len, offset, prefix_len;
--	struct mtd_info *parent;
- 	bool found = false;
- 
- 	/* Check if MTD already has a device node */
--	if (dev_of_node(&mtd->dev))
-+	if (mtd_get_of_node(mtd))
- 		return;
- 
- 	/* Check if a partitions node exist */
- 	if (!mtd_is_partition(mtd))
- 		return;
--	parent = mtd->parent;
--	parent_dn = of_node_get(dev_of_node(&parent->dev));
-+	parent_dn = of_node_get(mtd_get_of_node(mtd->parent));
- 	if (!parent_dn)
- 		return;
- 
-@@ -575,15 +573,15 @@ static void mtd_check_of_node(struct mtd
- 
- 	/* Search if a partition is defined with the same name */
- 	for_each_child_of_node(partitions, mtd_dn) {
--		offset = 0;
--
- 		/* Skip partition with no/wrong prefix */
--		if (!of_node_name_prefix(mtd_dn, "partition-"))
-+		if (!of_node_name_prefix(mtd_dn, prefix))
- 			continue;
- 
- 		/* Label have priority. Check that first */
--		if (of_property_read_string(mtd_dn, "label", &pname)) {
--			of_property_read_string(mtd_dn, "name", &pname);
-+		if (!of_property_read_string(mtd_dn, "label", &pname)) {
-+			offset = 0;
-+		} else {
-+			pname = mtd_dn->name;
- 			offset = prefix_len;
- 		}
- 
diff --git a/target/linux/generic/backport-6.1/406-v6.2-0002-mtd-core-try-to-find-OF-node-for-every-MTD-partition.patch b/target/linux/generic/backport-6.1/406-v6.2-0002-mtd-core-try-to-find-OF-node-for-every-MTD-partition.patch
deleted file mode 100644
index f8d3a370d448..000000000000
--- a/target/linux/generic/backport-6.1/406-v6.2-0002-mtd-core-try-to-find-OF-node-for-every-MTD-partition.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From ddb8cefb7af288950447ca6eeeafb09977dab56f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 4 Oct 2022 10:37:10 +0200
-Subject: [PATCH] mtd: core: try to find OF node for every MTD partition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far this feature was limited to the top-level "nvmem-cells" node.
-There are multiple parsers creating partitions and subpartitions
-dynamically. Extend that code to handle them too.
-
-This allows finding partition-* node for every MTD (sub)partition.
-
-Random example:
-
-partitions {
-	compatible = "brcm,bcm947xx-cfe-partitions";
-
-	partition-firmware {
-		compatible = "brcm,trx";
-
-		partition-loader {
-		};
-	};
-};
-
-Cc: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221004083710.27704-2-zajec5@gmail.com
----
- drivers/mtd/mtdcore.c | 18 ++++++------------
- 1 file changed, 6 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -551,20 +551,22 @@ static void mtd_check_of_node(struct mtd
- 	struct device_node *partitions, *parent_dn, *mtd_dn = NULL;
- 	const char *pname, *prefix = "partition-";
- 	int plen, mtd_name_len, offset, prefix_len;
--	bool found = false;
- 
- 	/* Check if MTD already has a device node */
- 	if (mtd_get_of_node(mtd))
- 		return;
- 
--	/* Check if a partitions node exist */
- 	if (!mtd_is_partition(mtd))
- 		return;
-+
- 	parent_dn = of_node_get(mtd_get_of_node(mtd->parent));
- 	if (!parent_dn)
- 		return;
- 
--	partitions = of_get_child_by_name(parent_dn, "partitions");
-+	if (mtd_is_partition(mtd->parent))
-+		partitions = of_node_get(parent_dn);
-+	else
-+		partitions = of_get_child_by_name(parent_dn, "partitions");
- 	if (!partitions)
- 		goto exit_parent;
- 
-@@ -588,19 +590,11 @@ static void mtd_check_of_node(struct mtd
- 		plen = strlen(pname) - offset;
- 		if (plen == mtd_name_len &&
- 		    !strncmp(mtd->name, pname + offset, plen)) {
--			found = true;
-+			mtd_set_of_node(mtd, mtd_dn);
- 			break;
- 		}
- 	}
- 
--	if (!found)
--		goto exit_partitions;
--
--	/* Set of_node only for nvmem */
--	if (of_device_is_compatible(mtd_dn, "nvmem-cells"))
--		mtd_set_of_node(mtd, mtd_dn);
--
--exit_partitions:
- 	of_node_put(partitions);
- exit_parent:
- 	of_node_put(parent_dn);
diff --git a/target/linux/generic/backport-6.1/408-v6.2-mtd-core-set-ROOT_DEV-for-partitions-marked-as-rootf.patch b/target/linux/generic/backport-6.1/408-v6.2-mtd-core-set-ROOT_DEV-for-partitions-marked-as-rootf.patch
deleted file mode 100644
index 5a5e11c8f7ad..000000000000
--- a/target/linux/generic/backport-6.1/408-v6.2-mtd-core-set-ROOT_DEV-for-partitions-marked-as-rootf.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 26422ac78e9d8767bd4aabfbae616b15edbf6a1b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 22 Oct 2022 23:13:18 +0200
-Subject: [PATCH] mtd: core: set ROOT_DEV for partitions marked as rootfs in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds support for "linux,rootfs" binding that is used to mark flash
-partition containing rootfs. It's useful for devices using device tree
-that don't have bootloader passing root info in cmdline.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221022211318.32009-2-zajec5@gmail.com
----
- drivers/mtd/mtdcore.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -28,6 +28,7 @@
- #include <linux/leds.h>
- #include <linux/debugfs.h>
- #include <linux/nvmem-provider.h>
-+#include <linux/root_dev.h>
- 
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-@@ -737,6 +738,17 @@ int add_mtd_device(struct mtd_info *mtd)
- 		not->add(mtd);
- 
- 	mutex_unlock(&mtd_table_mutex);
-+
-+	if (of_find_property(mtd_get_of_node(mtd), "linux,rootfs", NULL)) {
-+		if (IS_BUILTIN(CONFIG_MTD)) {
-+			pr_info("mtd: setting mtd%d (%s) as root device\n", mtd->index, mtd->name);
-+			ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
-+		} else {
-+			pr_warn("mtd: can't set mtd%d (%s) as root device - mtd must be builtin\n",
-+				mtd->index, mtd->name);
-+		}
-+	}
-+
- 	/* We _know_ we aren't being removed, because
- 	   our caller is still holding us here. So none
- 	   of this try_ nonsense, and no bitching about it
diff --git a/target/linux/generic/backport-6.1/410-v6.2-mtd-spi-nor-add-generic-flash-driver.patch b/target/linux/generic/backport-6.1/410-v6.2-mtd-spi-nor-add-generic-flash-driver.patch
deleted file mode 100644
index 4978dcedbf6e..000000000000
--- a/target/linux/generic/backport-6.1/410-v6.2-mtd-spi-nor-add-generic-flash-driver.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 773bbe10449731c9525457873e0c2342e5cf883b Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Thu, 11 Aug 2022 00:06:53 +0200
-Subject: [PATCH] mtd: spi-nor: add generic flash driver
-
-Our SFDP parsing is everything we need to support all basic operations
-of a flash device. If the flash isn't found in our in-kernel flash
-database, gracefully fall back to a driver described solely by its SFDP
-tables.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
-Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
-Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
-Link: https://lore.kernel.org/r/20220810220654.1297699-7-michael@walle.cc
----
- drivers/mtd/spi-nor/core.c | 26 ++++++++++++++++++++++++--
- drivers/mtd/spi-nor/core.h |  1 +
- drivers/mtd/spi-nor/sfdp.c | 27 +++++++++++++++++++++++++++
- 3 files changed, 52 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -1636,6 +1636,16 @@ static const struct spi_nor_manufacturer
- 	&spi_nor_xmc,
- };
- 
-+static const struct flash_info spi_nor_generic_flash = {
-+	.name = "spi-nor-generic",
-+	/*
-+	 * JESD216 rev A doesn't specify the page size, therefore we need a
-+	 * sane default.
-+	 */
-+	.page_size = 256,
-+	.parse_sfdp = true,
-+};
-+
- static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
- 						 const u8 *id)
- {
-@@ -1669,6 +1679,14 @@ static const struct flash_info *spi_nor_
- 	}
- 
- 	info = spi_nor_match_id(nor, id);
-+
-+	/* Fallback to a generic flash described only by its SFDP data. */
-+	if (!info) {
-+		ret = spi_nor_check_sfdp_signature(nor);
-+		if (!ret)
-+			info = &spi_nor_generic_flash;
-+	}
-+
- 	if (!info) {
- 		dev_err(nor->dev, "unrecognized JEDEC id bytes: %*ph\n",
- 			SPI_NOR_MAX_ID_LEN, id);
-@@ -2105,8 +2123,12 @@ static int spi_nor_select_pp(struct spi_
-  * spi_nor_select_uniform_erase() - select optimum uniform erase type
-  * @map:		the erase map of the SPI NOR
-  * @wanted_size:	the erase type size to search for. Contains the value of
-- *			info->sector_size or of the "small sector" size in case
-- *			CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined.
-+ *			info->sector_size, the "small sector" size in case
-+ *			CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined or 0 if
-+ *			there is no information about the sector size. The
-+ *			latter is the case if the flash parameters are parsed
-+ *			solely by SFDP, then the largest supported erase type
-+ *			is selected.
-  *
-  * Once the optimum uniform sector erase command is found, disable all the
-  * other.
---- a/drivers/mtd/spi-nor/core.h
-+++ b/drivers/mtd/spi-nor/core.h
-@@ -708,6 +708,8 @@ int spi_nor_controller_ops_read_reg(stru
- int spi_nor_controller_ops_write_reg(struct spi_nor *nor, u8 opcode,
- 				     const u8 *buf, size_t len);
- 
-+int spi_nor_check_sfdp_signature(struct spi_nor *nor);
-+
- static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
- {
- 	return container_of(mtd, struct spi_nor, mtd);
---- a/drivers/mtd/spi-nor/sfdp.c
-+++ b/drivers/mtd/spi-nor/sfdp.c
-@@ -1250,6 +1250,33 @@ static void spi_nor_post_sfdp_fixups(str
- }
- 
- /**
-+ * spi_nor_check_sfdp_signature() - check for a valid SFDP signature
-+ * @nor:	pointer to a 'struct spi_nor'
-+ *
-+ * Used to detect if the flash supports the RDSFDP command as well as the
-+ * presence of a valid SFDP table.
-+ *
-+ * Return: 0 on success, -errno otherwise.
-+ */
-+int spi_nor_check_sfdp_signature(struct spi_nor *nor)
-+{
-+	u32 signature;
-+	int err;
-+
-+	/* Get the SFDP header. */
-+	err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(signature),
-+					   &signature);
-+	if (err < 0)
-+		return err;
-+
-+	/* Check the SFDP signature. */
-+	if (le32_to_cpu(signature) != SFDP_SIGNATURE)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+/**
-  * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
-  * @nor:		pointer to a 'struct spi_nor'
-  *
diff --git a/target/linux/generic/backport-6.1/412-v6.3-02-spidev-Add-Silicon-Labs-SI3210-device-compatible.patch b/target/linux/generic/backport-6.1/412-v6.3-02-spidev-Add-Silicon-Labs-SI3210-device-compatible.patch
deleted file mode 100644
index 1f8501dc1c26..000000000000
--- a/target/linux/generic/backport-6.1/412-v6.3-02-spidev-Add-Silicon-Labs-SI3210-device-compatible.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 6c9d1fd52956c3148e847a214bae9102b1811de5 Mon Sep 17 00:00:00 2001
-From: Vincent Tremblay <vincent@vtremblay.dev>
-Date: Tue, 27 Dec 2022 09:10:08 -0500
-Subject: [PATCH] spidev: Add Silicon Labs SI3210 device compatible
-
-Add compatible string for Silicon Labs SI3210 device.
-
-Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
-Link: https://lore.kernel.org/r/20221227141011.111410-2-vincent@vtremblay.dev
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spidev.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -702,6 +702,7 @@ static const struct spi_device_id spidev
- 	{ .name = "spi-petra" },
- 	{ .name = "spi-authenta" },
- 	{ .name = "em3581" },
-+	{ .name = "si3210" },
- 	{},
- };
- MODULE_DEVICE_TABLE(spi, spidev_spi_ids);
-@@ -730,6 +731,7 @@ static const struct of_device_id spidev_
- 	{ .compatible = "rohm,dh2228fv", .data = &spidev_of_check },
- 	{ .compatible = "semtech,sx1301", .data = &spidev_of_check },
- 	{ .compatible = "silabs,em3581", .data = &spidev_of_check },
-+	{ .compatible = "silabs,si3210", .data = &spidev_of_check },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/target/linux/generic/backport-6.1/421-v6.2-mtd-parsers-add-TP-Link-SafeLoader-partitions-table-.patch b/target/linux/generic/backport-6.1/421-v6.2-mtd-parsers-add-TP-Link-SafeLoader-partitions-table-.patch
deleted file mode 100644
index e570564a0bc5..000000000000
--- a/target/linux/generic/backport-6.1/421-v6.2-mtd-parsers-add-TP-Link-SafeLoader-partitions-table-.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From aec4d5f5ffd0f0092bd9dc21ea90e0bc237d4b74 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 15 Oct 2022 11:29:50 +0200
-Subject: [PATCH] mtd: parsers: add TP-Link SafeLoader partitions table parser
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This parser deals with most TP-Link home routers. It reads info about
-partitions and registers them in the MTD subsystem.
-
-Example from TP-Link Archer C5 V2:
-
-spi-nor spi0.0: s25fl128s1 (16384 Kbytes)
-15 tplink-safeloader partitions found on MTD device spi0.0
-Creating 15 MTD partitions on "spi0.0":
-0x000000000000-0x000000040000 : "fs-uboot"
-0x000000040000-0x000000440000 : "os-image"
-0x000000440000-0x000000e40000 : "rootfs"
-0x000000e40000-0x000000e40200 : "default-mac"
-0x000000e40200-0x000000e40400 : "pin"
-0x000000e40400-0x000000e40600 : "product-info"
-0x000000e50000-0x000000e60000 : "partition-table"
-0x000000e60000-0x000000e60200 : "soft-version"
-0x000000e61000-0x000000e70000 : "support-list"
-0x000000e70000-0x000000e80000 : "profile"
-0x000000e80000-0x000000e90000 : "default-config"
-0x000000e90000-0x000000ee0000 : "user-config"
-0x000000ee0000-0x000000fe0000 : "log"
-0x000000fe0000-0x000000ff0000 : "radio_bk"
-0x000000ff0000-0x000001000000 : "radio"
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221015092950.27467-2-zajec5@gmail.com
----
- drivers/mtd/parsers/Kconfig             |  15 +++
- drivers/mtd/parsers/Makefile            |   1 +
- drivers/mtd/parsers/tplink_safeloader.c | 150 ++++++++++++++++++++++++
- 3 files changed, 166 insertions(+)
- create mode 100644 drivers/mtd/parsers/tplink_safeloader.c
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -123,6 +123,21 @@ config MTD_AFS_PARTS
- 	  for your particular device. It won't happen automatically. The
- 	  'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
- 
-+config MTD_PARSER_TPLINK_SAFELOADER
-+	tristate "TP-Link Safeloader partitions parser"
-+	depends on MTD && (ARCH_BCM_5301X || ATH79 || SOC_MT7620 || SOC_MT7621 || COMPILE_TEST)
-+	help
-+	  TP-Link home routers use flash partitions to store various data. Info
-+	  about flash space layout is stored in a partitions table using a
-+	  custom ASCII-based format.
-+
-+	  That format was first found in devices with SafeLoader bootloader and
-+	  was named after it. Later it was adapted to CFE and U-Boot
-+	  bootloaders.
-+
-+	  This driver reads partitions table, parses it and creates MTD
-+	  partitions.
-+
- config MTD_PARSER_TRX
- 	tristate "Parser for TRX format partitions"
- 	depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST)
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -10,6 +10,7 @@ ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+=
- ofpart-$(CONFIG_MTD_OF_PARTS_LINKSYS_NS)+= ofpart_linksys_ns.o
- obj-$(CONFIG_MTD_PARSER_IMAGETAG)	+= parser_imagetag.o
- obj-$(CONFIG_MTD_AFS_PARTS)		+= afs.o
-+obj-$(CONFIG_MTD_PARSER_TPLINK_SAFELOADER)	+= tplink_safeloader.o
- obj-$(CONFIG_MTD_PARSER_TRX)		+= parser_trx.o
- obj-$(CONFIG_MTD_SERCOMM_PARTS)		+= scpart.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
---- /dev/null
-+++ b/drivers/mtd/parsers/tplink_safeloader.c
-@@ -0,0 +1,150 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright © 2022 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-+#include <linux/slab.h>
-+
-+#define TPLINK_SAFELOADER_DATA_OFFSET		4
-+#define TPLINK_SAFELOADER_MAX_PARTS		32
-+
-+struct safeloader_cmn_header {
-+	__be32 size;
-+	uint32_t unused;
-+} __packed;
-+
-+static void *mtd_parser_tplink_safeloader_read_table(struct mtd_info *mtd)
-+{
-+	struct safeloader_cmn_header hdr;
-+	struct device_node *np;
-+	size_t bytes_read;
-+	size_t offset;
-+	size_t size;
-+	char *buf;
-+	int err;
-+
-+	np = mtd_get_of_node(mtd);
-+	if (mtd_is_partition(mtd))
-+		of_node_get(np);
-+	else
-+		np = of_get_child_by_name(np, "partitions");
-+
-+	if (of_property_read_u32(np, "partitions-table-offset", (u32 *)&offset)) {
-+		pr_err("Failed to get partitions table offset\n");
-+		goto err_put;
-+	}
-+
-+	err = mtd_read(mtd, offset, sizeof(hdr), &bytes_read, (uint8_t *)&hdr);
-+	if (err && !mtd_is_bitflip(err)) {
-+		pr_err("Failed to read from %s at 0x%zx\n", mtd->name, offset);
-+		goto err_put;
-+	}
-+
-+	size = be32_to_cpu(hdr.size);
-+
-+	buf = kmalloc(size + 1, GFP_KERNEL);
-+	if (!buf)
-+		goto err_put;
-+
-+	err = mtd_read(mtd, offset + sizeof(hdr), size, &bytes_read, buf);
-+	if (err && !mtd_is_bitflip(err)) {
-+		pr_err("Failed to read from %s at 0x%zx\n", mtd->name, offset + sizeof(hdr));
-+		goto err_kfree;
-+	}
-+
-+	buf[size] = '\0';
-+
-+	of_node_put(np);
-+
-+	return buf;
-+
-+err_kfree:
-+	kfree(buf);
-+err_put:
-+	of_node_put(np);
-+	return NULL;
-+}
-+
-+static int mtd_parser_tplink_safeloader_parse(struct mtd_info *mtd,
-+					      const struct mtd_partition **pparts,
-+					      struct mtd_part_parser_data *data)
-+{
-+	struct mtd_partition *parts;
-+	char name[65];
-+	size_t offset;
-+	size_t bytes;
-+	char *buf;
-+	int idx;
-+	int err;
-+
-+	parts = kcalloc(TPLINK_SAFELOADER_MAX_PARTS, sizeof(*parts), GFP_KERNEL);
-+	if (!parts) {
-+		err = -ENOMEM;
-+		goto err_out;
-+	}
-+
-+	buf = mtd_parser_tplink_safeloader_read_table(mtd);
-+	if (!buf) {
-+		err = -ENOENT;
-+		goto err_out;
-+	}
-+
-+	for (idx = 0, offset = TPLINK_SAFELOADER_DATA_OFFSET;
-+	     idx < TPLINK_SAFELOADER_MAX_PARTS &&
-+	     sscanf(buf + offset, "partition %64s base 0x%llx size 0x%llx%zn\n",
-+		    name, &parts[idx].offset, &parts[idx].size, &bytes) == 3;
-+	     idx++, offset += bytes + 1) {
-+		parts[idx].name = kstrdup(name, GFP_KERNEL);
-+		if (!parts[idx].name) {
-+			err = -ENOMEM;
-+			goto err_free;
-+		}
-+	}
-+
-+	if (idx == TPLINK_SAFELOADER_MAX_PARTS)
-+		pr_warn("Reached maximum number of partitions!\n");
-+
-+	kfree(buf);
-+
-+	*pparts = parts;
-+
-+	return idx;
-+
-+err_free:
-+	for (idx -= 1; idx >= 0; idx--)
-+		kfree(parts[idx].name);
-+err_out:
-+	return err;
-+};
-+
-+static void mtd_parser_tplink_safeloader_cleanup(const struct mtd_partition *pparts,
-+						 int nr_parts)
-+{
-+	int i;
-+
-+	for (i = 0; i < nr_parts; i++)
-+		kfree(pparts[i].name);
-+
-+	kfree(pparts);
-+}
-+
-+static const struct of_device_id mtd_parser_tplink_safeloader_of_match_table[] = {
-+	{ .compatible = "tplink,safeloader-partitions" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, mtd_parser_tplink_safeloader_of_match_table);
-+
-+static struct mtd_part_parser mtd_parser_tplink_safeloader = {
-+	.parse_fn = mtd_parser_tplink_safeloader_parse,
-+	.cleanup = mtd_parser_tplink_safeloader_cleanup,
-+	.name = "tplink-safeloader",
-+	.of_match_table = mtd_parser_tplink_safeloader_of_match_table,
-+};
-+module_mtd_part_parser(mtd_parser_tplink_safeloader);
-+
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-6.1/423-v6.3-mtd-spinand-macronix-use-scratch-buffer-for-DMA-oper.patch b/target/linux/generic/backport-6.1/423-v6.3-mtd-spinand-macronix-use-scratch-buffer-for-DMA-oper.patch
deleted file mode 100644
index 7dbc2717250b..000000000000
--- a/target/linux/generic/backport-6.1/423-v6.3-mtd-spinand-macronix-use-scratch-buffer-for-DMA-oper.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From ebed787a0becb9354f0a23620a5130cccd6c730c Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 19 Jan 2023 03:45:43 +0000
-Subject: [PATCH] mtd: spinand: macronix: use scratch buffer for DMA operation
-
-The mx35lf1ge4ab_get_eccsr() function uses an SPI DMA operation to
-read the eccsr, hence the buffer should not be on stack. Since commit
-380583227c0c7f ("spi: spi-mem: Add extra sanity checks on the op param")
-the kernel emmits a warning and blocks such operations.
-
-Use the scratch buffer to get eccsr instead of trying to directly read
-into a stack-allocated variable.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Dhruva Gole <d-gole@ti.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/Y8i85zM0u4XdM46z@makrotopia.org
----
- drivers/mtd/nand/spi/macronix.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/nand/spi/macronix.c
-+++ b/drivers/mtd/nand/spi/macronix.c
-@@ -83,9 +83,10 @@ static int mx35lf1ge4ab_ecc_get_status(s
- 		 * in order to avoid forcing the wear-leveling layer to move
- 		 * data around if it's not necessary.
- 		 */
--		if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr))
-+		if (mx35lf1ge4ab_get_eccsr(spinand, spinand->scratchbuf))
- 			return nanddev_get_ecc_conf(nand)->strength;
- 
-+		eccsr = *spinand->scratchbuf;
- 		if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength ||
- 			    !eccsr))
- 			return nanddev_get_ecc_conf(nand)->strength;
diff --git a/target/linux/generic/backport-6.1/424-v6.3-mtd-ubi-wire-up-parent-MTD-device.patch b/target/linux/generic/backport-6.1/424-v6.3-mtd-ubi-wire-up-parent-MTD-device.patch
deleted file mode 100644
index 657404196d37..000000000000
--- a/target/linux/generic/backport-6.1/424-v6.3-mtd-ubi-wire-up-parent-MTD-device.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 1ecf9e390452e73a362ea7fbde8f3f0db83de856 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 22 Dec 2022 19:33:04 +0000
-Subject: [PATCH] mtd: ubi: wire-up parent MTD device
-
-Wire up the device parent pointer of UBI devices to their lower MTD
-device, typically an MTD partition or whole-chip device.
-
-The most noticeable change is that in sysfs, previously ubi devices
-would be could in /sys/devices/virtual/ubi while after this change they
-would be correctly attached to their parent MTD device, e.g.
-
-/sys/devices/platform/1100d000.spi/spi_master/spi1/spi1.0/mtd/mtd2/ubi0.
-
-Locating UBI devices using /sys/class/ubi/ of course still works as
-well.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- drivers/mtd/ubi/build.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -929,6 +929,7 @@ int ubi_attach_mtd_dev(struct mtd_info *
- 	ubi->dev.release = dev_release;
- 	ubi->dev.class = &ubi_class;
- 	ubi->dev.groups = ubi_dev_groups;
-+	ubi->dev.parent = &mtd->dev;
- 
- 	ubi->mtd = mtd;
- 	ubi->ubi_num = ubi_num;
diff --git a/target/linux/generic/backport-6.1/425-v6.3-mtd-ubi-block-wire-up-device-parent.patch b/target/linux/generic/backport-6.1/425-v6.3-mtd-ubi-block-wire-up-device-parent.patch
deleted file mode 100644
index 48bf98611847..000000000000
--- a/target/linux/generic/backport-6.1/425-v6.3-mtd-ubi-block-wire-up-device-parent.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 05b8773ca33253ea562be145cf3145b05ef19f86 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 22 Dec 2022 19:33:31 +0000
-Subject: [PATCH] mtd: ubi: block: wire-up device parent
-
-ubiblock devices were previously only identifyable by their name, but
-not connected to their parent UBI volume device e.g. in sysfs.
-Properly parent ubiblock device as descendant of a UBI volume device
-to reflect device model hierachy.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Richard Weinberger <richard@nod.at>
----
- drivers/mtd/ubi/block.c | 2 +-
- drivers/mtd/ubi/kapi.c  | 1 +
- include/linux/mtd/ubi.h | 1 +
- 3 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -452,7 +452,7 @@ int ubiblock_create(struct ubi_volume_in
- 	list_add_tail(&dev->list, &ubiblock_devices);
- 
- 	/* Must be the last step: anyone can call file ops from now on */
--	ret = add_disk(dev->gd);
-+	ret = device_add_disk(vi->dev, dev->gd, NULL);
- 	if (ret)
- 		goto out_destroy_wq;
- 
---- a/drivers/mtd/ubi/kapi.c
-+++ b/drivers/mtd/ubi/kapi.c
-@@ -79,6 +79,7 @@ void ubi_do_get_volume_info(struct ubi_d
- 	vi->name_len = vol->name_len;
- 	vi->name = vol->name;
- 	vi->cdev = vol->cdev.dev;
-+	vi->dev = &vol->dev;
- }
- 
- /**
---- a/include/linux/mtd/ubi.h
-+++ b/include/linux/mtd/ubi.h
-@@ -110,6 +110,7 @@ struct ubi_volume_info {
- 	int name_len;
- 	const char *name;
- 	dev_t cdev;
-+	struct device *dev;
- };
- 
- /**
diff --git a/target/linux/generic/backport-6.1/426-v6.4-0004-mtd-core-prepare-mtd_otp_nvmem_add-to-handle-EPROBE_.patch b/target/linux/generic/backport-6.1/426-v6.4-0004-mtd-core-prepare-mtd_otp_nvmem_add-to-handle-EPROBE_.patch
deleted file mode 100644
index 28f54d9e5e5a..000000000000
--- a/target/linux/generic/backport-6.1/426-v6.4-0004-mtd-core-prepare-mtd_otp_nvmem_add-to-handle-EPROBE_.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 281f7a6c1a33fffcde32001bacbb4f672140fbf9 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Wed, 8 Mar 2023 09:20:21 +0100
-Subject: [PATCH] mtd: core: prepare mtd_otp_nvmem_add() to handle
- -EPROBE_DEFER
-
-NVMEM soon will get the ability for nvmem layouts and these might
-not be ready when nvmem_register() is called and thus it might
-return -EPROBE_DEFER. Don't print the error message in this case.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20230308082021.870459-4-michael@walle.cc
----
- drivers/mtd/mtdcore.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -955,8 +955,8 @@ static int mtd_otp_nvmem_add(struct mtd_
- 			nvmem = mtd_otp_nvmem_register(mtd, "user-otp", size,
- 						       mtd_nvmem_user_otp_reg_read);
- 			if (IS_ERR(nvmem)) {
--				dev_err(dev, "Failed to register OTP NVMEM device\n");
--				return PTR_ERR(nvmem);
-+				err = PTR_ERR(nvmem);
-+				goto err;
- 			}
- 			mtd->otp_user_nvmem = nvmem;
- 		}
-@@ -973,7 +973,6 @@ static int mtd_otp_nvmem_add(struct mtd_
- 			nvmem = mtd_otp_nvmem_register(mtd, "factory-otp", size,
- 						       mtd_nvmem_fact_otp_reg_read);
- 			if (IS_ERR(nvmem)) {
--				dev_err(dev, "Failed to register OTP NVMEM device\n");
- 				err = PTR_ERR(nvmem);
- 				goto err;
- 			}
-@@ -985,7 +984,7 @@ static int mtd_otp_nvmem_add(struct mtd_
- 
- err:
- 	nvmem_unregister(mtd->otp_user_nvmem);
--	return err;
-+	return dev_err_probe(dev, err, "Failed to register OTP NVMEM device\n");
- }
- 
- /**
diff --git a/target/linux/generic/backport-6.1/600-v6.9-01-net-gro-parse-ipv6-ext-headers-without-frag0-invalid.patch b/target/linux/generic/backport-6.1/600-v6.9-01-net-gro-parse-ipv6-ext-headers-without-frag0-invalid.patch
deleted file mode 100644
index 6dbec3c75244..000000000000
--- a/target/linux/generic/backport-6.1/600-v6.9-01-net-gro-parse-ipv6-ext-headers-without-frag0-invalid.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From: Richard Gobert <richardbgobert@gmail.com>
-Date: Wed, 3 Jan 2024 15:44:21 +0100
-Subject: [PATCH] net: gro: parse ipv6 ext headers without frag0 invalidation
-
-The existing code always pulls the IPv6 header and sets the transport
-offset initially. Then optionally again pulls any extension headers in
-ipv6_gso_pull_exthdrs and sets the transport offset again on return from
-that call. skb->data is set at the start of the first extension header
-before calling ipv6_gso_pull_exthdrs, and must disable the frag0
-optimization because that function uses pskb_may_pull/pskb_pull instead of
-skb_gro_ helpers. It sets the GRO offset to the TCP header with
-skb_gro_pull and sets the transport header. Then returns skb->data to its
-position before this block.
-
-This commit introduces a new helper function - ipv6_gro_pull_exthdrs -
-which is used in ipv6_gro_receive to pull ipv6 ext headers instead of
-ipv6_gso_pull_exthdrs. Thus, there is no modification of skb->data, all
-operations use skb_gro_* helpers, and the frag0 fast path can be taken for
-IPv6 packets with ext headers.
-
-Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
-Reviewed-by: Willem de Bruijn <willemb@google.com>
-Reviewed-by: David Ahern <dsahern@kernel.org>
-Reviewed-by: Eric Dumazet <edumazet@google.com>
-Link: https://lore.kernel.org/r/504130f6-b56c-4dcc-882c-97942c59f5b7@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -36,6 +36,40 @@
- 		INDIRECT_CALL_L4(cb, f2, f1, head, skb);	\
- })
- 
-+static int ipv6_gro_pull_exthdrs(struct sk_buff *skb, int off, int proto)
-+{
-+	const struct net_offload *ops = NULL;
-+	struct ipv6_opt_hdr *opth;
-+
-+	for (;;) {
-+		int len;
-+
-+		ops = rcu_dereference(inet6_offloads[proto]);
-+
-+		if (unlikely(!ops))
-+			break;
-+
-+		if (!(ops->flags & INET6_PROTO_GSO_EXTHDR))
-+			break;
-+
-+		opth = skb_gro_header(skb, off + sizeof(*opth), off);
-+		if (unlikely(!opth))
-+			break;
-+
-+		len = ipv6_optlen(opth);
-+
-+		opth = skb_gro_header(skb, off + len, off);
-+		if (unlikely(!opth))
-+			break;
-+		proto = opth->nexthdr;
-+
-+		off += len;
-+	}
-+
-+	skb_gro_pull(skb, off - skb_network_offset(skb));
-+	return proto;
-+}
-+
- static int ipv6_gso_pull_exthdrs(struct sk_buff *skb, int proto)
- {
- 	const struct net_offload *ops = NULL;
-@@ -224,28 +258,25 @@ INDIRECT_CALLABLE_SCOPE struct sk_buff *
- 		goto out;
- 
- 	skb_set_network_header(skb, off);
--	skb_gro_pull(skb, sizeof(*iph));
--	skb_set_transport_header(skb, skb_gro_offset(skb));
- 
--	flush += ntohs(iph->payload_len) != skb_gro_len(skb);
-+	flush += ntohs(iph->payload_len) != skb->len - hlen;
- 
- 	proto = iph->nexthdr;
- 	ops = rcu_dereference(inet6_offloads[proto]);
- 	if (!ops || !ops->callbacks.gro_receive) {
--		pskb_pull(skb, skb_gro_offset(skb));
--		skb_gro_frag0_invalidate(skb);
--		proto = ipv6_gso_pull_exthdrs(skb, proto);
--		skb_gro_pull(skb, -skb_transport_offset(skb));
--		skb_reset_transport_header(skb);
--		__skb_push(skb, skb_gro_offset(skb));
-+		proto = ipv6_gro_pull_exthdrs(skb, hlen, proto);
- 
- 		ops = rcu_dereference(inet6_offloads[proto]);
- 		if (!ops || !ops->callbacks.gro_receive)
- 			goto out;
- 
--		iph = ipv6_hdr(skb);
-+		iph = skb_gro_network_header(skb);
-+	} else {
-+		skb_gro_pull(skb, sizeof(*iph));
- 	}
- 
-+	skb_set_transport_header(skb, skb_gro_offset(skb));
-+
- 	NAPI_GRO_CB(skb)->proto = proto;
- 
- 	flush--;
diff --git a/target/linux/generic/backport-6.1/611-v6.3-net-add-helper-eth_addr_add.patch b/target/linux/generic/backport-6.1/611-v6.3-net-add-helper-eth_addr_add.patch
deleted file mode 100644
index 28b7b4383e64..000000000000
--- a/target/linux/generic/backport-6.1/611-v6.3-net-add-helper-eth_addr_add.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 7390609b0121a1b982c5ecdfcd72dc328e5784ee Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:42 +0000
-Subject: [PATCH] net: add helper eth_addr_add()
-
-Add a helper to add an offset to a ethernet address. This comes in handy
-if you have a base ethernet address for multiple interfaces.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- include/linux/etherdevice.h | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -508,6 +508,20 @@ static inline void eth_addr_inc(u8 *addr
- }
- 
- /**
-+ * eth_addr_add() - Add (or subtract) an offset to/from the given MAC address.
-+ *
-+ * @offset: Offset to add.
-+ * @addr: Pointer to a six-byte array containing Ethernet address to increment.
-+ */
-+static inline void eth_addr_add(u8 *addr, long offset)
-+{
-+	u64 u = ether_addr_to_u64(addr);
-+
-+	u += offset;
-+	u64_to_ether_addr(u, addr);
-+}
-+
-+/**
-  * is_etherdev_addr - Tell if given Ethernet address belongs to the device.
-  * @dev: Pointer to a device structure
-  * @addr: Pointer to a six-byte array containing the Ethernet address
diff --git a/target/linux/generic/backport-6.1/701-net-next-net-sfp-add-quirk-for-Fiberstone-GPON-ONU-34-20BI.patch b/target/linux/generic/backport-6.1/701-net-next-net-sfp-add-quirk-for-Fiberstone-GPON-ONU-34-20BI.patch
deleted file mode 100644
index 56e14c5c0a90..000000000000
--- a/target/linux/generic/backport-6.1/701-net-next-net-sfp-add-quirk-for-Fiberstone-GPON-ONU-34-20BI.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From d387e34fec407f881fdf165b5d7ec128ebff362f Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 19 Sep 2023 14:47:20 +0200
-Subject: [PATCH] net: sfp: add quirk for Fiberstone GPON-ONU-34-20BI
-
-Fiberstone GPON-ONU-34-20B can operate at 2500base-X, but report 1.2GBd
-NRZ in their EEPROM.
-
-The module also require the ignore tx fault fixup similar to Huawei MA5671A
-as it gets disabled on error messages with serial redirection enabled.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Link: https://lore.kernel.org/r/20230919124720.8210-1-ansuelsmth@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/phy/sfp.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -393,6 +393,11 @@ static const struct sfp_quirk sfp_quirks
- 	SFP_QUIRK("ALCATELLUCENT", "3FE46541AA", sfp_quirk_2500basex,
- 		  sfp_fixup_long_startup),
- 
-+	// Fiberstore GPON-ONU-34-20BI can operate at 2500base-X, but report 1.2GBd
-+	// NRZ in their EEPROM
-+	SFP_QUIRK("FS", "GPON-ONU-34-20BI", sfp_quirk_2500basex,
-+		  sfp_fixup_ignore_tx_fault),
-+
- 	SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp),
- 
- 	// HG MXPD-483II-F 2.5G supports 2500Base-X, but incorrectly reports
diff --git a/target/linux/generic/backport-6.1/702-01-v6.7-net-phy-aquantia-move-to-separate-directory.patch b/target/linux/generic/backport-6.1/702-01-v6.7-net-phy-aquantia-move-to-separate-directory.patch
deleted file mode 100644
index 0cad6c53d428..000000000000
--- a/target/linux/generic/backport-6.1/702-01-v6.7-net-phy-aquantia-move-to-separate-directory.patch
+++ /dev/null
@@ -1,2306 +0,0 @@
-From d2213db3f49bce8e7a87c8de05b9a091f78f654e Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 14 Nov 2023 15:08:41 +0100
-Subject: [PATCH 1/3] net: phy: aquantia: move to separate directory
-
-Move aquantia PHY driver to separate driectory in preparation for
-firmware loading support to keep things tidy.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/Kconfig                         | 5 +----
- drivers/net/phy/Makefile                        | 6 +-----
- drivers/net/phy/aquantia/Kconfig                | 5 +++++
- drivers/net/phy/aquantia/Makefile               | 6 ++++++
- drivers/net/phy/{ => aquantia}/aquantia.h       | 0
- drivers/net/phy/{ => aquantia}/aquantia_hwmon.c | 0
- drivers/net/phy/{ => aquantia}/aquantia_main.c  | 0
- 7 files changed, 13 insertions(+), 9 deletions(-)
- create mode 100644 drivers/net/phy/aquantia/Kconfig
- create mode 100644 drivers/net/phy/aquantia/Makefile
- rename drivers/net/phy/{ => aquantia}/aquantia.h (100%)
- rename drivers/net/phy/{ => aquantia}/aquantia_hwmon.c (100%)
- rename drivers/net/phy/{ => aquantia}/aquantia_main.c (100%)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -90,10 +90,7 @@ config ADIN1100_PHY
- 	  Currently supports the:
- 	  - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
- 
--config AQUANTIA_PHY
--	tristate "Aquantia PHYs"
--	help
--	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
-+source "drivers/net/phy/aquantia/Kconfig"
- 
- config AX88796B_PHY
- 	tristate "Asix PHYs"
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -33,11 +33,7 @@ obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
- obj-$(CONFIG_ADIN_PHY)		+= adin.o
- obj-$(CONFIG_ADIN1100_PHY)	+= adin1100.o
- obj-$(CONFIG_AMD_PHY)		+= amd.o
--aquantia-objs			+= aquantia_main.o
--ifdef CONFIG_HWMON
--aquantia-objs			+= aquantia_hwmon.o
--endif
--obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
-+obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia/
- obj-$(CONFIG_AT803X_PHY)	+= at803x.o
- obj-$(CONFIG_AX88796B_PHY)	+= ax88796b.o
- obj-$(CONFIG_BCM54140_PHY)	+= bcm54140.o
---- /dev/null
-+++ b/drivers/net/phy/aquantia/Kconfig
-@@ -0,0 +1,5 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+config AQUANTIA_PHY
-+	tristate "Aquantia PHYs"
-+	help
-+	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
---- /dev/null
-+++ b/drivers/net/phy/aquantia/Makefile
-@@ -0,0 +1,6 @@
-+# SPDX-License-Identifier: GPL-2.0
-+aquantia-objs			+= aquantia_main.o
-+ifdef CONFIG_HWMON
-+aquantia-objs			+= aquantia_hwmon.o
-+endif
-+obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
---- a/drivers/net/phy/aquantia.h
-+++ /dev/null
-@@ -1,16 +0,0 @@
--/* SPDX-License-Identifier: GPL-2.0 */
--/* HWMON driver for Aquantia PHY
-- *
-- * Author: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
-- * Author: Andrew Lunn <andrew@lunn.ch>
-- * Author: Heiner Kallweit <hkallweit1@gmail.com>
-- */
--
--#include <linux/device.h>
--#include <linux/phy.h>
--
--#if IS_REACHABLE(CONFIG_HWMON)
--int aqr_hwmon_probe(struct phy_device *phydev);
--#else
--static inline int aqr_hwmon_probe(struct phy_device *phydev) { return 0; }
--#endif
---- /dev/null
-+++ b/drivers/net/phy/aquantia/aquantia.h
-@@ -0,0 +1,16 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/* HWMON driver for Aquantia PHY
-+ *
-+ * Author: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
-+ * Author: Andrew Lunn <andrew@lunn.ch>
-+ * Author: Heiner Kallweit <hkallweit1@gmail.com>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/phy.h>
-+
-+#if IS_REACHABLE(CONFIG_HWMON)
-+int aqr_hwmon_probe(struct phy_device *phydev);
-+#else
-+static inline int aqr_hwmon_probe(struct phy_device *phydev) { return 0; }
-+#endif
---- /dev/null
-+++ b/drivers/net/phy/aquantia/aquantia_hwmon.c
-@@ -0,0 +1,250 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* HWMON driver for Aquantia PHY
-+ *
-+ * Author: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
-+ * Author: Andrew Lunn <andrew@lunn.ch>
-+ * Author: Heiner Kallweit <hkallweit1@gmail.com>
-+ */
-+
-+#include <linux/phy.h>
-+#include <linux/device.h>
-+#include <linux/ctype.h>
-+#include <linux/hwmon.h>
-+
-+#include "aquantia.h"
-+
-+/* Vendor specific 1, MDIO_MMD_VEND2 */
-+#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
-+#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
-+#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
-+#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
-+#define VEND1_THERMAL_STAT1			0xc820
-+#define VEND1_THERMAL_STAT2			0xc821
-+#define VEND1_THERMAL_STAT2_VALID		BIT(0)
-+#define VEND1_GENERAL_STAT1			0xc830
-+#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
-+#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
-+#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
-+#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
-+
-+#if IS_REACHABLE(CONFIG_HWMON)
-+
-+static umode_t aqr_hwmon_is_visible(const void *data,
-+				    enum hwmon_sensor_types type,
-+				    u32 attr, int channel)
-+{
-+	if (type != hwmon_temp)
-+		return 0;
-+
-+	switch (attr) {
-+	case hwmon_temp_input:
-+	case hwmon_temp_min_alarm:
-+	case hwmon_temp_max_alarm:
-+	case hwmon_temp_lcrit_alarm:
-+	case hwmon_temp_crit_alarm:
-+		return 0444;
-+	case hwmon_temp_min:
-+	case hwmon_temp_max:
-+	case hwmon_temp_lcrit:
-+	case hwmon_temp_crit:
-+		return 0644;
-+	default:
-+		return 0;
-+	}
-+}
-+
-+static int aqr_hwmon_get(struct phy_device *phydev, int reg, long *value)
-+{
-+	int temp = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
-+
-+	if (temp < 0)
-+		return temp;
-+
-+	/* 16 bit value is 2's complement with LSB = 1/256th degree Celsius */
-+	*value = (s16)temp * 1000 / 256;
-+
-+	return 0;
-+}
-+
-+static int aqr_hwmon_set(struct phy_device *phydev, int reg, long value)
-+{
-+	int temp;
-+
-+	if (value >= 128000 || value < -128000)
-+		return -ERANGE;
-+
-+	temp = value * 256 / 1000;
-+
-+	/* temp is in s16 range and we're interested in lower 16 bits only */
-+	return phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, (u16)temp);
-+}
-+
-+static int aqr_hwmon_test_bit(struct phy_device *phydev, int reg, int bit)
-+{
-+	int val = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
-+
-+	if (val < 0)
-+		return val;
-+
-+	return !!(val & bit);
-+}
-+
-+static int aqr_hwmon_status1(struct phy_device *phydev, int bit, long *value)
-+{
-+	int val = aqr_hwmon_test_bit(phydev, VEND1_GENERAL_STAT1, bit);
-+
-+	if (val < 0)
-+		return val;
-+
-+	*value = val;
-+
-+	return 0;
-+}
-+
-+static int aqr_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
-+			  u32 attr, int channel, long *value)
-+{
-+	struct phy_device *phydev = dev_get_drvdata(dev);
-+	int reg;
-+
-+	if (type != hwmon_temp)
-+		return -EOPNOTSUPP;
-+
-+	switch (attr) {
-+	case hwmon_temp_input:
-+		reg = aqr_hwmon_test_bit(phydev, VEND1_THERMAL_STAT2,
-+					 VEND1_THERMAL_STAT2_VALID);
-+		if (reg < 0)
-+			return reg;
-+		if (!reg)
-+			return -EBUSY;
-+
-+		return aqr_hwmon_get(phydev, VEND1_THERMAL_STAT1, value);
-+
-+	case hwmon_temp_lcrit:
-+		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
-+				     value);
-+	case hwmon_temp_min:
-+		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
-+				     value);
-+	case hwmon_temp_max:
-+		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
-+				     value);
-+	case hwmon_temp_crit:
-+		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
-+				     value);
-+	case hwmon_temp_lcrit_alarm:
-+		return aqr_hwmon_status1(phydev,
-+					 VEND1_GENERAL_STAT1_LOW_TEMP_FAIL,
-+					 value);
-+	case hwmon_temp_min_alarm:
-+		return aqr_hwmon_status1(phydev,
-+					 VEND1_GENERAL_STAT1_LOW_TEMP_WARN,
-+					 value);
-+	case hwmon_temp_max_alarm:
-+		return aqr_hwmon_status1(phydev,
-+					 VEND1_GENERAL_STAT1_HIGH_TEMP_WARN,
-+					 value);
-+	case hwmon_temp_crit_alarm:
-+		return aqr_hwmon_status1(phydev,
-+					 VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL,
-+					 value);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+static int aqr_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
-+			   u32 attr, int channel, long value)
-+{
-+	struct phy_device *phydev = dev_get_drvdata(dev);
-+
-+	if (type != hwmon_temp)
-+		return -EOPNOTSUPP;
-+
-+	switch (attr) {
-+	case hwmon_temp_lcrit:
-+		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
-+				     value);
-+	case hwmon_temp_min:
-+		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
-+				     value);
-+	case hwmon_temp_max:
-+		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
-+				     value);
-+	case hwmon_temp_crit:
-+		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
-+				     value);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+static const struct hwmon_ops aqr_hwmon_ops = {
-+	.is_visible = aqr_hwmon_is_visible,
-+	.read = aqr_hwmon_read,
-+	.write = aqr_hwmon_write,
-+};
-+
-+static u32 aqr_hwmon_chip_config[] = {
-+	HWMON_C_REGISTER_TZ,
-+	0,
-+};
-+
-+static const struct hwmon_channel_info aqr_hwmon_chip = {
-+	.type = hwmon_chip,
-+	.config = aqr_hwmon_chip_config,
-+};
-+
-+static u32 aqr_hwmon_temp_config[] = {
-+	HWMON_T_INPUT |
-+	HWMON_T_MAX | HWMON_T_MIN |
-+	HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM |
-+	HWMON_T_CRIT | HWMON_T_LCRIT |
-+	HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM,
-+	0,
-+};
-+
-+static const struct hwmon_channel_info aqr_hwmon_temp = {
-+	.type = hwmon_temp,
-+	.config = aqr_hwmon_temp_config,
-+};
-+
-+static const struct hwmon_channel_info *aqr_hwmon_info[] = {
-+	&aqr_hwmon_chip,
-+	&aqr_hwmon_temp,
-+	NULL,
-+};
-+
-+static const struct hwmon_chip_info aqr_hwmon_chip_info = {
-+	.ops = &aqr_hwmon_ops,
-+	.info = aqr_hwmon_info,
-+};
-+
-+int aqr_hwmon_probe(struct phy_device *phydev)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	struct device *hwmon_dev;
-+	char *hwmon_name;
-+	int i, j;
-+
-+	hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
-+	if (!hwmon_name)
-+		return -ENOMEM;
-+
-+	for (i = j = 0; hwmon_name[i]; i++) {
-+		if (isalnum(hwmon_name[i])) {
-+			if (i != j)
-+				hwmon_name[j] = hwmon_name[i];
-+			j++;
-+		}
-+	}
-+	hwmon_name[j] = '\0';
-+
-+	hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name,
-+					phydev, &aqr_hwmon_chip_info, NULL);
-+
-+	return PTR_ERR_OR_ZERO(hwmon_dev);
-+}
-+
-+#endif
---- /dev/null
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -0,0 +1,842 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Driver for Aquantia PHY
-+ *
-+ * Author: Shaohui Xie <Shaohui.Xie@freescale.com>
-+ *
-+ * Copyright 2015 Freescale Semiconductor, Inc.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/bitfield.h>
-+#include <linux/phy.h>
-+
-+#include "aquantia.h"
-+
-+#define PHY_ID_AQ1202	0x03a1b445
-+#define PHY_ID_AQ2104	0x03a1b460
-+#define PHY_ID_AQR105	0x03a1b4a2
-+#define PHY_ID_AQR106	0x03a1b4d0
-+#define PHY_ID_AQR107	0x03a1b4e0
-+#define PHY_ID_AQCS109	0x03a1b5c2
-+#define PHY_ID_AQR405	0x03a1b4b0
-+#define PHY_ID_AQR113C	0x31c31c12
-+
-+#define MDIO_PHYXS_VEND_IF_STATUS		0xe812
-+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR	0
-+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX	1
-+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI	2
-+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII	3
-+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI	4
-+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII	6
-+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI	7
-+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII	10
-+
-+#define MDIO_AN_VEND_PROV			0xc400
-+#define MDIO_AN_VEND_PROV_1000BASET_FULL	BIT(15)
-+#define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
-+#define MDIO_AN_VEND_PROV_5000BASET_FULL	BIT(11)
-+#define MDIO_AN_VEND_PROV_2500BASET_FULL	BIT(10)
-+#define MDIO_AN_VEND_PROV_DOWNSHIFT_EN		BIT(4)
-+#define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK	GENMASK(3, 0)
-+#define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT	4
-+
-+#define MDIO_AN_TX_VEND_STATUS1			0xc800
-+#define MDIO_AN_TX_VEND_STATUS1_RATE_MASK	GENMASK(3, 1)
-+#define MDIO_AN_TX_VEND_STATUS1_10BASET		0
-+#define MDIO_AN_TX_VEND_STATUS1_100BASETX	1
-+#define MDIO_AN_TX_VEND_STATUS1_1000BASET	2
-+#define MDIO_AN_TX_VEND_STATUS1_10GBASET	3
-+#define MDIO_AN_TX_VEND_STATUS1_2500BASET	4
-+#define MDIO_AN_TX_VEND_STATUS1_5000BASET	5
-+#define MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX	BIT(0)
-+
-+#define MDIO_AN_TX_VEND_INT_STATUS1		0xcc00
-+#define MDIO_AN_TX_VEND_INT_STATUS1_DOWNSHIFT	BIT(1)
-+
-+#define MDIO_AN_TX_VEND_INT_STATUS2		0xcc01
-+#define MDIO_AN_TX_VEND_INT_STATUS2_MASK	BIT(0)
-+
-+#define MDIO_AN_TX_VEND_INT_MASK2		0xd401
-+#define MDIO_AN_TX_VEND_INT_MASK2_LINK		BIT(0)
-+
-+#define MDIO_AN_RX_LP_STAT1			0xe820
-+#define MDIO_AN_RX_LP_STAT1_1000BASET_FULL	BIT(15)
-+#define MDIO_AN_RX_LP_STAT1_1000BASET_HALF	BIT(14)
-+#define MDIO_AN_RX_LP_STAT1_SHORT_REACH		BIT(13)
-+#define MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT	BIT(12)
-+#define MDIO_AN_RX_LP_STAT1_AQ_PHY		BIT(2)
-+
-+#define MDIO_AN_RX_LP_STAT4			0xe823
-+#define MDIO_AN_RX_LP_STAT4_FW_MAJOR		GENMASK(15, 8)
-+#define MDIO_AN_RX_LP_STAT4_FW_MINOR		GENMASK(7, 0)
-+
-+#define MDIO_AN_RX_VEND_STAT3			0xe832
-+#define MDIO_AN_RX_VEND_STAT3_AFR		BIT(0)
-+
-+/* MDIO_MMD_C22EXT */
-+#define MDIO_C22EXT_STAT_SGMII_RX_GOOD_FRAMES		0xd292
-+#define MDIO_C22EXT_STAT_SGMII_RX_BAD_FRAMES		0xd294
-+#define MDIO_C22EXT_STAT_SGMII_RX_FALSE_CARRIER		0xd297
-+#define MDIO_C22EXT_STAT_SGMII_TX_GOOD_FRAMES		0xd313
-+#define MDIO_C22EXT_STAT_SGMII_TX_BAD_FRAMES		0xd315
-+#define MDIO_C22EXT_STAT_SGMII_TX_FALSE_CARRIER		0xd317
-+#define MDIO_C22EXT_STAT_SGMII_TX_COLLISIONS		0xd318
-+#define MDIO_C22EXT_STAT_SGMII_TX_LINE_COLLISIONS	0xd319
-+#define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR	0xd31a
-+#define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES		0xd31b
-+
-+/* Vendor specific 1, MDIO_MMD_VEND1 */
-+#define VEND1_GLOBAL_FW_ID			0x0020
-+#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
-+#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
-+
-+#define VEND1_GLOBAL_GEN_STAT2			0xc831
-+#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
-+
-+/* The following registers all have similar layouts; first the registers... */
-+#define VEND1_GLOBAL_CFG_10M			0x0310
-+#define VEND1_GLOBAL_CFG_100M			0x031b
-+#define VEND1_GLOBAL_CFG_1G			0x031c
-+#define VEND1_GLOBAL_CFG_2_5G			0x031d
-+#define VEND1_GLOBAL_CFG_5G			0x031e
-+#define VEND1_GLOBAL_CFG_10G			0x031f
-+/* ...and now the fields */
-+#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
-+#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
-+#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
-+#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
-+
-+#define VEND1_GLOBAL_RSVD_STAT1			0xc885
-+#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
-+#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
-+
-+#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
-+#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
-+#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
-+
-+#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
-+#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
-+
-+#define VEND1_GLOBAL_INT_STD_MASK		0xff00
-+#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
-+#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
-+#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
-+#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
-+#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
-+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
-+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
-+#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
-+#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
-+#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
-+#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
-+
-+#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
-+#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
-+#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
-+#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
-+#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
-+#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
-+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
-+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
-+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
-+
-+/* Sleep and timeout for checking if the Processor-Intensive
-+ * MDIO operation is finished
-+ */
-+#define AQR107_OP_IN_PROG_SLEEP		1000
-+#define AQR107_OP_IN_PROG_TIMEOUT	100000
-+
-+struct aqr107_hw_stat {
-+	const char *name;
-+	int reg;
-+	int size;
-+};
-+
-+#define SGMII_STAT(n, r, s) { n, MDIO_C22EXT_STAT_SGMII_ ## r, s }
-+static const struct aqr107_hw_stat aqr107_hw_stats[] = {
-+	SGMII_STAT("sgmii_rx_good_frames",	    RX_GOOD_FRAMES,	26),
-+	SGMII_STAT("sgmii_rx_bad_frames",	    RX_BAD_FRAMES,	26),
-+	SGMII_STAT("sgmii_rx_false_carrier_events", RX_FALSE_CARRIER,	 8),
-+	SGMII_STAT("sgmii_tx_good_frames",	    TX_GOOD_FRAMES,	26),
-+	SGMII_STAT("sgmii_tx_bad_frames",	    TX_BAD_FRAMES,	26),
-+	SGMII_STAT("sgmii_tx_false_carrier_events", TX_FALSE_CARRIER,	 8),
-+	SGMII_STAT("sgmii_tx_collisions",	    TX_COLLISIONS,	 8),
-+	SGMII_STAT("sgmii_tx_line_collisions",	    TX_LINE_COLLISIONS,	 8),
-+	SGMII_STAT("sgmii_tx_frame_alignment_err",  TX_FRAME_ALIGN_ERR,	16),
-+	SGMII_STAT("sgmii_tx_runt_frames",	    TX_RUNT_FRAMES,	22),
-+};
-+#define AQR107_SGMII_STAT_SZ ARRAY_SIZE(aqr107_hw_stats)
-+
-+struct aqr107_priv {
-+	u64 sgmii_stats[AQR107_SGMII_STAT_SZ];
-+};
-+
-+static int aqr107_get_sset_count(struct phy_device *phydev)
-+{
-+	return AQR107_SGMII_STAT_SZ;
-+}
-+
-+static void aqr107_get_strings(struct phy_device *phydev, u8 *data)
-+{
-+	int i;
-+
-+	for (i = 0; i < AQR107_SGMII_STAT_SZ; i++)
-+		strscpy(data + i * ETH_GSTRING_LEN, aqr107_hw_stats[i].name,
-+			ETH_GSTRING_LEN);
-+}
-+
-+static u64 aqr107_get_stat(struct phy_device *phydev, int index)
-+{
-+	const struct aqr107_hw_stat *stat = aqr107_hw_stats + index;
-+	int len_l = min(stat->size, 16);
-+	int len_h = stat->size - len_l;
-+	u64 ret;
-+	int val;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg);
-+	if (val < 0)
-+		return U64_MAX;
-+
-+	ret = val & GENMASK(len_l - 1, 0);
-+	if (len_h) {
-+		val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg + 1);
-+		if (val < 0)
-+			return U64_MAX;
-+
-+		ret += (val & GENMASK(len_h - 1, 0)) << 16;
-+	}
-+
-+	return ret;
-+}
-+
-+static void aqr107_get_stats(struct phy_device *phydev,
-+			     struct ethtool_stats *stats, u64 *data)
-+{
-+	struct aqr107_priv *priv = phydev->priv;
-+	u64 val;
-+	int i;
-+
-+	for (i = 0; i < AQR107_SGMII_STAT_SZ; i++) {
-+		val = aqr107_get_stat(phydev, i);
-+		if (val == U64_MAX)
-+			phydev_err(phydev, "Reading HW Statistics failed for %s\n",
-+				   aqr107_hw_stats[i].name);
-+		else
-+			priv->sgmii_stats[i] += val;
-+
-+		data[i] = priv->sgmii_stats[i];
-+	}
-+}
-+
-+static int aqr_config_aneg(struct phy_device *phydev)
-+{
-+	bool changed = false;
-+	u16 reg;
-+	int ret;
-+
-+	if (phydev->autoneg == AUTONEG_DISABLE)
-+		return genphy_c45_pma_setup_forced(phydev);
-+
-+	ret = genphy_c45_an_config_aneg(phydev);
-+	if (ret < 0)
-+		return ret;
-+	if (ret > 0)
-+		changed = true;
-+
-+	/* Clause 45 has no standardized support for 1000BaseT, therefore
-+	 * use vendor registers for this mode.
-+	 */
-+	reg = 0;
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-+			      phydev->advertising))
-+		reg |= MDIO_AN_VEND_PROV_1000BASET_FULL;
-+
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-+			      phydev->advertising))
-+		reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
-+
-+	/* Handle the case when the 2.5G and 5G speeds are not advertised */
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+			      phydev->advertising))
-+		reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
-+
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
-+			      phydev->advertising))
-+		reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
-+
-+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
-+				     MDIO_AN_VEND_PROV_1000BASET_HALF |
-+				     MDIO_AN_VEND_PROV_1000BASET_FULL |
-+				     MDIO_AN_VEND_PROV_2500BASET_FULL |
-+				     MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
-+	if (ret < 0)
-+		return ret;
-+	if (ret > 0)
-+		changed = true;
-+
-+	return genphy_c45_check_and_restart_aneg(phydev, changed);
-+}
-+
-+static int aqr_config_intr(struct phy_device *phydev)
-+{
-+	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
-+	int err;
-+
-+	if (en) {
-+		/* Clear any pending interrupts before enabling them */
-+		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
-+		if (err < 0)
-+			return err;
-+	}
-+
-+	err = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_MASK2,
-+			    en ? MDIO_AN_TX_VEND_INT_MASK2_LINK : 0);
-+	if (err < 0)
-+		return err;
-+
-+	err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_STD_MASK,
-+			    en ? VEND1_GLOBAL_INT_STD_MASK_ALL : 0);
-+	if (err < 0)
-+		return err;
-+
-+	err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_VEND_MASK,
-+			    en ? VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 |
-+			    VEND1_GLOBAL_INT_VEND_MASK_AN : 0);
-+	if (err < 0)
-+		return err;
-+
-+	if (!en) {
-+		/* Clear any pending interrupts after we have disabled them */
-+		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
-+		if (err < 0)
-+			return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static irqreturn_t aqr_handle_interrupt(struct phy_device *phydev)
-+{
-+	int irq_status;
-+
-+	irq_status = phy_read_mmd(phydev, MDIO_MMD_AN,
-+				  MDIO_AN_TX_VEND_INT_STATUS2);
-+	if (irq_status < 0) {
-+		phy_error(phydev);
-+		return IRQ_NONE;
-+	}
-+
-+	if (!(irq_status & MDIO_AN_TX_VEND_INT_STATUS2_MASK))
-+		return IRQ_NONE;
-+
-+	phy_trigger_machine(phydev);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static int aqr_read_status(struct phy_device *phydev)
-+{
-+	int val;
-+
-+	if (phydev->autoneg == AUTONEG_ENABLE) {
-+		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
-+		if (val < 0)
-+			return val;
-+
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-+				 phydev->lp_advertising,
-+				 val & MDIO_AN_RX_LP_STAT1_1000BASET_FULL);
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-+				 phydev->lp_advertising,
-+				 val & MDIO_AN_RX_LP_STAT1_1000BASET_HALF);
-+	}
-+
-+	return genphy_c45_read_status(phydev);
-+}
-+
-+static int aqr107_read_rate(struct phy_device *phydev)
-+{
-+	u32 config_reg;
-+	int val;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_STATUS1);
-+	if (val < 0)
-+		return val;
-+
-+	if (val & MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX)
-+		phydev->duplex = DUPLEX_FULL;
-+	else
-+		phydev->duplex = DUPLEX_HALF;
-+
-+	switch (FIELD_GET(MDIO_AN_TX_VEND_STATUS1_RATE_MASK, val)) {
-+	case MDIO_AN_TX_VEND_STATUS1_10BASET:
-+		phydev->speed = SPEED_10;
-+		config_reg = VEND1_GLOBAL_CFG_10M;
-+		break;
-+	case MDIO_AN_TX_VEND_STATUS1_100BASETX:
-+		phydev->speed = SPEED_100;
-+		config_reg = VEND1_GLOBAL_CFG_100M;
-+		break;
-+	case MDIO_AN_TX_VEND_STATUS1_1000BASET:
-+		phydev->speed = SPEED_1000;
-+		config_reg = VEND1_GLOBAL_CFG_1G;
-+		break;
-+	case MDIO_AN_TX_VEND_STATUS1_2500BASET:
-+		phydev->speed = SPEED_2500;
-+		config_reg = VEND1_GLOBAL_CFG_2_5G;
-+		break;
-+	case MDIO_AN_TX_VEND_STATUS1_5000BASET:
-+		phydev->speed = SPEED_5000;
-+		config_reg = VEND1_GLOBAL_CFG_5G;
-+		break;
-+	case MDIO_AN_TX_VEND_STATUS1_10GBASET:
-+		phydev->speed = SPEED_10000;
-+		config_reg = VEND1_GLOBAL_CFG_10G;
-+		break;
-+	default:
-+		phydev->speed = SPEED_UNKNOWN;
-+		return 0;
-+	}
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, config_reg);
-+	if (val < 0)
-+		return val;
-+
-+	if (FIELD_GET(VEND1_GLOBAL_CFG_RATE_ADAPT, val) ==
-+	    VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE)
-+		phydev->rate_matching = RATE_MATCH_PAUSE;
-+	else
-+		phydev->rate_matching = RATE_MATCH_NONE;
-+
-+	return 0;
-+}
-+
-+static int aqr107_read_status(struct phy_device *phydev)
-+{
-+	int val, ret;
-+
-+	ret = aqr_read_status(phydev);
-+	if (ret)
-+		return ret;
-+
-+	if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE)
-+		return 0;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_IF_STATUS);
-+	if (val < 0)
-+		return val;
-+
-+	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
-+		phydev->interface = PHY_INTERFACE_MODE_10GKR;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
-+		phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
-+		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
-+		phydev->interface = PHY_INTERFACE_MODE_USXGMII;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
-+		phydev->interface = PHY_INTERFACE_MODE_XAUI;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
-+		phydev->interface = PHY_INTERFACE_MODE_SGMII;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
-+		phydev->interface = PHY_INTERFACE_MODE_RXAUI;
-+		break;
-+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
-+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-+		break;
-+	default:
-+		phydev->interface = PHY_INTERFACE_MODE_NA;
-+		break;
-+	}
-+
-+	/* Read possibly downshifted rate from vendor register */
-+	return aqr107_read_rate(phydev);
-+}
-+
-+static int aqr107_get_downshift(struct phy_device *phydev, u8 *data)
-+{
-+	int val, cnt, enable;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV);
-+	if (val < 0)
-+		return val;
-+
-+	enable = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_EN, val);
-+	cnt = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
-+
-+	*data = enable && cnt ? cnt : DOWNSHIFT_DEV_DISABLE;
-+
-+	return 0;
-+}
-+
-+static int aqr107_set_downshift(struct phy_device *phydev, u8 cnt)
-+{
-+	int val = 0;
-+
-+	if (!FIELD_FIT(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt))
-+		return -E2BIG;
-+
-+	if (cnt != DOWNSHIFT_DEV_DISABLE) {
-+		val = MDIO_AN_VEND_PROV_DOWNSHIFT_EN;
-+		val |= FIELD_PREP(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt);
-+	}
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
-+			      MDIO_AN_VEND_PROV_DOWNSHIFT_EN |
-+			      MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
-+}
-+
-+static int aqr107_get_tunable(struct phy_device *phydev,
-+			      struct ethtool_tunable *tuna, void *data)
-+{
-+	switch (tuna->id) {
-+	case ETHTOOL_PHY_DOWNSHIFT:
-+		return aqr107_get_downshift(phydev, data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+static int aqr107_set_tunable(struct phy_device *phydev,
-+			      struct ethtool_tunable *tuna, const void *data)
-+{
-+	switch (tuna->id) {
-+	case ETHTOOL_PHY_DOWNSHIFT:
-+		return aqr107_set_downshift(phydev, *(const u8 *)data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+/* If we configure settings whilst firmware is still initializing the chip,
-+ * then these settings may be overwritten. Therefore make sure chip
-+ * initialization has completed. Use presence of the firmware ID as
-+ * indicator for initialization having completed.
-+ * The chip also provides a "reset completed" bit, but it's cleared after
-+ * read. Therefore function would time out if called again.
-+ */
-+static int aqr107_wait_reset_complete(struct phy_device *phydev)
-+{
-+	int val;
-+
-+	return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
-+					 VEND1_GLOBAL_FW_ID, val, val != 0,
-+					 20000, 2000000, false);
-+}
-+
-+static void aqr107_chip_info(struct phy_device *phydev)
-+{
-+	u8 fw_major, fw_minor, build_id, prov_id;
-+	int val;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
-+	if (val < 0)
-+		return;
-+
-+	fw_major = FIELD_GET(VEND1_GLOBAL_FW_ID_MAJOR, val);
-+	fw_minor = FIELD_GET(VEND1_GLOBAL_FW_ID_MINOR, val);
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT1);
-+	if (val < 0)
-+		return;
-+
-+	build_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID, val);
-+	prov_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_PROV_ID, val);
-+
-+	phydev_dbg(phydev, "FW %u.%u, Build %u, Provisioning %u\n",
-+		   fw_major, fw_minor, build_id, prov_id);
-+}
-+
-+static int aqr107_config_init(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* Check that the PHY interface type is compatible */
-+	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
-+	    phydev->interface != PHY_INTERFACE_MODE_1000BASEKX &&
-+	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
-+	    phydev->interface != PHY_INTERFACE_MODE_XGMII &&
-+	    phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
-+	    phydev->interface != PHY_INTERFACE_MODE_10GKR &&
-+	    phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
-+	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
-+	    phydev->interface != PHY_INTERFACE_MODE_RXAUI)
-+		return -ENODEV;
-+
-+	WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,
-+	     "Your devicetree is out of date, please update it. The AQR107 family doesn't support XGMII, maybe you mean USXGMII.\n");
-+
-+	ret = aqr107_wait_reset_complete(phydev);
-+	if (!ret)
-+		aqr107_chip_info(phydev);
-+
-+	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
-+}
-+
-+static int aqcs109_config_init(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* Check that the PHY interface type is compatible */
-+	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
-+	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX)
-+		return -ENODEV;
-+
-+	ret = aqr107_wait_reset_complete(phydev);
-+	if (!ret)
-+		aqr107_chip_info(phydev);
-+
-+	/* AQCS109 belongs to a chip family partially supporting 10G and 5G.
-+	 * PMA speed ability bits are the same for all members of the family,
-+	 * AQCS109 however supports speeds up to 2.5G only.
-+	 */
-+	phy_set_max_speed(phydev, SPEED_2500);
-+
-+	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
-+}
-+
-+static void aqr107_link_change_notify(struct phy_device *phydev)
-+{
-+	u8 fw_major, fw_minor;
-+	bool downshift, short_reach, afr;
-+	int mode, val;
-+
-+	if (phydev->state != PHY_RUNNING || phydev->autoneg == AUTONEG_DISABLE)
-+		return;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
-+	/* call failed or link partner is no Aquantia PHY */
-+	if (val < 0 || !(val & MDIO_AN_RX_LP_STAT1_AQ_PHY))
-+		return;
-+
-+	short_reach = val & MDIO_AN_RX_LP_STAT1_SHORT_REACH;
-+	downshift = val & MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT4);
-+	if (val < 0)
-+		return;
-+
-+	fw_major = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MAJOR, val);
-+	fw_minor = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MINOR, val);
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_VEND_STAT3);
-+	if (val < 0)
-+		return;
-+
-+	afr = val & MDIO_AN_RX_VEND_STAT3_AFR;
-+
-+	phydev_dbg(phydev, "Link partner is Aquantia PHY, FW %u.%u%s%s%s\n",
-+		   fw_major, fw_minor,
-+		   short_reach ? ", short reach mode" : "",
-+		   downshift ? ", fast-retrain downshift advertised" : "",
-+		   afr ? ", fast reframe advertised" : "");
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT9);
-+	if (val < 0)
-+		return;
-+
-+	mode = FIELD_GET(VEND1_GLOBAL_RSVD_STAT9_MODE, val);
-+	if (mode == VEND1_GLOBAL_RSVD_STAT9_1000BT2)
-+		phydev_info(phydev, "Aquantia 1000Base-T2 mode active\n");
-+}
-+
-+static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
-+{
-+	int val, err;
-+
-+	/* The datasheet notes to wait at least 1ms after issuing a
-+	 * processor intensive operation before checking.
-+	 * We cannot use the 'sleep_before_read' parameter of read_poll_timeout
-+	 * because that just determines the maximum time slept, not the minimum.
-+	 */
-+	usleep_range(1000, 5000);
-+
-+	err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
-+					VEND1_GLOBAL_GEN_STAT2, val,
-+					!(val & VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG),
-+					AQR107_OP_IN_PROG_SLEEP,
-+					AQR107_OP_IN_PROG_TIMEOUT, false);
-+	if (err) {
-+		phydev_err(phydev, "timeout: processor-intensive MDIO operation\n");
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
-+static int aqr107_get_rate_matching(struct phy_device *phydev,
-+				    phy_interface_t iface)
-+{
-+	if (iface == PHY_INTERFACE_MODE_10GBASER ||
-+	    iface == PHY_INTERFACE_MODE_2500BASEX ||
-+	    iface == PHY_INTERFACE_MODE_NA)
-+		return RATE_MATCH_PAUSE;
-+	return RATE_MATCH_NONE;
-+}
-+
-+static int aqr107_suspend(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	err = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1,
-+			       MDIO_CTRL1_LPOWER);
-+	if (err)
-+		return err;
-+
-+	return aqr107_wait_processor_intensive_op(phydev);
-+}
-+
-+static int aqr107_resume(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	err = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1,
-+				 MDIO_CTRL1_LPOWER);
-+	if (err)
-+		return err;
-+
-+	return aqr107_wait_processor_intensive_op(phydev);
-+}
-+
-+static int aqr107_probe(struct phy_device *phydev)
-+{
-+	phydev->priv = devm_kzalloc(&phydev->mdio.dev,
-+				    sizeof(struct aqr107_priv), GFP_KERNEL);
-+	if (!phydev->priv)
-+		return -ENOMEM;
-+
-+	return aqr_hwmon_probe(phydev);
-+}
-+
-+static struct phy_driver aqr_driver[] = {
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
-+	.name		= "Aquantia AQ1202",
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr_read_status,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
-+	.name		= "Aquantia AQ2104",
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr_read_status,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
-+	.name		= "Aquantia AQR105",
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr_read_status,
-+	.suspend	= aqr107_suspend,
-+	.resume		= aqr107_resume,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
-+	.name		= "Aquantia AQR106",
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr_read_status,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
-+	.name		= "Aquantia AQR107",
-+	.probe		= aqr107_probe,
-+	.get_rate_matching = aqr107_get_rate_matching,
-+	.config_init	= aqr107_config_init,
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_tunable    = aqr107_get_tunable,
-+	.set_tunable    = aqr107_set_tunable,
-+	.suspend	= aqr107_suspend,
-+	.resume		= aqr107_resume,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+	.link_change_notify = aqr107_link_change_notify,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
-+	.name		= "Aquantia AQCS109",
-+	.probe		= aqr107_probe,
-+	.get_rate_matching = aqr107_get_rate_matching,
-+	.config_init	= aqcs109_config_init,
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_tunable    = aqr107_get_tunable,
-+	.set_tunable    = aqr107_set_tunable,
-+	.suspend	= aqr107_suspend,
-+	.resume		= aqr107_resume,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+	.link_change_notify = aqr107_link_change_notify,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
-+	.name		= "Aquantia AQR405",
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr_read_status,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
-+	.name           = "Aquantia AQR113C",
-+	.probe          = aqr107_probe,
-+	.get_rate_matching = aqr107_get_rate_matching,
-+	.config_init    = aqr107_config_init,
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr    = aqr_config_intr,
-+	.handle_interrupt       = aqr_handle_interrupt,
-+	.read_status    = aqr107_read_status,
-+	.get_tunable    = aqr107_get_tunable,
-+	.set_tunable    = aqr107_set_tunable,
-+	.suspend        = aqr107_suspend,
-+	.resume         = aqr107_resume,
-+	.get_sset_count = aqr107_get_sset_count,
-+	.get_strings    = aqr107_get_strings,
-+	.get_stats      = aqr107_get_stats,
-+	.link_change_notify = aqr107_link_change_notify,
-+},
-+};
-+
-+module_phy_driver(aqr_driver);
-+
-+static struct mdio_device_id __maybe_unused aqr_tbl[] = {
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ1202) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ2104) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(mdio, aqr_tbl);
-+
-+MODULE_DESCRIPTION("Aquantia PHY driver");
-+MODULE_AUTHOR("Shaohui Xie <Shaohui.Xie@freescale.com>");
-+MODULE_LICENSE("GPL v2");
---- a/drivers/net/phy/aquantia_hwmon.c
-+++ /dev/null
-@@ -1,250 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0
--/* HWMON driver for Aquantia PHY
-- *
-- * Author: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
-- * Author: Andrew Lunn <andrew@lunn.ch>
-- * Author: Heiner Kallweit <hkallweit1@gmail.com>
-- */
--
--#include <linux/phy.h>
--#include <linux/device.h>
--#include <linux/ctype.h>
--#include <linux/hwmon.h>
--
--#include "aquantia.h"
--
--/* Vendor specific 1, MDIO_MMD_VEND2 */
--#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
--#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
--#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
--#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
--#define VEND1_THERMAL_STAT1			0xc820
--#define VEND1_THERMAL_STAT2			0xc821
--#define VEND1_THERMAL_STAT2_VALID		BIT(0)
--#define VEND1_GENERAL_STAT1			0xc830
--#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
--#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
--#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
--#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
--
--#if IS_REACHABLE(CONFIG_HWMON)
--
--static umode_t aqr_hwmon_is_visible(const void *data,
--				    enum hwmon_sensor_types type,
--				    u32 attr, int channel)
--{
--	if (type != hwmon_temp)
--		return 0;
--
--	switch (attr) {
--	case hwmon_temp_input:
--	case hwmon_temp_min_alarm:
--	case hwmon_temp_max_alarm:
--	case hwmon_temp_lcrit_alarm:
--	case hwmon_temp_crit_alarm:
--		return 0444;
--	case hwmon_temp_min:
--	case hwmon_temp_max:
--	case hwmon_temp_lcrit:
--	case hwmon_temp_crit:
--		return 0644;
--	default:
--		return 0;
--	}
--}
--
--static int aqr_hwmon_get(struct phy_device *phydev, int reg, long *value)
--{
--	int temp = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
--
--	if (temp < 0)
--		return temp;
--
--	/* 16 bit value is 2's complement with LSB = 1/256th degree Celsius */
--	*value = (s16)temp * 1000 / 256;
--
--	return 0;
--}
--
--static int aqr_hwmon_set(struct phy_device *phydev, int reg, long value)
--{
--	int temp;
--
--	if (value >= 128000 || value < -128000)
--		return -ERANGE;
--
--	temp = value * 256 / 1000;
--
--	/* temp is in s16 range and we're interested in lower 16 bits only */
--	return phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, (u16)temp);
--}
--
--static int aqr_hwmon_test_bit(struct phy_device *phydev, int reg, int bit)
--{
--	int val = phy_read_mmd(phydev, MDIO_MMD_VEND1, reg);
--
--	if (val < 0)
--		return val;
--
--	return !!(val & bit);
--}
--
--static int aqr_hwmon_status1(struct phy_device *phydev, int bit, long *value)
--{
--	int val = aqr_hwmon_test_bit(phydev, VEND1_GENERAL_STAT1, bit);
--
--	if (val < 0)
--		return val;
--
--	*value = val;
--
--	return 0;
--}
--
--static int aqr_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
--			  u32 attr, int channel, long *value)
--{
--	struct phy_device *phydev = dev_get_drvdata(dev);
--	int reg;
--
--	if (type != hwmon_temp)
--		return -EOPNOTSUPP;
--
--	switch (attr) {
--	case hwmon_temp_input:
--		reg = aqr_hwmon_test_bit(phydev, VEND1_THERMAL_STAT2,
--					 VEND1_THERMAL_STAT2_VALID);
--		if (reg < 0)
--			return reg;
--		if (!reg)
--			return -EBUSY;
--
--		return aqr_hwmon_get(phydev, VEND1_THERMAL_STAT1, value);
--
--	case hwmon_temp_lcrit:
--		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
--				     value);
--	case hwmon_temp_min:
--		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
--				     value);
--	case hwmon_temp_max:
--		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
--				     value);
--	case hwmon_temp_crit:
--		return aqr_hwmon_get(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
--				     value);
--	case hwmon_temp_lcrit_alarm:
--		return aqr_hwmon_status1(phydev,
--					 VEND1_GENERAL_STAT1_LOW_TEMP_FAIL,
--					 value);
--	case hwmon_temp_min_alarm:
--		return aqr_hwmon_status1(phydev,
--					 VEND1_GENERAL_STAT1_LOW_TEMP_WARN,
--					 value);
--	case hwmon_temp_max_alarm:
--		return aqr_hwmon_status1(phydev,
--					 VEND1_GENERAL_STAT1_HIGH_TEMP_WARN,
--					 value);
--	case hwmon_temp_crit_alarm:
--		return aqr_hwmon_status1(phydev,
--					 VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL,
--					 value);
--	default:
--		return -EOPNOTSUPP;
--	}
--}
--
--static int aqr_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
--			   u32 attr, int channel, long value)
--{
--	struct phy_device *phydev = dev_get_drvdata(dev);
--
--	if (type != hwmon_temp)
--		return -EOPNOTSUPP;
--
--	switch (attr) {
--	case hwmon_temp_lcrit:
--		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_FAIL,
--				     value);
--	case hwmon_temp_min:
--		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_LOW_TEMP_WARN,
--				     value);
--	case hwmon_temp_max:
--		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_WARN,
--				     value);
--	case hwmon_temp_crit:
--		return aqr_hwmon_set(phydev, VEND1_THERMAL_PROV_HIGH_TEMP_FAIL,
--				     value);
--	default:
--		return -EOPNOTSUPP;
--	}
--}
--
--static const struct hwmon_ops aqr_hwmon_ops = {
--	.is_visible = aqr_hwmon_is_visible,
--	.read = aqr_hwmon_read,
--	.write = aqr_hwmon_write,
--};
--
--static u32 aqr_hwmon_chip_config[] = {
--	HWMON_C_REGISTER_TZ,
--	0,
--};
--
--static const struct hwmon_channel_info aqr_hwmon_chip = {
--	.type = hwmon_chip,
--	.config = aqr_hwmon_chip_config,
--};
--
--static u32 aqr_hwmon_temp_config[] = {
--	HWMON_T_INPUT |
--	HWMON_T_MAX | HWMON_T_MIN |
--	HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM |
--	HWMON_T_CRIT | HWMON_T_LCRIT |
--	HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM,
--	0,
--};
--
--static const struct hwmon_channel_info aqr_hwmon_temp = {
--	.type = hwmon_temp,
--	.config = aqr_hwmon_temp_config,
--};
--
--static const struct hwmon_channel_info *aqr_hwmon_info[] = {
--	&aqr_hwmon_chip,
--	&aqr_hwmon_temp,
--	NULL,
--};
--
--static const struct hwmon_chip_info aqr_hwmon_chip_info = {
--	.ops = &aqr_hwmon_ops,
--	.info = aqr_hwmon_info,
--};
--
--int aqr_hwmon_probe(struct phy_device *phydev)
--{
--	struct device *dev = &phydev->mdio.dev;
--	struct device *hwmon_dev;
--	char *hwmon_name;
--	int i, j;
--
--	hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
--	if (!hwmon_name)
--		return -ENOMEM;
--
--	for (i = j = 0; hwmon_name[i]; i++) {
--		if (isalnum(hwmon_name[i])) {
--			if (i != j)
--				hwmon_name[j] = hwmon_name[i];
--			j++;
--		}
--	}
--	hwmon_name[j] = '\0';
--
--	hwmon_dev = devm_hwmon_device_register_with_info(dev, hwmon_name,
--					phydev, &aqr_hwmon_chip_info, NULL);
--
--	return PTR_ERR_OR_ZERO(hwmon_dev);
--}
--
--#endif
---- a/drivers/net/phy/aquantia_main.c
-+++ /dev/null
-@@ -1,842 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0
--/*
-- * Driver for Aquantia PHY
-- *
-- * Author: Shaohui Xie <Shaohui.Xie@freescale.com>
-- *
-- * Copyright 2015 Freescale Semiconductor, Inc.
-- */
--
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/delay.h>
--#include <linux/bitfield.h>
--#include <linux/phy.h>
--
--#include "aquantia.h"
--
--#define PHY_ID_AQ1202	0x03a1b445
--#define PHY_ID_AQ2104	0x03a1b460
--#define PHY_ID_AQR105	0x03a1b4a2
--#define PHY_ID_AQR106	0x03a1b4d0
--#define PHY_ID_AQR107	0x03a1b4e0
--#define PHY_ID_AQCS109	0x03a1b5c2
--#define PHY_ID_AQR405	0x03a1b4b0
--#define PHY_ID_AQR113C	0x31c31c12
--
--#define MDIO_PHYXS_VEND_IF_STATUS		0xe812
--#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
--#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR	0
--#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX	1
--#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI	2
--#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII	3
--#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI	4
--#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII	6
--#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI	7
--#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII	10
--
--#define MDIO_AN_VEND_PROV			0xc400
--#define MDIO_AN_VEND_PROV_1000BASET_FULL	BIT(15)
--#define MDIO_AN_VEND_PROV_1000BASET_HALF	BIT(14)
--#define MDIO_AN_VEND_PROV_5000BASET_FULL	BIT(11)
--#define MDIO_AN_VEND_PROV_2500BASET_FULL	BIT(10)
--#define MDIO_AN_VEND_PROV_DOWNSHIFT_EN		BIT(4)
--#define MDIO_AN_VEND_PROV_DOWNSHIFT_MASK	GENMASK(3, 0)
--#define MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT	4
--
--#define MDIO_AN_TX_VEND_STATUS1			0xc800
--#define MDIO_AN_TX_VEND_STATUS1_RATE_MASK	GENMASK(3, 1)
--#define MDIO_AN_TX_VEND_STATUS1_10BASET		0
--#define MDIO_AN_TX_VEND_STATUS1_100BASETX	1
--#define MDIO_AN_TX_VEND_STATUS1_1000BASET	2
--#define MDIO_AN_TX_VEND_STATUS1_10GBASET	3
--#define MDIO_AN_TX_VEND_STATUS1_2500BASET	4
--#define MDIO_AN_TX_VEND_STATUS1_5000BASET	5
--#define MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX	BIT(0)
--
--#define MDIO_AN_TX_VEND_INT_STATUS1		0xcc00
--#define MDIO_AN_TX_VEND_INT_STATUS1_DOWNSHIFT	BIT(1)
--
--#define MDIO_AN_TX_VEND_INT_STATUS2		0xcc01
--#define MDIO_AN_TX_VEND_INT_STATUS2_MASK	BIT(0)
--
--#define MDIO_AN_TX_VEND_INT_MASK2		0xd401
--#define MDIO_AN_TX_VEND_INT_MASK2_LINK		BIT(0)
--
--#define MDIO_AN_RX_LP_STAT1			0xe820
--#define MDIO_AN_RX_LP_STAT1_1000BASET_FULL	BIT(15)
--#define MDIO_AN_RX_LP_STAT1_1000BASET_HALF	BIT(14)
--#define MDIO_AN_RX_LP_STAT1_SHORT_REACH		BIT(13)
--#define MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT	BIT(12)
--#define MDIO_AN_RX_LP_STAT1_AQ_PHY		BIT(2)
--
--#define MDIO_AN_RX_LP_STAT4			0xe823
--#define MDIO_AN_RX_LP_STAT4_FW_MAJOR		GENMASK(15, 8)
--#define MDIO_AN_RX_LP_STAT4_FW_MINOR		GENMASK(7, 0)
--
--#define MDIO_AN_RX_VEND_STAT3			0xe832
--#define MDIO_AN_RX_VEND_STAT3_AFR		BIT(0)
--
--/* MDIO_MMD_C22EXT */
--#define MDIO_C22EXT_STAT_SGMII_RX_GOOD_FRAMES		0xd292
--#define MDIO_C22EXT_STAT_SGMII_RX_BAD_FRAMES		0xd294
--#define MDIO_C22EXT_STAT_SGMII_RX_FALSE_CARRIER		0xd297
--#define MDIO_C22EXT_STAT_SGMII_TX_GOOD_FRAMES		0xd313
--#define MDIO_C22EXT_STAT_SGMII_TX_BAD_FRAMES		0xd315
--#define MDIO_C22EXT_STAT_SGMII_TX_FALSE_CARRIER		0xd317
--#define MDIO_C22EXT_STAT_SGMII_TX_COLLISIONS		0xd318
--#define MDIO_C22EXT_STAT_SGMII_TX_LINE_COLLISIONS	0xd319
--#define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR	0xd31a
--#define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES		0xd31b
--
--/* Vendor specific 1, MDIO_MMD_VEND1 */
--#define VEND1_GLOBAL_FW_ID			0x0020
--#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
--#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
--
--#define VEND1_GLOBAL_GEN_STAT2			0xc831
--#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
--
--/* The following registers all have similar layouts; first the registers... */
--#define VEND1_GLOBAL_CFG_10M			0x0310
--#define VEND1_GLOBAL_CFG_100M			0x031b
--#define VEND1_GLOBAL_CFG_1G			0x031c
--#define VEND1_GLOBAL_CFG_2_5G			0x031d
--#define VEND1_GLOBAL_CFG_5G			0x031e
--#define VEND1_GLOBAL_CFG_10G			0x031f
--/* ...and now the fields */
--#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
--#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
--#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
--#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
--
--#define VEND1_GLOBAL_RSVD_STAT1			0xc885
--#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
--#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
--
--#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
--#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
--#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
--
--#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
--#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
--
--#define VEND1_GLOBAL_INT_STD_MASK		0xff00
--#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
--#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
--#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
--#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
--#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
--#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
--#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
--#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
--#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
--#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
--#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
--
--#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
--#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
--#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
--#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
--#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
--#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
--#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
--#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
--#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
--
--/* Sleep and timeout for checking if the Processor-Intensive
-- * MDIO operation is finished
-- */
--#define AQR107_OP_IN_PROG_SLEEP		1000
--#define AQR107_OP_IN_PROG_TIMEOUT	100000
--
--struct aqr107_hw_stat {
--	const char *name;
--	int reg;
--	int size;
--};
--
--#define SGMII_STAT(n, r, s) { n, MDIO_C22EXT_STAT_SGMII_ ## r, s }
--static const struct aqr107_hw_stat aqr107_hw_stats[] = {
--	SGMII_STAT("sgmii_rx_good_frames",	    RX_GOOD_FRAMES,	26),
--	SGMII_STAT("sgmii_rx_bad_frames",	    RX_BAD_FRAMES,	26),
--	SGMII_STAT("sgmii_rx_false_carrier_events", RX_FALSE_CARRIER,	 8),
--	SGMII_STAT("sgmii_tx_good_frames",	    TX_GOOD_FRAMES,	26),
--	SGMII_STAT("sgmii_tx_bad_frames",	    TX_BAD_FRAMES,	26),
--	SGMII_STAT("sgmii_tx_false_carrier_events", TX_FALSE_CARRIER,	 8),
--	SGMII_STAT("sgmii_tx_collisions",	    TX_COLLISIONS,	 8),
--	SGMII_STAT("sgmii_tx_line_collisions",	    TX_LINE_COLLISIONS,	 8),
--	SGMII_STAT("sgmii_tx_frame_alignment_err",  TX_FRAME_ALIGN_ERR,	16),
--	SGMII_STAT("sgmii_tx_runt_frames",	    TX_RUNT_FRAMES,	22),
--};
--#define AQR107_SGMII_STAT_SZ ARRAY_SIZE(aqr107_hw_stats)
--
--struct aqr107_priv {
--	u64 sgmii_stats[AQR107_SGMII_STAT_SZ];
--};
--
--static int aqr107_get_sset_count(struct phy_device *phydev)
--{
--	return AQR107_SGMII_STAT_SZ;
--}
--
--static void aqr107_get_strings(struct phy_device *phydev, u8 *data)
--{
--	int i;
--
--	for (i = 0; i < AQR107_SGMII_STAT_SZ; i++)
--		strscpy(data + i * ETH_GSTRING_LEN, aqr107_hw_stats[i].name,
--			ETH_GSTRING_LEN);
--}
--
--static u64 aqr107_get_stat(struct phy_device *phydev, int index)
--{
--	const struct aqr107_hw_stat *stat = aqr107_hw_stats + index;
--	int len_l = min(stat->size, 16);
--	int len_h = stat->size - len_l;
--	u64 ret;
--	int val;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg);
--	if (val < 0)
--		return U64_MAX;
--
--	ret = val & GENMASK(len_l - 1, 0);
--	if (len_h) {
--		val = phy_read_mmd(phydev, MDIO_MMD_C22EXT, stat->reg + 1);
--		if (val < 0)
--			return U64_MAX;
--
--		ret += (val & GENMASK(len_h - 1, 0)) << 16;
--	}
--
--	return ret;
--}
--
--static void aqr107_get_stats(struct phy_device *phydev,
--			     struct ethtool_stats *stats, u64 *data)
--{
--	struct aqr107_priv *priv = phydev->priv;
--	u64 val;
--	int i;
--
--	for (i = 0; i < AQR107_SGMII_STAT_SZ; i++) {
--		val = aqr107_get_stat(phydev, i);
--		if (val == U64_MAX)
--			phydev_err(phydev, "Reading HW Statistics failed for %s\n",
--				   aqr107_hw_stats[i].name);
--		else
--			priv->sgmii_stats[i] += val;
--
--		data[i] = priv->sgmii_stats[i];
--	}
--}
--
--static int aqr_config_aneg(struct phy_device *phydev)
--{
--	bool changed = false;
--	u16 reg;
--	int ret;
--
--	if (phydev->autoneg == AUTONEG_DISABLE)
--		return genphy_c45_pma_setup_forced(phydev);
--
--	ret = genphy_c45_an_config_aneg(phydev);
--	if (ret < 0)
--		return ret;
--	if (ret > 0)
--		changed = true;
--
--	/* Clause 45 has no standardized support for 1000BaseT, therefore
--	 * use vendor registers for this mode.
--	 */
--	reg = 0;
--	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
--			      phydev->advertising))
--		reg |= MDIO_AN_VEND_PROV_1000BASET_FULL;
--
--	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
--			      phydev->advertising))
--		reg |= MDIO_AN_VEND_PROV_1000BASET_HALF;
--
--	/* Handle the case when the 2.5G and 5G speeds are not advertised */
--	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
--			      phydev->advertising))
--		reg |= MDIO_AN_VEND_PROV_2500BASET_FULL;
--
--	if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
--			      phydev->advertising))
--		reg |= MDIO_AN_VEND_PROV_5000BASET_FULL;
--
--	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
--				     MDIO_AN_VEND_PROV_1000BASET_HALF |
--				     MDIO_AN_VEND_PROV_1000BASET_FULL |
--				     MDIO_AN_VEND_PROV_2500BASET_FULL |
--				     MDIO_AN_VEND_PROV_5000BASET_FULL, reg);
--	if (ret < 0)
--		return ret;
--	if (ret > 0)
--		changed = true;
--
--	return genphy_c45_check_and_restart_aneg(phydev, changed);
--}
--
--static int aqr_config_intr(struct phy_device *phydev)
--{
--	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
--	int err;
--
--	if (en) {
--		/* Clear any pending interrupts before enabling them */
--		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
--		if (err < 0)
--			return err;
--	}
--
--	err = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_MASK2,
--			    en ? MDIO_AN_TX_VEND_INT_MASK2_LINK : 0);
--	if (err < 0)
--		return err;
--
--	err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_STD_MASK,
--			    en ? VEND1_GLOBAL_INT_STD_MASK_ALL : 0);
--	if (err < 0)
--		return err;
--
--	err = phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_INT_VEND_MASK,
--			    en ? VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 |
--			    VEND1_GLOBAL_INT_VEND_MASK_AN : 0);
--	if (err < 0)
--		return err;
--
--	if (!en) {
--		/* Clear any pending interrupts after we have disabled them */
--		err = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_INT_STATUS2);
--		if (err < 0)
--			return err;
--	}
--
--	return 0;
--}
--
--static irqreturn_t aqr_handle_interrupt(struct phy_device *phydev)
--{
--	int irq_status;
--
--	irq_status = phy_read_mmd(phydev, MDIO_MMD_AN,
--				  MDIO_AN_TX_VEND_INT_STATUS2);
--	if (irq_status < 0) {
--		phy_error(phydev);
--		return IRQ_NONE;
--	}
--
--	if (!(irq_status & MDIO_AN_TX_VEND_INT_STATUS2_MASK))
--		return IRQ_NONE;
--
--	phy_trigger_machine(phydev);
--
--	return IRQ_HANDLED;
--}
--
--static int aqr_read_status(struct phy_device *phydev)
--{
--	int val;
--
--	if (phydev->autoneg == AUTONEG_ENABLE) {
--		val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
--		if (val < 0)
--			return val;
--
--		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
--				 phydev->lp_advertising,
--				 val & MDIO_AN_RX_LP_STAT1_1000BASET_FULL);
--		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
--				 phydev->lp_advertising,
--				 val & MDIO_AN_RX_LP_STAT1_1000BASET_HALF);
--	}
--
--	return genphy_c45_read_status(phydev);
--}
--
--static int aqr107_read_rate(struct phy_device *phydev)
--{
--	u32 config_reg;
--	int val;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_TX_VEND_STATUS1);
--	if (val < 0)
--		return val;
--
--	if (val & MDIO_AN_TX_VEND_STATUS1_FULL_DUPLEX)
--		phydev->duplex = DUPLEX_FULL;
--	else
--		phydev->duplex = DUPLEX_HALF;
--
--	switch (FIELD_GET(MDIO_AN_TX_VEND_STATUS1_RATE_MASK, val)) {
--	case MDIO_AN_TX_VEND_STATUS1_10BASET:
--		phydev->speed = SPEED_10;
--		config_reg = VEND1_GLOBAL_CFG_10M;
--		break;
--	case MDIO_AN_TX_VEND_STATUS1_100BASETX:
--		phydev->speed = SPEED_100;
--		config_reg = VEND1_GLOBAL_CFG_100M;
--		break;
--	case MDIO_AN_TX_VEND_STATUS1_1000BASET:
--		phydev->speed = SPEED_1000;
--		config_reg = VEND1_GLOBAL_CFG_1G;
--		break;
--	case MDIO_AN_TX_VEND_STATUS1_2500BASET:
--		phydev->speed = SPEED_2500;
--		config_reg = VEND1_GLOBAL_CFG_2_5G;
--		break;
--	case MDIO_AN_TX_VEND_STATUS1_5000BASET:
--		phydev->speed = SPEED_5000;
--		config_reg = VEND1_GLOBAL_CFG_5G;
--		break;
--	case MDIO_AN_TX_VEND_STATUS1_10GBASET:
--		phydev->speed = SPEED_10000;
--		config_reg = VEND1_GLOBAL_CFG_10G;
--		break;
--	default:
--		phydev->speed = SPEED_UNKNOWN;
--		return 0;
--	}
--
--	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, config_reg);
--	if (val < 0)
--		return val;
--
--	if (FIELD_GET(VEND1_GLOBAL_CFG_RATE_ADAPT, val) ==
--	    VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE)
--		phydev->rate_matching = RATE_MATCH_PAUSE;
--	else
--		phydev->rate_matching = RATE_MATCH_NONE;
--
--	return 0;
--}
--
--static int aqr107_read_status(struct phy_device *phydev)
--{
--	int val, ret;
--
--	ret = aqr_read_status(phydev);
--	if (ret)
--		return ret;
--
--	if (!phydev->link || phydev->autoneg == AUTONEG_DISABLE)
--		return 0;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_IF_STATUS);
--	if (val < 0)
--		return val;
--
--	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
--	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
--		phydev->interface = PHY_INTERFACE_MODE_10GKR;
--		break;
--	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
--		phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
--		break;
--	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
--		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
--		break;
--	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
--		phydev->interface = PHY_INTERFACE_MODE_USXGMII;
--		break;
--	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
--		phydev->interface = PHY_INTERFACE_MODE_XAUI;
--		break;
--	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
--		phydev->interface = PHY_INTERFACE_MODE_SGMII;
--		break;
--	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
--		phydev->interface = PHY_INTERFACE_MODE_RXAUI;
--		break;
--	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
--		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
--		break;
--	default:
--		phydev->interface = PHY_INTERFACE_MODE_NA;
--		break;
--	}
--
--	/* Read possibly downshifted rate from vendor register */
--	return aqr107_read_rate(phydev);
--}
--
--static int aqr107_get_downshift(struct phy_device *phydev, u8 *data)
--{
--	int val, cnt, enable;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV);
--	if (val < 0)
--		return val;
--
--	enable = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_EN, val);
--	cnt = FIELD_GET(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
--
--	*data = enable && cnt ? cnt : DOWNSHIFT_DEV_DISABLE;
--
--	return 0;
--}
--
--static int aqr107_set_downshift(struct phy_device *phydev, u8 cnt)
--{
--	int val = 0;
--
--	if (!FIELD_FIT(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt))
--		return -E2BIG;
--
--	if (cnt != DOWNSHIFT_DEV_DISABLE) {
--		val = MDIO_AN_VEND_PROV_DOWNSHIFT_EN;
--		val |= FIELD_PREP(MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, cnt);
--	}
--
--	return phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_VEND_PROV,
--			      MDIO_AN_VEND_PROV_DOWNSHIFT_EN |
--			      MDIO_AN_VEND_PROV_DOWNSHIFT_MASK, val);
--}
--
--static int aqr107_get_tunable(struct phy_device *phydev,
--			      struct ethtool_tunable *tuna, void *data)
--{
--	switch (tuna->id) {
--	case ETHTOOL_PHY_DOWNSHIFT:
--		return aqr107_get_downshift(phydev, data);
--	default:
--		return -EOPNOTSUPP;
--	}
--}
--
--static int aqr107_set_tunable(struct phy_device *phydev,
--			      struct ethtool_tunable *tuna, const void *data)
--{
--	switch (tuna->id) {
--	case ETHTOOL_PHY_DOWNSHIFT:
--		return aqr107_set_downshift(phydev, *(const u8 *)data);
--	default:
--		return -EOPNOTSUPP;
--	}
--}
--
--/* If we configure settings whilst firmware is still initializing the chip,
-- * then these settings may be overwritten. Therefore make sure chip
-- * initialization has completed. Use presence of the firmware ID as
-- * indicator for initialization having completed.
-- * The chip also provides a "reset completed" bit, but it's cleared after
-- * read. Therefore function would time out if called again.
-- */
--static int aqr107_wait_reset_complete(struct phy_device *phydev)
--{
--	int val;
--
--	return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
--					 VEND1_GLOBAL_FW_ID, val, val != 0,
--					 20000, 2000000, false);
--}
--
--static void aqr107_chip_info(struct phy_device *phydev)
--{
--	u8 fw_major, fw_minor, build_id, prov_id;
--	int val;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
--	if (val < 0)
--		return;
--
--	fw_major = FIELD_GET(VEND1_GLOBAL_FW_ID_MAJOR, val);
--	fw_minor = FIELD_GET(VEND1_GLOBAL_FW_ID_MINOR, val);
--
--	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT1);
--	if (val < 0)
--		return;
--
--	build_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID, val);
--	prov_id = FIELD_GET(VEND1_GLOBAL_RSVD_STAT1_PROV_ID, val);
--
--	phydev_dbg(phydev, "FW %u.%u, Build %u, Provisioning %u\n",
--		   fw_major, fw_minor, build_id, prov_id);
--}
--
--static int aqr107_config_init(struct phy_device *phydev)
--{
--	int ret;
--
--	/* Check that the PHY interface type is compatible */
--	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
--	    phydev->interface != PHY_INTERFACE_MODE_1000BASEKX &&
--	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
--	    phydev->interface != PHY_INTERFACE_MODE_XGMII &&
--	    phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
--	    phydev->interface != PHY_INTERFACE_MODE_10GKR &&
--	    phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
--	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
--	    phydev->interface != PHY_INTERFACE_MODE_RXAUI)
--		return -ENODEV;
--
--	WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,
--	     "Your devicetree is out of date, please update it. The AQR107 family doesn't support XGMII, maybe you mean USXGMII.\n");
--
--	ret = aqr107_wait_reset_complete(phydev);
--	if (!ret)
--		aqr107_chip_info(phydev);
--
--	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
--}
--
--static int aqcs109_config_init(struct phy_device *phydev)
--{
--	int ret;
--
--	/* Check that the PHY interface type is compatible */
--	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
--	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX)
--		return -ENODEV;
--
--	ret = aqr107_wait_reset_complete(phydev);
--	if (!ret)
--		aqr107_chip_info(phydev);
--
--	/* AQCS109 belongs to a chip family partially supporting 10G and 5G.
--	 * PMA speed ability bits are the same for all members of the family,
--	 * AQCS109 however supports speeds up to 2.5G only.
--	 */
--	phy_set_max_speed(phydev, SPEED_2500);
--
--	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
--}
--
--static void aqr107_link_change_notify(struct phy_device *phydev)
--{
--	u8 fw_major, fw_minor;
--	bool downshift, short_reach, afr;
--	int mode, val;
--
--	if (phydev->state != PHY_RUNNING || phydev->autoneg == AUTONEG_DISABLE)
--		return;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT1);
--	/* call failed or link partner is no Aquantia PHY */
--	if (val < 0 || !(val & MDIO_AN_RX_LP_STAT1_AQ_PHY))
--		return;
--
--	short_reach = val & MDIO_AN_RX_LP_STAT1_SHORT_REACH;
--	downshift = val & MDIO_AN_RX_LP_STAT1_AQRATE_DOWNSHIFT;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_LP_STAT4);
--	if (val < 0)
--		return;
--
--	fw_major = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MAJOR, val);
--	fw_minor = FIELD_GET(MDIO_AN_RX_LP_STAT4_FW_MINOR, val);
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_RX_VEND_STAT3);
--	if (val < 0)
--		return;
--
--	afr = val & MDIO_AN_RX_VEND_STAT3_AFR;
--
--	phydev_dbg(phydev, "Link partner is Aquantia PHY, FW %u.%u%s%s%s\n",
--		   fw_major, fw_minor,
--		   short_reach ? ", short reach mode" : "",
--		   downshift ? ", fast-retrain downshift advertised" : "",
--		   afr ? ", fast reframe advertised" : "");
--
--	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_RSVD_STAT9);
--	if (val < 0)
--		return;
--
--	mode = FIELD_GET(VEND1_GLOBAL_RSVD_STAT9_MODE, val);
--	if (mode == VEND1_GLOBAL_RSVD_STAT9_1000BT2)
--		phydev_info(phydev, "Aquantia 1000Base-T2 mode active\n");
--}
--
--static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
--{
--	int val, err;
--
--	/* The datasheet notes to wait at least 1ms after issuing a
--	 * processor intensive operation before checking.
--	 * We cannot use the 'sleep_before_read' parameter of read_poll_timeout
--	 * because that just determines the maximum time slept, not the minimum.
--	 */
--	usleep_range(1000, 5000);
--
--	err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
--					VEND1_GLOBAL_GEN_STAT2, val,
--					!(val & VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG),
--					AQR107_OP_IN_PROG_SLEEP,
--					AQR107_OP_IN_PROG_TIMEOUT, false);
--	if (err) {
--		phydev_err(phydev, "timeout: processor-intensive MDIO operation\n");
--		return err;
--	}
--
--	return 0;
--}
--
--static int aqr107_get_rate_matching(struct phy_device *phydev,
--				    phy_interface_t iface)
--{
--	if (iface == PHY_INTERFACE_MODE_10GBASER ||
--	    iface == PHY_INTERFACE_MODE_2500BASEX ||
--	    iface == PHY_INTERFACE_MODE_NA)
--		return RATE_MATCH_PAUSE;
--	return RATE_MATCH_NONE;
--}
--
--static int aqr107_suspend(struct phy_device *phydev)
--{
--	int err;
--
--	err = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1,
--			       MDIO_CTRL1_LPOWER);
--	if (err)
--		return err;
--
--	return aqr107_wait_processor_intensive_op(phydev);
--}
--
--static int aqr107_resume(struct phy_device *phydev)
--{
--	int err;
--
--	err = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MDIO_CTRL1,
--				 MDIO_CTRL1_LPOWER);
--	if (err)
--		return err;
--
--	return aqr107_wait_processor_intensive_op(phydev);
--}
--
--static int aqr107_probe(struct phy_device *phydev)
--{
--	phydev->priv = devm_kzalloc(&phydev->mdio.dev,
--				    sizeof(struct aqr107_priv), GFP_KERNEL);
--	if (!phydev->priv)
--		return -ENOMEM;
--
--	return aqr_hwmon_probe(phydev);
--}
--
--static struct phy_driver aqr_driver[] = {
--{
--	PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
--	.name		= "Aquantia AQ1202",
--	.config_aneg    = aqr_config_aneg,
--	.config_intr	= aqr_config_intr,
--	.handle_interrupt = aqr_handle_interrupt,
--	.read_status	= aqr_read_status,
--},
--{
--	PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
--	.name		= "Aquantia AQ2104",
--	.config_aneg    = aqr_config_aneg,
--	.config_intr	= aqr_config_intr,
--	.handle_interrupt = aqr_handle_interrupt,
--	.read_status	= aqr_read_status,
--},
--{
--	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
--	.name		= "Aquantia AQR105",
--	.config_aneg    = aqr_config_aneg,
--	.config_intr	= aqr_config_intr,
--	.handle_interrupt = aqr_handle_interrupt,
--	.read_status	= aqr_read_status,
--	.suspend	= aqr107_suspend,
--	.resume		= aqr107_resume,
--},
--{
--	PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
--	.name		= "Aquantia AQR106",
--	.config_aneg    = aqr_config_aneg,
--	.config_intr	= aqr_config_intr,
--	.handle_interrupt = aqr_handle_interrupt,
--	.read_status	= aqr_read_status,
--},
--{
--	PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
--	.name		= "Aquantia AQR107",
--	.probe		= aqr107_probe,
--	.get_rate_matching = aqr107_get_rate_matching,
--	.config_init	= aqr107_config_init,
--	.config_aneg    = aqr_config_aneg,
--	.config_intr	= aqr_config_intr,
--	.handle_interrupt = aqr_handle_interrupt,
--	.read_status	= aqr107_read_status,
--	.get_tunable    = aqr107_get_tunable,
--	.set_tunable    = aqr107_set_tunable,
--	.suspend	= aqr107_suspend,
--	.resume		= aqr107_resume,
--	.get_sset_count	= aqr107_get_sset_count,
--	.get_strings	= aqr107_get_strings,
--	.get_stats	= aqr107_get_stats,
--	.link_change_notify = aqr107_link_change_notify,
--},
--{
--	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
--	.name		= "Aquantia AQCS109",
--	.probe		= aqr107_probe,
--	.get_rate_matching = aqr107_get_rate_matching,
--	.config_init	= aqcs109_config_init,
--	.config_aneg    = aqr_config_aneg,
--	.config_intr	= aqr_config_intr,
--	.handle_interrupt = aqr_handle_interrupt,
--	.read_status	= aqr107_read_status,
--	.get_tunable    = aqr107_get_tunable,
--	.set_tunable    = aqr107_set_tunable,
--	.suspend	= aqr107_suspend,
--	.resume		= aqr107_resume,
--	.get_sset_count	= aqr107_get_sset_count,
--	.get_strings	= aqr107_get_strings,
--	.get_stats	= aqr107_get_stats,
--	.link_change_notify = aqr107_link_change_notify,
--},
--{
--	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
--	.name		= "Aquantia AQR405",
--	.config_aneg    = aqr_config_aneg,
--	.config_intr	= aqr_config_intr,
--	.handle_interrupt = aqr_handle_interrupt,
--	.read_status	= aqr_read_status,
--},
--{
--	PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
--	.name           = "Aquantia AQR113C",
--	.probe          = aqr107_probe,
--	.get_rate_matching = aqr107_get_rate_matching,
--	.config_init    = aqr107_config_init,
--	.config_aneg    = aqr_config_aneg,
--	.config_intr    = aqr_config_intr,
--	.handle_interrupt       = aqr_handle_interrupt,
--	.read_status    = aqr107_read_status,
--	.get_tunable    = aqr107_get_tunable,
--	.set_tunable    = aqr107_set_tunable,
--	.suspend        = aqr107_suspend,
--	.resume         = aqr107_resume,
--	.get_sset_count = aqr107_get_sset_count,
--	.get_strings    = aqr107_get_strings,
--	.get_stats      = aqr107_get_stats,
--	.link_change_notify = aqr107_link_change_notify,
--},
--};
--
--module_phy_driver(aqr_driver);
--
--static struct mdio_device_id __maybe_unused aqr_tbl[] = {
--	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ1202) },
--	{ PHY_ID_MATCH_MODEL(PHY_ID_AQ2104) },
--	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
--	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
--	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
--	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
--	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
--	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
--	{ }
--};
--
--MODULE_DEVICE_TABLE(mdio, aqr_tbl);
--
--MODULE_DESCRIPTION("Aquantia PHY driver");
--MODULE_AUTHOR("Shaohui Xie <Shaohui.Xie@freescale.com>");
--MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/backport-6.1/702-02-v6.7-net-phy-aquantia-move-MMD_VEND-define-to-header.patch b/target/linux/generic/backport-6.1/702-02-v6.7-net-phy-aquantia-move-MMD_VEND-define-to-header.patch
deleted file mode 100644
index 2b9452272377..000000000000
--- a/target/linux/generic/backport-6.1/702-02-v6.7-net-phy-aquantia-move-MMD_VEND-define-to-header.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-From e1fbfa4a995d42e02e22b0dff2f8b4fdee1504b3 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 14 Nov 2023 15:08:42 +0100
-Subject: [PATCH 2/3] net: phy: aquantia: move MMD_VEND define to header
-
-Move MMD_VEND define to header to clean things up and in preparation for
-firmware loading support that require some define placed in
-aquantia_main.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/aquantia/aquantia.h       | 69 +++++++++++++++++++++++
- drivers/net/phy/aquantia/aquantia_hwmon.c | 14 -----
- drivers/net/phy/aquantia/aquantia_main.c  | 55 ------------------
- 3 files changed, 69 insertions(+), 69 deletions(-)
-
---- a/drivers/net/phy/aquantia/aquantia.h
-+++ b/drivers/net/phy/aquantia/aquantia.h
-@@ -9,6 +9,75 @@
- #include <linux/device.h>
- #include <linux/phy.h>
- 
-+/* Vendor specific 1, MDIO_MMD_VEND1 */
-+#define VEND1_GLOBAL_FW_ID			0x0020
-+#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
-+#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
-+
-+/* The following registers all have similar layouts; first the registers... */
-+#define VEND1_GLOBAL_CFG_10M			0x0310
-+#define VEND1_GLOBAL_CFG_100M			0x031b
-+#define VEND1_GLOBAL_CFG_1G			0x031c
-+#define VEND1_GLOBAL_CFG_2_5G			0x031d
-+#define VEND1_GLOBAL_CFG_5G			0x031e
-+#define VEND1_GLOBAL_CFG_10G			0x031f
-+/* ...and now the fields */
-+#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
-+#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
-+#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
-+#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
-+
-+/* Vendor specific 1, MDIO_MMD_VEND2 */
-+#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
-+#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
-+#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
-+#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
-+#define VEND1_THERMAL_STAT1			0xc820
-+#define VEND1_THERMAL_STAT2			0xc821
-+#define VEND1_THERMAL_STAT2_VALID		BIT(0)
-+#define VEND1_GENERAL_STAT1			0xc830
-+#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
-+#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
-+#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
-+#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
-+
-+#define VEND1_GLOBAL_GEN_STAT2			0xc831
-+#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
-+
-+#define VEND1_GLOBAL_RSVD_STAT1			0xc885
-+#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
-+#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
-+
-+#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
-+#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
-+#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
-+
-+#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
-+#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
-+
-+#define VEND1_GLOBAL_INT_STD_MASK		0xff00
-+#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
-+#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
-+#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
-+#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
-+#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
-+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
-+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
-+#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
-+#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
-+#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
-+#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
-+
-+#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
-+#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
-+#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
-+#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
-+#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
-+#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
-+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
-+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
-+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
-+
- #if IS_REACHABLE(CONFIG_HWMON)
- int aqr_hwmon_probe(struct phy_device *phydev);
- #else
---- a/drivers/net/phy/aquantia/aquantia_hwmon.c
-+++ b/drivers/net/phy/aquantia/aquantia_hwmon.c
-@@ -13,20 +13,6 @@
- 
- #include "aquantia.h"
- 
--/* Vendor specific 1, MDIO_MMD_VEND2 */
--#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
--#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
--#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
--#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
--#define VEND1_THERMAL_STAT1			0xc820
--#define VEND1_THERMAL_STAT2			0xc821
--#define VEND1_THERMAL_STAT2_VALID		BIT(0)
--#define VEND1_GENERAL_STAT1			0xc830
--#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
--#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
--#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
--#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
--
- #if IS_REACHABLE(CONFIG_HWMON)
- 
- static umode_t aqr_hwmon_is_visible(const void *data,
---- a/drivers/net/phy/aquantia/aquantia_main.c
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -89,61 +89,6 @@
- #define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR	0xd31a
- #define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES		0xd31b
- 
--/* Vendor specific 1, MDIO_MMD_VEND1 */
--#define VEND1_GLOBAL_FW_ID			0x0020
--#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
--#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
--
--#define VEND1_GLOBAL_GEN_STAT2			0xc831
--#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
--
--/* The following registers all have similar layouts; first the registers... */
--#define VEND1_GLOBAL_CFG_10M			0x0310
--#define VEND1_GLOBAL_CFG_100M			0x031b
--#define VEND1_GLOBAL_CFG_1G			0x031c
--#define VEND1_GLOBAL_CFG_2_5G			0x031d
--#define VEND1_GLOBAL_CFG_5G			0x031e
--#define VEND1_GLOBAL_CFG_10G			0x031f
--/* ...and now the fields */
--#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
--#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
--#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
--#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
--
--#define VEND1_GLOBAL_RSVD_STAT1			0xc885
--#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
--#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
--
--#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
--#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
--#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
--
--#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
--#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
--
--#define VEND1_GLOBAL_INT_STD_MASK		0xff00
--#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
--#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
--#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
--#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
--#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
--#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
--#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
--#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
--#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
--#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
--#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
--
--#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
--#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
--#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
--#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
--#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
--#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
--#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
--#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
--#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
--
- /* Sleep and timeout for checking if the Processor-Intensive
-  * MDIO operation is finished
-  */
diff --git a/target/linux/generic/backport-6.1/702-03-v6.7-net-phy-aquantia-add-firmware-load-support.patch b/target/linux/generic/backport-6.1/702-03-v6.7-net-phy-aquantia-add-firmware-load-support.patch
deleted file mode 100644
index aa52b3baa64c..000000000000
--- a/target/linux/generic/backport-6.1/702-03-v6.7-net-phy-aquantia-add-firmware-load-support.patch
+++ /dev/null
@@ -1,504 +0,0 @@
-From e93984ebc1c82bd34f7a1b3391efaceee0a8ae96 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Tue, 14 Nov 2023 15:08:43 +0100
-Subject: [PATCH 3/3] net: phy: aquantia: add firmware load support
-
-Aquantia PHY-s require firmware to be loaded before they start operating.
-It can be automatically loaded in case when there is a SPI-NOR connected
-to Aquantia PHY-s or can be loaded from the host via MDIO.
-
-This patch adds support for loading the firmware via MDIO as in most cases
-there is no SPI-NOR being used to save on cost.
-Firmware loading code itself is ported from mainline U-boot with cleanups.
-
-The firmware has mixed values both in big and little endian.
-PHY core itself is big-endian but it expects values to be in little-endian.
-The firmware is little-endian but CRC-16 value for it is stored at the end
-of firmware in big-endian.
-
-It seems the PHY does the conversion internally from firmware that is
-little-endian to the PHY that is big-endian on using the mailbox
-but mailbox returns a big-endian CRC-16 to verify the written data
-integrity.
-
-Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/aquantia/Kconfig             |   1 +
- drivers/net/phy/aquantia/Makefile            |   2 +-
- drivers/net/phy/aquantia/aquantia.h          |  32 ++
- drivers/net/phy/aquantia/aquantia_firmware.c | 370 +++++++++++++++++++
- drivers/net/phy/aquantia/aquantia_main.c     |   6 +
- 5 files changed, 410 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/phy/aquantia/aquantia_firmware.c
-
---- a/drivers/net/phy/aquantia/Kconfig
-+++ b/drivers/net/phy/aquantia/Kconfig
-@@ -1,5 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0-only
- config AQUANTIA_PHY
- 	tristate "Aquantia PHYs"
-+	select CRC_CCITT
- 	help
- 	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
---- a/drivers/net/phy/aquantia/Makefile
-+++ b/drivers/net/phy/aquantia/Makefile
-@@ -1,5 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0
--aquantia-objs			+= aquantia_main.o
-+aquantia-objs			+= aquantia_main.o aquantia_firmware.o
- ifdef CONFIG_HWMON
- aquantia-objs			+= aquantia_hwmon.o
- endif
---- a/drivers/net/phy/aquantia/aquantia.h
-+++ b/drivers/net/phy/aquantia/aquantia.h
-@@ -10,10 +10,35 @@
- #include <linux/phy.h>
- 
- /* Vendor specific 1, MDIO_MMD_VEND1 */
-+#define VEND1_GLOBAL_SC				0x0
-+#define VEND1_GLOBAL_SC_SOFT_RESET		BIT(15)
-+#define VEND1_GLOBAL_SC_LOW_POWER		BIT(11)
-+
- #define VEND1_GLOBAL_FW_ID			0x0020
- #define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
- #define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
- 
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE1			0x0200
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE1_EXECUTE		BIT(15)
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE1_WRITE		BIT(14)
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE1_CRC_RESET	BIT(12)
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE1_BUSY		BIT(8)
-+
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE2			0x0201
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE3			0x0202
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR_MASK	GENMASK(15, 0)
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR_MASK, (u16)((x) >> 16))
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE4			0x0203
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR_MASK	GENMASK(15, 2)
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR_MASK, (u16)(x))
-+
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE5			0x0204
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA_MASK	GENMASK(15, 0)
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA_MASK, (u16)((x) >> 16))
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE6			0x0205
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA_MASK	GENMASK(15, 0)
-+#define VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA_MASK, (u16)(x))
-+
- /* The following registers all have similar layouts; first the registers... */
- #define VEND1_GLOBAL_CFG_10M			0x0310
- #define VEND1_GLOBAL_CFG_100M			0x031b
-@@ -28,6 +53,11 @@
- #define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
- 
- /* Vendor specific 1, MDIO_MMD_VEND2 */
-+#define VEND1_GLOBAL_CONTROL2			0xc001
-+#define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_RST	BIT(15)
-+#define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD	BIT(6)
-+#define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL	BIT(0)
-+
- #define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
- #define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
- #define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
-@@ -83,3 +113,5 @@ int aqr_hwmon_probe(struct phy_device *p
- #else
- static inline int aqr_hwmon_probe(struct phy_device *phydev) { return 0; }
- #endif
-+
-+int aqr_firmware_load(struct phy_device *phydev);
---- /dev/null
-+++ b/drivers/net/phy/aquantia/aquantia_firmware.c
-@@ -0,0 +1,370 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#include <linux/bitfield.h>
-+#include <linux/of.h>
-+#include <linux/firmware.h>
-+#include <linux/crc-ccitt.h>
-+#include <linux/nvmem-consumer.h>
-+
-+#include <asm/unaligned.h>
-+
-+#include "aquantia.h"
-+
-+#define UP_RESET_SLEEP		100
-+
-+/* addresses of memory segments in the phy */
-+#define DRAM_BASE_ADDR		0x3FFE0000
-+#define IRAM_BASE_ADDR		0x40000000
-+
-+/* firmware image format constants */
-+#define VERSION_STRING_SIZE		0x40
-+#define VERSION_STRING_OFFSET		0x0200
-+/* primary offset is written at an offset from the start of the fw blob */
-+#define PRIMARY_OFFSET_OFFSET		0x8
-+/* primary offset needs to be then added to a base offset */
-+#define PRIMARY_OFFSET_SHIFT		12
-+#define PRIMARY_OFFSET(x)		((x) << PRIMARY_OFFSET_SHIFT)
-+#define HEADER_OFFSET			0x300
-+
-+struct aqr_fw_header {
-+	u32 padding;
-+	u8 iram_offset[3];
-+	u8 iram_size[3];
-+	u8 dram_offset[3];
-+	u8 dram_size[3];
-+} __packed;
-+
-+enum aqr_fw_src {
-+	AQR_FW_SRC_NVMEM = 0,
-+	AQR_FW_SRC_FS,
-+};
-+
-+static const char * const aqr_fw_src_string[] = {
-+	[AQR_FW_SRC_NVMEM] = "NVMEM",
-+	[AQR_FW_SRC_FS] = "FS",
-+};
-+
-+/* AQR firmware doesn't have fixed offsets for iram and dram section
-+ * but instead provide an header with the offset to use on reading
-+ * and parsing the firmware.
-+ *
-+ * AQR firmware can't be trusted and each offset is validated to be
-+ * not negative and be in the size of the firmware itself.
-+ */
-+static bool aqr_fw_validate_get(size_t size, size_t offset, size_t get_size)
-+{
-+	return offset + get_size <= size;
-+}
-+
-+static int aqr_fw_get_be16(const u8 *data, size_t offset, size_t size, u16 *value)
-+{
-+	if (!aqr_fw_validate_get(size, offset, sizeof(u16)))
-+		return -EINVAL;
-+
-+	*value = get_unaligned_be16(data + offset);
-+
-+	return 0;
-+}
-+
-+static int aqr_fw_get_le16(const u8 *data, size_t offset, size_t size, u16 *value)
-+{
-+	if (!aqr_fw_validate_get(size, offset, sizeof(u16)))
-+		return -EINVAL;
-+
-+	*value = get_unaligned_le16(data + offset);
-+
-+	return 0;
-+}
-+
-+static int aqr_fw_get_le24(const u8 *data, size_t offset, size_t size, u32 *value)
-+{
-+	if (!aqr_fw_validate_get(size, offset, sizeof(u8) * 3))
-+		return -EINVAL;
-+
-+	*value = get_unaligned_le24(data + offset);
-+
-+	return 0;
-+}
-+
-+/* load data into the phy's memory */
-+static int aqr_fw_load_memory(struct phy_device *phydev, u32 addr,
-+			      const u8 *data, size_t len)
-+{
-+	u16 crc = 0, up_crc;
-+	size_t pos;
-+
-+	/* PHY expect addr in LE */
-+	addr = (__force u32)cpu_to_le32(addr);
-+
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1,
-+		      VEND1_GLOBAL_MAILBOX_INTERFACE1,
-+		      VEND1_GLOBAL_MAILBOX_INTERFACE1_CRC_RESET);
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1,
-+		      VEND1_GLOBAL_MAILBOX_INTERFACE3,
-+		      VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR(addr));
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1,
-+		      VEND1_GLOBAL_MAILBOX_INTERFACE4,
-+		      VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR(addr));
-+
-+	/* We assume and enforce the size to be word aligned.
-+	 * If a firmware that is not word aligned is found, please report upstream.
-+	 */
-+	for (pos = 0; pos < len; pos += sizeof(u32)) {
-+		u32 word;
-+
-+		/* FW data is always stored in little-endian */
-+		word = get_unaligned((const u32 *)(data + pos));
-+
-+		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE5,
-+			      VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA(word));
-+		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE6,
-+			      VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA(word));
-+
-+		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE1,
-+			      VEND1_GLOBAL_MAILBOX_INTERFACE1_EXECUTE |
-+			      VEND1_GLOBAL_MAILBOX_INTERFACE1_WRITE);
-+
-+		/* calculate CRC as we load data to the mailbox.
-+		 * We convert word to big-endian as PHY is BE and mailbox will
-+		 * return a BE CRC.
-+		 */
-+		word = (__force u32)cpu_to_be32(word);
-+		crc = crc_ccitt_false(crc, (u8 *)&word, sizeof(word));
-+	}
-+
-+	up_crc = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE2);
-+	if (crc != up_crc) {
-+		phydev_err(phydev, "CRC mismatch: calculated 0x%04x PHY 0x%04x\n",
-+			   crc, up_crc);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int aqr_fw_boot(struct phy_device *phydev, const u8 *data, size_t size,
-+		       enum aqr_fw_src fw_src)
-+{
-+	u16 calculated_crc, read_crc, read_primary_offset;
-+	u32 iram_offset = 0, iram_size = 0;
-+	u32 dram_offset = 0, dram_size = 0;
-+	char version[VERSION_STRING_SIZE];
-+	u32 primary_offset = 0;
-+	int ret;
-+
-+	/* extract saved CRC at the end of the fw
-+	 * CRC is saved in big-endian as PHY is BE
-+	 */
-+	ret = aqr_fw_get_be16(data, size - sizeof(u16), size, &read_crc);
-+	if (ret) {
-+		phydev_err(phydev, "bad firmware CRC in firmware\n");
-+		return ret;
-+	}
-+	calculated_crc = crc_ccitt_false(0, data, size - sizeof(u16));
-+	if (read_crc != calculated_crc) {
-+		phydev_err(phydev, "bad firmware CRC: file 0x%04x calculated 0x%04x\n",
-+			   read_crc, calculated_crc);
-+		return -EINVAL;
-+	}
-+
-+	/* Get the primary offset to extract DRAM and IRAM sections. */
-+	ret = aqr_fw_get_le16(data, PRIMARY_OFFSET_OFFSET, size, &read_primary_offset);
-+	if (ret) {
-+		phydev_err(phydev, "bad primary offset in firmware\n");
-+		return ret;
-+	}
-+	primary_offset = PRIMARY_OFFSET(read_primary_offset);
-+
-+	/* Find the DRAM and IRAM sections within the firmware file.
-+	 * Make sure the fw_header is correctly in the firmware.
-+	 */
-+	if (!aqr_fw_validate_get(size, primary_offset + HEADER_OFFSET,
-+				 sizeof(struct aqr_fw_header))) {
-+		phydev_err(phydev, "bad fw_header in firmware\n");
-+		return -EINVAL;
-+	}
-+
-+	/* offset are in LE and values needs to be converted to cpu endian */
-+	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
-+			      offsetof(struct aqr_fw_header, iram_offset),
-+			      size, &iram_offset);
-+	if (ret) {
-+		phydev_err(phydev, "bad iram offset in firmware\n");
-+		return ret;
-+	}
-+	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
-+			      offsetof(struct aqr_fw_header, iram_size),
-+			      size, &iram_size);
-+	if (ret) {
-+		phydev_err(phydev, "invalid iram size in firmware\n");
-+		return ret;
-+	}
-+	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
-+			      offsetof(struct aqr_fw_header, dram_offset),
-+			      size, &dram_offset);
-+	if (ret) {
-+		phydev_err(phydev, "bad dram offset in firmware\n");
-+		return ret;
-+	}
-+	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
-+			      offsetof(struct aqr_fw_header, dram_size),
-+			      size, &dram_size);
-+	if (ret) {
-+		phydev_err(phydev, "invalid dram size in firmware\n");
-+		return ret;
-+	}
-+
-+	/* Increment the offset with the primary offset.
-+	 * Validate iram/dram offset and size.
-+	 */
-+	iram_offset += primary_offset;
-+	if (iram_size % sizeof(u32)) {
-+		phydev_err(phydev, "iram size if not aligned to word size. Please report this upstream!\n");
-+		return -EINVAL;
-+	}
-+	if (!aqr_fw_validate_get(size, iram_offset, iram_size)) {
-+		phydev_err(phydev, "invalid iram offset for iram size\n");
-+		return -EINVAL;
-+	}
-+
-+	dram_offset += primary_offset;
-+	if (dram_size % sizeof(u32)) {
-+		phydev_err(phydev, "dram size if not aligned to word size. Please report this upstream!\n");
-+		return -EINVAL;
-+	}
-+	if (!aqr_fw_validate_get(size, dram_offset, dram_size)) {
-+		phydev_err(phydev, "invalid iram offset for iram size\n");
-+		return -EINVAL;
-+	}
-+
-+	phydev_dbg(phydev, "primary %d IRAM offset=%d size=%d DRAM offset=%d size=%d\n",
-+		   primary_offset, iram_offset, iram_size, dram_offset, dram_size);
-+
-+	if (!aqr_fw_validate_get(size, dram_offset + VERSION_STRING_OFFSET,
-+				 VERSION_STRING_SIZE)) {
-+		phydev_err(phydev, "invalid version in firmware\n");
-+		return -EINVAL;
-+	}
-+	strscpy(version, (char *)data + dram_offset + VERSION_STRING_OFFSET,
-+		VERSION_STRING_SIZE);
-+	if (version[0] == '\0') {
-+		phydev_err(phydev, "invalid version in firmware\n");
-+		return -EINVAL;
-+	}
-+	phydev_info(phydev, "loading firmware version '%s' from '%s'\n", version,
-+		    aqr_fw_src_string[fw_src]);
-+
-+	/* stall the microcprocessor */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
-+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL | VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD);
-+
-+	phydev_dbg(phydev, "loading DRAM 0x%08x from offset=%d size=%d\n",
-+		   DRAM_BASE_ADDR, dram_offset, dram_size);
-+	ret = aqr_fw_load_memory(phydev, DRAM_BASE_ADDR, data + dram_offset,
-+				 dram_size);
-+	if (ret)
-+		return ret;
-+
-+	phydev_dbg(phydev, "loading IRAM 0x%08x from offset=%d size=%d\n",
-+		   IRAM_BASE_ADDR, iram_offset, iram_size);
-+	ret = aqr_fw_load_memory(phydev, IRAM_BASE_ADDR, data + iram_offset,
-+				 iram_size);
-+	if (ret)
-+		return ret;
-+
-+	/* make sure soft reset and low power mode are clear */
-+	phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_SC,
-+			   VEND1_GLOBAL_SC_SOFT_RESET | VEND1_GLOBAL_SC_LOW_POWER);
-+
-+	/* Release the microprocessor. UP_RESET must be held for 100 usec. */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
-+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL |
-+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD |
-+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_RST);
-+	usleep_range(UP_RESET_SLEEP, UP_RESET_SLEEP * 2);
-+
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
-+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD);
-+
-+	return 0;
-+}
-+
-+static int aqr_firmware_load_nvmem(struct phy_device *phydev)
-+{
-+	struct nvmem_cell *cell;
-+	size_t size;
-+	u8 *buf;
-+	int ret;
-+
-+	cell = nvmem_cell_get(&phydev->mdio.dev, "firmware");
-+	if (IS_ERR(cell))
-+		return PTR_ERR(cell);
-+
-+	buf = nvmem_cell_read(cell, &size);
-+	if (IS_ERR(buf)) {
-+		ret = PTR_ERR(buf);
-+		goto exit;
-+	}
-+
-+	ret = aqr_fw_boot(phydev, buf, size, AQR_FW_SRC_NVMEM);
-+	if (ret)
-+		phydev_err(phydev, "firmware loading failed: %d\n", ret);
-+
-+	kfree(buf);
-+exit:
-+	nvmem_cell_put(cell);
-+
-+	return ret;
-+}
-+
-+static int aqr_firmware_load_fs(struct phy_device *phydev)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	const struct firmware *fw;
-+	const char *fw_name;
-+	int ret;
-+
-+	ret = of_property_read_string(dev->of_node, "firmware-name",
-+				      &fw_name);
-+	if (ret)
-+		return ret;
-+
-+	ret = request_firmware(&fw, fw_name, dev);
-+	if (ret) {
-+		phydev_err(phydev, "failed to find FW file %s (%d)\n",
-+			   fw_name, ret);
-+		return ret;
-+	}
-+
-+	ret = aqr_fw_boot(phydev, fw->data, fw->size, AQR_FW_SRC_FS);
-+	if (ret)
-+		phydev_err(phydev, "firmware loading failed: %d\n", ret);
-+
-+	release_firmware(fw);
-+
-+	return ret;
-+}
-+
-+int aqr_firmware_load(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* Check if the firmware is not already loaded by pooling
-+	 * the current version returned by the PHY. If 0 is returned,
-+	 * no firmware is loaded.
-+	 */
-+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
-+	if (ret > 0)
-+		goto exit;
-+
-+	ret = aqr_firmware_load_nvmem(phydev);
-+	if (!ret)
-+		goto exit;
-+
-+	ret = aqr_firmware_load_fs(phydev);
-+	if (ret)
-+		return ret;
-+
-+exit:
-+	return 0;
-+}
---- a/drivers/net/phy/aquantia/aquantia_main.c
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -656,11 +656,17 @@ static int aqr107_resume(struct phy_devi
- 
- static int aqr107_probe(struct phy_device *phydev)
- {
-+	int ret;
-+
- 	phydev->priv = devm_kzalloc(&phydev->mdio.dev,
- 				    sizeof(struct aqr107_priv), GFP_KERNEL);
- 	if (!phydev->priv)
- 		return -ENOMEM;
- 
-+	ret = aqr_firmware_load(phydev);
-+	if (ret)
-+		return ret;
-+
- 	return aqr_hwmon_probe(phydev);
- }
- 
diff --git a/target/linux/generic/backport-6.1/703-v6.3-net-mdio-Add-dedicated-C45-API-to-MDIO-bus-drivers.patch b/target/linux/generic/backport-6.1/703-v6.3-net-mdio-Add-dedicated-C45-API-to-MDIO-bus-drivers.patch
deleted file mode 100644
index ff186742ba49..000000000000
--- a/target/linux/generic/backport-6.1/703-v6.3-net-mdio-Add-dedicated-C45-API-to-MDIO-bus-drivers.patch
+++ /dev/null
@@ -1,326 +0,0 @@
-From 4e4aafcddbbfcdd6eed5780e190fcbfac8b4685a Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 9 Jan 2023 16:30:41 +0100
-Subject: [PATCH] net: mdio: Add dedicated C45 API to MDIO bus drivers
-
-Currently C22 and C45 transactions are mixed over a combined API calls
-which make use of a special bit in the reg address to indicate if a
-C45 transaction should be performed. This makes it impossible to know
-if the bus driver actually supports C45. Additionally, many C22 only
-drivers don't return -EOPNOTSUPP when asked to perform a C45
-transaction, they mistaking perform a C22 transaction.
-
-This is the first step to cleanly separate C22 from C45. To maintain
-backwards compatibility until all drivers which are capable of
-performing C45 are converted to this new API, the helper functions
-will fall back to the older API if the new API is not
-supported. Eventually this fallback will be removed.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/mdio_bus.c | 189 +++++++++++++++++++++++++++++++++++++
- include/linux/mdio.h       |  39 ++++----
- include/linux/phy.h        |   5 +
- 3 files changed, 214 insertions(+), 19 deletions(-)
-
---- a/drivers/net/phy/mdio_bus.c
-+++ b/drivers/net/phy/mdio_bus.c
-@@ -832,6 +832,100 @@ int __mdiobus_modify_changed(struct mii_
- EXPORT_SYMBOL_GPL(__mdiobus_modify_changed);
- 
- /**
-+ * __mdiobus_c45_read - Unlocked version of the mdiobus_c45_read function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @devad: device address to read
-+ * @regnum: register number to read
-+ *
-+ * Read a MDIO bus register. Caller must hold the mdio bus lock.
-+ *
-+ * NOTE: MUST NOT be called from interrupt context.
-+ */
-+int __mdiobus_c45_read(struct mii_bus *bus, int addr, int devad, u32 regnum)
-+{
-+	int retval;
-+
-+	lockdep_assert_held_once(&bus->mdio_lock);
-+
-+	if (bus->read_c45)
-+		retval = bus->read_c45(bus, addr, devad, regnum);
-+	else
-+		retval = bus->read(bus, addr, mdiobus_c45_addr(devad, regnum));
-+
-+	trace_mdio_access(bus, 1, addr, regnum, retval, retval);
-+	mdiobus_stats_acct(&bus->stats[addr], true, retval);
-+
-+	return retval;
-+}
-+EXPORT_SYMBOL(__mdiobus_c45_read);
-+
-+/**
-+ * __mdiobus_c45_write - Unlocked version of the mdiobus_write function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @devad: device address to read
-+ * @regnum: register number to write
-+ * @val: value to write to @regnum
-+ *
-+ * Write a MDIO bus register. Caller must hold the mdio bus lock.
-+ *
-+ * NOTE: MUST NOT be called from interrupt context.
-+ */
-+int __mdiobus_c45_write(struct mii_bus *bus, int addr, int devad, u32 regnum,
-+			u16 val)
-+{
-+	int err;
-+
-+	lockdep_assert_held_once(&bus->mdio_lock);
-+
-+	if (bus->write_c45)
-+		err = bus->write_c45(bus, addr, devad, regnum, val);
-+	else
-+		err = bus->write(bus, addr, mdiobus_c45_addr(devad, regnum),
-+				 val);
-+
-+	trace_mdio_access(bus, 0, addr, regnum, val, err);
-+	mdiobus_stats_acct(&bus->stats[addr], false, err);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(__mdiobus_c45_write);
-+
-+/**
-+ * __mdiobus_c45_modify_changed - Unlocked version of the mdiobus_modify function
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @devad: device address to read
-+ * @regnum: register number to modify
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ *
-+ * Read, modify, and if any change, write the register value back to the
-+ * device. Any error returns a negative number.
-+ *
-+ * NOTE: MUST NOT be called from interrupt context.
-+ */
-+static int __mdiobus_c45_modify_changed(struct mii_bus *bus, int addr,
-+					int devad, u32 regnum, u16 mask,
-+					u16 set)
-+{
-+	int new, ret;
-+
-+	ret = __mdiobus_c45_read(bus, addr, devad, regnum);
-+	if (ret < 0)
-+		return ret;
-+
-+	new = (ret & ~mask) | set;
-+	if (new == ret)
-+		return 0;
-+
-+	ret = __mdiobus_c45_write(bus, addr, devad, regnum, new);
-+
-+	return ret < 0 ? ret : 1;
-+}
-+
-+/**
-  * mdiobus_read_nested - Nested version of the mdiobus_read function
-  * @bus: the mii_bus struct
-  * @addr: the phy address
-@@ -879,6 +973,29 @@ int mdiobus_read(struct mii_bus *bus, in
- EXPORT_SYMBOL(mdiobus_read);
- 
- /**
-+ * mdiobus_c45_read - Convenience function for reading a given MII mgmt register
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @devad: device address to read
-+ * @regnum: register number to read
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int mdiobus_c45_read(struct mii_bus *bus, int addr, int devad, u32 regnum)
-+{
-+	int retval;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	retval = __mdiobus_c45_read(bus, addr, devad, regnum);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return retval;
-+}
-+EXPORT_SYMBOL(mdiobus_c45_read);
-+
-+/**
-  * mdiobus_write_nested - Nested version of the mdiobus_write function
-  * @bus: the mii_bus struct
-  * @addr: the phy address
-@@ -928,6 +1045,31 @@ int mdiobus_write(struct mii_bus *bus, i
- EXPORT_SYMBOL(mdiobus_write);
- 
- /**
-+ * mdiobus_c45_write - Convenience function for writing a given MII mgmt register
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @devad: device address to read
-+ * @regnum: register number to write
-+ * @val: value to write to @regnum
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int mdiobus_c45_write(struct mii_bus *bus, int addr, int devad, u32 regnum,
-+		      u16 val)
-+{
-+	int err;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	err = __mdiobus_c45_write(bus, addr, devad, regnum, val);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL(mdiobus_c45_write);
-+
-+/**
-  * mdiobus_modify - Convenience function for modifying a given mdio device
-  *	register
-  * @bus: the mii_bus struct
-@@ -949,6 +1091,30 @@ int mdiobus_modify(struct mii_bus *bus,
- EXPORT_SYMBOL_GPL(mdiobus_modify);
- 
- /**
-+ * mdiobus_c45_modify - Convenience function for modifying a given mdio device
-+ *	register
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @devad: device address to read
-+ * @regnum: register number to write
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ */
-+int mdiobus_c45_modify(struct mii_bus *bus, int addr, int devad, u32 regnum,
-+		       u16 mask, u16 set)
-+{
-+	int err;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	err = __mdiobus_c45_modify_changed(bus, addr, devad, regnum,
-+					   mask, set);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return err < 0 ? err : 0;
-+}
-+EXPORT_SYMBOL_GPL(mdiobus_c45_modify);
-+
-+/**
-  * mdiobus_modify_changed - Convenience function for modifying a given mdio
-  *	device register and returning if it changed
-  * @bus: the mii_bus struct
-@@ -971,6 +1137,29 @@ int mdiobus_modify_changed(struct mii_bu
- EXPORT_SYMBOL_GPL(mdiobus_modify_changed);
- 
- /**
-+ * mdiobus_c45_modify_changed - Convenience function for modifying a given mdio
-+ *	device register and returning if it changed
-+ * @bus: the mii_bus struct
-+ * @addr: the phy address
-+ * @devad: device address to read
-+ * @regnum: register number to write
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ */
-+int mdiobus_c45_modify_changed(struct mii_bus *bus, int devad, int addr,
-+			       u32 regnum, u16 mask, u16 set)
-+{
-+	int err;
-+
-+	mutex_lock(&bus->mdio_lock);
-+	err = __mdiobus_c45_modify_changed(bus, addr, devad, regnum, mask, set);
-+	mutex_unlock(&bus->mdio_lock);
-+
-+	return err;
-+}
-+EXPORT_SYMBOL_GPL(mdiobus_c45_modify_changed);
-+
-+/**
-  * mdio_bus_match - determine if given MDIO driver supports the given
-  *		    MDIO device
-  * @dev: target MDIO device
---- a/include/linux/mdio.h
-+++ b/include/linux/mdio.h
-@@ -423,6 +423,17 @@ int mdiobus_modify(struct mii_bus *bus,
- 		   u16 set);
- int mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum,
- 			   u16 mask, u16 set);
-+int __mdiobus_c45_read(struct mii_bus *bus, int addr, int devad, u32 regnum);
-+int mdiobus_c45_read(struct mii_bus *bus, int addr, int devad, u32 regnum);
-+int __mdiobus_c45_write(struct mii_bus *bus, int addr,  int devad, u32 regnum,
-+			u16 val);
-+int mdiobus_c45_write(struct mii_bus *bus, int addr,  int devad, u32 regnum,
-+		      u16 val);
-+int mdiobus_c45_modify(struct mii_bus *bus, int addr, int devad, u32 regnum,
-+		       u16 mask, u16 set);
-+
-+int mdiobus_c45_modify_changed(struct mii_bus *bus, int addr, int devad,
-+			       u32 regnum, u16 mask, u16 set);
- 
- static inline int mdiodev_read(struct mdio_device *mdiodev, u32 regnum)
- {
-@@ -463,29 +474,19 @@ static inline u16 mdiobus_c45_devad(u32
- 	return FIELD_GET(MII_DEVADDR_C45_MASK, regnum);
- }
- 
--static inline int __mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad,
--				     u16 regnum)
--{
--	return __mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum));
--}
--
--static inline int __mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad,
--				      u16 regnum, u16 val)
--{
--	return __mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum),
--			       val);
--}
--
--static inline int mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad,
--				   u16 regnum)
-+static inline int mdiodev_c45_modify(struct mdio_device *mdiodev, int devad,
-+				     u32 regnum, u16 mask, u16 set)
- {
--	return mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum));
-+	return mdiobus_c45_modify(mdiodev->bus, mdiodev->addr, devad, regnum,
-+				  mask, set);
- }
- 
--static inline int mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad,
--				    u16 regnum, u16 val)
-+static inline int mdiodev_c45_modify_changed(struct mdio_device *mdiodev,
-+					     int devad, u32 regnum, u16 mask,
-+					     u16 set)
- {
--	return mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum), val);
-+	return mdiobus_c45_modify_changed(mdiodev->bus, mdiodev->addr, devad,
-+					  regnum, mask, set);
- }
- 
- int mdiobus_register_device(struct mdio_device *mdiodev);
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -364,6 +364,11 @@ struct mii_bus {
- 	int (*read)(struct mii_bus *bus, int addr, int regnum);
- 	/** @write: Perform a write transfer on the bus */
- 	int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val);
-+	/** @read_c45: Perform a C45 read transfer on the bus */
-+	int (*read_c45)(struct mii_bus *bus, int addr, int devnum, int regnum);
-+	/** @write_c45: Perform a C45 write transfer on the bus */
-+	int (*write_c45)(struct mii_bus *bus, int addr, int devnum,
-+			 int regnum, u16 val);
- 	/** @reset: Perform a reset of the bus */
- 	int (*reset)(struct mii_bus *bus);
- 
diff --git a/target/linux/generic/backport-6.1/704-v6.6-net-phy-Introduce-PSGMII-PHY-interface-mode.patch b/target/linux/generic/backport-6.1/704-v6.6-net-phy-Introduce-PSGMII-PHY-interface-mode.patch
deleted file mode 100644
index 80210e6da1eb..000000000000
--- a/target/linux/generic/backport-6.1/704-v6.6-net-phy-Introduce-PSGMII-PHY-interface-mode.patch
+++ /dev/null
@@ -1,105 +0,0 @@
-From 9a0e95e34e9c0a713ddfd48c3a88a20d2bdfd514 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <j4g8y7@gmail.com>
-Date: Fri, 11 Aug 2023 13:10:07 +0200
-Subject: [PATCH] net: phy: Introduce PSGMII PHY interface mode
-
-The PSGMII interface is similar to QSGMII. The main difference
-is that the PSGMII interface combines five SGMII lines into a
-single link while in QSGMII only four lines are combined.
-
-Similarly to the QSGMII, this interface mode might also needs
-special handling within the MAC driver.
-
-It is commonly used by Qualcomm with their QCA807x PHY series and
-modern WiSoC-s.
-
-Add definitions for the PHY layer to allow to express this type
-of connection between the MAC and PHY.
-
-Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/networking/phy.rst | 4 ++++
- drivers/net/phy/phy-core.c       | 2 ++
- drivers/net/phy/phylink.c        | 3 +++
- include/linux/phy.h              | 4 ++++
- 4 files changed, 13 insertions(+)
-
---- a/Documentation/networking/phy.rst
-+++ b/Documentation/networking/phy.rst
-@@ -323,6 +323,10 @@ Some of the interface modes are describe
-     contrast with the 1000BASE-X phy mode used for Clause 38 and 39 PMDs, this
-     interface mode has different autonegotiation and only supports full duplex.
- 
-+``PHY_INTERFACE_MODE_PSGMII``
-+    This is the Penta SGMII mode, it is similar to QSGMII but it combines 5
-+    SGMII lines into a single link compared to 4 on QSGMII.
-+
- Pause frames / flow control
- ===========================
- 
---- a/drivers/net/phy/phy-core.c
-+++ b/drivers/net/phy/phy-core.c
-@@ -140,6 +140,8 @@ int phy_interface_num_ports(phy_interfac
- 	case PHY_INTERFACE_MODE_QSGMII:
- 	case PHY_INTERFACE_MODE_QUSGMII:
- 		return 4;
-+	case PHY_INTERFACE_MODE_PSGMII:
-+		return 5;
- 	case PHY_INTERFACE_MODE_MAX:
- 		WARN_ONCE(1, "PHY_INTERFACE_MODE_MAX isn't a valid interface mode");
- 		return 0;
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -187,6 +187,7 @@ static int phylink_interface_max_speed(p
- 	case PHY_INTERFACE_MODE_RGMII_RXID:
- 	case PHY_INTERFACE_MODE_RGMII_ID:
- 	case PHY_INTERFACE_MODE_RGMII:
-+	case PHY_INTERFACE_MODE_PSGMII:
- 	case PHY_INTERFACE_MODE_QSGMII:
- 	case PHY_INTERFACE_MODE_QUSGMII:
- 	case PHY_INTERFACE_MODE_SGMII:
-@@ -448,6 +449,7 @@ unsigned long phylink_get_capabilities(p
- 	case PHY_INTERFACE_MODE_RGMII_RXID:
- 	case PHY_INTERFACE_MODE_RGMII_ID:
- 	case PHY_INTERFACE_MODE_RGMII:
-+	case PHY_INTERFACE_MODE_PSGMII:
- 	case PHY_INTERFACE_MODE_QSGMII:
- 	case PHY_INTERFACE_MODE_QUSGMII:
- 	case PHY_INTERFACE_MODE_SGMII:
-@@ -814,6 +816,7 @@ static int phylink_parse_mode(struct phy
- 
- 		switch (pl->link_config.interface) {
- 		case PHY_INTERFACE_MODE_SGMII:
-+		case PHY_INTERFACE_MODE_PSGMII:
- 		case PHY_INTERFACE_MODE_QSGMII:
- 		case PHY_INTERFACE_MODE_QUSGMII:
- 		case PHY_INTERFACE_MODE_RGMII:
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -103,6 +103,7 @@ extern const int phy_10gbit_features_arr
-  * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface
-  * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface
-  * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax
-+ * @PHY_INTERFACE_MODE_PSGMII: Penta SGMII
-  * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII
-  * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII
-  * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX
-@@ -140,6 +141,7 @@ typedef enum {
- 	PHY_INTERFACE_MODE_XGMII,
- 	PHY_INTERFACE_MODE_XLGMII,
- 	PHY_INTERFACE_MODE_MOCA,
-+	PHY_INTERFACE_MODE_PSGMII,
- 	PHY_INTERFACE_MODE_QSGMII,
- 	PHY_INTERFACE_MODE_TRGMII,
- 	PHY_INTERFACE_MODE_100BASEX,
-@@ -247,6 +249,8 @@ static inline const char *phy_modes(phy_
- 		return "xlgmii";
- 	case PHY_INTERFACE_MODE_MOCA:
- 		return "moca";
-+	case PHY_INTERFACE_MODE_PSGMII:
-+		return "psgmii";
- 	case PHY_INTERFACE_MODE_QSGMII:
- 		return "qsgmii";
- 	case PHY_INTERFACE_MODE_TRGMII:
diff --git a/target/linux/generic/backport-6.1/705-v6.4-net-phy-at803x-Replace-of_gpio.h-with-what-indeed-is.patch b/target/linux/generic/backport-6.1/705-v6.4-net-phy-at803x-Replace-of_gpio.h-with-what-indeed-is.patch
deleted file mode 100644
index 7cacb71b1827..000000000000
--- a/target/linux/generic/backport-6.1/705-v6.4-net-phy-at803x-Replace-of_gpio.h-with-what-indeed-is.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From a593a2fcfdfb92cfd0ffc54bc81b07e6bfaaaf46 Mon Sep 17 00:00:00 2001
-From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Date: Thu, 16 Mar 2023 14:08:26 +0200
-Subject: [PATCH] net: phy: at803x: Replace of_gpio.h with what indeed is used
-
-of_gpio.h in this driver is solely used as a proxy to other headers.
-This is incorrect usage of the of_gpio.h. Replace it .h with what
-indeed is used in the code.
-
-Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -13,12 +13,11 @@
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
- #include <linux/ethtool_netlink.h>
--#include <linux/of_gpio.h>
- #include <linux/bitfield.h>
--#include <linux/gpio/consumer.h>
- #include <linux/regulator/of_regulator.h>
- #include <linux/regulator/driver.h>
- #include <linux/regulator/consumer.h>
-+#include <linux/of.h>
- #include <linux/phylink.h>
- #include <linux/sfp.h>
- #include <dt-bindings/net/qca-ar803x.h>
diff --git a/target/linux/generic/backport-6.1/706-v6.6-01-net-phy-at803x-support-qca8081-genphy_c45_pma_read_a.patch b/target/linux/generic/backport-6.1/706-v6.6-01-net-phy-at803x-support-qca8081-genphy_c45_pma_read_a.patch
deleted file mode 100644
index dab492896090..000000000000
--- a/target/linux/generic/backport-6.1/706-v6.6-01-net-phy-at803x-support-qca8081-genphy_c45_pma_read_a.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 8b8bc13d89a7d23d14b0e041c73f037c9db997b1 Mon Sep 17 00:00:00 2001
-From: Luo Jie <quic_luoj@quicinc.com>
-Date: Sun, 16 Jul 2023 16:49:19 +0800
-Subject: [PATCH 1/6] net: phy: at803x: support qca8081
- genphy_c45_pma_read_abilities
-
-qca8081 PHY supports to use genphy_c45_pma_read_abilities for
-getting the PHY features supported except for the autoneg ability
-
-but autoneg ability exists in MDIO_STAT1 instead of MMD7.1, add it
-manually after calling genphy_c45_pma_read_abilities.
-
-Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 28 ++++++++++++++++++----------
- 1 file changed, 18 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -902,15 +902,6 @@ static int at803x_get_features(struct ph
- 	if (err)
- 		return err;
- 
--	if (phydev->drv->phy_id == QCA8081_PHY_ID) {
--		err = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE);
--		if (err < 0)
--			return err;
--
--		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported,
--				err & MDIO_PMA_NG_EXTABLE_2_5GBT);
--	}
--
- 	if (phydev->drv->phy_id != ATH8031_PHY_ID)
- 		return 0;
- 
-@@ -1996,6 +1987,23 @@ static int qca808x_cable_test_get_status
- 	return 0;
- }
- 
-+static int qca808x_get_features(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = genphy_c45_pma_read_abilities(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* The autoneg ability is not existed in bit3 of MMD7.1,
-+	 * but it is supported by qca808x PHY, so we add it here
-+	 * manually.
-+	 */
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
-+
-+	return 0;
-+}
-+
- static struct phy_driver at803x_driver[] = {
- {
- 	/* Qualcomm Atheros AR8035 */
-@@ -2163,7 +2171,7 @@ static struct phy_driver at803x_driver[]
- 	.set_tunable		= at803x_set_tunable,
- 	.set_wol		= at803x_set_wol,
- 	.get_wol		= at803x_get_wol,
--	.get_features		= at803x_get_features,
-+	.get_features		= qca808x_get_features,
- 	.config_aneg		= at803x_config_aneg,
- 	.suspend		= genphy_suspend,
- 	.resume			= genphy_resume,
diff --git a/target/linux/generic/backport-6.1/706-v6.6-02-net-phy-at803x-merge-qca8081-slave-seed-function.patch b/target/linux/generic/backport-6.1/706-v6.6-02-net-phy-at803x-merge-qca8081-slave-seed-function.patch
deleted file mode 100644
index 28874068ce6c..000000000000
--- a/target/linux/generic/backport-6.1/706-v6.6-02-net-phy-at803x-merge-qca8081-slave-seed-function.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From f3db55ae860a82e1224a909072783ef850e5d228 Mon Sep 17 00:00:00 2001
-From: Luo Jie <quic_luoj@quicinc.com>
-Date: Sun, 16 Jul 2023 16:49:20 +0800
-Subject: [PATCH 2/6] net: phy: at803x: merge qca8081 slave seed function
-
-merge the seed enablement and seed value configuration into
-one function, since the random seed value is needed to be
-configured when the seed is enabled.
-
-Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 29 +++++++++--------------------
- 1 file changed, 9 insertions(+), 20 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1730,24 +1730,19 @@ static int qca808x_phy_fast_retrain_conf
- 	return 0;
- }
- 
--static int qca808x_phy_ms_random_seed_set(struct phy_device *phydev)
--{
--	u16 seed_value = prandom_u32_max(QCA808X_MASTER_SLAVE_SEED_RANGE);
--
--	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
--			QCA808X_MASTER_SLAVE_SEED_CFG,
--			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value));
--}
--
- static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
- {
--	u16 seed_enable = 0;
-+	u16 seed_value;
- 
--	if (enable)
--		seed_enable = QCA808X_MASTER_SLAVE_SEED_ENABLE;
-+	if (!enable)
-+		return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
-+				QCA808X_MASTER_SLAVE_SEED_ENABLE, 0);
- 
-+	seed_value = prandom_u32_max(QCA808X_MASTER_SLAVE_SEED_RANGE);
- 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
--			QCA808X_MASTER_SLAVE_SEED_ENABLE, seed_enable);
-+			QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE,
-+			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) |
-+			QCA808X_MASTER_SLAVE_SEED_ENABLE);
- }
- 
- static int qca808x_config_init(struct phy_device *phydev)
-@@ -1771,12 +1766,7 @@ static int qca808x_config_init(struct ph
- 	if (ret)
- 		return ret;
- 
--	/* Configure lower ramdom seed to make phy linked as slave mode */
--	ret = qca808x_phy_ms_random_seed_set(phydev);
--	if (ret)
--		return ret;
--
--	/* Enable seed */
-+	/* Enable seed and configure lower ramdom seed to make phy linked as slave mode */
- 	ret = qca808x_phy_ms_seed_enable(phydev, true);
- 	if (ret)
- 		return ret;
-@@ -1821,7 +1811,6 @@ static int qca808x_read_status(struct ph
- 		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
- 			qca808x_phy_ms_seed_enable(phydev, false);
- 		} else {
--			qca808x_phy_ms_random_seed_set(phydev);
- 			qca808x_phy_ms_seed_enable(phydev, true);
- 		}
- 	}
diff --git a/target/linux/generic/backport-6.1/706-v6.6-03-net-phy-at803x-enable-qca8081-slave-seed-conditional.patch b/target/linux/generic/backport-6.1/706-v6.6-03-net-phy-at803x-enable-qca8081-slave-seed-conditional.patch
deleted file mode 100644
index b91d2cab30e6..000000000000
--- a/target/linux/generic/backport-6.1/706-v6.6-03-net-phy-at803x-enable-qca8081-slave-seed-conditional.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 7cc3209558002d95c0d45a1276ba4f5f741eec42 Mon Sep 17 00:00:00 2001
-From: Luo Jie <quic_luoj@quicinc.com>
-Date: Sun, 16 Jul 2023 16:49:21 +0800
-Subject: [PATCH 3/6] net: phy: at803x: enable qca8081 slave seed conditionally
-
-qca8081 is the single port PHY, the slave prefer mode is used
-by default.
-
-if the phy master perfer mode is configured, the slave seed
-configuration should not be enabled, since the slave seed
-enablement is for making PHY linked as slave mode easily.
-
-disable slave seed if the master mode is preferred.
-
-Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 25 ++++++++++++++++++++-----
- 1 file changed, 20 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1745,6 +1745,12 @@ static int qca808x_phy_ms_seed_enable(st
- 			QCA808X_MASTER_SLAVE_SEED_ENABLE);
- }
- 
-+static bool qca808x_is_prefer_master(struct phy_device *phydev)
-+{
-+	return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) ||
-+		(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
-+}
-+
- static int qca808x_config_init(struct phy_device *phydev)
- {
- 	int ret;
-@@ -1766,11 +1772,17 @@ static int qca808x_config_init(struct ph
- 	if (ret)
- 		return ret;
- 
--	/* Enable seed and configure lower ramdom seed to make phy linked as slave mode */
--	ret = qca808x_phy_ms_seed_enable(phydev, true);
--	if (ret)
-+	ret = genphy_read_master_slave(phydev);
-+	if (ret < 0)
- 		return ret;
- 
-+	if (!qca808x_is_prefer_master(phydev)) {
-+		/* Enable seed and configure lower ramdom seed to make phy linked as slave mode */
-+		ret = qca808x_phy_ms_seed_enable(phydev, true);
-+		if (ret)
-+			return ret;
-+	}
-+
- 	/* Configure adc threshold as 100mv for the link 10M */
- 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
- 			QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
-@@ -1802,13 +1814,16 @@ static int qca808x_read_status(struct ph
- 			phydev->interface = PHY_INTERFACE_MODE_SGMII;
- 	} else {
- 		/* generate seed as a lower random value to make PHY linked as SLAVE easily,
--		 * except for master/slave configuration fault detected.
-+		 * except for master/slave configuration fault detected or the master mode
-+		 * preferred.
-+		 *
- 		 * the reason for not putting this code into the function link_change_notify is
- 		 * the corner case where the link partner is also the qca8081 PHY and the seed
- 		 * value is configured as the same value, the link can't be up and no link change
- 		 * occurs.
- 		 */
--		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
-+		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
-+				qca808x_is_prefer_master(phydev)) {
- 			qca808x_phy_ms_seed_enable(phydev, false);
- 		} else {
- 			qca808x_phy_ms_seed_enable(phydev, true);
diff --git a/target/linux/generic/backport-6.1/706-v6.6-04-net-phy-at803x-support-qca8081-1G-chip-type.patch b/target/linux/generic/backport-6.1/706-v6.6-04-net-phy-at803x-support-qca8081-1G-chip-type.patch
deleted file mode 100644
index b8db89d853c1..000000000000
--- a/target/linux/generic/backport-6.1/706-v6.6-04-net-phy-at803x-support-qca8081-1G-chip-type.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From fea7cfb83d1a2782e39cd101dd44ed2548539de5 Mon Sep 17 00:00:00 2001
-From: Luo Jie <quic_luoj@quicinc.com>
-Date: Sun, 16 Jul 2023 16:49:22 +0800
-Subject: [PATCH 4/6] net: phy: at803x: support qca8081 1G chip type
-
-The qca8081 1G chip version does not support 2.5 capability, which
-is distinguished from qca8081 2.5G chip according to the bit0 of
-register mmd7.0x901d, the 1G version chip also has the same PHY ID
-as the normal qca8081 2.5G chip.
-
-Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -272,6 +272,10 @@
- #define QCA808X_CDT_STATUS_STAT_OPEN		2
- #define QCA808X_CDT_STATUS_STAT_SHORT		3
- 
-+/* QCA808X 1G chip type */
-+#define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
-+#define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
-+
- MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
-@@ -2005,6 +2009,17 @@ static int qca808x_get_features(struct p
- 	 */
- 	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
- 
-+	/* As for the qca8081 1G version chip, the 2500baseT ability is also
-+	 * existed in the bit0 of MMD1.21, we need to remove it manually if
-+	 * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
-+	 */
-+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
-+		linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-6.1/706-v6.6-05-net-phy-at803x-remove-qca8081-1G-fast-retrain-and-sl.patch b/target/linux/generic/backport-6.1/706-v6.6-05-net-phy-at803x-remove-qca8081-1G-fast-retrain-and-sl.patch
deleted file mode 100644
index b54a86e5f50b..000000000000
--- a/target/linux/generic/backport-6.1/706-v6.6-05-net-phy-at803x-remove-qca8081-1G-fast-retrain-and-sl.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From df9401ff3e6eeaa42bfb06761967f1b71f5afce7 Mon Sep 17 00:00:00 2001
-From: Luo Jie <quic_luoj@quicinc.com>
-Date: Sun, 16 Jul 2023 16:49:23 +0800
-Subject: [PATCH 5/6] net: phy: at803x: remove qca8081 1G fast retrain and
- slave seed config
-
-The fast retrain and slave seed configs are only applicable when the 2.5G
-ability is supported.
-
-Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 50 +++++++++++++++++++++++++---------------
- 1 file changed, 32 insertions(+), 18 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1755,6 +1755,11 @@ static bool qca808x_is_prefer_master(str
- 		(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
- }
- 
-+static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
-+{
-+	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
-+}
-+
- static int qca808x_config_init(struct phy_device *phydev)
- {
- 	int ret;
-@@ -1771,20 +1776,24 @@ static int qca808x_config_init(struct ph
- 	if (ret)
- 		return ret;
- 
--	/* Config the fast retrain for the link 2500M */
--	ret = qca808x_phy_fast_retrain_config(phydev);
--	if (ret)
--		return ret;
--
--	ret = genphy_read_master_slave(phydev);
--	if (ret < 0)
--		return ret;
--
--	if (!qca808x_is_prefer_master(phydev)) {
--		/* Enable seed and configure lower ramdom seed to make phy linked as slave mode */
--		ret = qca808x_phy_ms_seed_enable(phydev, true);
-+	if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
-+		/* Config the fast retrain for the link 2500M */
-+		ret = qca808x_phy_fast_retrain_config(phydev);
- 		if (ret)
- 			return ret;
-+
-+		ret = genphy_read_master_slave(phydev);
-+		if (ret < 0)
-+			return ret;
-+
-+		if (!qca808x_is_prefer_master(phydev)) {
-+			/* Enable seed and configure lower ramdom seed to make phy
-+			 * linked as slave mode.
-+			 */
-+			ret = qca808x_phy_ms_seed_enable(phydev, true);
-+			if (ret)
-+				return ret;
-+		}
- 	}
- 
- 	/* Configure adc threshold as 100mv for the link 10M */
-@@ -1826,11 +1835,13 @@ static int qca808x_read_status(struct ph
- 		 * value is configured as the same value, the link can't be up and no link change
- 		 * occurs.
- 		 */
--		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
--				qca808x_is_prefer_master(phydev)) {
--			qca808x_phy_ms_seed_enable(phydev, false);
--		} else {
--			qca808x_phy_ms_seed_enable(phydev, true);
-+		if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
-+			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
-+					qca808x_is_prefer_master(phydev)) {
-+				qca808x_phy_ms_seed_enable(phydev, false);
-+			} else {
-+				qca808x_phy_ms_seed_enable(phydev, true);
-+			}
- 		}
- 	}
- 
-@@ -1845,7 +1856,10 @@ static int qca808x_soft_reset(struct phy
- 	if (ret < 0)
- 		return ret;
- 
--	return qca808x_phy_ms_seed_enable(phydev, true);
-+	if (qca808x_has_fast_retrain_or_slave_seed(phydev))
-+		ret = qca808x_phy_ms_seed_enable(phydev, true);
-+
-+	return ret;
- }
- 
- static bool qca808x_cdt_fault_length_valid(int cdt_code)
diff --git a/target/linux/generic/backport-6.1/706-v6.6-06-net-phy-at803x-add-qca8081-fifo-reset-on-the-link-ch.patch b/target/linux/generic/backport-6.1/706-v6.6-06-net-phy-at803x-add-qca8081-fifo-reset-on-the-link-ch.patch
deleted file mode 100644
index e382cf78762b..000000000000
--- a/target/linux/generic/backport-6.1/706-v6.6-06-net-phy-at803x-add-qca8081-fifo-reset-on-the-link-ch.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 723970affdd8766fa0d91cd34bf2ffc861538b5f Mon Sep 17 00:00:00 2001
-From: Luo Jie <quic_luoj@quicinc.com>
-Date: Sun, 16 Jul 2023 16:49:24 +0800
-Subject: [PATCH 6/6] net: phy: at803x: add qca8081 fifo reset on the link
- changed
-
-The qca8081 sgmii fifo needs to be reset on link down and
-released on the link up in case of any abnormal issue
-such as the packet blocked on the PHY.
-
-Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -276,6 +276,9 @@
- #define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
- #define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
- 
-+#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL	0x9072
-+#define QCA8081_PHY_FIFO_RSTN			BIT(11)
-+
- MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
-@@ -2037,6 +2040,16 @@ static int qca808x_get_features(struct p
- 	return 0;
- }
- 
-+static void qca808x_link_change_notify(struct phy_device *phydev)
-+{
-+	/* Assert interface sgmii fifo on link down, deassert it on link up,
-+	 * the interface device address is always phy address added by 1.
-+	 */
-+	mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
-+			MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
-+			QCA8081_PHY_FIFO_RSTN, phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
-+}
-+
- static struct phy_driver at803x_driver[] = {
- {
- 	/* Qualcomm Atheros AR8035 */
-@@ -2213,6 +2226,7 @@ static struct phy_driver at803x_driver[]
- 	.soft_reset		= qca808x_soft_reset,
- 	.cable_test_start	= qca808x_cable_test_start,
- 	.cable_test_get_status	= qca808x_cable_test_get_status,
-+	.link_change_notify	= qca808x_link_change_notify,
- }, };
- 
- module_phy_driver(at803x_driver);
diff --git a/target/linux/generic/backport-6.1/707-v6.8-02-net-phy-at803x-move-disable-WOL-to-specific-at8031-p.patch b/target/linux/generic/backport-6.1/707-v6.8-02-net-phy-at803x-move-disable-WOL-to-specific-at8031-p.patch
deleted file mode 100644
index eb9172b1cca3..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-02-net-phy-at803x-move-disable-WOL-to-specific-at8031-p.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 6a3b8c573b5a152a6aa7a0b54c5e18b84c6ba6f5 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:49 +0100
-Subject: [PATCH 02/13] net: phy: at803x: move disable WOL to specific at8031
- probe
-
-Move the WOL disable call to specific at8031 probe to make at803x_probe
-more generic and drop extra check for PHY ID.
-
-Keep the same previous behaviour by first calling at803x_probe and then
-disabling WOL.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 27 +++++++++++++++++----------
- 1 file changed, 17 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -886,15 +886,6 @@ static int at803x_probe(struct phy_devic
- 			priv->is_fiber = true;
- 			break;
- 		}
--
--		/* Disable WoL in 1588 register which is enabled
--		 * by default
--		 */
--		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
--				     AT803X_PHY_MMD3_WOL_CTRL,
--				     AT803X_WOL_EN, 0);
--		if (ret)
--			return ret;
- 	}
- 
- 	return 0;
-@@ -1591,6 +1582,22 @@ static int at803x_cable_test_start(struc
- 	return 0;
- }
- 
-+static int at8031_probe(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = at803x_probe(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* Disable WoL in 1588 register which is enabled
-+	 * by default
-+	 */
-+	return phy_modify_mmd(phydev, MDIO_MMD_PCS,
-+			      AT803X_PHY_MMD3_WOL_CTRL,
-+			      AT803X_WOL_EN, 0);
-+}
-+
- static int qca83xx_config_init(struct phy_device *phydev)
- {
- 	u8 switch_revision;
-@@ -2092,7 +2099,7 @@ static struct phy_driver at803x_driver[]
- 	PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
- 	.name			= "Qualcomm Atheros AR8031/AR8033",
- 	.flags			= PHY_POLL_CABLE_TEST,
--	.probe			= at803x_probe,
-+	.probe			= at8031_probe,
- 	.config_init		= at803x_config_init,
- 	.config_aneg		= at803x_config_aneg,
- 	.soft_reset		= genphy_soft_reset,
diff --git a/target/linux/generic/backport-6.1/707-v6.8-03-net-phy-at803x-raname-hw_stats-functions-to-qca83xx-.patch b/target/linux/generic/backport-6.1/707-v6.8-03-net-phy-at803x-raname-hw_stats-functions-to-qca83xx-.patch
deleted file mode 100644
index 5a9d1764f1ba..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-03-net-phy-at803x-raname-hw_stats-functions-to-qca83xx-.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 07b1ad83b9ed6db1735ba10baf67b7a565ac0cef Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:50 +0100
-Subject: [PATCH 03/13] net: phy: at803x: raname hw_stats functions to qca83xx
- specific name
-
-The function and the struct related to hw_stats were specific to qca83xx
-PHY but were called following the convention in the driver of calling
-everything with at803x prefix.
-
-To better organize the code, rename these function a more specific name
-to better describe that they are specific to 83xx PHY family.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 44 ++++++++++++++++++++--------------------
- 1 file changed, 22 insertions(+), 22 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -295,7 +295,7 @@ struct at803x_hw_stat {
- 	enum stat_access_type access_type;
- };
- 
--static struct at803x_hw_stat at803x_hw_stats[] = {
-+static struct at803x_hw_stat qca83xx_hw_stats[] = {
- 	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
- 	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
- 	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
-@@ -311,7 +311,7 @@ struct at803x_priv {
- 	bool is_1000basex;
- 	struct regulator_dev *vddio_rdev;
- 	struct regulator_dev *vddh_rdev;
--	u64 stats[ARRAY_SIZE(at803x_hw_stats)];
-+	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
- };
- 
- struct at803x_context {
-@@ -529,24 +529,24 @@ static void at803x_get_wol(struct phy_de
- 		wol->wolopts |= WAKE_MAGIC;
- }
- 
--static int at803x_get_sset_count(struct phy_device *phydev)
-+static int qca83xx_get_sset_count(struct phy_device *phydev)
- {
--	return ARRAY_SIZE(at803x_hw_stats);
-+	return ARRAY_SIZE(qca83xx_hw_stats);
- }
- 
--static void at803x_get_strings(struct phy_device *phydev, u8 *data)
-+static void qca83xx_get_strings(struct phy_device *phydev, u8 *data)
- {
- 	int i;
- 
--	for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) {
-+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) {
- 		strscpy(data + i * ETH_GSTRING_LEN,
--			at803x_hw_stats[i].string, ETH_GSTRING_LEN);
-+			qca83xx_hw_stats[i].string, ETH_GSTRING_LEN);
- 	}
- }
- 
--static u64 at803x_get_stat(struct phy_device *phydev, int i)
-+static u64 qca83xx_get_stat(struct phy_device *phydev, int i)
- {
--	struct at803x_hw_stat stat = at803x_hw_stats[i];
-+	struct at803x_hw_stat stat = qca83xx_hw_stats[i];
- 	struct at803x_priv *priv = phydev->priv;
- 	int val;
- 	u64 ret;
-@@ -567,13 +567,13 @@ static u64 at803x_get_stat(struct phy_de
- 	return ret;
- }
- 
--static void at803x_get_stats(struct phy_device *phydev,
--			     struct ethtool_stats *stats, u64 *data)
-+static void qca83xx_get_stats(struct phy_device *phydev,
-+			      struct ethtool_stats *stats, u64 *data)
- {
- 	int i;
- 
--	for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++)
--		data[i] = at803x_get_stat(phydev, i);
-+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++)
-+		data[i] = qca83xx_get_stat(phydev, i);
- }
- 
- static int at803x_suspend(struct phy_device *phydev)
-@@ -2175,9 +2175,9 @@ static struct phy_driver at803x_driver[]
- 	.flags			= PHY_IS_INTERNAL,
- 	.config_init		= qca83xx_config_init,
- 	.soft_reset		= genphy_soft_reset,
--	.get_sset_count		= at803x_get_sset_count,
--	.get_strings		= at803x_get_strings,
--	.get_stats		= at803x_get_stats,
-+	.get_sset_count		= qca83xx_get_sset_count,
-+	.get_strings		= qca83xx_get_strings,
-+	.get_stats		= qca83xx_get_stats,
- 	.suspend		= qca83xx_suspend,
- 	.resume			= qca83xx_resume,
- }, {
-@@ -2191,9 +2191,9 @@ static struct phy_driver at803x_driver[]
- 	.flags			= PHY_IS_INTERNAL,
- 	.config_init		= qca83xx_config_init,
- 	.soft_reset		= genphy_soft_reset,
--	.get_sset_count		= at803x_get_sset_count,
--	.get_strings		= at803x_get_strings,
--	.get_stats		= at803x_get_stats,
-+	.get_sset_count		= qca83xx_get_sset_count,
-+	.get_strings		= qca83xx_get_strings,
-+	.get_stats		= qca83xx_get_stats,
- 	.suspend		= qca83xx_suspend,
- 	.resume			= qca83xx_resume,
- }, {
-@@ -2207,9 +2207,9 @@ static struct phy_driver at803x_driver[]
- 	.flags			= PHY_IS_INTERNAL,
- 	.config_init		= qca83xx_config_init,
- 	.soft_reset		= genphy_soft_reset,
--	.get_sset_count		= at803x_get_sset_count,
--	.get_strings		= at803x_get_strings,
--	.get_stats		= at803x_get_stats,
-+	.get_sset_count		= qca83xx_get_sset_count,
-+	.get_strings		= qca83xx_get_strings,
-+	.get_stats		= qca83xx_get_stats,
- 	.suspend		= qca83xx_suspend,
- 	.resume			= qca83xx_resume,
- }, {
diff --git a/target/linux/generic/backport-6.1/707-v6.8-04-net-phy-at803x-move-qca83xx-specific-check-in-dedica.patch b/target/linux/generic/backport-6.1/707-v6.8-04-net-phy-at803x-move-qca83xx-specific-check-in-dedica.patch
deleted file mode 100644
index f09142c5ed44..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-04-net-phy-at803x-move-qca83xx-specific-check-in-dedica.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-From d43cff3f82336c0bd965ea552232d9f4ddac71a6 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:51 +0100
-Subject: [PATCH 04/13] net: phy: at803x: move qca83xx specific check in
- dedicated functions
-
-Rework qca83xx specific check to dedicated function to tidy things up
-and drop useless phy_id check.
-
-Also drop an useless link_change_notify for QCA8337 as it did nothing an
-returned early.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 68 ++++++++++++++++++++++------------------
- 1 file changed, 37 insertions(+), 31 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1623,27 +1623,26 @@ static int qca83xx_config_init(struct ph
- 		break;
- 	}
- 
-+	/* Following original QCA sourcecode set port to prefer master */
-+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
-+
-+	return 0;
-+}
-+
-+static int qca8327_config_init(struct phy_device *phydev)
-+{
- 	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
- 	 * Disable on init and enable only with 100m speed following
- 	 * qca original source code.
- 	 */
--	if (phydev->drv->phy_id == QCA8327_A_PHY_ID ||
--	    phydev->drv->phy_id == QCA8327_B_PHY_ID)
--		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
--				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-+			      QCA8327_DEBUG_MANU_CTRL_EN, 0);
- 
--	/* Following original QCA sourcecode set port to prefer master */
--	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
--
--	return 0;
-+	return qca83xx_config_init(phydev);
- }
- 
- static void qca83xx_link_change_notify(struct phy_device *phydev)
- {
--	/* QCA8337 doesn't require DAC Amplitude adjustement */
--	if (phydev->drv->phy_id == QCA8337_PHY_ID)
--		return;
--
- 	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
- 	if (phydev->state == PHY_RUNNING) {
- 		if (phydev->speed == SPEED_100)
-@@ -1686,19 +1685,6 @@ static int qca83xx_resume(struct phy_dev
- 
- static int qca83xx_suspend(struct phy_device *phydev)
- {
--	u16 mask = 0;
--
--	/* Only QCA8337 support actual suspend.
--	 * QCA8327 cause port unreliability when phy suspend
--	 * is set.
--	 */
--	if (phydev->drv->phy_id == QCA8337_PHY_ID) {
--		genphy_suspend(phydev);
--	} else {
--		mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
--		phy_modify(phydev, MII_BMCR, mask, 0);
--	}
--
- 	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
- 			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
- 
-@@ -1709,6 +1695,27 @@ static int qca83xx_suspend(struct phy_de
- 	return 0;
- }
- 
-+static int qca8337_suspend(struct phy_device *phydev)
-+{
-+	/* Only QCA8337 support actual suspend. */
-+	genphy_suspend(phydev);
-+
-+	return qca83xx_suspend(phydev);
-+}
-+
-+static int qca8327_suspend(struct phy_device *phydev)
-+{
-+	u16 mask = 0;
-+
-+	/* QCA8327 cause port unreliability when phy suspend
-+	 * is set.
-+	 */
-+	mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
-+	phy_modify(phydev, MII_BMCR, mask, 0);
-+
-+	return qca83xx_suspend(phydev);
-+}
-+
- static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
- {
- 	int ret;
-@@ -2170,7 +2177,6 @@ static struct phy_driver at803x_driver[]
- 	.phy_id_mask		= QCA8K_PHY_ID_MASK,
- 	.name			= "Qualcomm Atheros 8337 internal PHY",
- 	/* PHY_GBIT_FEATURES */
--	.link_change_notify	= qca83xx_link_change_notify,
- 	.probe			= at803x_probe,
- 	.flags			= PHY_IS_INTERNAL,
- 	.config_init		= qca83xx_config_init,
-@@ -2178,7 +2184,7 @@ static struct phy_driver at803x_driver[]
- 	.get_sset_count		= qca83xx_get_sset_count,
- 	.get_strings		= qca83xx_get_strings,
- 	.get_stats		= qca83xx_get_stats,
--	.suspend		= qca83xx_suspend,
-+	.suspend		= qca8337_suspend,
- 	.resume			= qca83xx_resume,
- }, {
- 	/* QCA8327-A from switch QCA8327-AL1A */
-@@ -2189,12 +2195,12 @@ static struct phy_driver at803x_driver[]
- 	.link_change_notify	= qca83xx_link_change_notify,
- 	.probe			= at803x_probe,
- 	.flags			= PHY_IS_INTERNAL,
--	.config_init		= qca83xx_config_init,
-+	.config_init		= qca8327_config_init,
- 	.soft_reset		= genphy_soft_reset,
- 	.get_sset_count		= qca83xx_get_sset_count,
- 	.get_strings		= qca83xx_get_strings,
- 	.get_stats		= qca83xx_get_stats,
--	.suspend		= qca83xx_suspend,
-+	.suspend		= qca8327_suspend,
- 	.resume			= qca83xx_resume,
- }, {
- 	/* QCA8327-B from switch QCA8327-BL1A */
-@@ -2205,12 +2211,12 @@ static struct phy_driver at803x_driver[]
- 	.link_change_notify	= qca83xx_link_change_notify,
- 	.probe			= at803x_probe,
- 	.flags			= PHY_IS_INTERNAL,
--	.config_init		= qca83xx_config_init,
-+	.config_init		= qca8327_config_init,
- 	.soft_reset		= genphy_soft_reset,
- 	.get_sset_count		= qca83xx_get_sset_count,
- 	.get_strings		= qca83xx_get_strings,
- 	.get_stats		= qca83xx_get_stats,
--	.suspend		= qca83xx_suspend,
-+	.suspend		= qca8327_suspend,
- 	.resume			= qca83xx_resume,
- }, {
- 	/* Qualcomm QCA8081 */
diff --git a/target/linux/generic/backport-6.1/707-v6.8-05-net-phy-at803x-move-specific-DT-option-for-at8031-to.patch b/target/linux/generic/backport-6.1/707-v6.8-05-net-phy-at803x-move-specific-DT-option-for-at8031-to.patch
deleted file mode 100644
index a5cc67a8c8e1..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-05-net-phy-at803x-move-specific-DT-option-for-at8031-to.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 900eef75cc5018e149c52fe305c9c3fe424c52a7 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:52 +0100
-Subject: [PATCH 05/13] net: phy: at803x: move specific DT option for at8031 to
- specific probe
-
-Move specific DT options for at8031 to specific probe to tidy things up
-and make at803x_parse_dt more generic.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 55 ++++++++++++++++++++++------------------
- 1 file changed, 31 insertions(+), 24 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -825,30 +825,6 @@ static int at803x_parse_dt(struct phy_de
- 		}
- 	}
- 
--	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
--	 * options.
--	 */
--	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
--		if (of_property_read_bool(node, "qca,keep-pll-enabled"))
--			priv->flags |= AT803X_KEEP_PLL_ENABLED;
--
--		ret = at8031_register_regulators(phydev);
--		if (ret < 0)
--			return ret;
--
--		ret = devm_regulator_get_enable_optional(&phydev->mdio.dev,
--							 "vddio");
--		if (ret) {
--			phydev_err(phydev, "failed to get VDDIO regulator\n");
--			return ret;
--		}
--
--		/* Only AR8031/8033 support 1000Base-X for SFP modules */
--		ret = phy_sfp_probe(phydev, &at803x_sfp_ops);
--		if (ret < 0)
--			return ret;
--	}
--
- 	return 0;
- }
- 
-@@ -1582,6 +1558,30 @@ static int at803x_cable_test_start(struc
- 	return 0;
- }
- 
-+static int at8031_parse_dt(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	struct at803x_priv *priv = phydev->priv;
-+	int ret;
-+
-+	if (of_property_read_bool(node, "qca,keep-pll-enabled"))
-+		priv->flags |= AT803X_KEEP_PLL_ENABLED;
-+
-+	ret = at8031_register_regulators(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = devm_regulator_get_enable_optional(&phydev->mdio.dev,
-+						 "vddio");
-+	if (ret) {
-+		phydev_err(phydev, "failed to get VDDIO regulator\n");
-+		return ret;
-+	}
-+
-+	/* Only AR8031/8033 support 1000Base-X for SFP modules */
-+	return phy_sfp_probe(phydev, &at803x_sfp_ops);
-+}
-+
- static int at8031_probe(struct phy_device *phydev)
- {
- 	int ret;
-@@ -1590,6 +1590,13 @@ static int at8031_probe(struct phy_devic
- 	if (ret)
- 		return ret;
- 
-+	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
-+	 * options.
-+	 */
-+	ret = at8031_parse_dt(phydev);
-+	if (ret)
-+		return ret;
-+
- 	/* Disable WoL in 1588 register which is enabled
- 	 * by default
- 	 */
diff --git a/target/linux/generic/backport-6.1/707-v6.8-06-net-phy-at803x-move-specific-at8031-probe-mode-check.patch b/target/linux/generic/backport-6.1/707-v6.8-06-net-phy-at803x-move-specific-at8031-probe-mode-check.patch
deleted file mode 100644
index 9e10e000e5b9..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-06-net-phy-at803x-move-specific-at8031-probe-mode-check.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 25d2ba94005fac18fe68878cddff59a67e115554 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:53 +0100
-Subject: [PATCH 06/13] net: phy: at803x: move specific at8031 probe mode check
- to dedicated probe
-
-Move specific at8031 probe mode check to dedicated probe to make
-at803x_probe more generic and keep code tidy.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 39 +++++++++++++++++++--------------------
- 1 file changed, 19 insertions(+), 20 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -844,26 +844,6 @@ static int at803x_probe(struct phy_devic
- 	if (ret)
- 		return ret;
- 
--	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
--		int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
--		int mode_cfg;
--
--		if (ccr < 0)
--			return ccr;
--		mode_cfg = ccr & AT803X_MODE_CFG_MASK;
--
--		switch (mode_cfg) {
--		case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
--		case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
--			priv->is_1000basex = true;
--			fallthrough;
--		case AT803X_MODE_CFG_FX100_RGMII_50OHM:
--		case AT803X_MODE_CFG_FX100_RGMII_75OHM:
--			priv->is_fiber = true;
--			break;
--		}
--	}
--
- 	return 0;
- }
- 
-@@ -1584,6 +1564,9 @@ static int at8031_parse_dt(struct phy_de
- 
- static int at8031_probe(struct phy_device *phydev)
- {
-+	struct at803x_priv *priv = phydev->priv;
-+	int mode_cfg;
-+	int ccr;
- 	int ret;
- 
- 	ret = at803x_probe(phydev);
-@@ -1597,6 +1580,22 @@ static int at8031_probe(struct phy_devic
- 	if (ret)
- 		return ret;
- 
-+	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+	if (ccr < 0)
-+		return ccr;
-+	mode_cfg = ccr & AT803X_MODE_CFG_MASK;
-+
-+	switch (mode_cfg) {
-+	case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
-+	case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
-+		priv->is_1000basex = true;
-+		fallthrough;
-+	case AT803X_MODE_CFG_FX100_RGMII_50OHM:
-+	case AT803X_MODE_CFG_FX100_RGMII_75OHM:
-+		priv->is_fiber = true;
-+		break;
-+	}
-+
- 	/* Disable WoL in 1588 register which is enabled
- 	 * by default
- 	 */
diff --git a/target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch b/target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch
deleted file mode 100644
index c9ef6df82798..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 3ae3bc426eaf57ca8f53d75777d9a5ef779bc7b7 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:54 +0100
-Subject: [PATCH 07/13] net: phy: at803x: move specific at8031 config_init to
- dedicated function
-
-Move specific at8031 config_init to dedicated function to make
-at803x_config_init more generic and tidy things up.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 45 ++++++++++++++++++++++------------------
- 1 file changed, 25 insertions(+), 20 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -951,27 +951,8 @@ static int at803x_hibernation_mode_confi
- 
- static int at803x_config_init(struct phy_device *phydev)
- {
--	struct at803x_priv *priv = phydev->priv;
- 	int ret;
- 
--	if (phydev->drv->phy_id == ATH8031_PHY_ID) {
--		/* Some bootloaders leave the fiber page selected.
--		 * Switch to the appropriate page (fiber or copper), as otherwise we
--		 * read the PHY capabilities from the wrong page.
--		 */
--		phy_lock_mdio_bus(phydev);
--		ret = at803x_write_page(phydev,
--					priv->is_fiber ? AT803X_PAGE_FIBER :
--							 AT803X_PAGE_COPPER);
--		phy_unlock_mdio_bus(phydev);
--		if (ret)
--			return ret;
--
--		ret = at8031_pll_config(phydev);
--		if (ret < 0)
--			return ret;
--	}
--
- 	/* The RX and TX delay default is:
- 	 *   after HW reset: RX delay enabled and TX delay disabled
- 	 *   after SW reset: RX delay enabled, while TX delay retains the
-@@ -1604,6 +1585,30 @@ static int at8031_probe(struct phy_devic
- 			      AT803X_WOL_EN, 0);
- }
- 
-+static int at8031_config_init(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	int ret;
-+
-+	/* Some bootloaders leave the fiber page selected.
-+	 * Switch to the appropriate page (fiber or copper), as otherwise we
-+	 * read the PHY capabilities from the wrong page.
-+	 */
-+	phy_lock_mdio_bus(phydev);
-+	ret = at803x_write_page(phydev,
-+				priv->is_fiber ? AT803X_PAGE_FIBER :
-+						 AT803X_PAGE_COPPER);
-+	phy_unlock_mdio_bus(phydev);
-+	if (ret)
-+		return ret;
-+
-+	ret = at8031_pll_config(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	return at803x_config_init(phydev);
-+}
-+
- static int qca83xx_config_init(struct phy_device *phydev)
- {
- 	u8 switch_revision;
-@@ -2113,7 +2118,7 @@ static struct phy_driver at803x_driver[]
- 	.name			= "Qualcomm Atheros AR8031/AR8033",
- 	.flags			= PHY_POLL_CABLE_TEST,
- 	.probe			= at8031_probe,
--	.config_init		= at803x_config_init,
-+	.config_init		= at8031_config_init,
- 	.config_aneg		= at803x_config_aneg,
- 	.soft_reset		= genphy_soft_reset,
- 	.set_wol		= at803x_set_wol,
diff --git a/target/linux/generic/backport-6.1/707-v6.8-08-net-phy-at803x-move-specific-at8031-WOL-bits-to-dedi.patch b/target/linux/generic/backport-6.1/707-v6.8-08-net-phy-at803x-move-specific-at8031-WOL-bits-to-dedi.patch
deleted file mode 100644
index 6746a4d43ca8..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-08-net-phy-at803x-move-specific-at8031-WOL-bits-to-dedi.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 27b89c9dc1b0393090d68d651b82f30ad2696baa Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:55 +0100
-Subject: [PATCH 08/13] net: phy: at803x: move specific at8031 WOL bits to
- dedicated function
-
-Move specific at8031 WOL enable/disable to dedicated function to make
-at803x_set_wol more generic.
-
-This is needed in preparation for PHY driver split as qca8081 share the
-same function to toggle WOL settings.
-
-In this new implementation WOL module in at8031 is enabled after the
-generic interrupt is setup. This should not cause any problem as the
-WOL_INT has a separate implementation and only relay on MAC bits.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 42 ++++++++++++++++++++++++----------------
- 1 file changed, 25 insertions(+), 17 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -466,27 +466,11 @@ static int at803x_set_wol(struct phy_dev
- 			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
- 				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
- 
--		/* Enable WOL function for 1588 */
--		if (phydev->drv->phy_id == ATH8031_PHY_ID) {
--			ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
--					     AT803X_PHY_MMD3_WOL_CTRL,
--					     0, AT803X_WOL_EN);
--			if (ret)
--				return ret;
--		}
- 		/* Enable WOL interrupt */
- 		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
- 		if (ret)
- 			return ret;
- 	} else {
--		/* Disable WoL function for 1588 */
--		if (phydev->drv->phy_id == ATH8031_PHY_ID) {
--			ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
--					     AT803X_PHY_MMD3_WOL_CTRL,
--					     AT803X_WOL_EN, 0);
--			if (ret)
--				return ret;
--		}
- 		/* Disable WOL interrupt */
- 		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
- 		if (ret)
-@@ -1609,6 +1593,30 @@ static int at8031_config_init(struct phy
- 	return at803x_config_init(phydev);
- }
- 
-+static int at8031_set_wol(struct phy_device *phydev,
-+			  struct ethtool_wolinfo *wol)
-+{
-+	int ret;
-+
-+	/* First setup MAC address and enable WOL interrupt */
-+	ret = at803x_set_wol(phydev, wol);
-+	if (ret)
-+		return ret;
-+
-+	if (wol->wolopts & WAKE_MAGIC)
-+		/* Enable WOL function for 1588 */
-+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-+				     AT803X_PHY_MMD3_WOL_CTRL,
-+				     0, AT803X_WOL_EN);
-+	else
-+		/* Disable WoL function for 1588 */
-+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-+				     AT803X_PHY_MMD3_WOL_CTRL,
-+				     AT803X_WOL_EN, 0);
-+
-+	return ret;
-+}
-+
- static int qca83xx_config_init(struct phy_device *phydev)
- {
- 	u8 switch_revision;
-@@ -2121,7 +2129,7 @@ static struct phy_driver at803x_driver[]
- 	.config_init		= at8031_config_init,
- 	.config_aneg		= at803x_config_aneg,
- 	.soft_reset		= genphy_soft_reset,
--	.set_wol		= at803x_set_wol,
-+	.set_wol		= at8031_set_wol,
- 	.get_wol		= at803x_get_wol,
- 	.suspend		= at803x_suspend,
- 	.resume			= at803x_resume,
diff --git a/target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch b/target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch
deleted file mode 100644
index 0d284c3d2418..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 30dd62191d3dd97c08f7f9dc9ce77ffab457e4fb Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:56 +0100
-Subject: [PATCH 09/13] net: phy: at803x: move specific at8031 config_intr to
- dedicated function
-
-Move specific at8031 config_intr bits to dedicated function to make
-at803x_config_initr more generic.
-
-This is needed in preparation for PHY driver split as qca8081 share the
-same function to setup interrupts.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 30 ++++++++++++++++++++++++------
- 1 file changed, 24 insertions(+), 6 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -990,7 +990,6 @@ static int at803x_ack_interrupt(struct p
- 
- static int at803x_config_intr(struct phy_device *phydev)
- {
--	struct at803x_priv *priv = phydev->priv;
- 	int err;
- 	int value;
- 
-@@ -1007,10 +1006,6 @@ static int at803x_config_intr(struct phy
- 		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
- 		value |= AT803X_INTR_ENABLE_LINK_FAIL;
- 		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
--		if (priv->is_fiber) {
--			value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
--			value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
--		}
- 
- 		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
- 	} else {
-@@ -1617,6 +1612,29 @@ static int at8031_set_wol(struct phy_dev
- 	return ret;
- }
- 
-+static int at8031_config_intr(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	int err, value = 0;
-+
-+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED &&
-+	    priv->is_fiber) {
-+		/* Clear any pending interrupts */
-+		err = at803x_ack_interrupt(phydev);
-+		if (err)
-+			return err;
-+
-+		value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
-+		value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
-+
-+		err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value);
-+		if (err)
-+			return err;
-+	}
-+
-+	return at803x_config_intr(phydev);
-+}
-+
- static int qca83xx_config_init(struct phy_device *phydev)
- {
- 	u8 switch_revision;
-@@ -2137,7 +2155,7 @@ static struct phy_driver at803x_driver[]
- 	.write_page		= at803x_write_page,
- 	.get_features		= at803x_get_features,
- 	.read_status		= at803x_read_status,
--	.config_intr		= at803x_config_intr,
-+	.config_intr		= at8031_config_intr,
- 	.handle_interrupt	= at803x_handle_interrupt,
- 	.get_tunable		= at803x_get_tunable,
- 	.set_tunable		= at803x_set_tunable,
diff --git a/target/linux/generic/backport-6.1/707-v6.8-10-net-phy-at803x-make-at8031-related-DT-functions-name.patch b/target/linux/generic/backport-6.1/707-v6.8-10-net-phy-at803x-make-at8031-related-DT-functions-name.patch
deleted file mode 100644
index 210949ea81b9..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-10-net-phy-at803x-make-at8031-related-DT-functions-name.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From a5ab9d8e7ae0da8328ac1637a9755311508dc8ab Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:57 +0100
-Subject: [PATCH 10/13] net: phy: at803x: make at8031 related DT functions name
- more specific
-
-Rename at8031 related DT function name to a more specific name
-referencing they are only related to at8031 and not to the generic
-at803x PHY family.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -583,7 +583,7 @@ static int at803x_resume(struct phy_devi
- 	return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
- }
- 
--static int at803x_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev,
-+static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev,
- 					    unsigned int selector)
- {
- 	struct phy_device *phydev = rdev_get_drvdata(rdev);
-@@ -596,7 +596,7 @@ static int at803x_rgmii_reg_set_voltage_
- 					     AT803X_DEBUG_RGMII_1V8, 0);
- }
- 
--static int at803x_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev)
-+static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev)
- {
- 	struct phy_device *phydev = rdev_get_drvdata(rdev);
- 	int val;
-@@ -610,8 +610,8 @@ static int at803x_rgmii_reg_get_voltage_
- 
- static const struct regulator_ops vddio_regulator_ops = {
- 	.list_voltage = regulator_list_voltage_table,
--	.set_voltage_sel = at803x_rgmii_reg_set_voltage_sel,
--	.get_voltage_sel = at803x_rgmii_reg_get_voltage_sel,
-+	.set_voltage_sel = at8031_rgmii_reg_set_voltage_sel,
-+	.get_voltage_sel = at8031_rgmii_reg_get_voltage_sel,
- };
- 
- static const unsigned int vddio_voltage_table[] = {
-@@ -666,7 +666,7 @@ static int at8031_register_regulators(st
- 	return 0;
- }
- 
--static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
- {
- 	struct phy_device *phydev = upstream;
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
-@@ -710,10 +710,10 @@ static int at803x_sfp_insert(void *upstr
- 	return 0;
- }
- 
--static const struct sfp_upstream_ops at803x_sfp_ops = {
-+static const struct sfp_upstream_ops at8031_sfp_ops = {
- 	.attach = phy_sfp_attach,
- 	.detach = phy_sfp_detach,
--	.module_insert = at803x_sfp_insert,
-+	.module_insert = at8031_sfp_insert,
- };
- 
- static int at803x_parse_dt(struct phy_device *phydev)
-@@ -1519,7 +1519,7 @@ static int at8031_parse_dt(struct phy_de
- 	}
- 
- 	/* Only AR8031/8033 support 1000Base-X for SFP modules */
--	return phy_sfp_probe(phydev, &at803x_sfp_ops);
-+	return phy_sfp_probe(phydev, &at8031_sfp_ops);
- }
- 
- static int at8031_probe(struct phy_device *phydev)
diff --git a/target/linux/generic/backport-6.1/707-v6.8-11-net-phy-at803x-move-at8031-functions-in-dedicated-se.patch b/target/linux/generic/backport-6.1/707-v6.8-11-net-phy-at803x-move-at8031-functions-in-dedicated-se.patch
deleted file mode 100644
index 5856b5975118..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-11-net-phy-at803x-move-at8031-functions-in-dedicated-se.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-From f932a6dc8bae0dae9645b5b1b4c65aed8a8acb2a Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:58 +0100
-Subject: [PATCH 11/13] net: phy: at803x: move at8031 functions in dedicated
- section
-
-Move at8031 functions in dedicated section with dedicated at8031
-parse_dt and probe.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 266 +++++++++++++++++++--------------------
- 1 file changed, 133 insertions(+), 133 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -583,139 +583,6 @@ static int at803x_resume(struct phy_devi
- 	return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
- }
- 
--static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev,
--					    unsigned int selector)
--{
--	struct phy_device *phydev = rdev_get_drvdata(rdev);
--
--	if (selector)
--		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
--					     0, AT803X_DEBUG_RGMII_1V8);
--	else
--		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
--					     AT803X_DEBUG_RGMII_1V8, 0);
--}
--
--static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev)
--{
--	struct phy_device *phydev = rdev_get_drvdata(rdev);
--	int val;
--
--	val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F);
--	if (val < 0)
--		return val;
--
--	return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0;
--}
--
--static const struct regulator_ops vddio_regulator_ops = {
--	.list_voltage = regulator_list_voltage_table,
--	.set_voltage_sel = at8031_rgmii_reg_set_voltage_sel,
--	.get_voltage_sel = at8031_rgmii_reg_get_voltage_sel,
--};
--
--static const unsigned int vddio_voltage_table[] = {
--	1500000,
--	1800000,
--};
--
--static const struct regulator_desc vddio_desc = {
--	.name = "vddio",
--	.of_match = of_match_ptr("vddio-regulator"),
--	.n_voltages = ARRAY_SIZE(vddio_voltage_table),
--	.volt_table = vddio_voltage_table,
--	.ops = &vddio_regulator_ops,
--	.type = REGULATOR_VOLTAGE,
--	.owner = THIS_MODULE,
--};
--
--static const struct regulator_ops vddh_regulator_ops = {
--};
--
--static const struct regulator_desc vddh_desc = {
--	.name = "vddh",
--	.of_match = of_match_ptr("vddh-regulator"),
--	.n_voltages = 1,
--	.fixed_uV = 2500000,
--	.ops = &vddh_regulator_ops,
--	.type = REGULATOR_VOLTAGE,
--	.owner = THIS_MODULE,
--};
--
--static int at8031_register_regulators(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--	struct device *dev = &phydev->mdio.dev;
--	struct regulator_config config = { };
--
--	config.dev = dev;
--	config.driver_data = phydev;
--
--	priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config);
--	if (IS_ERR(priv->vddio_rdev)) {
--		phydev_err(phydev, "failed to register VDDIO regulator\n");
--		return PTR_ERR(priv->vddio_rdev);
--	}
--
--	priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config);
--	if (IS_ERR(priv->vddh_rdev)) {
--		phydev_err(phydev, "failed to register VDDH regulator\n");
--		return PTR_ERR(priv->vddh_rdev);
--	}
--
--	return 0;
--}
--
--static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
--{
--	struct phy_device *phydev = upstream;
--	__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
--	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
--	DECLARE_PHY_INTERFACE_MASK(interfaces);
--	phy_interface_t iface;
--
--	linkmode_zero(phy_support);
--	phylink_set(phy_support, 1000baseX_Full);
--	phylink_set(phy_support, 1000baseT_Full);
--	phylink_set(phy_support, Autoneg);
--	phylink_set(phy_support, Pause);
--	phylink_set(phy_support, Asym_Pause);
--
--	linkmode_zero(sfp_support);
--	sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces);
--	/* Some modules support 10G modes as well as others we support.
--	 * Mask out non-supported modes so the correct interface is picked.
--	 */
--	linkmode_and(sfp_support, phy_support, sfp_support);
--
--	if (linkmode_empty(sfp_support)) {
--		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
--		return -EINVAL;
--	}
--
--	iface = sfp_select_interface(phydev->sfp_bus, sfp_support);
--
--	/* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes
--	 * interface for use with SFP modules.
--	 * However, some copper modules detected as having a preferred SGMII
--	 * interface do default to and function in 1000Base-X mode, so just
--	 * print a warning and allow such modules, as they may have some chance
--	 * of working.
--	 */
--	if (iface == PHY_INTERFACE_MODE_SGMII)
--		dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n");
--	else if (iface != PHY_INTERFACE_MODE_1000BASEX)
--		return -EINVAL;
--
--	return 0;
--}
--
--static const struct sfp_upstream_ops at8031_sfp_ops = {
--	.attach = phy_sfp_attach,
--	.detach = phy_sfp_detach,
--	.module_insert = at8031_sfp_insert,
--};
--
- static int at803x_parse_dt(struct phy_device *phydev)
- {
- 	struct device_node *node = phydev->mdio.dev.of_node;
-@@ -1498,6 +1365,139 @@ static int at803x_cable_test_start(struc
- 	return 0;
- }
- 
-+static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev,
-+					    unsigned int selector)
-+{
-+	struct phy_device *phydev = rdev_get_drvdata(rdev);
-+
-+	if (selector)
-+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-+					     0, AT803X_DEBUG_RGMII_1V8);
-+	else
-+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-+					     AT803X_DEBUG_RGMII_1V8, 0);
-+}
-+
-+static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev)
-+{
-+	struct phy_device *phydev = rdev_get_drvdata(rdev);
-+	int val;
-+
-+	val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F);
-+	if (val < 0)
-+		return val;
-+
-+	return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0;
-+}
-+
-+static const struct regulator_ops vddio_regulator_ops = {
-+	.list_voltage = regulator_list_voltage_table,
-+	.set_voltage_sel = at8031_rgmii_reg_set_voltage_sel,
-+	.get_voltage_sel = at8031_rgmii_reg_get_voltage_sel,
-+};
-+
-+static const unsigned int vddio_voltage_table[] = {
-+	1500000,
-+	1800000,
-+};
-+
-+static const struct regulator_desc vddio_desc = {
-+	.name = "vddio",
-+	.of_match = of_match_ptr("vddio-regulator"),
-+	.n_voltages = ARRAY_SIZE(vddio_voltage_table),
-+	.volt_table = vddio_voltage_table,
-+	.ops = &vddio_regulator_ops,
-+	.type = REGULATOR_VOLTAGE,
-+	.owner = THIS_MODULE,
-+};
-+
-+static const struct regulator_ops vddh_regulator_ops = {
-+};
-+
-+static const struct regulator_desc vddh_desc = {
-+	.name = "vddh",
-+	.of_match = of_match_ptr("vddh-regulator"),
-+	.n_voltages = 1,
-+	.fixed_uV = 2500000,
-+	.ops = &vddh_regulator_ops,
-+	.type = REGULATOR_VOLTAGE,
-+	.owner = THIS_MODULE,
-+};
-+
-+static int at8031_register_regulators(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	struct device *dev = &phydev->mdio.dev;
-+	struct regulator_config config = { };
-+
-+	config.dev = dev;
-+	config.driver_data = phydev;
-+
-+	priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config);
-+	if (IS_ERR(priv->vddio_rdev)) {
-+		phydev_err(phydev, "failed to register VDDIO regulator\n");
-+		return PTR_ERR(priv->vddio_rdev);
-+	}
-+
-+	priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config);
-+	if (IS_ERR(priv->vddh_rdev)) {
-+		phydev_err(phydev, "failed to register VDDH regulator\n");
-+		return PTR_ERR(priv->vddh_rdev);
-+	}
-+
-+	return 0;
-+}
-+
-+static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+	struct phy_device *phydev = upstream;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
-+	DECLARE_PHY_INTERFACE_MASK(interfaces);
-+	phy_interface_t iface;
-+
-+	linkmode_zero(phy_support);
-+	phylink_set(phy_support, 1000baseX_Full);
-+	phylink_set(phy_support, 1000baseT_Full);
-+	phylink_set(phy_support, Autoneg);
-+	phylink_set(phy_support, Pause);
-+	phylink_set(phy_support, Asym_Pause);
-+
-+	linkmode_zero(sfp_support);
-+	sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces);
-+	/* Some modules support 10G modes as well as others we support.
-+	 * Mask out non-supported modes so the correct interface is picked.
-+	 */
-+	linkmode_and(sfp_support, phy_support, sfp_support);
-+
-+	if (linkmode_empty(sfp_support)) {
-+		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-+		return -EINVAL;
-+	}
-+
-+	iface = sfp_select_interface(phydev->sfp_bus, sfp_support);
-+
-+	/* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes
-+	 * interface for use with SFP modules.
-+	 * However, some copper modules detected as having a preferred SGMII
-+	 * interface do default to and function in 1000Base-X mode, so just
-+	 * print a warning and allow such modules, as they may have some chance
-+	 * of working.
-+	 */
-+	if (iface == PHY_INTERFACE_MODE_SGMII)
-+		dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n");
-+	else if (iface != PHY_INTERFACE_MODE_1000BASEX)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static const struct sfp_upstream_ops at8031_sfp_ops = {
-+	.attach = phy_sfp_attach,
-+	.detach = phy_sfp_detach,
-+	.module_insert = at8031_sfp_insert,
-+};
-+
- static int at8031_parse_dt(struct phy_device *phydev)
- {
- 	struct device_node *node = phydev->mdio.dev.of_node;
diff --git a/target/linux/generic/backport-6.1/707-v6.8-12-net-phy-at803x-move-at8035-specific-DT-parse-to-dedi.patch b/target/linux/generic/backport-6.1/707-v6.8-12-net-phy-at803x-move-at8035-specific-DT-parse-to-dedi.patch
deleted file mode 100644
index 0a822c6d3719..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-12-net-phy-at803x-move-at8035-specific-DT-parse-to-dedi.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From 21a2802a8365cfa82cc02187c1f95136d85592ad Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:51:59 +0100
-Subject: [PATCH 12/13] net: phy: at803x: move at8035 specific DT parse to
- dedicated probe
-
-Move at8035 specific DT parse for clock out frequency to dedicated probe
-to make at803x probe function more generic.
-
-This is to tidy code and no behaviour change are intended.
-
-Detection logic is changed, we check if the clk 25m mask is set and if
-it's not zero, we assume the qca,clk-out-frequency property is set.
-
-The property is checked in the generic at803x_parse_dt called by
-at803x_probe.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 60 +++++++++++++++++++++++++++-------------
- 1 file changed, 41 insertions(+), 19 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -638,23 +638,6 @@ static int at803x_parse_dt(struct phy_de
- 
- 		priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel);
- 		priv->clk_25m_mask |= AT803X_CLK_OUT_MASK;
--
--		/* Fixup for the AR8030/AR8035. This chip has another mask and
--		 * doesn't support the DSP reference. Eg. the lowest bit of the
--		 * mask. The upper two bits select the same frequencies. Mask
--		 * the lowest bit here.
--		 *
--		 * Warning:
--		 *   There was no datasheet for the AR8030 available so this is
--		 *   just a guess. But the AR8035 is listed as pin compatible
--		 *   to the AR8030 so there might be a good chance it works on
--		 *   the AR8030 too.
--		 */
--		if (phydev->drv->phy_id == ATH8030_PHY_ID ||
--		    phydev->drv->phy_id == ATH8035_PHY_ID) {
--			priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
--			priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
--		}
- 	}
- 
- 	ret = of_property_read_u32(node, "qca,clk-out-strength", &strength);
-@@ -1635,6 +1618,45 @@ static int at8031_config_intr(struct phy
- 	return at803x_config_intr(phydev);
- }
- 
-+static int at8035_parse_dt(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+
-+	/* Mask is set by the generic at803x_parse_dt
-+	 * if property is set. Assume property is set
-+	 * with the mask not zero.
-+	 */
-+	if (priv->clk_25m_mask) {
-+		/* Fixup for the AR8030/AR8035. This chip has another mask and
-+		 * doesn't support the DSP reference. Eg. the lowest bit of the
-+		 * mask. The upper two bits select the same frequencies. Mask
-+		 * the lowest bit here.
-+		 *
-+		 * Warning:
-+		 *   There was no datasheet for the AR8030 available so this is
-+		 *   just a guess. But the AR8035 is listed as pin compatible
-+		 *   to the AR8030 so there might be a good chance it works on
-+		 *   the AR8030 too.
-+		 */
-+		priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
-+		priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
-+	}
-+
-+	return 0;
-+}
-+
-+/* AR8030 and AR8035 shared the same special mask for clk_25m */
-+static int at8035_probe(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = at803x_probe(phydev);
-+	if (ret)
-+		return ret;
-+
-+	return at8035_parse_dt(phydev);
-+}
-+
- static int qca83xx_config_init(struct phy_device *phydev)
- {
- 	u8 switch_revision;
-@@ -2107,7 +2129,7 @@ static struct phy_driver at803x_driver[]
- 	PHY_ID_MATCH_EXACT(ATH8035_PHY_ID),
- 	.name			= "Qualcomm Atheros AR8035",
- 	.flags			= PHY_POLL_CABLE_TEST,
--	.probe			= at803x_probe,
-+	.probe			= at8035_probe,
- 	.config_aneg		= at803x_config_aneg,
- 	.config_init		= at803x_config_init,
- 	.soft_reset		= genphy_soft_reset,
-@@ -2128,7 +2150,7 @@ static struct phy_driver at803x_driver[]
- 	.phy_id			= ATH8030_PHY_ID,
- 	.name			= "Qualcomm Atheros AR8030",
- 	.phy_id_mask		= AT8030_PHY_ID_MASK,
--	.probe			= at803x_probe,
-+	.probe			= at8035_probe,
- 	.config_init		= at803x_config_init,
- 	.link_change_notify	= at803x_link_change_notify,
- 	.set_wol		= at803x_set_wol,
diff --git a/target/linux/generic/backport-6.1/707-v6.8-13-net-phy-at803x-drop-specific-PHY-ID-check-from-cable.patch b/target/linux/generic/backport-6.1/707-v6.8-13-net-phy-at803x-drop-specific-PHY-ID-check-from-cable.patch
deleted file mode 100644
index e1ba6ec2d0f2..000000000000
--- a/target/linux/generic/backport-6.1/707-v6.8-13-net-phy-at803x-drop-specific-PHY-ID-check-from-cable.patch
+++ /dev/null
@@ -1,219 +0,0 @@
-From ef9df47b449e32e06501a11272809be49019bdb6 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 8 Dec 2023 15:52:00 +0100
-Subject: [PATCH 13/13] net: phy: at803x: drop specific PHY ID check from cable
- test functions
-
-Drop specific PHY ID check for cable test functions for at803x. This is
-done to make functions more generic. While at it better describe what
-the functions does by using more symbolic function names.
-
-PHYs that requires to set additional reg are moved to specific function
-calling the more generic one.
-
-cdt_start and cdt_wait_for_completion are changed to take an additional
-arg to pass specific values specific to the PHY.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 95 +++++++++++++++++++++-------------------
- 1 file changed, 50 insertions(+), 45 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1222,31 +1222,16 @@ static int at803x_cdt_fault_length(u16 s
- 	return (dt * 824) / 10;
- }
- 
--static int at803x_cdt_start(struct phy_device *phydev, int pair)
-+static int at803x_cdt_start(struct phy_device *phydev,
-+			    u32 cdt_start)
- {
--	u16 cdt;
--
--	/* qca8081 takes the different bit 15 to enable CDT test */
--	if (phydev->drv->phy_id == QCA8081_PHY_ID)
--		cdt = QCA808X_CDT_ENABLE_TEST |
--			QCA808X_CDT_LENGTH_UNIT |
--			QCA808X_CDT_INTER_CHECK_DIS;
--	else
--		cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
--			AT803X_CDT_ENABLE_TEST;
--
--	return phy_write(phydev, AT803X_CDT, cdt);
-+	return phy_write(phydev, AT803X_CDT, cdt_start);
- }
- 
--static int at803x_cdt_wait_for_completion(struct phy_device *phydev)
-+static int at803x_cdt_wait_for_completion(struct phy_device *phydev,
-+					  u32 cdt_en)
- {
- 	int val, ret;
--	u16 cdt_en;
--
--	if (phydev->drv->phy_id == QCA8081_PHY_ID)
--		cdt_en = QCA808X_CDT_ENABLE_TEST;
--	else
--		cdt_en = AT803X_CDT_ENABLE_TEST;
- 
- 	/* One test run takes about 25ms */
- 	ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
-@@ -1266,11 +1251,13 @@ static int at803x_cable_test_one_pair(st
- 	};
- 	int ret, val;
- 
--	ret = at803x_cdt_start(phydev, pair);
-+	val = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
-+	      AT803X_CDT_ENABLE_TEST;
-+	ret = at803x_cdt_start(phydev, val);
- 	if (ret)
- 		return ret;
- 
--	ret = at803x_cdt_wait_for_completion(phydev);
-+	ret = at803x_cdt_wait_for_completion(phydev, AT803X_CDT_ENABLE_TEST);
- 	if (ret)
- 		return ret;
- 
-@@ -1292,19 +1279,11 @@ static int at803x_cable_test_one_pair(st
- }
- 
- static int at803x_cable_test_get_status(struct phy_device *phydev,
--					bool *finished)
-+					bool *finished, unsigned long pair_mask)
- {
--	unsigned long pair_mask;
- 	int retries = 20;
- 	int pair, ret;
- 
--	if (phydev->phy_id == ATH9331_PHY_ID ||
--	    phydev->phy_id == ATH8032_PHY_ID ||
--	    phydev->phy_id == QCA9561_PHY_ID)
--		pair_mask = 0x3;
--	else
--		pair_mask = 0xf;
--
- 	*finished = false;
- 
- 	/* According to the datasheet the CDT can be performed when
-@@ -1331,7 +1310,7 @@ static int at803x_cable_test_get_status(
- 	return 0;
- }
- 
--static int at803x_cable_test_start(struct phy_device *phydev)
-+static void at803x_cable_test_autoneg(struct phy_device *phydev)
- {
- 	/* Enable auto-negotiation, but advertise no capabilities, no link
- 	 * will be established. A restart of the auto-negotiation is not
-@@ -1339,11 +1318,11 @@ static int at803x_cable_test_start(struc
- 	 */
- 	phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
- 	phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
--	if (phydev->phy_id != ATH9331_PHY_ID &&
--	    phydev->phy_id != ATH8032_PHY_ID &&
--	    phydev->phy_id != QCA9561_PHY_ID)
--		phy_write(phydev, MII_CTRL1000, 0);
-+}
- 
-+static int at803x_cable_test_start(struct phy_device *phydev)
-+{
-+	at803x_cable_test_autoneg(phydev);
- 	/* we do all the (time consuming) work later */
- 	return 0;
- }
-@@ -1618,6 +1597,29 @@ static int at8031_config_intr(struct phy
- 	return at803x_config_intr(phydev);
- }
- 
-+/* AR8031 and AR8035 share the same cable test get status reg */
-+static int at8031_cable_test_get_status(struct phy_device *phydev,
-+					bool *finished)
-+{
-+	return at803x_cable_test_get_status(phydev, finished, 0xf);
-+}
-+
-+/* AR8031 and AR8035 share the same cable test start logic */
-+static int at8031_cable_test_start(struct phy_device *phydev)
-+{
-+	at803x_cable_test_autoneg(phydev);
-+	phy_write(phydev, MII_CTRL1000, 0);
-+	/* we do all the (time consuming) work later */
-+	return 0;
-+}
-+
-+/* AR8032, AR9331 and QCA9561 share the same cable test get status reg */
-+static int at8032_cable_test_get_status(struct phy_device *phydev,
-+					bool *finished)
-+{
-+	return at803x_cable_test_get_status(phydev, finished, 0x3);
-+}
-+
- static int at8035_parse_dt(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
-@@ -2041,11 +2043,14 @@ static int qca808x_cable_test_get_status
- 
- 	*finished = false;
- 
--	ret = at803x_cdt_start(phydev, 0);
-+	val = QCA808X_CDT_ENABLE_TEST |
-+	      QCA808X_CDT_LENGTH_UNIT |
-+	      QCA808X_CDT_INTER_CHECK_DIS;
-+	ret = at803x_cdt_start(phydev, val);
- 	if (ret)
- 		return ret;
- 
--	ret = at803x_cdt_wait_for_completion(phydev);
-+	ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
- 	if (ret)
- 		return ret;
- 
-@@ -2143,8 +2148,8 @@ static struct phy_driver at803x_driver[]
- 	.handle_interrupt	= at803x_handle_interrupt,
- 	.get_tunable		= at803x_get_tunable,
- 	.set_tunable		= at803x_set_tunable,
--	.cable_test_start	= at803x_cable_test_start,
--	.cable_test_get_status	= at803x_cable_test_get_status,
-+	.cable_test_start	= at8031_cable_test_start,
-+	.cable_test_get_status	= at8031_cable_test_get_status,
- }, {
- 	/* Qualcomm Atheros AR8030 */
- 	.phy_id			= ATH8030_PHY_ID,
-@@ -2181,8 +2186,8 @@ static struct phy_driver at803x_driver[]
- 	.handle_interrupt	= at803x_handle_interrupt,
- 	.get_tunable		= at803x_get_tunable,
- 	.set_tunable		= at803x_set_tunable,
--	.cable_test_start	= at803x_cable_test_start,
--	.cable_test_get_status	= at803x_cable_test_get_status,
-+	.cable_test_start	= at8031_cable_test_start,
-+	.cable_test_get_status	= at8031_cable_test_get_status,
- }, {
- 	/* Qualcomm Atheros AR8032 */
- 	PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
-@@ -2197,7 +2202,7 @@ static struct phy_driver at803x_driver[]
- 	.config_intr		= at803x_config_intr,
- 	.handle_interrupt	= at803x_handle_interrupt,
- 	.cable_test_start	= at803x_cable_test_start,
--	.cable_test_get_status	= at803x_cable_test_get_status,
-+	.cable_test_get_status	= at8032_cable_test_get_status,
- }, {
- 	/* ATHEROS AR9331 */
- 	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
-@@ -2210,7 +2215,7 @@ static struct phy_driver at803x_driver[]
- 	.config_intr		= at803x_config_intr,
- 	.handle_interrupt	= at803x_handle_interrupt,
- 	.cable_test_start	= at803x_cable_test_start,
--	.cable_test_get_status	= at803x_cable_test_get_status,
-+	.cable_test_get_status	= at8032_cable_test_get_status,
- 	.read_status		= at803x_read_status,
- 	.soft_reset		= genphy_soft_reset,
- 	.config_aneg		= at803x_config_aneg,
-@@ -2226,7 +2231,7 @@ static struct phy_driver at803x_driver[]
- 	.config_intr		= at803x_config_intr,
- 	.handle_interrupt	= at803x_handle_interrupt,
- 	.cable_test_start	= at803x_cable_test_start,
--	.cable_test_get_status	= at803x_cable_test_get_status,
-+	.cable_test_get_status	= at8032_cable_test_get_status,
- 	.read_status		= at803x_read_status,
- 	.soft_reset		= genphy_soft_reset,
- 	.config_aneg		= at803x_config_aneg,
diff --git a/target/linux/generic/backport-6.1/708-v6.8-01-net-phy-at803x-move-specific-qca808x-config_aneg-to-.patch b/target/linux/generic/backport-6.1/708-v6.8-01-net-phy-at803x-move-specific-qca808x-config_aneg-to-.patch
deleted file mode 100644
index 0bb3673c02c1..000000000000
--- a/target/linux/generic/backport-6.1/708-v6.8-01-net-phy-at803x-move-specific-qca808x-config_aneg-to-.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From 8e732f1c6f2dc5e18f766d0f1b11df9db2dd044a Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 14 Dec 2023 01:44:31 +0100
-Subject: [PATCH 1/2] net: phy: at803x: move specific qca808x config_aneg to
- dedicated function
-
-Move specific qca808x config_aneg to dedicated function to permit easier
-split of qca808x portion from at803x driver.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 66 ++++++++++++++++++++++++----------------
- 1 file changed, 40 insertions(+), 26 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1045,9 +1045,8 @@ static int at803x_config_mdix(struct phy
- 			  FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val));
- }
- 
--static int at803x_config_aneg(struct phy_device *phydev)
-+static int at803x_prepare_config_aneg(struct phy_device *phydev)
- {
--	struct at803x_priv *priv = phydev->priv;
- 	int ret;
- 
- 	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
-@@ -1064,33 +1063,22 @@ static int at803x_config_aneg(struct phy
- 			return ret;
- 	}
- 
--	if (priv->is_1000basex)
--		return genphy_c37_config_aneg(phydev);
--
--	/* Do not restart auto-negotiation by setting ret to 0 defautly,
--	 * when calling __genphy_config_aneg later.
--	 */
--	ret = 0;
--
--	if (phydev->drv->phy_id == QCA8081_PHY_ID) {
--		int phy_ctrl = 0;
-+	return 0;
-+}
- 
--		/* The reg MII_BMCR also needs to be configured for force mode, the
--		 * genphy_config_aneg is also needed.
--		 */
--		if (phydev->autoneg == AUTONEG_DISABLE)
--			genphy_c45_pma_setup_forced(phydev);
-+static int at803x_config_aneg(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	int ret;
- 
--		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
--			phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
-+	ret = at803x_prepare_config_aneg(phydev);
-+	if (ret)
-+		return ret;
- 
--		ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
--				MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
--		if (ret < 0)
--			return ret;
--	}
-+	if (priv->is_1000basex)
-+		return genphy_c37_config_aneg(phydev);
- 
--	return __genphy_config_aneg(phydev, ret);
-+	return genphy_config_aneg(phydev);
- }
- 
- static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
-@@ -2118,6 +2106,32 @@ static int qca808x_get_features(struct p
- 	return 0;
- }
- 
-+static int qca808x_config_aneg(struct phy_device *phydev)
-+{
-+	int phy_ctrl = 0;
-+	int ret;
-+
-+	ret = at803x_prepare_config_aneg(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* The reg MII_BMCR also needs to be configured for force mode, the
-+	 * genphy_config_aneg is also needed.
-+	 */
-+	if (phydev->autoneg == AUTONEG_DISABLE)
-+		genphy_c45_pma_setup_forced(phydev);
-+
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
-+		phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
-+
-+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-+				     MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
-+	if (ret < 0)
-+		return ret;
-+
-+	return __genphy_config_aneg(phydev, ret);
-+}
-+
- static void qca808x_link_change_notify(struct phy_device *phydev)
- {
- 	/* Assert interface sgmii fifo on link down, deassert it on link up,
-@@ -2295,7 +2309,7 @@ static struct phy_driver at803x_driver[]
- 	.set_wol		= at803x_set_wol,
- 	.get_wol		= at803x_get_wol,
- 	.get_features		= qca808x_get_features,
--	.config_aneg		= at803x_config_aneg,
-+	.config_aneg		= qca808x_config_aneg,
- 	.suspend		= genphy_suspend,
- 	.resume			= genphy_resume,
- 	.read_status		= qca808x_read_status,
diff --git a/target/linux/generic/backport-6.1/708-v6.8-02-net-phy-at803x-make-read-specific-status-function-mo.patch b/target/linux/generic/backport-6.1/708-v6.8-02-net-phy-at803x-make-read-specific-status-function-mo.patch
deleted file mode 100644
index 54ca3bdfc825..000000000000
--- a/target/linux/generic/backport-6.1/708-v6.8-02-net-phy-at803x-make-read-specific-status-function-mo.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 38eb804e8458ba181a03a0498ce4bf84eebd1931 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 14 Dec 2023 01:44:32 +0100
-Subject: [PATCH 2/2] net: phy: at803x: make read specific status function more
- generic
-
-Rework read specific status function to be more generic. The function
-apply different speed mask based on the PHY ID. Make it more generic by
-adding an additional arg to pass the specific speed (ss) mask and use
-the provided mask to parse the speed value.
-
-This is needed to permit an easier deatch of qca808x code from the
-at803x driver.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 26 ++++++++++++++++++--------
- 1 file changed, 18 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -301,6 +301,11 @@ static struct at803x_hw_stat qca83xx_hw_
- 	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
- };
- 
-+struct at803x_ss_mask {
-+	u16 speed_mask;
-+	u8 speed_shift;
-+};
-+
- struct at803x_priv {
- 	int flags;
- 	u16 clk_25m_reg;
-@@ -921,7 +926,8 @@ static void at803x_link_change_notify(st
- 	}
- }
- 
--static int at803x_read_specific_status(struct phy_device *phydev)
-+static int at803x_read_specific_status(struct phy_device *phydev,
-+				       struct at803x_ss_mask ss_mask)
- {
- 	int ss;
- 
-@@ -940,11 +946,8 @@ static int at803x_read_specific_status(s
- 		if (sfc < 0)
- 			return sfc;
- 
--		/* qca8081 takes the different bits for speed value from at803x */
--		if (phydev->drv->phy_id == QCA8081_PHY_ID)
--			speed = FIELD_GET(QCA808X_SS_SPEED_MASK, ss);
--		else
--			speed = FIELD_GET(AT803X_SS_SPEED_MASK, ss);
-+		speed = ss & ss_mask.speed_mask;
-+		speed >>= ss_mask.speed_shift;
- 
- 		switch (speed) {
- 		case AT803X_SS_SPEED_10:
-@@ -989,6 +992,7 @@ static int at803x_read_specific_status(s
- static int at803x_read_status(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
-+	struct at803x_ss_mask ss_mask = { 0 };
- 	int err, old_link = phydev->link;
- 
- 	if (priv->is_1000basex)
-@@ -1012,7 +1016,9 @@ static int at803x_read_status(struct phy
- 	if (err < 0)
- 		return err;
- 
--	err = at803x_read_specific_status(phydev);
-+	ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
-+	ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
-+	err = at803x_read_specific_status(phydev, ss_mask);
- 	if (err < 0)
- 		return err;
- 
-@@ -1869,6 +1875,7 @@ static int qca808x_config_init(struct ph
- 
- static int qca808x_read_status(struct phy_device *phydev)
- {
-+	struct at803x_ss_mask ss_mask = { 0 };
- 	int ret;
- 
- 	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
-@@ -1882,7 +1889,10 @@ static int qca808x_read_status(struct ph
- 	if (ret)
- 		return ret;
- 
--	ret = at803x_read_specific_status(phydev);
-+	/* qca8081 takes the different bits for speed value from at803x */
-+	ss_mask.speed_mask = QCA808X_SS_SPEED_MASK;
-+	ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK);
-+	ret = at803x_read_specific_status(phydev, ss_mask);
- 	if (ret < 0)
- 		return ret;
- 
diff --git a/target/linux/generic/backport-6.1/709-v6.8-01-net-phy-at803x-remove-extra-space-after-cast.patch b/target/linux/generic/backport-6.1/709-v6.8-01-net-phy-at803x-remove-extra-space-after-cast.patch
deleted file mode 100644
index 8097a33e49ea..000000000000
--- a/target/linux/generic/backport-6.1/709-v6.8-01-net-phy-at803x-remove-extra-space-after-cast.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From fc9d7264ddc32eaa647d6bfcdc25cdf9f786fde0 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 18 Dec 2023 00:27:39 +0100
-Subject: [PATCH 1/2] net: phy: at803x: remove extra space after cast
-
-Remove extra space after cast as reported by checkpatch to keep code
-clean.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20231217232739.27065-1-ansuelsmth@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/phy/at803x.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -462,7 +462,7 @@ static int at803x_set_wol(struct phy_dev
- 		if (!ndev)
- 			return -ENODEV;
- 
--		mac = (const u8 *) ndev->dev_addr;
-+		mac = (const u8 *)ndev->dev_addr;
- 
- 		if (!is_valid_ether_addr(mac))
- 			return -EINVAL;
diff --git a/target/linux/generic/backport-6.1/709-v6.8-02-net-phy-at803x-replace-msleep-1-with-usleep_range.patch b/target/linux/generic/backport-6.1/709-v6.8-02-net-phy-at803x-replace-msleep-1-with-usleep_range.patch
deleted file mode 100644
index b8d459108777..000000000000
--- a/target/linux/generic/backport-6.1/709-v6.8-02-net-phy-at803x-replace-msleep-1-with-usleep_range.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3ab5720881a924fb6405d9e6a3b09f1026467c47 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 18 Dec 2023 00:25:08 +0100
-Subject: [PATCH 2/2] net: phy: at803x: replace msleep(1) with usleep_range
-
-Replace msleep(1) with usleep_range as suggested by timers-howto guide.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20231217232508.26470-1-ansuelsmth@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/phy/at803x.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -916,9 +916,9 @@ static void at803x_link_change_notify(st
- 		at803x_context_save(phydev, &context);
- 
- 		phy_device_reset(phydev, 1);
--		msleep(1);
-+		usleep_range(1000, 2000);
- 		phy_device_reset(phydev, 0);
--		msleep(1);
-+		usleep_range(1000, 2000);
- 
- 		at803x_context_restore(phydev, &context);
- 
-@@ -1733,7 +1733,7 @@ static int qca83xx_resume(struct phy_dev
- 	if (ret)
- 		return ret;
- 
--	msleep(1);
-+	usleep_range(1000, 2000);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-6.1/710-v6.8-net-phy-at803x-better-align-function-varibles-to-ope.patch b/target/linux/generic/backport-6.1/710-v6.8-net-phy-at803x-better-align-function-varibles-to-ope.patch
deleted file mode 100644
index 776b7bb43f71..000000000000
--- a/target/linux/generic/backport-6.1/710-v6.8-net-phy-at803x-better-align-function-varibles-to-ope.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From 7961ef1fa10ec35ad6923fb5751877116e4b035b Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 19 Dec 2023 21:21:24 +0100
-Subject: [PATCH] net: phy: at803x: better align function varibles to open
- parenthesis
-
-Better align function variables to open parenthesis as suggested by
-checkpatch script for qca808x function to make code cleaner.
-
-For cable_test_get_status function some additional rework was needed to
-handle too long functions.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 67 ++++++++++++++++++++++------------------
- 1 file changed, 37 insertions(+), 30 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1781,27 +1781,27 @@ static int qca808x_phy_fast_retrain_conf
- 		return ret;
- 
- 	phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
--			QCA808X_TOP_OPTION1_DATA);
-+		      QCA808X_TOP_OPTION1_DATA);
- 	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
--			QCA808X_MSE_THRESHOLD_20DB_VALUE);
-+		      QCA808X_MSE_THRESHOLD_20DB_VALUE);
- 	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
--			QCA808X_MSE_THRESHOLD_17DB_VALUE);
-+		      QCA808X_MSE_THRESHOLD_17DB_VALUE);
- 	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
--			QCA808X_MSE_THRESHOLD_27DB_VALUE);
-+		      QCA808X_MSE_THRESHOLD_27DB_VALUE);
- 	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
--			QCA808X_MSE_THRESHOLD_28DB_VALUE);
-+		      QCA808X_MSE_THRESHOLD_28DB_VALUE);
- 	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
--			QCA808X_MMD3_DEBUG_1_VALUE);
-+		      QCA808X_MMD3_DEBUG_1_VALUE);
- 	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
--			QCA808X_MMD3_DEBUG_4_VALUE);
-+		      QCA808X_MMD3_DEBUG_4_VALUE);
- 	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
--			QCA808X_MMD3_DEBUG_5_VALUE);
-+		      QCA808X_MMD3_DEBUG_5_VALUE);
- 	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
--			QCA808X_MMD3_DEBUG_3_VALUE);
-+		      QCA808X_MMD3_DEBUG_3_VALUE);
- 	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
--			QCA808X_MMD3_DEBUG_6_VALUE);
-+		      QCA808X_MMD3_DEBUG_6_VALUE);
- 	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
--			QCA808X_MMD3_DEBUG_2_VALUE);
-+		      QCA808X_MMD3_DEBUG_2_VALUE);
- 
- 	return 0;
- }
-@@ -1838,13 +1838,14 @@ static int qca808x_config_init(struct ph
- 
- 	/* Active adc&vga on 802.3az for the link 1000M and 100M */
- 	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
--			QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
-+			     QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
- 	if (ret)
- 		return ret;
- 
- 	/* Adjust the threshold on 802.3az for the link 1000M */
- 	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
--			QCA808X_PHY_MMD3_AZ_TRAINING_CTRL, QCA808X_MMD3_AZ_TRAINING_VAL);
-+			    QCA808X_PHY_MMD3_AZ_TRAINING_CTRL,
-+			    QCA808X_MMD3_AZ_TRAINING_VAL);
- 	if (ret)
- 		return ret;
- 
-@@ -1870,7 +1871,8 @@ static int qca808x_config_init(struct ph
- 
- 	/* Configure adc threshold as 100mv for the link 10M */
- 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
--			QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV);
-+				     QCA808X_ADC_THRESHOLD_MASK,
-+				     QCA808X_ADC_THRESHOLD_100MV);
- }
- 
- static int qca808x_read_status(struct phy_device *phydev)
-@@ -1883,7 +1885,7 @@ static int qca808x_read_status(struct ph
- 		return ret;
- 
- 	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
--			ret & MDIO_AN_10GBT_STAT_LP2_5G);
-+			 ret & MDIO_AN_10GBT_STAT_LP2_5G);
- 
- 	ret = genphy_read_status(phydev);
- 	if (ret)
-@@ -1913,7 +1915,7 @@ static int qca808x_read_status(struct ph
- 		 */
- 		if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
- 			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
--					qca808x_is_prefer_master(phydev)) {
-+			    qca808x_is_prefer_master(phydev)) {
- 				qca808x_phy_ms_seed_enable(phydev, false);
- 			} else {
- 				qca808x_phy_ms_seed_enable(phydev, true);
-@@ -2070,18 +2072,22 @@ static int qca808x_cable_test_get_status
- 	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
- 				qca808x_cable_test_result_trans(pair_d));
- 
--	if (qca808x_cdt_fault_length_valid(pair_a))
--		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A,
--				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A));
--	if (qca808x_cdt_fault_length_valid(pair_b))
--		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B,
--				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B));
--	if (qca808x_cdt_fault_length_valid(pair_c))
--		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C,
--				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C));
--	if (qca808x_cdt_fault_length_valid(pair_d))
--		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D,
--				qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D));
-+	if (qca808x_cdt_fault_length_valid(pair_a)) {
-+		val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A);
-+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
-+	}
-+	if (qca808x_cdt_fault_length_valid(pair_b)) {
-+		val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B);
-+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
-+	}
-+	if (qca808x_cdt_fault_length_valid(pair_c)) {
-+		val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C);
-+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
-+	}
-+	if (qca808x_cdt_fault_length_valid(pair_d)) {
-+		val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D);
-+		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
-+	}
- 
- 	*finished = true;
- 
-@@ -2148,8 +2154,9 @@ static void qca808x_link_change_notify(s
- 	 * the interface device address is always phy address added by 1.
- 	 */
- 	mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
--			MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
--			QCA8081_PHY_FIFO_RSTN, phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
-+				   MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
-+				   QCA8081_PHY_FIFO_RSTN,
-+				   phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
- }
- 
- static struct phy_driver at803x_driver[] = {
diff --git a/target/linux/generic/backport-6.1/711-v6.8-01-net-phy-at803x-generalize-cdt-fault-length-function.patch b/target/linux/generic/backport-6.1/711-v6.8-01-net-phy-at803x-generalize-cdt-fault-length-function.patch
deleted file mode 100644
index d7196da46e12..000000000000
--- a/target/linux/generic/backport-6.1/711-v6.8-01-net-phy-at803x-generalize-cdt-fault-length-function.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 22eb276098da820d9440fad22901f9b74ed4d659 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 4 Jan 2024 22:30:38 +0100
-Subject: [PATCH 1/4] net: phy: at803x: generalize cdt fault length function
-
-Generalize cable test fault length function since they all base on the
-same magic values (already reverse engineered to understand the meaning
-of it) to have consistenct values on every PHY.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 13 ++++++-------
- 1 file changed, 6 insertions(+), 7 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1192,10 +1192,8 @@ static bool at803x_cdt_fault_length_vali
- 	return false;
- }
- 
--static int at803x_cdt_fault_length(u16 status)
-+static int at803x_cdt_fault_length(int dt)
- {
--	int dt;
--
- 	/* According to the datasheet the distance to the fault is
- 	 * DELTA_TIME * 0.824 meters.
- 	 *
-@@ -1211,8 +1209,6 @@ static int at803x_cdt_fault_length(u16 s
- 	 * With a VF of 0.69 we get the factor 0.824 mentioned in the
- 	 * datasheet.
- 	 */
--	dt = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, status);
--
- 	return (dt * 824) / 10;
- }
- 
-@@ -1265,9 +1261,11 @@ static int at803x_cable_test_one_pair(st
- 	ethnl_cable_test_result(phydev, ethtool_pair[pair],
- 				at803x_cable_test_result_trans(val));
- 
--	if (at803x_cdt_fault_length_valid(val))
-+	if (at803x_cdt_fault_length_valid(val)) {
-+		val = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, val);
- 		ethnl_cable_test_fault_length(phydev, ethtool_pair[pair],
- 					      at803x_cdt_fault_length(val));
-+	}
- 
- 	return 1;
- }
-@@ -1992,7 +1990,8 @@ static int qca808x_cdt_fault_length(stru
- 	if (val < 0)
- 		return val;
- 
--	return (FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val) * 824) / 10;
-+	val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val);
-+	return at803x_cdt_fault_length(val);
- }
- 
- static int qca808x_cable_test_start(struct phy_device *phydev)
diff --git a/target/linux/generic/backport-6.1/711-v6.8-02-net-phy-at803x-refactor-qca808x-cable-test-get-statu.patch b/target/linux/generic/backport-6.1/711-v6.8-02-net-phy-at803x-refactor-qca808x-cable-test-get-statu.patch
deleted file mode 100644
index 5d38fe7e91cb..000000000000
--- a/target/linux/generic/backport-6.1/711-v6.8-02-net-phy-at803x-refactor-qca808x-cable-test-get-statu.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From e0e9ada1df6133513249861c1d91c1dbefd9383b Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 4 Jan 2024 22:30:39 +0100
-Subject: [PATCH 2/4] net: phy: at803x: refactor qca808x cable test get status
- function
-
-Refactor qca808x cable test get status function to remove code
-duplication and clean things up.
-
-The same logic is applied to each pair hence it can be generalized and
-moved to a common function.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 80 ++++++++++++++++++++++++----------------
- 1 file changed, 49 insertions(+), 31 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -2035,10 +2035,43 @@ static int qca808x_cable_test_start(stru
- 	return 0;
- }
- 
-+static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
-+					      u16 status)
-+{
-+	u16 pair_code;
-+	int length;
-+
-+	switch (pair) {
-+	case ETHTOOL_A_CABLE_PAIR_A:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_B:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_C:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_D:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	ethnl_cable_test_result(phydev, pair,
-+				qca808x_cable_test_result_trans(pair_code));
-+
-+	if (qca808x_cdt_fault_length_valid(pair_code)) {
-+		length = qca808x_cdt_fault_length(phydev, pair);
-+		ethnl_cable_test_fault_length(phydev, pair, length);
-+	}
-+
-+	return 0;
-+}
-+
- static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
- {
- 	int ret, val;
--	int pair_a, pair_b, pair_c, pair_d;
- 
- 	*finished = false;
- 
-@@ -2057,36 +2090,21 @@ static int qca808x_cable_test_get_status
- 	if (val < 0)
- 		return val;
- 
--	pair_a = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, val);
--	pair_b = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, val);
--	pair_c = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, val);
--	pair_d = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, val);
--
--	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
--				qca808x_cable_test_result_trans(pair_a));
--	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
--				qca808x_cable_test_result_trans(pair_b));
--	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
--				qca808x_cable_test_result_trans(pair_c));
--	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
--				qca808x_cable_test_result_trans(pair_d));
--
--	if (qca808x_cdt_fault_length_valid(pair_a)) {
--		val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A);
--		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
--	}
--	if (qca808x_cdt_fault_length_valid(pair_b)) {
--		val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B);
--		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
--	}
--	if (qca808x_cdt_fault_length_valid(pair_c)) {
--		val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C);
--		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
--	}
--	if (qca808x_cdt_fault_length_valid(pair_d)) {
--		val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D);
--		ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
--	}
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
-+	if (ret)
-+		return ret;
- 
- 	*finished = true;
- 
diff --git a/target/linux/generic/backport-6.1/711-v6.8-03-net-phy-at803x-add-support-for-cdt-cross-short-test-.patch b/target/linux/generic/backport-6.1/711-v6.8-03-net-phy-at803x-add-support-for-cdt-cross-short-test-.patch
deleted file mode 100644
index d5793860a968..000000000000
--- a/target/linux/generic/backport-6.1/711-v6.8-03-net-phy-at803x-add-support-for-cdt-cross-short-test-.patch
+++ /dev/null
@@ -1,182 +0,0 @@
-From ea73e5ea442ee2aade67b1fb1233ccb3cbea2ceb Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 4 Jan 2024 22:30:40 +0100
-Subject: [PATCH 3/4] net: phy: at803x: add support for cdt cross short test
- for qca808x
-
-QCA808x PHY Family supports Cable Diagnostic Test also for Cross Pair
-Short.
-
-Add all the define to make enable and support these additional tests.
-
-Cross Short test was previously disabled by default, this is now changed
-and enabled by default. In this mode, the mask changed a bit and length
-is shifted based on the fault condition.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 86 ++++++++++++++++++++++++++++++++--------
- 1 file changed, 69 insertions(+), 17 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -254,6 +254,7 @@
- 
- #define QCA808X_CDT_ENABLE_TEST			BIT(15)
- #define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
-+#define QCA808X_CDT_STATUS			BIT(11)
- #define QCA808X_CDT_LENGTH_UNIT			BIT(10)
- 
- #define QCA808X_MMD3_CDT_STATUS			0x8064
-@@ -261,16 +262,44 @@
- #define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
- #define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
- #define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
--#define QCA808X_CDT_DIAG_LENGTH			GENMASK(7, 0)
-+#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
-+#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
- 
- #define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
- #define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
- #define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
- #define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
--#define QCA808X_CDT_STATUS_STAT_FAIL		0
--#define QCA808X_CDT_STATUS_STAT_NORMAL		1
--#define QCA808X_CDT_STATUS_STAT_OPEN		2
--#define QCA808X_CDT_STATUS_STAT_SHORT		3
-+
-+#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
-+#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
-+#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
-+#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
-+#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
-+
-+#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
-+#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
-+#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
-+#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
-+
-+/* NORMAL are MDI with type set to 0 */
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI1)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI1)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI2)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI2)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI3)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI3)
-+
-+/* Added for reference of existence but should be handled by wait_for_completion already */
-+#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
- 
- /* QCA808X 1G chip type */
- #define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
-@@ -1941,8 +1970,17 @@ static int qca808x_soft_reset(struct phy
- static bool qca808x_cdt_fault_length_valid(int cdt_code)
- {
- 	switch (cdt_code) {
--	case QCA808X_CDT_STATUS_STAT_SHORT:
--	case QCA808X_CDT_STATUS_STAT_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
- 		return true;
- 	default:
- 		return false;
-@@ -1954,17 +1992,28 @@ static int qca808x_cable_test_result_tra
- 	switch (cdt_code) {
- 	case QCA808X_CDT_STATUS_STAT_NORMAL:
- 		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
--	case QCA808X_CDT_STATUS_STAT_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
- 		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
--	case QCA808X_CDT_STATUS_STAT_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
- 		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
- 	case QCA808X_CDT_STATUS_STAT_FAIL:
- 	default:
- 		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
- 	}
- }
- 
--static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
-+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
-+				    int result)
- {
- 	int val;
- 	u32 cdt_length_reg = 0;
-@@ -1990,7 +2039,11 @@ static int qca808x_cdt_fault_length(stru
- 	if (val < 0)
- 		return val;
- 
--	val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val);
-+	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
-+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
-+	else
-+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
-+
- 	return at803x_cdt_fault_length(val);
- }
- 
-@@ -2038,8 +2091,8 @@ static int qca808x_cable_test_start(stru
- static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
- 					      u16 status)
- {
-+	int length, result;
- 	u16 pair_code;
--	int length;
- 
- 	switch (pair) {
- 	case ETHTOOL_A_CABLE_PAIR_A:
-@@ -2058,11 +2111,11 @@ static int qca808x_cable_test_get_pair_s
- 		return -EINVAL;
- 	}
- 
--	ethnl_cable_test_result(phydev, pair,
--				qca808x_cable_test_result_trans(pair_code));
-+	result = qca808x_cable_test_result_trans(pair_code);
-+	ethnl_cable_test_result(phydev, pair, result);
- 
- 	if (qca808x_cdt_fault_length_valid(pair_code)) {
--		length = qca808x_cdt_fault_length(phydev, pair);
-+		length = qca808x_cdt_fault_length(phydev, pair, result);
- 		ethnl_cable_test_fault_length(phydev, pair, length);
- 	}
- 
-@@ -2076,8 +2129,7 @@ static int qca808x_cable_test_get_status
- 	*finished = false;
- 
- 	val = QCA808X_CDT_ENABLE_TEST |
--	      QCA808X_CDT_LENGTH_UNIT |
--	      QCA808X_CDT_INTER_CHECK_DIS;
-+	      QCA808X_CDT_LENGTH_UNIT;
- 	ret = at803x_cdt_start(phydev, val);
- 	if (ret)
- 		return ret;
diff --git a/target/linux/generic/backport-6.1/711-v6.8-04-net-phy-at803x-make-read_status-more-generic.patch b/target/linux/generic/backport-6.1/711-v6.8-04-net-phy-at803x-make-read_status-more-generic.patch
deleted file mode 100644
index c146e502fe8c..000000000000
--- a/target/linux/generic/backport-6.1/711-v6.8-04-net-phy-at803x-make-read_status-more-generic.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From c34d9452d4e5d98a655d7b625e85466320885416 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 4 Jan 2024 22:30:41 +0100
-Subject: [PATCH 4/4] net: phy: at803x: make read_status more generic
-
-Make read_status more generic in preparation on moving it to shared
-library as other PHY Family Driver will have the exact same
-implementation.
-
-The only specific part was a check for AR8031/33 if 1000basex was used.
-The check is moved to a dedicated function specific for those PHYs.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 17 ++++++++++++-----
- 1 file changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -1020,13 +1020,9 @@ static int at803x_read_specific_status(s
- 
- static int at803x_read_status(struct phy_device *phydev)
- {
--	struct at803x_priv *priv = phydev->priv;
- 	struct at803x_ss_mask ss_mask = { 0 };
- 	int err, old_link = phydev->link;
- 
--	if (priv->is_1000basex)
--		return genphy_c37_read_status(phydev);
--
- 	/* Update the link, but return if there was an error */
- 	err = genphy_update_link(phydev);
- 	if (err)
-@@ -1618,6 +1614,17 @@ static int at8031_config_intr(struct phy
- 	return at803x_config_intr(phydev);
- }
- 
-+/* AR8031 and AR8033 share the same read status logic */
-+static int at8031_read_status(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+
-+	if (priv->is_1000basex)
-+		return genphy_c37_read_status(phydev);
-+
-+	return at803x_read_status(phydev);
-+}
-+
- /* AR8031 and AR8035 share the same cable test get status reg */
- static int at8031_cable_test_get_status(struct phy_device *phydev,
- 					bool *finished)
-@@ -2281,7 +2288,7 @@ static struct phy_driver at803x_driver[]
- 	.read_page		= at803x_read_page,
- 	.write_page		= at803x_write_page,
- 	.get_features		= at803x_get_features,
--	.read_status		= at803x_read_status,
-+	.read_status		= at8031_read_status,
- 	.config_intr		= at8031_config_intr,
- 	.handle_interrupt	= at803x_handle_interrupt,
- 	.get_tunable		= at803x_get_tunable,
diff --git a/target/linux/generic/backport-6.1/712-v6.9-net-phy-at803x-add-LED-support-for-qca808x.patch b/target/linux/generic/backport-6.1/712-v6.9-net-phy-at803x-add-LED-support-for-qca808x.patch
deleted file mode 100644
index 36675e7588dd..000000000000
--- a/target/linux/generic/backport-6.1/712-v6.9-net-phy-at803x-add-LED-support-for-qca808x.patch
+++ /dev/null
@@ -1,408 +0,0 @@
-From 7196062b64ee470b91015f3d2e82d225948258ea Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 25 Jan 2024 21:37:01 +0100
-Subject: [PATCH 5/5] net: phy: at803x: add LED support for qca808x
-
-Add LED support for QCA8081 PHY.
-
-Documentation for this LEDs PHY is very scarce even with NDA access
-to Documentation for OEMs. Only the blink pattern are documented and are
-very confusing most of the time. No documentation is present about
-forcing the LED on/off or to always blink.
-
-Those settings were reversed by poking the regs and trying to find the
-correct bits to trigger these modes. Some bits mode are not clear and
-maybe the documentation option are not 100% correct. For the sake of LED
-support the reversed option are enough to add support for current LED
-APIs.
-
-Supported HW control modes are:
-- tx
-- rx
-- link_10
-- link_100
-- link_1000
-- link_2500
-- half_duplex
-- full_duplex
-
-Also add support for LED polarity set to set LED polarity to active
-high or low. QSDK sets this value to high by default but PHY reset value
-doesn't have this enabled by default.
-
-QSDK also sets 2 additional bits but their usage is not clear, info about
-this is added in the header. It was verified that for correct function
-of the LED if active high is needed, only BIT 6 is needed.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240125203702.4552-6-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/at803x.c | 327 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 327 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -301,6 +301,87 @@
- /* Added for reference of existence but should be handled by wait_for_completion already */
- #define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
- 
-+#define QCA808X_MMD7_LED_GLOBAL			0x8073
-+#define QCA808X_LED_BLINK_1			GENMASK(11, 6)
-+#define QCA808X_LED_BLINK_2			GENMASK(5, 0)
-+/* Values are the same for both BLINK_1 and BLINK_2 */
-+#define QCA808X_LED_BLINK_FREQ_MASK		GENMASK(5, 3)
-+#define QCA808X_LED_BLINK_FREQ_2HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
-+#define QCA808X_LED_BLINK_FREQ_4HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
-+#define QCA808X_LED_BLINK_FREQ_8HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
-+#define QCA808X_LED_BLINK_FREQ_16HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
-+#define QCA808X_LED_BLINK_FREQ_32HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
-+#define QCA808X_LED_BLINK_FREQ_64HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
-+#define QCA808X_LED_BLINK_FREQ_128HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
-+#define QCA808X_LED_BLINK_FREQ_256HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
-+#define QCA808X_LED_BLINK_DUTY_MASK		GENMASK(2, 0)
-+#define QCA808X_LED_BLINK_DUTY_50_50		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
-+#define QCA808X_LED_BLINK_DUTY_75_25		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
-+#define QCA808X_LED_BLINK_DUTY_25_75		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
-+#define QCA808X_LED_BLINK_DUTY_33_67		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
-+#define QCA808X_LED_BLINK_DUTY_67_33		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
-+#define QCA808X_LED_BLINK_DUTY_17_83		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
-+#define QCA808X_LED_BLINK_DUTY_83_17		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
-+#define QCA808X_LED_BLINK_DUTY_8_92		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
-+
-+#define QCA808X_MMD7_LED2_CTRL			0x8074
-+#define QCA808X_MMD7_LED2_FORCE_CTRL		0x8075
-+#define QCA808X_MMD7_LED1_CTRL			0x8076
-+#define QCA808X_MMD7_LED1_FORCE_CTRL		0x8077
-+#define QCA808X_MMD7_LED0_CTRL			0x8078
-+#define QCA808X_MMD7_LED_CTRL(x)		(0x8078 - ((x) * 2))
-+
-+/* LED hw control pattern is the same for every LED */
-+#define QCA808X_LED_PATTERN_MASK		GENMASK(15, 0)
-+#define QCA808X_LED_SPEED2500_ON		BIT(15)
-+#define QCA808X_LED_SPEED2500_BLINK		BIT(14)
-+/* Follow blink trigger even if duplex or speed condition doesn't match */
-+#define QCA808X_LED_BLINK_CHECK_BYPASS		BIT(13)
-+#define QCA808X_LED_FULL_DUPLEX_ON		BIT(12)
-+#define QCA808X_LED_HALF_DUPLEX_ON		BIT(11)
-+#define QCA808X_LED_TX_BLINK			BIT(10)
-+#define QCA808X_LED_RX_BLINK			BIT(9)
-+#define QCA808X_LED_TX_ON_10MS			BIT(8)
-+#define QCA808X_LED_RX_ON_10MS			BIT(7)
-+#define QCA808X_LED_SPEED1000_ON		BIT(6)
-+#define QCA808X_LED_SPEED100_ON			BIT(5)
-+#define QCA808X_LED_SPEED10_ON			BIT(4)
-+#define QCA808X_LED_COLLISION_BLINK		BIT(3)
-+#define QCA808X_LED_SPEED1000_BLINK		BIT(2)
-+#define QCA808X_LED_SPEED100_BLINK		BIT(1)
-+#define QCA808X_LED_SPEED10_BLINK		BIT(0)
-+
-+#define QCA808X_MMD7_LED0_FORCE_CTRL		0x8079
-+#define QCA808X_MMD7_LED_FORCE_CTRL(x)		(0x8079 - ((x) * 2))
-+
-+/* LED force ctrl is the same for every LED
-+ * No documentation exist for this, not even internal one
-+ * with NDA as QCOM gives only info about configuring
-+ * hw control pattern rules and doesn't indicate any way
-+ * to force the LED to specific mode.
-+ * These define comes from reverse and testing and maybe
-+ * lack of some info or some info are not entirely correct.
-+ * For the basic LED control and hw control these finding
-+ * are enough to support LED control in all the required APIs.
-+ *
-+ * On doing some comparison with implementation with qca807x,
-+ * it was found that it's 1:1 equal to it and confirms all the
-+ * reverse done. It was also found further specification with the
-+ * force mode and the blink modes.
-+ */
-+#define QCA808X_LED_FORCE_EN			BIT(15)
-+#define QCA808X_LED_FORCE_MODE_MASK		GENMASK(14, 13)
-+#define QCA808X_LED_FORCE_BLINK_1		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
-+#define QCA808X_LED_FORCE_BLINK_2		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
-+#define QCA808X_LED_FORCE_ON			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
-+#define QCA808X_LED_FORCE_OFF			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
-+
-+#define QCA808X_MMD7_LED_POLARITY_CTRL		0x901a
-+/* QSDK sets by default 0x46 to this reg that sets BIT 6 for
-+ * LED to active high. It's not clear what BIT 3 and BIT 4 does.
-+ */
-+#define QCA808X_LED_ACTIVE_HIGH			BIT(6)
-+
- /* QCA808X 1G chip type */
- #define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
- #define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
-@@ -346,6 +427,7 @@ struct at803x_priv {
- 	struct regulator_dev *vddio_rdev;
- 	struct regulator_dev *vddh_rdev;
- 	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
-+	int led_polarity_mode;
- };
- 
- struct at803x_context {
-@@ -706,6 +788,9 @@ static int at803x_probe(struct phy_devic
- 	if (!priv)
- 		return -ENOMEM;
- 
-+	/* Init LED polarity mode to -1 */
-+	priv->led_polarity_mode = -1;
-+
- 	phydev->priv = priv;
- 
- 	ret = at803x_parse_dt(phydev);
-@@ -2235,6 +2320,242 @@ static void qca808x_link_change_notify(s
- 				   phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
- }
- 
-+static int qca808x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
-+				    u16 *offload_trigger)
-+{
-+	/* Parsing specific to netdev trigger */
-+	if (test_bit(TRIGGER_NETDEV_TX, &rules))
-+		*offload_trigger |= QCA808X_LED_TX_BLINK;
-+	if (test_bit(TRIGGER_NETDEV_RX, &rules))
-+		*offload_trigger |= QCA808X_LED_RX_BLINK;
-+	if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED10_ON;
-+	if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED100_ON;
-+	if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED1000_ON;
-+	if (test_bit(TRIGGER_NETDEV_LINK_2500, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED2500_ON;
-+	if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
-+		*offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
-+	if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
-+		*offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
-+
-+	if (rules && !*offload_trigger)
-+		return -EOPNOTSUPP;
-+
-+	/* Enable BLINK_CHECK_BYPASS by default to make the LED
-+	 * blink even with duplex or speed mode not enabled.
-+	 */
-+	*offload_trigger |= QCA808X_LED_BLINK_CHECK_BYPASS;
-+
-+	return 0;
-+}
-+
-+static int qca808x_led_hw_control_enable(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
-+				  QCA808X_LED_FORCE_EN);
-+}
-+
-+static int qca808x_led_hw_is_supported(struct phy_device *phydev, u8 index,
-+				       unsigned long rules)
-+{
-+	u16 offload_trigger = 0;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	return qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
-+}
-+
-+static int qca808x_led_hw_control_set(struct phy_device *phydev, u8 index,
-+				      unsigned long rules)
-+{
-+	u16 reg, offload_trigger = 0;
-+	int ret;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_CTRL(index);
-+
-+	ret = qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_led_hw_control_enable(phydev, index);
-+	if (ret)
-+		return ret;
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			      QCA808X_LED_PATTERN_MASK,
-+			      offload_trigger);
-+}
-+
-+static bool qca808x_led_hw_control_status(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+	int val;
-+
-+	if (index > 2)
-+		return false;
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-+
-+	return !(val & QCA808X_LED_FORCE_EN);
-+}
-+
-+static int qca808x_led_hw_control_get(struct phy_device *phydev, u8 index,
-+				      unsigned long *rules)
-+{
-+	u16 reg;
-+	int val;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	/* Check if we have hw control enabled */
-+	if (qca808x_led_hw_control_status(phydev, index))
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_CTRL(index);
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-+	if (val & QCA808X_LED_TX_BLINK)
-+		set_bit(TRIGGER_NETDEV_TX, rules);
-+	if (val & QCA808X_LED_RX_BLINK)
-+		set_bit(TRIGGER_NETDEV_RX, rules);
-+	if (val & QCA808X_LED_SPEED10_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_10, rules);
-+	if (val & QCA808X_LED_SPEED100_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_100, rules);
-+	if (val & QCA808X_LED_SPEED1000_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_1000, rules);
-+	if (val & QCA808X_LED_SPEED2500_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_2500, rules);
-+	if (val & QCA808X_LED_HALF_DUPLEX_ON)
-+		set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
-+	if (val & QCA808X_LED_FULL_DUPLEX_ON)
-+		set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
-+
-+	return 0;
-+}
-+
-+static int qca808x_led_hw_control_reset(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_CTRL(index);
-+
-+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
-+				  QCA808X_LED_PATTERN_MASK);
-+}
-+
-+static int qca808x_led_brightness_set(struct phy_device *phydev,
-+				      u8 index, enum led_brightness value)
-+{
-+	u16 reg;
-+	int ret;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	if (!value) {
-+		ret = qca808x_led_hw_control_reset(phydev, index);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			      QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
-+			      QCA808X_LED_FORCE_EN | value ? QCA808X_LED_FORCE_ON :
-+							     QCA808X_LED_FORCE_OFF);
-+}
-+
-+static int qca808x_led_blink_set(struct phy_device *phydev, u8 index,
-+				 unsigned long *delay_on,
-+				 unsigned long *delay_off)
-+{
-+	int ret;
-+	u16 reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	/* Set blink to 50% off, 50% on at 4Hz by default */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
-+			     QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
-+			     QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
-+	if (ret)
-+		return ret;
-+
-+	/* We use BLINK_1 for normal blinking */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
-+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
-+	if (ret)
-+		return ret;
-+
-+	/* We set blink to 4Hz, aka 250ms */
-+	*delay_on = 250 / 2;
-+	*delay_off = 250 / 2;
-+
-+	return 0;
-+}
-+
-+static int qca808x_led_polarity_set(struct phy_device *phydev, int index,
-+				    unsigned long modes)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	bool active_low = false;
-+	u32 mode;
-+
-+	for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
-+		switch (mode) {
-+		case PHY_LED_ACTIVE_LOW:
-+			active_low = true;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+	}
-+
-+	/* PHY polarity is global and can't be set per LED.
-+	 * To detect this, check if last requested polarity mode
-+	 * match the new one.
-+	 */
-+	if (priv->led_polarity_mode >= 0 &&
-+	    priv->led_polarity_mode != active_low) {
-+		phydev_err(phydev, "PHY polarity is global. Mismatched polarity on different LED\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Save the last PHY polarity mode */
-+	priv->led_polarity_mode = active_low;
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN,
-+			      QCA808X_MMD7_LED_POLARITY_CTRL,
-+			      QCA808X_LED_ACTIVE_HIGH,
-+			      active_low ? 0 : QCA808X_LED_ACTIVE_HIGH);
-+}
-+
- static struct phy_driver at803x_driver[] = {
- {
- 	/* Qualcomm Atheros AR8035 */
-@@ -2411,6 +2732,12 @@ static struct phy_driver at803x_driver[]
- 	.cable_test_start	= qca808x_cable_test_start,
- 	.cable_test_get_status	= qca808x_cable_test_get_status,
- 	.link_change_notify	= qca808x_link_change_notify,
-+	.led_brightness_set	= qca808x_led_brightness_set,
-+	.led_blink_set		= qca808x_led_blink_set,
-+	.led_hw_is_supported	= qca808x_led_hw_is_supported,
-+	.led_hw_control_set	= qca808x_led_hw_control_set,
-+	.led_hw_control_get	= qca808x_led_hw_control_get,
-+	.led_polarity_set	= qca808x_led_polarity_set,
- }, };
- 
- module_phy_driver(at803x_driver);
diff --git a/target/linux/generic/backport-6.1/713-v6.9-01-net-phy-move-at803x-PHY-driver-to-dedicated-director.patch b/target/linux/generic/backport-6.1/713-v6.9-01-net-phy-move-at803x-PHY-driver-to-dedicated-director.patch
deleted file mode 100644
index 8c9babea7b12..000000000000
--- a/target/linux/generic/backport-6.1/713-v6.9-01-net-phy-move-at803x-PHY-driver-to-dedicated-director.patch
+++ /dev/null
@@ -1,5598 +0,0 @@
-From 9e56ff53b4115875667760445b028357848b4748 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 Jan 2024 15:15:19 +0100
-Subject: [PATCH 1/5] net: phy: move at803x PHY driver to dedicated directory
-
-In preparation for addition of other Qcom PHY and to tidy things up,
-move the at803x PHY driver to dedicated directory.
-
-The same order in the Kconfig selection is saved.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240129141600.2592-2-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/Kconfig             | 7 +------
- drivers/net/phy/Makefile            | 2 +-
- drivers/net/phy/qcom/Kconfig        | 7 +++++++
- drivers/net/phy/qcom/Makefile       | 2 ++
- drivers/net/phy/{ => qcom}/at803x.c | 0
- 5 files changed, 11 insertions(+), 7 deletions(-)
- create mode 100644 drivers/net/phy/qcom/Kconfig
- create mode 100644 drivers/net/phy/qcom/Makefile
- rename drivers/net/phy/{ => qcom}/at803x.c (100%)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -277,12 +277,7 @@ config NXP_TJA11XX_PHY
- 	help
- 	  Currently supports the NXP TJA1100 and TJA1101 PHY.
- 
--config AT803X_PHY
--	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
--	depends on REGULATOR
--	help
--	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
--	  QCA8337(Internal qca8k PHY) model
-+source "drivers/net/phy/qcom/Kconfig"
- 
- config QSEMI_PHY
- 	tristate "Quality Semiconductor PHYs"
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -34,7 +34,6 @@ obj-$(CONFIG_ADIN_PHY)		+= adin.o
- obj-$(CONFIG_ADIN1100_PHY)	+= adin1100.o
- obj-$(CONFIG_AMD_PHY)		+= amd.o
- obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia/
--obj-$(CONFIG_AT803X_PHY)	+= at803x.o
- obj-$(CONFIG_AX88796B_PHY)	+= ax88796b.o
- obj-$(CONFIG_BCM54140_PHY)	+= bcm54140.o
- obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
-@@ -75,6 +74,7 @@ obj-$(CONFIG_MOTORCOMM_PHY)	+= motorcomm
- obj-$(CONFIG_NATIONAL_PHY)	+= national.o
- obj-$(CONFIG_NXP_C45_TJA11XX_PHY)	+= nxp-c45-tja11xx.o
- obj-$(CONFIG_NXP_TJA11XX_PHY)	+= nxp-tja11xx.o
-+obj-y				+= qcom/
- obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
- obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
- obj-$(CONFIG_RENESAS_PHY)	+= uPD60620.o
---- /dev/null
-+++ b/drivers/net/phy/qcom/Kconfig
-@@ -0,0 +1,7 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+config AT803X_PHY
-+	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
-+	depends on REGULATOR
-+	help
-+	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
-+	  QCA8337(Internal qca8k PHY) model
---- /dev/null
-+++ b/drivers/net/phy/qcom/Makefile
-@@ -0,0 +1,2 @@
-+# SPDX-License-Identifier: GPL-2.0
-+obj-$(CONFIG_AT803X_PHY)	+= at803x.o
---- a/drivers/net/phy/at803x.c
-+++ /dev/null
-@@ -1,2759 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0+
--/*
-- * drivers/net/phy/at803x.c
-- *
-- * Driver for Qualcomm Atheros AR803x PHY
-- *
-- * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
-- */
--
--#include <linux/phy.h>
--#include <linux/module.h>
--#include <linux/string.h>
--#include <linux/netdevice.h>
--#include <linux/etherdevice.h>
--#include <linux/ethtool_netlink.h>
--#include <linux/bitfield.h>
--#include <linux/regulator/of_regulator.h>
--#include <linux/regulator/driver.h>
--#include <linux/regulator/consumer.h>
--#include <linux/of.h>
--#include <linux/phylink.h>
--#include <linux/sfp.h>
--#include <dt-bindings/net/qca-ar803x.h>
--
--#define AT803X_SPECIFIC_FUNCTION_CONTROL	0x10
--#define AT803X_SFC_ASSERT_CRS			BIT(11)
--#define AT803X_SFC_FORCE_LINK			BIT(10)
--#define AT803X_SFC_MDI_CROSSOVER_MODE_M		GENMASK(6, 5)
--#define AT803X_SFC_AUTOMATIC_CROSSOVER		0x3
--#define AT803X_SFC_MANUAL_MDIX			0x1
--#define AT803X_SFC_MANUAL_MDI			0x0
--#define AT803X_SFC_SQE_TEST			BIT(2)
--#define AT803X_SFC_POLARITY_REVERSAL		BIT(1)
--#define AT803X_SFC_DISABLE_JABBER		BIT(0)
--
--#define AT803X_SPECIFIC_STATUS			0x11
--#define AT803X_SS_SPEED_MASK			GENMASK(15, 14)
--#define AT803X_SS_SPEED_1000			2
--#define AT803X_SS_SPEED_100			1
--#define AT803X_SS_SPEED_10			0
--#define AT803X_SS_DUPLEX			BIT(13)
--#define AT803X_SS_SPEED_DUPLEX_RESOLVED		BIT(11)
--#define AT803X_SS_MDIX				BIT(6)
--
--#define QCA808X_SS_SPEED_MASK			GENMASK(9, 7)
--#define QCA808X_SS_SPEED_2500			4
--
--#define AT803X_INTR_ENABLE			0x12
--#define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
--#define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
--#define AT803X_INTR_ENABLE_DUPLEX_CHANGED	BIT(13)
--#define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
--#define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
--#define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
--#define AT803X_INTR_ENABLE_LINK_FAIL_BX		BIT(8)
--#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX	BIT(7)
--#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
--#define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
--#define AT803X_INTR_ENABLE_WOL			BIT(0)
--
--#define AT803X_INTR_STATUS			0x13
--
--#define AT803X_SMART_SPEED			0x14
--#define AT803X_SMART_SPEED_ENABLE		BIT(5)
--#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK	GENMASK(4, 2)
--#define AT803X_SMART_SPEED_BYPASS_TIMER		BIT(1)
--#define AT803X_CDT				0x16
--#define AT803X_CDT_MDI_PAIR_MASK		GENMASK(9, 8)
--#define AT803X_CDT_ENABLE_TEST			BIT(0)
--#define AT803X_CDT_STATUS			0x1c
--#define AT803X_CDT_STATUS_STAT_NORMAL		0
--#define AT803X_CDT_STATUS_STAT_SHORT		1
--#define AT803X_CDT_STATUS_STAT_OPEN		2
--#define AT803X_CDT_STATUS_STAT_FAIL		3
--#define AT803X_CDT_STATUS_STAT_MASK		GENMASK(9, 8)
--#define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
--#define AT803X_LED_CONTROL			0x18
--
--#define AT803X_PHY_MMD3_WOL_CTRL		0x8012
--#define AT803X_WOL_EN				BIT(5)
--#define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
--#define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
--#define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
--#define AT803X_REG_CHIP_CONFIG			0x1f
--#define AT803X_BT_BX_REG_SEL			0x8000
--
--#define AT803X_DEBUG_ADDR			0x1D
--#define AT803X_DEBUG_DATA			0x1E
--
--#define AT803X_MODE_CFG_MASK			0x0F
--#define AT803X_MODE_CFG_BASET_RGMII		0x00
--#define AT803X_MODE_CFG_BASET_SGMII		0x01
--#define AT803X_MODE_CFG_BX1000_RGMII_50OHM	0x02
--#define AT803X_MODE_CFG_BX1000_RGMII_75OHM	0x03
--#define AT803X_MODE_CFG_BX1000_CONV_50OHM	0x04
--#define AT803X_MODE_CFG_BX1000_CONV_75OHM	0x05
--#define AT803X_MODE_CFG_FX100_RGMII_50OHM	0x06
--#define AT803X_MODE_CFG_FX100_CONV_50OHM	0x07
--#define AT803X_MODE_CFG_RGMII_AUTO_MDET		0x0B
--#define AT803X_MODE_CFG_FX100_RGMII_75OHM	0x0E
--#define AT803X_MODE_CFG_FX100_CONV_75OHM	0x0F
--
--#define AT803X_PSSR				0x11	/*PHY-Specific Status Register*/
--#define AT803X_PSSR_MR_AN_COMPLETE		0x0200
--
--#define AT803X_DEBUG_ANALOG_TEST_CTRL		0x00
--#define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
--#define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
--#define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
--
--#define AT803X_DEBUG_SYSTEM_CTRL_MODE		0x05
--#define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
--
--#define AT803X_DEBUG_REG_HIB_CTRL		0x0b
--#define   AT803X_DEBUG_HIB_CTRL_SEL_RST_80U	BIT(10)
--#define   AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE	BIT(13)
--#define   AT803X_DEBUG_HIB_CTRL_PS_HIB_EN	BIT(15)
--
--#define AT803X_DEBUG_REG_3C			0x3C
--
--#define AT803X_DEBUG_REG_GREEN			0x3D
--#define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
--
--#define AT803X_DEBUG_REG_1F			0x1F
--#define AT803X_DEBUG_PLL_ON			BIT(2)
--#define AT803X_DEBUG_RGMII_1V8			BIT(3)
--
--#define MDIO_AZ_DEBUG				0x800D
--
--/* AT803x supports either the XTAL input pad, an internal PLL or the
-- * DSP as clock reference for the clock output pad. The XTAL reference
-- * is only used for 25 MHz output, all other frequencies need the PLL.
-- * The DSP as a clock reference is used in synchronous ethernet
-- * applications.
-- *
-- * By default the PLL is only enabled if there is a link. Otherwise
-- * the PHY will go into low power state and disabled the PLL. You can
-- * set the PLL_ON bit (see debug register 0x1f) to keep the PLL always
-- * enabled.
-- */
--#define AT803X_MMD7_CLK25M			0x8016
--#define AT803X_CLK_OUT_MASK			GENMASK(4, 2)
--#define AT803X_CLK_OUT_25MHZ_XTAL		0
--#define AT803X_CLK_OUT_25MHZ_DSP		1
--#define AT803X_CLK_OUT_50MHZ_PLL		2
--#define AT803X_CLK_OUT_50MHZ_DSP		3
--#define AT803X_CLK_OUT_62_5MHZ_PLL		4
--#define AT803X_CLK_OUT_62_5MHZ_DSP		5
--#define AT803X_CLK_OUT_125MHZ_PLL		6
--#define AT803X_CLK_OUT_125MHZ_DSP		7
--
--/* The AR8035 has another mask which is compatible with the AR8031/AR8033 mask
-- * but doesn't support choosing between XTAL/PLL and DSP.
-- */
--#define AT8035_CLK_OUT_MASK			GENMASK(4, 3)
--
--#define AT803X_CLK_OUT_STRENGTH_MASK		GENMASK(8, 7)
--#define AT803X_CLK_OUT_STRENGTH_FULL		0
--#define AT803X_CLK_OUT_STRENGTH_HALF		1
--#define AT803X_CLK_OUT_STRENGTH_QUARTER		2
--
--#define AT803X_DEFAULT_DOWNSHIFT		5
--#define AT803X_MIN_DOWNSHIFT			2
--#define AT803X_MAX_DOWNSHIFT			9
--
--#define AT803X_MMD3_SMARTEEE_CTL1		0x805b
--#define AT803X_MMD3_SMARTEEE_CTL2		0x805c
--#define AT803X_MMD3_SMARTEEE_CTL3		0x805d
--#define AT803X_MMD3_SMARTEEE_CTL3_LPI_EN	BIT(8)
--
--#define ATH9331_PHY_ID				0x004dd041
--#define ATH8030_PHY_ID				0x004dd076
--#define ATH8031_PHY_ID				0x004dd074
--#define ATH8032_PHY_ID				0x004dd023
--#define ATH8035_PHY_ID				0x004dd072
--#define AT8030_PHY_ID_MASK			0xffffffef
--
--#define QCA8081_PHY_ID				0x004dd101
--
--#define QCA8327_A_PHY_ID			0x004dd033
--#define QCA8327_B_PHY_ID			0x004dd034
--#define QCA8337_PHY_ID				0x004dd036
--#define QCA9561_PHY_ID				0x004dd042
--#define QCA8K_PHY_ID_MASK			0xffffffff
--
--#define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
--
--#define AT803X_PAGE_FIBER			0
--#define AT803X_PAGE_COPPER			1
--
--/* don't turn off internal PLL */
--#define AT803X_KEEP_PLL_ENABLED			BIT(0)
--#define AT803X_DISABLE_SMARTEEE			BIT(1)
--
--/* disable hibernation mode */
--#define AT803X_DISABLE_HIBERNATION_MODE		BIT(2)
--
--/* ADC threshold */
--#define QCA808X_PHY_DEBUG_ADC_THRESHOLD		0x2c80
--#define QCA808X_ADC_THRESHOLD_MASK		GENMASK(7, 0)
--#define QCA808X_ADC_THRESHOLD_80MV		0
--#define QCA808X_ADC_THRESHOLD_100MV		0xf0
--#define QCA808X_ADC_THRESHOLD_200MV		0x0f
--#define QCA808X_ADC_THRESHOLD_300MV		0xff
--
--/* CLD control */
--#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7		0x8007
--#define QCA808X_8023AZ_AFE_CTRL_MASK		GENMASK(8, 4)
--#define QCA808X_8023AZ_AFE_EN			0x90
--
--/* AZ control */
--#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL	0x8008
--#define QCA808X_MMD3_AZ_TRAINING_VAL		0x1c32
--
--#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB	0x8014
--#define QCA808X_MSE_THRESHOLD_20DB_VALUE	0x529
--
--#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB	0x800E
--#define QCA808X_MSE_THRESHOLD_17DB_VALUE	0x341
--
--#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB	0x801E
--#define QCA808X_MSE_THRESHOLD_27DB_VALUE	0x419
--
--#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB	0x8020
--#define QCA808X_MSE_THRESHOLD_28DB_VALUE	0x341
--
--#define QCA808X_PHY_MMD7_TOP_OPTION1		0x901c
--#define QCA808X_TOP_OPTION1_DATA		0x0
--
--#define QCA808X_PHY_MMD3_DEBUG_1		0xa100
--#define QCA808X_MMD3_DEBUG_1_VALUE		0x9203
--#define QCA808X_PHY_MMD3_DEBUG_2		0xa101
--#define QCA808X_MMD3_DEBUG_2_VALUE		0x48ad
--#define QCA808X_PHY_MMD3_DEBUG_3		0xa103
--#define QCA808X_MMD3_DEBUG_3_VALUE		0x1698
--#define QCA808X_PHY_MMD3_DEBUG_4		0xa105
--#define QCA808X_MMD3_DEBUG_4_VALUE		0x8001
--#define QCA808X_PHY_MMD3_DEBUG_5		0xa106
--#define QCA808X_MMD3_DEBUG_5_VALUE		0x1111
--#define QCA808X_PHY_MMD3_DEBUG_6		0xa011
--#define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
--
--/* master/slave seed config */
--#define QCA808X_PHY_DEBUG_LOCAL_SEED		9
--#define QCA808X_MASTER_SLAVE_SEED_ENABLE	BIT(1)
--#define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
--#define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
--
--/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
-- * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
-- */
--#define QCA808X_DBG_AN_TEST			0xb
--#define QCA808X_HIBERNATION_EN			BIT(15)
--
--#define QCA808X_CDT_ENABLE_TEST			BIT(15)
--#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
--#define QCA808X_CDT_STATUS			BIT(11)
--#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
--
--#define QCA808X_MMD3_CDT_STATUS			0x8064
--#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
--#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
--#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
--#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
--#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
--#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
--
--#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
--#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
--#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
--#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
--
--#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
--#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
--#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
--#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
--#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
--
--#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
--#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
--#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
--#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
--
--/* NORMAL are MDI with type set to 0 */
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
--									 QCA808X_CDT_STATUS_STAT_MDI1)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
--									 QCA808X_CDT_STATUS_STAT_MDI1)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
--									 QCA808X_CDT_STATUS_STAT_MDI2)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
--									 QCA808X_CDT_STATUS_STAT_MDI2)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
--									 QCA808X_CDT_STATUS_STAT_MDI3)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
--									 QCA808X_CDT_STATUS_STAT_MDI3)
--
--/* Added for reference of existence but should be handled by wait_for_completion already */
--#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
--
--#define QCA808X_MMD7_LED_GLOBAL			0x8073
--#define QCA808X_LED_BLINK_1			GENMASK(11, 6)
--#define QCA808X_LED_BLINK_2			GENMASK(5, 0)
--/* Values are the same for both BLINK_1 and BLINK_2 */
--#define QCA808X_LED_BLINK_FREQ_MASK		GENMASK(5, 3)
--#define QCA808X_LED_BLINK_FREQ_2HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
--#define QCA808X_LED_BLINK_FREQ_4HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
--#define QCA808X_LED_BLINK_FREQ_8HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
--#define QCA808X_LED_BLINK_FREQ_16HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
--#define QCA808X_LED_BLINK_FREQ_32HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
--#define QCA808X_LED_BLINK_FREQ_64HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
--#define QCA808X_LED_BLINK_FREQ_128HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
--#define QCA808X_LED_BLINK_FREQ_256HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
--#define QCA808X_LED_BLINK_DUTY_MASK		GENMASK(2, 0)
--#define QCA808X_LED_BLINK_DUTY_50_50		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
--#define QCA808X_LED_BLINK_DUTY_75_25		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
--#define QCA808X_LED_BLINK_DUTY_25_75		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
--#define QCA808X_LED_BLINK_DUTY_33_67		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
--#define QCA808X_LED_BLINK_DUTY_67_33		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
--#define QCA808X_LED_BLINK_DUTY_17_83		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
--#define QCA808X_LED_BLINK_DUTY_83_17		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
--#define QCA808X_LED_BLINK_DUTY_8_92		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
--
--#define QCA808X_MMD7_LED2_CTRL			0x8074
--#define QCA808X_MMD7_LED2_FORCE_CTRL		0x8075
--#define QCA808X_MMD7_LED1_CTRL			0x8076
--#define QCA808X_MMD7_LED1_FORCE_CTRL		0x8077
--#define QCA808X_MMD7_LED0_CTRL			0x8078
--#define QCA808X_MMD7_LED_CTRL(x)		(0x8078 - ((x) * 2))
--
--/* LED hw control pattern is the same for every LED */
--#define QCA808X_LED_PATTERN_MASK		GENMASK(15, 0)
--#define QCA808X_LED_SPEED2500_ON		BIT(15)
--#define QCA808X_LED_SPEED2500_BLINK		BIT(14)
--/* Follow blink trigger even if duplex or speed condition doesn't match */
--#define QCA808X_LED_BLINK_CHECK_BYPASS		BIT(13)
--#define QCA808X_LED_FULL_DUPLEX_ON		BIT(12)
--#define QCA808X_LED_HALF_DUPLEX_ON		BIT(11)
--#define QCA808X_LED_TX_BLINK			BIT(10)
--#define QCA808X_LED_RX_BLINK			BIT(9)
--#define QCA808X_LED_TX_ON_10MS			BIT(8)
--#define QCA808X_LED_RX_ON_10MS			BIT(7)
--#define QCA808X_LED_SPEED1000_ON		BIT(6)
--#define QCA808X_LED_SPEED100_ON			BIT(5)
--#define QCA808X_LED_SPEED10_ON			BIT(4)
--#define QCA808X_LED_COLLISION_BLINK		BIT(3)
--#define QCA808X_LED_SPEED1000_BLINK		BIT(2)
--#define QCA808X_LED_SPEED100_BLINK		BIT(1)
--#define QCA808X_LED_SPEED10_BLINK		BIT(0)
--
--#define QCA808X_MMD7_LED0_FORCE_CTRL		0x8079
--#define QCA808X_MMD7_LED_FORCE_CTRL(x)		(0x8079 - ((x) * 2))
--
--/* LED force ctrl is the same for every LED
-- * No documentation exist for this, not even internal one
-- * with NDA as QCOM gives only info about configuring
-- * hw control pattern rules and doesn't indicate any way
-- * to force the LED to specific mode.
-- * These define comes from reverse and testing and maybe
-- * lack of some info or some info are not entirely correct.
-- * For the basic LED control and hw control these finding
-- * are enough to support LED control in all the required APIs.
-- *
-- * On doing some comparison with implementation with qca807x,
-- * it was found that it's 1:1 equal to it and confirms all the
-- * reverse done. It was also found further specification with the
-- * force mode and the blink modes.
-- */
--#define QCA808X_LED_FORCE_EN			BIT(15)
--#define QCA808X_LED_FORCE_MODE_MASK		GENMASK(14, 13)
--#define QCA808X_LED_FORCE_BLINK_1		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
--#define QCA808X_LED_FORCE_BLINK_2		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
--#define QCA808X_LED_FORCE_ON			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
--#define QCA808X_LED_FORCE_OFF			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
--
--#define QCA808X_MMD7_LED_POLARITY_CTRL		0x901a
--/* QSDK sets by default 0x46 to this reg that sets BIT 6 for
-- * LED to active high. It's not clear what BIT 3 and BIT 4 does.
-- */
--#define QCA808X_LED_ACTIVE_HIGH			BIT(6)
--
--/* QCA808X 1G chip type */
--#define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
--#define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
--
--#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL	0x9072
--#define QCA8081_PHY_FIFO_RSTN			BIT(11)
--
--MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
--MODULE_AUTHOR("Matus Ujhelyi");
--MODULE_LICENSE("GPL");
--
--enum stat_access_type {
--	PHY,
--	MMD
--};
--
--struct at803x_hw_stat {
--	const char *string;
--	u8 reg;
--	u32 mask;
--	enum stat_access_type access_type;
--};
--
--static struct at803x_hw_stat qca83xx_hw_stats[] = {
--	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
--	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
--	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
--};
--
--struct at803x_ss_mask {
--	u16 speed_mask;
--	u8 speed_shift;
--};
--
--struct at803x_priv {
--	int flags;
--	u16 clk_25m_reg;
--	u16 clk_25m_mask;
--	u8 smarteee_lpi_tw_1g;
--	u8 smarteee_lpi_tw_100m;
--	bool is_fiber;
--	bool is_1000basex;
--	struct regulator_dev *vddio_rdev;
--	struct regulator_dev *vddh_rdev;
--	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
--	int led_polarity_mode;
--};
--
--struct at803x_context {
--	u16 bmcr;
--	u16 advertise;
--	u16 control1000;
--	u16 int_enable;
--	u16 smart_speed;
--	u16 led_control;
--};
--
--static int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data)
--{
--	int ret;
--
--	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
--	if (ret < 0)
--		return ret;
--
--	return phy_write(phydev, AT803X_DEBUG_DATA, data);
--}
--
--static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
--{
--	int ret;
--
--	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
--	if (ret < 0)
--		return ret;
--
--	return phy_read(phydev, AT803X_DEBUG_DATA);
--}
--
--static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
--				 u16 clear, u16 set)
--{
--	u16 val;
--	int ret;
--
--	ret = at803x_debug_reg_read(phydev, reg);
--	if (ret < 0)
--		return ret;
--
--	val = ret & 0xffff;
--	val &= ~clear;
--	val |= set;
--
--	return phy_write(phydev, AT803X_DEBUG_DATA, val);
--}
--
--static int at803x_write_page(struct phy_device *phydev, int page)
--{
--	int mask;
--	int set;
--
--	if (page == AT803X_PAGE_COPPER) {
--		set = AT803X_BT_BX_REG_SEL;
--		mask = 0;
--	} else {
--		set = 0;
--		mask = AT803X_BT_BX_REG_SEL;
--	}
--
--	return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set);
--}
--
--static int at803x_read_page(struct phy_device *phydev)
--{
--	int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG);
--
--	if (ccr < 0)
--		return ccr;
--
--	if (ccr & AT803X_BT_BX_REG_SEL)
--		return AT803X_PAGE_COPPER;
--
--	return AT803X_PAGE_FIBER;
--}
--
--static int at803x_enable_rx_delay(struct phy_device *phydev)
--{
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0,
--				     AT803X_DEBUG_RX_CLK_DLY_EN);
--}
--
--static int at803x_enable_tx_delay(struct phy_device *phydev)
--{
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0,
--				     AT803X_DEBUG_TX_CLK_DLY_EN);
--}
--
--static int at803x_disable_rx_delay(struct phy_device *phydev)
--{
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
--				     AT803X_DEBUG_RX_CLK_DLY_EN, 0);
--}
--
--static int at803x_disable_tx_delay(struct phy_device *phydev)
--{
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE,
--				     AT803X_DEBUG_TX_CLK_DLY_EN, 0);
--}
--
--/* save relevant PHY registers to private copy */
--static void at803x_context_save(struct phy_device *phydev,
--				struct at803x_context *context)
--{
--	context->bmcr = phy_read(phydev, MII_BMCR);
--	context->advertise = phy_read(phydev, MII_ADVERTISE);
--	context->control1000 = phy_read(phydev, MII_CTRL1000);
--	context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
--	context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
--	context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
--}
--
--/* restore relevant PHY registers from private copy */
--static void at803x_context_restore(struct phy_device *phydev,
--				   const struct at803x_context *context)
--{
--	phy_write(phydev, MII_BMCR, context->bmcr);
--	phy_write(phydev, MII_ADVERTISE, context->advertise);
--	phy_write(phydev, MII_CTRL1000, context->control1000);
--	phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
--	phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
--	phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
--}
--
--static int at803x_set_wol(struct phy_device *phydev,
--			  struct ethtool_wolinfo *wol)
--{
--	int ret, irq_enabled;
--
--	if (wol->wolopts & WAKE_MAGIC) {
--		struct net_device *ndev = phydev->attached_dev;
--		const u8 *mac;
--		unsigned int i;
--		static const unsigned int offsets[] = {
--			AT803X_LOC_MAC_ADDR_32_47_OFFSET,
--			AT803X_LOC_MAC_ADDR_16_31_OFFSET,
--			AT803X_LOC_MAC_ADDR_0_15_OFFSET,
--		};
--
--		if (!ndev)
--			return -ENODEV;
--
--		mac = (const u8 *)ndev->dev_addr;
--
--		if (!is_valid_ether_addr(mac))
--			return -EINVAL;
--
--		for (i = 0; i < 3; i++)
--			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
--				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
--
--		/* Enable WOL interrupt */
--		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
--		if (ret)
--			return ret;
--	} else {
--		/* Disable WOL interrupt */
--		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
--		if (ret)
--			return ret;
--	}
--
--	/* Clear WOL status */
--	ret = phy_read(phydev, AT803X_INTR_STATUS);
--	if (ret < 0)
--		return ret;
--
--	/* Check if there are other interrupts except for WOL triggered when PHY is
--	 * in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can
--	 * be passed up to the interrupt PIN.
--	 */
--	irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
--	if (irq_enabled < 0)
--		return irq_enabled;
--
--	irq_enabled &= ~AT803X_INTR_ENABLE_WOL;
--	if (ret & irq_enabled && !phy_polling_mode(phydev))
--		phy_trigger_machine(phydev);
--
--	return 0;
--}
--
--static void at803x_get_wol(struct phy_device *phydev,
--			   struct ethtool_wolinfo *wol)
--{
--	int value;
--
--	wol->supported = WAKE_MAGIC;
--	wol->wolopts = 0;
--
--	value = phy_read(phydev, AT803X_INTR_ENABLE);
--	if (value < 0)
--		return;
--
--	if (value & AT803X_INTR_ENABLE_WOL)
--		wol->wolopts |= WAKE_MAGIC;
--}
--
--static int qca83xx_get_sset_count(struct phy_device *phydev)
--{
--	return ARRAY_SIZE(qca83xx_hw_stats);
--}
--
--static void qca83xx_get_strings(struct phy_device *phydev, u8 *data)
--{
--	int i;
--
--	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) {
--		strscpy(data + i * ETH_GSTRING_LEN,
--			qca83xx_hw_stats[i].string, ETH_GSTRING_LEN);
--	}
--}
--
--static u64 qca83xx_get_stat(struct phy_device *phydev, int i)
--{
--	struct at803x_hw_stat stat = qca83xx_hw_stats[i];
--	struct at803x_priv *priv = phydev->priv;
--	int val;
--	u64 ret;
--
--	if (stat.access_type == MMD)
--		val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
--	else
--		val = phy_read(phydev, stat.reg);
--
--	if (val < 0) {
--		ret = U64_MAX;
--	} else {
--		val = val & stat.mask;
--		priv->stats[i] += val;
--		ret = priv->stats[i];
--	}
--
--	return ret;
--}
--
--static void qca83xx_get_stats(struct phy_device *phydev,
--			      struct ethtool_stats *stats, u64 *data)
--{
--	int i;
--
--	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++)
--		data[i] = qca83xx_get_stat(phydev, i);
--}
--
--static int at803x_suspend(struct phy_device *phydev)
--{
--	int value;
--	int wol_enabled;
--
--	value = phy_read(phydev, AT803X_INTR_ENABLE);
--	wol_enabled = value & AT803X_INTR_ENABLE_WOL;
--
--	if (wol_enabled)
--		value = BMCR_ISOLATE;
--	else
--		value = BMCR_PDOWN;
--
--	phy_modify(phydev, MII_BMCR, 0, value);
--
--	return 0;
--}
--
--static int at803x_resume(struct phy_device *phydev)
--{
--	return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
--}
--
--static int at803x_parse_dt(struct phy_device *phydev)
--{
--	struct device_node *node = phydev->mdio.dev.of_node;
--	struct at803x_priv *priv = phydev->priv;
--	u32 freq, strength, tw;
--	unsigned int sel;
--	int ret;
--
--	if (!IS_ENABLED(CONFIG_OF_MDIO))
--		return 0;
--
--	if (of_property_read_bool(node, "qca,disable-smarteee"))
--		priv->flags |= AT803X_DISABLE_SMARTEEE;
--
--	if (of_property_read_bool(node, "qca,disable-hibernation-mode"))
--		priv->flags |= AT803X_DISABLE_HIBERNATION_MODE;
--
--	if (!of_property_read_u32(node, "qca,smarteee-tw-us-1g", &tw)) {
--		if (!tw || tw > 255) {
--			phydev_err(phydev, "invalid qca,smarteee-tw-us-1g\n");
--			return -EINVAL;
--		}
--		priv->smarteee_lpi_tw_1g = tw;
--	}
--
--	if (!of_property_read_u32(node, "qca,smarteee-tw-us-100m", &tw)) {
--		if (!tw || tw > 255) {
--			phydev_err(phydev, "invalid qca,smarteee-tw-us-100m\n");
--			return -EINVAL;
--		}
--		priv->smarteee_lpi_tw_100m = tw;
--	}
--
--	ret = of_property_read_u32(node, "qca,clk-out-frequency", &freq);
--	if (!ret) {
--		switch (freq) {
--		case 25000000:
--			sel = AT803X_CLK_OUT_25MHZ_XTAL;
--			break;
--		case 50000000:
--			sel = AT803X_CLK_OUT_50MHZ_PLL;
--			break;
--		case 62500000:
--			sel = AT803X_CLK_OUT_62_5MHZ_PLL;
--			break;
--		case 125000000:
--			sel = AT803X_CLK_OUT_125MHZ_PLL;
--			break;
--		default:
--			phydev_err(phydev, "invalid qca,clk-out-frequency\n");
--			return -EINVAL;
--		}
--
--		priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel);
--		priv->clk_25m_mask |= AT803X_CLK_OUT_MASK;
--	}
--
--	ret = of_property_read_u32(node, "qca,clk-out-strength", &strength);
--	if (!ret) {
--		priv->clk_25m_mask |= AT803X_CLK_OUT_STRENGTH_MASK;
--		switch (strength) {
--		case AR803X_STRENGTH_FULL:
--			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_FULL;
--			break;
--		case AR803X_STRENGTH_HALF:
--			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_HALF;
--			break;
--		case AR803X_STRENGTH_QUARTER:
--			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_QUARTER;
--			break;
--		default:
--			phydev_err(phydev, "invalid qca,clk-out-strength\n");
--			return -EINVAL;
--		}
--	}
--
--	return 0;
--}
--
--static int at803x_probe(struct phy_device *phydev)
--{
--	struct device *dev = &phydev->mdio.dev;
--	struct at803x_priv *priv;
--	int ret;
--
--	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
--	if (!priv)
--		return -ENOMEM;
--
--	/* Init LED polarity mode to -1 */
--	priv->led_polarity_mode = -1;
--
--	phydev->priv = priv;
--
--	ret = at803x_parse_dt(phydev);
--	if (ret)
--		return ret;
--
--	return 0;
--}
--
--static int at803x_get_features(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--	int err;
--
--	err = genphy_read_abilities(phydev);
--	if (err)
--		return err;
--
--	if (phydev->drv->phy_id != ATH8031_PHY_ID)
--		return 0;
--
--	/* AR8031/AR8033 have different status registers
--	 * for copper and fiber operation. However, the
--	 * extended status register is the same for both
--	 * operation modes.
--	 *
--	 * As a result of that, ESTATUS_1000_XFULL is set
--	 * to 1 even when operating in copper TP mode.
--	 *
--	 * Remove this mode from the supported link modes
--	 * when not operating in 1000BaseX mode.
--	 */
--	if (!priv->is_1000basex)
--		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
--				   phydev->supported);
--
--	return 0;
--}
--
--static int at803x_smarteee_config(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--	u16 mask = 0, val = 0;
--	int ret;
--
--	if (priv->flags & AT803X_DISABLE_SMARTEEE)
--		return phy_modify_mmd(phydev, MDIO_MMD_PCS,
--				      AT803X_MMD3_SMARTEEE_CTL3,
--				      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN, 0);
--
--	if (priv->smarteee_lpi_tw_1g) {
--		mask |= 0xff00;
--		val |= priv->smarteee_lpi_tw_1g << 8;
--	}
--	if (priv->smarteee_lpi_tw_100m) {
--		mask |= 0x00ff;
--		val |= priv->smarteee_lpi_tw_100m;
--	}
--	if (!mask)
--		return 0;
--
--	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL1,
--			     mask, val);
--	if (ret)
--		return ret;
--
--	return phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL3,
--			      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN,
--			      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN);
--}
--
--static int at803x_clk_out_config(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--
--	if (!priv->clk_25m_mask)
--		return 0;
--
--	return phy_modify_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M,
--			      priv->clk_25m_mask, priv->clk_25m_reg);
--}
--
--static int at8031_pll_config(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--
--	/* The default after hardware reset is PLL OFF. After a soft reset, the
--	 * values are retained.
--	 */
--	if (priv->flags & AT803X_KEEP_PLL_ENABLED)
--		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
--					     0, AT803X_DEBUG_PLL_ON);
--	else
--		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
--					     AT803X_DEBUG_PLL_ON, 0);
--}
--
--static int at803x_hibernation_mode_config(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--
--	/* The default after hardware reset is hibernation mode enabled. After
--	 * software reset, the value is retained.
--	 */
--	if (!(priv->flags & AT803X_DISABLE_HIBERNATION_MODE))
--		return 0;
--
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
--					 AT803X_DEBUG_HIB_CTRL_PS_HIB_EN, 0);
--}
--
--static int at803x_config_init(struct phy_device *phydev)
--{
--	int ret;
--
--	/* The RX and TX delay default is:
--	 *   after HW reset: RX delay enabled and TX delay disabled
--	 *   after SW reset: RX delay enabled, while TX delay retains the
--	 *   value before reset.
--	 */
--	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
--	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
--		ret = at803x_enable_rx_delay(phydev);
--	else
--		ret = at803x_disable_rx_delay(phydev);
--	if (ret < 0)
--		return ret;
--
--	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
--	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
--		ret = at803x_enable_tx_delay(phydev);
--	else
--		ret = at803x_disable_tx_delay(phydev);
--	if (ret < 0)
--		return ret;
--
--	ret = at803x_smarteee_config(phydev);
--	if (ret < 0)
--		return ret;
--
--	ret = at803x_clk_out_config(phydev);
--	if (ret < 0)
--		return ret;
--
--	ret = at803x_hibernation_mode_config(phydev);
--	if (ret < 0)
--		return ret;
--
--	/* Ar803x extended next page bit is enabled by default. Cisco
--	 * multigig switches read this bit and attempt to negotiate 10Gbps
--	 * rates even if the next page bit is disabled. This is incorrect
--	 * behaviour but we still need to accommodate it. XNP is only needed
--	 * for 10Gbps support, so disable XNP.
--	 */
--	return phy_modify(phydev, MII_ADVERTISE, MDIO_AN_CTRL1_XNP, 0);
--}
--
--static int at803x_ack_interrupt(struct phy_device *phydev)
--{
--	int err;
--
--	err = phy_read(phydev, AT803X_INTR_STATUS);
--
--	return (err < 0) ? err : 0;
--}
--
--static int at803x_config_intr(struct phy_device *phydev)
--{
--	int err;
--	int value;
--
--	value = phy_read(phydev, AT803X_INTR_ENABLE);
--
--	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
--		/* Clear any pending interrupts */
--		err = at803x_ack_interrupt(phydev);
--		if (err)
--			return err;
--
--		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
--		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
--		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
--		value |= AT803X_INTR_ENABLE_LINK_FAIL;
--		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
--
--		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
--	} else {
--		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
--		if (err)
--			return err;
--
--		/* Clear any pending interrupts */
--		err = at803x_ack_interrupt(phydev);
--	}
--
--	return err;
--}
--
--static irqreturn_t at803x_handle_interrupt(struct phy_device *phydev)
--{
--	int irq_status, int_enabled;
--
--	irq_status = phy_read(phydev, AT803X_INTR_STATUS);
--	if (irq_status < 0) {
--		phy_error(phydev);
--		return IRQ_NONE;
--	}
--
--	/* Read the current enabled interrupts */
--	int_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
--	if (int_enabled < 0) {
--		phy_error(phydev);
--		return IRQ_NONE;
--	}
--
--	/* See if this was one of our enabled interrupts */
--	if (!(irq_status & int_enabled))
--		return IRQ_NONE;
--
--	phy_trigger_machine(phydev);
--
--	return IRQ_HANDLED;
--}
--
--static void at803x_link_change_notify(struct phy_device *phydev)
--{
--	/*
--	 * Conduct a hardware reset for AT8030 every time a link loss is
--	 * signalled. This is necessary to circumvent a hardware bug that
--	 * occurs when the cable is unplugged while TX packets are pending
--	 * in the FIFO. In such cases, the FIFO enters an error mode it
--	 * cannot recover from by software.
--	 */
--	if (phydev->state == PHY_NOLINK && phydev->mdio.reset_gpio) {
--		struct at803x_context context;
--
--		at803x_context_save(phydev, &context);
--
--		phy_device_reset(phydev, 1);
--		usleep_range(1000, 2000);
--		phy_device_reset(phydev, 0);
--		usleep_range(1000, 2000);
--
--		at803x_context_restore(phydev, &context);
--
--		phydev_dbg(phydev, "%s(): phy was reset\n", __func__);
--	}
--}
--
--static int at803x_read_specific_status(struct phy_device *phydev,
--				       struct at803x_ss_mask ss_mask)
--{
--	int ss;
--
--	/* Read the AT8035 PHY-Specific Status register, which indicates the
--	 * speed and duplex that the PHY is actually using, irrespective of
--	 * whether we are in autoneg mode or not.
--	 */
--	ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
--	if (ss < 0)
--		return ss;
--
--	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
--		int sfc, speed;
--
--		sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL);
--		if (sfc < 0)
--			return sfc;
--
--		speed = ss & ss_mask.speed_mask;
--		speed >>= ss_mask.speed_shift;
--
--		switch (speed) {
--		case AT803X_SS_SPEED_10:
--			phydev->speed = SPEED_10;
--			break;
--		case AT803X_SS_SPEED_100:
--			phydev->speed = SPEED_100;
--			break;
--		case AT803X_SS_SPEED_1000:
--			phydev->speed = SPEED_1000;
--			break;
--		case QCA808X_SS_SPEED_2500:
--			phydev->speed = SPEED_2500;
--			break;
--		}
--		if (ss & AT803X_SS_DUPLEX)
--			phydev->duplex = DUPLEX_FULL;
--		else
--			phydev->duplex = DUPLEX_HALF;
--
--		if (ss & AT803X_SS_MDIX)
--			phydev->mdix = ETH_TP_MDI_X;
--		else
--			phydev->mdix = ETH_TP_MDI;
--
--		switch (FIELD_GET(AT803X_SFC_MDI_CROSSOVER_MODE_M, sfc)) {
--		case AT803X_SFC_MANUAL_MDI:
--			phydev->mdix_ctrl = ETH_TP_MDI;
--			break;
--		case AT803X_SFC_MANUAL_MDIX:
--			phydev->mdix_ctrl = ETH_TP_MDI_X;
--			break;
--		case AT803X_SFC_AUTOMATIC_CROSSOVER:
--			phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
--			break;
--		}
--	}
--
--	return 0;
--}
--
--static int at803x_read_status(struct phy_device *phydev)
--{
--	struct at803x_ss_mask ss_mask = { 0 };
--	int err, old_link = phydev->link;
--
--	/* Update the link, but return if there was an error */
--	err = genphy_update_link(phydev);
--	if (err)
--		return err;
--
--	/* why bother the PHY if nothing can have changed */
--	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
--		return 0;
--
--	phydev->speed = SPEED_UNKNOWN;
--	phydev->duplex = DUPLEX_UNKNOWN;
--	phydev->pause = 0;
--	phydev->asym_pause = 0;
--
--	err = genphy_read_lpa(phydev);
--	if (err < 0)
--		return err;
--
--	ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
--	ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
--	err = at803x_read_specific_status(phydev, ss_mask);
--	if (err < 0)
--		return err;
--
--	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
--		phy_resolve_aneg_pause(phydev);
--
--	return 0;
--}
--
--static int at803x_config_mdix(struct phy_device *phydev, u8 ctrl)
--{
--	u16 val;
--
--	switch (ctrl) {
--	case ETH_TP_MDI:
--		val = AT803X_SFC_MANUAL_MDI;
--		break;
--	case ETH_TP_MDI_X:
--		val = AT803X_SFC_MANUAL_MDIX;
--		break;
--	case ETH_TP_MDI_AUTO:
--		val = AT803X_SFC_AUTOMATIC_CROSSOVER;
--		break;
--	default:
--		return 0;
--	}
--
--	return phy_modify_changed(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL,
--			  AT803X_SFC_MDI_CROSSOVER_MODE_M,
--			  FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val));
--}
--
--static int at803x_prepare_config_aneg(struct phy_device *phydev)
--{
--	int ret;
--
--	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
--	if (ret < 0)
--		return ret;
--
--	/* Changes of the midx bits are disruptive to the normal operation;
--	 * therefore any changes to these registers must be followed by a
--	 * software reset to take effect.
--	 */
--	if (ret == 1) {
--		ret = genphy_soft_reset(phydev);
--		if (ret < 0)
--			return ret;
--	}
--
--	return 0;
--}
--
--static int at803x_config_aneg(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--	int ret;
--
--	ret = at803x_prepare_config_aneg(phydev);
--	if (ret)
--		return ret;
--
--	if (priv->is_1000basex)
--		return genphy_c37_config_aneg(phydev);
--
--	return genphy_config_aneg(phydev);
--}
--
--static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
--{
--	int val;
--
--	val = phy_read(phydev, AT803X_SMART_SPEED);
--	if (val < 0)
--		return val;
--
--	if (val & AT803X_SMART_SPEED_ENABLE)
--		*d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2;
--	else
--		*d = DOWNSHIFT_DEV_DISABLE;
--
--	return 0;
--}
--
--static int at803x_set_downshift(struct phy_device *phydev, u8 cnt)
--{
--	u16 mask, set;
--	int ret;
--
--	switch (cnt) {
--	case DOWNSHIFT_DEV_DEFAULT_COUNT:
--		cnt = AT803X_DEFAULT_DOWNSHIFT;
--		fallthrough;
--	case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT:
--		set = AT803X_SMART_SPEED_ENABLE |
--		      AT803X_SMART_SPEED_BYPASS_TIMER |
--		      FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2);
--		mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK;
--		break;
--	case DOWNSHIFT_DEV_DISABLE:
--		set = 0;
--		mask = AT803X_SMART_SPEED_ENABLE |
--		       AT803X_SMART_SPEED_BYPASS_TIMER;
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set);
--
--	/* After changing the smart speed settings, we need to perform a
--	 * software reset, use phy_init_hw() to make sure we set the
--	 * reapply any values which might got lost during software reset.
--	 */
--	if (ret == 1)
--		ret = phy_init_hw(phydev);
--
--	return ret;
--}
--
--static int at803x_get_tunable(struct phy_device *phydev,
--			      struct ethtool_tunable *tuna, void *data)
--{
--	switch (tuna->id) {
--	case ETHTOOL_PHY_DOWNSHIFT:
--		return at803x_get_downshift(phydev, data);
--	default:
--		return -EOPNOTSUPP;
--	}
--}
--
--static int at803x_set_tunable(struct phy_device *phydev,
--			      struct ethtool_tunable *tuna, const void *data)
--{
--	switch (tuna->id) {
--	case ETHTOOL_PHY_DOWNSHIFT:
--		return at803x_set_downshift(phydev, *(const u8 *)data);
--	default:
--		return -EOPNOTSUPP;
--	}
--}
--
--static int at803x_cable_test_result_trans(u16 status)
--{
--	switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
--	case AT803X_CDT_STATUS_STAT_NORMAL:
--		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
--	case AT803X_CDT_STATUS_STAT_SHORT:
--		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
--	case AT803X_CDT_STATUS_STAT_OPEN:
--		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
--	case AT803X_CDT_STATUS_STAT_FAIL:
--	default:
--		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
--	}
--}
--
--static bool at803x_cdt_test_failed(u16 status)
--{
--	return FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status) ==
--		AT803X_CDT_STATUS_STAT_FAIL;
--}
--
--static bool at803x_cdt_fault_length_valid(u16 status)
--{
--	switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
--	case AT803X_CDT_STATUS_STAT_OPEN:
--	case AT803X_CDT_STATUS_STAT_SHORT:
--		return true;
--	}
--	return false;
--}
--
--static int at803x_cdt_fault_length(int dt)
--{
--	/* According to the datasheet the distance to the fault is
--	 * DELTA_TIME * 0.824 meters.
--	 *
--	 * The author suspect the correct formula is:
--	 *
--	 *   fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2
--	 *
--	 * where c is the speed of light, VF is the velocity factor of
--	 * the twisted pair cable, 125MHz the counter frequency and
--	 * we need to divide by 2 because the hardware will measure the
--	 * round trip time to the fault and back to the PHY.
--	 *
--	 * With a VF of 0.69 we get the factor 0.824 mentioned in the
--	 * datasheet.
--	 */
--	return (dt * 824) / 10;
--}
--
--static int at803x_cdt_start(struct phy_device *phydev,
--			    u32 cdt_start)
--{
--	return phy_write(phydev, AT803X_CDT, cdt_start);
--}
--
--static int at803x_cdt_wait_for_completion(struct phy_device *phydev,
--					  u32 cdt_en)
--{
--	int val, ret;
--
--	/* One test run takes about 25ms */
--	ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
--				    !(val & cdt_en),
--				    30000, 100000, true);
--
--	return ret < 0 ? ret : 0;
--}
--
--static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair)
--{
--	static const int ethtool_pair[] = {
--		ETHTOOL_A_CABLE_PAIR_A,
--		ETHTOOL_A_CABLE_PAIR_B,
--		ETHTOOL_A_CABLE_PAIR_C,
--		ETHTOOL_A_CABLE_PAIR_D,
--	};
--	int ret, val;
--
--	val = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
--	      AT803X_CDT_ENABLE_TEST;
--	ret = at803x_cdt_start(phydev, val);
--	if (ret)
--		return ret;
--
--	ret = at803x_cdt_wait_for_completion(phydev, AT803X_CDT_ENABLE_TEST);
--	if (ret)
--		return ret;
--
--	val = phy_read(phydev, AT803X_CDT_STATUS);
--	if (val < 0)
--		return val;
--
--	if (at803x_cdt_test_failed(val))
--		return 0;
--
--	ethnl_cable_test_result(phydev, ethtool_pair[pair],
--				at803x_cable_test_result_trans(val));
--
--	if (at803x_cdt_fault_length_valid(val)) {
--		val = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, val);
--		ethnl_cable_test_fault_length(phydev, ethtool_pair[pair],
--					      at803x_cdt_fault_length(val));
--	}
--
--	return 1;
--}
--
--static int at803x_cable_test_get_status(struct phy_device *phydev,
--					bool *finished, unsigned long pair_mask)
--{
--	int retries = 20;
--	int pair, ret;
--
--	*finished = false;
--
--	/* According to the datasheet the CDT can be performed when
--	 * there is no link partner or when the link partner is
--	 * auto-negotiating. Starting the test will restart the AN
--	 * automatically. It seems that doing this repeatedly we will
--	 * get a slot where our link partner won't disturb our
--	 * measurement.
--	 */
--	while (pair_mask && retries--) {
--		for_each_set_bit(pair, &pair_mask, 4) {
--			ret = at803x_cable_test_one_pair(phydev, pair);
--			if (ret < 0)
--				return ret;
--			if (ret)
--				clear_bit(pair, &pair_mask);
--		}
--		if (pair_mask)
--			msleep(250);
--	}
--
--	*finished = true;
--
--	return 0;
--}
--
--static void at803x_cable_test_autoneg(struct phy_device *phydev)
--{
--	/* Enable auto-negotiation, but advertise no capabilities, no link
--	 * will be established. A restart of the auto-negotiation is not
--	 * required, because the cable test will automatically break the link.
--	 */
--	phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
--	phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
--}
--
--static int at803x_cable_test_start(struct phy_device *phydev)
--{
--	at803x_cable_test_autoneg(phydev);
--	/* we do all the (time consuming) work later */
--	return 0;
--}
--
--static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev,
--					    unsigned int selector)
--{
--	struct phy_device *phydev = rdev_get_drvdata(rdev);
--
--	if (selector)
--		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
--					     0, AT803X_DEBUG_RGMII_1V8);
--	else
--		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
--					     AT803X_DEBUG_RGMII_1V8, 0);
--}
--
--static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev)
--{
--	struct phy_device *phydev = rdev_get_drvdata(rdev);
--	int val;
--
--	val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F);
--	if (val < 0)
--		return val;
--
--	return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0;
--}
--
--static const struct regulator_ops vddio_regulator_ops = {
--	.list_voltage = regulator_list_voltage_table,
--	.set_voltage_sel = at8031_rgmii_reg_set_voltage_sel,
--	.get_voltage_sel = at8031_rgmii_reg_get_voltage_sel,
--};
--
--static const unsigned int vddio_voltage_table[] = {
--	1500000,
--	1800000,
--};
--
--static const struct regulator_desc vddio_desc = {
--	.name = "vddio",
--	.of_match = of_match_ptr("vddio-regulator"),
--	.n_voltages = ARRAY_SIZE(vddio_voltage_table),
--	.volt_table = vddio_voltage_table,
--	.ops = &vddio_regulator_ops,
--	.type = REGULATOR_VOLTAGE,
--	.owner = THIS_MODULE,
--};
--
--static const struct regulator_ops vddh_regulator_ops = {
--};
--
--static const struct regulator_desc vddh_desc = {
--	.name = "vddh",
--	.of_match = of_match_ptr("vddh-regulator"),
--	.n_voltages = 1,
--	.fixed_uV = 2500000,
--	.ops = &vddh_regulator_ops,
--	.type = REGULATOR_VOLTAGE,
--	.owner = THIS_MODULE,
--};
--
--static int at8031_register_regulators(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--	struct device *dev = &phydev->mdio.dev;
--	struct regulator_config config = { };
--
--	config.dev = dev;
--	config.driver_data = phydev;
--
--	priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config);
--	if (IS_ERR(priv->vddio_rdev)) {
--		phydev_err(phydev, "failed to register VDDIO regulator\n");
--		return PTR_ERR(priv->vddio_rdev);
--	}
--
--	priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config);
--	if (IS_ERR(priv->vddh_rdev)) {
--		phydev_err(phydev, "failed to register VDDH regulator\n");
--		return PTR_ERR(priv->vddh_rdev);
--	}
--
--	return 0;
--}
--
--static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
--{
--	struct phy_device *phydev = upstream;
--	__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
--	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
--	DECLARE_PHY_INTERFACE_MASK(interfaces);
--	phy_interface_t iface;
--
--	linkmode_zero(phy_support);
--	phylink_set(phy_support, 1000baseX_Full);
--	phylink_set(phy_support, 1000baseT_Full);
--	phylink_set(phy_support, Autoneg);
--	phylink_set(phy_support, Pause);
--	phylink_set(phy_support, Asym_Pause);
--
--	linkmode_zero(sfp_support);
--	sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces);
--	/* Some modules support 10G modes as well as others we support.
--	 * Mask out non-supported modes so the correct interface is picked.
--	 */
--	linkmode_and(sfp_support, phy_support, sfp_support);
--
--	if (linkmode_empty(sfp_support)) {
--		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
--		return -EINVAL;
--	}
--
--	iface = sfp_select_interface(phydev->sfp_bus, sfp_support);
--
--	/* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes
--	 * interface for use with SFP modules.
--	 * However, some copper modules detected as having a preferred SGMII
--	 * interface do default to and function in 1000Base-X mode, so just
--	 * print a warning and allow such modules, as they may have some chance
--	 * of working.
--	 */
--	if (iface == PHY_INTERFACE_MODE_SGMII)
--		dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n");
--	else if (iface != PHY_INTERFACE_MODE_1000BASEX)
--		return -EINVAL;
--
--	return 0;
--}
--
--static const struct sfp_upstream_ops at8031_sfp_ops = {
--	.attach = phy_sfp_attach,
--	.detach = phy_sfp_detach,
--	.module_insert = at8031_sfp_insert,
--};
--
--static int at8031_parse_dt(struct phy_device *phydev)
--{
--	struct device_node *node = phydev->mdio.dev.of_node;
--	struct at803x_priv *priv = phydev->priv;
--	int ret;
--
--	if (of_property_read_bool(node, "qca,keep-pll-enabled"))
--		priv->flags |= AT803X_KEEP_PLL_ENABLED;
--
--	ret = at8031_register_regulators(phydev);
--	if (ret < 0)
--		return ret;
--
--	ret = devm_regulator_get_enable_optional(&phydev->mdio.dev,
--						 "vddio");
--	if (ret) {
--		phydev_err(phydev, "failed to get VDDIO regulator\n");
--		return ret;
--	}
--
--	/* Only AR8031/8033 support 1000Base-X for SFP modules */
--	return phy_sfp_probe(phydev, &at8031_sfp_ops);
--}
--
--static int at8031_probe(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--	int mode_cfg;
--	int ccr;
--	int ret;
--
--	ret = at803x_probe(phydev);
--	if (ret)
--		return ret;
--
--	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
--	 * options.
--	 */
--	ret = at8031_parse_dt(phydev);
--	if (ret)
--		return ret;
--
--	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
--	if (ccr < 0)
--		return ccr;
--	mode_cfg = ccr & AT803X_MODE_CFG_MASK;
--
--	switch (mode_cfg) {
--	case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
--	case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
--		priv->is_1000basex = true;
--		fallthrough;
--	case AT803X_MODE_CFG_FX100_RGMII_50OHM:
--	case AT803X_MODE_CFG_FX100_RGMII_75OHM:
--		priv->is_fiber = true;
--		break;
--	}
--
--	/* Disable WoL in 1588 register which is enabled
--	 * by default
--	 */
--	return phy_modify_mmd(phydev, MDIO_MMD_PCS,
--			      AT803X_PHY_MMD3_WOL_CTRL,
--			      AT803X_WOL_EN, 0);
--}
--
--static int at8031_config_init(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--	int ret;
--
--	/* Some bootloaders leave the fiber page selected.
--	 * Switch to the appropriate page (fiber or copper), as otherwise we
--	 * read the PHY capabilities from the wrong page.
--	 */
--	phy_lock_mdio_bus(phydev);
--	ret = at803x_write_page(phydev,
--				priv->is_fiber ? AT803X_PAGE_FIBER :
--						 AT803X_PAGE_COPPER);
--	phy_unlock_mdio_bus(phydev);
--	if (ret)
--		return ret;
--
--	ret = at8031_pll_config(phydev);
--	if (ret < 0)
--		return ret;
--
--	return at803x_config_init(phydev);
--}
--
--static int at8031_set_wol(struct phy_device *phydev,
--			  struct ethtool_wolinfo *wol)
--{
--	int ret;
--
--	/* First setup MAC address and enable WOL interrupt */
--	ret = at803x_set_wol(phydev, wol);
--	if (ret)
--		return ret;
--
--	if (wol->wolopts & WAKE_MAGIC)
--		/* Enable WOL function for 1588 */
--		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
--				     AT803X_PHY_MMD3_WOL_CTRL,
--				     0, AT803X_WOL_EN);
--	else
--		/* Disable WoL function for 1588 */
--		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
--				     AT803X_PHY_MMD3_WOL_CTRL,
--				     AT803X_WOL_EN, 0);
--
--	return ret;
--}
--
--static int at8031_config_intr(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--	int err, value = 0;
--
--	if (phydev->interrupts == PHY_INTERRUPT_ENABLED &&
--	    priv->is_fiber) {
--		/* Clear any pending interrupts */
--		err = at803x_ack_interrupt(phydev);
--		if (err)
--			return err;
--
--		value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
--		value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
--
--		err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value);
--		if (err)
--			return err;
--	}
--
--	return at803x_config_intr(phydev);
--}
--
--/* AR8031 and AR8033 share the same read status logic */
--static int at8031_read_status(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--
--	if (priv->is_1000basex)
--		return genphy_c37_read_status(phydev);
--
--	return at803x_read_status(phydev);
--}
--
--/* AR8031 and AR8035 share the same cable test get status reg */
--static int at8031_cable_test_get_status(struct phy_device *phydev,
--					bool *finished)
--{
--	return at803x_cable_test_get_status(phydev, finished, 0xf);
--}
--
--/* AR8031 and AR8035 share the same cable test start logic */
--static int at8031_cable_test_start(struct phy_device *phydev)
--{
--	at803x_cable_test_autoneg(phydev);
--	phy_write(phydev, MII_CTRL1000, 0);
--	/* we do all the (time consuming) work later */
--	return 0;
--}
--
--/* AR8032, AR9331 and QCA9561 share the same cable test get status reg */
--static int at8032_cable_test_get_status(struct phy_device *phydev,
--					bool *finished)
--{
--	return at803x_cable_test_get_status(phydev, finished, 0x3);
--}
--
--static int at8035_parse_dt(struct phy_device *phydev)
--{
--	struct at803x_priv *priv = phydev->priv;
--
--	/* Mask is set by the generic at803x_parse_dt
--	 * if property is set. Assume property is set
--	 * with the mask not zero.
--	 */
--	if (priv->clk_25m_mask) {
--		/* Fixup for the AR8030/AR8035. This chip has another mask and
--		 * doesn't support the DSP reference. Eg. the lowest bit of the
--		 * mask. The upper two bits select the same frequencies. Mask
--		 * the lowest bit here.
--		 *
--		 * Warning:
--		 *   There was no datasheet for the AR8030 available so this is
--		 *   just a guess. But the AR8035 is listed as pin compatible
--		 *   to the AR8030 so there might be a good chance it works on
--		 *   the AR8030 too.
--		 */
--		priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
--		priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
--	}
--
--	return 0;
--}
--
--/* AR8030 and AR8035 shared the same special mask for clk_25m */
--static int at8035_probe(struct phy_device *phydev)
--{
--	int ret;
--
--	ret = at803x_probe(phydev);
--	if (ret)
--		return ret;
--
--	return at8035_parse_dt(phydev);
--}
--
--static int qca83xx_config_init(struct phy_device *phydev)
--{
--	u8 switch_revision;
--
--	switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
--
--	switch (switch_revision) {
--	case 1:
--		/* For 100M waveform */
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
--		/* Turn on Gigabit clock */
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
--		break;
--
--	case 2:
--		phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
--		fallthrough;
--	case 4:
--		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
--		break;
--	}
--
--	/* Following original QCA sourcecode set port to prefer master */
--	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
--
--	return 0;
--}
--
--static int qca8327_config_init(struct phy_device *phydev)
--{
--	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
--	 * Disable on init and enable only with 100m speed following
--	 * qca original source code.
--	 */
--	at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
--			      QCA8327_DEBUG_MANU_CTRL_EN, 0);
--
--	return qca83xx_config_init(phydev);
--}
--
--static void qca83xx_link_change_notify(struct phy_device *phydev)
--{
--	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
--	if (phydev->state == PHY_RUNNING) {
--		if (phydev->speed == SPEED_100)
--			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
--					      QCA8327_DEBUG_MANU_CTRL_EN,
--					      QCA8327_DEBUG_MANU_CTRL_EN);
--	} else {
--		/* Reset DAC Amplitude adjustment */
--		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
--				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
--	}
--}
--
--static int qca83xx_resume(struct phy_device *phydev)
--{
--	int ret, val;
--
--	/* Skip reset if not suspended */
--	if (!phydev->suspended)
--		return 0;
--
--	/* Reinit the port, reset values set by suspend */
--	qca83xx_config_init(phydev);
--
--	/* Reset the port on port resume */
--	phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
--
--	/* On resume from suspend the switch execute a reset and
--	 * restart auto-negotiation. Wait for reset to complete.
--	 */
--	ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
--				    50000, 600000, true);
--	if (ret)
--		return ret;
--
--	usleep_range(1000, 2000);
--
--	return 0;
--}
--
--static int qca83xx_suspend(struct phy_device *phydev)
--{
--	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
--			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
--
--	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
--			      AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
--			      AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
--
--	return 0;
--}
--
--static int qca8337_suspend(struct phy_device *phydev)
--{
--	/* Only QCA8337 support actual suspend. */
--	genphy_suspend(phydev);
--
--	return qca83xx_suspend(phydev);
--}
--
--static int qca8327_suspend(struct phy_device *phydev)
--{
--	u16 mask = 0;
--
--	/* QCA8327 cause port unreliability when phy suspend
--	 * is set.
--	 */
--	mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
--	phy_modify(phydev, MII_BMCR, mask, 0);
--
--	return qca83xx_suspend(phydev);
--}
--
--static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
--{
--	int ret;
--
--	/* Enable fast retrain */
--	ret = genphy_c45_fast_retrain(phydev, true);
--	if (ret)
--		return ret;
--
--	phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
--		      QCA808X_TOP_OPTION1_DATA);
--	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
--		      QCA808X_MSE_THRESHOLD_20DB_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
--		      QCA808X_MSE_THRESHOLD_17DB_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
--		      QCA808X_MSE_THRESHOLD_27DB_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
--		      QCA808X_MSE_THRESHOLD_28DB_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
--		      QCA808X_MMD3_DEBUG_1_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
--		      QCA808X_MMD3_DEBUG_4_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
--		      QCA808X_MMD3_DEBUG_5_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
--		      QCA808X_MMD3_DEBUG_3_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
--		      QCA808X_MMD3_DEBUG_6_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
--		      QCA808X_MMD3_DEBUG_2_VALUE);
--
--	return 0;
--}
--
--static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
--{
--	u16 seed_value;
--
--	if (!enable)
--		return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
--				QCA808X_MASTER_SLAVE_SEED_ENABLE, 0);
--
--	seed_value = prandom_u32_max(QCA808X_MASTER_SLAVE_SEED_RANGE);
--	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
--			QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE,
--			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) |
--			QCA808X_MASTER_SLAVE_SEED_ENABLE);
--}
--
--static bool qca808x_is_prefer_master(struct phy_device *phydev)
--{
--	return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) ||
--		(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
--}
--
--static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
--{
--	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
--}
--
--static int qca808x_config_init(struct phy_device *phydev)
--{
--	int ret;
--
--	/* Active adc&vga on 802.3az for the link 1000M and 100M */
--	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
--			     QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
--	if (ret)
--		return ret;
--
--	/* Adjust the threshold on 802.3az for the link 1000M */
--	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
--			    QCA808X_PHY_MMD3_AZ_TRAINING_CTRL,
--			    QCA808X_MMD3_AZ_TRAINING_VAL);
--	if (ret)
--		return ret;
--
--	if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
--		/* Config the fast retrain for the link 2500M */
--		ret = qca808x_phy_fast_retrain_config(phydev);
--		if (ret)
--			return ret;
--
--		ret = genphy_read_master_slave(phydev);
--		if (ret < 0)
--			return ret;
--
--		if (!qca808x_is_prefer_master(phydev)) {
--			/* Enable seed and configure lower ramdom seed to make phy
--			 * linked as slave mode.
--			 */
--			ret = qca808x_phy_ms_seed_enable(phydev, true);
--			if (ret)
--				return ret;
--		}
--	}
--
--	/* Configure adc threshold as 100mv for the link 10M */
--	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
--				     QCA808X_ADC_THRESHOLD_MASK,
--				     QCA808X_ADC_THRESHOLD_100MV);
--}
--
--static int qca808x_read_status(struct phy_device *phydev)
--{
--	struct at803x_ss_mask ss_mask = { 0 };
--	int ret;
--
--	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
--	if (ret < 0)
--		return ret;
--
--	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
--			 ret & MDIO_AN_10GBT_STAT_LP2_5G);
--
--	ret = genphy_read_status(phydev);
--	if (ret)
--		return ret;
--
--	/* qca8081 takes the different bits for speed value from at803x */
--	ss_mask.speed_mask = QCA808X_SS_SPEED_MASK;
--	ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK);
--	ret = at803x_read_specific_status(phydev, ss_mask);
--	if (ret < 0)
--		return ret;
--
--	if (phydev->link) {
--		if (phydev->speed == SPEED_2500)
--			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
--		else
--			phydev->interface = PHY_INTERFACE_MODE_SGMII;
--	} else {
--		/* generate seed as a lower random value to make PHY linked as SLAVE easily,
--		 * except for master/slave configuration fault detected or the master mode
--		 * preferred.
--		 *
--		 * the reason for not putting this code into the function link_change_notify is
--		 * the corner case where the link partner is also the qca8081 PHY and the seed
--		 * value is configured as the same value, the link can't be up and no link change
--		 * occurs.
--		 */
--		if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
--			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
--			    qca808x_is_prefer_master(phydev)) {
--				qca808x_phy_ms_seed_enable(phydev, false);
--			} else {
--				qca808x_phy_ms_seed_enable(phydev, true);
--			}
--		}
--	}
--
--	return 0;
--}
--
--static int qca808x_soft_reset(struct phy_device *phydev)
--{
--	int ret;
--
--	ret = genphy_soft_reset(phydev);
--	if (ret < 0)
--		return ret;
--
--	if (qca808x_has_fast_retrain_or_slave_seed(phydev))
--		ret = qca808x_phy_ms_seed_enable(phydev, true);
--
--	return ret;
--}
--
--static bool qca808x_cdt_fault_length_valid(int cdt_code)
--{
--	switch (cdt_code) {
--	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
--		return true;
--	default:
--		return false;
--	}
--}
--
--static int qca808x_cable_test_result_trans(int cdt_code)
--{
--	switch (cdt_code) {
--	case QCA808X_CDT_STATUS_STAT_NORMAL:
--		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
--	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
--		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
--	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
--		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
--		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
--	case QCA808X_CDT_STATUS_STAT_FAIL:
--	default:
--		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
--	}
--}
--
--static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
--				    int result)
--{
--	int val;
--	u32 cdt_length_reg = 0;
--
--	switch (pair) {
--	case ETHTOOL_A_CABLE_PAIR_A:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
--		break;
--	case ETHTOOL_A_CABLE_PAIR_B:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
--		break;
--	case ETHTOOL_A_CABLE_PAIR_C:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
--		break;
--	case ETHTOOL_A_CABLE_PAIR_D:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
--	if (val < 0)
--		return val;
--
--	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
--		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
--	else
--		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
--
--	return at803x_cdt_fault_length(val);
--}
--
--static int qca808x_cable_test_start(struct phy_device *phydev)
--{
--	int ret;
--
--	/* perform CDT with the following configs:
--	 * 1. disable hibernation.
--	 * 2. force PHY working in MDI mode.
--	 * 3. for PHY working in 1000BaseT.
--	 * 4. configure the threshold.
--	 */
--
--	ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
--	if (ret < 0)
--		return ret;
--
--	ret = at803x_config_mdix(phydev, ETH_TP_MDI);
--	if (ret < 0)
--		return ret;
--
--	/* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
--	phydev->duplex = DUPLEX_FULL;
--	phydev->speed = SPEED_1000;
--	ret = genphy_c45_pma_setup_forced(phydev);
--	if (ret < 0)
--		return ret;
--
--	ret = genphy_setup_forced(phydev);
--	if (ret < 0)
--		return ret;
--
--	/* configure the thresholds for open, short, pair ok test */
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
--
--	return 0;
--}
--
--static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
--					      u16 status)
--{
--	int length, result;
--	u16 pair_code;
--
--	switch (pair) {
--	case ETHTOOL_A_CABLE_PAIR_A:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
--		break;
--	case ETHTOOL_A_CABLE_PAIR_B:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
--		break;
--	case ETHTOOL_A_CABLE_PAIR_C:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
--		break;
--	case ETHTOOL_A_CABLE_PAIR_D:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	result = qca808x_cable_test_result_trans(pair_code);
--	ethnl_cable_test_result(phydev, pair, result);
--
--	if (qca808x_cdt_fault_length_valid(pair_code)) {
--		length = qca808x_cdt_fault_length(phydev, pair, result);
--		ethnl_cable_test_fault_length(phydev, pair, length);
--	}
--
--	return 0;
--}
--
--static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
--{
--	int ret, val;
--
--	*finished = false;
--
--	val = QCA808X_CDT_ENABLE_TEST |
--	      QCA808X_CDT_LENGTH_UNIT;
--	ret = at803x_cdt_start(phydev, val);
--	if (ret)
--		return ret;
--
--	ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
--	if (ret)
--		return ret;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
--	if (val < 0)
--		return val;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
--	if (ret)
--		return ret;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
--	if (ret)
--		return ret;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
--	if (ret)
--		return ret;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
--	if (ret)
--		return ret;
--
--	*finished = true;
--
--	return 0;
--}
--
--static int qca808x_get_features(struct phy_device *phydev)
--{
--	int ret;
--
--	ret = genphy_c45_pma_read_abilities(phydev);
--	if (ret)
--		return ret;
--
--	/* The autoneg ability is not existed in bit3 of MMD7.1,
--	 * but it is supported by qca808x PHY, so we add it here
--	 * manually.
--	 */
--	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
--
--	/* As for the qca8081 1G version chip, the 2500baseT ability is also
--	 * existed in the bit0 of MMD1.21, we need to remove it manually if
--	 * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
--	 */
--	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
--	if (ret < 0)
--		return ret;
--
--	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
--		linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
--
--	return 0;
--}
--
--static int qca808x_config_aneg(struct phy_device *phydev)
--{
--	int phy_ctrl = 0;
--	int ret;
--
--	ret = at803x_prepare_config_aneg(phydev);
--	if (ret)
--		return ret;
--
--	/* The reg MII_BMCR also needs to be configured for force mode, the
--	 * genphy_config_aneg is also needed.
--	 */
--	if (phydev->autoneg == AUTONEG_DISABLE)
--		genphy_c45_pma_setup_forced(phydev);
--
--	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
--		phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
--
--	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
--				     MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
--	if (ret < 0)
--		return ret;
--
--	return __genphy_config_aneg(phydev, ret);
--}
--
--static void qca808x_link_change_notify(struct phy_device *phydev)
--{
--	/* Assert interface sgmii fifo on link down, deassert it on link up,
--	 * the interface device address is always phy address added by 1.
--	 */
--	mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
--				   MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
--				   QCA8081_PHY_FIFO_RSTN,
--				   phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
--}
--
--static int qca808x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
--				    u16 *offload_trigger)
--{
--	/* Parsing specific to netdev trigger */
--	if (test_bit(TRIGGER_NETDEV_TX, &rules))
--		*offload_trigger |= QCA808X_LED_TX_BLINK;
--	if (test_bit(TRIGGER_NETDEV_RX, &rules))
--		*offload_trigger |= QCA808X_LED_RX_BLINK;
--	if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
--		*offload_trigger |= QCA808X_LED_SPEED10_ON;
--	if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
--		*offload_trigger |= QCA808X_LED_SPEED100_ON;
--	if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
--		*offload_trigger |= QCA808X_LED_SPEED1000_ON;
--	if (test_bit(TRIGGER_NETDEV_LINK_2500, &rules))
--		*offload_trigger |= QCA808X_LED_SPEED2500_ON;
--	if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
--		*offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
--	if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
--		*offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
--
--	if (rules && !*offload_trigger)
--		return -EOPNOTSUPP;
--
--	/* Enable BLINK_CHECK_BYPASS by default to make the LED
--	 * blink even with duplex or speed mode not enabled.
--	 */
--	*offload_trigger |= QCA808X_LED_BLINK_CHECK_BYPASS;
--
--	return 0;
--}
--
--static int qca808x_led_hw_control_enable(struct phy_device *phydev, u8 index)
--{
--	u16 reg;
--
--	if (index > 2)
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
--				  QCA808X_LED_FORCE_EN);
--}
--
--static int qca808x_led_hw_is_supported(struct phy_device *phydev, u8 index,
--				       unsigned long rules)
--{
--	u16 offload_trigger = 0;
--
--	if (index > 2)
--		return -EINVAL;
--
--	return qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
--}
--
--static int qca808x_led_hw_control_set(struct phy_device *phydev, u8 index,
--				      unsigned long rules)
--{
--	u16 reg, offload_trigger = 0;
--	int ret;
--
--	if (index > 2)
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_CTRL(index);
--
--	ret = qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
--	if (ret)
--		return ret;
--
--	ret = qca808x_led_hw_control_enable(phydev, index);
--	if (ret)
--		return ret;
--
--	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
--			      QCA808X_LED_PATTERN_MASK,
--			      offload_trigger);
--}
--
--static bool qca808x_led_hw_control_status(struct phy_device *phydev, u8 index)
--{
--	u16 reg;
--	int val;
--
--	if (index > 2)
--		return false;
--
--	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
--
--	return !(val & QCA808X_LED_FORCE_EN);
--}
--
--static int qca808x_led_hw_control_get(struct phy_device *phydev, u8 index,
--				      unsigned long *rules)
--{
--	u16 reg;
--	int val;
--
--	if (index > 2)
--		return -EINVAL;
--
--	/* Check if we have hw control enabled */
--	if (qca808x_led_hw_control_status(phydev, index))
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_CTRL(index);
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
--	if (val & QCA808X_LED_TX_BLINK)
--		set_bit(TRIGGER_NETDEV_TX, rules);
--	if (val & QCA808X_LED_RX_BLINK)
--		set_bit(TRIGGER_NETDEV_RX, rules);
--	if (val & QCA808X_LED_SPEED10_ON)
--		set_bit(TRIGGER_NETDEV_LINK_10, rules);
--	if (val & QCA808X_LED_SPEED100_ON)
--		set_bit(TRIGGER_NETDEV_LINK_100, rules);
--	if (val & QCA808X_LED_SPEED1000_ON)
--		set_bit(TRIGGER_NETDEV_LINK_1000, rules);
--	if (val & QCA808X_LED_SPEED2500_ON)
--		set_bit(TRIGGER_NETDEV_LINK_2500, rules);
--	if (val & QCA808X_LED_HALF_DUPLEX_ON)
--		set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
--	if (val & QCA808X_LED_FULL_DUPLEX_ON)
--		set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
--
--	return 0;
--}
--
--static int qca808x_led_hw_control_reset(struct phy_device *phydev, u8 index)
--{
--	u16 reg;
--
--	if (index > 2)
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_CTRL(index);
--
--	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
--				  QCA808X_LED_PATTERN_MASK);
--}
--
--static int qca808x_led_brightness_set(struct phy_device *phydev,
--				      u8 index, enum led_brightness value)
--{
--	u16 reg;
--	int ret;
--
--	if (index > 2)
--		return -EINVAL;
--
--	if (!value) {
--		ret = qca808x_led_hw_control_reset(phydev, index);
--		if (ret)
--			return ret;
--	}
--
--	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
--			      QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
--			      QCA808X_LED_FORCE_EN | value ? QCA808X_LED_FORCE_ON :
--							     QCA808X_LED_FORCE_OFF);
--}
--
--static int qca808x_led_blink_set(struct phy_device *phydev, u8 index,
--				 unsigned long *delay_on,
--				 unsigned long *delay_off)
--{
--	int ret;
--	u16 reg;
--
--	if (index > 2)
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	/* Set blink to 50% off, 50% on at 4Hz by default */
--	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
--			     QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
--			     QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
--	if (ret)
--		return ret;
--
--	/* We use BLINK_1 for normal blinking */
--	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
--			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
--			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
--	if (ret)
--		return ret;
--
--	/* We set blink to 4Hz, aka 250ms */
--	*delay_on = 250 / 2;
--	*delay_off = 250 / 2;
--
--	return 0;
--}
--
--static int qca808x_led_polarity_set(struct phy_device *phydev, int index,
--				    unsigned long modes)
--{
--	struct at803x_priv *priv = phydev->priv;
--	bool active_low = false;
--	u32 mode;
--
--	for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
--		switch (mode) {
--		case PHY_LED_ACTIVE_LOW:
--			active_low = true;
--			break;
--		default:
--			return -EINVAL;
--		}
--	}
--
--	/* PHY polarity is global and can't be set per LED.
--	 * To detect this, check if last requested polarity mode
--	 * match the new one.
--	 */
--	if (priv->led_polarity_mode >= 0 &&
--	    priv->led_polarity_mode != active_low) {
--		phydev_err(phydev, "PHY polarity is global. Mismatched polarity on different LED\n");
--		return -EINVAL;
--	}
--
--	/* Save the last PHY polarity mode */
--	priv->led_polarity_mode = active_low;
--
--	return phy_modify_mmd(phydev, MDIO_MMD_AN,
--			      QCA808X_MMD7_LED_POLARITY_CTRL,
--			      QCA808X_LED_ACTIVE_HIGH,
--			      active_low ? 0 : QCA808X_LED_ACTIVE_HIGH);
--}
--
--static struct phy_driver at803x_driver[] = {
--{
--	/* Qualcomm Atheros AR8035 */
--	PHY_ID_MATCH_EXACT(ATH8035_PHY_ID),
--	.name			= "Qualcomm Atheros AR8035",
--	.flags			= PHY_POLL_CABLE_TEST,
--	.probe			= at8035_probe,
--	.config_aneg		= at803x_config_aneg,
--	.config_init		= at803x_config_init,
--	.soft_reset		= genphy_soft_reset,
--	.set_wol		= at803x_set_wol,
--	.get_wol		= at803x_get_wol,
--	.suspend		= at803x_suspend,
--	.resume			= at803x_resume,
--	/* PHY_GBIT_FEATURES */
--	.read_status		= at803x_read_status,
--	.config_intr		= at803x_config_intr,
--	.handle_interrupt	= at803x_handle_interrupt,
--	.get_tunable		= at803x_get_tunable,
--	.set_tunable		= at803x_set_tunable,
--	.cable_test_start	= at8031_cable_test_start,
--	.cable_test_get_status	= at8031_cable_test_get_status,
--}, {
--	/* Qualcomm Atheros AR8030 */
--	.phy_id			= ATH8030_PHY_ID,
--	.name			= "Qualcomm Atheros AR8030",
--	.phy_id_mask		= AT8030_PHY_ID_MASK,
--	.probe			= at8035_probe,
--	.config_init		= at803x_config_init,
--	.link_change_notify	= at803x_link_change_notify,
--	.set_wol		= at803x_set_wol,
--	.get_wol		= at803x_get_wol,
--	.suspend		= at803x_suspend,
--	.resume			= at803x_resume,
--	/* PHY_BASIC_FEATURES */
--	.config_intr		= at803x_config_intr,
--	.handle_interrupt	= at803x_handle_interrupt,
--}, {
--	/* Qualcomm Atheros AR8031/AR8033 */
--	PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
--	.name			= "Qualcomm Atheros AR8031/AR8033",
--	.flags			= PHY_POLL_CABLE_TEST,
--	.probe			= at8031_probe,
--	.config_init		= at8031_config_init,
--	.config_aneg		= at803x_config_aneg,
--	.soft_reset		= genphy_soft_reset,
--	.set_wol		= at8031_set_wol,
--	.get_wol		= at803x_get_wol,
--	.suspend		= at803x_suspend,
--	.resume			= at803x_resume,
--	.read_page		= at803x_read_page,
--	.write_page		= at803x_write_page,
--	.get_features		= at803x_get_features,
--	.read_status		= at8031_read_status,
--	.config_intr		= at8031_config_intr,
--	.handle_interrupt	= at803x_handle_interrupt,
--	.get_tunable		= at803x_get_tunable,
--	.set_tunable		= at803x_set_tunable,
--	.cable_test_start	= at8031_cable_test_start,
--	.cable_test_get_status	= at8031_cable_test_get_status,
--}, {
--	/* Qualcomm Atheros AR8032 */
--	PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
--	.name			= "Qualcomm Atheros AR8032",
--	.probe			= at803x_probe,
--	.flags			= PHY_POLL_CABLE_TEST,
--	.config_init		= at803x_config_init,
--	.link_change_notify	= at803x_link_change_notify,
--	.suspend		= at803x_suspend,
--	.resume			= at803x_resume,
--	/* PHY_BASIC_FEATURES */
--	.config_intr		= at803x_config_intr,
--	.handle_interrupt	= at803x_handle_interrupt,
--	.cable_test_start	= at803x_cable_test_start,
--	.cable_test_get_status	= at8032_cable_test_get_status,
--}, {
--	/* ATHEROS AR9331 */
--	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
--	.name			= "Qualcomm Atheros AR9331 built-in PHY",
--	.probe			= at803x_probe,
--	.suspend		= at803x_suspend,
--	.resume			= at803x_resume,
--	.flags			= PHY_POLL_CABLE_TEST,
--	/* PHY_BASIC_FEATURES */
--	.config_intr		= at803x_config_intr,
--	.handle_interrupt	= at803x_handle_interrupt,
--	.cable_test_start	= at803x_cable_test_start,
--	.cable_test_get_status	= at8032_cable_test_get_status,
--	.read_status		= at803x_read_status,
--	.soft_reset		= genphy_soft_reset,
--	.config_aneg		= at803x_config_aneg,
--}, {
--	/* Qualcomm Atheros QCA9561 */
--	PHY_ID_MATCH_EXACT(QCA9561_PHY_ID),
--	.name			= "Qualcomm Atheros QCA9561 built-in PHY",
--	.probe			= at803x_probe,
--	.suspend		= at803x_suspend,
--	.resume			= at803x_resume,
--	.flags			= PHY_POLL_CABLE_TEST,
--	/* PHY_BASIC_FEATURES */
--	.config_intr		= at803x_config_intr,
--	.handle_interrupt	= at803x_handle_interrupt,
--	.cable_test_start	= at803x_cable_test_start,
--	.cable_test_get_status	= at8032_cable_test_get_status,
--	.read_status		= at803x_read_status,
--	.soft_reset		= genphy_soft_reset,
--	.config_aneg		= at803x_config_aneg,
--}, {
--	/* QCA8337 */
--	.phy_id			= QCA8337_PHY_ID,
--	.phy_id_mask		= QCA8K_PHY_ID_MASK,
--	.name			= "Qualcomm Atheros 8337 internal PHY",
--	/* PHY_GBIT_FEATURES */
--	.probe			= at803x_probe,
--	.flags			= PHY_IS_INTERNAL,
--	.config_init		= qca83xx_config_init,
--	.soft_reset		= genphy_soft_reset,
--	.get_sset_count		= qca83xx_get_sset_count,
--	.get_strings		= qca83xx_get_strings,
--	.get_stats		= qca83xx_get_stats,
--	.suspend		= qca8337_suspend,
--	.resume			= qca83xx_resume,
--}, {
--	/* QCA8327-A from switch QCA8327-AL1A */
--	.phy_id			= QCA8327_A_PHY_ID,
--	.phy_id_mask		= QCA8K_PHY_ID_MASK,
--	.name			= "Qualcomm Atheros 8327-A internal PHY",
--	/* PHY_GBIT_FEATURES */
--	.link_change_notify	= qca83xx_link_change_notify,
--	.probe			= at803x_probe,
--	.flags			= PHY_IS_INTERNAL,
--	.config_init		= qca8327_config_init,
--	.soft_reset		= genphy_soft_reset,
--	.get_sset_count		= qca83xx_get_sset_count,
--	.get_strings		= qca83xx_get_strings,
--	.get_stats		= qca83xx_get_stats,
--	.suspend		= qca8327_suspend,
--	.resume			= qca83xx_resume,
--}, {
--	/* QCA8327-B from switch QCA8327-BL1A */
--	.phy_id			= QCA8327_B_PHY_ID,
--	.phy_id_mask		= QCA8K_PHY_ID_MASK,
--	.name			= "Qualcomm Atheros 8327-B internal PHY",
--	/* PHY_GBIT_FEATURES */
--	.link_change_notify	= qca83xx_link_change_notify,
--	.probe			= at803x_probe,
--	.flags			= PHY_IS_INTERNAL,
--	.config_init		= qca8327_config_init,
--	.soft_reset		= genphy_soft_reset,
--	.get_sset_count		= qca83xx_get_sset_count,
--	.get_strings		= qca83xx_get_strings,
--	.get_stats		= qca83xx_get_stats,
--	.suspend		= qca8327_suspend,
--	.resume			= qca83xx_resume,
--}, {
--	/* Qualcomm QCA8081 */
--	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
--	.name			= "Qualcomm QCA8081",
--	.flags			= PHY_POLL_CABLE_TEST,
--	.probe			= at803x_probe,
--	.config_intr		= at803x_config_intr,
--	.handle_interrupt	= at803x_handle_interrupt,
--	.get_tunable		= at803x_get_tunable,
--	.set_tunable		= at803x_set_tunable,
--	.set_wol		= at803x_set_wol,
--	.get_wol		= at803x_get_wol,
--	.get_features		= qca808x_get_features,
--	.config_aneg		= qca808x_config_aneg,
--	.suspend		= genphy_suspend,
--	.resume			= genphy_resume,
--	.read_status		= qca808x_read_status,
--	.config_init		= qca808x_config_init,
--	.soft_reset		= qca808x_soft_reset,
--	.cable_test_start	= qca808x_cable_test_start,
--	.cable_test_get_status	= qca808x_cable_test_get_status,
--	.link_change_notify	= qca808x_link_change_notify,
--	.led_brightness_set	= qca808x_led_brightness_set,
--	.led_blink_set		= qca808x_led_blink_set,
--	.led_hw_is_supported	= qca808x_led_hw_is_supported,
--	.led_hw_control_set	= qca808x_led_hw_control_set,
--	.led_hw_control_get	= qca808x_led_hw_control_get,
--	.led_polarity_set	= qca808x_led_polarity_set,
--}, };
--
--module_phy_driver(at803x_driver);
--
--static struct mdio_device_id __maybe_unused atheros_tbl[] = {
--	{ ATH8030_PHY_ID, AT8030_PHY_ID_MASK },
--	{ PHY_ID_MATCH_EXACT(ATH8031_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
--	{ }
--};
--
--MODULE_DEVICE_TABLE(mdio, atheros_tbl);
---- /dev/null
-+++ b/drivers/net/phy/qcom/at803x.c
-@@ -0,0 +1,2759 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * drivers/net/phy/at803x.c
-+ *
-+ * Driver for Qualcomm Atheros AR803x PHY
-+ *
-+ * Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
-+ */
-+
-+#include <linux/phy.h>
-+#include <linux/module.h>
-+#include <linux/string.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/ethtool_netlink.h>
-+#include <linux/bitfield.h>
-+#include <linux/regulator/of_regulator.h>
-+#include <linux/regulator/driver.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/of.h>
-+#include <linux/phylink.h>
-+#include <linux/sfp.h>
-+#include <dt-bindings/net/qca-ar803x.h>
-+
-+#define AT803X_SPECIFIC_FUNCTION_CONTROL	0x10
-+#define AT803X_SFC_ASSERT_CRS			BIT(11)
-+#define AT803X_SFC_FORCE_LINK			BIT(10)
-+#define AT803X_SFC_MDI_CROSSOVER_MODE_M		GENMASK(6, 5)
-+#define AT803X_SFC_AUTOMATIC_CROSSOVER		0x3
-+#define AT803X_SFC_MANUAL_MDIX			0x1
-+#define AT803X_SFC_MANUAL_MDI			0x0
-+#define AT803X_SFC_SQE_TEST			BIT(2)
-+#define AT803X_SFC_POLARITY_REVERSAL		BIT(1)
-+#define AT803X_SFC_DISABLE_JABBER		BIT(0)
-+
-+#define AT803X_SPECIFIC_STATUS			0x11
-+#define AT803X_SS_SPEED_MASK			GENMASK(15, 14)
-+#define AT803X_SS_SPEED_1000			2
-+#define AT803X_SS_SPEED_100			1
-+#define AT803X_SS_SPEED_10			0
-+#define AT803X_SS_DUPLEX			BIT(13)
-+#define AT803X_SS_SPEED_DUPLEX_RESOLVED		BIT(11)
-+#define AT803X_SS_MDIX				BIT(6)
-+
-+#define QCA808X_SS_SPEED_MASK			GENMASK(9, 7)
-+#define QCA808X_SS_SPEED_2500			4
-+
-+#define AT803X_INTR_ENABLE			0x12
-+#define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
-+#define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
-+#define AT803X_INTR_ENABLE_DUPLEX_CHANGED	BIT(13)
-+#define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
-+#define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
-+#define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
-+#define AT803X_INTR_ENABLE_LINK_FAIL_BX		BIT(8)
-+#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX	BIT(7)
-+#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
-+#define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
-+#define AT803X_INTR_ENABLE_WOL			BIT(0)
-+
-+#define AT803X_INTR_STATUS			0x13
-+
-+#define AT803X_SMART_SPEED			0x14
-+#define AT803X_SMART_SPEED_ENABLE		BIT(5)
-+#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK	GENMASK(4, 2)
-+#define AT803X_SMART_SPEED_BYPASS_TIMER		BIT(1)
-+#define AT803X_CDT				0x16
-+#define AT803X_CDT_MDI_PAIR_MASK		GENMASK(9, 8)
-+#define AT803X_CDT_ENABLE_TEST			BIT(0)
-+#define AT803X_CDT_STATUS			0x1c
-+#define AT803X_CDT_STATUS_STAT_NORMAL		0
-+#define AT803X_CDT_STATUS_STAT_SHORT		1
-+#define AT803X_CDT_STATUS_STAT_OPEN		2
-+#define AT803X_CDT_STATUS_STAT_FAIL		3
-+#define AT803X_CDT_STATUS_STAT_MASK		GENMASK(9, 8)
-+#define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
-+#define AT803X_LED_CONTROL			0x18
-+
-+#define AT803X_PHY_MMD3_WOL_CTRL		0x8012
-+#define AT803X_WOL_EN				BIT(5)
-+#define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
-+#define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
-+#define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
-+#define AT803X_REG_CHIP_CONFIG			0x1f
-+#define AT803X_BT_BX_REG_SEL			0x8000
-+
-+#define AT803X_DEBUG_ADDR			0x1D
-+#define AT803X_DEBUG_DATA			0x1E
-+
-+#define AT803X_MODE_CFG_MASK			0x0F
-+#define AT803X_MODE_CFG_BASET_RGMII		0x00
-+#define AT803X_MODE_CFG_BASET_SGMII		0x01
-+#define AT803X_MODE_CFG_BX1000_RGMII_50OHM	0x02
-+#define AT803X_MODE_CFG_BX1000_RGMII_75OHM	0x03
-+#define AT803X_MODE_CFG_BX1000_CONV_50OHM	0x04
-+#define AT803X_MODE_CFG_BX1000_CONV_75OHM	0x05
-+#define AT803X_MODE_CFG_FX100_RGMII_50OHM	0x06
-+#define AT803X_MODE_CFG_FX100_CONV_50OHM	0x07
-+#define AT803X_MODE_CFG_RGMII_AUTO_MDET		0x0B
-+#define AT803X_MODE_CFG_FX100_RGMII_75OHM	0x0E
-+#define AT803X_MODE_CFG_FX100_CONV_75OHM	0x0F
-+
-+#define AT803X_PSSR				0x11	/*PHY-Specific Status Register*/
-+#define AT803X_PSSR_MR_AN_COMPLETE		0x0200
-+
-+#define AT803X_DEBUG_ANALOG_TEST_CTRL		0x00
-+#define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
-+#define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
-+#define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
-+
-+#define AT803X_DEBUG_SYSTEM_CTRL_MODE		0x05
-+#define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
-+
-+#define AT803X_DEBUG_REG_HIB_CTRL		0x0b
-+#define   AT803X_DEBUG_HIB_CTRL_SEL_RST_80U	BIT(10)
-+#define   AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE	BIT(13)
-+#define   AT803X_DEBUG_HIB_CTRL_PS_HIB_EN	BIT(15)
-+
-+#define AT803X_DEBUG_REG_3C			0x3C
-+
-+#define AT803X_DEBUG_REG_GREEN			0x3D
-+#define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
-+
-+#define AT803X_DEBUG_REG_1F			0x1F
-+#define AT803X_DEBUG_PLL_ON			BIT(2)
-+#define AT803X_DEBUG_RGMII_1V8			BIT(3)
-+
-+#define MDIO_AZ_DEBUG				0x800D
-+
-+/* AT803x supports either the XTAL input pad, an internal PLL or the
-+ * DSP as clock reference for the clock output pad. The XTAL reference
-+ * is only used for 25 MHz output, all other frequencies need the PLL.
-+ * The DSP as a clock reference is used in synchronous ethernet
-+ * applications.
-+ *
-+ * By default the PLL is only enabled if there is a link. Otherwise
-+ * the PHY will go into low power state and disabled the PLL. You can
-+ * set the PLL_ON bit (see debug register 0x1f) to keep the PLL always
-+ * enabled.
-+ */
-+#define AT803X_MMD7_CLK25M			0x8016
-+#define AT803X_CLK_OUT_MASK			GENMASK(4, 2)
-+#define AT803X_CLK_OUT_25MHZ_XTAL		0
-+#define AT803X_CLK_OUT_25MHZ_DSP		1
-+#define AT803X_CLK_OUT_50MHZ_PLL		2
-+#define AT803X_CLK_OUT_50MHZ_DSP		3
-+#define AT803X_CLK_OUT_62_5MHZ_PLL		4
-+#define AT803X_CLK_OUT_62_5MHZ_DSP		5
-+#define AT803X_CLK_OUT_125MHZ_PLL		6
-+#define AT803X_CLK_OUT_125MHZ_DSP		7
-+
-+/* The AR8035 has another mask which is compatible with the AR8031/AR8033 mask
-+ * but doesn't support choosing between XTAL/PLL and DSP.
-+ */
-+#define AT8035_CLK_OUT_MASK			GENMASK(4, 3)
-+
-+#define AT803X_CLK_OUT_STRENGTH_MASK		GENMASK(8, 7)
-+#define AT803X_CLK_OUT_STRENGTH_FULL		0
-+#define AT803X_CLK_OUT_STRENGTH_HALF		1
-+#define AT803X_CLK_OUT_STRENGTH_QUARTER		2
-+
-+#define AT803X_DEFAULT_DOWNSHIFT		5
-+#define AT803X_MIN_DOWNSHIFT			2
-+#define AT803X_MAX_DOWNSHIFT			9
-+
-+#define AT803X_MMD3_SMARTEEE_CTL1		0x805b
-+#define AT803X_MMD3_SMARTEEE_CTL2		0x805c
-+#define AT803X_MMD3_SMARTEEE_CTL3		0x805d
-+#define AT803X_MMD3_SMARTEEE_CTL3_LPI_EN	BIT(8)
-+
-+#define ATH9331_PHY_ID				0x004dd041
-+#define ATH8030_PHY_ID				0x004dd076
-+#define ATH8031_PHY_ID				0x004dd074
-+#define ATH8032_PHY_ID				0x004dd023
-+#define ATH8035_PHY_ID				0x004dd072
-+#define AT8030_PHY_ID_MASK			0xffffffef
-+
-+#define QCA8081_PHY_ID				0x004dd101
-+
-+#define QCA8327_A_PHY_ID			0x004dd033
-+#define QCA8327_B_PHY_ID			0x004dd034
-+#define QCA8337_PHY_ID				0x004dd036
-+#define QCA9561_PHY_ID				0x004dd042
-+#define QCA8K_PHY_ID_MASK			0xffffffff
-+
-+#define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
-+
-+#define AT803X_PAGE_FIBER			0
-+#define AT803X_PAGE_COPPER			1
-+
-+/* don't turn off internal PLL */
-+#define AT803X_KEEP_PLL_ENABLED			BIT(0)
-+#define AT803X_DISABLE_SMARTEEE			BIT(1)
-+
-+/* disable hibernation mode */
-+#define AT803X_DISABLE_HIBERNATION_MODE		BIT(2)
-+
-+/* ADC threshold */
-+#define QCA808X_PHY_DEBUG_ADC_THRESHOLD		0x2c80
-+#define QCA808X_ADC_THRESHOLD_MASK		GENMASK(7, 0)
-+#define QCA808X_ADC_THRESHOLD_80MV		0
-+#define QCA808X_ADC_THRESHOLD_100MV		0xf0
-+#define QCA808X_ADC_THRESHOLD_200MV		0x0f
-+#define QCA808X_ADC_THRESHOLD_300MV		0xff
-+
-+/* CLD control */
-+#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7		0x8007
-+#define QCA808X_8023AZ_AFE_CTRL_MASK		GENMASK(8, 4)
-+#define QCA808X_8023AZ_AFE_EN			0x90
-+
-+/* AZ control */
-+#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL	0x8008
-+#define QCA808X_MMD3_AZ_TRAINING_VAL		0x1c32
-+
-+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB	0x8014
-+#define QCA808X_MSE_THRESHOLD_20DB_VALUE	0x529
-+
-+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB	0x800E
-+#define QCA808X_MSE_THRESHOLD_17DB_VALUE	0x341
-+
-+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB	0x801E
-+#define QCA808X_MSE_THRESHOLD_27DB_VALUE	0x419
-+
-+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB	0x8020
-+#define QCA808X_MSE_THRESHOLD_28DB_VALUE	0x341
-+
-+#define QCA808X_PHY_MMD7_TOP_OPTION1		0x901c
-+#define QCA808X_TOP_OPTION1_DATA		0x0
-+
-+#define QCA808X_PHY_MMD3_DEBUG_1		0xa100
-+#define QCA808X_MMD3_DEBUG_1_VALUE		0x9203
-+#define QCA808X_PHY_MMD3_DEBUG_2		0xa101
-+#define QCA808X_MMD3_DEBUG_2_VALUE		0x48ad
-+#define QCA808X_PHY_MMD3_DEBUG_3		0xa103
-+#define QCA808X_MMD3_DEBUG_3_VALUE		0x1698
-+#define QCA808X_PHY_MMD3_DEBUG_4		0xa105
-+#define QCA808X_MMD3_DEBUG_4_VALUE		0x8001
-+#define QCA808X_PHY_MMD3_DEBUG_5		0xa106
-+#define QCA808X_MMD3_DEBUG_5_VALUE		0x1111
-+#define QCA808X_PHY_MMD3_DEBUG_6		0xa011
-+#define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
-+
-+/* master/slave seed config */
-+#define QCA808X_PHY_DEBUG_LOCAL_SEED		9
-+#define QCA808X_MASTER_SLAVE_SEED_ENABLE	BIT(1)
-+#define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
-+#define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
-+
-+/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
-+ * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
-+ */
-+#define QCA808X_DBG_AN_TEST			0xb
-+#define QCA808X_HIBERNATION_EN			BIT(15)
-+
-+#define QCA808X_CDT_ENABLE_TEST			BIT(15)
-+#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
-+#define QCA808X_CDT_STATUS			BIT(11)
-+#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
-+
-+#define QCA808X_MMD3_CDT_STATUS			0x8064
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
-+#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
-+#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
-+
-+#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
-+#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
-+#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
-+#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
-+
-+#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
-+#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
-+#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
-+#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
-+#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
-+
-+#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
-+#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
-+#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
-+#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
-+
-+/* NORMAL are MDI with type set to 0 */
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI1)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI1)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI2)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI2)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI3)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI3)
-+
-+/* Added for reference of existence but should be handled by wait_for_completion already */
-+#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
-+
-+#define QCA808X_MMD7_LED_GLOBAL			0x8073
-+#define QCA808X_LED_BLINK_1			GENMASK(11, 6)
-+#define QCA808X_LED_BLINK_2			GENMASK(5, 0)
-+/* Values are the same for both BLINK_1 and BLINK_2 */
-+#define QCA808X_LED_BLINK_FREQ_MASK		GENMASK(5, 3)
-+#define QCA808X_LED_BLINK_FREQ_2HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
-+#define QCA808X_LED_BLINK_FREQ_4HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
-+#define QCA808X_LED_BLINK_FREQ_8HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
-+#define QCA808X_LED_BLINK_FREQ_16HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
-+#define QCA808X_LED_BLINK_FREQ_32HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
-+#define QCA808X_LED_BLINK_FREQ_64HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
-+#define QCA808X_LED_BLINK_FREQ_128HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
-+#define QCA808X_LED_BLINK_FREQ_256HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
-+#define QCA808X_LED_BLINK_DUTY_MASK		GENMASK(2, 0)
-+#define QCA808X_LED_BLINK_DUTY_50_50		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
-+#define QCA808X_LED_BLINK_DUTY_75_25		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
-+#define QCA808X_LED_BLINK_DUTY_25_75		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
-+#define QCA808X_LED_BLINK_DUTY_33_67		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
-+#define QCA808X_LED_BLINK_DUTY_67_33		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
-+#define QCA808X_LED_BLINK_DUTY_17_83		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
-+#define QCA808X_LED_BLINK_DUTY_83_17		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
-+#define QCA808X_LED_BLINK_DUTY_8_92		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
-+
-+#define QCA808X_MMD7_LED2_CTRL			0x8074
-+#define QCA808X_MMD7_LED2_FORCE_CTRL		0x8075
-+#define QCA808X_MMD7_LED1_CTRL			0x8076
-+#define QCA808X_MMD7_LED1_FORCE_CTRL		0x8077
-+#define QCA808X_MMD7_LED0_CTRL			0x8078
-+#define QCA808X_MMD7_LED_CTRL(x)		(0x8078 - ((x) * 2))
-+
-+/* LED hw control pattern is the same for every LED */
-+#define QCA808X_LED_PATTERN_MASK		GENMASK(15, 0)
-+#define QCA808X_LED_SPEED2500_ON		BIT(15)
-+#define QCA808X_LED_SPEED2500_BLINK		BIT(14)
-+/* Follow blink trigger even if duplex or speed condition doesn't match */
-+#define QCA808X_LED_BLINK_CHECK_BYPASS		BIT(13)
-+#define QCA808X_LED_FULL_DUPLEX_ON		BIT(12)
-+#define QCA808X_LED_HALF_DUPLEX_ON		BIT(11)
-+#define QCA808X_LED_TX_BLINK			BIT(10)
-+#define QCA808X_LED_RX_BLINK			BIT(9)
-+#define QCA808X_LED_TX_ON_10MS			BIT(8)
-+#define QCA808X_LED_RX_ON_10MS			BIT(7)
-+#define QCA808X_LED_SPEED1000_ON		BIT(6)
-+#define QCA808X_LED_SPEED100_ON			BIT(5)
-+#define QCA808X_LED_SPEED10_ON			BIT(4)
-+#define QCA808X_LED_COLLISION_BLINK		BIT(3)
-+#define QCA808X_LED_SPEED1000_BLINK		BIT(2)
-+#define QCA808X_LED_SPEED100_BLINK		BIT(1)
-+#define QCA808X_LED_SPEED10_BLINK		BIT(0)
-+
-+#define QCA808X_MMD7_LED0_FORCE_CTRL		0x8079
-+#define QCA808X_MMD7_LED_FORCE_CTRL(x)		(0x8079 - ((x) * 2))
-+
-+/* LED force ctrl is the same for every LED
-+ * No documentation exist for this, not even internal one
-+ * with NDA as QCOM gives only info about configuring
-+ * hw control pattern rules and doesn't indicate any way
-+ * to force the LED to specific mode.
-+ * These define comes from reverse and testing and maybe
-+ * lack of some info or some info are not entirely correct.
-+ * For the basic LED control and hw control these finding
-+ * are enough to support LED control in all the required APIs.
-+ *
-+ * On doing some comparison with implementation with qca807x,
-+ * it was found that it's 1:1 equal to it and confirms all the
-+ * reverse done. It was also found further specification with the
-+ * force mode and the blink modes.
-+ */
-+#define QCA808X_LED_FORCE_EN			BIT(15)
-+#define QCA808X_LED_FORCE_MODE_MASK		GENMASK(14, 13)
-+#define QCA808X_LED_FORCE_BLINK_1		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
-+#define QCA808X_LED_FORCE_BLINK_2		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
-+#define QCA808X_LED_FORCE_ON			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
-+#define QCA808X_LED_FORCE_OFF			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
-+
-+#define QCA808X_MMD7_LED_POLARITY_CTRL		0x901a
-+/* QSDK sets by default 0x46 to this reg that sets BIT 6 for
-+ * LED to active high. It's not clear what BIT 3 and BIT 4 does.
-+ */
-+#define QCA808X_LED_ACTIVE_HIGH			BIT(6)
-+
-+/* QCA808X 1G chip type */
-+#define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
-+#define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
-+
-+#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL	0x9072
-+#define QCA8081_PHY_FIFO_RSTN			BIT(11)
-+
-+MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
-+MODULE_AUTHOR("Matus Ujhelyi");
-+MODULE_LICENSE("GPL");
-+
-+enum stat_access_type {
-+	PHY,
-+	MMD
-+};
-+
-+struct at803x_hw_stat {
-+	const char *string;
-+	u8 reg;
-+	u32 mask;
-+	enum stat_access_type access_type;
-+};
-+
-+static struct at803x_hw_stat qca83xx_hw_stats[] = {
-+	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
-+	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
-+	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
-+};
-+
-+struct at803x_ss_mask {
-+	u16 speed_mask;
-+	u8 speed_shift;
-+};
-+
-+struct at803x_priv {
-+	int flags;
-+	u16 clk_25m_reg;
-+	u16 clk_25m_mask;
-+	u8 smarteee_lpi_tw_1g;
-+	u8 smarteee_lpi_tw_100m;
-+	bool is_fiber;
-+	bool is_1000basex;
-+	struct regulator_dev *vddio_rdev;
-+	struct regulator_dev *vddh_rdev;
-+	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
-+	int led_polarity_mode;
-+};
-+
-+struct at803x_context {
-+	u16 bmcr;
-+	u16 advertise;
-+	u16 control1000;
-+	u16 int_enable;
-+	u16 smart_speed;
-+	u16 led_control;
-+};
-+
-+static int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data)
-+{
-+	int ret;
-+
-+	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
-+	if (ret < 0)
-+		return ret;
-+
-+	return phy_write(phydev, AT803X_DEBUG_DATA, data);
-+}
-+
-+static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
-+{
-+	int ret;
-+
-+	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
-+	if (ret < 0)
-+		return ret;
-+
-+	return phy_read(phydev, AT803X_DEBUG_DATA);
-+}
-+
-+static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
-+				 u16 clear, u16 set)
-+{
-+	u16 val;
-+	int ret;
-+
-+	ret = at803x_debug_reg_read(phydev, reg);
-+	if (ret < 0)
-+		return ret;
-+
-+	val = ret & 0xffff;
-+	val &= ~clear;
-+	val |= set;
-+
-+	return phy_write(phydev, AT803X_DEBUG_DATA, val);
-+}
-+
-+static int at803x_write_page(struct phy_device *phydev, int page)
-+{
-+	int mask;
-+	int set;
-+
-+	if (page == AT803X_PAGE_COPPER) {
-+		set = AT803X_BT_BX_REG_SEL;
-+		mask = 0;
-+	} else {
-+		set = 0;
-+		mask = AT803X_BT_BX_REG_SEL;
-+	}
-+
-+	return __phy_modify(phydev, AT803X_REG_CHIP_CONFIG, mask, set);
-+}
-+
-+static int at803x_read_page(struct phy_device *phydev)
-+{
-+	int ccr = __phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+
-+	if (ccr < 0)
-+		return ccr;
-+
-+	if (ccr & AT803X_BT_BX_REG_SEL)
-+		return AT803X_PAGE_COPPER;
-+
-+	return AT803X_PAGE_FIBER;
-+}
-+
-+static int at803x_enable_rx_delay(struct phy_device *phydev)
-+{
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0,
-+				     AT803X_DEBUG_RX_CLK_DLY_EN);
-+}
-+
-+static int at803x_enable_tx_delay(struct phy_device *phydev)
-+{
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0,
-+				     AT803X_DEBUG_TX_CLK_DLY_EN);
-+}
-+
-+static int at803x_disable_rx_delay(struct phy_device *phydev)
-+{
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-+				     AT803X_DEBUG_RX_CLK_DLY_EN, 0);
-+}
-+
-+static int at803x_disable_tx_delay(struct phy_device *phydev)
-+{
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE,
-+				     AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+}
-+
-+/* save relevant PHY registers to private copy */
-+static void at803x_context_save(struct phy_device *phydev,
-+				struct at803x_context *context)
-+{
-+	context->bmcr = phy_read(phydev, MII_BMCR);
-+	context->advertise = phy_read(phydev, MII_ADVERTISE);
-+	context->control1000 = phy_read(phydev, MII_CTRL1000);
-+	context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
-+	context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
-+	context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
-+}
-+
-+/* restore relevant PHY registers from private copy */
-+static void at803x_context_restore(struct phy_device *phydev,
-+				   const struct at803x_context *context)
-+{
-+	phy_write(phydev, MII_BMCR, context->bmcr);
-+	phy_write(phydev, MII_ADVERTISE, context->advertise);
-+	phy_write(phydev, MII_CTRL1000, context->control1000);
-+	phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
-+	phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
-+	phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
-+}
-+
-+static int at803x_set_wol(struct phy_device *phydev,
-+			  struct ethtool_wolinfo *wol)
-+{
-+	int ret, irq_enabled;
-+
-+	if (wol->wolopts & WAKE_MAGIC) {
-+		struct net_device *ndev = phydev->attached_dev;
-+		const u8 *mac;
-+		unsigned int i;
-+		static const unsigned int offsets[] = {
-+			AT803X_LOC_MAC_ADDR_32_47_OFFSET,
-+			AT803X_LOC_MAC_ADDR_16_31_OFFSET,
-+			AT803X_LOC_MAC_ADDR_0_15_OFFSET,
-+		};
-+
-+		if (!ndev)
-+			return -ENODEV;
-+
-+		mac = (const u8 *)ndev->dev_addr;
-+
-+		if (!is_valid_ether_addr(mac))
-+			return -EINVAL;
-+
-+		for (i = 0; i < 3; i++)
-+			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
-+				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
-+
-+		/* Enable WOL interrupt */
-+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
-+		if (ret)
-+			return ret;
-+	} else {
-+		/* Disable WOL interrupt */
-+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	/* Clear WOL status */
-+	ret = phy_read(phydev, AT803X_INTR_STATUS);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Check if there are other interrupts except for WOL triggered when PHY is
-+	 * in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can
-+	 * be passed up to the interrupt PIN.
-+	 */
-+	irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
-+	if (irq_enabled < 0)
-+		return irq_enabled;
-+
-+	irq_enabled &= ~AT803X_INTR_ENABLE_WOL;
-+	if (ret & irq_enabled && !phy_polling_mode(phydev))
-+		phy_trigger_machine(phydev);
-+
-+	return 0;
-+}
-+
-+static void at803x_get_wol(struct phy_device *phydev,
-+			   struct ethtool_wolinfo *wol)
-+{
-+	int value;
-+
-+	wol->supported = WAKE_MAGIC;
-+	wol->wolopts = 0;
-+
-+	value = phy_read(phydev, AT803X_INTR_ENABLE);
-+	if (value < 0)
-+		return;
-+
-+	if (value & AT803X_INTR_ENABLE_WOL)
-+		wol->wolopts |= WAKE_MAGIC;
-+}
-+
-+static int qca83xx_get_sset_count(struct phy_device *phydev)
-+{
-+	return ARRAY_SIZE(qca83xx_hw_stats);
-+}
-+
-+static void qca83xx_get_strings(struct phy_device *phydev, u8 *data)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) {
-+		strscpy(data + i * ETH_GSTRING_LEN,
-+			qca83xx_hw_stats[i].string, ETH_GSTRING_LEN);
-+	}
-+}
-+
-+static u64 qca83xx_get_stat(struct phy_device *phydev, int i)
-+{
-+	struct at803x_hw_stat stat = qca83xx_hw_stats[i];
-+	struct at803x_priv *priv = phydev->priv;
-+	int val;
-+	u64 ret;
-+
-+	if (stat.access_type == MMD)
-+		val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
-+	else
-+		val = phy_read(phydev, stat.reg);
-+
-+	if (val < 0) {
-+		ret = U64_MAX;
-+	} else {
-+		val = val & stat.mask;
-+		priv->stats[i] += val;
-+		ret = priv->stats[i];
-+	}
-+
-+	return ret;
-+}
-+
-+static void qca83xx_get_stats(struct phy_device *phydev,
-+			      struct ethtool_stats *stats, u64 *data)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++)
-+		data[i] = qca83xx_get_stat(phydev, i);
-+}
-+
-+static int at803x_suspend(struct phy_device *phydev)
-+{
-+	int value;
-+	int wol_enabled;
-+
-+	value = phy_read(phydev, AT803X_INTR_ENABLE);
-+	wol_enabled = value & AT803X_INTR_ENABLE_WOL;
-+
-+	if (wol_enabled)
-+		value = BMCR_ISOLATE;
-+	else
-+		value = BMCR_PDOWN;
-+
-+	phy_modify(phydev, MII_BMCR, 0, value);
-+
-+	return 0;
-+}
-+
-+static int at803x_resume(struct phy_device *phydev)
-+{
-+	return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0);
-+}
-+
-+static int at803x_parse_dt(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	struct at803x_priv *priv = phydev->priv;
-+	u32 freq, strength, tw;
-+	unsigned int sel;
-+	int ret;
-+
-+	if (!IS_ENABLED(CONFIG_OF_MDIO))
-+		return 0;
-+
-+	if (of_property_read_bool(node, "qca,disable-smarteee"))
-+		priv->flags |= AT803X_DISABLE_SMARTEEE;
-+
-+	if (of_property_read_bool(node, "qca,disable-hibernation-mode"))
-+		priv->flags |= AT803X_DISABLE_HIBERNATION_MODE;
-+
-+	if (!of_property_read_u32(node, "qca,smarteee-tw-us-1g", &tw)) {
-+		if (!tw || tw > 255) {
-+			phydev_err(phydev, "invalid qca,smarteee-tw-us-1g\n");
-+			return -EINVAL;
-+		}
-+		priv->smarteee_lpi_tw_1g = tw;
-+	}
-+
-+	if (!of_property_read_u32(node, "qca,smarteee-tw-us-100m", &tw)) {
-+		if (!tw || tw > 255) {
-+			phydev_err(phydev, "invalid qca,smarteee-tw-us-100m\n");
-+			return -EINVAL;
-+		}
-+		priv->smarteee_lpi_tw_100m = tw;
-+	}
-+
-+	ret = of_property_read_u32(node, "qca,clk-out-frequency", &freq);
-+	if (!ret) {
-+		switch (freq) {
-+		case 25000000:
-+			sel = AT803X_CLK_OUT_25MHZ_XTAL;
-+			break;
-+		case 50000000:
-+			sel = AT803X_CLK_OUT_50MHZ_PLL;
-+			break;
-+		case 62500000:
-+			sel = AT803X_CLK_OUT_62_5MHZ_PLL;
-+			break;
-+		case 125000000:
-+			sel = AT803X_CLK_OUT_125MHZ_PLL;
-+			break;
-+		default:
-+			phydev_err(phydev, "invalid qca,clk-out-frequency\n");
-+			return -EINVAL;
-+		}
-+
-+		priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel);
-+		priv->clk_25m_mask |= AT803X_CLK_OUT_MASK;
-+	}
-+
-+	ret = of_property_read_u32(node, "qca,clk-out-strength", &strength);
-+	if (!ret) {
-+		priv->clk_25m_mask |= AT803X_CLK_OUT_STRENGTH_MASK;
-+		switch (strength) {
-+		case AR803X_STRENGTH_FULL:
-+			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_FULL;
-+			break;
-+		case AR803X_STRENGTH_HALF:
-+			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_HALF;
-+			break;
-+		case AR803X_STRENGTH_QUARTER:
-+			priv->clk_25m_reg |= AT803X_CLK_OUT_STRENGTH_QUARTER;
-+			break;
-+		default:
-+			phydev_err(phydev, "invalid qca,clk-out-strength\n");
-+			return -EINVAL;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int at803x_probe(struct phy_device *phydev)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	struct at803x_priv *priv;
-+	int ret;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	/* Init LED polarity mode to -1 */
-+	priv->led_polarity_mode = -1;
-+
-+	phydev->priv = priv;
-+
-+	ret = at803x_parse_dt(phydev);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+static int at803x_get_features(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	int err;
-+
-+	err = genphy_read_abilities(phydev);
-+	if (err)
-+		return err;
-+
-+	if (phydev->drv->phy_id != ATH8031_PHY_ID)
-+		return 0;
-+
-+	/* AR8031/AR8033 have different status registers
-+	 * for copper and fiber operation. However, the
-+	 * extended status register is the same for both
-+	 * operation modes.
-+	 *
-+	 * As a result of that, ESTATUS_1000_XFULL is set
-+	 * to 1 even when operating in copper TP mode.
-+	 *
-+	 * Remove this mode from the supported link modes
-+	 * when not operating in 1000BaseX mode.
-+	 */
-+	if (!priv->is_1000basex)
-+		linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-+				   phydev->supported);
-+
-+	return 0;
-+}
-+
-+static int at803x_smarteee_config(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	u16 mask = 0, val = 0;
-+	int ret;
-+
-+	if (priv->flags & AT803X_DISABLE_SMARTEEE)
-+		return phy_modify_mmd(phydev, MDIO_MMD_PCS,
-+				      AT803X_MMD3_SMARTEEE_CTL3,
-+				      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN, 0);
-+
-+	if (priv->smarteee_lpi_tw_1g) {
-+		mask |= 0xff00;
-+		val |= priv->smarteee_lpi_tw_1g << 8;
-+	}
-+	if (priv->smarteee_lpi_tw_100m) {
-+		mask |= 0x00ff;
-+		val |= priv->smarteee_lpi_tw_100m;
-+	}
-+	if (!mask)
-+		return 0;
-+
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL1,
-+			     mask, val);
-+	if (ret)
-+		return ret;
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_MMD3_SMARTEEE_CTL3,
-+			      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN,
-+			      AT803X_MMD3_SMARTEEE_CTL3_LPI_EN);
-+}
-+
-+static int at803x_clk_out_config(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+
-+	if (!priv->clk_25m_mask)
-+		return 0;
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M,
-+			      priv->clk_25m_mask, priv->clk_25m_reg);
-+}
-+
-+static int at8031_pll_config(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+
-+	/* The default after hardware reset is PLL OFF. After a soft reset, the
-+	 * values are retained.
-+	 */
-+	if (priv->flags & AT803X_KEEP_PLL_ENABLED)
-+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-+					     0, AT803X_DEBUG_PLL_ON);
-+	else
-+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-+					     AT803X_DEBUG_PLL_ON, 0);
-+}
-+
-+static int at803x_hibernation_mode_config(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+
-+	/* The default after hardware reset is hibernation mode enabled. After
-+	 * software reset, the value is retained.
-+	 */
-+	if (!(priv->flags & AT803X_DISABLE_HIBERNATION_MODE))
-+		return 0;
-+
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
-+					 AT803X_DEBUG_HIB_CTRL_PS_HIB_EN, 0);
-+}
-+
-+static int at803x_config_init(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* The RX and TX delay default is:
-+	 *   after HW reset: RX delay enabled and TX delay disabled
-+	 *   after SW reset: RX delay enabled, while TX delay retains the
-+	 *   value before reset.
-+	 */
-+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
-+		ret = at803x_enable_rx_delay(phydev);
-+	else
-+		ret = at803x_disable_rx_delay(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
-+		ret = at803x_enable_tx_delay(phydev);
-+	else
-+		ret = at803x_disable_tx_delay(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = at803x_smarteee_config(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = at803x_clk_out_config(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = at803x_hibernation_mode_config(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Ar803x extended next page bit is enabled by default. Cisco
-+	 * multigig switches read this bit and attempt to negotiate 10Gbps
-+	 * rates even if the next page bit is disabled. This is incorrect
-+	 * behaviour but we still need to accommodate it. XNP is only needed
-+	 * for 10Gbps support, so disable XNP.
-+	 */
-+	return phy_modify(phydev, MII_ADVERTISE, MDIO_AN_CTRL1_XNP, 0);
-+}
-+
-+static int at803x_ack_interrupt(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	err = phy_read(phydev, AT803X_INTR_STATUS);
-+
-+	return (err < 0) ? err : 0;
-+}
-+
-+static int at803x_config_intr(struct phy_device *phydev)
-+{
-+	int err;
-+	int value;
-+
-+	value = phy_read(phydev, AT803X_INTR_ENABLE);
-+
-+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
-+		/* Clear any pending interrupts */
-+		err = at803x_ack_interrupt(phydev);
-+		if (err)
-+			return err;
-+
-+		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
-+		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
-+		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
-+		value |= AT803X_INTR_ENABLE_LINK_FAIL;
-+		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
-+
-+		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
-+	} else {
-+		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
-+		if (err)
-+			return err;
-+
-+		/* Clear any pending interrupts */
-+		err = at803x_ack_interrupt(phydev);
-+	}
-+
-+	return err;
-+}
-+
-+static irqreturn_t at803x_handle_interrupt(struct phy_device *phydev)
-+{
-+	int irq_status, int_enabled;
-+
-+	irq_status = phy_read(phydev, AT803X_INTR_STATUS);
-+	if (irq_status < 0) {
-+		phy_error(phydev);
-+		return IRQ_NONE;
-+	}
-+
-+	/* Read the current enabled interrupts */
-+	int_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
-+	if (int_enabled < 0) {
-+		phy_error(phydev);
-+		return IRQ_NONE;
-+	}
-+
-+	/* See if this was one of our enabled interrupts */
-+	if (!(irq_status & int_enabled))
-+		return IRQ_NONE;
-+
-+	phy_trigger_machine(phydev);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void at803x_link_change_notify(struct phy_device *phydev)
-+{
-+	/*
-+	 * Conduct a hardware reset for AT8030 every time a link loss is
-+	 * signalled. This is necessary to circumvent a hardware bug that
-+	 * occurs when the cable is unplugged while TX packets are pending
-+	 * in the FIFO. In such cases, the FIFO enters an error mode it
-+	 * cannot recover from by software.
-+	 */
-+	if (phydev->state == PHY_NOLINK && phydev->mdio.reset_gpio) {
-+		struct at803x_context context;
-+
-+		at803x_context_save(phydev, &context);
-+
-+		phy_device_reset(phydev, 1);
-+		usleep_range(1000, 2000);
-+		phy_device_reset(phydev, 0);
-+		usleep_range(1000, 2000);
-+
-+		at803x_context_restore(phydev, &context);
-+
-+		phydev_dbg(phydev, "%s(): phy was reset\n", __func__);
-+	}
-+}
-+
-+static int at803x_read_specific_status(struct phy_device *phydev,
-+				       struct at803x_ss_mask ss_mask)
-+{
-+	int ss;
-+
-+	/* Read the AT8035 PHY-Specific Status register, which indicates the
-+	 * speed and duplex that the PHY is actually using, irrespective of
-+	 * whether we are in autoneg mode or not.
-+	 */
-+	ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
-+	if (ss < 0)
-+		return ss;
-+
-+	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
-+		int sfc, speed;
-+
-+		sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL);
-+		if (sfc < 0)
-+			return sfc;
-+
-+		speed = ss & ss_mask.speed_mask;
-+		speed >>= ss_mask.speed_shift;
-+
-+		switch (speed) {
-+		case AT803X_SS_SPEED_10:
-+			phydev->speed = SPEED_10;
-+			break;
-+		case AT803X_SS_SPEED_100:
-+			phydev->speed = SPEED_100;
-+			break;
-+		case AT803X_SS_SPEED_1000:
-+			phydev->speed = SPEED_1000;
-+			break;
-+		case QCA808X_SS_SPEED_2500:
-+			phydev->speed = SPEED_2500;
-+			break;
-+		}
-+		if (ss & AT803X_SS_DUPLEX)
-+			phydev->duplex = DUPLEX_FULL;
-+		else
-+			phydev->duplex = DUPLEX_HALF;
-+
-+		if (ss & AT803X_SS_MDIX)
-+			phydev->mdix = ETH_TP_MDI_X;
-+		else
-+			phydev->mdix = ETH_TP_MDI;
-+
-+		switch (FIELD_GET(AT803X_SFC_MDI_CROSSOVER_MODE_M, sfc)) {
-+		case AT803X_SFC_MANUAL_MDI:
-+			phydev->mdix_ctrl = ETH_TP_MDI;
-+			break;
-+		case AT803X_SFC_MANUAL_MDIX:
-+			phydev->mdix_ctrl = ETH_TP_MDI_X;
-+			break;
-+		case AT803X_SFC_AUTOMATIC_CROSSOVER:
-+			phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
-+			break;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int at803x_read_status(struct phy_device *phydev)
-+{
-+	struct at803x_ss_mask ss_mask = { 0 };
-+	int err, old_link = phydev->link;
-+
-+	/* Update the link, but return if there was an error */
-+	err = genphy_update_link(phydev);
-+	if (err)
-+		return err;
-+
-+	/* why bother the PHY if nothing can have changed */
-+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
-+		return 0;
-+
-+	phydev->speed = SPEED_UNKNOWN;
-+	phydev->duplex = DUPLEX_UNKNOWN;
-+	phydev->pause = 0;
-+	phydev->asym_pause = 0;
-+
-+	err = genphy_read_lpa(phydev);
-+	if (err < 0)
-+		return err;
-+
-+	ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
-+	ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
-+	err = at803x_read_specific_status(phydev, ss_mask);
-+	if (err < 0)
-+		return err;
-+
-+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
-+		phy_resolve_aneg_pause(phydev);
-+
-+	return 0;
-+}
-+
-+static int at803x_config_mdix(struct phy_device *phydev, u8 ctrl)
-+{
-+	u16 val;
-+
-+	switch (ctrl) {
-+	case ETH_TP_MDI:
-+		val = AT803X_SFC_MANUAL_MDI;
-+		break;
-+	case ETH_TP_MDI_X:
-+		val = AT803X_SFC_MANUAL_MDIX;
-+		break;
-+	case ETH_TP_MDI_AUTO:
-+		val = AT803X_SFC_AUTOMATIC_CROSSOVER;
-+		break;
-+	default:
-+		return 0;
-+	}
-+
-+	return phy_modify_changed(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL,
-+			  AT803X_SFC_MDI_CROSSOVER_MODE_M,
-+			  FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val));
-+}
-+
-+static int at803x_prepare_config_aneg(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Changes of the midx bits are disruptive to the normal operation;
-+	 * therefore any changes to these registers must be followed by a
-+	 * software reset to take effect.
-+	 */
-+	if (ret == 1) {
-+		ret = genphy_soft_reset(phydev);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int at803x_config_aneg(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	int ret;
-+
-+	ret = at803x_prepare_config_aneg(phydev);
-+	if (ret)
-+		return ret;
-+
-+	if (priv->is_1000basex)
-+		return genphy_c37_config_aneg(phydev);
-+
-+	return genphy_config_aneg(phydev);
-+}
-+
-+static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
-+{
-+	int val;
-+
-+	val = phy_read(phydev, AT803X_SMART_SPEED);
-+	if (val < 0)
-+		return val;
-+
-+	if (val & AT803X_SMART_SPEED_ENABLE)
-+		*d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2;
-+	else
-+		*d = DOWNSHIFT_DEV_DISABLE;
-+
-+	return 0;
-+}
-+
-+static int at803x_set_downshift(struct phy_device *phydev, u8 cnt)
-+{
-+	u16 mask, set;
-+	int ret;
-+
-+	switch (cnt) {
-+	case DOWNSHIFT_DEV_DEFAULT_COUNT:
-+		cnt = AT803X_DEFAULT_DOWNSHIFT;
-+		fallthrough;
-+	case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT:
-+		set = AT803X_SMART_SPEED_ENABLE |
-+		      AT803X_SMART_SPEED_BYPASS_TIMER |
-+		      FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2);
-+		mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK;
-+		break;
-+	case DOWNSHIFT_DEV_DISABLE:
-+		set = 0;
-+		mask = AT803X_SMART_SPEED_ENABLE |
-+		       AT803X_SMART_SPEED_BYPASS_TIMER;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set);
-+
-+	/* After changing the smart speed settings, we need to perform a
-+	 * software reset, use phy_init_hw() to make sure we set the
-+	 * reapply any values which might got lost during software reset.
-+	 */
-+	if (ret == 1)
-+		ret = phy_init_hw(phydev);
-+
-+	return ret;
-+}
-+
-+static int at803x_get_tunable(struct phy_device *phydev,
-+			      struct ethtool_tunable *tuna, void *data)
-+{
-+	switch (tuna->id) {
-+	case ETHTOOL_PHY_DOWNSHIFT:
-+		return at803x_get_downshift(phydev, data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+static int at803x_set_tunable(struct phy_device *phydev,
-+			      struct ethtool_tunable *tuna, const void *data)
-+{
-+	switch (tuna->id) {
-+	case ETHTOOL_PHY_DOWNSHIFT:
-+		return at803x_set_downshift(phydev, *(const u8 *)data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+static int at803x_cable_test_result_trans(u16 status)
-+{
-+	switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
-+	case AT803X_CDT_STATUS_STAT_NORMAL:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
-+	case AT803X_CDT_STATUS_STAT_SHORT:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
-+	case AT803X_CDT_STATUS_STAT_OPEN:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
-+	case AT803X_CDT_STATUS_STAT_FAIL:
-+	default:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
-+	}
-+}
-+
-+static bool at803x_cdt_test_failed(u16 status)
-+{
-+	return FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status) ==
-+		AT803X_CDT_STATUS_STAT_FAIL;
-+}
-+
-+static bool at803x_cdt_fault_length_valid(u16 status)
-+{
-+	switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
-+	case AT803X_CDT_STATUS_STAT_OPEN:
-+	case AT803X_CDT_STATUS_STAT_SHORT:
-+		return true;
-+	}
-+	return false;
-+}
-+
-+static int at803x_cdt_fault_length(int dt)
-+{
-+	/* According to the datasheet the distance to the fault is
-+	 * DELTA_TIME * 0.824 meters.
-+	 *
-+	 * The author suspect the correct formula is:
-+	 *
-+	 *   fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2
-+	 *
-+	 * where c is the speed of light, VF is the velocity factor of
-+	 * the twisted pair cable, 125MHz the counter frequency and
-+	 * we need to divide by 2 because the hardware will measure the
-+	 * round trip time to the fault and back to the PHY.
-+	 *
-+	 * With a VF of 0.69 we get the factor 0.824 mentioned in the
-+	 * datasheet.
-+	 */
-+	return (dt * 824) / 10;
-+}
-+
-+static int at803x_cdt_start(struct phy_device *phydev,
-+			    u32 cdt_start)
-+{
-+	return phy_write(phydev, AT803X_CDT, cdt_start);
-+}
-+
-+static int at803x_cdt_wait_for_completion(struct phy_device *phydev,
-+					  u32 cdt_en)
-+{
-+	int val, ret;
-+
-+	/* One test run takes about 25ms */
-+	ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
-+				    !(val & cdt_en),
-+				    30000, 100000, true);
-+
-+	return ret < 0 ? ret : 0;
-+}
-+
-+static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair)
-+{
-+	static const int ethtool_pair[] = {
-+		ETHTOOL_A_CABLE_PAIR_A,
-+		ETHTOOL_A_CABLE_PAIR_B,
-+		ETHTOOL_A_CABLE_PAIR_C,
-+		ETHTOOL_A_CABLE_PAIR_D,
-+	};
-+	int ret, val;
-+
-+	val = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) |
-+	      AT803X_CDT_ENABLE_TEST;
-+	ret = at803x_cdt_start(phydev, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = at803x_cdt_wait_for_completion(phydev, AT803X_CDT_ENABLE_TEST);
-+	if (ret)
-+		return ret;
-+
-+	val = phy_read(phydev, AT803X_CDT_STATUS);
-+	if (val < 0)
-+		return val;
-+
-+	if (at803x_cdt_test_failed(val))
-+		return 0;
-+
-+	ethnl_cable_test_result(phydev, ethtool_pair[pair],
-+				at803x_cable_test_result_trans(val));
-+
-+	if (at803x_cdt_fault_length_valid(val)) {
-+		val = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, val);
-+		ethnl_cable_test_fault_length(phydev, ethtool_pair[pair],
-+					      at803x_cdt_fault_length(val));
-+	}
-+
-+	return 1;
-+}
-+
-+static int at803x_cable_test_get_status(struct phy_device *phydev,
-+					bool *finished, unsigned long pair_mask)
-+{
-+	int retries = 20;
-+	int pair, ret;
-+
-+	*finished = false;
-+
-+	/* According to the datasheet the CDT can be performed when
-+	 * there is no link partner or when the link partner is
-+	 * auto-negotiating. Starting the test will restart the AN
-+	 * automatically. It seems that doing this repeatedly we will
-+	 * get a slot where our link partner won't disturb our
-+	 * measurement.
-+	 */
-+	while (pair_mask && retries--) {
-+		for_each_set_bit(pair, &pair_mask, 4) {
-+			ret = at803x_cable_test_one_pair(phydev, pair);
-+			if (ret < 0)
-+				return ret;
-+			if (ret)
-+				clear_bit(pair, &pair_mask);
-+		}
-+		if (pair_mask)
-+			msleep(250);
-+	}
-+
-+	*finished = true;
-+
-+	return 0;
-+}
-+
-+static void at803x_cable_test_autoneg(struct phy_device *phydev)
-+{
-+	/* Enable auto-negotiation, but advertise no capabilities, no link
-+	 * will be established. A restart of the auto-negotiation is not
-+	 * required, because the cable test will automatically break the link.
-+	 */
-+	phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
-+	phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA);
-+}
-+
-+static int at803x_cable_test_start(struct phy_device *phydev)
-+{
-+	at803x_cable_test_autoneg(phydev);
-+	/* we do all the (time consuming) work later */
-+	return 0;
-+}
-+
-+static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev,
-+					    unsigned int selector)
-+{
-+	struct phy_device *phydev = rdev_get_drvdata(rdev);
-+
-+	if (selector)
-+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-+					     0, AT803X_DEBUG_RGMII_1V8);
-+	else
-+		return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F,
-+					     AT803X_DEBUG_RGMII_1V8, 0);
-+}
-+
-+static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev)
-+{
-+	struct phy_device *phydev = rdev_get_drvdata(rdev);
-+	int val;
-+
-+	val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F);
-+	if (val < 0)
-+		return val;
-+
-+	return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0;
-+}
-+
-+static const struct regulator_ops vddio_regulator_ops = {
-+	.list_voltage = regulator_list_voltage_table,
-+	.set_voltage_sel = at8031_rgmii_reg_set_voltage_sel,
-+	.get_voltage_sel = at8031_rgmii_reg_get_voltage_sel,
-+};
-+
-+static const unsigned int vddio_voltage_table[] = {
-+	1500000,
-+	1800000,
-+};
-+
-+static const struct regulator_desc vddio_desc = {
-+	.name = "vddio",
-+	.of_match = of_match_ptr("vddio-regulator"),
-+	.n_voltages = ARRAY_SIZE(vddio_voltage_table),
-+	.volt_table = vddio_voltage_table,
-+	.ops = &vddio_regulator_ops,
-+	.type = REGULATOR_VOLTAGE,
-+	.owner = THIS_MODULE,
-+};
-+
-+static const struct regulator_ops vddh_regulator_ops = {
-+};
-+
-+static const struct regulator_desc vddh_desc = {
-+	.name = "vddh",
-+	.of_match = of_match_ptr("vddh-regulator"),
-+	.n_voltages = 1,
-+	.fixed_uV = 2500000,
-+	.ops = &vddh_regulator_ops,
-+	.type = REGULATOR_VOLTAGE,
-+	.owner = THIS_MODULE,
-+};
-+
-+static int at8031_register_regulators(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	struct device *dev = &phydev->mdio.dev;
-+	struct regulator_config config = { };
-+
-+	config.dev = dev;
-+	config.driver_data = phydev;
-+
-+	priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config);
-+	if (IS_ERR(priv->vddio_rdev)) {
-+		phydev_err(phydev, "failed to register VDDIO regulator\n");
-+		return PTR_ERR(priv->vddio_rdev);
-+	}
-+
-+	priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config);
-+	if (IS_ERR(priv->vddh_rdev)) {
-+		phydev_err(phydev, "failed to register VDDH regulator\n");
-+		return PTR_ERR(priv->vddh_rdev);
-+	}
-+
-+	return 0;
-+}
-+
-+static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+	struct phy_device *phydev = upstream;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support);
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
-+	DECLARE_PHY_INTERFACE_MASK(interfaces);
-+	phy_interface_t iface;
-+
-+	linkmode_zero(phy_support);
-+	phylink_set(phy_support, 1000baseX_Full);
-+	phylink_set(phy_support, 1000baseT_Full);
-+	phylink_set(phy_support, Autoneg);
-+	phylink_set(phy_support, Pause);
-+	phylink_set(phy_support, Asym_Pause);
-+
-+	linkmode_zero(sfp_support);
-+	sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces);
-+	/* Some modules support 10G modes as well as others we support.
-+	 * Mask out non-supported modes so the correct interface is picked.
-+	 */
-+	linkmode_and(sfp_support, phy_support, sfp_support);
-+
-+	if (linkmode_empty(sfp_support)) {
-+		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-+		return -EINVAL;
-+	}
-+
-+	iface = sfp_select_interface(phydev->sfp_bus, sfp_support);
-+
-+	/* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes
-+	 * interface for use with SFP modules.
-+	 * However, some copper modules detected as having a preferred SGMII
-+	 * interface do default to and function in 1000Base-X mode, so just
-+	 * print a warning and allow such modules, as they may have some chance
-+	 * of working.
-+	 */
-+	if (iface == PHY_INTERFACE_MODE_SGMII)
-+		dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n");
-+	else if (iface != PHY_INTERFACE_MODE_1000BASEX)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static const struct sfp_upstream_ops at8031_sfp_ops = {
-+	.attach = phy_sfp_attach,
-+	.detach = phy_sfp_detach,
-+	.module_insert = at8031_sfp_insert,
-+};
-+
-+static int at8031_parse_dt(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	struct at803x_priv *priv = phydev->priv;
-+	int ret;
-+
-+	if (of_property_read_bool(node, "qca,keep-pll-enabled"))
-+		priv->flags |= AT803X_KEEP_PLL_ENABLED;
-+
-+	ret = at8031_register_regulators(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = devm_regulator_get_enable_optional(&phydev->mdio.dev,
-+						 "vddio");
-+	if (ret) {
-+		phydev_err(phydev, "failed to get VDDIO regulator\n");
-+		return ret;
-+	}
-+
-+	/* Only AR8031/8033 support 1000Base-X for SFP modules */
-+	return phy_sfp_probe(phydev, &at8031_sfp_ops);
-+}
-+
-+static int at8031_probe(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	int mode_cfg;
-+	int ccr;
-+	int ret;
-+
-+	ret = at803x_probe(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
-+	 * options.
-+	 */
-+	ret = at8031_parse_dt(phydev);
-+	if (ret)
-+		return ret;
-+
-+	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+	if (ccr < 0)
-+		return ccr;
-+	mode_cfg = ccr & AT803X_MODE_CFG_MASK;
-+
-+	switch (mode_cfg) {
-+	case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
-+	case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
-+		priv->is_1000basex = true;
-+		fallthrough;
-+	case AT803X_MODE_CFG_FX100_RGMII_50OHM:
-+	case AT803X_MODE_CFG_FX100_RGMII_75OHM:
-+		priv->is_fiber = true;
-+		break;
-+	}
-+
-+	/* Disable WoL in 1588 register which is enabled
-+	 * by default
-+	 */
-+	return phy_modify_mmd(phydev, MDIO_MMD_PCS,
-+			      AT803X_PHY_MMD3_WOL_CTRL,
-+			      AT803X_WOL_EN, 0);
-+}
-+
-+static int at8031_config_init(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	int ret;
-+
-+	/* Some bootloaders leave the fiber page selected.
-+	 * Switch to the appropriate page (fiber or copper), as otherwise we
-+	 * read the PHY capabilities from the wrong page.
-+	 */
-+	phy_lock_mdio_bus(phydev);
-+	ret = at803x_write_page(phydev,
-+				priv->is_fiber ? AT803X_PAGE_FIBER :
-+						 AT803X_PAGE_COPPER);
-+	phy_unlock_mdio_bus(phydev);
-+	if (ret)
-+		return ret;
-+
-+	ret = at8031_pll_config(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	return at803x_config_init(phydev);
-+}
-+
-+static int at8031_set_wol(struct phy_device *phydev,
-+			  struct ethtool_wolinfo *wol)
-+{
-+	int ret;
-+
-+	/* First setup MAC address and enable WOL interrupt */
-+	ret = at803x_set_wol(phydev, wol);
-+	if (ret)
-+		return ret;
-+
-+	if (wol->wolopts & WAKE_MAGIC)
-+		/* Enable WOL function for 1588 */
-+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-+				     AT803X_PHY_MMD3_WOL_CTRL,
-+				     0, AT803X_WOL_EN);
-+	else
-+		/* Disable WoL function for 1588 */
-+		ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
-+				     AT803X_PHY_MMD3_WOL_CTRL,
-+				     AT803X_WOL_EN, 0);
-+
-+	return ret;
-+}
-+
-+static int at8031_config_intr(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	int err, value = 0;
-+
-+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED &&
-+	    priv->is_fiber) {
-+		/* Clear any pending interrupts */
-+		err = at803x_ack_interrupt(phydev);
-+		if (err)
-+			return err;
-+
-+		value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
-+		value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
-+
-+		err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value);
-+		if (err)
-+			return err;
-+	}
-+
-+	return at803x_config_intr(phydev);
-+}
-+
-+/* AR8031 and AR8033 share the same read status logic */
-+static int at8031_read_status(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+
-+	if (priv->is_1000basex)
-+		return genphy_c37_read_status(phydev);
-+
-+	return at803x_read_status(phydev);
-+}
-+
-+/* AR8031 and AR8035 share the same cable test get status reg */
-+static int at8031_cable_test_get_status(struct phy_device *phydev,
-+					bool *finished)
-+{
-+	return at803x_cable_test_get_status(phydev, finished, 0xf);
-+}
-+
-+/* AR8031 and AR8035 share the same cable test start logic */
-+static int at8031_cable_test_start(struct phy_device *phydev)
-+{
-+	at803x_cable_test_autoneg(phydev);
-+	phy_write(phydev, MII_CTRL1000, 0);
-+	/* we do all the (time consuming) work later */
-+	return 0;
-+}
-+
-+/* AR8032, AR9331 and QCA9561 share the same cable test get status reg */
-+static int at8032_cable_test_get_status(struct phy_device *phydev,
-+					bool *finished)
-+{
-+	return at803x_cable_test_get_status(phydev, finished, 0x3);
-+}
-+
-+static int at8035_parse_dt(struct phy_device *phydev)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+
-+	/* Mask is set by the generic at803x_parse_dt
-+	 * if property is set. Assume property is set
-+	 * with the mask not zero.
-+	 */
-+	if (priv->clk_25m_mask) {
-+		/* Fixup for the AR8030/AR8035. This chip has another mask and
-+		 * doesn't support the DSP reference. Eg. the lowest bit of the
-+		 * mask. The upper two bits select the same frequencies. Mask
-+		 * the lowest bit here.
-+		 *
-+		 * Warning:
-+		 *   There was no datasheet for the AR8030 available so this is
-+		 *   just a guess. But the AR8035 is listed as pin compatible
-+		 *   to the AR8030 so there might be a good chance it works on
-+		 *   the AR8030 too.
-+		 */
-+		priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
-+		priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
-+	}
-+
-+	return 0;
-+}
-+
-+/* AR8030 and AR8035 shared the same special mask for clk_25m */
-+static int at8035_probe(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = at803x_probe(phydev);
-+	if (ret)
-+		return ret;
-+
-+	return at8035_parse_dt(phydev);
-+}
-+
-+static int qca83xx_config_init(struct phy_device *phydev)
-+{
-+	u8 switch_revision;
-+
-+	switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
-+
-+	switch (switch_revision) {
-+	case 1:
-+		/* For 100M waveform */
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
-+		/* Turn on Gigabit clock */
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
-+		break;
-+
-+	case 2:
-+		phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
-+		fallthrough;
-+	case 4:
-+		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
-+		break;
-+	}
-+
-+	/* Following original QCA sourcecode set port to prefer master */
-+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
-+
-+	return 0;
-+}
-+
-+static int qca8327_config_init(struct phy_device *phydev)
-+{
-+	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
-+	 * Disable on init and enable only with 100m speed following
-+	 * qca original source code.
-+	 */
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-+			      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-+
-+	return qca83xx_config_init(phydev);
-+}
-+
-+static void qca83xx_link_change_notify(struct phy_device *phydev)
-+{
-+	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
-+	if (phydev->state == PHY_RUNNING) {
-+		if (phydev->speed == SPEED_100)
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-+					      QCA8327_DEBUG_MANU_CTRL_EN,
-+					      QCA8327_DEBUG_MANU_CTRL_EN);
-+	} else {
-+		/* Reset DAC Amplitude adjustment */
-+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-+				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-+	}
-+}
-+
-+static int qca83xx_resume(struct phy_device *phydev)
-+{
-+	int ret, val;
-+
-+	/* Skip reset if not suspended */
-+	if (!phydev->suspended)
-+		return 0;
-+
-+	/* Reinit the port, reset values set by suspend */
-+	qca83xx_config_init(phydev);
-+
-+	/* Reset the port on port resume */
-+	phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
-+
-+	/* On resume from suspend the switch execute a reset and
-+	 * restart auto-negotiation. Wait for reset to complete.
-+	 */
-+	ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
-+				    50000, 600000, true);
-+	if (ret)
-+		return ret;
-+
-+	usleep_range(1000, 2000);
-+
-+	return 0;
-+}
-+
-+static int qca83xx_suspend(struct phy_device *phydev)
-+{
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
-+			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
-+
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
-+			      AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
-+			      AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
-+
-+	return 0;
-+}
-+
-+static int qca8337_suspend(struct phy_device *phydev)
-+{
-+	/* Only QCA8337 support actual suspend. */
-+	genphy_suspend(phydev);
-+
-+	return qca83xx_suspend(phydev);
-+}
-+
-+static int qca8327_suspend(struct phy_device *phydev)
-+{
-+	u16 mask = 0;
-+
-+	/* QCA8327 cause port unreliability when phy suspend
-+	 * is set.
-+	 */
-+	mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
-+	phy_modify(phydev, MII_BMCR, mask, 0);
-+
-+	return qca83xx_suspend(phydev);
-+}
-+
-+static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* Enable fast retrain */
-+	ret = genphy_c45_fast_retrain(phydev, true);
-+	if (ret)
-+		return ret;
-+
-+	phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
-+		      QCA808X_TOP_OPTION1_DATA);
-+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
-+		      QCA808X_MSE_THRESHOLD_20DB_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
-+		      QCA808X_MSE_THRESHOLD_17DB_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
-+		      QCA808X_MSE_THRESHOLD_27DB_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
-+		      QCA808X_MSE_THRESHOLD_28DB_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
-+		      QCA808X_MMD3_DEBUG_1_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
-+		      QCA808X_MMD3_DEBUG_4_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
-+		      QCA808X_MMD3_DEBUG_5_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
-+		      QCA808X_MMD3_DEBUG_3_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
-+		      QCA808X_MMD3_DEBUG_6_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
-+		      QCA808X_MMD3_DEBUG_2_VALUE);
-+
-+	return 0;
-+}
-+
-+static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
-+{
-+	u16 seed_value;
-+
-+	if (!enable)
-+		return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
-+				QCA808X_MASTER_SLAVE_SEED_ENABLE, 0);
-+
-+	seed_value = prandom_u32_max(QCA808X_MASTER_SLAVE_SEED_RANGE);
-+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
-+			QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE,
-+			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) |
-+			QCA808X_MASTER_SLAVE_SEED_ENABLE);
-+}
-+
-+static bool qca808x_is_prefer_master(struct phy_device *phydev)
-+{
-+	return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) ||
-+		(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
-+}
-+
-+static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
-+{
-+	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
-+}
-+
-+static int qca808x_config_init(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* Active adc&vga on 802.3az for the link 1000M and 100M */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
-+			     QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
-+	if (ret)
-+		return ret;
-+
-+	/* Adjust the threshold on 802.3az for the link 1000M */
-+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
-+			    QCA808X_PHY_MMD3_AZ_TRAINING_CTRL,
-+			    QCA808X_MMD3_AZ_TRAINING_VAL);
-+	if (ret)
-+		return ret;
-+
-+	if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
-+		/* Config the fast retrain for the link 2500M */
-+		ret = qca808x_phy_fast_retrain_config(phydev);
-+		if (ret)
-+			return ret;
-+
-+		ret = genphy_read_master_slave(phydev);
-+		if (ret < 0)
-+			return ret;
-+
-+		if (!qca808x_is_prefer_master(phydev)) {
-+			/* Enable seed and configure lower ramdom seed to make phy
-+			 * linked as slave mode.
-+			 */
-+			ret = qca808x_phy_ms_seed_enable(phydev, true);
-+			if (ret)
-+				return ret;
-+		}
-+	}
-+
-+	/* Configure adc threshold as 100mv for the link 10M */
-+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
-+				     QCA808X_ADC_THRESHOLD_MASK,
-+				     QCA808X_ADC_THRESHOLD_100MV);
-+}
-+
-+static int qca808x_read_status(struct phy_device *phydev)
-+{
-+	struct at803x_ss_mask ss_mask = { 0 };
-+	int ret;
-+
-+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
-+	if (ret < 0)
-+		return ret;
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
-+			 ret & MDIO_AN_10GBT_STAT_LP2_5G);
-+
-+	ret = genphy_read_status(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* qca8081 takes the different bits for speed value from at803x */
-+	ss_mask.speed_mask = QCA808X_SS_SPEED_MASK;
-+	ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK);
-+	ret = at803x_read_specific_status(phydev, ss_mask);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (phydev->link) {
-+		if (phydev->speed == SPEED_2500)
-+			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-+		else
-+			phydev->interface = PHY_INTERFACE_MODE_SGMII;
-+	} else {
-+		/* generate seed as a lower random value to make PHY linked as SLAVE easily,
-+		 * except for master/slave configuration fault detected or the master mode
-+		 * preferred.
-+		 *
-+		 * the reason for not putting this code into the function link_change_notify is
-+		 * the corner case where the link partner is also the qca8081 PHY and the seed
-+		 * value is configured as the same value, the link can't be up and no link change
-+		 * occurs.
-+		 */
-+		if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
-+			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
-+			    qca808x_is_prefer_master(phydev)) {
-+				qca808x_phy_ms_seed_enable(phydev, false);
-+			} else {
-+				qca808x_phy_ms_seed_enable(phydev, true);
-+			}
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int qca808x_soft_reset(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = genphy_soft_reset(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (qca808x_has_fast_retrain_or_slave_seed(phydev))
-+		ret = qca808x_phy_ms_seed_enable(phydev, true);
-+
-+	return ret;
-+}
-+
-+static bool qca808x_cdt_fault_length_valid(int cdt_code)
-+{
-+	switch (cdt_code) {
-+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
-+		return true;
-+	default:
-+		return false;
-+	}
-+}
-+
-+static int qca808x_cable_test_result_trans(int cdt_code)
-+{
-+	switch (cdt_code) {
-+	case QCA808X_CDT_STATUS_STAT_NORMAL:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
-+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
-+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
-+	case QCA808X_CDT_STATUS_STAT_FAIL:
-+	default:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
-+	}
-+}
-+
-+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
-+				    int result)
-+{
-+	int val;
-+	u32 cdt_length_reg = 0;
-+
-+	switch (pair) {
-+	case ETHTOOL_A_CABLE_PAIR_A:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_B:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_C:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_D:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
-+	if (val < 0)
-+		return val;
-+
-+	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
-+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
-+	else
-+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
-+
-+	return at803x_cdt_fault_length(val);
-+}
-+
-+static int qca808x_cable_test_start(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* perform CDT with the following configs:
-+	 * 1. disable hibernation.
-+	 * 2. force PHY working in MDI mode.
-+	 * 3. for PHY working in 1000BaseT.
-+	 * 4. configure the threshold.
-+	 */
-+
-+	ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = at803x_config_mdix(phydev, ETH_TP_MDI);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
-+	phydev->duplex = DUPLEX_FULL;
-+	phydev->speed = SPEED_1000;
-+	ret = genphy_c45_pma_setup_forced(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = genphy_setup_forced(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* configure the thresholds for open, short, pair ok test */
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
-+
-+	return 0;
-+}
-+
-+static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
-+					      u16 status)
-+{
-+	int length, result;
-+	u16 pair_code;
-+
-+	switch (pair) {
-+	case ETHTOOL_A_CABLE_PAIR_A:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_B:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_C:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_D:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	result = qca808x_cable_test_result_trans(pair_code);
-+	ethnl_cable_test_result(phydev, pair, result);
-+
-+	if (qca808x_cdt_fault_length_valid(pair_code)) {
-+		length = qca808x_cdt_fault_length(phydev, pair, result);
-+		ethnl_cable_test_fault_length(phydev, pair, length);
-+	}
-+
-+	return 0;
-+}
-+
-+static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
-+{
-+	int ret, val;
-+
-+	*finished = false;
-+
-+	val = QCA808X_CDT_ENABLE_TEST |
-+	      QCA808X_CDT_LENGTH_UNIT;
-+	ret = at803x_cdt_start(phydev, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
-+	if (ret)
-+		return ret;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
-+	if (val < 0)
-+		return val;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
-+	if (ret)
-+		return ret;
-+
-+	*finished = true;
-+
-+	return 0;
-+}
-+
-+static int qca808x_get_features(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = genphy_c45_pma_read_abilities(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* The autoneg ability is not existed in bit3 of MMD7.1,
-+	 * but it is supported by qca808x PHY, so we add it here
-+	 * manually.
-+	 */
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
-+
-+	/* As for the qca8081 1G version chip, the 2500baseT ability is also
-+	 * existed in the bit0 of MMD1.21, we need to remove it manually if
-+	 * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
-+	 */
-+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
-+		linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
-+
-+	return 0;
-+}
-+
-+static int qca808x_config_aneg(struct phy_device *phydev)
-+{
-+	int phy_ctrl = 0;
-+	int ret;
-+
-+	ret = at803x_prepare_config_aneg(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* The reg MII_BMCR also needs to be configured for force mode, the
-+	 * genphy_config_aneg is also needed.
-+	 */
-+	if (phydev->autoneg == AUTONEG_DISABLE)
-+		genphy_c45_pma_setup_forced(phydev);
-+
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
-+		phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
-+
-+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-+				     MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
-+	if (ret < 0)
-+		return ret;
-+
-+	return __genphy_config_aneg(phydev, ret);
-+}
-+
-+static void qca808x_link_change_notify(struct phy_device *phydev)
-+{
-+	/* Assert interface sgmii fifo on link down, deassert it on link up,
-+	 * the interface device address is always phy address added by 1.
-+	 */
-+	mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
-+				   MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
-+				   QCA8081_PHY_FIFO_RSTN,
-+				   phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
-+}
-+
-+static int qca808x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
-+				    u16 *offload_trigger)
-+{
-+	/* Parsing specific to netdev trigger */
-+	if (test_bit(TRIGGER_NETDEV_TX, &rules))
-+		*offload_trigger |= QCA808X_LED_TX_BLINK;
-+	if (test_bit(TRIGGER_NETDEV_RX, &rules))
-+		*offload_trigger |= QCA808X_LED_RX_BLINK;
-+	if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED10_ON;
-+	if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED100_ON;
-+	if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED1000_ON;
-+	if (test_bit(TRIGGER_NETDEV_LINK_2500, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED2500_ON;
-+	if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
-+		*offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
-+	if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
-+		*offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
-+
-+	if (rules && !*offload_trigger)
-+		return -EOPNOTSUPP;
-+
-+	/* Enable BLINK_CHECK_BYPASS by default to make the LED
-+	 * blink even with duplex or speed mode not enabled.
-+	 */
-+	*offload_trigger |= QCA808X_LED_BLINK_CHECK_BYPASS;
-+
-+	return 0;
-+}
-+
-+static int qca808x_led_hw_control_enable(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
-+				  QCA808X_LED_FORCE_EN);
-+}
-+
-+static int qca808x_led_hw_is_supported(struct phy_device *phydev, u8 index,
-+				       unsigned long rules)
-+{
-+	u16 offload_trigger = 0;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	return qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
-+}
-+
-+static int qca808x_led_hw_control_set(struct phy_device *phydev, u8 index,
-+				      unsigned long rules)
-+{
-+	u16 reg, offload_trigger = 0;
-+	int ret;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_CTRL(index);
-+
-+	ret = qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_led_hw_control_enable(phydev, index);
-+	if (ret)
-+		return ret;
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			      QCA808X_LED_PATTERN_MASK,
-+			      offload_trigger);
-+}
-+
-+static bool qca808x_led_hw_control_status(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+	int val;
-+
-+	if (index > 2)
-+		return false;
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-+
-+	return !(val & QCA808X_LED_FORCE_EN);
-+}
-+
-+static int qca808x_led_hw_control_get(struct phy_device *phydev, u8 index,
-+				      unsigned long *rules)
-+{
-+	u16 reg;
-+	int val;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	/* Check if we have hw control enabled */
-+	if (qca808x_led_hw_control_status(phydev, index))
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_CTRL(index);
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-+	if (val & QCA808X_LED_TX_BLINK)
-+		set_bit(TRIGGER_NETDEV_TX, rules);
-+	if (val & QCA808X_LED_RX_BLINK)
-+		set_bit(TRIGGER_NETDEV_RX, rules);
-+	if (val & QCA808X_LED_SPEED10_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_10, rules);
-+	if (val & QCA808X_LED_SPEED100_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_100, rules);
-+	if (val & QCA808X_LED_SPEED1000_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_1000, rules);
-+	if (val & QCA808X_LED_SPEED2500_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_2500, rules);
-+	if (val & QCA808X_LED_HALF_DUPLEX_ON)
-+		set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
-+	if (val & QCA808X_LED_FULL_DUPLEX_ON)
-+		set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
-+
-+	return 0;
-+}
-+
-+static int qca808x_led_hw_control_reset(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_CTRL(index);
-+
-+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
-+				  QCA808X_LED_PATTERN_MASK);
-+}
-+
-+static int qca808x_led_brightness_set(struct phy_device *phydev,
-+				      u8 index, enum led_brightness value)
-+{
-+	u16 reg;
-+	int ret;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	if (!value) {
-+		ret = qca808x_led_hw_control_reset(phydev, index);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			      QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
-+			      QCA808X_LED_FORCE_EN | value ? QCA808X_LED_FORCE_ON :
-+							     QCA808X_LED_FORCE_OFF);
-+}
-+
-+static int qca808x_led_blink_set(struct phy_device *phydev, u8 index,
-+				 unsigned long *delay_on,
-+				 unsigned long *delay_off)
-+{
-+	int ret;
-+	u16 reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	/* Set blink to 50% off, 50% on at 4Hz by default */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
-+			     QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
-+			     QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
-+	if (ret)
-+		return ret;
-+
-+	/* We use BLINK_1 for normal blinking */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
-+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
-+	if (ret)
-+		return ret;
-+
-+	/* We set blink to 4Hz, aka 250ms */
-+	*delay_on = 250 / 2;
-+	*delay_off = 250 / 2;
-+
-+	return 0;
-+}
-+
-+static int qca808x_led_polarity_set(struct phy_device *phydev, int index,
-+				    unsigned long modes)
-+{
-+	struct at803x_priv *priv = phydev->priv;
-+	bool active_low = false;
-+	u32 mode;
-+
-+	for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
-+		switch (mode) {
-+		case PHY_LED_ACTIVE_LOW:
-+			active_low = true;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+	}
-+
-+	/* PHY polarity is global and can't be set per LED.
-+	 * To detect this, check if last requested polarity mode
-+	 * match the new one.
-+	 */
-+	if (priv->led_polarity_mode >= 0 &&
-+	    priv->led_polarity_mode != active_low) {
-+		phydev_err(phydev, "PHY polarity is global. Mismatched polarity on different LED\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Save the last PHY polarity mode */
-+	priv->led_polarity_mode = active_low;
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN,
-+			      QCA808X_MMD7_LED_POLARITY_CTRL,
-+			      QCA808X_LED_ACTIVE_HIGH,
-+			      active_low ? 0 : QCA808X_LED_ACTIVE_HIGH);
-+}
-+
-+static struct phy_driver at803x_driver[] = {
-+{
-+	/* Qualcomm Atheros AR8035 */
-+	PHY_ID_MATCH_EXACT(ATH8035_PHY_ID),
-+	.name			= "Qualcomm Atheros AR8035",
-+	.flags			= PHY_POLL_CABLE_TEST,
-+	.probe			= at8035_probe,
-+	.config_aneg		= at803x_config_aneg,
-+	.config_init		= at803x_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.set_wol		= at803x_set_wol,
-+	.get_wol		= at803x_get_wol,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	/* PHY_GBIT_FEATURES */
-+	.read_status		= at803x_read_status,
-+	.config_intr		= at803x_config_intr,
-+	.handle_interrupt	= at803x_handle_interrupt,
-+	.get_tunable		= at803x_get_tunable,
-+	.set_tunable		= at803x_set_tunable,
-+	.cable_test_start	= at8031_cable_test_start,
-+	.cable_test_get_status	= at8031_cable_test_get_status,
-+}, {
-+	/* Qualcomm Atheros AR8030 */
-+	.phy_id			= ATH8030_PHY_ID,
-+	.name			= "Qualcomm Atheros AR8030",
-+	.phy_id_mask		= AT8030_PHY_ID_MASK,
-+	.probe			= at8035_probe,
-+	.config_init		= at803x_config_init,
-+	.link_change_notify	= at803x_link_change_notify,
-+	.set_wol		= at803x_set_wol,
-+	.get_wol		= at803x_get_wol,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	/* PHY_BASIC_FEATURES */
-+	.config_intr		= at803x_config_intr,
-+	.handle_interrupt	= at803x_handle_interrupt,
-+}, {
-+	/* Qualcomm Atheros AR8031/AR8033 */
-+	PHY_ID_MATCH_EXACT(ATH8031_PHY_ID),
-+	.name			= "Qualcomm Atheros AR8031/AR8033",
-+	.flags			= PHY_POLL_CABLE_TEST,
-+	.probe			= at8031_probe,
-+	.config_init		= at8031_config_init,
-+	.config_aneg		= at803x_config_aneg,
-+	.soft_reset		= genphy_soft_reset,
-+	.set_wol		= at8031_set_wol,
-+	.get_wol		= at803x_get_wol,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	.read_page		= at803x_read_page,
-+	.write_page		= at803x_write_page,
-+	.get_features		= at803x_get_features,
-+	.read_status		= at8031_read_status,
-+	.config_intr		= at8031_config_intr,
-+	.handle_interrupt	= at803x_handle_interrupt,
-+	.get_tunable		= at803x_get_tunable,
-+	.set_tunable		= at803x_set_tunable,
-+	.cable_test_start	= at8031_cable_test_start,
-+	.cable_test_get_status	= at8031_cable_test_get_status,
-+}, {
-+	/* Qualcomm Atheros AR8032 */
-+	PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),
-+	.name			= "Qualcomm Atheros AR8032",
-+	.probe			= at803x_probe,
-+	.flags			= PHY_POLL_CABLE_TEST,
-+	.config_init		= at803x_config_init,
-+	.link_change_notify	= at803x_link_change_notify,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	/* PHY_BASIC_FEATURES */
-+	.config_intr		= at803x_config_intr,
-+	.handle_interrupt	= at803x_handle_interrupt,
-+	.cable_test_start	= at803x_cable_test_start,
-+	.cable_test_get_status	= at8032_cable_test_get_status,
-+}, {
-+	/* ATHEROS AR9331 */
-+	PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
-+	.name			= "Qualcomm Atheros AR9331 built-in PHY",
-+	.probe			= at803x_probe,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	.flags			= PHY_POLL_CABLE_TEST,
-+	/* PHY_BASIC_FEATURES */
-+	.config_intr		= at803x_config_intr,
-+	.handle_interrupt	= at803x_handle_interrupt,
-+	.cable_test_start	= at803x_cable_test_start,
-+	.cable_test_get_status	= at8032_cable_test_get_status,
-+	.read_status		= at803x_read_status,
-+	.soft_reset		= genphy_soft_reset,
-+	.config_aneg		= at803x_config_aneg,
-+}, {
-+	/* Qualcomm Atheros QCA9561 */
-+	PHY_ID_MATCH_EXACT(QCA9561_PHY_ID),
-+	.name			= "Qualcomm Atheros QCA9561 built-in PHY",
-+	.probe			= at803x_probe,
-+	.suspend		= at803x_suspend,
-+	.resume			= at803x_resume,
-+	.flags			= PHY_POLL_CABLE_TEST,
-+	/* PHY_BASIC_FEATURES */
-+	.config_intr		= at803x_config_intr,
-+	.handle_interrupt	= at803x_handle_interrupt,
-+	.cable_test_start	= at803x_cable_test_start,
-+	.cable_test_get_status	= at8032_cable_test_get_status,
-+	.read_status		= at803x_read_status,
-+	.soft_reset		= genphy_soft_reset,
-+	.config_aneg		= at803x_config_aneg,
-+}, {
-+	/* QCA8337 */
-+	.phy_id			= QCA8337_PHY_ID,
-+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-+	.name			= "Qualcomm Atheros 8337 internal PHY",
-+	/* PHY_GBIT_FEATURES */
-+	.probe			= at803x_probe,
-+	.flags			= PHY_IS_INTERNAL,
-+	.config_init		= qca83xx_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.get_sset_count		= qca83xx_get_sset_count,
-+	.get_strings		= qca83xx_get_strings,
-+	.get_stats		= qca83xx_get_stats,
-+	.suspend		= qca8337_suspend,
-+	.resume			= qca83xx_resume,
-+}, {
-+	/* QCA8327-A from switch QCA8327-AL1A */
-+	.phy_id			= QCA8327_A_PHY_ID,
-+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-+	.name			= "Qualcomm Atheros 8327-A internal PHY",
-+	/* PHY_GBIT_FEATURES */
-+	.link_change_notify	= qca83xx_link_change_notify,
-+	.probe			= at803x_probe,
-+	.flags			= PHY_IS_INTERNAL,
-+	.config_init		= qca8327_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.get_sset_count		= qca83xx_get_sset_count,
-+	.get_strings		= qca83xx_get_strings,
-+	.get_stats		= qca83xx_get_stats,
-+	.suspend		= qca8327_suspend,
-+	.resume			= qca83xx_resume,
-+}, {
-+	/* QCA8327-B from switch QCA8327-BL1A */
-+	.phy_id			= QCA8327_B_PHY_ID,
-+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-+	.name			= "Qualcomm Atheros 8327-B internal PHY",
-+	/* PHY_GBIT_FEATURES */
-+	.link_change_notify	= qca83xx_link_change_notify,
-+	.probe			= at803x_probe,
-+	.flags			= PHY_IS_INTERNAL,
-+	.config_init		= qca8327_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.get_sset_count		= qca83xx_get_sset_count,
-+	.get_strings		= qca83xx_get_strings,
-+	.get_stats		= qca83xx_get_stats,
-+	.suspend		= qca8327_suspend,
-+	.resume			= qca83xx_resume,
-+}, {
-+	/* Qualcomm QCA8081 */
-+	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
-+	.name			= "Qualcomm QCA8081",
-+	.flags			= PHY_POLL_CABLE_TEST,
-+	.probe			= at803x_probe,
-+	.config_intr		= at803x_config_intr,
-+	.handle_interrupt	= at803x_handle_interrupt,
-+	.get_tunable		= at803x_get_tunable,
-+	.set_tunable		= at803x_set_tunable,
-+	.set_wol		= at803x_set_wol,
-+	.get_wol		= at803x_get_wol,
-+	.get_features		= qca808x_get_features,
-+	.config_aneg		= qca808x_config_aneg,
-+	.suspend		= genphy_suspend,
-+	.resume			= genphy_resume,
-+	.read_status		= qca808x_read_status,
-+	.config_init		= qca808x_config_init,
-+	.soft_reset		= qca808x_soft_reset,
-+	.cable_test_start	= qca808x_cable_test_start,
-+	.cable_test_get_status	= qca808x_cable_test_get_status,
-+	.link_change_notify	= qca808x_link_change_notify,
-+	.led_brightness_set	= qca808x_led_brightness_set,
-+	.led_blink_set		= qca808x_led_blink_set,
-+	.led_hw_is_supported	= qca808x_led_hw_is_supported,
-+	.led_hw_control_set	= qca808x_led_hw_control_set,
-+	.led_hw_control_get	= qca808x_led_hw_control_get,
-+	.led_polarity_set	= qca808x_led_polarity_set,
-+}, };
-+
-+module_phy_driver(at803x_driver);
-+
-+static struct mdio_device_id __maybe_unused atheros_tbl[] = {
-+	{ ATH8030_PHY_ID, AT8030_PHY_ID_MASK },
-+	{ PHY_ID_MATCH_EXACT(ATH8031_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(mdio, atheros_tbl);
diff --git a/target/linux/generic/backport-6.1/713-v6.9-02-net-phy-qcom-create-and-move-functions-to-shared-lib.patch b/target/linux/generic/backport-6.1/713-v6.9-02-net-phy-qcom-create-and-move-functions-to-shared-lib.patch
deleted file mode 100644
index 7d0e1f4a285d..000000000000
--- a/target/linux/generic/backport-6.1/713-v6.9-02-net-phy-qcom-create-and-move-functions-to-shared-lib.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-From 6fb760972c49490b03f3db2ad64cf30bdd28c54a Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 Jan 2024 15:15:20 +0100
-Subject: [PATCH 2/5] net: phy: qcom: create and move functions to shared
- library
-
-Create and move functions to shared library in preparation for qca83xx
-PHY Family to be detached from at803x driver.
-
-Only the shared defines are moved to the shared qcom.h header.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240129141600.2592-3-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/qcom/Kconfig        |  4 ++
- drivers/net/phy/qcom/Makefile       |  1 +
- drivers/net/phy/qcom/at803x.c       | 69 +----------------------------
- drivers/net/phy/qcom/qcom-phy-lib.c | 53 ++++++++++++++++++++++
- drivers/net/phy/qcom/qcom.h         | 34 ++++++++++++++
- 5 files changed, 94 insertions(+), 67 deletions(-)
- create mode 100644 drivers/net/phy/qcom/qcom-phy-lib.c
- create mode 100644 drivers/net/phy/qcom/qcom.h
-
---- a/drivers/net/phy/qcom/Kconfig
-+++ b/drivers/net/phy/qcom/Kconfig
-@@ -1,6 +1,10 @@
- # SPDX-License-Identifier: GPL-2.0-only
-+config QCOM_NET_PHYLIB
-+	tristate
-+
- config AT803X_PHY
- 	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
-+	select QCOM_NET_PHYLIB
- 	depends on REGULATOR
- 	help
- 	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
---- a/drivers/net/phy/qcom/Makefile
-+++ b/drivers/net/phy/qcom/Makefile
-@@ -1,2 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
-+obj-$(CONFIG_QCOM_NET_PHYLIB)	+= qcom-phy-lib.o
- obj-$(CONFIG_AT803X_PHY)	+= at803x.o
---- a/drivers/net/phy/qcom/at803x.c
-+++ b/drivers/net/phy/qcom/at803x.c
-@@ -22,6 +22,8 @@
- #include <linux/sfp.h>
- #include <dt-bindings/net/qca-ar803x.h>
- 
-+#include "qcom.h"
-+
- #define AT803X_SPECIFIC_FUNCTION_CONTROL	0x10
- #define AT803X_SFC_ASSERT_CRS			BIT(11)
- #define AT803X_SFC_FORCE_LINK			BIT(10)
-@@ -84,9 +86,6 @@
- #define AT803X_REG_CHIP_CONFIG			0x1f
- #define AT803X_BT_BX_REG_SEL			0x8000
- 
--#define AT803X_DEBUG_ADDR			0x1D
--#define AT803X_DEBUG_DATA			0x1E
--
- #define AT803X_MODE_CFG_MASK			0x0F
- #define AT803X_MODE_CFG_BASET_RGMII		0x00
- #define AT803X_MODE_CFG_BASET_SGMII		0x01
-@@ -103,19 +102,6 @@
- #define AT803X_PSSR				0x11	/*PHY-Specific Status Register*/
- #define AT803X_PSSR_MR_AN_COMPLETE		0x0200
- 
--#define AT803X_DEBUG_ANALOG_TEST_CTRL		0x00
--#define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
--#define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
--#define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
--
--#define AT803X_DEBUG_SYSTEM_CTRL_MODE		0x05
--#define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
--
--#define AT803X_DEBUG_REG_HIB_CTRL		0x0b
--#define   AT803X_DEBUG_HIB_CTRL_SEL_RST_80U	BIT(10)
--#define   AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE	BIT(13)
--#define   AT803X_DEBUG_HIB_CTRL_PS_HIB_EN	BIT(15)
--
- #define AT803X_DEBUG_REG_3C			0x3C
- 
- #define AT803X_DEBUG_REG_GREEN			0x3D
-@@ -393,18 +379,6 @@ MODULE_DESCRIPTION("Qualcomm Atheros AR8
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
- 
--enum stat_access_type {
--	PHY,
--	MMD
--};
--
--struct at803x_hw_stat {
--	const char *string;
--	u8 reg;
--	u32 mask;
--	enum stat_access_type access_type;
--};
--
- static struct at803x_hw_stat qca83xx_hw_stats[] = {
- 	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
- 	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
-@@ -439,45 +413,6 @@ struct at803x_context {
- 	u16 led_control;
- };
- 
--static int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data)
--{
--	int ret;
--
--	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
--	if (ret < 0)
--		return ret;
--
--	return phy_write(phydev, AT803X_DEBUG_DATA, data);
--}
--
--static int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
--{
--	int ret;
--
--	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
--	if (ret < 0)
--		return ret;
--
--	return phy_read(phydev, AT803X_DEBUG_DATA);
--}
--
--static int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
--				 u16 clear, u16 set)
--{
--	u16 val;
--	int ret;
--
--	ret = at803x_debug_reg_read(phydev, reg);
--	if (ret < 0)
--		return ret;
--
--	val = ret & 0xffff;
--	val &= ~clear;
--	val |= set;
--
--	return phy_write(phydev, AT803X_DEBUG_DATA, val);
--}
--
- static int at803x_write_page(struct phy_device *phydev, int page)
- {
- 	int mask;
---- /dev/null
-+++ b/drivers/net/phy/qcom/qcom-phy-lib.c
-@@ -0,0 +1,53 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#include <linux/phy.h>
-+#include <linux/module.h>
-+
-+#include "qcom.h"
-+
-+MODULE_DESCRIPTION("Qualcomm PHY driver Common Functions");
-+MODULE_AUTHOR("Matus Ujhelyi");
-+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
-+MODULE_LICENSE("GPL");
-+
-+int at803x_debug_reg_read(struct phy_device *phydev, u16 reg)
-+{
-+	int ret;
-+
-+	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
-+	if (ret < 0)
-+		return ret;
-+
-+	return phy_read(phydev, AT803X_DEBUG_DATA);
-+}
-+EXPORT_SYMBOL_GPL(at803x_debug_reg_read);
-+
-+int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
-+			  u16 clear, u16 set)
-+{
-+	u16 val;
-+	int ret;
-+
-+	ret = at803x_debug_reg_read(phydev, reg);
-+	if (ret < 0)
-+		return ret;
-+
-+	val = ret & 0xffff;
-+	val &= ~clear;
-+	val |= set;
-+
-+	return phy_write(phydev, AT803X_DEBUG_DATA, val);
-+}
-+EXPORT_SYMBOL_GPL(at803x_debug_reg_mask);
-+
-+int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data)
-+{
-+	int ret;
-+
-+	ret = phy_write(phydev, AT803X_DEBUG_ADDR, reg);
-+	if (ret < 0)
-+		return ret;
-+
-+	return phy_write(phydev, AT803X_DEBUG_DATA, data);
-+}
-+EXPORT_SYMBOL_GPL(at803x_debug_reg_write);
---- /dev/null
-+++ b/drivers/net/phy/qcom/qcom.h
-@@ -0,0 +1,34 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+
-+#define AT803X_DEBUG_ADDR			0x1D
-+#define AT803X_DEBUG_DATA			0x1E
-+
-+#define AT803X_DEBUG_ANALOG_TEST_CTRL		0x00
-+#define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
-+#define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
-+#define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
-+
-+#define AT803X_DEBUG_SYSTEM_CTRL_MODE		0x05
-+#define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
-+
-+#define AT803X_DEBUG_REG_HIB_CTRL		0x0b
-+#define   AT803X_DEBUG_HIB_CTRL_SEL_RST_80U	BIT(10)
-+#define   AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE	BIT(13)
-+#define   AT803X_DEBUG_HIB_CTRL_PS_HIB_EN	BIT(15)
-+
-+enum stat_access_type {
-+	PHY,
-+	MMD
-+};
-+
-+struct at803x_hw_stat {
-+	const char *string;
-+	u8 reg;
-+	u32 mask;
-+	enum stat_access_type access_type;
-+};
-+
-+int at803x_debug_reg_read(struct phy_device *phydev, u16 reg);
-+int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
-+			  u16 clear, u16 set);
-+int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data);
diff --git a/target/linux/generic/backport-6.1/713-v6.9-03-net-phy-qcom-deatch-qca83xx-PHY-driver-from-at803x.patch b/target/linux/generic/backport-6.1/713-v6.9-03-net-phy-qcom-deatch-qca83xx-PHY-driver-from-at803x.patch
deleted file mode 100644
index 6ac09dcb9ab9..000000000000
--- a/target/linux/generic/backport-6.1/713-v6.9-03-net-phy-qcom-deatch-qca83xx-PHY-driver-from-at803x.patch
+++ /dev/null
@@ -1,638 +0,0 @@
-From 2e45d404d99d43bb7127b74b5dea8818df64996c Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 Jan 2024 15:15:21 +0100
-Subject: [PATCH 3/5] net: phy: qcom: deatch qca83xx PHY driver from at803x
-
-Deatch qca83xx PHY driver from at803x.
-
-The QCA83xx PHYs implement specific function and doesn't use generic
-at803x so it can be detached from the driver and moved to a dedicated
-one.
-
-Probe function and priv struct is reimplemented to allocate and use
-only the qca83xx specific data. Unused data from at803x PHY driver
-are dropped from at803x priv struct.
-
-This is to make slimmer PHY drivers instead of including lots of bloat
-that would never be used in specific SoC.
-
-A new Kconfig flag QCA83XX_PHY is introduced to compile the new
-introduced PHY driver.
-
-As the Kconfig name starts with Qualcomm the same order is kept.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240129141600.2592-4-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/qcom/Kconfig   |  11 +-
- drivers/net/phy/qcom/Makefile  |   1 +
- drivers/net/phy/qcom/at803x.c  | 235 ----------------------------
- drivers/net/phy/qcom/qca83xx.c | 275 +++++++++++++++++++++++++++++++++
- 4 files changed, 284 insertions(+), 238 deletions(-)
- create mode 100644 drivers/net/phy/qcom/qca83xx.c
-
---- a/drivers/net/phy/qcom/Kconfig
-+++ b/drivers/net/phy/qcom/Kconfig
-@@ -3,9 +3,14 @@ config QCOM_NET_PHYLIB
- 	tristate
- 
- config AT803X_PHY
--	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
-+	tristate "Qualcomm Atheros AR803X PHYs"
- 	select QCOM_NET_PHYLIB
- 	depends on REGULATOR
- 	help
--	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
--	  QCA8337(Internal qca8k PHY) model
-+	  Currently supports the AR8030, AR8031, AR8033, AR8035 model
-+
-+config QCA83XX_PHY
-+	tristate "Qualcomm Atheros QCA833x PHYs"
-+	select QCOM_NET_PHYLIB
-+	help
-+	  Currently supports the internal QCA8337(Internal qca8k PHY) model
---- a/drivers/net/phy/qcom/Makefile
-+++ b/drivers/net/phy/qcom/Makefile
-@@ -1,3 +1,4 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_QCOM_NET_PHYLIB)	+= qcom-phy-lib.o
- obj-$(CONFIG_AT803X_PHY)	+= at803x.o
-+obj-$(CONFIG_QCA83XX_PHY)	+= qca83xx.o
---- a/drivers/net/phy/qcom/at803x.c
-+++ b/drivers/net/phy/qcom/at803x.c
-@@ -102,17 +102,10 @@
- #define AT803X_PSSR				0x11	/*PHY-Specific Status Register*/
- #define AT803X_PSSR_MR_AN_COMPLETE		0x0200
- 
--#define AT803X_DEBUG_REG_3C			0x3C
--
--#define AT803X_DEBUG_REG_GREEN			0x3D
--#define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
--
- #define AT803X_DEBUG_REG_1F			0x1F
- #define AT803X_DEBUG_PLL_ON			BIT(2)
- #define AT803X_DEBUG_RGMII_1V8			BIT(3)
- 
--#define MDIO_AZ_DEBUG				0x800D
--
- /* AT803x supports either the XTAL input pad, an internal PLL or the
-  * DSP as clock reference for the clock output pad. The XTAL reference
-  * is only used for 25 MHz output, all other frequencies need the PLL.
-@@ -163,13 +156,7 @@
- 
- #define QCA8081_PHY_ID				0x004dd101
- 
--#define QCA8327_A_PHY_ID			0x004dd033
--#define QCA8327_B_PHY_ID			0x004dd034
--#define QCA8337_PHY_ID				0x004dd036
- #define QCA9561_PHY_ID				0x004dd042
--#define QCA8K_PHY_ID_MASK			0xffffffff
--
--#define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
- 
- #define AT803X_PAGE_FIBER			0
- #define AT803X_PAGE_COPPER			1
-@@ -379,12 +366,6 @@ MODULE_DESCRIPTION("Qualcomm Atheros AR8
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
- 
--static struct at803x_hw_stat qca83xx_hw_stats[] = {
--	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
--	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
--	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
--};
--
- struct at803x_ss_mask {
- 	u16 speed_mask;
- 	u8 speed_shift;
-@@ -400,7 +381,6 @@ struct at803x_priv {
- 	bool is_1000basex;
- 	struct regulator_dev *vddio_rdev;
- 	struct regulator_dev *vddh_rdev;
--	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
- 	int led_polarity_mode;
- };
- 
-@@ -564,53 +544,6 @@ static void at803x_get_wol(struct phy_de
- 		wol->wolopts |= WAKE_MAGIC;
- }
- 
--static int qca83xx_get_sset_count(struct phy_device *phydev)
--{
--	return ARRAY_SIZE(qca83xx_hw_stats);
--}
--
--static void qca83xx_get_strings(struct phy_device *phydev, u8 *data)
--{
--	int i;
--
--	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) {
--		strscpy(data + i * ETH_GSTRING_LEN,
--			qca83xx_hw_stats[i].string, ETH_GSTRING_LEN);
--	}
--}
--
--static u64 qca83xx_get_stat(struct phy_device *phydev, int i)
--{
--	struct at803x_hw_stat stat = qca83xx_hw_stats[i];
--	struct at803x_priv *priv = phydev->priv;
--	int val;
--	u64 ret;
--
--	if (stat.access_type == MMD)
--		val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
--	else
--		val = phy_read(phydev, stat.reg);
--
--	if (val < 0) {
--		ret = U64_MAX;
--	} else {
--		val = val & stat.mask;
--		priv->stats[i] += val;
--		ret = priv->stats[i];
--	}
--
--	return ret;
--}
--
--static void qca83xx_get_stats(struct phy_device *phydev,
--			      struct ethtool_stats *stats, u64 *data)
--{
--	int i;
--
--	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++)
--		data[i] = qca83xx_get_stat(phydev, i);
--}
--
- static int at803x_suspend(struct phy_device *phydev)
- {
- 	int value;
-@@ -1707,124 +1640,6 @@ static int at8035_probe(struct phy_devic
- 	return at8035_parse_dt(phydev);
- }
- 
--static int qca83xx_config_init(struct phy_device *phydev)
--{
--	u8 switch_revision;
--
--	switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
--
--	switch (switch_revision) {
--	case 1:
--		/* For 100M waveform */
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
--		/* Turn on Gigabit clock */
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
--		break;
--
--	case 2:
--		phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
--		fallthrough;
--	case 4:
--		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
--		break;
--	}
--
--	/* Following original QCA sourcecode set port to prefer master */
--	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
--
--	return 0;
--}
--
--static int qca8327_config_init(struct phy_device *phydev)
--{
--	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
--	 * Disable on init and enable only with 100m speed following
--	 * qca original source code.
--	 */
--	at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
--			      QCA8327_DEBUG_MANU_CTRL_EN, 0);
--
--	return qca83xx_config_init(phydev);
--}
--
--static void qca83xx_link_change_notify(struct phy_device *phydev)
--{
--	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
--	if (phydev->state == PHY_RUNNING) {
--		if (phydev->speed == SPEED_100)
--			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
--					      QCA8327_DEBUG_MANU_CTRL_EN,
--					      QCA8327_DEBUG_MANU_CTRL_EN);
--	} else {
--		/* Reset DAC Amplitude adjustment */
--		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
--				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
--	}
--}
--
--static int qca83xx_resume(struct phy_device *phydev)
--{
--	int ret, val;
--
--	/* Skip reset if not suspended */
--	if (!phydev->suspended)
--		return 0;
--
--	/* Reinit the port, reset values set by suspend */
--	qca83xx_config_init(phydev);
--
--	/* Reset the port on port resume */
--	phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
--
--	/* On resume from suspend the switch execute a reset and
--	 * restart auto-negotiation. Wait for reset to complete.
--	 */
--	ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
--				    50000, 600000, true);
--	if (ret)
--		return ret;
--
--	usleep_range(1000, 2000);
--
--	return 0;
--}
--
--static int qca83xx_suspend(struct phy_device *phydev)
--{
--	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
--			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
--
--	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
--			      AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
--			      AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
--
--	return 0;
--}
--
--static int qca8337_suspend(struct phy_device *phydev)
--{
--	/* Only QCA8337 support actual suspend. */
--	genphy_suspend(phydev);
--
--	return qca83xx_suspend(phydev);
--}
--
--static int qca8327_suspend(struct phy_device *phydev)
--{
--	u16 mask = 0;
--
--	/* QCA8327 cause port unreliability when phy suspend
--	 * is set.
--	 */
--	mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
--	phy_modify(phydev, MII_BMCR, mask, 0);
--
--	return qca83xx_suspend(phydev);
--}
--
- static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
- {
- 	int ret;
-@@ -2599,53 +2414,6 @@ static struct phy_driver at803x_driver[]
- 	.soft_reset		= genphy_soft_reset,
- 	.config_aneg		= at803x_config_aneg,
- }, {
--	/* QCA8337 */
--	.phy_id			= QCA8337_PHY_ID,
--	.phy_id_mask		= QCA8K_PHY_ID_MASK,
--	.name			= "Qualcomm Atheros 8337 internal PHY",
--	/* PHY_GBIT_FEATURES */
--	.probe			= at803x_probe,
--	.flags			= PHY_IS_INTERNAL,
--	.config_init		= qca83xx_config_init,
--	.soft_reset		= genphy_soft_reset,
--	.get_sset_count		= qca83xx_get_sset_count,
--	.get_strings		= qca83xx_get_strings,
--	.get_stats		= qca83xx_get_stats,
--	.suspend		= qca8337_suspend,
--	.resume			= qca83xx_resume,
--}, {
--	/* QCA8327-A from switch QCA8327-AL1A */
--	.phy_id			= QCA8327_A_PHY_ID,
--	.phy_id_mask		= QCA8K_PHY_ID_MASK,
--	.name			= "Qualcomm Atheros 8327-A internal PHY",
--	/* PHY_GBIT_FEATURES */
--	.link_change_notify	= qca83xx_link_change_notify,
--	.probe			= at803x_probe,
--	.flags			= PHY_IS_INTERNAL,
--	.config_init		= qca8327_config_init,
--	.soft_reset		= genphy_soft_reset,
--	.get_sset_count		= qca83xx_get_sset_count,
--	.get_strings		= qca83xx_get_strings,
--	.get_stats		= qca83xx_get_stats,
--	.suspend		= qca8327_suspend,
--	.resume			= qca83xx_resume,
--}, {
--	/* QCA8327-B from switch QCA8327-BL1A */
--	.phy_id			= QCA8327_B_PHY_ID,
--	.phy_id_mask		= QCA8K_PHY_ID_MASK,
--	.name			= "Qualcomm Atheros 8327-B internal PHY",
--	/* PHY_GBIT_FEATURES */
--	.link_change_notify	= qca83xx_link_change_notify,
--	.probe			= at803x_probe,
--	.flags			= PHY_IS_INTERNAL,
--	.config_init		= qca8327_config_init,
--	.soft_reset		= genphy_soft_reset,
--	.get_sset_count		= qca83xx_get_sset_count,
--	.get_strings		= qca83xx_get_strings,
--	.get_stats		= qca83xx_get_stats,
--	.suspend		= qca8327_suspend,
--	.resume			= qca83xx_resume,
--}, {
- 	/* Qualcomm QCA8081 */
- 	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
- 	.name			= "Qualcomm QCA8081",
-@@ -2683,9 +2451,6 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
- 	{ }
---- /dev/null
-+++ b/drivers/net/phy/qcom/qca83xx.c
-@@ -0,0 +1,275 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+
-+#include <linux/phy.h>
-+#include <linux/module.h>
-+
-+#include "qcom.h"
-+
-+#define AT803X_DEBUG_REG_3C			0x3C
-+
-+#define AT803X_DEBUG_REG_GREEN			0x3D
-+#define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
-+
-+#define MDIO_AZ_DEBUG				0x800D
-+
-+#define QCA8327_A_PHY_ID			0x004dd033
-+#define QCA8327_B_PHY_ID			0x004dd034
-+#define QCA8337_PHY_ID				0x004dd036
-+#define QCA8K_PHY_ID_MASK			0xffffffff
-+
-+#define QCA8K_DEVFLAGS_REVISION_MASK		GENMASK(2, 0)
-+
-+static struct at803x_hw_stat qca83xx_hw_stats[] = {
-+	{ "phy_idle_errors", 0xa, GENMASK(7, 0), PHY},
-+	{ "phy_receive_errors", 0x15, GENMASK(15, 0), PHY},
-+	{ "eee_wake_errors", 0x16, GENMASK(15, 0), MMD},
-+};
-+
-+struct qca83xx_priv {
-+	u64 stats[ARRAY_SIZE(qca83xx_hw_stats)];
-+};
-+
-+MODULE_DESCRIPTION("Qualcomm Atheros QCA83XX PHY driver");
-+MODULE_AUTHOR("Matus Ujhelyi");
-+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
-+MODULE_LICENSE("GPL");
-+
-+static int qca83xx_get_sset_count(struct phy_device *phydev)
-+{
-+	return ARRAY_SIZE(qca83xx_hw_stats);
-+}
-+
-+static void qca83xx_get_strings(struct phy_device *phydev, u8 *data)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) {
-+		strscpy(data + i * ETH_GSTRING_LEN,
-+			qca83xx_hw_stats[i].string, ETH_GSTRING_LEN);
-+	}
-+}
-+
-+static u64 qca83xx_get_stat(struct phy_device *phydev, int i)
-+{
-+	struct at803x_hw_stat stat = qca83xx_hw_stats[i];
-+	struct qca83xx_priv *priv = phydev->priv;
-+	int val;
-+	u64 ret;
-+
-+	if (stat.access_type == MMD)
-+		val = phy_read_mmd(phydev, MDIO_MMD_PCS, stat.reg);
-+	else
-+		val = phy_read(phydev, stat.reg);
-+
-+	if (val < 0) {
-+		ret = U64_MAX;
-+	} else {
-+		val = val & stat.mask;
-+		priv->stats[i] += val;
-+		ret = priv->stats[i];
-+	}
-+
-+	return ret;
-+}
-+
-+static void qca83xx_get_stats(struct phy_device *phydev,
-+			      struct ethtool_stats *stats, u64 *data)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++)
-+		data[i] = qca83xx_get_stat(phydev, i);
-+}
-+
-+static int qca83xx_probe(struct phy_device *phydev)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	struct qca83xx_priv *priv;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	phydev->priv = priv;
-+
-+	return 0;
-+}
-+
-+static int qca83xx_config_init(struct phy_device *phydev)
-+{
-+	u8 switch_revision;
-+
-+	switch_revision = phydev->dev_flags & QCA8K_DEVFLAGS_REVISION_MASK;
-+
-+	switch (switch_revision) {
-+	case 1:
-+		/* For 100M waveform */
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
-+		/* Turn on Gigabit clock */
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
-+		break;
-+
-+	case 2:
-+		phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0x0);
-+		fallthrough;
-+	case 4:
-+		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
-+		break;
-+	}
-+
-+	/* Following original QCA sourcecode set port to prefer master */
-+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
-+
-+	return 0;
-+}
-+
-+static int qca8327_config_init(struct phy_device *phydev)
-+{
-+	/* QCA8327 require DAC amplitude adjustment for 100m set to +6%.
-+	 * Disable on init and enable only with 100m speed following
-+	 * qca original source code.
-+	 */
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-+			      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-+
-+	return qca83xx_config_init(phydev);
-+}
-+
-+static void qca83xx_link_change_notify(struct phy_device *phydev)
-+{
-+	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
-+	if (phydev->state == PHY_RUNNING) {
-+		if (phydev->speed == SPEED_100)
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-+					      QCA8327_DEBUG_MANU_CTRL_EN,
-+					      QCA8327_DEBUG_MANU_CTRL_EN);
-+	} else {
-+		/* Reset DAC Amplitude adjustment */
-+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
-+				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
-+	}
-+}
-+
-+static int qca83xx_resume(struct phy_device *phydev)
-+{
-+	int ret, val;
-+
-+	/* Skip reset if not suspended */
-+	if (!phydev->suspended)
-+		return 0;
-+
-+	/* Reinit the port, reset values set by suspend */
-+	qca83xx_config_init(phydev);
-+
-+	/* Reset the port on port resume */
-+	phy_set_bits(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
-+
-+	/* On resume from suspend the switch execute a reset and
-+	 * restart auto-negotiation. Wait for reset to complete.
-+	 */
-+	ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
-+				    50000, 600000, true);
-+	if (ret)
-+		return ret;
-+
-+	usleep_range(1000, 2000);
-+
-+	return 0;
-+}
-+
-+static int qca83xx_suspend(struct phy_device *phydev)
-+{
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
-+			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
-+
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,
-+			      AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE |
-+			      AT803X_DEBUG_HIB_CTRL_SEL_RST_80U, 0);
-+
-+	return 0;
-+}
-+
-+static int qca8337_suspend(struct phy_device *phydev)
-+{
-+	/* Only QCA8337 support actual suspend. */
-+	genphy_suspend(phydev);
-+
-+	return qca83xx_suspend(phydev);
-+}
-+
-+static int qca8327_suspend(struct phy_device *phydev)
-+{
-+	u16 mask = 0;
-+
-+	/* QCA8327 cause port unreliability when phy suspend
-+	 * is set.
-+	 */
-+	mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX);
-+	phy_modify(phydev, MII_BMCR, mask, 0);
-+
-+	return qca83xx_suspend(phydev);
-+}
-+
-+static struct phy_driver qca83xx_driver[] = {
-+{
-+	/* QCA8337 */
-+	.phy_id			= QCA8337_PHY_ID,
-+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-+	.name			= "Qualcomm Atheros 8337 internal PHY",
-+	/* PHY_GBIT_FEATURES */
-+	.probe			= qca83xx_probe,
-+	.flags			= PHY_IS_INTERNAL,
-+	.config_init		= qca83xx_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.get_sset_count		= qca83xx_get_sset_count,
-+	.get_strings		= qca83xx_get_strings,
-+	.get_stats		= qca83xx_get_stats,
-+	.suspend		= qca8337_suspend,
-+	.resume			= qca83xx_resume,
-+}, {
-+	/* QCA8327-A from switch QCA8327-AL1A */
-+	.phy_id			= QCA8327_A_PHY_ID,
-+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-+	.name			= "Qualcomm Atheros 8327-A internal PHY",
-+	/* PHY_GBIT_FEATURES */
-+	.link_change_notify	= qca83xx_link_change_notify,
-+	.probe			= qca83xx_probe,
-+	.flags			= PHY_IS_INTERNAL,
-+	.config_init		= qca8327_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.get_sset_count		= qca83xx_get_sset_count,
-+	.get_strings		= qca83xx_get_strings,
-+	.get_stats		= qca83xx_get_stats,
-+	.suspend		= qca8327_suspend,
-+	.resume			= qca83xx_resume,
-+}, {
-+	/* QCA8327-B from switch QCA8327-BL1A */
-+	.phy_id			= QCA8327_B_PHY_ID,
-+	.phy_id_mask		= QCA8K_PHY_ID_MASK,
-+	.name			= "Qualcomm Atheros 8327-B internal PHY",
-+	/* PHY_GBIT_FEATURES */
-+	.link_change_notify	= qca83xx_link_change_notify,
-+	.probe			= qca83xx_probe,
-+	.flags			= PHY_IS_INTERNAL,
-+	.config_init		= qca8327_config_init,
-+	.soft_reset		= genphy_soft_reset,
-+	.get_sset_count		= qca83xx_get_sset_count,
-+	.get_strings		= qca83xx_get_strings,
-+	.get_stats		= qca83xx_get_stats,
-+	.suspend		= qca8327_suspend,
-+	.resume			= qca83xx_resume,
-+}, };
-+
-+module_phy_driver(qca83xx_driver);
-+
-+static struct mdio_device_id __maybe_unused qca83xx_tbl[] = {
-+	{ PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
-+	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(mdio, qca83xx_tbl);
diff --git a/target/linux/generic/backport-6.1/713-v6.9-04-net-phy-qcom-move-additional-functions-to-shared-lib.patch b/target/linux/generic/backport-6.1/713-v6.9-04-net-phy-qcom-move-additional-functions-to-shared-lib.patch
deleted file mode 100644
index 9c43ad13b443..000000000000
--- a/target/linux/generic/backport-6.1/713-v6.9-04-net-phy-qcom-move-additional-functions-to-shared-lib.patch
+++ /dev/null
@@ -1,1014 +0,0 @@
-From 249d2b80e4db0e38503ed0ec2af6c7401bc099b9 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 Jan 2024 15:15:22 +0100
-Subject: [PATCH 4/5] net: phy: qcom: move additional functions to shared
- library
-
-Move additional functions to shared library in preparation for qca808x
-PHY Family to be detached from at803x driver.
-
-Only the shared defines are moved to the shared qcom.h header.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240129141600.2592-5-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/qcom/at803x.c       | 426 +---------------------------
- drivers/net/phy/qcom/qcom-phy-lib.c | 376 ++++++++++++++++++++++++
- drivers/net/phy/qcom/qcom.h         |  86 ++++++
- 3 files changed, 463 insertions(+), 425 deletions(-)
-
---- a/drivers/net/phy/qcom/at803x.c
-+++ b/drivers/net/phy/qcom/at803x.c
-@@ -24,65 +24,11 @@
- 
- #include "qcom.h"
- 
--#define AT803X_SPECIFIC_FUNCTION_CONTROL	0x10
--#define AT803X_SFC_ASSERT_CRS			BIT(11)
--#define AT803X_SFC_FORCE_LINK			BIT(10)
--#define AT803X_SFC_MDI_CROSSOVER_MODE_M		GENMASK(6, 5)
--#define AT803X_SFC_AUTOMATIC_CROSSOVER		0x3
--#define AT803X_SFC_MANUAL_MDIX			0x1
--#define AT803X_SFC_MANUAL_MDI			0x0
--#define AT803X_SFC_SQE_TEST			BIT(2)
--#define AT803X_SFC_POLARITY_REVERSAL		BIT(1)
--#define AT803X_SFC_DISABLE_JABBER		BIT(0)
--
--#define AT803X_SPECIFIC_STATUS			0x11
--#define AT803X_SS_SPEED_MASK			GENMASK(15, 14)
--#define AT803X_SS_SPEED_1000			2
--#define AT803X_SS_SPEED_100			1
--#define AT803X_SS_SPEED_10			0
--#define AT803X_SS_DUPLEX			BIT(13)
--#define AT803X_SS_SPEED_DUPLEX_RESOLVED		BIT(11)
--#define AT803X_SS_MDIX				BIT(6)
--
--#define QCA808X_SS_SPEED_MASK			GENMASK(9, 7)
--#define QCA808X_SS_SPEED_2500			4
--
--#define AT803X_INTR_ENABLE			0x12
--#define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
--#define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
--#define AT803X_INTR_ENABLE_DUPLEX_CHANGED	BIT(13)
--#define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
--#define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
--#define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
--#define AT803X_INTR_ENABLE_LINK_FAIL_BX		BIT(8)
--#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX	BIT(7)
--#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
--#define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
--#define AT803X_INTR_ENABLE_WOL			BIT(0)
--
--#define AT803X_INTR_STATUS			0x13
--
--#define AT803X_SMART_SPEED			0x14
--#define AT803X_SMART_SPEED_ENABLE		BIT(5)
--#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK	GENMASK(4, 2)
--#define AT803X_SMART_SPEED_BYPASS_TIMER		BIT(1)
--#define AT803X_CDT				0x16
--#define AT803X_CDT_MDI_PAIR_MASK		GENMASK(9, 8)
--#define AT803X_CDT_ENABLE_TEST			BIT(0)
--#define AT803X_CDT_STATUS			0x1c
--#define AT803X_CDT_STATUS_STAT_NORMAL		0
--#define AT803X_CDT_STATUS_STAT_SHORT		1
--#define AT803X_CDT_STATUS_STAT_OPEN		2
--#define AT803X_CDT_STATUS_STAT_FAIL		3
--#define AT803X_CDT_STATUS_STAT_MASK		GENMASK(9, 8)
--#define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
- #define AT803X_LED_CONTROL			0x18
- 
- #define AT803X_PHY_MMD3_WOL_CTRL		0x8012
- #define AT803X_WOL_EN				BIT(5)
--#define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
--#define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
--#define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
-+
- #define AT803X_REG_CHIP_CONFIG			0x1f
- #define AT803X_BT_BX_REG_SEL			0x8000
- 
-@@ -138,10 +84,6 @@
- #define AT803X_CLK_OUT_STRENGTH_HALF		1
- #define AT803X_CLK_OUT_STRENGTH_QUARTER		2
- 
--#define AT803X_DEFAULT_DOWNSHIFT		5
--#define AT803X_MIN_DOWNSHIFT			2
--#define AT803X_MAX_DOWNSHIFT			9
--
- #define AT803X_MMD3_SMARTEEE_CTL1		0x805b
- #define AT803X_MMD3_SMARTEEE_CTL2		0x805c
- #define AT803X_MMD3_SMARTEEE_CTL3		0x805d
-@@ -366,11 +308,6 @@ MODULE_DESCRIPTION("Qualcomm Atheros AR8
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
- 
--struct at803x_ss_mask {
--	u16 speed_mask;
--	u8 speed_shift;
--};
--
- struct at803x_priv {
- 	int flags;
- 	u16 clk_25m_reg;
-@@ -470,80 +407,6 @@ static void at803x_context_restore(struc
- 	phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
- }
- 
--static int at803x_set_wol(struct phy_device *phydev,
--			  struct ethtool_wolinfo *wol)
--{
--	int ret, irq_enabled;
--
--	if (wol->wolopts & WAKE_MAGIC) {
--		struct net_device *ndev = phydev->attached_dev;
--		const u8 *mac;
--		unsigned int i;
--		static const unsigned int offsets[] = {
--			AT803X_LOC_MAC_ADDR_32_47_OFFSET,
--			AT803X_LOC_MAC_ADDR_16_31_OFFSET,
--			AT803X_LOC_MAC_ADDR_0_15_OFFSET,
--		};
--
--		if (!ndev)
--			return -ENODEV;
--
--		mac = (const u8 *)ndev->dev_addr;
--
--		if (!is_valid_ether_addr(mac))
--			return -EINVAL;
--
--		for (i = 0; i < 3; i++)
--			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
--				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
--
--		/* Enable WOL interrupt */
--		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
--		if (ret)
--			return ret;
--	} else {
--		/* Disable WOL interrupt */
--		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
--		if (ret)
--			return ret;
--	}
--
--	/* Clear WOL status */
--	ret = phy_read(phydev, AT803X_INTR_STATUS);
--	if (ret < 0)
--		return ret;
--
--	/* Check if there are other interrupts except for WOL triggered when PHY is
--	 * in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can
--	 * be passed up to the interrupt PIN.
--	 */
--	irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
--	if (irq_enabled < 0)
--		return irq_enabled;
--
--	irq_enabled &= ~AT803X_INTR_ENABLE_WOL;
--	if (ret & irq_enabled && !phy_polling_mode(phydev))
--		phy_trigger_machine(phydev);
--
--	return 0;
--}
--
--static void at803x_get_wol(struct phy_device *phydev,
--			   struct ethtool_wolinfo *wol)
--{
--	int value;
--
--	wol->supported = WAKE_MAGIC;
--	wol->wolopts = 0;
--
--	value = phy_read(phydev, AT803X_INTR_ENABLE);
--	if (value < 0)
--		return;
--
--	if (value & AT803X_INTR_ENABLE_WOL)
--		wol->wolopts |= WAKE_MAGIC;
--}
--
- static int at803x_suspend(struct phy_device *phydev)
- {
- 	int value;
-@@ -816,73 +679,6 @@ static int at803x_config_init(struct phy
- 	return phy_modify(phydev, MII_ADVERTISE, MDIO_AN_CTRL1_XNP, 0);
- }
- 
--static int at803x_ack_interrupt(struct phy_device *phydev)
--{
--	int err;
--
--	err = phy_read(phydev, AT803X_INTR_STATUS);
--
--	return (err < 0) ? err : 0;
--}
--
--static int at803x_config_intr(struct phy_device *phydev)
--{
--	int err;
--	int value;
--
--	value = phy_read(phydev, AT803X_INTR_ENABLE);
--
--	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
--		/* Clear any pending interrupts */
--		err = at803x_ack_interrupt(phydev);
--		if (err)
--			return err;
--
--		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
--		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
--		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
--		value |= AT803X_INTR_ENABLE_LINK_FAIL;
--		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
--
--		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
--	} else {
--		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
--		if (err)
--			return err;
--
--		/* Clear any pending interrupts */
--		err = at803x_ack_interrupt(phydev);
--	}
--
--	return err;
--}
--
--static irqreturn_t at803x_handle_interrupt(struct phy_device *phydev)
--{
--	int irq_status, int_enabled;
--
--	irq_status = phy_read(phydev, AT803X_INTR_STATUS);
--	if (irq_status < 0) {
--		phy_error(phydev);
--		return IRQ_NONE;
--	}
--
--	/* Read the current enabled interrupts */
--	int_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
--	if (int_enabled < 0) {
--		phy_error(phydev);
--		return IRQ_NONE;
--	}
--
--	/* See if this was one of our enabled interrupts */
--	if (!(irq_status & int_enabled))
--		return IRQ_NONE;
--
--	phy_trigger_machine(phydev);
--
--	return IRQ_HANDLED;
--}
--
- static void at803x_link_change_notify(struct phy_device *phydev)
- {
- 	/*
-@@ -908,69 +704,6 @@ static void at803x_link_change_notify(st
- 	}
- }
- 
--static int at803x_read_specific_status(struct phy_device *phydev,
--				       struct at803x_ss_mask ss_mask)
--{
--	int ss;
--
--	/* Read the AT8035 PHY-Specific Status register, which indicates the
--	 * speed and duplex that the PHY is actually using, irrespective of
--	 * whether we are in autoneg mode or not.
--	 */
--	ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
--	if (ss < 0)
--		return ss;
--
--	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
--		int sfc, speed;
--
--		sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL);
--		if (sfc < 0)
--			return sfc;
--
--		speed = ss & ss_mask.speed_mask;
--		speed >>= ss_mask.speed_shift;
--
--		switch (speed) {
--		case AT803X_SS_SPEED_10:
--			phydev->speed = SPEED_10;
--			break;
--		case AT803X_SS_SPEED_100:
--			phydev->speed = SPEED_100;
--			break;
--		case AT803X_SS_SPEED_1000:
--			phydev->speed = SPEED_1000;
--			break;
--		case QCA808X_SS_SPEED_2500:
--			phydev->speed = SPEED_2500;
--			break;
--		}
--		if (ss & AT803X_SS_DUPLEX)
--			phydev->duplex = DUPLEX_FULL;
--		else
--			phydev->duplex = DUPLEX_HALF;
--
--		if (ss & AT803X_SS_MDIX)
--			phydev->mdix = ETH_TP_MDI_X;
--		else
--			phydev->mdix = ETH_TP_MDI;
--
--		switch (FIELD_GET(AT803X_SFC_MDI_CROSSOVER_MODE_M, sfc)) {
--		case AT803X_SFC_MANUAL_MDI:
--			phydev->mdix_ctrl = ETH_TP_MDI;
--			break;
--		case AT803X_SFC_MANUAL_MDIX:
--			phydev->mdix_ctrl = ETH_TP_MDI_X;
--			break;
--		case AT803X_SFC_AUTOMATIC_CROSSOVER:
--			phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
--			break;
--		}
--	}
--
--	return 0;
--}
--
- static int at803x_read_status(struct phy_device *phydev)
- {
- 	struct at803x_ss_mask ss_mask = { 0 };
-@@ -1006,50 +739,6 @@ static int at803x_read_status(struct phy
- 	return 0;
- }
- 
--static int at803x_config_mdix(struct phy_device *phydev, u8 ctrl)
--{
--	u16 val;
--
--	switch (ctrl) {
--	case ETH_TP_MDI:
--		val = AT803X_SFC_MANUAL_MDI;
--		break;
--	case ETH_TP_MDI_X:
--		val = AT803X_SFC_MANUAL_MDIX;
--		break;
--	case ETH_TP_MDI_AUTO:
--		val = AT803X_SFC_AUTOMATIC_CROSSOVER;
--		break;
--	default:
--		return 0;
--	}
--
--	return phy_modify_changed(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL,
--			  AT803X_SFC_MDI_CROSSOVER_MODE_M,
--			  FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val));
--}
--
--static int at803x_prepare_config_aneg(struct phy_device *phydev)
--{
--	int ret;
--
--	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
--	if (ret < 0)
--		return ret;
--
--	/* Changes of the midx bits are disruptive to the normal operation;
--	 * therefore any changes to these registers must be followed by a
--	 * software reset to take effect.
--	 */
--	if (ret == 1) {
--		ret = genphy_soft_reset(phydev);
--		if (ret < 0)
--			return ret;
--	}
--
--	return 0;
--}
--
- static int at803x_config_aneg(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
-@@ -1065,80 +754,6 @@ static int at803x_config_aneg(struct phy
- 	return genphy_config_aneg(phydev);
- }
- 
--static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
--{
--	int val;
--
--	val = phy_read(phydev, AT803X_SMART_SPEED);
--	if (val < 0)
--		return val;
--
--	if (val & AT803X_SMART_SPEED_ENABLE)
--		*d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2;
--	else
--		*d = DOWNSHIFT_DEV_DISABLE;
--
--	return 0;
--}
--
--static int at803x_set_downshift(struct phy_device *phydev, u8 cnt)
--{
--	u16 mask, set;
--	int ret;
--
--	switch (cnt) {
--	case DOWNSHIFT_DEV_DEFAULT_COUNT:
--		cnt = AT803X_DEFAULT_DOWNSHIFT;
--		fallthrough;
--	case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT:
--		set = AT803X_SMART_SPEED_ENABLE |
--		      AT803X_SMART_SPEED_BYPASS_TIMER |
--		      FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2);
--		mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK;
--		break;
--	case DOWNSHIFT_DEV_DISABLE:
--		set = 0;
--		mask = AT803X_SMART_SPEED_ENABLE |
--		       AT803X_SMART_SPEED_BYPASS_TIMER;
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set);
--
--	/* After changing the smart speed settings, we need to perform a
--	 * software reset, use phy_init_hw() to make sure we set the
--	 * reapply any values which might got lost during software reset.
--	 */
--	if (ret == 1)
--		ret = phy_init_hw(phydev);
--
--	return ret;
--}
--
--static int at803x_get_tunable(struct phy_device *phydev,
--			      struct ethtool_tunable *tuna, void *data)
--{
--	switch (tuna->id) {
--	case ETHTOOL_PHY_DOWNSHIFT:
--		return at803x_get_downshift(phydev, data);
--	default:
--		return -EOPNOTSUPP;
--	}
--}
--
--static int at803x_set_tunable(struct phy_device *phydev,
--			      struct ethtool_tunable *tuna, const void *data)
--{
--	switch (tuna->id) {
--	case ETHTOOL_PHY_DOWNSHIFT:
--		return at803x_set_downshift(phydev, *(const u8 *)data);
--	default:
--		return -EOPNOTSUPP;
--	}
--}
--
- static int at803x_cable_test_result_trans(u16 status)
- {
- 	switch (FIELD_GET(AT803X_CDT_STATUS_STAT_MASK, status)) {
-@@ -1170,45 +785,6 @@ static bool at803x_cdt_fault_length_vali
- 	return false;
- }
- 
--static int at803x_cdt_fault_length(int dt)
--{
--	/* According to the datasheet the distance to the fault is
--	 * DELTA_TIME * 0.824 meters.
--	 *
--	 * The author suspect the correct formula is:
--	 *
--	 *   fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2
--	 *
--	 * where c is the speed of light, VF is the velocity factor of
--	 * the twisted pair cable, 125MHz the counter frequency and
--	 * we need to divide by 2 because the hardware will measure the
--	 * round trip time to the fault and back to the PHY.
--	 *
--	 * With a VF of 0.69 we get the factor 0.824 mentioned in the
--	 * datasheet.
--	 */
--	return (dt * 824) / 10;
--}
--
--static int at803x_cdt_start(struct phy_device *phydev,
--			    u32 cdt_start)
--{
--	return phy_write(phydev, AT803X_CDT, cdt_start);
--}
--
--static int at803x_cdt_wait_for_completion(struct phy_device *phydev,
--					  u32 cdt_en)
--{
--	int val, ret;
--
--	/* One test run takes about 25ms */
--	ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
--				    !(val & cdt_en),
--				    30000, 100000, true);
--
--	return ret < 0 ? ret : 0;
--}
--
- static int at803x_cable_test_one_pair(struct phy_device *phydev, int pair)
- {
- 	static const int ethtool_pair[] = {
---- a/drivers/net/phy/qcom/qcom-phy-lib.c
-+++ b/drivers/net/phy/qcom/qcom-phy-lib.c
-@@ -3,6 +3,9 @@
- #include <linux/phy.h>
- #include <linux/module.h>
- 
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+
- #include "qcom.h"
- 
- MODULE_DESCRIPTION("Qualcomm PHY driver Common Functions");
-@@ -51,3 +54,376 @@ int at803x_debug_reg_write(struct phy_de
- 	return phy_write(phydev, AT803X_DEBUG_DATA, data);
- }
- EXPORT_SYMBOL_GPL(at803x_debug_reg_write);
-+
-+int at803x_set_wol(struct phy_device *phydev,
-+		   struct ethtool_wolinfo *wol)
-+{
-+	int ret, irq_enabled;
-+
-+	if (wol->wolopts & WAKE_MAGIC) {
-+		struct net_device *ndev = phydev->attached_dev;
-+		const u8 *mac;
-+		unsigned int i;
-+		static const unsigned int offsets[] = {
-+			AT803X_LOC_MAC_ADDR_32_47_OFFSET,
-+			AT803X_LOC_MAC_ADDR_16_31_OFFSET,
-+			AT803X_LOC_MAC_ADDR_0_15_OFFSET,
-+		};
-+
-+		if (!ndev)
-+			return -ENODEV;
-+
-+		mac = (const u8 *)ndev->dev_addr;
-+
-+		if (!is_valid_ether_addr(mac))
-+			return -EINVAL;
-+
-+		for (i = 0; i < 3; i++)
-+			phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
-+				      mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
-+
-+		/* Enable WOL interrupt */
-+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
-+		if (ret)
-+			return ret;
-+	} else {
-+		/* Disable WOL interrupt */
-+		ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	/* Clear WOL status */
-+	ret = phy_read(phydev, AT803X_INTR_STATUS);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Check if there are other interrupts except for WOL triggered when PHY is
-+	 * in interrupt mode, only the interrupts enabled by AT803X_INTR_ENABLE can
-+	 * be passed up to the interrupt PIN.
-+	 */
-+	irq_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
-+	if (irq_enabled < 0)
-+		return irq_enabled;
-+
-+	irq_enabled &= ~AT803X_INTR_ENABLE_WOL;
-+	if (ret & irq_enabled && !phy_polling_mode(phydev))
-+		phy_trigger_machine(phydev);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(at803x_set_wol);
-+
-+void at803x_get_wol(struct phy_device *phydev,
-+		    struct ethtool_wolinfo *wol)
-+{
-+	int value;
-+
-+	wol->supported = WAKE_MAGIC;
-+	wol->wolopts = 0;
-+
-+	value = phy_read(phydev, AT803X_INTR_ENABLE);
-+	if (value < 0)
-+		return;
-+
-+	if (value & AT803X_INTR_ENABLE_WOL)
-+		wol->wolopts |= WAKE_MAGIC;
-+}
-+EXPORT_SYMBOL_GPL(at803x_get_wol);
-+
-+int at803x_ack_interrupt(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	err = phy_read(phydev, AT803X_INTR_STATUS);
-+
-+	return (err < 0) ? err : 0;
-+}
-+EXPORT_SYMBOL_GPL(at803x_ack_interrupt);
-+
-+int at803x_config_intr(struct phy_device *phydev)
-+{
-+	int err;
-+	int value;
-+
-+	value = phy_read(phydev, AT803X_INTR_ENABLE);
-+
-+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
-+		/* Clear any pending interrupts */
-+		err = at803x_ack_interrupt(phydev);
-+		if (err)
-+			return err;
-+
-+		value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
-+		value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
-+		value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
-+		value |= AT803X_INTR_ENABLE_LINK_FAIL;
-+		value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
-+
-+		err = phy_write(phydev, AT803X_INTR_ENABLE, value);
-+	} else {
-+		err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
-+		if (err)
-+			return err;
-+
-+		/* Clear any pending interrupts */
-+		err = at803x_ack_interrupt(phydev);
-+	}
-+
-+	return err;
-+}
-+EXPORT_SYMBOL_GPL(at803x_config_intr);
-+
-+irqreturn_t at803x_handle_interrupt(struct phy_device *phydev)
-+{
-+	int irq_status, int_enabled;
-+
-+	irq_status = phy_read(phydev, AT803X_INTR_STATUS);
-+	if (irq_status < 0) {
-+		phy_error(phydev);
-+		return IRQ_NONE;
-+	}
-+
-+	/* Read the current enabled interrupts */
-+	int_enabled = phy_read(phydev, AT803X_INTR_ENABLE);
-+	if (int_enabled < 0) {
-+		phy_error(phydev);
-+		return IRQ_NONE;
-+	}
-+
-+	/* See if this was one of our enabled interrupts */
-+	if (!(irq_status & int_enabled))
-+		return IRQ_NONE;
-+
-+	phy_trigger_machine(phydev);
-+
-+	return IRQ_HANDLED;
-+}
-+EXPORT_SYMBOL_GPL(at803x_handle_interrupt);
-+
-+int at803x_read_specific_status(struct phy_device *phydev,
-+				struct at803x_ss_mask ss_mask)
-+{
-+	int ss;
-+
-+	/* Read the AT8035 PHY-Specific Status register, which indicates the
-+	 * speed and duplex that the PHY is actually using, irrespective of
-+	 * whether we are in autoneg mode or not.
-+	 */
-+	ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
-+	if (ss < 0)
-+		return ss;
-+
-+	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
-+		int sfc, speed;
-+
-+		sfc = phy_read(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL);
-+		if (sfc < 0)
-+			return sfc;
-+
-+		speed = ss & ss_mask.speed_mask;
-+		speed >>= ss_mask.speed_shift;
-+
-+		switch (speed) {
-+		case AT803X_SS_SPEED_10:
-+			phydev->speed = SPEED_10;
-+			break;
-+		case AT803X_SS_SPEED_100:
-+			phydev->speed = SPEED_100;
-+			break;
-+		case AT803X_SS_SPEED_1000:
-+			phydev->speed = SPEED_1000;
-+			break;
-+		case QCA808X_SS_SPEED_2500:
-+			phydev->speed = SPEED_2500;
-+			break;
-+		}
-+		if (ss & AT803X_SS_DUPLEX)
-+			phydev->duplex = DUPLEX_FULL;
-+		else
-+			phydev->duplex = DUPLEX_HALF;
-+
-+		if (ss & AT803X_SS_MDIX)
-+			phydev->mdix = ETH_TP_MDI_X;
-+		else
-+			phydev->mdix = ETH_TP_MDI;
-+
-+		switch (FIELD_GET(AT803X_SFC_MDI_CROSSOVER_MODE_M, sfc)) {
-+		case AT803X_SFC_MANUAL_MDI:
-+			phydev->mdix_ctrl = ETH_TP_MDI;
-+			break;
-+		case AT803X_SFC_MANUAL_MDIX:
-+			phydev->mdix_ctrl = ETH_TP_MDI_X;
-+			break;
-+		case AT803X_SFC_AUTOMATIC_CROSSOVER:
-+			phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
-+			break;
-+		}
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(at803x_read_specific_status);
-+
-+int at803x_config_mdix(struct phy_device *phydev, u8 ctrl)
-+{
-+	u16 val;
-+
-+	switch (ctrl) {
-+	case ETH_TP_MDI:
-+		val = AT803X_SFC_MANUAL_MDI;
-+		break;
-+	case ETH_TP_MDI_X:
-+		val = AT803X_SFC_MANUAL_MDIX;
-+		break;
-+	case ETH_TP_MDI_AUTO:
-+		val = AT803X_SFC_AUTOMATIC_CROSSOVER;
-+		break;
-+	default:
-+		return 0;
-+	}
-+
-+	return phy_modify_changed(phydev, AT803X_SPECIFIC_FUNCTION_CONTROL,
-+			  AT803X_SFC_MDI_CROSSOVER_MODE_M,
-+			  FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val));
-+}
-+EXPORT_SYMBOL_GPL(at803x_config_mdix);
-+
-+int at803x_prepare_config_aneg(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = at803x_config_mdix(phydev, phydev->mdix_ctrl);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Changes of the midx bits are disruptive to the normal operation;
-+	 * therefore any changes to these registers must be followed by a
-+	 * software reset to take effect.
-+	 */
-+	if (ret == 1) {
-+		ret = genphy_soft_reset(phydev);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(at803x_prepare_config_aneg);
-+
-+static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
-+{
-+	int val;
-+
-+	val = phy_read(phydev, AT803X_SMART_SPEED);
-+	if (val < 0)
-+		return val;
-+
-+	if (val & AT803X_SMART_SPEED_ENABLE)
-+		*d = FIELD_GET(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, val) + 2;
-+	else
-+		*d = DOWNSHIFT_DEV_DISABLE;
-+
-+	return 0;
-+}
-+
-+static int at803x_set_downshift(struct phy_device *phydev, u8 cnt)
-+{
-+	u16 mask, set;
-+	int ret;
-+
-+	switch (cnt) {
-+	case DOWNSHIFT_DEV_DEFAULT_COUNT:
-+		cnt = AT803X_DEFAULT_DOWNSHIFT;
-+		fallthrough;
-+	case AT803X_MIN_DOWNSHIFT ... AT803X_MAX_DOWNSHIFT:
-+		set = AT803X_SMART_SPEED_ENABLE |
-+		      AT803X_SMART_SPEED_BYPASS_TIMER |
-+		      FIELD_PREP(AT803X_SMART_SPEED_RETRY_LIMIT_MASK, cnt - 2);
-+		mask = AT803X_SMART_SPEED_RETRY_LIMIT_MASK;
-+		break;
-+	case DOWNSHIFT_DEV_DISABLE:
-+		set = 0;
-+		mask = AT803X_SMART_SPEED_ENABLE |
-+		       AT803X_SMART_SPEED_BYPASS_TIMER;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	ret = phy_modify_changed(phydev, AT803X_SMART_SPEED, mask, set);
-+
-+	/* After changing the smart speed settings, we need to perform a
-+	 * software reset, use phy_init_hw() to make sure we set the
-+	 * reapply any values which might got lost during software reset.
-+	 */
-+	if (ret == 1)
-+		ret = phy_init_hw(phydev);
-+
-+	return ret;
-+}
-+
-+int at803x_get_tunable(struct phy_device *phydev,
-+		       struct ethtool_tunable *tuna, void *data)
-+{
-+	switch (tuna->id) {
-+	case ETHTOOL_PHY_DOWNSHIFT:
-+		return at803x_get_downshift(phydev, data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+EXPORT_SYMBOL_GPL(at803x_get_tunable);
-+
-+int at803x_set_tunable(struct phy_device *phydev,
-+		       struct ethtool_tunable *tuna, const void *data)
-+{
-+	switch (tuna->id) {
-+	case ETHTOOL_PHY_DOWNSHIFT:
-+		return at803x_set_downshift(phydev, *(const u8 *)data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+EXPORT_SYMBOL_GPL(at803x_set_tunable);
-+
-+int at803x_cdt_fault_length(int dt)
-+{
-+	/* According to the datasheet the distance to the fault is
-+	 * DELTA_TIME * 0.824 meters.
-+	 *
-+	 * The author suspect the correct formula is:
-+	 *
-+	 *   fault_distance = DELTA_TIME * (c * VF) / 125MHz / 2
-+	 *
-+	 * where c is the speed of light, VF is the velocity factor of
-+	 * the twisted pair cable, 125MHz the counter frequency and
-+	 * we need to divide by 2 because the hardware will measure the
-+	 * round trip time to the fault and back to the PHY.
-+	 *
-+	 * With a VF of 0.69 we get the factor 0.824 mentioned in the
-+	 * datasheet.
-+	 */
-+	return (dt * 824) / 10;
-+}
-+EXPORT_SYMBOL_GPL(at803x_cdt_fault_length);
-+
-+int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start)
-+{
-+	return phy_write(phydev, AT803X_CDT, cdt_start);
-+}
-+EXPORT_SYMBOL_GPL(at803x_cdt_start);
-+
-+int at803x_cdt_wait_for_completion(struct phy_device *phydev,
-+				   u32 cdt_en)
-+{
-+	int val, ret;
-+
-+	/* One test run takes about 25ms */
-+	ret = phy_read_poll_timeout(phydev, AT803X_CDT, val,
-+				    !(val & cdt_en),
-+				    30000, 100000, true);
-+
-+	return ret < 0 ? ret : 0;
-+}
-+EXPORT_SYMBOL_GPL(at803x_cdt_wait_for_completion);
---- a/drivers/net/phy/qcom/qcom.h
-+++ b/drivers/net/phy/qcom/qcom.h
-@@ -1,5 +1,63 @@
- /* SPDX-License-Identifier: GPL-2.0 */
- 
-+#define AT803X_SPECIFIC_FUNCTION_CONTROL	0x10
-+#define AT803X_SFC_ASSERT_CRS			BIT(11)
-+#define AT803X_SFC_FORCE_LINK			BIT(10)
-+#define AT803X_SFC_MDI_CROSSOVER_MODE_M		GENMASK(6, 5)
-+#define AT803X_SFC_AUTOMATIC_CROSSOVER		0x3
-+#define AT803X_SFC_MANUAL_MDIX			0x1
-+#define AT803X_SFC_MANUAL_MDI			0x0
-+#define AT803X_SFC_SQE_TEST			BIT(2)
-+#define AT803X_SFC_POLARITY_REVERSAL		BIT(1)
-+#define AT803X_SFC_DISABLE_JABBER		BIT(0)
-+
-+#define AT803X_SPECIFIC_STATUS			0x11
-+#define AT803X_SS_SPEED_MASK			GENMASK(15, 14)
-+#define AT803X_SS_SPEED_1000			2
-+#define AT803X_SS_SPEED_100			1
-+#define AT803X_SS_SPEED_10			0
-+#define AT803X_SS_DUPLEX			BIT(13)
-+#define AT803X_SS_SPEED_DUPLEX_RESOLVED		BIT(11)
-+#define AT803X_SS_MDIX				BIT(6)
-+
-+#define QCA808X_SS_SPEED_MASK			GENMASK(9, 7)
-+#define QCA808X_SS_SPEED_2500			4
-+
-+#define AT803X_INTR_ENABLE			0x12
-+#define AT803X_INTR_ENABLE_AUTONEG_ERR		BIT(15)
-+#define AT803X_INTR_ENABLE_SPEED_CHANGED	BIT(14)
-+#define AT803X_INTR_ENABLE_DUPLEX_CHANGED	BIT(13)
-+#define AT803X_INTR_ENABLE_PAGE_RECEIVED	BIT(12)
-+#define AT803X_INTR_ENABLE_LINK_FAIL		BIT(11)
-+#define AT803X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
-+#define AT803X_INTR_ENABLE_LINK_FAIL_BX		BIT(8)
-+#define AT803X_INTR_ENABLE_LINK_SUCCESS_BX	BIT(7)
-+#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE	BIT(5)
-+#define AT803X_INTR_ENABLE_POLARITY_CHANGED	BIT(1)
-+#define AT803X_INTR_ENABLE_WOL			BIT(0)
-+
-+#define AT803X_INTR_STATUS			0x13
-+
-+#define AT803X_SMART_SPEED			0x14
-+#define AT803X_SMART_SPEED_ENABLE		BIT(5)
-+#define AT803X_SMART_SPEED_RETRY_LIMIT_MASK	GENMASK(4, 2)
-+#define AT803X_SMART_SPEED_BYPASS_TIMER		BIT(1)
-+
-+#define AT803X_CDT				0x16
-+#define AT803X_CDT_MDI_PAIR_MASK		GENMASK(9, 8)
-+#define AT803X_CDT_ENABLE_TEST			BIT(0)
-+#define AT803X_CDT_STATUS			0x1c
-+#define AT803X_CDT_STATUS_STAT_NORMAL		0
-+#define AT803X_CDT_STATUS_STAT_SHORT		1
-+#define AT803X_CDT_STATUS_STAT_OPEN		2
-+#define AT803X_CDT_STATUS_STAT_FAIL		3
-+#define AT803X_CDT_STATUS_STAT_MASK		GENMASK(9, 8)
-+#define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
-+
-+#define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
-+#define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
-+#define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
-+
- #define AT803X_DEBUG_ADDR			0x1D
- #define AT803X_DEBUG_DATA			0x1E
- 
-@@ -16,6 +74,10 @@
- #define   AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE	BIT(13)
- #define   AT803X_DEBUG_HIB_CTRL_PS_HIB_EN	BIT(15)
- 
-+#define AT803X_DEFAULT_DOWNSHIFT		5
-+#define AT803X_MIN_DOWNSHIFT			2
-+#define AT803X_MAX_DOWNSHIFT			9
-+
- enum stat_access_type {
- 	PHY,
- 	MMD
-@@ -28,7 +90,31 @@ struct at803x_hw_stat {
- 	enum stat_access_type access_type;
- };
- 
-+struct at803x_ss_mask {
-+	u16 speed_mask;
-+	u8 speed_shift;
-+};
-+
- int at803x_debug_reg_read(struct phy_device *phydev, u16 reg);
- int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg,
- 			  u16 clear, u16 set);
- int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data);
-+int at803x_set_wol(struct phy_device *phydev,
-+		   struct ethtool_wolinfo *wol);
-+void at803x_get_wol(struct phy_device *phydev,
-+		    struct ethtool_wolinfo *wol);
-+int at803x_ack_interrupt(struct phy_device *phydev);
-+int at803x_config_intr(struct phy_device *phydev);
-+irqreturn_t at803x_handle_interrupt(struct phy_device *phydev);
-+int at803x_read_specific_status(struct phy_device *phydev,
-+				struct at803x_ss_mask ss_mask);
-+int at803x_config_mdix(struct phy_device *phydev, u8 ctrl);
-+int at803x_prepare_config_aneg(struct phy_device *phydev);
-+int at803x_get_tunable(struct phy_device *phydev,
-+		       struct ethtool_tunable *tuna, void *data);
-+int at803x_set_tunable(struct phy_device *phydev,
-+		       struct ethtool_tunable *tuna, const void *data);
-+int at803x_cdt_fault_length(int dt);
-+int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start);
-+int at803x_cdt_wait_for_completion(struct phy_device *phydev,
-+				   u32 cdt_en);
diff --git a/target/linux/generic/backport-6.1/713-v6.9-05-net-phy-qcom-detach-qca808x-PHY-driver-from-at803x.patch b/target/linux/generic/backport-6.1/713-v6.9-05-net-phy-qcom-detach-qca808x-PHY-driver-from-at803x.patch
deleted file mode 100644
index 597dcea4c069..000000000000
--- a/target/linux/generic/backport-6.1/713-v6.9-05-net-phy-qcom-detach-qca808x-PHY-driver-from-at803x.patch
+++ /dev/null
@@ -1,1936 +0,0 @@
-From c89414adf2ec7cd9e7080c419aa5847f1db1009c Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 Jan 2024 15:15:23 +0100
-Subject: [PATCH 5/5] net: phy: qcom: detach qca808x PHY driver from at803x
-
-Almost all the QCA8081 PHY driver OPs are specific and only some of them
-use the generic at803x.
-
-To make the at803x code slimmer, move all the specific qca808x regs and
-functions to a dedicated PHY driver.
-
-Probe function and priv struct is reworked to allocate and use only the
-qca808x specific data. Unused data from at803x PHY driver are dropped
-from at803x priv struct.
-
-Also a new Kconfig is introduced QCA808X_PHY, to compile the newly
-introduced PHY driver for QCA8081 PHY.
-
-As the Kconfig name starts with Qualcomm the same order is kept.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240129141600.2592-6-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/qcom/Kconfig   |   6 +
- drivers/net/phy/qcom/Makefile  |   1 +
- drivers/net/phy/qcom/at803x.c  | 897 +------------------------------
- drivers/net/phy/qcom/qca808x.c | 934 +++++++++++++++++++++++++++++++++
- 4 files changed, 942 insertions(+), 896 deletions(-)
- create mode 100644 drivers/net/phy/qcom/qca808x.c
-
---- a/drivers/net/phy/qcom/Kconfig
-+++ b/drivers/net/phy/qcom/Kconfig
-@@ -14,3 +14,9 @@ config QCA83XX_PHY
- 	select QCOM_NET_PHYLIB
- 	help
- 	  Currently supports the internal QCA8337(Internal qca8k PHY) model
-+
-+config QCA808X_PHY
-+	tristate "Qualcomm QCA808x PHYs"
-+	select QCOM_NET_PHYLIB
-+	help
-+	  Currently supports the QCA8081 model
---- a/drivers/net/phy/qcom/Makefile
-+++ b/drivers/net/phy/qcom/Makefile
-@@ -2,3 +2,4 @@
- obj-$(CONFIG_QCOM_NET_PHYLIB)	+= qcom-phy-lib.o
- obj-$(CONFIG_AT803X_PHY)	+= at803x.o
- obj-$(CONFIG_QCA83XX_PHY)	+= qca83xx.o
-+obj-$(CONFIG_QCA808X_PHY)	+= qca808x.o
---- a/drivers/net/phy/qcom/at803x.c
-+++ b/drivers/net/phy/qcom/at803x.c
-@@ -96,8 +96,6 @@
- #define ATH8035_PHY_ID				0x004dd072
- #define AT8030_PHY_ID_MASK			0xffffffef
- 
--#define QCA8081_PHY_ID				0x004dd101
--
- #define QCA9561_PHY_ID				0x004dd042
- 
- #define AT803X_PAGE_FIBER			0
-@@ -110,201 +108,7 @@
- /* disable hibernation mode */
- #define AT803X_DISABLE_HIBERNATION_MODE		BIT(2)
- 
--/* ADC threshold */
--#define QCA808X_PHY_DEBUG_ADC_THRESHOLD		0x2c80
--#define QCA808X_ADC_THRESHOLD_MASK		GENMASK(7, 0)
--#define QCA808X_ADC_THRESHOLD_80MV		0
--#define QCA808X_ADC_THRESHOLD_100MV		0xf0
--#define QCA808X_ADC_THRESHOLD_200MV		0x0f
--#define QCA808X_ADC_THRESHOLD_300MV		0xff
--
--/* CLD control */
--#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7		0x8007
--#define QCA808X_8023AZ_AFE_CTRL_MASK		GENMASK(8, 4)
--#define QCA808X_8023AZ_AFE_EN			0x90
--
--/* AZ control */
--#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL	0x8008
--#define QCA808X_MMD3_AZ_TRAINING_VAL		0x1c32
--
--#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB	0x8014
--#define QCA808X_MSE_THRESHOLD_20DB_VALUE	0x529
--
--#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB	0x800E
--#define QCA808X_MSE_THRESHOLD_17DB_VALUE	0x341
--
--#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB	0x801E
--#define QCA808X_MSE_THRESHOLD_27DB_VALUE	0x419
--
--#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB	0x8020
--#define QCA808X_MSE_THRESHOLD_28DB_VALUE	0x341
--
--#define QCA808X_PHY_MMD7_TOP_OPTION1		0x901c
--#define QCA808X_TOP_OPTION1_DATA		0x0
--
--#define QCA808X_PHY_MMD3_DEBUG_1		0xa100
--#define QCA808X_MMD3_DEBUG_1_VALUE		0x9203
--#define QCA808X_PHY_MMD3_DEBUG_2		0xa101
--#define QCA808X_MMD3_DEBUG_2_VALUE		0x48ad
--#define QCA808X_PHY_MMD3_DEBUG_3		0xa103
--#define QCA808X_MMD3_DEBUG_3_VALUE		0x1698
--#define QCA808X_PHY_MMD3_DEBUG_4		0xa105
--#define QCA808X_MMD3_DEBUG_4_VALUE		0x8001
--#define QCA808X_PHY_MMD3_DEBUG_5		0xa106
--#define QCA808X_MMD3_DEBUG_5_VALUE		0x1111
--#define QCA808X_PHY_MMD3_DEBUG_6		0xa011
--#define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
--
--/* master/slave seed config */
--#define QCA808X_PHY_DEBUG_LOCAL_SEED		9
--#define QCA808X_MASTER_SLAVE_SEED_ENABLE	BIT(1)
--#define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
--#define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
--
--/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
-- * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
-- */
--#define QCA808X_DBG_AN_TEST			0xb
--#define QCA808X_HIBERNATION_EN			BIT(15)
--
--#define QCA808X_CDT_ENABLE_TEST			BIT(15)
--#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
--#define QCA808X_CDT_STATUS			BIT(11)
--#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
--
--#define QCA808X_MMD3_CDT_STATUS			0x8064
--#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
--#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
--#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
--#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
--#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
--#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
--
--#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
--#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
--#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
--#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
--
--#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
--#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
--#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
--#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
--#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
--
--#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
--#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
--#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
--#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
--
--/* NORMAL are MDI with type set to 0 */
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
--									 QCA808X_CDT_STATUS_STAT_MDI1)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
--									 QCA808X_CDT_STATUS_STAT_MDI1)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
--									 QCA808X_CDT_STATUS_STAT_MDI2)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
--									 QCA808X_CDT_STATUS_STAT_MDI2)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
--									 QCA808X_CDT_STATUS_STAT_MDI3)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
--									 QCA808X_CDT_STATUS_STAT_MDI3)
--
--/* Added for reference of existence but should be handled by wait_for_completion already */
--#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
--
--#define QCA808X_MMD7_LED_GLOBAL			0x8073
--#define QCA808X_LED_BLINK_1			GENMASK(11, 6)
--#define QCA808X_LED_BLINK_2			GENMASK(5, 0)
--/* Values are the same for both BLINK_1 and BLINK_2 */
--#define QCA808X_LED_BLINK_FREQ_MASK		GENMASK(5, 3)
--#define QCA808X_LED_BLINK_FREQ_2HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
--#define QCA808X_LED_BLINK_FREQ_4HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
--#define QCA808X_LED_BLINK_FREQ_8HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
--#define QCA808X_LED_BLINK_FREQ_16HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
--#define QCA808X_LED_BLINK_FREQ_32HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
--#define QCA808X_LED_BLINK_FREQ_64HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
--#define QCA808X_LED_BLINK_FREQ_128HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
--#define QCA808X_LED_BLINK_FREQ_256HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
--#define QCA808X_LED_BLINK_DUTY_MASK		GENMASK(2, 0)
--#define QCA808X_LED_BLINK_DUTY_50_50		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
--#define QCA808X_LED_BLINK_DUTY_75_25		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
--#define QCA808X_LED_BLINK_DUTY_25_75		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
--#define QCA808X_LED_BLINK_DUTY_33_67		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
--#define QCA808X_LED_BLINK_DUTY_67_33		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
--#define QCA808X_LED_BLINK_DUTY_17_83		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
--#define QCA808X_LED_BLINK_DUTY_83_17		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
--#define QCA808X_LED_BLINK_DUTY_8_92		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
--
--#define QCA808X_MMD7_LED2_CTRL			0x8074
--#define QCA808X_MMD7_LED2_FORCE_CTRL		0x8075
--#define QCA808X_MMD7_LED1_CTRL			0x8076
--#define QCA808X_MMD7_LED1_FORCE_CTRL		0x8077
--#define QCA808X_MMD7_LED0_CTRL			0x8078
--#define QCA808X_MMD7_LED_CTRL(x)		(0x8078 - ((x) * 2))
--
--/* LED hw control pattern is the same for every LED */
--#define QCA808X_LED_PATTERN_MASK		GENMASK(15, 0)
--#define QCA808X_LED_SPEED2500_ON		BIT(15)
--#define QCA808X_LED_SPEED2500_BLINK		BIT(14)
--/* Follow blink trigger even if duplex or speed condition doesn't match */
--#define QCA808X_LED_BLINK_CHECK_BYPASS		BIT(13)
--#define QCA808X_LED_FULL_DUPLEX_ON		BIT(12)
--#define QCA808X_LED_HALF_DUPLEX_ON		BIT(11)
--#define QCA808X_LED_TX_BLINK			BIT(10)
--#define QCA808X_LED_RX_BLINK			BIT(9)
--#define QCA808X_LED_TX_ON_10MS			BIT(8)
--#define QCA808X_LED_RX_ON_10MS			BIT(7)
--#define QCA808X_LED_SPEED1000_ON		BIT(6)
--#define QCA808X_LED_SPEED100_ON			BIT(5)
--#define QCA808X_LED_SPEED10_ON			BIT(4)
--#define QCA808X_LED_COLLISION_BLINK		BIT(3)
--#define QCA808X_LED_SPEED1000_BLINK		BIT(2)
--#define QCA808X_LED_SPEED100_BLINK		BIT(1)
--#define QCA808X_LED_SPEED10_BLINK		BIT(0)
--
--#define QCA808X_MMD7_LED0_FORCE_CTRL		0x8079
--#define QCA808X_MMD7_LED_FORCE_CTRL(x)		(0x8079 - ((x) * 2))
--
--/* LED force ctrl is the same for every LED
-- * No documentation exist for this, not even internal one
-- * with NDA as QCOM gives only info about configuring
-- * hw control pattern rules and doesn't indicate any way
-- * to force the LED to specific mode.
-- * These define comes from reverse and testing and maybe
-- * lack of some info or some info are not entirely correct.
-- * For the basic LED control and hw control these finding
-- * are enough to support LED control in all the required APIs.
-- *
-- * On doing some comparison with implementation with qca807x,
-- * it was found that it's 1:1 equal to it and confirms all the
-- * reverse done. It was also found further specification with the
-- * force mode and the blink modes.
-- */
--#define QCA808X_LED_FORCE_EN			BIT(15)
--#define QCA808X_LED_FORCE_MODE_MASK		GENMASK(14, 13)
--#define QCA808X_LED_FORCE_BLINK_1		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
--#define QCA808X_LED_FORCE_BLINK_2		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
--#define QCA808X_LED_FORCE_ON			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
--#define QCA808X_LED_FORCE_OFF			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
--
--#define QCA808X_MMD7_LED_POLARITY_CTRL		0x901a
--/* QSDK sets by default 0x46 to this reg that sets BIT 6 for
-- * LED to active high. It's not clear what BIT 3 and BIT 4 does.
-- */
--#define QCA808X_LED_ACTIVE_HIGH			BIT(6)
--
--/* QCA808X 1G chip type */
--#define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
--#define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
--
--#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL	0x9072
--#define QCA8081_PHY_FIFO_RSTN			BIT(11)
--
--MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
-+MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
- MODULE_LICENSE("GPL");
- 
-@@ -318,7 +122,6 @@ struct at803x_priv {
- 	bool is_1000basex;
- 	struct regulator_dev *vddio_rdev;
- 	struct regulator_dev *vddh_rdev;
--	int led_polarity_mode;
- };
- 
- struct at803x_context {
-@@ -519,9 +322,6 @@ static int at803x_probe(struct phy_devic
- 	if (!priv)
- 		return -ENOMEM;
- 
--	/* Init LED polarity mode to -1 */
--	priv->led_polarity_mode = -1;
--
- 	phydev->priv = priv;
- 
- 	ret = at803x_parse_dt(phydev);
-@@ -1216,672 +1016,6 @@ static int at8035_probe(struct phy_devic
- 	return at8035_parse_dt(phydev);
- }
- 
--static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
--{
--	int ret;
--
--	/* Enable fast retrain */
--	ret = genphy_c45_fast_retrain(phydev, true);
--	if (ret)
--		return ret;
--
--	phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
--		      QCA808X_TOP_OPTION1_DATA);
--	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
--		      QCA808X_MSE_THRESHOLD_20DB_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
--		      QCA808X_MSE_THRESHOLD_17DB_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
--		      QCA808X_MSE_THRESHOLD_27DB_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
--		      QCA808X_MSE_THRESHOLD_28DB_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
--		      QCA808X_MMD3_DEBUG_1_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
--		      QCA808X_MMD3_DEBUG_4_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
--		      QCA808X_MMD3_DEBUG_5_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
--		      QCA808X_MMD3_DEBUG_3_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
--		      QCA808X_MMD3_DEBUG_6_VALUE);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
--		      QCA808X_MMD3_DEBUG_2_VALUE);
--
--	return 0;
--}
--
--static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
--{
--	u16 seed_value;
--
--	if (!enable)
--		return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
--				QCA808X_MASTER_SLAVE_SEED_ENABLE, 0);
--
--	seed_value = prandom_u32_max(QCA808X_MASTER_SLAVE_SEED_RANGE);
--	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
--			QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE,
--			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) |
--			QCA808X_MASTER_SLAVE_SEED_ENABLE);
--}
--
--static bool qca808x_is_prefer_master(struct phy_device *phydev)
--{
--	return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) ||
--		(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
--}
--
--static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
--{
--	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
--}
--
--static int qca808x_config_init(struct phy_device *phydev)
--{
--	int ret;
--
--	/* Active adc&vga on 802.3az for the link 1000M and 100M */
--	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
--			     QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
--	if (ret)
--		return ret;
--
--	/* Adjust the threshold on 802.3az for the link 1000M */
--	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
--			    QCA808X_PHY_MMD3_AZ_TRAINING_CTRL,
--			    QCA808X_MMD3_AZ_TRAINING_VAL);
--	if (ret)
--		return ret;
--
--	if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
--		/* Config the fast retrain for the link 2500M */
--		ret = qca808x_phy_fast_retrain_config(phydev);
--		if (ret)
--			return ret;
--
--		ret = genphy_read_master_slave(phydev);
--		if (ret < 0)
--			return ret;
--
--		if (!qca808x_is_prefer_master(phydev)) {
--			/* Enable seed and configure lower ramdom seed to make phy
--			 * linked as slave mode.
--			 */
--			ret = qca808x_phy_ms_seed_enable(phydev, true);
--			if (ret)
--				return ret;
--		}
--	}
--
--	/* Configure adc threshold as 100mv for the link 10M */
--	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
--				     QCA808X_ADC_THRESHOLD_MASK,
--				     QCA808X_ADC_THRESHOLD_100MV);
--}
--
--static int qca808x_read_status(struct phy_device *phydev)
--{
--	struct at803x_ss_mask ss_mask = { 0 };
--	int ret;
--
--	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
--	if (ret < 0)
--		return ret;
--
--	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
--			 ret & MDIO_AN_10GBT_STAT_LP2_5G);
--
--	ret = genphy_read_status(phydev);
--	if (ret)
--		return ret;
--
--	/* qca8081 takes the different bits for speed value from at803x */
--	ss_mask.speed_mask = QCA808X_SS_SPEED_MASK;
--	ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK);
--	ret = at803x_read_specific_status(phydev, ss_mask);
--	if (ret < 0)
--		return ret;
--
--	if (phydev->link) {
--		if (phydev->speed == SPEED_2500)
--			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
--		else
--			phydev->interface = PHY_INTERFACE_MODE_SGMII;
--	} else {
--		/* generate seed as a lower random value to make PHY linked as SLAVE easily,
--		 * except for master/slave configuration fault detected or the master mode
--		 * preferred.
--		 *
--		 * the reason for not putting this code into the function link_change_notify is
--		 * the corner case where the link partner is also the qca8081 PHY and the seed
--		 * value is configured as the same value, the link can't be up and no link change
--		 * occurs.
--		 */
--		if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
--			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
--			    qca808x_is_prefer_master(phydev)) {
--				qca808x_phy_ms_seed_enable(phydev, false);
--			} else {
--				qca808x_phy_ms_seed_enable(phydev, true);
--			}
--		}
--	}
--
--	return 0;
--}
--
--static int qca808x_soft_reset(struct phy_device *phydev)
--{
--	int ret;
--
--	ret = genphy_soft_reset(phydev);
--	if (ret < 0)
--		return ret;
--
--	if (qca808x_has_fast_retrain_or_slave_seed(phydev))
--		ret = qca808x_phy_ms_seed_enable(phydev, true);
--
--	return ret;
--}
--
--static bool qca808x_cdt_fault_length_valid(int cdt_code)
--{
--	switch (cdt_code) {
--	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
--		return true;
--	default:
--		return false;
--	}
--}
--
--static int qca808x_cable_test_result_trans(int cdt_code)
--{
--	switch (cdt_code) {
--	case QCA808X_CDT_STATUS_STAT_NORMAL:
--		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
--	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
--		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
--	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
--		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
--		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
--	case QCA808X_CDT_STATUS_STAT_FAIL:
--	default:
--		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
--	}
--}
--
--static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
--				    int result)
--{
--	int val;
--	u32 cdt_length_reg = 0;
--
--	switch (pair) {
--	case ETHTOOL_A_CABLE_PAIR_A:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
--		break;
--	case ETHTOOL_A_CABLE_PAIR_B:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
--		break;
--	case ETHTOOL_A_CABLE_PAIR_C:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
--		break;
--	case ETHTOOL_A_CABLE_PAIR_D:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
--	if (val < 0)
--		return val;
--
--	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
--		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
--	else
--		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
--
--	return at803x_cdt_fault_length(val);
--}
--
--static int qca808x_cable_test_start(struct phy_device *phydev)
--{
--	int ret;
--
--	/* perform CDT with the following configs:
--	 * 1. disable hibernation.
--	 * 2. force PHY working in MDI mode.
--	 * 3. for PHY working in 1000BaseT.
--	 * 4. configure the threshold.
--	 */
--
--	ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
--	if (ret < 0)
--		return ret;
--
--	ret = at803x_config_mdix(phydev, ETH_TP_MDI);
--	if (ret < 0)
--		return ret;
--
--	/* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
--	phydev->duplex = DUPLEX_FULL;
--	phydev->speed = SPEED_1000;
--	ret = genphy_c45_pma_setup_forced(phydev);
--	if (ret < 0)
--		return ret;
--
--	ret = genphy_setup_forced(phydev);
--	if (ret < 0)
--		return ret;
--
--	/* configure the thresholds for open, short, pair ok test */
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
--	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
--
--	return 0;
--}
--
--static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
--					      u16 status)
--{
--	int length, result;
--	u16 pair_code;
--
--	switch (pair) {
--	case ETHTOOL_A_CABLE_PAIR_A:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
--		break;
--	case ETHTOOL_A_CABLE_PAIR_B:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
--		break;
--	case ETHTOOL_A_CABLE_PAIR_C:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
--		break;
--	case ETHTOOL_A_CABLE_PAIR_D:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	result = qca808x_cable_test_result_trans(pair_code);
--	ethnl_cable_test_result(phydev, pair, result);
--
--	if (qca808x_cdt_fault_length_valid(pair_code)) {
--		length = qca808x_cdt_fault_length(phydev, pair, result);
--		ethnl_cable_test_fault_length(phydev, pair, length);
--	}
--
--	return 0;
--}
--
--static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
--{
--	int ret, val;
--
--	*finished = false;
--
--	val = QCA808X_CDT_ENABLE_TEST |
--	      QCA808X_CDT_LENGTH_UNIT;
--	ret = at803x_cdt_start(phydev, val);
--	if (ret)
--		return ret;
--
--	ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
--	if (ret)
--		return ret;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
--	if (val < 0)
--		return val;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
--	if (ret)
--		return ret;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
--	if (ret)
--		return ret;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
--	if (ret)
--		return ret;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
--	if (ret)
--		return ret;
--
--	*finished = true;
--
--	return 0;
--}
--
--static int qca808x_get_features(struct phy_device *phydev)
--{
--	int ret;
--
--	ret = genphy_c45_pma_read_abilities(phydev);
--	if (ret)
--		return ret;
--
--	/* The autoneg ability is not existed in bit3 of MMD7.1,
--	 * but it is supported by qca808x PHY, so we add it here
--	 * manually.
--	 */
--	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
--
--	/* As for the qca8081 1G version chip, the 2500baseT ability is also
--	 * existed in the bit0 of MMD1.21, we need to remove it manually if
--	 * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
--	 */
--	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
--	if (ret < 0)
--		return ret;
--
--	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
--		linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
--
--	return 0;
--}
--
--static int qca808x_config_aneg(struct phy_device *phydev)
--{
--	int phy_ctrl = 0;
--	int ret;
--
--	ret = at803x_prepare_config_aneg(phydev);
--	if (ret)
--		return ret;
--
--	/* The reg MII_BMCR also needs to be configured for force mode, the
--	 * genphy_config_aneg is also needed.
--	 */
--	if (phydev->autoneg == AUTONEG_DISABLE)
--		genphy_c45_pma_setup_forced(phydev);
--
--	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
--		phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
--
--	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
--				     MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
--	if (ret < 0)
--		return ret;
--
--	return __genphy_config_aneg(phydev, ret);
--}
--
--static void qca808x_link_change_notify(struct phy_device *phydev)
--{
--	/* Assert interface sgmii fifo on link down, deassert it on link up,
--	 * the interface device address is always phy address added by 1.
--	 */
--	mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
--				   MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
--				   QCA8081_PHY_FIFO_RSTN,
--				   phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
--}
--
--static int qca808x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
--				    u16 *offload_trigger)
--{
--	/* Parsing specific to netdev trigger */
--	if (test_bit(TRIGGER_NETDEV_TX, &rules))
--		*offload_trigger |= QCA808X_LED_TX_BLINK;
--	if (test_bit(TRIGGER_NETDEV_RX, &rules))
--		*offload_trigger |= QCA808X_LED_RX_BLINK;
--	if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
--		*offload_trigger |= QCA808X_LED_SPEED10_ON;
--	if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
--		*offload_trigger |= QCA808X_LED_SPEED100_ON;
--	if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
--		*offload_trigger |= QCA808X_LED_SPEED1000_ON;
--	if (test_bit(TRIGGER_NETDEV_LINK_2500, &rules))
--		*offload_trigger |= QCA808X_LED_SPEED2500_ON;
--	if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
--		*offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
--	if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
--		*offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
--
--	if (rules && !*offload_trigger)
--		return -EOPNOTSUPP;
--
--	/* Enable BLINK_CHECK_BYPASS by default to make the LED
--	 * blink even with duplex or speed mode not enabled.
--	 */
--	*offload_trigger |= QCA808X_LED_BLINK_CHECK_BYPASS;
--
--	return 0;
--}
--
--static int qca808x_led_hw_control_enable(struct phy_device *phydev, u8 index)
--{
--	u16 reg;
--
--	if (index > 2)
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
--				  QCA808X_LED_FORCE_EN);
--}
--
--static int qca808x_led_hw_is_supported(struct phy_device *phydev, u8 index,
--				       unsigned long rules)
--{
--	u16 offload_trigger = 0;
--
--	if (index > 2)
--		return -EINVAL;
--
--	return qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
--}
--
--static int qca808x_led_hw_control_set(struct phy_device *phydev, u8 index,
--				      unsigned long rules)
--{
--	u16 reg, offload_trigger = 0;
--	int ret;
--
--	if (index > 2)
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_CTRL(index);
--
--	ret = qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
--	if (ret)
--		return ret;
--
--	ret = qca808x_led_hw_control_enable(phydev, index);
--	if (ret)
--		return ret;
--
--	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
--			      QCA808X_LED_PATTERN_MASK,
--			      offload_trigger);
--}
--
--static bool qca808x_led_hw_control_status(struct phy_device *phydev, u8 index)
--{
--	u16 reg;
--	int val;
--
--	if (index > 2)
--		return false;
--
--	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
--
--	return !(val & QCA808X_LED_FORCE_EN);
--}
--
--static int qca808x_led_hw_control_get(struct phy_device *phydev, u8 index,
--				      unsigned long *rules)
--{
--	u16 reg;
--	int val;
--
--	if (index > 2)
--		return -EINVAL;
--
--	/* Check if we have hw control enabled */
--	if (qca808x_led_hw_control_status(phydev, index))
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_CTRL(index);
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
--	if (val & QCA808X_LED_TX_BLINK)
--		set_bit(TRIGGER_NETDEV_TX, rules);
--	if (val & QCA808X_LED_RX_BLINK)
--		set_bit(TRIGGER_NETDEV_RX, rules);
--	if (val & QCA808X_LED_SPEED10_ON)
--		set_bit(TRIGGER_NETDEV_LINK_10, rules);
--	if (val & QCA808X_LED_SPEED100_ON)
--		set_bit(TRIGGER_NETDEV_LINK_100, rules);
--	if (val & QCA808X_LED_SPEED1000_ON)
--		set_bit(TRIGGER_NETDEV_LINK_1000, rules);
--	if (val & QCA808X_LED_SPEED2500_ON)
--		set_bit(TRIGGER_NETDEV_LINK_2500, rules);
--	if (val & QCA808X_LED_HALF_DUPLEX_ON)
--		set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
--	if (val & QCA808X_LED_FULL_DUPLEX_ON)
--		set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
--
--	return 0;
--}
--
--static int qca808x_led_hw_control_reset(struct phy_device *phydev, u8 index)
--{
--	u16 reg;
--
--	if (index > 2)
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_CTRL(index);
--
--	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
--				  QCA808X_LED_PATTERN_MASK);
--}
--
--static int qca808x_led_brightness_set(struct phy_device *phydev,
--				      u8 index, enum led_brightness value)
--{
--	u16 reg;
--	int ret;
--
--	if (index > 2)
--		return -EINVAL;
--
--	if (!value) {
--		ret = qca808x_led_hw_control_reset(phydev, index);
--		if (ret)
--			return ret;
--	}
--
--	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
--			      QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
--			      QCA808X_LED_FORCE_EN | value ? QCA808X_LED_FORCE_ON :
--							     QCA808X_LED_FORCE_OFF);
--}
--
--static int qca808x_led_blink_set(struct phy_device *phydev, u8 index,
--				 unsigned long *delay_on,
--				 unsigned long *delay_off)
--{
--	int ret;
--	u16 reg;
--
--	if (index > 2)
--		return -EINVAL;
--
--	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	/* Set blink to 50% off, 50% on at 4Hz by default */
--	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
--			     QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
--			     QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
--	if (ret)
--		return ret;
--
--	/* We use BLINK_1 for normal blinking */
--	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
--			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
--			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
--	if (ret)
--		return ret;
--
--	/* We set blink to 4Hz, aka 250ms */
--	*delay_on = 250 / 2;
--	*delay_off = 250 / 2;
--
--	return 0;
--}
--
--static int qca808x_led_polarity_set(struct phy_device *phydev, int index,
--				    unsigned long modes)
--{
--	struct at803x_priv *priv = phydev->priv;
--	bool active_low = false;
--	u32 mode;
--
--	for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
--		switch (mode) {
--		case PHY_LED_ACTIVE_LOW:
--			active_low = true;
--			break;
--		default:
--			return -EINVAL;
--		}
--	}
--
--	/* PHY polarity is global and can't be set per LED.
--	 * To detect this, check if last requested polarity mode
--	 * match the new one.
--	 */
--	if (priv->led_polarity_mode >= 0 &&
--	    priv->led_polarity_mode != active_low) {
--		phydev_err(phydev, "PHY polarity is global. Mismatched polarity on different LED\n");
--		return -EINVAL;
--	}
--
--	/* Save the last PHY polarity mode */
--	priv->led_polarity_mode = active_low;
--
--	return phy_modify_mmd(phydev, MDIO_MMD_AN,
--			      QCA808X_MMD7_LED_POLARITY_CTRL,
--			      QCA808X_LED_ACTIVE_HIGH,
--			      active_low ? 0 : QCA808X_LED_ACTIVE_HIGH);
--}
--
- static struct phy_driver at803x_driver[] = {
- {
- 	/* Qualcomm Atheros AR8035 */
-@@ -1989,34 +1123,6 @@ static struct phy_driver at803x_driver[]
- 	.read_status		= at803x_read_status,
- 	.soft_reset		= genphy_soft_reset,
- 	.config_aneg		= at803x_config_aneg,
--}, {
--	/* Qualcomm QCA8081 */
--	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
--	.name			= "Qualcomm QCA8081",
--	.flags			= PHY_POLL_CABLE_TEST,
--	.probe			= at803x_probe,
--	.config_intr		= at803x_config_intr,
--	.handle_interrupt	= at803x_handle_interrupt,
--	.get_tunable		= at803x_get_tunable,
--	.set_tunable		= at803x_set_tunable,
--	.set_wol		= at803x_set_wol,
--	.get_wol		= at803x_get_wol,
--	.get_features		= qca808x_get_features,
--	.config_aneg		= qca808x_config_aneg,
--	.suspend		= genphy_suspend,
--	.resume			= genphy_resume,
--	.read_status		= qca808x_read_status,
--	.config_init		= qca808x_config_init,
--	.soft_reset		= qca808x_soft_reset,
--	.cable_test_start	= qca808x_cable_test_start,
--	.cable_test_get_status	= qca808x_cable_test_get_status,
--	.link_change_notify	= qca808x_link_change_notify,
--	.led_brightness_set	= qca808x_led_brightness_set,
--	.led_blink_set		= qca808x_led_blink_set,
--	.led_hw_is_supported	= qca808x_led_hw_is_supported,
--	.led_hw_control_set	= qca808x_led_hw_control_set,
--	.led_hw_control_get	= qca808x_led_hw_control_get,
--	.led_polarity_set	= qca808x_led_polarity_set,
- }, };
- 
- module_phy_driver(at803x_driver);
-@@ -2028,7 +1134,6 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
- 	{ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) },
--	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
- 	{ }
- };
- 
---- /dev/null
-+++ b/drivers/net/phy/qcom/qca808x.c
-@@ -0,0 +1,934 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+
-+#include <linux/phy.h>
-+#include <linux/module.h>
-+#include <linux/ethtool_netlink.h>
-+
-+#include "qcom.h"
-+
-+/* ADC threshold */
-+#define QCA808X_PHY_DEBUG_ADC_THRESHOLD		0x2c80
-+#define QCA808X_ADC_THRESHOLD_MASK		GENMASK(7, 0)
-+#define QCA808X_ADC_THRESHOLD_80MV		0
-+#define QCA808X_ADC_THRESHOLD_100MV		0xf0
-+#define QCA808X_ADC_THRESHOLD_200MV		0x0f
-+#define QCA808X_ADC_THRESHOLD_300MV		0xff
-+
-+/* CLD control */
-+#define QCA808X_PHY_MMD3_ADDR_CLD_CTRL7		0x8007
-+#define QCA808X_8023AZ_AFE_CTRL_MASK		GENMASK(8, 4)
-+#define QCA808X_8023AZ_AFE_EN			0x90
-+
-+/* AZ control */
-+#define QCA808X_PHY_MMD3_AZ_TRAINING_CTRL	0x8008
-+#define QCA808X_MMD3_AZ_TRAINING_VAL		0x1c32
-+
-+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB	0x8014
-+#define QCA808X_MSE_THRESHOLD_20DB_VALUE	0x529
-+
-+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB	0x800E
-+#define QCA808X_MSE_THRESHOLD_17DB_VALUE	0x341
-+
-+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB	0x801E
-+#define QCA808X_MSE_THRESHOLD_27DB_VALUE	0x419
-+
-+#define QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB	0x8020
-+#define QCA808X_MSE_THRESHOLD_28DB_VALUE	0x341
-+
-+#define QCA808X_PHY_MMD7_TOP_OPTION1		0x901c
-+#define QCA808X_TOP_OPTION1_DATA		0x0
-+
-+#define QCA808X_PHY_MMD3_DEBUG_1		0xa100
-+#define QCA808X_MMD3_DEBUG_1_VALUE		0x9203
-+#define QCA808X_PHY_MMD3_DEBUG_2		0xa101
-+#define QCA808X_MMD3_DEBUG_2_VALUE		0x48ad
-+#define QCA808X_PHY_MMD3_DEBUG_3		0xa103
-+#define QCA808X_MMD3_DEBUG_3_VALUE		0x1698
-+#define QCA808X_PHY_MMD3_DEBUG_4		0xa105
-+#define QCA808X_MMD3_DEBUG_4_VALUE		0x8001
-+#define QCA808X_PHY_MMD3_DEBUG_5		0xa106
-+#define QCA808X_MMD3_DEBUG_5_VALUE		0x1111
-+#define QCA808X_PHY_MMD3_DEBUG_6		0xa011
-+#define QCA808X_MMD3_DEBUG_6_VALUE		0x5f85
-+
-+/* master/slave seed config */
-+#define QCA808X_PHY_DEBUG_LOCAL_SEED		9
-+#define QCA808X_MASTER_SLAVE_SEED_ENABLE	BIT(1)
-+#define QCA808X_MASTER_SLAVE_SEED_CFG		GENMASK(12, 2)
-+#define QCA808X_MASTER_SLAVE_SEED_RANGE		0x32
-+
-+/* Hibernation yields lower power consumpiton in contrast with normal operation mode.
-+ * when the copper cable is unplugged, the PHY enters into hibernation mode in about 10s.
-+ */
-+#define QCA808X_DBG_AN_TEST			0xb
-+#define QCA808X_HIBERNATION_EN			BIT(15)
-+
-+#define QCA808X_CDT_ENABLE_TEST			BIT(15)
-+#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
-+#define QCA808X_CDT_STATUS			BIT(11)
-+#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
-+
-+#define QCA808X_MMD3_CDT_STATUS			0x8064
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
-+#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
-+#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
-+
-+#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
-+#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
-+#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
-+#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
-+
-+#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
-+#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
-+#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
-+#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
-+#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
-+
-+#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
-+#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
-+#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
-+#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
-+
-+/* NORMAL are MDI with type set to 0 */
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI1)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI1)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI2)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI2)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI3)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI3)
-+
-+/* Added for reference of existence but should be handled by wait_for_completion already */
-+#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
-+
-+#define QCA808X_MMD7_LED_GLOBAL			0x8073
-+#define QCA808X_LED_BLINK_1			GENMASK(11, 6)
-+#define QCA808X_LED_BLINK_2			GENMASK(5, 0)
-+/* Values are the same for both BLINK_1 and BLINK_2 */
-+#define QCA808X_LED_BLINK_FREQ_MASK		GENMASK(5, 3)
-+#define QCA808X_LED_BLINK_FREQ_2HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
-+#define QCA808X_LED_BLINK_FREQ_4HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
-+#define QCA808X_LED_BLINK_FREQ_8HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
-+#define QCA808X_LED_BLINK_FREQ_16HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
-+#define QCA808X_LED_BLINK_FREQ_32HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
-+#define QCA808X_LED_BLINK_FREQ_64HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
-+#define QCA808X_LED_BLINK_FREQ_128HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
-+#define QCA808X_LED_BLINK_FREQ_256HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
-+#define QCA808X_LED_BLINK_DUTY_MASK		GENMASK(2, 0)
-+#define QCA808X_LED_BLINK_DUTY_50_50		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
-+#define QCA808X_LED_BLINK_DUTY_75_25		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
-+#define QCA808X_LED_BLINK_DUTY_25_75		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
-+#define QCA808X_LED_BLINK_DUTY_33_67		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
-+#define QCA808X_LED_BLINK_DUTY_67_33		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
-+#define QCA808X_LED_BLINK_DUTY_17_83		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
-+#define QCA808X_LED_BLINK_DUTY_83_17		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
-+#define QCA808X_LED_BLINK_DUTY_8_92		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
-+
-+#define QCA808X_MMD7_LED2_CTRL			0x8074
-+#define QCA808X_MMD7_LED2_FORCE_CTRL		0x8075
-+#define QCA808X_MMD7_LED1_CTRL			0x8076
-+#define QCA808X_MMD7_LED1_FORCE_CTRL		0x8077
-+#define QCA808X_MMD7_LED0_CTRL			0x8078
-+#define QCA808X_MMD7_LED_CTRL(x)		(0x8078 - ((x) * 2))
-+
-+/* LED hw control pattern is the same for every LED */
-+#define QCA808X_LED_PATTERN_MASK		GENMASK(15, 0)
-+#define QCA808X_LED_SPEED2500_ON		BIT(15)
-+#define QCA808X_LED_SPEED2500_BLINK		BIT(14)
-+/* Follow blink trigger even if duplex or speed condition doesn't match */
-+#define QCA808X_LED_BLINK_CHECK_BYPASS		BIT(13)
-+#define QCA808X_LED_FULL_DUPLEX_ON		BIT(12)
-+#define QCA808X_LED_HALF_DUPLEX_ON		BIT(11)
-+#define QCA808X_LED_TX_BLINK			BIT(10)
-+#define QCA808X_LED_RX_BLINK			BIT(9)
-+#define QCA808X_LED_TX_ON_10MS			BIT(8)
-+#define QCA808X_LED_RX_ON_10MS			BIT(7)
-+#define QCA808X_LED_SPEED1000_ON		BIT(6)
-+#define QCA808X_LED_SPEED100_ON			BIT(5)
-+#define QCA808X_LED_SPEED10_ON			BIT(4)
-+#define QCA808X_LED_COLLISION_BLINK		BIT(3)
-+#define QCA808X_LED_SPEED1000_BLINK		BIT(2)
-+#define QCA808X_LED_SPEED100_BLINK		BIT(1)
-+#define QCA808X_LED_SPEED10_BLINK		BIT(0)
-+
-+#define QCA808X_MMD7_LED0_FORCE_CTRL		0x8079
-+#define QCA808X_MMD7_LED_FORCE_CTRL(x)		(0x8079 - ((x) * 2))
-+
-+/* LED force ctrl is the same for every LED
-+ * No documentation exist for this, not even internal one
-+ * with NDA as QCOM gives only info about configuring
-+ * hw control pattern rules and doesn't indicate any way
-+ * to force the LED to specific mode.
-+ * These define comes from reverse and testing and maybe
-+ * lack of some info or some info are not entirely correct.
-+ * For the basic LED control and hw control these finding
-+ * are enough to support LED control in all the required APIs.
-+ *
-+ * On doing some comparison with implementation with qca807x,
-+ * it was found that it's 1:1 equal to it and confirms all the
-+ * reverse done. It was also found further specification with the
-+ * force mode and the blink modes.
-+ */
-+#define QCA808X_LED_FORCE_EN			BIT(15)
-+#define QCA808X_LED_FORCE_MODE_MASK		GENMASK(14, 13)
-+#define QCA808X_LED_FORCE_BLINK_1		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
-+#define QCA808X_LED_FORCE_BLINK_2		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
-+#define QCA808X_LED_FORCE_ON			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
-+#define QCA808X_LED_FORCE_OFF			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
-+
-+#define QCA808X_MMD7_LED_POLARITY_CTRL		0x901a
-+/* QSDK sets by default 0x46 to this reg that sets BIT 6 for
-+ * LED to active high. It's not clear what BIT 3 and BIT 4 does.
-+ */
-+#define QCA808X_LED_ACTIVE_HIGH			BIT(6)
-+
-+/* QCA808X 1G chip type */
-+#define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
-+#define QCA808X_PHY_CHIP_TYPE_1G		BIT(0)
-+
-+#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL	0x9072
-+#define QCA8081_PHY_FIFO_RSTN			BIT(11)
-+
-+#define QCA8081_PHY_ID				0x004dd101
-+
-+MODULE_DESCRIPTION("Qualcomm Atheros QCA808X PHY driver");
-+MODULE_AUTHOR("Matus Ujhelyi");
-+MODULE_LICENSE("GPL");
-+
-+struct qca808x_priv {
-+	int led_polarity_mode;
-+};
-+
-+static int qca808x_phy_fast_retrain_config(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* Enable fast retrain */
-+	ret = genphy_c45_fast_retrain(phydev, true);
-+	if (ret)
-+		return ret;
-+
-+	phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1,
-+		      QCA808X_TOP_OPTION1_DATA);
-+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB,
-+		      QCA808X_MSE_THRESHOLD_20DB_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB,
-+		      QCA808X_MSE_THRESHOLD_17DB_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB,
-+		      QCA808X_MSE_THRESHOLD_27DB_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB,
-+		      QCA808X_MSE_THRESHOLD_28DB_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1,
-+		      QCA808X_MMD3_DEBUG_1_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4,
-+		      QCA808X_MMD3_DEBUG_4_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5,
-+		      QCA808X_MMD3_DEBUG_5_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3,
-+		      QCA808X_MMD3_DEBUG_3_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6,
-+		      QCA808X_MMD3_DEBUG_6_VALUE);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2,
-+		      QCA808X_MMD3_DEBUG_2_VALUE);
-+
-+	return 0;
-+}
-+
-+static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable)
-+{
-+	u16 seed_value;
-+
-+	if (!enable)
-+		return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
-+				QCA808X_MASTER_SLAVE_SEED_ENABLE, 0);
-+
-+	seed_value = prandom_u32_max(QCA808X_MASTER_SLAVE_SEED_RANGE);
-+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED,
-+			QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE,
-+			FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) |
-+			QCA808X_MASTER_SLAVE_SEED_ENABLE);
-+}
-+
-+static bool qca808x_is_prefer_master(struct phy_device *phydev)
-+{
-+	return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) ||
-+		(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
-+}
-+
-+static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
-+{
-+	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
-+}
-+
-+static int qca808x_probe(struct phy_device *phydev)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	struct qca808x_priv *priv;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	/* Init LED polarity mode to -1 */
-+	priv->led_polarity_mode = -1;
-+
-+	phydev->priv = priv;
-+
-+	return 0;
-+}
-+
-+static int qca808x_config_init(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* Active adc&vga on 802.3az for the link 1000M and 100M */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
-+			     QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
-+	if (ret)
-+		return ret;
-+
-+	/* Adjust the threshold on 802.3az for the link 1000M */
-+	ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
-+			    QCA808X_PHY_MMD3_AZ_TRAINING_CTRL,
-+			    QCA808X_MMD3_AZ_TRAINING_VAL);
-+	if (ret)
-+		return ret;
-+
-+	if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
-+		/* Config the fast retrain for the link 2500M */
-+		ret = qca808x_phy_fast_retrain_config(phydev);
-+		if (ret)
-+			return ret;
-+
-+		ret = genphy_read_master_slave(phydev);
-+		if (ret < 0)
-+			return ret;
-+
-+		if (!qca808x_is_prefer_master(phydev)) {
-+			/* Enable seed and configure lower ramdom seed to make phy
-+			 * linked as slave mode.
-+			 */
-+			ret = qca808x_phy_ms_seed_enable(phydev, true);
-+			if (ret)
-+				return ret;
-+		}
-+	}
-+
-+	/* Configure adc threshold as 100mv for the link 10M */
-+	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
-+				     QCA808X_ADC_THRESHOLD_MASK,
-+				     QCA808X_ADC_THRESHOLD_100MV);
-+}
-+
-+static int qca808x_read_status(struct phy_device *phydev)
-+{
-+	struct at803x_ss_mask ss_mask = { 0 };
-+	int ret;
-+
-+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT);
-+	if (ret < 0)
-+		return ret;
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising,
-+			 ret & MDIO_AN_10GBT_STAT_LP2_5G);
-+
-+	ret = genphy_read_status(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* qca8081 takes the different bits for speed value from at803x */
-+	ss_mask.speed_mask = QCA808X_SS_SPEED_MASK;
-+	ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK);
-+	ret = at803x_read_specific_status(phydev, ss_mask);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (phydev->link) {
-+		if (phydev->speed == SPEED_2500)
-+			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-+		else
-+			phydev->interface = PHY_INTERFACE_MODE_SGMII;
-+	} else {
-+		/* generate seed as a lower random value to make PHY linked as SLAVE easily,
-+		 * except for master/slave configuration fault detected or the master mode
-+		 * preferred.
-+		 *
-+		 * the reason for not putting this code into the function link_change_notify is
-+		 * the corner case where the link partner is also the qca8081 PHY and the seed
-+		 * value is configured as the same value, the link can't be up and no link change
-+		 * occurs.
-+		 */
-+		if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
-+			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
-+			    qca808x_is_prefer_master(phydev)) {
-+				qca808x_phy_ms_seed_enable(phydev, false);
-+			} else {
-+				qca808x_phy_ms_seed_enable(phydev, true);
-+			}
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int qca808x_soft_reset(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = genphy_soft_reset(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (qca808x_has_fast_retrain_or_slave_seed(phydev))
-+		ret = qca808x_phy_ms_seed_enable(phydev, true);
-+
-+	return ret;
-+}
-+
-+static bool qca808x_cdt_fault_length_valid(int cdt_code)
-+{
-+	switch (cdt_code) {
-+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
-+		return true;
-+	default:
-+		return false;
-+	}
-+}
-+
-+static int qca808x_cable_test_result_trans(int cdt_code)
-+{
-+	switch (cdt_code) {
-+	case QCA808X_CDT_STATUS_STAT_NORMAL:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
-+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
-+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
-+	case QCA808X_CDT_STATUS_STAT_FAIL:
-+	default:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
-+	}
-+}
-+
-+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
-+				    int result)
-+{
-+	int val;
-+	u32 cdt_length_reg = 0;
-+
-+	switch (pair) {
-+	case ETHTOOL_A_CABLE_PAIR_A:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_B:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_C:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_D:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
-+	if (val < 0)
-+		return val;
-+
-+	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
-+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
-+	else
-+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
-+
-+	return at803x_cdt_fault_length(val);
-+}
-+
-+static int qca808x_cable_test_start(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* perform CDT with the following configs:
-+	 * 1. disable hibernation.
-+	 * 2. force PHY working in MDI mode.
-+	 * 3. for PHY working in 1000BaseT.
-+	 * 4. configure the threshold.
-+	 */
-+
-+	ret = at803x_debug_reg_mask(phydev, QCA808X_DBG_AN_TEST, QCA808X_HIBERNATION_EN, 0);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = at803x_config_mdix(phydev, ETH_TP_MDI);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Force 1000base-T needs to configure PMA/PMD and MII_BMCR */
-+	phydev->duplex = DUPLEX_FULL;
-+	phydev->speed = SPEED_1000;
-+	ret = genphy_c45_pma_setup_forced(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = genphy_setup_forced(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* configure the thresholds for open, short, pair ok test */
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8074, 0xc040);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8076, 0xc040);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8077, 0xa060);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8078, 0xc050);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
-+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
-+
-+	return 0;
-+}
-+
-+static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
-+					      u16 status)
-+{
-+	int length, result;
-+	u16 pair_code;
-+
-+	switch (pair) {
-+	case ETHTOOL_A_CABLE_PAIR_A:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_B:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_C:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_D:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	result = qca808x_cable_test_result_trans(pair_code);
-+	ethnl_cable_test_result(phydev, pair, result);
-+
-+	if (qca808x_cdt_fault_length_valid(pair_code)) {
-+		length = qca808x_cdt_fault_length(phydev, pair, result);
-+		ethnl_cable_test_fault_length(phydev, pair, length);
-+	}
-+
-+	return 0;
-+}
-+
-+static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
-+{
-+	int ret, val;
-+
-+	*finished = false;
-+
-+	val = QCA808X_CDT_ENABLE_TEST |
-+	      QCA808X_CDT_LENGTH_UNIT;
-+	ret = at803x_cdt_start(phydev, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
-+	if (ret)
-+		return ret;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
-+	if (val < 0)
-+		return val;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
-+	if (ret)
-+		return ret;
-+
-+	*finished = true;
-+
-+	return 0;
-+}
-+
-+static int qca808x_get_features(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = genphy_c45_pma_read_abilities(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* The autoneg ability is not existed in bit3 of MMD7.1,
-+	 * but it is supported by qca808x PHY, so we add it here
-+	 * manually.
-+	 */
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
-+
-+	/* As for the qca8081 1G version chip, the 2500baseT ability is also
-+	 * existed in the bit0 of MMD1.21, we need to remove it manually if
-+	 * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
-+	 */
-+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
-+		linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
-+
-+	return 0;
-+}
-+
-+static int qca808x_config_aneg(struct phy_device *phydev)
-+{
-+	int phy_ctrl = 0;
-+	int ret;
-+
-+	ret = at803x_prepare_config_aneg(phydev);
-+	if (ret)
-+		return ret;
-+
-+	/* The reg MII_BMCR also needs to be configured for force mode, the
-+	 * genphy_config_aneg is also needed.
-+	 */
-+	if (phydev->autoneg == AUTONEG_DISABLE)
-+		genphy_c45_pma_setup_forced(phydev);
-+
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
-+		phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
-+
-+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-+				     MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
-+	if (ret < 0)
-+		return ret;
-+
-+	return __genphy_config_aneg(phydev, ret);
-+}
-+
-+static void qca808x_link_change_notify(struct phy_device *phydev)
-+{
-+	/* Assert interface sgmii fifo on link down, deassert it on link up,
-+	 * the interface device address is always phy address added by 1.
-+	 */
-+	mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1,
-+				   MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL,
-+				   QCA8081_PHY_FIFO_RSTN,
-+				   phydev->link ? QCA8081_PHY_FIFO_RSTN : 0);
-+}
-+
-+static int qca808x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
-+				    u16 *offload_trigger)
-+{
-+	/* Parsing specific to netdev trigger */
-+	if (test_bit(TRIGGER_NETDEV_TX, &rules))
-+		*offload_trigger |= QCA808X_LED_TX_BLINK;
-+	if (test_bit(TRIGGER_NETDEV_RX, &rules))
-+		*offload_trigger |= QCA808X_LED_RX_BLINK;
-+	if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED10_ON;
-+	if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED100_ON;
-+	if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED1000_ON;
-+	if (test_bit(TRIGGER_NETDEV_LINK_2500, &rules))
-+		*offload_trigger |= QCA808X_LED_SPEED2500_ON;
-+	if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
-+		*offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
-+	if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
-+		*offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
-+
-+	if (rules && !*offload_trigger)
-+		return -EOPNOTSUPP;
-+
-+	/* Enable BLINK_CHECK_BYPASS by default to make the LED
-+	 * blink even with duplex or speed mode not enabled.
-+	 */
-+	*offload_trigger |= QCA808X_LED_BLINK_CHECK_BYPASS;
-+
-+	return 0;
-+}
-+
-+static int qca808x_led_hw_control_enable(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
-+				  QCA808X_LED_FORCE_EN);
-+}
-+
-+static int qca808x_led_hw_is_supported(struct phy_device *phydev, u8 index,
-+				       unsigned long rules)
-+{
-+	u16 offload_trigger = 0;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	return qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
-+}
-+
-+static int qca808x_led_hw_control_set(struct phy_device *phydev, u8 index,
-+				      unsigned long rules)
-+{
-+	u16 reg, offload_trigger = 0;
-+	int ret;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_CTRL(index);
-+
-+	ret = qca808x_led_parse_netdev(phydev, rules, &offload_trigger);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_led_hw_control_enable(phydev, index);
-+	if (ret)
-+		return ret;
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			      QCA808X_LED_PATTERN_MASK,
-+			      offload_trigger);
-+}
-+
-+static bool qca808x_led_hw_control_status(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+	int val;
-+
-+	if (index > 2)
-+		return false;
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-+
-+	return !(val & QCA808X_LED_FORCE_EN);
-+}
-+
-+static int qca808x_led_hw_control_get(struct phy_device *phydev, u8 index,
-+				      unsigned long *rules)
-+{
-+	u16 reg;
-+	int val;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	/* Check if we have hw control enabled */
-+	if (qca808x_led_hw_control_status(phydev, index))
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_CTRL(index);
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-+	if (val & QCA808X_LED_TX_BLINK)
-+		set_bit(TRIGGER_NETDEV_TX, rules);
-+	if (val & QCA808X_LED_RX_BLINK)
-+		set_bit(TRIGGER_NETDEV_RX, rules);
-+	if (val & QCA808X_LED_SPEED10_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_10, rules);
-+	if (val & QCA808X_LED_SPEED100_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_100, rules);
-+	if (val & QCA808X_LED_SPEED1000_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_1000, rules);
-+	if (val & QCA808X_LED_SPEED2500_ON)
-+		set_bit(TRIGGER_NETDEV_LINK_2500, rules);
-+	if (val & QCA808X_LED_HALF_DUPLEX_ON)
-+		set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
-+	if (val & QCA808X_LED_FULL_DUPLEX_ON)
-+		set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
-+
-+	return 0;
-+}
-+
-+static int qca808x_led_hw_control_reset(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_CTRL(index);
-+
-+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
-+				  QCA808X_LED_PATTERN_MASK);
-+}
-+
-+static int qca808x_led_brightness_set(struct phy_device *phydev,
-+				      u8 index, enum led_brightness value)
-+{
-+	u16 reg;
-+	int ret;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	if (!value) {
-+		ret = qca808x_led_hw_control_reset(phydev, index);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			      QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
-+			      QCA808X_LED_FORCE_EN | value ? QCA808X_LED_FORCE_ON :
-+							     QCA808X_LED_FORCE_OFF);
-+}
-+
-+static int qca808x_led_blink_set(struct phy_device *phydev, u8 index,
-+				 unsigned long *delay_on,
-+				 unsigned long *delay_off)
-+{
-+	int ret;
-+	u16 reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-+
-+	/* Set blink to 50% off, 50% on at 4Hz by default */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
-+			     QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
-+			     QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
-+	if (ret)
-+		return ret;
-+
-+	/* We use BLINK_1 for normal blinking */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
-+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
-+	if (ret)
-+		return ret;
-+
-+	/* We set blink to 4Hz, aka 250ms */
-+	*delay_on = 250 / 2;
-+	*delay_off = 250 / 2;
-+
-+	return 0;
-+}
-+
-+static int qca808x_led_polarity_set(struct phy_device *phydev, int index,
-+				    unsigned long modes)
-+{
-+	struct qca808x_priv *priv = phydev->priv;
-+	bool active_low = false;
-+	u32 mode;
-+
-+	for_each_set_bit(mode, &modes, __PHY_LED_MODES_NUM) {
-+		switch (mode) {
-+		case PHY_LED_ACTIVE_LOW:
-+			active_low = true;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+	}
-+
-+	/* PHY polarity is global and can't be set per LED.
-+	 * To detect this, check if last requested polarity mode
-+	 * match the new one.
-+	 */
-+	if (priv->led_polarity_mode >= 0 &&
-+	    priv->led_polarity_mode != active_low) {
-+		phydev_err(phydev, "PHY polarity is global. Mismatched polarity on different LED\n");
-+		return -EINVAL;
-+	}
-+
-+	/* Save the last PHY polarity mode */
-+	priv->led_polarity_mode = active_low;
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN,
-+			      QCA808X_MMD7_LED_POLARITY_CTRL,
-+			      QCA808X_LED_ACTIVE_HIGH,
-+			      active_low ? 0 : QCA808X_LED_ACTIVE_HIGH);
-+}
-+
-+static struct phy_driver qca808x_driver[] = {
-+{
-+	/* Qualcomm QCA8081 */
-+	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
-+	.name			= "Qualcomm QCA8081",
-+	.flags			= PHY_POLL_CABLE_TEST,
-+	.probe			= qca808x_probe,
-+	.config_intr		= at803x_config_intr,
-+	.handle_interrupt	= at803x_handle_interrupt,
-+	.get_tunable		= at803x_get_tunable,
-+	.set_tunable		= at803x_set_tunable,
-+	.set_wol		= at803x_set_wol,
-+	.get_wol		= at803x_get_wol,
-+	.get_features		= qca808x_get_features,
-+	.config_aneg		= qca808x_config_aneg,
-+	.suspend		= genphy_suspend,
-+	.resume			= genphy_resume,
-+	.read_status		= qca808x_read_status,
-+	.config_init		= qca808x_config_init,
-+	.soft_reset		= qca808x_soft_reset,
-+	.cable_test_start	= qca808x_cable_test_start,
-+	.cable_test_get_status	= qca808x_cable_test_get_status,
-+	.link_change_notify	= qca808x_link_change_notify,
-+	.led_brightness_set	= qca808x_led_brightness_set,
-+	.led_blink_set		= qca808x_led_blink_set,
-+	.led_hw_is_supported	= qca808x_led_hw_is_supported,
-+	.led_hw_control_set	= qca808x_led_hw_control_set,
-+	.led_hw_control_get	= qca808x_led_hw_control_get,
-+	.led_polarity_set	= qca808x_led_polarity_set,
-+}, };
-+
-+module_phy_driver(qca808x_driver);
-+
-+static struct mdio_device_id __maybe_unused qca808x_tbl[] = {
-+	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(mdio, qca808x_tbl);
diff --git a/target/linux/generic/backport-6.1/714-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch b/target/linux/generic/backport-6.1/714-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch
deleted file mode 100644
index 80c870159ba8..000000000000
--- a/target/linux/generic/backport-6.1/714-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch
+++ /dev/null
@@ -1,394 +0,0 @@
-From 4765a9722e09765866e131ec31f7b9cf4c1f4854 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:57:50 +0000
-Subject: [PATCH] net: pcs: add driver for MediaTek SGMII PCS
-
-The SGMII core found in several MediaTek SoCs is identical to what can
-also be found in MediaTek's MT7531 Ethernet switch IC.
-As this has not always been clear, both drivers developed different
-implementations to deal with the PCS.
-Recently Alexander Couzens pointed out this fact which lead to the
-development of this shared driver.
-
-Add a dedicated driver, mostly by copying the code now found in the
-Ethernet driver. The now redundant code will be removed by a follow-up
-commit.
-
-Suggested-by: Alexander Couzens <lynxis@fe80.eu>
-Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- MAINTAINERS                       |   8 +
- drivers/net/pcs/Kconfig           |   7 +
- drivers/net/pcs/Makefile          |   1 +
- drivers/net/pcs/pcs-mtk-lynxi.c   | 305 ++++++++++++++++++++++++++++++
- include/linux/pcs/pcs-mtk-lynxi.h |  13 ++
- 5 files changed, 334 insertions(+)
- create mode 100644 drivers/net/pcs/pcs-mtk-lynxi.c
- create mode 100644 include/linux/pcs/pcs-mtk-lynxi.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -12935,6 +12935,14 @@ L:	netdev@vger.kernel.org
- S:	Maintained
- F:	drivers/net/ethernet/mediatek/
- 
-+MEDIATEK ETHERNET PCS DRIVER
-+M:	Alexander Couzens <lynxis@fe80.eu>
-+M:	Daniel Golle <daniel@makrotopia.org>
-+L:	netdev@vger.kernel.org
-+S:	Maintained
-+F:	drivers/net/pcs/pcs-mtk-lynxi.c
-+F:	include/linux/pcs/pcs-mtk-lynxi.h
-+
- MEDIATEK I2C CONTROLLER DRIVER
- M:	Qii Wang <qii.wang@mediatek.com>
- L:	linux-i2c@vger.kernel.org
---- a/drivers/net/pcs/Kconfig
-+++ b/drivers/net/pcs/Kconfig
-@@ -32,4 +32,11 @@ config PCS_ALTERA_TSE
- 	  This module provides helper functions for the Altera Triple Speed
- 	  Ethernet SGMII PCS, that can be found on the Intel Socfpga family.
- 
-+config PCS_MTK_LYNXI
-+	tristate
-+	select REGMAP
-+	help
-+	  This module provides helpers to phylink for managing the LynxI PCS
-+	  which is part of MediaTek's SoC and Ethernet switch ICs.
-+
- endmenu
---- a/drivers/net/pcs/Makefile
-+++ b/drivers/net/pcs/Makefile
-@@ -7,3 +7,4 @@ obj-$(CONFIG_PCS_XPCS)		+= pcs_xpcs.o
- obj-$(CONFIG_PCS_LYNX)		+= pcs-lynx.o
- obj-$(CONFIG_PCS_RZN1_MIIC)	+= pcs-rzn1-miic.o
- obj-$(CONFIG_PCS_ALTERA_TSE)	+= pcs-altera-tse.o
-+obj-$(CONFIG_PCS_MTK_LYNXI)	+= pcs-mtk-lynxi.o
---- /dev/null
-+++ b/drivers/net/pcs/pcs-mtk-lynxi.c
-@@ -0,0 +1,305 @@
-+// SPDX-License-Identifier: GPL-2.0
-+// Copyright (c) 2018-2019 MediaTek Inc.
-+/* A library for MediaTek SGMII circuit
-+ *
-+ * Author: Sean Wang <sean.wang@mediatek.com>
-+ * Author: Alexander Couzens <lynxis@fe80.eu>
-+ * Author: Daniel Golle <daniel@makrotopia.org>
-+ *
-+ */
-+
-+#include <linux/mdio.h>
-+#include <linux/of.h>
-+#include <linux/pcs/pcs-mtk-lynxi.h>
-+#include <linux/phylink.h>
-+#include <linux/regmap.h>
-+
-+/* SGMII subsystem config registers */
-+/* BMCR (low 16) BMSR (high 16) */
-+#define SGMSYS_PCS_CONTROL_1		0x0
-+#define SGMII_BMCR			GENMASK(15, 0)
-+#define SGMII_BMSR			GENMASK(31, 16)
-+
-+#define SGMSYS_PCS_DEVICE_ID		0x4
-+#define SGMII_LYNXI_DEV_ID		0x4d544950
-+
-+#define SGMSYS_PCS_ADVERTISE		0x8
-+#define SGMII_ADVERTISE			GENMASK(15, 0)
-+#define SGMII_LPA			GENMASK(31, 16)
-+
-+#define SGMSYS_PCS_SCRATCH		0x14
-+#define SGMII_DEV_VERSION		GENMASK(31, 16)
-+
-+/* Register to programmable link timer, the unit in 2 * 8ns */
-+#define SGMSYS_PCS_LINK_TIMER		0x18
-+#define SGMII_LINK_TIMER_MASK		GENMASK(19, 0)
-+#define SGMII_LINK_TIMER_VAL(ns)	FIELD_PREP(SGMII_LINK_TIMER_MASK, \
-+						   ((ns) / 2 / 8))
-+
-+/* Register to control remote fault */
-+#define SGMSYS_SGMII_MODE		0x20
-+#define SGMII_IF_MODE_SGMII		BIT(0)
-+#define SGMII_SPEED_DUPLEX_AN		BIT(1)
-+#define SGMII_SPEED_MASK		GENMASK(3, 2)
-+#define SGMII_SPEED_10			FIELD_PREP(SGMII_SPEED_MASK, 0)
-+#define SGMII_SPEED_100			FIELD_PREP(SGMII_SPEED_MASK, 1)
-+#define SGMII_SPEED_1000		FIELD_PREP(SGMII_SPEED_MASK, 2)
-+#define SGMII_DUPLEX_HALF		BIT(4)
-+#define SGMII_REMOTE_FAULT_DIS		BIT(8)
-+
-+/* Register to reset SGMII design */
-+#define SGMSYS_RESERVED_0		0x34
-+#define SGMII_SW_RESET			BIT(0)
-+
-+/* Register to set SGMII speed, ANA RG_ Control Signals III */
-+#define SGMII_PHY_SPEED_MASK		GENMASK(3, 2)
-+#define SGMII_PHY_SPEED_1_25G		FIELD_PREP(SGMII_PHY_SPEED_MASK, 0)
-+#define SGMII_PHY_SPEED_3_125G		FIELD_PREP(SGMII_PHY_SPEED_MASK, 1)
-+
-+/* Register to power up QPHY */
-+#define SGMSYS_QPHY_PWR_STATE_CTRL	0xe8
-+#define	SGMII_PHYA_PWD			BIT(4)
-+
-+/* Register to QPHY wrapper control */
-+#define SGMSYS_QPHY_WRAP_CTRL		0xec
-+#define SGMII_PN_SWAP_MASK		GENMASK(1, 0)
-+#define SGMII_PN_SWAP_TX_RX		(BIT(0) | BIT(1))
-+
-+/* struct mtk_pcs_lynxi -  This structure holds each sgmii regmap andassociated
-+ *                         data
-+ * @regmap:                The register map pointing at the range used to setup
-+ *                         SGMII modes
-+ * @dev:                   Pointer to device owning the PCS
-+ * @ana_rgc3:              The offset of register ANA_RGC3 relative to regmap
-+ * @interface:             Currently configured interface mode
-+ * @pcs:                   Phylink PCS structure
-+ * @flags:                 Flags indicating hardware properties
-+ */
-+struct mtk_pcs_lynxi {
-+	struct regmap		*regmap;
-+	u32			ana_rgc3;
-+	phy_interface_t		interface;
-+	struct			phylink_pcs pcs;
-+	u32			flags;
-+};
-+
-+static struct mtk_pcs_lynxi *pcs_to_mtk_pcs_lynxi(struct phylink_pcs *pcs)
-+{
-+	return container_of(pcs, struct mtk_pcs_lynxi, pcs);
-+}
-+
-+static void mtk_pcs_lynxi_get_state(struct phylink_pcs *pcs,
-+				    struct phylink_link_state *state)
-+{
-+	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
-+	unsigned int bm, adv;
-+
-+	/* Read the BMSR and LPA */
-+	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &bm);
-+	regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv);
-+
-+	phylink_mii_c22_pcs_decode_state(state, FIELD_GET(SGMII_BMSR, bm),
-+					 FIELD_GET(SGMII_LPA, adv));
-+}
-+
-+static int mtk_pcs_lynxi_config(struct phylink_pcs *pcs, unsigned int mode,
-+				phy_interface_t interface,
-+				const unsigned long *advertising,
-+				bool permit_pause_to_mac)
-+{
-+	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
-+	bool mode_changed = false, changed, use_an;
-+	unsigned int rgc3, sgm_mode, bmcr;
-+	int advertise, link_timer;
-+
-+	advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
-+							     advertising);
-+	if (advertise < 0)
-+		return advertise;
-+
-+	/* Clearing IF_MODE_BIT0 switches the PCS to BASE-X mode, and
-+	 * we assume that fixes it's speed at bitrate = line rate (in
-+	 * other words, 1000Mbps or 2500Mbps).
-+	 */
-+	if (interface == PHY_INTERFACE_MODE_SGMII) {
-+		sgm_mode = SGMII_IF_MODE_SGMII;
-+		if (phylink_autoneg_inband(mode)) {
-+			sgm_mode |= SGMII_REMOTE_FAULT_DIS |
-+				    SGMII_SPEED_DUPLEX_AN;
-+			use_an = true;
-+		} else {
-+			use_an = false;
-+		}
-+	} else if (phylink_autoneg_inband(mode)) {
-+		/* 1000base-X or 2500base-X autoneg */
-+		sgm_mode = SGMII_REMOTE_FAULT_DIS;
-+		use_an = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+					   advertising);
-+	} else {
-+		/* 1000base-X or 2500base-X without autoneg */
-+		sgm_mode = 0;
-+		use_an = false;
-+	}
-+
-+	if (use_an)
-+		bmcr = BMCR_ANENABLE;
-+	else
-+		bmcr = 0;
-+
-+	if (mpcs->interface != interface) {
-+		link_timer = phylink_get_link_timer_ns(interface);
-+		if (link_timer < 0)
-+			return link_timer;
-+
-+		/* PHYA power down */
-+		regmap_set_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
-+				SGMII_PHYA_PWD);
-+
-+		/* Reset SGMII PCS state */
-+		regmap_set_bits(mpcs->regmap, SGMSYS_RESERVED_0,
-+				SGMII_SW_RESET);
-+
-+		if (mpcs->flags & MTK_SGMII_FLAG_PN_SWAP)
-+			regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_WRAP_CTRL,
-+					   SGMII_PN_SWAP_MASK,
-+					   SGMII_PN_SWAP_TX_RX);
-+
-+		if (interface == PHY_INTERFACE_MODE_2500BASEX)
-+			rgc3 = SGMII_PHY_SPEED_3_125G;
-+		else
-+			rgc3 = SGMII_PHY_SPEED_1_25G;
-+
-+		/* Configure the underlying interface speed */
-+		regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
-+				   SGMII_PHY_SPEED_MASK, rgc3);
-+
-+		/* Setup the link timer */
-+		regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
-+			     SGMII_LINK_TIMER_VAL(link_timer));
-+
-+		mpcs->interface = interface;
-+		mode_changed = true;
-+	}
-+
-+	/* Update the advertisement, noting whether it has changed */
-+	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
-+				 SGMII_ADVERTISE, advertise, &changed);
-+
-+	/* Update the sgmsys mode register */
-+	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
-+			   SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN |
-+			   SGMII_IF_MODE_SGMII, sgm_mode);
-+
-+	/* Update the BMCR */
-+	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
-+			   BMCR_ANENABLE, bmcr);
-+
-+	/* Release PHYA power down state
-+	 * Only removing bit SGMII_PHYA_PWD isn't enough.
-+	 * There are cases when the SGMII_PHYA_PWD register contains 0x9 which
-+	 * prevents SGMII from working. The SGMII still shows link but no traffic
-+	 * can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
-+	 * taken from a good working state of the SGMII interface.
-+	 * Unknown how much the QPHY needs but it is racy without a sleep.
-+	 * Tested on mt7622 & mt7986.
-+	 */
-+	usleep_range(50, 100);
-+	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
-+
-+	return changed || mode_changed;
-+}
-+
-+static void mtk_pcs_lynxi_restart_an(struct phylink_pcs *pcs)
-+{
-+	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
-+
-+	regmap_set_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1, BMCR_ANRESTART);
-+}
-+
-+static void mtk_pcs_lynxi_link_up(struct phylink_pcs *pcs, unsigned int mode,
-+				  phy_interface_t interface, int speed,
-+				  int duplex)
-+{
-+	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
-+	unsigned int sgm_mode;
-+
-+	if (!phylink_autoneg_inband(mode)) {
-+		/* Force the speed and duplex setting */
-+		if (speed == SPEED_10)
-+			sgm_mode = SGMII_SPEED_10;
-+		else if (speed == SPEED_100)
-+			sgm_mode = SGMII_SPEED_100;
-+		else
-+			sgm_mode = SGMII_SPEED_1000;
-+
-+		if (duplex != DUPLEX_FULL)
-+			sgm_mode |= SGMII_DUPLEX_HALF;
-+
-+		regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
-+				   SGMII_DUPLEX_HALF | SGMII_SPEED_MASK,
-+				   sgm_mode);
-+	}
-+}
-+
-+static const struct phylink_pcs_ops mtk_pcs_lynxi_ops = {
-+	.pcs_get_state = mtk_pcs_lynxi_get_state,
-+	.pcs_config = mtk_pcs_lynxi_config,
-+	.pcs_an_restart = mtk_pcs_lynxi_restart_an,
-+	.pcs_link_up = mtk_pcs_lynxi_link_up,
-+};
-+
-+struct phylink_pcs *mtk_pcs_lynxi_create(struct device *dev,
-+					 struct regmap *regmap, u32 ana_rgc3,
-+					 u32 flags)
-+{
-+	struct mtk_pcs_lynxi *mpcs;
-+	u32 id, ver;
-+	int ret;
-+
-+	ret = regmap_read(regmap, SGMSYS_PCS_DEVICE_ID, &id);
-+	if (ret < 0)
-+		return NULL;
-+
-+	if (id != SGMII_LYNXI_DEV_ID) {
-+		dev_err(dev, "unknown PCS device id %08x\n", id);
-+		return NULL;
-+	}
-+
-+	ret = regmap_read(regmap, SGMSYS_PCS_SCRATCH, &ver);
-+	if (ret < 0)
-+		return NULL;
-+
-+	ver = FIELD_GET(SGMII_DEV_VERSION, ver);
-+	if (ver != 0x1) {
-+		dev_err(dev, "unknown PCS device version %04x\n", ver);
-+		return NULL;
-+	}
-+
-+	dev_dbg(dev, "MediaTek LynxI SGMII PCS (id 0x%08x, ver 0x%04x)\n", id,
-+		ver);
-+
-+	mpcs = kzalloc(sizeof(*mpcs), GFP_KERNEL);
-+	if (!mpcs)
-+		return NULL;
-+
-+	mpcs->ana_rgc3 = ana_rgc3;
-+	mpcs->regmap = regmap;
-+	mpcs->flags = flags;
-+	mpcs->pcs.ops = &mtk_pcs_lynxi_ops;
-+	mpcs->pcs.poll = true;
-+	mpcs->interface = PHY_INTERFACE_MODE_NA;
-+
-+	return &mpcs->pcs;
-+}
-+EXPORT_SYMBOL(mtk_pcs_lynxi_create);
-+
-+void mtk_pcs_lynxi_destroy(struct phylink_pcs *pcs)
-+{
-+	if (!pcs)
-+		return;
-+
-+	kfree(pcs_to_mtk_pcs_lynxi(pcs));
-+}
-+EXPORT_SYMBOL(mtk_pcs_lynxi_destroy);
-+
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/include/linux/pcs/pcs-mtk-lynxi.h
-@@ -0,0 +1,13 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef __LINUX_PCS_MTK_LYNXI_H
-+#define __LINUX_PCS_MTK_LYNXI_H
-+
-+#include <linux/phylink.h>
-+#include <linux/regmap.h>
-+
-+#define MTK_SGMII_FLAG_PN_SWAP BIT(0)
-+struct phylink_pcs *mtk_pcs_lynxi_create(struct device *dev,
-+					 struct regmap *regmap,
-+					 u32 ana_rgc3, u32 flags);
-+void mtk_pcs_lynxi_destroy(struct phylink_pcs *pcs);
-+#endif
diff --git a/target/linux/generic/backport-6.1/714-v6.8-01-net-phy-make-addr-type-u8-in-phy_package_shared-stru.patch b/target/linux/generic/backport-6.1/714-v6.8-01-net-phy-make-addr-type-u8-in-phy_package_shared-stru.patch
deleted file mode 100644
index 6decc3430b0d..000000000000
--- a/target/linux/generic/backport-6.1/714-v6.8-01-net-phy-make-addr-type-u8-in-phy_package_shared-stru.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From ebb30ccbbdbd6fae5177b676da4f4ac92bb4f635 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 15 Dec 2023 14:15:31 +0100
-Subject: [PATCH 1/4] net: phy: make addr type u8 in phy_package_shared struct
-
-Switch addr type in phy_package_shared struct to u8.
-
-The value is already checked to be non negative and to be less than
-PHY_MAX_ADDR, hence u8 is better suited than using int.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/linux/phy.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -330,7 +330,7 @@ struct mdio_bus_stats {
-  * phy_package_leave().
-  */
- struct phy_package_shared {
--	int addr;
-+	u8 addr;
- 	refcount_t refcnt;
- 	unsigned long flags;
- 	size_t priv_size;
diff --git a/target/linux/generic/backport-6.1/714-v6.8-02-net-phy-extend-PHY-package-API-to-support-multiple-g.patch b/target/linux/generic/backport-6.1/714-v6.8-02-net-phy-extend-PHY-package-API-to-support-multiple-g.patch
deleted file mode 100644
index 0cf01df3d35d..000000000000
--- a/target/linux/generic/backport-6.1/714-v6.8-02-net-phy-extend-PHY-package-API-to-support-multiple-g.patch
+++ /dev/null
@@ -1,341 +0,0 @@
-From 9eea577eb1155fe4a183bc5e7bf269b0b2e7a6ba Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 15 Dec 2023 14:15:32 +0100
-Subject: [PATCH 2/4] net: phy: extend PHY package API to support multiple
- global address
-
-Current API for PHY package are limited to single address to configure
-global settings for the PHY package.
-
-It was found that some PHY package (for example the qca807x, a PHY
-package that is shipped with a bundle of 5 PHY) requires multiple PHY
-address to configure global settings. An example scenario is a PHY that
-have a dedicated PHY for PSGMII/serdes calibrarion and have a specific
-PHY in the package where the global PHY mode is set and affects every
-other PHY in the package.
-
-Change the API in the following way:
-- Change phy_package_join() to take the base addr of the PHY package
-  instead of the global PHY addr.
-- Make __/phy_package_write/read() require an additional arg that
-  select what global PHY address to use by passing the offset from the
-  base addr passed on phy_package_join().
-
-Each user of this API is updated to follow this new implementation
-following a pattern where an enum is defined to declare the offset of the
-addr.
-
-We also drop the check if shared is defined as any user of the
-phy_package_read/write is expected to use phy_package_join first. Misuse
-of this will correctly trigger a kernel panic for NULL pointer
-exception.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/bcm54140.c       | 16 ++++++--
- drivers/net/phy/mscc/mscc.h      |  5 +++
- drivers/net/phy/mscc/mscc_main.c |  4 +-
- drivers/net/phy/phy_device.c     | 35 +++++++++--------
- include/linux/phy.h              | 64 +++++++++++++++++++++-----------
- 5 files changed, 80 insertions(+), 44 deletions(-)
-
---- a/drivers/net/phy/bcm54140.c
-+++ b/drivers/net/phy/bcm54140.c
-@@ -128,6 +128,10 @@
- #define BCM54140_DEFAULT_DOWNSHIFT 5
- #define BCM54140_MAX_DOWNSHIFT 9
- 
-+enum bcm54140_global_phy {
-+	BCM54140_BASE_ADDR = 0,
-+};
-+
- struct bcm54140_priv {
- 	int port;
- 	int base_addr;
-@@ -429,11 +433,13 @@ static int bcm54140_base_read_rdb(struct
- 	int ret;
- 
- 	phy_lock_mdio_bus(phydev);
--	ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
-+	ret = __phy_package_write(phydev, BCM54140_BASE_ADDR,
-+				  MII_BCM54XX_RDB_ADDR, rdb);
- 	if (ret < 0)
- 		goto out;
- 
--	ret = __phy_package_read(phydev, MII_BCM54XX_RDB_DATA);
-+	ret = __phy_package_read(phydev, BCM54140_BASE_ADDR,
-+				 MII_BCM54XX_RDB_DATA);
- 
- out:
- 	phy_unlock_mdio_bus(phydev);
-@@ -446,11 +452,13 @@ static int bcm54140_base_write_rdb(struc
- 	int ret;
- 
- 	phy_lock_mdio_bus(phydev);
--	ret = __phy_package_write(phydev, MII_BCM54XX_RDB_ADDR, rdb);
-+	ret = __phy_package_write(phydev, BCM54140_BASE_ADDR,
-+				  MII_BCM54XX_RDB_ADDR, rdb);
- 	if (ret < 0)
- 		goto out;
- 
--	ret = __phy_package_write(phydev, MII_BCM54XX_RDB_DATA, val);
-+	ret = __phy_package_write(phydev, BCM54140_BASE_ADDR,
-+				  MII_BCM54XX_RDB_DATA, val);
- 
- out:
- 	phy_unlock_mdio_bus(phydev);
---- a/drivers/net/phy/mscc/mscc.h
-+++ b/drivers/net/phy/mscc/mscc.h
-@@ -414,6 +414,11 @@ struct vsc8531_private {
-  * gpio_lock: used for PHC operations. Common for all PHYs as the load/save GPIO
-  * is shared.
-  */
-+
-+enum vsc85xx_global_phy {
-+	VSC88XX_BASE_ADDR = 0,
-+};
-+
- struct vsc85xx_shared_private {
- 	struct mutex gpio_lock;
- };
---- a/drivers/net/phy/mscc/mscc_main.c
-+++ b/drivers/net/phy/mscc/mscc_main.c
-@@ -700,7 +700,7 @@ int phy_base_write(struct phy_device *ph
- 		dump_stack();
- 	}
- 
--	return __phy_package_write(phydev, regnum, val);
-+	return __phy_package_write(phydev, VSC88XX_BASE_ADDR, regnum, val);
- }
- 
- /* phydev->bus->mdio_lock should be locked when using this function */
-@@ -711,7 +711,7 @@ int phy_base_read(struct phy_device *phy
- 		dump_stack();
- 	}
- 
--	return __phy_package_read(phydev, regnum);
-+	return __phy_package_read(phydev, VSC88XX_BASE_ADDR, regnum);
- }
- 
- u32 vsc85xx_csr_read(struct phy_device *phydev,
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1602,20 +1602,22 @@ EXPORT_SYMBOL_GPL(phy_driver_is_genphy_1
- /**
-  * phy_package_join - join a common PHY group
-  * @phydev: target phy_device struct
-- * @addr: cookie and PHY address for global register access
-+ * @base_addr: cookie and base PHY address of PHY package for offset
-+ *   calculation of global register access
-  * @priv_size: if non-zero allocate this amount of bytes for private data
-  *
-  * This joins a PHY group and provides a shared storage for all phydevs in
-  * this group. This is intended to be used for packages which contain
-  * more than one PHY, for example a quad PHY transceiver.
-  *
-- * The addr parameter serves as a cookie which has to have the same value
-- * for all members of one group and as a PHY address to access generic
-- * registers of a PHY package. Usually, one of the PHY addresses of the
-- * different PHYs in the package provides access to these global registers.
-+ * The base_addr parameter serves as cookie which has to have the same values
-+ * for all members of one group and as the base PHY address of the PHY package
-+ * for offset calculation to access generic registers of a PHY package.
-+ * Usually, one of the PHY addresses of the different PHYs in the package
-+ * provides access to these global registers.
-  * The address which is given here, will be used in the phy_package_read()
-- * and phy_package_write() convenience functions. If your PHY doesn't have
-- * global registers you can just pick any of the PHY addresses.
-+ * and phy_package_write() convenience functions as base and added to the
-+ * passed offset in those functions.
-  *
-  * This will set the shared pointer of the phydev to the shared storage.
-  * If this is the first call for a this cookie the shared storage will be
-@@ -1625,17 +1627,17 @@ EXPORT_SYMBOL_GPL(phy_driver_is_genphy_1
-  * Returns < 1 on error, 0 on success. Esp. calling phy_package_join()
-  * with the same cookie but a different priv_size is an error.
-  */
--int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size)
-+int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size)
- {
- 	struct mii_bus *bus = phydev->mdio.bus;
- 	struct phy_package_shared *shared;
- 	int ret;
- 
--	if (addr < 0 || addr >= PHY_MAX_ADDR)
-+	if (base_addr < 0 || base_addr >= PHY_MAX_ADDR)
- 		return -EINVAL;
- 
- 	mutex_lock(&bus->shared_lock);
--	shared = bus->shared[addr];
-+	shared = bus->shared[base_addr];
- 	if (!shared) {
- 		ret = -ENOMEM;
- 		shared = kzalloc(sizeof(*shared), GFP_KERNEL);
-@@ -1647,9 +1649,9 @@ int phy_package_join(struct phy_device *
- 				goto err_free;
- 			shared->priv_size = priv_size;
- 		}
--		shared->addr = addr;
-+		shared->base_addr = base_addr;
- 		refcount_set(&shared->refcnt, 1);
--		bus->shared[addr] = shared;
-+		bus->shared[base_addr] = shared;
- 	} else {
- 		ret = -EINVAL;
- 		if (priv_size && priv_size != shared->priv_size)
-@@ -1687,7 +1689,7 @@ void phy_package_leave(struct phy_device
- 		return;
- 
- 	if (refcount_dec_and_mutex_lock(&shared->refcnt, &bus->shared_lock)) {
--		bus->shared[shared->addr] = NULL;
-+		bus->shared[shared->base_addr] = NULL;
- 		mutex_unlock(&bus->shared_lock);
- 		kfree(shared->priv);
- 		kfree(shared);
-@@ -1706,7 +1708,8 @@ static void devm_phy_package_leave(struc
-  * devm_phy_package_join - resource managed phy_package_join()
-  * @dev: device that is registering this PHY package
-  * @phydev: target phy_device struct
-- * @addr: cookie and PHY address for global register access
-+ * @base_addr: cookie and base PHY address of PHY package for offset
-+ *   calculation of global register access
-  * @priv_size: if non-zero allocate this amount of bytes for private data
-  *
-  * Managed phy_package_join(). Shared storage fetched by this function,
-@@ -1714,7 +1717,7 @@ static void devm_phy_package_leave(struc
-  * phy_package_join() for more information.
-  */
- int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
--			  int addr, size_t priv_size)
-+			  int base_addr, size_t priv_size)
- {
- 	struct phy_device **ptr;
- 	int ret;
-@@ -1724,7 +1727,7 @@ int devm_phy_package_join(struct device
- 	if (!ptr)
- 		return -ENOMEM;
- 
--	ret = phy_package_join(phydev, addr, priv_size);
-+	ret = phy_package_join(phydev, base_addr, priv_size);
- 
- 	if (!ret) {
- 		*ptr = phydev;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -319,7 +319,8 @@ struct mdio_bus_stats {
- 
- /**
-  * struct phy_package_shared - Shared information in PHY packages
-- * @addr: Common PHY address used to combine PHYs in one package
-+ * @base_addr: Base PHY address of PHY package used to combine PHYs
-+ *   in one package and for offset calculation of phy_package_read/write
-  * @refcnt: Number of PHYs connected to this shared data
-  * @flags: Initialization of PHY package
-  * @priv_size: Size of the shared private data @priv
-@@ -330,7 +331,7 @@ struct mdio_bus_stats {
-  * phy_package_leave().
-  */
- struct phy_package_shared {
--	u8 addr;
-+	u8 base_addr;
- 	refcount_t refcnt;
- 	unsigned long flags;
- 	size_t priv_size;
-@@ -1763,10 +1764,10 @@ int phy_ethtool_get_link_ksettings(struc
- int phy_ethtool_set_link_ksettings(struct net_device *ndev,
- 				   const struct ethtool_link_ksettings *cmd);
- int phy_ethtool_nway_reset(struct net_device *ndev);
--int phy_package_join(struct phy_device *phydev, int addr, size_t priv_size);
-+int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size);
- void phy_package_leave(struct phy_device *phydev);
- int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
--			  int addr, size_t priv_size);
-+			  int base_addr, size_t priv_size);
- 
- #if IS_ENABLED(CONFIG_PHYLIB)
- int __init mdio_bus_init(void);
-@@ -1778,46 +1779,65 @@ int phy_ethtool_get_sset_count(struct ph
- int phy_ethtool_get_stats(struct phy_device *phydev,
- 			  struct ethtool_stats *stats, u64 *data);
- 
--static inline int phy_package_read(struct phy_device *phydev, u32 regnum)
-+static inline int phy_package_address(struct phy_device *phydev,
-+				      unsigned int addr_offset)
- {
- 	struct phy_package_shared *shared = phydev->shared;
-+	u8 base_addr = shared->base_addr;
- 
--	if (!shared)
-+	if (addr_offset >= PHY_MAX_ADDR - base_addr)
- 		return -EIO;
- 
--	return mdiobus_read(phydev->mdio.bus, shared->addr, regnum);
-+	/* we know that addr will be in the range 0..31 and thus the
-+	 * implicit cast to a signed int is not a problem.
-+	 */
-+	return base_addr + addr_offset;
- }
- 
--static inline int __phy_package_read(struct phy_device *phydev, u32 regnum)
-+static inline int phy_package_read(struct phy_device *phydev,
-+				   unsigned int addr_offset, u32 regnum)
- {
--	struct phy_package_shared *shared = phydev->shared;
-+	int addr = phy_package_address(phydev, addr_offset);
- 
--	if (!shared)
--		return -EIO;
-+	if (addr < 0)
-+		return addr;
-+
-+	return mdiobus_read(phydev->mdio.bus, addr, regnum);
-+}
-+
-+static inline int __phy_package_read(struct phy_device *phydev,
-+				     unsigned int addr_offset, u32 regnum)
-+{
-+	int addr = phy_package_address(phydev, addr_offset);
-+
-+	if (addr < 0)
-+		return addr;
- 
--	return __mdiobus_read(phydev->mdio.bus, shared->addr, regnum);
-+	return __mdiobus_read(phydev->mdio.bus, addr, regnum);
- }
- 
- static inline int phy_package_write(struct phy_device *phydev,
--				    u32 regnum, u16 val)
-+				    unsigned int addr_offset, u32 regnum,
-+				    u16 val)
- {
--	struct phy_package_shared *shared = phydev->shared;
-+	int addr = phy_package_address(phydev, addr_offset);
- 
--	if (!shared)
--		return -EIO;
-+	if (addr < 0)
-+		return addr;
- 
--	return mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
-+	return mdiobus_write(phydev->mdio.bus, addr, regnum, val);
- }
- 
- static inline int __phy_package_write(struct phy_device *phydev,
--				      u32 regnum, u16 val)
-+				      unsigned int addr_offset, u32 regnum,
-+				      u16 val)
- {
--	struct phy_package_shared *shared = phydev->shared;
-+	int addr = phy_package_address(phydev, addr_offset);
- 
--	if (!shared)
--		return -EIO;
-+	if (addr < 0)
-+		return addr;
- 
--	return __mdiobus_write(phydev->mdio.bus, shared->addr, regnum, val);
-+	return __mdiobus_write(phydev->mdio.bus, addr, regnum, val);
- }
- 
- static inline bool __phy_package_set_once(struct phy_device *phydev,
diff --git a/target/linux/generic/backport-6.1/714-v6.8-03-net-phy-restructure-__phy_write-read_mmd-to-helper-a.patch b/target/linux/generic/backport-6.1/714-v6.8-03-net-phy-restructure-__phy_write-read_mmd-to-helper-a.patch
deleted file mode 100644
index 4a17d4645344..000000000000
--- a/target/linux/generic/backport-6.1/714-v6.8-03-net-phy-restructure-__phy_write-read_mmd-to-helper-a.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From 028672bd1d73cf65249a420c1de75e8d2acd2f6a Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 15 Dec 2023 14:15:33 +0100
-Subject: [PATCH 3/4] net: phy: restructure __phy_write/read_mmd to helper and
- phydev user
-
-Restructure phy_write_mmd and phy_read_mmd to implement generic helper
-for direct mdiobus access for mmd and use these helper for phydev user.
-
-This is needed in preparation of PHY package API that requires generic
-access to the mdiobus and are deatched from phydev struct but instead
-access them based on PHY package base_addr and offsets.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy-core.c | 64 ++++++++++++++++++--------------------
- 1 file changed, 30 insertions(+), 34 deletions(-)
-
---- a/drivers/net/phy/phy-core.c
-+++ b/drivers/net/phy/phy-core.c
-@@ -528,6 +528,28 @@ static void mmd_phy_indirect(struct mii_
- 			devad | MII_MMD_CTRL_NOINCR);
- }
- 
-+static int mmd_phy_read(struct mii_bus *bus, int phy_addr, bool is_c45,
-+			int devad, u32 regnum)
-+{
-+	if (is_c45)
-+		return __mdiobus_c45_read(bus, phy_addr, devad, regnum);
-+
-+	mmd_phy_indirect(bus, phy_addr, devad, regnum);
-+	/* Read the content of the MMD's selected register */
-+	return __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
-+}
-+
-+static int mmd_phy_write(struct mii_bus *bus, int phy_addr, bool is_c45,
-+			 int devad, u32 regnum, u16 val)
-+{
-+	if (is_c45)
-+		return __mdiobus_c45_write(bus, phy_addr, devad, regnum, val);
-+
-+	mmd_phy_indirect(bus, phy_addr, devad, regnum);
-+	/* Write the data into MMD's selected register */
-+	return __mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
-+}
-+
- /**
-  * __phy_read_mmd - Convenience function for reading a register
-  * from an MMD on a given PHY.
-@@ -539,26 +561,14 @@ static void mmd_phy_indirect(struct mii_
-  */
- int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
- {
--	int val;
--
- 	if (regnum > (u16)~0 || devad > 32)
- 		return -EINVAL;
- 
--	if (phydev->drv && phydev->drv->read_mmd) {
--		val = phydev->drv->read_mmd(phydev, devad, regnum);
--	} else if (phydev->is_c45) {
--		val = __mdiobus_c45_read(phydev->mdio.bus, phydev->mdio.addr,
--					 devad, regnum);
--	} else {
--		struct mii_bus *bus = phydev->mdio.bus;
--		int phy_addr = phydev->mdio.addr;
--
--		mmd_phy_indirect(bus, phy_addr, devad, regnum);
--
--		/* Read the content of the MMD's selected register */
--		val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
--	}
--	return val;
-+	if (phydev->drv && phydev->drv->read_mmd)
-+		return phydev->drv->read_mmd(phydev, devad, regnum);
-+
-+	return mmd_phy_read(phydev->mdio.bus, phydev->mdio.addr,
-+			    phydev->is_c45, devad, regnum);
- }
- EXPORT_SYMBOL(__phy_read_mmd);
- 
-@@ -595,28 +605,14 @@ EXPORT_SYMBOL(phy_read_mmd);
-  */
- int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
- {
--	int ret;
--
- 	if (regnum > (u16)~0 || devad > 32)
- 		return -EINVAL;
- 
--	if (phydev->drv && phydev->drv->write_mmd) {
--		ret = phydev->drv->write_mmd(phydev, devad, regnum, val);
--	} else if (phydev->is_c45) {
--		ret = __mdiobus_c45_write(phydev->mdio.bus, phydev->mdio.addr,
--					  devad, regnum, val);
--	} else {
--		struct mii_bus *bus = phydev->mdio.bus;
--		int phy_addr = phydev->mdio.addr;
-+	if (phydev->drv && phydev->drv->write_mmd)
-+		return phydev->drv->write_mmd(phydev, devad, regnum, val);
- 
--		mmd_phy_indirect(bus, phy_addr, devad, regnum);
--
--		/* Write the data into MMD's selected register */
--		__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
--
--		ret = 0;
--	}
--	return ret;
-+	return mmd_phy_write(phydev->mdio.bus, phydev->mdio.addr,
-+			     phydev->is_c45, devad, regnum, val);
- }
- EXPORT_SYMBOL(__phy_write_mmd);
- 
diff --git a/target/linux/generic/backport-6.1/714-v6.8-04-net-phy-add-support-for-PHY-package-MMD-read-write.patch b/target/linux/generic/backport-6.1/714-v6.8-04-net-phy-add-support-for-PHY-package-MMD-read-write.patch
deleted file mode 100644
index a628a3792919..000000000000
--- a/target/linux/generic/backport-6.1/714-v6.8-04-net-phy-add-support-for-PHY-package-MMD-read-write.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-From d63710fc0f1a501fd75a7025e3070a96ffa1645f Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 15 Dec 2023 14:15:34 +0100
-Subject: [PATCH 4/4] net: phy: add support for PHY package MMD read/write
-
-Some PHY in PHY package may require to read/write MMD regs to correctly
-configure the PHY package.
-
-Add support for these additional required function in both lock and no
-lock variant.
-
-It's assumed that the entire PHY package is either C22 or C45. We use
-C22 or C45 way of writing/reading to mmd regs based on the passed phydev
-whether it's C22 or C45.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy-core.c | 140 +++++++++++++++++++++++++++++++++++++
- include/linux/phy.h        |  16 +++++
- 2 files changed, 156 insertions(+)
-
---- a/drivers/net/phy/phy-core.c
-+++ b/drivers/net/phy/phy-core.c
-@@ -639,6 +639,146 @@ int phy_write_mmd(struct phy_device *phy
- EXPORT_SYMBOL(phy_write_mmd);
- 
- /**
-+ * __phy_package_read_mmd - read MMD reg relative to PHY package base addr
-+ * @phydev: The phy_device struct
-+ * @addr_offset: The offset to be added to PHY package base_addr
-+ * @devad: The MMD to read from
-+ * @regnum: The register on the MMD to read
-+ *
-+ * Convenience helper for reading a register of an MMD on a given PHY
-+ * using the PHY package base address. The base address is added to
-+ * the addr_offset value.
-+ *
-+ * Same calling rules as for __phy_read();
-+ *
-+ * NOTE: It's assumed that the entire PHY package is either C22 or C45.
-+ */
-+int __phy_package_read_mmd(struct phy_device *phydev,
-+			   unsigned int addr_offset, int devad,
-+			   u32 regnum)
-+{
-+	int addr = phy_package_address(phydev, addr_offset);
-+
-+	if (addr < 0)
-+		return addr;
-+
-+	if (regnum > (u16)~0 || devad > 32)
-+		return -EINVAL;
-+
-+	return mmd_phy_read(phydev->mdio.bus, addr, phydev->is_c45, devad,
-+			    regnum);
-+}
-+EXPORT_SYMBOL(__phy_package_read_mmd);
-+
-+/**
-+ * phy_package_read_mmd - read MMD reg relative to PHY package base addr
-+ * @phydev: The phy_device struct
-+ * @addr_offset: The offset to be added to PHY package base_addr
-+ * @devad: The MMD to read from
-+ * @regnum: The register on the MMD to read
-+ *
-+ * Convenience helper for reading a register of an MMD on a given PHY
-+ * using the PHY package base address. The base address is added to
-+ * the addr_offset value.
-+ *
-+ * Same calling rules as for phy_read();
-+ *
-+ * NOTE: It's assumed that the entire PHY package is either C22 or C45.
-+ */
-+int phy_package_read_mmd(struct phy_device *phydev,
-+			 unsigned int addr_offset, int devad,
-+			 u32 regnum)
-+{
-+	int addr = phy_package_address(phydev, addr_offset);
-+	int val;
-+
-+	if (addr < 0)
-+		return addr;
-+
-+	if (regnum > (u16)~0 || devad > 32)
-+		return -EINVAL;
-+
-+	phy_lock_mdio_bus(phydev);
-+	val = mmd_phy_read(phydev->mdio.bus, addr, phydev->is_c45, devad,
-+			   regnum);
-+	phy_unlock_mdio_bus(phydev);
-+
-+	return val;
-+}
-+EXPORT_SYMBOL(phy_package_read_mmd);
-+
-+/**
-+ * __phy_package_write_mmd - write MMD reg relative to PHY package base addr
-+ * @phydev: The phy_device struct
-+ * @addr_offset: The offset to be added to PHY package base_addr
-+ * @devad: The MMD to write to
-+ * @regnum: The register on the MMD to write
-+ * @val: value to write to @regnum
-+ *
-+ * Convenience helper for writing a register of an MMD on a given PHY
-+ * using the PHY package base address. The base address is added to
-+ * the addr_offset value.
-+ *
-+ * Same calling rules as for __phy_write();
-+ *
-+ * NOTE: It's assumed that the entire PHY package is either C22 or C45.
-+ */
-+int __phy_package_write_mmd(struct phy_device *phydev,
-+			    unsigned int addr_offset, int devad,
-+			    u32 regnum, u16 val)
-+{
-+	int addr = phy_package_address(phydev, addr_offset);
-+
-+	if (addr < 0)
-+		return addr;
-+
-+	if (regnum > (u16)~0 || devad > 32)
-+		return -EINVAL;
-+
-+	return mmd_phy_write(phydev->mdio.bus, addr, phydev->is_c45, devad,
-+			     regnum, val);
-+}
-+EXPORT_SYMBOL(__phy_package_write_mmd);
-+
-+/**
-+ * phy_package_write_mmd - write MMD reg relative to PHY package base addr
-+ * @phydev: The phy_device struct
-+ * @addr_offset: The offset to be added to PHY package base_addr
-+ * @devad: The MMD to write to
-+ * @regnum: The register on the MMD to write
-+ * @val: value to write to @regnum
-+ *
-+ * Convenience helper for writing a register of an MMD on a given PHY
-+ * using the PHY package base address. The base address is added to
-+ * the addr_offset value.
-+ *
-+ * Same calling rules as for phy_write();
-+ *
-+ * NOTE: It's assumed that the entire PHY package is either C22 or C45.
-+ */
-+int phy_package_write_mmd(struct phy_device *phydev,
-+			  unsigned int addr_offset, int devad,
-+			  u32 regnum, u16 val)
-+{
-+	int addr = phy_package_address(phydev, addr_offset);
-+	int ret;
-+
-+	if (addr < 0)
-+		return addr;
-+
-+	if (regnum > (u16)~0 || devad > 32)
-+		return -EINVAL;
-+
-+	phy_lock_mdio_bus(phydev);
-+	ret = mmd_phy_write(phydev->mdio.bus, addr, phydev->is_c45, devad,
-+			    regnum, val);
-+	phy_unlock_mdio_bus(phydev);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL(phy_package_write_mmd);
-+
-+/**
-  * phy_modify_changed - Function for modifying a PHY register
-  * @phydev: the phy_device struct
-  * @regnum: register number to modify
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -1840,6 +1840,22 @@ static inline int __phy_package_write(st
- 	return __mdiobus_write(phydev->mdio.bus, addr, regnum, val);
- }
- 
-+int __phy_package_read_mmd(struct phy_device *phydev,
-+			   unsigned int addr_offset, int devad,
-+			   u32 regnum);
-+
-+int phy_package_read_mmd(struct phy_device *phydev,
-+			 unsigned int addr_offset, int devad,
-+			 u32 regnum);
-+
-+int __phy_package_write_mmd(struct phy_device *phydev,
-+			    unsigned int addr_offset, int devad,
-+			    u32 regnum, u16 val);
-+
-+int phy_package_write_mmd(struct phy_device *phydev,
-+			  unsigned int addr_offset, int devad,
-+			  u32 regnum, u16 val);
-+
- static inline bool __phy_package_set_once(struct phy_device *phydev,
- 					  unsigned int b)
- {
diff --git a/target/linux/generic/backport-6.1/715-01-v6.2-net-fman-memac-Add-serdes-support.patch b/target/linux/generic/backport-6.1/715-01-v6.2-net-fman-memac-Add-serdes-support.patch
deleted file mode 100644
index 2886123f2d8f..000000000000
--- a/target/linux/generic/backport-6.1/715-01-v6.2-net-fman-memac-Add-serdes-support.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From affa013f494486079c3c5ad2d00cebc41a3d7445 Mon Sep 17 00:00:00 2001
-From: Sean Anderson <sean.anderson@seco.com>
-Date: Mon, 17 Oct 2022 16:22:36 -0400
-Subject: [PATCH 01/21] net: fman: memac: Add serdes support
-
-This adds support for using a serdes which has to be configured. This is
-primarly in preparation for phylink conversion, which will then change the
-serdes mode dynamically.
-
-Signed-off-by: Sean Anderson <sean.anderson@seco.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../net/ethernet/freescale/fman/fman_memac.c  | 49 ++++++++++++++++++-
- 1 file changed, 47 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/fman/fman_memac.c
-+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
-@@ -13,6 +13,7 @@
- #include <linux/io.h>
- #include <linux/phy.h>
- #include <linux/phy_fixed.h>
-+#include <linux/phy/phy.h>
- #include <linux/of_mdio.h>
- 
- /* PCS registers */
-@@ -324,6 +325,7 @@ struct fman_mac {
- 	void *fm;
- 	struct fman_rev_info fm_rev_info;
- 	bool basex_if;
-+	struct phy *serdes;
- 	struct phy_device *pcsphy;
- 	bool allmulti_enabled;
- };
-@@ -1203,17 +1205,56 @@ int memac_initialization(struct mac_devi
- 		}
- 	}
- 
-+	memac->serdes = devm_of_phy_get(mac_dev->dev, mac_node, "serdes");
-+	err = PTR_ERR(memac->serdes);
-+	if (err == -ENODEV || err == -ENOSYS) {
-+		dev_dbg(mac_dev->dev, "could not get (optional) serdes\n");
-+		memac->serdes = NULL;
-+	} else if (IS_ERR(memac->serdes)) {
-+		dev_err_probe(mac_dev->dev, err, "could not get serdes\n");
-+		goto _return_fm_mac_free;
-+	} else {
-+		err = phy_init(memac->serdes);
-+		if (err) {
-+			dev_err_probe(mac_dev->dev, err,
-+				      "could not initialize serdes\n");
-+			goto _return_fm_mac_free;
-+		}
-+
-+		err = phy_power_on(memac->serdes);
-+		if (err) {
-+			dev_err_probe(mac_dev->dev, err,
-+				      "could not power on serdes\n");
-+			goto _return_phy_exit;
-+		}
-+
-+		if (memac->phy_if == PHY_INTERFACE_MODE_SGMII ||
-+		    memac->phy_if == PHY_INTERFACE_MODE_1000BASEX ||
-+		    memac->phy_if == PHY_INTERFACE_MODE_2500BASEX ||
-+		    memac->phy_if == PHY_INTERFACE_MODE_QSGMII ||
-+		    memac->phy_if == PHY_INTERFACE_MODE_XGMII) {
-+			err = phy_set_mode_ext(memac->serdes, PHY_MODE_ETHERNET,
-+					       memac->phy_if);
-+			if (err) {
-+				dev_err_probe(mac_dev->dev, err,
-+					      "could not set serdes mode to %s\n",
-+					      phy_modes(memac->phy_if));
-+				goto _return_phy_power_off;
-+			}
-+		}
-+	}
-+
- 	if (!mac_dev->phy_node && of_phy_is_fixed_link(mac_node)) {
- 		struct phy_device *phy;
- 
- 		err = of_phy_register_fixed_link(mac_node);
- 		if (err)
--			goto _return_fm_mac_free;
-+			goto _return_phy_power_off;
- 
- 		fixed_link = kzalloc(sizeof(*fixed_link), GFP_KERNEL);
- 		if (!fixed_link) {
- 			err = -ENOMEM;
--			goto _return_fm_mac_free;
-+			goto _return_phy_power_off;
- 		}
- 
- 		mac_dev->phy_node = of_node_get(mac_node);
-@@ -1242,6 +1283,10 @@ int memac_initialization(struct mac_devi
- 
- 	goto _return;
- 
-+_return_phy_power_off:
-+	phy_power_off(memac->serdes);
-+_return_phy_exit:
-+	phy_exit(memac->serdes);
- _return_fixed_link_free:
- 	kfree(fixed_link);
- _return_fm_mac_free:
diff --git a/target/linux/generic/backport-6.1/715-02-v6.2-net-fman-memac-Use-lynx-pcs-driver.patch b/target/linux/generic/backport-6.1/715-02-v6.2-net-fman-memac-Use-lynx-pcs-driver.patch
deleted file mode 100644
index 873debc0807e..000000000000
--- a/target/linux/generic/backport-6.1/715-02-v6.2-net-fman-memac-Use-lynx-pcs-driver.patch
+++ /dev/null
@@ -1,384 +0,0 @@
-From fe60e7154d3a35af975c5e6570d6ec31aab9a731 Mon Sep 17 00:00:00 2001
-From: Sean Anderson <sean.anderson@seco.com>
-Date: Mon, 17 Oct 2022 16:22:37 -0400
-Subject: [PATCH 02/21] net: fman: memac: Use lynx pcs driver
-
-Although not stated in the datasheet, as far as I can tell PCS for mEMACs
-is a "Lynx." By reusing the existing driver, we can remove the PCS
-management code from the memac driver. This requires calling some PCS
-functions manually which phylink would usually do for us, but we will let
-it do that soon.
-
-One problem is that we don't actually have a PCS for QSGMII. We pretend
-that each mEMAC's MDIO bus has four QSGMII PCSs, but this is not the case.
-Only the "base" mEMAC's MDIO bus has the four QSGMII PCSs. This is not an
-issue yet, because we never get the PCS state. However, it will be once the
-conversion to phylink is complete, since the links will appear to never
-come up. To get around this, we allow specifying multiple PCSs in pcsphy.
-This breaks backwards compatibility with old device trees, but only for
-QSGMII. IMO this is the only reasonable way to figure out what the actual
-QSGMII PCS is.
-
-Additionally, we now also support a separate XFI PCS. This can allow the
-SerDes driver to set different addresses for the SGMII and XFI PCSs so they
-can be accessed at the same time.
-
-Signed-off-by: Sean Anderson <sean.anderson@seco.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/freescale/fman/Kconfig   |   3 +
- .../net/ethernet/freescale/fman/fman_memac.c  | 258 +++++++-----------
- 2 files changed, 105 insertions(+), 156 deletions(-)
-
---- a/drivers/net/ethernet/freescale/fman/Kconfig
-+++ b/drivers/net/ethernet/freescale/fman/Kconfig
-@@ -4,6 +4,9 @@ config FSL_FMAN
- 	depends on FSL_SOC || ARCH_LAYERSCAPE || COMPILE_TEST
- 	select GENERIC_ALLOCATOR
- 	select PHYLIB
-+	select PHYLINK
-+	select PCS
-+	select PCS_LYNX
- 	select CRC32
- 	default n
- 	help
---- a/drivers/net/ethernet/freescale/fman/fman_memac.c
-+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
-@@ -11,43 +11,12 @@
- 
- #include <linux/slab.h>
- #include <linux/io.h>
-+#include <linux/pcs-lynx.h>
- #include <linux/phy.h>
- #include <linux/phy_fixed.h>
- #include <linux/phy/phy.h>
- #include <linux/of_mdio.h>
- 
--/* PCS registers */
--#define MDIO_SGMII_CR			0x00
--#define MDIO_SGMII_DEV_ABIL_SGMII	0x04
--#define MDIO_SGMII_LINK_TMR_L		0x12
--#define MDIO_SGMII_LINK_TMR_H		0x13
--#define MDIO_SGMII_IF_MODE		0x14
--
--/* SGMII Control defines */
--#define SGMII_CR_AN_EN			0x1000
--#define SGMII_CR_RESTART_AN		0x0200
--#define SGMII_CR_FD			0x0100
--#define SGMII_CR_SPEED_SEL1_1G		0x0040
--#define SGMII_CR_DEF_VAL		(SGMII_CR_AN_EN | SGMII_CR_FD | \
--					 SGMII_CR_SPEED_SEL1_1G)
--
--/* SGMII Device Ability for SGMII defines */
--#define MDIO_SGMII_DEV_ABIL_SGMII_MODE	0x4001
--#define MDIO_SGMII_DEV_ABIL_BASEX_MODE	0x01A0
--
--/* Link timer define */
--#define LINK_TMR_L			0xa120
--#define LINK_TMR_H			0x0007
--#define LINK_TMR_L_BASEX		0xaf08
--#define LINK_TMR_H_BASEX		0x002f
--
--/* SGMII IF Mode defines */
--#define IF_MODE_USE_SGMII_AN		0x0002
--#define IF_MODE_SGMII_EN		0x0001
--#define IF_MODE_SGMII_SPEED_100M	0x0004
--#define IF_MODE_SGMII_SPEED_1G		0x0008
--#define IF_MODE_SGMII_DUPLEX_HALF	0x0010
--
- /* Num of additional exact match MAC adr regs */
- #define MEMAC_NUM_OF_PADDRS 7
- 
-@@ -326,7 +295,9 @@ struct fman_mac {
- 	struct fman_rev_info fm_rev_info;
- 	bool basex_if;
- 	struct phy *serdes;
--	struct phy_device *pcsphy;
-+	struct phylink_pcs *sgmii_pcs;
-+	struct phylink_pcs *qsgmii_pcs;
-+	struct phylink_pcs *xfi_pcs;
- 	bool allmulti_enabled;
- };
- 
-@@ -487,91 +458,22 @@ static u32 get_mac_addr_hash_code(u64 et
- 	return xor_val;
- }
- 
--static void setup_sgmii_internal_phy(struct fman_mac *memac,
--				     struct fixed_phy_status *fixed_link)
--{
--	u16 tmp_reg16;
--
--	if (WARN_ON(!memac->pcsphy))
--		return;
--
--	/* SGMII mode */
--	tmp_reg16 = IF_MODE_SGMII_EN;
--	if (!fixed_link)
--		/* AN enable */
--		tmp_reg16 |= IF_MODE_USE_SGMII_AN;
--	else {
--		switch (fixed_link->speed) {
--		case 10:
--			/* For 10M: IF_MODE[SPEED_10M] = 0 */
--		break;
--		case 100:
--			tmp_reg16 |= IF_MODE_SGMII_SPEED_100M;
--		break;
--		case 1000:
--		default:
--			tmp_reg16 |= IF_MODE_SGMII_SPEED_1G;
--		break;
--		}
--		if (!fixed_link->duplex)
--			tmp_reg16 |= IF_MODE_SGMII_DUPLEX_HALF;
--	}
--	phy_write(memac->pcsphy, MDIO_SGMII_IF_MODE, tmp_reg16);
--
--	/* Device ability according to SGMII specification */
--	tmp_reg16 = MDIO_SGMII_DEV_ABIL_SGMII_MODE;
--	phy_write(memac->pcsphy, MDIO_SGMII_DEV_ABIL_SGMII, tmp_reg16);
--
--	/* Adjust link timer for SGMII  -
--	 * According to Cisco SGMII specification the timer should be 1.6 ms.
--	 * The link_timer register is configured in units of the clock.
--	 * - When running as 1G SGMII, Serdes clock is 125 MHz, so
--	 * unit = 1 / (125*10^6 Hz) = 8 ns.
--	 * 1.6 ms in units of 8 ns = 1.6ms / 8ns = 2*10^5 = 0x30d40
--	 * - When running as 2.5G SGMII, Serdes clock is 312.5 MHz, so
--	 * unit = 1 / (312.5*10^6 Hz) = 3.2 ns.
--	 * 1.6 ms in units of 3.2 ns = 1.6ms / 3.2ns = 5*10^5 = 0x7a120.
--	 * Since link_timer value of 1G SGMII will be too short for 2.5 SGMII,
--	 * we always set up here a value of 2.5 SGMII.
--	 */
--	phy_write(memac->pcsphy, MDIO_SGMII_LINK_TMR_H, LINK_TMR_H);
--	phy_write(memac->pcsphy, MDIO_SGMII_LINK_TMR_L, LINK_TMR_L);
--
--	if (!fixed_link)
--		/* Restart AN */
--		tmp_reg16 = SGMII_CR_DEF_VAL | SGMII_CR_RESTART_AN;
-+static void setup_sgmii_internal(struct fman_mac *memac,
-+				 struct phylink_pcs *pcs,
-+				 struct fixed_phy_status *fixed_link)
-+{
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
-+	phy_interface_t iface = memac->basex_if ? PHY_INTERFACE_MODE_1000BASEX :
-+				PHY_INTERFACE_MODE_SGMII;
-+	unsigned int mode = fixed_link ? MLO_AN_FIXED : MLO_AN_INBAND;
-+
-+	linkmode_set_pause(advertising, true, true);
-+	pcs->ops->pcs_config(pcs, mode, iface, advertising, true);
-+	if (fixed_link)
-+		pcs->ops->pcs_link_up(pcs, mode, iface, fixed_link->speed,
-+				      fixed_link->duplex);
- 	else
--		/* AN disabled */
--		tmp_reg16 = SGMII_CR_DEF_VAL & ~SGMII_CR_AN_EN;
--	phy_write(memac->pcsphy, 0x0, tmp_reg16);
--}
--
--static void setup_sgmii_internal_phy_base_x(struct fman_mac *memac)
--{
--	u16 tmp_reg16;
--
--	/* AN Device capability  */
--	tmp_reg16 = MDIO_SGMII_DEV_ABIL_BASEX_MODE;
--	phy_write(memac->pcsphy, MDIO_SGMII_DEV_ABIL_SGMII, tmp_reg16);
--
--	/* Adjust link timer for SGMII  -
--	 * For Serdes 1000BaseX auto-negotiation the timer should be 10 ms.
--	 * The link_timer register is configured in units of the clock.
--	 * - When running as 1G SGMII, Serdes clock is 125 MHz, so
--	 * unit = 1 / (125*10^6 Hz) = 8 ns.
--	 * 10 ms in units of 8 ns = 10ms / 8ns = 1250000 = 0x1312d0
--	 * - When running as 2.5G SGMII, Serdes clock is 312.5 MHz, so
--	 * unit = 1 / (312.5*10^6 Hz) = 3.2 ns.
--	 * 10 ms in units of 3.2 ns = 10ms / 3.2ns = 3125000 = 0x2faf08.
--	 * Since link_timer value of 1G SGMII will be too short for 2.5 SGMII,
--	 * we always set up here a value of 2.5 SGMII.
--	 */
--	phy_write(memac->pcsphy, MDIO_SGMII_LINK_TMR_H, LINK_TMR_H_BASEX);
--	phy_write(memac->pcsphy, MDIO_SGMII_LINK_TMR_L, LINK_TMR_L_BASEX);
--
--	/* Restart AN */
--	tmp_reg16 = SGMII_CR_DEF_VAL | SGMII_CR_RESTART_AN;
--	phy_write(memac->pcsphy, 0x0, tmp_reg16);
-+		pcs->ops->pcs_an_restart(pcs);
- }
- 
- static int check_init_parameters(struct fman_mac *memac)
-@@ -983,7 +885,6 @@ static int memac_set_exception(struct fm
- static int memac_init(struct fman_mac *memac)
- {
- 	struct memac_cfg *memac_drv_param;
--	u8 i;
- 	enet_addr_t eth_addr;
- 	bool slow_10g_if = false;
- 	struct fixed_phy_status *fixed_link = NULL;
-@@ -1036,32 +937,10 @@ static int memac_init(struct fman_mac *m
- 		iowrite32be(reg32, &memac->regs->command_config);
- 	}
- 
--	if (memac->phy_if == PHY_INTERFACE_MODE_SGMII) {
--		/* Configure internal SGMII PHY */
--		if (memac->basex_if)
--			setup_sgmii_internal_phy_base_x(memac);
--		else
--			setup_sgmii_internal_phy(memac, fixed_link);
--	} else if (memac->phy_if == PHY_INTERFACE_MODE_QSGMII) {
--		/* Configure 4 internal SGMII PHYs */
--		for (i = 0; i < 4; i++) {
--			u8 qsmgii_phy_addr, phy_addr;
--			/* QSGMII PHY address occupies 3 upper bits of 5-bit
--			 * phy_address; the lower 2 bits are used to extend
--			 * register address space and access each one of 4
--			 * ports inside QSGMII.
--			 */
--			phy_addr = memac->pcsphy->mdio.addr;
--			qsmgii_phy_addr = (u8)((phy_addr << 2) | i);
--			memac->pcsphy->mdio.addr = qsmgii_phy_addr;
--			if (memac->basex_if)
--				setup_sgmii_internal_phy_base_x(memac);
--			else
--				setup_sgmii_internal_phy(memac, fixed_link);
--
--			memac->pcsphy->mdio.addr = phy_addr;
--		}
--	}
-+	if (memac->phy_if == PHY_INTERFACE_MODE_SGMII)
-+		setup_sgmii_internal(memac, memac->sgmii_pcs, fixed_link);
-+	else if (memac->phy_if == PHY_INTERFACE_MODE_QSGMII)
-+		setup_sgmii_internal(memac, memac->qsgmii_pcs, fixed_link);
- 
- 	/* Max Frame Length */
- 	err = fman_set_mac_max_frame(memac->fm, memac->mac_id,
-@@ -1097,12 +976,25 @@ static int memac_init(struct fman_mac *m
- 	return 0;
- }
- 
-+static void pcs_put(struct phylink_pcs *pcs)
-+{
-+	struct mdio_device *mdiodev;
-+
-+	if (IS_ERR_OR_NULL(pcs))
-+		return;
-+
-+	mdiodev = lynx_get_mdio_device(pcs);
-+	lynx_pcs_destroy(pcs);
-+	mdio_device_free(mdiodev);
-+}
-+
- static int memac_free(struct fman_mac *memac)
- {
- 	free_init_resources(memac);
- 
--	if (memac->pcsphy)
--		put_device(&memac->pcsphy->mdio.dev);
-+	pcs_put(memac->sgmii_pcs);
-+	pcs_put(memac->qsgmii_pcs);
-+	pcs_put(memac->xfi_pcs);
- 
- 	kfree(memac->memac_drv_param);
- 	kfree(memac);
-@@ -1153,12 +1045,31 @@ static struct fman_mac *memac_config(str
- 	return memac;
- }
- 
-+static struct phylink_pcs *memac_pcs_create(struct device_node *mac_node,
-+					    int index)
-+{
-+	struct device_node *node;
-+	struct mdio_device *mdiodev = NULL;
-+	struct phylink_pcs *pcs;
-+
-+	node = of_parse_phandle(mac_node, "pcsphy-handle", index);
-+	if (node && of_device_is_available(node))
-+		mdiodev = of_mdio_find_device(node);
-+	of_node_put(node);
-+
-+	if (!mdiodev)
-+		return ERR_PTR(-EPROBE_DEFER);
-+
-+	pcs = lynx_pcs_create(mdiodev);
-+	return pcs;
-+}
-+
- int memac_initialization(struct mac_device *mac_dev,
- 			 struct device_node *mac_node,
- 			 struct fman_mac_params *params)
- {
- 	int			 err;
--	struct device_node	*phy_node;
-+	struct phylink_pcs	*pcs;
- 	struct fixed_phy_status *fixed_link;
- 	struct fman_mac		*memac;
- 
-@@ -1188,23 +1099,58 @@ int memac_initialization(struct mac_devi
- 	memac = mac_dev->fman_mac;
- 	memac->memac_drv_param->max_frame_length = fman_get_max_frm();
- 	memac->memac_drv_param->reset_on_init = true;
--	if (memac->phy_if == PHY_INTERFACE_MODE_SGMII ||
--	    memac->phy_if == PHY_INTERFACE_MODE_QSGMII) {
--		phy_node = of_parse_phandle(mac_node, "pcsphy-handle", 0);
--		if (!phy_node) {
--			pr_err("PCS PHY node is not available\n");
--			err = -EINVAL;
-+
-+	err = of_property_match_string(mac_node, "pcs-handle-names", "xfi");
-+	if (err >= 0) {
-+		memac->xfi_pcs = memac_pcs_create(mac_node, err);
-+		if (IS_ERR(memac->xfi_pcs)) {
-+			err = PTR_ERR(memac->xfi_pcs);
-+			dev_err_probe(mac_dev->dev, err, "missing xfi pcs\n");
- 			goto _return_fm_mac_free;
- 		}
-+	} else if (err != -EINVAL && err != -ENODATA) {
-+		goto _return_fm_mac_free;
-+	}
- 
--		memac->pcsphy = of_phy_find_device(phy_node);
--		if (!memac->pcsphy) {
--			pr_err("of_phy_find_device (PCS PHY) failed\n");
--			err = -EINVAL;
-+	err = of_property_match_string(mac_node, "pcs-handle-names", "qsgmii");
-+	if (err >= 0) {
-+		memac->qsgmii_pcs = memac_pcs_create(mac_node, err);
-+		if (IS_ERR(memac->qsgmii_pcs)) {
-+			err = PTR_ERR(memac->qsgmii_pcs);
-+			dev_err_probe(mac_dev->dev, err,
-+				      "missing qsgmii pcs\n");
- 			goto _return_fm_mac_free;
- 		}
-+	} else if (err != -EINVAL && err != -ENODATA) {
-+		goto _return_fm_mac_free;
-+	}
-+
-+	/* For compatibility, if pcs-handle-names is missing, we assume this
-+	 * phy is the first one in pcsphy-handle
-+	 */
-+	err = of_property_match_string(mac_node, "pcs-handle-names", "sgmii");
-+	if (err == -EINVAL || err == -ENODATA)
-+		pcs = memac_pcs_create(mac_node, 0);
-+	else if (err < 0)
-+		goto _return_fm_mac_free;
-+	else
-+		pcs = memac_pcs_create(mac_node, err);
-+
-+	if (!pcs) {
-+		dev_err(mac_dev->dev, "missing pcs\n");
-+		err = -ENOENT;
-+		goto _return_fm_mac_free;
- 	}
- 
-+	/* If err is set here, it means that pcs-handle-names was missing above
-+	 * (and therefore that xfi_pcs cannot be set). If we are defaulting to
-+	 * XGMII, assume this is for XFI. Otherwise, assume it is for SGMII.
-+	 */
-+	if (err && mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
-+		memac->xfi_pcs = pcs;
-+	else
-+		memac->sgmii_pcs = pcs;
-+
- 	memac->serdes = devm_of_phy_get(mac_dev->dev, mac_node, "serdes");
- 	err = PTR_ERR(memac->serdes);
- 	if (err == -ENODEV || err == -ENOSYS) {
diff --git a/target/linux/generic/backport-6.1/715-03-v6.2-net-dpaa-Convert-to-phylink.patch b/target/linux/generic/backport-6.1/715-03-v6.2-net-dpaa-Convert-to-phylink.patch
deleted file mode 100644
index 63b651bb2dd3..000000000000
--- a/target/linux/generic/backport-6.1/715-03-v6.2-net-dpaa-Convert-to-phylink.patch
+++ /dev/null
@@ -1,2451 +0,0 @@
-From 38e50fc3d43882a43115b4f1ca3eb88255163c5b Mon Sep 17 00:00:00 2001
-From: Sean Anderson <sean.anderson@seco.com>
-Date: Mon, 17 Oct 2022 16:22:38 -0400
-Subject: [PATCH 03/21] net: dpaa: Convert to phylink
-
-This converts DPAA to phylink. All macs are converted. This should work
-with no device tree modifications (including those made in this series),
-except for QSGMII (as noted previously).
-
-The mEMAC configuration is one of the tricker areas. I have tried to
-capture all the restrictions across the various models. Most of the time,
-we assume that if the serdes supports a mode or the phy-interface-mode
-specifies it, then we support it. The only place we can't do this is
-(RG)MII, since there's no serdes. In that case, we rely on a (new)
-devicetree property. There are also several cases where half-duplex is
-broken. Unfortunately, only a single compatible is used for the MAC, so we
-have to use the board compatible instead.
-
-The 10GEC conversion is very straightforward, since it only supports XAUI.
-There is generally nothing to configure.
-
-The dTSEC conversion is broadly similar to mEMAC, but is simpler because we
-don't support configuring the SerDes (though this can be easily added) and
-we don't have multiple PCSs. From what I can tell, there's nothing
-different in the driver or documentation between SGMII and 1000BASE-X
-except for the advertising. Similarly, I couldn't find anything about
-2500BASE-X. In both cases, I treat them like SGMII. These modes aren't used
-by any in-tree boards. Similarly, despite being mentioned in the driver, I
-couldn't find any documented SoCs which supported QSGMII.  I have left it
-unimplemented for now.
-
-Signed-off-by: Sean Anderson <sean.anderson@seco.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/freescale/dpaa/Kconfig   |   4 +-
- .../net/ethernet/freescale/dpaa/dpaa_eth.c    |  89 +--
- .../ethernet/freescale/dpaa/dpaa_ethtool.c    |  90 +--
- drivers/net/ethernet/freescale/fman/Kconfig   |   1 -
- .../net/ethernet/freescale/fman/fman_dtsec.c  | 458 +++++++--------
- .../net/ethernet/freescale/fman/fman_mac.h    |  10 -
- .../net/ethernet/freescale/fman/fman_memac.c  | 547 +++++++++---------
- .../net/ethernet/freescale/fman/fman_tgec.c   | 131 ++---
- drivers/net/ethernet/freescale/fman/mac.c     | 168 +-----
- drivers/net/ethernet/freescale/fman/mac.h     |  23 +-
- 10 files changed, 612 insertions(+), 909 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa/Kconfig
-+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
-@@ -2,8 +2,8 @@
- menuconfig FSL_DPAA_ETH
- 	tristate "DPAA Ethernet"
- 	depends on FSL_DPAA && FSL_FMAN
--	select PHYLIB
--	select FIXED_PHY
-+	select PHYLINK
-+	select PCS_LYNX
- 	help
- 	  Data Path Acceleration Architecture Ethernet driver,
- 	  supporting the Freescale QorIQ chips.
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
-@@ -264,8 +264,19 @@ static int dpaa_netdev_init(struct net_d
- 	net_dev->needed_headroom = priv->tx_headroom;
- 	net_dev->watchdog_timeo = msecs_to_jiffies(tx_timeout);
- 
--	mac_dev->net_dev = net_dev;
-+	/* The rest of the config is filled in by the mac device already */
-+	mac_dev->phylink_config.dev = &net_dev->dev;
-+	mac_dev->phylink_config.type = PHYLINK_NETDEV;
- 	mac_dev->update_speed = dpaa_eth_cgr_set_speed;
-+	mac_dev->phylink = phylink_create(&mac_dev->phylink_config,
-+					  dev_fwnode(mac_dev->dev),
-+					  mac_dev->phy_if,
-+					  mac_dev->phylink_ops);
-+	if (IS_ERR(mac_dev->phylink)) {
-+		err = PTR_ERR(mac_dev->phylink);
-+		dev_err_probe(dev, err, "Could not create phylink\n");
-+		return err;
-+	}
- 
- 	/* start without the RUNNING flag, phylib controls it later */
- 	netif_carrier_off(net_dev);
-@@ -273,6 +284,7 @@ static int dpaa_netdev_init(struct net_d
- 	err = register_netdev(net_dev);
- 	if (err < 0) {
- 		dev_err(dev, "register_netdev() = %d\n", err);
-+		phylink_destroy(mac_dev->phylink);
- 		return err;
- 	}
- 
-@@ -295,8 +307,7 @@ static int dpaa_stop(struct net_device *
- 	 */
- 	msleep(200);
- 
--	if (mac_dev->phy_dev)
--		phy_stop(mac_dev->phy_dev);
-+	phylink_stop(mac_dev->phylink);
- 	mac_dev->disable(mac_dev->fman_mac);
- 
- 	for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
-@@ -305,8 +316,7 @@ static int dpaa_stop(struct net_device *
- 			err = error;
- 	}
- 
--	if (net_dev->phydev)
--		phy_disconnect(net_dev->phydev);
-+	phylink_disconnect_phy(mac_dev->phylink);
- 	net_dev->phydev = NULL;
- 
- 	msleep(200);
-@@ -834,10 +844,10 @@ static int dpaa_eth_cgr_init(struct dpaa
- 
- 	/* Set different thresholds based on the configured MAC speed.
- 	 * This may turn suboptimal if the MAC is reconfigured at another
--	 * speed, so MACs must call dpaa_eth_cgr_set_speed in their adjust_link
-+	 * speed, so MACs must call dpaa_eth_cgr_set_speed in their link_up
- 	 * callback.
- 	 */
--	if (priv->mac_dev->if_support & SUPPORTED_10000baseT_Full)
-+	if (priv->mac_dev->phylink_config.mac_capabilities & MAC_10000FD)
- 		cs_th = DPAA_CS_THRESHOLD_10G;
- 	else
- 		cs_th = DPAA_CS_THRESHOLD_1G;
-@@ -866,7 +876,7 @@ out_error:
- 
- static void dpaa_eth_cgr_set_speed(struct mac_device *mac_dev, int speed)
- {
--	struct net_device *net_dev = mac_dev->net_dev;
-+	struct net_device *net_dev = to_net_dev(mac_dev->phylink_config.dev);
- 	struct dpaa_priv *priv = netdev_priv(net_dev);
- 	struct qm_mcc_initcgr opts = { };
- 	u32 cs_th;
-@@ -2905,58 +2915,6 @@ static void dpaa_eth_napi_disable(struct
- 	}
- }
- 
--static void dpaa_adjust_link(struct net_device *net_dev)
--{
--	struct mac_device *mac_dev;
--	struct dpaa_priv *priv;
--
--	priv = netdev_priv(net_dev);
--	mac_dev = priv->mac_dev;
--	mac_dev->adjust_link(mac_dev);
--}
--
--/* The Aquantia PHYs are capable of performing rate adaptation */
--#define PHY_VEND_AQUANTIA	0x03a1b400
--#define PHY_VEND_AQUANTIA2	0x31c31c00
--
--static int dpaa_phy_init(struct net_device *net_dev)
--{
--	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
--	struct mac_device *mac_dev;
--	struct phy_device *phy_dev;
--	struct dpaa_priv *priv;
--	u32 phy_vendor;
--
--	priv = netdev_priv(net_dev);
--	mac_dev = priv->mac_dev;
--
--	phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
--				 &dpaa_adjust_link, 0,
--				 mac_dev->phy_if);
--	if (!phy_dev) {
--		netif_err(priv, ifup, net_dev, "init_phy() failed\n");
--		return -ENODEV;
--	}
--
--	phy_vendor = phy_dev->drv->phy_id & GENMASK(31, 10);
--	/* Unless the PHY is capable of rate adaptation */
--	if (mac_dev->phy_if != PHY_INTERFACE_MODE_XGMII ||
--	    (phy_vendor != PHY_VEND_AQUANTIA &&
--	     phy_vendor != PHY_VEND_AQUANTIA2)) {
--		/* remove any features not supported by the controller */
--		ethtool_convert_legacy_u32_to_link_mode(mask,
--							mac_dev->if_support);
--		linkmode_and(phy_dev->supported, phy_dev->supported, mask);
--	}
--
--	phy_support_asym_pause(phy_dev);
--
--	mac_dev->phy_dev = phy_dev;
--	net_dev->phydev = phy_dev;
--
--	return 0;
--}
--
- static int dpaa_open(struct net_device *net_dev)
- {
- 	struct mac_device *mac_dev;
-@@ -2967,7 +2925,8 @@ static int dpaa_open(struct net_device *
- 	mac_dev = priv->mac_dev;
- 	dpaa_eth_napi_enable(priv);
- 
--	err = dpaa_phy_init(net_dev);
-+	err = phylink_of_phy_connect(mac_dev->phylink,
-+				     mac_dev->dev->of_node, 0);
- 	if (err)
- 		goto phy_init_failed;
- 
-@@ -2982,7 +2941,7 @@ static int dpaa_open(struct net_device *
- 		netif_err(priv, ifup, net_dev, "mac_dev->enable() = %d\n", err);
- 		goto mac_start_failed;
- 	}
--	phy_start(priv->mac_dev->phy_dev);
-+	phylink_start(mac_dev->phylink);
- 
- 	netif_tx_start_all_queues(net_dev);
- 
-@@ -2991,6 +2950,7 @@ static int dpaa_open(struct net_device *
- mac_start_failed:
- 	for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++)
- 		fman_port_disable(mac_dev->port[i]);
-+	phylink_disconnect_phy(mac_dev->phylink);
- 
- phy_init_failed:
- 	dpaa_eth_napi_disable(priv);
-@@ -3146,10 +3106,12 @@ static int dpaa_ts_ioctl(struct net_devi
- static int dpaa_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd)
- {
- 	int ret = -EINVAL;
-+	struct dpaa_priv *priv = netdev_priv(net_dev);
- 
- 	if (cmd == SIOCGMIIREG) {
- 		if (net_dev->phydev)
--			return phy_mii_ioctl(net_dev->phydev, rq, cmd);
-+			return phylink_mii_ioctl(priv->mac_dev->phylink, rq,
-+						 cmd);
- 	}
- 
- 	if (cmd == SIOCSHWTSTAMP)
-@@ -3552,6 +3514,7 @@ static int dpaa_remove(struct platform_d
- 
- 	dev_set_drvdata(dev, NULL);
- 	unregister_netdev(net_dev);
-+	phylink_destroy(priv->mac_dev->phylink);
- 
- 	err = dpaa_fq_free(dev, &priv->dpaa_fq_list);
- 
---- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
-@@ -54,27 +54,19 @@ static char dpaa_stats_global[][ETH_GSTR
- static int dpaa_get_link_ksettings(struct net_device *net_dev,
- 				   struct ethtool_link_ksettings *cmd)
- {
--	if (!net_dev->phydev)
--		return 0;
-+	struct dpaa_priv *priv = netdev_priv(net_dev);
-+	struct mac_device *mac_dev = priv->mac_dev;
- 
--	phy_ethtool_ksettings_get(net_dev->phydev, cmd);
--
--	return 0;
-+	return phylink_ethtool_ksettings_get(mac_dev->phylink, cmd);
- }
- 
- static int dpaa_set_link_ksettings(struct net_device *net_dev,
- 				   const struct ethtool_link_ksettings *cmd)
- {
--	int err;
--
--	if (!net_dev->phydev)
--		return -ENODEV;
-+	struct dpaa_priv *priv = netdev_priv(net_dev);
-+	struct mac_device *mac_dev = priv->mac_dev;
- 
--	err = phy_ethtool_ksettings_set(net_dev->phydev, cmd);
--	if (err < 0)
--		netdev_err(net_dev, "phy_ethtool_ksettings_set() = %d\n", err);
--
--	return err;
-+	return phylink_ethtool_ksettings_set(mac_dev->phylink, cmd);
- }
- 
- static void dpaa_get_drvinfo(struct net_device *net_dev,
-@@ -99,80 +91,28 @@ static void dpaa_set_msglevel(struct net
- 
- static int dpaa_nway_reset(struct net_device *net_dev)
- {
--	int err;
--
--	if (!net_dev->phydev)
--		return -ENODEV;
-+	struct dpaa_priv *priv = netdev_priv(net_dev);
-+	struct mac_device *mac_dev = priv->mac_dev;
- 
--	err = 0;
--	if (net_dev->phydev->autoneg) {
--		err = phy_start_aneg(net_dev->phydev);
--		if (err < 0)
--			netdev_err(net_dev, "phy_start_aneg() = %d\n",
--				   err);
--	}
--
--	return err;
-+	return phylink_ethtool_nway_reset(mac_dev->phylink);
- }
- 
- static void dpaa_get_pauseparam(struct net_device *net_dev,
- 				struct ethtool_pauseparam *epause)
- {
--	struct mac_device *mac_dev;
--	struct dpaa_priv *priv;
--
--	priv = netdev_priv(net_dev);
--	mac_dev = priv->mac_dev;
--
--	if (!net_dev->phydev)
--		return;
-+	struct dpaa_priv *priv = netdev_priv(net_dev);
-+	struct mac_device *mac_dev = priv->mac_dev;
- 
--	epause->autoneg = mac_dev->autoneg_pause;
--	epause->rx_pause = mac_dev->rx_pause_active;
--	epause->tx_pause = mac_dev->tx_pause_active;
-+	phylink_ethtool_get_pauseparam(mac_dev->phylink, epause);
- }
- 
- static int dpaa_set_pauseparam(struct net_device *net_dev,
- 			       struct ethtool_pauseparam *epause)
- {
--	struct mac_device *mac_dev;
--	struct phy_device *phydev;
--	bool rx_pause, tx_pause;
--	struct dpaa_priv *priv;
--	int err;
--
--	priv = netdev_priv(net_dev);
--	mac_dev = priv->mac_dev;
--
--	phydev = net_dev->phydev;
--	if (!phydev) {
--		netdev_err(net_dev, "phy device not initialized\n");
--		return -ENODEV;
--	}
--
--	if (!phy_validate_pause(phydev, epause))
--		return -EINVAL;
--
--	/* The MAC should know how to handle PAUSE frame autonegotiation before
--	 * adjust_link is triggered by a forced renegotiation of sym/asym PAUSE
--	 * settings.
--	 */
--	mac_dev->autoneg_pause = !!epause->autoneg;
--	mac_dev->rx_pause_req = !!epause->rx_pause;
--	mac_dev->tx_pause_req = !!epause->tx_pause;
--
--	/* Determine the sym/asym advertised PAUSE capabilities from the desired
--	 * rx/tx pause settings.
--	 */
--
--	phy_set_asym_pause(phydev, epause->rx_pause, epause->tx_pause);
--
--	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
--	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
--	if (err < 0)
--		netdev_err(net_dev, "set_mac_active_pause() = %d\n", err);
-+	struct dpaa_priv *priv = netdev_priv(net_dev);
-+	struct mac_device *mac_dev = priv->mac_dev;
- 
--	return err;
-+	return phylink_ethtool_set_pauseparam(mac_dev->phylink, epause);
- }
- 
- static int dpaa_get_sset_count(struct net_device *net_dev, int type)
---- a/drivers/net/ethernet/freescale/fman/Kconfig
-+++ b/drivers/net/ethernet/freescale/fman/Kconfig
-@@ -3,7 +3,6 @@ config FSL_FMAN
- 	tristate "FMan support"
- 	depends on FSL_SOC || ARCH_LAYERSCAPE || COMPILE_TEST
- 	select GENERIC_ALLOCATOR
--	select PHYLIB
- 	select PHYLINK
- 	select PCS
- 	select PCS_LYNX
---- a/drivers/net/ethernet/freescale/fman/fman_dtsec.c
-+++ b/drivers/net/ethernet/freescale/fman/fman_dtsec.c
-@@ -17,6 +17,7 @@
- #include <linux/crc32.h>
- #include <linux/of_mdio.h>
- #include <linux/mii.h>
-+#include <linux/netdevice.h>
- 
- /* TBI register addresses */
- #define MII_TBICON		0x11
-@@ -29,9 +30,6 @@
- #define TBICON_CLK_SELECT	0x0020	/* Clock select */
- #define TBICON_MI_MODE		0x0010	/* GMII mode (TBI if not set) */
- 
--#define TBIANA_SGMII		0x4001
--#define TBIANA_1000X		0x01a0
--
- /* Interrupt Mask Register (IMASK) */
- #define DTSEC_IMASK_BREN	0x80000000
- #define DTSEC_IMASK_RXCEN	0x40000000
-@@ -92,9 +90,10 @@
- 
- #define DTSEC_ECNTRL_GMIIM		0x00000040
- #define DTSEC_ECNTRL_TBIM		0x00000020
--#define DTSEC_ECNTRL_SGMIIM		0x00000002
- #define DTSEC_ECNTRL_RPM		0x00000010
- #define DTSEC_ECNTRL_R100M		0x00000008
-+#define DTSEC_ECNTRL_RMM		0x00000004
-+#define DTSEC_ECNTRL_SGMIIM		0x00000002
- #define DTSEC_ECNTRL_QSGMIIM		0x00000001
- 
- #define TCTRL_TTSE			0x00000040
-@@ -318,7 +317,8 @@ struct fman_mac {
- 	void *fm;
- 	struct fman_rev_info fm_rev_info;
- 	bool basex_if;
--	struct phy_device *tbiphy;
-+	struct mdio_device *tbidev;
-+	struct phylink_pcs pcs;
- };
- 
- static void set_dflts(struct dtsec_cfg *cfg)
-@@ -356,56 +356,14 @@ static int init(struct dtsec_regs __iome
- 		phy_interface_t iface, u16 iface_speed, u64 addr,
- 		u32 exception_mask, u8 tbi_addr)
- {
--	bool is_rgmii, is_sgmii, is_qsgmii;
- 	enet_addr_t eth_addr;
--	u32 tmp;
-+	u32 tmp = 0;
- 	int i;
- 
- 	/* Soft reset */
- 	iowrite32be(MACCFG1_SOFT_RESET, &regs->maccfg1);
- 	iowrite32be(0, &regs->maccfg1);
- 
--	/* dtsec_id2 */
--	tmp = ioread32be(&regs->tsec_id2);
--
--	/* check RGMII support */
--	if (iface == PHY_INTERFACE_MODE_RGMII ||
--	    iface == PHY_INTERFACE_MODE_RGMII_ID ||
--	    iface == PHY_INTERFACE_MODE_RGMII_RXID ||
--	    iface == PHY_INTERFACE_MODE_RGMII_TXID ||
--	    iface == PHY_INTERFACE_MODE_RMII)
--		if (tmp & DTSEC_ID2_INT_REDUCED_OFF)
--			return -EINVAL;
--
--	if (iface == PHY_INTERFACE_MODE_SGMII ||
--	    iface == PHY_INTERFACE_MODE_MII)
--		if (tmp & DTSEC_ID2_INT_REDUCED_OFF)
--			return -EINVAL;
--
--	is_rgmii = iface == PHY_INTERFACE_MODE_RGMII ||
--		   iface == PHY_INTERFACE_MODE_RGMII_ID ||
--		   iface == PHY_INTERFACE_MODE_RGMII_RXID ||
--		   iface == PHY_INTERFACE_MODE_RGMII_TXID;
--	is_sgmii = iface == PHY_INTERFACE_MODE_SGMII;
--	is_qsgmii = iface == PHY_INTERFACE_MODE_QSGMII;
--
--	tmp = 0;
--	if (is_rgmii || iface == PHY_INTERFACE_MODE_GMII)
--		tmp |= DTSEC_ECNTRL_GMIIM;
--	if (is_sgmii)
--		tmp |= (DTSEC_ECNTRL_SGMIIM | DTSEC_ECNTRL_TBIM);
--	if (is_qsgmii)
--		tmp |= (DTSEC_ECNTRL_SGMIIM | DTSEC_ECNTRL_TBIM |
--			DTSEC_ECNTRL_QSGMIIM);
--	if (is_rgmii)
--		tmp |= DTSEC_ECNTRL_RPM;
--	if (iface_speed == SPEED_100)
--		tmp |= DTSEC_ECNTRL_R100M;
--
--	iowrite32be(tmp, &regs->ecntrl);
--
--	tmp = 0;
--
- 	if (cfg->tx_pause_time)
- 		tmp |= cfg->tx_pause_time;
- 	if (cfg->tx_pause_time_extd)
-@@ -446,17 +404,10 @@ static int init(struct dtsec_regs __iome
- 
- 	tmp = 0;
- 
--	if (iface_speed < SPEED_1000)
--		tmp |= MACCFG2_NIBBLE_MODE;
--	else if (iface_speed == SPEED_1000)
--		tmp |= MACCFG2_BYTE_MODE;
--
- 	tmp |= (cfg->preamble_len << MACCFG2_PREAMBLE_LENGTH_SHIFT) &
- 		MACCFG2_PREAMBLE_LENGTH_MASK;
- 	if (cfg->tx_pad_crc)
- 		tmp |= MACCFG2_PAD_CRC_EN;
--	/* Full Duplex */
--	tmp |= MACCFG2_FULL_DUPLEX;
- 	iowrite32be(tmp, &regs->maccfg2);
- 
- 	tmp = (((cfg->non_back_to_back_ipg1 <<
-@@ -525,10 +476,6 @@ static void set_bucket(struct dtsec_regs
- 
- static int check_init_parameters(struct fman_mac *dtsec)
- {
--	if (dtsec->max_speed >= SPEED_10000) {
--		pr_err("1G MAC driver supports 1G or lower speeds\n");
--		return -EINVAL;
--	}
- 	if ((dtsec->dtsec_drv_param)->rx_prepend >
- 	    MAX_PACKET_ALIGNMENT) {
- 		pr_err("packetAlignmentPadding can't be > than %d\n",
-@@ -630,22 +577,10 @@ static int get_exception_flag(enum fman_
- 	return bit_mask;
- }
- 
--static bool is_init_done(struct dtsec_cfg *dtsec_drv_params)
--{
--	/* Checks if dTSEC driver parameters were initialized */
--	if (!dtsec_drv_params)
--		return true;
--
--	return false;
--}
--
- static u16 dtsec_get_max_frame_length(struct fman_mac *dtsec)
- {
- 	struct dtsec_regs __iomem *regs = dtsec->regs;
- 
--	if (is_init_done(dtsec->dtsec_drv_param))
--		return 0;
--
- 	return (u16)ioread32be(&regs->maxfrm);
- }
- 
-@@ -682,6 +617,7 @@ static void dtsec_isr(void *handle)
- 		dtsec->exception_cb(dtsec->dev_id, FM_MAC_EX_1G_COL_RET_LMT);
- 	if (event & DTSEC_IMASK_XFUNEN) {
- 		/* FM_TX_LOCKUP_ERRATA_DTSEC6 Errata workaround */
-+		/* FIXME: This races with the rest of the driver! */
- 		if (dtsec->fm_rev_info.major == 2) {
- 			u32 tpkt1, tmp_reg1, tpkt2, tmp_reg2, i;
- 			/* a. Write 0x00E0_0C00 to DTSEC_ID
-@@ -814,6 +750,43 @@ static void free_init_resources(struct f
- 	dtsec->unicast_addr_hash = NULL;
- }
- 
-+static struct fman_mac *pcs_to_dtsec(struct phylink_pcs *pcs)
-+{
-+	return container_of(pcs, struct fman_mac, pcs);
-+}
-+
-+static void dtsec_pcs_get_state(struct phylink_pcs *pcs,
-+				struct phylink_link_state *state)
-+{
-+	struct fman_mac *dtsec = pcs_to_dtsec(pcs);
-+
-+	phylink_mii_c22_pcs_get_state(dtsec->tbidev, state);
-+}
-+
-+static int dtsec_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-+			    phy_interface_t interface,
-+			    const unsigned long *advertising,
-+			    bool permit_pause_to_mac)
-+{
-+	struct fman_mac *dtsec = pcs_to_dtsec(pcs);
-+
-+	return phylink_mii_c22_pcs_config(dtsec->tbidev, mode, interface,
-+					  advertising);
-+}
-+
-+static void dtsec_pcs_an_restart(struct phylink_pcs *pcs)
-+{
-+	struct fman_mac *dtsec = pcs_to_dtsec(pcs);
-+
-+	phylink_mii_c22_pcs_an_restart(dtsec->tbidev);
-+}
-+
-+static const struct phylink_pcs_ops dtsec_pcs_ops = {
-+	.pcs_get_state = dtsec_pcs_get_state,
-+	.pcs_config = dtsec_pcs_config,
-+	.pcs_an_restart = dtsec_pcs_an_restart,
-+};
-+
- static void graceful_start(struct fman_mac *dtsec)
- {
- 	struct dtsec_regs __iomem *regs = dtsec->regs;
-@@ -854,36 +827,11 @@ static void graceful_stop(struct fman_ma
- 
- static int dtsec_enable(struct fman_mac *dtsec)
- {
--	struct dtsec_regs __iomem *regs = dtsec->regs;
--	u32 tmp;
--
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
--	/* Enable */
--	tmp = ioread32be(&regs->maccfg1);
--	tmp |= MACCFG1_RX_EN | MACCFG1_TX_EN;
--	iowrite32be(tmp, &regs->maccfg1);
--
--	/* Graceful start - clear the graceful Rx/Tx stop bit */
--	graceful_start(dtsec);
--
- 	return 0;
- }
- 
- static void dtsec_disable(struct fman_mac *dtsec)
- {
--	struct dtsec_regs __iomem *regs = dtsec->regs;
--	u32 tmp;
--
--	WARN_ON_ONCE(!is_init_done(dtsec->dtsec_drv_param));
--
--	/* Graceful stop - Assert the graceful Rx/Tx stop bit */
--	graceful_stop(dtsec);
--
--	tmp = ioread32be(&regs->maccfg1);
--	tmp &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
--	iowrite32be(tmp, &regs->maccfg1);
- }
- 
- static int dtsec_set_tx_pause_frames(struct fman_mac *dtsec,
-@@ -894,11 +842,6 @@ static int dtsec_set_tx_pause_frames(str
- 	struct dtsec_regs __iomem *regs = dtsec->regs;
- 	u32 ptv = 0;
- 
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
--	graceful_stop(dtsec);
--
- 	if (pause_time) {
- 		/* FM_BAD_TX_TS_IN_B_2_B_ERRATA_DTSEC_A003 Errata workaround */
- 		if (dtsec->fm_rev_info.major == 2 && pause_time <= 320) {
-@@ -919,8 +862,6 @@ static int dtsec_set_tx_pause_frames(str
- 		iowrite32be(ioread32be(&regs->maccfg1) & ~MACCFG1_TX_FLOW,
- 			    &regs->maccfg1);
- 
--	graceful_start(dtsec);
--
- 	return 0;
- }
- 
-@@ -929,11 +870,6 @@ static int dtsec_accept_rx_pause_frames(
- 	struct dtsec_regs __iomem *regs = dtsec->regs;
- 	u32 tmp;
- 
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
--	graceful_stop(dtsec);
--
- 	tmp = ioread32be(&regs->maccfg1);
- 	if (en)
- 		tmp |= MACCFG1_RX_FLOW;
-@@ -941,17 +877,125 @@ static int dtsec_accept_rx_pause_frames(
- 		tmp &= ~MACCFG1_RX_FLOW;
- 	iowrite32be(tmp, &regs->maccfg1);
- 
-+	return 0;
-+}
-+
-+static struct phylink_pcs *dtsec_select_pcs(struct phylink_config *config,
-+					    phy_interface_t iface)
-+{
-+	struct fman_mac *dtsec = fman_config_to_mac(config)->fman_mac;
-+
-+	switch (iface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+		return &dtsec->pcs;
-+	default:
-+		return NULL;
-+	}
-+}
-+
-+static void dtsec_mac_config(struct phylink_config *config, unsigned int mode,
-+			     const struct phylink_link_state *state)
-+{
-+	struct mac_device *mac_dev = fman_config_to_mac(config);
-+	struct dtsec_regs __iomem *regs = mac_dev->fman_mac->regs;
-+	u32 tmp;
-+
-+	switch (state->interface) {
-+	case PHY_INTERFACE_MODE_RMII:
-+		tmp = DTSEC_ECNTRL_RMM;
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII:
-+	case PHY_INTERFACE_MODE_RGMII_ID:
-+	case PHY_INTERFACE_MODE_RGMII_RXID:
-+	case PHY_INTERFACE_MODE_RGMII_TXID:
-+		tmp = DTSEC_ECNTRL_GMIIM | DTSEC_ECNTRL_RPM;
-+		break;
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+		tmp = DTSEC_ECNTRL_TBIM | DTSEC_ECNTRL_SGMIIM;
-+		break;
-+	default:
-+		dev_warn(mac_dev->dev, "cannot configure dTSEC for %s\n",
-+			 phy_modes(state->interface));
-+		return;
-+	}
-+
-+	iowrite32be(tmp, &regs->ecntrl);
-+}
-+
-+static void dtsec_link_up(struct phylink_config *config, struct phy_device *phy,
-+			  unsigned int mode, phy_interface_t interface,
-+			  int speed, int duplex, bool tx_pause, bool rx_pause)
-+{
-+	struct mac_device *mac_dev = fman_config_to_mac(config);
-+	struct fman_mac *dtsec = mac_dev->fman_mac;
-+	struct dtsec_regs __iomem *regs = dtsec->regs;
-+	u16 pause_time = tx_pause ? FSL_FM_PAUSE_TIME_ENABLE :
-+			 FSL_FM_PAUSE_TIME_DISABLE;
-+	u32 tmp;
-+
-+	dtsec_set_tx_pause_frames(dtsec, 0, pause_time, 0);
-+	dtsec_accept_rx_pause_frames(dtsec, rx_pause);
-+
-+	tmp = ioread32be(&regs->ecntrl);
-+	if (speed == SPEED_100)
-+		tmp |= DTSEC_ECNTRL_R100M;
-+	else
-+		tmp &= ~DTSEC_ECNTRL_R100M;
-+	iowrite32be(tmp, &regs->ecntrl);
-+
-+	tmp = ioread32be(&regs->maccfg2);
-+	tmp &= ~(MACCFG2_NIBBLE_MODE | MACCFG2_BYTE_MODE | MACCFG2_FULL_DUPLEX);
-+	if (speed >= SPEED_1000)
-+		tmp |= MACCFG2_BYTE_MODE;
-+	else
-+		tmp |= MACCFG2_NIBBLE_MODE;
-+
-+	if (duplex == DUPLEX_FULL)
-+		tmp |= MACCFG2_FULL_DUPLEX;
-+
-+	iowrite32be(tmp, &regs->maccfg2);
-+
-+	mac_dev->update_speed(mac_dev, speed);
-+
-+	/* Enable */
-+	tmp = ioread32be(&regs->maccfg1);
-+	tmp |= MACCFG1_RX_EN | MACCFG1_TX_EN;
-+	iowrite32be(tmp, &regs->maccfg1);
-+
-+	/* Graceful start - clear the graceful Rx/Tx stop bit */
- 	graceful_start(dtsec);
-+}
- 
--	return 0;
-+static void dtsec_link_down(struct phylink_config *config, unsigned int mode,
-+			    phy_interface_t interface)
-+{
-+	struct fman_mac *dtsec = fman_config_to_mac(config)->fman_mac;
-+	struct dtsec_regs __iomem *regs = dtsec->regs;
-+	u32 tmp;
-+
-+	/* Graceful stop - Assert the graceful Rx/Tx stop bit */
-+	graceful_stop(dtsec);
-+
-+	tmp = ioread32be(&regs->maccfg1);
-+	tmp &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
-+	iowrite32be(tmp, &regs->maccfg1);
- }
- 
-+static const struct phylink_mac_ops dtsec_mac_ops = {
-+	.validate = phylink_generic_validate,
-+	.mac_select_pcs = dtsec_select_pcs,
-+	.mac_config = dtsec_mac_config,
-+	.mac_link_up = dtsec_link_up,
-+	.mac_link_down = dtsec_link_down,
-+};
-+
- static int dtsec_modify_mac_address(struct fman_mac *dtsec,
- 				    const enet_addr_t *enet_addr)
- {
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
- 	graceful_stop(dtsec);
- 
- 	/* Initialize MAC Station Address registers (1 & 2)
-@@ -975,9 +1019,6 @@ static int dtsec_add_hash_mac_address(st
- 	u32 crc = 0xFFFFFFFF;
- 	bool mcast, ghtx;
- 
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
- 	addr = ENET_ADDR_TO_UINT64(*eth_addr);
- 
- 	ghtx = (bool)((ioread32be(&regs->rctrl) & RCTRL_GHTX) ? true : false);
-@@ -1037,9 +1078,6 @@ static int dtsec_set_allmulti(struct fma
- 	u32 tmp;
- 	struct dtsec_regs __iomem *regs = dtsec->regs;
- 
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
- 	tmp = ioread32be(&regs->rctrl);
- 	if (enable)
- 		tmp |= RCTRL_MPROM;
-@@ -1056,9 +1094,6 @@ static int dtsec_set_tstamp(struct fman_
- 	struct dtsec_regs __iomem *regs = dtsec->regs;
- 	u32 rctrl, tctrl;
- 
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
- 	rctrl = ioread32be(&regs->rctrl);
- 	tctrl = ioread32be(&regs->tctrl);
- 
-@@ -1087,9 +1122,6 @@ static int dtsec_del_hash_mac_address(st
- 	u32 crc = 0xFFFFFFFF;
- 	bool mcast, ghtx;
- 
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
- 	addr = ENET_ADDR_TO_UINT64(*eth_addr);
- 
- 	ghtx = (bool)((ioread32be(&regs->rctrl) & RCTRL_GHTX) ? true : false);
-@@ -1153,9 +1185,6 @@ static int dtsec_set_promiscuous(struct
- 	struct dtsec_regs __iomem *regs = dtsec->regs;
- 	u32 tmp;
- 
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
- 	/* Set unicast promiscuous */
- 	tmp = ioread32be(&regs->rctrl);
- 	if (new_val)
-@@ -1177,90 +1206,12 @@ static int dtsec_set_promiscuous(struct
- 	return 0;
- }
- 
--static int dtsec_adjust_link(struct fman_mac *dtsec, u16 speed)
--{
--	struct dtsec_regs __iomem *regs = dtsec->regs;
--	u32 tmp;
--
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
--	graceful_stop(dtsec);
--
--	tmp = ioread32be(&regs->maccfg2);
--
--	/* Full Duplex */
--	tmp |= MACCFG2_FULL_DUPLEX;
--
--	tmp &= ~(MACCFG2_NIBBLE_MODE | MACCFG2_BYTE_MODE);
--	if (speed < SPEED_1000)
--		tmp |= MACCFG2_NIBBLE_MODE;
--	else if (speed == SPEED_1000)
--		tmp |= MACCFG2_BYTE_MODE;
--	iowrite32be(tmp, &regs->maccfg2);
--
--	tmp = ioread32be(&regs->ecntrl);
--	if (speed == SPEED_100)
--		tmp |= DTSEC_ECNTRL_R100M;
--	else
--		tmp &= ~DTSEC_ECNTRL_R100M;
--	iowrite32be(tmp, &regs->ecntrl);
--
--	graceful_start(dtsec);
--
--	return 0;
--}
--
--static int dtsec_restart_autoneg(struct fman_mac *dtsec)
--{
--	u16 tmp_reg16;
--
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
--	tmp_reg16 = phy_read(dtsec->tbiphy, MII_BMCR);
--
--	tmp_reg16 &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
--	tmp_reg16 |= (BMCR_ANENABLE | BMCR_ANRESTART |
--		      BMCR_FULLDPLX | BMCR_SPEED1000);
--
--	phy_write(dtsec->tbiphy, MII_BMCR, tmp_reg16);
--
--	return 0;
--}
--
--static void adjust_link_dtsec(struct mac_device *mac_dev)
--{
--	struct phy_device *phy_dev = mac_dev->phy_dev;
--	struct fman_mac *fman_mac;
--	bool rx_pause, tx_pause;
--	int err;
--
--	fman_mac = mac_dev->fman_mac;
--	if (!phy_dev->link) {
--		dtsec_restart_autoneg(fman_mac);
--
--		return;
--	}
--
--	dtsec_adjust_link(fman_mac, phy_dev->speed);
--	mac_dev->update_speed(mac_dev, phy_dev->speed);
--	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
--	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
--	if (err < 0)
--		dev_err(mac_dev->dev, "fman_set_mac_active_pause() = %d\n",
--			err);
--}
--
- static int dtsec_set_exception(struct fman_mac *dtsec,
- 			       enum fman_mac_exceptions exception, bool enable)
- {
- 	struct dtsec_regs __iomem *regs = dtsec->regs;
- 	u32 bit_mask = 0;
- 
--	if (!is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
- 	if (exception != FM_MAC_EX_1G_1588_TS_RX_ERR) {
- 		bit_mask = get_exception_flag(exception);
- 		if (bit_mask) {
-@@ -1310,12 +1261,9 @@ static int dtsec_init(struct fman_mac *d
- {
- 	struct dtsec_regs __iomem *regs = dtsec->regs;
- 	struct dtsec_cfg *dtsec_drv_param;
--	u16 max_frm_ln;
-+	u16 max_frm_ln, tbicon;
- 	int err;
- 
--	if (is_init_done(dtsec->dtsec_drv_param))
--		return -EINVAL;
--
- 	if (DEFAULT_RESET_ON_INIT &&
- 	    (fman_reset_mac(dtsec->fm, dtsec->mac_id) != 0)) {
- 		pr_err("Can't reset MAC!\n");
-@@ -1330,38 +1278,19 @@ static int dtsec_init(struct fman_mac *d
- 
- 	err = init(dtsec->regs, dtsec_drv_param, dtsec->phy_if,
- 		   dtsec->max_speed, dtsec->addr, dtsec->exceptions,
--		   dtsec->tbiphy->mdio.addr);
-+		   dtsec->tbidev->addr);
- 	if (err) {
- 		free_init_resources(dtsec);
- 		pr_err("DTSEC version doesn't support this i/f mode\n");
- 		return err;
- 	}
- 
--	if (dtsec->phy_if == PHY_INTERFACE_MODE_SGMII) {
--		u16 tmp_reg16;
--
--		/* Configure the TBI PHY Control Register */
--		tmp_reg16 = TBICON_CLK_SELECT | TBICON_SOFT_RESET;
--		phy_write(dtsec->tbiphy, MII_TBICON, tmp_reg16);
--
--		tmp_reg16 = TBICON_CLK_SELECT;
--		phy_write(dtsec->tbiphy, MII_TBICON, tmp_reg16);
--
--		tmp_reg16 = (BMCR_RESET | BMCR_ANENABLE |
--			     BMCR_FULLDPLX | BMCR_SPEED1000);
--		phy_write(dtsec->tbiphy, MII_BMCR, tmp_reg16);
--
--		if (dtsec->basex_if)
--			tmp_reg16 = TBIANA_1000X;
--		else
--			tmp_reg16 = TBIANA_SGMII;
--		phy_write(dtsec->tbiphy, MII_ADVERTISE, tmp_reg16);
-+	/* Configure the TBI PHY Control Register */
-+	tbicon = TBICON_CLK_SELECT | TBICON_SOFT_RESET;
-+	mdiodev_write(dtsec->tbidev, MII_TBICON, tbicon);
- 
--		tmp_reg16 = (BMCR_ANENABLE | BMCR_ANRESTART |
--			     BMCR_FULLDPLX | BMCR_SPEED1000);
--
--		phy_write(dtsec->tbiphy, MII_BMCR, tmp_reg16);
--	}
-+	tbicon = TBICON_CLK_SELECT;
-+	mdiodev_write(dtsec->tbidev, MII_TBICON, tbicon);
- 
- 	/* Max Frame Length */
- 	max_frm_ln = (u16)ioread32be(&regs->maxfrm);
-@@ -1406,6 +1335,8 @@ static int dtsec_free(struct fman_mac *d
- 
- 	kfree(dtsec->dtsec_drv_param);
- 	dtsec->dtsec_drv_param = NULL;
-+	if (!IS_ERR_OR_NULL(dtsec->tbidev))
-+		put_device(&dtsec->tbidev->dev);
- 	kfree(dtsec);
- 
- 	return 0;
-@@ -1434,7 +1365,6 @@ static struct fman_mac *dtsec_config(str
- 
- 	dtsec->regs = mac_dev->vaddr;
- 	dtsec->addr = ENET_ADDR_TO_UINT64(mac_dev->addr);
--	dtsec->max_speed = params->max_speed;
- 	dtsec->phy_if = mac_dev->phy_if;
- 	dtsec->mac_id = params->mac_id;
- 	dtsec->exceptions = (DTSEC_IMASK_BREN	|
-@@ -1457,7 +1387,6 @@ static struct fman_mac *dtsec_config(str
- 	dtsec->en_tsu_err_exception = dtsec->dtsec_drv_param->ptp_exception_en;
- 
- 	dtsec->fm = params->fm;
--	dtsec->basex_if = params->basex_if;
- 
- 	/* Save FMan revision */
- 	fman_get_revision(dtsec->fm, &dtsec->fm_rev_info);
-@@ -1476,18 +1405,18 @@ int dtsec_initialization(struct mac_devi
- 	int			err;
- 	struct fman_mac		*dtsec;
- 	struct device_node	*phy_node;
-+	unsigned long		 capabilities;
-+	unsigned long		*supported;
- 
-+	mac_dev->phylink_ops		= &dtsec_mac_ops;
- 	mac_dev->set_promisc		= dtsec_set_promiscuous;
- 	mac_dev->change_addr		= dtsec_modify_mac_address;
- 	mac_dev->add_hash_mac_addr	= dtsec_add_hash_mac_address;
- 	mac_dev->remove_hash_mac_addr	= dtsec_del_hash_mac_address;
--	mac_dev->set_tx_pause		= dtsec_set_tx_pause_frames;
--	mac_dev->set_rx_pause		= dtsec_accept_rx_pause_frames;
- 	mac_dev->set_exception		= dtsec_set_exception;
- 	mac_dev->set_allmulti		= dtsec_set_allmulti;
- 	mac_dev->set_tstamp		= dtsec_set_tstamp;
- 	mac_dev->set_multi		= fman_set_multi;
--	mac_dev->adjust_link            = adjust_link_dtsec;
- 	mac_dev->enable			= dtsec_enable;
- 	mac_dev->disable		= dtsec_disable;
- 
-@@ -1502,19 +1431,56 @@ int dtsec_initialization(struct mac_devi
- 	dtsec->dtsec_drv_param->tx_pad_crc = true;
- 
- 	phy_node = of_parse_phandle(mac_node, "tbi-handle", 0);
--	if (!phy_node) {
--		pr_err("TBI PHY node is not available\n");
-+	if (!phy_node || of_device_is_available(phy_node)) {
-+		of_node_put(phy_node);
- 		err = -EINVAL;
-+		dev_err_probe(mac_dev->dev, err,
-+			      "TBI PCS node is not available\n");
- 		goto _return_fm_mac_free;
- 	}
- 
--	dtsec->tbiphy = of_phy_find_device(phy_node);
--	if (!dtsec->tbiphy) {
--		pr_err("of_phy_find_device (TBI PHY) failed\n");
--		err = -EINVAL;
-+	dtsec->tbidev = of_mdio_find_device(phy_node);
-+	of_node_put(phy_node);
-+	if (!dtsec->tbidev) {
-+		err = -EPROBE_DEFER;
-+		dev_err_probe(mac_dev->dev, err,
-+			      "could not find mdiodev for PCS\n");
- 		goto _return_fm_mac_free;
- 	}
--	put_device(&dtsec->tbiphy->mdio.dev);
-+	dtsec->pcs.ops = &dtsec_pcs_ops;
-+	dtsec->pcs.poll = true;
-+
-+	supported = mac_dev->phylink_config.supported_interfaces;
-+
-+	/* FIXME: Can we use DTSEC_ID2_INT_FULL_OFF to determine if these are
-+	 * supported? If not, we can determine support via the phy if SerDes
-+	 * support is added.
-+	 */
-+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII ||
-+	    mac_dev->phy_if == PHY_INTERFACE_MODE_1000BASEX) {
-+		__set_bit(PHY_INTERFACE_MODE_SGMII, supported);
-+		__set_bit(PHY_INTERFACE_MODE_1000BASEX, supported);
-+	} else if (mac_dev->phy_if == PHY_INTERFACE_MODE_2500BASEX) {
-+		__set_bit(PHY_INTERFACE_MODE_2500BASEX, supported);
-+	}
-+
-+	if (!(ioread32be(&dtsec->regs->tsec_id2) & DTSEC_ID2_INT_REDUCED_OFF)) {
-+		phy_interface_set_rgmii(supported);
-+
-+		/* DTSEC_ID2_INT_REDUCED_OFF indicates that the dTSEC supports
-+		 * RMII and RGMII. However, the only SoCs which support RMII
-+		 * are the P1017 and P1023. Avoid advertising this mode on
-+		 * other SoCs. This is a bit of a moot point, since there's no
-+		 * in-tree support for ethernet on these platforms...
-+		 */
-+		if (of_machine_is_compatible("fsl,P1023") ||
-+		    of_machine_is_compatible("fsl,P1023RDB"))
-+			__set_bit(PHY_INTERFACE_MODE_RMII, supported);
-+	}
-+
-+	capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
-+	capabilities |= MAC_10 | MAC_100 | MAC_1000FD | MAC_2500FD;
-+	mac_dev->phylink_config.mac_capabilities = capabilities;
- 
- 	err = dtsec_init(dtsec);
- 	if (err < 0)
---- a/drivers/net/ethernet/freescale/fman/fman_mac.h
-+++ b/drivers/net/ethernet/freescale/fman/fman_mac.h
-@@ -170,20 +170,10 @@ struct fman_mac_params {
- 	 * 0 - FM_MAX_NUM_OF_10G_MACS
- 	 */
- 	u8 mac_id;
--	/* Note that the speed should indicate the maximum rate that
--	 * this MAC should support rather than the actual speed;
--	 */
--	u16 max_speed;
- 	/* A handle to the FM object this port related to */
- 	void *fm;
- 	fman_mac_exception_cb *event_cb;    /* MDIO Events Callback Routine */
- 	fman_mac_exception_cb *exception_cb;/* Exception Callback Routine */
--	/* SGMII/QSGII interface with 1000BaseX auto-negotiation between MAC
--	 * and phy or backplane; Note: 1000BaseX auto-negotiation relates only
--	 * to interface between MAC and phy/backplane, SGMII phy can still
--	 * synchronize with far-end phy at 10Mbps, 100Mbps or 1000Mbps
--	*/
--	bool basex_if;
- };
- 
- struct eth_hash_t {
---- a/drivers/net/ethernet/freescale/fman/fman_memac.c
-+++ b/drivers/net/ethernet/freescale/fman/fman_memac.c
-@@ -278,9 +278,6 @@ struct fman_mac {
- 	struct memac_regs __iomem *regs;
- 	/* MAC address of device */
- 	u64 addr;
--	/* Ethernet physical interface */
--	phy_interface_t phy_if;
--	u16 max_speed;
- 	struct mac_device *dev_id; /* device cookie used by the exception cbs */
- 	fman_mac_exception_cb *exception_cb;
- 	fman_mac_exception_cb *event_cb;
-@@ -293,12 +290,12 @@ struct fman_mac {
- 	struct memac_cfg *memac_drv_param;
- 	void *fm;
- 	struct fman_rev_info fm_rev_info;
--	bool basex_if;
- 	struct phy *serdes;
- 	struct phylink_pcs *sgmii_pcs;
- 	struct phylink_pcs *qsgmii_pcs;
- 	struct phylink_pcs *xfi_pcs;
- 	bool allmulti_enabled;
-+	bool rgmii_no_half_duplex;
- };
- 
- static void add_addr_in_paddr(struct memac_regs __iomem *regs, const u8 *adr,
-@@ -356,7 +353,6 @@ static void set_exception(struct memac_r
- }
- 
- static int init(struct memac_regs __iomem *regs, struct memac_cfg *cfg,
--		phy_interface_t phy_if, u16 speed, bool slow_10g_if,
- 		u32 exceptions)
- {
- 	u32 tmp;
-@@ -384,41 +380,6 @@ static int init(struct memac_regs __iome
- 	iowrite32be((u32)cfg->pause_quanta, &regs->pause_quanta[0]);
- 	iowrite32be((u32)0, &regs->pause_thresh[0]);
- 
--	/* IF_MODE */
--	tmp = 0;
--	switch (phy_if) {
--	case PHY_INTERFACE_MODE_XGMII:
--		tmp |= IF_MODE_10G;
--		break;
--	case PHY_INTERFACE_MODE_MII:
--		tmp |= IF_MODE_MII;
--		break;
--	default:
--		tmp |= IF_MODE_GMII;
--		if (phy_if == PHY_INTERFACE_MODE_RGMII ||
--		    phy_if == PHY_INTERFACE_MODE_RGMII_ID ||
--		    phy_if == PHY_INTERFACE_MODE_RGMII_RXID ||
--		    phy_if == PHY_INTERFACE_MODE_RGMII_TXID)
--			tmp |= IF_MODE_RGMII | IF_MODE_RGMII_AUTO;
--	}
--	iowrite32be(tmp, &regs->if_mode);
--
--	/* TX_FIFO_SECTIONS */
--	tmp = 0;
--	if (phy_if == PHY_INTERFACE_MODE_XGMII) {
--		if (slow_10g_if) {
--			tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_SLOW_10G |
--				TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G);
--		} else {
--			tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_10G |
--				TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G);
--		}
--	} else {
--		tmp |= (TX_FIFO_SECTIONS_TX_AVAIL_1G |
--			TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G);
--	}
--	iowrite32be(tmp, &regs->tx_fifo_sections);
--
- 	/* clear all pending events and set-up interrupts */
- 	iowrite32be(0xffffffff, &regs->ievent);
- 	set_exception(regs, exceptions, true);
-@@ -458,24 +419,6 @@ static u32 get_mac_addr_hash_code(u64 et
- 	return xor_val;
- }
- 
--static void setup_sgmii_internal(struct fman_mac *memac,
--				 struct phylink_pcs *pcs,
--				 struct fixed_phy_status *fixed_link)
--{
--	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
--	phy_interface_t iface = memac->basex_if ? PHY_INTERFACE_MODE_1000BASEX :
--				PHY_INTERFACE_MODE_SGMII;
--	unsigned int mode = fixed_link ? MLO_AN_FIXED : MLO_AN_INBAND;
--
--	linkmode_set_pause(advertising, true, true);
--	pcs->ops->pcs_config(pcs, mode, iface, advertising, true);
--	if (fixed_link)
--		pcs->ops->pcs_link_up(pcs, mode, iface, fixed_link->speed,
--				      fixed_link->duplex);
--	else
--		pcs->ops->pcs_an_restart(pcs);
--}
--
- static int check_init_parameters(struct fman_mac *memac)
- {
- 	if (!memac->exception_cb) {
-@@ -581,41 +524,31 @@ static void free_init_resources(struct f
- 	memac->unicast_addr_hash = NULL;
- }
- 
--static bool is_init_done(struct memac_cfg *memac_drv_params)
--{
--	/* Checks if mEMAC driver parameters were initialized */
--	if (!memac_drv_params)
--		return true;
--
--	return false;
--}
--
- static int memac_enable(struct fman_mac *memac)
- {
--	struct memac_regs __iomem *regs = memac->regs;
--	u32 tmp;
-+	int ret;
- 
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
-+	ret = phy_init(memac->serdes);
-+	if (ret) {
-+		dev_err(memac->dev_id->dev,
-+			"could not initialize serdes: %pe\n", ERR_PTR(ret));
-+		return ret;
-+	}
- 
--	tmp = ioread32be(&regs->command_config);
--	tmp |= CMD_CFG_RX_EN | CMD_CFG_TX_EN;
--	iowrite32be(tmp, &regs->command_config);
-+	ret = phy_power_on(memac->serdes);
-+	if (ret) {
-+		dev_err(memac->dev_id->dev,
-+			"could not power on serdes: %pe\n", ERR_PTR(ret));
-+		phy_exit(memac->serdes);
-+	}
- 
--	return 0;
-+	return ret;
- }
- 
- static void memac_disable(struct fman_mac *memac)
--
- {
--	struct memac_regs __iomem *regs = memac->regs;
--	u32 tmp;
--
--	WARN_ON_ONCE(!is_init_done(memac->memac_drv_param));
--
--	tmp = ioread32be(&regs->command_config);
--	tmp &= ~(CMD_CFG_RX_EN | CMD_CFG_TX_EN);
--	iowrite32be(tmp, &regs->command_config);
-+	phy_power_off(memac->serdes);
-+	phy_exit(memac->serdes);
- }
- 
- static int memac_set_promiscuous(struct fman_mac *memac, bool new_val)
-@@ -623,9 +556,6 @@ static int memac_set_promiscuous(struct
- 	struct memac_regs __iomem *regs = memac->regs;
- 	u32 tmp;
- 
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
- 	tmp = ioread32be(&regs->command_config);
- 	if (new_val)
- 		tmp |= CMD_CFG_PROMIS_EN;
-@@ -637,73 +567,12 @@ static int memac_set_promiscuous(struct
- 	return 0;
- }
- 
--static int memac_adjust_link(struct fman_mac *memac, u16 speed)
--{
--	struct memac_regs __iomem *regs = memac->regs;
--	u32 tmp;
--
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
--	tmp = ioread32be(&regs->if_mode);
--
--	/* Set full duplex */
--	tmp &= ~IF_MODE_HD;
--
--	if (phy_interface_mode_is_rgmii(memac->phy_if)) {
--		/* Configure RGMII in manual mode */
--		tmp &= ~IF_MODE_RGMII_AUTO;
--		tmp &= ~IF_MODE_RGMII_SP_MASK;
--		/* Full duplex */
--		tmp |= IF_MODE_RGMII_FD;
--
--		switch (speed) {
--		case SPEED_1000:
--			tmp |= IF_MODE_RGMII_1000;
--			break;
--		case SPEED_100:
--			tmp |= IF_MODE_RGMII_100;
--			break;
--		case SPEED_10:
--			tmp |= IF_MODE_RGMII_10;
--			break;
--		default:
--			break;
--		}
--	}
--
--	iowrite32be(tmp, &regs->if_mode);
--
--	return 0;
--}
--
--static void adjust_link_memac(struct mac_device *mac_dev)
--{
--	struct phy_device *phy_dev = mac_dev->phy_dev;
--	struct fman_mac *fman_mac;
--	bool rx_pause, tx_pause;
--	int err;
--
--	fman_mac = mac_dev->fman_mac;
--	memac_adjust_link(fman_mac, phy_dev->speed);
--	mac_dev->update_speed(mac_dev, phy_dev->speed);
--
--	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
--	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
--	if (err < 0)
--		dev_err(mac_dev->dev, "fman_set_mac_active_pause() = %d\n",
--			err);
--}
--
- static int memac_set_tx_pause_frames(struct fman_mac *memac, u8 priority,
- 				     u16 pause_time, u16 thresh_time)
- {
- 	struct memac_regs __iomem *regs = memac->regs;
- 	u32 tmp;
- 
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
- 	tmp = ioread32be(&regs->tx_fifo_sections);
- 
- 	GET_TX_EMPTY_DEFAULT_VALUE(tmp);
-@@ -738,9 +607,6 @@ static int memac_accept_rx_pause_frames(
- 	struct memac_regs __iomem *regs = memac->regs;
- 	u32 tmp;
- 
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
- 	tmp = ioread32be(&regs->command_config);
- 	if (en)
- 		tmp &= ~CMD_CFG_PAUSE_IGNORE;
-@@ -752,12 +618,175 @@ static int memac_accept_rx_pause_frames(
- 	return 0;
- }
- 
-+static void memac_validate(struct phylink_config *config,
-+			   unsigned long *supported,
-+			   struct phylink_link_state *state)
-+{
-+	struct fman_mac *memac = fman_config_to_mac(config)->fman_mac;
-+	unsigned long caps = config->mac_capabilities;
-+
-+	if (phy_interface_mode_is_rgmii(state->interface) &&
-+	    memac->rgmii_no_half_duplex)
-+		caps &= ~(MAC_10HD | MAC_100HD);
-+
-+	phylink_validate_mask_caps(supported, state, caps);
-+}
-+
-+/**
-+ * memac_if_mode() - Convert an interface mode into an IF_MODE config
-+ * @interface: A phy interface mode
-+ *
-+ * Return: A configuration word, suitable for programming into the lower bits
-+ *         of %IF_MODE.
-+ */
-+static u32 memac_if_mode(phy_interface_t interface)
-+{
-+	switch (interface) {
-+	case PHY_INTERFACE_MODE_MII:
-+		return IF_MODE_MII;
-+	case PHY_INTERFACE_MODE_RGMII:
-+	case PHY_INTERFACE_MODE_RGMII_ID:
-+	case PHY_INTERFACE_MODE_RGMII_RXID:
-+	case PHY_INTERFACE_MODE_RGMII_TXID:
-+		return IF_MODE_GMII | IF_MODE_RGMII;
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+	case PHY_INTERFACE_MODE_QSGMII:
-+		return IF_MODE_GMII;
-+	case PHY_INTERFACE_MODE_10GBASER:
-+		return IF_MODE_10G;
-+	default:
-+		WARN_ON_ONCE(1);
-+		return 0;
-+	}
-+}
-+
-+static struct phylink_pcs *memac_select_pcs(struct phylink_config *config,
-+					    phy_interface_t iface)
-+{
-+	struct fman_mac *memac = fman_config_to_mac(config)->fman_mac;
-+
-+	switch (iface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+		return memac->sgmii_pcs;
-+	case PHY_INTERFACE_MODE_QSGMII:
-+		return memac->qsgmii_pcs;
-+	case PHY_INTERFACE_MODE_10GBASER:
-+		return memac->xfi_pcs;
-+	default:
-+		return NULL;
-+	}
-+}
-+
-+static int memac_prepare(struct phylink_config *config, unsigned int mode,
-+			 phy_interface_t iface)
-+{
-+	struct fman_mac *memac = fman_config_to_mac(config)->fman_mac;
-+
-+	switch (iface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+	case PHY_INTERFACE_MODE_QSGMII:
-+	case PHY_INTERFACE_MODE_10GBASER:
-+		return phy_set_mode_ext(memac->serdes, PHY_MODE_ETHERNET,
-+					iface);
-+	default:
-+		return 0;
-+	}
-+}
-+
-+static void memac_mac_config(struct phylink_config *config, unsigned int mode,
-+			     const struct phylink_link_state *state)
-+{
-+	struct mac_device *mac_dev = fman_config_to_mac(config);
-+	struct memac_regs __iomem *regs = mac_dev->fman_mac->regs;
-+	u32 tmp = ioread32be(&regs->if_mode);
-+
-+	tmp &= ~(IF_MODE_MASK | IF_MODE_RGMII);
-+	tmp |= memac_if_mode(state->interface);
-+	if (phylink_autoneg_inband(mode))
-+		tmp |= IF_MODE_RGMII_AUTO;
-+	iowrite32be(tmp, &regs->if_mode);
-+}
-+
-+static void memac_link_up(struct phylink_config *config, struct phy_device *phy,
-+			  unsigned int mode, phy_interface_t interface,
-+			  int speed, int duplex, bool tx_pause, bool rx_pause)
-+{
-+	struct mac_device *mac_dev = fman_config_to_mac(config);
-+	struct fman_mac *memac = mac_dev->fman_mac;
-+	struct memac_regs __iomem *regs = memac->regs;
-+	u32 tmp = memac_if_mode(interface);
-+	u16 pause_time = tx_pause ? FSL_FM_PAUSE_TIME_ENABLE :
-+			 FSL_FM_PAUSE_TIME_DISABLE;
-+
-+	memac_set_tx_pause_frames(memac, 0, pause_time, 0);
-+	memac_accept_rx_pause_frames(memac, rx_pause);
-+
-+	if (duplex == DUPLEX_HALF)
-+		tmp |= IF_MODE_HD;
-+
-+	switch (speed) {
-+	case SPEED_1000:
-+		tmp |= IF_MODE_RGMII_1000;
-+		break;
-+	case SPEED_100:
-+		tmp |= IF_MODE_RGMII_100;
-+		break;
-+	case SPEED_10:
-+		tmp |= IF_MODE_RGMII_10;
-+		break;
-+	}
-+	iowrite32be(tmp, &regs->if_mode);
-+
-+	/* TODO: EEE? */
-+
-+	if (speed == SPEED_10000) {
-+		if (memac->fm_rev_info.major == 6 &&
-+		    memac->fm_rev_info.minor == 4)
-+			tmp = TX_FIFO_SECTIONS_TX_AVAIL_SLOW_10G;
-+		else
-+			tmp = TX_FIFO_SECTIONS_TX_AVAIL_10G;
-+		tmp |= TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_10G;
-+	} else {
-+		tmp = TX_FIFO_SECTIONS_TX_AVAIL_1G |
-+		      TX_FIFO_SECTIONS_TX_EMPTY_DEFAULT_1G;
-+	}
-+	iowrite32be(tmp, &regs->tx_fifo_sections);
-+
-+	mac_dev->update_speed(mac_dev, speed);
-+
-+	tmp = ioread32be(&regs->command_config);
-+	tmp |= CMD_CFG_RX_EN | CMD_CFG_TX_EN;
-+	iowrite32be(tmp, &regs->command_config);
-+}
-+
-+static void memac_link_down(struct phylink_config *config, unsigned int mode,
-+			    phy_interface_t interface)
-+{
-+	struct fman_mac *memac = fman_config_to_mac(config)->fman_mac;
-+	struct memac_regs __iomem *regs = memac->regs;
-+	u32 tmp;
-+
-+	/* TODO: graceful */
-+	tmp = ioread32be(&regs->command_config);
-+	tmp &= ~(CMD_CFG_RX_EN | CMD_CFG_TX_EN);
-+	iowrite32be(tmp, &regs->command_config);
-+}
-+
-+static const struct phylink_mac_ops memac_mac_ops = {
-+	.validate = memac_validate,
-+	.mac_select_pcs = memac_select_pcs,
-+	.mac_prepare = memac_prepare,
-+	.mac_config = memac_mac_config,
-+	.mac_link_up = memac_link_up,
-+	.mac_link_down = memac_link_down,
-+};
-+
- static int memac_modify_mac_address(struct fman_mac *memac,
- 				    const enet_addr_t *enet_addr)
- {
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
- 	add_addr_in_paddr(memac->regs, (const u8 *)(*enet_addr), 0);
- 
- 	return 0;
-@@ -771,9 +800,6 @@ static int memac_add_hash_mac_address(st
- 	u32 hash;
- 	u64 addr;
- 
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
- 	addr = ENET_ADDR_TO_UINT64(*eth_addr);
- 
- 	if (!(addr & GROUP_ADDRESS)) {
-@@ -802,9 +828,6 @@ static int memac_set_allmulti(struct fma
- 	u32 entry;
- 	struct memac_regs __iomem *regs = memac->regs;
- 
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
- 	if (enable) {
- 		for (entry = 0; entry < HASH_TABLE_SIZE; entry++)
- 			iowrite32be(entry | HASH_CTRL_MCAST_EN,
-@@ -834,9 +857,6 @@ static int memac_del_hash_mac_address(st
- 	u32 hash;
- 	u64 addr;
- 
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
- 	addr = ENET_ADDR_TO_UINT64(*eth_addr);
- 
- 	hash = get_mac_addr_hash_code(addr) & HASH_CTRL_ADDR_MASK;
-@@ -864,9 +884,6 @@ static int memac_set_exception(struct fm
- {
- 	u32 bit_mask = 0;
- 
--	if (!is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
- 	bit_mask = get_exception_flag(exception);
- 	if (bit_mask) {
- 		if (enable)
-@@ -886,23 +903,15 @@ static int memac_init(struct fman_mac *m
- {
- 	struct memac_cfg *memac_drv_param;
- 	enet_addr_t eth_addr;
--	bool slow_10g_if = false;
--	struct fixed_phy_status *fixed_link = NULL;
- 	int err;
- 	u32 reg32 = 0;
- 
--	if (is_init_done(memac->memac_drv_param))
--		return -EINVAL;
--
- 	err = check_init_parameters(memac);
- 	if (err)
- 		return err;
- 
- 	memac_drv_param = memac->memac_drv_param;
- 
--	if (memac->fm_rev_info.major == 6 && memac->fm_rev_info.minor == 4)
--		slow_10g_if = true;
--
- 	/* First, reset the MAC if desired. */
- 	if (memac_drv_param->reset_on_init) {
- 		err = reset(memac->regs);
-@@ -918,10 +927,7 @@ static int memac_init(struct fman_mac *m
- 		add_addr_in_paddr(memac->regs, (const u8 *)eth_addr, 0);
- 	}
- 
--	fixed_link = memac_drv_param->fixed_link;
--
--	init(memac->regs, memac->memac_drv_param, memac->phy_if,
--	     memac->max_speed, slow_10g_if, memac->exceptions);
-+	init(memac->regs, memac->memac_drv_param, memac->exceptions);
- 
- 	/* FM_RX_FIFO_CORRUPT_ERRATA_10GMAC_A006320 errata workaround
- 	 * Exists only in FMan 6.0 and 6.3.
-@@ -937,11 +943,6 @@ static int memac_init(struct fman_mac *m
- 		iowrite32be(reg32, &memac->regs->command_config);
- 	}
- 
--	if (memac->phy_if == PHY_INTERFACE_MODE_SGMII)
--		setup_sgmii_internal(memac, memac->sgmii_pcs, fixed_link);
--	else if (memac->phy_if == PHY_INTERFACE_MODE_QSGMII)
--		setup_sgmii_internal(memac, memac->qsgmii_pcs, fixed_link);
--
- 	/* Max Frame Length */
- 	err = fman_set_mac_max_frame(memac->fm, memac->mac_id,
- 				     memac_drv_param->max_frame_length);
-@@ -970,9 +971,6 @@ static int memac_init(struct fman_mac *m
- 	fman_register_intr(memac->fm, FMAN_MOD_MAC, memac->mac_id,
- 			   FMAN_INTR_TYPE_NORMAL, memac_exception, memac);
- 
--	kfree(memac_drv_param);
--	memac->memac_drv_param = NULL;
--
- 	return 0;
- }
- 
-@@ -995,7 +993,6 @@ static int memac_free(struct fman_mac *m
- 	pcs_put(memac->sgmii_pcs);
- 	pcs_put(memac->qsgmii_pcs);
- 	pcs_put(memac->xfi_pcs);
--
- 	kfree(memac->memac_drv_param);
- 	kfree(memac);
- 
-@@ -1028,8 +1025,6 @@ static struct fman_mac *memac_config(str
- 	memac->addr = ENET_ADDR_TO_UINT64(mac_dev->addr);
- 
- 	memac->regs = mac_dev->vaddr;
--	memac->max_speed = params->max_speed;
--	memac->phy_if = mac_dev->phy_if;
- 	memac->mac_id = params->mac_id;
- 	memac->exceptions = (MEMAC_IMASK_TSECC_ER | MEMAC_IMASK_TECC_ER |
- 			     MEMAC_IMASK_RECC_ER | MEMAC_IMASK_MGI);
-@@ -1037,7 +1032,6 @@ static struct fman_mac *memac_config(str
- 	memac->event_cb = params->event_cb;
- 	memac->dev_id = mac_dev;
- 	memac->fm = params->fm;
--	memac->basex_if = params->basex_if;
- 
- 	/* Save FMan revision */
- 	fman_get_revision(memac->fm, &memac->fm_rev_info);
-@@ -1064,37 +1058,44 @@ static struct phylink_pcs *memac_pcs_cre
- 	return pcs;
- }
- 
-+static bool memac_supports(struct mac_device *mac_dev, phy_interface_t iface)
-+{
-+	/* If there's no serdes device, assume that it's been configured for
-+	 * whatever the default interface mode is.
-+	 */
-+	if (!mac_dev->fman_mac->serdes)
-+		return mac_dev->phy_if == iface;
-+	/* Otherwise, ask the serdes */
-+	return !phy_validate(mac_dev->fman_mac->serdes, PHY_MODE_ETHERNET,
-+			     iface, NULL);
-+}
-+
- int memac_initialization(struct mac_device *mac_dev,
- 			 struct device_node *mac_node,
- 			 struct fman_mac_params *params)
- {
- 	int			 err;
-+	struct device_node      *fixed;
- 	struct phylink_pcs	*pcs;
--	struct fixed_phy_status *fixed_link;
- 	struct fman_mac		*memac;
-+	unsigned long		 capabilities;
-+	unsigned long		*supported;
- 
-+	mac_dev->phylink_ops		= &memac_mac_ops;
- 	mac_dev->set_promisc		= memac_set_promiscuous;
- 	mac_dev->change_addr		= memac_modify_mac_address;
- 	mac_dev->add_hash_mac_addr	= memac_add_hash_mac_address;
- 	mac_dev->remove_hash_mac_addr	= memac_del_hash_mac_address;
--	mac_dev->set_tx_pause		= memac_set_tx_pause_frames;
--	mac_dev->set_rx_pause		= memac_accept_rx_pause_frames;
- 	mac_dev->set_exception		= memac_set_exception;
- 	mac_dev->set_allmulti		= memac_set_allmulti;
- 	mac_dev->set_tstamp		= memac_set_tstamp;
- 	mac_dev->set_multi		= fman_set_multi;
--	mac_dev->adjust_link            = adjust_link_memac;
- 	mac_dev->enable			= memac_enable;
- 	mac_dev->disable		= memac_disable;
- 
--	if (params->max_speed == SPEED_10000)
--		mac_dev->phy_if = PHY_INTERFACE_MODE_XGMII;
--
- 	mac_dev->fman_mac = memac_config(mac_dev, params);
--	if (!mac_dev->fman_mac) {
--		err = -EINVAL;
--		goto _return;
--	}
-+	if (!mac_dev->fman_mac)
-+		return -EINVAL;
- 
- 	memac = mac_dev->fman_mac;
- 	memac->memac_drv_param->max_frame_length = fman_get_max_frm();
-@@ -1136,9 +1137,9 @@ int memac_initialization(struct mac_devi
- 	else
- 		pcs = memac_pcs_create(mac_node, err);
- 
--	if (!pcs) {
--		dev_err(mac_dev->dev, "missing pcs\n");
--		err = -ENOENT;
-+	if (IS_ERR(pcs)) {
-+		err = PTR_ERR(pcs);
-+		dev_err_probe(mac_dev->dev, err, "missing pcs\n");
- 		goto _return_fm_mac_free;
- 	}
- 
-@@ -1159,84 +1160,100 @@ int memac_initialization(struct mac_devi
- 	} else if (IS_ERR(memac->serdes)) {
- 		dev_err_probe(mac_dev->dev, err, "could not get serdes\n");
- 		goto _return_fm_mac_free;
--	} else {
--		err = phy_init(memac->serdes);
--		if (err) {
--			dev_err_probe(mac_dev->dev, err,
--				      "could not initialize serdes\n");
--			goto _return_fm_mac_free;
--		}
--
--		err = phy_power_on(memac->serdes);
--		if (err) {
--			dev_err_probe(mac_dev->dev, err,
--				      "could not power on serdes\n");
--			goto _return_phy_exit;
--		}
--
--		if (memac->phy_if == PHY_INTERFACE_MODE_SGMII ||
--		    memac->phy_if == PHY_INTERFACE_MODE_1000BASEX ||
--		    memac->phy_if == PHY_INTERFACE_MODE_2500BASEX ||
--		    memac->phy_if == PHY_INTERFACE_MODE_QSGMII ||
--		    memac->phy_if == PHY_INTERFACE_MODE_XGMII) {
--			err = phy_set_mode_ext(memac->serdes, PHY_MODE_ETHERNET,
--					       memac->phy_if);
--			if (err) {
--				dev_err_probe(mac_dev->dev, err,
--					      "could not set serdes mode to %s\n",
--					      phy_modes(memac->phy_if));
--				goto _return_phy_power_off;
--			}
--		}
- 	}
- 
--	if (!mac_dev->phy_node && of_phy_is_fixed_link(mac_node)) {
--		struct phy_device *phy;
--
--		err = of_phy_register_fixed_link(mac_node);
--		if (err)
--			goto _return_phy_power_off;
--
--		fixed_link = kzalloc(sizeof(*fixed_link), GFP_KERNEL);
--		if (!fixed_link) {
--			err = -ENOMEM;
--			goto _return_phy_power_off;
--		}
-+	/* The internal connection to the serdes is XGMII, but this isn't
-+	 * really correct for the phy mode (which is the external connection).
-+	 * However, this is how all older device trees say that they want
-+	 * 10GBASE-R (aka XFI), so just convert it for them.
-+	 */
-+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
-+		mac_dev->phy_if = PHY_INTERFACE_MODE_10GBASER;
- 
--		mac_dev->phy_node = of_node_get(mac_node);
--		phy = of_phy_find_device(mac_dev->phy_node);
--		if (!phy) {
--			err = -EINVAL;
--			of_node_put(mac_dev->phy_node);
--			goto _return_fixed_link_free;
--		}
-+	/* TODO: The following interface modes are supported by (some) hardware
-+	 * but not by this driver:
-+	 * - 1000BASE-KX
-+	 * - 10GBASE-KR
-+	 * - XAUI/HiGig
-+	 */
-+	supported = mac_dev->phylink_config.supported_interfaces;
- 
--		fixed_link->link = phy->link;
--		fixed_link->speed = phy->speed;
--		fixed_link->duplex = phy->duplex;
--		fixed_link->pause = phy->pause;
--		fixed_link->asym_pause = phy->asym_pause;
-+	/* Note that half duplex is only supported on 10/100M interfaces. */
- 
--		put_device(&phy->mdio.dev);
--		memac->memac_drv_param->fixed_link = fixed_link;
-+	if (memac->sgmii_pcs &&
-+	    (memac_supports(mac_dev, PHY_INTERFACE_MODE_SGMII) ||
-+	     memac_supports(mac_dev, PHY_INTERFACE_MODE_1000BASEX))) {
-+		__set_bit(PHY_INTERFACE_MODE_SGMII, supported);
-+		__set_bit(PHY_INTERFACE_MODE_1000BASEX, supported);
-+	}
-+
-+	if (memac->sgmii_pcs &&
-+	    memac_supports(mac_dev, PHY_INTERFACE_MODE_2500BASEX))
-+		__set_bit(PHY_INTERFACE_MODE_2500BASEX, supported);
-+
-+	if (memac->qsgmii_pcs &&
-+	    memac_supports(mac_dev, PHY_INTERFACE_MODE_QSGMII))
-+		__set_bit(PHY_INTERFACE_MODE_QSGMII, supported);
-+	else if (mac_dev->phy_if == PHY_INTERFACE_MODE_QSGMII)
-+		dev_warn(mac_dev->dev, "no QSGMII pcs specified\n");
-+
-+	if (memac->xfi_pcs &&
-+	    memac_supports(mac_dev, PHY_INTERFACE_MODE_10GBASER)) {
-+		__set_bit(PHY_INTERFACE_MODE_10GBASER, supported);
-+	} else {
-+		/* From what I can tell, no 10g macs support RGMII. */
-+		phy_interface_set_rgmii(supported);
-+		__set_bit(PHY_INTERFACE_MODE_MII, supported);
- 	}
- 
-+	capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE | MAC_10 | MAC_100;
-+	capabilities |= MAC_1000FD | MAC_2500FD | MAC_10000FD;
-+
-+	/* These SoCs don't support half duplex at all; there's no different
-+	 * FMan version or compatible, so we just have to check the machine
-+	 * compatible instead
-+	 */
-+	if (of_machine_is_compatible("fsl,ls1043a") ||
-+	    of_machine_is_compatible("fsl,ls1046a") ||
-+	    of_machine_is_compatible("fsl,B4QDS"))
-+		capabilities &= ~(MAC_10HD | MAC_100HD);
-+
-+	mac_dev->phylink_config.mac_capabilities = capabilities;
-+
-+	/* The T2080 and T4240 don't support half duplex RGMII. There is no
-+	 * other way to identify these SoCs, so just use the machine
-+	 * compatible.
-+	 */
-+	if (of_machine_is_compatible("fsl,T2080QDS") ||
-+	    of_machine_is_compatible("fsl,T2080RDB") ||
-+	    of_machine_is_compatible("fsl,T2081QDS") ||
-+	    of_machine_is_compatible("fsl,T4240QDS") ||
-+	    of_machine_is_compatible("fsl,T4240RDB"))
-+		memac->rgmii_no_half_duplex = true;
-+
-+	/* Most boards should use MLO_AN_INBAND, but existing boards don't have
-+	 * a managed property. Default to MLO_AN_INBAND if nothing else is
-+	 * specified. We need to be careful and not enable this if we have a
-+	 * fixed link or if we are using MII or RGMII, since those
-+	 * configurations modes don't use in-band autonegotiation.
-+	 */
-+	fixed = of_get_child_by_name(mac_node, "fixed-link");
-+	if (!fixed && !of_property_read_bool(mac_node, "fixed-link") &&
-+	    !of_property_read_bool(mac_node, "managed") &&
-+	    mac_dev->phy_if != PHY_INTERFACE_MODE_MII &&
-+	    !phy_interface_mode_is_rgmii(mac_dev->phy_if))
-+		mac_dev->phylink_config.ovr_an_inband = true;
-+	of_node_put(fixed);
-+
- 	err = memac_init(mac_dev->fman_mac);
- 	if (err < 0)
--		goto _return_fixed_link_free;
-+		goto _return_fm_mac_free;
- 
- 	dev_info(mac_dev->dev, "FMan MEMAC\n");
- 
--	goto _return;
-+	return 0;
- 
--_return_phy_power_off:
--	phy_power_off(memac->serdes);
--_return_phy_exit:
--	phy_exit(memac->serdes);
--_return_fixed_link_free:
--	kfree(fixed_link);
- _return_fm_mac_free:
- 	memac_free(mac_dev->fman_mac);
--_return:
- 	return err;
- }
---- a/drivers/net/ethernet/freescale/fman/fman_tgec.c
-+++ b/drivers/net/ethernet/freescale/fman/fman_tgec.c
-@@ -13,6 +13,7 @@
- #include <linux/bitrev.h>
- #include <linux/io.h>
- #include <linux/crc32.h>
-+#include <linux/netdevice.h>
- 
- /* Transmit Inter-Packet Gap Length Register (TX_IPG_LENGTH) */
- #define TGEC_TX_IPG_LENGTH_MASK	0x000003ff
-@@ -243,10 +244,6 @@ static int init(struct tgec_regs __iomem
- 
- static int check_init_parameters(struct fman_mac *tgec)
- {
--	if (tgec->max_speed < SPEED_10000) {
--		pr_err("10G MAC driver only support 10G speed\n");
--		return -EINVAL;
--	}
- 	if (!tgec->exception_cb) {
- 		pr_err("uninitialized exception_cb\n");
- 		return -EINVAL;
-@@ -384,40 +381,13 @@ static void free_init_resources(struct f
- 	tgec->unicast_addr_hash = NULL;
- }
- 
--static bool is_init_done(struct tgec_cfg *cfg)
--{
--	/* Checks if tGEC driver parameters were initialized */
--	if (!cfg)
--		return true;
--
--	return false;
--}
--
- static int tgec_enable(struct fman_mac *tgec)
- {
--	struct tgec_regs __iomem *regs = tgec->regs;
--	u32 tmp;
--
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
--	tmp = ioread32be(&regs->command_config);
--	tmp |= CMD_CFG_RX_EN | CMD_CFG_TX_EN;
--	iowrite32be(tmp, &regs->command_config);
--
- 	return 0;
- }
- 
- static void tgec_disable(struct fman_mac *tgec)
- {
--	struct tgec_regs __iomem *regs = tgec->regs;
--	u32 tmp;
--
--	WARN_ON_ONCE(!is_init_done(tgec->cfg));
--
--	tmp = ioread32be(&regs->command_config);
--	tmp &= ~(CMD_CFG_RX_EN | CMD_CFG_TX_EN);
--	iowrite32be(tmp, &regs->command_config);
- }
- 
- static int tgec_set_promiscuous(struct fman_mac *tgec, bool new_val)
-@@ -425,9 +395,6 @@ static int tgec_set_promiscuous(struct f
- 	struct tgec_regs __iomem *regs = tgec->regs;
- 	u32 tmp;
- 
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	tmp = ioread32be(&regs->command_config);
- 	if (new_val)
- 		tmp |= CMD_CFG_PROMIS_EN;
-@@ -444,9 +411,6 @@ static int tgec_set_tx_pause_frames(stru
- {
- 	struct tgec_regs __iomem *regs = tgec->regs;
- 
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	iowrite32be((u32)pause_time, &regs->pause_quant);
- 
- 	return 0;
-@@ -457,9 +421,6 @@ static int tgec_accept_rx_pause_frames(s
- 	struct tgec_regs __iomem *regs = tgec->regs;
- 	u32 tmp;
- 
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	tmp = ioread32be(&regs->command_config);
- 	if (!en)
- 		tmp |= CMD_CFG_PAUSE_IGNORE;
-@@ -470,12 +431,53 @@ static int tgec_accept_rx_pause_frames(s
- 	return 0;
- }
- 
-+static void tgec_mac_config(struct phylink_config *config, unsigned int mode,
-+			    const struct phylink_link_state *state)
-+{
-+}
-+
-+static void tgec_link_up(struct phylink_config *config, struct phy_device *phy,
-+			 unsigned int mode, phy_interface_t interface,
-+			 int speed, int duplex, bool tx_pause, bool rx_pause)
-+{
-+	struct mac_device *mac_dev = fman_config_to_mac(config);
-+	struct fman_mac *tgec = mac_dev->fman_mac;
-+	struct tgec_regs __iomem *regs = tgec->regs;
-+	u16 pause_time = tx_pause ? FSL_FM_PAUSE_TIME_ENABLE :
-+			 FSL_FM_PAUSE_TIME_DISABLE;
-+	u32 tmp;
-+
-+	tgec_set_tx_pause_frames(tgec, 0, pause_time, 0);
-+	tgec_accept_rx_pause_frames(tgec, rx_pause);
-+	mac_dev->update_speed(mac_dev, speed);
-+
-+	tmp = ioread32be(&regs->command_config);
-+	tmp |= CMD_CFG_RX_EN | CMD_CFG_TX_EN;
-+	iowrite32be(tmp, &regs->command_config);
-+}
-+
-+static void tgec_link_down(struct phylink_config *config, unsigned int mode,
-+			   phy_interface_t interface)
-+{
-+	struct fman_mac *tgec = fman_config_to_mac(config)->fman_mac;
-+	struct tgec_regs __iomem *regs = tgec->regs;
-+	u32 tmp;
-+
-+	tmp = ioread32be(&regs->command_config);
-+	tmp &= ~(CMD_CFG_RX_EN | CMD_CFG_TX_EN);
-+	iowrite32be(tmp, &regs->command_config);
-+}
-+
-+static const struct phylink_mac_ops tgec_mac_ops = {
-+	.validate = phylink_generic_validate,
-+	.mac_config = tgec_mac_config,
-+	.mac_link_up = tgec_link_up,
-+	.mac_link_down = tgec_link_down,
-+};
-+
- static int tgec_modify_mac_address(struct fman_mac *tgec,
- 				   const enet_addr_t *p_enet_addr)
- {
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	tgec->addr = ENET_ADDR_TO_UINT64(*p_enet_addr);
- 	set_mac_address(tgec->regs, (const u8 *)(*p_enet_addr));
- 
-@@ -490,9 +492,6 @@ static int tgec_add_hash_mac_address(str
- 	u32 crc = 0xFFFFFFFF, hash;
- 	u64 addr;
- 
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	addr = ENET_ADDR_TO_UINT64(*eth_addr);
- 
- 	if (!(addr & GROUP_ADDRESS)) {
-@@ -525,9 +524,6 @@ static int tgec_set_allmulti(struct fman
- 	u32 entry;
- 	struct tgec_regs __iomem *regs = tgec->regs;
- 
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	if (enable) {
- 		for (entry = 0; entry < TGEC_HASH_TABLE_SIZE; entry++)
- 			iowrite32be(entry | TGEC_HASH_MCAST_EN,
-@@ -548,9 +544,6 @@ static int tgec_set_tstamp(struct fman_m
- 	struct tgec_regs __iomem *regs = tgec->regs;
- 	u32 tmp;
- 
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	tmp = ioread32be(&regs->command_config);
- 
- 	if (enable)
-@@ -572,9 +565,6 @@ static int tgec_del_hash_mac_address(str
- 	u32 crc = 0xFFFFFFFF, hash;
- 	u64 addr;
- 
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	addr = ((*(u64 *)eth_addr) >> 16);
- 
- 	/* CRC calculation */
-@@ -601,22 +591,12 @@ static int tgec_del_hash_mac_address(str
- 	return 0;
- }
- 
--static void tgec_adjust_link(struct mac_device *mac_dev)
--{
--	struct phy_device *phy_dev = mac_dev->phy_dev;
--
--	mac_dev->update_speed(mac_dev, phy_dev->speed);
--}
--
- static int tgec_set_exception(struct fman_mac *tgec,
- 			      enum fman_mac_exceptions exception, bool enable)
- {
- 	struct tgec_regs __iomem *regs = tgec->regs;
- 	u32 bit_mask = 0;
- 
--	if (!is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	bit_mask = get_exception_flag(exception);
- 	if (bit_mask) {
- 		if (enable)
-@@ -641,9 +621,6 @@ static int tgec_init(struct fman_mac *tg
- 	enet_addr_t eth_addr;
- 	int err;
- 
--	if (is_init_done(tgec->cfg))
--		return -EINVAL;
--
- 	if (DEFAULT_RESET_ON_INIT &&
- 	    (fman_reset_mac(tgec->fm, tgec->mac_id) != 0)) {
- 		pr_err("Can't reset MAC!\n");
-@@ -753,7 +730,6 @@ static struct fman_mac *tgec_config(stru
- 
- 	tgec->regs = mac_dev->vaddr;
- 	tgec->addr = ENET_ADDR_TO_UINT64(mac_dev->addr);
--	tgec->max_speed = params->max_speed;
- 	tgec->mac_id = params->mac_id;
- 	tgec->exceptions = (TGEC_IMASK_MDIO_SCAN_EVENT	|
- 			    TGEC_IMASK_REM_FAULT	|
-@@ -788,17 +764,15 @@ int tgec_initialization(struct mac_devic
- 	int err;
- 	struct fman_mac		*tgec;
- 
-+	mac_dev->phylink_ops		= &tgec_mac_ops;
- 	mac_dev->set_promisc		= tgec_set_promiscuous;
- 	mac_dev->change_addr		= tgec_modify_mac_address;
- 	mac_dev->add_hash_mac_addr	= tgec_add_hash_mac_address;
- 	mac_dev->remove_hash_mac_addr	= tgec_del_hash_mac_address;
--	mac_dev->set_tx_pause		= tgec_set_tx_pause_frames;
--	mac_dev->set_rx_pause		= tgec_accept_rx_pause_frames;
- 	mac_dev->set_exception		= tgec_set_exception;
- 	mac_dev->set_allmulti		= tgec_set_allmulti;
- 	mac_dev->set_tstamp		= tgec_set_tstamp;
- 	mac_dev->set_multi		= fman_set_multi;
--	mac_dev->adjust_link            = tgec_adjust_link;
- 	mac_dev->enable			= tgec_enable;
- 	mac_dev->disable		= tgec_disable;
- 
-@@ -808,6 +782,19 @@ int tgec_initialization(struct mac_devic
- 		goto _return;
- 	}
- 
-+	/* The internal connection to the serdes is XGMII, but this isn't
-+	 * really correct for the phy mode (which is the external connection).
-+	 * However, this is how all older device trees say that they want
-+	 * XAUI, so just convert it for them.
-+	 */
-+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
-+		mac_dev->phy_if = PHY_INTERFACE_MODE_XAUI;
-+
-+	__set_bit(PHY_INTERFACE_MODE_XAUI,
-+		  mac_dev->phylink_config.supported_interfaces);
-+	mac_dev->phylink_config.mac_capabilities =
-+		MAC_SYM_PAUSE | MAC_ASYM_PAUSE | MAC_10000FD;
-+
- 	tgec = mac_dev->fman_mac;
- 	tgec->cfg->max_frame_length = fman_get_max_frm();
- 	err = tgec_init(tgec);
---- a/drivers/net/ethernet/freescale/fman/mac.c
-+++ b/drivers/net/ethernet/freescale/fman/mac.c
-@@ -15,6 +15,7 @@
- #include <linux/phy.h>
- #include <linux/netdevice.h>
- #include <linux/phy_fixed.h>
-+#include <linux/phylink.h>
- #include <linux/etherdevice.h>
- #include <linux/libfdt_env.h>
- 
-@@ -93,130 +94,8 @@ int fman_set_multi(struct net_device *ne
- 	return 0;
- }
- 
--/**
-- * fman_set_mac_active_pause
-- * @mac_dev:	A pointer to the MAC device
-- * @rx:		Pause frame setting for RX
-- * @tx:		Pause frame setting for TX
-- *
-- * Set the MAC RX/TX PAUSE frames settings
-- *
-- * Avoid redundant calls to FMD, if the MAC driver already contains the desired
-- * active PAUSE settings. Otherwise, the new active settings should be reflected
-- * in FMan.
-- *
-- * Return: 0 on success; Error code otherwise.
-- */
--int fman_set_mac_active_pause(struct mac_device *mac_dev, bool rx, bool tx)
--{
--	struct fman_mac *fman_mac = mac_dev->fman_mac;
--	int err = 0;
--
--	if (rx != mac_dev->rx_pause_active) {
--		err = mac_dev->set_rx_pause(fman_mac, rx);
--		if (likely(err == 0))
--			mac_dev->rx_pause_active = rx;
--	}
--
--	if (tx != mac_dev->tx_pause_active) {
--		u16 pause_time = (tx ? FSL_FM_PAUSE_TIME_ENABLE :
--					 FSL_FM_PAUSE_TIME_DISABLE);
--
--		err = mac_dev->set_tx_pause(fman_mac, 0, pause_time, 0);
--
--		if (likely(err == 0))
--			mac_dev->tx_pause_active = tx;
--	}
--
--	return err;
--}
--EXPORT_SYMBOL(fman_set_mac_active_pause);
--
--/**
-- * fman_get_pause_cfg
-- * @mac_dev:	A pointer to the MAC device
-- * @rx_pause:	Return value for RX setting
-- * @tx_pause:	Return value for TX setting
-- *
-- * Determine the MAC RX/TX PAUSE frames settings based on PHY
-- * autonegotiation or values set by eththool.
-- *
-- * Return: Pointer to FMan device.
-- */
--void fman_get_pause_cfg(struct mac_device *mac_dev, bool *rx_pause,
--			bool *tx_pause)
--{
--	struct phy_device *phy_dev = mac_dev->phy_dev;
--	u16 lcl_adv, rmt_adv;
--	u8 flowctrl;
--
--	*rx_pause = *tx_pause = false;
--
--	if (!phy_dev->duplex)
--		return;
--
--	/* If PAUSE autonegotiation is disabled, the TX/RX PAUSE settings
--	 * are those set by ethtool.
--	 */
--	if (!mac_dev->autoneg_pause) {
--		*rx_pause = mac_dev->rx_pause_req;
--		*tx_pause = mac_dev->tx_pause_req;
--		return;
--	}
--
--	/* Else if PAUSE autonegotiation is enabled, the TX/RX PAUSE
--	 * settings depend on the result of the link negotiation.
--	 */
--
--	/* get local capabilities */
--	lcl_adv = linkmode_adv_to_lcl_adv_t(phy_dev->advertising);
--
--	/* get link partner capabilities */
--	rmt_adv = 0;
--	if (phy_dev->pause)
--		rmt_adv |= LPA_PAUSE_CAP;
--	if (phy_dev->asym_pause)
--		rmt_adv |= LPA_PAUSE_ASYM;
--
--	/* Calculate TX/RX settings based on local and peer advertised
--	 * symmetric/asymmetric PAUSE capabilities.
--	 */
--	flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
--	if (flowctrl & FLOW_CTRL_RX)
--		*rx_pause = true;
--	if (flowctrl & FLOW_CTRL_TX)
--		*tx_pause = true;
--}
--EXPORT_SYMBOL(fman_get_pause_cfg);
--
--#define DTSEC_SUPPORTED \
--	(SUPPORTED_10baseT_Half \
--	| SUPPORTED_10baseT_Full \
--	| SUPPORTED_100baseT_Half \
--	| SUPPORTED_100baseT_Full \
--	| SUPPORTED_Autoneg \
--	| SUPPORTED_Pause \
--	| SUPPORTED_Asym_Pause \
--	| SUPPORTED_FIBRE \
--	| SUPPORTED_MII)
--
- static DEFINE_MUTEX(eth_lock);
- 
--static const u16 phy2speed[] = {
--	[PHY_INTERFACE_MODE_MII]		= SPEED_100,
--	[PHY_INTERFACE_MODE_GMII]		= SPEED_1000,
--	[PHY_INTERFACE_MODE_SGMII]		= SPEED_1000,
--	[PHY_INTERFACE_MODE_TBI]		= SPEED_1000,
--	[PHY_INTERFACE_MODE_RMII]		= SPEED_100,
--	[PHY_INTERFACE_MODE_RGMII]		= SPEED_1000,
--	[PHY_INTERFACE_MODE_RGMII_ID]		= SPEED_1000,
--	[PHY_INTERFACE_MODE_RGMII_RXID]	= SPEED_1000,
--	[PHY_INTERFACE_MODE_RGMII_TXID]	= SPEED_1000,
--	[PHY_INTERFACE_MODE_RTBI]		= SPEED_1000,
--	[PHY_INTERFACE_MODE_QSGMII]		= SPEED_1000,
--	[PHY_INTERFACE_MODE_XGMII]		= SPEED_10000
--};
--
- static struct platform_device *dpaa_eth_add_device(int fman_id,
- 						   struct mac_device *mac_dev)
- {
-@@ -263,8 +142,8 @@ no_mem:
- }
- 
- static const struct of_device_id mac_match[] = {
--	{ .compatible	= "fsl,fman-dtsec", .data = dtsec_initialization },
--	{ .compatible	= "fsl,fman-xgec", .data = tgec_initialization },
-+	{ .compatible   = "fsl,fman-dtsec", .data = dtsec_initialization },
-+	{ .compatible   = "fsl,fman-xgec", .data = tgec_initialization },
- 	{ .compatible	= "fsl,fman-memac", .data = memac_initialization },
- 	{}
- };
-@@ -295,6 +174,7 @@ static int mac_probe(struct platform_dev
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
- 		return -ENOMEM;
-+	platform_set_drvdata(_of_dev, mac_dev);
- 
- 	/* Save private information */
- 	mac_dev->priv = priv;
-@@ -424,57 +304,21 @@ static int mac_probe(struct platform_dev
- 	}
- 	mac_dev->phy_if = phy_if;
- 
--	priv->speed		= phy2speed[mac_dev->phy_if];
--	params.max_speed	= priv->speed;
--	mac_dev->if_support	= DTSEC_SUPPORTED;
--	/* We don't support half-duplex in SGMII mode */
--	if (mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII)
--		mac_dev->if_support &= ~(SUPPORTED_10baseT_Half |
--					SUPPORTED_100baseT_Half);
--
--	/* Gigabit support (no half-duplex) */
--	if (params.max_speed == 1000)
--		mac_dev->if_support |= SUPPORTED_1000baseT_Full;
--
--	/* The 10G interface only supports one mode */
--	if (mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
--		mac_dev->if_support = SUPPORTED_10000baseT_Full;
--
--	/* Get the rest of the PHY information */
--	mac_dev->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
--
--	params.basex_if		= false;
- 	params.mac_id		= priv->cell_index;
- 	params.fm		= (void *)priv->fman;
- 	params.exception_cb	= mac_exception;
- 	params.event_cb		= mac_exception;
- 
- 	err = init(mac_dev, mac_node, &params);
--	if (err < 0) {
--		dev_err(dev, "mac_dev->init() = %d\n", err);
--		of_node_put(mac_dev->phy_node);
--		return err;
--	}
--
--	/* pause frame autonegotiation enabled */
--	mac_dev->autoneg_pause = true;
--
--	/* By intializing the values to false, force FMD to enable PAUSE frames
--	 * on RX and TX
--	 */
--	mac_dev->rx_pause_req = true;
--	mac_dev->tx_pause_req = true;
--	mac_dev->rx_pause_active = false;
--	mac_dev->tx_pause_active = false;
--	err = fman_set_mac_active_pause(mac_dev, true, true);
- 	if (err < 0)
--		dev_err(dev, "fman_set_mac_active_pause() = %d\n", err);
-+		return err;
- 
- 	if (!is_zero_ether_addr(mac_dev->addr))
- 		dev_info(dev, "FMan MAC address: %pM\n", mac_dev->addr);
- 
- 	priv->eth_dev = dpaa_eth_add_device(fman_id, mac_dev);
- 	if (IS_ERR(priv->eth_dev)) {
-+		err = PTR_ERR(priv->eth_dev);
- 		dev_err(dev, "failed to add Ethernet platform device for MAC %d\n",
- 			priv->cell_index);
- 		priv->eth_dev = NULL;
---- a/drivers/net/ethernet/freescale/fman/mac.h
-+++ b/drivers/net/ethernet/freescale/fman/mac.h
-@@ -9,6 +9,7 @@
- #include <linux/device.h>
- #include <linux/if_ether.h>
- #include <linux/phy.h>
-+#include <linux/phylink.h>
- #include <linux/list.h>
- 
- #include "fman_port.h"
-@@ -24,32 +25,22 @@ struct mac_device {
- 	struct resource		*res;
- 	u8			 addr[ETH_ALEN];
- 	struct fman_port	*port[2];
--	u32			 if_support;
--	struct phy_device	*phy_dev;
-+	struct phylink		*phylink;
-+	struct phylink_config	phylink_config;
- 	phy_interface_t		phy_if;
--	struct device_node	*phy_node;
--	struct net_device	*net_dev;
- 
--	bool autoneg_pause;
--	bool rx_pause_req;
--	bool tx_pause_req;
--	bool rx_pause_active;
--	bool tx_pause_active;
- 	bool promisc;
- 	bool allmulti;
- 
-+	const struct phylink_mac_ops *phylink_ops;
- 	int (*enable)(struct fman_mac *mac_dev);
- 	void (*disable)(struct fman_mac *mac_dev);
--	void (*adjust_link)(struct mac_device *mac_dev);
- 	int (*set_promisc)(struct fman_mac *mac_dev, bool enable);
- 	int (*change_addr)(struct fman_mac *mac_dev, const enet_addr_t *enet_addr);
- 	int (*set_allmulti)(struct fman_mac *mac_dev, bool enable);
- 	int (*set_tstamp)(struct fman_mac *mac_dev, bool enable);
- 	int (*set_multi)(struct net_device *net_dev,
- 			 struct mac_device *mac_dev);
--	int (*set_rx_pause)(struct fman_mac *mac_dev, bool en);
--	int (*set_tx_pause)(struct fman_mac *mac_dev, u8 priority,
--			    u16 pause_time, u16 thresh_time);
- 	int (*set_exception)(struct fman_mac *mac_dev,
- 			     enum fman_mac_exceptions exception, bool enable);
- 	int (*add_hash_mac_addr)(struct fman_mac *mac_dev,
-@@ -63,6 +54,12 @@ struct mac_device {
- 	struct mac_priv_s	*priv;
- };
- 
-+static inline struct mac_device
-+*fman_config_to_mac(struct phylink_config *config)
-+{
-+	return container_of(config, struct mac_device, phylink_config);
-+}
-+
- struct dpaa_eth_data {
- 	struct mac_device *mac_dev;
- 	int mac_hw_id;
diff --git a/target/linux/generic/backport-6.1/715-04-v6.2-net-phylink-provide-phylink_validate_mask_caps-helpe.patch b/target/linux/generic/backport-6.1/715-04-v6.2-net-phylink-provide-phylink_validate_mask_caps-helpe.patch
deleted file mode 100644
index 06c348b1cdfa..000000000000
--- a/target/linux/generic/backport-6.1/715-04-v6.2-net-phylink-provide-phylink_validate_mask_caps-helpe.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From bf4de031052fe7c5309e8956c342d4e5ce79038e Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Mon, 17 Oct 2022 16:22:35 -0400
-Subject: [PATCH 04/21] net: phylink: provide phylink_validate_mask_caps()
- helper
-
-Provide a helper that restricts the link modes according to the
-phylink capabilities.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-[rebased on net-next/master and added documentation]
-Signed-off-by: Sean Anderson <sean.anderson@seco.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phylink.c | 41 +++++++++++++++++++++++++++------------
- include/linux/phylink.h   |  3 +++
- 2 files changed, 32 insertions(+), 12 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -564,31 +564,48 @@ unsigned long phylink_get_capabilities(p
- EXPORT_SYMBOL_GPL(phylink_get_capabilities);
- 
- /**
-- * phylink_generic_validate() - generic validate() callback implementation
-- * @config: a pointer to a &struct phylink_config.
-+ * phylink_validate_mask_caps() - Restrict link modes based on caps
-  * @supported: ethtool bitmask for supported link modes.
-- * @state: a pointer to a &struct phylink_link_state.
-+ * @state: an (optional) pointer to a &struct phylink_link_state.
-+ * @mac_capabilities: bitmask of MAC capabilities
-  *
-- * Generic implementation of the validate() callback that MAC drivers can
-- * use when they pass the range of supported interfaces and MAC capabilities.
-- * This makes use of phylink_get_linkmodes().
-+ * Calculate the supported link modes based on @mac_capabilities, and restrict
-+ * @supported and @state based on that. Use this function if your capabiliies
-+ * aren't constant, such as if they vary depending on the interface.
-  */
--void phylink_generic_validate(struct phylink_config *config,
--			      unsigned long *supported,
--			      struct phylink_link_state *state)
-+void phylink_validate_mask_caps(unsigned long *supported,
-+				struct phylink_link_state *state,
-+				unsigned long mac_capabilities)
- {
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- 	unsigned long caps;
- 
- 	phylink_set_port_modes(mask);
- 	phylink_set(mask, Autoneg);
--	caps = phylink_get_capabilities(state->interface,
--					config->mac_capabilities,
-+	caps = phylink_get_capabilities(state->interface, mac_capabilities,
- 					state->rate_matching);
- 	phylink_caps_to_linkmodes(mask, caps);
- 
- 	linkmode_and(supported, supported, mask);
--	linkmode_and(state->advertising, state->advertising, mask);
-+	if (state)
-+		linkmode_and(state->advertising, state->advertising, mask);
-+}
-+EXPORT_SYMBOL_GPL(phylink_validate_mask_caps);
-+
-+/**
-+ * phylink_generic_validate() - generic validate() callback implementation
-+ * @config: a pointer to a &struct phylink_config.
-+ * @supported: ethtool bitmask for supported link modes.
-+ * @state: a pointer to a &struct phylink_link_state.
-+ *
-+ * Generic implementation of the validate() callback that MAC drivers can
-+ * use when they pass the range of supported interfaces and MAC capabilities.
-+ */
-+void phylink_generic_validate(struct phylink_config *config,
-+			      unsigned long *supported,
-+			      struct phylink_link_state *state)
-+{
-+	phylink_validate_mask_caps(supported, state, config->mac_capabilities);
- }
- EXPORT_SYMBOL_GPL(phylink_generic_validate);
- 
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -558,6 +558,9 @@ void phylink_caps_to_linkmodes(unsigned
- unsigned long phylink_get_capabilities(phy_interface_t interface,
- 				       unsigned long mac_capabilities,
- 				       int rate_matching);
-+void phylink_validate_mask_caps(unsigned long *supported,
-+				struct phylink_link_state *state,
-+				unsigned long caps);
- void phylink_generic_validate(struct phylink_config *config,
- 			      unsigned long *supported,
- 			      struct phylink_link_state *state);
diff --git a/target/linux/generic/backport-6.1/715-05-v6.2-phylink-require-valid-state-argument-to-phylink_vali.patch b/target/linux/generic/backport-6.1/715-05-v6.2-phylink-require-valid-state-argument-to-phylink_vali.patch
deleted file mode 100644
index e3a1dda688ab..000000000000
--- a/target/linux/generic/backport-6.1/715-05-v6.2-phylink-require-valid-state-argument-to-phylink_vali.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 2bf7e4a68c42eed909f3c29582e1fb85cb157e35 Mon Sep 17 00:00:00 2001
-From: Jakub Kicinski <kuba@kernel.org>
-Date: Tue, 25 Oct 2022 11:51:26 -0700
-Subject: [PATCH 05/21] phylink: require valid state argument to
- phylink_validate_mask_caps()
-
-state is deferenced earlier in the function, the NULL check
-is pointless. Since we don't have any crash reports presumably
-it's safe to assume state is not NULL.
-
-Fixes: f392a1846489 ("net: phylink: provide phylink_validate_mask_caps() helper")
-Reviewed-by: Sean Anderson <sean.anderson@seco.com>
-Link: https://lore.kernel.org/r/20221025185126.1720553-1-kuba@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -566,7 +566,7 @@ EXPORT_SYMBOL_GPL(phylink_get_capabiliti
- /**
-  * phylink_validate_mask_caps() - Restrict link modes based on caps
-  * @supported: ethtool bitmask for supported link modes.
-- * @state: an (optional) pointer to a &struct phylink_link_state.
-+ * @state: pointer to a &struct phylink_link_state.
-  * @mac_capabilities: bitmask of MAC capabilities
-  *
-  * Calculate the supported link modes based on @mac_capabilities, and restrict
-@@ -587,8 +587,7 @@ void phylink_validate_mask_caps(unsigned
- 	phylink_caps_to_linkmodes(mask, caps);
- 
- 	linkmode_and(supported, supported, mask);
--	if (state)
--		linkmode_and(state->advertising, state->advertising, mask);
-+	linkmode_and(state->advertising, state->advertising, mask);
- }
- EXPORT_SYMBOL_GPL(phylink_validate_mask_caps);
- 
diff --git a/target/linux/generic/backport-6.1/715-06-v6.2-net-phylink-add-phylink_get_link_timer_ns-helper.patch b/target/linux/generic/backport-6.1/715-06-v6.2-net-phylink-add-phylink_get_link_timer_ns-helper.patch
deleted file mode 100644
index c217ed87b51d..000000000000
--- a/target/linux/generic/backport-6.1/715-06-v6.2-net-phylink-add-phylink_get_link_timer_ns-helper.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From f8fc363bf0c023e4736a0328174b4a24b44ab23a Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:10:37 +0100
-Subject: [PATCH 06/21] net: phylink: add phylink_get_link_timer_ns() helper
-
-Add a helper to convert the PHY interface mode to the required link
-timer setting as stated by the appropriate standard. Inappropriate
-interface modes return an error.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- include/linux/phylink.h | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -617,6 +617,30 @@ int phylink_speed_up(struct phylink *pl)
- 
- void phylink_set_port_modes(unsigned long *bits);
- 
-+/**
-+ * phylink_get_link_timer_ns - return the PCS link timer value
-+ * @interface: link &typedef phy_interface_t mode
-+ *
-+ * Return the PCS link timer setting in nanoseconds for the PHY @interface
-+ * mode, or -EINVAL if not appropriate.
-+ */
-+static inline int phylink_get_link_timer_ns(phy_interface_t interface)
-+{
-+	switch (interface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_QSGMII:
-+	case PHY_INTERFACE_MODE_USXGMII:
-+		return 1600000;
-+
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+		return 10000000;
-+
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
- void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state,
- 				      u16 bmsr, u16 lpa);
- void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
diff --git a/target/linux/generic/backport-6.1/715-07-v6.2-net-remove-explicit-phylink_generic_validate-referen.patch b/target/linux/generic/backport-6.1/715-07-v6.2-net-remove-explicit-phylink_generic_validate-referen.patch
deleted file mode 100644
index 90a29ccc3653..000000000000
--- a/target/linux/generic/backport-6.1/715-07-v6.2-net-remove-explicit-phylink_generic_validate-referen.patch
+++ /dev/null
@@ -1,250 +0,0 @@
-From b45b773a96b0e9e8d51e5d005485f4e376d6ce9a Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 4 Nov 2022 17:13:01 +0000
-Subject: [PATCH 07/21] net: remove explicit phylink_generic_validate()
- references
-
-Virtually all conventional network drivers are now converted to use
-phylink_generic_validate() - only DSA drivers and fman_memac remain,
-so lets remove the necessity for network drivers to explicitly set
-this member, and default to phylink_generic_validate() when unset.
-This is possible as .validate must currently be set.
-
-Any remaining instances that have not been addressed by this patch can
-be fixed up later.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Link: https://lore.kernel.org/r/E1or0FZ-001tRa-DI@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/altera/altera_tse_main.c            | 1 -
- drivers/net/ethernet/atheros/ag71xx.c                    | 1 -
- drivers/net/ethernet/cadence/macb_main.c                 | 1 -
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c         | 1 -
- drivers/net/ethernet/freescale/enetc/enetc_pf.c          | 1 -
- drivers/net/ethernet/freescale/fman/fman_dtsec.c         | 1 -
- drivers/net/ethernet/freescale/fman/fman_tgec.c          | 1 -
- drivers/net/ethernet/marvell/mvneta.c                    | 1 -
- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c          | 1 -
- drivers/net/ethernet/marvell/prestera/prestera_main.c    | 1 -
- drivers/net/ethernet/mediatek/mtk_eth_soc.c              | 1 -
- drivers/net/ethernet/microchip/lan966x/lan966x_phylink.c | 1 -
- drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c   | 1 -
- drivers/net/ethernet/mscc/ocelot_net.c                   | 1 -
- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c        | 1 -
- drivers/net/ethernet/ti/am65-cpsw-nuss.c                 | 1 -
- drivers/net/ethernet/xilinx/xilinx_axienet_main.c        | 1 -
- drivers/net/phy/phylink.c                                | 5 ++++-
- drivers/net/usb/asix_devices.c                           | 1 -
- include/linux/phylink.h                                  | 5 +++++
- 20 files changed, 9 insertions(+), 19 deletions(-)
-
---- a/drivers/net/ethernet/altera/altera_tse_main.c
-+++ b/drivers/net/ethernet/altera/altera_tse_main.c
-@@ -1096,7 +1096,6 @@ static struct phylink_pcs *alt_tse_selec
- }
- 
- static const struct phylink_mac_ops alt_tse_phylink_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_an_restart = alt_tse_mac_an_restart,
- 	.mac_config = alt_tse_mac_config,
- 	.mac_link_down = alt_tse_mac_link_down,
---- a/drivers/net/ethernet/atheros/ag71xx.c
-+++ b/drivers/net/ethernet/atheros/ag71xx.c
-@@ -1086,7 +1086,6 @@ static void ag71xx_mac_link_up(struct ph
- }
- 
- static const struct phylink_mac_ops ag71xx_phylink_mac_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_config = ag71xx_mac_config,
- 	.mac_link_down = ag71xx_mac_link_down,
- 	.mac_link_up = ag71xx_mac_link_up,
---- a/drivers/net/ethernet/cadence/macb_main.c
-+++ b/drivers/net/ethernet/cadence/macb_main.c
-@@ -752,7 +752,6 @@ static struct phylink_pcs *macb_mac_sele
- }
- 
- static const struct phylink_mac_ops macb_phylink_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = macb_mac_select_pcs,
- 	.mac_config = macb_mac_config,
- 	.mac_link_down = macb_mac_link_down,
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -235,7 +235,6 @@ static void dpaa2_mac_link_down(struct p
- }
- 
- static const struct phylink_mac_ops dpaa2_mac_phylink_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = dpaa2_mac_select_pcs,
- 	.mac_config = dpaa2_mac_config,
- 	.mac_link_up = dpaa2_mac_link_up,
---- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
-@@ -1111,7 +1111,6 @@ static void enetc_pl_mac_link_down(struc
- }
- 
- static const struct phylink_mac_ops enetc_mac_phylink_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = enetc_pl_mac_select_pcs,
- 	.mac_config = enetc_pl_mac_config,
- 	.mac_link_up = enetc_pl_mac_link_up,
---- a/drivers/net/ethernet/freescale/fman/fman_dtsec.c
-+++ b/drivers/net/ethernet/freescale/fman/fman_dtsec.c
-@@ -986,7 +986,6 @@ static void dtsec_link_down(struct phyli
- }
- 
- static const struct phylink_mac_ops dtsec_mac_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = dtsec_select_pcs,
- 	.mac_config = dtsec_mac_config,
- 	.mac_link_up = dtsec_link_up,
---- a/drivers/net/ethernet/freescale/fman/fman_tgec.c
-+++ b/drivers/net/ethernet/freescale/fman/fman_tgec.c
-@@ -469,7 +469,6 @@ static void tgec_link_down(struct phylin
- }
- 
- static const struct phylink_mac_ops tgec_mac_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_config = tgec_mac_config,
- 	.mac_link_up = tgec_link_up,
- 	.mac_link_down = tgec_link_down,
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4228,7 +4228,6 @@ static void mvneta_mac_link_up(struct ph
- }
- 
- static const struct phylink_mac_ops mvneta_phylink_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = mvneta_mac_select_pcs,
- 	.mac_prepare = mvneta_mac_prepare,
- 	.mac_config = mvneta_mac_config,
---- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
-+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
-@@ -6633,7 +6633,6 @@ static void mvpp2_mac_link_down(struct p
- }
- 
- static const struct phylink_mac_ops mvpp2_phylink_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = mvpp2_select_pcs,
- 	.mac_prepare = mvpp2_mac_prepare,
- 	.mac_config = mvpp2_mac_config,
---- a/drivers/net/ethernet/marvell/prestera/prestera_main.c
-+++ b/drivers/net/ethernet/marvell/prestera/prestera_main.c
-@@ -360,7 +360,6 @@ static void prestera_pcs_an_restart(stru
- }
- 
- static const struct phylink_mac_ops prestera_mac_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = prestera_mac_select_pcs,
- 	.mac_config = prestera_mac_config,
- 	.mac_link_down = prestera_mac_link_down,
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -653,7 +653,6 @@ static void mtk_mac_link_up(struct phyli
- }
- 
- static const struct phylink_mac_ops mtk_phylink_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = mtk_mac_select_pcs,
- 	.mac_pcs_get_state = mtk_mac_pcs_get_state,
- 	.mac_config = mtk_mac_config,
---- a/drivers/net/ethernet/microchip/lan966x/lan966x_phylink.c
-+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_phylink.c
-@@ -125,7 +125,6 @@ static void lan966x_pcs_aneg_restart(str
- }
- 
- const struct phylink_mac_ops lan966x_phylink_mac_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = lan966x_phylink_mac_select,
- 	.mac_config = lan966x_phylink_mac_config,
- 	.mac_prepare = lan966x_phylink_mac_prepare,
---- a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
-+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
-@@ -138,7 +138,6 @@ const struct phylink_pcs_ops sparx5_phyl
- };
- 
- const struct phylink_mac_ops sparx5_phylink_mac_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = sparx5_phylink_mac_select_pcs,
- 	.mac_config = sparx5_phylink_mac_config,
- 	.mac_link_down = sparx5_phylink_mac_link_down,
---- a/drivers/net/ethernet/mscc/ocelot_net.c
-+++ b/drivers/net/ethernet/mscc/ocelot_net.c
-@@ -1737,7 +1737,6 @@ static void vsc7514_phylink_mac_link_up(
- }
- 
- static const struct phylink_mac_ops ocelot_phylink_ops = {
--	.validate		= phylink_generic_validate,
- 	.mac_config		= vsc7514_phylink_mac_config,
- 	.mac_link_down		= vsc7514_phylink_mac_link_down,
- 	.mac_link_up		= vsc7514_phylink_mac_link_up,
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -1090,7 +1090,6 @@ static void stmmac_mac_link_up(struct ph
- }
- 
- static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = stmmac_mac_select_pcs,
- 	.mac_config = stmmac_mac_config,
- 	.mac_link_down = stmmac_mac_link_down,
---- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
-+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
-@@ -1493,7 +1493,6 @@ static void am65_cpsw_nuss_mac_link_up(s
- }
- 
- static const struct phylink_mac_ops am65_cpsw_phylink_mac_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_config = am65_cpsw_nuss_mac_config,
- 	.mac_link_down = am65_cpsw_nuss_mac_link_down,
- 	.mac_link_up = am65_cpsw_nuss_mac_link_up,
---- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
-@@ -1737,7 +1737,6 @@ static void axienet_mac_link_up(struct p
- }
- 
- static const struct phylink_mac_ops axienet_phylink_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_select_pcs = axienet_mac_select_pcs,
- 	.mac_config = axienet_mac_config,
- 	.mac_link_down = axienet_mac_link_down,
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -651,7 +651,10 @@ static int phylink_validate_mac_and_pcs(
- 	}
- 
- 	/* Then validate the link parameters with the MAC */
--	pl->mac_ops->validate(pl->config, supported, state);
-+	if (pl->mac_ops->validate)
-+		pl->mac_ops->validate(pl->config, supported, state);
-+	else
-+		phylink_generic_validate(pl->config, supported, state);
- 
- 	return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
- }
---- a/drivers/net/usb/asix_devices.c
-+++ b/drivers/net/usb/asix_devices.c
-@@ -787,7 +787,6 @@ static void ax88772_mac_link_up(struct p
- }
- 
- static const struct phylink_mac_ops ax88772_phylink_mac_ops = {
--	.validate = phylink_generic_validate,
- 	.mac_config = ax88772_mac_config,
- 	.mac_link_down = ax88772_mac_link_down,
- 	.mac_link_up = ax88772_mac_link_up,
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -207,6 +207,11 @@ struct phylink_mac_ops {
-  *
-  * If the @state->interface mode is not supported, then the @supported
-  * mask must be cleared.
-+ *
-+ * This member is optional; if not set, the generic validator will be
-+ * used making use of @config->mac_capabilities and
-+ * @config->supported_interfaces to determine which link modes are
-+ * supported.
-  */
- void validate(struct phylink_config *config, unsigned long *supported,
- 	      struct phylink_link_state *state);
diff --git a/target/linux/generic/backport-6.1/715-08-net-sfp-make-sfp_bus_find_fwnode-take-a-const-fwnode.patch b/target/linux/generic/backport-6.1/715-08-net-sfp-make-sfp_bus_find_fwnode-take-a-const-fwnode.patch
deleted file mode 100644
index 37d82b2cd7db..000000000000
--- a/target/linux/generic/backport-6.1/715-08-net-sfp-make-sfp_bus_find_fwnode-take-a-const-fwnode.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From a90ac762d345890b40d88a1385a34a2449c2d75e Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 24 Mar 2023 09:23:42 +0000
-Subject: [PATCH] net: sfp: make sfp_bus_find_fwnode() take a const fwnode
-
-sfp_bus_find_fwnode() does not write to the fwnode, so let's make it
-const.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/sfp-bus.c | 2 +-
- include/linux/sfp.h       | 5 +++--
- 2 files changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -603,7 +603,7 @@ static void sfp_upstream_clear(struct sf
-  *	- %-ENOMEM if we failed to allocate the bus.
-  *	- an error from the upstream's connect_phy() method.
-  */
--struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
-+struct sfp_bus *sfp_bus_find_fwnode(const struct fwnode_handle *fwnode)
- {
- 	struct fwnode_reference_args ref;
- 	struct sfp_bus *bus;
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -548,7 +548,7 @@ int sfp_get_module_eeprom_by_page(struct
- void sfp_upstream_start(struct sfp_bus *bus);
- void sfp_upstream_stop(struct sfp_bus *bus);
- void sfp_bus_put(struct sfp_bus *bus);
--struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode);
-+struct sfp_bus *sfp_bus_find_fwnode(const struct fwnode_handle *fwnode);
- int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
- 			 const struct sfp_upstream_ops *ops);
- void sfp_bus_del_upstream(struct sfp_bus *bus);
-@@ -610,7 +610,8 @@ static inline void sfp_bus_put(struct sf
- {
- }
- 
--static inline struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
-+static inline struct sfp_bus *
-+sfp_bus_find_fwnode(const struct fwnode_handle *fwnode)
- {
- 	return NULL;
- }
diff --git a/target/linux/generic/backport-6.1/715-09-v6.4-net-pcs-lynx-don-t-print-an_enabled-in-pcs_get_state.patch b/target/linux/generic/backport-6.1/715-09-v6.4-net-pcs-lynx-don-t-print-an_enabled-in-pcs_get_state.patch
deleted file mode 100644
index 290cb8d161d6..000000000000
--- a/target/linux/generic/backport-6.1/715-09-v6.4-net-pcs-lynx-don-t-print-an_enabled-in-pcs_get_state.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From ecec0ebbc6381a5a375f1cf10c4858f24e91e2ef Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Wed, 15 Mar 2023 14:46:49 +0000
-Subject: [PATCH] net: pcs: lynx: don't print an_enabled in pcs_get_state()
-
-an_enabled will be going away, and in any case, pcs_get_state() should
-not be updating this member. Remove the print.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/pcs/pcs-lynx.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/pcs/pcs-lynx.c
-+++ b/drivers/net/pcs/pcs-lynx.c
-@@ -115,11 +115,11 @@ static void lynx_pcs_get_state(struct ph
- 	}
- 
- 	dev_dbg(&lynx->mdio->dev,
--		"mode=%s/%s/%s link=%u an_enabled=%u an_complete=%u\n",
-+		"mode=%s/%s/%s link=%u an_complete=%u\n",
- 		phy_modes(state->interface),
- 		phy_speed_to_str(state->speed),
- 		phy_duplex_to_str(state->duplex),
--		state->link, state->an_enabled, state->an_complete);
-+		state->link, state->an_complete);
- }
- 
- static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
diff --git a/target/linux/generic/backport-6.1/715-10-v6.4-net-dpaa2-mac-use-Autoneg-bit-rather-than-an_enabled.patch b/target/linux/generic/backport-6.1/715-10-v6.4-net-dpaa2-mac-use-Autoneg-bit-rather-than-an_enabled.patch
deleted file mode 100644
index 38ea26547607..000000000000
--- a/target/linux/generic/backport-6.1/715-10-v6.4-net-dpaa2-mac-use-Autoneg-bit-rather-than-an_enabled.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 99d0f3a1095f4c938b1665025c29411edafe8a01 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Tue, 21 Mar 2023 15:58:44 +0000
-Subject: [PATCH] net: dpaa2-mac: use Autoneg bit rather than an_enabled
-
-The Autoneg bit in the advertising bitmap and state->an_enabled are
-always identical. Thus, we will be removing state->an_enabled.
-
-Use the Autoneg bit in the advertising bitmap to indicate whether
-autonegotiation should be used, rather than using the an_enabled
-member which will be going away. This means we use the same condition
-as phylink_mii_c22_pcs_config().
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -158,7 +158,8 @@ static void dpaa2_mac_config(struct phyl
- 	struct dpmac_link_state *dpmac_state = &mac->state;
- 	int err;
- 
--	if (state->an_enabled)
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+			      state->advertising))
- 		dpmac_state->options |= DPMAC_LINK_OPT_AUTONEG;
- 	else
- 		dpmac_state->options &= ~DPMAC_LINK_OPT_AUTONEG;
diff --git a/target/linux/generic/backport-6.1/715-11-v6.4-net-phylink-support-validated-pause-and-autoneg-in-f.patch b/target/linux/generic/backport-6.1/715-11-v6.4-net-phylink-support-validated-pause-and-autoneg-in-f.patch
deleted file mode 100644
index cb9c411cfb0d..000000000000
--- a/target/linux/generic/backport-6.1/715-11-v6.4-net-phylink-support-validated-pause-and-autoneg-in-f.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 471c40bde606ec0b1ce8c616f7998739c7a783a6 Mon Sep 17 00:00:00 2001
-From: Ivan Bornyakov <i.bornyakov@metrotek.ru>
-Date: Fri, 10 Feb 2023 18:46:27 +0300
-Subject: [PATCH 10/21] net: phylink: support validated pause and autoneg in
- fixed-link
-
-In fixed-link setup phylink_parse_fixedlink() unconditionally sets
-Pause, Asym_Pause and Autoneg bits to "supported" bitmap, while MAC may
-not support these.
-
-This leads to ethtool reporting:
-
- > Supported pause frame use: Symmetric Receive-only
- > Supports auto-negotiation: Yes
-
-regardless of what is actually supported.
-
-Instead of unconditionally set Pause, Asym_Pause and Autoneg it is
-sensible to set them according to validated "supported" bitmap, i.e. the
-result of phylink_validate().
-
-Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phylink.c | 17 ++++++++++++++---
- 1 file changed, 14 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -709,6 +709,7 @@ static int phylink_parse_fixedlink(struc
- 				   struct fwnode_handle *fwnode)
- {
- 	struct fwnode_handle *fixed_node;
-+	bool pause, asym_pause, autoneg;
- 	const struct phy_setting *s;
- 	struct gpio_desc *desc;
- 	u32 speed;
-@@ -781,13 +782,23 @@ static int phylink_parse_fixedlink(struc
- 	linkmode_copy(pl->link_config.advertising, pl->supported);
- 	phylink_validate(pl, pl->supported, &pl->link_config);
- 
-+	pause = phylink_test(pl->supported, Pause);
-+	asym_pause = phylink_test(pl->supported, Asym_Pause);
-+	autoneg = phylink_test(pl->supported, Autoneg);
- 	s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
- 			       pl->supported, true);
- 	linkmode_zero(pl->supported);
- 	phylink_set(pl->supported, MII);
--	phylink_set(pl->supported, Pause);
--	phylink_set(pl->supported, Asym_Pause);
--	phylink_set(pl->supported, Autoneg);
-+
-+	if (pause)
-+		phylink_set(pl->supported, Pause);
-+
-+	if (asym_pause)
-+		phylink_set(pl->supported, Asym_Pause);
-+
-+	if (autoneg)
-+		phylink_set(pl->supported, Autoneg);
-+
- 	if (s) {
- 		__set_bit(s->bit, pl->supported);
- 		__set_bit(s->bit, pl->link_config.lp_advertising);
diff --git a/target/linux/generic/backport-6.1/715-12-v6.4-net-phylink-remove-an_enabled.patch b/target/linux/generic/backport-6.1/715-12-v6.4-net-phylink-remove-an_enabled.patch
deleted file mode 100644
index 03b4f9d0c4cc..000000000000
--- a/target/linux/generic/backport-6.1/715-12-v6.4-net-phylink-remove-an_enabled.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From 7211ffd70941933a7825a56cf480f07ee81c321c Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Tue, 21 Mar 2023 15:58:54 +0000
-Subject: [PATCH 11/21] net: phylink: remove an_enabled
-
-The Autoneg bit in the advertising bitmap and state->an_enabled are
-always identical. state->an_enabled is now no longer used by any
-drivers, so lets kill this duplication.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 37 +++++++++++++++++--------------------
- include/linux/phylink.h   |  2 --
- 2 files changed, 17 insertions(+), 22 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -841,7 +841,6 @@ static int phylink_parse_mode(struct phy
- 		phylink_set(pl->supported, Autoneg);
- 		phylink_set(pl->supported, Asym_Pause);
- 		phylink_set(pl->supported, Pause);
--		pl->link_config.an_enabled = true;
- 		pl->cfg_link_an_mode = MLO_AN_INBAND;
- 
- 		switch (pl->link_config.interface) {
-@@ -944,9 +943,6 @@ static int phylink_parse_mode(struct phy
- 				    "failed to validate link configuration for in-band status\n");
- 			return -EINVAL;
- 		}
--
--		/* Check if MAC/PCS also supports Autoneg. */
--		pl->link_config.an_enabled = phylink_test(pl->supported, Autoneg);
- 	}
- 
- 	return 0;
-@@ -956,7 +952,8 @@ static void phylink_apply_manual_flow(st
- 				      struct phylink_link_state *state)
- {
- 	/* If autoneg is disabled, pause AN is also disabled */
--	if (!state->an_enabled)
-+	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+			       state->advertising))
- 		state->pause &= ~MLO_PAUSE_AN;
- 
- 	/* Manual configuration of pause modes */
-@@ -996,21 +993,22 @@ static void phylink_mac_config(struct ph
- 			       const struct phylink_link_state *state)
- {
- 	phylink_dbg(pl,
--		    "%s: mode=%s/%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
-+		    "%s: mode=%s/%s/%s/%s/%s adv=%*pb pause=%02x link=%u\n",
- 		    __func__, phylink_an_mode_str(pl->cur_link_an_mode),
- 		    phy_modes(state->interface),
- 		    phy_speed_to_str(state->speed),
- 		    phy_duplex_to_str(state->duplex),
- 		    phy_rate_matching_to_str(state->rate_matching),
- 		    __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
--		    state->pause, state->link, state->an_enabled);
-+		    state->pause, state->link);
- 
- 	pl->mac_ops->mac_config(pl->config, pl->cur_link_an_mode, state);
- }
- 
- static void phylink_mac_pcs_an_restart(struct phylink *pl)
- {
--	if (pl->link_config.an_enabled &&
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+			      pl->link_config.advertising) &&
- 	    phy_interface_mode_is_8023z(pl->link_config.interface) &&
- 	    phylink_autoneg_inband(pl->cur_link_an_mode)) {
- 		if (pl->pcs)
-@@ -1137,9 +1135,9 @@ static void phylink_mac_pcs_get_state(st
- 	linkmode_copy(state->advertising, pl->link_config.advertising);
- 	linkmode_zero(state->lp_advertising);
- 	state->interface = pl->link_config.interface;
--	state->an_enabled = pl->link_config.an_enabled;
- 	state->rate_matching = pl->link_config.rate_matching;
--	if (state->an_enabled) {
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+			      state->advertising)) {
- 		state->speed = SPEED_UNKNOWN;
- 		state->duplex = DUPLEX_UNKNOWN;
- 		state->pause = MLO_PAUSE_NONE;
-@@ -1531,7 +1529,6 @@ struct phylink *phylink_create(struct ph
- 	pl->link_config.pause = MLO_PAUSE_AN;
- 	pl->link_config.speed = SPEED_UNKNOWN;
- 	pl->link_config.duplex = DUPLEX_UNKNOWN;
--	pl->link_config.an_enabled = true;
- 	pl->mac_ops = mac_ops;
- 	__set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
- 	timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
-@@ -2155,8 +2152,9 @@ static void phylink_get_ksettings(const
- 		kset->base.speed = state->speed;
- 		kset->base.duplex = state->duplex;
- 	}
--	kset->base.autoneg = state->an_enabled ? AUTONEG_ENABLE :
--				AUTONEG_DISABLE;
-+	kset->base.autoneg = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+					       state->advertising) ?
-+				AUTONEG_ENABLE : AUTONEG_DISABLE;
- }
- 
- /**
-@@ -2303,9 +2301,8 @@ int phylink_ethtool_ksettings_set(struct
- 	/* We have ruled out the case with a PHY attached, and the
- 	 * fixed-link cases.  All that is left are in-band links.
- 	 */
--	config.an_enabled = kset->base.autoneg == AUTONEG_ENABLE;
- 	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising,
--			 config.an_enabled);
-+			 kset->base.autoneg == AUTONEG_ENABLE);
- 
- 	/* If this link is with an SFP, ensure that changes to advertised modes
- 	 * also cause the associated interface to be selected such that the
-@@ -2339,13 +2336,14 @@ int phylink_ethtool_ksettings_set(struct
- 	}
- 
- 	/* If autonegotiation is enabled, we must have an advertisement */
--	if (config.an_enabled && phylink_is_empty_linkmode(config.advertising))
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+			      config.advertising) &&
-+	    phylink_is_empty_linkmode(config.advertising))
- 		return -EINVAL;
- 
- 	mutex_lock(&pl->state_mutex);
- 	pl->link_config.speed = config.speed;
- 	pl->link_config.duplex = config.duplex;
--	pl->link_config.an_enabled = config.an_enabled;
- 
- 	if (pl->link_config.interface != config.interface) {
- 		/* The interface changed, e.g. 1000base-X <-> 2500base-X */
-@@ -2951,7 +2949,6 @@ static int phylink_sfp_config_phy(struct
- 	config.speed = SPEED_UNKNOWN;
- 	config.duplex = DUPLEX_UNKNOWN;
- 	config.pause = MLO_PAUSE_AN;
--	config.an_enabled = pl->link_config.an_enabled;
- 
- 	/* Ignore errors if we're expecting a PHY to attach later */
- 	ret = phylink_validate(pl, support, &config);
-@@ -3020,7 +3017,6 @@ static int phylink_sfp_config_optical(st
- 	config.speed = SPEED_UNKNOWN;
- 	config.duplex = DUPLEX_UNKNOWN;
- 	config.pause = MLO_PAUSE_AN;
--	config.an_enabled = true;
- 
- 	/* For all the interfaces that are supported, reduce the sfp_support
- 	 * mask to only those link modes that can be supported.
-@@ -3354,7 +3350,8 @@ void phylink_mii_c22_pcs_decode_state(st
- 	/* If there is no link or autonegotiation is disabled, the LP advertisement
- 	 * data is not meaningful, so don't go any further.
- 	 */
--	if (!state->link || !state->an_enabled)
-+	if (!state->link || !linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+					       state->advertising))
- 		return;
- 
- 	switch (state->interface) {
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -93,7 +93,6 @@ static inline bool phylink_autoneg_inban
-  *   the medium link mode (@speed and @duplex) and the speed/duplex of the phy
-  *   interface mode (@interface) are different.
-  * @link: true if the link is up.
-- * @an_enabled: true if autonegotiation is enabled/desired.
-  * @an_complete: true if autonegotiation has completed.
-  */
- struct phylink_link_state {
-@@ -105,7 +104,6 @@ struct phylink_link_state {
- 	int pause;
- 	int rate_matching;
- 	unsigned int link:1;
--	unsigned int an_enabled:1;
- 	unsigned int an_complete:1;
- };
- 
diff --git a/target/linux/generic/backport-6.1/715-13-v6.5-net-phylink-constify-fwnode-arguments.patch b/target/linux/generic/backport-6.1/715-13-v6.5-net-phylink-constify-fwnode-arguments.patch
deleted file mode 100644
index c06a367b8be3..000000000000
--- a/target/linux/generic/backport-6.1/715-13-v6.5-net-phylink-constify-fwnode-arguments.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From a3555d1f5c208f0a63eafee77381f68d304a0512 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 12 May 2023 17:58:37 +0100
-Subject: [PATCH 12/21] net: phylink: constify fwnode arguments
-
-Both phylink_create() and phylink_fwnode_phy_connect() do not modify
-the fwnode argument that they are passed, so lets constify these.
-
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phylink.c | 11 ++++++-----
- include/linux/phylink.h   |  9 +++++----
- 2 files changed, 11 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -706,7 +706,7 @@ static int phylink_validate(struct phyli
- }
- 
- static int phylink_parse_fixedlink(struct phylink *pl,
--				   struct fwnode_handle *fwnode)
-+				   const struct fwnode_handle *fwnode)
- {
- 	struct fwnode_handle *fixed_node;
- 	bool pause, asym_pause, autoneg;
-@@ -817,7 +817,8 @@ static int phylink_parse_fixedlink(struc
- 	return 0;
- }
- 
--static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
-+static int phylink_parse_mode(struct phylink *pl,
-+			      const struct fwnode_handle *fwnode)
- {
- 	struct fwnode_handle *dn;
- 	const char *managed;
-@@ -1440,7 +1441,7 @@ static void phylink_fixed_poll(struct ti
- static const struct sfp_upstream_ops sfp_phylink_ops;
- 
- static int phylink_register_sfp(struct phylink *pl,
--				struct fwnode_handle *fwnode)
-+				const struct fwnode_handle *fwnode)
- {
- 	struct sfp_bus *bus;
- 	int ret;
-@@ -1479,7 +1480,7 @@ static int phylink_register_sfp(struct p
-  * must use IS_ERR() to check for errors from this function.
-  */
- struct phylink *phylink_create(struct phylink_config *config,
--			       struct fwnode_handle *fwnode,
-+			       const struct fwnode_handle *fwnode,
- 			       phy_interface_t iface,
- 			       const struct phylink_mac_ops *mac_ops)
- {
-@@ -1809,7 +1810,7 @@ EXPORT_SYMBOL_GPL(phylink_of_phy_connect
-  * Returns 0 on success or a negative errno.
-  */
- int phylink_fwnode_phy_connect(struct phylink *pl,
--			       struct fwnode_handle *fwnode,
-+			       const struct fwnode_handle *fwnode,
- 			       u32 flags)
- {
- 	struct fwnode_handle *phy_fwnode;
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -568,16 +568,17 @@ void phylink_generic_validate(struct phy
- 			      unsigned long *supported,
- 			      struct phylink_link_state *state);
- 
--struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
--			       phy_interface_t iface,
--			       const struct phylink_mac_ops *mac_ops);
-+struct phylink *phylink_create(struct phylink_config *,
-+			       const struct fwnode_handle *,
-+			       phy_interface_t,
-+			       const struct phylink_mac_ops *);
- void phylink_destroy(struct phylink *);
- bool phylink_expects_phy(struct phylink *pl);
- 
- int phylink_connect_phy(struct phylink *, struct phy_device *);
- int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
- int phylink_fwnode_phy_connect(struct phylink *pl,
--			       struct fwnode_handle *fwnode,
-+			       const struct fwnode_handle *fwnode,
- 			       u32 flags);
- void phylink_disconnect_phy(struct phylink *);
- 
diff --git a/target/linux/generic/backport-6.1/715-14-v6.3-net-phy-constify-fwnode_get_phy_node-fwnode-argument.patch b/target/linux/generic/backport-6.1/715-14-v6.3-net-phy-constify-fwnode_get_phy_node-fwnode-argument.patch
deleted file mode 100644
index 2649634dc7ba..000000000000
--- a/target/linux/generic/backport-6.1/715-14-v6.3-net-phy-constify-fwnode_get_phy_node-fwnode-argument.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4a0faa02d419a6728abef0f1d8a32d8c35ef95e6 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 24 Mar 2023 09:23:53 +0000
-Subject: [PATCH] net: phy: constify fwnode_get_phy_node() fwnode argument
-
-fwnode_get_phy_node() does not motify the fwnode structure, so make
-the argument const,
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy_device.c | 2 +-
- include/linux/phy.h          | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -3003,7 +3003,7 @@ EXPORT_SYMBOL_GPL(device_phy_find_device
-  * and "phy-device" are not supported in ACPI. DT supports all the three
-  * named references to the phy node.
-  */
--struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
-+struct fwnode_handle *fwnode_get_phy_node(const struct fwnode_handle *fwnode)
- {
- 	struct fwnode_handle *phy_node;
- 
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -1473,7 +1473,7 @@ int fwnode_get_phy_id(struct fwnode_hand
- struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
- struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
- struct phy_device *device_phy_find_device(struct device *dev);
--struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode);
-+struct fwnode_handle *fwnode_get_phy_node(const struct fwnode_handle *fwnode);
- struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
- int phy_device_register(struct phy_device *phy);
- void phy_device_free(struct phy_device *phydev);
diff --git a/target/linux/generic/backport-6.1/715-15-v6.4-net-phylink-fix-ksettings_set-ethtool-call.patch b/target/linux/generic/backport-6.1/715-15-v6.4-net-phylink-fix-ksettings_set-ethtool-call.patch
deleted file mode 100644
index 5eba18b02605..000000000000
--- a/target/linux/generic/backport-6.1/715-15-v6.4-net-phylink-fix-ksettings_set-ethtool-call.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From cc73de0411f7d3cdd157564a78f7a39058420ff8 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Sat, 13 May 2023 22:03:45 +0100
-Subject: [PATCH 13/21] net: phylink: fix ksettings_set() ethtool call
-
-While testing a Fiberstore SFP-10G-T module (which uses 10GBASE-R with
-rate adaption) in a Clearfog platform (which can't do that) it was
-found that the PHYs advertisement was not limited according to the
-hosts capabilities when using ethtool to change it.
-
-Fix this by ensuring that we mask the advertisement with the computed
-support mask as the very first thing we do.
-
-Fixes: cbc1bb1e4689 ("net: phylink: simplify phy case for ksettings_set method")
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phylink.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -2226,6 +2226,10 @@ int phylink_ethtool_ksettings_set(struct
- 
- 	ASSERT_RTNL();
- 
-+	/* Mask out unsupported advertisements */
-+	linkmode_and(config.advertising, kset->link_modes.advertising,
-+		     pl->supported);
-+
- 	if (pl->phydev) {
- 		/* We can rely on phylib for this update; we also do not need
- 		 * to update the pl->link_config settings:
-@@ -2250,10 +2254,6 @@ int phylink_ethtool_ksettings_set(struct
- 
- 	config = pl->link_config;
- 
--	/* Mask out unsupported advertisements */
--	linkmode_and(config.advertising, kset->link_modes.advertising,
--		     pl->supported);
--
- 	/* FIXME: should we reject autoneg if phy/mac does not support it? */
- 	switch (kset->base.autoneg) {
- 	case AUTONEG_DISABLE:
diff --git a/target/linux/generic/backport-6.1/715-16-v6.5-net-sfp-add-support-for-setting-signalling-rate.patch b/target/linux/generic/backport-6.1/715-16-v6.5-net-sfp-add-support-for-setting-signalling-rate.patch
deleted file mode 100644
index f9670539fca9..000000000000
--- a/target/linux/generic/backport-6.1/715-16-v6.5-net-sfp-add-support-for-setting-signalling-rate.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 0100d1c5789018ba77bf2f4fab3bd91ecece7b3b Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Wed, 17 May 2023 11:38:12 +0100
-Subject: [PATCH 14/21] net: sfp: add support for setting signalling rate
-
-Add support to the SFP layer to allow phylink to set the signalling
-rate for a SFP module. The rate given will be in units of kilo-baud
-(1000 baud).
-
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 24 ++++++++++++++++++++++++
- drivers/net/phy/sfp-bus.c | 20 ++++++++++++++++++++
- drivers/net/phy/sfp.c     |  5 +++++
- drivers/net/phy/sfp.h     |  1 +
- include/linux/sfp.h       |  6 ++++++
- 5 files changed, 56 insertions(+)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -156,6 +156,23 @@ static const char *phylink_an_mode_str(u
- 	return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
- }
- 
-+static unsigned int phylink_interface_signal_rate(phy_interface_t interface)
-+{
-+	switch (interface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_1000BASEX: /* 1.25Mbd */
-+		return 1250;
-+	case PHY_INTERFACE_MODE_2500BASEX: /* 3.125Mbd */
-+		return 3125;
-+	case PHY_INTERFACE_MODE_5GBASER: /* 5.15625Mbd */
-+		return 5156;
-+	case PHY_INTERFACE_MODE_10GBASER: /* 10.3125Mbd */
-+		return 10313;
-+	default:
-+		return 0;
-+	}
-+}
-+
- /**
-  * phylink_interface_max_speed() - get the maximum speed of a phy interface
-  * @interface: phy interface mode defined by &typedef phy_interface_t
-@@ -1024,6 +1041,7 @@ static void phylink_major_config(struct
- {
- 	struct phylink_pcs *pcs = NULL;
- 	bool pcs_changed = false;
-+	unsigned int rate_kbd;
- 	int err;
- 
- 	phylink_dbg(pl, "major config %s\n", phy_modes(state->interface));
-@@ -1083,6 +1101,12 @@ static void phylink_major_config(struct
- 				    ERR_PTR(err));
- 	}
- 
-+	if (pl->sfp_bus) {
-+		rate_kbd = phylink_interface_signal_rate(state->interface);
-+		if (rate_kbd)
-+			sfp_upstream_set_signal_rate(pl->sfp_bus, rate_kbd);
-+	}
-+
- 	phylink_pcs_poll_start(pl);
- }
- 
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -586,6 +586,26 @@ static void sfp_upstream_clear(struct sf
- }
- 
- /**
-+ * sfp_upstream_set_signal_rate() - set data signalling rate
-+ * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-+ * @rate_kbd: signalling rate in units of 1000 baud
-+ *
-+ * Configure the rate select settings on the SFP module for the signalling
-+ * rate (not the same as the data rate).
-+ *
-+ * Locks that may be held:
-+ *  Phylink's state_mutex
-+ *  rtnl lock
-+ *  SFP's sm_mutex
-+ */
-+void sfp_upstream_set_signal_rate(struct sfp_bus *bus, unsigned int rate_kbd)
-+{
-+	if (bus->registered)
-+		bus->socket_ops->set_signal_rate(bus->sfp, rate_kbd);
-+}
-+EXPORT_SYMBOL_GPL(sfp_upstream_set_signal_rate);
-+
-+/**
-  * sfp_bus_find_fwnode() - parse and locate the SFP bus from fwnode
-  * @fwnode: firmware node for the parent device (MAC or PHY)
-  *
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -2473,6 +2473,10 @@ static void sfp_stop(struct sfp *sfp)
- 	sfp_sm_event(sfp, SFP_E_DEV_DOWN);
- }
- 
-+static void sfp_set_signal_rate(struct sfp *sfp, unsigned int rate_kbd)
-+{
-+}
-+
- static int sfp_module_info(struct sfp *sfp, struct ethtool_modinfo *modinfo)
- {
- 	/* locking... and check module is present */
-@@ -2551,6 +2555,7 @@ static const struct sfp_socket_ops sfp_m
- 	.detach = sfp_detach,
- 	.start = sfp_start,
- 	.stop = sfp_stop,
-+	.set_signal_rate = sfp_set_signal_rate,
- 	.module_info = sfp_module_info,
- 	.module_eeprom = sfp_module_eeprom,
- 	.module_eeprom_by_page = sfp_module_eeprom_by_page,
---- a/drivers/net/phy/sfp.h
-+++ b/drivers/net/phy/sfp.h
-@@ -19,6 +19,7 @@ struct sfp_socket_ops {
- 	void (*detach)(struct sfp *sfp);
- 	void (*start)(struct sfp *sfp);
- 	void (*stop)(struct sfp *sfp);
-+	void (*set_signal_rate)(struct sfp *sfp, unsigned int rate_kbd);
- 	int (*module_info)(struct sfp *sfp, struct ethtool_modinfo *modinfo);
- 	int (*module_eeprom)(struct sfp *sfp, struct ethtool_eeprom *ee,
- 			     u8 *data);
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -547,6 +547,7 @@ int sfp_get_module_eeprom_by_page(struct
- 				  struct netlink_ext_ack *extack);
- void sfp_upstream_start(struct sfp_bus *bus);
- void sfp_upstream_stop(struct sfp_bus *bus);
-+void sfp_upstream_set_signal_rate(struct sfp_bus *bus, unsigned int rate_kbd);
- void sfp_bus_put(struct sfp_bus *bus);
- struct sfp_bus *sfp_bus_find_fwnode(const struct fwnode_handle *fwnode);
- int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-@@ -606,6 +607,11 @@ static inline void sfp_upstream_stop(str
- {
- }
- 
-+static inline void sfp_upstream_set_signal_rate(struct sfp_bus *bus,
-+						unsigned int rate_kbd)
-+{
-+}
-+
- static inline void sfp_bus_put(struct sfp_bus *bus)
- {
- }
diff --git a/target/linux/generic/backport-6.1/715-17-v6.5-net-phy-add-helpers-for-comparing-phy-IDs.patch b/target/linux/generic/backport-6.1/715-17-v6.5-net-phy-add-helpers-for-comparing-phy-IDs.patch
deleted file mode 100644
index 8a694c86dafc..000000000000
--- a/target/linux/generic/backport-6.1/715-17-v6.5-net-phy-add-helpers-for-comparing-phy-IDs.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From b84acdb07222a701bfc6403b374249c86f97d18d Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 19 May 2023 14:03:59 +0100
-Subject: [PATCH 15/21] net: phy: add helpers for comparing phy IDs
-
-There are several places which open code comparing PHY IDs. Provide a
-couple of helpers to assist with this, using a slightly simpler test
-than the original:
-
-- phy_id_compare() compares two arbitary PHY IDs and a mask of the
-  significant bits in the ID.
-- phydev_id_compare() compares the bound phydev with the specified
-  PHY ID, using the bound driver's mask.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/micrel.c     |  6 +++---
- drivers/net/phy/phy_device.c | 16 +++++++---------
- drivers/net/phy/phylink.c    |  4 ++--
- include/linux/phy.h          | 28 ++++++++++++++++++++++++++++
- 4 files changed, 40 insertions(+), 14 deletions(-)
-
---- a/drivers/net/phy/micrel.c
-+++ b/drivers/net/phy/micrel.c
-@@ -620,7 +620,7 @@ static int ksz8051_ksz8795_match_phy_dev
- {
- 	int ret;
- 
--	if ((phydev->phy_id & MICREL_PHY_ID_MASK) != PHY_ID_KSZ8051)
-+	if (!phy_id_compare(phydev->phy_id, PHY_ID_KSZ8051, MICREL_PHY_ID_MASK))
- 		return 0;
- 
- 	ret = phy_read(phydev, MII_BMSR);
-@@ -1455,7 +1455,7 @@ static int ksz9x31_cable_test_fault_leng
- 	 *
- 	 * distance to fault = (VCT_DATA - 22) * 4 / cable propagation velocity
- 	 */
--	if ((phydev->phy_id & MICREL_PHY_ID_MASK) == PHY_ID_KSZ9131)
-+	if (phydev_id_compare(phydev, PHY_ID_KSZ9131))
- 		dt = clamp(dt - 22, 0, 255);
- 
- 	return (dt * 400) / 10;
-@@ -1887,7 +1887,7 @@ static __always_inline int ksz886x_cable
- 	 */
- 	dt = FIELD_GET(data_mask, status);
- 
--	if ((phydev->phy_id & MICREL_PHY_ID_MASK) == PHY_ID_LAN8814)
-+	if (phydev_id_compare(phydev, PHY_ID_LAN8814))
- 		return ((dt - 22) * 800) / 10;
- 	else
- 		return (dt * 400) / 10;
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -422,8 +422,7 @@ int phy_unregister_fixup(const char *bus
- 		fixup = list_entry(pos, struct phy_fixup, list);
- 
- 		if ((!strcmp(fixup->bus_id, bus_id)) &&
--		    ((fixup->phy_uid & phy_uid_mask) ==
--		     (phy_uid & phy_uid_mask))) {
-+		    phy_id_compare(fixup->phy_uid, phy_uid, phy_uid_mask)) {
- 			list_del(&fixup->list);
- 			kfree(fixup);
- 			ret = 0;
-@@ -459,8 +458,8 @@ static int phy_needs_fixup(struct phy_de
- 		if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
- 			return 0;
- 
--	if ((fixup->phy_uid & fixup->phy_uid_mask) !=
--	    (phydev->phy_id & fixup->phy_uid_mask))
-+	if (!phy_id_compare(phydev->phy_id, fixup->phy_uid,
-+			    fixup->phy_uid_mask))
- 		if (fixup->phy_uid != PHY_ANY_UID)
- 			return 0;
- 
-@@ -507,15 +506,14 @@ static int phy_bus_match(struct device *
- 			if (phydev->c45_ids.device_ids[i] == 0xffffffff)
- 				continue;
- 
--			if ((phydrv->phy_id & phydrv->phy_id_mask) ==
--			    (phydev->c45_ids.device_ids[i] &
--			     phydrv->phy_id_mask))
-+			if (phy_id_compare(phydev->c45_ids.device_ids[i],
-+					   phydrv->phy_id, phydrv->phy_id_mask))
- 				return 1;
- 		}
- 		return 0;
- 	} else {
--		return (phydrv->phy_id & phydrv->phy_id_mask) ==
--			(phydev->phy_id & phydrv->phy_id_mask);
-+		return phy_id_compare(phydev->phy_id, phydrv->phy_id,
-+				      phydrv->phy_id_mask);
- 	}
- }
- 
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -3151,8 +3151,8 @@ static void phylink_sfp_link_up(void *up
-  */
- static bool phylink_phy_no_inband(struct phy_device *phy)
- {
--	return phy->is_c45 &&
--		(phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
-+	return phy->is_c45 && phy_id_compare(phy->c45_ids.device_ids[1],
-+					     0xae025150, 0xfffffff0);
- }
- 
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -993,6 +993,34 @@ struct phy_driver {
- #define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4)
- #define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10)
- 
-+/**
-+ * phy_id_compare - compare @id1 with @id2 taking account of @mask
-+ * @id1: first PHY ID
-+ * @id2: second PHY ID
-+ * @mask: the PHY ID mask, set bits are significant in matching
-+ *
-+ * Return true if the bits from @id1 and @id2 specified by @mask match.
-+ * This uses an equivalent test to (@id & @mask) == (@phy_id & @mask).
-+ */
-+static inline bool phy_id_compare(u32 id1, u32 id2, u32 mask)
-+{
-+	return !((id1 ^ id2) & mask);
-+}
-+
-+/**
-+ * phydev_id_compare - compare @id with the PHY's Clause 22 ID
-+ * @phydev: the PHY device
-+ * @id: the PHY ID to be matched
-+ *
-+ * Compare the @phydev clause 22 ID with the provided @id and return true or
-+ * false depending whether it matches, using the bound driver mask. The
-+ * @phydev must be bound to a driver.
-+ */
-+static inline bool phydev_id_compare(struct phy_device *phydev, u32 id)
-+{
-+	return phy_id_compare(id, phydev->phy_id, phydev->drv->phy_id_mask);
-+}
-+
- /* A Structure for boards to register fixups with the PHY Lib */
- struct phy_fixup {
- 	struct list_head list;
diff --git a/target/linux/generic/backport-6.1/715-18-v6.5-net-phylink-require-supported_interfaces-to-be-fille.patch b/target/linux/generic/backport-6.1/715-18-v6.5-net-phylink-require-supported_interfaces-to-be-fille.patch
deleted file mode 100644
index 5970355a6c21..000000000000
--- a/target/linux/generic/backport-6.1/715-18-v6.5-net-phylink-require-supported_interfaces-to-be-fille.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 441e1e44301fc5762a06737f8ec04bf1ce3fb039 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Sat, 20 May 2023 11:41:42 +0100
-Subject: [PATCH 16/21] net: phylink: require supported_interfaces to be filled
-
-We have been requiring the supported_interfaces bitmap to be filled in
-by MAC drivers that have a mac_select_pcs() method. Now that all MAC
-drivers fill in the supported_interfaces bitmap, it is time to enforce
-this. We have already required supported_interfaces to be set in order
-for optical SFPs to be configured in commit f81fa96d8a6c ("net: phylink:
-use phy_interface_t bitmaps for optical modules").
-
-Refuse phylink creation if supported_interfaces is empty, and remove
-code to deal with cases where this mask is empty.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/E1q0K1u-006EIP-ET@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 26 +++++++++++---------------
- 1 file changed, 11 insertions(+), 15 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -710,14 +710,11 @@ static int phylink_validate(struct phyli
- {
- 	const unsigned long *interfaces = pl->config->supported_interfaces;
- 
--	if (!phy_interface_empty(interfaces)) {
--		if (state->interface == PHY_INTERFACE_MODE_NA)
--			return phylink_validate_mask(pl, supported, state,
--						     interfaces);
-+	if (state->interface == PHY_INTERFACE_MODE_NA)
-+		return phylink_validate_mask(pl, supported, state, interfaces);
- 
--		if (!test_bit(state->interface, interfaces))
--			return -EINVAL;
--	}
-+	if (!test_bit(state->interface, interfaces))
-+		return -EINVAL;
- 
- 	return phylink_validate_mac_and_pcs(pl, supported, state);
- }
-@@ -1512,19 +1509,18 @@ struct phylink *phylink_create(struct ph
- 	struct phylink *pl;
- 	int ret;
- 
--	if (mac_ops->mac_select_pcs &&
--	    mac_ops->mac_select_pcs(config, PHY_INTERFACE_MODE_NA) !=
--	      ERR_PTR(-EOPNOTSUPP))
--		using_mac_select_pcs = true;
--
- 	/* Validate the supplied configuration */
--	if (using_mac_select_pcs &&
--	    phy_interface_empty(config->supported_interfaces)) {
-+	if (phy_interface_empty(config->supported_interfaces)) {
- 		dev_err(config->dev,
--			"phylink: error: empty supported_interfaces but mac_select_pcs() method present\n");
-+			"phylink: error: empty supported_interfaces\n");
- 		return ERR_PTR(-EINVAL);
- 	}
- 
-+	if (mac_ops->mac_select_pcs &&
-+	    mac_ops->mac_select_pcs(config, PHY_INTERFACE_MODE_NA) !=
-+	      ERR_PTR(-EOPNOTSUPP))
-+		using_mac_select_pcs = true;
-+
- 	pl = kzalloc(sizeof(*pl), GFP_KERNEL);
- 	if (!pl)
- 		return ERR_PTR(-ENOMEM);
diff --git a/target/linux/generic/backport-6.1/715-19-v6.5-net-phylink-remove-duplicated-linkmode-pause-resolut.patch b/target/linux/generic/backport-6.1/715-19-v6.5-net-phylink-remove-duplicated-linkmode-pause-resolut.patch
deleted file mode 100644
index 3a26b4b6006f..000000000000
--- a/target/linux/generic/backport-6.1/715-19-v6.5-net-phylink-remove-duplicated-linkmode-pause-resolut.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 4b624a39f2ab523ca6a6ad9448fab1deb7b101e2 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Tue, 23 May 2023 11:15:53 +0100
-Subject: [PATCH 17/21] net: phylink: remove duplicated linkmode pause
- resolution
-
-Phylink had two chunks of code virtually the same for resolving the
-negotiated pause modes. Factor this down to one function.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 15 ++++-----------
- 1 file changed, 4 insertions(+), 11 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -976,11 +976,10 @@ static void phylink_apply_manual_flow(st
- 		state->pause = pl->link_config.pause;
- }
- 
--static void phylink_resolve_flow(struct phylink_link_state *state)
-+static void phylink_resolve_an_pause(struct phylink_link_state *state)
- {
- 	bool tx_pause, rx_pause;
- 
--	state->pause = MLO_PAUSE_NONE;
- 	if (state->duplex == DUPLEX_FULL) {
- 		linkmode_resolve_pause(state->advertising,
- 				       state->lp_advertising,
-@@ -1192,7 +1191,8 @@ static void phylink_get_fixed_state(stru
- 	else if (pl->link_gpio)
- 		state->link = !!gpiod_get_value_cansleep(pl->link_gpio);
- 
--	phylink_resolve_flow(state);
-+	state->pause = MLO_PAUSE_NONE;
-+	phylink_resolve_an_pause(state);
- }
- 
- static void phylink_mac_initial_config(struct phylink *pl, bool force_restart)
-@@ -3215,7 +3215,6 @@ static const struct sfp_upstream_ops sfp
- static void phylink_decode_c37_word(struct phylink_link_state *state,
- 				    uint16_t config_reg, int speed)
- {
--	bool tx_pause, rx_pause;
- 	int fd_bit;
- 
- 	if (speed == SPEED_2500)
-@@ -3234,13 +3233,7 @@ static void phylink_decode_c37_word(stru
- 		state->link = false;
- 	}
- 
--	linkmode_resolve_pause(state->advertising, state->lp_advertising,
--			       &tx_pause, &rx_pause);
--
--	if (tx_pause)
--		state->pause |= MLO_PAUSE_TX;
--	if (rx_pause)
--		state->pause |= MLO_PAUSE_RX;
-+	phylink_resolve_an_pause(state);
- }
- 
- static void phylink_decode_sgmii_word(struct phylink_link_state *state,
diff --git a/target/linux/generic/backport-6.1/715-20-v6.5-net-phylink-add-function-to-resolve-clause-73-negoti.patch b/target/linux/generic/backport-6.1/715-20-v6.5-net-phylink-add-function-to-resolve-clause-73-negoti.patch
deleted file mode 100644
index 2b2634f80c00..000000000000
--- a/target/linux/generic/backport-6.1/715-20-v6.5-net-phylink-add-function-to-resolve-clause-73-negoti.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From aa8b6bd2b1f235b262bd27f317a0516f196c2c6a Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Tue, 23 May 2023 11:15:58 +0100
-Subject: [PATCH 18/21] net: phylink: add function to resolve clause 73
- negotiation
-
-Add a function to resolve clause 73 negotiation according to the
-priority resolution function described in clause 73.3.6.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 39 +++++++++++++++++++++++++++++++++++++++
- include/linux/phylink.h   |  2 ++
- 2 files changed, 41 insertions(+)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -3212,6 +3212,45 @@ static const struct sfp_upstream_ops sfp
- 
- /* Helpers for MAC drivers */
- 
-+static struct {
-+	int bit;
-+	int speed;
-+} phylink_c73_priority_resolution[] = {
-+	{ ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, SPEED_100000 },
-+	{ ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, SPEED_100000 },
-+	/* 100GBASE-KP4 and 100GBASE-CR10 not supported */
-+	{ ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, SPEED_40000 },
-+	{ ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, SPEED_40000 },
-+	{ ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, SPEED_10000 },
-+	{ ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, SPEED_10000 },
-+	/* 5GBASE-KR not supported */
-+	{ ETHTOOL_LINK_MODE_2500baseX_Full_BIT, SPEED_2500 },
-+	{ ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, SPEED_1000 },
-+};
-+
-+void phylink_resolve_c73(struct phylink_link_state *state)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(phylink_c73_priority_resolution); i++) {
-+		int bit = phylink_c73_priority_resolution[i].bit;
-+		if (linkmode_test_bit(bit, state->advertising) &&
-+		    linkmode_test_bit(bit, state->lp_advertising))
-+			break;
-+	}
-+
-+	if (i < ARRAY_SIZE(phylink_c73_priority_resolution)) {
-+		state->speed = phylink_c73_priority_resolution[i].speed;
-+		state->duplex = DUPLEX_FULL;
-+	} else {
-+		/* negotiation failure */
-+		state->link = false;
-+	}
-+
-+	phylink_resolve_an_pause(state);
-+}
-+EXPORT_SYMBOL_GPL(phylink_resolve_c73);
-+
- static void phylink_decode_c37_word(struct phylink_link_state *state,
- 				    uint16_t config_reg, int speed)
- {
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -656,6 +656,8 @@ int phylink_mii_c22_pcs_config(struct md
- 			       const unsigned long *advertising);
- void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs);
- 
-+void phylink_resolve_c73(struct phylink_link_state *state);
-+
- void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs,
- 				   struct phylink_link_state *state);
- 
diff --git a/target/linux/generic/backport-6.1/715-21-v6.5-net-phylink-provide-phylink_pcs_config-and-phylink_p.patch b/target/linux/generic/backport-6.1/715-21-v6.5-net-phylink-provide-phylink_pcs_config-and-phylink_p.patch
deleted file mode 100644
index eea99a5d782e..000000000000
--- a/target/linux/generic/backport-6.1/715-21-v6.5-net-phylink-provide-phylink_pcs_config-and-phylink_p.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 796d709363135a6bd6a8ccc07b509c939e5b855f Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Tue, 23 May 2023 16:31:50 +0100
-Subject: [PATCH 19/21] net: phylink: provide phylink_pcs_config() and
- phylink_pcs_link_up()
-
-Add two helper functions for calling PCS methods. phylink_pcs_config()
-allows us to handle PCS configuration specifics in one location, rather
-than the two call sites. phylink_pcs_link_up() gives us consistency.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Link: https://lore.kernel.org/r/E1q1TzK-007Exd-Rs@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 53 ++++++++++++++++++++++++---------------
- 1 file changed, 33 insertions(+), 20 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -991,6 +991,25 @@ static void phylink_resolve_an_pause(str
- 	}
- }
- 
-+static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-+			      const struct phylink_link_state *state,
-+			      bool permit_pause_to_mac)
-+{
-+	if (!pcs)
-+		return 0;
-+
-+	return pcs->ops->pcs_config(pcs, mode, state->interface,
-+				    state->advertising, permit_pause_to_mac);
-+}
-+
-+static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
-+				phy_interface_t interface, int speed,
-+				int duplex)
-+{
-+	if (pcs && pcs->ops->pcs_link_up)
-+		pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex);
-+}
-+
- static void phylink_pcs_poll_stop(struct phylink *pl)
- {
- 	if (pl->cfg_link_an_mode == MLO_AN_INBAND)
-@@ -1074,18 +1093,15 @@ static void phylink_major_config(struct
- 
- 	phylink_mac_config(pl, state);
- 
--	if (pl->pcs) {
--		err = pl->pcs->ops->pcs_config(pl->pcs, pl->cur_link_an_mode,
--					       state->interface,
--					       state->advertising,
--					       !!(pl->link_config.pause &
--						  MLO_PAUSE_AN));
--		if (err < 0)
--			phylink_err(pl, "pcs_config failed: %pe\n",
--				    ERR_PTR(err));
--		if (err > 0)
--			restart = true;
--	}
-+	err = phylink_pcs_config(pl->pcs, pl->cur_link_an_mode, state,
-+				 !!(pl->link_config.pause &
-+				    MLO_PAUSE_AN));
-+	if (err < 0)
-+		phylink_err(pl, "pcs_config failed: %pe\n",
-+			    ERR_PTR(err));
-+	else if (err > 0)
-+		restart = true;
-+
- 	if (restart)
- 		phylink_mac_pcs_an_restart(pl);
- 
-@@ -1136,11 +1152,9 @@ static int phylink_change_inband_advert(
- 	 * restart negotiation if the pcs_config() helper indicates that
- 	 * the programmed advertisement has changed.
- 	 */
--	ret = pl->pcs->ops->pcs_config(pl->pcs, pl->cur_link_an_mode,
--				       pl->link_config.interface,
--				       pl->link_config.advertising,
--				       !!(pl->link_config.pause &
--					  MLO_PAUSE_AN));
-+	ret = phylink_pcs_config(pl->pcs, pl->cur_link_an_mode,
-+				 &pl->link_config,
-+				 !!(pl->link_config.pause & MLO_PAUSE_AN));
- 	if (ret < 0)
- 		return ret;
- 
-@@ -1272,9 +1286,8 @@ static void phylink_link_up(struct phyli
- 
- 	pl->cur_interface = link_state.interface;
- 
--	if (pl->pcs && pl->pcs->ops->pcs_link_up)
--		pl->pcs->ops->pcs_link_up(pl->pcs, pl->cur_link_an_mode,
--					  pl->cur_interface, speed, duplex);
-+	phylink_pcs_link_up(pl->pcs, pl->cur_link_an_mode, pl->cur_interface,
-+			    speed, duplex);
- 
- 	pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->cur_link_an_mode,
- 				 pl->cur_interface, speed, duplex,
diff --git a/target/linux/generic/backport-6.1/715-23-v6.4-net-phylink-actually-fix-ksettings_set-ethtool-call.patch b/target/linux/generic/backport-6.1/715-23-v6.4-net-phylink-actually-fix-ksettings_set-ethtool-call.patch
deleted file mode 100644
index 2f7f7a5737fc..000000000000
--- a/target/linux/generic/backport-6.1/715-23-v6.4-net-phylink-actually-fix-ksettings_set-ethtool-call.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 11933aa76865621d8e82553c8f3bc07796a5aaa2 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 1 Jun 2023 10:12:06 +0100
-Subject: [PATCH 20/21] net: phylink: actually fix ksettings_set() ethtool call
-
-Raju Lakkaraju reported that the below commit caused a regression
-with Lan743x drivers and a 2.5G SFP. Sadly, this is because the commit
-was utterly wrong. Let's fix this properly by not moving the
-linkmode_and(), but instead copying the link ksettings and then
-modifying the advertising mask before passing the modified link
-ksettings to phylib.
-
-Fixes: df0acdc59b09 ("net: phylink: fix ksettings_set() ethtool call")
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Link: https://lore.kernel.org/r/E1q4eLm-00Ayxk-GZ@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -2259,11 +2259,13 @@ int phylink_ethtool_ksettings_set(struct
- 
- 	ASSERT_RTNL();
- 
--	/* Mask out unsupported advertisements */
--	linkmode_and(config.advertising, kset->link_modes.advertising,
--		     pl->supported);
--
- 	if (pl->phydev) {
-+		struct ethtool_link_ksettings phy_kset = *kset;
-+
-+		linkmode_and(phy_kset.link_modes.advertising,
-+			     phy_kset.link_modes.advertising,
-+			     pl->supported);
-+
- 		/* We can rely on phylib for this update; we also do not need
- 		 * to update the pl->link_config settings:
- 		 * - the configuration returned via ksettings_get() will come
-@@ -2282,10 +2284,13 @@ int phylink_ethtool_ksettings_set(struct
- 		 *   the presence of a PHY, this should not be changed as that
- 		 *   should be determined from the media side advertisement.
- 		 */
--		return phy_ethtool_ksettings_set(pl->phydev, kset);
-+		return phy_ethtool_ksettings_set(pl->phydev, &phy_kset);
- 	}
- 
- 	config = pl->link_config;
-+	/* Mask out unsupported advertisements */
-+	linkmode_and(config.advertising, kset->link_modes.advertising,
-+		     pl->supported);
- 
- 	/* FIXME: should we reject autoneg if phy/mac does not support it? */
- 	switch (kset->base.autoneg) {
diff --git a/target/linux/generic/backport-6.1/715-24-v6.5-net-phylink-add-PCS-negotiation-mode.patch b/target/linux/generic/backport-6.1/715-24-v6.5-net-phylink-add-PCS-negotiation-mode.patch
deleted file mode 100644
index e1a8539aae42..000000000000
--- a/target/linux/generic/backport-6.1/715-24-v6.5-net-phylink-add-PCS-negotiation-mode.patch
+++ /dev/null
@@ -1,324 +0,0 @@
-From 79b07c3e9c4a2272927be8848c26b372516e1958 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 16 Jun 2023 13:06:22 +0100
-Subject: [PATCH 21/21] net: phylink: add PCS negotiation mode
-
-PCS have to work out whether they should enable PCS negotiation by
-looking at the "mode" and "interface" arguments, and the Autoneg bit
-in the advertising mask.
-
-This leads to some complex logic, so lets pull that out into phylink
-and instead pass a "neg_mode" argument to the PCS configuration and
-link up methods, instead of the "mode" argument.
-
-In order to transition drivers, add a "neg_mode" flag to the phylink
-PCS structure to PCS can indicate whether they want to be passed the
-neg_mode or the old mode argument.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Link: https://lore.kernel.org/r/E1qA8De-00EaFA-Ht@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c |  45 +++++++++++++----
- include/linux/phylink.h   | 104 +++++++++++++++++++++++++++++++++++---
- 2 files changed, 132 insertions(+), 17 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -71,6 +71,7 @@ struct phylink {
- 	struct mutex state_mutex;
- 	struct phylink_link_state phy_state;
- 	struct work_struct resolve;
-+	unsigned int pcs_neg_mode;
- 
- 	bool mac_link_dropped;
- 	bool using_mac_select_pcs;
-@@ -991,23 +992,23 @@ static void phylink_resolve_an_pause(str
- 	}
- }
- 
--static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-+static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
- 			      const struct phylink_link_state *state,
- 			      bool permit_pause_to_mac)
- {
- 	if (!pcs)
- 		return 0;
- 
--	return pcs->ops->pcs_config(pcs, mode, state->interface,
-+	return pcs->ops->pcs_config(pcs, neg_mode, state->interface,
- 				    state->advertising, permit_pause_to_mac);
- }
- 
--static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
-+static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
- 				phy_interface_t interface, int speed,
- 				int duplex)
- {
- 	if (pcs && pcs->ops->pcs_link_up)
--		pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex);
-+		pcs->ops->pcs_link_up(pcs, neg_mode, interface, speed, duplex);
- }
- 
- static void phylink_pcs_poll_stop(struct phylink *pl)
-@@ -1057,10 +1058,15 @@ static void phylink_major_config(struct
- 	struct phylink_pcs *pcs = NULL;
- 	bool pcs_changed = false;
- 	unsigned int rate_kbd;
-+	unsigned int neg_mode;
- 	int err;
- 
- 	phylink_dbg(pl, "major config %s\n", phy_modes(state->interface));
- 
-+	pl->pcs_neg_mode = phylink_pcs_neg_mode(pl->cur_link_an_mode,
-+						state->interface,
-+						state->advertising);
-+
- 	if (pl->using_mac_select_pcs) {
- 		pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface);
- 		if (IS_ERR(pcs)) {
-@@ -1093,9 +1099,12 @@ static void phylink_major_config(struct
- 
- 	phylink_mac_config(pl, state);
- 
--	err = phylink_pcs_config(pl->pcs, pl->cur_link_an_mode, state,
--				 !!(pl->link_config.pause &
--				    MLO_PAUSE_AN));
-+	neg_mode = pl->cur_link_an_mode;
-+	if (pl->pcs && pl->pcs->neg_mode)
-+		neg_mode = pl->pcs_neg_mode;
-+
-+	err = phylink_pcs_config(pl->pcs, neg_mode, state,
-+				 !!(pl->link_config.pause & MLO_PAUSE_AN));
- 	if (err < 0)
- 		phylink_err(pl, "pcs_config failed: %pe\n",
- 			    ERR_PTR(err));
-@@ -1130,6 +1139,7 @@ static void phylink_major_config(struct
-  */
- static int phylink_change_inband_advert(struct phylink *pl)
- {
-+	unsigned int neg_mode;
- 	int ret;
- 
- 	if (test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state))
-@@ -1148,12 +1158,20 @@ static int phylink_change_inband_advert(
- 		    __ETHTOOL_LINK_MODE_MASK_NBITS, pl->link_config.advertising,
- 		    pl->link_config.pause);
- 
-+	/* Recompute the PCS neg mode */
-+	pl->pcs_neg_mode = phylink_pcs_neg_mode(pl->cur_link_an_mode,
-+					pl->link_config.interface,
-+					pl->link_config.advertising);
-+
-+	neg_mode = pl->cur_link_an_mode;
-+	if (pl->pcs->neg_mode)
-+		neg_mode = pl->pcs_neg_mode;
-+
- 	/* Modern PCS-based method; update the advert at the PCS, and
- 	 * restart negotiation if the pcs_config() helper indicates that
- 	 * the programmed advertisement has changed.
- 	 */
--	ret = phylink_pcs_config(pl->pcs, pl->cur_link_an_mode,
--				 &pl->link_config,
-+	ret = phylink_pcs_config(pl->pcs, neg_mode, &pl->link_config,
- 				 !!(pl->link_config.pause & MLO_PAUSE_AN));
- 	if (ret < 0)
- 		return ret;
-@@ -1256,6 +1274,7 @@ static void phylink_link_up(struct phyli
- 			    struct phylink_link_state link_state)
- {
- 	struct net_device *ndev = pl->netdev;
-+	unsigned int neg_mode;
- 	int speed, duplex;
- 	bool rx_pause;
- 
-@@ -1286,8 +1305,12 @@ static void phylink_link_up(struct phyli
- 
- 	pl->cur_interface = link_state.interface;
- 
--	phylink_pcs_link_up(pl->pcs, pl->cur_link_an_mode, pl->cur_interface,
--			    speed, duplex);
-+	neg_mode = pl->cur_link_an_mode;
-+	if (pl->pcs && pl->pcs->neg_mode)
-+		neg_mode = pl->pcs_neg_mode;
-+
-+	phylink_pcs_link_up(pl->pcs, neg_mode, pl->cur_interface, speed,
-+			    duplex);
- 
- 	pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->cur_link_an_mode,
- 				 pl->cur_interface, speed, duplex,
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -21,6 +21,24 @@ enum {
- 	MLO_AN_FIXED,	/* Fixed-link mode */
- 	MLO_AN_INBAND,	/* In-band protocol */
- 
-+	/* PCS "negotiation" mode.
-+	 *  PHYLINK_PCS_NEG_NONE - protocol has no inband capability
-+	 *  PHYLINK_PCS_NEG_OUTBAND - some out of band or fixed link setting
-+	 *  PHYLINK_PCS_NEG_INBAND_DISABLED - inband mode disabled, e.g.
-+	 *				      1000base-X with autoneg off
-+	 *  PHYLINK_PCS_NEG_INBAND_ENABLED - inband mode enabled
-+	 * Additionally, this can be tested using bitmasks:
-+	 *  PHYLINK_PCS_NEG_INBAND - inband mode selected
-+	 *  PHYLINK_PCS_NEG_ENABLED - negotiation mode enabled
-+	 */
-+	PHYLINK_PCS_NEG_NONE = 0,
-+	PHYLINK_PCS_NEG_ENABLED = BIT(4),
-+	PHYLINK_PCS_NEG_OUTBAND = BIT(5),
-+	PHYLINK_PCS_NEG_INBAND = BIT(6),
-+	PHYLINK_PCS_NEG_INBAND_DISABLED = PHYLINK_PCS_NEG_INBAND,
-+	PHYLINK_PCS_NEG_INBAND_ENABLED = PHYLINK_PCS_NEG_INBAND |
-+					 PHYLINK_PCS_NEG_ENABLED,
-+
- 	/* MAC_SYM_PAUSE and MAC_ASYM_PAUSE are used when configuring our
- 	 * autonegotiation advertisement. They correspond to the PAUSE and
- 	 * ASM_DIR bits defined by 802.3, respectively.
-@@ -80,6 +98,70 @@ static inline bool phylink_autoneg_inban
- }
- 
- /**
-+ * phylink_pcs_neg_mode() - helper to determine PCS inband mode
-+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
-+ * @interface: interface mode to be used
-+ * @advertising: adertisement ethtool link mode mask
-+ *
-+ * Determines the negotiation mode to be used by the PCS, and returns
-+ * one of:
-+ * %PHYLINK_PCS_NEG_NONE: interface mode does not support inband
-+ * %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY)
-+ *   will be used.
-+ * %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg disabled
-+ * %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled
-+ *
-+ * Note: this is for cases where the PCS itself is involved in negotiation
-+ * (e.g. Clause 37, SGMII and similar) not Clause 73.
-+ */
-+static inline unsigned int phylink_pcs_neg_mode(unsigned int mode,
-+						phy_interface_t interface,
-+						const unsigned long *advertising)
-+{
-+	unsigned int neg_mode;
-+
-+	switch (interface) {
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_QSGMII:
-+	case PHY_INTERFACE_MODE_QUSGMII:
-+	case PHY_INTERFACE_MODE_USXGMII:
-+		/* These protocols are designed for use with a PHY which
-+		 * communicates its negotiation result back to the MAC via
-+		 * inband communication. Note: there exist PHYs that run
-+		 * with SGMII but do not send the inband data.
-+		 */
-+		if (!phylink_autoneg_inband(mode))
-+			neg_mode = PHYLINK_PCS_NEG_OUTBAND;
-+		else
-+			neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
-+		break;
-+
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+		/* 1000base-X is designed for use media-side for Fibre
-+		 * connections, and thus the Autoneg bit needs to be
-+		 * taken into account. We also do this for 2500base-X
-+		 * as well, but drivers may not support this, so may
-+		 * need to override this.
-+		 */
-+		if (!phylink_autoneg_inband(mode))
-+			neg_mode = PHYLINK_PCS_NEG_OUTBAND;
-+		else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+					   advertising))
-+			neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
-+		else
-+			neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED;
-+		break;
-+
-+	default:
-+		neg_mode = PHYLINK_PCS_NEG_NONE;
-+		break;
-+	}
-+
-+	return neg_mode;
-+}
-+
-+/**
-  * struct phylink_link_state - link state structure
-  * @advertising: ethtool bitmask containing advertised link modes
-  * @lp_advertising: ethtool bitmask containing link partner advertised link
-@@ -436,6 +518,7 @@ struct phylink_pcs_ops;
- /**
-  * struct phylink_pcs - PHYLINK PCS instance
-  * @ops: a pointer to the &struct phylink_pcs_ops structure
-+ * @neg_mode: provide PCS neg mode via "mode" argument
-  * @poll: poll the PCS for link changes
-  *
-  * This structure is designed to be embedded within the PCS private data,
-@@ -443,6 +526,7 @@ struct phylink_pcs_ops;
-  */
- struct phylink_pcs {
- 	const struct phylink_pcs_ops *ops;
-+	bool neg_mode;
- 	bool poll;
- };
- 
-@@ -460,12 +544,12 @@ struct phylink_pcs_ops {
- 			    const struct phylink_link_state *state);
- 	void (*pcs_get_state)(struct phylink_pcs *pcs,
- 			      struct phylink_link_state *state);
--	int (*pcs_config)(struct phylink_pcs *pcs, unsigned int mode,
-+	int (*pcs_config)(struct phylink_pcs *pcs, unsigned int neg_mode,
- 			  phy_interface_t interface,
- 			  const unsigned long *advertising,
- 			  bool permit_pause_to_mac);
- 	void (*pcs_an_restart)(struct phylink_pcs *pcs);
--	void (*pcs_link_up)(struct phylink_pcs *pcs, unsigned int mode,
-+	void (*pcs_link_up)(struct phylink_pcs *pcs, unsigned int neg_mode,
- 			    phy_interface_t interface, int speed, int duplex);
- };
- 
-@@ -508,7 +592,7 @@ void pcs_get_state(struct phylink_pcs *p
- /**
-  * pcs_config() - Configure the PCS mode and advertisement
-  * @pcs: a pointer to a &struct phylink_pcs.
-- * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
-+ * @neg_mode: link negotiation mode (see below)
-  * @interface: interface mode to be used
-  * @advertising: adertisement ethtool link mode mask
-  * @permit_pause_to_mac: permit forwarding pause resolution to MAC
-@@ -526,8 +610,12 @@ void pcs_get_state(struct phylink_pcs *p
-  * For 1000BASE-X, the advertisement should be programmed into the PCS.
-  *
-  * For most 10GBASE-R, there is no advertisement.
-+ *
-+ * The %neg_mode argument should be tested via the phylink_mode_*() family of
-+ * functions, or for PCS that set pcs->neg_mode true, should be tested
-+ * against the %PHYLINK_PCS_NEG_* definitions.
-  */
--int pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-+int pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
- 	       phy_interface_t interface, const unsigned long *advertising,
- 	       bool permit_pause_to_mac);
- 
-@@ -543,7 +631,7 @@ void pcs_an_restart(struct phylink_pcs *
- /**
-  * pcs_link_up() - program the PCS for the resolved link configuration
-  * @pcs: a pointer to a &struct phylink_pcs.
-- * @mode: link autonegotiation mode
-+ * @neg_mode: link negotiation mode (see below)
-  * @interface: link &typedef phy_interface_t mode
-  * @speed: link speed
-  * @duplex: link duplex
-@@ -552,8 +640,12 @@ void pcs_an_restart(struct phylink_pcs *
-  * the resolved link parameters. For example, a PCS operating in SGMII
-  * mode without in-band AN needs to be manually configured for the link
-  * and duplex setting. Otherwise, this should be a no-op.
-+ *
-+ * The %mode argument should be tested via the phylink_mode_*() family of
-+ * functions, or for PCS that set pcs->neg_mode true, should be tested
-+ * against the %PHYLINK_PCS_NEG_* definitions.
-  */
--void pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
-+void pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
- 		 phy_interface_t interface, int speed, int duplex);
- #endif
- 
diff --git a/target/linux/generic/backport-6.1/715-25-v6.5-net-phylink-convert-phylink_mii_c22_pcs_config-to-ne.patch b/target/linux/generic/backport-6.1/715-25-v6.5-net-phylink-convert-phylink_mii_c22_pcs_config-to-ne.patch
deleted file mode 100644
index 473e9d5836d1..000000000000
--- a/target/linux/generic/backport-6.1/715-25-v6.5-net-phylink-convert-phylink_mii_c22_pcs_config-to-ne.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From cdb08aa0473730315dbc088d5394e59622314034 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 16 Jun 2023 13:06:27 +0100
-Subject: [PATCH 1/2] net: phylink: convert phylink_mii_c22_pcs_config() to
- neg_mode
-
-Use phylink_pcs_neg_mode() for phylink_mii_c22_pcs_config(). This
-results in no functional change.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Link: https://lore.kernel.org/r/E1qA8Dj-00EaFG-Mt@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 9 ++++-----
- 1 file changed, 4 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -3558,6 +3558,7 @@ int phylink_mii_c22_pcs_config(struct md
- 			       phy_interface_t interface,
- 			       const unsigned long *advertising)
- {
-+	unsigned int neg_mode;
- 	bool changed = 0;
- 	u16 bmcr;
- 	int ret, adv;
-@@ -3571,15 +3572,13 @@ int phylink_mii_c22_pcs_config(struct md
- 		changed = ret;
- 	}
- 
--	/* Ensure ISOLATE bit is disabled */
--	if (mode == MLO_AN_INBAND &&
--	    (interface == PHY_INTERFACE_MODE_SGMII ||
--	     interface == PHY_INTERFACE_MODE_QSGMII ||
--	     linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, advertising)))
-+	neg_mode = phylink_pcs_neg_mode(mode, interface, advertising);
-+	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
- 		bmcr = BMCR_ANENABLE;
- 	else
- 		bmcr = 0;
- 
-+	/* Configure the inband state. Ensure ISOLATE bit is disabled */
- 	ret = mdiodev_modify(pcs, MII_BMCR, BMCR_ANENABLE | BMCR_ISOLATE, bmcr);
- 	if (ret < 0)
- 		return ret;
diff --git a/target/linux/generic/backport-6.1/715-26-v6.5-net-phylink-pass-neg_mode-into-phylink_mii_c22_pcs_c.patch b/target/linux/generic/backport-6.1/715-26-v6.5-net-phylink-pass-neg_mode-into-phylink_mii_c22_pcs_c.patch
deleted file mode 100644
index 07e879098a73..000000000000
--- a/target/linux/generic/backport-6.1/715-26-v6.5-net-phylink-pass-neg_mode-into-phylink_mii_c22_pcs_c.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From febf2aaf05641f3258cc30e072aff65cffc7c82c Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 16 Jun 2023 13:06:32 +0100
-Subject: [PATCH 2/2] net: phylink: pass neg_mode into
- phylink_mii_c22_pcs_config()
-
-Convert fman_dtsec, xilinx_axienet and pcs-lynx to pass the neg_mode
-into phylink_mii_c22_pcs_config(). Where appropriate, drivers are
-updated to have neg_mode passed into their pcs_config() and
-pcs_link_up() functions. For other drivers, we just hoist the call
-to phylink_pcs_neg_mode() to their pcs_config() method out of
-phylink_mii_c22_pcs_config().
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Link: https://lore.kernel.org/r/E1qA8Do-00EaFM-Ra@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- .../net/ethernet/freescale/fman/fman_dtsec.c   |  7 ++++---
- .../net/ethernet/xilinx/xilinx_axienet_main.c  |  6 ++++--
- drivers/net/pcs/pcs-lynx.c                     | 18 ++++++++++++------
- drivers/net/phy/phylink.c                      |  9 ++++-----
- include/linux/phylink.h                        |  5 +++--
- 5 files changed, 27 insertions(+), 18 deletions(-)
-
---- a/drivers/net/ethernet/freescale/fman/fman_dtsec.c
-+++ b/drivers/net/ethernet/freescale/fman/fman_dtsec.c
-@@ -763,15 +763,15 @@ static void dtsec_pcs_get_state(struct p
- 	phylink_mii_c22_pcs_get_state(dtsec->tbidev, state);
- }
- 
--static int dtsec_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-+static int dtsec_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
- 			    phy_interface_t interface,
- 			    const unsigned long *advertising,
- 			    bool permit_pause_to_mac)
- {
- 	struct fman_mac *dtsec = pcs_to_dtsec(pcs);
- 
--	return phylink_mii_c22_pcs_config(dtsec->tbidev, mode, interface,
--					  advertising);
-+	return phylink_mii_c22_pcs_config(dtsec->tbidev, interface,
-+					  advertising, neg_mode);
- }
- 
- static void dtsec_pcs_an_restart(struct phylink_pcs *pcs)
-@@ -1447,6 +1447,7 @@ int dtsec_initialization(struct mac_devi
- 		goto _return_fm_mac_free;
- 	}
- 	dtsec->pcs.ops = &dtsec_pcs_ops;
-+	dtsec->pcs.neg_mode = true;
- 	dtsec->pcs.poll = true;
- 
- 	supported = mac_dev->phylink_config.supported_interfaces;
---- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
-@@ -1632,7 +1632,7 @@ static void axienet_pcs_an_restart(struc
- 	phylink_mii_c22_pcs_an_restart(pcs_phy);
- }
- 
--static int axienet_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-+static int axienet_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
- 			      phy_interface_t interface,
- 			      const unsigned long *advertising,
- 			      bool permit_pause_to_mac)
-@@ -1654,7 +1654,8 @@ static int axienet_pcs_config(struct phy
- 		}
- 	}
- 
--	ret = phylink_mii_c22_pcs_config(pcs_phy, mode, interface, advertising);
-+	ret = phylink_mii_c22_pcs_config(pcs_phy, interface, advertising,
-+					 neg_mode);
- 	if (ret < 0)
- 		netdev_warn(ndev, "Failed to configure PCS: %d\n", ret);
- 
-@@ -2130,6 +2131,7 @@ static int axienet_probe(struct platform
- 		}
- 		of_node_put(np);
- 		lp->pcs.ops = &axienet_pcs_ops;
-+		lp->pcs.neg_mode = true;
- 		lp->pcs.poll = true;
- 	}
- 
---- a/drivers/net/pcs/pcs-lynx.c
-+++ b/drivers/net/pcs/pcs-lynx.c
-@@ -122,9 +122,10 @@ static void lynx_pcs_get_state(struct ph
- 		state->link, state->an_complete);
- }
- 
--static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
-+static int lynx_pcs_config_giga(struct mdio_device *pcs,
- 				phy_interface_t interface,
--				const unsigned long *advertising)
-+				const unsigned long *advertising,
-+				unsigned int neg_mode)
- {
- 	u32 link_timer;
- 	u16 if_mode;
-@@ -137,8 +138,9 @@ static int lynx_pcs_config_giga(struct m
- 
- 		if_mode = 0;
- 	} else {
-+		/* SGMII and QSGMII */
- 		if_mode = IF_MODE_SGMII_EN;
--		if (mode == MLO_AN_INBAND) {
-+		if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
- 			if_mode |= IF_MODE_USE_SGMII_AN;
- 
- 			/* Adjust link timer for SGMII */
-@@ -154,7 +156,8 @@ static int lynx_pcs_config_giga(struct m
- 	if (err)
- 		return err;
- 
--	return phylink_mii_c22_pcs_config(pcs, mode, interface, advertising);
-+	return phylink_mii_c22_pcs_config(pcs, interface, advertising,
-+					  neg_mode);
- }
- 
- static int lynx_pcs_config_usxgmii(struct mdio_device *pcs, unsigned int mode,
-@@ -181,13 +184,16 @@ static int lynx_pcs_config(struct phylin
- 			   bool permit)
- {
- 	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
-+	unsigned int neg_mode;
-+
-+	neg_mode = phylink_pcs_neg_mode(mode, ifmode, advertising);
- 
- 	switch (ifmode) {
- 	case PHY_INTERFACE_MODE_1000BASEX:
- 	case PHY_INTERFACE_MODE_SGMII:
- 	case PHY_INTERFACE_MODE_QSGMII:
--		return lynx_pcs_config_giga(lynx->mdio, mode, ifmode,
--					    advertising);
-+		return lynx_pcs_config_giga(lynx->mdio, ifmode, advertising,
-+					    neg_mode);
- 	case PHY_INTERFACE_MODE_2500BASEX:
- 		if (phylink_autoneg_inband(mode)) {
- 			dev_err(&lynx->mdio->dev,
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -3545,20 +3545,20 @@ EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_en
- /**
-  * phylink_mii_c22_pcs_config() - configure clause 22 PCS
-  * @pcs: a pointer to a &struct mdio_device.
-- * @mode: link autonegotiation mode
-  * @interface: the PHY interface mode being configured
-  * @advertising: the ethtool advertisement mask
-+ * @neg_mode: PCS negotiation mode
-  *
-  * Configure a Clause 22 PCS PHY with the appropriate negotiation
-  * parameters for the @mode, @interface and @advertising parameters.
-  * Returns negative error number on failure, zero if the advertisement
-  * has not changed, or positive if there is a change.
-  */
--int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode,
-+int phylink_mii_c22_pcs_config(struct mdio_device *pcs,
- 			       phy_interface_t interface,
--			       const unsigned long *advertising)
-+			       const unsigned long *advertising,
-+			       unsigned int neg_mode)
- {
--	unsigned int neg_mode;
- 	bool changed = 0;
- 	u16 bmcr;
- 	int ret, adv;
-@@ -3572,7 +3572,6 @@ int phylink_mii_c22_pcs_config(struct md
- 		changed = ret;
- 	}
- 
--	neg_mode = phylink_pcs_neg_mode(mode, interface, advertising);
- 	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
- 		bmcr = BMCR_ANENABLE;
- 	else
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -743,9 +743,10 @@ void phylink_mii_c22_pcs_get_state(struc
- 				   struct phylink_link_state *state);
- int phylink_mii_c22_pcs_encode_advertisement(phy_interface_t interface,
- 					     const unsigned long *advertising);
--int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode,
-+int phylink_mii_c22_pcs_config(struct mdio_device *pcs,
- 			       phy_interface_t interface,
--			       const unsigned long *advertising);
-+			       const unsigned long *advertising,
-+			       unsigned int neg_mode);
- void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs);
- 
- void phylink_resolve_c73(struct phylink_link_state *state);
diff --git a/target/linux/generic/backport-6.1/715-27-v6.5-net-pcs-lynxi-update-PCS-driver-to-use-neg_mode.patch b/target/linux/generic/backport-6.1/715-27-v6.5-net-pcs-lynxi-update-PCS-driver-to-use-neg_mode.patch
deleted file mode 100644
index 5e0128766ca8..000000000000
--- a/target/linux/generic/backport-6.1/715-27-v6.5-net-pcs-lynxi-update-PCS-driver-to-use-neg_mode.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From 3b2de56a146f34e3f70a84cc3a1897064e445d16 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 16 Jun 2023 13:06:43 +0100
-Subject: [PATCH] net: pcs: lynxi: update PCS driver to use neg_mode
-
-Update the Lynxi PCS driver to use neg_mode rather than the mode
-argument. This ensures that the link_up() method will always program
-the speed and duplex when negotiation is disabled.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Link: https://lore.kernel.org/r/E1qA8Dz-00EaFY-5A@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/pcs/pcs-mtk-lynxi.c | 39 ++++++++++++++-------------------
- 1 file changed, 16 insertions(+), 23 deletions(-)
-
---- a/drivers/net/pcs/pcs-mtk-lynxi.c
-+++ b/drivers/net/pcs/pcs-mtk-lynxi.c
-@@ -102,13 +102,13 @@ static void mtk_pcs_lynxi_get_state(stru
- 					 FIELD_GET(SGMII_LPA, adv));
- }
- 
--static int mtk_pcs_lynxi_config(struct phylink_pcs *pcs, unsigned int mode,
-+static int mtk_pcs_lynxi_config(struct phylink_pcs *pcs, unsigned int neg_mode,
- 				phy_interface_t interface,
- 				const unsigned long *advertising,
- 				bool permit_pause_to_mac)
- {
- 	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
--	bool mode_changed = false, changed, use_an;
-+	bool mode_changed = false, changed;
- 	unsigned int rgc3, sgm_mode, bmcr;
- 	int advertise, link_timer;
- 
-@@ -121,30 +121,22 @@ static int mtk_pcs_lynxi_config(struct p
- 	 * we assume that fixes it's speed at bitrate = line rate (in
- 	 * other words, 1000Mbps or 2500Mbps).
- 	 */
--	if (interface == PHY_INTERFACE_MODE_SGMII) {
-+	if (interface == PHY_INTERFACE_MODE_SGMII)
- 		sgm_mode = SGMII_IF_MODE_SGMII;
--		if (phylink_autoneg_inband(mode)) {
--			sgm_mode |= SGMII_REMOTE_FAULT_DIS |
--				    SGMII_SPEED_DUPLEX_AN;
--			use_an = true;
--		} else {
--			use_an = false;
--		}
--	} else if (phylink_autoneg_inband(mode)) {
--		/* 1000base-X or 2500base-X autoneg */
--		sgm_mode = SGMII_REMOTE_FAULT_DIS;
--		use_an = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
--					   advertising);
--	} else {
-+	else
- 		/* 1000base-X or 2500base-X without autoneg */
- 		sgm_mode = 0;
--		use_an = false;
--	}
- 
--	if (use_an)
-+	if (neg_mode & PHYLINK_PCS_NEG_INBAND)
-+		sgm_mode |= SGMII_REMOTE_FAULT_DIS;
-+
-+	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
-+		if (interface == PHY_INTERFACE_MODE_SGMII)
-+			sgm_mode |= SGMII_SPEED_DUPLEX_AN;
- 		bmcr = BMCR_ANENABLE;
--	else
-+	} else {
- 		bmcr = 0;
-+	}
- 
- 	if (mpcs->interface != interface) {
- 		link_timer = phylink_get_link_timer_ns(interface);
-@@ -216,14 +208,15 @@ static void mtk_pcs_lynxi_restart_an(str
- 	regmap_set_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1, BMCR_ANRESTART);
- }
- 
--static void mtk_pcs_lynxi_link_up(struct phylink_pcs *pcs, unsigned int mode,
-+static void mtk_pcs_lynxi_link_up(struct phylink_pcs *pcs,
-+				  unsigned int neg_mode,
- 				  phy_interface_t interface, int speed,
- 				  int duplex)
- {
- 	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
- 	unsigned int sgm_mode;
- 
--	if (!phylink_autoneg_inband(mode)) {
-+	if (neg_mode != PHYLINK_PCS_NEG_INBAND_ENABLED) {
- 		/* Force the speed and duplex setting */
- 		if (speed == SPEED_10)
- 			sgm_mode = SGMII_SPEED_10;
-@@ -286,6 +279,7 @@ struct phylink_pcs *mtk_pcs_lynxi_create
- 	mpcs->regmap = regmap;
- 	mpcs->flags = flags;
- 	mpcs->pcs.ops = &mtk_pcs_lynxi_ops;
-+	mpcs->pcs.neg_mode = true;
- 	mpcs->pcs.poll = true;
- 	mpcs->interface = PHY_INTERFACE_MODE_NA;
- 
diff --git a/target/linux/generic/backport-6.1/715-28-v6.4-net-pcs-xpcs-use-Autoneg-bit-rather-than-an_enabled.patch b/target/linux/generic/backport-6.1/715-28-v6.4-net-pcs-xpcs-use-Autoneg-bit-rather-than-an_enabled.patch
deleted file mode 100644
index 3dd22d29160f..000000000000
--- a/target/linux/generic/backport-6.1/715-28-v6.4-net-pcs-xpcs-use-Autoneg-bit-rather-than-an_enabled.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 459fd2f11204c962e3153020f4f56748e0e10afb Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Tue, 21 Mar 2023 15:58:49 +0000
-Subject: [PATCH] net: pcs: xpcs: use Autoneg bit rather than an_enabled
-
-The Autoneg bit in the advertising bitmap and state->an_enabled are
-always identical. Thus, we will be removing state->an_enabled.
-
-Use the Autoneg bit in the advertising bitmap to indicate whether
-autonegotiation should be used, rather than using the an_enabled
-member which will be going away.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/pcs/pcs-xpcs.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/net/pcs/pcs-xpcs.c
-+++ b/drivers/net/pcs/pcs-xpcs.c
-@@ -931,6 +931,7 @@ static int xpcs_get_state_c73(struct dw_
- 			      struct phylink_link_state *state,
- 			      const struct xpcs_compat *compat)
- {
-+	bool an_enabled;
- 	int ret;
- 
- 	/* Link needs to be read first ... */
-@@ -948,11 +949,13 @@ static int xpcs_get_state_c73(struct dw_
- 		return xpcs_do_config(xpcs, state->interface, MLO_AN_INBAND, NULL);
- 	}
- 
--	if (state->an_enabled && xpcs_aneg_done_c73(xpcs, state, compat)) {
-+	an_enabled = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+				       state->advertising);
-+	if (an_enabled && xpcs_aneg_done_c73(xpcs, state, compat)) {
- 		state->an_complete = true;
- 		xpcs_read_lpa_c73(xpcs, state);
- 		xpcs_resolve_lpa_c73(xpcs, state);
--	} else if (state->an_enabled) {
-+	} else if (an_enabled) {
- 		state->link = 0;
- 	} else if (state->link) {
- 		xpcs_resolve_pma(xpcs, state);
-@@ -1007,7 +1010,8 @@ static int xpcs_get_state_c37_1000basex(
- {
- 	int lpa, bmsr;
- 
--	if (state->an_enabled) {
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+			      state->advertising)) {
- 		/* Reset link state */
- 		state->link = false;
- 
diff --git a/target/linux/generic/backport-6.1/715-29-v6.4-net-pcs-xpcs-fix-incorrect-number-of-interfaces.patch b/target/linux/generic/backport-6.1/715-29-v6.4-net-pcs-xpcs-fix-incorrect-number-of-interfaces.patch
deleted file mode 100644
index 7cae8515fa1e..000000000000
--- a/target/linux/generic/backport-6.1/715-29-v6.4-net-pcs-xpcs-fix-incorrect-number-of-interfaces.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 43fb622d91a9f408322735d2f736495c1009f575 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Tue, 9 May 2023 12:50:04 +0100
-Subject: [PATCH] net: pcs: xpcs: fix incorrect number of interfaces
-
-In synopsys_xpcs_compat[], the DW_XPCS_2500BASEX entry was setting
-the number of interfaces using the xpcs_2500basex_features array
-rather than xpcs_2500basex_interfaces. This causes us to overflow
-the array of interfaces. Fix this.
-
-Fixes: f27abde3042a ("net: pcs: add 2500BASEX support for Intel mGbE controller")
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/pcs/pcs-xpcs.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/pcs/pcs-xpcs.c
-+++ b/drivers/net/pcs/pcs-xpcs.c
-@@ -1211,7 +1211,7 @@ static const struct xpcs_compat synopsys
- 	[DW_XPCS_2500BASEX] = {
- 		.supported = xpcs_2500basex_features,
- 		.interface = xpcs_2500basex_interfaces,
--		.num_interfaces = ARRAY_SIZE(xpcs_2500basex_features),
-+		.num_interfaces = ARRAY_SIZE(xpcs_2500basex_interfaces),
- 		.an_mode = DW_2500BASEX,
- 	},
- };
diff --git a/target/linux/generic/backport-6.1/715-v6.9-01-net-phy-qcom-qca808x-fix-logic-error-in-LED-brightne.patch b/target/linux/generic/backport-6.1/715-v6.9-01-net-phy-qcom-qca808x-fix-logic-error-in-LED-brightne.patch
deleted file mode 100644
index 0a7b5358f136..000000000000
--- a/target/linux/generic/backport-6.1/715-v6.9-01-net-phy-qcom-qca808x-fix-logic-error-in-LED-brightne.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From f2ec98566775dd4341ec1dcf93aa5859c60de826 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 1 Feb 2024 14:46:00 +0100
-Subject: [PATCH 1/2] net: phy: qcom: qca808x: fix logic error in LED
- brightness set
-
-In switching to using phy_modify_mmd and a more short version of the
-LED ON/OFF condition in later revision, it was made a logic error where
-
-value ? QCA808X_LED_FORCE_ON : QCA808X_LED_FORCE_OFF is always true as
-value is always OR with QCA808X_LED_FORCE_EN due to missing ()
-resulting in the testing condition being QCA808X_LED_FORCE_EN | value.
-
-Add the () to apply the correct condition and restore correct
-functionality of the brightness ON/OFF.
-
-Fixes: 7196062b64ee ("net: phy: at803x: add LED support for qca808x")
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/qcom/qca808x.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/qcom/qca808x.c
-+++ b/drivers/net/phy/qcom/qca808x.c
-@@ -820,8 +820,8 @@ static int qca808x_led_brightness_set(st
- 
- 	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
- 			      QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
--			      QCA808X_LED_FORCE_EN | value ? QCA808X_LED_FORCE_ON :
--							     QCA808X_LED_FORCE_OFF);
-+			      QCA808X_LED_FORCE_EN | (value ? QCA808X_LED_FORCE_ON :
-+							     QCA808X_LED_FORCE_OFF));
- }
- 
- static int qca808x_led_blink_set(struct phy_device *phydev, u8 index,
diff --git a/target/linux/generic/backport-6.1/715-v6.9-02-net-phy-qcom-qca808x-default-to-LED-active-High-if-n.patch b/target/linux/generic/backport-6.1/715-v6.9-02-net-phy-qcom-qca808x-default-to-LED-active-High-if-n.patch
deleted file mode 100644
index e32ed7f77724..000000000000
--- a/target/linux/generic/backport-6.1/715-v6.9-02-net-phy-qcom-qca808x-default-to-LED-active-High-if-n.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From f203c8c77c7616c099647636f4c67d59a45fe8a2 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 1 Feb 2024 14:46:01 +0100
-Subject: [PATCH 2/2] net: phy: qcom: qca808x: default to LED active High if
- not set
-
-qca808x PHY provide support for the led_polarity_set OP to configure
-and apply the active-low property but on PHY reset, the Active High bit
-is not set resulting in the LED driven as active-low.
-
-To fix this, check if active-low is not set in DT and enable Active High
-polarity by default to restore correct funcionality of the LED.
-
-Fixes: 7196062b64ee ("net: phy: at803x: add LED support for qca808x")
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/qcom/qca808x.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/phy/qcom/qca808x.c
-+++ b/drivers/net/phy/qcom/qca808x.c
-@@ -290,8 +290,18 @@ static int qca808x_probe(struct phy_devi
- 
- static int qca808x_config_init(struct phy_device *phydev)
- {
-+	struct qca808x_priv *priv = phydev->priv;
- 	int ret;
- 
-+	/* Default to LED Active High if active-low not in DT */
-+	if (priv->led_polarity_mode == -1) {
-+		ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN,
-+				       QCA808X_MMD7_LED_POLARITY_CTRL,
-+				       QCA808X_LED_ACTIVE_HIGH);
-+		if (ret)
-+			return ret;
-+	}
-+
- 	/* Active adc&vga on 802.3az for the link 1000M and 100M */
- 	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
- 			     QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
diff --git a/target/linux/generic/backport-6.1/716-v6.9-02-net-phy-add-support-for-scanning-PHY-in-PHY-packages.patch b/target/linux/generic/backport-6.1/716-v6.9-02-net-phy-add-support-for-scanning-PHY-in-PHY-packages.patch
deleted file mode 100644
index b355031aa5eb..000000000000
--- a/target/linux/generic/backport-6.1/716-v6.9-02-net-phy-add-support-for-scanning-PHY-in-PHY-packages.patch
+++ /dev/null
@@ -1,211 +0,0 @@
-From 385ef48f468696d6d172eb367656a3466fa0408d Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 6 Feb 2024 18:31:05 +0100
-Subject: [PATCH 02/10] net: phy: add support for scanning PHY in PHY packages
- nodes
-
-Add support for scanning PHY in PHY package nodes. PHY packages nodes
-are just container for actual PHY on the MDIO bus.
-
-Their PHY address defined in the PHY package node are absolute and
-reflect the address on the MDIO bus.
-
-mdio_bus.c and of_mdio.c is updated to now support and parse also
-PHY package subnode by checking if the node name match
-"ethernet-phy-package".
-
-As PHY package reg is mandatory and each PHY in the PHY package must
-have a reg, every invalid PHY Package node is ignored and will be
-skipped by the autoscan fallback.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/mdio/of_mdio.c | 79 +++++++++++++++++++++++++++-----------
- drivers/net/phy/mdio_bus.c | 44 +++++++++++++++++----
- 2 files changed, 92 insertions(+), 31 deletions(-)
-
---- a/drivers/net/mdio/of_mdio.c
-+++ b/drivers/net/mdio/of_mdio.c
-@@ -138,6 +138,53 @@ bool of_mdiobus_child_is_phy(struct devi
- }
- EXPORT_SYMBOL(of_mdiobus_child_is_phy);
- 
-+static int __of_mdiobus_parse_phys(struct mii_bus *mdio, struct device_node *np,
-+				   bool *scanphys)
-+{
-+	struct device_node *child;
-+	int addr, rc = 0;
-+
-+	/* Loop over the child nodes and register a phy_device for each phy */
-+	for_each_available_child_of_node(np, child) {
-+		if (of_node_name_eq(child, "ethernet-phy-package")) {
-+			/* Ignore invalid ethernet-phy-package node */
-+			if (!of_find_property(child, "reg", NULL))
-+				continue;
-+
-+			rc = __of_mdiobus_parse_phys(mdio, child, NULL);
-+			if (rc && rc != -ENODEV)
-+				goto exit;
-+
-+			continue;
-+		}
-+
-+		addr = of_mdio_parse_addr(&mdio->dev, child);
-+		if (addr < 0) {
-+			/* Skip scanning for invalid ethernet-phy-package node */
-+			if (scanphys)
-+				*scanphys = true;
-+			continue;
-+		}
-+
-+		if (of_mdiobus_child_is_phy(child))
-+			rc = of_mdiobus_register_phy(mdio, child, addr);
-+		else
-+			rc = of_mdiobus_register_device(mdio, child, addr);
-+
-+		if (rc == -ENODEV)
-+			dev_err(&mdio->dev,
-+				"MDIO device at address %d is missing.\n",
-+				addr);
-+		else if (rc)
-+			goto exit;
-+	}
-+
-+	return 0;
-+exit:
-+	of_node_put(child);
-+	return rc;
-+}
-+
- /**
-  * __of_mdiobus_register - Register mii_bus and create PHYs from the device tree
-  * @mdio: pointer to mii_bus structure
-@@ -179,33 +226,18 @@ int __of_mdiobus_register(struct mii_bus
- 		return rc;
- 
- 	/* Loop over the child nodes and register a phy_device for each phy */
--	for_each_available_child_of_node(np, child) {
--		addr = of_mdio_parse_addr(&mdio->dev, child);
--		if (addr < 0) {
--			scanphys = true;
--			continue;
--		}
--
--		if (of_mdiobus_child_is_phy(child))
--			rc = of_mdiobus_register_phy(mdio, child, addr);
--		else
--			rc = of_mdiobus_register_device(mdio, child, addr);
--
--		if (rc == -ENODEV)
--			dev_err(&mdio->dev,
--				"MDIO device at address %d is missing.\n",
--				addr);
--		else if (rc)
--			goto unregister;
--	}
-+	rc = __of_mdiobus_parse_phys(mdio, np, &scanphys);
-+	if (rc)
-+		goto unregister;
- 
- 	if (!scanphys)
- 		return 0;
- 
- 	/* auto scan for PHYs with empty reg property */
- 	for_each_available_child_of_node(np, child) {
--		/* Skip PHYs with reg property set */
--		if (of_find_property(child, "reg", NULL))
-+		/* Skip PHYs with reg property set or ethernet-phy-package node */
-+		if (of_find_property(child, "reg", NULL) ||
-+		    of_node_name_eq(child, "ethernet-phy-package"))
- 			continue;
- 
- 		for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
-@@ -226,15 +258,16 @@ int __of_mdiobus_register(struct mii_bus
- 				if (!rc)
- 					break;
- 				if (rc != -ENODEV)
--					goto unregister;
-+					goto put_unregister;
- 			}
- 		}
- 	}
- 
- 	return 0;
- 
--unregister:
-+put_unregister:
- 	of_node_put(child);
-+unregister:
- 	mdiobus_unregister(mdio);
- 	return rc;
- }
---- a/drivers/net/phy/mdio_bus.c
-+++ b/drivers/net/phy/mdio_bus.c
-@@ -448,19 +448,34 @@ EXPORT_SYMBOL(of_mdio_find_bus);
-  * found, set the of_node pointer for the mdio device. This allows
-  * auto-probed phy devices to be supplied with information passed in
-  * via DT.
-+ * If a PHY package is found, PHY is searched also there.
-  */
--static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
--				    struct mdio_device *mdiodev)
-+static int of_mdiobus_find_phy(struct device *dev, struct mdio_device *mdiodev,
-+			       struct device_node *np)
- {
--	struct device *dev = &mdiodev->dev;
- 	struct device_node *child;
- 
--	if (dev->of_node || !bus->dev.of_node)
--		return;
--
--	for_each_available_child_of_node(bus->dev.of_node, child) {
-+	for_each_available_child_of_node(np, child) {
- 		int addr;
- 
-+		if (of_node_name_eq(child, "ethernet-phy-package")) {
-+			/* Validate PHY package reg presence */
-+			if (!of_find_property(child, "reg", NULL)) {
-+				of_node_put(child);
-+				return -EINVAL;
-+			}
-+
-+			if (!of_mdiobus_find_phy(dev, mdiodev, child)) {
-+				/* The refcount for the PHY package will be
-+				 * incremented later when PHY join the Package.
-+				 */
-+				of_node_put(child);
-+				return 0;
-+			}
-+
-+			continue;
-+		}
-+
- 		addr = of_mdio_parse_addr(dev, child);
- 		if (addr < 0)
- 			continue;
-@@ -470,9 +485,22 @@ static void of_mdiobus_link_mdiodev(stru
- 			/* The refcount on "child" is passed to the mdio
- 			 * device. Do _not_ use of_node_put(child) here.
- 			 */
--			return;
-+			return 0;
- 		}
- 	}
-+
-+	return -ENODEV;
-+}
-+
-+static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
-+				    struct mdio_device *mdiodev)
-+{
-+	struct device *dev = &mdiodev->dev;
-+
-+	if (dev->of_node || !bus->dev.of_node)
-+		return;
-+
-+	of_mdiobus_find_phy(dev, mdiodev, bus->dev.of_node);
- }
- #else /* !IS_ENABLED(CONFIG_OF_MDIO) */
- static inline void of_mdiobus_link_mdiodev(struct mii_bus *mdio,
diff --git a/target/linux/generic/backport-6.1/716-v6.9-03-net-phy-add-devm-of_phy_package_join-helper.patch b/target/linux/generic/backport-6.1/716-v6.9-03-net-phy-add-devm-of_phy_package_join-helper.patch
deleted file mode 100644
index 3c7bf6c132ff..000000000000
--- a/target/linux/generic/backport-6.1/716-v6.9-03-net-phy-add-devm-of_phy_package_join-helper.patch
+++ /dev/null
@@ -1,185 +0,0 @@
-From 471e8fd3afcef5a9f9089f0bd21965ad9ba35c91 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 6 Feb 2024 18:31:06 +0100
-Subject: [PATCH 03/10] net: phy: add devm/of_phy_package_join helper
-
-Add devm/of_phy_package_join helper to join PHYs in a PHY package. These
-are variant of the manual phy_package_join with the difference that
-these will use DT nodes to derive the base_addr instead of manually
-passing an hardcoded value.
-
-An additional value is added in phy_package_shared, "np" to reference
-the PHY package node pointer in specific PHY driver probe_once and
-config_init_once functions to make use of additional specific properties
-defined in the PHY package node in DT.
-
-The np value is filled only with of_phy_package_join if a valid PHY
-package node is found. A valid PHY package node must have the node name
-set to "ethernet-phy-package".
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy_device.c | 96 ++++++++++++++++++++++++++++++++++++
- include/linux/phy.h          |  6 +++
- 2 files changed, 102 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1648,6 +1648,7 @@ int phy_package_join(struct phy_device *
- 			shared->priv_size = priv_size;
- 		}
- 		shared->base_addr = base_addr;
-+		shared->np = NULL;
- 		refcount_set(&shared->refcnt, 1);
- 		bus->shared[base_addr] = shared;
- 	} else {
-@@ -1671,6 +1672,63 @@ err_unlock:
- EXPORT_SYMBOL_GPL(phy_package_join);
- 
- /**
-+ * of_phy_package_join - join a common PHY group in PHY package
-+ * @phydev: target phy_device struct
-+ * @priv_size: if non-zero allocate this amount of bytes for private data
-+ *
-+ * This is a variant of phy_package_join for PHY package defined in DT.
-+ *
-+ * The parent node of the @phydev is checked as a valid PHY package node
-+ * structure (by matching the node name "ethernet-phy-package") and the
-+ * base_addr for the PHY package is passed to phy_package_join.
-+ *
-+ * With this configuration the shared struct will also have the np value
-+ * filled to use additional DT defined properties in PHY specific
-+ * probe_once and config_init_once PHY package OPs.
-+ *
-+ * Returns < 0 on error, 0 on success. Esp. calling phy_package_join()
-+ * with the same cookie but a different priv_size is an error. Or a parent
-+ * node is not detected or is not valid or doesn't match the expected node
-+ * name for PHY package.
-+ */
-+int of_phy_package_join(struct phy_device *phydev, size_t priv_size)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	struct device_node *package_node;
-+	u32 base_addr;
-+	int ret;
-+
-+	if (!node)
-+		return -EINVAL;
-+
-+	package_node = of_get_parent(node);
-+	if (!package_node)
-+		return -EINVAL;
-+
-+	if (!of_node_name_eq(package_node, "ethernet-phy-package")) {
-+		ret = -EINVAL;
-+		goto exit;
-+	}
-+
-+	if (of_property_read_u32(package_node, "reg", &base_addr)) {
-+		ret = -EINVAL;
-+		goto exit;
-+	}
-+
-+	ret = phy_package_join(phydev, base_addr, priv_size);
-+	if (ret)
-+		goto exit;
-+
-+	phydev->shared->np = package_node;
-+
-+	return 0;
-+exit:
-+	of_node_put(package_node);
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(of_phy_package_join);
-+
-+/**
-  * phy_package_leave - leave a common PHY group
-  * @phydev: target phy_device struct
-  *
-@@ -1686,6 +1744,10 @@ void phy_package_leave(struct phy_device
- 	if (!shared)
- 		return;
- 
-+	/* Decrease the node refcount on leave if present */
-+	if (shared->np)
-+		of_node_put(shared->np);
-+
- 	if (refcount_dec_and_mutex_lock(&shared->refcnt, &bus->shared_lock)) {
- 		bus->shared[shared->base_addr] = NULL;
- 		mutex_unlock(&bus->shared_lock);
-@@ -1739,6 +1801,40 @@ int devm_phy_package_join(struct device
- EXPORT_SYMBOL_GPL(devm_phy_package_join);
- 
- /**
-+ * devm_of_phy_package_join - resource managed of_phy_package_join()
-+ * @dev: device that is registering this PHY package
-+ * @phydev: target phy_device struct
-+ * @priv_size: if non-zero allocate this amount of bytes for private data
-+ *
-+ * Managed of_phy_package_join(). Shared storage fetched by this function,
-+ * phy_package_leave() is automatically called on driver detach. See
-+ * of_phy_package_join() for more information.
-+ */
-+int devm_of_phy_package_join(struct device *dev, struct phy_device *phydev,
-+			     size_t priv_size)
-+{
-+	struct phy_device **ptr;
-+	int ret;
-+
-+	ptr = devres_alloc(devm_phy_package_leave, sizeof(*ptr),
-+			   GFP_KERNEL);
-+	if (!ptr)
-+		return -ENOMEM;
-+
-+	ret = of_phy_package_join(phydev, priv_size);
-+
-+	if (!ret) {
-+		*ptr = phydev;
-+		devres_add(dev, ptr);
-+	} else {
-+		devres_free(ptr);
-+	}
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(devm_of_phy_package_join);
-+
-+/**
-  * phy_detach - detach a PHY device from its network device
-  * @phydev: target phy_device struct
-  *
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -321,6 +321,7 @@ struct mdio_bus_stats {
-  * struct phy_package_shared - Shared information in PHY packages
-  * @base_addr: Base PHY address of PHY package used to combine PHYs
-  *   in one package and for offset calculation of phy_package_read/write
-+ * @np: Pointer to the Device Node if PHY package defined in DT
-  * @refcnt: Number of PHYs connected to this shared data
-  * @flags: Initialization of PHY package
-  * @priv_size: Size of the shared private data @priv
-@@ -332,6 +333,8 @@ struct mdio_bus_stats {
-  */
- struct phy_package_shared {
- 	u8 base_addr;
-+	/* With PHY package defined in DT this points to the PHY package node */
-+	struct device_node *np;
- 	refcount_t refcnt;
- 	unsigned long flags;
- 	size_t priv_size;
-@@ -1793,9 +1796,12 @@ int phy_ethtool_set_link_ksettings(struc
- 				   const struct ethtool_link_ksettings *cmd);
- int phy_ethtool_nway_reset(struct net_device *ndev);
- int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size);
-+int of_phy_package_join(struct phy_device *phydev, size_t priv_size);
- void phy_package_leave(struct phy_device *phydev);
- int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
- 			  int base_addr, size_t priv_size);
-+int devm_of_phy_package_join(struct device *dev, struct phy_device *phydev,
-+			     size_t priv_size);
- 
- #if IS_ENABLED(CONFIG_PHYLIB)
- int __init mdio_bus_init(void);
diff --git a/target/linux/generic/backport-6.1/716-v6.9-04-net-phy-qcom-move-more-function-to-shared-library.patch b/target/linux/generic/backport-6.1/716-v6.9-04-net-phy-qcom-move-more-function-to-shared-library.patch
deleted file mode 100644
index e935725630c4..000000000000
--- a/target/linux/generic/backport-6.1/716-v6.9-04-net-phy-qcom-move-more-function-to-shared-library.patch
+++ /dev/null
@@ -1,583 +0,0 @@
-From 737eb75a815f9c08dcbb6631db57f4f4b0540a5b Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 6 Feb 2024 18:31:07 +0100
-Subject: [PATCH 04/10] net: phy: qcom: move more function to shared library
-
-Move more function to shared library in preparation for introduction of
-new PHY Family qca807x that will make use of both functions from at803x
-and qca808x as it's a transition PHY with some implementation of at803x
-and some from the new qca808x.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/qcom/at803x.c       |  35 -----
- drivers/net/phy/qcom/qca808x.c      | 205 ----------------------------
- drivers/net/phy/qcom/qcom-phy-lib.c | 193 ++++++++++++++++++++++++++
- drivers/net/phy/qcom/qcom.h         |  51 +++++++
- 4 files changed, 244 insertions(+), 240 deletions(-)
-
---- a/drivers/net/phy/qcom/at803x.c
-+++ b/drivers/net/phy/qcom/at803x.c
-@@ -504,41 +504,6 @@ static void at803x_link_change_notify(st
- 	}
- }
- 
--static int at803x_read_status(struct phy_device *phydev)
--{
--	struct at803x_ss_mask ss_mask = { 0 };
--	int err, old_link = phydev->link;
--
--	/* Update the link, but return if there was an error */
--	err = genphy_update_link(phydev);
--	if (err)
--		return err;
--
--	/* why bother the PHY if nothing can have changed */
--	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
--		return 0;
--
--	phydev->speed = SPEED_UNKNOWN;
--	phydev->duplex = DUPLEX_UNKNOWN;
--	phydev->pause = 0;
--	phydev->asym_pause = 0;
--
--	err = genphy_read_lpa(phydev);
--	if (err < 0)
--		return err;
--
--	ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
--	ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
--	err = at803x_read_specific_status(phydev, ss_mask);
--	if (err < 0)
--		return err;
--
--	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
--		phy_resolve_aneg_pause(phydev);
--
--	return 0;
--}
--
- static int at803x_config_aneg(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
---- a/drivers/net/phy/qcom/qca808x.c
-+++ b/drivers/net/phy/qcom/qca808x.c
-@@ -2,7 +2,6 @@
- 
- #include <linux/phy.h>
- #include <linux/module.h>
--#include <linux/ethtool_netlink.h>
- 
- #include "qcom.h"
- 
-@@ -63,55 +62,6 @@
- #define QCA808X_DBG_AN_TEST			0xb
- #define QCA808X_HIBERNATION_EN			BIT(15)
- 
--#define QCA808X_CDT_ENABLE_TEST			BIT(15)
--#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
--#define QCA808X_CDT_STATUS			BIT(11)
--#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
--
--#define QCA808X_MMD3_CDT_STATUS			0x8064
--#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
--#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
--#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
--#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
--#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
--#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
--
--#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
--#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
--#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
--#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
--
--#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
--#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
--#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
--#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
--#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
--
--#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
--#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
--#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
--#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
--
--/* NORMAL are MDI with type set to 0 */
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
--									 QCA808X_CDT_STATUS_STAT_MDI1)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
--									 QCA808X_CDT_STATUS_STAT_MDI1)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
--									 QCA808X_CDT_STATUS_STAT_MDI2)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
--									 QCA808X_CDT_STATUS_STAT_MDI2)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
--									 QCA808X_CDT_STATUS_STAT_MDI3)
--#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
--									 QCA808X_CDT_STATUS_STAT_MDI3)
--
--/* Added for reference of existence but should be handled by wait_for_completion already */
--#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
--
- #define QCA808X_MMD7_LED_GLOBAL			0x8073
- #define QCA808X_LED_BLINK_1			GENMASK(11, 6)
- #define QCA808X_LED_BLINK_2			GENMASK(5, 0)
-@@ -406,86 +356,6 @@ static int qca808x_soft_reset(struct phy
- 	return ret;
- }
- 
--static bool qca808x_cdt_fault_length_valid(int cdt_code)
--{
--	switch (cdt_code) {
--	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
--		return true;
--	default:
--		return false;
--	}
--}
--
--static int qca808x_cable_test_result_trans(int cdt_code)
--{
--	switch (cdt_code) {
--	case QCA808X_CDT_STATUS_STAT_NORMAL:
--		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
--	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
--		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
--	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
--		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
--	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
--		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
--	case QCA808X_CDT_STATUS_STAT_FAIL:
--	default:
--		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
--	}
--}
--
--static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
--				    int result)
--{
--	int val;
--	u32 cdt_length_reg = 0;
--
--	switch (pair) {
--	case ETHTOOL_A_CABLE_PAIR_A:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
--		break;
--	case ETHTOOL_A_CABLE_PAIR_B:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
--		break;
--	case ETHTOOL_A_CABLE_PAIR_C:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
--		break;
--	case ETHTOOL_A_CABLE_PAIR_D:
--		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
--	if (val < 0)
--		return val;
--
--	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
--		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
--	else
--		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
--
--	return at803x_cdt_fault_length(val);
--}
--
- static int qca808x_cable_test_start(struct phy_device *phydev)
- {
- 	int ret;
-@@ -526,81 +396,6 @@ static int qca808x_cable_test_start(stru
- 
- 	return 0;
- }
--
--static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
--					      u16 status)
--{
--	int length, result;
--	u16 pair_code;
--
--	switch (pair) {
--	case ETHTOOL_A_CABLE_PAIR_A:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
--		break;
--	case ETHTOOL_A_CABLE_PAIR_B:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
--		break;
--	case ETHTOOL_A_CABLE_PAIR_C:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
--		break;
--	case ETHTOOL_A_CABLE_PAIR_D:
--		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	result = qca808x_cable_test_result_trans(pair_code);
--	ethnl_cable_test_result(phydev, pair, result);
--
--	if (qca808x_cdt_fault_length_valid(pair_code)) {
--		length = qca808x_cdt_fault_length(phydev, pair, result);
--		ethnl_cable_test_fault_length(phydev, pair, length);
--	}
--
--	return 0;
--}
--
--static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
--{
--	int ret, val;
--
--	*finished = false;
--
--	val = QCA808X_CDT_ENABLE_TEST |
--	      QCA808X_CDT_LENGTH_UNIT;
--	ret = at803x_cdt_start(phydev, val);
--	if (ret)
--		return ret;
--
--	ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
--	if (ret)
--		return ret;
--
--	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
--	if (val < 0)
--		return val;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
--	if (ret)
--		return ret;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
--	if (ret)
--		return ret;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
--	if (ret)
--		return ret;
--
--	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
--	if (ret)
--		return ret;
--
--	*finished = true;
--
--	return 0;
--}
- 
- static int qca808x_get_features(struct phy_device *phydev)
- {
---- a/drivers/net/phy/qcom/qcom-phy-lib.c
-+++ b/drivers/net/phy/qcom/qcom-phy-lib.c
-@@ -5,6 +5,7 @@
- 
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
-+#include <linux/ethtool_netlink.h>
- 
- #include "qcom.h"
- 
-@@ -311,6 +312,42 @@ int at803x_prepare_config_aneg(struct ph
- }
- EXPORT_SYMBOL_GPL(at803x_prepare_config_aneg);
- 
-+int at803x_read_status(struct phy_device *phydev)
-+{
-+	struct at803x_ss_mask ss_mask = { 0 };
-+	int err, old_link = phydev->link;
-+
-+	/* Update the link, but return if there was an error */
-+	err = genphy_update_link(phydev);
-+	if (err)
-+		return err;
-+
-+	/* why bother the PHY if nothing can have changed */
-+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
-+		return 0;
-+
-+	phydev->speed = SPEED_UNKNOWN;
-+	phydev->duplex = DUPLEX_UNKNOWN;
-+	phydev->pause = 0;
-+	phydev->asym_pause = 0;
-+
-+	err = genphy_read_lpa(phydev);
-+	if (err < 0)
-+		return err;
-+
-+	ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
-+	ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
-+	err = at803x_read_specific_status(phydev, ss_mask);
-+	if (err < 0)
-+		return err;
-+
-+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
-+		phy_resolve_aneg_pause(phydev);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(at803x_read_status);
-+
- static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
- {
- 	int val;
-@@ -427,3 +464,159 @@ int at803x_cdt_wait_for_completion(struc
- 	return ret < 0 ? ret : 0;
- }
- EXPORT_SYMBOL_GPL(at803x_cdt_wait_for_completion);
-+
-+static bool qca808x_cdt_fault_length_valid(int cdt_code)
-+{
-+	switch (cdt_code) {
-+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
-+		return true;
-+	default:
-+		return false;
-+	}
-+}
-+
-+static int qca808x_cable_test_result_trans(int cdt_code)
-+{
-+	switch (cdt_code) {
-+	case QCA808X_CDT_STATUS_STAT_NORMAL:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
-+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
-+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
-+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
-+	case QCA808X_CDT_STATUS_STAT_FAIL:
-+	default:
-+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
-+	}
-+}
-+
-+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
-+				    int result)
-+{
-+	int val;
-+	u32 cdt_length_reg = 0;
-+
-+	switch (pair) {
-+	case ETHTOOL_A_CABLE_PAIR_A:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_B:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_C:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_D:
-+		cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
-+	if (val < 0)
-+		return val;
-+
-+	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
-+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
-+	else
-+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
-+
-+	return at803x_cdt_fault_length(val);
-+}
-+
-+static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
-+					      u16 status)
-+{
-+	int length, result;
-+	u16 pair_code;
-+
-+	switch (pair) {
-+	case ETHTOOL_A_CABLE_PAIR_A:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_B:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_C:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
-+		break;
-+	case ETHTOOL_A_CABLE_PAIR_D:
-+		pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	result = qca808x_cable_test_result_trans(pair_code);
-+	ethnl_cable_test_result(phydev, pair, result);
-+
-+	if (qca808x_cdt_fault_length_valid(pair_code)) {
-+		length = qca808x_cdt_fault_length(phydev, pair, result);
-+		ethnl_cable_test_fault_length(phydev, pair, length);
-+	}
-+
-+	return 0;
-+}
-+
-+int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
-+{
-+	int ret, val;
-+
-+	*finished = false;
-+
-+	val = QCA808X_CDT_ENABLE_TEST |
-+	      QCA808X_CDT_LENGTH_UNIT;
-+	ret = at803x_cdt_start(phydev, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
-+	if (ret)
-+		return ret;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
-+	if (val < 0)
-+		return val;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
-+	if (ret)
-+		return ret;
-+
-+	*finished = true;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(qca808x_cable_test_get_status);
---- a/drivers/net/phy/qcom/qcom.h
-+++ b/drivers/net/phy/qcom/qcom.h
-@@ -54,6 +54,55 @@
- #define AT803X_CDT_STATUS_STAT_MASK		GENMASK(9, 8)
- #define AT803X_CDT_STATUS_DELTA_TIME_MASK	GENMASK(7, 0)
- 
-+#define QCA808X_CDT_ENABLE_TEST			BIT(15)
-+#define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
-+#define QCA808X_CDT_STATUS			BIT(11)
-+#define QCA808X_CDT_LENGTH_UNIT			BIT(10)
-+
-+#define QCA808X_MMD3_CDT_STATUS			0x8064
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_A		0x8065
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
-+#define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
-+#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
-+#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
-+
-+#define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
-+#define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
-+#define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
-+#define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
-+
-+#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
-+#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
-+#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
-+#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
-+#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
-+
-+#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
-+#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
-+#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
-+#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
-+
-+/* NORMAL are MDI with type set to 0 */
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI1)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI1)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI2)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI2)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
-+									 QCA808X_CDT_STATUS_STAT_MDI3)
-+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
-+									 QCA808X_CDT_STATUS_STAT_MDI3)
-+
-+/* Added for reference of existence but should be handled by wait_for_completion already */
-+#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
-+
- #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
- #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
- #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
-@@ -110,6 +159,7 @@ int at803x_read_specific_status(struct p
- 				struct at803x_ss_mask ss_mask);
- int at803x_config_mdix(struct phy_device *phydev, u8 ctrl);
- int at803x_prepare_config_aneg(struct phy_device *phydev);
-+int at803x_read_status(struct phy_device *phydev);
- int at803x_get_tunable(struct phy_device *phydev,
- 		       struct ethtool_tunable *tuna, void *data);
- int at803x_set_tunable(struct phy_device *phydev,
-@@ -118,3 +168,4 @@ int at803x_cdt_fault_length(int dt);
- int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start);
- int at803x_cdt_wait_for_completion(struct phy_device *phydev,
- 				   u32 cdt_en);
-+int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished);
diff --git a/target/linux/generic/backport-6.1/716-v6.9-06-net-phy-provide-whether-link-has-changed-in-c37_read.patch b/target/linux/generic/backport-6.1/716-v6.9-06-net-phy-provide-whether-link-has-changed-in-c37_read.patch
deleted file mode 100644
index acaa4a644ee4..000000000000
--- a/target/linux/generic/backport-6.1/716-v6.9-06-net-phy-provide-whether-link-has-changed-in-c37_read.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 9b1d5e055508393561e26bd1720f4c2639b03b1a Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 6 Feb 2024 18:31:09 +0100
-Subject: [PATCH 06/10] net: phy: provide whether link has changed in
- c37_read_status
-
-Some PHY driver might require additional regs call after
-genphy_c37_read_status() is called.
-
-Expand genphy_c37_read_status to provide a bool wheather the link has
-changed or not to permit PHY driver to skip additional regs call if
-nothing has changed.
-
-Every user of genphy_c37_read_status() is updated with the new
-additional bool.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/broadcom.c    |  3 ++-
- drivers/net/phy/phy_device.c  | 11 +++++++++--
- drivers/net/phy/qcom/at803x.c |  3 ++-
- include/linux/phy.h           |  2 +-
- 4 files changed, 14 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -609,10 +609,11 @@ static int bcm54616s_config_aneg(struct
- static int bcm54616s_read_status(struct phy_device *phydev)
- {
- 	struct bcm54616s_phy_priv *priv = phydev->priv;
-+	bool changed;
- 	int err;
- 
- 	if (priv->mode_1000bx_en)
--		err = genphy_c37_read_status(phydev);
-+		err = genphy_c37_read_status(phydev, &changed);
- 	else
- 		err = genphy_read_status(phydev);
- 
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -2549,12 +2549,15 @@ EXPORT_SYMBOL(genphy_read_status);
- /**
-  * genphy_c37_read_status - check the link status and update current link state
-  * @phydev: target phy_device struct
-+ * @changed: pointer where to store if link changed
-  *
-  * Description: Check the link, then figure out the current state
-  *   by comparing what we advertise with what the link partner
-  *   advertises. This function is for Clause 37 1000Base-X mode.
-+ *
-+ *   If link has changed, @changed is set to true, false otherwise.
-  */
--int genphy_c37_read_status(struct phy_device *phydev)
-+int genphy_c37_read_status(struct phy_device *phydev, bool *changed)
- {
- 	int lpa, err, old_link = phydev->link;
- 
-@@ -2564,9 +2567,13 @@ int genphy_c37_read_status(struct phy_de
- 		return err;
- 
- 	/* why bother the PHY if nothing can have changed */
--	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
-+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) {
-+		*changed = false;
- 		return 0;
-+	}
- 
-+	/* Signal link has changed */
-+	*changed = true;
- 	phydev->duplex = DUPLEX_UNKNOWN;
- 	phydev->pause = 0;
- 	phydev->asym_pause = 0;
---- a/drivers/net/phy/qcom/at803x.c
-+++ b/drivers/net/phy/qcom/at803x.c
-@@ -912,9 +912,10 @@ static int at8031_config_intr(struct phy
- static int at8031_read_status(struct phy_device *phydev)
- {
- 	struct at803x_priv *priv = phydev->priv;
-+	bool changed;
- 
- 	if (priv->is_1000basex)
--		return genphy_c37_read_status(phydev);
-+		return genphy_c37_read_status(phydev, &changed);
- 
- 	return at803x_read_status(phydev);
- }
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -1688,7 +1688,7 @@ int genphy_write_mmd_unsupported(struct
- 
- /* Clause 37 */
- int genphy_c37_config_aneg(struct phy_device *phydev);
--int genphy_c37_read_status(struct phy_device *phydev);
-+int genphy_c37_read_status(struct phy_device *phydev, bool *changed);
- 
- /* Clause 45 PHY */
- int genphy_c45_restart_aneg(struct phy_device *phydev);
diff --git a/target/linux/generic/backport-6.1/716-v6.9-07-net-phy-qcom-add-support-for-QCA807x-PHY-Family.patch b/target/linux/generic/backport-6.1/716-v6.9-07-net-phy-qcom-add-support-for-QCA807x-PHY-Family.patch
deleted file mode 100644
index bbf0f76d68cc..000000000000
--- a/target/linux/generic/backport-6.1/716-v6.9-07-net-phy-qcom-add-support-for-QCA807x-PHY-Family.patch
+++ /dev/null
@@ -1,668 +0,0 @@
-From d1cb613efbd3cd7d0c000167816beb3f248f5eb8 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Tue, 6 Feb 2024 18:31:10 +0100
-Subject: [PATCH 07/10] net: phy: qcom: add support for QCA807x PHY Family
-
-This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s.
-
-They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te,
-100BASE-TX and 1000BASE-T PHY-s.
-
-They feature 2 SerDes, one for PSGMII or QSGMII connection with
-MAC, while second one is SGMII for connection to MAC or fiber.
-
-Both models have a combo port that supports 1000BASE-X and
-100BASE-FX fiber.
-
-PHY package can be configured in 3 mode following this table:
-
-              First Serdes mode       Second Serdes mode
-Option 1      PSGMII for copper       Disabled
-              ports 0-4
-Option 2      PSGMII for copper       1000BASE-X / 100BASE-FX
-              ports 0-4
-Option 3      QSGMII for copper       SGMII for
-              ports 0-3               copper port 4
-
-Each PHY inside of QCA807x series has 4 digitally controlled
-output only pins that natively drive LED-s.
-But some vendors used these to driver generic LED-s controlled
-by userspace, so lets enable registering each PHY as GPIO
-controller and add driver for it.
-
-These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x
-boards.
-
-Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/qcom/Kconfig   |   8 +
- drivers/net/phy/qcom/Makefile  |   1 +
- drivers/net/phy/qcom/qca807x.c | 597 +++++++++++++++++++++++++++++++++
- 3 files changed, 606 insertions(+)
- create mode 100644 drivers/net/phy/qcom/qca807x.c
-
---- a/drivers/net/phy/qcom/Kconfig
-+++ b/drivers/net/phy/qcom/Kconfig
-@@ -20,3 +20,11 @@ config QCA808X_PHY
- 	select QCOM_NET_PHYLIB
- 	help
- 	  Currently supports the QCA8081 model
-+
-+config QCA807X_PHY
-+	tristate "Qualcomm QCA807x PHYs"
-+	select QCOM_NET_PHYLIB
-+	depends on OF_MDIO
-+	help
-+	  Currently supports the Qualcomm QCA8072, QCA8075 and the PSGMII
-+	  control PHY.
---- a/drivers/net/phy/qcom/Makefile
-+++ b/drivers/net/phy/qcom/Makefile
-@@ -3,3 +3,4 @@ obj-$(CONFIG_QCOM_NET_PHYLIB)	+= qcom-ph
- obj-$(CONFIG_AT803X_PHY)	+= at803x.o
- obj-$(CONFIG_QCA83XX_PHY)	+= qca83xx.o
- obj-$(CONFIG_QCA808X_PHY)	+= qca808x.o
-+obj-$(CONFIG_QCA807X_PHY)	+= qca807x.o
---- /dev/null
-+++ b/drivers/net/phy/qcom/qca807x.c
-@@ -0,0 +1,597 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Copyright (c) 2023 Sartura Ltd.
-+ *
-+ * Author: Robert Marko <robert.marko@sartura.hr>
-+ *         Christian Marangi <ansuelsmth@gmail.com>
-+ *
-+ * Qualcomm QCA8072 and QCA8075 PHY driver
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/phy.h>
-+#include <linux/bitfield.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/sfp.h>
-+
-+#include "qcom.h"
-+
-+#define QCA807X_CHIP_CONFIGURATION				0x1f
-+#define QCA807X_BT_BX_REG_SEL					BIT(15)
-+#define QCA807X_BT_BX_REG_SEL_FIBER				0
-+#define QCA807X_BT_BX_REG_SEL_COPPER				1
-+#define QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK		GENMASK(3, 0)
-+#define QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII		4
-+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER		3
-+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER	0
-+
-+#define QCA807X_MEDIA_SELECT_STATUS				0x1a
-+#define QCA807X_MEDIA_DETECTED_COPPER				BIT(5)
-+#define QCA807X_MEDIA_DETECTED_1000_BASE_X			BIT(4)
-+#define QCA807X_MEDIA_DETECTED_100_BASE_FX			BIT(3)
-+
-+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION			0x807e
-+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN		BIT(0)
-+
-+#define QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH	0x801a
-+#define QCA807X_CONTROL_DAC_MASK				GENMASK(2, 0)
-+/* List of tweaks enabled by this bit:
-+ * - With both FULL amplitude and FULL bias current: bias current
-+ *   is set to half.
-+ * - With only DSP amplitude: bias current is set to half and
-+ *   is set to 1/4 with cable < 10m.
-+ * - With DSP bias current (included both DSP amplitude and
-+ *   DSP bias current): bias current is half the detected current
-+ *   with cable < 10m.
-+ */
-+#define QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK			BIT(2)
-+#define QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT			BIT(1)
-+#define QCA807X_CONTROL_DAC_DSP_AMPLITUDE			BIT(0)
-+
-+#define QCA807X_MMD7_LED_100N_1				0x8074
-+#define QCA807X_MMD7_LED_100N_2				0x8075
-+#define QCA807X_MMD7_LED_1000N_1			0x8076
-+#define QCA807X_MMD7_LED_1000N_2			0x8077
-+
-+#define QCA807X_MMD7_LED_CTRL(x)			(0x8074 + ((x) * 2))
-+#define QCA807X_MMD7_LED_FORCE_CTRL(x)			(0x8075 + ((x) * 2))
-+
-+#define QCA807X_GPIO_FORCE_EN				BIT(15)
-+#define QCA807X_GPIO_FORCE_MODE_MASK			GENMASK(14, 13)
-+
-+#define QCA807X_FUNCTION_CONTROL			0x10
-+#define QCA807X_FC_MDI_CROSSOVER_MODE_MASK		GENMASK(6, 5)
-+#define QCA807X_FC_MDI_CROSSOVER_AUTO			3
-+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDIX		1
-+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDI		0
-+
-+/* PQSGMII Analog PHY specific */
-+#define PQSGMII_CTRL_REG				0x0
-+#define PQSGMII_ANALOG_SW_RESET				BIT(6)
-+#define PQSGMII_DRIVE_CONTROL_1				0xb
-+#define PQSGMII_TX_DRIVER_MASK				GENMASK(7, 4)
-+#define PQSGMII_TX_DRIVER_140MV				0x0
-+#define PQSGMII_TX_DRIVER_160MV				0x1
-+#define PQSGMII_TX_DRIVER_180MV				0x2
-+#define PQSGMII_TX_DRIVER_200MV				0x3
-+#define PQSGMII_TX_DRIVER_220MV				0x4
-+#define PQSGMII_TX_DRIVER_240MV				0x5
-+#define PQSGMII_TX_DRIVER_260MV				0x6
-+#define PQSGMII_TX_DRIVER_280MV				0x7
-+#define PQSGMII_TX_DRIVER_300MV				0x8
-+#define PQSGMII_TX_DRIVER_320MV				0x9
-+#define PQSGMII_TX_DRIVER_400MV				0xa
-+#define PQSGMII_TX_DRIVER_500MV				0xb
-+#define PQSGMII_TX_DRIVER_600MV				0xc
-+#define PQSGMII_MODE_CTRL				0x6d
-+#define PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK		BIT(0)
-+#define PQSGMII_MMD3_SERDES_CONTROL			0x805a
-+
-+#define PHY_ID_QCA8072		0x004dd0b2
-+#define PHY_ID_QCA8075		0x004dd0b1
-+
-+#define QCA807X_COMBO_ADDR_OFFSET			4
-+#define QCA807X_PQSGMII_ADDR_OFFSET			5
-+#define SERDES_RESET_SLEEP				100
-+
-+enum qca807x_global_phy {
-+	QCA807X_COMBO_ADDR = 4,
-+	QCA807X_PQSGMII_ADDR = 5,
-+};
-+
-+struct qca807x_shared_priv {
-+	unsigned int package_mode;
-+	u32 tx_drive_strength;
-+};
-+
-+struct qca807x_gpio_priv {
-+	struct phy_device *phy;
-+};
-+
-+struct qca807x_priv {
-+	bool dac_full_amplitude;
-+	bool dac_full_bias_current;
-+	bool dac_disable_bias_current_tweak;
-+};
-+
-+static int qca807x_cable_test_start(struct phy_device *phydev)
-+{
-+	/* we do all the (time consuming) work later */
-+	return 0;
-+}
-+
-+#ifdef CONFIG_GPIOLIB
-+static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
-+{
-+	return GPIO_LINE_DIRECTION_OUT;
-+}
-+
-+static int qca807x_gpio_get(struct gpio_chip *gc, unsigned int offset)
-+{
-+	struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
-+	u16 reg;
-+	int val;
-+
-+	reg = QCA807X_MMD7_LED_FORCE_CTRL(offset);
-+	val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg);
-+
-+	return FIELD_GET(QCA807X_GPIO_FORCE_MODE_MASK, val);
-+}
-+
-+static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
-+{
-+	struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
-+	u16 reg;
-+	int val;
-+
-+	reg = QCA807X_MMD7_LED_FORCE_CTRL(offset);
-+
-+	val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg);
-+	val &= ~QCA807X_GPIO_FORCE_MODE_MASK;
-+	val |= QCA807X_GPIO_FORCE_EN;
-+	val |= FIELD_PREP(QCA807X_GPIO_FORCE_MODE_MASK, value);
-+
-+	phy_write_mmd(priv->phy, MDIO_MMD_AN, reg, val);
-+}
-+
-+static int qca807x_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int value)
-+{
-+	qca807x_gpio_set(gc, offset, value);
-+
-+	return 0;
-+}
-+
-+static int qca807x_gpio(struct phy_device *phydev)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	struct qca807x_gpio_priv *priv;
-+	struct gpio_chip *gc;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->phy = phydev;
-+
-+	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
-+	if (!gc)
-+		return -ENOMEM;
-+
-+	gc->label = dev_name(dev);
-+	gc->base = -1;
-+	gc->ngpio = 2;
-+	gc->parent = dev;
-+	gc->owner = THIS_MODULE;
-+	gc->can_sleep = true;
-+	gc->get_direction = qca807x_gpio_get_direction;
-+	gc->direction_output = qca807x_gpio_dir_out;
-+	gc->get = qca807x_gpio_get;
-+	gc->set = qca807x_gpio_set;
-+
-+	return devm_gpiochip_add_data(dev, gc, priv);
-+}
-+#endif
-+
-+static int qca807x_read_fiber_status(struct phy_device *phydev)
-+{
-+	bool changed;
-+	int ss, err;
-+
-+	err = genphy_c37_read_status(phydev, &changed);
-+	if (err || !changed)
-+		return err;
-+
-+	/* Read the QCA807x PHY-Specific Status register fiber page,
-+	 * which indicates the speed and duplex that the PHY is actually
-+	 * using, irrespective of whether we are in autoneg mode or not.
-+	 */
-+	ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
-+	if (ss < 0)
-+		return ss;
-+
-+	phydev->speed = SPEED_UNKNOWN;
-+	phydev->duplex = DUPLEX_UNKNOWN;
-+	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
-+		switch (FIELD_GET(AT803X_SS_SPEED_MASK, ss)) {
-+		case AT803X_SS_SPEED_100:
-+			phydev->speed = SPEED_100;
-+			break;
-+		case AT803X_SS_SPEED_1000:
-+			phydev->speed = SPEED_1000;
-+			break;
-+		}
-+
-+		if (ss & AT803X_SS_DUPLEX)
-+			phydev->duplex = DUPLEX_FULL;
-+		else
-+			phydev->duplex = DUPLEX_HALF;
-+	}
-+
-+	return 0;
-+}
-+
-+static int qca807x_read_status(struct phy_device *phydev)
-+{
-+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) {
-+		switch (phydev->port) {
-+		case PORT_FIBRE:
-+			return qca807x_read_fiber_status(phydev);
-+		case PORT_TP:
-+			return at803x_read_status(phydev);
-+		default:
-+			return -EINVAL;
-+		}
-+	}
-+
-+	return at803x_read_status(phydev);
-+}
-+
-+static int qca807x_phy_package_probe_once(struct phy_device *phydev)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+	struct qca807x_shared_priv *priv = shared->priv;
-+	unsigned int tx_drive_strength;
-+	const char *package_mode_name;
-+
-+	/* Default to 600mw if not defined */
-+	if (of_property_read_u32(shared->np, "qcom,tx-drive-strength-milliwatt",
-+				 &tx_drive_strength))
-+		tx_drive_strength = 600;
-+
-+	switch (tx_drive_strength) {
-+	case 140:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_140MV;
-+		break;
-+	case 160:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_160MV;
-+		break;
-+	case 180:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_180MV;
-+		break;
-+	case 200:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_200MV;
-+		break;
-+	case 220:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_220MV;
-+		break;
-+	case 240:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_240MV;
-+		break;
-+	case 260:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_260MV;
-+		break;
-+	case 280:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_280MV;
-+		break;
-+	case 300:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_300MV;
-+		break;
-+	case 320:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_320MV;
-+		break;
-+	case 400:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_400MV;
-+		break;
-+	case 500:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_500MV;
-+		break;
-+	case 600:
-+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_600MV;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	priv->package_mode = PHY_INTERFACE_MODE_NA;
-+	if (!of_property_read_string(shared->np, "qcom,package-mode",
-+				     &package_mode_name)) {
-+		if (!strcasecmp(package_mode_name,
-+				phy_modes(PHY_INTERFACE_MODE_PSGMII)))
-+			priv->package_mode = PHY_INTERFACE_MODE_PSGMII;
-+		else if (!strcasecmp(package_mode_name,
-+				     phy_modes(PHY_INTERFACE_MODE_QSGMII)))
-+			priv->package_mode = PHY_INTERFACE_MODE_QSGMII;
-+		else
-+			return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int qca807x_phy_package_config_init_once(struct phy_device *phydev)
-+{
-+	struct phy_package_shared *shared = phydev->shared;
-+	struct qca807x_shared_priv *priv = shared->priv;
-+	int val, ret;
-+
-+	phy_lock_mdio_bus(phydev);
-+
-+	/* Set correct PHY package mode */
-+	val = __phy_package_read(phydev, QCA807X_COMBO_ADDR,
-+				 QCA807X_CHIP_CONFIGURATION);
-+	val &= ~QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK;
-+	/* package_mode can be QSGMII or PSGMII and we validate
-+	 * this in probe_once.
-+	 * With package_mode to NA, we default to PSGMII.
-+	 */
-+	switch (priv->package_mode) {
-+	case PHY_INTERFACE_MODE_QSGMII:
-+		val |= QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII;
-+		break;
-+	case PHY_INTERFACE_MODE_PSGMII:
-+	default:
-+		val |= QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER;
-+	}
-+	ret = __phy_package_write(phydev, QCA807X_COMBO_ADDR,
-+				  QCA807X_CHIP_CONFIGURATION, val);
-+	if (ret)
-+		goto exit;
-+
-+	/* After mode change Serdes reset is required */
-+	val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
-+				 PQSGMII_CTRL_REG);
-+	val &= ~PQSGMII_ANALOG_SW_RESET;
-+	ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
-+				  PQSGMII_CTRL_REG, val);
-+	if (ret)
-+		goto exit;
-+
-+	msleep(SERDES_RESET_SLEEP);
-+
-+	val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
-+				 PQSGMII_CTRL_REG);
-+	val |= PQSGMII_ANALOG_SW_RESET;
-+	ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
-+				  PQSGMII_CTRL_REG, val);
-+	if (ret)
-+		goto exit;
-+
-+	/* Workaround to enable AZ transmitting ability */
-+	val = __phy_package_read_mmd(phydev, QCA807X_PQSGMII_ADDR,
-+				     MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL);
-+	val &= ~PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK;
-+	ret = __phy_package_write_mmd(phydev, QCA807X_PQSGMII_ADDR,
-+				      MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL, val);
-+	if (ret)
-+		goto exit;
-+
-+	/* Set PQSGMII TX AMP strength */
-+	val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
-+				 PQSGMII_DRIVE_CONTROL_1);
-+	val &= ~PQSGMII_TX_DRIVER_MASK;
-+	val |= FIELD_PREP(PQSGMII_TX_DRIVER_MASK, priv->tx_drive_strength);
-+	ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
-+				  PQSGMII_DRIVE_CONTROL_1, val);
-+	if (ret)
-+		goto exit;
-+
-+	/* Prevent PSGMII going into hibernation via PSGMII self test */
-+	val = __phy_package_read_mmd(phydev, QCA807X_COMBO_ADDR,
-+				     MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL);
-+	val &= ~BIT(1);
-+	ret = __phy_package_write_mmd(phydev, QCA807X_COMBO_ADDR,
-+				      MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL, val);
-+
-+exit:
-+	phy_unlock_mdio_bus(phydev);
-+
-+	return ret;
-+}
-+
-+static int qca807x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+	struct phy_device *phydev = upstream;
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+	phy_interface_t iface;
-+	int ret;
-+	DECLARE_PHY_INTERFACE_MASK(interfaces);
-+
-+	sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
-+	iface = sfp_select_interface(phydev->sfp_bus, support);
-+
-+	dev_info(&phydev->mdio.dev, "%s SFP module inserted\n", phy_modes(iface));
-+
-+	switch (iface) {
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+	case PHY_INTERFACE_MODE_100BASEX:
-+		/* Set PHY mode to PSGMII combo (1/4 copper + combo ports) mode */
-+		ret = phy_modify(phydev,
-+				 QCA807X_CHIP_CONFIGURATION,
-+				 QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK,
-+				 QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER);
-+		/* Enable fiber mode autodection (1000Base-X or 100Base-FX) */
-+		ret = phy_set_bits_mmd(phydev,
-+				       MDIO_MMD_AN,
-+				       QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION,
-+				       QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN);
-+		/* Select fiber page */
-+		ret = phy_clear_bits(phydev,
-+				     QCA807X_CHIP_CONFIGURATION,
-+				     QCA807X_BT_BX_REG_SEL);
-+
-+		phydev->port = PORT_FIBRE;
-+		break;
-+	default:
-+		dev_err(&phydev->mdio.dev, "Incompatible SFP module inserted\n");
-+		return -EINVAL;
-+	}
-+
-+	return ret;
-+}
-+
-+static void qca807x_sfp_remove(void *upstream)
-+{
-+	struct phy_device *phydev = upstream;
-+
-+	/* Select copper page */
-+	phy_set_bits(phydev,
-+		     QCA807X_CHIP_CONFIGURATION,
-+		     QCA807X_BT_BX_REG_SEL);
-+
-+	phydev->port = PORT_TP;
-+}
-+
-+static const struct sfp_upstream_ops qca807x_sfp_ops = {
-+	.attach = phy_sfp_attach,
-+	.detach = phy_sfp_detach,
-+	.module_insert = qca807x_sfp_insert,
-+	.module_remove = qca807x_sfp_remove,
-+};
-+
-+static int qca807x_probe(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	struct qca807x_shared_priv *shared_priv;
-+	struct device *dev = &phydev->mdio.dev;
-+	struct phy_package_shared *shared;
-+	struct qca807x_priv *priv;
-+	int ret;
-+
-+	ret = devm_of_phy_package_join(dev, phydev, sizeof(*shared_priv));
-+	if (ret)
-+		return ret;
-+
-+	if (phy_package_probe_once(phydev)) {
-+		ret = qca807x_phy_package_probe_once(phydev);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	shared = phydev->shared;
-+	shared_priv = shared->priv;
-+
-+	/* Make sure PHY follow PHY package mode if enforced */
-+	if (shared_priv->package_mode != PHY_INTERFACE_MODE_NA &&
-+	    phydev->interface != shared_priv->package_mode)
-+		return -EINVAL;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->dac_full_amplitude = of_property_read_bool(node, "qcom,dac-full-amplitude");
-+	priv->dac_full_bias_current = of_property_read_bool(node, "qcom,dac-full-bias-current");
-+	priv->dac_disable_bias_current_tweak = of_property_read_bool(node,
-+								     "qcom,dac-disable-bias-current-tweak");
-+
-+	if (IS_ENABLED(CONFIG_GPIOLIB)) {
-+		/* Do not register a GPIO controller unless flagged for it */
-+		if (of_property_read_bool(node, "gpio-controller")) {
-+			ret = qca807x_gpio(phydev);
-+			if (ret)
-+				return ret;
-+		}
-+	}
-+
-+	/* Attach SFP bus on combo port*/
-+	if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
-+		ret = phy_sfp_probe(phydev, &qca807x_sfp_ops);
-+		if (ret)
-+			return ret;
-+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
-+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->advertising);
-+	}
-+
-+	phydev->priv = priv;
-+
-+	return 0;
-+}
-+
-+static int qca807x_config_init(struct phy_device *phydev)
-+{
-+	struct qca807x_priv *priv = phydev->priv;
-+	u16 control_dac;
-+	int ret;
-+
-+	if (phy_package_init_once(phydev)) {
-+		ret = qca807x_phy_package_config_init_once(phydev);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	control_dac = phy_read_mmd(phydev, MDIO_MMD_AN,
-+				   QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH);
-+	control_dac &= ~QCA807X_CONTROL_DAC_MASK;
-+	if (!priv->dac_full_amplitude)
-+		control_dac |= QCA807X_CONTROL_DAC_DSP_AMPLITUDE;
-+	if (!priv->dac_full_amplitude)
-+		control_dac |= QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT;
-+	if (!priv->dac_disable_bias_current_tweak)
-+		control_dac |= QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK;
-+	return phy_write_mmd(phydev, MDIO_MMD_AN,
-+			     QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH,
-+			     control_dac);
-+}
-+
-+static struct phy_driver qca807x_drivers[] = {
-+	{
-+		PHY_ID_MATCH_EXACT(PHY_ID_QCA8072),
-+		.name           = "Qualcomm QCA8072",
-+		.flags		= PHY_POLL_CABLE_TEST,
-+		/* PHY_GBIT_FEATURES */
-+		.probe		= qca807x_probe,
-+		.config_init	= qca807x_config_init,
-+		.read_status	= qca807x_read_status,
-+		.config_intr	= at803x_config_intr,
-+		.handle_interrupt = at803x_handle_interrupt,
-+		.soft_reset	= genphy_soft_reset,
-+		.get_tunable	= at803x_get_tunable,
-+		.set_tunable	= at803x_set_tunable,
-+		.resume		= genphy_resume,
-+		.suspend	= genphy_suspend,
-+		.cable_test_start	= qca807x_cable_test_start,
-+		.cable_test_get_status	= qca808x_cable_test_get_status,
-+	},
-+	{
-+		PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
-+		.name           = "Qualcomm QCA8075",
-+		.flags		= PHY_POLL_CABLE_TEST,
-+		/* PHY_GBIT_FEATURES */
-+		.probe		= qca807x_probe,
-+		.config_init	= qca807x_config_init,
-+		.read_status	= qca807x_read_status,
-+		.config_intr	= at803x_config_intr,
-+		.handle_interrupt = at803x_handle_interrupt,
-+		.soft_reset	= genphy_soft_reset,
-+		.get_tunable	= at803x_get_tunable,
-+		.set_tunable	= at803x_set_tunable,
-+		.resume		= genphy_resume,
-+		.suspend	= genphy_suspend,
-+		.cable_test_start	= qca807x_cable_test_start,
-+		.cable_test_get_status	= qca808x_cable_test_get_status,
-+	},
-+};
-+module_phy_driver(qca807x_drivers);
-+
-+static struct mdio_device_id __maybe_unused qca807x_tbl[] = {
-+	{ PHY_ID_MATCH_EXACT(PHY_ID_QCA8072) },
-+	{ PHY_ID_MATCH_EXACT(PHY_ID_QCA8075) },
-+	{ }
-+};
-+
-+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
-+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
-+MODULE_DESCRIPTION("Qualcomm QCA807x PHY driver");
-+MODULE_DEVICE_TABLE(mdio, qca807x_tbl);
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-6.1/716-v6.9-08-net-phy-qcom-move-common-qca808x-LED-define-to-share.patch b/target/linux/generic/backport-6.1/716-v6.9-08-net-phy-qcom-move-common-qca808x-LED-define-to-share.patch
deleted file mode 100644
index cf4d74e8c523..000000000000
--- a/target/linux/generic/backport-6.1/716-v6.9-08-net-phy-qcom-move-common-qca808x-LED-define-to-share.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-From ee9d9807bee0e6af8ca2a4db6f0d1dc0e5b41f44 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 6 Feb 2024 18:31:11 +0100
-Subject: [PATCH 08/10] net: phy: qcom: move common qca808x LED define to
- shared header
-
-The LED implementation of qca808x and qca807x is the same but qca807x
-supports also Fiber port and have different hw control bits for Fiber
-port.
-
-In preparation for qca807x introduction, move all the common define to
-shared header.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/qcom/qca808x.c | 65 ----------------------------------
- drivers/net/phy/qcom/qcom.h    | 65 ++++++++++++++++++++++++++++++++++
- 2 files changed, 65 insertions(+), 65 deletions(-)
-
---- a/drivers/net/phy/qcom/qca808x.c
-+++ b/drivers/net/phy/qcom/qca808x.c
-@@ -62,29 +62,6 @@
- #define QCA808X_DBG_AN_TEST			0xb
- #define QCA808X_HIBERNATION_EN			BIT(15)
- 
--#define QCA808X_MMD7_LED_GLOBAL			0x8073
--#define QCA808X_LED_BLINK_1			GENMASK(11, 6)
--#define QCA808X_LED_BLINK_2			GENMASK(5, 0)
--/* Values are the same for both BLINK_1 and BLINK_2 */
--#define QCA808X_LED_BLINK_FREQ_MASK		GENMASK(5, 3)
--#define QCA808X_LED_BLINK_FREQ_2HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
--#define QCA808X_LED_BLINK_FREQ_4HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
--#define QCA808X_LED_BLINK_FREQ_8HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
--#define QCA808X_LED_BLINK_FREQ_16HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
--#define QCA808X_LED_BLINK_FREQ_32HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
--#define QCA808X_LED_BLINK_FREQ_64HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
--#define QCA808X_LED_BLINK_FREQ_128HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
--#define QCA808X_LED_BLINK_FREQ_256HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
--#define QCA808X_LED_BLINK_DUTY_MASK		GENMASK(2, 0)
--#define QCA808X_LED_BLINK_DUTY_50_50		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
--#define QCA808X_LED_BLINK_DUTY_75_25		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
--#define QCA808X_LED_BLINK_DUTY_25_75		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
--#define QCA808X_LED_BLINK_DUTY_33_67		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
--#define QCA808X_LED_BLINK_DUTY_67_33		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
--#define QCA808X_LED_BLINK_DUTY_17_83		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
--#define QCA808X_LED_BLINK_DUTY_83_17		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
--#define QCA808X_LED_BLINK_DUTY_8_92		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
--
- #define QCA808X_MMD7_LED2_CTRL			0x8074
- #define QCA808X_MMD7_LED2_FORCE_CTRL		0x8075
- #define QCA808X_MMD7_LED1_CTRL			0x8076
-@@ -92,51 +69,9 @@
- #define QCA808X_MMD7_LED0_CTRL			0x8078
- #define QCA808X_MMD7_LED_CTRL(x)		(0x8078 - ((x) * 2))
- 
--/* LED hw control pattern is the same for every LED */
--#define QCA808X_LED_PATTERN_MASK		GENMASK(15, 0)
--#define QCA808X_LED_SPEED2500_ON		BIT(15)
--#define QCA808X_LED_SPEED2500_BLINK		BIT(14)
--/* Follow blink trigger even if duplex or speed condition doesn't match */
--#define QCA808X_LED_BLINK_CHECK_BYPASS		BIT(13)
--#define QCA808X_LED_FULL_DUPLEX_ON		BIT(12)
--#define QCA808X_LED_HALF_DUPLEX_ON		BIT(11)
--#define QCA808X_LED_TX_BLINK			BIT(10)
--#define QCA808X_LED_RX_BLINK			BIT(9)
--#define QCA808X_LED_TX_ON_10MS			BIT(8)
--#define QCA808X_LED_RX_ON_10MS			BIT(7)
--#define QCA808X_LED_SPEED1000_ON		BIT(6)
--#define QCA808X_LED_SPEED100_ON			BIT(5)
--#define QCA808X_LED_SPEED10_ON			BIT(4)
--#define QCA808X_LED_COLLISION_BLINK		BIT(3)
--#define QCA808X_LED_SPEED1000_BLINK		BIT(2)
--#define QCA808X_LED_SPEED100_BLINK		BIT(1)
--#define QCA808X_LED_SPEED10_BLINK		BIT(0)
--
- #define QCA808X_MMD7_LED0_FORCE_CTRL		0x8079
- #define QCA808X_MMD7_LED_FORCE_CTRL(x)		(0x8079 - ((x) * 2))
- 
--/* LED force ctrl is the same for every LED
-- * No documentation exist for this, not even internal one
-- * with NDA as QCOM gives only info about configuring
-- * hw control pattern rules and doesn't indicate any way
-- * to force the LED to specific mode.
-- * These define comes from reverse and testing and maybe
-- * lack of some info or some info are not entirely correct.
-- * For the basic LED control and hw control these finding
-- * are enough to support LED control in all the required APIs.
-- *
-- * On doing some comparison with implementation with qca807x,
-- * it was found that it's 1:1 equal to it and confirms all the
-- * reverse done. It was also found further specification with the
-- * force mode and the blink modes.
-- */
--#define QCA808X_LED_FORCE_EN			BIT(15)
--#define QCA808X_LED_FORCE_MODE_MASK		GENMASK(14, 13)
--#define QCA808X_LED_FORCE_BLINK_1		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
--#define QCA808X_LED_FORCE_BLINK_2		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
--#define QCA808X_LED_FORCE_ON			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
--#define QCA808X_LED_FORCE_OFF			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
--
- #define QCA808X_MMD7_LED_POLARITY_CTRL		0x901a
- /* QSDK sets by default 0x46 to this reg that sets BIT 6 for
-  * LED to active high. It's not clear what BIT 3 and BIT 4 does.
---- a/drivers/net/phy/qcom/qcom.h
-+++ b/drivers/net/phy/qcom/qcom.h
-@@ -103,6 +103,71 @@
- /* Added for reference of existence but should be handled by wait_for_completion already */
- #define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
- 
-+#define QCA808X_MMD7_LED_GLOBAL			0x8073
-+#define QCA808X_LED_BLINK_1			GENMASK(11, 6)
-+#define QCA808X_LED_BLINK_2			GENMASK(5, 0)
-+/* Values are the same for both BLINK_1 and BLINK_2 */
-+#define QCA808X_LED_BLINK_FREQ_MASK		GENMASK(5, 3)
-+#define QCA808X_LED_BLINK_FREQ_2HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
-+#define QCA808X_LED_BLINK_FREQ_4HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
-+#define QCA808X_LED_BLINK_FREQ_8HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
-+#define QCA808X_LED_BLINK_FREQ_16HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
-+#define QCA808X_LED_BLINK_FREQ_32HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
-+#define QCA808X_LED_BLINK_FREQ_64HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
-+#define QCA808X_LED_BLINK_FREQ_128HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
-+#define QCA808X_LED_BLINK_FREQ_256HZ		FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
-+#define QCA808X_LED_BLINK_DUTY_MASK		GENMASK(2, 0)
-+#define QCA808X_LED_BLINK_DUTY_50_50		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
-+#define QCA808X_LED_BLINK_DUTY_75_25		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
-+#define QCA808X_LED_BLINK_DUTY_25_75		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
-+#define QCA808X_LED_BLINK_DUTY_33_67		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
-+#define QCA808X_LED_BLINK_DUTY_67_33		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
-+#define QCA808X_LED_BLINK_DUTY_17_83		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
-+#define QCA808X_LED_BLINK_DUTY_83_17		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
-+#define QCA808X_LED_BLINK_DUTY_8_92		FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
-+
-+/* LED hw control pattern is the same for every LED */
-+#define QCA808X_LED_PATTERN_MASK		GENMASK(15, 0)
-+#define QCA808X_LED_SPEED2500_ON		BIT(15)
-+#define QCA808X_LED_SPEED2500_BLINK		BIT(14)
-+/* Follow blink trigger even if duplex or speed condition doesn't match */
-+#define QCA808X_LED_BLINK_CHECK_BYPASS		BIT(13)
-+#define QCA808X_LED_FULL_DUPLEX_ON		BIT(12)
-+#define QCA808X_LED_HALF_DUPLEX_ON		BIT(11)
-+#define QCA808X_LED_TX_BLINK			BIT(10)
-+#define QCA808X_LED_RX_BLINK			BIT(9)
-+#define QCA808X_LED_TX_ON_10MS			BIT(8)
-+#define QCA808X_LED_RX_ON_10MS			BIT(7)
-+#define QCA808X_LED_SPEED1000_ON		BIT(6)
-+#define QCA808X_LED_SPEED100_ON			BIT(5)
-+#define QCA808X_LED_SPEED10_ON			BIT(4)
-+#define QCA808X_LED_COLLISION_BLINK		BIT(3)
-+#define QCA808X_LED_SPEED1000_BLINK		BIT(2)
-+#define QCA808X_LED_SPEED100_BLINK		BIT(1)
-+#define QCA808X_LED_SPEED10_BLINK		BIT(0)
-+
-+/* LED force ctrl is the same for every LED
-+ * No documentation exist for this, not even internal one
-+ * with NDA as QCOM gives only info about configuring
-+ * hw control pattern rules and doesn't indicate any way
-+ * to force the LED to specific mode.
-+ * These define comes from reverse and testing and maybe
-+ * lack of some info or some info are not entirely correct.
-+ * For the basic LED control and hw control these finding
-+ * are enough to support LED control in all the required APIs.
-+ *
-+ * On doing some comparison with implementation with qca807x,
-+ * it was found that it's 1:1 equal to it and confirms all the
-+ * reverse done. It was also found further specification with the
-+ * force mode and the blink modes.
-+ */
-+#define QCA808X_LED_FORCE_EN			BIT(15)
-+#define QCA808X_LED_FORCE_MODE_MASK		GENMASK(14, 13)
-+#define QCA808X_LED_FORCE_BLINK_1		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
-+#define QCA808X_LED_FORCE_BLINK_2		FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
-+#define QCA808X_LED_FORCE_ON			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
-+#define QCA808X_LED_FORCE_OFF			FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
-+
- #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
- #define AT803X_LOC_MAC_ADDR_16_31_OFFSET	0x804B
- #define AT803X_LOC_MAC_ADDR_32_47_OFFSET	0x804A
diff --git a/target/linux/generic/backport-6.1/716-v6.9-09-net-phy-qcom-generalize-some-qca808x-LED-functions.patch b/target/linux/generic/backport-6.1/716-v6.9-09-net-phy-qcom-generalize-some-qca808x-LED-functions.patch
deleted file mode 100644
index da73c1d3b898..000000000000
--- a/target/linux/generic/backport-6.1/716-v6.9-09-net-phy-qcom-generalize-some-qca808x-LED-functions.patch
+++ /dev/null
@@ -1,172 +0,0 @@
-From 47b930d0dd437af927145dba50a2e2ea1ba97c67 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 6 Feb 2024 18:31:12 +0100
-Subject: [PATCH 09/10] net: phy: qcom: generalize some qca808x LED functions
-
-Generalize some qca808x LED functions in preparation for qca807x LED
-support.
-
-The LED implementation of qca808x and qca807x is the same but qca807x
-supports also Fiber port and have different hw control bits for Fiber
-port. To limit code duplication introduce micro functions that takes reg
-instead of LED index to tweak all the supported LED modes.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/qcom/qca808x.c      | 38 +++-----------------
- drivers/net/phy/qcom/qcom-phy-lib.c | 54 +++++++++++++++++++++++++++++
- drivers/net/phy/qcom/qcom.h         |  7 ++++
- 3 files changed, 65 insertions(+), 34 deletions(-)
-
---- a/drivers/net/phy/qcom/qca808x.c
-+++ b/drivers/net/phy/qcom/qca808x.c
-@@ -437,9 +437,7 @@ static int qca808x_led_hw_control_enable
- 		return -EINVAL;
- 
- 	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
--				  QCA808X_LED_FORCE_EN);
-+	return qca808x_led_reg_hw_control_enable(phydev, reg);
- }
- 
- static int qca808x_led_hw_is_supported(struct phy_device *phydev, u8 index,
-@@ -480,16 +478,12 @@ static int qca808x_led_hw_control_set(st
- static bool qca808x_led_hw_control_status(struct phy_device *phydev, u8 index)
- {
- 	u16 reg;
--	int val;
- 
- 	if (index > 2)
- 		return false;
- 
- 	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
--
--	return !(val & QCA808X_LED_FORCE_EN);
-+	return qca808x_led_reg_hw_control_status(phydev, reg);
- }
- 
- static int qca808x_led_hw_control_get(struct phy_device *phydev, u8 index,
-@@ -557,44 +551,20 @@ static int qca808x_led_brightness_set(st
- 	}
- 
- 	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
--			      QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
--			      QCA808X_LED_FORCE_EN | (value ? QCA808X_LED_FORCE_ON :
--							     QCA808X_LED_FORCE_OFF));
-+	return qca808x_led_reg_brightness_set(phydev, reg, value);
- }
- 
- static int qca808x_led_blink_set(struct phy_device *phydev, u8 index,
- 				 unsigned long *delay_on,
- 				 unsigned long *delay_off)
- {
--	int ret;
- 	u16 reg;
- 
- 	if (index > 2)
- 		return -EINVAL;
- 
- 	reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
--
--	/* Set blink to 50% off, 50% on at 4Hz by default */
--	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
--			     QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
--			     QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
--	if (ret)
--		return ret;
--
--	/* We use BLINK_1 for normal blinking */
--	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
--			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
--			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
--	if (ret)
--		return ret;
--
--	/* We set blink to 4Hz, aka 250ms */
--	*delay_on = 250 / 2;
--	*delay_off = 250 / 2;
--
--	return 0;
-+	return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off);
- }
- 
- static int qca808x_led_polarity_set(struct phy_device *phydev, int index,
---- a/drivers/net/phy/qcom/qcom-phy-lib.c
-+++ b/drivers/net/phy/qcom/qcom-phy-lib.c
-@@ -620,3 +620,57 @@ int qca808x_cable_test_get_status(struct
- 	return 0;
- }
- EXPORT_SYMBOL_GPL(qca808x_cable_test_get_status);
-+
-+int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg)
-+{
-+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
-+				  QCA808X_LED_FORCE_EN);
-+}
-+EXPORT_SYMBOL_GPL(qca808x_led_reg_hw_control_enable);
-+
-+bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg)
-+{
-+	int val;
-+
-+	val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-+	return !(val & QCA808X_LED_FORCE_EN);
-+}
-+EXPORT_SYMBOL_GPL(qca808x_led_reg_hw_control_status);
-+
-+int qca808x_led_reg_brightness_set(struct phy_device *phydev,
-+				   u16 reg, enum led_brightness value)
-+{
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			      QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
-+			      QCA808X_LED_FORCE_EN | (value ? QCA808X_LED_FORCE_ON :
-+							      QCA808X_LED_FORCE_OFF));
-+}
-+EXPORT_SYMBOL_GPL(qca808x_led_reg_brightness_set);
-+
-+int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg,
-+			      unsigned long *delay_on,
-+			      unsigned long *delay_off)
-+{
-+	int ret;
-+
-+	/* Set blink to 50% off, 50% on at 4Hz by default */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
-+			     QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
-+			     QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
-+	if (ret)
-+		return ret;
-+
-+	/* We use BLINK_1 for normal blinking */
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
-+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
-+			     QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
-+	if (ret)
-+		return ret;
-+
-+	/* We set blink to 4Hz, aka 250ms */
-+	*delay_on = 250 / 2;
-+	*delay_off = 250 / 2;
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(qca808x_led_reg_blink_set);
---- a/drivers/net/phy/qcom/qcom.h
-+++ b/drivers/net/phy/qcom/qcom.h
-@@ -234,3 +234,10 @@ int at803x_cdt_start(struct phy_device *
- int at803x_cdt_wait_for_completion(struct phy_device *phydev,
- 				   u32 cdt_en);
- int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished);
-+int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg);
-+bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg);
-+int qca808x_led_reg_brightness_set(struct phy_device *phydev,
-+				   u16 reg, enum led_brightness value);
-+int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg,
-+			      unsigned long *delay_on,
-+			      unsigned long *delay_off);
diff --git a/target/linux/generic/backport-6.1/716-v6.9-10-net-phy-qca807x-add-support-for-configurable-LED.patch b/target/linux/generic/backport-6.1/716-v6.9-10-net-phy-qca807x-add-support-for-configurable-LED.patch
deleted file mode 100644
index 3bd36f6ffe2f..000000000000
--- a/target/linux/generic/backport-6.1/716-v6.9-10-net-phy-qca807x-add-support-for-configurable-LED.patch
+++ /dev/null
@@ -1,326 +0,0 @@
-From f508a226b517a6a8afd78a317de46bc83e3e3d51 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 6 Feb 2024 18:31:13 +0100
-Subject: [PATCH 10/10] net: phy: qca807x: add support for configurable LED
-
-QCA8072/5 have up to 2 LEDs attached for PHY.
-
-LEDs can be configured to be ON/hw blink or be set to HW control.
-
-Hw blink mode is set to blink at 4Hz or 250ms.
-
-PHY can support both copper (TP) or fiber (FIBRE) kind and supports
-different HW control modes based on the port type.
-
-HW control modes supported for netdev trigger for copper ports are:
-- LINK_10
-- LINK_100
-- LINK_1000
-- TX
-- RX
-- FULL_DUPLEX
-- HALF_DUPLEX
-
-HW control modes supported for netdev trigger for fiber ports are:
-- LINK_100
-- LINK_1000
-- TX
-- RX
-- FULL_DUPLEX
-- HALF_DUPLEX
-
-LED support conflicts with GPIO controller feature and must be disabled
-if gpio-controller is used for the PHY.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/qcom/qca807x.c | 256 ++++++++++++++++++++++++++++++++-
- 1 file changed, 254 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/qcom/qca807x.c
-+++ b/drivers/net/phy/qcom/qca807x.c
-@@ -57,8 +57,18 @@
- #define QCA807X_MMD7_LED_CTRL(x)			(0x8074 + ((x) * 2))
- #define QCA807X_MMD7_LED_FORCE_CTRL(x)			(0x8075 + ((x) * 2))
- 
--#define QCA807X_GPIO_FORCE_EN				BIT(15)
--#define QCA807X_GPIO_FORCE_MODE_MASK			GENMASK(14, 13)
-+/* LED hw control pattern for fiber port */
-+#define QCA807X_LED_FIBER_PATTERN_MASK			GENMASK(11, 1)
-+#define QCA807X_LED_FIBER_TXACT_BLK_EN			BIT(10)
-+#define QCA807X_LED_FIBER_RXACT_BLK_EN			BIT(9)
-+#define QCA807X_LED_FIBER_FDX_ON_EN			BIT(6)
-+#define QCA807X_LED_FIBER_HDX_ON_EN			BIT(5)
-+#define QCA807X_LED_FIBER_1000BX_ON_EN			BIT(2)
-+#define QCA807X_LED_FIBER_100FX_ON_EN			BIT(1)
-+
-+/* Some device repurpose the LED as GPIO out */
-+#define QCA807X_GPIO_FORCE_EN				QCA808X_LED_FORCE_EN
-+#define QCA807X_GPIO_FORCE_MODE_MASK			QCA808X_LED_FORCE_MODE_MASK
- 
- #define QCA807X_FUNCTION_CONTROL			0x10
- #define QCA807X_FC_MDI_CROSSOVER_MODE_MASK		GENMASK(6, 5)
-@@ -121,6 +131,233 @@ static int qca807x_cable_test_start(stru
- 	return 0;
- }
- 
-+static int qca807x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
-+				    u16 *offload_trigger)
-+{
-+	/* Parsing specific to netdev trigger */
-+	switch (phydev->port) {
-+	case PORT_TP:
-+		if (test_bit(TRIGGER_NETDEV_TX, &rules))
-+			*offload_trigger |= QCA808X_LED_TX_BLINK;
-+		if (test_bit(TRIGGER_NETDEV_RX, &rules))
-+			*offload_trigger |= QCA808X_LED_RX_BLINK;
-+		if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
-+			*offload_trigger |= QCA808X_LED_SPEED10_ON;
-+		if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
-+			*offload_trigger |= QCA808X_LED_SPEED100_ON;
-+		if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
-+			*offload_trigger |= QCA808X_LED_SPEED1000_ON;
-+		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
-+			*offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
-+		if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
-+			*offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
-+		break;
-+	case PORT_FIBRE:
-+		if (test_bit(TRIGGER_NETDEV_TX, &rules))
-+			*offload_trigger |= QCA807X_LED_FIBER_TXACT_BLK_EN;
-+		if (test_bit(TRIGGER_NETDEV_RX, &rules))
-+			*offload_trigger |= QCA807X_LED_FIBER_RXACT_BLK_EN;
-+		if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
-+			*offload_trigger |= QCA807X_LED_FIBER_100FX_ON_EN;
-+		if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
-+			*offload_trigger |= QCA807X_LED_FIBER_1000BX_ON_EN;
-+		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
-+			*offload_trigger |= QCA807X_LED_FIBER_HDX_ON_EN;
-+		if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
-+			*offload_trigger |= QCA807X_LED_FIBER_FDX_ON_EN;
-+		break;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (rules && !*offload_trigger)
-+		return -EOPNOTSUPP;
-+
-+	return 0;
-+}
-+
-+static int qca807x_led_hw_control_enable(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+
-+	if (index > 1)
-+		return -EINVAL;
-+
-+	reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
-+	return qca808x_led_reg_hw_control_enable(phydev, reg);
-+}
-+
-+static int qca807x_led_hw_is_supported(struct phy_device *phydev, u8 index,
-+				       unsigned long rules)
-+{
-+	u16 offload_trigger = 0;
-+
-+	if (index > 1)
-+		return -EINVAL;
-+
-+	return qca807x_led_parse_netdev(phydev, rules, &offload_trigger);
-+}
-+
-+static int qca807x_led_hw_control_set(struct phy_device *phydev, u8 index,
-+				      unsigned long rules)
-+{
-+	u16 reg, mask, offload_trigger = 0;
-+	int ret;
-+
-+	if (index > 1)
-+		return -EINVAL;
-+
-+	ret = qca807x_led_parse_netdev(phydev, rules, &offload_trigger);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca807x_led_hw_control_enable(phydev, index);
-+	if (ret)
-+		return ret;
-+
-+	switch (phydev->port) {
-+	case PORT_TP:
-+		reg = QCA807X_MMD7_LED_CTRL(index);
-+		mask = QCA808X_LED_PATTERN_MASK;
-+		break;
-+	case PORT_FIBRE:
-+		/* HW control pattern bits are in LED FORCE reg */
-+		reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
-+		mask = QCA807X_LED_FIBER_PATTERN_MASK;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return phy_modify_mmd(phydev, MDIO_MMD_AN, reg, mask,
-+			      offload_trigger);
-+}
-+
-+static bool qca807x_led_hw_control_status(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg;
-+
-+	if (index > 1)
-+		return false;
-+
-+	reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
-+	return qca808x_led_reg_hw_control_status(phydev, reg);
-+}
-+
-+static int qca807x_led_hw_control_get(struct phy_device *phydev, u8 index,
-+				      unsigned long *rules)
-+{
-+	u16 reg;
-+	int val;
-+
-+	if (index > 1)
-+		return -EINVAL;
-+
-+	/* Check if we have hw control enabled */
-+	if (qca807x_led_hw_control_status(phydev, index))
-+		return -EINVAL;
-+
-+	/* Parsing specific to netdev trigger */
-+	switch (phydev->port) {
-+	case PORT_TP:
-+		reg = QCA807X_MMD7_LED_CTRL(index);
-+		val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-+		if (val & QCA808X_LED_TX_BLINK)
-+			set_bit(TRIGGER_NETDEV_TX, rules);
-+		if (val & QCA808X_LED_RX_BLINK)
-+			set_bit(TRIGGER_NETDEV_RX, rules);
-+		if (val & QCA808X_LED_SPEED10_ON)
-+			set_bit(TRIGGER_NETDEV_LINK_10, rules);
-+		if (val & QCA808X_LED_SPEED100_ON)
-+			set_bit(TRIGGER_NETDEV_LINK_100, rules);
-+		if (val & QCA808X_LED_SPEED1000_ON)
-+			set_bit(TRIGGER_NETDEV_LINK_1000, rules);
-+		if (val & QCA808X_LED_HALF_DUPLEX_ON)
-+			set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
-+		if (val & QCA808X_LED_FULL_DUPLEX_ON)
-+			set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
-+		break;
-+	case PORT_FIBRE:
-+		/* HW control pattern bits are in LED FORCE reg */
-+		reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
-+		val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-+		if (val & QCA807X_LED_FIBER_TXACT_BLK_EN)
-+			set_bit(TRIGGER_NETDEV_TX, rules);
-+		if (val & QCA807X_LED_FIBER_RXACT_BLK_EN)
-+			set_bit(TRIGGER_NETDEV_RX, rules);
-+		if (val & QCA807X_LED_FIBER_100FX_ON_EN)
-+			set_bit(TRIGGER_NETDEV_LINK_100, rules);
-+		if (val & QCA807X_LED_FIBER_1000BX_ON_EN)
-+			set_bit(TRIGGER_NETDEV_LINK_1000, rules);
-+		if (val & QCA807X_LED_FIBER_HDX_ON_EN)
-+			set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
-+		if (val & QCA807X_LED_FIBER_FDX_ON_EN)
-+			set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int qca807x_led_hw_control_reset(struct phy_device *phydev, u8 index)
-+{
-+	u16 reg, mask;
-+
-+	if (index > 1)
-+		return -EINVAL;
-+
-+	switch (phydev->port) {
-+	case PORT_TP:
-+		reg = QCA807X_MMD7_LED_CTRL(index);
-+		mask = QCA808X_LED_PATTERN_MASK;
-+		break;
-+	case PORT_FIBRE:
-+		/* HW control pattern bits are in LED FORCE reg */
-+		reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
-+		mask = QCA807X_LED_FIBER_PATTERN_MASK;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg, mask);
-+}
-+
-+static int qca807x_led_brightness_set(struct phy_device *phydev,
-+				      u8 index, enum led_brightness value)
-+{
-+	u16 reg;
-+	int ret;
-+
-+	if (index > 1)
-+		return -EINVAL;
-+
-+	/* If we are setting off the LED reset any hw control rule */
-+	if (!value) {
-+		ret = qca807x_led_hw_control_reset(phydev, index);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
-+	return qca808x_led_reg_brightness_set(phydev, reg, value);
-+}
-+
-+static int qca807x_led_blink_set(struct phy_device *phydev, u8 index,
-+				 unsigned long *delay_on,
-+				 unsigned long *delay_off)
-+{
-+	u16 reg;
-+
-+	if (index > 1)
-+		return -EINVAL;
-+
-+	reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
-+	return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off);
-+}
-+
- #ifdef CONFIG_GPIOLIB
- static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
- {
-@@ -496,6 +733,16 @@ static int qca807x_probe(struct phy_devi
- 								     "qcom,dac-disable-bias-current-tweak");
- 
- 	if (IS_ENABLED(CONFIG_GPIOLIB)) {
-+		/* Make sure we don't have mixed leds node and gpio-controller
-+		 * to prevent registering leds and having gpio-controller usage
-+		 * conflicting with them.
-+		 */
-+		if (of_find_property(node, "leds", NULL) &&
-+		    of_find_property(node, "gpio-controller", NULL)) {
-+			phydev_err(phydev, "Invalid property detected. LEDs and gpio-controller are mutually exclusive.");
-+			return -EINVAL;
-+		}
-+
- 		/* Do not register a GPIO controller unless flagged for it */
- 		if (of_property_read_bool(node, "gpio-controller")) {
- 			ret = qca807x_gpio(phydev);
-@@ -580,6 +827,11 @@ static struct phy_driver qca807x_drivers
- 		.suspend	= genphy_suspend,
- 		.cable_test_start	= qca807x_cable_test_start,
- 		.cable_test_get_status	= qca808x_cable_test_get_status,
-+		.led_brightness_set = qca807x_led_brightness_set,
-+		.led_blink_set = qca807x_led_blink_set,
-+		.led_hw_is_supported = qca807x_led_hw_is_supported,
-+		.led_hw_control_set = qca807x_led_hw_control_set,
-+		.led_hw_control_get = qca807x_led_hw_control_get,
- 	},
- };
- module_phy_driver(qca807x_drivers);
diff --git a/target/linux/generic/backport-6.1/717-v6.9-net-phy-qca807x-move-interface-mode-check-to-.config.patch b/target/linux/generic/backport-6.1/717-v6.9-net-phy-qca807x-move-interface-mode-check-to-.config.patch
deleted file mode 100644
index 53652c38fc05..000000000000
--- a/target/linux/generic/backport-6.1/717-v6.9-net-phy-qca807x-move-interface-mode-check-to-.config.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 3be0d950b62852a693182cb678948f481de02825 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 12 Feb 2024 12:49:34 +0100
-Subject: [PATCH] net: phy: qca807x: move interface mode check to
- .config_init_once
-
-Currently, we are checking whether the PHY package mode matches the
-individual PHY interface modes at PHY package probe time, but at that time
-we only know the PHY package mode and not the individual PHY interface
-modes as of_get_phy_mode() that populates it will only get called once the
-netdev to which PHY-s are attached to is being probed and thus this check
-will always fail and return -EINVAL.
-
-So, lets move this check to .config_init_once as at that point individual
-PHY interface modes should be populated.
-
-Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family")
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240212115043.1725918-1-robimarko@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/phy/qcom/qca807x.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/qcom/qca807x.c
-+++ b/drivers/net/phy/qcom/qca807x.c
-@@ -562,6 +562,11 @@ static int qca807x_phy_package_config_in
- 	struct qca807x_shared_priv *priv = shared->priv;
- 	int val, ret;
- 
-+	/* Make sure PHY follow PHY package mode if enforced */
-+	if (priv->package_mode != PHY_INTERFACE_MODE_NA &&
-+	    phydev->interface != priv->package_mode)
-+		return -EINVAL;
-+
- 	phy_lock_mdio_bus(phydev);
- 
- 	/* Set correct PHY package mode */
-@@ -718,11 +723,6 @@ static int qca807x_probe(struct phy_devi
- 	shared = phydev->shared;
- 	shared_priv = shared->priv;
- 
--	/* Make sure PHY follow PHY package mode if enforced */
--	if (shared_priv->package_mode != PHY_INTERFACE_MODE_NA &&
--	    phydev->interface != shared_priv->package_mode)
--		return -EINVAL;
--
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
- 		return -ENOMEM;
diff --git a/target/linux/generic/backport-6.1/718-v6.9-net-phy-qcom-at803x-fix-kernel-panic-with-at8031_pro.patch b/target/linux/generic/backport-6.1/718-v6.9-net-phy-qcom-at803x-fix-kernel-panic-with-at8031_pro.patch
deleted file mode 100644
index 9b9ce2a3cd01..000000000000
--- a/target/linux/generic/backport-6.1/718-v6.9-net-phy-qcom-at803x-fix-kernel-panic-with-at8031_pro.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 6a4aee277740d04ac0fd54cfa17cc28261932ddc Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 25 Mar 2024 20:06:19 +0100
-Subject: [PATCH] net: phy: qcom: at803x: fix kernel panic with at8031_probe
-
-On reworking and splitting the at803x driver, in splitting function of
-at803x PHYs it was added a NULL dereference bug where priv is referenced
-before it's actually allocated and then is tried to write to for the
-is_1000basex and is_fiber variables in the case of at8031, writing on
-the wrong address.
-
-Fix this by correctly setting priv local variable only after
-at803x_probe is called and actually allocates priv in the phydev struct.
-
-Reported-by: William Wortel <wwortel@dorpstraat.com>
-Cc: <stable@vger.kernel.org>
-Fixes: 25d2ba94005f ("net: phy: at803x: move specific at8031 probe mode check to dedicated probe")
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240325190621.2665-1-ansuelsmth@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/phy/qcom/at803x.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/qcom/at803x.c
-+++ b/drivers/net/phy/qcom/at803x.c
-@@ -797,7 +797,7 @@ static int at8031_parse_dt(struct phy_de
- 
- static int at8031_probe(struct phy_device *phydev)
- {
--	struct at803x_priv *priv = phydev->priv;
-+	struct at803x_priv *priv;
- 	int mode_cfg;
- 	int ccr;
- 	int ret;
-@@ -806,6 +806,8 @@ static int at8031_probe(struct phy_devic
- 	if (ret)
- 		return ret;
- 
-+	priv = phydev->priv;
-+
- 	/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
- 	 * options.
- 	 */
diff --git a/target/linux/generic/backport-6.1/720-v6.9-net-mdio-ipq4019-add-support-for-clock-frequency-pro.patch b/target/linux/generic/backport-6.1/720-v6.9-net-mdio-ipq4019-add-support-for-clock-frequency-pro.patch
deleted file mode 100644
index e6a240dbdae9..000000000000
--- a/target/linux/generic/backport-6.1/720-v6.9-net-mdio-ipq4019-add-support-for-clock-frequency-pro.patch
+++ /dev/null
@@ -1,205 +0,0 @@
-From bdce82e960d1205d118662f575cec39379984e34 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 31 Jan 2024 03:26:04 +0100
-Subject: [PATCH] net: mdio: ipq4019: add support for clock-frequency property
-
-The IPQ4019 MDIO internally divide the clock feed by AHB based on the
-MDIO_MODE reg. On reset or power up, the default value for the
-divider is 0xff that reflect the divider set to /256.
-
-This makes the MDC run at a very low rate, that is, considering AHB is
-always fixed to 100Mhz, a value of 390KHz.
-
-This hasn't have been a problem as MDIO wasn't used for time sensitive
-operation, it is now that on IPQ807x is usually mounted with PHY that
-requires MDIO to load their firmware (example Aquantia PHY).
-
-To handle this problem and permit to set the correct designed MDC
-frequency for the SoC add support for the standard "clock-frequency"
-property for the MDIO node.
-
-The divider supports value from /1 to /256 and the common value are to
-set it to /16 to reflect 6.25Mhz or to /8 on newer platform to reflect
-12.5Mhz.
-
-To scan if the requested rate is supported by the divider, loop with
-each supported divider and stop when the requested rate match the final
-rate with the current divider. An error is returned if the rate doesn't
-match any value.
-
-On MDIO reset, the divider is restored to the requested value to prevent
-any kind of downclocking caused by the divider reverting to a default
-value.
-
-To follow 802.3 spec of 2.5MHz of default value, if divider is set at
-/256 and "clock-frequency" is not set in DT, assume nobody set the
-divider and try to find the closest MDC rate to 2.5MHz. (in the case of
-AHB set to 100MHz, it's 1.5625MHz)
-
-While at is also document other bits of the MDIO_MODE reg to have a
-clear idea of what is actually applied there.
-
-Documentation of some BITs is skipped as they are marked as reserved and
-their usage is not clear (RES 11:9 GENPHY 16:13 RES1 19:17)
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/mdio/mdio-ipq4019.c | 109 ++++++++++++++++++++++++++++++--
- 1 file changed, 103 insertions(+), 6 deletions(-)
-
---- a/drivers/net/mdio/mdio-ipq4019.c
-+++ b/drivers/net/mdio/mdio-ipq4019.c
-@@ -14,6 +14,20 @@
- #include <linux/clk.h>
- 
- #define MDIO_MODE_REG				0x40
-+#define   MDIO_MODE_MDC_MODE			BIT(12)
-+/* 0 = Clause 22, 1 = Clause 45 */
-+#define   MDIO_MODE_C45				BIT(8)
-+#define   MDIO_MODE_DIV_MASK			GENMASK(7, 0)
-+#define     MDIO_MODE_DIV(x)			FIELD_PREP(MDIO_MODE_DIV_MASK, (x) - 1)
-+#define     MDIO_MODE_DIV_1			0x0
-+#define     MDIO_MODE_DIV_2			0x1
-+#define     MDIO_MODE_DIV_4			0x3
-+#define     MDIO_MODE_DIV_8			0x7
-+#define     MDIO_MODE_DIV_16			0xf
-+#define     MDIO_MODE_DIV_32			0x1f
-+#define     MDIO_MODE_DIV_64			0x3f
-+#define     MDIO_MODE_DIV_128			0x7f
-+#define     MDIO_MODE_DIV_256			0xff
- #define MDIO_ADDR_REG				0x44
- #define MDIO_DATA_WRITE_REG			0x48
- #define MDIO_DATA_READ_REG			0x4c
-@@ -26,9 +40,6 @@
- #define MDIO_CMD_ACCESS_CODE_C45_WRITE	1
- #define MDIO_CMD_ACCESS_CODE_C45_READ	2
- 
--/* 0 = Clause 22, 1 = Clause 45 */
--#define MDIO_MODE_C45				BIT(8)
--
- #define IPQ4019_MDIO_TIMEOUT	10000
- #define IPQ4019_MDIO_SLEEP		10
- 
-@@ -41,6 +52,7 @@ struct ipq4019_mdio_data {
- 	void __iomem	*membase;
- 	void __iomem *eth_ldo_rdy;
- 	struct clk *mdio_clk;
-+	unsigned int mdc_rate;
- };
- 
- static int ipq4019_mdio_wait_busy(struct mii_bus *bus)
-@@ -179,6 +191,38 @@ static int ipq4019_mdio_write(struct mii
- 	return 0;
- }
- 
-+static int ipq4019_mdio_set_div(struct ipq4019_mdio_data *priv)
-+{
-+	unsigned long ahb_rate;
-+	int div;
-+	u32 val;
-+
-+	/* If we don't have a clock for AHB use the fixed value */
-+	ahb_rate = IPQ_MDIO_CLK_RATE;
-+	if (priv->mdio_clk)
-+		ahb_rate = clk_get_rate(priv->mdio_clk);
-+
-+	/* MDC rate is ahb_rate/(MDIO_MODE_DIV + 1)
-+	 * While supported, internal documentation doesn't
-+	 * assure correct functionality of the MDIO bus
-+	 * with divider of 1, 2 or 4.
-+	 */
-+	for (div = 8; div <= 256; div *= 2) {
-+		/* The requested rate is supported by the div */
-+		if (priv->mdc_rate == DIV_ROUND_UP(ahb_rate, div)) {
-+			val = readl(priv->membase + MDIO_MODE_REG);
-+			val &= ~MDIO_MODE_DIV_MASK;
-+			val |= MDIO_MODE_DIV(div);
-+			writel(val, priv->membase + MDIO_MODE_REG);
-+
-+			return 0;
-+		}
-+	}
-+
-+	/* The requested rate is not supported */
-+	return -EINVAL;
-+}
-+
- static int ipq_mdio_reset(struct mii_bus *bus)
- {
- 	struct ipq4019_mdio_data *priv = bus->priv;
-@@ -201,10 +245,58 @@ static int ipq_mdio_reset(struct mii_bus
- 		return ret;
- 
- 	ret = clk_prepare_enable(priv->mdio_clk);
--	if (ret == 0)
--		mdelay(10);
-+	if (ret)
-+		return ret;
-+
-+	mdelay(10);
- 
--	return ret;
-+	/* Restore MDC rate */
-+	return ipq4019_mdio_set_div(priv);
-+}
-+
-+static void ipq4019_mdio_select_mdc_rate(struct platform_device *pdev,
-+					 struct ipq4019_mdio_data *priv)
-+{
-+	unsigned long ahb_rate;
-+	int div;
-+	u32 val;
-+
-+	/* MDC rate defined in DT, we don't have to decide a default value */
-+	if (!of_property_read_u32(pdev->dev.of_node, "clock-frequency",
-+				  &priv->mdc_rate))
-+		return;
-+
-+	/* If we don't have a clock for AHB use the fixed value */
-+	ahb_rate = IPQ_MDIO_CLK_RATE;
-+	if (priv->mdio_clk)
-+		ahb_rate = clk_get_rate(priv->mdio_clk);
-+
-+	/* Check what is the current div set */
-+	val = readl(priv->membase + MDIO_MODE_REG);
-+	div = FIELD_GET(MDIO_MODE_DIV_MASK, val);
-+
-+	/* div is not set to the default value of /256
-+	 * Probably someone changed that (bootloader, other drivers)
-+	 * Keep this and don't overwrite it.
-+	 */
-+	if (div != MDIO_MODE_DIV_256) {
-+		priv->mdc_rate = DIV_ROUND_UP(ahb_rate, div + 1);
-+		return;
-+	}
-+
-+	/* If div is /256 assume nobody have set this value and
-+	 * try to find one MDC rate that is close the 802.3 spec of
-+	 * 2.5MHz
-+	 */
-+	for (div = 256; div >= 8; div /= 2) {
-+		/* Stop as soon as we found a divider that
-+		 * reached the closest value to 2.5MHz
-+		 */
-+		if (DIV_ROUND_UP(ahb_rate, div) > 2500000)
-+			break;
-+
-+		priv->mdc_rate = DIV_ROUND_UP(ahb_rate, div);
-+	}
- }
- 
- static int ipq4019_mdio_probe(struct platform_device *pdev)
-@@ -228,6 +320,11 @@ static int ipq4019_mdio_probe(struct pla
- 	if (IS_ERR(priv->mdio_clk))
- 		return PTR_ERR(priv->mdio_clk);
- 
-+	ipq4019_mdio_select_mdc_rate(pdev, priv);
-+	ret = ipq4019_mdio_set_div(priv);
-+	if (ret)
-+		return ret;
-+
- 	/* The platform resource is provided on the chipset IPQ5018 */
- 	/* This resource is optional */
- 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
diff --git a/target/linux/generic/backport-6.1/721-v6.7-net-phy-aquantia-drop-wrong-endianness-conversion-fo.patch b/target/linux/generic/backport-6.1/721-v6.7-net-phy-aquantia-drop-wrong-endianness-conversion-fo.patch
deleted file mode 100644
index d32a7edf93cd..000000000000
--- a/target/linux/generic/backport-6.1/721-v6.7-net-phy-aquantia-drop-wrong-endianness-conversion-fo.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 7edce370d87a23e8ed46af5b76a9fef1e341b67b Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 28 Nov 2023 14:59:28 +0100
-Subject: [PATCH] net: phy: aquantia: drop wrong endianness conversion for addr
- and CRC
-
-On further testing on BE target with kernel test robot, it was notice
-that the endianness conversion for addr and CRC in fw_load_memory was
-wrong.
-
-Drop the cpu_to_le32 conversion for addr load as it's not needed.
-
-Use get_unaligned_le32 instead of get_unaligned for FW data word load to
-correctly convert data in the correct order to follow system endian.
-
-Also drop the cpu_to_be32 for CRC calculation as it's wrong and would
-cause different CRC on BE system.
-The loaded word is swapped internally and MAILBOX calculates the CRC on
-the swapped word. To correctly calculate the CRC to be later matched
-with the one from MAILBOX, use an u8 struct and swap the word there to
-keep the same order on both LE and BE for crc_ccitt_false function.
-Also add additional comments on how the CRC verification for the loaded
-section works.
-
-CRC is calculated as we load the section and verified with the MAILBOX
-only after the entire section is loaded to skip additional slowdown by
-loop the section data again.
-
-Reported-by: kernel test robot <lkp@intel.com>
-Closes: https://lore.kernel.org/oe-kbuild-all/202311210414.sEJZjlcD-lkp@intel.com/
-Fixes: e93984ebc1c8 ("net: phy: aquantia: add firmware load support")
-Tested-by: Robert Marko <robimarko@gmail.com> # ipq8072 LE device
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Link: https://lore.kernel.org/r/20231128135928.9841-1-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/aquantia/aquantia_firmware.c | 24 ++++++++++++--------
- 1 file changed, 14 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/aquantia/aquantia_firmware.c
-+++ b/drivers/net/phy/aquantia/aquantia_firmware.c
-@@ -93,9 +93,6 @@ static int aqr_fw_load_memory(struct phy
- 	u16 crc = 0, up_crc;
- 	size_t pos;
- 
--	/* PHY expect addr in LE */
--	addr = (__force u32)cpu_to_le32(addr);
--
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1,
- 		      VEND1_GLOBAL_MAILBOX_INTERFACE1,
- 		      VEND1_GLOBAL_MAILBOX_INTERFACE1_CRC_RESET);
-@@ -110,10 +107,11 @@ static int aqr_fw_load_memory(struct phy
- 	 * If a firmware that is not word aligned is found, please report upstream.
- 	 */
- 	for (pos = 0; pos < len; pos += sizeof(u32)) {
-+		u8 crc_data[4];
- 		u32 word;
- 
- 		/* FW data is always stored in little-endian */
--		word = get_unaligned((const u32 *)(data + pos));
-+		word = get_unaligned_le32((const u32 *)(data + pos));
- 
- 		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE5,
- 			      VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA(word));
-@@ -124,15 +122,21 @@ static int aqr_fw_load_memory(struct phy
- 			      VEND1_GLOBAL_MAILBOX_INTERFACE1_EXECUTE |
- 			      VEND1_GLOBAL_MAILBOX_INTERFACE1_WRITE);
- 
--		/* calculate CRC as we load data to the mailbox.
--		 * We convert word to big-endian as PHY is BE and mailbox will
--		 * return a BE CRC.
-+		/* Word is swapped internally and MAILBOX CRC is calculated
-+		 * using big-endian order. Mimic what the PHY does to have a
-+		 * matching CRC...
- 		 */
--		word = (__force u32)cpu_to_be32(word);
--		crc = crc_ccitt_false(crc, (u8 *)&word, sizeof(word));
--	}
-+		crc_data[0] = word >> 24;
-+		crc_data[1] = word >> 16;
-+		crc_data[2] = word >> 8;
-+		crc_data[3] = word;
- 
-+		/* ...calculate CRC as we load data... */
-+		crc = crc_ccitt_false(crc, crc_data, sizeof(crc_data));
-+	}
-+	/* ...gets CRC from MAILBOX after we have loaded the entire section... */
- 	up_crc = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE2);
-+	/* ...and make sure it does match our calculated CRC */
- 	if (crc != up_crc) {
- 		phydev_err(phydev, "CRC mismatch: calculated 0x%04x PHY 0x%04x\n",
- 			   crc, up_crc);
diff --git a/target/linux/generic/backport-6.1/724-v6.2-net-ethernet-mtk_eth_soc-enable-flow-offloading-supp.patch b/target/linux/generic/backport-6.1/724-v6.2-net-ethernet-mtk_eth_soc-enable-flow-offloading-supp.patch
deleted file mode 100644
index cf0d2a3a8920..000000000000
--- a/target/linux/generic/backport-6.1/724-v6.2-net-ethernet-mtk_eth_soc-enable-flow-offloading-supp.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 1b9827ceab08450308f7971d6fd700ec88b6ce67 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 3 Dec 2022 14:20:37 +0100
-Subject: [PATCH 098/250] net: mtk_eth_soc: enable flow offload support for
- MT7986 SoC
-
-Since Wireless Ethernet Dispatcher is now available for mt7986 in mt76,
-enable hw flow support for MT7986 SoC.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Link: https://lore.kernel.org/r/fdcaacd827938e6a8c4aa1ac2c13e46d2c08c821.1670072898.git.lorenzo@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4332,6 +4332,7 @@ static const struct mtk_soc_data mt7986_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7986_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.offload_version = 2,
- 	.hash_offset = 4,
- 	.foe_entry_size = sizeof(struct mtk_foe_entry),
- 	.txrx = {
diff --git a/target/linux/generic/backport-6.1/729-01-v6.1-net-ethernet-mtk_wed-introduce-wed-mcu-support.patch b/target/linux/generic/backport-6.1/729-01-v6.1-net-ethernet-mtk_wed-introduce-wed-mcu-support.patch
deleted file mode 100644
index c48613929d12..000000000000
--- a/target/linux/generic/backport-6.1/729-01-v6.1-net-ethernet-mtk_wed-introduce-wed-mcu-support.patch
+++ /dev/null
@@ -1,591 +0,0 @@
-From: Sujuan Chen <sujuan.chen@mediatek.com>
-Date: Sat, 5 Nov 2022 23:36:18 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: introduce wed mcu support
-
-Introduce WED mcu support used to configure WED WO chip.
-This is a preliminary patch in order to add RX Wireless
-Ethernet Dispatch available on MT7986 SoC.
-
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- create mode 100644 drivers/net/ethernet/mediatek/mtk_wed_mcu.c
- create mode 100644 drivers/net/ethernet/mediatek/mtk_wed_wo.h
-
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -5,7 +5,7 @@
- 
- obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
- mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o mtk_ppe_offload.o
--mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed.o
-+mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed.o mtk_wed_mcu.o
- ifdef CONFIG_DEBUG_FS
- mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed_debugfs.o
- endif
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -0,0 +1,359 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2022 MediaTek Inc.
-+ *
-+ * Author: Lorenzo Bianconi <lorenzo@kernel.org>
-+ *	   Sujuan Chen <sujuan.chen@mediatek.com>
-+ */
-+
-+#include <linux/firmware.h>
-+#include <linux/of_address.h>
-+#include <linux/of_reserved_mem.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/soc/mediatek/mtk_wed.h>
-+
-+#include "mtk_wed_regs.h"
-+#include "mtk_wed_wo.h"
-+#include "mtk_wed.h"
-+
-+static u32 wo_r32(struct mtk_wed_wo *wo, u32 reg)
-+{
-+	return readl(wo->boot.addr + reg);
-+}
-+
-+static void wo_w32(struct mtk_wed_wo *wo, u32 reg, u32 val)
-+{
-+	writel(val, wo->boot.addr + reg);
-+}
-+
-+static struct sk_buff *
-+mtk_wed_mcu_msg_alloc(const void *data, int data_len)
-+{
-+	int length = sizeof(struct mtk_wed_mcu_hdr) + data_len;
-+	struct sk_buff *skb;
-+
-+	skb = alloc_skb(length, GFP_KERNEL);
-+	if (!skb)
-+		return NULL;
-+
-+	memset(skb->head, 0, length);
-+	skb_reserve(skb, sizeof(struct mtk_wed_mcu_hdr));
-+	if (data && data_len)
-+		skb_put_data(skb, data, data_len);
-+
-+	return skb;
-+}
-+
-+static struct sk_buff *
-+mtk_wed_mcu_get_response(struct mtk_wed_wo *wo, unsigned long expires)
-+{
-+	if (!time_is_after_jiffies(expires))
-+		return NULL;
-+
-+	wait_event_timeout(wo->mcu.wait, !skb_queue_empty(&wo->mcu.res_q),
-+			   expires - jiffies);
-+	return skb_dequeue(&wo->mcu.res_q);
-+}
-+
-+void mtk_wed_mcu_rx_event(struct mtk_wed_wo *wo, struct sk_buff *skb)
-+{
-+	skb_queue_tail(&wo->mcu.res_q, skb);
-+	wake_up(&wo->mcu.wait);
-+}
-+
-+void mtk_wed_mcu_rx_unsolicited_event(struct mtk_wed_wo *wo,
-+				      struct sk_buff *skb)
-+{
-+	struct mtk_wed_mcu_hdr *hdr = (struct mtk_wed_mcu_hdr *)skb->data;
-+
-+	switch (hdr->cmd) {
-+	case MTK_WED_WO_EVT_LOG_DUMP: {
-+		const char *msg = (const char *)(skb->data + sizeof(*hdr));
-+
-+		dev_notice(wo->hw->dev, "%s\n", msg);
-+		break;
-+	}
-+	case MTK_WED_WO_EVT_PROFILING: {
-+		struct mtk_wed_wo_log_info *info;
-+		u32 count = (skb->len - sizeof(*hdr)) / sizeof(*info);
-+		int i;
-+
-+		info = (struct mtk_wed_wo_log_info *)(skb->data + sizeof(*hdr));
-+		for (i = 0 ; i < count ; i++)
-+			dev_notice(wo->hw->dev,
-+				   "SN:%u latency: total=%u, rro:%u, mod:%u\n",
-+				   le32_to_cpu(info[i].sn),
-+				   le32_to_cpu(info[i].total),
-+				   le32_to_cpu(info[i].rro),
-+				   le32_to_cpu(info[i].mod));
-+		break;
-+	}
-+	case MTK_WED_WO_EVT_RXCNT_INFO:
-+		break;
-+	default:
-+		break;
-+	}
-+
-+	dev_kfree_skb(skb);
-+}
-+
-+static int
-+mtk_wed_mcu_skb_send_msg(struct mtk_wed_wo *wo, struct sk_buff *skb,
-+			 int id, int cmd, u16 *wait_seq, bool wait_resp)
-+{
-+	struct mtk_wed_mcu_hdr *hdr;
-+
-+	/* TODO: make it dynamic based on cmd */
-+	wo->mcu.timeout = 20 * HZ;
-+
-+	hdr = (struct mtk_wed_mcu_hdr *)skb_push(skb, sizeof(*hdr));
-+	hdr->cmd = cmd;
-+	hdr->length = cpu_to_le16(skb->len);
-+
-+	if (wait_resp && wait_seq) {
-+		u16 seq = ++wo->mcu.seq;
-+
-+		if (!seq)
-+			seq = ++wo->mcu.seq;
-+		*wait_seq = seq;
-+
-+		hdr->flag |= cpu_to_le16(MTK_WED_WARP_CMD_FLAG_NEED_RSP);
-+		hdr->seq = cpu_to_le16(seq);
-+	}
-+	if (id == MTK_WED_MODULE_ID_WO)
-+		hdr->flag |= cpu_to_le16(MTK_WED_WARP_CMD_FLAG_FROM_TO_WO);
-+
-+	dev_kfree_skb(skb);
-+	return 0;
-+}
-+
-+static int
-+mtk_wed_mcu_parse_response(struct mtk_wed_wo *wo, struct sk_buff *skb,
-+			   int cmd, int seq)
-+{
-+	struct mtk_wed_mcu_hdr *hdr;
-+
-+	if (!skb) {
-+		dev_err(wo->hw->dev, "Message %08x (seq %d) timeout\n",
-+			cmd, seq);
-+		return -ETIMEDOUT;
-+	}
-+
-+	hdr = (struct mtk_wed_mcu_hdr *)skb->data;
-+	if (le16_to_cpu(hdr->seq) != seq)
-+		return -EAGAIN;
-+
-+	skb_pull(skb, sizeof(*hdr));
-+	switch (cmd) {
-+	case MTK_WED_WO_CMD_RXCNT_INFO:
-+	default:
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
-+int mtk_wed_mcu_send_msg(struct mtk_wed_wo *wo, int id, int cmd,
-+			 const void *data, int len, bool wait_resp)
-+{
-+	unsigned long expires;
-+	struct sk_buff *skb;
-+	u16 seq;
-+	int ret;
-+
-+	skb = mtk_wed_mcu_msg_alloc(data, len);
-+	if (!skb)
-+		return -ENOMEM;
-+
-+	mutex_lock(&wo->mcu.mutex);
-+
-+	ret = mtk_wed_mcu_skb_send_msg(wo, skb, id, cmd, &seq, wait_resp);
-+	if (ret || !wait_resp)
-+		goto unlock;
-+
-+	expires = jiffies + wo->mcu.timeout;
-+	do {
-+		skb = mtk_wed_mcu_get_response(wo, expires);
-+		ret = mtk_wed_mcu_parse_response(wo, skb, cmd, seq);
-+		dev_kfree_skb(skb);
-+	} while (ret == -EAGAIN);
-+
-+unlock:
-+	mutex_unlock(&wo->mcu.mutex);
-+
-+	return ret;
-+}
-+
-+static int
-+mtk_wed_get_memory_region(struct mtk_wed_wo *wo,
-+			  struct mtk_wed_wo_memory_region *region)
-+{
-+	struct reserved_mem *rmem;
-+	struct device_node *np;
-+	int index;
-+
-+	index = of_property_match_string(wo->hw->node, "memory-region-names",
-+					 region->name);
-+	if (index < 0)
-+		return index;
-+
-+	np = of_parse_phandle(wo->hw->node, "memory-region", index);
-+	if (!np)
-+		return -ENODEV;
-+
-+	rmem = of_reserved_mem_lookup(np);
-+	of_node_put(np);
-+
-+	if (!rmem)
-+		return -ENODEV;
-+
-+	region->phy_addr = rmem->base;
-+	region->size = rmem->size;
-+	region->addr = devm_ioremap(wo->hw->dev, region->phy_addr, region->size);
-+
-+	return !region->addr ? -EINVAL : 0;
-+}
-+
-+static int
-+mtk_wed_mcu_run_firmware(struct mtk_wed_wo *wo, const struct firmware *fw,
-+			 struct mtk_wed_wo_memory_region *region)
-+{
-+	const u8 *first_region_ptr, *region_ptr, *trailer_ptr, *ptr = fw->data;
-+	const struct mtk_wed_fw_trailer *trailer;
-+	const struct mtk_wed_fw_region *fw_region;
-+
-+	trailer_ptr = fw->data + fw->size - sizeof(*trailer);
-+	trailer = (const struct mtk_wed_fw_trailer *)trailer_ptr;
-+	region_ptr = trailer_ptr - trailer->num_region * sizeof(*fw_region);
-+	first_region_ptr = region_ptr;
-+
-+	while (region_ptr < trailer_ptr) {
-+		u32 length;
-+
-+		fw_region = (const struct mtk_wed_fw_region *)region_ptr;
-+		length = le32_to_cpu(fw_region->len);
-+
-+		if (region->phy_addr != le32_to_cpu(fw_region->addr))
-+			goto next;
-+
-+		if (region->size < length)
-+			goto next;
-+
-+		if (first_region_ptr < ptr + length)
-+			goto next;
-+
-+		if (region->shared && region->consumed)
-+			return 0;
-+
-+		if (!region->shared || !region->consumed) {
-+			memcpy_toio(region->addr, ptr, length);
-+			region->consumed = true;
-+			return 0;
-+		}
-+next:
-+		region_ptr += sizeof(*fw_region);
-+		ptr += length;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static int
-+mtk_wed_mcu_load_firmware(struct mtk_wed_wo *wo)
-+{
-+	static struct mtk_wed_wo_memory_region mem_region[] = {
-+		[MTK_WED_WO_REGION_EMI] = {
-+			.name = "wo-emi",
-+		},
-+		[MTK_WED_WO_REGION_ILM] = {
-+			.name = "wo-ilm",
-+		},
-+		[MTK_WED_WO_REGION_DATA] = {
-+			.name = "wo-data",
-+			.shared = true,
-+		},
-+	};
-+	const struct mtk_wed_fw_trailer *trailer;
-+	const struct firmware *fw;
-+	const char *fw_name;
-+	u32 val, boot_cr;
-+	int ret, i;
-+
-+	/* load firmware region metadata */
-+	for (i = 0; i < ARRAY_SIZE(mem_region); i++) {
-+		ret = mtk_wed_get_memory_region(wo, &mem_region[i]);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	wo->boot.name = "wo-boot";
-+	ret = mtk_wed_get_memory_region(wo, &wo->boot);
-+	if (ret)
-+		return ret;
-+
-+	/* set dummy cr */
-+	wed_w32(wo->hw->wed_dev, MTK_WED_SCR0 + 4 * MTK_WED_DUMMY_CR_FWDL,
-+		wo->hw->index + 1);
-+
-+	/* load firmware */
-+	fw_name = wo->hw->index ? MT7986_FIRMWARE_WO1 : MT7986_FIRMWARE_WO0;
-+	ret = request_firmware(&fw, fw_name, wo->hw->dev);
-+	if (ret)
-+		return ret;
-+
-+	trailer = (void *)(fw->data + fw->size -
-+			   sizeof(struct mtk_wed_fw_trailer));
-+	dev_info(wo->hw->dev,
-+		 "MTK WED WO Firmware Version: %.10s, Build Time: %.15s\n",
-+		 trailer->fw_ver, trailer->build_date);
-+	dev_info(wo->hw->dev, "MTK WED WO Chip ID %02x Region %d\n",
-+		 trailer->chip_id, trailer->num_region);
-+
-+	for (i = 0; i < ARRAY_SIZE(mem_region); i++) {
-+		ret = mtk_wed_mcu_run_firmware(wo, fw, &mem_region[i]);
-+		if (ret)
-+			goto out;
-+	}
-+
-+	/* set the start address */
-+	boot_cr = wo->hw->index ? MTK_WO_MCU_CFG_LS_WA_BOOT_ADDR_ADDR
-+				: MTK_WO_MCU_CFG_LS_WM_BOOT_ADDR_ADDR;
-+	wo_w32(wo, boot_cr, mem_region[MTK_WED_WO_REGION_EMI].phy_addr >> 16);
-+	/* wo firmware reset */
-+	wo_w32(wo, MTK_WO_MCU_CFG_LS_WF_MCCR_CLR_ADDR, 0xc00);
-+
-+	val = wo_r32(wo, MTK_WO_MCU_CFG_LS_WF_MCU_CFG_WM_WA_ADDR);
-+	val |= wo->hw->index ? MTK_WO_MCU_CFG_LS_WF_WM_WA_WA_CPU_RSTB_MASK
-+			     : MTK_WO_MCU_CFG_LS_WF_WM_WA_WM_CPU_RSTB_MASK;
-+	wo_w32(wo, MTK_WO_MCU_CFG_LS_WF_MCU_CFG_WM_WA_ADDR, val);
-+out:
-+	release_firmware(fw);
-+
-+	return ret;
-+}
-+
-+static u32
-+mtk_wed_mcu_read_fw_dl(struct mtk_wed_wo *wo)
-+{
-+	return wed_r32(wo->hw->wed_dev,
-+		       MTK_WED_SCR0 + 4 * MTK_WED_DUMMY_CR_FWDL);
-+}
-+
-+int mtk_wed_mcu_init(struct mtk_wed_wo *wo)
-+{
-+	u32 val;
-+	int ret;
-+
-+	skb_queue_head_init(&wo->mcu.res_q);
-+	init_waitqueue_head(&wo->mcu.wait);
-+	mutex_init(&wo->mcu.mutex);
-+
-+	ret = mtk_wed_mcu_load_firmware(wo);
-+	if (ret)
-+		return ret;
-+
-+	return readx_poll_timeout(mtk_wed_mcu_read_fw_dl, wo, val, !val,
-+				  100, MTK_FW_DL_TIMEOUT);
-+}
-+
-+MODULE_FIRMWARE(MT7986_FIRMWARE_WO0);
-+MODULE_FIRMWARE(MT7986_FIRMWARE_WO1);
---- a/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -152,6 +152,7 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_RING_RX(_n)				(0x400 + (_n) * 0x10)
- 
-+#define MTK_WED_SCR0					0x3c0
- #define MTK_WED_WPDMA_INT_TRIGGER			0x504
- #define MTK_WED_WPDMA_INT_TRIGGER_RX_DONE		BIT(1)
- #define MTK_WED_WPDMA_INT_TRIGGER_TX_DONE		GENMASK(5, 4)
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-@@ -0,0 +1,150 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+/* Copyright (C) 2022 Lorenzo Bianconi <lorenzo@kernel.org>  */
-+
-+#ifndef __MTK_WED_WO_H
-+#define __MTK_WED_WO_H
-+
-+#include <linux/skbuff.h>
-+#include <linux/netdevice.h>
-+
-+struct mtk_wed_hw;
-+
-+struct mtk_wed_mcu_hdr {
-+	/* DW0 */
-+	u8 version;
-+	u8 cmd;
-+	__le16 length;
-+
-+	/* DW1 */
-+	__le16 seq;
-+	__le16 flag;
-+
-+	/* DW2 */
-+	__le32 status;
-+
-+	/* DW3 */
-+	u8 rsv[20];
-+};
-+
-+struct mtk_wed_wo_log_info {
-+	__le32 sn;
-+	__le32 total;
-+	__le32 rro;
-+	__le32 mod;
-+};
-+
-+enum mtk_wed_wo_event {
-+	MTK_WED_WO_EVT_LOG_DUMP		= 0x1,
-+	MTK_WED_WO_EVT_PROFILING	= 0x2,
-+	MTK_WED_WO_EVT_RXCNT_INFO	= 0x3,
-+};
-+
-+#define MTK_WED_MODULE_ID_WO		1
-+#define MTK_FW_DL_TIMEOUT		4000000 /* us */
-+#define MTK_WOCPU_TIMEOUT		2000000 /* us */
-+
-+enum {
-+	MTK_WED_WARP_CMD_FLAG_RSP		= BIT(0),
-+	MTK_WED_WARP_CMD_FLAG_NEED_RSP		= BIT(1),
-+	MTK_WED_WARP_CMD_FLAG_FROM_TO_WO	= BIT(2),
-+};
-+
-+enum {
-+	MTK_WED_WO_REGION_EMI,
-+	MTK_WED_WO_REGION_ILM,
-+	MTK_WED_WO_REGION_DATA,
-+	MTK_WED_WO_REGION_BOOT,
-+	__MTK_WED_WO_REGION_MAX,
-+};
-+
-+enum mtk_wed_dummy_cr_idx {
-+	MTK_WED_DUMMY_CR_FWDL,
-+	MTK_WED_DUMMY_CR_WO_STATUS,
-+};
-+
-+#define MT7986_FIRMWARE_WO0	"mediatek/mt7986_wo_0.bin"
-+#define MT7986_FIRMWARE_WO1	"mediatek/mt7986_wo_1.bin"
-+
-+#define MTK_WO_MCU_CFG_LS_BASE				0
-+#define MTK_WO_MCU_CFG_LS_HW_VER_ADDR			(MTK_WO_MCU_CFG_LS_BASE + 0x000)
-+#define MTK_WO_MCU_CFG_LS_FW_VER_ADDR			(MTK_WO_MCU_CFG_LS_BASE + 0x004)
-+#define MTK_WO_MCU_CFG_LS_CFG_DBG1_ADDR			(MTK_WO_MCU_CFG_LS_BASE + 0x00c)
-+#define MTK_WO_MCU_CFG_LS_CFG_DBG2_ADDR			(MTK_WO_MCU_CFG_LS_BASE + 0x010)
-+#define MTK_WO_MCU_CFG_LS_WF_MCCR_ADDR			(MTK_WO_MCU_CFG_LS_BASE + 0x014)
-+#define MTK_WO_MCU_CFG_LS_WF_MCCR_SET_ADDR		(MTK_WO_MCU_CFG_LS_BASE + 0x018)
-+#define MTK_WO_MCU_CFG_LS_WF_MCCR_CLR_ADDR		(MTK_WO_MCU_CFG_LS_BASE + 0x01c)
-+#define MTK_WO_MCU_CFG_LS_WF_MCU_CFG_WM_WA_ADDR		(MTK_WO_MCU_CFG_LS_BASE + 0x050)
-+#define MTK_WO_MCU_CFG_LS_WM_BOOT_ADDR_ADDR		(MTK_WO_MCU_CFG_LS_BASE + 0x060)
-+#define MTK_WO_MCU_CFG_LS_WA_BOOT_ADDR_ADDR		(MTK_WO_MCU_CFG_LS_BASE + 0x064)
-+
-+#define MTK_WO_MCU_CFG_LS_WF_WM_WA_WM_CPU_RSTB_MASK	BIT(5)
-+#define MTK_WO_MCU_CFG_LS_WF_WM_WA_WA_CPU_RSTB_MASK	BIT(0)
-+
-+struct mtk_wed_wo_memory_region {
-+	const char *name;
-+	void __iomem *addr;
-+	phys_addr_t phy_addr;
-+	u32 size;
-+	bool shared:1;
-+	bool consumed:1;
-+};
-+
-+struct mtk_wed_fw_region {
-+	__le32 decomp_crc;
-+	__le32 decomp_len;
-+	__le32 decomp_blk_sz;
-+	u8 rsv0[4];
-+	__le32 addr;
-+	__le32 len;
-+	u8 feature_set;
-+	u8 rsv1[15];
-+} __packed;
-+
-+struct mtk_wed_fw_trailer {
-+	u8 chip_id;
-+	u8 eco_code;
-+	u8 num_region;
-+	u8 format_ver;
-+	u8 format_flag;
-+	u8 rsv[2];
-+	char fw_ver[10];
-+	char build_date[15];
-+	u32 crc;
-+};
-+
-+struct mtk_wed_wo {
-+	struct mtk_wed_hw *hw;
-+	struct mtk_wed_wo_memory_region boot;
-+
-+	struct {
-+		struct mutex mutex;
-+		int timeout;
-+		u16 seq;
-+
-+		struct sk_buff_head res_q;
-+		wait_queue_head_t wait;
-+	} mcu;
-+};
-+
-+static inline int
-+mtk_wed_mcu_check_msg(struct mtk_wed_wo *wo, struct sk_buff *skb)
-+{
-+	struct mtk_wed_mcu_hdr *hdr = (struct mtk_wed_mcu_hdr *)skb->data;
-+
-+	if (hdr->version)
-+		return -EINVAL;
-+
-+	if (skb->len < sizeof(*hdr) || skb->len != le16_to_cpu(hdr->length))
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+void mtk_wed_mcu_rx_event(struct mtk_wed_wo *wo, struct sk_buff *skb);
-+void mtk_wed_mcu_rx_unsolicited_event(struct mtk_wed_wo *wo,
-+				      struct sk_buff *skb);
-+int mtk_wed_mcu_send_msg(struct mtk_wed_wo *wo, int id, int cmd,
-+			 const void *data, int len, bool wait_resp);
-+int mtk_wed_mcu_init(struct mtk_wed_wo *wo);
-+
-+#endif /* __MTK_WED_WO_H */
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -11,6 +11,35 @@
- struct mtk_wed_hw;
- struct mtk_wdma_desc;
- 
-+enum mtk_wed_wo_cmd {
-+	MTK_WED_WO_CMD_WED_CFG,
-+	MTK_WED_WO_CMD_WED_RX_STAT,
-+	MTK_WED_WO_CMD_RRO_SER,
-+	MTK_WED_WO_CMD_DBG_INFO,
-+	MTK_WED_WO_CMD_DEV_INFO,
-+	MTK_WED_WO_CMD_BSS_INFO,
-+	MTK_WED_WO_CMD_STA_REC,
-+	MTK_WED_WO_CMD_DEV_INFO_DUMP,
-+	MTK_WED_WO_CMD_BSS_INFO_DUMP,
-+	MTK_WED_WO_CMD_STA_REC_DUMP,
-+	MTK_WED_WO_CMD_BA_INFO_DUMP,
-+	MTK_WED_WO_CMD_FBCMD_Q_DUMP,
-+	MTK_WED_WO_CMD_FW_LOG_CTRL,
-+	MTK_WED_WO_CMD_LOG_FLUSH,
-+	MTK_WED_WO_CMD_CHANGE_STATE,
-+	MTK_WED_WO_CMD_CPU_STATS_ENABLE,
-+	MTK_WED_WO_CMD_CPU_STATS_DUMP,
-+	MTK_WED_WO_CMD_EXCEPTION_INIT,
-+	MTK_WED_WO_CMD_PROF_CTRL,
-+	MTK_WED_WO_CMD_STA_BA_DUMP,
-+	MTK_WED_WO_CMD_BA_CTRL_DUMP,
-+	MTK_WED_WO_CMD_RXCNT_CTRL,
-+	MTK_WED_WO_CMD_RXCNT_INFO,
-+	MTK_WED_WO_CMD_SET_CAP,
-+	MTK_WED_WO_CMD_CCIF_RING_DUMP,
-+	MTK_WED_WO_CMD_WED_END
-+};
-+
- enum mtk_wed_bus_tye {
- 	MTK_WED_BUS_PCIE,
- 	MTK_WED_BUS_AXI,
diff --git a/target/linux/generic/backport-6.1/729-02-v6.1-net-ethernet-mtk_wed-introduce-wed-wo-support.patch b/target/linux/generic/backport-6.1/729-02-v6.1-net-ethernet-mtk_wed-introduce-wed-wo-support.patch
deleted file mode 100644
index fd5f45df2aaa..000000000000
--- a/target/linux/generic/backport-6.1/729-02-v6.1-net-ethernet-mtk_wed-introduce-wed-wo-support.patch
+++ /dev/null
@@ -1,737 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 5 Nov 2022 23:36:19 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: introduce wed wo support
-
-Introduce WO chip support to mtk wed driver. MTK WED WO is used to
-implement RX Wireless Ethernet Dispatch and offload traffic received by
-wlan nic to the wired interface.
-
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- create mode 100644 drivers/net/ethernet/mediatek/mtk_wed_wo.c
-
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -5,7 +5,7 @@
- 
- obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
- mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o mtk_ppe_offload.o
--mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed.o mtk_wed_mcu.o
-+mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed.o mtk_wed_mcu.o mtk_wed_wo.o
- ifdef CONFIG_DEBUG_FS
- mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed_debugfs.o
- endif
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -16,6 +16,7 @@
- #include "mtk_wed_regs.h"
- #include "mtk_wed.h"
- #include "mtk_ppe.h"
-+#include "mtk_wed_wo.h"
- 
- #define MTK_PCIE_BASE(n)		(0x1a143000 + (n) * 0x2000)
- 
-@@ -355,6 +356,8 @@ mtk_wed_detach(struct mtk_wed_device *de
- 
- 	mtk_wed_free_buffer(dev);
- 	mtk_wed_free_tx_rings(dev);
-+	if (hw->version != 1)
-+		mtk_wed_wo_deinit(hw);
- 
- 	if (dev->wlan.bus_type == MTK_WED_BUS_PCIE) {
- 		struct device_node *wlan_node;
-@@ -878,9 +881,11 @@ mtk_wed_attach(struct mtk_wed_device *de
- 	}
- 
- 	mtk_wed_hw_init_early(dev);
--	if (hw->hifsys)
-+	if (hw->version == 1)
- 		regmap_update_bits(hw->hifsys, HIFSYS_DMA_AG_MAP,
- 				   BIT(hw->index), 0);
-+	else
-+		ret = mtk_wed_wo_init(hw);
- 
- out:
- 	mutex_unlock(&hw_lock);
---- a/drivers/net/ethernet/mediatek/mtk_wed.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.h
-@@ -10,6 +10,7 @@
- #include <linux/netdevice.h>
- 
- struct mtk_eth;
-+struct mtk_wed_wo;
- 
- struct mtk_wed_hw {
- 	struct device_node *node;
-@@ -22,6 +23,7 @@ struct mtk_wed_hw {
- 	struct regmap *mirror;
- 	struct dentry *debugfs_dir;
- 	struct mtk_wed_device *wed_dev;
-+	struct mtk_wed_wo *wed_wo;
- 	u32 debugfs_reg;
- 	u32 num_flows;
- 	u8 version;
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -122,8 +122,7 @@ mtk_wed_mcu_skb_send_msg(struct mtk_wed_
- 	if (id == MTK_WED_MODULE_ID_WO)
- 		hdr->flag |= cpu_to_le16(MTK_WED_WARP_CMD_FLAG_FROM_TO_WO);
- 
--	dev_kfree_skb(skb);
--	return 0;
-+	return mtk_wed_wo_queue_tx_skb(wo, &wo->q_tx, skb);
- }
- 
- static int
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.c
-@@ -0,0 +1,508 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/* Copyright (C) 2022 MediaTek Inc.
-+ *
-+ * Author: Lorenzo Bianconi <lorenzo@kernel.org>
-+ *	   Sujuan Chen <sujuan.chen@mediatek.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/of_platform.h>
-+#include <linux/interrupt.h>
-+#include <linux/of_address.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of_irq.h>
-+#include <linux/bitfield.h>
-+
-+#include "mtk_wed.h"
-+#include "mtk_wed_regs.h"
-+#include "mtk_wed_wo.h"
-+
-+static u32
-+mtk_wed_mmio_r32(struct mtk_wed_wo *wo, u32 reg)
-+{
-+	u32 val;
-+
-+	if (regmap_read(wo->mmio.regs, reg, &val))
-+		val = ~0;
-+
-+	return val;
-+}
-+
-+static void
-+mtk_wed_mmio_w32(struct mtk_wed_wo *wo, u32 reg, u32 val)
-+{
-+	regmap_write(wo->mmio.regs, reg, val);
-+}
-+
-+static u32
-+mtk_wed_wo_get_isr(struct mtk_wed_wo *wo)
-+{
-+	u32 val = mtk_wed_mmio_r32(wo, MTK_WED_WO_CCIF_RCHNUM);
-+
-+	return val & MTK_WED_WO_CCIF_RCHNUM_MASK;
-+}
-+
-+static void
-+mtk_wed_wo_set_isr(struct mtk_wed_wo *wo, u32 mask)
-+{
-+	mtk_wed_mmio_w32(wo, MTK_WED_WO_CCIF_IRQ0_MASK, mask);
-+}
-+
-+static void
-+mtk_wed_wo_set_ack(struct mtk_wed_wo *wo, u32 mask)
-+{
-+	mtk_wed_mmio_w32(wo, MTK_WED_WO_CCIF_ACK, mask);
-+}
-+
-+static void
-+mtk_wed_wo_set_isr_mask(struct mtk_wed_wo *wo, u32 mask, u32 val, bool set)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&wo->mmio.lock, flags);
-+	wo->mmio.irq_mask &= ~mask;
-+	wo->mmio.irq_mask |= val;
-+	if (set)
-+		mtk_wed_wo_set_isr(wo, wo->mmio.irq_mask);
-+	spin_unlock_irqrestore(&wo->mmio.lock, flags);
-+}
-+
-+static void
-+mtk_wed_wo_irq_enable(struct mtk_wed_wo *wo, u32 mask)
-+{
-+	mtk_wed_wo_set_isr_mask(wo, 0, mask, false);
-+	tasklet_schedule(&wo->mmio.irq_tasklet);
-+}
-+
-+static void
-+mtk_wed_wo_irq_disable(struct mtk_wed_wo *wo, u32 mask)
-+{
-+	mtk_wed_wo_set_isr_mask(wo, mask, 0, true);
-+}
-+
-+static void
-+mtk_wed_wo_kickout(struct mtk_wed_wo *wo)
-+{
-+	mtk_wed_mmio_w32(wo, MTK_WED_WO_CCIF_BUSY, 1 << MTK_WED_WO_TXCH_NUM);
-+	mtk_wed_mmio_w32(wo, MTK_WED_WO_CCIF_TCHNUM, MTK_WED_WO_TXCH_NUM);
-+}
-+
-+static void
-+mtk_wed_wo_queue_kick(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q,
-+		      u32 val)
-+{
-+	wmb();
-+	mtk_wed_mmio_w32(wo, q->regs.cpu_idx, val);
-+}
-+
-+static void *
-+mtk_wed_wo_dequeue(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q, u32 *len,
-+		   bool flush)
-+{
-+	int buf_len = SKB_WITH_OVERHEAD(q->buf_size);
-+	int index = (q->tail + 1) % q->n_desc;
-+	struct mtk_wed_wo_queue_entry *entry;
-+	struct mtk_wed_wo_queue_desc *desc;
-+	void *buf;
-+
-+	if (!q->queued)
-+		return NULL;
-+
-+	if (flush)
-+		q->desc[index].ctrl |= cpu_to_le32(MTK_WED_WO_CTL_DMA_DONE);
-+	else if (!(q->desc[index].ctrl & cpu_to_le32(MTK_WED_WO_CTL_DMA_DONE)))
-+		return NULL;
-+
-+	q->tail = index;
-+	q->queued--;
-+
-+	desc = &q->desc[index];
-+	entry = &q->entry[index];
-+	buf = entry->buf;
-+	if (len)
-+		*len = FIELD_GET(MTK_WED_WO_CTL_SD_LEN0,
-+				 le32_to_cpu(READ_ONCE(desc->ctrl)));
-+	if (buf)
-+		dma_unmap_single(wo->hw->dev, entry->addr, buf_len,
-+				 DMA_FROM_DEVICE);
-+	entry->buf = NULL;
-+
-+	return buf;
-+}
-+
-+static int
-+mtk_wed_wo_queue_refill(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q,
-+			gfp_t gfp, bool rx)
-+{
-+	enum dma_data_direction dir = rx ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
-+	int n_buf = 0;
-+
-+	spin_lock_bh(&q->lock);
-+	while (q->queued < q->n_desc) {
-+		void *buf = page_frag_alloc(&q->cache, q->buf_size, gfp);
-+		struct mtk_wed_wo_queue_entry *entry;
-+		dma_addr_t addr;
-+
-+		if (!buf)
-+			break;
-+
-+		addr = dma_map_single(wo->hw->dev, buf, q->buf_size, dir);
-+		if (unlikely(dma_mapping_error(wo->hw->dev, addr))) {
-+			skb_free_frag(buf);
-+			break;
-+		}
-+
-+		q->head = (q->head + 1) % q->n_desc;
-+		entry = &q->entry[q->head];
-+		entry->addr = addr;
-+		entry->len = q->buf_size;
-+		q->entry[q->head].buf = buf;
-+
-+		if (rx) {
-+			struct mtk_wed_wo_queue_desc *desc = &q->desc[q->head];
-+			u32 ctrl = MTK_WED_WO_CTL_LAST_SEC0 |
-+				   FIELD_PREP(MTK_WED_WO_CTL_SD_LEN0,
-+					      entry->len);
-+
-+			WRITE_ONCE(desc->buf0, cpu_to_le32(addr));
-+			WRITE_ONCE(desc->ctrl, cpu_to_le32(ctrl));
-+		}
-+		q->queued++;
-+		n_buf++;
-+	}
-+	spin_unlock_bh(&q->lock);
-+
-+	return n_buf;
-+}
-+
-+static void
-+mtk_wed_wo_rx_complete(struct mtk_wed_wo *wo)
-+{
-+	mtk_wed_wo_set_ack(wo, MTK_WED_WO_RXCH_INT_MASK);
-+	mtk_wed_wo_irq_enable(wo, MTK_WED_WO_RXCH_INT_MASK);
-+}
-+
-+static void
-+mtk_wed_wo_rx_run_queue(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q)
-+{
-+	for (;;) {
-+		struct mtk_wed_mcu_hdr *hdr;
-+		struct sk_buff *skb;
-+		void *data;
-+		u32 len;
-+
-+		data = mtk_wed_wo_dequeue(wo, q, &len, false);
-+		if (!data)
-+			break;
-+
-+		skb = build_skb(data, q->buf_size);
-+		if (!skb) {
-+			skb_free_frag(data);
-+			continue;
-+		}
-+
-+		__skb_put(skb, len);
-+		if (mtk_wed_mcu_check_msg(wo, skb)) {
-+			dev_kfree_skb(skb);
-+			continue;
-+		}
-+
-+		hdr = (struct mtk_wed_mcu_hdr *)skb->data;
-+		if (hdr->flag & cpu_to_le16(MTK_WED_WARP_CMD_FLAG_RSP))
-+			mtk_wed_mcu_rx_event(wo, skb);
-+		else
-+			mtk_wed_mcu_rx_unsolicited_event(wo, skb);
-+	}
-+
-+	if (mtk_wed_wo_queue_refill(wo, q, GFP_ATOMIC, true)) {
-+		u32 index = (q->head - 1) % q->n_desc;
-+
-+		mtk_wed_wo_queue_kick(wo, q, index);
-+	}
-+}
-+
-+static irqreturn_t
-+mtk_wed_wo_irq_handler(int irq, void *data)
-+{
-+	struct mtk_wed_wo *wo = data;
-+
-+	mtk_wed_wo_set_isr(wo, 0);
-+	tasklet_schedule(&wo->mmio.irq_tasklet);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static void mtk_wed_wo_irq_tasklet(struct tasklet_struct *t)
-+{
-+	struct mtk_wed_wo *wo = from_tasklet(wo, t, mmio.irq_tasklet);
-+	u32 intr, mask;
-+
-+	/* disable interrupts */
-+	mtk_wed_wo_set_isr(wo, 0);
-+
-+	intr = mtk_wed_wo_get_isr(wo);
-+	intr &= wo->mmio.irq_mask;
-+	mask = intr & (MTK_WED_WO_RXCH_INT_MASK | MTK_WED_WO_EXCEPTION_INT_MASK);
-+	mtk_wed_wo_irq_disable(wo, mask);
-+
-+	if (intr & MTK_WED_WO_RXCH_INT_MASK) {
-+		mtk_wed_wo_rx_run_queue(wo, &wo->q_rx);
-+		mtk_wed_wo_rx_complete(wo);
-+	}
-+}
-+
-+/* mtk wed wo hw queues */
-+
-+static int
-+mtk_wed_wo_queue_alloc(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q,
-+		       int n_desc, int buf_size, int index,
-+		       struct mtk_wed_wo_queue_regs *regs)
-+{
-+	spin_lock_init(&q->lock);
-+	q->regs = *regs;
-+	q->n_desc = n_desc;
-+	q->buf_size = buf_size;
-+
-+	q->desc = dmam_alloc_coherent(wo->hw->dev, n_desc * sizeof(*q->desc),
-+				      &q->desc_dma, GFP_KERNEL);
-+	if (!q->desc)
-+		return -ENOMEM;
-+
-+	q->entry = devm_kzalloc(wo->hw->dev, n_desc * sizeof(*q->entry),
-+				GFP_KERNEL);
-+	if (!q->entry)
-+		return -ENOMEM;
-+
-+	return 0;
-+}
-+
-+static void
-+mtk_wed_wo_queue_free(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q)
-+{
-+	mtk_wed_mmio_w32(wo, q->regs.cpu_idx, 0);
-+	dma_free_coherent(wo->hw->dev, q->n_desc * sizeof(*q->desc), q->desc,
-+			  q->desc_dma);
-+}
-+
-+static void
-+mtk_wed_wo_queue_tx_clean(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q)
-+{
-+	struct page *page;
-+	int i;
-+
-+	spin_lock_bh(&q->lock);
-+	for (i = 0; i < q->n_desc; i++) {
-+		struct mtk_wed_wo_queue_entry *entry = &q->entry[i];
-+
-+		dma_unmap_single(wo->hw->dev, entry->addr, entry->len,
-+				 DMA_TO_DEVICE);
-+		skb_free_frag(entry->buf);
-+		entry->buf = NULL;
-+	}
-+	spin_unlock_bh(&q->lock);
-+
-+	if (!q->cache.va)
-+		return;
-+
-+	page = virt_to_page(q->cache.va);
-+	__page_frag_cache_drain(page, q->cache.pagecnt_bias);
-+	memset(&q->cache, 0, sizeof(q->cache));
-+}
-+
-+static void
-+mtk_wed_wo_queue_rx_clean(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q)
-+{
-+	struct page *page;
-+
-+	spin_lock_bh(&q->lock);
-+	for (;;) {
-+		void *buf = mtk_wed_wo_dequeue(wo, q, NULL, true);
-+
-+		if (!buf)
-+			break;
-+
-+		skb_free_frag(buf);
-+	}
-+	spin_unlock_bh(&q->lock);
-+
-+	if (!q->cache.va)
-+		return;
-+
-+	page = virt_to_page(q->cache.va);
-+	__page_frag_cache_drain(page, q->cache.pagecnt_bias);
-+	memset(&q->cache, 0, sizeof(q->cache));
-+}
-+
-+static void
-+mtk_wed_wo_queue_reset(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q)
-+{
-+	mtk_wed_mmio_w32(wo, q->regs.cpu_idx, 0);
-+	mtk_wed_mmio_w32(wo, q->regs.desc_base, q->desc_dma);
-+	mtk_wed_mmio_w32(wo, q->regs.ring_size, q->n_desc);
-+}
-+
-+int mtk_wed_wo_queue_tx_skb(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q,
-+			    struct sk_buff *skb)
-+{
-+	struct mtk_wed_wo_queue_entry *entry;
-+	struct mtk_wed_wo_queue_desc *desc;
-+	int ret = 0, index;
-+	u32 ctrl;
-+
-+	spin_lock_bh(&q->lock);
-+
-+	q->tail = mtk_wed_mmio_r32(wo, q->regs.dma_idx);
-+	index = (q->head + 1) % q->n_desc;
-+	if (q->tail == index) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	entry = &q->entry[index];
-+	if (skb->len > entry->len) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	desc = &q->desc[index];
-+	q->head = index;
-+
-+	dma_sync_single_for_cpu(wo->hw->dev, entry->addr, skb->len,
-+				DMA_TO_DEVICE);
-+	memcpy(entry->buf, skb->data, skb->len);
-+	dma_sync_single_for_device(wo->hw->dev, entry->addr, skb->len,
-+				   DMA_TO_DEVICE);
-+
-+	ctrl = FIELD_PREP(MTK_WED_WO_CTL_SD_LEN0, skb->len) |
-+	       MTK_WED_WO_CTL_LAST_SEC0 | MTK_WED_WO_CTL_DMA_DONE;
-+	WRITE_ONCE(desc->buf0, cpu_to_le32(entry->addr));
-+	WRITE_ONCE(desc->ctrl, cpu_to_le32(ctrl));
-+
-+	mtk_wed_wo_queue_kick(wo, q, q->head);
-+	mtk_wed_wo_kickout(wo);
-+out:
-+	spin_unlock_bh(&q->lock);
-+
-+	dev_kfree_skb(skb);
-+
-+	return ret;
-+}
-+
-+static int
-+mtk_wed_wo_exception_init(struct mtk_wed_wo *wo)
-+{
-+	return 0;
-+}
-+
-+static int
-+mtk_wed_wo_hardware_init(struct mtk_wed_wo *wo)
-+{
-+	struct mtk_wed_wo_queue_regs regs;
-+	struct device_node *np;
-+	int ret;
-+
-+	np = of_parse_phandle(wo->hw->node, "mediatek,wo-ccif", 0);
-+	if (!np)
-+		return -ENODEV;
-+
-+	wo->mmio.regs = syscon_regmap_lookup_by_phandle(np, NULL);
-+	if (IS_ERR_OR_NULL(wo->mmio.regs))
-+		return PTR_ERR(wo->mmio.regs);
-+
-+	wo->mmio.irq = irq_of_parse_and_map(np, 0);
-+	wo->mmio.irq_mask = MTK_WED_WO_ALL_INT_MASK;
-+	spin_lock_init(&wo->mmio.lock);
-+	tasklet_setup(&wo->mmio.irq_tasklet, mtk_wed_wo_irq_tasklet);
-+
-+	ret = devm_request_irq(wo->hw->dev, wo->mmio.irq,
-+			       mtk_wed_wo_irq_handler, IRQF_TRIGGER_HIGH,
-+			       KBUILD_MODNAME, wo);
-+	if (ret)
-+		goto error;
-+
-+	regs.desc_base = MTK_WED_WO_CCIF_DUMMY1;
-+	regs.ring_size = MTK_WED_WO_CCIF_DUMMY2;
-+	regs.dma_idx = MTK_WED_WO_CCIF_SHADOW4;
-+	regs.cpu_idx = MTK_WED_WO_CCIF_DUMMY3;
-+
-+	ret = mtk_wed_wo_queue_alloc(wo, &wo->q_tx, MTK_WED_WO_RING_SIZE,
-+				     MTK_WED_WO_CMD_LEN, MTK_WED_WO_TXCH_NUM,
-+				     &regs);
-+	if (ret)
-+		goto error;
-+
-+	mtk_wed_wo_queue_refill(wo, &wo->q_tx, GFP_KERNEL, false);
-+	mtk_wed_wo_queue_reset(wo, &wo->q_tx);
-+
-+	regs.desc_base = MTK_WED_WO_CCIF_DUMMY5;
-+	regs.ring_size = MTK_WED_WO_CCIF_DUMMY6;
-+	regs.dma_idx = MTK_WED_WO_CCIF_SHADOW8;
-+	regs.cpu_idx = MTK_WED_WO_CCIF_DUMMY7;
-+
-+	ret = mtk_wed_wo_queue_alloc(wo, &wo->q_rx, MTK_WED_WO_RING_SIZE,
-+				     MTK_WED_WO_CMD_LEN, MTK_WED_WO_RXCH_NUM,
-+				     &regs);
-+	if (ret)
-+		goto error;
-+
-+	mtk_wed_wo_queue_refill(wo, &wo->q_rx, GFP_KERNEL, true);
-+	mtk_wed_wo_queue_reset(wo, &wo->q_rx);
-+
-+	/* rx queue irqmask */
-+	mtk_wed_wo_set_isr(wo, wo->mmio.irq_mask);
-+
-+	return 0;
-+
-+error:
-+	devm_free_irq(wo->hw->dev, wo->mmio.irq, wo);
-+
-+	return ret;
-+}
-+
-+static void
-+mtk_wed_wo_hw_deinit(struct mtk_wed_wo *wo)
-+{
-+	/* disable interrupts */
-+	mtk_wed_wo_set_isr(wo, 0);
-+
-+	tasklet_disable(&wo->mmio.irq_tasklet);
-+
-+	disable_irq(wo->mmio.irq);
-+	devm_free_irq(wo->hw->dev, wo->mmio.irq, wo);
-+
-+	mtk_wed_wo_queue_tx_clean(wo, &wo->q_tx);
-+	mtk_wed_wo_queue_rx_clean(wo, &wo->q_rx);
-+	mtk_wed_wo_queue_free(wo, &wo->q_tx);
-+	mtk_wed_wo_queue_free(wo, &wo->q_rx);
-+}
-+
-+int mtk_wed_wo_init(struct mtk_wed_hw *hw)
-+{
-+	struct mtk_wed_wo *wo;
-+	int ret;
-+
-+	wo = devm_kzalloc(hw->dev, sizeof(*wo), GFP_KERNEL);
-+	if (!wo)
-+		return -ENOMEM;
-+
-+	hw->wed_wo = wo;
-+	wo->hw = hw;
-+
-+	ret = mtk_wed_wo_hardware_init(wo);
-+	if (ret)
-+		return ret;
-+
-+	ret = mtk_wed_mcu_init(wo);
-+	if (ret)
-+		return ret;
-+
-+	return mtk_wed_wo_exception_init(wo);
-+}
-+
-+void mtk_wed_wo_deinit(struct mtk_wed_hw *hw)
-+{
-+	struct mtk_wed_wo *wo = hw->wed_wo;
-+
-+	mtk_wed_wo_hw_deinit(wo);
-+}
---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-@@ -80,6 +80,54 @@ enum mtk_wed_dummy_cr_idx {
- #define MTK_WO_MCU_CFG_LS_WF_WM_WA_WM_CPU_RSTB_MASK	BIT(5)
- #define MTK_WO_MCU_CFG_LS_WF_WM_WA_WA_CPU_RSTB_MASK	BIT(0)
- 
-+#define MTK_WED_WO_RING_SIZE	256
-+#define MTK_WED_WO_CMD_LEN	1504
-+
-+#define MTK_WED_WO_TXCH_NUM		0
-+#define MTK_WED_WO_RXCH_NUM		1
-+#define MTK_WED_WO_RXCH_WO_EXCEPTION	7
-+
-+#define MTK_WED_WO_TXCH_INT_MASK	BIT(0)
-+#define MTK_WED_WO_RXCH_INT_MASK	BIT(1)
-+#define MTK_WED_WO_EXCEPTION_INT_MASK	BIT(7)
-+#define MTK_WED_WO_ALL_INT_MASK		(MTK_WED_WO_RXCH_INT_MASK | \
-+					 MTK_WED_WO_EXCEPTION_INT_MASK)
-+
-+#define MTK_WED_WO_CCIF_BUSY		0x004
-+#define MTK_WED_WO_CCIF_START		0x008
-+#define MTK_WED_WO_CCIF_TCHNUM		0x00c
-+#define MTK_WED_WO_CCIF_RCHNUM		0x010
-+#define MTK_WED_WO_CCIF_RCHNUM_MASK	GENMASK(7, 0)
-+
-+#define MTK_WED_WO_CCIF_ACK		0x014
-+#define MTK_WED_WO_CCIF_IRQ0_MASK	0x018
-+#define MTK_WED_WO_CCIF_IRQ1_MASK	0x01c
-+#define MTK_WED_WO_CCIF_DUMMY1		0x020
-+#define MTK_WED_WO_CCIF_DUMMY2		0x024
-+#define MTK_WED_WO_CCIF_DUMMY3		0x028
-+#define MTK_WED_WO_CCIF_DUMMY4		0x02c
-+#define MTK_WED_WO_CCIF_SHADOW1		0x030
-+#define MTK_WED_WO_CCIF_SHADOW2		0x034
-+#define MTK_WED_WO_CCIF_SHADOW3		0x038
-+#define MTK_WED_WO_CCIF_SHADOW4		0x03c
-+#define MTK_WED_WO_CCIF_DUMMY5		0x050
-+#define MTK_WED_WO_CCIF_DUMMY6		0x054
-+#define MTK_WED_WO_CCIF_DUMMY7		0x058
-+#define MTK_WED_WO_CCIF_DUMMY8		0x05c
-+#define MTK_WED_WO_CCIF_SHADOW5		0x060
-+#define MTK_WED_WO_CCIF_SHADOW6		0x064
-+#define MTK_WED_WO_CCIF_SHADOW7		0x068
-+#define MTK_WED_WO_CCIF_SHADOW8		0x06c
-+
-+#define MTK_WED_WO_CTL_SD_LEN1		GENMASK(13, 0)
-+#define MTK_WED_WO_CTL_LAST_SEC1	BIT(14)
-+#define MTK_WED_WO_CTL_BURST		BIT(15)
-+#define MTK_WED_WO_CTL_SD_LEN0_SHIFT	16
-+#define MTK_WED_WO_CTL_SD_LEN0		GENMASK(29, 16)
-+#define MTK_WED_WO_CTL_LAST_SEC0	BIT(30)
-+#define MTK_WED_WO_CTL_DMA_DONE		BIT(31)
-+#define MTK_WED_WO_INFO_WINFO		GENMASK(15, 0)
-+
- struct mtk_wed_wo_memory_region {
- 	const char *name;
- 	void __iomem *addr;
-@@ -112,10 +160,53 @@ struct mtk_wed_fw_trailer {
- 	u32 crc;
- };
- 
-+struct mtk_wed_wo_queue_regs {
-+	u32 desc_base;
-+	u32 ring_size;
-+	u32 cpu_idx;
-+	u32 dma_idx;
-+};
-+
-+struct mtk_wed_wo_queue_desc {
-+	__le32 buf0;
-+	__le32 ctrl;
-+	__le32 buf1;
-+	__le32 info;
-+	__le32 reserved[4];
-+} __packed __aligned(32);
-+
-+struct mtk_wed_wo_queue_entry {
-+	dma_addr_t addr;
-+	void *buf;
-+	u32 len;
-+};
-+
-+struct mtk_wed_wo_queue {
-+	struct mtk_wed_wo_queue_regs regs;
-+
-+	struct page_frag_cache cache;
-+	spinlock_t lock;
-+
-+	struct mtk_wed_wo_queue_desc *desc;
-+	dma_addr_t desc_dma;
-+
-+	struct mtk_wed_wo_queue_entry *entry;
-+
-+	u16 head;
-+	u16 tail;
-+	int n_desc;
-+	int queued;
-+	int buf_size;
-+
-+};
-+
- struct mtk_wed_wo {
- 	struct mtk_wed_hw *hw;
- 	struct mtk_wed_wo_memory_region boot;
- 
-+	struct mtk_wed_wo_queue q_tx;
-+	struct mtk_wed_wo_queue q_rx;
-+
- 	struct {
- 		struct mutex mutex;
- 		int timeout;
-@@ -124,6 +215,15 @@ struct mtk_wed_wo {
- 		struct sk_buff_head res_q;
- 		wait_queue_head_t wait;
- 	} mcu;
-+
-+	struct {
-+		struct regmap *regs;
-+
-+		spinlock_t lock;
-+		struct tasklet_struct irq_tasklet;
-+		int irq;
-+		u32 irq_mask;
-+	} mmio;
- };
- 
- static inline int
-@@ -146,5 +246,9 @@ void mtk_wed_mcu_rx_unsolicited_event(st
- int mtk_wed_mcu_send_msg(struct mtk_wed_wo *wo, int id, int cmd,
- 			 const void *data, int len, bool wait_resp);
- int mtk_wed_mcu_init(struct mtk_wed_wo *wo);
-+int mtk_wed_wo_init(struct mtk_wed_hw *hw);
-+void mtk_wed_wo_deinit(struct mtk_wed_hw *hw);
-+int mtk_wed_wo_queue_tx_skb(struct mtk_wed_wo *dev, struct mtk_wed_wo_queue *q,
-+			    struct sk_buff *skb);
- 
- #endif /* __MTK_WED_WO_H */
diff --git a/target/linux/generic/backport-6.1/729-03-v6.1-net-ethernet-mtk_wed-rename-tx_wdma-array-in-rx_wdma.patch b/target/linux/generic/backport-6.1/729-03-v6.1-net-ethernet-mtk_wed-rename-tx_wdma-array-in-rx_wdma.patch
deleted file mode 100644
index a002a5f85163..000000000000
--- a/target/linux/generic/backport-6.1/729-03-v6.1-net-ethernet-mtk_wed-rename-tx_wdma-array-in-rx_wdma.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 5 Nov 2022 23:36:20 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: rename tx_wdma array in rx_wdma
-
-Rename tx_wdma queue array in rx_wdma since this is rx side of wdma soc.
-Moreover rename mtk_wed_wdma_ring_setup routine in
-mtk_wed_wdma_rx_ring_setup()
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -253,8 +253,8 @@ mtk_wed_free_tx_rings(struct mtk_wed_dev
- 
- 	for (i = 0; i < ARRAY_SIZE(dev->tx_ring); i++)
- 		mtk_wed_free_ring(dev, &dev->tx_ring[i]);
--	for (i = 0; i < ARRAY_SIZE(dev->tx_wdma); i++)
--		mtk_wed_free_ring(dev, &dev->tx_wdma[i]);
-+	for (i = 0; i < ARRAY_SIZE(dev->rx_wdma); i++)
-+		mtk_wed_free_ring(dev, &dev->rx_wdma[i]);
- }
- 
- static void
-@@ -688,10 +688,10 @@ mtk_wed_ring_alloc(struct mtk_wed_device
- }
- 
- static int
--mtk_wed_wdma_ring_setup(struct mtk_wed_device *dev, int idx, int size)
-+mtk_wed_wdma_rx_ring_setup(struct mtk_wed_device *dev, int idx, int size)
- {
- 	u32 desc_size = sizeof(struct mtk_wdma_desc) * dev->hw->version;
--	struct mtk_wed_ring *wdma = &dev->tx_wdma[idx];
-+	struct mtk_wed_ring *wdma = &dev->rx_wdma[idx];
- 
- 	if (mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE, desc_size))
- 		return -ENOMEM;
-@@ -805,9 +805,9 @@ mtk_wed_start(struct mtk_wed_device *dev
- {
- 	int i;
- 
--	for (i = 0; i < ARRAY_SIZE(dev->tx_wdma); i++)
--		if (!dev->tx_wdma[i].desc)
--			mtk_wed_wdma_ring_setup(dev, i, 16);
-+	for (i = 0; i < ARRAY_SIZE(dev->rx_wdma); i++)
-+		if (!dev->rx_wdma[i].desc)
-+			mtk_wed_wdma_rx_ring_setup(dev, i, 16);
- 
- 	mtk_wed_hw_init(dev);
- 	mtk_wed_configure_irq(dev, irq_mask);
-@@ -916,7 +916,7 @@ mtk_wed_tx_ring_setup(struct mtk_wed_dev
- 			       sizeof(*ring->desc)))
- 		return -ENOMEM;
- 
--	if (mtk_wed_wdma_ring_setup(dev, idx, MTK_WED_WDMA_RING_SIZE))
-+	if (mtk_wed_wdma_rx_ring_setup(dev, idx, MTK_WED_WDMA_RING_SIZE))
- 		return -ENOMEM;
- 
- 	ring->reg_base = MTK_WED_RING_TX(idx);
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -7,6 +7,7 @@
- #include <linux/pci.h>
- 
- #define MTK_WED_TX_QUEUES		2
-+#define MTK_WED_RX_QUEUES		2
- 
- struct mtk_wed_hw;
- struct mtk_wdma_desc;
-@@ -66,7 +67,7 @@ struct mtk_wed_device {
- 
- 	struct mtk_wed_ring tx_ring[MTK_WED_TX_QUEUES];
- 	struct mtk_wed_ring txfree_ring;
--	struct mtk_wed_ring tx_wdma[MTK_WED_TX_QUEUES];
-+	struct mtk_wed_ring rx_wdma[MTK_WED_RX_QUEUES];
- 
- 	struct {
- 		int size;
diff --git a/target/linux/generic/backport-6.1/729-04-v6.1-net-ethernet-mtk_wed-add-configure-wed-wo-support.patch b/target/linux/generic/backport-6.1/729-04-v6.1-net-ethernet-mtk_wed-add-configure-wed-wo-support.patch
deleted file mode 100644
index eca29739b4ae..000000000000
--- a/target/linux/generic/backport-6.1/729-04-v6.1-net-ethernet-mtk_wed-add-configure-wed-wo-support.patch
+++ /dev/null
@@ -1,1521 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 5 Nov 2022 23:36:21 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: add configure wed wo support
-
-Enable RX Wireless Ethernet Dispatch available on MT7986 Soc.
-
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -9,6 +9,7 @@
- #include <linux/skbuff.h>
- #include <linux/of_platform.h>
- #include <linux/of_address.h>
-+#include <linux/of_reserved_mem.h>
- #include <linux/mfd/syscon.h>
- #include <linux/debugfs.h>
- #include <linux/soc/mediatek/mtk_wed.h>
-@@ -23,6 +24,7 @@
- #define MTK_WED_PKT_SIZE		1900
- #define MTK_WED_BUF_SIZE		2048
- #define MTK_WED_BUF_PER_PAGE		(PAGE_SIZE / 2048)
-+#define MTK_WED_RX_RING_SIZE		1536
- 
- #define MTK_WED_TX_RING_SIZE		2048
- #define MTK_WED_WDMA_RING_SIZE		1024
-@@ -31,6 +33,10 @@
- #define MTK_WED_PER_GROUP_PKT		128
- 
- #define MTK_WED_FBUF_SIZE		128
-+#define MTK_WED_MIOD_CNT		16
-+#define MTK_WED_FB_CMD_CNT		1024
-+#define MTK_WED_RRO_QUE_CNT		8192
-+#define MTK_WED_MIOD_ENTRY_CNT		128
- 
- static struct mtk_wed_hw *hw_list[2];
- static DEFINE_MUTEX(hw_lock);
-@@ -65,12 +71,76 @@ wdma_set(struct mtk_wed_device *dev, u32
- 	wdma_m32(dev, reg, 0, mask);
- }
- 
-+static void
-+wdma_clr(struct mtk_wed_device *dev, u32 reg, u32 mask)
-+{
-+	wdma_m32(dev, reg, mask, 0);
-+}
-+
-+static u32
-+wifi_r32(struct mtk_wed_device *dev, u32 reg)
-+{
-+	return readl(dev->wlan.base + reg);
-+}
-+
-+static void
-+wifi_w32(struct mtk_wed_device *dev, u32 reg, u32 val)
-+{
-+	writel(val, dev->wlan.base + reg);
-+}
-+
- static u32
- mtk_wed_read_reset(struct mtk_wed_device *dev)
- {
- 	return wed_r32(dev, MTK_WED_RESET);
- }
- 
-+static u32
-+mtk_wdma_read_reset(struct mtk_wed_device *dev)
-+{
-+	return wdma_r32(dev, MTK_WDMA_GLO_CFG);
-+}
-+
-+static void
-+mtk_wdma_rx_reset(struct mtk_wed_device *dev)
-+{
-+	u32 status, mask = MTK_WDMA_GLO_CFG_RX_DMA_BUSY;
-+	int i;
-+
-+	wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_RX_DMA_EN);
-+	if (readx_poll_timeout(mtk_wdma_read_reset, dev, status,
-+			       !(status & mask), 0, 1000))
-+		dev_err(dev->hw->dev, "rx reset failed\n");
-+
-+	for (i = 0; i < ARRAY_SIZE(dev->rx_wdma); i++) {
-+		if (dev->rx_wdma[i].desc)
-+			continue;
-+
-+		wdma_w32(dev,
-+			 MTK_WDMA_RING_RX(i) + MTK_WED_RING_OFS_CPU_IDX, 0);
-+	}
-+}
-+
-+static void
-+mtk_wdma_tx_reset(struct mtk_wed_device *dev)
-+{
-+	u32 status, mask = MTK_WDMA_GLO_CFG_TX_DMA_BUSY;
-+	int i;
-+
-+	wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_TX_DMA_EN);
-+	if (readx_poll_timeout(mtk_wdma_read_reset, dev, status,
-+			       !(status & mask), 0, 1000))
-+		dev_err(dev->hw->dev, "tx reset failed\n");
-+
-+	for (i = 0; i < ARRAY_SIZE(dev->tx_wdma); i++) {
-+		if (dev->tx_wdma[i].desc)
-+			continue;
-+
-+		wdma_w32(dev,
-+			 MTK_WDMA_RING_TX(i) + MTK_WED_RING_OFS_CPU_IDX, 0);
-+	}
-+}
-+
- static void
- mtk_wed_reset(struct mtk_wed_device *dev, u32 mask)
- {
-@@ -82,6 +152,54 @@ mtk_wed_reset(struct mtk_wed_device *dev
- 		WARN_ON_ONCE(1);
- }
- 
-+static u32
-+mtk_wed_wo_read_status(struct mtk_wed_device *dev)
-+{
-+	return wed_r32(dev, MTK_WED_SCR0 + 4 * MTK_WED_DUMMY_CR_WO_STATUS);
-+}
-+
-+static void
-+mtk_wed_wo_reset(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wed_wo *wo = dev->hw->wed_wo;
-+	u8 state = MTK_WED_WO_STATE_DISABLE;
-+	void __iomem *reg;
-+	u32 val;
-+
-+	mtk_wdma_tx_reset(dev);
-+	mtk_wed_reset(dev, MTK_WED_RESET_WED);
-+
-+	mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO,
-+			     MTK_WED_WO_CMD_CHANGE_STATE, &state,
-+			     sizeof(state), false);
-+
-+	if (readx_poll_timeout(mtk_wed_wo_read_status, dev, val,
-+			       val == MTK_WED_WOIF_DISABLE_DONE,
-+			       100, MTK_WOCPU_TIMEOUT))
-+		dev_err(dev->hw->dev, "failed to disable wed-wo\n");
-+
-+	reg = ioremap(MTK_WED_WO_CPU_MCUSYS_RESET_ADDR, 4);
-+
-+	val = readl(reg);
-+	switch (dev->hw->index) {
-+	case 0:
-+		val |= MTK_WED_WO_CPU_WO0_MCUSYS_RESET_MASK;
-+		writel(val, reg);
-+		val &= ~MTK_WED_WO_CPU_WO0_MCUSYS_RESET_MASK;
-+		writel(val, reg);
-+		break;
-+	case 1:
-+		val |= MTK_WED_WO_CPU_WO1_MCUSYS_RESET_MASK;
-+		writel(val, reg);
-+		val &= ~MTK_WED_WO_CPU_WO1_MCUSYS_RESET_MASK;
-+		writel(val, reg);
-+		break;
-+	default:
-+		break;
-+	}
-+	iounmap(reg);
-+}
-+
- static struct mtk_wed_hw *
- mtk_wed_assign(struct mtk_wed_device *dev)
- {
-@@ -116,7 +234,7 @@ out:
- }
- 
- static int
--mtk_wed_buffer_alloc(struct mtk_wed_device *dev)
-+mtk_wed_tx_buffer_alloc(struct mtk_wed_device *dev)
- {
- 	struct mtk_wdma_desc *desc;
- 	dma_addr_t desc_phys;
-@@ -133,16 +251,16 @@ mtk_wed_buffer_alloc(struct mtk_wed_devi
- 	if (!page_list)
- 		return -ENOMEM;
- 
--	dev->buf_ring.size = ring_size;
--	dev->buf_ring.pages = page_list;
-+	dev->tx_buf_ring.size = ring_size;
-+	dev->tx_buf_ring.pages = page_list;
- 
- 	desc = dma_alloc_coherent(dev->hw->dev, ring_size * sizeof(*desc),
- 				  &desc_phys, GFP_KERNEL);
- 	if (!desc)
- 		return -ENOMEM;
- 
--	dev->buf_ring.desc = desc;
--	dev->buf_ring.desc_phys = desc_phys;
-+	dev->tx_buf_ring.desc = desc;
-+	dev->tx_buf_ring.desc_phys = desc_phys;
- 
- 	for (i = 0, page_idx = 0; i < ring_size; i += MTK_WED_BUF_PER_PAGE) {
- 		dma_addr_t page_phys, buf_phys;
-@@ -203,10 +321,10 @@ mtk_wed_buffer_alloc(struct mtk_wed_devi
- }
- 
- static void
--mtk_wed_free_buffer(struct mtk_wed_device *dev)
-+mtk_wed_free_tx_buffer(struct mtk_wed_device *dev)
- {
--	struct mtk_wdma_desc *desc = dev->buf_ring.desc;
--	void **page_list = dev->buf_ring.pages;
-+	struct mtk_wdma_desc *desc = dev->tx_buf_ring.desc;
-+	void **page_list = dev->tx_buf_ring.pages;
- 	int page_idx;
- 	int i;
- 
-@@ -216,7 +334,8 @@ mtk_wed_free_buffer(struct mtk_wed_devic
- 	if (!desc)
- 		goto free_pagelist;
- 
--	for (i = 0, page_idx = 0; i < dev->buf_ring.size; i += MTK_WED_BUF_PER_PAGE) {
-+	for (i = 0, page_idx = 0; i < dev->tx_buf_ring.size;
-+	     i += MTK_WED_BUF_PER_PAGE) {
- 		void *page = page_list[page_idx++];
- 		dma_addr_t buf_addr;
- 
-@@ -229,13 +348,59 @@ mtk_wed_free_buffer(struct mtk_wed_devic
- 		__free_page(page);
- 	}
- 
--	dma_free_coherent(dev->hw->dev, dev->buf_ring.size * sizeof(*desc),
--			  desc, dev->buf_ring.desc_phys);
-+	dma_free_coherent(dev->hw->dev, dev->tx_buf_ring.size * sizeof(*desc),
-+			  desc, dev->tx_buf_ring.desc_phys);
- 
- free_pagelist:
- 	kfree(page_list);
- }
- 
-+static int
-+mtk_wed_rx_buffer_alloc(struct mtk_wed_device *dev)
-+{
-+	struct mtk_rxbm_desc *desc;
-+	dma_addr_t desc_phys;
-+
-+	dev->rx_buf_ring.size = dev->wlan.rx_nbuf;
-+	desc = dma_alloc_coherent(dev->hw->dev,
-+				  dev->wlan.rx_nbuf * sizeof(*desc),
-+				  &desc_phys, GFP_KERNEL);
-+	if (!desc)
-+		return -ENOMEM;
-+
-+	dev->rx_buf_ring.desc = desc;
-+	dev->rx_buf_ring.desc_phys = desc_phys;
-+	dev->wlan.init_rx_buf(dev, dev->wlan.rx_npkt);
-+
-+	return 0;
-+}
-+
-+static void
-+mtk_wed_free_rx_buffer(struct mtk_wed_device *dev)
-+{
-+	struct mtk_rxbm_desc *desc = dev->rx_buf_ring.desc;
-+
-+	if (!desc)
-+		return;
-+
-+	dev->wlan.release_rx_buf(dev);
-+	dma_free_coherent(dev->hw->dev, dev->rx_buf_ring.size * sizeof(*desc),
-+			  desc, dev->rx_buf_ring.desc_phys);
-+}
-+
-+static void
-+mtk_wed_rx_buffer_hw_init(struct mtk_wed_device *dev)
-+{
-+	wed_w32(dev, MTK_WED_RX_BM_RX_DMAD,
-+		FIELD_PREP(MTK_WED_RX_BM_RX_DMAD_SDL0, dev->wlan.rx_size));
-+	wed_w32(dev, MTK_WED_RX_BM_BASE, dev->rx_buf_ring.desc_phys);
-+	wed_w32(dev, MTK_WED_RX_BM_INIT_PTR, MTK_WED_RX_BM_INIT_SW_TAIL |
-+		FIELD_PREP(MTK_WED_RX_BM_SW_TAIL, dev->wlan.rx_npkt));
-+	wed_w32(dev, MTK_WED_RX_BM_DYN_ALLOC_TH,
-+		FIELD_PREP(MTK_WED_RX_BM_DYN_ALLOC_TH_H, 0xffff));
-+	wed_set(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_RX_BM_EN);
-+}
-+
- static void
- mtk_wed_free_ring(struct mtk_wed_device *dev, struct mtk_wed_ring *ring)
- {
-@@ -247,6 +412,13 @@ mtk_wed_free_ring(struct mtk_wed_device
- }
- 
- static void
-+mtk_wed_free_rx_rings(struct mtk_wed_device *dev)
-+{
-+	mtk_wed_free_rx_buffer(dev);
-+	mtk_wed_free_ring(dev, &dev->rro.ring);
-+}
-+
-+static void
- mtk_wed_free_tx_rings(struct mtk_wed_device *dev)
- {
- 	int i;
-@@ -291,6 +463,38 @@ mtk_wed_set_512_support(struct mtk_wed_d
- 	}
- }
- 
-+#define MTK_WFMDA_RX_DMA_EN	BIT(2)
-+static void
-+mtk_wed_check_wfdma_rx_fill(struct mtk_wed_device *dev, int idx)
-+{
-+	u32 val;
-+	int i;
-+
-+	if (!(dev->rx_ring[idx].flags & MTK_WED_RING_CONFIGURED))
-+		return; /* queue is not configured by mt76 */
-+
-+	for (i = 0; i < 3; i++) {
-+		u32 cur_idx;
-+
-+		cur_idx = wed_r32(dev,
-+				  MTK_WED_WPDMA_RING_RX_DATA(idx) +
-+				  MTK_WED_RING_OFS_CPU_IDX);
-+		if (cur_idx == MTK_WED_RX_RING_SIZE - 1)
-+			break;
-+
-+		usleep_range(100000, 200000);
-+	}
-+
-+	if (i == 3) {
-+		dev_err(dev->hw->dev, "rx dma enable failed\n");
-+		return;
-+	}
-+
-+	val = wifi_r32(dev, dev->wlan.wpdma_rx_glo - dev->wlan.phy_base) |
-+	      MTK_WFMDA_RX_DMA_EN;
-+	wifi_w32(dev, dev->wlan.wpdma_rx_glo - dev->wlan.phy_base, val);
-+}
-+
- static void
- mtk_wed_dma_disable(struct mtk_wed_device *dev)
- {
-@@ -304,20 +508,25 @@ mtk_wed_dma_disable(struct mtk_wed_devic
- 		MTK_WED_GLO_CFG_TX_DMA_EN |
- 		MTK_WED_GLO_CFG_RX_DMA_EN);
- 
--	wdma_m32(dev, MTK_WDMA_GLO_CFG,
-+	wdma_clr(dev, MTK_WDMA_GLO_CFG,
- 		 MTK_WDMA_GLO_CFG_TX_DMA_EN |
- 		 MTK_WDMA_GLO_CFG_RX_INFO1_PRERES |
--		 MTK_WDMA_GLO_CFG_RX_INFO2_PRERES, 0);
-+		 MTK_WDMA_GLO_CFG_RX_INFO2_PRERES);
- 
- 	if (dev->hw->version == 1) {
- 		regmap_write(dev->hw->mirror, dev->hw->index * 4, 0);
--		wdma_m32(dev, MTK_WDMA_GLO_CFG,
--			 MTK_WDMA_GLO_CFG_RX_INFO3_PRERES, 0);
-+		wdma_clr(dev, MTK_WDMA_GLO_CFG,
-+			 MTK_WDMA_GLO_CFG_RX_INFO3_PRERES);
- 	} else {
- 		wed_clr(dev, MTK_WED_WPDMA_GLO_CFG,
- 			MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_PKT_PROC |
- 			MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_CRX_SYNC);
- 
-+		wed_clr(dev, MTK_WED_WPDMA_RX_D_GLO_CFG,
-+			MTK_WED_WPDMA_RX_D_RX_DRV_EN);
-+		wed_clr(dev, MTK_WED_WDMA_GLO_CFG,
-+			MTK_WED_WDMA_GLO_CFG_TX_DDONE_CHK);
-+
- 		mtk_wed_set_512_support(dev, false);
- 	}
- }
-@@ -338,6 +547,13 @@ mtk_wed_stop(struct mtk_wed_device *dev)
- 	wdma_w32(dev, MTK_WDMA_INT_MASK, 0);
- 	wdma_w32(dev, MTK_WDMA_INT_GRP2, 0);
- 	wed_w32(dev, MTK_WED_WPDMA_INT_MASK, 0);
-+
-+	if (dev->hw->version == 1)
-+		return;
-+
-+	wed_w32(dev, MTK_WED_EXT_INT_MASK1, 0);
-+	wed_w32(dev, MTK_WED_EXT_INT_MASK2, 0);
-+	wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_RX_BM_EN);
- }
- 
- static void
-@@ -353,11 +569,21 @@ mtk_wed_detach(struct mtk_wed_device *de
- 	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
- 
- 	mtk_wed_reset(dev, MTK_WED_RESET_WED);
-+	if (mtk_wed_get_rx_capa(dev)) {
-+		wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_TX_DMA_EN);
-+		wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_TX);
-+		wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
-+	}
- 
--	mtk_wed_free_buffer(dev);
-+	mtk_wed_free_tx_buffer(dev);
- 	mtk_wed_free_tx_rings(dev);
--	if (hw->version != 1)
-+
-+	if (mtk_wed_get_rx_capa(dev)) {
-+		mtk_wed_wo_reset(dev);
-+		mtk_wed_free_rx_rings(dev);
- 		mtk_wed_wo_deinit(hw);
-+		mtk_wdma_rx_reset(dev);
-+	}
- 
- 	if (dev->wlan.bus_type == MTK_WED_BUS_PCIE) {
- 		struct device_node *wlan_node;
-@@ -434,10 +660,12 @@ mtk_wed_set_wpdma(struct mtk_wed_device
- 	} else {
- 		mtk_wed_bus_init(dev);
- 
--		wed_w32(dev, MTK_WED_WPDMA_CFG_BASE,  dev->wlan.wpdma_int);
--		wed_w32(dev, MTK_WED_WPDMA_CFG_INT_MASK,  dev->wlan.wpdma_mask);
--		wed_w32(dev, MTK_WED_WPDMA_CFG_TX,  dev->wlan.wpdma_tx);
--		wed_w32(dev, MTK_WED_WPDMA_CFG_TX_FREE,  dev->wlan.wpdma_txfree);
-+		wed_w32(dev, MTK_WED_WPDMA_CFG_BASE, dev->wlan.wpdma_int);
-+		wed_w32(dev, MTK_WED_WPDMA_CFG_INT_MASK, dev->wlan.wpdma_mask);
-+		wed_w32(dev, MTK_WED_WPDMA_CFG_TX, dev->wlan.wpdma_tx);
-+		wed_w32(dev, MTK_WED_WPDMA_CFG_TX_FREE, dev->wlan.wpdma_txfree);
-+		wed_w32(dev, MTK_WED_WPDMA_RX_GLO_CFG, dev->wlan.wpdma_rx_glo);
-+		wed_w32(dev, MTK_WED_WPDMA_RX_RING, dev->wlan.wpdma_rx);
- 	}
- }
- 
-@@ -487,6 +715,132 @@ mtk_wed_hw_init_early(struct mtk_wed_dev
- 	}
- }
- 
-+static int
-+mtk_wed_rro_ring_alloc(struct mtk_wed_device *dev, struct mtk_wed_ring *ring,
-+		       int size)
-+{
-+	ring->desc = dma_alloc_coherent(dev->hw->dev,
-+					size * sizeof(*ring->desc),
-+					&ring->desc_phys, GFP_KERNEL);
-+	if (!ring->desc)
-+		return -ENOMEM;
-+
-+	ring->desc_size = sizeof(*ring->desc);
-+	ring->size = size;
-+	memset(ring->desc, 0, size);
-+
-+	return 0;
-+}
-+
-+#define MTK_WED_MIOD_COUNT	(MTK_WED_MIOD_ENTRY_CNT * MTK_WED_MIOD_CNT)
-+static int
-+mtk_wed_rro_alloc(struct mtk_wed_device *dev)
-+{
-+	struct reserved_mem *rmem;
-+	struct device_node *np;
-+	int index;
-+
-+	index = of_property_match_string(dev->hw->node, "memory-region-names",
-+					 "wo-dlm");
-+	if (index < 0)
-+		return index;
-+
-+	np = of_parse_phandle(dev->hw->node, "memory-region", index);
-+	if (!np)
-+		return -ENODEV;
-+
-+	rmem = of_reserved_mem_lookup(np);
-+	of_node_put(np);
-+
-+	if (!rmem)
-+		return -ENODEV;
-+
-+	dev->rro.miod_phys = rmem->base;
-+	dev->rro.fdbk_phys = MTK_WED_MIOD_COUNT + dev->rro.miod_phys;
-+
-+	return mtk_wed_rro_ring_alloc(dev, &dev->rro.ring,
-+				      MTK_WED_RRO_QUE_CNT);
-+}
-+
-+static int
-+mtk_wed_rro_cfg(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wed_wo *wo = dev->hw->wed_wo;
-+	struct {
-+		struct {
-+			__le32 base;
-+			__le32 cnt;
-+			__le32 unit;
-+		} ring[2];
-+		__le32 wed;
-+		u8 version;
-+	} req = {
-+		.ring[0] = {
-+			.base = cpu_to_le32(MTK_WED_WOCPU_VIEW_MIOD_BASE),
-+			.cnt = cpu_to_le32(MTK_WED_MIOD_CNT),
-+			.unit = cpu_to_le32(MTK_WED_MIOD_ENTRY_CNT),
-+		},
-+		.ring[1] = {
-+			.base = cpu_to_le32(MTK_WED_WOCPU_VIEW_MIOD_BASE +
-+					    MTK_WED_MIOD_COUNT),
-+			.cnt = cpu_to_le32(MTK_WED_FB_CMD_CNT),
-+			.unit = cpu_to_le32(4),
-+		},
-+	};
-+
-+	return mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO,
-+				    MTK_WED_WO_CMD_WED_CFG,
-+				    &req, sizeof(req), true);
-+}
-+
-+static void
-+mtk_wed_rro_hw_init(struct mtk_wed_device *dev)
-+{
-+	wed_w32(dev, MTK_WED_RROQM_MIOD_CFG,
-+		FIELD_PREP(MTK_WED_RROQM_MIOD_MID_DW, 0x70 >> 2) |
-+		FIELD_PREP(MTK_WED_RROQM_MIOD_MOD_DW, 0x10 >> 2) |
-+		FIELD_PREP(MTK_WED_RROQM_MIOD_ENTRY_DW,
-+			   MTK_WED_MIOD_ENTRY_CNT >> 2));
-+
-+	wed_w32(dev, MTK_WED_RROQM_MIOD_CTRL0, dev->rro.miod_phys);
-+	wed_w32(dev, MTK_WED_RROQM_MIOD_CTRL1,
-+		FIELD_PREP(MTK_WED_RROQM_MIOD_CNT, MTK_WED_MIOD_CNT));
-+	wed_w32(dev, MTK_WED_RROQM_FDBK_CTRL0, dev->rro.fdbk_phys);
-+	wed_w32(dev, MTK_WED_RROQM_FDBK_CTRL1,
-+		FIELD_PREP(MTK_WED_RROQM_FDBK_CNT, MTK_WED_FB_CMD_CNT));
-+	wed_w32(dev, MTK_WED_RROQM_FDBK_CTRL2, 0);
-+	wed_w32(dev, MTK_WED_RROQ_BASE_L, dev->rro.ring.desc_phys);
-+
-+	wed_set(dev, MTK_WED_RROQM_RST_IDX,
-+		MTK_WED_RROQM_RST_IDX_MIOD |
-+		MTK_WED_RROQM_RST_IDX_FDBK);
-+
-+	wed_w32(dev, MTK_WED_RROQM_RST_IDX, 0);
-+	wed_w32(dev, MTK_WED_RROQM_MIOD_CTRL2, MTK_WED_MIOD_CNT - 1);
-+	wed_set(dev, MTK_WED_CTRL, MTK_WED_CTRL_RX_RRO_QM_EN);
-+}
-+
-+static void
-+mtk_wed_route_qm_hw_init(struct mtk_wed_device *dev)
-+{
-+	wed_w32(dev, MTK_WED_RESET, MTK_WED_RESET_RX_ROUTE_QM);
-+
-+	for (;;) {
-+		usleep_range(100, 200);
-+		if (!(wed_r32(dev, MTK_WED_RESET) & MTK_WED_RESET_RX_ROUTE_QM))
-+			break;
-+	}
-+
-+	/* configure RX_ROUTE_QM */
-+	wed_clr(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_Q_RST);
-+	wed_clr(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_TXDMAD_FPORT);
-+	wed_set(dev, MTK_WED_RTQM_GLO_CFG,
-+		FIELD_PREP(MTK_WED_RTQM_TXDMAD_FPORT, 0x3 + dev->hw->index));
-+	wed_clr(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_Q_RST);
-+	/* enable RX_ROUTE_QM */
-+	wed_set(dev, MTK_WED_CTRL, MTK_WED_CTRL_RX_ROUTE_QM_EN);
-+}
-+
- static void
- mtk_wed_hw_init(struct mtk_wed_device *dev)
- {
-@@ -498,11 +852,11 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 	wed_w32(dev, MTK_WED_TX_BM_CTRL,
- 		MTK_WED_TX_BM_CTRL_PAUSE |
- 		FIELD_PREP(MTK_WED_TX_BM_CTRL_VLD_GRP_NUM,
--			   dev->buf_ring.size / 128) |
-+			   dev->tx_buf_ring.size / 128) |
- 		FIELD_PREP(MTK_WED_TX_BM_CTRL_RSV_GRP_NUM,
- 			   MTK_WED_TX_RING_SIZE / 256));
- 
--	wed_w32(dev, MTK_WED_TX_BM_BASE, dev->buf_ring.desc_phys);
-+	wed_w32(dev, MTK_WED_TX_BM_BASE, dev->tx_buf_ring.desc_phys);
- 
- 	wed_w32(dev, MTK_WED_TX_BM_BUF_LEN, MTK_WED_PKT_SIZE);
- 
-@@ -529,9 +883,9 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 		wed_w32(dev, MTK_WED_TX_TKID_CTRL,
- 			MTK_WED_TX_TKID_CTRL_PAUSE |
- 			FIELD_PREP(MTK_WED_TX_TKID_CTRL_VLD_GRP_NUM,
--				   dev->buf_ring.size / 128) |
-+				   dev->tx_buf_ring.size / 128) |
- 			FIELD_PREP(MTK_WED_TX_TKID_CTRL_RSV_GRP_NUM,
--				   dev->buf_ring.size / 128));
-+				   dev->tx_buf_ring.size / 128));
- 		wed_w32(dev, MTK_WED_TX_TKID_DYN_THR,
- 			FIELD_PREP(MTK_WED_TX_TKID_DYN_THR_LO, 0) |
- 			MTK_WED_TX_TKID_DYN_THR_HI);
-@@ -539,18 +893,28 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 
- 	mtk_wed_reset(dev, MTK_WED_RESET_TX_BM);
- 
--	if (dev->hw->version == 1)
-+	if (dev->hw->version == 1) {
- 		wed_set(dev, MTK_WED_CTRL,
- 			MTK_WED_CTRL_WED_TX_BM_EN |
- 			MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
--	else
-+	} else {
- 		wed_clr(dev, MTK_WED_TX_TKID_CTRL, MTK_WED_TX_TKID_CTRL_PAUSE);
-+		/* rx hw init */
-+		wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX,
-+			MTK_WED_WPDMA_RX_D_RST_CRX_IDX |
-+			MTK_WED_WPDMA_RX_D_RST_DRV_IDX);
-+		wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX, 0);
-+
-+		mtk_wed_rx_buffer_hw_init(dev);
-+		mtk_wed_rro_hw_init(dev);
-+		mtk_wed_route_qm_hw_init(dev);
-+	}
- 
- 	wed_clr(dev, MTK_WED_TX_BM_CTRL, MTK_WED_TX_BM_CTRL_PAUSE);
- }
- 
- static void
--mtk_wed_ring_reset(struct mtk_wed_ring *ring, int size)
-+mtk_wed_ring_reset(struct mtk_wed_ring *ring, int size, bool tx)
- {
- 	void *head = (void *)ring->desc;
- 	int i;
-@@ -560,7 +924,10 @@ mtk_wed_ring_reset(struct mtk_wed_ring *
- 
- 		desc = (struct mtk_wdma_desc *)(head + i * ring->desc_size);
- 		desc->buf0 = 0;
--		desc->ctrl = cpu_to_le32(MTK_WDMA_DESC_CTRL_DMA_DONE);
-+		if (tx)
-+			desc->ctrl = cpu_to_le32(MTK_WDMA_DESC_CTRL_DMA_DONE);
-+		else
-+			desc->ctrl = cpu_to_le32(MTK_WFDMA_DESC_CTRL_TO_HOST);
- 		desc->buf1 = 0;
- 		desc->info = 0;
- 	}
-@@ -616,7 +983,8 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 		if (!dev->tx_ring[i].desc)
- 			continue;
- 
--		mtk_wed_ring_reset(&dev->tx_ring[i], MTK_WED_TX_RING_SIZE);
-+		mtk_wed_ring_reset(&dev->tx_ring[i], MTK_WED_TX_RING_SIZE,
-+				   true);
- 	}
- 
- 	if (mtk_wed_poll_busy(dev))
-@@ -634,6 +1002,9 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
- 	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
- 
-+	if (mtk_wed_get_rx_capa(dev))
-+		mtk_wdma_rx_reset(dev);
-+
- 	if (busy) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_WDMA_INT_AGENT);
- 		mtk_wed_reset(dev, MTK_WED_RESET_WDMA_RX_DRV);
-@@ -668,12 +1039,11 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 			MTK_WED_WPDMA_RESET_IDX_RX);
- 		wed_w32(dev, MTK_WED_WPDMA_RESET_IDX, 0);
- 	}
--
- }
- 
- static int
- mtk_wed_ring_alloc(struct mtk_wed_device *dev, struct mtk_wed_ring *ring,
--		   int size, u32 desc_size)
-+		   int size, u32 desc_size, bool tx)
- {
- 	ring->desc = dma_alloc_coherent(dev->hw->dev, size * desc_size,
- 					&ring->desc_phys, GFP_KERNEL);
-@@ -682,7 +1052,7 @@ mtk_wed_ring_alloc(struct mtk_wed_device
- 
- 	ring->desc_size = desc_size;
- 	ring->size = size;
--	mtk_wed_ring_reset(ring, size);
-+	mtk_wed_ring_reset(ring, size, tx);
- 
- 	return 0;
- }
-@@ -691,9 +1061,14 @@ static int
- mtk_wed_wdma_rx_ring_setup(struct mtk_wed_device *dev, int idx, int size)
- {
- 	u32 desc_size = sizeof(struct mtk_wdma_desc) * dev->hw->version;
--	struct mtk_wed_ring *wdma = &dev->rx_wdma[idx];
-+	struct mtk_wed_ring *wdma;
- 
--	if (mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE, desc_size))
-+	if (idx >= ARRAY_SIZE(dev->rx_wdma))
-+		return -EINVAL;
-+
-+	wdma = &dev->rx_wdma[idx];
-+	if (mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE, desc_size,
-+			       true))
- 		return -ENOMEM;
- 
- 	wdma_w32(dev, MTK_WDMA_RING_RX(idx) + MTK_WED_RING_OFS_BASE,
-@@ -710,6 +1085,60 @@ mtk_wed_wdma_rx_ring_setup(struct mtk_we
- 	return 0;
- }
- 
-+static int
-+mtk_wed_wdma_tx_ring_setup(struct mtk_wed_device *dev, int idx, int size)
-+{
-+	u32 desc_size = sizeof(struct mtk_wdma_desc) * dev->hw->version;
-+	struct mtk_wed_ring *wdma;
-+
-+	if (idx >= ARRAY_SIZE(dev->tx_wdma))
-+		return -EINVAL;
-+
-+	wdma = &dev->tx_wdma[idx];
-+	if (mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE, desc_size,
-+			       true))
-+		return -ENOMEM;
-+
-+	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_BASE,
-+		 wdma->desc_phys);
-+	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_COUNT,
-+		 size);
-+	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_CPU_IDX, 0);
-+	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_DMA_IDX, 0);
-+
-+	if (!idx)  {
-+		wed_w32(dev, MTK_WED_WDMA_RING_TX + MTK_WED_RING_OFS_BASE,
-+			wdma->desc_phys);
-+		wed_w32(dev, MTK_WED_WDMA_RING_TX + MTK_WED_RING_OFS_COUNT,
-+			size);
-+		wed_w32(dev, MTK_WED_WDMA_RING_TX + MTK_WED_RING_OFS_CPU_IDX,
-+			0);
-+		wed_w32(dev, MTK_WED_WDMA_RING_TX + MTK_WED_RING_OFS_DMA_IDX,
-+			0);
-+	}
-+
-+	return 0;
-+}
-+
-+static void
-+mtk_wed_ppe_check(struct mtk_wed_device *dev, struct sk_buff *skb,
-+		  u32 reason, u32 hash)
-+{
-+	struct mtk_eth *eth = dev->hw->eth;
-+	struct ethhdr *eh;
-+
-+	if (!skb)
-+		return;
-+
-+	if (reason != MTK_PPE_CPU_REASON_HIT_UNBIND_RATE_REACHED)
-+		return;
-+
-+	skb_set_mac_header(skb, 0);
-+	eh = eth_hdr(skb);
-+	skb->protocol = eh->h_proto;
-+	mtk_ppe_check_skb(eth->ppe[dev->hw->index], skb, hash);
-+}
-+
- static void
- mtk_wed_configure_irq(struct mtk_wed_device *dev, u32 irq_mask)
- {
-@@ -732,6 +1161,8 @@ mtk_wed_configure_irq(struct mtk_wed_dev
- 
- 		wed_clr(dev, MTK_WED_WDMA_INT_CTRL, wdma_mask);
- 	} else {
-+		wdma_mask |= FIELD_PREP(MTK_WDMA_INT_MASK_TX_DONE,
-+					GENMASK(1, 0));
- 		/* initail tx interrupt trigger */
- 		wed_w32(dev, MTK_WED_WPDMA_INT_CTRL_TX,
- 			MTK_WED_WPDMA_INT_CTRL_TX0_DONE_EN |
-@@ -750,6 +1181,16 @@ mtk_wed_configure_irq(struct mtk_wed_dev
- 			FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_TX_FREE_DONE_TRIG,
- 				   dev->wlan.txfree_tbit));
- 
-+		wed_w32(dev, MTK_WED_WPDMA_INT_CTRL_RX,
-+			MTK_WED_WPDMA_INT_CTRL_RX0_EN |
-+			MTK_WED_WPDMA_INT_CTRL_RX0_CLR |
-+			MTK_WED_WPDMA_INT_CTRL_RX1_EN |
-+			MTK_WED_WPDMA_INT_CTRL_RX1_CLR |
-+			FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RX0_DONE_TRIG,
-+				   dev->wlan.rx_tbit[0]) |
-+			FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RX1_DONE_TRIG,
-+				   dev->wlan.rx_tbit[1]));
-+
- 		wed_w32(dev, MTK_WED_WDMA_INT_CLR, wdma_mask);
- 		wed_set(dev, MTK_WED_WDMA_INT_CTRL,
- 			FIELD_PREP(MTK_WED_WDMA_INT_CTRL_POLL_SRC_SEL,
-@@ -787,9 +1228,15 @@ mtk_wed_dma_enable(struct mtk_wed_device
- 		wdma_set(dev, MTK_WDMA_GLO_CFG,
- 			 MTK_WDMA_GLO_CFG_RX_INFO3_PRERES);
- 	} else {
-+		int i;
-+
- 		wed_set(dev, MTK_WED_WPDMA_CTRL,
- 			MTK_WED_WPDMA_CTRL_SDL1_FIXED);
- 
-+		wed_set(dev, MTK_WED_WDMA_GLO_CFG,
-+			MTK_WED_WDMA_GLO_CFG_TX_DRV_EN |
-+			MTK_WED_WDMA_GLO_CFG_TX_DDONE_CHK);
-+
- 		wed_set(dev, MTK_WED_WPDMA_GLO_CFG,
- 			MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_PKT_PROC |
- 			MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_CRX_SYNC);
-@@ -797,6 +1244,15 @@ mtk_wed_dma_enable(struct mtk_wed_device
- 		wed_clr(dev, MTK_WED_WPDMA_GLO_CFG,
- 			MTK_WED_WPDMA_GLO_CFG_TX_TKID_KEEP |
- 			MTK_WED_WPDMA_GLO_CFG_TX_DMAD_DW3_PREV);
-+
-+		wed_set(dev, MTK_WED_WPDMA_RX_D_GLO_CFG,
-+			MTK_WED_WPDMA_RX_D_RX_DRV_EN |
-+			FIELD_PREP(MTK_WED_WPDMA_RX_D_RXD_READ_LEN, 0x18) |
-+			FIELD_PREP(MTK_WED_WPDMA_RX_D_INIT_PHASE_RXEN_SEL,
-+				   0x2));
-+
-+		for (i = 0; i < MTK_WED_RX_QUEUES; i++)
-+			mtk_wed_check_wfdma_rx_fill(dev, i);
- 	}
- }
- 
-@@ -822,7 +1278,19 @@ mtk_wed_start(struct mtk_wed_device *dev
- 		val |= BIT(0) | (BIT(1) * !!dev->hw->index);
- 		regmap_write(dev->hw->mirror, dev->hw->index * 4, val);
- 	} else {
--		mtk_wed_set_512_support(dev, true);
-+		/* driver set mid ready and only once */
-+		wed_w32(dev, MTK_WED_EXT_INT_MASK1,
-+			MTK_WED_EXT_INT_STATUS_WPDMA_MID_RDY);
-+		wed_w32(dev, MTK_WED_EXT_INT_MASK2,
-+			MTK_WED_EXT_INT_STATUS_WPDMA_MID_RDY);
-+
-+		wed_r32(dev, MTK_WED_EXT_INT_MASK1);
-+		wed_r32(dev, MTK_WED_EXT_INT_MASK2);
-+
-+		if (mtk_wed_rro_cfg(dev))
-+			return;
-+
-+		mtk_wed_set_512_support(dev, dev->wlan.wcid_512);
- 	}
- 
- 	mtk_wed_dma_enable(dev);
-@@ -856,7 +1324,7 @@ mtk_wed_attach(struct mtk_wed_device *de
- 	if (!hw) {
- 		module_put(THIS_MODULE);
- 		ret = -ENODEV;
--		goto out;
-+		goto unlock;
- 	}
- 
- 	device = dev->wlan.bus_type == MTK_WED_BUS_PCIE
-@@ -869,15 +1337,24 @@ mtk_wed_attach(struct mtk_wed_device *de
- 	dev->dev = hw->dev;
- 	dev->irq = hw->irq;
- 	dev->wdma_idx = hw->index;
-+	dev->version = hw->version;
- 
- 	if (hw->eth->dma_dev == hw->eth->dev &&
- 	    of_dma_is_coherent(hw->eth->dev->of_node))
- 		mtk_eth_set_dma_device(hw->eth, hw->dev);
- 
--	ret = mtk_wed_buffer_alloc(dev);
--	if (ret) {
--		mtk_wed_detach(dev);
-+	ret = mtk_wed_tx_buffer_alloc(dev);
-+	if (ret)
- 		goto out;
-+
-+	if (mtk_wed_get_rx_capa(dev)) {
-+		ret = mtk_wed_rx_buffer_alloc(dev);
-+		if (ret)
-+			goto out;
-+
-+		ret = mtk_wed_rro_alloc(dev);
-+		if (ret)
-+			goto out;
- 	}
- 
- 	mtk_wed_hw_init_early(dev);
-@@ -886,8 +1363,10 @@ mtk_wed_attach(struct mtk_wed_device *de
- 				   BIT(hw->index), 0);
- 	else
- 		ret = mtk_wed_wo_init(hw);
--
- out:
-+	if (ret)
-+		mtk_wed_detach(dev);
-+unlock:
- 	mutex_unlock(&hw_lock);
- 
- 	return ret;
-@@ -910,10 +1389,11 @@ mtk_wed_tx_ring_setup(struct mtk_wed_dev
- 	 * WDMA RX.
- 	 */
- 
--	BUG_ON(idx >= ARRAY_SIZE(dev->tx_ring));
-+	if (WARN_ON(idx >= ARRAY_SIZE(dev->tx_ring)))
-+		return -EINVAL;
- 
- 	if (mtk_wed_ring_alloc(dev, ring, MTK_WED_TX_RING_SIZE,
--			       sizeof(*ring->desc)))
-+			       sizeof(*ring->desc), true))
- 		return -ENOMEM;
- 
- 	if (mtk_wed_wdma_rx_ring_setup(dev, idx, MTK_WED_WDMA_RING_SIZE))
-@@ -960,6 +1440,37 @@ mtk_wed_txfree_ring_setup(struct mtk_wed
- 	return 0;
- }
- 
-+static int
-+mtk_wed_rx_ring_setup(struct mtk_wed_device *dev, int idx, void __iomem *regs)
-+{
-+	struct mtk_wed_ring *ring = &dev->rx_ring[idx];
-+
-+	if (WARN_ON(idx >= ARRAY_SIZE(dev->rx_ring)))
-+		return -EINVAL;
-+
-+	if (mtk_wed_ring_alloc(dev, ring, MTK_WED_RX_RING_SIZE,
-+			       sizeof(*ring->desc), false))
-+		return -ENOMEM;
-+
-+	if (mtk_wed_wdma_tx_ring_setup(dev, idx, MTK_WED_WDMA_RING_SIZE))
-+		return -ENOMEM;
-+
-+	ring->reg_base = MTK_WED_RING_RX_DATA(idx);
-+	ring->wpdma = regs;
-+	ring->flags |= MTK_WED_RING_CONFIGURED;
-+
-+	/* WPDMA ->  WED */
-+	wpdma_rx_w32(dev, idx, MTK_WED_RING_OFS_BASE, ring->desc_phys);
-+	wpdma_rx_w32(dev, idx, MTK_WED_RING_OFS_COUNT, MTK_WED_RX_RING_SIZE);
-+
-+	wed_w32(dev, MTK_WED_WPDMA_RING_RX_DATA(idx) + MTK_WED_RING_OFS_BASE,
-+		ring->desc_phys);
-+	wed_w32(dev, MTK_WED_WPDMA_RING_RX_DATA(idx) + MTK_WED_RING_OFS_COUNT,
-+		MTK_WED_RX_RING_SIZE);
-+
-+	return 0;
-+}
-+
- static u32
- mtk_wed_irq_get(struct mtk_wed_device *dev, u32 mask)
- {
-@@ -1056,7 +1567,9 @@ void mtk_wed_add_hw(struct device_node *
- 	static const struct mtk_wed_ops wed_ops = {
- 		.attach = mtk_wed_attach,
- 		.tx_ring_setup = mtk_wed_tx_ring_setup,
-+		.rx_ring_setup = mtk_wed_rx_ring_setup,
- 		.txfree_ring_setup = mtk_wed_txfree_ring_setup,
-+		.msg_update = mtk_wed_mcu_msg_update,
- 		.start = mtk_wed_start,
- 		.stop = mtk_wed_stop,
- 		.reset_dma = mtk_wed_reset_dma,
-@@ -1065,6 +1578,7 @@ void mtk_wed_add_hw(struct device_node *
- 		.irq_get = mtk_wed_irq_get,
- 		.irq_set_mask = mtk_wed_irq_set_mask,
- 		.detach = mtk_wed_detach,
-+		.ppe_check = mtk_wed_ppe_check,
- 	};
- 	struct device_node *eth_np = eth->dev->of_node;
- 	struct platform_device *pdev;
---- a/drivers/net/ethernet/mediatek/mtk_wed.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.h
-@@ -87,6 +87,24 @@ wpdma_tx_w32(struct mtk_wed_device *dev,
- }
- 
- static inline u32
-+wpdma_rx_r32(struct mtk_wed_device *dev, int ring, u32 reg)
-+{
-+	if (!dev->rx_ring[ring].wpdma)
-+		return 0;
-+
-+	return readl(dev->rx_ring[ring].wpdma + reg);
-+}
-+
-+static inline void
-+wpdma_rx_w32(struct mtk_wed_device *dev, int ring, u32 reg, u32 val)
-+{
-+	if (!dev->rx_ring[ring].wpdma)
-+		return;
-+
-+	writel(val, dev->rx_ring[ring].wpdma + reg);
-+}
-+
-+static inline u32
- wpdma_txfree_r32(struct mtk_wed_device *dev, u32 reg)
- {
- 	if (!dev->txfree_ring.wpdma)
-@@ -128,6 +146,7 @@ static inline int mtk_wed_flow_add(int i
- static inline void mtk_wed_flow_remove(int index)
- {
- }
-+
- #endif
- 
- #ifdef CONFIG_DEBUG_FS
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -10,6 +10,7 @@
- #include <linux/of_reserved_mem.h>
- #include <linux/mfd/syscon.h>
- #include <linux/soc/mediatek/mtk_wed.h>
-+#include <asm/unaligned.h>
- 
- #include "mtk_wed_regs.h"
- #include "mtk_wed_wo.h"
-@@ -60,24 +61,37 @@ void mtk_wed_mcu_rx_event(struct mtk_wed
- 	wake_up(&wo->mcu.wait);
- }
- 
-+static void
-+mtk_wed_update_rx_stats(struct mtk_wed_device *wed, struct sk_buff *skb)
-+{
-+	u32 count = get_unaligned_le32(skb->data);
-+	struct mtk_wed_wo_rx_stats *stats;
-+	int i;
-+
-+	if (count * sizeof(*stats) > skb->len - sizeof(u32))
-+		return;
-+
-+	stats = (struct mtk_wed_wo_rx_stats *)(skb->data + sizeof(u32));
-+	for (i = 0 ; i < count ; i++)
-+		wed->wlan.update_wo_rx_stats(wed, &stats[i]);
-+}
-+
- void mtk_wed_mcu_rx_unsolicited_event(struct mtk_wed_wo *wo,
- 				      struct sk_buff *skb)
- {
- 	struct mtk_wed_mcu_hdr *hdr = (struct mtk_wed_mcu_hdr *)skb->data;
- 
--	switch (hdr->cmd) {
--	case MTK_WED_WO_EVT_LOG_DUMP: {
--		const char *msg = (const char *)(skb->data + sizeof(*hdr));
-+	skb_pull(skb, sizeof(*hdr));
- 
--		dev_notice(wo->hw->dev, "%s\n", msg);
-+	switch (hdr->cmd) {
-+	case MTK_WED_WO_EVT_LOG_DUMP:
-+		dev_notice(wo->hw->dev, "%s\n", skb->data);
- 		break;
--	}
- 	case MTK_WED_WO_EVT_PROFILING: {
--		struct mtk_wed_wo_log_info *info;
--		u32 count = (skb->len - sizeof(*hdr)) / sizeof(*info);
-+		struct mtk_wed_wo_log_info *info = (void *)skb->data;
-+		u32 count = skb->len / sizeof(*info);
- 		int i;
- 
--		info = (struct mtk_wed_wo_log_info *)(skb->data + sizeof(*hdr));
- 		for (i = 0 ; i < count ; i++)
- 			dev_notice(wo->hw->dev,
- 				   "SN:%u latency: total=%u, rro:%u, mod:%u\n",
-@@ -88,6 +102,7 @@ void mtk_wed_mcu_rx_unsolicited_event(st
- 		break;
- 	}
- 	case MTK_WED_WO_EVT_RXCNT_INFO:
-+		mtk_wed_update_rx_stats(wo->hw->wed_dev, skb);
- 		break;
- 	default:
- 		break;
-@@ -144,6 +159,8 @@ mtk_wed_mcu_parse_response(struct mtk_we
- 	skb_pull(skb, sizeof(*hdr));
- 	switch (cmd) {
- 	case MTK_WED_WO_CMD_RXCNT_INFO:
-+		mtk_wed_update_rx_stats(wo->hw->wed_dev, skb);
-+		break;
- 	default:
- 		break;
- 	}
-@@ -182,6 +199,18 @@ unlock:
- 	return ret;
- }
- 
-+int mtk_wed_mcu_msg_update(struct mtk_wed_device *dev, int id, void *data,
-+			   int len)
-+{
-+	struct mtk_wed_wo *wo = dev->hw->wed_wo;
-+
-+	if (dev->hw->version == 1)
-+		return 0;
-+
-+	return mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO, id, data, len,
-+				    true);
-+}
-+
- static int
- mtk_wed_get_memory_region(struct mtk_wed_wo *wo,
- 			  struct mtk_wed_wo_memory_region *region)
---- a/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -4,6 +4,7 @@
- #ifndef __MTK_WED_REGS_H
- #define __MTK_WED_REGS_H
- 
-+#define MTK_WFDMA_DESC_CTRL_TO_HOST		BIT(8)
- #define MTK_WDMA_DESC_CTRL_LEN1			GENMASK(14, 0)
- #define MTK_WDMA_DESC_CTRL_LEN1_V2		GENMASK(13, 0)
- #define MTK_WDMA_DESC_CTRL_LAST_SEG1		BIT(15)
-@@ -28,6 +29,8 @@ struct mtk_wdma_desc {
- #define MTK_WED_RESET_WED_TX_DMA			BIT(12)
- #define MTK_WED_RESET_WDMA_RX_DRV			BIT(17)
- #define MTK_WED_RESET_WDMA_INT_AGENT			BIT(19)
-+#define MTK_WED_RESET_RX_RRO_QM				BIT(20)
-+#define MTK_WED_RESET_RX_ROUTE_QM			BIT(21)
- #define MTK_WED_RESET_WED				BIT(31)
- 
- #define MTK_WED_CTRL					0x00c
-@@ -39,8 +42,12 @@ struct mtk_wdma_desc {
- #define MTK_WED_CTRL_WED_TX_BM_BUSY			BIT(9)
- #define MTK_WED_CTRL_WED_TX_FREE_AGENT_EN		BIT(10)
- #define MTK_WED_CTRL_WED_TX_FREE_AGENT_BUSY		BIT(11)
--#define MTK_WED_CTRL_RESERVE_EN				BIT(12)
--#define MTK_WED_CTRL_RESERVE_BUSY			BIT(13)
-+#define MTK_WED_CTRL_WED_RX_BM_EN			BIT(12)
-+#define MTK_WED_CTRL_WED_RX_BM_BUSY			BIT(13)
-+#define MTK_WED_CTRL_RX_RRO_QM_EN			BIT(14)
-+#define MTK_WED_CTRL_RX_RRO_QM_BUSY			BIT(15)
-+#define MTK_WED_CTRL_RX_ROUTE_QM_EN			BIT(16)
-+#define MTK_WED_CTRL_RX_ROUTE_QM_BUSY			BIT(17)
- #define MTK_WED_CTRL_FINAL_DIDX_READ			BIT(24)
- #define MTK_WED_CTRL_ETH_DMAD_FMT			BIT(25)
- #define MTK_WED_CTRL_MIB_READ_CLEAR			BIT(28)
-@@ -62,6 +69,9 @@ struct mtk_wdma_desc {
- #define MTK_WED_EXT_INT_STATUS_TX_DMA_R_RESP_ERR	BIT(22)
- #define MTK_WED_EXT_INT_STATUS_TX_DMA_W_RESP_ERR	BIT(23)
- #define MTK_WED_EXT_INT_STATUS_RX_DRV_DMA_RECYCLE	BIT(24)
-+#define MTK_WED_EXT_INT_STATUS_RX_DRV_GET_BM_DMAD_SKIP	BIT(25)
-+#define MTK_WED_EXT_INT_STATUS_WPDMA_RX_D_DRV_ERR	BIT(26)
-+#define MTK_WED_EXT_INT_STATUS_WPDMA_MID_RDY		BIT(27)
- #define MTK_WED_EXT_INT_STATUS_ERROR_MASK		(MTK_WED_EXT_INT_STATUS_TF_LEN_ERR | \
- 							 MTK_WED_EXT_INT_STATUS_TKID_WO_PYLD | \
- 							 MTK_WED_EXT_INT_STATUS_TKID_TITO_INVALID | \
-@@ -71,6 +81,8 @@ struct mtk_wdma_desc {
- 							 MTK_WED_EXT_INT_STATUS_TX_DMA_R_RESP_ERR)
- 
- #define MTK_WED_EXT_INT_MASK				0x028
-+#define MTK_WED_EXT_INT_MASK1				0x02c
-+#define MTK_WED_EXT_INT_MASK2				0x030
- 
- #define MTK_WED_STATUS					0x060
- #define MTK_WED_STATUS_TX				GENMASK(15, 8)
-@@ -151,6 +163,7 @@ struct mtk_wdma_desc {
- #define MTK_WED_RING_TX(_n)				(0x300 + (_n) * 0x10)
- 
- #define MTK_WED_RING_RX(_n)				(0x400 + (_n) * 0x10)
-+#define MTK_WED_RING_RX_DATA(_n)			(0x420 + (_n) * 0x10)
- 
- #define MTK_WED_SCR0					0x3c0
- #define MTK_WED_WPDMA_INT_TRIGGER			0x504
-@@ -213,6 +226,12 @@ struct mtk_wdma_desc {
- #define MTK_WED_WPDMA_INT_CTRL_TX1_DONE_TRIG		GENMASK(14, 10)
- 
- #define MTK_WED_WPDMA_INT_CTRL_RX			0x534
-+#define MTK_WED_WPDMA_INT_CTRL_RX0_EN			BIT(0)
-+#define MTK_WED_WPDMA_INT_CTRL_RX0_CLR			BIT(1)
-+#define MTK_WED_WPDMA_INT_CTRL_RX0_DONE_TRIG		GENMASK(6, 2)
-+#define MTK_WED_WPDMA_INT_CTRL_RX1_EN			BIT(8)
-+#define MTK_WED_WPDMA_INT_CTRL_RX1_CLR			BIT(9)
-+#define MTK_WED_WPDMA_INT_CTRL_RX1_DONE_TRIG		GENMASK(14, 10)
- 
- #define MTK_WED_WPDMA_INT_CTRL_TX_FREE			0x538
- #define MTK_WED_WPDMA_INT_CTRL_TX_FREE_DONE_EN		BIT(0)
-@@ -242,11 +261,34 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_WPDMA_RING_TX(_n)			(0x600 + (_n) * 0x10)
- #define MTK_WED_WPDMA_RING_RX(_n)			(0x700 + (_n) * 0x10)
-+#define MTK_WED_WPDMA_RING_RX_DATA(_n)			(0x730 + (_n) * 0x10)
-+
-+#define MTK_WED_WPDMA_RX_D_GLO_CFG			0x75c
-+#define MTK_WED_WPDMA_RX_D_RX_DRV_EN			BIT(0)
-+#define MTK_WED_WPDMA_RX_D_INIT_PHASE_RXEN_SEL		GENMASK(11, 7)
-+#define MTK_WED_WPDMA_RX_D_RXD_READ_LEN			GENMASK(31, 24)
-+
-+#define MTK_WED_WPDMA_RX_D_RST_IDX			0x760
-+#define MTK_WED_WPDMA_RX_D_RST_CRX_IDX			GENMASK(17, 16)
-+#define MTK_WED_WPDMA_RX_D_RST_DRV_IDX			GENMASK(25, 24)
-+
-+#define MTK_WED_WPDMA_RX_GLO_CFG			0x76c
-+#define MTK_WED_WPDMA_RX_RING				0x770
-+
-+#define MTK_WED_WPDMA_RX_D_MIB(_n)			(0x774 + (_n) * 4)
-+#define MTK_WED_WPDMA_RX_D_PROCESSED_MIB(_n)		(0x784 + (_n) * 4)
-+#define MTK_WED_WPDMA_RX_D_COHERENT_MIB			0x78c
-+
-+#define MTK_WED_WDMA_RING_TX				0x800
-+
-+#define MTK_WED_WDMA_TX_MIB				0x810
-+
- #define MTK_WED_WDMA_RING_RX(_n)			(0x900 + (_n) * 0x10)
- #define MTK_WED_WDMA_RX_THRES(_n)			(0x940 + (_n) * 0x4)
- 
- #define MTK_WED_WDMA_GLO_CFG				0xa04
- #define MTK_WED_WDMA_GLO_CFG_TX_DRV_EN			BIT(0)
-+#define MTK_WED_WDMA_GLO_CFG_TX_DDONE_CHK		BIT(1)
- #define MTK_WED_WDMA_GLO_CFG_RX_DRV_EN			BIT(2)
- #define MTK_WED_WDMA_GLO_CFG_RX_DRV_BUSY		BIT(3)
- #define MTK_WED_WDMA_GLO_CFG_BT_SIZE			GENMASK(5, 4)
-@@ -291,6 +333,20 @@ struct mtk_wdma_desc {
- #define MTK_WED_WDMA_RX_RECYCLE_MIB(_n)			(0xae8 + (_n) * 4)
- #define MTK_WED_WDMA_RX_PROCESSED_MIB(_n)		(0xaf0 + (_n) * 4)
- 
-+#define MTK_WED_RX_BM_RX_DMAD				0xd80
-+#define MTK_WED_RX_BM_RX_DMAD_SDL0			GENMASK(13, 0)
-+
-+#define MTK_WED_RX_BM_BASE				0xd84
-+#define MTK_WED_RX_BM_INIT_PTR				0xd88
-+#define MTK_WED_RX_BM_SW_TAIL				GENMASK(15, 0)
-+#define MTK_WED_RX_BM_INIT_SW_TAIL			BIT(16)
-+
-+#define MTK_WED_RX_PTR					0xd8c
-+
-+#define MTK_WED_RX_BM_DYN_ALLOC_TH			0xdb4
-+#define MTK_WED_RX_BM_DYN_ALLOC_TH_H			GENMASK(31, 16)
-+#define MTK_WED_RX_BM_DYN_ALLOC_TH_L			GENMASK(15, 0)
-+
- #define MTK_WED_RING_OFS_BASE				0x00
- #define MTK_WED_RING_OFS_COUNT				0x04
- #define MTK_WED_RING_OFS_CPU_IDX			0x08
-@@ -301,7 +357,9 @@ struct mtk_wdma_desc {
- 
- #define MTK_WDMA_GLO_CFG				0x204
- #define MTK_WDMA_GLO_CFG_TX_DMA_EN			BIT(0)
-+#define MTK_WDMA_GLO_CFG_TX_DMA_BUSY			BIT(1)
- #define MTK_WDMA_GLO_CFG_RX_DMA_EN			BIT(2)
-+#define MTK_WDMA_GLO_CFG_RX_DMA_BUSY			BIT(3)
- #define MTK_WDMA_GLO_CFG_RX_INFO3_PRERES		BIT(26)
- #define MTK_WDMA_GLO_CFG_RX_INFO2_PRERES		BIT(27)
- #define MTK_WDMA_GLO_CFG_RX_INFO1_PRERES		BIT(28)
-@@ -330,4 +388,70 @@ struct mtk_wdma_desc {
- /* DMA channel mapping */
- #define HIFSYS_DMA_AG_MAP				0x008
- 
-+#define MTK_WED_RTQM_GLO_CFG				0xb00
-+#define MTK_WED_RTQM_BUSY				BIT(1)
-+#define MTK_WED_RTQM_Q_RST				BIT(2)
-+#define MTK_WED_RTQM_Q_DBG_BYPASS			BIT(5)
-+#define MTK_WED_RTQM_TXDMAD_FPORT			GENMASK(23, 20)
-+
-+#define MTK_WED_RTQM_R2H_MIB(_n)			(0xb70 + (_n) * 0x4)
-+#define MTK_WED_RTQM_R2Q_MIB(_n)			(0xb78 + (_n) * 0x4)
-+#define MTK_WED_RTQM_Q2N_MIB				0xb80
-+#define MTK_WED_RTQM_Q2H_MIB(_n)			(0xb84 + (_n) * 0x4)
-+
-+#define MTK_WED_RTQM_Q2B_MIB				0xb8c
-+#define MTK_WED_RTQM_PFDBK_MIB				0xb90
-+
-+#define MTK_WED_RROQM_GLO_CFG				0xc04
-+#define MTK_WED_RROQM_RST_IDX				0xc08
-+#define MTK_WED_RROQM_RST_IDX_MIOD			BIT(0)
-+#define MTK_WED_RROQM_RST_IDX_FDBK			BIT(4)
-+
-+#define MTK_WED_RROQM_MIOD_CTRL0			0xc40
-+#define MTK_WED_RROQM_MIOD_CTRL1			0xc44
-+#define MTK_WED_RROQM_MIOD_CNT				GENMASK(11, 0)
-+
-+#define MTK_WED_RROQM_MIOD_CTRL2			0xc48
-+#define MTK_WED_RROQM_MIOD_CTRL3			0xc4c
-+
-+#define MTK_WED_RROQM_FDBK_CTRL0			0xc50
-+#define MTK_WED_RROQM_FDBK_CTRL1			0xc54
-+#define MTK_WED_RROQM_FDBK_CNT				GENMASK(11, 0)
-+
-+#define MTK_WED_RROQM_FDBK_CTRL2			0xc58
-+
-+#define MTK_WED_RROQ_BASE_L				0xc80
-+#define MTK_WED_RROQ_BASE_H				0xc84
-+
-+#define MTK_WED_RROQM_MIOD_CFG				0xc8c
-+#define MTK_WED_RROQM_MIOD_MID_DW			GENMASK(5, 0)
-+#define MTK_WED_RROQM_MIOD_MOD_DW			GENMASK(13, 8)
-+#define MTK_WED_RROQM_MIOD_ENTRY_DW			GENMASK(22, 16)
-+
-+#define MTK_WED_RROQM_MID_MIB				0xcc0
-+#define MTK_WED_RROQM_MOD_MIB				0xcc4
-+#define MTK_WED_RROQM_MOD_COHERENT_MIB			0xcc8
-+#define MTK_WED_RROQM_FDBK_MIB				0xcd0
-+#define MTK_WED_RROQM_FDBK_COHERENT_MIB			0xcd4
-+#define MTK_WED_RROQM_FDBK_IND_MIB			0xce0
-+#define MTK_WED_RROQM_FDBK_ENQ_MIB			0xce4
-+#define MTK_WED_RROQM_FDBK_ANC_MIB			0xce8
-+#define MTK_WED_RROQM_FDBK_ANC2H_MIB			0xcec
-+
-+#define MTK_WED_RX_BM_RX_DMAD				0xd80
-+#define MTK_WED_RX_BM_BASE				0xd84
-+#define MTK_WED_RX_BM_INIT_PTR				0xd88
-+#define MTK_WED_RX_BM_PTR				0xd8c
-+#define MTK_WED_RX_BM_PTR_HEAD				GENMASK(32, 16)
-+#define MTK_WED_RX_BM_PTR_TAIL				GENMASK(15, 0)
-+
-+#define MTK_WED_RX_BM_BLEN				0xd90
-+#define MTK_WED_RX_BM_STS				0xd94
-+#define MTK_WED_RX_BM_INTF2				0xd98
-+#define MTK_WED_RX_BM_INTF				0xd9c
-+#define MTK_WED_RX_BM_ERR_STS				0xda8
-+
-+#define MTK_WED_WOCPU_VIEW_MIOD_BASE			0x8000
-+#define MTK_WED_PCIE_INT_MASK				0x0
-+
- #endif
---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-@@ -49,6 +49,10 @@ enum {
- 	MTK_WED_WARP_CMD_FLAG_FROM_TO_WO	= BIT(2),
- };
- 
-+#define MTK_WED_WO_CPU_MCUSYS_RESET_ADDR	0x15194050
-+#define MTK_WED_WO_CPU_WO0_MCUSYS_RESET_MASK	0x20
-+#define MTK_WED_WO_CPU_WO1_MCUSYS_RESET_MASK	0x1
-+
- enum {
- 	MTK_WED_WO_REGION_EMI,
- 	MTK_WED_WO_REGION_ILM,
-@@ -57,6 +61,28 @@ enum {
- 	__MTK_WED_WO_REGION_MAX,
- };
- 
-+enum mtk_wed_wo_state {
-+	MTK_WED_WO_STATE_UNDEFINED,
-+	MTK_WED_WO_STATE_INIT,
-+	MTK_WED_WO_STATE_ENABLE,
-+	MTK_WED_WO_STATE_DISABLE,
-+	MTK_WED_WO_STATE_HALT,
-+	MTK_WED_WO_STATE_GATING,
-+	MTK_WED_WO_STATE_SER_RESET,
-+	MTK_WED_WO_STATE_WF_RESET,
-+};
-+
-+enum mtk_wed_wo_done_state {
-+	MTK_WED_WOIF_UNDEFINED,
-+	MTK_WED_WOIF_DISABLE_DONE,
-+	MTK_WED_WOIF_TRIGGER_ENABLE,
-+	MTK_WED_WOIF_ENABLE_DONE,
-+	MTK_WED_WOIF_TRIGGER_GATING,
-+	MTK_WED_WOIF_GATING_DONE,
-+	MTK_WED_WOIF_TRIGGER_HALT,
-+	MTK_WED_WOIF_HALT_DONE,
-+};
-+
- enum mtk_wed_dummy_cr_idx {
- 	MTK_WED_DUMMY_CR_FWDL,
- 	MTK_WED_DUMMY_CR_WO_STATUS,
-@@ -245,6 +271,8 @@ void mtk_wed_mcu_rx_unsolicited_event(st
- 				      struct sk_buff *skb);
- int mtk_wed_mcu_send_msg(struct mtk_wed_wo *wo, int id, int cmd,
- 			 const void *data, int len, bool wait_resp);
-+int mtk_wed_mcu_msg_update(struct mtk_wed_device *dev, int id, void *data,
-+			   int len);
- int mtk_wed_mcu_init(struct mtk_wed_wo *wo);
- int mtk_wed_wo_init(struct mtk_wed_hw *hw);
- void mtk_wed_wo_deinit(struct mtk_wed_hw *hw);
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -5,10 +5,13 @@
- #include <linux/rcupdate.h>
- #include <linux/regmap.h>
- #include <linux/pci.h>
-+#include <linux/skbuff.h>
- 
- #define MTK_WED_TX_QUEUES		2
- #define MTK_WED_RX_QUEUES		2
- 
-+#define WED_WO_STA_REC			0x6
-+
- struct mtk_wed_hw;
- struct mtk_wdma_desc;
- 
-@@ -41,21 +44,37 @@ enum mtk_wed_wo_cmd {
- 	MTK_WED_WO_CMD_WED_END
- };
- 
-+struct mtk_rxbm_desc {
-+	__le32 buf0;
-+	__le32 token;
-+} __packed __aligned(4);
-+
- enum mtk_wed_bus_tye {
- 	MTK_WED_BUS_PCIE,
- 	MTK_WED_BUS_AXI,
- };
- 
-+#define MTK_WED_RING_CONFIGURED		BIT(0)
- struct mtk_wed_ring {
- 	struct mtk_wdma_desc *desc;
- 	dma_addr_t desc_phys;
- 	u32 desc_size;
- 	int size;
-+	u32 flags;
- 
- 	u32 reg_base;
- 	void __iomem *wpdma;
- };
- 
-+struct mtk_wed_wo_rx_stats {
-+	__le16 wlan_idx;
-+	__le16 tid;
-+	__le32 rx_pkt_cnt;
-+	__le32 rx_byte_cnt;
-+	__le32 rx_err_cnt;
-+	__le32 rx_drop_cnt;
-+};
-+
- struct mtk_wed_device {
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
- 	const struct mtk_wed_ops *ops;
-@@ -64,9 +83,12 @@ struct mtk_wed_device {
- 	bool init_done, running;
- 	int wdma_idx;
- 	int irq;
-+	u8 version;
- 
- 	struct mtk_wed_ring tx_ring[MTK_WED_TX_QUEUES];
-+	struct mtk_wed_ring rx_ring[MTK_WED_RX_QUEUES];
- 	struct mtk_wed_ring txfree_ring;
-+	struct mtk_wed_ring tx_wdma[MTK_WED_TX_QUEUES];
- 	struct mtk_wed_ring rx_wdma[MTK_WED_RX_QUEUES];
- 
- 	struct {
-@@ -74,7 +96,20 @@ struct mtk_wed_device {
- 		void **pages;
- 		struct mtk_wdma_desc *desc;
- 		dma_addr_t desc_phys;
--	} buf_ring;
-+	} tx_buf_ring;
-+
-+	struct {
-+		int size;
-+		struct page_frag_cache rx_page;
-+		struct mtk_rxbm_desc *desc;
-+		dma_addr_t desc_phys;
-+	} rx_buf_ring;
-+
-+	struct {
-+		struct mtk_wed_ring ring;
-+		dma_addr_t miod_phys;
-+		dma_addr_t fdbk_phys;
-+	} rro;
- 
- 	/* filled by driver: */
- 	struct {
-@@ -83,22 +118,36 @@ struct mtk_wed_device {
- 			struct pci_dev *pci_dev;
- 		};
- 		enum mtk_wed_bus_tye bus_type;
-+		void __iomem *base;
-+		u32 phy_base;
- 
- 		u32 wpdma_phys;
- 		u32 wpdma_int;
- 		u32 wpdma_mask;
- 		u32 wpdma_tx;
- 		u32 wpdma_txfree;
-+		u32 wpdma_rx_glo;
-+		u32 wpdma_rx;
-+
-+		bool wcid_512;
- 
- 		u16 token_start;
- 		unsigned int nbuf;
-+		unsigned int rx_nbuf;
-+		unsigned int rx_npkt;
-+		unsigned int rx_size;
- 
- 		u8 tx_tbit[MTK_WED_TX_QUEUES];
-+		u8 rx_tbit[MTK_WED_RX_QUEUES];
- 		u8 txfree_tbit;
- 
- 		u32 (*init_buf)(void *ptr, dma_addr_t phys, int token_id);
- 		int (*offload_enable)(struct mtk_wed_device *wed);
- 		void (*offload_disable)(struct mtk_wed_device *wed);
-+		u32 (*init_rx_buf)(struct mtk_wed_device *wed, int size);
-+		void (*release_rx_buf)(struct mtk_wed_device *wed);
-+		void (*update_wo_rx_stats)(struct mtk_wed_device *wed,
-+					   struct mtk_wed_wo_rx_stats *stats);
- 	} wlan;
- #endif
- };
-@@ -107,9 +156,15 @@ struct mtk_wed_ops {
- 	int (*attach)(struct mtk_wed_device *dev);
- 	int (*tx_ring_setup)(struct mtk_wed_device *dev, int ring,
- 			     void __iomem *regs);
-+	int (*rx_ring_setup)(struct mtk_wed_device *dev, int ring,
-+			     void __iomem *regs);
- 	int (*txfree_ring_setup)(struct mtk_wed_device *dev,
- 				 void __iomem *regs);
-+	int (*msg_update)(struct mtk_wed_device *dev, int cmd_id,
-+			  void *data, int len);
- 	void (*detach)(struct mtk_wed_device *dev);
-+	void (*ppe_check)(struct mtk_wed_device *dev, struct sk_buff *skb,
-+			  u32 reason, u32 hash);
- 
- 	void (*stop)(struct mtk_wed_device *dev);
- 	void (*start)(struct mtk_wed_device *dev, u32 irq_mask);
-@@ -144,6 +199,16 @@ mtk_wed_device_attach(struct mtk_wed_dev
- 	return ret;
- }
- 
-+static inline bool
-+mtk_wed_get_rx_capa(struct mtk_wed_device *dev)
-+{
-+#ifdef CONFIG_NET_MEDIATEK_SOC_WED
-+	return dev->version != 1;
-+#else
-+	return false;
-+#endif
-+}
-+
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
- #define mtk_wed_device_active(_dev) !!(_dev)->ops
- #define mtk_wed_device_detach(_dev) (_dev)->ops->detach(_dev)
-@@ -160,6 +225,12 @@ mtk_wed_device_attach(struct mtk_wed_dev
- 	(_dev)->ops->irq_get(_dev, _mask)
- #define mtk_wed_device_irq_set_mask(_dev, _mask) \
- 	(_dev)->ops->irq_set_mask(_dev, _mask)
-+#define mtk_wed_device_rx_ring_setup(_dev, _ring, _regs) \
-+	(_dev)->ops->rx_ring_setup(_dev, _ring, _regs)
-+#define mtk_wed_device_ppe_check(_dev, _skb, _reason, _hash) \
-+	(_dev)->ops->ppe_check(_dev, _skb, _reason, _hash)
-+#define mtk_wed_device_update_msg(_dev, _id, _msg, _len) \
-+	(_dev)->ops->msg_update(_dev, _id, _msg, _len)
- #else
- static inline bool mtk_wed_device_active(struct mtk_wed_device *dev)
- {
-@@ -173,6 +244,9 @@ static inline bool mtk_wed_device_active
- #define mtk_wed_device_reg_write(_dev, _reg, _val) do {} while (0)
- #define mtk_wed_device_irq_get(_dev, _mask) 0
- #define mtk_wed_device_irq_set_mask(_dev, _mask) do {} while (0)
-+#define mtk_wed_device_rx_ring_setup(_dev, _ring, _regs) -ENODEV
-+#define mtk_wed_device_ppe_check(_dev, _skb, _reason, _hash)  do {} while (0)
-+#define mtk_wed_device_update_msg(_dev, _id, _msg, _len) -ENODEV
- #endif
- 
- #endif
diff --git a/target/linux/generic/backport-6.1/729-05-v6.1-net-ethernet-mtk_wed-add-rx-mib-counters.patch b/target/linux/generic/backport-6.1/729-05-v6.1-net-ethernet-mtk_wed-add-rx-mib-counters.patch
deleted file mode 100644
index bb1066deceaa..000000000000
--- a/target/linux/generic/backport-6.1/729-05-v6.1-net-ethernet-mtk_wed-add-rx-mib-counters.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 5 Nov 2022 23:36:22 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: add rx mib counters
-
-Introduce WED RX MIB counters support available on MT7986a SoC.
-
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-@@ -2,6 +2,7 @@
- /* Copyright (C) 2021 Felix Fietkau <nbd@nbd.name> */
- 
- #include <linux/seq_file.h>
-+#include <linux/soc/mediatek/mtk_wed.h>
- #include "mtk_wed.h"
- #include "mtk_wed_regs.h"
- 
-@@ -18,6 +19,8 @@ enum {
- 	DUMP_TYPE_WDMA,
- 	DUMP_TYPE_WPDMA_TX,
- 	DUMP_TYPE_WPDMA_TXFREE,
-+	DUMP_TYPE_WPDMA_RX,
-+	DUMP_TYPE_WED_RRO,
- };
- 
- #define DUMP_STR(_str) { _str, 0, DUMP_TYPE_STRING }
-@@ -36,6 +39,9 @@ enum {
- 
- #define DUMP_WPDMA_TX_RING(_n) DUMP_RING("WPDMA_TX" #_n, 0, DUMP_TYPE_WPDMA_TX, _n)
- #define DUMP_WPDMA_TXFREE_RING DUMP_RING("WPDMA_RX1", 0, DUMP_TYPE_WPDMA_TXFREE)
-+#define DUMP_WPDMA_RX_RING(_n)	DUMP_RING("WPDMA_RX" #_n, 0, DUMP_TYPE_WPDMA_RX, _n)
-+#define DUMP_WED_RRO_RING(_base)DUMP_RING("WED_RRO_MIOD", MTK_##_base, DUMP_TYPE_WED_RRO)
-+#define DUMP_WED_RRO_FDBK(_base)DUMP_RING("WED_RRO_FDBK", MTK_##_base, DUMP_TYPE_WED_RRO)
- 
- static void
- print_reg_val(struct seq_file *s, const char *name, u32 val)
-@@ -57,6 +63,7 @@ dump_wed_regs(struct seq_file *s, struct
- 				   cur > regs ? "\n" : "",
- 				   cur->name);
- 			continue;
-+		case DUMP_TYPE_WED_RRO:
- 		case DUMP_TYPE_WED:
- 			val = wed_r32(dev, cur->offset);
- 			break;
-@@ -69,6 +76,9 @@ dump_wed_regs(struct seq_file *s, struct
- 		case DUMP_TYPE_WPDMA_TXFREE:
- 			val = wpdma_txfree_r32(dev, cur->offset);
- 			break;
-+		case DUMP_TYPE_WPDMA_RX:
-+			val = wpdma_rx_r32(dev, cur->base, cur->offset);
-+			break;
- 		}
- 		print_reg_val(s, cur->name, val);
- 	}
-@@ -132,6 +142,80 @@ wed_txinfo_show(struct seq_file *s, void
- }
- DEFINE_SHOW_ATTRIBUTE(wed_txinfo);
- 
-+static int
-+wed_rxinfo_show(struct seq_file *s, void *data)
-+{
-+	static const struct reg_dump regs[] = {
-+		DUMP_STR("WPDMA RX"),
-+		DUMP_WPDMA_RX_RING(0),
-+		DUMP_WPDMA_RX_RING(1),
-+
-+		DUMP_STR("WPDMA RX"),
-+		DUMP_WED(WED_WPDMA_RX_D_MIB(0)),
-+		DUMP_WED_RING(WED_WPDMA_RING_RX_DATA(0)),
-+		DUMP_WED(WED_WPDMA_RX_D_PROCESSED_MIB(0)),
-+		DUMP_WED(WED_WPDMA_RX_D_MIB(1)),
-+		DUMP_WED_RING(WED_WPDMA_RING_RX_DATA(1)),
-+		DUMP_WED(WED_WPDMA_RX_D_PROCESSED_MIB(1)),
-+		DUMP_WED(WED_WPDMA_RX_D_COHERENT_MIB),
-+
-+		DUMP_STR("WED RX"),
-+		DUMP_WED_RING(WED_RING_RX_DATA(0)),
-+		DUMP_WED_RING(WED_RING_RX_DATA(1)),
-+
-+		DUMP_STR("WED RRO"),
-+		DUMP_WED_RRO_RING(WED_RROQM_MIOD_CTRL0),
-+		DUMP_WED(WED_RROQM_MID_MIB),
-+		DUMP_WED(WED_RROQM_MOD_MIB),
-+		DUMP_WED(WED_RROQM_MOD_COHERENT_MIB),
-+		DUMP_WED_RRO_FDBK(WED_RROQM_FDBK_CTRL0),
-+		DUMP_WED(WED_RROQM_FDBK_IND_MIB),
-+		DUMP_WED(WED_RROQM_FDBK_ENQ_MIB),
-+		DUMP_WED(WED_RROQM_FDBK_ANC_MIB),
-+		DUMP_WED(WED_RROQM_FDBK_ANC2H_MIB),
-+
-+		DUMP_STR("WED Route QM"),
-+		DUMP_WED(WED_RTQM_R2H_MIB(0)),
-+		DUMP_WED(WED_RTQM_R2Q_MIB(0)),
-+		DUMP_WED(WED_RTQM_Q2H_MIB(0)),
-+		DUMP_WED(WED_RTQM_R2H_MIB(1)),
-+		DUMP_WED(WED_RTQM_R2Q_MIB(1)),
-+		DUMP_WED(WED_RTQM_Q2H_MIB(1)),
-+		DUMP_WED(WED_RTQM_Q2N_MIB),
-+		DUMP_WED(WED_RTQM_Q2B_MIB),
-+		DUMP_WED(WED_RTQM_PFDBK_MIB),
-+
-+		DUMP_STR("WED WDMA TX"),
-+		DUMP_WED(WED_WDMA_TX_MIB),
-+		DUMP_WED_RING(WED_WDMA_RING_TX),
-+
-+		DUMP_STR("WDMA TX"),
-+		DUMP_WDMA(WDMA_GLO_CFG),
-+		DUMP_WDMA_RING(WDMA_RING_TX(0)),
-+		DUMP_WDMA_RING(WDMA_RING_TX(1)),
-+
-+		DUMP_STR("WED RX BM"),
-+		DUMP_WED(WED_RX_BM_BASE),
-+		DUMP_WED(WED_RX_BM_RX_DMAD),
-+		DUMP_WED(WED_RX_BM_PTR),
-+		DUMP_WED(WED_RX_BM_TKID_MIB),
-+		DUMP_WED(WED_RX_BM_BLEN),
-+		DUMP_WED(WED_RX_BM_STS),
-+		DUMP_WED(WED_RX_BM_INTF2),
-+		DUMP_WED(WED_RX_BM_INTF),
-+		DUMP_WED(WED_RX_BM_ERR_STS),
-+	};
-+	struct mtk_wed_hw *hw = s->private;
-+	struct mtk_wed_device *dev = hw->wed_dev;
-+
-+	if (!dev)
-+		return 0;
-+
-+	dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
-+
-+	return 0;
-+}
-+DEFINE_SHOW_ATTRIBUTE(wed_rxinfo);
- 
- static int
- mtk_wed_reg_set(void *data, u64 val)
-@@ -175,4 +259,7 @@ void mtk_wed_hw_add_debugfs(struct mtk_w
- 	debugfs_create_u32("regidx", 0600, dir, &hw->debugfs_reg);
- 	debugfs_create_file_unsafe("regval", 0600, dir, hw, &fops_regval);
- 	debugfs_create_file_unsafe("txinfo", 0400, dir, hw, &wed_txinfo_fops);
-+	if (hw->version != 1)
-+		debugfs_create_file_unsafe("rxinfo", 0400, dir, hw,
-+					   &wed_rxinfo_fops);
- }
diff --git a/target/linux/generic/backport-6.1/729-07-v6.1-net-ethernet-mtk_eth_soc-remove-cpu_relax-in-mtk_pen.patch b/target/linux/generic/backport-6.1/729-07-v6.1-net-ethernet-mtk_eth_soc-remove-cpu_relax-in-mtk_pen.patch
deleted file mode 100644
index 5a79242e3bb8..000000000000
--- a/target/linux/generic/backport-6.1/729-07-v6.1-net-ethernet-mtk_eth_soc-remove-cpu_relax-in-mtk_pen.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 17 Nov 2022 00:58:46 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: remove cpu_relax in
- mtk_pending_work
-
-Get rid of cpu_relax in mtk_pending_work routine since MTK_RESETTING is
-set only in mtk_pending_work() and it runs holding rtnl lock
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -3479,11 +3479,8 @@ static void mtk_pending_work(struct work
- 	rtnl_lock();
- 
- 	dev_dbg(eth->dev, "[%s][%d] reset\n", __func__, __LINE__);
-+	set_bit(MTK_RESETTING, &eth->state);
- 
--	while (test_and_set_bit_lock(MTK_RESETTING, &eth->state))
--		cpu_relax();
--
--	dev_dbg(eth->dev, "[%s][%d] mtk_stop starts\n", __func__, __LINE__);
- 	/* stop all devices to make sure that dma is properly shut down */
- 	for (i = 0; i < MTK_MAC_COUNT; i++) {
- 		if (!eth->netdev[i])
-@@ -3517,7 +3514,7 @@ static void mtk_pending_work(struct work
- 
- 	dev_dbg(eth->dev, "[%s][%d] reset done\n", __func__, __LINE__);
- 
--	clear_bit_unlock(MTK_RESETTING, &eth->state);
-+	clear_bit(MTK_RESETTING, &eth->state);
- 
- 	rtnl_unlock();
- }
diff --git a/target/linux/generic/backport-6.1/729-09-v6.2-net-ethernet-mtk_wed-add-wcid-overwritten-support-fo.patch b/target/linux/generic/backport-6.1/729-09-v6.2-net-ethernet-mtk_wed-add-wcid-overwritten-support-fo.patch
deleted file mode 100644
index 117ccc090258..000000000000
--- a/target/linux/generic/backport-6.1/729-09-v6.2-net-ethernet-mtk_wed-add-wcid-overwritten-support-fo.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From: Sujuan Chen <sujuan.chen@mediatek.com>
-Date: Thu, 24 Nov 2022 11:18:14 +0800
-Subject: [PATCH] net: ethernet: mtk_wed: add wcid overwritten support for wed
- v1
-
-All wed versions should enable the wcid overwritten feature,
-since the wcid size is controlled by the wlan driver.
-
-Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Co-developed-by: Bo Jiao <bo.jiao@mediatek.com>
-Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -526,9 +526,9 @@ mtk_wed_dma_disable(struct mtk_wed_devic
- 			MTK_WED_WPDMA_RX_D_RX_DRV_EN);
- 		wed_clr(dev, MTK_WED_WDMA_GLO_CFG,
- 			MTK_WED_WDMA_GLO_CFG_TX_DDONE_CHK);
--
--		mtk_wed_set_512_support(dev, false);
- 	}
-+
-+	mtk_wed_set_512_support(dev, false);
- }
- 
- static void
-@@ -1290,9 +1290,10 @@ mtk_wed_start(struct mtk_wed_device *dev
- 		if (mtk_wed_rro_cfg(dev))
- 			return;
- 
--		mtk_wed_set_512_support(dev, dev->wlan.wcid_512);
- 	}
- 
-+	mtk_wed_set_512_support(dev, dev->wlan.wcid_512);
-+
- 	mtk_wed_dma_enable(dev);
- 	dev->running = true;
- }
-@@ -1358,11 +1359,13 @@ mtk_wed_attach(struct mtk_wed_device *de
- 	}
- 
- 	mtk_wed_hw_init_early(dev);
--	if (hw->version == 1)
-+	if (hw->version == 1) {
- 		regmap_update_bits(hw->hifsys, HIFSYS_DMA_AG_MAP,
- 				   BIT(hw->index), 0);
--	else
-+	} else {
-+		dev->rev_id = wed_r32(dev, MTK_WED_REV_ID);
- 		ret = mtk_wed_wo_init(hw);
-+	}
- out:
- 	if (ret)
- 		mtk_wed_detach(dev);
---- a/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -20,6 +20,8 @@ struct mtk_wdma_desc {
- 	__le32 info;
- } __packed __aligned(4);
- 
-+#define MTK_WED_REV_ID					0x004
-+
- #define MTK_WED_RESET					0x008
- #define MTK_WED_RESET_TX_BM				BIT(0)
- #define MTK_WED_RESET_TX_FREE_AGENT			BIT(4)
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -85,6 +85,9 @@ struct mtk_wed_device {
- 	int irq;
- 	u8 version;
- 
-+	/* used by wlan driver */
-+	u32 rev_id;
-+
- 	struct mtk_wed_ring tx_ring[MTK_WED_TX_QUEUES];
- 	struct mtk_wed_ring rx_ring[MTK_WED_RX_QUEUES];
- 	struct mtk_wed_ring txfree_ring;
diff --git a/target/linux/generic/backport-6.1/729-10-v6.2-net-ethernet-mtk_wed-return-status-value-in-mtk_wdma.patch b/target/linux/generic/backport-6.1/729-10-v6.2-net-ethernet-mtk_wed-return-status-value-in-mtk_wdma.patch
deleted file mode 100644
index ec58c3fc5724..000000000000
--- a/target/linux/generic/backport-6.1/729-10-v6.2-net-ethernet-mtk_wed-return-status-value-in-mtk_wdma.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 24 Nov 2022 16:22:51 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: return status value in
- mtk_wdma_rx_reset
-
-Move MTK_WDMA_RESET_IDX configuration in mtk_wdma_rx_reset routine.
-Increase poll timeout to 10ms in order to be aligned with vendor sdk.
-This is a preliminary patch to add Wireless Ethernet Dispatcher reset
-support.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -101,17 +101,21 @@ mtk_wdma_read_reset(struct mtk_wed_devic
- 	return wdma_r32(dev, MTK_WDMA_GLO_CFG);
- }
- 
--static void
-+static int
- mtk_wdma_rx_reset(struct mtk_wed_device *dev)
- {
- 	u32 status, mask = MTK_WDMA_GLO_CFG_RX_DMA_BUSY;
--	int i;
-+	int i, ret;
- 
- 	wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_RX_DMA_EN);
--	if (readx_poll_timeout(mtk_wdma_read_reset, dev, status,
--			       !(status & mask), 0, 1000))
-+	ret = readx_poll_timeout(mtk_wdma_read_reset, dev, status,
-+				 !(status & mask), 0, 10000);
-+	if (ret)
- 		dev_err(dev->hw->dev, "rx reset failed\n");
- 
-+	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
-+	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
-+
- 	for (i = 0; i < ARRAY_SIZE(dev->rx_wdma); i++) {
- 		if (dev->rx_wdma[i].desc)
- 			continue;
-@@ -119,6 +123,8 @@ mtk_wdma_rx_reset(struct mtk_wed_device
- 		wdma_w32(dev,
- 			 MTK_WDMA_RING_RX(i) + MTK_WED_RING_OFS_CPU_IDX, 0);
- 	}
-+
-+	return ret;
- }
- 
- static void
-@@ -565,9 +571,7 @@ mtk_wed_detach(struct mtk_wed_device *de
- 
- 	mtk_wed_stop(dev);
- 
--	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
--	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
--
-+	mtk_wdma_rx_reset(dev);
- 	mtk_wed_reset(dev, MTK_WED_RESET_WED);
- 	if (mtk_wed_get_rx_capa(dev)) {
- 		wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_TX_DMA_EN);
-@@ -582,7 +586,6 @@ mtk_wed_detach(struct mtk_wed_device *de
- 		mtk_wed_wo_reset(dev);
- 		mtk_wed_free_rx_rings(dev);
- 		mtk_wed_wo_deinit(hw);
--		mtk_wdma_rx_reset(dev);
- 	}
- 
- 	if (dev->wlan.bus_type == MTK_WED_BUS_PCIE) {
-@@ -999,11 +1002,7 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 		wed_w32(dev, MTK_WED_RESET_IDX, 0);
- 	}
- 
--	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
--	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
--
--	if (mtk_wed_get_rx_capa(dev))
--		mtk_wdma_rx_reset(dev);
-+	mtk_wdma_rx_reset(dev);
- 
- 	if (busy) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_WDMA_INT_AGENT);
diff --git a/target/linux/generic/backport-6.1/729-11-v6.2-net-ethernet-mtk_wed-move-MTK_WDMA_RESET_IDX_TX-conf.patch b/target/linux/generic/backport-6.1/729-11-v6.2-net-ethernet-mtk_wed-move-MTK_WDMA_RESET_IDX_TX-conf.patch
deleted file mode 100644
index 10c1732c969a..000000000000
--- a/target/linux/generic/backport-6.1/729-11-v6.2-net-ethernet-mtk_wed-move-MTK_WDMA_RESET_IDX_TX-conf.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 24 Nov 2022 16:22:52 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: move MTK_WDMA_RESET_IDX_TX
- configuration in mtk_wdma_tx_reset
-
-Remove duplicated code. Increase poll timeout to 10ms in order to be
-aligned with vendor sdk.
-This is a preliminary patch to add Wireless Ethernet Dispatcher reset
-support.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -135,16 +135,15 @@ mtk_wdma_tx_reset(struct mtk_wed_device
- 
- 	wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_TX_DMA_EN);
- 	if (readx_poll_timeout(mtk_wdma_read_reset, dev, status,
--			       !(status & mask), 0, 1000))
-+			       !(status & mask), 0, 10000))
- 		dev_err(dev->hw->dev, "tx reset failed\n");
- 
--	for (i = 0; i < ARRAY_SIZE(dev->tx_wdma); i++) {
--		if (dev->tx_wdma[i].desc)
--			continue;
-+	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_TX);
-+	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
- 
-+	for (i = 0; i < ARRAY_SIZE(dev->tx_wdma); i++)
- 		wdma_w32(dev,
- 			 MTK_WDMA_RING_TX(i) + MTK_WED_RING_OFS_CPU_IDX, 0);
--	}
- }
- 
- static void
-@@ -573,12 +572,6 @@ mtk_wed_detach(struct mtk_wed_device *de
- 
- 	mtk_wdma_rx_reset(dev);
- 	mtk_wed_reset(dev, MTK_WED_RESET_WED);
--	if (mtk_wed_get_rx_capa(dev)) {
--		wdma_clr(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_TX_DMA_EN);
--		wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_TX);
--		wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
--	}
--
- 	mtk_wed_free_tx_buffer(dev);
- 	mtk_wed_free_tx_rings(dev);
- 
diff --git a/target/linux/generic/backport-6.1/729-12-v6.2-net-ethernet-mtk_wed-update-mtk_wed_stop.patch b/target/linux/generic/backport-6.1/729-12-v6.2-net-ethernet-mtk_wed-update-mtk_wed_stop.patch
deleted file mode 100644
index f4e842d515a8..000000000000
--- a/target/linux/generic/backport-6.1/729-12-v6.2-net-ethernet-mtk_wed-update-mtk_wed_stop.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 24 Nov 2022 16:22:53 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: update mtk_wed_stop
-
-Update mtk_wed_stop routine and rename old mtk_wed_stop() to
-mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet
-Dispatcher reset support.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -539,14 +539,8 @@ mtk_wed_dma_disable(struct mtk_wed_devic
- static void
- mtk_wed_stop(struct mtk_wed_device *dev)
- {
--	mtk_wed_dma_disable(dev);
- 	mtk_wed_set_ext_int(dev, false);
- 
--	wed_clr(dev, MTK_WED_CTRL,
--		MTK_WED_CTRL_WDMA_INT_AGENT_EN |
--		MTK_WED_CTRL_WPDMA_INT_AGENT_EN |
--		MTK_WED_CTRL_WED_TX_BM_EN |
--		MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
- 	wed_w32(dev, MTK_WED_WPDMA_INT_TRIGGER, 0);
- 	wed_w32(dev, MTK_WED_WDMA_INT_TRIGGER, 0);
- 	wdma_w32(dev, MTK_WDMA_INT_MASK, 0);
-@@ -558,7 +552,27 @@ mtk_wed_stop(struct mtk_wed_device *dev)
- 
- 	wed_w32(dev, MTK_WED_EXT_INT_MASK1, 0);
- 	wed_w32(dev, MTK_WED_EXT_INT_MASK2, 0);
--	wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_RX_BM_EN);
-+}
-+
-+static void
-+mtk_wed_deinit(struct mtk_wed_device *dev)
-+{
-+	mtk_wed_stop(dev);
-+	mtk_wed_dma_disable(dev);
-+
-+	wed_clr(dev, MTK_WED_CTRL,
-+		MTK_WED_CTRL_WDMA_INT_AGENT_EN |
-+		MTK_WED_CTRL_WPDMA_INT_AGENT_EN |
-+		MTK_WED_CTRL_WED_TX_BM_EN |
-+		MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
-+
-+	if (dev->hw->version == 1)
-+		return;
-+
-+	wed_clr(dev, MTK_WED_CTRL,
-+		MTK_WED_CTRL_RX_ROUTE_QM_EN |
-+		MTK_WED_CTRL_WED_RX_BM_EN |
-+		MTK_WED_CTRL_RX_RRO_QM_EN);
- }
- 
- static void
-@@ -568,7 +582,7 @@ mtk_wed_detach(struct mtk_wed_device *de
- 
- 	mutex_lock(&hw_lock);
- 
--	mtk_wed_stop(dev);
-+	mtk_wed_deinit(dev);
- 
- 	mtk_wdma_rx_reset(dev);
- 	mtk_wed_reset(dev, MTK_WED_RESET_WED);
-@@ -670,7 +684,7 @@ mtk_wed_hw_init_early(struct mtk_wed_dev
- {
- 	u32 mask, set;
- 
--	mtk_wed_stop(dev);
-+	mtk_wed_deinit(dev);
- 	mtk_wed_reset(dev, MTK_WED_RESET_WED);
- 	mtk_wed_set_wpdma(dev);
- 
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -234,6 +234,8 @@ mtk_wed_get_rx_capa(struct mtk_wed_devic
- 	(_dev)->ops->ppe_check(_dev, _skb, _reason, _hash)
- #define mtk_wed_device_update_msg(_dev, _id, _msg, _len) \
- 	(_dev)->ops->msg_update(_dev, _id, _msg, _len)
-+#define mtk_wed_device_stop(_dev) (_dev)->ops->stop(_dev)
-+#define mtk_wed_device_dma_reset(_dev) (_dev)->ops->reset_dma(_dev)
- #else
- static inline bool mtk_wed_device_active(struct mtk_wed_device *dev)
- {
-@@ -250,6 +252,8 @@ static inline bool mtk_wed_device_active
- #define mtk_wed_device_rx_ring_setup(_dev, _ring, _regs) -ENODEV
- #define mtk_wed_device_ppe_check(_dev, _skb, _reason, _hash)  do {} while (0)
- #define mtk_wed_device_update_msg(_dev, _id, _msg, _len) -ENODEV
-+#define mtk_wed_device_stop(_dev) do {} while (0)
-+#define mtk_wed_device_dma_reset(_dev) do {} while (0)
- #endif
- 
- #endif
diff --git a/target/linux/generic/backport-6.1/729-13-v6.2-net-ethernet-mtk_wed-add-mtk_wed_rx_reset-routine.patch b/target/linux/generic/backport-6.1/729-13-v6.2-net-ethernet-mtk_wed-add-mtk_wed_rx_reset-routine.patch
deleted file mode 100644
index a0fc9da99e7f..000000000000
--- a/target/linux/generic/backport-6.1/729-13-v6.2-net-ethernet-mtk_wed-add-mtk_wed_rx_reset-routine.patch
+++ /dev/null
@@ -1,309 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 24 Nov 2022 16:22:54 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: add mtk_wed_rx_reset routine
-
-Introduce mtk_wed_rx_reset routine in order to reset rx DMA for Wireless
-Ethernet Dispatcher available on MT7986 SoC.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -944,42 +944,130 @@ mtk_wed_ring_reset(struct mtk_wed_ring *
- }
- 
- static u32
--mtk_wed_check_busy(struct mtk_wed_device *dev)
-+mtk_wed_check_busy(struct mtk_wed_device *dev, u32 reg, u32 mask)
- {
--	if (wed_r32(dev, MTK_WED_GLO_CFG) & MTK_WED_GLO_CFG_TX_DMA_BUSY)
--		return true;
--
--	if (wed_r32(dev, MTK_WED_WPDMA_GLO_CFG) &
--	    MTK_WED_WPDMA_GLO_CFG_TX_DRV_BUSY)
--		return true;
--
--	if (wed_r32(dev, MTK_WED_CTRL) & MTK_WED_CTRL_WDMA_INT_AGENT_BUSY)
--		return true;
--
--	if (wed_r32(dev, MTK_WED_WDMA_GLO_CFG) &
--	    MTK_WED_WDMA_GLO_CFG_RX_DRV_BUSY)
--		return true;
--
--	if (wdma_r32(dev, MTK_WDMA_GLO_CFG) &
--	    MTK_WED_WDMA_GLO_CFG_RX_DRV_BUSY)
--		return true;
--
--	if (wed_r32(dev, MTK_WED_CTRL) &
--	    (MTK_WED_CTRL_WED_TX_BM_BUSY | MTK_WED_CTRL_WED_TX_FREE_AGENT_BUSY))
--		return true;
--
--	return false;
-+	return !!(wed_r32(dev, reg) & mask);
- }
- 
- static int
--mtk_wed_poll_busy(struct mtk_wed_device *dev)
-+mtk_wed_poll_busy(struct mtk_wed_device *dev, u32 reg, u32 mask)
- {
- 	int sleep = 15000;
- 	int timeout = 100 * sleep;
- 	u32 val;
- 
- 	return read_poll_timeout(mtk_wed_check_busy, val, !val, sleep,
--				 timeout, false, dev);
-+				 timeout, false, dev, reg, mask);
-+}
-+
-+static int
-+mtk_wed_rx_reset(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wed_wo *wo = dev->hw->wed_wo;
-+	u8 val = MTK_WED_WO_STATE_SER_RESET;
-+	int i, ret;
-+
-+	ret = mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO,
-+				   MTK_WED_WO_CMD_CHANGE_STATE, &val,
-+				   sizeof(val), true);
-+	if (ret)
-+		return ret;
-+
-+	wed_clr(dev, MTK_WED_WPDMA_RX_D_GLO_CFG, MTK_WED_WPDMA_RX_D_RX_DRV_EN);
-+	ret = mtk_wed_poll_busy(dev, MTK_WED_WPDMA_RX_D_GLO_CFG,
-+				MTK_WED_WPDMA_RX_D_RX_DRV_BUSY);
-+	if (ret) {
-+		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_INT_AGENT);
-+		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_RX_D_DRV);
-+	} else {
-+		wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX,
-+			MTK_WED_WPDMA_RX_D_RST_CRX_IDX |
-+			MTK_WED_WPDMA_RX_D_RST_DRV_IDX);
-+
-+		wed_set(dev, MTK_WED_WPDMA_RX_D_GLO_CFG,
-+			MTK_WED_WPDMA_RX_D_RST_INIT_COMPLETE |
-+			MTK_WED_WPDMA_RX_D_FSM_RETURN_IDLE);
-+		wed_clr(dev, MTK_WED_WPDMA_RX_D_GLO_CFG,
-+			MTK_WED_WPDMA_RX_D_RST_INIT_COMPLETE |
-+			MTK_WED_WPDMA_RX_D_FSM_RETURN_IDLE);
-+
-+		wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX, 0);
-+	}
-+
-+	/* reset rro qm */
-+	wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_RX_RRO_QM_EN);
-+	ret = mtk_wed_poll_busy(dev, MTK_WED_CTRL,
-+				MTK_WED_CTRL_RX_RRO_QM_BUSY);
-+	if (ret) {
-+		mtk_wed_reset(dev, MTK_WED_RESET_RX_RRO_QM);
-+	} else {
-+		wed_set(dev, MTK_WED_RROQM_RST_IDX,
-+			MTK_WED_RROQM_RST_IDX_MIOD |
-+			MTK_WED_RROQM_RST_IDX_FDBK);
-+		wed_w32(dev, MTK_WED_RROQM_RST_IDX, 0);
-+	}
-+
-+	/* reset route qm */
-+	wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_RX_ROUTE_QM_EN);
-+	ret = mtk_wed_poll_busy(dev, MTK_WED_CTRL,
-+				MTK_WED_CTRL_RX_ROUTE_QM_BUSY);
-+	if (ret)
-+		mtk_wed_reset(dev, MTK_WED_RESET_RX_ROUTE_QM);
-+	else
-+		wed_set(dev, MTK_WED_RTQM_GLO_CFG,
-+			MTK_WED_RTQM_Q_RST);
-+
-+	/* reset tx wdma */
-+	mtk_wdma_tx_reset(dev);
-+
-+	/* reset tx wdma drv */
-+	wed_clr(dev, MTK_WED_WDMA_GLO_CFG, MTK_WED_WDMA_GLO_CFG_TX_DRV_EN);
-+	mtk_wed_poll_busy(dev, MTK_WED_CTRL,
-+			  MTK_WED_CTRL_WDMA_INT_AGENT_BUSY);
-+	mtk_wed_reset(dev, MTK_WED_RESET_WDMA_TX_DRV);
-+
-+	/* reset wed rx dma */
-+	ret = mtk_wed_poll_busy(dev, MTK_WED_GLO_CFG,
-+				MTK_WED_GLO_CFG_RX_DMA_BUSY);
-+	wed_clr(dev, MTK_WED_GLO_CFG, MTK_WED_GLO_CFG_RX_DMA_EN);
-+	if (ret) {
-+		mtk_wed_reset(dev, MTK_WED_RESET_WED_RX_DMA);
-+	} else {
-+		struct mtk_eth *eth = dev->hw->eth;
-+
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+			wed_set(dev, MTK_WED_RESET_IDX,
-+				MTK_WED_RESET_IDX_RX_V2);
-+		else
-+			wed_set(dev, MTK_WED_RESET_IDX, MTK_WED_RESET_IDX_RX);
-+		wed_w32(dev, MTK_WED_RESET_IDX, 0);
-+	}
-+
-+	/* reset rx bm */
-+	wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_RX_BM_EN);
-+	mtk_wed_poll_busy(dev, MTK_WED_CTRL,
-+			  MTK_WED_CTRL_WED_RX_BM_BUSY);
-+	mtk_wed_reset(dev, MTK_WED_RESET_RX_BM);
-+
-+	/* wo change to enable state */
-+	val = MTK_WED_WO_STATE_ENABLE;
-+	ret = mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO,
-+				   MTK_WED_WO_CMD_CHANGE_STATE, &val,
-+				   sizeof(val), true);
-+	if (ret)
-+		return ret;
-+
-+	/* wed_rx_ring_reset */
-+	for (i = 0; i < ARRAY_SIZE(dev->rx_ring); i++) {
-+		if (!dev->rx_ring[i].desc)
-+			continue;
-+
-+		mtk_wed_ring_reset(&dev->rx_ring[i], MTK_WED_RX_RING_SIZE,
-+				   false);
-+	}
-+	mtk_wed_free_rx_buffer(dev);
-+
-+	return 0;
- }
- 
- static void
-@@ -997,19 +1085,23 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 				   true);
- 	}
- 
--	if (mtk_wed_poll_busy(dev))
--		busy = mtk_wed_check_busy(dev);
--
-+	/* 1. reset WED tx DMA */
-+	wed_clr(dev, MTK_WED_GLO_CFG, MTK_WED_GLO_CFG_TX_DMA_EN);
-+	busy = mtk_wed_poll_busy(dev, MTK_WED_GLO_CFG,
-+				 MTK_WED_GLO_CFG_TX_DMA_BUSY);
- 	if (busy) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_WED_TX_DMA);
- 	} else {
--		wed_w32(dev, MTK_WED_RESET_IDX,
--			MTK_WED_RESET_IDX_TX |
--			MTK_WED_RESET_IDX_RX);
-+		wed_w32(dev, MTK_WED_RESET_IDX, MTK_WED_RESET_IDX_TX);
- 		wed_w32(dev, MTK_WED_RESET_IDX, 0);
- 	}
- 
--	mtk_wdma_rx_reset(dev);
-+	/* 2. reset WDMA rx DMA */
-+	busy = !!mtk_wdma_rx_reset(dev);
-+	wed_clr(dev, MTK_WED_WDMA_GLO_CFG, MTK_WED_WDMA_GLO_CFG_RX_DRV_EN);
-+	if (!busy)
-+		busy = mtk_wed_poll_busy(dev, MTK_WED_WDMA_GLO_CFG,
-+					 MTK_WED_WDMA_GLO_CFG_RX_DRV_BUSY);
- 
- 	if (busy) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_WDMA_INT_AGENT);
-@@ -1026,6 +1118,9 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 			MTK_WED_WDMA_GLO_CFG_RST_INIT_COMPLETE);
- 	}
- 
-+	/* 3. reset WED WPDMA tx */
-+	wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
-+
- 	for (i = 0; i < 100; i++) {
- 		val = wed_r32(dev, MTK_WED_TX_BM_INTF);
- 		if (FIELD_GET(MTK_WED_TX_BM_INTF_TKFIFO_FDEP, val) == 0x40)
-@@ -1033,8 +1128,19 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 	}
- 
- 	mtk_wed_reset(dev, MTK_WED_RESET_TX_FREE_AGENT);
-+	wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_TX_BM_EN);
- 	mtk_wed_reset(dev, MTK_WED_RESET_TX_BM);
- 
-+	/* 4. reset WED WPDMA tx */
-+	busy = mtk_wed_poll_busy(dev, MTK_WED_WPDMA_GLO_CFG,
-+				 MTK_WED_WPDMA_GLO_CFG_TX_DRV_BUSY);
-+	wed_clr(dev, MTK_WED_WPDMA_GLO_CFG,
-+		MTK_WED_WPDMA_GLO_CFG_TX_DRV_EN |
-+		MTK_WED_WPDMA_GLO_CFG_RX_DRV_EN);
-+	if (!busy)
-+		busy = mtk_wed_poll_busy(dev, MTK_WED_WPDMA_GLO_CFG,
-+					 MTK_WED_WPDMA_GLO_CFG_RX_DRV_BUSY);
-+
- 	if (busy) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_INT_AGENT);
- 		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_TX_DRV);
-@@ -1045,6 +1151,17 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 			MTK_WED_WPDMA_RESET_IDX_RX);
- 		wed_w32(dev, MTK_WED_WPDMA_RESET_IDX, 0);
- 	}
-+
-+	dev->init_done = false;
-+	if (dev->hw->version == 1)
-+		return;
-+
-+	if (!busy) {
-+		wed_w32(dev, MTK_WED_RESET_IDX, MTK_WED_RESET_WPDMA_IDX_RX);
-+		wed_w32(dev, MTK_WED_RESET_IDX, 0);
-+	}
-+
-+	mtk_wed_rx_reset(dev);
- }
- 
- static int
-@@ -1267,6 +1384,9 @@ mtk_wed_start(struct mtk_wed_device *dev
- {
- 	int i;
- 
-+	if (mtk_wed_get_rx_capa(dev) && mtk_wed_rx_buffer_alloc(dev))
-+		return;
-+
- 	for (i = 0; i < ARRAY_SIZE(dev->rx_wdma); i++)
- 		if (!dev->rx_wdma[i].desc)
- 			mtk_wed_wdma_rx_ring_setup(dev, i, 16);
-@@ -1355,10 +1475,6 @@ mtk_wed_attach(struct mtk_wed_device *de
- 		goto out;
- 
- 	if (mtk_wed_get_rx_capa(dev)) {
--		ret = mtk_wed_rx_buffer_alloc(dev);
--		if (ret)
--			goto out;
--
- 		ret = mtk_wed_rro_alloc(dev);
- 		if (ret)
- 			goto out;
---- a/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -24,11 +24,15 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_RESET					0x008
- #define MTK_WED_RESET_TX_BM				BIT(0)
-+#define MTK_WED_RESET_RX_BM				BIT(1)
- #define MTK_WED_RESET_TX_FREE_AGENT			BIT(4)
- #define MTK_WED_RESET_WPDMA_TX_DRV			BIT(8)
- #define MTK_WED_RESET_WPDMA_RX_DRV			BIT(9)
-+#define MTK_WED_RESET_WPDMA_RX_D_DRV			BIT(10)
- #define MTK_WED_RESET_WPDMA_INT_AGENT			BIT(11)
- #define MTK_WED_RESET_WED_TX_DMA			BIT(12)
-+#define MTK_WED_RESET_WED_RX_DMA			BIT(13)
-+#define MTK_WED_RESET_WDMA_TX_DRV			BIT(16)
- #define MTK_WED_RESET_WDMA_RX_DRV			BIT(17)
- #define MTK_WED_RESET_WDMA_INT_AGENT			BIT(19)
- #define MTK_WED_RESET_RX_RRO_QM				BIT(20)
-@@ -158,6 +162,8 @@ struct mtk_wdma_desc {
- #define MTK_WED_RESET_IDX				0x20c
- #define MTK_WED_RESET_IDX_TX				GENMASK(3, 0)
- #define MTK_WED_RESET_IDX_RX				GENMASK(17, 16)
-+#define MTK_WED_RESET_IDX_RX_V2				GENMASK(7, 6)
-+#define MTK_WED_RESET_WPDMA_IDX_RX			GENMASK(31, 30)
- 
- #define MTK_WED_TX_MIB(_n)				(0x2a0 + (_n) * 4)
- #define MTK_WED_RX_MIB(_n)				(0x2e0 + (_n) * 4)
-@@ -267,6 +273,9 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_WPDMA_RX_D_GLO_CFG			0x75c
- #define MTK_WED_WPDMA_RX_D_RX_DRV_EN			BIT(0)
-+#define MTK_WED_WPDMA_RX_D_RX_DRV_BUSY			BIT(1)
-+#define MTK_WED_WPDMA_RX_D_FSM_RETURN_IDLE		BIT(3)
-+#define MTK_WED_WPDMA_RX_D_RST_INIT_COMPLETE		BIT(4)
- #define MTK_WED_WPDMA_RX_D_INIT_PHASE_RXEN_SEL		GENMASK(11, 7)
- #define MTK_WED_WPDMA_RX_D_RXD_READ_LEN			GENMASK(31, 24)
- 
diff --git a/target/linux/generic/backport-6.1/729-14-v6.2-net-ethernet-mtk_wed-add-reset-to-tx_ring_setup-call.patch b/target/linux/generic/backport-6.1/729-14-v6.2-net-ethernet-mtk_wed-add-reset-to-tx_ring_setup-call.patch
deleted file mode 100644
index 4404971cc74d..000000000000
--- a/target/linux/generic/backport-6.1/729-14-v6.2-net-ethernet-mtk_wed-add-reset-to-tx_ring_setup-call.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 24 Nov 2022 16:22:55 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: add reset to tx_ring_setup callback
-
-Introduce reset parameter to mtk_wed_tx_ring_setup signature.
-This is a preliminary patch to add Wireless Ethernet Dispatcher reset
-support.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -1181,7 +1181,8 @@ mtk_wed_ring_alloc(struct mtk_wed_device
- }
- 
- static int
--mtk_wed_wdma_rx_ring_setup(struct mtk_wed_device *dev, int idx, int size)
-+mtk_wed_wdma_rx_ring_setup(struct mtk_wed_device *dev, int idx, int size,
-+			   bool reset)
- {
- 	u32 desc_size = sizeof(struct mtk_wdma_desc) * dev->hw->version;
- 	struct mtk_wed_ring *wdma;
-@@ -1190,8 +1191,8 @@ mtk_wed_wdma_rx_ring_setup(struct mtk_we
- 		return -EINVAL;
- 
- 	wdma = &dev->rx_wdma[idx];
--	if (mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE, desc_size,
--			       true))
-+	if (!reset && mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE,
-+					 desc_size, true))
- 		return -ENOMEM;
- 
- 	wdma_w32(dev, MTK_WDMA_RING_RX(idx) + MTK_WED_RING_OFS_BASE,
-@@ -1389,7 +1390,7 @@ mtk_wed_start(struct mtk_wed_device *dev
- 
- 	for (i = 0; i < ARRAY_SIZE(dev->rx_wdma); i++)
- 		if (!dev->rx_wdma[i].desc)
--			mtk_wed_wdma_rx_ring_setup(dev, i, 16);
-+			mtk_wed_wdma_rx_ring_setup(dev, i, 16, false);
- 
- 	mtk_wed_hw_init(dev);
- 	mtk_wed_configure_irq(dev, irq_mask);
-@@ -1498,7 +1499,8 @@ unlock:
- }
- 
- static int
--mtk_wed_tx_ring_setup(struct mtk_wed_device *dev, int idx, void __iomem *regs)
-+mtk_wed_tx_ring_setup(struct mtk_wed_device *dev, int idx, void __iomem *regs,
-+		      bool reset)
- {
- 	struct mtk_wed_ring *ring = &dev->tx_ring[idx];
- 
-@@ -1517,11 +1519,12 @@ mtk_wed_tx_ring_setup(struct mtk_wed_dev
- 	if (WARN_ON(idx >= ARRAY_SIZE(dev->tx_ring)))
- 		return -EINVAL;
- 
--	if (mtk_wed_ring_alloc(dev, ring, MTK_WED_TX_RING_SIZE,
--			       sizeof(*ring->desc), true))
-+	if (!reset && mtk_wed_ring_alloc(dev, ring, MTK_WED_TX_RING_SIZE,
-+					 sizeof(*ring->desc), true))
- 		return -ENOMEM;
- 
--	if (mtk_wed_wdma_rx_ring_setup(dev, idx, MTK_WED_WDMA_RING_SIZE))
-+	if (mtk_wed_wdma_rx_ring_setup(dev, idx, MTK_WED_WDMA_RING_SIZE,
-+				       reset))
- 		return -ENOMEM;
- 
- 	ring->reg_base = MTK_WED_RING_TX(idx);
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -158,7 +158,7 @@ struct mtk_wed_device {
- struct mtk_wed_ops {
- 	int (*attach)(struct mtk_wed_device *dev);
- 	int (*tx_ring_setup)(struct mtk_wed_device *dev, int ring,
--			     void __iomem *regs);
-+			     void __iomem *regs, bool reset);
- 	int (*rx_ring_setup)(struct mtk_wed_device *dev, int ring,
- 			     void __iomem *regs);
- 	int (*txfree_ring_setup)(struct mtk_wed_device *dev,
-@@ -216,8 +216,8 @@ mtk_wed_get_rx_capa(struct mtk_wed_devic
- #define mtk_wed_device_active(_dev) !!(_dev)->ops
- #define mtk_wed_device_detach(_dev) (_dev)->ops->detach(_dev)
- #define mtk_wed_device_start(_dev, _mask) (_dev)->ops->start(_dev, _mask)
--#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs) \
--	(_dev)->ops->tx_ring_setup(_dev, _ring, _regs)
-+#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs, _reset) \
-+	(_dev)->ops->tx_ring_setup(_dev, _ring, _regs, _reset)
- #define mtk_wed_device_txfree_ring_setup(_dev, _regs) \
- 	(_dev)->ops->txfree_ring_setup(_dev, _regs)
- #define mtk_wed_device_reg_read(_dev, _reg) \
-@@ -243,7 +243,7 @@ static inline bool mtk_wed_device_active
- }
- #define mtk_wed_device_detach(_dev) do {} while (0)
- #define mtk_wed_device_start(_dev, _mask) do {} while (0)
--#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs) -ENODEV
-+#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs, _reset) -ENODEV
- #define mtk_wed_device_txfree_ring_setup(_dev, _ring, _regs) -ENODEV
- #define mtk_wed_device_reg_read(_dev, _reg) 0
- #define mtk_wed_device_reg_write(_dev, _reg, _val) do {} while (0)
diff --git a/target/linux/generic/backport-6.1/729-15-v6.2-net-ethernet-mtk_wed-fix-sleep-while-atomic-in-mtk_w.patch b/target/linux/generic/backport-6.1/729-15-v6.2-net-ethernet-mtk_wed-fix-sleep-while-atomic-in-mtk_w.patch
deleted file mode 100644
index f9b11326b1c8..000000000000
--- a/target/linux/generic/backport-6.1/729-15-v6.2-net-ethernet-mtk_wed-fix-sleep-while-atomic-in-mtk_w.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 1 Dec 2022 16:26:53 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: fix sleep while atomic in
- mtk_wed_wo_queue_refill
-
-In order to fix the following sleep while atomic bug always alloc pages
-with GFP_ATOMIC in mtk_wed_wo_queue_refill since page_frag_alloc runs in
-spin_lock critical section.
-
-[    9.049719] Hardware name: MediaTek MT7986a RFB (DT)
-[    9.054665] Call trace:
-[    9.057096]  dump_backtrace+0x0/0x154
-[    9.060751]  show_stack+0x14/0x1c
-[    9.064052]  dump_stack_lvl+0x64/0x7c
-[    9.067702]  dump_stack+0x14/0x2c
-[    9.071001]  ___might_sleep+0xec/0x120
-[    9.074736]  __might_sleep+0x4c/0x9c
-[    9.078296]  __alloc_pages+0x184/0x2e4
-[    9.082030]  page_frag_alloc_align+0x98/0x1ac
-[    9.086369]  mtk_wed_wo_queue_refill+0x134/0x234
-[    9.090974]  mtk_wed_wo_init+0x174/0x2c0
-[    9.094881]  mtk_wed_attach+0x7c8/0x7e0
-[    9.098701]  mt7915_mmio_wed_init+0x1f0/0x3a0 [mt7915e]
-[    9.103940]  mt7915_pci_probe+0xec/0x3bc [mt7915e]
-[    9.108727]  pci_device_probe+0xac/0x13c
-[    9.112638]  really_probe.part.0+0x98/0x2f4
-[    9.116807]  __driver_probe_device+0x94/0x13c
-[    9.121147]  driver_probe_device+0x40/0x114
-[    9.125314]  __driver_attach+0x7c/0x180
-[    9.129133]  bus_for_each_dev+0x5c/0x90
-[    9.132953]  driver_attach+0x20/0x2c
-[    9.136513]  bus_add_driver+0x104/0x1fc
-[    9.140333]  driver_register+0x74/0x120
-[    9.144153]  __pci_register_driver+0x40/0x50
-[    9.148407]  mt7915_init+0x5c/0x1000 [mt7915e]
-[    9.152848]  do_one_initcall+0x40/0x25c
-[    9.156669]  do_init_module+0x44/0x230
-[    9.160403]  load_module+0x1f30/0x2750
-[    9.164135]  __do_sys_init_module+0x150/0x200
-[    9.168475]  __arm64_sys_init_module+0x18/0x20
-[    9.172901]  invoke_syscall.constprop.0+0x4c/0xe0
-[    9.177589]  do_el0_svc+0x48/0xe0
-[    9.180889]  el0_svc+0x14/0x50
-[    9.183929]  el0t_64_sync_handler+0x9c/0x120
-[    9.188183]  el0t_64_sync+0x158/0x15c
-
-Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
-Link: https://lore.kernel.org/r/67ca94bdd3d9eaeb86e52b3050fbca0bcf7bb02f.1669908312.git.lorenzo@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.c
-@@ -133,17 +133,18 @@ mtk_wed_wo_dequeue(struct mtk_wed_wo *wo
- 
- static int
- mtk_wed_wo_queue_refill(struct mtk_wed_wo *wo, struct mtk_wed_wo_queue *q,
--			gfp_t gfp, bool rx)
-+			bool rx)
- {
- 	enum dma_data_direction dir = rx ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
- 	int n_buf = 0;
- 
- 	spin_lock_bh(&q->lock);
- 	while (q->queued < q->n_desc) {
--		void *buf = page_frag_alloc(&q->cache, q->buf_size, gfp);
- 		struct mtk_wed_wo_queue_entry *entry;
- 		dma_addr_t addr;
-+		void *buf;
- 
-+		buf = page_frag_alloc(&q->cache, q->buf_size, GFP_ATOMIC);
- 		if (!buf)
- 			break;
- 
-@@ -215,7 +216,7 @@ mtk_wed_wo_rx_run_queue(struct mtk_wed_w
- 			mtk_wed_mcu_rx_unsolicited_event(wo, skb);
- 	}
- 
--	if (mtk_wed_wo_queue_refill(wo, q, GFP_ATOMIC, true)) {
-+	if (mtk_wed_wo_queue_refill(wo, q, true)) {
- 		u32 index = (q->head - 1) % q->n_desc;
- 
- 		mtk_wed_wo_queue_kick(wo, q, index);
-@@ -432,7 +433,7 @@ mtk_wed_wo_hardware_init(struct mtk_wed_
- 	if (ret)
- 		goto error;
- 
--	mtk_wed_wo_queue_refill(wo, &wo->q_tx, GFP_KERNEL, false);
-+	mtk_wed_wo_queue_refill(wo, &wo->q_tx, false);
- 	mtk_wed_wo_queue_reset(wo, &wo->q_tx);
- 
- 	regs.desc_base = MTK_WED_WO_CCIF_DUMMY5;
-@@ -446,7 +447,7 @@ mtk_wed_wo_hardware_init(struct mtk_wed_
- 	if (ret)
- 		goto error;
- 
--	mtk_wed_wo_queue_refill(wo, &wo->q_rx, GFP_KERNEL, true);
-+	mtk_wed_wo_queue_refill(wo, &wo->q_rx, true);
- 	mtk_wed_wo_queue_reset(wo, &wo->q_rx);
- 
- 	/* rx queue irqmask */
diff --git a/target/linux/generic/backport-6.1/729-16-v6.3-net-ethernet-mtk_wed-get-rid-of-queue-lock-for-rx-qu.patch b/target/linux/generic/backport-6.1/729-16-v6.3-net-ethernet-mtk_wed-get-rid-of-queue-lock-for-rx-qu.patch
deleted file mode 100644
index fa6f56dbe724..000000000000
--- a/target/linux/generic/backport-6.1/729-16-v6.3-net-ethernet-mtk_wed-get-rid-of-queue-lock-for-rx-qu.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Tue, 10 Jan 2023 10:31:26 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: get rid of queue lock for rx queue
-
-Queue spinlock is currently held in mtk_wed_wo_queue_rx_clean and
-mtk_wed_wo_queue_refill routines for MTK Wireless Ethernet Dispatcher
-MCU rx queue. mtk_wed_wo_queue_refill() is running during initialization
-and in rx tasklet while mtk_wed_wo_queue_rx_clean() is running in
-mtk_wed_wo_hw_deinit() during hw de-init phase after rx tasklet has been
-disabled. Since mtk_wed_wo_queue_rx_clean and mtk_wed_wo_queue_refill
-routines can't run concurrently get rid of spinlock for mcu rx queue.
-
-Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Link: https://lore.kernel.org/r/36ec3b729542ea60898471d890796f745479ba32.1673342990.git.lorenzo@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.c
-@@ -138,7 +138,6 @@ mtk_wed_wo_queue_refill(struct mtk_wed_w
- 	enum dma_data_direction dir = rx ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
- 	int n_buf = 0;
- 
--	spin_lock_bh(&q->lock);
- 	while (q->queued < q->n_desc) {
- 		struct mtk_wed_wo_queue_entry *entry;
- 		dma_addr_t addr;
-@@ -172,7 +171,6 @@ mtk_wed_wo_queue_refill(struct mtk_wed_w
- 		q->queued++;
- 		n_buf++;
- 	}
--	spin_unlock_bh(&q->lock);
- 
- 	return n_buf;
- }
-@@ -316,7 +314,6 @@ mtk_wed_wo_queue_rx_clean(struct mtk_wed
- {
- 	struct page *page;
- 
--	spin_lock_bh(&q->lock);
- 	for (;;) {
- 		void *buf = mtk_wed_wo_dequeue(wo, q, NULL, true);
- 
-@@ -325,7 +322,6 @@ mtk_wed_wo_queue_rx_clean(struct mtk_wed
- 
- 		skb_free_frag(buf);
- 	}
--	spin_unlock_bh(&q->lock);
- 
- 	if (!q->cache.va)
- 		return;
diff --git a/target/linux/generic/backport-6.1/729-17-v6.3-net-ethernet-mtk_wed-get-rid-of-queue-lock-for-tx-qu.patch b/target/linux/generic/backport-6.1/729-17-v6.3-net-ethernet-mtk_wed-get-rid-of-queue-lock-for-tx-qu.patch
deleted file mode 100644
index 9b1e4c325070..000000000000
--- a/target/linux/generic/backport-6.1/729-17-v6.3-net-ethernet-mtk_wed-get-rid-of-queue-lock-for-tx-qu.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 12 Jan 2023 10:21:29 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: get rid of queue lock for tx queue
-
-Similar to MTK Wireless Ethernet Dispatcher (WED) MCU rx queue,
-we do not need to protect WED MCU tx queue with a spin lock since
-the tx queue is accessed in the two following routines:
-- mtk_wed_wo_queue_tx_skb():
-  it is run at initialization and during mt7915 normal operation.
-  Moreover MCU messages are serialized through MCU mutex.
-- mtk_wed_wo_queue_tx_clean():
-  it runs just at mt7915 driver module unload when no more messages
-  are sent to the MCU.
-
-Remove tx queue spinlock.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Link: https://lore.kernel.org/r/7bd0337b2a13ab1a63673b7c03fd35206b3b284e.1673515140.git.lorenzo@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.c
-@@ -258,7 +258,6 @@ mtk_wed_wo_queue_alloc(struct mtk_wed_wo
- 		       int n_desc, int buf_size, int index,
- 		       struct mtk_wed_wo_queue_regs *regs)
- {
--	spin_lock_init(&q->lock);
- 	q->regs = *regs;
- 	q->n_desc = n_desc;
- 	q->buf_size = buf_size;
-@@ -290,7 +289,6 @@ mtk_wed_wo_queue_tx_clean(struct mtk_wed
- 	struct page *page;
- 	int i;
- 
--	spin_lock_bh(&q->lock);
- 	for (i = 0; i < q->n_desc; i++) {
- 		struct mtk_wed_wo_queue_entry *entry = &q->entry[i];
- 
-@@ -299,7 +297,6 @@ mtk_wed_wo_queue_tx_clean(struct mtk_wed
- 		skb_free_frag(entry->buf);
- 		entry->buf = NULL;
- 	}
--	spin_unlock_bh(&q->lock);
- 
- 	if (!q->cache.va)
- 		return;
-@@ -347,8 +344,6 @@ int mtk_wed_wo_queue_tx_skb(struct mtk_w
- 	int ret = 0, index;
- 	u32 ctrl;
- 
--	spin_lock_bh(&q->lock);
--
- 	q->tail = mtk_wed_mmio_r32(wo, q->regs.dma_idx);
- 	index = (q->head + 1) % q->n_desc;
- 	if (q->tail == index) {
-@@ -379,8 +374,6 @@ int mtk_wed_wo_queue_tx_skb(struct mtk_w
- 	mtk_wed_wo_queue_kick(wo, q, q->head);
- 	mtk_wed_wo_kickout(wo);
- out:
--	spin_unlock_bh(&q->lock);
--
- 	dev_kfree_skb(skb);
- 
- 	return ret;
---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-@@ -211,7 +211,6 @@ struct mtk_wed_wo_queue {
- 	struct mtk_wed_wo_queue_regs regs;
- 
- 	struct page_frag_cache cache;
--	spinlock_t lock;
- 
- 	struct mtk_wed_wo_queue_desc *desc;
- 	dma_addr_t desc_dma;
diff --git a/target/linux/generic/backport-6.1/729-18-v6.3-net-ethernet-mtk_eth_soc-introduce-mtk_hw_reset-util.patch b/target/linux/generic/backport-6.1/729-18-v6.3-net-ethernet-mtk_eth_soc-introduce-mtk_hw_reset-util.patch
deleted file mode 100644
index fde0af25df8a..000000000000
--- a/target/linux/generic/backport-6.1/729-18-v6.3-net-ethernet-mtk_eth_soc-introduce-mtk_hw_reset-util.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 14 Jan 2023 18:01:28 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: introduce mtk_hw_reset utility
- routine
-
-This is a preliminary patch to add Wireless Ethernet Dispatcher reset
-support.
-
-Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -3255,6 +3255,27 @@ static void mtk_set_mcr_max_rx(struct mt
- 		mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id));
- }
- 
-+static void mtk_hw_reset(struct mtk_eth *eth)
-+{
-+	u32 val;
-+
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+		regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN, 0);
-+		val = RSTCTRL_PPE0_V2;
-+	} else {
-+		val = RSTCTRL_PPE0;
-+	}
-+
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+		val |= RSTCTRL_PPE1;
-+
-+	ethsys_reset(eth, RSTCTRL_ETH | RSTCTRL_FE | val);
-+
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+		regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN,
-+			     0x3ffffff);
-+}
-+
- static int mtk_hw_init(struct mtk_eth *eth)
- {
- 	u32 dma_mask = ETHSYS_DMA_AG_MAP_PDMA | ETHSYS_DMA_AG_MAP_QDMA |
-@@ -3294,22 +3315,9 @@ static int mtk_hw_init(struct mtk_eth *e
- 		return 0;
- 	}
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
--		regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN, 0);
--		val = RSTCTRL_PPE0_V2;
--	} else {
--		val = RSTCTRL_PPE0;
--	}
--
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
--		val |= RSTCTRL_PPE1;
--
--	ethsys_reset(eth, RSTCTRL_ETH | RSTCTRL_FE | val);
-+	mtk_hw_reset(eth);
- 
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
--		regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN,
--			     0x3ffffff);
--
- 		/* Set FE to PDMAv2 if necessary */
- 		val = mtk_r32(eth, MTK_FE_GLO_MISC);
- 		mtk_w32(eth,  val | BIT(4), MTK_FE_GLO_MISC);
diff --git a/target/linux/generic/backport-6.1/729-19-v6.3-net-ethernet-mtk_eth_soc-introduce-mtk_hw_warm_reset.patch b/target/linux/generic/backport-6.1/729-19-v6.3-net-ethernet-mtk_eth_soc-introduce-mtk_hw_warm_reset.patch
deleted file mode 100644
index e6a94f616e39..000000000000
--- a/target/linux/generic/backport-6.1/729-19-v6.3-net-ethernet-mtk_eth_soc-introduce-mtk_hw_warm_reset.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 14 Jan 2023 18:01:29 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: introduce mtk_hw_warm_reset
- support
-
-Introduce mtk_hw_warm_reset utility routine. This is a preliminary patch
-to align reset procedure to vendor sdk and avoid to power down the chip
-during hw reset.
-
-Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -3276,7 +3276,54 @@ static void mtk_hw_reset(struct mtk_eth
- 			     0x3ffffff);
- }
- 
--static int mtk_hw_init(struct mtk_eth *eth)
-+static u32 mtk_hw_reset_read(struct mtk_eth *eth)
-+{
-+	u32 val;
-+
-+	regmap_read(eth->ethsys, ETHSYS_RSTCTRL, &val);
-+	return val;
-+}
-+
-+static void mtk_hw_warm_reset(struct mtk_eth *eth)
-+{
-+	u32 rst_mask, val;
-+
-+	regmap_update_bits(eth->ethsys, ETHSYS_RSTCTRL, RSTCTRL_FE,
-+			   RSTCTRL_FE);
-+	if (readx_poll_timeout_atomic(mtk_hw_reset_read, eth, val,
-+				      val & RSTCTRL_FE, 1, 1000)) {
-+		dev_err(eth->dev, "warm reset failed\n");
-+		mtk_hw_reset(eth);
-+		return;
-+	}
-+
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+		rst_mask = RSTCTRL_ETH | RSTCTRL_PPE0_V2;
-+	else
-+		rst_mask = RSTCTRL_ETH | RSTCTRL_PPE0;
-+
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+		rst_mask |= RSTCTRL_PPE1;
-+
-+	regmap_update_bits(eth->ethsys, ETHSYS_RSTCTRL, rst_mask, rst_mask);
-+
-+	udelay(1);
-+	val = mtk_hw_reset_read(eth);
-+	if (!(val & rst_mask))
-+		dev_err(eth->dev, "warm reset stage0 failed %08x (%08x)\n",
-+			val, rst_mask);
-+
-+	rst_mask |= RSTCTRL_FE;
-+	regmap_update_bits(eth->ethsys, ETHSYS_RSTCTRL, rst_mask, ~rst_mask);
-+
-+	udelay(1);
-+	val = mtk_hw_reset_read(eth);
-+	if (val & rst_mask)
-+		dev_err(eth->dev, "warm reset stage1 failed %08x (%08x)\n",
-+			val, rst_mask);
-+}
-+
-+static int mtk_hw_init(struct mtk_eth *eth, bool reset)
- {
- 	u32 dma_mask = ETHSYS_DMA_AG_MAP_PDMA | ETHSYS_DMA_AG_MAP_QDMA |
- 		       ETHSYS_DMA_AG_MAP_PPE;
-@@ -3315,7 +3362,12 @@ static int mtk_hw_init(struct mtk_eth *e
- 		return 0;
- 	}
- 
--	mtk_hw_reset(eth);
-+	msleep(100);
-+
-+	if (reset)
-+		mtk_hw_warm_reset(eth);
-+	else
-+		mtk_hw_reset(eth);
- 
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
- 		/* Set FE to PDMAv2 if necessary */
-@@ -3506,7 +3558,7 @@ static void mtk_pending_work(struct work
- 	if (eth->dev->pins)
- 		pinctrl_select_state(eth->dev->pins->p,
- 				     eth->dev->pins->default_state);
--	mtk_hw_init(eth);
-+	mtk_hw_init(eth, true);
- 
- 	/* restart DMA and enable IRQs */
- 	for (i = 0; i < MTK_MAC_COUNT; i++) {
-@@ -4108,7 +4160,7 @@ static int mtk_probe(struct platform_dev
- 	eth->msg_enable = netif_msg_init(mtk_msg_level, MTK_DEFAULT_MSG_ENABLE);
- 	INIT_WORK(&eth->pending_work, mtk_pending_work);
- 
--	err = mtk_hw_init(eth);
-+	err = mtk_hw_init(eth, false);
- 	if (err)
- 		goto err_wed_exit;
- 
diff --git a/target/linux/generic/backport-6.1/729-20-v6.3-net-ethernet-mtk_eth_soc-align-reset-procedure-to-ve.patch b/target/linux/generic/backport-6.1/729-20-v6.3-net-ethernet-mtk_eth_soc-align-reset-procedure-to-ve.patch
deleted file mode 100644
index 7fdf7aa581ed..000000000000
--- a/target/linux/generic/backport-6.1/729-20-v6.3-net-ethernet-mtk_eth_soc-align-reset-procedure-to-ve.patch
+++ /dev/null
@@ -1,262 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 14 Jan 2023 18:01:30 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: align reset procedure to vendor
- sdk
-
-Avoid to power-down the ethernet chip during hw reset and align reset
-procedure to vendor sdk.
-
-Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -2843,14 +2843,29 @@ static void mtk_dma_free(struct mtk_eth
- 	kfree(eth->scratch_head);
- }
- 
-+static bool mtk_hw_reset_check(struct mtk_eth *eth)
-+{
-+	u32 val = mtk_r32(eth, MTK_INT_STATUS2);
-+
-+	return (val & MTK_FE_INT_FQ_EMPTY) || (val & MTK_FE_INT_RFIFO_UF) ||
-+	       (val & MTK_FE_INT_RFIFO_OV) || (val & MTK_FE_INT_TSO_FAIL) ||
-+	       (val & MTK_FE_INT_TSO_ALIGN) || (val & MTK_FE_INT_TSO_ILLEGAL);
-+}
-+
- static void mtk_tx_timeout(struct net_device *dev, unsigned int txqueue)
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
- 	struct mtk_eth *eth = mac->hw;
- 
-+	if (test_bit(MTK_RESETTING, &eth->state))
-+		return;
-+
-+	if (!mtk_hw_reset_check(eth))
-+		return;
-+
- 	eth->netdev[mac->id]->stats.tx_errors++;
--	netif_err(eth, tx_err, dev,
--		  "transmit timed out\n");
-+	netif_err(eth, tx_err, dev, "transmit timed out\n");
-+
- 	schedule_work(&eth->pending_work);
- }
- 
-@@ -3330,15 +3345,17 @@ static int mtk_hw_init(struct mtk_eth *e
- 	const struct mtk_reg_map *reg_map = eth->soc->reg_map;
- 	int i, val, ret;
- 
--	if (test_and_set_bit(MTK_HW_INIT, &eth->state))
-+	if (!reset && test_and_set_bit(MTK_HW_INIT, &eth->state))
- 		return 0;
- 
--	pm_runtime_enable(eth->dev);
--	pm_runtime_get_sync(eth->dev);
-+	if (!reset) {
-+		pm_runtime_enable(eth->dev);
-+		pm_runtime_get_sync(eth->dev);
- 
--	ret = mtk_clk_enable(eth);
--	if (ret)
--		goto err_disable_pm;
-+		ret = mtk_clk_enable(eth);
-+		if (ret)
-+			goto err_disable_pm;
-+	}
- 
- 	if (eth->ethsys)
- 		regmap_update_bits(eth->ethsys, ETHSYS_DMA_AG_MAP, dma_mask,
-@@ -3467,8 +3484,10 @@ static int mtk_hw_init(struct mtk_eth *e
- 	return 0;
- 
- err_disable_pm:
--	pm_runtime_put_sync(eth->dev);
--	pm_runtime_disable(eth->dev);
-+	if (!reset) {
-+		pm_runtime_put_sync(eth->dev);
-+		pm_runtime_disable(eth->dev);
-+	}
- 
- 	return ret;
- }
-@@ -3530,30 +3549,53 @@ static int mtk_do_ioctl(struct net_devic
- 	return -EOPNOTSUPP;
- }
- 
-+static void mtk_prepare_for_reset(struct mtk_eth *eth)
-+{
-+	u32 val;
-+	int i;
-+
-+	/* disabe FE P3 and P4 */
-+	val = mtk_r32(eth, MTK_FE_GLO_CFG) | MTK_FE_LINK_DOWN_P3;
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+		val |= MTK_FE_LINK_DOWN_P4;
-+	mtk_w32(eth, val, MTK_FE_GLO_CFG);
-+
-+	/* adjust PPE configurations to prepare for reset */
-+	for (i = 0; i < ARRAY_SIZE(eth->ppe); i++)
-+		mtk_ppe_prepare_reset(eth->ppe[i]);
-+
-+	/* disable NETSYS interrupts */
-+	mtk_w32(eth, 0, MTK_FE_INT_ENABLE);
-+
-+	/* force link down GMAC */
-+	for (i = 0; i < 2; i++) {
-+		val = mtk_r32(eth, MTK_MAC_MCR(i)) & ~MAC_MCR_FORCE_LINK;
-+		mtk_w32(eth, val, MTK_MAC_MCR(i));
-+	}
-+}
-+
- static void mtk_pending_work(struct work_struct *work)
- {
- 	struct mtk_eth *eth = container_of(work, struct mtk_eth, pending_work);
--	int err, i;
- 	unsigned long restart = 0;
-+	u32 val;
-+	int i;
- 
- 	rtnl_lock();
--
--	dev_dbg(eth->dev, "[%s][%d] reset\n", __func__, __LINE__);
- 	set_bit(MTK_RESETTING, &eth->state);
- 
-+	mtk_prepare_for_reset(eth);
-+
- 	/* stop all devices to make sure that dma is properly shut down */
- 	for (i = 0; i < MTK_MAC_COUNT; i++) {
--		if (!eth->netdev[i])
-+		if (!eth->netdev[i] || !netif_running(eth->netdev[i]))
- 			continue;
-+
- 		mtk_stop(eth->netdev[i]);
- 		__set_bit(i, &restart);
- 	}
--	dev_dbg(eth->dev, "[%s][%d] mtk_stop ends\n", __func__, __LINE__);
- 
--	/* restart underlying hardware such as power, clock, pin mux
--	 * and the connected phy
--	 */
--	mtk_hw_deinit(eth);
-+	usleep_range(15000, 16000);
- 
- 	if (eth->dev->pins)
- 		pinctrl_select_state(eth->dev->pins->p,
-@@ -3564,15 +3606,19 @@ static void mtk_pending_work(struct work
- 	for (i = 0; i < MTK_MAC_COUNT; i++) {
- 		if (!test_bit(i, &restart))
- 			continue;
--		err = mtk_open(eth->netdev[i]);
--		if (err) {
-+
-+		if (mtk_open(eth->netdev[i])) {
- 			netif_alert(eth, ifup, eth->netdev[i],
--			      "Driver up/down cycle failed, closing device.\n");
-+				    "Driver up/down cycle failed\n");
- 			dev_close(eth->netdev[i]);
- 		}
- 	}
- 
--	dev_dbg(eth->dev, "[%s][%d] reset done\n", __func__, __LINE__);
-+	/* enabe FE P3 and P4 */
-+	val = mtk_r32(eth, MTK_FE_GLO_CFG) & ~MTK_FE_LINK_DOWN_P3;
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+		val &= ~MTK_FE_LINK_DOWN_P4;
-+	mtk_w32(eth, val, MTK_FE_GLO_CFG);
- 
- 	clear_bit(MTK_RESETTING, &eth->state);
- 
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -72,12 +72,24 @@
- #define	MTK_HW_LRO_REPLACE_DELTA	1000
- #define	MTK_HW_LRO_SDL_REMAIN_ROOM	1522
- 
-+/* Frame Engine Global Configuration */
-+#define MTK_FE_GLO_CFG		0x00
-+#define MTK_FE_LINK_DOWN_P3	BIT(11)
-+#define MTK_FE_LINK_DOWN_P4	BIT(12)
-+
- /* Frame Engine Global Reset Register */
- #define MTK_RST_GL		0x04
- #define RST_GL_PSE		BIT(0)
- 
- /* Frame Engine Interrupt Status Register */
- #define MTK_INT_STATUS2		0x08
-+#define MTK_FE_INT_ENABLE	0x0c
-+#define MTK_FE_INT_FQ_EMPTY	BIT(8)
-+#define MTK_FE_INT_TSO_FAIL	BIT(12)
-+#define MTK_FE_INT_TSO_ILLEGAL	BIT(13)
-+#define MTK_FE_INT_TSO_ALIGN	BIT(14)
-+#define MTK_FE_INT_RFIFO_OV	BIT(18)
-+#define MTK_FE_INT_RFIFO_UF	BIT(19)
- #define MTK_GDM1_AF		BIT(28)
- #define MTK_GDM2_AF		BIT(29)
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -710,6 +710,33 @@ int mtk_foe_entry_idle_time(struct mtk_p
- 	return __mtk_foe_entry_idle_time(ppe, entry->data.ib1);
- }
- 
-+int mtk_ppe_prepare_reset(struct mtk_ppe *ppe)
-+{
-+	if (!ppe)
-+		return -EINVAL;
-+
-+	/* disable KA */
-+	ppe_clear(ppe, MTK_PPE_TB_CFG, MTK_PPE_TB_CFG_KEEPALIVE);
-+	ppe_clear(ppe, MTK_PPE_BIND_LMT1, MTK_PPE_NTU_KEEPALIVE);
-+	ppe_w32(ppe, MTK_PPE_KEEPALIVE, 0);
-+	usleep_range(10000, 11000);
-+
-+	/* set KA timer to maximum */
-+	ppe_set(ppe, MTK_PPE_BIND_LMT1, MTK_PPE_NTU_KEEPALIVE);
-+	ppe_w32(ppe, MTK_PPE_KEEPALIVE, 0xffffffff);
-+
-+	/* set KA tick select */
-+	ppe_set(ppe, MTK_PPE_TB_CFG, MTK_PPE_TB_TICK_SEL);
-+	ppe_set(ppe, MTK_PPE_TB_CFG, MTK_PPE_TB_CFG_KEEPALIVE);
-+	usleep_range(10000, 11000);
-+
-+	/* disable scan mode */
-+	ppe_clear(ppe, MTK_PPE_TB_CFG, MTK_PPE_TB_CFG_SCAN_MODE);
-+	usleep_range(10000, 11000);
-+
-+	return mtk_ppe_wait_busy(ppe);
-+}
-+
- struct mtk_ppe *mtk_ppe_init(struct mtk_eth *eth, void __iomem *base,
- 			     int version, int index)
- {
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -306,6 +306,7 @@ struct mtk_ppe *mtk_ppe_init(struct mtk_
- void mtk_ppe_deinit(struct mtk_eth *eth);
- void mtk_ppe_start(struct mtk_ppe *ppe);
- int mtk_ppe_stop(struct mtk_ppe *ppe);
-+int mtk_ppe_prepare_reset(struct mtk_ppe *ppe);
- 
- void __mtk_ppe_check_skb(struct mtk_ppe *ppe, struct sk_buff *skb, u16 hash);
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-@@ -58,6 +58,12 @@
- #define MTK_PPE_TB_CFG_SCAN_MODE		GENMASK(17, 16)
- #define MTK_PPE_TB_CFG_HASH_DEBUG		GENMASK(19, 18)
- #define MTK_PPE_TB_CFG_INFO_SEL			BIT(20)
-+#define MTK_PPE_TB_TICK_SEL			BIT(24)
-+
-+#define MTK_PPE_BIND_LMT1			0x230
-+#define MTK_PPE_NTU_KEEPALIVE			GENMASK(23, 16)
-+
-+#define MTK_PPE_KEEPALIVE			0x234
- 
- enum {
- 	MTK_PPE_SCAN_MODE_DISABLED,
diff --git a/target/linux/generic/backport-6.1/729-21-v6.3-net-ethernet-mtk_eth_soc-add-dma-checks-to-mtk_hw_re.patch b/target/linux/generic/backport-6.1/729-21-v6.3-net-ethernet-mtk_eth_soc-add-dma-checks-to-mtk_hw_re.patch
deleted file mode 100644
index a77f3da7f8cd..000000000000
--- a/target/linux/generic/backport-6.1/729-21-v6.3-net-ethernet-mtk_eth_soc-add-dma-checks-to-mtk_hw_re.patch
+++ /dev/null
@@ -1,249 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 14 Jan 2023 18:01:31 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: add dma checks to
- mtk_hw_reset_check
-
-Introduce mtk_hw_check_dma_hang routine to monitor possible dma hangs.
-
-Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -50,6 +50,7 @@ static const struct mtk_reg_map mtk_reg_
- 		.delay_irq	= 0x0a0c,
- 		.irq_status	= 0x0a20,
- 		.irq_mask	= 0x0a28,
-+		.adma_rx_dbg0	= 0x0a38,
- 		.int_grp	= 0x0a50,
- 	},
- 	.qdma = {
-@@ -79,6 +80,8 @@ static const struct mtk_reg_map mtk_reg_
- 		[0]		= 0x2800,
- 		[1]		= 0x2c00,
- 	},
-+	.pse_iq_sta		= 0x0110,
-+	.pse_oq_sta		= 0x0118,
- };
- 
- static const struct mtk_reg_map mt7628_reg_map = {
-@@ -109,6 +112,7 @@ static const struct mtk_reg_map mt7986_r
- 		.delay_irq	= 0x620c,
- 		.irq_status	= 0x6220,
- 		.irq_mask	= 0x6228,
-+		.adma_rx_dbg0	= 0x6238,
- 		.int_grp	= 0x6250,
- 	},
- 	.qdma = {
-@@ -138,6 +142,8 @@ static const struct mtk_reg_map mt7986_r
- 		[0]		= 0x4800,
- 		[1]		= 0x4c00,
- 	},
-+	.pse_iq_sta		= 0x0180,
-+	.pse_oq_sta		= 0x01a0,
- };
- 
- /* strings used by ethtool */
-@@ -3338,6 +3344,102 @@ static void mtk_hw_warm_reset(struct mtk
- 			val, rst_mask);
- }
- 
-+static bool mtk_hw_check_dma_hang(struct mtk_eth *eth)
-+{
-+	const struct mtk_reg_map *reg_map = eth->soc->reg_map;
-+	bool gmac1_tx, gmac2_tx, gdm1_tx, gdm2_tx;
-+	bool oq_hang, cdm1_busy, adma_busy;
-+	bool wtx_busy, cdm_full, oq_free;
-+	u32 wdidx, val, gdm1_fc, gdm2_fc;
-+	bool qfsm_hang, qfwd_hang;
-+	bool ret = false;
-+
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
-+		return false;
-+
-+	/* WDMA sanity checks */
-+	wdidx = mtk_r32(eth, reg_map->wdma_base[0] + 0xc);
-+
-+	val = mtk_r32(eth, reg_map->wdma_base[0] + 0x204);
-+	wtx_busy = FIELD_GET(MTK_TX_DMA_BUSY, val);
-+
-+	val = mtk_r32(eth, reg_map->wdma_base[0] + 0x230);
-+	cdm_full = !FIELD_GET(MTK_CDM_TXFIFO_RDY, val);
-+
-+	oq_free  = (!(mtk_r32(eth, reg_map->pse_oq_sta) & GENMASK(24, 16)) &&
-+		    !(mtk_r32(eth, reg_map->pse_oq_sta + 0x4) & GENMASK(8, 0)) &&
-+		    !(mtk_r32(eth, reg_map->pse_oq_sta + 0x10) & GENMASK(24, 16)));
-+
-+	if (wdidx == eth->reset.wdidx && wtx_busy && cdm_full && oq_free) {
-+		if (++eth->reset.wdma_hang_count > 2) {
-+			eth->reset.wdma_hang_count = 0;
-+			ret = true;
-+		}
-+		goto out;
-+	}
-+
-+	/* QDMA sanity checks */
-+	qfsm_hang = !!mtk_r32(eth, reg_map->qdma.qtx_cfg + 0x234);
-+	qfwd_hang = !mtk_r32(eth, reg_map->qdma.qtx_cfg + 0x308);
-+
-+	gdm1_tx = FIELD_GET(GENMASK(31, 16), mtk_r32(eth, MTK_FE_GDM1_FSM)) > 0;
-+	gdm2_tx = FIELD_GET(GENMASK(31, 16), mtk_r32(eth, MTK_FE_GDM2_FSM)) > 0;
-+	gmac1_tx = FIELD_GET(GENMASK(31, 24), mtk_r32(eth, MTK_MAC_FSM(0))) != 1;
-+	gmac2_tx = FIELD_GET(GENMASK(31, 24), mtk_r32(eth, MTK_MAC_FSM(1))) != 1;
-+	gdm1_fc = mtk_r32(eth, reg_map->gdm1_cnt + 0x24);
-+	gdm2_fc = mtk_r32(eth, reg_map->gdm1_cnt + 0x64);
-+
-+	if (qfsm_hang && qfwd_hang &&
-+	    ((gdm1_tx && gmac1_tx && gdm1_fc < 1) ||
-+	     (gdm2_tx && gmac2_tx && gdm2_fc < 1))) {
-+		if (++eth->reset.qdma_hang_count > 2) {
-+			eth->reset.qdma_hang_count = 0;
-+			ret = true;
-+		}
-+		goto out;
-+	}
-+
-+	/* ADMA sanity checks */
-+	oq_hang = !!(mtk_r32(eth, reg_map->pse_oq_sta) & GENMASK(8, 0));
-+	cdm1_busy = !!(mtk_r32(eth, MTK_FE_CDM1_FSM) & GENMASK(31, 16));
-+	adma_busy = !(mtk_r32(eth, reg_map->pdma.adma_rx_dbg0) & GENMASK(4, 0)) &&
-+		    !(mtk_r32(eth, reg_map->pdma.adma_rx_dbg0) & BIT(6));
-+
-+	if (oq_hang && cdm1_busy && adma_busy) {
-+		if (++eth->reset.adma_hang_count > 2) {
-+			eth->reset.adma_hang_count = 0;
-+			ret = true;
-+		}
-+		goto out;
-+	}
-+
-+	eth->reset.wdma_hang_count = 0;
-+	eth->reset.qdma_hang_count = 0;
-+	eth->reset.adma_hang_count = 0;
-+out:
-+	eth->reset.wdidx = wdidx;
-+
-+	return ret;
-+}
-+
-+static void mtk_hw_reset_monitor_work(struct work_struct *work)
-+{
-+	struct delayed_work *del_work = to_delayed_work(work);
-+	struct mtk_eth *eth = container_of(del_work, struct mtk_eth,
-+					   reset.monitor_work);
-+
-+	if (test_bit(MTK_RESETTING, &eth->state))
-+		goto out;
-+
-+	/* DMA stuck checks */
-+	if (mtk_hw_check_dma_hang(eth))
-+		schedule_work(&eth->pending_work);
-+
-+out:
-+	schedule_delayed_work(&eth->reset.monitor_work,
-+			      MTK_DMA_MONITOR_TIMEOUT);
-+}
-+
- static int mtk_hw_init(struct mtk_eth *eth, bool reset)
- {
- 	u32 dma_mask = ETHSYS_DMA_AG_MAP_PDMA | ETHSYS_DMA_AG_MAP_QDMA |
-@@ -3656,6 +3758,7 @@ static int mtk_cleanup(struct mtk_eth *e
- 	mtk_unreg_dev(eth);
- 	mtk_free_dev(eth);
- 	cancel_work_sync(&eth->pending_work);
-+	cancel_delayed_work_sync(&eth->reset.monitor_work);
- 
- 	return 0;
- }
-@@ -4093,6 +4196,7 @@ static int mtk_probe(struct platform_dev
- 
- 	eth->rx_dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
- 	INIT_WORK(&eth->rx_dim.work, mtk_dim_rx);
-+	INIT_DELAYED_WORK(&eth->reset.monitor_work, mtk_hw_reset_monitor_work);
- 
- 	eth->tx_dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE;
- 	INIT_WORK(&eth->tx_dim.work, mtk_dim_tx);
-@@ -4295,6 +4399,8 @@ static int mtk_probe(struct platform_dev
- 	netif_napi_add(&eth->dummy_dev, &eth->rx_napi, mtk_napi_rx);
- 
- 	platform_set_drvdata(pdev, eth);
-+	schedule_delayed_work(&eth->reset.monitor_work,
-+			      MTK_DMA_MONITOR_TIMEOUT);
- 
- 	return 0;
- 
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -257,6 +257,8 @@
- 
- #define MTK_RX_DONE_INT_V2	BIT(14)
- 
-+#define MTK_CDM_TXFIFO_RDY	BIT(7)
-+
- /* QDMA Interrupt grouping registers */
- #define MTK_RLS_DONE_INT	BIT(0)
- 
-@@ -542,6 +544,17 @@
- #define MT7628_SDM_RBCNT	(MT7628_SDM_OFFSET + 0x10c)
- #define MT7628_SDM_CS_ERR	(MT7628_SDM_OFFSET + 0x110)
- 
-+#define MTK_FE_CDM1_FSM		0x220
-+#define MTK_FE_CDM2_FSM		0x224
-+#define MTK_FE_CDM3_FSM		0x238
-+#define MTK_FE_CDM4_FSM		0x298
-+#define MTK_FE_CDM5_FSM		0x318
-+#define MTK_FE_CDM6_FSM		0x328
-+#define MTK_FE_GDM1_FSM		0x228
-+#define MTK_FE_GDM2_FSM		0x22C
-+
-+#define MTK_MAC_FSM(x)		(0x1010C + ((x) * 0x100))
-+
- struct mtk_rx_dma {
- 	unsigned int rxd1;
- 	unsigned int rxd2;
-@@ -938,6 +951,7 @@ struct mtk_reg_map {
- 		u32	delay_irq;	/* delay interrupt */
- 		u32	irq_status;	/* interrupt status */
- 		u32	irq_mask;	/* interrupt mask */
-+		u32	adma_rx_dbg0;
- 		u32	int_grp;
- 	} pdma;
- 	struct {
-@@ -964,6 +978,8 @@ struct mtk_reg_map {
- 	u32	gdma_to_ppe;
- 	u32	ppe_base;
- 	u32	wdma_base[2];
-+	u32	pse_iq_sta;
-+	u32	pse_oq_sta;
- };
- 
- /* struct mtk_eth_data -	This is the structure holding all differences
-@@ -1006,6 +1022,8 @@ struct mtk_soc_data {
- 	} txrx;
- };
- 
-+#define MTK_DMA_MONITOR_TIMEOUT		msecs_to_jiffies(1000)
-+
- /* currently no SoC has more than 2 macs */
- #define MTK_MAX_DEVS			2
- 
-@@ -1128,6 +1146,14 @@ struct mtk_eth {
- 	struct rhashtable		flow_table;
- 
- 	struct bpf_prog			__rcu *prog;
-+
-+	struct {
-+		struct delayed_work monitor_work;
-+		u32 wdidx;
-+		u8 wdma_hang_count;
-+		u8 qdma_hang_count;
-+		u8 adma_hang_count;
-+	} reset;
- };
- 
- /* struct mtk_mac -	the structure that holds the info about the MACs of the
diff --git a/target/linux/generic/backport-6.1/729-22-v6.3-net-ethernet-mtk_wed-add-reset-reset_complete-callba.patch b/target/linux/generic/backport-6.1/729-22-v6.3-net-ethernet-mtk_wed-add-reset-reset_complete-callba.patch
deleted file mode 100644
index 3f047da75892..000000000000
--- a/target/linux/generic/backport-6.1/729-22-v6.3-net-ethernet-mtk_wed-add-reset-reset_complete-callba.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 14 Jan 2023 18:01:32 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: add reset/reset_complete callbacks
-
-Introduce reset and reset_complete wlan callback to schedule WLAN driver
-reset when ethernet/wed driver is resetting.
-
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -3687,6 +3687,11 @@ static void mtk_pending_work(struct work
- 	set_bit(MTK_RESETTING, &eth->state);
- 
- 	mtk_prepare_for_reset(eth);
-+	mtk_wed_fe_reset();
-+	/* Run again reset preliminary configuration in order to avoid any
-+	 * possible race during FE reset since it can run releasing RTNL lock.
-+	 */
-+	mtk_prepare_for_reset(eth);
- 
- 	/* stop all devices to make sure that dma is properly shut down */
- 	for (i = 0; i < MTK_MAC_COUNT; i++) {
-@@ -3724,6 +3729,8 @@ static void mtk_pending_work(struct work
- 
- 	clear_bit(MTK_RESETTING, &eth->state);
- 
-+	mtk_wed_fe_reset_complete();
-+
- 	rtnl_unlock();
- }
- 
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -205,6 +205,48 @@ mtk_wed_wo_reset(struct mtk_wed_device *
- 	iounmap(reg);
- }
- 
-+void mtk_wed_fe_reset(void)
-+{
-+	int i;
-+
-+	mutex_lock(&hw_lock);
-+
-+	for (i = 0; i < ARRAY_SIZE(hw_list); i++) {
-+		struct mtk_wed_hw *hw = hw_list[i];
-+		struct mtk_wed_device *dev = hw->wed_dev;
-+		int err;
-+
-+		if (!dev || !dev->wlan.reset)
-+			continue;
-+
-+		/* reset callback blocks until WLAN reset is completed */
-+		err = dev->wlan.reset(dev);
-+		if (err)
-+			dev_err(dev->dev, "wlan reset failed: %d\n", err);
-+	}
-+
-+	mutex_unlock(&hw_lock);
-+}
-+
-+void mtk_wed_fe_reset_complete(void)
-+{
-+	int i;
-+
-+	mutex_lock(&hw_lock);
-+
-+	for (i = 0; i < ARRAY_SIZE(hw_list); i++) {
-+		struct mtk_wed_hw *hw = hw_list[i];
-+		struct mtk_wed_device *dev = hw->wed_dev;
-+
-+		if (!dev || !dev->wlan.reset_complete)
-+			continue;
-+
-+		dev->wlan.reset_complete(dev);
-+	}
-+
-+	mutex_unlock(&hw_lock);
-+}
-+
- static struct mtk_wed_hw *
- mtk_wed_assign(struct mtk_wed_device *dev)
- {
---- a/drivers/net/ethernet/mediatek/mtk_wed.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.h
-@@ -128,6 +128,8 @@ void mtk_wed_add_hw(struct device_node *
- void mtk_wed_exit(void);
- int mtk_wed_flow_add(int index);
- void mtk_wed_flow_remove(int index);
-+void mtk_wed_fe_reset(void);
-+void mtk_wed_fe_reset_complete(void);
- #else
- static inline void
- mtk_wed_add_hw(struct device_node *np, struct mtk_eth *eth,
-@@ -147,6 +149,13 @@ static inline void mtk_wed_flow_remove(i
- {
- }
- 
-+static inline void mtk_wed_fe_reset(void)
-+{
-+}
-+
-+static inline void mtk_wed_fe_reset_complete(void)
-+{
-+}
- #endif
- 
- #ifdef CONFIG_DEBUG_FS
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -151,6 +151,8 @@ struct mtk_wed_device {
- 		void (*release_rx_buf)(struct mtk_wed_device *wed);
- 		void (*update_wo_rx_stats)(struct mtk_wed_device *wed,
- 					   struct mtk_wed_wo_rx_stats *stats);
-+		int (*reset)(struct mtk_wed_device *wed);
-+		void (*reset_complete)(struct mtk_wed_device *wed);
- 	} wlan;
- #endif
- };
diff --git a/target/linux/generic/backport-6.1/729-23-v6.3-net-ethernet-mtk_wed-add-reset-to-rx_ring_setup-call.patch b/target/linux/generic/backport-6.1/729-23-v6.3-net-ethernet-mtk_wed-add-reset-to-rx_ring_setup-call.patch
deleted file mode 100644
index c63628da99da..000000000000
--- a/target/linux/generic/backport-6.1/729-23-v6.3-net-ethernet-mtk_wed-add-reset-to-rx_ring_setup-call.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 5 Dec 2022 12:34:42 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: add reset to rx_ring_setup callback
-
-This patch adds reset parameter to mtk_wed_rx_ring_setup signature
-in order to align rx_ring_setup callback to tx_ring_setup one introduced
-in 'commit 23dca7a90017 ("net: ethernet: mtk_wed: add reset to
-tx_ring_setup callback")'
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
-Link: https://lore.kernel.org/r/29c6e7a5469e784406cf3e2920351d1207713d05.1670239984.git.lorenzo@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -1252,7 +1252,8 @@ mtk_wed_wdma_rx_ring_setup(struct mtk_we
- }
- 
- static int
--mtk_wed_wdma_tx_ring_setup(struct mtk_wed_device *dev, int idx, int size)
-+mtk_wed_wdma_tx_ring_setup(struct mtk_wed_device *dev, int idx, int size,
-+			   bool reset)
- {
- 	u32 desc_size = sizeof(struct mtk_wdma_desc) * dev->hw->version;
- 	struct mtk_wed_ring *wdma;
-@@ -1261,8 +1262,8 @@ mtk_wed_wdma_tx_ring_setup(struct mtk_we
- 		return -EINVAL;
- 
- 	wdma = &dev->tx_wdma[idx];
--	if (mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE, desc_size,
--			       true))
-+	if (!reset && mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE,
-+					 desc_size, true))
- 		return -ENOMEM;
- 
- 	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_BASE,
-@@ -1272,6 +1273,9 @@ mtk_wed_wdma_tx_ring_setup(struct mtk_we
- 	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_CPU_IDX, 0);
- 	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_DMA_IDX, 0);
- 
-+	if (reset)
-+		mtk_wed_ring_reset(wdma, MTK_WED_WDMA_RING_SIZE, true);
-+
- 	if (!idx)  {
- 		wed_w32(dev, MTK_WED_WDMA_RING_TX + MTK_WED_RING_OFS_BASE,
- 			wdma->desc_phys);
-@@ -1611,18 +1615,20 @@ mtk_wed_txfree_ring_setup(struct mtk_wed
- }
- 
- static int
--mtk_wed_rx_ring_setup(struct mtk_wed_device *dev, int idx, void __iomem *regs)
-+mtk_wed_rx_ring_setup(struct mtk_wed_device *dev, int idx, void __iomem *regs,
-+		      bool reset)
- {
- 	struct mtk_wed_ring *ring = &dev->rx_ring[idx];
- 
- 	if (WARN_ON(idx >= ARRAY_SIZE(dev->rx_ring)))
- 		return -EINVAL;
- 
--	if (mtk_wed_ring_alloc(dev, ring, MTK_WED_RX_RING_SIZE,
--			       sizeof(*ring->desc), false))
-+	if (!reset && mtk_wed_ring_alloc(dev, ring, MTK_WED_RX_RING_SIZE,
-+					 sizeof(*ring->desc), false))
- 		return -ENOMEM;
- 
--	if (mtk_wed_wdma_tx_ring_setup(dev, idx, MTK_WED_WDMA_RING_SIZE))
-+	if (mtk_wed_wdma_tx_ring_setup(dev, idx, MTK_WED_WDMA_RING_SIZE,
-+				       reset))
- 		return -ENOMEM;
- 
- 	ring->reg_base = MTK_WED_RING_RX_DATA(idx);
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -162,7 +162,7 @@ struct mtk_wed_ops {
- 	int (*tx_ring_setup)(struct mtk_wed_device *dev, int ring,
- 			     void __iomem *regs, bool reset);
- 	int (*rx_ring_setup)(struct mtk_wed_device *dev, int ring,
--			     void __iomem *regs);
-+			     void __iomem *regs, bool reset);
- 	int (*txfree_ring_setup)(struct mtk_wed_device *dev,
- 				 void __iomem *regs);
- 	int (*msg_update)(struct mtk_wed_device *dev, int cmd_id,
-@@ -230,8 +230,8 @@ mtk_wed_get_rx_capa(struct mtk_wed_devic
- 	(_dev)->ops->irq_get(_dev, _mask)
- #define mtk_wed_device_irq_set_mask(_dev, _mask) \
- 	(_dev)->ops->irq_set_mask(_dev, _mask)
--#define mtk_wed_device_rx_ring_setup(_dev, _ring, _regs) \
--	(_dev)->ops->rx_ring_setup(_dev, _ring, _regs)
-+#define mtk_wed_device_rx_ring_setup(_dev, _ring, _regs, _reset) \
-+	(_dev)->ops->rx_ring_setup(_dev, _ring, _regs, _reset)
- #define mtk_wed_device_ppe_check(_dev, _skb, _reason, _hash) \
- 	(_dev)->ops->ppe_check(_dev, _skb, _reason, _hash)
- #define mtk_wed_device_update_msg(_dev, _id, _msg, _len) \
-@@ -251,7 +251,7 @@ static inline bool mtk_wed_device_active
- #define mtk_wed_device_reg_write(_dev, _reg, _val) do {} while (0)
- #define mtk_wed_device_irq_get(_dev, _mask) 0
- #define mtk_wed_device_irq_set_mask(_dev, _mask) do {} while (0)
--#define mtk_wed_device_rx_ring_setup(_dev, _ring, _regs) -ENODEV
-+#define mtk_wed_device_rx_ring_setup(_dev, _ring, _regs, _reset) -ENODEV
- #define mtk_wed_device_ppe_check(_dev, _skb, _reason, _hash)  do {} while (0)
- #define mtk_wed_device_update_msg(_dev, _id, _msg, _len) -ENODEV
- #define mtk_wed_device_stop(_dev) do {} while (0)
diff --git a/target/linux/generic/backport-6.1/730-01-v6.3-net-ethernet-mtk_eth_soc-account-for-vlan-in-rx-head.patch b/target/linux/generic/backport-6.1/730-01-v6.3-net-ethernet-mtk_eth_soc-account-for-vlan-in-rx-head.patch
deleted file mode 100644
index 45af898cf003..000000000000
--- a/target/linux/generic/backport-6.1/730-01-v6.3-net-ethernet-mtk_eth_soc-account-for-vlan-in-rx-head.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 27 Oct 2022 19:50:31 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: account for vlan in rx
- header length
-
-The network stack assumes that devices can handle an extra VLAN tag without
-increasing the MTU
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -29,7 +29,7 @@
- #define MTK_TX_DMA_BUF_LEN_V2	0xffff
- #define MTK_DMA_SIZE		512
- #define MTK_MAC_COUNT		2
--#define MTK_RX_ETH_HLEN		(ETH_HLEN + ETH_FCS_LEN)
-+#define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + ETH_FCS_LEN)
- #define MTK_RX_HLEN		(NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
- #define MTK_DMA_DUMMY_DESC	0xffffffff
- #define MTK_DEFAULT_MSG_ENABLE	(NETIF_MSG_DRV | \
diff --git a/target/linux/generic/backport-6.1/730-02-v6.3-net-ethernet-mtk_eth_soc-increase-tx-ring-side-for-Q.patch b/target/linux/generic/backport-6.1/730-02-v6.3-net-ethernet-mtk_eth_soc-increase-tx-ring-side-for-Q.patch
deleted file mode 100644
index 41d1bceac447..000000000000
--- a/target/linux/generic/backport-6.1/730-02-v6.3-net-ethernet-mtk_eth_soc-increase-tx-ring-side-for-Q.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 27 Oct 2022 19:53:57 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: increase tx ring side for
- QDMA devices
-
-In order to use the hardware traffic shaper feature, a larger tx ring is
-needed, especially for the scratch ring, which the hardware shaper uses to
-reorder packets.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -943,7 +943,7 @@ static int mtk_init_fq_dma(struct mtk_et
- {
- 	const struct mtk_soc_data *soc = eth->soc;
- 	dma_addr_t phy_ring_tail;
--	int cnt = MTK_DMA_SIZE;
-+	int cnt = MTK_QDMA_RING_SIZE;
- 	dma_addr_t dma_addr;
- 	int i;
- 
-@@ -2207,19 +2207,25 @@ static int mtk_tx_alloc(struct mtk_eth *
- 	struct mtk_tx_ring *ring = &eth->tx_ring;
- 	int i, sz = soc->txrx.txd_size;
- 	struct mtk_tx_dma_v2 *txd;
-+	int ring_size;
- 
--	ring->buf = kcalloc(MTK_DMA_SIZE, sizeof(*ring->buf),
-+	if (MTK_HAS_CAPS(soc->caps, MTK_QDMA))
-+		ring_size = MTK_QDMA_RING_SIZE;
-+	else
-+		ring_size = MTK_DMA_SIZE;
-+
-+	ring->buf = kcalloc(ring_size, sizeof(*ring->buf),
- 			       GFP_KERNEL);
- 	if (!ring->buf)
- 		goto no_tx_mem;
- 
--	ring->dma = dma_alloc_coherent(eth->dma_dev, MTK_DMA_SIZE * sz,
-+	ring->dma = dma_alloc_coherent(eth->dma_dev, ring_size * sz,
- 				       &ring->phys, GFP_KERNEL);
- 	if (!ring->dma)
- 		goto no_tx_mem;
- 
--	for (i = 0; i < MTK_DMA_SIZE; i++) {
--		int next = (i + 1) % MTK_DMA_SIZE;
-+	for (i = 0; i < ring_size; i++) {
-+		int next = (i + 1) % ring_size;
- 		u32 next_ptr = ring->phys + next * sz;
- 
- 		txd = ring->dma + i * sz;
-@@ -2239,22 +2245,22 @@ static int mtk_tx_alloc(struct mtk_eth *
- 	 * descriptors in ring->dma_pdma.
- 	 */
- 	if (!MTK_HAS_CAPS(soc->caps, MTK_QDMA)) {
--		ring->dma_pdma = dma_alloc_coherent(eth->dma_dev, MTK_DMA_SIZE * sz,
-+		ring->dma_pdma = dma_alloc_coherent(eth->dma_dev, ring_size * sz,
- 						    &ring->phys_pdma, GFP_KERNEL);
- 		if (!ring->dma_pdma)
- 			goto no_tx_mem;
- 
--		for (i = 0; i < MTK_DMA_SIZE; i++) {
-+		for (i = 0; i < ring_size; i++) {
- 			ring->dma_pdma[i].txd2 = TX_DMA_DESP2_DEF;
- 			ring->dma_pdma[i].txd4 = 0;
- 		}
- 	}
- 
--	ring->dma_size = MTK_DMA_SIZE;
--	atomic_set(&ring->free_count, MTK_DMA_SIZE - 2);
-+	ring->dma_size = ring_size;
-+	atomic_set(&ring->free_count, ring_size - 2);
- 	ring->next_free = ring->dma;
- 	ring->last_free = (void *)txd;
--	ring->last_free_ptr = (u32)(ring->phys + ((MTK_DMA_SIZE - 1) * sz));
-+	ring->last_free_ptr = (u32)(ring->phys + ((ring_size - 1) * sz));
- 	ring->thresh = MAX_SKB_FRAGS;
- 
- 	/* make sure that all changes to the dma ring are flushed before we
-@@ -2266,14 +2272,14 @@ static int mtk_tx_alloc(struct mtk_eth *
- 		mtk_w32(eth, ring->phys, soc->reg_map->qdma.ctx_ptr);
- 		mtk_w32(eth, ring->phys, soc->reg_map->qdma.dtx_ptr);
- 		mtk_w32(eth,
--			ring->phys + ((MTK_DMA_SIZE - 1) * sz),
-+			ring->phys + ((ring_size - 1) * sz),
- 			soc->reg_map->qdma.crx_ptr);
- 		mtk_w32(eth, ring->last_free_ptr, soc->reg_map->qdma.drx_ptr);
- 		mtk_w32(eth, (QDMA_RES_THRES << 8) | QDMA_RES_THRES,
- 			soc->reg_map->qdma.qtx_cfg);
- 	} else {
- 		mtk_w32(eth, ring->phys_pdma, MT7628_TX_BASE_PTR0);
--		mtk_w32(eth, MTK_DMA_SIZE, MT7628_TX_MAX_CNT0);
-+		mtk_w32(eth, ring_size, MT7628_TX_MAX_CNT0);
- 		mtk_w32(eth, 0, MT7628_TX_CTX_IDX0);
- 		mtk_w32(eth, MT7628_PST_DTX_IDX0, soc->reg_map->pdma.rst_idx);
- 	}
-@@ -2291,7 +2297,7 @@ static void mtk_tx_clean(struct mtk_eth
- 	int i;
- 
- 	if (ring->buf) {
--		for (i = 0; i < MTK_DMA_SIZE; i++)
-+		for (i = 0; i < ring->dma_size; i++)
- 			mtk_tx_unmap(eth, &ring->buf[i], NULL, false);
- 		kfree(ring->buf);
- 		ring->buf = NULL;
-@@ -2299,14 +2305,14 @@ static void mtk_tx_clean(struct mtk_eth
- 
- 	if (ring->dma) {
- 		dma_free_coherent(eth->dma_dev,
--				  MTK_DMA_SIZE * soc->txrx.txd_size,
-+				  ring->dma_size * soc->txrx.txd_size,
- 				  ring->dma, ring->phys);
- 		ring->dma = NULL;
- 	}
- 
- 	if (ring->dma_pdma) {
- 		dma_free_coherent(eth->dma_dev,
--				  MTK_DMA_SIZE * soc->txrx.txd_size,
-+				  ring->dma_size * soc->txrx.txd_size,
- 				  ring->dma_pdma, ring->phys_pdma);
- 		ring->dma_pdma = NULL;
- 	}
-@@ -2831,7 +2837,7 @@ static void mtk_dma_free(struct mtk_eth
- 			netdev_reset_queue(eth->netdev[i]);
- 	if (eth->scratch_ring) {
- 		dma_free_coherent(eth->dma_dev,
--				  MTK_DMA_SIZE * soc->txrx.txd_size,
-+				  MTK_QDMA_RING_SIZE * soc->txrx.txd_size,
- 				  eth->scratch_ring, eth->phy_scratch_ring);
- 		eth->scratch_ring = NULL;
- 		eth->phy_scratch_ring = 0;
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -27,6 +27,7 @@
- #define MTK_MAX_RX_LENGTH_2K	2048
- #define MTK_TX_DMA_BUF_LEN	0x3fff
- #define MTK_TX_DMA_BUF_LEN_V2	0xffff
-+#define MTK_QDMA_RING_SIZE	2048
- #define MTK_DMA_SIZE		512
- #define MTK_MAC_COUNT		2
- #define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + ETH_FCS_LEN)
diff --git a/target/linux/generic/backport-6.1/730-03-v6.3-net-ethernet-mtk_eth_soc-avoid-port_mg-assignment-on.patch b/target/linux/generic/backport-6.1/730-03-v6.3-net-ethernet-mtk_eth_soc-avoid-port_mg-assignment-on.patch
deleted file mode 100644
index c9823daa1d2e..000000000000
--- a/target/linux/generic/backport-6.1/730-03-v6.3-net-ethernet-mtk_eth_soc-avoid-port_mg-assignment-on.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 4 Nov 2022 19:49:08 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: avoid port_mg assignment on
- MT7622 and newer
-
-On newer chips, this field is unused and contains some bits related to queue
-assignment. Initialize it to 0 in those cases.
-Fix offload_version on MT7621 and MT7623, which still need the previous value.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4478,7 +4478,7 @@ static const struct mtk_soc_data mt7621_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7621_CLKS_BITMAP,
- 	.required_pctl = false,
--	.offload_version = 2,
-+	.offload_version = 1,
- 	.hash_offset = 2,
- 	.foe_entry_size = sizeof(struct mtk_foe_entry) - 16,
- 	.txrx = {
-@@ -4517,7 +4517,7 @@ static const struct mtk_soc_data mt7623_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7623_CLKS_BITMAP,
- 	.required_pctl = true,
--	.offload_version = 2,
-+	.offload_version = 1,
- 	.hash_offset = 2,
- 	.foe_entry_size = sizeof(struct mtk_foe_entry) - 16,
- 	.txrx = {
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -175,6 +175,8 @@ int mtk_foe_entry_prepare(struct mtk_eth
- 		val = FIELD_PREP(MTK_FOE_IB2_DEST_PORT_V2, pse_port) |
- 		      FIELD_PREP(MTK_FOE_IB2_PORT_AG_V2, 0xf);
- 	} else {
-+		int port_mg = eth->soc->offload_version > 1 ? 0 : 0x3f;
-+
- 		val = FIELD_PREP(MTK_FOE_IB1_STATE, MTK_FOE_STATE_BIND) |
- 		      FIELD_PREP(MTK_FOE_IB1_PACKET_TYPE, type) |
- 		      FIELD_PREP(MTK_FOE_IB1_UDP, l4proto == IPPROTO_UDP) |
-@@ -182,7 +184,7 @@ int mtk_foe_entry_prepare(struct mtk_eth
- 		entry->ib1 = val;
- 
- 		val = FIELD_PREP(MTK_FOE_IB2_DEST_PORT, pse_port) |
--		      FIELD_PREP(MTK_FOE_IB2_PORT_MG, 0x3f) |
-+		      FIELD_PREP(MTK_FOE_IB2_PORT_MG, port_mg) |
- 		      FIELD_PREP(MTK_FOE_IB2_PORT_AG, 0x1f);
- 	}
- 
diff --git a/target/linux/generic/backport-6.1/730-04-v6.3-net-ethernet-mtk_eth_soc-implement-multi-queue-suppo.patch b/target/linux/generic/backport-6.1/730-04-v6.3-net-ethernet-mtk_eth_soc-implement-multi-queue-suppo.patch
deleted file mode 100644
index 0d462b0c85ff..000000000000
--- a/target/linux/generic/backport-6.1/730-04-v6.3-net-ethernet-mtk_eth_soc-implement-multi-queue-suppo.patch
+++ /dev/null
@@ -1,654 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 27 Oct 2022 20:17:27 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: implement multi-queue
- support for per-port queues
-
-When sending traffic to multiple ports with different link speeds, queued
-packets to one port can drown out tx to other ports.
-In order to better handle transmission to multiple ports, use the hardware
-shaper feature to implement weighted fair queueing between ports.
-Weight and maximum rate are automatically adjusted based on the link speed
-of the port.
-The first 3 queues are unrestricted and reserved for non-DSA direct tx on
-GMAC ports. The following queues are automatically assigned by the MTK DSA
-tag driver based on the target port number.
-The PPE offload code configures the queues for offloaded traffic in the same
-way.
-This feature is only supported on devices supporting QDMA. All queues still
-share the same DMA ring and descriptor pool.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -55,6 +55,7 @@ static const struct mtk_reg_map mtk_reg_
- 	},
- 	.qdma = {
- 		.qtx_cfg	= 0x1800,
-+		.qtx_sch	= 0x1804,
- 		.rx_ptr		= 0x1900,
- 		.rx_cnt_cfg	= 0x1904,
- 		.qcrx_ptr	= 0x1908,
-@@ -62,6 +63,7 @@ static const struct mtk_reg_map mtk_reg_
- 		.rst_idx	= 0x1a08,
- 		.delay_irq	= 0x1a0c,
- 		.fc_th		= 0x1a10,
-+		.tx_sch_rate	= 0x1a14,
- 		.int_grp	= 0x1a20,
- 		.hred		= 0x1a44,
- 		.ctx_ptr	= 0x1b00,
-@@ -117,6 +119,7 @@ static const struct mtk_reg_map mt7986_r
- 	},
- 	.qdma = {
- 		.qtx_cfg	= 0x4400,
-+		.qtx_sch	= 0x4404,
- 		.rx_ptr		= 0x4500,
- 		.rx_cnt_cfg	= 0x4504,
- 		.qcrx_ptr	= 0x4508,
-@@ -134,6 +137,7 @@ static const struct mtk_reg_map mt7986_r
- 		.fq_tail	= 0x4724,
- 		.fq_count	= 0x4728,
- 		.fq_blen	= 0x472c,
-+		.tx_sch_rate	= 0x4798,
- 	},
- 	.gdm1_cnt		= 0x1c00,
- 	.gdma_to_ppe		= 0x3333,
-@@ -619,6 +623,75 @@ static void mtk_mac_link_down(struct phy
- 	mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
- }
- 
-+static void mtk_set_queue_speed(struct mtk_eth *eth, unsigned int idx,
-+				int speed)
-+{
-+	const struct mtk_soc_data *soc = eth->soc;
-+	u32 ofs, val;
-+
-+	if (!MTK_HAS_CAPS(soc->caps, MTK_QDMA))
-+		return;
-+
-+	val = MTK_QTX_SCH_MIN_RATE_EN |
-+	      /* minimum: 10 Mbps */
-+	      FIELD_PREP(MTK_QTX_SCH_MIN_RATE_MAN, 1) |
-+	      FIELD_PREP(MTK_QTX_SCH_MIN_RATE_EXP, 4) |
-+	      MTK_QTX_SCH_LEAKY_BUCKET_SIZE;
-+	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+		val |= MTK_QTX_SCH_LEAKY_BUCKET_EN;
-+
-+	if (IS_ENABLED(CONFIG_SOC_MT7621)) {
-+		switch (speed) {
-+		case SPEED_10:
-+			val |= MTK_QTX_SCH_MAX_RATE_EN |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_MAN, 103) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_EXP, 2) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_WEIGHT, 1);
-+			break;
-+		case SPEED_100:
-+			val |= MTK_QTX_SCH_MAX_RATE_EN |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_MAN, 103) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_EXP, 3);
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_WEIGHT, 1);
-+			break;
-+		case SPEED_1000:
-+			val |= MTK_QTX_SCH_MAX_RATE_EN |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_MAN, 105) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_EXP, 4) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_WEIGHT, 10);
-+			break;
-+		default:
-+			break;
-+		}
-+	} else {
-+		switch (speed) {
-+		case SPEED_10:
-+			val |= MTK_QTX_SCH_MAX_RATE_EN |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_MAN, 1) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_EXP, 4) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_WEIGHT, 1);
-+			break;
-+		case SPEED_100:
-+			val |= MTK_QTX_SCH_MAX_RATE_EN |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_MAN, 1) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_EXP, 5);
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_WEIGHT, 1);
-+			break;
-+		case SPEED_1000:
-+			val |= MTK_QTX_SCH_MAX_RATE_EN |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_MAN, 10) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_EXP, 5) |
-+			       FIELD_PREP(MTK_QTX_SCH_MAX_RATE_WEIGHT, 10);
-+			break;
-+		default:
-+			break;
-+		}
-+	}
-+
-+	ofs = MTK_QTX_OFFSET * idx;
-+	mtk_w32(eth, val, soc->reg_map->qdma.qtx_sch + ofs);
-+}
-+
- static void mtk_mac_link_up(struct phylink_config *config,
- 			    struct phy_device *phy,
- 			    unsigned int mode, phy_interface_t interface,
-@@ -644,6 +717,8 @@ static void mtk_mac_link_up(struct phyli
- 		break;
- 	}
- 
-+	mtk_set_queue_speed(mac->hw, mac->id, speed);
-+
- 	/* Configure duplex */
- 	if (duplex == DUPLEX_FULL)
- 		mcr |= MAC_MCR_FORCE_DPX;
-@@ -1104,7 +1179,8 @@ static void mtk_tx_set_dma_desc_v1(struc
- 
- 	WRITE_ONCE(desc->txd1, info->addr);
- 
--	data = TX_DMA_SWC | TX_DMA_PLEN0(info->size);
-+	data = TX_DMA_SWC | TX_DMA_PLEN0(info->size) |
-+	       FIELD_PREP(TX_DMA_PQID, info->qid);
- 	if (info->last)
- 		data |= TX_DMA_LS0;
- 	WRITE_ONCE(desc->txd3, data);
-@@ -1138,9 +1214,6 @@ static void mtk_tx_set_dma_desc_v2(struc
- 		data |= TX_DMA_LS0;
- 	WRITE_ONCE(desc->txd3, data);
- 
--	if (!info->qid && mac->id)
--		info->qid = MTK_QDMA_GMAC2_QID;
--
- 	data = (mac->id + 1) << TX_DMA_FPORT_SHIFT_V2; /* forward port */
- 	data |= TX_DMA_SWC_V2 | QID_BITS_V2(info->qid);
- 	WRITE_ONCE(desc->txd4, data);
-@@ -1184,11 +1257,12 @@ static int mtk_tx_map(struct sk_buff *sk
- 		.gso = gso,
- 		.csum = skb->ip_summed == CHECKSUM_PARTIAL,
- 		.vlan = skb_vlan_tag_present(skb),
--		.qid = skb->mark & MTK_QDMA_TX_MASK,
-+		.qid = skb_get_queue_mapping(skb),
- 		.vlan_tci = skb_vlan_tag_get(skb),
- 		.first = true,
- 		.last = !skb_is_nonlinear(skb),
- 	};
-+	struct netdev_queue *txq;
- 	struct mtk_mac *mac = netdev_priv(dev);
- 	struct mtk_eth *eth = mac->hw;
- 	const struct mtk_soc_data *soc = eth->soc;
-@@ -1196,8 +1270,10 @@ static int mtk_tx_map(struct sk_buff *sk
- 	struct mtk_tx_dma *itxd_pdma, *txd_pdma;
- 	struct mtk_tx_buf *itx_buf, *tx_buf;
- 	int i, n_desc = 1;
-+	int queue = skb_get_queue_mapping(skb);
- 	int k = 0;
- 
-+	txq = netdev_get_tx_queue(dev, queue);
- 	itxd = ring->next_free;
- 	itxd_pdma = qdma_to_pdma(ring, itxd);
- 	if (itxd == ring->last_free)
-@@ -1246,7 +1322,7 @@ static int mtk_tx_map(struct sk_buff *sk
- 			memset(&txd_info, 0, sizeof(struct mtk_tx_dma_desc_info));
- 			txd_info.size = min_t(unsigned int, frag_size,
- 					      soc->txrx.dma_max_len);
--			txd_info.qid = skb->mark & MTK_QDMA_TX_MASK;
-+			txd_info.qid = queue;
- 			txd_info.last = i == skb_shinfo(skb)->nr_frags - 1 &&
- 					!(frag_size - txd_info.size);
- 			txd_info.addr = skb_frag_dma_map(eth->dma_dev, frag,
-@@ -1285,7 +1361,7 @@ static int mtk_tx_map(struct sk_buff *sk
- 			txd_pdma->txd2 |= TX_DMA_LS1;
- 	}
- 
--	netdev_sent_queue(dev, skb->len);
-+	netdev_tx_sent_queue(txq, skb->len);
- 	skb_tx_timestamp(skb);
- 
- 	ring->next_free = mtk_qdma_phys_to_virt(ring, txd->txd2);
-@@ -1297,8 +1373,7 @@ static int mtk_tx_map(struct sk_buff *sk
- 	wmb();
- 
- 	if (MTK_HAS_CAPS(soc->caps, MTK_QDMA)) {
--		if (netif_xmit_stopped(netdev_get_tx_queue(dev, 0)) ||
--		    !netdev_xmit_more())
-+		if (netif_xmit_stopped(txq) || !netdev_xmit_more())
- 			mtk_w32(eth, txd->txd2, soc->reg_map->qdma.ctx_ptr);
- 	} else {
- 		int next_idx;
-@@ -1367,7 +1442,7 @@ static void mtk_wake_queue(struct mtk_et
- 	for (i = 0; i < MTK_MAC_COUNT; i++) {
- 		if (!eth->netdev[i])
- 			continue;
--		netif_wake_queue(eth->netdev[i]);
-+		netif_tx_wake_all_queues(eth->netdev[i]);
- 	}
- }
- 
-@@ -1391,7 +1466,7 @@ static netdev_tx_t mtk_start_xmit(struct
- 
- 	tx_num = mtk_cal_txd_req(eth, skb);
- 	if (unlikely(atomic_read(&ring->free_count) <= tx_num)) {
--		netif_stop_queue(dev);
-+		netif_tx_stop_all_queues(dev);
- 		netif_err(eth, tx_queued, dev,
- 			  "Tx Ring full when queue awake!\n");
- 		spin_unlock(&eth->page_lock);
-@@ -1417,7 +1492,7 @@ static netdev_tx_t mtk_start_xmit(struct
- 		goto drop;
- 
- 	if (unlikely(atomic_read(&ring->free_count) <= ring->thresh))
--		netif_stop_queue(dev);
-+		netif_tx_stop_all_queues(dev);
- 
- 	spin_unlock(&eth->page_lock);
- 
-@@ -1584,10 +1659,12 @@ static int mtk_xdp_submit_frame(struct m
- 	struct skb_shared_info *sinfo = xdp_get_shared_info_from_frame(xdpf);
- 	const struct mtk_soc_data *soc = eth->soc;
- 	struct mtk_tx_ring *ring = &eth->tx_ring;
-+	struct mtk_mac *mac = netdev_priv(dev);
- 	struct mtk_tx_dma_desc_info txd_info = {
- 		.size	= xdpf->len,
- 		.first	= true,
- 		.last	= !xdp_frame_has_frags(xdpf),
-+		.qid	= mac->id,
- 	};
- 	int err, index = 0, n_desc = 1, nr_frags;
- 	struct mtk_tx_buf *htx_buf, *tx_buf;
-@@ -1637,6 +1714,7 @@ static int mtk_xdp_submit_frame(struct m
- 		memset(&txd_info, 0, sizeof(struct mtk_tx_dma_desc_info));
- 		txd_info.size = skb_frag_size(&sinfo->frags[index]);
- 		txd_info.last = index + 1 == nr_frags;
-+		txd_info.qid = mac->id;
- 		data = skb_frag_address(&sinfo->frags[index]);
- 
- 		index++;
-@@ -1991,8 +2069,46 @@ rx_done:
- 	return done;
- }
- 
-+struct mtk_poll_state {
-+    struct netdev_queue *txq;
-+    unsigned int total;
-+    unsigned int done;
-+    unsigned int bytes;
-+};
-+
-+static void
-+mtk_poll_tx_done(struct mtk_eth *eth, struct mtk_poll_state *state, u8 mac,
-+		 struct sk_buff *skb)
-+{
-+	struct netdev_queue *txq;
-+	struct net_device *dev;
-+	unsigned int bytes = skb->len;
-+
-+	state->total++;
-+	eth->tx_packets++;
-+	eth->tx_bytes += bytes;
-+
-+	dev = eth->netdev[mac];
-+	if (!dev)
-+		return;
-+
-+	txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
-+	if (state->txq == txq) {
-+		state->done++;
-+		state->bytes += bytes;
-+		return;
-+	}
-+
-+	if (state->txq)
-+		netdev_tx_completed_queue(state->txq, state->done, state->bytes);
-+
-+	state->txq = txq;
-+	state->done = 1;
-+	state->bytes = bytes;
-+}
-+
- static int mtk_poll_tx_qdma(struct mtk_eth *eth, int budget,
--			    unsigned int *done, unsigned int *bytes)
-+			    struct mtk_poll_state *state)
- {
- 	const struct mtk_reg_map *reg_map = eth->soc->reg_map;
- 	struct mtk_tx_ring *ring = &eth->tx_ring;
-@@ -2024,12 +2140,9 @@ static int mtk_poll_tx_qdma(struct mtk_e
- 			break;
- 
- 		if (tx_buf->data != (void *)MTK_DMA_DUMMY_DESC) {
--			if (tx_buf->type == MTK_TYPE_SKB) {
--				struct sk_buff *skb = tx_buf->data;
-+			if (tx_buf->type == MTK_TYPE_SKB)
-+				mtk_poll_tx_done(eth, state, mac, tx_buf->data);
- 
--				bytes[mac] += skb->len;
--				done[mac]++;
--			}
- 			budget--;
- 		}
- 		mtk_tx_unmap(eth, tx_buf, &bq, true);
-@@ -2048,7 +2161,7 @@ static int mtk_poll_tx_qdma(struct mtk_e
- }
- 
- static int mtk_poll_tx_pdma(struct mtk_eth *eth, int budget,
--			    unsigned int *done, unsigned int *bytes)
-+			    struct mtk_poll_state *state)
- {
- 	struct mtk_tx_ring *ring = &eth->tx_ring;
- 	struct mtk_tx_buf *tx_buf;
-@@ -2066,12 +2179,8 @@ static int mtk_poll_tx_pdma(struct mtk_e
- 			break;
- 
- 		if (tx_buf->data != (void *)MTK_DMA_DUMMY_DESC) {
--			if (tx_buf->type == MTK_TYPE_SKB) {
--				struct sk_buff *skb = tx_buf->data;
--
--				bytes[0] += skb->len;
--				done[0]++;
--			}
-+			if (tx_buf->type == MTK_TYPE_SKB)
-+				mtk_poll_tx_done(eth, state, 0, tx_buf->data);
- 			budget--;
- 		}
- 		mtk_tx_unmap(eth, tx_buf, &bq, true);
-@@ -2093,26 +2202,15 @@ static int mtk_poll_tx(struct mtk_eth *e
- {
- 	struct mtk_tx_ring *ring = &eth->tx_ring;
- 	struct dim_sample dim_sample = {};
--	unsigned int done[MTK_MAX_DEVS];
--	unsigned int bytes[MTK_MAX_DEVS];
--	int total = 0, i;
--
--	memset(done, 0, sizeof(done));
--	memset(bytes, 0, sizeof(bytes));
-+	struct mtk_poll_state state = {};
- 
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
--		budget = mtk_poll_tx_qdma(eth, budget, done, bytes);
-+		budget = mtk_poll_tx_qdma(eth, budget, &state);
- 	else
--		budget = mtk_poll_tx_pdma(eth, budget, done, bytes);
-+		budget = mtk_poll_tx_pdma(eth, budget, &state);
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
--		if (!eth->netdev[i] || !done[i])
--			continue;
--		netdev_completed_queue(eth->netdev[i], done[i], bytes[i]);
--		total += done[i];
--		eth->tx_packets += done[i];
--		eth->tx_bytes += bytes[i];
--	}
-+	if (state.txq)
-+		netdev_tx_completed_queue(state.txq, state.done, state.bytes);
- 
- 	dim_update_sample(eth->tx_events, eth->tx_packets, eth->tx_bytes,
- 			  &dim_sample);
-@@ -2122,7 +2220,7 @@ static int mtk_poll_tx(struct mtk_eth *e
- 	    (atomic_read(&ring->free_count) > ring->thresh))
- 		mtk_wake_queue(eth);
- 
--	return total;
-+	return state.total;
- }
- 
- static void mtk_handle_status_irq(struct mtk_eth *eth)
-@@ -2208,6 +2306,7 @@ static int mtk_tx_alloc(struct mtk_eth *
- 	int i, sz = soc->txrx.txd_size;
- 	struct mtk_tx_dma_v2 *txd;
- 	int ring_size;
-+	u32 ofs, val;
- 
- 	if (MTK_HAS_CAPS(soc->caps, MTK_QDMA))
- 		ring_size = MTK_QDMA_RING_SIZE;
-@@ -2275,8 +2374,25 @@ static int mtk_tx_alloc(struct mtk_eth *
- 			ring->phys + ((ring_size - 1) * sz),
- 			soc->reg_map->qdma.crx_ptr);
- 		mtk_w32(eth, ring->last_free_ptr, soc->reg_map->qdma.drx_ptr);
--		mtk_w32(eth, (QDMA_RES_THRES << 8) | QDMA_RES_THRES,
--			soc->reg_map->qdma.qtx_cfg);
-+
-+		for (i = 0, ofs = 0; i < MTK_QDMA_NUM_QUEUES; i++) {
-+			val = (QDMA_RES_THRES << 8) | QDMA_RES_THRES;
-+			mtk_w32(eth, val, soc->reg_map->qdma.qtx_cfg + ofs);
-+
-+			val = MTK_QTX_SCH_MIN_RATE_EN |
-+			      /* minimum: 10 Mbps */
-+			      FIELD_PREP(MTK_QTX_SCH_MIN_RATE_MAN, 1) |
-+			      FIELD_PREP(MTK_QTX_SCH_MIN_RATE_EXP, 4) |
-+			      MTK_QTX_SCH_LEAKY_BUCKET_SIZE;
-+			if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+				val |= MTK_QTX_SCH_LEAKY_BUCKET_EN;
-+			mtk_w32(eth, val, soc->reg_map->qdma.qtx_sch + ofs);
-+			ofs += MTK_QTX_OFFSET;
-+		}
-+		val = MTK_QDMA_TX_SCH_MAX_WFQ | (MTK_QDMA_TX_SCH_MAX_WFQ << 16);
-+		mtk_w32(eth, val, soc->reg_map->qdma.tx_sch_rate);
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+			mtk_w32(eth, val, soc->reg_map->qdma.tx_sch_rate + 4);
- 	} else {
- 		mtk_w32(eth, ring->phys_pdma, MT7628_TX_BASE_PTR0);
- 		mtk_w32(eth, ring_size, MT7628_TX_MAX_CNT0);
-@@ -2961,7 +3077,7 @@ static int mtk_start_dma(struct mtk_eth
- 		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
- 			val |= MTK_MUTLI_CNT | MTK_RESV_BUF |
- 			       MTK_WCOMP_EN | MTK_DMAD_WR_WDONE |
--			       MTK_CHK_DDONE_EN;
-+			       MTK_CHK_DDONE_EN | MTK_LEAKY_BUCKET_EN;
- 		else
- 			val |= MTK_RX_BT_32DWORDS;
- 		mtk_w32(eth, val, reg_map->qdma.glo_cfg);
-@@ -3007,6 +3123,45 @@ static void mtk_gdm_config(struct mtk_et
- 	mtk_w32(eth, 0, MTK_RST_GL);
- }
- 
-+static int mtk_device_event(struct notifier_block *n, unsigned long event, void *ptr)
-+{
-+	struct mtk_mac *mac = container_of(n, struct mtk_mac, device_notifier);
-+	struct mtk_eth *eth = mac->hw;
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+	struct ethtool_link_ksettings s;
-+	struct net_device *ldev;
-+	struct list_head *iter;
-+	struct dsa_port *dp;
-+
-+	if (event != NETDEV_CHANGE)
-+		return NOTIFY_DONE;
-+
-+	netdev_for_each_lower_dev(dev, ldev, iter) {
-+		if (netdev_priv(ldev) == mac)
-+			goto found;
-+	}
-+
-+	return NOTIFY_DONE;
-+
-+found:
-+	if (!dsa_slave_dev_check(dev))
-+		return NOTIFY_DONE;
-+
-+	if (__ethtool_get_link_ksettings(dev, &s))
-+		return NOTIFY_DONE;
-+
-+	if (s.base.speed == 0 || s.base.speed == ((__u32)-1))
-+		return NOTIFY_DONE;
-+
-+	dp = dsa_port_from_netdev(dev);
-+	if (dp->index >= MTK_QDMA_NUM_QUEUES)
-+		return NOTIFY_DONE;
-+
-+	mtk_set_queue_speed(eth, dp->index + 3, s.base.speed);
-+
-+	return NOTIFY_DONE;
-+}
-+
- static int mtk_open(struct net_device *dev)
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
-@@ -3049,7 +3204,8 @@ static int mtk_open(struct net_device *d
- 		refcount_inc(&eth->dma_refcnt);
- 
- 	phylink_start(mac->phylink);
--	netif_start_queue(dev);
-+	netif_tx_start_all_queues(dev);
-+
- 	return 0;
- }
- 
-@@ -3758,8 +3914,12 @@ static int mtk_unreg_dev(struct mtk_eth
- 	int i;
- 
- 	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+		struct mtk_mac *mac;
- 		if (!eth->netdev[i])
- 			continue;
-+		mac = netdev_priv(eth->netdev[i]);
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
-+			unregister_netdevice_notifier(&mac->device_notifier);
- 		unregister_netdev(eth->netdev[i]);
- 	}
- 
-@@ -3976,6 +4136,23 @@ static int mtk_set_rxnfc(struct net_devi
- 	return ret;
- }
- 
-+static u16 mtk_select_queue(struct net_device *dev, struct sk_buff *skb,
-+			    struct net_device *sb_dev)
-+{
-+	struct mtk_mac *mac = netdev_priv(dev);
-+	unsigned int queue = 0;
-+
-+	if (netdev_uses_dsa(dev))
-+		queue = skb_get_queue_mapping(skb) + 3;
-+	else
-+		queue = mac->id;
-+
-+	if (queue >= dev->num_tx_queues)
-+		queue = 0;
-+
-+	return queue;
-+}
-+
- static const struct ethtool_ops mtk_ethtool_ops = {
- 	.get_link_ksettings	= mtk_get_link_ksettings,
- 	.set_link_ksettings	= mtk_set_link_ksettings,
-@@ -4010,6 +4187,7 @@ static const struct net_device_ops mtk_n
- 	.ndo_setup_tc		= mtk_eth_setup_tc,
- 	.ndo_bpf		= mtk_xdp,
- 	.ndo_xdp_xmit		= mtk_xdp_xmit,
-+	.ndo_select_queue	= mtk_select_queue,
- };
- 
- static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
-@@ -4019,6 +4197,7 @@ static int mtk_add_mac(struct mtk_eth *e
- 	struct phylink *phylink;
- 	struct mtk_mac *mac;
- 	int id, err;
-+	int txqs = 1;
- 
- 	if (!_id) {
- 		dev_err(eth->dev, "missing mac id\n");
-@@ -4036,7 +4215,10 @@ static int mtk_add_mac(struct mtk_eth *e
- 		return -EINVAL;
- 	}
- 
--	eth->netdev[id] = alloc_etherdev(sizeof(*mac));
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
-+		txqs = MTK_QDMA_NUM_QUEUES;
-+
-+	eth->netdev[id] = alloc_etherdev_mqs(sizeof(*mac), txqs, 1);
- 	if (!eth->netdev[id]) {
- 		dev_err(eth->dev, "alloc_etherdev failed\n");
- 		return -ENOMEM;
-@@ -4144,6 +4326,11 @@ static int mtk_add_mac(struct mtk_eth *e
- 	else
- 		eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN;
- 
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA)) {
-+		mac->device_notifier.notifier_call = mtk_device_event;
-+		register_netdevice_notifier(&mac->device_notifier);
-+	}
-+
- 	return 0;
- 
- free_netdev:
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -22,6 +22,7 @@
- #include <linux/bpf_trace.h>
- #include "mtk_ppe.h"
- 
-+#define MTK_QDMA_NUM_QUEUES	16
- #define MTK_QDMA_PAGE_SIZE	2048
- #define MTK_MAX_RX_LENGTH	1536
- #define MTK_MAX_RX_LENGTH_2K	2048
-@@ -216,8 +217,26 @@
- #define MTK_RING_MAX_AGG_CNT_H		((MTK_HW_LRO_MAX_AGG_CNT >> 6) & 0x3)
- 
- /* QDMA TX Queue Configuration Registers */
-+#define MTK_QTX_OFFSET		0x10
- #define QDMA_RES_THRES		4
- 
-+/* QDMA Tx Queue Scheduler Configuration Registers */
-+#define MTK_QTX_SCH_TX_SEL		BIT(31)
-+#define MTK_QTX_SCH_TX_SEL_V2		GENMASK(31, 30)
-+
-+#define MTK_QTX_SCH_LEAKY_BUCKET_EN	BIT(30)
-+#define MTK_QTX_SCH_LEAKY_BUCKET_SIZE	GENMASK(29, 28)
-+#define MTK_QTX_SCH_MIN_RATE_EN		BIT(27)
-+#define MTK_QTX_SCH_MIN_RATE_MAN	GENMASK(26, 20)
-+#define MTK_QTX_SCH_MIN_RATE_EXP	GENMASK(19, 16)
-+#define MTK_QTX_SCH_MAX_RATE_WEIGHT	GENMASK(15, 12)
-+#define MTK_QTX_SCH_MAX_RATE_EN		BIT(11)
-+#define MTK_QTX_SCH_MAX_RATE_MAN	GENMASK(10, 4)
-+#define MTK_QTX_SCH_MAX_RATE_EXP	GENMASK(3, 0)
-+
-+/* QDMA TX Scheduler Rate Control Register */
-+#define MTK_QDMA_TX_SCH_MAX_WFQ		BIT(15)
-+
- /* QDMA Global Configuration Register */
- #define MTK_RX_2B_OFFSET	BIT(31)
- #define MTK_RX_BT_32DWORDS	(3 << 11)
-@@ -236,6 +255,7 @@
- #define MTK_WCOMP_EN		BIT(24)
- #define MTK_RESV_BUF		(0x40 << 16)
- #define MTK_MUTLI_CNT		(0x4 << 12)
-+#define MTK_LEAKY_BUCKET_EN	BIT(11)
- 
- /* QDMA Flow Control Register */
- #define FC_THRES_DROP_MODE	BIT(20)
-@@ -266,8 +286,6 @@
- #define MTK_STAT_OFFSET		0x40
- 
- /* QDMA TX NUM */
--#define MTK_QDMA_TX_NUM		16
--#define MTK_QDMA_TX_MASK	(MTK_QDMA_TX_NUM - 1)
- #define QID_BITS_V2(x)		(((x) & 0x3f) << 16)
- #define MTK_QDMA_GMAC2_QID	8
- 
-@@ -297,6 +315,7 @@
- #define TX_DMA_PLEN0(x)		(((x) & eth->soc->txrx.dma_max_len) << eth->soc->txrx.dma_len_offset)
- #define TX_DMA_PLEN1(x)		((x) & eth->soc->txrx.dma_max_len)
- #define TX_DMA_SWC		BIT(14)
-+#define TX_DMA_PQID		GENMASK(3, 0)
- 
- /* PDMA on MT7628 */
- #define TX_DMA_DONE		BIT(31)
-@@ -957,6 +976,7 @@ struct mtk_reg_map {
- 	} pdma;
- 	struct {
- 		u32	qtx_cfg;	/* tx queue configuration */
-+		u32	qtx_sch;	/* tx queue scheduler configuration */
- 		u32	rx_ptr;		/* rx base pointer */
- 		u32	rx_cnt_cfg;	/* rx max count configuration */
- 		u32	qcrx_ptr;	/* rx cpu pointer */
-@@ -974,6 +994,7 @@ struct mtk_reg_map {
- 		u32	fq_tail;	/* fq tail pointer */
- 		u32	fq_count;	/* fq free page count */
- 		u32	fq_blen;	/* fq free page buffer length */
-+		u32	tx_sch_rate;	/* tx scheduler rate control registers */
- 	} qdma;
- 	u32	gdm1_cnt;
- 	u32	gdma_to_ppe;
-@@ -1177,6 +1198,7 @@ struct mtk_mac {
- 	__be32				hwlro_ip[MTK_MAX_LRO_IP_CNT];
- 	int				hwlro_ip_cnt;
- 	unsigned int			syscfg0;
-+	struct notifier_block		device_notifier;
- };
- 
- /* the struct describing the SoC. these are declared in the soc_xyz.c files */
diff --git a/target/linux/generic/backport-6.1/730-05-v6.3-net-dsa-tag_mtk-assign-per-port-queues.patch b/target/linux/generic/backport-6.1/730-05-v6.3-net-dsa-tag_mtk-assign-per-port-queues.patch
deleted file mode 100644
index 186df4bdc924..000000000000
--- a/target/linux/generic/backport-6.1/730-05-v6.3-net-dsa-tag_mtk-assign-per-port-queues.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 28 Oct 2022 18:16:03 +0200
-Subject: [PATCH] net: dsa: tag_mtk: assign per-port queues
-
-Keeps traffic sent to the switch within link speed limits
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/dsa/tag_mtk.c
-+++ b/net/dsa/tag_mtk.c
-@@ -25,6 +25,8 @@ static struct sk_buff *mtk_tag_xmit(stru
- 	u8 xmit_tpid;
- 	u8 *mtk_tag;
- 
-+	skb_set_queue_mapping(skb, dp->index);
-+
- 	/* Build the special tag after the MAC Source Address. If VLAN header
- 	 * is present, it's required that VLAN header and special tag is
- 	 * being combined. Only in this way we can allow the switch can parse
diff --git a/target/linux/generic/backport-6.1/730-06-v6.3-net-ethernet-mediatek-ppe-assign-per-port-queues-for.patch b/target/linux/generic/backport-6.1/730-06-v6.3-net-ethernet-mediatek-ppe-assign-per-port-queues-for.patch
deleted file mode 100644
index d29177eee722..000000000000
--- a/target/linux/generic/backport-6.1/730-06-v6.3-net-ethernet-mediatek-ppe-assign-per-port-queues-for.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 3 Nov 2022 17:49:44 +0100
-Subject: [PATCH] net: ethernet: mediatek: ppe: assign per-port queues
- for offloaded traffic
-
-Keeps traffic sent to the switch within link speed limits
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -399,6 +399,24 @@ int mtk_foe_entry_set_wdma(struct mtk_et
- 	return 0;
- }
- 
-+int mtk_foe_entry_set_queue(struct mtk_eth *eth, struct mtk_foe_entry *entry,
-+			    unsigned int queue)
-+{
-+	u32 *ib2 = mtk_foe_entry_ib2(eth, entry);
-+
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+		*ib2 &= ~MTK_FOE_IB2_QID_V2;
-+		*ib2 |= FIELD_PREP(MTK_FOE_IB2_QID_V2, queue);
-+		*ib2 |= MTK_FOE_IB2_PSE_QOS_V2;
-+	} else {
-+		*ib2 &= ~MTK_FOE_IB2_QID;
-+		*ib2 |= FIELD_PREP(MTK_FOE_IB2_QID, queue);
-+		*ib2 |= MTK_FOE_IB2_PSE_QOS;
-+	}
-+
-+	return 0;
-+}
-+
- static bool
- mtk_flow_entry_match(struct mtk_eth *eth, struct mtk_flow_entry *entry,
- 		     struct mtk_foe_entry *data)
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -68,7 +68,9 @@ enum {
- #define MTK_FOE_IB2_DSCP		GENMASK(31, 24)
- 
- /* CONFIG_MEDIATEK_NETSYS_V2 */
-+#define MTK_FOE_IB2_QID_V2			GENMASK(6, 0)
- #define MTK_FOE_IB2_PORT_MG_V2		BIT(7)
-+#define MTK_FOE_IB2_PSE_QOS_V2		BIT(8)
- #define MTK_FOE_IB2_DEST_PORT_V2	GENMASK(12, 9)
- #define MTK_FOE_IB2_MULTICAST_V2	BIT(13)
- #define MTK_FOE_IB2_WDMA_WINFO_V2	BIT(19)
-@@ -351,6 +353,8 @@ int mtk_foe_entry_set_pppoe(struct mtk_e
- 			    int sid);
- int mtk_foe_entry_set_wdma(struct mtk_eth *eth, struct mtk_foe_entry *entry,
- 			   int wdma_idx, int txq, int bss, int wcid);
-+int mtk_foe_entry_set_queue(struct mtk_eth *eth, struct mtk_foe_entry *entry,
-+			    unsigned int queue);
- int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
- void mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
- int mtk_foe_entry_idle_time(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -188,7 +188,7 @@ mtk_flow_set_output_device(struct mtk_et
- 			   int *wed_index)
- {
- 	struct mtk_wdma_info info = {};
--	int pse_port, dsa_port;
-+	int pse_port, dsa_port, queue;
- 
- 	if (mtk_flow_get_wdma_info(dev, dest_mac, &info) == 0) {
- 		mtk_foe_entry_set_wdma(eth, foe, info.wdma_idx, info.queue,
-@@ -212,8 +212,6 @@ mtk_flow_set_output_device(struct mtk_et
- 	}
- 
- 	dsa_port = mtk_flow_get_dsa_port(&dev);
--	if (dsa_port >= 0)
--		mtk_foe_entry_set_dsa(eth, foe, dsa_port);
- 
- 	if (dev == eth->netdev[0])
- 		pse_port = 1;
-@@ -222,6 +220,14 @@ mtk_flow_set_output_device(struct mtk_et
- 	else
- 		return -EOPNOTSUPP;
- 
-+	if (dsa_port >= 0) {
-+		mtk_foe_entry_set_dsa(eth, foe, dsa_port);
-+		queue = 3 + dsa_port;
-+	} else {
-+		queue = pse_port - 1;
-+	}
-+	mtk_foe_entry_set_queue(eth, foe, queue);
-+
- out:
- 	mtk_foe_entry_set_pse_port(eth, foe, pse_port);
- 
diff --git a/target/linux/generic/backport-6.1/730-08-v6.3-net-dsa-add-support-for-DSA-rx-offloading-via-metada.patch b/target/linux/generic/backport-6.1/730-08-v6.3-net-dsa-add-support-for-DSA-rx-offloading-via-metada.patch
deleted file mode 100644
index 6b7f3d6018c5..000000000000
--- a/target/linux/generic/backport-6.1/730-08-v6.3-net-dsa-add-support-for-DSA-rx-offloading-via-metada.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 8 Nov 2022 15:03:15 +0100
-Subject: [PATCH] net: dsa: add support for DSA rx offloading via
- metadata dst
-
-If a metadata dst is present with the type METADATA_HW_PORT_MUX on a dsa cpu
-port netdev, assume that it carries the port number and that there is no DSA
-tag present in the skb data.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -971,12 +971,14 @@ bool __skb_flow_dissect(const struct net
- #if IS_ENABLED(CONFIG_NET_DSA)
- 		if (unlikely(skb->dev && netdev_uses_dsa(skb->dev) &&
- 			     proto == htons(ETH_P_XDSA))) {
-+			struct metadata_dst *md_dst = skb_metadata_dst(skb);
- 			const struct dsa_device_ops *ops;
- 			int offset = 0;
- 
- 			ops = skb->dev->dsa_ptr->tag_ops;
- 			/* Only DSA header taggers break flow dissection */
--			if (ops->needed_headroom) {
-+			if (ops->needed_headroom &&
-+			    (!md_dst || md_dst->type != METADATA_HW_PORT_MUX)) {
- 				if (ops->flow_dissect)
- 					ops->flow_dissect(skb, &proto, &offset);
- 				else
---- a/net/dsa/dsa.c
-+++ b/net/dsa/dsa.c
-@@ -11,6 +11,7 @@
- #include <linux/netdevice.h>
- #include <linux/sysfs.h>
- #include <linux/ptp_classify.h>
-+#include <net/dst_metadata.h>
- 
- #include "dsa_priv.h"
- 
-@@ -216,6 +217,7 @@ static bool dsa_skb_defer_rx_timestamp(s
- static int dsa_switch_rcv(struct sk_buff *skb, struct net_device *dev,
- 			  struct packet_type *pt, struct net_device *unused)
- {
-+	struct metadata_dst *md_dst = skb_metadata_dst(skb);
- 	struct dsa_port *cpu_dp = dev->dsa_ptr;
- 	struct sk_buff *nskb = NULL;
- 	struct dsa_slave_priv *p;
-@@ -229,7 +231,22 @@ static int dsa_switch_rcv(struct sk_buff
- 	if (!skb)
- 		return 0;
- 
--	nskb = cpu_dp->rcv(skb, dev);
-+	if (md_dst && md_dst->type == METADATA_HW_PORT_MUX) {
-+		unsigned int port = md_dst->u.port_info.port_id;
-+
-+		skb_dst_drop(skb);
-+		if (!skb_has_extensions(skb))
-+			skb->slow_gro = 0;
-+
-+		skb->dev = dsa_master_find_slave(dev, 0, port);
-+		if (likely(skb->dev)) {
-+			dsa_default_offload_fwd_mark(skb);
-+			nskb = skb;
-+		}
-+	} else {
-+		nskb = cpu_dp->rcv(skb, dev);
-+	}
-+
- 	if (!nskb) {
- 		kfree_skb(skb);
- 		return 0;
diff --git a/target/linux/generic/backport-6.1/730-09-v6.3-net-ethernet-mtk_eth_soc-fix-VLAN-rx-hardware-accele.patch b/target/linux/generic/backport-6.1/730-09-v6.3-net-ethernet-mtk_eth_soc-fix-VLAN-rx-hardware-accele.patch
deleted file mode 100644
index 53d8ff472ef0..000000000000
--- a/target/linux/generic/backport-6.1/730-09-v6.3-net-ethernet-mtk_eth_soc-fix-VLAN-rx-hardware-accele.patch
+++ /dev/null
@@ -1,192 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 28 Oct 2022 11:01:12 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix VLAN rx hardware
- acceleration
-
-- enable VLAN untagging for PDMA rx
-- make it possible to disable the feature via ethtool
-- pass VLAN tag to the DSA driver
-- untag special tag on PDMA only if no non-DSA devices are in use
-- disable special tag untagging on 7986 for now, since it's not working yet
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -23,6 +23,7 @@
- #include <linux/jhash.h>
- #include <linux/bitfield.h>
- #include <net/dsa.h>
-+#include <net/dst_metadata.h>
- 
- #include "mtk_eth_soc.h"
- #include "mtk_wed.h"
-@@ -2020,16 +2021,22 @@ static int mtk_poll_rx(struct napi_struc
- 						htons(RX_DMA_VPID(trxd.rxd4)),
- 						RX_DMA_VID(trxd.rxd4));
- 			} else if (trxd.rxd2 & RX_DMA_VTAG) {
--				__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
-+				__vlan_hwaccel_put_tag(skb, htons(RX_DMA_VPID(trxd.rxd3)),
- 						       RX_DMA_VID(trxd.rxd3));
- 			}
-+		}
-+
-+		/* When using VLAN untagging in combination with DSA, the
-+		 * hardware treats the MTK special tag as a VLAN and untags it.
-+		 */
-+		if (skb_vlan_tag_present(skb) && netdev_uses_dsa(netdev)) {
-+			unsigned int port = ntohs(skb->vlan_proto) & GENMASK(2, 0);
- 
--			/* If the device is attached to a dsa switch, the special
--			 * tag inserted in VLAN field by hw switch can * be offloaded
--			 * by RX HW VLAN offload. Clear vlan info.
--			 */
--			if (netdev_uses_dsa(netdev))
--				__vlan_hwaccel_clear_tag(skb);
-+			if (port < ARRAY_SIZE(eth->dsa_meta) &&
-+			    eth->dsa_meta[port])
-+				skb_dst_set_noref(skb, &eth->dsa_meta[port]->dst);
-+
-+			__vlan_hwaccel_clear_tag(skb);
- 		}
- 
- 		skb_record_rx_queue(skb, 0);
-@@ -2857,15 +2864,30 @@ static netdev_features_t mtk_fix_feature
- 
- static int mtk_set_features(struct net_device *dev, netdev_features_t features)
- {
--	int err = 0;
-+	struct mtk_mac *mac = netdev_priv(dev);
-+	struct mtk_eth *eth = mac->hw;
-+	netdev_features_t diff = dev->features ^ features;
-+	int i;
-+
-+	if ((diff & NETIF_F_LRO) && !(features & NETIF_F_LRO))
-+		mtk_hwlro_netdev_disable(dev);
- 
--	if (!((dev->features ^ features) & NETIF_F_LRO))
-+	/* Set RX VLAN offloading */
-+	if (!(diff & NETIF_F_HW_VLAN_CTAG_RX))
- 		return 0;
- 
--	if (!(features & NETIF_F_LRO))
--		mtk_hwlro_netdev_disable(dev);
-+	mtk_w32(eth, !!(features & NETIF_F_HW_VLAN_CTAG_RX),
-+		MTK_CDMP_EG_CTRL);
- 
--	return err;
-+	/* sync features with other MAC */
-+	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+		if (!eth->netdev[i] || eth->netdev[i] == dev)
-+			continue;
-+		eth->netdev[i]->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
-+		eth->netdev[i]->features |= features & NETIF_F_HW_VLAN_CTAG_RX;
-+	}
-+
-+	return 0;
- }
- 
- /* wait for DMA to finish whatever it is doing before we start using it again */
-@@ -3162,11 +3184,45 @@ found:
- 	return NOTIFY_DONE;
- }
- 
-+static bool mtk_uses_dsa(struct net_device *dev)
-+{
-+#if IS_ENABLED(CONFIG_NET_DSA)
-+	return netdev_uses_dsa(dev) &&
-+	       dev->dsa_ptr->tag_ops->proto == DSA_TAG_PROTO_MTK;
-+#else
-+	return false;
-+#endif
-+}
-+
- static int mtk_open(struct net_device *dev)
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
- 	struct mtk_eth *eth = mac->hw;
--	int err;
-+	int i, err;
-+
-+	if (mtk_uses_dsa(dev) && !eth->prog) {
-+		for (i = 0; i < ARRAY_SIZE(eth->dsa_meta); i++) {
-+			struct metadata_dst *md_dst = eth->dsa_meta[i];
-+
-+			if (md_dst)
-+				continue;
-+
-+			md_dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX,
-+						    GFP_KERNEL);
-+			if (!md_dst)
-+				return -ENOMEM;
-+
-+			md_dst->u.port_info.port_id = i;
-+			eth->dsa_meta[i] = md_dst;
-+		}
-+	} else {
-+		/* Hardware special tag parsing needs to be disabled if at least
-+		 * one MAC does not use DSA.
-+		 */
-+		u32 val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
-+		val &= ~MTK_CDMP_STAG_EN;
-+		mtk_w32(eth, val, MTK_CDMP_IG_CTRL);
-+	}
- 
- 	err = phylink_of_phy_connect(mac->phylink, mac->of_node, 0);
- 	if (err) {
-@@ -3687,6 +3743,10 @@ static int mtk_hw_init(struct mtk_eth *e
- 	 */
- 	val = mtk_r32(eth, MTK_CDMQ_IG_CTRL);
- 	mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL);
-+	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+		val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
-+		mtk_w32(eth, val | MTK_CDMP_STAG_EN, MTK_CDMP_IG_CTRL);
-+	}
- 
- 	/* Enable RX VLan Offloading */
- 	mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
-@@ -3906,6 +3966,12 @@ static int mtk_free_dev(struct mtk_eth *
- 		free_netdev(eth->netdev[i]);
- 	}
- 
-+	for (i = 0; i < ARRAY_SIZE(eth->dsa_meta); i++) {
-+		if (!eth->dsa_meta[i])
-+			break;
-+		metadata_dst_free(eth->dsa_meta[i]);
-+	}
-+
- 	return 0;
- }
- 
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -22,6 +22,9 @@
- #include <linux/bpf_trace.h>
- #include "mtk_ppe.h"
- 
-+#define MTK_MAX_DSA_PORTS	7
-+#define MTK_DSA_PORT_MASK	GENMASK(2, 0)
-+
- #define MTK_QDMA_NUM_QUEUES	16
- #define MTK_QDMA_PAGE_SIZE	2048
- #define MTK_MAX_RX_LENGTH	1536
-@@ -105,6 +108,9 @@
- #define MTK_CDMQ_IG_CTRL	0x1400
- #define MTK_CDMQ_STAG_EN	BIT(0)
- 
-+/* CDMQ Exgress Control Register */
-+#define MTK_CDMQ_EG_CTRL	0x1404
-+
- /* CDMP Ingress Control Register */
- #define MTK_CDMP_IG_CTRL	0x400
- #define MTK_CDMP_STAG_EN	BIT(0)
-@@ -1164,6 +1170,8 @@ struct mtk_eth {
- 
- 	int				ip_align;
- 
-+	struct metadata_dst		*dsa_meta[MTK_MAX_DSA_PORTS];
-+
- 	struct mtk_ppe			*ppe[2];
- 	struct rhashtable		flow_table;
- 
diff --git a/target/linux/generic/backport-6.1/730-12-v6.3-net-ethernet-mtk_eth_soc-disable-hardware-DSA-untagg.patch b/target/linux/generic/backport-6.1/730-12-v6.3-net-ethernet-mtk_eth_soc-disable-hardware-DSA-untagg.patch
deleted file mode 100644
index 08d72fc82093..000000000000
--- a/target/linux/generic/backport-6.1/730-12-v6.3-net-ethernet-mtk_eth_soc-disable-hardware-DSA-untagg.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Sat, 28 Jan 2023 12:42:32 +0300
-Subject: [PATCH] net: ethernet: mtk_eth_soc: disable hardware DSA untagging
- for second MAC
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-According to my tests on MT7621AT and MT7623NI SoCs, hardware DSA untagging
-won't work on the second MAC. Therefore, disable this feature when the
-second MAC of the MT7621 and MT7623 SoCs is being used.
-
-Fixes: 2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging")
-Link: https://lore.kernel.org/netdev/6249fc14-b38a-c770-36b4-5af6d41c21d3@arinc9.com/
-Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/20230128094232.2451947-1-arinc.unal@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -3200,7 +3200,8 @@ static int mtk_open(struct net_device *d
- 	struct mtk_eth *eth = mac->hw;
- 	int i, err;
- 
--	if (mtk_uses_dsa(dev) && !eth->prog) {
-+	if ((mtk_uses_dsa(dev) && !eth->prog) &&
-+	    !(mac->id == 1 && MTK_HAS_CAPS(eth->soc->caps, MTK_GMAC1_TRGMII))) {
- 		for (i = 0; i < ARRAY_SIZE(eth->dsa_meta); i++) {
- 			struct metadata_dst *md_dst = eth->dsa_meta[i];
- 
-@@ -3217,7 +3218,8 @@ static int mtk_open(struct net_device *d
- 		}
- 	} else {
- 		/* Hardware special tag parsing needs to be disabled if at least
--		 * one MAC does not use DSA.
-+		 * one MAC does not use DSA, or the second MAC of the MT7621 and
-+		 * MT7623 SoCs is being used.
- 		 */
- 		u32 val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
- 		val &= ~MTK_CDMP_STAG_EN;
diff --git a/target/linux/generic/backport-6.1/730-13-v6.3-net-ethernet-mtk_eth_soc-enable-special-tag-when-any.patch b/target/linux/generic/backport-6.1/730-13-v6.3-net-ethernet-mtk_eth_soc-enable-special-tag-when-any.patch
deleted file mode 100644
index 30c32d5cce04..000000000000
--- a/target/linux/generic/backport-6.1/730-13-v6.3-net-ethernet-mtk_eth_soc-enable-special-tag-when-any.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Sun, 5 Feb 2023 20:53:31 +0300
-Subject: [PATCH] net: ethernet: mtk_eth_soc: enable special tag when any MAC
- uses DSA
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The special tag is only enabled when the first MAC uses DSA. However, it
-must be enabled when any MAC uses DSA. Change the check accordingly.
-
-This fixes hardware DSA untagging not working on the second MAC of the
-MT7621 and MT7623 SoCs, and likely other SoCs too. Therefore, remove the
-check that disables hardware DSA untagging for the second MAC of the MT7621
-and MT7623 SoCs.
-
-Fixes: a1f47752fd62 ("net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC")
-Co-developed-by: Richard van Schagen <richard@routerhints.com>
-Signed-off-by: Richard van Schagen <richard@routerhints.com>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -3135,7 +3135,7 @@ static void mtk_gdm_config(struct mtk_et
- 
- 		val |= config;
- 
--		if (!i && eth->netdev[0] && netdev_uses_dsa(eth->netdev[0]))
-+		if (eth->netdev[i] && netdev_uses_dsa(eth->netdev[i]))
- 			val |= MTK_GDMA_SPECIAL_TAG;
- 
- 		mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
-@@ -3200,8 +3200,7 @@ static int mtk_open(struct net_device *d
- 	struct mtk_eth *eth = mac->hw;
- 	int i, err;
- 
--	if ((mtk_uses_dsa(dev) && !eth->prog) &&
--	    !(mac->id == 1 && MTK_HAS_CAPS(eth->soc->caps, MTK_GMAC1_TRGMII))) {
-+	if (mtk_uses_dsa(dev) && !eth->prog) {
- 		for (i = 0; i < ARRAY_SIZE(eth->dsa_meta); i++) {
- 			struct metadata_dst *md_dst = eth->dsa_meta[i];
- 
-@@ -3218,8 +3217,7 @@ static int mtk_open(struct net_device *d
- 		}
- 	} else {
- 		/* Hardware special tag parsing needs to be disabled if at least
--		 * one MAC does not use DSA, or the second MAC of the MT7621 and
--		 * MT7623 SoCs is being used.
-+		 * one MAC does not use DSA.
- 		 */
- 		u32 val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
- 		val &= ~MTK_CDMP_STAG_EN;
diff --git a/target/linux/generic/backport-6.1/730-14-v6.3-net-ethernet-mtk_eth_soc-fix-DSA-TX-tag-hwaccel-for-.patch b/target/linux/generic/backport-6.1/730-14-v6.3-net-ethernet-mtk_eth_soc-fix-DSA-TX-tag-hwaccel-for-.patch
deleted file mode 100644
index eb3b0c63bca8..000000000000
--- a/target/linux/generic/backport-6.1/730-14-v6.3-net-ethernet-mtk_eth_soc-fix-DSA-TX-tag-hwaccel-for-.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 7 Feb 2023 12:30:27 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch
- port 0
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Arınç reports that on his MT7621AT Unielec U7621-06 board and MT7623NI
-Bananapi BPI-R2, packets received by the CPU over mt7530 switch port 0
-(of which this driver acts as the DSA master) are not processed
-correctly by software. More precisely, they arrive without a DSA tag
-(in packet or in the hwaccel area - skb_metadata_dst()), so DSA cannot
-demux them towards the switch's interface for port 0. Traffic from other
-ports receives a skb_metadata_dst() with the correct port and is demuxed
-properly.
-
-Looking at mtk_poll_rx(), it becomes apparent that this driver uses the
-skb vlan hwaccel area:
-
-	union {
-		u32		vlan_all;
-		struct {
-			__be16	vlan_proto;
-			__u16	vlan_tci;
-		};
-	};
-
-as a temporary storage for the VLAN hwaccel tag, or the DSA hwaccel tag.
-If this is a DSA master it's a DSA hwaccel tag, and finally clears up
-the skb VLAN hwaccel header.
-
-I'm guessing that the problem is the (mis)use of API.
-skb_vlan_tag_present() looks like this:
-
- #define skb_vlan_tag_present(__skb)	(!!(__skb)->vlan_all)
-
-So if both vlan_proto and vlan_tci are zeroes, skb_vlan_tag_present()
-returns precisely false. I don't know for sure what is the format of the
-DSA hwaccel tag, but I surely know that lowermost 3 bits of vlan_proto
-are 0 when receiving from port 0:
-
-	unsigned int port = vlan_proto & GENMASK(2, 0);
-
-If the RX descriptor has no other bits set to non-zero values in
-RX_DMA_VTAG, then the call to __vlan_hwaccel_put_tag() will not, in
-fact, make the subsequent skb_vlan_tag_present() return true, because
-it's implemented like this:
-
-static inline void __vlan_hwaccel_put_tag(struct sk_buff *skb,
-					  __be16 vlan_proto, u16 vlan_tci)
-{
-	skb->vlan_proto = vlan_proto;
-	skb->vlan_tci = vlan_tci;
-}
-
-What we need to do to fix this problem (assuming this is the problem) is
-to stop using skb->vlan_all as temporary storage for driver affairs, and
-just create some local variables that serve the same purpose, but
-hopefully better. Instead of calling skb_vlan_tag_present(), let's look
-at a boolean has_hwaccel_tag which we set to true when the RX DMA
-descriptors have something. Disambiguate based on netdev_uses_dsa()
-whether this is a VLAN or DSA hwaccel tag, and only call
-__vlan_hwaccel_put_tag() if we're certain it's a VLAN tag.
-
-Arınç confirms that the treatment works, so this validates the
-assumption.
-
-Link: https://lore.kernel.org/netdev/704f3a72-fc9e-714a-db54-272e17612637@arinc9.com/
-Fixes: 2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging")
-Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1876,7 +1876,9 @@ static int mtk_poll_rx(struct napi_struc
- 
- 	while (done < budget) {
- 		unsigned int pktlen, *rxdcsum;
-+		bool has_hwaccel_tag = false;
- 		struct net_device *netdev;
-+		u16 vlan_proto, vlan_tci;
- 		dma_addr_t dma_addr;
- 		u32 hash, reason;
- 		int mac = 0;
-@@ -2016,27 +2018,29 @@ static int mtk_poll_rx(struct napi_struc
- 
- 		if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) {
- 			if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
--				if (trxd.rxd3 & RX_DMA_VTAG_V2)
--					__vlan_hwaccel_put_tag(skb,
--						htons(RX_DMA_VPID(trxd.rxd4)),
--						RX_DMA_VID(trxd.rxd4));
-+				if (trxd.rxd3 & RX_DMA_VTAG_V2) {
-+					vlan_proto = RX_DMA_VPID(trxd.rxd4);
-+					vlan_tci = RX_DMA_VID(trxd.rxd4);
-+					has_hwaccel_tag = true;
-+				}
- 			} else if (trxd.rxd2 & RX_DMA_VTAG) {
--				__vlan_hwaccel_put_tag(skb, htons(RX_DMA_VPID(trxd.rxd3)),
--						       RX_DMA_VID(trxd.rxd3));
-+				vlan_proto = RX_DMA_VPID(trxd.rxd3);
-+				vlan_tci = RX_DMA_VID(trxd.rxd3);
-+				has_hwaccel_tag = true;
- 			}
- 		}
- 
- 		/* When using VLAN untagging in combination with DSA, the
- 		 * hardware treats the MTK special tag as a VLAN and untags it.
- 		 */
--		if (skb_vlan_tag_present(skb) && netdev_uses_dsa(netdev)) {
--			unsigned int port = ntohs(skb->vlan_proto) & GENMASK(2, 0);
-+		if (has_hwaccel_tag && netdev_uses_dsa(netdev)) {
-+			unsigned int port = vlan_proto & GENMASK(2, 0);
- 
- 			if (port < ARRAY_SIZE(eth->dsa_meta) &&
- 			    eth->dsa_meta[port])
- 				skb_dst_set_noref(skb, &eth->dsa_meta[port]->dst);
--
--			__vlan_hwaccel_clear_tag(skb);
-+		} else if (has_hwaccel_tag) {
-+			__vlan_hwaccel_put_tag(skb, htons(vlan_proto), vlan_tci);
- 		}
- 
- 		skb_record_rx_queue(skb, 0);
diff --git a/target/linux/generic/backport-6.1/730-15-v6.3-net-ethernet-mtk_wed-No-need-to-clear-memory-after-a.patch b/target/linux/generic/backport-6.1/730-15-v6.3-net-ethernet-mtk_wed-No-need-to-clear-memory-after-a.patch
deleted file mode 100644
index a3bb1c5db77e..000000000000
--- a/target/linux/generic/backport-6.1/730-15-v6.3-net-ethernet-mtk_wed-No-need-to-clear-memory-after-a.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
-Date: Sun, 12 Feb 2023 07:51:51 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: No need to clear memory after a
- dma_alloc_coherent() call
-
-dma_alloc_coherent() already clears the allocated memory, there is no need
-to explicitly call memset().
-
-Moreover, it is likely that the size in the memset() is incorrect and
-should be "size * sizeof(*ring->desc)".
-
-Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
-Link: https://lore.kernel.org/r/d5acce7dd108887832c9719f62c7201b4c83b3fb.1676184599.git.christophe.jaillet@wanadoo.fr
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -779,7 +779,6 @@ mtk_wed_rro_ring_alloc(struct mtk_wed_de
- 
- 	ring->desc_size = sizeof(*ring->desc);
- 	ring->size = size;
--	memset(ring->desc, 0, size);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-6.1/730-16-v6.3-net-ethernet-mtk_wed-fix-some-possible-NULL-pointer-.patch b/target/linux/generic/backport-6.1/730-16-v6.3-net-ethernet-mtk_wed-fix-some-possible-NULL-pointer-.patch
deleted file mode 100644
index e043a681da40..000000000000
--- a/target/linux/generic/backport-6.1/730-16-v6.3-net-ethernet-mtk_wed-fix-some-possible-NULL-pointer-.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Wed, 7 Dec 2022 15:04:54 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: fix some possible NULL pointer
- dereferences
-
-Fix possible NULL pointer dereference in mtk_wed_detach routine checking
-wo pointer is properly allocated before running mtk_wed_wo_reset() and
-mtk_wed_wo_deinit().
-Even if it is just a theoretical issue at the moment check wo pointer is
-not NULL in mtk_wed_mcu_msg_update.
-Moreover, honor mtk_wed_mcu_send_msg return value in mtk_wed_wo_reset()
-
-Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
-Fixes: 4c5de09eb0d0 ("net: ethernet: mtk_wed: add configure wed wo support")
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -174,9 +174,10 @@ mtk_wed_wo_reset(struct mtk_wed_device *
- 	mtk_wdma_tx_reset(dev);
- 	mtk_wed_reset(dev, MTK_WED_RESET_WED);
- 
--	mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO,
--			     MTK_WED_WO_CMD_CHANGE_STATE, &state,
--			     sizeof(state), false);
-+	if (mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO,
-+				 MTK_WED_WO_CMD_CHANGE_STATE, &state,
-+				 sizeof(state), false))
-+		return;
- 
- 	if (readx_poll_timeout(mtk_wed_wo_read_status, dev, val,
- 			       val == MTK_WED_WOIF_DISABLE_DONE,
-@@ -632,9 +633,11 @@ mtk_wed_detach(struct mtk_wed_device *de
- 	mtk_wed_free_tx_rings(dev);
- 
- 	if (mtk_wed_get_rx_capa(dev)) {
--		mtk_wed_wo_reset(dev);
-+		if (hw->wed_wo)
-+			mtk_wed_wo_reset(dev);
- 		mtk_wed_free_rx_rings(dev);
--		mtk_wed_wo_deinit(hw);
-+		if (hw->wed_wo)
-+			mtk_wed_wo_deinit(hw);
- 	}
- 
- 	if (dev->wlan.bus_type == MTK_WED_BUS_PCIE) {
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -207,6 +207,9 @@ int mtk_wed_mcu_msg_update(struct mtk_we
- 	if (dev->hw->version == 1)
- 		return 0;
- 
-+	if (WARN_ON(!wo))
-+		return -ENODEV;
-+
- 	return mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO, id, data, len,
- 				    true);
- }
diff --git a/target/linux/generic/backport-6.1/730-17-v6.3-net-ethernet-mtk_wed-fix-possible-deadlock-if-mtk_we.patch b/target/linux/generic/backport-6.1/730-17-v6.3-net-ethernet-mtk_wed-fix-possible-deadlock-if-mtk_we.patch
deleted file mode 100644
index 0afe7106e547..000000000000
--- a/target/linux/generic/backport-6.1/730-17-v6.3-net-ethernet-mtk_wed-fix-possible-deadlock-if-mtk_we.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Wed, 7 Dec 2022 15:04:55 +0100
-Subject: [PATCH] net: ethernet: mtk_wed: fix possible deadlock if
- mtk_wed_wo_init fails
-
-Introduce __mtk_wed_detach() in order to avoid a deadlock in
-mtk_wed_attach routine if mtk_wed_wo_init fails since both
-mtk_wed_attach and mtk_wed_detach run holding hw_lock mutex.
-
-Fixes: 4c5de09eb0d0 ("net: ethernet: mtk_wed: add configure wed wo support")
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -619,12 +619,10 @@ mtk_wed_deinit(struct mtk_wed_device *de
- }
- 
- static void
--mtk_wed_detach(struct mtk_wed_device *dev)
-+__mtk_wed_detach(struct mtk_wed_device *dev)
- {
- 	struct mtk_wed_hw *hw = dev->hw;
- 
--	mutex_lock(&hw_lock);
--
- 	mtk_wed_deinit(dev);
- 
- 	mtk_wdma_rx_reset(dev);
-@@ -657,6 +655,13 @@ mtk_wed_detach(struct mtk_wed_device *de
- 	module_put(THIS_MODULE);
- 
- 	hw->wed_dev = NULL;
-+}
-+
-+static void
-+mtk_wed_detach(struct mtk_wed_device *dev)
-+{
-+	mutex_lock(&hw_lock);
-+	__mtk_wed_detach(dev);
- 	mutex_unlock(&hw_lock);
- }
- 
-@@ -1538,8 +1543,10 @@ mtk_wed_attach(struct mtk_wed_device *de
- 		ret = mtk_wed_wo_init(hw);
- 	}
- out:
--	if (ret)
--		mtk_wed_detach(dev);
-+	if (ret) {
-+		dev_err(dev->hw->dev, "failed to attach wed device\n");
-+		__mtk_wed_detach(dev);
-+	}
- unlock:
- 	mutex_unlock(&hw_lock);
- 
diff --git a/target/linux/generic/backport-6.1/730-18-v6.3-net-ethernet-mtk_eth_soc-fix-tx-throughput-regressio.patch b/target/linux/generic/backport-6.1/730-18-v6.3-net-ethernet-mtk_eth_soc-fix-tx-throughput-regressio.patch
deleted file mode 100644
index f6d91d30806d..000000000000
--- a/target/linux/generic/backport-6.1/730-18-v6.3-net-ethernet-mtk_eth_soc-fix-tx-throughput-regressio.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 24 Mar 2023 14:56:58 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix tx throughput regression with
- direct 1G links
-
-Using the QDMA tx scheduler to throttle tx to line speed works fine for
-switch ports, but apparently caused a regression on non-switch ports.
-
-Based on a number of tests, it seems that this throttling can be safely
-dropped without re-introducing the issues on switch ports that the
-tx scheduling changes resolved.
-
-Link: https://lore.kernel.org/netdev/trinity-92c3826f-c2c8-40af-8339-bc6d0d3ffea4-1678213958520@3c-app-gmx-bs16/
-Fixes: f63959c7eec3 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
-Reported-by: Frank Wunderlich <frank-w@public-files.de>
-Reported-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -718,8 +718,6 @@ static void mtk_mac_link_up(struct phyli
- 		break;
- 	}
- 
--	mtk_set_queue_speed(mac->hw, mac->id, speed);
--
- 	/* Configure duplex */
- 	if (duplex == DUPLEX_FULL)
- 		mcr |= MAC_MCR_FORCE_DPX;
diff --git a/target/linux/generic/backport-6.1/733-v6.2-02-net-mtk_eth_soc-add-definitions-for-PCS.patch b/target/linux/generic/backport-6.1/733-v6.2-02-net-mtk_eth_soc-add-definitions-for-PCS.patch
deleted file mode 100644
index 850b806410ca..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-02-net-mtk_eth_soc-add-definitions-for-PCS.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From b6a709cb51f7bdc55c01cec886098a9753ce8c28 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:10:42 +0100
-Subject: [PATCH 01/10] net: mtk_eth_soc: add definitions for PCS
-
-As a result of help from Frank Wunderlich to investigate and test, we
-know a bit more about the PCS on the Mediatek platforms. Update the
-definitions from this investigation.
-
-This PCS appears similar, but not identical to the Lynx PCS.
-
-Although not included in this patch, but for future reference, the PHY
-ID registers at offset 4 read as 0x4d544950 'MTIP'.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 13 ++++++++++---
- 1 file changed, 10 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -504,8 +504,10 @@
- #define ETHSYS_DMA_AG_MAP_PPE	BIT(2)
- 
- /* SGMII subsystem config registers */
--/* Register to auto-negotiation restart */
-+/* BMCR (low 16) BMSR (high 16) */
- #define SGMSYS_PCS_CONTROL_1	0x0
-+#define SGMII_BMCR		GENMASK(15, 0)
-+#define SGMII_BMSR		GENMASK(31, 16)
- #define SGMII_AN_RESTART	BIT(9)
- #define SGMII_ISOLATE		BIT(10)
- #define SGMII_AN_ENABLE		BIT(12)
-@@ -515,13 +517,18 @@
- #define SGMII_PCS_FAULT		BIT(23)
- #define SGMII_AN_EXPANSION_CLR	BIT(30)
- 
-+#define SGMSYS_PCS_ADVERTISE	0x8
-+#define SGMII_ADVERTISE		GENMASK(15, 0)
-+#define SGMII_LPA		GENMASK(31, 16)
-+
- /* Register to programmable link timer, the unit in 2 * 8ns */
- #define SGMSYS_PCS_LINK_TIMER	0x18
--#define SGMII_LINK_TIMER_DEFAULT	(0x186a0 & GENMASK(19, 0))
-+#define SGMII_LINK_TIMER_MASK	GENMASK(19, 0)
-+#define SGMII_LINK_TIMER_DEFAULT	(0x186a0 & SGMII_LINK_TIMER_MASK)
- 
- /* Register to control remote fault */
- #define SGMSYS_SGMII_MODE		0x20
--#define SGMII_IF_MODE_BIT0		BIT(0)
-+#define SGMII_IF_MODE_SGMII		BIT(0)
- #define SGMII_SPEED_DUPLEX_AN		BIT(1)
- #define SGMII_SPEED_MASK		GENMASK(3, 2)
- #define SGMII_SPEED_10			FIELD_PREP(SGMII_SPEED_MASK, 0)
diff --git a/target/linux/generic/backport-6.1/733-v6.2-03-net-mtk_eth_soc-eliminate-unnecessary-error-handling.patch b/target/linux/generic/backport-6.1/733-v6.2-03-net-mtk_eth_soc-eliminate-unnecessary-error-handling.patch
deleted file mode 100644
index 4ea428c9d6b1..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-03-net-mtk_eth_soc-eliminate-unnecessary-error-handling.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 5cf7797526ee81bea0f627bccaa3d887f48f53e0 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:10:47 +0100
-Subject: [PATCH 02/10] net: mtk_eth_soc: eliminate unnecessary error handling
-
-The functions called by the pcs_config() method always return zero, so
-there is no point trying to handle an error from these functions. Make
-these functions void, eliminate the "err" variable and simply return
-zero from the pcs_config() function itself.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 18 ++++++------------
- 1 file changed, 6 insertions(+), 12 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -20,7 +20,7 @@ static struct mtk_pcs *pcs_to_mtk_pcs(st
- }
- 
- /* For SGMII interface mode */
--static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
-+static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
- {
- 	unsigned int val;
- 
-@@ -39,16 +39,13 @@ static int mtk_pcs_setup_mode_an(struct
- 	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
- 	val &= ~SGMII_PHYA_PWD;
- 	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
--
--	return 0;
--
- }
- 
- /* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
-  * fixed speed.
-  */
--static int mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
--				    phy_interface_t interface)
-+static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
-+				     phy_interface_t interface)
- {
- 	unsigned int val;
- 
-@@ -73,8 +70,6 @@ static int mtk_pcs_setup_mode_force(stru
- 	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
- 	val &= ~SGMII_PHYA_PWD;
- 	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
--
--	return 0;
- }
- 
- static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-@@ -83,15 +78,14 @@ static int mtk_pcs_config(struct phylink
- 			  bool permit_pause_to_mac)
- {
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
--	int err = 0;
- 
- 	/* Setup SGMIISYS with the determined property */
- 	if (interface != PHY_INTERFACE_MODE_SGMII)
--		err = mtk_pcs_setup_mode_force(mpcs, interface);
-+		mtk_pcs_setup_mode_force(mpcs, interface);
- 	else if (phylink_autoneg_inband(mode))
--		err = mtk_pcs_setup_mode_an(mpcs);
-+		mtk_pcs_setup_mode_an(mpcs);
- 
--	return err;
-+	return 0;
- }
- 
- static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
diff --git a/target/linux/generic/backport-6.1/733-v6.2-04-net-mtk_eth_soc-add-pcs_get_state-implementation.patch b/target/linux/generic/backport-6.1/733-v6.2-04-net-mtk_eth_soc-add-pcs_get_state-implementation.patch
deleted file mode 100644
index 64a4a72fa6ae..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-04-net-mtk_eth_soc-add-pcs_get_state-implementation.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From c000dca098002da193b98099df051c9ead0cacb4 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:10:52 +0100
-Subject: [PATCH 03/10] net: mtk_eth_soc: add pcs_get_state() implementation
-
-Add a pcs_get_state() implementation which uses the advertisements
-to compute the resulting link modes, and BMSR contents to determine
-negotiation and link status.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -19,6 +19,20 @@ static struct mtk_pcs *pcs_to_mtk_pcs(st
- 	return container_of(pcs, struct mtk_pcs, pcs);
- }
- 
-+static void mtk_pcs_get_state(struct phylink_pcs *pcs,
-+			      struct phylink_link_state *state)
-+{
-+	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
-+	unsigned int bm, adv;
-+
-+	/* Read the BMSR and LPA */
-+	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &bm);
-+	regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv);
-+
-+	phylink_mii_c22_pcs_decode_state(state, FIELD_GET(SGMII_BMSR, bm),
-+					 FIELD_GET(SGMII_LPA, adv));
-+}
-+
- /* For SGMII interface mode */
- static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
- {
-@@ -117,6 +131,7 @@ static void mtk_pcs_link_up(struct phyli
- }
- 
- static const struct phylink_pcs_ops mtk_pcs_ops = {
-+	.pcs_get_state = mtk_pcs_get_state,
- 	.pcs_config = mtk_pcs_config,
- 	.pcs_an_restart = mtk_pcs_restart_an,
- 	.pcs_link_up = mtk_pcs_link_up,
diff --git a/target/linux/generic/backport-6.1/733-v6.2-05-net-mtk_eth_soc-convert-mtk_sgmii-to-use-regmap_upda.patch b/target/linux/generic/backport-6.1/733-v6.2-05-net-mtk_eth_soc-convert-mtk_sgmii-to-use-regmap_upda.patch
deleted file mode 100644
index 24610fe11e1f..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-05-net-mtk_eth_soc-convert-mtk_sgmii-to-use-regmap_upda.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From 0d2351dc2768061689abd4de1529fa206bbd574e Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:10:58 +0100
-Subject: [PATCH 04/10] net: mtk_eth_soc: convert mtk_sgmii to use
- regmap_update_bits()
-
-mtk_sgmii does a lot of read-modify-write operations, for which there
-is a specific regmap function. Use this function instead of open-coding
-the operations.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 61 ++++++++++-------------
- 1 file changed, 26 insertions(+), 35 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -36,23 +36,18 @@ static void mtk_pcs_get_state(struct phy
- /* For SGMII interface mode */
- static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
- {
--	unsigned int val;
--
- 	/* Setup the link timer and QPHY power up inside SGMIISYS */
- 	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
- 		     SGMII_LINK_TIMER_DEFAULT);
- 
--	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
--	val |= SGMII_REMOTE_FAULT_DIS;
--	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
--
--	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
--	val |= SGMII_AN_RESTART;
--	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
--
--	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
--	val &= ~SGMII_PHYA_PWD;
--	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
-+	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
-+			   SGMII_REMOTE_FAULT_DIS, SGMII_REMOTE_FAULT_DIS);
-+
-+	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
-+			   SGMII_AN_RESTART, SGMII_AN_RESTART);
-+
-+	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
-+			   SGMII_PHYA_PWD, 0);
- }
- 
- /* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
-@@ -61,29 +56,26 @@ static void mtk_pcs_setup_mode_an(struct
- static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
- 				     phy_interface_t interface)
- {
--	unsigned int val;
-+	unsigned int rgc3;
- 
--	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
--	val &= ~RG_PHY_SPEED_MASK;
- 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
--		val |= RG_PHY_SPEED_3_125G;
--	regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);
-+		rgc3 = RG_PHY_SPEED_3_125G;
-+
-+	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
-+			   RG_PHY_SPEED_3_125G, rgc3);
- 
- 	/* Disable SGMII AN */
--	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
--	val &= ~SGMII_AN_ENABLE;
--	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
-+	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
-+			   SGMII_AN_ENABLE, 0);
- 
- 	/* Set the speed etc but leave the duplex unchanged */
--	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
--	val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK;
--	val |= SGMII_SPEED_1000;
--	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
-+	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
-+			   SGMII_IF_MODE_MASK & ~SGMII_DUPLEX_FULL,
-+			   SGMII_SPEED_1000);
- 
- 	/* Release PHYA power down state */
--	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
--	val &= ~SGMII_PHYA_PWD;
--	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
-+	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
-+			   SGMII_PHYA_PWD, 0);
- }
- 
- static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-@@ -105,29 +97,28 @@ static int mtk_pcs_config(struct phylink
- static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
- {
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
--	unsigned int val;
- 
--	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
--	val |= SGMII_AN_RESTART;
--	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
-+	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
-+			   SGMII_AN_RESTART, SGMII_AN_RESTART);
- }
- 
- static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
- 			    phy_interface_t interface, int speed, int duplex)
- {
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
--	unsigned int val;
-+	unsigned int sgm_mode;
- 
- 	if (!phy_interface_mode_is_8023z(interface))
- 		return;
- 
- 	/* SGMII force duplex setting */
--	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
--	val &= ~SGMII_DUPLEX_FULL;
- 	if (duplex == DUPLEX_FULL)
--		val |= SGMII_DUPLEX_FULL;
-+		sgm_mode = SGMII_DUPLEX_FULL;
-+	else
-+		sgm_mode = 0;
- 
--	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
-+	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
-+			   SGMII_DUPLEX_FULL, sgm_mode);
- }
- 
- static const struct phylink_pcs_ops mtk_pcs_ops = {
diff --git a/target/linux/generic/backport-6.1/733-v6.2-06-net-mtk_eth_soc-add-out-of-band-forcing-of-speed-and.patch b/target/linux/generic/backport-6.1/733-v6.2-06-net-mtk_eth_soc-add-out-of-band-forcing-of-speed-and.patch
deleted file mode 100644
index ba76ca40ffaa..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-06-net-mtk_eth_soc-add-out-of-band-forcing-of-speed-and.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 12198c3a410fe69843e335c1bbf6d4c2a4d48e4e Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:11:03 +0100
-Subject: [PATCH 05/10] net: mtk_eth_soc: add out of band forcing of speed and
- duplex in pcs_link_up
-
-Add support for forcing the link speed and duplex setting in the
-pcs_link_up() method for out of band modes, which will be useful when
-we finish converting the pcs_config() method. Until then, we still have
-to force duplex for 802.3z modes to work correctly.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 28 ++++++++++++++---------
- 1 file changed, 17 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -108,17 +108,23 @@ static void mtk_pcs_link_up(struct phyli
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
- 	unsigned int sgm_mode;
- 
--	if (!phy_interface_mode_is_8023z(interface))
--		return;
-+	if (!phylink_autoneg_inband(mode) ||
-+	    phy_interface_mode_is_8023z(interface)) {
-+		/* Force the speed and duplex setting */
-+		if (speed == SPEED_10)
-+			sgm_mode = SGMII_SPEED_10;
-+		else if (speed == SPEED_100)
-+			sgm_mode = SGMII_SPEED_100;
-+		else
-+			sgm_mode = SGMII_SPEED_1000;
- 
--	/* SGMII force duplex setting */
--	if (duplex == DUPLEX_FULL)
--		sgm_mode = SGMII_DUPLEX_FULL;
--	else
--		sgm_mode = 0;
-+		if (duplex == DUPLEX_FULL)
-+			sgm_mode |= SGMII_DUPLEX_FULL;
- 
--	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
--			   SGMII_DUPLEX_FULL, sgm_mode);
-+		regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
-+				   SGMII_DUPLEX_FULL | SGMII_SPEED_MASK,
-+				   sgm_mode);
-+	}
- }
- 
- static const struct phylink_pcs_ops mtk_pcs_ops = {
diff --git a/target/linux/generic/backport-6.1/733-v6.2-07-net-mtk_eth_soc-move-PHY-power-up.patch b/target/linux/generic/backport-6.1/733-v6.2-07-net-mtk_eth_soc-move-PHY-power-up.patch
deleted file mode 100644
index b76e15927505..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-07-net-mtk_eth_soc-move-PHY-power-up.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 6f38fffe2179dd29612aea2c67c46ed6682b4e46 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:11:08 +0100
-Subject: [PATCH 06/10] net: mtk_eth_soc: move PHY power up
-
-The PHY power up is common to both configuration paths, so move it into
-the parent function. We need to do this for all serdes modes.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 11 ++++-------
- 1 file changed, 4 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -45,9 +45,6 @@ static void mtk_pcs_setup_mode_an(struct
- 
- 	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
- 			   SGMII_AN_RESTART, SGMII_AN_RESTART);
--
--	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
--			   SGMII_PHYA_PWD, 0);
- }
- 
- /* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
-@@ -72,10 +69,6 @@ static void mtk_pcs_setup_mode_force(str
- 	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
- 			   SGMII_IF_MODE_MASK & ~SGMII_DUPLEX_FULL,
- 			   SGMII_SPEED_1000);
--
--	/* Release PHYA power down state */
--	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
--			   SGMII_PHYA_PWD, 0);
- }
- 
- static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-@@ -91,6 +84,10 @@ static int mtk_pcs_config(struct phylink
- 	else if (phylink_autoneg_inband(mode))
- 		mtk_pcs_setup_mode_an(mpcs);
- 
-+	/* Release PHYA power down state */
-+	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
-+			   SGMII_PHYA_PWD, 0);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-6.1/733-v6.2-08-net-mtk_eth_soc-move-interface-speed-selection.patch b/target/linux/generic/backport-6.1/733-v6.2-08-net-mtk_eth_soc-move-interface-speed-selection.patch
deleted file mode 100644
index cd9f0699b3eb..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-08-net-mtk_eth_soc-move-interface-speed-selection.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From f752c0df13dfeb721c11d3debb79f08cf437344f Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:11:13 +0100
-Subject: [PATCH 07/10] net: mtk_eth_soc: move interface speed selection
-
-Move the selection of the underlying interface speed to the pcs_config
-function, so we always program the interface speed.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 18 ++++++++++--------
- 1 file changed, 10 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -53,14 +53,6 @@ static void mtk_pcs_setup_mode_an(struct
- static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
- 				     phy_interface_t interface)
- {
--	unsigned int rgc3;
--
--	if (interface == PHY_INTERFACE_MODE_2500BASEX)
--		rgc3 = RG_PHY_SPEED_3_125G;
--
--	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
--			   RG_PHY_SPEED_3_125G, rgc3);
--
- 	/* Disable SGMII AN */
- 	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
- 			   SGMII_AN_ENABLE, 0);
-@@ -77,6 +69,16 @@ static int mtk_pcs_config(struct phylink
- 			  bool permit_pause_to_mac)
- {
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
-+	unsigned int rgc3;
-+
-+	if (interface == PHY_INTERFACE_MODE_2500BASEX)
-+		rgc3 = RG_PHY_SPEED_3_125G;
-+	else
-+		rgc3 = 0;
-+
-+	/* Configure the underlying interface speed */
-+	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
-+			   RG_PHY_SPEED_3_125G, rgc3);
- 
- 	/* Setup SGMIISYS with the determined property */
- 	if (interface != PHY_INTERFACE_MODE_SGMII)
diff --git a/target/linux/generic/backport-6.1/733-v6.2-09-net-mtk_eth_soc-add-advertisement-programming.patch b/target/linux/generic/backport-6.1/733-v6.2-09-net-mtk_eth_soc-add-advertisement-programming.patch
deleted file mode 100644
index f08358e963d5..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-09-net-mtk_eth_soc-add-advertisement-programming.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From c125c66ea71b9377ae2478c4f1b87b180cc5c6ef Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:11:18 +0100
-Subject: [PATCH 08/10] net: mtk_eth_soc: add advertisement programming
-
-Program the advertisement into the mtk PCS block.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 13 ++++++++++++-
- 1 file changed, 12 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -70,16 +70,27 @@ static int mtk_pcs_config(struct phylink
- {
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
- 	unsigned int rgc3;
-+	int advertise;
-+	bool changed;
- 
- 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
- 		rgc3 = RG_PHY_SPEED_3_125G;
- 	else
- 		rgc3 = 0;
- 
-+	advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
-+							     advertising);
-+	if (advertise < 0)
-+		return advertise;
-+
- 	/* Configure the underlying interface speed */
- 	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
- 			   RG_PHY_SPEED_3_125G, rgc3);
- 
-+	/* Update the advertisement, noting whether it has changed */
-+	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
-+				 SGMII_ADVERTISE, advertise, &changed);
-+
- 	/* Setup SGMIISYS with the determined property */
- 	if (interface != PHY_INTERFACE_MODE_SGMII)
- 		mtk_pcs_setup_mode_force(mpcs, interface);
-@@ -90,7 +101,7 @@ static int mtk_pcs_config(struct phylink
- 	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
- 			   SGMII_PHYA_PWD, 0);
- 
--	return 0;
-+	return changed;
- }
- 
- static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
diff --git a/target/linux/generic/backport-6.1/733-v6.2-10-net-mtk_eth_soc-move-and-correct-link-timer-programm.patch b/target/linux/generic/backport-6.1/733-v6.2-10-net-mtk_eth_soc-move-and-correct-link-timer-programm.patch
deleted file mode 100644
index 602d52c6f46a..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-10-net-mtk_eth_soc-move-and-correct-link-timer-programm.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 3027d89f87707e7f3e5b683e0d37a32afb5bde96 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:11:23 +0100
-Subject: [PATCH 09/10] net: mtk_eth_soc: move and correct link timer
- programming
-
-Program the link timer appropriately for the interface mode being
-used, using the newly introduced phylink helper that provides the
-nanosecond link timer interval.
-
-The intervals are 1.6ms for SGMII based protocols and 10ms for
-802.3z based protocols.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 13 ++++++++-----
- 1 file changed, 8 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -36,10 +36,6 @@ static void mtk_pcs_get_state(struct phy
- /* For SGMII interface mode */
- static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
- {
--	/* Setup the link timer and QPHY power up inside SGMIISYS */
--	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
--		     SGMII_LINK_TIMER_DEFAULT);
--
- 	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
- 			   SGMII_REMOTE_FAULT_DIS, SGMII_REMOTE_FAULT_DIS);
- 
-@@ -69,8 +65,8 @@ static int mtk_pcs_config(struct phylink
- 			  bool permit_pause_to_mac)
- {
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
-+	int advertise, link_timer;
- 	unsigned int rgc3;
--	int advertise;
- 	bool changed;
- 
- 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
-@@ -83,6 +79,10 @@ static int mtk_pcs_config(struct phylink
- 	if (advertise < 0)
- 		return advertise;
- 
-+	link_timer = phylink_get_link_timer_ns(interface);
-+	if (link_timer < 0)
-+		return link_timer;
-+
- 	/* Configure the underlying interface speed */
- 	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
- 			   RG_PHY_SPEED_3_125G, rgc3);
-@@ -91,6 +91,9 @@ static int mtk_pcs_config(struct phylink
- 	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
- 				 SGMII_ADVERTISE, advertise, &changed);
- 
-+	/* Setup the link timer and QPHY power up inside SGMIISYS */
-+	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
-+
- 	/* Setup SGMIISYS with the determined property */
- 	if (interface != PHY_INTERFACE_MODE_SGMII)
- 		mtk_pcs_setup_mode_force(mpcs, interface);
diff --git a/target/linux/generic/backport-6.1/733-v6.2-11-net-mtk_eth_soc-add-support-for-in-band-802.3z-negot.patch b/target/linux/generic/backport-6.1/733-v6.2-11-net-mtk_eth_soc-add-support-for-in-band-802.3z-negot.patch
deleted file mode 100644
index 0e9a0535a7b2..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-11-net-mtk_eth_soc-add-support-for-in-band-802.3z-negot.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 81b0f12a2a8a1699a7d49c3995e5f71e4ec018e6 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 27 Oct 2022 14:11:28 +0100
-Subject: [PATCH 10/10] net: mtk_eth_soc: add support for in-band 802.3z
- negotiation
-
-As a result of help from Frank Wunderlich to investigate and test, we
-now know how to program this PCS for in-band 802.3z negotiation. Add
-support for this by moving the contents of the two functions into the
-common mtk_pcs_config() function and adding the register settings for
-802.3z negotiation.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 77 ++++++++++++-----------
- 1 file changed, 42 insertions(+), 35 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -33,41 +33,15 @@ static void mtk_pcs_get_state(struct phy
- 					 FIELD_GET(SGMII_LPA, adv));
- }
- 
--/* For SGMII interface mode */
--static void mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
--{
--	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
--			   SGMII_REMOTE_FAULT_DIS, SGMII_REMOTE_FAULT_DIS);
--
--	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
--			   SGMII_AN_RESTART, SGMII_AN_RESTART);
--}
--
--/* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
-- * fixed speed.
-- */
--static void mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
--				     phy_interface_t interface)
--{
--	/* Disable SGMII AN */
--	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
--			   SGMII_AN_ENABLE, 0);
--
--	/* Set the speed etc but leave the duplex unchanged */
--	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
--			   SGMII_IF_MODE_MASK & ~SGMII_DUPLEX_FULL,
--			   SGMII_SPEED_1000);
--}
--
- static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
- 			  phy_interface_t interface,
- 			  const unsigned long *advertising,
- 			  bool permit_pause_to_mac)
- {
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
-+	unsigned int rgc3, sgm_mode, bmcr;
- 	int advertise, link_timer;
--	unsigned int rgc3;
--	bool changed;
-+	bool changed, use_an;
- 
- 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
- 		rgc3 = RG_PHY_SPEED_3_125G;
-@@ -83,6 +57,37 @@ static int mtk_pcs_config(struct phylink
- 	if (link_timer < 0)
- 		return link_timer;
- 
-+	/* Clearing IF_MODE_BIT0 switches the PCS to BASE-X mode, and
-+	 * we assume that fixes it's speed at bitrate = line rate (in
-+	 * other words, 1000Mbps or 2500Mbps).
-+	 */
-+	if (interface == PHY_INTERFACE_MODE_SGMII) {
-+		sgm_mode = SGMII_IF_MODE_SGMII;
-+		if (phylink_autoneg_inband(mode)) {
-+			sgm_mode |= SGMII_REMOTE_FAULT_DIS |
-+				    SGMII_SPEED_DUPLEX_AN;
-+			use_an = true;
-+		} else {
-+			use_an = false;
-+		}
-+	} else if (phylink_autoneg_inband(mode)) {
-+		/* 1000base-X or 2500base-X autoneg */
-+		sgm_mode = SGMII_REMOTE_FAULT_DIS;
-+		use_an = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+					   advertising);
-+	} else {
-+		/* 1000base-X or 2500base-X without autoneg */
-+		sgm_mode = 0;
-+		use_an = false;
-+	}
-+
-+	if (use_an) {
-+		/* FIXME: Do we need to set AN_RESTART here? */
-+		bmcr = SGMII_AN_RESTART | SGMII_AN_ENABLE;
-+	} else {
-+		bmcr = 0;
-+	}
-+
- 	/* Configure the underlying interface speed */
- 	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
- 			   RG_PHY_SPEED_3_125G, rgc3);
-@@ -94,11 +99,14 @@ static int mtk_pcs_config(struct phylink
- 	/* Setup the link timer and QPHY power up inside SGMIISYS */
- 	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
- 
--	/* Setup SGMIISYS with the determined property */
--	if (interface != PHY_INTERFACE_MODE_SGMII)
--		mtk_pcs_setup_mode_force(mpcs, interface);
--	else if (phylink_autoneg_inband(mode))
--		mtk_pcs_setup_mode_an(mpcs);
-+	/* Update the sgmsys mode register */
-+	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
-+			   SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN |
-+			   SGMII_IF_MODE_SGMII, sgm_mode);
-+
-+	/* Update the BMCR */
-+	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
-+			   SGMII_AN_RESTART | SGMII_AN_ENABLE, bmcr);
- 
- 	/* Release PHYA power down state */
- 	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
-@@ -121,8 +129,7 @@ static void mtk_pcs_link_up(struct phyli
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
- 	unsigned int sgm_mode;
- 
--	if (!phylink_autoneg_inband(mode) ||
--	    phy_interface_mode_is_8023z(interface)) {
-+	if (!phylink_autoneg_inband(mode)) {
- 		/* Force the speed and duplex setting */
- 		if (speed == SPEED_10)
- 			sgm_mode = SGMII_SPEED_10;
diff --git a/target/linux/generic/backport-6.1/733-v6.2-12-net-mediatek-sgmii-ensure-the-SGMII-PHY-is-powered-d.patch b/target/linux/generic/backport-6.1/733-v6.2-12-net-mediatek-sgmii-ensure-the-SGMII-PHY-is-powered-d.patch
deleted file mode 100644
index a02c583deba4..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-12-net-mediatek-sgmii-ensure-the-SGMII-PHY-is-powered-d.patch
+++ /dev/null
@@ -1,119 +0,0 @@
-From 7ff82416de8295c61423ef6fd75f052d3837d2f7 Mon Sep 17 00:00:00 2001
-From: Alexander Couzens <lynxis@fe80.eu>
-Date: Wed, 1 Feb 2023 19:23:29 +0100
-Subject: [PATCH 11/13] net: mediatek: sgmii: ensure the SGMII PHY is powered
- down on configuration
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The code expect the PHY to be in power down which is only true after reset.
-Allow changes of the SGMII parameters more than once.
-
-Only power down when reconfiguring to avoid bouncing the link when there's
-no reason to - based on code from Russell King.
-
-There are cases when the SGMII_PHYA_PWD register contains 0x9 which
-prevents SGMII from working. The SGMII still shows link but no traffic
-can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
-taken from a good working state of the SGMII interface.
-
-Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC")
-Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
-Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
-[ bmork: rebased and squashed into one patch ]
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Bjørn Mork <bjorn@mork.no>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h |  2 ++
- drivers/net/ethernet/mediatek/mtk_sgmii.c   | 39 +++++++++++++++------
- 2 files changed, 30 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1067,11 +1067,13 @@ struct mtk_soc_data {
-  * @regmap:            The register map pointing at the range used to setup
-  *                     SGMII modes
-  * @ana_rgc3:          The offset refers to register ANA_RGC3 related to regmap
-+ * @interface:         Currently configured interface mode
-  * @pcs:               Phylink PCS structure
-  */
- struct mtk_pcs {
- 	struct regmap	*regmap;
- 	u32             ana_rgc3;
-+	phy_interface_t	interface;
- 	struct phylink_pcs pcs;
- };
- 
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -43,11 +43,6 @@ static int mtk_pcs_config(struct phylink
- 	int advertise, link_timer;
- 	bool changed, use_an;
- 
--	if (interface == PHY_INTERFACE_MODE_2500BASEX)
--		rgc3 = RG_PHY_SPEED_3_125G;
--	else
--		rgc3 = 0;
--
- 	advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
- 							     advertising);
- 	if (advertise < 0)
-@@ -88,9 +83,22 @@ static int mtk_pcs_config(struct phylink
- 		bmcr = 0;
- 	}
- 
--	/* Configure the underlying interface speed */
--	regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
--			   RG_PHY_SPEED_3_125G, rgc3);
-+	if (mpcs->interface != interface) {
-+		/* PHYA power down */
-+		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
-+				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
-+
-+		if (interface == PHY_INTERFACE_MODE_2500BASEX)
-+			rgc3 = RG_PHY_SPEED_3_125G;
-+		else
-+			rgc3 = 0;
-+
-+		/* Configure the underlying interface speed */
-+		regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
-+				   RG_PHY_SPEED_3_125G, rgc3);
-+
-+		mpcs->interface = interface;
-+	}
- 
- 	/* Update the advertisement, noting whether it has changed */
- 	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
-@@ -108,9 +116,17 @@ static int mtk_pcs_config(struct phylink
- 	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
- 			   SGMII_AN_RESTART | SGMII_AN_ENABLE, bmcr);
- 
--	/* Release PHYA power down state */
--	regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
--			   SGMII_PHYA_PWD, 0);
-+	/* Release PHYA power down state
-+	 * Only removing bit SGMII_PHYA_PWD isn't enough.
-+	 * There are cases when the SGMII_PHYA_PWD register contains 0x9 which
-+	 * prevents SGMII from working. The SGMII still shows link but no traffic
-+	 * can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
-+	 * taken from a good working state of the SGMII interface.
-+	 * Unknown how much the QPHY needs but it is racy without a sleep.
-+	 * Tested on mt7622 & mt7986.
-+	 */
-+	usleep_range(50, 100);
-+	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
- 
- 	return changed;
- }
-@@ -171,6 +187,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss,
- 			return PTR_ERR(ss->pcs[i].regmap);
- 
- 		ss->pcs[i].pcs.ops = &mtk_pcs_ops;
-+		ss->pcs[i].interface = PHY_INTERFACE_MODE_NA;
- 	}
- 
- 	return 0;
diff --git a/target/linux/generic/backport-6.1/733-v6.2-13-net-mediatek-sgmii-fix-duplex-configuration.patch b/target/linux/generic/backport-6.1/733-v6.2-13-net-mediatek-sgmii-fix-duplex-configuration.patch
deleted file mode 100644
index a06298c0a9cc..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-13-net-mediatek-sgmii-fix-duplex-configuration.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 9d32637122de88f1ef614c29703f0e050cad342e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>
-Date: Wed, 1 Feb 2023 19:23:30 +0100
-Subject: [PATCH 12/13] net: mediatek: sgmii: fix duplex configuration
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The logic of the duplex bit is inverted.  Setting it means half
-duplex, not full duplex.
-
-Fix and rename macro to avoid confusion.
-
-Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Bjørn Mork <bjorn@mork.no>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +-
- drivers/net/ethernet/mediatek/mtk_sgmii.c   | 6 +++---
- 2 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -534,7 +534,7 @@
- #define SGMII_SPEED_10			FIELD_PREP(SGMII_SPEED_MASK, 0)
- #define SGMII_SPEED_100			FIELD_PREP(SGMII_SPEED_MASK, 1)
- #define SGMII_SPEED_1000		FIELD_PREP(SGMII_SPEED_MASK, 2)
--#define SGMII_DUPLEX_FULL		BIT(4)
-+#define SGMII_DUPLEX_HALF		BIT(4)
- #define SGMII_IF_MODE_BIT5		BIT(5)
- #define SGMII_REMOTE_FAULT_DIS		BIT(8)
- #define SGMII_CODE_SYNC_SET_VAL		BIT(9)
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -154,11 +154,11 @@ static void mtk_pcs_link_up(struct phyli
- 		else
- 			sgm_mode = SGMII_SPEED_1000;
- 
--		if (duplex == DUPLEX_FULL)
--			sgm_mode |= SGMII_DUPLEX_FULL;
-+		if (duplex != DUPLEX_FULL)
-+			sgm_mode |= SGMII_DUPLEX_HALF;
- 
- 		regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
--				   SGMII_DUPLEX_FULL | SGMII_SPEED_MASK,
-+				   SGMII_DUPLEX_HALF | SGMII_SPEED_MASK,
- 				   sgm_mode);
- 	}
- }
diff --git a/target/linux/generic/backport-6.1/733-v6.2-14-mtk_sgmii-enable-PCS-polling-to-allow-SFP-work.patch b/target/linux/generic/backport-6.1/733-v6.2-14-mtk_sgmii-enable-PCS-polling-to-allow-SFP-work.patch
deleted file mode 100644
index 56d7a1348fb1..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.2-14-mtk_sgmii-enable-PCS-polling-to-allow-SFP-work.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 3337a6e04ddf2923a1bdcf3d31b3b52412bf82dd Mon Sep 17 00:00:00 2001
-From: Alexander Couzens <lynxis@fe80.eu>
-Date: Wed, 1 Feb 2023 19:23:31 +0100
-Subject: [PATCH 13/13] mtk_sgmii: enable PCS polling to allow SFP work
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently there is no IRQ handling (even the SGMII supports it).
-Enable polling to support SFP ports.
-
-Fixes: 14a44ab0330d ("net: mtk_eth_soc: partially convert to phylink_pcs")
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
-[ bmork: changed "1" => "true" ]
-Signed-off-by: Bjørn Mork <bjorn@mork.no>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -187,6 +187,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss,
- 			return PTR_ERR(ss->pcs[i].regmap);
- 
- 		ss->pcs[i].pcs.ops = &mtk_pcs_ops;
-+		ss->pcs[i].pcs.poll = true;
- 		ss->pcs[i].interface = PHY_INTERFACE_MODE_NA;
- 	}
- 
diff --git a/target/linux/generic/backport-6.1/733-v6.3-15-net-ethernet-mtk_eth_soc-reset-PCS-state.patch b/target/linux/generic/backport-6.1/733-v6.3-15-net-ethernet-mtk_eth_soc-reset-PCS-state.patch
deleted file mode 100644
index 6acc62d4abca..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.3-15-net-ethernet-mtk_eth_soc-reset-PCS-state.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 611e2dabb4b3243d176739fd6a5a34d007fa3f86 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 14 Mar 2023 00:34:26 +0000
-Subject: [PATCH 1/2] net: ethernet: mtk_eth_soc: reset PCS state
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Reset the internal PCS state machine when changing interface mode.
-This prevents confusing the state machine when changing interface
-modes, e.g. from SGMII to 2500Base-X or vice-versa.
-
-Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Tested-by: Bjørn Mork <bjorn@mork.no>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++++
- drivers/net/ethernet/mediatek/mtk_sgmii.c   | 4 ++++
- 2 files changed, 8 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -542,6 +542,10 @@
- #define SGMII_SEND_AN_ERROR_EN		BIT(11)
- #define SGMII_IF_MODE_MASK		GENMASK(5, 1)
- 
-+/* Register to reset SGMII design */
-+#define SGMII_RESERVED_0	0x34
-+#define SGMII_SW_RESET		BIT(0)
-+
- /* Register to set SGMII speed, ANA RG_ Control Signals III*/
- #define SGMSYS_ANA_RG_CS3	0x2028
- #define RG_PHY_SPEED_MASK	(BIT(2) | BIT(3))
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -88,6 +88,10 @@ static int mtk_pcs_config(struct phylink
- 		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
- 				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
- 
-+		/* Reset SGMII PCS state */
-+		regmap_update_bits(mpcs->regmap, SGMII_RESERVED_0,
-+				   SGMII_SW_RESET, SGMII_SW_RESET);
-+
- 		if (interface == PHY_INTERFACE_MODE_2500BASEX)
- 			rgc3 = RG_PHY_SPEED_3_125G;
- 		else
diff --git a/target/linux/generic/backport-6.1/733-v6.3-16-net-ethernet-mtk_eth_soc-only-write-values-if-needed.patch b/target/linux/generic/backport-6.1/733-v6.3-16-net-ethernet-mtk_eth_soc-only-write-values-if-needed.patch
deleted file mode 100644
index 0fabeea20c07..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.3-16-net-ethernet-mtk_eth_soc-only-write-values-if-needed.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From 6e933a804c7db8be64f367f33e63cd7dcc302ebb Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 14 Mar 2023 00:34:45 +0000
-Subject: [PATCH 2/2] net: ethernet: mtk_eth_soc: only write values if needed
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Only restart auto-negotiation and write link timer if actually
-necessary. This prevents losing the link in case of minor
-changes.
-
-Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Tested-by: Bjørn Mork <bjorn@mork.no>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_sgmii.c | 24 +++++++++++------------
- 1 file changed, 12 insertions(+), 12 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -38,20 +38,16 @@ static int mtk_pcs_config(struct phylink
- 			  const unsigned long *advertising,
- 			  bool permit_pause_to_mac)
- {
-+	bool mode_changed = false, changed, use_an;
- 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
- 	unsigned int rgc3, sgm_mode, bmcr;
- 	int advertise, link_timer;
--	bool changed, use_an;
- 
- 	advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
- 							     advertising);
- 	if (advertise < 0)
- 		return advertise;
- 
--	link_timer = phylink_get_link_timer_ns(interface);
--	if (link_timer < 0)
--		return link_timer;
--
- 	/* Clearing IF_MODE_BIT0 switches the PCS to BASE-X mode, and
- 	 * we assume that fixes it's speed at bitrate = line rate (in
- 	 * other words, 1000Mbps or 2500Mbps).
-@@ -77,13 +73,16 @@ static int mtk_pcs_config(struct phylink
- 	}
- 
- 	if (use_an) {
--		/* FIXME: Do we need to set AN_RESTART here? */
--		bmcr = SGMII_AN_RESTART | SGMII_AN_ENABLE;
-+		bmcr = SGMII_AN_ENABLE;
- 	} else {
- 		bmcr = 0;
- 	}
- 
- 	if (mpcs->interface != interface) {
-+		link_timer = phylink_get_link_timer_ns(interface);
-+		if (link_timer < 0)
-+			return link_timer;
-+
- 		/* PHYA power down */
- 		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
- 				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
-@@ -101,16 +100,17 @@ static int mtk_pcs_config(struct phylink
- 		regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
- 				   RG_PHY_SPEED_3_125G, rgc3);
- 
-+		/* Setup the link timer */
-+		regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
-+
- 		mpcs->interface = interface;
-+		mode_changed = true;
- 	}
- 
- 	/* Update the advertisement, noting whether it has changed */
- 	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
- 				 SGMII_ADVERTISE, advertise, &changed);
- 
--	/* Setup the link timer and QPHY power up inside SGMIISYS */
--	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
--
- 	/* Update the sgmsys mode register */
- 	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
- 			   SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN |
-@@ -118,7 +118,7 @@ static int mtk_pcs_config(struct phylink
- 
- 	/* Update the BMCR */
- 	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
--			   SGMII_AN_RESTART | SGMII_AN_ENABLE, bmcr);
-+			   SGMII_AN_ENABLE, bmcr);
- 
- 	/* Release PHYA power down state
- 	 * Only removing bit SGMII_PHYA_PWD isn't enough.
-@@ -132,7 +132,7 @@ static int mtk_pcs_config(struct phylink
- 	usleep_range(50, 100);
- 	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
- 
--	return changed;
-+	return changed || mode_changed;
- }
- 
- static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
diff --git a/target/linux/generic/backport-6.1/733-v6.3-18-net-ethernet-mtk_eth_soc-add-support-for-MT7981.patch b/target/linux/generic/backport-6.1/733-v6.3-18-net-ethernet-mtk_eth_soc-add-support-for-MT7981.patch
deleted file mode 100644
index 3f3f73183e90..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.3-18-net-ethernet-mtk_eth_soc-add-support-for-MT7981.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From f5d43ddd334b7c32fcaed9ba46afbd85cb467f1f Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:56:28 +0000
-Subject: [PATCH] net: ethernet: mtk_eth_soc: add support for MT7981 SoC
-
-The MediaTek MT7981 SoC comes with two 1G/2.5G SGMII ports, just like
-MT7986.
-
-In addition MT7981 is equipped with a built-in 1000Base-T PHY which can
-be used with GMAC1.
-
-As many MT7981 boards make use of inverting SGMII signal polarity, add
-new device-tree attribute 'mediatek,pn_swap' to support them.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_path.c | 14 +++++++--
- drivers/net/ethernet/mediatek/mtk_eth_soc.c  | 21 +++++++++++++
- drivers/net/ethernet/mediatek/mtk_eth_soc.h  | 31 ++++++++++++++++++++
- drivers/net/ethernet/mediatek/mtk_sgmii.c    | 10 +++++++
- 4 files changed, 73 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_path.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_path.c
-@@ -96,12 +96,20 @@ static int set_mux_gmac2_gmac0_to_gephy(
- 
- static int set_mux_u3_gmac2_to_qphy(struct mtk_eth *eth, int path)
- {
--	unsigned int val = 0;
-+	unsigned int val = 0, mask = 0, reg = 0;
- 	bool updated = true;
- 
- 	switch (path) {
- 	case MTK_ETH_PATH_GMAC2_SGMII:
--		val = CO_QPHY_SEL;
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_U3_COPHY_V2)) {
-+			reg = USB_PHY_SWITCH_REG;
-+			val = SGMII_QPHY_SEL;
-+			mask = QPHY_SEL_MASK;
-+		} else {
-+			reg = INFRA_MISC2;
-+			val = CO_QPHY_SEL;
-+			mask = val;
-+		}
- 		break;
- 	default:
- 		updated = false;
-@@ -109,7 +117,7 @@ static int set_mux_u3_gmac2_to_qphy(stru
- 	}
- 
- 	if (updated)
--		regmap_update_bits(eth->infra, INFRA_MISC2, CO_QPHY_SEL, val);
-+		regmap_update_bits(eth->infra, reg, mask, val);
- 
- 	dev_dbg(eth->dev, "path %s in %s updated = %d\n",
- 		mtk_eth_path_name(path), __func__, updated);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4802,6 +4802,26 @@ static const struct mtk_soc_data mt7629_
- 	},
- };
- 
-+static const struct mtk_soc_data mt7981_data = {
-+	.reg_map = &mt7986_reg_map,
-+	.ana_rgc3 = 0x128,
-+	.caps = MT7981_CAPS,
-+	.hw_features = MTK_HW_FEATURES,
-+	.required_clks = MT7981_CLKS_BITMAP,
-+	.required_pctl = false,
-+	.offload_version = 2,
-+	.hash_offset = 4,
-+	.foe_entry_size = sizeof(struct mtk_foe_entry),
-+	.txrx = {
-+		.txd_size = sizeof(struct mtk_tx_dma_v2),
-+		.rxd_size = sizeof(struct mtk_rx_dma_v2),
-+		.rx_irq_done_mask = MTK_RX_DONE_INT_V2,
-+		.rx_dma_l4_valid = RX_DMA_L4_VALID_V2,
-+		.dma_max_len = MTK_TX_DMA_BUF_LEN_V2,
-+		.dma_len_offset = 8,
-+	},
-+};
-+
- static const struct mtk_soc_data mt7986_data = {
- 	.reg_map = &mt7986_reg_map,
- 	.ana_rgc3 = 0x128,
-@@ -4844,6 +4864,7 @@ const struct of_device_id of_mtk_match[]
- 	{ .compatible = "mediatek,mt7622-eth", .data = &mt7622_data},
- 	{ .compatible = "mediatek,mt7623-eth", .data = &mt7623_data},
- 	{ .compatible = "mediatek,mt7629-eth", .data = &mt7629_data},
-+	{ .compatible = "mediatek,mt7981-eth", .data = &mt7981_data},
- 	{ .compatible = "mediatek,mt7986-eth", .data = &mt7986_data},
- 	{ .compatible = "ralink,rt5350-eth", .data = &rt5350_data},
- 	{},
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -556,11 +556,22 @@
- #define SGMSYS_QPHY_PWR_STATE_CTRL 0xe8
- #define	SGMII_PHYA_PWD		BIT(4)
- 
-+/* Register to QPHY wrapper control */
-+#define SGMSYS_QPHY_WRAP_CTRL	0xec
-+#define SGMII_PN_SWAP_MASK	GENMASK(1, 0)
-+#define SGMII_PN_SWAP_TX_RX	(BIT(0) | BIT(1))
-+#define MTK_SGMII_FLAG_PN_SWAP	BIT(0)
-+
- /* Infrasys subsystem config registers */
- #define INFRA_MISC2            0x70c
- #define CO_QPHY_SEL            BIT(0)
- #define GEPHY_MAC_SEL          BIT(1)
- 
-+/* Top misc registers */
-+#define USB_PHY_SWITCH_REG	0x218
-+#define QPHY_SEL_MASK		GENMASK(1, 0)
-+#define SGMII_QPHY_SEL		0x2
-+
- /* MT7628/88 specific stuff */
- #define MT7628_PDMA_OFFSET	0x0800
- #define MT7628_SDM_OFFSET	0x0c00
-@@ -741,6 +752,17 @@ enum mtk_clks_map {
- 				 BIT(MTK_CLK_SGMII2_CDR_FB) | \
- 				 BIT(MTK_CLK_SGMII_CK) | \
- 				 BIT(MTK_CLK_ETH2PLL) | BIT(MTK_CLK_SGMIITOP))
-+#define MT7981_CLKS_BITMAP	(BIT(MTK_CLK_FE) | BIT(MTK_CLK_GP2) | BIT(MTK_CLK_GP1) | \
-+				 BIT(MTK_CLK_WOCPU0) | \
-+				 BIT(MTK_CLK_SGMII_TX_250M) | \
-+				 BIT(MTK_CLK_SGMII_RX_250M) | \
-+				 BIT(MTK_CLK_SGMII_CDR_REF) | \
-+				 BIT(MTK_CLK_SGMII_CDR_FB) | \
-+				 BIT(MTK_CLK_SGMII2_TX_250M) | \
-+				 BIT(MTK_CLK_SGMII2_RX_250M) | \
-+				 BIT(MTK_CLK_SGMII2_CDR_REF) | \
-+				 BIT(MTK_CLK_SGMII2_CDR_FB) | \
-+				 BIT(MTK_CLK_SGMII_CK))
- #define MT7986_CLKS_BITMAP	(BIT(MTK_CLK_FE) | BIT(MTK_CLK_GP2) | BIT(MTK_CLK_GP1) | \
- 				 BIT(MTK_CLK_WOCPU1) | BIT(MTK_CLK_WOCPU0) | \
- 				 BIT(MTK_CLK_SGMII_TX_250M) | \
-@@ -854,6 +876,7 @@ enum mkt_eth_capabilities {
- 	MTK_NETSYS_V2_BIT,
- 	MTK_SOC_MT7628_BIT,
- 	MTK_RSTCTRL_PPE1_BIT,
-+	MTK_U3_COPHY_V2_BIT,
- 
- 	/* MUX BITS*/
- 	MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT,
-@@ -888,6 +911,7 @@ enum mkt_eth_capabilities {
- #define MTK_NETSYS_V2		BIT(MTK_NETSYS_V2_BIT)
- #define MTK_SOC_MT7628		BIT(MTK_SOC_MT7628_BIT)
- #define MTK_RSTCTRL_PPE1	BIT(MTK_RSTCTRL_PPE1_BIT)
-+#define MTK_U3_COPHY_V2		BIT(MTK_U3_COPHY_V2_BIT)
- 
- #define MTK_ETH_MUX_GDM1_TO_GMAC1_ESW		\
- 	BIT(MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT)
-@@ -960,6 +984,11 @@ enum mkt_eth_capabilities {
- 		      MTK_MUX_U3_GMAC2_TO_QPHY | \
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA)
- 
-+#define MT7981_CAPS  (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | MTK_GMAC2_GEPHY | \
-+		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
-+		      MTK_MUX_U3_GMAC2_TO_QPHY | MTK_U3_COPHY_V2 | \
-+		      MTK_NETSYS_V2 | MTK_RSTCTRL_PPE1)
-+
- #define MT7986_CAPS  (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | \
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
- 		      MTK_NETSYS_V2 | MTK_RSTCTRL_PPE1)
-@@ -1073,12 +1102,14 @@ struct mtk_soc_data {
-  * @ana_rgc3:          The offset refers to register ANA_RGC3 related to regmap
-  * @interface:         Currently configured interface mode
-  * @pcs:               Phylink PCS structure
-+ * @flags:             Flags indicating hardware properties
-  */
- struct mtk_pcs {
- 	struct regmap	*regmap;
- 	u32             ana_rgc3;
- 	phy_interface_t	interface;
- 	struct phylink_pcs pcs;
-+	u32		flags;
- };
- 
- /* struct mtk_sgmii -  This is the structure holding sgmii regmap and its
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -87,6 +87,11 @@ static int mtk_pcs_config(struct phylink
- 		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
- 				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
- 
-+		if (mpcs->flags & MTK_SGMII_FLAG_PN_SWAP)
-+			regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_WRAP_CTRL,
-+					   SGMII_PN_SWAP_MASK,
-+					   SGMII_PN_SWAP_TX_RX);
-+
- 		/* Reset SGMII PCS state */
- 		regmap_update_bits(mpcs->regmap, SGMII_RESERVED_0,
- 				   SGMII_SW_RESET, SGMII_SW_RESET);
-@@ -186,6 +191,11 @@ int mtk_sgmii_init(struct mtk_sgmii *ss,
- 
- 		ss->pcs[i].ana_rgc3 = ana_rgc3;
- 		ss->pcs[i].regmap = syscon_node_to_regmap(np);
-+
-+		ss->pcs[i].flags = 0;
-+		if (of_property_read_bool(np, "mediatek,pnswap"))
-+			ss->pcs[i].flags |= MTK_SGMII_FLAG_PN_SWAP;
-+
- 		of_node_put(np);
- 		if (IS_ERR(ss->pcs[i].regmap))
- 			return PTR_ERR(ss->pcs[i].regmap);
diff --git a/target/linux/generic/backport-6.1/733-v6.3-19-net-ethernet-mtk_eth_soc-set-MDIO-bus-clock-frequenc.patch b/target/linux/generic/backport-6.1/733-v6.3-19-net-ethernet-mtk_eth_soc-set-MDIO-bus-clock-frequenc.patch
deleted file mode 100644
index c60a4337efe2..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.3-19-net-ethernet-mtk_eth_soc-set-MDIO-bus-clock-frequenc.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From c0a440031d4314d1023c1b87f43a4233634eebdb Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:57:15 +0000
-Subject: [PATCH] net: ethernet: mtk_eth_soc: set MDIO bus clock frequency
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Set MDIO bus clock frequency and allow setting a custom maximum
-frequency from device tree.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Tested-by: Bjørn Mork <bjorn@mork.no>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 21 +++++++++++++++++++++
- drivers/net/ethernet/mediatek/mtk_eth_soc.h |  7 +++++++
- 2 files changed, 28 insertions(+)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -743,8 +743,10 @@ static const struct phylink_mac_ops mtk_
- 
- static int mtk_mdio_init(struct mtk_eth *eth)
- {
-+	unsigned int max_clk = 2500000, divider;
- 	struct device_node *mii_np;
- 	int ret;
-+	u32 val;
- 
- 	mii_np = of_get_child_by_name(eth->dev->of_node, "mdio-bus");
- 	if (!mii_np) {
-@@ -771,6 +773,25 @@ static int mtk_mdio_init(struct mtk_eth
- 	eth->mii_bus->parent = eth->dev;
- 
- 	snprintf(eth->mii_bus->id, MII_BUS_ID_SIZE, "%pOFn", mii_np);
-+
-+	if (!of_property_read_u32(mii_np, "clock-frequency", &val)) {
-+		if (val > MDC_MAX_FREQ || val < MDC_MAX_FREQ / MDC_MAX_DIVIDER) {
-+			dev_err(eth->dev, "MDIO clock frequency out of range");
-+			ret = -EINVAL;
-+			goto err_put_node;
-+		}
-+		max_clk = val;
-+	}
-+	divider = min_t(unsigned int, DIV_ROUND_UP(MDC_MAX_FREQ, max_clk), 63);
-+
-+	/* Configure MDC Divider */
-+	val = mtk_r32(eth, MTK_PPSC);
-+	val &= ~PPSC_MDC_CFG;
-+	val |= FIELD_PREP(PPSC_MDC_CFG, divider) | PPSC_MDC_TURBO;
-+	mtk_w32(eth, val, MTK_PPSC);
-+
-+	dev_dbg(eth->dev, "MDC is running on %d Hz\n", MDC_MAX_FREQ / divider);
-+
- 	ret = of_mdiobus_register(eth->mii_bus, mii_np);
- 
- err_put_node:
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -363,6 +363,13 @@
- #define RX_DMA_VTAG_V2		BIT(0)
- #define RX_DMA_L4_VALID_V2	BIT(2)
- 
-+/* PHY Polling and SMI Master Control registers */
-+#define MTK_PPSC		0x10000
-+#define PPSC_MDC_CFG		GENMASK(29, 24)
-+#define PPSC_MDC_TURBO		BIT(20)
-+#define MDC_MAX_FREQ		25000000
-+#define MDC_MAX_DIVIDER		63
-+
- /* PHY Indirect Access Control registers */
- #define MTK_PHY_IAC		0x10004
- #define PHY_IAC_ACCESS		BIT(31)
diff --git a/target/linux/generic/backport-6.1/733-v6.3-20-net-ethernet-mtk_eth_soc-switch-to-external-PCS-driv.patch b/target/linux/generic/backport-6.1/733-v6.3-20-net-ethernet-mtk_eth_soc-switch-to-external-PCS-driv.patch
deleted file mode 100644
index d73eccedbbd2..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.3-20-net-ethernet-mtk_eth_soc-switch-to-external-PCS-driv.patch
+++ /dev/null
@@ -1,512 +0,0 @@
-From 2a3ec7ae313310c1092e4256208cc04d1958e469 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:58:02 +0000
-Subject: [PATCH] net: ethernet: mtk_eth_soc: switch to external PCS driver
-
-Now that we got a PCS driver, use it and remove the now redundant
-PCS code and it's header macros from the Ethernet driver.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/Kconfig       |   2 +
- drivers/net/ethernet/mediatek/Makefile      |   2 +-
- drivers/net/ethernet/mediatek/mtk_eth_soc.c |  61 +++++-
- drivers/net/ethernet/mediatek/mtk_eth_soc.h |  93 +--------
- drivers/net/ethernet/mediatek/mtk_sgmii.c   | 217 --------------------
- 5 files changed, 56 insertions(+), 319 deletions(-)
- delete mode 100644 drivers/net/ethernet/mediatek/mtk_sgmii.c
-
---- a/drivers/net/ethernet/mediatek/Kconfig
-+++ b/drivers/net/ethernet/mediatek/Kconfig
-@@ -19,6 +19,8 @@ config NET_MEDIATEK_SOC
- 	select DIMLIB
- 	select PAGE_POOL
- 	select PAGE_POOL_STATS
-+	select PCS_MTK_LYNXI
-+	select REGMAP_MMIO
- 	help
- 	  This driver supports the gigabit ethernet MACs in the
- 	  MediaTek SoC family.
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -4,7 +4,7 @@
- #
- 
- obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth.o
--mtk_eth-y := mtk_eth_soc.o mtk_sgmii.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o mtk_ppe_offload.o
-+mtk_eth-y := mtk_eth_soc.o mtk_eth_path.o mtk_ppe.o mtk_ppe_debugfs.o mtk_ppe_offload.o
- mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed.o mtk_wed_mcu.o mtk_wed_wo.o
- ifdef CONFIG_DEBUG_FS
- mtk_eth-$(CONFIG_NET_MEDIATEK_SOC_WED) += mtk_wed_debugfs.o
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -20,6 +20,7 @@
- #include <linux/interrupt.h>
- #include <linux/pinctrl/devinfo.h>
- #include <linux/phylink.h>
-+#include <linux/pcs/pcs-mtk-lynxi.h>
- #include <linux/jhash.h>
- #include <linux/bitfield.h>
- #include <net/dsa.h>
-@@ -400,7 +401,7 @@ static struct phylink_pcs *mtk_mac_selec
- 		sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ?
- 		       0 : mac->id;
- 
--		return mtk_sgmii_select_pcs(eth->sgmii, sid);
-+		return eth->sgmii_pcs[sid];
- 	}
- 
- 	return NULL;
-@@ -4015,8 +4016,17 @@ static int mtk_unreg_dev(struct mtk_eth
- 	return 0;
- }
- 
-+static void mtk_sgmii_destroy(struct mtk_eth *eth)
-+{
-+	int i;
-+
-+	for (i = 0; i < MTK_MAX_DEVS; i++)
-+		mtk_pcs_lynxi_destroy(eth->sgmii_pcs[i]);
-+}
-+
- static int mtk_cleanup(struct mtk_eth *eth)
- {
-+	mtk_sgmii_destroy(eth);
- 	mtk_unreg_dev(eth);
- 	mtk_free_dev(eth);
- 	cancel_work_sync(&eth->pending_work);
-@@ -4456,6 +4466,36 @@ void mtk_eth_set_dma_device(struct mtk_e
- 	rtnl_unlock();
- }
- 
-+static int mtk_sgmii_init(struct mtk_eth *eth)
-+{
-+	struct device_node *np;
-+	struct regmap *regmap;
-+	u32 flags;
-+	int i;
-+
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
-+		np = of_parse_phandle(eth->dev->of_node, "mediatek,sgmiisys", i);
-+		if (!np)
-+			break;
-+
-+		regmap = syscon_node_to_regmap(np);
-+		flags = 0;
-+		if (of_property_read_bool(np, "mediatek,pnswap"))
-+			flags |= MTK_SGMII_FLAG_PN_SWAP;
-+
-+		of_node_put(np);
-+
-+		if (IS_ERR(regmap))
-+			return PTR_ERR(regmap);
-+
-+		eth->sgmii_pcs[i] = mtk_pcs_lynxi_create(eth->dev, regmap,
-+							 eth->soc->ana_rgc3,
-+							 flags);
-+	}
-+
-+	return 0;
-+}
-+
- static int mtk_probe(struct platform_device *pdev)
- {
- 	struct resource *res = NULL;
-@@ -4519,13 +4559,7 @@ static int mtk_probe(struct platform_dev
- 	}
- 
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII)) {
--		eth->sgmii = devm_kzalloc(eth->dev, sizeof(*eth->sgmii),
--					  GFP_KERNEL);
--		if (!eth->sgmii)
--			return -ENOMEM;
--
--		err = mtk_sgmii_init(eth->sgmii, pdev->dev.of_node,
--				     eth->soc->ana_rgc3);
-+		err = mtk_sgmii_init(eth);
- 
- 		if (err)
- 			return err;
-@@ -4536,14 +4570,17 @@ static int mtk_probe(struct platform_dev
- 							    "mediatek,pctl");
- 		if (IS_ERR(eth->pctl)) {
- 			dev_err(&pdev->dev, "no pctl regmap found\n");
--			return PTR_ERR(eth->pctl);
-+			err = PTR_ERR(eth->pctl);
-+			goto err_destroy_sgmii;
- 		}
- 	}
- 
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
- 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--		if (!res)
--			return -EINVAL;
-+		if (!res) {
-+			err = -EINVAL;
-+			goto err_destroy_sgmii;
-+		}
- 	}
- 
- 	if (eth->soc->offload_version) {
-@@ -4702,6 +4739,8 @@ err_deinit_hw:
- 	mtk_hw_deinit(eth);
- err_wed_exit:
- 	mtk_wed_exit();
-+err_destroy_sgmii:
-+	mtk_sgmii_destroy(eth);
- 
- 	return err;
- }
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -510,65 +510,6 @@
- #define ETHSYS_DMA_AG_MAP_QDMA	BIT(1)
- #define ETHSYS_DMA_AG_MAP_PPE	BIT(2)
- 
--/* SGMII subsystem config registers */
--/* BMCR (low 16) BMSR (high 16) */
--#define SGMSYS_PCS_CONTROL_1	0x0
--#define SGMII_BMCR		GENMASK(15, 0)
--#define SGMII_BMSR		GENMASK(31, 16)
--#define SGMII_AN_RESTART	BIT(9)
--#define SGMII_ISOLATE		BIT(10)
--#define SGMII_AN_ENABLE		BIT(12)
--#define SGMII_LINK_STATYS	BIT(18)
--#define SGMII_AN_ABILITY	BIT(19)
--#define SGMII_AN_COMPLETE	BIT(21)
--#define SGMII_PCS_FAULT		BIT(23)
--#define SGMII_AN_EXPANSION_CLR	BIT(30)
--
--#define SGMSYS_PCS_ADVERTISE	0x8
--#define SGMII_ADVERTISE		GENMASK(15, 0)
--#define SGMII_LPA		GENMASK(31, 16)
--
--/* Register to programmable link timer, the unit in 2 * 8ns */
--#define SGMSYS_PCS_LINK_TIMER	0x18
--#define SGMII_LINK_TIMER_MASK	GENMASK(19, 0)
--#define SGMII_LINK_TIMER_DEFAULT	(0x186a0 & SGMII_LINK_TIMER_MASK)
--
--/* Register to control remote fault */
--#define SGMSYS_SGMII_MODE		0x20
--#define SGMII_IF_MODE_SGMII		BIT(0)
--#define SGMII_SPEED_DUPLEX_AN		BIT(1)
--#define SGMII_SPEED_MASK		GENMASK(3, 2)
--#define SGMII_SPEED_10			FIELD_PREP(SGMII_SPEED_MASK, 0)
--#define SGMII_SPEED_100			FIELD_PREP(SGMII_SPEED_MASK, 1)
--#define SGMII_SPEED_1000		FIELD_PREP(SGMII_SPEED_MASK, 2)
--#define SGMII_DUPLEX_HALF		BIT(4)
--#define SGMII_IF_MODE_BIT5		BIT(5)
--#define SGMII_REMOTE_FAULT_DIS		BIT(8)
--#define SGMII_CODE_SYNC_SET_VAL		BIT(9)
--#define SGMII_CODE_SYNC_SET_EN		BIT(10)
--#define SGMII_SEND_AN_ERROR_EN		BIT(11)
--#define SGMII_IF_MODE_MASK		GENMASK(5, 1)
--
--/* Register to reset SGMII design */
--#define SGMII_RESERVED_0	0x34
--#define SGMII_SW_RESET		BIT(0)
--
--/* Register to set SGMII speed, ANA RG_ Control Signals III*/
--#define SGMSYS_ANA_RG_CS3	0x2028
--#define RG_PHY_SPEED_MASK	(BIT(2) | BIT(3))
--#define RG_PHY_SPEED_1_25G	0x0
--#define RG_PHY_SPEED_3_125G	BIT(2)
--
--/* Register to power up QPHY */
--#define SGMSYS_QPHY_PWR_STATE_CTRL 0xe8
--#define	SGMII_PHYA_PWD		BIT(4)
--
--/* Register to QPHY wrapper control */
--#define SGMSYS_QPHY_WRAP_CTRL	0xec
--#define SGMII_PN_SWAP_MASK	GENMASK(1, 0)
--#define SGMII_PN_SWAP_TX_RX	(BIT(0) | BIT(1))
--#define MTK_SGMII_FLAG_PN_SWAP	BIT(0)
--
- /* Infrasys subsystem config registers */
- #define INFRA_MISC2            0x70c
- #define CO_QPHY_SEL            BIT(0)
-@@ -1102,31 +1043,6 @@ struct mtk_soc_data {
- /* currently no SoC has more than 2 macs */
- #define MTK_MAX_DEVS			2
- 
--/* struct mtk_pcs -    This structure holds each sgmii regmap and associated
-- *                     data
-- * @regmap:            The register map pointing at the range used to setup
-- *                     SGMII modes
-- * @ana_rgc3:          The offset refers to register ANA_RGC3 related to regmap
-- * @interface:         Currently configured interface mode
-- * @pcs:               Phylink PCS structure
-- * @flags:             Flags indicating hardware properties
-- */
--struct mtk_pcs {
--	struct regmap	*regmap;
--	u32             ana_rgc3;
--	phy_interface_t	interface;
--	struct phylink_pcs pcs;
--	u32		flags;
--};
--
--/* struct mtk_sgmii -  This is the structure holding sgmii regmap and its
-- *                     characteristics
-- * @pcs                Array of individual PCS structures
-- */
--struct mtk_sgmii {
--	struct mtk_pcs	pcs[MTK_MAX_DEVS];
--};
--
- /* struct mtk_eth -	This is the main datasructure for holding the state
-  *			of the driver
-  * @dev:		The device pointer
-@@ -1146,6 +1062,7 @@ struct mtk_sgmii {
-  *			MII modes
-  * @infra:              The register map pointing at the range used to setup
-  *                      SGMII and GePHY path
-+ * @sgmii_pcs:		Pointers to mtk-pcs-lynxi phylink_pcs instances
-  * @pctl:		The register map pointing at the range used to setup
-  *			GMAC port drive/slew values
-  * @dma_refcnt:		track how many netdevs are using the DMA engine
-@@ -1186,8 +1103,8 @@ struct mtk_eth {
- 	u32				msg_enable;
- 	unsigned long			sysclk;
- 	struct regmap			*ethsys;
--	struct regmap                   *infra;
--	struct mtk_sgmii                *sgmii;
-+	struct regmap			*infra;
-+	struct phylink_pcs		*sgmii_pcs[MTK_MAX_DEVS];
- 	struct regmap			*pctl;
- 	bool				hwlro;
- 	refcount_t			dma_refcnt;
-@@ -1349,10 +1266,6 @@ void mtk_stats_update_mac(struct mtk_mac
- void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg);
- u32 mtk_r32(struct mtk_eth *eth, unsigned reg);
- 
--struct phylink_pcs *mtk_sgmii_select_pcs(struct mtk_sgmii *ss, int id);
--int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *np,
--		   u32 ana_rgc3);
--
- int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id);
- int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id);
- int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id);
---- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
-+++ /dev/null
-@@ -1,217 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0
--// Copyright (c) 2018-2019 MediaTek Inc.
--
--/* A library for MediaTek SGMII circuit
-- *
-- * Author: Sean Wang <sean.wang@mediatek.com>
-- *
-- */
--
--#include <linux/mfd/syscon.h>
--#include <linux/of.h>
--#include <linux/phylink.h>
--#include <linux/regmap.h>
--
--#include "mtk_eth_soc.h"
--
--static struct mtk_pcs *pcs_to_mtk_pcs(struct phylink_pcs *pcs)
--{
--	return container_of(pcs, struct mtk_pcs, pcs);
--}
--
--static void mtk_pcs_get_state(struct phylink_pcs *pcs,
--			      struct phylink_link_state *state)
--{
--	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
--	unsigned int bm, adv;
--
--	/* Read the BMSR and LPA */
--	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &bm);
--	regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv);
--
--	phylink_mii_c22_pcs_decode_state(state, FIELD_GET(SGMII_BMSR, bm),
--					 FIELD_GET(SGMII_LPA, adv));
--}
--
--static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
--			  phy_interface_t interface,
--			  const unsigned long *advertising,
--			  bool permit_pause_to_mac)
--{
--	bool mode_changed = false, changed, use_an;
--	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
--	unsigned int rgc3, sgm_mode, bmcr;
--	int advertise, link_timer;
--
--	advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
--							     advertising);
--	if (advertise < 0)
--		return advertise;
--
--	/* Clearing IF_MODE_BIT0 switches the PCS to BASE-X mode, and
--	 * we assume that fixes it's speed at bitrate = line rate (in
--	 * other words, 1000Mbps or 2500Mbps).
--	 */
--	if (interface == PHY_INTERFACE_MODE_SGMII) {
--		sgm_mode = SGMII_IF_MODE_SGMII;
--		if (phylink_autoneg_inband(mode)) {
--			sgm_mode |= SGMII_REMOTE_FAULT_DIS |
--				    SGMII_SPEED_DUPLEX_AN;
--			use_an = true;
--		} else {
--			use_an = false;
--		}
--	} else if (phylink_autoneg_inband(mode)) {
--		/* 1000base-X or 2500base-X autoneg */
--		sgm_mode = SGMII_REMOTE_FAULT_DIS;
--		use_an = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
--					   advertising);
--	} else {
--		/* 1000base-X or 2500base-X without autoneg */
--		sgm_mode = 0;
--		use_an = false;
--	}
--
--	if (use_an) {
--		bmcr = SGMII_AN_ENABLE;
--	} else {
--		bmcr = 0;
--	}
--
--	if (mpcs->interface != interface) {
--		link_timer = phylink_get_link_timer_ns(interface);
--		if (link_timer < 0)
--			return link_timer;
--
--		/* PHYA power down */
--		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
--				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
--
--		if (mpcs->flags & MTK_SGMII_FLAG_PN_SWAP)
--			regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_WRAP_CTRL,
--					   SGMII_PN_SWAP_MASK,
--					   SGMII_PN_SWAP_TX_RX);
--
--		/* Reset SGMII PCS state */
--		regmap_update_bits(mpcs->regmap, SGMII_RESERVED_0,
--				   SGMII_SW_RESET, SGMII_SW_RESET);
--
--		if (interface == PHY_INTERFACE_MODE_2500BASEX)
--			rgc3 = RG_PHY_SPEED_3_125G;
--		else
--			rgc3 = 0;
--
--		/* Configure the underlying interface speed */
--		regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
--				   RG_PHY_SPEED_3_125G, rgc3);
--
--		/* Setup the link timer */
--		regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, link_timer / 2 / 8);
--
--		mpcs->interface = interface;
--		mode_changed = true;
--	}
--
--	/* Update the advertisement, noting whether it has changed */
--	regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
--				 SGMII_ADVERTISE, advertise, &changed);
--
--	/* Update the sgmsys mode register */
--	regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
--			   SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN |
--			   SGMII_IF_MODE_SGMII, sgm_mode);
--
--	/* Update the BMCR */
--	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
--			   SGMII_AN_ENABLE, bmcr);
--
--	/* Release PHYA power down state
--	 * Only removing bit SGMII_PHYA_PWD isn't enough.
--	 * There are cases when the SGMII_PHYA_PWD register contains 0x9 which
--	 * prevents SGMII from working. The SGMII still shows link but no traffic
--	 * can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
--	 * taken from a good working state of the SGMII interface.
--	 * Unknown how much the QPHY needs but it is racy without a sleep.
--	 * Tested on mt7622 & mt7986.
--	 */
--	usleep_range(50, 100);
--	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
--
--	return changed || mode_changed;
--}
--
--static void mtk_pcs_restart_an(struct phylink_pcs *pcs)
--{
--	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
--
--	regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
--			   SGMII_AN_RESTART, SGMII_AN_RESTART);
--}
--
--static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
--			    phy_interface_t interface, int speed, int duplex)
--{
--	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
--	unsigned int sgm_mode;
--
--	if (!phylink_autoneg_inband(mode)) {
--		/* Force the speed and duplex setting */
--		if (speed == SPEED_10)
--			sgm_mode = SGMII_SPEED_10;
--		else if (speed == SPEED_100)
--			sgm_mode = SGMII_SPEED_100;
--		else
--			sgm_mode = SGMII_SPEED_1000;
--
--		if (duplex != DUPLEX_FULL)
--			sgm_mode |= SGMII_DUPLEX_HALF;
--
--		regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
--				   SGMII_DUPLEX_HALF | SGMII_SPEED_MASK,
--				   sgm_mode);
--	}
--}
--
--static const struct phylink_pcs_ops mtk_pcs_ops = {
--	.pcs_get_state = mtk_pcs_get_state,
--	.pcs_config = mtk_pcs_config,
--	.pcs_an_restart = mtk_pcs_restart_an,
--	.pcs_link_up = mtk_pcs_link_up,
--};
--
--int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3)
--{
--	struct device_node *np;
--	int i;
--
--	for (i = 0; i < MTK_MAX_DEVS; i++) {
--		np = of_parse_phandle(r, "mediatek,sgmiisys", i);
--		if (!np)
--			break;
--
--		ss->pcs[i].ana_rgc3 = ana_rgc3;
--		ss->pcs[i].regmap = syscon_node_to_regmap(np);
--
--		ss->pcs[i].flags = 0;
--		if (of_property_read_bool(np, "mediatek,pnswap"))
--			ss->pcs[i].flags |= MTK_SGMII_FLAG_PN_SWAP;
--
--		of_node_put(np);
--		if (IS_ERR(ss->pcs[i].regmap))
--			return PTR_ERR(ss->pcs[i].regmap);
--
--		ss->pcs[i].pcs.ops = &mtk_pcs_ops;
--		ss->pcs[i].pcs.poll = true;
--		ss->pcs[i].interface = PHY_INTERFACE_MODE_NA;
--	}
--
--	return 0;
--}
--
--struct phylink_pcs *mtk_sgmii_select_pcs(struct mtk_sgmii *ss, int id)
--{
--	if (!ss->pcs[id].regmap)
--		return NULL;
--
--	return &ss->pcs[id].pcs;
--}
diff --git a/target/linux/generic/backport-6.1/733-v6.4-21-net-mtk_eth_soc-use-WO-firmware-for-MT7981.patch b/target/linux/generic/backport-6.1/733-v6.4-21-net-mtk_eth_soc-use-WO-firmware-for-MT7981.patch
deleted file mode 100644
index 9ce2735951c8..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.4-21-net-mtk_eth_soc-use-WO-firmware-for-MT7981.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From f5af7931d2a2cae66d0f9dad4ba517b1b00620b3 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 19 Apr 2023 19:07:23 +0100
-Subject: [PATCH] net: mtk_eth_soc: use WO firmware for MT7981
-
-In order to support wireless offloading on MT7981 we need to load the
-appropriate firmware. Recognize MT7981 and load mt7981_wo.bin.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/ethernet/mediatek/mtk_wed_mcu.c | 7 ++++++-
- drivers/net/ethernet/mediatek/mtk_wed_wo.h  | 1 +
- 2 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -326,7 +326,11 @@ mtk_wed_mcu_load_firmware(struct mtk_wed
- 		wo->hw->index + 1);
- 
- 	/* load firmware */
--	fw_name = wo->hw->index ? MT7986_FIRMWARE_WO1 : MT7986_FIRMWARE_WO0;
-+	if (of_device_is_compatible(wo->hw->node, "mediatek,mt7981-wed"))
-+		fw_name = MT7981_FIRMWARE_WO;
-+	else
-+		fw_name = wo->hw->index ? MT7986_FIRMWARE_WO1 : MT7986_FIRMWARE_WO0;
-+
- 	ret = request_firmware(&fw, fw_name, wo->hw->dev);
- 	if (ret)
- 		return ret;
-@@ -386,5 +390,6 @@ int mtk_wed_mcu_init(struct mtk_wed_wo *
- 				  100, MTK_FW_DL_TIMEOUT);
- }
- 
-+MODULE_FIRMWARE(MT7981_FIRMWARE_WO);
- MODULE_FIRMWARE(MT7986_FIRMWARE_WO0);
- MODULE_FIRMWARE(MT7986_FIRMWARE_WO1);
---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-@@ -88,6 +88,7 @@ enum mtk_wed_dummy_cr_idx {
- 	MTK_WED_DUMMY_CR_WO_STATUS,
- };
- 
-+#define MT7981_FIRMWARE_WO	"mediatek/mt7981_wo.bin"
- #define MT7986_FIRMWARE_WO0	"mediatek/mt7986_wo_0.bin"
- #define MT7986_FIRMWARE_WO1	"mediatek/mt7986_wo_1.bin"
- 
diff --git a/target/linux/generic/backport-6.1/733-v6.4-22-net-ethernet-mtk_eth_soc-fix-NULL-pointer-dereferenc.patch b/target/linux/generic/backport-6.1/733-v6.4-22-net-ethernet-mtk_eth_soc-fix-NULL-pointer-dereferenc.patch
deleted file mode 100644
index d715c4aa6867..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.4-22-net-ethernet-mtk_eth_soc-fix-NULL-pointer-dereferenc.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 7c83e28f10830aa5105c25eaabe890e3adac36aa Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 9 May 2023 03:20:06 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix NULL pointer dereference
-
-Check for NULL pointer to avoid kernel crashing in case of missing WO
-firmware in case only a single WEDv2 device has been initialized, e.g. on
-MT7981 which can connect just one wireless frontend.
-
-Fixes: 86ce0d09e424 ("net: ethernet: mtk_eth_soc: use WO firmware for MT7981")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_wed.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -647,7 +647,7 @@ __mtk_wed_detach(struct mtk_wed_device *
- 					   BIT(hw->index), BIT(hw->index));
- 	}
- 
--	if (!hw_list[!hw->index]->wed_dev &&
-+	if ((!hw_list[!hw->index] || !hw_list[!hw->index]->wed_dev) &&
- 	    hw->eth->dma_dev != hw->eth->dev)
- 		mtk_eth_set_dma_device(hw->eth, hw->eth->dev);
- 
diff --git a/target/linux/generic/backport-6.1/733-v6.4-23-net-ethernet-mtk_eth_soc-ppe-add-support-for-flow-ac.patch b/target/linux/generic/backport-6.1/733-v6.4-23-net-ethernet-mtk_eth_soc-ppe-add-support-for-flow-ac.patch
deleted file mode 100644
index 5c3de5759186..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.4-23-net-ethernet-mtk_eth_soc-ppe-add-support-for-flow-ac.patch
+++ /dev/null
@@ -1,403 +0,0 @@
-From f601293f37c4be618c5efaef85d2ee21f97e82e0 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:57:35 +0000
-Subject: [PATCH 092/250] net: ethernet: mtk_eth_soc: ppe: add support for flow
- accounting
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The PPE units found in MT7622 and newer support packet and byte
-accounting of hw-offloaded flows. Add support for reading those counters
-as found in MediaTek's SDK[1].
-
-[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/bc6a6a375c800dc2b80e1a325a2c732d1737df92
-Tested-by: Bjørn Mork <bjorn@mork.no>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c   |   8 +-
- drivers/net/ethernet/mediatek/mtk_eth_soc.h   |   3 +
- drivers/net/ethernet/mediatek/mtk_ppe.c       | 114 +++++++++++++++++-
- drivers/net/ethernet/mediatek/mtk_ppe.h       |  25 +++-
- .../net/ethernet/mediatek/mtk_ppe_debugfs.c   |   9 +-
- .../net/ethernet/mediatek/mtk_ppe_offload.c   |   8 ++
- drivers/net/ethernet/mediatek/mtk_ppe_regs.h  |  14 +++
- 7 files changed, 172 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4690,8 +4690,8 @@ static int mtk_probe(struct platform_dev
- 		for (i = 0; i < num_ppe; i++) {
- 			u32 ppe_addr = eth->soc->reg_map->ppe_base + i * 0x400;
- 
--			eth->ppe[i] = mtk_ppe_init(eth, eth->base + ppe_addr,
--						   eth->soc->offload_version, i);
-+			eth->ppe[i] = mtk_ppe_init(eth, eth->base + ppe_addr, i);
-+
- 			if (!eth->ppe[i]) {
- 				err = -ENOMEM;
- 				goto err_deinit_ppe;
-@@ -4815,6 +4815,7 @@ static const struct mtk_soc_data mt7622_
- 	.required_pctl = false,
- 	.offload_version = 2,
- 	.hash_offset = 2,
-+	.has_accounting = true,
- 	.foe_entry_size = sizeof(struct mtk_foe_entry) - 16,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma),
-@@ -4852,6 +4853,7 @@ static const struct mtk_soc_data mt7629_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7629_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.has_accounting = true,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma),
- 		.rxd_size = sizeof(struct mtk_rx_dma),
-@@ -4872,6 +4874,7 @@ static const struct mtk_soc_data mt7981_
- 	.offload_version = 2,
- 	.hash_offset = 4,
- 	.foe_entry_size = sizeof(struct mtk_foe_entry),
-+	.has_accounting = true,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma_v2),
- 		.rxd_size = sizeof(struct mtk_rx_dma_v2),
-@@ -4892,6 +4895,7 @@ static const struct mtk_soc_data mt7986_
- 	.offload_version = 2,
- 	.hash_offset = 4,
- 	.foe_entry_size = sizeof(struct mtk_foe_entry),
-+	.has_accounting = true,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma_v2),
- 		.rxd_size = sizeof(struct mtk_rx_dma_v2),
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1011,6 +1011,8 @@ struct mtk_reg_map {
-  *				the extra setup for those pins used by GMAC.
-  * @hash_offset			Flow table hash offset.
-  * @foe_entry_size		Foe table entry size.
-+ * @has_accounting		Bool indicating support for accounting of
-+ *				offloaded flows.
-  * @txd_size			Tx DMA descriptor size.
-  * @rxd_size			Rx DMA descriptor size.
-  * @rx_irq_done_mask		Rx irq done register mask.
-@@ -1028,6 +1030,7 @@ struct mtk_soc_data {
- 	u8		hash_offset;
- 	u16		foe_entry_size;
- 	netdev_features_t hw_features;
-+	bool		has_accounting;
- 	struct {
- 		u32	txd_size;
- 		u32	rxd_size;
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -74,6 +74,48 @@ static int mtk_ppe_wait_busy(struct mtk_
- 	return ret;
- }
- 
-+static int mtk_ppe_mib_wait_busy(struct mtk_ppe *ppe)
-+{
-+	int ret;
-+	u32 val;
-+
-+	ret = readl_poll_timeout(ppe->base + MTK_PPE_MIB_SER_CR, val,
-+				 !(val & MTK_PPE_MIB_SER_CR_ST),
-+				 20, MTK_PPE_WAIT_TIMEOUT_US);
-+
-+	if (ret)
-+		dev_err(ppe->dev, "MIB table busy");
-+
-+	return ret;
-+}
-+
-+static int mtk_mib_entry_read(struct mtk_ppe *ppe, u16 index, u64 *bytes, u64 *packets)
-+{
-+	u32 byte_cnt_low, byte_cnt_high, pkt_cnt_low, pkt_cnt_high;
-+	u32 val, cnt_r0, cnt_r1, cnt_r2;
-+	int ret;
-+
-+	val = FIELD_PREP(MTK_PPE_MIB_SER_CR_ADDR, index) | MTK_PPE_MIB_SER_CR_ST;
-+	ppe_w32(ppe, MTK_PPE_MIB_SER_CR, val);
-+
-+	ret = mtk_ppe_mib_wait_busy(ppe);
-+	if (ret)
-+		return ret;
-+
-+	cnt_r0 = readl(ppe->base + MTK_PPE_MIB_SER_R0);
-+	cnt_r1 = readl(ppe->base + MTK_PPE_MIB_SER_R1);
-+	cnt_r2 = readl(ppe->base + MTK_PPE_MIB_SER_R2);
-+
-+	byte_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R0_BYTE_CNT_LOW, cnt_r0);
-+	byte_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R1_BYTE_CNT_HIGH, cnt_r1);
-+	pkt_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R1_PKT_CNT_LOW, cnt_r1);
-+	pkt_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R2_PKT_CNT_HIGH, cnt_r2);
-+	*bytes = ((u64)byte_cnt_high << 32) | byte_cnt_low;
-+	*packets = (pkt_cnt_high << 16) | pkt_cnt_low;
-+
-+	return 0;
-+}
-+
- static void mtk_ppe_cache_clear(struct mtk_ppe *ppe)
- {
- 	ppe_set(ppe, MTK_PPE_CACHE_CTL, MTK_PPE_CACHE_CTL_CLEAR);
-@@ -459,6 +501,13 @@ __mtk_foe_entry_clear(struct mtk_ppe *pp
- 		hwe->ib1 |= FIELD_PREP(MTK_FOE_IB1_STATE, MTK_FOE_STATE_INVALID);
- 		dma_wmb();
- 		mtk_ppe_cache_clear(ppe);
-+		if (ppe->accounting) {
-+			struct mtk_foe_accounting *acct;
-+
-+			acct = ppe->acct_table + entry->hash * sizeof(*acct);
-+			acct->packets = 0;
-+			acct->bytes = 0;
-+		}
- 	}
- 	entry->hash = 0xffff;
- 
-@@ -566,6 +615,9 @@ __mtk_foe_entry_commit(struct mtk_ppe *p
- 	wmb();
- 	hwe->ib1 = entry->ib1;
- 
-+	if (ppe->accounting)
-+		*mtk_foe_entry_ib2(eth, hwe) |= MTK_FOE_IB2_MIB_CNT;
-+
- 	dma_wmb();
- 
- 	mtk_ppe_cache_clear(ppe);
-@@ -757,11 +809,39 @@ int mtk_ppe_prepare_reset(struct mtk_ppe
- 	return mtk_ppe_wait_busy(ppe);
- }
- 
--struct mtk_ppe *mtk_ppe_init(struct mtk_eth *eth, void __iomem *base,
--			     int version, int index)
-+struct mtk_foe_accounting *mtk_foe_entry_get_mib(struct mtk_ppe *ppe, u32 index,
-+						 struct mtk_foe_accounting *diff)
-+{
-+	struct mtk_foe_accounting *acct;
-+	int size = sizeof(struct mtk_foe_accounting);
-+	u64 bytes, packets;
-+
-+	if (!ppe->accounting)
-+		return NULL;
-+
-+	if (mtk_mib_entry_read(ppe, index, &bytes, &packets))
-+		return NULL;
-+
-+	acct = ppe->acct_table + index * size;
-+
-+	acct->bytes += bytes;
-+	acct->packets += packets;
-+
-+	if (diff) {
-+		diff->bytes = bytes;
-+		diff->packets = packets;
-+	}
-+
-+	return acct;
-+}
-+
-+struct mtk_ppe *mtk_ppe_init(struct mtk_eth *eth, void __iomem *base, int index)
- {
-+	bool accounting = eth->soc->has_accounting;
- 	const struct mtk_soc_data *soc = eth->soc;
-+	struct mtk_foe_accounting *acct;
- 	struct device *dev = eth->dev;
-+	struct mtk_mib_entry *mib;
- 	struct mtk_ppe *ppe;
- 	u32 foe_flow_size;
- 	void *foe;
-@@ -778,7 +858,8 @@ struct mtk_ppe *mtk_ppe_init(struct mtk_
- 	ppe->base = base;
- 	ppe->eth = eth;
- 	ppe->dev = dev;
--	ppe->version = version;
-+	ppe->version = eth->soc->offload_version;
-+	ppe->accounting = accounting;
- 
- 	foe = dmam_alloc_coherent(ppe->dev,
- 				  MTK_PPE_ENTRIES * soc->foe_entry_size,
-@@ -794,6 +875,23 @@ struct mtk_ppe *mtk_ppe_init(struct mtk_
- 	if (!ppe->foe_flow)
- 		goto err_free_l2_flows;
- 
-+	if (accounting) {
-+		mib = dmam_alloc_coherent(ppe->dev, MTK_PPE_ENTRIES * sizeof(*mib),
-+					  &ppe->mib_phys, GFP_KERNEL);
-+		if (!mib)
-+			return NULL;
-+
-+		ppe->mib_table = mib;
-+
-+		acct = devm_kzalloc(dev, MTK_PPE_ENTRIES * sizeof(*acct),
-+				    GFP_KERNEL);
-+
-+		if (!acct)
-+			return NULL;
-+
-+		ppe->acct_table = acct;
-+	}
-+
- 	mtk_ppe_debugfs_init(ppe, index);
- 
- 	return ppe;
-@@ -923,6 +1021,16 @@ void mtk_ppe_start(struct mtk_ppe *ppe)
- 		ppe_w32(ppe, MTK_PPE_DEFAULT_CPU_PORT1, 0xcb777);
- 		ppe_w32(ppe, MTK_PPE_SBW_CTRL, 0x7f);
- 	}
-+
-+	if (ppe->accounting && ppe->mib_phys) {
-+		ppe_w32(ppe, MTK_PPE_MIB_TB_BASE, ppe->mib_phys);
-+		ppe_m32(ppe, MTK_PPE_MIB_CFG, MTK_PPE_MIB_CFG_EN,
-+			MTK_PPE_MIB_CFG_EN);
-+		ppe_m32(ppe, MTK_PPE_MIB_CFG, MTK_PPE_MIB_CFG_RD_CLR,
-+			MTK_PPE_MIB_CFG_RD_CLR);
-+		ppe_m32(ppe, MTK_PPE_MIB_CACHE_CTL, MTK_PPE_MIB_CACHE_CTL_EN,
-+			MTK_PPE_MIB_CFG_RD_CLR);
-+	}
- }
- 
- int mtk_ppe_stop(struct mtk_ppe *ppe)
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -57,6 +57,7 @@ enum {
- #define MTK_FOE_IB2_MULTICAST		BIT(8)
- 
- #define MTK_FOE_IB2_WDMA_QID2		GENMASK(13, 12)
-+#define MTK_FOE_IB2_MIB_CNT		BIT(15)
- #define MTK_FOE_IB2_WDMA_DEVIDX		BIT(16)
- #define MTK_FOE_IB2_WDMA_WINFO		BIT(17)
- 
-@@ -285,16 +286,34 @@ struct mtk_flow_entry {
- 	unsigned long cookie;
- };
- 
-+struct mtk_mib_entry {
-+	u32	byt_cnt_l;
-+	u16	byt_cnt_h;
-+	u32	pkt_cnt_l;
-+	u8	pkt_cnt_h;
-+	u8	_rsv0;
-+	u32	_rsv1;
-+} __packed;
-+
-+struct mtk_foe_accounting {
-+	u64	bytes;
-+	u64	packets;
-+};
-+
- struct mtk_ppe {
- 	struct mtk_eth *eth;
- 	struct device *dev;
- 	void __iomem *base;
- 	int version;
- 	char dirname[5];
-+	bool accounting;
- 
- 	void *foe_table;
- 	dma_addr_t foe_phys;
- 
-+	struct mtk_mib_entry *mib_table;
-+	dma_addr_t mib_phys;
-+
- 	u16 foe_check_time[MTK_PPE_ENTRIES];
- 	struct hlist_head *foe_flow;
- 
-@@ -303,8 +322,8 @@ struct mtk_ppe {
- 	void *acct_table;
- };
- 
--struct mtk_ppe *mtk_ppe_init(struct mtk_eth *eth, void __iomem *base,
--			     int version, int index);
-+struct mtk_ppe *mtk_ppe_init(struct mtk_eth *eth, void __iomem *base, int index);
-+
- void mtk_ppe_deinit(struct mtk_eth *eth);
- void mtk_ppe_start(struct mtk_ppe *ppe);
- int mtk_ppe_stop(struct mtk_ppe *ppe);
-@@ -359,5 +378,7 @@ int mtk_foe_entry_commit(struct mtk_ppe
- void mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
- int mtk_foe_entry_idle_time(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
- int mtk_ppe_debugfs_init(struct mtk_ppe *ppe, int index);
-+struct mtk_foe_accounting *mtk_foe_entry_get_mib(struct mtk_ppe *ppe, u32 index,
-+						 struct mtk_foe_accounting *diff);
- 
- #endif
---- a/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-@@ -82,6 +82,7 @@ mtk_ppe_debugfs_foe_show(struct seq_file
- 		struct mtk_foe_entry *entry = mtk_foe_get_entry(ppe, i);
- 		struct mtk_foe_mac_info *l2;
- 		struct mtk_flow_addr_info ai = {};
-+		struct mtk_foe_accounting *acct;
- 		unsigned char h_source[ETH_ALEN];
- 		unsigned char h_dest[ETH_ALEN];
- 		int type, state;
-@@ -95,6 +96,8 @@ mtk_ppe_debugfs_foe_show(struct seq_file
- 		if (bind && state != MTK_FOE_STATE_BIND)
- 			continue;
- 
-+		acct = mtk_foe_entry_get_mib(ppe, i, NULL);
-+
- 		type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
- 		seq_printf(m, "%05x %s %7s", i,
- 			   mtk_foe_entry_state_str(state),
-@@ -153,9 +156,11 @@ mtk_ppe_debugfs_foe_show(struct seq_file
- 		*((__be16 *)&h_dest[4]) = htons(l2->dest_mac_lo);
- 
- 		seq_printf(m, " eth=%pM->%pM etype=%04x"
--			      " vlan=%d,%d ib1=%08x ib2=%08x\n",
-+			      " vlan=%d,%d ib1=%08x ib2=%08x"
-+			      " packets=%llu bytes=%llu\n",
- 			   h_source, h_dest, ntohs(l2->etype),
--			   l2->vlan1, l2->vlan2, entry->ib1, ib2);
-+			   l2->vlan1, l2->vlan2, entry->ib1, ib2,
-+			   acct ? acct->packets : 0, acct ? acct->bytes : 0);
- 	}
- 
- 	return 0;
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -497,6 +497,7 @@ static int
- mtk_flow_offload_stats(struct mtk_eth *eth, struct flow_cls_offload *f)
- {
- 	struct mtk_flow_entry *entry;
-+	struct mtk_foe_accounting diff;
- 	u32 idle;
- 
- 	entry = rhashtable_lookup(&eth->flow_table, &f->cookie,
-@@ -507,6 +508,13 @@ mtk_flow_offload_stats(struct mtk_eth *e
- 	idle = mtk_foe_entry_idle_time(eth->ppe[entry->ppe_index], entry);
- 	f->stats.lastused = jiffies - idle * HZ;
- 
-+	if (entry->hash != 0xFFFF &&
-+	    mtk_foe_entry_get_mib(eth->ppe[entry->ppe_index], entry->hash,
-+				  &diff)) {
-+		f->stats.pkts += diff.packets;
-+		f->stats.bytes += diff.bytes;
-+	}
-+
- 	return 0;
- }
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-@@ -149,6 +149,20 @@ enum {
- 
- #define MTK_PPE_MIB_TB_BASE			0x338
- 
-+#define MTK_PPE_MIB_SER_CR			0x33C
-+#define MTK_PPE_MIB_SER_CR_ST			BIT(16)
-+#define MTK_PPE_MIB_SER_CR_ADDR			GENMASK(13, 0)
-+
-+#define MTK_PPE_MIB_SER_R0			0x340
-+#define MTK_PPE_MIB_SER_R0_BYTE_CNT_LOW		GENMASK(31, 0)
-+
-+#define MTK_PPE_MIB_SER_R1			0x344
-+#define MTK_PPE_MIB_SER_R1_PKT_CNT_LOW		GENMASK(31, 16)
-+#define MTK_PPE_MIB_SER_R1_BYTE_CNT_HIGH	GENMASK(15, 0)
-+
-+#define MTK_PPE_MIB_SER_R2			0x348
-+#define MTK_PPE_MIB_SER_R2_PKT_CNT_HIGH		GENMASK(23, 0)
-+
- #define MTK_PPE_MIB_CACHE_CTL			0x350
- #define MTK_PPE_MIB_CACHE_CTL_EN		BIT(0)
- #define MTK_PPE_MIB_CACHE_CTL_FLUSH		BIT(2)
diff --git a/target/linux/generic/backport-6.1/733-v6.4-24-net-ethernet-mediatek-fix-ppe-flow-accounting-for-v1.patch b/target/linux/generic/backport-6.1/733-v6.4-24-net-ethernet-mediatek-fix-ppe-flow-accounting-for-v1.patch
deleted file mode 100644
index 64352426ae54..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.4-24-net-ethernet-mediatek-fix-ppe-flow-accounting-for-v1.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 88a0fd5927b7c2c7aecd6dc747d898eb38043d2b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 20 Apr 2023 22:06:42 +0100
-Subject: [PATCH 093/250] net: mtk_eth_soc: mediatek: fix ppe flow accounting
- for v1 hardware
-
-Older chips (like MT7622) use a different bit in ib2 to enable hardware
-counter support. Add macros for both and select the appropriate bit.
-
-Fixes: 3fbe4d8c0e53 ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_ppe.c | 10 ++++++++--
- drivers/net/ethernet/mediatek/mtk_ppe.h |  3 ++-
- 2 files changed, 10 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -599,6 +599,7 @@ __mtk_foe_entry_commit(struct mtk_ppe *p
- 	struct mtk_eth *eth = ppe->eth;
- 	u16 timestamp = mtk_eth_timestamp(eth);
- 	struct mtk_foe_entry *hwe;
-+	u32 val;
- 
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
- 		entry->ib1 &= ~MTK_FOE_IB1_BIND_TIMESTAMP_V2;
-@@ -615,8 +616,13 @@ __mtk_foe_entry_commit(struct mtk_ppe *p
- 	wmb();
- 	hwe->ib1 = entry->ib1;
- 
--	if (ppe->accounting)
--		*mtk_foe_entry_ib2(eth, hwe) |= MTK_FOE_IB2_MIB_CNT;
-+	if (ppe->accounting) {
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+			val = MTK_FOE_IB2_MIB_CNT_V2;
-+		else
-+			val = MTK_FOE_IB2_MIB_CNT;
-+		*mtk_foe_entry_ib2(eth, hwe) |= val;
-+	}
- 
- 	dma_wmb();
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -55,9 +55,10 @@ enum {
- #define MTK_FOE_IB2_PSE_QOS		BIT(4)
- #define MTK_FOE_IB2_DEST_PORT		GENMASK(7, 5)
- #define MTK_FOE_IB2_MULTICAST		BIT(8)
-+#define MTK_FOE_IB2_MIB_CNT		BIT(10)
- 
- #define MTK_FOE_IB2_WDMA_QID2		GENMASK(13, 12)
--#define MTK_FOE_IB2_MIB_CNT		BIT(15)
-+#define MTK_FOE_IB2_MIB_CNT_V2		BIT(15)
- #define MTK_FOE_IB2_WDMA_DEVIDX		BIT(16)
- #define MTK_FOE_IB2_WDMA_WINFO		BIT(17)
- 
diff --git a/target/linux/generic/backport-6.1/733-v6.4-25-net-ethernet-mtk_eth_soc-drop-generic-vlan-rx-offloa.patch b/target/linux/generic/backport-6.1/733-v6.4-25-net-ethernet-mtk_eth_soc-drop-generic-vlan-rx-offloa.patch
deleted file mode 100644
index 7e3d5a330839..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.4-25-net-ethernet-mtk_eth_soc-drop-generic-vlan-rx-offloa.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 20 Nov 2022 23:01:00 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: drop generic vlan rx offload,
- only use DSA untagging
-
-Through testing I found out that hardware vlan rx offload support seems to
-have some hardware issues. At least when using multiple MACs and when receiving
-tagged packets on the secondary MAC, the hardware can sometimes start to emit
-wrong tags on the first MAC as well.
-
-In order to avoid such issues, drop the feature configuration and use the
-offload feature only for DSA hardware untagging on MT7621/MT7622 devices which
-only use one MAC.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1896,9 +1896,7 @@ static int mtk_poll_rx(struct napi_struc
- 
- 	while (done < budget) {
- 		unsigned int pktlen, *rxdcsum;
--		bool has_hwaccel_tag = false;
- 		struct net_device *netdev;
--		u16 vlan_proto, vlan_tci;
- 		dma_addr_t dma_addr;
- 		u32 hash, reason;
- 		int mac = 0;
-@@ -2033,36 +2031,21 @@ static int mtk_poll_rx(struct napi_struc
- 			skb_checksum_none_assert(skb);
- 		skb->protocol = eth_type_trans(skb, netdev);
- 
--		if (reason == MTK_PPE_CPU_REASON_HIT_UNBIND_RATE_REACHED)
--			mtk_ppe_check_skb(eth->ppe[0], skb, hash);
--
--		if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) {
--			if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
--				if (trxd.rxd3 & RX_DMA_VTAG_V2) {
--					vlan_proto = RX_DMA_VPID(trxd.rxd4);
--					vlan_tci = RX_DMA_VID(trxd.rxd4);
--					has_hwaccel_tag = true;
--				}
--			} else if (trxd.rxd2 & RX_DMA_VTAG) {
--				vlan_proto = RX_DMA_VPID(trxd.rxd3);
--				vlan_tci = RX_DMA_VID(trxd.rxd3);
--				has_hwaccel_tag = true;
--			}
--		}
--
- 		/* When using VLAN untagging in combination with DSA, the
- 		 * hardware treats the MTK special tag as a VLAN and untags it.
- 		 */
--		if (has_hwaccel_tag && netdev_uses_dsa(netdev)) {
--			unsigned int port = vlan_proto & GENMASK(2, 0);
-+		if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2) &&
-+		    (trxd.rxd2 & RX_DMA_VTAG) && netdev_uses_dsa(netdev)) {
-+			unsigned int port = RX_DMA_VPID(trxd.rxd3) & GENMASK(2, 0);
- 
- 			if (port < ARRAY_SIZE(eth->dsa_meta) &&
- 			    eth->dsa_meta[port])
- 				skb_dst_set_noref(skb, &eth->dsa_meta[port]->dst);
--		} else if (has_hwaccel_tag) {
--			__vlan_hwaccel_put_tag(skb, htons(vlan_proto), vlan_tci);
- 		}
- 
-+		if (reason == MTK_PPE_CPU_REASON_HIT_UNBIND_RATE_REACHED)
-+			mtk_ppe_check_skb(eth->ppe[0], skb, hash);
-+
- 		skb_record_rx_queue(skb, 0);
- 		napi_gro_receive(napi, skb);
- 
-@@ -2888,29 +2871,11 @@ static netdev_features_t mtk_fix_feature
- 
- static int mtk_set_features(struct net_device *dev, netdev_features_t features)
- {
--	struct mtk_mac *mac = netdev_priv(dev);
--	struct mtk_eth *eth = mac->hw;
- 	netdev_features_t diff = dev->features ^ features;
--	int i;
- 
- 	if ((diff & NETIF_F_LRO) && !(features & NETIF_F_LRO))
- 		mtk_hwlro_netdev_disable(dev);
- 
--	/* Set RX VLAN offloading */
--	if (!(diff & NETIF_F_HW_VLAN_CTAG_RX))
--		return 0;
--
--	mtk_w32(eth, !!(features & NETIF_F_HW_VLAN_CTAG_RX),
--		MTK_CDMP_EG_CTRL);
--
--	/* sync features with other MAC */
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
--		if (!eth->netdev[i] || eth->netdev[i] == dev)
--			continue;
--		eth->netdev[i]->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
--		eth->netdev[i]->features |= features & NETIF_F_HW_VLAN_CTAG_RX;
--	}
--
- 	return 0;
- }
- 
-@@ -3224,30 +3189,6 @@ static int mtk_open(struct net_device *d
- 	struct mtk_eth *eth = mac->hw;
- 	int i, err;
- 
--	if (mtk_uses_dsa(dev) && !eth->prog) {
--		for (i = 0; i < ARRAY_SIZE(eth->dsa_meta); i++) {
--			struct metadata_dst *md_dst = eth->dsa_meta[i];
--
--			if (md_dst)
--				continue;
--
--			md_dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX,
--						    GFP_KERNEL);
--			if (!md_dst)
--				return -ENOMEM;
--
--			md_dst->u.port_info.port_id = i;
--			eth->dsa_meta[i] = md_dst;
--		}
--	} else {
--		/* Hardware special tag parsing needs to be disabled if at least
--		 * one MAC does not use DSA.
--		 */
--		u32 val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
--		val &= ~MTK_CDMP_STAG_EN;
--		mtk_w32(eth, val, MTK_CDMP_IG_CTRL);
--	}
--
- 	err = phylink_of_phy_connect(mac->phylink, mac->of_node, 0);
- 	if (err) {
- 		netdev_err(dev, "%s: could not attach PHY: %d\n", __func__,
-@@ -3286,6 +3227,35 @@ static int mtk_open(struct net_device *d
- 	phylink_start(mac->phylink);
- 	netif_tx_start_all_queues(dev);
- 
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+		return 0;
-+
-+	if (mtk_uses_dsa(dev) && !eth->prog) {
-+		for (i = 0; i < ARRAY_SIZE(eth->dsa_meta); i++) {
-+			struct metadata_dst *md_dst = eth->dsa_meta[i];
-+
-+			if (md_dst)
-+				continue;
-+
-+			md_dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX,
-+						    GFP_KERNEL);
-+			if (!md_dst)
-+				return -ENOMEM;
-+
-+			md_dst->u.port_info.port_id = i;
-+			eth->dsa_meta[i] = md_dst;
-+		}
-+	} else {
-+		/* Hardware special tag parsing needs to be disabled if at least
-+		 * one MAC does not use DSA.
-+		 */
-+		u32 val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
-+		val &= ~MTK_CDMP_STAG_EN;
-+		mtk_w32(eth, val, MTK_CDMP_IG_CTRL);
-+
-+		mtk_w32(eth, 0, MTK_CDMP_EG_CTRL);
-+	}
-+
- 	return 0;
- }
- 
-@@ -3770,10 +3740,9 @@ static int mtk_hw_init(struct mtk_eth *e
- 	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
- 		val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
- 		mtk_w32(eth, val | MTK_CDMP_STAG_EN, MTK_CDMP_IG_CTRL);
--	}
- 
--	/* Enable RX VLan Offloading */
--	mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
-+		mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
-+	}
- 
- 	/* set interrupt delays based on current Net DIM sample */
- 	mtk_dim_rx(&eth->rx_dim.work);
-@@ -4413,7 +4382,7 @@ static int mtk_add_mac(struct mtk_eth *e
- 		eth->netdev[id]->hw_features |= NETIF_F_LRO;
- 
- 	eth->netdev[id]->vlan_features = eth->soc->hw_features &
--		~(NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX);
-+		~NETIF_F_HW_VLAN_CTAG_TX;
- 	eth->netdev[id]->features |= eth->soc->hw_features;
- 	eth->netdev[id]->ethtool_ops = &mtk_ethtool_ops;
- 
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -48,7 +48,6 @@
- #define MTK_HW_FEATURES		(NETIF_F_IP_CSUM | \
- 				 NETIF_F_RXCSUM | \
- 				 NETIF_F_HW_VLAN_CTAG_TX | \
--				 NETIF_F_HW_VLAN_CTAG_RX | \
- 				 NETIF_F_SG | NETIF_F_TSO | \
- 				 NETIF_F_TSO6 | \
- 				 NETIF_F_IPV6_CSUM |\
diff --git a/target/linux/generic/backport-6.1/733-v6.5-26-net-ethernet-mtk_eth_soc-always-mtk_get_ib1_pkt_type.patch b/target/linux/generic/backport-6.1/733-v6.5-26-net-ethernet-mtk_eth_soc-always-mtk_get_ib1_pkt_type.patch
deleted file mode 100644
index 2704faec12b0..000000000000
--- a/target/linux/generic/backport-6.1/733-v6.5-26-net-ethernet-mtk_eth_soc-always-mtk_get_ib1_pkt_type.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From b804f765485109f9644cc05d1e8fc79ca6c6e4aa Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 19 Jul 2023 01:39:36 +0100
-Subject: [PATCH 094/250] net: ethernet: mtk_eth_soc: always
- mtk_get_ib1_pkt_type
-
-entries and bind debugfs files would display wrong data on NETSYS_V2 and
-later because instead of using mtk_get_ib1_pkt_type the driver would use
-MTK_FOE_IB1_PACKET_TYPE which corresponds to NETSYS_V1(.x) SoCs.
-Use mtk_get_ib1_pkt_type so entries and bind records display correctly.
-
-Fixes: 03a3180e5c09e ("net: ethernet: mtk_eth_soc: introduce flow offloading support for mt7986")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Link: https://lore.kernel.org/r/c0ae03d0182f4d27b874cbdf0059bc972c317f3c.1689727134.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-@@ -98,7 +98,7 @@ mtk_ppe_debugfs_foe_show(struct seq_file
- 
- 		acct = mtk_foe_entry_get_mib(ppe, i, NULL);
- 
--		type = FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, entry->ib1);
-+		type = mtk_get_ib1_pkt_type(ppe->eth, entry->ib1);
- 		seq_printf(m, "%05x %s %7s", i,
- 			   mtk_foe_entry_state_str(state),
- 			   mtk_foe_pkt_type_str(type));
diff --git a/target/linux/generic/backport-6.1/734-v6.8-net-phy-bcm54612e-add-suspend-resume.patch b/target/linux/generic/backport-6.1/734-v6.8-net-phy-bcm54612e-add-suspend-resume.patch
deleted file mode 100644
index 64d1b160d3d3..000000000000
--- a/target/linux/generic/backport-6.1/734-v6.8-net-phy-bcm54612e-add-suspend-resume.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 380b50ae3a04222334a3779b3787eba844b1177f Mon Sep 17 00:00:00 2001
-From: Marco von Rosenberg <marcovr@selfnet.de>
-Date: Thu, 16 Nov 2023 20:32:31 +0100
-Subject: net: phy: broadcom: Wire suspend/resume for BCM54612E
-
-The BCM54612E ethernet PHY supports IDDQ-SR.
-Therefore wire-up the suspend and resume callbacks
-to point to bcm54xx_suspend() and bcm54xx_resume().
-
-Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de>
-Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/broadcom.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -942,6 +942,8 @@ static struct phy_driver broadcom_driver
- 	.config_intr	= bcm_phy_config_intr,
- 	.handle_interrupt = bcm_phy_handle_interrupt,
- 	.link_change_notify	= bcm54xx_link_change_notify,
-+	.suspend	= bcm54xx_suspend,
-+	.resume		= bcm54xx_resume,
- }, {
- 	.phy_id		= PHY_ID_BCM54616S,
- 	.phy_id_mask	= 0xfffffff0,
diff --git a/target/linux/generic/backport-6.1/750-v6.5-01-net-ethernet-mtk_ppe-add-MTK_FOE_ENTRY_V-1-2-_SIZE-m.patch b/target/linux/generic/backport-6.1/750-v6.5-01-net-ethernet-mtk_ppe-add-MTK_FOE_ENTRY_V-1-2-_SIZE-m.patch
deleted file mode 100644
index afce0cf04c0a..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-01-net-ethernet-mtk_ppe-add-MTK_FOE_ENTRY_V-1-2-_SIZE-m.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 5ea0e1312bcfebc06b5f91d1bb82b823d6395125 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Wed, 19 Jul 2023 12:29:49 +0200
-Subject: [PATCH 095/250] net: ethernet: mtk_ppe: add MTK_FOE_ENTRY_V{1,2}_SIZE
- macros
-
-Introduce MTK_FOE_ENTRY_V{1,2}_SIZE macros in order to make more
-explicit foe_entry size for different chipset revisions.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 10 +++++-----
- drivers/net/ethernet/mediatek/mtk_ppe.h     |  3 +++
- 2 files changed, 8 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4764,7 +4764,7 @@ static const struct mtk_soc_data mt7621_
- 	.required_pctl = false,
- 	.offload_version = 1,
- 	.hash_offset = 2,
--	.foe_entry_size = sizeof(struct mtk_foe_entry) - 16,
-+	.foe_entry_size = MTK_FOE_ENTRY_V1_SIZE,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma),
- 		.rxd_size = sizeof(struct mtk_rx_dma),
-@@ -4785,7 +4785,7 @@ static const struct mtk_soc_data mt7622_
- 	.offload_version = 2,
- 	.hash_offset = 2,
- 	.has_accounting = true,
--	.foe_entry_size = sizeof(struct mtk_foe_entry) - 16,
-+	.foe_entry_size = MTK_FOE_ENTRY_V1_SIZE,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma),
- 		.rxd_size = sizeof(struct mtk_rx_dma),
-@@ -4804,7 +4804,7 @@ static const struct mtk_soc_data mt7623_
- 	.required_pctl = true,
- 	.offload_version = 1,
- 	.hash_offset = 2,
--	.foe_entry_size = sizeof(struct mtk_foe_entry) - 16,
-+	.foe_entry_size = MTK_FOE_ENTRY_V1_SIZE,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma),
- 		.rxd_size = sizeof(struct mtk_rx_dma),
-@@ -4842,8 +4842,8 @@ static const struct mtk_soc_data mt7981_
- 	.required_pctl = false,
- 	.offload_version = 2,
- 	.hash_offset = 4,
--	.foe_entry_size = sizeof(struct mtk_foe_entry),
- 	.has_accounting = true,
-+	.foe_entry_size = MTK_FOE_ENTRY_V2_SIZE,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma_v2),
- 		.rxd_size = sizeof(struct mtk_rx_dma_v2),
-@@ -4863,8 +4863,8 @@ static const struct mtk_soc_data mt7986_
- 	.required_pctl = false,
- 	.offload_version = 2,
- 	.hash_offset = 4,
--	.foe_entry_size = sizeof(struct mtk_foe_entry),
- 	.has_accounting = true,
-+	.foe_entry_size = MTK_FOE_ENTRY_V2_SIZE,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma_v2),
- 		.rxd_size = sizeof(struct mtk_rx_dma_v2),
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -216,6 +216,9 @@ struct mtk_foe_ipv6_6rd {
- 	struct mtk_foe_mac_info l2;
- };
- 
-+#define MTK_FOE_ENTRY_V1_SIZE	80
-+#define MTK_FOE_ENTRY_V2_SIZE	96
-+
- struct mtk_foe_entry {
- 	u32 ib1;
- 
diff --git a/target/linux/generic/backport-6.1/750-v6.5-02-net-ethernet-mtk_eth_soc-remove-incorrect-PLL-config.patch b/target/linux/generic/backport-6.1/750-v6.5-02-net-ethernet-mtk_eth_soc-remove-incorrect-PLL-config.patch
deleted file mode 100644
index 28bf2b6d5f3e..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-02-net-ethernet-mtk_eth_soc-remove-incorrect-PLL-config.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From 8cfa2576d79f9379d167a8994f0fca935c07a8bc Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Sat, 22 Jul 2023 21:32:49 +0100
-Subject: [PATCH 096/250] net: ethernet: mtk_eth_soc: remove incorrect PLL
- configuration
-
-MT7623 GMAC0 attempts to configure the system clocking according to the
-required speed in the .mac_config callback for non-SGMII, non-baseX and
-non-TRGMII modes.
-
-state->speed setting has never been reliable in the .mac_config
-callback - there are cases where this is not the link speed,
-particularly via ethtool paths, so this has always been unreliable (as
-detailed in phylink's documentation.)
-
-There is the additional issue that mtk_gmac0_rgmii_adjust() will only
-be called if state->interface changes, which means it only configures
-the system clocking on the very first .mac_config call, which will be
-made when the network device is first brought up before any link is
-established.
-
-Essentially, this code is incredibly buggy, and probably never worked.
-
-Moreover, checking the in-kernel DT files, it seems no platform makes
-use of this code path.
-
-Therefore, let's remove it, and disable interface modes for port 0 that
-are not SGMII, 1000base-X, 2500base-X or TRGMII on the MT7623.
-
-Reviewed-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 54 ++++++---------------
- drivers/net/ethernet/mediatek/mtk_eth_soc.h |  1 +
- 2 files changed, 17 insertions(+), 38 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -352,7 +352,7 @@ static int mt7621_gmac0_rgmii_adjust(str
- }
- 
- static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth,
--				   phy_interface_t interface, int speed)
-+				   phy_interface_t interface)
- {
- 	u32 val;
- 	int ret;
-@@ -366,26 +366,7 @@ static void mtk_gmac0_rgmii_adjust(struc
- 		return;
- 	}
- 
--	val = (speed == SPEED_1000) ?
--		INTF_MODE_RGMII_1000 : INTF_MODE_RGMII_10_100;
--	mtk_w32(eth, val, INTF_MODE);
--
--	regmap_update_bits(eth->ethsys, ETHSYS_CLKCFG0,
--			   ETHSYS_TRGMII_CLK_SEL362_5,
--			   ETHSYS_TRGMII_CLK_SEL362_5);
--
--	val = (speed == SPEED_1000) ? 250000000 : 500000000;
--	ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], val);
--	if (ret)
--		dev_err(eth->dev, "Failed to set trgmii pll: %d\n", ret);
--
--	val = (speed == SPEED_1000) ?
--		RCK_CTRL_RGMII_1000 : RCK_CTRL_RGMII_10_100;
--	mtk_w32(eth, val, TRGMII_RCK_CTRL);
--
--	val = (speed == SPEED_1000) ?
--		TCK_CTRL_RGMII_1000 : TCK_CTRL_RGMII_10_100;
--	mtk_w32(eth, val, TRGMII_TCK_CTRL);
-+	dev_err(eth->dev, "Missing PLL configuration, ethernet may not work\n");
- }
- 
- static struct phylink_pcs *mtk_mac_select_pcs(struct phylink_config *config,
-@@ -471,17 +452,8 @@ static void mtk_mac_config(struct phylin
- 							      state->interface))
- 					goto err_phy;
- 			} else {
--				/* FIXME: this is incorrect. Not only does it
--				 * use state->speed (which is not guaranteed
--				 * to be correct) but it also makes use of it
--				 * in a code path that will only be reachable
--				 * when the PHY interface mode changes, not
--				 * when the speed changes. Consequently, RGMII
--				 * is probably broken.
--				 */
- 				mtk_gmac0_rgmii_adjust(mac->hw,
--						       state->interface,
--						       state->speed);
-+						       state->interface);
- 
- 				/* mt7623_pad_clk_setup */
- 				for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
-@@ -4341,13 +4313,19 @@ static int mtk_add_mac(struct mtk_eth *e
- 	mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- 		MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD;
- 
--	__set_bit(PHY_INTERFACE_MODE_MII,
--		  mac->phylink_config.supported_interfaces);
--	__set_bit(PHY_INTERFACE_MODE_GMII,
--		  mac->phylink_config.supported_interfaces);
-+	/* MT7623 gmac0 is now missing its speed-specific PLL configuration
-+	 * in its .mac_config method (since state->speed is not valid there.
-+	 * Disable support for MII, GMII and RGMII.
-+	 */
-+	if (!mac->hw->soc->disable_pll_modes || mac->id != 0) {
-+		__set_bit(PHY_INTERFACE_MODE_MII,
-+			  mac->phylink_config.supported_interfaces);
-+		__set_bit(PHY_INTERFACE_MODE_GMII,
-+			  mac->phylink_config.supported_interfaces);
- 
--	if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII))
--		phy_interface_set_rgmii(mac->phylink_config.supported_interfaces);
-+		if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII))
-+			phy_interface_set_rgmii(mac->phylink_config.supported_interfaces);
-+	}
- 
- 	if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_TRGMII) && !mac->id)
- 		__set_bit(PHY_INTERFACE_MODE_TRGMII,
-@@ -4805,6 +4783,7 @@ static const struct mtk_soc_data mt7623_
- 	.offload_version = 1,
- 	.hash_offset = 2,
- 	.foe_entry_size = MTK_FOE_ENTRY_V1_SIZE,
-+	.disable_pll_modes = true,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma),
- 		.rxd_size = sizeof(struct mtk_rx_dma),
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1030,6 +1030,7 @@ struct mtk_soc_data {
- 	u16		foe_entry_size;
- 	netdev_features_t hw_features;
- 	bool		has_accounting;
-+	bool		disable_pll_modes;
- 	struct {
- 		u32	txd_size;
- 		u32	rxd_size;
diff --git a/target/linux/generic/backport-6.1/750-v6.5-03-net-ethernet-mtk_eth_soc-remove-mac_pcs_get_state-an.patch b/target/linux/generic/backport-6.1/750-v6.5-03-net-ethernet-mtk_eth_soc-remove-mac_pcs_get_state-an.patch
deleted file mode 100644
index fd458a67bce2..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-03-net-ethernet-mtk_eth_soc-remove-mac_pcs_get_state-an.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From a4c2233b1e4359b6c64b6f9ba98c8718a11fffee Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Sat, 22 Jul 2023 21:32:54 +0100
-Subject: [PATCH 097/250] net: ethernet: mtk_eth_soc: remove mac_pcs_get_state
- and modernise
-
-Remove the .mac_pcs_get_state function, since as far as I can tell is
-never called - no DT appears to specify an in-band-status management
-nor SFP support for this driver.
-
-Removal of this, along with the previous patch to remove the incorrect
-clocking configuration, means that the driver becomes non-legacy, so
-we can remove the "legacy_pre_march2020" status from this driver.
-
-Reviewed-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 35 ---------------------
- 1 file changed, 35 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -554,38 +554,6 @@ static int mtk_mac_finish(struct phylink
- 	return 0;
- }
- 
--static void mtk_mac_pcs_get_state(struct phylink_config *config,
--				  struct phylink_link_state *state)
--{
--	struct mtk_mac *mac = container_of(config, struct mtk_mac,
--					   phylink_config);
--	u32 pmsr = mtk_r32(mac->hw, MTK_MAC_MSR(mac->id));
--
--	state->link = (pmsr & MAC_MSR_LINK);
--	state->duplex = (pmsr & MAC_MSR_DPX) >> 1;
--
--	switch (pmsr & (MAC_MSR_SPEED_1000 | MAC_MSR_SPEED_100)) {
--	case 0:
--		state->speed = SPEED_10;
--		break;
--	case MAC_MSR_SPEED_100:
--		state->speed = SPEED_100;
--		break;
--	case MAC_MSR_SPEED_1000:
--		state->speed = SPEED_1000;
--		break;
--	default:
--		state->speed = SPEED_UNKNOWN;
--		break;
--	}
--
--	state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX);
--	if (pmsr & MAC_MSR_RX_FC)
--		state->pause |= MLO_PAUSE_RX;
--	if (pmsr & MAC_MSR_TX_FC)
--		state->pause |= MLO_PAUSE_TX;
--}
--
- static void mtk_mac_link_down(struct phylink_config *config, unsigned int mode,
- 			      phy_interface_t interface)
- {
-@@ -707,7 +675,6 @@ static void mtk_mac_link_up(struct phyli
- 
- static const struct phylink_mac_ops mtk_phylink_ops = {
- 	.mac_select_pcs = mtk_mac_select_pcs,
--	.mac_pcs_get_state = mtk_mac_pcs_get_state,
- 	.mac_config = mtk_mac_config,
- 	.mac_finish = mtk_mac_finish,
- 	.mac_link_down = mtk_mac_link_down,
-@@ -4308,8 +4275,6 @@ static int mtk_add_mac(struct mtk_eth *e
- 
- 	mac->phylink_config.dev = &eth->netdev[id]->dev;
- 	mac->phylink_config.type = PHYLINK_NETDEV;
--	/* This driver makes use of state->speed in mac_config */
--	mac->phylink_config.legacy_pre_march2020 = true;
- 	mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- 		MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD;
- 
diff --git a/target/linux/generic/backport-6.1/750-v6.5-05-net-ethernet-mtk_eth_soc-add-version-in-mtk_soc_data.patch b/target/linux/generic/backport-6.1/750-v6.5-05-net-ethernet-mtk_eth_soc-add-version-in-mtk_soc_data.patch
deleted file mode 100644
index aa259e717592..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-05-net-ethernet-mtk_eth_soc-add-version-in-mtk_soc_data.patch
+++ /dev/null
@@ -1,550 +0,0 @@
-From 5d8d05fbf804b4485646d39551ac27452e45afd3 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Tue, 25 Jul 2023 01:52:02 +0100
-Subject: [PATCH 099/250] net: ethernet: mtk_eth_soc: add version in
- mtk_soc_data
-
-Introduce version field in mtk_soc_data data structure in order to
-make mtk_eth driver easier to maintain for chipset configuration
-codebase. Get rid of MTK_NETSYS_V2 bit in chip capabilities.
-This is a preliminary patch to introduce support for MT7988 SoC.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/e52fae302ca135436e5cdd26d38d87be2da63055.1690246066.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c   | 55 +++++++++++--------
- drivers/net/ethernet/mediatek/mtk_eth_soc.h   | 36 +++++++-----
- drivers/net/ethernet/mediatek/mtk_ppe.c       | 18 +++---
- .../net/ethernet/mediatek/mtk_ppe_offload.c   |  2 +-
- drivers/net/ethernet/mediatek/mtk_wed.c       |  4 +-
- 5 files changed, 66 insertions(+), 49 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -579,7 +579,7 @@ static void mtk_set_queue_speed(struct m
- 	      FIELD_PREP(MTK_QTX_SCH_MIN_RATE_MAN, 1) |
- 	      FIELD_PREP(MTK_QTX_SCH_MIN_RATE_EXP, 4) |
- 	      MTK_QTX_SCH_LEAKY_BUCKET_SIZE;
--	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v1(eth))
- 		val |= MTK_QTX_SCH_LEAKY_BUCKET_EN;
- 
- 	if (IS_ENABLED(CONFIG_SOC_MT7621)) {
-@@ -954,7 +954,7 @@ static bool mtk_rx_get_desc(struct mtk_e
- 	rxd->rxd1 = READ_ONCE(dma_rxd->rxd1);
- 	rxd->rxd3 = READ_ONCE(dma_rxd->rxd3);
- 	rxd->rxd4 = READ_ONCE(dma_rxd->rxd4);
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		rxd->rxd5 = READ_ONCE(dma_rxd->rxd5);
- 		rxd->rxd6 = READ_ONCE(dma_rxd->rxd6);
- 	}
-@@ -1012,7 +1012,7 @@ static int mtk_init_fq_dma(struct mtk_et
- 
- 		txd->txd3 = TX_DMA_PLEN0(MTK_QDMA_PAGE_SIZE);
- 		txd->txd4 = 0;
--		if (MTK_HAS_CAPS(soc->caps, MTK_NETSYS_V2)) {
-+		if (mtk_is_netsys_v2_or_greater(eth)) {
- 			txd->txd5 = 0;
- 			txd->txd6 = 0;
- 			txd->txd7 = 0;
-@@ -1203,7 +1203,7 @@ static void mtk_tx_set_dma_desc(struct n
- 	struct mtk_mac *mac = netdev_priv(dev);
- 	struct mtk_eth *eth = mac->hw;
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		mtk_tx_set_dma_desc_v2(dev, txd, info);
- 	else
- 		mtk_tx_set_dma_desc_v1(dev, txd, info);
-@@ -1510,7 +1510,7 @@ static void mtk_update_rx_cpu_idx(struct
- 
- static bool mtk_page_pool_enabled(struct mtk_eth *eth)
- {
--	return MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2);
-+	return eth->soc->version == 2;
- }
- 
- static struct page_pool *mtk_create_page_pool(struct mtk_eth *eth,
-@@ -1852,7 +1852,7 @@ static int mtk_poll_rx(struct napi_struc
- 			break;
- 
- 		/* find out which mac the packet come from. values start at 1 */
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+		if (mtk_is_netsys_v2_or_greater(eth))
- 			mac = RX_DMA_GET_SPORT_V2(trxd.rxd5) - 1;
- 		else if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) &&
- 			 !(trxd.rxd4 & RX_DMA_SPECIAL_TAG))
-@@ -1948,7 +1948,7 @@ static int mtk_poll_rx(struct napi_struc
- 		skb->dev = netdev;
- 		bytes += skb->len;
- 
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+		if (mtk_is_netsys_v2_or_greater(eth)) {
- 			reason = FIELD_GET(MTK_RXD5_PPE_CPU_REASON, trxd.rxd5);
- 			hash = trxd.rxd5 & MTK_RXD5_FOE_ENTRY;
- 			if (hash != MTK_RXD5_FOE_ENTRY)
-@@ -1973,8 +1973,8 @@ static int mtk_poll_rx(struct napi_struc
- 		/* When using VLAN untagging in combination with DSA, the
- 		 * hardware treats the MTK special tag as a VLAN and untags it.
- 		 */
--		if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2) &&
--		    (trxd.rxd2 & RX_DMA_VTAG) && netdev_uses_dsa(netdev)) {
-+		if (mtk_is_netsys_v1(eth) && (trxd.rxd2 & RX_DMA_VTAG) &&
-+		    netdev_uses_dsa(netdev)) {
- 			unsigned int port = RX_DMA_VPID(trxd.rxd3) & GENMASK(2, 0);
- 
- 			if (port < ARRAY_SIZE(eth->dsa_meta) &&
-@@ -2284,7 +2284,7 @@ static int mtk_tx_alloc(struct mtk_eth *
- 		txd->txd2 = next_ptr;
- 		txd->txd3 = TX_DMA_LS0 | TX_DMA_OWNER_CPU;
- 		txd->txd4 = 0;
--		if (MTK_HAS_CAPS(soc->caps, MTK_NETSYS_V2)) {
-+		if (mtk_is_netsys_v2_or_greater(eth)) {
- 			txd->txd5 = 0;
- 			txd->txd6 = 0;
- 			txd->txd7 = 0;
-@@ -2337,14 +2337,14 @@ static int mtk_tx_alloc(struct mtk_eth *
- 			      FIELD_PREP(MTK_QTX_SCH_MIN_RATE_MAN, 1) |
- 			      FIELD_PREP(MTK_QTX_SCH_MIN_RATE_EXP, 4) |
- 			      MTK_QTX_SCH_LEAKY_BUCKET_SIZE;
--			if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+			if (mtk_is_netsys_v1(eth))
- 				val |= MTK_QTX_SCH_LEAKY_BUCKET_EN;
- 			mtk_w32(eth, val, soc->reg_map->qdma.qtx_sch + ofs);
- 			ofs += MTK_QTX_OFFSET;
- 		}
- 		val = MTK_QDMA_TX_SCH_MAX_WFQ | (MTK_QDMA_TX_SCH_MAX_WFQ << 16);
- 		mtk_w32(eth, val, soc->reg_map->qdma.tx_sch_rate);
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+		if (mtk_is_netsys_v2_or_greater(eth))
- 			mtk_w32(eth, val, soc->reg_map->qdma.tx_sch_rate + 4);
- 	} else {
- 		mtk_w32(eth, ring->phys_pdma, MT7628_TX_BASE_PTR0);
-@@ -2473,7 +2473,7 @@ static int mtk_rx_alloc(struct mtk_eth *
- 
- 		rxd->rxd3 = 0;
- 		rxd->rxd4 = 0;
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+		if (mtk_is_netsys_v2_or_greater(eth)) {
- 			rxd->rxd5 = 0;
- 			rxd->rxd6 = 0;
- 			rxd->rxd7 = 0;
-@@ -3024,7 +3024,7 @@ static int mtk_start_dma(struct mtk_eth
- 		       MTK_TX_BT_32DWORDS | MTK_NDP_CO_PRO |
- 		       MTK_RX_2B_OFFSET | MTK_TX_WB_DDONE;
- 
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+		if (mtk_is_netsys_v2_or_greater(eth))
- 			val |= MTK_MUTLI_CNT | MTK_RESV_BUF |
- 			       MTK_WCOMP_EN | MTK_DMAD_WR_WDONE |
- 			       MTK_CHK_DDONE_EN | MTK_LEAKY_BUCKET_EN;
-@@ -3166,7 +3166,7 @@ static int mtk_open(struct net_device *d
- 	phylink_start(mac->phylink);
- 	netif_tx_start_all_queues(dev);
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return 0;
- 
- 	if (mtk_uses_dsa(dev) && !eth->prog) {
-@@ -3431,7 +3431,7 @@ static void mtk_hw_reset(struct mtk_eth
- {
- 	u32 val;
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN, 0);
- 		val = RSTCTRL_PPE0_V2;
- 	} else {
-@@ -3443,7 +3443,7 @@ static void mtk_hw_reset(struct mtk_eth
- 
- 	ethsys_reset(eth, RSTCTRL_ETH | RSTCTRL_FE | val);
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN,
- 			     0x3ffffff);
- }
-@@ -3469,7 +3469,7 @@ static void mtk_hw_warm_reset(struct mtk
- 		return;
- 	}
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		rst_mask = RSTCTRL_ETH | RSTCTRL_PPE0_V2;
- 	else
- 		rst_mask = RSTCTRL_ETH | RSTCTRL_PPE0;
-@@ -3639,7 +3639,7 @@ static int mtk_hw_init(struct mtk_eth *e
- 	else
- 		mtk_hw_reset(eth);
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		/* Set FE to PDMAv2 if necessary */
- 		val = mtk_r32(eth, MTK_FE_GLO_MISC);
- 		mtk_w32(eth,  val | BIT(4), MTK_FE_GLO_MISC);
-@@ -3676,7 +3676,7 @@ static int mtk_hw_init(struct mtk_eth *e
- 	 */
- 	val = mtk_r32(eth, MTK_CDMQ_IG_CTRL);
- 	mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL);
--	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v1(eth)) {
- 		val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
- 		mtk_w32(eth, val | MTK_CDMP_STAG_EN, MTK_CDMP_IG_CTRL);
- 
-@@ -3698,7 +3698,7 @@ static int mtk_hw_init(struct mtk_eth *e
- 	mtk_w32(eth, eth->soc->txrx.rx_irq_done_mask, reg_map->qdma.int_grp + 4);
- 	mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		/* PSE should not drop port8 and port9 packets from WDMA Tx */
- 		mtk_w32(eth, 0x00000300, PSE_DROP_CFG);
- 
-@@ -4487,7 +4487,7 @@ static int mtk_probe(struct platform_dev
- 		}
- 	}
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- 		if (!res) {
- 			err = -EINVAL;
-@@ -4595,9 +4595,8 @@ static int mtk_probe(struct platform_dev
- 	}
- 
- 	if (eth->soc->offload_version) {
--		u32 num_ppe;
-+		u32 num_ppe = mtk_is_netsys_v2_or_greater(eth) ? 2 : 1;
- 
--		num_ppe = MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2) ? 2 : 1;
- 		num_ppe = min_t(u32, ARRAY_SIZE(eth->ppe), num_ppe);
- 		for (i = 0; i < num_ppe; i++) {
- 			u32 ppe_addr = eth->soc->reg_map->ppe_base + i * 0x400;
-@@ -4689,6 +4688,7 @@ static const struct mtk_soc_data mt2701_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7623_CLKS_BITMAP,
- 	.required_pctl = true,
-+	.version = 1,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma),
- 		.rxd_size = sizeof(struct mtk_rx_dma),
-@@ -4705,6 +4705,7 @@ static const struct mtk_soc_data mt7621_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7621_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.version = 1,
- 	.offload_version = 1,
- 	.hash_offset = 2,
- 	.foe_entry_size = MTK_FOE_ENTRY_V1_SIZE,
-@@ -4725,6 +4726,7 @@ static const struct mtk_soc_data mt7622_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7622_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.version = 1,
- 	.offload_version = 2,
- 	.hash_offset = 2,
- 	.has_accounting = true,
-@@ -4745,6 +4747,7 @@ static const struct mtk_soc_data mt7623_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7623_CLKS_BITMAP,
- 	.required_pctl = true,
-+	.version = 1,
- 	.offload_version = 1,
- 	.hash_offset = 2,
- 	.foe_entry_size = MTK_FOE_ENTRY_V1_SIZE,
-@@ -4767,6 +4770,7 @@ static const struct mtk_soc_data mt7629_
- 	.required_clks = MT7629_CLKS_BITMAP,
- 	.required_pctl = false,
- 	.has_accounting = true,
-+	.version = 1,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma),
- 		.rxd_size = sizeof(struct mtk_rx_dma),
-@@ -4784,6 +4788,7 @@ static const struct mtk_soc_data mt7981_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7981_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.version = 2,
- 	.offload_version = 2,
- 	.hash_offset = 4,
- 	.has_accounting = true,
-@@ -4805,6 +4810,7 @@ static const struct mtk_soc_data mt7986_
- 	.hw_features = MTK_HW_FEATURES,
- 	.required_clks = MT7986_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.version = 2,
- 	.offload_version = 2,
- 	.hash_offset = 4,
- 	.has_accounting = true,
-@@ -4825,6 +4831,7 @@ static const struct mtk_soc_data rt5350_
- 	.hw_features = MTK_HW_FEATURES_MT7628,
- 	.required_clks = MT7628_CLKS_BITMAP,
- 	.required_pctl = false,
-+	.version = 1,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma),
- 		.rxd_size = sizeof(struct mtk_rx_dma),
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -820,7 +820,6 @@ enum mkt_eth_capabilities {
- 	MTK_SHARED_INT_BIT,
- 	MTK_TRGMII_MT7621_CLK_BIT,
- 	MTK_QDMA_BIT,
--	MTK_NETSYS_V2_BIT,
- 	MTK_SOC_MT7628_BIT,
- 	MTK_RSTCTRL_PPE1_BIT,
- 	MTK_U3_COPHY_V2_BIT,
-@@ -855,7 +854,6 @@ enum mkt_eth_capabilities {
- #define MTK_SHARED_INT		BIT(MTK_SHARED_INT_BIT)
- #define MTK_TRGMII_MT7621_CLK	BIT(MTK_TRGMII_MT7621_CLK_BIT)
- #define MTK_QDMA		BIT(MTK_QDMA_BIT)
--#define MTK_NETSYS_V2		BIT(MTK_NETSYS_V2_BIT)
- #define MTK_SOC_MT7628		BIT(MTK_SOC_MT7628_BIT)
- #define MTK_RSTCTRL_PPE1	BIT(MTK_RSTCTRL_PPE1_BIT)
- #define MTK_U3_COPHY_V2		BIT(MTK_U3_COPHY_V2_BIT)
-@@ -934,11 +932,11 @@ enum mkt_eth_capabilities {
- #define MT7981_CAPS  (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | MTK_GMAC2_GEPHY | \
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
- 		      MTK_MUX_U3_GMAC2_TO_QPHY | MTK_U3_COPHY_V2 | \
--		      MTK_NETSYS_V2 | MTK_RSTCTRL_PPE1)
-+		      MTK_RSTCTRL_PPE1)
- 
- #define MT7986_CAPS  (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | \
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
--		      MTK_NETSYS_V2 | MTK_RSTCTRL_PPE1)
-+		      MTK_RSTCTRL_PPE1)
- 
- struct mtk_tx_dma_desc_info {
- 	dma_addr_t	addr;
-@@ -1009,6 +1007,7 @@ struct mtk_reg_map {
-  * @required_pctl		A bool value to show whether the SoC requires
-  *				the extra setup for those pins used by GMAC.
-  * @hash_offset			Flow table hash offset.
-+ * @version			SoC version.
-  * @foe_entry_size		Foe table entry size.
-  * @has_accounting		Bool indicating support for accounting of
-  *				offloaded flows.
-@@ -1027,6 +1026,7 @@ struct mtk_soc_data {
- 	bool		required_pctl;
- 	u8		offload_version;
- 	u8		hash_offset;
-+	u8		version;
- 	u16		foe_entry_size;
- 	netdev_features_t hw_features;
- 	bool		has_accounting;
-@@ -1183,6 +1183,16 @@ struct mtk_mac {
- /* the struct describing the SoC. these are declared in the soc_xyz.c files */
- extern const struct of_device_id of_mtk_match[];
- 
-+static inline bool mtk_is_netsys_v1(struct mtk_eth *eth)
-+{
-+	return eth->soc->version == 1;
-+}
-+
-+static inline bool mtk_is_netsys_v2_or_greater(struct mtk_eth *eth)
-+{
-+	return eth->soc->version > 1;
-+}
-+
- static inline struct mtk_foe_entry *
- mtk_foe_get_entry(struct mtk_ppe *ppe, u16 hash)
- {
-@@ -1193,7 +1203,7 @@ mtk_foe_get_entry(struct mtk_ppe *ppe, u
- 
- static inline u32 mtk_get_ib1_ts_mask(struct mtk_eth *eth)
- {
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return MTK_FOE_IB1_BIND_TIMESTAMP_V2;
- 
- 	return MTK_FOE_IB1_BIND_TIMESTAMP;
-@@ -1201,7 +1211,7 @@ static inline u32 mtk_get_ib1_ts_mask(st
- 
- static inline u32 mtk_get_ib1_ppoe_mask(struct mtk_eth *eth)
- {
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return MTK_FOE_IB1_BIND_PPPOE_V2;
- 
- 	return MTK_FOE_IB1_BIND_PPPOE;
-@@ -1209,7 +1219,7 @@ static inline u32 mtk_get_ib1_ppoe_mask(
- 
- static inline u32 mtk_get_ib1_vlan_tag_mask(struct mtk_eth *eth)
- {
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return MTK_FOE_IB1_BIND_VLAN_TAG_V2;
- 
- 	return MTK_FOE_IB1_BIND_VLAN_TAG;
-@@ -1217,7 +1227,7 @@ static inline u32 mtk_get_ib1_vlan_tag_m
- 
- static inline u32 mtk_get_ib1_vlan_layer_mask(struct mtk_eth *eth)
- {
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return MTK_FOE_IB1_BIND_VLAN_LAYER_V2;
- 
- 	return MTK_FOE_IB1_BIND_VLAN_LAYER;
-@@ -1225,7 +1235,7 @@ static inline u32 mtk_get_ib1_vlan_layer
- 
- static inline u32 mtk_prep_ib1_vlan_layer(struct mtk_eth *eth, u32 val)
- {
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER_V2, val);
- 
- 	return FIELD_PREP(MTK_FOE_IB1_BIND_VLAN_LAYER, val);
-@@ -1233,7 +1243,7 @@ static inline u32 mtk_prep_ib1_vlan_laye
- 
- static inline u32 mtk_get_ib1_vlan_layer(struct mtk_eth *eth, u32 val)
- {
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return FIELD_GET(MTK_FOE_IB1_BIND_VLAN_LAYER_V2, val);
- 
- 	return FIELD_GET(MTK_FOE_IB1_BIND_VLAN_LAYER, val);
-@@ -1241,7 +1251,7 @@ static inline u32 mtk_get_ib1_vlan_layer
- 
- static inline u32 mtk_get_ib1_pkt_type_mask(struct mtk_eth *eth)
- {
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return MTK_FOE_IB1_PACKET_TYPE_V2;
- 
- 	return MTK_FOE_IB1_PACKET_TYPE;
-@@ -1249,7 +1259,7 @@ static inline u32 mtk_get_ib1_pkt_type_m
- 
- static inline u32 mtk_get_ib1_pkt_type(struct mtk_eth *eth, u32 val)
- {
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return FIELD_GET(MTK_FOE_IB1_PACKET_TYPE_V2, val);
- 
- 	return FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, val);
-@@ -1257,7 +1267,7 @@ static inline u32 mtk_get_ib1_pkt_type(s
- 
- static inline u32 mtk_get_ib2_multicast_mask(struct mtk_eth *eth)
- {
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		return MTK_FOE_IB2_MULTICAST_V2;
- 
- 	return MTK_FOE_IB2_MULTICAST;
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -207,7 +207,7 @@ int mtk_foe_entry_prepare(struct mtk_eth
- 
- 	memset(entry, 0, sizeof(*entry));
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		val = FIELD_PREP(MTK_FOE_IB1_STATE, MTK_FOE_STATE_BIND) |
- 		      FIELD_PREP(MTK_FOE_IB1_PACKET_TYPE_V2, type) |
- 		      FIELD_PREP(MTK_FOE_IB1_UDP, l4proto == IPPROTO_UDP) |
-@@ -271,7 +271,7 @@ int mtk_foe_entry_set_pse_port(struct mt
- 	u32 *ib2 = mtk_foe_entry_ib2(eth, entry);
- 	u32 val = *ib2;
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		val &= ~MTK_FOE_IB2_DEST_PORT_V2;
- 		val |= FIELD_PREP(MTK_FOE_IB2_DEST_PORT_V2, port);
- 	} else {
-@@ -422,7 +422,7 @@ int mtk_foe_entry_set_wdma(struct mtk_et
- 	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(eth, entry);
- 	u32 *ib2 = mtk_foe_entry_ib2(eth, entry);
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		*ib2 &= ~MTK_FOE_IB2_PORT_MG_V2;
- 		*ib2 |=  FIELD_PREP(MTK_FOE_IB2_RX_IDX, txq) |
- 			 MTK_FOE_IB2_WDMA_WINFO_V2;
-@@ -446,7 +446,7 @@ int mtk_foe_entry_set_queue(struct mtk_e
- {
- 	u32 *ib2 = mtk_foe_entry_ib2(eth, entry);
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		*ib2 &= ~MTK_FOE_IB2_QID_V2;
- 		*ib2 |= FIELD_PREP(MTK_FOE_IB2_QID_V2, queue);
- 		*ib2 |= MTK_FOE_IB2_PSE_QOS_V2;
-@@ -601,7 +601,7 @@ __mtk_foe_entry_commit(struct mtk_ppe *p
- 	struct mtk_foe_entry *hwe;
- 	u32 val;
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(eth)) {
- 		entry->ib1 &= ~MTK_FOE_IB1_BIND_TIMESTAMP_V2;
- 		entry->ib1 |= FIELD_PREP(MTK_FOE_IB1_BIND_TIMESTAMP_V2,
- 					 timestamp);
-@@ -617,7 +617,7 @@ __mtk_foe_entry_commit(struct mtk_ppe *p
- 	hwe->ib1 = entry->ib1;
- 
- 	if (ppe->accounting) {
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+		if (mtk_is_netsys_v2_or_greater(eth))
- 			val = MTK_FOE_IB2_MIB_CNT_V2;
- 		else
- 			val = MTK_FOE_IB2_MIB_CNT;
-@@ -965,7 +965,7 @@ void mtk_ppe_start(struct mtk_ppe *ppe)
- 			 MTK_PPE_SCAN_MODE_CHECK_AGE) |
- 	      FIELD_PREP(MTK_PPE_TB_CFG_ENTRY_NUM,
- 			 MTK_PPE_ENTRIES_SHIFT);
--	if (MTK_HAS_CAPS(ppe->eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(ppe->eth))
- 		val |= MTK_PPE_TB_CFG_INFO_SEL;
- 	ppe_w32(ppe, MTK_PPE_TB_CFG, val);
- 
-@@ -981,7 +981,7 @@ void mtk_ppe_start(struct mtk_ppe *ppe)
- 	      MTK_PPE_FLOW_CFG_IP4_NAPT |
- 	      MTK_PPE_FLOW_CFG_IP4_DSLITE |
- 	      MTK_PPE_FLOW_CFG_IP4_NAT_FRAG;
--	if (MTK_HAS_CAPS(ppe->eth->soc->caps, MTK_NETSYS_V2))
-+	if (mtk_is_netsys_v2_or_greater(ppe->eth))
- 		val |= MTK_PPE_MD_TOAP_BYP_CRSN0 |
- 		       MTK_PPE_MD_TOAP_BYP_CRSN1 |
- 		       MTK_PPE_MD_TOAP_BYP_CRSN2 |
-@@ -1023,7 +1023,7 @@ void mtk_ppe_start(struct mtk_ppe *ppe)
- 
- 	ppe_w32(ppe, MTK_PPE_DEFAULT_CPU_PORT, 0);
- 
--	if (MTK_HAS_CAPS(ppe->eth->soc->caps, MTK_NETSYS_V2)) {
-+	if (mtk_is_netsys_v2_or_greater(ppe->eth)) {
- 		ppe_w32(ppe, MTK_PPE_DEFAULT_CPU_PORT1, 0xcb777);
- 		ppe_w32(ppe, MTK_PPE_SBW_CTRL, 0x7f);
- 	}
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -193,7 +193,7 @@ mtk_flow_set_output_device(struct mtk_et
- 	if (mtk_flow_get_wdma_info(dev, dest_mac, &info) == 0) {
- 		mtk_foe_entry_set_wdma(eth, foe, info.wdma_idx, info.queue,
- 				       info.bss, info.wcid);
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
-+		if (mtk_is_netsys_v2_or_greater(eth)) {
- 			switch (info.wdma_idx) {
- 			case 0:
- 				pse_port = 8;
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -1084,7 +1084,7 @@ mtk_wed_rx_reset(struct mtk_wed_device *
- 	} else {
- 		struct mtk_eth *eth = dev->hw->eth;
- 
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2))
-+		if (mtk_is_netsys_v2_or_greater(eth))
- 			wed_set(dev, MTK_WED_RESET_IDX,
- 				MTK_WED_RESET_IDX_RX_V2);
- 		else
-@@ -1806,7 +1806,7 @@ void mtk_wed_add_hw(struct device_node *
- 	hw->wdma = wdma;
- 	hw->index = index;
- 	hw->irq = irq;
--	hw->version = MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2) ? 2 : 1;
-+	hw->version = mtk_is_netsys_v1(eth) ? 1 : 2;
- 
- 	if (hw->version == 1) {
- 		hw->mirror = syscon_regmap_lookup_by_phandle(eth_np,
diff --git a/target/linux/generic/backport-6.1/750-v6.5-06-net-ethernet-mtk_eth_soc-increase-MAX_DEVS-to-3.patch b/target/linux/generic/backport-6.1/750-v6.5-06-net-ethernet-mtk_eth_soc-increase-MAX_DEVS-to-3.patch
deleted file mode 100644
index 7b945bb869b1..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-06-net-ethernet-mtk_eth_soc-increase-MAX_DEVS-to-3.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From f8fb8dbd158c585be7574faf92db7d614b6722ff Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Tue, 25 Jul 2023 01:52:27 +0100
-Subject: [PATCH 100/250] net: ethernet: mtk_eth_soc: increase MAX_DEVS to 3
-
-This is a preliminary patch to add MT7988 SoC support since it runs 3
-macs instead of 2.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/3563e5fab367e7d79a7f1296fabaa5c20f202d7a.1690246066.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1043,8 +1043,8 @@ struct mtk_soc_data {
- 
- #define MTK_DMA_MONITOR_TIMEOUT		msecs_to_jiffies(1000)
- 
--/* currently no SoC has more than 2 macs */
--#define MTK_MAX_DEVS			2
-+/* currently no SoC has more than 3 macs */
-+#define MTK_MAX_DEVS	3
- 
- /* struct mtk_eth -	This is the main datasructure for holding the state
-  *			of the driver
diff --git a/target/linux/generic/backport-6.1/750-v6.5-07-net-ethernet-mtk_eth_soc-rely-on-MTK_MAX_DEVS-and-re.patch b/target/linux/generic/backport-6.1/750-v6.5-07-net-ethernet-mtk_eth_soc-rely-on-MTK_MAX_DEVS-and-re.patch
deleted file mode 100644
index 3db23f789710..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-07-net-ethernet-mtk_eth_soc-rely-on-MTK_MAX_DEVS-and-re.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From 856be974290f28d7943be2ac5a382c4139486196 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Tue, 25 Jul 2023 01:52:44 +0100
-Subject: [PATCH 101/250] net: ethernet: mtk_eth_soc: rely on MTK_MAX_DEVS and
- remove MTK_MAC_COUNT
-
-Get rid of MTK_MAC_COUNT since it is a duplicated of MTK_MAX_DEVS.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/1856f4266f2fc80677807b1bad867659e7b00c65.1690246066.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 49 ++++++++++++---------
- drivers/net/ethernet/mediatek/mtk_eth_soc.h |  1 -
- 2 files changed, 27 insertions(+), 23 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -880,7 +880,7 @@ static void mtk_stats_update(struct mtk_
- {
- 	int i;
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		if (!eth->mac[i] || !eth->mac[i]->hw_stats)
- 			continue;
- 		if (spin_trylock(&eth->mac[i]->hw_stats->stats_lock)) {
-@@ -1385,7 +1385,7 @@ static int mtk_queue_stopped(struct mtk_
- {
- 	int i;
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		if (!eth->netdev[i])
- 			continue;
- 		if (netif_queue_stopped(eth->netdev[i]))
-@@ -1399,7 +1399,7 @@ static void mtk_wake_queue(struct mtk_et
- {
- 	int i;
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		if (!eth->netdev[i])
- 			continue;
- 		netif_tx_wake_all_queues(eth->netdev[i]);
-@@ -1858,7 +1858,7 @@ static int mtk_poll_rx(struct napi_struc
- 			 !(trxd.rxd4 & RX_DMA_SPECIAL_TAG))
- 			mac = RX_DMA_GET_SPORT(trxd.rxd4) - 1;
- 
--		if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT ||
-+		if (unlikely(mac < 0 || mac >= MTK_MAX_DEVS ||
- 			     !eth->netdev[mac]))
- 			goto release_desc;
- 
-@@ -2898,7 +2898,7 @@ static void mtk_dma_free(struct mtk_eth
- 	const struct mtk_soc_data *soc = eth->soc;
- 	int i;
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++)
-+	for (i = 0; i < MTK_MAX_DEVS; i++)
- 		if (eth->netdev[i])
- 			netdev_reset_queue(eth->netdev[i]);
- 	if (eth->scratch_ring) {
-@@ -3052,8 +3052,13 @@ static void mtk_gdm_config(struct mtk_et
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
- 		return;
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
--		u32 val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i));
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
-+		u32 val;
-+
-+		if (!eth->netdev[i])
-+			continue;
-+
-+		val = mtk_r32(eth, MTK_GDMA_FWD_CFG(i));
- 
- 		/* default setup the forward port to send frame to PDMA */
- 		val &= ~0xffff;
-@@ -3063,7 +3068,7 @@ static void mtk_gdm_config(struct mtk_et
- 
- 		val |= config;
- 
--		if (eth->netdev[i] && netdev_uses_dsa(eth->netdev[i]))
-+		if (netdev_uses_dsa(eth->netdev[i]))
- 			val |= MTK_GDMA_SPECIAL_TAG;
- 
- 		mtk_w32(eth, val, MTK_GDMA_FWD_CFG(i));
-@@ -3660,15 +3665,15 @@ static int mtk_hw_init(struct mtk_eth *e
- 	 * up with the more appropriate value when mtk_mac_config call is being
- 	 * invoked.
- 	 */
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		struct net_device *dev = eth->netdev[i];
- 
--		mtk_w32(eth, MAC_MCR_FORCE_LINK_DOWN, MTK_MAC_MCR(i));
--		if (dev) {
--			struct mtk_mac *mac = netdev_priv(dev);
-+		if (!dev)
-+			continue;
- 
--			mtk_set_mcr_max_rx(mac, dev->mtu + MTK_RX_ETH_HLEN);
--		}
-+		mtk_w32(eth, MAC_MCR_FORCE_LINK_DOWN, MTK_MAC_MCR(i));
-+		mtk_set_mcr_max_rx(netdev_priv(dev),
-+				   dev->mtu + MTK_RX_ETH_HLEN);
- 	}
- 
- 	/* Indicates CDM to parse the MTK special tag from CPU
-@@ -3848,7 +3853,7 @@ static void mtk_pending_work(struct work
- 	mtk_prepare_for_reset(eth);
- 
- 	/* stop all devices to make sure that dma is properly shut down */
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		if (!eth->netdev[i] || !netif_running(eth->netdev[i]))
- 			continue;
- 
-@@ -3864,8 +3869,8 @@ static void mtk_pending_work(struct work
- 	mtk_hw_init(eth, true);
- 
- 	/* restart DMA and enable IRQs */
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
--		if (!test_bit(i, &restart))
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
-+		if (!eth->netdev[i] || !test_bit(i, &restart))
- 			continue;
- 
- 		if (mtk_open(eth->netdev[i])) {
-@@ -3892,7 +3897,7 @@ static int mtk_free_dev(struct mtk_eth *
- {
- 	int i;
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		if (!eth->netdev[i])
- 			continue;
- 		free_netdev(eth->netdev[i]);
-@@ -3911,7 +3916,7 @@ static int mtk_unreg_dev(struct mtk_eth
- {
- 	int i;
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		struct mtk_mac *mac;
- 		if (!eth->netdev[i])
- 			continue;
-@@ -4212,7 +4217,7 @@ static int mtk_add_mac(struct mtk_eth *e
- 	}
- 
- 	id = be32_to_cpup(_id);
--	if (id >= MTK_MAC_COUNT) {
-+	if (id >= MTK_MAX_DEVS) {
- 		dev_err(eth->dev, "%d is not a valid mac id\n", id);
- 		return -EINVAL;
- 	}
-@@ -4357,7 +4362,7 @@ void mtk_eth_set_dma_device(struct mtk_e
- 
- 	rtnl_lock();
- 
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		dev = eth->netdev[i];
- 
- 		if (!dev || !(dev->flags & IFF_UP))
-@@ -4663,7 +4668,7 @@ static int mtk_remove(struct platform_de
- 	int i;
- 
- 	/* stop all devices to make sure that dma is properly shut down */
--	for (i = 0; i < MTK_MAC_COUNT; i++) {
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
- 		if (!eth->netdev[i])
- 			continue;
- 		mtk_stop(eth->netdev[i]);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -33,7 +33,6 @@
- #define MTK_TX_DMA_BUF_LEN_V2	0xffff
- #define MTK_QDMA_RING_SIZE	2048
- #define MTK_DMA_SIZE		512
--#define MTK_MAC_COUNT		2
- #define MTK_RX_ETH_HLEN		(VLAN_ETH_HLEN + ETH_FCS_LEN)
- #define MTK_RX_HLEN		(NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
- #define MTK_DMA_DUMMY_DESC	0xffffffff
diff --git a/target/linux/generic/backport-6.1/750-v6.5-08-net-ethernet-mtk_eth_soc-add-NETSYS_V3-version-suppo.patch b/target/linux/generic/backport-6.1/750-v6.5-08-net-ethernet-mtk_eth_soc-add-NETSYS_V3-version-suppo.patch
deleted file mode 100644
index e40dc3d0a9f8..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-08-net-ethernet-mtk_eth_soc-add-NETSYS_V3-version-suppo.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-From a41d535855976838d246c079143c948dcf0f7931 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Tue, 25 Jul 2023 01:52:59 +0100
-Subject: [PATCH 102/250] net: ethernet: mtk_eth_soc: add NETSYS_V3 version
- support
-
-Introduce NETSYS_V3 chipset version support.
-This is a preliminary patch to introduce support for MT7988 SoC.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/0db2260910755d76fa48e303b9f9bdf4e5a82340.1690246066.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 105 ++++++++++++++------
- drivers/net/ethernet/mediatek/mtk_eth_soc.h |  48 +++++++--
- 2 files changed, 116 insertions(+), 37 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -860,17 +860,32 @@ void mtk_stats_update_mac(struct mtk_mac
- 			mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x20 + offs);
- 		hw_stats->rx_flow_control_packets +=
- 			mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x24 + offs);
--		hw_stats->tx_skip +=
--			mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x28 + offs);
--		hw_stats->tx_collisions +=
--			mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x2c + offs);
--		hw_stats->tx_bytes +=
--			mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x30 + offs);
--		stats =  mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x34 + offs);
--		if (stats)
--			hw_stats->tx_bytes += (stats << 32);
--		hw_stats->tx_packets +=
--			mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x38 + offs);
-+
-+		if (mtk_is_netsys_v3_or_greater(eth)) {
-+			hw_stats->tx_skip +=
-+				mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x50 + offs);
-+			hw_stats->tx_collisions +=
-+				mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x54 + offs);
-+			hw_stats->tx_bytes +=
-+				mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x40 + offs);
-+			stats =  mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x44 + offs);
-+			if (stats)
-+				hw_stats->tx_bytes += (stats << 32);
-+			hw_stats->tx_packets +=
-+				mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x48 + offs);
-+		} else {
-+			hw_stats->tx_skip +=
-+				mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x28 + offs);
-+			hw_stats->tx_collisions +=
-+				mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x2c + offs);
-+			hw_stats->tx_bytes +=
-+				mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x30 + offs);
-+			stats =  mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x34 + offs);
-+			if (stats)
-+				hw_stats->tx_bytes += (stats << 32);
-+			hw_stats->tx_packets +=
-+				mtk_r32(mac->hw, reg_map->gdm1_cnt + 0x38 + offs);
-+		}
- 	}
- 
- 	u64_stats_update_end(&hw_stats->syncp);
-@@ -1174,7 +1189,10 @@ static void mtk_tx_set_dma_desc_v2(struc
- 		data |= TX_DMA_LS0;
- 	WRITE_ONCE(desc->txd3, data);
- 
--	data = (mac->id + 1) << TX_DMA_FPORT_SHIFT_V2; /* forward port */
-+	if (mac->id == MTK_GMAC3_ID)
-+		data = PSE_GDM3_PORT;
-+	else
-+		data = (mac->id + 1) << TX_DMA_FPORT_SHIFT_V2; /* forward port */
- 	data |= TX_DMA_SWC_V2 | QID_BITS_V2(info->qid);
- 	WRITE_ONCE(desc->txd4, data);
- 
-@@ -1185,6 +1203,8 @@ static void mtk_tx_set_dma_desc_v2(struc
- 		/* tx checksum offload */
- 		if (info->csum)
- 			data |= TX_DMA_CHKSUM_V2;
-+		if (mtk_is_netsys_v3_or_greater(eth) && netdev_uses_dsa(dev))
-+			data |= TX_DMA_SPTAG_V3;
- 	}
- 	WRITE_ONCE(desc->txd5, data);
- 
-@@ -1250,8 +1270,7 @@ static int mtk_tx_map(struct sk_buff *sk
- 	mtk_tx_set_dma_desc(dev, itxd, &txd_info);
- 
- 	itx_buf->flags |= MTK_TX_FLAGS_SINGLE0;
--	itx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 :
--			  MTK_TX_FLAGS_FPORT1;
-+	itx_buf->mac_id = mac->id;
- 	setup_tx_buf(eth, itx_buf, itxd_pdma, txd_info.addr, txd_info.size,
- 		     k++);
- 
-@@ -1299,8 +1318,7 @@ static int mtk_tx_map(struct sk_buff *sk
- 				memset(tx_buf, 0, sizeof(*tx_buf));
- 			tx_buf->data = (void *)MTK_DMA_DUMMY_DESC;
- 			tx_buf->flags |= MTK_TX_FLAGS_PAGE0;
--			tx_buf->flags |= (!mac->id) ? MTK_TX_FLAGS_FPORT0 :
--					 MTK_TX_FLAGS_FPORT1;
-+			tx_buf->mac_id = mac->id;
- 
- 			setup_tx_buf(eth, tx_buf, txd_pdma, txd_info.addr,
- 				     txd_info.size, k++);
-@@ -1602,7 +1620,7 @@ static int mtk_xdp_frame_map(struct mtk_
- 	}
- 	mtk_tx_set_dma_desc(dev, txd, txd_info);
- 
--	tx_buf->flags |= !mac->id ? MTK_TX_FLAGS_FPORT0 : MTK_TX_FLAGS_FPORT1;
-+	tx_buf->mac_id = mac->id;
- 	tx_buf->type = dma_map ? MTK_TYPE_XDP_NDO : MTK_TYPE_XDP_TX;
- 	tx_buf->data = (void *)MTK_DMA_DUMMY_DESC;
- 
-@@ -1852,11 +1870,24 @@ static int mtk_poll_rx(struct napi_struc
- 			break;
- 
- 		/* find out which mac the packet come from. values start at 1 */
--		if (mtk_is_netsys_v2_or_greater(eth))
--			mac = RX_DMA_GET_SPORT_V2(trxd.rxd5) - 1;
--		else if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) &&
--			 !(trxd.rxd4 & RX_DMA_SPECIAL_TAG))
-+		if (mtk_is_netsys_v2_or_greater(eth)) {
-+			u32 val = RX_DMA_GET_SPORT_V2(trxd.rxd5);
-+
-+			switch (val) {
-+			case PSE_GDM1_PORT:
-+			case PSE_GDM2_PORT:
-+				mac = val - 1;
-+				break;
-+			case PSE_GDM3_PORT:
-+				mac = MTK_GMAC3_ID;
-+				break;
-+			default:
-+				break;
-+			}
-+		} else if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) &&
-+			   !(trxd.rxd4 & RX_DMA_SPECIAL_TAG)) {
- 			mac = RX_DMA_GET_SPORT(trxd.rxd4) - 1;
-+		}
- 
- 		if (unlikely(mac < 0 || mac >= MTK_MAX_DEVS ||
- 			     !eth->netdev[mac]))
-@@ -2078,7 +2109,6 @@ static int mtk_poll_tx_qdma(struct mtk_e
- 
- 	while ((cpu != dma) && budget) {
- 		u32 next_cpu = desc->txd2;
--		int mac = 0;
- 
- 		desc = mtk_qdma_phys_to_virt(ring, desc->txd2);
- 		if ((desc->txd3 & TX_DMA_OWNER_CPU) == 0)
-@@ -2086,15 +2116,13 @@ static int mtk_poll_tx_qdma(struct mtk_e
- 
- 		tx_buf = mtk_desc_to_tx_buf(ring, desc,
- 					    eth->soc->txrx.txd_size);
--		if (tx_buf->flags & MTK_TX_FLAGS_FPORT1)
--			mac = 1;
--
- 		if (!tx_buf->data)
- 			break;
- 
- 		if (tx_buf->data != (void *)MTK_DMA_DUMMY_DESC) {
- 			if (tx_buf->type == MTK_TYPE_SKB)
--				mtk_poll_tx_done(eth, state, mac, tx_buf->data);
-+				mtk_poll_tx_done(eth, state, tx_buf->mac_id,
-+						 tx_buf->data);
- 
- 			budget--;
- 		}
-@@ -3703,7 +3731,24 @@ static int mtk_hw_init(struct mtk_eth *e
- 	mtk_w32(eth, eth->soc->txrx.rx_irq_done_mask, reg_map->qdma.int_grp + 4);
- 	mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);
- 
--	if (mtk_is_netsys_v2_or_greater(eth)) {
-+	if (mtk_is_netsys_v3_or_greater(eth)) {
-+		/* PSE should not drop port1, port8 and port9 packets */
-+		mtk_w32(eth, 0x00000302, PSE_DROP_CFG);
-+
-+		/* GDM and CDM Threshold */
-+		mtk_w32(eth, 0x00000707, MTK_CDMW0_THRES);
-+		mtk_w32(eth, 0x00000077, MTK_CDMW1_THRES);
-+
-+		/* Disable GDM1 RX CRC stripping */
-+		mtk_m32(eth, MTK_GDMA_STRP_CRC, 0, MTK_GDMA_FWD_CFG(0));
-+
-+		/* PSE GDM3 MIB counter has incorrect hw default values,
-+		 * so the driver ought to read clear the values beforehand
-+		 * in case ethtool retrieve wrong mib values.
-+		 */
-+		for (i = 0; i < 0x80; i += 0x4)
-+			mtk_r32(eth, reg_map->gdm1_cnt + 0x100 + i);
-+	} else if (!mtk_is_netsys_v1(eth)) {
- 		/* PSE should not drop port8 and port9 packets from WDMA Tx */
- 		mtk_w32(eth, 0x00000300, PSE_DROP_CFG);
- 
-@@ -4265,7 +4310,11 @@ static int mtk_add_mac(struct mtk_eth *e
- 	}
- 	spin_lock_init(&mac->hw_stats->stats_lock);
- 	u64_stats_init(&mac->hw_stats->syncp);
--	mac->hw_stats->reg_offset = id * MTK_STAT_OFFSET;
-+
-+	if (mtk_is_netsys_v3_or_greater(eth))
-+		mac->hw_stats->reg_offset = id * 0x80;
-+	else
-+		mac->hw_stats->reg_offset = id * 0x40;
- 
- 	/* phylink create */
- 	err = of_get_phy_mode(np, &phy_mode);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -122,6 +122,7 @@
- #define MTK_GDMA_ICS_EN		BIT(22)
- #define MTK_GDMA_TCS_EN		BIT(21)
- #define MTK_GDMA_UCS_EN		BIT(20)
-+#define MTK_GDMA_STRP_CRC	BIT(16)
- #define MTK_GDMA_TO_PDMA	0x0
- #define MTK_GDMA_DROP_ALL       0x7777
- 
-@@ -287,8 +288,6 @@
- /* QDMA Interrupt grouping registers */
- #define MTK_RLS_DONE_INT	BIT(0)
- 
--#define MTK_STAT_OFFSET		0x40
--
- /* QDMA TX NUM */
- #define QID_BITS_V2(x)		(((x) & 0x3f) << 16)
- #define MTK_QDMA_GMAC2_QID	8
-@@ -301,6 +300,8 @@
- #define TX_DMA_CHKSUM_V2	(0x7 << 28)
- #define TX_DMA_TSO_V2		BIT(31)
- 
-+#define TX_DMA_SPTAG_V3         BIT(27)
-+
- /* QDMA V2 descriptor txd4 */
- #define TX_DMA_FPORT_SHIFT_V2	8
- #define TX_DMA_FPORT_MASK_V2	0xf
-@@ -634,12 +635,6 @@ enum mtk_tx_flags {
- 	 */
- 	MTK_TX_FLAGS_SINGLE0	= 0x01,
- 	MTK_TX_FLAGS_PAGE0	= 0x02,
--
--	/* MTK_TX_FLAGS_FPORTx allows tracking which port the transmitted
--	 * SKB out instead of looking up through hardware TX descriptor.
--	 */
--	MTK_TX_FLAGS_FPORT0	= 0x04,
--	MTK_TX_FLAGS_FPORT1	= 0x08,
- };
- 
- /* This enum allows us to identify how the clock is defined on the array of the
-@@ -725,6 +720,35 @@ enum mtk_dev_state {
- 	MTK_RESETTING
- };
- 
-+/* PSE Port Definition */
-+enum mtk_pse_port {
-+	PSE_ADMA_PORT = 0,
-+	PSE_GDM1_PORT,
-+	PSE_GDM2_PORT,
-+	PSE_PPE0_PORT,
-+	PSE_PPE1_PORT,
-+	PSE_QDMA_TX_PORT,
-+	PSE_QDMA_RX_PORT,
-+	PSE_DROP_PORT,
-+	PSE_WDMA0_PORT,
-+	PSE_WDMA1_PORT,
-+	PSE_TDMA_PORT,
-+	PSE_NONE_PORT,
-+	PSE_PPE2_PORT,
-+	PSE_WDMA2_PORT,
-+	PSE_EIP197_PORT,
-+	PSE_GDM3_PORT,
-+	PSE_PORT_MAX
-+};
-+
-+/* GMAC Identifier */
-+enum mtk_gmac_id {
-+	MTK_GMAC1_ID = 0,
-+	MTK_GMAC2_ID,
-+	MTK_GMAC3_ID,
-+	MTK_GMAC_ID_MAX
-+};
-+
- enum mtk_tx_buf_type {
- 	MTK_TYPE_SKB,
- 	MTK_TYPE_XDP_TX,
-@@ -743,7 +767,8 @@ struct mtk_tx_buf {
- 	enum mtk_tx_buf_type type;
- 	void *data;
- 
--	u32 flags;
-+	u16 mac_id;
-+	u16 flags;
- 	DEFINE_DMA_UNMAP_ADDR(dma_addr0);
- 	DEFINE_DMA_UNMAP_LEN(dma_len0);
- 	DEFINE_DMA_UNMAP_ADDR(dma_addr1);
-@@ -1192,6 +1217,11 @@ static inline bool mtk_is_netsys_v2_or_g
- 	return eth->soc->version > 1;
- }
- 
-+static inline bool mtk_is_netsys_v3_or_greater(struct mtk_eth *eth)
-+{
-+	return eth->soc->version > 2;
-+}
-+
- static inline struct mtk_foe_entry *
- mtk_foe_get_entry(struct mtk_ppe *ppe, u16 hash)
- {
diff --git a/target/linux/generic/backport-6.1/750-v6.5-09-net-ethernet-mtk_eth_soc-convert-caps-in-mtk_soc_dat.patch b/target/linux/generic/backport-6.1/750-v6.5-09-net-ethernet-mtk_eth_soc-convert-caps-in-mtk_soc_dat.patch
deleted file mode 100644
index 7a0b285f2ca3..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-09-net-ethernet-mtk_eth_soc-convert-caps-in-mtk_soc_dat.patch
+++ /dev/null
@@ -1,193 +0,0 @@
-From db797ae0542220a98658229397da464c383c991c Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Tue, 25 Jul 2023 01:53:13 +0100
-Subject: [PATCH 103/250] net: ethernet: mtk_eth_soc: convert caps in
- mtk_soc_data struct to u64
-
-This is a preliminary patch to introduce support for MT7988 SoC.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/9499ac3670b2fc5b444404b84e8a4a169beabbf2.1690246066.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_path.c | 22 ++++----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h  | 56 ++++++++++----------
- 2 files changed, 39 insertions(+), 39 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_path.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_path.c
-@@ -15,10 +15,10 @@
- struct mtk_eth_muxc {
- 	const char	*name;
- 	int		cap_bit;
--	int		(*set_path)(struct mtk_eth *eth, int path);
-+	int		(*set_path)(struct mtk_eth *eth, u64 path);
- };
- 
--static const char *mtk_eth_path_name(int path)
-+static const char *mtk_eth_path_name(u64 path)
- {
- 	switch (path) {
- 	case MTK_ETH_PATH_GMAC1_RGMII:
-@@ -40,7 +40,7 @@ static const char *mtk_eth_path_name(int
- 	}
- }
- 
--static int set_mux_gdm1_to_gmac1_esw(struct mtk_eth *eth, int path)
-+static int set_mux_gdm1_to_gmac1_esw(struct mtk_eth *eth, u64 path)
- {
- 	bool updated = true;
- 	u32 val, mask, set;
-@@ -71,7 +71,7 @@ static int set_mux_gdm1_to_gmac1_esw(str
- 	return 0;
- }
- 
--static int set_mux_gmac2_gmac0_to_gephy(struct mtk_eth *eth, int path)
-+static int set_mux_gmac2_gmac0_to_gephy(struct mtk_eth *eth, u64 path)
- {
- 	unsigned int val = 0;
- 	bool updated = true;
-@@ -94,7 +94,7 @@ static int set_mux_gmac2_gmac0_to_gephy(
- 	return 0;
- }
- 
--static int set_mux_u3_gmac2_to_qphy(struct mtk_eth *eth, int path)
-+static int set_mux_u3_gmac2_to_qphy(struct mtk_eth *eth, u64 path)
- {
- 	unsigned int val = 0, mask = 0, reg = 0;
- 	bool updated = true;
-@@ -125,7 +125,7 @@ static int set_mux_u3_gmac2_to_qphy(stru
- 	return 0;
- }
- 
--static int set_mux_gmac1_gmac2_to_sgmii_rgmii(struct mtk_eth *eth, int path)
-+static int set_mux_gmac1_gmac2_to_sgmii_rgmii(struct mtk_eth *eth, u64 path)
- {
- 	unsigned int val = 0;
- 	bool updated = true;
-@@ -163,7 +163,7 @@ static int set_mux_gmac1_gmac2_to_sgmii_
- 	return 0;
- }
- 
--static int set_mux_gmac12_to_gephy_sgmii(struct mtk_eth *eth, int path)
-+static int set_mux_gmac12_to_gephy_sgmii(struct mtk_eth *eth, u64 path)
- {
- 	unsigned int val = 0;
- 	bool updated = true;
-@@ -218,7 +218,7 @@ static const struct mtk_eth_muxc mtk_eth
- 	},
- };
- 
--static int mtk_eth_mux_setup(struct mtk_eth *eth, int path)
-+static int mtk_eth_mux_setup(struct mtk_eth *eth, u64 path)
- {
- 	int i, err = 0;
- 
-@@ -249,7 +249,7 @@ out:
- 
- int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id)
- {
--	int path;
-+	u64 path;
- 
- 	path = (mac_id == 0) ?  MTK_ETH_PATH_GMAC1_SGMII :
- 				MTK_ETH_PATH_GMAC2_SGMII;
-@@ -260,7 +260,7 @@ int mtk_gmac_sgmii_path_setup(struct mtk
- 
- int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id)
- {
--	int path = 0;
-+	u64 path = 0;
- 
- 	if (mac_id == 1)
- 		path = MTK_ETH_PATH_GMAC2_GEPHY;
-@@ -274,7 +274,7 @@ int mtk_gmac_gephy_path_setup(struct mtk
- 
- int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id)
- {
--	int path;
-+	u64 path;
- 
- 	path = (mac_id == 0) ?  MTK_ETH_PATH_GMAC1_RGMII :
- 				MTK_ETH_PATH_GMAC2_RGMII;
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -866,41 +866,41 @@ enum mkt_eth_capabilities {
- };
- 
- /* Supported hardware group on SoCs */
--#define MTK_RGMII		BIT(MTK_RGMII_BIT)
--#define MTK_TRGMII		BIT(MTK_TRGMII_BIT)
--#define MTK_SGMII		BIT(MTK_SGMII_BIT)
--#define MTK_ESW			BIT(MTK_ESW_BIT)
--#define MTK_GEPHY		BIT(MTK_GEPHY_BIT)
--#define MTK_MUX			BIT(MTK_MUX_BIT)
--#define MTK_INFRA		BIT(MTK_INFRA_BIT)
--#define MTK_SHARED_SGMII	BIT(MTK_SHARED_SGMII_BIT)
--#define MTK_HWLRO		BIT(MTK_HWLRO_BIT)
--#define MTK_SHARED_INT		BIT(MTK_SHARED_INT_BIT)
--#define MTK_TRGMII_MT7621_CLK	BIT(MTK_TRGMII_MT7621_CLK_BIT)
--#define MTK_QDMA		BIT(MTK_QDMA_BIT)
--#define MTK_SOC_MT7628		BIT(MTK_SOC_MT7628_BIT)
--#define MTK_RSTCTRL_PPE1	BIT(MTK_RSTCTRL_PPE1_BIT)
--#define MTK_U3_COPHY_V2		BIT(MTK_U3_COPHY_V2_BIT)
-+#define MTK_RGMII		BIT_ULL(MTK_RGMII_BIT)
-+#define MTK_TRGMII		BIT_ULL(MTK_TRGMII_BIT)
-+#define MTK_SGMII		BIT_ULL(MTK_SGMII_BIT)
-+#define MTK_ESW			BIT_ULL(MTK_ESW_BIT)
-+#define MTK_GEPHY		BIT_ULL(MTK_GEPHY_BIT)
-+#define MTK_MUX			BIT_ULL(MTK_MUX_BIT)
-+#define MTK_INFRA		BIT_ULL(MTK_INFRA_BIT)
-+#define MTK_SHARED_SGMII	BIT_ULL(MTK_SHARED_SGMII_BIT)
-+#define MTK_HWLRO		BIT_ULL(MTK_HWLRO_BIT)
-+#define MTK_SHARED_INT		BIT_ULL(MTK_SHARED_INT_BIT)
-+#define MTK_TRGMII_MT7621_CLK	BIT_ULL(MTK_TRGMII_MT7621_CLK_BIT)
-+#define MTK_QDMA		BIT_ULL(MTK_QDMA_BIT)
-+#define MTK_SOC_MT7628		BIT_ULL(MTK_SOC_MT7628_BIT)
-+#define MTK_RSTCTRL_PPE1	BIT_ULL(MTK_RSTCTRL_PPE1_BIT)
-+#define MTK_U3_COPHY_V2		BIT_ULL(MTK_U3_COPHY_V2_BIT)
- 
- #define MTK_ETH_MUX_GDM1_TO_GMAC1_ESW		\
--	BIT(MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT)
-+	BIT_ULL(MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT)
- #define MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY	\
--	BIT(MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY_BIT)
-+	BIT_ULL(MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY_BIT)
- #define MTK_ETH_MUX_U3_GMAC2_TO_QPHY		\
--	BIT(MTK_ETH_MUX_U3_GMAC2_TO_QPHY_BIT)
-+	BIT_ULL(MTK_ETH_MUX_U3_GMAC2_TO_QPHY_BIT)
- #define MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII	\
--	BIT(MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT)
-+	BIT_ULL(MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT)
- #define MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII	\
--	BIT(MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII_BIT)
-+	BIT_ULL(MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII_BIT)
- 
- /* Supported path present on SoCs */
--#define MTK_ETH_PATH_GMAC1_RGMII	BIT(MTK_ETH_PATH_GMAC1_RGMII_BIT)
--#define MTK_ETH_PATH_GMAC1_TRGMII	BIT(MTK_ETH_PATH_GMAC1_TRGMII_BIT)
--#define MTK_ETH_PATH_GMAC1_SGMII	BIT(MTK_ETH_PATH_GMAC1_SGMII_BIT)
--#define MTK_ETH_PATH_GMAC2_RGMII	BIT(MTK_ETH_PATH_GMAC2_RGMII_BIT)
--#define MTK_ETH_PATH_GMAC2_SGMII	BIT(MTK_ETH_PATH_GMAC2_SGMII_BIT)
--#define MTK_ETH_PATH_GMAC2_GEPHY	BIT(MTK_ETH_PATH_GMAC2_GEPHY_BIT)
--#define MTK_ETH_PATH_GDM1_ESW		BIT(MTK_ETH_PATH_GDM1_ESW_BIT)
-+#define MTK_ETH_PATH_GMAC1_RGMII	BIT_ULL(MTK_ETH_PATH_GMAC1_RGMII_BIT)
-+#define MTK_ETH_PATH_GMAC1_TRGMII	BIT_ULL(MTK_ETH_PATH_GMAC1_TRGMII_BIT)
-+#define MTK_ETH_PATH_GMAC1_SGMII	BIT_ULL(MTK_ETH_PATH_GMAC1_SGMII_BIT)
-+#define MTK_ETH_PATH_GMAC2_RGMII	BIT_ULL(MTK_ETH_PATH_GMAC2_RGMII_BIT)
-+#define MTK_ETH_PATH_GMAC2_SGMII	BIT_ULL(MTK_ETH_PATH_GMAC2_SGMII_BIT)
-+#define MTK_ETH_PATH_GMAC2_GEPHY	BIT_ULL(MTK_ETH_PATH_GMAC2_GEPHY_BIT)
-+#define MTK_ETH_PATH_GDM1_ESW		BIT_ULL(MTK_ETH_PATH_GDM1_ESW_BIT)
- 
- #define MTK_GMAC1_RGMII		(MTK_ETH_PATH_GMAC1_RGMII | MTK_RGMII)
- #define MTK_GMAC1_TRGMII	(MTK_ETH_PATH_GMAC1_TRGMII | MTK_TRGMII)
-@@ -1045,7 +1045,7 @@ struct mtk_reg_map {
- struct mtk_soc_data {
- 	const struct mtk_reg_map *reg_map;
- 	u32             ana_rgc3;
--	u32		caps;
-+	u64		caps;
- 	u32		required_clks;
- 	bool		required_pctl;
- 	u8		offload_version;
diff --git a/target/linux/generic/backport-6.1/750-v6.5-10-net-ethernet-mtk_eth_soc-convert-clock-bitmap-to-u64.patch b/target/linux/generic/backport-6.1/750-v6.5-10-net-ethernet-mtk_eth_soc-convert-clock-bitmap-to-u64.patch
deleted file mode 100644
index 5947d385f256..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-10-net-ethernet-mtk_eth_soc-convert-clock-bitmap-to-u64.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From a1c9f7d1d24e90294f6a6755b137fcf306851e93 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 25 Jul 2023 01:53:28 +0100
-Subject: [PATCH 104/250] net: ethernet: mtk_eth_soc: convert clock bitmap to
- u64
-
-The to-be-added MT7988 SoC adds many new clocks which need to be
-controlled by the Ethernet driver, which will result in their total
-number exceeding 32.
-Prepare by converting clock bitmaps into 64-bit types.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/6960a39bb0078cf84d7642a9558e6a91c6cc9df3.1690246066.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 96 +++++++++++----------
- 1 file changed, 49 insertions(+), 47 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -666,54 +666,56 @@ enum mtk_clks_map {
- 	MTK_CLK_MAX
- };
- 
--#define MT7623_CLKS_BITMAP	(BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) |  \
--				 BIT(MTK_CLK_GP1) | BIT(MTK_CLK_GP2) | \
--				 BIT(MTK_CLK_TRGPLL))
--#define MT7622_CLKS_BITMAP	(BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) |  \
--				 BIT(MTK_CLK_GP0) | BIT(MTK_CLK_GP1) | \
--				 BIT(MTK_CLK_GP2) | \
--				 BIT(MTK_CLK_SGMII_TX_250M) | \
--				 BIT(MTK_CLK_SGMII_RX_250M) | \
--				 BIT(MTK_CLK_SGMII_CDR_REF) | \
--				 BIT(MTK_CLK_SGMII_CDR_FB) | \
--				 BIT(MTK_CLK_SGMII_CK) | \
--				 BIT(MTK_CLK_ETH2PLL))
-+#define MT7623_CLKS_BITMAP	(BIT_ULL(MTK_CLK_ETHIF) | BIT_ULL(MTK_CLK_ESW) |  \
-+				 BIT_ULL(MTK_CLK_GP1) | BIT_ULL(MTK_CLK_GP2) | \
-+				 BIT_ULL(MTK_CLK_TRGPLL))
-+#define MT7622_CLKS_BITMAP	(BIT_ULL(MTK_CLK_ETHIF) | BIT_ULL(MTK_CLK_ESW) |  \
-+				 BIT_ULL(MTK_CLK_GP0) | BIT_ULL(MTK_CLK_GP1) | \
-+				 BIT_ULL(MTK_CLK_GP2) | \
-+				 BIT_ULL(MTK_CLK_SGMII_TX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII_RX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CDR_REF) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CDR_FB) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CK) | \
-+				 BIT_ULL(MTK_CLK_ETH2PLL))
- #define MT7621_CLKS_BITMAP	(0)
- #define MT7628_CLKS_BITMAP	(0)
--#define MT7629_CLKS_BITMAP	(BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) |  \
--				 BIT(MTK_CLK_GP0) | BIT(MTK_CLK_GP1) | \
--				 BIT(MTK_CLK_GP2) | BIT(MTK_CLK_FE) | \
--				 BIT(MTK_CLK_SGMII_TX_250M) | \
--				 BIT(MTK_CLK_SGMII_RX_250M) | \
--				 BIT(MTK_CLK_SGMII_CDR_REF) | \
--				 BIT(MTK_CLK_SGMII_CDR_FB) | \
--				 BIT(MTK_CLK_SGMII2_TX_250M) | \
--				 BIT(MTK_CLK_SGMII2_RX_250M) | \
--				 BIT(MTK_CLK_SGMII2_CDR_REF) | \
--				 BIT(MTK_CLK_SGMII2_CDR_FB) | \
--				 BIT(MTK_CLK_SGMII_CK) | \
--				 BIT(MTK_CLK_ETH2PLL) | BIT(MTK_CLK_SGMIITOP))
--#define MT7981_CLKS_BITMAP	(BIT(MTK_CLK_FE) | BIT(MTK_CLK_GP2) | BIT(MTK_CLK_GP1) | \
--				 BIT(MTK_CLK_WOCPU0) | \
--				 BIT(MTK_CLK_SGMII_TX_250M) | \
--				 BIT(MTK_CLK_SGMII_RX_250M) | \
--				 BIT(MTK_CLK_SGMII_CDR_REF) | \
--				 BIT(MTK_CLK_SGMII_CDR_FB) | \
--				 BIT(MTK_CLK_SGMII2_TX_250M) | \
--				 BIT(MTK_CLK_SGMII2_RX_250M) | \
--				 BIT(MTK_CLK_SGMII2_CDR_REF) | \
--				 BIT(MTK_CLK_SGMII2_CDR_FB) | \
--				 BIT(MTK_CLK_SGMII_CK))
--#define MT7986_CLKS_BITMAP	(BIT(MTK_CLK_FE) | BIT(MTK_CLK_GP2) | BIT(MTK_CLK_GP1) | \
--				 BIT(MTK_CLK_WOCPU1) | BIT(MTK_CLK_WOCPU0) | \
--				 BIT(MTK_CLK_SGMII_TX_250M) | \
--				 BIT(MTK_CLK_SGMII_RX_250M) | \
--				 BIT(MTK_CLK_SGMII_CDR_REF) | \
--				 BIT(MTK_CLK_SGMII_CDR_FB) | \
--				 BIT(MTK_CLK_SGMII2_TX_250M) | \
--				 BIT(MTK_CLK_SGMII2_RX_250M) | \
--				 BIT(MTK_CLK_SGMII2_CDR_REF) | \
--				 BIT(MTK_CLK_SGMII2_CDR_FB))
-+#define MT7629_CLKS_BITMAP	(BIT_ULL(MTK_CLK_ETHIF) | BIT_ULL(MTK_CLK_ESW) |  \
-+				 BIT_ULL(MTK_CLK_GP0) | BIT_ULL(MTK_CLK_GP1) | \
-+				 BIT_ULL(MTK_CLK_GP2) | BIT_ULL(MTK_CLK_FE) | \
-+				 BIT_ULL(MTK_CLK_SGMII_TX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII_RX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CDR_REF) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CDR_FB) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_CDR_REF) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_CDR_FB) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CK) | \
-+				 BIT_ULL(MTK_CLK_ETH2PLL) | BIT_ULL(MTK_CLK_SGMIITOP))
-+#define MT7981_CLKS_BITMAP	(BIT_ULL(MTK_CLK_FE) | BIT_ULL(MTK_CLK_GP2) | \
-+				 BIT_ULL(MTK_CLK_GP1) | \
-+				 BIT_ULL(MTK_CLK_WOCPU0) | \
-+				 BIT_ULL(MTK_CLK_SGMII_TX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII_RX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CDR_REF) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CDR_FB) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_CDR_REF) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_CDR_FB) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CK))
-+#define MT7986_CLKS_BITMAP	(BIT_ULL(MTK_CLK_FE) | BIT_ULL(MTK_CLK_GP2) | \
-+				 BIT_ULL(MTK_CLK_GP1) | \
-+				 BIT_ULL(MTK_CLK_WOCPU1) | BIT_ULL(MTK_CLK_WOCPU0) | \
-+				 BIT_ULL(MTK_CLK_SGMII_TX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII_RX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CDR_REF) | \
-+				 BIT_ULL(MTK_CLK_SGMII_CDR_FB) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_CDR_REF) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_CDR_FB))
- 
- enum mtk_dev_state {
- 	MTK_HW_INIT,
-@@ -1046,7 +1048,7 @@ struct mtk_soc_data {
- 	const struct mtk_reg_map *reg_map;
- 	u32             ana_rgc3;
- 	u64		caps;
--	u32		required_clks;
-+	u64		required_clks;
- 	bool		required_pctl;
- 	u8		offload_version;
- 	u8		hash_offset;
diff --git a/target/linux/generic/backport-6.1/750-v6.5-11-net-ethernet-mtk_eth_soc-add-basic-support-for-MT798.patch b/target/linux/generic/backport-6.1/750-v6.5-11-net-ethernet-mtk_eth_soc-add-basic-support-for-MT798.patch
deleted file mode 100644
index 8b1493ce1440..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-11-net-ethernet-mtk_eth_soc-add-basic-support-for-MT798.patch
+++ /dev/null
@@ -1,477 +0,0 @@
-From 94f825a7eadfc8b4c8828efdb7705d9703f9c73e Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Tue, 25 Jul 2023 01:57:42 +0100
-Subject: [PATCH 105/250] net: ethernet: mtk_eth_soc: add basic support for
- MT7988 SoC
-
-Introduce support for ethernet chip available in MT7988 SoC to
-mtk_eth_soc driver. As a first step support only the first GMAC which
-is hard-wired to the internal DSA switch having 4 built-in gigabit
-Ethernet PHYs.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/25c8377095b95d186872eeda7aa055da83e8f0ca.1690246605.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_path.c |  14 +-
- drivers/net/ethernet/mediatek/mtk_eth_soc.c  | 201 +++++++++++++++++--
- drivers/net/ethernet/mediatek/mtk_eth_soc.h  |  86 +++++++-
- 3 files changed, 273 insertions(+), 28 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_path.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_path.c
-@@ -43,7 +43,7 @@ static const char *mtk_eth_path_name(u64
- static int set_mux_gdm1_to_gmac1_esw(struct mtk_eth *eth, u64 path)
- {
- 	bool updated = true;
--	u32 val, mask, set;
-+	u32 mask, set, reg;
- 
- 	switch (path) {
- 	case MTK_ETH_PATH_GMAC1_SGMII:
-@@ -59,11 +59,13 @@ static int set_mux_gdm1_to_gmac1_esw(str
- 		break;
- 	}
- 
--	if (updated) {
--		val = mtk_r32(eth, MTK_MAC_MISC);
--		val = (val & mask) | set;
--		mtk_w32(eth, val, MTK_MAC_MISC);
--	}
-+	if (mtk_is_netsys_v3_or_greater(eth))
-+		reg = MTK_MAC_MISC_V3;
-+	else
-+		reg = MTK_MAC_MISC;
-+
-+	if (updated)
-+		mtk_m32(eth, mask, set, reg);
- 
- 	dev_dbg(eth->dev, "path %s in %s updated = %d\n",
- 		mtk_eth_path_name(path), __func__, updated);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -152,6 +152,54 @@ static const struct mtk_reg_map mt7986_r
- 	.pse_oq_sta		= 0x01a0,
- };
- 
-+static const struct mtk_reg_map mt7988_reg_map = {
-+	.tx_irq_mask		= 0x461c,
-+	.tx_irq_status		= 0x4618,
-+	.pdma = {
-+		.rx_ptr		= 0x6900,
-+		.rx_cnt_cfg	= 0x6904,
-+		.pcrx_ptr	= 0x6908,
-+		.glo_cfg	= 0x6a04,
-+		.rst_idx	= 0x6a08,
-+		.delay_irq	= 0x6a0c,
-+		.irq_status	= 0x6a20,
-+		.irq_mask	= 0x6a28,
-+		.adma_rx_dbg0	= 0x6a38,
-+		.int_grp	= 0x6a50,
-+	},
-+	.qdma = {
-+		.qtx_cfg	= 0x4400,
-+		.qtx_sch	= 0x4404,
-+		.rx_ptr		= 0x4500,
-+		.rx_cnt_cfg	= 0x4504,
-+		.qcrx_ptr	= 0x4508,
-+		.glo_cfg	= 0x4604,
-+		.rst_idx	= 0x4608,
-+		.delay_irq	= 0x460c,
-+		.fc_th		= 0x4610,
-+		.int_grp	= 0x4620,
-+		.hred		= 0x4644,
-+		.ctx_ptr	= 0x4700,
-+		.dtx_ptr	= 0x4704,
-+		.crx_ptr	= 0x4710,
-+		.drx_ptr	= 0x4714,
-+		.fq_head	= 0x4720,
-+		.fq_tail	= 0x4724,
-+		.fq_count	= 0x4728,
-+		.fq_blen	= 0x472c,
-+		.tx_sch_rate	= 0x4798,
-+	},
-+	.gdm1_cnt		= 0x1c00,
-+	.gdma_to_ppe		= 0x3333,
-+	.ppe_base		= 0x2000,
-+	.wdma_base = {
-+		[0]		= 0x4800,
-+		[1]		= 0x4c00,
-+	},
-+	.pse_iq_sta		= 0x0180,
-+	.pse_oq_sta		= 0x01a0,
-+};
-+
- /* strings used by ethtool */
- static const struct mtk_ethtool_stats {
- 	char str[ETH_GSTRING_LEN];
-@@ -179,10 +227,54 @@ static const struct mtk_ethtool_stats {
- };
- 
- static const char * const mtk_clks_source_name[] = {
--	"ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "trgpll",
--	"sgmii_tx250m", "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb",
--	"sgmii2_tx250m", "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb",
--	"sgmii_ck", "eth2pll", "wocpu0", "wocpu1", "netsys0", "netsys1"
-+	"ethif",
-+	"sgmiitop",
-+	"esw",
-+	"gp0",
-+	"gp1",
-+	"gp2",
-+	"gp3",
-+	"xgp1",
-+	"xgp2",
-+	"xgp3",
-+	"crypto",
-+	"fe",
-+	"trgpll",
-+	"sgmii_tx250m",
-+	"sgmii_rx250m",
-+	"sgmii_cdr_ref",
-+	"sgmii_cdr_fb",
-+	"sgmii2_tx250m",
-+	"sgmii2_rx250m",
-+	"sgmii2_cdr_ref",
-+	"sgmii2_cdr_fb",
-+	"sgmii_ck",
-+	"eth2pll",
-+	"wocpu0",
-+	"wocpu1",
-+	"netsys0",
-+	"netsys1",
-+	"ethwarp_wocpu2",
-+	"ethwarp_wocpu1",
-+	"ethwarp_wocpu0",
-+	"top_usxgmii0_sel",
-+	"top_usxgmii1_sel",
-+	"top_sgm0_sel",
-+	"top_sgm1_sel",
-+	"top_xfi_phy0_xtal_sel",
-+	"top_xfi_phy1_xtal_sel",
-+	"top_eth_gmii_sel",
-+	"top_eth_refck_50m_sel",
-+	"top_eth_sys_200m_sel",
-+	"top_eth_sys_sel",
-+	"top_eth_xgmii_sel",
-+	"top_eth_mii_sel",
-+	"top_netsys_sel",
-+	"top_netsys_500m_sel",
-+	"top_netsys_pao_2x_sel",
-+	"top_netsys_sync_250m_sel",
-+	"top_netsys_ppefb_250m_sel",
-+	"top_netsys_warp_sel",
- };
- 
- void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg)
-@@ -195,7 +287,7 @@ u32 mtk_r32(struct mtk_eth *eth, unsigne
- 	return __raw_readl(eth->base + reg);
- }
- 
--static u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned reg)
-+u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned int reg)
- {
- 	u32 val;
- 
-@@ -369,6 +461,19 @@ static void mtk_gmac0_rgmii_adjust(struc
- 	dev_err(eth->dev, "Missing PLL configuration, ethernet may not work\n");
- }
- 
-+static void mtk_setup_bridge_switch(struct mtk_eth *eth)
-+{
-+	/* Force Port1 XGMAC Link Up */
-+	mtk_m32(eth, 0, MTK_XGMAC_FORCE_LINK(MTK_GMAC1_ID),
-+		MTK_XGMAC_STS(MTK_GMAC1_ID));
-+
-+	/* Adjust GSW bridge IPG to 11 */
-+	mtk_m32(eth, GSWTX_IPG_MASK | GSWRX_IPG_MASK,
-+		(GSW_IPG_11 << GSWTX_IPG_SHIFT) |
-+		(GSW_IPG_11 << GSWRX_IPG_SHIFT),
-+		MTK_GSW_CFG);
-+}
-+
- static struct phylink_pcs *mtk_mac_select_pcs(struct phylink_config *config,
- 					      phy_interface_t interface)
- {
-@@ -438,6 +543,8 @@ static void mtk_mac_config(struct phylin
- 					goto init_err;
- 			}
- 			break;
-+		case PHY_INTERFACE_MODE_INTERNAL:
-+			break;
- 		default:
- 			goto err_phy;
- 		}
-@@ -515,6 +622,15 @@ static void mtk_mac_config(struct phylin
- 		return;
- 	}
- 
-+	/* Setup gmac */
-+	if (mtk_is_netsys_v3_or_greater(eth) &&
-+	    mac->interface == PHY_INTERFACE_MODE_INTERNAL) {
-+		mtk_w32(mac->hw, MTK_GDMA_XGDM_SEL, MTK_GDMA_EG_CTRL(mac->id));
-+		mtk_w32(mac->hw, MAC_MCR_FORCE_LINK_DOWN, MTK_MAC_MCR(mac->id));
-+
-+		mtk_setup_bridge_switch(eth);
-+	}
-+
- 	return;
- 
- err_phy:
-@@ -724,11 +840,15 @@ static int mtk_mdio_init(struct mtk_eth
- 	}
- 	divider = min_t(unsigned int, DIV_ROUND_UP(MDC_MAX_FREQ, max_clk), 63);
- 
-+	/* Configure MDC Turbo Mode */
-+	if (mtk_is_netsys_v3_or_greater(eth))
-+		mtk_m32(eth, 0, MISC_MDC_TURBO, MTK_MAC_MISC_V3);
-+
- 	/* Configure MDC Divider */
--	val = mtk_r32(eth, MTK_PPSC);
--	val &= ~PPSC_MDC_CFG;
--	val |= FIELD_PREP(PPSC_MDC_CFG, divider) | PPSC_MDC_TURBO;
--	mtk_w32(eth, val, MTK_PPSC);
-+	val = FIELD_PREP(PPSC_MDC_CFG, divider);
-+	if (!mtk_is_netsys_v3_or_greater(eth))
-+		val |= PPSC_MDC_TURBO;
-+	mtk_m32(eth, PPSC_MDC_CFG, val, MTK_PPSC);
- 
- 	dev_dbg(eth->dev, "MDC is running on %d Hz\n", MDC_MAX_FREQ / divider);
- 
-@@ -1189,10 +1309,19 @@ static void mtk_tx_set_dma_desc_v2(struc
- 		data |= TX_DMA_LS0;
- 	WRITE_ONCE(desc->txd3, data);
- 
--	if (mac->id == MTK_GMAC3_ID)
--		data = PSE_GDM3_PORT;
--	else
--		data = (mac->id + 1) << TX_DMA_FPORT_SHIFT_V2; /* forward port */
-+	 /* set forward port */
-+	switch (mac->id) {
-+	case MTK_GMAC1_ID:
-+		data = PSE_GDM1_PORT << TX_DMA_FPORT_SHIFT_V2;
-+		break;
-+	case MTK_GMAC2_ID:
-+		data = PSE_GDM2_PORT << TX_DMA_FPORT_SHIFT_V2;
-+		break;
-+	case MTK_GMAC3_ID:
-+		data = PSE_GDM3_PORT << TX_DMA_FPORT_SHIFT_V2;
-+		break;
-+	}
-+
- 	data |= TX_DMA_SWC_V2 | QID_BITS_V2(info->qid);
- 	WRITE_ONCE(desc->txd4, data);
- 
-@@ -4359,6 +4488,17 @@ static int mtk_add_mac(struct mtk_eth *e
- 			  mac->phylink_config.supported_interfaces);
- 	}
- 
-+	if (mtk_is_netsys_v3_or_greater(mac->hw) &&
-+	    MTK_HAS_CAPS(mac->hw->soc->caps, MTK_ESW_BIT) &&
-+	    id == MTK_GMAC1_ID) {
-+		mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE |
-+						       MAC_SYM_PAUSE |
-+						       MAC_10000FD;
-+		phy_interface_zero(mac->phylink_config.supported_interfaces);
-+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
-+			  mac->phylink_config.supported_interfaces);
-+	}
-+
- 	phylink = phylink_create(&mac->phylink_config,
- 				 of_fwnode_handle(mac->of_node),
- 				 phy_mode, &mtk_phylink_ops);
-@@ -4879,6 +5019,24 @@ static const struct mtk_soc_data mt7986_
- 	},
- };
- 
-+static const struct mtk_soc_data mt7988_data = {
-+	.reg_map = &mt7988_reg_map,
-+	.ana_rgc3 = 0x128,
-+	.caps = MT7988_CAPS,
-+	.hw_features = MTK_HW_FEATURES,
-+	.required_clks = MT7988_CLKS_BITMAP,
-+	.required_pctl = false,
-+	.version = 3,
-+	.txrx = {
-+		.txd_size = sizeof(struct mtk_tx_dma_v2),
-+		.rxd_size = sizeof(struct mtk_rx_dma_v2),
-+		.rx_irq_done_mask = MTK_RX_DONE_INT_V2,
-+		.rx_dma_l4_valid = RX_DMA_L4_VALID_V2,
-+		.dma_max_len = MTK_TX_DMA_BUF_LEN_V2,
-+		.dma_len_offset = 8,
-+	},
-+};
-+
- static const struct mtk_soc_data rt5350_data = {
- 	.reg_map = &mt7628_reg_map,
- 	.caps = MT7628_CAPS,
-@@ -4897,14 +5055,15 @@ static const struct mtk_soc_data rt5350_
- };
- 
- const struct of_device_id of_mtk_match[] = {
--	{ .compatible = "mediatek,mt2701-eth", .data = &mt2701_data},
--	{ .compatible = "mediatek,mt7621-eth", .data = &mt7621_data},
--	{ .compatible = "mediatek,mt7622-eth", .data = &mt7622_data},
--	{ .compatible = "mediatek,mt7623-eth", .data = &mt7623_data},
--	{ .compatible = "mediatek,mt7629-eth", .data = &mt7629_data},
--	{ .compatible = "mediatek,mt7981-eth", .data = &mt7981_data},
--	{ .compatible = "mediatek,mt7986-eth", .data = &mt7986_data},
--	{ .compatible = "ralink,rt5350-eth", .data = &rt5350_data},
-+	{ .compatible = "mediatek,mt2701-eth", .data = &mt2701_data },
-+	{ .compatible = "mediatek,mt7621-eth", .data = &mt7621_data },
-+	{ .compatible = "mediatek,mt7622-eth", .data = &mt7622_data },
-+	{ .compatible = "mediatek,mt7623-eth", .data = &mt7623_data },
-+	{ .compatible = "mediatek,mt7629-eth", .data = &mt7629_data },
-+	{ .compatible = "mediatek,mt7981-eth", .data = &mt7981_data },
-+	{ .compatible = "mediatek,mt7986-eth", .data = &mt7986_data },
-+	{ .compatible = "mediatek,mt7988-eth", .data = &mt7988_data },
-+	{ .compatible = "ralink,rt5350-eth", .data = &rt5350_data },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, of_mtk_match);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -117,7 +117,8 @@
- #define MTK_CDMP_EG_CTRL	0x404
- 
- /* GDM Exgress Control Register */
--#define MTK_GDMA_FWD_CFG(x)	(0x500 + (x * 0x1000))
-+#define MTK_GDMA_FWD_CFG(x)	({ typeof(x) _x = (x); (_x == MTK_GMAC3_ID) ?	\
-+				   0x540 : 0x500 + (_x * 0x1000); })
- #define MTK_GDMA_SPECIAL_TAG	BIT(24)
- #define MTK_GDMA_ICS_EN		BIT(22)
- #define MTK_GDMA_TCS_EN		BIT(21)
-@@ -126,6 +127,11 @@
- #define MTK_GDMA_TO_PDMA	0x0
- #define MTK_GDMA_DROP_ALL       0x7777
- 
-+/* GDM Egress Control Register */
-+#define MTK_GDMA_EG_CTRL(x)	({ typeof(x) _x = (x); (_x == MTK_GMAC3_ID) ?	\
-+				   0x544 : 0x504 + (_x * 0x1000); })
-+#define MTK_GDMA_XGDM_SEL	BIT(31)
-+
- /* Unicast Filter MAC Address Register - Low */
- #define MTK_GDMA_MAC_ADRL(x)	(0x508 + (x * 0x1000))
- 
-@@ -389,7 +395,26 @@
- #define PHY_IAC_TIMEOUT		HZ
- 
- #define MTK_MAC_MISC		0x1000c
-+#define MTK_MAC_MISC_V3		0x10010
- #define MTK_MUX_TO_ESW		BIT(0)
-+#define MISC_MDC_TURBO		BIT(4)
-+
-+/* XMAC status registers */
-+#define MTK_XGMAC_STS(x)	(((x) == MTK_GMAC3_ID) ? 0x1001C : 0x1000C)
-+#define MTK_XGMAC_FORCE_LINK(x)	(((x) == MTK_GMAC2_ID) ? BIT(31) : BIT(15))
-+#define MTK_USXGMII_PCS_LINK	BIT(8)
-+#define MTK_XGMAC_RX_FC		BIT(5)
-+#define MTK_XGMAC_TX_FC		BIT(4)
-+#define MTK_USXGMII_PCS_MODE	GENMASK(3, 1)
-+#define MTK_XGMAC_LINK_STS	BIT(0)
-+
-+/* GSW bridge registers */
-+#define MTK_GSW_CFG		(0x10080)
-+#define GSWTX_IPG_MASK		GENMASK(19, 16)
-+#define GSWTX_IPG_SHIFT		16
-+#define GSWRX_IPG_MASK		GENMASK(3, 0)
-+#define GSWRX_IPG_SHIFT		0
-+#define GSW_IPG_11		11
- 
- /* Mac control registers */
- #define MTK_MAC_MCR(x)		(0x10100 + (x * 0x100))
-@@ -647,6 +672,11 @@ enum mtk_clks_map {
- 	MTK_CLK_GP0,
- 	MTK_CLK_GP1,
- 	MTK_CLK_GP2,
-+	MTK_CLK_GP3,
-+	MTK_CLK_XGP1,
-+	MTK_CLK_XGP2,
-+	MTK_CLK_XGP3,
-+	MTK_CLK_CRYPTO,
- 	MTK_CLK_FE,
- 	MTK_CLK_TRGPLL,
- 	MTK_CLK_SGMII_TX_250M,
-@@ -663,6 +693,27 @@ enum mtk_clks_map {
- 	MTK_CLK_WOCPU1,
- 	MTK_CLK_NETSYS0,
- 	MTK_CLK_NETSYS1,
-+	MTK_CLK_ETHWARP_WOCPU2,
-+	MTK_CLK_ETHWARP_WOCPU1,
-+	MTK_CLK_ETHWARP_WOCPU0,
-+	MTK_CLK_TOP_USXGMII_SBUS_0_SEL,
-+	MTK_CLK_TOP_USXGMII_SBUS_1_SEL,
-+	MTK_CLK_TOP_SGM_0_SEL,
-+	MTK_CLK_TOP_SGM_1_SEL,
-+	MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL,
-+	MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL,
-+	MTK_CLK_TOP_ETH_GMII_SEL,
-+	MTK_CLK_TOP_ETH_REFCK_50M_SEL,
-+	MTK_CLK_TOP_ETH_SYS_200M_SEL,
-+	MTK_CLK_TOP_ETH_SYS_SEL,
-+	MTK_CLK_TOP_ETH_XGMII_SEL,
-+	MTK_CLK_TOP_ETH_MII_SEL,
-+	MTK_CLK_TOP_NETSYS_SEL,
-+	MTK_CLK_TOP_NETSYS_500M_SEL,
-+	MTK_CLK_TOP_NETSYS_PAO_2X_SEL,
-+	MTK_CLK_TOP_NETSYS_SYNC_250M_SEL,
-+	MTK_CLK_TOP_NETSYS_PPEFB_250M_SEL,
-+	MTK_CLK_TOP_NETSYS_WARP_SEL,
- 	MTK_CLK_MAX
- };
- 
-@@ -716,6 +767,36 @@ enum mtk_clks_map {
- 				 BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \
- 				 BIT_ULL(MTK_CLK_SGMII2_CDR_REF) | \
- 				 BIT_ULL(MTK_CLK_SGMII2_CDR_FB))
-+#define MT7988_CLKS_BITMAP	(BIT_ULL(MTK_CLK_FE) | BIT_ULL(MTK_CLK_ESW) | \
-+				 BIT_ULL(MTK_CLK_GP1) | BIT_ULL(MTK_CLK_GP2) | \
-+				 BIT_ULL(MTK_CLK_GP3) | BIT_ULL(MTK_CLK_XGP1) | \
-+				 BIT_ULL(MTK_CLK_XGP2) | BIT_ULL(MTK_CLK_XGP3) | \
-+				 BIT_ULL(MTK_CLK_CRYPTO) | \
-+				 BIT_ULL(MTK_CLK_SGMII_TX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII_RX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \
-+				 BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \
-+				 BIT_ULL(MTK_CLK_ETHWARP_WOCPU2) | \
-+				 BIT_ULL(MTK_CLK_ETHWARP_WOCPU1) | \
-+				 BIT_ULL(MTK_CLK_ETHWARP_WOCPU0) | \
-+				 BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_0_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_1_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_SGM_0_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_SGM_1_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_ETH_GMII_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_ETH_REFCK_50M_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_ETH_SYS_200M_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_ETH_SYS_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_ETH_XGMII_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_ETH_MII_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_NETSYS_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_NETSYS_500M_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_NETSYS_PAO_2X_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_NETSYS_SYNC_250M_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_NETSYS_PPEFB_250M_SEL) | \
-+				 BIT_ULL(MTK_CLK_TOP_NETSYS_WARP_SEL))
- 
- enum mtk_dev_state {
- 	MTK_HW_INIT,
-@@ -964,6 +1045,8 @@ enum mkt_eth_capabilities {
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
- 		      MTK_RSTCTRL_PPE1)
- 
-+#define MT7988_CAPS  (MTK_GDM1_ESW | MTK_QDMA | MTK_RSTCTRL_PPE1)
-+
- struct mtk_tx_dma_desc_info {
- 	dma_addr_t	addr;
- 	u32		size;
-@@ -1309,6 +1392,7 @@ void mtk_stats_update_mac(struct mtk_mac
- 
- void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg);
- u32 mtk_r32(struct mtk_eth *eth, unsigned reg);
-+u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned int reg);
- 
- int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id);
- int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id);
diff --git a/target/linux/generic/backport-6.1/750-v6.5-12-net-ethernet-mtk_eth_soc-enable-page_pool-support-fo.patch b/target/linux/generic/backport-6.1/750-v6.5-12-net-ethernet-mtk_eth_soc-enable-page_pool-support-fo.patch
deleted file mode 100644
index bb48dadec0f4..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-12-net-ethernet-mtk_eth_soc-enable-page_pool-support-fo.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 38a7eb76220731eff40602cf433f24880be0a6c2 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 27 Jul 2023 09:02:26 +0200
-Subject: [PATCH 106/250] net: ethernet: mtk_eth_soc: enable page_pool support
- for MT7988 SoC
-
-In order to recycle pages, enable page_pool allocator for MT7988 SoC.
-
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Link: https://lore.kernel.org/r/fd4e8693980e47385a543e7b002eec0b88bd09df.1690440675.git.lorenzo@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1657,7 +1657,7 @@ static void mtk_update_rx_cpu_idx(struct
- 
- static bool mtk_page_pool_enabled(struct mtk_eth *eth)
- {
--	return eth->soc->version == 2;
-+	return mtk_is_netsys_v2_or_greater(eth);
- }
- 
- static struct page_pool *mtk_create_page_pool(struct mtk_eth *eth,
diff --git a/target/linux/generic/backport-6.1/750-v6.5-13-net-ethernet-mtk_eth_soc-enable-nft-hw-flowtable_off.patch b/target/linux/generic/backport-6.1/750-v6.5-13-net-ethernet-mtk_eth_soc-enable-nft-hw-flowtable_off.patch
deleted file mode 100644
index bb8deb9846e0..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-13-net-ethernet-mtk_eth_soc-enable-nft-hw-flowtable_off.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 199e7d5a7f03dd377f3a7a458360dbedd71d50ba Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Thu, 27 Jul 2023 09:07:28 +0200
-Subject: [PATCH 107/250] net: ethernet: mtk_eth_soc: enable nft hw
- flowtable_offload for MT7988 SoC
-
-Enable hw Packet Process Engine (PPE) for MT7988 SoC.
-
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Link: https://lore.kernel.org/r/5e86341b0220a49620dadc02d77970de5ded9efc.1690441576.git.lorenzo@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c |  3 +++
- drivers/net/ethernet/mediatek/mtk_ppe.c     | 19 +++++++++++++++----
- drivers/net/ethernet/mediatek/mtk_ppe.h     | 19 ++++++++++++++++++-
- 3 files changed, 36 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -5027,6 +5027,9 @@ static const struct mtk_soc_data mt7988_
- 	.required_clks = MT7988_CLKS_BITMAP,
- 	.required_pctl = false,
- 	.version = 3,
-+	.offload_version = 2,
-+	.hash_offset = 4,
-+	.foe_entry_size = MTK_FOE_ENTRY_V3_SIZE,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma_v2),
- 		.rxd_size = sizeof(struct mtk_rx_dma_v2),
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -422,13 +422,22 @@ int mtk_foe_entry_set_wdma(struct mtk_et
- 	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(eth, entry);
- 	u32 *ib2 = mtk_foe_entry_ib2(eth, entry);
- 
--	if (mtk_is_netsys_v2_or_greater(eth)) {
-+	switch (eth->soc->version) {
-+	case 3:
-+		*ib2 &= ~MTK_FOE_IB2_PORT_MG_V2;
-+		*ib2 |=  FIELD_PREP(MTK_FOE_IB2_RX_IDX, txq) |
-+			 MTK_FOE_IB2_WDMA_WINFO_V2;
-+		l2->w3info = FIELD_PREP(MTK_FOE_WINFO_WCID_V3, wcid) |
-+			     FIELD_PREP(MTK_FOE_WINFO_BSS_V3, bss);
-+		break;
-+	case 2:
- 		*ib2 &= ~MTK_FOE_IB2_PORT_MG_V2;
- 		*ib2 |=  FIELD_PREP(MTK_FOE_IB2_RX_IDX, txq) |
- 			 MTK_FOE_IB2_WDMA_WINFO_V2;
- 		l2->winfo = FIELD_PREP(MTK_FOE_WINFO_WCID, wcid) |
- 			    FIELD_PREP(MTK_FOE_WINFO_BSS, bss);
--	} else {
-+		break;
-+	default:
- 		*ib2 &= ~MTK_FOE_IB2_PORT_MG;
- 		*ib2 |= MTK_FOE_IB2_WDMA_WINFO;
- 		if (wdma_idx)
-@@ -436,6 +445,7 @@ int mtk_foe_entry_set_wdma(struct mtk_et
- 		l2->vlan2 = FIELD_PREP(MTK_FOE_VLAN2_WINFO_BSS, bss) |
- 			    FIELD_PREP(MTK_FOE_VLAN2_WINFO_WCID, wcid) |
- 			    FIELD_PREP(MTK_FOE_VLAN2_WINFO_RING, txq);
-+		break;
- 	}
- 
- 	return 0;
-@@ -950,8 +960,7 @@ void mtk_ppe_start(struct mtk_ppe *ppe)
- 	mtk_ppe_init_foe_table(ppe);
- 	ppe_w32(ppe, MTK_PPE_TB_BASE, ppe->foe_phys);
- 
--	val = MTK_PPE_TB_CFG_ENTRY_80B |
--	      MTK_PPE_TB_CFG_AGE_NON_L4 |
-+	val = MTK_PPE_TB_CFG_AGE_NON_L4 |
- 	      MTK_PPE_TB_CFG_AGE_UNBIND |
- 	      MTK_PPE_TB_CFG_AGE_TCP |
- 	      MTK_PPE_TB_CFG_AGE_UDP |
-@@ -967,6 +976,8 @@ void mtk_ppe_start(struct mtk_ppe *ppe)
- 			 MTK_PPE_ENTRIES_SHIFT);
- 	if (mtk_is_netsys_v2_or_greater(ppe->eth))
- 		val |= MTK_PPE_TB_CFG_INFO_SEL;
-+	if (!mtk_is_netsys_v3_or_greater(ppe->eth))
-+		val |= MTK_PPE_TB_CFG_ENTRY_80B;
- 	ppe_w32(ppe, MTK_PPE_TB_CFG, val);
- 
- 	ppe_w32(ppe, MTK_PPE_IP_PROTO_CHK,
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -85,6 +85,17 @@ enum {
- #define MTK_FOE_WINFO_BSS		GENMASK(5, 0)
- #define MTK_FOE_WINFO_WCID		GENMASK(15, 6)
- 
-+#define MTK_FOE_WINFO_BSS_V3		GENMASK(23, 16)
-+#define MTK_FOE_WINFO_WCID_V3		GENMASK(15, 0)
-+
-+#define MTK_FOE_WINFO_PAO_USR_INFO	GENMASK(15, 0)
-+#define MTK_FOE_WINFO_PAO_TID		GENMASK(19, 16)
-+#define MTK_FOE_WINFO_PAO_IS_FIXEDRATE	BIT(20)
-+#define MTK_FOE_WINFO_PAO_IS_PRIOR	BIT(21)
-+#define MTK_FOE_WINFO_PAO_IS_SP		BIT(22)
-+#define MTK_FOE_WINFO_PAO_HF		BIT(23)
-+#define MTK_FOE_WINFO_PAO_AMSDU_EN	BIT(24)
-+
- enum {
- 	MTK_FOE_STATE_INVALID,
- 	MTK_FOE_STATE_UNBIND,
-@@ -106,8 +117,13 @@ struct mtk_foe_mac_info {
- 	u16 pppoe_id;
- 	u16 src_mac_lo;
- 
-+	/* netsys_v2 */
- 	u16 minfo;
- 	u16 winfo;
-+
-+	/* netsys_v3 */
-+	u32 w3info;
-+	u32 wpao;
- };
- 
- /* software-only entry type */
-@@ -218,6 +234,7 @@ struct mtk_foe_ipv6_6rd {
- 
- #define MTK_FOE_ENTRY_V1_SIZE	80
- #define MTK_FOE_ENTRY_V2_SIZE	96
-+#define MTK_FOE_ENTRY_V3_SIZE	128
- 
- struct mtk_foe_entry {
- 	u32 ib1;
-@@ -228,7 +245,7 @@ struct mtk_foe_entry {
- 		struct mtk_foe_ipv4_dslite dslite;
- 		struct mtk_foe_ipv6 ipv6;
- 		struct mtk_foe_ipv6_6rd ipv6_6rd;
--		u32 data[23];
-+		u32 data[31];
- 	};
- };
- 
diff --git a/target/linux/generic/backport-6.1/750-v6.5-14-net-ethernet-mtk_eth_soc-support-per-flow-accounting.patch b/target/linux/generic/backport-6.1/750-v6.5-14-net-ethernet-mtk_eth_soc-support-per-flow-accounting.patch
deleted file mode 100644
index c985b6a9c7c8..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-14-net-ethernet-mtk_eth_soc-support-per-flow-accounting.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 0c024632c1e7ff69914329bfd87bec749b9c0aed Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 2 Aug 2023 04:31:09 +0100
-Subject: [PATCH 108/250] net: ethernet: mtk_eth_soc: support per-flow
- accounting on MT7988
-
-NETSYS_V3 uses 64 bits for each counters while older SoCs are using
-48/40 bits for each counter.
-Support reading per-flow byte and package counters on NETSYS_V3.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Link: https://lore.kernel.org/r/37a0928fa8c1253b197884c68ce1f54239421ac5.1690946442.git.daniel@makrotopia.org
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c  |  1 +
- drivers/net/ethernet/mediatek/mtk_ppe.c      | 21 +++++++++++++-------
- drivers/net/ethernet/mediatek/mtk_ppe_regs.h |  2 ++
- 3 files changed, 17 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -5029,6 +5029,7 @@ static const struct mtk_soc_data mt7988_
- 	.version = 3,
- 	.offload_version = 2,
- 	.hash_offset = 4,
-+	.has_accounting = true,
- 	.foe_entry_size = MTK_FOE_ENTRY_V3_SIZE,
- 	.txrx = {
- 		.txd_size = sizeof(struct mtk_tx_dma_v2),
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -91,7 +91,6 @@ static int mtk_ppe_mib_wait_busy(struct
- 
- static int mtk_mib_entry_read(struct mtk_ppe *ppe, u16 index, u64 *bytes, u64 *packets)
- {
--	u32 byte_cnt_low, byte_cnt_high, pkt_cnt_low, pkt_cnt_high;
- 	u32 val, cnt_r0, cnt_r1, cnt_r2;
- 	int ret;
- 
-@@ -106,12 +105,20 @@ static int mtk_mib_entry_read(struct mtk
- 	cnt_r1 = readl(ppe->base + MTK_PPE_MIB_SER_R1);
- 	cnt_r2 = readl(ppe->base + MTK_PPE_MIB_SER_R2);
- 
--	byte_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R0_BYTE_CNT_LOW, cnt_r0);
--	byte_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R1_BYTE_CNT_HIGH, cnt_r1);
--	pkt_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R1_PKT_CNT_LOW, cnt_r1);
--	pkt_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R2_PKT_CNT_HIGH, cnt_r2);
--	*bytes = ((u64)byte_cnt_high << 32) | byte_cnt_low;
--	*packets = (pkt_cnt_high << 16) | pkt_cnt_low;
-+	if (mtk_is_netsys_v3_or_greater(ppe->eth)) {
-+		/* 64 bit for each counter */
-+		u32 cnt_r3 = readl(ppe->base + MTK_PPE_MIB_SER_R3);
-+		*bytes = ((u64)cnt_r1 << 32) | cnt_r0;
-+		*packets = ((u64)cnt_r3 << 32) | cnt_r2;
-+	} else {
-+		/* 48 bit byte counter, 40 bit packet counter */
-+		u32 byte_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R0_BYTE_CNT_LOW, cnt_r0);
-+		u32 byte_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R1_BYTE_CNT_HIGH, cnt_r1);
-+		u32 pkt_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R1_PKT_CNT_LOW, cnt_r1);
-+		u32 pkt_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R2_PKT_CNT_HIGH, cnt_r2);
-+		*bytes = ((u64)byte_cnt_high << 32) | byte_cnt_low;
-+		*packets = (pkt_cnt_high << 16) | pkt_cnt_low;
-+	}
- 
- 	return 0;
- }
---- a/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
-@@ -163,6 +163,8 @@ enum {
- #define MTK_PPE_MIB_SER_R2			0x348
- #define MTK_PPE_MIB_SER_R2_PKT_CNT_HIGH		GENMASK(23, 0)
- 
-+#define MTK_PPE_MIB_SER_R3			0x34c
-+
- #define MTK_PPE_MIB_CACHE_CTL			0x350
- #define MTK_PPE_MIB_CACHE_CTL_EN		BIT(0)
- #define MTK_PPE_MIB_CACHE_CTL_FLUSH		BIT(2)
diff --git a/target/linux/generic/backport-6.1/750-v6.5-15-net-ethernet-mtk_eth_soc-fix-NULL-pointer-on-hw-rese.patch b/target/linux/generic/backport-6.1/750-v6.5-15-net-ethernet-mtk_eth_soc-fix-NULL-pointer-on-hw-rese.patch
deleted file mode 100644
index 6f1639a5720a..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-15-net-ethernet-mtk_eth_soc-fix-NULL-pointer-on-hw-rese.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 3b12f42772c26869d60398c1710aa27b27cd945c Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 21 Aug 2023 17:12:44 +0100
-Subject: [PATCH 109/250] net: ethernet: mtk_eth_soc: fix NULL pointer on hw
- reset
-
-When a hardware reset is triggered on devices not initializing WED the
-calls to mtk_wed_fe_reset and mtk_wed_fe_reset_complete dereference a
-pointer on uninitialized stack memory.
-Break out of both functions in case a hw_list entry is 0.
-
-Fixes: 08a764a7c51b ("net: ethernet: mtk_wed: add reset/reset_complete callbacks")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Link: https://lore.kernel.org/r/5465c1609b464cc7407ae1530c40821dcdf9d3e6.1692634266.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_wed.c | 12 ++++++++++--
- 1 file changed, 10 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -214,9 +214,13 @@ void mtk_wed_fe_reset(void)
- 
- 	for (i = 0; i < ARRAY_SIZE(hw_list); i++) {
- 		struct mtk_wed_hw *hw = hw_list[i];
--		struct mtk_wed_device *dev = hw->wed_dev;
-+		struct mtk_wed_device *dev;
- 		int err;
- 
-+		if (!hw)
-+			break;
-+
-+		dev = hw->wed_dev;
- 		if (!dev || !dev->wlan.reset)
- 			continue;
- 
-@@ -237,8 +241,12 @@ void mtk_wed_fe_reset_complete(void)
- 
- 	for (i = 0; i < ARRAY_SIZE(hw_list); i++) {
- 		struct mtk_wed_hw *hw = hw_list[i];
--		struct mtk_wed_device *dev = hw->wed_dev;
-+		struct mtk_wed_device *dev;
-+
-+		if (!hw)
-+			break;
- 
-+		dev = hw->wed_dev;
- 		if (!dev || !dev->wlan.reset_complete)
- 			continue;
- 
diff --git a/target/linux/generic/backport-6.1/750-v6.5-16-net-ethernet-mtk_eth_soc-fix-register-definitions-fo.patch b/target/linux/generic/backport-6.1/750-v6.5-16-net-ethernet-mtk_eth_soc-fix-register-definitions-fo.patch
deleted file mode 100644
index 2190761fdd49..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-16-net-ethernet-mtk_eth_soc-fix-register-definitions-fo.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 489aea123d74a846ce746bfdb3efe1e7ad512e0d Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 22 Aug 2023 17:31:24 +0100
-Subject: [PATCH 110/250] net: ethernet: mtk_eth_soc: fix register definitions
- for MT7988
-
-More register macros need to be adjusted for the 3rd GMAC on MT7988.
-Account for added bit in SYSCFG0_SGMII_MASK.
-
-Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Link: https://lore.kernel.org/r/1c8da012e2ca80939906d85f314138c552139f0f.1692721443.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -133,10 +133,12 @@
- #define MTK_GDMA_XGDM_SEL	BIT(31)
- 
- /* Unicast Filter MAC Address Register - Low */
--#define MTK_GDMA_MAC_ADRL(x)	(0x508 + (x * 0x1000))
-+#define MTK_GDMA_MAC_ADRL(x)	({ typeof(x) _x = (x); (_x == MTK_GMAC3_ID) ?	\
-+				   0x548 : 0x508 + (_x * 0x1000); })
- 
- /* Unicast Filter MAC Address Register - High */
--#define MTK_GDMA_MAC_ADRH(x)	(0x50C + (x * 0x1000))
-+#define MTK_GDMA_MAC_ADRH(x)	({ typeof(x) _x = (x); (_x == MTK_GMAC3_ID) ?	\
-+				   0x54C : 0x50C + (_x * 0x1000); })
- 
- /* FE global misc reg*/
- #define MTK_FE_GLO_MISC         0x124
-@@ -503,7 +505,7 @@
- #define ETHSYS_SYSCFG0		0x14
- #define SYSCFG0_GE_MASK		0x3
- #define SYSCFG0_GE_MODE(x, y)	(x << (12 + (y * 2)))
--#define SYSCFG0_SGMII_MASK     GENMASK(9, 8)
-+#define SYSCFG0_SGMII_MASK     GENMASK(9, 7)
- #define SYSCFG0_SGMII_GMAC1    ((2 << 8) & SYSCFG0_SGMII_MASK)
- #define SYSCFG0_SGMII_GMAC2    ((3 << 8) & SYSCFG0_SGMII_MASK)
- #define SYSCFG0_SGMII_GMAC1_V2 BIT(9)
diff --git a/target/linux/generic/backport-6.1/750-v6.5-17-net-ethernet-mtk_eth_soc-add-reset-bits-for-MT7988.patch b/target/linux/generic/backport-6.1/750-v6.5-17-net-ethernet-mtk_eth_soc-add-reset-bits-for-MT7988.patch
deleted file mode 100644
index e87e0f25225e..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-17-net-ethernet-mtk_eth_soc-add-reset-bits-for-MT7988.patch
+++ /dev/null
@@ -1,188 +0,0 @@
-From 15a84d1c44ae8c1451c265ee60500588a24e8cd6 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 22 Aug 2023 17:32:03 +0100
-Subject: [PATCH 111/250] net: ethernet: mtk_eth_soc: add reset bits for MT7988
-
-Add bits needed to reset the frame engine on MT7988.
-
-Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/89b6c38380e7a3800c1362aa7575600717bc7543.1692721443.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 76 +++++++++++++++------
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 16 +++--
- 2 files changed, 68 insertions(+), 24 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -3593,19 +3593,34 @@ static void mtk_hw_reset(struct mtk_eth
- {
- 	u32 val;
- 
--	if (mtk_is_netsys_v2_or_greater(eth)) {
-+	if (mtk_is_netsys_v2_or_greater(eth))
- 		regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN, 0);
-+
-+	if (mtk_is_netsys_v3_or_greater(eth)) {
-+		val = RSTCTRL_PPE0_V3;
-+
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+			val |= RSTCTRL_PPE1_V3;
-+
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE2))
-+			val |= RSTCTRL_PPE2;
-+
-+		val |= RSTCTRL_WDMA0 | RSTCTRL_WDMA1 | RSTCTRL_WDMA2;
-+	} else if (mtk_is_netsys_v2_or_greater(eth)) {
- 		val = RSTCTRL_PPE0_V2;
-+
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+			val |= RSTCTRL_PPE1;
- 	} else {
- 		val = RSTCTRL_PPE0;
- 	}
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
--		val |= RSTCTRL_PPE1;
--
- 	ethsys_reset(eth, RSTCTRL_ETH | RSTCTRL_FE | val);
- 
--	if (mtk_is_netsys_v2_or_greater(eth))
-+	if (mtk_is_netsys_v3_or_greater(eth))
-+		regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN,
-+			     0x6f8ff);
-+	else if (mtk_is_netsys_v2_or_greater(eth))
- 		regmap_write(eth->ethsys, ETHSYS_FE_RST_CHK_IDLE_EN,
- 			     0x3ffffff);
- }
-@@ -3631,13 +3646,21 @@ static void mtk_hw_warm_reset(struct mtk
- 		return;
- 	}
- 
--	if (mtk_is_netsys_v2_or_greater(eth))
-+	if (mtk_is_netsys_v3_or_greater(eth)) {
-+		rst_mask = RSTCTRL_ETH | RSTCTRL_PPE0_V3;
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+			rst_mask |= RSTCTRL_PPE1_V3;
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE2))
-+			rst_mask |= RSTCTRL_PPE2;
-+
-+		rst_mask |= RSTCTRL_WDMA0 | RSTCTRL_WDMA1 | RSTCTRL_WDMA2;
-+	} else if (mtk_is_netsys_v2_or_greater(eth)) {
- 		rst_mask = RSTCTRL_ETH | RSTCTRL_PPE0_V2;
--	else
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+			rst_mask |= RSTCTRL_PPE1;
-+	} else {
- 		rst_mask = RSTCTRL_ETH | RSTCTRL_PPE0;
--
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
--		rst_mask |= RSTCTRL_PPE1;
-+	}
- 
- 	regmap_update_bits(eth->ethsys, ETHSYS_RSTCTRL, rst_mask, rst_mask);
- 
-@@ -3989,11 +4012,17 @@ static void mtk_prepare_for_reset(struct
- 	u32 val;
- 	int i;
- 
--	/* disabe FE P3 and P4 */
--	val = mtk_r32(eth, MTK_FE_GLO_CFG) | MTK_FE_LINK_DOWN_P3;
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
--		val |= MTK_FE_LINK_DOWN_P4;
--	mtk_w32(eth, val, MTK_FE_GLO_CFG);
-+	/* set FE PPE ports link down */
-+	for (i = MTK_GMAC1_ID;
-+	     i <= (mtk_is_netsys_v3_or_greater(eth) ? MTK_GMAC3_ID : MTK_GMAC2_ID);
-+	     i += 2) {
-+		val = mtk_r32(eth, MTK_FE_GLO_CFG(i)) | MTK_FE_LINK_DOWN_P(PSE_PPE0_PORT);
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+			val |= MTK_FE_LINK_DOWN_P(PSE_PPE1_PORT);
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE2))
-+			val |= MTK_FE_LINK_DOWN_P(PSE_PPE2_PORT);
-+		mtk_w32(eth, val, MTK_FE_GLO_CFG(i));
-+	}
- 
- 	/* adjust PPE configurations to prepare for reset */
- 	for (i = 0; i < ARRAY_SIZE(eth->ppe); i++)
-@@ -4054,11 +4083,18 @@ static void mtk_pending_work(struct work
- 		}
- 	}
- 
--	/* enabe FE P3 and P4 */
--	val = mtk_r32(eth, MTK_FE_GLO_CFG) & ~MTK_FE_LINK_DOWN_P3;
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
--		val &= ~MTK_FE_LINK_DOWN_P4;
--	mtk_w32(eth, val, MTK_FE_GLO_CFG);
-+	/* set FE PPE ports link up */
-+	for (i = MTK_GMAC1_ID;
-+	     i <= (mtk_is_netsys_v3_or_greater(eth) ? MTK_GMAC3_ID : MTK_GMAC2_ID);
-+	     i += 2) {
-+		val = mtk_r32(eth, MTK_FE_GLO_CFG(i)) & ~MTK_FE_LINK_DOWN_P(PSE_PPE0_PORT);
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE1))
-+			val &= ~MTK_FE_LINK_DOWN_P(PSE_PPE1_PORT);
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_RSTCTRL_PPE2))
-+			val &= ~MTK_FE_LINK_DOWN_P(PSE_PPE2_PORT);
-+
-+		mtk_w32(eth, val, MTK_FE_GLO_CFG(i));
-+	}
- 
- 	clear_bit(MTK_RESETTING, &eth->state);
- 
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -76,9 +76,8 @@
- #define	MTK_HW_LRO_SDL_REMAIN_ROOM	1522
- 
- /* Frame Engine Global Configuration */
--#define MTK_FE_GLO_CFG		0x00
--#define MTK_FE_LINK_DOWN_P3	BIT(11)
--#define MTK_FE_LINK_DOWN_P4	BIT(12)
-+#define MTK_FE_GLO_CFG(x)	(((x) == MTK_GMAC3_ID) ? 0x24 : 0x00)
-+#define MTK_FE_LINK_DOWN_P(x)	BIT(((x) + 8) % 16)
- 
- /* Frame Engine Global Reset Register */
- #define MTK_RST_GL		0x04
-@@ -522,9 +521,15 @@
- /* ethernet reset control register */
- #define ETHSYS_RSTCTRL			0x34
- #define RSTCTRL_FE			BIT(6)
-+#define RSTCTRL_WDMA0			BIT(24)
-+#define RSTCTRL_WDMA1			BIT(25)
-+#define RSTCTRL_WDMA2			BIT(26)
- #define RSTCTRL_PPE0			BIT(31)
- #define RSTCTRL_PPE0_V2			BIT(30)
- #define RSTCTRL_PPE1			BIT(31)
-+#define RSTCTRL_PPE0_V3			BIT(29)
-+#define RSTCTRL_PPE1_V3			BIT(30)
-+#define RSTCTRL_PPE2			BIT(31)
- #define RSTCTRL_ETH			BIT(23)
- 
- /* ethernet reset check idle register */
-@@ -931,6 +936,7 @@ enum mkt_eth_capabilities {
- 	MTK_QDMA_BIT,
- 	MTK_SOC_MT7628_BIT,
- 	MTK_RSTCTRL_PPE1_BIT,
-+	MTK_RSTCTRL_PPE2_BIT,
- 	MTK_U3_COPHY_V2_BIT,
- 
- 	/* MUX BITS*/
-@@ -965,6 +971,7 @@ enum mkt_eth_capabilities {
- #define MTK_QDMA		BIT_ULL(MTK_QDMA_BIT)
- #define MTK_SOC_MT7628		BIT_ULL(MTK_SOC_MT7628_BIT)
- #define MTK_RSTCTRL_PPE1	BIT_ULL(MTK_RSTCTRL_PPE1_BIT)
-+#define MTK_RSTCTRL_PPE2	BIT_ULL(MTK_RSTCTRL_PPE2_BIT)
- #define MTK_U3_COPHY_V2		BIT_ULL(MTK_U3_COPHY_V2_BIT)
- 
- #define MTK_ETH_MUX_GDM1_TO_GMAC1_ESW		\
-@@ -1047,7 +1054,8 @@ enum mkt_eth_capabilities {
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
- 		      MTK_RSTCTRL_PPE1)
- 
--#define MT7988_CAPS  (MTK_GDM1_ESW | MTK_QDMA | MTK_RSTCTRL_PPE1)
-+#define MT7988_CAPS  (MTK_GDM1_ESW | MTK_QDMA | MTK_RSTCTRL_PPE1 | \
-+		      MTK_RSTCTRL_PPE2)
- 
- struct mtk_tx_dma_desc_info {
- 	dma_addr_t	addr;
diff --git a/target/linux/generic/backport-6.1/750-v6.5-18-net-ethernet-mtk_eth_soc-add-support-for-in-SoC-SRAM.patch b/target/linux/generic/backport-6.1/750-v6.5-18-net-ethernet-mtk_eth_soc-add-support-for-in-SoC-SRAM.patch
deleted file mode 100644
index 2d0951a9ecd4..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-18-net-ethernet-mtk_eth_soc-add-support-for-in-SoC-SRAM.patch
+++ /dev/null
@@ -1,254 +0,0 @@
-From 25ce45fe40b574e5d7ffa407f7f2db03e7d5a910 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 22 Aug 2023 17:32:54 +0100
-Subject: [PATCH 112/250] net: ethernet: mtk_eth_soc: add support for in-SoC
- SRAM
-
-MT7981, MT7986 and MT7988 come with in-SoC SRAM dedicated for Ethernet
-DMA rings. Support using the SRAM without breaking existing device tree
-bindings, ie. only new SoC starting from MT7988 will have the SRAM
-declared as additional resource in device tree. For MT7981 and MT7986
-an offset on top of the main I/O base is used.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/e45e0f230c63ad58869e8fe35b95a2fb8925b625.1692721443.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 88 ++++++++++++++++-----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 12 ++-
- 2 files changed, 78 insertions(+), 22 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1117,10 +1117,13 @@ static int mtk_init_fq_dma(struct mtk_et
- 	dma_addr_t dma_addr;
- 	int i;
- 
--	eth->scratch_ring = dma_alloc_coherent(eth->dma_dev,
--					       cnt * soc->txrx.txd_size,
--					       &eth->phy_scratch_ring,
--					       GFP_KERNEL);
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SRAM))
-+		eth->scratch_ring = eth->sram_base;
-+	else
-+		eth->scratch_ring = dma_alloc_coherent(eth->dma_dev,
-+						       cnt * soc->txrx.txd_size,
-+						       &eth->phy_scratch_ring,
-+						       GFP_KERNEL);
- 	if (unlikely(!eth->scratch_ring))
- 		return -ENOMEM;
- 
-@@ -2428,8 +2431,14 @@ static int mtk_tx_alloc(struct mtk_eth *
- 	if (!ring->buf)
- 		goto no_tx_mem;
- 
--	ring->dma = dma_alloc_coherent(eth->dma_dev, ring_size * sz,
--				       &ring->phys, GFP_KERNEL);
-+	if (MTK_HAS_CAPS(soc->caps, MTK_SRAM)) {
-+		ring->dma = eth->sram_base + ring_size * sz;
-+		ring->phys = eth->phy_scratch_ring + ring_size * (dma_addr_t)sz;
-+	} else {
-+		ring->dma = dma_alloc_coherent(eth->dma_dev, ring_size * sz,
-+					       &ring->phys, GFP_KERNEL);
-+	}
-+
- 	if (!ring->dma)
- 		goto no_tx_mem;
- 
-@@ -2528,8 +2537,7 @@ static void mtk_tx_clean(struct mtk_eth
- 		kfree(ring->buf);
- 		ring->buf = NULL;
- 	}
--
--	if (ring->dma) {
-+	if (!MTK_HAS_CAPS(soc->caps, MTK_SRAM) && ring->dma) {
- 		dma_free_coherent(eth->dma_dev,
- 				  ring->dma_size * soc->txrx.txd_size,
- 				  ring->dma, ring->phys);
-@@ -2548,9 +2556,14 @@ static int mtk_rx_alloc(struct mtk_eth *
- {
- 	const struct mtk_reg_map *reg_map = eth->soc->reg_map;
- 	struct mtk_rx_ring *ring;
--	int rx_data_len, rx_dma_size;
-+	int rx_data_len, rx_dma_size, tx_ring_size;
- 	int i;
- 
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_QDMA))
-+		tx_ring_size = MTK_QDMA_RING_SIZE;
-+	else
-+		tx_ring_size = MTK_DMA_SIZE;
-+
- 	if (rx_flag == MTK_RX_FLAGS_QDMA) {
- 		if (ring_no)
- 			return -EINVAL;
-@@ -2585,9 +2598,20 @@ static int mtk_rx_alloc(struct mtk_eth *
- 		ring->page_pool = pp;
- 	}
- 
--	ring->dma = dma_alloc_coherent(eth->dma_dev,
--				       rx_dma_size * eth->soc->txrx.rxd_size,
--				       &ring->phys, GFP_KERNEL);
-+	if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SRAM) ||
-+	    rx_flag != MTK_RX_FLAGS_NORMAL) {
-+		ring->dma = dma_alloc_coherent(eth->dma_dev,
-+					       rx_dma_size * eth->soc->txrx.rxd_size,
-+					       &ring->phys, GFP_KERNEL);
-+	} else {
-+		struct mtk_tx_ring *tx_ring = &eth->tx_ring;
-+
-+		ring->dma = tx_ring->dma + tx_ring_size *
-+			    eth->soc->txrx.txd_size * (ring_no + 1);
-+		ring->phys = tx_ring->phys + tx_ring_size *
-+			     eth->soc->txrx.txd_size * (ring_no + 1);
-+	}
-+
- 	if (!ring->dma)
- 		return -ENOMEM;
- 
-@@ -2672,7 +2696,7 @@ static int mtk_rx_alloc(struct mtk_eth *
- 	return 0;
- }
- 
--static void mtk_rx_clean(struct mtk_eth *eth, struct mtk_rx_ring *ring)
-+static void mtk_rx_clean(struct mtk_eth *eth, struct mtk_rx_ring *ring, bool in_sram)
- {
- 	int i;
- 
-@@ -2695,7 +2719,7 @@ static void mtk_rx_clean(struct mtk_eth
- 		ring->data = NULL;
- 	}
- 
--	if (ring->dma) {
-+	if (!in_sram && ring->dma) {
- 		dma_free_coherent(eth->dma_dev,
- 				  ring->dma_size * eth->soc->txrx.rxd_size,
- 				  ring->dma, ring->phys);
-@@ -3058,7 +3082,7 @@ static void mtk_dma_free(struct mtk_eth
- 	for (i = 0; i < MTK_MAX_DEVS; i++)
- 		if (eth->netdev[i])
- 			netdev_reset_queue(eth->netdev[i]);
--	if (eth->scratch_ring) {
-+	if (!MTK_HAS_CAPS(soc->caps, MTK_SRAM) && eth->scratch_ring) {
- 		dma_free_coherent(eth->dma_dev,
- 				  MTK_QDMA_RING_SIZE * soc->txrx.txd_size,
- 				  eth->scratch_ring, eth->phy_scratch_ring);
-@@ -3066,13 +3090,13 @@ static void mtk_dma_free(struct mtk_eth
- 		eth->phy_scratch_ring = 0;
- 	}
- 	mtk_tx_clean(eth);
--	mtk_rx_clean(eth, &eth->rx_ring[0]);
--	mtk_rx_clean(eth, &eth->rx_ring_qdma);
-+	mtk_rx_clean(eth, &eth->rx_ring[0], MTK_HAS_CAPS(soc->caps, MTK_SRAM));
-+	mtk_rx_clean(eth, &eth->rx_ring_qdma, false);
- 
- 	if (eth->hwlro) {
- 		mtk_hwlro_rx_uninit(eth);
- 		for (i = 1; i < MTK_MAX_RX_RING_NUM; i++)
--			mtk_rx_clean(eth, &eth->rx_ring[i]);
-+			mtk_rx_clean(eth, &eth->rx_ring[i], false);
- 	}
- 
- 	kfree(eth->scratch_head);
-@@ -4640,7 +4664,7 @@ static int mtk_sgmii_init(struct mtk_eth
- 
- static int mtk_probe(struct platform_device *pdev)
- {
--	struct resource *res = NULL;
-+	struct resource *res = NULL, *res_sram;
- 	struct device_node *mac_np;
- 	struct mtk_eth *eth;
- 	int err, i;
-@@ -4660,6 +4684,20 @@ static int mtk_probe(struct platform_dev
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
- 		eth->ip_align = NET_IP_ALIGN;
- 
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SRAM)) {
-+		/* SRAM is actual memory and supports transparent access just like DRAM.
-+		 * Hence we don't require __iomem being set and don't need to use accessor
-+		 * functions to read from or write to SRAM.
-+		 */
-+		if (mtk_is_netsys_v3_or_greater(eth)) {
-+			eth->sram_base = (void __force *)devm_platform_ioremap_resource(pdev, 1);
-+			if (IS_ERR(eth->sram_base))
-+				return PTR_ERR(eth->sram_base);
-+		} else {
-+			eth->sram_base = (void __force *)eth->base + MTK_ETH_SRAM_OFFSET;
-+		}
-+	}
-+
- 	spin_lock_init(&eth->page_lock);
- 	spin_lock_init(&eth->tx_irq_lock);
- 	spin_lock_init(&eth->rx_irq_lock);
-@@ -4723,6 +4761,18 @@ static int mtk_probe(struct platform_dev
- 			err = -EINVAL;
- 			goto err_destroy_sgmii;
- 		}
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_SRAM)) {
-+			if (mtk_is_netsys_v3_or_greater(eth)) {
-+				res_sram = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+				if (!res_sram) {
-+					err = -EINVAL;
-+					goto err_destroy_sgmii;
-+				}
-+				eth->phy_scratch_ring = res_sram->start;
-+			} else {
-+				eth->phy_scratch_ring = res->start + MTK_ETH_SRAM_OFFSET;
-+			}
-+		}
- 	}
- 
- 	if (eth->soc->offload_version) {
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -139,6 +139,9 @@
- #define MTK_GDMA_MAC_ADRH(x)	({ typeof(x) _x = (x); (_x == MTK_GMAC3_ID) ?	\
- 				   0x54C : 0x50C + (_x * 0x1000); })
- 
-+/* Internal SRAM offset */
-+#define MTK_ETH_SRAM_OFFSET	0x40000
-+
- /* FE global misc reg*/
- #define MTK_FE_GLO_MISC         0x124
- 
-@@ -938,6 +941,7 @@ enum mkt_eth_capabilities {
- 	MTK_RSTCTRL_PPE1_BIT,
- 	MTK_RSTCTRL_PPE2_BIT,
- 	MTK_U3_COPHY_V2_BIT,
-+	MTK_SRAM_BIT,
- 
- 	/* MUX BITS*/
- 	MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT,
-@@ -973,6 +977,7 @@ enum mkt_eth_capabilities {
- #define MTK_RSTCTRL_PPE1	BIT_ULL(MTK_RSTCTRL_PPE1_BIT)
- #define MTK_RSTCTRL_PPE2	BIT_ULL(MTK_RSTCTRL_PPE2_BIT)
- #define MTK_U3_COPHY_V2		BIT_ULL(MTK_U3_COPHY_V2_BIT)
-+#define MTK_SRAM		BIT_ULL(MTK_SRAM_BIT)
- 
- #define MTK_ETH_MUX_GDM1_TO_GMAC1_ESW		\
- 	BIT_ULL(MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT)
-@@ -1048,14 +1053,14 @@ enum mkt_eth_capabilities {
- #define MT7981_CAPS  (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | MTK_GMAC2_GEPHY | \
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
- 		      MTK_MUX_U3_GMAC2_TO_QPHY | MTK_U3_COPHY_V2 | \
--		      MTK_RSTCTRL_PPE1)
-+		      MTK_RSTCTRL_PPE1 | MTK_SRAM)
- 
- #define MT7986_CAPS  (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | \
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
--		      MTK_RSTCTRL_PPE1)
-+		      MTK_RSTCTRL_PPE1 | MTK_SRAM)
- 
- #define MT7988_CAPS  (MTK_GDM1_ESW | MTK_QDMA | MTK_RSTCTRL_PPE1 | \
--		      MTK_RSTCTRL_PPE2)
-+		      MTK_RSTCTRL_PPE2 | MTK_SRAM)
- 
- struct mtk_tx_dma_desc_info {
- 	dma_addr_t	addr;
-@@ -1215,6 +1220,7 @@ struct mtk_eth {
- 	struct device			*dev;
- 	struct device			*dma_dev;
- 	void __iomem			*base;
-+	void				*sram_base;
- 	spinlock_t			page_lock;
- 	spinlock_t			tx_irq_lock;
- 	spinlock_t			rx_irq_lock;
diff --git a/target/linux/generic/backport-6.1/750-v6.5-19-net-ethernet-mtk_eth_soc-support-36-bit-DMA-addressi.patch b/target/linux/generic/backport-6.1/750-v6.5-19-net-ethernet-mtk_eth_soc-support-36-bit-DMA-addressi.patch
deleted file mode 100644
index 416c4f48efc4..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-19-net-ethernet-mtk_eth_soc-support-36-bit-DMA-addressi.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From 0b0d606eb9650fa01dd5621e072aa29a10544399 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 22 Aug 2023 17:33:12 +0100
-Subject: [PATCH 113/250] net: ethernet: mtk_eth_soc: support 36-bit DMA
- addressing on MT7988
-
-Systems having 4 GiB of RAM and more require DMA addressing beyond the
-current 32-bit limit. Starting from MT7988 the hardware now supports
-36-bit DMA addressing, let's use that new capability in the driver to
-avoid running into swiotlb on systems with 4 GiB of RAM or more.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/95b919c98876c9e49761e44662e7c937479eecb8.1692721443.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 30 +++++++++++++++++++--
- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 22 +++++++++++++--
- 2 files changed, 48 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1310,6 +1310,10 @@ static void mtk_tx_set_dma_desc_v2(struc
- 	data = TX_DMA_PLEN0(info->size);
- 	if (info->last)
- 		data |= TX_DMA_LS0;
-+
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA))
-+		data |= TX_DMA_PREP_ADDR64(info->addr);
-+
- 	WRITE_ONCE(desc->txd3, data);
- 
- 	 /* set forward port */
-@@ -1979,6 +1983,7 @@ static int mtk_poll_rx(struct napi_struc
- 	bool xdp_flush = false;
- 	int idx;
- 	struct sk_buff *skb;
-+	u64 addr64 = 0;
- 	u8 *data, *new_data;
- 	struct mtk_rx_dma_v2 *rxd, trxd;
- 	int done = 0, bytes = 0;
-@@ -2094,7 +2099,10 @@ static int mtk_poll_rx(struct napi_struc
- 				goto release_desc;
- 			}
- 
--			dma_unmap_single(eth->dma_dev, trxd.rxd1,
-+			if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA))
-+				addr64 = RX_DMA_GET_ADDR64(trxd.rxd2);
-+
-+			dma_unmap_single(eth->dma_dev, ((u64)trxd.rxd1 | addr64),
- 					 ring->buf_size, DMA_FROM_DEVICE);
- 
- 			skb = build_skb(data, ring->frag_size);
-@@ -2160,6 +2168,9 @@ release_desc:
- 		else
- 			rxd->rxd2 = RX_DMA_PREP_PLEN0(ring->buf_size);
- 
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA))
-+			rxd->rxd2 |= RX_DMA_PREP_ADDR64(dma_addr);
-+
- 		ring->calc_idx = idx;
- 		done++;
- 	}
-@@ -2652,6 +2663,9 @@ static int mtk_rx_alloc(struct mtk_eth *
- 		else
- 			rxd->rxd2 = RX_DMA_PREP_PLEN0(ring->buf_size);
- 
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA))
-+			rxd->rxd2 |= RX_DMA_PREP_ADDR64(dma_addr);
-+
- 		rxd->rxd3 = 0;
- 		rxd->rxd4 = 0;
- 		if (mtk_is_netsys_v2_or_greater(eth)) {
-@@ -2698,6 +2712,7 @@ static int mtk_rx_alloc(struct mtk_eth *
- 
- static void mtk_rx_clean(struct mtk_eth *eth, struct mtk_rx_ring *ring, bool in_sram)
- {
-+	u64 addr64 = 0;
- 	int i;
- 
- 	if (ring->data && ring->dma) {
-@@ -2711,7 +2726,10 @@ static void mtk_rx_clean(struct mtk_eth
- 			if (!rxd->rxd1)
- 				continue;
- 
--			dma_unmap_single(eth->dma_dev, rxd->rxd1,
-+			if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA))
-+				addr64 = RX_DMA_GET_ADDR64(rxd->rxd2);
-+
-+			dma_unmap_single(eth->dma_dev, ((u64)rxd->rxd1 | addr64),
- 					 ring->buf_size, DMA_FROM_DEVICE);
- 			mtk_rx_put_buff(ring, ring->data[i], false);
- 		}
-@@ -4698,6 +4716,14 @@ static int mtk_probe(struct platform_dev
- 		}
- 	}
- 
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA)) {
-+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(36));
-+		if (err) {
-+			dev_err(&pdev->dev, "Wrong DMA config\n");
-+			return -EINVAL;
-+		}
-+	}
-+
- 	spin_lock_init(&eth->page_lock);
- 	spin_lock_init(&eth->tx_irq_lock);
- 	spin_lock_init(&eth->rx_irq_lock);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -331,6 +331,14 @@
- #define TX_DMA_PLEN1(x)		((x) & eth->soc->txrx.dma_max_len)
- #define TX_DMA_SWC		BIT(14)
- #define TX_DMA_PQID		GENMASK(3, 0)
-+#define TX_DMA_ADDR64_MASK	GENMASK(3, 0)
-+#if IS_ENABLED(CONFIG_64BIT)
-+# define TX_DMA_GET_ADDR64(x)	(((u64)FIELD_GET(TX_DMA_ADDR64_MASK, (x))) << 32)
-+# define TX_DMA_PREP_ADDR64(x)	FIELD_PREP(TX_DMA_ADDR64_MASK, ((x) >> 32))
-+#else
-+# define TX_DMA_GET_ADDR64(x)	(0)
-+# define TX_DMA_PREP_ADDR64(x)	(0)
-+#endif
- 
- /* PDMA on MT7628 */
- #define TX_DMA_DONE		BIT(31)
-@@ -343,6 +351,14 @@
- #define RX_DMA_PREP_PLEN0(x)	(((x) & eth->soc->txrx.dma_max_len) << eth->soc->txrx.dma_len_offset)
- #define RX_DMA_GET_PLEN0(x)	(((x) >> eth->soc->txrx.dma_len_offset) & eth->soc->txrx.dma_max_len)
- #define RX_DMA_VTAG		BIT(15)
-+#define RX_DMA_ADDR64_MASK	GENMASK(3, 0)
-+#if IS_ENABLED(CONFIG_64BIT)
-+# define RX_DMA_GET_ADDR64(x)	(((u64)FIELD_GET(RX_DMA_ADDR64_MASK, (x))) << 32)
-+# define RX_DMA_PREP_ADDR64(x)	FIELD_PREP(RX_DMA_ADDR64_MASK, ((x) >> 32))
-+#else
-+# define RX_DMA_GET_ADDR64(x)	(0)
-+# define RX_DMA_PREP_ADDR64(x)	(0)
-+#endif
- 
- /* QDMA descriptor rxd3 */
- #define RX_DMA_VID(x)		((x) & VLAN_VID_MASK)
-@@ -942,6 +958,7 @@ enum mkt_eth_capabilities {
- 	MTK_RSTCTRL_PPE2_BIT,
- 	MTK_U3_COPHY_V2_BIT,
- 	MTK_SRAM_BIT,
-+	MTK_36BIT_DMA_BIT,
- 
- 	/* MUX BITS*/
- 	MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT,
-@@ -978,6 +995,7 @@ enum mkt_eth_capabilities {
- #define MTK_RSTCTRL_PPE2	BIT_ULL(MTK_RSTCTRL_PPE2_BIT)
- #define MTK_U3_COPHY_V2		BIT_ULL(MTK_U3_COPHY_V2_BIT)
- #define MTK_SRAM		BIT_ULL(MTK_SRAM_BIT)
-+#define MTK_36BIT_DMA	BIT_ULL(MTK_36BIT_DMA_BIT)
- 
- #define MTK_ETH_MUX_GDM1_TO_GMAC1_ESW		\
- 	BIT_ULL(MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT)
-@@ -1059,8 +1077,8 @@ enum mkt_eth_capabilities {
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
- 		      MTK_RSTCTRL_PPE1 | MTK_SRAM)
- 
--#define MT7988_CAPS  (MTK_GDM1_ESW | MTK_QDMA | MTK_RSTCTRL_PPE1 | \
--		      MTK_RSTCTRL_PPE2 | MTK_SRAM)
-+#define MT7988_CAPS  (MTK_36BIT_DMA | MTK_GDM1_ESW | MTK_QDMA | \
-+		      MTK_RSTCTRL_PPE1 | MTK_RSTCTRL_PPE2 | MTK_SRAM)
- 
- struct mtk_tx_dma_desc_info {
- 	dma_addr_t	addr;
diff --git a/target/linux/generic/backport-6.1/750-v6.5-20-net-ethernet-mtk_eth_soc-fix-uninitialized-variable.patch b/target/linux/generic/backport-6.1/750-v6.5-20-net-ethernet-mtk_eth_soc-fix-uninitialized-variable.patch
deleted file mode 100644
index d761866d0d8f..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-20-net-ethernet-mtk_eth_soc-fix-uninitialized-variable.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From e10a35abb3da12b812cfb6fc6137926a0c81e39a Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 10 Sep 2023 22:40:30 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix uninitialized variable
-
-Variable dma_addr in function mtk_poll_rx can be uninitialized on
-some of the error paths. In practise this doesn't matter, even random
-data present in uninitialized stack memory can safely be used in the
-way it happens in the error path.
-
-However, in order to make Smatch happy make sure the variable is
-always initialized.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1987,11 +1987,11 @@ static int mtk_poll_rx(struct napi_struc
- 	u8 *data, *new_data;
- 	struct mtk_rx_dma_v2 *rxd, trxd;
- 	int done = 0, bytes = 0;
-+	dma_addr_t dma_addr = DMA_MAPPING_ERROR;
- 
- 	while (done < budget) {
- 		unsigned int pktlen, *rxdcsum;
- 		struct net_device *netdev;
--		dma_addr_t dma_addr;
- 		u32 hash, reason;
- 		int mac = 0;
- 
-@@ -2168,7 +2168,8 @@ release_desc:
- 		else
- 			rxd->rxd2 = RX_DMA_PREP_PLEN0(ring->buf_size);
- 
--		if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA))
-+		if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA) &&
-+		    likely(dma_addr != DMA_MAPPING_ERROR))
- 			rxd->rxd2 |= RX_DMA_PREP_ADDR64(dma_addr);
- 
- 		ring->calc_idx = idx;
diff --git a/target/linux/generic/backport-6.1/750-v6.5-21-net-ethernet-mtk_eth_soc-fix-pse_port-configuration-.patch b/target/linux/generic/backport-6.1/750-v6.5-21-net-ethernet-mtk_eth_soc-fix-pse_port-configuration-.patch
deleted file mode 100644
index ac3e3a3e6769..000000000000
--- a/target/linux/generic/backport-6.1/750-v6.5-21-net-ethernet-mtk_eth_soc-fix-pse_port-configuration-.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 5a124b1fd3e6cb15a943f0cdfe96aa8f6d3d2f39 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 9 Sep 2023 20:41:56 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix pse_port configuration for
- MT7988
-
-MT7988 SoC support 3 NICs. Fix pse_port configuration in
-mtk_flow_set_output_device routine if the traffic is offloaded to eth2.
-Rely on mtk_pse_port definitions.
-
-Fixes: 88efedf517e6 ("net: ethernet: mtk_eth_soc: enable nft hw flowtable_offload for MT7988 SoC")
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/mediatek/mtk_ppe_offload.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -214,9 +214,11 @@ mtk_flow_set_output_device(struct mtk_et
- 	dsa_port = mtk_flow_get_dsa_port(&dev);
- 
- 	if (dev == eth->netdev[0])
--		pse_port = 1;
-+		pse_port = PSE_GDM1_PORT;
- 	else if (dev == eth->netdev[1])
--		pse_port = 2;
-+		pse_port = PSE_GDM2_PORT;
-+	else if (dev == eth->netdev[2])
-+		pse_port = PSE_GDM3_PORT;
- 	else
- 		return -EOPNOTSUPP;
- 
diff --git a/target/linux/generic/backport-6.1/751-01-v6.4-net-ethernet-mtk_eth_soc-add-code-for-offloading-flo.patch b/target/linux/generic/backport-6.1/751-01-v6.4-net-ethernet-mtk_eth_soc-add-code-for-offloading-flo.patch
deleted file mode 100644
index 46da5b283fa8..000000000000
--- a/target/linux/generic/backport-6.1/751-01-v6.4-net-ethernet-mtk_eth_soc-add-code-for-offloading-flo.patch
+++ /dev/null
@@ -1,271 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 20 Mar 2023 11:44:30 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: add code for offloading flows
- from wlan devices
-
-WED version 2 (on MT7986 and later) can offload flows originating from wireless
-devices. In order to make that work, ndo_setup_tc needs to be implemented on
-the netdevs. This adds the required code to offload flows coming in from WED,
-while keeping track of the incoming wed index used for selecting the correct
-PPE device.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.h   |   3 +
- .../net/ethernet/mediatek/mtk_ppe_offload.c   |  37 ++++---
- drivers/net/ethernet/mediatek/mtk_wed.c       | 101 ++++++++++++++++++
- include/linux/soc/mediatek/mtk_wed.h          |   6 ++
- 4 files changed, 133 insertions(+), 14 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1435,6 +1435,9 @@ int mtk_gmac_rgmii_path_setup(struct mtk
- int mtk_eth_offload_init(struct mtk_eth *eth);
- int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type,
- 		     void *type_data);
-+int mtk_flow_offload_cmd(struct mtk_eth *eth, struct flow_cls_offload *cls,
-+			 int ppe_index);
-+void mtk_flow_offload_cleanup(struct mtk_eth *eth, struct list_head *list);
- void mtk_eth_set_dma_device(struct mtk_eth *eth, struct device *dma_dev);
- 
- 
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -237,7 +237,8 @@ out:
- }
- 
- static int
--mtk_flow_offload_replace(struct mtk_eth *eth, struct flow_cls_offload *f)
-+mtk_flow_offload_replace(struct mtk_eth *eth, struct flow_cls_offload *f,
-+			 int ppe_index)
- {
- 	struct flow_rule *rule = flow_cls_offload_flow_rule(f);
- 	struct flow_action_entry *act;
-@@ -454,6 +455,7 @@ mtk_flow_offload_replace(struct mtk_eth
- 	entry->cookie = f->cookie;
- 	memcpy(&entry->data, &foe, sizeof(entry->data));
- 	entry->wed_index = wed_index;
-+	entry->ppe_index = ppe_index;
- 
- 	err = mtk_foe_entry_commit(eth->ppe[entry->ppe_index], entry);
- 	if (err < 0)
-@@ -522,25 +524,15 @@ mtk_flow_offload_stats(struct mtk_eth *e
- 
- static DEFINE_MUTEX(mtk_flow_offload_mutex);
- 
--static int
--mtk_eth_setup_tc_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv)
-+int mtk_flow_offload_cmd(struct mtk_eth *eth, struct flow_cls_offload *cls,
-+			 int ppe_index)
- {
--	struct flow_cls_offload *cls = type_data;
--	struct net_device *dev = cb_priv;
--	struct mtk_mac *mac = netdev_priv(dev);
--	struct mtk_eth *eth = mac->hw;
- 	int err;
- 
--	if (!tc_can_offload(dev))
--		return -EOPNOTSUPP;
--
--	if (type != TC_SETUP_CLSFLOWER)
--		return -EOPNOTSUPP;
--
- 	mutex_lock(&mtk_flow_offload_mutex);
- 	switch (cls->command) {
- 	case FLOW_CLS_REPLACE:
--		err = mtk_flow_offload_replace(eth, cls);
-+		err = mtk_flow_offload_replace(eth, cls, ppe_index);
- 		break;
- 	case FLOW_CLS_DESTROY:
- 		err = mtk_flow_offload_destroy(eth, cls);
-@@ -558,6 +550,23 @@ mtk_eth_setup_tc_block_cb(enum tc_setup_
- }
- 
- static int
-+mtk_eth_setup_tc_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv)
-+{
-+	struct flow_cls_offload *cls = type_data;
-+	struct net_device *dev = cb_priv;
-+	struct mtk_mac *mac = netdev_priv(dev);
-+	struct mtk_eth *eth = mac->hw;
-+
-+	if (!tc_can_offload(dev))
-+		return -EOPNOTSUPP;
-+
-+	if (type != TC_SETUP_CLSFLOWER)
-+		return -EOPNOTSUPP;
-+
-+	return mtk_flow_offload_cmd(eth, cls, 0);
-+}
-+
-+static int
- mtk_eth_setup_tc_block(struct net_device *dev, struct flow_block_offload *f)
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -13,6 +13,8 @@
- #include <linux/mfd/syscon.h>
- #include <linux/debugfs.h>
- #include <linux/soc/mediatek/mtk_wed.h>
-+#include <net/flow_offload.h>
-+#include <net/pkt_cls.h>
- #include "mtk_eth_soc.h"
- #include "mtk_wed_regs.h"
- #include "mtk_wed.h"
-@@ -41,6 +43,11 @@
- static struct mtk_wed_hw *hw_list[2];
- static DEFINE_MUTEX(hw_lock);
- 
-+struct mtk_wed_flow_block_priv {
-+	struct mtk_wed_hw *hw;
-+	struct net_device *dev;
-+};
-+
- static void
- wed_m32(struct mtk_wed_device *dev, u32 reg, u32 mask, u32 val)
- {
-@@ -1753,6 +1760,99 @@ out:
- 	mutex_unlock(&hw_lock);
- }
- 
-+static int
-+mtk_wed_setup_tc_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv)
-+{
-+	struct mtk_wed_flow_block_priv *priv = cb_priv;
-+	struct flow_cls_offload *cls = type_data;
-+	struct mtk_wed_hw *hw = priv->hw;
-+
-+	if (!tc_can_offload(priv->dev))
-+		return -EOPNOTSUPP;
-+
-+	if (type != TC_SETUP_CLSFLOWER)
-+		return -EOPNOTSUPP;
-+
-+	return mtk_flow_offload_cmd(hw->eth, cls, hw->index);
-+}
-+
-+static int
-+mtk_wed_setup_tc_block(struct mtk_wed_hw *hw, struct net_device *dev,
-+		       struct flow_block_offload *f)
-+{
-+	struct mtk_wed_flow_block_priv *priv;
-+	static LIST_HEAD(block_cb_list);
-+	struct flow_block_cb *block_cb;
-+	struct mtk_eth *eth = hw->eth;
-+	flow_setup_cb_t *cb;
-+
-+	if (!eth->soc->offload_version)
-+		return -EOPNOTSUPP;
-+
-+	if (f->binder_type != FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS)
-+		return -EOPNOTSUPP;
-+
-+	cb = mtk_wed_setup_tc_block_cb;
-+	f->driver_block_list = &block_cb_list;
-+
-+	switch (f->command) {
-+	case FLOW_BLOCK_BIND:
-+		block_cb = flow_block_cb_lookup(f->block, cb, dev);
-+		if (block_cb) {
-+			flow_block_cb_incref(block_cb);
-+			return 0;
-+		}
-+
-+		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-+		if (!priv)
-+			return -ENOMEM;
-+
-+		priv->hw = hw;
-+		priv->dev = dev;
-+		block_cb = flow_block_cb_alloc(cb, dev, priv, NULL);
-+		if (IS_ERR(block_cb)) {
-+			kfree(priv);
-+			return PTR_ERR(block_cb);
-+		}
-+
-+		flow_block_cb_incref(block_cb);
-+		flow_block_cb_add(block_cb, f);
-+		list_add_tail(&block_cb->driver_list, &block_cb_list);
-+		return 0;
-+	case FLOW_BLOCK_UNBIND:
-+		block_cb = flow_block_cb_lookup(f->block, cb, dev);
-+		if (!block_cb)
-+			return -ENOENT;
-+
-+		if (!flow_block_cb_decref(block_cb)) {
-+			flow_block_cb_remove(block_cb, f);
-+			list_del(&block_cb->driver_list);
-+			kfree(block_cb->cb_priv);
-+		}
-+		return 0;
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
-+static int
-+mtk_wed_setup_tc(struct mtk_wed_device *wed, struct net_device *dev,
-+		 enum tc_setup_type type, void *type_data)
-+{
-+	struct mtk_wed_hw *hw = wed->hw;
-+
-+	if (hw->version < 2)
-+		return -EOPNOTSUPP;
-+
-+	switch (type) {
-+	case TC_SETUP_BLOCK:
-+	case TC_SETUP_FT:
-+		return mtk_wed_setup_tc_block(hw, dev, type_data);
-+	default:
-+		return -EOPNOTSUPP;
-+	}
-+}
-+
- void mtk_wed_add_hw(struct device_node *np, struct mtk_eth *eth,
- 		    void __iomem *wdma, phys_addr_t wdma_phy,
- 		    int index)
-@@ -1772,6 +1872,7 @@ void mtk_wed_add_hw(struct device_node *
- 		.irq_set_mask = mtk_wed_irq_set_mask,
- 		.detach = mtk_wed_detach,
- 		.ppe_check = mtk_wed_ppe_check,
-+		.setup_tc = mtk_wed_setup_tc,
- 	};
- 	struct device_node *eth_np = eth->dev->of_node;
- 	struct platform_device *pdev;
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -6,6 +6,7 @@
- #include <linux/regmap.h>
- #include <linux/pci.h>
- #include <linux/skbuff.h>
-+#include <linux/netdevice.h>
- 
- #define MTK_WED_TX_QUEUES		2
- #define MTK_WED_RX_QUEUES		2
-@@ -180,6 +181,8 @@ struct mtk_wed_ops {
- 
- 	u32 (*irq_get)(struct mtk_wed_device *dev, u32 mask);
- 	void (*irq_set_mask)(struct mtk_wed_device *dev, u32 mask);
-+	int (*setup_tc)(struct mtk_wed_device *wed, struct net_device *dev,
-+			enum tc_setup_type type, void *type_data);
- };
- 
- extern const struct mtk_wed_ops __rcu *mtk_soc_wed_ops;
-@@ -238,6 +241,8 @@ mtk_wed_get_rx_capa(struct mtk_wed_devic
- 	(_dev)->ops->msg_update(_dev, _id, _msg, _len)
- #define mtk_wed_device_stop(_dev) (_dev)->ops->stop(_dev)
- #define mtk_wed_device_dma_reset(_dev) (_dev)->ops->reset_dma(_dev)
-+#define mtk_wed_device_setup_tc(_dev, _netdev, _type, _type_data) \
-+	(_dev)->ops->setup_tc(_dev, _netdev, _type, _type_data)
- #else
- static inline bool mtk_wed_device_active(struct mtk_wed_device *dev)
- {
-@@ -256,6 +261,7 @@ static inline bool mtk_wed_device_active
- #define mtk_wed_device_update_msg(_dev, _id, _msg, _len) -ENODEV
- #define mtk_wed_device_stop(_dev) do {} while (0)
- #define mtk_wed_device_dma_reset(_dev) do {} while (0)
-+#define mtk_wed_device_setup_tc(_dev, _netdev, _type, _type_data) -EOPNOTSUPP
- #endif
- 
- #endif
diff --git a/target/linux/generic/backport-6.1/751-02-v6.4-net-ethernet-mediatek-mtk_ppe-prefer-newly-added-l2-.patch b/target/linux/generic/backport-6.1/751-02-v6.4-net-ethernet-mediatek-mtk_ppe-prefer-newly-added-l2-.patch
deleted file mode 100644
index b1796641a33e..000000000000
--- a/target/linux/generic/backport-6.1/751-02-v6.4-net-ethernet-mediatek-mtk_ppe-prefer-newly-added-l2-.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 20 Mar 2023 15:37:55 +0100
-Subject: [PATCH] net: ethernet: mediatek: mtk_ppe: prefer newly added l2
- flows over existing ones
-
-When a device is roaming between interfaces and a new flow entry is created,
-we should assume that its output device is more up to date than whatever
-entry existed already.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -656,10 +656,20 @@ void mtk_foe_entry_clear(struct mtk_ppe
- static int
- mtk_foe_entry_commit_l2(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
-+	struct mtk_flow_entry *prev;
-+
- 	entry->type = MTK_FLOW_TYPE_L2;
- 
--	return rhashtable_insert_fast(&ppe->l2_flows, &entry->l2_node,
--				      mtk_flow_l2_ht_params);
-+	prev = rhashtable_lookup_get_insert_fast(&ppe->l2_flows, &entry->l2_node,
-+						 mtk_flow_l2_ht_params);
-+	if (likely(!prev))
-+		return 0;
-+
-+	if (IS_ERR(prev))
-+		return PTR_ERR(prev);
-+
-+	return rhashtable_replace_fast(&ppe->l2_flows, &prev->l2_node,
-+				       &entry->l2_node, mtk_flow_l2_ht_params);
- }
- 
- int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
diff --git a/target/linux/generic/backport-6.1/751-03-v6.4-net-ethernet-mtk_eth_soc-improve-keeping-track-of-of.patch b/target/linux/generic/backport-6.1/751-03-v6.4-net-ethernet-mtk_eth_soc-improve-keeping-track-of-of.patch
deleted file mode 100644
index 8b8a8e11c7fa..000000000000
--- a/target/linux/generic/backport-6.1/751-03-v6.4-net-ethernet-mtk_eth_soc-improve-keeping-track-of-of.patch
+++ /dev/null
@@ -1,334 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 23 Mar 2023 10:24:11 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: improve keeping track of
- offloaded flows
-
-Unify tracking of L2 and L3 flows. Use the generic list field in struct
-mtk_foe_entry for tracking L2 subflows. Preparation for improving
-flow accounting support.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/net/ethernet/mediatek/mtk_ppe.c | 162 ++++++++++++------------
- drivers/net/ethernet/mediatek/mtk_ppe.h |  15 +--
- 2 files changed, 86 insertions(+), 91 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -476,42 +476,43 @@ int mtk_foe_entry_set_queue(struct mtk_e
- 	return 0;
- }
- 
-+static int
-+mtk_flow_entry_match_len(struct mtk_eth *eth, struct mtk_foe_entry *entry)
-+{
-+	int type = mtk_get_ib1_pkt_type(eth, entry->ib1);
-+
-+	if (type > MTK_PPE_PKT_TYPE_IPV4_DSLITE)
-+		return offsetof(struct mtk_foe_entry, ipv6._rsv);
-+	else
-+		return offsetof(struct mtk_foe_entry, ipv4.ib2);
-+}
-+
- static bool
- mtk_flow_entry_match(struct mtk_eth *eth, struct mtk_flow_entry *entry,
--		     struct mtk_foe_entry *data)
-+		     struct mtk_foe_entry *data, int len)
- {
--	int type, len;
--
- 	if ((data->ib1 ^ entry->data.ib1) & MTK_FOE_IB1_UDP)
- 		return false;
- 
--	type = mtk_get_ib1_pkt_type(eth, entry->data.ib1);
--	if (type > MTK_PPE_PKT_TYPE_IPV4_DSLITE)
--		len = offsetof(struct mtk_foe_entry, ipv6._rsv);
--	else
--		len = offsetof(struct mtk_foe_entry, ipv4.ib2);
--
- 	return !memcmp(&entry->data.data, &data->data, len - 4);
- }
- 
- static void
--__mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
-+__mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry,
-+		      bool set_state)
- {
--	struct hlist_head *head;
- 	struct hlist_node *tmp;
- 
- 	if (entry->type == MTK_FLOW_TYPE_L2) {
- 		rhashtable_remove_fast(&ppe->l2_flows, &entry->l2_node,
- 				       mtk_flow_l2_ht_params);
- 
--		head = &entry->l2_flows;
--		hlist_for_each_entry_safe(entry, tmp, head, l2_data.list)
--			__mtk_foe_entry_clear(ppe, entry);
-+		hlist_for_each_entry_safe(entry, tmp, &entry->l2_flows, l2_list)
-+			__mtk_foe_entry_clear(ppe, entry, set_state);
- 		return;
- 	}
- 
--	hlist_del_init(&entry->list);
--	if (entry->hash != 0xffff) {
-+	if (entry->hash != 0xffff && set_state) {
- 		struct mtk_foe_entry *hwe = mtk_foe_get_entry(ppe, entry->hash);
- 
- 		hwe->ib1 &= ~MTK_FOE_IB1_STATE;
-@@ -531,7 +532,8 @@ __mtk_foe_entry_clear(struct mtk_ppe *pp
- 	if (entry->type != MTK_FLOW_TYPE_L2_SUBFLOW)
- 		return;
- 
--	hlist_del_init(&entry->l2_data.list);
-+	hlist_del_init(&entry->l2_list);
-+	hlist_del_init(&entry->list);
- 	kfree(entry);
- }
- 
-@@ -547,66 +549,55 @@ static int __mtk_foe_entry_idle_time(str
- 		return now - timestamp;
- }
- 
-+static bool
-+mtk_flow_entry_update(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
-+{
-+	struct mtk_foe_entry foe = {};
-+	struct mtk_foe_entry *hwe;
-+	u16 hash = entry->hash;
-+	int len;
-+
-+	if (hash == 0xffff)
-+		return false;
-+
-+	hwe = mtk_foe_get_entry(ppe, hash);
-+	len = mtk_flow_entry_match_len(ppe->eth, &entry->data);
-+	memcpy(&foe, hwe, len);
-+
-+	if (!mtk_flow_entry_match(ppe->eth, entry, &foe, len) ||
-+	    FIELD_GET(MTK_FOE_IB1_STATE, foe.ib1) != MTK_FOE_STATE_BIND)
-+		return false;
-+
-+	entry->data.ib1 = foe.ib1;
-+
-+	return true;
-+}
-+
- static void
- mtk_flow_entry_update_l2(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
- 	u32 ib1_ts_mask = mtk_get_ib1_ts_mask(ppe->eth);
- 	struct mtk_flow_entry *cur;
--	struct mtk_foe_entry *hwe;
- 	struct hlist_node *tmp;
- 	int idle;
- 
- 	idle = __mtk_foe_entry_idle_time(ppe, entry->data.ib1);
--	hlist_for_each_entry_safe(cur, tmp, &entry->l2_flows, l2_data.list) {
-+	hlist_for_each_entry_safe(cur, tmp, &entry->l2_flows, l2_list) {
- 		int cur_idle;
--		u32 ib1;
--
--		hwe = mtk_foe_get_entry(ppe, cur->hash);
--		ib1 = READ_ONCE(hwe->ib1);
- 
--		if (FIELD_GET(MTK_FOE_IB1_STATE, ib1) != MTK_FOE_STATE_BIND) {
--			cur->hash = 0xffff;
--			__mtk_foe_entry_clear(ppe, cur);
-+		if (!mtk_flow_entry_update(ppe, cur)) {
-+			__mtk_foe_entry_clear(ppe, entry, false);
- 			continue;
- 		}
- 
--		cur_idle = __mtk_foe_entry_idle_time(ppe, ib1);
-+		cur_idle = __mtk_foe_entry_idle_time(ppe, cur->data.ib1);
- 		if (cur_idle >= idle)
- 			continue;
- 
- 		idle = cur_idle;
- 		entry->data.ib1 &= ~ib1_ts_mask;
--		entry->data.ib1 |= hwe->ib1 & ib1_ts_mask;
--	}
--}
--
--static void
--mtk_flow_entry_update(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
--{
--	struct mtk_foe_entry foe = {};
--	struct mtk_foe_entry *hwe;
--
--	spin_lock_bh(&ppe_lock);
--
--	if (entry->type == MTK_FLOW_TYPE_L2) {
--		mtk_flow_entry_update_l2(ppe, entry);
--		goto out;
-+		entry->data.ib1 |= cur->data.ib1 & ib1_ts_mask;
- 	}
--
--	if (entry->hash == 0xffff)
--		goto out;
--
--	hwe = mtk_foe_get_entry(ppe, entry->hash);
--	memcpy(&foe, hwe, ppe->eth->soc->foe_entry_size);
--	if (!mtk_flow_entry_match(ppe->eth, entry, &foe)) {
--		entry->hash = 0xffff;
--		goto out;
--	}
--
--	entry->data.ib1 = foe.ib1;
--
--out:
--	spin_unlock_bh(&ppe_lock);
- }
- 
- static void
-@@ -649,7 +640,8 @@ __mtk_foe_entry_commit(struct mtk_ppe *p
- void mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
- 	spin_lock_bh(&ppe_lock);
--	__mtk_foe_entry_clear(ppe, entry);
-+	__mtk_foe_entry_clear(ppe, entry, true);
-+	hlist_del_init(&entry->list);
- 	spin_unlock_bh(&ppe_lock);
- }
- 
-@@ -696,8 +688,8 @@ mtk_foe_entry_commit_subflow(struct mtk_
- {
- 	const struct mtk_soc_data *soc = ppe->eth->soc;
- 	struct mtk_flow_entry *flow_info;
--	struct mtk_foe_entry foe = {}, *hwe;
- 	struct mtk_foe_mac_info *l2;
-+	struct mtk_foe_entry *hwe;
- 	u32 ib1_mask = mtk_get_ib1_pkt_type_mask(ppe->eth) | MTK_FOE_IB1_UDP;
- 	int type;
- 
-@@ -705,30 +697,30 @@ mtk_foe_entry_commit_subflow(struct mtk_
- 	if (!flow_info)
- 		return;
- 
--	flow_info->l2_data.base_flow = entry;
- 	flow_info->type = MTK_FLOW_TYPE_L2_SUBFLOW;
- 	flow_info->hash = hash;
- 	hlist_add_head(&flow_info->list,
- 		       &ppe->foe_flow[hash / soc->hash_offset]);
--	hlist_add_head(&flow_info->l2_data.list, &entry->l2_flows);
-+	hlist_add_head(&flow_info->l2_list, &entry->l2_flows);
- 
- 	hwe = mtk_foe_get_entry(ppe, hash);
--	memcpy(&foe, hwe, soc->foe_entry_size);
--	foe.ib1 &= ib1_mask;
--	foe.ib1 |= entry->data.ib1 & ~ib1_mask;
-+	memcpy(&flow_info->data, hwe, soc->foe_entry_size);
-+	flow_info->data.ib1 &= ib1_mask;
-+	flow_info->data.ib1 |= entry->data.ib1 & ~ib1_mask;
- 
--	l2 = mtk_foe_entry_l2(ppe->eth, &foe);
-+	l2 = mtk_foe_entry_l2(ppe->eth, &flow_info->data);
- 	memcpy(l2, &entry->data.bridge.l2, sizeof(*l2));
- 
--	type = mtk_get_ib1_pkt_type(ppe->eth, foe.ib1);
-+	type = mtk_get_ib1_pkt_type(ppe->eth, flow_info->data.ib1);
- 	if (type == MTK_PPE_PKT_TYPE_IPV4_HNAPT)
--		memcpy(&foe.ipv4.new, &foe.ipv4.orig, sizeof(foe.ipv4.new));
-+		memcpy(&flow_info->data.ipv4.new, &flow_info->data.ipv4.orig,
-+		       sizeof(flow_info->data.ipv4.new));
- 	else if (type >= MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T && l2->etype == ETH_P_IP)
- 		l2->etype = ETH_P_IPV6;
- 
--	*mtk_foe_entry_ib2(ppe->eth, &foe) = entry->data.bridge.ib2;
-+	*mtk_foe_entry_ib2(ppe->eth, &flow_info->data) = entry->data.bridge.ib2;
- 
--	__mtk_foe_entry_commit(ppe, &foe, hash);
-+	__mtk_foe_entry_commit(ppe, &flow_info->data, hash);
- }
- 
- void __mtk_ppe_check_skb(struct mtk_ppe *ppe, struct sk_buff *skb, u16 hash)
-@@ -738,9 +730,11 @@ void __mtk_ppe_check_skb(struct mtk_ppe
- 	struct mtk_foe_entry *hwe = mtk_foe_get_entry(ppe, hash);
- 	struct mtk_flow_entry *entry;
- 	struct mtk_foe_bridge key = {};
-+	struct mtk_foe_entry foe = {};
- 	struct hlist_node *n;
- 	struct ethhdr *eh;
- 	bool found = false;
-+	int entry_len;
- 	u8 *tag;
- 
- 	spin_lock_bh(&ppe_lock);
-@@ -748,20 +742,14 @@ void __mtk_ppe_check_skb(struct mtk_ppe
- 	if (FIELD_GET(MTK_FOE_IB1_STATE, hwe->ib1) == MTK_FOE_STATE_BIND)
- 		goto out;
- 
--	hlist_for_each_entry_safe(entry, n, head, list) {
--		if (entry->type == MTK_FLOW_TYPE_L2_SUBFLOW) {
--			if (unlikely(FIELD_GET(MTK_FOE_IB1_STATE, hwe->ib1) ==
--				     MTK_FOE_STATE_BIND))
--				continue;
--
--			entry->hash = 0xffff;
--			__mtk_foe_entry_clear(ppe, entry);
--			continue;
--		}
-+	entry_len = mtk_flow_entry_match_len(ppe->eth, hwe);
-+	memcpy(&foe, hwe, entry_len);
- 
--		if (found || !mtk_flow_entry_match(ppe->eth, entry, hwe)) {
-+	hlist_for_each_entry_safe(entry, n, head, list) {
-+		if (found ||
-+		    !mtk_flow_entry_match(ppe->eth, entry, &foe, entry_len)) {
- 			if (entry->hash != 0xffff)
--				entry->hash = 0xffff;
-+				__mtk_foe_entry_clear(ppe, entry, false);
- 			continue;
- 		}
- 
-@@ -810,9 +798,17 @@ out:
- 
- int mtk_foe_entry_idle_time(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
--	mtk_flow_entry_update(ppe, entry);
-+	int idle;
-+
-+	spin_lock_bh(&ppe_lock);
-+	if (entry->type == MTK_FLOW_TYPE_L2)
-+		mtk_flow_entry_update_l2(ppe, entry);
-+	else
-+		mtk_flow_entry_update(ppe, entry);
-+	idle = __mtk_foe_entry_idle_time(ppe, entry->data.ib1);
-+	spin_unlock_bh(&ppe_lock);
- 
--	return __mtk_foe_entry_idle_time(ppe, entry->data.ib1);
-+	return idle;
- }
- 
- int mtk_ppe_prepare_reset(struct mtk_ppe *ppe)
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -286,7 +286,12 @@ enum {
- 
- struct mtk_flow_entry {
- 	union {
--		struct hlist_node list;
-+		/* regular flows + L2 subflows */
-+		struct {
-+			struct hlist_node list;
-+			struct hlist_node l2_list;
-+		};
-+		/* L2 flows */
- 		struct {
- 			struct rhash_head l2_node;
- 			struct hlist_head l2_flows;
-@@ -296,13 +301,7 @@ struct mtk_flow_entry {
- 	s8 wed_index;
- 	u8 ppe_index;
- 	u16 hash;
--	union {
--		struct mtk_foe_entry data;
--		struct {
--			struct mtk_flow_entry *base_flow;
--			struct hlist_node list;
--		} l2_data;
--	};
-+	struct mtk_foe_entry data;
- 	struct rhash_head node;
- 	unsigned long cookie;
- };
diff --git a/target/linux/generic/backport-6.1/751-04-v6.4-net-ethernet-mediatek-fix-ppe-flow-accounting-for-L2.patch b/target/linux/generic/backport-6.1/751-04-v6.4-net-ethernet-mediatek-fix-ppe-flow-accounting-for-L2.patch
deleted file mode 100644
index e20f94f1d4e5..000000000000
--- a/target/linux/generic/backport-6.1/751-04-v6.4-net-ethernet-mediatek-fix-ppe-flow-accounting-for-L2.patch
+++ /dev/null
@@ -1,342 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 23 Mar 2023 11:05:22 +0100
-Subject: [PATCH] net: ethernet: mediatek: fix ppe flow accounting for L2
- flows
-
-For L2 flows, the packet/byte counters should report the sum of the
-counters of their subflows, both current and expired.
-In order to make this work, change the way that accounting data is tracked.
-Reset counters when a flow enters bind. Once it expires (or enters unbind),
-store the last counter value in struct mtk_flow_entry.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -79,9 +79,9 @@ static int mtk_ppe_mib_wait_busy(struct
- 	int ret;
- 	u32 val;
- 
--	ret = readl_poll_timeout(ppe->base + MTK_PPE_MIB_SER_CR, val,
--				 !(val & MTK_PPE_MIB_SER_CR_ST),
--				 20, MTK_PPE_WAIT_TIMEOUT_US);
-+	ret = readl_poll_timeout_atomic(ppe->base + MTK_PPE_MIB_SER_CR, val,
-+					!(val & MTK_PPE_MIB_SER_CR_ST),
-+					20, MTK_PPE_WAIT_TIMEOUT_US);
- 
- 	if (ret)
- 		dev_err(ppe->dev, "MIB table busy");
-@@ -89,17 +89,31 @@ static int mtk_ppe_mib_wait_busy(struct
- 	return ret;
- }
- 
--static int mtk_mib_entry_read(struct mtk_ppe *ppe, u16 index, u64 *bytes, u64 *packets)
-+static inline struct mtk_foe_accounting *
-+mtk_ppe_acct_data(struct mtk_ppe *ppe, u16 index)
-+{
-+	if (!ppe->acct_table)
-+		return NULL;
-+
-+	return ppe->acct_table + index * sizeof(struct mtk_foe_accounting);
-+}
-+
-+struct mtk_foe_accounting *mtk_ppe_mib_entry_read(struct mtk_ppe *ppe, u16 index)
- {
- 	u32 val, cnt_r0, cnt_r1, cnt_r2;
-+	struct mtk_foe_accounting *acct;
- 	int ret;
- 
- 	val = FIELD_PREP(MTK_PPE_MIB_SER_CR_ADDR, index) | MTK_PPE_MIB_SER_CR_ST;
- 	ppe_w32(ppe, MTK_PPE_MIB_SER_CR, val);
- 
-+	acct = mtk_ppe_acct_data(ppe, index);
-+	if (!acct)
-+		return NULL;
-+
- 	ret = mtk_ppe_mib_wait_busy(ppe);
- 	if (ret)
--		return ret;
-+		return acct;
- 
- 	cnt_r0 = readl(ppe->base + MTK_PPE_MIB_SER_R0);
- 	cnt_r1 = readl(ppe->base + MTK_PPE_MIB_SER_R1);
-@@ -108,19 +122,19 @@ static int mtk_mib_entry_read(struct mtk
- 	if (mtk_is_netsys_v3_or_greater(ppe->eth)) {
- 		/* 64 bit for each counter */
- 		u32 cnt_r3 = readl(ppe->base + MTK_PPE_MIB_SER_R3);
--		*bytes = ((u64)cnt_r1 << 32) | cnt_r0;
--		*packets = ((u64)cnt_r3 << 32) | cnt_r2;
-+		acct->bytes += ((u64)cnt_r1 << 32) | cnt_r0;
-+		acct->packets += ((u64)cnt_r3 << 32) | cnt_r2;
- 	} else {
- 		/* 48 bit byte counter, 40 bit packet counter */
- 		u32 byte_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R0_BYTE_CNT_LOW, cnt_r0);
- 		u32 byte_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R1_BYTE_CNT_HIGH, cnt_r1);
- 		u32 pkt_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R1_PKT_CNT_LOW, cnt_r1);
- 		u32 pkt_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R2_PKT_CNT_HIGH, cnt_r2);
--		*bytes = ((u64)byte_cnt_high << 32) | byte_cnt_low;
--		*packets = (pkt_cnt_high << 16) | pkt_cnt_low;
-+		acct->bytes += ((u64)byte_cnt_high << 32) | byte_cnt_low;
-+		acct->packets += (pkt_cnt_high << 16) | pkt_cnt_low;
- 	}
- 
--	return 0;
-+	return acct;
- }
- 
- static void mtk_ppe_cache_clear(struct mtk_ppe *ppe)
-@@ -519,13 +533,6 @@ __mtk_foe_entry_clear(struct mtk_ppe *pp
- 		hwe->ib1 |= FIELD_PREP(MTK_FOE_IB1_STATE, MTK_FOE_STATE_INVALID);
- 		dma_wmb();
- 		mtk_ppe_cache_clear(ppe);
--		if (ppe->accounting) {
--			struct mtk_foe_accounting *acct;
--
--			acct = ppe->acct_table + entry->hash * sizeof(*acct);
--			acct->packets = 0;
--			acct->bytes = 0;
--		}
- 	}
- 	entry->hash = 0xffff;
- 
-@@ -550,11 +557,14 @@ static int __mtk_foe_entry_idle_time(str
- }
- 
- static bool
--mtk_flow_entry_update(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
-+mtk_flow_entry_update(struct mtk_ppe *ppe, struct mtk_flow_entry *entry,
-+		      u64 *packets, u64 *bytes)
- {
-+	struct mtk_foe_accounting *acct;
- 	struct mtk_foe_entry foe = {};
- 	struct mtk_foe_entry *hwe;
- 	u16 hash = entry->hash;
-+	bool ret = false;
- 	int len;
- 
- 	if (hash == 0xffff)
-@@ -565,18 +575,35 @@ mtk_flow_entry_update(struct mtk_ppe *pp
- 	memcpy(&foe, hwe, len);
- 
- 	if (!mtk_flow_entry_match(ppe->eth, entry, &foe, len) ||
--	    FIELD_GET(MTK_FOE_IB1_STATE, foe.ib1) != MTK_FOE_STATE_BIND)
--		return false;
-+	    FIELD_GET(MTK_FOE_IB1_STATE, foe.ib1) != MTK_FOE_STATE_BIND) {
-+		acct = mtk_ppe_acct_data(ppe, hash);
-+		if (acct) {
-+			entry->prev_packets += acct->packets;
-+			entry->prev_bytes += acct->bytes;
-+		}
-+
-+		goto out;
-+	}
- 
- 	entry->data.ib1 = foe.ib1;
-+	acct = mtk_ppe_mib_entry_read(ppe, hash);
-+	ret = true;
-+
-+out:
-+	if (acct) {
-+		*packets += acct->packets;
-+		*bytes += acct->bytes;
-+	}
- 
--	return true;
-+	return ret;
- }
- 
- static void
- mtk_flow_entry_update_l2(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
- {
- 	u32 ib1_ts_mask = mtk_get_ib1_ts_mask(ppe->eth);
-+	u64 *packets = &entry->packets;
-+	u64 *bytes = &entry->bytes;
- 	struct mtk_flow_entry *cur;
- 	struct hlist_node *tmp;
- 	int idle;
-@@ -585,7 +612,9 @@ mtk_flow_entry_update_l2(struct mtk_ppe
- 	hlist_for_each_entry_safe(cur, tmp, &entry->l2_flows, l2_list) {
- 		int cur_idle;
- 
--		if (!mtk_flow_entry_update(ppe, cur)) {
-+		if (!mtk_flow_entry_update(ppe, cur, packets, bytes)) {
-+			entry->prev_packets += cur->prev_packets;
-+			entry->prev_bytes += cur->prev_bytes;
- 			__mtk_foe_entry_clear(ppe, entry, false);
- 			continue;
- 		}
-@@ -600,10 +629,29 @@ mtk_flow_entry_update_l2(struct mtk_ppe
- 	}
- }
- 
-+void mtk_foe_entry_get_stats(struct mtk_ppe *ppe, struct mtk_flow_entry *entry,
-+			     int *idle)
-+{
-+	entry->packets = entry->prev_packets;
-+	entry->bytes = entry->prev_bytes;
-+
-+	spin_lock_bh(&ppe_lock);
-+
-+	if (entry->type == MTK_FLOW_TYPE_L2)
-+		mtk_flow_entry_update_l2(ppe, entry);
-+	else
-+		mtk_flow_entry_update(ppe, entry, &entry->packets, &entry->bytes);
-+
-+	*idle = __mtk_foe_entry_idle_time(ppe, entry->data.ib1);
-+
-+	spin_unlock_bh(&ppe_lock);
-+}
-+
- static void
- __mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_foe_entry *entry,
- 		       u16 hash)
- {
-+	struct mtk_foe_accounting *acct;
- 	struct mtk_eth *eth = ppe->eth;
- 	u16 timestamp = mtk_eth_timestamp(eth);
- 	struct mtk_foe_entry *hwe;
-@@ -634,6 +682,12 @@ __mtk_foe_entry_commit(struct mtk_ppe *p
- 
- 	dma_wmb();
- 
-+	acct = mtk_ppe_mib_entry_read(ppe, hash);
-+	if (acct) {
-+		acct->packets = 0;
-+		acct->bytes = 0;
-+	}
-+
- 	mtk_ppe_cache_clear(ppe);
- }
- 
-@@ -796,21 +850,6 @@ out:
- 	spin_unlock_bh(&ppe_lock);
- }
- 
--int mtk_foe_entry_idle_time(struct mtk_ppe *ppe, struct mtk_flow_entry *entry)
--{
--	int idle;
--
--	spin_lock_bh(&ppe_lock);
--	if (entry->type == MTK_FLOW_TYPE_L2)
--		mtk_flow_entry_update_l2(ppe, entry);
--	else
--		mtk_flow_entry_update(ppe, entry);
--	idle = __mtk_foe_entry_idle_time(ppe, entry->data.ib1);
--	spin_unlock_bh(&ppe_lock);
--
--	return idle;
--}
--
- int mtk_ppe_prepare_reset(struct mtk_ppe *ppe)
- {
- 	if (!ppe)
-@@ -838,32 +877,6 @@ int mtk_ppe_prepare_reset(struct mtk_ppe
- 	return mtk_ppe_wait_busy(ppe);
- }
- 
--struct mtk_foe_accounting *mtk_foe_entry_get_mib(struct mtk_ppe *ppe, u32 index,
--						 struct mtk_foe_accounting *diff)
--{
--	struct mtk_foe_accounting *acct;
--	int size = sizeof(struct mtk_foe_accounting);
--	u64 bytes, packets;
--
--	if (!ppe->accounting)
--		return NULL;
--
--	if (mtk_mib_entry_read(ppe, index, &bytes, &packets))
--		return NULL;
--
--	acct = ppe->acct_table + index * size;
--
--	acct->bytes += bytes;
--	acct->packets += packets;
--
--	if (diff) {
--		diff->bytes = bytes;
--		diff->packets = packets;
--	}
--
--	return acct;
--}
--
- struct mtk_ppe *mtk_ppe_init(struct mtk_eth *eth, void __iomem *base, int index)
- {
- 	bool accounting = eth->soc->has_accounting;
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -304,6 +304,8 @@ struct mtk_flow_entry {
- 	struct mtk_foe_entry data;
- 	struct rhash_head node;
- 	unsigned long cookie;
-+	u64 prev_packets, prev_bytes;
-+	u64 packets, bytes;
- };
- 
- struct mtk_mib_entry {
-@@ -348,6 +350,7 @@ void mtk_ppe_deinit(struct mtk_eth *eth)
- void mtk_ppe_start(struct mtk_ppe *ppe);
- int mtk_ppe_stop(struct mtk_ppe *ppe);
- int mtk_ppe_prepare_reset(struct mtk_ppe *ppe);
-+struct mtk_foe_accounting *mtk_ppe_mib_entry_read(struct mtk_ppe *ppe, u16 index);
- 
- void __mtk_ppe_check_skb(struct mtk_ppe *ppe, struct sk_buff *skb, u16 hash);
- 
-@@ -396,9 +399,8 @@ int mtk_foe_entry_set_queue(struct mtk_e
- 			    unsigned int queue);
- int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
- void mtk_foe_entry_clear(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
--int mtk_foe_entry_idle_time(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
- int mtk_ppe_debugfs_init(struct mtk_ppe *ppe, int index);
--struct mtk_foe_accounting *mtk_foe_entry_get_mib(struct mtk_ppe *ppe, u32 index,
--						 struct mtk_foe_accounting *diff);
-+void mtk_foe_entry_get_stats(struct mtk_ppe *ppe, struct mtk_flow_entry *entry,
-+			     int *idle);
- 
- #endif
---- a/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
-@@ -96,7 +96,7 @@ mtk_ppe_debugfs_foe_show(struct seq_file
- 		if (bind && state != MTK_FOE_STATE_BIND)
- 			continue;
- 
--		acct = mtk_foe_entry_get_mib(ppe, i, NULL);
-+		acct = mtk_ppe_mib_entry_read(ppe, i);
- 
- 		type = mtk_get_ib1_pkt_type(ppe->eth, entry->ib1);
- 		seq_printf(m, "%05x %s %7s", i,
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -501,24 +501,21 @@ static int
- mtk_flow_offload_stats(struct mtk_eth *eth, struct flow_cls_offload *f)
- {
- 	struct mtk_flow_entry *entry;
--	struct mtk_foe_accounting diff;
--	u32 idle;
-+	u64 packets, bytes;
-+	int idle;
- 
- 	entry = rhashtable_lookup(&eth->flow_table, &f->cookie,
- 				  mtk_flow_ht_params);
- 	if (!entry)
- 		return -ENOENT;
- 
--	idle = mtk_foe_entry_idle_time(eth->ppe[entry->ppe_index], entry);
-+	packets = entry->packets;
-+	bytes = entry->bytes;
-+	mtk_foe_entry_get_stats(eth->ppe[entry->ppe_index], entry, &idle);
-+	f->stats.pkts += entry->packets - packets;
-+	f->stats.bytes += entry->bytes - bytes;
- 	f->stats.lastused = jiffies - idle * HZ;
- 
--	if (entry->hash != 0xFFFF &&
--	    mtk_foe_entry_get_mib(eth->ppe[entry->ppe_index], entry->hash,
--				  &diff)) {
--		f->stats.pkts += diff.packets;
--		f->stats.bytes += diff.bytes;
--	}
--
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-6.1/752-01-v6.6-net-ethernet-mtk_wed-add-some-more-info-in-wed_txinf.patch b/target/linux/generic/backport-6.1/752-01-v6.6-net-ethernet-mtk_wed-add-some-more-info-in-wed_txinf.patch
deleted file mode 100644
index a224b626243c..000000000000
--- a/target/linux/generic/backport-6.1/752-01-v6.6-net-ethernet-mtk_wed-add-some-more-info-in-wed_txinf.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sun, 27 Aug 2023 19:31:41 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: add some more info in wed_txinfo_show
- handler
-
-Add some new info in Wireless Ethernet Dispatcher wed_txinfo_show
-debugfs handler useful during debugging.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Link: https://lore.kernel.org/r/3390292655d568180b73d2a25576f61aa63310e5.1693157377.git.lorenzo@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-@@ -127,8 +127,17 @@ wed_txinfo_show(struct seq_file *s, void
- 		DUMP_WDMA_RING(WDMA_RING_RX(0)),
- 		DUMP_WDMA_RING(WDMA_RING_RX(1)),
- 
--		DUMP_STR("TX FREE"),
-+		DUMP_STR("WED TX FREE"),
- 		DUMP_WED(WED_RX_MIB(0)),
-+		DUMP_WED_RING(WED_RING_RX(0)),
-+		DUMP_WED(WED_WPDMA_RX_COHERENT_MIB(0)),
-+		DUMP_WED(WED_RX_MIB(1)),
-+		DUMP_WED_RING(WED_RING_RX(1)),
-+		DUMP_WED(WED_WPDMA_RX_COHERENT_MIB(1)),
-+
-+		DUMP_STR("WED WPDMA TX FREE"),
-+		DUMP_WED_RING(WED_WPDMA_RING_RX(0)),
-+		DUMP_WED_RING(WED_WPDMA_RING_RX(1)),
- 	};
- 	struct mtk_wed_hw *hw = s->private;
- 	struct mtk_wed_device *dev = hw->wed_dev;
---- a/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -266,6 +266,8 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_WPDMA_TX_MIB(_n)			(0x5a0 + (_n) * 4)
- #define MTK_WED_WPDMA_TX_COHERENT_MIB(_n)		(0x5d0 + (_n) * 4)
-+#define MTK_WED_WPDMA_RX_MIB(_n)			(0x5e0 + (_n) * 4)
-+#define MTK_WED_WPDMA_RX_COHERENT_MIB(_n)		(0x5f0 + (_n) * 4)
- 
- #define MTK_WED_WPDMA_RING_TX(_n)			(0x600 + (_n) * 0x10)
- #define MTK_WED_WPDMA_RING_RX(_n)			(0x700 + (_n) * 0x10)
diff --git a/target/linux/generic/backport-6.1/752-02-v6.6-net-ethernet-mtk_wed-minor-change-in-wed_-tx-rx-info.patch b/target/linux/generic/backport-6.1/752-02-v6.6-net-ethernet-mtk_wed-minor-change-in-wed_-tx-rx-info.patch
deleted file mode 100644
index df6edfdf9433..000000000000
--- a/target/linux/generic/backport-6.1/752-02-v6.6-net-ethernet-mtk_wed-minor-change-in-wed_-tx-rx-info.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sun, 27 Aug 2023 19:33:47 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
-
-No functional changes, just cosmetic ones.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Link: https://lore.kernel.org/r/71e046c72a978745f0435af265dda610aa9bfbcf.1693157578.git.lorenzo@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-@@ -84,7 +84,6 @@ dump_wed_regs(struct seq_file *s, struct
- 	}
- }
- 
--
- static int
- wed_txinfo_show(struct seq_file *s, void *data)
- {
-@@ -142,10 +141,8 @@ wed_txinfo_show(struct seq_file *s, void
- 	struct mtk_wed_hw *hw = s->private;
- 	struct mtk_wed_device *dev = hw->wed_dev;
- 
--	if (!dev)
--		return 0;
--
--	dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
-+	if (dev)
-+		dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
- 
- 	return 0;
- }
-@@ -217,10 +214,8 @@ wed_rxinfo_show(struct seq_file *s, void
- 	struct mtk_wed_hw *hw = s->private;
- 	struct mtk_wed_device *dev = hw->wed_dev;
- 
--	if (!dev)
--		return 0;
--
--	dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
-+	if (dev)
-+		dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-6.1/752-03-v6.6-net-ethernet-mtk_eth_soc-rely-on-mtk_pse_port-defini.patch b/target/linux/generic/backport-6.1/752-03-v6.6-net-ethernet-mtk_eth_soc-rely-on-mtk_pse_port-defini.patch
deleted file mode 100644
index 0bf9dea24f0a..000000000000
--- a/target/linux/generic/backport-6.1/752-03-v6.6-net-ethernet-mtk_eth_soc-rely-on-mtk_pse_port-defini.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Tue, 12 Sep 2023 10:22:56 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: rely on mtk_pse_port definitions
- in mtk_flow_set_output_device
-
-Similar to ethernet ports, rely on mtk_pse_port definitions for
-pse wdma ports as well.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Link: https://lore.kernel.org/r/b86bdb717e963e3246c1dec5f736c810703cf056.1694506814.git.lorenzo@kernel.org
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -196,10 +196,10 @@ mtk_flow_set_output_device(struct mtk_et
- 		if (mtk_is_netsys_v2_or_greater(eth)) {
- 			switch (info.wdma_idx) {
- 			case 0:
--				pse_port = 8;
-+				pse_port = PSE_WDMA0_PORT;
- 				break;
- 			case 1:
--				pse_port = 9;
-+				pse_port = PSE_WDMA1_PORT;
- 				break;
- 			default:
- 				return -EINVAL;
diff --git a/target/linux/generic/backport-6.1/752-04-v6.6-net-ethernet-mtk_wed-check-update_wo_rx_stats-in-mtk.patch b/target/linux/generic/backport-6.1/752-04-v6.6-net-ethernet-mtk_wed-check-update_wo_rx_stats-in-mtk.patch
deleted file mode 100644
index c99e1334d41e..000000000000
--- a/target/linux/generic/backport-6.1/752-04-v6.6-net-ethernet-mtk_wed-check-update_wo_rx_stats-in-mtk.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Tue, 12 Sep 2023 10:28:00 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: check update_wo_rx_stats in
- mtk_wed_update_rx_stats()
-
-Check if update_wo_rx_stats function pointer is properly set in
-mtk_wed_update_rx_stats routine before accessing it.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Link: https://lore.kernel.org/r/b0d233386e059bccb59f18f69afb79a7806e5ded.1694507226.git.lorenzo@kernel.org
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -68,6 +68,9 @@ mtk_wed_update_rx_stats(struct mtk_wed_d
- 	struct mtk_wed_wo_rx_stats *stats;
- 	int i;
- 
-+	if (!wed->wlan.update_wo_rx_stats)
-+		return;
-+
- 	if (count * sizeof(*stats) > skb->len - sizeof(u32))
- 		return;
- 
diff --git a/target/linux/generic/backport-6.1/752-05-v6.7-net-ethernet-mtk_wed-do-not-assume-offload-callbacks.patch b/target/linux/generic/backport-6.1/752-05-v6.7-net-ethernet-mtk_wed-do-not-assume-offload-callbacks.patch
deleted file mode 100644
index cd7fb92e2090..000000000000
--- a/target/linux/generic/backport-6.1/752-05-v6.7-net-ethernet-mtk_wed-do-not-assume-offload-callbacks.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Wed, 13 Sep 2023 20:42:47 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: do not assume offload callbacks are
- always set
-
-Check if wlan.offload_enable and wlan.offload_disable callbacks are set
-in mtk_wed_flow_add/mtk_wed_flow_remove since mt7996 will not rely
-on them.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -1712,19 +1712,20 @@ mtk_wed_irq_set_mask(struct mtk_wed_devi
- int mtk_wed_flow_add(int index)
- {
- 	struct mtk_wed_hw *hw = hw_list[index];
--	int ret;
-+	int ret = 0;
- 
--	if (!hw || !hw->wed_dev)
--		return -ENODEV;
-+	mutex_lock(&hw_lock);
- 
--	if (hw->num_flows) {
--		hw->num_flows++;
--		return 0;
-+	if (!hw || !hw->wed_dev) {
-+		ret = -ENODEV;
-+		goto out;
- 	}
- 
--	mutex_lock(&hw_lock);
--	if (!hw->wed_dev) {
--		ret = -ENODEV;
-+	if (!hw->wed_dev->wlan.offload_enable)
-+		goto out;
-+
-+	if (hw->num_flows) {
-+		hw->num_flows++;
- 		goto out;
- 	}
- 
-@@ -1743,14 +1744,15 @@ void mtk_wed_flow_remove(int index)
- {
- 	struct mtk_wed_hw *hw = hw_list[index];
- 
--	if (!hw)
--		return;
-+	mutex_lock(&hw_lock);
- 
--	if (--hw->num_flows)
--		return;
-+	if (!hw || !hw->wed_dev)
-+		goto out;
- 
--	mutex_lock(&hw_lock);
--	if (!hw->wed_dev)
-+	if (!hw->wed_dev->wlan.offload_disable)
-+		goto out;
-+
-+	if (--hw->num_flows)
- 		goto out;
- 
- 	hw->wed_dev->wlan.offload_disable(hw->wed_dev);
diff --git a/target/linux/generic/backport-6.1/752-06-v6.7-net-ethernet-mtk_wed-introduce-versioning-utility-ro.patch b/target/linux/generic/backport-6.1/752-06-v6.7-net-ethernet-mtk_wed-introduce-versioning-utility-ro.patch
deleted file mode 100644
index 294818865033..000000000000
--- a/target/linux/generic/backport-6.1/752-06-v6.7-net-ethernet-mtk_wed-introduce-versioning-utility-ro.patch
+++ /dev/null
@@ -1,232 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 18 Sep 2023 12:29:05 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: introduce versioning utility routines
-
-Similar to mtk_eth_soc, introduce the following wed versioning
-utility routines:
-- mtk_wed_is_v1
-- mtk_wed_is_v2
-
-This is a preliminary patch to introduce WED support for MT7988 SoC
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -277,7 +277,7 @@ mtk_wed_assign(struct mtk_wed_device *de
- 		if (!hw->wed_dev)
- 			goto out;
- 
--		if (hw->version == 1)
-+		if (mtk_wed_is_v1(hw))
- 			return NULL;
- 
- 		/* MT7986 WED devices do not have any pcie slot restrictions */
-@@ -358,7 +358,7 @@ mtk_wed_tx_buffer_alloc(struct mtk_wed_d
- 			desc->buf0 = cpu_to_le32(buf_phys);
- 			desc->buf1 = cpu_to_le32(buf_phys + txd_size);
- 
--			if (dev->hw->version == 1)
-+			if (mtk_wed_is_v1(dev->hw))
- 				ctrl = FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN0, txd_size) |
- 				       FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN1,
- 						  MTK_WED_BUF_SIZE - txd_size) |
-@@ -497,7 +497,7 @@ mtk_wed_set_ext_int(struct mtk_wed_devic
- {
- 	u32 mask = MTK_WED_EXT_INT_STATUS_ERROR_MASK;
- 
--	if (dev->hw->version == 1)
-+	if (mtk_wed_is_v1(dev->hw))
- 		mask |= MTK_WED_EXT_INT_STATUS_TX_DRV_R_RESP_ERR;
- 	else
- 		mask |= MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH |
-@@ -576,7 +576,7 @@ mtk_wed_dma_disable(struct mtk_wed_devic
- 		 MTK_WDMA_GLO_CFG_RX_INFO1_PRERES |
- 		 MTK_WDMA_GLO_CFG_RX_INFO2_PRERES);
- 
--	if (dev->hw->version == 1) {
-+	if (mtk_wed_is_v1(dev->hw)) {
- 		regmap_write(dev->hw->mirror, dev->hw->index * 4, 0);
- 		wdma_clr(dev, MTK_WDMA_GLO_CFG,
- 			 MTK_WDMA_GLO_CFG_RX_INFO3_PRERES);
-@@ -605,7 +605,7 @@ mtk_wed_stop(struct mtk_wed_device *dev)
- 	wdma_w32(dev, MTK_WDMA_INT_GRP2, 0);
- 	wed_w32(dev, MTK_WED_WPDMA_INT_MASK, 0);
- 
--	if (dev->hw->version == 1)
-+	if (mtk_wed_is_v1(dev->hw))
- 		return;
- 
- 	wed_w32(dev, MTK_WED_EXT_INT_MASK1, 0);
-@@ -624,7 +624,7 @@ mtk_wed_deinit(struct mtk_wed_device *de
- 		MTK_WED_CTRL_WED_TX_BM_EN |
- 		MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
- 
--	if (dev->hw->version == 1)
-+	if (mtk_wed_is_v1(dev->hw))
- 		return;
- 
- 	wed_clr(dev, MTK_WED_CTRL,
-@@ -730,7 +730,7 @@ mtk_wed_bus_init(struct mtk_wed_device *
- static void
- mtk_wed_set_wpdma(struct mtk_wed_device *dev)
- {
--	if (dev->hw->version == 1) {
-+	if (mtk_wed_is_v1(dev->hw)) {
- 		wed_w32(dev, MTK_WED_WPDMA_CFG_BASE,  dev->wlan.wpdma_phys);
- 	} else {
- 		mtk_wed_bus_init(dev);
-@@ -761,7 +761,7 @@ mtk_wed_hw_init_early(struct mtk_wed_dev
- 	      MTK_WED_WDMA_GLO_CFG_IDLE_DMAD_SUPPLY;
- 	wed_m32(dev, MTK_WED_WDMA_GLO_CFG, mask, set);
- 
--	if (dev->hw->version == 1) {
-+	if (mtk_wed_is_v1(dev->hw)) {
- 		u32 offset = dev->hw->index ? 0x04000400 : 0;
- 
- 		wdma_set(dev, MTK_WDMA_GLO_CFG,
-@@ -934,7 +934,7 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 
- 	wed_w32(dev, MTK_WED_TX_BM_BUF_LEN, MTK_WED_PKT_SIZE);
- 
--	if (dev->hw->version == 1) {
-+	if (mtk_wed_is_v1(dev->hw)) {
- 		wed_w32(dev, MTK_WED_TX_BM_TKID,
- 			FIELD_PREP(MTK_WED_TX_BM_TKID_START,
- 				   dev->wlan.token_start) |
-@@ -967,7 +967,7 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 
- 	mtk_wed_reset(dev, MTK_WED_RESET_TX_BM);
- 
--	if (dev->hw->version == 1) {
-+	if (mtk_wed_is_v1(dev->hw)) {
- 		wed_set(dev, MTK_WED_CTRL,
- 			MTK_WED_CTRL_WED_TX_BM_EN |
- 			MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
-@@ -1217,7 +1217,7 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 	}
- 
- 	dev->init_done = false;
--	if (dev->hw->version == 1)
-+	if (mtk_wed_is_v1(dev->hw))
- 		return;
- 
- 	if (!busy) {
-@@ -1343,7 +1343,7 @@ mtk_wed_configure_irq(struct mtk_wed_dev
- 		MTK_WED_CTRL_WED_TX_BM_EN |
- 		MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
- 
--	if (dev->hw->version == 1) {
-+	if (mtk_wed_is_v1(dev->hw)) {
- 		wed_w32(dev, MTK_WED_PCIE_INT_TRIGGER,
- 			MTK_WED_PCIE_INT_TRIGGER_STATUS);
- 
-@@ -1416,7 +1416,7 @@ mtk_wed_dma_enable(struct mtk_wed_device
- 		 MTK_WDMA_GLO_CFG_RX_INFO1_PRERES |
- 		 MTK_WDMA_GLO_CFG_RX_INFO2_PRERES);
- 
--	if (dev->hw->version == 1) {
-+	if (mtk_wed_is_v1(dev->hw)) {
- 		wdma_set(dev, MTK_WDMA_GLO_CFG,
- 			 MTK_WDMA_GLO_CFG_RX_INFO3_PRERES);
- 	} else {
-@@ -1465,7 +1465,7 @@ mtk_wed_start(struct mtk_wed_device *dev
- 
- 	mtk_wed_set_ext_int(dev, true);
- 
--	if (dev->hw->version == 1) {
-+	if (mtk_wed_is_v1(dev->hw)) {
- 		u32 val = dev->wlan.wpdma_phys | MTK_PCIE_MIRROR_MAP_EN |
- 			  FIELD_PREP(MTK_PCIE_MIRROR_MAP_WED_ID,
- 				     dev->hw->index);
-@@ -1550,7 +1550,7 @@ mtk_wed_attach(struct mtk_wed_device *de
- 	}
- 
- 	mtk_wed_hw_init_early(dev);
--	if (hw->version == 1) {
-+	if (mtk_wed_is_v1(hw)) {
- 		regmap_update_bits(hw->hifsys, HIFSYS_DMA_AG_MAP,
- 				   BIT(hw->index), 0);
- 	} else {
-@@ -1618,7 +1618,7 @@ static int
- mtk_wed_txfree_ring_setup(struct mtk_wed_device *dev, void __iomem *regs)
- {
- 	struct mtk_wed_ring *ring = &dev->txfree_ring;
--	int i, index = dev->hw->version == 1;
-+	int i, index = mtk_wed_is_v1(dev->hw);
- 
- 	/*
- 	 * For txfree event handling, the same DMA ring is shared between WED
-@@ -1676,7 +1676,7 @@ mtk_wed_irq_get(struct mtk_wed_device *d
- {
- 	u32 val, ext_mask = MTK_WED_EXT_INT_STATUS_ERROR_MASK;
- 
--	if (dev->hw->version == 1)
-+	if (mtk_wed_is_v1(dev->hw))
- 		ext_mask |= MTK_WED_EXT_INT_STATUS_TX_DRV_R_RESP_ERR;
- 	else
- 		ext_mask |= MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH |
-@@ -1843,7 +1843,7 @@ mtk_wed_setup_tc(struct mtk_wed_device *
- {
- 	struct mtk_wed_hw *hw = wed->hw;
- 
--	if (hw->version < 2)
-+	if (mtk_wed_is_v1(hw))
- 		return -EOPNOTSUPP;
- 
- 	switch (type) {
-@@ -1917,9 +1917,9 @@ void mtk_wed_add_hw(struct device_node *
- 	hw->wdma = wdma;
- 	hw->index = index;
- 	hw->irq = irq;
--	hw->version = mtk_is_netsys_v1(eth) ? 1 : 2;
-+	hw->version = eth->soc->version;
- 
--	if (hw->version == 1) {
-+	if (mtk_wed_is_v1(hw)) {
- 		hw->mirror = syscon_regmap_lookup_by_phandle(eth_np,
- 				"mediatek,pcie-mirror");
- 		hw->hifsys = syscon_regmap_lookup_by_phandle(eth_np,
---- a/drivers/net/ethernet/mediatek/mtk_wed.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.h
-@@ -40,6 +40,16 @@ struct mtk_wdma_info {
- };
- 
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
-+static inline bool mtk_wed_is_v1(struct mtk_wed_hw *hw)
-+{
-+	return hw->version == 1;
-+}
-+
-+static inline bool mtk_wed_is_v2(struct mtk_wed_hw *hw)
-+{
-+	return hw->version == 2;
-+}
-+
- static inline void
- wed_w32(struct mtk_wed_device *dev, u32 reg, u32 val)
- {
---- a/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-@@ -263,7 +263,7 @@ void mtk_wed_hw_add_debugfs(struct mtk_w
- 	debugfs_create_u32("regidx", 0600, dir, &hw->debugfs_reg);
- 	debugfs_create_file_unsafe("regval", 0600, dir, hw, &fops_regval);
- 	debugfs_create_file_unsafe("txinfo", 0400, dir, hw, &wed_txinfo_fops);
--	if (hw->version != 1)
-+	if (!mtk_wed_is_v1(hw))
- 		debugfs_create_file_unsafe("rxinfo", 0400, dir, hw,
- 					   &wed_rxinfo_fops);
- }
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -207,7 +207,7 @@ int mtk_wed_mcu_msg_update(struct mtk_we
- {
- 	struct mtk_wed_wo *wo = dev->hw->wed_wo;
- 
--	if (dev->hw->version == 1)
-+	if (mtk_wed_is_v1(dev->hw))
- 		return 0;
- 
- 	if (WARN_ON(!wo))
diff --git a/target/linux/generic/backport-6.1/752-07-v6.7-net-ethernet-mtk_wed-do-not-configure-rx-offload-if-.patch b/target/linux/generic/backport-6.1/752-07-v6.7-net-ethernet-mtk_wed-do-not-configure-rx-offload-if-.patch
deleted file mode 100644
index bc34aa33a9f2..000000000000
--- a/target/linux/generic/backport-6.1/752-07-v6.7-net-ethernet-mtk_wed-do-not-configure-rx-offload-if-.patch
+++ /dev/null
@@ -1,234 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 18 Sep 2023 12:29:06 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: do not configure rx offload if not
- supported
-
-Check if rx offload is supported running mtk_wed_get_rx_capa routine
-before configuring it. This is a preliminary patch to introduce Wireless
-Ethernet Dispatcher (WED) support for MT7988 SoC.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -605,7 +605,7 @@ mtk_wed_stop(struct mtk_wed_device *dev)
- 	wdma_w32(dev, MTK_WDMA_INT_GRP2, 0);
- 	wed_w32(dev, MTK_WED_WPDMA_INT_MASK, 0);
- 
--	if (mtk_wed_is_v1(dev->hw))
-+	if (!mtk_wed_get_rx_capa(dev))
- 		return;
- 
- 	wed_w32(dev, MTK_WED_EXT_INT_MASK1, 0);
-@@ -732,16 +732,21 @@ mtk_wed_set_wpdma(struct mtk_wed_device
- {
- 	if (mtk_wed_is_v1(dev->hw)) {
- 		wed_w32(dev, MTK_WED_WPDMA_CFG_BASE,  dev->wlan.wpdma_phys);
--	} else {
--		mtk_wed_bus_init(dev);
--
--		wed_w32(dev, MTK_WED_WPDMA_CFG_BASE, dev->wlan.wpdma_int);
--		wed_w32(dev, MTK_WED_WPDMA_CFG_INT_MASK, dev->wlan.wpdma_mask);
--		wed_w32(dev, MTK_WED_WPDMA_CFG_TX, dev->wlan.wpdma_tx);
--		wed_w32(dev, MTK_WED_WPDMA_CFG_TX_FREE, dev->wlan.wpdma_txfree);
--		wed_w32(dev, MTK_WED_WPDMA_RX_GLO_CFG, dev->wlan.wpdma_rx_glo);
--		wed_w32(dev, MTK_WED_WPDMA_RX_RING, dev->wlan.wpdma_rx);
-+		return;
- 	}
-+
-+	mtk_wed_bus_init(dev);
-+
-+	wed_w32(dev, MTK_WED_WPDMA_CFG_BASE, dev->wlan.wpdma_int);
-+	wed_w32(dev, MTK_WED_WPDMA_CFG_INT_MASK, dev->wlan.wpdma_mask);
-+	wed_w32(dev, MTK_WED_WPDMA_CFG_TX, dev->wlan.wpdma_tx);
-+	wed_w32(dev, MTK_WED_WPDMA_CFG_TX_FREE, dev->wlan.wpdma_txfree);
-+
-+	if (!mtk_wed_get_rx_capa(dev))
-+		return;
-+
-+	wed_w32(dev, MTK_WED_WPDMA_RX_GLO_CFG, dev->wlan.wpdma_rx_glo);
-+	wed_w32(dev, MTK_WED_WPDMA_RX_RING, dev->wlan.wpdma_rx);
- }
- 
- static void
-@@ -973,15 +978,17 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 			MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
- 	} else {
- 		wed_clr(dev, MTK_WED_TX_TKID_CTRL, MTK_WED_TX_TKID_CTRL_PAUSE);
--		/* rx hw init */
--		wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX,
--			MTK_WED_WPDMA_RX_D_RST_CRX_IDX |
--			MTK_WED_WPDMA_RX_D_RST_DRV_IDX);
--		wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX, 0);
--
--		mtk_wed_rx_buffer_hw_init(dev);
--		mtk_wed_rro_hw_init(dev);
--		mtk_wed_route_qm_hw_init(dev);
-+		if (mtk_wed_get_rx_capa(dev)) {
-+			/* rx hw init */
-+			wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX,
-+				MTK_WED_WPDMA_RX_D_RST_CRX_IDX |
-+				MTK_WED_WPDMA_RX_D_RST_DRV_IDX);
-+			wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX, 0);
-+
-+			mtk_wed_rx_buffer_hw_init(dev);
-+			mtk_wed_rro_hw_init(dev);
-+			mtk_wed_route_qm_hw_init(dev);
-+		}
- 	}
- 
- 	wed_clr(dev, MTK_WED_TX_BM_CTRL, MTK_WED_TX_BM_CTRL_PAUSE);
-@@ -1353,8 +1360,6 @@ mtk_wed_configure_irq(struct mtk_wed_dev
- 
- 		wed_clr(dev, MTK_WED_WDMA_INT_CTRL, wdma_mask);
- 	} else {
--		wdma_mask |= FIELD_PREP(MTK_WDMA_INT_MASK_TX_DONE,
--					GENMASK(1, 0));
- 		/* initail tx interrupt trigger */
- 		wed_w32(dev, MTK_WED_WPDMA_INT_CTRL_TX,
- 			MTK_WED_WPDMA_INT_CTRL_TX0_DONE_EN |
-@@ -1373,15 +1378,20 @@ mtk_wed_configure_irq(struct mtk_wed_dev
- 			FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_TX_FREE_DONE_TRIG,
- 				   dev->wlan.txfree_tbit));
- 
--		wed_w32(dev, MTK_WED_WPDMA_INT_CTRL_RX,
--			MTK_WED_WPDMA_INT_CTRL_RX0_EN |
--			MTK_WED_WPDMA_INT_CTRL_RX0_CLR |
--			MTK_WED_WPDMA_INT_CTRL_RX1_EN |
--			MTK_WED_WPDMA_INT_CTRL_RX1_CLR |
--			FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RX0_DONE_TRIG,
--				   dev->wlan.rx_tbit[0]) |
--			FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RX1_DONE_TRIG,
--				   dev->wlan.rx_tbit[1]));
-+		if (mtk_wed_get_rx_capa(dev)) {
-+			wed_w32(dev, MTK_WED_WPDMA_INT_CTRL_RX,
-+				MTK_WED_WPDMA_INT_CTRL_RX0_EN |
-+				MTK_WED_WPDMA_INT_CTRL_RX0_CLR |
-+				MTK_WED_WPDMA_INT_CTRL_RX1_EN |
-+				MTK_WED_WPDMA_INT_CTRL_RX1_CLR |
-+				FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RX0_DONE_TRIG,
-+					   dev->wlan.rx_tbit[0]) |
-+				FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RX1_DONE_TRIG,
-+					   dev->wlan.rx_tbit[1]));
-+
-+			wdma_mask |= FIELD_PREP(MTK_WDMA_INT_MASK_TX_DONE,
-+						GENMASK(1, 0));
-+		}
- 
- 		wed_w32(dev, MTK_WED_WDMA_INT_CLR, wdma_mask);
- 		wed_set(dev, MTK_WED_WDMA_INT_CTRL,
-@@ -1400,6 +1410,8 @@ mtk_wed_configure_irq(struct mtk_wed_dev
- static void
- mtk_wed_dma_enable(struct mtk_wed_device *dev)
- {
-+	int i;
-+
- 	wed_set(dev, MTK_WED_WPDMA_INT_CTRL, MTK_WED_WPDMA_INT_CTRL_SUBRT_ADV);
- 
- 	wed_set(dev, MTK_WED_GLO_CFG,
-@@ -1419,33 +1431,33 @@ mtk_wed_dma_enable(struct mtk_wed_device
- 	if (mtk_wed_is_v1(dev->hw)) {
- 		wdma_set(dev, MTK_WDMA_GLO_CFG,
- 			 MTK_WDMA_GLO_CFG_RX_INFO3_PRERES);
--	} else {
--		int i;
-+		return;
-+	}
- 
--		wed_set(dev, MTK_WED_WPDMA_CTRL,
--			MTK_WED_WPDMA_CTRL_SDL1_FIXED);
-+	wed_set(dev, MTK_WED_WPDMA_CTRL,
-+		MTK_WED_WPDMA_CTRL_SDL1_FIXED);
-+	wed_set(dev, MTK_WED_WPDMA_GLO_CFG,
-+		MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_PKT_PROC |
-+		MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_CRX_SYNC);
-+	wed_clr(dev, MTK_WED_WPDMA_GLO_CFG,
-+		MTK_WED_WPDMA_GLO_CFG_TX_TKID_KEEP |
-+		MTK_WED_WPDMA_GLO_CFG_TX_DMAD_DW3_PREV);
- 
--		wed_set(dev, MTK_WED_WDMA_GLO_CFG,
--			MTK_WED_WDMA_GLO_CFG_TX_DRV_EN |
--			MTK_WED_WDMA_GLO_CFG_TX_DDONE_CHK);
-+	if (!mtk_wed_get_rx_capa(dev))
-+		return;
- 
--		wed_set(dev, MTK_WED_WPDMA_GLO_CFG,
--			MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_PKT_PROC |
--			MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_CRX_SYNC);
--
--		wed_clr(dev, MTK_WED_WPDMA_GLO_CFG,
--			MTK_WED_WPDMA_GLO_CFG_TX_TKID_KEEP |
--			MTK_WED_WPDMA_GLO_CFG_TX_DMAD_DW3_PREV);
-+	wed_set(dev, MTK_WED_WDMA_GLO_CFG,
-+		MTK_WED_WDMA_GLO_CFG_TX_DRV_EN |
-+		MTK_WED_WDMA_GLO_CFG_TX_DDONE_CHK);
- 
--		wed_set(dev, MTK_WED_WPDMA_RX_D_GLO_CFG,
--			MTK_WED_WPDMA_RX_D_RX_DRV_EN |
--			FIELD_PREP(MTK_WED_WPDMA_RX_D_RXD_READ_LEN, 0x18) |
--			FIELD_PREP(MTK_WED_WPDMA_RX_D_INIT_PHASE_RXEN_SEL,
--				   0x2));
-+	wed_set(dev, MTK_WED_WPDMA_RX_D_GLO_CFG,
-+		MTK_WED_WPDMA_RX_D_RX_DRV_EN |
-+		FIELD_PREP(MTK_WED_WPDMA_RX_D_RXD_READ_LEN, 0x18) |
-+		FIELD_PREP(MTK_WED_WPDMA_RX_D_INIT_PHASE_RXEN_SEL,
-+			   0x2));
- 
--		for (i = 0; i < MTK_WED_RX_QUEUES; i++)
--			mtk_wed_check_wfdma_rx_fill(dev, i);
--	}
-+	for (i = 0; i < MTK_WED_RX_QUEUES; i++)
-+		mtk_wed_check_wfdma_rx_fill(dev, i);
- }
- 
- static void
-@@ -1472,7 +1484,7 @@ mtk_wed_start(struct mtk_wed_device *dev
- 
- 		val |= BIT(0) | (BIT(1) * !!dev->hw->index);
- 		regmap_write(dev->hw->mirror, dev->hw->index * 4, val);
--	} else {
-+	} else if (mtk_wed_get_rx_capa(dev)) {
- 		/* driver set mid ready and only once */
- 		wed_w32(dev, MTK_WED_EXT_INT_MASK1,
- 			MTK_WED_EXT_INT_STATUS_WPDMA_MID_RDY);
-@@ -1484,7 +1496,6 @@ mtk_wed_start(struct mtk_wed_device *dev
- 
- 		if (mtk_wed_rro_cfg(dev))
- 			return;
--
- 	}
- 
- 	mtk_wed_set_512_support(dev, dev->wlan.wcid_512);
-@@ -1550,13 +1561,14 @@ mtk_wed_attach(struct mtk_wed_device *de
- 	}
- 
- 	mtk_wed_hw_init_early(dev);
--	if (mtk_wed_is_v1(hw)) {
-+	if (mtk_wed_is_v1(hw))
- 		regmap_update_bits(hw->hifsys, HIFSYS_DMA_AG_MAP,
- 				   BIT(hw->index), 0);
--	} else {
-+	else
- 		dev->rev_id = wed_r32(dev, MTK_WED_REV_ID);
-+
-+	if (mtk_wed_get_rx_capa(dev))
- 		ret = mtk_wed_wo_init(hw);
--	}
- out:
- 	if (ret) {
- 		dev_err(dev->hw->dev, "failed to attach wed device\n");
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -207,7 +207,7 @@ int mtk_wed_mcu_msg_update(struct mtk_we
- {
- 	struct mtk_wed_wo *wo = dev->hw->wed_wo;
- 
--	if (mtk_wed_is_v1(dev->hw))
-+	if (!mtk_wed_get_rx_capa(dev))
- 		return 0;
- 
- 	if (WARN_ON(!wo))
diff --git a/target/linux/generic/backport-6.1/752-08-v6.7-net-ethernet-mtk_wed-rename-mtk_rxbm_desc-in-mtk_wed.patch b/target/linux/generic/backport-6.1/752-08-v6.7-net-ethernet-mtk_wed-rename-mtk_rxbm_desc-in-mtk_wed.patch
deleted file mode 100644
index d83434fb2c7d..000000000000
--- a/target/linux/generic/backport-6.1/752-08-v6.7-net-ethernet-mtk_wed-rename-mtk_rxbm_desc-in-mtk_wed.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 18 Sep 2023 12:29:07 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: rename mtk_rxbm_desc in
- mtk_wed_bm_desc
-
-Rename mtk_rxbm_desc structure in mtk_wed_bm_desc since it will be used
-even on tx side by MT7988 SoC.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -421,7 +421,7 @@ free_pagelist:
- static int
- mtk_wed_rx_buffer_alloc(struct mtk_wed_device *dev)
- {
--	struct mtk_rxbm_desc *desc;
-+	struct mtk_wed_bm_desc *desc;
- 	dma_addr_t desc_phys;
- 
- 	dev->rx_buf_ring.size = dev->wlan.rx_nbuf;
-@@ -441,7 +441,7 @@ mtk_wed_rx_buffer_alloc(struct mtk_wed_d
- static void
- mtk_wed_free_rx_buffer(struct mtk_wed_device *dev)
- {
--	struct mtk_rxbm_desc *desc = dev->rx_buf_ring.desc;
-+	struct mtk_wed_bm_desc *desc = dev->rx_buf_ring.desc;
- 
- 	if (!desc)
- 		return;
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -45,7 +45,7 @@ enum mtk_wed_wo_cmd {
- 	MTK_WED_WO_CMD_WED_END
- };
- 
--struct mtk_rxbm_desc {
-+struct mtk_wed_bm_desc {
- 	__le32 buf0;
- 	__le32 token;
- } __packed __aligned(4);
-@@ -105,7 +105,7 @@ struct mtk_wed_device {
- 	struct {
- 		int size;
- 		struct page_frag_cache rx_page;
--		struct mtk_rxbm_desc *desc;
-+		struct mtk_wed_bm_desc *desc;
- 		dma_addr_t desc_phys;
- 	} rx_buf_ring;
- 
diff --git a/target/linux/generic/backport-6.1/752-09-v6.7-net-ethernet-mtk_wed-introduce-mtk_wed_buf-structure.patch b/target/linux/generic/backport-6.1/752-09-v6.7-net-ethernet-mtk_wed-introduce-mtk_wed_buf-structure.patch
deleted file mode 100644
index 8000a8759e5b..000000000000
--- a/target/linux/generic/backport-6.1/752-09-v6.7-net-ethernet-mtk_wed-introduce-mtk_wed_buf-structure.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 18 Sep 2023 12:29:08 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: introduce mtk_wed_buf structure
-
-Introduce mtk_wed_buf structure to store both virtual and physical
-addresses allocated in mtk_wed_tx_buffer_alloc() routine. This is a
-preliminary patch to add WED support for MT7988 SoC since it relies on a
-different dma descriptor layout not storing page dma addresses.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -299,9 +299,9 @@ out:
- static int
- mtk_wed_tx_buffer_alloc(struct mtk_wed_device *dev)
- {
-+	struct mtk_wed_buf *page_list;
- 	struct mtk_wdma_desc *desc;
- 	dma_addr_t desc_phys;
--	void **page_list;
- 	int token = dev->wlan.token_start;
- 	int ring_size;
- 	int n_pages;
-@@ -342,7 +342,8 @@ mtk_wed_tx_buffer_alloc(struct mtk_wed_d
- 			return -ENOMEM;
- 		}
- 
--		page_list[page_idx++] = page;
-+		page_list[page_idx].p = page;
-+		page_list[page_idx++].phy_addr = page_phys;
- 		dma_sync_single_for_cpu(dev->hw->dev, page_phys, PAGE_SIZE,
- 					DMA_BIDIRECTIONAL);
- 
-@@ -386,8 +387,8 @@ mtk_wed_tx_buffer_alloc(struct mtk_wed_d
- static void
- mtk_wed_free_tx_buffer(struct mtk_wed_device *dev)
- {
-+	struct mtk_wed_buf *page_list = dev->tx_buf_ring.pages;
- 	struct mtk_wdma_desc *desc = dev->tx_buf_ring.desc;
--	void **page_list = dev->tx_buf_ring.pages;
- 	int page_idx;
- 	int i;
- 
-@@ -399,13 +400,12 @@ mtk_wed_free_tx_buffer(struct mtk_wed_de
- 
- 	for (i = 0, page_idx = 0; i < dev->tx_buf_ring.size;
- 	     i += MTK_WED_BUF_PER_PAGE) {
--		void *page = page_list[page_idx++];
--		dma_addr_t buf_addr;
-+		dma_addr_t buf_addr = page_list[page_idx].phy_addr;
-+		void *page = page_list[page_idx++].p;
- 
- 		if (!page)
- 			break;
- 
--		buf_addr = le32_to_cpu(desc[i].buf0);
- 		dma_unmap_page(dev->hw->dev, buf_addr, PAGE_SIZE,
- 			       DMA_BIDIRECTIONAL);
- 		__free_page(page);
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -76,6 +76,11 @@ struct mtk_wed_wo_rx_stats {
- 	__le32 rx_drop_cnt;
- };
- 
-+struct mtk_wed_buf {
-+	void *p;
-+	dma_addr_t phy_addr;
-+};
-+
- struct mtk_wed_device {
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
- 	const struct mtk_wed_ops *ops;
-@@ -97,7 +102,7 @@ struct mtk_wed_device {
- 
- 	struct {
- 		int size;
--		void **pages;
-+		struct mtk_wed_buf *pages;
- 		struct mtk_wdma_desc *desc;
- 		dma_addr_t desc_phys;
- 	} tx_buf_ring;
diff --git a/target/linux/generic/backport-6.1/752-10-v6.7-net-ethernet-mtk_wed-move-mem_region-array-out-of-mt.patch b/target/linux/generic/backport-6.1/752-10-v6.7-net-ethernet-mtk_wed-move-mem_region-array-out-of-mt.patch
deleted file mode 100644
index 98d782b1d074..000000000000
--- a/target/linux/generic/backport-6.1/752-10-v6.7-net-ethernet-mtk_wed-move-mem_region-array-out-of-mt.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 18 Sep 2023 12:29:09 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: move mem_region array out of
- mtk_wed_mcu_load_firmware
-
-Remove mtk_wed_wo_memory_region boot structure in mtk_wed_wo.
-This is a preliminary patch to introduce WED support for MT7988 SoC.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -16,14 +16,30 @@
- #include "mtk_wed_wo.h"
- #include "mtk_wed.h"
- 
-+static struct mtk_wed_wo_memory_region mem_region[] = {
-+	[MTK_WED_WO_REGION_EMI] = {
-+		.name = "wo-emi",
-+	},
-+	[MTK_WED_WO_REGION_ILM] = {
-+		.name = "wo-ilm",
-+	},
-+	[MTK_WED_WO_REGION_DATA] = {
-+		.name = "wo-data",
-+		.shared = true,
-+	},
-+	[MTK_WED_WO_REGION_BOOT] = {
-+		.name = "wo-boot",
-+	},
-+};
-+
- static u32 wo_r32(struct mtk_wed_wo *wo, u32 reg)
- {
--	return readl(wo->boot.addr + reg);
-+	return readl(mem_region[MTK_WED_WO_REGION_BOOT].addr + reg);
- }
- 
- static void wo_w32(struct mtk_wed_wo *wo, u32 reg, u32 val)
- {
--	writel(val, wo->boot.addr + reg);
-+	writel(val, mem_region[MTK_WED_WO_REGION_BOOT].addr + reg);
- }
- 
- static struct sk_buff *
-@@ -294,18 +310,6 @@ next:
- static int
- mtk_wed_mcu_load_firmware(struct mtk_wed_wo *wo)
- {
--	static struct mtk_wed_wo_memory_region mem_region[] = {
--		[MTK_WED_WO_REGION_EMI] = {
--			.name = "wo-emi",
--		},
--		[MTK_WED_WO_REGION_ILM] = {
--			.name = "wo-ilm",
--		},
--		[MTK_WED_WO_REGION_DATA] = {
--			.name = "wo-data",
--			.shared = true,
--		},
--	};
- 	const struct mtk_wed_fw_trailer *trailer;
- 	const struct firmware *fw;
- 	const char *fw_name;
-@@ -319,11 +323,6 @@ mtk_wed_mcu_load_firmware(struct mtk_wed
- 			return ret;
- 	}
- 
--	wo->boot.name = "wo-boot";
--	ret = mtk_wed_get_memory_region(wo, &wo->boot);
--	if (ret)
--		return ret;
--
- 	/* set dummy cr */
- 	wed_w32(wo->hw->wed_dev, MTK_WED_SCR0 + 4 * MTK_WED_DUMMY_CR_FWDL,
- 		wo->hw->index + 1);
---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-@@ -228,7 +228,6 @@ struct mtk_wed_wo_queue {
- 
- struct mtk_wed_wo {
- 	struct mtk_wed_hw *hw;
--	struct mtk_wed_wo_memory_region boot;
- 
- 	struct mtk_wed_wo_queue q_tx;
- 	struct mtk_wed_wo_queue q_rx;
diff --git a/target/linux/generic/backport-6.1/752-11-v6.7-net-ethernet-mtk_wed-make-memory-region-optional.patch b/target/linux/generic/backport-6.1/752-11-v6.7-net-ethernet-mtk_wed-make-memory-region-optional.patch
deleted file mode 100644
index 48b0d0204919..000000000000
--- a/target/linux/generic/backport-6.1/752-11-v6.7-net-ethernet-mtk_wed-make-memory-region-optional.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 18 Sep 2023 12:29:10 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: make memory region optional
-
-Make mtk_wed_wo_memory_region optionals.
-This is a preliminary patch to introduce Wireless Ethernet Dispatcher
-support for MT7988 SoC since MT7988 WED fw image will have a different
-layout.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -234,19 +234,13 @@ int mtk_wed_mcu_msg_update(struct mtk_we
- }
- 
- static int
--mtk_wed_get_memory_region(struct mtk_wed_wo *wo,
-+mtk_wed_get_memory_region(struct mtk_wed_hw *hw, int index,
- 			  struct mtk_wed_wo_memory_region *region)
- {
- 	struct reserved_mem *rmem;
- 	struct device_node *np;
--	int index;
- 
--	index = of_property_match_string(wo->hw->node, "memory-region-names",
--					 region->name);
--	if (index < 0)
--		return index;
--
--	np = of_parse_phandle(wo->hw->node, "memory-region", index);
-+	np = of_parse_phandle(hw->node, "memory-region", index);
- 	if (!np)
- 		return -ENODEV;
- 
-@@ -258,7 +252,7 @@ mtk_wed_get_memory_region(struct mtk_wed
- 
- 	region->phy_addr = rmem->base;
- 	region->size = rmem->size;
--	region->addr = devm_ioremap(wo->hw->dev, region->phy_addr, region->size);
-+	region->addr = devm_ioremap(hw->dev, region->phy_addr, region->size);
- 
- 	return !region->addr ? -EINVAL : 0;
- }
-@@ -271,6 +265,9 @@ mtk_wed_mcu_run_firmware(struct mtk_wed_
- 	const struct mtk_wed_fw_trailer *trailer;
- 	const struct mtk_wed_fw_region *fw_region;
- 
-+	if (!region->phy_addr || !region->size)
-+		return 0;
-+
- 	trailer_ptr = fw->data + fw->size - sizeof(*trailer);
- 	trailer = (const struct mtk_wed_fw_trailer *)trailer_ptr;
- 	region_ptr = trailer_ptr - trailer->num_region * sizeof(*fw_region);
-@@ -318,7 +315,13 @@ mtk_wed_mcu_load_firmware(struct mtk_wed
- 
- 	/* load firmware region metadata */
- 	for (i = 0; i < ARRAY_SIZE(mem_region); i++) {
--		ret = mtk_wed_get_memory_region(wo, &mem_region[i]);
-+		int index = of_property_match_string(wo->hw->node,
-+						     "memory-region-names",
-+						     mem_region[i].name);
-+		if (index < 0)
-+			continue;
-+
-+		ret = mtk_wed_get_memory_region(wo->hw, index, &mem_region[i]);
- 		if (ret)
- 			return ret;
- 	}
diff --git a/target/linux/generic/backport-6.1/752-13-v6.7-net-ethernet-mtk_wed-add-mtk_wed_soc_data-structure.patch b/target/linux/generic/backport-6.1/752-13-v6.7-net-ethernet-mtk_wed-add-mtk_wed_soc_data-structure.patch
deleted file mode 100644
index c43114fb5b15..000000000000
--- a/target/linux/generic/backport-6.1/752-13-v6.7-net-ethernet-mtk_wed-add-mtk_wed_soc_data-structure.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 18 Sep 2023 12:29:12 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: add mtk_wed_soc_data structure
-
-Introduce mtk_wed_soc_data utility structure to contain per-SoC
-definitions.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -48,6 +48,26 @@ struct mtk_wed_flow_block_priv {
- 	struct net_device *dev;
- };
- 
-+static const struct mtk_wed_soc_data mt7622_data = {
-+	.regmap = {
-+		.tx_bm_tkid		= 0x088,
-+		.wpdma_rx_ring0		= 0x770,
-+		.reset_idx_tx_mask	= GENMASK(3, 0),
-+		.reset_idx_rx_mask	= GENMASK(17, 16),
-+	},
-+	.wdma_desc_size = sizeof(struct mtk_wdma_desc),
-+};
-+
-+static const struct mtk_wed_soc_data mt7986_data = {
-+	.regmap = {
-+		.tx_bm_tkid		= 0x0c8,
-+		.wpdma_rx_ring0		= 0x770,
-+		.reset_idx_tx_mask	= GENMASK(1, 0),
-+		.reset_idx_rx_mask	= GENMASK(7, 6),
-+	},
-+	.wdma_desc_size = 2 * sizeof(struct mtk_wdma_desc),
-+};
-+
- static void
- wed_m32(struct mtk_wed_device *dev, u32 reg, u32 mask, u32 val)
- {
-@@ -746,7 +766,7 @@ mtk_wed_set_wpdma(struct mtk_wed_device
- 		return;
- 
- 	wed_w32(dev, MTK_WED_WPDMA_RX_GLO_CFG, dev->wlan.wpdma_rx_glo);
--	wed_w32(dev, MTK_WED_WPDMA_RX_RING, dev->wlan.wpdma_rx);
-+	wed_w32(dev, dev->hw->soc->regmap.wpdma_rx_ring0, dev->wlan.wpdma_rx);
- }
- 
- static void
-@@ -940,22 +960,10 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 	wed_w32(dev, MTK_WED_TX_BM_BUF_LEN, MTK_WED_PKT_SIZE);
- 
- 	if (mtk_wed_is_v1(dev->hw)) {
--		wed_w32(dev, MTK_WED_TX_BM_TKID,
--			FIELD_PREP(MTK_WED_TX_BM_TKID_START,
--				   dev->wlan.token_start) |
--			FIELD_PREP(MTK_WED_TX_BM_TKID_END,
--				   dev->wlan.token_start +
--				   dev->wlan.nbuf - 1));
- 		wed_w32(dev, MTK_WED_TX_BM_DYN_THR,
- 			FIELD_PREP(MTK_WED_TX_BM_DYN_THR_LO, 1) |
- 			MTK_WED_TX_BM_DYN_THR_HI);
- 	} else {
--		wed_w32(dev, MTK_WED_TX_BM_TKID_V2,
--			FIELD_PREP(MTK_WED_TX_BM_TKID_START,
--				   dev->wlan.token_start) |
--			FIELD_PREP(MTK_WED_TX_BM_TKID_END,
--				   dev->wlan.token_start +
--				   dev->wlan.nbuf - 1));
- 		wed_w32(dev, MTK_WED_TX_BM_DYN_THR,
- 			FIELD_PREP(MTK_WED_TX_BM_DYN_THR_LO_V2, 0) |
- 			MTK_WED_TX_BM_DYN_THR_HI_V2);
-@@ -970,6 +978,11 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 			MTK_WED_TX_TKID_DYN_THR_HI);
- 	}
- 
-+	wed_w32(dev, dev->hw->soc->regmap.tx_bm_tkid,
-+		FIELD_PREP(MTK_WED_TX_BM_TKID_START, dev->wlan.token_start) |
-+		FIELD_PREP(MTK_WED_TX_BM_TKID_END,
-+			   dev->wlan.token_start + dev->wlan.nbuf - 1));
-+
- 	mtk_wed_reset(dev, MTK_WED_RESET_TX_BM);
- 
- 	if (mtk_wed_is_v1(dev->hw)) {
-@@ -1104,13 +1117,8 @@ mtk_wed_rx_reset(struct mtk_wed_device *
- 	if (ret) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_WED_RX_DMA);
- 	} else {
--		struct mtk_eth *eth = dev->hw->eth;
--
--		if (mtk_is_netsys_v2_or_greater(eth))
--			wed_set(dev, MTK_WED_RESET_IDX,
--				MTK_WED_RESET_IDX_RX_V2);
--		else
--			wed_set(dev, MTK_WED_RESET_IDX, MTK_WED_RESET_IDX_RX);
-+		wed_set(dev, MTK_WED_RESET_IDX,
-+			dev->hw->soc->regmap.reset_idx_rx_mask);
- 		wed_w32(dev, MTK_WED_RESET_IDX, 0);
- 	}
- 
-@@ -1163,7 +1171,8 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 	if (busy) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_WED_TX_DMA);
- 	} else {
--		wed_w32(dev, MTK_WED_RESET_IDX, MTK_WED_RESET_IDX_TX);
-+		wed_w32(dev, MTK_WED_RESET_IDX,
-+			dev->hw->soc->regmap.reset_idx_tx_mask);
- 		wed_w32(dev, MTK_WED_RESET_IDX, 0);
- 	}
- 
-@@ -1255,7 +1264,6 @@ static int
- mtk_wed_wdma_rx_ring_setup(struct mtk_wed_device *dev, int idx, int size,
- 			   bool reset)
- {
--	u32 desc_size = sizeof(struct mtk_wdma_desc) * dev->hw->version;
- 	struct mtk_wed_ring *wdma;
- 
- 	if (idx >= ARRAY_SIZE(dev->rx_wdma))
-@@ -1263,7 +1271,7 @@ mtk_wed_wdma_rx_ring_setup(struct mtk_we
- 
- 	wdma = &dev->rx_wdma[idx];
- 	if (!reset && mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE,
--					 desc_size, true))
-+					 dev->hw->soc->wdma_desc_size, true))
- 		return -ENOMEM;
- 
- 	wdma_w32(dev, MTK_WDMA_RING_RX(idx) + MTK_WED_RING_OFS_BASE,
-@@ -1284,7 +1292,6 @@ static int
- mtk_wed_wdma_tx_ring_setup(struct mtk_wed_device *dev, int idx, int size,
- 			   bool reset)
- {
--	u32 desc_size = sizeof(struct mtk_wdma_desc) * dev->hw->version;
- 	struct mtk_wed_ring *wdma;
- 
- 	if (idx >= ARRAY_SIZE(dev->tx_wdma))
-@@ -1292,7 +1299,7 @@ mtk_wed_wdma_tx_ring_setup(struct mtk_we
- 
- 	wdma = &dev->tx_wdma[idx];
- 	if (!reset && mtk_wed_ring_alloc(dev, wdma, MTK_WED_WDMA_RING_SIZE,
--					 desc_size, true))
-+					 dev->hw->soc->wdma_desc_size, true))
- 		return -ENOMEM;
- 
- 	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_BASE,
-@@ -1931,7 +1938,12 @@ void mtk_wed_add_hw(struct device_node *
- 	hw->irq = irq;
- 	hw->version = eth->soc->version;
- 
--	if (mtk_wed_is_v1(hw)) {
-+	switch (hw->version) {
-+	case 2:
-+		hw->soc = &mt7986_data;
-+		break;
-+	default:
-+	case 1:
- 		hw->mirror = syscon_regmap_lookup_by_phandle(eth_np,
- 				"mediatek,pcie-mirror");
- 		hw->hifsys = syscon_regmap_lookup_by_phandle(eth_np,
-@@ -1945,6 +1957,8 @@ void mtk_wed_add_hw(struct device_node *
- 			regmap_write(hw->mirror, 0, 0);
- 			regmap_write(hw->mirror, 4, 0);
- 		}
-+		hw->soc = &mt7622_data;
-+		break;
- 	}
- 
- 	mtk_wed_hw_add_debugfs(hw);
---- a/drivers/net/ethernet/mediatek/mtk_wed.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.h
-@@ -12,7 +12,18 @@
- struct mtk_eth;
- struct mtk_wed_wo;
- 
-+struct mtk_wed_soc_data {
-+	struct {
-+		u32 tx_bm_tkid;
-+		u32 wpdma_rx_ring0;
-+		u32 reset_idx_tx_mask;
-+		u32 reset_idx_rx_mask;
-+	} regmap;
-+	u32 wdma_desc_size;
-+};
-+
- struct mtk_wed_hw {
-+	const struct mtk_wed_soc_data *soc;
- 	struct device_node *node;
- 	struct mtk_eth *eth;
- 	struct regmap *regs;
---- a/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -100,8 +100,6 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_TX_BM_BASE				0x084
- 
--#define MTK_WED_TX_BM_TKID				0x088
--#define MTK_WED_TX_BM_TKID_V2				0x0c8
- #define MTK_WED_TX_BM_TKID_START			GENMASK(15, 0)
- #define MTK_WED_TX_BM_TKID_END				GENMASK(31, 16)
- 
-@@ -160,9 +158,6 @@ struct mtk_wdma_desc {
- #define MTK_WED_GLO_CFG_RX_2B_OFFSET			BIT(31)
- 
- #define MTK_WED_RESET_IDX				0x20c
--#define MTK_WED_RESET_IDX_TX				GENMASK(3, 0)
--#define MTK_WED_RESET_IDX_RX				GENMASK(17, 16)
--#define MTK_WED_RESET_IDX_RX_V2				GENMASK(7, 6)
- #define MTK_WED_RESET_WPDMA_IDX_RX			GENMASK(31, 30)
- 
- #define MTK_WED_TX_MIB(_n)				(0x2a0 + (_n) * 4)
-@@ -286,7 +281,6 @@ struct mtk_wdma_desc {
- #define MTK_WED_WPDMA_RX_D_RST_DRV_IDX			GENMASK(25, 24)
- 
- #define MTK_WED_WPDMA_RX_GLO_CFG			0x76c
--#define MTK_WED_WPDMA_RX_RING				0x770
- 
- #define MTK_WED_WPDMA_RX_D_MIB(_n)			(0x774 + (_n) * 4)
- #define MTK_WED_WPDMA_RX_D_PROCESSED_MIB(_n)		(0x784 + (_n) * 4)
diff --git a/target/linux/generic/backport-6.1/752-14-v6.7-net-ethernet-mtk_wed-introduce-WED-support-for-MT798.patch b/target/linux/generic/backport-6.1/752-14-v6.7-net-ethernet-mtk_wed-introduce-WED-support-for-MT798.patch
deleted file mode 100644
index f874899c5bdc..000000000000
--- a/target/linux/generic/backport-6.1/752-14-v6.7-net-ethernet-mtk_wed-introduce-WED-support-for-MT798.patch
+++ /dev/null
@@ -1,1280 +0,0 @@
-From: Sujuan Chen <sujuan.chen@mediatek.com>
-Date: Mon, 18 Sep 2023 12:29:13 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: introduce WED support for MT7988
-
-Similar to MT7986 and MT7622, enable Wireless Ethernet Ditpatcher for
-MT7988 in order to offload traffic forwarded from LAN/WLAN to WLAN/LAN
-
-Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -195,6 +195,7 @@ static const struct mtk_reg_map mt7988_r
- 	.wdma_base = {
- 		[0]		= 0x4800,
- 		[1]		= 0x4c00,
-+		[2]		= 0x5000,
- 	},
- 	.pse_iq_sta		= 0x0180,
- 	.pse_oq_sta		= 0x01a0,
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1132,7 +1132,7 @@ struct mtk_reg_map {
- 	u32	gdm1_cnt;
- 	u32	gdma_to_ppe;
- 	u32	ppe_base;
--	u32	wdma_base[2];
-+	u32	wdma_base[3];
- 	u32	pse_iq_sta;
- 	u32	pse_oq_sta;
- };
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -201,6 +201,9 @@ mtk_flow_set_output_device(struct mtk_et
- 			case 1:
- 				pse_port = PSE_WDMA1_PORT;
- 				break;
-+			case 2:
-+				pse_port = PSE_WDMA2_PORT;
-+				break;
- 			default:
- 				return -EINVAL;
- 			}
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -16,17 +16,19 @@
- #include <net/flow_offload.h>
- #include <net/pkt_cls.h>
- #include "mtk_eth_soc.h"
--#include "mtk_wed_regs.h"
- #include "mtk_wed.h"
- #include "mtk_ppe.h"
- #include "mtk_wed_wo.h"
- 
- #define MTK_PCIE_BASE(n)		(0x1a143000 + (n) * 0x2000)
- 
--#define MTK_WED_PKT_SIZE		1900
-+#define MTK_WED_PKT_SIZE		1920
- #define MTK_WED_BUF_SIZE		2048
-+#define MTK_WED_PAGE_BUF_SIZE		128
- #define MTK_WED_BUF_PER_PAGE		(PAGE_SIZE / 2048)
-+#define MTK_WED_RX_PAGE_BUF_PER_PAGE	(PAGE_SIZE / 128)
- #define MTK_WED_RX_RING_SIZE		1536
-+#define MTK_WED_RX_PG_BM_CNT		8192
- 
- #define MTK_WED_TX_RING_SIZE		2048
- #define MTK_WED_WDMA_RING_SIZE		1024
-@@ -40,7 +42,10 @@
- #define MTK_WED_RRO_QUE_CNT		8192
- #define MTK_WED_MIOD_ENTRY_CNT		128
- 
--static struct mtk_wed_hw *hw_list[2];
-+#define MTK_WED_TX_BM_DMA_SIZE		65536
-+#define MTK_WED_TX_BM_PKT_CNT		32768
-+
-+static struct mtk_wed_hw *hw_list[3];
- static DEFINE_MUTEX(hw_lock);
- 
- struct mtk_wed_flow_block_priv {
-@@ -55,6 +60,7 @@ static const struct mtk_wed_soc_data mt7
- 		.reset_idx_tx_mask	= GENMASK(3, 0),
- 		.reset_idx_rx_mask	= GENMASK(17, 16),
- 	},
-+	.tx_ring_desc_size = sizeof(struct mtk_wdma_desc),
- 	.wdma_desc_size = sizeof(struct mtk_wdma_desc),
- };
- 
-@@ -65,6 +71,18 @@ static const struct mtk_wed_soc_data mt7
- 		.reset_idx_tx_mask	= GENMASK(1, 0),
- 		.reset_idx_rx_mask	= GENMASK(7, 6),
- 	},
-+	.tx_ring_desc_size = sizeof(struct mtk_wdma_desc),
-+	.wdma_desc_size = 2 * sizeof(struct mtk_wdma_desc),
-+};
-+
-+static const struct mtk_wed_soc_data mt7988_data = {
-+	.regmap = {
-+		.tx_bm_tkid		= 0x0c8,
-+		.wpdma_rx_ring0		= 0x7d0,
-+		.reset_idx_tx_mask	= GENMASK(1, 0),
-+		.reset_idx_rx_mask	= GENMASK(7, 6),
-+	},
-+	.tx_ring_desc_size = sizeof(struct mtk_wed_bm_desc),
- 	.wdma_desc_size = 2 * sizeof(struct mtk_wdma_desc),
- };
- 
-@@ -319,33 +337,38 @@ out:
- static int
- mtk_wed_tx_buffer_alloc(struct mtk_wed_device *dev)
- {
-+	u32 desc_size = dev->hw->soc->tx_ring_desc_size;
-+	int i, page_idx = 0, n_pages, ring_size;
-+	int token = dev->wlan.token_start;
- 	struct mtk_wed_buf *page_list;
--	struct mtk_wdma_desc *desc;
- 	dma_addr_t desc_phys;
--	int token = dev->wlan.token_start;
--	int ring_size;
--	int n_pages;
--	int i, page_idx;
-+	void *desc_ptr;
- 
--	ring_size = dev->wlan.nbuf & ~(MTK_WED_BUF_PER_PAGE - 1);
--	n_pages = ring_size / MTK_WED_BUF_PER_PAGE;
-+	if (!mtk_wed_is_v3_or_greater(dev->hw)) {
-+		ring_size = dev->wlan.nbuf & ~(MTK_WED_BUF_PER_PAGE - 1);
-+		dev->tx_buf_ring.size = ring_size;
-+	} else {
-+		dev->tx_buf_ring.size = MTK_WED_TX_BM_DMA_SIZE;
-+		ring_size = MTK_WED_TX_BM_PKT_CNT;
-+	}
-+	n_pages = dev->tx_buf_ring.size / MTK_WED_BUF_PER_PAGE;
- 
- 	page_list = kcalloc(n_pages, sizeof(*page_list), GFP_KERNEL);
- 	if (!page_list)
- 		return -ENOMEM;
- 
--	dev->tx_buf_ring.size = ring_size;
- 	dev->tx_buf_ring.pages = page_list;
- 
--	desc = dma_alloc_coherent(dev->hw->dev, ring_size * sizeof(*desc),
--				  &desc_phys, GFP_KERNEL);
--	if (!desc)
-+	desc_ptr = dma_alloc_coherent(dev->hw->dev,
-+				      dev->tx_buf_ring.size * desc_size,
-+				      &desc_phys, GFP_KERNEL);
-+	if (!desc_ptr)
- 		return -ENOMEM;
- 
--	dev->tx_buf_ring.desc = desc;
-+	dev->tx_buf_ring.desc = desc_ptr;
- 	dev->tx_buf_ring.desc_phys = desc_phys;
- 
--	for (i = 0, page_idx = 0; i < ring_size; i += MTK_WED_BUF_PER_PAGE) {
-+	for (i = 0; i < ring_size; i += MTK_WED_BUF_PER_PAGE) {
- 		dma_addr_t page_phys, buf_phys;
- 		struct page *page;
- 		void *buf;
-@@ -371,28 +394,31 @@ mtk_wed_tx_buffer_alloc(struct mtk_wed_d
- 		buf_phys = page_phys;
- 
- 		for (s = 0; s < MTK_WED_BUF_PER_PAGE; s++) {
--			u32 txd_size;
--			u32 ctrl;
--
--			txd_size = dev->wlan.init_buf(buf, buf_phys, token++);
-+			struct mtk_wdma_desc *desc = desc_ptr;
- 
- 			desc->buf0 = cpu_to_le32(buf_phys);
--			desc->buf1 = cpu_to_le32(buf_phys + txd_size);
-+			if (!mtk_wed_is_v3_or_greater(dev->hw)) {
-+				u32 txd_size, ctrl;
- 
--			if (mtk_wed_is_v1(dev->hw))
--				ctrl = FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN0, txd_size) |
--				       FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN1,
--						  MTK_WED_BUF_SIZE - txd_size) |
--				       MTK_WDMA_DESC_CTRL_LAST_SEG1;
--			else
--				ctrl = FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN0, txd_size) |
--				       FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN1_V2,
--						  MTK_WED_BUF_SIZE - txd_size) |
--				       MTK_WDMA_DESC_CTRL_LAST_SEG0;
--			desc->ctrl = cpu_to_le32(ctrl);
--			desc->info = 0;
--			desc++;
-+				txd_size = dev->wlan.init_buf(buf, buf_phys,
-+							      token++);
-+				desc->buf1 = cpu_to_le32(buf_phys + txd_size);
-+				ctrl = FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN0, txd_size);
-+				if (mtk_wed_is_v1(dev->hw))
-+					ctrl |= MTK_WDMA_DESC_CTRL_LAST_SEG1 |
-+						FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN1,
-+							   MTK_WED_BUF_SIZE - txd_size);
-+				else
-+					ctrl |= MTK_WDMA_DESC_CTRL_LAST_SEG0 |
-+						FIELD_PREP(MTK_WDMA_DESC_CTRL_LEN1_V2,
-+							   MTK_WED_BUF_SIZE - txd_size);
-+				desc->ctrl = cpu_to_le32(ctrl);
-+				desc->info = 0;
-+			} else {
-+				desc->ctrl = cpu_to_le32(token << 16);
-+			}
- 
-+			desc_ptr += desc_size;
- 			buf += MTK_WED_BUF_SIZE;
- 			buf_phys += MTK_WED_BUF_SIZE;
- 		}
-@@ -408,31 +434,31 @@ static void
- mtk_wed_free_tx_buffer(struct mtk_wed_device *dev)
- {
- 	struct mtk_wed_buf *page_list = dev->tx_buf_ring.pages;
--	struct mtk_wdma_desc *desc = dev->tx_buf_ring.desc;
--	int page_idx;
--	int i;
-+	struct mtk_wed_hw *hw = dev->hw;
-+	int i, page_idx = 0;
- 
- 	if (!page_list)
- 		return;
- 
--	if (!desc)
-+	if (!dev->tx_buf_ring.desc)
- 		goto free_pagelist;
- 
--	for (i = 0, page_idx = 0; i < dev->tx_buf_ring.size;
--	     i += MTK_WED_BUF_PER_PAGE) {
--		dma_addr_t buf_addr = page_list[page_idx].phy_addr;
-+	for (i = 0; i < dev->tx_buf_ring.size; i += MTK_WED_BUF_PER_PAGE) {
-+		dma_addr_t page_phy = page_list[page_idx].phy_addr;
- 		void *page = page_list[page_idx++].p;
- 
- 		if (!page)
- 			break;
- 
--		dma_unmap_page(dev->hw->dev, buf_addr, PAGE_SIZE,
-+		dma_unmap_page(dev->hw->dev, page_phy, PAGE_SIZE,
- 			       DMA_BIDIRECTIONAL);
- 		__free_page(page);
- 	}
- 
--	dma_free_coherent(dev->hw->dev, dev->tx_buf_ring.size * sizeof(*desc),
--			  desc, dev->tx_buf_ring.desc_phys);
-+	dma_free_coherent(dev->hw->dev,
-+			  dev->tx_buf_ring.size * hw->soc->tx_ring_desc_size,
-+			  dev->tx_buf_ring.desc,
-+			  dev->tx_buf_ring.desc_phys);
- 
- free_pagelist:
- 	kfree(page_list);
-@@ -517,13 +543,23 @@ mtk_wed_set_ext_int(struct mtk_wed_devic
- {
- 	u32 mask = MTK_WED_EXT_INT_STATUS_ERROR_MASK;
- 
--	if (mtk_wed_is_v1(dev->hw))
-+	switch (dev->hw->version) {
-+	case 1:
- 		mask |= MTK_WED_EXT_INT_STATUS_TX_DRV_R_RESP_ERR;
--	else
-+		break;
-+	case 2:
- 		mask |= MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH |
- 			MTK_WED_EXT_INT_STATUS_RX_FBUF_HI_TH |
- 			MTK_WED_EXT_INT_STATUS_RX_DRV_COHERENT |
- 			MTK_WED_EXT_INT_STATUS_TX_DMA_W_RESP_ERR;
-+		break;
-+	case 3:
-+		mask = MTK_WED_EXT_INT_STATUS_RX_DRV_COHERENT |
-+		       MTK_WED_EXT_INT_STATUS_TKID_WO_PYLD;
-+		break;
-+	default:
-+		break;
-+	}
- 
- 	if (!dev->hw->num_flows)
- 		mask &= ~MTK_WED_EXT_INT_STATUS_TKID_WO_PYLD;
-@@ -535,6 +571,9 @@ mtk_wed_set_ext_int(struct mtk_wed_devic
- static void
- mtk_wed_set_512_support(struct mtk_wed_device *dev, bool enable)
- {
-+	if (!mtk_wed_is_v2(dev->hw))
-+		return;
-+
- 	if (enable) {
- 		wed_w32(dev, MTK_WED_TXDP_CTRL, MTK_WED_TXDP_DW9_OVERWR);
- 		wed_w32(dev, MTK_WED_TXP_DW1,
-@@ -609,6 +648,14 @@ mtk_wed_dma_disable(struct mtk_wed_devic
- 			MTK_WED_WPDMA_RX_D_RX_DRV_EN);
- 		wed_clr(dev, MTK_WED_WDMA_GLO_CFG,
- 			MTK_WED_WDMA_GLO_CFG_TX_DDONE_CHK);
-+
-+		if (mtk_wed_is_v3_or_greater(dev->hw) &&
-+		    mtk_wed_get_rx_capa(dev)) {
-+			wdma_clr(dev, MTK_WDMA_PREF_TX_CFG,
-+				 MTK_WDMA_PREF_TX_CFG_PREF_EN);
-+			wdma_clr(dev, MTK_WDMA_PREF_RX_CFG,
-+				 MTK_WDMA_PREF_RX_CFG_PREF_EN);
-+		}
- 	}
- 
- 	mtk_wed_set_512_support(dev, false);
-@@ -651,6 +698,14 @@ mtk_wed_deinit(struct mtk_wed_device *de
- 		MTK_WED_CTRL_RX_ROUTE_QM_EN |
- 		MTK_WED_CTRL_WED_RX_BM_EN |
- 		MTK_WED_CTRL_RX_RRO_QM_EN);
-+
-+	if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+		wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_TX_AMSDU_EN);
-+		wed_clr(dev, MTK_WED_RESET, MTK_WED_RESET_TX_AMSDU);
-+		wed_clr(dev, MTK_WED_PCIE_INT_CTRL,
-+			MTK_WED_PCIE_INT_CTRL_MSK_EN_POLA |
-+			MTK_WED_PCIE_INT_CTRL_MSK_IRQ_FILTER);
-+	}
- }
- 
- static void
-@@ -700,21 +755,37 @@ mtk_wed_detach(struct mtk_wed_device *de
- 	mutex_unlock(&hw_lock);
- }
- 
--#define PCIE_BASE_ADDR0		0x11280000
- static void
- mtk_wed_bus_init(struct mtk_wed_device *dev)
- {
- 	switch (dev->wlan.bus_type) {
- 	case MTK_WED_BUS_PCIE: {
- 		struct device_node *np = dev->hw->eth->dev->of_node;
--		struct regmap *regs;
- 
--		regs = syscon_regmap_lookup_by_phandle(np,
--						       "mediatek,wed-pcie");
--		if (IS_ERR(regs))
--			break;
-+		if (mtk_wed_is_v2(dev->hw)) {
-+			struct regmap *regs;
-+
-+			regs = syscon_regmap_lookup_by_phandle(np,
-+							       "mediatek,wed-pcie");
-+			if (IS_ERR(regs))
-+				break;
- 
--		regmap_update_bits(regs, 0, BIT(0), BIT(0));
-+			regmap_update_bits(regs, 0, BIT(0), BIT(0));
-+		}
-+
-+		if (dev->wlan.msi) {
-+			wed_w32(dev, MTK_WED_PCIE_CFG_INTM,
-+				dev->hw->pcie_base | 0xc08);
-+			wed_w32(dev, MTK_WED_PCIE_CFG_BASE,
-+				dev->hw->pcie_base | 0xc04);
-+			wed_w32(dev, MTK_WED_PCIE_INT_TRIGGER, BIT(8));
-+		} else {
-+			wed_w32(dev, MTK_WED_PCIE_CFG_INTM,
-+				dev->hw->pcie_base | 0x180);
-+			wed_w32(dev, MTK_WED_PCIE_CFG_BASE,
-+				dev->hw->pcie_base | 0x184);
-+			wed_w32(dev, MTK_WED_PCIE_INT_TRIGGER, BIT(24));
-+		}
- 
- 		wed_w32(dev, MTK_WED_PCIE_INT_CTRL,
- 			FIELD_PREP(MTK_WED_PCIE_INT_CTRL_POLL_EN, 2));
-@@ -722,19 +793,9 @@ mtk_wed_bus_init(struct mtk_wed_device *
- 		/* pcie interrupt control: pola/source selection */
- 		wed_set(dev, MTK_WED_PCIE_INT_CTRL,
- 			MTK_WED_PCIE_INT_CTRL_MSK_EN_POLA |
--			FIELD_PREP(MTK_WED_PCIE_INT_CTRL_SRC_SEL, 1));
--		wed_r32(dev, MTK_WED_PCIE_INT_CTRL);
--
--		wed_w32(dev, MTK_WED_PCIE_CFG_INTM, PCIE_BASE_ADDR0 | 0x180);
--		wed_w32(dev, MTK_WED_PCIE_CFG_BASE, PCIE_BASE_ADDR0 | 0x184);
--
--		/* pcie interrupt status trigger register */
--		wed_w32(dev, MTK_WED_PCIE_INT_TRIGGER, BIT(24));
--		wed_r32(dev, MTK_WED_PCIE_INT_TRIGGER);
--
--		/* pola setting */
--		wed_set(dev, MTK_WED_PCIE_INT_CTRL,
--			MTK_WED_PCIE_INT_CTRL_MSK_EN_POLA);
-+			MTK_WED_PCIE_INT_CTRL_MSK_IRQ_FILTER  |
-+			FIELD_PREP(MTK_WED_PCIE_INT_CTRL_SRC_SEL,
-+				   dev->hw->index));
- 		break;
- 	}
- 	case MTK_WED_BUS_AXI:
-@@ -772,18 +833,19 @@ mtk_wed_set_wpdma(struct mtk_wed_device
- static void
- mtk_wed_hw_init_early(struct mtk_wed_device *dev)
- {
--	u32 mask, set;
-+	u32 set = FIELD_PREP(MTK_WED_WDMA_GLO_CFG_BT_SIZE, 2);
-+	u32 mask = MTK_WED_WDMA_GLO_CFG_BT_SIZE;
- 
- 	mtk_wed_deinit(dev);
- 	mtk_wed_reset(dev, MTK_WED_RESET_WED);
- 	mtk_wed_set_wpdma(dev);
- 
--	mask = MTK_WED_WDMA_GLO_CFG_BT_SIZE |
--	       MTK_WED_WDMA_GLO_CFG_DYNAMIC_DMAD_RECYCLE |
--	       MTK_WED_WDMA_GLO_CFG_RX_DIS_FSM_AUTO_IDLE;
--	set = FIELD_PREP(MTK_WED_WDMA_GLO_CFG_BT_SIZE, 2) |
--	      MTK_WED_WDMA_GLO_CFG_DYNAMIC_SKIP_DMAD_PREP |
--	      MTK_WED_WDMA_GLO_CFG_IDLE_DMAD_SUPPLY;
-+	if (!mtk_wed_is_v3_or_greater(dev->hw)) {
-+		mask |= MTK_WED_WDMA_GLO_CFG_DYNAMIC_DMAD_RECYCLE |
-+			MTK_WED_WDMA_GLO_CFG_RX_DIS_FSM_AUTO_IDLE;
-+		set |= MTK_WED_WDMA_GLO_CFG_DYNAMIC_SKIP_DMAD_PREP |
-+		       MTK_WED_WDMA_GLO_CFG_IDLE_DMAD_SUPPLY;
-+	}
- 	wed_m32(dev, MTK_WED_WDMA_GLO_CFG, mask, set);
- 
- 	if (mtk_wed_is_v1(dev->hw)) {
-@@ -931,11 +993,18 @@ mtk_wed_route_qm_hw_init(struct mtk_wed_
- 	}
- 
- 	/* configure RX_ROUTE_QM */
--	wed_clr(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_Q_RST);
--	wed_clr(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_TXDMAD_FPORT);
--	wed_set(dev, MTK_WED_RTQM_GLO_CFG,
--		FIELD_PREP(MTK_WED_RTQM_TXDMAD_FPORT, 0x3 + dev->hw->index));
--	wed_clr(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_Q_RST);
-+	if (mtk_wed_is_v2(dev->hw)) {
-+		wed_clr(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_Q_RST);
-+		wed_clr(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_TXDMAD_FPORT);
-+		wed_set(dev, MTK_WED_RTQM_GLO_CFG,
-+			FIELD_PREP(MTK_WED_RTQM_TXDMAD_FPORT,
-+				   0x3 + dev->hw->index));
-+		wed_clr(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_Q_RST);
-+	} else {
-+		wed_set(dev, MTK_WED_RTQM_ENQ_CFG0,
-+			FIELD_PREP(MTK_WED_RTQM_ENQ_CFG_TXDMAD_FPORT,
-+				   0x3 + dev->hw->index));
-+	}
- 	/* enable RX_ROUTE_QM */
- 	wed_set(dev, MTK_WED_CTRL, MTK_WED_CTRL_RX_ROUTE_QM_EN);
- }
-@@ -948,22 +1017,30 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 
- 	dev->init_done = true;
- 	mtk_wed_set_ext_int(dev, false);
--	wed_w32(dev, MTK_WED_TX_BM_CTRL,
--		MTK_WED_TX_BM_CTRL_PAUSE |
--		FIELD_PREP(MTK_WED_TX_BM_CTRL_VLD_GRP_NUM,
--			   dev->tx_buf_ring.size / 128) |
--		FIELD_PREP(MTK_WED_TX_BM_CTRL_RSV_GRP_NUM,
--			   MTK_WED_TX_RING_SIZE / 256));
- 
- 	wed_w32(dev, MTK_WED_TX_BM_BASE, dev->tx_buf_ring.desc_phys);
--
- 	wed_w32(dev, MTK_WED_TX_BM_BUF_LEN, MTK_WED_PKT_SIZE);
- 
- 	if (mtk_wed_is_v1(dev->hw)) {
-+		wed_w32(dev, MTK_WED_TX_BM_CTRL,
-+			MTK_WED_TX_BM_CTRL_PAUSE |
-+			FIELD_PREP(MTK_WED_TX_BM_CTRL_VLD_GRP_NUM,
-+				   dev->tx_buf_ring.size / 128) |
-+			FIELD_PREP(MTK_WED_TX_BM_CTRL_RSV_GRP_NUM,
-+				   MTK_WED_TX_RING_SIZE / 256));
- 		wed_w32(dev, MTK_WED_TX_BM_DYN_THR,
- 			FIELD_PREP(MTK_WED_TX_BM_DYN_THR_LO, 1) |
- 			MTK_WED_TX_BM_DYN_THR_HI);
--	} else {
-+	} else if (mtk_wed_is_v2(dev->hw)) {
-+		wed_w32(dev, MTK_WED_TX_BM_CTRL,
-+			MTK_WED_TX_BM_CTRL_PAUSE |
-+			FIELD_PREP(MTK_WED_TX_BM_CTRL_VLD_GRP_NUM,
-+				   dev->tx_buf_ring.size / 128) |
-+			FIELD_PREP(MTK_WED_TX_BM_CTRL_RSV_GRP_NUM,
-+				   MTK_WED_TX_RING_SIZE / 256));
-+		wed_w32(dev, MTK_WED_TX_TKID_DYN_THR,
-+			FIELD_PREP(MTK_WED_TX_TKID_DYN_THR_LO, 0) |
-+			MTK_WED_TX_TKID_DYN_THR_HI);
- 		wed_w32(dev, MTK_WED_TX_BM_DYN_THR,
- 			FIELD_PREP(MTK_WED_TX_BM_DYN_THR_LO_V2, 0) |
- 			MTK_WED_TX_BM_DYN_THR_HI_V2);
-@@ -973,9 +1050,6 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 				   dev->tx_buf_ring.size / 128) |
- 			FIELD_PREP(MTK_WED_TX_TKID_CTRL_RSV_GRP_NUM,
- 				   dev->tx_buf_ring.size / 128));
--		wed_w32(dev, MTK_WED_TX_TKID_DYN_THR,
--			FIELD_PREP(MTK_WED_TX_TKID_DYN_THR_LO, 0) |
--			MTK_WED_TX_TKID_DYN_THR_HI);
- 	}
- 
- 	wed_w32(dev, dev->hw->soc->regmap.tx_bm_tkid,
-@@ -985,26 +1059,62 @@ mtk_wed_hw_init(struct mtk_wed_device *d
- 
- 	mtk_wed_reset(dev, MTK_WED_RESET_TX_BM);
- 
-+	if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+		/* switch to new bm architecture */
-+		wed_clr(dev, MTK_WED_TX_BM_CTRL,
-+			MTK_WED_TX_BM_CTRL_LEGACY_EN);
-+
-+		wed_w32(dev, MTK_WED_TX_TKID_CTRL,
-+			MTK_WED_TX_TKID_CTRL_PAUSE |
-+			FIELD_PREP(MTK_WED_TX_TKID_CTRL_VLD_GRP_NUM_V3,
-+				   dev->wlan.nbuf / 128) |
-+			FIELD_PREP(MTK_WED_TX_TKID_CTRL_RSV_GRP_NUM_V3,
-+				   dev->wlan.nbuf / 128));
-+		/* return SKBID + SDP back to bm */
-+		wed_set(dev, MTK_WED_TX_TKID_CTRL,
-+			MTK_WED_TX_TKID_CTRL_FREE_FORMAT);
-+
-+		wed_w32(dev, MTK_WED_TX_BM_INIT_PTR,
-+			MTK_WED_TX_BM_PKT_CNT |
-+			MTK_WED_TX_BM_INIT_SW_TAIL_IDX);
-+	}
-+
- 	if (mtk_wed_is_v1(dev->hw)) {
- 		wed_set(dev, MTK_WED_CTRL,
- 			MTK_WED_CTRL_WED_TX_BM_EN |
- 			MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
--	} else {
--		wed_clr(dev, MTK_WED_TX_TKID_CTRL, MTK_WED_TX_TKID_CTRL_PAUSE);
--		if (mtk_wed_get_rx_capa(dev)) {
--			/* rx hw init */
--			wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX,
--				MTK_WED_WPDMA_RX_D_RST_CRX_IDX |
--				MTK_WED_WPDMA_RX_D_RST_DRV_IDX);
--			wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX, 0);
--
--			mtk_wed_rx_buffer_hw_init(dev);
--			mtk_wed_rro_hw_init(dev);
--			mtk_wed_route_qm_hw_init(dev);
--		}
-+	} else if (mtk_wed_get_rx_capa(dev)) {
-+		/* rx hw init */
-+		wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX,
-+			MTK_WED_WPDMA_RX_D_RST_CRX_IDX |
-+			MTK_WED_WPDMA_RX_D_RST_DRV_IDX);
-+		wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX, 0);
-+
-+		/* reset prefetch index of ring */
-+		wed_set(dev, MTK_WED_WPDMA_RX_D_PREF_RX0_SIDX,
-+			MTK_WED_WPDMA_RX_D_PREF_SIDX_IDX_CLR);
-+		wed_clr(dev, MTK_WED_WPDMA_RX_D_PREF_RX0_SIDX,
-+			MTK_WED_WPDMA_RX_D_PREF_SIDX_IDX_CLR);
-+
-+		wed_set(dev, MTK_WED_WPDMA_RX_D_PREF_RX1_SIDX,
-+			MTK_WED_WPDMA_RX_D_PREF_SIDX_IDX_CLR);
-+		wed_clr(dev, MTK_WED_WPDMA_RX_D_PREF_RX1_SIDX,
-+			MTK_WED_WPDMA_RX_D_PREF_SIDX_IDX_CLR);
-+
-+		/* reset prefetch FIFO of ring */
-+		wed_set(dev, MTK_WED_WPDMA_RX_D_PREF_FIFO_CFG,
-+			MTK_WED_WPDMA_RX_D_PREF_FIFO_CFG_R0_CLR |
-+			MTK_WED_WPDMA_RX_D_PREF_FIFO_CFG_R1_CLR);
-+		wed_w32(dev, MTK_WED_WPDMA_RX_D_PREF_FIFO_CFG, 0);
-+
-+		mtk_wed_rx_buffer_hw_init(dev);
-+		mtk_wed_rro_hw_init(dev);
-+		mtk_wed_route_qm_hw_init(dev);
- 	}
- 
- 	wed_clr(dev, MTK_WED_TX_BM_CTRL, MTK_WED_TX_BM_CTRL_PAUSE);
-+	if (!mtk_wed_is_v1(dev->hw))
-+		wed_clr(dev, MTK_WED_TX_TKID_CTRL, MTK_WED_TX_TKID_CTRL_PAUSE);
- }
- 
- static void
-@@ -1302,6 +1412,24 @@ mtk_wed_wdma_tx_ring_setup(struct mtk_we
- 					 dev->hw->soc->wdma_desc_size, true))
- 		return -ENOMEM;
- 
-+	if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+		struct mtk_wdma_desc *desc = wdma->desc;
-+		int i;
-+
-+		for (i = 0; i < MTK_WED_WDMA_RING_SIZE; i++) {
-+			desc->buf0 = 0;
-+			desc->ctrl = cpu_to_le32(MTK_WDMA_DESC_CTRL_DMA_DONE);
-+			desc->buf1 = 0;
-+			desc->info = cpu_to_le32(MTK_WDMA_TXD0_DESC_INFO_DMA_DONE);
-+			desc++;
-+			desc->buf0 = 0;
-+			desc->ctrl = cpu_to_le32(MTK_WDMA_DESC_CTRL_DMA_DONE);
-+			desc->buf1 = 0;
-+			desc->info = cpu_to_le32(MTK_WDMA_TXD1_DESC_INFO_DMA_DONE);
-+			desc++;
-+		}
-+	}
-+
- 	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_BASE,
- 		 wdma->desc_phys);
- 	wdma_w32(dev, MTK_WDMA_RING_TX(idx) + MTK_WED_RING_OFS_COUNT,
-@@ -1367,6 +1495,9 @@ mtk_wed_configure_irq(struct mtk_wed_dev
- 
- 		wed_clr(dev, MTK_WED_WDMA_INT_CTRL, wdma_mask);
- 	} else {
-+		if (mtk_wed_is_v3_or_greater(dev->hw))
-+			wed_set(dev, MTK_WED_CTRL, MTK_WED_CTRL_TX_TKID_ALI_EN);
-+
- 		/* initail tx interrupt trigger */
- 		wed_w32(dev, MTK_WED_WPDMA_INT_CTRL_TX,
- 			MTK_WED_WPDMA_INT_CTRL_TX0_DONE_EN |
-@@ -1419,33 +1550,60 @@ mtk_wed_dma_enable(struct mtk_wed_device
- {
- 	int i;
- 
--	wed_set(dev, MTK_WED_WPDMA_INT_CTRL, MTK_WED_WPDMA_INT_CTRL_SUBRT_ADV);
-+	if (!mtk_wed_is_v3_or_greater(dev->hw)) {
-+		wed_set(dev, MTK_WED_WPDMA_INT_CTRL,
-+			MTK_WED_WPDMA_INT_CTRL_SUBRT_ADV);
-+		wed_set(dev, MTK_WED_WPDMA_GLO_CFG,
-+			MTK_WED_WPDMA_GLO_CFG_TX_DRV_EN |
-+			MTK_WED_WPDMA_GLO_CFG_RX_DRV_EN);
-+		wdma_set(dev, MTK_WDMA_GLO_CFG,
-+			 MTK_WDMA_GLO_CFG_TX_DMA_EN |
-+			 MTK_WDMA_GLO_CFG_RX_INFO1_PRERES |
-+			 MTK_WDMA_GLO_CFG_RX_INFO2_PRERES);
-+		wed_set(dev, MTK_WED_WPDMA_CTRL, MTK_WED_WPDMA_CTRL_SDL1_FIXED);
-+	} else {
-+		wed_set(dev, MTK_WED_WPDMA_GLO_CFG,
-+			MTK_WED_WPDMA_GLO_CFG_TX_DRV_EN |
-+			MTK_WED_WPDMA_GLO_CFG_RX_DRV_EN |
-+			MTK_WED_WPDMA_GLO_CFG_RX_DDONE2_WR);
-+		wdma_set(dev, MTK_WDMA_GLO_CFG, MTK_WDMA_GLO_CFG_TX_DMA_EN);
-+	}
- 
- 	wed_set(dev, MTK_WED_GLO_CFG,
- 		MTK_WED_GLO_CFG_TX_DMA_EN |
- 		MTK_WED_GLO_CFG_RX_DMA_EN);
--	wed_set(dev, MTK_WED_WPDMA_GLO_CFG,
--		MTK_WED_WPDMA_GLO_CFG_TX_DRV_EN |
--		MTK_WED_WPDMA_GLO_CFG_RX_DRV_EN);
-+
- 	wed_set(dev, MTK_WED_WDMA_GLO_CFG,
- 		MTK_WED_WDMA_GLO_CFG_RX_DRV_EN);
- 
--	wdma_set(dev, MTK_WDMA_GLO_CFG,
--		 MTK_WDMA_GLO_CFG_TX_DMA_EN |
--		 MTK_WDMA_GLO_CFG_RX_INFO1_PRERES |
--		 MTK_WDMA_GLO_CFG_RX_INFO2_PRERES);
--
- 	if (mtk_wed_is_v1(dev->hw)) {
- 		wdma_set(dev, MTK_WDMA_GLO_CFG,
- 			 MTK_WDMA_GLO_CFG_RX_INFO3_PRERES);
- 		return;
- 	}
- 
--	wed_set(dev, MTK_WED_WPDMA_CTRL,
--		MTK_WED_WPDMA_CTRL_SDL1_FIXED);
- 	wed_set(dev, MTK_WED_WPDMA_GLO_CFG,
- 		MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_PKT_PROC |
- 		MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_CRX_SYNC);
-+
-+	if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+		wed_set(dev, MTK_WED_WDMA_RX_PREF_CFG,
-+			FIELD_PREP(MTK_WED_WDMA_RX_PREF_BURST_SIZE, 0x10) |
-+			FIELD_PREP(MTK_WED_WDMA_RX_PREF_LOW_THRES, 0x8));
-+		wed_clr(dev, MTK_WED_WDMA_RX_PREF_CFG,
-+			MTK_WED_WDMA_RX_PREF_DDONE2_EN);
-+		wed_set(dev, MTK_WED_WDMA_RX_PREF_CFG, MTK_WED_WDMA_RX_PREF_EN);
-+
-+		wed_clr(dev, MTK_WED_WPDMA_GLO_CFG,
-+			MTK_WED_WPDMA_GLO_CFG_TX_DDONE_CHK_LAST);
-+		wed_set(dev, MTK_WED_WPDMA_GLO_CFG,
-+			MTK_WED_WPDMA_GLO_CFG_TX_DDONE_CHK |
-+			MTK_WED_WPDMA_GLO_CFG_RX_DRV_EVENT_PKT_FMT_CHK |
-+			MTK_WED_WPDMA_GLO_CFG_RX_DRV_UNS_VER_FORCE_4);
-+
-+		wdma_set(dev, MTK_WDMA_PREF_RX_CFG, MTK_WDMA_PREF_RX_CFG_PREF_EN);
-+	}
-+
- 	wed_clr(dev, MTK_WED_WPDMA_GLO_CFG,
- 		MTK_WED_WPDMA_GLO_CFG_TX_TKID_KEEP |
- 		MTK_WED_WPDMA_GLO_CFG_TX_DMAD_DW3_PREV);
-@@ -1457,11 +1615,22 @@ mtk_wed_dma_enable(struct mtk_wed_device
- 		MTK_WED_WDMA_GLO_CFG_TX_DRV_EN |
- 		MTK_WED_WDMA_GLO_CFG_TX_DDONE_CHK);
- 
-+	wed_clr(dev, MTK_WED_WPDMA_RX_D_GLO_CFG, MTK_WED_WPDMA_RX_D_RXD_READ_LEN);
- 	wed_set(dev, MTK_WED_WPDMA_RX_D_GLO_CFG,
- 		MTK_WED_WPDMA_RX_D_RX_DRV_EN |
- 		FIELD_PREP(MTK_WED_WPDMA_RX_D_RXD_READ_LEN, 0x18) |
--		FIELD_PREP(MTK_WED_WPDMA_RX_D_INIT_PHASE_RXEN_SEL,
--			   0x2));
-+		FIELD_PREP(MTK_WED_WPDMA_RX_D_INIT_PHASE_RXEN_SEL, 0x2));
-+
-+	if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+		wed_set(dev, MTK_WED_WPDMA_RX_D_PREF_CFG,
-+			MTK_WED_WPDMA_RX_D_PREF_EN |
-+			FIELD_PREP(MTK_WED_WPDMA_RX_D_PREF_BURST_SIZE, 0x10) |
-+			FIELD_PREP(MTK_WED_WPDMA_RX_D_PREF_LOW_THRES, 0x8));
-+
-+		wed_set(dev, MTK_WED_RRO_RX_D_CFG(2), MTK_WED_RRO_RX_D_DRV_EN);
-+		wdma_set(dev, MTK_WDMA_PREF_TX_CFG, MTK_WDMA_PREF_TX_CFG_PREF_EN);
-+		wdma_set(dev, MTK_WDMA_WRBK_TX_CFG, MTK_WDMA_WRBK_TX_CFG_WRBK_EN);
-+	}
- 
- 	for (i = 0; i < MTK_WED_RX_QUEUES; i++)
- 		mtk_wed_check_wfdma_rx_fill(dev, i);
-@@ -1501,6 +1670,12 @@ mtk_wed_start(struct mtk_wed_device *dev
- 		wed_r32(dev, MTK_WED_EXT_INT_MASK1);
- 		wed_r32(dev, MTK_WED_EXT_INT_MASK2);
- 
-+		if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+			wed_w32(dev, MTK_WED_EXT_INT_MASK3,
-+				MTK_WED_EXT_INT_STATUS_WPDMA_MID_RDY);
-+			wed_r32(dev, MTK_WED_EXT_INT_MASK3);
-+		}
-+
- 		if (mtk_wed_rro_cfg(dev))
- 			return;
- 	}
-@@ -1552,6 +1727,7 @@ mtk_wed_attach(struct mtk_wed_device *de
- 	dev->irq = hw->irq;
- 	dev->wdma_idx = hw->index;
- 	dev->version = hw->version;
-+	dev->hw->pcie_base = mtk_wed_get_pcie_base(dev);
- 
- 	if (hw->eth->dma_dev == hw->eth->dev &&
- 	    of_dma_is_coherent(hw->eth->dev->of_node))
-@@ -1619,6 +1795,23 @@ mtk_wed_tx_ring_setup(struct mtk_wed_dev
- 	ring->reg_base = MTK_WED_RING_TX(idx);
- 	ring->wpdma = regs;
- 
-+	if (mtk_wed_is_v3_or_greater(dev->hw) && idx == 1) {
-+		/* reset prefetch index */
-+		wed_set(dev, MTK_WED_WDMA_RX_PREF_CFG,
-+			MTK_WED_WDMA_RX_PREF_RX0_SIDX_CLR |
-+			MTK_WED_WDMA_RX_PREF_RX1_SIDX_CLR);
-+
-+		wed_clr(dev, MTK_WED_WDMA_RX_PREF_CFG,
-+			MTK_WED_WDMA_RX_PREF_RX0_SIDX_CLR |
-+			MTK_WED_WDMA_RX_PREF_RX1_SIDX_CLR);
-+
-+		/* reset prefetch FIFO */
-+		wed_w32(dev, MTK_WED_WDMA_RX_PREF_FIFO_CFG,
-+			MTK_WED_WDMA_RX_PREF_FIFO_RX0_CLR |
-+			MTK_WED_WDMA_RX_PREF_FIFO_RX1_CLR);
-+		wed_w32(dev, MTK_WED_WDMA_RX_PREF_FIFO_CFG, 0);
-+	}
-+
- 	/* WED -> WPDMA */
- 	wpdma_tx_w32(dev, idx, MTK_WED_RING_OFS_BASE, ring->desc_phys);
- 	wpdma_tx_w32(dev, idx, MTK_WED_RING_OFS_COUNT, MTK_WED_TX_RING_SIZE);
-@@ -1693,15 +1886,13 @@ mtk_wed_rx_ring_setup(struct mtk_wed_dev
- static u32
- mtk_wed_irq_get(struct mtk_wed_device *dev, u32 mask)
- {
--	u32 val, ext_mask = MTK_WED_EXT_INT_STATUS_ERROR_MASK;
-+	u32 val, ext_mask;
- 
--	if (mtk_wed_is_v1(dev->hw))
--		ext_mask |= MTK_WED_EXT_INT_STATUS_TX_DRV_R_RESP_ERR;
-+	if (mtk_wed_is_v3_or_greater(dev->hw))
-+		ext_mask = MTK_WED_EXT_INT_STATUS_RX_DRV_COHERENT |
-+			   MTK_WED_EXT_INT_STATUS_TKID_WO_PYLD;
- 	else
--		ext_mask |= MTK_WED_EXT_INT_STATUS_RX_FBUF_LO_TH |
--			    MTK_WED_EXT_INT_STATUS_RX_FBUF_HI_TH |
--			    MTK_WED_EXT_INT_STATUS_RX_DRV_COHERENT |
--			    MTK_WED_EXT_INT_STATUS_TX_DMA_W_RESP_ERR;
-+		ext_mask = MTK_WED_EXT_INT_STATUS_ERROR_MASK;
- 
- 	val = wed_r32(dev, MTK_WED_EXT_INT_STATUS);
- 	wed_w32(dev, MTK_WED_EXT_INT_STATUS, val);
-@@ -1942,6 +2133,9 @@ void mtk_wed_add_hw(struct device_node *
- 	case 2:
- 		hw->soc = &mt7986_data;
- 		break;
-+	case 3:
-+		hw->soc = &mt7988_data;
-+		break;
- 	default:
- 	case 1:
- 		hw->mirror = syscon_regmap_lookup_by_phandle(eth_np,
---- a/drivers/net/ethernet/mediatek/mtk_wed.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.h
-@@ -9,6 +9,8 @@
- #include <linux/regmap.h>
- #include <linux/netdevice.h>
- 
-+#include "mtk_wed_regs.h"
-+
- struct mtk_eth;
- struct mtk_wed_wo;
- 
-@@ -19,6 +21,7 @@ struct mtk_wed_soc_data {
- 		u32 reset_idx_tx_mask;
- 		u32 reset_idx_rx_mask;
- 	} regmap;
-+	u32 tx_ring_desc_size;
- 	u32 wdma_desc_size;
- };
- 
-@@ -35,6 +38,7 @@ struct mtk_wed_hw {
- 	struct dentry *debugfs_dir;
- 	struct mtk_wed_device *wed_dev;
- 	struct mtk_wed_wo *wed_wo;
-+	u32 pcie_base;
- 	u32 debugfs_reg;
- 	u32 num_flows;
- 	u8 version;
-@@ -61,6 +65,16 @@ static inline bool mtk_wed_is_v2(struct
- 	return hw->version == 2;
- }
- 
-+static inline bool mtk_wed_is_v3(struct mtk_wed_hw *hw)
-+{
-+	return hw->version == 3;
-+}
-+
-+static inline bool mtk_wed_is_v3_or_greater(struct mtk_wed_hw *hw)
-+{
-+	return hw->version > 2;
-+}
-+
- static inline void
- wed_w32(struct mtk_wed_device *dev, u32 reg, u32 val)
- {
-@@ -143,6 +157,21 @@ wpdma_txfree_w32(struct mtk_wed_device *
- 	writel(val, dev->txfree_ring.wpdma + reg);
- }
- 
-+static inline u32 mtk_wed_get_pcie_base(struct mtk_wed_device *dev)
-+{
-+	if (!mtk_wed_is_v3_or_greater(dev->hw))
-+		return MTK_WED_PCIE_BASE;
-+
-+	switch (dev->hw->index) {
-+	case 1:
-+		return MTK_WED_PCIE_BASE1;
-+	case 2:
-+		return MTK_WED_PCIE_BASE2;
-+	default:
-+		return MTK_WED_PCIE_BASE0;
-+	}
-+}
-+
- void mtk_wed_add_hw(struct device_node *np, struct mtk_eth *eth,
- 		    void __iomem *wdma, phys_addr_t wdma_phy,
- 		    int index);
---- a/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_mcu.c
-@@ -331,10 +331,22 @@ mtk_wed_mcu_load_firmware(struct mtk_wed
- 		wo->hw->index + 1);
- 
- 	/* load firmware */
--	if (of_device_is_compatible(wo->hw->node, "mediatek,mt7981-wed"))
--		fw_name = MT7981_FIRMWARE_WO;
--	else
--		fw_name = wo->hw->index ? MT7986_FIRMWARE_WO1 : MT7986_FIRMWARE_WO0;
-+	switch (wo->hw->version) {
-+	case 2:
-+		if (of_device_is_compatible(wo->hw->node,
-+					    "mediatek,mt7981-wed"))
-+			fw_name = MT7981_FIRMWARE_WO;
-+		else
-+			fw_name = wo->hw->index ? MT7986_FIRMWARE_WO1
-+						: MT7986_FIRMWARE_WO0;
-+		break;
-+	case 3:
-+		fw_name = wo->hw->index ? MT7988_FIRMWARE_WO1
-+					: MT7988_FIRMWARE_WO0;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
- 
- 	ret = request_firmware(&fw, fw_name, wo->hw->dev);
- 	if (ret)
-@@ -355,15 +367,16 @@ mtk_wed_mcu_load_firmware(struct mtk_wed
- 	}
- 
- 	/* set the start address */
--	boot_cr = wo->hw->index ? MTK_WO_MCU_CFG_LS_WA_BOOT_ADDR_ADDR
--				: MTK_WO_MCU_CFG_LS_WM_BOOT_ADDR_ADDR;
-+	if (!mtk_wed_is_v3_or_greater(wo->hw) && wo->hw->index)
-+		boot_cr = MTK_WO_MCU_CFG_LS_WA_BOOT_ADDR_ADDR;
-+	else
-+		boot_cr = MTK_WO_MCU_CFG_LS_WM_BOOT_ADDR_ADDR;
- 	wo_w32(wo, boot_cr, mem_region[MTK_WED_WO_REGION_EMI].phy_addr >> 16);
- 	/* wo firmware reset */
- 	wo_w32(wo, MTK_WO_MCU_CFG_LS_WF_MCCR_CLR_ADDR, 0xc00);
- 
--	val = wo_r32(wo, MTK_WO_MCU_CFG_LS_WF_MCU_CFG_WM_WA_ADDR);
--	val |= wo->hw->index ? MTK_WO_MCU_CFG_LS_WF_WM_WA_WA_CPU_RSTB_MASK
--			     : MTK_WO_MCU_CFG_LS_WF_WM_WA_WM_CPU_RSTB_MASK;
-+	val = wo_r32(wo, MTK_WO_MCU_CFG_LS_WF_MCU_CFG_WM_WA_ADDR) |
-+	      MTK_WO_MCU_CFG_LS_WF_WM_WA_WM_CPU_RSTB_MASK;
- 	wo_w32(wo, MTK_WO_MCU_CFG_LS_WF_MCU_CFG_WM_WA_ADDR, val);
- out:
- 	release_firmware(fw);
-@@ -398,3 +411,5 @@ int mtk_wed_mcu_init(struct mtk_wed_wo *
- MODULE_FIRMWARE(MT7981_FIRMWARE_WO);
- MODULE_FIRMWARE(MT7986_FIRMWARE_WO0);
- MODULE_FIRMWARE(MT7986_FIRMWARE_WO1);
-+MODULE_FIRMWARE(MT7988_FIRMWARE_WO0);
-+MODULE_FIRMWARE(MT7988_FIRMWARE_WO1);
---- a/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -13,6 +13,9 @@
- #define MTK_WDMA_DESC_CTRL_LAST_SEG0		BIT(30)
- #define MTK_WDMA_DESC_CTRL_DMA_DONE		BIT(31)
- 
-+#define MTK_WDMA_TXD0_DESC_INFO_DMA_DONE	BIT(29)
-+#define MTK_WDMA_TXD1_DESC_INFO_DMA_DONE	BIT(31)
-+
- struct mtk_wdma_desc {
- 	__le32 buf0;
- 	__le32 ctrl;
-@@ -37,6 +40,7 @@ struct mtk_wdma_desc {
- #define MTK_WED_RESET_WDMA_INT_AGENT			BIT(19)
- #define MTK_WED_RESET_RX_RRO_QM				BIT(20)
- #define MTK_WED_RESET_RX_ROUTE_QM			BIT(21)
-+#define MTK_WED_RESET_TX_AMSDU				BIT(22)
- #define MTK_WED_RESET_WED				BIT(31)
- 
- #define MTK_WED_CTRL					0x00c
-@@ -44,6 +48,9 @@ struct mtk_wdma_desc {
- #define MTK_WED_CTRL_WPDMA_INT_AGENT_BUSY		BIT(1)
- #define MTK_WED_CTRL_WDMA_INT_AGENT_EN			BIT(2)
- #define MTK_WED_CTRL_WDMA_INT_AGENT_BUSY		BIT(3)
-+#define MTK_WED_CTRL_WED_RX_IND_CMD_EN			BIT(5)
-+#define MTK_WED_CTRL_WED_RX_PG_BM_EN			BIT(6)
-+#define MTK_WED_CTRL_WED_RX_PG_BM_BUSY			BIT(7)
- #define MTK_WED_CTRL_WED_TX_BM_EN			BIT(8)
- #define MTK_WED_CTRL_WED_TX_BM_BUSY			BIT(9)
- #define MTK_WED_CTRL_WED_TX_FREE_AGENT_EN		BIT(10)
-@@ -54,9 +61,14 @@ struct mtk_wdma_desc {
- #define MTK_WED_CTRL_RX_RRO_QM_BUSY			BIT(15)
- #define MTK_WED_CTRL_RX_ROUTE_QM_EN			BIT(16)
- #define MTK_WED_CTRL_RX_ROUTE_QM_BUSY			BIT(17)
-+#define MTK_WED_CTRL_TX_TKID_ALI_EN			BIT(20)
-+#define MTK_WED_CTRL_TX_TKID_ALI_BUSY			BIT(21)
-+#define MTK_WED_CTRL_TX_AMSDU_EN			BIT(22)
-+#define MTK_WED_CTRL_TX_AMSDU_BUSY			BIT(23)
- #define MTK_WED_CTRL_FINAL_DIDX_READ			BIT(24)
- #define MTK_WED_CTRL_ETH_DMAD_FMT			BIT(25)
- #define MTK_WED_CTRL_MIB_READ_CLEAR			BIT(28)
-+#define MTK_WED_CTRL_FLD_MIB_RD_CLR			BIT(28)
- 
- #define MTK_WED_EXT_INT_STATUS				0x020
- #define MTK_WED_EXT_INT_STATUS_TF_LEN_ERR		BIT(0)
-@@ -89,6 +101,7 @@ struct mtk_wdma_desc {
- #define MTK_WED_EXT_INT_MASK				0x028
- #define MTK_WED_EXT_INT_MASK1				0x02c
- #define MTK_WED_EXT_INT_MASK2				0x030
-+#define MTK_WED_EXT_INT_MASK3				0x034
- 
- #define MTK_WED_STATUS					0x060
- #define MTK_WED_STATUS_TX				GENMASK(15, 8)
-@@ -96,9 +109,14 @@ struct mtk_wdma_desc {
- #define MTK_WED_TX_BM_CTRL				0x080
- #define MTK_WED_TX_BM_CTRL_VLD_GRP_NUM			GENMASK(6, 0)
- #define MTK_WED_TX_BM_CTRL_RSV_GRP_NUM			GENMASK(22, 16)
-+#define MTK_WED_TX_BM_CTRL_LEGACY_EN			BIT(26)
-+#define MTK_WED_TX_TKID_CTRL_FREE_FORMAT		BIT(27)
- #define MTK_WED_TX_BM_CTRL_PAUSE			BIT(28)
- 
- #define MTK_WED_TX_BM_BASE				0x084
-+#define MTK_WED_TX_BM_INIT_PTR				0x088
-+#define MTK_WED_TX_BM_SW_TAIL_IDX			GENMASK(16, 0)
-+#define MTK_WED_TX_BM_INIT_SW_TAIL_IDX			BIT(16)
- 
- #define MTK_WED_TX_BM_TKID_START			GENMASK(15, 0)
- #define MTK_WED_TX_BM_TKID_END				GENMASK(31, 16)
-@@ -122,6 +140,9 @@ struct mtk_wdma_desc {
- #define MTK_WED_TX_TKID_CTRL_RSV_GRP_NUM		GENMASK(22, 16)
- #define MTK_WED_TX_TKID_CTRL_PAUSE			BIT(28)
- 
-+#define MTK_WED_TX_TKID_CTRL_VLD_GRP_NUM_V3		GENMASK(7, 0)
-+#define MTK_WED_TX_TKID_CTRL_RSV_GRP_NUM_V3		GENMASK(23, 16)
-+
- #define MTK_WED_TX_TKID_DYN_THR				0x0e0
- #define MTK_WED_TX_TKID_DYN_THR_LO			GENMASK(6, 0)
- #define MTK_WED_TX_TKID_DYN_THR_HI			GENMASK(22, 16)
-@@ -199,12 +220,15 @@ struct mtk_wdma_desc {
- #define MTK_WED_WPDMA_GLO_CFG_RX_DRV_R1_PKT_PROC	BIT(5)
- #define MTK_WED_WPDMA_GLO_CFG_RX_DRV_R0_CRX_SYNC	BIT(6)
- #define MTK_WED_WPDMA_GLO_CFG_RX_DRV_R1_CRX_SYNC	BIT(7)
--#define MTK_WED_WPDMA_GLO_CFG_RX_DRV_EVENT_PKT_FMT_VER	GENMASK(18, 16)
-+#define MTK_WED_WPDMA_GLO_CFG_RX_DRV_EVENT_PKT_FMT_VER	GENMASK(15, 12)
-+#define MTK_WED_WPDMA_GLO_CFG_RX_DRV_UNS_VER_FORCE_4	BIT(18)
- #define MTK_WED_WPDMA_GLO_CFG_RX_DRV_UNSUPPORT_FMT	BIT(19)
--#define MTK_WED_WPDMA_GLO_CFG_RX_DRV_UEVENT_PKT_FMT_CHK BIT(20)
-+#define MTK_WED_WPDMA_GLO_CFG_RX_DRV_EVENT_PKT_FMT_CHK	BIT(20)
- #define MTK_WED_WPDMA_GLO_CFG_RX_DDONE2_WR		BIT(21)
- #define MTK_WED_WPDMA_GLO_CFG_TX_TKID_KEEP		BIT(24)
-+#define MTK_WED_WPDMA_GLO_CFG_TX_DDONE_CHK_LAST		BIT(25)
- #define MTK_WED_WPDMA_GLO_CFG_TX_DMAD_DW3_PREV		BIT(28)
-+#define MTK_WED_WPDMA_GLO_CFG_TX_DDONE_CHK		BIT(30)
- 
- #define MTK_WED_WPDMA_RESET_IDX				0x50c
- #define MTK_WED_WPDMA_RESET_IDX_TX			GENMASK(3, 0)
-@@ -250,9 +274,10 @@ struct mtk_wdma_desc {
- #define MTK_WED_PCIE_INT_TRIGGER_STATUS			BIT(16)
- 
- #define MTK_WED_PCIE_INT_CTRL				0x57c
--#define MTK_WED_PCIE_INT_CTRL_MSK_EN_POLA		BIT(20)
--#define MTK_WED_PCIE_INT_CTRL_SRC_SEL			GENMASK(17, 16)
- #define MTK_WED_PCIE_INT_CTRL_POLL_EN			GENMASK(13, 12)
-+#define MTK_WED_PCIE_INT_CTRL_SRC_SEL			GENMASK(17, 16)
-+#define MTK_WED_PCIE_INT_CTRL_MSK_EN_POLA		BIT(20)
-+#define MTK_WED_PCIE_INT_CTRL_MSK_IRQ_FILTER		BIT(21)
- 
- #define MTK_WED_WPDMA_CFG_BASE				0x580
- #define MTK_WED_WPDMA_CFG_INT_MASK			0x584
-@@ -286,6 +311,20 @@ struct mtk_wdma_desc {
- #define MTK_WED_WPDMA_RX_D_PROCESSED_MIB(_n)		(0x784 + (_n) * 4)
- #define MTK_WED_WPDMA_RX_D_COHERENT_MIB			0x78c
- 
-+#define MTK_WED_WPDMA_RX_D_PREF_CFG			0x7b4
-+#define MTK_WED_WPDMA_RX_D_PREF_EN			BIT(0)
-+#define MTK_WED_WPDMA_RX_D_PREF_BURST_SIZE		GENMASK(12, 8)
-+#define MTK_WED_WPDMA_RX_D_PREF_LOW_THRES		GENMASK(21, 16)
-+
-+#define MTK_WED_WPDMA_RX_D_PREF_RX0_SIDX		0x7b8
-+#define MTK_WED_WPDMA_RX_D_PREF_SIDX_IDX_CLR		BIT(15)
-+
-+#define MTK_WED_WPDMA_RX_D_PREF_RX1_SIDX		0x7bc
-+
-+#define MTK_WED_WPDMA_RX_D_PREF_FIFO_CFG		0x7c0
-+#define MTK_WED_WPDMA_RX_D_PREF_FIFO_CFG_R0_CLR		BIT(0)
-+#define MTK_WED_WPDMA_RX_D_PREF_FIFO_CFG_R1_CLR		BIT(16)
-+
- #define MTK_WED_WDMA_RING_TX				0x800
- 
- #define MTK_WED_WDMA_TX_MIB				0x810
-@@ -293,6 +332,18 @@ struct mtk_wdma_desc {
- #define MTK_WED_WDMA_RING_RX(_n)			(0x900 + (_n) * 0x10)
- #define MTK_WED_WDMA_RX_THRES(_n)			(0x940 + (_n) * 0x4)
- 
-+#define MTK_WED_WDMA_RX_PREF_CFG			0x950
-+#define MTK_WED_WDMA_RX_PREF_EN				BIT(0)
-+#define MTK_WED_WDMA_RX_PREF_BURST_SIZE			GENMASK(12, 8)
-+#define MTK_WED_WDMA_RX_PREF_LOW_THRES			GENMASK(21, 16)
-+#define MTK_WED_WDMA_RX_PREF_RX0_SIDX_CLR		BIT(24)
-+#define MTK_WED_WDMA_RX_PREF_RX1_SIDX_CLR		BIT(25)
-+#define MTK_WED_WDMA_RX_PREF_DDONE2_EN			BIT(26)
-+
-+#define MTK_WED_WDMA_RX_PREF_FIFO_CFG			0x95C
-+#define MTK_WED_WDMA_RX_PREF_FIFO_RX0_CLR		BIT(0)
-+#define MTK_WED_WDMA_RX_PREF_FIFO_RX1_CLR		BIT(16)
-+
- #define MTK_WED_WDMA_GLO_CFG				0xa04
- #define MTK_WED_WDMA_GLO_CFG_TX_DRV_EN			BIT(0)
- #define MTK_WED_WDMA_GLO_CFG_TX_DDONE_CHK		BIT(1)
-@@ -325,6 +376,7 @@ struct mtk_wdma_desc {
- #define MTK_WED_WDMA_INT_TRIGGER_RX_DONE		GENMASK(17, 16)
- 
- #define MTK_WED_WDMA_INT_CTRL				0xa2c
-+#define MTK_WED_WDMA_INT_POLL_PRD			GENMASK(7, 0)
- #define MTK_WED_WDMA_INT_CTRL_POLL_SRC_SEL		GENMASK(17, 16)
- 
- #define MTK_WED_WDMA_CFG_BASE				0xaa0
-@@ -388,6 +440,18 @@ struct mtk_wdma_desc {
- #define MTK_WDMA_INT_GRP1				0x250
- #define MTK_WDMA_INT_GRP2				0x254
- 
-+#define MTK_WDMA_PREF_TX_CFG				0x2d0
-+#define MTK_WDMA_PREF_TX_CFG_PREF_EN			BIT(0)
-+
-+#define MTK_WDMA_PREF_RX_CFG				0x2dc
-+#define MTK_WDMA_PREF_RX_CFG_PREF_EN			BIT(0)
-+
-+#define MTK_WDMA_WRBK_TX_CFG				0x300
-+#define MTK_WDMA_WRBK_TX_CFG_WRBK_EN			BIT(30)
-+
-+#define MTK_WDMA_WRBK_RX_CFG				0x344
-+#define MTK_WDMA_WRBK_RX_CFG_WRBK_EN			BIT(30)
-+
- #define MTK_PCIE_MIRROR_MAP(n)				((n) ? 0x4 : 0x0)
- #define MTK_PCIE_MIRROR_MAP_EN				BIT(0)
- #define MTK_PCIE_MIRROR_MAP_WED_ID			BIT(1)
-@@ -401,6 +465,30 @@ struct mtk_wdma_desc {
- #define MTK_WED_RTQM_Q_DBG_BYPASS			BIT(5)
- #define MTK_WED_RTQM_TXDMAD_FPORT			GENMASK(23, 20)
- 
-+#define MTK_WED_RTQM_IGRS0_I2HW_DMAD_CNT		0xb1c
-+#define MTK_WED_RTQM_IGRS0_I2H_DMAD_CNT(_n)		(0xb20 + (_n) * 0x4)
-+#define	MTK_WED_RTQM_IGRS0_I2HW_PKT_CNT			0xb28
-+#define MTK_WED_RTQM_IGRS0_I2H_PKT_CNT(_n)		(0xb2c + (_n) * 0x4)
-+#define MTK_WED_RTQM_IGRS0_FDROP_CNT			0xb34
-+
-+#define MTK_WED_RTQM_IGRS1_I2HW_DMAD_CNT		0xb44
-+#define MTK_WED_RTQM_IGRS1_I2H_DMAD_CNT(_n)		(0xb48 + (_n) * 0x4)
-+#define MTK_WED_RTQM_IGRS1_I2HW_PKT_CNT			0xb50
-+#define MTK_WED_RTQM_IGRS1_I2H_PKT_CNT(_n)		(0xb54 + (_n) * 0x4)
-+#define MTK_WED_RTQM_IGRS1_FDROP_CNT			0xb5c
-+
-+#define MTK_WED_RTQM_IGRS2_I2HW_DMAD_CNT		0xb6c
-+#define MTK_WED_RTQM_IGRS2_I2H_DMAD_CNT(_n)		(0xb70 + (_n) * 0x4)
-+#define MTK_WED_RTQM_IGRS2_I2HW_PKT_CNT			0xb78
-+#define MTK_WED_RTQM_IGRS2_I2H_PKT_CNT(_n)		(0xb7c + (_n) * 0x4)
-+#define MTK_WED_RTQM_IGRS2_FDROP_CNT			0xb84
-+
-+#define MTK_WED_RTQM_IGRS3_I2HW_DMAD_CNT		0xb94
-+#define MTK_WED_RTQM_IGRS3_I2H_DMAD_CNT(_n)		(0xb98 + (_n) * 0x4)
-+#define MTK_WED_RTQM_IGRS3_I2HW_PKT_CNT			0xba0
-+#define MTK_WED_RTQM_IGRS3_I2H_PKT_CNT(_n)		(0xba4 + (_n) * 0x4)
-+#define MTK_WED_RTQM_IGRS3_FDROP_CNT			0xbac
-+
- #define MTK_WED_RTQM_R2H_MIB(_n)			(0xb70 + (_n) * 0x4)
- #define MTK_WED_RTQM_R2Q_MIB(_n)			(0xb78 + (_n) * 0x4)
- #define MTK_WED_RTQM_Q2N_MIB				0xb80
-@@ -409,6 +497,24 @@ struct mtk_wdma_desc {
- #define MTK_WED_RTQM_Q2B_MIB				0xb8c
- #define MTK_WED_RTQM_PFDBK_MIB				0xb90
- 
-+#define MTK_WED_RTQM_ENQ_CFG0				0xbb8
-+#define MTK_WED_RTQM_ENQ_CFG_TXDMAD_FPORT		GENMASK(15, 12)
-+
-+#define MTK_WED_RTQM_FDROP_MIB				0xb84
-+#define MTK_WED_RTQM_ENQ_I2Q_DMAD_CNT			0xbbc
-+#define MTK_WED_RTQM_ENQ_I2N_DMAD_CNT			0xbc0
-+#define MTK_WED_RTQM_ENQ_I2Q_PKT_CNT			0xbc4
-+#define MTK_WED_RTQM_ENQ_I2N_PKT_CNT			0xbc8
-+#define MTK_WED_RTQM_ENQ_USED_ENTRY_CNT			0xbcc
-+#define MTK_WED_RTQM_ENQ_ERR_CNT			0xbd0
-+
-+#define MTK_WED_RTQM_DEQ_DMAD_CNT			0xbd8
-+#define MTK_WED_RTQM_DEQ_Q2I_DMAD_CNT			0xbdc
-+#define MTK_WED_RTQM_DEQ_PKT_CNT			0xbe0
-+#define MTK_WED_RTQM_DEQ_Q2I_PKT_CNT			0xbe4
-+#define MTK_WED_RTQM_DEQ_USED_PFDBK_CNT			0xbe8
-+#define MTK_WED_RTQM_DEQ_ERR_CNT			0xbec
-+
- #define MTK_WED_RROQM_GLO_CFG				0xc04
- #define MTK_WED_RROQM_RST_IDX				0xc08
- #define MTK_WED_RROQM_RST_IDX_MIOD			BIT(0)
-@@ -458,7 +564,116 @@ struct mtk_wdma_desc {
- #define MTK_WED_RX_BM_INTF				0xd9c
- #define MTK_WED_RX_BM_ERR_STS				0xda8
- 
-+#define MTK_RRO_IND_CMD_SIGNATURE			0xe00
-+#define MTK_RRO_IND_CMD_DMA_IDX				GENMASK(11, 0)
-+#define MTK_RRO_IND_CMD_MAGIC_CNT			GENMASK(30, 28)
-+
-+#define MTK_WED_IND_CMD_RX_CTRL0			0xe04
-+#define MTK_WED_IND_CMD_PROC_IDX			GENMASK(11, 0)
-+#define MTK_WED_IND_CMD_PREFETCH_FREE_CNT		GENMASK(19, 16)
-+#define MTK_WED_IND_CMD_MAGIC_CNT			GENMASK(30, 28)
-+
-+#define MTK_WED_IND_CMD_RX_CTRL1			0xe08
-+#define MTK_WED_IND_CMD_RX_CTRL2			0xe0c
-+#define MTK_WED_IND_CMD_MAX_CNT				GENMASK(11, 0)
-+#define MTK_WED_IND_CMD_BASE_M				GENMASK(19, 16)
-+
-+#define MTK_WED_RRO_CFG0				0xe10
-+#define MTK_WED_RRO_CFG1				0xe14
-+#define MTK_WED_RRO_CFG1_MAX_WIN_SZ			GENMASK(31, 29)
-+#define MTK_WED_RRO_CFG1_ACK_SN_BASE_M			GENMASK(19, 16)
-+#define MTK_WED_RRO_CFG1_PARTICL_SE_ID			GENMASK(11, 0)
-+
-+#define MTK_WED_ADDR_ELEM_CFG0				0xe18
-+#define MTK_WED_ADDR_ELEM_CFG1				0xe1c
-+#define MTK_WED_ADDR_ELEM_PREFETCH_FREE_CNT		GENMASK(19, 16)
-+
-+#define MTK_WED_ADDR_ELEM_TBL_CFG			0xe20
-+#define MTK_WED_ADDR_ELEM_TBL_OFFSET			GENMASK(6, 0)
-+#define MTK_WED_ADDR_ELEM_TBL_RD_RDY			BIT(28)
-+#define MTK_WED_ADDR_ELEM_TBL_WR_RDY			BIT(29)
-+#define MTK_WED_ADDR_ELEM_TBL_RD			BIT(30)
-+#define MTK_WED_ADDR_ELEM_TBL_WR			BIT(31)
-+
-+#define MTK_WED_RADDR_ELEM_TBL_WDATA			0xe24
-+#define MTK_WED_RADDR_ELEM_TBL_RDATA			0xe28
-+
-+#define MTK_WED_PN_CHECK_CFG				0xe30
-+#define MTK_WED_PN_CHECK_SE_ID				GENMASK(11, 0)
-+#define MTK_WED_PN_CHECK_RD_RDY				BIT(28)
-+#define MTK_WED_PN_CHECK_WR_RDY				BIT(29)
-+#define MTK_WED_PN_CHECK_RD				BIT(30)
-+#define MTK_WED_PN_CHECK_WR				BIT(31)
-+
-+#define MTK_WED_PN_CHECK_WDATA_M			0xe38
-+#define MTK_WED_PN_CHECK_IS_FIRST			BIT(17)
-+
-+#define MTK_WED_RRO_MSDU_PG_RING_CFG(_n)		(0xe44 + (_n) * 0x8)
-+
-+#define MTK_WED_RRO_MSDU_PG_RING2_CFG			0xe58
-+#define MTK_WED_RRO_MSDU_PG_DRV_CLR			BIT(26)
-+#define MTK_WED_RRO_MSDU_PG_DRV_EN			BIT(31)
-+
-+#define MTK_WED_RRO_MSDU_PG_CTRL0(_n)			(0xe5c + (_n) * 0xc)
-+#define MTK_WED_RRO_MSDU_PG_CTRL1(_n)			(0xe60 + (_n) * 0xc)
-+#define MTK_WED_RRO_MSDU_PG_CTRL2(_n)			(0xe64 + (_n) * 0xc)
-+
-+#define MTK_WED_RRO_RX_D_RX(_n)				(0xe80 + (_n) * 0x10)
-+
-+#define MTK_WED_RRO_RX_MAGIC_CNT			BIT(13)
-+
-+#define MTK_WED_RRO_RX_D_CFG(_n)			(0xea0 + (_n) * 0x4)
-+#define MTK_WED_RRO_RX_D_DRV_CLR			BIT(26)
-+#define MTK_WED_RRO_RX_D_DRV_EN				BIT(31)
-+
-+#define MTK_WED_RRO_PG_BM_RX_DMAM			0xeb0
-+#define MTK_WED_RRO_PG_BM_RX_SDL0			GENMASK(13, 0)
-+
-+#define MTK_WED_RRO_PG_BM_BASE				0xeb4
-+#define MTK_WED_RRO_PG_BM_INIT_PTR			0xeb8
-+#define MTK_WED_RRO_PG_BM_SW_TAIL_IDX			GENMASK(15, 0)
-+#define MTK_WED_RRO_PG_BM_INIT_SW_TAIL_IDX		BIT(16)
-+
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_RX			0xeec
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_RX0_EN		BIT(0)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_RX0_CLR		BIT(1)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_RX0_DONE_TRIG	GENMASK(6, 2)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_RX1_EN		BIT(8)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_RX1_CLR		BIT(9)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_RX1_DONE_TRIG	GENMASK(14, 10)
-+
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_MSDU_PG		0xef4
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_PG0_EN		BIT(0)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_PG0_CLR		BIT(1)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_PG0_DONE_TRIG	GENMASK(6, 2)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_PG1_EN		BIT(8)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_PG1_CLR		BIT(9)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_PG1_DONE_TRIG	GENMASK(14, 10)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_PG2_EN		BIT(16)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_PG2_CLR		BIT(17)
-+#define MTK_WED_WPDMA_INT_CTRL_RRO_PG2_DONE_TRIG	GENMASK(22, 18)
-+
-+#define MTK_WED_RX_IND_CMD_CNT0				0xf20
-+#define MTK_WED_RX_IND_CMD_DBG_CNT_EN			BIT(31)
-+
-+#define MTK_WED_RX_IND_CMD_CNT(_n)			(0xf20 + (_n) * 0x4)
-+#define MTK_WED_IND_CMD_MAGIC_CNT_FAIL_CNT		GENMASK(15, 0)
-+
-+#define MTK_WED_RX_ADDR_ELEM_CNT(_n)			(0xf48 + (_n) * 0x4)
-+#define MTK_WED_ADDR_ELEM_SIG_FAIL_CNT			GENMASK(15, 0)
-+#define MTK_WED_ADDR_ELEM_FIRST_SIG_FAIL_CNT		GENMASK(31, 16)
-+#define MTK_WED_ADDR_ELEM_ACKSN_CNT			GENMASK(27, 0)
-+
-+#define MTK_WED_RX_MSDU_PG_CNT(_n)			(0xf5c + (_n) * 0x4)
-+
-+#define MTK_WED_RX_PN_CHK_CNT				0xf70
-+#define MTK_WED_PN_CHK_FAIL_CNT				GENMASK(15, 0)
-+
- #define MTK_WED_WOCPU_VIEW_MIOD_BASE			0x8000
- #define MTK_WED_PCIE_INT_MASK				0x0
- 
-+#define MTK_WED_PCIE_BASE			0x11280000
-+#define MTK_WED_PCIE_BASE0			0x11300000
-+#define MTK_WED_PCIE_BASE1			0x11310000
-+#define MTK_WED_PCIE_BASE2			0x11290000
- #endif
---- a/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_wo.h
-@@ -91,6 +91,8 @@ enum mtk_wed_dummy_cr_idx {
- #define MT7981_FIRMWARE_WO	"mediatek/mt7981_wo.bin"
- #define MT7986_FIRMWARE_WO0	"mediatek/mt7986_wo_0.bin"
- #define MT7986_FIRMWARE_WO1	"mediatek/mt7986_wo_1.bin"
-+#define MT7988_FIRMWARE_WO0	"mediatek/mt7988_wo_0.bin"
-+#define MT7988_FIRMWARE_WO1	"mediatek/mt7988_wo_1.bin"
- 
- #define MTK_WO_MCU_CFG_LS_BASE				0
- #define MTK_WO_MCU_CFG_LS_HW_VER_ADDR			(MTK_WO_MCU_CFG_LS_BASE + 0x000)
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -139,6 +139,8 @@ struct mtk_wed_device {
- 		u32 wpdma_rx;
- 
- 		bool wcid_512;
-+		bool hw_rro;
-+		bool msi;
- 
- 		u16 token_start;
- 		unsigned int nbuf;
-@@ -212,10 +214,12 @@ mtk_wed_device_attach(struct mtk_wed_dev
- 	return ret;
- }
- 
--static inline bool
--mtk_wed_get_rx_capa(struct mtk_wed_device *dev)
-+static inline bool mtk_wed_get_rx_capa(struct mtk_wed_device *dev)
- {
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
-+	if (dev->version == 3)
-+		return dev->wlan.hw_rro;
-+
- 	return dev->version != 1;
- #else
- 	return false;
diff --git a/target/linux/generic/backport-6.1/752-15-v6.7-net-ethernet-mtk_wed-refactor-mtk_wed_check_wfdma_rx.patch b/target/linux/generic/backport-6.1/752-15-v6.7-net-ethernet-mtk_wed-refactor-mtk_wed_check_wfdma_rx.patch
deleted file mode 100644
index e91ae69d0811..000000000000
--- a/target/linux/generic/backport-6.1/752-15-v6.7-net-ethernet-mtk_wed-refactor-mtk_wed_check_wfdma_rx.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 18 Sep 2023 12:29:14 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: refactor mtk_wed_check_wfdma_rx_fill
- routine
-
-Refactor mtk_wed_check_wfdma_rx_fill() in order to be reused adding HW
-receive offload support for MT7988 SoC.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -585,22 +585,15 @@ mtk_wed_set_512_support(struct mtk_wed_d
- 	}
- }
- 
--#define MTK_WFMDA_RX_DMA_EN	BIT(2)
--static void
--mtk_wed_check_wfdma_rx_fill(struct mtk_wed_device *dev, int idx)
-+static int
-+mtk_wed_check_wfdma_rx_fill(struct mtk_wed_device *dev,
-+			    struct mtk_wed_ring *ring)
- {
--	u32 val;
- 	int i;
- 
--	if (!(dev->rx_ring[idx].flags & MTK_WED_RING_CONFIGURED))
--		return; /* queue is not configured by mt76 */
--
- 	for (i = 0; i < 3; i++) {
--		u32 cur_idx;
-+		u32 cur_idx = readl(ring->wpdma + MTK_WED_RING_OFS_CPU_IDX);
- 
--		cur_idx = wed_r32(dev,
--				  MTK_WED_WPDMA_RING_RX_DATA(idx) +
--				  MTK_WED_RING_OFS_CPU_IDX);
- 		if (cur_idx == MTK_WED_RX_RING_SIZE - 1)
- 			break;
- 
-@@ -609,12 +602,10 @@ mtk_wed_check_wfdma_rx_fill(struct mtk_w
- 
- 	if (i == 3) {
- 		dev_err(dev->hw->dev, "rx dma enable failed\n");
--		return;
-+		return -ETIMEDOUT;
- 	}
- 
--	val = wifi_r32(dev, dev->wlan.wpdma_rx_glo - dev->wlan.phy_base) |
--	      MTK_WFMDA_RX_DMA_EN;
--	wifi_w32(dev, dev->wlan.wpdma_rx_glo - dev->wlan.phy_base, val);
-+	return 0;
- }
- 
- static void
-@@ -1545,6 +1536,7 @@ mtk_wed_configure_irq(struct mtk_wed_dev
- 	wed_w32(dev, MTK_WED_INT_MASK, irq_mask);
- }
- 
-+#define MTK_WFMDA_RX_DMA_EN	BIT(2)
- static void
- mtk_wed_dma_enable(struct mtk_wed_device *dev)
- {
-@@ -1632,8 +1624,26 @@ mtk_wed_dma_enable(struct mtk_wed_device
- 		wdma_set(dev, MTK_WDMA_WRBK_TX_CFG, MTK_WDMA_WRBK_TX_CFG_WRBK_EN);
- 	}
- 
--	for (i = 0; i < MTK_WED_RX_QUEUES; i++)
--		mtk_wed_check_wfdma_rx_fill(dev, i);
-+	for (i = 0; i < MTK_WED_RX_QUEUES; i++) {
-+		struct mtk_wed_ring *ring = &dev->rx_ring[i];
-+		u32 val;
-+
-+		if (!(ring->flags & MTK_WED_RING_CONFIGURED))
-+			continue; /* queue is not configured by mt76 */
-+
-+		if (mtk_wed_check_wfdma_rx_fill(dev, ring)) {
-+			dev_err(dev->hw->dev,
-+				"rx_ring(%d) dma enable failed\n", i);
-+			continue;
-+		}
-+
-+		val = wifi_r32(dev,
-+			       dev->wlan.wpdma_rx_glo -
-+			       dev->wlan.phy_base) | MTK_WFMDA_RX_DMA_EN;
-+		wifi_w32(dev,
-+			 dev->wlan.wpdma_rx_glo - dev->wlan.phy_base,
-+			 val);
-+	}
- }
- 
- static void
diff --git a/target/linux/generic/backport-6.1/752-16-v6.7-net-ethernet-mtk_wed-introduce-partial-AMSDU-offload.patch b/target/linux/generic/backport-6.1/752-16-v6.7-net-ethernet-mtk_wed-introduce-partial-AMSDU-offload.patch
deleted file mode 100644
index 6534d73d8e76..000000000000
--- a/target/linux/generic/backport-6.1/752-16-v6.7-net-ethernet-mtk_wed-introduce-partial-AMSDU-offload.patch
+++ /dev/null
@@ -1,465 +0,0 @@
-From: Sujuan Chen <sujuan.chen@mediatek.com>
-Date: Mon, 18 Sep 2023 12:29:15 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: introduce partial AMSDU offload
- support for MT7988
-
-Introduce partial AMSDU offload support for MT7988 SoC in order to merge
-in hw packets belonging to the same AMSDU before passing them to the
-WLAN nic.
-
-Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -438,7 +438,8 @@ int mtk_foe_entry_set_pppoe(struct mtk_e
- }
- 
- int mtk_foe_entry_set_wdma(struct mtk_eth *eth, struct mtk_foe_entry *entry,
--			   int wdma_idx, int txq, int bss, int wcid)
-+			   int wdma_idx, int txq, int bss, int wcid,
-+			   bool amsdu_en)
- {
- 	struct mtk_foe_mac_info *l2 = mtk_foe_entry_l2(eth, entry);
- 	u32 *ib2 = mtk_foe_entry_ib2(eth, entry);
-@@ -450,6 +451,7 @@ int mtk_foe_entry_set_wdma(struct mtk_et
- 			 MTK_FOE_IB2_WDMA_WINFO_V2;
- 		l2->w3info = FIELD_PREP(MTK_FOE_WINFO_WCID_V3, wcid) |
- 			     FIELD_PREP(MTK_FOE_WINFO_BSS_V3, bss);
-+		l2->amsdu = FIELD_PREP(MTK_FOE_WINFO_AMSDU_EN, amsdu_en);
- 		break;
- 	case 2:
- 		*ib2 &= ~MTK_FOE_IB2_PORT_MG_V2;
---- a/drivers/net/ethernet/mediatek/mtk_ppe.h
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.h
-@@ -88,13 +88,13 @@ enum {
- #define MTK_FOE_WINFO_BSS_V3		GENMASK(23, 16)
- #define MTK_FOE_WINFO_WCID_V3		GENMASK(15, 0)
- 
--#define MTK_FOE_WINFO_PAO_USR_INFO	GENMASK(15, 0)
--#define MTK_FOE_WINFO_PAO_TID		GENMASK(19, 16)
--#define MTK_FOE_WINFO_PAO_IS_FIXEDRATE	BIT(20)
--#define MTK_FOE_WINFO_PAO_IS_PRIOR	BIT(21)
--#define MTK_FOE_WINFO_PAO_IS_SP		BIT(22)
--#define MTK_FOE_WINFO_PAO_HF		BIT(23)
--#define MTK_FOE_WINFO_PAO_AMSDU_EN	BIT(24)
-+#define MTK_FOE_WINFO_AMSDU_USR_INFO	GENMASK(15, 0)
-+#define MTK_FOE_WINFO_AMSDU_TID		GENMASK(19, 16)
-+#define MTK_FOE_WINFO_AMSDU_IS_FIXEDRATE	BIT(20)
-+#define MTK_FOE_WINFO_AMSDU_IS_PRIOR	BIT(21)
-+#define MTK_FOE_WINFO_AMSDU_IS_SP	BIT(22)
-+#define MTK_FOE_WINFO_AMSDU_HF		BIT(23)
-+#define MTK_FOE_WINFO_AMSDU_EN		BIT(24)
- 
- enum {
- 	MTK_FOE_STATE_INVALID,
-@@ -123,7 +123,7 @@ struct mtk_foe_mac_info {
- 
- 	/* netsys_v3 */
- 	u32 w3info;
--	u32 wpao;
-+	u32 amsdu;
- };
- 
- /* software-only entry type */
-@@ -394,7 +394,8 @@ int mtk_foe_entry_set_vlan(struct mtk_et
- int mtk_foe_entry_set_pppoe(struct mtk_eth *eth, struct mtk_foe_entry *entry,
- 			    int sid);
- int mtk_foe_entry_set_wdma(struct mtk_eth *eth, struct mtk_foe_entry *entry,
--			   int wdma_idx, int txq, int bss, int wcid);
-+			   int wdma_idx, int txq, int bss, int wcid,
-+			   bool amsdu_en);
- int mtk_foe_entry_set_queue(struct mtk_eth *eth, struct mtk_foe_entry *entry,
- 			    unsigned int queue);
- int mtk_foe_entry_commit(struct mtk_ppe *ppe, struct mtk_flow_entry *entry);
---- a/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe_offload.c
-@@ -111,6 +111,7 @@ mtk_flow_get_wdma_info(struct net_device
- 	info->queue = path->mtk_wdma.queue;
- 	info->bss = path->mtk_wdma.bss;
- 	info->wcid = path->mtk_wdma.wcid;
-+	info->amsdu = path->mtk_wdma.amsdu;
- 
- 	return 0;
- }
-@@ -192,7 +193,7 @@ mtk_flow_set_output_device(struct mtk_et
- 
- 	if (mtk_flow_get_wdma_info(dev, dest_mac, &info) == 0) {
- 		mtk_foe_entry_set_wdma(eth, foe, info.wdma_idx, info.queue,
--				       info.bss, info.wcid);
-+				       info.bss, info.wcid, info.amsdu);
- 		if (mtk_is_netsys_v2_or_greater(eth)) {
- 			switch (info.wdma_idx) {
- 			case 0:
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -29,6 +29,8 @@
- #define MTK_WED_RX_PAGE_BUF_PER_PAGE	(PAGE_SIZE / 128)
- #define MTK_WED_RX_RING_SIZE		1536
- #define MTK_WED_RX_PG_BM_CNT		8192
-+#define MTK_WED_AMSDU_BUF_SIZE		(PAGE_SIZE << 4)
-+#define MTK_WED_AMSDU_NPAGES		32
- 
- #define MTK_WED_TX_RING_SIZE		2048
- #define MTK_WED_WDMA_RING_SIZE		1024
-@@ -172,6 +174,23 @@ mtk_wdma_rx_reset(struct mtk_wed_device
- 	return ret;
- }
- 
-+static u32
-+mtk_wed_check_busy(struct mtk_wed_device *dev, u32 reg, u32 mask)
-+{
-+	return !!(wed_r32(dev, reg) & mask);
-+}
-+
-+static int
-+mtk_wed_poll_busy(struct mtk_wed_device *dev, u32 reg, u32 mask)
-+{
-+	int sleep = 15000;
-+	int timeout = 100 * sleep;
-+	u32 val;
-+
-+	return read_poll_timeout(mtk_wed_check_busy, val, !val, sleep,
-+				 timeout, false, dev, reg, mask);
-+}
-+
- static void
- mtk_wdma_tx_reset(struct mtk_wed_device *dev)
- {
-@@ -335,6 +354,118 @@ out:
- }
- 
- static int
-+mtk_wed_amsdu_buffer_alloc(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wed_hw *hw = dev->hw;
-+	struct mtk_wed_amsdu *wed_amsdu;
-+	int i;
-+
-+	if (!mtk_wed_is_v3_or_greater(hw))
-+		return 0;
-+
-+	wed_amsdu = devm_kcalloc(hw->dev, MTK_WED_AMSDU_NPAGES,
-+				 sizeof(*wed_amsdu), GFP_KERNEL);
-+	if (!wed_amsdu)
-+		return -ENOMEM;
-+
-+	for (i = 0; i < MTK_WED_AMSDU_NPAGES; i++) {
-+		void *ptr;
-+
-+		/* each segment is 64K */
-+		ptr = (void *)__get_free_pages(GFP_KERNEL | __GFP_NOWARN |
-+					       __GFP_ZERO | __GFP_COMP |
-+					       GFP_DMA32,
-+					       get_order(MTK_WED_AMSDU_BUF_SIZE));
-+		if (!ptr)
-+			goto error;
-+
-+		wed_amsdu[i].txd = ptr;
-+		wed_amsdu[i].txd_phy = dma_map_single(hw->dev, ptr,
-+						      MTK_WED_AMSDU_BUF_SIZE,
-+						      DMA_TO_DEVICE);
-+		if (dma_mapping_error(hw->dev, wed_amsdu[i].txd_phy))
-+			goto error;
-+	}
-+	dev->hw->wed_amsdu = wed_amsdu;
-+
-+	return 0;
-+
-+error:
-+	for (i--; i >= 0; i--)
-+		dma_unmap_single(hw->dev, wed_amsdu[i].txd_phy,
-+				 MTK_WED_AMSDU_BUF_SIZE, DMA_TO_DEVICE);
-+	return -ENOMEM;
-+}
-+
-+static void
-+mtk_wed_amsdu_free_buffer(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wed_amsdu *wed_amsdu = dev->hw->wed_amsdu;
-+	int i;
-+
-+	if (!wed_amsdu)
-+		return;
-+
-+	for (i = 0; i < MTK_WED_AMSDU_NPAGES; i++) {
-+		dma_unmap_single(dev->hw->dev, wed_amsdu[i].txd_phy,
-+				 MTK_WED_AMSDU_BUF_SIZE, DMA_TO_DEVICE);
-+		free_pages((unsigned long)wed_amsdu[i].txd,
-+			   get_order(MTK_WED_AMSDU_BUF_SIZE));
-+	}
-+}
-+
-+static int
-+mtk_wed_amsdu_init(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wed_amsdu *wed_amsdu = dev->hw->wed_amsdu;
-+	int i, ret;
-+
-+	if (!wed_amsdu)
-+		return 0;
-+
-+	for (i = 0; i < MTK_WED_AMSDU_NPAGES; i++)
-+		wed_w32(dev, MTK_WED_AMSDU_HIFTXD_BASE_L(i),
-+			wed_amsdu[i].txd_phy);
-+
-+	/* init all sta parameter */
-+	wed_w32(dev, MTK_WED_AMSDU_STA_INFO_INIT, MTK_WED_AMSDU_STA_RMVL |
-+		MTK_WED_AMSDU_STA_WTBL_HDRT_MODE |
-+		FIELD_PREP(MTK_WED_AMSDU_STA_MAX_AMSDU_LEN,
-+			   dev->wlan.amsdu_max_len >> 8) |
-+		FIELD_PREP(MTK_WED_AMSDU_STA_MAX_AMSDU_NUM,
-+			   dev->wlan.amsdu_max_subframes));
-+
-+	wed_w32(dev, MTK_WED_AMSDU_STA_INFO, MTK_WED_AMSDU_STA_INFO_DO_INIT);
-+
-+	ret = mtk_wed_poll_busy(dev, MTK_WED_AMSDU_STA_INFO,
-+				MTK_WED_AMSDU_STA_INFO_DO_INIT);
-+	if (ret) {
-+		dev_err(dev->hw->dev, "amsdu initialization failed\n");
-+		return ret;
-+	}
-+
-+	/* init partial amsdu offload txd src */
-+	wed_set(dev, MTK_WED_AMSDU_HIFTXD_CFG,
-+		FIELD_PREP(MTK_WED_AMSDU_HIFTXD_SRC, dev->hw->index));
-+
-+	/* init qmem */
-+	wed_set(dev, MTK_WED_AMSDU_PSE, MTK_WED_AMSDU_PSE_RESET);
-+	ret = mtk_wed_poll_busy(dev, MTK_WED_MON_AMSDU_QMEM_STS1, BIT(29));
-+	if (ret) {
-+		pr_info("%s: amsdu qmem initialization failed\n", __func__);
-+		return ret;
-+	}
-+
-+	/* eagle E1 PCIE1 tx ring 22 flow control issue */
-+	if (dev->wlan.id == 0x7991)
-+		wed_clr(dev, MTK_WED_AMSDU_FIFO, MTK_WED_AMSDU_IS_PRIOR0_RING);
-+
-+	wed_set(dev, MTK_WED_CTRL, MTK_WED_CTRL_TX_AMSDU_EN);
-+
-+	return 0;
-+}
-+
-+static int
- mtk_wed_tx_buffer_alloc(struct mtk_wed_device *dev)
- {
- 	u32 desc_size = dev->hw->soc->tx_ring_desc_size;
-@@ -708,6 +839,7 @@ __mtk_wed_detach(struct mtk_wed_device *
- 
- 	mtk_wdma_rx_reset(dev);
- 	mtk_wed_reset(dev, MTK_WED_RESET_WED);
-+	mtk_wed_amsdu_free_buffer(dev);
- 	mtk_wed_free_tx_buffer(dev);
- 	mtk_wed_free_tx_rings(dev);
- 
-@@ -1128,23 +1260,6 @@ mtk_wed_ring_reset(struct mtk_wed_ring *
- 	}
- }
- 
--static u32
--mtk_wed_check_busy(struct mtk_wed_device *dev, u32 reg, u32 mask)
--{
--	return !!(wed_r32(dev, reg) & mask);
--}
--
--static int
--mtk_wed_poll_busy(struct mtk_wed_device *dev, u32 reg, u32 mask)
--{
--	int sleep = 15000;
--	int timeout = 100 * sleep;
--	u32 val;
--
--	return read_poll_timeout(mtk_wed_check_busy, val, !val, sleep,
--				 timeout, false, dev, reg, mask);
--}
--
- static int
- mtk_wed_rx_reset(struct mtk_wed_device *dev)
- {
-@@ -1691,6 +1806,7 @@ mtk_wed_start(struct mtk_wed_device *dev
- 	}
- 
- 	mtk_wed_set_512_support(dev, dev->wlan.wcid_512);
-+	mtk_wed_amsdu_init(dev);
- 
- 	mtk_wed_dma_enable(dev);
- 	dev->running = true;
-@@ -1747,6 +1863,10 @@ mtk_wed_attach(struct mtk_wed_device *de
- 	if (ret)
- 		goto out;
- 
-+	ret = mtk_wed_amsdu_buffer_alloc(dev);
-+	if (ret)
-+		goto out;
-+
- 	if (mtk_wed_get_rx_capa(dev)) {
- 		ret = mtk_wed_rro_alloc(dev);
- 		if (ret)
---- a/drivers/net/ethernet/mediatek/mtk_wed.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.h
-@@ -25,6 +25,11 @@ struct mtk_wed_soc_data {
- 	u32 wdma_desc_size;
- };
- 
-+struct mtk_wed_amsdu {
-+	void *txd;
-+	dma_addr_t txd_phy;
-+};
-+
- struct mtk_wed_hw {
- 	const struct mtk_wed_soc_data *soc;
- 	struct device_node *node;
-@@ -38,6 +43,7 @@ struct mtk_wed_hw {
- 	struct dentry *debugfs_dir;
- 	struct mtk_wed_device *wed_dev;
- 	struct mtk_wed_wo *wed_wo;
-+	struct mtk_wed_amsdu *wed_amsdu;
- 	u32 pcie_base;
- 	u32 debugfs_reg;
- 	u32 num_flows;
-@@ -52,6 +58,7 @@ struct mtk_wdma_info {
- 	u8 queue;
- 	u16 wcid;
- 	u8 bss;
-+	u8 amsdu;
- };
- 
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
---- a/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -672,6 +672,82 @@ struct mtk_wdma_desc {
- #define MTK_WED_WOCPU_VIEW_MIOD_BASE			0x8000
- #define MTK_WED_PCIE_INT_MASK				0x0
- 
-+#define MTK_WED_AMSDU_FIFO				0x1800
-+#define MTK_WED_AMSDU_IS_PRIOR0_RING			BIT(10)
-+
-+#define MTK_WED_AMSDU_STA_INFO				0x01810
-+#define MTK_WED_AMSDU_STA_INFO_DO_INIT			BIT(0)
-+#define MTK_WED_AMSDU_STA_INFO_SET_INIT			BIT(1)
-+
-+#define MTK_WED_AMSDU_STA_INFO_INIT			0x01814
-+#define MTK_WED_AMSDU_STA_WTBL_HDRT_MODE		BIT(0)
-+#define MTK_WED_AMSDU_STA_RMVL				BIT(1)
-+#define MTK_WED_AMSDU_STA_MAX_AMSDU_LEN			GENMASK(7, 2)
-+#define MTK_WED_AMSDU_STA_MAX_AMSDU_NUM			GENMASK(11, 8)
-+
-+#define MTK_WED_AMSDU_HIFTXD_BASE_L(_n)			(0x1980 + (_n) * 0x4)
-+
-+#define MTK_WED_AMSDU_PSE				0x1910
-+#define MTK_WED_AMSDU_PSE_RESET				BIT(16)
-+
-+#define MTK_WED_AMSDU_HIFTXD_CFG			0x1968
-+#define MTK_WED_AMSDU_HIFTXD_SRC			GENMASK(16, 15)
-+
-+#define MTK_WED_MON_AMSDU_FIFO_DMAD			0x1a34
-+
-+#define MTK_WED_MON_AMSDU_ENG_DMAD(_n)			(0x1a80 + (_n) * 0x50)
-+#define MTK_WED_MON_AMSDU_ENG_QFPL(_n)			(0x1a84 + (_n) * 0x50)
-+#define MTK_WED_MON_AMSDU_ENG_QENI(_n)			(0x1a88 + (_n) * 0x50)
-+#define MTK_WED_MON_AMSDU_ENG_QENO(_n)			(0x1a8c + (_n) * 0x50)
-+#define MTK_WED_MON_AMSDU_ENG_MERG(_n)			(0x1a90 + (_n) * 0x50)
-+
-+#define MTK_WED_MON_AMSDU_ENG_CNT8(_n)			(0x1a94 + (_n) * 0x50)
-+#define MTK_WED_AMSDU_ENG_MAX_QGPP_CNT			GENMASK(10, 0)
-+#define MTK_WED_AMSDU_ENG_MAX_PL_CNT			GENMASK(27, 16)
-+
-+#define MTK_WED_MON_AMSDU_ENG_CNT9(_n)			(0x1a98 + (_n) * 0x50)
-+#define MTK_WED_AMSDU_ENG_CUR_ENTRY			GENMASK(10, 0)
-+#define MTK_WED_AMSDU_ENG_MAX_BUF_MERGED		GENMASK(20, 16)
-+#define MTK_WED_AMSDU_ENG_MAX_MSDU_MERGED		GENMASK(28, 24)
-+
-+#define MTK_WED_MON_AMSDU_QMEM_STS1			0x1e04
-+
-+#define MTK_WED_MON_AMSDU_QMEM_CNT(_n)			(0x1e0c + (_n) * 0x4)
-+#define MTK_WED_AMSDU_QMEM_FQ_CNT			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_SP_QCNT			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID0_QCNT			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID1_QCNT			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID2_QCNT			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID3_QCNT			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID4_QCNT			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID5_QCNT			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID6_QCNT			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID7_QCNT			GENMASK(11, 0)
-+
-+#define MTK_WED_MON_AMSDU_QMEM_PTR(_n)			(0x1e20 + (_n) * 0x4)
-+#define MTK_WED_AMSDU_QMEM_FQ_HEAD			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_SP_QHEAD			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID0_QHEAD			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID1_QHEAD			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID2_QHEAD			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID3_QHEAD			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID4_QHEAD			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID5_QHEAD			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID6_QHEAD			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID7_QHEAD			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_FQ_TAIL			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_SP_QTAIL			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID0_QTAIL			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID1_QTAIL			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID2_QTAIL			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID3_QTAIL			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID4_QTAIL			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID5_QTAIL			GENMASK(11, 0)
-+#define MTK_WED_AMSDU_QMEM_TID6_QTAIL			GENMASK(27, 16)
-+#define MTK_WED_AMSDU_QMEM_TID7_QTAIL			GENMASK(11, 0)
-+
-+#define MTK_WED_MON_AMSDU_HIFTXD_FETCH_MSDU(_n)		(0x1ec4 + (_n) * 0x4)
-+
- #define MTK_WED_PCIE_BASE			0x11280000
- #define MTK_WED_PCIE_BASE0			0x11300000
- #define MTK_WED_PCIE_BASE1			0x11310000
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -928,6 +928,7 @@ struct net_device_path {
- 			u8 queue;
- 			u16 wcid;
- 			u8 bss;
-+			u8 amsdu;
- 		} mtk_wdma;
- 	};
- };
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -129,6 +129,7 @@ struct mtk_wed_device {
- 		enum mtk_wed_bus_tye bus_type;
- 		void __iomem *base;
- 		u32 phy_base;
-+		u32 id;
- 
- 		u32 wpdma_phys;
- 		u32 wpdma_int;
-@@ -147,10 +148,12 @@ struct mtk_wed_device {
- 		unsigned int rx_nbuf;
- 		unsigned int rx_npkt;
- 		unsigned int rx_size;
-+		unsigned int amsdu_max_len;
- 
- 		u8 tx_tbit[MTK_WED_TX_QUEUES];
- 		u8 rx_tbit[MTK_WED_RX_QUEUES];
- 		u8 txfree_tbit;
-+		u8 amsdu_max_subframes;
- 
- 		u32 (*init_buf)(void *ptr, dma_addr_t phys, int token_id);
- 		int (*offload_enable)(struct mtk_wed_device *wed);
-@@ -224,6 +227,15 @@ static inline bool mtk_wed_get_rx_capa(s
- #else
- 	return false;
- #endif
-+}
-+
-+static inline bool mtk_wed_is_amsdu_supported(struct mtk_wed_device *dev)
-+{
-+#ifdef CONFIG_NET_MEDIATEK_SOC_WED
-+	return dev->version == 3;
-+#else
-+	return false;
-+#endif
- }
- 
- #ifdef CONFIG_NET_MEDIATEK_SOC_WED
diff --git a/target/linux/generic/backport-6.1/752-17-v6.7-net-ethernet-mtk_wed-introduce-hw_rro-support-for-MT.patch b/target/linux/generic/backport-6.1/752-17-v6.7-net-ethernet-mtk_wed-introduce-hw_rro-support-for-MT.patch
deleted file mode 100644
index 0cf4c188757e..000000000000
--- a/target/linux/generic/backport-6.1/752-17-v6.7-net-ethernet-mtk_wed-introduce-hw_rro-support-for-MT.patch
+++ /dev/null
@@ -1,483 +0,0 @@
-From: Sujuan Chen <sujuan.chen@mediatek.com>
-Date: Mon, 18 Sep 2023 12:29:16 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: introduce hw_rro support for MT7988
-
-MT7988 SoC support 802.11 receive reordering offload in hw while
-MT7986 SoC implements it through the firmware running on the mcu.
-
-Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -26,7 +26,7 @@
- #define MTK_WED_BUF_SIZE		2048
- #define MTK_WED_PAGE_BUF_SIZE		128
- #define MTK_WED_BUF_PER_PAGE		(PAGE_SIZE / 2048)
--#define MTK_WED_RX_PAGE_BUF_PER_PAGE	(PAGE_SIZE / 128)
-+#define MTK_WED_RX_BUF_PER_PAGE		(PAGE_SIZE / MTK_WED_PAGE_BUF_SIZE)
- #define MTK_WED_RX_RING_SIZE		1536
- #define MTK_WED_RX_PG_BM_CNT		8192
- #define MTK_WED_AMSDU_BUF_SIZE		(PAGE_SIZE << 4)
-@@ -596,6 +596,68 @@ free_pagelist:
- }
- 
- static int
-+mtk_wed_hwrro_buffer_alloc(struct mtk_wed_device *dev)
-+{
-+	int n_pages = MTK_WED_RX_PG_BM_CNT / MTK_WED_RX_BUF_PER_PAGE;
-+	struct mtk_wed_buf *page_list;
-+	struct mtk_wed_bm_desc *desc;
-+	dma_addr_t desc_phys;
-+	int i, page_idx = 0;
-+
-+	if (!dev->wlan.hw_rro)
-+		return 0;
-+
-+	page_list = kcalloc(n_pages, sizeof(*page_list), GFP_KERNEL);
-+	if (!page_list)
-+		return -ENOMEM;
-+
-+	dev->hw_rro.size = dev->wlan.rx_nbuf & ~(MTK_WED_BUF_PER_PAGE - 1);
-+	dev->hw_rro.pages = page_list;
-+	desc = dma_alloc_coherent(dev->hw->dev,
-+				  dev->wlan.rx_nbuf * sizeof(*desc),
-+				  &desc_phys, GFP_KERNEL);
-+	if (!desc)
-+		return -ENOMEM;
-+
-+	dev->hw_rro.desc = desc;
-+	dev->hw_rro.desc_phys = desc_phys;
-+
-+	for (i = 0; i < MTK_WED_RX_PG_BM_CNT; i += MTK_WED_RX_BUF_PER_PAGE) {
-+		dma_addr_t page_phys, buf_phys;
-+		struct page *page;
-+		int s;
-+
-+		page = __dev_alloc_page(GFP_KERNEL);
-+		if (!page)
-+			return -ENOMEM;
-+
-+		page_phys = dma_map_page(dev->hw->dev, page, 0, PAGE_SIZE,
-+					 DMA_BIDIRECTIONAL);
-+		if (dma_mapping_error(dev->hw->dev, page_phys)) {
-+			__free_page(page);
-+			return -ENOMEM;
-+		}
-+
-+		page_list[page_idx].p = page;
-+		page_list[page_idx++].phy_addr = page_phys;
-+		dma_sync_single_for_cpu(dev->hw->dev, page_phys, PAGE_SIZE,
-+					DMA_BIDIRECTIONAL);
-+
-+		buf_phys = page_phys;
-+		for (s = 0; s < MTK_WED_RX_BUF_PER_PAGE; s++) {
-+			desc->buf0 = cpu_to_le32(buf_phys);
-+			buf_phys += MTK_WED_PAGE_BUF_SIZE;
-+			desc++;
-+		}
-+
-+		dma_sync_single_for_device(dev->hw->dev, page_phys, PAGE_SIZE,
-+					   DMA_BIDIRECTIONAL);
-+	}
-+
-+	return 0;
-+}
-+
-+static int
- mtk_wed_rx_buffer_alloc(struct mtk_wed_device *dev)
- {
- 	struct mtk_wed_bm_desc *desc;
-@@ -612,7 +674,42 @@ mtk_wed_rx_buffer_alloc(struct mtk_wed_d
- 	dev->rx_buf_ring.desc_phys = desc_phys;
- 	dev->wlan.init_rx_buf(dev, dev->wlan.rx_npkt);
- 
--	return 0;
-+	return mtk_wed_hwrro_buffer_alloc(dev);
-+}
-+
-+static void
-+mtk_wed_hwrro_free_buffer(struct mtk_wed_device *dev)
-+{
-+	struct mtk_wed_buf *page_list = dev->hw_rro.pages;
-+	struct mtk_wed_bm_desc *desc = dev->hw_rro.desc;
-+	int i, page_idx = 0;
-+
-+	if (!dev->wlan.hw_rro)
-+		return;
-+
-+	if (!page_list)
-+		return;
-+
-+	if (!desc)
-+		goto free_pagelist;
-+
-+	for (i = 0; i < MTK_WED_RX_PG_BM_CNT; i += MTK_WED_RX_BUF_PER_PAGE) {
-+		dma_addr_t buf_addr = page_list[page_idx].phy_addr;
-+		void *page = page_list[page_idx++].p;
-+
-+		if (!page)
-+			break;
-+
-+		dma_unmap_page(dev->hw->dev, buf_addr, PAGE_SIZE,
-+			       DMA_BIDIRECTIONAL);
-+		__free_page(page);
-+	}
-+
-+	dma_free_coherent(dev->hw->dev, dev->hw_rro.size * sizeof(*desc),
-+			  desc, dev->hw_rro.desc_phys);
-+
-+free_pagelist:
-+	kfree(page_list);
- }
- 
- static void
-@@ -626,6 +723,28 @@ mtk_wed_free_rx_buffer(struct mtk_wed_de
- 	dev->wlan.release_rx_buf(dev);
- 	dma_free_coherent(dev->hw->dev, dev->rx_buf_ring.size * sizeof(*desc),
- 			  desc, dev->rx_buf_ring.desc_phys);
-+
-+	mtk_wed_hwrro_free_buffer(dev);
-+}
-+
-+static void
-+mtk_wed_hwrro_init(struct mtk_wed_device *dev)
-+{
-+	if (!mtk_wed_get_rx_capa(dev) || !dev->wlan.hw_rro)
-+		return;
-+
-+	wed_set(dev, MTK_WED_RRO_PG_BM_RX_DMAM,
-+		FIELD_PREP(MTK_WED_RRO_PG_BM_RX_SDL0, 128));
-+
-+	wed_w32(dev, MTK_WED_RRO_PG_BM_BASE, dev->hw_rro.desc_phys);
-+
-+	wed_w32(dev, MTK_WED_RRO_PG_BM_INIT_PTR,
-+		MTK_WED_RRO_PG_BM_INIT_SW_TAIL_IDX |
-+		FIELD_PREP(MTK_WED_RRO_PG_BM_SW_TAIL_IDX,
-+			   MTK_WED_RX_PG_BM_CNT));
-+
-+	/* enable rx_page_bm to fetch dmad */
-+	wed_set(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_RX_PG_BM_EN);
- }
- 
- static void
-@@ -639,6 +758,8 @@ mtk_wed_rx_buffer_hw_init(struct mtk_wed
- 	wed_w32(dev, MTK_WED_RX_BM_DYN_ALLOC_TH,
- 		FIELD_PREP(MTK_WED_RX_BM_DYN_ALLOC_TH_H, 0xffff));
- 	wed_set(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_RX_BM_EN);
-+
-+	mtk_wed_hwrro_init(dev);
- }
- 
- static void
-@@ -934,6 +1055,8 @@ mtk_wed_bus_init(struct mtk_wed_device *
- static void
- mtk_wed_set_wpdma(struct mtk_wed_device *dev)
- {
-+	int i;
-+
- 	if (mtk_wed_is_v1(dev->hw)) {
- 		wed_w32(dev, MTK_WED_WPDMA_CFG_BASE,  dev->wlan.wpdma_phys);
- 		return;
-@@ -951,6 +1074,15 @@ mtk_wed_set_wpdma(struct mtk_wed_device
- 
- 	wed_w32(dev, MTK_WED_WPDMA_RX_GLO_CFG, dev->wlan.wpdma_rx_glo);
- 	wed_w32(dev, dev->hw->soc->regmap.wpdma_rx_ring0, dev->wlan.wpdma_rx);
-+
-+	if (!dev->wlan.hw_rro)
-+		return;
-+
-+	wed_w32(dev, MTK_WED_RRO_RX_D_CFG(0), dev->wlan.wpdma_rx_rro[0]);
-+	wed_w32(dev, MTK_WED_RRO_RX_D_CFG(1), dev->wlan.wpdma_rx_rro[1]);
-+	for (i = 0; i < MTK_WED_RX_PAGE_QUEUES; i++)
-+		wed_w32(dev, MTK_WED_RRO_MSDU_PG_RING_CFG(i),
-+			dev->wlan.wpdma_rx_pg + i * 0x10);
- }
- 
- static void
-@@ -1762,6 +1894,165 @@ mtk_wed_dma_enable(struct mtk_wed_device
- }
- 
- static void
-+mtk_wed_start_hw_rro(struct mtk_wed_device *dev, u32 irq_mask, bool reset)
-+{
-+	int i;
-+
-+	wed_w32(dev, MTK_WED_WPDMA_INT_MASK, irq_mask);
-+	wed_w32(dev, MTK_WED_INT_MASK, irq_mask);
-+
-+	if (!mtk_wed_get_rx_capa(dev) || !dev->wlan.hw_rro)
-+		return;
-+
-+	wed_set(dev, MTK_WED_RRO_RX_D_CFG(2), MTK_WED_RRO_MSDU_PG_DRV_CLR);
-+	wed_w32(dev, MTK_WED_RRO_MSDU_PG_RING2_CFG,
-+		MTK_WED_RRO_MSDU_PG_DRV_CLR);
-+
-+	wed_w32(dev, MTK_WED_WPDMA_INT_CTRL_RRO_RX,
-+		MTK_WED_WPDMA_INT_CTRL_RRO_RX0_EN |
-+		MTK_WED_WPDMA_INT_CTRL_RRO_RX0_CLR |
-+		MTK_WED_WPDMA_INT_CTRL_RRO_RX1_EN |
-+		MTK_WED_WPDMA_INT_CTRL_RRO_RX1_CLR |
-+		FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RRO_RX0_DONE_TRIG,
-+			   dev->wlan.rro_rx_tbit[0]) |
-+		FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RRO_RX1_DONE_TRIG,
-+			   dev->wlan.rro_rx_tbit[1]));
-+
-+	wed_w32(dev, MTK_WED_WPDMA_INT_CTRL_RRO_MSDU_PG,
-+		MTK_WED_WPDMA_INT_CTRL_RRO_PG0_EN |
-+		MTK_WED_WPDMA_INT_CTRL_RRO_PG0_CLR |
-+		MTK_WED_WPDMA_INT_CTRL_RRO_PG1_EN |
-+		MTK_WED_WPDMA_INT_CTRL_RRO_PG1_CLR |
-+		MTK_WED_WPDMA_INT_CTRL_RRO_PG2_EN |
-+		MTK_WED_WPDMA_INT_CTRL_RRO_PG2_CLR |
-+		FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RRO_PG0_DONE_TRIG,
-+			   dev->wlan.rx_pg_tbit[0]) |
-+		FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RRO_PG1_DONE_TRIG,
-+			   dev->wlan.rx_pg_tbit[1]) |
-+		FIELD_PREP(MTK_WED_WPDMA_INT_CTRL_RRO_PG2_DONE_TRIG,
-+			   dev->wlan.rx_pg_tbit[2]));
-+
-+	/* RRO_MSDU_PG_RING2_CFG1_FLD_DRV_EN should be enabled after
-+	 * WM FWDL completed, otherwise RRO_MSDU_PG ring may broken
-+	 */
-+	wed_set(dev, MTK_WED_RRO_MSDU_PG_RING2_CFG,
-+		MTK_WED_RRO_MSDU_PG_DRV_EN);
-+
-+	for (i = 0; i < MTK_WED_RX_QUEUES; i++) {
-+		struct mtk_wed_ring *ring = &dev->rx_rro_ring[i];
-+
-+		if (!(ring->flags & MTK_WED_RING_CONFIGURED))
-+			continue;
-+
-+		if (mtk_wed_check_wfdma_rx_fill(dev, ring))
-+			dev_err(dev->hw->dev,
-+				"rx_rro_ring(%d) initialization failed\n", i);
-+	}
-+
-+	for (i = 0; i < MTK_WED_RX_PAGE_QUEUES; i++) {
-+		struct mtk_wed_ring *ring = &dev->rx_page_ring[i];
-+
-+		if (!(ring->flags & MTK_WED_RING_CONFIGURED))
-+			continue;
-+
-+		if (mtk_wed_check_wfdma_rx_fill(dev, ring))
-+			dev_err(dev->hw->dev,
-+				"rx_page_ring(%d) initialization failed\n", i);
-+	}
-+}
-+
-+static void
-+mtk_wed_rro_rx_ring_setup(struct mtk_wed_device *dev, int idx,
-+			  void __iomem *regs)
-+{
-+	struct mtk_wed_ring *ring = &dev->rx_rro_ring[idx];
-+
-+	ring->wpdma = regs;
-+	wed_w32(dev, MTK_WED_RRO_RX_D_RX(idx) + MTK_WED_RING_OFS_BASE,
-+		readl(regs));
-+	wed_w32(dev, MTK_WED_RRO_RX_D_RX(idx) + MTK_WED_RING_OFS_COUNT,
-+		readl(regs + MTK_WED_RING_OFS_COUNT));
-+	ring->flags |= MTK_WED_RING_CONFIGURED;
-+}
-+
-+static void
-+mtk_wed_msdu_pg_rx_ring_setup(struct mtk_wed_device *dev, int idx, void __iomem *regs)
-+{
-+	struct mtk_wed_ring *ring = &dev->rx_page_ring[idx];
-+
-+	ring->wpdma = regs;
-+	wed_w32(dev, MTK_WED_RRO_MSDU_PG_CTRL0(idx) + MTK_WED_RING_OFS_BASE,
-+		readl(regs));
-+	wed_w32(dev, MTK_WED_RRO_MSDU_PG_CTRL0(idx) + MTK_WED_RING_OFS_COUNT,
-+		readl(regs + MTK_WED_RING_OFS_COUNT));
-+	ring->flags |= MTK_WED_RING_CONFIGURED;
-+}
-+
-+static int
-+mtk_wed_ind_rx_ring_setup(struct mtk_wed_device *dev, void __iomem *regs)
-+{
-+	struct mtk_wed_ring *ring = &dev->ind_cmd_ring;
-+	u32 val = readl(regs + MTK_WED_RING_OFS_COUNT);
-+	int i, count = 0;
-+
-+	ring->wpdma = regs;
-+	wed_w32(dev, MTK_WED_IND_CMD_RX_CTRL1 + MTK_WED_RING_OFS_BASE,
-+		readl(regs) & 0xfffffff0);
-+
-+	wed_w32(dev, MTK_WED_IND_CMD_RX_CTRL1 + MTK_WED_RING_OFS_COUNT,
-+		readl(regs + MTK_WED_RING_OFS_COUNT));
-+
-+	/* ack sn cr */
-+	wed_w32(dev, MTK_WED_RRO_CFG0, dev->wlan.phy_base +
-+		dev->wlan.ind_cmd.ack_sn_addr);
-+	wed_w32(dev, MTK_WED_RRO_CFG1,
-+		FIELD_PREP(MTK_WED_RRO_CFG1_MAX_WIN_SZ,
-+			   dev->wlan.ind_cmd.win_size) |
-+		FIELD_PREP(MTK_WED_RRO_CFG1_PARTICL_SE_ID,
-+			   dev->wlan.ind_cmd.particular_sid));
-+
-+	/* particular session addr element */
-+	wed_w32(dev, MTK_WED_ADDR_ELEM_CFG0,
-+		dev->wlan.ind_cmd.particular_se_phys);
-+
-+	for (i = 0; i < dev->wlan.ind_cmd.se_group_nums; i++) {
-+		wed_w32(dev, MTK_WED_RADDR_ELEM_TBL_WDATA,
-+			dev->wlan.ind_cmd.addr_elem_phys[i] >> 4);
-+		wed_w32(dev, MTK_WED_ADDR_ELEM_TBL_CFG,
-+			MTK_WED_ADDR_ELEM_TBL_WR | (i & 0x7f));
-+
-+		val = wed_r32(dev, MTK_WED_ADDR_ELEM_TBL_CFG);
-+		while (!(val & MTK_WED_ADDR_ELEM_TBL_WR_RDY) && count++ < 100)
-+			val = wed_r32(dev, MTK_WED_ADDR_ELEM_TBL_CFG);
-+		if (count >= 100)
-+			dev_err(dev->hw->dev,
-+				"write ba session base failed\n");
-+	}
-+
-+	/* pn check init */
-+	for (i = 0; i < dev->wlan.ind_cmd.particular_sid; i++) {
-+		wed_w32(dev, MTK_WED_PN_CHECK_WDATA_M,
-+			MTK_WED_PN_CHECK_IS_FIRST);
-+
-+		wed_w32(dev, MTK_WED_PN_CHECK_CFG, MTK_WED_PN_CHECK_WR |
-+			FIELD_PREP(MTK_WED_PN_CHECK_SE_ID, i));
-+
-+		count = 0;
-+		val = wed_r32(dev, MTK_WED_PN_CHECK_CFG);
-+		while (!(val & MTK_WED_PN_CHECK_WR_RDY) && count++ < 100)
-+			val = wed_r32(dev, MTK_WED_PN_CHECK_CFG);
-+		if (count >= 100)
-+			dev_err(dev->hw->dev,
-+				"session(%d) initialization failed\n", i);
-+	}
-+
-+	wed_w32(dev, MTK_WED_RX_IND_CMD_CNT0, MTK_WED_RX_IND_CMD_DBG_CNT_EN);
-+	wed_set(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_RX_IND_CMD_EN);
-+
-+	return 0;
-+}
-+
-+static void
- mtk_wed_start(struct mtk_wed_device *dev, u32 irq_mask)
- {
- 	int i;
-@@ -2215,6 +2506,10 @@ void mtk_wed_add_hw(struct device_node *
- 		.detach = mtk_wed_detach,
- 		.ppe_check = mtk_wed_ppe_check,
- 		.setup_tc = mtk_wed_setup_tc,
-+		.start_hw_rro = mtk_wed_start_hw_rro,
-+		.rro_rx_ring_setup = mtk_wed_rro_rx_ring_setup,
-+		.msdu_pg_rx_ring_setup = mtk_wed_msdu_pg_rx_ring_setup,
-+		.ind_rx_ring_setup = mtk_wed_ind_rx_ring_setup,
- 	};
- 	struct device_node *eth_np = eth->dev->of_node;
- 	struct platform_device *pdev;
---- a/include/linux/soc/mediatek/mtk_wed.h
-+++ b/include/linux/soc/mediatek/mtk_wed.h
-@@ -10,6 +10,7 @@
- 
- #define MTK_WED_TX_QUEUES		2
- #define MTK_WED_RX_QUEUES		2
-+#define MTK_WED_RX_PAGE_QUEUES		3
- 
- #define WED_WO_STA_REC			0x6
- 
-@@ -99,6 +100,9 @@ struct mtk_wed_device {
- 	struct mtk_wed_ring txfree_ring;
- 	struct mtk_wed_ring tx_wdma[MTK_WED_TX_QUEUES];
- 	struct mtk_wed_ring rx_wdma[MTK_WED_RX_QUEUES];
-+	struct mtk_wed_ring rx_rro_ring[MTK_WED_RX_QUEUES];
-+	struct mtk_wed_ring rx_page_ring[MTK_WED_RX_PAGE_QUEUES];
-+	struct mtk_wed_ring ind_cmd_ring;
- 
- 	struct {
- 		int size;
-@@ -120,6 +124,13 @@ struct mtk_wed_device {
- 		dma_addr_t fdbk_phys;
- 	} rro;
- 
-+	struct {
-+		int size;
-+		struct mtk_wed_buf *pages;
-+		struct mtk_wed_bm_desc *desc;
-+		dma_addr_t desc_phys;
-+	} hw_rro;
-+
- 	/* filled by driver: */
- 	struct {
- 		union {
-@@ -138,6 +149,8 @@ struct mtk_wed_device {
- 		u32 wpdma_txfree;
- 		u32 wpdma_rx_glo;
- 		u32 wpdma_rx;
-+		u32 wpdma_rx_rro[MTK_WED_RX_QUEUES];
-+		u32 wpdma_rx_pg;
- 
- 		bool wcid_512;
- 		bool hw_rro;
-@@ -152,9 +165,20 @@ struct mtk_wed_device {
- 
- 		u8 tx_tbit[MTK_WED_TX_QUEUES];
- 		u8 rx_tbit[MTK_WED_RX_QUEUES];
-+		u8 rro_rx_tbit[MTK_WED_RX_QUEUES];
-+		u8 rx_pg_tbit[MTK_WED_RX_PAGE_QUEUES];
- 		u8 txfree_tbit;
- 		u8 amsdu_max_subframes;
- 
-+		struct {
-+			u8 se_group_nums;
-+			u16 win_size;
-+			u16 particular_sid;
-+			u32 ack_sn_addr;
-+			dma_addr_t particular_se_phys;
-+			dma_addr_t addr_elem_phys[1024];
-+		} ind_cmd;
-+
- 		u32 (*init_buf)(void *ptr, dma_addr_t phys, int token_id);
- 		int (*offload_enable)(struct mtk_wed_device *wed);
- 		void (*offload_disable)(struct mtk_wed_device *wed);
-@@ -193,6 +217,14 @@ struct mtk_wed_ops {
- 	void (*irq_set_mask)(struct mtk_wed_device *dev, u32 mask);
- 	int (*setup_tc)(struct mtk_wed_device *wed, struct net_device *dev,
- 			enum tc_setup_type type, void *type_data);
-+	void (*start_hw_rro)(struct mtk_wed_device *dev, u32 irq_mask,
-+			     bool reset);
-+	void (*rro_rx_ring_setup)(struct mtk_wed_device *dev, int ring,
-+				  void __iomem *regs);
-+	void (*msdu_pg_rx_ring_setup)(struct mtk_wed_device *dev, int ring,
-+				      void __iomem *regs);
-+	int (*ind_rx_ring_setup)(struct mtk_wed_device *dev,
-+				 void __iomem *regs);
- };
- 
- extern const struct mtk_wed_ops __rcu *mtk_soc_wed_ops;
-@@ -264,6 +296,15 @@ static inline bool mtk_wed_is_amsdu_supp
- #define mtk_wed_device_dma_reset(_dev) (_dev)->ops->reset_dma(_dev)
- #define mtk_wed_device_setup_tc(_dev, _netdev, _type, _type_data) \
- 	(_dev)->ops->setup_tc(_dev, _netdev, _type, _type_data)
-+#define mtk_wed_device_start_hw_rro(_dev, _mask, _reset) \
-+	(_dev)->ops->start_hw_rro(_dev, _mask, _reset)
-+#define mtk_wed_device_rro_rx_ring_setup(_dev, _ring, _regs) \
-+	(_dev)->ops->rro_rx_ring_setup(_dev, _ring, _regs)
-+#define mtk_wed_device_msdu_pg_rx_ring_setup(_dev, _ring, _regs) \
-+	(_dev)->ops->msdu_pg_rx_ring_setup(_dev, _ring, _regs)
-+#define mtk_wed_device_ind_rx_ring_setup(_dev, _regs) \
-+	(_dev)->ops->ind_rx_ring_setup(_dev, _regs)
-+
- #else
- static inline bool mtk_wed_device_active(struct mtk_wed_device *dev)
- {
-@@ -283,6 +324,10 @@ static inline bool mtk_wed_device_active
- #define mtk_wed_device_stop(_dev) do {} while (0)
- #define mtk_wed_device_dma_reset(_dev) do {} while (0)
- #define mtk_wed_device_setup_tc(_dev, _netdev, _type, _type_data) -EOPNOTSUPP
-+#define mtk_wed_device_start_hw_rro(_dev, _mask, _reset) do {} while (0)
-+#define mtk_wed_device_rro_rx_ring_setup(_dev, _ring, _regs) -ENODEV
-+#define mtk_wed_device_msdu_pg_rx_ring_setup(_dev, _ring, _regs) -ENODEV
-+#define mtk_wed_device_ind_rx_ring_setup(_dev, _regs) -ENODEV
- #endif
- 
- #endif
diff --git a/target/linux/generic/backport-6.1/752-18-v6.7-net-ethernet-mtk_wed-debugfs-move-wed_v2-specific-re.patch b/target/linux/generic/backport-6.1/752-18-v6.7-net-ethernet-mtk_wed-debugfs-move-wed_v2-specific-re.patch
deleted file mode 100644
index 5ea43a444569..000000000000
--- a/target/linux/generic/backport-6.1/752-18-v6.7-net-ethernet-mtk_wed-debugfs-move-wed_v2-specific-re.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Mon, 18 Sep 2023 12:29:17 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: debugfs: move wed_v2 specific regs
- out of regs array
-
-Move specific WED2.0 debugfs entries out of regs array. This is a
-preliminary patch to introduce WED 3.0 debugfs info.
-
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-@@ -151,7 +151,7 @@ DEFINE_SHOW_ATTRIBUTE(wed_txinfo);
- static int
- wed_rxinfo_show(struct seq_file *s, void *data)
- {
--	static const struct reg_dump regs[] = {
-+	static const struct reg_dump regs_common[] = {
- 		DUMP_STR("WPDMA RX"),
- 		DUMP_WPDMA_RX_RING(0),
- 		DUMP_WPDMA_RX_RING(1),
-@@ -169,7 +169,7 @@ wed_rxinfo_show(struct seq_file *s, void
- 		DUMP_WED_RING(WED_RING_RX_DATA(0)),
- 		DUMP_WED_RING(WED_RING_RX_DATA(1)),
- 
--		DUMP_STR("WED RRO"),
-+		DUMP_STR("WED WO RRO"),
- 		DUMP_WED_RRO_RING(WED_RROQM_MIOD_CTRL0),
- 		DUMP_WED(WED_RROQM_MID_MIB),
- 		DUMP_WED(WED_RROQM_MOD_MIB),
-@@ -180,17 +180,6 @@ wed_rxinfo_show(struct seq_file *s, void
- 		DUMP_WED(WED_RROQM_FDBK_ANC_MIB),
- 		DUMP_WED(WED_RROQM_FDBK_ANC2H_MIB),
- 
--		DUMP_STR("WED Route QM"),
--		DUMP_WED(WED_RTQM_R2H_MIB(0)),
--		DUMP_WED(WED_RTQM_R2Q_MIB(0)),
--		DUMP_WED(WED_RTQM_Q2H_MIB(0)),
--		DUMP_WED(WED_RTQM_R2H_MIB(1)),
--		DUMP_WED(WED_RTQM_R2Q_MIB(1)),
--		DUMP_WED(WED_RTQM_Q2H_MIB(1)),
--		DUMP_WED(WED_RTQM_Q2N_MIB),
--		DUMP_WED(WED_RTQM_Q2B_MIB),
--		DUMP_WED(WED_RTQM_PFDBK_MIB),
--
- 		DUMP_STR("WED WDMA TX"),
- 		DUMP_WED(WED_WDMA_TX_MIB),
- 		DUMP_WED_RING(WED_WDMA_RING_TX),
-@@ -211,11 +200,25 @@ wed_rxinfo_show(struct seq_file *s, void
- 		DUMP_WED(WED_RX_BM_INTF),
- 		DUMP_WED(WED_RX_BM_ERR_STS),
- 	};
-+	static const struct reg_dump regs_wed_v2[] = {
-+		DUMP_STR("WED Route QM"),
-+		DUMP_WED(WED_RTQM_R2H_MIB(0)),
-+		DUMP_WED(WED_RTQM_R2Q_MIB(0)),
-+		DUMP_WED(WED_RTQM_Q2H_MIB(0)),
-+		DUMP_WED(WED_RTQM_R2H_MIB(1)),
-+		DUMP_WED(WED_RTQM_R2Q_MIB(1)),
-+		DUMP_WED(WED_RTQM_Q2H_MIB(1)),
-+		DUMP_WED(WED_RTQM_Q2N_MIB),
-+		DUMP_WED(WED_RTQM_Q2B_MIB),
-+		DUMP_WED(WED_RTQM_PFDBK_MIB),
-+	};
- 	struct mtk_wed_hw *hw = s->private;
- 	struct mtk_wed_device *dev = hw->wed_dev;
- 
--	if (dev)
--		dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
-+	if (dev) {
-+		dump_wed_regs(s, dev, regs_common, ARRAY_SIZE(regs_common));
-+		dump_wed_regs(s, dev, regs_wed_v2, ARRAY_SIZE(regs_wed_v2));
-+	}
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-6.1/752-19-v6.7-net-ethernet-mtk_wed-debugfs-add-WED-3.0-debugfs-ent.patch b/target/linux/generic/backport-6.1/752-19-v6.7-net-ethernet-mtk_wed-debugfs-add-WED-3.0-debugfs-ent.patch
deleted file mode 100644
index f491d2fd80cf..000000000000
--- a/target/linux/generic/backport-6.1/752-19-v6.7-net-ethernet-mtk_wed-debugfs-add-WED-3.0-debugfs-ent.patch
+++ /dev/null
@@ -1,432 +0,0 @@
-From: Sujuan Chen <sujuan.chen@mediatek.com>
-Date: Mon, 18 Sep 2023 12:29:18 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: debugfs: add WED 3.0 debugfs entries
-
-Introduce WED3.0 debugfs entries useful for debugging.
-
-Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_debugfs.c
-@@ -11,6 +11,7 @@ struct reg_dump {
- 	u16 offset;
- 	u8 type;
- 	u8 base;
-+	u32 mask;
- };
- 
- enum {
-@@ -25,6 +26,8 @@ enum {
- 
- #define DUMP_STR(_str) { _str, 0, DUMP_TYPE_STRING }
- #define DUMP_REG(_reg, ...) { #_reg, MTK_##_reg, __VA_ARGS__ }
-+#define DUMP_REG_MASK(_reg, _mask)	\
-+	{ #_mask, MTK_##_reg, DUMP_TYPE_WED, 0, MTK_##_mask }
- #define DUMP_RING(_prefix, _base, ...)				\
- 	{ _prefix " BASE", _base, __VA_ARGS__ },		\
- 	{ _prefix " CNT",  _base + 0x4, __VA_ARGS__ },	\
-@@ -32,6 +35,7 @@ enum {
- 	{ _prefix " DIDX", _base + 0xc, __VA_ARGS__ }
- 
- #define DUMP_WED(_reg) DUMP_REG(_reg, DUMP_TYPE_WED)
-+#define DUMP_WED_MASK(_reg, _mask) DUMP_REG_MASK(_reg, _mask)
- #define DUMP_WED_RING(_base) DUMP_RING(#_base, MTK_##_base, DUMP_TYPE_WED)
- 
- #define DUMP_WDMA(_reg) DUMP_REG(_reg, DUMP_TYPE_WDMA)
-@@ -212,12 +216,58 @@ wed_rxinfo_show(struct seq_file *s, void
- 		DUMP_WED(WED_RTQM_Q2B_MIB),
- 		DUMP_WED(WED_RTQM_PFDBK_MIB),
- 	};
-+	static const struct reg_dump regs_wed_v3[] = {
-+		DUMP_STR("WED RX RRO DATA"),
-+		DUMP_WED_RING(WED_RRO_RX_D_RX(0)),
-+		DUMP_WED_RING(WED_RRO_RX_D_RX(1)),
-+
-+		DUMP_STR("WED RX MSDU PAGE"),
-+		DUMP_WED_RING(WED_RRO_MSDU_PG_CTRL0(0)),
-+		DUMP_WED_RING(WED_RRO_MSDU_PG_CTRL0(1)),
-+		DUMP_WED_RING(WED_RRO_MSDU_PG_CTRL0(2)),
-+
-+		DUMP_STR("WED RX IND CMD"),
-+		DUMP_WED(WED_IND_CMD_RX_CTRL1),
-+		DUMP_WED_MASK(WED_IND_CMD_RX_CTRL2, WED_IND_CMD_MAX_CNT),
-+		DUMP_WED_MASK(WED_IND_CMD_RX_CTRL0, WED_IND_CMD_PROC_IDX),
-+		DUMP_WED_MASK(RRO_IND_CMD_SIGNATURE, RRO_IND_CMD_DMA_IDX),
-+		DUMP_WED_MASK(WED_IND_CMD_RX_CTRL0, WED_IND_CMD_MAGIC_CNT),
-+		DUMP_WED_MASK(RRO_IND_CMD_SIGNATURE, RRO_IND_CMD_MAGIC_CNT),
-+		DUMP_WED_MASK(WED_IND_CMD_RX_CTRL0,
-+			      WED_IND_CMD_PREFETCH_FREE_CNT),
-+		DUMP_WED_MASK(WED_RRO_CFG1, WED_RRO_CFG1_PARTICL_SE_ID),
-+
-+		DUMP_STR("WED ADDR ELEM"),
-+		DUMP_WED(WED_ADDR_ELEM_CFG0),
-+		DUMP_WED_MASK(WED_ADDR_ELEM_CFG1,
-+			      WED_ADDR_ELEM_PREFETCH_FREE_CNT),
-+
-+		DUMP_STR("WED Route QM"),
-+		DUMP_WED(WED_RTQM_ENQ_I2Q_DMAD_CNT),
-+		DUMP_WED(WED_RTQM_ENQ_I2N_DMAD_CNT),
-+		DUMP_WED(WED_RTQM_ENQ_I2Q_PKT_CNT),
-+		DUMP_WED(WED_RTQM_ENQ_I2N_PKT_CNT),
-+		DUMP_WED(WED_RTQM_ENQ_USED_ENTRY_CNT),
-+		DUMP_WED(WED_RTQM_ENQ_ERR_CNT),
-+
-+		DUMP_WED(WED_RTQM_DEQ_DMAD_CNT),
-+		DUMP_WED(WED_RTQM_DEQ_Q2I_DMAD_CNT),
-+		DUMP_WED(WED_RTQM_DEQ_PKT_CNT),
-+		DUMP_WED(WED_RTQM_DEQ_Q2I_PKT_CNT),
-+		DUMP_WED(WED_RTQM_DEQ_USED_PFDBK_CNT),
-+		DUMP_WED(WED_RTQM_DEQ_ERR_CNT),
-+	};
- 	struct mtk_wed_hw *hw = s->private;
- 	struct mtk_wed_device *dev = hw->wed_dev;
- 
- 	if (dev) {
- 		dump_wed_regs(s, dev, regs_common, ARRAY_SIZE(regs_common));
--		dump_wed_regs(s, dev, regs_wed_v2, ARRAY_SIZE(regs_wed_v2));
-+		if (mtk_wed_is_v2(hw))
-+			dump_wed_regs(s, dev,
-+				      regs_wed_v2, ARRAY_SIZE(regs_wed_v2));
-+		else
-+			dump_wed_regs(s, dev,
-+				      regs_wed_v3, ARRAY_SIZE(regs_wed_v3));
- 	}
- 
- 	return 0;
-@@ -225,6 +275,314 @@ wed_rxinfo_show(struct seq_file *s, void
- DEFINE_SHOW_ATTRIBUTE(wed_rxinfo);
- 
- static int
-+wed_amsdu_show(struct seq_file *s, void *data)
-+{
-+	static const struct reg_dump regs[] = {
-+		DUMP_STR("WED AMDSU INFO"),
-+		DUMP_WED(WED_MON_AMSDU_FIFO_DMAD),
-+
-+		DUMP_STR("WED AMDSU ENG0 INFO"),
-+		DUMP_WED(WED_MON_AMSDU_ENG_DMAD(0)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QFPL(0)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENI(0)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENO(0)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_MERG(0)),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(0),
-+			      WED_AMSDU_ENG_MAX_PL_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(0),
-+			      WED_AMSDU_ENG_MAX_QGPP_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(0),
-+			      WED_AMSDU_ENG_CUR_ENTRY),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(0),
-+			      WED_AMSDU_ENG_MAX_BUF_MERGED),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(0),
-+			      WED_AMSDU_ENG_MAX_MSDU_MERGED),
-+
-+		DUMP_STR("WED AMDSU ENG1 INFO"),
-+		DUMP_WED(WED_MON_AMSDU_ENG_DMAD(1)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QFPL(1)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENI(1)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENO(1)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_MERG(1)),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(1),
-+			      WED_AMSDU_ENG_MAX_PL_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(1),
-+			      WED_AMSDU_ENG_MAX_QGPP_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(1),
-+			      WED_AMSDU_ENG_CUR_ENTRY),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(2),
-+			      WED_AMSDU_ENG_MAX_BUF_MERGED),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(2),
-+			      WED_AMSDU_ENG_MAX_MSDU_MERGED),
-+
-+		DUMP_STR("WED AMDSU ENG2 INFO"),
-+		DUMP_WED(WED_MON_AMSDU_ENG_DMAD(2)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QFPL(2)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENI(2)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENO(2)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_MERG(2)),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(2),
-+			      WED_AMSDU_ENG_MAX_PL_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(2),
-+			      WED_AMSDU_ENG_MAX_QGPP_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(2),
-+			      WED_AMSDU_ENG_CUR_ENTRY),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(2),
-+			      WED_AMSDU_ENG_MAX_BUF_MERGED),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(2),
-+			      WED_AMSDU_ENG_MAX_MSDU_MERGED),
-+
-+		DUMP_STR("WED AMDSU ENG3 INFO"),
-+		DUMP_WED(WED_MON_AMSDU_ENG_DMAD(3)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QFPL(3)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENI(3)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENO(3)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_MERG(3)),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(3),
-+			      WED_AMSDU_ENG_MAX_PL_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(3),
-+			      WED_AMSDU_ENG_MAX_QGPP_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(3),
-+			      WED_AMSDU_ENG_CUR_ENTRY),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(3),
-+			      WED_AMSDU_ENG_MAX_BUF_MERGED),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(3),
-+			      WED_AMSDU_ENG_MAX_MSDU_MERGED),
-+
-+		DUMP_STR("WED AMDSU ENG4 INFO"),
-+		DUMP_WED(WED_MON_AMSDU_ENG_DMAD(4)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QFPL(4)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENI(4)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENO(4)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_MERG(4)),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(4),
-+			      WED_AMSDU_ENG_MAX_PL_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(4),
-+			      WED_AMSDU_ENG_MAX_QGPP_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(4),
-+			      WED_AMSDU_ENG_CUR_ENTRY),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(4),
-+			      WED_AMSDU_ENG_MAX_BUF_MERGED),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(4),
-+			      WED_AMSDU_ENG_MAX_MSDU_MERGED),
-+
-+		DUMP_STR("WED AMDSU ENG5 INFO"),
-+		DUMP_WED(WED_MON_AMSDU_ENG_DMAD(5)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QFPL(5)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENI(5)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENO(5)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_MERG(5)),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(5),
-+			      WED_AMSDU_ENG_MAX_PL_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(5),
-+			      WED_AMSDU_ENG_MAX_QGPP_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(5),
-+			      WED_AMSDU_ENG_CUR_ENTRY),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(5),
-+			      WED_AMSDU_ENG_MAX_BUF_MERGED),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(5),
-+			      WED_AMSDU_ENG_MAX_MSDU_MERGED),
-+
-+		DUMP_STR("WED AMDSU ENG6 INFO"),
-+		DUMP_WED(WED_MON_AMSDU_ENG_DMAD(6)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QFPL(6)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENI(6)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENO(6)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_MERG(6)),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(6),
-+			      WED_AMSDU_ENG_MAX_PL_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(6),
-+			      WED_AMSDU_ENG_MAX_QGPP_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(6),
-+			      WED_AMSDU_ENG_CUR_ENTRY),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(6),
-+			      WED_AMSDU_ENG_MAX_BUF_MERGED),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(6),
-+			      WED_AMSDU_ENG_MAX_MSDU_MERGED),
-+
-+		DUMP_STR("WED AMDSU ENG7 INFO"),
-+		DUMP_WED(WED_MON_AMSDU_ENG_DMAD(7)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QFPL(7)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENI(7)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENO(7)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_MERG(7)),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(7),
-+			      WED_AMSDU_ENG_MAX_PL_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(7),
-+			      WED_AMSDU_ENG_MAX_QGPP_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(7),
-+			      WED_AMSDU_ENG_CUR_ENTRY),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(7),
-+			      WED_AMSDU_ENG_MAX_BUF_MERGED),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(4),
-+			      WED_AMSDU_ENG_MAX_MSDU_MERGED),
-+
-+		DUMP_STR("WED AMDSU ENG8 INFO"),
-+		DUMP_WED(WED_MON_AMSDU_ENG_DMAD(8)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QFPL(8)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENI(8)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_QENO(8)),
-+		DUMP_WED(WED_MON_AMSDU_ENG_MERG(8)),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(8),
-+			      WED_AMSDU_ENG_MAX_PL_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT8(8),
-+			      WED_AMSDU_ENG_MAX_QGPP_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(8),
-+			      WED_AMSDU_ENG_CUR_ENTRY),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(8),
-+			      WED_AMSDU_ENG_MAX_BUF_MERGED),
-+		DUMP_WED_MASK(WED_MON_AMSDU_ENG_CNT9(8),
-+			      WED_AMSDU_ENG_MAX_MSDU_MERGED),
-+
-+		DUMP_STR("WED QMEM INFO"),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(0), WED_AMSDU_QMEM_FQ_CNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(0), WED_AMSDU_QMEM_SP_QCNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(1), WED_AMSDU_QMEM_TID0_QCNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(1), WED_AMSDU_QMEM_TID1_QCNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(2), WED_AMSDU_QMEM_TID2_QCNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(2), WED_AMSDU_QMEM_TID3_QCNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(3), WED_AMSDU_QMEM_TID4_QCNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(3), WED_AMSDU_QMEM_TID5_QCNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(4), WED_AMSDU_QMEM_TID6_QCNT),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_CNT(4), WED_AMSDU_QMEM_TID7_QCNT),
-+
-+		DUMP_STR("WED QMEM HEAD INFO"),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(0), WED_AMSDU_QMEM_FQ_HEAD),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(0), WED_AMSDU_QMEM_SP_QHEAD),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(1), WED_AMSDU_QMEM_TID0_QHEAD),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(1), WED_AMSDU_QMEM_TID1_QHEAD),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(2), WED_AMSDU_QMEM_TID2_QHEAD),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(2), WED_AMSDU_QMEM_TID3_QHEAD),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(3), WED_AMSDU_QMEM_TID4_QHEAD),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(3), WED_AMSDU_QMEM_TID5_QHEAD),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(4), WED_AMSDU_QMEM_TID6_QHEAD),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(4), WED_AMSDU_QMEM_TID7_QHEAD),
-+
-+		DUMP_STR("WED QMEM TAIL INFO"),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(5), WED_AMSDU_QMEM_FQ_TAIL),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(5), WED_AMSDU_QMEM_SP_QTAIL),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(6), WED_AMSDU_QMEM_TID0_QTAIL),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(6), WED_AMSDU_QMEM_TID1_QTAIL),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(7), WED_AMSDU_QMEM_TID2_QTAIL),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(7), WED_AMSDU_QMEM_TID3_QTAIL),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(8), WED_AMSDU_QMEM_TID4_QTAIL),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(8), WED_AMSDU_QMEM_TID5_QTAIL),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(9), WED_AMSDU_QMEM_TID6_QTAIL),
-+		DUMP_WED_MASK(WED_MON_AMSDU_QMEM_PTR(9), WED_AMSDU_QMEM_TID7_QTAIL),
-+
-+		DUMP_STR("WED HIFTXD MSDU INFO"),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(1)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(2)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(3)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(4)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(5)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(6)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(7)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(8)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(9)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(10)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(11)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(12)),
-+		DUMP_WED(WED_MON_AMSDU_HIFTXD_FETCH_MSDU(13)),
-+	};
-+	struct mtk_wed_hw *hw = s->private;
-+	struct mtk_wed_device *dev = hw->wed_dev;
-+
-+	if (dev)
-+		dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
-+
-+	return 0;
-+}
-+DEFINE_SHOW_ATTRIBUTE(wed_amsdu);
-+
-+static int
-+wed_rtqm_show(struct seq_file *s, void *data)
-+{
-+	static const struct reg_dump regs[] = {
-+		DUMP_STR("WED Route QM IGRS0(N2H + Recycle)"),
-+		DUMP_WED(WED_RTQM_IGRS0_I2HW_DMAD_CNT),
-+		DUMP_WED(WED_RTQM_IGRS0_I2H_DMAD_CNT(0)),
-+		DUMP_WED(WED_RTQM_IGRS0_I2H_DMAD_CNT(1)),
-+		DUMP_WED(WED_RTQM_IGRS0_I2HW_PKT_CNT),
-+		DUMP_WED(WED_RTQM_IGRS0_I2H_PKT_CNT(0)),
-+		DUMP_WED(WED_RTQM_IGRS0_I2H_PKT_CNT(0)),
-+		DUMP_WED(WED_RTQM_IGRS0_FDROP_CNT),
-+
-+		DUMP_STR("WED Route QM IGRS1(Legacy)"),
-+		DUMP_WED(WED_RTQM_IGRS1_I2HW_DMAD_CNT),
-+		DUMP_WED(WED_RTQM_IGRS1_I2H_DMAD_CNT(0)),
-+		DUMP_WED(WED_RTQM_IGRS1_I2H_DMAD_CNT(1)),
-+		DUMP_WED(WED_RTQM_IGRS1_I2HW_PKT_CNT),
-+		DUMP_WED(WED_RTQM_IGRS1_I2H_PKT_CNT(0)),
-+		DUMP_WED(WED_RTQM_IGRS1_I2H_PKT_CNT(1)),
-+		DUMP_WED(WED_RTQM_IGRS1_FDROP_CNT),
-+
-+		DUMP_STR("WED Route QM IGRS2(RRO3.0)"),
-+		DUMP_WED(WED_RTQM_IGRS2_I2HW_DMAD_CNT),
-+		DUMP_WED(WED_RTQM_IGRS2_I2H_DMAD_CNT(0)),
-+		DUMP_WED(WED_RTQM_IGRS2_I2H_DMAD_CNT(1)),
-+		DUMP_WED(WED_RTQM_IGRS2_I2HW_PKT_CNT),
-+		DUMP_WED(WED_RTQM_IGRS2_I2H_PKT_CNT(0)),
-+		DUMP_WED(WED_RTQM_IGRS2_I2H_PKT_CNT(1)),
-+		DUMP_WED(WED_RTQM_IGRS2_FDROP_CNT),
-+
-+		DUMP_STR("WED Route QM IGRS3(DEBUG)"),
-+		DUMP_WED(WED_RTQM_IGRS2_I2HW_DMAD_CNT),
-+		DUMP_WED(WED_RTQM_IGRS3_I2H_DMAD_CNT(0)),
-+		DUMP_WED(WED_RTQM_IGRS3_I2H_DMAD_CNT(1)),
-+		DUMP_WED(WED_RTQM_IGRS3_I2HW_PKT_CNT),
-+		DUMP_WED(WED_RTQM_IGRS3_I2H_PKT_CNT(0)),
-+		DUMP_WED(WED_RTQM_IGRS3_I2H_PKT_CNT(1)),
-+		DUMP_WED(WED_RTQM_IGRS3_FDROP_CNT),
-+	};
-+	struct mtk_wed_hw *hw = s->private;
-+	struct mtk_wed_device *dev = hw->wed_dev;
-+
-+	if (dev)
-+		dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
-+
-+	return 0;
-+}
-+DEFINE_SHOW_ATTRIBUTE(wed_rtqm);
-+
-+static int
-+wed_rro_show(struct seq_file *s, void *data)
-+{
-+	static const struct reg_dump regs[] = {
-+		DUMP_STR("RRO/IND CMD CNT"),
-+		DUMP_WED(WED_RX_IND_CMD_CNT(1)),
-+		DUMP_WED(WED_RX_IND_CMD_CNT(2)),
-+		DUMP_WED(WED_RX_IND_CMD_CNT(3)),
-+		DUMP_WED(WED_RX_IND_CMD_CNT(4)),
-+		DUMP_WED(WED_RX_IND_CMD_CNT(5)),
-+		DUMP_WED(WED_RX_IND_CMD_CNT(6)),
-+		DUMP_WED(WED_RX_IND_CMD_CNT(7)),
-+		DUMP_WED(WED_RX_IND_CMD_CNT(8)),
-+		DUMP_WED_MASK(WED_RX_IND_CMD_CNT(9),
-+			      WED_IND_CMD_MAGIC_CNT_FAIL_CNT),
-+
-+		DUMP_WED(WED_RX_ADDR_ELEM_CNT(0)),
-+		DUMP_WED_MASK(WED_RX_ADDR_ELEM_CNT(1),
-+			      WED_ADDR_ELEM_SIG_FAIL_CNT),
-+		DUMP_WED(WED_RX_MSDU_PG_CNT(1)),
-+		DUMP_WED(WED_RX_MSDU_PG_CNT(2)),
-+		DUMP_WED(WED_RX_MSDU_PG_CNT(3)),
-+		DUMP_WED(WED_RX_MSDU_PG_CNT(4)),
-+		DUMP_WED(WED_RX_MSDU_PG_CNT(5)),
-+		DUMP_WED_MASK(WED_RX_PN_CHK_CNT,
-+			      WED_PN_CHK_FAIL_CNT),
-+	};
-+	struct mtk_wed_hw *hw = s->private;
-+	struct mtk_wed_device *dev = hw->wed_dev;
-+
-+	if (dev)
-+		dump_wed_regs(s, dev, regs, ARRAY_SIZE(regs));
-+
-+	return 0;
-+}
-+DEFINE_SHOW_ATTRIBUTE(wed_rro);
-+
-+static int
- mtk_wed_reg_set(void *data, u64 val)
- {
- 	struct mtk_wed_hw *hw = data;
-@@ -266,7 +624,16 @@ void mtk_wed_hw_add_debugfs(struct mtk_w
- 	debugfs_create_u32("regidx", 0600, dir, &hw->debugfs_reg);
- 	debugfs_create_file_unsafe("regval", 0600, dir, hw, &fops_regval);
- 	debugfs_create_file_unsafe("txinfo", 0400, dir, hw, &wed_txinfo_fops);
--	if (!mtk_wed_is_v1(hw))
-+	if (!mtk_wed_is_v1(hw)) {
- 		debugfs_create_file_unsafe("rxinfo", 0400, dir, hw,
- 					   &wed_rxinfo_fops);
-+		if (mtk_wed_is_v3_or_greater(hw)) {
-+			debugfs_create_file_unsafe("amsdu", 0400, dir, hw,
-+						   &wed_amsdu_fops);
-+			debugfs_create_file_unsafe("rtqm", 0400, dir, hw,
-+						   &wed_rtqm_fops);
-+			debugfs_create_file_unsafe("rro", 0400, dir, hw,
-+						   &wed_rro_fops);
-+		}
-+	}
- }
diff --git a/target/linux/generic/backport-6.1/752-20-v6.7-net-ethernet-mtk_wed-add-wed-3.0-reset-support.patch b/target/linux/generic/backport-6.1/752-20-v6.7-net-ethernet-mtk_wed-add-wed-3.0-reset-support.patch
deleted file mode 100644
index aaaabf05e8b2..000000000000
--- a/target/linux/generic/backport-6.1/752-20-v6.7-net-ethernet-mtk_wed-add-wed-3.0-reset-support.patch
+++ /dev/null
@@ -1,587 +0,0 @@
-From: Sujuan Chen <sujuan.chen@mediatek.com>
-Date: Mon, 18 Sep 2023 12:29:19 +0200
-Subject: [PATCH] net: ethernet: mtk_wed: add wed 3.0 reset support
-
-Introduce support for resetting Wireless Ethernet Dispatcher 3.0
-available on MT988 SoC.
-
-Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_wed.c
-+++ b/drivers/net/ethernet/mediatek/mtk_wed.c
-@@ -148,6 +148,90 @@ mtk_wdma_read_reset(struct mtk_wed_devic
- 	return wdma_r32(dev, MTK_WDMA_GLO_CFG);
- }
- 
-+static void
-+mtk_wdma_v3_rx_reset(struct mtk_wed_device *dev)
-+{
-+	u32 status;
-+
-+	if (!mtk_wed_is_v3_or_greater(dev->hw))
-+		return;
-+
-+	wdma_clr(dev, MTK_WDMA_PREF_TX_CFG, MTK_WDMA_PREF_TX_CFG_PREF_EN);
-+	wdma_clr(dev, MTK_WDMA_PREF_RX_CFG, MTK_WDMA_PREF_RX_CFG_PREF_EN);
-+
-+	if (read_poll_timeout(wdma_r32, status,
-+			      !(status & MTK_WDMA_PREF_TX_CFG_PREF_BUSY),
-+			      0, 10000, false, dev, MTK_WDMA_PREF_TX_CFG))
-+		dev_err(dev->hw->dev, "rx reset failed\n");
-+
-+	if (read_poll_timeout(wdma_r32, status,
-+			      !(status & MTK_WDMA_PREF_RX_CFG_PREF_BUSY),
-+			      0, 10000, false, dev, MTK_WDMA_PREF_RX_CFG))
-+		dev_err(dev->hw->dev, "rx reset failed\n");
-+
-+	wdma_clr(dev, MTK_WDMA_WRBK_TX_CFG, MTK_WDMA_WRBK_TX_CFG_WRBK_EN);
-+	wdma_clr(dev, MTK_WDMA_WRBK_RX_CFG, MTK_WDMA_WRBK_RX_CFG_WRBK_EN);
-+
-+	if (read_poll_timeout(wdma_r32, status,
-+			      !(status & MTK_WDMA_WRBK_TX_CFG_WRBK_BUSY),
-+			      0, 10000, false, dev, MTK_WDMA_WRBK_TX_CFG))
-+		dev_err(dev->hw->dev, "rx reset failed\n");
-+
-+	if (read_poll_timeout(wdma_r32, status,
-+			      !(status & MTK_WDMA_WRBK_RX_CFG_WRBK_BUSY),
-+			      0, 10000, false, dev, MTK_WDMA_WRBK_RX_CFG))
-+		dev_err(dev->hw->dev, "rx reset failed\n");
-+
-+	/* prefetch FIFO */
-+	wdma_w32(dev, MTK_WDMA_PREF_RX_FIFO_CFG,
-+		 MTK_WDMA_PREF_RX_FIFO_CFG_RING0_CLEAR |
-+		 MTK_WDMA_PREF_RX_FIFO_CFG_RING1_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_PREF_RX_FIFO_CFG,
-+		 MTK_WDMA_PREF_RX_FIFO_CFG_RING0_CLEAR |
-+		 MTK_WDMA_PREF_RX_FIFO_CFG_RING1_CLEAR);
-+
-+	/* core FIFO */
-+	wdma_w32(dev, MTK_WDMA_XDMA_RX_FIFO_CFG,
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_PAR_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_CMD_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_DMAD_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_ARR_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_LEN_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_WID_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_BID_FIFO_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_XDMA_RX_FIFO_CFG,
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_PAR_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_CMD_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_DMAD_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_ARR_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_LEN_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_WID_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_RX_FIFO_CFG_RX_BID_FIFO_CLEAR);
-+
-+	/* writeback FIFO */
-+	wdma_w32(dev, MTK_WDMA_WRBK_RX_FIFO_CFG(0),
-+		 MTK_WDMA_WRBK_RX_FIFO_CFG_RING_CLEAR);
-+	wdma_w32(dev, MTK_WDMA_WRBK_RX_FIFO_CFG(1),
-+		 MTK_WDMA_WRBK_RX_FIFO_CFG_RING_CLEAR);
-+
-+	wdma_clr(dev, MTK_WDMA_WRBK_RX_FIFO_CFG(0),
-+		 MTK_WDMA_WRBK_RX_FIFO_CFG_RING_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_WRBK_RX_FIFO_CFG(1),
-+		 MTK_WDMA_WRBK_RX_FIFO_CFG_RING_CLEAR);
-+
-+	/* prefetch ring status */
-+	wdma_w32(dev, MTK_WDMA_PREF_SIDX_CFG,
-+		 MTK_WDMA_PREF_SIDX_CFG_RX_RING_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_PREF_SIDX_CFG,
-+		 MTK_WDMA_PREF_SIDX_CFG_RX_RING_CLEAR);
-+
-+	/* writeback ring status */
-+	wdma_w32(dev, MTK_WDMA_WRBK_SIDX_CFG,
-+		 MTK_WDMA_WRBK_SIDX_CFG_RX_RING_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_WRBK_SIDX_CFG,
-+		 MTK_WDMA_WRBK_SIDX_CFG_RX_RING_CLEAR);
-+}
-+
- static int
- mtk_wdma_rx_reset(struct mtk_wed_device *dev)
- {
-@@ -160,6 +244,7 @@ mtk_wdma_rx_reset(struct mtk_wed_device
- 	if (ret)
- 		dev_err(dev->hw->dev, "rx reset failed\n");
- 
-+	mtk_wdma_v3_rx_reset(dev);
- 	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_RX);
- 	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
- 
-@@ -192,6 +277,84 @@ mtk_wed_poll_busy(struct mtk_wed_device
- }
- 
- static void
-+mtk_wdma_v3_tx_reset(struct mtk_wed_device *dev)
-+{
-+	u32 status;
-+
-+	if (!mtk_wed_is_v3_or_greater(dev->hw))
-+		return;
-+
-+	wdma_clr(dev, MTK_WDMA_PREF_TX_CFG, MTK_WDMA_PREF_TX_CFG_PREF_EN);
-+	wdma_clr(dev, MTK_WDMA_PREF_RX_CFG, MTK_WDMA_PREF_RX_CFG_PREF_EN);
-+
-+	if (read_poll_timeout(wdma_r32, status,
-+			      !(status & MTK_WDMA_PREF_TX_CFG_PREF_BUSY),
-+			      0, 10000, false, dev, MTK_WDMA_PREF_TX_CFG))
-+		dev_err(dev->hw->dev, "tx reset failed\n");
-+
-+	if (read_poll_timeout(wdma_r32, status,
-+			      !(status & MTK_WDMA_PREF_RX_CFG_PREF_BUSY),
-+			      0, 10000, false, dev, MTK_WDMA_PREF_RX_CFG))
-+		dev_err(dev->hw->dev, "tx reset failed\n");
-+
-+	wdma_clr(dev, MTK_WDMA_WRBK_TX_CFG, MTK_WDMA_WRBK_TX_CFG_WRBK_EN);
-+	wdma_clr(dev, MTK_WDMA_WRBK_RX_CFG, MTK_WDMA_WRBK_RX_CFG_WRBK_EN);
-+
-+	if (read_poll_timeout(wdma_r32, status,
-+			      !(status & MTK_WDMA_WRBK_TX_CFG_WRBK_BUSY),
-+			      0, 10000, false, dev, MTK_WDMA_WRBK_TX_CFG))
-+		dev_err(dev->hw->dev, "tx reset failed\n");
-+
-+	if (read_poll_timeout(wdma_r32, status,
-+			      !(status & MTK_WDMA_WRBK_RX_CFG_WRBK_BUSY),
-+			      0, 10000, false, dev, MTK_WDMA_WRBK_RX_CFG))
-+		dev_err(dev->hw->dev, "tx reset failed\n");
-+
-+	/* prefetch FIFO */
-+	wdma_w32(dev, MTK_WDMA_PREF_TX_FIFO_CFG,
-+		 MTK_WDMA_PREF_TX_FIFO_CFG_RING0_CLEAR |
-+		 MTK_WDMA_PREF_TX_FIFO_CFG_RING1_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_PREF_TX_FIFO_CFG,
-+		 MTK_WDMA_PREF_TX_FIFO_CFG_RING0_CLEAR |
-+		 MTK_WDMA_PREF_TX_FIFO_CFG_RING1_CLEAR);
-+
-+	/* core FIFO */
-+	wdma_w32(dev, MTK_WDMA_XDMA_TX_FIFO_CFG,
-+		 MTK_WDMA_XDMA_TX_FIFO_CFG_TX_PAR_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_TX_FIFO_CFG_TX_CMD_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_TX_FIFO_CFG_TX_DMAD_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_TX_FIFO_CFG_TX_ARR_FIFO_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_XDMA_TX_FIFO_CFG,
-+		 MTK_WDMA_XDMA_TX_FIFO_CFG_TX_PAR_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_TX_FIFO_CFG_TX_CMD_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_TX_FIFO_CFG_TX_DMAD_FIFO_CLEAR |
-+		 MTK_WDMA_XDMA_TX_FIFO_CFG_TX_ARR_FIFO_CLEAR);
-+
-+	/* writeback FIFO */
-+	wdma_w32(dev, MTK_WDMA_WRBK_TX_FIFO_CFG(0),
-+		 MTK_WDMA_WRBK_TX_FIFO_CFG_RING_CLEAR);
-+	wdma_w32(dev, MTK_WDMA_WRBK_TX_FIFO_CFG(1),
-+		 MTK_WDMA_WRBK_TX_FIFO_CFG_RING_CLEAR);
-+
-+	wdma_clr(dev, MTK_WDMA_WRBK_TX_FIFO_CFG(0),
-+		 MTK_WDMA_WRBK_TX_FIFO_CFG_RING_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_WRBK_TX_FIFO_CFG(1),
-+		 MTK_WDMA_WRBK_TX_FIFO_CFG_RING_CLEAR);
-+
-+	/* prefetch ring status */
-+	wdma_w32(dev, MTK_WDMA_PREF_SIDX_CFG,
-+		 MTK_WDMA_PREF_SIDX_CFG_TX_RING_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_PREF_SIDX_CFG,
-+		 MTK_WDMA_PREF_SIDX_CFG_TX_RING_CLEAR);
-+
-+	/* writeback ring status */
-+	wdma_w32(dev, MTK_WDMA_WRBK_SIDX_CFG,
-+		 MTK_WDMA_WRBK_SIDX_CFG_TX_RING_CLEAR);
-+	wdma_clr(dev, MTK_WDMA_WRBK_SIDX_CFG,
-+		 MTK_WDMA_WRBK_SIDX_CFG_TX_RING_CLEAR);
-+}
-+
-+static void
- mtk_wdma_tx_reset(struct mtk_wed_device *dev)
- {
- 	u32 status, mask = MTK_WDMA_GLO_CFG_TX_DMA_BUSY;
-@@ -202,6 +365,7 @@ mtk_wdma_tx_reset(struct mtk_wed_device
- 			       !(status & mask), 0, 10000))
- 		dev_err(dev->hw->dev, "tx reset failed\n");
- 
-+	mtk_wdma_v3_tx_reset(dev);
- 	wdma_w32(dev, MTK_WDMA_RESET_IDX, MTK_WDMA_RESET_IDX_TX);
- 	wdma_w32(dev, MTK_WDMA_RESET_IDX, 0);
- 
-@@ -1405,13 +1569,33 @@ mtk_wed_rx_reset(struct mtk_wed_device *
- 	if (ret)
- 		return ret;
- 
-+	if (dev->wlan.hw_rro) {
-+		wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_RX_IND_CMD_EN);
-+		mtk_wed_poll_busy(dev, MTK_WED_RRO_RX_HW_STS,
-+				  MTK_WED_RX_IND_CMD_BUSY);
-+		mtk_wed_reset(dev, MTK_WED_RESET_RRO_RX_TO_PG);
-+	}
-+
- 	wed_clr(dev, MTK_WED_WPDMA_RX_D_GLO_CFG, MTK_WED_WPDMA_RX_D_RX_DRV_EN);
- 	ret = mtk_wed_poll_busy(dev, MTK_WED_WPDMA_RX_D_GLO_CFG,
- 				MTK_WED_WPDMA_RX_D_RX_DRV_BUSY);
-+	if (!ret && mtk_wed_is_v3_or_greater(dev->hw))
-+		ret = mtk_wed_poll_busy(dev, MTK_WED_WPDMA_RX_D_PREF_CFG,
-+					MTK_WED_WPDMA_RX_D_PREF_BUSY);
- 	if (ret) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_INT_AGENT);
- 		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_RX_D_DRV);
- 	} else {
-+		if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+			/* 1.a. disable prefetch HW */
-+			wed_clr(dev, MTK_WED_WPDMA_RX_D_PREF_CFG,
-+				MTK_WED_WPDMA_RX_D_PREF_EN);
-+			mtk_wed_poll_busy(dev, MTK_WED_WPDMA_RX_D_PREF_CFG,
-+					  MTK_WED_WPDMA_RX_D_PREF_BUSY);
-+			wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX,
-+				MTK_WED_WPDMA_RX_D_RST_DRV_IDX_ALL);
-+		}
-+
- 		wed_w32(dev, MTK_WED_WPDMA_RX_D_RST_IDX,
- 			MTK_WED_WPDMA_RX_D_RST_CRX_IDX |
- 			MTK_WED_WPDMA_RX_D_RST_DRV_IDX);
-@@ -1439,23 +1623,52 @@ mtk_wed_rx_reset(struct mtk_wed_device *
- 		wed_w32(dev, MTK_WED_RROQM_RST_IDX, 0);
- 	}
- 
-+	if (dev->wlan.hw_rro) {
-+		/* disable rro msdu page drv */
-+		wed_clr(dev, MTK_WED_RRO_MSDU_PG_RING2_CFG,
-+			MTK_WED_RRO_MSDU_PG_DRV_EN);
-+
-+		/* disable rro data drv */
-+		wed_clr(dev, MTK_WED_RRO_RX_D_CFG(2), MTK_WED_RRO_RX_D_DRV_EN);
-+
-+		/* rro msdu page drv reset */
-+		wed_w32(dev, MTK_WED_RRO_MSDU_PG_RING2_CFG,
-+			MTK_WED_RRO_MSDU_PG_DRV_CLR);
-+		mtk_wed_poll_busy(dev, MTK_WED_RRO_MSDU_PG_RING2_CFG,
-+				  MTK_WED_RRO_MSDU_PG_DRV_CLR);
-+
-+		/* rro data drv reset */
-+		wed_w32(dev, MTK_WED_RRO_RX_D_CFG(2),
-+			MTK_WED_RRO_RX_D_DRV_CLR);
-+		mtk_wed_poll_busy(dev, MTK_WED_RRO_RX_D_CFG(2),
-+				  MTK_WED_RRO_RX_D_DRV_CLR);
-+	}
-+
- 	/* reset route qm */
- 	wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_RX_ROUTE_QM_EN);
- 	ret = mtk_wed_poll_busy(dev, MTK_WED_CTRL,
- 				MTK_WED_CTRL_RX_ROUTE_QM_BUSY);
--	if (ret)
-+	if (ret) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_RX_ROUTE_QM);
--	else
--		wed_set(dev, MTK_WED_RTQM_GLO_CFG,
--			MTK_WED_RTQM_Q_RST);
-+	} else if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+		wed_set(dev, MTK_WED_RTQM_RST, BIT(0));
-+		wed_clr(dev, MTK_WED_RTQM_RST, BIT(0));
-+		mtk_wed_reset(dev, MTK_WED_RESET_RX_ROUTE_QM);
-+	} else {
-+		wed_set(dev, MTK_WED_RTQM_GLO_CFG, MTK_WED_RTQM_Q_RST);
-+	}
- 
- 	/* reset tx wdma */
- 	mtk_wdma_tx_reset(dev);
- 
- 	/* reset tx wdma drv */
- 	wed_clr(dev, MTK_WED_WDMA_GLO_CFG, MTK_WED_WDMA_GLO_CFG_TX_DRV_EN);
--	mtk_wed_poll_busy(dev, MTK_WED_CTRL,
--			  MTK_WED_CTRL_WDMA_INT_AGENT_BUSY);
-+	if (mtk_wed_is_v3_or_greater(dev->hw))
-+		mtk_wed_poll_busy(dev, MTK_WED_WPDMA_STATUS,
-+				  MTK_WED_WPDMA_STATUS_TX_DRV);
-+	else
-+		mtk_wed_poll_busy(dev, MTK_WED_CTRL,
-+				  MTK_WED_CTRL_WDMA_INT_AGENT_BUSY);
- 	mtk_wed_reset(dev, MTK_WED_RESET_WDMA_TX_DRV);
- 
- 	/* reset wed rx dma */
-@@ -1476,6 +1689,14 @@ mtk_wed_rx_reset(struct mtk_wed_device *
- 			  MTK_WED_CTRL_WED_RX_BM_BUSY);
- 	mtk_wed_reset(dev, MTK_WED_RESET_RX_BM);
- 
-+	if (dev->wlan.hw_rro) {
-+		wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_RX_PG_BM_EN);
-+		mtk_wed_poll_busy(dev, MTK_WED_CTRL,
-+				  MTK_WED_CTRL_WED_RX_PG_BM_BUSY);
-+		wed_set(dev, MTK_WED_RESET, MTK_WED_RESET_RX_PG_BM);
-+		wed_clr(dev, MTK_WED_RESET, MTK_WED_RESET_RX_PG_BM);
-+	}
-+
- 	/* wo change to enable state */
- 	val = MTK_WED_WO_STATE_ENABLE;
- 	ret = mtk_wed_mcu_send_msg(wo, MTK_WED_MODULE_ID_WO,
-@@ -1493,6 +1714,7 @@ mtk_wed_rx_reset(struct mtk_wed_device *
- 				   false);
- 	}
- 	mtk_wed_free_rx_buffer(dev);
-+	mtk_wed_hwrro_free_buffer(dev);
- 
- 	return 0;
- }
-@@ -1526,15 +1748,41 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 
- 	/* 2. reset WDMA rx DMA */
- 	busy = !!mtk_wdma_rx_reset(dev);
--	wed_clr(dev, MTK_WED_WDMA_GLO_CFG, MTK_WED_WDMA_GLO_CFG_RX_DRV_EN);
-+	if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+		val = MTK_WED_WDMA_GLO_CFG_RX_DIS_FSM_AUTO_IDLE |
-+		      wed_r32(dev, MTK_WED_WDMA_GLO_CFG);
-+		val &= ~MTK_WED_WDMA_GLO_CFG_RX_DRV_EN;
-+		wed_w32(dev, MTK_WED_WDMA_GLO_CFG, val);
-+	} else {
-+		wed_clr(dev, MTK_WED_WDMA_GLO_CFG,
-+			MTK_WED_WDMA_GLO_CFG_RX_DRV_EN);
-+	}
-+
- 	if (!busy)
- 		busy = mtk_wed_poll_busy(dev, MTK_WED_WDMA_GLO_CFG,
- 					 MTK_WED_WDMA_GLO_CFG_RX_DRV_BUSY);
-+	if (!busy && mtk_wed_is_v3_or_greater(dev->hw))
-+		busy = mtk_wed_poll_busy(dev, MTK_WED_WDMA_RX_PREF_CFG,
-+					 MTK_WED_WDMA_RX_PREF_BUSY);
- 
- 	if (busy) {
- 		mtk_wed_reset(dev, MTK_WED_RESET_WDMA_INT_AGENT);
- 		mtk_wed_reset(dev, MTK_WED_RESET_WDMA_RX_DRV);
- 	} else {
-+		if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+			/* 1.a. disable prefetch HW */
-+			wed_clr(dev, MTK_WED_WDMA_RX_PREF_CFG,
-+				MTK_WED_WDMA_RX_PREF_EN);
-+			mtk_wed_poll_busy(dev, MTK_WED_WDMA_RX_PREF_CFG,
-+					  MTK_WED_WDMA_RX_PREF_BUSY);
-+			wed_clr(dev, MTK_WED_WDMA_RX_PREF_CFG,
-+				MTK_WED_WDMA_RX_PREF_DDONE2_EN);
-+
-+			/* 2. Reset dma index */
-+			wed_w32(dev, MTK_WED_WDMA_RESET_IDX,
-+				MTK_WED_WDMA_RESET_IDX_RX_ALL);
-+		}
-+
- 		wed_w32(dev, MTK_WED_WDMA_RESET_IDX,
- 			MTK_WED_WDMA_RESET_IDX_RX | MTK_WED_WDMA_RESET_IDX_DRV);
- 		wed_w32(dev, MTK_WED_WDMA_RESET_IDX, 0);
-@@ -1550,8 +1798,13 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 	wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_WED_TX_FREE_AGENT_EN);
- 
- 	for (i = 0; i < 100; i++) {
--		val = wed_r32(dev, MTK_WED_TX_BM_INTF);
--		if (FIELD_GET(MTK_WED_TX_BM_INTF_TKFIFO_FDEP, val) == 0x40)
-+		if (mtk_wed_is_v1(dev->hw))
-+			val = FIELD_GET(MTK_WED_TX_BM_INTF_TKFIFO_FDEP,
-+					wed_r32(dev, MTK_WED_TX_BM_INTF));
-+		else
-+			val = FIELD_GET(MTK_WED_TX_TKID_INTF_TKFIFO_FDEP,
-+					wed_r32(dev, MTK_WED_TX_TKID_INTF));
-+		if (val == 0x40)
- 			break;
- 	}
- 
-@@ -1573,6 +1826,8 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_INT_AGENT);
- 		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_TX_DRV);
- 		mtk_wed_reset(dev, MTK_WED_RESET_WPDMA_RX_DRV);
-+		if (mtk_wed_is_v3_or_greater(dev->hw))
-+			wed_w32(dev, MTK_WED_RX1_CTRL2, 0);
- 	} else {
- 		wed_w32(dev, MTK_WED_WPDMA_RESET_IDX,
- 			MTK_WED_WPDMA_RESET_IDX_TX |
-@@ -1589,7 +1844,14 @@ mtk_wed_reset_dma(struct mtk_wed_device
- 		wed_w32(dev, MTK_WED_RESET_IDX, 0);
- 	}
- 
--	mtk_wed_rx_reset(dev);
-+	if (mtk_wed_is_v3_or_greater(dev->hw)) {
-+		/* reset amsdu engine */
-+		wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_TX_AMSDU_EN);
-+		mtk_wed_reset(dev, MTK_WED_RESET_TX_AMSDU);
-+	}
-+
-+	if (mtk_wed_get_rx_capa(dev))
-+		mtk_wed_rx_reset(dev);
- }
- 
- static int
-@@ -1841,6 +2103,7 @@ mtk_wed_dma_enable(struct mtk_wed_device
- 			MTK_WED_WPDMA_GLO_CFG_RX_DRV_UNS_VER_FORCE_4);
- 
- 		wdma_set(dev, MTK_WDMA_PREF_RX_CFG, MTK_WDMA_PREF_RX_CFG_PREF_EN);
-+		wdma_set(dev, MTK_WDMA_WRBK_RX_CFG, MTK_WDMA_WRBK_RX_CFG_WRBK_EN);
- 	}
- 
- 	wed_clr(dev, MTK_WED_WPDMA_GLO_CFG,
-@@ -1904,6 +2167,12 @@ mtk_wed_start_hw_rro(struct mtk_wed_devi
- 	if (!mtk_wed_get_rx_capa(dev) || !dev->wlan.hw_rro)
- 		return;
- 
-+	if (reset) {
-+		wed_set(dev, MTK_WED_RRO_MSDU_PG_RING2_CFG,
-+			MTK_WED_RRO_MSDU_PG_DRV_EN);
-+		return;
-+	}
-+
- 	wed_set(dev, MTK_WED_RRO_RX_D_CFG(2), MTK_WED_RRO_MSDU_PG_DRV_CLR);
- 	wed_w32(dev, MTK_WED_RRO_MSDU_PG_RING2_CFG,
- 		MTK_WED_RRO_MSDU_PG_DRV_CLR);
---- a/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-+++ b/drivers/net/ethernet/mediatek/mtk_wed_regs.h
-@@ -28,6 +28,8 @@ struct mtk_wdma_desc {
- #define MTK_WED_RESET					0x008
- #define MTK_WED_RESET_TX_BM				BIT(0)
- #define MTK_WED_RESET_RX_BM				BIT(1)
-+#define MTK_WED_RESET_RX_PG_BM				BIT(2)
-+#define MTK_WED_RESET_RRO_RX_TO_PG			BIT(3)
- #define MTK_WED_RESET_TX_FREE_AGENT			BIT(4)
- #define MTK_WED_RESET_WPDMA_TX_DRV			BIT(8)
- #define MTK_WED_RESET_WPDMA_RX_DRV			BIT(9)
-@@ -106,6 +108,9 @@ struct mtk_wdma_desc {
- #define MTK_WED_STATUS					0x060
- #define MTK_WED_STATUS_TX				GENMASK(15, 8)
- 
-+#define MTK_WED_WPDMA_STATUS				0x068
-+#define MTK_WED_WPDMA_STATUS_TX_DRV			GENMASK(15, 8)
-+
- #define MTK_WED_TX_BM_CTRL				0x080
- #define MTK_WED_TX_BM_CTRL_VLD_GRP_NUM			GENMASK(6, 0)
- #define MTK_WED_TX_BM_CTRL_RSV_GRP_NUM			GENMASK(22, 16)
-@@ -140,6 +145,9 @@ struct mtk_wdma_desc {
- #define MTK_WED_TX_TKID_CTRL_RSV_GRP_NUM		GENMASK(22, 16)
- #define MTK_WED_TX_TKID_CTRL_PAUSE			BIT(28)
- 
-+#define MTK_WED_TX_TKID_INTF				0x0dc
-+#define MTK_WED_TX_TKID_INTF_TKFIFO_FDEP		GENMASK(25, 16)
-+
- #define MTK_WED_TX_TKID_CTRL_VLD_GRP_NUM_V3		GENMASK(7, 0)
- #define MTK_WED_TX_TKID_CTRL_RSV_GRP_NUM_V3		GENMASK(23, 16)
- 
-@@ -190,6 +198,7 @@ struct mtk_wdma_desc {
- #define MTK_WED_RING_RX_DATA(_n)			(0x420 + (_n) * 0x10)
- 
- #define MTK_WED_SCR0					0x3c0
-+#define MTK_WED_RX1_CTRL2				0x418
- #define MTK_WED_WPDMA_INT_TRIGGER			0x504
- #define MTK_WED_WPDMA_INT_TRIGGER_RX_DONE		BIT(1)
- #define MTK_WED_WPDMA_INT_TRIGGER_TX_DONE		GENMASK(5, 4)
-@@ -303,6 +312,7 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_WPDMA_RX_D_RST_IDX			0x760
- #define MTK_WED_WPDMA_RX_D_RST_CRX_IDX			GENMASK(17, 16)
-+#define MTK_WED_WPDMA_RX_D_RST_DRV_IDX_ALL		BIT(20)
- #define MTK_WED_WPDMA_RX_D_RST_DRV_IDX			GENMASK(25, 24)
- 
- #define MTK_WED_WPDMA_RX_GLO_CFG			0x76c
-@@ -313,6 +323,7 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_WPDMA_RX_D_PREF_CFG			0x7b4
- #define MTK_WED_WPDMA_RX_D_PREF_EN			BIT(0)
-+#define MTK_WED_WPDMA_RX_D_PREF_BUSY			BIT(1)
- #define MTK_WED_WPDMA_RX_D_PREF_BURST_SIZE		GENMASK(12, 8)
- #define MTK_WED_WPDMA_RX_D_PREF_LOW_THRES		GENMASK(21, 16)
- 
-@@ -334,11 +345,13 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_WDMA_RX_PREF_CFG			0x950
- #define MTK_WED_WDMA_RX_PREF_EN				BIT(0)
-+#define MTK_WED_WDMA_RX_PREF_BUSY			BIT(1)
- #define MTK_WED_WDMA_RX_PREF_BURST_SIZE			GENMASK(12, 8)
- #define MTK_WED_WDMA_RX_PREF_LOW_THRES			GENMASK(21, 16)
- #define MTK_WED_WDMA_RX_PREF_RX0_SIDX_CLR		BIT(24)
- #define MTK_WED_WDMA_RX_PREF_RX1_SIDX_CLR		BIT(25)
- #define MTK_WED_WDMA_RX_PREF_DDONE2_EN			BIT(26)
-+#define MTK_WED_WDMA_RX_PREF_DDONE2_BUSY		BIT(27)
- 
- #define MTK_WED_WDMA_RX_PREF_FIFO_CFG			0x95C
- #define MTK_WED_WDMA_RX_PREF_FIFO_RX0_CLR		BIT(0)
-@@ -367,6 +380,7 @@ struct mtk_wdma_desc {
- 
- #define MTK_WED_WDMA_RESET_IDX				0xa08
- #define MTK_WED_WDMA_RESET_IDX_RX			GENMASK(17, 16)
-+#define MTK_WED_WDMA_RESET_IDX_RX_ALL			BIT(20)
- #define MTK_WED_WDMA_RESET_IDX_DRV			GENMASK(25, 24)
- 
- #define MTK_WED_WDMA_INT_CLR				0xa24
-@@ -437,21 +451,62 @@ struct mtk_wdma_desc {
- #define MTK_WDMA_INT_MASK_RX_DELAY			BIT(30)
- #define MTK_WDMA_INT_MASK_RX_COHERENT			BIT(31)
- 
-+#define MTK_WDMA_XDMA_TX_FIFO_CFG			0x238
-+#define MTK_WDMA_XDMA_TX_FIFO_CFG_TX_PAR_FIFO_CLEAR	BIT(0)
-+#define MTK_WDMA_XDMA_TX_FIFO_CFG_TX_CMD_FIFO_CLEAR	BIT(4)
-+#define MTK_WDMA_XDMA_TX_FIFO_CFG_TX_DMAD_FIFO_CLEAR	BIT(8)
-+#define MTK_WDMA_XDMA_TX_FIFO_CFG_TX_ARR_FIFO_CLEAR	BIT(12)
-+
-+#define MTK_WDMA_XDMA_RX_FIFO_CFG			0x23c
-+#define MTK_WDMA_XDMA_RX_FIFO_CFG_RX_PAR_FIFO_CLEAR	BIT(0)
-+#define MTK_WDMA_XDMA_RX_FIFO_CFG_RX_CMD_FIFO_CLEAR	BIT(4)
-+#define MTK_WDMA_XDMA_RX_FIFO_CFG_RX_DMAD_FIFO_CLEAR	BIT(8)
-+#define MTK_WDMA_XDMA_RX_FIFO_CFG_RX_ARR_FIFO_CLEAR	BIT(12)
-+#define MTK_WDMA_XDMA_RX_FIFO_CFG_RX_LEN_FIFO_CLEAR	BIT(15)
-+#define MTK_WDMA_XDMA_RX_FIFO_CFG_RX_WID_FIFO_CLEAR	BIT(18)
-+#define MTK_WDMA_XDMA_RX_FIFO_CFG_RX_BID_FIFO_CLEAR	BIT(21)
-+
- #define MTK_WDMA_INT_GRP1				0x250
- #define MTK_WDMA_INT_GRP2				0x254
- 
- #define MTK_WDMA_PREF_TX_CFG				0x2d0
- #define MTK_WDMA_PREF_TX_CFG_PREF_EN			BIT(0)
-+#define MTK_WDMA_PREF_TX_CFG_PREF_BUSY			BIT(1)
- 
- #define MTK_WDMA_PREF_RX_CFG				0x2dc
- #define MTK_WDMA_PREF_RX_CFG_PREF_EN			BIT(0)
-+#define MTK_WDMA_PREF_RX_CFG_PREF_BUSY			BIT(1)
-+
-+#define MTK_WDMA_PREF_RX_FIFO_CFG			0x2e0
-+#define MTK_WDMA_PREF_RX_FIFO_CFG_RING0_CLEAR		BIT(0)
-+#define MTK_WDMA_PREF_RX_FIFO_CFG_RING1_CLEAR		BIT(16)
-+
-+#define MTK_WDMA_PREF_TX_FIFO_CFG			0x2d4
-+#define MTK_WDMA_PREF_TX_FIFO_CFG_RING0_CLEAR		BIT(0)
-+#define MTK_WDMA_PREF_TX_FIFO_CFG_RING1_CLEAR		BIT(16)
-+
-+#define MTK_WDMA_PREF_SIDX_CFG				0x2e4
-+#define MTK_WDMA_PREF_SIDX_CFG_TX_RING_CLEAR		GENMASK(3, 0)
-+#define MTK_WDMA_PREF_SIDX_CFG_RX_RING_CLEAR		GENMASK(5, 4)
- 
- #define MTK_WDMA_WRBK_TX_CFG				0x300
-+#define MTK_WDMA_WRBK_TX_CFG_WRBK_BUSY			BIT(0)
- #define MTK_WDMA_WRBK_TX_CFG_WRBK_EN			BIT(30)
- 
-+#define MTK_WDMA_WRBK_TX_FIFO_CFG(_n)			(0x304 + (_n) * 0x4)
-+#define MTK_WDMA_WRBK_TX_FIFO_CFG_RING_CLEAR		BIT(0)
-+
- #define MTK_WDMA_WRBK_RX_CFG				0x344
-+#define MTK_WDMA_WRBK_RX_CFG_WRBK_BUSY			BIT(0)
- #define MTK_WDMA_WRBK_RX_CFG_WRBK_EN			BIT(30)
- 
-+#define MTK_WDMA_WRBK_RX_FIFO_CFG(_n)			(0x348 + (_n) * 0x4)
-+#define MTK_WDMA_WRBK_RX_FIFO_CFG_RING_CLEAR		BIT(0)
-+
-+#define MTK_WDMA_WRBK_SIDX_CFG				0x388
-+#define MTK_WDMA_WRBK_SIDX_CFG_TX_RING_CLEAR		GENMASK(3, 0)
-+#define MTK_WDMA_WRBK_SIDX_CFG_RX_RING_CLEAR		GENMASK(5, 4)
-+
- #define MTK_PCIE_MIRROR_MAP(n)				((n) ? 0x4 : 0x0)
- #define MTK_PCIE_MIRROR_MAP_EN				BIT(0)
- #define MTK_PCIE_MIRROR_MAP_WED_ID			BIT(1)
-@@ -465,6 +520,8 @@ struct mtk_wdma_desc {
- #define MTK_WED_RTQM_Q_DBG_BYPASS			BIT(5)
- #define MTK_WED_RTQM_TXDMAD_FPORT			GENMASK(23, 20)
- 
-+#define MTK_WED_RTQM_RST				0xb04
-+
- #define MTK_WED_RTQM_IGRS0_I2HW_DMAD_CNT		0xb1c
- #define MTK_WED_RTQM_IGRS0_I2H_DMAD_CNT(_n)		(0xb20 + (_n) * 0x4)
- #define	MTK_WED_RTQM_IGRS0_I2HW_PKT_CNT			0xb28
-@@ -653,6 +710,9 @@ struct mtk_wdma_desc {
- #define MTK_WED_WPDMA_INT_CTRL_RRO_PG2_CLR		BIT(17)
- #define MTK_WED_WPDMA_INT_CTRL_RRO_PG2_DONE_TRIG	GENMASK(22, 18)
- 
-+#define MTK_WED_RRO_RX_HW_STS				0xf00
-+#define MTK_WED_RX_IND_CMD_BUSY				GENMASK(31, 0)
-+
- #define MTK_WED_RX_IND_CMD_CNT0				0xf20
- #define MTK_WED_RX_IND_CMD_DBG_CNT_EN			BIT(31)
- 
diff --git a/target/linux/generic/backport-6.1/760-v6.9-net-phy-aquantia-add-AQR111-and-AQR111B0-PHY-ID.patch b/target/linux/generic/backport-6.1/760-v6.9-net-phy-aquantia-add-AQR111-and-AQR111B0-PHY-ID.patch
deleted file mode 100644
index 32ac37e8d02e..000000000000
--- a/target/linux/generic/backport-6.1/760-v6.9-net-phy-aquantia-add-AQR111-and-AQR111B0-PHY-ID.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 038ba1dc4e54d51d953f5618d8eb5dd39bd9de25 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 13 Feb 2024 14:35:51 +0100
-Subject: [PATCH] net: phy: aquantia: add AQR111 and AQR111B0 PHY ID
-
-Add Aquantia AQR111 and AQR111B0 PHY ID. These PHY advertise 10G speed
-but actually supports up to 5G speed, hence some manual fixup is needed.
-
-The Aquantia AQR111B0 PHY is just a variant of the AQR111 with smaller
-chip size.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240213133558.1836-1-ansuelsmth@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/phy/aquantia/aquantia_main.c | 52 ++++++++++++++++++++++++
- 1 file changed, 52 insertions(+)
-
---- a/drivers/net/phy/aquantia/aquantia_main.c
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -22,6 +22,8 @@
- #define PHY_ID_AQR107	0x03a1b4e0
- #define PHY_ID_AQCS109	0x03a1b5c2
- #define PHY_ID_AQR405	0x03a1b4b0
-+#define PHY_ID_AQR111	0x03a1b610
-+#define PHY_ID_AQR111B0	0x03a1b612
- #define PHY_ID_AQR113C	0x31c31c12
- 
- #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
-@@ -670,6 +672,16 @@ static int aqr107_probe(struct phy_devic
- 	return aqr_hwmon_probe(phydev);
- }
- 
-+static int aqr111_config_init(struct phy_device *phydev)
-+{
-+	/* AQR111 reports supporting speed up to 10G,
-+	 * however only speeds up to 5G are supported.
-+	 */
-+	phy_set_max_speed(phydev, SPEED_5000);
-+
-+	return aqr107_config_init(phydev);
-+}
-+
- static struct phy_driver aqr_driver[] = {
- {
- 	PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
-@@ -744,6 +756,44 @@ static struct phy_driver aqr_driver[] =
- 	.link_change_notify = aqr107_link_change_notify,
- },
- {
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
-+	.name		= "Aquantia AQR111",
-+	.probe		= aqr107_probe,
-+	.get_rate_matching = aqr107_get_rate_matching,
-+	.config_init	= aqr111_config_init,
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_tunable    = aqr107_get_tunable,
-+	.set_tunable    = aqr107_set_tunable,
-+	.suspend	= aqr107_suspend,
-+	.resume		= aqr107_resume,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+	.link_change_notify = aqr107_link_change_notify,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
-+	.name		= "Aquantia AQR111B0",
-+	.probe		= aqr107_probe,
-+	.get_rate_matching = aqr107_get_rate_matching,
-+	.config_init	= aqr111_config_init,
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_tunable    = aqr107_get_tunable,
-+	.set_tunable    = aqr107_set_tunable,
-+	.suspend	= aqr107_suspend,
-+	.resume		= aqr107_resume,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+	.link_change_notify = aqr107_link_change_notify,
-+},
-+{
- 	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
- 	.name		= "Aquantia AQR405",
- 	.config_aneg    = aqr_config_aneg,
-@@ -782,6 +832,8 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR111) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- 	{ }
- };
diff --git a/target/linux/generic/backport-6.1/761-v6.9-net-phy-aquantia-add-AQR113-PHY-ID.patch b/target/linux/generic/backport-6.1/761-v6.9-net-phy-aquantia-add-AQR113-PHY-ID.patch
deleted file mode 100644
index 073bbbd49d03..000000000000
--- a/target/linux/generic/backport-6.1/761-v6.9-net-phy-aquantia-add-AQR113-PHY-ID.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 71b605d32017e5b8d257db7344bc2f8e8fcc973e Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 15 Feb 2024 16:30:05 +0100
-Subject: [PATCH] net: phy: aquantia: add AQR113 PHY ID
-
-Add Aquantia AQR113 PHY ID. Aquantia AQR113 is just a chip size variant of
-the already supported AQR133C where the only difference is the PHY ID
-and the hw chip size.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/aquantia/aquantia_main.c | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/drivers/net/phy/aquantia/aquantia_main.c
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -24,6 +24,7 @@
- #define PHY_ID_AQR405	0x03a1b4b0
- #define PHY_ID_AQR111	0x03a1b610
- #define PHY_ID_AQR111B0	0x03a1b612
-+#define PHY_ID_AQR113	0x31c31c40
- #define PHY_ID_AQR113C	0x31c31c12
- 
- #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
-@@ -802,6 +803,25 @@ static struct phy_driver aqr_driver[] =
- 	.read_status	= aqr_read_status,
- },
- {
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
-+	.name		= "Aquantia AQR113",
-+	.probe          = aqr107_probe,
-+	.get_rate_matching = aqr107_get_rate_matching,
-+	.config_init    = aqr107_config_init,
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr    = aqr_config_intr,
-+	.handle_interrupt       = aqr_handle_interrupt,
-+	.read_status    = aqr107_read_status,
-+	.get_tunable    = aqr107_get_tunable,
-+	.set_tunable    = aqr107_set_tunable,
-+	.suspend        = aqr107_suspend,
-+	.resume         = aqr107_resume,
-+	.get_sset_count = aqr107_get_sset_count,
-+	.get_strings    = aqr107_get_strings,
-+	.get_stats      = aqr107_get_stats,
-+	.link_change_notify = aqr107_link_change_notify,
-+},
-+{
- 	PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
- 	.name           = "Aquantia AQR113C",
- 	.probe          = aqr107_probe,
-@@ -834,6 +854,7 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR111) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- 	{ }
- };
diff --git a/target/linux/generic/backport-6.1/762-v6.9-net-phy-aquantia-add-AQR813-PHY-ID.patch b/target/linux/generic/backport-6.1/762-v6.9-net-phy-aquantia-add-AQR813-PHY-ID.patch
deleted file mode 100644
index 965b8c91b282..000000000000
--- a/target/linux/generic/backport-6.1/762-v6.9-net-phy-aquantia-add-AQR813-PHY-ID.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 6d47302a3f0ba31445478d518d98bd55918bc8ab Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 15 Feb 2024 22:43:30 +0100
-Subject: [PATCH] net: phy: aquantia: add AQR813 PHY ID
-
-Aquantia AQR813 is the Octal Port variant of the AQR113. Add PHY ID for
-it to provide support for it.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/aquantia/aquantia_main.c | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
-
---- a/drivers/net/phy/aquantia/aquantia_main.c
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -26,6 +26,7 @@
- #define PHY_ID_AQR111B0	0x03a1b612
- #define PHY_ID_AQR113	0x31c31c40
- #define PHY_ID_AQR113C	0x31c31c12
-+#define PHY_ID_AQR813	0x31c31cb2
- 
- #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
- #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-@@ -840,6 +841,25 @@ static struct phy_driver aqr_driver[] =
- 	.get_stats      = aqr107_get_stats,
- 	.link_change_notify = aqr107_link_change_notify,
- },
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
-+	.name		= "Aquantia AQR813",
-+	.probe		= aqr107_probe,
-+	.get_rate_matching = aqr107_get_rate_matching,
-+	.config_init	= aqr107_config_init,
-+	.config_aneg    = aqr_config_aneg,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_tunable    = aqr107_get_tunable,
-+	.set_tunable    = aqr107_set_tunable,
-+	.suspend	= aqr107_suspend,
-+	.resume		= aqr107_resume,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+	.link_change_notify = aqr107_link_change_notify,
-+},
- };
- 
- module_phy_driver(aqr_driver);
-@@ -856,6 +876,7 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
- 	{ }
- };
- 
diff --git a/target/linux/generic/backport-6.1/765-v6.10-net-dsa-introduce-dsa_phylink_to_port.patch b/target/linux/generic/backport-6.1/765-v6.10-net-dsa-introduce-dsa_phylink_to_port.patch
deleted file mode 100644
index 4cef7194ebef..000000000000
--- a/target/linux/generic/backport-6.1/765-v6.10-net-dsa-introduce-dsa_phylink_to_port.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From f13b2b33c7674fa0988dfaa9adb95d7d912b489f Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Wed, 10 Apr 2024 20:42:38 +0100
-Subject: [PATCH 1/2] net: dsa: introduce dsa_phylink_to_port()
-
-We convert from a phylink_config struct to a dsa_port struct in many
-places, let's provide a helper for this.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/E1rudqA-006K9B-85@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- include/net/dsa.h |  6 ++++++
- net/dsa/port.c    | 12 ++++++------
- 2 files changed, 12 insertions(+), 6 deletions(-)
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -337,6 +337,12 @@ struct dsa_port {
- 	struct list_head	vlans;
- };
- 
-+static inline struct dsa_port *
-+dsa_phylink_to_port(struct phylink_config *config)
-+{
-+	return container_of(config, struct dsa_port, pl_config);
-+}
-+
- /* TODO: ideally DSA ports would have a single dp->link_dp member,
-  * and no dst->rtable nor this struct dsa_link would be needed,
-  * but this would require some more complex tree walking,
---- a/net/dsa/port.c
-+++ b/net/dsa/port.c
-@@ -1552,7 +1552,7 @@ static void dsa_port_phylink_validate(st
- 				      unsigned long *supported,
- 				      struct phylink_link_state *state)
- {
--	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
- 	struct dsa_switch *ds = dp->ds;
- 
- 	if (!ds->ops->phylink_validate) {
-@@ -1567,7 +1567,7 @@ static void dsa_port_phylink_validate(st
- static void dsa_port_phylink_mac_pcs_get_state(struct phylink_config *config,
- 					       struct phylink_link_state *state)
- {
--	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
- 	struct dsa_switch *ds = dp->ds;
- 	int err;
- 
-@@ -1589,7 +1589,7 @@ static struct phylink_pcs *
- dsa_port_phylink_mac_select_pcs(struct phylink_config *config,
- 				phy_interface_t interface)
- {
--	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
- 	struct phylink_pcs *pcs = ERR_PTR(-EOPNOTSUPP);
- 	struct dsa_switch *ds = dp->ds;
- 
-@@ -1603,7 +1603,7 @@ static void dsa_port_phylink_mac_config(
- 					unsigned int mode,
- 					const struct phylink_link_state *state)
- {
--	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
- 	struct dsa_switch *ds = dp->ds;
- 
- 	if (!ds->ops->phylink_mac_config)
-@@ -1614,7 +1614,7 @@ static void dsa_port_phylink_mac_config(
- 
- static void dsa_port_phylink_mac_an_restart(struct phylink_config *config)
- {
--	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
- 	struct dsa_switch *ds = dp->ds;
- 
- 	if (!ds->ops->phylink_mac_an_restart)
-@@ -1627,7 +1627,7 @@ static void dsa_port_phylink_mac_link_do
- 					   unsigned int mode,
- 					   phy_interface_t interface)
- {
--	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
- 	struct phy_device *phydev = NULL;
- 	struct dsa_switch *ds = dp->ds;
- 
-@@ -1650,7 +1650,7 @@ static void dsa_port_phylink_mac_link_up
- 					 int speed, int duplex,
- 					 bool tx_pause, bool rx_pause)
- {
--	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
- 	struct dsa_switch *ds = dp->ds;
- 
- 	if (!ds->ops->phylink_mac_link_up) {
diff --git a/target/linux/generic/backport-6.1/766-v6.10-net-dsa-allow-DSA-switch-drivers-to-provide-their-ow.patch b/target/linux/generic/backport-6.1/766-v6.10-net-dsa-allow-DSA-switch-drivers-to-provide-their-ow.patch
deleted file mode 100644
index 0119925ab037..000000000000
--- a/target/linux/generic/backport-6.1/766-v6.10-net-dsa-allow-DSA-switch-drivers-to-provide-their-ow.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From c22d8240fcd73a1c3ec8dcb055bd583fb970c375 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Wed, 10 Apr 2024 20:42:43 +0100
-Subject: [PATCH 2/2] net: dsa: allow DSA switch drivers to provide their own
- phylink mac ops
-
-Rather than having a shim for each and every phylink MAC operation,
-allow DSA switch drivers to provide their own ops structure. When a
-DSA driver provides the phylink MAC operations, the shimmed ops must
-not be provided, so fail an attempt to register a switch with both
-the phylink_mac_ops in struct dsa_switch and the phylink_mac_*
-operations populated in dsa_switch_ops populated.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Link: https://lore.kernel.org/r/E1rudqF-006K9H-Cc@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- include/net/dsa.h |  5 +++++
- net/dsa/dsa.c     | 11 +++++++++++
- net/dsa/port.c    | 26 ++++++++++++++++++++------
- 3 files changed, 36 insertions(+), 6 deletions(-)
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -468,6 +468,11 @@ struct dsa_switch {
- 	const struct dsa_switch_ops	*ops;
- 
- 	/*
-+	 * Allow a DSA switch driver to override the phylink MAC ops
-+	 */
-+	const struct phylink_mac_ops	*phylink_mac_ops;
-+
-+	/*
- 	 * Slave mii_bus and devices for the individual ports.
- 	 */
- 	u32			phys_mii_mask;
---- a/net/dsa/port.c
-+++ b/net/dsa/port.c
-@@ -1675,6 +1675,7 @@ static const struct phylink_mac_ops dsa_
- 
- int dsa_port_phylink_create(struct dsa_port *dp)
- {
-+	const struct phylink_mac_ops *mac_ops;
- 	struct dsa_switch *ds = dp->ds;
- 	phy_interface_t mode;
- 	struct phylink *pl;
-@@ -1694,8 +1695,12 @@ int dsa_port_phylink_create(struct dsa_p
- 	if (ds->ops->phylink_get_caps)
- 		ds->ops->phylink_get_caps(ds, dp->index, &dp->pl_config);
- 
--	pl = phylink_create(&dp->pl_config, of_fwnode_handle(dp->dn),
--			    mode, &dsa_port_phylink_mac_ops);
-+	mac_ops = &dsa_port_phylink_mac_ops;
-+	if (ds->phylink_mac_ops)
-+		mac_ops = ds->phylink_mac_ops;
-+
-+	pl = phylink_create(&dp->pl_config, of_fwnode_handle(dp->dn), mode,
-+			    mac_ops);
- 	if (IS_ERR(pl)) {
- 		pr_err("error creating PHYLINK: %ld\n", PTR_ERR(pl));
- 		return PTR_ERR(pl);
-@@ -1961,12 +1966,23 @@ static void dsa_shared_port_validate_of(
- 		dn, dsa_port_is_cpu(dp) ? "CPU" : "DSA", dp->index);
- }
- 
-+static void dsa_shared_port_link_down(struct dsa_port *dp)
-+{
-+	struct dsa_switch *ds = dp->ds;
-+
-+	if (ds->phylink_mac_ops && ds->phylink_mac_ops->mac_link_down)
-+		ds->phylink_mac_ops->mac_link_down(&dp->pl_config, MLO_AN_FIXED,
-+						   PHY_INTERFACE_MODE_NA);
-+	else if (ds->ops->phylink_mac_link_down)
-+		ds->ops->phylink_mac_link_down(ds, dp->index, MLO_AN_FIXED,
-+					       PHY_INTERFACE_MODE_NA);
-+}
-+
- int dsa_shared_port_link_register_of(struct dsa_port *dp)
- {
- 	struct dsa_switch *ds = dp->ds;
- 	bool missing_link_description;
- 	bool missing_phy_mode;
--	int port = dp->index;
- 
- 	dsa_shared_port_validate_of(dp, &missing_phy_mode,
- 				    &missing_link_description);
-@@ -1982,9 +1998,7 @@ int dsa_shared_port_link_register_of(str
- 				 "Skipping phylink registration for %s port %d\n",
- 				 dsa_port_is_cpu(dp) ? "CPU" : "DSA", dp->index);
- 		} else {
--			if (ds->ops->phylink_mac_link_down)
--				ds->ops->phylink_mac_link_down(ds, port,
--					MLO_AN_FIXED, PHY_INTERFACE_MODE_NA);
-+			dsa_shared_port_link_down(dp);
- 
- 			return dsa_shared_port_phylink_register(dp);
- 		}
---- a/net/dsa/dsa2.c
-+++ b/net/dsa/dsa2.c
-@@ -1758,6 +1758,15 @@ static int dsa_switch_probe(struct dsa_s
- 	if (!ds->num_ports)
- 		return -EINVAL;
- 
-+	if (ds->phylink_mac_ops) {
-+		if (ds->ops->phylink_mac_select_pcs ||
-+		    ds->ops->phylink_mac_config ||
-+		    ds->ops->phylink_mac_link_down ||
-+		    ds->ops->phylink_mac_link_up ||
-+		    ds->ops->adjust_link)
-+			return -EINVAL;
-+	}
-+
- 	if (np) {
- 		err = dsa_switch_parse_of(ds, np);
- 		if (err)
diff --git a/target/linux/generic/backport-6.1/770-net-introduce-napi_is_scheduled-helper.patch b/target/linux/generic/backport-6.1/770-net-introduce-napi_is_scheduled-helper.patch
deleted file mode 100644
index 789b93e9f93a..000000000000
--- a/target/linux/generic/backport-6.1/770-net-introduce-napi_is_scheduled-helper.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 7f3eb2174512fe6c9c0f062e96eccb0d3cc6d5cd Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 18 Oct 2023 14:35:47 +0200
-Subject: [PATCH] net: introduce napi_is_scheduled helper
-
-We currently have napi_if_scheduled_mark_missed that can be used to
-check if napi is scheduled but that does more thing than simply checking
-it and return a bool. Some driver already implement custom function to
-check if napi is scheduled.
-
-Drop these custom function and introduce napi_is_scheduled that simply
-check if napi is scheduled atomically.
-
-Update any driver and code that implement a similar check and instead
-use this new helper.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/chelsio/cxgb3/sge.c  |  8 --------
- drivers/net/wireless/realtek/rtw89/core.c |  2 +-
- include/linux/netdevice.h                 | 23 +++++++++++++++++++++++
- net/core/dev.c                            |  2 +-
- 4 files changed, 25 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
-+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
-@@ -2507,14 +2507,6 @@ static int napi_rx_handler(struct napi_s
- 	return work_done;
- }
- 
--/*
-- * Returns true if the device is already scheduled for polling.
-- */
--static inline int napi_is_scheduled(struct napi_struct *napi)
--{
--	return test_bit(NAPI_STATE_SCHED, &napi->state);
--}
--
- /**
-  *	process_pure_responses - process pure responses from a response queue
-  *	@adap: the adapter
---- a/drivers/net/wireless/realtek/rtw89/core.c
-+++ b/drivers/net/wireless/realtek/rtw89/core.c
-@@ -1479,7 +1479,7 @@ static void rtw89_core_rx_to_mac80211(st
- 	struct napi_struct *napi = &rtwdev->napi;
- 
- 	/* In low power mode, napi isn't scheduled. Receive it to netif. */
--	if (unlikely(!test_bit(NAPI_STATE_SCHED, &napi->state)))
-+	if (unlikely(!napi_is_scheduled(napi)))
- 		napi = NULL;
- 
- 	rtw89_core_hw_to_sband_rate(rx_status);
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -468,6 +468,29 @@ static inline bool napi_prefer_busy_poll
- 	return test_bit(NAPI_STATE_PREFER_BUSY_POLL, &n->state);
- }
- 
-+/**
-+ * napi_is_scheduled - test if NAPI is scheduled
-+ * @n: NAPI context
-+ *
-+ * This check is "best-effort". With no locking implemented,
-+ * a NAPI can be scheduled or terminate right after this check
-+ * and produce not precise results.
-+ *
-+ * NAPI_STATE_SCHED is an internal state, napi_is_scheduled
-+ * should not be used normally and napi_schedule should be
-+ * used instead.
-+ *
-+ * Use only if the driver really needs to check if a NAPI
-+ * is scheduled for example in the context of delayed timer
-+ * that can be skipped if a NAPI is already scheduled.
-+ *
-+ * Return True if NAPI is scheduled, False otherwise.
-+ */
-+static inline bool napi_is_scheduled(struct napi_struct *n)
-+{
-+	return test_bit(NAPI_STATE_SCHED, &n->state);
-+}
-+
- bool napi_schedule_prep(struct napi_struct *n);
- 
- /**
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -6533,7 +6533,7 @@ static int __napi_poll(struct napi_struc
- 	 * accidentally calling ->poll() when NAPI is not scheduled.
- 	 */
- 	work = 0;
--	if (test_bit(NAPI_STATE_SCHED, &n->state)) {
-+	if (napi_is_scheduled(n)) {
- 		work = n->poll(n, weight);
- 		trace_napi_poll(n, work, weight);
- 	}
diff --git a/target/linux/generic/backport-6.1/771-v6.7-01-net-stmmac-improve-TX-timer-arm-logic.patch b/target/linux/generic/backport-6.1/771-v6.7-01-net-stmmac-improve-TX-timer-arm-logic.patch
deleted file mode 100644
index aa0d730bc8a0..000000000000
--- a/target/linux/generic/backport-6.1/771-v6.7-01-net-stmmac-improve-TX-timer-arm-logic.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 2d1a42cf7f77cda54dbbee18d00b1200e7bc22aa Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 18 Oct 2023 14:35:48 +0200
-Subject: [PATCH 1/3] net: stmmac: improve TX timer arm logic
-
-There is currently a problem with the TX timer getting armed multiple
-unnecessary times causing big performance regression on some device that
-suffer from heavy handling of hrtimer rearm.
-
-The use of the TX timer is an old implementation that predates the napi
-implementation and the interrupt enable/disable handling.
-
-Due to stmmac being a very old code, the TX timer was never evaluated
-again with this new implementation and was kept there causing
-performance regression. The performance regression started to appear
-with kernel version 4.19 with 8fce33317023 ("net: stmmac: Rework coalesce
-timer and fix multi-queue races") where the timer was reduced to 1ms
-causing it to be armed 40 times more than before.
-
-Decreasing the timer made the problem more present and caused the
-regression in the other of 600-700mbps on some device (regression where
-this was notice is ipq806x).
-
-The problem is in the fact that handling the hrtimer on some target is
-expensive and recent kernel made the timer armed much more times.
-A solution that was proposed was reverting the hrtimer change and use
-mod_timer but such solution would still hide the real problem in the
-current implementation.
-
-To fix the regression, apply some additional logic and skip arming the
-timer when not needed.
-
-Arm the timer ONLY if a napi is not already scheduled. Running the timer
-is redundant since the same function (stmmac_tx_clean) will run in the
-napi TX poll. Also try to cancel any timer if a napi is scheduled to
-prevent redundant run of TX call.
-
-With the following new logic the original performance are restored while
-keeping using the hrtimer.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- .../net/ethernet/stmicro/stmmac/stmmac_main.c  | 18 +++++++++++++++---
- 1 file changed, 15 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -2974,13 +2974,25 @@ static void stmmac_tx_timer_arm(struct s
- {
- 	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
- 	u32 tx_coal_timer = priv->tx_coal_timer[queue];
-+	struct stmmac_channel *ch;
-+	struct napi_struct *napi;
- 
- 	if (!tx_coal_timer)
- 		return;
- 
--	hrtimer_start(&tx_q->txtimer,
--		      STMMAC_COAL_TIMER(tx_coal_timer),
--		      HRTIMER_MODE_REL);
-+	ch = &priv->channel[tx_q->queue_index];
-+	napi = tx_q->xsk_pool ? &ch->rxtx_napi : &ch->tx_napi;
-+
-+	/* Arm timer only if napi is not already scheduled.
-+	 * Try to cancel any timer if napi is scheduled, timer will be armed
-+	 * again in the next scheduled napi.
-+	 */
-+	if (unlikely(!napi_is_scheduled(napi)))
-+		hrtimer_start(&tx_q->txtimer,
-+			      STMMAC_COAL_TIMER(tx_coal_timer),
-+			      HRTIMER_MODE_REL);
-+	else
-+		hrtimer_try_to_cancel(&tx_q->txtimer);
- }
- 
- /**
diff --git a/target/linux/generic/backport-6.1/771-v6.7-02-net-stmmac-move-TX-timer-arm-after-DMA-enable.patch b/target/linux/generic/backport-6.1/771-v6.7-02-net-stmmac-move-TX-timer-arm-after-DMA-enable.patch
deleted file mode 100644
index 87361206540a..000000000000
--- a/target/linux/generic/backport-6.1/771-v6.7-02-net-stmmac-move-TX-timer-arm-after-DMA-enable.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From a594166387fe08e6f5a32130c400249a35b298f9 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 18 Oct 2023 14:35:49 +0200
-Subject: [PATCH 2/3] net: stmmac: move TX timer arm after DMA enable
-
-Move TX timer arm call after DMA interrupt is enabled again.
-
-The TX timer arm function changed logic and now is skipped if a napi is
-already scheduled. By moving the TX timer arm call after DMA is enabled,
-we permit to correctly skip if a DMA interrupt has been fired and a napi
-has been scheduled again.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 22 +++++++++++++++----
- 1 file changed, 18 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
-@@ -2527,9 +2527,13 @@ static void stmmac_bump_dma_threshold(st
-  * @priv: driver private structure
-  * @budget: napi budget limiting this functions packet handling
-  * @queue: TX queue index
-+ * @pending_packets: signal to arm the TX coal timer
-  * Description: it reclaims the transmit resources after transmission completes.
-+ * If some packets still needs to be handled, due to TX coalesce, set
-+ * pending_packets to true to make NAPI arm the TX coal timer.
-  */
--static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue)
-+static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue,
-+			   bool *pending_packets)
- {
- 	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
- 	unsigned int bytes_compl = 0, pkts_compl = 0;
-@@ -2692,7 +2696,7 @@ static int stmmac_tx_clean(struct stmmac
- 
- 	/* We still have pending packets, let's call for a new scheduling */
- 	if (tx_q->dirty_tx != tx_q->cur_tx)
--		stmmac_tx_timer_arm(priv, queue);
-+		*pending_packets = true;
- 
- 	__netif_tx_unlock_bh(netdev_get_tx_queue(priv->dev, queue));
- 
-@@ -5490,12 +5494,13 @@ static int stmmac_napi_poll_tx(struct na
- 	struct stmmac_channel *ch =
- 		container_of(napi, struct stmmac_channel, tx_napi);
- 	struct stmmac_priv *priv = ch->priv_data;
-+	bool pending_packets = false;
- 	u32 chan = ch->index;
- 	int work_done;
- 
- 	priv->xstats.napi_poll++;
- 
--	work_done = stmmac_tx_clean(priv, budget, chan);
-+	work_done = stmmac_tx_clean(priv, budget, chan, &pending_packets);
- 	work_done = min(work_done, budget);
- 
- 	if (work_done < budget && napi_complete_done(napi, work_done)) {
-@@ -5506,6 +5511,10 @@ static int stmmac_napi_poll_tx(struct na
- 		spin_unlock_irqrestore(&ch->lock, flags);
- 	}
- 
-+	/* TX still have packet to handle, check if we need to arm tx timer */
-+	if (pending_packets)
-+		stmmac_tx_timer_arm(priv, chan);
-+
- 	return work_done;
- }
- 
-@@ -5514,12 +5523,13 @@ static int stmmac_napi_poll_rxtx(struct
- 	struct stmmac_channel *ch =
- 		container_of(napi, struct stmmac_channel, rxtx_napi);
- 	struct stmmac_priv *priv = ch->priv_data;
-+	bool tx_pending_packets = false;
- 	int rx_done, tx_done, rxtx_done;
- 	u32 chan = ch->index;
- 
- 	priv->xstats.napi_poll++;
- 
--	tx_done = stmmac_tx_clean(priv, budget, chan);
-+	tx_done = stmmac_tx_clean(priv, budget, chan, &tx_pending_packets);
- 	tx_done = min(tx_done, budget);
- 
- 	rx_done = stmmac_rx_zc(priv, budget, chan);
-@@ -5544,6 +5554,10 @@ static int stmmac_napi_poll_rxtx(struct
- 		spin_unlock_irqrestore(&ch->lock, flags);
- 	}
- 
-+	/* TX still have packet to handle, check if we need to arm tx timer */
-+	if (tx_pending_packets)
-+		stmmac_tx_timer_arm(priv, chan);
-+
- 	return min(rxtx_done, budget - 1);
- }
- 
diff --git a/target/linux/generic/backport-6.1/771-v6.7-03-net-stmmac-increase-TX-coalesce-timer-to-5ms.patch b/target/linux/generic/backport-6.1/771-v6.7-03-net-stmmac-increase-TX-coalesce-timer-to-5ms.patch
deleted file mode 100644
index bce54eba4f06..000000000000
--- a/target/linux/generic/backport-6.1/771-v6.7-03-net-stmmac-increase-TX-coalesce-timer-to-5ms.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 039550960a2235cfe2dfaa773df9f98f8da31a0c Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 18 Oct 2023 14:35:50 +0200
-Subject: [PATCH 3/3] net: stmmac: increase TX coalesce timer to 5ms
-
-Commit 8fce33317023 ("net: stmmac: Rework coalesce timer and fix
-multi-queue races") decreased the TX coalesce timer from 40ms to 1ms.
-
-This caused some performance regression on some target (regression was
-reported at least on ipq806x) in the order of 600mbps dropping from
-gigabit handling to only 200mbps.
-
-The problem was identified in the TX timer getting armed too much time.
-While this was fixed and improved in another commit, performance can be
-improved even further by increasing the timer delay a bit moving from
-1ms to 5ms.
-
-The value is a good balance between battery saving by prevending too
-much interrupt to be generated and permitting good performance for
-internet oriented devices.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/stmicro/stmmac/common.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/stmicro/stmmac/common.h
-+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
-@@ -287,7 +287,7 @@ struct stmmac_safety_stats {
- #define MIN_DMA_RIWT		0x10
- #define DEF_DMA_RIWT		0xa0
- /* Tx coalesce parameters */
--#define STMMAC_COAL_TX_TIMER	1000
-+#define STMMAC_COAL_TX_TIMER	5000
- #define STMMAC_MAX_COAL_TX_TICK	100000
- #define STMMAC_TX_MAX_FRAMES	256
- #define STMMAC_TX_FRAMES	25
diff --git a/target/linux/generic/backport-6.1/777-v6.2-04-net-dsa-qca8k-introduce-single-mii-read-write-lo-hi.patch b/target/linux/generic/backport-6.1/777-v6.2-04-net-dsa-qca8k-introduce-single-mii-read-write-lo-hi.patch
deleted file mode 100644
index c0320ad6f9d8..000000000000
--- a/target/linux/generic/backport-6.1/777-v6.2-04-net-dsa-qca8k-introduce-single-mii-read-write-lo-hi.patch
+++ /dev/null
@@ -1,150 +0,0 @@
-From cfbd6de588ef659c198083205dc954a6d3ed2aec Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 29 Dec 2022 17:33:35 +0100
-Subject: [PATCH 4/5] net: dsa: qca8k: introduce single mii read/write lo/hi
-
-It may be useful to read/write just the lo or hi half of a reg.
-
-This is especially useful for phy poll with the use of mdio master.
-The mdio master reg is composed by the first 16 bit related to setup and
-the other half with the returned data or data to write.
-
-Refactor the mii function to permit single mii read/write of lo or hi
-half of the reg.
-
-Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 106 ++++++++++++++++++++++++-------
- 1 file changed, 84 insertions(+), 22 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -37,42 +37,104 @@ qca8k_split_addr(u32 regaddr, u16 *r1, u
- }
- 
- static int
--qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
-+qca8k_mii_write_lo(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
- {
- 	int ret;
-+	u16 lo;
- 
--	ret = bus->read(bus, phy_id, regnum);
--	if (ret >= 0) {
--		*val = ret;
--		ret = bus->read(bus, phy_id, regnum + 1);
--		*val |= ret << 16;
--	}
-+	lo = val & 0xffff;
-+	ret = bus->write(bus, phy_id, regnum, lo);
-+	if (ret < 0)
-+		dev_err_ratelimited(&bus->dev,
-+				    "failed to write qca8k 32bit lo register\n");
-+
-+	return ret;
-+}
- 
--	if (ret < 0) {
-+static int
-+qca8k_mii_write_hi(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
-+{
-+	int ret;
-+	u16 hi;
-+
-+	hi = (u16)(val >> 16);
-+	ret = bus->write(bus, phy_id, regnum, hi);
-+	if (ret < 0)
- 		dev_err_ratelimited(&bus->dev,
--				    "failed to read qca8k 32bit register\n");
--		*val = 0;
--		return ret;
--	}
-+				    "failed to write qca8k 32bit hi register\n");
- 
-+	return ret;
-+}
-+
-+static int
-+qca8k_mii_read_lo(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
-+{
-+	int ret;
-+
-+	ret = bus->read(bus, phy_id, regnum);
-+	if (ret < 0)
-+		goto err;
-+
-+	*val = ret & 0xffff;
- 	return 0;
-+
-+err:
-+	dev_err_ratelimited(&bus->dev,
-+			    "failed to read qca8k 32bit lo register\n");
-+	*val = 0;
-+
-+	return ret;
- }
- 
--static void
--qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
-+static int
-+qca8k_mii_read_hi(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
- {
--	u16 lo, hi;
- 	int ret;
- 
--	lo = val & 0xffff;
--	hi = (u16)(val >> 16);
-+	ret = bus->read(bus, phy_id, regnum);
-+	if (ret < 0)
-+		goto err;
- 
--	ret = bus->write(bus, phy_id, regnum, lo);
--	if (ret >= 0)
--		ret = bus->write(bus, phy_id, regnum + 1, hi);
-+	*val = ret << 16;
-+	return 0;
-+
-+err:
-+	dev_err_ratelimited(&bus->dev,
-+			    "failed to read qca8k 32bit hi register\n");
-+	*val = 0;
-+
-+	return ret;
-+}
-+
-+static int
-+qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
-+{
-+	u32 hi, lo;
-+	int ret;
-+
-+	*val = 0;
-+
-+	ret = qca8k_mii_read_lo(bus, phy_id, regnum, &lo);
- 	if (ret < 0)
--		dev_err_ratelimited(&bus->dev,
--				    "failed to write qca8k 32bit register\n");
-+		goto err;
-+
-+	ret = qca8k_mii_read_hi(bus, phy_id, regnum + 1, &hi);
-+	if (ret < 0)
-+		goto err;
-+
-+	*val = lo | hi;
-+
-+err:
-+	return ret;
-+}
-+
-+static void
-+qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
-+{
-+	if (qca8k_mii_write_lo(bus, phy_id, regnum, val) < 0)
-+		return;
-+
-+	qca8k_mii_write_hi(bus, phy_id, regnum + 1, val);
- }
- 
- static int
diff --git a/target/linux/generic/backport-6.1/777-v6.2-05-net-dsa-qca8k-improve-mdio-master-read-write-by-usin.patch b/target/linux/generic/backport-6.1/777-v6.2-05-net-dsa-qca8k-improve-mdio-master-read-write-by-usin.patch
deleted file mode 100644
index dcafad0fd5ed..000000000000
--- a/target/linux/generic/backport-6.1/777-v6.2-05-net-dsa-qca8k-improve-mdio-master-read-write-by-usin.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From a4165830ca237f2b3318faf62562bce8ce12a389 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 29 Dec 2022 17:33:36 +0100
-Subject: [PATCH 5/5] net: dsa: qca8k: improve mdio master read/write by using
- single lo/hi
-
-Improve mdio master read/write by using singe mii read/write lo/hi.
-
-In a read and write we need to poll the mdio master regs in a busy loop
-to check for a specific bit present in the upper half of the reg. We can
-ignore the other half since it won't contain useful data. This will save
-an additional useless read for each read and write operation.
-
-In a read operation the returned data is present in the mdio master reg
-lower half. We can ignore the other half since it won't contain useful
-data. This will save an additional useless read for each read operation.
-
-In a read operation it's needed to just set the hi half of the mdio
-master reg as the lo half will be replaced by the result. This will save
-an additional useless write for each read operation.
-
-Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -754,9 +754,9 @@ qca8k_mdio_busy_wait(struct mii_bus *bus
- 
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
--	ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0,
-+	ret = read_poll_timeout(qca8k_mii_read_hi, ret1, !(val & mask), 0,
- 				QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
--				bus, 0x10 | r2, r1, &val);
-+				bus, 0x10 | r2, r1 + 1, &val);
- 
- 	/* Check if qca8k_read has failed for a different reason
- 	 * before returnting -ETIMEDOUT
-@@ -798,7 +798,7 @@ qca8k_mdio_write(struct qca8k_priv *priv
- 
- exit:
- 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
--	qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
-+	qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, 0);
- 
- 	mutex_unlock(&bus->mdio_lock);
- 
-@@ -828,18 +828,18 @@ qca8k_mdio_read(struct qca8k_priv *priv,
- 	if (ret)
- 		goto exit;
- 
--	qca8k_mii_write32(bus, 0x10 | r2, r1, val);
-+	qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, val);
- 
- 	ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
- 				   QCA8K_MDIO_MASTER_BUSY);
- 	if (ret)
- 		goto exit;
- 
--	ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
-+	ret = qca8k_mii_read_lo(bus, 0x10 | r2, r1, &val);
- 
- exit:
- 	/* even if the busy_wait timeouts try to clear the MASTER_EN */
--	qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
-+	qca8k_mii_write_hi(bus, 0x10 | r2, r1 + 1, 0);
- 
- 	mutex_unlock(&bus->mdio_lock);
- 
diff --git a/target/linux/generic/backport-6.1/778-v6.3-01-net-dsa-qca8k-add-QCA8K_ATU_TABLE_SIZE-define-for-fd.patch b/target/linux/generic/backport-6.1/778-v6.3-01-net-dsa-qca8k-add-QCA8K_ATU_TABLE_SIZE-define-for-fd.patch
deleted file mode 100644
index 9331fd536d9a..000000000000
--- a/target/linux/generic/backport-6.1/778-v6.3-01-net-dsa-qca8k-add-QCA8K_ATU_TABLE_SIZE-define-for-fd.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From e03cea60c3db8c6b011cc36ecef9281dff8377f3 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 25 Jan 2023 21:35:16 +0100
-Subject: [PATCH] net: dsa: qca8k: add QCA8K_ATU_TABLE_SIZE define for fdb
- access
-
-Add and use QCA8K_ATU_TABLE_SIZE instead of hardcoding the ATU size with
-a pure number and using sizeof on the array.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-common.c | 10 ++++++----
- drivers/net/dsa/qca/qca8k.h        |  2 ++
- 2 files changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-common.c
-+++ b/drivers/net/dsa/qca/qca8k-common.c
-@@ -150,11 +150,12 @@ static int qca8k_busy_wait(struct qca8k_
- 
- static int qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
- {
--	u32 reg[3];
-+	u32 reg[QCA8K_ATU_TABLE_SIZE];
- 	int ret;
- 
- 	/* load the ARL table into an array */
--	ret = qca8k_bulk_read(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg));
-+	ret = qca8k_bulk_read(priv, QCA8K_REG_ATU_DATA0, reg,
-+			      QCA8K_ATU_TABLE_SIZE * sizeof(u32));
- 	if (ret)
- 		return ret;
- 
-@@ -178,7 +179,7 @@ static int qca8k_fdb_read(struct qca8k_p
- static void qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask,
- 			    const u8 *mac, u8 aging)
- {
--	u32 reg[3] = { 0 };
-+	u32 reg[QCA8K_ATU_TABLE_SIZE] = { 0 };
- 
- 	/* vid - 83:72 */
- 	reg[2] = FIELD_PREP(QCA8K_ATU_VID_MASK, vid);
-@@ -195,7 +196,8 @@ static void qca8k_fdb_write(struct qca8k
- 	reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]);
- 
- 	/* load the array into the ARL table */
--	qca8k_bulk_write(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg));
-+	qca8k_bulk_write(priv, QCA8K_REG_ATU_DATA0, reg,
-+			 QCA8K_ATU_TABLE_SIZE * sizeof(u32));
- }
- 
- static int qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd,
---- a/drivers/net/dsa/qca/qca8k.h
-+++ b/drivers/net/dsa/qca/qca8k.h
-@@ -148,6 +148,8 @@
- #define QCA8K_REG_IPV4_PRI_ADDR_MASK			0x474
- 
- /* Lookup registers */
-+#define QCA8K_ATU_TABLE_SIZE				3 /* 12 bytes wide table / sizeof(u32) */
-+
- #define QCA8K_REG_ATU_DATA0				0x600
- #define   QCA8K_ATU_ADDR2_MASK				GENMASK(31, 24)
- #define   QCA8K_ATU_ADDR3_MASK				GENMASK(23, 16)
diff --git a/target/linux/generic/backport-6.1/778-v6.3-02-net-dsa-qca8k-convert-to-regmap-read-write-API.patch b/target/linux/generic/backport-6.1/778-v6.3-02-net-dsa-qca8k-convert-to-regmap-read-write-API.patch
deleted file mode 100644
index b8f8071b0a14..000000000000
--- a/target/linux/generic/backport-6.1/778-v6.3-02-net-dsa-qca8k-convert-to-regmap-read-write-API.patch
+++ /dev/null
@@ -1,261 +0,0 @@
-From c766e077d927e1775902c18827205ea2ade3a35d Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 25 Jan 2023 21:35:17 +0100
-Subject: [PATCH] net: dsa: qca8k: convert to regmap read/write API
-
-Convert qca8k to regmap read/write bulk API. The mgmt eth can write up
-to 32 bytes of data at times. Currently we use a custom function to do
-it but regmap now supports declaration of read/write bulk even without a
-bus.
-
-Drop the custom function and rework the regmap function to this new
-implementation.
-
-Rework the qca8k_fdb_read/write function to use the new
-regmap_bulk_read/write as the old qca8k_bulk_read/write are now dropped.
-
-Cc: Mark Brown <broonie@kernel.org>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-8xxx.c   | 92 ++++++++++++++++++++++++------
- drivers/net/dsa/qca/qca8k-common.c | 47 ++-------------
- drivers/net/dsa/qca/qca8k.h        |  3 -
- 3 files changed, 77 insertions(+), 65 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -425,16 +425,12 @@ qca8k_regmap_update_bits_eth(struct qca8
- }
- 
- static int
--qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
-+qca8k_read_mii(struct qca8k_priv *priv, uint32_t reg, uint32_t *val)
- {
--	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
- 	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	int ret;
- 
--	if (!qca8k_read_eth(priv, reg, val, sizeof(*val)))
--		return 0;
--
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
- 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-@@ -451,16 +447,12 @@ exit:
- }
- 
- static int
--qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
-+qca8k_write_mii(struct qca8k_priv *priv, uint32_t reg, uint32_t val)
- {
--	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
- 	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	int ret;
- 
--	if (!qca8k_write_eth(priv, reg, &val, sizeof(val)))
--		return 0;
--
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
- 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-@@ -477,17 +469,14 @@ exit:
- }
- 
- static int
--qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
-+qca8k_regmap_update_bits_mii(struct qca8k_priv *priv, uint32_t reg,
-+			     uint32_t mask, uint32_t write_val)
- {
--	struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
- 	struct mii_bus *bus = priv->bus;
- 	u16 r1, r2, page;
- 	u32 val;
- 	int ret;
- 
--	if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val))
--		return 0;
--
- 	qca8k_split_addr(reg, &r1, &r2, &page);
- 
- 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-@@ -510,17 +499,84 @@ exit:
- 	return ret;
- }
- 
-+static int
-+qca8k_bulk_read(void *ctx, const void *reg_buf, size_t reg_len,
-+		void *val_buf, size_t val_len)
-+{
-+	int i, count = val_len / sizeof(u32), ret;
-+	u32 reg = *(u32 *)reg_buf & U16_MAX;
-+	struct qca8k_priv *priv = ctx;
-+
-+	if (priv->mgmt_master &&
-+	    !qca8k_read_eth(priv, reg, val_buf, val_len))
-+		return 0;
-+
-+	/* loop count times and increment reg of 4 */
-+	for (i = 0; i < count; i++, reg += sizeof(u32)) {
-+		ret = qca8k_read_mii(priv, reg, val_buf + i);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+qca8k_bulk_gather_write(void *ctx, const void *reg_buf, size_t reg_len,
-+			const void *val_buf, size_t val_len)
-+{
-+	int i, count = val_len / sizeof(u32), ret;
-+	u32 reg = *(u32 *)reg_buf & U16_MAX;
-+	struct qca8k_priv *priv = ctx;
-+	u32 *val = (u32 *)val_buf;
-+
-+	if (priv->mgmt_master &&
-+	    !qca8k_write_eth(priv, reg, val, val_len))
-+		return 0;
-+
-+	/* loop count times, increment reg of 4 and increment val ptr to
-+	 * the next value
-+	 */
-+	for (i = 0; i < count; i++, reg += sizeof(u32), val++) {
-+		ret = qca8k_write_mii(priv, reg, *val);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+qca8k_bulk_write(void *ctx, const void *data, size_t bytes)
-+{
-+	return qca8k_bulk_gather_write(ctx, data, sizeof(u16), data + sizeof(u16),
-+				       bytes - sizeof(u16));
-+}
-+
-+static int
-+qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
-+{
-+	struct qca8k_priv *priv = ctx;
-+
-+	if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val))
-+		return 0;
-+
-+	return qca8k_regmap_update_bits_mii(priv, reg, mask, write_val);
-+}
-+
- static struct regmap_config qca8k_regmap_config = {
- 	.reg_bits = 16,
- 	.val_bits = 32,
- 	.reg_stride = 4,
- 	.max_register = 0x16ac, /* end MIB - Port6 range */
--	.reg_read = qca8k_regmap_read,
--	.reg_write = qca8k_regmap_write,
-+	.read = qca8k_bulk_read,
-+	.write = qca8k_bulk_write,
- 	.reg_update_bits = qca8k_regmap_update_bits,
- 	.rd_table = &qca8k_readable_table,
- 	.disable_locking = true, /* Locking is handled by qca8k read/write */
- 	.cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */
-+	.max_raw_read = 32, /* mgmt eth can read/write up to 8 registers at time */
-+	.max_raw_write = 32,
- };
- 
- static int
-@@ -2112,8 +2168,6 @@ static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
- 
- static const struct qca8k_info_ops qca8xxx_ops = {
- 	.autocast_mib = qca8k_get_ethtool_stats_eth,
--	.read_eth = qca8k_read_eth,
--	.write_eth = qca8k_write_eth,
- };
- 
- static const struct qca8k_match_data qca8327 = {
---- a/drivers/net/dsa/qca/qca8k-common.c
-+++ b/drivers/net/dsa/qca/qca8k-common.c
-@@ -101,45 +101,6 @@ const struct regmap_access_table qca8k_r
- 	.n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
- };
- 
--/* TODO: remove these extra ops when we can support regmap bulk read/write */
--static int qca8k_bulk_read(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
--{
--	int i, count = len / sizeof(u32), ret;
--
--	if (priv->mgmt_master && priv->info->ops->read_eth &&
--	    !priv->info->ops->read_eth(priv, reg, val, len))
--		return 0;
--
--	for (i = 0; i < count; i++) {
--		ret = regmap_read(priv->regmap, reg + (i * 4), val + i);
--		if (ret < 0)
--			return ret;
--	}
--
--	return 0;
--}
--
--/* TODO: remove these extra ops when we can support regmap bulk read/write */
--static int qca8k_bulk_write(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
--{
--	int i, count = len / sizeof(u32), ret;
--	u32 tmp;
--
--	if (priv->mgmt_master && priv->info->ops->write_eth &&
--	    !priv->info->ops->write_eth(priv, reg, val, len))
--		return 0;
--
--	for (i = 0; i < count; i++) {
--		tmp = val[i];
--
--		ret = regmap_write(priv->regmap, reg + (i * 4), tmp);
--		if (ret < 0)
--			return ret;
--	}
--
--	return 0;
--}
--
- static int qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
- {
- 	u32 val;
-@@ -154,8 +115,8 @@ static int qca8k_fdb_read(struct qca8k_p
- 	int ret;
- 
- 	/* load the ARL table into an array */
--	ret = qca8k_bulk_read(priv, QCA8K_REG_ATU_DATA0, reg,
--			      QCA8K_ATU_TABLE_SIZE * sizeof(u32));
-+	ret = regmap_bulk_read(priv->regmap, QCA8K_REG_ATU_DATA0, reg,
-+			       QCA8K_ATU_TABLE_SIZE);
- 	if (ret)
- 		return ret;
- 
-@@ -196,8 +157,8 @@ static void qca8k_fdb_write(struct qca8k
- 	reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]);
- 
- 	/* load the array into the ARL table */
--	qca8k_bulk_write(priv, QCA8K_REG_ATU_DATA0, reg,
--			 QCA8K_ATU_TABLE_SIZE * sizeof(u32));
-+	regmap_bulk_write(priv->regmap, QCA8K_REG_ATU_DATA0, reg,
-+			  QCA8K_ATU_TABLE_SIZE);
- }
- 
- static int qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd,
---- a/drivers/net/dsa/qca/qca8k.h
-+++ b/drivers/net/dsa/qca/qca8k.h
-@@ -330,9 +330,6 @@ struct qca8k_priv;
- 
- struct qca8k_info_ops {
- 	int (*autocast_mib)(struct dsa_switch *ds, int port, u64 *data);
--	/* TODO: remove these extra ops when we can support regmap bulk read/write */
--	int (*read_eth)(struct qca8k_priv *priv, u32 reg, u32 *val, int len);
--	int (*write_eth)(struct qca8k_priv *priv, u32 reg, u32 *val, int len);
- };
- 
- struct qca8k_match_data {
diff --git a/target/linux/generic/backport-6.1/779-v6.5-net-dsa-qca8k-enable-use_single_write-for-qca8xxx.patch b/target/linux/generic/backport-6.1/779-v6.5-net-dsa-qca8k-enable-use_single_write-for-qca8xxx.patch
deleted file mode 100644
index 3619440f075a..000000000000
--- a/target/linux/generic/backport-6.1/779-v6.5-net-dsa-qca8k-enable-use_single_write-for-qca8xxx.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 2c39dd025da489cf87d26469d9f5ff19715324a0 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 24 Jul 2023 05:25:28 +0200
-Subject: [PATCH 1/4] net: dsa: qca8k: enable use_single_write for qca8xxx
-
-The qca8xxx switch supports 2 way to write reg values, a slow way using
-mdio and a fast way by sending specially crafted mgmt packet to
-read/write reg.
-
-The fast way can support up to 32 bytes of data as eth packet are used
-to send/receive.
-
-This correctly works for almost the entire regmap of the switch but with
-the use of some kernel selftests for dsa drivers it was found a funny
-and interesting hw defect/limitation.
-
-For some specific reg, bulk write won't work and will result in writing
-only part of the requested regs resulting in half data written. This was
-especially hard to track and discover due to the total strangeness of
-the problem and also by the specific regs where this occurs.
-
-This occurs in the specific regs of the ATU table, where multiple entry
-needs to be written to compose the entire entry.
-It was discovered that with a bulk write of 12 bytes on
-QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2
-were written, but QCA8K_REG_ATU_DATA1 was always zero.
-Tcpdump was used to make sure the specially crafted packet was correct
-and this was confirmed.
-
-The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1
-resulted in an entry somehow possible as the first bytes of the mac
-address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in
-QCA8K_REG_ATU_DATA2.
-
-Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem
-with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and
-QCA8K_REG_ATU_FUNC correctly written.
-A speculation on the problem might be that there are some kind of
-indirection internally when accessing these regs and they can't be
-accessed all together, due to the fact that it's really a table mapped
-somewhere in the switch SRAM.
-
-Even more funny is the fact that every other reg was tested with all
-kind of combination and they are not affected by this problem. Read
-operation was also tested and always worked so it's not affected by this
-problem.
-
-The problem is not present if we limit writing a single reg at times.
-
-To handle this hardware defect, enable use_single_write so that bulk
-api can correctly split the write in multiple different operation
-effectively reverting to a non-bulk write.
-
-Cc: Mark Brown <broonie@kernel.org>
-Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API")
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Cc: stable@vger.kernel.org
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -575,8 +575,11 @@ static struct regmap_config qca8k_regmap
- 	.rd_table = &qca8k_readable_table,
- 	.disable_locking = true, /* Locking is handled by qca8k read/write */
- 	.cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */
--	.max_raw_read = 32, /* mgmt eth can read/write up to 8 registers at time */
--	.max_raw_write = 32,
-+	.max_raw_read = 32, /* mgmt eth can read up to 8 registers at time */
-+	/* ATU regs suffer from a bug where some data are not correctly
-+	 * written. Disable bulk write to correctly write ATU entry.
-+	 */
-+	.use_single_write = true,
- };
- 
- static int
diff --git a/target/linux/generic/backport-6.1/780-v6.6-01-net-dsa-qca8k-make-learning-configurable-and-keep-of.patch b/target/linux/generic/backport-6.1/780-v6.6-01-net-dsa-qca8k-make-learning-configurable-and-keep-of.patch
deleted file mode 100644
index d31789370e8c..000000000000
--- a/target/linux/generic/backport-6.1/780-v6.6-01-net-dsa-qca8k-make-learning-configurable-and-keep-of.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From 23cfc7172e5297d0bee49ac6f6f8248d1cf0820d Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Sun, 30 Jul 2023 09:41:10 +0200
-Subject: [PATCH 1/4] net: dsa: qca8k: make learning configurable and keep off
- if standalone
-
-Address learning should initially be turned off by the driver for port
-operation in standalone mode, then the DSA core handles changes to it
-via ds->ops->port_bridge_flags().
-
-Currently this is not the case for qca8k where learning is enabled
-unconditionally in qca8k_setup for every user port.
-
-Handle ports configured in standalone mode by making the learning
-configurable and not enabling it by default.
-
-Implement .port_pre_bridge_flags and .port_bridge_flags dsa ops to
-enable learning for bridge that request it and tweak
-.port_stp_state_set to correctly disable learning when port is
-configured in standalone mode.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Link: https://lore.kernel.org/r/20230730074113.21889-2-ansuelsmth@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/qca/qca8k-8xxx.c   |  7 +++--
- drivers/net/dsa/qca/qca8k-common.c | 48 ++++++++++++++++++++++++++++++
- drivers/net/dsa/qca/qca8k.h        |  6 ++++
- 3 files changed, 58 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -1905,9 +1905,8 @@ qca8k_setup(struct dsa_switch *ds)
- 			if (ret)
- 				return ret;
- 
--			/* Enable ARP Auto-learning by default */
--			ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
--					      QCA8K_PORT_LOOKUP_LEARN);
-+			ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
-+						QCA8K_PORT_LOOKUP_LEARN);
- 			if (ret)
- 				return ret;
- 
-@@ -2013,6 +2012,8 @@ static const struct dsa_switch_ops qca8k
- 	.port_change_mtu	= qca8k_port_change_mtu,
- 	.port_max_mtu		= qca8k_port_max_mtu,
- 	.port_stp_state_set	= qca8k_port_stp_state_set,
-+	.port_pre_bridge_flags	= qca8k_port_pre_bridge_flags,
-+	.port_bridge_flags	= qca8k_port_bridge_flags,
- 	.port_bridge_join	= qca8k_port_bridge_join,
- 	.port_bridge_leave	= qca8k_port_bridge_leave,
- 	.port_fast_age		= qca8k_port_fast_age,
---- a/drivers/net/dsa/qca/qca8k-common.c
-+++ b/drivers/net/dsa/qca/qca8k-common.c
-@@ -565,9 +565,26 @@ int qca8k_get_mac_eee(struct dsa_switch
- 	return 0;
- }
- 
-+static int qca8k_port_configure_learning(struct dsa_switch *ds, int port,
-+					 bool learning)
-+{
-+	struct qca8k_priv *priv = ds->priv;
-+
-+	if (learning)
-+		return regmap_set_bits(priv->regmap,
-+				       QCA8K_PORT_LOOKUP_CTRL(port),
-+				       QCA8K_PORT_LOOKUP_LEARN);
-+	else
-+		return regmap_clear_bits(priv->regmap,
-+					 QCA8K_PORT_LOOKUP_CTRL(port),
-+					 QCA8K_PORT_LOOKUP_LEARN);
-+}
-+
- void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
- {
-+	struct dsa_port *dp = dsa_to_port(ds, port);
- 	struct qca8k_priv *priv = ds->priv;
-+	bool learning = false;
- 	u32 stp_state;
- 
- 	switch (state) {
-@@ -582,8 +599,11 @@ void qca8k_port_stp_state_set(struct dsa
- 		break;
- 	case BR_STATE_LEARNING:
- 		stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING;
-+		learning = dp->learning;
- 		break;
- 	case BR_STATE_FORWARDING:
-+		learning = dp->learning;
-+		fallthrough;
- 	default:
- 		stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD;
- 		break;
-@@ -591,6 +611,34 @@ void qca8k_port_stp_state_set(struct dsa
- 
- 	qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
- 		  QCA8K_PORT_LOOKUP_STATE_MASK, stp_state);
-+
-+	qca8k_port_configure_learning(ds, port, learning);
-+}
-+
-+int qca8k_port_pre_bridge_flags(struct dsa_switch *ds, int port,
-+				struct switchdev_brport_flags flags,
-+				struct netlink_ext_ack *extack)
-+{
-+	if (flags.mask & ~BR_LEARNING)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+int qca8k_port_bridge_flags(struct dsa_switch *ds, int port,
-+			    struct switchdev_brport_flags flags,
-+			    struct netlink_ext_ack *extack)
-+{
-+	int ret;
-+
-+	if (flags.mask & BR_LEARNING) {
-+		ret = qca8k_port_configure_learning(ds, port,
-+						    flags.val & BR_LEARNING);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return 0;
- }
- 
- int qca8k_port_bridge_join(struct dsa_switch *ds, int port,
---- a/drivers/net/dsa/qca/qca8k.h
-+++ b/drivers/net/dsa/qca/qca8k.h
-@@ -448,6 +448,12 @@ int qca8k_get_mac_eee(struct dsa_switch
- 
- /* Common bridge function */
- void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
-+int qca8k_port_pre_bridge_flags(struct dsa_switch *ds, int port,
-+				struct switchdev_brport_flags flags,
-+				struct netlink_ext_ack *extack);
-+int qca8k_port_bridge_flags(struct dsa_switch *ds, int port,
-+			    struct switchdev_brport_flags flags,
-+			    struct netlink_ext_ack *extack);
- int qca8k_port_bridge_join(struct dsa_switch *ds, int port,
- 			   struct dsa_bridge bridge,
- 			   bool *tx_fwd_offload,
diff --git a/target/linux/generic/backport-6.1/780-v6.6-02-net-dsa-qca8k-limit-user-ports-access-to-the-first-C.patch b/target/linux/generic/backport-6.1/780-v6.6-02-net-dsa-qca8k-limit-user-ports-access-to-the-first-C.patch
deleted file mode 100644
index 4b457f67de8a..000000000000
--- a/target/linux/generic/backport-6.1/780-v6.6-02-net-dsa-qca8k-limit-user-ports-access-to-the-first-C.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 18e8feae4a807994e4906d659116d249bfecd4c5 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Sun, 30 Jul 2023 09:41:11 +0200
-Subject: [PATCH 2/4] net: dsa: qca8k: limit user ports access to the first CPU
- port on setup
-
-In preparation for multi-CPU support, set CPU port LOOKUP MEMBER outside
-the port loop and setup the LOOKUP MEMBER mask for user ports only to
-the first CPU port.
-
-This is to handle flooding condition where every CPU port is set as
-target and prevent packet duplication for unknown frames from user ports.
-
-Secondary CPU port LOOKUP MEMBER mask will be setup later when
-port_change_master will be implemented.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20230730074113.21889-3-ansuelsmth@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 14 ++++++--------
- 1 file changed, 6 insertions(+), 8 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -1885,18 +1885,16 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
-+	/* CPU port gets connected to all user ports of the switch */
-+	ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port),
-+			QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
-+	if (ret)
-+		return ret;
-+
- 	/* Setup connection between CPU port & user ports
- 	 * Configure specific switch configuration for ports
- 	 */
- 	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
--		/* CPU port gets connected to all user ports of the switch */
--		if (dsa_is_cpu_port(ds, i)) {
--			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
--					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
--			if (ret)
--				return ret;
--		}
--
- 		/* Individual user ports get connected to CPU port only */
- 		if (dsa_is_user_port(ds, i)) {
- 			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
diff --git a/target/linux/generic/backport-6.1/780-v6.6-03-net-dsa-qca8k-move-qca8xxx-hol-fixup-to-separate-fun.patch b/target/linux/generic/backport-6.1/780-v6.6-03-net-dsa-qca8k-move-qca8xxx-hol-fixup-to-separate-fun.patch
deleted file mode 100644
index f556628b5b5d..000000000000
--- a/target/linux/generic/backport-6.1/780-v6.6-03-net-dsa-qca8k-move-qca8xxx-hol-fixup-to-separate-fun.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From a9108b0712bf018dc69020864b21485b71b17dfc Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Sun, 30 Jul 2023 09:41:12 +0200
-Subject: [PATCH 3/4] net: dsa: qca8k: move qca8xxx hol fixup to separate
- function
-
-Move qca8xxx hol fixup to separate function to tidy things up and to
-permit using a more efficent loop in future patch.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Link: https://lore.kernel.org/r/20230730074113.21889-4-ansuelsmth@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 78 +++++++++++++++++---------------
- 1 file changed, 42 insertions(+), 36 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -1795,6 +1795,46 @@ static int qca8k_connect_tag_protocol(st
- 	return 0;
- }
- 
-+static void qca8k_setup_hol_fixup(struct qca8k_priv *priv, int port)
-+{
-+	u32 mask;
-+
-+	switch (port) {
-+	/* The 2 CPU port and port 5 requires some different
-+	 * priority than any other ports.
-+	 */
-+	case 0:
-+	case 5:
-+	case 6:
-+		mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
-+		break;
-+	default:
-+		mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
-+			QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
-+	}
-+	regmap_write(priv->regmap, QCA8K_REG_PORT_HOL_CTRL0(port), mask);
-+
-+	mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
-+	       QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
-+	       QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
-+	       QCA8K_PORT_HOL_CTRL1_WRED_EN;
-+	regmap_update_bits(priv->regmap, QCA8K_REG_PORT_HOL_CTRL1(port),
-+			   QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
-+			   QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
-+			   QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
-+			   QCA8K_PORT_HOL_CTRL1_WRED_EN,
-+			   mask);
-+}
-+
- static int
- qca8k_setup(struct dsa_switch *ds)
- {
-@@ -1930,42 +1970,8 @@ qca8k_setup(struct dsa_switch *ds)
- 		 * missing settings to improve switch stability under load condition.
- 		 * This problem is limited to qca8337 and other qca8k switch are not affected.
- 		 */
--		if (priv->switch_id == QCA8K_ID_QCA8337) {
--			switch (i) {
--			/* The 2 CPU port and port 5 requires some different
--			 * priority than any other ports.
--			 */
--			case 0:
--			case 5:
--			case 6:
--				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
--					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
--					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
--					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
--					QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
--					QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
--					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
--				break;
--			default:
--				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
--					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
--					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
--					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
--					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
--			}
--			qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
--
--			mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
--			QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
--			QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
--			QCA8K_PORT_HOL_CTRL1_WRED_EN;
--			qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
--				  QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
--				  QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
--				  QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
--				  QCA8K_PORT_HOL_CTRL1_WRED_EN,
--				  mask);
--		}
-+		if (priv->switch_id == QCA8K_ID_QCA8337)
-+			qca8k_setup_hol_fixup(priv, i);
- 	}
- 
- 	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
diff --git a/target/linux/generic/backport-6.1/780-v6.6-04-net-dsa-qca8k-use-dsa_for_each-macro-instead-of-for-.patch b/target/linux/generic/backport-6.1/780-v6.6-04-net-dsa-qca8k-use-dsa_for_each-macro-instead-of-for-.patch
deleted file mode 100644
index faa0142ca997..000000000000
--- a/target/linux/generic/backport-6.1/780-v6.6-04-net-dsa-qca8k-use-dsa_for_each-macro-instead-of-for-.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From 01e6f8ad8d26ced14b0cf288c42e55d03a7c5070 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Sun, 30 Jul 2023 09:41:13 +0200
-Subject: [PATCH 4/4] net: dsa: qca8k: use dsa_for_each macro instead of for
- loop
-
-Convert for loop to dsa_for_each macro to save some redundant write on
-unconnected/unused port and tidy things up.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Link: https://lore.kernel.org/r/20230730074113.21889-5-ansuelsmth@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 107 ++++++++++++++++---------------
- 1 file changed, 54 insertions(+), 53 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -1839,7 +1839,8 @@ static int
- qca8k_setup(struct dsa_switch *ds)
- {
- 	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
--	int cpu_port, ret, i;
-+	struct dsa_port *dp;
-+	int cpu_port, ret;
- 	u32 mask;
- 
- 	cpu_port = qca8k_find_cpu_port(ds);
-@@ -1890,27 +1891,27 @@ qca8k_setup(struct dsa_switch *ds)
- 		dev_warn(priv->dev, "mib init failed");
- 
- 	/* Initial setup of all ports */
--	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-+	dsa_switch_for_each_port(dp, ds) {
- 		/* Disable forwarding by default on all ports */
--		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
-+		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(dp->index),
- 				QCA8K_PORT_LOOKUP_MEMBER, 0);
- 		if (ret)
- 			return ret;
-+	}
- 
--		/* Enable QCA header mode on all cpu ports */
--		if (dsa_is_cpu_port(ds, i)) {
--			ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
--					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
--					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
--			if (ret) {
--				dev_err(priv->dev, "failed enabling QCA header mode");
--				return ret;
--			}
-+	/* Disable MAC by default on all user ports */
-+	dsa_switch_for_each_user_port(dp, ds)
-+		qca8k_port_set_status(priv, dp->index, 0);
-+
-+	/* Enable QCA header mode on all cpu ports */
-+	dsa_switch_for_each_cpu_port(dp, ds) {
-+		ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(dp->index),
-+				  FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
-+				  FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
-+		if (ret) {
-+			dev_err(priv->dev, "failed enabling QCA header mode on port %d", dp->index);
-+			return ret;
- 		}
--
--		/* Disable MAC by default on all user ports */
--		if (dsa_is_user_port(ds, i))
--			qca8k_port_set_status(priv, i, 0);
- 	}
- 
- 	/* Forward all unknown frames to CPU port for Linux processing
-@@ -1932,48 +1933,48 @@ qca8k_setup(struct dsa_switch *ds)
- 		return ret;
- 
- 	/* Setup connection between CPU port & user ports
--	 * Configure specific switch configuration for ports
-+	 * Individual user ports get connected to CPU port only
- 	 */
--	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
--		/* Individual user ports get connected to CPU port only */
--		if (dsa_is_user_port(ds, i)) {
--			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
--					QCA8K_PORT_LOOKUP_MEMBER,
--					BIT(cpu_port));
--			if (ret)
--				return ret;
--
--			ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
--						QCA8K_PORT_LOOKUP_LEARN);
--			if (ret)
--				return ret;
--
--			/* For port based vlans to work we need to set the
--			 * default egress vid
--			 */
--			ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
--					QCA8K_EGREES_VLAN_PORT_MASK(i),
--					QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF));
--			if (ret)
--				return ret;
--
--			ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
--					  QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
--					  QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
--			if (ret)
--				return ret;
--		}
-+	dsa_switch_for_each_user_port(dp, ds) {
-+		u8 port = dp->index;
- 
--		/* The port 5 of the qca8337 have some problem in flood condition. The
--		 * original legacy driver had some specific buffer and priority settings
--		 * for the different port suggested by the QCA switch team. Add this
--		 * missing settings to improve switch stability under load condition.
--		 * This problem is limited to qca8337 and other qca8k switch are not affected.
-+		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
-+				QCA8K_PORT_LOOKUP_MEMBER,
-+				BIT(cpu_port));
-+		if (ret)
-+			return ret;
-+
-+		ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port),
-+					QCA8K_PORT_LOOKUP_LEARN);
-+		if (ret)
-+			return ret;
-+
-+		/* For port based vlans to work we need to set the
-+		 * default egress vid
- 		 */
--		if (priv->switch_id == QCA8K_ID_QCA8337)
--			qca8k_setup_hol_fixup(priv, i);
-+		ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
-+				QCA8K_EGREES_VLAN_PORT_MASK(port),
-+				QCA8K_EGREES_VLAN_PORT(port, QCA8K_PORT_VID_DEF));
-+		if (ret)
-+			return ret;
-+
-+		ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
-+				  QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
-+				  QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
-+		if (ret)
-+			return ret;
- 	}
- 
-+	/* The port 5 of the qca8337 have some problem in flood condition. The
-+	 * original legacy driver had some specific buffer and priority settings
-+	 * for the different port suggested by the QCA switch team. Add this
-+	 * missing settings to improve switch stability under load condition.
-+	 * This problem is limited to qca8337 and other qca8k switch are not affected.
-+	 */
-+	if (priv->switch_id == QCA8K_ID_QCA8337)
-+		dsa_switch_for_each_available_port(dp, ds)
-+			qca8k_setup_hol_fixup(priv, dp->index);
-+
- 	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
- 	if (priv->switch_id == QCA8K_ID_QCA8327) {
- 		mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
diff --git a/target/linux/generic/backport-6.1/781-v6.6-01-net-dsa-qca8k-fix-regmap-bulk-read-write-methods-on-.patch b/target/linux/generic/backport-6.1/781-v6.6-01-net-dsa-qca8k-fix-regmap-bulk-read-write-methods-on-.patch
deleted file mode 100644
index 632f422d1ff7..000000000000
--- a/target/linux/generic/backport-6.1/781-v6.6-01-net-dsa-qca8k-fix-regmap-bulk-read-write-methods-on-.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 5652d1741574eb89cc02576e50ee3e348bd6dd77 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Wed, 4 Oct 2023 11:19:03 +0200
-Subject: [PATCH 1/2] net: dsa: qca8k: fix regmap bulk read/write methods on
- big endian systems
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit c766e077d927 ("net: dsa: qca8k: convert to regmap read/write
-API") introduced bulk read/write methods to qca8k's regmap.
-
-The regmap bulk read/write methods get the register address in a buffer
-passed as a void pointer parameter (the same buffer contains also the
-read/written values). The register address occupies only as many bytes
-as it requires at the beginning of this buffer. For example if the
-.reg_bits member in regmap_config is 16 (as is the case for this
-driver), the register address occupies only the first 2 bytes in this
-buffer, so it can be cast to u16.
-
-But the original commit implementing these bulk read/write methods cast
-the buffer to u32:
-  u32 reg = *(u32 *)reg_buf & U16_MAX;
-taking the first 4 bytes. This works on little endian systems where the
-first 2 bytes of the buffer correspond to the low 16-bits, but it
-obviously cannot work on big endian systems.
-
-Fix this by casting the beginning of the buffer to u16 as
-   u32 reg = *(u16 *)reg_buf;
-
-Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API")
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Tested-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -504,8 +504,8 @@ qca8k_bulk_read(void *ctx, const void *r
- 		void *val_buf, size_t val_len)
- {
- 	int i, count = val_len / sizeof(u32), ret;
--	u32 reg = *(u32 *)reg_buf & U16_MAX;
- 	struct qca8k_priv *priv = ctx;
-+	u32 reg = *(u16 *)reg_buf;
- 
- 	if (priv->mgmt_master &&
- 	    !qca8k_read_eth(priv, reg, val_buf, val_len))
-@@ -526,8 +526,8 @@ qca8k_bulk_gather_write(void *ctx, const
- 			const void *val_buf, size_t val_len)
- {
- 	int i, count = val_len / sizeof(u32), ret;
--	u32 reg = *(u32 *)reg_buf & U16_MAX;
- 	struct qca8k_priv *priv = ctx;
-+	u32 reg = *(u16 *)reg_buf;
- 	u32 *val = (u32 *)val_buf;
- 
- 	if (priv->mgmt_master &&
diff --git a/target/linux/generic/backport-6.1/790-01-v6.2-net-dsa-mt7530-remove-redundant-assignment.patch b/target/linux/generic/backport-6.1/790-01-v6.2-net-dsa-mt7530-remove-redundant-assignment.patch
deleted file mode 100644
index e0319fd355a5..000000000000
--- a/target/linux/generic/backport-6.1/790-01-v6.2-net-dsa-mt7530-remove-redundant-assignment.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 27b692012840f658c84a3102c0aeca2676f03132 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 15 Dec 2022 03:47:59 +0000
-Subject: [PATCH 01/48] net: dsa: mt7530: remove redundant assignment
-
-Russell King correctly pointed out that the MAC_2500FD capability is
-already added for port 5 (if not in RGMII mode) and port 6 (which only
-supports SGMII) by mt7531_mac_port_get_caps. Remove the reduntant
-setting of this capability flag which was added by a previous commit.
-
-Fixes: e19de30d2080 ("net: dsa: mt7530: add support for in-band link status")
-Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/Y5qY7x6la5TxZxzX@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3198,9 +3198,6 @@ static void mt753x_phylink_get_caps(stru
- 	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
- 				   MAC_10 | MAC_100 | MAC_1000FD;
- 
--	if ((priv->id == ID_MT7531) && mt753x_is_mac_port(port))
--		config->mac_capabilities |= MAC_2500FD;
--
- 	/* This driver does not make use of the speed, duplex, pause or the
- 	 * advertisement in its mac_config, so it is safe to mark this driver
- 	 * as non-legacy.
diff --git a/target/linux/generic/backport-6.1/790-02-v6.4-net-dsa-mt7530-use-external-PCS-driver.patch b/target/linux/generic/backport-6.1/790-02-v6.4-net-dsa-mt7530-use-external-PCS-driver.patch
deleted file mode 100644
index 2697f2e56324..000000000000
--- a/target/linux/generic/backport-6.1/790-02-v6.4-net-dsa-mt7530-use-external-PCS-driver.patch
+++ /dev/null
@@ -1,477 +0,0 @@
-From 05dc5ea089f947a69a5db092ef4cad6a0f3c96ce Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:58:43 +0000
-Subject: [PATCH 02/48] net: dsa: mt7530: use external PCS driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Implement regmap access wrappers, for now only to be used by the
-pcs-mtk-lynxi driver.
-Make use of this external PCS driver and drop the now reduntant
-implementation in mt7530.c.
-As a nice side effect the SGMII registers can now also more easily be
-inspected for debugging via /sys/kernel/debug/regmap.
-
-Tested-by: Bjørn Mork <bjorn@mork.no>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/Kconfig  |   1 +
- drivers/net/dsa/mt7530.c | 277 ++++++++++-----------------------------
- drivers/net/dsa/mt7530.h |  47 +------
- 3 files changed, 71 insertions(+), 254 deletions(-)
-
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -37,6 +37,7 @@ config NET_DSA_MT7530
- 	tristate "MediaTek MT753x and MT7621 Ethernet switch support"
- 	select NET_DSA_TAG_MTK
- 	select MEDIATEK_GE_PHY
-+	select PCS_MTK_LYNXI
- 	help
- 	  This enables support for the MediaTek MT7530, MT7531, and MT7621
- 	  Ethernet switch chips.
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -14,6 +14,7 @@
- #include <linux/of_mdio.h>
- #include <linux/of_net.h>
- #include <linux/of_platform.h>
-+#include <linux/pcs/pcs-mtk-lynxi.h>
- #include <linux/phylink.h>
- #include <linux/regmap.h>
- #include <linux/regulator/consumer.h>
-@@ -2839,128 +2840,11 @@ static int mt7531_rgmii_setup(struct mt7
- 	return 0;
- }
- 
--static void mt7531_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
--			       phy_interface_t interface, int speed, int duplex)
--{
--	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
--	int port = pcs_to_mt753x_pcs(pcs)->port;
--	unsigned int val;
--
--	/* For adjusting speed and duplex of SGMII force mode. */
--	if (interface != PHY_INTERFACE_MODE_SGMII ||
--	    phylink_autoneg_inband(mode))
--		return;
--
--	/* SGMII force mode setting */
--	val = mt7530_read(priv, MT7531_SGMII_MODE(port));
--	val &= ~MT7531_SGMII_IF_MODE_MASK;
--
--	switch (speed) {
--	case SPEED_10:
--		val |= MT7531_SGMII_FORCE_SPEED_10;
--		break;
--	case SPEED_100:
--		val |= MT7531_SGMII_FORCE_SPEED_100;
--		break;
--	case SPEED_1000:
--		val |= MT7531_SGMII_FORCE_SPEED_1000;
--		break;
--	}
--
--	/* MT7531 SGMII 1G force mode can only work in full duplex mode,
--	 * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
--	 *
--	 * The speed check is unnecessary as the MAC capabilities apply
--	 * this restriction. --rmk
--	 */
--	if ((speed == SPEED_10 || speed == SPEED_100) &&
--	    duplex != DUPLEX_FULL)
--		val |= MT7531_SGMII_FORCE_HALF_DUPLEX;
--
--	mt7530_write(priv, MT7531_SGMII_MODE(port), val);
--}
--
- static bool mt753x_is_mac_port(u32 port)
- {
- 	return (port == 5 || port == 6);
- }
- 
--static int mt7531_sgmii_setup_mode_force(struct mt7530_priv *priv, u32 port,
--					 phy_interface_t interface)
--{
--	u32 val;
--
--	if (!mt753x_is_mac_port(port))
--		return -EINVAL;
--
--	mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
--		   MT7531_SGMII_PHYA_PWD);
--
--	val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port));
--	val &= ~MT7531_RG_TPHY_SPEED_MASK;
--	/* Setup 2.5 times faster clock for 2.5Gbps data speeds with 10B/8B
--	 * encoding.
--	 */
--	val |= (interface == PHY_INTERFACE_MODE_2500BASEX) ?
--		MT7531_RG_TPHY_SPEED_3_125G : MT7531_RG_TPHY_SPEED_1_25G;
--	mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val);
--
--	mt7530_clear(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE);
--
--	/* MT7531 SGMII 1G and 2.5G force mode can only work in full duplex
--	 * mode, no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
--	 */
--	mt7530_rmw(priv, MT7531_SGMII_MODE(port),
--		   MT7531_SGMII_IF_MODE_MASK | MT7531_SGMII_REMOTE_FAULT_DIS,
--		   MT7531_SGMII_FORCE_SPEED_1000);
--
--	mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0);
--
--	return 0;
--}
--
--static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port,
--				      phy_interface_t interface)
--{
--	if (!mt753x_is_mac_port(port))
--		return -EINVAL;
--
--	mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
--		   MT7531_SGMII_PHYA_PWD);
--
--	mt7530_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port),
--		   MT7531_RG_TPHY_SPEED_MASK, MT7531_RG_TPHY_SPEED_1_25G);
--
--	mt7530_set(priv, MT7531_SGMII_MODE(port),
--		   MT7531_SGMII_REMOTE_FAULT_DIS |
--		   MT7531_SGMII_SPEED_DUPLEX_AN);
--
--	mt7530_rmw(priv, MT7531_PCS_SPEED_ABILITY(port),
--		   MT7531_SGMII_TX_CONFIG_MASK, 1);
--
--	mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE);
--
--	mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_RESTART);
--
--	mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0);
--
--	return 0;
--}
--
--static void mt7531_pcs_an_restart(struct phylink_pcs *pcs)
--{
--	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
--	int port = pcs_to_mt753x_pcs(pcs)->port;
--	u32 val;
--
--	/* Only restart AN when AN is enabled */
--	val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
--	if (val & MT7531_SGMII_AN_ENABLE) {
--		val |= MT7531_SGMII_AN_RESTART;
--		mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val);
--	}
--}
--
- static int
- mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
- 		  phy_interface_t interface)
-@@ -2983,11 +2867,11 @@ mt7531_mac_config(struct dsa_switch *ds,
- 		phydev = dp->slave->phydev;
- 		return mt7531_rgmii_setup(priv, port, interface, phydev);
- 	case PHY_INTERFACE_MODE_SGMII:
--		return mt7531_sgmii_setup_mode_an(priv, port, interface);
- 	case PHY_INTERFACE_MODE_NA:
- 	case PHY_INTERFACE_MODE_1000BASEX:
- 	case PHY_INTERFACE_MODE_2500BASEX:
--		return mt7531_sgmii_setup_mode_force(priv, port, interface);
-+		/* handled in SGMII PCS driver */
-+		return 0;
- 	default:
- 		return -EINVAL;
- 	}
-@@ -3012,11 +2896,11 @@ mt753x_phylink_mac_select_pcs(struct dsa
- 
- 	switch (interface) {
- 	case PHY_INTERFACE_MODE_TRGMII:
-+		return &priv->pcs[port].pcs;
- 	case PHY_INTERFACE_MODE_SGMII:
- 	case PHY_INTERFACE_MODE_1000BASEX:
- 	case PHY_INTERFACE_MODE_2500BASEX:
--		return &priv->pcs[port].pcs;
--
-+		return priv->ports[port].sgmii_pcs;
- 	default:
- 		return NULL;
- 	}
-@@ -3254,86 +3138,6 @@ static void mt7530_pcs_get_state(struct
- 		state->pause |= MLO_PAUSE_TX;
- }
- 
--static int
--mt7531_sgmii_pcs_get_state_an(struct mt7530_priv *priv, int port,
--			      struct phylink_link_state *state)
--{
--	u32 status, val;
--	u16 config_reg;
--
--	status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
--	state->link = !!(status & MT7531_SGMII_LINK_STATUS);
--	state->an_complete = !!(status & MT7531_SGMII_AN_COMPLETE);
--	if (state->interface == PHY_INTERFACE_MODE_SGMII &&
--	    (status & MT7531_SGMII_AN_ENABLE)) {
--		val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port));
--		config_reg = val >> 16;
--
--		switch (config_reg & LPA_SGMII_SPD_MASK) {
--		case LPA_SGMII_1000:
--			state->speed = SPEED_1000;
--			break;
--		case LPA_SGMII_100:
--			state->speed = SPEED_100;
--			break;
--		case LPA_SGMII_10:
--			state->speed = SPEED_10;
--			break;
--		default:
--			dev_err(priv->dev, "invalid sgmii PHY speed\n");
--			state->link = false;
--			return -EINVAL;
--		}
--
--		if (config_reg & LPA_SGMII_FULL_DUPLEX)
--			state->duplex = DUPLEX_FULL;
--		else
--			state->duplex = DUPLEX_HALF;
--	}
--
--	return 0;
--}
--
--static void
--mt7531_sgmii_pcs_get_state_inband(struct mt7530_priv *priv, int port,
--				  struct phylink_link_state *state)
--{
--	unsigned int val;
--
--	val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
--	state->link = !!(val & MT7531_SGMII_LINK_STATUS);
--	if (!state->link)
--		return;
--
--	state->an_complete = state->link;
--
--	if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
--		state->speed = SPEED_2500;
--	else
--		state->speed = SPEED_1000;
--
--	state->duplex = DUPLEX_FULL;
--	state->pause = MLO_PAUSE_NONE;
--}
--
--static void mt7531_pcs_get_state(struct phylink_pcs *pcs,
--				 struct phylink_link_state *state)
--{
--	struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
--	int port = pcs_to_mt753x_pcs(pcs)->port;
--
--	if (state->interface == PHY_INTERFACE_MODE_SGMII) {
--		mt7531_sgmii_pcs_get_state_an(priv, port, state);
--		return;
--	} else if ((state->interface == PHY_INTERFACE_MODE_1000BASEX) ||
--		   (state->interface == PHY_INTERFACE_MODE_2500BASEX)) {
--		mt7531_sgmii_pcs_get_state_inband(priv, port, state);
--		return;
--	}
--
--	state->link = false;
--}
--
- static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
- 			     phy_interface_t interface,
- 			     const unsigned long *advertising,
-@@ -3353,18 +3157,57 @@ static const struct phylink_pcs_ops mt75
- 	.pcs_an_restart = mt7530_pcs_an_restart,
- };
- 
--static const struct phylink_pcs_ops mt7531_pcs_ops = {
--	.pcs_validate = mt753x_pcs_validate,
--	.pcs_get_state = mt7531_pcs_get_state,
--	.pcs_config = mt753x_pcs_config,
--	.pcs_an_restart = mt7531_pcs_an_restart,
--	.pcs_link_up = mt7531_pcs_link_up,
-+static int mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
-+{
-+	struct mt7530_priv *priv = context;
-+
-+	*val = mt7530_read(priv, reg);
-+	return 0;
-+};
-+
-+static int mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
-+{
-+	struct mt7530_priv *priv = context;
-+
-+	mt7530_write(priv, reg, val);
-+	return 0;
-+};
-+
-+static int mt7530_regmap_update_bits(void *context, unsigned int reg,
-+				     unsigned int mask, unsigned int val)
-+{
-+	struct mt7530_priv *priv = context;
-+
-+	mt7530_rmw(priv, reg, mask, val);
-+	return 0;
-+};
-+
-+static const struct regmap_bus mt7531_regmap_bus = {
-+	.reg_write = mt7530_regmap_write,
-+	.reg_read = mt7530_regmap_read,
-+	.reg_update_bits = mt7530_regmap_update_bits,
-+};
-+
-+#define MT7531_PCS_REGMAP_CONFIG(_name, _reg_base) \
-+	{				\
-+		.name = _name,		\
-+		.reg_bits = 16,		\
-+		.val_bits = 32,		\
-+		.reg_stride = 4,	\
-+		.reg_base = _reg_base,	\
-+		.max_register = 0x17c,	\
-+	}
-+
-+static const struct regmap_config mt7531_pcs_config[] = {
-+	MT7531_PCS_REGMAP_CONFIG("port5", MT7531_SGMII_REG_BASE(5)),
-+	MT7531_PCS_REGMAP_CONFIG("port6", MT7531_SGMII_REG_BASE(6)),
- };
- 
- static int
- mt753x_setup(struct dsa_switch *ds)
- {
- 	struct mt7530_priv *priv = ds->priv;
-+	struct regmap *regmap;
- 	int i, ret;
- 
- 	/* Initialise the PCS devices */
-@@ -3372,8 +3215,6 @@ mt753x_setup(struct dsa_switch *ds)
- 		priv->pcs[i].pcs.ops = priv->info->pcs_ops;
- 		priv->pcs[i].priv = priv;
- 		priv->pcs[i].port = i;
--		if (mt753x_is_mac_port(i))
--			priv->pcs[i].pcs.poll = 1;
- 	}
- 
- 	ret = priv->info->sw_setup(ds);
-@@ -3388,6 +3229,16 @@ mt753x_setup(struct dsa_switch *ds)
- 	if (ret && priv->irq)
- 		mt7530_free_irq_common(priv);
- 
-+	if (priv->id == ID_MT7531)
-+		for (i = 0; i < 2; i++) {
-+			regmap = devm_regmap_init(ds->dev,
-+						  &mt7531_regmap_bus, priv,
-+						  &mt7531_pcs_config[i]);
-+			priv->ports[5 + i].sgmii_pcs =
-+				mtk_pcs_lynxi_create(ds->dev, regmap,
-+						     MT7531_PHYA_CTRL_SIGNAL3, 0);
-+		}
-+
- 	return ret;
- }
- 
-@@ -3480,7 +3331,7 @@ static const struct mt753x_info mt753x_t
- 	},
- 	[ID_MT7531] = {
- 		.id = ID_MT7531,
--		.pcs_ops = &mt7531_pcs_ops,
-+		.pcs_ops = &mt7530_pcs_ops,
- 		.sw_setup = mt7531_setup,
- 		.phy_read = mt7531_ind_phy_read,
- 		.phy_write = mt7531_ind_phy_write,
-@@ -3588,7 +3439,7 @@ static void
- mt7530_remove(struct mdio_device *mdiodev)
- {
- 	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
--	int ret = 0;
-+	int ret = 0, i;
- 
- 	if (!priv)
- 		return;
-@@ -3607,6 +3458,10 @@ mt7530_remove(struct mdio_device *mdiode
- 		mt7530_free_irq(priv);
- 
- 	dsa_unregister_switch(priv->ds);
-+
-+	for (i = 0; i < 2; ++i)
-+		mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
-+
- 	mutex_destroy(&priv->reg_mutex);
- }
- 
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -401,47 +401,8 @@ enum mt7530_vlan_port_acc_frm {
- 					 CCR_TX_OCT_CNT_BAD)
- 
- /* MT7531 SGMII register group */
--#define MT7531_SGMII_REG_BASE		0x5000
--#define MT7531_SGMII_REG(p, r)		(MT7531_SGMII_REG_BASE + \
--					((p) - 5) * 0x1000 + (r))
--
--/* Register forSGMII PCS_CONTROL_1 */
--#define MT7531_PCS_CONTROL_1(p)		MT7531_SGMII_REG(p, 0x00)
--#define  MT7531_SGMII_LINK_STATUS	BIT(18)
--#define  MT7531_SGMII_AN_ENABLE		BIT(12)
--#define  MT7531_SGMII_AN_RESTART	BIT(9)
--#define  MT7531_SGMII_AN_COMPLETE	BIT(21)
--
--/* Register for SGMII PCS_SPPED_ABILITY */
--#define MT7531_PCS_SPEED_ABILITY(p)	MT7531_SGMII_REG(p, 0x08)
--#define  MT7531_SGMII_TX_CONFIG_MASK	GENMASK(15, 0)
--#define  MT7531_SGMII_TX_CONFIG		BIT(0)
--
--/* Register for SGMII_MODE */
--#define MT7531_SGMII_MODE(p)		MT7531_SGMII_REG(p, 0x20)
--#define  MT7531_SGMII_REMOTE_FAULT_DIS	BIT(8)
--#define  MT7531_SGMII_IF_MODE_MASK	GENMASK(5, 1)
--#define  MT7531_SGMII_FORCE_DUPLEX	BIT(4)
--#define  MT7531_SGMII_FORCE_SPEED_MASK	GENMASK(3, 2)
--#define  MT7531_SGMII_FORCE_SPEED_1000	BIT(3)
--#define  MT7531_SGMII_FORCE_SPEED_100	BIT(2)
--#define  MT7531_SGMII_FORCE_SPEED_10	0
--#define  MT7531_SGMII_SPEED_DUPLEX_AN	BIT(1)
--
--enum mt7531_sgmii_force_duplex {
--	MT7531_SGMII_FORCE_FULL_DUPLEX = 0,
--	MT7531_SGMII_FORCE_HALF_DUPLEX = 0x10,
--};
--
--/* Fields of QPHY_PWR_STATE_CTRL */
--#define MT7531_QPHY_PWR_STATE_CTRL(p)	MT7531_SGMII_REG(p, 0xe8)
--#define  MT7531_SGMII_PHYA_PWD		BIT(4)
--
--/* Values of SGMII SPEED */
--#define MT7531_PHYA_CTRL_SIGNAL3(p)	MT7531_SGMII_REG(p, 0x128)
--#define  MT7531_RG_TPHY_SPEED_MASK	(BIT(2) | BIT(3))
--#define  MT7531_RG_TPHY_SPEED_1_25G	0x0
--#define  MT7531_RG_TPHY_SPEED_3_125G	BIT(2)
-+#define MT7531_SGMII_REG_BASE(p)	(0x5000 + ((p) - 5) * 0x1000)
-+#define MT7531_PHYA_CTRL_SIGNAL3	0x128
- 
- /* Register for system reset */
- #define MT7530_SYS_CTRL			0x7000
-@@ -741,13 +702,13 @@ struct mt7530_fdb {
-  * @pm:		The matrix used to show all connections with the port.
-  * @pvid:	The VLAN specified is to be considered a PVID at ingress.  Any
-  *		untagged frames will be assigned to the related VLAN.
-- * @vlan_filtering: The flags indicating whether the port that can recognize
-- *		    VLAN-tagged frames.
-+ * @sgmii_pcs:	Pointer to PCS instance for SerDes ports
-  */
- struct mt7530_port {
- 	bool enable;
- 	u32 pm;
- 	u16 pvid;
-+	struct phylink_pcs *sgmii_pcs;
- };
- 
- /* Port 5 interface select definitions */
diff --git a/target/linux/generic/backport-6.1/790-03-v6.4-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch b/target/linux/generic/backport-6.1/790-03-v6.4-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch
deleted file mode 100644
index d8f559b41626..000000000000
--- a/target/linux/generic/backport-6.1/790-03-v6.4-net-dsa-mt7530-make-some-noise-if-register-read-fail.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From cafbb70e148e7a4e318dcc1e36a96643815b6245 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:17:19 +0100
-Subject: [PATCH 03/48] net: dsa: mt7530: make some noise if register read
- fails
-
-Simply returning the negative error value instead of the read value
-doesn't seem like a good idea. Return 0 instead and add WARN_ON_ONCE(1)
-so this kind of error will not go unnoticed.
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -224,9 +224,10 @@ mt7530_mii_read(struct mt7530_priv *priv
- 	/* MT7530 uses 31 as the pseudo port */
- 	ret = bus->write(bus, 0x1f, 0x1f, page);
- 	if (ret < 0) {
-+		WARN_ON_ONCE(1);
- 		dev_err(&bus->dev,
- 			"failed to read mt7530 register\n");
--		return ret;
-+		return 0;
- 	}
- 
- 	lo = bus->read(bus, 0x1f, r);
diff --git a/target/linux/generic/backport-6.1/790-04-v6.4-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch b/target/linux/generic/backport-6.1/790-04-v6.4-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch
deleted file mode 100644
index 1bf19a813e6e..000000000000
--- a/target/linux/generic/backport-6.1/790-04-v6.4-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From 8f83ad87e2df26ddf9b8afd4d2873644a872d929 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:17:30 +0100
-Subject: [PATCH 04/48] net: dsa: mt7530: refactor SGMII PCS creation
-
-Instead of macro templates use a dedidated function and allocated
-regmap_config when creating the regmaps for the pcs-mtk-lynxi
-instances.
-This is in preparation to switching to use unlocked regmap accessors
-and have regmap's locking API handle locking for us.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 74 +++++++++++++++++++++++++++-------------
- 1 file changed, 50 insertions(+), 24 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3189,26 +3189,56 @@ static const struct regmap_bus mt7531_re
- 	.reg_update_bits = mt7530_regmap_update_bits,
- };
- 
--#define MT7531_PCS_REGMAP_CONFIG(_name, _reg_base) \
--	{				\
--		.name = _name,		\
--		.reg_bits = 16,		\
--		.val_bits = 32,		\
--		.reg_stride = 4,	\
--		.reg_base = _reg_base,	\
--		.max_register = 0x17c,	\
-+static int
-+mt7531_create_sgmii(struct mt7530_priv *priv)
-+{
-+	struct regmap_config *mt7531_pcs_config[2];
-+	struct phylink_pcs *pcs;
-+	struct regmap *regmap;
-+	int i, ret = 0;
-+
-+	for (i = 0; i < 2; i++) {
-+		mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
-+						    sizeof(struct regmap_config),
-+						    GFP_KERNEL);
-+		if (!mt7531_pcs_config[i]) {
-+			ret = -ENOMEM;
-+			break;
-+		}
-+
-+		mt7531_pcs_config[i]->name = i ? "port6" : "port5";
-+		mt7531_pcs_config[i]->reg_bits = 16;
-+		mt7531_pcs_config[i]->val_bits = 32;
-+		mt7531_pcs_config[i]->reg_stride = 4;
-+		mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
-+		mt7531_pcs_config[i]->max_register = 0x17c;
-+
-+		regmap = devm_regmap_init(priv->dev,
-+					  &mt7531_regmap_bus, priv,
-+					  mt7531_pcs_config[i]);
-+		if (IS_ERR(regmap)) {
-+			ret = PTR_ERR(regmap);
-+			break;
-+		}
-+		pcs = mtk_pcs_lynxi_create(priv->dev, regmap,
-+					   MT7531_PHYA_CTRL_SIGNAL3, 0);
-+		if (!pcs) {
-+			ret = -ENXIO;
-+			break;
-+		}
-+		priv->ports[5 + i].sgmii_pcs = pcs;
- 	}
- 
--static const struct regmap_config mt7531_pcs_config[] = {
--	MT7531_PCS_REGMAP_CONFIG("port5", MT7531_SGMII_REG_BASE(5)),
--	MT7531_PCS_REGMAP_CONFIG("port6", MT7531_SGMII_REG_BASE(6)),
--};
-+	if (ret && i)
-+		mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs);
-+
-+	return ret;
-+}
- 
- static int
- mt753x_setup(struct dsa_switch *ds)
- {
- 	struct mt7530_priv *priv = ds->priv;
--	struct regmap *regmap;
- 	int i, ret;
- 
- 	/* Initialise the PCS devices */
-@@ -3230,15 +3260,11 @@ mt753x_setup(struct dsa_switch *ds)
- 	if (ret && priv->irq)
- 		mt7530_free_irq_common(priv);
- 
--	if (priv->id == ID_MT7531)
--		for (i = 0; i < 2; i++) {
--			regmap = devm_regmap_init(ds->dev,
--						  &mt7531_regmap_bus, priv,
--						  &mt7531_pcs_config[i]);
--			priv->ports[5 + i].sgmii_pcs =
--				mtk_pcs_lynxi_create(ds->dev, regmap,
--						     MT7531_PHYA_CTRL_SIGNAL3, 0);
--		}
-+	if (priv->id == ID_MT7531) {
-+		ret = mt7531_create_sgmii(priv);
-+		if (ret && priv->irq)
-+			mt7530_free_irq_common(priv);
-+	}
- 
- 	return ret;
- }
diff --git a/target/linux/generic/backport-6.1/790-05-v6.4-net-dsa-mt7530-use-unlocked-regmap-accessors.patch b/target/linux/generic/backport-6.1/790-05-v6.4-net-dsa-mt7530-use-unlocked-regmap-accessors.patch
deleted file mode 100644
index bd28b4be76ab..000000000000
--- a/target/linux/generic/backport-6.1/790-05-v6.4-net-dsa-mt7530-use-unlocked-regmap-accessors.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From efb41b8e9b7bbb08ace1930373bff63d4f5cc6e2 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:17:40 +0100
-Subject: [PATCH 05/48] net: dsa: mt7530: use unlocked regmap accessors
-
-Instead of wrapping the locked register accessor functions, use the
-unlocked variants and add locking wrapper functions to let regmap
-handle the locking.
-
-This is a preparation towards being able to always use regmap to
-access switch registers instead of open-coded accessor functions.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 23 ++++++++++++++---------
- 1 file changed, 14 insertions(+), 9 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3162,7 +3162,7 @@ static int mt7530_regmap_read(void *cont
- {
- 	struct mt7530_priv *priv = context;
- 
--	*val = mt7530_read(priv, reg);
-+	*val = mt7530_mii_read(priv, reg);
- 	return 0;
- };
- 
-@@ -3170,23 +3170,25 @@ static int mt7530_regmap_write(void *con
- {
- 	struct mt7530_priv *priv = context;
- 
--	mt7530_write(priv, reg, val);
-+	mt7530_mii_write(priv, reg, val);
- 	return 0;
- };
- 
--static int mt7530_regmap_update_bits(void *context, unsigned int reg,
--				     unsigned int mask, unsigned int val)
-+static void
-+mt7530_mdio_regmap_lock(void *mdio_lock)
- {
--	struct mt7530_priv *priv = context;
-+	mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED);
-+}
- 
--	mt7530_rmw(priv, reg, mask, val);
--	return 0;
--};
-+static void
-+mt7530_mdio_regmap_unlock(void *mdio_lock)
-+{
-+	mutex_unlock(mdio_lock);
-+}
- 
- static const struct regmap_bus mt7531_regmap_bus = {
- 	.reg_write = mt7530_regmap_write,
- 	.reg_read = mt7530_regmap_read,
--	.reg_update_bits = mt7530_regmap_update_bits,
- };
- 
- static int
-@@ -3212,6 +3214,9 @@ mt7531_create_sgmii(struct mt7530_priv *
- 		mt7531_pcs_config[i]->reg_stride = 4;
- 		mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
- 		mt7531_pcs_config[i]->max_register = 0x17c;
-+		mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock;
-+		mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
-+		mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
- 
- 		regmap = devm_regmap_init(priv->dev,
- 					  &mt7531_regmap_bus, priv,
diff --git a/target/linux/generic/backport-6.1/790-06-v6.4-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch b/target/linux/generic/backport-6.1/790-06-v6.4-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch
deleted file mode 100644
index 42c225d91cb1..000000000000
--- a/target/linux/generic/backport-6.1/790-06-v6.4-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch
+++ /dev/null
@@ -1,224 +0,0 @@
-From c7945d11a060797c31b3f47d9c9e515b0bf2082f Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:17:52 +0100
-Subject: [PATCH 06/48] net: dsa: mt7530: use regmap to access switch register
- space
-
-Use regmap API to access the switch register space.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 99 ++++++++++++++++++++++++----------------
- drivers/net/dsa/mt7530.h |  2 +
- 2 files changed, 62 insertions(+), 39 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -183,9 +183,9 @@ core_clear(struct mt7530_priv *priv, u32
- }
- 
- static int
--mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
-+mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
- {
--	struct mii_bus *bus = priv->bus;
-+	struct mii_bus *bus = context;
- 	u16 page, r, lo, hi;
- 	int ret;
- 
-@@ -197,24 +197,34 @@ mt7530_mii_write(struct mt7530_priv *pri
- 	/* MT7530 uses 31 as the pseudo port */
- 	ret = bus->write(bus, 0x1f, 0x1f, page);
- 	if (ret < 0)
--		goto err;
-+		return ret;
- 
- 	ret = bus->write(bus, 0x1f, r,  lo);
- 	if (ret < 0)
--		goto err;
-+		return ret;
- 
- 	ret = bus->write(bus, 0x1f, 0x10, hi);
--err:
-+	return ret;
-+}
-+
-+static int
-+mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
-+{
-+	int ret;
-+
-+	ret = regmap_write(priv->regmap, reg, val);
-+
- 	if (ret < 0)
--		dev_err(&bus->dev,
-+		dev_err(priv->dev,
- 			"failed to write mt7530 register\n");
-+
- 	return ret;
- }
- 
--static u32
--mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
-+static int
-+mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
- {
--	struct mii_bus *bus = priv->bus;
-+	struct mii_bus *bus = context;
- 	u16 page, r, lo, hi;
- 	int ret;
- 
-@@ -223,17 +233,32 @@ mt7530_mii_read(struct mt7530_priv *priv
- 
- 	/* MT7530 uses 31 as the pseudo port */
- 	ret = bus->write(bus, 0x1f, 0x1f, page);
--	if (ret < 0) {
-+	if (ret < 0)
-+		return ret;
-+
-+	lo = bus->read(bus, 0x1f, r);
-+	hi = bus->read(bus, 0x1f, 0x10);
-+
-+	*val = (hi << 16) | (lo & 0xffff);
-+
-+	return 0;
-+}
-+
-+static u32
-+mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
-+{
-+	int ret;
-+	u32 val;
-+
-+	ret = regmap_read(priv->regmap, reg, &val);
-+	if (ret) {
- 		WARN_ON_ONCE(1);
--		dev_err(&bus->dev,
-+		dev_err(priv->dev,
- 			"failed to read mt7530 register\n");
- 		return 0;
- 	}
- 
--	lo = bus->read(bus, 0x1f, r);
--	hi = bus->read(bus, 0x1f, 0x10);
--
--	return (hi << 16) | (lo & 0xffff);
-+	return val;
- }
- 
- static void
-@@ -283,14 +308,10 @@ mt7530_rmw(struct mt7530_priv *priv, u32
- 	   u32 mask, u32 set)
- {
- 	struct mii_bus *bus = priv->bus;
--	u32 val;
- 
- 	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
- 
--	val = mt7530_mii_read(priv, reg);
--	val &= ~mask;
--	val |= set;
--	mt7530_mii_write(priv, reg, val);
-+	regmap_update_bits(priv->regmap, reg, mask, set);
- 
- 	mutex_unlock(&bus->mdio_lock);
- }
-@@ -298,7 +319,7 @@ mt7530_rmw(struct mt7530_priv *priv, u32
- static void
- mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val)
- {
--	mt7530_rmw(priv, reg, 0, val);
-+	mt7530_rmw(priv, reg, val, val);
- }
- 
- static void
-@@ -3158,22 +3179,6 @@ static const struct phylink_pcs_ops mt75
- 	.pcs_an_restart = mt7530_pcs_an_restart,
- };
- 
--static int mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
--{
--	struct mt7530_priv *priv = context;
--
--	*val = mt7530_mii_read(priv, reg);
--	return 0;
--};
--
--static int mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
--{
--	struct mt7530_priv *priv = context;
--
--	mt7530_mii_write(priv, reg, val);
--	return 0;
--};
--
- static void
- mt7530_mdio_regmap_lock(void *mdio_lock)
- {
-@@ -3186,7 +3191,7 @@ mt7530_mdio_regmap_unlock(void *mdio_loc
- 	mutex_unlock(mdio_lock);
- }
- 
--static const struct regmap_bus mt7531_regmap_bus = {
-+static const struct regmap_bus mt7530_regmap_bus = {
- 	.reg_write = mt7530_regmap_write,
- 	.reg_read = mt7530_regmap_read,
- };
-@@ -3219,7 +3224,7 @@ mt7531_create_sgmii(struct mt7530_priv *
- 		mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
- 
- 		regmap = devm_regmap_init(priv->dev,
--					  &mt7531_regmap_bus, priv,
-+					  &mt7530_regmap_bus, priv->bus,
- 					  mt7531_pcs_config[i]);
- 		if (IS_ERR(regmap)) {
- 			ret = PTR_ERR(regmap);
-@@ -3385,6 +3390,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match)
- static int
- mt7530_probe(struct mdio_device *mdiodev)
- {
-+	static struct regmap_config *regmap_config;
- 	struct mt7530_priv *priv;
- 	struct device_node *dn;
- 
-@@ -3464,6 +3470,21 @@ mt7530_probe(struct mdio_device *mdiodev
- 	mutex_init(&priv->reg_mutex);
- 	dev_set_drvdata(&mdiodev->dev, priv);
- 
-+	regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
-+				     GFP_KERNEL);
-+	if (!regmap_config)
-+		return -ENOMEM;
-+
-+	regmap_config->reg_bits = 16;
-+	regmap_config->val_bits = 32;
-+	regmap_config->reg_stride = 4;
-+	regmap_config->max_register = MT7530_CREV;
-+	regmap_config->disable_locking = true;
-+	priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
-+					priv->bus, regmap_config);
-+	if (IS_ERR(priv->regmap))
-+		return PTR_ERR(priv->regmap);
-+
- 	return dsa_register_switch(priv->ds);
- }
- 
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -785,6 +785,7 @@ struct mt753x_info {
-  * @dev:		The device pointer
-  * @ds:			The pointer to the dsa core structure
-  * @bus:		The bus used for the device and built-in PHY
-+ * @regmap:		The regmap instance representing all switch registers
-  * @rstc:		The pointer to reset control used by MCM
-  * @core_pwr:		The power supplied into the core
-  * @io_pwr:		The power supplied into the I/O
-@@ -805,6 +806,7 @@ struct mt7530_priv {
- 	struct device		*dev;
- 	struct dsa_switch	*ds;
- 	struct mii_bus		*bus;
-+	struct regmap		*regmap;
- 	struct reset_control	*rstc;
- 	struct regulator	*core_pwr;
- 	struct regulator	*io_pwr;
diff --git a/target/linux/generic/backport-6.1/790-07-v6.4-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch b/target/linux/generic/backport-6.1/790-07-v6.4-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch
deleted file mode 100644
index 9cd817c05680..000000000000
--- a/target/linux/generic/backport-6.1/790-07-v6.4-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 6b64b5bc3045a7e1ee5278df4f4ff315cd43d88a Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:18:04 +0100
-Subject: [PATCH 07/48] net: dsa: mt7530: move SGMII PCS creation to
- mt7530_probe function
-
-Move creating the SGMII PCS from mt753x_setup() to the more appropriate
-mt7530_probe() function.
-This is done also in preparation of moving all functions related to
-MDIO-connected MT753x switches to a separate module.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 13 +++++++------
- 1 file changed, 7 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3270,12 +3270,6 @@ mt753x_setup(struct dsa_switch *ds)
- 	if (ret && priv->irq)
- 		mt7530_free_irq_common(priv);
- 
--	if (priv->id == ID_MT7531) {
--		ret = mt7531_create_sgmii(priv);
--		if (ret && priv->irq)
--			mt7530_free_irq_common(priv);
--	}
--
- 	return ret;
- }
- 
-@@ -3393,6 +3387,7 @@ mt7530_probe(struct mdio_device *mdiodev
- 	static struct regmap_config *regmap_config;
- 	struct mt7530_priv *priv;
- 	struct device_node *dn;
-+	int ret;
- 
- 	dn = mdiodev->dev.of_node;
- 
-@@ -3485,6 +3480,12 @@ mt7530_probe(struct mdio_device *mdiodev
- 	if (IS_ERR(priv->regmap))
- 		return PTR_ERR(priv->regmap);
- 
-+	if (priv->id == ID_MT7531) {
-+		ret = mt7531_create_sgmii(priv);
-+		if (ret)
-+			return ret;
-+	}
-+
- 	return dsa_register_switch(priv->ds);
- }
- 
diff --git a/target/linux/generic/backport-6.1/790-08-v6.4-net-dsa-mt7530-introduce-mutex-helpers.patch b/target/linux/generic/backport-6.1/790-08-v6.4-net-dsa-mt7530-introduce-mutex-helpers.patch
deleted file mode 100644
index 4f77078eef96..000000000000
--- a/target/linux/generic/backport-6.1/790-08-v6.4-net-dsa-mt7530-introduce-mutex-helpers.patch
+++ /dev/null
@@ -1,273 +0,0 @@
-From 504d39cbda402df3e6fd123d040520393b6a6297 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:18:16 +0100
-Subject: [PATCH 08/48] net: dsa: mt7530: introduce mutex helpers
-
-As the MDIO bus lock only needs to be involved if actually operating
-on an MDIO-connected switch we will need to skip locking for built-in
-switches which are accessed via MMIO.
-Create helper functions which simplify that upcoming change.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 73 ++++++++++++++++++++--------------------
- 1 file changed, 36 insertions(+), 37 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -143,31 +143,40 @@ err:
- }
- 
- static void
--core_write(struct mt7530_priv *priv, u32 reg, u32 val)
-+mt7530_mutex_lock(struct mt7530_priv *priv)
- {
--	struct mii_bus *bus = priv->bus;
-+	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+}
- 
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+static void
-+mt7530_mutex_unlock(struct mt7530_priv *priv)
-+{
-+	mutex_unlock(&priv->bus->mdio_lock);
-+}
-+
-+static void
-+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
-+{
-+	mt7530_mutex_lock(priv);
- 
- 	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
- 
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- }
- 
- static void
- core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
- {
--	struct mii_bus *bus = priv->bus;
- 	u32 val;
- 
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- 
- 	val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
- 	val &= ~mask;
- 	val |= set;
- 	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
- 
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- }
- 
- static void
-@@ -264,13 +273,11 @@ mt7530_mii_read(struct mt7530_priv *priv
- static void
- mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
- {
--	struct mii_bus *bus = priv->bus;
--
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- 
- 	mt7530_mii_write(priv, reg, val);
- 
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- }
- 
- static u32
-@@ -282,14 +289,13 @@ _mt7530_unlocked_read(struct mt7530_dumm
- static u32
- _mt7530_read(struct mt7530_dummy_poll *p)
- {
--	struct mii_bus		*bus = p->priv->bus;
- 	u32 val;
- 
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(p->priv);
- 
- 	val = mt7530_mii_read(p->priv, p->reg);
- 
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(p->priv);
- 
- 	return val;
- }
-@@ -307,13 +313,11 @@ static void
- mt7530_rmw(struct mt7530_priv *priv, u32 reg,
- 	   u32 mask, u32 set)
- {
--	struct mii_bus *bus = priv->bus;
--
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- 
- 	regmap_update_bits(priv->regmap, reg, mask, set);
- 
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- }
- 
- static void
-@@ -659,14 +663,13 @@ static int
- mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
- 			int regnum)
- {
--	struct mii_bus *bus = priv->bus;
- 	struct mt7530_dummy_poll p;
- 	u32 reg, val;
- 	int ret;
- 
- 	INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- 
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- 
- 	ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
- 				 !(val & MT7531_PHY_ACS_ST), 20, 100000);
-@@ -699,7 +702,7 @@ mt7531_ind_c45_phy_read(struct mt7530_pr
- 
- 	ret = val & MT7531_MDIO_RW_DATA_MASK;
- out:
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- 
- 	return ret;
- }
-@@ -708,14 +711,13 @@ static int
- mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
- 			 int regnum, u32 data)
- {
--	struct mii_bus *bus = priv->bus;
- 	struct mt7530_dummy_poll p;
- 	u32 val, reg;
- 	int ret;
- 
- 	INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- 
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- 
- 	ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
- 				 !(val & MT7531_PHY_ACS_ST), 20, 100000);
-@@ -747,7 +749,7 @@ mt7531_ind_c45_phy_write(struct mt7530_p
- 	}
- 
- out:
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- 
- 	return ret;
- }
-@@ -755,14 +757,13 @@ out:
- static int
- mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
- {
--	struct mii_bus *bus = priv->bus;
- 	struct mt7530_dummy_poll p;
- 	int ret;
- 	u32 val;
- 
- 	INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- 
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- 
- 	ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
- 				 !(val & MT7531_PHY_ACS_ST), 20, 100000);
-@@ -785,7 +786,7 @@ mt7531_ind_c22_phy_read(struct mt7530_pr
- 
- 	ret = val & MT7531_MDIO_RW_DATA_MASK;
- out:
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- 
- 	return ret;
- }
-@@ -794,14 +795,13 @@ static int
- mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
- 			 u16 data)
- {
--	struct mii_bus *bus = priv->bus;
- 	struct mt7530_dummy_poll p;
- 	int ret;
- 	u32 reg;
- 
- 	INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
- 
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- 
- 	ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
- 				 !(reg & MT7531_PHY_ACS_ST), 20, 100000);
-@@ -823,7 +823,7 @@ mt7531_ind_c22_phy_write(struct mt7530_p
- 	}
- 
- out:
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- 
- 	return ret;
- }
-@@ -1343,7 +1343,6 @@ static int
- mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
- {
- 	struct mt7530_priv *priv = ds->priv;
--	struct mii_bus *bus = priv->bus;
- 	int length;
- 	u32 val;
- 
-@@ -1354,7 +1353,7 @@ mt7530_port_change_mtu(struct dsa_switch
- 	if (!dsa_is_cpu_port(ds, port))
- 		return 0;
- 
--	mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- 
- 	val = mt7530_mii_read(priv, MT7530_GMACCR);
- 	val &= ~MAX_RX_PKT_LEN_MASK;
-@@ -1375,7 +1374,7 @@ mt7530_port_change_mtu(struct dsa_switch
- 
- 	mt7530_mii_write(priv, MT7530_GMACCR, val);
- 
--	mutex_unlock(&bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- 
- 	return 0;
- }
-@@ -2176,10 +2175,10 @@ mt7530_irq_thread_fn(int irq, void *dev_
- 	u32 val;
- 	int p;
- 
--	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- 	val = mt7530_mii_read(priv, MT7530_SYS_INT_STS);
- 	mt7530_mii_write(priv, MT7530_SYS_INT_STS, val);
--	mutex_unlock(&priv->bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- 
- 	for (p = 0; p < MT7530_NUM_PHYS; p++) {
- 		if (BIT(p) & val) {
-@@ -2215,7 +2214,7 @@ mt7530_irq_bus_lock(struct irq_data *d)
- {
- 	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
- 
--	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	mt7530_mutex_lock(priv);
- }
- 
- static void
-@@ -2224,7 +2223,7 @@ mt7530_irq_bus_sync_unlock(struct irq_da
- 	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
- 
- 	mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
--	mutex_unlock(&priv->bus->mdio_lock);
-+	mt7530_mutex_unlock(priv);
- }
- 
- static struct irq_chip mt7530_irq_chip = {
diff --git a/target/linux/generic/backport-6.1/790-09-v6.4-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch b/target/linux/generic/backport-6.1/790-09-v6.4-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch
deleted file mode 100644
index 9cb0b2dd61e1..000000000000
--- a/target/linux/generic/backport-6.1/790-09-v6.4-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From dbef24b66807eef7498740fa8b8441bee64a96c4 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:18:28 +0100
-Subject: [PATCH 09/48] net: dsa: mt7530: move p5_intf_modes() function to
- mt7530.c
-
-In preparation of splitting mt7530.c into a driver for MDIO-connected
-as well as MDIO-accessed built-in switches on one hand and MMIO-accessed
-built-in switches move the p5_inft_modes() function from mt7530.h to
-mt7530.c. The function is only needed there and will trigger a compiler
-warning about a defined but unused function otherwise when including
-mt7530.h in the to-be-introduced bus-specific drivers.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 18 ++++++++++++++++++
- drivers/net/dsa/mt7530.h | 18 ------------------
- 2 files changed, 18 insertions(+), 18 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -964,6 +964,24 @@ mt7530_set_ageing_time(struct dsa_switch
- 	return 0;
- }
- 
-+static const char *p5_intf_modes(unsigned int p5_interface)
-+{
-+	switch (p5_interface) {
-+	case P5_DISABLED:
-+		return "DISABLED";
-+	case P5_INTF_SEL_PHY_P0:
-+		return "PHY P0";
-+	case P5_INTF_SEL_PHY_P4:
-+		return "PHY P4";
-+	case P5_INTF_SEL_GMAC5:
-+		return "GMAC5";
-+	case P5_INTF_SEL_GMAC5_SGMII:
-+		return "GMAC5_SGMII";
-+	default:
-+		return "unknown";
-+	}
-+}
-+
- static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
- {
- 	struct mt7530_priv *priv = ds->priv;
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -720,24 +720,6 @@ enum p5_interface_select {
- 	P5_INTF_SEL_GMAC5_SGMII,
- };
- 
--static const char *p5_intf_modes(unsigned int p5_interface)
--{
--	switch (p5_interface) {
--	case P5_DISABLED:
--		return "DISABLED";
--	case P5_INTF_SEL_PHY_P0:
--		return "PHY P0";
--	case P5_INTF_SEL_PHY_P4:
--		return "PHY P4";
--	case P5_INTF_SEL_GMAC5:
--		return "GMAC5";
--	case P5_INTF_SEL_GMAC5_SGMII:
--		return "GMAC5_SGMII";
--	default:
--		return "unknown";
--	}
--}
--
- struct mt7530_priv;
- 
- struct mt753x_pcs {
diff --git a/target/linux/generic/backport-6.1/790-10-v6.4-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch b/target/linux/generic/backport-6.1/790-10-v6.4-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch
deleted file mode 100644
index a6af6828264e..000000000000
--- a/target/linux/generic/backport-6.1/790-10-v6.4-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch
+++ /dev/null
@@ -1,155 +0,0 @@
-From a0c6527a38d518ff175c1b6ce248e9b06cc98d3b Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:18:39 +0100
-Subject: [PATCH 10/48] net: dsa: mt7530: introduce mt7530_probe_common helper
- function
-
-Move commonly used parts from mt7530_probe into new mt7530_probe_common
-helper function which will be used by both, mt7530_probe and the
-to-be-introduced mt7988_probe.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 98 ++++++++++++++++++++++------------------
- 1 file changed, 54 insertions(+), 44 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3399,44 +3399,21 @@ static const struct of_device_id mt7530_
- MODULE_DEVICE_TABLE(of, mt7530_of_match);
- 
- static int
--mt7530_probe(struct mdio_device *mdiodev)
-+mt7530_probe_common(struct mt7530_priv *priv)
- {
--	static struct regmap_config *regmap_config;
--	struct mt7530_priv *priv;
--	struct device_node *dn;
--	int ret;
-+	struct device *dev = priv->dev;
- 
--	dn = mdiodev->dev.of_node;
--
--	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
--	if (!priv)
--		return -ENOMEM;
--
--	priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
-+	priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
- 	if (!priv->ds)
- 		return -ENOMEM;
- 
--	priv->ds->dev = &mdiodev->dev;
-+	priv->ds->dev = dev;
- 	priv->ds->num_ports = MT7530_NUM_PORTS;
- 
--	/* Use medatek,mcm property to distinguish hardware type that would
--	 * casues a little bit differences on power-on sequence.
--	 */
--	priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
--	if (priv->mcm) {
--		dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
--
--		priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
--		if (IS_ERR(priv->rstc)) {
--			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
--			return PTR_ERR(priv->rstc);
--		}
--	}
--
- 	/* Get the hardware identifier from the devicetree node.
- 	 * We will need it for some of the clock and regulator setup.
- 	 */
--	priv->info = of_device_get_match_data(&mdiodev->dev);
-+	priv->info = of_device_get_match_data(dev);
- 	if (!priv->info)
- 		return -EINVAL;
- 
-@@ -3450,23 +3427,53 @@ mt7530_probe(struct mdio_device *mdiodev
- 		return -EINVAL;
- 
- 	priv->id = priv->info->id;
-+	priv->dev = dev;
-+	priv->ds->priv = priv;
-+	priv->ds->ops = &mt7530_switch_ops;
-+	mutex_init(&priv->reg_mutex);
-+	dev_set_drvdata(dev, priv);
- 
--	if (priv->id == ID_MT7530) {
--		priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
--		if (IS_ERR(priv->core_pwr))
--			return PTR_ERR(priv->core_pwr);
-+	return 0;
-+}
- 
--		priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
--		if (IS_ERR(priv->io_pwr))
--			return PTR_ERR(priv->io_pwr);
--	}
-+static int
-+mt7530_probe(struct mdio_device *mdiodev)
-+{
-+	static struct regmap_config *regmap_config;
-+	struct mt7530_priv *priv;
-+	struct device_node *dn;
-+	int ret;
-+
-+	dn = mdiodev->dev.of_node;
-+
-+	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
- 
--	/* Not MCM that indicates switch works as the remote standalone
-+	priv->bus = mdiodev->bus;
-+	priv->dev = &mdiodev->dev;
-+
-+	ret = mt7530_probe_common(priv);
-+	if (ret)
-+		return ret;
-+
-+	/* Use medatek,mcm property to distinguish hardware type that would
-+	 * cause a little bit differences on power-on sequence.
-+	 * Not MCM that indicates switch works as the remote standalone
- 	 * integrated circuit so the GPIO pin would be used to complete
- 	 * the reset, otherwise memory-mapped register accessing used
- 	 * through syscon provides in the case of MCM.
- 	 */
--	if (!priv->mcm) {
-+	priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
-+	if (priv->mcm) {
-+		dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
-+
-+		priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
-+		if (IS_ERR(priv->rstc)) {
-+			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
-+			return PTR_ERR(priv->rstc);
-+		}
-+	} else {
- 		priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
- 						      GPIOD_OUT_LOW);
- 		if (IS_ERR(priv->reset)) {
-@@ -3475,12 +3482,15 @@ mt7530_probe(struct mdio_device *mdiodev
- 		}
- 	}
- 
--	priv->bus = mdiodev->bus;
--	priv->dev = &mdiodev->dev;
--	priv->ds->priv = priv;
--	priv->ds->ops = &mt7530_switch_ops;
--	mutex_init(&priv->reg_mutex);
--	dev_set_drvdata(&mdiodev->dev, priv);
-+	if (priv->id == ID_MT7530) {
-+		priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
-+		if (IS_ERR(priv->core_pwr))
-+			return PTR_ERR(priv->core_pwr);
-+
-+		priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
-+		if (IS_ERR(priv->io_pwr))
-+			return PTR_ERR(priv->io_pwr);
-+	}
- 
- 	regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
- 				     GFP_KERNEL);
diff --git a/target/linux/generic/backport-6.1/790-11-v6.4-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch b/target/linux/generic/backport-6.1/790-11-v6.4-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch
deleted file mode 100644
index 4192753e89b3..000000000000
--- a/target/linux/generic/backport-6.1/790-11-v6.4-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From a7783b0b6f3b38abd34cecf515811691714dee57 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:18:50 +0100
-Subject: [PATCH 11/48] net: dsa: mt7530: introduce mt7530_remove_common helper
- function
-
-Move commonly used parts from mt7530_remove into new
-mt7530_remove_common helper function which will be used by both,
-mt7530_remove and the to-be-introduced mt7988_remove.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 18 ++++++++++++------
- 1 file changed, 12 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3517,6 +3517,17 @@ mt7530_probe(struct mdio_device *mdiodev
- }
- 
- static void
-+mt7530_remove_common(struct mt7530_priv *priv)
-+{
-+	if (priv->irq)
-+		mt7530_free_irq(priv);
-+
-+	dsa_unregister_switch(priv->ds);
-+
-+	mutex_destroy(&priv->reg_mutex);
-+}
-+
-+static void
- mt7530_remove(struct mdio_device *mdiodev)
- {
- 	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
-@@ -3535,15 +3546,10 @@ mt7530_remove(struct mdio_device *mdiode
- 		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
- 			ret);
- 
--	if (priv->irq)
--		mt7530_free_irq(priv);
--
--	dsa_unregister_switch(priv->ds);
-+	mt7530_remove_common(priv);
- 
- 	for (i = 0; i < 2; ++i)
- 		mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
--
--	mutex_destroy(&priv->reg_mutex);
- }
- 
- static void mt7530_shutdown(struct mdio_device *mdiodev)
diff --git a/target/linux/generic/backport-6.1/790-12-v6.4-net-dsa-mt7530-introduce-separate-MDIO-driver.patch b/target/linux/generic/backport-6.1/790-12-v6.4-net-dsa-mt7530-introduce-separate-MDIO-driver.patch
deleted file mode 100644
index 72a499381f40..000000000000
--- a/target/linux/generic/backport-6.1/790-12-v6.4-net-dsa-mt7530-introduce-separate-MDIO-driver.patch
+++ /dev/null
@@ -1,695 +0,0 @@
-From 5313432ca1e1a0677ad7b4f17a7e0186473f47aa Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:19:13 +0100
-Subject: [PATCH 12/48] net: dsa: mt7530: introduce separate MDIO driver
-
-Split MT7530 switch driver into a common part and a part specific
-for MDIO connected switches and multi-chip modules.
-Move MDIO-specific functions to newly introduced mt7530-mdio.c while
-keeping the common parts in mt7530.c.
-Introduce new Kconfig symbol CONFIG_NET_DSA_MT7530_MDIO which is
-implied by CONFIG_NET_DSA_MT7530.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                   |   1 +
- drivers/net/dsa/Kconfig       |  18 ++-
- drivers/net/dsa/Makefile      |   1 +
- drivers/net/dsa/mt7530-mdio.c | 271 ++++++++++++++++++++++++++++++++++
- drivers/net/dsa/mt7530.c      | 264 +--------------------------------
- drivers/net/dsa/mt7530.h      |   6 +
- 6 files changed, 302 insertions(+), 259 deletions(-)
- create mode 100644 drivers/net/dsa/mt7530-mdio.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -13069,6 +13069,7 @@ M:	Landen Chao <Landen.Chao@mediatek.com
- M:	DENG Qingfang <dqfext@gmail.com>
- L:	netdev@vger.kernel.org
- S:	Maintained
-+F:	drivers/net/dsa/mt7530-mdio.c
- F:	drivers/net/dsa/mt7530.*
- F:	net/dsa/tag_mtk.c
- 
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -34,13 +34,25 @@ config NET_DSA_LANTIQ_GSWIP
- 	  the xrx200 / VR9 SoC.
- 
- config NET_DSA_MT7530
--	tristate "MediaTek MT753x and MT7621 Ethernet switch support"
-+	tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
- 	select NET_DSA_TAG_MTK
-+	imply NET_DSA_MT7530_MDIO
-+	help
-+	  This enables support for the MediaTek MT7530 and MT7531 Ethernet
-+	  switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
-+	  MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
-+	  supported as well.
-+
-+config NET_DSA_MT7530_MDIO
-+	tristate "MediaTek MT7530 MDIO interface driver"
-+	depends on NET_DSA_MT7530
- 	select MEDIATEK_GE_PHY
- 	select PCS_MTK_LYNXI
- 	help
--	  This enables support for the MediaTek MT7530, MT7531, and MT7621
--	  Ethernet switch chips.
-+	  This enables support for the MediaTek MT7530 and MT7531 switch
-+	  chips which are connected via MDIO, as well as multi-chip
-+	  module MT7530 which can be found in the MT7621AT, MT7621DAT,
-+	  MT7621ST and MT7623AI SoCs.
- 
- config NET_DSA_MV88E6060
- 	tristate "Marvell 88E6060 ethernet switch chip support"
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -7,6 +7,7 @@ obj-$(CONFIG_FIXED_PHY)		+= dsa_loop_bdi
- endif
- obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
- obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
-+obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
- obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
- obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
---- /dev/null
-+++ b/drivers/net/dsa/mt7530-mdio.c
-@@ -0,0 +1,271 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+
-+#include <linux/gpio/consumer.h>
-+#include <linux/mdio.h>
-+#include <linux/module.h>
-+#include <linux/pcs/pcs-mtk-lynxi.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_mdio.h>
-+#include <linux/of_net.h>
-+#include <linux/of_platform.h>
-+#include <linux/regmap.h>
-+#include <linux/reset.h>
-+#include <linux/regulator/consumer.h>
-+#include <net/dsa.h>
-+
-+#include "mt7530.h"
-+
-+static int
-+mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
-+{
-+	struct mii_bus *bus = context;
-+	u16 page, r, lo, hi;
-+	int ret;
-+
-+	page = (reg >> 6) & 0x3ff;
-+	r  = (reg >> 2) & 0xf;
-+	lo = val & 0xffff;
-+	hi = val >> 16;
-+
-+	/* MT7530 uses 31 as the pseudo port */
-+	ret = bus->write(bus, 0x1f, 0x1f, page);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = bus->write(bus, 0x1f, r,  lo);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = bus->write(bus, 0x1f, 0x10, hi);
-+	return ret;
-+}
-+
-+static int
-+mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
-+{
-+	struct mii_bus *bus = context;
-+	u16 page, r, lo, hi;
-+	int ret;
-+
-+	page = (reg >> 6) & 0x3ff;
-+	r = (reg >> 2) & 0xf;
-+
-+	/* MT7530 uses 31 as the pseudo port */
-+	ret = bus->write(bus, 0x1f, 0x1f, page);
-+	if (ret < 0)
-+		return ret;
-+
-+	lo = bus->read(bus, 0x1f, r);
-+	hi = bus->read(bus, 0x1f, 0x10);
-+
-+	*val = (hi << 16) | (lo & 0xffff);
-+
-+	return 0;
-+}
-+
-+static void
-+mt7530_mdio_regmap_lock(void *mdio_lock)
-+{
-+	mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED);
-+}
-+
-+static void
-+mt7530_mdio_regmap_unlock(void *mdio_lock)
-+{
-+	mutex_unlock(mdio_lock);
-+}
-+
-+static const struct regmap_bus mt7530_regmap_bus = {
-+	.reg_write = mt7530_regmap_write,
-+	.reg_read = mt7530_regmap_read,
-+};
-+
-+static int
-+mt7531_create_sgmii(struct mt7530_priv *priv)
-+{
-+	struct regmap_config *mt7531_pcs_config[2];
-+	struct phylink_pcs *pcs;
-+	struct regmap *regmap;
-+	int i, ret = 0;
-+
-+	for (i = 0; i < 2; i++) {
-+		mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
-+						    sizeof(struct regmap_config),
-+						    GFP_KERNEL);
-+		if (!mt7531_pcs_config[i]) {
-+			ret = -ENOMEM;
-+			break;
-+		}
-+
-+		mt7531_pcs_config[i]->name = i ? "port6" : "port5";
-+		mt7531_pcs_config[i]->reg_bits = 16;
-+		mt7531_pcs_config[i]->val_bits = 32;
-+		mt7531_pcs_config[i]->reg_stride = 4;
-+		mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
-+		mt7531_pcs_config[i]->max_register = 0x17c;
-+		mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock;
-+		mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
-+		mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
-+
-+		regmap = devm_regmap_init(priv->dev,
-+					  &mt7530_regmap_bus, priv->bus,
-+					  mt7531_pcs_config[i]);
-+		if (IS_ERR(regmap)) {
-+			ret = PTR_ERR(regmap);
-+			break;
-+		}
-+		pcs = mtk_pcs_lynxi_create(priv->dev, regmap,
-+					   MT7531_PHYA_CTRL_SIGNAL3, 0);
-+		if (!pcs) {
-+			ret = -ENXIO;
-+			break;
-+		}
-+		priv->ports[5 + i].sgmii_pcs = pcs;
-+	}
-+
-+	if (ret && i)
-+		mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs);
-+
-+	return ret;
-+}
-+
-+static const struct of_device_id mt7530_of_match[] = {
-+	{ .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
-+	{ .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
-+	{ .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
-+	{ /* sentinel */ },
-+};
-+MODULE_DEVICE_TABLE(of, mt7530_of_match);
-+
-+static int
-+mt7530_probe(struct mdio_device *mdiodev)
-+{
-+	static struct regmap_config *regmap_config;
-+	struct mt7530_priv *priv;
-+	struct device_node *dn;
-+	int ret;
-+
-+	dn = mdiodev->dev.of_node;
-+
-+	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->bus = mdiodev->bus;
-+	priv->dev = &mdiodev->dev;
-+
-+	ret = mt7530_probe_common(priv);
-+	if (ret)
-+		return ret;
-+
-+	/* Use medatek,mcm property to distinguish hardware type that would
-+	 * cause a little bit differences on power-on sequence.
-+	 * Not MCM that indicates switch works as the remote standalone
-+	 * integrated circuit so the GPIO pin would be used to complete
-+	 * the reset, otherwise memory-mapped register accessing used
-+	 * through syscon provides in the case of MCM.
-+	 */
-+	priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
-+	if (priv->mcm) {
-+		dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
-+
-+		priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
-+		if (IS_ERR(priv->rstc)) {
-+			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
-+			return PTR_ERR(priv->rstc);
-+		}
-+	} else {
-+		priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
-+						      GPIOD_OUT_LOW);
-+		if (IS_ERR(priv->reset)) {
-+			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
-+			return PTR_ERR(priv->reset);
-+		}
-+	}
-+
-+	if (priv->id == ID_MT7530) {
-+		priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
-+		if (IS_ERR(priv->core_pwr))
-+			return PTR_ERR(priv->core_pwr);
-+
-+		priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
-+		if (IS_ERR(priv->io_pwr))
-+			return PTR_ERR(priv->io_pwr);
-+	}
-+
-+	regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
-+				     GFP_KERNEL);
-+	if (!regmap_config)
-+		return -ENOMEM;
-+
-+	regmap_config->reg_bits = 16;
-+	regmap_config->val_bits = 32;
-+	regmap_config->reg_stride = 4;
-+	regmap_config->max_register = MT7530_CREV;
-+	regmap_config->disable_locking = true;
-+	priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
-+					priv->bus, regmap_config);
-+	if (IS_ERR(priv->regmap))
-+		return PTR_ERR(priv->regmap);
-+
-+	if (priv->id == ID_MT7531) {
-+		ret = mt7531_create_sgmii(priv);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return dsa_register_switch(priv->ds);
-+}
-+
-+static void
-+mt7530_remove(struct mdio_device *mdiodev)
-+{
-+	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
-+	int ret = 0, i;
-+
-+	if (!priv)
-+		return;
-+
-+	ret = regulator_disable(priv->core_pwr);
-+	if (ret < 0)
-+		dev_err(priv->dev,
-+			"Failed to disable core power: %d\n", ret);
-+
-+	ret = regulator_disable(priv->io_pwr);
-+	if (ret < 0)
-+		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
-+			ret);
-+
-+	mt7530_remove_common(priv);
-+
-+	for (i = 0; i < 2; ++i)
-+		mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
-+}
-+
-+static void mt7530_shutdown(struct mdio_device *mdiodev)
-+{
-+	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
-+
-+	if (!priv)
-+		return;
-+
-+	dsa_switch_shutdown(priv->ds);
-+
-+	dev_set_drvdata(&mdiodev->dev, NULL);
-+}
-+
-+static struct mdio_driver mt7530_mdio_driver = {
-+	.probe  = mt7530_probe,
-+	.remove = mt7530_remove,
-+	.shutdown = mt7530_shutdown,
-+	.mdiodrv.driver = {
-+		.name = "mt7530-mdio",
-+		.of_match_table = mt7530_of_match,
-+	},
-+};
-+
-+mdio_module_driver(mt7530_mdio_driver);
-+
-+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
-+MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MDIO)");
-+MODULE_LICENSE("GPL");
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -14,7 +14,6 @@
- #include <linux/of_mdio.h>
- #include <linux/of_net.h>
- #include <linux/of_platform.h>
--#include <linux/pcs/pcs-mtk-lynxi.h>
- #include <linux/phylink.h>
- #include <linux/regmap.h>
- #include <linux/regulator/consumer.h>
-@@ -192,31 +191,6 @@ core_clear(struct mt7530_priv *priv, u32
- }
- 
- static int
--mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
--{
--	struct mii_bus *bus = context;
--	u16 page, r, lo, hi;
--	int ret;
--
--	page = (reg >> 6) & 0x3ff;
--	r  = (reg >> 2) & 0xf;
--	lo = val & 0xffff;
--	hi = val >> 16;
--
--	/* MT7530 uses 31 as the pseudo port */
--	ret = bus->write(bus, 0x1f, 0x1f, page);
--	if (ret < 0)
--		return ret;
--
--	ret = bus->write(bus, 0x1f, r,  lo);
--	if (ret < 0)
--		return ret;
--
--	ret = bus->write(bus, 0x1f, 0x10, hi);
--	return ret;
--}
--
--static int
- mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
- {
- 	int ret;
-@@ -230,29 +204,6 @@ mt7530_mii_write(struct mt7530_priv *pri
- 	return ret;
- }
- 
--static int
--mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
--{
--	struct mii_bus *bus = context;
--	u16 page, r, lo, hi;
--	int ret;
--
--	page = (reg >> 6) & 0x3ff;
--	r = (reg >> 2) & 0xf;
--
--	/* MT7530 uses 31 as the pseudo port */
--	ret = bus->write(bus, 0x1f, 0x1f, page);
--	if (ret < 0)
--		return ret;
--
--	lo = bus->read(bus, 0x1f, r);
--	hi = bus->read(bus, 0x1f, 0x10);
--
--	*val = (hi << 16) | (lo & 0xffff);
--
--	return 0;
--}
--
- static u32
- mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
- {
-@@ -3196,72 +3147,6 @@ static const struct phylink_pcs_ops mt75
- 	.pcs_an_restart = mt7530_pcs_an_restart,
- };
- 
--static void
--mt7530_mdio_regmap_lock(void *mdio_lock)
--{
--	mutex_lock_nested(mdio_lock, MDIO_MUTEX_NESTED);
--}
--
--static void
--mt7530_mdio_regmap_unlock(void *mdio_lock)
--{
--	mutex_unlock(mdio_lock);
--}
--
--static const struct regmap_bus mt7530_regmap_bus = {
--	.reg_write = mt7530_regmap_write,
--	.reg_read = mt7530_regmap_read,
--};
--
--static int
--mt7531_create_sgmii(struct mt7530_priv *priv)
--{
--	struct regmap_config *mt7531_pcs_config[2];
--	struct phylink_pcs *pcs;
--	struct regmap *regmap;
--	int i, ret = 0;
--
--	for (i = 0; i < 2; i++) {
--		mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
--						    sizeof(struct regmap_config),
--						    GFP_KERNEL);
--		if (!mt7531_pcs_config[i]) {
--			ret = -ENOMEM;
--			break;
--		}
--
--		mt7531_pcs_config[i]->name = i ? "port6" : "port5";
--		mt7531_pcs_config[i]->reg_bits = 16;
--		mt7531_pcs_config[i]->val_bits = 32;
--		mt7531_pcs_config[i]->reg_stride = 4;
--		mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i);
--		mt7531_pcs_config[i]->max_register = 0x17c;
--		mt7531_pcs_config[i]->lock = mt7530_mdio_regmap_lock;
--		mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
--		mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
--
--		regmap = devm_regmap_init(priv->dev,
--					  &mt7530_regmap_bus, priv->bus,
--					  mt7531_pcs_config[i]);
--		if (IS_ERR(regmap)) {
--			ret = PTR_ERR(regmap);
--			break;
--		}
--		pcs = mtk_pcs_lynxi_create(priv->dev, regmap,
--					   MT7531_PHYA_CTRL_SIGNAL3, 0);
--		if (!pcs) {
--			ret = -ENXIO;
--			break;
--		}
--		priv->ports[5 + i].sgmii_pcs = pcs;
--	}
--
--	if (ret && i)
--		mtk_pcs_lynxi_destroy(priv->ports[5].sgmii_pcs);
--
--	return ret;
--}
--
- static int
- mt753x_setup(struct dsa_switch *ds)
- {
-@@ -3320,7 +3205,7 @@ static int mt753x_set_mac_eee(struct dsa
- 	return 0;
- }
- 
--static const struct dsa_switch_ops mt7530_switch_ops = {
-+const struct dsa_switch_ops mt7530_switch_ops = {
- 	.get_tag_protocol	= mtk_get_tag_protocol,
- 	.setup			= mt753x_setup,
- 	.preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port,
-@@ -3355,8 +3240,9 @@ static const struct dsa_switch_ops mt753
- 	.get_mac_eee		= mt753x_get_mac_eee,
- 	.set_mac_eee		= mt753x_set_mac_eee,
- };
-+EXPORT_SYMBOL_GPL(mt7530_switch_ops);
- 
--static const struct mt753x_info mt753x_table[] = {
-+const struct mt753x_info mt753x_table[] = {
- 	[ID_MT7621] = {
- 		.id = ID_MT7621,
- 		.pcs_ops = &mt7530_pcs_ops,
-@@ -3389,16 +3275,9 @@ static const struct mt753x_info mt753x_t
- 		.mac_port_config = mt7531_mac_config,
- 	},
- };
-+EXPORT_SYMBOL_GPL(mt753x_table);
- 
--static const struct of_device_id mt7530_of_match[] = {
--	{ .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
--	{ .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
--	{ .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
--	{ /* sentinel */ },
--};
--MODULE_DEVICE_TABLE(of, mt7530_of_match);
--
--static int
-+int
- mt7530_probe_common(struct mt7530_priv *priv)
- {
- 	struct device *dev = priv->dev;
-@@ -3435,88 +3314,9 @@ mt7530_probe_common(struct mt7530_priv *
- 
- 	return 0;
- }
-+EXPORT_SYMBOL_GPL(mt7530_probe_common);
- 
--static int
--mt7530_probe(struct mdio_device *mdiodev)
--{
--	static struct regmap_config *regmap_config;
--	struct mt7530_priv *priv;
--	struct device_node *dn;
--	int ret;
--
--	dn = mdiodev->dev.of_node;
--
--	priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
--	if (!priv)
--		return -ENOMEM;
--
--	priv->bus = mdiodev->bus;
--	priv->dev = &mdiodev->dev;
--
--	ret = mt7530_probe_common(priv);
--	if (ret)
--		return ret;
--
--	/* Use medatek,mcm property to distinguish hardware type that would
--	 * cause a little bit differences on power-on sequence.
--	 * Not MCM that indicates switch works as the remote standalone
--	 * integrated circuit so the GPIO pin would be used to complete
--	 * the reset, otherwise memory-mapped register accessing used
--	 * through syscon provides in the case of MCM.
--	 */
--	priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
--	if (priv->mcm) {
--		dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
--
--		priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
--		if (IS_ERR(priv->rstc)) {
--			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
--			return PTR_ERR(priv->rstc);
--		}
--	} else {
--		priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
--						      GPIOD_OUT_LOW);
--		if (IS_ERR(priv->reset)) {
--			dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
--			return PTR_ERR(priv->reset);
--		}
--	}
--
--	if (priv->id == ID_MT7530) {
--		priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
--		if (IS_ERR(priv->core_pwr))
--			return PTR_ERR(priv->core_pwr);
--
--		priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
--		if (IS_ERR(priv->io_pwr))
--			return PTR_ERR(priv->io_pwr);
--	}
--
--	regmap_config = devm_kzalloc(&mdiodev->dev, sizeof(*regmap_config),
--				     GFP_KERNEL);
--	if (!regmap_config)
--		return -ENOMEM;
--
--	regmap_config->reg_bits = 16;
--	regmap_config->val_bits = 32;
--	regmap_config->reg_stride = 4;
--	regmap_config->max_register = MT7530_CREV;
--	regmap_config->disable_locking = true;
--	priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
--					priv->bus, regmap_config);
--	if (IS_ERR(priv->regmap))
--		return PTR_ERR(priv->regmap);
--
--	if (priv->id == ID_MT7531) {
--		ret = mt7531_create_sgmii(priv);
--		if (ret)
--			return ret;
--	}
--
--	return dsa_register_switch(priv->ds);
--}
--
--static void
-+void
- mt7530_remove_common(struct mt7530_priv *priv)
- {
- 	if (priv->irq)
-@@ -3526,55 +3326,7 @@ mt7530_remove_common(struct mt7530_priv
- 
- 	mutex_destroy(&priv->reg_mutex);
- }
--
--static void
--mt7530_remove(struct mdio_device *mdiodev)
--{
--	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
--	int ret = 0, i;
--
--	if (!priv)
--		return;
--
--	ret = regulator_disable(priv->core_pwr);
--	if (ret < 0)
--		dev_err(priv->dev,
--			"Failed to disable core power: %d\n", ret);
--
--	ret = regulator_disable(priv->io_pwr);
--	if (ret < 0)
--		dev_err(priv->dev, "Failed to disable io pwr: %d\n",
--			ret);
--
--	mt7530_remove_common(priv);
--
--	for (i = 0; i < 2; ++i)
--		mtk_pcs_lynxi_destroy(priv->ports[5 + i].sgmii_pcs);
--}
--
--static void mt7530_shutdown(struct mdio_device *mdiodev)
--{
--	struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
--
--	if (!priv)
--		return;
--
--	dsa_switch_shutdown(priv->ds);
--
--	dev_set_drvdata(&mdiodev->dev, NULL);
--}
--
--static struct mdio_driver mt7530_mdio_driver = {
--	.probe  = mt7530_probe,
--	.remove = mt7530_remove,
--	.shutdown = mt7530_shutdown,
--	.mdiodrv.driver = {
--		.name = "mt7530",
--		.of_match_table = mt7530_of_match,
--	},
--};
--
--mdio_module_driver(mt7530_mdio_driver);
-+EXPORT_SYMBOL_GPL(mt7530_remove_common);
- 
- MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
- MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -845,4 +845,10 @@ static inline void INIT_MT7530_DUMMY_POL
- 	p->reg = reg;
- }
- 
-+int mt7530_probe_common(struct mt7530_priv *priv);
-+void mt7530_remove_common(struct mt7530_priv *priv);
-+
-+extern const struct dsa_switch_ops mt7530_switch_ops;
-+extern const struct mt753x_info mt753x_table[];
-+
- #endif /* __MT7530_H */
diff --git a/target/linux/generic/backport-6.1/790-13-v6.4-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch b/target/linux/generic/backport-6.1/790-13-v6.4-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch
deleted file mode 100644
index dae7dd4a48c4..000000000000
--- a/target/linux/generic/backport-6.1/790-13-v6.4-net-dsa-mt7530-skip-locking-if-MDIO-bus-isn-t-presen.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 86e1168a214b7ab0883acf1e7a6885a7a949e3e7 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:19:28 +0100
-Subject: [PATCH 13/48] net: dsa: mt7530: skip locking if MDIO bus isn't
- present
-
-As MT7530 and MT7531 internally use 32-bit wide registers, each access
-to any register of the switch requires several operations on the MDIO
-bus. Hence if there is congruent access, e.g. due to PCS or PHY
-polling, this can mess up and interfere with another ongoing register
-access sequence.
-
-However, the MDIO bus mutex is only relevant for MDIO-connected
-switches. Prepare switches which have there registers directly mapped
-into the SoCs register space via MMIO which do not require such
-locking. There we can simply use regmap's default locking mechanism.
-
-Hence guard mutex operations to only be performed in case of MDIO
-connected switches.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -144,13 +144,15 @@ err:
- static void
- mt7530_mutex_lock(struct mt7530_priv *priv)
- {
--	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+	if (priv->bus)
-+		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
- }
- 
- static void
- mt7530_mutex_unlock(struct mt7530_priv *priv)
- {
--	mutex_unlock(&priv->bus->mdio_lock);
-+	if (priv->bus)
-+		mutex_unlock(&priv->bus->mdio_lock);
- }
- 
- static void
diff --git a/target/linux/generic/backport-6.1/790-14-v6.4-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch b/target/linux/generic/backport-6.1/790-14-v6.4-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch
deleted file mode 100644
index f5573fc6c458..000000000000
--- a/target/linux/generic/backport-6.1/790-14-v6.4-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch
+++ /dev/null
@@ -1,421 +0,0 @@
-From a1b87b6322db9186c8689710fe3e98f59e540949 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 02:19:40 +0100
-Subject: [PATCH 14/48] net: dsa: mt7530: introduce driver for MT7988 built-in
- switch
-
-Add driver for the built-in Gigabit Ethernet switch which can be found
-in the MediaTek MT7988 SoC.
-
-The switch shares most of its design with MT7530 and MT7531, but has
-it's registers mapped into the SoCs register space rather than being
-connected externally or internally via MDIO.
-
-Introduce a new platform driver to support that.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                   |   2 +
- drivers/net/dsa/Kconfig       |  12 +++
- drivers/net/dsa/Makefile      |   1 +
- drivers/net/dsa/mt7530-mmio.c | 101 +++++++++++++++++++++++++
- drivers/net/dsa/mt7530.c      | 135 +++++++++++++++++++++++++++++++++-
- drivers/net/dsa/mt7530.h      |  12 +--
- 6 files changed, 253 insertions(+), 10 deletions(-)
- create mode 100644 drivers/net/dsa/mt7530-mmio.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -13067,9 +13067,11 @@ MEDIATEK SWITCH DRIVER
- M:	Sean Wang <sean.wang@mediatek.com>
- M:	Landen Chao <Landen.Chao@mediatek.com>
- M:	DENG Qingfang <dqfext@gmail.com>
-+M:	Daniel Golle <daniel@makrotopia.org>
- L:	netdev@vger.kernel.org
- S:	Maintained
- F:	drivers/net/dsa/mt7530-mdio.c
-+F:	drivers/net/dsa/mt7530-mmio.c
- F:	drivers/net/dsa/mt7530.*
- F:	net/dsa/tag_mtk.c
- 
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -37,6 +37,7 @@ config NET_DSA_MT7530
- 	tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
- 	select NET_DSA_TAG_MTK
- 	imply NET_DSA_MT7530_MDIO
-+	imply NET_DSA_MT7530_MMIO
- 	help
- 	  This enables support for the MediaTek MT7530 and MT7531 Ethernet
- 	  switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
-@@ -54,6 +55,17 @@ config NET_DSA_MT7530_MDIO
- 	  module MT7530 which can be found in the MT7621AT, MT7621DAT,
- 	  MT7621ST and MT7623AI SoCs.
- 
-+config NET_DSA_MT7530_MMIO
-+	tristate "MediaTek MT7530 MMIO interface driver"
-+	depends on NET_DSA_MT7530
-+	depends on HAS_IOMEM
-+	help
-+	  This enables support for the built-in Ethernet switch found
-+	  in the MediaTek MT7988 SoC.
-+	  The switch is a similar design as MT7531, but the switch registers
-+	  are directly mapped into the SoCs register space rather than being
-+	  accessible via MDIO.
-+
- config NET_DSA_MV88E6060
- 	tristate "Marvell 88E6060 ethernet switch chip support"
- 	select NET_DSA_TAG_TRAILER
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -8,6 +8,7 @@ endif
- obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
- obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
- obj-$(CONFIG_NET_DSA_MT7530_MDIO) += mt7530-mdio.o
-+obj-$(CONFIG_NET_DSA_MT7530_MMIO) += mt7530-mmio.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
- obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
- obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
---- /dev/null
-+++ b/drivers/net/dsa/mt7530-mmio.c
-@@ -0,0 +1,101 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/regmap.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/reset.h>
-+#include <net/dsa.h>
-+
-+#include "mt7530.h"
-+
-+static const struct of_device_id mt7988_of_match[] = {
-+	{ .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], },
-+	{ /* sentinel */ },
-+};
-+MODULE_DEVICE_TABLE(of, mt7988_of_match);
-+
-+static int
-+mt7988_probe(struct platform_device *pdev)
-+{
-+	static struct regmap_config *sw_regmap_config;
-+	struct mt7530_priv *priv;
-+	void __iomem *base_addr;
-+	int ret;
-+
-+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->bus = NULL;
-+	priv->dev = &pdev->dev;
-+
-+	ret = mt7530_probe_common(priv);
-+	if (ret)
-+		return ret;
-+
-+	priv->rstc = devm_reset_control_get(&pdev->dev, NULL);
-+	if (IS_ERR(priv->rstc)) {
-+		dev_err(&pdev->dev, "Couldn't get our reset line\n");
-+		return PTR_ERR(priv->rstc);
-+	}
-+
-+	base_addr = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(base_addr)) {
-+		dev_err(&pdev->dev, "cannot request I/O memory space\n");
-+		return -ENXIO;
-+	}
-+
-+	sw_regmap_config = devm_kzalloc(&pdev->dev, sizeof(*sw_regmap_config), GFP_KERNEL);
-+	if (!sw_regmap_config)
-+		return -ENOMEM;
-+
-+	sw_regmap_config->name = "switch";
-+	sw_regmap_config->reg_bits = 16;
-+	sw_regmap_config->val_bits = 32;
-+	sw_regmap_config->reg_stride = 4;
-+	sw_regmap_config->max_register = MT7530_CREV;
-+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base_addr, sw_regmap_config);
-+	if (IS_ERR(priv->regmap))
-+		return PTR_ERR(priv->regmap);
-+
-+	return dsa_register_switch(priv->ds);
-+}
-+
-+static int
-+mt7988_remove(struct platform_device *pdev)
-+{
-+	struct mt7530_priv *priv = platform_get_drvdata(pdev);
-+
-+	if (priv)
-+		mt7530_remove_common(priv);
-+
-+	return 0;
-+}
-+
-+static void mt7988_shutdown(struct platform_device *pdev)
-+{
-+	struct mt7530_priv *priv = platform_get_drvdata(pdev);
-+
-+	if (!priv)
-+		return;
-+
-+	dsa_switch_shutdown(priv->ds);
-+
-+	dev_set_drvdata(&pdev->dev, NULL);
-+}
-+
-+static struct platform_driver mt7988_platform_driver = {
-+	.probe  = mt7988_probe,
-+	.remove = mt7988_remove,
-+	.shutdown = mt7988_shutdown,
-+	.driver = {
-+		.name = "mt7530-mmio",
-+		.of_match_table = mt7988_of_match,
-+	},
-+};
-+module_platform_driver(mt7988_platform_driver);
-+
-+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
-+MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch (MMIO)");
-+MODULE_LICENSE("GPL");
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2223,6 +2223,47 @@ static const struct irq_domain_ops mt753
- };
- 
- static void
-+mt7988_irq_mask(struct irq_data *d)
-+{
-+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
-+
-+	priv->irq_enable &= ~BIT(d->hwirq);
-+	mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
-+}
-+
-+static void
-+mt7988_irq_unmask(struct irq_data *d)
-+{
-+	struct mt7530_priv *priv = irq_data_get_irq_chip_data(d);
-+
-+	priv->irq_enable |= BIT(d->hwirq);
-+	mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable);
-+}
-+
-+static struct irq_chip mt7988_irq_chip = {
-+	.name = KBUILD_MODNAME,
-+	.irq_mask = mt7988_irq_mask,
-+	.irq_unmask = mt7988_irq_unmask,
-+};
-+
-+static int
-+mt7988_irq_map(struct irq_domain *domain, unsigned int irq,
-+	       irq_hw_number_t hwirq)
-+{
-+	irq_set_chip_data(irq, domain->host_data);
-+	irq_set_chip_and_handler(irq, &mt7988_irq_chip, handle_simple_irq);
-+	irq_set_nested_thread(irq, true);
-+	irq_set_noprobe(irq);
-+
-+	return 0;
-+}
-+
-+static const struct irq_domain_ops mt7988_irq_domain_ops = {
-+	.map = mt7988_irq_map,
-+	.xlate = irq_domain_xlate_onecell,
-+};
-+
-+static void
- mt7530_setup_mdio_irq(struct mt7530_priv *priv)
- {
- 	struct dsa_switch *ds = priv->ds;
-@@ -2256,8 +2297,15 @@ mt7530_setup_irq(struct mt7530_priv *pri
- 		return priv->irq ? : -EINVAL;
- 	}
- 
--	priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
--						 &mt7530_irq_domain_ops, priv);
-+	if (priv->id == ID_MT7988)
-+		priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
-+							 &mt7988_irq_domain_ops,
-+							 priv);
-+	else
-+		priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
-+							 &mt7530_irq_domain_ops,
-+							 priv);
-+
- 	if (!priv->irq_domain) {
- 		dev_err(dev, "failed to create IRQ domain\n");
- 		return -ENOMEM;
-@@ -2762,6 +2810,25 @@ static void mt7531_mac_port_get_caps(str
- 	}
- }
- 
-+static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
-+				     struct phylink_config *config)
-+{
-+	phy_interface_zero(config->supported_interfaces);
-+
-+	switch (port) {
-+	case 0 ... 4: /* Internal phy */
-+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
-+			  config->supported_interfaces);
-+		break;
-+
-+	case 6:
-+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
-+			  config->supported_interfaces);
-+		config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
-+					   MAC_10000FD;
-+	}
-+}
-+
- static int
- mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
- {
-@@ -2838,6 +2905,17 @@ static bool mt753x_is_mac_port(u32 port)
- }
- 
- static int
-+mt7988_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
-+		  phy_interface_t interface)
-+{
-+	if (dsa_is_cpu_port(ds, port) &&
-+	    interface == PHY_INTERFACE_MODE_INTERNAL)
-+		return 0;
-+
-+	return -EINVAL;
-+}
-+
-+static int
- mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
- 		  phy_interface_t interface)
- {
-@@ -2907,7 +2985,8 @@ mt753x_phylink_mac_config(struct dsa_swi
- 
- 	switch (port) {
- 	case 0 ... 4: /* Internal phy */
--		if (state->interface != PHY_INTERFACE_MODE_GMII)
-+		if (state->interface != PHY_INTERFACE_MODE_GMII &&
-+		    state->interface != PHY_INTERFACE_MODE_INTERNAL)
- 			goto unsupported;
- 		break;
- 	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
-@@ -2985,7 +3064,8 @@ static void mt753x_phylink_mac_link_up(s
- 	/* MT753x MAC works in 1G full duplex mode for all up-clocked
- 	 * variants.
- 	 */
--	if (interface == PHY_INTERFACE_MODE_TRGMII ||
-+	if (interface == PHY_INTERFACE_MODE_INTERNAL ||
-+	    interface == PHY_INTERFACE_MODE_TRGMII ||
- 	    (phy_interface_mode_is_8023z(interface))) {
- 		speed = SPEED_1000;
- 		duplex = DUPLEX_FULL;
-@@ -3065,6 +3145,21 @@ mt7531_cpu_port_config(struct dsa_switch
- 	return 0;
- }
- 
-+static int
-+mt7988_cpu_port_config(struct dsa_switch *ds, int port)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+
-+	mt7530_write(priv, MT7530_PMCR_P(port),
-+		     PMCR_CPU_PORT_SETTING(priv->id));
-+
-+	mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED,
-+				   PHY_INTERFACE_MODE_INTERNAL, NULL,
-+				   SPEED_10000, DUPLEX_FULL, true, true);
-+
-+	return 0;
-+}
-+
- static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
- 				    struct phylink_config *config)
- {
-@@ -3207,6 +3302,27 @@ static int mt753x_set_mac_eee(struct dsa
- 	return 0;
- }
- 
-+static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
-+{
-+	return 0;
-+}
-+
-+static int mt7988_setup(struct dsa_switch *ds)
-+{
-+	struct mt7530_priv *priv = ds->priv;
-+
-+	/* Reset the switch */
-+	reset_control_assert(priv->rstc);
-+	usleep_range(20, 50);
-+	reset_control_deassert(priv->rstc);
-+	usleep_range(20, 50);
-+
-+	/* Reset the switch PHYs */
-+	mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST);
-+
-+	return mt7531_setup_common(ds);
-+}
-+
- const struct dsa_switch_ops mt7530_switch_ops = {
- 	.get_tag_protocol	= mtk_get_tag_protocol,
- 	.setup			= mt753x_setup,
-@@ -3276,6 +3392,17 @@ const struct mt753x_info mt753x_table[]
- 		.mac_port_get_caps = mt7531_mac_port_get_caps,
- 		.mac_port_config = mt7531_mac_config,
- 	},
-+	[ID_MT7988] = {
-+		.id = ID_MT7988,
-+		.pcs_ops = &mt7530_pcs_ops,
-+		.sw_setup = mt7988_setup,
-+		.phy_read = mt7531_ind_phy_read,
-+		.phy_write = mt7531_ind_phy_write,
-+		.pad_setup = mt7988_pad_setup,
-+		.cpu_port_config = mt7988_cpu_port_config,
-+		.mac_port_get_caps = mt7988_mac_port_get_caps,
-+		.mac_port_config = mt7988_mac_config,
-+	},
- };
- EXPORT_SYMBOL_GPL(mt753x_table);
- 
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -18,6 +18,7 @@ enum mt753x_id {
- 	ID_MT7530 = 0,
- 	ID_MT7621 = 1,
- 	ID_MT7531 = 2,
-+	ID_MT7988 = 3,
- };
- 
- #define	NUM_TRGMII_CTRL			5
-@@ -59,11 +60,11 @@ enum mt753x_id {
- #define  MT7531_CPU_PMAP_MASK		GENMASK(7, 0)
- #define  MT7531_CPU_PMAP(x)		FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
- 
--#define MT753X_MIRROR_REG(id)		(((id) == ID_MT7531) ? \
-+#define MT753X_MIRROR_REG(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
- 					 MT7531_CFC : MT7530_MFC)
--#define MT753X_MIRROR_EN(id)		(((id) == ID_MT7531) ? \
-+#define MT753X_MIRROR_EN(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
- 					 MT7531_MIRROR_EN : MIRROR_EN)
--#define MT753X_MIRROR_MASK(id)		(((id) == ID_MT7531) ? \
-+#define MT753X_MIRROR_MASK(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
- 					 MT7531_MIRROR_MASK : MIRROR_MASK)
- 
- /* Registers for BPDU and PAE frame control*/
-@@ -332,9 +333,8 @@ enum mt7530_vlan_port_acc_frm {
- 					 MT7531_FORCE_DPX | \
- 					 MT7531_FORCE_RX_FC | \
- 					 MT7531_FORCE_TX_FC)
--#define  PMCR_FORCE_MODE_ID(id)		(((id) == ID_MT7531) ? \
--					 MT7531_FORCE_MODE : \
--					 PMCR_FORCE_MODE)
-+#define  PMCR_FORCE_MODE_ID(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
-+					 MT7531_FORCE_MODE : PMCR_FORCE_MODE)
- #define  PMCR_LINK_SETTINGS_MASK	(PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
- 					 PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
- 					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
diff --git a/target/linux/generic/backport-6.1/790-15-v6.4-net-dsa-mt7530-fix-support-for-MT7531BE.patch b/target/linux/generic/backport-6.1/790-15-v6.4-net-dsa-mt7530-fix-support-for-MT7531BE.patch
deleted file mode 100644
index 40209b030583..000000000000
--- a/target/linux/generic/backport-6.1/790-15-v6.4-net-dsa-mt7530-fix-support-for-MT7531BE.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From ed01748319b25456c5226ed0cb5e49e970da0e4f Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 16 Apr 2023 13:08:14 +0100
-Subject: [PATCH 15/48] net: dsa: mt7530: fix support for MT7531BE
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are two variants of the MT7531 switch IC which got different
-features (and pins) regarding port 5:
- * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes PCS
- * MT7531BE: RGMII
-
-Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe
-with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation
-to mt7530_probe function") works fine for MT7531AE which got two
-instances of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup
-to setup clocks before the single PCS on port 6 (usually used as CPU
-port) starts to work and hence the PCS creation failed on MT7531BE.
-
-Fix this by introducing a pointer to mt7531_create_sgmii function in
-struct mt7530_priv and call it again at the end of mt753x_setup like it
-was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS
-creation to mt7530_probe function").
-
-Fixes: 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/ZDvlLhhqheobUvOK@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530-mdio.c | 16 ++++++++--------
- drivers/net/dsa/mt7530.c      |  6 ++++++
- drivers/net/dsa/mt7530.h      |  4 ++--
- 3 files changed, 16 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/mt7530-mdio.c
-+++ b/drivers/net/dsa/mt7530-mdio.c
-@@ -81,14 +81,17 @@ static const struct regmap_bus mt7530_re
- };
- 
- static int
--mt7531_create_sgmii(struct mt7530_priv *priv)
-+mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
- {
--	struct regmap_config *mt7531_pcs_config[2];
-+	struct regmap_config *mt7531_pcs_config[2] = {};
- 	struct phylink_pcs *pcs;
- 	struct regmap *regmap;
- 	int i, ret = 0;
- 
--	for (i = 0; i < 2; i++) {
-+	/* MT7531AE has two SGMII units for port 5 and port 6
-+	 * MT7531BE has only one SGMII unit for port 6
-+	 */
-+	for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
- 		mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
- 						    sizeof(struct regmap_config),
- 						    GFP_KERNEL);
-@@ -208,11 +211,8 @@ mt7530_probe(struct mdio_device *mdiodev
- 	if (IS_ERR(priv->regmap))
- 		return PTR_ERR(priv->regmap);
- 
--	if (priv->id == ID_MT7531) {
--		ret = mt7531_create_sgmii(priv);
--		if (ret)
--			return ret;
--	}
-+	if (priv->id == ID_MT7531)
-+		priv->create_sgmii = mt7531_create_sgmii;
- 
- 	return dsa_register_switch(priv->ds);
- }
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3269,6 +3269,12 @@ mt753x_setup(struct dsa_switch *ds)
- 	if (ret && priv->irq)
- 		mt7530_free_irq_common(priv);
- 
-+	if (priv->create_sgmii) {
-+		ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
-+		if (ret && priv->irq)
-+			mt7530_free_irq(priv);
-+	}
-+
- 	return ret;
- }
- 
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -779,10 +779,10 @@ struct mt753x_info {
-  *			registers
-  * @p6_interface	Holding the current port 6 interface
-  * @p5_intf_sel:	Holding the current port 5 interface select
-- *
-  * @irq:		IRQ number of the switch
-  * @irq_domain:		IRQ domain of the switch irq_chip
-  * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
-+ * @create_sgmii:	Pointer to function creating SGMII PCS instance(s)
-  */
- struct mt7530_priv {
- 	struct device		*dev;
-@@ -801,7 +801,6 @@ struct mt7530_priv {
- 	unsigned int		p5_intf_sel;
- 	u8			mirror_rx;
- 	u8			mirror_tx;
--
- 	struct mt7530_port	ports[MT7530_NUM_PORTS];
- 	struct mt753x_pcs	pcs[MT7530_NUM_PORTS];
- 	/* protect among processes for registers access*/
-@@ -809,6 +808,7 @@ struct mt7530_priv {
- 	int irq;
- 	struct irq_domain *irq_domain;
- 	u32 irq_enable;
-+	int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
- };
- 
- struct mt7530_hw_vlan_entry {
diff --git a/target/linux/generic/backport-6.1/790-17-v6.5-net-dsa-mt7530-update-PCS-driver-to-use-neg_mode.patch b/target/linux/generic/backport-6.1/790-17-v6.5-net-dsa-mt7530-update-PCS-driver-to-use-neg_mode.patch
deleted file mode 100644
index 78e332b1c2ae..000000000000
--- a/target/linux/generic/backport-6.1/790-17-v6.5-net-dsa-mt7530-update-PCS-driver-to-use-neg_mode.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From fb6858e2c3b931433ea4d25871c272ee4c01bd99 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 16 Jun 2023 13:07:29 +0100
-Subject: [PATCH 17/48] net: dsa: mt7530: update PCS driver to use neg_mode
-
-Update mt7530's embedded PCS driver to use neg_mode, even though it
-makes no use of it or the "mode" argument. This makes the driver
-consistent with converted drivers.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Link: https://lore.kernel.org/r/E1qA8Ej-00EaGR-Fk@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3225,7 +3225,7 @@ static void mt7530_pcs_get_state(struct
- 		state->pause |= MLO_PAUSE_TX;
- }
- 
--static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
-+static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
- 			     phy_interface_t interface,
- 			     const unsigned long *advertising,
- 			     bool permit_pause_to_mac)
-@@ -3253,6 +3253,7 @@ mt753x_setup(struct dsa_switch *ds)
- 	/* Initialise the PCS devices */
- 	for (i = 0; i < priv->ds->num_ports; i++) {
- 		priv->pcs[i].pcs.ops = priv->info->pcs_ops;
-+		priv->pcs[i].pcs.neg_mode = true;
- 		priv->pcs[i].priv = priv;
- 		priv->pcs[i].port = i;
- 	}
diff --git a/target/linux/generic/backport-6.1/790-18-v6.7-net-dsa-mt7530-Convert-to-platform-remove-callback-r.patch b/target/linux/generic/backport-6.1/790-18-v6.7-net-dsa-mt7530-Convert-to-platform-remove-callback-r.patch
deleted file mode 100644
index ffcf51dab5ea..000000000000
--- a/target/linux/generic/backport-6.1/790-18-v6.7-net-dsa-mt7530-Convert-to-platform-remove-callback-r.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 03ede98ecc29b59fb364f735d6de0e6a4c1735fc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
-Date: Mon, 18 Sep 2023 21:19:12 +0200
-Subject: [PATCH 18/48] net: dsa: mt7530: Convert to platform remove callback
- returning void
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The .remove() callback for a platform driver returns an int which makes
-many driver authors wrongly assume it's possible to do error handling by
-returning an error code. However the value returned is ignored (apart
-from emitting a warning) and this typically results in resource leaks.
-To improve here there is a quest to make the remove callback return
-void. In the first step of this quest all drivers are converted to
-.remove_new() which already returns void. Eventually after all drivers
-are converted, .remove_new() is renamed to .remove().
-
-Trivially convert this driver from always returning zero in the remove
-callback to the void returning variant.
-
-Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530-mmio.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/net/dsa/mt7530-mmio.c
-+++ b/drivers/net/dsa/mt7530-mmio.c
-@@ -62,15 +62,12 @@ mt7988_probe(struct platform_device *pde
- 	return dsa_register_switch(priv->ds);
- }
- 
--static int
--mt7988_remove(struct platform_device *pdev)
-+static void mt7988_remove(struct platform_device *pdev)
- {
- 	struct mt7530_priv *priv = platform_get_drvdata(pdev);
- 
- 	if (priv)
- 		mt7530_remove_common(priv);
--
--	return 0;
- }
- 
- static void mt7988_shutdown(struct platform_device *pdev)
-@@ -87,7 +84,7 @@ static void mt7988_shutdown(struct platf
- 
- static struct platform_driver mt7988_platform_driver = {
- 	.probe  = mt7988_probe,
--	.remove = mt7988_remove,
-+	.remove_new = mt7988_remove,
- 	.shutdown = mt7988_shutdown,
- 	.driver = {
- 		.name = "mt7530-mmio",
diff --git a/target/linux/generic/backport-6.1/790-19-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch b/target/linux/generic/backport-6.1/790-19-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch
deleted file mode 100644
index d69ee7f104d1..000000000000
--- a/target/linux/generic/backport-6.1/790-19-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 1a1a723d47c046d6c251651c9ade589040dafacf Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Wed, 27 Sep 2023 13:13:56 +0100
-Subject: [PATCH 19/48] net: dsa: mt753x: remove mt753x_phylink_pcs_link_up()
-
-Remove the mt753x_phylink_pcs_link_up() function for two reasons:
-
-1) priv->pcs[i].pcs.neg_mode is set true, meaning it doesn't take a
-   MLO_AN_FIXED anymore, but one of PHYLINK_PCS_NEG_*. However, this
-   is inconsequential due to...
-2) priv->pcs[port].pcs.ops is always initialised to point at
-   mt7530_pcs_ops, which does not have a pcs_link_up() member.
-
-So, let's remove mt753x_phylink_pcs_link_up() entirely.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Link: https://lore.kernel.org/r/E1qlTQS-008BWe-Va@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 11 -----------
- 1 file changed, 11 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3040,15 +3040,6 @@ static void mt753x_phylink_mac_link_down
- 	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
- }
- 
--static void mt753x_phylink_pcs_link_up(struct phylink_pcs *pcs,
--				       unsigned int mode,
--				       phy_interface_t interface,
--				       int speed, int duplex)
--{
--	if (pcs->ops->pcs_link_up)
--		pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex);
--}
--
- static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
- 				       unsigned int mode,
- 				       phy_interface_t interface,
-@@ -3137,8 +3128,6 @@ mt7531_cpu_port_config(struct dsa_switch
- 		return ret;
- 	mt7530_write(priv, MT7530_PMCR_P(port),
- 		     PMCR_CPU_PORT_SETTING(priv->id));
--	mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED,
--				   interface, speed, DUPLEX_FULL);
- 	mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
- 				   speed, DUPLEX_FULL, true, true);
- 
diff --git a/target/linux/generic/backport-6.1/790-20-v6.7-net-dsa-mt7530-replace-deprecated-strncpy-with-ethto.patch b/target/linux/generic/backport-6.1/790-20-v6.7-net-dsa-mt7530-replace-deprecated-strncpy-with-ethto.patch
deleted file mode 100644
index 8af6820270c5..000000000000
--- a/target/linux/generic/backport-6.1/790-20-v6.7-net-dsa-mt7530-replace-deprecated-strncpy-with-ethto.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 51e9c79a4d40fa3a64c0fbdab1ebbebf7cce2dba Mon Sep 17 00:00:00 2001
-From: Justin Stitt <justinstitt@google.com>
-Date: Mon, 9 Oct 2023 18:29:19 +0000
-Subject: [PATCH 20/48] net: dsa: mt7530: replace deprecated strncpy with
- ethtool_sprintf
-
-`strncpy` is deprecated for use on NUL-terminated destination strings
-[1] and as such we should prefer more robust and less ambiguous string
-interfaces.
-
-ethtool_sprintf() is designed specifically for get_strings() usage.
-Let's replace strncpy in favor of this more robust and easier to
-understand interface.
-
-Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
-Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
-Link: https://github.com/KSPP/linux/issues/90
-Signed-off-by: Justin Stitt <justinstitt@google.com>
-Reviewed-by: Kees Cook <keescook@chromium.org>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20231009-strncpy-drivers-net-dsa-mt7530-c-v1-1-ec6677a6436a@google.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -843,8 +843,7 @@ mt7530_get_strings(struct dsa_switch *ds
- 		return;
- 
- 	for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++)
--		strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name,
--			ETH_GSTRING_LEN);
-+		ethtool_sprintf(&data, "%s", mt7530_mib[i].name);
- }
- 
- static void
diff --git a/target/linux/generic/backport-6.1/790-21-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch b/target/linux/generic/backport-6.1/790-21-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch
deleted file mode 100644
index 4c6c0577391e..000000000000
--- a/target/linux/generic/backport-6.1/790-21-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From 38be6fdf7e93431e91aac3884837b22236325f68 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Jan 2024 08:34:31 +0300
-Subject: [PATCH 21/48] net: dsa: mt7530: support OF-based registration of
- switch MDIO bus
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently the MDIO bus of the switches the MT7530 DSA subdriver controls
-can only be registered as non-OF-based. Bring support for registering the
-bus OF-based.
-
-The subdrivers that control switches [with MDIO bus] probed on OF must
-follow this logic to support all cases properly:
-
-No switch MDIO bus defined: Populate ds->user_mii_bus, register the MDIO
-bus, set the interrupts for PHYs if "interrupt-controller" is defined at
-the switch node. This case should only be covered for the switches which
-their dt-bindings documentation didn't document the MDIO bus from the
-start. This is to keep supporting the device trees that do not describe the
-MDIO bus on the device tree but the MDIO bus is being used nonetheless.
-
-Switch MDIO bus defined: Don't populate ds->user_mii_bus, register the MDIO
-bus, set the interrupts for PHYs if ["interrupt-controller" is defined at
-the switch node and "interrupts" is defined at the PHY nodes under the
-switch MDIO bus node].
-
-Switch MDIO bus defined but explicitly disabled: If the device tree says
-status = "disabled" for the MDIO bus, we shouldn't need an MDIO bus at all.
-Instead, just exit as early as possible and do not call any MDIO API.
-
-The use of ds->user_mii_bus is inappropriate when the MDIO bus of the
-switch is described on the device tree [1], which is why we don't populate
-ds->user_mii_bus in that case.
-
-Link: https://lore.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/ [1]
-Suggested-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20240122053431.7751-1-arinc.unal@arinc9.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 34 ++++++++++++++++++++++++++--------
- 1 file changed, 26 insertions(+), 8 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2350,24 +2350,40 @@ mt7530_free_irq_common(struct mt7530_pri
- static void
- mt7530_free_irq(struct mt7530_priv *priv)
- {
--	mt7530_free_mdio_irq(priv);
-+	struct device_node *mnp, *np = priv->dev->of_node;
-+
-+	mnp = of_get_child_by_name(np, "mdio");
-+	if (!mnp)
-+		mt7530_free_mdio_irq(priv);
-+	of_node_put(mnp);
-+
- 	mt7530_free_irq_common(priv);
- }
- 
- static int
- mt7530_setup_mdio(struct mt7530_priv *priv)
- {
-+	struct device_node *mnp, *np = priv->dev->of_node;
- 	struct dsa_switch *ds = priv->ds;
- 	struct device *dev = priv->dev;
- 	struct mii_bus *bus;
- 	static int idx;
--	int ret;
-+	int ret = 0;
-+
-+	mnp = of_get_child_by_name(np, "mdio");
-+
-+	if (mnp && !of_device_is_available(mnp))
-+		goto out;
- 
- 	bus = devm_mdiobus_alloc(dev);
--	if (!bus)
--		return -ENOMEM;
-+	if (!bus) {
-+		ret = -ENOMEM;
-+		goto out;
-+	}
-+
-+	if (!mnp)
-+		ds->slave_mii_bus = bus;
- 
--	ds->slave_mii_bus = bus;
- 	bus->priv = priv;
- 	bus->name = KBUILD_MODNAME "-mii";
- 	snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
-@@ -2376,16 +2392,18 @@ mt7530_setup_mdio(struct mt7530_priv *pr
- 	bus->parent = dev;
- 	bus->phy_mask = ~ds->phys_mii_mask;
- 
--	if (priv->irq)
-+	if (priv->irq && !mnp)
- 		mt7530_setup_mdio_irq(priv);
- 
--	ret = devm_mdiobus_register(dev, bus);
-+	ret = devm_of_mdiobus_register(dev, bus, mnp);
- 	if (ret) {
- 		dev_err(dev, "failed to register MDIO bus: %d\n", ret);
--		if (priv->irq)
-+		if (priv->irq && !mnp)
- 			mt7530_free_mdio_irq(priv);
- 	}
- 
-+out:
-+	of_node_put(mnp);
- 	return ret;
- }
- 
diff --git a/target/linux/generic/backport-6.1/790-22-v6.8-net-dsa-mt7530-fix-10M-100M-speed-on-MT7988-switch.patch b/target/linux/generic/backport-6.1/790-22-v6.8-net-dsa-mt7530-fix-10M-100M-speed-on-MT7988-switch.patch
deleted file mode 100644
index 0b141b4a3f09..000000000000
--- a/target/linux/generic/backport-6.1/790-22-v6.8-net-dsa-mt7530-fix-10M-100M-speed-on-MT7988-switch.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 022a254fafce88367914dfc8168fe687fc528cdb Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 24 Jan 2024 05:17:25 +0000
-Subject: [PATCH 22/48] net: dsa: mt7530: fix 10M/100M speed on MT7988 switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Setup PMCR port register for actual speed and duplex on internally
-connected PHYs of the MT7988 built-in switch. This fixes links with
-speeds other than 1000M.
-
-Fixes: 110c18bfed41 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/a5b04dfa8256d8302f402545a51ac4c626fdba25.1706071272.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3072,8 +3072,7 @@ static void mt753x_phylink_mac_link_up(s
- 	/* MT753x MAC works in 1G full duplex mode for all up-clocked
- 	 * variants.
- 	 */
--	if (interface == PHY_INTERFACE_MODE_INTERNAL ||
--	    interface == PHY_INTERFACE_MODE_TRGMII ||
-+	if (interface == PHY_INTERFACE_MODE_TRGMII ||
- 	    (phy_interface_mode_is_8023z(interface))) {
- 		speed = SPEED_1000;
- 		duplex = DUPLEX_FULL;
diff --git a/target/linux/generic/backport-6.1/790-23-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch b/target/linux/generic/backport-6.1/790-23-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch
deleted file mode 100644
index 44d8e07c12ee..000000000000
--- a/target/linux/generic/backport-6.1/790-23-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From a385398f77fad9eabe7cdc253e1a356484acc316 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Jan 2024 08:35:52 +0300
-Subject: [PATCH 23/48] net: dsa: mt7530: always trap frames to active CPU port
- on MT7530
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On the MT7530 switch, the CPU_PORT field indicates which CPU port to trap
-frames to, regardless of the affinity of the inbound user port.
-
-When multiple CPU ports are in use, if the DSA conduit interface is down,
-trapped frames won't be passed to the conduit interface.
-
-To make trapping frames work including this case, implement
-ds->ops->conduit_state_change() on this subdriver and set the CPU_PORT
-field to the numerically smallest CPU port whose conduit interface is up.
-Introduce the active_cpu_ports field to store the information of the active
-CPU ports. Correct the macros, CPU_PORT is bits 4 through 6 of the
-register.
-
-Add a comment to explain frame trapping for this switch.
-
-Currently, the driver doesn't support the use of multiple CPU ports so this
-is not necessarily a bug fix.
-
-Suggested-by: Vladimir Oltean <olteanv@gmail.com>
-Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-1-042401f2b279@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 35 +++++++++++++++++++++++++++++++----
- drivers/net/dsa/mt7530.h |  6 ++++--
- 2 files changed, 35 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1239,10 +1239,6 @@ mt753x_cpu_port_enable(struct dsa_switch
- 	mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
- 		   UNU_FFP(BIT(port)));
- 
--	/* Set CPU port number */
--	if (priv->id == ID_MT7530 || priv->id == ID_MT7621)
--		mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
--
- 	/* Add the CPU port to the CPU port bitmap for MT7531. Trapped frames
- 	 * will be forwarded to the CPU port that is affine to the inbound user
- 	 * port.
-@@ -3314,6 +3310,36 @@ static int mt753x_set_mac_eee(struct dsa
- 	return 0;
- }
- 
-+static void
-+mt753x_conduit_state_change(struct dsa_switch *ds,
-+			    const struct net_device *conduit,
-+			    bool operational)
-+{
-+	struct dsa_port *cpu_dp = conduit->dsa_ptr;
-+	struct mt7530_priv *priv = ds->priv;
-+	int val = 0;
-+	u8 mask;
-+
-+	/* Set the CPU port to trap frames to for MT7530. Trapped frames will be
-+	 * forwarded to the numerically smallest CPU port whose conduit
-+	 * interface is up.
-+	 */
-+	if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
-+		return;
-+
-+	mask = BIT(cpu_dp->index);
-+
-+	if (operational)
-+		priv->active_cpu_ports |= mask;
-+	else
-+		priv->active_cpu_ports &= ~mask;
-+
-+	if (priv->active_cpu_ports)
-+		val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports));
-+
-+	mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
-+}
-+
- static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
- {
- 	return 0;
-@@ -3369,6 +3395,7 @@ const struct dsa_switch_ops mt7530_switc
- 	.phylink_mac_link_up	= mt753x_phylink_mac_link_up,
- 	.get_mac_eee		= mt753x_get_mac_eee,
- 	.set_mac_eee		= mt753x_set_mac_eee,
-+	.master_state_change	= mt753x_conduit_state_change,
- };
- EXPORT_SYMBOL_GPL(mt7530_switch_ops);
- 
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -45,8 +45,8 @@ enum mt753x_id {
- #define  UNU_FFP(x)			(((x) & 0xff) << 8)
- #define  UNU_FFP_MASK			UNU_FFP(~0)
- #define  CPU_EN				BIT(7)
--#define  CPU_PORT(x)			((x) << 4)
--#define  CPU_MASK			(0xf << 4)
-+#define  CPU_PORT_MASK			GENMASK(6, 4)
-+#define  CPU_PORT(x)			FIELD_PREP(CPU_PORT_MASK, x)
- #define  MIRROR_EN			BIT(3)
- #define  MIRROR_PORT(x)			((x) & 0x7)
- #define  MIRROR_MASK			0x7
-@@ -783,6 +783,7 @@ struct mt753x_info {
-  * @irq_domain:		IRQ domain of the switch irq_chip
-  * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
-  * @create_sgmii:	Pointer to function creating SGMII PCS instance(s)
-+ * @active_cpu_ports:	Holding the active CPU ports
-  */
- struct mt7530_priv {
- 	struct device		*dev;
-@@ -809,6 +810,7 @@ struct mt7530_priv {
- 	struct irq_domain *irq_domain;
- 	u32 irq_enable;
- 	int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
-+	u8 active_cpu_ports;
- };
- 
- struct mt7530_hw_vlan_entry {
diff --git a/target/linux/generic/backport-6.1/790-24-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch b/target/linux/generic/backport-6.1/790-24-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch
deleted file mode 100644
index 3454948b8651..000000000000
--- a/target/linux/generic/backport-6.1/790-24-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From e3c8f69af69e6c4022094309445c009faf5e8cef Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Jan 2024 08:35:53 +0300
-Subject: [PATCH 24/48] net: dsa: mt7530: use p5_interface_select as data type
- for p5_intf_sel
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use the p5_interface_select enumeration as the data type for the
-p5_intf_sel field. This ensures p5_intf_sel can only take the values
-defined in the p5_interface_select enumeration.
-
-Remove the explicit assignment of 0 to P5_DISABLED as the first enum item
-is automatically assigned 0.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-2-042401f2b279@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -713,7 +713,7 @@ struct mt7530_port {
- 
- /* Port 5 interface select definitions */
- enum p5_interface_select {
--	P5_DISABLED = 0,
-+	P5_DISABLED,
- 	P5_INTF_SEL_PHY_P0,
- 	P5_INTF_SEL_PHY_P4,
- 	P5_INTF_SEL_GMAC5,
-@@ -799,7 +799,7 @@ struct mt7530_priv {
- 	bool			mcm;
- 	phy_interface_t		p6_interface;
- 	phy_interface_t		p5_interface;
--	unsigned int		p5_intf_sel;
-+	enum p5_interface_select p5_intf_sel;
- 	u8			mirror_rx;
- 	u8			mirror_tx;
- 	struct mt7530_port	ports[MT7530_NUM_PORTS];
diff --git a/target/linux/generic/backport-6.1/790-25-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch b/target/linux/generic/backport-6.1/790-25-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch
deleted file mode 100644
index 357579e2bdf1..000000000000
--- a/target/linux/generic/backport-6.1/790-25-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From b0d590a5cdd95ed863717b279751d6166083889f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Jan 2024 08:35:54 +0300
-Subject: [PATCH 25/48] net: dsa: mt7530: store port 5 SGMII capability of
- MT7531
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Introduce the p5_sgmii field to store the information for whether port 5
-has got SGMII or not. Instead of reading the MT7531_TOP_SIG_SR register
-multiple times, the register will be read once and the value will be
-stored on the p5_sgmii field. This saves unnecessary reads of the
-register.
-
-Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the
-switch is identified.
-
-Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the
-information. Address the code where mt7531_dual_sgmii_supported() is used.
-
-Get rid of mt7531_is_rgmii_port() which just prints the opposite of
-priv->p5_sgmii.
-
-Instead of calling mt7531_pll_setup() then returning, do not call it if
-port 5 is SGMII.
-
-Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to
-represent the mode that port 5 is being used in, not the hardware
-information of port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if
-port 5 is not dsa_is_unused_port().
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-3-042401f2b279@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530-mdio.c |  7 ++---
- drivers/net/dsa/mt7530.c      | 48 ++++++++++++-----------------------
- drivers/net/dsa/mt7530.h      |  6 +++--
- 3 files changed, 22 insertions(+), 39 deletions(-)
-
---- a/drivers/net/dsa/mt7530-mdio.c
-+++ b/drivers/net/dsa/mt7530-mdio.c
-@@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_re
- };
- 
- static int
--mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
-+mt7531_create_sgmii(struct mt7530_priv *priv)
- {
- 	struct regmap_config *mt7531_pcs_config[2] = {};
- 	struct phylink_pcs *pcs;
- 	struct regmap *regmap;
- 	int i, ret = 0;
- 
--	/* MT7531AE has two SGMII units for port 5 and port 6
--	 * MT7531BE has only one SGMII unit for port 6
--	 */
--	for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
-+	for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) {
- 		mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
- 						    sizeof(struct regmap_config),
- 						    GFP_KERNEL);
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -487,15 +487,6 @@ mt7530_pad_clk_setup(struct dsa_switch *
- 	return 0;
- }
- 
--static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
--{
--	u32 val;
--
--	val = mt7530_read(priv, MT7531_TOP_SIG_SR);
--
--	return (val & PAD_DUAL_SGMII_EN) != 0;
--}
--
- static int
- mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
- {
-@@ -510,9 +501,6 @@ mt7531_pll_setup(struct mt7530_priv *pri
- 	u32 xtal;
- 	u32 val;
- 
--	if (mt7531_dual_sgmii_supported(priv))
--		return;
--
- 	val = mt7530_read(priv, MT7531_CREV);
- 	top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
- 	hwstrap = mt7530_read(priv, MT7531_HWTRAP);
-@@ -927,8 +915,6 @@ static const char *p5_intf_modes(unsigne
- 		return "PHY P4";
- 	case P5_INTF_SEL_GMAC5:
- 		return "GMAC5";
--	case P5_INTF_SEL_GMAC5_SGMII:
--		return "GMAC5_SGMII";
- 	default:
- 		return "unknown";
- 	}
-@@ -2697,6 +2683,12 @@ mt7531_setup(struct dsa_switch *ds)
- 		return -ENODEV;
- 	}
- 
-+	/* MT7531AE has got two SGMII units. One for port 5, one for port 6.
-+	 * MT7531BE has got only one SGMII unit which is for port 6.
-+	 */
-+	val = mt7530_read(priv, MT7531_TOP_SIG_SR);
-+	priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
-+
- 	/* all MACs must be forced link-down before sw reset */
- 	for (i = 0; i < MT7530_NUM_PORTS; i++)
- 		mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
-@@ -2706,21 +2698,18 @@ mt7531_setup(struct dsa_switch *ds)
- 		     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
- 		     SYS_CTRL_REG_RST);
- 
--	mt7531_pll_setup(priv);
--
--	if (mt7531_dual_sgmii_supported(priv)) {
--		priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
--
-+	if (!priv->p5_sgmii) {
-+		mt7531_pll_setup(priv);
-+	} else {
- 		/* Let ds->slave_mii_bus be able to access external phy. */
- 		mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
- 			   MT7531_EXT_P_MDC_11);
- 		mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
- 			   MT7531_EXT_P_MDIO_12);
--	} else {
--		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
- 	}
--	dev_dbg(ds->dev, "P5 support %s interface\n",
--		p5_intf_modes(priv->p5_intf_sel));
-+
-+	if (!dsa_is_unused_port(ds, 5))
-+		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
- 
- 	mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
- 		   MT7531_GPIO0_INTERRUPT);
-@@ -2787,11 +2776,6 @@ static void mt7530_mac_port_get_caps(str
- 	}
- }
- 
--static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
--{
--	return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
--}
--
- static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
- 				     struct phylink_config *config)
- {
-@@ -2804,7 +2788,7 @@ static void mt7531_mac_port_get_caps(str
- 		break;
- 
- 	case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
--		if (mt7531_is_rgmii_port(priv, port)) {
-+		if (!priv->p5_sgmii) {
- 			phy_interface_set_rgmii(config->supported_interfaces);
- 			break;
- 		}
-@@ -2871,7 +2855,7 @@ static int mt7531_rgmii_setup(struct mt7
- {
- 	u32 val;
- 
--	if (!mt7531_is_rgmii_port(priv, port)) {
-+	if (priv->p5_sgmii) {
- 		dev_err(priv->dev, "RGMII mode is not available for port %d\n",
- 			port);
- 		return -EINVAL;
-@@ -3114,7 +3098,7 @@ mt7531_cpu_port_config(struct dsa_switch
- 
- 	switch (port) {
- 	case 5:
--		if (mt7531_is_rgmii_port(priv, port))
-+		if (!priv->p5_sgmii)
- 			interface = PHY_INTERFACE_MODE_RGMII;
- 		else
- 			interface = PHY_INTERFACE_MODE_2500BASEX;
-@@ -3272,7 +3256,7 @@ mt753x_setup(struct dsa_switch *ds)
- 		mt7530_free_irq_common(priv);
- 
- 	if (priv->create_sgmii) {
--		ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
-+		ret = priv->create_sgmii(priv);
- 		if (ret && priv->irq)
- 			mt7530_free_irq(priv);
- 	}
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -717,7 +717,6 @@ enum p5_interface_select {
- 	P5_INTF_SEL_PHY_P0,
- 	P5_INTF_SEL_PHY_P4,
- 	P5_INTF_SEL_GMAC5,
--	P5_INTF_SEL_GMAC5_SGMII,
- };
- 
- struct mt7530_priv;
-@@ -779,6 +778,8 @@ struct mt753x_info {
-  *			registers
-  * @p6_interface	Holding the current port 6 interface
-  * @p5_intf_sel:	Holding the current port 5 interface select
-+ * @p5_sgmii:		Flag for distinguishing if port 5 of the MT7531 switch
-+ *			has got SGMII
-  * @irq:		IRQ number of the switch
-  * @irq_domain:		IRQ domain of the switch irq_chip
-  * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
-@@ -800,6 +801,7 @@ struct mt7530_priv {
- 	phy_interface_t		p6_interface;
- 	phy_interface_t		p5_interface;
- 	enum p5_interface_select p5_intf_sel;
-+	bool			p5_sgmii;
- 	u8			mirror_rx;
- 	u8			mirror_tx;
- 	struct mt7530_port	ports[MT7530_NUM_PORTS];
-@@ -809,7 +811,7 @@ struct mt7530_priv {
- 	int irq;
- 	struct irq_domain *irq_domain;
- 	u32 irq_enable;
--	int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
-+	int (*create_sgmii)(struct mt7530_priv *priv);
- 	u8 active_cpu_ports;
- };
- 
diff --git a/target/linux/generic/backport-6.1/790-26-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch b/target/linux/generic/backport-6.1/790-26-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch
deleted file mode 100644
index 46dbd53ede48..000000000000
--- a/target/linux/generic/backport-6.1/790-26-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From 0dcde4c1e7c47822a6b00d6f96b7f19e51536026 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Jan 2024 08:35:55 +0300
-Subject: [PATCH 26/48] net: dsa: mt7530: improve comments regarding switch
- ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There's no logic to numerically order the CPU ports. Just state the port
-number instead.
-
-Remove the irrelevant PHY muxing information from
-mt7530_mac_port_get_caps(). Explain the supported MII modes instead.
-
-Remove the out of place PHY muxing information from
-mt753x_phylink_mac_config(). The function is for MT7530, MT7531, and the
-switch on the MT7988 SoC but there's no PHY muxing on MT7531 or the switch
-on the MT7988 SoC.
-
-These comments were gradually introduced with the commits below.
-commit ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK API")
-commit 38f790a80560 ("net: dsa: mt7530: Add support for port 5")
-commit 88bdef8be9f6 ("net: dsa: mt7530: Extend device data ready for adding
-a new hardware")
-commit c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-4-042401f2b279@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 30 ++++++++++++++++++++----------
- 1 file changed, 20 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2754,12 +2754,14 @@ static void mt7530_mac_port_get_caps(str
- 				     struct phylink_config *config)
- {
- 	switch (port) {
--	case 0 ... 4: /* Internal phy */
-+	/* Ports which are connected to switch PHYs. There is no MII pinout. */
-+	case 0 ... 4:
- 		__set_bit(PHY_INTERFACE_MODE_GMII,
- 			  config->supported_interfaces);
- 		break;
- 
--	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
-+	/* Port 5 supports rgmii with delays, mii, and gmii. */
-+	case 5:
- 		phy_interface_set_rgmii(config->supported_interfaces);
- 		__set_bit(PHY_INTERFACE_MODE_MII,
- 			  config->supported_interfaces);
-@@ -2767,7 +2769,8 @@ static void mt7530_mac_port_get_caps(str
- 			  config->supported_interfaces);
- 		break;
- 
--	case 6: /* 1st cpu port */
-+	/* Port 6 supports rgmii and trgmii. */
-+	case 6:
- 		__set_bit(PHY_INTERFACE_MODE_RGMII,
- 			  config->supported_interfaces);
- 		__set_bit(PHY_INTERFACE_MODE_TRGMII,
-@@ -2782,19 +2785,24 @@ static void mt7531_mac_port_get_caps(str
- 	struct mt7530_priv *priv = ds->priv;
- 
- 	switch (port) {
--	case 0 ... 4: /* Internal phy */
-+	/* Ports which are connected to switch PHYs. There is no MII pinout. */
-+	case 0 ... 4:
- 		__set_bit(PHY_INTERFACE_MODE_GMII,
- 			  config->supported_interfaces);
- 		break;
- 
--	case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
-+	/* Port 5 supports rgmii with delays on MT7531BE, sgmii/802.3z on
-+	 * MT7531AE.
-+	 */
-+	case 5:
- 		if (!priv->p5_sgmii) {
- 			phy_interface_set_rgmii(config->supported_interfaces);
- 			break;
- 		}
- 		fallthrough;
- 
--	case 6: /* 1st cpu port supports sgmii/8023z only */
-+	/* Port 6 supports sgmii/802.3z. */
-+	case 6:
- 		__set_bit(PHY_INTERFACE_MODE_SGMII,
- 			  config->supported_interfaces);
- 		__set_bit(PHY_INTERFACE_MODE_1000BASEX,
-@@ -2813,11 +2821,13 @@ static void mt7988_mac_port_get_caps(str
- 	phy_interface_zero(config->supported_interfaces);
- 
- 	switch (port) {
--	case 0 ... 4: /* Internal phy */
-+	/* Ports which are connected to switch PHYs. There is no MII pinout. */
-+	case 0 ... 4:
- 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
- 			  config->supported_interfaces);
- 		break;
- 
-+	/* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
- 	case 6:
- 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
- 			  config->supported_interfaces);
-@@ -2981,12 +2991,12 @@ mt753x_phylink_mac_config(struct dsa_swi
- 	u32 mcr_cur, mcr_new;
- 
- 	switch (port) {
--	case 0 ... 4: /* Internal phy */
-+	case 0 ... 4:
- 		if (state->interface != PHY_INTERFACE_MODE_GMII &&
- 		    state->interface != PHY_INTERFACE_MODE_INTERNAL)
- 			goto unsupported;
- 		break;
--	case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
-+	case 5:
- 		if (priv->p5_interface == state->interface)
- 			break;
- 
-@@ -2996,7 +3006,7 @@ mt753x_phylink_mac_config(struct dsa_swi
- 		if (priv->p5_intf_sel != P5_DISABLED)
- 			priv->p5_interface = state->interface;
- 		break;
--	case 6: /* 1st cpu port */
-+	case 6:
- 		if (priv->p6_interface == state->interface)
- 			break;
- 
diff --git a/target/linux/generic/backport-6.1/790-27-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch b/target/linux/generic/backport-6.1/790-27-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch
deleted file mode 100644
index 43f629b2431d..000000000000
--- a/target/linux/generic/backport-6.1/790-27-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 0f03d9bfa1da1d26cb950e4b35b1ff7b9be1828f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Jan 2024 08:35:56 +0300
-Subject: [PATCH 27/48] net: dsa: mt7530: improve code path for setting up port
- 5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There're two code paths for setting up port 5:
-
-mt7530_setup()
--> mt7530_setup_port5()
-
-mt753x_phylink_mac_config()
--> mt753x_mac_config()
-   -> mt7530_mac_config()
-      -> mt7530_setup_port5()
-
-Currently mt7530_setup_port5() from mt7530_setup() always runs. If port 5
-is used as a CPU, DSA, or user port, mt7530_setup_port5() from
-mt753x_phylink_mac_config() won't run. That is because priv->p5_interface
-set on mt7530_setup_port5() will match state->interface on
-mt753x_phylink_mac_config() which will stop running mt7530_setup_port5()
-again.
-
-Therefore, mt7530_setup_port5() will never run from
-mt753x_phylink_mac_config().
-
-Address this by not running mt7530_setup_port5() from mt7530_setup() if
-port 5 is used as a CPU, DSA, or user port. This driver isn't in the
-dsa_switches_apply_workarounds[] array so phylink will always be present.
-
-To keep the cases where port 5 isn't controlled by phylink working as
-before, preserve the mt7530_setup_port5() call from mt7530_setup().
-
-Do not set priv->p5_intf_sel to P5_DISABLED. It is already set to that when
-"priv" is allocated.
-
-Move setting the interface to a more specific location. It's supposed to be
-overwritten if PHY muxing is detected.
-
-Improve the comment which explains the process.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-5-042401f2b279@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 17 ++++++++---------
- 1 file changed, 8 insertions(+), 9 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2532,16 +2532,15 @@ mt7530_setup(struct dsa_switch *ds)
- 		return ret;
- 
- 	/* Setup port 5 */
--	priv->p5_intf_sel = P5_DISABLED;
--	interface = PHY_INTERFACE_MODE_NA;
--
- 	if (!dsa_is_unused_port(ds, 5)) {
- 		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
--		ret = of_get_phy_mode(dsa_to_port(ds, 5)->dn, &interface);
--		if (ret && ret != -ENODEV)
--			return ret;
- 	} else {
--		/* Scan the ethernet nodes. look for GMAC1, lookup used phy */
-+		/* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY.
-+		 * Set priv->p5_intf_sel to the appropriate value if PHY muxing
-+		 * is detected.
-+		 */
-+		interface = PHY_INTERFACE_MODE_NA;
-+
- 		for_each_child_of_node(dn, mac_np) {
- 			if (!of_device_is_compatible(mac_np,
- 						     "mediatek,eth-mac"))
-@@ -2572,6 +2571,8 @@ mt7530_setup(struct dsa_switch *ds)
- 			of_node_put(phy_node);
- 			break;
- 		}
-+
-+		mt7530_setup_port5(ds, interface);
- 	}
- 
- #ifdef CONFIG_GPIOLIB
-@@ -2582,8 +2583,6 @@ mt7530_setup(struct dsa_switch *ds)
- 	}
- #endif /* CONFIG_GPIOLIB */
- 
--	mt7530_setup_port5(ds, interface);
--
- 	/* Flush the FDB table */
- 	ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
- 	if (ret < 0)
diff --git a/target/linux/generic/backport-6.1/790-28-v6.9-net-dsa-mt7530-do-not-set-priv-p5_interface-on-mt753.patch b/target/linux/generic/backport-6.1/790-28-v6.9-net-dsa-mt7530-do-not-set-priv-p5_interface-on-mt753.patch
deleted file mode 100644
index 385d587729ee..000000000000
--- a/target/linux/generic/backport-6.1/790-28-v6.9-net-dsa-mt7530-do-not-set-priv-p5_interface-on-mt753.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 120581c81ad19704a9325505c83a82b7e760e96e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Jan 2024 08:35:57 +0300
-Subject: [PATCH 28/48] net: dsa: mt7530: do not set priv->p5_interface on
- mt7530_setup_port5()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Running mt7530_setup_port5() from mt7530_setup() used to handle all cases
-of configuring port 5, including phylink.
-
-Setting priv->p5_interface under mt7530_setup_port5() makes sure that
-mt7530_setup_port5() from mt753x_phylink_mac_config() won't run.
-
-The commit ("net: dsa: mt7530: improve code path for setting up port 5")
-makes so that mt7530_setup_port5() from mt7530_setup() runs only on
-non-phylink cases.
-
-Get rid of unnecessarily setting priv->p5_interface under
-mt7530_setup_port5() as port 5 phylink configuration will be done by
-running mt7530_setup_port5() from mt753x_phylink_mac_config() now.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-6-042401f2b279@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -985,8 +985,6 @@ static void mt7530_setup_port5(struct ds
- 	dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
- 		val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
- 
--	priv->p5_interface = interface;
--
- unlock_exit:
- 	mutex_unlock(&priv->reg_mutex);
- }
diff --git a/target/linux/generic/backport-6.1/790-29-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch b/target/linux/generic/backport-6.1/790-29-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch
deleted file mode 100644
index b4c0b75c49c7..000000000000
--- a/target/linux/generic/backport-6.1/790-29-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 3b423061eb3a62e59b57939ae1e1234756a0f6a1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Jan 2024 08:35:58 +0300
-Subject: [PATCH 29/48] net: dsa: mt7530: do not run mt7530_setup_port5() if
- port 5 is disabled
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There's no need to run all the code on mt7530_setup_port5() if port 5 is
-disabled. The only case for calling mt7530_setup_port5() from
-mt7530_setup() is when PHY muxing is enabled. That is because port 5 is not
-defined as a port on the devicetree, therefore, it cannot be controlled by
-phylink.
-
-Because of this, run mt7530_setup_port5() if priv->p5_intf_sel is
-P5_INTF_SEL_PHY_P0 or P5_INTF_SEL_PHY_P4. Remove the P5_DISABLED case from
-mt7530_setup_port5().
-
-Stop initialising the interface variable as the remaining cases will always
-call mt7530_setup_port5() with it initialised.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-7-042401f2b279@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 9 +++------
- 1 file changed, 3 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -949,9 +949,6 @@ static void mt7530_setup_port5(struct ds
- 		/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
- 		val &= ~MHWTRAP_P5_DIS;
- 		break;
--	case P5_DISABLED:
--		interface = PHY_INTERFACE_MODE_NA;
--		break;
- 	default:
- 		dev_err(ds->dev, "Unsupported p5_intf_sel %d\n",
- 			priv->p5_intf_sel);
-@@ -2537,8 +2534,6 @@ mt7530_setup(struct dsa_switch *ds)
- 		 * Set priv->p5_intf_sel to the appropriate value if PHY muxing
- 		 * is detected.
- 		 */
--		interface = PHY_INTERFACE_MODE_NA;
--
- 		for_each_child_of_node(dn, mac_np) {
- 			if (!of_device_is_compatible(mac_np,
- 						     "mediatek,eth-mac"))
-@@ -2570,7 +2565,9 @@ mt7530_setup(struct dsa_switch *ds)
- 			break;
- 		}
- 
--		mt7530_setup_port5(ds, interface);
-+		if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 ||
-+		    priv->p5_intf_sel == P5_INTF_SEL_PHY_P4)
-+			mt7530_setup_port5(ds, interface);
- 	}
- 
- #ifdef CONFIG_GPIOLIB
diff --git a/target/linux/generic/backport-6.1/790-30-v6.9-net-dsa-mt7530-empty-default-case-on-mt7530_setup_po.patch b/target/linux/generic/backport-6.1/790-30-v6.9-net-dsa-mt7530-empty-default-case-on-mt7530_setup_po.patch
deleted file mode 100644
index 89527e2b39a3..000000000000
--- a/target/linux/generic/backport-6.1/790-30-v6.9-net-dsa-mt7530-empty-default-case-on-mt7530_setup_po.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 959f4ac4940bebb84bdd25ac61470b3965e1e475 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Tue, 6 Feb 2024 01:08:02 +0300
-Subject: [PATCH 30/48] net: dsa: mt7530: empty default case on
- mt7530_setup_port5()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There're two code paths for setting up port 5:
-
-mt7530_setup()
--> mt7530_setup_port5()
-
-mt753x_phylink_mac_config()
--> mt753x_mac_config()
-   -> mt7530_mac_config()
-      -> mt7530_setup_port5()
-
-On the first code path, priv->p5_intf_sel is either set to
-P5_INTF_SEL_PHY_P0 or P5_INTF_SEL_PHY_P4 when mt7530_setup_port5() is run.
-
-On the second code path, priv->p5_intf_sel is set to P5_INTF_SEL_GMAC5 when
-mt7530_setup_port5() is run.
-
-Empty the default case which will never run but is needed nonetheless to
-handle all the remaining enumeration values.
-
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-1-d7d92a185cb1@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 5 +----
- 1 file changed, 1 insertion(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -950,9 +950,7 @@ static void mt7530_setup_port5(struct ds
- 		val &= ~MHWTRAP_P5_DIS;
- 		break;
- 	default:
--		dev_err(ds->dev, "Unsupported p5_intf_sel %d\n",
--			priv->p5_intf_sel);
--		goto unlock_exit;
-+		break;
- 	}
- 
- 	/* Setup RGMII settings */
-@@ -982,7 +980,6 @@ static void mt7530_setup_port5(struct ds
- 	dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
- 		val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
- 
--unlock_exit:
- 	mutex_unlock(&priv->reg_mutex);
- }
- 
diff --git a/target/linux/generic/backport-6.1/790-31-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch b/target/linux/generic/backport-6.1/790-31-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch
deleted file mode 100644
index 0dc4baf0c76a..000000000000
--- a/target/linux/generic/backport-6.1/790-31-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 9ec0a800c8e0850e1358b7402d6af557af81cb38 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Tue, 6 Feb 2024 01:08:03 +0300
-Subject: [PATCH 31/48] net: dsa: mt7530: move XTAL check to mt7530_setup()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The crystal frequency concerns the switch core. The frequency should be
-checked when the switch is being set up so the driver can reject the
-unsupported hardware earlier and without requiring port 6 to be used.
-
-Move it to mt7530_setup(). Drop the unnecessary function printing.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-2-d7d92a185cb1@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 13 ++++++-------
- 1 file changed, 6 insertions(+), 7 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -422,13 +422,6 @@ mt7530_pad_clk_setup(struct dsa_switch *
- 
- 	xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
- 
--	if (xtal == HWTRAP_XTAL_20MHZ) {
--		dev_err(priv->dev,
--			"%s: MT7530 with a 20MHz XTAL is not supported!\n",
--			__func__);
--		return -EINVAL;
--	}
--
- 	switch (interface) {
- 	case PHY_INTERFACE_MODE_RGMII:
- 		trgint = 0;
-@@ -2461,6 +2454,12 @@ mt7530_setup(struct dsa_switch *ds)
- 		return -ENODEV;
- 	}
- 
-+	if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) {
-+		dev_err(priv->dev,
-+			"MT7530 with a 20MHz XTAL is not supported!\n");
-+		return -EINVAL;
-+	}
-+
- 	/* Reset the switch through internal reset */
- 	mt7530_write(priv, MT7530_SYS_CTRL,
- 		     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
diff --git a/target/linux/generic/backport-6.1/790-32-v6.9-net-dsa-mt7530-simplify-mt7530_pad_clk_setup.patch b/target/linux/generic/backport-6.1/790-32-v6.9-net-dsa-mt7530-simplify-mt7530_pad_clk_setup.patch
deleted file mode 100644
index 46e1b50f246e..000000000000
--- a/target/linux/generic/backport-6.1/790-32-v6.9-net-dsa-mt7530-simplify-mt7530_pad_clk_setup.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From 7199c736aa8cd9c69ae681a9c733408372c2ce76 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Tue, 6 Feb 2024 01:08:04 +0300
-Subject: [PATCH 32/48] net: dsa: mt7530: simplify mt7530_pad_clk_setup()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This code is from before this driver was converted to phylink API. Phylink
-deals with the unsupported interface cases before mt7530_pad_clk_setup() is
-run. Therefore, the default case would never run. However, it must be
-defined nonetheless to handle all the remaining enumeration values, the
-phy-modes.
-
-Switch to if statement for RGMII and return which simplifies the code and
-saves an indent.
-
-Set P6_INTF_MODE, which is the three least significant bits of the
-MT7530_P6ECR register, to 0 for RGMII even though it will already be 0
-after reset. This is to keep supporting dynamic reconfiguration of the port
-in the case the interface changes from TRGMII to RGMII.
-
-Disable the TRGMII clocks for all cases. They will be enabled if TRGMII is
-being used.
-
-Read XTAL after checking for RGMII as it's only needed for the TRGMII
-interface mode.
-
-Reviewed-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-3-d7d92a185cb1@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 91 ++++++++++++++++++----------------------
- 1 file changed, 40 insertions(+), 51 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -418,65 +418,54 @@ static int
- mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
- {
- 	struct mt7530_priv *priv = ds->priv;
--	u32 ncpo1, ssc_delta, trgint, xtal;
-+	u32 ncpo1, ssc_delta, xtal;
- 
--	xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
-+	/* Disable the MT7530 TRGMII clocks */
-+	core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
- 
--	switch (interface) {
--	case PHY_INTERFACE_MODE_RGMII:
--		trgint = 0;
--		break;
--	case PHY_INTERFACE_MODE_TRGMII:
--		trgint = 1;
--		if (xtal == HWTRAP_XTAL_25MHZ)
--			ssc_delta = 0x57;
--		else
--			ssc_delta = 0x87;
--		if (priv->id == ID_MT7621) {
--			/* PLL frequency: 125MHz: 1.0GBit */
--			if (xtal == HWTRAP_XTAL_40MHZ)
--				ncpo1 = 0x0640;
--			if (xtal == HWTRAP_XTAL_25MHZ)
--				ncpo1 = 0x0a00;
--		} else { /* PLL frequency: 250MHz: 2.0Gbit */
--			if (xtal == HWTRAP_XTAL_40MHZ)
--				ncpo1 = 0x0c80;
--			if (xtal == HWTRAP_XTAL_25MHZ)
--				ncpo1 = 0x1400;
--		}
--		break;
--	default:
--		dev_err(priv->dev, "xMII interface %d not supported\n",
--			interface);
--		return -EINVAL;
-+	if (interface == PHY_INTERFACE_MODE_RGMII) {
-+		mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
-+			   P6_INTF_MODE(0));
-+		return 0;
- 	}
- 
--	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
--		   P6_INTF_MODE(trgint));
-+	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
- 
--	if (trgint) {
--		/* Disable the MT7530 TRGMII clocks */
--		core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
--
--		/* Setup the MT7530 TRGMII Tx Clock */
--		core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
--		core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
--		core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
--		core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
--		core_write(priv, CORE_PLL_GROUP4,
--			   RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
--			   RG_SYSPLL_BIAS_LPF_EN);
--		core_write(priv, CORE_PLL_GROUP2,
--			   RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
--			   RG_SYSPLL_POSDIV(1));
--		core_write(priv, CORE_PLL_GROUP7,
--			   RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
--			   RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
-+	xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
- 
--		/* Enable the MT7530 TRGMII clocks */
--		core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
-+	if (xtal == HWTRAP_XTAL_25MHZ)
-+		ssc_delta = 0x57;
-+	else
-+		ssc_delta = 0x87;
-+
-+	if (priv->id == ID_MT7621) {
-+		/* PLL frequency: 125MHz: 1.0GBit */
-+		if (xtal == HWTRAP_XTAL_40MHZ)
-+			ncpo1 = 0x0640;
-+		if (xtal == HWTRAP_XTAL_25MHZ)
-+			ncpo1 = 0x0a00;
-+	} else { /* PLL frequency: 250MHz: 2.0Gbit */
-+		if (xtal == HWTRAP_XTAL_40MHZ)
-+			ncpo1 = 0x0c80;
-+		if (xtal == HWTRAP_XTAL_25MHZ)
-+			ncpo1 = 0x1400;
- 	}
- 
-+	/* Setup the MT7530 TRGMII Tx Clock */
-+	core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
-+	core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
-+	core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
-+	core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
-+	core_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN |
-+		   RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN);
-+	core_write(priv, CORE_PLL_GROUP2, RG_SYSPLL_EN_NORMAL |
-+		   RG_SYSPLL_VODEN | RG_SYSPLL_POSDIV(1));
-+	core_write(priv, CORE_PLL_GROUP7, RG_LCDDS_PCW_NCPO_CHG |
-+		   RG_LCCDS_C(3) | RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
-+
-+	/* Enable the MT7530 TRGMII clocks */
-+	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-6.1/790-33-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch b/target/linux/generic/backport-6.1/790-33-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch
deleted file mode 100644
index 7d78b7df70ec..000000000000
--- a/target/linux/generic/backport-6.1/790-33-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 921a7deee767aa157b5372863a4c1cac53e5c53a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Tue, 6 Feb 2024 01:08:05 +0300
-Subject: [PATCH 33/48] net: dsa: mt7530: call port 6 setup from
- mt7530_mac_config()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-mt7530_pad_clk_setup() is called if port 6 is enabled. It used to do more
-things than setting up port 6. That part was moved to more appropriate
-locations, mt7530_setup() and mt7530_pll_setup().
-
-Now that all it does is set up port 6, rename it to mt7530_setup_port6(),
-and move it to a more appropriate location, under mt7530_mac_config().
-
-Change mt7530_setup_port6() to void as there're no error cases.
-
-Leave an empty mt7530_pad_clk_setup() to satisfy the pad_setup function
-pointer.
-
-This is the code path for setting up the ports before:
-
-dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config()
--> mt753x_mac_config()
-   -> mt753x_info :: mac_port_config() -> mt7530_mac_config()
-      -> mt7530_setup_port5()
--> mt753x_pad_setup()
-   -> mt753x_info :: pad_setup() -> mt7530_pad_clk_setup()
-
-This is after:
-
-dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config()
--> mt753x_mac_config()
-   -> mt753x_info :: mac_port_config() -> mt7530_mac_config()
-      -> mt7530_setup_port5()
-      -> mt7530_setup_port6()
-
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-4-d7d92a185cb1@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 19 +++++++++++--------
- 1 file changed, 11 insertions(+), 8 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -414,8 +414,8 @@ mt753x_preferred_default_local_cpu_port(
- }
- 
- /* Setup port 6 interface mode and TRGMII TX circuit */
--static int
--mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
-+static void
-+mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
- {
- 	struct mt7530_priv *priv = ds->priv;
- 	u32 ncpo1, ssc_delta, xtal;
-@@ -426,7 +426,7 @@ mt7530_pad_clk_setup(struct dsa_switch *
- 	if (interface == PHY_INTERFACE_MODE_RGMII) {
- 		mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
- 			   P6_INTF_MODE(0));
--		return 0;
-+		return;
- 	}
- 
- 	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
-@@ -465,7 +465,11 @@ mt7530_pad_clk_setup(struct dsa_switch *
- 
- 	/* Enable the MT7530 TRGMII clocks */
- 	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
-+}
- 
-+static int
-+mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
-+{
- 	return 0;
- }
- 
-@@ -2829,11 +2833,10 @@ mt7530_mac_config(struct dsa_switch *ds,
- {
- 	struct mt7530_priv *priv = ds->priv;
- 
--	/* Only need to setup port5. */
--	if (port != 5)
--		return 0;
--
--	mt7530_setup_port5(priv->ds, interface);
-+	if (port == 5)
-+		mt7530_setup_port5(priv->ds, interface);
-+	else if (port == 6)
-+		mt7530_setup_port6(priv->ds, interface);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-6.1/790-34-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch b/target/linux/generic/backport-6.1/790-34-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch
deleted file mode 100644
index 725830e769d6..000000000000
--- a/target/linux/generic/backport-6.1/790-34-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From fcbc5d900fa53f79963fe4626069739ee5567b4b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Tue, 6 Feb 2024 01:08:06 +0300
-Subject: [PATCH 34/48] net: dsa: mt7530: remove pad_setup function pointer
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The pad_setup function pointer was introduced with 88bdef8be9f6 ("net: dsa:
-mt7530: Extend device data ready for adding a new hardware"). It was being
-used to set up the core clock and port 6 of the MT7530 switch, and pll of
-the MT7531 switch.
-
-All of these were moved to more appropriate locations, and it was never
-used for the switch on the MT7988 SoC. Therefore, this function pointer
-hasn't got a use anymore. Remove it.
-
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-5-d7d92a185cb1@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 36 ++----------------------------------
- drivers/net/dsa/mt7530.h |  3 ---
- 2 files changed, 2 insertions(+), 37 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -467,18 +467,6 @@ mt7530_setup_port6(struct dsa_switch *ds
- 	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
- }
- 
--static int
--mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
--{
--	return 0;
--}
--
--static int
--mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
--{
--	return 0;
--}
--
- static void
- mt7531_pll_setup(struct mt7530_priv *priv)
- {
-@@ -2820,14 +2808,6 @@ static void mt7988_mac_port_get_caps(str
- }
- 
- static int
--mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
--{
--	struct mt7530_priv *priv = ds->priv;
--
--	return priv->info->pad_setup(ds, state->interface);
--}
--
--static int
- mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
- 		  phy_interface_t interface)
- {
-@@ -2992,8 +2972,6 @@ mt753x_phylink_mac_config(struct dsa_swi
- 		if (priv->p6_interface == state->interface)
- 			break;
- 
--		mt753x_pad_setup(ds, state);
--
- 		if (mt753x_mac_config(ds, port, mode, state) < 0)
- 			goto unsupported;
- 
-@@ -3316,11 +3294,6 @@ mt753x_conduit_state_change(struct dsa_s
- 	mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
- }
- 
--static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
--{
--	return 0;
--}
--
- static int mt7988_setup(struct dsa_switch *ds)
- {
- 	struct mt7530_priv *priv = ds->priv;
-@@ -3382,7 +3355,6 @@ const struct mt753x_info mt753x_table[]
- 		.sw_setup = mt7530_setup,
- 		.phy_read = mt7530_phy_read,
- 		.phy_write = mt7530_phy_write,
--		.pad_setup = mt7530_pad_clk_setup,
- 		.mac_port_get_caps = mt7530_mac_port_get_caps,
- 		.mac_port_config = mt7530_mac_config,
- 	},
-@@ -3392,7 +3364,6 @@ const struct mt753x_info mt753x_table[]
- 		.sw_setup = mt7530_setup,
- 		.phy_read = mt7530_phy_read,
- 		.phy_write = mt7530_phy_write,
--		.pad_setup = mt7530_pad_clk_setup,
- 		.mac_port_get_caps = mt7530_mac_port_get_caps,
- 		.mac_port_config = mt7530_mac_config,
- 	},
-@@ -3402,7 +3373,6 @@ const struct mt753x_info mt753x_table[]
- 		.sw_setup = mt7531_setup,
- 		.phy_read = mt7531_ind_phy_read,
- 		.phy_write = mt7531_ind_phy_write,
--		.pad_setup = mt7531_pad_setup,
- 		.cpu_port_config = mt7531_cpu_port_config,
- 		.mac_port_get_caps = mt7531_mac_port_get_caps,
- 		.mac_port_config = mt7531_mac_config,
-@@ -3413,7 +3383,6 @@ const struct mt753x_info mt753x_table[]
- 		.sw_setup = mt7988_setup,
- 		.phy_read = mt7531_ind_phy_read,
- 		.phy_write = mt7531_ind_phy_write,
--		.pad_setup = mt7988_pad_setup,
- 		.cpu_port_config = mt7988_cpu_port_config,
- 		.mac_port_get_caps = mt7988_mac_port_get_caps,
- 		.mac_port_config = mt7988_mac_config,
-@@ -3443,9 +3412,8 @@ mt7530_probe_common(struct mt7530_priv *
- 	/* Sanity check if these required device operations are filled
- 	 * properly.
- 	 */
--	if (!priv->info->sw_setup || !priv->info->pad_setup ||
--	    !priv->info->phy_read || !priv->info->phy_write ||
--	    !priv->info->mac_port_get_caps ||
-+	if (!priv->info->sw_setup || !priv->info->phy_read ||
-+	    !priv->info->phy_write || !priv->info->mac_port_get_caps ||
- 	    !priv->info->mac_port_config)
- 		return -EINVAL;
- 
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -732,8 +732,6 @@ struct mt753x_pcs {
-  * @sw_setup:		Holding the handler to a device initialization
-  * @phy_read:		Holding the way reading PHY port
-  * @phy_write:		Holding the way writing PHY port
-- * @pad_setup:		Holding the way setting up the bus pad for a certain
-- *			MAC port
-  * @phy_mode_supported:	Check if the PHY type is being supported on a certain
-  *			port
-  * @mac_port_validate:	Holding the way to set addition validate type for a
-@@ -749,7 +747,6 @@ struct mt753x_info {
- 	int (*sw_setup)(struct dsa_switch *ds);
- 	int (*phy_read)(struct mt7530_priv *priv, int port, int regnum);
- 	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
--	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
- 	int (*cpu_port_config)(struct dsa_switch *ds, int port);
- 	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
- 				  struct phylink_config *config);
diff --git a/target/linux/generic/backport-6.1/790-35-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch b/target/linux/generic/backport-6.1/790-35-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch
deleted file mode 100644
index 606c48234c18..000000000000
--- a/target/linux/generic/backport-6.1/790-35-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 58a94eb63233bb2ede13b183b6a6a03aa0a2dfc3 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Tue, 6 Feb 2024 01:08:07 +0300
-Subject: [PATCH 35/48] net: dsa: mt7530: correct port capabilities of MT7988
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On the switch on the MT7988 SoC, as shown in Block Diagram 8.1.1.3 on page
-125 of "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open
-Version) v0.1", there are only 4 PHYs. That's port 0 to 3. Set the case for
-ports which connect to switch PHYs to '0 ... 3'.
-
-Port 4 and 5 are not used at all in this design.
-
-Link: https://wiki.banana-pi.org/Banana_Pi_BPI-R4#Documents [1]
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-6-d7d92a185cb1@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2793,7 +2793,7 @@ static void mt7988_mac_port_get_caps(str
- 
- 	switch (port) {
- 	/* Ports which are connected to switch PHYs. There is no MII pinout. */
--	case 0 ... 4:
-+	case 0 ... 3:
- 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
- 			  config->supported_interfaces);
- 		break;
diff --git a/target/linux/generic/backport-6.1/790-36-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch b/target/linux/generic/backport-6.1/790-36-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch
deleted file mode 100644
index e2f1f23435cc..000000000000
--- a/target/linux/generic/backport-6.1/790-36-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4440ce33074be6bd55d1a0c8b5f4b6d433ae2c74 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Tue, 6 Feb 2024 01:08:08 +0300
-Subject: [PATCH 36/48] net: dsa: mt7530: do not clear
- config->supported_interfaces
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There's no need to clear the config->supported_interfaces bitmap before
-reporting the supported interfaces as all bits in the bitmap will already
-be initialized to zero when the phylink_config structure is allocated. The
-"config" pointer points to &dp->phylink_config, and "dp" is allocated by
-dsa_port_touch() with kzalloc(), so all its fields are filled with zeroes.
-
-There's no code that would change the bitmap beforehand. Remove it.
-
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-7-d7d92a185cb1@arinc9.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mt7530.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2789,8 +2789,6 @@ static void mt7531_mac_port_get_caps(str
- static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
- 				     struct phylink_config *config)
- {
--	phy_interface_zero(config->supported_interfaces);
--
- 	switch (port) {
- 	/* Ports which are connected to switch PHYs. There is no MII pinout. */
- 	case 0 ... 3:
diff --git a/target/linux/generic/backport-6.1/790-37-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch b/target/linux/generic/backport-6.1/790-37-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch
deleted file mode 100644
index be6fe39f38ff..000000000000
--- a/target/linux/generic/backport-6.1/790-37-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 2f507aaeb1a12044f2376a255c2afff1f7432b0b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Mar 2024 12:42:57 +0200
-Subject: [PATCH 37/48] net: dsa: mt7530: remove .mac_port_config for MT7988
- and make it optional
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-For the switch on the MT7988 SoC, the mac_port_config member for ID_MT7988
-in mt753x_table is not needed as the interfaces of all MACs are already
-handled on mt7988_mac_port_get_caps().
-
-Therefore, remove the mac_port_config member from ID_MT7988 in
-mt753x_table. Before calling priv->info->mac_port_config(), if there's no
-mac_port_config member in mt753x_table, exit mt753x_mac_config()
-successfully.
-
-Remove calling priv->info->mac_port_config() from the sanity check as the
-sanity check requires a pointer to a mac_port_config function to be
-non-NULL. This will fail for MT7988 as mac_port_config won't be a member of
-its info table.
-
-Co-developed-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 18 ++++--------------
- 1 file changed, 4 insertions(+), 14 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2872,17 +2872,6 @@ static bool mt753x_is_mac_port(u32 port)
- }
- 
- static int
--mt7988_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
--		  phy_interface_t interface)
--{
--	if (dsa_is_cpu_port(ds, port) &&
--	    interface == PHY_INTERFACE_MODE_INTERNAL)
--		return 0;
--
--	return -EINVAL;
--}
--
--static int
- mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
- 		  phy_interface_t interface)
- {
-@@ -2922,6 +2911,9 @@ mt753x_mac_config(struct dsa_switch *ds,
- {
- 	struct mt7530_priv *priv = ds->priv;
- 
-+	if (!priv->info->mac_port_config)
-+		return 0;
-+
- 	return priv->info->mac_port_config(ds, port, mode, state->interface);
- }
- 
-@@ -3383,7 +3375,6 @@ const struct mt753x_info mt753x_table[]
- 		.phy_write = mt7531_ind_phy_write,
- 		.cpu_port_config = mt7988_cpu_port_config,
- 		.mac_port_get_caps = mt7988_mac_port_get_caps,
--		.mac_port_config = mt7988_mac_config,
- 	},
- };
- EXPORT_SYMBOL_GPL(mt753x_table);
-@@ -3411,8 +3402,7 @@ mt7530_probe_common(struct mt7530_priv *
- 	 * properly.
- 	 */
- 	if (!priv->info->sw_setup || !priv->info->phy_read ||
--	    !priv->info->phy_write || !priv->info->mac_port_get_caps ||
--	    !priv->info->mac_port_config)
-+	    !priv->info->phy_write || !priv->info->mac_port_get_caps)
- 		return -EINVAL;
- 
- 	priv->id = priv->info->id;
diff --git a/target/linux/generic/backport-6.1/790-38-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch b/target/linux/generic/backport-6.1/790-38-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch
deleted file mode 100644
index b8473ed1285e..000000000000
--- a/target/linux/generic/backport-6.1/790-38-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 0e297b1c662825f7dcd97272323c81f502987e0f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Mar 2024 12:42:58 +0200
-Subject: [PATCH 38/48] net: dsa: mt7530: set interrupt register only for
- MT7530
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Setting this register related to interrupts is only needed for the MT7530
-switch. Make an exclusive check to ensure this.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2259,7 +2259,7 @@ mt7530_setup_irq(struct mt7530_priv *pri
- 	}
- 
- 	/* This register must be set for MT7530 to properly fire interrupts */
--	if (priv->id != ID_MT7531)
-+	if (priv->id == ID_MT7530 || priv->id == ID_MT7621)
- 		mt7530_set(priv, MT7530_TOP_SIG_CTRL, TOP_SIG_CTRL_NORMAL);
- 
- 	ret = request_threaded_irq(priv->irq, NULL, mt7530_irq_thread_fn,
diff --git a/target/linux/generic/backport-6.1/790-39-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch b/target/linux/generic/backport-6.1/790-39-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch
deleted file mode 100644
index 216a781087dd..000000000000
--- a/target/linux/generic/backport-6.1/790-39-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 0eb6bc551371070325b6606cc3bed6734ecad87d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Mar 2024 12:42:59 +0200
-Subject: [PATCH 39/48] net: dsa: mt7530: do not use SW_PHY_RST to reset MT7531
- switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-According to the document MT7531 Reference Manual for Development Board
-v1.0, the SW_PHY_RST bit on the SYS_CTRL register doesn't exist for
-MT7531. This is likely why forcing link down on all ports is necessary for
-MT7531.
-
-Therefore, do not set SW_PHY_RST on mt7531_setup().
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2660,14 +2660,12 @@ mt7531_setup(struct dsa_switch *ds)
- 	val = mt7530_read(priv, MT7531_TOP_SIG_SR);
- 	priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
- 
--	/* all MACs must be forced link-down before sw reset */
-+	/* Force link down on all ports before internal reset */
- 	for (i = 0; i < MT7530_NUM_PORTS; i++)
- 		mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
- 
- 	/* Reset the switch through internal reset */
--	mt7530_write(priv, MT7530_SYS_CTRL,
--		     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
--		     SYS_CTRL_REG_RST);
-+	mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
- 
- 	if (!priv->p5_sgmii) {
- 		mt7531_pll_setup(priv);
diff --git a/target/linux/generic/backport-6.1/790-40-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch b/target/linux/generic/backport-6.1/790-40-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch
deleted file mode 100644
index f920a6604d5a..000000000000
--- a/target/linux/generic/backport-6.1/790-40-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From bb20b1b4d832de4eb98ec7c22906db7c04e3f7c5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Mar 2024 12:43:00 +0200
-Subject: [PATCH 40/48] net: dsa: mt7530: get rid of useless error returns on
- phylink code path
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Remove error returns on the cases where they are already handled with the
-function the mac_port_get_caps member in mt753x_table points to.
-
-mt7531_mac_config() is also called from mt7531_cpu_port_config() outside of
-phylink but the port and interface modes are already handled there.
-
-Change the functions and the mac_port_config function pointer to void now
-that there're no error returns anymore.
-
-Remove mt753x_is_mac_port() that used to help the said error returns.
-
-On mt7531_mac_config(), switch to if statements to simplify the code.
-
-Remove internal phy cases from mt753x_phylink_mac_config(), there is no
-need to check the interface mode as that's already handled with the
-function the mac_port_get_caps member in mt753x_table points to.
-
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 81 ++++++++--------------------------------
- drivers/net/dsa/mt7530.h |  6 +--
- 2 files changed, 19 insertions(+), 68 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2803,7 +2803,7 @@ static void mt7988_mac_port_get_caps(str
- 	}
- }
- 
--static int
-+static void
- mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
- 		  phy_interface_t interface)
- {
-@@ -2813,22 +2813,14 @@ mt7530_mac_config(struct dsa_switch *ds,
- 		mt7530_setup_port5(priv->ds, interface);
- 	else if (port == 6)
- 		mt7530_setup_port6(priv->ds, interface);
--
--	return 0;
- }
- 
--static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
--			      phy_interface_t interface,
--			      struct phy_device *phydev)
-+static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
-+			       phy_interface_t interface,
-+			       struct phy_device *phydev)
- {
- 	u32 val;
- 
--	if (priv->p5_sgmii) {
--		dev_err(priv->dev, "RGMII mode is not available for port %d\n",
--			port);
--		return -EINVAL;
--	}
--
- 	val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
- 	val |= GP_CLK_EN;
- 	val &= ~GP_MODE_MASK;
-@@ -2856,20 +2848,14 @@ static int mt7531_rgmii_setup(struct mt7
- 		case PHY_INTERFACE_MODE_RGMII_ID:
- 			break;
- 		default:
--			return -EINVAL;
-+			break;
- 		}
- 	}
--	mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
- 
--	return 0;
--}
--
--static bool mt753x_is_mac_port(u32 port)
--{
--	return (port == 5 || port == 6);
-+	mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
- }
- 
--static int
-+static void
- mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
- 		  phy_interface_t interface)
- {
-@@ -2877,42 +2863,21 @@ mt7531_mac_config(struct dsa_switch *ds,
- 	struct phy_device *phydev;
- 	struct dsa_port *dp;
- 
--	if (!mt753x_is_mac_port(port)) {
--		dev_err(priv->dev, "port %d is not a MAC port\n", port);
--		return -EINVAL;
--	}
--
--	switch (interface) {
--	case PHY_INTERFACE_MODE_RGMII:
--	case PHY_INTERFACE_MODE_RGMII_ID:
--	case PHY_INTERFACE_MODE_RGMII_RXID:
--	case PHY_INTERFACE_MODE_RGMII_TXID:
-+	if (phy_interface_mode_is_rgmii(interface)) {
- 		dp = dsa_to_port(ds, port);
- 		phydev = dp->slave->phydev;
--		return mt7531_rgmii_setup(priv, port, interface, phydev);
--	case PHY_INTERFACE_MODE_SGMII:
--	case PHY_INTERFACE_MODE_NA:
--	case PHY_INTERFACE_MODE_1000BASEX:
--	case PHY_INTERFACE_MODE_2500BASEX:
--		/* handled in SGMII PCS driver */
--		return 0;
--	default:
--		return -EINVAL;
-+		mt7531_rgmii_setup(priv, port, interface, phydev);
- 	}
--
--	return -EINVAL;
- }
- 
--static int
-+static void
- mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
- 		  const struct phylink_link_state *state)
- {
- 	struct mt7530_priv *priv = ds->priv;
- 
--	if (!priv->info->mac_port_config)
--		return 0;
--
--	return priv->info->mac_port_config(ds, port, mode, state->interface);
-+	if (priv->info->mac_port_config)
-+		priv->info->mac_port_config(ds, port, mode, state->interface);
- }
- 
- static struct phylink_pcs *
-@@ -2941,17 +2906,11 @@ mt753x_phylink_mac_config(struct dsa_swi
- 	u32 mcr_cur, mcr_new;
- 
- 	switch (port) {
--	case 0 ... 4:
--		if (state->interface != PHY_INTERFACE_MODE_GMII &&
--		    state->interface != PHY_INTERFACE_MODE_INTERNAL)
--			goto unsupported;
--		break;
- 	case 5:
- 		if (priv->p5_interface == state->interface)
- 			break;
- 
--		if (mt753x_mac_config(ds, port, mode, state) < 0)
--			goto unsupported;
-+		mt753x_mac_config(ds, port, mode, state);
- 
- 		if (priv->p5_intf_sel != P5_DISABLED)
- 			priv->p5_interface = state->interface;
-@@ -2960,16 +2919,10 @@ mt753x_phylink_mac_config(struct dsa_swi
- 		if (priv->p6_interface == state->interface)
- 			break;
- 
--		if (mt753x_mac_config(ds, port, mode, state) < 0)
--			goto unsupported;
-+		mt753x_mac_config(ds, port, mode, state);
- 
- 		priv->p6_interface = state->interface;
- 		break;
--	default:
--unsupported:
--		dev_err(ds->dev, "%s: unsupported %s port: %i\n",
--			__func__, phy_modes(state->interface), port);
--		return;
- 	}
- 
- 	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
-@@ -3052,7 +3005,6 @@ mt7531_cpu_port_config(struct dsa_switch
- 	struct mt7530_priv *priv = ds->priv;
- 	phy_interface_t interface;
- 	int speed;
--	int ret;
- 
- 	switch (port) {
- 	case 5:
-@@ -3077,9 +3029,8 @@ mt7531_cpu_port_config(struct dsa_switch
- 	else
- 		speed = SPEED_1000;
- 
--	ret = mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
--	if (ret)
--		return ret;
-+	mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
-+
- 	mt7530_write(priv, MT7530_PMCR_P(port),
- 		     PMCR_CPU_PORT_SETTING(priv->id));
- 	mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -753,9 +753,9 @@ struct mt753x_info {
- 	void (*mac_port_validate)(struct dsa_switch *ds, int port,
- 				  phy_interface_t interface,
- 				  unsigned long *supported);
--	int (*mac_port_config)(struct dsa_switch *ds, int port,
--			       unsigned int mode,
--			       phy_interface_t interface);
-+	void (*mac_port_config)(struct dsa_switch *ds, int port,
-+				unsigned int mode,
-+				phy_interface_t interface);
- };
- 
- /* struct mt7530_priv -	This is the main data structure for holding the state
diff --git a/target/linux/generic/backport-6.1/790-41-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch b/target/linux/generic/backport-6.1/790-41-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch
deleted file mode 100644
index eb0a5706ecab..000000000000
--- a/target/linux/generic/backport-6.1/790-41-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch
+++ /dev/null
@@ -1,305 +0,0 @@
-From 8554f6a7914d28b179671540f527897d85c88809 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Mar 2024 12:43:01 +0200
-Subject: [PATCH 41/48] net: dsa: mt7530: get rid of
- priv->info->cpu_port_config()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-priv->info->cpu_port_config() is used for MT7531 and the switch on the
-MT7988 SoC. It sets up the ports described as a CPU port earlier than the
-phylink code path would do.
-
-This function is useless as:
-- Configuring the MACs can be done from the phylink_mac_config code path
-  instead.
-- All the link configuration it does on the CPU ports are later undone with
-  the port_enable, phylink_mac_config, and then phylink_mac_link_up code
-  path [1].
-
-priv->p5_interface and priv->p6_interface were being used to prevent
-configuring the MACs from the phylink_mac_config code path. Remove them now
-that they hold no purpose.
-
-Remove priv->info->cpu_port_config(). On mt753x_phylink_mac_config, switch
-to if statements to simplify the code.
-
-Remove the overwriting of the speed and duplex interfaces for certain
-interface modes. Phylink already provides the speed and duplex variables
-with proper values. Phylink already sets the max speed of TRGMII to
-SPEED_1000. Add SPEED_2500 for PHY_INTERFACE_MODE_2500BASEX to where the
-speed and EEE bits are set instead.
-
-On the switch on the MT7988 SoC, PHY_INTERFACE_MODE_INTERNAL is being used
-to describe the interface mode of the 10G MAC, which is of port 6. On
-mt7988_cpu_port_config() PMCR_FORCE_SPEED_1000 was set via the
-PMCR_CPU_PORT_SETTING() mask. Add SPEED_10000 case to where the speed bits
-are set to cover this. No need to add it to where the EEE bits are set as
-the "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
-v0.1" document shows that these bits don't exist on the MT7530_PMCR_P(6)
-register.
-
-Remove the definition of PMCR_CPU_PORT_SETTING() now that it holds no
-purpose.
-
-Change mt753x_cpu_port_enable() to void now that there're no error cases
-left.
-
-Link: https://lore.kernel.org/netdev/ZHy2jQLesdYFMQtO@shell.armlinux.org.uk/ [1]
-Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 114 +++------------------------------------
- drivers/net/dsa/mt7530.h |  11 ----
- 2 files changed, 7 insertions(+), 118 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1170,18 +1170,10 @@ mt753x_trap_frames(struct mt7530_priv *p
- 			   MT753X_BPDU_CPU_ONLY);
- }
- 
--static int
-+static void
- mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
- {
- 	struct mt7530_priv *priv = ds->priv;
--	int ret;
--
--	/* Setup max capability of CPU port at first */
--	if (priv->info->cpu_port_config) {
--		ret = priv->info->cpu_port_config(ds, port);
--		if (ret)
--			return ret;
--	}
- 
- 	/* Enable Mediatek header mode on the cpu port */
- 	mt7530_write(priv, MT7530_PVC_P(port),
-@@ -1207,8 +1199,6 @@ mt753x_cpu_port_enable(struct dsa_switch
- 	/* Set to fallback mode for independent VLAN learning */
- 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
- 		   MT7530_PORT_FALLBACK_MODE);
--
--	return 0;
- }
- 
- static int
-@@ -2461,8 +2451,6 @@ mt7530_setup(struct dsa_switch *ds)
- 	val |= MHWTRAP_MANUAL;
- 	mt7530_write(priv, MT7530_MHWTRAP, val);
- 
--	priv->p6_interface = PHY_INTERFACE_MODE_NA;
--
- 	if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
- 		mt7530_pll_setup(priv);
- 
-@@ -2480,9 +2468,7 @@ mt7530_setup(struct dsa_switch *ds)
- 		mt7530_set(priv, MT7530_PSC_P(i), SA_DIS);
- 
- 		if (dsa_is_cpu_port(ds, i)) {
--			ret = mt753x_cpu_port_enable(ds, i);
--			if (ret)
--				return ret;
-+			mt753x_cpu_port_enable(ds, i);
- 		} else {
- 			mt7530_port_disable(ds, i);
- 
-@@ -2589,9 +2575,7 @@ mt7531_setup_common(struct dsa_switch *d
- 		mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
- 
- 		if (dsa_is_cpu_port(ds, i)) {
--			ret = mt753x_cpu_port_enable(ds, i);
--			if (ret)
--				return ret;
-+			mt753x_cpu_port_enable(ds, i);
- 		} else {
- 			mt7530_port_disable(ds, i);
- 
-@@ -2683,10 +2667,6 @@ mt7531_setup(struct dsa_switch *ds)
- 	mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
- 		   MT7531_GPIO0_INTERRUPT);
- 
--	/* Let phylink decide the interface later. */
--	priv->p5_interface = PHY_INTERFACE_MODE_NA;
--	priv->p6_interface = PHY_INTERFACE_MODE_NA;
--
- 	/* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
- 	 * phy_device has not yet been created provided for
- 	 * phy_[read,write]_mmd_indirect is called, we provide our own
-@@ -2905,26 +2885,9 @@ mt753x_phylink_mac_config(struct dsa_swi
- 	struct mt7530_priv *priv = ds->priv;
- 	u32 mcr_cur, mcr_new;
- 
--	switch (port) {
--	case 5:
--		if (priv->p5_interface == state->interface)
--			break;
--
-+	if (port == 5 || port == 6)
- 		mt753x_mac_config(ds, port, mode, state);
- 
--		if (priv->p5_intf_sel != P5_DISABLED)
--			priv->p5_interface = state->interface;
--		break;
--	case 6:
--		if (priv->p6_interface == state->interface)
--			break;
--
--		mt753x_mac_config(ds, port, mode, state);
--
--		priv->p6_interface = state->interface;
--		break;
--	}
--
- 	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
- 	mcr_new = mcr_cur;
- 	mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
-@@ -2960,17 +2923,10 @@ static void mt753x_phylink_mac_link_up(s
- 
- 	mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
- 
--	/* MT753x MAC works in 1G full duplex mode for all up-clocked
--	 * variants.
--	 */
--	if (interface == PHY_INTERFACE_MODE_TRGMII ||
--	    (phy_interface_mode_is_8023z(interface))) {
--		speed = SPEED_1000;
--		duplex = DUPLEX_FULL;
--	}
--
- 	switch (speed) {
- 	case SPEED_1000:
-+	case SPEED_2500:
-+	case SPEED_10000:
- 		mcr |= PMCR_FORCE_SPEED_1000;
- 		break;
- 	case SPEED_100:
-@@ -2988,6 +2944,7 @@ static void mt753x_phylink_mac_link_up(s
- 	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
- 		switch (speed) {
- 		case SPEED_1000:
-+		case SPEED_2500:
- 			mcr |= PMCR_FORCE_EEE1G;
- 			break;
- 		case SPEED_100:
-@@ -2999,61 +2956,6 @@ static void mt753x_phylink_mac_link_up(s
- 	mt7530_set(priv, MT7530_PMCR_P(port), mcr);
- }
- 
--static int
--mt7531_cpu_port_config(struct dsa_switch *ds, int port)
--{
--	struct mt7530_priv *priv = ds->priv;
--	phy_interface_t interface;
--	int speed;
--
--	switch (port) {
--	case 5:
--		if (!priv->p5_sgmii)
--			interface = PHY_INTERFACE_MODE_RGMII;
--		else
--			interface = PHY_INTERFACE_MODE_2500BASEX;
--
--		priv->p5_interface = interface;
--		break;
--	case 6:
--		interface = PHY_INTERFACE_MODE_2500BASEX;
--
--		priv->p6_interface = interface;
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	if (interface == PHY_INTERFACE_MODE_2500BASEX)
--		speed = SPEED_2500;
--	else
--		speed = SPEED_1000;
--
--	mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
--
--	mt7530_write(priv, MT7530_PMCR_P(port),
--		     PMCR_CPU_PORT_SETTING(priv->id));
--	mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
--				   speed, DUPLEX_FULL, true, true);
--
--	return 0;
--}
--
--static int
--mt7988_cpu_port_config(struct dsa_switch *ds, int port)
--{
--	struct mt7530_priv *priv = ds->priv;
--
--	mt7530_write(priv, MT7530_PMCR_P(port),
--		     PMCR_CPU_PORT_SETTING(priv->id));
--
--	mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED,
--				   PHY_INTERFACE_MODE_INTERNAL, NULL,
--				   SPEED_10000, DUPLEX_FULL, true, true);
--
--	return 0;
--}
--
- static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
- 				    struct phylink_config *config)
- {
-@@ -3312,7 +3214,6 @@ const struct mt753x_info mt753x_table[]
- 		.sw_setup = mt7531_setup,
- 		.phy_read = mt7531_ind_phy_read,
- 		.phy_write = mt7531_ind_phy_write,
--		.cpu_port_config = mt7531_cpu_port_config,
- 		.mac_port_get_caps = mt7531_mac_port_get_caps,
- 		.mac_port_config = mt7531_mac_config,
- 	},
-@@ -3322,7 +3223,6 @@ const struct mt753x_info mt753x_table[]
- 		.sw_setup = mt7988_setup,
- 		.phy_read = mt7531_ind_phy_read,
- 		.phy_write = mt7531_ind_phy_write,
--		.cpu_port_config = mt7988_cpu_port_config,
- 		.mac_port_get_caps = mt7988_mac_port_get_caps,
- 	},
- };
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -340,13 +340,6 @@ enum mt7530_vlan_port_acc_frm {
- 					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
- 					 PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
- 					 PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
--#define  PMCR_CPU_PORT_SETTING(id)	(PMCR_FORCE_MODE_ID((id)) | \
--					 PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \
--					 PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \
--					 PMCR_TX_EN | PMCR_RX_EN | \
--					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
--					 PMCR_FORCE_SPEED_1000 | \
--					 PMCR_FORCE_FDX | PMCR_FORCE_LNK)
- 
- #define MT7530_PMEEECR_P(x)		(0x3004 + (x) * 0x100)
- #define  WAKEUP_TIME_1000(x)		(((x) & 0xFF) << 24)
-@@ -747,7 +740,6 @@ struct mt753x_info {
- 	int (*sw_setup)(struct dsa_switch *ds);
- 	int (*phy_read)(struct mt7530_priv *priv, int port, int regnum);
- 	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
--	int (*cpu_port_config)(struct dsa_switch *ds, int port);
- 	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
- 				  struct phylink_config *config);
- 	void (*mac_port_validate)(struct dsa_switch *ds, int port,
-@@ -773,7 +765,6 @@ struct mt753x_info {
-  * @ports:		Holding the state among ports
-  * @reg_mutex:		The lock for protecting among process accessing
-  *			registers
-- * @p6_interface	Holding the current port 6 interface
-  * @p5_intf_sel:	Holding the current port 5 interface select
-  * @p5_sgmii:		Flag for distinguishing if port 5 of the MT7531 switch
-  *			has got SGMII
-@@ -795,8 +786,6 @@ struct mt7530_priv {
- 	const struct mt753x_info *info;
- 	unsigned int		id;
- 	bool			mcm;
--	phy_interface_t		p6_interface;
--	phy_interface_t		p5_interface;
- 	enum p5_interface_select p5_intf_sel;
- 	bool			p5_sgmii;
- 	u8			mirror_rx;
diff --git a/target/linux/generic/backport-6.1/790-42-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch b/target/linux/generic/backport-6.1/790-42-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch
deleted file mode 100644
index c83a62780894..000000000000
--- a/target/linux/generic/backport-6.1/790-42-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 0c282205ef8c6dd6d2c145fac1fb6aba3e65c02d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Mar 2024 12:43:02 +0200
-Subject: [PATCH 42/48] net: dsa: mt7530: get rid of mt753x_mac_config()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There is no need for a separate function to call
-priv->info->mac_port_config(). Call it from mt753x_phylink_mac_config()
-instead and remove mt753x_mac_config().
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 14 ++------------
- 1 file changed, 2 insertions(+), 12 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2850,16 +2850,6 @@ mt7531_mac_config(struct dsa_switch *ds,
- 	}
- }
- 
--static void
--mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
--		  const struct phylink_link_state *state)
--{
--	struct mt7530_priv *priv = ds->priv;
--
--	if (priv->info->mac_port_config)
--		priv->info->mac_port_config(ds, port, mode, state->interface);
--}
--
- static struct phylink_pcs *
- mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
- 			      phy_interface_t interface)
-@@ -2885,8 +2875,8 @@ mt753x_phylink_mac_config(struct dsa_swi
- 	struct mt7530_priv *priv = ds->priv;
- 	u32 mcr_cur, mcr_new;
- 
--	if (port == 5 || port == 6)
--		mt753x_mac_config(ds, port, mode, state);
-+	if ((port == 5 || port == 6) && priv->info->mac_port_config)
-+		priv->info->mac_port_config(ds, port, mode, state->interface);
- 
- 	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
- 	mcr_new = mcr_cur;
diff --git a/target/linux/generic/backport-6.1/790-43-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch b/target/linux/generic/backport-6.1/790-43-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch
deleted file mode 100644
index 84ee7416bff4..000000000000
--- a/target/linux/generic/backport-6.1/790-43-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From d55c300aa1fe240aa3eba18550ba6c4e2c4bd157 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Mar 2024 12:43:03 +0200
-Subject: [PATCH 43/48] net: dsa: mt7530: put initialising PCS devices code
- back to original order
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The commit fae463084032 ("net: dsa: mt753x: fix pcs conversion regression")
-fixes regression caused by cpu_port_config manually calling phylink
-operations. cpu_port_config was deemed useless and was removed. Therefore,
-put initialising PCS devices code back to its original order.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 20 ++++++++++----------
- 1 file changed, 10 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3034,17 +3034,9 @@ static int
- mt753x_setup(struct dsa_switch *ds)
- {
- 	struct mt7530_priv *priv = ds->priv;
--	int i, ret;
-+	int ret = priv->info->sw_setup(ds);
-+	int i;
- 
--	/* Initialise the PCS devices */
--	for (i = 0; i < priv->ds->num_ports; i++) {
--		priv->pcs[i].pcs.ops = priv->info->pcs_ops;
--		priv->pcs[i].pcs.neg_mode = true;
--		priv->pcs[i].priv = priv;
--		priv->pcs[i].port = i;
--	}
--
--	ret = priv->info->sw_setup(ds);
- 	if (ret)
- 		return ret;
- 
-@@ -3056,6 +3048,14 @@ mt753x_setup(struct dsa_switch *ds)
- 	if (ret && priv->irq)
- 		mt7530_free_irq_common(priv);
- 
-+	/* Initialise the PCS devices */
-+	for (i = 0; i < priv->ds->num_ports; i++) {
-+		priv->pcs[i].pcs.ops = priv->info->pcs_ops;
-+		priv->pcs[i].pcs.neg_mode = true;
-+		priv->pcs[i].priv = priv;
-+		priv->pcs[i].port = i;
-+	}
-+
- 	if (priv->create_sgmii) {
- 		ret = priv->create_sgmii(priv);
- 		if (ret && priv->irq)
diff --git a/target/linux/generic/backport-6.1/790-44-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch b/target/linux/generic/backport-6.1/790-44-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch
deleted file mode 100644
index 814a9d06e702..000000000000
--- a/target/linux/generic/backport-6.1/790-44-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From a9544caa482a7ed215117a902f04185216997831 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Mar 2024 12:43:04 +0200
-Subject: [PATCH 44/48] net: dsa: mt7530: sort link settings ops and force link
- down on all ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-port_enable and port_disable clears the link settings. Move that to
-mt7530_setup() and mt7531_setup_common() which set up the switches. This
-way, the link settings are cleared on all ports at setup, and then only
-once with phylink_mac_link_down() when a link goes down.
-
-Enable force mode at setup to apply the force part of the link settings.
-This ensures that disabled ports will have their link down.
-
-Suggested-by: Vladimir Oltean <olteanv@gmail.com>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 14 ++++++++++++--
- 1 file changed, 12 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1222,7 +1222,6 @@ mt7530_port_enable(struct dsa_switch *ds
- 	priv->ports[port].enable = true;
- 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
- 		   priv->ports[port].pm);
--	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
- 
- 	mutex_unlock(&priv->reg_mutex);
- 
-@@ -1242,7 +1241,6 @@ mt7530_port_disable(struct dsa_switch *d
- 	priv->ports[port].enable = false;
- 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
- 		   PCR_MATRIX_CLR);
--	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
- 
- 	mutex_unlock(&priv->reg_mutex);
- }
-@@ -2460,6 +2458,12 @@ mt7530_setup(struct dsa_switch *ds)
- 	mt7530_mib_reset(ds);
- 
- 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+		/* Clear link settings and enable force mode to force link down
-+		 * on all ports until they're enabled later.
-+		 */
-+		mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-+			   PMCR_FORCE_MODE, PMCR_FORCE_MODE);
-+
- 		/* Disable forwarding by default on all ports */
- 		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
- 			   PCR_MATRIX_CLR);
-@@ -2565,6 +2569,12 @@ mt7531_setup_common(struct dsa_switch *d
- 		     UNU_FFP_MASK);
- 
- 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+		/* Clear link settings and enable force mode to force link down
-+		 * on all ports until they're enabled later.
-+		 */
-+		mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-+			   MT7531_FORCE_MODE, MT7531_FORCE_MODE);
-+
- 		/* Disable forwarding by default on all ports */
- 		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
- 			   PCR_MATRIX_CLR);
diff --git a/target/linux/generic/backport-6.1/790-45-v6.9-net-dsa-mt7530-simplify-link-operations.patch b/target/linux/generic/backport-6.1/790-45-v6.9-net-dsa-mt7530-simplify-link-operations.patch
deleted file mode 100644
index d9f91a932ad1..000000000000
--- a/target/linux/generic/backport-6.1/790-45-v6.9-net-dsa-mt7530-simplify-link-operations.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 89017cac5f6fbaab23955818c31b3c7f1eb26f4a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Fri, 1 Mar 2024 12:43:05 +0200
-Subject: [PATCH 45/48] net: dsa: mt7530: simplify link operations
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The "MT7621 Giga Switch Programming Guide v0.3", "MT7531 Reference Manual
-for Development Board v1.0", and "MT7988A Wi-Fi 7 Generation Router
-Platform: Datasheet (Open Version) v0.1" documents show that these bits are
-enabled at reset:
-
-PMCR_IFG_XMIT(1) (not part of PMCR_LINK_SETTINGS_MASK)
-PMCR_MAC_MODE (not part of PMCR_LINK_SETTINGS_MASK)
-PMCR_TX_EN
-PMCR_RX_EN
-PMCR_BACKOFF_EN (not part of PMCR_LINK_SETTINGS_MASK)
-PMCR_BACKPR_EN (not part of PMCR_LINK_SETTINGS_MASK)
-PMCR_TX_FC_EN
-PMCR_RX_FC_EN
-
-These bits also don't exist on the MT7530_PMCR_P(6) register of the switch
-on the MT7988 SoC:
-
-PMCR_IFG_XMIT()
-PMCR_MAC_MODE
-PMCR_BACKOFF_EN
-PMCR_BACKPR_EN
-
-Remove the setting of the bits not part of PMCR_LINK_SETTINGS_MASK on
-phylink_mac_config as they're already set.
-
-The bit for setting the port on force mode is already done on
-mt7530_setup() and mt7531_setup_common(). So get rid of
-PMCR_FORCE_MODE_ID() which helped determine which bit to use for the switch
-model.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 12 +-----------
- drivers/net/dsa/mt7530.h |  2 --
- 2 files changed, 1 insertion(+), 13 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2883,23 +2883,13 @@ mt753x_phylink_mac_config(struct dsa_swi
- 			  const struct phylink_link_state *state)
- {
- 	struct mt7530_priv *priv = ds->priv;
--	u32 mcr_cur, mcr_new;
- 
- 	if ((port == 5 || port == 6) && priv->info->mac_port_config)
- 		priv->info->mac_port_config(ds, port, mode, state->interface);
- 
--	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
--	mcr_new = mcr_cur;
--	mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
--	mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
--		   PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id);
--
- 	/* Are we connected to external phy */
- 	if (port == 5 && dsa_is_user_port(ds, 5))
--		mcr_new |= PMCR_EXT_PHY;
--
--	if (mcr_new != mcr_cur)
--		mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
-+		mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
- }
- 
- static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -333,8 +333,6 @@ enum mt7530_vlan_port_acc_frm {
- 					 MT7531_FORCE_DPX | \
- 					 MT7531_FORCE_RX_FC | \
- 					 MT7531_FORCE_TX_FC)
--#define  PMCR_FORCE_MODE_ID(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
--					 MT7531_FORCE_MODE : PMCR_FORCE_MODE)
- #define  PMCR_LINK_SETTINGS_MASK	(PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
- 					 PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
- 					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
diff --git a/target/linux/generic/backport-6.1/790-49-v6.10-net-dsa-mt7530-provide-own-phylink-MAC-operations.patch b/target/linux/generic/backport-6.1/790-49-v6.10-net-dsa-mt7530-provide-own-phylink-MAC-operations.patch
deleted file mode 100644
index 8962e560f71c..000000000000
--- a/target/linux/generic/backport-6.1/790-49-v6.10-net-dsa-mt7530-provide-own-phylink-MAC-operations.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 5754b3bdcd872aa229881b8f07f84a8404c7d72a Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 12 Apr 2024 16:15:34 +0100
-Subject: [PATCH 1/5] net: dsa: mt7530: provide own phylink MAC operations
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Convert mt753x to provide its own phylink MAC operations, thus avoiding
-the shim layer in DSA's port.c
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Link: https://lore.kernel.org/r/E1rvIco-006bQu-Fq@rmk-PC.armlinux.org.uk
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 46 +++++++++++++++++++++++++---------------
- 1 file changed, 29 insertions(+), 17 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2861,28 +2861,34 @@ mt7531_mac_config(struct dsa_switch *ds,
- }
- 
- static struct phylink_pcs *
--mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
-+mt753x_phylink_mac_select_pcs(struct phylink_config *config,
- 			      phy_interface_t interface)
- {
--	struct mt7530_priv *priv = ds->priv;
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
-+	struct mt7530_priv *priv = dp->ds->priv;
- 
- 	switch (interface) {
- 	case PHY_INTERFACE_MODE_TRGMII:
--		return &priv->pcs[port].pcs;
-+		return &priv->pcs[dp->index].pcs;
- 	case PHY_INTERFACE_MODE_SGMII:
- 	case PHY_INTERFACE_MODE_1000BASEX:
- 	case PHY_INTERFACE_MODE_2500BASEX:
--		return priv->ports[port].sgmii_pcs;
-+		return priv->ports[dp->index].sgmii_pcs;
- 	default:
- 		return NULL;
- 	}
- }
- 
- static void
--mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
-+mt753x_phylink_mac_config(struct phylink_config *config, unsigned int mode,
- 			  const struct phylink_link_state *state)
- {
--	struct mt7530_priv *priv = ds->priv;
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
-+	struct dsa_switch *ds = dp->ds;
-+	struct mt7530_priv *priv;
-+	int port = dp->index;
-+
-+	priv = ds->priv;
- 
- 	if ((port == 5 || port == 6) && priv->info->mac_port_config)
- 		priv->info->mac_port_config(ds, port, mode, state->interface);
-@@ -2892,23 +2898,25 @@ mt753x_phylink_mac_config(struct dsa_swi
- 		mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
- }
- 
--static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
-+static void mt753x_phylink_mac_link_down(struct phylink_config *config,
- 					 unsigned int mode,
- 					 phy_interface_t interface)
- {
--	struct mt7530_priv *priv = ds->priv;
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
-+	struct mt7530_priv *priv = dp->ds->priv;
- 
--	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
-+	mt7530_clear(priv, MT7530_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
- }
- 
--static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
-+static void mt753x_phylink_mac_link_up(struct phylink_config *config,
-+				       struct phy_device *phydev,
- 				       unsigned int mode,
- 				       phy_interface_t interface,
--				       struct phy_device *phydev,
- 				       int speed, int duplex,
- 				       bool tx_pause, bool rx_pause)
- {
--	struct mt7530_priv *priv = ds->priv;
-+	struct dsa_port *dp = dsa_phylink_to_port(config);
-+	struct mt7530_priv *priv = dp->ds->priv;
- 	u32 mcr;
- 
- 	mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
-@@ -2943,7 +2951,7 @@ static void mt753x_phylink_mac_link_up(s
- 		}
- 	}
- 
--	mt7530_set(priv, MT7530_PMCR_P(port), mcr);
-+	mt7530_set(priv, MT7530_PMCR_P(dp->index), mcr);
- }
- 
- static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
-@@ -3169,16 +3177,19 @@ const struct dsa_switch_ops mt7530_switc
- 	.port_mirror_add	= mt753x_port_mirror_add,
- 	.port_mirror_del	= mt753x_port_mirror_del,
- 	.phylink_get_caps	= mt753x_phylink_get_caps,
--	.phylink_mac_select_pcs	= mt753x_phylink_mac_select_pcs,
--	.phylink_mac_config	= mt753x_phylink_mac_config,
--	.phylink_mac_link_down	= mt753x_phylink_mac_link_down,
--	.phylink_mac_link_up	= mt753x_phylink_mac_link_up,
- 	.get_mac_eee		= mt753x_get_mac_eee,
- 	.set_mac_eee		= mt753x_set_mac_eee,
- 	.master_state_change	= mt753x_conduit_state_change,
- };
- EXPORT_SYMBOL_GPL(mt7530_switch_ops);
- 
-+static const struct phylink_mac_ops mt753x_phylink_mac_ops = {
-+	.mac_select_pcs	= mt753x_phylink_mac_select_pcs,
-+	.mac_config	= mt753x_phylink_mac_config,
-+	.mac_link_down	= mt753x_phylink_mac_link_down,
-+	.mac_link_up	= mt753x_phylink_mac_link_up,
-+};
-+
- const struct mt753x_info mt753x_table[] = {
- 	[ID_MT7621] = {
- 		.id = ID_MT7621,
-@@ -3248,6 +3259,7 @@ mt7530_probe_common(struct mt7530_priv *
- 	priv->dev = dev;
- 	priv->ds->priv = priv;
- 	priv->ds->ops = &mt7530_switch_ops;
-+	priv->ds->phylink_mac_ops = &mt753x_phylink_mac_ops;
- 	mutex_init(&priv->reg_mutex);
- 	dev_set_drvdata(dev, priv);
- 
diff --git a/target/linux/generic/backport-6.1/790-51-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch b/target/linux/generic/backport-6.1/790-51-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch
deleted file mode 100644
index cd5b7b287d39..000000000000
--- a/target/linux/generic/backport-6.1/790-51-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 019a17a5e76940ea86114838d1d638d4dc8d3750 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Sat, 13 Apr 2024 16:01:40 +0300
-Subject: [PATCH 3/5] net: dsa: mt7530: fix port mirroring for MT7988 SoC
- switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
-v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
-forward control register. Currently, the MT7530 DSA subdriver configures
-bits 0 to 2 of the CPU forward control register which breaks the port
-mirroring feature for the MT7988 SoC switch.
-
-Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
-macros which utilise the correct bits.
-
-Fixes: 110c18bfed41 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mt7530.c | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1890,14 +1890,16 @@ mt7530_port_vlan_del(struct dsa_switch *
- 
- static int mt753x_mirror_port_get(unsigned int id, u32 val)
- {
--	return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) :
--				   MIRROR_PORT(val);
-+	return (id == ID_MT7531 || id == ID_MT7988) ?
-+		       MT7531_MIRROR_PORT_GET(val) :
-+		       MIRROR_PORT(val);
- }
- 
- static int mt753x_mirror_port_set(unsigned int id, u32 val)
- {
--	return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) :
--				   MIRROR_PORT(val);
-+	return (id == ID_MT7531 || id == ID_MT7988) ?
-+		       MT7531_MIRROR_PORT_SET(val) :
-+		       MIRROR_PORT(val);
- }
- 
- static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
diff --git a/target/linux/generic/backport-6.1/790-52-v6.10-net-dsa-mt7530-mdio-read-PHY-address-of-switch-from-.patch b/target/linux/generic/backport-6.1/790-52-v6.10-net-dsa-mt7530-mdio-read-PHY-address-of-switch-from-.patch
deleted file mode 100644
index e9c8f955c9fe..000000000000
--- a/target/linux/generic/backport-6.1/790-52-v6.10-net-dsa-mt7530-mdio-read-PHY-address-of-switch-from-.patch
+++ /dev/null
@@ -1,238 +0,0 @@
-From 5053a6cf1d50d785078562470d2a63695a9f3bf2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Thu, 18 Apr 2024 08:35:30 +0300
-Subject: [PATCH 4/5] net: dsa: mt7530-mdio: read PHY address of switch from
- device tree
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Read the PHY address the switch listens on from the reg property of the
-switch node on the device tree. This change brings support for MT7530
-switches on boards with such bootstrapping configuration where the switch
-listens on a different PHY address than the hardcoded PHY address on the
-driver, 31.
-
-As described on the "MT7621 Programming Guide v0.4" document, the MT7530
-switch and its PHYs can be configured to listen on the range of 7-12,
-15-20, 23-28, and 31 and 0-4 PHY addresses.
-
-There are operations where the switch PHY registers are used. For the PHY
-address of the control PHY, transform the MT753X_CTRL_PHY_ADDR constant
-into a macro and use it. The PHY address for the control PHY is 0 when the
-switch listens on 31. In any other case, it is one greater than the PHY
-address the switch listens on.
-
-Reviewed-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530-mdio.c | 28 +++++++++++++-------------
- drivers/net/dsa/mt7530.c      | 37 +++++++++++++++++++++++------------
- drivers/net/dsa/mt7530.h      |  4 +++-
- 3 files changed, 41 insertions(+), 28 deletions(-)
-
---- a/drivers/net/dsa/mt7530-mdio.c
-+++ b/drivers/net/dsa/mt7530-mdio.c
-@@ -18,7 +18,8 @@
- static int
- mt7530_regmap_write(void *context, unsigned int reg, unsigned int val)
- {
--	struct mii_bus *bus = context;
-+	struct mt7530_priv *priv = context;
-+	struct mii_bus *bus = priv->bus;
- 	u16 page, r, lo, hi;
- 	int ret;
- 
-@@ -27,36 +28,35 @@ mt7530_regmap_write(void *context, unsig
- 	lo = val & 0xffff;
- 	hi = val >> 16;
- 
--	/* MT7530 uses 31 as the pseudo port */
--	ret = bus->write(bus, 0x1f, 0x1f, page);
-+	ret = bus->write(bus, priv->mdiodev->addr, 0x1f, page);
- 	if (ret < 0)
- 		return ret;
- 
--	ret = bus->write(bus, 0x1f, r,  lo);
-+	ret = bus->write(bus, priv->mdiodev->addr, r, lo);
- 	if (ret < 0)
- 		return ret;
- 
--	ret = bus->write(bus, 0x1f, 0x10, hi);
-+	ret = bus->write(bus, priv->mdiodev->addr, 0x10, hi);
- 	return ret;
- }
- 
- static int
- mt7530_regmap_read(void *context, unsigned int reg, unsigned int *val)
- {
--	struct mii_bus *bus = context;
-+	struct mt7530_priv *priv = context;
-+	struct mii_bus *bus = priv->bus;
- 	u16 page, r, lo, hi;
- 	int ret;
- 
- 	page = (reg >> 6) & 0x3ff;
- 	r = (reg >> 2) & 0xf;
- 
--	/* MT7530 uses 31 as the pseudo port */
--	ret = bus->write(bus, 0x1f, 0x1f, page);
-+	ret = bus->write(bus, priv->mdiodev->addr, 0x1f, page);
- 	if (ret < 0)
- 		return ret;
- 
--	lo = bus->read(bus, 0x1f, r);
--	hi = bus->read(bus, 0x1f, 0x10);
-+	lo = bus->read(bus, priv->mdiodev->addr, r);
-+	hi = bus->read(bus, priv->mdiodev->addr, 0x10);
- 
- 	*val = (hi << 16) | (lo & 0xffff);
- 
-@@ -107,8 +107,7 @@ mt7531_create_sgmii(struct mt7530_priv *
- 		mt7531_pcs_config[i]->unlock = mt7530_mdio_regmap_unlock;
- 		mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock;
- 
--		regmap = devm_regmap_init(priv->dev,
--					  &mt7530_regmap_bus, priv->bus,
-+		regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv,
- 					  mt7531_pcs_config[i]);
- 		if (IS_ERR(regmap)) {
- 			ret = PTR_ERR(regmap);
-@@ -153,6 +152,7 @@ mt7530_probe(struct mdio_device *mdiodev
- 
- 	priv->bus = mdiodev->bus;
- 	priv->dev = &mdiodev->dev;
-+	priv->mdiodev = mdiodev;
- 
- 	ret = mt7530_probe_common(priv);
- 	if (ret)
-@@ -203,8 +203,8 @@ mt7530_probe(struct mdio_device *mdiodev
- 	regmap_config->reg_stride = 4;
- 	regmap_config->max_register = MT7530_CREV;
- 	regmap_config->disable_locking = true;
--	priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus,
--					priv->bus, regmap_config);
-+	priv->regmap = devm_regmap_init(priv->dev, &mt7530_regmap_bus, priv,
-+					regmap_config);
- 	if (IS_ERR(priv->regmap))
- 		return PTR_ERR(priv->regmap);
- 
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -86,22 +86,26 @@ core_read_mmd_indirect(struct mt7530_pri
- 	int value, ret;
- 
- 	/* Write the desired MMD Devad */
--	ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
-+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			 MII_MMD_CTRL, devad);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Write the desired MMD register address */
--	ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
-+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			 MII_MMD_DATA, prtad);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Select the Function : DATA with no post increment */
--	ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
-+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Read the content of the MMD's selected register */
--	value = bus->read(bus, 0, MII_MMD_DATA);
-+	value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			  MII_MMD_DATA);
- 
- 	return value;
- err:
-@@ -118,22 +122,26 @@ core_write_mmd_indirect(struct mt7530_pr
- 	int ret;
- 
- 	/* Write the desired MMD Devad */
--	ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
-+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			 MII_MMD_CTRL, devad);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Write the desired MMD register address */
--	ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
-+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			 MII_MMD_DATA, prtad);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Select the Function : DATA with no post increment */
--	ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
-+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Write the data into MMD's selected register */
--	ret = bus->write(bus, 0, MII_MMD_DATA, data);
-+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			 MII_MMD_DATA, data);
- err:
- 	if (ret < 0)
- 		dev_err(&bus->dev,
-@@ -2684,16 +2692,19 @@ mt7531_setup(struct dsa_switch *ds)
- 	 * phy_[read,write]_mmd_indirect is called, we provide our own
- 	 * mt7531_ind_mmd_phy_[read,write] to complete this function.
- 	 */
--	val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
-+	val = mt7531_ind_c45_phy_read(priv,
-+				      MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
- 				      MDIO_MMD_VEND2, CORE_PLL_GROUP4);
- 	val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
- 	val &= ~MT7531_PHY_PLL_OFF;
--	mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
--				 CORE_PLL_GROUP4, val);
-+	mt7531_ind_c45_phy_write(priv,
-+				 MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+				 MDIO_MMD_VEND2, CORE_PLL_GROUP4, val);
- 
- 	/* Disable EEE advertisement on the switch PHYs. */
--	for (i = MT753X_CTRL_PHY_ADDR;
--	     i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
-+	for (i = MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr);
-+	     i < MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr) + MT7530_NUM_PHYS;
-+	     i++) {
- 		mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
- 					 0);
- 	}
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -629,7 +629,7 @@ enum mt7531_clk_skew {
- #define  MT7531_PHY_PLL_OFF		BIT(5)
- #define  MT7531_PHY_PLL_BYPASS_MODE	BIT(4)
- 
--#define MT753X_CTRL_PHY_ADDR		0
-+#define MT753X_CTRL_PHY_ADDR(addr)	((addr + 1) & 0x1f)
- 
- #define CORE_PLL_GROUP5			0x404
- #define  RG_LCDDS_PCW_NCPO1(x)		((x) & 0xffff)
-@@ -771,6 +771,7 @@ struct mt753x_info {
-  * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
-  * @create_sgmii:	Pointer to function creating SGMII PCS instance(s)
-  * @active_cpu_ports:	Holding the active CPU ports
-+ * @mdiodev:		The pointer to the MDIO device structure
-  */
- struct mt7530_priv {
- 	struct device		*dev;
-@@ -797,6 +798,7 @@ struct mt7530_priv {
- 	u32 irq_enable;
- 	int (*create_sgmii)(struct mt7530_priv *priv);
- 	u8 active_cpu_ports;
-+	struct mdio_device *mdiodev;
- };
- 
- struct mt7530_hw_vlan_entry {
diff --git a/target/linux/generic/backport-6.1/790-53-v6.10-net-dsa-mt7530-simplify-core-operations.patch b/target/linux/generic/backport-6.1/790-53-v6.10-net-dsa-mt7530-simplify-core-operations.patch
deleted file mode 100644
index d9d70f1d4df0..000000000000
--- a/target/linux/generic/backport-6.1/790-53-v6.10-net-dsa-mt7530-simplify-core-operations.patch
+++ /dev/null
@@ -1,186 +0,0 @@
-From 9764a08b3d260f4e7799d34bbfe64463db940d74 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Thu, 18 Apr 2024 08:35:31 +0300
-Subject: [PATCH 5/5] net: dsa: mt7530: simplify core operations
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The core_rmw() function calls core_read_mmd_indirect() to read the
-requested register, and then calls core_write_mmd_indirect() to write the
-requested value to the register. Because Clause 22 is used to access Clause
-45 registers, some operations on core_write_mmd_indirect() are
-unnecessarily run. Get rid of core_read_mmd_indirect() and
-core_write_mmd_indirect(), and run only the necessary operations on
-core_write() and core_rmw().
-
-Reviewed-by: Daniel Golle <daniel@makrotopia.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 108 ++++++++++++++++-----------------------
- 1 file changed, 43 insertions(+), 65 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -74,116 +74,94 @@ static const struct mt7530_mib_desc mt75
- 	MIB_DESC(1, 0xb8, "RxArlDrop"),
- };
- 
--/* Since phy_device has not yet been created and
-- * phy_{read,write}_mmd_indirect is not available, we provide our own
-- * core_{read,write}_mmd_indirect with core_{clear,write,set} wrappers
-- * to complete this function.
-- */
--static int
--core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
-+static void
-+mt7530_mutex_lock(struct mt7530_priv *priv)
-+{
-+	if (priv->bus)
-+		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
-+}
-+
-+static void
-+mt7530_mutex_unlock(struct mt7530_priv *priv)
-+{
-+	if (priv->bus)
-+		mutex_unlock(&priv->bus->mdio_lock);
-+}
-+
-+static void
-+core_write(struct mt7530_priv *priv, u32 reg, u32 val)
- {
- 	struct mii_bus *bus = priv->bus;
--	int value, ret;
-+	int ret;
-+
-+	mt7530_mutex_lock(priv);
- 
- 	/* Write the desired MMD Devad */
- 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
--			 MII_MMD_CTRL, devad);
-+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Write the desired MMD register address */
- 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
--			 MII_MMD_DATA, prtad);
-+			 MII_MMD_DATA, reg);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Select the Function : DATA with no post increment */
- 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
--			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
-+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
- 	if (ret < 0)
- 		goto err;
- 
--	/* Read the content of the MMD's selected register */
--	value = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
--			  MII_MMD_DATA);
--
--	return value;
-+	/* Write the data into MMD's selected register */
-+	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			 MII_MMD_DATA, val);
- err:
--	dev_err(&bus->dev,  "failed to read mmd register\n");
-+	if (ret < 0)
-+		dev_err(&bus->dev, "failed to write mmd register\n");
- 
--	return ret;
-+	mt7530_mutex_unlock(priv);
- }
- 
--static int
--core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
--			int devad, u32 data)
-+static void
-+core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
- {
- 	struct mii_bus *bus = priv->bus;
-+	u32 val;
- 	int ret;
- 
-+	mt7530_mutex_lock(priv);
-+
- 	/* Write the desired MMD Devad */
- 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
--			 MII_MMD_CTRL, devad);
-+			 MII_MMD_CTRL, MDIO_MMD_VEND2);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Write the desired MMD register address */
- 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
--			 MII_MMD_DATA, prtad);
-+			 MII_MMD_DATA, reg);
- 	if (ret < 0)
- 		goto err;
- 
- 	/* Select the Function : DATA with no post increment */
- 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
--			 MII_MMD_CTRL, devad | MII_MMD_CTRL_NOINCR);
-+			 MII_MMD_CTRL, MDIO_MMD_VEND2 | MII_MMD_CTRL_NOINCR);
- 	if (ret < 0)
- 		goto err;
- 
-+	/* Read the content of the MMD's selected register */
-+	val = bus->read(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
-+			MII_MMD_DATA);
-+	val &= ~mask;
-+	val |= set;
- 	/* Write the data into MMD's selected register */
- 	ret = bus->write(bus, MT753X_CTRL_PHY_ADDR(priv->mdiodev->addr),
--			 MII_MMD_DATA, data);
-+			 MII_MMD_DATA, val);
- err:
- 	if (ret < 0)
--		dev_err(&bus->dev,
--			"failed to write mmd register\n");
--	return ret;
--}
--
--static void
--mt7530_mutex_lock(struct mt7530_priv *priv)
--{
--	if (priv->bus)
--		mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
--}
--
--static void
--mt7530_mutex_unlock(struct mt7530_priv *priv)
--{
--	if (priv->bus)
--		mutex_unlock(&priv->bus->mdio_lock);
--}
--
--static void
--core_write(struct mt7530_priv *priv, u32 reg, u32 val)
--{
--	mt7530_mutex_lock(priv);
--
--	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
--
--	mt7530_mutex_unlock(priv);
--}
--
--static void
--core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
--{
--	u32 val;
--
--	mt7530_mutex_lock(priv);
--
--	val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
--	val &= ~mask;
--	val |= set;
--	core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
-+		dev_err(&bus->dev, "failed to write mmd register\n");
- 
- 	mt7530_mutex_unlock(priv);
- }
diff --git a/target/linux/generic/backport-6.1/790-54-v6.10-net-dsa-mt7530-disable-EEE-abilities-on-failure-on-M.patch b/target/linux/generic/backport-6.1/790-54-v6.10-net-dsa-mt7530-disable-EEE-abilities-on-failure-on-M.patch
deleted file mode 100644
index 44cf60cf1487..000000000000
--- a/target/linux/generic/backport-6.1/790-54-v6.10-net-dsa-mt7530-disable-EEE-abilities-on-failure-on-M.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From 856e8954a0a88d1a4d2b43e9002b9249131a156f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:08 +0300
-Subject: [PATCH 01/15] net: dsa: mt7530: disable EEE abilities on failure on
- MT7531 and MT7988
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 bits let the
-PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits determine the 1G/100 EEE
-abilities of the MAC. If MT7531_FORCE_EEE1G and MT7531_FORCE_EEE100 are
-unset, the abilities are left to be determined by PHY auto polling.
-
-The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
-made it so that the PMCR_FORCE_EEE1G and PMCR_FORCE_EEE100 bits are set on
-mt753x_phylink_mac_link_up(). But it did not set the MT7531_FORCE_EEE1G and
-MT7531_FORCE_EEE100 bits. Because of this, the EEE abilities will be
-determined by PHY auto polling, regardless of the result of phy_init_eee().
-
-Define these bits and add them to the MT7531_FORCE_MODE mask which is set
-in mt7531_setup_common(). With this, there won't be any EEE abilities set
-when phy_init_eee() returns a negative value.
-
-Thanks to Russell for explaining when phy_init_eee() could return a
-negative value below.
-
-Looking at phy_init_eee(), it could return a negative value when:
-
-1. phydev->drv is NULL
-2. if genphy_c45_eee_is_active() returns negative
-3. if genphy_c45_eee_is_active() returns zero, it returns -EPROTONOSUPPORT
-4. if phy_set_bits_mmd() fails (e.g. communication error with the PHY)
-
-If we then look at genphy_c45_eee_is_active(), then:
-
-genphy_c45_read_eee_adv() and genphy_c45_read_eee_lpa() propagate their
-non-zero return values, otherwise this function returns zero or positive
-integer.
-
-If we then look at genphy_c45_read_eee_adv(), then a failure of
-phy_read_mmd() would cause a negative value to be returned.
-
-Looking at genphy_c45_read_eee_lpa(), the same is true.
-
-So, it can be summarised as:
-
-- phydev->drv is NULL
-- there is a communication error accessing the PHY
-- EEE is not active
-
-otherwise, it returns zero on success.
-
-If one wishes to determine whether an error occurred vs EEE not being
-supported through negotiation for the negotiated speed, if it returns
--EPROTONOSUPPORT in the latter case. Other error codes mean either the
-driver has been unloaded or communication error.
-
-In conclusion, determining the EEE abilities by PHY auto polling shouldn't
-result in having any EEE abilities enabled, when one of the last two
-situations in the summary happens. And it seems that if phydev->drv is
-NULL, there would be bigger problems with the device than a broken link. So
-this is not a bugfix.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.h | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -328,11 +328,15 @@ enum mt7530_vlan_port_acc_frm {
- #define  MT7531_FORCE_DPX		BIT(29)
- #define  MT7531_FORCE_RX_FC		BIT(28)
- #define  MT7531_FORCE_TX_FC		BIT(27)
-+#define  MT7531_FORCE_EEE100		BIT(26)
-+#define  MT7531_FORCE_EEE1G		BIT(25)
- #define  MT7531_FORCE_MODE		(MT7531_FORCE_LNK | \
- 					 MT7531_FORCE_SPD | \
- 					 MT7531_FORCE_DPX | \
- 					 MT7531_FORCE_RX_FC | \
--					 MT7531_FORCE_TX_FC)
-+					 MT7531_FORCE_TX_FC | \
-+					 MT7531_FORCE_EEE100 | \
-+					 MT7531_FORCE_EEE1G)
- #define  PMCR_LINK_SETTINGS_MASK	(PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
- 					 PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
- 					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
diff --git a/target/linux/generic/backport-6.1/790-55-v6.10-net-dsa-mt7530-refactor-MT7530_PMCR_P.patch b/target/linux/generic/backport-6.1/790-55-v6.10-net-dsa-mt7530-refactor-MT7530_PMCR_P.patch
deleted file mode 100644
index 158e5f8c0080..000000000000
--- a/target/linux/generic/backport-6.1/790-55-v6.10-net-dsa-mt7530-refactor-MT7530_PMCR_P.patch
+++ /dev/null
@@ -1,200 +0,0 @@
-From 712ad00d2f43814c81a7abfcbc339690a05fb6a0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:09 +0300
-Subject: [PATCH 02/15] net: dsa: mt7530: refactor MT7530_PMCR_P()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_PMCR_P() registers are on MT7530, MT7531, and the switch on the
-MT7988 SoC. Rename the definition for them to MT753X_PMCR_P(). Bit 15 is
-for MT7530 only. Add MT7530 prefix to the definition for bit 15.
-
-Use GENMASK and FIELD_PREP for PMCR_IFG_XMIT().
-
-Rename PMCR_TX_EN and PMCR_RX_EN to PMCR_MAC_TX_EN and PMCR_MAC_TX_EN to
-follow the naming on the "MT7621 Giga Switch Programming Guide v0.3",
-"MT7531 Reference Manual for Development Board v1.0", and "MT7988A Wi-Fi 7
-Generation Router Platform: Datasheet (Open Version) v0.1" documents.
-
-These documents show that PMCR_RX_FC_EN is at bit 5. Correct this along
-with renaming it to PMCR_FORCE_RX_FC_EN, and the same for PMCR_TX_FC_EN.
-
-Remove PMCR_SPEED_MASK which doesn't have a use.
-
-Rename the force mode definitions for MT7531 to FORCE_MODE. Add MASK at the
-end for the mask that includes all force mode definitions.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 24 ++++++++---------
- drivers/net/dsa/mt7530.h | 58 +++++++++++++++++++++-------------------
- 2 files changed, 42 insertions(+), 40 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -903,7 +903,7 @@ static void mt7530_setup_port5(struct ds
- 		val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
- 
- 		/* Setup the MAC by default for the cpu port */
--		mt7530_write(priv, MT7530_PMCR_P(5), 0x56300);
-+		mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
- 		break;
- 	case P5_INTF_SEL_GMAC5:
- 		/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
-@@ -2449,8 +2449,8 @@ mt7530_setup(struct dsa_switch *ds)
- 		/* Clear link settings and enable force mode to force link down
- 		 * on all ports until they're enabled later.
- 		 */
--		mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
--			   PMCR_FORCE_MODE, PMCR_FORCE_MODE);
-+		mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-+			   MT7530_FORCE_MODE, MT7530_FORCE_MODE);
- 
- 		/* Disable forwarding by default on all ports */
- 		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
-@@ -2560,8 +2560,8 @@ mt7531_setup_common(struct dsa_switch *d
- 		/* Clear link settings and enable force mode to force link down
- 		 * on all ports until they're enabled later.
- 		 */
--		mt7530_rmw(priv, MT7530_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
--			   MT7531_FORCE_MODE, MT7531_FORCE_MODE);
-+		mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
-+			   MT7531_FORCE_MODE_MASK, MT7531_FORCE_MODE_MASK);
- 
- 		/* Disable forwarding by default on all ports */
- 		mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
-@@ -2644,7 +2644,7 @@ mt7531_setup(struct dsa_switch *ds)
- 
- 	/* Force link down on all ports before internal reset */
- 	for (i = 0; i < MT7530_NUM_PORTS; i++)
--		mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
-+		mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
- 
- 	/* Reset the switch through internal reset */
- 	mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST);
-@@ -2886,7 +2886,7 @@ mt753x_phylink_mac_config(struct phylink
- 
- 	/* Are we connected to external phy */
- 	if (port == 5 && dsa_is_user_port(ds, 5))
--		mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY);
-+		mt7530_set(priv, MT753X_PMCR_P(port), PMCR_EXT_PHY);
- }
- 
- static void mt753x_phylink_mac_link_down(struct phylink_config *config,
-@@ -2896,7 +2896,7 @@ static void mt753x_phylink_mac_link_down
- 	struct dsa_port *dp = dsa_phylink_to_port(config);
- 	struct mt7530_priv *priv = dp->ds->priv;
- 
--	mt7530_clear(priv, MT7530_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
-+	mt7530_clear(priv, MT753X_PMCR_P(dp->index), PMCR_LINK_SETTINGS_MASK);
- }
- 
- static void mt753x_phylink_mac_link_up(struct phylink_config *config,
-@@ -2910,7 +2910,7 @@ static void mt753x_phylink_mac_link_up(s
- 	struct mt7530_priv *priv = dp->ds->priv;
- 	u32 mcr;
- 
--	mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
-+	mcr = PMCR_MAC_RX_EN | PMCR_MAC_TX_EN | PMCR_FORCE_LNK;
- 
- 	switch (speed) {
- 	case SPEED_1000:
-@@ -2925,9 +2925,9 @@ static void mt753x_phylink_mac_link_up(s
- 	if (duplex == DUPLEX_FULL) {
- 		mcr |= PMCR_FORCE_FDX;
- 		if (tx_pause)
--			mcr |= PMCR_TX_FC_EN;
-+			mcr |= PMCR_FORCE_TX_FC_EN;
- 		if (rx_pause)
--			mcr |= PMCR_RX_FC_EN;
-+			mcr |= PMCR_FORCE_RX_FC_EN;
- 	}
- 
- 	if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) {
-@@ -2942,7 +2942,7 @@ static void mt753x_phylink_mac_link_up(s
- 		}
- 	}
- 
--	mt7530_set(priv, MT7530_PMCR_P(dp->index), mcr);
-+	mt7530_set(priv, MT753X_PMCR_P(dp->index), mcr);
- }
- 
- static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -304,44 +304,46 @@ enum mt7530_vlan_port_acc_frm {
- #define  G0_PORT_VID_DEF		G0_PORT_VID(0)
- 
- /* Register for port MAC control register */
--#define MT7530_PMCR_P(x)		(0x3000 + ((x) * 0x100))
--#define  PMCR_IFG_XMIT(x)		(((x) & 0x3) << 18)
-+#define MT753X_PMCR_P(x)		(0x3000 + ((x) * 0x100))
-+#define  PMCR_IFG_XMIT_MASK		GENMASK(19, 18)
-+#define  PMCR_IFG_XMIT(x)		FIELD_PREP(PMCR_IFG_XMIT_MASK, x)
- #define  PMCR_EXT_PHY			BIT(17)
- #define  PMCR_MAC_MODE			BIT(16)
--#define  PMCR_FORCE_MODE		BIT(15)
--#define  PMCR_TX_EN			BIT(14)
--#define  PMCR_RX_EN			BIT(13)
-+#define  MT7530_FORCE_MODE		BIT(15)
-+#define  PMCR_MAC_TX_EN			BIT(14)
-+#define  PMCR_MAC_RX_EN			BIT(13)
- #define  PMCR_BACKOFF_EN		BIT(9)
- #define  PMCR_BACKPR_EN			BIT(8)
- #define  PMCR_FORCE_EEE1G		BIT(7)
- #define  PMCR_FORCE_EEE100		BIT(6)
--#define  PMCR_TX_FC_EN			BIT(5)
--#define  PMCR_RX_FC_EN			BIT(4)
-+#define  PMCR_FORCE_RX_FC_EN		BIT(5)
-+#define  PMCR_FORCE_TX_FC_EN		BIT(4)
- #define  PMCR_FORCE_SPEED_1000		BIT(3)
- #define  PMCR_FORCE_SPEED_100		BIT(2)
- #define  PMCR_FORCE_FDX			BIT(1)
- #define  PMCR_FORCE_LNK			BIT(0)
--#define  PMCR_SPEED_MASK		(PMCR_FORCE_SPEED_100 | \
--					 PMCR_FORCE_SPEED_1000)
--#define  MT7531_FORCE_LNK		BIT(31)
--#define  MT7531_FORCE_SPD		BIT(30)
--#define  MT7531_FORCE_DPX		BIT(29)
--#define  MT7531_FORCE_RX_FC		BIT(28)
--#define  MT7531_FORCE_TX_FC		BIT(27)
--#define  MT7531_FORCE_EEE100		BIT(26)
--#define  MT7531_FORCE_EEE1G		BIT(25)
--#define  MT7531_FORCE_MODE		(MT7531_FORCE_LNK | \
--					 MT7531_FORCE_SPD | \
--					 MT7531_FORCE_DPX | \
--					 MT7531_FORCE_RX_FC | \
--					 MT7531_FORCE_TX_FC | \
--					 MT7531_FORCE_EEE100 | \
--					 MT7531_FORCE_EEE1G)
--#define  PMCR_LINK_SETTINGS_MASK	(PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
--					 PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
--					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
--					 PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
--					 PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
-+#define  MT7531_FORCE_MODE_LNK		BIT(31)
-+#define  MT7531_FORCE_MODE_SPD		BIT(30)
-+#define  MT7531_FORCE_MODE_DPX		BIT(29)
-+#define  MT7531_FORCE_MODE_RX_FC	BIT(28)
-+#define  MT7531_FORCE_MODE_TX_FC	BIT(27)
-+#define  MT7531_FORCE_MODE_EEE100	BIT(26)
-+#define  MT7531_FORCE_MODE_EEE1G	BIT(25)
-+#define  MT7531_FORCE_MODE_MASK		(MT7531_FORCE_MODE_LNK | \
-+					 MT7531_FORCE_MODE_SPD | \
-+					 MT7531_FORCE_MODE_DPX | \
-+					 MT7531_FORCE_MODE_RX_FC | \
-+					 MT7531_FORCE_MODE_TX_FC | \
-+					 MT7531_FORCE_MODE_EEE100 | \
-+					 MT7531_FORCE_MODE_EEE1G)
-+#define  PMCR_LINK_SETTINGS_MASK	(PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \
-+					 PMCR_FORCE_EEE1G | \
-+					 PMCR_FORCE_EEE100 | \
-+					 PMCR_FORCE_RX_FC_EN | \
-+					 PMCR_FORCE_TX_FC_EN | \
-+					 PMCR_FORCE_SPEED_1000 | \
-+					 PMCR_FORCE_SPEED_100 | \
-+					 PMCR_FORCE_FDX | PMCR_FORCE_LNK)
- 
- #define MT7530_PMEEECR_P(x)		(0x3004 + (x) * 0x100)
- #define  WAKEUP_TIME_1000(x)		(((x) & 0xFF) << 24)
diff --git a/target/linux/generic/backport-6.1/790-56-v6.10-net-dsa-mt7530-rename-p5_intf_sel-and-use-only-for-M.patch b/target/linux/generic/backport-6.1/790-56-v6.10-net-dsa-mt7530-rename-p5_intf_sel-and-use-only-for-M.patch
deleted file mode 100644
index 9a0ce7c36c70..000000000000
--- a/target/linux/generic/backport-6.1/790-56-v6.10-net-dsa-mt7530-rename-p5_intf_sel-and-use-only-for-M.patch
+++ /dev/null
@@ -1,185 +0,0 @@
-From 875ec5b67ab88e969b171e6e9ea803e3ed759614 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:10 +0300
-Subject: [PATCH 03/15] net: dsa: mt7530: rename p5_intf_sel and use only for
- MT7530 switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The p5_intf_sel pointer is used to store the information of whether PHY
-muxing is used or not. PHY muxing is a feature specific to port 5 of the
-MT7530 switch. Do not use it for other switch models.
-
-Rename the pointer to p5_mode to store the mode the port is being used in.
-Rename the p5_interface_select enum to mt7530_p5_mode, the string
-representation to mt7530_p5_mode_str, and the enum elements.
-
-If PHY muxing is not detected, the default mode, GMAC5, will be used.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 62 +++++++++++++++++-----------------------
- drivers/net/dsa/mt7530.h | 15 +++++-----
- 2 files changed, 33 insertions(+), 44 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -864,19 +864,15 @@ mt7530_set_ageing_time(struct dsa_switch
- 	return 0;
- }
- 
--static const char *p5_intf_modes(unsigned int p5_interface)
-+static const char *mt7530_p5_mode_str(unsigned int mode)
- {
--	switch (p5_interface) {
--	case P5_DISABLED:
--		return "DISABLED";
--	case P5_INTF_SEL_PHY_P0:
--		return "PHY P0";
--	case P5_INTF_SEL_PHY_P4:
--		return "PHY P4";
--	case P5_INTF_SEL_GMAC5:
--		return "GMAC5";
-+	switch (mode) {
-+	case MUX_PHY_P0:
-+		return "MUX PHY P0";
-+	case MUX_PHY_P4:
-+		return "MUX PHY P4";
- 	default:
--		return "unknown";
-+		return "GMAC5";
- 	}
- }
- 
-@@ -893,23 +889,23 @@ static void mt7530_setup_port5(struct ds
- 	val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
- 	val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
- 
--	switch (priv->p5_intf_sel) {
--	case P5_INTF_SEL_PHY_P0:
--		/* MT7530_P5_MODE_GPHY_P0: 2nd GMAC -> P5 -> P0 */
-+	switch (priv->p5_mode) {
-+	/* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
-+	case MUX_PHY_P0:
- 		val |= MHWTRAP_PHY0_SEL;
- 		fallthrough;
--	case P5_INTF_SEL_PHY_P4:
--		/* MT7530_P5_MODE_GPHY_P4: 2nd GMAC -> P5 -> P4 */
-+
-+	/* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
-+	case MUX_PHY_P4:
- 		val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
- 
- 		/* Setup the MAC by default for the cpu port */
- 		mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
- 		break;
--	case P5_INTF_SEL_GMAC5:
--		/* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */
--		val &= ~MHWTRAP_P5_DIS;
--		break;
-+
-+	/* GMAC5: P5 -> SoC MAC or external PHY */
- 	default:
-+		val &= ~MHWTRAP_P5_DIS;
- 		break;
- 	}
- 
-@@ -937,8 +933,8 @@ static void mt7530_setup_port5(struct ds
- 
- 	mt7530_write(priv, MT7530_MHWTRAP, val);
- 
--	dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n",
--		val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface));
-+	dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
-+		mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
- 
- 	mutex_unlock(&priv->reg_mutex);
- }
-@@ -2481,13 +2477,11 @@ mt7530_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
--	/* Setup port 5 */
--	if (!dsa_is_unused_port(ds, 5)) {
--		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
--	} else {
-+	/* Check for PHY muxing on port 5 */
-+	if (dsa_is_unused_port(ds, 5)) {
- 		/* Scan the ethernet nodes. Look for GMAC1, lookup the used PHY.
--		 * Set priv->p5_intf_sel to the appropriate value if PHY muxing
--		 * is detected.
-+		 * Set priv->p5_mode to the appropriate value if PHY muxing is
-+		 * detected.
- 		 */
- 		for_each_child_of_node(dn, mac_np) {
- 			if (!of_device_is_compatible(mac_np,
-@@ -2511,17 +2505,16 @@ mt7530_setup(struct dsa_switch *ds)
- 				}
- 				id = of_mdio_parse_addr(ds->dev, phy_node);
- 				if (id == 0)
--					priv->p5_intf_sel = P5_INTF_SEL_PHY_P0;
-+					priv->p5_mode = MUX_PHY_P0;
- 				if (id == 4)
--					priv->p5_intf_sel = P5_INTF_SEL_PHY_P4;
-+					priv->p5_mode = MUX_PHY_P4;
- 			}
- 			of_node_put(mac_np);
- 			of_node_put(phy_node);
- 			break;
- 		}
- 
--		if (priv->p5_intf_sel == P5_INTF_SEL_PHY_P0 ||
--		    priv->p5_intf_sel == P5_INTF_SEL_PHY_P4)
-+		if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
- 			mt7530_setup_port5(ds, interface);
- 	}
- 
-@@ -2659,9 +2652,6 @@ mt7531_setup(struct dsa_switch *ds)
- 			   MT7531_EXT_P_MDIO_12);
- 	}
- 
--	if (!dsa_is_unused_port(ds, 5))
--		priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
--
- 	mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
- 		   MT7531_GPIO0_INTERRUPT);
- 
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -708,12 +708,11 @@ struct mt7530_port {
- 	struct phylink_pcs *sgmii_pcs;
- };
- 
--/* Port 5 interface select definitions */
--enum p5_interface_select {
--	P5_DISABLED,
--	P5_INTF_SEL_PHY_P0,
--	P5_INTF_SEL_PHY_P4,
--	P5_INTF_SEL_GMAC5,
-+/* Port 5 mode definitions of the MT7530 switch */
-+enum mt7530_p5_mode {
-+	GMAC5,
-+	MUX_PHY_P0,
-+	MUX_PHY_P4,
- };
- 
- struct mt7530_priv;
-@@ -769,7 +768,7 @@ struct mt753x_info {
-  * @ports:		Holding the state among ports
-  * @reg_mutex:		The lock for protecting among process accessing
-  *			registers
-- * @p5_intf_sel:	Holding the current port 5 interface select
-+ * @p5_mode:		Holding the current mode of port 5 of the MT7530 switch
-  * @p5_sgmii:		Flag for distinguishing if port 5 of the MT7531 switch
-  *			has got SGMII
-  * @irq:		IRQ number of the switch
-@@ -791,7 +790,7 @@ struct mt7530_priv {
- 	const struct mt753x_info *info;
- 	unsigned int		id;
- 	bool			mcm;
--	enum p5_interface_select p5_intf_sel;
-+	enum mt7530_p5_mode	p5_mode;
- 	bool			p5_sgmii;
- 	u8			mirror_rx;
- 	u8			mirror_tx;
diff --git a/target/linux/generic/backport-6.1/790-57-v6.10-net-dsa-mt7530-rename-mt753x_bpdu_port_fw-enum-to-mt.patch b/target/linux/generic/backport-6.1/790-57-v6.10-net-dsa-mt7530-rename-mt753x_bpdu_port_fw-enum-to-mt.patch
deleted file mode 100644
index c8ffd5f07c27..000000000000
--- a/target/linux/generic/backport-6.1/790-57-v6.10-net-dsa-mt7530-rename-mt753x_bpdu_port_fw-enum-to-mt.patch
+++ /dev/null
@@ -1,169 +0,0 @@
-From 83fe3df057e641cd0e88425e579d7a5a370ca430 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:11 +0300
-Subject: [PATCH 04/15] net: dsa: mt7530: rename mt753x_bpdu_port_fw enum to
- mt753x_to_cpu_fw
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mt753x_bpdu_port_fw enum is globally used for manipulating the process
-of deciding the forwardable ports, specifically concerning the CPU port(s).
-Therefore, rename it and the values in it to mt753x_to_cpu_fw.
-
-Change FOLLOW_MFC to SYSTEM_DEFAULT to be on par with the switch documents.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 44 ++++++++++-------------
- drivers/net/dsa/mt7530.h | 76 ++++++++++++++++++++--------------------
- 2 files changed, 56 insertions(+), 64 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1114,42 +1114,34 @@ mt753x_trap_frames(struct mt7530_priv *p
- 	 * VLAN-untagged.
- 	 */
- 	mt7530_rmw(priv, MT753X_BPC,
--		   MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
--			   MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
--			   MT753X_BPDU_PORT_FW_MASK,
--		   MT753X_PAE_BPDU_FR |
--			   MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
--			   MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
--			   MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
--			   MT753X_BPDU_CPU_ONLY);
-+		   PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK |
-+			   BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK,
-+		   PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+			   PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) |
-+			   BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+			   TO_CPU_FW_CPU_ONLY);
- 
- 	/* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
- 	 * them VLAN-untagged.
- 	 */
- 	mt7530_rmw(priv, MT753X_RGAC1,
--		   MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
--			   MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
--			   MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
--		   MT753X_R02_BPDU_FR |
--			   MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
--			   MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
--			   MT753X_R01_BPDU_FR |
--			   MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
--			   MT753X_BPDU_CPU_ONLY);
-+		   R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK |
-+			   R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK,
-+		   R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+			   R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR |
-+			   R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+			   TO_CPU_FW_CPU_ONLY);
- 
- 	/* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
- 	 * them VLAN-untagged.
- 	 */
- 	mt7530_rmw(priv, MT753X_RGAC2,
--		   MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
--			   MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
--			   MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
--		   MT753X_R0E_BPDU_FR |
--			   MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
--			   MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
--			   MT753X_R03_BPDU_FR |
--			   MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
--			   MT753X_BPDU_CPU_ONLY);
-+		   R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK |
-+			   R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK,
-+		   R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+			   R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR |
-+			   R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
-+			   TO_CPU_FW_CPU_ONLY);
- }
- 
- static void
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -67,47 +67,47 @@ enum mt753x_id {
- #define MT753X_MIRROR_MASK(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
- 					 MT7531_MIRROR_MASK : MIRROR_MASK)
- 
--/* Registers for BPDU and PAE frame control*/
-+/* Register for BPDU and PAE frame control */
- #define MT753X_BPC			0x24
--#define  MT753X_PAE_BPDU_FR		BIT(25)
--#define  MT753X_PAE_EG_TAG_MASK		GENMASK(24, 22)
--#define  MT753X_PAE_EG_TAG(x)		FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
--#define  MT753X_PAE_PORT_FW_MASK	GENMASK(18, 16)
--#define  MT753X_PAE_PORT_FW(x)		FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x)
--#define  MT753X_BPDU_EG_TAG_MASK	GENMASK(8, 6)
--#define  MT753X_BPDU_EG_TAG(x)		FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
--#define  MT753X_BPDU_PORT_FW_MASK	GENMASK(2, 0)
-+#define  PAE_BPDU_FR			BIT(25)
-+#define  PAE_EG_TAG_MASK		GENMASK(24, 22)
-+#define  PAE_EG_TAG(x)			FIELD_PREP(PAE_EG_TAG_MASK, x)
-+#define  PAE_PORT_FW_MASK		GENMASK(18, 16)
-+#define  PAE_PORT_FW(x)			FIELD_PREP(PAE_PORT_FW_MASK, x)
-+#define  BPDU_EG_TAG_MASK		GENMASK(8, 6)
-+#define  BPDU_EG_TAG(x)			FIELD_PREP(BPDU_EG_TAG_MASK, x)
-+#define  BPDU_PORT_FW_MASK		GENMASK(2, 0)
- 
--/* Register for :01 and :02 MAC DA frame control */
-+/* Register for 01-80-C2-00-00-[01,02] MAC DA frame control */
- #define MT753X_RGAC1			0x28
--#define  MT753X_R02_BPDU_FR		BIT(25)
--#define  MT753X_R02_EG_TAG_MASK		GENMASK(24, 22)
--#define  MT753X_R02_EG_TAG(x)		FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
--#define  MT753X_R02_PORT_FW_MASK	GENMASK(18, 16)
--#define  MT753X_R02_PORT_FW(x)		FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
--#define  MT753X_R01_BPDU_FR		BIT(9)
--#define  MT753X_R01_EG_TAG_MASK		GENMASK(8, 6)
--#define  MT753X_R01_EG_TAG(x)		FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
--#define  MT753X_R01_PORT_FW_MASK	GENMASK(2, 0)
-+#define  R02_BPDU_FR			BIT(25)
-+#define  R02_EG_TAG_MASK		GENMASK(24, 22)
-+#define  R02_EG_TAG(x)			FIELD_PREP(R02_EG_TAG_MASK, x)
-+#define  R02_PORT_FW_MASK		GENMASK(18, 16)
-+#define  R02_PORT_FW(x)			FIELD_PREP(R02_PORT_FW_MASK, x)
-+#define  R01_BPDU_FR			BIT(9)
-+#define  R01_EG_TAG_MASK		GENMASK(8, 6)
-+#define  R01_EG_TAG(x)			FIELD_PREP(R01_EG_TAG_MASK, x)
-+#define  R01_PORT_FW_MASK		GENMASK(2, 0)
- 
--/* Register for :03 and :0E MAC DA frame control */
-+/* Register for 01-80-C2-00-00-[03,0E] MAC DA frame control */
- #define MT753X_RGAC2			0x2c
--#define  MT753X_R0E_BPDU_FR		BIT(25)
--#define  MT753X_R0E_EG_TAG_MASK		GENMASK(24, 22)
--#define  MT753X_R0E_EG_TAG(x)		FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
--#define  MT753X_R0E_PORT_FW_MASK	GENMASK(18, 16)
--#define  MT753X_R0E_PORT_FW(x)		FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
--#define  MT753X_R03_BPDU_FR		BIT(9)
--#define  MT753X_R03_EG_TAG_MASK		GENMASK(8, 6)
--#define  MT753X_R03_EG_TAG(x)		FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
--#define  MT753X_R03_PORT_FW_MASK	GENMASK(2, 0)
-+#define  R0E_BPDU_FR			BIT(25)
-+#define  R0E_EG_TAG_MASK		GENMASK(24, 22)
-+#define  R0E_EG_TAG(x)			FIELD_PREP(R0E_EG_TAG_MASK, x)
-+#define  R0E_PORT_FW_MASK		GENMASK(18, 16)
-+#define  R0E_PORT_FW(x)			FIELD_PREP(R0E_PORT_FW_MASK, x)
-+#define  R03_BPDU_FR			BIT(9)
-+#define  R03_EG_TAG_MASK		GENMASK(8, 6)
-+#define  R03_EG_TAG(x)			FIELD_PREP(R03_EG_TAG_MASK, x)
-+#define  R03_PORT_FW_MASK		GENMASK(2, 0)
- 
--enum mt753x_bpdu_port_fw {
--	MT753X_BPDU_FOLLOW_MFC,
--	MT753X_BPDU_CPU_EXCLUDE = 4,
--	MT753X_BPDU_CPU_INCLUDE = 5,
--	MT753X_BPDU_CPU_ONLY = 6,
--	MT753X_BPDU_DROP = 7,
-+enum mt753x_to_cpu_fw {
-+	TO_CPU_FW_SYSTEM_DEFAULT,
-+	TO_CPU_FW_CPU_EXCLUDE = 4,
-+	TO_CPU_FW_CPU_INCLUDE = 5,
-+	TO_CPU_FW_CPU_ONLY = 6,
-+	TO_CPU_FW_DROP = 7,
- };
- 
- /* Registers for address table access */
diff --git a/target/linux/generic/backport-6.1/790-58-v6.10-net-dsa-mt7530-refactor-MT7530_MFC-and-MT7531_CFC-ad.patch b/target/linux/generic/backport-6.1/790-58-v6.10-net-dsa-mt7530-refactor-MT7530_MFC-and-MT7531_CFC-ad.patch
deleted file mode 100644
index c977fe46cd91..000000000000
--- a/target/linux/generic/backport-6.1/790-58-v6.10-net-dsa-mt7530-refactor-MT7530_MFC-and-MT7531_CFC-ad.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-From 1dbc1bdc2869e6d2929235c70d64e393aa5a5fa2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:12 +0300
-Subject: [PATCH 05/15] net: dsa: mt7530: refactor MT7530_MFC and MT7531_CFC,
- add MT7531_QRY_FFP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_MFC register is on MT7530, MT7531, and the switch on the MT7988
-SoC. Rename it to MT753X_MFC. Bit 7 to 0 differs between MT7530 and
-MT7531/MT7988. Add MT7530 prefix to these definitions, and define the
-IGMP/MLD Query Frame Flooding Ports mask for MT7531.
-
-Rename the cases of MIRROR_MASK to MIRROR_PORT_MASK.
-
-Move mt753x_mirror_port_get() and mt753x_port_mirror_set() to mt7530.h as
-macros.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 38 ++++++++--------------
- drivers/net/dsa/mt7530.h | 69 +++++++++++++++++++++++++---------------
- 2 files changed, 57 insertions(+), 50 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1154,7 +1154,7 @@ mt753x_cpu_port_enable(struct dsa_switch
- 		     PORT_SPEC_TAG);
- 
- 	/* Enable flooding on the CPU port */
--	mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
-+	mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) |
- 		   UNU_FFP(BIT(port)));
- 
- 	/* Add the CPU port to the CPU port bitmap for MT7531. Trapped frames
-@@ -1318,15 +1318,15 @@ mt7530_port_bridge_flags(struct dsa_swit
- 			   flags.val & BR_LEARNING ? 0 : SA_DIS);
- 
- 	if (flags.mask & BR_FLOOD)
--		mt7530_rmw(priv, MT7530_MFC, UNU_FFP(BIT(port)),
-+		mt7530_rmw(priv, MT753X_MFC, UNU_FFP(BIT(port)),
- 			   flags.val & BR_FLOOD ? UNU_FFP(BIT(port)) : 0);
- 
- 	if (flags.mask & BR_MCAST_FLOOD)
--		mt7530_rmw(priv, MT7530_MFC, UNM_FFP(BIT(port)),
-+		mt7530_rmw(priv, MT753X_MFC, UNM_FFP(BIT(port)),
- 			   flags.val & BR_MCAST_FLOOD ? UNM_FFP(BIT(port)) : 0);
- 
- 	if (flags.mask & BR_BCAST_FLOOD)
--		mt7530_rmw(priv, MT7530_MFC, BC_FFP(BIT(port)),
-+		mt7530_rmw(priv, MT753X_MFC, BC_FFP(BIT(port)),
- 			   flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0);
- 
- 	return 0;
-@@ -1862,20 +1862,6 @@ mt7530_port_vlan_del(struct dsa_switch *
- 	return 0;
- }
- 
--static int mt753x_mirror_port_get(unsigned int id, u32 val)
--{
--	return (id == ID_MT7531 || id == ID_MT7988) ?
--		       MT7531_MIRROR_PORT_GET(val) :
--		       MIRROR_PORT(val);
--}
--
--static int mt753x_mirror_port_set(unsigned int id, u32 val)
--{
--	return (id == ID_MT7531 || id == ID_MT7988) ?
--		       MT7531_MIRROR_PORT_SET(val) :
--		       MIRROR_PORT(val);
--}
--
- static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
- 				  struct dsa_mall_mirror_tc_entry *mirror,
- 				  bool ingress, struct netlink_ext_ack *extack)
-@@ -1891,14 +1877,14 @@ static int mt753x_port_mirror_add(struct
- 	val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
- 
- 	/* MT7530 only supports one monitor port */
--	monitor_port = mt753x_mirror_port_get(priv->id, val);
-+	monitor_port = MT753X_MIRROR_PORT_GET(priv->id, val);
- 	if (val & MT753X_MIRROR_EN(priv->id) &&
- 	    monitor_port != mirror->to_local_port)
- 		return -EEXIST;
- 
- 	val |= MT753X_MIRROR_EN(priv->id);
--	val &= ~MT753X_MIRROR_MASK(priv->id);
--	val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port);
-+	val &= ~MT753X_MIRROR_PORT_MASK(priv->id);
-+	val |= MT753X_MIRROR_PORT_SET(priv->id, mirror->to_local_port);
- 	mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
- 
- 	val = mt7530_read(priv, MT7530_PCR_P(port));
-@@ -2538,7 +2524,7 @@ mt7531_setup_common(struct dsa_switch *d
- 	mt7530_mib_reset(ds);
- 
- 	/* Disable flooding on all ports */
--	mt7530_clear(priv, MT7530_MFC, BC_FFP_MASK | UNM_FFP_MASK |
-+	mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
- 		     UNU_FFP_MASK);
- 
- 	for (i = 0; i < MT7530_NUM_PORTS; i++) {
-@@ -3100,10 +3086,12 @@ mt753x_conduit_state_change(struct dsa_s
- 	else
- 		priv->active_cpu_ports &= ~mask;
- 
--	if (priv->active_cpu_ports)
--		val = CPU_EN | CPU_PORT(__ffs(priv->active_cpu_ports));
-+	if (priv->active_cpu_ports) {
-+		val = MT7530_CPU_EN |
-+		      MT7530_CPU_PORT(__ffs(priv->active_cpu_ports));
-+	}
- 
--	mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val);
-+	mt7530_rmw(priv, MT753X_MFC, MT7530_CPU_EN | MT7530_CPU_PORT_MASK, val);
- }
- 
- static int mt7988_setup(struct dsa_switch *ds)
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -36,36 +36,55 @@ enum mt753x_id {
- #define MT753X_AGC			0xc
- #define  LOCAL_EN			BIT(7)
- 
--/* Registers to mac forward control for unknown frames */
--#define MT7530_MFC			0x10
--#define  BC_FFP(x)			(((x) & 0xff) << 24)
--#define  BC_FFP_MASK			BC_FFP(~0)
--#define  UNM_FFP(x)			(((x) & 0xff) << 16)
--#define  UNM_FFP_MASK			UNM_FFP(~0)
--#define  UNU_FFP(x)			(((x) & 0xff) << 8)
--#define  UNU_FFP_MASK			UNU_FFP(~0)
--#define  CPU_EN				BIT(7)
--#define  CPU_PORT_MASK			GENMASK(6, 4)
--#define  CPU_PORT(x)			FIELD_PREP(CPU_PORT_MASK, x)
--#define  MIRROR_EN			BIT(3)
--#define  MIRROR_PORT(x)			((x) & 0x7)
--#define  MIRROR_MASK			0x7
-+/* Register for MAC forward control */
-+#define MT753X_MFC			0x10
-+#define  BC_FFP_MASK			GENMASK(31, 24)
-+#define  BC_FFP(x)			FIELD_PREP(BC_FFP_MASK, x)
-+#define  UNM_FFP_MASK			GENMASK(23, 16)
-+#define  UNM_FFP(x)			FIELD_PREP(UNM_FFP_MASK, x)
-+#define  UNU_FFP_MASK			GENMASK(15, 8)
-+#define  UNU_FFP(x)			FIELD_PREP(UNU_FFP_MASK, x)
-+#define  MT7530_CPU_EN			BIT(7)
-+#define  MT7530_CPU_PORT_MASK		GENMASK(6, 4)
-+#define  MT7530_CPU_PORT(x)		FIELD_PREP(MT7530_CPU_PORT_MASK, x)
-+#define  MT7530_MIRROR_EN		BIT(3)
-+#define  MT7530_MIRROR_PORT_MASK	GENMASK(2, 0)
-+#define  MT7530_MIRROR_PORT_GET(x)	FIELD_GET(MT7530_MIRROR_PORT_MASK, x)
-+#define  MT7530_MIRROR_PORT_SET(x)	FIELD_PREP(MT7530_MIRROR_PORT_MASK, x)
-+#define  MT7531_QRY_FFP_MASK		GENMASK(7, 0)
-+#define  MT7531_QRY_FFP(x)		FIELD_PREP(MT7531_QRY_FFP_MASK, x)
- 
--/* Registers for CPU forward control */
-+/* Register for CPU forward control */
- #define MT7531_CFC			0x4
- #define  MT7531_MIRROR_EN		BIT(19)
--#define  MT7531_MIRROR_MASK		(MIRROR_MASK << 16)
--#define  MT7531_MIRROR_PORT_GET(x)	(((x) >> 16) & MIRROR_MASK)
--#define  MT7531_MIRROR_PORT_SET(x)	(((x) & MIRROR_MASK) << 16)
-+#define  MT7531_MIRROR_PORT_MASK	GENMASK(18, 16)
-+#define  MT7531_MIRROR_PORT_GET(x)	FIELD_GET(MT7531_MIRROR_PORT_MASK, x)
-+#define  MT7531_MIRROR_PORT_SET(x)	FIELD_PREP(MT7531_MIRROR_PORT_MASK, x)
- #define  MT7531_CPU_PMAP_MASK		GENMASK(7, 0)
- #define  MT7531_CPU_PMAP(x)		FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
- 
--#define MT753X_MIRROR_REG(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
--					 MT7531_CFC : MT7530_MFC)
--#define MT753X_MIRROR_EN(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
--					 MT7531_MIRROR_EN : MIRROR_EN)
--#define MT753X_MIRROR_MASK(id)		((((id) == ID_MT7531) || ((id) == ID_MT7988)) ?	\
--					 MT7531_MIRROR_MASK : MIRROR_MASK)
-+#define MT753X_MIRROR_REG(id)		((id == ID_MT7531 || \
-+					  id == ID_MT7988) ? \
-+					 MT7531_CFC : MT753X_MFC)
-+
-+#define MT753X_MIRROR_EN(id)		((id == ID_MT7531 || \
-+					  id == ID_MT7988) ? \
-+					 MT7531_MIRROR_EN : MT7530_MIRROR_EN)
-+
-+#define MT753X_MIRROR_PORT_MASK(id)	((id == ID_MT7531 || \
-+					  id == ID_MT7988) ? \
-+					 MT7531_MIRROR_PORT_MASK : \
-+					 MT7530_MIRROR_PORT_MASK)
-+
-+#define MT753X_MIRROR_PORT_GET(id, val)	((id == ID_MT7531 || \
-+					  id == ID_MT7988) ? \
-+					 MT7531_MIRROR_PORT_GET(val) : \
-+					 MT7530_MIRROR_PORT_GET(val))
-+
-+#define MT753X_MIRROR_PORT_SET(id, val)	((id == ID_MT7531 || \
-+					  id == ID_MT7988) ? \
-+					 MT7531_MIRROR_PORT_SET(val) : \
-+					 MT7530_MIRROR_PORT_SET(val))
- 
- /* Register for BPDU and PAE frame control */
- #define MT753X_BPC			0x24
diff --git a/target/linux/generic/backport-6.1/790-59-v6.10-net-dsa-mt7530-refactor-MT7530_HWTRAP-and-MT7530_MHW.patch b/target/linux/generic/backport-6.1/790-59-v6.10-net-dsa-mt7530-refactor-MT7530_HWTRAP-and-MT7530_MHW.patch
deleted file mode 100644
index 3c487d21f685..000000000000
--- a/target/linux/generic/backport-6.1/790-59-v6.10-net-dsa-mt7530-refactor-MT7530_HWTRAP-and-MT7530_MHW.patch
+++ /dev/null
@@ -1,257 +0,0 @@
-From 3ccf67597d35c06a7319e407b1c42f78a7966779 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:13 +0300
-Subject: [PATCH 06/15] net: dsa: mt7530: refactor MT7530_HWTRAP and
- MT7530_MHWTRAP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_HWTRAP and MT7530_MHWTRAP registers are on MT7530 and MT7531.
-It's called hardware trap on MT7530, software trap on MT7531. That's
-because some bits of the trap on MT7530 cannot be modified by software
-whilst all bits of the trap on MT7531 can. Rename the definitions for them
-to MT753X_TRAP and MT753X_MTRAP. Add MT7530 and MT7531 prefixes to the
-definitions specific to the switch model.
-
-Remove the extra parentheses from MT7530_XTAL_40MHZ and MT7530_XTAL_20MHZ.
-
-Rename MHWTRAP_PHY0_SEL, MHWTRAP_MANUAL, and MHWTRAP_PHY_ACCESS to be on
-par with the "MT7621 Giga Switch Programming Guide v0.3" document.
-
-Make an enumaration for the XTAL frequency. Set the data type of the xtal
-variable on mt7531_pll_setup() to it.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 59 ++++++++++++++++++++--------------------
- drivers/net/dsa/mt7530.h | 50 ++++++++++++++++------------------
- 2 files changed, 54 insertions(+), 55 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -417,23 +417,23 @@ mt7530_setup_port6(struct dsa_switch *ds
- 
- 	mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
- 
--	xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
-+	xtal = mt7530_read(priv, MT753X_MTRAP) & MT7530_XTAL_MASK;
- 
--	if (xtal == HWTRAP_XTAL_25MHZ)
-+	if (xtal == MT7530_XTAL_25MHZ)
- 		ssc_delta = 0x57;
- 	else
- 		ssc_delta = 0x87;
- 
- 	if (priv->id == ID_MT7621) {
- 		/* PLL frequency: 125MHz: 1.0GBit */
--		if (xtal == HWTRAP_XTAL_40MHZ)
-+		if (xtal == MT7530_XTAL_40MHZ)
- 			ncpo1 = 0x0640;
--		if (xtal == HWTRAP_XTAL_25MHZ)
-+		if (xtal == MT7530_XTAL_25MHZ)
- 			ncpo1 = 0x0a00;
- 	} else { /* PLL frequency: 250MHz: 2.0Gbit */
--		if (xtal == HWTRAP_XTAL_40MHZ)
-+		if (xtal == MT7530_XTAL_40MHZ)
- 			ncpo1 = 0x0c80;
--		if (xtal == HWTRAP_XTAL_25MHZ)
-+		if (xtal == MT7530_XTAL_25MHZ)
- 			ncpo1 = 0x1400;
- 	}
- 
-@@ -456,19 +456,20 @@ mt7530_setup_port6(struct dsa_switch *ds
- static void
- mt7531_pll_setup(struct mt7530_priv *priv)
- {
-+	enum mt7531_xtal_fsel xtal;
- 	u32 top_sig;
- 	u32 hwstrap;
--	u32 xtal;
- 	u32 val;
- 
- 	val = mt7530_read(priv, MT7531_CREV);
- 	top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
--	hwstrap = mt7530_read(priv, MT7531_HWTRAP);
-+	hwstrap = mt7530_read(priv, MT753X_TRAP);
- 	if ((val & CHIP_REV_M) > 0)
--		xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ :
--						    HWTRAP_XTAL_FSEL_25MHZ;
-+		xtal = (top_sig & PAD_MCM_SMI_EN) ? MT7531_XTAL_FSEL_40MHZ :
-+						    MT7531_XTAL_FSEL_25MHZ;
- 	else
--		xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK;
-+		xtal = (hwstrap & MT7531_XTAL25) ? MT7531_XTAL_FSEL_25MHZ :
-+						   MT7531_XTAL_FSEL_40MHZ;
- 
- 	/* Step 1 : Disable MT7531 COREPLL */
- 	val = mt7530_read(priv, MT7531_PLLGP_EN);
-@@ -497,13 +498,13 @@ mt7531_pll_setup(struct mt7530_priv *pri
- 	usleep_range(25, 35);
- 
- 	switch (xtal) {
--	case HWTRAP_XTAL_FSEL_25MHZ:
-+	case MT7531_XTAL_FSEL_25MHZ:
- 		val = mt7530_read(priv, MT7531_PLLGP_CR0);
- 		val &= ~RG_COREPLL_SDM_PCW_M;
- 		val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
- 		mt7530_write(priv, MT7531_PLLGP_CR0, val);
- 		break;
--	case HWTRAP_XTAL_FSEL_40MHZ:
-+	case MT7531_XTAL_FSEL_40MHZ:
- 		val = mt7530_read(priv, MT7531_PLLGP_CR0);
- 		val &= ~RG_COREPLL_SDM_PCW_M;
- 		val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
-@@ -884,20 +885,20 @@ static void mt7530_setup_port5(struct ds
- 
- 	mutex_lock(&priv->reg_mutex);
- 
--	val = mt7530_read(priv, MT7530_MHWTRAP);
-+	val = mt7530_read(priv, MT753X_MTRAP);
- 
--	val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS;
--	val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL;
-+	val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
-+	val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
- 
- 	switch (priv->p5_mode) {
- 	/* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
- 	case MUX_PHY_P0:
--		val |= MHWTRAP_PHY0_SEL;
-+		val |= MT7530_P5_PHY0_SEL;
- 		fallthrough;
- 
- 	/* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
- 	case MUX_PHY_P4:
--		val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS;
-+		val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
- 
- 		/* Setup the MAC by default for the cpu port */
- 		mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
-@@ -905,13 +906,13 @@ static void mt7530_setup_port5(struct ds
- 
- 	/* GMAC5: P5 -> SoC MAC or external PHY */
- 	default:
--		val &= ~MHWTRAP_P5_DIS;
-+		val &= ~MT7530_P5_DIS;
- 		break;
- 	}
- 
- 	/* Setup RGMII settings */
- 	if (phy_interface_mode_is_rgmii(interface)) {
--		val |= MHWTRAP_P5_RGMII_MODE;
-+		val |= MT7530_P5_RGMII_MODE;
- 
- 		/* P5 RGMII RX Clock Control: delay setting for 1000M */
- 		mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN);
-@@ -931,7 +932,7 @@ static void mt7530_setup_port5(struct ds
- 			     P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1));
- 	}
- 
--	mt7530_write(priv, MT7530_MHWTRAP, val);
-+	mt7530_write(priv, MT753X_MTRAP, val);
- 
- 	dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val,
- 		mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface));
-@@ -2370,7 +2371,7 @@ mt7530_setup(struct dsa_switch *ds)
- 	}
- 
- 	/* Waiting for MT7530 got to stable */
--	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
-+	INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
- 	ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
- 				 20, 1000000);
- 	if (ret < 0) {
-@@ -2385,7 +2386,7 @@ mt7530_setup(struct dsa_switch *ds)
- 		return -ENODEV;
- 	}
- 
--	if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_20MHZ) {
-+	if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_20MHZ) {
- 		dev_err(priv->dev,
- 			"MT7530 with a 20MHz XTAL is not supported!\n");
- 		return -EINVAL;
-@@ -2406,12 +2407,12 @@ mt7530_setup(struct dsa_switch *ds)
- 			   RD_TAP_MASK, RD_TAP(16));
- 
- 	/* Enable port 6 */
--	val = mt7530_read(priv, MT7530_MHWTRAP);
--	val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
--	val |= MHWTRAP_MANUAL;
--	mt7530_write(priv, MT7530_MHWTRAP, val);
-+	val = mt7530_read(priv, MT753X_MTRAP);
-+	val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
-+	val |= MT7530_CHG_TRAP;
-+	mt7530_write(priv, MT753X_MTRAP, val);
- 
--	if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
-+	if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
- 		mt7530_pll_setup(priv);
- 
- 	mt753x_trap_frames(priv);
-@@ -2591,7 +2592,7 @@ mt7531_setup(struct dsa_switch *ds)
- 	}
- 
- 	/* Waiting for MT7530 got to stable */
--	INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
-+	INIT_MT7530_DUMMY_POLL(&p, priv, MT753X_TRAP);
- 	ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
- 				 20, 1000000);
- 	if (ret < 0) {
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -495,32 +495,30 @@ enum mt7531_clk_skew {
- 	MT7531_CLK_SKEW_REVERSE = 3,
- };
- 
--/* Register for hw trap status */
--#define MT7530_HWTRAP			0x7800
--#define  HWTRAP_XTAL_MASK		(BIT(10) | BIT(9))
--#define  HWTRAP_XTAL_25MHZ		(BIT(10) | BIT(9))
--#define  HWTRAP_XTAL_40MHZ		(BIT(10))
--#define  HWTRAP_XTAL_20MHZ		(BIT(9))
-+/* Register for trap status */
-+#define MT753X_TRAP			0x7800
-+#define  MT7530_XTAL_MASK		(BIT(10) | BIT(9))
-+#define  MT7530_XTAL_25MHZ		(BIT(10) | BIT(9))
-+#define  MT7530_XTAL_40MHZ		BIT(10)
-+#define  MT7530_XTAL_20MHZ		BIT(9)
-+#define  MT7531_XTAL25			BIT(7)
- 
--#define MT7531_HWTRAP			0x7800
--#define  HWTRAP_XTAL_FSEL_MASK		BIT(7)
--#define  HWTRAP_XTAL_FSEL_25MHZ		BIT(7)
--#define  HWTRAP_XTAL_FSEL_40MHZ		0
--/* Unique fields of (M)HWSTRAP for MT7531 */
--#define  XTAL_FSEL_S			7
--#define  XTAL_FSEL_M			BIT(7)
--#define  PHY_EN				BIT(6)
--#define  CHG_STRAP			BIT(8)
-+/* Register for trap modification */
-+#define MT753X_MTRAP			0x7804
-+#define  MT7530_P5_PHY0_SEL		BIT(20)
-+#define  MT7530_CHG_TRAP		BIT(16)
-+#define  MT7530_P5_MAC_SEL		BIT(13)
-+#define  MT7530_P6_DIS			BIT(8)
-+#define  MT7530_P5_RGMII_MODE		BIT(7)
-+#define  MT7530_P5_DIS			BIT(6)
-+#define  MT7530_PHY_INDIRECT_ACCESS	BIT(5)
-+#define  MT7531_CHG_STRAP		BIT(8)
-+#define  MT7531_PHY_EN			BIT(6)
- 
--/* Register for hw trap modification */
--#define MT7530_MHWTRAP			0x7804
--#define  MHWTRAP_PHY0_SEL		BIT(20)
--#define  MHWTRAP_MANUAL			BIT(16)
--#define  MHWTRAP_P5_MAC_SEL		BIT(13)
--#define  MHWTRAP_P6_DIS			BIT(8)
--#define  MHWTRAP_P5_RGMII_MODE		BIT(7)
--#define  MHWTRAP_P5_DIS			BIT(6)
--#define  MHWTRAP_PHY_ACCESS		BIT(5)
-+enum mt7531_xtal_fsel {
-+	MT7531_XTAL_FSEL_25MHZ,
-+	MT7531_XTAL_FSEL_40MHZ,
-+};
- 
- /* Register for TOP signal control */
- #define MT7530_TOP_SIG_CTRL		0x7808
diff --git a/target/linux/generic/backport-6.1/790-60-v6.10-net-dsa-mt7530-move-MT753X_MTRAP-operations-for-MT75.patch b/target/linux/generic/backport-6.1/790-60-v6.10-net-dsa-mt7530-move-MT753X_MTRAP-operations-for-MT75.patch
deleted file mode 100644
index cfc38f81d075..000000000000
--- a/target/linux/generic/backport-6.1/790-60-v6.10-net-dsa-mt7530-move-MT753X_MTRAP-operations-for-MT75.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From 2982f395c9a513b168f1e685588f70013cba2f5f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:14 +0300
-Subject: [PATCH 07/15] net: dsa: mt7530: move MT753X_MTRAP operations for
- MT7530
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On MT7530, the media-independent interfaces of port 5 and 6 are controlled
-by the MT7530_P5_DIS and MT7530_P6_DIS bits of the hardware trap. Deal with
-these bits only when the relevant port is being enabled or disabled. This
-ensures that these ports will be disabled when they are not in use.
-
-Do not set MT7530_CHG_TRAP on mt7530_setup_port5() as that's already being
-done on mt7530_setup().
-
-Instead of globally setting MT7530_P5_MAC_SEL, clear it, then set it only
-on the appropriate case.
-
-If PHY muxing is detected, clear MT7530_P5_DIS before calling
-mt7530_setup_port5().
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 38 +++++++++++++++++++++++++++-----------
- 1 file changed, 27 insertions(+), 11 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -887,8 +887,7 @@ static void mt7530_setup_port5(struct ds
- 
- 	val = mt7530_read(priv, MT753X_MTRAP);
- 
--	val |= MT7530_CHG_TRAP | MT7530_P5_MAC_SEL | MT7530_P5_DIS;
--	val &= ~MT7530_P5_RGMII_MODE & ~MT7530_P5_PHY0_SEL;
-+	val &= ~MT7530_P5_PHY0_SEL & ~MT7530_P5_MAC_SEL & ~MT7530_P5_RGMII_MODE;
- 
- 	switch (priv->p5_mode) {
- 	/* MUX_PHY_P0: P0 -> P5 -> SoC MAC */
-@@ -898,15 +897,13 @@ static void mt7530_setup_port5(struct ds
- 
- 	/* MUX_PHY_P4: P4 -> P5 -> SoC MAC */
- 	case MUX_PHY_P4:
--		val &= ~MT7530_P5_MAC_SEL & ~MT7530_P5_DIS;
--
- 		/* Setup the MAC by default for the cpu port */
- 		mt7530_write(priv, MT753X_PMCR_P(5), 0x56300);
- 		break;
- 
- 	/* GMAC5: P5 -> SoC MAC or external PHY */
- 	default:
--		val &= ~MT7530_P5_DIS;
-+		val |= MT7530_P5_MAC_SEL;
- 		break;
- 	}
- 
-@@ -1200,6 +1197,14 @@ mt7530_port_enable(struct dsa_switch *ds
- 
- 	mutex_unlock(&priv->reg_mutex);
- 
-+	if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
-+		return 0;
-+
-+	if (port == 5)
-+		mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
-+	else if (port == 6)
-+		mt7530_clear(priv, MT753X_MTRAP, MT7530_P6_DIS);
-+
- 	return 0;
- }
- 
-@@ -1218,6 +1223,14 @@ mt7530_port_disable(struct dsa_switch *d
- 		   PCR_MATRIX_CLR);
- 
- 	mutex_unlock(&priv->reg_mutex);
-+
-+	if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
-+		return;
-+
-+	if (port == 5)
-+		mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
-+	else if (port == 6)
-+		mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
- }
- 
- static int
-@@ -2406,11 +2419,11 @@ mt7530_setup(struct dsa_switch *ds)
- 		mt7530_rmw(priv, MT7530_TRGMII_RD(i),
- 			   RD_TAP_MASK, RD_TAP(16));
- 
--	/* Enable port 6 */
--	val = mt7530_read(priv, MT753X_MTRAP);
--	val &= ~MT7530_P6_DIS & ~MT7530_PHY_INDIRECT_ACCESS;
--	val |= MT7530_CHG_TRAP;
--	mt7530_write(priv, MT753X_MTRAP, val);
-+	/* Allow modifying the trap and directly access PHY registers via the
-+	 * MDIO bus the switch is on.
-+	 */
-+	mt7530_rmw(priv, MT753X_MTRAP, MT7530_CHG_TRAP |
-+		   MT7530_PHY_INDIRECT_ACCESS, MT7530_CHG_TRAP);
- 
- 	if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ)
- 		mt7530_pll_setup(priv);
-@@ -2493,8 +2506,11 @@ mt7530_setup(struct dsa_switch *ds)
- 			break;
- 		}
- 
--		if (priv->p5_mode == MUX_PHY_P0 || priv->p5_mode == MUX_PHY_P4)
-+		if (priv->p5_mode == MUX_PHY_P0 ||
-+		    priv->p5_mode == MUX_PHY_P4) {
-+			mt7530_clear(priv, MT753X_MTRAP, MT7530_P5_DIS);
- 			mt7530_setup_port5(ds, interface);
-+		}
- 	}
- 
- #ifdef CONFIG_GPIOLIB
diff --git a/target/linux/generic/backport-6.1/790-61-v6.10-net-dsa-mt7530-return-mt7530_setup_mdio-mt7531_setup.patch b/target/linux/generic/backport-6.1/790-61-v6.10-net-dsa-mt7530-return-mt7530_setup_mdio-mt7531_setup.patch
deleted file mode 100644
index 178ac8022ffc..000000000000
--- a/target/linux/generic/backport-6.1/790-61-v6.10-net-dsa-mt7530-return-mt7530_setup_mdio-mt7531_setup.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 1f5669efca65564c7533704917f79003c6b36c9c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:15 +0300
-Subject: [PATCH 08/15] net: dsa: mt7530: return mt7530_setup_mdio &
- mt7531_setup_common on error
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mt7530_setup_mdio() and mt7531_setup_common() functions should be
-checked for errors. Return if the functions return a non-zero value.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2672,7 +2672,9 @@ mt7531_setup(struct dsa_switch *ds)
- 					 0);
- 	}
- 
--	mt7531_setup_common(ds);
-+	ret = mt7531_setup_common(ds);
-+	if (ret)
-+		return ret;
- 
- 	/* Setup VLAN ID 0 for VLAN-unaware bridges */
- 	ret = mt7530_setup_vlan0(priv);
-@@ -3031,6 +3033,8 @@ mt753x_setup(struct dsa_switch *ds)
- 	ret = mt7530_setup_mdio(priv);
- 	if (ret && priv->irq)
- 		mt7530_free_irq_common(priv);
-+	if (ret)
-+		return ret;
- 
- 	/* Initialise the PCS devices */
- 	for (i = 0; i < priv->ds->num_ports; i++) {
diff --git a/target/linux/generic/backport-6.1/790-62-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch b/target/linux/generic/backport-6.1/790-62-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch
deleted file mode 100644
index af8edf5a4273..000000000000
--- a/target/linux/generic/backport-6.1/790-62-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 6cc2d4ccd77509df74b7b8ef46bbc6ba0a571318 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:16 +0300
-Subject: [PATCH 09/15] net: dsa: mt7530: define MAC speed capabilities per
- switch model
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-With the support of the MT7988 SoC switch, the MAC speed capabilities
-defined on mt753x_phylink_get_caps() won't apply to all switch models
-anymore. Move them to more appropriate locations instead of overwriting
-config->mac_capabilities.
-
-Remove the comment on mt753x_phylink_get_caps() as it's become invalid with
-the support of MT7531 and MT7988 SoC switch.
-
-Add break to case 6 of mt7988_mac_port_get_caps() to be explicit.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2690,6 +2690,8 @@ mt7531_setup(struct dsa_switch *ds)
- static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port,
- 				     struct phylink_config *config)
- {
-+	config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
-+
- 	switch (port) {
- 	/* Ports which are connected to switch PHYs. There is no MII pinout. */
- 	case 0 ... 4:
-@@ -2721,6 +2723,8 @@ static void mt7531_mac_port_get_caps(str
- {
- 	struct mt7530_priv *priv = ds->priv;
- 
-+	config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
-+
- 	switch (port) {
- 	/* Ports which are connected to switch PHYs. There is no MII pinout. */
- 	case 0 ... 4:
-@@ -2760,14 +2764,17 @@ static void mt7988_mac_port_get_caps(str
- 	case 0 ... 3:
- 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
- 			  config->supported_interfaces);
-+
-+		config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
- 		break;
- 
- 	/* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
- 	case 6:
- 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
- 			  config->supported_interfaces);
--		config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
--					   MAC_10000FD;
-+
-+		config->mac_capabilities |= MAC_10000FD;
-+		break;
- 	}
- }
- 
-@@ -2937,9 +2944,7 @@ static void mt753x_phylink_get_caps(stru
- {
- 	struct mt7530_priv *priv = ds->priv;
- 
--	/* This switch only supports full-duplex at 1Gbps */
--	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
--				   MAC_10 | MAC_100 | MAC_1000FD;
-+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
- 
- 	/* This driver does not make use of the speed, duplex, pause or the
- 	 * advertisement in its mac_config, so it is safe to mark this driver
diff --git a/target/linux/generic/backport-6.1/790-63-v6.10-net-dsa-mt7530-get-rid-of-function-sanity-check.patch b/target/linux/generic/backport-6.1/790-63-v6.10-net-dsa-mt7530-get-rid-of-function-sanity-check.patch
deleted file mode 100644
index 3825952dc312..000000000000
--- a/target/linux/generic/backport-6.1/790-63-v6.10-net-dsa-mt7530-get-rid-of-function-sanity-check.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From dd0f15fc877c10567699190bce0f55e96f4ad6b5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:17 +0300
-Subject: [PATCH 10/15] net: dsa: mt7530: get rid of function sanity check
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Get rid of checking whether functions are filled properly. priv->info which
-is an mt753x_info structure is filled and checked for before this check.
-It's unnecessary checking whether it's filled properly.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3235,13 +3235,6 @@ mt7530_probe_common(struct mt7530_priv *
- 	if (!priv->info)
- 		return -EINVAL;
- 
--	/* Sanity check if these required device operations are filled
--	 * properly.
--	 */
--	if (!priv->info->sw_setup || !priv->info->phy_read ||
--	    !priv->info->phy_write || !priv->info->mac_port_get_caps)
--		return -EINVAL;
--
- 	priv->id = priv->info->id;
- 	priv->dev = dev;
- 	priv->ds->priv = priv;
diff --git a/target/linux/generic/backport-6.1/790-64-v6.10-net-dsa-mt7530-refactor-MT7530_PMEEECR_P.patch b/target/linux/generic/backport-6.1/790-64-v6.10-net-dsa-mt7530-refactor-MT7530_PMEEECR_P.patch
deleted file mode 100644
index df4745801410..000000000000
--- a/target/linux/generic/backport-6.1/790-64-v6.10-net-dsa-mt7530-refactor-MT7530_PMEEECR_P.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 2dff9759602b069f97ccc939e15a47ca051b2983 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:18 +0300
-Subject: [PATCH 11/15] net: dsa: mt7530: refactor MT7530_PMEEECR_P()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7530_PMEEECR_P() register is on MT7530, MT7531, and the switch on the
-MT7988 SoC. Rename the definition for them to MT753X_PMEEECR_P(). Use the
-FIELD_PREP and FIELD_GET macros. Rename GET_LPI_THRESH() and
-SET_LPI_THRESH() to LPI_THRESH_GET() and LPI_THRESH_SET().
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c |  8 ++++----
- drivers/net/dsa/mt7530.h | 13 +++++++------
- 2 files changed, 11 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -3062,10 +3062,10 @@ static int mt753x_get_mac_eee(struct dsa
- 			      struct ethtool_eee *e)
- {
- 	struct mt7530_priv *priv = ds->priv;
--	u32 eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
-+	u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
- 
- 	e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
--	e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
-+	e->tx_lpi_timer = LPI_THRESH_GET(eeecr);
- 
- 	return 0;
- }
-@@ -3079,11 +3079,11 @@ static int mt753x_set_mac_eee(struct dsa
- 	if (e->tx_lpi_timer > 0xFFF)
- 		return -EINVAL;
- 
--	set = SET_LPI_THRESH(e->tx_lpi_timer);
-+	set = LPI_THRESH_SET(e->tx_lpi_timer);
- 	if (!e->tx_lpi_enabled)
- 		/* Force LPI Mode without a delay */
- 		set |= LPI_MODE_EN;
--	mt7530_rmw(priv, MT7530_PMEEECR_P(port), mask, set);
-+	mt7530_rmw(priv, MT753X_PMEEECR_P(port), mask, set);
- 
- 	return 0;
- }
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -364,13 +364,14 @@ enum mt7530_vlan_port_acc_frm {
- 					 PMCR_FORCE_SPEED_100 | \
- 					 PMCR_FORCE_FDX | PMCR_FORCE_LNK)
- 
--#define MT7530_PMEEECR_P(x)		(0x3004 + (x) * 0x100)
--#define  WAKEUP_TIME_1000(x)		(((x) & 0xFF) << 24)
--#define  WAKEUP_TIME_100(x)		(((x) & 0xFF) << 16)
-+#define MT753X_PMEEECR_P(x)		(0x3004 + (x) * 0x100)
-+#define  WAKEUP_TIME_1000_MASK		GENMASK(31, 24)
-+#define  WAKEUP_TIME_1000(x)		FIELD_PREP(WAKEUP_TIME_1000_MASK, x)
-+#define  WAKEUP_TIME_100_MASK		GENMASK(23, 16)
-+#define  WAKEUP_TIME_100(x)		FIELD_PREP(WAKEUP_TIME_100_MASK, x)
- #define  LPI_THRESH_MASK		GENMASK(15, 4)
--#define  LPI_THRESH_SHT			4
--#define  SET_LPI_THRESH(x)		(((x) << LPI_THRESH_SHT) & LPI_THRESH_MASK)
--#define  GET_LPI_THRESH(x)		(((x) & LPI_THRESH_MASK) >> LPI_THRESH_SHT)
-+#define  LPI_THRESH_GET(x)		FIELD_GET(LPI_THRESH_MASK, x)
-+#define  LPI_THRESH_SET(x)		FIELD_PREP(LPI_THRESH_MASK, x)
- #define  LPI_MODE_EN			BIT(0)
- 
- #define MT7530_PMSR_P(x)		(0x3008 + (x) * 0x100)
diff --git a/target/linux/generic/backport-6.1/790-65-v6.10-net-dsa-mt7530-get-rid-of-mac_port_validate-member-o.patch b/target/linux/generic/backport-6.1/790-65-v6.10-net-dsa-mt7530-get-rid-of-mac_port_validate-member-o.patch
deleted file mode 100644
index 7ce2d4c04e4c..000000000000
--- a/target/linux/generic/backport-6.1/790-65-v6.10-net-dsa-mt7530-get-rid-of-mac_port_validate-member-o.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 21d67c2fabfe40baf33202d3287b67b6c16f8382 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:19 +0300
-Subject: [PATCH 12/15] net: dsa: mt7530: get rid of mac_port_validate member
- of mt753x_info
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mac_port_validate member of the mt753x_info structure is not being
-used, remove it. Improve the member description section in the process.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.h | 10 +++-------
- 1 file changed, 3 insertions(+), 7 deletions(-)
-
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -743,13 +743,12 @@ struct mt753x_pcs {
- 
- /* struct mt753x_info -	This is the main data structure for holding the specific
-  *			part for each supported device
-+ * @id:			Holding the identifier to a switch model
-+ * @pcs_ops:		Holding the pointer to the MAC PCS operations structure
-  * @sw_setup:		Holding the handler to a device initialization
-  * @phy_read:		Holding the way reading PHY port
-  * @phy_write:		Holding the way writing PHY port
-- * @phy_mode_supported:	Check if the PHY type is being supported on a certain
-- *			port
-- * @mac_port_validate:	Holding the way to set addition validate type for a
-- *			certan MAC port
-+ * @mac_port_get_caps:	Holding the handler that provides MAC capabilities
-  * @mac_port_config:	Holding the way setting up the PHY attribute to a
-  *			certain MAC port
-  */
-@@ -763,9 +762,6 @@ struct mt753x_info {
- 	int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val);
- 	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
- 				  struct phylink_config *config);
--	void (*mac_port_validate)(struct dsa_switch *ds, int port,
--				  phy_interface_t interface,
--				  unsigned long *supported);
- 	void (*mac_port_config)(struct dsa_switch *ds, int port,
- 				unsigned int mode,
- 				phy_interface_t interface);
diff --git a/target/linux/generic/backport-6.1/790-66-v6.10-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch b/target/linux/generic/backport-6.1/790-66-v6.10-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch
deleted file mode 100644
index e9512421c222..000000000000
--- a/target/linux/generic/backport-6.1/790-66-v6.10-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 6efc8ae3eb0363328f479191a0cf0dc12a16e090 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:20 +0300
-Subject: [PATCH 13/15] net: dsa: mt7530: use priv->ds->num_ports instead of
- MT7530_NUM_PORTS
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use priv->ds->num_ports on all for loops which configure the switch
-registers. In the future, the value of MT7530_NUM_PORTS will depend on
-priv->id. Therefore, this change prepares the subdriver for a simpler
-implementation.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1418,7 +1418,7 @@ mt7530_port_set_vlan_unaware(struct dsa_
- 	mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
- 		   G0_PORT_VID_DEF);
- 
--	for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+	for (i = 0; i < priv->ds->num_ports; i++) {
- 		if (dsa_is_user_port(ds, i) &&
- 		    dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) {
- 			all_user_ports_removed = false;
-@@ -2433,7 +2433,7 @@ mt7530_setup(struct dsa_switch *ds)
- 	/* Enable and reset MIB counters */
- 	mt7530_mib_reset(ds);
- 
--	for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+	for (i = 0; i < priv->ds->num_ports; i++) {
- 		/* Clear link settings and enable force mode to force link down
- 		 * on all ports until they're enabled later.
- 		 */
-@@ -2544,7 +2544,7 @@ mt7531_setup_common(struct dsa_switch *d
- 	mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK |
- 		     UNU_FFP_MASK);
- 
--	for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+	for (i = 0; i < priv->ds->num_ports; i++) {
- 		/* Clear link settings and enable force mode to force link down
- 		 * on all ports until they're enabled later.
- 		 */
-@@ -2631,7 +2631,7 @@ mt7531_setup(struct dsa_switch *ds)
- 	priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
- 
- 	/* Force link down on all ports before internal reset */
--	for (i = 0; i < MT7530_NUM_PORTS; i++)
-+	for (i = 0; i < priv->ds->num_ports; i++)
- 		mt7530_write(priv, MT753X_PMCR_P(i), MT7531_FORCE_MODE_LNK);
- 
- 	/* Reset the switch through internal reset */
diff --git a/target/linux/generic/backport-6.1/790-67-v6.10-net-dsa-mt7530-do-not-pass-port-variable-to-mt7531_r.patch b/target/linux/generic/backport-6.1/790-67-v6.10-net-dsa-mt7530-do-not-pass-port-variable-to-mt7531_r.patch
deleted file mode 100644
index 3b3330bdce80..000000000000
--- a/target/linux/generic/backport-6.1/790-67-v6.10-net-dsa-mt7530-do-not-pass-port-variable-to-mt7531_r.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 4794c12e3aefe05dd0063c2b6b0101854b143bac Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:21 +0300
-Subject: [PATCH 14/15] net: dsa: mt7530: do not pass port variable to
- mt7531_rgmii_setup()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The mt7531_rgmii_setup() function does not use the port variable, do not
-pass the variable to it.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2790,7 +2790,7 @@ mt7530_mac_config(struct dsa_switch *ds,
- 		mt7530_setup_port6(priv->ds, interface);
- }
- 
--static void mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
-+static void mt7531_rgmii_setup(struct mt7530_priv *priv,
- 			       phy_interface_t interface,
- 			       struct phy_device *phydev)
- {
-@@ -2841,7 +2841,7 @@ mt7531_mac_config(struct dsa_switch *ds,
- 	if (phy_interface_mode_is_rgmii(interface)) {
- 		dp = dsa_to_port(ds, port);
- 		phydev = dp->slave->phydev;
--		mt7531_rgmii_setup(priv, port, interface, phydev);
-+		mt7531_rgmii_setup(priv, interface, phydev);
- 	}
- }
- 
diff --git a/target/linux/generic/backport-6.1/790-68-v6.10-net-dsa-mt7530-explain-exposing-MDIO-bus-of-MT7531AE.patch b/target/linux/generic/backport-6.1/790-68-v6.10-net-dsa-mt7530-explain-exposing-MDIO-bus-of-MT7531AE.patch
deleted file mode 100644
index 6d28e5b5f970..000000000000
--- a/target/linux/generic/backport-6.1/790-68-v6.10-net-dsa-mt7530-explain-exposing-MDIO-bus-of-MT7531AE.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From c45832fe783f468aaaace09ae95a30cbf0acf724 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Mon, 22 Apr 2024 10:15:22 +0300
-Subject: [PATCH 15/15] net: dsa: mt7530: explain exposing MDIO bus of MT7531AE
- better
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on MT7531AE.
-Therefore, the GPIO 11-12 pins are set to function as MDC and MDIO to
-expose the MDIO bus of the switch. Replace the comment with a better
-explanation.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
----
- drivers/net/dsa/mt7530.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2640,7 +2640,10 @@ mt7531_setup(struct dsa_switch *ds)
- 	if (!priv->p5_sgmii) {
- 		mt7531_pll_setup(priv);
- 	} else {
--		/* Let ds->slave_mii_bus be able to access external phy. */
-+		/* Unlike MT7531BE, the GPIO 6-12 pins are not used for RGMII on
-+		 * MT7531AE. Set the GPIO 11-12 pins to function as MDC and MDIO
-+		 * to expose the MDIO bus of the switch.
-+		 */
- 		mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
- 			   MT7531_EXT_P_MDC_11);
- 		mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
diff --git a/target/linux/generic/backport-6.1/790-69-v6.10-net-dsa-mt7530-do-not-set-MT7530_P5_DIS-when-PHY-.patch b/target/linux/generic/backport-6.1/790-69-v6.10-net-dsa-mt7530-do-not-set-MT7530_P5_DIS-when-PHY-.patch
deleted file mode 100644
index 29079e03c599..000000000000
--- a/target/linux/generic/backport-6.1/790-69-v6.10-net-dsa-mt7530-do-not-set-MT7530_P5_DIS-when-PHY-.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 16e6592cd5c5bd74d8890973489f60176c692614 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Sun, 28 Apr 2024 12:19:58 +0300
-Subject: [PATCH] net: dsa: mt7530: do not set MT7530_P5_DIS when PHY muxing is
- being used
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-DSA initalises the ds->num_ports amount of ports in
-dsa_switch_touch_ports(). When the PHY muxing feature is in use, port 5
-won't be defined in the device tree. Because of this, the type member of
-the dsa_port structure for this port will be assigned DSA_PORT_TYPE_UNUSED.
-The dsa_port_setup() function calls ds->ops->port_disable() when the port
-type is DSA_PORT_TYPE_UNUSED.
-
-The MT7530_P5_DIS bit is unset in mt7530_setup() when PHY muxing is being
-used. mt7530_port_disable() which is assigned to ds->ops->port_disable() is
-called afterwards. Currently, mt7530_port_disable() sets MT7530_P5_DIS
-which breaks network connectivity when PHY muxing is being used.
-
-Therefore, do not set MT7530_P5_DIS when PHY muxing is being used.
-
-Fixes: 377174c5760c ("net: dsa: mt7530: move MT753X_MTRAP operations for MT7530")
-Reported-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240428-for-netnext-mt7530-do-not-disable-port5-when-phy-muxing-v2-1-bb7c37d293f8@arinc9.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -1227,7 +1227,8 @@ mt7530_port_disable(struct dsa_switch *d
- 	if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
- 		return;
- 
--	if (port == 5)
-+	/* Do not set MT7530_P5_DIS when port 5 is being used for PHY muxing. */
-+	if (port == 5 && priv->p5_mode == GMAC5)
- 		mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
- 	else if (port == 6)
- 		mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);
diff --git a/target/linux/generic/backport-6.1/790-70-v6.10-796-net-dsa-mt7530-detect-PHY-muxing-when-PHY-is-defined.patch b/target/linux/generic/backport-6.1/790-70-v6.10-796-net-dsa-mt7530-detect-PHY-muxing-when-PHY-is-defined.patch
deleted file mode 100644
index 69bbb8e22924..000000000000
--- a/target/linux/generic/backport-6.1/790-70-v6.10-796-net-dsa-mt7530-detect-PHY-muxing-when-PHY-is-defined.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From d8dcf5bd6d0eace9f7c1daa14b63b3925b09d033 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Tue, 30 Apr 2024 08:01:33 +0300
-Subject: [PATCH] net: dsa: mt7530: detect PHY muxing when PHY is defined on
- switch MDIO bus
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently, the MT7530 DSA subdriver configures the MT7530 switch to provide
-direct access to switch PHYs, meaning, the switch PHYs listen on the MDIO
-bus the switch listens on. The PHY muxing feature makes use of this.
-
-This is problematic as the PHY may be attached before the switch is
-initialised, in which case, the PHY will fail to be attached.
-
-Since commit 91374ba537bd ("net: dsa: mt7530: support OF-based registration
-of switch MDIO bus"), we can describe the switch PHYs on the MDIO bus of
-the switch on the device tree. Extend the check to detect PHY muxing when
-the PHY is defined on the MDIO bus of the switch on the device tree.
-
-When the PHY is described this way, the switch will be initialised first,
-then the switch MDIO bus will be registered. Only after these steps, the
-PHY will be attached.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Reviewed-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20240430-b4-for-netnext-mt7530-use-switch-mdio-bus-for-phy-muxing-v2-1-9104d886d0db@arinc9.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/dsa/mt7530.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -2489,7 +2489,8 @@ mt7530_setup(struct dsa_switch *ds)
- 			if (!phy_node)
- 				continue;
- 
--			if (phy_node->parent == priv->dev->of_node->parent) {
-+			if (phy_node->parent == priv->dev->of_node->parent ||
-+			    phy_node->parent->parent == priv->dev->of_node) {
- 				ret = of_get_phy_mode(mac_np, &interface);
- 				if (ret && ret != -ENODEV) {
- 					of_node_put(mac_np);
diff --git a/target/linux/generic/backport-6.1/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch b/target/linux/generic/backport-6.1/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch
deleted file mode 100644
index 3cf98acc8580..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.2-01-net-phy-Add-driver-for-Motorcomm-yt8521-gigabit-ethernet.patch
+++ /dev/null
@@ -1,1724 +0,0 @@
-From 70479a40954cf353e87a486997a3477108c75aa9 Mon Sep 17 00:00:00 2001
-From: Frank <Frank.Sae@motor-comm.com>
-Date: Fri, 28 Oct 2022 17:26:21 +0800
-Subject: [PATCH] net: phy: Add driver for Motorcomm yt8521 gigabit ethernet
- phy
-
-Add a driver for the motorcomm yt8521 gigabit ethernet phy. We have verified
- the driver on StarFive VisionFive development board, which is developed by
- Shanghai StarFive Technology Co., Ltd.. On the board, yt8521 gigabit ethernet
- phy works in utp mode, RGMII interface, supports 1000M/100M/10M speeds, and
- wol(magic package).
-
-Signed-off-by: Frank <Frank.Sae@motor-comm.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS                 |    1 +
- drivers/net/phy/Kconfig     |    2 +-
- drivers/net/phy/motorcomm.c | 1635 ++++++++++++++++++++++++++++++++++-
- 3 files changed, 1635 insertions(+), 3 deletions(-)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -13971,6 +13971,7 @@ F:	include/uapi/linux/meye.h
- 
- MOTORCOMM PHY DRIVER
- M:	Peter Geis <pgwipeout@gmail.com>
-+M:	Frank <Frank.Sae@motor-comm.com>
- L:	netdev@vger.kernel.org
- S:	Maintained
- F:	drivers/net/phy/motorcomm.c
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -257,7 +257,7 @@ config MOTORCOMM_PHY
- 	tristate "Motorcomm PHYs"
- 	help
- 	  Enables support for Motorcomm network PHYs.
--	  Currently supports the YT8511 gigabit PHY.
-+	  Currently supports the YT8511, YT8521 Gigabit Ethernet PHYs.
- 
- config NATIONAL_PHY
- 	tristate "National Semiconductor PHYs"
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -1,15 +1,106 @@
- // SPDX-License-Identifier: GPL-2.0+
- /*
-- * Driver for Motorcomm PHYs
-+ * Motorcomm 8511/8521 PHY driver.
-  *
-  * Author: Peter Geis <pgwipeout@gmail.com>
-+ * Author: Frank <Frank.Sae@motor-comm.com>
-  */
- 
-+#include <linux/etherdevice.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/phy.h>
- 
- #define PHY_ID_YT8511		0x0000010a
-+#define PHY_ID_YT8521				0x0000011A
-+
-+/* YT8521 Register Overview
-+ *	UTP Register space	|	FIBER Register space
-+ *  ------------------------------------------------------------
-+ * |	UTP MII			|	FIBER MII		|
-+ * |	UTP MMD			|				|
-+ * |	UTP Extended		|	FIBER Extended		|
-+ *  ------------------------------------------------------------
-+ * |			Common Extended				|
-+ *  ------------------------------------------------------------
-+ */
-+
-+/* 0x10 ~ 0x15 , 0x1E and 0x1F are common MII registers of yt phy */
-+
-+/* Specific Function Control Register */
-+#define YTPHY_SPECIFIC_FUNCTION_CONTROL_REG	0x10
-+
-+/* 2b00 Manual MDI configuration
-+ * 2b01 Manual MDIX configuration
-+ * 2b10 Reserved
-+ * 2b11 Enable automatic crossover for all modes  *default*
-+ */
-+#define YTPHY_SFCR_MDI_CROSSOVER_MODE_MASK	(BIT(6) | BIT(5))
-+#define YTPHY_SFCR_CROSSOVER_EN			BIT(3)
-+#define YTPHY_SFCR_SQE_TEST_EN			BIT(2)
-+#define YTPHY_SFCR_POLARITY_REVERSAL_EN		BIT(1)
-+#define YTPHY_SFCR_JABBER_DIS			BIT(0)
-+
-+/* Specific Status Register */
-+#define YTPHY_SPECIFIC_STATUS_REG		0x11
-+#define YTPHY_SSR_SPEED_MODE_OFFSET		14
-+
-+#define YTPHY_SSR_SPEED_MODE_MASK		(BIT(15) | BIT(14))
-+#define YTPHY_SSR_SPEED_10M			0x0
-+#define YTPHY_SSR_SPEED_100M			0x1
-+#define YTPHY_SSR_SPEED_1000M			0x2
-+#define YTPHY_SSR_DUPLEX_OFFSET			13
-+#define YTPHY_SSR_DUPLEX			BIT(13)
-+#define YTPHY_SSR_PAGE_RECEIVED			BIT(12)
-+#define YTPHY_SSR_SPEED_DUPLEX_RESOLVED		BIT(11)
-+#define YTPHY_SSR_LINK				BIT(10)
-+#define YTPHY_SSR_MDIX_CROSSOVER		BIT(6)
-+#define YTPHY_SSR_DOWNGRADE			BIT(5)
-+#define YTPHY_SSR_TRANSMIT_PAUSE		BIT(3)
-+#define YTPHY_SSR_RECEIVE_PAUSE			BIT(2)
-+#define YTPHY_SSR_POLARITY			BIT(1)
-+#define YTPHY_SSR_JABBER			BIT(0)
-+
-+/* Interrupt enable Register */
-+#define YTPHY_INTERRUPT_ENABLE_REG		0x12
-+#define YTPHY_IER_WOL				BIT(6)
-+
-+/* Interrupt Status Register */
-+#define YTPHY_INTERRUPT_STATUS_REG		0x13
-+#define YTPHY_ISR_AUTONEG_ERR			BIT(15)
-+#define YTPHY_ISR_SPEED_CHANGED			BIT(14)
-+#define YTPHY_ISR_DUPLEX_CHANGED		BIT(13)
-+#define YTPHY_ISR_PAGE_RECEIVED			BIT(12)
-+#define YTPHY_ISR_LINK_FAILED			BIT(11)
-+#define YTPHY_ISR_LINK_SUCCESSED		BIT(10)
-+#define YTPHY_ISR_WOL				BIT(6)
-+#define YTPHY_ISR_WIRESPEED_DOWNGRADE		BIT(5)
-+#define YTPHY_ISR_SERDES_LINK_FAILED		BIT(3)
-+#define YTPHY_ISR_SERDES_LINK_SUCCESSED		BIT(2)
-+#define YTPHY_ISR_POLARITY_CHANGED		BIT(1)
-+#define YTPHY_ISR_JABBER_HAPPENED		BIT(0)
-+
-+/* Speed Auto Downgrade Control Register */
-+#define YTPHY_SPEED_AUTO_DOWNGRADE_CONTROL_REG	0x14
-+#define YTPHY_SADCR_SPEED_DOWNGRADE_EN		BIT(5)
-+
-+/* If these bits are set to 3, the PHY attempts five times ( 3(set value) +
-+ * additional 2) before downgrading, default 0x3
-+ */
-+#define YTPHY_SADCR_SPEED_RETRY_LIMIT		(0x3 << 2)
-+
-+/* Rx Error Counter Register */
-+#define YTPHY_RX_ERROR_COUNTER_REG		0x15
-+
-+/* Extended Register's Address Offset Register */
-+#define YTPHY_PAGE_SELECT			0x1E
-+
-+/* Extended Register's Data Register */
-+#define YTPHY_PAGE_DATA				0x1F
-+
-+/* FIBER Auto-Negotiation link partner ability */
-+#define YTPHY_FLPA_PAUSE			(0x3 << 7)
-+#define YTPHY_FLPA_ASYM_PAUSE			(0x2 << 7)
- 
- #define YT8511_PAGE_SELECT	0x1e
- #define YT8511_PAGE		0x1f
-@@ -38,6 +129,352 @@
- #define YT8511_DELAY_FE_TX_EN	(0xf << 12)
- #define YT8511_DELAY_FE_TX_DIS	(0x2 << 12)
- 
-+/* Extended register is different from MMD Register and MII Register.
-+ * We can use ytphy_read_ext/ytphy_write_ext/ytphy_modify_ext function to
-+ * operate extended register.
-+ * Extended Register  start
-+ */
-+
-+/* Phy gmii clock gating Register */
-+#define YT8521_CLOCK_GATING_REG			0xC
-+#define YT8521_CGR_RX_CLK_EN			BIT(12)
-+
-+#define YT8521_EXTREG_SLEEP_CONTROL1_REG	0x27
-+#define YT8521_ESC1R_SLEEP_SW			BIT(15)
-+#define YT8521_ESC1R_PLLON_SLP			BIT(14)
-+
-+/* Phy fiber Link timer cfg2 Register */
-+#define YT8521_LINK_TIMER_CFG2_REG		0xA5
-+#define YT8521_LTCR_EN_AUTOSEN			BIT(15)
-+
-+/* 0xA000, 0xA001, 0xA003 ,and 0xA006 ~ 0xA00A  are common ext registers
-+ * of yt8521 phy. There is no need to switch reg space when operating these
-+ * registers.
-+ */
-+
-+#define YT8521_REG_SPACE_SELECT_REG		0xA000
-+#define YT8521_RSSR_SPACE_MASK			BIT(1)
-+#define YT8521_RSSR_FIBER_SPACE			(0x1 << 1)
-+#define YT8521_RSSR_UTP_SPACE			(0x0 << 1)
-+#define YT8521_RSSR_TO_BE_ARBITRATED		(0xFF)
-+
-+#define YT8521_CHIP_CONFIG_REG			0xA001
-+#define YT8521_CCR_SW_RST			BIT(15)
-+
-+#define YT8521_CCR_MODE_SEL_MASK		(BIT(2) | BIT(1) | BIT(0))
-+#define YT8521_CCR_MODE_UTP_TO_RGMII		0
-+#define YT8521_CCR_MODE_FIBER_TO_RGMII		1
-+#define YT8521_CCR_MODE_UTP_FIBER_TO_RGMII	2
-+#define YT8521_CCR_MODE_UTP_TO_SGMII		3
-+#define YT8521_CCR_MODE_SGPHY_TO_RGMAC		4
-+#define YT8521_CCR_MODE_SGMAC_TO_RGPHY		5
-+#define YT8521_CCR_MODE_UTP_TO_FIBER_AUTO	6
-+#define YT8521_CCR_MODE_UTP_TO_FIBER_FORCE	7
-+
-+/* 3 phy polling modes,poll mode combines utp and fiber mode*/
-+#define YT8521_MODE_FIBER			0x1
-+#define YT8521_MODE_UTP				0x2
-+#define YT8521_MODE_POLL			0x3
-+
-+#define YT8521_RGMII_CONFIG1_REG		0xA003
-+
-+/* TX Gig-E Delay is bits 3:0, default 0x1
-+ * TX Fast-E Delay is bits 7:4, default 0xf
-+ * RX Delay is bits 13:10, default 0x0
-+ * Delay = 150ps * N
-+ * On = 2250ps, off = 0ps
-+ */
-+#define YT8521_RC1R_RX_DELAY_MASK		(0xF << 10)
-+#define YT8521_RC1R_RX_DELAY_EN			(0xF << 10)
-+#define YT8521_RC1R_RX_DELAY_DIS		(0x0 << 10)
-+#define YT8521_RC1R_FE_TX_DELAY_MASK		(0xF << 4)
-+#define YT8521_RC1R_FE_TX_DELAY_EN		(0xF << 4)
-+#define YT8521_RC1R_FE_TX_DELAY_DIS		(0x0 << 4)
-+#define YT8521_RC1R_GE_TX_DELAY_MASK		(0xF << 0)
-+#define YT8521_RC1R_GE_TX_DELAY_EN		(0xF << 0)
-+#define YT8521_RC1R_GE_TX_DELAY_DIS		(0x0 << 0)
-+
-+#define YTPHY_MISC_CONFIG_REG			0xA006
-+#define YTPHY_MCR_FIBER_SPEED_MASK		BIT(0)
-+#define YTPHY_MCR_FIBER_1000BX			(0x1 << 0)
-+#define YTPHY_MCR_FIBER_100FX			(0x0 << 0)
-+
-+/* WOL MAC ADDR: MACADDR2(highest), MACADDR1(middle), MACADDR0(lowest) */
-+#define YTPHY_WOL_MACADDR2_REG			0xA007
-+#define YTPHY_WOL_MACADDR1_REG			0xA008
-+#define YTPHY_WOL_MACADDR0_REG			0xA009
-+
-+#define YTPHY_WOL_CONFIG_REG			0xA00A
-+#define YTPHY_WCR_INTR_SEL			BIT(6)
-+#define YTPHY_WCR_ENABLE			BIT(3)
-+
-+/* 2b00 84ms
-+ * 2b01 168ms  *default*
-+ * 2b10 336ms
-+ * 2b11 672ms
-+ */
-+#define YTPHY_WCR_PULSE_WIDTH_MASK		(BIT(2) | BIT(1))
-+#define YTPHY_WCR_PULSE_WIDTH_672MS		(BIT(2) | BIT(1))
-+
-+/* 1b0 Interrupt and WOL events is level triggered and active LOW  *default*
-+ * 1b1 Interrupt and WOL events is pulse triggered and active LOW
-+ */
-+#define YTPHY_WCR_TYPE_PULSE			BIT(0)
-+
-+/* Extended Register  end */
-+
-+struct yt8521_priv {
-+	/* combo_advertising is used for case of YT8521 in combo mode,
-+	 * this means that yt8521 may work in utp or fiber mode which depends
-+	 * on which media is connected (YT8521_RSSR_TO_BE_ARBITRATED).
-+	 */
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(combo_advertising);
-+
-+	/* YT8521_MODE_FIBER / YT8521_MODE_UTP / YT8521_MODE_POLL*/
-+	u8 polling_mode;
-+	u8 strap_mode; /* 8 working modes  */
-+	/* current reg page of yt8521 phy:
-+	 * YT8521_RSSR_UTP_SPACE
-+	 * YT8521_RSSR_FIBER_SPACE
-+	 * YT8521_RSSR_TO_BE_ARBITRATED
-+	 */
-+	u8 reg_page;
-+};
-+
-+/**
-+ * ytphy_read_ext() - read a PHY's extended register
-+ * @phydev: a pointer to a &struct phy_device
-+ * @regnum: register number to read
-+ *
-+ * NOTE:The caller must have taken the MDIO bus lock.
-+ *
-+ * returns the value of regnum reg or negative error code
-+ */
-+static int ytphy_read_ext(struct phy_device *phydev, u16 regnum)
-+{
-+	int ret;
-+
-+	ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum);
-+	if (ret < 0)
-+		return ret;
-+
-+	return __phy_read(phydev, YTPHY_PAGE_DATA);
-+}
-+
-+/**
-+ * ytphy_read_ext_with_lock() - read a PHY's extended register
-+ * @phydev: a pointer to a &struct phy_device
-+ * @regnum: register number to read
-+ *
-+ * returns the value of regnum reg or negative error code
-+ */
-+static int ytphy_read_ext_with_lock(struct phy_device *phydev, u16 regnum)
-+{
-+	int ret;
-+
-+	phy_lock_mdio_bus(phydev);
-+	ret = ytphy_read_ext(phydev, regnum);
-+	phy_unlock_mdio_bus(phydev);
-+
-+	return ret;
-+}
-+
-+/**
-+ * ytphy_write_ext() - write a PHY's extended register
-+ * @phydev: a pointer to a &struct phy_device
-+ * @regnum: register number to write
-+ * @val: value to write to @regnum
-+ *
-+ * NOTE:The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative error code
-+ */
-+static int ytphy_write_ext(struct phy_device *phydev, u16 regnum, u16 val)
-+{
-+	int ret;
-+
-+	ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum);
-+	if (ret < 0)
-+		return ret;
-+
-+	return __phy_write(phydev, YTPHY_PAGE_DATA, val);
-+}
-+
-+/**
-+ * ytphy_write_ext_with_lock() - write a PHY's extended register
-+ * @phydev: a pointer to a &struct phy_device
-+ * @regnum: register number to write
-+ * @val: value to write to @regnum
-+ *
-+ * returns 0 or negative error code
-+ */
-+static int ytphy_write_ext_with_lock(struct phy_device *phydev, u16 regnum,
-+				     u16 val)
-+{
-+	int ret;
-+
-+	phy_lock_mdio_bus(phydev);
-+	ret = ytphy_write_ext(phydev, regnum, val);
-+	phy_unlock_mdio_bus(phydev);
-+
-+	return ret;
-+}
-+
-+/**
-+ * ytphy_modify_ext() - bits modify a PHY's extended register
-+ * @phydev: a pointer to a &struct phy_device
-+ * @regnum: register number to write
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ *
-+ * NOTE: Convenience function which allows a PHY's extended register to be
-+ * modified as new register value = (old register value & ~mask) | set.
-+ * The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative error code
-+ */
-+static int ytphy_modify_ext(struct phy_device *phydev, u16 regnum, u16 mask,
-+			    u16 set)
-+{
-+	int ret;
-+
-+	ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum);
-+	if (ret < 0)
-+		return ret;
-+
-+	return __phy_modify(phydev, YTPHY_PAGE_DATA, mask, set);
-+}
-+
-+/**
-+ * ytphy_modify_ext_with_lock() - bits modify a PHY's extended register
-+ * @phydev: a pointer to a &struct phy_device
-+ * @regnum: register number to write
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ *
-+ * NOTE: Convenience function which allows a PHY's extended register to be
-+ * modified as new register value = (old register value & ~mask) | set.
-+ *
-+ * returns 0 or negative error code
-+ */
-+static int ytphy_modify_ext_with_lock(struct phy_device *phydev, u16 regnum,
-+				      u16 mask, u16 set)
-+{
-+	int ret;
-+
-+	phy_lock_mdio_bus(phydev);
-+	ret = ytphy_modify_ext(phydev, regnum, mask, set);
-+	phy_unlock_mdio_bus(phydev);
-+
-+	return ret;
-+}
-+
-+/**
-+ * ytphy_get_wol() - report whether wake-on-lan is enabled
-+ * @phydev: a pointer to a &struct phy_device
-+ * @wol: a pointer to a &struct ethtool_wolinfo
-+ *
-+ * NOTE: YTPHY_WOL_CONFIG_REG is common ext reg.
-+ */
-+static void ytphy_get_wol(struct phy_device *phydev,
-+			  struct ethtool_wolinfo *wol)
-+{
-+	int wol_config;
-+
-+	wol->supported = WAKE_MAGIC;
-+	wol->wolopts = 0;
-+
-+	wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG);
-+	if (wol_config < 0)
-+		return;
-+
-+	if (wol_config & YTPHY_WCR_ENABLE)
-+		wol->wolopts |= WAKE_MAGIC;
-+}
-+
-+/**
-+ * ytphy_set_wol() - turn wake-on-lan on or off
-+ * @phydev: a pointer to a &struct phy_device
-+ * @wol: a pointer to a &struct ethtool_wolinfo
-+ *
-+ * NOTE: YTPHY_WOL_CONFIG_REG, YTPHY_WOL_MACADDR2_REG, YTPHY_WOL_MACADDR1_REG
-+ * and YTPHY_WOL_MACADDR0_REG are common ext reg. The
-+ * YTPHY_INTERRUPT_ENABLE_REG of UTP is special, fiber also use this register.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int ytphy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
-+{
-+	struct net_device *p_attached_dev;
-+	const u16 mac_addr_reg[] = {
-+		YTPHY_WOL_MACADDR2_REG,
-+		YTPHY_WOL_MACADDR1_REG,
-+		YTPHY_WOL_MACADDR0_REG,
-+	};
-+	const u8 *mac_addr;
-+	int old_page;
-+	int ret = 0;
-+	u16 mask;
-+	u16 val;
-+	u8 i;
-+
-+	if (wol->wolopts & WAKE_MAGIC) {
-+		p_attached_dev = phydev->attached_dev;
-+		if (!p_attached_dev)
-+			return -ENODEV;
-+
-+		mac_addr = (const u8 *)p_attached_dev->dev_addr;
-+		if (!is_valid_ether_addr(mac_addr))
-+			return -EINVAL;
-+
-+		/* lock mdio bus then switch to utp reg space */
-+		old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
-+		if (old_page < 0)
-+			goto err_restore_page;
-+
-+		/* Store the device address for the magic packet */
-+		for (i = 0; i < 3; i++) {
-+			ret = ytphy_write_ext(phydev, mac_addr_reg[i],
-+					      ((mac_addr[i * 2] << 8)) |
-+						      (mac_addr[i * 2 + 1]));
-+			if (ret < 0)
-+				goto err_restore_page;
-+		}
-+
-+		/* Enable WOL feature */
-+		mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL;
-+		val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
-+		val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS;
-+		ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, val);
-+		if (ret < 0)
-+			goto err_restore_page;
-+
-+		/* Enable WOL interrupt */
-+		ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0,
-+				   YTPHY_IER_WOL);
-+		if (ret < 0)
-+			goto err_restore_page;
-+
-+	} else {
-+		old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
-+		if (old_page < 0)
-+			goto err_restore_page;
-+
-+		/* Disable WOL feature */
-+		mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
-+		ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, 0);
-+
-+		/* Disable WOL interrupt */
-+		ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG,
-+				   YTPHY_IER_WOL, 0);
-+		if (ret < 0)
-+			goto err_restore_page;
-+	}
-+
-+err_restore_page:
-+	return phy_restore_page(phydev, old_page, ret);
-+}
-+
- static int yt8511_read_page(struct phy_device *phydev)
- {
- 	return __phy_read(phydev, YT8511_PAGE_SELECT);
-@@ -111,6 +548,1181 @@ err_restore_page:
- 	return phy_restore_page(phydev, oldpage, ret);
- }
- 
-+/**
-+ * yt8521_read_page() - read reg page
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns current reg space of yt8521 (YT8521_RSSR_FIBER_SPACE/
-+ * YT8521_RSSR_UTP_SPACE) or negative errno code
-+ */
-+static int yt8521_read_page(struct phy_device *phydev)
-+{
-+	int old_page;
-+
-+	old_page = ytphy_read_ext(phydev, YT8521_REG_SPACE_SELECT_REG);
-+	if (old_page < 0)
-+		return old_page;
-+
-+	if ((old_page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE)
-+		return YT8521_RSSR_FIBER_SPACE;
-+
-+	return YT8521_RSSR_UTP_SPACE;
-+};
-+
-+/**
-+ * yt8521_write_page() - write reg page
-+ * @phydev: a pointer to a &struct phy_device
-+ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to write.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_write_page(struct phy_device *phydev, int page)
-+{
-+	int mask = YT8521_RSSR_SPACE_MASK;
-+	int set;
-+
-+	if ((page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE)
-+		set = YT8521_RSSR_FIBER_SPACE;
-+	else
-+		set = YT8521_RSSR_UTP_SPACE;
-+
-+	return ytphy_modify_ext(phydev, YT8521_REG_SPACE_SELECT_REG, mask, set);
-+};
-+
-+/**
-+ * yt8521_probe() - read chip config then set suitable polling_mode
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_probe(struct phy_device *phydev)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	struct yt8521_priv *priv;
-+	int chip_config;
-+	int ret;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	phydev->priv = priv;
-+
-+	chip_config = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG);
-+	if (chip_config < 0)
-+		return chip_config;
-+
-+	priv->strap_mode = chip_config & YT8521_CCR_MODE_SEL_MASK;
-+	switch (priv->strap_mode) {
-+	case YT8521_CCR_MODE_FIBER_TO_RGMII:
-+	case YT8521_CCR_MODE_SGPHY_TO_RGMAC:
-+	case YT8521_CCR_MODE_SGMAC_TO_RGPHY:
-+		priv->polling_mode = YT8521_MODE_FIBER;
-+		priv->reg_page = YT8521_RSSR_FIBER_SPACE;
-+		phydev->port = PORT_FIBRE;
-+		break;
-+	case YT8521_CCR_MODE_UTP_FIBER_TO_RGMII:
-+	case YT8521_CCR_MODE_UTP_TO_FIBER_AUTO:
-+	case YT8521_CCR_MODE_UTP_TO_FIBER_FORCE:
-+		priv->polling_mode = YT8521_MODE_POLL;
-+		priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED;
-+		phydev->port = PORT_NONE;
-+		break;
-+	case YT8521_CCR_MODE_UTP_TO_SGMII:
-+	case YT8521_CCR_MODE_UTP_TO_RGMII:
-+		priv->polling_mode = YT8521_MODE_UTP;
-+		priv->reg_page = YT8521_RSSR_UTP_SPACE;
-+		phydev->port = PORT_TP;
-+		break;
-+	}
-+	/* set default reg space */
-+	if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
-+		ret = ytphy_write_ext_with_lock(phydev,
-+						YT8521_REG_SPACE_SELECT_REG,
-+						priv->reg_page);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * NOTE:The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int ytphy_utp_read_lpa(struct phy_device *phydev)
-+{
-+	int lpa, lpagb;
-+
-+	if (phydev->autoneg == AUTONEG_ENABLE) {
-+		if (!phydev->autoneg_complete) {
-+			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
-+							0);
-+			mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
-+			return 0;
-+		}
-+
-+		if (phydev->is_gigabit_capable) {
-+			lpagb = __phy_read(phydev, MII_STAT1000);
-+			if (lpagb < 0)
-+				return lpagb;
-+
-+			if (lpagb & LPA_1000MSFAIL) {
-+				int adv = __phy_read(phydev, MII_CTRL1000);
-+
-+				if (adv < 0)
-+					return adv;
-+
-+				if (adv & CTL1000_ENABLE_MASTER)
-+					phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n");
-+				else
-+					phydev_err(phydev, "Master/Slave resolution failed\n");
-+				return -ENOLINK;
-+			}
-+
-+			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
-+							lpagb);
-+		}
-+
-+		lpa = __phy_read(phydev, MII_LPA);
-+		if (lpa < 0)
-+			return lpa;
-+
-+		mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
-+	} else {
-+		linkmode_zero(phydev->lp_advertising);
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ * yt8521_adjust_status() - update speed and duplex to phydev. when in fiber
-+ * mode, adjust speed and duplex.
-+ * @phydev: a pointer to a &struct phy_device
-+ * @status: yt8521 status read from YTPHY_SPECIFIC_STATUS_REG
-+ * @is_utp: false(yt8521 work in fiber mode) or true(yt8521 work in utp mode)
-+ *
-+ * NOTE:The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0
-+ */
-+static int yt8521_adjust_status(struct phy_device *phydev, int status,
-+				bool is_utp)
-+{
-+	int speed_mode, duplex;
-+	int speed;
-+	int err;
-+	int lpa;
-+
-+	if (is_utp)
-+		duplex = (status & YTPHY_SSR_DUPLEX) >> YTPHY_SSR_DUPLEX_OFFSET;
-+	else
-+		duplex = DUPLEX_FULL;	/* for fiber, it always DUPLEX_FULL */
-+
-+	speed_mode = (status & YTPHY_SSR_SPEED_MODE_MASK) >>
-+		     YTPHY_SSR_SPEED_MODE_OFFSET;
-+
-+	switch (speed_mode) {
-+	case YTPHY_SSR_SPEED_10M:
-+		if (is_utp)
-+			speed = SPEED_10;
-+		else
-+			/* for fiber, it will never run here, default to
-+			 * SPEED_UNKNOWN
-+			 */
-+			speed = SPEED_UNKNOWN;
-+		break;
-+	case YTPHY_SSR_SPEED_100M:
-+		speed = SPEED_100;
-+		break;
-+	case YTPHY_SSR_SPEED_1000M:
-+		speed = SPEED_1000;
-+		break;
-+	default:
-+		speed = SPEED_UNKNOWN;
-+		break;
-+	}
-+
-+	phydev->speed = speed;
-+	phydev->duplex = duplex;
-+
-+	if (is_utp) {
-+		err = ytphy_utp_read_lpa(phydev);
-+		if (err < 0)
-+			return err;
-+
-+		phy_resolve_aneg_pause(phydev);
-+	} else {
-+		lpa = __phy_read(phydev, MII_LPA);
-+		if (lpa < 0)
-+			return lpa;
-+
-+		/* only support 1000baseX Full */
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-+				 phydev->lp_advertising, lpa & LPA_1000XFULL);
-+
-+		if (!(lpa & YTPHY_FLPA_PAUSE)) {
-+			phydev->pause = 0;
-+			phydev->asym_pause = 0;
-+		} else if ((lpa & YTPHY_FLPA_ASYM_PAUSE)) {
-+			phydev->pause = 1;
-+			phydev->asym_pause = 1;
-+		} else {
-+			phydev->pause = 1;
-+			phydev->asym_pause = 0;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ * yt8521_read_status_paged() -  determines the speed and duplex of one page
-+ * @phydev: a pointer to a &struct phy_device
-+ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to
-+ * operate.
-+ *
-+ * returns 1 (utp or fiber link),0 (no link) or negative errno code
-+ */
-+static int yt8521_read_status_paged(struct phy_device *phydev, int page)
-+{
-+	int fiber_latch_val;
-+	int fiber_curr_val;
-+	int old_page;
-+	int ret = 0;
-+	int status;
-+	int link;
-+
-+	linkmode_zero(phydev->lp_advertising);
-+	phydev->duplex = DUPLEX_UNKNOWN;
-+	phydev->speed = SPEED_UNKNOWN;
-+	phydev->asym_pause = 0;
-+	phydev->pause = 0;
-+
-+	/* YT8521 has two reg space (utp/fiber) for linkup with utp/fiber
-+	 * respectively. but for utp/fiber combo mode, reg space should be
-+	 * arbitrated based on media priority. by default, utp takes
-+	 * priority. reg space should be properly set before read
-+	 * YTPHY_SPECIFIC_STATUS_REG.
-+	 */
-+
-+	page &= YT8521_RSSR_SPACE_MASK;
-+	old_page = phy_select_page(phydev, page);
-+	if (old_page < 0)
-+		goto err_restore_page;
-+
-+	/* Read YTPHY_SPECIFIC_STATUS_REG, which indicates the speed and duplex
-+	 * of the PHY is actually using.
-+	 */
-+	ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG);
-+	if (ret < 0)
-+		goto err_restore_page;
-+
-+	status = ret;
-+	link = !!(status & YTPHY_SSR_LINK);
-+
-+	/* When PHY is in fiber mode, speed transferred from 1000Mbps to
-+	 * 100Mbps,there is not link down from YTPHY_SPECIFIC_STATUS_REG, so
-+	 * we need check MII_BMSR to identify such case.
-+	 */
-+	if (page == YT8521_RSSR_FIBER_SPACE) {
-+		ret = __phy_read(phydev, MII_BMSR);
-+		if (ret < 0)
-+			goto err_restore_page;
-+
-+		fiber_latch_val = ret;
-+		ret = __phy_read(phydev, MII_BMSR);
-+		if (ret < 0)
-+			goto err_restore_page;
-+
-+		fiber_curr_val = ret;
-+		if (link && fiber_latch_val != fiber_curr_val) {
-+			link = 0;
-+			phydev_info(phydev,
-+				    "%s, fiber link down detect, latch = %04x, curr = %04x\n",
-+				    __func__, fiber_latch_val, fiber_curr_val);
-+		}
-+	} else {
-+		/* Read autonegotiation status */
-+		ret = __phy_read(phydev, MII_BMSR);
-+		if (ret < 0)
-+			goto err_restore_page;
-+
-+		phydev->autoneg_complete = ret & BMSR_ANEGCOMPLETE ? 1 : 0;
-+	}
-+
-+	if (link) {
-+		if (page == YT8521_RSSR_UTP_SPACE)
-+			yt8521_adjust_status(phydev, status, true);
-+		else
-+			yt8521_adjust_status(phydev, status, false);
-+	}
-+	return phy_restore_page(phydev, old_page, link);
-+
-+err_restore_page:
-+	return phy_restore_page(phydev, old_page, ret);
-+}
-+
-+/**
-+ * yt8521_read_status() -  determines the negotiated speed and duplex
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_read_status(struct phy_device *phydev)
-+{
-+	struct yt8521_priv *priv = phydev->priv;
-+	int link_fiber = 0;
-+	int link_utp;
-+	int link;
-+	int ret;
-+
-+	if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
-+		link = yt8521_read_status_paged(phydev, priv->reg_page);
-+		if (link < 0)
-+			return link;
-+	} else {
-+		/* when page is YT8521_RSSR_TO_BE_ARBITRATED, arbitration is
-+		 * needed. by default, utp is higher priority.
-+		 */
-+
-+		link_utp = yt8521_read_status_paged(phydev,
-+						    YT8521_RSSR_UTP_SPACE);
-+		if (link_utp < 0)
-+			return link_utp;
-+
-+		if (!link_utp) {
-+			link_fiber = yt8521_read_status_paged(phydev,
-+							      YT8521_RSSR_FIBER_SPACE);
-+			if (link_fiber < 0)
-+				return link_fiber;
-+		}
-+
-+		link = link_utp || link_fiber;
-+	}
-+
-+	if (link) {
-+		if (phydev->link == 0) {
-+			/* arbitrate reg space based on linkup media type. */
-+			if (priv->polling_mode == YT8521_MODE_POLL &&
-+			    priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) {
-+				if (link_fiber)
-+					priv->reg_page =
-+						YT8521_RSSR_FIBER_SPACE;
-+				else
-+					priv->reg_page = YT8521_RSSR_UTP_SPACE;
-+
-+				ret = ytphy_write_ext_with_lock(phydev,
-+								YT8521_REG_SPACE_SELECT_REG,
-+								priv->reg_page);
-+				if (ret < 0)
-+					return ret;
-+
-+				phydev->port = link_fiber ? PORT_FIBRE : PORT_TP;
-+
-+				phydev_info(phydev, "%s, link up, media: %s\n",
-+					    __func__,
-+					    (phydev->port == PORT_TP) ?
-+					    "UTP" : "Fiber");
-+			}
-+		}
-+		phydev->link = 1;
-+	} else {
-+		if (phydev->link == 1) {
-+			phydev_info(phydev, "%s, link down, media: %s\n",
-+				    __func__, (phydev->port == PORT_TP) ?
-+				    "UTP" : "Fiber");
-+
-+			/* When in YT8521_MODE_POLL mode, need prepare for next
-+			 * arbitration.
-+			 */
-+			if (priv->polling_mode == YT8521_MODE_POLL) {
-+				priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED;
-+				phydev->port = PORT_NONE;
-+			}
-+		}
-+
-+		phydev->link = 0;
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ * yt8521_modify_bmcr_paged - bits modify a PHY's BMCR register of one page
-+ * @phydev: the phy_device struct
-+ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to operate
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ *
-+ * NOTE: Convenience function which allows a PHY's BMCR register to be
-+ * modified as new register value = (old register value & ~mask) | set.
-+ * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space
-+ * has MII_BMCR. poll mode combines utp and faber,so need do both.
-+ * If it is reset, it will wait for completion.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_modify_bmcr_paged(struct phy_device *phydev, int page,
-+				    u16 mask, u16 set)
-+{
-+	int max_cnt = 500; /* the max wait time of reset ~ 500 ms */
-+	int old_page;
-+	int ret = 0;
-+
-+	old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK);
-+	if (old_page < 0)
-+		goto err_restore_page;
-+
-+	ret = __phy_modify(phydev, MII_BMCR, mask, set);
-+	if (ret < 0)
-+		goto err_restore_page;
-+
-+	/* If it is reset, need to wait for the reset to complete */
-+	if (set == BMCR_RESET) {
-+		while (max_cnt--) {
-+			usleep_range(1000, 1100);
-+			ret = __phy_read(phydev, MII_BMCR);
-+			if (ret < 0)
-+				goto err_restore_page;
-+
-+			if (!(ret & BMCR_RESET))
-+				return phy_restore_page(phydev, old_page, 0);
-+		}
-+	}
-+
-+err_restore_page:
-+	return phy_restore_page(phydev, old_page, ret);
-+}
-+
-+/**
-+ * yt8521_modify_utp_fiber_bmcr - bits modify a PHY's BMCR register
-+ * @phydev: the phy_device struct
-+ * @mask: bit mask of bits to clear
-+ * @set: bit mask of bits to set
-+ *
-+ * NOTE: Convenience function which allows a PHY's BMCR register to be
-+ * modified as new register value = (old register value & ~mask) | set.
-+ * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space
-+ * has MII_BMCR. poll mode combines utp and faber,so need do both.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_modify_utp_fiber_bmcr(struct phy_device *phydev, u16 mask,
-+					u16 set)
-+{
-+	struct yt8521_priv *priv = phydev->priv;
-+	int ret;
-+
-+	if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
-+		ret = yt8521_modify_bmcr_paged(phydev, priv->reg_page, mask,
-+					       set);
-+		if (ret < 0)
-+			return ret;
-+	} else {
-+		ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_UTP_SPACE,
-+					       mask, set);
-+		if (ret < 0)
-+			return ret;
-+
-+		ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_FIBER_SPACE,
-+					       mask, set);
-+		if (ret < 0)
-+			return ret;
-+	}
-+	return 0;
-+}
-+
-+/**
-+ * yt8521_soft_reset() - called to issue a PHY software reset
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_soft_reset(struct phy_device *phydev)
-+{
-+	return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_RESET);
-+}
-+
-+/**
-+ * yt8521_suspend() - suspend the hardware
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_suspend(struct phy_device *phydev)
-+{
-+	int wol_config;
-+
-+	/* YTPHY_WOL_CONFIG_REG is common ext reg */
-+	wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG);
-+	if (wol_config < 0)
-+		return wol_config;
-+
-+	/* if wol enable, do nothing */
-+	if (wol_config & YTPHY_WCR_ENABLE)
-+		return 0;
-+
-+	return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_PDOWN);
-+}
-+
-+/**
-+ * yt8521_resume() - resume the hardware
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_resume(struct phy_device *phydev)
-+{
-+	int ret;
-+	int wol_config;
-+
-+	/* disable auto sleep */
-+	ret = ytphy_modify_ext_with_lock(phydev,
-+					 YT8521_EXTREG_SLEEP_CONTROL1_REG,
-+					 YT8521_ESC1R_SLEEP_SW, 0);
-+	if (ret < 0)
-+		return ret;
-+
-+	wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG);
-+	if (wol_config < 0)
-+		return wol_config;
-+
-+	/* if wol enable, do nothing */
-+	if (wol_config & YTPHY_WCR_ENABLE)
-+		return 0;
-+
-+	return yt8521_modify_utp_fiber_bmcr(phydev, BMCR_PDOWN, 0);
-+}
-+
-+/**
-+ * yt8521_config_init() - called to initialize the PHY
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_config_init(struct phy_device *phydev)
-+{
-+	int old_page;
-+	int ret = 0;
-+	u16 val;
-+
-+	old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
-+	if (old_page < 0)
-+		goto err_restore_page;
-+
-+	switch (phydev->interface) {
-+	case PHY_INTERFACE_MODE_RGMII:
-+		val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS;
-+		val |= YT8521_RC1R_RX_DELAY_DIS;
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII_RXID:
-+		val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS;
-+		val |= YT8521_RC1R_RX_DELAY_EN;
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII_TXID:
-+		val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN;
-+		val |= YT8521_RC1R_RX_DELAY_DIS;
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII_ID:
-+		val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN;
-+		val |= YT8521_RC1R_RX_DELAY_EN;
-+		break;
-+	case PHY_INTERFACE_MODE_SGMII:
-+		break;
-+	default: /* do not support other modes */
-+		ret = -EOPNOTSUPP;
-+		goto err_restore_page;
-+	}
-+
-+	/* set rgmii delay mode */
-+	if (phydev->interface != PHY_INTERFACE_MODE_SGMII) {
-+		ret = ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG,
-+				       (YT8521_RC1R_RX_DELAY_MASK |
-+				       YT8521_RC1R_FE_TX_DELAY_MASK |
-+				       YT8521_RC1R_GE_TX_DELAY_MASK),
-+				       val);
-+		if (ret < 0)
-+			goto err_restore_page;
-+	}
-+
-+	/* disable auto sleep */
-+	ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG,
-+			       YT8521_ESC1R_SLEEP_SW, 0);
-+	if (ret < 0)
-+		goto err_restore_page;
-+
-+	/* enable RXC clock when no wire plug */
-+	ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG,
-+			       YT8521_CGR_RX_CLK_EN, 0);
-+	if (ret < 0)
-+		goto err_restore_page;
-+
-+err_restore_page:
-+	return phy_restore_page(phydev, old_page, ret);
-+}
-+
-+/**
-+ * yt8521_prepare_fiber_features() -  A small helper function that setup
-+ * fiber's features.
-+ * @phydev: a pointer to a &struct phy_device
-+ * @dst: a pointer to store fiber's features
-+ */
-+static void yt8521_prepare_fiber_features(struct phy_device *phydev,
-+					  unsigned long *dst)
-+{
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, dst);
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, dst);
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, dst);
-+	linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, dst);
-+}
-+
-+/**
-+ * yt8521_fiber_setup_forced - configures/forces speed from @phydev
-+ * @phydev: target phy_device struct
-+ *
-+ * NOTE:The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_fiber_setup_forced(struct phy_device *phydev)
-+{
-+	u16 val;
-+	int ret;
-+
-+	if (phydev->speed == SPEED_1000)
-+		val = YTPHY_MCR_FIBER_1000BX;
-+	else if (phydev->speed == SPEED_100)
-+		val = YTPHY_MCR_FIBER_100FX;
-+	else
-+		return -EINVAL;
-+
-+	ret =  __phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* disable Fiber auto sensing */
-+	ret =  ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG,
-+				YT8521_LTCR_EN_AUTOSEN, 0);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret =  ytphy_modify_ext(phydev, YTPHY_MISC_CONFIG_REG,
-+				YTPHY_MCR_FIBER_SPEED_MASK, val);
-+	if (ret < 0)
-+		return ret;
-+
-+	return ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG,
-+				YT8521_CCR_SW_RST, 0);
-+}
-+
-+/**
-+ * ytphy_check_and_restart_aneg - Enable and restart auto-negotiation
-+ * @phydev: target phy_device struct
-+ * @restart: whether aneg restart is requested
-+ *
-+ * NOTE:The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int ytphy_check_and_restart_aneg(struct phy_device *phydev, bool restart)
-+{
-+	int ret;
-+
-+	if (!restart) {
-+		/* Advertisement hasn't changed, but maybe aneg was never on to
-+		 * begin with?  Or maybe phy was isolated?
-+		 */
-+		ret = __phy_read(phydev, MII_BMCR);
-+		if (ret < 0)
-+			return ret;
-+
-+		if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE))
-+			restart = true;
-+	}
-+	/* Enable and Restart Autonegotiation
-+	 * Don't isolate the PHY if we're negotiating
-+	 */
-+	if (restart)
-+		return __phy_modify(phydev, MII_BMCR, BMCR_ISOLATE,
-+				    BMCR_ANENABLE | BMCR_ANRESTART);
-+
-+	return 0;
-+}
-+
-+/**
-+ * yt8521_fiber_config_aneg - restart auto-negotiation or write
-+ * YTPHY_MISC_CONFIG_REG.
-+ * @phydev: target phy_device struct
-+ *
-+ * NOTE:The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_fiber_config_aneg(struct phy_device *phydev)
-+{
-+	int err, changed = 0;
-+	int bmcr;
-+	u16 adv;
-+
-+	if (phydev->autoneg != AUTONEG_ENABLE)
-+		return yt8521_fiber_setup_forced(phydev);
-+
-+	/* enable Fiber auto sensing */
-+	err =  ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG,
-+				0, YT8521_LTCR_EN_AUTOSEN);
-+	if (err < 0)
-+		return err;
-+
-+	err =  ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG,
-+				YT8521_CCR_SW_RST, 0);
-+	if (err < 0)
-+		return err;
-+
-+	bmcr = __phy_read(phydev, MII_BMCR);
-+	if (bmcr < 0)
-+		return bmcr;
-+
-+	/* When it is coming from fiber forced mode, add bmcr power down
-+	 * and power up to let aneg work fine.
-+	 */
-+	if (!(bmcr & BMCR_ANENABLE)) {
-+		__phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN);
-+		usleep_range(1000, 1100);
-+		__phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0);
-+	}
-+
-+	adv = linkmode_adv_to_mii_adv_x(phydev->advertising,
-+					ETHTOOL_LINK_MODE_1000baseX_Full_BIT);
-+
-+	/* Setup fiber advertisement */
-+	err = __phy_modify_changed(phydev, MII_ADVERTISE,
-+				   ADVERTISE_1000XHALF | ADVERTISE_1000XFULL |
-+				   ADVERTISE_1000XPAUSE |
-+				   ADVERTISE_1000XPSE_ASYM,
-+				   adv);
-+	if (err < 0)
-+		return err;
-+
-+	if (err > 0)
-+		changed = 1;
-+
-+	return ytphy_check_and_restart_aneg(phydev, changed);
-+}
-+
-+/**
-+ * ytphy_setup_master_slave
-+ * @phydev: target phy_device struct
-+ *
-+ * NOTE: The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int ytphy_setup_master_slave(struct phy_device *phydev)
-+{
-+	u16 ctl = 0;
-+
-+	if (!phydev->is_gigabit_capable)
-+		return 0;
-+
-+	switch (phydev->master_slave_set) {
-+	case MASTER_SLAVE_CFG_MASTER_PREFERRED:
-+		ctl |= CTL1000_PREFER_MASTER;
-+		break;
-+	case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
-+		break;
-+	case MASTER_SLAVE_CFG_MASTER_FORCE:
-+		ctl |= CTL1000_AS_MASTER;
-+		fallthrough;
-+	case MASTER_SLAVE_CFG_SLAVE_FORCE:
-+		ctl |= CTL1000_ENABLE_MASTER;
-+		break;
-+	case MASTER_SLAVE_CFG_UNKNOWN:
-+	case MASTER_SLAVE_CFG_UNSUPPORTED:
-+		return 0;
-+	default:
-+		phydev_warn(phydev, "Unsupported Master/Slave mode\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	return __phy_modify_changed(phydev, MII_CTRL1000,
-+				    (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER |
-+				    CTL1000_PREFER_MASTER), ctl);
-+}
-+
-+/**
-+ * ytphy_utp_config_advert - sanitize and advertise auto-negotiation parameters
-+ * @phydev: target phy_device struct
-+ *
-+ * NOTE: Writes MII_ADVERTISE with the appropriate values,
-+ * after sanitizing the values to make sure we only advertise
-+ * what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
-+ * hasn't changed, and > 0 if it has changed.
-+ * The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int ytphy_utp_config_advert(struct phy_device *phydev)
-+{
-+	int err, bmsr, changed = 0;
-+	u32 adv;
-+
-+	/* Only allow advertising what this PHY supports */
-+	linkmode_and(phydev->advertising, phydev->advertising,
-+		     phydev->supported);
-+
-+	adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
-+
-+	/* Setup standard advertisement */
-+	err = __phy_modify_changed(phydev, MII_ADVERTISE,
-+				   ADVERTISE_ALL | ADVERTISE_100BASE4 |
-+				   ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
-+				   adv);
-+	if (err < 0)
-+		return err;
-+	if (err > 0)
-+		changed = 1;
-+
-+	bmsr = __phy_read(phydev, MII_BMSR);
-+	if (bmsr < 0)
-+		return bmsr;
-+
-+	/* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
-+	 * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
-+	 * logical 1.
-+	 */
-+	if (!(bmsr & BMSR_ESTATEN))
-+		return changed;
-+
-+	adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
-+
-+	err = __phy_modify_changed(phydev, MII_CTRL1000,
-+				   ADVERTISE_1000FULL | ADVERTISE_1000HALF,
-+				   adv);
-+	if (err < 0)
-+		return err;
-+	if (err > 0)
-+		changed = 1;
-+
-+	return changed;
-+}
-+
-+/**
-+ * ytphy_utp_config_aneg - restart auto-negotiation or write BMCR
-+ * @phydev: target phy_device struct
-+ * @changed: whether autoneg is requested
-+ *
-+ * NOTE: If auto-negotiation is enabled, we configure the
-+ * advertising, and then restart auto-negotiation.  If it is not
-+ * enabled, then we write the BMCR.
-+ * The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int ytphy_utp_config_aneg(struct phy_device *phydev, bool changed)
-+{
-+	int err;
-+	u16 ctl;
-+
-+	err = ytphy_setup_master_slave(phydev);
-+	if (err < 0)
-+		return err;
-+	else if (err)
-+		changed = true;
-+
-+	if (phydev->autoneg != AUTONEG_ENABLE) {
-+		/* configures/forces speed/duplex from @phydev */
-+
-+		ctl = mii_bmcr_encode_fixed(phydev->speed, phydev->duplex);
-+
-+		return __phy_modify(phydev, MII_BMCR, ~(BMCR_LOOPBACK |
-+				    BMCR_ISOLATE | BMCR_PDOWN), ctl);
-+	}
-+
-+	err = ytphy_utp_config_advert(phydev);
-+	if (err < 0) /* error */
-+		return err;
-+	else if (err)
-+		changed = true;
-+
-+	return ytphy_check_and_restart_aneg(phydev, changed);
-+}
-+
-+/**
-+ * yt8521_config_aneg_paged() - switch reg space then call genphy_config_aneg
-+ * of one page
-+ * @phydev: a pointer to a &struct phy_device
-+ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to
-+ * operate.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_config_aneg_paged(struct phy_device *phydev, int page)
-+{
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(fiber_supported);
-+	struct yt8521_priv *priv = phydev->priv;
-+	int old_page;
-+	int ret = 0;
-+
-+	page &= YT8521_RSSR_SPACE_MASK;
-+
-+	old_page = phy_select_page(phydev, page);
-+	if (old_page < 0)
-+		goto err_restore_page;
-+
-+	/* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED,
-+	 * phydev->advertising should be updated.
-+	 */
-+	if (priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) {
-+		linkmode_zero(fiber_supported);
-+		yt8521_prepare_fiber_features(phydev, fiber_supported);
-+
-+		/* prepare fiber_supported, then setup advertising. */
-+		if (page == YT8521_RSSR_FIBER_SPACE) {
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
-+					 fiber_supported);
-+			linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
-+					 fiber_supported);
-+			linkmode_and(phydev->advertising,
-+				     priv->combo_advertising, fiber_supported);
-+		} else {
-+			/* ETHTOOL_LINK_MODE_Autoneg_BIT is also used in utp */
-+			linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
-+					   fiber_supported);
-+			linkmode_andnot(phydev->advertising,
-+					priv->combo_advertising,
-+					fiber_supported);
-+		}
-+	}
-+
-+	if (page == YT8521_RSSR_FIBER_SPACE)
-+		ret = yt8521_fiber_config_aneg(phydev);
-+	else
-+		ret = ytphy_utp_config_aneg(phydev, false);
-+
-+err_restore_page:
-+	return phy_restore_page(phydev, old_page, ret);
-+}
-+
-+/**
-+ * yt8521_config_aneg() - change reg space then call yt8521_config_aneg_paged
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_config_aneg(struct phy_device *phydev)
-+{
-+	struct yt8521_priv *priv = phydev->priv;
-+	int ret;
-+
-+	if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
-+		ret = yt8521_config_aneg_paged(phydev, priv->reg_page);
-+		if (ret < 0)
-+			return ret;
-+	} else {
-+		/* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED,
-+		 * phydev->advertising need to be saved at first run.
-+		 * Because it contains the advertising which supported by both
-+		 * mac and yt8521(utp and fiber).
-+		 */
-+		if (linkmode_empty(priv->combo_advertising)) {
-+			linkmode_copy(priv->combo_advertising,
-+				      phydev->advertising);
-+		}
-+
-+		ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_UTP_SPACE);
-+		if (ret < 0)
-+			return ret;
-+
-+		ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_FIBER_SPACE);
-+		if (ret < 0)
-+			return ret;
-+
-+		/* we don't known which will be link, so restore
-+		 * phydev->advertising as default value.
-+		 */
-+		linkmode_copy(phydev->advertising, priv->combo_advertising);
-+	}
-+	return 0;
-+}
-+
-+/**
-+ * yt8521_aneg_done_paged() - determines the auto negotiation result of one
-+ * page.
-+ * @phydev: a pointer to a &struct phy_device
-+ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to
-+ * operate.
-+ *
-+ * returns 0(no link)or 1(fiber or utp link) or negative errno code
-+ */
-+static int yt8521_aneg_done_paged(struct phy_device *phydev, int page)
-+{
-+	int old_page;
-+	int ret = 0;
-+	int link;
-+
-+	old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK);
-+	if (old_page < 0)
-+		goto err_restore_page;
-+
-+	ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG);
-+	if (ret < 0)
-+		goto err_restore_page;
-+
-+	link = !!(ret & YTPHY_SSR_LINK);
-+	ret = link;
-+
-+err_restore_page:
-+	return phy_restore_page(phydev, old_page, ret);
-+}
-+
-+/**
-+ * yt8521_aneg_done() - determines the auto negotiation result
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns 0(no link)or 1(fiber or utp link) or negative errno code
-+ */
-+static int yt8521_aneg_done(struct phy_device *phydev)
-+{
-+	struct yt8521_priv *priv = phydev->priv;
-+	int link_fiber = 0;
-+	int link_utp;
-+	int link;
-+
-+	if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
-+		link = yt8521_aneg_done_paged(phydev, priv->reg_page);
-+	} else {
-+		link_utp = yt8521_aneg_done_paged(phydev,
-+						  YT8521_RSSR_UTP_SPACE);
-+		if (link_utp < 0)
-+			return link_utp;
-+
-+		if (!link_utp) {
-+			link_fiber = yt8521_aneg_done_paged(phydev,
-+							    YT8521_RSSR_FIBER_SPACE);
-+			if (link_fiber < 0)
-+				return link_fiber;
-+		}
-+		link = link_fiber || link_utp;
-+		phydev_info(phydev, "%s, link_fiber: %d, link_utp: %d\n",
-+			    __func__, link_fiber, link_utp);
-+	}
-+
-+	return link;
-+}
-+
-+/**
-+ * ytphy_utp_read_abilities - read PHY abilities from Clause 22 registers
-+ * @phydev: target phy_device struct
-+ *
-+ * NOTE: Reads the PHY's abilities and populates
-+ * phydev->supported accordingly.
-+ * The caller must have taken the MDIO bus lock.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int ytphy_utp_read_abilities(struct phy_device *phydev)
-+{
-+	int val;
-+
-+	linkmode_set_bit_array(phy_basic_ports_array,
-+			       ARRAY_SIZE(phy_basic_ports_array),
-+			       phydev->supported);
-+
-+	val = __phy_read(phydev, MII_BMSR);
-+	if (val < 0)
-+		return val;
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported,
-+			 val & BMSR_ANEGCAPABLE);
-+
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported,
-+			 val & BMSR_100FULL);
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported,
-+			 val & BMSR_100HALF);
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported,
-+			 val & BMSR_10FULL);
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported,
-+			 val & BMSR_10HALF);
-+
-+	if (val & BMSR_ESTATEN) {
-+		val = __phy_read(phydev, MII_ESTATUS);
-+		if (val < 0)
-+			return val;
-+
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
-+				 phydev->supported, val & ESTATUS_1000_TFULL);
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
-+				 phydev->supported, val & ESTATUS_1000_THALF);
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
-+				 phydev->supported, val & ESTATUS_1000_XFULL);
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ * yt8521_get_features_paged() -  read supported link modes for one page
-+ * @phydev: a pointer to a &struct phy_device
-+ * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to
-+ * operate.
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_get_features_paged(struct phy_device *phydev, int page)
-+{
-+	int old_page;
-+	int ret = 0;
-+
-+	page &= YT8521_RSSR_SPACE_MASK;
-+	old_page = phy_select_page(phydev, page);
-+	if (old_page < 0)
-+		goto err_restore_page;
-+
-+	if (page == YT8521_RSSR_FIBER_SPACE) {
-+		linkmode_zero(phydev->supported);
-+		yt8521_prepare_fiber_features(phydev, phydev->supported);
-+	} else {
-+		ret = ytphy_utp_read_abilities(phydev);
-+		if (ret < 0)
-+			goto err_restore_page;
-+	}
-+
-+err_restore_page:
-+	return phy_restore_page(phydev, old_page, ret);
-+}
-+
-+/**
-+ * yt8521_get_features - switch reg space then call yt8521_get_features_paged
-+ * @phydev: target phy_device struct
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8521_get_features(struct phy_device *phydev)
-+{
-+	struct yt8521_priv *priv = phydev->priv;
-+	int ret;
-+
-+	if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
-+		ret = yt8521_get_features_paged(phydev, priv->reg_page);
-+	} else {
-+		ret = yt8521_get_features_paged(phydev,
-+						YT8521_RSSR_UTP_SPACE);
-+		if (ret < 0)
-+			return ret;
-+
-+		/* add fiber's features to phydev->supported */
-+		yt8521_prepare_fiber_features(phydev, phydev->supported);
-+	}
-+	return ret;
-+}
-+
- static struct phy_driver motorcomm_phy_drvs[] = {
- 	{
- 		PHY_ID_MATCH_EXACT(PHY_ID_YT8511),
-@@ -121,16 +1733,35 @@ static struct phy_driver motorcomm_phy_d
- 		.read_page	= yt8511_read_page,
- 		.write_page	= yt8511_write_page,
- 	},
-+	{
-+		PHY_ID_MATCH_EXACT(PHY_ID_YT8521),
-+		.name		= "YT8521 Gigabit Ethernet",
-+		.get_features	= yt8521_get_features,
-+		.probe		= yt8521_probe,
-+		.read_page	= yt8521_read_page,
-+		.write_page	= yt8521_write_page,
-+		.get_wol	= ytphy_get_wol,
-+		.set_wol	= ytphy_set_wol,
-+		.config_aneg	= yt8521_config_aneg,
-+		.aneg_done	= yt8521_aneg_done,
-+		.config_init	= yt8521_config_init,
-+		.read_status	= yt8521_read_status,
-+		.soft_reset	= yt8521_soft_reset,
-+		.suspend	= yt8521_suspend,
-+		.resume		= yt8521_resume,
-+	},
- };
- 
- module_phy_driver(motorcomm_phy_drvs);
- 
--MODULE_DESCRIPTION("Motorcomm PHY driver");
-+MODULE_DESCRIPTION("Motorcomm 8511/8521 PHY driver");
- MODULE_AUTHOR("Peter Geis");
-+MODULE_AUTHOR("Frank");
- MODULE_LICENSE("GPL");
- 
- static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
- 	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
-+	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8521) },
- 	{ /* sentinal */ }
- };
- 
diff --git a/target/linux/generic/backport-6.1/791-v6.2-02-net-phy-fix-yt8521-duplicated-argument-to-or.patch b/target/linux/generic/backport-6.1/791-v6.2-02-net-phy-fix-yt8521-duplicated-argument-to-or.patch
deleted file mode 100644
index cce71c8d84bf..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.2-02-net-phy-fix-yt8521-duplicated-argument-to-or.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 4e0243e7128c9b25ea2739136076a95d6adaba5e Mon Sep 17 00:00:00 2001
-From: Frank <Frank.Sae@motor-comm.com>
-Date: Fri, 4 Nov 2022 16:44:41 +0800
-Subject: [PATCH] net: phy: fix yt8521 duplicated argument to & or |
-
-cocci warnings: (new ones prefixed by >>)
->> drivers/net/phy/motorcomm.c:1122:8-35: duplicated argument to & or |
-  drivers/net/phy/motorcomm.c:1126:8-35: duplicated argument to & or |
-  drivers/net/phy/motorcomm.c:1130:8-34: duplicated argument to & or |
-  drivers/net/phy/motorcomm.c:1134:8-34: duplicated argument to & or |
-
- The second YT8521_RC1R_GE_TX_DELAY_xx should be YT8521_RC1R_FE_TX_DELAY_xx.
-
-Fixes: 70479a40954c ("net: phy: Add driver for Motorcomm yt8521 gigabit ethernet phy")
-Reported-by: kernel test robot <lkp@intel.com>
-Reported-by: Julia Lawall <julia.lawall@lip6.fr>
-Signed-off-by: Frank <Frank.Sae@motor-comm.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/motorcomm.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -1119,19 +1119,19 @@ static int yt8521_config_init(struct phy
- 
- 	switch (phydev->interface) {
- 	case PHY_INTERFACE_MODE_RGMII:
--		val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS;
-+		val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS;
- 		val |= YT8521_RC1R_RX_DELAY_DIS;
- 		break;
- 	case PHY_INTERFACE_MODE_RGMII_RXID:
--		val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_GE_TX_DELAY_DIS;
-+		val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS;
- 		val |= YT8521_RC1R_RX_DELAY_EN;
- 		break;
- 	case PHY_INTERFACE_MODE_RGMII_TXID:
--		val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN;
-+		val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN;
- 		val |= YT8521_RC1R_RX_DELAY_DIS;
- 		break;
- 	case PHY_INTERFACE_MODE_RGMII_ID:
--		val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_GE_TX_DELAY_EN;
-+		val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN;
- 		val |= YT8521_RC1R_RX_DELAY_EN;
- 		break;
- 	case PHY_INTERFACE_MODE_SGMII:
diff --git a/target/linux/generic/backport-6.1/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch b/target/linux/generic/backport-6.1/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch
deleted file mode 100644
index d22cc69425d4..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From 813abcd98fb1b2cccf850cdfa092a4bfc50b2363 Mon Sep 17 00:00:00 2001
-From: Frank <Frank.Sae@motor-comm.com>
-Date: Tue, 22 Nov 2022 16:42:32 +0800
-Subject: [PATCH] net: phy: add Motorcomm YT8531S phy id.
-
-We added patch for motorcomm.c to support YT8531S. This patch has
-been tested on AM335x platform which has one YT8531S interface
-card and passed all test cases.
-The tested cases indluding: YT8531S UTP function with support of
-10M/100M/1000M; YT8531S Fiber function with support of 100M/1000M;
-and YT8531S Combo function that supports auto detection of media type.
-
-Since most functions of YT8531S are similar to YT8521 and we reuse some
-codes for YT8521 in the patch file.
-
-Signed-off-by: Frank <Frank.Sae@motor-comm.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/Kconfig     |  2 +-
- drivers/net/phy/motorcomm.c | 52 +++++++++++++++++++++++++++++++++----
- 2 files changed, 48 insertions(+), 6 deletions(-)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -257,7 +257,7 @@ config MOTORCOMM_PHY
- 	tristate "Motorcomm PHYs"
- 	help
- 	  Enables support for Motorcomm network PHYs.
--	  Currently supports the YT8511, YT8521 Gigabit Ethernet PHYs.
-+	  Currently supports the YT8511, YT8521, YT8531S Gigabit Ethernet PHYs.
- 
- config NATIONAL_PHY
- 	tristate "National Semiconductor PHYs"
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -1,6 +1,6 @@
- // SPDX-License-Identifier: GPL-2.0+
- /*
-- * Motorcomm 8511/8521 PHY driver.
-+ * Motorcomm 8511/8521/8531S PHY driver.
-  *
-  * Author: Peter Geis <pgwipeout@gmail.com>
-  * Author: Frank <Frank.Sae@motor-comm.com>
-@@ -12,9 +12,10 @@
- #include <linux/phy.h>
- 
- #define PHY_ID_YT8511		0x0000010a
--#define PHY_ID_YT8521				0x0000011A
-+#define PHY_ID_YT8521		0x0000011A
-+#define PHY_ID_YT8531S		0x4F51E91A
- 
--/* YT8521 Register Overview
-+/* YT8521/YT8531S Register Overview
-  *	UTP Register space	|	FIBER Register space
-  *  ------------------------------------------------------------
-  * |	UTP MII			|	FIBER MII		|
-@@ -147,7 +148,7 @@
- #define YT8521_LINK_TIMER_CFG2_REG		0xA5
- #define YT8521_LTCR_EN_AUTOSEN			BIT(15)
- 
--/* 0xA000, 0xA001, 0xA003 ,and 0xA006 ~ 0xA00A  are common ext registers
-+/* 0xA000, 0xA001, 0xA003, 0xA006 ~ 0xA00A and 0xA012 are common ext registers
-  * of yt8521 phy. There is no need to switch reg space when operating these
-  * registers.
-  */
-@@ -221,6 +222,9 @@
-  */
- #define YTPHY_WCR_TYPE_PULSE			BIT(0)
- 
-+#define YT8531S_SYNCE_CFG_REG			0xA012
-+#define YT8531S_SCR_SYNCE_ENABLE		BIT(6)
-+
- /* Extended Register  end */
- 
- struct yt8521_priv {
-@@ -648,6 +652,26 @@ static int yt8521_probe(struct phy_devic
- }
- 
- /**
-+ * yt8531s_probe() - read chip config then set suitable polling_mode
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * returns 0 or negative errno code
-+ */
-+static int yt8531s_probe(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	/* Disable SyncE clock output by default */
-+	ret = ytphy_modify_ext_with_lock(phydev, YT8531S_SYNCE_CFG_REG,
-+					 YT8531S_SCR_SYNCE_ENABLE, 0);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* same as yt8521_probe */
-+	return yt8521_probe(phydev);
-+}
-+
-+/**
-  * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp
-  * @phydev: a pointer to a &struct phy_device
-  *
-@@ -1750,11 +1774,28 @@ static struct phy_driver motorcomm_phy_d
- 		.suspend	= yt8521_suspend,
- 		.resume		= yt8521_resume,
- 	},
-+	{
-+		PHY_ID_MATCH_EXACT(PHY_ID_YT8531S),
-+		.name		= "YT8531S Gigabit Ethernet",
-+		.get_features	= yt8521_get_features,
-+		.probe		= yt8531s_probe,
-+		.read_page	= yt8521_read_page,
-+		.write_page	= yt8521_write_page,
-+		.get_wol	= ytphy_get_wol,
-+		.set_wol	= ytphy_set_wol,
-+		.config_aneg	= yt8521_config_aneg,
-+		.aneg_done	= yt8521_aneg_done,
-+		.config_init	= yt8521_config_init,
-+		.read_status	= yt8521_read_status,
-+		.soft_reset	= yt8521_soft_reset,
-+		.suspend	= yt8521_suspend,
-+		.resume		= yt8521_resume,
-+	},
- };
- 
- module_phy_driver(motorcomm_phy_drvs);
- 
--MODULE_DESCRIPTION("Motorcomm 8511/8521 PHY driver");
-+MODULE_DESCRIPTION("Motorcomm 8511/8521/8531S PHY driver");
- MODULE_AUTHOR("Peter Geis");
- MODULE_AUTHOR("Frank");
- MODULE_LICENSE("GPL");
-@@ -1762,6 +1803,7 @@ MODULE_LICENSE("GPL");
- static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
- 	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
- 	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8521) },
-+	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) },
- 	{ /* sentinal */ }
- };
- 
diff --git a/target/linux/generic/backport-6.1/791-v6.3-04-net-phy-fix-the-spelling-problem-of-Sentinel.patch b/target/linux/generic/backport-6.1/791-v6.3-04-net-phy-fix-the-spelling-problem-of-Sentinel.patch
deleted file mode 100644
index 94fc32aadb32..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.3-04-net-phy-fix-the-spelling-problem-of-Sentinel.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 4104a713204d62aca482eebb0c6226d82a0721eb Mon Sep 17 00:00:00 2001
-From: Frank Sae <Frank.Sae@motor-comm.com>
-Date: Sat, 28 Jan 2023 14:35:57 +0800
-Subject: [PATCH] net: phy: fix the spelling problem of Sentinel
-
-CHECK: 'sentinal' may be misspelled - perhaps 'sentinel'?
-
-Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20230128063558.5850-1-Frank.Sae@motor-comm.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/motorcomm.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -1804,7 +1804,7 @@ static const struct mdio_device_id __may
- 	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
- 	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8521) },
- 	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) },
--	{ /* sentinal */ }
-+	{ /* sentinel */ }
- };
- 
- MODULE_DEVICE_TABLE(mdio, motorcomm_tbl);
diff --git a/target/linux/generic/backport-6.1/791-v6.3-05-net-phy-motorcomm-change-the-phy-id-of-yt8521-and-yt8531s.patch b/target/linux/generic/backport-6.1/791-v6.3-05-net-phy-motorcomm-change-the-phy-id-of-yt8521-and-yt8531s.patch
deleted file mode 100644
index 076fa82d267f..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.3-05-net-phy-motorcomm-change-the-phy-id-of-yt8521-and-yt8531s.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 3c1dc22162d673d595855d24f95200ed2643f88f Mon Sep 17 00:00:00 2001
-From: Frank Sae <Frank.Sae@motor-comm.com>
-Date: Sat, 28 Jan 2023 14:35:58 +0800
-Subject: [PATCH] net: phy: motorcomm: change the phy id of yt8521 and yt8531s
- to lowercase
-
-The phy id is usually defined in lower case.
-
-Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20230128063558.5850-2-Frank.Sae@motor-comm.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/motorcomm.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -12,8 +12,8 @@
- #include <linux/phy.h>
- 
- #define PHY_ID_YT8511		0x0000010a
--#define PHY_ID_YT8521		0x0000011A
--#define PHY_ID_YT8531S		0x4F51E91A
-+#define PHY_ID_YT8521		0x0000011a
-+#define PHY_ID_YT8531S		0x4f51e91a
- 
- /* YT8521/YT8531S Register Overview
-  *	UTP Register space	|	FIBER Register space
diff --git a/target/linux/generic/backport-6.1/791-v6.3-06-net-phy-Add-BIT-macro-for-Motorcomm-yt8521-yt8531-gigabit.patch b/target/linux/generic/backport-6.1/791-v6.3-06-net-phy-Add-BIT-macro-for-Motorcomm-yt8521-yt8531-gigabit.patch
deleted file mode 100644
index ba9a6ab4ccba..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.3-06-net-phy-Add-BIT-macro-for-Motorcomm-yt8521-yt8531-gigabit.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 4869a146cd60fc8115230f0a45e15e534c531922 Mon Sep 17 00:00:00 2001
-From: Frank Sae <Frank.Sae@motor-comm.com>
-Date: Thu, 2 Feb 2023 11:00:34 +0800
-Subject: [PATCH] net: phy: Add BIT macro for Motorcomm yt8521/yt8531 gigabit
- ethernet phy
-
-Add BIT macro for Motorcomm yt8521/yt8531 gigabit ethernet phy.
- This is a preparatory patch. Add BIT macro for 0xA012 reg, and
- supplement for 0xA001 and 0xA003 reg. These will be used to support dts.
-
-Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/motorcomm.c | 55 ++++++++++++++++++++++++++++++++++---
- 1 file changed, 51 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -161,6 +161,11 @@
- 
- #define YT8521_CHIP_CONFIG_REG			0xA001
- #define YT8521_CCR_SW_RST			BIT(15)
-+/* 1b0 disable 1.9ns rxc clock delay  *default*
-+ * 1b1 enable 1.9ns rxc clock delay
-+ */
-+#define YT8521_CCR_RXC_DLY_EN			BIT(8)
-+#define YT8521_CCR_RXC_DLY_1_900_NS		1900
- 
- #define YT8521_CCR_MODE_SEL_MASK		(BIT(2) | BIT(1) | BIT(0))
- #define YT8521_CCR_MODE_UTP_TO_RGMII		0
-@@ -178,22 +183,41 @@
- #define YT8521_MODE_POLL			0x3
- 
- #define YT8521_RGMII_CONFIG1_REG		0xA003
--
-+/* 1b0 use original tx_clk_rgmii  *default*
-+ * 1b1 use inverted tx_clk_rgmii.
-+ */
-+#define YT8521_RC1R_TX_CLK_SEL_INVERTED		BIT(14)
- /* TX Gig-E Delay is bits 3:0, default 0x1
-  * TX Fast-E Delay is bits 7:4, default 0xf
-  * RX Delay is bits 13:10, default 0x0
-  * Delay = 150ps * N
-  * On = 2250ps, off = 0ps
-  */
--#define YT8521_RC1R_RX_DELAY_MASK		(0xF << 10)
-+#define YT8521_RC1R_RX_DELAY_MASK		GENMASK(13, 10)
- #define YT8521_RC1R_RX_DELAY_EN			(0xF << 10)
- #define YT8521_RC1R_RX_DELAY_DIS		(0x0 << 10)
--#define YT8521_RC1R_FE_TX_DELAY_MASK		(0xF << 4)
-+#define YT8521_RC1R_FE_TX_DELAY_MASK		GENMASK(7, 4)
- #define YT8521_RC1R_FE_TX_DELAY_EN		(0xF << 4)
- #define YT8521_RC1R_FE_TX_DELAY_DIS		(0x0 << 4)
--#define YT8521_RC1R_GE_TX_DELAY_MASK		(0xF << 0)
-+#define YT8521_RC1R_GE_TX_DELAY_MASK		GENMASK(3, 0)
- #define YT8521_RC1R_GE_TX_DELAY_EN		(0xF << 0)
- #define YT8521_RC1R_GE_TX_DELAY_DIS		(0x0 << 0)
-+#define YT8521_RC1R_RGMII_0_000_NS		0
-+#define YT8521_RC1R_RGMII_0_150_NS		1
-+#define YT8521_RC1R_RGMII_0_300_NS		2
-+#define YT8521_RC1R_RGMII_0_450_NS		3
-+#define YT8521_RC1R_RGMII_0_600_NS		4
-+#define YT8521_RC1R_RGMII_0_750_NS		5
-+#define YT8521_RC1R_RGMII_0_900_NS		6
-+#define YT8521_RC1R_RGMII_1_050_NS		7
-+#define YT8521_RC1R_RGMII_1_200_NS		8
-+#define YT8521_RC1R_RGMII_1_350_NS		9
-+#define YT8521_RC1R_RGMII_1_500_NS		10
-+#define YT8521_RC1R_RGMII_1_650_NS		11
-+#define YT8521_RC1R_RGMII_1_800_NS		12
-+#define YT8521_RC1R_RGMII_1_950_NS		13
-+#define YT8521_RC1R_RGMII_2_100_NS		14
-+#define YT8521_RC1R_RGMII_2_250_NS		15
- 
- #define YTPHY_MISC_CONFIG_REG			0xA006
- #define YTPHY_MCR_FIBER_SPEED_MASK		BIT(0)
-@@ -222,6 +246,29 @@
-  */
- #define YTPHY_WCR_TYPE_PULSE			BIT(0)
- 
-+#define YTPHY_SYNCE_CFG_REG			0xA012
-+#define YT8521_SCR_SYNCE_ENABLE			BIT(5)
-+/* 1b0 output 25m clock
-+ * 1b1 output 125m clock  *default*
-+ */
-+#define YT8521_SCR_CLK_FRE_SEL_125M		BIT(3)
-+#define YT8521_SCR_CLK_SRC_MASK			GENMASK(2, 1)
-+#define YT8521_SCR_CLK_SRC_PLL_125M		0
-+#define YT8521_SCR_CLK_SRC_UTP_RX		1
-+#define YT8521_SCR_CLK_SRC_SDS_RX		2
-+#define YT8521_SCR_CLK_SRC_REF_25M		3
-+#define YT8531_SCR_SYNCE_ENABLE			BIT(6)
-+/* 1b0 output 25m clock   *default*
-+ * 1b1 output 125m clock
-+ */
-+#define YT8531_SCR_CLK_FRE_SEL_125M		BIT(4)
-+#define YT8531_SCR_CLK_SRC_MASK			GENMASK(3, 1)
-+#define YT8531_SCR_CLK_SRC_PLL_125M		0
-+#define YT8531_SCR_CLK_SRC_UTP_RX		1
-+#define YT8531_SCR_CLK_SRC_SDS_RX		2
-+#define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL	3
-+#define YT8531_SCR_CLK_SRC_REF_25M		4
-+#define YT8531_SCR_CLK_SRC_SSC_25M		5
- #define YT8531S_SYNCE_CFG_REG			0xA012
- #define YT8531S_SCR_SYNCE_ENABLE		BIT(6)
- 
diff --git a/target/linux/generic/backport-6.1/791-v6.3-07-net-phy-Add-dts-support-for-Motorcomm-yt8521-gigabit.patch b/target/linux/generic/backport-6.1/791-v6.3-07-net-phy-Add-dts-support-for-Motorcomm-yt8521-gigabit.patch
deleted file mode 100644
index 6d89fae84ccc..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.3-07-net-phy-Add-dts-support-for-Motorcomm-yt8521-gigabit.patch
+++ /dev/null
@@ -1,343 +0,0 @@
-From a6e68f0f8769f79c67cdcfb6302feecd36197dec Mon Sep 17 00:00:00 2001
-From: Frank Sae <Frank.Sae@motor-comm.com>
-Date: Thu, 2 Feb 2023 11:00:35 +0800
-Subject: [PATCH] net: phy: Add dts support for Motorcomm yt8521 gigabit
- ethernet phy
-
-Add dts support for Motorcomm yt8521 gigabit ethernet phy.
- Add ytphy_rgmii_clk_delay_config function to support dst config for
- the delay of rgmii clk. This funciont is common for yt8521, yt8531s
- and yt8531.
- This patch has been verified on AM335x platform.
-
-Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/motorcomm.c | 253 ++++++++++++++++++++++++++++--------
- 1 file changed, 199 insertions(+), 54 deletions(-)
-
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -10,6 +10,7 @@
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/phy.h>
-+#include <linux/of.h>
- 
- #define PHY_ID_YT8511		0x0000010a
- #define PHY_ID_YT8521		0x0000011a
-@@ -187,21 +188,9 @@
-  * 1b1 use inverted tx_clk_rgmii.
-  */
- #define YT8521_RC1R_TX_CLK_SEL_INVERTED		BIT(14)
--/* TX Gig-E Delay is bits 3:0, default 0x1
-- * TX Fast-E Delay is bits 7:4, default 0xf
-- * RX Delay is bits 13:10, default 0x0
-- * Delay = 150ps * N
-- * On = 2250ps, off = 0ps
-- */
- #define YT8521_RC1R_RX_DELAY_MASK		GENMASK(13, 10)
--#define YT8521_RC1R_RX_DELAY_EN			(0xF << 10)
--#define YT8521_RC1R_RX_DELAY_DIS		(0x0 << 10)
- #define YT8521_RC1R_FE_TX_DELAY_MASK		GENMASK(7, 4)
--#define YT8521_RC1R_FE_TX_DELAY_EN		(0xF << 4)
--#define YT8521_RC1R_FE_TX_DELAY_DIS		(0x0 << 4)
- #define YT8521_RC1R_GE_TX_DELAY_MASK		GENMASK(3, 0)
--#define YT8521_RC1R_GE_TX_DELAY_EN		(0xF << 0)
--#define YT8521_RC1R_GE_TX_DELAY_DIS		(0x0 << 0)
- #define YT8521_RC1R_RGMII_0_000_NS		0
- #define YT8521_RC1R_RGMII_0_150_NS		1
- #define YT8521_RC1R_RGMII_0_300_NS		2
-@@ -274,6 +263,10 @@
- 
- /* Extended Register  end */
- 
-+#define YTPHY_DTS_OUTPUT_CLK_DIS		0
-+#define YTPHY_DTS_OUTPUT_CLK_25M		25000000
-+#define YTPHY_DTS_OUTPUT_CLK_125M		125000000
-+
- struct yt8521_priv {
- 	/* combo_advertising is used for case of YT8521 in combo mode,
- 	 * this means that yt8521 may work in utp or fiber mode which depends
-@@ -641,6 +634,142 @@ static int yt8521_write_page(struct phy_
- };
- 
- /**
-+ * struct ytphy_cfg_reg_map - map a config value to a register value
-+ * @cfg: value in device configuration
-+ * @reg: value in the register
-+ */
-+struct ytphy_cfg_reg_map {
-+	u32 cfg;
-+	u32 reg;
-+};
-+
-+static const struct ytphy_cfg_reg_map ytphy_rgmii_delays[] = {
-+	/* for tx delay / rx delay with YT8521_CCR_RXC_DLY_EN is not set. */
-+	{ 0,	YT8521_RC1R_RGMII_0_000_NS },
-+	{ 150,	YT8521_RC1R_RGMII_0_150_NS },
-+	{ 300,	YT8521_RC1R_RGMII_0_300_NS },
-+	{ 450,	YT8521_RC1R_RGMII_0_450_NS },
-+	{ 600,	YT8521_RC1R_RGMII_0_600_NS },
-+	{ 750,	YT8521_RC1R_RGMII_0_750_NS },
-+	{ 900,	YT8521_RC1R_RGMII_0_900_NS },
-+	{ 1050,	YT8521_RC1R_RGMII_1_050_NS },
-+	{ 1200,	YT8521_RC1R_RGMII_1_200_NS },
-+	{ 1350,	YT8521_RC1R_RGMII_1_350_NS },
-+	{ 1500,	YT8521_RC1R_RGMII_1_500_NS },
-+	{ 1650,	YT8521_RC1R_RGMII_1_650_NS },
-+	{ 1800,	YT8521_RC1R_RGMII_1_800_NS },
-+	{ 1950,	YT8521_RC1R_RGMII_1_950_NS },	/* default tx/rx delay */
-+	{ 2100,	YT8521_RC1R_RGMII_2_100_NS },
-+	{ 2250,	YT8521_RC1R_RGMII_2_250_NS },
-+
-+	/* only for rx delay with YT8521_CCR_RXC_DLY_EN is set. */
-+	{ 0    + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_0_000_NS },
-+	{ 150  + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_0_150_NS },
-+	{ 300  + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_0_300_NS },
-+	{ 450  + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_0_450_NS },
-+	{ 600  + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_0_600_NS },
-+	{ 750  + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_0_750_NS },
-+	{ 900  + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_0_900_NS },
-+	{ 1050 + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_1_050_NS },
-+	{ 1200 + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_1_200_NS },
-+	{ 1350 + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_1_350_NS },
-+	{ 1500 + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_1_500_NS },
-+	{ 1650 + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_1_650_NS },
-+	{ 1800 + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_1_800_NS },
-+	{ 1950 + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_1_950_NS },
-+	{ 2100 + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_2_100_NS },
-+	{ 2250 + YT8521_CCR_RXC_DLY_1_900_NS,	YT8521_RC1R_RGMII_2_250_NS }
-+};
-+
-+static u32 ytphy_get_delay_reg_value(struct phy_device *phydev,
-+				     const char *prop_name,
-+				     const struct ytphy_cfg_reg_map *tbl,
-+				     int tb_size,
-+				     u16 *rxc_dly_en,
-+				     u32 dflt)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	int tb_size_half = tb_size / 2;
-+	u32 val;
-+	int i;
-+
-+	if (of_property_read_u32(node, prop_name, &val))
-+		goto err_dts_val;
-+
-+	/* when rxc_dly_en is NULL, it is get the delay for tx, only half of
-+	 * tb_size is valid.
-+	 */
-+	if (!rxc_dly_en)
-+		tb_size = tb_size_half;
-+
-+	for (i = 0; i < tb_size; i++) {
-+		if (tbl[i].cfg == val) {
-+			if (rxc_dly_en && i < tb_size_half)
-+				*rxc_dly_en = 0;
-+			return tbl[i].reg;
-+		}
-+	}
-+
-+	phydev_warn(phydev, "Unsupported value %d for %s using default (%u)\n",
-+		    val, prop_name, dflt);
-+
-+err_dts_val:
-+	/* when rxc_dly_en is not NULL, it is get the delay for rx.
-+	 * The rx default in dts and ytphy_rgmii_clk_delay_config is 1950 ps,
-+	 * so YT8521_CCR_RXC_DLY_EN should not be set.
-+	 */
-+	if (rxc_dly_en)
-+		*rxc_dly_en = 0;
-+
-+	return dflt;
-+}
-+
-+static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev)
-+{
-+	int tb_size = ARRAY_SIZE(ytphy_rgmii_delays);
-+	u16 rxc_dly_en = YT8521_CCR_RXC_DLY_EN;
-+	u32 rx_reg, tx_reg;
-+	u16 mask, val = 0;
-+	int ret;
-+
-+	rx_reg = ytphy_get_delay_reg_value(phydev, "rx-internal-delay-ps",
-+					   ytphy_rgmii_delays, tb_size,
-+					   &rxc_dly_en,
-+					   YT8521_RC1R_RGMII_1_950_NS);
-+	tx_reg = ytphy_get_delay_reg_value(phydev, "tx-internal-delay-ps",
-+					   ytphy_rgmii_delays, tb_size, NULL,
-+					   YT8521_RC1R_RGMII_1_950_NS);
-+
-+	switch (phydev->interface) {
-+	case PHY_INTERFACE_MODE_RGMII:
-+		rxc_dly_en = 0;
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII_RXID:
-+		val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg);
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII_TXID:
-+		rxc_dly_en = 0;
-+		val |= FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg);
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII_ID:
-+		val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg) |
-+		       FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg);
-+		break;
-+	default: /* do not support other modes */
-+		return -EOPNOTSUPP;
-+	}
-+
-+	ret = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG,
-+			       YT8521_CCR_RXC_DLY_EN, rxc_dly_en);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Generally, it is not necessary to adjust YT8521_RC1R_FE_TX_DELAY */
-+	mask = YT8521_RC1R_RX_DELAY_MASK | YT8521_RC1R_GE_TX_DELAY_MASK;
-+	return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val);
-+}
-+
-+/**
-  * yt8521_probe() - read chip config then set suitable polling_mode
-  * @phydev: a pointer to a &struct phy_device
-  *
-@@ -648,9 +777,12 @@ static int yt8521_write_page(struct phy_
-  */
- static int yt8521_probe(struct phy_device *phydev)
- {
-+	struct device_node *node = phydev->mdio.dev.of_node;
- 	struct device *dev = &phydev->mdio.dev;
- 	struct yt8521_priv *priv;
- 	int chip_config;
-+	u16 mask, val;
-+	u32 freq;
- 	int ret;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-@@ -695,7 +827,45 @@ static int yt8521_probe(struct phy_devic
- 			return ret;
- 	}
- 
--	return 0;
-+	if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq))
-+		freq = YTPHY_DTS_OUTPUT_CLK_DIS;
-+
-+	if (phydev->drv->phy_id == PHY_ID_YT8521) {
-+		switch (freq) {
-+		case YTPHY_DTS_OUTPUT_CLK_DIS:
-+			mask = YT8521_SCR_SYNCE_ENABLE;
-+			val = 0;
-+			break;
-+		case YTPHY_DTS_OUTPUT_CLK_25M:
-+			mask = YT8521_SCR_SYNCE_ENABLE |
-+			       YT8521_SCR_CLK_SRC_MASK |
-+			       YT8521_SCR_CLK_FRE_SEL_125M;
-+			val = YT8521_SCR_SYNCE_ENABLE |
-+			      FIELD_PREP(YT8521_SCR_CLK_SRC_MASK,
-+					 YT8521_SCR_CLK_SRC_REF_25M);
-+			break;
-+		case YTPHY_DTS_OUTPUT_CLK_125M:
-+			mask = YT8521_SCR_SYNCE_ENABLE |
-+			       YT8521_SCR_CLK_SRC_MASK |
-+			       YT8521_SCR_CLK_FRE_SEL_125M;
-+			val = YT8521_SCR_SYNCE_ENABLE |
-+			      YT8521_SCR_CLK_FRE_SEL_125M |
-+			      FIELD_PREP(YT8521_SCR_CLK_SRC_MASK,
-+					 YT8521_SCR_CLK_SRC_PLL_125M);
-+			break;
-+		default:
-+			phydev_warn(phydev, "Freq err:%u\n", freq);
-+			return -EINVAL;
-+		}
-+	} else if (phydev->drv->phy_id == PHY_ID_YT8531S) {
-+		return 0;
-+	} else {
-+		phydev_warn(phydev, "PHY id err\n");
-+		return -EINVAL;
-+	}
-+
-+	return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask,
-+					  val);
- }
- 
- /**
-@@ -1180,61 +1350,36 @@ static int yt8521_resume(struct phy_devi
-  */
- static int yt8521_config_init(struct phy_device *phydev)
- {
-+	struct device_node *node = phydev->mdio.dev.of_node;
- 	int old_page;
- 	int ret = 0;
--	u16 val;
- 
- 	old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE);
- 	if (old_page < 0)
- 		goto err_restore_page;
- 
--	switch (phydev->interface) {
--	case PHY_INTERFACE_MODE_RGMII:
--		val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS;
--		val |= YT8521_RC1R_RX_DELAY_DIS;
--		break;
--	case PHY_INTERFACE_MODE_RGMII_RXID:
--		val = YT8521_RC1R_GE_TX_DELAY_DIS | YT8521_RC1R_FE_TX_DELAY_DIS;
--		val |= YT8521_RC1R_RX_DELAY_EN;
--		break;
--	case PHY_INTERFACE_MODE_RGMII_TXID:
--		val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN;
--		val |= YT8521_RC1R_RX_DELAY_DIS;
--		break;
--	case PHY_INTERFACE_MODE_RGMII_ID:
--		val = YT8521_RC1R_GE_TX_DELAY_EN | YT8521_RC1R_FE_TX_DELAY_EN;
--		val |= YT8521_RC1R_RX_DELAY_EN;
--		break;
--	case PHY_INTERFACE_MODE_SGMII:
--		break;
--	default: /* do not support other modes */
--		ret = -EOPNOTSUPP;
--		goto err_restore_page;
--	}
--
- 	/* set rgmii delay mode */
- 	if (phydev->interface != PHY_INTERFACE_MODE_SGMII) {
--		ret = ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG,
--				       (YT8521_RC1R_RX_DELAY_MASK |
--				       YT8521_RC1R_FE_TX_DELAY_MASK |
--				       YT8521_RC1R_GE_TX_DELAY_MASK),
--				       val);
-+		ret = ytphy_rgmii_clk_delay_config(phydev);
- 		if (ret < 0)
- 			goto err_restore_page;
- 	}
- 
--	/* disable auto sleep */
--	ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG,
--			       YT8521_ESC1R_SLEEP_SW, 0);
--	if (ret < 0)
--		goto err_restore_page;
--
--	/* enable RXC clock when no wire plug */
--	ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG,
--			       YT8521_CGR_RX_CLK_EN, 0);
--	if (ret < 0)
--		goto err_restore_page;
-+	if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) {
-+		/* disable auto sleep */
-+		ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG,
-+				       YT8521_ESC1R_SLEEP_SW, 0);
-+		if (ret < 0)
-+			goto err_restore_page;
-+	}
- 
-+	if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) {
-+		/* enable RXC clock when no wire plug */
-+		ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG,
-+				       YT8521_CGR_RX_CLK_EN, 0);
-+		if (ret < 0)
-+			goto err_restore_page;
-+	}
- err_restore_page:
- 	return phy_restore_page(phydev, old_page, ret);
- }
diff --git a/target/linux/generic/backport-6.1/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch b/target/linux/generic/backport-6.1/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch
deleted file mode 100644
index 86fc04695c8e..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.3-08-net-phy-Add-dts-support-for-Motorcomm-yt8531s-gigabit.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From 36152f87dda4af221b16258751451d9cd3d0fb0b Mon Sep 17 00:00:00 2001
-From: Frank Sae <Frank.Sae@motor-comm.com>
-Date: Thu, 2 Feb 2023 11:00:36 +0800
-Subject: [PATCH] net: phy: Add dts support for Motorcomm yt8531s gigabit
- ethernet phy
-
-Add dts support for Motorcomm yt8531s gigabit ethernet phy.
- Change yt8521_probe to support clk config of yt8531s. Becase
- yt8521_probe does the things which yt8531s is needed, so
- removed yt8531s function.
- This patch has been verified on AM335x platform with yt8531s board.
-
-Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/motorcomm.c | 51 ++++++++++++++++++++-----------------
- 1 file changed, 27 insertions(+), 24 deletions(-)
-
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -258,8 +258,6 @@
- #define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL	3
- #define YT8531_SCR_CLK_SRC_REF_25M		4
- #define YT8531_SCR_CLK_SRC_SSC_25M		5
--#define YT8531S_SYNCE_CFG_REG			0xA012
--#define YT8531S_SCR_SYNCE_ENABLE		BIT(6)
- 
- /* Extended Register  end */
- 
-@@ -858,7 +856,32 @@ static int yt8521_probe(struct phy_devic
- 			return -EINVAL;
- 		}
- 	} else if (phydev->drv->phy_id == PHY_ID_YT8531S) {
--		return 0;
-+		switch (freq) {
-+		case YTPHY_DTS_OUTPUT_CLK_DIS:
-+			mask = YT8531_SCR_SYNCE_ENABLE;
-+			val = 0;
-+			break;
-+		case YTPHY_DTS_OUTPUT_CLK_25M:
-+			mask = YT8531_SCR_SYNCE_ENABLE |
-+			       YT8531_SCR_CLK_SRC_MASK |
-+			       YT8531_SCR_CLK_FRE_SEL_125M;
-+			val = YT8531_SCR_SYNCE_ENABLE |
-+			      FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
-+					 YT8531_SCR_CLK_SRC_REF_25M);
-+			break;
-+		case YTPHY_DTS_OUTPUT_CLK_125M:
-+			mask = YT8531_SCR_SYNCE_ENABLE |
-+			       YT8531_SCR_CLK_SRC_MASK |
-+			       YT8531_SCR_CLK_FRE_SEL_125M;
-+			val = YT8531_SCR_SYNCE_ENABLE |
-+			      YT8531_SCR_CLK_FRE_SEL_125M |
-+			      FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
-+					 YT8531_SCR_CLK_SRC_PLL_125M);
-+			break;
-+		default:
-+			phydev_warn(phydev, "Freq err:%u\n", freq);
-+			return -EINVAL;
-+		}
- 	} else {
- 		phydev_warn(phydev, "PHY id err\n");
- 		return -EINVAL;
-@@ -869,26 +892,6 @@ static int yt8521_probe(struct phy_devic
- }
- 
- /**
-- * yt8531s_probe() - read chip config then set suitable polling_mode
-- * @phydev: a pointer to a &struct phy_device
-- *
-- * returns 0 or negative errno code
-- */
--static int yt8531s_probe(struct phy_device *phydev)
--{
--	int ret;
--
--	/* Disable SyncE clock output by default */
--	ret = ytphy_modify_ext_with_lock(phydev, YT8531S_SYNCE_CFG_REG,
--					 YT8531S_SCR_SYNCE_ENABLE, 0);
--	if (ret < 0)
--		return ret;
--
--	/* same as yt8521_probe */
--	return yt8521_probe(phydev);
--}
--
--/**
-  * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp
-  * @phydev: a pointer to a &struct phy_device
-  *
-@@ -1970,7 +1973,7 @@ static struct phy_driver motorcomm_phy_d
- 		PHY_ID_MATCH_EXACT(PHY_ID_YT8531S),
- 		.name		= "YT8531S Gigabit Ethernet",
- 		.get_features	= yt8521_get_features,
--		.probe		= yt8531s_probe,
-+		.probe		= yt8521_probe,
- 		.read_page	= yt8521_read_page,
- 		.write_page	= yt8521_write_page,
- 		.get_wol	= ytphy_get_wol,
diff --git a/target/linux/generic/backport-6.1/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch b/target/linux/generic/backport-6.1/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch
deleted file mode 100644
index 60eea4fa477e..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.3-09-net-phy-Add-driver-for-Motorcomm-yt8531-gigabit-ethernet.patch
+++ /dev/null
@@ -1,302 +0,0 @@
-From 4ac94f728a588e7096dd5010cd7141a309ea7805 Mon Sep 17 00:00:00 2001
-From: Frank Sae <Frank.Sae@motor-comm.com>
-Date: Thu, 2 Feb 2023 11:00:37 +0800
-Subject: [PATCH] net: phy: Add driver for Motorcomm yt8531 gigabit ethernet
- phy
-
-Add a driver for the motorcomm yt8531 gigabit ethernet phy. We have
- verified the driver on AM335x platform with yt8531 board. On the
- board, yt8531 gigabit ethernet phy works in utp mode, RGMII
- interface, supports 1000M/100M/10M speeds, and wol(magic package).
-
-Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/Kconfig     |   2 +-
- drivers/net/phy/motorcomm.c | 208 +++++++++++++++++++++++++++++++++++-
- 2 files changed, 207 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -257,7 +257,7 @@ config MOTORCOMM_PHY
- 	tristate "Motorcomm PHYs"
- 	help
- 	  Enables support for Motorcomm network PHYs.
--	  Currently supports the YT8511, YT8521, YT8531S Gigabit Ethernet PHYs.
-+	  Currently supports YT85xx Gigabit Ethernet PHYs.
- 
- config NATIONAL_PHY
- 	tristate "National Semiconductor PHYs"
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -1,6 +1,6 @@
- // SPDX-License-Identifier: GPL-2.0+
- /*
-- * Motorcomm 8511/8521/8531S PHY driver.
-+ * Motorcomm 8511/8521/8531/8531S PHY driver.
-  *
-  * Author: Peter Geis <pgwipeout@gmail.com>
-  * Author: Frank <Frank.Sae@motor-comm.com>
-@@ -14,6 +14,7 @@
- 
- #define PHY_ID_YT8511		0x0000010a
- #define PHY_ID_YT8521		0x0000011a
-+#define PHY_ID_YT8531		0x4f51e91b
- #define PHY_ID_YT8531S		0x4f51e91a
- 
- /* YT8521/YT8531S Register Overview
-@@ -517,6 +518,61 @@ err_restore_page:
- 	return phy_restore_page(phydev, old_page, ret);
- }
- 
-+static int yt8531_set_wol(struct phy_device *phydev,
-+			  struct ethtool_wolinfo *wol)
-+{
-+	const u16 mac_addr_reg[] = {
-+		YTPHY_WOL_MACADDR2_REG,
-+		YTPHY_WOL_MACADDR1_REG,
-+		YTPHY_WOL_MACADDR0_REG,
-+	};
-+	const u8 *mac_addr;
-+	u16 mask, val;
-+	int ret;
-+	u8 i;
-+
-+	if (wol->wolopts & WAKE_MAGIC) {
-+		mac_addr = phydev->attached_dev->dev_addr;
-+
-+		/* Store the device address for the magic packet */
-+		for (i = 0; i < 3; i++) {
-+			ret = ytphy_write_ext_with_lock(phydev, mac_addr_reg[i],
-+							((mac_addr[i * 2] << 8)) |
-+							(mac_addr[i * 2 + 1]));
-+			if (ret < 0)
-+				return ret;
-+		}
-+
-+		/* Enable WOL feature */
-+		mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL;
-+		val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
-+		val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS;
-+		ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG,
-+						 mask, val);
-+		if (ret < 0)
-+			return ret;
-+
-+		/* Enable WOL interrupt */
-+		ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0,
-+				 YTPHY_IER_WOL);
-+		if (ret < 0)
-+			return ret;
-+	} else {
-+		/* Disable WOL feature */
-+		mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL;
-+		ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG,
-+						 mask, 0);
-+
-+		/* Disable WOL interrupt */
-+		ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG,
-+				 YTPHY_IER_WOL, 0);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
- static int yt8511_read_page(struct phy_device *phydev)
- {
- 	return __phy_read(phydev, YT8511_PAGE_SELECT);
-@@ -767,6 +823,17 @@ static int ytphy_rgmii_clk_delay_config(
- 	return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val);
- }
- 
-+static int ytphy_rgmii_clk_delay_config_with_lock(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	phy_lock_mdio_bus(phydev);
-+	ret = ytphy_rgmii_clk_delay_config(phydev);
-+	phy_unlock_mdio_bus(phydev);
-+
-+	return ret;
-+}
-+
- /**
-  * yt8521_probe() - read chip config then set suitable polling_mode
-  * @phydev: a pointer to a &struct phy_device
-@@ -891,6 +958,43 @@ static int yt8521_probe(struct phy_devic
- 					  val);
- }
- 
-+static int yt8531_probe(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	u16 mask, val;
-+	u32 freq;
-+
-+	if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq))
-+		freq = YTPHY_DTS_OUTPUT_CLK_DIS;
-+
-+	switch (freq) {
-+	case YTPHY_DTS_OUTPUT_CLK_DIS:
-+		mask = YT8531_SCR_SYNCE_ENABLE;
-+		val = 0;
-+		break;
-+	case YTPHY_DTS_OUTPUT_CLK_25M:
-+		mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK |
-+		       YT8531_SCR_CLK_FRE_SEL_125M;
-+		val = YT8531_SCR_SYNCE_ENABLE |
-+		      FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
-+				 YT8531_SCR_CLK_SRC_REF_25M);
-+		break;
-+	case YTPHY_DTS_OUTPUT_CLK_125M:
-+		mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK |
-+		       YT8531_SCR_CLK_FRE_SEL_125M;
-+		val = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_FRE_SEL_125M |
-+		      FIELD_PREP(YT8531_SCR_CLK_SRC_MASK,
-+				 YT8531_SCR_CLK_SRC_PLL_125M);
-+		break;
-+	default:
-+		phydev_warn(phydev, "Freq err:%u\n", freq);
-+		return -EINVAL;
-+	}
-+
-+	return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask,
-+					  val);
-+}
-+
- /**
-  * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp
-  * @phydev: a pointer to a &struct phy_device
-@@ -1387,6 +1491,94 @@ err_restore_page:
- 	return phy_restore_page(phydev, old_page, ret);
- }
- 
-+static int yt8531_config_init(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	int ret;
-+
-+	ret = ytphy_rgmii_clk_delay_config_with_lock(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) {
-+		/* disable auto sleep */
-+		ret = ytphy_modify_ext_with_lock(phydev,
-+						 YT8521_EXTREG_SLEEP_CONTROL1_REG,
-+						 YT8521_ESC1R_SLEEP_SW, 0);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) {
-+		/* enable RXC clock when no wire plug */
-+		ret = ytphy_modify_ext_with_lock(phydev,
-+						 YT8521_CLOCK_GATING_REG,
-+						 YT8521_CGR_RX_CLK_EN, 0);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ * yt8531_link_change_notify() - Adjust the tx clock direction according to
-+ * the current speed and dts config.
-+ * @phydev: a pointer to a &struct phy_device
-+ *
-+ * NOTE: This function is only used to adapt to VF2 with JH7110 SoC. Please
-+ * keep "motorcomm,tx-clk-adj-enabled" not exist in dts when the soc is not
-+ * JH7110.
-+ */
-+static void yt8531_link_change_notify(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	bool tx_clk_adj_enabled = false;
-+	bool tx_clk_1000_inverted;
-+	bool tx_clk_100_inverted;
-+	bool tx_clk_10_inverted;
-+	u16 val = 0;
-+	int ret;
-+
-+	if (of_property_read_bool(node, "motorcomm,tx-clk-adj-enabled"))
-+		tx_clk_adj_enabled = true;
-+
-+	if (!tx_clk_adj_enabled)
-+		return;
-+
-+	if (of_property_read_bool(node, "motorcomm,tx-clk-10-inverted"))
-+		tx_clk_10_inverted = true;
-+	if (of_property_read_bool(node, "motorcomm,tx-clk-100-inverted"))
-+		tx_clk_100_inverted = true;
-+	if (of_property_read_bool(node, "motorcomm,tx-clk-1000-inverted"))
-+		tx_clk_1000_inverted = true;
-+
-+	if (phydev->speed < 0)
-+		return;
-+
-+	switch (phydev->speed) {
-+	case SPEED_1000:
-+		if (tx_clk_1000_inverted)
-+			val = YT8521_RC1R_TX_CLK_SEL_INVERTED;
-+		break;
-+	case SPEED_100:
-+		if (tx_clk_100_inverted)
-+			val = YT8521_RC1R_TX_CLK_SEL_INVERTED;
-+		break;
-+	case SPEED_10:
-+		if (tx_clk_10_inverted)
-+			val = YT8521_RC1R_TX_CLK_SEL_INVERTED;
-+		break;
-+	default:
-+		return;
-+	}
-+
-+	ret = ytphy_modify_ext_with_lock(phydev, YT8521_RGMII_CONFIG1_REG,
-+					 YT8521_RC1R_TX_CLK_SEL_INVERTED, val);
-+	if (ret < 0)
-+		phydev_warn(phydev, "Modify TX_CLK_SEL err:%d\n", ret);
-+}
-+
- /**
-  * yt8521_prepare_fiber_features() -  A small helper function that setup
-  * fiber's features.
-@@ -1970,6 +2162,17 @@ static struct phy_driver motorcomm_phy_d
- 		.resume		= yt8521_resume,
- 	},
- 	{
-+		PHY_ID_MATCH_EXACT(PHY_ID_YT8531),
-+		.name		= "YT8531 Gigabit Ethernet",
-+		.probe		= yt8531_probe,
-+		.config_init	= yt8531_config_init,
-+		.suspend	= genphy_suspend,
-+		.resume		= genphy_resume,
-+		.get_wol	= ytphy_get_wol,
-+		.set_wol	= yt8531_set_wol,
-+		.link_change_notify = yt8531_link_change_notify,
-+	},
-+	{
- 		PHY_ID_MATCH_EXACT(PHY_ID_YT8531S),
- 		.name		= "YT8531S Gigabit Ethernet",
- 		.get_features	= yt8521_get_features,
-@@ -1990,7 +2193,7 @@ static struct phy_driver motorcomm_phy_d
- 
- module_phy_driver(motorcomm_phy_drvs);
- 
--MODULE_DESCRIPTION("Motorcomm 8511/8521/8531S PHY driver");
-+MODULE_DESCRIPTION("Motorcomm 8511/8521/8531/8531S PHY driver");
- MODULE_AUTHOR("Peter Geis");
- MODULE_AUTHOR("Frank");
- MODULE_LICENSE("GPL");
-@@ -1998,6 +2201,7 @@ MODULE_LICENSE("GPL");
- static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = {
- 	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8511) },
- 	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8521) },
-+	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8531) },
- 	{ PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) },
- 	{ /* sentinel */ }
- };
diff --git a/target/linux/generic/backport-6.1/791-v6.3-10-net-phy-motorcomm-uninitialized-variables-in.patch b/target/linux/generic/backport-6.1/791-v6.3-10-net-phy-motorcomm-uninitialized-variables-in.patch
deleted file mode 100644
index 29ae86dbbc2c..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.3-10-net-phy-motorcomm-uninitialized-variables-in.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 9753613f7399601f9bae6ee81e9d4274246c98ab Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <error27@gmail.com>
-Date: Wed, 15 Feb 2023 07:21:47 +0300
-Subject: [PATCH] net: phy: motorcomm: uninitialized variables in
- yt8531_link_change_notify()
-
-These booleans are never set to false, but are just used without being
-initialized.
-
-Fixes: 4ac94f728a58 ("net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy")
-Signed-off-by: Dan Carpenter <error27@gmail.com>
-Reviewed-by: Frank Sae <Frank.Sae@motor-comm.com>
-Link: https://lore.kernel.org/r/Y+xd2yJet2ImHLoQ@kili
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/motorcomm.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -1533,10 +1533,10 @@ static int yt8531_config_init(struct phy
- static void yt8531_link_change_notify(struct phy_device *phydev)
- {
- 	struct device_node *node = phydev->mdio.dev.of_node;
-+	bool tx_clk_1000_inverted = false;
-+	bool tx_clk_100_inverted = false;
-+	bool tx_clk_10_inverted = false;
- 	bool tx_clk_adj_enabled = false;
--	bool tx_clk_1000_inverted;
--	bool tx_clk_100_inverted;
--	bool tx_clk_10_inverted;
- 	u16 val = 0;
- 	int ret;
- 
diff --git a/target/linux/generic/backport-6.1/791-v6.6-11-net-phy-motorcomm-Add-pad-drive-strength-cfg-support.patch b/target/linux/generic/backport-6.1/791-v6.6-11-net-phy-motorcomm-Add-pad-drive-strength-cfg-support.patch
deleted file mode 100644
index 010ca9b68aac..000000000000
--- a/target/linux/generic/backport-6.1/791-v6.6-11-net-phy-motorcomm-Add-pad-drive-strength-cfg-support.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From 7a561e9351ae7e3fb1f08584d40b49c1e55dde60 Mon Sep 17 00:00:00 2001
-From: Samin Guo <samin.guo@starfivetech.com>
-Date: Thu, 20 Jul 2023 19:15:09 +0800
-Subject: [PATCH] net: phy: motorcomm: Add pad drive strength cfg support
-
-The motorcomm phy (YT8531) supports the ability to adjust the drive
-strength of the rx_clk/rx_data, and the default strength may not be
-suitable for all boards. So add configurable options to better match
-the boards.(e.g. StarFive VisionFive 2)
-
-When we configure the drive strength, we need to read the current
-LDO voltage value to ensure that it is a legal value at that LDO
-voltage.
-
-Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
-Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/motorcomm.c | 118 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 118 insertions(+)
-
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -163,6 +163,10 @@
- 
- #define YT8521_CHIP_CONFIG_REG			0xA001
- #define YT8521_CCR_SW_RST			BIT(15)
-+#define YT8531_RGMII_LDO_VOL_MASK		GENMASK(5, 4)
-+#define YT8531_LDO_VOL_3V3			0x0
-+#define YT8531_LDO_VOL_1V8			0x2
-+
- /* 1b0 disable 1.9ns rxc clock delay  *default*
-  * 1b1 enable 1.9ns rxc clock delay
-  */
-@@ -236,6 +240,12 @@
-  */
- #define YTPHY_WCR_TYPE_PULSE			BIT(0)
- 
-+#define YTPHY_PAD_DRIVE_STRENGTH_REG		0xA010
-+#define YT8531_RGMII_RXC_DS_MASK		GENMASK(15, 13)
-+#define YT8531_RGMII_RXD_DS_HI_MASK		BIT(12)		/* Bit 2 of rxd_ds */
-+#define YT8531_RGMII_RXD_DS_LOW_MASK		GENMASK(5, 4)	/* Bit 1/0 of rxd_ds */
-+#define YT8531_RGMII_RX_DS_DEFAULT		0x3
-+
- #define YTPHY_SYNCE_CFG_REG			0xA012
- #define YT8521_SCR_SYNCE_ENABLE			BIT(5)
- /* 1b0 output 25m clock
-@@ -835,6 +845,110 @@ static int ytphy_rgmii_clk_delay_config_
- }
- 
- /**
-+ * struct ytphy_ldo_vol_map - map a current value to a register value
-+ * @vol: ldo voltage
-+ * @ds:  value in the register
-+ * @cur: value in device configuration
-+ */
-+struct ytphy_ldo_vol_map {
-+	u32 vol;
-+	u32 ds;
-+	u32 cur;
-+};
-+
-+static const struct ytphy_ldo_vol_map yt8531_ldo_vol[] = {
-+	{.vol = YT8531_LDO_VOL_1V8, .ds = 0, .cur = 1200},
-+	{.vol = YT8531_LDO_VOL_1V8, .ds = 1, .cur = 2100},
-+	{.vol = YT8531_LDO_VOL_1V8, .ds = 2, .cur = 2700},
-+	{.vol = YT8531_LDO_VOL_1V8, .ds = 3, .cur = 2910},
-+	{.vol = YT8531_LDO_VOL_1V8, .ds = 4, .cur = 3110},
-+	{.vol = YT8531_LDO_VOL_1V8, .ds = 5, .cur = 3600},
-+	{.vol = YT8531_LDO_VOL_1V8, .ds = 6, .cur = 3970},
-+	{.vol = YT8531_LDO_VOL_1V8, .ds = 7, .cur = 4350},
-+	{.vol = YT8531_LDO_VOL_3V3, .ds = 0, .cur = 3070},
-+	{.vol = YT8531_LDO_VOL_3V3, .ds = 1, .cur = 4080},
-+	{.vol = YT8531_LDO_VOL_3V3, .ds = 2, .cur = 4370},
-+	{.vol = YT8531_LDO_VOL_3V3, .ds = 3, .cur = 4680},
-+	{.vol = YT8531_LDO_VOL_3V3, .ds = 4, .cur = 5020},
-+	{.vol = YT8531_LDO_VOL_3V3, .ds = 5, .cur = 5450},
-+	{.vol = YT8531_LDO_VOL_3V3, .ds = 6, .cur = 5740},
-+	{.vol = YT8531_LDO_VOL_3V3, .ds = 7, .cur = 6140},
-+};
-+
-+static u32 yt8531_get_ldo_vol(struct phy_device *phydev)
-+{
-+	u32 val;
-+
-+	val = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG);
-+	val = FIELD_GET(YT8531_RGMII_LDO_VOL_MASK, val);
-+
-+	return val <= YT8531_LDO_VOL_1V8 ? val : YT8531_LDO_VOL_1V8;
-+}
-+
-+static int yt8531_get_ds_map(struct phy_device *phydev, u32 cur)
-+{
-+	u32 vol;
-+	int i;
-+
-+	vol = yt8531_get_ldo_vol(phydev);
-+	for (i = 0; i < ARRAY_SIZE(yt8531_ldo_vol); i++) {
-+		if (yt8531_ldo_vol[i].vol == vol && yt8531_ldo_vol[i].cur == cur)
-+			return yt8531_ldo_vol[i].ds;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static int yt8531_set_ds(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	u32 ds_field_low, ds_field_hi, val;
-+	int ret, ds;
-+
-+	/* set rgmii rx clk driver strength */
-+	if (!of_property_read_u32(node, "motorcomm,rx-clk-drv-microamp", &val)) {
-+		ds = yt8531_get_ds_map(phydev, val);
-+		if (ds < 0)
-+			return dev_err_probe(&phydev->mdio.dev, ds,
-+					     "No matching current value was found.\n");
-+	} else {
-+		ds = YT8531_RGMII_RX_DS_DEFAULT;
-+	}
-+
-+	ret = ytphy_modify_ext_with_lock(phydev,
-+					 YTPHY_PAD_DRIVE_STRENGTH_REG,
-+					 YT8531_RGMII_RXC_DS_MASK,
-+					 FIELD_PREP(YT8531_RGMII_RXC_DS_MASK, ds));
-+	if (ret < 0)
-+		return ret;
-+
-+	/* set rgmii rx data driver strength */
-+	if (!of_property_read_u32(node, "motorcomm,rx-data-drv-microamp", &val)) {
-+		ds = yt8531_get_ds_map(phydev, val);
-+		if (ds < 0)
-+			return dev_err_probe(&phydev->mdio.dev, ds,
-+					     "No matching current value was found.\n");
-+	} else {
-+		ds = YT8531_RGMII_RX_DS_DEFAULT;
-+	}
-+
-+	ds_field_hi = FIELD_GET(BIT(2), ds);
-+	ds_field_hi = FIELD_PREP(YT8531_RGMII_RXD_DS_HI_MASK, ds_field_hi);
-+
-+	ds_field_low = FIELD_GET(GENMASK(1, 0), ds);
-+	ds_field_low = FIELD_PREP(YT8531_RGMII_RXD_DS_LOW_MASK, ds_field_low);
-+
-+	ret = ytphy_modify_ext_with_lock(phydev,
-+					 YTPHY_PAD_DRIVE_STRENGTH_REG,
-+					 YT8531_RGMII_RXD_DS_LOW_MASK | YT8531_RGMII_RXD_DS_HI_MASK,
-+					 ds_field_low | ds_field_hi);
-+	if (ret < 0)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+/**
-  * yt8521_probe() - read chip config then set suitable polling_mode
-  * @phydev: a pointer to a &struct phy_device
-  *
-@@ -1518,6 +1632,10 @@ static int yt8531_config_init(struct phy
- 			return ret;
- 	}
- 
-+	ret = yt8531_set_ds(phydev);
-+	if (ret < 0)
-+		return ret;
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-6.1/792-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch b/target/linux/generic/backport-6.1/792-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch
deleted file mode 100644
index f82c8fc622b9..000000000000
--- a/target/linux/generic/backport-6.1/792-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 90ef0a7b0622c62758b2638604927867775479ea Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Thu, 13 Jul 2023 09:42:07 +0100
-Subject: [PATCH] net: phylink: add pcs_enable()/pcs_disable() methods
-
-Add phylink PCS enable/disable callbacks that will allow us to place
-IEEE 802.3 register compliant PCS in power-down mode while not being
-used.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phylink.c | 48 +++++++++++++++++++++++++++++++--------
- include/linux/phylink.h   | 16 +++++++++++++
- 2 files changed, 55 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -34,6 +34,10 @@ enum {
- 	PHYLINK_DISABLE_STOPPED,
- 	PHYLINK_DISABLE_LINK,
- 	PHYLINK_DISABLE_MAC_WOL,
-+
-+	PCS_STATE_DOWN = 0,
-+	PCS_STATE_STARTING,
-+	PCS_STATE_STARTED,
- };
- 
- /**
-@@ -72,6 +76,7 @@ struct phylink {
- 	struct phylink_link_state phy_state;
- 	struct work_struct resolve;
- 	unsigned int pcs_neg_mode;
-+	unsigned int pcs_state;
- 
- 	bool mac_link_dropped;
- 	bool using_mac_select_pcs;
-@@ -992,6 +997,22 @@ static void phylink_resolve_an_pause(str
- 	}
- }
- 
-+static void phylink_pcs_disable(struct phylink_pcs *pcs)
-+{
-+	if (pcs && pcs->ops->pcs_disable)
-+		pcs->ops->pcs_disable(pcs);
-+}
-+
-+static int phylink_pcs_enable(struct phylink_pcs *pcs)
-+{
-+	int err = 0;
-+
-+	if (pcs && pcs->ops->pcs_enable)
-+		err = pcs->ops->pcs_enable(pcs);
-+
-+	return err;
-+}
-+
- static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
- 			      const struct phylink_link_state *state,
- 			      bool permit_pause_to_mac)
-@@ -1094,11 +1115,17 @@ static void phylink_major_config(struct
- 	/* If we have a new PCS, switch to the new PCS after preparing the MAC
- 	 * for the change.
- 	 */
--	if (pcs_changed)
-+	if (pcs_changed) {
-+		phylink_pcs_disable(pl->pcs);
-+
- 		pl->pcs = pcs;
-+	}
- 
- 	phylink_mac_config(pl, state);
- 
-+	if (pl->pcs_state == PCS_STATE_STARTING || pcs_changed)
-+		phylink_pcs_enable(pl->pcs);
-+
- 	neg_mode = pl->cur_link_an_mode;
- 	if (pl->pcs && pl->pcs->neg_mode)
- 		neg_mode = pl->pcs_neg_mode;
-@@ -1586,6 +1613,7 @@ struct phylink *phylink_create(struct ph
- 	pl->link_config.pause = MLO_PAUSE_AN;
- 	pl->link_config.speed = SPEED_UNKNOWN;
- 	pl->link_config.duplex = DUPLEX_UNKNOWN;
-+	pl->pcs_state = PCS_STATE_DOWN;
- 	pl->mac_ops = mac_ops;
- 	__set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
- 	timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
-@@ -1987,6 +2015,8 @@ void phylink_start(struct phylink *pl)
- 	if (pl->netdev)
- 		netif_carrier_off(pl->netdev);
- 
-+	pl->pcs_state = PCS_STATE_STARTING;
-+
- 	/* Apply the link configuration to the MAC when starting. This allows
- 	 * a fixed-link to start with the correct parameters, and also
- 	 * ensures that we set the appropriate advertisement for Serdes links.
-@@ -1997,6 +2027,8 @@ void phylink_start(struct phylink *pl)
- 	 */
- 	phylink_mac_initial_config(pl, true);
- 
-+	pl->pcs_state = PCS_STATE_STARTED;
-+
- 	phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_STOPPED);
- 
- 	if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
-@@ -2015,15 +2047,9 @@ void phylink_start(struct phylink *pl)
- 			poll = true;
- 	}
- 
--	switch (pl->cfg_link_an_mode) {
--	case MLO_AN_FIXED:
-+	if (pl->cfg_link_an_mode == MLO_AN_FIXED)
- 		poll |= pl->config->poll_fixed_state;
--		break;
--	case MLO_AN_INBAND:
--		if (pl->pcs)
--			poll |= pl->pcs->poll;
--		break;
--	}
-+
- 	if (poll)
- 		mod_timer(&pl->link_poll, jiffies + HZ);
- 	if (pl->phydev)
-@@ -2060,6 +2086,10 @@ void phylink_stop(struct phylink *pl)
- 	}
- 
- 	phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED);
-+
-+	pl->pcs_state = PCS_STATE_DOWN;
-+
-+	phylink_pcs_disable(pl->pcs);
- }
- EXPORT_SYMBOL_GPL(phylink_stop);
- 
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -533,6 +533,8 @@ struct phylink_pcs {
- /**
-  * struct phylink_pcs_ops - MAC PCS operations structure.
-  * @pcs_validate: validate the link configuration.
-+ * @pcs_enable: enable the PCS.
-+ * @pcs_disable: disable the PCS.
-  * @pcs_get_state: read the current MAC PCS link state from the hardware.
-  * @pcs_config: configure the MAC PCS for the selected mode and state.
-  * @pcs_an_restart: restart 802.3z BaseX autonegotiation.
-@@ -542,6 +544,8 @@ struct phylink_pcs {
- struct phylink_pcs_ops {
- 	int (*pcs_validate)(struct phylink_pcs *pcs, unsigned long *supported,
- 			    const struct phylink_link_state *state);
-+	int (*pcs_enable)(struct phylink_pcs *pcs);
-+	void (*pcs_disable)(struct phylink_pcs *pcs);
- 	void (*pcs_get_state)(struct phylink_pcs *pcs,
- 			      struct phylink_link_state *state);
- 	int (*pcs_config)(struct phylink_pcs *pcs, unsigned int neg_mode,
-@@ -572,6 +576,18 @@ int pcs_validate(struct phylink_pcs *pcs
- 		 const struct phylink_link_state *state);
- 
- /**
-+ * pcs_enable() - enable the PCS.
-+ * @pcs: a pointer to a &struct phylink_pcs.
-+ */
-+int pcs_enable(struct phylink_pcs *pcs);
-+
-+/**
-+ * pcs_disable() - disable the PCS.
-+ * @pcs: a pointer to a &struct phylink_pcs.
-+ */
-+void pcs_disable(struct phylink_pcs *pcs);
-+
-+/**
-  * pcs_get_state() - Read the current inband link state from the hardware
-  * @pcs: a pointer to a &struct phylink_pcs.
-  * @state: a pointer to a &struct phylink_link_state.
diff --git a/target/linux/generic/backport-6.1/793-v6.6-net-pcs-lynxi-implement-pcs_disable-op.patch b/target/linux/generic/backport-6.1/793-v6.6-net-pcs-lynxi-implement-pcs_disable-op.patch
deleted file mode 100644
index 6b6369761a18..000000000000
--- a/target/linux/generic/backport-6.1/793-v6.6-net-pcs-lynxi-implement-pcs_disable-op.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From e4ccdfb78a47132f2d215658aab8902fc457c4b4 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 18 Aug 2023 04:07:46 +0100
-Subject: [PATCH 082/125] net: pcs: lynxi: implement pcs_disable op
-
-When switching from 10GBase-R/5GBase-R/USXGMII to one of the interface
-modes provided by mtk-pcs-lynxi we need to make sure to always perform
-a full configuration of the PHYA.
-
-Implement pcs_disable op which resets the stored interface mode to
-PHY_INTERFACE_MODE_NA to trigger a full reconfiguration once the LynxI
-PCS driver had previously been deselected in favor of another PCS
-driver such as the to-be-added driver for the USXGMII PCS found in
-MT7988.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/f23d1a60d2c9d2fb72e32dcb0eaa5f7e867a3d68.1692327891.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/pcs/pcs-mtk-lynxi.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/net/pcs/pcs-mtk-lynxi.c
-+++ b/drivers/net/pcs/pcs-mtk-lynxi.c
-@@ -234,11 +234,19 @@ static void mtk_pcs_lynxi_link_up(struct
- 	}
- }
- 
-+static void mtk_pcs_lynxi_disable(struct phylink_pcs *pcs)
-+{
-+	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
-+
-+	mpcs->interface = PHY_INTERFACE_MODE_NA;
-+}
-+
- static const struct phylink_pcs_ops mtk_pcs_lynxi_ops = {
- 	.pcs_get_state = mtk_pcs_lynxi_get_state,
- 	.pcs_config = mtk_pcs_lynxi_config,
- 	.pcs_an_restart = mtk_pcs_lynxi_restart_an,
- 	.pcs_link_up = mtk_pcs_lynxi_link_up,
-+	.pcs_disable = mtk_pcs_lynxi_disable,
- };
- 
- struct phylink_pcs *mtk_pcs_lynxi_create(struct device *dev,
diff --git a/target/linux/generic/backport-6.1/794-v6.2-net-core-Allow-live-renaming-when-an-interface-is-up.patch b/target/linux/generic/backport-6.1/794-v6.2-net-core-Allow-live-renaming-when-an-interface-is-up.patch
deleted file mode 100644
index c4141eee933f..000000000000
--- a/target/linux/generic/backport-6.1/794-v6.2-net-core-Allow-live-renaming-when-an-interface-is-up.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From: Andy Ren <andy.ren@getcruise.com>
-Date: Mon, 7 Nov 2022 09:42:42 -0800
-Subject: [PATCH] net/core: Allow live renaming when an interface is up
-
-Allow a network interface to be renamed when the interface
-is up.
-
-As described in the netconsole documentation [1], when netconsole is
-used as a built-in, it will bring up the specified interface as soon as
-possible. As a result, user space will not be able to rename the
-interface since the kernel disallows renaming of interfaces that are
-administratively up unless the 'IFF_LIVE_RENAME_OK' private flag was set
-by the kernel.
-
-The original solution [2] to this problem was to add a new parameter to
-the netconsole configuration parameters that allows renaming of
-the interface used by netconsole while it is administratively up.
-However, during the discussion that followed, it became apparent that we
-have no reason to keep the current restriction and instead we should
-allow user space to rename interfaces regardless of their administrative
-state:
-
-1. The restriction was put in place over 20 years ago when renaming was
-only possible via IOCTL and before rtnetlink started notifying user
-space about such changes like it does today.
-
-2. The 'IFF_LIVE_RENAME_OK' flag was added over 3 years ago in version
-5.2 and no regressions were reported.
-
-3. In-kernel listeners to 'NETDEV_CHANGENAME' do not seem to care about
-the administrative state of interface.
-
-Therefore, allow user space to rename running interfaces by removing the
-restriction and the associated 'IFF_LIVE_RENAME_OK' flag. Help in
-possible triage by emitting a message to the kernel log that an
-interface was renamed while UP.
-
-[1] https://www.kernel.org/doc/Documentation/networking/netconsole.rst
-[2] https://lore.kernel.org/netdev/20221102002420.2613004-1-andy.ren@getcruise.com/
-
-Signed-off-by: Andy Ren <andy.ren@getcruise.com>
-Reviewed-by: Ido Schimmel <idosch@nvidia.com>
-Reviewed-by: David Ahern <dsahern@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1691,7 +1691,6 @@ struct net_device_ops {
-  * @IFF_FAILOVER: device is a failover master device
-  * @IFF_FAILOVER_SLAVE: device is lower dev of a failover master device
-  * @IFF_L3MDEV_RX_HANDLER: only invoke the rx handler of L3 master device
-- * @IFF_LIVE_RENAME_OK: rename is allowed while device is up and running
-  * @IFF_TX_SKB_NO_LINEAR: device/driver is capable of xmitting frames with
-  *	skb_headlen(skb) == 0 (data starts from frag0)
-  * @IFF_CHANGE_PROTO_DOWN: device supports setting carrier via IFLA_PROTO_DOWN
-@@ -1727,7 +1726,7 @@ enum netdev_priv_flags {
- 	IFF_FAILOVER			= 1<<27,
- 	IFF_FAILOVER_SLAVE		= 1<<28,
- 	IFF_L3MDEV_RX_HANDLER		= 1<<29,
--	IFF_LIVE_RENAME_OK		= 1<<30,
-+	/* was IFF_LIVE_RENAME_OK */
- 	IFF_TX_SKB_NO_LINEAR		= BIT_ULL(31),
- 	IFF_CHANGE_PROTO_DOWN		= BIT_ULL(32),
- };
-@@ -1762,7 +1761,6 @@ enum netdev_priv_flags {
- #define IFF_FAILOVER			IFF_FAILOVER
- #define IFF_FAILOVER_SLAVE		IFF_FAILOVER_SLAVE
- #define IFF_L3MDEV_RX_HANDLER		IFF_L3MDEV_RX_HANDLER
--#define IFF_LIVE_RENAME_OK		IFF_LIVE_RENAME_OK
- #define IFF_TX_SKB_NO_LINEAR		IFF_TX_SKB_NO_LINEAR
- 
- /* Specifies the type of the struct net_device::ml_priv pointer */
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -1188,22 +1188,6 @@ int dev_change_name(struct net_device *d
- 
- 	net = dev_net(dev);
- 
--	/* Some auto-enslaved devices e.g. failover slaves are
--	 * special, as userspace might rename the device after
--	 * the interface had been brought up and running since
--	 * the point kernel initiated auto-enslavement. Allow
--	 * live name change even when these slave devices are
--	 * up and running.
--	 *
--	 * Typically, users of these auto-enslaving devices
--	 * don't actually care about slave name change, as
--	 * they are supposed to operate on master interface
--	 * directly.
--	 */
--	if (dev->flags & IFF_UP &&
--	    likely(!(dev->priv_flags & IFF_LIVE_RENAME_OK)))
--		return -EBUSY;
--
- 	down_write(&devnet_rename_sem);
- 
- 	if (strncmp(newname, dev->name, IFNAMSIZ) == 0) {
-@@ -1220,7 +1204,8 @@ int dev_change_name(struct net_device *d
- 	}
- 
- 	if (oldname[0] && !strchr(oldname, '%'))
--		netdev_info(dev, "renamed from %s\n", oldname);
-+		netdev_info(dev, "renamed from %s%s\n", oldname,
-+			    dev->flags & IFF_UP ? " (while UP)" : "");
- 
- 	old_assign_type = dev->name_assign_type;
- 	dev->name_assign_type = NET_NAME_RENAMED;
---- a/net/core/failover.c
-+++ b/net/core/failover.c
-@@ -80,14 +80,14 @@ static int failover_slave_register(struc
- 		goto err_upper_link;
- 	}
- 
--	slave_dev->priv_flags |= (IFF_FAILOVER_SLAVE | IFF_LIVE_RENAME_OK);
-+	slave_dev->priv_flags |= IFF_FAILOVER_SLAVE;
- 
- 	if (fops && fops->slave_register &&
- 	    !fops->slave_register(slave_dev, failover_dev))
- 		return NOTIFY_OK;
- 
- 	netdev_upper_dev_unlink(slave_dev, failover_dev);
--	slave_dev->priv_flags &= ~(IFF_FAILOVER_SLAVE | IFF_LIVE_RENAME_OK);
-+	slave_dev->priv_flags &= ~IFF_FAILOVER_SLAVE;
- err_upper_link:
- 	netdev_rx_handler_unregister(slave_dev);
- done:
-@@ -121,7 +121,7 @@ int failover_slave_unregister(struct net
- 
- 	netdev_rx_handler_unregister(slave_dev);
- 	netdev_upper_dev_unlink(slave_dev, failover_dev);
--	slave_dev->priv_flags &= ~(IFF_FAILOVER_SLAVE | IFF_LIVE_RENAME_OK);
-+	slave_dev->priv_flags &= ~IFF_FAILOVER_SLAVE;
- 
- 	if (fops && fops->slave_unregister &&
- 	    !fops->slave_unregister(slave_dev, failover_dev))
diff --git a/target/linux/generic/backport-6.1/795-v6.3-02-cdc_ether-no-need-to-blacklist-any-r8152-devices.patch b/target/linux/generic/backport-6.1/795-v6.3-02-cdc_ether-no-need-to-blacklist-any-r8152-devices.patch
deleted file mode 100644
index 17131c16d39f..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.3-02-cdc_ether-no-need-to-blacklist-any-r8152-devices.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From 69649ef8405320f81497f4757faac8234f61b167 Mon Sep 17 00:00:00 2001
-From: Bjørn Mork <bjorn@mork.no>
-Date: Fri, 6 Jan 2023 17:07:39 +0100
-Subject: [PATCH] cdc_ether: no need to blacklist any r8152 devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The r8152 driver does not need this anymore.
-
-Dropping blacklist entries adds optional support for these
-devices in ECM mode.
-
-The 8153 devices are handled by the r8153_ecm driver when
-in ECM mode, and must still be blacklisted here.
-
-Signed-off-by: Bjørn Mork <bjorn@mork.no>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/cdc_ether.c | 114 ------------------------------------
- 1 file changed, 114 deletions(-)
-
---- a/drivers/net/usb/cdc_ether.c
-+++ b/drivers/net/usb/cdc_ether.c
-@@ -768,13 +768,6 @@ static const struct usb_device_id	produc
- 	.driver_info = 0,
- },
- 
--/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
- /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
- {
- 	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
-@@ -782,119 +775,12 @@ static const struct usb_device_id	produc
- 	.driver_info = 0,
- },
- 
--/* Samsung USB Ethernet Adapters */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--#if IS_ENABLED(CONFIG_USB_RTL8152)
--/* Linksys USB3GIGV1 Ethernet Adapter */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(LINKSYS_VENDOR_ID, 0x0041, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--#endif
--
--/* Lenovo ThinkPad OneLink+ Dock (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3054, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* ThinkPad USB-C Dock (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3062, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* ThinkPad Thunderbolt 3 Dock (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3069, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* ThinkPad Thunderbolt 3 Dock Gen 2 (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3082, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* Lenovo USB C to Ethernet Adapter (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x720c, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* Lenovo USB-C Travel Hub (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7214, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
- /* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */
- {
- 	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x721e, USB_CLASS_COMM,
- 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
- 	.driver_info = 0,
- },
--
--/* ThinkPad USB-C Dock Gen 2 (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0xa387, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* Microsoft Surface 2 dock (based on Realtek RTL8152) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07ab, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153B) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x0927, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
--
--/* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
--{
--	USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, 0x0601, USB_CLASS_COMM,
--			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
--	.driver_info = 0,
--},
- 
- /* Aquantia AQtion USB to 5GbE Controller (based on AQC111U) */
- {
diff --git a/target/linux/generic/backport-6.1/795-v6.3-05-r8152-reduce-the-control-transfer-of-rtl8152_get_ver.patch b/target/linux/generic/backport-6.1/795-v6.3-05-r8152-reduce-the-control-transfer-of-rtl8152_get_ver.patch
deleted file mode 100644
index 565fbb3074f9..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.3-05-r8152-reduce-the-control-transfer-of-rtl8152_get_ver.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 02767440e1dda9861a11ca1dbe0f19a760b1d5c2 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Thu, 19 Jan 2023 15:40:43 +0800
-Subject: [PATCH] r8152: reduce the control transfer of rtl8152_get_version()
-
-Reduce the control transfer by moving calling rtl8152_get_version() in
-rtl8152_probe(). This could prevent from calling rtl8152_get_version()
-for unnecessary situations. For example, after setting config #2 for the
-device, there are two interfaces and rtl8152_probe() may be called
-twice. However, we don't need to call rtl8152_get_version() for this
-situation.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 9 +++++----
- 1 file changed, 5 insertions(+), 4 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -9638,20 +9638,21 @@ static int rtl8152_probe(struct usb_inte
- 			 const struct usb_device_id *id)
- {
- 	struct usb_device *udev = interface_to_usbdev(intf);
--	u8 version = rtl8152_get_version(intf);
- 	struct r8152 *tp;
- 	struct net_device *netdev;
-+	u8 version;
- 	int ret;
- 
--	if (version == RTL_VER_UNKNOWN)
--		return -ENODEV;
--
- 	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
- 		return -ENODEV;
- 
- 	if (!rtl_check_vendor_ok(intf))
- 		return -ENODEV;
- 
-+	version = rtl8152_get_version(intf);
-+	if (version == RTL_VER_UNKNOWN)
-+		return -ENODEV;
-+
- 	usb_reset_device(udev);
- 	netdev = alloc_etherdev(sizeof(struct r8152));
- 	if (!netdev) {
diff --git a/target/linux/generic/backport-6.1/795-v6.3-06-r8152-Add-__GFP_NOWARN-to-big-allocations.patch b/target/linux/generic/backport-6.1/795-v6.3-06-r8152-Add-__GFP_NOWARN-to-big-allocations.patch
deleted file mode 100644
index cdabca36d2a8..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.3-06-r8152-Add-__GFP_NOWARN-to-big-allocations.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 5cc33f139e11b893ff6dc60d8a0ae865a65521ac Mon Sep 17 00:00:00 2001
-From: Douglas Anderson <dianders@chromium.org>
-Date: Thu, 6 Apr 2023 17:14:26 -0700
-Subject: [PATCH] r8152: Add __GFP_NOWARN to big allocations
-
-When memory is a little tight on my system, it's pretty easy to see
-warnings that look like this.
-
-  ksoftirqd/0: page allocation failure: order:3, mode:0x40a20(GFP_ATOMIC|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
-  ...
-  Call trace:
-   dump_backtrace+0x0/0x1e8
-   show_stack+0x20/0x2c
-   dump_stack_lvl+0x60/0x78
-   dump_stack+0x18/0x38
-   warn_alloc+0x104/0x174
-   __alloc_pages+0x588/0x67c
-   alloc_rx_agg+0xa0/0x190 [r8152 ...]
-   r8152_poll+0x270/0x760 [r8152 ...]
-   __napi_poll+0x44/0x1ec
-   net_rx_action+0x100/0x300
-   __do_softirq+0xec/0x38c
-   run_ksoftirqd+0x38/0xec
-   smpboot_thread_fn+0xb8/0x248
-   kthread+0x134/0x154
-   ret_from_fork+0x10/0x20
-
-On a fragmented system it's normal that order 3 allocations will
-sometimes fail, especially atomic ones. The driver handles these
-failures fine and the WARN just creates spam in the logs for this
-case. The __GFP_NOWARN flag is exactly for this situation, so add it
-to the allocation.
-
-NOTE: my testing is on a 5.15 system, but there should be no reason
-that this would be fundamentally different on a mainline kernel.
-
-Signed-off-by: Douglas Anderson <dianders@chromium.org>
-Acked-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20230406171411.1.I84dbef45786af440fd269b71e9436a96a8e7a152@changeid
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -1947,7 +1947,7 @@ static struct rx_agg *alloc_rx_agg(struc
- 	if (!rx_agg)
- 		return NULL;
- 
--	rx_agg->page = alloc_pages(mflags | __GFP_COMP, order);
-+	rx_agg->page = alloc_pages(mflags | __GFP_COMP | __GFP_NOWARN, order);
- 	if (!rx_agg->page)
- 		goto free_rx;
- 
diff --git a/target/linux/generic/backport-6.1/795-v6.6-08-r8152-adjust-generic_ocp_write-function.patch b/target/linux/generic/backport-6.1/795-v6.6-08-r8152-adjust-generic_ocp_write-function.patch
deleted file mode 100644
index 3ba79d6cc6a3..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.6-08-r8152-adjust-generic_ocp_write-function.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 57df0fb9d511f91202114813e90128d65c0589f0 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Wed, 26 Jul 2023 11:08:07 +0800
-Subject: [PATCH] r8152: adjust generic_ocp_write function
-
-Reduce the control transfer if all bytes of first or the last DWORD are
-written.
-
-The original method is to split the control transfer into three parts
-(the first DWORD, middle continuous data, and the last DWORD). However,
-they could be combined if whole bytes of the first DWORD or last DWORD
-are written. That is, the first DWORD or the last DWORD could be combined
-with the middle continuous data, if the byte_en is 0xff.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20230726030808.9093-418-nic_swsd@realtek.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 29 ++++++++++++++++++-----------
- 1 file changed, 18 insertions(+), 11 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -1313,16 +1313,24 @@ static int generic_ocp_write(struct r815
- 	byteen_end = byteen & BYTE_EN_END_MASK;
- 
- 	byen = byteen_start | (byteen_start << 4);
--	ret = set_registers(tp, index, type | byen, 4, data);
--	if (ret < 0)
--		goto error1;
--
--	index += 4;
--	data += 4;
--	size -= 4;
- 
--	if (size) {
-+	/* Split the first DWORD if the byte_en is not 0xff */
-+	if (byen != BYTE_EN_DWORD) {
-+		ret = set_registers(tp, index, type | byen, 4, data);
-+		if (ret < 0)
-+			goto error1;
-+
-+		index += 4;
-+		data += 4;
- 		size -= 4;
-+	}
-+
-+	if (size) {
-+		byen = byteen_end | (byteen_end >> 4);
-+
-+		/* Split the last DWORD if the byte_en is not 0xff */
-+		if (byen != BYTE_EN_DWORD)
-+			size -= 4;
- 
- 		while (size) {
- 			if (size > limit) {
-@@ -1349,10 +1357,9 @@ static int generic_ocp_write(struct r815
- 			}
- 		}
- 
--		byen = byteen_end | (byteen_end >> 4);
--		ret = set_registers(tp, index, type | byen, 4, data);
--		if (ret < 0)
--			goto error1;
-+		/* Set the last DWORD */
-+		if (byen != BYTE_EN_DWORD)
-+			ret = set_registers(tp, index, type | byen, 4, data);
- 	}
- 
- error1:
diff --git a/target/linux/generic/backport-6.1/795-v6.6-09-r8152-set-bp-in-bulk.patch b/target/linux/generic/backport-6.1/795-v6.6-09-r8152-set-bp-in-bulk.patch
deleted file mode 100644
index bc70c5af02c7..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.6-09-r8152-set-bp-in-bulk.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From e5c266a61186b462c388c53a3564c375e72f2244 Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Wed, 26 Jul 2023 11:08:08 +0800
-Subject: [PATCH] r8152: set bp in bulk
-
-PLA_BP_0 ~ PLA_BP_15 (0xfc28 ~ 0xfc46) are continuous registers, so we
-could combine the control transfers into one control transfer.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20230726030808.9093-419-nic_swsd@realtek.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 75 ++++++++++++++---------------------------
- 1 file changed, 25 insertions(+), 50 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -3990,29 +3990,10 @@ static void rtl_reset_bmu(struct r8152 *
- /* Clear the bp to stop the firmware before loading a new one */
- static void rtl_clear_bp(struct r8152 *tp, u16 type)
- {
--	switch (tp->version) {
--	case RTL_VER_01:
--	case RTL_VER_02:
--	case RTL_VER_07:
--		break;
--	case RTL_VER_03:
--	case RTL_VER_04:
--	case RTL_VER_05:
--	case RTL_VER_06:
--		ocp_write_byte(tp, type, PLA_BP_EN, 0);
--		break;
--	case RTL_VER_14:
--		ocp_write_word(tp, type, USB_BP2_EN, 0);
-+	u16 bp[16] = {0};
-+	u16 bp_num;
- 
--		ocp_write_word(tp, type, USB_BP_8, 0);
--		ocp_write_word(tp, type, USB_BP_9, 0);
--		ocp_write_word(tp, type, USB_BP_10, 0);
--		ocp_write_word(tp, type, USB_BP_11, 0);
--		ocp_write_word(tp, type, USB_BP_12, 0);
--		ocp_write_word(tp, type, USB_BP_13, 0);
--		ocp_write_word(tp, type, USB_BP_14, 0);
--		ocp_write_word(tp, type, USB_BP_15, 0);
--		break;
-+	switch (tp->version) {
- 	case RTL_VER_08:
- 	case RTL_VER_09:
- 	case RTL_VER_10:
-@@ -4020,32 +4001,31 @@ static void rtl_clear_bp(struct r8152 *t
- 	case RTL_VER_12:
- 	case RTL_VER_13:
- 	case RTL_VER_15:
--	default:
- 		if (type == MCU_TYPE_USB) {
- 			ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
--
--			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
--			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
--			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0);
--			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0);
--			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0);
--			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0);
--			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0);
--			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0);
--		} else {
--			ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
-+			bp_num = 16;
-+			break;
- 		}
-+		fallthrough;
-+	case RTL_VER_03:
-+	case RTL_VER_04:
-+	case RTL_VER_05:
-+	case RTL_VER_06:
-+		ocp_write_byte(tp, type, PLA_BP_EN, 0);
-+		fallthrough;
-+	case RTL_VER_01:
-+	case RTL_VER_02:
-+	case RTL_VER_07:
-+		bp_num = 8;
-+		break;
-+	case RTL_VER_14:
-+	default:
-+		ocp_write_word(tp, type, USB_BP2_EN, 0);
-+		bp_num = 16;
- 		break;
- 	}
- 
--	ocp_write_word(tp, type, PLA_BP_0, 0);
--	ocp_write_word(tp, type, PLA_BP_1, 0);
--	ocp_write_word(tp, type, PLA_BP_2, 0);
--	ocp_write_word(tp, type, PLA_BP_3, 0);
--	ocp_write_word(tp, type, PLA_BP_4, 0);
--	ocp_write_word(tp, type, PLA_BP_5, 0);
--	ocp_write_word(tp, type, PLA_BP_6, 0);
--	ocp_write_word(tp, type, PLA_BP_7, 0);
-+	generic_ocp_write(tp, PLA_BP_0, BYTE_EN_DWORD, bp_num << 1, bp, type);
- 
- 	/* wait 3 ms to make sure the firmware is stopped */
- 	usleep_range(3000, 6000);
-@@ -5022,10 +5002,9 @@ static void rtl8152_fw_phy_nc_apply(stru
- 
- static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
- {
--	u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg;
-+	u16 bp_en_addr, type, fw_ver_reg;
- 	u32 length;
- 	u8 *data;
--	int i;
- 
- 	switch (__le32_to_cpu(mac->blk_hdr.type)) {
- 	case RTL_FW_PLA:
-@@ -5067,12 +5046,8 @@ static void rtl8152_fw_mac_apply(struct
- 	ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr),
- 		       __le16_to_cpu(mac->bp_ba_value));
- 
--	bp_index = __le16_to_cpu(mac->bp_start);
--	bp_num = __le16_to_cpu(mac->bp_num);
--	for (i = 0; i < bp_num; i++) {
--		ocp_write_word(tp, type, bp_index, __le16_to_cpu(mac->bp[i]));
--		bp_index += 2;
--	}
-+	generic_ocp_write(tp, __le16_to_cpu(mac->bp_start), BYTE_EN_DWORD,
-+			  __le16_to_cpu(mac->bp_num) << 1, mac->bp, type);
- 
- 	bp_en_addr = __le16_to_cpu(mac->bp_en_addr);
- 	if (bp_en_addr)
diff --git a/target/linux/generic/backport-6.1/795-v6.6-10-eth-r8152-try-to-use-a-normal-budget.patch b/target/linux/generic/backport-6.1/795-v6.6-10-eth-r8152-try-to-use-a-normal-budget.patch
deleted file mode 100644
index d7fdcdb2c630..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.6-10-eth-r8152-try-to-use-a-normal-budget.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From cf74eb5a5bc867258e7d0b0d1c3c4a60e1e3de2f Mon Sep 17 00:00:00 2001
-From: Jakub Kicinski <kuba@kernel.org>
-Date: Mon, 14 Aug 2023 08:35:21 -0700
-Subject: [PATCH] eth: r8152: try to use a normal budget
-
-Mario reports that loading r8152 on his system leads to a:
-
-  netif_napi_add_weight() called with weight 256
-
-warning getting printed. We don't have any solid data
-on why such high budget was chosen, and it may cause
-stalls in processing other softirqs and rt threads.
-So try to switch back to the default (64) weight.
-
-If this slows down someone's system we should investigate
-which part of stopping starting the NAPI poll in this
-driver are expensive.
-
-Reported-by: Mario Limonciello <mario.limonciello@amd.com>
-Link: https://lore.kernel.org/all/0bfd445a-81f7-f702-08b0-bd5a72095e49@amd.com/
-Acked-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20230814153521.2697982-1-kuba@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -9784,8 +9784,7 @@ static int rtl8152_probe(struct usb_inte
- 
- 	usb_set_intfdata(intf, tp);
- 
--	netif_napi_add_weight(netdev, &tp->napi, r8152_poll,
--			      tp->support_2500full ? 256 : 64);
-+	netif_napi_add(netdev, &tp->napi, r8152_poll);
- 
- 	ret = register_netdev(netdev);
- 	if (ret != 0) {
diff --git a/target/linux/generic/backport-6.1/795-v6.6-13-r8152-Block-future-register-access-if-register-acces.patch b/target/linux/generic/backport-6.1/795-v6.6-13-r8152-Block-future-register-access-if-register-acces.patch
deleted file mode 100644
index 8901767be523..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.6-13-r8152-Block-future-register-access-if-register-acces.patch
+++ /dev/null
@@ -1,398 +0,0 @@
-From d9962b0d42029bcb40fe3c38bce06d1870fa4df4 Mon Sep 17 00:00:00 2001
-From: Douglas Anderson <dianders@chromium.org>
-Date: Fri, 20 Oct 2023 14:06:59 -0700
-Subject: [PATCH] r8152: Block future register access if register access fails
-
-Even though the functions to read/write registers can fail, most of
-the places in the r8152 driver that read/write register values don't
-check error codes. The lack of error code checking is problematic in
-at least two ways.
-
-The first problem is that the r8152 driver often uses code patterns
-similar to this:
-  x = read_register()
-  x = x | SOME_BIT;
-  write_register(x);
-
-...with the above pattern, if the read_register() fails and returns
-garbage then we'll end up trying to write modified garbage back to the
-Realtek adapter. If the write_register() succeeds that's bad. Note
-that as of commit f53a7ad18959 ("r8152: Set memory to all 0xFFs on
-failed reg reads") the "garbage" returned by read_register() will at
-least be consistent garbage, but it is still garbage.
-
-It turns out that this problem is very serious. Writing garbage to
-some of the hardware registers on the Ethernet adapter can put the
-adapter in such a bad state that it needs to be power cycled (fully
-unplugged and plugged in again) before it can enumerate again.
-
-The second problem is that the r8152 driver generally has functions
-that are long sequences of register writes. Assuming everything will
-be OK if a random register write fails in the middle isn't a great
-assumption.
-
-One might wonder if the above two problems are real. You could ask if
-we would really have a successful write after a failed read. It turns
-out that the answer appears to be "yes, this can happen". In fact,
-we've seen at least two distinct failure modes where this happens.
-
-On a sc7180-trogdor Chromebook if you drop into kdb for a while and
-then resume, you can see:
-1. We get a "Tx timeout"
-2. The "Tx timeout" queues up a USB reset.
-3. In rtl8152_pre_reset() we try to reinit the hardware.
-4. The first several (2-9) register accesses fail with a timeout, then
-   things recover.
-
-The above test case was actually fixed by the patch ("r8152: Increase
-USB control msg timeout to 5000ms as per spec") but at least shows
-that we really can see successful calls after failed ones.
-
-On a different (AMD) based Chromebook with a particular adapter, we
-found that during reboot tests we'd also sometimes get a transitory
-failure. In this case we saw -EPIPE being returned sometimes. Retrying
-worked, but retrying is not always safe for all register accesses
-since reading/writing some registers might have side effects (like
-registers that clear on read).
-
-Let's fully lock out all register access if a register access fails.
-When we do this, we'll try to queue up a USB reset and try to unlock
-register access after the reset. This is slightly tricker than it
-sounds since the r8152 driver has an optimized reset sequence that
-only works reliably after probe happens. In order to handle this, we
-avoid the optimized reset if probe didn't finish. Instead, we simply
-retry the probe routine in this case.
-
-When locking out access, we'll use the existing infrastructure that
-the driver was using when it detected we were unplugged. This keeps us
-from getting stuck in delay loops in some parts of the driver.
-
-Signed-off-by: Douglas Anderson <dianders@chromium.org>
-Reviewed-by: Grant Grundler <grundler@chromium.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/r8152.c | 207 ++++++++++++++++++++++++++++++++++------
- 1 file changed, 176 insertions(+), 31 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -772,6 +772,9 @@ enum rtl8152_flags {
- 	SCHEDULE_TASKLET,
- 	GREEN_ETHERNET,
- 	RX_EPROTO,
-+	IN_PRE_RESET,
-+	PROBED_WITH_NO_ERRORS,
-+	PROBE_SHOULD_RETRY,
- };
- 
- #define DEVICE_ID_LENOVO_USB_C_TRAVEL_HUB		0x721e
-@@ -952,6 +955,8 @@ struct r8152 {
- 	u8 version;
- 	u8 duplex;
- 	u8 autoneg;
-+
-+	unsigned int reg_access_reset_count;
- };
- 
- /**
-@@ -1199,6 +1204,96 @@ static unsigned int agg_buf_sz = 16384;
- 
- #define RTL_LIMITED_TSO_SIZE	(size_to_mtu(agg_buf_sz) - sizeof(struct tx_desc))
- 
-+/* If register access fails then we block access and issue a reset. If this
-+ * happens too many times in a row without a successful access then we stop
-+ * trying to reset and just leave access blocked.
-+ */
-+#define REGISTER_ACCESS_MAX_RESETS	3
-+
-+static void rtl_set_inaccessible(struct r8152 *tp)
-+{
-+	set_bit(RTL8152_INACCESSIBLE, &tp->flags);
-+	smp_mb__after_atomic();
-+}
-+
-+static void rtl_set_accessible(struct r8152 *tp)
-+{
-+	clear_bit(RTL8152_INACCESSIBLE, &tp->flags);
-+	smp_mb__after_atomic();
-+}
-+
-+static
-+int r8152_control_msg(struct r8152 *tp, unsigned int pipe, __u8 request,
-+		      __u8 requesttype, __u16 value, __u16 index, void *data,
-+		      __u16 size, const char *msg_tag)
-+{
-+	struct usb_device *udev = tp->udev;
-+	int ret;
-+
-+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
-+		return -ENODEV;
-+
-+	ret = usb_control_msg(udev, pipe, request, requesttype,
-+			      value, index, data, size,
-+			      USB_CTRL_GET_TIMEOUT);
-+
-+	/* No need to issue a reset to report an error if the USB device got
-+	 * unplugged; just return immediately.
-+	 */
-+	if (ret == -ENODEV)
-+		return ret;
-+
-+	/* If the write was successful then we're done */
-+	if (ret >= 0) {
-+		tp->reg_access_reset_count = 0;
-+		return ret;
-+	}
-+
-+	dev_err(&udev->dev,
-+		"Failed to %s %d bytes at %#06x/%#06x (%d)\n",
-+		msg_tag, size, value, index, ret);
-+
-+	/* Block all future register access until we reset. Much of the code
-+	 * in the driver doesn't check for errors. Notably, many parts of the
-+	 * driver do a read/modify/write of a register value without
-+	 * confirming that the read succeeded. Writing back modified garbage
-+	 * like this can fully wedge the adapter, requiring a power cycle.
-+	 */
-+	rtl_set_inaccessible(tp);
-+
-+	/* If probe hasn't yet finished, then we'll request a retry of the
-+	 * whole probe routine if we get any control transfer errors. We
-+	 * never have to clear this bit since we free/reallocate the whole "tp"
-+	 * structure if we retry probe.
-+	 */
-+	if (!test_bit(PROBED_WITH_NO_ERRORS, &tp->flags)) {
-+		set_bit(PROBE_SHOULD_RETRY, &tp->flags);
-+		return ret;
-+	}
-+
-+	/* Failing to access registers in pre-reset is not surprising since we
-+	 * wouldn't be resetting if things were behaving normally. The register
-+	 * access we do in pre-reset isn't truly mandatory--we're just reusing
-+	 * the disable() function and trying to be nice by powering the
-+	 * adapter down before resetting it. Thus, if we're in pre-reset,
-+	 * we'll return right away and not try to queue up yet another reset.
-+	 * We know the post-reset is already coming.
-+	 */
-+	if (test_bit(IN_PRE_RESET, &tp->flags))
-+		return ret;
-+
-+	if (tp->reg_access_reset_count < REGISTER_ACCESS_MAX_RESETS) {
-+		usb_queue_reset_device(tp->intf);
-+		tp->reg_access_reset_count++;
-+	} else if (tp->reg_access_reset_count == REGISTER_ACCESS_MAX_RESETS) {
-+		dev_err(&udev->dev,
-+			"Tried to reset %d times; giving up.\n",
-+			REGISTER_ACCESS_MAX_RESETS);
-+	}
-+
-+	return ret;
-+}
-+
- static
- int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
- {
-@@ -1209,9 +1304,10 @@ int get_registers(struct r8152 *tp, u16
- 	if (!tmp)
- 		return -ENOMEM;
- 
--	ret = usb_control_msg(tp->udev, tp->pipe_ctrl_in,
--			      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
--			      value, index, tmp, size, USB_CTRL_GET_TIMEOUT);
-+	ret = r8152_control_msg(tp, tp->pipe_ctrl_in,
-+				RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
-+				value, index, tmp, size, "read");
-+
- 	if (ret < 0)
- 		memset(data, 0xff, size);
- 	else
-@@ -1232,9 +1328,9 @@ int set_registers(struct r8152 *tp, u16
- 	if (!tmp)
- 		return -ENOMEM;
- 
--	ret = usb_control_msg(tp->udev, tp->pipe_ctrl_out,
--			      RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
--			      value, index, tmp, size, USB_CTRL_SET_TIMEOUT);
-+	ret = r8152_control_msg(tp, tp->pipe_ctrl_out,
-+				RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
-+				value, index, tmp, size, "write");
- 
- 	kfree(tmp);
- 
-@@ -1243,10 +1339,8 @@ int set_registers(struct r8152 *tp, u16
- 
- static void rtl_set_unplug(struct r8152 *tp)
- {
--	if (tp->udev->state == USB_STATE_NOTATTACHED) {
--		set_bit(RTL8152_INACCESSIBLE, &tp->flags);
--		smp_mb__after_atomic();
--	}
-+	if (tp->udev->state == USB_STATE_NOTATTACHED)
-+		rtl_set_inaccessible(tp);
- }
- 
- static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
-@@ -8275,7 +8369,7 @@ static int rtl8152_pre_reset(struct usb_
- 	struct r8152 *tp = usb_get_intfdata(intf);
- 	struct net_device *netdev;
- 
--	if (!tp)
-+	if (!tp || !test_bit(PROBED_WITH_NO_ERRORS, &tp->flags))
- 		return 0;
- 
- 	netdev = tp->netdev;
-@@ -8290,7 +8384,9 @@ static int rtl8152_pre_reset(struct usb_
- 	napi_disable(&tp->napi);
- 	if (netif_carrier_ok(netdev)) {
- 		mutex_lock(&tp->control);
-+		set_bit(IN_PRE_RESET, &tp->flags);
- 		tp->rtl_ops.disable(tp);
-+		clear_bit(IN_PRE_RESET, &tp->flags);
- 		mutex_unlock(&tp->control);
- 	}
- 
-@@ -8303,9 +8399,11 @@ static int rtl8152_post_reset(struct usb
- 	struct net_device *netdev;
- 	struct sockaddr sa;
- 
--	if (!tp)
-+	if (!tp || !test_bit(PROBED_WITH_NO_ERRORS, &tp->flags))
- 		return 0;
- 
-+	rtl_set_accessible(tp);
-+
- 	/* reset the MAC address in case of policy change */
- 	if (determine_ethernet_addr(tp, &sa) >= 0) {
- 		rtnl_lock();
-@@ -9507,17 +9605,29 @@ static u8 __rtl_get_hw_ver(struct usb_de
- 	__le32 *tmp;
- 	u8 version;
- 	int ret;
-+	int i;
- 
- 	tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
- 	if (!tmp)
- 		return 0;
- 
--	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
--			      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
--			      PLA_TCR0, MCU_TYPE_PLA, tmp, sizeof(*tmp),
--			      USB_CTRL_GET_TIMEOUT);
--	if (ret > 0)
--		ocp_data = (__le32_to_cpu(*tmp) >> 16) & VERSION_MASK;
-+	/* Retry up to 3 times in case there is a transitory error. We do this
-+	 * since retrying a read of the version is always safe and this
-+	 * function doesn't take advantage of r8152_control_msg().
-+	 */
-+	for (i = 0; i < 3; i++) {
-+		ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-+				      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
-+				      PLA_TCR0, MCU_TYPE_PLA, tmp, sizeof(*tmp),
-+				      USB_CTRL_GET_TIMEOUT);
-+		if (ret > 0) {
-+			ocp_data = (__le32_to_cpu(*tmp) >> 16) & VERSION_MASK;
-+			break;
-+		}
-+	}
-+
-+	if (i != 0 && ret > 0)
-+		dev_warn(&udev->dev, "Needed %d retries to read version\n", i);
- 
- 	kfree(tmp);
- 
-@@ -9616,25 +9726,14 @@ static bool rtl8152_supports_lenovo_macp
- 	return 0;
- }
- 
--static int rtl8152_probe(struct usb_interface *intf,
--			 const struct usb_device_id *id)
-+static int rtl8152_probe_once(struct usb_interface *intf,
-+			      const struct usb_device_id *id, u8 version)
- {
- 	struct usb_device *udev = interface_to_usbdev(intf);
- 	struct r8152 *tp;
- 	struct net_device *netdev;
--	u8 version;
- 	int ret;
- 
--	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
--		return -ENODEV;
--
--	if (!rtl_check_vendor_ok(intf))
--		return -ENODEV;
--
--	version = rtl8152_get_version(intf);
--	if (version == RTL_VER_UNKNOWN)
--		return -ENODEV;
--
- 	usb_reset_device(udev);
- 	netdev = alloc_etherdev(sizeof(struct r8152));
- 	if (!netdev) {
-@@ -9797,10 +9896,20 @@ static int rtl8152_probe(struct usb_inte
- 	else
- 		device_set_wakeup_enable(&udev->dev, false);
- 
-+	/* If we saw a control transfer error while probing then we may
-+	 * want to try probe() again. Consider this an error.
-+	 */
-+	if (test_bit(PROBE_SHOULD_RETRY, &tp->flags))
-+		goto out2;
-+
-+	set_bit(PROBED_WITH_NO_ERRORS, &tp->flags);
- 	netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
- 
- 	return 0;
- 
-+out2:
-+	unregister_netdev(netdev);
-+
- out1:
- 	tasklet_kill(&tp->tx_tl);
- 	cancel_delayed_work_sync(&tp->hw_phy_work);
-@@ -9809,10 +9918,46 @@ out1:
- 	rtl8152_release_firmware(tp);
- 	usb_set_intfdata(intf, NULL);
- out:
-+	if (test_bit(PROBE_SHOULD_RETRY, &tp->flags))
-+		ret = -EAGAIN;
-+
- 	free_netdev(netdev);
- 	return ret;
- }
- 
-+#define RTL8152_PROBE_TRIES	3
-+
-+static int rtl8152_probe(struct usb_interface *intf,
-+			 const struct usb_device_id *id)
-+{
-+	u8 version;
-+	int ret;
-+	int i;
-+
-+	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
-+		return -ENODEV;
-+
-+	if (!rtl_check_vendor_ok(intf))
-+		return -ENODEV;
-+
-+	version = rtl8152_get_version(intf);
-+	if (version == RTL_VER_UNKNOWN)
-+		return -ENODEV;
-+
-+	for (i = 0; i < RTL8152_PROBE_TRIES; i++) {
-+		ret = rtl8152_probe_once(intf, id, version);
-+		if (ret != -EAGAIN)
-+			break;
-+	}
-+	if (ret == -EAGAIN) {
-+		dev_err(&intf->dev,
-+			"r8152 failed probe after %d tries; giving up\n", i);
-+		return -ENODEV;
-+	}
-+
-+	return ret;
-+}
-+
- static void rtl8152_disconnect(struct usb_interface *intf)
- {
- 	struct r8152 *tp = usb_get_intfdata(intf);
diff --git a/target/linux/generic/backport-6.1/795-v6.6-14-r8152-break-the-loop-when-the-budget-is-exhausted.patch b/target/linux/generic/backport-6.1/795-v6.6-14-r8152-break-the-loop-when-the-budget-is-exhausted.patch
deleted file mode 100644
index 7bbd1be82085..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.6-14-r8152-break-the-loop-when-the-budget-is-exhausted.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 66eee612a1ba39f9a76a9ace4a34d012044767fb Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Tue, 26 Sep 2023 19:17:13 +0800
-Subject: [PATCH] r8152: break the loop when the budget is exhausted
-
-[ Upstream commit 2cf51f931797d9a47e75d999d0993a68cbd2a560 ]
-
-A bulk transfer of the USB may contain many packets. And, the total
-number of the packets in the bulk transfer may be more than budget.
-
-Originally, only budget packets would be handled by napi_gro_receive(),
-and the other packets would be queued in the driver for next schedule.
-
-This patch would break the loop about getting next bulk transfer, when
-the budget is exhausted. That is, only the current bulk transfer would
-be handled, and the other bulk transfers would be queued for next
-schedule. Besides, the packets which are more than the budget in the
-current bulk trasnfer would be still queued in the driver, as the
-original method.
-
-In addition, a bulk transfer wouldn't contain more than 400 packets, so
-the check of queue length is unnecessary. Therefore, I replace it with
-WARN_ON_ONCE().
-
-Fixes: cf74eb5a5bc8 ("eth: r8152: try to use a normal budget")
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20230926111714.9448-433-nic_swsd@realtek.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Signed-off-by: Sasha Levin <sashal@kernel.org>
----
- drivers/net/usb/r8152.c | 18 +++++++++++++-----
- 1 file changed, 13 insertions(+), 5 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -2542,7 +2542,7 @@ static int rx_bottom(struct r8152 *tp, i
- 		}
- 	}
- 
--	if (list_empty(&tp->rx_done))
-+	if (list_empty(&tp->rx_done) || work_done >= budget)
- 		goto out1;
- 
- 	clear_bit(RX_EPROTO, &tp->flags);
-@@ -2558,6 +2558,15 @@ static int rx_bottom(struct r8152 *tp, i
- 		struct urb *urb;
- 		u8 *rx_data;
- 
-+		/* A bulk transfer of USB may contain may packets, so the
-+		 * total packets may more than the budget. Deal with all
-+		 * packets in current bulk transfer, and stop to handle the
-+		 * next bulk transfer until next schedule, if budget is
-+		 * exhausted.
-+		 */
-+		if (work_done >= budget)
-+			break;
-+
- 		list_del_init(cursor);
- 
- 		agg = list_entry(cursor, struct rx_agg, list);
-@@ -2577,9 +2586,7 @@ static int rx_bottom(struct r8152 *tp, i
- 			unsigned int pkt_len, rx_frag_head_sz;
- 			struct sk_buff *skb;
- 
--			/* limit the skb numbers for rx_queue */
--			if (unlikely(skb_queue_len(&tp->rx_queue) >= 1000))
--				break;
-+			WARN_ON_ONCE(skb_queue_len(&tp->rx_queue) >= 1000);
- 
- 			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
- 			if (pkt_len < ETH_ZLEN)
-@@ -2657,9 +2664,10 @@ submit:
- 		}
- 	}
- 
-+	/* Splice the remained list back to rx_done for next schedule */
- 	if (!list_empty(&rx_queue)) {
- 		spin_lock_irqsave(&tp->rx_lock, flags);
--		list_splice_tail(&rx_queue, &tp->rx_done);
-+		list_splice(&rx_queue, &tp->rx_done);
- 		spin_unlock_irqrestore(&tp->rx_lock, flags);
- 	}
- 
diff --git a/target/linux/generic/backport-6.1/795-v6.6-15-net-usb-cdc_ether-add-u-blox-0x1313-composition.patch b/target/linux/generic/backport-6.1/795-v6.6-15-net-usb-cdc_ether-add-u-blox-0x1313-composition.patch
deleted file mode 100644
index c858152067c9..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.6-15-net-usb-cdc_ether-add-u-blox-0x1313-composition.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 1b0fce8c8e69485e49a7d34aac3d4c2a2aa15d62 Mon Sep 17 00:00:00 2001
-From: Davide Tronchin <davide.tronchin.94@gmail.com>
-Date: Thu, 29 Jun 2023 12:37:36 +0200
-Subject: [PATCH] net: usb: cdc_ether: add u-blox 0x1313 composition.
-
-Add CDC-ECM support for LARA-R6 01B.
-
-The new LARA-R6 product variant identified by the "01B" string can be
-configured (by AT interface) in three different USB modes:
-* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
-interfaces
-* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
-interfaces and 1 RmNet virtual network interface
-* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
-interface and 1 CDC-ECM virtual network interface
-The first 4 interfaces of all the 3 configurations (default, RmNet, ECM)
-are the same.
-
-In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
-If 0: Diagnostic
-If 1: AT parser
-If 2: AT parser
-If 3: AT parset/alternative functions
-If 4: CDC-ECM interface
-
-Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/cdc_ether.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/usb/cdc_ether.c
-+++ b/drivers/net/usb/cdc_ether.c
-@@ -879,6 +879,12 @@ static const struct usb_device_id	produc
- 				      USB_CDC_PROTO_NONE),
- 	.driver_info = (unsigned long)&wwan_info,
- }, {
-+	/* U-blox LARA-R6 01B */
-+	USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1313, USB_CLASS_COMM,
-+				      USB_CDC_SUBCLASS_ETHERNET,
-+				      USB_CDC_PROTO_NONE),
-+	.driver_info = (unsigned long)&wwan_info,
-+}, {
- 	/* ZTE modules */
- 	USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, USB_CLASS_COMM,
- 				      USB_CDC_SUBCLASS_ETHERNET,
diff --git a/target/linux/generic/backport-6.1/795-v6.7-16-r8152-use-napi_gro_frags.patch b/target/linux/generic/backport-6.1/795-v6.7-16-r8152-use-napi_gro_frags.patch
deleted file mode 100644
index 3c9680a2790a..000000000000
--- a/target/linux/generic/backport-6.1/795-v6.7-16-r8152-use-napi_gro_frags.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 788d30daa8f97f06166b6a63f0e51f2a4c2f036a Mon Sep 17 00:00:00 2001
-From: Hayes Wang <hayeswang@realtek.com>
-Date: Tue, 26 Sep 2023 19:17:14 +0800
-Subject: [PATCH] r8152: use napi_gro_frags
-
-Use napi_gro_frags() for the skb of fragments when the work_done is less
-than budget.
-
-Signed-off-by: Hayes Wang <hayeswang@realtek.com>
-Link: https://lore.kernel.org/r/20230926111714.9448-434-nic_swsd@realtek.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/usb/r8152.c | 67 ++++++++++++++++++++++++++++++-----------
- 1 file changed, 50 insertions(+), 17 deletions(-)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -2583,8 +2583,9 @@ static int rx_bottom(struct r8152 *tp, i
- 		while (urb->actual_length > len_used) {
- 			struct net_device *netdev = tp->netdev;
- 			struct net_device_stats *stats = &netdev->stats;
--			unsigned int pkt_len, rx_frag_head_sz;
-+			unsigned int pkt_len, rx_frag_head_sz, len;
- 			struct sk_buff *skb;
-+			bool use_frags;
- 
- 			WARN_ON_ONCE(skb_queue_len(&tp->rx_queue) >= 1000);
- 
-@@ -2597,45 +2598,77 @@ static int rx_bottom(struct r8152 *tp, i
- 				break;
- 
- 			pkt_len -= ETH_FCS_LEN;
-+			len = pkt_len;
- 			rx_data += sizeof(struct rx_desc);
- 
--			if (!agg_free || tp->rx_copybreak > pkt_len)
--				rx_frag_head_sz = pkt_len;
-+			if (!agg_free || tp->rx_copybreak > len)
-+				use_frags = false;
- 			else
--				rx_frag_head_sz = tp->rx_copybreak;
-+				use_frags = true;
-+
-+			if (use_frags) {
-+				/* If the budget is exhausted, the packet
-+				 * would be queued in the driver. That is,
-+				 * napi_gro_frags() wouldn't be called, so
-+				 * we couldn't use napi_get_frags().
-+				 */
-+				if (work_done >= budget) {
-+					rx_frag_head_sz = tp->rx_copybreak;
-+					skb = napi_alloc_skb(napi,
-+							     rx_frag_head_sz);
-+				} else {
-+					rx_frag_head_sz = 0;
-+					skb = napi_get_frags(napi);
-+				}
-+			} else {
-+				rx_frag_head_sz = 0;
-+				skb = napi_alloc_skb(napi, len);
-+			}
- 
--			skb = napi_alloc_skb(napi, rx_frag_head_sz);
- 			if (!skb) {
- 				stats->rx_dropped++;
- 				goto find_next_rx;
- 			}
- 
- 			skb->ip_summed = r8152_rx_csum(tp, rx_desc);
--			memcpy(skb->data, rx_data, rx_frag_head_sz);
--			skb_put(skb, rx_frag_head_sz);
--			pkt_len -= rx_frag_head_sz;
--			rx_data += rx_frag_head_sz;
--			if (pkt_len) {
-+			rtl_rx_vlan_tag(rx_desc, skb);
-+
-+			if (use_frags) {
-+				if (rx_frag_head_sz) {
-+					memcpy(skb->data, rx_data,
-+					       rx_frag_head_sz);
-+					skb_put(skb, rx_frag_head_sz);
-+					len -= rx_frag_head_sz;
-+					rx_data += rx_frag_head_sz;
-+					skb->protocol = eth_type_trans(skb,
-+								       netdev);
-+				}
-+
- 				skb_add_rx_frag(skb, 0, agg->page,
- 						agg_offset(agg, rx_data),
--						pkt_len,
--						SKB_DATA_ALIGN(pkt_len));
-+						len, SKB_DATA_ALIGN(len));
- 				get_page(agg->page);
-+			} else {
-+				memcpy(skb->data, rx_data, len);
-+				skb_put(skb, len);
-+				skb->protocol = eth_type_trans(skb, netdev);
- 			}
- 
--			skb->protocol = eth_type_trans(skb, netdev);
--			rtl_rx_vlan_tag(rx_desc, skb);
- 			if (work_done < budget) {
-+				if (use_frags)
-+					napi_gro_frags(napi);
-+				else
-+					napi_gro_receive(napi, skb);
-+
- 				work_done++;
- 				stats->rx_packets++;
--				stats->rx_bytes += skb->len;
--				napi_gro_receive(napi, skb);
-+				stats->rx_bytes += pkt_len;
- 			} else {
- 				__skb_queue_tail(&tp->rx_queue, skb);
- 			}
- 
- find_next_rx:
--			rx_data = rx_agg_align(rx_data + pkt_len + ETH_FCS_LEN);
-+			rx_data = rx_agg_align(rx_data + len + ETH_FCS_LEN);
- 			rx_desc = (struct rx_desc *)rx_data;
- 			len_used = agg_offset(agg, rx_data);
- 			len_used += sizeof(struct rx_desc);
diff --git a/target/linux/generic/backport-6.1/796-v6.5-01-usbnet-ipheth-fix-risk-of-NULL-pointer-deallocation.patch b/target/linux/generic/backport-6.1/796-v6.5-01-usbnet-ipheth-fix-risk-of-NULL-pointer-deallocation.patch
deleted file mode 100644
index d9d6f36fcef3..000000000000
--- a/target/linux/generic/backport-6.1/796-v6.5-01-usbnet-ipheth-fix-risk-of-NULL-pointer-deallocation.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 2203718c2f59ffdd6c78d54e5add594aebb4461e Mon Sep 17 00:00:00 2001
-From: Georgi Valkov <gvalkov@gmail.com>
-Date: Wed, 7 Jun 2023 15:56:59 +0200
-Subject: [PATCH 1/4] usbnet: ipheth: fix risk of NULL pointer deallocation
-
-The cleanup precedure in ipheth_probe will attempt to free a
-NULL pointer in dev->ctrl_buf if the memory allocation for
-this buffer is not successful. While kfree ignores NULL pointers,
-and the existing code is safe, it is a better design to rearrange
-the goto labels and avoid this.
-
-Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
-Signed-off-by: Foster Snowhill <forst@pen.gy>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/ipheth.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/usb/ipheth.c
-+++ b/drivers/net/usb/ipheth.c
-@@ -510,8 +510,8 @@ err_register_netdev:
- 	ipheth_free_urbs(dev);
- err_alloc_urbs:
- err_get_macaddr:
--err_alloc_ctrl_buf:
- 	kfree(dev->ctrl_buf);
-+err_alloc_ctrl_buf:
- err_endpoints:
- 	free_netdev(netdev);
- 	return retval;
diff --git a/target/linux/generic/backport-6.1/796-v6.5-02-usbnet-ipheth-transmit-URBs-without-trailing-padding.patch b/target/linux/generic/backport-6.1/796-v6.5-02-usbnet-ipheth-transmit-URBs-without-trailing-padding.patch
deleted file mode 100644
index adfec356d9fa..000000000000
--- a/target/linux/generic/backport-6.1/796-v6.5-02-usbnet-ipheth-transmit-URBs-without-trailing-padding.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 3e65efcca87a9bb5f3b864e0a43d167bc0a8688c Mon Sep 17 00:00:00 2001
-From: Foster Snowhill <forst@pen.gy>
-Date: Wed, 7 Jun 2023 15:57:00 +0200
-Subject: [PATCH 2/4] usbnet: ipheth: transmit URBs without trailing padding
-
-The behaviour of the official iOS tethering driver on macOS is to not
-transmit any trailing padding at the end of URBs. This is applicable
-to both NCM and legacy modes, including older devices.
-
-Adapt the driver to not include trailing padding in TX URBs, matching
-the behaviour of the official macOS driver.
-
-Signed-off-by: Foster Snowhill <forst@pen.gy>
-Tested-by: Georgi Valkov <gvalkov@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/ipheth.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/net/usb/ipheth.c
-+++ b/drivers/net/usb/ipheth.c
-@@ -373,12 +373,10 @@ static netdev_tx_t ipheth_tx(struct sk_b
- 	}
- 
- 	memcpy(dev->tx_buf, skb->data, skb->len);
--	if (skb->len < IPHETH_BUF_SIZE)
--		memset(dev->tx_buf + skb->len, 0, IPHETH_BUF_SIZE - skb->len);
- 
- 	usb_fill_bulk_urb(dev->tx_urb, udev,
- 			  usb_sndbulkpipe(udev, dev->bulk_out),
--			  dev->tx_buf, IPHETH_BUF_SIZE,
-+			  dev->tx_buf, skb->len,
- 			  ipheth_sndbulk_callback,
- 			  dev);
- 	dev->tx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
diff --git a/target/linux/generic/backport-6.1/796-v6.5-03-usbnet-ipheth-add-CDC-NCM-support.patch b/target/linux/generic/backport-6.1/796-v6.5-03-usbnet-ipheth-add-CDC-NCM-support.patch
deleted file mode 100644
index e3f2b9c3311e..000000000000
--- a/target/linux/generic/backport-6.1/796-v6.5-03-usbnet-ipheth-add-CDC-NCM-support.patch
+++ /dev/null
@@ -1,326 +0,0 @@
-From a2d274c62e44b1995c170595db3865c6fe701226 Mon Sep 17 00:00:00 2001
-From: Foster Snowhill <forst@pen.gy>
-Date: Wed, 7 Jun 2023 15:57:01 +0200
-Subject: [PATCH 3/4] usbnet: ipheth: add CDC NCM support
-
-Recent iOS releases support CDC NCM encapsulation on RX. This mode is
-the default on macOS and Windows. In this mode, an iOS device may include
-one or more Ethernet frames inside a single URB.
-
-Freshly booted iOS devices start in legacy mode, but are put into
-NCM mode by the official Apple driver. When reconnecting such a device
-from a macOS/Windows machine to a Linux host, the device stays in
-NCM mode, making it unusable with the legacy ipheth driver code.
-
-To correctly support such a device, the driver has to either support
-the NCM mode too, or put the device back into legacy mode.
-
-To match the behaviour of the macOS/Windows driver, and since there
-is no documented control command to revert to legacy mode, implement
-NCM support. The device is attempted to be put into NCM mode by default,
-and falls back to legacy mode if the attempt fails.
-
-Signed-off-by: Foster Snowhill <forst@pen.gy>
-Tested-by: Georgi Valkov <gvalkov@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/ipheth.c | 180 +++++++++++++++++++++++++++++++++------
- 1 file changed, 155 insertions(+), 25 deletions(-)
-
---- a/drivers/net/usb/ipheth.c
-+++ b/drivers/net/usb/ipheth.c
-@@ -52,6 +52,7 @@
- #include <linux/ethtool.h>
- #include <linux/usb.h>
- #include <linux/workqueue.h>
-+#include <linux/usb/cdc.h>
- 
- #define USB_VENDOR_APPLE        0x05ac
- 
-@@ -59,8 +60,12 @@
- #define IPHETH_USBINTF_SUBCLASS 253
- #define IPHETH_USBINTF_PROTO    1
- 
--#define IPHETH_BUF_SIZE         1514
- #define IPHETH_IP_ALIGN		2	/* padding at front of URB */
-+#define IPHETH_NCM_HEADER_SIZE  (12 + 96) /* NCMH + NCM0 */
-+#define IPHETH_TX_BUF_SIZE      ETH_FRAME_LEN
-+#define IPHETH_RX_BUF_SIZE_LEGACY (IPHETH_IP_ALIGN + ETH_FRAME_LEN)
-+#define IPHETH_RX_BUF_SIZE_NCM	65536
-+
- #define IPHETH_TX_TIMEOUT       (5 * HZ)
- 
- #define IPHETH_INTFNUM          2
-@@ -71,6 +76,7 @@
- #define IPHETH_CTRL_TIMEOUT     (5 * HZ)
- 
- #define IPHETH_CMD_GET_MACADDR   0x00
-+#define IPHETH_CMD_ENABLE_NCM    0x04
- #define IPHETH_CMD_CARRIER_CHECK 0x45
- 
- #define IPHETH_CARRIER_CHECK_TIMEOUT round_jiffies_relative(1 * HZ)
-@@ -97,6 +103,8 @@ struct ipheth_device {
- 	u8 bulk_out;
- 	struct delayed_work carrier_work;
- 	bool confirmed_pairing;
-+	int (*rcvbulk_callback)(struct urb *urb);
-+	size_t rx_buf_len;
- };
- 
- static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags);
-@@ -116,12 +124,12 @@ static int ipheth_alloc_urbs(struct iphe
- 	if (rx_urb == NULL)
- 		goto free_tx_urb;
- 
--	tx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
-+	tx_buf = usb_alloc_coherent(iphone->udev, IPHETH_TX_BUF_SIZE,
- 				    GFP_KERNEL, &tx_urb->transfer_dma);
- 	if (tx_buf == NULL)
- 		goto free_rx_urb;
- 
--	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
-+	rx_buf = usb_alloc_coherent(iphone->udev, iphone->rx_buf_len,
- 				    GFP_KERNEL, &rx_urb->transfer_dma);
- 	if (rx_buf == NULL)
- 		goto free_tx_buf;
-@@ -134,7 +142,7 @@ static int ipheth_alloc_urbs(struct iphe
- 	return 0;
- 
- free_tx_buf:
--	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, tx_buf,
-+	usb_free_coherent(iphone->udev, IPHETH_TX_BUF_SIZE, tx_buf,
- 			  tx_urb->transfer_dma);
- free_rx_urb:
- 	usb_free_urb(rx_urb);
-@@ -146,9 +154,9 @@ error_nomem:
- 
- static void ipheth_free_urbs(struct ipheth_device *iphone)
- {
--	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN, iphone->rx_buf,
-+	usb_free_coherent(iphone->udev, iphone->rx_buf_len, iphone->rx_buf,
- 			  iphone->rx_urb->transfer_dma);
--	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
-+	usb_free_coherent(iphone->udev, IPHETH_TX_BUF_SIZE, iphone->tx_buf,
- 			  iphone->tx_urb->transfer_dma);
- 	usb_free_urb(iphone->rx_urb);
- 	usb_free_urb(iphone->tx_urb);
-@@ -160,15 +168,106 @@ static void ipheth_kill_urbs(struct iphe
- 	usb_kill_urb(dev->rx_urb);
- }
- 
--static void ipheth_rcvbulk_callback(struct urb *urb)
-+static int ipheth_consume_skb(char *buf, int len, struct ipheth_device *dev)
- {
--	struct ipheth_device *dev;
- 	struct sk_buff *skb;
--	int status;
-+
-+	skb = dev_alloc_skb(len);
-+	if (!skb) {
-+		dev->net->stats.rx_dropped++;
-+		return -ENOMEM;
-+	}
-+
-+	skb_put_data(skb, buf, len);
-+	skb->dev = dev->net;
-+	skb->protocol = eth_type_trans(skb, dev->net);
-+
-+	dev->net->stats.rx_packets++;
-+	dev->net->stats.rx_bytes += len;
-+	netif_rx(skb);
-+
-+	return 0;
-+}
-+
-+static int ipheth_rcvbulk_callback_legacy(struct urb *urb)
-+{
-+	struct ipheth_device *dev;
-+	char *buf;
-+	int len;
-+
-+	dev = urb->context;
-+
-+	if (urb->actual_length <= IPHETH_IP_ALIGN) {
-+		dev->net->stats.rx_length_errors++;
-+		return -EINVAL;
-+	}
-+	len = urb->actual_length - IPHETH_IP_ALIGN;
-+	buf = urb->transfer_buffer + IPHETH_IP_ALIGN;
-+
-+	return ipheth_consume_skb(buf, len, dev);
-+}
-+
-+static int ipheth_rcvbulk_callback_ncm(struct urb *urb)
-+{
-+	struct usb_cdc_ncm_nth16 *ncmh;
-+	struct usb_cdc_ncm_ndp16 *ncm0;
-+	struct usb_cdc_ncm_dpe16 *dpe;
-+	struct ipheth_device *dev;
-+	int retval = -EINVAL;
- 	char *buf;
- 	int len;
- 
- 	dev = urb->context;
-+
-+	if (urb->actual_length < IPHETH_NCM_HEADER_SIZE) {
-+		dev->net->stats.rx_length_errors++;
-+		return retval;
-+	}
-+
-+	ncmh = urb->transfer_buffer;
-+	if (ncmh->dwSignature != cpu_to_le32(USB_CDC_NCM_NTH16_SIGN) ||
-+	    le16_to_cpu(ncmh->wNdpIndex) >= urb->actual_length) {
-+		dev->net->stats.rx_errors++;
-+		return retval;
-+	}
-+
-+	ncm0 = urb->transfer_buffer + le16_to_cpu(ncmh->wNdpIndex);
-+	if (ncm0->dwSignature != cpu_to_le32(USB_CDC_NCM_NDP16_NOCRC_SIGN) ||
-+	    le16_to_cpu(ncmh->wHeaderLength) + le16_to_cpu(ncm0->wLength) >=
-+	    urb->actual_length) {
-+		dev->net->stats.rx_errors++;
-+		return retval;
-+	}
-+
-+	dpe = ncm0->dpe16;
-+	while (le16_to_cpu(dpe->wDatagramIndex) != 0 &&
-+	       le16_to_cpu(dpe->wDatagramLength) != 0) {
-+		if (le16_to_cpu(dpe->wDatagramIndex) >= urb->actual_length ||
-+		    le16_to_cpu(dpe->wDatagramIndex) +
-+		    le16_to_cpu(dpe->wDatagramLength) > urb->actual_length) {
-+			dev->net->stats.rx_length_errors++;
-+			return retval;
-+		}
-+
-+		buf = urb->transfer_buffer + le16_to_cpu(dpe->wDatagramIndex);
-+		len = le16_to_cpu(dpe->wDatagramLength);
-+
-+		retval = ipheth_consume_skb(buf, len, dev);
-+		if (retval != 0)
-+			return retval;
-+
-+		dpe++;
-+	}
-+
-+	return 0;
-+}
-+
-+static void ipheth_rcvbulk_callback(struct urb *urb)
-+{
-+	struct ipheth_device *dev;
-+	int retval, status;
-+
-+	dev = urb->context;
- 	if (dev == NULL)
- 		return;
- 
-@@ -191,25 +290,27 @@ static void ipheth_rcvbulk_callback(stru
- 		dev->net->stats.rx_length_errors++;
- 		return;
- 	}
--	len = urb->actual_length - IPHETH_IP_ALIGN;
--	buf = urb->transfer_buffer + IPHETH_IP_ALIGN;
- 
--	skb = dev_alloc_skb(len);
--	if (!skb) {
--		dev_err(&dev->intf->dev, "%s: dev_alloc_skb: -ENOMEM\n",
--			__func__);
--		dev->net->stats.rx_dropped++;
-+	/* RX URBs starting with 0x00 0x01 do not encapsulate Ethernet frames,
-+	 * but rather are control frames. Their purpose is not documented, and
-+	 * they don't affect driver functionality, okay to drop them.
-+	 * There is usually just one 4-byte control frame as the very first
-+	 * URB received from the bulk IN endpoint.
-+	 */
-+	if (unlikely
-+		(((char *)urb->transfer_buffer)[0] == 0 &&
-+		 ((char *)urb->transfer_buffer)[1] == 1))
-+		goto rx_submit;
-+
-+	retval = dev->rcvbulk_callback(urb);
-+	if (retval != 0) {
-+		dev_err(&dev->intf->dev, "%s: callback retval: %d\n",
-+			__func__, retval);
- 		return;
- 	}
- 
--	skb_put_data(skb, buf, len);
--	skb->dev = dev->net;
--	skb->protocol = eth_type_trans(skb, dev->net);
--
--	dev->net->stats.rx_packets++;
--	dev->net->stats.rx_bytes += len;
-+rx_submit:
- 	dev->confirmed_pairing = true;
--	netif_rx(skb);
- 	ipheth_rx_submit(dev, GFP_ATOMIC);
- }
- 
-@@ -310,6 +411,27 @@ static int ipheth_get_macaddr(struct iph
- 	return retval;
- }
- 
-+static int ipheth_enable_ncm(struct ipheth_device *dev)
-+{
-+	struct usb_device *udev = dev->udev;
-+	int retval;
-+
-+	retval = usb_control_msg(udev,
-+				 usb_sndctrlpipe(udev, IPHETH_CTRL_ENDP),
-+				 IPHETH_CMD_ENABLE_NCM, /* request */
-+				 0x41, /* request type */
-+				 0x00, /* value */
-+				 0x02, /* index */
-+				 NULL,
-+				 0,
-+				 IPHETH_CTRL_TIMEOUT);
-+
-+	dev_info(&dev->intf->dev, "%s: usb_control_msg: %d\n",
-+		 __func__, retval);
-+
-+	return retval;
-+}
-+
- static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags)
- {
- 	struct usb_device *udev = dev->udev;
-@@ -317,7 +439,7 @@ static int ipheth_rx_submit(struct iphet
- 
- 	usb_fill_bulk_urb(dev->rx_urb, udev,
- 			  usb_rcvbulkpipe(udev, dev->bulk_in),
--			  dev->rx_buf, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
-+			  dev->rx_buf, dev->rx_buf_len,
- 			  ipheth_rcvbulk_callback,
- 			  dev);
- 	dev->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-@@ -365,7 +487,7 @@ static netdev_tx_t ipheth_tx(struct sk_b
- 	int retval;
- 
- 	/* Paranoid */
--	if (skb->len > IPHETH_BUF_SIZE) {
-+	if (skb->len > IPHETH_TX_BUF_SIZE) {
- 		WARN(1, "%s: skb too large: %d bytes\n", __func__, skb->len);
- 		dev->net->stats.tx_dropped++;
- 		dev_kfree_skb_any(skb);
-@@ -448,6 +570,8 @@ static int ipheth_probe(struct usb_inter
- 	dev->net = netdev;
- 	dev->intf = intf;
- 	dev->confirmed_pairing = false;
-+	dev->rx_buf_len = IPHETH_RX_BUF_SIZE_LEGACY;
-+	dev->rcvbulk_callback = ipheth_rcvbulk_callback_legacy;
- 	/* Set up endpoints */
- 	hintf = usb_altnum_to_altsetting(intf, IPHETH_ALT_INTFNUM);
- 	if (hintf == NULL) {
-@@ -479,6 +603,12 @@ static int ipheth_probe(struct usb_inter
- 	if (retval)
- 		goto err_get_macaddr;
- 
-+	retval = ipheth_enable_ncm(dev);
-+	if (!retval) {
-+		dev->rx_buf_len = IPHETH_RX_BUF_SIZE_NCM;
-+		dev->rcvbulk_callback = ipheth_rcvbulk_callback_ncm;
-+	}
-+
- 	INIT_DELAYED_WORK(&dev->carrier_work, ipheth_carrier_check_work);
- 
- 	retval = ipheth_alloc_urbs(dev);
diff --git a/target/linux/generic/backport-6.1/796-v6.5-04-usbnet-ipheth-update-Kconfig-description.patch b/target/linux/generic/backport-6.1/796-v6.5-04-usbnet-ipheth-update-Kconfig-description.patch
deleted file mode 100644
index 9089c4d8c34a..000000000000
--- a/target/linux/generic/backport-6.1/796-v6.5-04-usbnet-ipheth-update-Kconfig-description.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 0c6e9d32ef0ccfcf2d875cbcff23bf345a54d585 Mon Sep 17 00:00:00 2001
-From: Foster Snowhill <forst@pen.gy>
-Date: Wed, 7 Jun 2023 15:57:02 +0200
-Subject: [PATCH 4/4] usbnet: ipheth: update Kconfig description
-
-This module has for a long time not been limited to iPhone <= 3GS.
-Update description to match the actual state of the driver.
-
-Remove dead link from 2010, instead reference an existing userspace
-iOS device pairing implementation as part of libimobiledevice.
-
-Signed-off-by: Foster Snowhill <forst@pen.gy>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/usb/Kconfig | 10 ++++------
- 1 file changed, 4 insertions(+), 6 deletions(-)
-
---- a/drivers/net/usb/Kconfig
-+++ b/drivers/net/usb/Kconfig
-@@ -583,12 +583,10 @@ config USB_IPHETH
- 	default n
- 	help
- 	  Module used to share Internet connection (tethering) from your
--	  iPhone (Original, 3G and 3GS) to your system.
--	  Note that you need userspace libraries and programs that are needed
--	  to pair your device with your system and that understand the iPhone
--	  protocol.
--
--	  For more information: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver
-+	  iPhone to your system.
-+	  Note that you need a corresponding userspace library/program
-+	  to pair your device with your system, for example usbmuxd
-+	  <https://github.com/libimobiledevice/usbmuxd>.
- 
- config USB_SIERRA_NET
- 	tristate "USB-to-WWAN Driver for Sierra Wireless modems"
diff --git a/target/linux/generic/backport-6.1/797-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch b/target/linux/generic/backport-6.1/797-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch
deleted file mode 100644
index 0afc69fa44cf..000000000000
--- a/target/linux/generic/backport-6.1/797-6.7-net-dsa-mv88e6xxx-fix-marvell-6350-switch-probing.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From b3f1a164c7f742503dc7159011f7ad6b092b660e Mon Sep 17 00:00:00 2001
-From: Greg Ungerer <gerg@kernel.org>
-Date: Fri, 24 Nov 2023 14:15:28 +1000
-Subject: [PATCH] net: dsa: mv88e6xxx: fix marvell 6350 switch probing
-
-As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to
-be filled") Marvell 88e6350 switches fail to be probed:
-
-    ...
-    mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2
-    mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces
-    error creating PHYLINK: -22
-    mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22
-    ...
-
-The problem stems from the use of mv88e6185_phylink_get_caps() to get
-the device capabilities. Create a new dedicated phylink_get_caps for the
-6351 family (which the 6350 is one of) to properly support their set of
-capabilities.
-
-According to chip.h the 6351 switch family includes the 6171, 6175, 6350
-and 6351 switches, so update each of these to use the correct
-phylink_get_caps.
-
-Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
-Signed-off-by: Greg Ungerer <gerg@kernel.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 20 ++++++++++++++++----
- 1 file changed, 16 insertions(+), 4 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -652,6 +652,18 @@ static void mv88e6250_phylink_get_caps(s
- 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100;
- }
- 
-+static void mv88e6351_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
-+				       struct phylink_config *config)
-+{
-+	unsigned long *supported = config->supported_interfaces;
-+
-+	/* Translate the default cmode */
-+	mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
-+
-+	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 |
-+				   MAC_1000FD;
-+}
-+
- static int mv88e6352_get_port4_serdes_cmode(struct mv88e6xxx_chip *chip)
- {
- 	u16 reg, val;
-@@ -4502,7 +4514,7 @@ static const struct mv88e6xxx_ops mv88e6
- 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
- 	.stu_getnext = mv88e6352_g1_stu_getnext,
- 	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
--	.phylink_get_caps = mv88e6185_phylink_get_caps,
-+	.phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6172_ops = {
-@@ -4605,7 +4617,7 @@ static const struct mv88e6xxx_ops mv88e6
- 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
- 	.stu_getnext = mv88e6352_g1_stu_getnext,
- 	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
--	.phylink_get_caps = mv88e6185_phylink_get_caps,
-+	.phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6176_ops = {
-@@ -5282,7 +5294,7 @@ static const struct mv88e6xxx_ops mv88e6
- 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
- 	.stu_getnext = mv88e6352_g1_stu_getnext,
- 	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
--	.phylink_get_caps = mv88e6185_phylink_get_caps,
-+	.phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6351_ops = {
-@@ -5328,7 +5340,7 @@ static const struct mv88e6xxx_ops mv88e6
- 	.stu_loadpurge = mv88e6352_g1_stu_loadpurge,
- 	.avb_ops = &mv88e6352_avb_ops,
- 	.ptp_ops = &mv88e6352_ptp_ops,
--	.phylink_get_caps = mv88e6185_phylink_get_caps,
-+	.phylink_get_caps = mv88e6351_phylink_get_caps,
- };
- 
- static const struct mv88e6xxx_ops mv88e6352_ops = {
diff --git a/target/linux/generic/backport-6.1/798-v6.10-net-phy-air_en8811h-Add-the-Airoha-EN8811H-PHY-drive.patch b/target/linux/generic/backport-6.1/798-v6.10-net-phy-air_en8811h-Add-the-Airoha-EN8811H-PHY-drive.patch
deleted file mode 100644
index 7f963b3cf66e..000000000000
--- a/target/linux/generic/backport-6.1/798-v6.10-net-phy-air_en8811h-Add-the-Airoha-EN8811H-PHY-drive.patch
+++ /dev/null
@@ -1,1140 +0,0 @@
-From 71e79430117d56c409c5ea485a263bc0d8083390 Mon Sep 17 00:00:00 2001
-From: Eric Woudstra <ericwouds@gmail.com>
-Date: Tue, 26 Mar 2024 17:23:05 +0100
-Subject: [PATCH] net: phy: air_en8811h: Add the Airoha EN8811H PHY driver
-
-Add the driver for the Airoha EN8811H 2.5 Gigabit PHY. The phy supports
-100/1000/2500 Mbps with auto negotiation only.
-
-The driver uses two firmware files, for which updated versions are added to
-linux-firmware already.
-
-Note: At phy-address + 8 there is another device on the mdio bus, that
-belongs to the EN881H. While the original driver writes to it, Airoha
-has confirmed this is not needed. Therefore, communication with this
-device is not included in this driver.
-
-Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240326162305.303598-3-ericwouds@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/Kconfig       |    5 +
- drivers/net/phy/Makefile      |    1 +
- drivers/net/phy/air_en8811h.c | 1086 +++++++++++++++++++++++++++++++++
- 3 files changed, 1092 insertions(+)
- create mode 100644 drivers/net/phy/air_en8811h.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -63,6 +63,11 @@ config SFP
- 
- comment "MII PHY device drivers"
- 
-+config AIR_EN8811H_PHY
-+	tristate "Airoha EN8811H 2.5 Gigabit PHY"
-+	help
-+	  Currently supports the Airoha EN8811H PHY.
-+
- config AMD_PHY
- 	tristate "AMD PHYs"
- 	help
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -32,6 +32,7 @@ obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
- 
- obj-$(CONFIG_ADIN_PHY)		+= adin.o
- obj-$(CONFIG_ADIN1100_PHY)	+= adin1100.o
-+obj-$(CONFIG_AIR_EN8811H_PHY)   += air_en8811h.o
- obj-$(CONFIG_AMD_PHY)		+= amd.o
- obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia/
- obj-$(CONFIG_AX88796B_PHY)	+= ax88796b.o
---- /dev/null
-+++ b/drivers/net/phy/air_en8811h.c
-@@ -0,0 +1,1086 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Driver for the Airoha EN8811H 2.5 Gigabit PHY.
-+ *
-+ * Limitations of the EN8811H:
-+ * - Only full duplex supported
-+ * - Forced speed (AN off) is not supported by hardware (100Mbps)
-+ *
-+ * Source originated from airoha's en8811h.c and en8811h.h v1.2.1
-+ *
-+ * Copyright (C) 2023 Airoha Technology Corp.
-+ */
-+
-+#include <linux/phy.h>
-+#include <linux/firmware.h>
-+#include <linux/property.h>
-+#include <linux/wordpart.h>
-+#include <asm/unaligned.h>
-+
-+#define EN8811H_PHY_ID		0x03a2a411
-+
-+#define EN8811H_MD32_DM		"airoha/EthMD32.dm.bin"
-+#define EN8811H_MD32_DSP	"airoha/EthMD32.DSP.bin"
-+
-+#define AIR_FW_ADDR_DM	0x00000000
-+#define AIR_FW_ADDR_DSP	0x00100000
-+
-+/* MII Registers */
-+#define AIR_AUX_CTRL_STATUS		0x1d
-+#define   AIR_AUX_CTRL_STATUS_SPEED_MASK	GENMASK(4, 2)
-+#define   AIR_AUX_CTRL_STATUS_SPEED_100		0x4
-+#define   AIR_AUX_CTRL_STATUS_SPEED_1000	0x8
-+#define   AIR_AUX_CTRL_STATUS_SPEED_2500	0xc
-+
-+#define AIR_EXT_PAGE_ACCESS		0x1f
-+#define   AIR_PHY_PAGE_STANDARD			0x0000
-+#define   AIR_PHY_PAGE_EXTENDED_4		0x0004
-+
-+/* MII Registers Page 4*/
-+#define AIR_BPBUS_MODE			0x10
-+#define   AIR_BPBUS_MODE_ADDR_FIXED		0x0000
-+#define   AIR_BPBUS_MODE_ADDR_INCR		BIT(15)
-+#define AIR_BPBUS_WR_ADDR_HIGH		0x11
-+#define AIR_BPBUS_WR_ADDR_LOW		0x12
-+#define AIR_BPBUS_WR_DATA_HIGH		0x13
-+#define AIR_BPBUS_WR_DATA_LOW		0x14
-+#define AIR_BPBUS_RD_ADDR_HIGH		0x15
-+#define AIR_BPBUS_RD_ADDR_LOW		0x16
-+#define AIR_BPBUS_RD_DATA_HIGH		0x17
-+#define AIR_BPBUS_RD_DATA_LOW		0x18
-+
-+/* Registers on MDIO_MMD_VEND1 */
-+#define EN8811H_PHY_FW_STATUS		0x8009
-+#define   EN8811H_PHY_READY			0x02
-+
-+#define AIR_PHY_MCU_CMD_1		0x800c
-+#define AIR_PHY_MCU_CMD_1_MODE1			0x0
-+#define AIR_PHY_MCU_CMD_2		0x800d
-+#define AIR_PHY_MCU_CMD_2_MODE1			0x0
-+#define AIR_PHY_MCU_CMD_3		0x800e
-+#define AIR_PHY_MCU_CMD_3_MODE1			0x1101
-+#define AIR_PHY_MCU_CMD_3_DOCMD			0x1100
-+#define AIR_PHY_MCU_CMD_4		0x800f
-+#define AIR_PHY_MCU_CMD_4_MODE1			0x0002
-+#define AIR_PHY_MCU_CMD_4_INTCLR		0x00e4
-+
-+/* Registers on MDIO_MMD_VEND2 */
-+#define AIR_PHY_LED_BCR			0x021
-+#define   AIR_PHY_LED_BCR_MODE_MASK		GENMASK(1, 0)
-+#define   AIR_PHY_LED_BCR_TIME_TEST		BIT(2)
-+#define   AIR_PHY_LED_BCR_CLK_EN		BIT(3)
-+#define   AIR_PHY_LED_BCR_EXT_CTRL		BIT(15)
-+
-+#define AIR_PHY_LED_DUR_ON		0x022
-+
-+#define AIR_PHY_LED_DUR_BLINK		0x023
-+
-+#define AIR_PHY_LED_ON(i)	       (0x024 + ((i) * 2))
-+#define   AIR_PHY_LED_ON_MASK			(GENMASK(6, 0) | BIT(8))
-+#define   AIR_PHY_LED_ON_LINK1000		BIT(0)
-+#define   AIR_PHY_LED_ON_LINK100		BIT(1)
-+#define   AIR_PHY_LED_ON_LINK10			BIT(2)
-+#define   AIR_PHY_LED_ON_LINKDOWN		BIT(3)
-+#define   AIR_PHY_LED_ON_FDX			BIT(4) /* Full duplex */
-+#define   AIR_PHY_LED_ON_HDX			BIT(5) /* Half duplex */
-+#define   AIR_PHY_LED_ON_FORCE_ON		BIT(6)
-+#define   AIR_PHY_LED_ON_LINK2500		BIT(8)
-+#define   AIR_PHY_LED_ON_POLARITY		BIT(14)
-+#define   AIR_PHY_LED_ON_ENABLE			BIT(15)
-+
-+#define AIR_PHY_LED_BLINK(i)	       (0x025 + ((i) * 2))
-+#define   AIR_PHY_LED_BLINK_1000TX		BIT(0)
-+#define   AIR_PHY_LED_BLINK_1000RX		BIT(1)
-+#define   AIR_PHY_LED_BLINK_100TX		BIT(2)
-+#define   AIR_PHY_LED_BLINK_100RX		BIT(3)
-+#define   AIR_PHY_LED_BLINK_10TX		BIT(4)
-+#define   AIR_PHY_LED_BLINK_10RX		BIT(5)
-+#define   AIR_PHY_LED_BLINK_COLLISION		BIT(6)
-+#define   AIR_PHY_LED_BLINK_RX_CRC_ERR		BIT(7)
-+#define   AIR_PHY_LED_BLINK_RX_IDLE_ERR		BIT(8)
-+#define   AIR_PHY_LED_BLINK_FORCE_BLINK		BIT(9)
-+#define   AIR_PHY_LED_BLINK_2500TX		BIT(10)
-+#define   AIR_PHY_LED_BLINK_2500RX		BIT(11)
-+
-+/* Registers on BUCKPBUS */
-+#define EN8811H_2P5G_LPA		0x3b30
-+#define   EN8811H_2P5G_LPA_2P5G			BIT(0)
-+
-+#define EN8811H_FW_VERSION		0x3b3c
-+
-+#define EN8811H_POLARITY		0xca0f8
-+#define   EN8811H_POLARITY_TX_NORMAL		BIT(0)
-+#define   EN8811H_POLARITY_RX_REVERSE		BIT(1)
-+
-+#define EN8811H_GPIO_OUTPUT		0xcf8b8
-+#define   EN8811H_GPIO_OUTPUT_345		(BIT(3) | BIT(4) | BIT(5))
-+
-+#define EN8811H_FW_CTRL_1		0x0f0018
-+#define   EN8811H_FW_CTRL_1_START		0x0
-+#define   EN8811H_FW_CTRL_1_FINISH		0x1
-+#define EN8811H_FW_CTRL_2		0x800000
-+#define EN8811H_FW_CTRL_2_LOADING		BIT(11)
-+
-+/* Led definitions */
-+#define EN8811H_LED_COUNT	3
-+
-+/* Default LED setup:
-+ * GPIO5 <-> LED0  On: Link detected, blink Rx/Tx
-+ * GPIO4 <-> LED1  On: Link detected at 2500 or 1000 Mbps
-+ * GPIO3 <-> LED2  On: Link detected at 2500 or  100 Mbps
-+ */
-+#define AIR_DEFAULT_TRIGGER_LED0 (BIT(TRIGGER_NETDEV_LINK)      | \
-+				  BIT(TRIGGER_NETDEV_RX)        | \
-+				  BIT(TRIGGER_NETDEV_TX))
-+#define AIR_DEFAULT_TRIGGER_LED1 (BIT(TRIGGER_NETDEV_LINK_2500) | \
-+				  BIT(TRIGGER_NETDEV_LINK_1000))
-+#define AIR_DEFAULT_TRIGGER_LED2 (BIT(TRIGGER_NETDEV_LINK_2500) | \
-+				  BIT(TRIGGER_NETDEV_LINK_100))
-+
-+struct led {
-+	unsigned long rules;
-+	unsigned long state;
-+};
-+
-+struct en8811h_priv {
-+	u32		firmware_version;
-+	bool		mcu_needs_restart;
-+	struct led	led[EN8811H_LED_COUNT];
-+};
-+
-+enum {
-+	AIR_PHY_LED_STATE_FORCE_ON,
-+	AIR_PHY_LED_STATE_FORCE_BLINK,
-+};
-+
-+enum {
-+	AIR_PHY_LED_DUR_BLINK_32MS,
-+	AIR_PHY_LED_DUR_BLINK_64MS,
-+	AIR_PHY_LED_DUR_BLINK_128MS,
-+	AIR_PHY_LED_DUR_BLINK_256MS,
-+	AIR_PHY_LED_DUR_BLINK_512MS,
-+	AIR_PHY_LED_DUR_BLINK_1024MS,
-+};
-+
-+enum {
-+	AIR_LED_DISABLE,
-+	AIR_LED_ENABLE,
-+};
-+
-+enum {
-+	AIR_ACTIVE_LOW,
-+	AIR_ACTIVE_HIGH,
-+};
-+
-+enum {
-+	AIR_LED_MODE_DISABLE,
-+	AIR_LED_MODE_USER_DEFINE,
-+};
-+
-+#define AIR_PHY_LED_DUR_UNIT	1024
-+#define AIR_PHY_LED_DUR (AIR_PHY_LED_DUR_UNIT << AIR_PHY_LED_DUR_BLINK_64MS)
-+
-+static const unsigned long en8811h_led_trig = BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
-+					      BIT(TRIGGER_NETDEV_LINK)        |
-+					      BIT(TRIGGER_NETDEV_LINK_10)     |
-+					      BIT(TRIGGER_NETDEV_LINK_100)    |
-+					      BIT(TRIGGER_NETDEV_LINK_1000)   |
-+					      BIT(TRIGGER_NETDEV_LINK_2500)   |
-+					      BIT(TRIGGER_NETDEV_RX)          |
-+					      BIT(TRIGGER_NETDEV_TX);
-+
-+static int air_phy_read_page(struct phy_device *phydev)
-+{
-+	return __phy_read(phydev, AIR_EXT_PAGE_ACCESS);
-+}
-+
-+static int air_phy_write_page(struct phy_device *phydev, int page)
-+{
-+	return __phy_write(phydev, AIR_EXT_PAGE_ACCESS, page);
-+}
-+
-+static int __air_buckpbus_reg_write(struct phy_device *phydev,
-+				    u32 pbus_address, u32 pbus_data)
-+{
-+	int ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_MODE, AIR_BPBUS_MODE_ADDR_FIXED);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_HIGH,
-+			  upper_16_bits(pbus_address));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_LOW,
-+			  lower_16_bits(pbus_address));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_HIGH,
-+			  upper_16_bits(pbus_data));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_LOW,
-+			  lower_16_bits(pbus_data));
-+	if (ret < 0)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+static int air_buckpbus_reg_write(struct phy_device *phydev,
-+				  u32 pbus_address, u32 pbus_data)
-+{
-+	int saved_page;
-+	int ret = 0;
-+
-+	saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4);
-+
-+	if (saved_page >= 0) {
-+		ret = __air_buckpbus_reg_write(phydev, pbus_address,
-+					       pbus_data);
-+		if (ret < 0)
-+			phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__,
-+				   pbus_address, ret);
-+	}
-+
-+	return phy_restore_page(phydev, saved_page, ret);
-+}
-+
-+static int __air_buckpbus_reg_read(struct phy_device *phydev,
-+				   u32 pbus_address, u32 *pbus_data)
-+{
-+	int pbus_data_low, pbus_data_high;
-+	int ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_MODE, AIR_BPBUS_MODE_ADDR_FIXED);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_RD_ADDR_HIGH,
-+			  upper_16_bits(pbus_address));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_RD_ADDR_LOW,
-+			  lower_16_bits(pbus_address));
-+	if (ret < 0)
-+		return ret;
-+
-+	pbus_data_high = __phy_read(phydev, AIR_BPBUS_RD_DATA_HIGH);
-+	if (pbus_data_high < 0)
-+		return ret;
-+
-+	pbus_data_low = __phy_read(phydev, AIR_BPBUS_RD_DATA_LOW);
-+	if (pbus_data_low < 0)
-+		return ret;
-+
-+	*pbus_data = pbus_data_low | (pbus_data_high << 16);
-+	return 0;
-+}
-+
-+static int air_buckpbus_reg_read(struct phy_device *phydev,
-+				 u32 pbus_address, u32 *pbus_data)
-+{
-+	int saved_page;
-+	int ret = 0;
-+
-+	saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4);
-+
-+	if (saved_page >= 0) {
-+		ret = __air_buckpbus_reg_read(phydev, pbus_address, pbus_data);
-+		if (ret < 0)
-+			phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__,
-+				   pbus_address, ret);
-+	}
-+
-+	return phy_restore_page(phydev, saved_page, ret);
-+}
-+
-+static int __air_buckpbus_reg_modify(struct phy_device *phydev,
-+				     u32 pbus_address, u32 mask, u32 set)
-+{
-+	int pbus_data_low, pbus_data_high;
-+	u32 pbus_data_old, pbus_data_new;
-+	int ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_MODE, AIR_BPBUS_MODE_ADDR_FIXED);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_RD_ADDR_HIGH,
-+			  upper_16_bits(pbus_address));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_RD_ADDR_LOW,
-+			  lower_16_bits(pbus_address));
-+	if (ret < 0)
-+		return ret;
-+
-+	pbus_data_high = __phy_read(phydev, AIR_BPBUS_RD_DATA_HIGH);
-+	if (pbus_data_high < 0)
-+		return ret;
-+
-+	pbus_data_low = __phy_read(phydev, AIR_BPBUS_RD_DATA_LOW);
-+	if (pbus_data_low < 0)
-+		return ret;
-+
-+	pbus_data_old = pbus_data_low | (pbus_data_high << 16);
-+	pbus_data_new = (pbus_data_old & ~mask) | set;
-+	if (pbus_data_new == pbus_data_old)
-+		return 0;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_HIGH,
-+			  upper_16_bits(pbus_address));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_LOW,
-+			  lower_16_bits(pbus_address));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_HIGH,
-+			  upper_16_bits(pbus_data_new));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_LOW,
-+			  lower_16_bits(pbus_data_new));
-+	if (ret < 0)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+static int air_buckpbus_reg_modify(struct phy_device *phydev,
-+				   u32 pbus_address, u32 mask, u32 set)
-+{
-+	int saved_page;
-+	int ret = 0;
-+
-+	saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4);
-+
-+	if (saved_page >= 0) {
-+		ret = __air_buckpbus_reg_modify(phydev, pbus_address, mask,
-+						set);
-+		if (ret < 0)
-+			phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__,
-+				   pbus_address, ret);
-+	}
-+
-+	return phy_restore_page(phydev, saved_page, ret);
-+}
-+
-+static int __air_write_buf(struct phy_device *phydev, u32 address,
-+			   const struct firmware *fw)
-+{
-+	unsigned int offset;
-+	int ret;
-+	u16 val;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_MODE, AIR_BPBUS_MODE_ADDR_INCR);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_HIGH,
-+			  upper_16_bits(address));
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_LOW,
-+			  lower_16_bits(address));
-+	if (ret < 0)
-+		return ret;
-+
-+	for (offset = 0; offset < fw->size; offset += 4) {
-+		val = get_unaligned_le16(&fw->data[offset + 2]);
-+		ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_HIGH, val);
-+		if (ret < 0)
-+			return ret;
-+
-+		val = get_unaligned_le16(&fw->data[offset]);
-+		ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_LOW, val);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int air_write_buf(struct phy_device *phydev, u32 address,
-+			 const struct firmware *fw)
-+{
-+	int saved_page;
-+	int ret = 0;
-+
-+	saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4);
-+
-+	if (saved_page >= 0) {
-+		ret = __air_write_buf(phydev, address, fw);
-+		if (ret < 0)
-+			phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__,
-+				   address, ret);
-+	}
-+
-+	return phy_restore_page(phydev, saved_page, ret);
-+}
-+
-+static int en8811h_wait_mcu_ready(struct phy_device *phydev)
-+{
-+	int ret, reg_value;
-+
-+	/* Because of mdio-lock, may have to wait for multiple loads */
-+	ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
-+					EN8811H_PHY_FW_STATUS, reg_value,
-+					reg_value == EN8811H_PHY_READY,
-+					20000, 7500000, true);
-+	if (ret) {
-+		phydev_err(phydev, "MCU not ready: 0x%x\n", reg_value);
-+		return -ENODEV;
-+	}
-+
-+	return 0;
-+}
-+
-+static int en8811h_load_firmware(struct phy_device *phydev)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+	struct device *dev = &phydev->mdio.dev;
-+	const struct firmware *fw1, *fw2;
-+	int ret;
-+
-+	ret = request_firmware_direct(&fw1, EN8811H_MD32_DM, dev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = request_firmware_direct(&fw2, EN8811H_MD32_DSP, dev);
-+	if (ret < 0)
-+		goto en8811h_load_firmware_rel1;
-+
-+	ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1,
-+				     EN8811H_FW_CTRL_1_START);
-+	if (ret < 0)
-+		goto en8811h_load_firmware_out;
-+
-+	ret = air_buckpbus_reg_modify(phydev, EN8811H_FW_CTRL_2,
-+				      EN8811H_FW_CTRL_2_LOADING,
-+				      EN8811H_FW_CTRL_2_LOADING);
-+	if (ret < 0)
-+		goto en8811h_load_firmware_out;
-+
-+	ret = air_write_buf(phydev, AIR_FW_ADDR_DM,  fw1);
-+	if (ret < 0)
-+		goto en8811h_load_firmware_out;
-+
-+	ret = air_write_buf(phydev, AIR_FW_ADDR_DSP, fw2);
-+	if (ret < 0)
-+		goto en8811h_load_firmware_out;
-+
-+	ret = air_buckpbus_reg_modify(phydev, EN8811H_FW_CTRL_2,
-+				      EN8811H_FW_CTRL_2_LOADING, 0);
-+	if (ret < 0)
-+		goto en8811h_load_firmware_out;
-+
-+	ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1,
-+				     EN8811H_FW_CTRL_1_FINISH);
-+	if (ret < 0)
-+		goto en8811h_load_firmware_out;
-+
-+	ret = en8811h_wait_mcu_ready(phydev);
-+
-+	air_buckpbus_reg_read(phydev, EN8811H_FW_VERSION,
-+			      &priv->firmware_version);
-+	phydev_info(phydev, "MD32 firmware version: %08x\n",
-+		    priv->firmware_version);
-+
-+en8811h_load_firmware_out:
-+	release_firmware(fw2);
-+
-+en8811h_load_firmware_rel1:
-+	release_firmware(fw1);
-+
-+	if (ret < 0)
-+		phydev_err(phydev, "Load firmware failed: %d\n", ret);
-+
-+	return ret;
-+}
-+
-+static int en8811h_restart_mcu(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1,
-+				     EN8811H_FW_CTRL_1_START);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1,
-+				     EN8811H_FW_CTRL_1_FINISH);
-+	if (ret < 0)
-+		return ret;
-+
-+	return en8811h_wait_mcu_ready(phydev);
-+}
-+
-+static int air_hw_led_on_set(struct phy_device *phydev, u8 index, bool on)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+	bool changed;
-+
-+	if (index >= EN8811H_LED_COUNT)
-+		return -EINVAL;
-+
-+	if (on)
-+		changed = !test_and_set_bit(AIR_PHY_LED_STATE_FORCE_ON,
-+					    &priv->led[index].state);
-+	else
-+		changed = !!test_and_clear_bit(AIR_PHY_LED_STATE_FORCE_ON,
-+					       &priv->led[index].state);
-+
-+	changed |= (priv->led[index].rules != 0);
-+
-+	if (changed)
-+		return phy_modify_mmd(phydev, MDIO_MMD_VEND2,
-+				      AIR_PHY_LED_ON(index),
-+				      AIR_PHY_LED_ON_MASK,
-+				      on ? AIR_PHY_LED_ON_FORCE_ON : 0);
-+
-+	return 0;
-+}
-+
-+static int air_hw_led_blink_set(struct phy_device *phydev, u8 index,
-+				bool blinking)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+	bool changed;
-+
-+	if (index >= EN8811H_LED_COUNT)
-+		return -EINVAL;
-+
-+	if (blinking)
-+		changed = !test_and_set_bit(AIR_PHY_LED_STATE_FORCE_BLINK,
-+					    &priv->led[index].state);
-+	else
-+		changed = !!test_and_clear_bit(AIR_PHY_LED_STATE_FORCE_BLINK,
-+					       &priv->led[index].state);
-+
-+	changed |= (priv->led[index].rules != 0);
-+
-+	if (changed)
-+		return phy_write_mmd(phydev, MDIO_MMD_VEND2,
-+				     AIR_PHY_LED_BLINK(index),
-+				     blinking ?
-+				     AIR_PHY_LED_BLINK_FORCE_BLINK : 0);
-+	else
-+		return 0;
-+}
-+
-+static int air_led_blink_set(struct phy_device *phydev, u8 index,
-+			     unsigned long *delay_on,
-+			     unsigned long *delay_off)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+	bool blinking = false;
-+	int err;
-+
-+	if (index >= EN8811H_LED_COUNT)
-+		return -EINVAL;
-+
-+	if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
-+		blinking = true;
-+		*delay_on = 50;
-+		*delay_off = 50;
-+	}
-+
-+	err = air_hw_led_blink_set(phydev, index, blinking);
-+	if (err)
-+		return err;
-+
-+	/* led-blink set, so switch led-on off */
-+	err = air_hw_led_on_set(phydev, index, false);
-+	if (err)
-+		return err;
-+
-+	/* hw-control is off*/
-+	if (!!test_bit(AIR_PHY_LED_STATE_FORCE_BLINK, &priv->led[index].state))
-+		priv->led[index].rules = 0;
-+
-+	return 0;
-+}
-+
-+static int air_led_brightness_set(struct phy_device *phydev, u8 index,
-+				  enum led_brightness value)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+	int err;
-+
-+	if (index >= EN8811H_LED_COUNT)
-+		return -EINVAL;
-+
-+	/* led-on set, so switch led-blink off */
-+	err = air_hw_led_blink_set(phydev, index, false);
-+	if (err)
-+		return err;
-+
-+	err = air_hw_led_on_set(phydev, index, (value != LED_OFF));
-+	if (err)
-+		return err;
-+
-+	/* hw-control is off */
-+	if (!!test_bit(AIR_PHY_LED_STATE_FORCE_ON, &priv->led[index].state))
-+		priv->led[index].rules = 0;
-+
-+	return 0;
-+}
-+
-+static int air_led_hw_control_get(struct phy_device *phydev, u8 index,
-+				  unsigned long *rules)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+
-+	if (index >= EN8811H_LED_COUNT)
-+		return -EINVAL;
-+
-+	*rules = priv->led[index].rules;
-+
-+	return 0;
-+};
-+
-+static int air_led_hw_control_set(struct phy_device *phydev, u8 index,
-+				  unsigned long rules)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+	u16 on = 0, blink = 0;
-+	int ret;
-+
-+	if (index >= EN8811H_LED_COUNT)
-+		return -EINVAL;
-+
-+	priv->led[index].rules = rules;
-+
-+	if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
-+		on |= AIR_PHY_LED_ON_FDX;
-+
-+	if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
-+		on |= AIR_PHY_LED_ON_LINK10;
-+
-+	if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
-+		on |= AIR_PHY_LED_ON_LINK100;
-+
-+	if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
-+		on |= AIR_PHY_LED_ON_LINK1000;
-+
-+	if (rules & (BIT(TRIGGER_NETDEV_LINK_2500) | BIT(TRIGGER_NETDEV_LINK)))
-+		on |= AIR_PHY_LED_ON_LINK2500;
-+
-+	if (rules & BIT(TRIGGER_NETDEV_RX)) {
-+		blink |= AIR_PHY_LED_BLINK_10RX   |
-+			 AIR_PHY_LED_BLINK_100RX  |
-+			 AIR_PHY_LED_BLINK_1000RX |
-+			 AIR_PHY_LED_BLINK_2500RX;
-+	}
-+
-+	if (rules & BIT(TRIGGER_NETDEV_TX)) {
-+		blink |= AIR_PHY_LED_BLINK_10TX   |
-+			 AIR_PHY_LED_BLINK_100TX  |
-+			 AIR_PHY_LED_BLINK_1000TX |
-+			 AIR_PHY_LED_BLINK_2500TX;
-+	}
-+
-+	if (blink || on) {
-+		/* switch hw-control on, so led-on and led-blink are off */
-+		clear_bit(AIR_PHY_LED_STATE_FORCE_ON,
-+			  &priv->led[index].state);
-+		clear_bit(AIR_PHY_LED_STATE_FORCE_BLINK,
-+			  &priv->led[index].state);
-+	} else {
-+		priv->led[index].rules = 0;
-+	}
-+
-+	ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_ON(index),
-+			     AIR_PHY_LED_ON_MASK, on);
-+
-+	if (ret < 0)
-+		return ret;
-+
-+	return phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_BLINK(index),
-+			     blink);
-+};
-+
-+static int air_led_init(struct phy_device *phydev, u8 index, u8 state, u8 pol)
-+{
-+	int val = 0;
-+	int err;
-+
-+	if (index >= EN8811H_LED_COUNT)
-+		return -EINVAL;
-+
-+	if (state == AIR_LED_ENABLE)
-+		val |= AIR_PHY_LED_ON_ENABLE;
-+	else
-+		val &= ~AIR_PHY_LED_ON_ENABLE;
-+
-+	if (pol == AIR_ACTIVE_HIGH)
-+		val |= AIR_PHY_LED_ON_POLARITY;
-+	else
-+		val &= ~AIR_PHY_LED_ON_POLARITY;
-+
-+	err = phy_modify_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_ON(index),
-+			     AIR_PHY_LED_ON_ENABLE |
-+			     AIR_PHY_LED_ON_POLARITY, val);
-+
-+	if (err < 0)
-+		return err;
-+
-+	return 0;
-+}
-+
-+static int air_leds_init(struct phy_device *phydev, int num, int dur, int mode)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+	int ret, i;
-+
-+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_DUR_BLINK,
-+			    dur);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_DUR_ON,
-+			    dur >> 1);
-+	if (ret < 0)
-+		return ret;
-+
-+	switch (mode) {
-+	case AIR_LED_MODE_DISABLE:
-+		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_BCR,
-+				     AIR_PHY_LED_BCR_EXT_CTRL |
-+				     AIR_PHY_LED_BCR_MODE_MASK, 0);
-+		if (ret < 0)
-+			return ret;
-+		break;
-+	case AIR_LED_MODE_USER_DEFINE:
-+		ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_BCR,
-+				     AIR_PHY_LED_BCR_EXT_CTRL |
-+				     AIR_PHY_LED_BCR_CLK_EN,
-+				     AIR_PHY_LED_BCR_EXT_CTRL |
-+				     AIR_PHY_LED_BCR_CLK_EN);
-+		if (ret < 0)
-+			return ret;
-+		break;
-+	default:
-+		phydev_err(phydev, "LED mode %d is not supported\n", mode);
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < num; ++i) {
-+		ret = air_led_init(phydev, i, AIR_LED_ENABLE, AIR_ACTIVE_HIGH);
-+		if (ret < 0) {
-+			phydev_err(phydev, "LED%d init failed: %d\n", i, ret);
-+			return ret;
-+		}
-+		air_led_hw_control_set(phydev, i, priv->led[i].rules);
-+	}
-+
-+	return 0;
-+}
-+
-+static int en8811h_led_hw_is_supported(struct phy_device *phydev, u8 index,
-+				       unsigned long rules)
-+{
-+	if (index >= EN8811H_LED_COUNT)
-+		return -EINVAL;
-+
-+	/* All combinations of the supported triggers are allowed */
-+	if (rules & ~en8811h_led_trig)
-+		return -EOPNOTSUPP;
-+
-+	return 0;
-+};
-+
-+static int en8811h_probe(struct phy_device *phydev)
-+{
-+	struct en8811h_priv *priv;
-+	int ret;
-+
-+	priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct en8811h_priv),
-+			    GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+	phydev->priv = priv;
-+
-+	ret = en8811h_load_firmware(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* mcu has just restarted after firmware load */
-+	priv->mcu_needs_restart = false;
-+
-+	priv->led[0].rules = AIR_DEFAULT_TRIGGER_LED0;
-+	priv->led[1].rules = AIR_DEFAULT_TRIGGER_LED1;
-+	priv->led[2].rules = AIR_DEFAULT_TRIGGER_LED2;
-+
-+	/* MDIO_DEVS1/2 empty, so set mmds_present bits here */
-+	phydev->c45_ids.mmds_present |= MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
-+
-+	ret = air_leds_init(phydev, EN8811H_LED_COUNT, AIR_PHY_LED_DUR,
-+			    AIR_LED_MODE_DISABLE);
-+	if (ret < 0) {
-+		phydev_err(phydev, "Failed to disable leds: %d\n", ret);
-+		return ret;
-+	}
-+
-+	/* Configure led gpio pins as output */
-+	ret = air_buckpbus_reg_modify(phydev, EN8811H_GPIO_OUTPUT,
-+				      EN8811H_GPIO_OUTPUT_345,
-+				      EN8811H_GPIO_OUTPUT_345);
-+	if (ret < 0)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+static int en8811h_config_init(struct phy_device *phydev)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+	struct device *dev = &phydev->mdio.dev;
-+	u32 pbus_value;
-+	int ret;
-+
-+	/* If restart happened in .probe(), no need to restart now */
-+	if (priv->mcu_needs_restart) {
-+		ret = en8811h_restart_mcu(phydev);
-+		if (ret < 0)
-+			return ret;
-+	} else {
-+		/* Next calls to .config_init() mcu needs to restart */
-+		priv->mcu_needs_restart = true;
-+	}
-+
-+	/* Select mode 1, the only mode supported.
-+	 * Configures the SerDes for 2500Base-X with rate adaptation
-+	 */
-+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_MCU_CMD_1,
-+			    AIR_PHY_MCU_CMD_1_MODE1);
-+	if (ret < 0)
-+		return ret;
-+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_MCU_CMD_2,
-+			    AIR_PHY_MCU_CMD_2_MODE1);
-+	if (ret < 0)
-+		return ret;
-+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_MCU_CMD_3,
-+			    AIR_PHY_MCU_CMD_3_MODE1);
-+	if (ret < 0)
-+		return ret;
-+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_MCU_CMD_4,
-+			    AIR_PHY_MCU_CMD_4_MODE1);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Serdes polarity */
-+	pbus_value = 0;
-+	if (device_property_read_bool(dev, "airoha,pnswap-rx"))
-+		pbus_value |=  EN8811H_POLARITY_RX_REVERSE;
-+	else
-+		pbus_value &= ~EN8811H_POLARITY_RX_REVERSE;
-+	if (device_property_read_bool(dev, "airoha,pnswap-tx"))
-+		pbus_value &= ~EN8811H_POLARITY_TX_NORMAL;
-+	else
-+		pbus_value |=  EN8811H_POLARITY_TX_NORMAL;
-+	ret = air_buckpbus_reg_modify(phydev, EN8811H_POLARITY,
-+				      EN8811H_POLARITY_RX_REVERSE |
-+				      EN8811H_POLARITY_TX_NORMAL, pbus_value);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = air_leds_init(phydev, EN8811H_LED_COUNT, AIR_PHY_LED_DUR,
-+			    AIR_LED_MODE_USER_DEFINE);
-+	if (ret < 0) {
-+		phydev_err(phydev, "Failed to initialize leds: %d\n", ret);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int en8811h_get_features(struct phy_device *phydev)
-+{
-+	linkmode_set_bit_array(phy_basic_ports_array,
-+			       ARRAY_SIZE(phy_basic_ports_array),
-+			       phydev->supported);
-+
-+	return genphy_c45_pma_read_abilities(phydev);
-+}
-+
-+static int en8811h_get_rate_matching(struct phy_device *phydev,
-+				     phy_interface_t iface)
-+{
-+	return RATE_MATCH_PAUSE;
-+}
-+
-+static int en8811h_config_aneg(struct phy_device *phydev)
-+{
-+	bool changed = false;
-+	int ret;
-+	u32 adv;
-+
-+	if (phydev->autoneg == AUTONEG_DISABLE) {
-+		phydev_warn(phydev, "Disabling autoneg is not supported\n");
-+		return -EINVAL;
-+	}
-+
-+	adv = linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising);
-+
-+	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-+				     MDIO_AN_10GBT_CTRL_ADV2_5G, adv);
-+	if (ret < 0)
-+		return ret;
-+	if (ret > 0)
-+		changed = true;
-+
-+	return __genphy_config_aneg(phydev, changed);
-+}
-+
-+static int en8811h_read_status(struct phy_device *phydev)
-+{
-+	struct en8811h_priv *priv = phydev->priv;
-+	u32 pbus_value;
-+	int ret, val;
-+
-+	ret = genphy_update_link(phydev);
-+	if (ret)
-+		return ret;
-+
-+	phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED;
-+	phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED;
-+	phydev->speed = SPEED_UNKNOWN;
-+	phydev->duplex = DUPLEX_UNKNOWN;
-+	phydev->pause = 0;
-+	phydev->asym_pause = 0;
-+	phydev->rate_matching = RATE_MATCH_PAUSE;
-+
-+	ret = genphy_read_master_slave(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = genphy_read_lpa(phydev);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Get link partner 2.5GBASE-T ability from vendor register */
-+	ret = air_buckpbus_reg_read(phydev, EN8811H_2P5G_LPA, &pbus_value);
-+	if (ret < 0)
-+		return ret;
-+	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+			 phydev->lp_advertising,
-+			 pbus_value & EN8811H_2P5G_LPA_2P5G);
-+
-+	if (phydev->autoneg_complete)
-+		phy_resolve_aneg_pause(phydev);
-+
-+	if (!phydev->link)
-+		return 0;
-+
-+	/* Get real speed from vendor register */
-+	val = phy_read(phydev, AIR_AUX_CTRL_STATUS);
-+	if (val < 0)
-+		return val;
-+	switch (val & AIR_AUX_CTRL_STATUS_SPEED_MASK) {
-+	case AIR_AUX_CTRL_STATUS_SPEED_2500:
-+		phydev->speed = SPEED_2500;
-+		break;
-+	case AIR_AUX_CTRL_STATUS_SPEED_1000:
-+		phydev->speed = SPEED_1000;
-+		break;
-+	case AIR_AUX_CTRL_STATUS_SPEED_100:
-+		phydev->speed = SPEED_100;
-+		break;
-+	}
-+
-+	/* Firmware before version 24011202 has no vendor register 2P5G_LPA.
-+	 * Assume link partner advertised it if connected at 2500Mbps.
-+	 */
-+	if (priv->firmware_version < 0x24011202) {
-+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
-+				 phydev->lp_advertising,
-+				 phydev->speed == SPEED_2500);
-+	}
-+
-+	/* Only supports full duplex */
-+	phydev->duplex = DUPLEX_FULL;
-+
-+	return 0;
-+}
-+
-+static int en8811h_clear_intr(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_MCU_CMD_3,
-+			    AIR_PHY_MCU_CMD_3_DOCMD);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_MCU_CMD_4,
-+			    AIR_PHY_MCU_CMD_4_INTCLR);
-+	if (ret < 0)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+static irqreturn_t en8811h_handle_interrupt(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = en8811h_clear_intr(phydev);
-+	if (ret < 0) {
-+		phy_error(phydev);
-+		return IRQ_NONE;
-+	}
-+
-+	phy_trigger_machine(phydev);
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static struct phy_driver en8811h_driver[] = {
-+{
-+	PHY_ID_MATCH_MODEL(EN8811H_PHY_ID),
-+	.name			= "Airoha EN8811H",
-+	.probe			= en8811h_probe,
-+	.get_features		= en8811h_get_features,
-+	.config_init		= en8811h_config_init,
-+	.get_rate_matching	= en8811h_get_rate_matching,
-+	.config_aneg		= en8811h_config_aneg,
-+	.read_status		= en8811h_read_status,
-+	.config_intr		= en8811h_clear_intr,
-+	.handle_interrupt	= en8811h_handle_interrupt,
-+	.led_hw_is_supported	= en8811h_led_hw_is_supported,
-+	.read_page		= air_phy_read_page,
-+	.write_page		= air_phy_write_page,
-+	.led_blink_set		= air_led_blink_set,
-+	.led_brightness_set	= air_led_brightness_set,
-+	.led_hw_control_set	= air_led_hw_control_set,
-+	.led_hw_control_get	= air_led_hw_control_get,
-+} };
-+
-+module_phy_driver(en8811h_driver);
-+
-+static struct mdio_device_id __maybe_unused en8811h_tbl[] = {
-+	{ PHY_ID_MATCH_MODEL(EN8811H_PHY_ID) },
-+	{ }
-+};
-+
-+MODULE_DEVICE_TABLE(mdio, en8811h_tbl);
-+MODULE_FIRMWARE(EN8811H_MD32_DM);
-+MODULE_FIRMWARE(EN8811H_MD32_DSP);
-+
-+MODULE_DESCRIPTION("Airoha EN8811H PHY drivers");
-+MODULE_AUTHOR("Airoha");
-+MODULE_AUTHOR("Eric Woudstra <ericwouds@gmail.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-6.1/799-v6.10-net-phy-air_en8811h-fix-some-error-codes.patch b/target/linux/generic/backport-6.1/799-v6.10-net-phy-air_en8811h-fix-some-error-codes.patch
deleted file mode 100644
index 1bd0eefe77b5..000000000000
--- a/target/linux/generic/backport-6.1/799-v6.10-net-phy-air_en8811h-fix-some-error-codes.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 87c33315af380ca12a2e59ac94edad4fe0481b4c Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@linaro.org>
-Date: Fri, 5 Apr 2024 13:08:59 +0300
-Subject: [PATCH] net: phy: air_en8811h: fix some error codes
-
-These error paths accidentally return "ret" which is zero/success
-instead of the correct error code.
-
-Fixes: 71e79430117d ("net: phy: air_en8811h: Add the Airoha EN8811H PHY driver")
-Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
-Reviewed-by: Simon Horman <horms@kernel.org>
-Link: https://lore.kernel.org/r/7ef2e230-dfb7-4a77-8973-9e5be1a99fc2@moroto.mountain
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/air_en8811h.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/air_en8811h.c
-+++ b/drivers/net/phy/air_en8811h.c
-@@ -272,11 +272,11 @@ static int __air_buckpbus_reg_read(struc
- 
- 	pbus_data_high = __phy_read(phydev, AIR_BPBUS_RD_DATA_HIGH);
- 	if (pbus_data_high < 0)
--		return ret;
-+		return pbus_data_high;
- 
- 	pbus_data_low = __phy_read(phydev, AIR_BPBUS_RD_DATA_LOW);
- 	if (pbus_data_low < 0)
--		return ret;
-+		return pbus_data_low;
- 
- 	*pbus_data = pbus_data_low | (pbus_data_high << 16);
- 	return 0;
-@@ -323,11 +323,11 @@ static int __air_buckpbus_reg_modify(str
- 
- 	pbus_data_high = __phy_read(phydev, AIR_BPBUS_RD_DATA_HIGH);
- 	if (pbus_data_high < 0)
--		return ret;
-+		return pbus_data_high;
- 
- 	pbus_data_low = __phy_read(phydev, AIR_BPBUS_RD_DATA_LOW);
- 	if (pbus_data_low < 0)
--		return ret;
-+		return pbus_data_low;
- 
- 	pbus_data_old = pbus_data_low | (pbus_data_high << 16);
- 	pbus_data_new = (pbus_data_old & ~mask) | set;
diff --git a/target/linux/generic/backport-6.1/800-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch b/target/linux/generic/backport-6.1/800-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch
deleted file mode 100644
index 592111fb9545..000000000000
--- a/target/linux/generic/backport-6.1/800-v6.3-leds-Move-led_init_default_state_get-to-the-global-h.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 156a5bb89ca6f3edd2be0bfd0de15e575442927e Mon Sep 17 00:00:00 2001
-From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Date: Tue, 3 Jan 2023 15:12:47 +0200
-Subject: [PATCH] leds: Move led_init_default_state_get() to the global header
-
-There are users inside and outside LED framework that have implemented
-a local copy of led_init_default_state_get(). In order to deduplicate
-that, as the first step move the declaration from LED header to the
-global one.
-
-Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/20230103131256.33894-3-andriy.shevchenko@linux.intel.com
----
- drivers/leds/leds.h  | 1 -
- include/linux/leds.h | 2 ++
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/leds/leds.h
-+++ b/drivers/leds/leds.h
-@@ -27,7 +27,6 @@ ssize_t led_trigger_read(struct file *fi
- ssize_t led_trigger_write(struct file *filp, struct kobject *kobj,
- 			struct bin_attribute *bin_attr, char *buf,
- 			loff_t pos, size_t count);
--enum led_default_state led_init_default_state_get(struct fwnode_handle *fwnode);
- 
- extern struct rw_semaphore leds_list_lock;
- extern struct list_head leds_list;
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -63,6 +63,8 @@ struct led_init_data {
- 	bool devname_mandatory;
- };
- 
-+enum led_default_state led_init_default_state_get(struct fwnode_handle *fwnode);
-+
- struct led_hw_trigger_type {
- 	int dummy;
- };
diff --git a/target/linux/generic/backport-6.1/801-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch b/target/linux/generic/backport-6.1/801-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch
deleted file mode 100644
index f6a025fa12a3..000000000000
--- a/target/linux/generic/backport-6.1/801-v6.4-01-net-dsa-qca8k-move-qca8k_port_to_phy-to-header.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 3e8b4d6277fd19d98c817576954dd6a4ff3caa2b Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 17 Apr 2023 17:17:23 +0200
-Subject: [PATCH 1/9] net: dsa: qca8k: move qca8k_port_to_phy() to header
-
-Move qca8k_port_to_phy() to qca8k header as it's useful for future
-reference in Switch LEDs module since the same logic is applied to get
-the right index of the switch port.
-Make it inline as it's simple function that just decrease the port.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 15 ---------------
- drivers/net/dsa/qca/qca8k.h      | 14 ++++++++++++++
- 2 files changed, 14 insertions(+), 15 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -789,21 +789,6 @@ err_clear_skb:
- 	return ret;
- }
- 
--static u32
--qca8k_port_to_phy(int port)
--{
--	/* From Andrew Lunn:
--	 * Port 0 has no internal phy.
--	 * Port 1 has an internal PHY at MDIO address 0.
--	 * Port 2 has an internal PHY at MDIO address 1.
--	 * ...
--	 * Port 5 has an internal PHY at MDIO address 4.
--	 * Port 6 has no internal PHY.
--	 */
--
--	return port - 1;
--}
--
- static int
- qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask)
- {
---- a/drivers/net/dsa/qca/qca8k.h
-+++ b/drivers/net/dsa/qca/qca8k.h
-@@ -421,6 +421,20 @@ struct qca8k_fdb {
- 	u8 mac[6];
- };
- 
-+static inline u32 qca8k_port_to_phy(int port)
-+{
-+	/* From Andrew Lunn:
-+	 * Port 0 has no internal phy.
-+	 * Port 1 has an internal PHY at MDIO address 0.
-+	 * Port 2 has an internal PHY at MDIO address 1.
-+	 * ...
-+	 * Port 5 has an internal PHY at MDIO address 4.
-+	 * Port 6 has no internal PHY.
-+	 */
-+
-+	return port - 1;
-+}
-+
- /* Common setup function */
- extern const struct qca8k_mib_desc ar8327_mib[];
- extern const struct regmap_access_table qca8k_readable_table;
diff --git a/target/linux/generic/backport-6.1/801-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch b/target/linux/generic/backport-6.1/801-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch
deleted file mode 100644
index 409fe9c7a19c..000000000000
--- a/target/linux/generic/backport-6.1/801-v6.4-02-net-dsa-qca8k-add-LEDs-basic-support.patch
+++ /dev/null
@@ -1,435 +0,0 @@
-From 1e264f9d2918b5737023c44a23ae04def1095210 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 17 Apr 2023 17:17:24 +0200
-Subject: [PATCH 2/9] net: dsa: qca8k: add LEDs basic support
-
-Add LEDs basic support for qca8k Switch Family by adding basic
-brightness_set() support.
-
-Since these LEDs refelect port status, the default label is set to
-":port". DT binding should describe the color and function of the
-LEDs using standard LEDs api.
-Each LED always have the device name as prefix. The device name is
-composed from the mii bus id and the PHY addr resulting in example
-names like:
-- qca8k-0.0:00:amber:lan
-- qca8k-0.0:00:white:lan
-- qca8k-0.0:01:amber:lan
-- qca8k-0.0:01:white:lan
-
-These LEDs supports only blocking variant of the brightness_set()
-function since they can sleep during access of the switch leds to set
-the brightness.
-
-While at it add to the qca8k header file each mode defined by the Switch
-Documentation for future use.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/Kconfig      |   8 ++
- drivers/net/dsa/qca/Makefile     |   3 +
- drivers/net/dsa/qca/qca8k-8xxx.c |   5 +
- drivers/net/dsa/qca/qca8k-leds.c | 239 +++++++++++++++++++++++++++++++
- drivers/net/dsa/qca/qca8k.h      |  60 ++++++++
- drivers/net/dsa/qca/qca8k_leds.h |  16 +++
- 6 files changed, 331 insertions(+)
- create mode 100644 drivers/net/dsa/qca/qca8k-leds.c
- create mode 100644 drivers/net/dsa/qca/qca8k_leds.h
-
---- a/drivers/net/dsa/qca/Kconfig
-+++ b/drivers/net/dsa/qca/Kconfig
-@@ -15,3 +15,11 @@ config NET_DSA_QCA8K
- 	help
- 	  This enables support for the Qualcomm Atheros QCA8K Ethernet
- 	  switch chips.
-+
-+config NET_DSA_QCA8K_LEDS_SUPPORT
-+	bool "Qualcomm Atheros QCA8K Ethernet switch family LEDs support"
-+	depends on NET_DSA_QCA8K
-+	depends on LEDS_CLASS
-+	help
-+	  This enabled support for LEDs present on the Qualcomm Atheros
-+	  QCA8K Ethernet switch chips.
---- a/drivers/net/dsa/qca/Makefile
-+++ b/drivers/net/dsa/qca/Makefile
-@@ -2,3 +2,6 @@
- obj-$(CONFIG_NET_DSA_AR9331)	+= ar9331.o
- obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
- qca8k-y 			+= qca8k-common.o qca8k-8xxx.o
-+ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT
-+qca8k-y				+= qca8k-leds.o
-+endif
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -22,6 +22,7 @@
- #include <linux/dsa/tag_qca.h>
- 
- #include "qca8k.h"
-+#include "qca8k_leds.h"
- 
- static void
- qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
-@@ -1851,6 +1852,10 @@ qca8k_setup(struct dsa_switch *ds)
- 	if (ret)
- 		return ret;
- 
-+	ret = qca8k_setup_led_ctrl(priv);
-+	if (ret)
-+		return ret;
-+
- 	qca8k_setup_pcs(priv, &priv->pcs_port_0, 0);
- 	qca8k_setup_pcs(priv, &priv->pcs_port_6, 6);
- 
---- /dev/null
-+++ b/drivers/net/dsa/qca/qca8k-leds.c
-@@ -0,0 +1,239 @@
-+// SPDX-License-Identifier: GPL-2.0
-+#include <linux/regmap.h>
-+#include <net/dsa.h>
-+
-+#include "qca8k.h"
-+#include "qca8k_leds.h"
-+
-+static int
-+qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info)
-+{
-+	switch (port_num) {
-+	case 0:
-+		reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
-+		reg_info->shift = QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT;
-+		break;
-+	case 1:
-+	case 2:
-+	case 3:
-+		/* Port 123 are controlled on a different reg */
-+		reg_info->reg = QCA8K_LED_CTRL3_REG;
-+		reg_info->shift = QCA8K_LED_PHY123_PATTERN_EN_SHIFT(port_num, led_num);
-+		break;
-+	case 4:
-+		reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
-+		reg_info->shift = QCA8K_LED_PHY4_CONTROL_RULE_SHIFT;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int
-+qca8k_led_brightness_set(struct qca8k_led *led,
-+			 enum led_brightness brightness)
-+{
-+	struct qca8k_led_pattern_en reg_info;
-+	struct qca8k_priv *priv = led->priv;
-+	u32 mask, val;
-+
-+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
-+
-+	val = QCA8K_LED_ALWAYS_OFF;
-+	if (brightness)
-+		val = QCA8K_LED_ALWAYS_ON;
-+
-+	/* HW regs to control brightness is special and port 1-2-3
-+	 * are placed in a different reg.
-+	 *
-+	 * To control port 0 brightness:
-+	 * - the 2 bit (15, 14) of:
-+	 *   - QCA8K_LED_CTRL0_REG for led1
-+	 *   - QCA8K_LED_CTRL1_REG for led2
-+	 *   - QCA8K_LED_CTRL2_REG for led3
-+	 *
-+	 * To control port 4:
-+	 * - the 2 bit (31, 30) of:
-+	 *   - QCA8K_LED_CTRL0_REG for led1
-+	 *   - QCA8K_LED_CTRL1_REG for led2
-+	 *   - QCA8K_LED_CTRL2_REG for led3
-+	 *
-+	 * To control port 1:
-+	 *   - the 2 bit at (9, 8) of QCA8K_LED_CTRL3_REG are used for led1
-+	 *   - the 2 bit at (11, 10) of QCA8K_LED_CTRL3_REG are used for led2
-+	 *   - the 2 bit at (13, 12) of QCA8K_LED_CTRL3_REG are used for led3
-+	 *
-+	 * To control port 2:
-+	 *   - the 2 bit at (15, 14) of QCA8K_LED_CTRL3_REG are used for led1
-+	 *   - the 2 bit at (17, 16) of QCA8K_LED_CTRL3_REG are used for led2
-+	 *   - the 2 bit at (19, 18) of QCA8K_LED_CTRL3_REG are used for led3
-+	 *
-+	 * To control port 3:
-+	 *   - the 2 bit at (21, 20) of QCA8K_LED_CTRL3_REG are used for led1
-+	 *   - the 2 bit at (23, 22) of QCA8K_LED_CTRL3_REG are used for led2
-+	 *   - the 2 bit at (25, 24) of QCA8K_LED_CTRL3_REG are used for led3
-+	 *
-+	 * To abstract this and have less code, we use the port and led numm
-+	 * to calculate the shift and the correct reg due to this problem of
-+	 * not having a 1:1 map of LED with the regs.
-+	 */
-+	if (led->port_num == 0 || led->port_num == 4) {
-+		mask = QCA8K_LED_PATTERN_EN_MASK;
-+		val <<= QCA8K_LED_PATTERN_EN_SHIFT;
-+	} else {
-+		mask = QCA8K_LED_PHY123_PATTERN_EN_MASK;
-+	}
-+
-+	return regmap_update_bits(priv->regmap, reg_info.reg,
-+				  mask << reg_info.shift,
-+				  val << reg_info.shift);
-+}
-+
-+static int
-+qca8k_cled_brightness_set_blocking(struct led_classdev *ldev,
-+				   enum led_brightness brightness)
-+{
-+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
-+
-+	return qca8k_led_brightness_set(led, brightness);
-+}
-+
-+static enum led_brightness
-+qca8k_led_brightness_get(struct qca8k_led *led)
-+{
-+	struct qca8k_led_pattern_en reg_info;
-+	struct qca8k_priv *priv = led->priv;
-+	u32 val;
-+	int ret;
-+
-+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
-+
-+	ret = regmap_read(priv->regmap, reg_info.reg, &val);
-+	if (ret)
-+		return 0;
-+
-+	val >>= reg_info.shift;
-+
-+	if (led->port_num == 0 || led->port_num == 4) {
-+		val &= QCA8K_LED_PATTERN_EN_MASK;
-+		val >>= QCA8K_LED_PATTERN_EN_SHIFT;
-+	} else {
-+		val &= QCA8K_LED_PHY123_PATTERN_EN_MASK;
-+	}
-+
-+	/* Assume brightness ON only when the LED is set to always ON */
-+	return val == QCA8K_LED_ALWAYS_ON;
-+}
-+
-+static int
-+qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num)
-+{
-+	struct fwnode_handle *led = NULL, *leds = NULL;
-+	struct led_init_data init_data = { };
-+	struct dsa_switch *ds = priv->ds;
-+	enum led_default_state state;
-+	struct qca8k_led *port_led;
-+	int led_num, led_index;
-+	int ret;
-+
-+	leds = fwnode_get_named_child_node(port, "leds");
-+	if (!leds) {
-+		dev_dbg(priv->dev, "No Leds node specified in device tree for port %d!\n",
-+			port_num);
-+		return 0;
-+	}
-+
-+	fwnode_for_each_child_node(leds, led) {
-+		/* Reg represent the led number of the port.
-+		 * Each port can have at most 3 leds attached
-+		 * Commonly:
-+		 * 1. is gigabit led
-+		 * 2. is mbit led
-+		 * 3. additional status led
-+		 */
-+		if (fwnode_property_read_u32(led, "reg", &led_num))
-+			continue;
-+
-+		if (led_num >= QCA8K_LED_PORT_COUNT) {
-+			dev_warn(priv->dev, "Invalid LED reg %d defined for port %d",
-+				 led_num, port_num);
-+			continue;
-+		}
-+
-+		led_index = QCA8K_LED_PORT_INDEX(port_num, led_num);
-+
-+		port_led = &priv->ports_led[led_index];
-+		port_led->port_num = port_num;
-+		port_led->led_num = led_num;
-+		port_led->priv = priv;
-+
-+		state = led_init_default_state_get(led);
-+		switch (state) {
-+		case LEDS_DEFSTATE_ON:
-+			port_led->cdev.brightness = 1;
-+			qca8k_led_brightness_set(port_led, 1);
-+			break;
-+		case LEDS_DEFSTATE_KEEP:
-+			port_led->cdev.brightness =
-+					qca8k_led_brightness_get(port_led);
-+			break;
-+		default:
-+			port_led->cdev.brightness = 0;
-+			qca8k_led_brightness_set(port_led, 0);
-+		}
-+
-+		port_led->cdev.max_brightness = 1;
-+		port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking;
-+		init_data.default_label = ":port";
-+		init_data.fwnode = led;
-+		init_data.devname_mandatory = true;
-+		init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d", ds->slave_mii_bus->id,
-+						 port_num);
-+		if (!init_data.devicename)
-+			return -ENOMEM;
-+
-+		ret = devm_led_classdev_register_ext(priv->dev, &port_led->cdev, &init_data);
-+		if (ret)
-+			dev_warn(priv->dev, "Failed to init LED %d for port %d", led_num, port_num);
-+
-+		kfree(init_data.devicename);
-+	}
-+
-+	return 0;
-+}
-+
-+int
-+qca8k_setup_led_ctrl(struct qca8k_priv *priv)
-+{
-+	struct fwnode_handle *ports, *port;
-+	int port_num;
-+	int ret;
-+
-+	ports = device_get_named_child_node(priv->dev, "ports");
-+	if (!ports) {
-+		dev_info(priv->dev, "No ports node specified in device tree!");
-+		return 0;
-+	}
-+
-+	fwnode_for_each_child_node(ports, port) {
-+		if (fwnode_property_read_u32(port, "reg", &port_num))
-+			continue;
-+
-+		/* Skip checking for CPU port 0 and CPU port 6 as not supported */
-+		if (port_num == 0 || port_num == 6)
-+			continue;
-+
-+		/* Each port can have at most 3 different leds attached.
-+		 * Switch port starts from 0 to 6, but port 0 and 6 are CPU
-+		 * port. The port index needs to be decreased by one to identify
-+		 * the correct port for LED setup.
-+		 */
-+		ret = qca8k_parse_port_leds(priv, port, qca8k_port_to_phy(port_num));
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
---- a/drivers/net/dsa/qca/qca8k.h
-+++ b/drivers/net/dsa/qca/qca8k.h
-@@ -11,6 +11,7 @@
- #include <linux/delay.h>
- #include <linux/regmap.h>
- #include <linux/gpio.h>
-+#include <linux/leds.h>
- #include <linux/dsa/tag_qca.h>
- 
- #define QCA8K_ETHERNET_MDIO_PRIORITY			7
-@@ -85,6 +86,51 @@
- #define   QCA8K_MDIO_MASTER_DATA(x)			FIELD_PREP(QCA8K_MDIO_MASTER_DATA_MASK, x)
- #define   QCA8K_MDIO_MASTER_MAX_PORTS			5
- #define   QCA8K_MDIO_MASTER_MAX_REG			32
-+
-+/* LED control register */
-+#define QCA8K_LED_PORT_COUNT				3
-+#define QCA8K_LED_COUNT					((QCA8K_NUM_PORTS - QCA8K_NUM_CPU_PORTS) * QCA8K_LED_PORT_COUNT)
-+#define QCA8K_LED_RULE_COUNT				6
-+#define QCA8K_LED_RULE_MAX				11
-+#define QCA8K_LED_PORT_INDEX(_phy, _led)		(((_phy) * QCA8K_LED_PORT_COUNT) + (_led))
-+
-+#define QCA8K_LED_PHY123_PATTERN_EN_SHIFT(_phy, _led)	((((_phy) - 1) * 6) + 8 + (2 * (_led)))
-+#define QCA8K_LED_PHY123_PATTERN_EN_MASK		GENMASK(1, 0)
-+
-+#define QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT		0
-+#define QCA8K_LED_PHY4_CONTROL_RULE_SHIFT		16
-+
-+#define QCA8K_LED_CTRL_REG(_i)				(0x050 + (_i) * 4)
-+#define QCA8K_LED_CTRL0_REG				0x50
-+#define QCA8K_LED_CTRL1_REG				0x54
-+#define QCA8K_LED_CTRL2_REG				0x58
-+#define QCA8K_LED_CTRL3_REG				0x5C
-+#define   QCA8K_LED_CTRL_SHIFT(_i)			(((_i) % 2) * 16)
-+#define   QCA8K_LED_CTRL_MASK				GENMASK(15, 0)
-+#define QCA8K_LED_RULE_MASK				GENMASK(13, 0)
-+#define QCA8K_LED_BLINK_FREQ_MASK			GENMASK(1, 0)
-+#define QCA8K_LED_BLINK_FREQ_SHITF			0
-+#define   QCA8K_LED_BLINK_2HZ				0
-+#define   QCA8K_LED_BLINK_4HZ				1
-+#define   QCA8K_LED_BLINK_8HZ				2
-+#define   QCA8K_LED_BLINK_AUTO				3
-+#define QCA8K_LED_LINKUP_OVER_MASK			BIT(2)
-+#define QCA8K_LED_TX_BLINK_MASK				BIT(4)
-+#define QCA8K_LED_RX_BLINK_MASK				BIT(5)
-+#define QCA8K_LED_COL_BLINK_MASK			BIT(7)
-+#define QCA8K_LED_LINK_10M_EN_MASK			BIT(8)
-+#define QCA8K_LED_LINK_100M_EN_MASK			BIT(9)
-+#define QCA8K_LED_LINK_1000M_EN_MASK			BIT(10)
-+#define QCA8K_LED_POWER_ON_LIGHT_MASK			BIT(11)
-+#define QCA8K_LED_HALF_DUPLEX_MASK			BIT(12)
-+#define QCA8K_LED_FULL_DUPLEX_MASK			BIT(13)
-+#define QCA8K_LED_PATTERN_EN_MASK			GENMASK(15, 14)
-+#define QCA8K_LED_PATTERN_EN_SHIFT			14
-+#define   QCA8K_LED_ALWAYS_OFF				0
-+#define   QCA8K_LED_ALWAYS_BLINK_4HZ			1
-+#define   QCA8K_LED_ALWAYS_ON				2
-+#define   QCA8K_LED_RULE_CONTROLLED			3
-+
- #define QCA8K_GOL_MAC_ADDR0				0x60
- #define QCA8K_GOL_MAC_ADDR1				0x64
- #define QCA8K_MAX_FRAME_SIZE				0x78
-@@ -382,6 +428,19 @@ struct qca8k_pcs {
- 	int port;
- };
- 
-+struct qca8k_led_pattern_en {
-+	u32 reg;
-+	u8 shift;
-+};
-+
-+struct qca8k_led {
-+	u8 port_num;
-+	u8 led_num;
-+	u16 old_rule;
-+	struct qca8k_priv *priv;
-+	struct led_classdev cdev;
-+};
-+
- struct qca8k_priv {
- 	u8 switch_id;
- 	u8 switch_revision;
-@@ -406,6 +465,7 @@ struct qca8k_priv {
- 	struct qca8k_pcs pcs_port_0;
- 	struct qca8k_pcs pcs_port_6;
- 	const struct qca8k_match_data *info;
-+	struct qca8k_led ports_led[QCA8K_LED_COUNT];
- };
- 
- struct qca8k_mib_desc {
---- /dev/null
-+++ b/drivers/net/dsa/qca/qca8k_leds.h
-@@ -0,0 +1,16 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#ifndef __QCA8K_LEDS_H
-+#define __QCA8K_LEDS_H
-+
-+/* Leds Support function */
-+#ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT
-+int qca8k_setup_led_ctrl(struct qca8k_priv *priv);
-+#else
-+static inline int qca8k_setup_led_ctrl(struct qca8k_priv *priv)
-+{
-+	return 0;
-+}
-+#endif
-+
-+#endif /* __QCA8K_LEDS_H */
diff --git a/target/linux/generic/backport-6.1/801-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch b/target/linux/generic/backport-6.1/801-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch
deleted file mode 100644
index 231c4156df8e..000000000000
--- a/target/linux/generic/backport-6.1/801-v6.4-03-net-dsa-qca8k-add-LEDs-blink_set-support.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 91acadcc6e599dfc62717abcdad58a459cfb1684 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 17 Apr 2023 17:17:25 +0200
-Subject: [PATCH 3/9] net: dsa: qca8k: add LEDs blink_set() support
-
-Add LEDs blink_set() support to qca8k Switch Family.
-These LEDs support hw accellerated blinking at a fixed rate
-of 4Hz.
-
-Reject any other value since not supported by the LEDs switch.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Pavel Machek <pavel@ucw.cz>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-leds.c | 38 ++++++++++++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/drivers/net/dsa/qca/qca8k-leds.c
-+++ b/drivers/net/dsa/qca/qca8k-leds.c
-@@ -128,6 +128,43 @@ qca8k_led_brightness_get(struct qca8k_le
- }
- 
- static int
-+qca8k_cled_blink_set(struct led_classdev *ldev,
-+		     unsigned long *delay_on,
-+		     unsigned long *delay_off)
-+{
-+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
-+	u32 mask, val = QCA8K_LED_ALWAYS_BLINK_4HZ;
-+	struct qca8k_led_pattern_en reg_info;
-+	struct qca8k_priv *priv = led->priv;
-+
-+	if (*delay_on == 0 && *delay_off == 0) {
-+		*delay_on = 125;
-+		*delay_off = 125;
-+	}
-+
-+	if (*delay_on != 125 || *delay_off != 125) {
-+		/* The hardware only supports blinking at 4Hz. Fall back
-+		 * to software implementation in other cases.
-+		 */
-+		return -EINVAL;
-+	}
-+
-+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
-+
-+	if (led->port_num == 0 || led->port_num == 4) {
-+		mask = QCA8K_LED_PATTERN_EN_MASK;
-+		val <<= QCA8K_LED_PATTERN_EN_SHIFT;
-+	} else {
-+		mask = QCA8K_LED_PHY123_PATTERN_EN_MASK;
-+	}
-+
-+	regmap_update_bits(priv->regmap, reg_info.reg, mask << reg_info.shift,
-+			   val << reg_info.shift);
-+
-+	return 0;
-+}
-+
-+static int
- qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num)
- {
- 	struct fwnode_handle *led = NULL, *leds = NULL;
-@@ -186,6 +223,7 @@ qca8k_parse_port_leds(struct qca8k_priv
- 
- 		port_led->cdev.max_brightness = 1;
- 		port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking;
-+		port_led->cdev.blink_set = qca8k_cled_blink_set;
- 		init_data.default_label = ":port";
- 		init_data.fwnode = led;
- 		init_data.devname_mandatory = true;
diff --git a/target/linux/generic/backport-6.1/801-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch b/target/linux/generic/backport-6.1/801-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch
deleted file mode 100644
index bc905b4468c1..000000000000
--- a/target/linux/generic/backport-6.1/801-v6.4-04-leds-Provide-stubs-for-when-CLASS_LED-NEW_LEDS-are-d.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From e5029edd53937a29801ef507cee12e657ff31ea9 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 17 Apr 2023 17:17:26 +0200
-Subject: [PATCH 4/9] leds: Provide stubs for when CLASS_LED & NEW_LEDS are
- disabled
-
-Provide stubs for devm_led_classdev_register_ext() and
-led_init_default_state_get() so that LED drivers embedded within other
-drivers such as PHYs and Ethernet switches still build when LEDS_CLASS
-or NEW_LEDS are disabled. This also helps with Kconfig dependencies,
-which are somewhat hairy for phylib and mdio and only get worse when
-adding a dependency on LED_CLASS.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/linux/leds.h | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -63,7 +63,15 @@ struct led_init_data {
- 	bool devname_mandatory;
- };
- 
-+#if IS_ENABLED(CONFIG_NEW_LEDS)
- enum led_default_state led_init_default_state_get(struct fwnode_handle *fwnode);
-+#else
-+static inline enum led_default_state
-+led_init_default_state_get(struct fwnode_handle *fwnode)
-+{
-+	return LEDS_DEFSTATE_OFF;
-+}
-+#endif
- 
- struct led_hw_trigger_type {
- 	int dummy;
-@@ -198,9 +206,19 @@ static inline int led_classdev_register(
- 	return led_classdev_register_ext(parent, led_cdev, NULL);
- }
- 
-+#if IS_ENABLED(CONFIG_LEDS_CLASS)
- int devm_led_classdev_register_ext(struct device *parent,
- 					  struct led_classdev *led_cdev,
- 					  struct led_init_data *init_data);
-+#else
-+static inline int
-+devm_led_classdev_register_ext(struct device *parent,
-+			       struct led_classdev *led_cdev,
-+			       struct led_init_data *init_data)
-+{
-+	return 0;
-+}
-+#endif
- 
- static inline int devm_led_classdev_register(struct device *parent,
- 					     struct led_classdev *led_cdev)
diff --git a/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch b/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch
deleted file mode 100644
index 0d2c0bcd83f2..000000000000
--- a/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch
+++ /dev/null
@@ -1,191 +0,0 @@
-From 01e5b728e9e43ae444e0369695a5f72209906464 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 17 Apr 2023 17:17:27 +0200
-Subject: [PATCH 5/9] net: phy: Add a binding for PHY LEDs
-
-Define common binding parsing for all PHY drivers with LEDs using
-phylib. Parse the DT as part of the phy_probe and add LEDs to the
-linux LED class infrastructure. For the moment, provide a dummy
-brightness function, which will later be replaced with a call into the
-PHY driver. This allows testing since the LED core might otherwise
-reject an LED whose brightness cannot be set.
-
-Add a dependency on LED_CLASS. It either needs to be built in, or not
-enabled, since a modular build can result in linker errors.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/Kconfig      |  1 +
- drivers/net/phy/phy_device.c | 76 ++++++++++++++++++++++++++++++++++++
- include/linux/phy.h          | 16 ++++++++
- 3 files changed, 93 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -18,6 +18,7 @@ menuconfig PHYLIB
- 	depends on NETDEVICES
- 	select MDIO_DEVICE
- 	select MDIO_DEVRES
-+	depends on LEDS_CLASS || LEDS_CLASS=n
- 	help
- 	  Ethernet controllers are usually attached to PHY
- 	  devices.  This option provides infrastructure for
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -19,10 +19,12 @@
- #include <linux/interrupt.h>
- #include <linux/io.h>
- #include <linux/kernel.h>
-+#include <linux/list.h>
- #include <linux/mdio.h>
- #include <linux/mii.h>
- #include <linux/mm.h>
- #include <linux/module.h>
-+#include <linux/of.h>
- #include <linux/netdevice.h>
- #include <linux/phy.h>
- #include <linux/phy_led_triggers.h>
-@@ -642,6 +644,7 @@ struct phy_device *phy_device_create(str
- 	device_initialize(&mdiodev->dev);
- 
- 	dev->state = PHY_DOWN;
-+	INIT_LIST_HEAD(&dev->leds);
- 
- 	mutex_init(&dev->lock);
- 	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
-@@ -3035,6 +3038,74 @@ static bool phy_drv_supports_irq(struct
- 	return phydrv->config_intr && phydrv->handle_interrupt;
- }
- 
-+/* Dummy implementation until calls into PHY driver are added */
-+static int phy_led_set_brightness(struct led_classdev *led_cdev,
-+				  enum led_brightness value)
-+{
-+	return 0;
-+}
-+
-+static int of_phy_led(struct phy_device *phydev,
-+		      struct device_node *led)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	struct led_init_data init_data = {};
-+	struct led_classdev *cdev;
-+	struct phy_led *phyled;
-+	int err;
-+
-+	phyled = devm_kzalloc(dev, sizeof(*phyled), GFP_KERNEL);
-+	if (!phyled)
-+		return -ENOMEM;
-+
-+	cdev = &phyled->led_cdev;
-+
-+	err = of_property_read_u8(led, "reg", &phyled->index);
-+	if (err)
-+		return err;
-+
-+	cdev->brightness_set_blocking = phy_led_set_brightness;
-+	cdev->max_brightness = 1;
-+	init_data.devicename = dev_name(&phydev->mdio.dev);
-+	init_data.fwnode = of_fwnode_handle(led);
-+	init_data.devname_mandatory = true;
-+
-+	err = devm_led_classdev_register_ext(dev, cdev, &init_data);
-+	if (err)
-+		return err;
-+
-+	list_add(&phyled->list, &phydev->leds);
-+
-+	return 0;
-+}
-+
-+static int of_phy_leds(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	struct device_node *leds, *led;
-+	int err;
-+
-+	if (!IS_ENABLED(CONFIG_OF_MDIO))
-+		return 0;
-+
-+	if (!node)
-+		return 0;
-+
-+	leds = of_get_child_by_name(node, "leds");
-+	if (!leds)
-+		return 0;
-+
-+	for_each_available_child_of_node(leds, led) {
-+		err = of_phy_led(phydev, led);
-+		if (err) {
-+			of_node_put(led);
-+			return err;
-+		}
-+	}
-+
-+	return 0;
-+}
-+
- /**
-  * fwnode_mdio_find_device - Given a fwnode, find the mdio_device
-  * @fwnode: pointer to the mdio_device's fwnode
-@@ -3213,6 +3284,11 @@ static int phy_probe(struct device *dev)
- 	/* Set the state to READY by default */
- 	phydev->state = PHY_READY;
- 
-+	/* Get the LEDs from the device tree, and instantiate standard
-+	 * LEDs for them.
-+	 */
-+	err = of_phy_leds(phydev);
-+
- out:
- 	/* Re-assert the reset signal on error */
- 	if (err)
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -14,6 +14,7 @@
- #include <linux/compiler.h>
- #include <linux/spinlock.h>
- #include <linux/ethtool.h>
-+#include <linux/leds.h>
- #include <linux/linkmode.h>
- #include <linux/netlink.h>
- #include <linux/mdio.h>
-@@ -606,6 +607,7 @@ struct macsec_ops;
-  * @phy_num_led_triggers: Number of triggers in @phy_led_triggers
-  * @led_link_trigger: LED trigger for link up/down
-  * @last_triggered: last LED trigger for link speed
-+ * @leds: list of PHY LED structures
-  * @master_slave_set: User requested master/slave configuration
-  * @master_slave_get: Current master/slave advertisement
-  * @master_slave_state: Current master/slave configuration
-@@ -698,6 +700,7 @@ struct phy_device {
- 
- 	struct phy_led_trigger *led_link_trigger;
- #endif
-+	struct list_head leds;
- 
- 	/*
- 	 * Interrupt number for this PHY
-@@ -772,6 +775,19 @@ struct phy_tdr_config {
- #define PHY_PAIR_ALL -1
- 
- /**
-+ * struct phy_led: An LED driven by the PHY
-+ *
-+ * @list: List of LEDs
-+ * @led_cdev: Standard LED class structure
-+ * @index: Number of the LED
-+ */
-+struct phy_led {
-+	struct list_head list;
-+	struct led_classdev led_cdev;
-+	u8 index;
-+};
-+
-+/**
-  * struct phy_driver - Driver structure for a particular PHY type
-  *
-  * @mdiodrv: Data common to all MDIO devices
diff --git a/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch
deleted file mode 100644
index 4873c40a7766..000000000000
--- a/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 684818189b04b095b34964ed4a3ea5249a840eab Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 17 Apr 2023 17:17:28 +0200
-Subject: [PATCH 6/9] net: phy: phy_device: Call into the PHY driver to set LED
- brightness
-
-Linux LEDs can be software controlled via the brightness file in /sys.
-LED drivers need to implement a brightness_set function which the core
-will call. Implement an intermediary in phy_device, which will call
-into the phy driver if it implements the necessary function.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy_device.c | 15 ++++++++++++---
- include/linux/phy.h          | 13 +++++++++++++
- 2 files changed, 25 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -3038,11 +3038,18 @@ static bool phy_drv_supports_irq(struct
- 	return phydrv->config_intr && phydrv->handle_interrupt;
- }
- 
--/* Dummy implementation until calls into PHY driver are added */
- static int phy_led_set_brightness(struct led_classdev *led_cdev,
- 				  enum led_brightness value)
- {
--	return 0;
-+	struct phy_led *phyled = to_phy_led(led_cdev);
-+	struct phy_device *phydev = phyled->phydev;
-+	int err;
-+
-+	mutex_lock(&phydev->lock);
-+	err = phydev->drv->led_brightness_set(phydev, phyled->index, value);
-+	mutex_unlock(&phydev->lock);
-+
-+	return err;
- }
- 
- static int of_phy_led(struct phy_device *phydev,
-@@ -3059,12 +3066,14 @@ static int of_phy_led(struct phy_device
- 		return -ENOMEM;
- 
- 	cdev = &phyled->led_cdev;
-+	phyled->phydev = phydev;
- 
- 	err = of_property_read_u8(led, "reg", &phyled->index);
- 	if (err)
- 		return err;
- 
--	cdev->brightness_set_blocking = phy_led_set_brightness;
-+	if (phydev->drv->led_brightness_set)
-+		cdev->brightness_set_blocking = phy_led_set_brightness;
- 	cdev->max_brightness = 1;
- 	init_data.devicename = dev_name(&phydev->mdio.dev);
- 	init_data.fwnode = of_fwnode_handle(led);
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -778,15 +778,19 @@ struct phy_tdr_config {
-  * struct phy_led: An LED driven by the PHY
-  *
-  * @list: List of LEDs
-+ * @phydev: PHY this LED is attached to
-  * @led_cdev: Standard LED class structure
-  * @index: Number of the LED
-  */
- struct phy_led {
- 	struct list_head list;
-+	struct phy_device *phydev;
- 	struct led_classdev led_cdev;
- 	u8 index;
- };
- 
-+#define to_phy_led(d) container_of(d, struct phy_led, led_cdev)
-+
- /**
-  * struct phy_driver - Driver structure for a particular PHY type
-  *
-@@ -1001,6 +1005,15 @@ struct phy_driver {
- 	int (*get_sqi)(struct phy_device *dev);
- 	/** @get_sqi_max: Get the maximum signal quality indication */
- 	int (*get_sqi_max)(struct phy_device *dev);
-+
-+	/**
-+	 * @led_brightness_set: Set a PHY LED brightness. Index
-+	 * indicates which of the PHYs led should be set. Value
-+	 * follows the standard LED class meaning, e.g. LED_OFF,
-+	 * LED_HALF, LED_FULL.
-+	 */
-+	int (*led_brightness_set)(struct phy_device *dev,
-+				  u8 index, enum led_brightness value);
- };
- #define to_phy_driver(d) container_of(to_mdio_common_driver(d),		\
- 				      struct phy_driver, mdiodrv)
diff --git a/target/linux/generic/backport-6.1/801-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch b/target/linux/generic/backport-6.1/801-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch
deleted file mode 100644
index 5114c0e6da21..000000000000
--- a/target/linux/generic/backport-6.1/801-v6.4-07-net-phy-marvell-Add-software-control-of-the-LEDs.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 2d3960e58ef7c83fe1dbf952f056b9e906cb6df8 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 17 Apr 2023 17:17:29 +0200
-Subject: [PATCH 7/9] net: phy: marvell: Add software control of the LEDs
-
-Add a brightness function, so the LEDs can be controlled from
-software using the standard Linux LED infrastructure.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/marvell.c | 45 ++++++++++++++++++++++++++++++++++-----
- 1 file changed, 40 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/marvell.c
-+++ b/drivers/net/phy/marvell.c
-@@ -144,11 +144,13 @@
- /* WOL Event Interrupt Enable */
- #define MII_88E1318S_PHY_CSIER_WOL_EIE			BIT(7)
- 
--/* LED Timer Control Register */
--#define MII_88E1318S_PHY_LED_TCR			0x12
--#define MII_88E1318S_PHY_LED_TCR_FORCE_INT		BIT(15)
--#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE		BIT(7)
--#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW		BIT(11)
-+#define MII_88E1318S_PHY_LED_FUNC		0x10
-+#define MII_88E1318S_PHY_LED_FUNC_OFF		(0x8)
-+#define MII_88E1318S_PHY_LED_FUNC_ON		(0x9)
-+#define MII_88E1318S_PHY_LED_TCR		0x12
-+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT	BIT(15)
-+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE	BIT(7)
-+#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW	BIT(11)
- 
- /* Magic Packet MAC address registers */
- #define MII_88E1318S_PHY_MAGIC_PACKET_WORD2		0x17
-@@ -2832,6 +2834,34 @@ static int marvell_hwmon_probe(struct ph
- }
- #endif
- 
-+static int m88e1318_led_brightness_set(struct phy_device *phydev,
-+				       u8 index, enum led_brightness value)
-+{
-+	int reg;
-+
-+	reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE,
-+			     MII_88E1318S_PHY_LED_FUNC);
-+	if (reg < 0)
-+		return reg;
-+
-+	switch (index) {
-+	case 0:
-+	case 1:
-+	case 2:
-+		reg &= ~(0xf << (4 * index));
-+		if (value == LED_OFF)
-+			reg |= MII_88E1318S_PHY_LED_FUNC_OFF << (4 * index);
-+		else
-+			reg |= MII_88E1318S_PHY_LED_FUNC_ON << (4 * index);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return phy_write_paged(phydev, MII_MARVELL_LED_PAGE,
-+			       MII_88E1318S_PHY_LED_FUNC, reg);
-+}
-+
- static int marvell_probe(struct phy_device *phydev)
- {
- 	struct marvell_priv *priv;
-@@ -3081,6 +3111,7 @@ static struct phy_driver marvell_drivers
- 		.get_sset_count = marvell_get_sset_count,
- 		.get_strings = marvell_get_strings,
- 		.get_stats = marvell_get_stats,
-+		.led_brightness_set = m88e1318_led_brightness_set,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1145,
-@@ -3187,6 +3218,7 @@ static struct phy_driver marvell_drivers
- 		.cable_test_start = marvell_vct7_cable_test_start,
- 		.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
- 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
-+		.led_brightness_set = m88e1318_led_brightness_set,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1540,
-@@ -3213,6 +3245,7 @@ static struct phy_driver marvell_drivers
- 		.cable_test_start = marvell_vct7_cable_test_start,
- 		.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
- 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
-+		.led_brightness_set = m88e1318_led_brightness_set,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1545,
-@@ -3239,6 +3272,7 @@ static struct phy_driver marvell_drivers
- 		.cable_test_start = marvell_vct7_cable_test_start,
- 		.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
- 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
-+		.led_brightness_set = m88e1318_led_brightness_set,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E3016,
-@@ -3380,6 +3414,7 @@ static struct phy_driver marvell_drivers
- 		.get_stats = marvell_get_stats,
- 		.get_tunable = m88e1540_get_tunable,
- 		.set_tunable = m88e1540_set_tunable,
-+		.led_brightness_set = m88e1318_led_brightness_set,
- 	},
- };
- 
diff --git a/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch
deleted file mode 100644
index 00bdcc54689c..000000000000
--- a/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 4e901018432e38eab35d2a352661ce4727795be1 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 17 Apr 2023 17:17:30 +0200
-Subject: [PATCH 8/9] net: phy: phy_device: Call into the PHY driver to set LED
- blinking
-
-Linux LEDs can be requested to perform hardware accelerated
-blinking. Pass this to the PHY driver, if it implements the op.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy_device.c | 18 ++++++++++++++++++
- include/linux/phy.h          | 12 ++++++++++++
- 2 files changed, 30 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -3052,6 +3052,22 @@ static int phy_led_set_brightness(struct
- 	return err;
- }
- 
-+static int phy_led_blink_set(struct led_classdev *led_cdev,
-+			     unsigned long *delay_on,
-+			     unsigned long *delay_off)
-+{
-+	struct phy_led *phyled = to_phy_led(led_cdev);
-+	struct phy_device *phydev = phyled->phydev;
-+	int err;
-+
-+	mutex_lock(&phydev->lock);
-+	err = phydev->drv->led_blink_set(phydev, phyled->index,
-+					 delay_on, delay_off);
-+	mutex_unlock(&phydev->lock);
-+
-+	return err;
-+}
-+
- static int of_phy_led(struct phy_device *phydev,
- 		      struct device_node *led)
- {
-@@ -3074,6 +3090,8 @@ static int of_phy_led(struct phy_device
- 
- 	if (phydev->drv->led_brightness_set)
- 		cdev->brightness_set_blocking = phy_led_set_brightness;
-+	if (phydev->drv->led_blink_set)
-+		cdev->blink_set = phy_led_blink_set;
- 	cdev->max_brightness = 1;
- 	init_data.devicename = dev_name(&phydev->mdio.dev);
- 	init_data.fwnode = of_fwnode_handle(led);
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -1014,6 +1014,18 @@ struct phy_driver {
- 	 */
- 	int (*led_brightness_set)(struct phy_device *dev,
- 				  u8 index, enum led_brightness value);
-+
-+	/**
-+	 * @led_blink_set: Set a PHY LED brightness.  Index indicates
-+	 * which of the PHYs led should be configured to blink. Delays
-+	 * are in milliseconds and if both are zero then a sensible
-+	 * default should be chosen.  The call should adjust the
-+	 * timings in that case and if it can't match the values
-+	 * specified exactly.
-+	 */
-+	int (*led_blink_set)(struct phy_device *dev, u8 index,
-+			     unsigned long *delay_on,
-+			     unsigned long *delay_off);
- };
- #define to_phy_driver(d) container_of(to_mdio_common_driver(d),		\
- 				      struct phy_driver, mdiodrv)
diff --git a/target/linux/generic/backport-6.1/801-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch b/target/linux/generic/backport-6.1/801-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch
deleted file mode 100644
index 8d5081a43c10..000000000000
--- a/target/linux/generic/backport-6.1/801-v6.4-09-net-phy-marvell-Implement-led_blink_set.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From ea9e86485decb2ac1750005bd96c166c9b780406 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 17 Apr 2023 17:17:31 +0200
-Subject: [PATCH 9/9] net: phy: marvell: Implement led_blink_set()
-
-The Marvell PHY can blink the LEDs, simple on/off. All LEDs blink at
-the same rate, and the reset default is 84ms per blink, which is
-around 12Hz.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/marvell.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/drivers/net/phy/marvell.c
-+++ b/drivers/net/phy/marvell.c
-@@ -147,6 +147,8 @@
- #define MII_88E1318S_PHY_LED_FUNC		0x10
- #define MII_88E1318S_PHY_LED_FUNC_OFF		(0x8)
- #define MII_88E1318S_PHY_LED_FUNC_ON		(0x9)
-+#define MII_88E1318S_PHY_LED_FUNC_HI_Z		(0xa)
-+#define MII_88E1318S_PHY_LED_FUNC_BLINK		(0xb)
- #define MII_88E1318S_PHY_LED_TCR		0x12
- #define MII_88E1318S_PHY_LED_TCR_FORCE_INT	BIT(15)
- #define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE	BIT(7)
-@@ -2862,6 +2864,35 @@ static int m88e1318_led_brightness_set(s
- 			       MII_88E1318S_PHY_LED_FUNC, reg);
- }
- 
-+static int m88e1318_led_blink_set(struct phy_device *phydev, u8 index,
-+				  unsigned long *delay_on,
-+				  unsigned long *delay_off)
-+{
-+	int reg;
-+
-+	reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE,
-+			     MII_88E1318S_PHY_LED_FUNC);
-+	if (reg < 0)
-+		return reg;
-+
-+	switch (index) {
-+	case 0:
-+	case 1:
-+	case 2:
-+		reg &= ~(0xf << (4 * index));
-+			reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index);
-+			/* Reset default is 84ms */
-+			*delay_on = 84 / 2;
-+			*delay_off = 84 / 2;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return phy_write_paged(phydev, MII_MARVELL_LED_PAGE,
-+			       MII_88E1318S_PHY_LED_FUNC, reg);
-+}
-+
- static int marvell_probe(struct phy_device *phydev)
- {
- 	struct marvell_priv *priv;
-@@ -3112,6 +3143,7 @@ static struct phy_driver marvell_drivers
- 		.get_strings = marvell_get_strings,
- 		.get_stats = marvell_get_stats,
- 		.led_brightness_set = m88e1318_led_brightness_set,
-+		.led_blink_set = m88e1318_led_blink_set,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1145,
-@@ -3219,6 +3251,7 @@ static struct phy_driver marvell_drivers
- 		.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
- 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
- 		.led_brightness_set = m88e1318_led_brightness_set,
-+		.led_blink_set = m88e1318_led_blink_set,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1540,
-@@ -3246,6 +3279,7 @@ static struct phy_driver marvell_drivers
- 		.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
- 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
- 		.led_brightness_set = m88e1318_led_brightness_set,
-+		.led_blink_set = m88e1318_led_blink_set,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1545,
-@@ -3273,6 +3307,7 @@ static struct phy_driver marvell_drivers
- 		.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
- 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
- 		.led_brightness_set = m88e1318_led_brightness_set,
-+		.led_blink_set = m88e1318_led_blink_set,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E3016,
-@@ -3415,6 +3450,7 @@ static struct phy_driver marvell_drivers
- 		.get_tunable = m88e1540_get_tunable,
- 		.set_tunable = m88e1540_set_tunable,
- 		.led_brightness_set = m88e1318_led_brightness_set,
-+		.led_blink_set = m88e1318_led_blink_set,
- 	},
- };
- 
diff --git a/target/linux/generic/backport-6.1/802-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch b/target/linux/generic/backport-6.1/802-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch
deleted file mode 100644
index 56df3f095e4c..000000000000
--- a/target/linux/generic/backport-6.1/802-v6.4-net-phy-marvell-Fix-inconsistent-indenting-in-led_bl.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4774ad841bef97cc51df90195338c5b2573dd4cb Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Sun, 23 Apr 2023 19:28:00 +0200
-Subject: [PATCH] net: phy: marvell: Fix inconsistent indenting in
- led_blink_set
-
-Fix inconsistent indeinting in m88e1318_led_blink_set reported by kernel
-test robot, probably done by the presence of an if condition dropped in
-later revision of the same code.
-
-Reported-by: kernel test robot <lkp@intel.com>
-Link: https://lore.kernel.org/oe-kbuild-all/202304240007.0VEX8QYG-lkp@intel.com/
-Fixes: ea9e86485dec ("net: phy: marvell: Implement led_blink_set()")
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20230423172800.3470-1-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/marvell.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/marvell.c
-+++ b/drivers/net/phy/marvell.c
-@@ -2880,10 +2880,10 @@ static int m88e1318_led_blink_set(struct
- 	case 1:
- 	case 2:
- 		reg &= ~(0xf << (4 * index));
--			reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index);
--			/* Reset default is 84ms */
--			*delay_on = 84 / 2;
--			*delay_off = 84 / 2;
-+		reg |= MII_88E1318S_PHY_LED_FUNC_BLINK << (4 * index);
-+		/* Reset default is 84ms */
-+		*delay_on = 84 / 2;
-+		*delay_off = 84 / 2;
- 		break;
- 	default:
- 		return -EINVAL;
diff --git a/target/linux/generic/backport-6.1/803-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch b/target/linux/generic/backport-6.1/803-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch
deleted file mode 100644
index 3170c260580a..000000000000
--- a/target/linux/generic/backport-6.1/803-v6.5-02-leds-trigger-netdev-Drop-NETDEV_LED_MODE_LINKUP-from.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From e2f24cb1b5daf9a4f6f3ba574c1fa74aab9807a4 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 19 Apr 2023 23:07:40 +0200
-Subject: [PATCH 2/5] leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from
- mode
-
-Putting NETDEV_LED_MODE_LINKUP in the same list of the netdev trigger
-modes is wrong as it's used to set the link state of the device and not
-to set a blink mode as it's done by NETDEV_LED_LINK, NETDEV_LED_TX and
-NETDEV_LED_RX. It's also wrong to put this state in the same bitmap of the
-netdev trigger mode and should be external to it.
-
-Drop NETDEV_LED_MODE_LINKUP from mode list and convert to a simple bool
-that will be true or false based on the carrier link. No functional
-change intended.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/20230419210743.3594-3-ansuelsmth@gmail.com
----
- drivers/leds/trigger/ledtrig-netdev.c | 19 ++++++++-----------
- 1 file changed, 8 insertions(+), 11 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -50,10 +50,10 @@ struct led_netdev_data {
- 	unsigned int last_activity;
- 
- 	unsigned long mode;
-+	bool carrier_link_up;
- #define NETDEV_LED_LINK	0
- #define NETDEV_LED_TX	1
- #define NETDEV_LED_RX	2
--#define NETDEV_LED_MODE_LINKUP	3
- };
- 
- enum netdev_led_attr {
-@@ -73,9 +73,9 @@ static void set_baseline_state(struct le
- 	if (!led_cdev->blink_brightness)
- 		led_cdev->blink_brightness = led_cdev->max_brightness;
- 
--	if (!test_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode))
-+	if (!trigger_data->carrier_link_up) {
- 		led_set_brightness(led_cdev, LED_OFF);
--	else {
-+	} else {
- 		if (test_bit(NETDEV_LED_LINK, &trigger_data->mode))
- 			led_set_brightness(led_cdev,
- 					   led_cdev->blink_brightness);
-@@ -131,10 +131,9 @@ static ssize_t device_name_store(struct
- 		trigger_data->net_dev =
- 		    dev_get_by_name(&init_net, trigger_data->device_name);
- 
--	clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
-+	trigger_data->carrier_link_up = false;
- 	if (trigger_data->net_dev != NULL)
--		if (netif_carrier_ok(trigger_data->net_dev))
--			set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
-+		trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
- 
- 	trigger_data->last_activity = 0;
- 
-@@ -315,11 +314,10 @@ static int netdev_trig_notify(struct not
- 
- 	spin_lock_bh(&trigger_data->lock);
- 
--	clear_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
-+	trigger_data->carrier_link_up = false;
- 	switch (evt) {
- 	case NETDEV_CHANGENAME:
--		if (netif_carrier_ok(dev))
--			set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
-+		trigger_data->carrier_link_up = netif_carrier_ok(dev);
- 		fallthrough;
- 	case NETDEV_REGISTER:
- 		if (trigger_data->net_dev)
-@@ -333,8 +331,7 @@ static int netdev_trig_notify(struct not
- 		break;
- 	case NETDEV_UP:
- 	case NETDEV_CHANGE:
--		if (netif_carrier_ok(dev))
--			set_bit(NETDEV_LED_MODE_LINKUP, &trigger_data->mode);
-+		trigger_data->carrier_link_up = netif_carrier_ok(dev);
- 		break;
- 	}
- 
diff --git a/target/linux/generic/backport-6.1/803-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch b/target/linux/generic/backport-6.1/803-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch
deleted file mode 100644
index 19cc1d7c9edc..000000000000
--- a/target/linux/generic/backport-6.1/803-v6.5-03-leds-trigger-netdev-Rename-add-namespace-to-netdev-t.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From bdec9cb83936e0ac4cb87fed5b49fad0175f7dec Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 19 Apr 2023 23:07:41 +0200
-Subject: [PATCH 3/5] leds: trigger: netdev: Rename add namespace to netdev
- trigger enum modes
-
-Rename NETDEV trigger enum modes to a more symbolic name and add a
-namespace to them.
-
-Also add __TRIGGER_NETDEV_MAX to identify the max modes of the netdev
-trigger.
-
-This is a cleanup to drop the define and no behaviour change are
-intended.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/20230419210743.3594-4-ansuelsmth@gmail.com
----
- drivers/leds/trigger/ledtrig-netdev.c | 58 ++++++++++++---------------
- 1 file changed, 25 insertions(+), 33 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -51,15 +51,15 @@ struct led_netdev_data {
- 
- 	unsigned long mode;
- 	bool carrier_link_up;
--#define NETDEV_LED_LINK	0
--#define NETDEV_LED_TX	1
--#define NETDEV_LED_RX	2
- };
- 
--enum netdev_led_attr {
--	NETDEV_ATTR_LINK,
--	NETDEV_ATTR_TX,
--	NETDEV_ATTR_RX
-+enum led_trigger_netdev_modes {
-+	TRIGGER_NETDEV_LINK = 0,
-+	TRIGGER_NETDEV_TX,
-+	TRIGGER_NETDEV_RX,
-+
-+	/* Keep last */
-+	__TRIGGER_NETDEV_MAX,
- };
- 
- static void set_baseline_state(struct led_netdev_data *trigger_data)
-@@ -76,7 +76,7 @@ static void set_baseline_state(struct le
- 	if (!trigger_data->carrier_link_up) {
- 		led_set_brightness(led_cdev, LED_OFF);
- 	} else {
--		if (test_bit(NETDEV_LED_LINK, &trigger_data->mode))
-+		if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode))
- 			led_set_brightness(led_cdev,
- 					   led_cdev->blink_brightness);
- 		else
-@@ -85,8 +85,8 @@ static void set_baseline_state(struct le
- 		/* If we are looking for RX/TX start periodically
- 		 * checking stats
- 		 */
--		if (test_bit(NETDEV_LED_TX, &trigger_data->mode) ||
--		    test_bit(NETDEV_LED_RX, &trigger_data->mode))
-+		if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ||
-+		    test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
- 			schedule_delayed_work(&trigger_data->work, 0);
- 	}
- }
-@@ -146,20 +146,16 @@ static ssize_t device_name_store(struct
- static DEVICE_ATTR_RW(device_name);
- 
- static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
--	enum netdev_led_attr attr)
-+				    enum led_trigger_netdev_modes attr)
- {
- 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
- 	int bit;
- 
- 	switch (attr) {
--	case NETDEV_ATTR_LINK:
--		bit = NETDEV_LED_LINK;
--		break;
--	case NETDEV_ATTR_TX:
--		bit = NETDEV_LED_TX;
--		break;
--	case NETDEV_ATTR_RX:
--		bit = NETDEV_LED_RX;
-+	case TRIGGER_NETDEV_LINK:
-+	case TRIGGER_NETDEV_TX:
-+	case TRIGGER_NETDEV_RX:
-+		bit = attr;
- 		break;
- 	default:
- 		return -EINVAL;
-@@ -169,7 +165,7 @@ static ssize_t netdev_led_attr_show(stru
- }
- 
- static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
--	size_t size, enum netdev_led_attr attr)
-+				     size_t size, enum led_trigger_netdev_modes attr)
- {
- 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
- 	unsigned long state;
-@@ -181,14 +177,10 @@ static ssize_t netdev_led_attr_store(str
- 		return ret;
- 
- 	switch (attr) {
--	case NETDEV_ATTR_LINK:
--		bit = NETDEV_LED_LINK;
--		break;
--	case NETDEV_ATTR_TX:
--		bit = NETDEV_LED_TX;
--		break;
--	case NETDEV_ATTR_RX:
--		bit = NETDEV_LED_RX;
-+	case TRIGGER_NETDEV_LINK:
-+	case TRIGGER_NETDEV_TX:
-+	case TRIGGER_NETDEV_RX:
-+		bit = attr;
- 		break;
- 	default:
- 		return -EINVAL;
-@@ -360,21 +352,21 @@ static void netdev_trig_work(struct work
- 	}
- 
- 	/* If we are not looking for RX/TX then return  */
--	if (!test_bit(NETDEV_LED_TX, &trigger_data->mode) &&
--	    !test_bit(NETDEV_LED_RX, &trigger_data->mode))
-+	if (!test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) &&
-+	    !test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
- 		return;
- 
- 	dev_stats = dev_get_stats(trigger_data->net_dev, &temp);
- 	new_activity =
--	    (test_bit(NETDEV_LED_TX, &trigger_data->mode) ?
-+	    (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ?
- 		dev_stats->tx_packets : 0) +
--	    (test_bit(NETDEV_LED_RX, &trigger_data->mode) ?
-+	    (test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ?
- 		dev_stats->rx_packets : 0);
- 
- 	if (trigger_data->last_activity != new_activity) {
- 		led_stop_software_blink(trigger_data->led_cdev);
- 
--		invert = test_bit(NETDEV_LED_LINK, &trigger_data->mode);
-+		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode);
- 		interval = jiffies_to_msecs(
- 				atomic_read(&trigger_data->interval));
- 		/* base state is ON (link present) */
diff --git a/target/linux/generic/backport-6.1/803-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch b/target/linux/generic/backport-6.1/803-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch
deleted file mode 100644
index 3b45951f5706..000000000000
--- a/target/linux/generic/backport-6.1/803-v6.5-04-leds-trigger-netdev-Convert-device-attr-to-macro.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 164b67d53476a9d114be85c885bd31f783835be4 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 19 Apr 2023 23:07:42 +0200
-Subject: [PATCH 4/5] leds: trigger: netdev: Convert device attr to macro
-
-Convert link tx and rx device attr to a common macro to reduce common
-code and in preparation for additional attr.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/20230419210743.3594-5-ansuelsmth@gmail.com
----
- drivers/leds/trigger/ledtrig-netdev.c | 57 ++++++++-------------------
- 1 file changed, 16 insertions(+), 41 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -198,47 +198,22 @@ static ssize_t netdev_led_attr_store(str
- 	return size;
- }
- 
--static ssize_t link_show(struct device *dev,
--	struct device_attribute *attr, char *buf)
--{
--	return netdev_led_attr_show(dev, buf, NETDEV_ATTR_LINK);
--}
--
--static ssize_t link_store(struct device *dev,
--	struct device_attribute *attr, const char *buf, size_t size)
--{
--	return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_LINK);
--}
--
--static DEVICE_ATTR_RW(link);
--
--static ssize_t tx_show(struct device *dev,
--	struct device_attribute *attr, char *buf)
--{
--	return netdev_led_attr_show(dev, buf, NETDEV_ATTR_TX);
--}
--
--static ssize_t tx_store(struct device *dev,
--	struct device_attribute *attr, const char *buf, size_t size)
--{
--	return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_TX);
--}
--
--static DEVICE_ATTR_RW(tx);
--
--static ssize_t rx_show(struct device *dev,
--	struct device_attribute *attr, char *buf)
--{
--	return netdev_led_attr_show(dev, buf, NETDEV_ATTR_RX);
--}
--
--static ssize_t rx_store(struct device *dev,
--	struct device_attribute *attr, const char *buf, size_t size)
--{
--	return netdev_led_attr_store(dev, buf, size, NETDEV_ATTR_RX);
--}
--
--static DEVICE_ATTR_RW(rx);
-+#define DEFINE_NETDEV_TRIGGER(trigger_name, trigger) \
-+	static ssize_t trigger_name##_show(struct device *dev, \
-+		struct device_attribute *attr, char *buf) \
-+	{ \
-+		return netdev_led_attr_show(dev, buf, trigger); \
-+	} \
-+	static ssize_t trigger_name##_store(struct device *dev, \
-+		struct device_attribute *attr, const char *buf, size_t size) \
-+	{ \
-+		return netdev_led_attr_store(dev, buf, size, trigger); \
-+	} \
-+	static DEVICE_ATTR_RW(trigger_name)
-+
-+DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
-+DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
-+DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
- 
- static ssize_t interval_show(struct device *dev,
- 			     struct device_attribute *attr, char *buf)
diff --git a/target/linux/generic/backport-6.1/803-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch b/target/linux/generic/backport-6.1/803-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch
deleted file mode 100644
index 180bee96128a..000000000000
--- a/target/linux/generic/backport-6.1/803-v6.5-05-leds-trigger-netdev-Use-mutex-instead-of-spinlocks.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From d1b9e1391ab2dc80e9db87fe8b2de015c651e4c9 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 19 Apr 2023 23:07:43 +0200
-Subject: [PATCH 5/5] leds: trigger: netdev: Use mutex instead of spinlocks
-
-Some LEDs may require to sleep while doing some operation like setting
-brightness and other cleanup.
-
-For this reason, using a spinlock will cause a sleep under spinlock
-warning.
-
-It should be safe to convert this to a sleepable lock since:
-- sysfs read/write can sleep
-- netdev_trig_work is a work queue and can sleep
-- netdev _trig_notify can sleep
-
-The spinlock was used when brightness didn't support sleeping, but this
-changed and now it supported with brightness_set_blocking().
-
-Convert to mutex lock to permit sleeping using brightness_set_blocking().
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/20230419210743.3594-6-ansuelsmth@gmail.com
----
- drivers/leds/trigger/ledtrig-netdev.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -20,7 +20,7 @@
- #include <linux/list.h>
- #include <linux/module.h>
- #include <linux/netdevice.h>
--#include <linux/spinlock.h>
-+#include <linux/mutex.h>
- #include <linux/timer.h>
- #include "../leds.h"
- 
-@@ -37,7 +37,7 @@
-  */
- 
- struct led_netdev_data {
--	spinlock_t lock;
-+	struct mutex lock;
- 
- 	struct delayed_work work;
- 	struct notifier_block notifier;
-@@ -97,9 +97,9 @@ static ssize_t device_name_show(struct d
- 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
- 	ssize_t len;
- 
--	spin_lock_bh(&trigger_data->lock);
-+	mutex_lock(&trigger_data->lock);
- 	len = sprintf(buf, "%s\n", trigger_data->device_name);
--	spin_unlock_bh(&trigger_data->lock);
-+	mutex_unlock(&trigger_data->lock);
- 
- 	return len;
- }
-@@ -115,7 +115,7 @@ static ssize_t device_name_store(struct
- 
- 	cancel_delayed_work_sync(&trigger_data->work);
- 
--	spin_lock_bh(&trigger_data->lock);
-+	mutex_lock(&trigger_data->lock);
- 
- 	if (trigger_data->net_dev) {
- 		dev_put(trigger_data->net_dev);
-@@ -138,7 +138,7 @@ static ssize_t device_name_store(struct
- 	trigger_data->last_activity = 0;
- 
- 	set_baseline_state(trigger_data);
--	spin_unlock_bh(&trigger_data->lock);
-+	mutex_unlock(&trigger_data->lock);
- 
- 	return size;
- }
-@@ -279,7 +279,7 @@ static int netdev_trig_notify(struct not
- 
- 	cancel_delayed_work_sync(&trigger_data->work);
- 
--	spin_lock_bh(&trigger_data->lock);
-+	mutex_lock(&trigger_data->lock);
- 
- 	trigger_data->carrier_link_up = false;
- 	switch (evt) {
-@@ -304,7 +304,7 @@ static int netdev_trig_notify(struct not
- 
- 	set_baseline_state(trigger_data);
- 
--	spin_unlock_bh(&trigger_data->lock);
-+	mutex_unlock(&trigger_data->lock);
- 
- 	return NOTIFY_DONE;
- }
-@@ -365,7 +365,7 @@ static int netdev_trig_activate(struct l
- 	if (!trigger_data)
- 		return -ENOMEM;
- 
--	spin_lock_init(&trigger_data->lock);
-+	mutex_init(&trigger_data->lock);
- 
- 	trigger_data->notifier.notifier_call = netdev_trig_notify;
- 	trigger_data->notifier.priority = 10;
diff --git a/target/linux/generic/backport-6.1/804-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch b/target/linux/generic/backport-6.1/804-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch
deleted file mode 100644
index ac186117338f..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-01-leds-add-APIs-for-LEDs-hw-control.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From ed554d3f945179c5b159bddfad7be34b403fe11a Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 May 2023 18:32:31 +0200
-Subject: [PATCH 01/13] leds: add APIs for LEDs hw control
-
-Add an option to permit LED driver to declare support for a specific
-trigger to use hw control and setup the LED to blink based on specific
-provided modes.
-
-Add APIs for LEDs hw control. These functions will be used to activate
-hardware control where a LED will use the provided flags, from an
-unique defined supported trigger, to setup the LED to be driven by
-hardware.
-
-Add hw_control_is_supported() to ask the LED driver if the requested
-mode by the trigger are supported and the LED can be setup to follow
-the requested modes.
-
-Deactivate hardware blink control by setting brightness to LED_OFF via
-the brightness_set() callback.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/linux/leds.h | 37 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 37 insertions(+)
-
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -164,6 +164,43 @@ struct led_classdev {
- 
- 	/* LEDs that have private triggers have this set */
- 	struct led_hw_trigger_type	*trigger_type;
-+
-+	/* Unique trigger name supported by LED set in hw control mode */
-+	const char		*hw_control_trigger;
-+	/*
-+	 * Check if the LED driver supports the requested mode provided by the
-+	 * defined supported trigger to setup the LED to hw control mode.
-+	 *
-+	 * Return 0 on success. Return -EOPNOTSUPP when the passed flags are not
-+	 * supported and software fallback needs to be used.
-+	 * Return a negative error number on any other case  for check fail due
-+	 * to various reason like device not ready or timeouts.
-+	 */
-+	int			(*hw_control_is_supported)(struct led_classdev *led_cdev,
-+							   unsigned long flags);
-+	/*
-+	 * Activate hardware control, LED driver will use the provided flags
-+	 * from the supported trigger and setup the LED to be driven by hardware
-+	 * following the requested mode from the trigger flags.
-+	 * Deactivate hardware blink control by setting brightness to LED_OFF via
-+	 * the brightness_set() callback.
-+	 *
-+	 * Return 0 on success, a negative error number on flags apply fail.
-+	 */
-+	int			(*hw_control_set)(struct led_classdev *led_cdev,
-+						  unsigned long flags);
-+	/*
-+	 * Get from the LED driver the current mode that the LED is set in hw
-+	 * control mode and put them in flags.
-+	 * Trigger can use this to get the initial state of a LED already set in
-+	 * hardware blink control.
-+	 *
-+	 * Return 0 on success, a negative error number on failing parsing the
-+	 * initial mode. Error from this function is NOT FATAL as the device
-+	 * may be in a not supported initial state by the attached LED trigger.
-+	 */
-+	int			(*hw_control_get)(struct led_classdev *led_cdev,
-+						  unsigned long *flags);
- #endif
- 
- #ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED
diff --git a/target/linux/generic/backport-6.1/804-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch b/target/linux/generic/backport-6.1/804-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch
deleted file mode 100644
index 1a221727a01d..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-02-leds-add-API-to-get-attached-device-for-LED-hw-contr.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 052c38eb17e866c5b4cd43924e7a5e20167b55c0 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 29 May 2023 18:32:32 +0200
-Subject: [PATCH 02/13] leds: add API to get attached device for LED hw control
-
-Some specific LED triggers blink the LED based on events from a device
-or subsystem.
-For example, an LED could be blinked to indicate a network device is
-receiving packets, or a disk is reading blocks. To correctly enable and
-request the hw control of the LED, the trigger has to check if the
-network interface or block device configured via a /sys/class/led file
-match the one the LED driver provide for hw control for.
-
-Provide an API call to get the device which the LED blinks for.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/linux/leds.h | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -201,6 +201,12 @@ struct led_classdev {
- 	 */
- 	int			(*hw_control_get)(struct led_classdev *led_cdev,
- 						  unsigned long *flags);
-+	/*
-+	 * Get the device this LED blinks in response to.
-+	 * e.g. for a PHY LED, it is the network device. If the LED is
-+	 * not yet associated to a device, return NULL.
-+	 */
-+	struct device		*(*hw_control_get_device)(struct led_classdev *led_cdev);
- #endif
- 
- #ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED
diff --git a/target/linux/generic/backport-6.1/804-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch b/target/linux/generic/backport-6.1/804-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch
deleted file mode 100644
index af9fb7fdc365..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-03-Documentation-leds-leds-class-Document-new-Hardware-.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From 8aa2fd7b66980ecd2e45e95af61cf7eafede1211 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 May 2023 18:32:33 +0200
-Subject: [PATCH 03/13] Documentation: leds: leds-class: Document new Hardware
- driven LEDs APIs
-
-Document new Hardware driven LEDs APIs.
-
-Some LEDs can be programmed to be driven by hardware. This is not
-limited to blink but also to turn off or on autonomously.
-To support this feature, a LED needs to implement various additional
-ops and needs to declare specific support for the supported triggers.
-
-Add documentation for each required value and API to make hw control
-possible and implementable by both LEDs and triggers.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- Documentation/leds/leds-class.rst | 81 +++++++++++++++++++++++++++++++
- 1 file changed, 81 insertions(+)
-
---- a/Documentation/leds/leds-class.rst
-+++ b/Documentation/leds/leds-class.rst
-@@ -169,6 +169,87 @@ Setting the brightness to zero with brig
- should completely turn off the LED and cancel the previously programmed
- hardware blinking function, if any.
- 
-+Hardware driven LEDs
-+====================
-+
-+Some LEDs can be programmed to be driven by hardware. This is not
-+limited to blink but also to turn off or on autonomously.
-+To support this feature, a LED needs to implement various additional
-+ops and needs to declare specific support for the supported triggers.
-+
-+With hw control we refer to the LED driven by hardware.
-+
-+LED driver must define the following value to support hw control:
-+
-+    - hw_control_trigger:
-+               unique trigger name supported by the LED in hw control
-+               mode.
-+
-+LED driver must implement the following API to support hw control:
-+    - hw_control_is_supported:
-+                check if the flags passed by the supported trigger can
-+                be parsed and activate hw control on the LED.
-+
-+                Return 0 if the passed flags mask is supported and
-+                can be set with hw_control_set().
-+
-+                If the passed flags mask is not supported -EOPNOTSUPP
-+                must be returned, the LED trigger will use software
-+                fallback in this case.
-+
-+                Return a negative error in case of any other error like
-+                device not ready or timeouts.
-+
-+     - hw_control_set:
-+                activate hw control. LED driver will use the provided
-+                flags passed from the supported trigger, parse them to
-+                a set of mode and setup the LED to be driven by hardware
-+                following the requested modes.
-+
-+                Set LED_OFF via the brightness_set to deactivate hw control.
-+
-+                Return 0 on success, a negative error number on failing to
-+                apply flags.
-+
-+    - hw_control_get:
-+                get active modes from a LED already in hw control, parse
-+                them and set in flags the current active flags for the
-+                supported trigger.
-+
-+                Return 0 on success, a negative error number on failing
-+                parsing the initial mode.
-+                Error from this function is NOT FATAL as the device may
-+                be in a not supported initial state by the attached LED
-+                trigger.
-+
-+    - hw_control_get_device:
-+                return the device associated with the LED driver in
-+                hw control. A trigger might use this to match the
-+                returned device from this function with a configured
-+                device for the trigger as the source for blinking
-+                events and correctly enable hw control.
-+                (example a netdev trigger configured to blink for a
-+                particular dev match the returned dev from get_device
-+                to set hw control)
-+
-+                Returns a pointer to a struct device or NULL if nothing
-+                is currently attached.
-+
-+LED driver can activate additional modes by default to workaround the
-+impossibility of supporting each different mode on the supported trigger.
-+Examples are hardcoding the blink speed to a set interval, enable special
-+feature like bypassing blink if some requirements are not met.
-+
-+A trigger should first check if the hw control API are supported by the LED
-+driver and check if the trigger is supported to verify if hw control is possible,
-+use hw_control_is_supported to check if the flags are supported and only at
-+the end use hw_control_set to activate hw control.
-+
-+A trigger can use hw_control_get to check if a LED is already in hw control
-+and init their flags.
-+
-+When the LED is in hw control, no software blink is possible and doing so
-+will effectively disable hw control.
- 
- Known Issues
- ============
diff --git a/target/linux/generic/backport-6.1/804-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch b/target/linux/generic/backport-6.1/804-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch
deleted file mode 100644
index 3c804c0b412e..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-04-leds-trigger-netdev-refactor-code-setting-device-nam.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 28a6a2ef18ad840a390d519840c303b03040961c Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 29 May 2023 18:32:34 +0200
-Subject: [PATCH 04/13] leds: trigger: netdev: refactor code setting device
- name
-
-Move the code into a helper, ready for it to be called at
-other times. No intended behaviour change.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/leds/trigger/ledtrig-netdev.c | 29 ++++++++++++++++++---------
- 1 file changed, 20 insertions(+), 9 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -104,15 +104,9 @@ static ssize_t device_name_show(struct d
- 	return len;
- }
- 
--static ssize_t device_name_store(struct device *dev,
--				 struct device_attribute *attr, const char *buf,
--				 size_t size)
-+static int set_device_name(struct led_netdev_data *trigger_data,
-+			   const char *name, size_t size)
- {
--	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
--
--	if (size >= IFNAMSIZ)
--		return -EINVAL;
--
- 	cancel_delayed_work_sync(&trigger_data->work);
- 
- 	mutex_lock(&trigger_data->lock);
-@@ -122,7 +116,7 @@ static ssize_t device_name_store(struct
- 		trigger_data->net_dev = NULL;
- 	}
- 
--	memcpy(trigger_data->device_name, buf, size);
-+	memcpy(trigger_data->device_name, name, size);
- 	trigger_data->device_name[size] = 0;
- 	if (size > 0 && trigger_data->device_name[size - 1] == '\n')
- 		trigger_data->device_name[size - 1] = 0;
-@@ -140,6 +134,23 @@ static ssize_t device_name_store(struct
- 	set_baseline_state(trigger_data);
- 	mutex_unlock(&trigger_data->lock);
- 
-+	return 0;
-+}
-+
-+static ssize_t device_name_store(struct device *dev,
-+				 struct device_attribute *attr, const char *buf,
-+				 size_t size)
-+{
-+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
-+	int ret;
-+
-+	if (size >= IFNAMSIZ)
-+		return -EINVAL;
-+
-+	ret = set_device_name(trigger_data, buf, size);
-+
-+	if (ret < 0)
-+		return ret;
- 	return size;
- }
- 
diff --git a/target/linux/generic/backport-6.1/804-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch b/target/linux/generic/backport-6.1/804-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch
deleted file mode 100644
index 284b519482cf..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-05-leds-trigger-netdev-introduce-check-for-possible-hw-.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 4fd1b6d47a7a38e81fdc6f8be2ccd4216b3f93db Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 May 2023 18:32:35 +0200
-Subject: [PATCH 05/13] leds: trigger: netdev: introduce check for possible hw
- control
-
-Introduce function to check if the requested mode can use hw control in
-preparation for hw control support. Currently everything is handled in
-software so can_hw_control will always return false.
-
-Add knob with the new value hw_control in trigger_data struct to
-set hw control possible. Useful for future implementation to implement
-in set_baseline_state() the required function to set the requested mode
-using LEDs hw control ops and in other function to reject set if hw
-control is currently active.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/leds/trigger/ledtrig-netdev.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -51,6 +51,7 @@ struct led_netdev_data {
- 
- 	unsigned long mode;
- 	bool carrier_link_up;
-+	bool hw_control;
- };
- 
- enum led_trigger_netdev_modes {
-@@ -91,6 +92,11 @@ static void set_baseline_state(struct le
- 	}
- }
- 
-+static bool can_hw_control(struct led_netdev_data *trigger_data)
-+{
-+	return false;
-+}
-+
- static ssize_t device_name_show(struct device *dev,
- 				struct device_attribute *attr, char *buf)
- {
-@@ -204,6 +210,8 @@ static ssize_t netdev_led_attr_store(str
- 	else
- 		clear_bit(bit, &trigger_data->mode);
- 
-+	trigger_data->hw_control = can_hw_control(trigger_data);
-+
- 	set_baseline_state(trigger_data);
- 
- 	return size;
diff --git a/target/linux/generic/backport-6.1/804-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch b/target/linux/generic/backport-6.1/804-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch
deleted file mode 100644
index 09759bc623e9..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-06-leds-trigger-netdev-add-basic-check-for-hw-control-s.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 6352f25f9fadba59d5df2ba7139495759ccc81d5 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 May 2023 18:32:36 +0200
-Subject: [PATCH 06/13] leds: trigger: netdev: add basic check for hw control
- support
-
-Add basic check for hw control support. Check if the required API are
-defined and check if the defined trigger supported in hw control for the
-LED driver match netdev.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/leds/trigger/ledtrig-netdev.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -92,8 +92,22 @@ static void set_baseline_state(struct le
- 	}
- }
- 
-+static bool supports_hw_control(struct led_classdev *led_cdev)
-+{
-+	if (!led_cdev->hw_control_get || !led_cdev->hw_control_set ||
-+	    !led_cdev->hw_control_is_supported)
-+		return false;
-+
-+	return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name);
-+}
-+
- static bool can_hw_control(struct led_netdev_data *trigger_data)
- {
-+	struct led_classdev *led_cdev = trigger_data->led_cdev;
-+
-+	if (!supports_hw_control(led_cdev))
-+		return false;
-+
- 	return false;
- }
- 
diff --git a/target/linux/generic/backport-6.1/804-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch b/target/linux/generic/backport-6.1/804-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch
deleted file mode 100644
index 663490680031..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-07-leds-trigger-netdev-reject-interval-store-for-hw_con.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From c84c80c7388f887b10dafd70fc55bc6c5fe9fa5a Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 May 2023 18:32:37 +0200
-Subject: [PATCH 07/13] leds: trigger: netdev: reject interval store for
- hw_control
-
-Reject interval store with hw_control enabled. It's are currently not
-supported and MUST be set to the default value with hw control enabled.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/leds/trigger/ledtrig-netdev.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -265,6 +265,9 @@ static ssize_t interval_store(struct dev
- 	unsigned long value;
- 	int ret;
- 
-+	if (trigger_data->hw_control)
-+		return -EINVAL;
-+
- 	ret = kstrtoul(buf, 0, &value);
- 	if (ret)
- 		return ret;
diff --git a/target/linux/generic/backport-6.1/804-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch b/target/linux/generic/backport-6.1/804-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch
deleted file mode 100644
index 52faa4809b2a..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-08-leds-trigger-netdev-add-support-for-LED-hw-control.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 7c145a34ba6e380616af93262fcab9fc7261d851 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 May 2023 18:32:38 +0200
-Subject: [PATCH 08/13] leds: trigger: netdev: add support for LED hw control
-
-Add support for LED hw control for the netdev trigger.
-
-The trigger on calling set_baseline_state to configure a new mode, will
-do various check to verify if hw control can be used for the requested
-mode in can_hw_control() function.
-
-It will first check if the LED driver supports hw control for the netdev
-trigger, then will use hw_control_is_supported() and finally will call
-hw_control_set() to apply the requested mode.
-
-To use such mode, interval MUST be set to the default value and net_dev
-MUST be set. If one of these 2 value are not valid, hw control will
-never be used and normal software fallback is used.
-
-The default interval value is moved to a define to make sure they are
-always synced.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/leds/trigger/ledtrig-netdev.c | 43 +++++++++++++++++++++++++--
- 1 file changed, 41 insertions(+), 2 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -24,6 +24,8 @@
- #include <linux/timer.h>
- #include "../leds.h"
- 
-+#define NETDEV_LED_DEFAULT_INTERVAL	50
-+
- /*
-  * Configurable sysfs attributes:
-  *
-@@ -68,6 +70,13 @@ static void set_baseline_state(struct le
- 	int current_brightness;
- 	struct led_classdev *led_cdev = trigger_data->led_cdev;
- 
-+	/* Already validated, hw control is possible with the requested mode */
-+	if (trigger_data->hw_control) {
-+		led_cdev->hw_control_set(led_cdev, trigger_data->mode);
-+
-+		return;
-+	}
-+
- 	current_brightness = led_cdev->brightness;
- 	if (current_brightness)
- 		led_cdev->blink_brightness = current_brightness;
-@@ -103,12 +112,42 @@ static bool supports_hw_control(struct l
- 
- static bool can_hw_control(struct led_netdev_data *trigger_data)
- {
-+	unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL);
-+	unsigned int interval = atomic_read(&trigger_data->interval);
- 	struct led_classdev *led_cdev = trigger_data->led_cdev;
-+	int ret;
- 
- 	if (!supports_hw_control(led_cdev))
- 		return false;
- 
--	return false;
-+	/*
-+	 * Interval must be set to the default
-+	 * value. Any different value is rejected if in hw
-+	 * control.
-+	 */
-+	if (interval != default_interval)
-+		return false;
-+
-+	/*
-+	 * net_dev must be set with hw control, otherwise no
-+	 * blinking can be happening and there is nothing to
-+	 * offloaded.
-+	 */
-+	if (!trigger_data->net_dev)
-+		return false;
-+
-+	/* Check if the requested mode is supported */
-+	ret = led_cdev->hw_control_is_supported(led_cdev, trigger_data->mode);
-+	/* Fall back to software blinking if not supported */
-+	if (ret == -EOPNOTSUPP)
-+		return false;
-+	if (ret) {
-+		dev_warn(led_cdev->dev,
-+			 "Current mode check failed with error %d\n", ret);
-+		return false;
-+	}
-+
-+	return true;
- }
- 
- static ssize_t device_name_show(struct device *dev,
-@@ -413,7 +452,7 @@ static int netdev_trig_activate(struct l
- 	trigger_data->device_name[0] = 0;
- 
- 	trigger_data->mode = 0;
--	atomic_set(&trigger_data->interval, msecs_to_jiffies(50));
-+	atomic_set(&trigger_data->interval, msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL));
- 	trigger_data->last_activity = 0;
- 
- 	led_set_trigger_data(led_cdev, trigger_data);
diff --git a/target/linux/generic/backport-6.1/804-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch b/target/linux/generic/backport-6.1/804-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch
deleted file mode 100644
index c129ffa4f594..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-09-leds-trigger-netdev-validate-configured-netdev.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 33ec0b53befff2c0a7f3aa19ff08556d60585d6b Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 29 May 2023 18:32:39 +0200
-Subject: [PATCH 09/13] leds: trigger: netdev: validate configured netdev
-
-The netdev which the LED should blink for is configurable in
-/sys/class/led/foo/device_name. Ensure when offloading that the
-configured netdev is the same as the netdev the LED is associated
-with. If it is not, only perform software blinking.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/leds/trigger/ledtrig-netdev.c | 24 ++++++++++++++++++++++--
- 1 file changed, 22 insertions(+), 2 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -110,6 +110,24 @@ static bool supports_hw_control(struct l
- 	return !strcmp(led_cdev->hw_control_trigger, led_cdev->trigger->name);
- }
- 
-+/*
-+ * Validate the configured netdev is the same as the one associated with
-+ * the LED driver in hw control.
-+ */
-+static bool validate_net_dev(struct led_classdev *led_cdev,
-+			     struct net_device *net_dev)
-+{
-+	struct device *dev = led_cdev->hw_control_get_device(led_cdev);
-+	struct net_device *ndev;
-+
-+	if (!dev)
-+		return false;
-+
-+	ndev = to_net_dev(dev);
-+
-+	return ndev == net_dev;
-+}
-+
- static bool can_hw_control(struct led_netdev_data *trigger_data)
- {
- 	unsigned long default_interval = msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL);
-@@ -131,9 +149,11 @@ static bool can_hw_control(struct led_ne
- 	/*
- 	 * net_dev must be set with hw control, otherwise no
- 	 * blinking can be happening and there is nothing to
--	 * offloaded.
-+	 * offloaded. Additionally, for hw control to be
-+	 * valid, the configured netdev must be the same as
-+	 * netdev associated to the LED.
- 	 */
--	if (!trigger_data->net_dev)
-+	if (!validate_net_dev(led_cdev, trigger_data->net_dev))
- 		return false;
- 
- 	/* Check if the requested mode is supported */
diff --git a/target/linux/generic/backport-6.1/804-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch b/target/linux/generic/backport-6.1/804-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch
deleted file mode 100644
index e20594c99a3e..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-10-leds-trigger-netdev-init-mode-if-hw-control-already-.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 0316cc5629d15880dd3f097d221c55ca648bcd61 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 May 2023 18:32:40 +0200
-Subject: [PATCH 10/13] leds: trigger: netdev: init mode if hw control already
- active
-
-On netdev trigger activation, hw control may be already active by
-default. If this is the case and a device is actually provided by
-hw_control_get_device(), init the already active mode and set the
-bool to hw_control bool to true to reflect the already set mode in the
-trigger_data.
-
-Co-developed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/leds/trigger/ledtrig-netdev.c | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -454,6 +454,8 @@ static void netdev_trig_work(struct work
- static int netdev_trig_activate(struct led_classdev *led_cdev)
- {
- 	struct led_netdev_data *trigger_data;
-+	unsigned long mode;
-+	struct device *dev;
- 	int rc;
- 
- 	trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
-@@ -475,6 +477,21 @@ static int netdev_trig_activate(struct l
- 	atomic_set(&trigger_data->interval, msecs_to_jiffies(NETDEV_LED_DEFAULT_INTERVAL));
- 	trigger_data->last_activity = 0;
- 
-+	/* Check if hw control is active by default on the LED.
-+	 * Init already enabled mode in hw control.
-+	 */
-+	if (supports_hw_control(led_cdev) &&
-+	    !led_cdev->hw_control_get(led_cdev, &mode)) {
-+		dev = led_cdev->hw_control_get_device(led_cdev);
-+		if (dev) {
-+			const char *name = dev_name(dev);
-+
-+			set_device_name(trigger_data, name, strlen(name));
-+			trigger_data->hw_control = true;
-+			trigger_data->mode = mode;
-+		}
-+	}
-+
- 	led_set_trigger_data(led_cdev, trigger_data);
- 
- 	rc = register_netdevice_notifier(&trigger_data->notifier);
diff --git a/target/linux/generic/backport-6.1/804-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch b/target/linux/generic/backport-6.1/804-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch
deleted file mode 100644
index f23504b1d032..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-11-leds-trigger-netdev-expose-netdev-trigger-modes-in-l.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 947acacab5ea151291b861cdfbde16ff5cf1b08c Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 May 2023 18:32:41 +0200
-Subject: [PATCH 11/13] leds: trigger: netdev: expose netdev trigger modes in
- linux include
-
-Expose netdev trigger modes to make them accessible by LED driver that
-will support netdev trigger for hw control.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/leds/trigger/ledtrig-netdev.c |  9 ---------
- include/linux/leds.h                  | 10 ++++++++++
- 2 files changed, 10 insertions(+), 9 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -56,15 +56,6 @@ struct led_netdev_data {
- 	bool hw_control;
- };
- 
--enum led_trigger_netdev_modes {
--	TRIGGER_NETDEV_LINK = 0,
--	TRIGGER_NETDEV_TX,
--	TRIGGER_NETDEV_RX,
--
--	/* Keep last */
--	__TRIGGER_NETDEV_MAX,
--};
--
- static void set_baseline_state(struct led_netdev_data *trigger_data)
- {
- 	int current_brightness;
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -525,6 +525,16 @@ led_trigger_get_brightness(const struct
- 
- #endif /* CONFIG_LEDS_TRIGGERS */
- 
-+/* Trigger specific enum */
-+enum led_trigger_netdev_modes {
-+	TRIGGER_NETDEV_LINK = 0,
-+	TRIGGER_NETDEV_TX,
-+	TRIGGER_NETDEV_RX,
-+
-+	/* Keep last */
-+	__TRIGGER_NETDEV_MAX,
-+};
-+
- /* Trigger specific functions */
- #ifdef CONFIG_LEDS_TRIGGER_DISK
- void ledtrig_disk_activity(bool write);
diff --git a/target/linux/generic/backport-6.1/804-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch b/target/linux/generic/backport-6.1/804-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch
deleted file mode 100644
index ad76d89b7bf8..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-12-net-dsa-qca8k-implement-hw_control-ops.patch
+++ /dev/null
@@ -1,200 +0,0 @@
-From e0256648c831af13cbfe4a1787327fcec01c2807 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 29 May 2023 18:32:42 +0200
-Subject: [PATCH 12/13] net: dsa: qca8k: implement hw_control ops
-
-Implement hw_control ops to drive Switch LEDs based on hardware events.
-
-Netdev trigger is the declared supported trigger for hw control
-operation and supports the following mode:
-- tx
-- rx
-
-When hw_control_set is called, LEDs are set to follow the requested
-mode.
-Each LEDs will blink at 4Hz by default.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-leds.c | 154 +++++++++++++++++++++++++++++++
- 1 file changed, 154 insertions(+)
-
---- a/drivers/net/dsa/qca/qca8k-leds.c
-+++ b/drivers/net/dsa/qca/qca8k-leds.c
-@@ -32,6 +32,43 @@ qca8k_get_enable_led_reg(int port_num, i
- }
- 
- static int
-+qca8k_get_control_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info)
-+{
-+	reg_info->reg = QCA8K_LED_CTRL_REG(led_num);
-+
-+	/* 6 total control rule:
-+	 * 3 control rules for phy0-3 that applies to all their leds
-+	 * 3 control rules for phy4
-+	 */
-+	if (port_num == 4)
-+		reg_info->shift = QCA8K_LED_PHY4_CONTROL_RULE_SHIFT;
-+	else
-+		reg_info->shift = QCA8K_LED_PHY0123_CONTROL_RULE_SHIFT;
-+
-+	return 0;
-+}
-+
-+static int
-+qca8k_parse_netdev(unsigned long rules, u32 *offload_trigger)
-+{
-+	/* Parsing specific to netdev trigger */
-+	if (test_bit(TRIGGER_NETDEV_TX, &rules))
-+		*offload_trigger |= QCA8K_LED_TX_BLINK_MASK;
-+	if (test_bit(TRIGGER_NETDEV_RX, &rules))
-+		*offload_trigger |= QCA8K_LED_RX_BLINK_MASK;
-+
-+	if (rules && !*offload_trigger)
-+		return -EOPNOTSUPP;
-+
-+	/* Enable some default rule by default to the requested mode:
-+	 * - Blink at 4Hz by default
-+	 */
-+	*offload_trigger |= QCA8K_LED_BLINK_4HZ;
-+
-+	return 0;
-+}
-+
-+static int
- qca8k_led_brightness_set(struct qca8k_led *led,
- 			 enum led_brightness brightness)
- {
-@@ -165,6 +202,119 @@ qca8k_cled_blink_set(struct led_classdev
- }
- 
- static int
-+qca8k_cled_trigger_offload(struct led_classdev *ldev, bool enable)
-+{
-+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
-+
-+	struct qca8k_led_pattern_en reg_info;
-+	struct qca8k_priv *priv = led->priv;
-+	u32 mask, val = QCA8K_LED_ALWAYS_OFF;
-+
-+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
-+
-+	if (enable)
-+		val = QCA8K_LED_RULE_CONTROLLED;
-+
-+	if (led->port_num == 0 || led->port_num == 4) {
-+		mask = QCA8K_LED_PATTERN_EN_MASK;
-+		val <<= QCA8K_LED_PATTERN_EN_SHIFT;
-+	} else {
-+		mask = QCA8K_LED_PHY123_PATTERN_EN_MASK;
-+	}
-+
-+	return regmap_update_bits(priv->regmap, reg_info.reg, mask << reg_info.shift,
-+				  val << reg_info.shift);
-+}
-+
-+static bool
-+qca8k_cled_hw_control_status(struct led_classdev *ldev)
-+{
-+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
-+
-+	struct qca8k_led_pattern_en reg_info;
-+	struct qca8k_priv *priv = led->priv;
-+	u32 val;
-+
-+	qca8k_get_enable_led_reg(led->port_num, led->led_num, &reg_info);
-+
-+	regmap_read(priv->regmap, reg_info.reg, &val);
-+
-+	val >>= reg_info.shift;
-+
-+	if (led->port_num == 0 || led->port_num == 4) {
-+		val &= QCA8K_LED_PATTERN_EN_MASK;
-+		val >>= QCA8K_LED_PATTERN_EN_SHIFT;
-+	} else {
-+		val &= QCA8K_LED_PHY123_PATTERN_EN_MASK;
-+	}
-+
-+	return val == QCA8K_LED_RULE_CONTROLLED;
-+}
-+
-+static int
-+qca8k_cled_hw_control_is_supported(struct led_classdev *ldev, unsigned long rules)
-+{
-+	u32 offload_trigger = 0;
-+
-+	return qca8k_parse_netdev(rules, &offload_trigger);
-+}
-+
-+static int
-+qca8k_cled_hw_control_set(struct led_classdev *ldev, unsigned long rules)
-+{
-+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
-+	struct qca8k_led_pattern_en reg_info;
-+	struct qca8k_priv *priv = led->priv;
-+	u32 offload_trigger = 0;
-+	int ret;
-+
-+	ret = qca8k_parse_netdev(rules, &offload_trigger);
-+	if (ret)
-+		return ret;
-+
-+	ret = qca8k_cled_trigger_offload(ldev, true);
-+	if (ret)
-+		return ret;
-+
-+	qca8k_get_control_led_reg(led->port_num, led->led_num, &reg_info);
-+
-+	return regmap_update_bits(priv->regmap, reg_info.reg,
-+				  QCA8K_LED_RULE_MASK << reg_info.shift,
-+				  offload_trigger << reg_info.shift);
-+}
-+
-+static int
-+qca8k_cled_hw_control_get(struct led_classdev *ldev, unsigned long *rules)
-+{
-+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
-+	struct qca8k_led_pattern_en reg_info;
-+	struct qca8k_priv *priv = led->priv;
-+	u32 val;
-+	int ret;
-+
-+	/* With hw control not active return err */
-+	if (!qca8k_cled_hw_control_status(ldev))
-+		return -EINVAL;
-+
-+	qca8k_get_control_led_reg(led->port_num, led->led_num, &reg_info);
-+
-+	ret = regmap_read(priv->regmap, reg_info.reg, &val);
-+	if (ret)
-+		return ret;
-+
-+	val >>= reg_info.shift;
-+	val &= QCA8K_LED_RULE_MASK;
-+
-+	/* Parsing specific to netdev trigger */
-+	if (val & QCA8K_LED_TX_BLINK_MASK)
-+		set_bit(TRIGGER_NETDEV_TX, rules);
-+	if (val & QCA8K_LED_RX_BLINK_MASK)
-+		set_bit(TRIGGER_NETDEV_RX, rules);
-+
-+	return 0;
-+}
-+
-+static int
- qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num)
- {
- 	struct fwnode_handle *led = NULL, *leds = NULL;
-@@ -224,6 +374,10 @@ qca8k_parse_port_leds(struct qca8k_priv
- 		port_led->cdev.max_brightness = 1;
- 		port_led->cdev.brightness_set_blocking = qca8k_cled_brightness_set_blocking;
- 		port_led->cdev.blink_set = qca8k_cled_blink_set;
-+		port_led->cdev.hw_control_is_supported = qca8k_cled_hw_control_is_supported;
-+		port_led->cdev.hw_control_set = qca8k_cled_hw_control_set;
-+		port_led->cdev.hw_control_get = qca8k_cled_hw_control_get;
-+		port_led->cdev.hw_control_trigger = "netdev";
- 		init_data.default_label = ":port";
- 		init_data.fwnode = led;
- 		init_data.devname_mandatory = true;
diff --git a/target/linux/generic/backport-6.1/804-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch b/target/linux/generic/backport-6.1/804-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch
deleted file mode 100644
index feb6b9e1e4e8..000000000000
--- a/target/linux/generic/backport-6.1/804-v6.5-13-net-dsa-qca8k-add-op-to-get-ports-netdev.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 4f53c27f772e27e4cf4e5507d6f4d5980002cb6a Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Mon, 29 May 2023 18:32:43 +0200
-Subject: [PATCH 13/13] net: dsa: qca8k: add op to get ports netdev
-
-In order that the LED trigger can blink the switch MAC ports LED, it
-needs to know the netdev associated to the port. Add the callback to
-return the struct device of the netdev.
-
-Add an helper function qca8k_phy_to_port() to convert the phy back to
-dsa_port index, as we reference LED port based on the internal PHY
-index and needs to be converted back.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/qca/qca8k-leds.c | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/drivers/net/dsa/qca/qca8k-leds.c
-+++ b/drivers/net/dsa/qca/qca8k-leds.c
-@@ -5,6 +5,18 @@
- #include "qca8k.h"
- #include "qca8k_leds.h"
- 
-+static u32 qca8k_phy_to_port(int phy)
-+{
-+	/* Internal PHY 0 has port at index 1.
-+	 * Internal PHY 1 has port at index 2.
-+	 * Internal PHY 2 has port at index 3.
-+	 * Internal PHY 3 has port at index 4.
-+	 * Internal PHY 4 has port at index 5.
-+	 */
-+
-+	return phy + 1;
-+}
-+
- static int
- qca8k_get_enable_led_reg(int port_num, int led_num, struct qca8k_led_pattern_en *reg_info)
- {
-@@ -314,6 +326,20 @@ qca8k_cled_hw_control_get(struct led_cla
- 	return 0;
- }
- 
-+static struct device *qca8k_cled_hw_control_get_device(struct led_classdev *ldev)
-+{
-+	struct qca8k_led *led = container_of(ldev, struct qca8k_led, cdev);
-+	struct qca8k_priv *priv = led->priv;
-+	struct dsa_port *dp;
-+
-+	dp = dsa_to_port(priv->ds, qca8k_phy_to_port(led->port_num));
-+	if (!dp)
-+		return NULL;
-+	if (dp->slave)
-+		return &dp->slave->dev;
-+	return NULL;
-+}
-+
- static int
- qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int port_num)
- {
-@@ -377,6 +403,7 @@ qca8k_parse_port_leds(struct qca8k_priv
- 		port_led->cdev.hw_control_is_supported = qca8k_cled_hw_control_is_supported;
- 		port_led->cdev.hw_control_set = qca8k_cled_hw_control_set;
- 		port_led->cdev.hw_control_get = qca8k_cled_hw_control_get;
-+		port_led->cdev.hw_control_get_device = qca8k_cled_hw_control_get_device;
- 		port_led->cdev.hw_control_trigger = "netdev";
- 		init_data.default_label = ":port";
- 		init_data.fwnode = led;
diff --git a/target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch b/target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch
deleted file mode 100644
index 38989a2a6316..000000000000
--- a/target/linux/generic/backport-6.1/805-v6.5-01-leds-trigger-netdev-add-additional-specific-link-spe.patch
+++ /dev/null
@@ -1,242 +0,0 @@
-From d5e01266e7f5fa12400d4c8aa4e86fe89dcc61e9 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 19 Jun 2023 22:46:58 +0200
-Subject: [PATCH 1/3] leds: trigger: netdev: add additional specific link speed
- mode
-
-Add additional modes for specific link speed. Use ethtool APIs to get the
-current link speed and enable the LED accordingly. Under netdev event
-handler the rtnl lock is already held and is not needed to be set to
-access ethtool APIs.
-
-This is especially useful for PHY and Switch that supports LEDs hw
-control for specific link speed. (example scenario a PHY that have 2 LED
-connected one green and one orange where the green is turned on with
-1000mbps speed and orange is turned on with 10mpbs speed)
-
-On mode set from sysfs we check if we have enabled split link speed mode
-and reject enabling generic link mode to prevent wrong and redundant
-configuration.
-
-Rework logic on the set baseline state to support these new modes to
-select if we need to turn on or off the LED.
-
-Add additional modes:
-- link_10: Turn on LED when link speed is 10mbps
-- link_100: Turn on LED when link speed is 100mbps
-- link_1000: Turn on LED when link speed is 1000mbps
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Lee Jones <lee@kernel.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 80 +++++++++++++++++++++++----
- include/linux/leds.h                  |  3 +
- 2 files changed, 73 insertions(+), 10 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -13,6 +13,7 @@
- #include <linux/atomic.h>
- #include <linux/ctype.h>
- #include <linux/device.h>
-+#include <linux/ethtool.h>
- #include <linux/init.h>
- #include <linux/jiffies.h>
- #include <linux/kernel.h>
-@@ -21,6 +22,7 @@
- #include <linux/module.h>
- #include <linux/netdevice.h>
- #include <linux/mutex.h>
-+#include <linux/rtnetlink.h>
- #include <linux/timer.h>
- #include "../leds.h"
- 
-@@ -52,6 +54,8 @@ struct led_netdev_data {
- 	unsigned int last_activity;
- 
- 	unsigned long mode;
-+	int link_speed;
-+
- 	bool carrier_link_up;
- 	bool hw_control;
- };
-@@ -77,7 +81,24 @@ static void set_baseline_state(struct le
- 	if (!trigger_data->carrier_link_up) {
- 		led_set_brightness(led_cdev, LED_OFF);
- 	} else {
-+		bool blink_on = false;
-+
- 		if (test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode))
-+			blink_on = true;
-+
-+		if (test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) &&
-+		    trigger_data->link_speed == SPEED_10)
-+			blink_on = true;
-+
-+		if (test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) &&
-+		    trigger_data->link_speed == SPEED_100)
-+			blink_on = true;
-+
-+		if (test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) &&
-+		    trigger_data->link_speed == SPEED_1000)
-+			blink_on = true;
-+
-+		if (blink_on)
- 			led_set_brightness(led_cdev,
- 					   led_cdev->blink_brightness);
- 		else
-@@ -161,6 +182,18 @@ static bool can_hw_control(struct led_ne
- 	return true;
- }
- 
-+static void get_device_state(struct led_netdev_data *trigger_data)
-+{
-+	struct ethtool_link_ksettings cmd;
-+
-+	trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
-+	if (!trigger_data->carrier_link_up)
-+		return;
-+
-+	if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd))
-+		trigger_data->link_speed = cmd.base.speed;
-+}
-+
- static ssize_t device_name_show(struct device *dev,
- 				struct device_attribute *attr, char *buf)
- {
-@@ -196,8 +229,12 @@ static int set_device_name(struct led_ne
- 		    dev_get_by_name(&init_net, trigger_data->device_name);
- 
- 	trigger_data->carrier_link_up = false;
--	if (trigger_data->net_dev != NULL)
--		trigger_data->carrier_link_up = netif_carrier_ok(trigger_data->net_dev);
-+	trigger_data->link_speed = SPEED_UNKNOWN;
-+	if (trigger_data->net_dev != NULL) {
-+		rtnl_lock();
-+		get_device_state(trigger_data);
-+		rtnl_unlock();
-+	}
- 
- 	trigger_data->last_activity = 0;
- 
-@@ -234,6 +271,9 @@ static ssize_t netdev_led_attr_show(stru
- 
- 	switch (attr) {
- 	case TRIGGER_NETDEV_LINK:
-+	case TRIGGER_NETDEV_LINK_10:
-+	case TRIGGER_NETDEV_LINK_100:
-+	case TRIGGER_NETDEV_LINK_1000:
- 	case TRIGGER_NETDEV_TX:
- 	case TRIGGER_NETDEV_RX:
- 		bit = attr;
-@@ -249,7 +289,7 @@ static ssize_t netdev_led_attr_store(str
- 				     size_t size, enum led_trigger_netdev_modes attr)
- {
- 	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
--	unsigned long state;
-+	unsigned long state, mode = trigger_data->mode;
- 	int ret;
- 	int bit;
- 
-@@ -259,6 +299,9 @@ static ssize_t netdev_led_attr_store(str
- 
- 	switch (attr) {
- 	case TRIGGER_NETDEV_LINK:
-+	case TRIGGER_NETDEV_LINK_10:
-+	case TRIGGER_NETDEV_LINK_100:
-+	case TRIGGER_NETDEV_LINK_1000:
- 	case TRIGGER_NETDEV_TX:
- 	case TRIGGER_NETDEV_RX:
- 		bit = attr;
-@@ -267,13 +310,20 @@ static ssize_t netdev_led_attr_store(str
- 		return -EINVAL;
- 	}
- 
--	cancel_delayed_work_sync(&trigger_data->work);
--
- 	if (state)
--		set_bit(bit, &trigger_data->mode);
-+		set_bit(bit, &mode);
- 	else
--		clear_bit(bit, &trigger_data->mode);
-+		clear_bit(bit, &mode);
-+
-+	if (test_bit(TRIGGER_NETDEV_LINK, &mode) &&
-+	    (test_bit(TRIGGER_NETDEV_LINK_10, &mode) ||
-+	     test_bit(TRIGGER_NETDEV_LINK_100, &mode) ||
-+	     test_bit(TRIGGER_NETDEV_LINK_1000, &mode)))
-+		return -EINVAL;
-+
-+	cancel_delayed_work_sync(&trigger_data->work);
- 
-+	trigger_data->mode = mode;
- 	trigger_data->hw_control = can_hw_control(trigger_data);
- 
- 	set_baseline_state(trigger_data);
-@@ -295,6 +345,9 @@ static ssize_t netdev_led_attr_store(str
- 	static DEVICE_ATTR_RW(trigger_name)
- 
- DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
-+DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
-+DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
-+DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
- DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
- DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
- 
-@@ -338,6 +391,9 @@ static DEVICE_ATTR_RW(interval);
- static struct attribute *netdev_trig_attrs[] = {
- 	&dev_attr_device_name.attr,
- 	&dev_attr_link.attr,
-+	&dev_attr_link_10.attr,
-+	&dev_attr_link_100.attr,
-+	&dev_attr_link_1000.attr,
- 	&dev_attr_rx.attr,
- 	&dev_attr_tx.attr,
- 	&dev_attr_interval.attr,
-@@ -368,9 +424,10 @@ static int netdev_trig_notify(struct not
- 	mutex_lock(&trigger_data->lock);
- 
- 	trigger_data->carrier_link_up = false;
-+	trigger_data->link_speed = SPEED_UNKNOWN;
- 	switch (evt) {
- 	case NETDEV_CHANGENAME:
--		trigger_data->carrier_link_up = netif_carrier_ok(dev);
-+		get_device_state(trigger_data);
- 		fallthrough;
- 	case NETDEV_REGISTER:
- 		if (trigger_data->net_dev)
-@@ -384,7 +441,7 @@ static int netdev_trig_notify(struct not
- 		break;
- 	case NETDEV_UP:
- 	case NETDEV_CHANGE:
--		trigger_data->carrier_link_up = netif_carrier_ok(dev);
-+		get_device_state(trigger_data);
- 		break;
- 	}
- 
-@@ -427,7 +484,10 @@ static void netdev_trig_work(struct work
- 	if (trigger_data->last_activity != new_activity) {
- 		led_stop_software_blink(trigger_data->led_cdev);
- 
--		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode);
-+		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) ||
-+			 test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
-+			 test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
-+			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode);
- 		interval = jiffies_to_msecs(
- 				atomic_read(&trigger_data->interval));
- 		/* base state is ON (link present) */
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -528,6 +528,9 @@ led_trigger_get_brightness(const struct
- /* Trigger specific enum */
- enum led_trigger_netdev_modes {
- 	TRIGGER_NETDEV_LINK = 0,
-+	TRIGGER_NETDEV_LINK_10,
-+	TRIGGER_NETDEV_LINK_100,
-+	TRIGGER_NETDEV_LINK_1000,
- 	TRIGGER_NETDEV_TX,
- 	TRIGGER_NETDEV_RX,
- 
diff --git a/target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch b/target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch
deleted file mode 100644
index 902132699142..000000000000
--- a/target/linux/generic/backport-6.1/805-v6.5-02-leds-trigger-netdev-add-additional-specific-link-dup.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From f22f95b9ff1551c9bab13104131929f33d51f23f Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 19 Jun 2023 22:46:59 +0200
-Subject: [PATCH 2/3] leds: trigger: netdev: add additional specific link
- duplex mode
-
-Add additional modes for specific link duplex. Use ethtool APIs to get the
-current link duplex and enable the LED accordingly. Under netdev event
-handler the rtnl lock is already held and is not needed to be set to
-access ethtool APIs.
-
-This is especially useful for PHY and Switch that supports LEDs hw
-control for specific link duplex.
-
-Add additional modes:
-- half_duplex: Turn on LED when link is half duplex
-- full_duplex: Turn on LED when link is full duplex
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Lee Jones <lee@kernel.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 27 +++++++++++++++++++++++++--
- include/linux/leds.h                  |  2 ++
- 2 files changed, 27 insertions(+), 2 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -55,6 +55,7 @@ struct led_netdev_data {
- 
- 	unsigned long mode;
- 	int link_speed;
-+	u8 duplex;
- 
- 	bool carrier_link_up;
- 	bool hw_control;
-@@ -98,6 +99,14 @@ static void set_baseline_state(struct le
- 		    trigger_data->link_speed == SPEED_1000)
- 			blink_on = true;
- 
-+		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
-+		    trigger_data->duplex == DUPLEX_HALF)
-+			blink_on = true;
-+
-+		if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode) &&
-+		    trigger_data->duplex == DUPLEX_FULL)
-+			blink_on = true;
-+
- 		if (blink_on)
- 			led_set_brightness(led_cdev,
- 					   led_cdev->blink_brightness);
-@@ -190,8 +199,10 @@ static void get_device_state(struct led_
- 	if (!trigger_data->carrier_link_up)
- 		return;
- 
--	if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd))
-+	if (!__ethtool_get_link_ksettings(trigger_data->net_dev, &cmd)) {
- 		trigger_data->link_speed = cmd.base.speed;
-+		trigger_data->duplex = cmd.base.duplex;
-+	}
- }
- 
- static ssize_t device_name_show(struct device *dev,
-@@ -230,6 +241,7 @@ static int set_device_name(struct led_ne
- 
- 	trigger_data->carrier_link_up = false;
- 	trigger_data->link_speed = SPEED_UNKNOWN;
-+	trigger_data->duplex = DUPLEX_UNKNOWN;
- 	if (trigger_data->net_dev != NULL) {
- 		rtnl_lock();
- 		get_device_state(trigger_data);
-@@ -274,6 +286,8 @@ static ssize_t netdev_led_attr_show(stru
- 	case TRIGGER_NETDEV_LINK_10:
- 	case TRIGGER_NETDEV_LINK_100:
- 	case TRIGGER_NETDEV_LINK_1000:
-+	case TRIGGER_NETDEV_HALF_DUPLEX:
-+	case TRIGGER_NETDEV_FULL_DUPLEX:
- 	case TRIGGER_NETDEV_TX:
- 	case TRIGGER_NETDEV_RX:
- 		bit = attr;
-@@ -302,6 +316,8 @@ static ssize_t netdev_led_attr_store(str
- 	case TRIGGER_NETDEV_LINK_10:
- 	case TRIGGER_NETDEV_LINK_100:
- 	case TRIGGER_NETDEV_LINK_1000:
-+	case TRIGGER_NETDEV_HALF_DUPLEX:
-+	case TRIGGER_NETDEV_FULL_DUPLEX:
- 	case TRIGGER_NETDEV_TX:
- 	case TRIGGER_NETDEV_RX:
- 		bit = attr;
-@@ -348,6 +364,8 @@ DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETD
- DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
- DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
- DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
-+DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
-+DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
- DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
- DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
- 
-@@ -394,6 +412,8 @@ static struct attribute *netdev_trig_att
- 	&dev_attr_link_10.attr,
- 	&dev_attr_link_100.attr,
- 	&dev_attr_link_1000.attr,
-+	&dev_attr_full_duplex.attr,
-+	&dev_attr_half_duplex.attr,
- 	&dev_attr_rx.attr,
- 	&dev_attr_tx.attr,
- 	&dev_attr_interval.attr,
-@@ -425,6 +445,7 @@ static int netdev_trig_notify(struct not
- 
- 	trigger_data->carrier_link_up = false;
- 	trigger_data->link_speed = SPEED_UNKNOWN;
-+	trigger_data->duplex = DUPLEX_UNKNOWN;
- 	switch (evt) {
- 	case NETDEV_CHANGENAME:
- 		get_device_state(trigger_data);
-@@ -487,7 +508,9 @@ static void netdev_trig_work(struct work
- 		invert = test_bit(TRIGGER_NETDEV_LINK, &trigger_data->mode) ||
- 			 test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
- 			 test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
--			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode);
-+			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
-+			 test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
-+			 test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
- 		interval = jiffies_to_msecs(
- 				atomic_read(&trigger_data->interval));
- 		/* base state is ON (link present) */
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -531,6 +531,8 @@ enum led_trigger_netdev_modes {
- 	TRIGGER_NETDEV_LINK_10,
- 	TRIGGER_NETDEV_LINK_100,
- 	TRIGGER_NETDEV_LINK_1000,
-+	TRIGGER_NETDEV_HALF_DUPLEX,
-+	TRIGGER_NETDEV_FULL_DUPLEX,
- 	TRIGGER_NETDEV_TX,
- 	TRIGGER_NETDEV_RX,
- 
diff --git a/target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch b/target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch
deleted file mode 100644
index 67528cafe095..000000000000
--- a/target/linux/generic/backport-6.1/805-v6.5-03-leds-trigger-netdev-expose-hw_control-status-via-sys.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From b655892ffd6d89b0c7407e099c40dbde82ee3f03 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Mon, 19 Jun 2023 22:47:00 +0200
-Subject: [PATCH 3/3] leds: trigger: netdev: expose hw_control status via sysfs
-
-Expose hw_control status via sysfs for the netdev trigger to give
-userspace better understanding of the current state of the trigger and
-the LED.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
-Acked-by: Lee Jones <lee@kernel.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -406,6 +406,16 @@ static ssize_t interval_store(struct dev
- 
- static DEVICE_ATTR_RW(interval);
- 
-+static ssize_t hw_control_show(struct device *dev,
-+			       struct device_attribute *attr, char *buf)
-+{
-+	struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
-+
-+	return sprintf(buf, "%d\n", trigger_data->hw_control);
-+}
-+
-+static DEVICE_ATTR_RO(hw_control);
-+
- static struct attribute *netdev_trig_attrs[] = {
- 	&dev_attr_device_name.attr,
- 	&dev_attr_link.attr,
-@@ -417,6 +427,7 @@ static struct attribute *netdev_trig_att
- 	&dev_attr_rx.attr,
- 	&dev_attr_tx.attr,
- 	&dev_attr_interval.attr,
-+	&dev_attr_hw_control.attr,
- 	NULL
- };
- ATTRIBUTE_GROUPS(netdev_trig);
diff --git a/target/linux/generic/backport-6.1/806-v6.5-net-dsa-qca8k-add-support-for-additional-modes-for-n.patch b/target/linux/generic/backport-6.1/806-v6.5-net-dsa-qca8k-add-support-for-additional-modes-for-n.patch
deleted file mode 100644
index ac322e19390a..000000000000
--- a/target/linux/generic/backport-6.1/806-v6.5-net-dsa-qca8k-add-support-for-additional-modes-for-n.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 2555f35a4f428a9bfdf09aa0459dbfdf59a24a9a Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 21 Jun 2023 11:54:09 +0200
-Subject: [PATCH] net: dsa: qca8k: add support for additional modes for netdev
- trigger
-
-The QCA8K switch supports additional modes that can be handled in
-hardware for the LED netdev trigger.
-
-Add these additional modes to further support the Switch LEDs and
-offload more blink modes.
-
-Add additional modes:
-- link_10
-- link_100
-- link_1000
-- half_duplex
-- full_duplex
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
-Link: https://lore.kernel.org/r/20230621095409.25859-1-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/qca/qca8k-leds.c | 20 ++++++++++++++++++++
- 1 file changed, 20 insertions(+)
-
---- a/drivers/net/dsa/qca/qca8k-leds.c
-+++ b/drivers/net/dsa/qca/qca8k-leds.c
-@@ -68,6 +68,16 @@ qca8k_parse_netdev(unsigned long rules,
- 		*offload_trigger |= QCA8K_LED_TX_BLINK_MASK;
- 	if (test_bit(TRIGGER_NETDEV_RX, &rules))
- 		*offload_trigger |= QCA8K_LED_RX_BLINK_MASK;
-+	if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
-+		*offload_trigger |= QCA8K_LED_LINK_10M_EN_MASK;
-+	if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
-+		*offload_trigger |= QCA8K_LED_LINK_100M_EN_MASK;
-+	if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
-+		*offload_trigger |= QCA8K_LED_LINK_1000M_EN_MASK;
-+	if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
-+		*offload_trigger |= QCA8K_LED_HALF_DUPLEX_MASK;
-+	if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
-+		*offload_trigger |= QCA8K_LED_FULL_DUPLEX_MASK;
- 
- 	if (rules && !*offload_trigger)
- 		return -EOPNOTSUPP;
-@@ -322,6 +332,16 @@ qca8k_cled_hw_control_get(struct led_cla
- 		set_bit(TRIGGER_NETDEV_TX, rules);
- 	if (val & QCA8K_LED_RX_BLINK_MASK)
- 		set_bit(TRIGGER_NETDEV_RX, rules);
-+	if (val & QCA8K_LED_LINK_10M_EN_MASK)
-+		set_bit(TRIGGER_NETDEV_LINK_10, rules);
-+	if (val & QCA8K_LED_LINK_100M_EN_MASK)
-+		set_bit(TRIGGER_NETDEV_LINK_100, rules);
-+	if (val & QCA8K_LED_LINK_1000M_EN_MASK)
-+		set_bit(TRIGGER_NETDEV_LINK_1000, rules);
-+	if (val & QCA8K_LED_HALF_DUPLEX_MASK)
-+		set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
-+	if (val & QCA8K_LED_FULL_DUPLEX_MASK)
-+		set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-6.1/807-v6.5-01-net-dsa-mv88e6xxx-pass-directly-chip-structure-to-mv.patch b/target/linux/generic/backport-6.1/807-v6.5-01-net-dsa-mv88e6xxx-pass-directly-chip-structure-to-mv.patch
deleted file mode 100644
index 8c062dc3b4c6..000000000000
--- a/target/linux/generic/backport-6.1/807-v6.5-01-net-dsa-mv88e6xxx-pass-directly-chip-structure-to-mv.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 4f86eb098e18fd0f032877dfa1a7e8c1503ca409 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= <alexis.lothore@bootlin.com>
-Date: Mon, 29 May 2023 10:02:41 +0200
-Subject: [PATCH 1/6] net: dsa: mv88e6xxx: pass directly chip structure to
- mv88e6xxx_phy_is_internal
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Since this function is a simple helper, we do not need to pass a full
-dsa_switch structure, we can directly pass the mv88e6xxx_chip structure.
-Doing so will allow to share this function with any other function
-not manipulating dsa_switch structure but needing info about number of
-internal phys
-
-Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 10 ++++------
- 1 file changed, 4 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -470,10 +470,8 @@ restore_link:
- 	return err;
- }
- 
--static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port)
-+static int mv88e6xxx_phy_is_internal(struct mv88e6xxx_chip *chip, int port)
- {
--	struct mv88e6xxx_chip *chip = ds->priv;
--
- 	return port < chip->info->num_internal_phys;
- }
- 
-@@ -591,7 +589,7 @@ static void mv88e6095_phylink_get_caps(s
- 
- 	config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100;
- 
--	if (mv88e6xxx_phy_is_internal(chip->ds, port)) {
-+	if (mv88e6xxx_phy_is_internal(chip, port)) {
- 		__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
- 	} else {
- 		if (cmode < ARRAY_SIZE(mv88e6185_phy_interface_modes) &&
-@@ -851,7 +849,7 @@ static void mv88e6xxx_get_caps(struct ds
- 	chip->info->ops->phylink_get_caps(chip, port, config);
- 	mv88e6xxx_reg_unlock(chip);
- 
--	if (mv88e6xxx_phy_is_internal(ds, port)) {
-+	if (mv88e6xxx_phy_is_internal(chip, port)) {
- 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
- 			  config->supported_interfaces);
- 		/* Internal ports with no phy-mode need GMII for PHYLIB */
-@@ -872,7 +870,7 @@ static void mv88e6xxx_mac_config(struct
- 
- 	mv88e6xxx_reg_lock(chip);
- 
--	if (mode != MLO_AN_PHY || !mv88e6xxx_phy_is_internal(ds, port)) {
-+	if (mode != MLO_AN_PHY || !mv88e6xxx_phy_is_internal(chip, port)) {
- 		/* In inband mode, the link may come up at any time while the
- 		 * link is not forced down. Force the link down while we
- 		 * reconfigure the interface mode.
diff --git a/target/linux/generic/backport-6.1/807-v6.5-02-net-dsa-mv88e6xxx-use-mv88e6xxx_phy_is_internal-in-m.patch b/target/linux/generic/backport-6.1/807-v6.5-02-net-dsa-mv88e6xxx-use-mv88e6xxx_phy_is_internal-in-m.patch
deleted file mode 100644
index 75a21a931d5e..000000000000
--- a/target/linux/generic/backport-6.1/807-v6.5-02-net-dsa-mv88e6xxx-use-mv88e6xxx_phy_is_internal-in-m.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 73cbfad9296eed004992806e056db5b48583ca41 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= <alexis.lothore@bootlin.com>
-Date: Mon, 29 May 2023 10:02:42 +0200
-Subject: [PATCH 2/6] net: dsa: mv88e6xxx: use mv88e6xxx_phy_is_internal in
- mv88e6xxx_port_ppu_updates
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Make sure to use existing helper to get internal PHYs count instead of
-redoing it manually
-
-Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -484,7 +484,7 @@ static int mv88e6xxx_port_ppu_updates(st
- 	 * report whether the port is internal.
- 	 */
- 	if (chip->info->family == MV88E6XXX_FAMILY_6250)
--		return port < chip->info->num_internal_phys;
-+		return mv88e6xxx_phy_is_internal(chip, port);
- 
- 	err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, &reg);
- 	if (err) {
diff --git a/target/linux/generic/backport-6.1/807-v6.5-03-net-dsa-mv88e6xxx-add-field-to-specify-internal-phys.patch b/target/linux/generic/backport-6.1/807-v6.5-03-net-dsa-mv88e6xxx-add-field-to-specify-internal-phys.patch
deleted file mode 100644
index e24dca819b10..000000000000
--- a/target/linux/generic/backport-6.1/807-v6.5-03-net-dsa-mv88e6xxx-add-field-to-specify-internal-phys.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 1414d30660d201f515a9d877571ceea9ca190b6a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= <alexis.lothore@bootlin.com>
-Date: Mon, 29 May 2023 10:02:43 +0200
-Subject: [PATCH 3/6] net: dsa: mv88e6xxx: add field to specify internal phys
- layout
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-mv88e6xxx currently assumes that switch equipped with internal phys have
-those phys mapped contiguously starting from port 0 (see
-mv88e6xxx_phy_is_internal). However, some switches have internal PHYs but
-NOT starting from port 0. For example 88e6393X, 88E6193X and 88E6191X have
-integrated PHYs available on ports 1 to 8
-To properly support this offset, add a new field to allow specifying an
-internal PHYs layout. If field is not set, default layout is assumed (start
-at port 0)
-
-Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mv88e6xxx/chip.c    | 4 +++-
- drivers/net/dsa/mv88e6xxx/chip.h    | 5 +++++
- drivers/net/dsa/mv88e6xxx/global2.c | 5 ++++-
- 3 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -472,7 +472,9 @@ restore_link:
- 
- static int mv88e6xxx_phy_is_internal(struct mv88e6xxx_chip *chip, int port)
- {
--	return port < chip->info->num_internal_phys;
-+	return port >= chip->info->internal_phys_offset &&
-+		port < chip->info->num_internal_phys +
-+			chip->info->internal_phys_offset;
- }
- 
- static int mv88e6xxx_port_ppu_updates(struct mv88e6xxx_chip *chip, int port)
---- a/drivers/net/dsa/mv88e6xxx/chip.h
-+++ b/drivers/net/dsa/mv88e6xxx/chip.h
-@@ -167,6 +167,11 @@ struct mv88e6xxx_info {
- 
- 	/* Supports PTP */
- 	bool ptp_support;
-+
-+	/* Internal PHY start index. 0 means that internal PHYs range starts at
-+	 * port 0, 1 means internal PHYs range starts at port 1, etc
-+	 */
-+	unsigned int internal_phys_offset;
- };
- 
- struct mv88e6xxx_atu_entry {
---- a/drivers/net/dsa/mv88e6xxx/global2.c
-+++ b/drivers/net/dsa/mv88e6xxx/global2.c
-@@ -1185,8 +1185,11 @@ int mv88e6xxx_g2_irq_mdio_setup(struct m
- 				struct mii_bus *bus)
- {
- 	int phy, irq, err, err_phy;
-+	int phy_start = chip->info->internal_phys_offset;
-+	int phy_end = chip->info->internal_phys_offset +
-+		      chip->info->num_internal_phys;
- 
--	for (phy = 0; phy < chip->info->num_internal_phys; phy++) {
-+	for (phy = phy_start; phy < phy_end; phy++) {
- 		irq = irq_find_mapping(chip->g2_irq.domain, phy);
- 		if (irq < 0) {
- 			err = irq;
diff --git a/target/linux/generic/backport-6.1/807-v6.5-04-net-dsa-mv88e6xxx-fix-88E6393X-family-internal-phys-.patch b/target/linux/generic/backport-6.1/807-v6.5-04-net-dsa-mv88e6xxx-fix-88E6393X-family-internal-phys-.patch
deleted file mode 100644
index 428b7c9b7990..000000000000
--- a/target/linux/generic/backport-6.1/807-v6.5-04-net-dsa-mv88e6xxx-fix-88E6393X-family-internal-phys-.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From eb8c75f82a6711387f3b9e03e28923f3e75a761b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= <alexis.lothore@bootlin.com>
-Date: Mon, 29 May 2023 10:02:44 +0200
-Subject: [PATCH 4/6] net: dsa: mv88e6xxx: fix 88E6393X family internal phys
- layout
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-88E6393X/88E6193X/88E6191X switches have in fact 8 internal PHYs, but those
-are not present starting at port 0: supported ports go from 1 to 8
-
-Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 9 ++++++---
- 1 file changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -5999,7 +5999,8 @@ static const struct mv88e6xxx_info mv88e
- 		.name = "Marvell 88E6191X",
- 		.num_databases = 4096,
- 		.num_ports = 11,	/* 10 + Z80 */
--		.num_internal_phys = 9,
-+		.num_internal_phys = 8,
-+		.internal_phys_offset = 1,
- 		.max_vid = 8191,
- 		.max_sid = 63,
- 		.port_base_addr = 0x0,
-@@ -6022,7 +6023,8 @@ static const struct mv88e6xxx_info mv88e
- 		.name = "Marvell 88E6193X",
- 		.num_databases = 4096,
- 		.num_ports = 11,	/* 10 + Z80 */
--		.num_internal_phys = 9,
-+		.num_internal_phys = 8,
-+		.internal_phys_offset = 1,
- 		.max_vid = 8191,
- 		.max_sid = 63,
- 		.port_base_addr = 0x0,
-@@ -6341,7 +6343,8 @@ static const struct mv88e6xxx_info mv88e
- 		.name = "Marvell 88E6393X",
- 		.num_databases = 4096,
- 		.num_ports = 11,	/* 10 + Z80 */
--		.num_internal_phys = 9,
-+		.num_internal_phys = 8,
-+		.internal_phys_offset = 1,
- 		.max_vid = 8191,
- 		.max_sid = 63,
- 		.port_base_addr = 0x0,
diff --git a/target/linux/generic/backport-6.1/807-v6.5-05-net-dsa-mv88e6xxx-pass-mv88e6xxx_chip-structure-to-p.patch b/target/linux/generic/backport-6.1/807-v6.5-05-net-dsa-mv88e6xxx-pass-mv88e6xxx_chip-structure-to-p.patch
deleted file mode 100644
index e2d3b57cccc1..000000000000
--- a/target/linux/generic/backport-6.1/807-v6.5-05-net-dsa-mv88e6xxx-pass-mv88e6xxx_chip-structure-to-p.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From cef945452c8468efce75ba0dc8420510a5b84af9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= <alexis.lothore@bootlin.com>
-Date: Mon, 29 May 2023 10:02:45 +0200
-Subject: [PATCH 5/6] net: dsa: mv88e6xxx: pass mv88e6xxx_chip structure to
- port_max_speed_mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some switches families have minor differences on supported link speed for
-ports. Instead of redefining a new port_max_speed_mode for each different
-configuration, allow to pass mv88e6xxx_chip structure to allow
-differentiating those chips by known chip id
-
-Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mv88e6xxx/chip.c |  2 +-
- drivers/net/dsa/mv88e6xxx/chip.h |  3 ++-
- drivers/net/dsa/mv88e6xxx/port.c | 12 ++++++++----
- drivers/net/dsa/mv88e6xxx/port.h | 12 ++++++++----
- 4 files changed, 19 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -3350,7 +3350,7 @@ static int mv88e6xxx_setup_port(struct m
- 		caps = pl_config.mac_capabilities;
- 
- 		if (chip->info->ops->port_max_speed_mode)
--			mode = chip->info->ops->port_max_speed_mode(port);
-+			mode = chip->info->ops->port_max_speed_mode(chip, port);
- 		else
- 			mode = PHY_INTERFACE_MODE_NA;
- 
---- a/drivers/net/dsa/mv88e6xxx/chip.h
-+++ b/drivers/net/dsa/mv88e6xxx/chip.h
-@@ -514,7 +514,8 @@ struct mv88e6xxx_ops {
- 				     int speed, int duplex);
- 
- 	/* What interface mode should be used for maximum speed? */
--	phy_interface_t (*port_max_speed_mode)(int port);
-+	phy_interface_t (*port_max_speed_mode)(struct mv88e6xxx_chip *chip,
-+					       int port);
- 
- 	int (*port_tag_remap)(struct mv88e6xxx_chip *chip, int port);
- 
---- a/drivers/net/dsa/mv88e6xxx/port.c
-+++ b/drivers/net/dsa/mv88e6xxx/port.c
-@@ -342,7 +342,8 @@ int mv88e6341_port_set_speed_duplex(stru
- 					       duplex);
- }
- 
--phy_interface_t mv88e6341_port_max_speed_mode(int port)
-+phy_interface_t mv88e6341_port_max_speed_mode(struct mv88e6xxx_chip *chip,
-+					      int port)
- {
- 	if (port == 5)
- 		return PHY_INTERFACE_MODE_2500BASEX;
-@@ -381,7 +382,8 @@ int mv88e6390_port_set_speed_duplex(stru
- 					       duplex);
- }
- 
--phy_interface_t mv88e6390_port_max_speed_mode(int port)
-+phy_interface_t mv88e6390_port_max_speed_mode(struct mv88e6xxx_chip *chip,
-+					      int port)
- {
- 	if (port == 9 || port == 10)
- 		return PHY_INTERFACE_MODE_2500BASEX;
-@@ -403,7 +405,8 @@ int mv88e6390x_port_set_speed_duplex(str
- 					       duplex);
- }
- 
--phy_interface_t mv88e6390x_port_max_speed_mode(int port)
-+phy_interface_t mv88e6390x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
-+					       int port)
- {
- 	if (port == 9 || port == 10)
- 		return PHY_INTERFACE_MODE_XAUI;
-@@ -500,7 +503,8 @@ int mv88e6393x_port_set_speed_duplex(str
- 	return 0;
- }
- 
--phy_interface_t mv88e6393x_port_max_speed_mode(int port)
-+phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
-+					       int port)
- {
- 	if (port == 0 || port == 9 || port == 10)
- 		return PHY_INTERFACE_MODE_10GBASER;
---- a/drivers/net/dsa/mv88e6xxx/port.h
-+++ b/drivers/net/dsa/mv88e6xxx/port.h
-@@ -359,10 +359,14 @@ int mv88e6390x_port_set_speed_duplex(str
- int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
- 				     int speed, int duplex);
- 
--phy_interface_t mv88e6341_port_max_speed_mode(int port);
--phy_interface_t mv88e6390_port_max_speed_mode(int port);
--phy_interface_t mv88e6390x_port_max_speed_mode(int port);
--phy_interface_t mv88e6393x_port_max_speed_mode(int port);
-+phy_interface_t mv88e6341_port_max_speed_mode(struct mv88e6xxx_chip *chip,
-+					      int port);
-+phy_interface_t mv88e6390_port_max_speed_mode(struct mv88e6xxx_chip *chip,
-+					      int port);
-+phy_interface_t mv88e6390x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
-+					       int port);
-+phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
-+					       int port);
- 
- int mv88e6xxx_port_set_state(struct mv88e6xxx_chip *chip, int port, u8 state);
- 
diff --git a/target/linux/generic/backport-6.1/807-v6.5-06-net-dsa-mv88e6xxx-enable-support-for-88E6361-switch.patch b/target/linux/generic/backport-6.1/807-v6.5-06-net-dsa-mv88e6xxx-enable-support-for-88E6361-switch.patch
deleted file mode 100644
index 9a294b59fcbf..000000000000
--- a/target/linux/generic/backport-6.1/807-v6.5-06-net-dsa-mv88e6xxx-enable-support-for-88E6361-switch.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-From 23680321789863bab2d60af507858ce50ff9f56a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Alexis=20Lothor=C3=A9?= <alexis.lothore@bootlin.com>
-Date: Mon, 29 May 2023 10:02:46 +0200
-Subject: [PATCH 6/6] net: dsa: mv88e6xxx: enable support for 88E6361 switch
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Marvell 88E6361 is an 8-port switch derived from the
-88E6393X/88E9193X/88E6191X switches family. It can benefit from the
-existing mv88e6xxx driver by simply adding the proper switch description in
-the driver. Main differences with other switches from this
-family are:
-- 8 ports exposed (instead of 11): ports 1, 2 and 8 not available
-- No 5GBase-x nor SFI/USXGMII support
-
-Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 42 ++++++++++++++++++++++++++++----
- drivers/net/dsa/mv88e6xxx/chip.h |  3 ++-
- drivers/net/dsa/mv88e6xxx/port.c | 14 ++++++++---
- drivers/net/dsa/mv88e6xxx/port.h |  1 +
- 4 files changed, 51 insertions(+), 9 deletions(-)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -809,6 +809,8 @@ static void mv88e6393x_phylink_get_caps(
- 	unsigned long *supported = config->supported_interfaces;
- 	bool is_6191x =
- 		chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6191X;
-+	bool is_6361 =
-+		chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361;
- 
- 	mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
- 
-@@ -823,13 +825,17 @@ static void mv88e6393x_phylink_get_caps(
- 		/* 6191X supports >1G modes only on port 10 */
- 		if (!is_6191x || port == 10) {
- 			__set_bit(PHY_INTERFACE_MODE_2500BASEX, supported);
--			__set_bit(PHY_INTERFACE_MODE_5GBASER, supported);
--			__set_bit(PHY_INTERFACE_MODE_10GBASER, supported);
-+			config->mac_capabilities |= MAC_2500FD;
-+
-+			/* 6361 only supports up to 2500BaseX */
-+			if (!is_6361) {
-+				__set_bit(PHY_INTERFACE_MODE_5GBASER, supported);
-+				__set_bit(PHY_INTERFACE_MODE_10GBASER, supported);
-+				config->mac_capabilities |= MAC_5000FD |
-+					MAC_10000FD;
-+			}
- 			/* FIXME: USXGMII is not supported yet */
- 			/* __set_bit(PHY_INTERFACE_MODE_USXGMII, supported); */
--
--			config->mac_capabilities |= MAC_2500FD | MAC_5000FD |
--				MAC_10000FD;
- 		}
- 	}
- 
-@@ -6286,6 +6292,32 @@ static const struct mv88e6xxx_info mv88e
- 		.ptp_support = true,
- 		.ops = &mv88e6352_ops,
- 	},
-+	[MV88E6361] = {
-+		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6361,
-+		.family = MV88E6XXX_FAMILY_6393,
-+		.name = "Marvell 88E6361",
-+		.num_databases = 4096,
-+		.num_macs = 16384,
-+		.num_ports = 11,
-+		/* Ports 1, 2 and 8 are not routed */
-+		.invalid_port_mask = BIT(1) | BIT(2) | BIT(8),
-+		.num_internal_phys = 5,
-+		.internal_phys_offset = 3,
-+		.max_vid = 4095,
-+		.max_sid = 63,
-+		.port_base_addr = 0x0,
-+		.phy_base_addr = 0x0,
-+		.global1_addr = 0x1b,
-+		.global2_addr = 0x1c,
-+		.age_time_coeff = 3750,
-+		.g1_irqs = 10,
-+		.g2_irqs = 14,
-+		.atu_move_port_mask = 0x1f,
-+		.pvt = true,
-+		.multi_chip = true,
-+		.ptp_support = true,
-+		.ops = &mv88e6393x_ops,
-+	},
- 	[MV88E6390] = {
- 		.prod_num = MV88E6XXX_PORT_SWITCH_ID_PROD_6390,
- 		.family = MV88E6XXX_FAMILY_6390,
---- a/drivers/net/dsa/mv88e6xxx/chip.h
-+++ b/drivers/net/dsa/mv88e6xxx/chip.h
-@@ -82,6 +82,7 @@ enum mv88e6xxx_model {
- 	MV88E6350,
- 	MV88E6351,
- 	MV88E6352,
-+	MV88E6361,
- 	MV88E6390,
- 	MV88E6390X,
- 	MV88E6393X,
-@@ -100,7 +101,7 @@ enum mv88e6xxx_family {
- 	MV88E6XXX_FAMILY_6351,	/* 6171 6175 6350 6351 */
- 	MV88E6XXX_FAMILY_6352,	/* 6172 6176 6240 6352 */
- 	MV88E6XXX_FAMILY_6390,  /* 6190 6190X 6191 6290 6390 6390X */
--	MV88E6XXX_FAMILY_6393,	/* 6191X 6193X 6393X */
-+	MV88E6XXX_FAMILY_6393,	/* 6191X 6193X 6361 6393X */
- };
- 
- /**
---- a/drivers/net/dsa/mv88e6xxx/port.c
-+++ b/drivers/net/dsa/mv88e6xxx/port.c
-@@ -424,6 +424,10 @@ int mv88e6393x_port_set_speed_duplex(str
- 	u16 reg, ctrl;
- 	int err;
- 
-+	if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361 &&
-+	    speed > 2500)
-+		return -EOPNOTSUPP;
-+
- 	if (speed == 200 && port != 0)
- 		return -EOPNOTSUPP;
- 
-@@ -506,10 +510,14 @@ int mv88e6393x_port_set_speed_duplex(str
- phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
- 					       int port)
- {
--	if (port == 0 || port == 9 || port == 10)
--		return PHY_INTERFACE_MODE_10GBASER;
- 
--	return PHY_INTERFACE_MODE_NA;
-+	if (port != 0 && port != 9 && port != 10)
-+		return PHY_INTERFACE_MODE_NA;
-+
-+	if (chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361)
-+		return PHY_INTERFACE_MODE_2500BASEX;
-+
-+	return PHY_INTERFACE_MODE_10GBASER;
- }
- 
- static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
---- a/drivers/net/dsa/mv88e6xxx/port.h
-+++ b/drivers/net/dsa/mv88e6xxx/port.h
-@@ -133,6 +133,7 @@
- #define MV88E6XXX_PORT_SWITCH_ID_PROD_6220	0x2200
- #define MV88E6XXX_PORT_SWITCH_ID_PROD_6240	0x2400
- #define MV88E6XXX_PORT_SWITCH_ID_PROD_6250	0x2500
-+#define MV88E6XXX_PORT_SWITCH_ID_PROD_6361	0x2610
- #define MV88E6XXX_PORT_SWITCH_ID_PROD_6290	0x2900
- #define MV88E6XXX_PORT_SWITCH_ID_PROD_6321	0x3100
- #define MV88E6XXX_PORT_SWITCH_ID_PROD_6141	0x3400
diff --git a/target/linux/generic/backport-6.1/808-v6.2-0001-nvmem-stm32-move-STM32MP15_BSEC_NUM_LOWER-in-config.patch b/target/linux/generic/backport-6.1/808-v6.2-0001-nvmem-stm32-move-STM32MP15_BSEC_NUM_LOWER-in-config.patch
deleted file mode 100644
index 33759632ebe4..000000000000
--- a/target/linux/generic/backport-6.1/808-v6.2-0001-nvmem-stm32-move-STM32MP15_BSEC_NUM_LOWER-in-config.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From fbfc4ca465a1f8d81bf2d67d95bf7fc67c3cf0c2 Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Fri, 18 Nov 2022 06:39:20 +0000
-Subject: [PATCH] nvmem: stm32: move STM32MP15_BSEC_NUM_LOWER in config
-
-Support STM32MP15_BSEC_NUM_LOWER in stm32 romem config to prepare
-the next SoC in STM32MP family.
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 21 ++++++++++++++++-----
- 1 file changed, 16 insertions(+), 5 deletions(-)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -22,16 +22,15 @@
- /* shadow registers offest */
- #define STM32MP15_BSEC_DATA0		0x200
- 
--/* 32 (x 32-bits) lower shadow registers */
--#define STM32MP15_BSEC_NUM_LOWER	32
--
- struct stm32_romem_cfg {
- 	int size;
-+	u8 lower;
- };
- 
- struct stm32_romem_priv {
- 	void __iomem *base;
- 	struct nvmem_config cfg;
-+	u8 lower;
- };
- 
- static int stm32_romem_read(void *context, unsigned int offset, void *buf,
-@@ -85,7 +84,7 @@ static int stm32_bsec_read(void *context
- 	for (i = roffset; (i < roffset + rbytes); i += 4) {
- 		u32 otp = i >> 2;
- 
--		if (otp < STM32MP15_BSEC_NUM_LOWER) {
-+		if (otp < priv->lower) {
- 			/* read lower data from shadow registers */
- 			val = readl_relaxed(
- 				priv->base + STM32MP15_BSEC_DATA0 + i);
-@@ -159,6 +158,8 @@ static int stm32_romem_probe(struct plat
- 	priv->cfg.priv = priv;
- 	priv->cfg.owner = THIS_MODULE;
- 
-+	priv->lower = 0;
-+
- 	cfg = (const struct stm32_romem_cfg *)
- 		of_match_device(dev->driver->of_match_table, dev)->data;
- 	if (!cfg) {
-@@ -167,6 +168,7 @@ static int stm32_romem_probe(struct plat
- 		priv->cfg.reg_read = stm32_romem_read;
- 	} else {
- 		priv->cfg.size = cfg->size;
-+		priv->lower = cfg->lower;
- 		priv->cfg.reg_read = stm32_bsec_read;
- 		priv->cfg.reg_write = stm32_bsec_write;
- 	}
-@@ -174,8 +176,17 @@ static int stm32_romem_probe(struct plat
- 	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg));
- }
- 
-+/*
-+ * STM32MP15 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
-+ * => 96 x 32-bits data words
-+ * - Lower: 1K bits, 2:1 redundancy, incremental bit programming
-+ *   => 32 (x 32-bits) lower shadow registers = words 0 to 31
-+ * - Upper: 2K bits, ECC protection, word programming only
-+ *   => 64 (x 32-bits) = words 32 to 95
-+ */
- static const struct stm32_romem_cfg stm32mp15_bsec_cfg = {
--	.size = 384, /* 96 x 32-bits data words */
-+	.size = 384,
-+	.lower = 32,
- };
- 
- static const struct of_device_id stm32_romem_of_match[] = {
diff --git a/target/linux/generic/backport-6.1/808-v6.2-0002-nvmem-stm32-add-warning-when-upper-OTPs-are-updated.patch b/target/linux/generic/backport-6.1/808-v6.2-0002-nvmem-stm32-add-warning-when-upper-OTPs-are-updated.patch
deleted file mode 100644
index 5791df2606ff..000000000000
--- a/target/linux/generic/backport-6.1/808-v6.2-0002-nvmem-stm32-add-warning-when-upper-OTPs-are-updated.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From d61784e6410f3df2028e6eb91b06ffed37a660e0 Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Fri, 18 Nov 2022 06:39:21 +0000
-Subject: [PATCH] nvmem: stm32: add warning when upper OTPs are updated
-
-As the upper OTPs are ECC protected, they support only one 32 bits word
-programming.
-For a second modification of this word, these ECC become invalid and
-this OTP will be no more accessible, the shadowed value is invalid.
-
-This patch adds a warning to indicate an upper OTP update, because this
-operation is dangerous as OTP is not locked by the driver after the first
-update to avoid a second update.
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -132,6 +132,9 @@ static int stm32_bsec_write(void *contex
- 		}
- 	}
- 
-+	if (offset + bytes >= priv->lower * 4)
-+		dev_warn(dev, "Update of upper OTPs with ECC protection (word programming, only once)\n");
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/backport-6.1/808-v6.2-0003-nvmem-stm32-add-nvmem-type-attribute.patch b/target/linux/generic/backport-6.1/808-v6.2-0003-nvmem-stm32-add-nvmem-type-attribute.patch
deleted file mode 100644
index b83ad69c6b4e..000000000000
--- a/target/linux/generic/backport-6.1/808-v6.2-0003-nvmem-stm32-add-nvmem-type-attribute.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From a3816a7d7c097c1da46aad5f5d1e229b607dce04 Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Fri, 18 Nov 2022 06:39:22 +0000
-Subject: [PATCH] nvmem: stm32: add nvmem type attribute
-
-Inform NVMEM framework of type attribute for stm32-romem as NVMEM_TYPE_OTP
-so userspace is able to know how the data is stored in BSEC.
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -160,6 +160,7 @@ static int stm32_romem_probe(struct plat
- 	priv->cfg.dev = dev;
- 	priv->cfg.priv = priv;
- 	priv->cfg.owner = THIS_MODULE;
-+	priv->cfg.type = NVMEM_TYPE_OTP;
- 
- 	priv->lower = 0;
- 
diff --git a/target/linux/generic/backport-6.1/808-v6.2-0004-nvmem-stm32-fix-spelling-typo-in-comment.patch b/target/linux/generic/backport-6.1/808-v6.2-0004-nvmem-stm32-fix-spelling-typo-in-comment.patch
deleted file mode 100644
index 52ba1e65b567..000000000000
--- a/target/linux/generic/backport-6.1/808-v6.2-0004-nvmem-stm32-fix-spelling-typo-in-comment.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 06aac0e11960a7ddccc1888326b5906d017e0f24 Mon Sep 17 00:00:00 2001
-From: Jiangshan Yi <yijiangshan@kylinos.cn>
-Date: Fri, 18 Nov 2022 06:39:24 +0000
-Subject: [PATCH] nvmem: stm32: fix spelling typo in comment
-
-Fix spelling typo in comment.
-
-Reported-by: k2ci <kernel-bot@kylinos.cn>
-Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -19,7 +19,7 @@
- #define STM32_SMC_WRITE_SHADOW		0x03
- #define STM32_SMC_READ_OTP		0x04
- 
--/* shadow registers offest */
-+/* shadow registers offset */
- #define STM32MP15_BSEC_DATA0		0x200
- 
- struct stm32_romem_cfg {
diff --git a/target/linux/generic/backport-6.1/808-v6.2-0005-nvmem-Kconfig-Fix-spelling-mistake-controlls-control.patch b/target/linux/generic/backport-6.1/808-v6.2-0005-nvmem-Kconfig-Fix-spelling-mistake-controlls-control.patch
deleted file mode 100644
index 8f024f4c1acb..000000000000
--- a/target/linux/generic/backport-6.1/808-v6.2-0005-nvmem-Kconfig-Fix-spelling-mistake-controlls-control.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From fb817c4ef63e8cfb6e77ae4a2875ae854c80708f Mon Sep 17 00:00:00 2001
-From: Colin Ian King <colin.i.king@gmail.com>
-Date: Fri, 18 Nov 2022 06:39:26 +0000
-Subject: [PATCH] nvmem: Kconfig: Fix spelling mistake "controlls" ->
- "controls"
-
-There is a spelling mistake in a Kconfig description. Fix it.
-
-Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -164,7 +164,7 @@ config NVMEM_MICROCHIP_OTPC
- 	depends on ARCH_AT91 || COMPILE_TEST
- 	help
- 	  This driver enable the OTP controller available on Microchip SAMA7G5
--	  SoCs. It controlls the access to the OTP memory connected to it.
-+	  SoCs. It controls the access to the OTP memory connected to it.
- 
- config NVMEM_MTK_EFUSE
- 	tristate "Mediatek SoCs EFUSE support"
diff --git a/target/linux/generic/backport-6.1/808-v6.2-0006-nvmem-u-boot-env-add-Broadcom-format-support.patch b/target/linux/generic/backport-6.1/808-v6.2-0006-nvmem-u-boot-env-add-Broadcom-format-support.patch
deleted file mode 100644
index 861386ad310b..000000000000
--- a/target/linux/generic/backport-6.1/808-v6.2-0006-nvmem-u-boot-env-add-Broadcom-format-support.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From ada84d07af6097b2addd18262668ce6cb9e15206 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 18 Nov 2022 06:39:27 +0000
-Subject: [PATCH] nvmem: u-boot-env: add Broadcom format support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom uses U-Boot for a lot of their bcmbca familiy chipsets. They
-decided to store U-Boot environment data inside U-Boot partition and to
-use a custom header (with "uEnv" magic and env data length).
-
-Add support for Broadcom's specific binding and their custom format.
-
-Ref: 6b0584c19d87 ("dt-bindings: nvmem: u-boot,env: add Broadcom's variant binding")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20221118063932.6418-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/u-boot-env.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -16,6 +16,7 @@
- enum u_boot_env_format {
- 	U_BOOT_FORMAT_SINGLE,
- 	U_BOOT_FORMAT_REDUNDANT,
-+	U_BOOT_FORMAT_BROADCOM,
- };
- 
- struct u_boot_env {
-@@ -40,6 +41,13 @@ struct u_boot_env_image_redundant {
- 	uint8_t data[];
- } __packed;
- 
-+struct u_boot_env_image_broadcom {
-+	__le32 magic;
-+	__le32 len;
-+	__le32 crc32;
-+	uint8_t data[0];
-+} __packed;
-+
- static int u_boot_env_read(void *context, unsigned int offset, void *val,
- 			   size_t bytes)
- {
-@@ -138,6 +146,11 @@ static int u_boot_env_parse(struct u_boo
- 		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, data);
- 		data_offset = offsetof(struct u_boot_env_image_redundant, data);
- 		break;
-+	case U_BOOT_FORMAT_BROADCOM:
-+		crc32_offset = offsetof(struct u_boot_env_image_broadcom, crc32);
-+		crc32_data_offset = offsetof(struct u_boot_env_image_broadcom, data);
-+		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
-+		break;
- 	}
- 	crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
- 	crc32_data_len = priv->mtd->size - crc32_data_offset;
-@@ -202,6 +215,7 @@ static const struct of_device_id u_boot_
- 	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
- 	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
- 	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
-+	{ .compatible = "brcm,env", .data = (void *)U_BOOT_FORMAT_BROADCOM, },
- 	{},
- };
- 
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0001-nvmem-core-remove-spurious-white-space.patch b/target/linux/generic/backport-6.1/809-v6.3-0001-nvmem-core-remove-spurious-white-space.patch
deleted file mode 100644
index 9eec0bc48fef..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0001-nvmem-core-remove-spurious-white-space.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 2e8dc541ae207349b51c65391be625ffe1f86e0c Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Mon, 6 Feb 2023 13:43:41 +0000
-Subject: [PATCH] nvmem: core: remove spurious white space
-
-Remove a spurious white space in for the ida_alloc() call.
-
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -763,7 +763,7 @@ struct nvmem_device *nvmem_register(cons
- 	if (!nvmem)
- 		return ERR_PTR(-ENOMEM);
- 
--	rval  = ida_alloc(&nvmem_ida, GFP_KERNEL);
-+	rval = ida_alloc(&nvmem_ida, GFP_KERNEL);
- 	if (rval < 0) {
- 		kfree(nvmem);
- 		return ERR_PTR(rval);
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0002-nvmem-core-add-an-index-parameter-to-the-cell.patch b/target/linux/generic/backport-6.1/809-v6.3-0002-nvmem-core-add-an-index-parameter-to-the-cell.patch
deleted file mode 100644
index 84ee69b8151a..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0002-nvmem-core-add-an-index-parameter-to-the-cell.patch
+++ /dev/null
@@ -1,180 +0,0 @@
-From 5d8e6e6c10a3d37486d263b16ddc15991a7e4a88 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:46 +0000
-Subject: [PATCH] nvmem: core: add an index parameter to the cell
-
-Sometimes a cell can represend multiple values. For example, a base
-ethernet address stored in the NVMEM can be expanded into multiple
-discreet ones by adding an offset.
-
-For this use case, introduce an index parameter which is then used to
-distiguish between values. This parameter will then be passed to the
-post process hook which can then use it to create different values
-during reading.
-
-At the moment, there is only support for the device tree path. You can
-add the index to the phandle, e.g.
-
-  &net {
-          nvmem-cells = <&base_mac_address 2>;
-          nvmem-cell-names = "mac-address";
-  };
-
-  &nvmem_provider {
-          base_mac_address: base-mac-address@0 {
-                  #nvmem-cell-cells = <1>;
-                  reg = <0 6>;
-          };
-  };
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-13-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 37 ++++++++++++++++++++++++----------
- drivers/nvmem/imx-ocotp.c      |  4 ++--
- include/linux/nvmem-provider.h |  4 ++--
- 3 files changed, 30 insertions(+), 15 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -60,6 +60,7 @@ struct nvmem_cell_entry {
- struct nvmem_cell {
- 	struct nvmem_cell_entry *entry;
- 	const char		*id;
-+	int			index;
- };
- 
- static DEFINE_MUTEX(nvmem_mutex);
-@@ -1121,7 +1122,8 @@ struct nvmem_device *devm_nvmem_device_g
- }
- EXPORT_SYMBOL_GPL(devm_nvmem_device_get);
- 
--static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry, const char *id)
-+static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
-+					    const char *id, int index)
- {
- 	struct nvmem_cell *cell;
- 	const char *name = NULL;
-@@ -1140,6 +1142,7 @@ static struct nvmem_cell *nvmem_create_c
- 
- 	cell->id = name;
- 	cell->entry = entry;
-+	cell->index = index;
- 
- 	return cell;
- }
-@@ -1178,7 +1181,7 @@ nvmem_cell_get_from_lookup(struct device
- 				__nvmem_device_put(nvmem);
- 				cell = ERR_PTR(-ENOENT);
- 			} else {
--				cell = nvmem_create_cell(cell_entry, con_id);
-+				cell = nvmem_create_cell(cell_entry, con_id, 0);
- 				if (IS_ERR(cell))
- 					__nvmem_device_put(nvmem);
- 			}
-@@ -1226,15 +1229,27 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 	struct nvmem_device *nvmem;
- 	struct nvmem_cell_entry *cell_entry;
- 	struct nvmem_cell *cell;
-+	struct of_phandle_args cell_spec;
- 	int index = 0;
-+	int cell_index = 0;
-+	int ret;
- 
- 	/* if cell name exists, find index to the name */
- 	if (id)
- 		index = of_property_match_string(np, "nvmem-cell-names", id);
- 
--	cell_np = of_parse_phandle(np, "nvmem-cells", index);
--	if (!cell_np)
--		return ERR_PTR(-ENOENT);
-+	ret = of_parse_phandle_with_optional_args(np, "nvmem-cells",
-+						  "#nvmem-cell-cells",
-+						  index, &cell_spec);
-+	if (ret)
-+		return ERR_PTR(ret);
-+
-+	if (cell_spec.args_count > 1)
-+		return ERR_PTR(-EINVAL);
-+
-+	cell_np = cell_spec.np;
-+	if (cell_spec.args_count)
-+		cell_index = cell_spec.args[0];
- 
- 	nvmem_np = of_get_parent(cell_np);
- 	if (!nvmem_np) {
-@@ -1256,7 +1271,7 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 		return ERR_PTR(-ENOENT);
- 	}
- 
--	cell = nvmem_create_cell(cell_entry, id);
-+	cell = nvmem_create_cell(cell_entry, id, cell_index);
- 	if (IS_ERR(cell))
- 		__nvmem_device_put(nvmem);
- 
-@@ -1409,8 +1424,8 @@ static void nvmem_shift_read_buffer_in_p
- }
- 
- static int __nvmem_cell_read(struct nvmem_device *nvmem,
--		      struct nvmem_cell_entry *cell,
--		      void *buf, size_t *len, const char *id)
-+			     struct nvmem_cell_entry *cell,
-+			     void *buf, size_t *len, const char *id, int index)
- {
- 	int rc;
- 
-@@ -1424,7 +1439,7 @@ static int __nvmem_cell_read(struct nvme
- 		nvmem_shift_read_buffer_in_place(cell, buf);
- 
- 	if (nvmem->cell_post_process) {
--		rc = nvmem->cell_post_process(nvmem->priv, id,
-+		rc = nvmem->cell_post_process(nvmem->priv, id, index,
- 					      cell->offset, buf, cell->bytes);
- 		if (rc)
- 			return rc;
-@@ -1459,7 +1474,7 @@ void *nvmem_cell_read(struct nvmem_cell
- 	if (!buf)
- 		return ERR_PTR(-ENOMEM);
- 
--	rc = __nvmem_cell_read(nvmem, cell->entry, buf, len, cell->id);
-+	rc = __nvmem_cell_read(nvmem, cell->entry, buf, len, cell->id, cell->index);
- 	if (rc) {
- 		kfree(buf);
- 		return ERR_PTR(rc);
-@@ -1772,7 +1787,7 @@ ssize_t nvmem_device_cell_read(struct nv
- 	if (rc)
- 		return rc;
- 
--	rc = __nvmem_cell_read(nvmem, &cell, buf, &len, NULL);
-+	rc = __nvmem_cell_read(nvmem, &cell, buf, &len, NULL, 0);
- 	if (rc)
- 		return rc;
- 
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -222,8 +222,8 @@ read_end:
- 	return ret;
- }
- 
--static int imx_ocotp_cell_pp(void *context, const char *id, unsigned int offset,
--			     void *data, size_t bytes)
-+static int imx_ocotp_cell_pp(void *context, const char *id, int index,
-+			     unsigned int offset, void *data, size_t bytes)
- {
- 	struct ocotp_priv *priv = context;
- 
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -20,8 +20,8 @@ typedef int (*nvmem_reg_read_t)(void *pr
- typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
- 				 void *val, size_t bytes);
- /* used for vendor specific post processing of cell data */
--typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, unsigned int offset,
--					  void *buf, size_t bytes);
-+typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, int index,
-+					 unsigned int offset, void *buf, size_t bytes);
- 
- enum nvmem_type {
- 	NVMEM_TYPE_UNKNOWN = 0,
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0003-nvmem-core-move-struct-nvmem_cell_info-to-nvmem-prov.patch b/target/linux/generic/backport-6.1/809-v6.3-0003-nvmem-core-move-struct-nvmem_cell_info-to-nvmem-prov.patch
deleted file mode 100644
index f3829b3e17f4..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0003-nvmem-core-move-struct-nvmem_cell_info-to-nvmem-prov.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From fbd03d27776c6121a483921601418e3c8f0ff37e Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:47 +0000
-Subject: [PATCH] nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
-
-struct nvmem_cell_info is used to describe a cell. Thus this should
-really be in the nvmem-provider's header. There are two (unused) nvmem
-access methods which use the nvmem_cell_info to describe the cell to be
-accesses. One can argue, that they will create a cell before accessing,
-thus they are both a provider and a consumer.
-
-struct nvmem_cell_info will get used more and more by nvmem-providers,
-don't force them to also include the consumer header, although they are
-not.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-14-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- include/linux/nvmem-consumer.h | 10 +---------
- include/linux/nvmem-provider.h | 19 ++++++++++++++++++-
- 2 files changed, 19 insertions(+), 10 deletions(-)
-
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -18,15 +18,7 @@ struct device_node;
- /* consumer cookie */
- struct nvmem_cell;
- struct nvmem_device;
--
--struct nvmem_cell_info {
--	const char		*name;
--	unsigned int		offset;
--	unsigned int		bytes;
--	unsigned int		bit_offset;
--	unsigned int		nbits;
--	struct device_node	*np;
--};
-+struct nvmem_cell_info;
- 
- /**
-  * struct nvmem_cell_lookup - cell lookup entry
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -14,7 +14,6 @@
- #include <linux/gpio/consumer.h>
- 
- struct nvmem_device;
--struct nvmem_cell_info;
- typedef int (*nvmem_reg_read_t)(void *priv, unsigned int offset,
- 				void *val, size_t bytes);
- typedef int (*nvmem_reg_write_t)(void *priv, unsigned int offset,
-@@ -48,6 +47,24 @@ struct nvmem_keepout {
- };
- 
- /**
-+ * struct nvmem_cell_info - NVMEM cell description
-+ * @name:	Name.
-+ * @offset:	Offset within the NVMEM device.
-+ * @bytes:	Length of the cell.
-+ * @bit_offset:	Bit offset if cell is smaller than a byte.
-+ * @nbits:	Number of bits.
-+ * @np:		Optional device_node pointer.
-+ */
-+struct nvmem_cell_info {
-+	const char		*name;
-+	unsigned int		offset;
-+	unsigned int		bytes;
-+	unsigned int		bit_offset;
-+	unsigned int		nbits;
-+	struct device_node	*np;
-+};
-+
-+/**
-  * struct nvmem_config - NVMEM device configuration
-  *
-  * @dev:	Parent device.
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0004-nvmem-core-drop-the-removal-of-the-cells-in-nvmem_ad.patch b/target/linux/generic/backport-6.1/809-v6.3-0004-nvmem-core-drop-the-removal-of-the-cells-in-nvmem_ad.patch
deleted file mode 100644
index b20c500e7ce0..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0004-nvmem-core-drop-the-removal-of-the-cells-in-nvmem_ad.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From cc5bdd323dde6494623f3ffe3a5b887fa21cd375 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:48 +0000
-Subject: [PATCH] nvmem: core: drop the removal of the cells in
- nvmem_add_cells()
-
-If nvmem_add_cells() fails, the whole nvmem_register() will fail
-and the cells will then be removed anyway. This is a preparation
-to introduce a nvmem_add_one_cell() which can then be used by
-nvmem_add_cells().
-
-This is then the same to what nvmem_add_cells_from_table() and
-nvmem_add_cells_from_of() do.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-15-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 14 ++++----------
- 1 file changed, 4 insertions(+), 10 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -514,7 +514,7 @@ static int nvmem_add_cells(struct nvmem_
- 		    int ncells)
- {
- 	struct nvmem_cell_entry **cells;
--	int i, rval;
-+	int i, rval = 0;
- 
- 	cells = kcalloc(ncells, sizeof(*cells), GFP_KERNEL);
- 	if (!cells)
-@@ -524,28 +524,22 @@ static int nvmem_add_cells(struct nvmem_
- 		cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL);
- 		if (!cells[i]) {
- 			rval = -ENOMEM;
--			goto err;
-+			goto out;
- 		}
- 
- 		rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, &info[i], cells[i]);
- 		if (rval) {
- 			kfree(cells[i]);
--			goto err;
-+			goto out;
- 		}
- 
- 		nvmem_cell_entry_add(cells[i]);
- 	}
- 
-+out:
- 	/* remove tmp array */
- 	kfree(cells);
- 
--	return 0;
--err:
--	while (i--)
--		nvmem_cell_entry_drop(cells[i]);
--
--	kfree(cells);
--
- 	return rval;
- }
- 
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0005-nvmem-core-add-nvmem_add_one_cell.patch b/target/linux/generic/backport-6.1/809-v6.3-0005-nvmem-core-add-nvmem_add_one_cell.patch
deleted file mode 100644
index df4a02b8c500..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0005-nvmem-core-add-nvmem_add_one_cell.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 2ded6830d376d5e7bf43d59f7f7fdf1a59abc676 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:49 +0000
-Subject: [PATCH] nvmem: core: add nvmem_add_one_cell()
-
-Add a new function to add exactly one cell. This will be used by the
-nvmem layout drivers to add custom cells. In contrast to the
-nvmem_add_cells(), this has the advantage that we don't have to assemble
-a list of cells on runtime.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-16-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 59 ++++++++++++++++++++--------------
- include/linux/nvmem-provider.h |  8 +++++
- 2 files changed, 43 insertions(+), 24 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -501,6 +501,36 @@ static int nvmem_cell_info_to_nvmem_cell
- }
- 
- /**
-+ * nvmem_add_one_cell() - Add one cell information to an nvmem device
-+ *
-+ * @nvmem: nvmem device to add cells to.
-+ * @info: nvmem cell info to add to the device
-+ *
-+ * Return: 0 or negative error code on failure.
-+ */
-+int nvmem_add_one_cell(struct nvmem_device *nvmem,
-+		       const struct nvmem_cell_info *info)
-+{
-+	struct nvmem_cell_entry *cell;
-+	int rval;
-+
-+	cell = kzalloc(sizeof(*cell), GFP_KERNEL);
-+	if (!cell)
-+		return -ENOMEM;
-+
-+	rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, info, cell);
-+	if (rval) {
-+		kfree(cell);
-+		return rval;
-+	}
-+
-+	nvmem_cell_entry_add(cell);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(nvmem_add_one_cell);
-+
-+/**
-  * nvmem_add_cells() - Add cell information to an nvmem device
-  *
-  * @nvmem: nvmem device to add cells to.
-@@ -513,34 +543,15 @@ static int nvmem_add_cells(struct nvmem_
- 		    const struct nvmem_cell_info *info,
- 		    int ncells)
- {
--	struct nvmem_cell_entry **cells;
--	int i, rval = 0;
--
--	cells = kcalloc(ncells, sizeof(*cells), GFP_KERNEL);
--	if (!cells)
--		return -ENOMEM;
-+	int i, rval;
- 
- 	for (i = 0; i < ncells; i++) {
--		cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL);
--		if (!cells[i]) {
--			rval = -ENOMEM;
--			goto out;
--		}
--
--		rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, &info[i], cells[i]);
--		if (rval) {
--			kfree(cells[i]);
--			goto out;
--		}
--
--		nvmem_cell_entry_add(cells[i]);
-+		rval = nvmem_add_one_cell(nvmem, &info[i]);
-+		if (rval)
-+			return rval;
- 	}
- 
--out:
--	/* remove tmp array */
--	kfree(cells);
--
--	return rval;
-+	return 0;
- }
- 
- /**
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -153,6 +153,9 @@ struct nvmem_device *devm_nvmem_register
- void nvmem_add_cell_table(struct nvmem_cell_table *table);
- void nvmem_del_cell_table(struct nvmem_cell_table *table);
- 
-+int nvmem_add_one_cell(struct nvmem_device *nvmem,
-+		       const struct nvmem_cell_info *info);
-+
- #else
- 
- static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c)
-@@ -170,6 +173,11 @@ devm_nvmem_register(struct device *dev,
- 
- static inline void nvmem_add_cell_table(struct nvmem_cell_table *table) {}
- static inline void nvmem_del_cell_table(struct nvmem_cell_table *table) {}
-+static inline int nvmem_add_one_cell(struct nvmem_device *nvmem,
-+				     const struct nvmem_cell_info *info)
-+{
-+	return -EOPNOTSUPP;
-+}
- 
- #endif /* CONFIG_NVMEM */
- #endif  /* ifndef _LINUX_NVMEM_PROVIDER_H */
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0006-nvmem-core-use-nvmem_add_one_cell-in-nvmem_add_cells.patch b/target/linux/generic/backport-6.1/809-v6.3-0006-nvmem-core-use-nvmem_add_one_cell-in-nvmem_add_cells.patch
deleted file mode 100644
index 1b4a3f3ef319..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0006-nvmem-core-use-nvmem_add_one_cell-in-nvmem_add_cells.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 50014d659617dc58780a5d31ceb76c82779a9d8b Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:50 +0000
-Subject: [PATCH] nvmem: core: use nvmem_add_one_cell() in
- nvmem_add_cells_from_of()
-
-Convert nvmem_add_cells_from_of() to use the new nvmem_add_one_cell().
-This will remove duplicate code and it will make it possible to add a
-hook to a nvmem layout in between, which can change fields before the
-cell is finally added.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-17-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 45 ++++++++++++++------------------------------
- 1 file changed, 14 insertions(+), 31 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -687,15 +687,14 @@ static int nvmem_validate_keepouts(struc
- 
- static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
- {
--	struct device_node *parent, *child;
- 	struct device *dev = &nvmem->dev;
--	struct nvmem_cell_entry *cell;
-+	struct device_node *child;
- 	const __be32 *addr;
--	int len;
-+	int len, ret;
- 
--	parent = dev->of_node;
-+	for_each_child_of_node(dev->of_node, child) {
-+		struct nvmem_cell_info info = {0};
- 
--	for_each_child_of_node(parent, child) {
- 		addr = of_get_property(child, "reg", &len);
- 		if (!addr)
- 			continue;
-@@ -705,40 +704,24 @@ static int nvmem_add_cells_from_of(struc
- 			return -EINVAL;
- 		}
- 
--		cell = kzalloc(sizeof(*cell), GFP_KERNEL);
--		if (!cell) {
--			of_node_put(child);
--			return -ENOMEM;
--		}
--
--		cell->nvmem = nvmem;
--		cell->offset = be32_to_cpup(addr++);
--		cell->bytes = be32_to_cpup(addr);
--		cell->name = kasprintf(GFP_KERNEL, "%pOFn", child);
-+		info.offset = be32_to_cpup(addr++);
-+		info.bytes = be32_to_cpup(addr);
-+		info.name = kasprintf(GFP_KERNEL, "%pOFn", child);
- 
- 		addr = of_get_property(child, "bits", &len);
- 		if (addr && len == (2 * sizeof(u32))) {
--			cell->bit_offset = be32_to_cpup(addr++);
--			cell->nbits = be32_to_cpup(addr);
-+			info.bit_offset = be32_to_cpup(addr++);
-+			info.nbits = be32_to_cpup(addr);
- 		}
- 
--		if (cell->nbits)
--			cell->bytes = DIV_ROUND_UP(
--					cell->nbits + cell->bit_offset,
--					BITS_PER_BYTE);
--
--		if (!IS_ALIGNED(cell->offset, nvmem->stride)) {
--			dev_err(dev, "cell %s unaligned to nvmem stride %d\n",
--				cell->name, nvmem->stride);
--			/* Cells already added will be freed later. */
--			kfree_const(cell->name);
--			kfree(cell);
-+		info.np = of_node_get(child);
-+
-+		ret = nvmem_add_one_cell(nvmem, &info);
-+		kfree(info.name);
-+		if (ret) {
- 			of_node_put(child);
--			return -EINVAL;
-+			return ret;
- 		}
--
--		cell->np = of_node_get(child);
--		nvmem_cell_entry_add(cell);
- 	}
- 
- 	return 0;
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0007-nvmem-stm32-add-OP-TEE-support-for-STM32MP13x.patch b/target/linux/generic/backport-6.1/809-v6.3-0007-nvmem-stm32-add-OP-TEE-support-for-STM32MP13x.patch
deleted file mode 100644
index 172a78b76af1..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0007-nvmem-stm32-add-OP-TEE-support-for-STM32MP13x.patch
+++ /dev/null
@@ -1,562 +0,0 @@
-From 6a0bc3522e746025e2d9a63ab2cb5d7062c2d39c Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Mon, 6 Feb 2023 13:43:51 +0000
-Subject: [PATCH] nvmem: stm32: add OP-TEE support for STM32MP13x
-
-For boot with OP-TEE on STM32MP13, the communication with the secure
-world no more use STMicroelectronics SMC but communication with the
-STM32MP BSEC TA, for data access (read/write) or lock operation:
-- all the request are sent to OP-TEE trusted application,
-- for upper OTP with ECC protection and with word programming only
-  each OTP are permanently locked when programmed to avoid ECC error
-  on the second write operation
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-18-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig               |  11 +
- drivers/nvmem/Makefile              |   1 +
- drivers/nvmem/stm32-bsec-optee-ta.c | 298 ++++++++++++++++++++++++++++
- drivers/nvmem/stm32-bsec-optee-ta.h |  80 ++++++++
- drivers/nvmem/stm32-romem.c         |  54 ++++-
- 5 files changed, 441 insertions(+), 3 deletions(-)
- create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.c
- create mode 100644 drivers/nvmem/stm32-bsec-optee-ta.h
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -290,9 +290,20 @@ config NVMEM_SPRD_EFUSE
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-sprd-efuse.
- 
-+config NVMEM_STM32_BSEC_OPTEE_TA
-+	bool "STM32MP BSEC OP-TEE TA support for nvmem-stm32-romem driver"
-+	depends on OPTEE
-+	help
-+	  Say y here to enable the accesses to STM32MP SoC OTPs by the OP-TEE
-+	  trusted application STM32MP BSEC.
-+
-+	  This library is a used by stm32-romem driver or included in the module
-+	  called nvmem-stm32-romem.
-+
- config NVMEM_STM32_ROMEM
- 	tristate "STMicroelectronics STM32 factory-programmed memory support"
- 	depends on ARCH_STM32 || COMPILE_TEST
-+	imply NVMEM_STM32_BSEC_OPTEE_TA
- 	help
- 	  Say y here to enable read-only access for STMicroelectronics STM32
- 	  factory-programmed memory area.
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -61,6 +61,7 @@ obj-$(CONFIG_NVMEM_SPRD_EFUSE)		+= nvmem
- nvmem_sprd_efuse-y			:= sprd-efuse.o
- obj-$(CONFIG_NVMEM_STM32_ROMEM)		+= nvmem_stm32_romem.o
- nvmem_stm32_romem-y 			:= stm32-romem.o
-+nvmem_stm32_romem-$(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA) += stm32-bsec-optee-ta.o
- obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
- nvmem_sunplus_ocotp-y			:= sunplus-ocotp.o
- obj-$(CONFIG_NVMEM_SUNXI_SID)		+= nvmem_sunxi_sid.o
---- /dev/null
-+++ b/drivers/nvmem/stm32-bsec-optee-ta.c
-@@ -0,0 +1,298 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
-+ *
-+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
-+ */
-+
-+#include <linux/tee_drv.h>
-+
-+#include "stm32-bsec-optee-ta.h"
-+
-+/*
-+ * Read OTP memory
-+ *
-+ * [in]		value[0].a		OTP start offset in byte
-+ * [in]		value[0].b		Access type (0:shadow, 1:fuse, 2:lock)
-+ * [out]	memref[1].buffer	Output buffer to store read values
-+ * [out]	memref[1].size		Size of OTP to be read
-+ *
-+ * Return codes:
-+ * TEE_SUCCESS - Invoke command success
-+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
-+ * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
-+ */
-+#define PTA_BSEC_READ_MEM		0x0
-+
-+/*
-+ * Write OTP memory
-+ *
-+ * [in]		value[0].a		OTP start offset in byte
-+ * [in]		value[0].b		Access type (0:shadow, 1:fuse, 2:lock)
-+ * [in]		memref[1].buffer	Input buffer to read values
-+ * [in]		memref[1].size		Size of OTP to be written
-+ *
-+ * Return codes:
-+ * TEE_SUCCESS - Invoke command success
-+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
-+ * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
-+ */
-+#define PTA_BSEC_WRITE_MEM		0x1
-+
-+/* value of PTA_BSEC access type = value[in] b */
-+#define SHADOW_ACCESS	0
-+#define FUSE_ACCESS	1
-+#define LOCK_ACCESS	2
-+
-+/* Bitfield definition for LOCK status */
-+#define LOCK_PERM			BIT(30)
-+
-+/* OP-TEE STM32MP BSEC TA UUID */
-+static const uuid_t stm32mp_bsec_ta_uuid =
-+	UUID_INIT(0x94cf71ad, 0x80e6, 0x40b5,
-+		  0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03);
-+
-+/*
-+ * Check whether this driver supports the BSEC TA in the TEE instance
-+ * represented by the params (ver/data) to this function.
-+ */
-+static int stm32_bsec_optee_ta_match(struct tee_ioctl_version_data *ver,
-+				     const void *data)
-+{
-+	/* Currently this driver only supports GP compliant, OP-TEE based TA */
-+	if ((ver->impl_id == TEE_IMPL_ID_OPTEE) &&
-+		(ver->gen_caps & TEE_GEN_CAP_GP))
-+		return 1;
-+	else
-+		return 0;
-+}
-+
-+/* Open a session to OP-TEE for STM32MP BSEC TA */
-+static int stm32_bsec_ta_open_session(struct tee_context *ctx, u32 *id)
-+{
-+	struct tee_ioctl_open_session_arg sess_arg;
-+	int rc;
-+
-+	memset(&sess_arg, 0, sizeof(sess_arg));
-+	export_uuid(sess_arg.uuid, &stm32mp_bsec_ta_uuid);
-+	sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
-+	sess_arg.num_params = 0;
-+
-+	rc = tee_client_open_session(ctx, &sess_arg, NULL);
-+	if ((rc < 0) || (sess_arg.ret != 0)) {
-+		pr_err("%s: tee_client_open_session failed err:%#x, ret:%#x\n",
-+		       __func__, sess_arg.ret, rc);
-+		if (!rc)
-+			rc = -EINVAL;
-+	} else {
-+		*id = sess_arg.session;
-+	}
-+
-+	return rc;
-+}
-+
-+/* close a session to OP-TEE for STM32MP BSEC TA */
-+static void stm32_bsec_ta_close_session(void *ctx, u32 id)
-+{
-+	tee_client_close_session(ctx, id);
-+}
-+
-+/* stm32_bsec_optee_ta_open() - initialize the STM32MP BSEC TA */
-+int stm32_bsec_optee_ta_open(struct tee_context **ctx)
-+{
-+	struct tee_context *tee_ctx;
-+	u32 session_id;
-+	int rc;
-+
-+	/* Open context with TEE driver */
-+	tee_ctx = tee_client_open_context(NULL, stm32_bsec_optee_ta_match, NULL, NULL);
-+	if (IS_ERR(tee_ctx)) {
-+		rc = PTR_ERR(tee_ctx);
-+		if (rc == -ENOENT)
-+			return -EPROBE_DEFER;
-+		pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc);
-+
-+		return rc;
-+	}
-+
-+	/* Check STM32MP BSEC TA presence */
-+	rc = stm32_bsec_ta_open_session(tee_ctx, &session_id);
-+	if (rc) {
-+		tee_client_close_context(tee_ctx);
-+		return rc;
-+	}
-+
-+	stm32_bsec_ta_close_session(tee_ctx, session_id);
-+
-+	*ctx = tee_ctx;
-+
-+	return 0;
-+}
-+
-+/* stm32_bsec_optee_ta_open() - release the PTA STM32MP BSEC TA */
-+void stm32_bsec_optee_ta_close(void *ctx)
-+{
-+	tee_client_close_context(ctx);
-+}
-+
-+/* stm32_bsec_optee_ta_read() - nvmem read access using PTA client driver */
-+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
-+			     void *buf, size_t bytes)
-+{
-+	struct tee_shm *shm;
-+	struct tee_ioctl_invoke_arg arg;
-+	struct tee_param param[2];
-+	u8 *shm_buf;
-+	u32 start, num_bytes;
-+	int ret;
-+	u32 session_id;
-+
-+	ret = stm32_bsec_ta_open_session(ctx, &session_id);
-+	if (ret)
-+		return ret;
-+
-+	memset(&arg, 0, sizeof(arg));
-+	memset(&param, 0, sizeof(param));
-+
-+	arg.func = PTA_BSEC_READ_MEM;
-+	arg.session = session_id;
-+	arg.num_params = 2;
-+
-+	/* align access on 32bits */
-+	start = ALIGN_DOWN(offset, 4);
-+	num_bytes = round_up(offset + bytes - start, 4);
-+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
-+	param[0].u.value.a = start;
-+	param[0].u.value.b = SHADOW_ACCESS;
-+
-+	shm = tee_shm_alloc_kernel_buf(ctx, num_bytes);
-+	if (IS_ERR(shm)) {
-+		ret = PTR_ERR(shm);
-+		goto out_tee_session;
-+	}
-+
-+	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
-+	param[1].u.memref.shm = shm;
-+	param[1].u.memref.size = num_bytes;
-+
-+	ret = tee_client_invoke_func(ctx, &arg, param);
-+	if (ret < 0 || arg.ret != 0) {
-+		pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n",
-+			arg.ret, ret);
-+		if (!ret)
-+			ret = -EIO;
-+	}
-+	if (!ret) {
-+		shm_buf = tee_shm_get_va(shm, 0);
-+		if (IS_ERR(shm_buf)) {
-+			ret = PTR_ERR(shm_buf);
-+			pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
-+		} else {
-+			/* read data from 32 bits aligned buffer */
-+			memcpy(buf, &shm_buf[offset % 4], bytes);
-+		}
-+	}
-+
-+	tee_shm_free(shm);
-+
-+out_tee_session:
-+	stm32_bsec_ta_close_session(ctx, session_id);
-+
-+	return ret;
-+}
-+
-+/* stm32_bsec_optee_ta_write() - nvmem write access using PTA client driver */
-+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
-+			      unsigned int offset, void *buf, size_t bytes)
-+{	struct tee_shm *shm;
-+	struct tee_ioctl_invoke_arg arg;
-+	struct tee_param param[2];
-+	u8 *shm_buf;
-+	int ret;
-+	u32 session_id;
-+
-+	ret = stm32_bsec_ta_open_session(ctx, &session_id);
-+	if (ret)
-+		return ret;
-+
-+	/* Allow only writing complete 32-bits aligned words */
-+	if ((bytes % 4) || (offset % 4))
-+		return -EINVAL;
-+
-+	memset(&arg, 0, sizeof(arg));
-+	memset(&param, 0, sizeof(param));
-+
-+	arg.func = PTA_BSEC_WRITE_MEM;
-+	arg.session = session_id;
-+	arg.num_params = 2;
-+
-+	param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
-+	param[0].u.value.a = offset;
-+	param[0].u.value.b = FUSE_ACCESS;
-+
-+	shm = tee_shm_alloc_kernel_buf(ctx, bytes);
-+	if (IS_ERR(shm)) {
-+		ret = PTR_ERR(shm);
-+		goto out_tee_session;
-+	}
-+
-+	param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
-+	param[1].u.memref.shm = shm;
-+	param[1].u.memref.size = bytes;
-+
-+	shm_buf = tee_shm_get_va(shm, 0);
-+	if (IS_ERR(shm_buf)) {
-+		ret = PTR_ERR(shm_buf);
-+		pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
-+		tee_shm_free(shm);
-+
-+		goto out_tee_session;
-+	}
-+
-+	memcpy(shm_buf, buf, bytes);
-+
-+	ret = tee_client_invoke_func(ctx, &arg, param);
-+	if (ret < 0 || arg.ret != 0) {
-+		pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
-+		if (!ret)
-+			ret = -EIO;
-+	}
-+	pr_debug("Write OTPs %d to %zu, ret=%d\n", offset / 4, (offset + bytes) / 4, ret);
-+
-+	/* Lock the upper OTPs with ECC protection, word programming only */
-+	if (!ret && ((offset + bytes) >= (lower * 4))) {
-+		u32 start, nb_lock;
-+		u32 *lock = (u32 *)shm_buf;
-+		int i;
-+
-+		/*
-+		 * don't lock the lower OTPs, no ECC protection and incremental
-+		 * bit programming, a second write is allowed
-+		 */
-+		start = max_t(u32, offset, lower * 4);
-+		nb_lock = (offset + bytes - start) / 4;
-+
-+		param[0].u.value.a = start;
-+		param[0].u.value.b = LOCK_ACCESS;
-+		param[1].u.memref.size = nb_lock * 4;
-+
-+		for (i = 0; i < nb_lock; i++)
-+			lock[i] = LOCK_PERM;
-+
-+		ret = tee_client_invoke_func(ctx, &arg, param);
-+		if (ret < 0 || arg.ret != 0) {
-+			pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
-+			if (!ret)
-+				ret = -EIO;
-+		}
-+		pr_debug("Lock upper OTPs %d to %d, ret=%d\n",
-+			 start / 4, start / 4 + nb_lock, ret);
-+	}
-+
-+	tee_shm_free(shm);
-+
-+out_tee_session:
-+	stm32_bsec_ta_close_session(ctx, session_id);
-+
-+	return ret;
-+}
---- /dev/null
-+++ b/drivers/nvmem/stm32-bsec-optee-ta.h
-@@ -0,0 +1,80 @@
-+/* SPDX-License-Identifier: GPL-2.0-or-later */
-+/*
-+ * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
-+ *
-+ * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
-+ */
-+
-+#if IS_ENABLED(CONFIG_NVMEM_STM32_BSEC_OPTEE_TA)
-+/**
-+ * stm32_bsec_optee_ta_open() - initialize the STM32 BSEC TA
-+ * @ctx: the OP-TEE context on success
-+ *
-+ * Return:
-+ *	On success, 0. On failure, -errno.
-+ */
-+int stm32_bsec_optee_ta_open(struct tee_context **ctx);
-+
-+/**
-+ * stm32_bsec_optee_ta_close() - release the STM32 BSEC TA
-+ * @ctx: the OP-TEE context
-+ *
-+ * This function used to clean the OP-TEE resources initialized in
-+ * stm32_bsec_optee_ta_open(); it can be used as callback to
-+ * devm_add_action_or_reset()
-+ */
-+void stm32_bsec_optee_ta_close(void *ctx);
-+
-+/**
-+ * stm32_bsec_optee_ta_read() - nvmem read access using TA client driver
-+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
-+ * @offset: nvmem offset
-+ * @buf: buffer to fill with nvem values
-+ * @bytes: number of bytes to read
-+ *
-+ * Return:
-+ *	On success, 0. On failure, -errno.
-+ */
-+int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
-+			     void *buf, size_t bytes);
-+
-+/**
-+ * stm32_bsec_optee_ta_write() - nvmem write access using TA client driver
-+ * @ctx: the OP-TEE context provided by stm32_bsec_optee_ta_open
-+ * @lower: number of lower OTP, not protected by ECC
-+ * @offset: nvmem offset
-+ * @buf: buffer with nvem values
-+ * @bytes: number of bytes to write
-+ *
-+ * Return:
-+ *	On success, 0. On failure, -errno.
-+ */
-+int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
-+			      unsigned int offset, void *buf, size_t bytes);
-+
-+#else
-+
-+static inline int stm32_bsec_optee_ta_open(struct tee_context **ctx)
-+{
-+	return -EOPNOTSUPP;
-+}
-+
-+static inline void stm32_bsec_optee_ta_close(void *ctx)
-+{
-+}
-+
-+static inline int stm32_bsec_optee_ta_read(struct tee_context *ctx,
-+					   unsigned int offset, void *buf,
-+					   size_t bytes)
-+{
-+	return -EOPNOTSUPP;
-+}
-+
-+static inline int stm32_bsec_optee_ta_write(struct tee_context *ctx,
-+					    unsigned int lower,
-+					    unsigned int offset, void *buf,
-+					    size_t bytes)
-+{
-+	return -EOPNOTSUPP;
-+}
-+#endif /* CONFIG_NVMEM_STM32_BSEC_OPTEE_TA */
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -11,6 +11,9 @@
- #include <linux/module.h>
- #include <linux/nvmem-provider.h>
- #include <linux/of_device.h>
-+#include <linux/tee_drv.h>
-+
-+#include "stm32-bsec-optee-ta.h"
- 
- /* BSEC secure service access from non-secure */
- #define STM32_SMC_BSEC			0x82001003
-@@ -25,12 +28,14 @@
- struct stm32_romem_cfg {
- 	int size;
- 	u8 lower;
-+	bool ta;
- };
- 
- struct stm32_romem_priv {
- 	void __iomem *base;
- 	struct nvmem_config cfg;
- 	u8 lower;
-+	struct tee_context *ctx;
- };
- 
- static int stm32_romem_read(void *context, unsigned int offset, void *buf,
-@@ -138,12 +143,29 @@ static int stm32_bsec_write(void *contex
- 	return 0;
- }
- 
-+static int stm32_bsec_pta_read(void *context, unsigned int offset, void *buf,
-+			       size_t bytes)
-+{
-+	struct stm32_romem_priv *priv = context;
-+
-+	return stm32_bsec_optee_ta_read(priv->ctx, offset, buf, bytes);
-+}
-+
-+static int stm32_bsec_pta_write(void *context, unsigned int offset, void *buf,
-+				size_t bytes)
-+{
-+	struct stm32_romem_priv *priv = context;
-+
-+	return stm32_bsec_optee_ta_write(priv->ctx, priv->lower, offset, buf, bytes);
-+}
-+
- static int stm32_romem_probe(struct platform_device *pdev)
- {
- 	const struct stm32_romem_cfg *cfg;
- 	struct device *dev = &pdev->dev;
- 	struct stm32_romem_priv *priv;
- 	struct resource *res;
-+	int rc;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -173,15 +195,31 @@ static int stm32_romem_probe(struct plat
- 	} else {
- 		priv->cfg.size = cfg->size;
- 		priv->lower = cfg->lower;
--		priv->cfg.reg_read = stm32_bsec_read;
--		priv->cfg.reg_write = stm32_bsec_write;
-+		if (cfg->ta) {
-+			rc = stm32_bsec_optee_ta_open(&priv->ctx);
-+			/* wait for OP-TEE client driver to be up and ready */
-+			if (rc)
-+				return rc;
-+		}
-+		if (priv->ctx) {
-+			rc = devm_add_action_or_reset(dev, stm32_bsec_optee_ta_close, priv->ctx);
-+			if (rc) {
-+				dev_err(dev, "devm_add_action_or_reset() failed (%d)\n", rc);
-+				return rc;
-+			}
-+			priv->cfg.reg_read = stm32_bsec_pta_read;
-+			priv->cfg.reg_write = stm32_bsec_pta_write;
-+		} else {
-+			priv->cfg.reg_read = stm32_bsec_read;
-+			priv->cfg.reg_write = stm32_bsec_write;
-+		}
- 	}
- 
- 	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg));
- }
- 
- /*
-- * STM32MP15 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
-+ * STM32MP15/13 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits)
-  * => 96 x 32-bits data words
-  * - Lower: 1K bits, 2:1 redundancy, incremental bit programming
-  *   => 32 (x 32-bits) lower shadow registers = words 0 to 31
-@@ -191,6 +229,13 @@ static int stm32_romem_probe(struct plat
- static const struct stm32_romem_cfg stm32mp15_bsec_cfg = {
- 	.size = 384,
- 	.lower = 32,
-+	.ta = false,
-+};
-+
-+static const struct stm32_romem_cfg stm32mp13_bsec_cfg = {
-+	.size = 384,
-+	.lower = 32,
-+	.ta = true,
- };
- 
- static const struct of_device_id stm32_romem_of_match[] = {
-@@ -198,7 +243,10 @@ static const struct of_device_id stm32_r
- 		.compatible = "st,stm32mp15-bsec",
- 		.data = (void *)&stm32mp15_bsec_cfg,
- 	}, {
-+		.compatible = "st,stm32mp13-bsec",
-+		.data = (void *)&stm32mp13_bsec_cfg,
- 	},
-+	{ /* sentinel */ },
- };
- MODULE_DEVICE_TABLE(of, stm32_romem_of_match);
- 
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0008-nvmem-stm32-detect-bsec-pta-presence-for-STM32MP15x.patch b/target/linux/generic/backport-6.1/809-v6.3-0008-nvmem-stm32-detect-bsec-pta-presence-for-STM32MP15x.patch
deleted file mode 100644
index cea8e93858fc..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0008-nvmem-stm32-detect-bsec-pta-presence-for-STM32MP15x.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From df2f34ef1d924125ffaf29dfdaf7cdbd3183c321 Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Mon, 6 Feb 2023 13:43:52 +0000
-Subject: [PATCH] nvmem: stm32: detect bsec pta presence for STM32MP15x
-
-On STM32MP15x SoC, the SMC backend is optional when OP-TEE is used;
-the PTA BSEC should be used as it is done on STM32MP13x platform,
-but the BSEC SMC can be also used: it is a legacy mode in OP-TEE,
-not recommended but used in previous OP-TEE firmware.
-
-The presence of OP-TEE is dynamically detected in STM32MP15x device tree
-and the supported NVMEM backend is dynamically detected:
-- PTA with stm32_bsec_pta_find
-- SMC with stm32_bsec_check
-
-With OP-TEE but without PTA and SMC detection, the probe is deferred for
-STM32MP15x devices.
-
-On STM32MP13x platform, only the PTA is supported with cfg->ta = true
-and this detection is skipped.
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-19-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 38 +++++++++++++++++++++++++++++++++----
- 1 file changed, 34 insertions(+), 4 deletions(-)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -159,6 +159,31 @@ static int stm32_bsec_pta_write(void *co
- 	return stm32_bsec_optee_ta_write(priv->ctx, priv->lower, offset, buf, bytes);
- }
- 
-+static bool stm32_bsec_smc_check(void)
-+{
-+	u32 val;
-+	int ret;
-+
-+	/* check that the OP-TEE support the BSEC SMC (legacy mode) */
-+	ret = stm32_bsec_smc(STM32_SMC_READ_SHADOW, 0, 0, &val);
-+
-+	return !ret;
-+}
-+
-+static bool optee_presence_check(void)
-+{
-+	struct device_node *np;
-+	bool tee_detected = false;
-+
-+	/* check that the OP-TEE node is present and available. */
-+	np = of_find_compatible_node(NULL, NULL, "linaro,optee-tz");
-+	if (np && of_device_is_available(np))
-+		tee_detected = true;
-+	of_node_put(np);
-+
-+	return tee_detected;
-+}
-+
- static int stm32_romem_probe(struct platform_device *pdev)
- {
- 	const struct stm32_romem_cfg *cfg;
-@@ -195,11 +220,16 @@ static int stm32_romem_probe(struct plat
- 	} else {
- 		priv->cfg.size = cfg->size;
- 		priv->lower = cfg->lower;
--		if (cfg->ta) {
-+		if (cfg->ta || optee_presence_check()) {
- 			rc = stm32_bsec_optee_ta_open(&priv->ctx);
--			/* wait for OP-TEE client driver to be up and ready */
--			if (rc)
--				return rc;
-+			if (rc) {
-+				/* wait for OP-TEE client driver to be up and ready */
-+				if (rc == -EPROBE_DEFER)
-+					return -EPROBE_DEFER;
-+				/* BSEC PTA is required or SMC not supported */
-+				if (cfg->ta || !stm32_bsec_smc_check())
-+					return rc;
-+			}
- 		}
- 		if (priv->ctx) {
- 			rc = devm_add_action_or_reset(dev, stm32_bsec_optee_ta_close, priv->ctx);
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0009-nvmem-rave-sp-eeprm-fix-kernel-doc-bad-line-warning.patch b/target/linux/generic/backport-6.1/809-v6.3-0009-nvmem-rave-sp-eeprm-fix-kernel-doc-bad-line-warning.patch
deleted file mode 100644
index 9d6275a737bc..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0009-nvmem-rave-sp-eeprm-fix-kernel-doc-bad-line-warning.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 3e5ac22aa564026e99defc3a8e02082521a5b231 Mon Sep 17 00:00:00 2001
-From: Randy Dunlap <rdunlap@infradead.org>
-Date: Mon, 6 Feb 2023 13:43:53 +0000
-Subject: [PATCH] nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
-
-Convert an empty line to " *" to avoid a kernel-doc warning:
-
-drivers/nvmem/rave-sp-eeprom.c:48: warning: bad line:
-
-Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
-Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Cc: Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>
-Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
-Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-20-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rave-sp-eeprom.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/rave-sp-eeprom.c
-+++ b/drivers/nvmem/rave-sp-eeprom.c
-@@ -45,7 +45,7 @@ enum rave_sp_eeprom_header_size {
-  * @type:	Access type (see enum rave_sp_eeprom_access_type)
-  * @success:	Success flag (Success = 1, Failure = 0)
-  * @data:	Read data
--
-+ *
-  * Note this structure corresponds to RSP_*_EEPROM payload from RAVE
-  * SP ICD
-  */
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0010-nvmem-qcom-spmi-sdam-register-at-device-init-time.patch b/target/linux/generic/backport-6.1/809-v6.3-0010-nvmem-qcom-spmi-sdam-register-at-device-init-time.patch
deleted file mode 100644
index 1ab9e609d33c..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0010-nvmem-qcom-spmi-sdam-register-at-device-init-time.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From eb7dda20f42a9137e9ee53d5ed3b743d49338cb5 Mon Sep 17 00:00:00 2001
-From: Johan Hovold <johan+linaro@kernel.org>
-Date: Mon, 6 Feb 2023 13:43:54 +0000
-Subject: [PATCH] nvmem: qcom-spmi-sdam: register at device init time
-
-There are currently no in-tree users of the Qualcomm SDAM nvmem driver
-and there is generally no point in registering a driver that can be
-built as a module at subsys init time.
-
-Register the driver at the normal device init time instead and let
-driver core sort out the probe order.
-
-Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
-Reviewed-by: Bjorn Andersson <andersson@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-21-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qcom-spmi-sdam.c | 13 +------------
- 1 file changed, 1 insertion(+), 12 deletions(-)
-
---- a/drivers/nvmem/qcom-spmi-sdam.c
-+++ b/drivers/nvmem/qcom-spmi-sdam.c
-@@ -175,18 +175,7 @@ static struct platform_driver sdam_drive
- 	},
- 	.probe		= sdam_probe,
- };
--
--static int __init sdam_init(void)
--{
--	return platform_driver_register(&sdam_driver);
--}
--subsys_initcall(sdam_init);
--
--static void __exit sdam_exit(void)
--{
--	return platform_driver_unregister(&sdam_driver);
--}
--module_exit(sdam_exit);
-+module_platform_driver(sdam_driver);
- 
- MODULE_DESCRIPTION("QCOM SPMI SDAM driver");
- MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/backport-6.1/809-v6.3-0011-nvmem-stm32-fix-OPTEE-dependency.patch b/target/linux/generic/backport-6.1/809-v6.3-0011-nvmem-stm32-fix-OPTEE-dependency.patch
deleted file mode 100644
index dcf704c6ffbb..000000000000
--- a/target/linux/generic/backport-6.1/809-v6.3-0011-nvmem-stm32-fix-OPTEE-dependency.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 1dc7e37bb0ec1c997fac82031332a38c7610352f Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Mon, 6 Feb 2023 13:43:56 +0000
-Subject: [PATCH] nvmem: stm32: fix OPTEE dependency
-
-The stm32 nvmem driver fails to link as built-in when OPTEE
-is a loadable module:
-
-aarch64-linux-ld: drivers/nvmem/stm32-bsec-optee-ta.o: in function `stm32_bsec:
-stm32-bsec-optee-ta.c:(.text+0xc8): undefined reference to `tee_client_open_session'
-aarch64-linux-ld: drivers/nvmem/stm32-bsec-optee-ta.o: in function `stm32_bsec:
-stm32-bsec-optee-ta.c:(.text+0x1fc): undefined reference to `tee_client_open_context'
-
-Change the CONFIG_NVMEM_STM32_ROMEM definition so it can only
-be built-in if OPTEE is either built-in or disabled, and
-make NVMEM_STM32_BSEC_OPTEE_TA a hidden symbol instead.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-23-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -291,8 +291,7 @@ config NVMEM_SPRD_EFUSE
- 	  will be called nvmem-sprd-efuse.
- 
- config NVMEM_STM32_BSEC_OPTEE_TA
--	bool "STM32MP BSEC OP-TEE TA support for nvmem-stm32-romem driver"
--	depends on OPTEE
-+	def_bool NVMEM_STM32_ROMEM && OPTEE
- 	help
- 	  Say y here to enable the accesses to STM32MP SoC OTPs by the OP-TEE
- 	  trusted application STM32MP BSEC.
-@@ -303,7 +302,7 @@ config NVMEM_STM32_BSEC_OPTEE_TA
- config NVMEM_STM32_ROMEM
- 	tristate "STMicroelectronics STM32 factory-programmed memory support"
- 	depends on ARCH_STM32 || COMPILE_TEST
--	imply NVMEM_STM32_BSEC_OPTEE_TA
-+	depends on OPTEE || !OPTEE
- 	help
- 	  Say y here to enable read-only access for STMicroelectronics STM32
- 	  factory-programmed memory area.
diff --git a/target/linux/generic/backport-6.1/810-v6.3-i915-Move-list_count-to-list.h-as-list_count_nodes-f.patch b/target/linux/generic/backport-6.1/810-v6.3-i915-Move-list_count-to-list.h-as-list_count_nodes-f.patch
deleted file mode 100644
index 998e45344367..000000000000
--- a/target/linux/generic/backport-6.1/810-v6.3-i915-Move-list_count-to-list.h-as-list_count_nodes-f.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 4d70c74659d9746502b23d055dba03d1d28ec388 Mon Sep 17 00:00:00 2001
-From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Date: Wed, 30 Nov 2022 15:48:35 +0200
-Subject: [PATCH] i915: Move list_count() to list.h as list_count_nodes() for
- broader use
-
-Some of the existing users, and definitely will be new ones, want to
-count existing nodes in the list. Provide a generic API for that by
-moving code from i915 to list.h.
-
-Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
-Acked-by: Jani Nikula <jani.nikula@intel.com>
-Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Link: https://lore.kernel.org/r/20221130134838.23805-1-andriy.shevchenko@linux.intel.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 15 ++-------------
- include/linux/list.h                      | 15 +++++++++++++++
- 2 files changed, 17 insertions(+), 13 deletions(-)
-
---- a/drivers/gpu/drm/i915/gt/intel_execlists_submission.c
-+++ b/drivers/gpu/drm/i915/gt/intel_execlists_submission.c
-@@ -4153,17 +4153,6 @@ void intel_execlists_show_requests(struc
- 	spin_unlock_irqrestore(&sched_engine->lock, flags);
- }
- 
--static unsigned long list_count(struct list_head *list)
--{
--	struct list_head *pos;
--	unsigned long count = 0;
--
--	list_for_each(pos, list)
--		count++;
--
--	return count;
--}
--
- void intel_execlists_dump_active_requests(struct intel_engine_cs *engine,
- 					  struct i915_request *hung_rq,
- 					  struct drm_printer *m)
-@@ -4174,8 +4163,8 @@ void intel_execlists_dump_active_request
- 
- 	intel_engine_dump_active_requests(&engine->sched_engine->requests, hung_rq, m);
- 
--	drm_printf(m, "\tOn hold?: %lu\n",
--		   list_count(&engine->sched_engine->hold));
-+	drm_printf(m, "\tOn hold?: %zu\n",
-+		   list_count_nodes(&engine->sched_engine->hold));
- 
- 	spin_unlock_irqrestore(&engine->sched_engine->lock, flags);
- }
---- a/include/linux/list.h
-+++ b/include/linux/list.h
-@@ -656,6 +656,21 @@ static inline void list_splice_tail_init
- 	     pos = n, n = pos->prev)
- 
- /**
-+ * list_count_nodes - count nodes in the list
-+ * @head:	the head for your list.
-+ */
-+static inline size_t list_count_nodes(struct list_head *head)
-+{
-+	struct list_head *pos;
-+	size_t count = 0;
-+
-+	list_for_each(pos, head)
-+		count++;
-+
-+	return count;
-+}
-+
-+/**
-  * list_entry_is_head - test if the entry points to the head of the list
-  * @pos:	the type * to cursor
-  * @head:	the head for your list.
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0001-nvmem-xilinx-zynqmp-make-modular.patch b/target/linux/generic/backport-6.1/811-v6.4-0001-nvmem-xilinx-zynqmp-make-modular.patch
deleted file mode 100644
index 8328e87c0af7..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0001-nvmem-xilinx-zynqmp-make-modular.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From bcd1fe07def0f070eb5f31594620aaee6f81d31a Mon Sep 17 00:00:00 2001
-From: Nick Alcock <nick.alcock@oracle.com>
-Date: Tue, 4 Apr 2023 18:21:11 +0100
-Subject: [PATCH] nvmem: xilinx: zynqmp: make modular
-
-This driver has a MODULE_LICENSE but is not tristate so cannot be
-built as a module, unlike all its peers: make it modular to match.
-
-Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
-Suggested-by: Michal Simek <michal.simek@amd.com>
-Cc: Luis Chamberlain <mcgrof@kernel.org>
-Cc: linux-modules@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
-Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Cc: Michal Simek <michal.simek@xilinx.com>
-Cc: linux-arm-kernel@lists.infradead.org
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -368,7 +368,7 @@ config NVMEM_VF610_OCOTP
- 	  be called nvmem-vf610-ocotp.
- 
- config NVMEM_ZYNQMP
--	bool "Xilinx ZYNQMP SoC nvmem firmware support"
-+	tristate "Xilinx ZYNQMP SoC nvmem firmware support"
- 	depends on ARCH_ZYNQMP
- 	help
- 	  This is a driver to access hardware related data like
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0002-nvmem-core-introduce-NVMEM-layouts.patch b/target/linux/generic/backport-6.1/811-v6.4-0002-nvmem-core-introduce-NVMEM-layouts.patch
deleted file mode 100644
index 77d2af7269c2..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0002-nvmem-core-introduce-NVMEM-layouts.patch
+++ /dev/null
@@ -1,387 +0,0 @@
-From 266570f496b90dea8fda893c2cf7c28d63ae2bd9 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:21 +0100
-Subject: [PATCH] nvmem: core: introduce NVMEM layouts
-
-NVMEM layouts are used to generate NVMEM cells during runtime. Think of
-an EEPROM with a well-defined conent. For now, the content can be
-described by a device tree or a board file. But this only works if the
-offsets and lengths are static and don't change. One could also argue
-that putting the layout of the EEPROM in the device tree is the wrong
-place. Instead, the device tree should just have a specific compatible
-string.
-
-Right now there are two use cases:
- (1) The NVMEM cell needs special processing. E.g. if it only specifies
-     a base MAC address offset and you need to add an offset, or it
-     needs to parse a MAC from ASCII format or some proprietary format.
-     (Post processing of cells is added in a later commit).
- (2) u-boot environment parsing. The cells don't have a particular
-     offset but it needs parsing the content to determine the offsets
-     and length.
-
-Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-14-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- Documentation/driver-api/nvmem.rst |  15 ++++
- drivers/nvmem/Kconfig              |   4 +
- drivers/nvmem/Makefile             |   1 +
- drivers/nvmem/core.c               | 120 +++++++++++++++++++++++++++++
- drivers/nvmem/layouts/Kconfig      |   5 ++
- drivers/nvmem/layouts/Makefile     |   4 +
- include/linux/nvmem-consumer.h     |   7 ++
- include/linux/nvmem-provider.h     |  51 ++++++++++++
- 8 files changed, 207 insertions(+)
- create mode 100644 drivers/nvmem/layouts/Kconfig
- create mode 100644 drivers/nvmem/layouts/Makefile
-
---- a/Documentation/driver-api/nvmem.rst
-+++ b/Documentation/driver-api/nvmem.rst
-@@ -185,3 +185,18 @@ ex::
- =====================
- 
- See Documentation/devicetree/bindings/nvmem/nvmem.txt
-+
-+8. NVMEM layouts
-+================
-+
-+NVMEM layouts are yet another mechanism to create cells. With the device
-+tree binding it is possible to specify simple cells by using an offset
-+and a length. Sometimes, the cells doesn't have a static offset, but
-+the content is still well defined, e.g. tag-length-values. In this case,
-+the NVMEM device content has to be first parsed and the cells need to
-+be added accordingly. Layouts let you read the content of the NVMEM device
-+and let you add cells dynamically.
-+
-+Another use case for layouts is the post processing of cells. With layouts,
-+it is possible to associate a custom post processing hook to a cell. It
-+even possible to add this hook to cells not created by the layout itself.
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -21,6 +21,10 @@ config NVMEM_SYSFS
- 	 This interface is mostly used by userspace applications to
- 	 read/write directly into nvmem.
- 
-+# Layouts
-+
-+source "drivers/nvmem/layouts/Kconfig"
-+
- # Devices
- 
- config NVMEM_APPLE_EFUSES
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -5,6 +5,7 @@
- 
- obj-$(CONFIG_NVMEM)		+= nvmem_core.o
- nvmem_core-y			:= core.o
-+obj-y				+= layouts/
- 
- # Devices
- obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -40,6 +40,7 @@ struct nvmem_device {
- 	nvmem_reg_write_t	reg_write;
- 	nvmem_cell_post_process_t cell_post_process;
- 	struct gpio_desc	*wp_gpio;
-+	struct nvmem_layout	*layout;
- 	void *priv;
- };
- 
-@@ -74,6 +75,9 @@ static LIST_HEAD(nvmem_lookup_list);
- 
- static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
- 
-+static DEFINE_SPINLOCK(nvmem_layout_lock);
-+static LIST_HEAD(nvmem_layouts);
-+
- static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
- 			    void *val, size_t bytes)
- {
-@@ -727,6 +731,101 @@ static int nvmem_add_cells_from_of(struc
- 	return 0;
- }
- 
-+int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner)
-+{
-+	layout->owner = owner;
-+
-+	spin_lock(&nvmem_layout_lock);
-+	list_add(&layout->node, &nvmem_layouts);
-+	spin_unlock(&nvmem_layout_lock);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(__nvmem_layout_register);
-+
-+void nvmem_layout_unregister(struct nvmem_layout *layout)
-+{
-+	spin_lock(&nvmem_layout_lock);
-+	list_del(&layout->node);
-+	spin_unlock(&nvmem_layout_lock);
-+}
-+EXPORT_SYMBOL_GPL(nvmem_layout_unregister);
-+
-+static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem)
-+{
-+	struct device_node *layout_np, *np = nvmem->dev.of_node;
-+	struct nvmem_layout *l, *layout = NULL;
-+
-+	layout_np = of_get_child_by_name(np, "nvmem-layout");
-+	if (!layout_np)
-+		return NULL;
-+
-+	spin_lock(&nvmem_layout_lock);
-+
-+	list_for_each_entry(l, &nvmem_layouts, node) {
-+		if (of_match_node(l->of_match_table, layout_np)) {
-+			if (try_module_get(l->owner))
-+				layout = l;
-+
-+			break;
-+		}
-+	}
-+
-+	spin_unlock(&nvmem_layout_lock);
-+	of_node_put(layout_np);
-+
-+	return layout;
-+}
-+
-+static void nvmem_layout_put(struct nvmem_layout *layout)
-+{
-+	if (layout)
-+		module_put(layout->owner);
-+}
-+
-+static int nvmem_add_cells_from_layout(struct nvmem_device *nvmem)
-+{
-+	struct nvmem_layout *layout = nvmem->layout;
-+	int ret;
-+
-+	if (layout && layout->add_cells) {
-+		ret = layout->add_cells(&nvmem->dev, nvmem, layout);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+#if IS_ENABLED(CONFIG_OF)
-+/**
-+ * of_nvmem_layout_get_container() - Get OF node to layout container.
-+ *
-+ * @nvmem: nvmem device.
-+ *
-+ * Return: a node pointer with refcount incremented or NULL if no
-+ * container exists. Use of_node_put() on it when done.
-+ */
-+struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
-+{
-+	return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout");
-+}
-+EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container);
-+#endif
-+
-+const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
-+					struct nvmem_layout *layout)
-+{
-+	struct device_node __maybe_unused *layout_np;
-+	const struct of_device_id *match;
-+
-+	layout_np = of_nvmem_layout_get_container(nvmem);
-+	match = of_match_node(layout->of_match_table, layout_np);
-+
-+	return match ? match->data : NULL;
-+}
-+EXPORT_SYMBOL_GPL(nvmem_layout_get_match_data);
-+
- /**
-  * nvmem_register() - Register a nvmem device for given nvmem_config.
-  * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
-@@ -833,6 +932,12 @@ struct nvmem_device *nvmem_register(cons
- 			goto err_put_device;
- 	}
- 
-+	/*
-+	 * If the driver supplied a layout by config->layout, the module
-+	 * pointer will be NULL and nvmem_layout_put() will be a noop.
-+	 */
-+	nvmem->layout = config->layout ?: nvmem_layout_get(nvmem);
-+
- 	if (config->cells) {
- 		rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
- 		if (rval)
-@@ -853,12 +958,17 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_cells;
- 
-+	rval = nvmem_add_cells_from_layout(nvmem);
-+	if (rval)
-+		goto err_remove_cells;
-+
- 	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
- 
- 	return nvmem;
- 
- err_remove_cells:
- 	nvmem_device_remove_all_cells(nvmem);
-+	nvmem_layout_put(nvmem->layout);
- 	if (config->compat)
- 		nvmem_sysfs_remove_compat(nvmem, config);
- err_put_device:
-@@ -880,6 +990,7 @@ static void nvmem_device_release(struct
- 		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
- 
- 	nvmem_device_remove_all_cells(nvmem);
-+	nvmem_layout_put(nvmem->layout);
- 	device_unregister(&nvmem->dev);
- }
- 
-@@ -1245,6 +1356,15 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 		return ERR_PTR(-EINVAL);
- 	}
- 
-+	/* nvmem layouts produce cells within the nvmem-layout container */
-+	if (of_node_name_eq(nvmem_np, "nvmem-layout")) {
-+		nvmem_np = of_get_next_parent(nvmem_np);
-+		if (!nvmem_np) {
-+			of_node_put(cell_np);
-+			return ERR_PTR(-EINVAL);
-+		}
-+	}
-+
- 	nvmem = __nvmem_device_get(nvmem_np, device_match_of_node);
- 	of_node_put(nvmem_np);
- 	if (IS_ERR(nvmem)) {
---- /dev/null
-+++ b/drivers/nvmem/layouts/Kconfig
-@@ -0,0 +1,5 @@
-+# SPDX-License-Identifier: GPL-2.0
-+
-+menu "Layout Types"
-+
-+endmenu
---- /dev/null
-+++ b/drivers/nvmem/layouts/Makefile
-@@ -0,0 +1,4 @@
-+# SPDX-License-Identifier: GPL-2.0
-+#
-+# Makefile for nvmem layouts.
-+#
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -239,6 +239,7 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 				     const char *id);
- struct nvmem_device *of_nvmem_device_get(struct device_node *np,
- 					 const char *name);
-+struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem);
- #else
- static inline struct nvmem_cell *of_nvmem_cell_get(struct device_node *np,
- 						   const char *id)
-@@ -251,6 +252,12 @@ static inline struct nvmem_device *of_nv
- {
- 	return ERR_PTR(-EOPNOTSUPP);
- }
-+
-+static inline struct device_node *
-+of_nvmem_layout_get_container(struct nvmem_device *nvmem)
-+{
-+	return ERR_PTR(-EOPNOTSUPP);
-+}
- #endif /* CONFIG_NVMEM && CONFIG_OF */
- 
- #endif  /* ifndef _LINUX_NVMEM_CONSUMER_H */
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -88,6 +88,7 @@ struct nvmem_cell_info {
-  * @stride:	Minimum read/write access stride.
-  * @priv:	User context passed to read/write callbacks.
-  * @ignore_wp:  Write Protect pin is managed by the provider.
-+ * @layout:	Fixed layout associated with this nvmem device.
-  *
-  * Note: A default "nvmem<id>" name will be assigned to the device if
-  * no name is specified in its configuration. In such case "<id>" is
-@@ -109,6 +110,7 @@ struct nvmem_config {
- 	bool			read_only;
- 	bool			root_only;
- 	bool			ignore_wp;
-+	struct nvmem_layout	*layout;
- 	struct device_node	*of_node;
- 	bool			no_of_node;
- 	nvmem_reg_read_t	reg_read;
-@@ -142,6 +144,33 @@ struct nvmem_cell_table {
- 	struct list_head	node;
- };
- 
-+/**
-+ * struct nvmem_layout - NVMEM layout definitions
-+ *
-+ * @name:		Layout name.
-+ * @of_match_table:	Open firmware match table.
-+ * @add_cells:		Will be called if a nvmem device is found which
-+ *			has this layout. The function will add layout
-+ *			specific cells with nvmem_add_one_cell().
-+ * @owner:		Pointer to struct module.
-+ * @node:		List node.
-+ *
-+ * A nvmem device can hold a well defined structure which can just be
-+ * evaluated during runtime. For example a TLV list, or a list of "name=val"
-+ * pairs. A nvmem layout can parse the nvmem device and add appropriate
-+ * cells.
-+ */
-+struct nvmem_layout {
-+	const char *name;
-+	const struct of_device_id *of_match_table;
-+	int (*add_cells)(struct device *dev, struct nvmem_device *nvmem,
-+			 struct nvmem_layout *layout);
-+
-+	/* private */
-+	struct module *owner;
-+	struct list_head node;
-+};
-+
- #if IS_ENABLED(CONFIG_NVMEM)
- 
- struct nvmem_device *nvmem_register(const struct nvmem_config *cfg);
-@@ -156,6 +185,14 @@ void nvmem_del_cell_table(struct nvmem_c
- int nvmem_add_one_cell(struct nvmem_device *nvmem,
- 		       const struct nvmem_cell_info *info);
- 
-+int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner);
-+#define nvmem_layout_register(layout) \
-+	__nvmem_layout_register(layout, THIS_MODULE)
-+void nvmem_layout_unregister(struct nvmem_layout *layout);
-+
-+const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
-+					struct nvmem_layout *layout);
-+
- #else
- 
- static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c)
-@@ -179,5 +216,19 @@ static inline int nvmem_add_one_cell(str
- 	return -EOPNOTSUPP;
- }
- 
-+static inline int nvmem_layout_register(struct nvmem_layout *layout)
-+{
-+	return -EOPNOTSUPP;
-+}
-+
-+static inline void nvmem_layout_unregister(struct nvmem_layout *layout) {}
-+
-+static inline const void *
-+nvmem_layout_get_match_data(struct nvmem_device *nvmem,
-+			    struct nvmem_layout *layout)
-+{
-+	return NULL;
-+}
-+
- #endif /* CONFIG_NVMEM */
- #endif  /* ifndef _LINUX_NVMEM_PROVIDER_H */
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0003-nvmem-core-handle-the-absence-of-expected-layouts.patch b/target/linux/generic/backport-6.1/811-v6.4-0003-nvmem-core-handle-the-absence-of-expected-layouts.patch
deleted file mode 100644
index 40ce320b6e33..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0003-nvmem-core-handle-the-absence-of-expected-layouts.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 6468a6f45148fb5e95c86b4efebf63f9abcd2137 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:22 +0100
-Subject: [PATCH] nvmem: core: handle the absence of expected layouts
-
-Make nvmem_layout_get() return -EPROBE_DEFER while the expected layout
-is not available. This condition cannot be triggered today as nvmem
-layout drivers are initialed as part of an early init call, but soon
-these drivers will be converted into modules and be initialized with a
-standard priority, so the unavailability of the drivers might become a
-reality that must be taken care of.
-
-Let's anticipate this by telling the caller the layout might not yet be
-available. A probe deferral is requested in this case.
-
-Please note this does not affect any nvmem device not using layouts,
-because an early check against the "nvmem-layout" container presence
-will return NULL in this case.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Tested-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-15-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -754,7 +754,7 @@ EXPORT_SYMBOL_GPL(nvmem_layout_unregiste
- static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem)
- {
- 	struct device_node *layout_np, *np = nvmem->dev.of_node;
--	struct nvmem_layout *l, *layout = NULL;
-+	struct nvmem_layout *l, *layout = ERR_PTR(-EPROBE_DEFER);
- 
- 	layout_np = of_get_child_by_name(np, "nvmem-layout");
- 	if (!layout_np)
-@@ -937,6 +937,13 @@ struct nvmem_device *nvmem_register(cons
- 	 * pointer will be NULL and nvmem_layout_put() will be a noop.
- 	 */
- 	nvmem->layout = config->layout ?: nvmem_layout_get(nvmem);
-+	if (IS_ERR(nvmem->layout)) {
-+		rval = PTR_ERR(nvmem->layout);
-+		nvmem->layout = NULL;
-+
-+		if (rval == -EPROBE_DEFER)
-+			goto err_teardown_compat;
-+	}
- 
- 	if (config->cells) {
- 		rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
-@@ -969,6 +976,7 @@ struct nvmem_device *nvmem_register(cons
- err_remove_cells:
- 	nvmem_device_remove_all_cells(nvmem);
- 	nvmem_layout_put(nvmem->layout);
-+err_teardown_compat:
- 	if (config->compat)
- 		nvmem_sysfs_remove_compat(nvmem, config);
- err_put_device:
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0004-nvmem-core-request-layout-modules-loading.patch b/target/linux/generic/backport-6.1/811-v6.4-0004-nvmem-core-request-layout-modules-loading.patch
deleted file mode 100644
index 13712d76c659..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0004-nvmem-core-request-layout-modules-loading.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From b1c37bec1ccfe5ccab72bc0ddc0dfa45c43e2de2 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:23 +0100
-Subject: [PATCH] nvmem: core: request layout modules loading
-
-When a storage device like an eeprom or an mtd device probes, it
-registers an nvmem device if the nvmem subsystem has been enabled (bool
-symbol). During nvmem registration, if the device is using layouts to
-expose dynamic nvmem cells, the core will first try to get a reference
-over the layout driver callbacks. In practice there is not relationship
-that can be described between the storage driver and the nvmem
-layout. So there is no way we can enforce both drivers will be built-in
-or both will be modules. If the storage device driver is built-in but
-the layout is built as a module, instead of badly failing with an
-endless probe deferral loop, lets just make a modprobe call in case the
-driver was made available in an initramfs with
-of_device_node_request_module(), and offer a fully functional system to
-the user.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Tested-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-16-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -17,6 +17,7 @@
- #include <linux/nvmem-provider.h>
- #include <linux/gpio/consumer.h>
- #include <linux/of.h>
-+#include <linux/of_device.h>
- #include <linux/slab.h>
- 
- struct nvmem_device {
-@@ -760,6 +761,13 @@ static struct nvmem_layout *nvmem_layout
- 	if (!layout_np)
- 		return NULL;
- 
-+	/*
-+	 * In case the nvmem device was built-in while the layout was built as a
-+	 * module, we shall manually request the layout driver loading otherwise
-+	 * we'll never have any match.
-+	 */
-+	of_request_module(layout_np);
-+
- 	spin_lock(&nvmem_layout_lock);
- 
- 	list_for_each_entry(l, &nvmem_layouts, node) {
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0005-nvmem-core-add-per-cell-post-processing.patch b/target/linux/generic/backport-6.1/811-v6.4-0005-nvmem-core-add-per-cell-post-processing.patch
deleted file mode 100644
index 50f3504132b6..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0005-nvmem-core-add-per-cell-post-processing.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 345ec382cd4b736c36e01f155d08c913b225b736 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:24 +0100
-Subject: [PATCH] nvmem: core: add per-cell post processing
-
-Instead of relying on the name the consumer is using for the cell, like
-it is done for the nvmem .cell_post_process configuration parameter,
-provide a per-cell post processing hook. This can then be populated by
-the NVMEM provider (or the NVMEM layout) when adding the cell.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-17-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 17 +++++++++++++++++
- include/linux/nvmem-provider.h |  3 +++
- 2 files changed, 20 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -54,6 +54,7 @@ struct nvmem_cell_entry {
- 	int			bytes;
- 	int			bit_offset;
- 	int			nbits;
-+	nvmem_cell_post_process_t read_post_process;
- 	struct device_node	*np;
- 	struct nvmem_device	*nvmem;
- 	struct list_head	node;
-@@ -469,6 +470,7 @@ static int nvmem_cell_info_to_nvmem_cell
- 	cell->offset = info->offset;
- 	cell->bytes = info->bytes;
- 	cell->name = info->name;
-+	cell->read_post_process = info->read_post_process;
- 
- 	cell->bit_offset = info->bit_offset;
- 	cell->nbits = info->nbits;
-@@ -1562,6 +1564,13 @@ static int __nvmem_cell_read(struct nvme
- 	if (cell->bit_offset || cell->nbits)
- 		nvmem_shift_read_buffer_in_place(cell, buf);
- 
-+	if (cell->read_post_process) {
-+		rc = cell->read_post_process(nvmem->priv, id, index,
-+					     cell->offset, buf, cell->bytes);
-+		if (rc)
-+			return rc;
-+	}
-+
- 	if (nvmem->cell_post_process) {
- 		rc = nvmem->cell_post_process(nvmem->priv, id, index,
- 					      cell->offset, buf, cell->bytes);
-@@ -1670,6 +1679,14 @@ static int __nvmem_cell_entry_write(stru
- 	    (cell->bit_offset == 0 && len != cell->bytes))
- 		return -EINVAL;
- 
-+	/*
-+	 * Any cells which have a read_post_process hook are read-only because
-+	 * we cannot reverse the operation and it might affect other cells,
-+	 * too.
-+	 */
-+	if (cell->read_post_process)
-+		return -EINVAL;
-+
- 	if (cell->bit_offset || cell->nbits) {
- 		buf = nvmem_cell_prepare_write_buffer(cell, buf, len);
- 		if (IS_ERR(buf))
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -54,6 +54,8 @@ struct nvmem_keepout {
-  * @bit_offset:	Bit offset if cell is smaller than a byte.
-  * @nbits:	Number of bits.
-  * @np:		Optional device_node pointer.
-+ * @read_post_process:	Callback for optional post processing of cell data
-+ *			on reads.
-  */
- struct nvmem_cell_info {
- 	const char		*name;
-@@ -62,6 +64,7 @@ struct nvmem_cell_info {
- 	unsigned int		bit_offset;
- 	unsigned int		nbits;
- 	struct device_node	*np;
-+	nvmem_cell_post_process_t read_post_process;
- };
- 
- /**
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0006-nvmem-core-allow-to-modify-a-cell-before-adding-it.patch b/target/linux/generic/backport-6.1/811-v6.4-0006-nvmem-core-allow-to-modify-a-cell-before-adding-it.patch
deleted file mode 100644
index 1b77992a2bf6..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0006-nvmem-core-allow-to-modify-a-cell-before-adding-it.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From de12c9691501ccba41a154c223869f82be4c12fd Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:25 +0100
-Subject: [PATCH] nvmem: core: allow to modify a cell before adding it
-
-Provide a way to modify a cell before it will get added. This is useful
-to attach a custom post processing hook via a layout.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-18-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 4 ++++
- include/linux/nvmem-provider.h | 5 +++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -694,6 +694,7 @@ static int nvmem_validate_keepouts(struc
- 
- static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
- {
-+	struct nvmem_layout *layout = nvmem->layout;
- 	struct device *dev = &nvmem->dev;
- 	struct device_node *child;
- 	const __be32 *addr;
-@@ -723,6 +724,9 @@ static int nvmem_add_cells_from_of(struc
- 
- 		info.np = of_node_get(child);
- 
-+		if (layout && layout->fixup_cell_info)
-+			layout->fixup_cell_info(nvmem, layout, &info);
-+
- 		ret = nvmem_add_one_cell(nvmem, &info);
- 		kfree(info.name);
- 		if (ret) {
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -155,6 +155,8 @@ struct nvmem_cell_table {
-  * @add_cells:		Will be called if a nvmem device is found which
-  *			has this layout. The function will add layout
-  *			specific cells with nvmem_add_one_cell().
-+ * @fixup_cell_info:	Will be called before a cell is added. Can be
-+ *			used to modify the nvmem_cell_info.
-  * @owner:		Pointer to struct module.
-  * @node:		List node.
-  *
-@@ -168,6 +170,9 @@ struct nvmem_layout {
- 	const struct of_device_id *of_match_table;
- 	int (*add_cells)(struct device *dev, struct nvmem_device *nvmem,
- 			 struct nvmem_layout *layout);
-+	void (*fixup_cell_info)(struct nvmem_device *nvmem,
-+				struct nvmem_layout *layout,
-+				struct nvmem_cell_info *cell);
- 
- 	/* private */
- 	struct module *owner;
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0007-nvmem-imx-ocotp-replace-global-post-processing-with-.patch b/target/linux/generic/backport-6.1/811-v6.4-0007-nvmem-imx-ocotp-replace-global-post-processing-with-.patch
deleted file mode 100644
index 2a5fa618ea65..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0007-nvmem-imx-ocotp-replace-global-post-processing-with-.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 6c56a82d7895a213a43182a5d01a21a906a79847 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:26 +0100
-Subject: [PATCH] nvmem: imx-ocotp: replace global post processing with layouts
-
-In preparation of retiring the global post processing hook change this
-driver to use layouts. The layout will be supplied during registration
-and will be used to add the post processing hook to all added cells.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Tested-by: Michael Walle <michael@walle.cc> # on kontron-pitx-imx8m
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-19-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/imx-ocotp.c | 30 +++++++++++++++++++-----------
- 1 file changed, 19 insertions(+), 11 deletions(-)
-
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -225,18 +225,13 @@ read_end:
- static int imx_ocotp_cell_pp(void *context, const char *id, int index,
- 			     unsigned int offset, void *data, size_t bytes)
- {
--	struct ocotp_priv *priv = context;
-+	u8 *buf = data;
-+	int i;
- 
- 	/* Deal with some post processing of nvmem cell data */
--	if (id && !strcmp(id, "mac-address")) {
--		if (priv->params->reverse_mac_address) {
--			u8 *buf = data;
--			int i;
--
--			for (i = 0; i < bytes/2; i++)
--				swap(buf[i], buf[bytes - i - 1]);
--		}
--	}
-+	if (id && !strcmp(id, "mac-address"))
-+		for (i = 0; i < bytes / 2; i++)
-+			swap(buf[i], buf[bytes - i - 1]);
- 
- 	return 0;
- }
-@@ -488,7 +483,6 @@ static struct nvmem_config imx_ocotp_nvm
- 	.stride = 1,
- 	.reg_read = imx_ocotp_read,
- 	.reg_write = imx_ocotp_write,
--	.cell_post_process = imx_ocotp_cell_pp,
- };
- 
- static const struct ocotp_params imx6q_params = {
-@@ -595,6 +589,17 @@ static const struct of_device_id imx_oco
- };
- MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
- 
-+static void imx_ocotp_fixup_cell_info(struct nvmem_device *nvmem,
-+				      struct nvmem_layout *layout,
-+				      struct nvmem_cell_info *cell)
-+{
-+	cell->read_post_process = imx_ocotp_cell_pp;
-+}
-+
-+struct nvmem_layout imx_ocotp_layout = {
-+	.fixup_cell_info = imx_ocotp_fixup_cell_info,
-+};
-+
- static int imx_ocotp_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-@@ -619,6 +624,9 @@ static int imx_ocotp_probe(struct platfo
- 	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
- 	imx_ocotp_nvmem_config.dev = dev;
- 	imx_ocotp_nvmem_config.priv = priv;
-+	if (priv->params->reverse_mac_address)
-+		imx_ocotp_nvmem_config.layout = &imx_ocotp_layout;
-+
- 	priv->config = &imx_ocotp_nvmem_config;
- 
- 	clk_prepare_enable(priv->clk);
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0008-nvmem-cell-drop-global-cell_post_process.patch b/target/linux/generic/backport-6.1/811-v6.4-0008-nvmem-cell-drop-global-cell_post_process.patch
deleted file mode 100644
index e6f4be261cd8..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0008-nvmem-cell-drop-global-cell_post_process.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 011e40a166fdaa65fb9946b7cd91efec85b70dbb Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:27 +0100
-Subject: [PATCH] nvmem: cell: drop global cell_post_process
-
-There are no users anymore for the global cell_post_process callback
-anymore. New users should use proper nvmem layouts.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-20-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 9 ---------
- include/linux/nvmem-provider.h | 2 --
- 2 files changed, 11 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -39,7 +39,6 @@ struct nvmem_device {
- 	unsigned int		nkeepout;
- 	nvmem_reg_read_t	reg_read;
- 	nvmem_reg_write_t	reg_write;
--	nvmem_cell_post_process_t cell_post_process;
- 	struct gpio_desc	*wp_gpio;
- 	struct nvmem_layout	*layout;
- 	void *priv;
-@@ -902,7 +901,6 @@ struct nvmem_device *nvmem_register(cons
- 	nvmem->type = config->type;
- 	nvmem->reg_read = config->reg_read;
- 	nvmem->reg_write = config->reg_write;
--	nvmem->cell_post_process = config->cell_post_process;
- 	nvmem->keepout = config->keepout;
- 	nvmem->nkeepout = config->nkeepout;
- 	if (config->of_node)
-@@ -1574,13 +1572,6 @@ static int __nvmem_cell_read(struct nvme
- 		if (rc)
- 			return rc;
- 	}
--
--	if (nvmem->cell_post_process) {
--		rc = nvmem->cell_post_process(nvmem->priv, id, index,
--					      cell->offset, buf, cell->bytes);
--		if (rc)
--			return rc;
--	}
- 
- 	if (len)
- 		*len = cell->bytes;
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -85,7 +85,6 @@ struct nvmem_cell_info {
-  * @no_of_node:	Device should not use the parent's of_node even if it's !NULL.
-  * @reg_read:	Callback to read data.
-  * @reg_write:	Callback to write data.
-- * @cell_post_process:	Callback for vendor specific post processing of cell data
-  * @size:	Device size.
-  * @word_size:	Minimum read/write access granularity.
-  * @stride:	Minimum read/write access stride.
-@@ -118,7 +117,6 @@ struct nvmem_config {
- 	bool			no_of_node;
- 	nvmem_reg_read_t	reg_read;
- 	nvmem_reg_write_t	reg_write;
--	nvmem_cell_post_process_t cell_post_process;
- 	int	size;
- 	int	word_size;
- 	int	stride;
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0009-nvmem-core-provide-own-priv-pointer-in-post-process-.patch b/target/linux/generic/backport-6.1/811-v6.4-0009-nvmem-core-provide-own-priv-pointer-in-post-process-.patch
deleted file mode 100644
index b39626f6e78a..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0009-nvmem-core-provide-own-priv-pointer-in-post-process-.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 8a134fd9f9323f4c39ec27055b3d3723cfb5c1e9 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:28 +0100
-Subject: [PATCH] nvmem: core: provide own priv pointer in post process
- callback
-
-It doesn't make any more sense to have a opaque pointer set up by the
-nvmem device. Usually, the layout isn't associated with a particular
-nvmem device. Instead, let the caller who set the post process callback
-provide the priv pointer.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-21-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 4 +++-
- include/linux/nvmem-provider.h | 5 ++++-
- 2 files changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -54,6 +54,7 @@ struct nvmem_cell_entry {
- 	int			bit_offset;
- 	int			nbits;
- 	nvmem_cell_post_process_t read_post_process;
-+	void			*priv;
- 	struct device_node	*np;
- 	struct nvmem_device	*nvmem;
- 	struct list_head	node;
-@@ -470,6 +471,7 @@ static int nvmem_cell_info_to_nvmem_cell
- 	cell->bytes = info->bytes;
- 	cell->name = info->name;
- 	cell->read_post_process = info->read_post_process;
-+	cell->priv = info->priv;
- 
- 	cell->bit_offset = info->bit_offset;
- 	cell->nbits = info->nbits;
-@@ -1567,7 +1569,7 @@ static int __nvmem_cell_read(struct nvme
- 		nvmem_shift_read_buffer_in_place(cell, buf);
- 
- 	if (cell->read_post_process) {
--		rc = cell->read_post_process(nvmem->priv, id, index,
-+		rc = cell->read_post_process(cell->priv, id, index,
- 					     cell->offset, buf, cell->bytes);
- 		if (rc)
- 			return rc;
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -20,7 +20,8 @@ typedef int (*nvmem_reg_write_t)(void *p
- 				 void *val, size_t bytes);
- /* used for vendor specific post processing of cell data */
- typedef int (*nvmem_cell_post_process_t)(void *priv, const char *id, int index,
--					 unsigned int offset, void *buf, size_t bytes);
-+					 unsigned int offset, void *buf,
-+					 size_t bytes);
- 
- enum nvmem_type {
- 	NVMEM_TYPE_UNKNOWN = 0,
-@@ -56,6 +57,7 @@ struct nvmem_keepout {
-  * @np:		Optional device_node pointer.
-  * @read_post_process:	Callback for optional post processing of cell data
-  *			on reads.
-+ * @priv:	Opaque data passed to the read_post_process hook.
-  */
- struct nvmem_cell_info {
- 	const char		*name;
-@@ -65,6 +67,7 @@ struct nvmem_cell_info {
- 	unsigned int		nbits;
- 	struct device_node	*np;
- 	nvmem_cell_post_process_t read_post_process;
-+	void			*priv;
- };
- 
- /**
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0010-nvmem-layouts-sl28vpd-Add-new-layout-driver.patch b/target/linux/generic/backport-6.1/811-v6.4-0010-nvmem-layouts-sl28vpd-Add-new-layout-driver.patch
deleted file mode 100644
index 7d97658b60e2..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0010-nvmem-layouts-sl28vpd-Add-new-layout-driver.patch
+++ /dev/null
@@ -1,215 +0,0 @@
-From d9fae023fe86069750092fc1c2f3a73e2fb18512 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Tue, 4 Apr 2023 18:21:29 +0100
-Subject: [PATCH] nvmem: layouts: sl28vpd: Add new layout driver
-
-This layout applies to the VPD of the Kontron sl28 boards. The VPD only
-contains a base MAC address. Therefore, we have to add an individual
-offset to it. This is done by taking the second argument of the nvmem
-phandle into account. Also this let us checking the VPD version and the
-checksum.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-22-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/Kconfig   |   9 ++
- drivers/nvmem/layouts/Makefile  |   2 +
- drivers/nvmem/layouts/sl28vpd.c | 165 ++++++++++++++++++++++++++++++++
- 3 files changed, 176 insertions(+)
- create mode 100644 drivers/nvmem/layouts/sl28vpd.c
-
---- a/drivers/nvmem/layouts/Kconfig
-+++ b/drivers/nvmem/layouts/Kconfig
-@@ -2,4 +2,13 @@
- 
- menu "Layout Types"
- 
-+config NVMEM_LAYOUT_SL28_VPD
-+	tristate "Kontron sl28 VPD layout support"
-+	select CRC8
-+	help
-+	  Say Y here if you want to support the VPD layout of the Kontron
-+	  SMARC-sAL28 boards.
-+
-+	  If unsure, say N.
-+
- endmenu
---- a/drivers/nvmem/layouts/Makefile
-+++ b/drivers/nvmem/layouts/Makefile
-@@ -2,3 +2,5 @@
- #
- # Makefile for nvmem layouts.
- #
-+
-+obj-$(CONFIG_NVMEM_LAYOUT_SL28_VPD) += sl28vpd.o
---- /dev/null
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -0,0 +1,165 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#include <linux/crc8.h>
-+#include <linux/etherdevice.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of.h>
-+#include <uapi/linux/if_ether.h>
-+
-+#define SL28VPD_MAGIC 'V'
-+
-+struct sl28vpd_header {
-+	u8 magic;
-+	u8 version;
-+} __packed;
-+
-+struct sl28vpd_v1 {
-+	struct sl28vpd_header header;
-+	char serial_number[15];
-+	u8 base_mac_address[ETH_ALEN];
-+	u8 crc8;
-+} __packed;
-+
-+static int sl28vpd_mac_address_pp(void *priv, const char *id, int index,
-+				  unsigned int offset, void *buf,
-+				  size_t bytes)
-+{
-+	if (bytes != ETH_ALEN)
-+		return -EINVAL;
-+
-+	if (index < 0)
-+		return -EINVAL;
-+
-+	if (!is_valid_ether_addr(buf))
-+		return -EINVAL;
-+
-+	eth_addr_add(buf, index);
-+
-+	return 0;
-+}
-+
-+static const struct nvmem_cell_info sl28vpd_v1_entries[] = {
-+	{
-+		.name = "serial-number",
-+		.offset = offsetof(struct sl28vpd_v1, serial_number),
-+		.bytes = sizeof_field(struct sl28vpd_v1, serial_number),
-+	},
-+	{
-+		.name = "base-mac-address",
-+		.offset = offsetof(struct sl28vpd_v1, base_mac_address),
-+		.bytes = sizeof_field(struct sl28vpd_v1, base_mac_address),
-+		.read_post_process = sl28vpd_mac_address_pp,
-+	},
-+};
-+
-+static int sl28vpd_v1_check_crc(struct device *dev, struct nvmem_device *nvmem)
-+{
-+	struct sl28vpd_v1 data_v1;
-+	u8 table[CRC8_TABLE_SIZE];
-+	int ret;
-+	u8 crc;
-+
-+	crc8_populate_msb(table, 0x07);
-+
-+	ret = nvmem_device_read(nvmem, 0, sizeof(data_v1), &data_v1);
-+	if (ret < 0)
-+		return ret;
-+	else if (ret != sizeof(data_v1))
-+		return -EIO;
-+
-+	crc = crc8(table, (void *)&data_v1, sizeof(data_v1) - 1, 0);
-+
-+	if (crc != data_v1.crc8) {
-+		dev_err(dev,
-+			"Checksum is invalid (got %02x, expected %02x).\n",
-+			crc, data_v1.crc8);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static int sl28vpd_add_cells(struct device *dev, struct nvmem_device *nvmem,
-+			     struct nvmem_layout *layout)
-+{
-+	const struct nvmem_cell_info *pinfo;
-+	struct nvmem_cell_info info = {0};
-+	struct device_node *layout_np;
-+	struct sl28vpd_header hdr;
-+	int ret, i;
-+
-+	/* check header */
-+	ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr);
-+	if (ret < 0)
-+		return ret;
-+	else if (ret != sizeof(hdr))
-+		return -EIO;
-+
-+	if (hdr.magic != SL28VPD_MAGIC) {
-+		dev_err(dev, "Invalid magic value (%02x)\n", hdr.magic);
-+		return -EINVAL;
-+	}
-+
-+	if (hdr.version != 1) {
-+		dev_err(dev, "Version %d is unsupported.\n", hdr.version);
-+		return -EINVAL;
-+	}
-+
-+	ret = sl28vpd_v1_check_crc(dev, nvmem);
-+	if (ret)
-+		return ret;
-+
-+	layout_np = of_nvmem_layout_get_container(nvmem);
-+	if (!layout_np)
-+		return -ENOENT;
-+
-+	for (i = 0; i < ARRAY_SIZE(sl28vpd_v1_entries); i++) {
-+		pinfo = &sl28vpd_v1_entries[i];
-+
-+		info.name = pinfo->name;
-+		info.offset = pinfo->offset;
-+		info.bytes = pinfo->bytes;
-+		info.read_post_process = pinfo->read_post_process;
-+		info.np = of_get_child_by_name(layout_np, pinfo->name);
-+
-+		ret = nvmem_add_one_cell(nvmem, &info);
-+		if (ret) {
-+			of_node_put(layout_np);
-+			return ret;
-+		}
-+	}
-+
-+	of_node_put(layout_np);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id sl28vpd_of_match_table[] = {
-+	{ .compatible = "kontron,sl28-vpd" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, sl28vpd_of_match_table);
-+
-+struct nvmem_layout sl28vpd_layout = {
-+	.name = "sl28-vpd",
-+	.of_match_table = sl28vpd_of_match_table,
-+	.add_cells = sl28vpd_add_cells,
-+};
-+
-+static int __init sl28vpd_init(void)
-+{
-+	return nvmem_layout_register(&sl28vpd_layout);
-+}
-+
-+static void __exit sl28vpd_exit(void)
-+{
-+	nvmem_layout_unregister(&sl28vpd_layout);
-+}
-+
-+module_init(sl28vpd_init);
-+module_exit(sl28vpd_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
-+MODULE_DESCRIPTION("NVMEM layout driver for the VPD of Kontron sl28 boards");
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0011-nvmem-layouts-onie-tlv-Add-new-layout-driver.patch b/target/linux/generic/backport-6.1/811-v6.4-0011-nvmem-layouts-onie-tlv-Add-new-layout-driver.patch
deleted file mode 100644
index ca8b4bc06914..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0011-nvmem-layouts-onie-tlv-Add-new-layout-driver.patch
+++ /dev/null
@@ -1,306 +0,0 @@
-From d3c0d12f6474216bf386101e2449cc73e5c5b61d Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:31 +0100
-Subject: [PATCH] nvmem: layouts: onie-tlv: Add new layout driver
-
-This layout applies on top of any non volatile storage device containing
-an ONIE table factory flashed. This table follows the tlv
-(type-length-value) organization described in the link below. We cannot
-afford using regular parsers because the content of these tables is
-manufacturer specific and must be dynamically discovered.
-
-Link: https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-24-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/Kconfig    |   9 ++
- drivers/nvmem/layouts/Makefile   |   1 +
- drivers/nvmem/layouts/onie-tlv.c | 257 +++++++++++++++++++++++++++++++
- 3 files changed, 267 insertions(+)
- create mode 100644 drivers/nvmem/layouts/onie-tlv.c
-
---- a/drivers/nvmem/layouts/Kconfig
-+++ b/drivers/nvmem/layouts/Kconfig
-@@ -11,4 +11,13 @@ config NVMEM_LAYOUT_SL28_VPD
- 
- 	  If unsure, say N.
- 
-+config NVMEM_LAYOUT_ONIE_TLV
-+	tristate "ONIE tlv support"
-+	select CRC32
-+	help
-+	  Say Y here if you want to support the Open Compute Project ONIE
-+	  Type-Length-Value standard table.
-+
-+	  If unsure, say N.
-+
- endmenu
---- a/drivers/nvmem/layouts/Makefile
-+++ b/drivers/nvmem/layouts/Makefile
-@@ -4,3 +4,4 @@
- #
- 
- obj-$(CONFIG_NVMEM_LAYOUT_SL28_VPD) += sl28vpd.o
-+obj-$(CONFIG_NVMEM_LAYOUT_ONIE_TLV) += onie-tlv.o
---- /dev/null
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -0,0 +1,257 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * ONIE tlv NVMEM cells provider
-+ *
-+ * Copyright (C) 2022 Open Compute Group ONIE
-+ * Author: Miquel Raynal <miquel.raynal@bootlin.com>
-+ * Based on the nvmem driver written by: Vadym Kochan <vadym.kochan@plvision.eu>
-+ * Inspired by the first layout written by: Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/crc32.h>
-+#include <linux/etherdevice.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of.h>
-+
-+#define ONIE_TLV_MAX_LEN 2048
-+#define ONIE_TLV_CRC_FIELD_SZ 6
-+#define ONIE_TLV_CRC_SZ 4
-+#define ONIE_TLV_HDR_ID	"TlvInfo"
-+
-+struct onie_tlv_hdr {
-+	u8 id[8];
-+	u8 version;
-+	__be16 data_len;
-+} __packed;
-+
-+struct onie_tlv {
-+	u8 type;
-+	u8 len;
-+} __packed;
-+
-+static const char *onie_tlv_cell_name(u8 type)
-+{
-+	switch (type) {
-+	case 0x21:
-+		return "product-name";
-+	case 0x22:
-+		return "part-number";
-+	case 0x23:
-+		return "serial-number";
-+	case 0x24:
-+		return "mac-address";
-+	case 0x25:
-+		return "manufacture-date";
-+	case 0x26:
-+		return "device-version";
-+	case 0x27:
-+		return "label-revision";
-+	case 0x28:
-+		return "platform-name";
-+	case 0x29:
-+		return "onie-version";
-+	case 0x2A:
-+		return "num-macs";
-+	case 0x2B:
-+		return "manufacturer";
-+	case 0x2C:
-+		return "country-code";
-+	case 0x2D:
-+		return "vendor";
-+	case 0x2E:
-+		return "diag-version";
-+	case 0x2F:
-+		return "service-tag";
-+	case 0xFD:
-+		return "vendor-extension";
-+	case 0xFE:
-+		return "crc32";
-+	default:
-+		break;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int onie_tlv_mac_read_cb(void *priv, const char *id, int index,
-+				unsigned int offset, void *buf,
-+				size_t bytes)
-+{
-+	eth_addr_add(buf, index);
-+
-+	return 0;
-+}
-+
-+static nvmem_cell_post_process_t onie_tlv_read_cb(u8 type, u8 *buf)
-+{
-+	switch (type) {
-+	case 0x24:
-+		return &onie_tlv_mac_read_cb;
-+	default:
-+		break;
-+	}
-+
-+	return NULL;
-+}
-+
-+static int onie_tlv_add_cells(struct device *dev, struct nvmem_device *nvmem,
-+			      size_t data_len, u8 *data)
-+{
-+	struct nvmem_cell_info cell = {};
-+	struct device_node *layout;
-+	struct onie_tlv tlv;
-+	unsigned int hdr_len = sizeof(struct onie_tlv_hdr);
-+	unsigned int offset = 0;
-+	int ret;
-+
-+	layout = of_nvmem_layout_get_container(nvmem);
-+	if (!layout)
-+		return -ENOENT;
-+
-+	while (offset < data_len) {
-+		memcpy(&tlv, data + offset, sizeof(tlv));
-+		if (offset + tlv.len >= data_len) {
-+			dev_err(dev, "Out of bounds field (0x%x bytes at 0x%x)\n",
-+				tlv.len, hdr_len + offset);
-+			break;
-+		}
-+
-+		cell.name = onie_tlv_cell_name(tlv.type);
-+		if (!cell.name)
-+			continue;
-+
-+		cell.offset = hdr_len + offset + sizeof(tlv.type) + sizeof(tlv.len);
-+		cell.bytes = tlv.len;
-+		cell.np = of_get_child_by_name(layout, cell.name);
-+		cell.read_post_process = onie_tlv_read_cb(tlv.type, data + offset + sizeof(tlv));
-+
-+		ret = nvmem_add_one_cell(nvmem, &cell);
-+		if (ret) {
-+			of_node_put(layout);
-+			return ret;
-+		}
-+
-+		offset += sizeof(tlv) + tlv.len;
-+	}
-+
-+	of_node_put(layout);
-+
-+	return 0;
-+}
-+
-+static bool onie_tlv_hdr_is_valid(struct device *dev, struct onie_tlv_hdr *hdr)
-+{
-+	if (memcmp(hdr->id, ONIE_TLV_HDR_ID, sizeof(hdr->id))) {
-+		dev_err(dev, "Invalid header\n");
-+		return false;
-+	}
-+
-+	if (hdr->version != 0x1) {
-+		dev_err(dev, "Invalid version number\n");
-+		return false;
-+	}
-+
-+	return true;
-+}
-+
-+static bool onie_tlv_crc_is_valid(struct device *dev, size_t table_len, u8 *table)
-+{
-+	struct onie_tlv crc_hdr;
-+	u32 read_crc, calc_crc;
-+	__be32 crc_be;
-+
-+	memcpy(&crc_hdr, table + table_len - ONIE_TLV_CRC_FIELD_SZ, sizeof(crc_hdr));
-+	if (crc_hdr.type != 0xfe || crc_hdr.len != ONIE_TLV_CRC_SZ) {
-+		dev_err(dev, "Invalid CRC field\n");
-+		return false;
-+	}
-+
-+	/* The table contains a JAMCRC, which is XOR'ed compared to the original
-+	 * CRC32 implementation as known in the Ethernet world.
-+	 */
-+	memcpy(&crc_be, table + table_len - ONIE_TLV_CRC_SZ, ONIE_TLV_CRC_SZ);
-+	read_crc = be32_to_cpu(crc_be);
-+	calc_crc = crc32(~0, table, table_len - ONIE_TLV_CRC_SZ) ^ 0xFFFFFFFF;
-+	if (read_crc != calc_crc) {
-+		dev_err(dev, "Invalid CRC read: 0x%08x, expected: 0x%08x\n",
-+			read_crc, calc_crc);
-+		return false;
-+	}
-+
-+	return true;
-+}
-+
-+static int onie_tlv_parse_table(struct device *dev, struct nvmem_device *nvmem,
-+				struct nvmem_layout *layout)
-+{
-+	struct onie_tlv_hdr hdr;
-+	size_t table_len, data_len, hdr_len;
-+	u8 *table, *data;
-+	int ret;
-+
-+	ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (!onie_tlv_hdr_is_valid(dev, &hdr)) {
-+		dev_err(dev, "Invalid ONIE TLV header\n");
-+		return -EINVAL;
-+	}
-+
-+	hdr_len = sizeof(hdr.id) + sizeof(hdr.version) + sizeof(hdr.data_len);
-+	data_len = be16_to_cpu(hdr.data_len);
-+	table_len = hdr_len + data_len;
-+	if (table_len > ONIE_TLV_MAX_LEN) {
-+		dev_err(dev, "Invalid ONIE TLV data length\n");
-+		return -EINVAL;
-+	}
-+
-+	table = devm_kmalloc(dev, table_len, GFP_KERNEL);
-+	if (!table)
-+		return -ENOMEM;
-+
-+	ret = nvmem_device_read(nvmem, 0, table_len, table);
-+	if (ret != table_len)
-+		return ret;
-+
-+	if (!onie_tlv_crc_is_valid(dev, table_len, table))
-+		return -EINVAL;
-+
-+	data = table + hdr_len;
-+	ret = onie_tlv_add_cells(dev, nvmem, data_len, data);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id onie_tlv_of_match_table[] = {
-+	{ .compatible = "onie,tlv-layout", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, onie_tlv_of_match_table);
-+
-+static struct nvmem_layout onie_tlv_layout = {
-+	.name = "ONIE tlv layout",
-+	.of_match_table = onie_tlv_of_match_table,
-+	.add_cells = onie_tlv_parse_table,
-+};
-+
-+static int __init onie_tlv_init(void)
-+{
-+	return nvmem_layout_register(&onie_tlv_layout);
-+}
-+
-+static void __exit onie_tlv_exit(void)
-+{
-+	nvmem_layout_unregister(&onie_tlv_layout);
-+}
-+
-+module_init(onie_tlv_init);
-+module_exit(onie_tlv_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
-+MODULE_DESCRIPTION("NVMEM layout driver for Onie TLV table parsing");
-+MODULE_ALIAS("NVMEM layout driver for Onie TLV table parsing");
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0012-nvmem-stm32-romem-mark-OF-related-data-as-maybe-unus.patch b/target/linux/generic/backport-6.1/811-v6.4-0012-nvmem-stm32-romem-mark-OF-related-data-as-maybe-unus.patch
deleted file mode 100644
index 94a0911d73cc..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0012-nvmem-stm32-romem-mark-OF-related-data-as-maybe-unus.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From a4fb434ef96ace5af758ca2c52c3a3f8f3abc87c Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 4 Apr 2023 18:21:34 +0100
-Subject: [PATCH] nvmem: stm32-romem: mark OF related data as maybe unused
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The driver can be compile tested with !CONFIG_OF making certain data
-unused:
-
-  drivers/nvmem/stm32-romem.c:271:34: error: ‘stm32_romem_of_match’ defined but not used [-Werror=unused-const-variable=]
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-27-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -268,7 +268,7 @@ static const struct stm32_romem_cfg stm3
- 	.ta = true,
- };
- 
--static const struct of_device_id stm32_romem_of_match[] = {
-+static const struct of_device_id stm32_romem_of_match[] __maybe_unused = {
- 	{ .compatible = "st,stm32f4-otp", }, {
- 		.compatible = "st,stm32mp15-bsec",
- 		.data = (void *)&stm32mp15_bsec_cfg,
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0013-nvmem-mtk-efuse-Support-postprocessing-for-GPU-speed.patch b/target/linux/generic/backport-6.1/811-v6.4-0013-nvmem-mtk-efuse-Support-postprocessing-for-GPU-speed.patch
deleted file mode 100644
index abda402bddb0..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0013-nvmem-mtk-efuse-Support-postprocessing-for-GPU-speed.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From de6e05097f7db066afb0ad4c88b730949f7b7749 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Tue, 4 Apr 2023 18:21:35 +0100
-Subject: [PATCH] nvmem: mtk-efuse: Support postprocessing for GPU speed
- binning data
-
-On some MediaTek SoCs GPU speed binning data is available for read
-in the SoC's eFuse array but it has a format that is incompatible
-with what the OPP API expects, as we read a number from 0 to 7 but
-opp-supported-hw is expecting a bitmask to enable an OPP entry:
-being what we read limited to 0-7, it's straightforward to simply
-convert the value to BIT(value) as a post-processing action.
-
-So, introduce post-processing support and enable it by evaluating
-the newly introduced platform data's `uses_post_processing` member,
-currently enabled only for MT8186.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-28-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/mtk-efuse.c | 53 +++++++++++++++++++++++++++++++++++++--
- 1 file changed, 51 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/mtk-efuse.c
-+++ b/drivers/nvmem/mtk-efuse.c
-@@ -10,6 +10,11 @@
- #include <linux/io.h>
- #include <linux/nvmem-provider.h>
- #include <linux/platform_device.h>
-+#include <linux/property.h>
-+
-+struct mtk_efuse_pdata {
-+	bool uses_post_processing;
-+};
- 
- struct mtk_efuse_priv {
- 	void __iomem *base;
-@@ -29,6 +34,37 @@ static int mtk_reg_read(void *context,
- 	return 0;
- }
- 
-+static int mtk_efuse_gpu_speedbin_pp(void *context, const char *id, int index,
-+				     unsigned int offset, void *data, size_t bytes)
-+{
-+	u8 *val = data;
-+
-+	if (val[0] < 8)
-+		val[0] = BIT(val[0]);
-+
-+	return 0;
-+}
-+
-+static void mtk_efuse_fixup_cell_info(struct nvmem_device *nvmem,
-+				      struct nvmem_layout *layout,
-+				      struct nvmem_cell_info *cell)
-+{
-+	size_t sz = strlen(cell->name);
-+
-+	/*
-+	 * On some SoCs, the GPU speedbin is not read as bitmask but as
-+	 * a number with range [0-7] (max 3 bits): post process to use
-+	 * it in OPP tables to describe supported-hw.
-+	 */
-+	if (cell->nbits <= 3 &&
-+	    strncmp(cell->name, "gpu-speedbin", min(sz, strlen("gpu-speedbin"))) == 0)
-+		cell->read_post_process = mtk_efuse_gpu_speedbin_pp;
-+}
-+
-+static struct nvmem_layout mtk_efuse_layout = {
-+	.fixup_cell_info = mtk_efuse_fixup_cell_info,
-+};
-+
- static int mtk_efuse_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-@@ -36,6 +72,7 @@ static int mtk_efuse_probe(struct platfo
- 	struct nvmem_device *nvmem;
- 	struct nvmem_config econfig = {};
- 	struct mtk_efuse_priv *priv;
-+	const struct mtk_efuse_pdata *pdata;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -45,20 +82,32 @@ static int mtk_efuse_probe(struct platfo
- 	if (IS_ERR(priv->base))
- 		return PTR_ERR(priv->base);
- 
-+	pdata = device_get_match_data(dev);
- 	econfig.stride = 1;
- 	econfig.word_size = 1;
- 	econfig.reg_read = mtk_reg_read;
- 	econfig.size = resource_size(res);
- 	econfig.priv = priv;
- 	econfig.dev = dev;
-+	if (pdata->uses_post_processing)
-+		econfig.layout = &mtk_efuse_layout;
- 	nvmem = devm_nvmem_register(dev, &econfig);
- 
- 	return PTR_ERR_OR_ZERO(nvmem);
- }
- 
-+static const struct mtk_efuse_pdata mtk_mt8186_efuse_pdata = {
-+	.uses_post_processing = true,
-+};
-+
-+static const struct mtk_efuse_pdata mtk_efuse_pdata = {
-+	.uses_post_processing = false,
-+};
-+
- static const struct of_device_id mtk_efuse_of_match[] = {
--	{ .compatible = "mediatek,mt8173-efuse",},
--	{ .compatible = "mediatek,efuse",},
-+	{ .compatible = "mediatek,mt8173-efuse", .data = &mtk_efuse_pdata },
-+	{ .compatible = "mediatek,mt8186-efuse", .data = &mtk_mt8186_efuse_pdata },
-+	{ .compatible = "mediatek,efuse", .data = &mtk_efuse_pdata },
- 	{/* sentinel */},
- };
- MODULE_DEVICE_TABLE(of, mtk_efuse_of_match);
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0014-nvmem-bcm-ocotp-Use-devm_platform_ioremap_resource.patch b/target/linux/generic/backport-6.1/811-v6.4-0014-nvmem-bcm-ocotp-Use-devm_platform_ioremap_resource.patch
deleted file mode 100644
index 200eb1928f8c..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0014-nvmem-bcm-ocotp-Use-devm_platform_ioremap_resource.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 1dc552fa33cf98af3e784dbc0500da93cae3b24a Mon Sep 17 00:00:00 2001
-From: Yang Li <yang.lee@linux.alibaba.com>
-Date: Tue, 4 Apr 2023 18:21:38 +0100
-Subject: [PATCH] nvmem: bcm-ocotp: Use devm_platform_ioremap_resource()
-
-According to commit 7945f929f1a7 ("drivers: provide
-devm_platform_ioremap_resource()"), convert platform_get_resource(),
-devm_ioremap_resource() to a single call to use
-devm_platform_ioremap_resource(), as this is exactly what this function
-does.
-
-Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-31-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/bcm-ocotp.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/nvmem/bcm-ocotp.c
-+++ b/drivers/nvmem/bcm-ocotp.c
-@@ -244,7 +244,6 @@ MODULE_DEVICE_TABLE(acpi, bcm_otpc_acpi_
- static int bcm_otpc_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
--	struct resource *res;
- 	struct otpc_priv *priv;
- 	struct nvmem_device *nvmem;
- 	int err;
-@@ -259,8 +258,7 @@ static int bcm_otpc_probe(struct platfor
- 		return -ENODEV;
- 
- 	/* Get OTP base address register. */
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	priv->base = devm_ioremap_resource(dev, res);
-+	priv->base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(priv->base)) {
- 		dev_err(dev, "unable to map I/O memory\n");
- 		return PTR_ERR(priv->base);
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0015-nvmem-nintendo-otp-Use-devm_platform_ioremap_resourc.patch b/target/linux/generic/backport-6.1/811-v6.4-0015-nvmem-nintendo-otp-Use-devm_platform_ioremap_resourc.patch
deleted file mode 100644
index 890dacd08dbe..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0015-nvmem-nintendo-otp-Use-devm_platform_ioremap_resourc.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 649409990d2e93fac657be7c6960c28a2c601d65 Mon Sep 17 00:00:00 2001
-From: Yang Li <yang.lee@linux.alibaba.com>
-Date: Tue, 4 Apr 2023 18:21:39 +0100
-Subject: [PATCH] nvmem: nintendo-otp: Use devm_platform_ioremap_resource()
-
-According to commit 7945f929f1a7 ("drivers: provide
-devm_platform_ioremap_resource()"), convert platform_get_resource(),
-devm_ioremap_resource() to a single call to use
-devm_platform_ioremap_resource(), as this is exactly what this function
-does.
-
-Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-32-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/nintendo-otp.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/nvmem/nintendo-otp.c
-+++ b/drivers/nvmem/nintendo-otp.c
-@@ -76,7 +76,6 @@ static int nintendo_otp_probe(struct pla
- 	struct device *dev = &pdev->dev;
- 	const struct of_device_id *of_id =
- 		of_match_device(nintendo_otp_of_table, dev);
--	struct resource *res;
- 	struct nvmem_device *nvmem;
- 	struct nintendo_otp_priv *priv;
- 
-@@ -92,8 +91,7 @@ static int nintendo_otp_probe(struct pla
- 	if (!priv)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	priv->regs = devm_ioremap_resource(dev, res);
-+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(priv->regs))
- 		return PTR_ERR(priv->regs);
- 
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0016-nvmem-vf610-ocotp-Use-devm_platform_get_and_ioremap_.patch b/target/linux/generic/backport-6.1/811-v6.4-0016-nvmem-vf610-ocotp-Use-devm_platform_get_and_ioremap_.patch
deleted file mode 100644
index 3f5d3c1ad4c1..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0016-nvmem-vf610-ocotp-Use-devm_platform_get_and_ioremap_.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From c2367aa60d5e34d48582362c6de34b4131d92be7 Mon Sep 17 00:00:00 2001
-From: Yang Li <yang.lee@linux.alibaba.com>
-Date: Tue, 4 Apr 2023 18:21:40 +0100
-Subject: [PATCH] nvmem: vf610-ocotp: Use
- devm_platform_get_and_ioremap_resource()
-
-According to commit 890cc39a8799 ("drivers: provide
-devm_platform_get_and_ioremap_resource()"), convert
-platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-33-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/vf610-ocotp.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/nvmem/vf610-ocotp.c
-+++ b/drivers/nvmem/vf610-ocotp.c
-@@ -219,8 +219,7 @@ static int vf610_ocotp_probe(struct plat
- 	if (!ocotp_dev)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	ocotp_dev->base = devm_ioremap_resource(dev, res);
-+	ocotp_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- 	if (IS_ERR(ocotp_dev->base))
- 		return PTR_ERR(ocotp_dev->base);
- 
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0017-nvmem-core-support-specifying-both-cell-raw-data-pos.patch b/target/linux/generic/backport-6.1/811-v6.4-0017-nvmem-core-support-specifying-both-cell-raw-data-pos.patch
deleted file mode 100644
index a1ebd53d074b..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0017-nvmem-core-support-specifying-both-cell-raw-data-pos.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 55d4980ce55b6bb4be66877de4dbec513911b988 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 4 Apr 2023 18:21:42 +0100
-Subject: [PATCH] nvmem: core: support specifying both: cell raw data & post
- read lengths
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Callback .read_post_process() is designed to modify raw cell content
-before providing it to the consumer. So far we were dealing with
-modifications that didn't affect cell size (length). In some cases
-however cell content needs to be reformatted and resized.
-
-It's required e.g. to provide properly formatted MAC address in case
-it's stored in a non-binary format (e.g. using ASCII).
-
-There were few discussions how to optimally handle that. Following
-possible solutions were considered:
-1. Allow .read_post_process() to realloc (resize) content buffer
-2. Allow .read_post_process() to adjust (decrease) just buffer length
-3. Register NVMEM cells using post-read sizes
-
-The preferred solution was the last one. The problem is that simply
-adjusting "bytes" in NVMEM providers would result in core code NOT
-passing whole raw data to .read_post_process() callbacks. It means
-callback functions couldn't do their job without somehow manually
-reading original cell content on their own.
-
-This patch deals with that by registering NVMEM cells with both lengths:
-raw content one and post read one. It allows:
-1. Core code to read whole raw cell content
-2. Callbacks to return content they want
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-35-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 11 +++++++----
- include/linux/nvmem-provider.h |  2 ++
- 2 files changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -50,6 +50,7 @@ struct nvmem_device {
- struct nvmem_cell_entry {
- 	const char		*name;
- 	int			offset;
-+	size_t			raw_len;
- 	int			bytes;
- 	int			bit_offset;
- 	int			nbits;
-@@ -468,6 +469,7 @@ static int nvmem_cell_info_to_nvmem_cell
- {
- 	cell->nvmem = nvmem;
- 	cell->offset = info->offset;
-+	cell->raw_len = info->raw_len ?: info->bytes;
- 	cell->bytes = info->bytes;
- 	cell->name = info->name;
- 	cell->read_post_process = info->read_post_process;
-@@ -1559,7 +1561,7 @@ static int __nvmem_cell_read(struct nvme
- {
- 	int rc;
- 
--	rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->bytes);
-+	rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->raw_len);
- 
- 	if (rc)
- 		return rc;
-@@ -1570,7 +1572,7 @@ static int __nvmem_cell_read(struct nvme
- 
- 	if (cell->read_post_process) {
- 		rc = cell->read_post_process(cell->priv, id, index,
--					     cell->offset, buf, cell->bytes);
-+					     cell->offset, buf, cell->raw_len);
- 		if (rc)
- 			return rc;
- 	}
-@@ -1593,14 +1595,15 @@ static int __nvmem_cell_read(struct nvme
-  */
- void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
- {
--	struct nvmem_device *nvmem = cell->entry->nvmem;
-+	struct nvmem_cell_entry *entry = cell->entry;
-+	struct nvmem_device *nvmem = entry->nvmem;
- 	u8 *buf;
- 	int rc;
- 
- 	if (!nvmem)
- 		return ERR_PTR(-EINVAL);
- 
--	buf = kzalloc(cell->entry->bytes, GFP_KERNEL);
-+	buf = kzalloc(max_t(size_t, entry->raw_len, entry->bytes), GFP_KERNEL);
- 	if (!buf)
- 		return ERR_PTR(-ENOMEM);
- 
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -51,6 +51,7 @@ struct nvmem_keepout {
-  * struct nvmem_cell_info - NVMEM cell description
-  * @name:	Name.
-  * @offset:	Offset within the NVMEM device.
-+ * @raw_len:	Length of raw data (without post processing).
-  * @bytes:	Length of the cell.
-  * @bit_offset:	Bit offset if cell is smaller than a byte.
-  * @nbits:	Number of bits.
-@@ -62,6 +63,7 @@ struct nvmem_keepout {
- struct nvmem_cell_info {
- 	const char		*name;
- 	unsigned int		offset;
-+	size_t			raw_len;
- 	unsigned int		bytes;
- 	unsigned int		bit_offset;
- 	unsigned int		nbits;
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0018-nvmem-u-boot-env-post-process-ethaddr-env-variable.patch b/target/linux/generic/backport-6.1/811-v6.4-0018-nvmem-u-boot-env-post-process-ethaddr-env-variable.patch
deleted file mode 100644
index adde0ffc4b17..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0018-nvmem-u-boot-env-post-process-ethaddr-env-variable.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From c49f1a8af6bcf6d18576bca898f8083ca4b129e1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 4 Apr 2023 18:21:43 +0100
-Subject: [PATCH] nvmem: u-boot-env: post-process "ethaddr" env variable
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-U-Boot environment variables are stored in ASCII format so "ethaddr"
-requires parsing into binary to make it work with Ethernet interfaces.
-
-This includes support for indexes to support #nvmem-cell-cells = <1>.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-36-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig      |  1 +
- drivers/nvmem/u-boot-env.c | 26 ++++++++++++++++++++++++++
- 2 files changed, 27 insertions(+)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -340,6 +340,7 @@ config NVMEM_U_BOOT_ENV
- 	tristate "U-Boot environment variables support"
- 	depends on OF && MTD
- 	select CRC32
-+	select GENERIC_NET_UTILS
- 	help
- 	  U-Boot stores its setup as environment variables. This driver adds
- 	  support for verifying & exporting such data. It also exposes variables
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -4,6 +4,8 @@
-  */
- 
- #include <linux/crc32.h>
-+#include <linux/etherdevice.h>
-+#include <linux/if_ether.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
- #include <linux/mtd/mtd.h>
-@@ -70,6 +72,25 @@ static int u_boot_env_read(void *context
- 	return 0;
- }
- 
-+static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, int index,
-+						unsigned int offset, void *buf, size_t bytes)
-+{
-+	u8 mac[ETH_ALEN];
-+
-+	if (bytes != 3 * ETH_ALEN - 1)
-+		return -EINVAL;
-+
-+	if (!mac_pton(buf, mac))
-+		return -EINVAL;
-+
-+	if (index)
-+		eth_addr_add(mac, index);
-+
-+	ether_addr_copy(buf, mac);
-+
-+	return 0;
-+}
-+
- static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
- 				size_t data_offset, size_t data_len)
- {
-@@ -101,6 +122,11 @@ static int u_boot_env_add_cells(struct u
- 		priv->cells[idx].offset = data_offset + value - data;
- 		priv->cells[idx].bytes = strlen(value);
- 		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
-+		if (!strcmp(var, "ethaddr")) {
-+			priv->cells[idx].raw_len = strlen(value);
-+			priv->cells[idx].bytes = ETH_ALEN;
-+			priv->cells[idx].read_post_process = u_boot_env_read_post_process_ethaddr;
-+		}
- 	}
- 
- 	if (WARN_ON(idx != priv->ncells))
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0019-nvmem-Add-macro-to-register-nvmem-layout-drivers.patch b/target/linux/generic/backport-6.1/811-v6.4-0019-nvmem-Add-macro-to-register-nvmem-layout-drivers.patch
deleted file mode 100644
index 7c6fe22b5f3a..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0019-nvmem-Add-macro-to-register-nvmem-layout-drivers.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 814c978f02db17f16e6aa2efa2a929372f06da09 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:44 +0100
-Subject: [PATCH] nvmem: Add macro to register nvmem layout drivers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Provide a module_nvmem_layout_driver() macro at the end of the
-nvmem-provider.h header to reduce the boilerplate when registering nvmem
-layout drivers.
-
-Suggested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-37-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- include/linux/nvmem-provider.h | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -9,6 +9,7 @@
- #ifndef _LINUX_NVMEM_PROVIDER_H
- #define _LINUX_NVMEM_PROVIDER_H
- 
-+#include <linux/device/driver.h>
- #include <linux/err.h>
- #include <linux/errno.h>
- #include <linux/gpio/consumer.h>
-@@ -242,4 +243,9 @@ nvmem_layout_get_match_data(struct nvmem
- }
- 
- #endif /* CONFIG_NVMEM */
-+
-+#define module_nvmem_layout_driver(__layout_driver)		\
-+	module_driver(__layout_driver, nvmem_layout_register,	\
-+		      nvmem_layout_unregister)
-+
- #endif  /* ifndef _LINUX_NVMEM_PROVIDER_H */
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0020-nvmem-layouts-sl28vpd-Use-module_nvmem_layout_driver.patch b/target/linux/generic/backport-6.1/811-v6.4-0020-nvmem-layouts-sl28vpd-Use-module_nvmem_layout_driver.patch
deleted file mode 100644
index 06646dd68bf6..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0020-nvmem-layouts-sl28vpd-Use-module_nvmem_layout_driver.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 0abdf99fe0c86252ba274703425f8d543d7e7f0d Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:45 +0100
-Subject: [PATCH] nvmem: layouts: sl28vpd: Use module_nvmem_layout_driver()
-
-Stop open-coding the module init/exit functions. Use the
-module_nvmem_layout_driver() instead.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-38-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/sl28vpd.c | 14 +-------------
- 1 file changed, 1 insertion(+), 13 deletions(-)
-
---- a/drivers/nvmem/layouts/sl28vpd.c
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -146,19 +146,7 @@ struct nvmem_layout sl28vpd_layout = {
- 	.of_match_table = sl28vpd_of_match_table,
- 	.add_cells = sl28vpd_add_cells,
- };
--
--static int __init sl28vpd_init(void)
--{
--	return nvmem_layout_register(&sl28vpd_layout);
--}
--
--static void __exit sl28vpd_exit(void)
--{
--	nvmem_layout_unregister(&sl28vpd_layout);
--}
--
--module_init(sl28vpd_init);
--module_exit(sl28vpd_exit);
-+module_nvmem_layout_driver(sl28vpd_layout);
- 
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0021-nvmem-layouts-onie-tlv-Use-module_nvmem_layout_drive.patch b/target/linux/generic/backport-6.1/811-v6.4-0021-nvmem-layouts-onie-tlv-Use-module_nvmem_layout_drive.patch
deleted file mode 100644
index 826f4378c2fa..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0021-nvmem-layouts-onie-tlv-Use-module_nvmem_layout_drive.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From d119eb38faab61125aaa4f63c74eef61585cf34c Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:46 +0100
-Subject: [PATCH] nvmem: layouts: onie-tlv: Use module_nvmem_layout_driver()
-
-Stop open-coding the module init/exit functions. Use the
-module_nvmem_layout_driver() instead.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-39-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/onie-tlv.c | 14 +-------------
- 1 file changed, 1 insertion(+), 13 deletions(-)
-
---- a/drivers/nvmem/layouts/onie-tlv.c
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -237,19 +237,7 @@ static struct nvmem_layout onie_tlv_layo
- 	.of_match_table = onie_tlv_of_match_table,
- 	.add_cells = onie_tlv_parse_table,
- };
--
--static int __init onie_tlv_init(void)
--{
--	return nvmem_layout_register(&onie_tlv_layout);
--}
--
--static void __exit onie_tlv_exit(void)
--{
--	nvmem_layout_unregister(&onie_tlv_layout);
--}
--
--module_init(onie_tlv_init);
--module_exit(onie_tlv_exit);
-+module_nvmem_layout_driver(onie_tlv_layout);
- 
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0022-nvmem-layouts-onie-tlv-Drop-wrong-module-alias.patch b/target/linux/generic/backport-6.1/811-v6.4-0022-nvmem-layouts-onie-tlv-Drop-wrong-module-alias.patch
deleted file mode 100644
index f20db85ceb6f..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0022-nvmem-layouts-onie-tlv-Drop-wrong-module-alias.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 6b13e4b6a9a45028ac730e550380077df1845912 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:47 +0100
-Subject: [PATCH] nvmem: layouts: onie-tlv: Drop wrong module alias
-
-The MODULE_ALIAS macro is misused here as it carries the
-description. There is currently no relevant alias to provide so let's
-just drop it.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-40-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/onie-tlv.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/nvmem/layouts/onie-tlv.c
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -242,4 +242,3 @@ module_nvmem_layout_driver(onie_tlv_layo
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
- MODULE_DESCRIPTION("NVMEM layout driver for Onie TLV table parsing");
--MODULE_ALIAS("NVMEM layout driver for Onie TLV table parsing");
diff --git a/target/linux/generic/backport-6.1/811-v6.4-0023-nvmem-layouts-sl28vpd-set-varaiable-sl28vpd_layout-s.patch b/target/linux/generic/backport-6.1/811-v6.4-0023-nvmem-layouts-sl28vpd-set-varaiable-sl28vpd_layout-s.patch
deleted file mode 100644
index 5cf847b57ae1..000000000000
--- a/target/linux/generic/backport-6.1/811-v6.4-0023-nvmem-layouts-sl28vpd-set-varaiable-sl28vpd_layout-s.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From a8642cd11635a35a5f1dc31857887900d6610778 Mon Sep 17 00:00:00 2001
-From: Tom Rix <trix@redhat.com>
-Date: Tue, 4 Apr 2023 18:21:48 +0100
-Subject: [PATCH] nvmem: layouts: sl28vpd: set varaiable sl28vpd_layout
- storage-class-specifier to static
-
-smatch reports
-drivers/nvmem/layouts/sl28vpd.c:144:21: warning: symbol
-  'sl28vpd_layout' was not declared. Should it be static?
-
-This variable is only used in one file so it should be static.
-
-Signed-off-by: Tom Rix <trix@redhat.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-41-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/sl28vpd.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/layouts/sl28vpd.c
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -141,7 +141,7 @@ static const struct of_device_id sl28vpd
- };
- MODULE_DEVICE_TABLE(of, sl28vpd_of_match_table);
- 
--struct nvmem_layout sl28vpd_layout = {
-+static struct nvmem_layout sl28vpd_layout = {
- 	.name = "sl28-vpd",
- 	.of_match_table = sl28vpd_of_match_table,
- 	.add_cells = sl28vpd_add_cells,
diff --git a/target/linux/generic/backport-6.1/812-v6.2-firmware-nvram-bcm47xx-support-init-from-IO-memory.patch b/target/linux/generic/backport-6.1/812-v6.2-firmware-nvram-bcm47xx-support-init-from-IO-memory.patch
deleted file mode 100644
index 13ee2d42293f..000000000000
--- a/target/linux/generic/backport-6.1/812-v6.2-firmware-nvram-bcm47xx-support-init-from-IO-memory.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From a5be5ce0e25439fae3cd42e3d775979547926812 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 3 Nov 2022 09:25:29 +0100
-Subject: [PATCH] firmware/nvram: bcm47xx: support init from IO memory
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Provide NVMEM content to the NVRAM driver from a simple
-memory resource. This is necessary to use NVRAM in a memory-
-mapped flash device. Patch taken from OpenWrts development
-tree.
-
-This patch makes it possible to use memory-mapped NVRAM
-on the D-Link DWL-8610AP and the D-Link DIR-890L.
-
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Cc: linux-mips@vger.kernel.org
-Cc: Florian Fainelli <f.fainelli@gmail.com>
-Cc: bcm-kernel-feedback-list@broadcom.com
-Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-[Added an export for modules potentially using the init symbol]
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-Link: https://lore.kernel.org/r/20221103082529.359084-1-linus.walleij@linaro.org
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/firmware/broadcom/bcm47xx_nvram.c | 18 ++++++++++++++++++
- drivers/nvmem/brcm_nvram.c                |  3 +++
- include/linux/bcm47xx_nvram.h             |  6 ++++++
- 3 files changed, 27 insertions(+)
-
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -110,6 +110,24 @@ found:
- 	return 0;
- }
- 
-+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size)
-+{
-+	if (nvram_len) {
-+		pr_warn("nvram already initialized\n");
-+		return -EEXIST;
-+	}
-+
-+	if (!bcm47xx_nvram_is_valid(nvram_start)) {
-+		pr_err("No valid NVRAM found\n");
-+		return -ENOENT;
-+	}
-+
-+	bcm47xx_nvram_copy(nvram_start, res_size);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(bcm47xx_nvram_init_from_iomem);
-+
- /*
-  * On bcm47xx we need access to the NVRAM very early, so we can't use mtd
-  * subsystem to access flash. We can't even use platform device / driver to
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -3,6 +3,7 @@
-  * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
-  */
- 
-+#include <linux/bcm47xx_nvram.h>
- #include <linux/io.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
-@@ -139,6 +140,8 @@ static int brcm_nvram_probe(struct platf
- 	if (err)
- 		return err;
- 
-+	bcm47xx_nvram_init_from_iomem(priv->base, resource_size(res));
-+
- 	config.dev = dev;
- 	config.cells = priv->cells;
- 	config.ncells = priv->ncells;
---- a/include/linux/bcm47xx_nvram.h
-+++ b/include/linux/bcm47xx_nvram.h
-@@ -11,6 +11,7 @@
- #include <linux/vmalloc.h>
- 
- #ifdef CONFIG_BCM47XX_NVRAM
-+int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start, size_t res_size);
- int bcm47xx_nvram_init_from_mem(u32 base, u32 lim);
- int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len);
- int bcm47xx_nvram_gpio_pin(const char *name);
-@@ -20,6 +21,11 @@ static inline void bcm47xx_nvram_release
- 	vfree(nvram);
- };
- #else
-+static inline int bcm47xx_nvram_init_from_iomem(void __iomem *nvram_start,
-+						size_t res_size)
-+{
-+	return -ENOTSUPP;
-+}
- static inline int bcm47xx_nvram_init_from_mem(u32 base, u32 lim)
- {
- 	return -ENOTSUPP;
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0001-nvmem-imx-ocotp-set-varaiable-imx_ocotp_layout-stora.patch b/target/linux/generic/backport-6.1/813-v6.5-0001-nvmem-imx-ocotp-set-varaiable-imx_ocotp_layout-stora.patch
deleted file mode 100644
index 38cfccd5ef9b..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0001-nvmem-imx-ocotp-set-varaiable-imx_ocotp_layout-stora.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From eebc6573ad940b62a87776db3917e912b4f52d78 Mon Sep 17 00:00:00 2001
-From: Tom Rix <trix@redhat.com>
-Date: Sun, 11 Jun 2023 15:03:05 +0100
-Subject: [PATCH] nvmem: imx-ocotp: set varaiable imx_ocotp_layout
- storage-class-specifier to static
-
-smatch reports
-drivers/nvmem/imx-ocotp.c:599:21: warning: symbol
-  'imx_ocotp_layout' was not declared. Should it be static?
-
-This variable is only used in one file so should be static.
-
-Signed-off-by: Tom Rix <trix@redhat.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-2-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/imx-ocotp.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -596,7 +596,7 @@ static void imx_ocotp_fixup_cell_info(st
- 	cell->read_post_process = imx_ocotp_cell_pp;
- }
- 
--struct nvmem_layout imx_ocotp_layout = {
-+static struct nvmem_layout imx_ocotp_layout = {
- 	.fixup_cell_info = imx_ocotp_fixup_cell_info,
- };
- 
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0002-nvmem-imx-ocotp-Reverse-MAC-addresses-on-all-i.MX-de.patch b/target/linux/generic/backport-6.1/813-v6.5-0002-nvmem-imx-ocotp-Reverse-MAC-addresses-on-all-i.MX-de.patch
deleted file mode 100644
index 7523e5ebf645..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0002-nvmem-imx-ocotp-Reverse-MAC-addresses-on-all-i.MX-de.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 8a00fc606312c68b98add8fe8e6f7a013ce29e78 Mon Sep 17 00:00:00 2001
-From: Alexander Stein <alexander.stein@ew.tq-group.com>
-Date: Sun, 11 Jun 2023 15:03:06 +0100
-Subject: [PATCH] nvmem: imx-ocotp: Reverse MAC addresses on all i.MX derivates
-
-Not just i.MX8M, but all i.MX6/7 (and subtypes) need to reverse the
-MAC address read from fuses. Exceptions are i.MX6SLL and i.MX7ULP which
-do not support ethernet at all.
-
-Fixes: d0221a780cbc ("nvmem: imx-ocotp: add support for post processing")
-Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
-Tested-by: Richard Leitner <richard.leitner@skidata.com> # imx6q
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-3-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/imx-ocotp.c | 8 +-------
- 1 file changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -97,7 +97,6 @@ struct ocotp_params {
- 	unsigned int bank_address_words;
- 	void (*set_timing)(struct ocotp_priv *priv);
- 	struct ocotp_ctrl_reg ctrl;
--	bool reverse_mac_address;
- };
- 
- static int imx_ocotp_wait_for_busy(struct ocotp_priv *priv, u32 flags)
-@@ -545,7 +544,6 @@ static const struct ocotp_params imx8mq_
- 	.bank_address_words = 0,
- 	.set_timing = imx_ocotp_set_imx6_timing,
- 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
--	.reverse_mac_address = true,
- };
- 
- static const struct ocotp_params imx8mm_params = {
-@@ -553,7 +551,6 @@ static const struct ocotp_params imx8mm_
- 	.bank_address_words = 0,
- 	.set_timing = imx_ocotp_set_imx6_timing,
- 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
--	.reverse_mac_address = true,
- };
- 
- static const struct ocotp_params imx8mn_params = {
-@@ -561,7 +558,6 @@ static const struct ocotp_params imx8mn_
- 	.bank_address_words = 0,
- 	.set_timing = imx_ocotp_set_imx6_timing,
- 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
--	.reverse_mac_address = true,
- };
- 
- static const struct ocotp_params imx8mp_params = {
-@@ -569,7 +565,6 @@ static const struct ocotp_params imx8mp_
- 	.bank_address_words = 0,
- 	.set_timing = imx_ocotp_set_imx6_timing,
- 	.ctrl = IMX_OCOTP_BM_CTRL_8MP,
--	.reverse_mac_address = true,
- };
- 
- static const struct of_device_id imx_ocotp_dt_ids[] = {
-@@ -624,8 +619,7 @@ static int imx_ocotp_probe(struct platfo
- 	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
- 	imx_ocotp_nvmem_config.dev = dev;
- 	imx_ocotp_nvmem_config.priv = priv;
--	if (priv->params->reverse_mac_address)
--		imx_ocotp_nvmem_config.layout = &imx_ocotp_layout;
-+	imx_ocotp_nvmem_config.layout = &imx_ocotp_layout;
- 
- 	priv->config = &imx_ocotp_nvmem_config;
- 
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0003-nvmem-brcm_nvram-add-.read_post_process-for-MACs.patch b/target/linux/generic/backport-6.1/813-v6.5-0003-nvmem-brcm_nvram-add-.read_post_process-for-MACs.patch
deleted file mode 100644
index fb4d346a95ad..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0003-nvmem-brcm_nvram-add-.read_post_process-for-MACs.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 73bcd133c910bff3b6d3b3834d0d14be9444e90a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 11 Jun 2023 15:03:08 +0100
-Subject: [PATCH] nvmem: brcm_nvram: add .read_post_process() for MACs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Parse ASCII MAC format into byte based
-2. Calculate relative addresses based on index argument
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-5-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig      |  1 +
- drivers/nvmem/brcm_nvram.c | 28 ++++++++++++++++++++++++++++
- 2 files changed, 29 insertions(+)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -55,6 +55,7 @@ config NVMEM_BRCM_NVRAM
- 	tristate "Broadcom's NVRAM support"
- 	depends on ARCH_BCM_5301X || COMPILE_TEST
- 	depends on HAS_IOMEM
-+	select GENERIC_NET_UTILS
- 	help
- 	  This driver provides support for Broadcom's NVRAM that can be accessed
- 	  using I/O mapping.
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -4,6 +4,8 @@
-  */
- 
- #include <linux/bcm47xx_nvram.h>
-+#include <linux/etherdevice.h>
-+#include <linux/if_ether.h>
- #include <linux/io.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
-@@ -42,6 +44,25 @@ static int brcm_nvram_read(void *context
- 	return 0;
- }
- 
-+static int brcm_nvram_read_post_process_macaddr(void *context, const char *id, int index,
-+						unsigned int offset, void *buf, size_t bytes)
-+{
-+	u8 mac[ETH_ALEN];
-+
-+	if (bytes != 3 * ETH_ALEN - 1)
-+		return -EINVAL;
-+
-+	if (!mac_pton(buf, mac))
-+		return -EINVAL;
-+
-+	if (index)
-+		eth_addr_add(mac, index);
-+
-+	ether_addr_copy(buf, mac);
-+
-+	return 0;
-+}
-+
- static int brcm_nvram_add_cells(struct brcm_nvram *priv, uint8_t *data,
- 				size_t len)
- {
-@@ -75,6 +96,13 @@ static int brcm_nvram_add_cells(struct b
- 		priv->cells[idx].offset = value - (char *)data;
- 		priv->cells[idx].bytes = strlen(value);
- 		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
-+		if (!strcmp(var, "et0macaddr") ||
-+		    !strcmp(var, "et1macaddr") ||
-+		    !strcmp(var, "et2macaddr")) {
-+			priv->cells[idx].raw_len = strlen(value);
-+			priv->cells[idx].bytes = ETH_ALEN;
-+			priv->cells[idx].read_post_process = brcm_nvram_read_post_process_macaddr;
-+		}
- 	}
- 
- 	return 0;
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0004-nvmem-rockchip-otp-Add-clks-and-reg_read-to-rockchip.patch b/target/linux/generic/backport-6.1/813-v6.5-0004-nvmem-rockchip-otp-Add-clks-and-reg_read-to-rockchip.patch
deleted file mode 100644
index 3b6e6e57f52b..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0004-nvmem-rockchip-otp-Add-clks-and-reg_read-to-rockchip.patch
+++ /dev/null
@@ -1,166 +0,0 @@
-From 8dc61364164e79e44c07fa2ac0a7b6939f00d5db Mon Sep 17 00:00:00 2001
-From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Date: Sun, 11 Jun 2023 15:03:13 +0100
-Subject: [PATCH] nvmem: rockchip-otp: Add clks and reg_read to rockchip_data
-
-In preparation to support new Rockchip OTP memory devices with different
-clock configurations and register layout, extend rockchip_data struct
-with the related members: clks, num_clks, reg_read.
-
-Additionally, to avoid managing redundant driver data, drop num_clks
-member from rockchip_otp struct and update all references to point to
-the equivalent member in rockchip_data.
-
-Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-10-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rockchip-otp.c | 79 ++++++++++++++++++++++--------------
- 1 file changed, 49 insertions(+), 30 deletions(-)
-
---- a/drivers/nvmem/rockchip-otp.c
-+++ b/drivers/nvmem/rockchip-otp.c
-@@ -54,21 +54,19 @@
- 
- #define OTPC_TIMEOUT			10000
- 
-+struct rockchip_data {
-+	int size;
-+	const char * const *clks;
-+	int num_clks;
-+	nvmem_reg_read_t reg_read;
-+};
-+
- struct rockchip_otp {
- 	struct device *dev;
- 	void __iomem *base;
--	struct clk_bulk_data	*clks;
--	int num_clks;
-+	struct clk_bulk_data *clks;
- 	struct reset_control *rst;
--};
--
--/* list of required clocks */
--static const char * const rockchip_otp_clocks[] = {
--	"otp", "apb_pclk", "phy",
--};
--
--struct rockchip_data {
--	int size;
-+	const struct rockchip_data *data;
- };
- 
- static int rockchip_otp_reset(struct rockchip_otp *otp)
-@@ -132,29 +130,23 @@ static int rockchip_otp_ecc_enable(struc
- 	return ret;
- }
- 
--static int rockchip_otp_read(void *context, unsigned int offset,
--			     void *val, size_t bytes)
-+static int px30_otp_read(void *context, unsigned int offset,
-+			 void *val, size_t bytes)
- {
- 	struct rockchip_otp *otp = context;
- 	u8 *buf = val;
--	int ret = 0;
--
--	ret = clk_bulk_prepare_enable(otp->num_clks, otp->clks);
--	if (ret < 0) {
--		dev_err(otp->dev, "failed to prepare/enable clks\n");
--		return ret;
--	}
-+	int ret;
- 
- 	ret = rockchip_otp_reset(otp);
- 	if (ret) {
- 		dev_err(otp->dev, "failed to reset otp phy\n");
--		goto disable_clks;
-+		return ret;
- 	}
- 
- 	ret = rockchip_otp_ecc_enable(otp, false);
- 	if (ret < 0) {
- 		dev_err(otp->dev, "rockchip_otp_ecc_enable err\n");
--		goto disable_clks;
-+		return ret;
- 	}
- 
- 	writel(OTPC_USE_USER | OTPC_USE_USER_MASK, otp->base + OTPC_USER_CTRL);
-@@ -174,8 +166,28 @@ static int rockchip_otp_read(void *conte
- 
- read_end:
- 	writel(0x0 | OTPC_USE_USER_MASK, otp->base + OTPC_USER_CTRL);
--disable_clks:
--	clk_bulk_disable_unprepare(otp->num_clks, otp->clks);
-+
-+	return ret;
-+}
-+
-+static int rockchip_otp_read(void *context, unsigned int offset,
-+			     void *val, size_t bytes)
-+{
-+	struct rockchip_otp *otp = context;
-+	int ret;
-+
-+	if (!otp->data || !otp->data->reg_read)
-+		return -EINVAL;
-+
-+	ret = clk_bulk_prepare_enable(otp->data->num_clks, otp->clks);
-+	if (ret < 0) {
-+		dev_err(otp->dev, "failed to prepare/enable clks\n");
-+		return ret;
-+	}
-+
-+	ret = otp->data->reg_read(context, offset, val, bytes);
-+
-+	clk_bulk_disable_unprepare(otp->data->num_clks, otp->clks);
- 
- 	return ret;
- }
-@@ -189,8 +201,15 @@ static struct nvmem_config otp_config =
- 	.reg_read = rockchip_otp_read,
- };
- 
-+static const char * const px30_otp_clocks[] = {
-+	"otp", "apb_pclk", "phy",
-+};
-+
- static const struct rockchip_data px30_data = {
- 	.size = 0x40,
-+	.clks = px30_otp_clocks,
-+	.num_clks = ARRAY_SIZE(px30_otp_clocks),
-+	.reg_read = px30_otp_read,
- };
- 
- static const struct of_device_id rockchip_otp_match[] = {
-@@ -225,21 +244,21 @@ static int rockchip_otp_probe(struct pla
- 	if (!otp)
- 		return -ENOMEM;
- 
-+	otp->data = data;
- 	otp->dev = dev;
- 	otp->base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(otp->base))
- 		return PTR_ERR(otp->base);
- 
--	otp->num_clks = ARRAY_SIZE(rockchip_otp_clocks);
--	otp->clks = devm_kcalloc(dev, otp->num_clks,
--				     sizeof(*otp->clks), GFP_KERNEL);
-+	otp->clks = devm_kcalloc(dev, data->num_clks, sizeof(*otp->clks),
-+				 GFP_KERNEL);
- 	if (!otp->clks)
- 		return -ENOMEM;
- 
--	for (i = 0; i < otp->num_clks; ++i)
--		otp->clks[i].id = rockchip_otp_clocks[i];
-+	for (i = 0; i < data->num_clks; ++i)
-+		otp->clks[i].id = data->clks[i];
- 
--	ret = devm_clk_bulk_get(dev, otp->num_clks, otp->clks);
-+	ret = devm_clk_bulk_get(dev, data->num_clks, otp->clks);
- 	if (ret)
- 		return ret;
- 
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0005-nvmem-rockchip-otp-Generalize-rockchip_otp_wait_stat.patch b/target/linux/generic/backport-6.1/813-v6.5-0005-nvmem-rockchip-otp-Generalize-rockchip_otp_wait_stat.patch
deleted file mode 100644
index b5b66cfc5ac0..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0005-nvmem-rockchip-otp-Generalize-rockchip_otp_wait_stat.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 30fd21cfb1e64ef20035559a8246f5fbf682c40e Mon Sep 17 00:00:00 2001
-From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Date: Sun, 11 Jun 2023 15:03:14 +0100
-Subject: [PATCH] nvmem: rockchip-otp: Generalize rockchip_otp_wait_status()
-
-In preparation to support additional Rockchip OTP memory devices with
-different register layout, generalize rockchip_otp_wait_status() to
-accept a new parameter for specifying the offset of the status register.
-
-Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-11-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rockchip-otp.c | 11 ++++++-----
- 1 file changed, 6 insertions(+), 5 deletions(-)
-
---- a/drivers/nvmem/rockchip-otp.c
-+++ b/drivers/nvmem/rockchip-otp.c
-@@ -90,18 +90,19 @@ static int rockchip_otp_reset(struct roc
- 	return 0;
- }
- 
--static int rockchip_otp_wait_status(struct rockchip_otp *otp, u32 flag)
-+static int rockchip_otp_wait_status(struct rockchip_otp *otp,
-+				    unsigned int reg, u32 flag)
- {
- 	u32 status = 0;
- 	int ret;
- 
--	ret = readl_poll_timeout_atomic(otp->base + OTPC_INT_STATUS, status,
-+	ret = readl_poll_timeout_atomic(otp->base + reg, status,
- 					(status & flag), 1, OTPC_TIMEOUT);
- 	if (ret)
- 		return ret;
- 
- 	/* clean int status */
--	writel(flag, otp->base + OTPC_INT_STATUS);
-+	writel(flag, otp->base + reg);
- 
- 	return 0;
- }
-@@ -123,7 +124,7 @@ static int rockchip_otp_ecc_enable(struc
- 
- 	writel(SBPI_ENABLE_MASK | SBPI_ENABLE, otp->base + OTPC_SBPI_CTRL);
- 
--	ret = rockchip_otp_wait_status(otp, OTPC_SBPI_DONE);
-+	ret = rockchip_otp_wait_status(otp, OTPC_INT_STATUS, OTPC_SBPI_DONE);
- 	if (ret < 0)
- 		dev_err(otp->dev, "timeout during ecc_enable\n");
- 
-@@ -156,7 +157,7 @@ static int px30_otp_read(void *context,
- 		       otp->base + OTPC_USER_ADDR);
- 		writel(OTPC_USER_FSM_ENABLE | OTPC_USER_FSM_ENABLE_MASK,
- 		       otp->base + OTPC_USER_ENABLE);
--		ret = rockchip_otp_wait_status(otp, OTPC_USER_DONE);
-+		ret = rockchip_otp_wait_status(otp, OTPC_INT_STATUS, OTPC_USER_DONE);
- 		if (ret < 0) {
- 			dev_err(otp->dev, "timeout during read setup\n");
- 			goto read_end;
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0006-nvmem-rockchip-otp-Use-devm_reset_control_array_get_.patch b/target/linux/generic/backport-6.1/813-v6.5-0006-nvmem-rockchip-otp-Use-devm_reset_control_array_get_.patch
deleted file mode 100644
index 3a17479d959b..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0006-nvmem-rockchip-otp-Use-devm_reset_control_array_get_.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From d325c9dd2b6e94040ca722ddcadcd6af358dd2be Mon Sep 17 00:00:00 2001
-From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Date: Sun, 11 Jun 2023 15:03:15 +0100
-Subject: [PATCH] nvmem: rockchip-otp: Use
- devm_reset_control_array_get_exclusive()
-
-In preparation to support new Rockchip OTP memory devices having
-specific reset configurations, switch devm_reset_control_get() to
-devm_reset_control_array_get_exclusive().
-
-Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-12-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rockchip-otp.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/rockchip-otp.c
-+++ b/drivers/nvmem/rockchip-otp.c
-@@ -263,7 +263,7 @@ static int rockchip_otp_probe(struct pla
- 	if (ret)
- 		return ret;
- 
--	otp->rst = devm_reset_control_get(dev, "phy");
-+	otp->rst = devm_reset_control_array_get_exclusive(dev);
- 	if (IS_ERR(otp->rst))
- 		return PTR_ERR(otp->rst);
- 
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0007-nvmem-rockchip-otp-Improve-probe-error-handling.patch b/target/linux/generic/backport-6.1/813-v6.5-0007-nvmem-rockchip-otp-Improve-probe-error-handling.patch
deleted file mode 100644
index 37cb927b1002..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0007-nvmem-rockchip-otp-Improve-probe-error-handling.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 912517345b867a69542dc9f5c2cc3e9d8beaccf5 Mon Sep 17 00:00:00 2001
-From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Date: Sun, 11 Jun 2023 15:03:16 +0100
-Subject: [PATCH] nvmem: rockchip-otp: Improve probe error handling
-
-Enhance error handling in the probe function by making use of
-dev_err_probe(), which ensures the error code is always printed, in
-addition to the specified error message.
-
-Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-13-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rockchip-otp.c | 21 ++++++++++++---------
- 1 file changed, 12 insertions(+), 9 deletions(-)
-
---- a/drivers/nvmem/rockchip-otp.c
-+++ b/drivers/nvmem/rockchip-otp.c
-@@ -235,10 +235,8 @@ static int rockchip_otp_probe(struct pla
- 	int ret, i;
- 
- 	data = of_device_get_match_data(dev);
--	if (!data) {
--		dev_err(dev, "failed to get match data\n");
--		return -EINVAL;
--	}
-+	if (!data)
-+		return dev_err_probe(dev, -EINVAL, "failed to get match data\n");
- 
- 	otp = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_otp),
- 			   GFP_KERNEL);
-@@ -249,7 +247,8 @@ static int rockchip_otp_probe(struct pla
- 	otp->dev = dev;
- 	otp->base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(otp->base))
--		return PTR_ERR(otp->base);
-+		return dev_err_probe(dev, PTR_ERR(otp->base),
-+				     "failed to ioremap resource\n");
- 
- 	otp->clks = devm_kcalloc(dev, data->num_clks, sizeof(*otp->clks),
- 				 GFP_KERNEL);
-@@ -261,18 +260,22 @@ static int rockchip_otp_probe(struct pla
- 
- 	ret = devm_clk_bulk_get(dev, data->num_clks, otp->clks);
- 	if (ret)
--		return ret;
-+		return dev_err_probe(dev, ret, "failed to get clocks\n");
- 
- 	otp->rst = devm_reset_control_array_get_exclusive(dev);
- 	if (IS_ERR(otp->rst))
--		return PTR_ERR(otp->rst);
-+		return dev_err_probe(dev, PTR_ERR(otp->rst),
-+				     "failed to get resets\n");
- 
- 	otp_config.size = data->size;
- 	otp_config.priv = otp;
- 	otp_config.dev = dev;
--	nvmem = devm_nvmem_register(dev, &otp_config);
- 
--	return PTR_ERR_OR_ZERO(nvmem);
-+	nvmem = devm_nvmem_register(dev, &otp_config);
-+	if (IS_ERR(nvmem))
-+		return dev_err_probe(dev, PTR_ERR(nvmem),
-+				     "failed to register nvmem device\n");
-+	return 0;
- }
- 
- static struct platform_driver rockchip_otp_driver = {
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0008-nvmem-rockchip-otp-Add-support-for-RK3588.patch b/target/linux/generic/backport-6.1/813-v6.5-0008-nvmem-rockchip-otp-Add-support-for-RK3588.patch
deleted file mode 100644
index c1e2231c9ec9..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0008-nvmem-rockchip-otp-Add-support-for-RK3588.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 8ab099fafbbc8c9607c399d21a774784a6cb8b45 Mon Sep 17 00:00:00 2001
-From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Date: Sun, 11 Jun 2023 15:03:17 +0100
-Subject: [PATCH] nvmem: rockchip-otp: Add support for RK3588
-
-Add support for the OTP memory device found on the Rockchip RK3588 SoC.
-
-While here, remove the unnecessary 'void *' casts in the OF device ID
-table.
-
-Co-developed-by: Finley Xiao <finley.xiao@rock-chips.com>
-Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
-Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
-Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-14-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rockchip-otp.c | 78 +++++++++++++++++++++++++++++++++++-
- 1 file changed, 76 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/rockchip-otp.c
-+++ b/drivers/nvmem/rockchip-otp.c
-@@ -54,6 +54,19 @@
- 
- #define OTPC_TIMEOUT			10000
- 
-+/* RK3588 Register */
-+#define RK3588_OTPC_AUTO_CTRL		0x04
-+#define RK3588_OTPC_AUTO_EN		0x08
-+#define RK3588_OTPC_INT_ST		0x84
-+#define RK3588_OTPC_DOUT0		0x20
-+#define RK3588_NO_SECURE_OFFSET		0x300
-+#define RK3588_NBYTES			4
-+#define RK3588_BURST_NUM		1
-+#define RK3588_BURST_SHIFT		8
-+#define RK3588_ADDR_SHIFT		16
-+#define RK3588_AUTO_EN			BIT(0)
-+#define RK3588_RD_DONE			BIT(1)
-+
- struct rockchip_data {
- 	int size;
- 	const char * const *clks;
-@@ -171,6 +184,52 @@ read_end:
- 	return ret;
- }
- 
-+static int rk3588_otp_read(void *context, unsigned int offset,
-+			   void *val, size_t bytes)
-+{
-+	struct rockchip_otp *otp = context;
-+	unsigned int addr_start, addr_end, addr_len;
-+	int ret, i = 0;
-+	u32 data;
-+	u8 *buf;
-+
-+	addr_start = round_down(offset, RK3588_NBYTES) / RK3588_NBYTES;
-+	addr_end = round_up(offset + bytes, RK3588_NBYTES) / RK3588_NBYTES;
-+	addr_len = addr_end - addr_start;
-+	addr_start += RK3588_NO_SECURE_OFFSET;
-+
-+	buf = kzalloc(array_size(addr_len, RK3588_NBYTES), GFP_KERNEL);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+	while (addr_len--) {
-+		writel((addr_start << RK3588_ADDR_SHIFT) |
-+		       (RK3588_BURST_NUM << RK3588_BURST_SHIFT),
-+		       otp->base + RK3588_OTPC_AUTO_CTRL);
-+		writel(RK3588_AUTO_EN, otp->base + RK3588_OTPC_AUTO_EN);
-+
-+		ret = rockchip_otp_wait_status(otp, RK3588_OTPC_INT_ST,
-+					       RK3588_RD_DONE);
-+		if (ret < 0) {
-+			dev_err(otp->dev, "timeout during read setup\n");
-+			goto read_end;
-+		}
-+
-+		data = readl(otp->base + RK3588_OTPC_DOUT0);
-+		memcpy(&buf[i], &data, RK3588_NBYTES);
-+
-+		i += RK3588_NBYTES;
-+		addr_start++;
-+	}
-+
-+	memcpy(val, buf + offset % RK3588_NBYTES, bytes);
-+
-+read_end:
-+	kfree(buf);
-+
-+	return ret;
-+}
-+
- static int rockchip_otp_read(void *context, unsigned int offset,
- 			     void *val, size_t bytes)
- {
-@@ -213,14 +272,29 @@ static const struct rockchip_data px30_d
- 	.reg_read = px30_otp_read,
- };
- 
-+static const char * const rk3588_otp_clocks[] = {
-+	"otp", "apb_pclk", "phy", "arb",
-+};
-+
-+static const struct rockchip_data rk3588_data = {
-+	.size = 0x400,
-+	.clks = rk3588_otp_clocks,
-+	.num_clks = ARRAY_SIZE(rk3588_otp_clocks),
-+	.reg_read = rk3588_otp_read,
-+};
-+
- static const struct of_device_id rockchip_otp_match[] = {
- 	{
- 		.compatible = "rockchip,px30-otp",
--		.data = (void *)&px30_data,
-+		.data = &px30_data,
- 	},
- 	{
- 		.compatible = "rockchip,rk3308-otp",
--		.data = (void *)&px30_data,
-+		.data = &px30_data,
-+	},
-+	{
-+		.compatible = "rockchip,rk3588-otp",
-+		.data = &rk3588_data,
- 	},
- 	{ /* sentinel */ },
- };
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0009-nvmem-zynqmp-Switch-xilinx.com-emails-to-amd.com.patch b/target/linux/generic/backport-6.1/813-v6.5-0009-nvmem-zynqmp-Switch-xilinx.com-emails-to-amd.com.patch
deleted file mode 100644
index 220e3e9a05f3..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0009-nvmem-zynqmp-Switch-xilinx.com-emails-to-amd.com.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 9734408969e978a1c0d5d752be63dd638288e374 Mon Sep 17 00:00:00 2001
-From: Michal Simek <michal.simek@amd.com>
-Date: Sun, 11 Jun 2023 15:03:23 +0100
-Subject: [PATCH] nvmem: zynqmp: Switch @xilinx.com emails to @amd.com
-
-@xilinx.com is still working but better to switch to new amd.com after
-AMD/Xilinx acquisition.
-
-Signed-off-by: Michal Simek <michal.simek@amd.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-20-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/zynqmp_nvmem.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/zynqmp_nvmem.c
-+++ b/drivers/nvmem/zynqmp_nvmem.c
-@@ -76,6 +76,6 @@ static struct platform_driver zynqmp_nvm
- 
- module_platform_driver(zynqmp_nvmem_driver);
- 
--MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>, Nava kishore Manne <navam@xilinx.com>");
-+MODULE_AUTHOR("Michal Simek <michal.simek@amd.com>, Nava kishore Manne <nava.kishore.manne@amd.com>");
- MODULE_DESCRIPTION("ZynqMP NVMEM driver");
- MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0010-nvmem-imx-support-i.MX93-OCOTP.patch b/target/linux/generic/backport-6.1/813-v6.5-0010-nvmem-imx-support-i.MX93-OCOTP.patch
deleted file mode 100644
index f8e6be424160..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0010-nvmem-imx-support-i.MX93-OCOTP.patch
+++ /dev/null
@@ -1,230 +0,0 @@
-From 22e9e6fcfb5042cb6d6c7874c459b034800092f1 Mon Sep 17 00:00:00 2001
-From: Peng Fan <peng.fan@nxp.com>
-Date: Sun, 11 Jun 2023 15:03:25 +0100
-Subject: [PATCH] nvmem: imx: support i.MX93 OCOTP
-
-Add i.MX93 OCOTP support. i.MX93 OCOTP has two parts: Fuse shadow
-block(fsb) and fuse managed by ELE. The FSB part could be directly
-accessed with MMIO, the ELE could only be accessed with ELE API.
-
-Currently the ELE API is not ready, so NULL function callback is used,
-but it was tested with downstream ELE API.
-
-Signed-off-by: Peng Fan <peng.fan@nxp.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-22-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig         |   9 ++
- drivers/nvmem/Makefile        |   2 +
- drivers/nvmem/imx-ocotp-ele.c | 175 ++++++++++++++++++++++++++++++++++
- 3 files changed, 186 insertions(+)
- create mode 100644 drivers/nvmem/imx-ocotp-ele.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -83,6 +83,15 @@ config NVMEM_IMX_OCOTP
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem-imx-ocotp.
- 
-+config NVMEM_IMX_OCOTP_ELE
-+	tristate "i.MX On-Chip OTP Controller support"
-+	depends on ARCH_MXC || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	depends on OF
-+	help
-+	  This is a driver for the On-Chip OTP Controller (OCOTP)
-+	  available on i.MX SoCs which has ELE.
-+
- config NVMEM_IMX_OCOTP_SCU
- 	tristate "i.MX8 SCU On-Chip OTP Controller support"
- 	depends on IMX_SCU
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -18,6 +18,8 @@ obj-$(CONFIG_NVMEM_IMX_IIM)		+= nvmem-im
- nvmem-imx-iim-y				:= imx-iim.o
- obj-$(CONFIG_NVMEM_IMX_OCOTP)		+= nvmem-imx-ocotp.o
- nvmem-imx-ocotp-y			:= imx-ocotp.o
-+obj-$(CONFIG_NVMEM_IMX_OCOTP_ELE)	+= nvmem-imx-ocotp-ele.o
-+nvmem-imx-ocotp-ele-y			:= imx-ocotp-ele.o
- obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvmem-imx-ocotp-scu.o
- nvmem-imx-ocotp-scu-y			:= imx-ocotp-scu.o
- obj-$(CONFIG_NVMEM_JZ4780_EFUSE)	+= nvmem_jz4780_efuse.o
---- /dev/null
-+++ b/drivers/nvmem/imx-ocotp-ele.c
-@@ -0,0 +1,175 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * i.MX9 OCOTP fusebox driver
-+ *
-+ * Copyright 2023 NXP
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+enum fuse_type {
-+	FUSE_FSB = 1,
-+	FUSE_ELE = 2,
-+	FUSE_INVALID = -1
-+};
-+
-+struct ocotp_map_entry {
-+	u32 start; /* start word */
-+	u32 num; /* num words */
-+	enum fuse_type type;
-+};
-+
-+struct ocotp_devtype_data {
-+	u32 reg_off;
-+	char *name;
-+	u32 size;
-+	u32 num_entry;
-+	u32 flag;
-+	nvmem_reg_read_t reg_read;
-+	struct ocotp_map_entry entry[];
-+};
-+
-+struct imx_ocotp_priv {
-+	struct device *dev;
-+	void __iomem *base;
-+	struct nvmem_config config;
-+	struct mutex lock;
-+	const struct ocotp_devtype_data *data;
-+};
-+
-+static enum fuse_type imx_ocotp_fuse_type(void *context, u32 index)
-+{
-+	struct imx_ocotp_priv *priv = context;
-+	const struct ocotp_devtype_data *data = priv->data;
-+	u32 start, end;
-+	int i;
-+
-+	for (i = 0; i < data->num_entry; i++) {
-+		start = data->entry[i].start;
-+		end = data->entry[i].start + data->entry[i].num;
-+
-+		if (index >= start && index < end)
-+			return data->entry[i].type;
-+	}
-+
-+	return FUSE_INVALID;
-+}
-+
-+static int imx_ocotp_reg_read(void *context, unsigned int offset, void *val, size_t bytes)
-+{
-+	struct imx_ocotp_priv *priv = context;
-+	void __iomem *reg = priv->base + priv->data->reg_off;
-+	u32 count, index, num_bytes;
-+	enum fuse_type type;
-+	u32 *buf;
-+	void *p;
-+	int i;
-+
-+	index = offset;
-+	num_bytes = round_up(bytes, 4);
-+	count = num_bytes >> 2;
-+
-+	if (count > ((priv->data->size >> 2) - index))
-+		count = (priv->data->size >> 2) - index;
-+
-+	p = kzalloc(num_bytes, GFP_KERNEL);
-+	if (!p)
-+		return -ENOMEM;
-+
-+	mutex_lock(&priv->lock);
-+
-+	buf = p;
-+
-+	for (i = index; i < (index + count); i++) {
-+		type = imx_ocotp_fuse_type(context, i);
-+		if (type == FUSE_INVALID || type == FUSE_ELE) {
-+			*buf++ = 0;
-+			continue;
-+		}
-+
-+		*buf++ = readl_relaxed(reg + (i << 2));
-+	}
-+
-+	memcpy(val, (u8 *)p, bytes);
-+
-+	mutex_unlock(&priv->lock);
-+
-+	kfree(p);
-+
-+	return 0;
-+};
-+
-+static int imx_ele_ocotp_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct imx_ocotp_priv *priv;
-+	struct nvmem_device *nvmem;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->data = of_device_get_match_data(dev);
-+
-+	priv->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(priv->base))
-+		return PTR_ERR(priv->base);
-+
-+	priv->config.dev = dev;
-+	priv->config.name = "ELE-OCOTP";
-+	priv->config.id = NVMEM_DEVID_AUTO;
-+	priv->config.owner = THIS_MODULE;
-+	priv->config.size = priv->data->size;
-+	priv->config.reg_read = priv->data->reg_read;
-+	priv->config.word_size = 4;
-+	priv->config.stride = 1;
-+	priv->config.priv = priv;
-+	priv->config.read_only = true;
-+	mutex_init(&priv->lock);
-+
-+	nvmem = devm_nvmem_register(dev, &priv->config);
-+	if (IS_ERR(nvmem))
-+		return PTR_ERR(nvmem);
-+
-+	return 0;
-+}
-+
-+static const struct ocotp_devtype_data imx93_ocotp_data = {
-+	.reg_off = 0x8000,
-+	.reg_read = imx_ocotp_reg_read,
-+	.size = 2048,
-+	.num_entry = 6,
-+	.entry = {
-+		{ 0, 52, FUSE_FSB },
-+		{ 63, 1, FUSE_ELE},
-+		{ 128, 16, FUSE_ELE },
-+		{ 182, 1, FUSE_ELE },
-+		{ 188, 1, FUSE_ELE },
-+		{ 312, 200, FUSE_FSB }
-+	},
-+};
-+
-+static const struct of_device_id imx_ele_ocotp_dt_ids[] = {
-+	{ .compatible = "fsl,imx93-ocotp", .data = &imx93_ocotp_data, },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, imx_ele_ocotp_dt_ids);
-+
-+static struct platform_driver imx_ele_ocotp_driver = {
-+	.driver = {
-+		.name = "imx_ele_ocotp",
-+		.of_match_table = imx_ele_ocotp_dt_ids,
-+	},
-+	.probe = imx_ele_ocotp_probe,
-+};
-+module_platform_driver(imx_ele_ocotp_driver);
-+
-+MODULE_DESCRIPTION("i.MX OCOTP/ELE driver");
-+MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-6.1/813-v6.5-0011-nvmem-core-add-support-for-fixed-cells-layout.patch b/target/linux/generic/backport-6.1/813-v6.5-0011-nvmem-core-add-support-for-fixed-cells-layout.patch
deleted file mode 100644
index 3b4654822a47..000000000000
--- a/target/linux/generic/backport-6.1/813-v6.5-0011-nvmem-core-add-support-for-fixed-cells-layout.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 27f699e578b1a72df89dfa3bc42e093a01dc8d10 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 11 Jun 2023 15:03:29 +0100
-Subject: [PATCH] nvmem: core: add support for fixed cells *layout*
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds support for the "fixed-layout" NVMEM layout binding. It allows
-defining NVMEM cells in a layout DT node named "nvmem-layout".
-
-While NVMEM subsystem supports layout drivers it has been discussed that
-"fixed-layout" may actually be supperted internally. It's because:
-1. It's a very basic layout
-2. It allows sharing code with legacy syntax parsing
-3. It's safer for soc_device_match() due to -EPROBE_DEFER
-4. This will make the syntax transition easier
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Message-ID: <20230611140330.154222-26-srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 32 +++++++++++++++++++++++++++++---
- 1 file changed, 29 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -695,7 +695,7 @@ static int nvmem_validate_keepouts(struc
- 	return 0;
- }
- 
--static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
-+static int nvmem_add_cells_from_dt(struct nvmem_device *nvmem, struct device_node *np)
- {
- 	struct nvmem_layout *layout = nvmem->layout;
- 	struct device *dev = &nvmem->dev;
-@@ -703,7 +703,7 @@ static int nvmem_add_cells_from_of(struc
- 	const __be32 *addr;
- 	int len, ret;
- 
--	for_each_child_of_node(dev->of_node, child) {
-+	for_each_child_of_node(np, child) {
- 		struct nvmem_cell_info info = {0};
- 
- 		addr = of_get_property(child, "reg", &len);
-@@ -741,6 +741,28 @@ static int nvmem_add_cells_from_of(struc
- 	return 0;
- }
- 
-+static int nvmem_add_cells_from_legacy_of(struct nvmem_device *nvmem)
-+{
-+	return nvmem_add_cells_from_dt(nvmem, nvmem->dev.of_node);
-+}
-+
-+static int nvmem_add_cells_from_fixed_layout(struct nvmem_device *nvmem)
-+{
-+	struct device_node *layout_np;
-+	int err = 0;
-+
-+	layout_np = of_nvmem_layout_get_container(nvmem);
-+	if (!layout_np)
-+		return 0;
-+
-+	if (of_device_is_compatible(layout_np, "fixed-layout"))
-+		err = nvmem_add_cells_from_dt(nvmem, layout_np);
-+
-+	of_node_put(layout_np);
-+
-+	return err;
-+}
-+
- int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner)
- {
- 	layout->owner = owner;
-@@ -971,7 +993,7 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_cells;
- 
--	rval = nvmem_add_cells_from_of(nvmem);
-+	rval = nvmem_add_cells_from_legacy_of(nvmem);
- 	if (rval)
- 		goto err_remove_cells;
- 
-@@ -981,6 +1003,10 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_cells;
- 
-+	rval = nvmem_add_cells_from_fixed_layout(nvmem);
-+	if (rval)
-+		goto err_remove_cells;
-+
- 	rval = nvmem_add_cells_from_layout(nvmem);
- 	if (rval)
- 		goto err_remove_cells;
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0001-nvmem-sunxi_sid-Convert-to-devm_platform_ioremap_res.patch b/target/linux/generic/backport-6.1/814-v6.6-0001-nvmem-sunxi_sid-Convert-to-devm_platform_ioremap_res.patch
deleted file mode 100644
index bf7a816bb225..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0001-nvmem-sunxi_sid-Convert-to-devm_platform_ioremap_res.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 9ccfcbeb8f32ff89e99b36cb9cdebaa0d1b44ed1 Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Wed, 23 Aug 2023 14:27:24 +0100
-Subject: [PATCH] nvmem: sunxi_sid: Convert to devm_platform_ioremap_resource()
-
-Use devm_platform_ioremap_resource() to simplify code.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230823132744.350618-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sunxi_sid.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/nvmem/sunxi_sid.c
-+++ b/drivers/nvmem/sunxi_sid.c
-@@ -125,7 +125,6 @@ static int sun8i_sid_read_by_reg(void *c
- static int sunxi_sid_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
--	struct resource *res;
- 	struct nvmem_config *nvmem_cfg;
- 	struct nvmem_device *nvmem;
- 	struct sunxi_sid *sid;
-@@ -142,8 +141,7 @@ static int sunxi_sid_probe(struct platfo
- 		return -EINVAL;
- 	sid->value_offset = cfg->value_offset;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	sid->base = devm_ioremap_resource(dev, res);
-+	sid->base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(sid->base))
- 		return PTR_ERR(sid->base);
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0002-nvmem-brcm_nvram-Use-devm_platform_get_and_ioremap_r.patch b/target/linux/generic/backport-6.1/814-v6.6-0002-nvmem-brcm_nvram-Use-devm_platform_get_and_ioremap_r.patch
deleted file mode 100644
index f142d735de38..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0002-nvmem-brcm_nvram-Use-devm_platform_get_and_ioremap_r.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From cfadd0e7d9225566f320bc4dc716682be910be6c Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Wed, 23 Aug 2023 14:27:25 +0100
-Subject: [PATCH] nvmem: brcm_nvram: Use
- devm_platform_get_and_ioremap_resource()
-
-Convert platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230823132744.350618-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/brcm_nvram.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -159,8 +159,7 @@ static int brcm_nvram_probe(struct platf
- 		return -ENOMEM;
- 	priv->dev = dev;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	priv->base = devm_ioremap_resource(dev, res);
-+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- 	if (IS_ERR(priv->base))
- 		return PTR_ERR(priv->base);
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0003-nvmem-lpc18xx_otp-Convert-to-devm_platform_ioremap_r.patch b/target/linux/generic/backport-6.1/814-v6.6-0003-nvmem-lpc18xx_otp-Convert-to-devm_platform_ioremap_r.patch
deleted file mode 100644
index 0395bbf8bcef..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0003-nvmem-lpc18xx_otp-Convert-to-devm_platform_ioremap_r.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 0b49178e2b6b4aac3c7fa3ce8d8c02208a13b988 Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Wed, 23 Aug 2023 14:27:26 +0100
-Subject: [PATCH] nvmem: lpc18xx_otp: Convert to
- devm_platform_ioremap_resource()
-
-Use devm_platform_ioremap_resource() to simplify code.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230823132744.350618-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/lpc18xx_otp.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/nvmem/lpc18xx_otp.c
-+++ b/drivers/nvmem/lpc18xx_otp.c
-@@ -68,14 +68,12 @@ static int lpc18xx_otp_probe(struct plat
- {
- 	struct nvmem_device *nvmem;
- 	struct lpc18xx_otp *otp;
--	struct resource *res;
- 
- 	otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL);
- 	if (!otp)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	otp->base = devm_ioremap_resource(&pdev->dev, res);
-+	otp->base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(otp->base))
- 		return PTR_ERR(otp->base);
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0004-nvmem-meson-mx-efuse-Convert-to-devm_platform_iorema.patch b/target/linux/generic/backport-6.1/814-v6.6-0004-nvmem-meson-mx-efuse-Convert-to-devm_platform_iorema.patch
deleted file mode 100644
index da077eb4b745..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0004-nvmem-meson-mx-efuse-Convert-to-devm_platform_iorema.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 0a223a097709b99a0ba738d6be5b4f52c04ffb64 Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Wed, 23 Aug 2023 14:27:27 +0100
-Subject: [PATCH] nvmem: meson-mx-efuse: Convert to
- devm_platform_ioremap_resource()
-
-Use devm_platform_ioremap_resource() to simplify code.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230823132744.350618-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/meson-mx-efuse.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/nvmem/meson-mx-efuse.c
-+++ b/drivers/nvmem/meson-mx-efuse.c
-@@ -194,7 +194,6 @@ static int meson_mx_efuse_probe(struct p
- {
- 	const struct meson_mx_efuse_platform_data *drvdata;
- 	struct meson_mx_efuse *efuse;
--	struct resource *res;
- 
- 	drvdata = of_device_get_match_data(&pdev->dev);
- 	if (!drvdata)
-@@ -204,8 +203,7 @@ static int meson_mx_efuse_probe(struct p
- 	if (!efuse)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	efuse->base = devm_ioremap_resource(&pdev->dev, res);
-+	efuse->base = devm_platform_ioremap_resource(pdev, 0);
- 	if (IS_ERR(efuse->base))
- 		return PTR_ERR(efuse->base);
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0005-nvmem-rockchip-efuse-Use-devm_platform_get_and_iorem.patch b/target/linux/generic/backport-6.1/814-v6.6-0005-nvmem-rockchip-efuse-Use-devm_platform_get_and_iorem.patch
deleted file mode 100644
index dc144ddfbdfa..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0005-nvmem-rockchip-efuse-Use-devm_platform_get_and_iorem.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 94904db28db49ac8fbb2a273d25156db26a3a985 Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Wed, 23 Aug 2023 14:27:28 +0100
-Subject: [PATCH] nvmem: rockchip-efuse: Use
- devm_platform_get_and_ioremap_resource()
-
-Convert platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230823132744.350618-7-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rockchip-efuse.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/nvmem/rockchip-efuse.c
-+++ b/drivers/nvmem/rockchip-efuse.c
-@@ -267,8 +267,7 @@ static int rockchip_efuse_probe(struct p
- 	if (!efuse)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	efuse->base = devm_ioremap_resource(dev, res);
-+	efuse->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- 	if (IS_ERR(efuse->base))
- 		return PTR_ERR(efuse->base);
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0006-nvmem-stm32-romem-Use-devm_platform_get_and_ioremap_.patch b/target/linux/generic/backport-6.1/814-v6.6-0006-nvmem-stm32-romem-Use-devm_platform_get_and_ioremap_.patch
deleted file mode 100644
index 99e20939ccf0..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0006-nvmem-stm32-romem-Use-devm_platform_get_and_ioremap_.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 0a4a8c0d238fec1fa4b85591524ef42ad261cb97 Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Wed, 23 Aug 2023 14:27:29 +0100
-Subject: [PATCH] nvmem: stm32-romem: Use
- devm_platform_get_and_ioremap_resource()
-
-Convert platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230823132744.350618-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -196,8 +196,7 @@ static int stm32_romem_probe(struct plat
- 	if (!priv)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	priv->base = devm_ioremap_resource(dev, res);
-+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- 	if (IS_ERR(priv->base))
- 		return PTR_ERR(priv->base);
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0007-nvmem-qfprom-do-some-cleanup.patch b/target/linux/generic/backport-6.1/814-v6.6-0007-nvmem-qfprom-do-some-cleanup.patch
deleted file mode 100644
index 6d93752e2717..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0007-nvmem-qfprom-do-some-cleanup.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 0bc0d6dc2a9a05ae6729b4622f09782d9f230815 Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Wed, 23 Aug 2023 14:27:30 +0100
-Subject: [PATCH] nvmem: qfprom: do some cleanup
-
-Use devm_platform_ioremap_resource() and
-devm_platform_get_and_ioremap_resource() to simplify code.
-BTW convert to use dev_err_probe() instead of open it.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230823132744.350618-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 17 +++++------------
- 1 file changed, 5 insertions(+), 12 deletions(-)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -374,8 +374,7 @@ static int qfprom_probe(struct platform_
- 		return -ENOMEM;
- 
- 	/* The corrected section is always provided */
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	priv->qfpcorrected = devm_ioremap_resource(dev, res);
-+	priv->qfpcorrected = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- 	if (IS_ERR(priv->qfpcorrected))
- 		return PTR_ERR(priv->qfpcorrected);
- 
-@@ -402,12 +401,10 @@ static int qfprom_probe(struct platform_
- 		priv->qfpraw = devm_ioremap_resource(dev, res);
- 		if (IS_ERR(priv->qfpraw))
- 			return PTR_ERR(priv->qfpraw);
--		res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
--		priv->qfpconf = devm_ioremap_resource(dev, res);
-+		priv->qfpconf = devm_platform_ioremap_resource(pdev, 2);
- 		if (IS_ERR(priv->qfpconf))
- 			return PTR_ERR(priv->qfpconf);
--		res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
--		priv->qfpsecurity = devm_ioremap_resource(dev, res);
-+		priv->qfpsecurity = devm_platform_ioremap_resource(pdev, 3);
- 		if (IS_ERR(priv->qfpsecurity))
- 			return PTR_ERR(priv->qfpsecurity);
- 
-@@ -427,12 +424,8 @@ static int qfprom_probe(struct platform_
- 			return PTR_ERR(priv->vcc);
- 
- 		priv->secclk = devm_clk_get(dev, "core");
--		if (IS_ERR(priv->secclk)) {
--			ret = PTR_ERR(priv->secclk);
--			if (ret != -EPROBE_DEFER)
--				dev_err(dev, "Error getting clock: %d\n", ret);
--			return ret;
--		}
-+		if (IS_ERR(priv->secclk))
-+			return dev_err_probe(dev, PTR_ERR(priv->secclk), "Error getting clock\n");
- 
- 		/* Only enable writing if we have SoC data. */
- 		if (priv->soc_data)
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0008-nvmem-uniphier-Use-devm_platform_get_and_ioremap_res.patch b/target/linux/generic/backport-6.1/814-v6.6-0008-nvmem-uniphier-Use-devm_platform_get_and_ioremap_res.patch
deleted file mode 100644
index 3e328a4c9991..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0008-nvmem-uniphier-Use-devm_platform_get_and_ioremap_res.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 6ac41c556e22a0d7d267c9b9d48681d73af4b368 Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Wed, 23 Aug 2023 14:27:31 +0100
-Subject: [PATCH] nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
-
-Convert platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230823132744.350618-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/uniphier-efuse.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/nvmem/uniphier-efuse.c
-+++ b/drivers/nvmem/uniphier-efuse.c
-@@ -41,8 +41,7 @@ static int uniphier_efuse_probe(struct p
- 	if (!priv)
- 		return -ENOMEM;
- 
--	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--	priv->base = devm_ioremap_resource(dev, res);
-+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
- 	if (IS_ERR(priv->base))
- 		return PTR_ERR(priv->base);
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0009-nvmem-add-new-NXP-QorIQ-eFuse-driver.patch b/target/linux/generic/backport-6.1/814-v6.6-0009-nvmem-add-new-NXP-QorIQ-eFuse-driver.patch
deleted file mode 100644
index acbe18e27000..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0009-nvmem-add-new-NXP-QorIQ-eFuse-driver.patch
+++ /dev/null
@@ -1,133 +0,0 @@
-From c8efcf7a86ebf2ff48584d270b3070a7075bc345 Mon Sep 17 00:00:00 2001
-From: Richard Alpe <richard@bit42.se>
-Date: Mon, 10 Apr 2023 10:20:51 +0200
-Subject: [PATCH] nvmem: add new NXP QorIQ eFuse driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add SFP (Security Fuse Processor) read support for NXP (Freescale)
-QorIQ series SOC's.
-
-This patch adds support for the T1023 SOC using the SFP offset from
-the existing T1023 device tree. In theory this should also work for
-T1024, T1014 and T1013 which uses the same SFP base offset.
-
-Signed-off-by: Richard Alpe <richard@bit42.se>
-Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/nvmem/Kconfig       | 12 ++++++
- drivers/nvmem/Makefile      |  2 +
- drivers/nvmem/qoriq-efuse.c | 78 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 92 insertions(+)
- create mode 100644 drivers/nvmem/qoriq-efuse.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -392,4 +392,16 @@ config NVMEM_ZYNQMP
- 
- 	  If sure, say yes. If unsure, say no.
- 
-+config NVMEM_QORIQ_EFUSE
-+	tristate "NXP QorIQ eFuse support"
-+	depends on PPC_85xx || COMPILE_TEST
-+	depends on HAS_IOMEM
-+	help
-+	  This driver provides read support for the eFuses (SFP) on NXP QorIQ
-+	  series SoC's. This includes secure boot settings, the globally unique
-+	  NXP ID 'FUIDR' and the OEM unique ID 'OUIDR'.
-+
-+	  This driver can also be built as a module. If so, the module
-+	  will be called nvmem_qoriq_efuse.
-+
- endif
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -77,3 +77,5 @@ obj-$(CONFIG_NVMEM_VF610_OCOTP)		+= nvme
- nvmem-vf610-ocotp-y			:= vf610-ocotp.o
- obj-$(CONFIG_NVMEM_ZYNQMP)		+= nvmem_zynqmp_nvmem.o
- nvmem_zynqmp_nvmem-y			:= zynqmp_nvmem.o
-+obj-$(CONFIG_NVMEM_QORIQ_EFUSE)		+= nvmem-qoriq-efuse.o
-+nvmem-qoriq-efuse-y			:= qoriq-efuse.o
---- /dev/null
-+++ b/drivers/nvmem/qoriq-efuse.c
-@@ -0,0 +1,78 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ *  Copyright (C) 2023  Westermo Network Technologies AB
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/platform_device.h>
-+
-+struct qoriq_efuse_priv {
-+	void __iomem *base;
-+};
-+
-+static int qoriq_efuse_read(void *context, unsigned int offset, void *val,
-+			    size_t bytes)
-+{
-+	struct qoriq_efuse_priv *priv = context;
-+
-+	/* .stride = 4 so offset is guaranteed to be aligned */
-+	__ioread32_copy(val, priv->base + offset, bytes / 4);
-+
-+	/* Ignore trailing bytes (there shouldn't be any) */
-+
-+	return 0;
-+}
-+
-+static int qoriq_efuse_probe(struct platform_device *pdev)
-+{
-+	struct nvmem_config config = {
-+		.dev = &pdev->dev,
-+		.read_only = true,
-+		.reg_read = qoriq_efuse_read,
-+		.stride = sizeof(u32),
-+		.word_size = sizeof(u32),
-+		.name = "qoriq_efuse_read",
-+		.id = NVMEM_DEVID_AUTO,
-+		.root_only = true,
-+	};
-+	struct qoriq_efuse_priv *priv;
-+	struct nvmem_device *nvmem;
-+	struct resource *res;
-+
-+	priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
-+	if (IS_ERR(priv->base))
-+		return PTR_ERR(priv->base);
-+
-+	config.size = resource_size(res);
-+	config.priv = priv;
-+	nvmem = devm_nvmem_register(config.dev, &config);
-+
-+	return PTR_ERR_OR_ZERO(nvmem);
-+}
-+
-+static const struct of_device_id qoriq_efuse_of_match[] = {
-+	{ .compatible = "fsl,t1023-sfp", },
-+	{/* sentinel */},
-+};
-+MODULE_DEVICE_TABLE(of, qoriq_efuse_of_match);
-+
-+static struct platform_driver qoriq_efuse_driver = {
-+	.probe = qoriq_efuse_probe,
-+	.driver = {
-+		.name = "qoriq-efuse",
-+		.of_match_table = qoriq_efuse_of_match,
-+	},
-+};
-+module_platform_driver(qoriq_efuse_driver);
-+
-+MODULE_AUTHOR("Richard Alpe <richard.alpe@bit42.se>");
-+MODULE_DESCRIPTION("NXP QorIQ Security Fuse Processor (SFP) Reader");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0011-nvmem-Kconfig-Fix-typo-drive-driver.patch b/target/linux/generic/backport-6.1/814-v6.6-0011-nvmem-Kconfig-Fix-typo-drive-driver.patch
deleted file mode 100644
index 67f30e34a234..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0011-nvmem-Kconfig-Fix-typo-drive-driver.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 9d53d595f688c9837e88a919229cc61a165c7b9e Mon Sep 17 00:00:00 2001
-From: Diederik de Haas <didi.debian@cknow.org>
-Date: Mon, 24 Jul 2023 13:36:22 +0200
-Subject: [PATCH] nvmem: Kconfig: Fix typo "drive" -> "driver"
-
-Fix typo where "driver" was meant instead of "drive".
-While at it, also capitalize "OTP".
-
-Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
-Reviewed-by: Heiko Stuebner <heiko@sntech.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/nvmem/Kconfig | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -247,7 +247,7 @@ config NVMEM_ROCKCHIP_EFUSE
- 	depends on ARCH_ROCKCHIP || COMPILE_TEST
- 	depends on HAS_IOMEM
- 	help
--	  This is a simple drive to dump specified values of Rockchip SoC
-+	  This is a simple driver to dump specified values of Rockchip SoC
- 	  from eFuse, such as cpu-leakage.
- 
- 	  This driver can also be built as a module. If so, the module
-@@ -258,8 +258,8 @@ config NVMEM_ROCKCHIP_OTP
- 	depends on ARCH_ROCKCHIP || COMPILE_TEST
- 	depends on HAS_IOMEM
- 	help
--	  This is a simple drive to dump specified values of Rockchip SoC
--	  from otp, such as cpu-leakage.
-+	  This is a simple driver to dump specified values of Rockchip SoC
-+	  from OTP, such as cpu-leakage.
- 
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem_rockchip_otp.
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0012-nvmem-sec-qfprom-Add-Qualcomm-secure-QFPROM-support.patch b/target/linux/generic/backport-6.1/814-v6.6-0012-nvmem-sec-qfprom-Add-Qualcomm-secure-QFPROM-support.patch
deleted file mode 100644
index af4a2926dc27..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0012-nvmem-sec-qfprom-Add-Qualcomm-secure-QFPROM-support.patch
+++ /dev/null
@@ -1,152 +0,0 @@
-From 0a9ec38c47c1ca4528aa058e2b9ea61901a7e632 Mon Sep 17 00:00:00 2001
-From: Komal Bajaj <quic_kbajaj@quicinc.com>
-Date: Tue, 1 Aug 2023 12:10:25 +0530
-Subject: [PATCH] nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
-
-For some of the Qualcomm SoC's, it is possible that
-some of the fuse regions or entire qfprom region is
-protected from non-secure access. In such situations,
-the OS will have to use secure calls to read the region.
-With that motivation, add secure qfprom driver.
-
-Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/nvmem/Kconfig      | 13 ++++++
- drivers/nvmem/Makefile     |  2 +
- drivers/nvmem/sec-qfprom.c | 96 ++++++++++++++++++++++++++++++++++++++
- 3 files changed, 111 insertions(+)
- create mode 100644 drivers/nvmem/sec-qfprom.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -226,6 +226,19 @@ config NVMEM_QCOM_QFPROM
- 	  This driver can also be built as a module. If so, the module
- 	  will be called nvmem_qfprom.
- 
-+config NVMEM_QCOM_SEC_QFPROM
-+        tristate "QCOM SECURE QFPROM Support"
-+        depends on ARCH_QCOM || COMPILE_TEST
-+        depends on HAS_IOMEM
-+        depends on OF
-+        select QCOM_SCM
-+        help
-+          Say y here to enable secure QFPROM support. The secure QFPROM provides access
-+          functions for QFPROM data to rest of the drivers via nvmem interface.
-+
-+          This driver can also be built as a module. If so, the module will be called
-+          nvmem_sec_qfprom.
-+
- config NVMEM_RAVE_SP_EEPROM
- 	tristate "Rave SP EEPROM Support"
- 	depends on RAVE_SP_CORE
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -46,6 +46,8 @@ obj-$(CONFIG_NVMEM_NINTENDO_OTP)	+= nvme
- nvmem-nintendo-otp-y			:= nintendo-otp.o
- obj-$(CONFIG_NVMEM_QCOM_QFPROM)		+= nvmem_qfprom.o
- nvmem_qfprom-y				:= qfprom.o
-+obj-$(CONFIG_NVMEM_QCOM_SEC_QFPROM)	+= nvmem_sec_qfprom.o
-+nvmem_sec_qfprom-y			:= sec-qfprom.o
- obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM)	+= nvmem-rave-sp-eeprom.o
- nvmem-rave-sp-eeprom-y			:= rave-sp-eeprom.o
- obj-$(CONFIG_NVMEM_RMEM) 		+= nvmem-rmem.o
---- /dev/null
-+++ b/drivers/nvmem/sec-qfprom.c
-@@ -0,0 +1,96 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
-+ */
-+
-+#include <linux/qcom_scm.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_runtime.h>
-+
-+/**
-+ * struct sec_qfprom - structure holding secure qfprom attributes
-+ *
-+ * @base: starting physical address for secure qfprom corrected address space.
-+ * @dev: qfprom device structure.
-+ */
-+struct sec_qfprom {
-+	phys_addr_t base;
-+	struct device *dev;
-+};
-+
-+static int sec_qfprom_reg_read(void *context, unsigned int reg, void *_val, size_t bytes)
-+{
-+	struct sec_qfprom *priv = context;
-+	unsigned int i;
-+	u8 *val = _val;
-+	u32 read_val;
-+	u8 *tmp;
-+
-+	for (i = 0; i < bytes; i++, reg++) {
-+		if (i == 0 || reg % 4 == 0) {
-+			if (qcom_scm_io_readl(priv->base + (reg & ~3), &read_val)) {
-+				dev_err(priv->dev, "Couldn't access fuse register\n");
-+				return -EINVAL;
-+			}
-+			tmp = (u8 *)&read_val;
-+		}
-+
-+		val[i] = tmp[reg & 3];
-+	}
-+
-+	return 0;
-+}
-+
-+static int sec_qfprom_probe(struct platform_device *pdev)
-+{
-+	struct nvmem_config econfig = {
-+		.name = "sec-qfprom",
-+		.stride = 1,
-+		.word_size = 1,
-+		.id = NVMEM_DEVID_AUTO,
-+		.reg_read = sec_qfprom_reg_read,
-+	};
-+	struct device *dev = &pdev->dev;
-+	struct nvmem_device *nvmem;
-+	struct sec_qfprom *priv;
-+	struct resource *res;
-+
-+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+	if (!priv)
-+		return -ENOMEM;
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res)
-+		return -EINVAL;
-+
-+	priv->base = res->start;
-+
-+	econfig.size = resource_size(res);
-+	econfig.dev = dev;
-+	econfig.priv = priv;
-+
-+	priv->dev = dev;
-+
-+	nvmem = devm_nvmem_register(dev, &econfig);
-+
-+	return PTR_ERR_OR_ZERO(nvmem);
-+}
-+
-+static const struct of_device_id sec_qfprom_of_match[] = {
-+	{ .compatible = "qcom,sec-qfprom" },
-+	{/* sentinel */},
-+};
-+MODULE_DEVICE_TABLE(of, sec_qfprom_of_match);
-+
-+static struct platform_driver qfprom_driver = {
-+	.probe = sec_qfprom_probe,
-+	.driver = {
-+		.name = "qcom_sec_qfprom",
-+		.of_match_table = sec_qfprom_of_match,
-+	},
-+};
-+module_platform_driver(qfprom_driver);
-+MODULE_DESCRIPTION("Qualcomm Secure QFPROM driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0013-nvmem-u-boot-env-Replace-zero-length-array-with-DECL.patch b/target/linux/generic/backport-6.1/814-v6.6-0013-nvmem-u-boot-env-Replace-zero-length-array-with-DECL.patch
deleted file mode 100644
index dab8ec2c241d..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0013-nvmem-u-boot-env-Replace-zero-length-array-with-DECL.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From c32f2186acc9abb4d766361255d7ddf07d15eeb2 Mon Sep 17 00:00:00 2001
-From: Atul Raut <rauji.raut@gmail.com>
-Date: Sun, 30 Jul 2023 15:39:15 -0700
-Subject: [PATCH] nvmem: u-boot-env:: Replace zero-length array with
- DECLARE_FLEX_ARRAY() helper
-
-We are moving toward replacing zero-length arrays with C99 flexible-array
-members since they are deprecated. Therefore, the new DECLARE_FLEX_ARRAY()
-helper macro should be used to replace the zero-length array declaration.
-
-This fixes warnings such as:
-./drivers/nvmem/u-boot-env.c:50:9-13: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
-
-Signed-off-by: Atul Raut <rauji.raut@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/nvmem/u-boot-env.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -47,7 +47,7 @@ struct u_boot_env_image_broadcom {
- 	__le32 magic;
- 	__le32 len;
- 	__le32 crc32;
--	uint8_t data[0];
-+	DECLARE_FLEX_ARRAY(uint8_t, data);
- } __packed;
- 
- static int u_boot_env_read(void *context, unsigned int offset, void *val,
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0014-nvmem-core-Create-all-cells-before-adding-the-nvmem-.patch b/target/linux/generic/backport-6.1/814-v6.6-0014-nvmem-core-Create-all-cells-before-adding-the-nvmem-.patch
deleted file mode 100644
index 990ce8ecf1c7..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0014-nvmem-core-Create-all-cells-before-adding-the-nvmem-.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 104af6a5b199eb4dc7970d1304aef38ac5a6ed54 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 8 Aug 2023 08:29:26 +0200
-Subject: [PATCH] nvmem: core: Create all cells before adding the nvmem device
-
-Let's pack all the cells creation in one place, so they are all created
-before we add the nvmem device.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/nvmem/core.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -997,17 +997,17 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_cells;
- 
--	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
--
--	rval = device_add(&nvmem->dev);
-+	rval = nvmem_add_cells_from_fixed_layout(nvmem);
- 	if (rval)
- 		goto err_remove_cells;
- 
--	rval = nvmem_add_cells_from_fixed_layout(nvmem);
-+	rval = nvmem_add_cells_from_layout(nvmem);
- 	if (rval)
- 		goto err_remove_cells;
- 
--	rval = nvmem_add_cells_from_layout(nvmem);
-+	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
-+
-+	rval = device_add(&nvmem->dev);
- 	if (rval)
- 		goto err_remove_cells;
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0015-nvmem-core-Return-NULL-when-no-nvmem-layout-is-found.patch b/target/linux/generic/backport-6.1/814-v6.6-0015-nvmem-core-Return-NULL-when-no-nvmem-layout-is-found.patch
deleted file mode 100644
index 8f64d0c28b85..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0015-nvmem-core-Return-NULL-when-no-nvmem-layout-is-found.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 6c7f48ea2e663b679aa8e60d8d8e1e6306a644f9 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 8 Aug 2023 08:29:27 +0200
-Subject: [PATCH] nvmem: core: Return NULL when no nvmem layout is found
-
-Currently, of_nvmem_layout_get_container() returns NULL on error, or an
-error pointer if either CONFIG_NVMEM or CONFIG_OF is turned off. We
-should likely avoid this kind of mix for two reasons: to clarify the
-intend and anyway fix the !CONFIG_OF which will likely always if we use
-this helper somewhere else. Let's just return NULL when no layout is
-found, we don't need an error value here.
-
-Link: https://staticthinking.wordpress.com/2022/08/01/mixing-error-pointers-and-null/
-Fixes: 266570f496b9 ("nvmem: core: introduce NVMEM layouts")
-Reported-by: kernel test robot <lkp@intel.com>
-Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
-Closes: https://lore.kernel.org/r/202308030002.DnSFOrMB-lkp@intel.com/
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- include/linux/nvmem-consumer.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -256,7 +256,7 @@ static inline struct nvmem_device *of_nv
- static inline struct device_node *
- of_nvmem_layout_get_container(struct nvmem_device *nvmem)
- {
--	return ERR_PTR(-EOPNOTSUPP);
-+	return NULL;
- }
- #endif /* CONFIG_NVMEM && CONFIG_OF */
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0016-nvmem-core-Do-not-open-code-existing-functions.patch b/target/linux/generic/backport-6.1/814-v6.6-0016-nvmem-core-Do-not-open-code-existing-functions.patch
deleted file mode 100644
index 4ebf229695d2..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0016-nvmem-core-Do-not-open-code-existing-functions.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From b8257f61b4ddac6d7d0e19a5a4e8b07afb3b4ed3 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 8 Aug 2023 08:29:28 +0200
-Subject: [PATCH] nvmem: core: Do not open-code existing functions
-
-Use of_nvmem_layout_get_container() instead of hardcoding it.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Michael Walle <michael@walle.cc>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/nvmem/core.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -785,10 +785,10 @@ EXPORT_SYMBOL_GPL(nvmem_layout_unregiste
- 
- static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem)
- {
--	struct device_node *layout_np, *np = nvmem->dev.of_node;
-+	struct device_node *layout_np;
- 	struct nvmem_layout *l, *layout = ERR_PTR(-EPROBE_DEFER);
- 
--	layout_np = of_get_child_by_name(np, "nvmem-layout");
-+	layout_np = of_nvmem_layout_get_container(nvmem);
- 	if (!layout_np)
- 		return NULL;
- 
diff --git a/target/linux/generic/backport-6.1/814-v6.6-0017-nvmem-core-Notify-when-a-new-layout-is-registered.patch b/target/linux/generic/backport-6.1/814-v6.6-0017-nvmem-core-Notify-when-a-new-layout-is-registered.patch
deleted file mode 100644
index 6803397d60b7..000000000000
--- a/target/linux/generic/backport-6.1/814-v6.6-0017-nvmem-core-Notify-when-a-new-layout-is-registered.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 0991afbe4b1805e7f0113ef10d7c5f0698a739e4 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 8 Aug 2023 08:29:29 +0200
-Subject: [PATCH] nvmem: core: Notify when a new layout is registered
-
-Tell listeners a new layout was introduced and is now available.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
- drivers/nvmem/core.c           | 4 ++++
- include/linux/nvmem-consumer.h | 2 ++
- 2 files changed, 6 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -771,12 +771,16 @@ int __nvmem_layout_register(struct nvmem
- 	list_add(&layout->node, &nvmem_layouts);
- 	spin_unlock(&nvmem_layout_lock);
- 
-+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_LAYOUT_ADD, layout);
-+
- 	return 0;
- }
- EXPORT_SYMBOL_GPL(__nvmem_layout_register);
- 
- void nvmem_layout_unregister(struct nvmem_layout *layout)
- {
-+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_LAYOUT_REMOVE, layout);
-+
- 	spin_lock(&nvmem_layout_lock);
- 	list_del(&layout->node);
- 	spin_unlock(&nvmem_layout_lock);
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -43,6 +43,8 @@ enum {
- 	NVMEM_REMOVE,
- 	NVMEM_CELL_ADD,
- 	NVMEM_CELL_REMOVE,
-+	NVMEM_LAYOUT_ADD,
-+	NVMEM_LAYOUT_REMOVE,
- };
- 
- #if IS_ENABLED(CONFIG_NVMEM)
diff --git a/target/linux/generic/backport-6.1/815-v6.6-1-leds-turris-omnia-Use-sysfs_emit-instead-of-sprintf.patch b/target/linux/generic/backport-6.1/815-v6.6-1-leds-turris-omnia-Use-sysfs_emit-instead-of-sprintf.patch
deleted file mode 100644
index e17be439b24d..000000000000
--- a/target/linux/generic/backport-6.1/815-v6.6-1-leds-turris-omnia-Use-sysfs_emit-instead-of-sprintf.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From a75b58a46423cfd9b1f73581f4bd2ac2ae743996 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Wed, 2 Aug 2023 18:07:45 +0200
-Subject: [PATCH 1/6] leds: turris-omnia: Use sysfs_emit() instead of sprintf()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use the dedicated sysfs_emit() function instead of sprintf() in sysfs
-attribute accessor brightness_show().
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Link: https://lore.kernel.org/r/20230802160748.11208-4-kabel@kernel.org
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/leds/leds-turris-omnia.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/leds/leds-turris-omnia.c
-+++ b/drivers/leds/leds-turris-omnia.c
-@@ -194,7 +194,7 @@ static ssize_t brightness_show(struct de
- 	if (ret < 0)
- 		return ret;
- 
--	return sprintf(buf, "%d\n", ret);
-+	return sysfs_emit(buf, "%d\n", ret);
- }
- 
- static ssize_t brightness_store(struct device *dev, struct device_attribute *a,
diff --git a/target/linux/generic/backport-6.1/815-v6.7-2-leds-turris-omnia-Make-set_brightness-more-efficient.patch b/target/linux/generic/backport-6.1/815-v6.7-2-leds-turris-omnia-Make-set_brightness-more-efficient.patch
deleted file mode 100644
index d84ad6712591..000000000000
--- a/target/linux/generic/backport-6.1/815-v6.7-2-leds-turris-omnia-Make-set_brightness-more-efficient.patch
+++ /dev/null
@@ -1,207 +0,0 @@
-From a64c3c1357275b1fd61bc9734f638cdb5d8a8bbb Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 18 Sep 2023 18:11:02 +0200
-Subject: [PATCH 4/6] leds: turris-omnia: Make set_brightness() more efficient
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Implement caching of the LED color and state values that are sent to MCU
-in order to make the set_brightness() operation more efficient by
-avoiding I2C transactions which are not needed.
-
-On Turris Omnia's MCU, which acts as the RGB LED controller, each LED
-has a RGB color, and a ON/OFF state, which are configurable via I2C
-commands CMD_LED_COLOR and CMD_LED_STATE.
-
-The CMD_LED_COLOR command sends 5 bytes and the CMD_LED_STATE command 2
-bytes over the I2C bus, which operates at 100 kHz. With I2C overhead
-this allows ~1670 color changing commands and ~3200 state changing
-commands per second (or around 1000 color + state changes per second).
-This may seem more than enough, but the issue is that the I2C bus is
-shared with another peripheral, the MCU. The MCU exposes an interrupt
-interface, and it can trigger hundreds of interrupts per second. Each
-time, we need to read the interrupt state register over this I2C bus.
-Whenever we are sending a LED color/state changing command, the
-interrupt reading is waiting.
-
-Currently, every time LED brightness or LED multi intensity is changed,
-we send a CMD_LED_STATE command, and if the computed color (brightness
-adjusted multi_intensity) is non-zero, we also send a CMD_LED_COLOR
-command.
-
-Consider for example the situation when we have a netdev trigger enabled
-for a LED. The netdev trigger does not change the LED color, only the
-brightness (either to 0 or to currently configured brightness), and so
-there is no need to send the CMD_LED_COLOR command. But each change of
-brightness to 0 sends one CMD_LED_STATE command, and each change of
-brightness to max_brightness sends one CMD_LED_STATE command and one
-CMD_LED_COLOR command:
-    set_brightness(0)   ->  CMD_LED_STATE
-    set_brightness(255) ->  CMD_LED_STATE + CMD_LED_COLOR
-                                            (unnecessary)
-
-We can avoid the unnecessary I2C transactions if we cache the values of
-state and color that are sent to the controller. If the color does not
-change from the one previously sent, there is no need to do the
-CMD_LED_COLOR I2C transaction, and if the state does not change, there
-is no need to do the CMD_LED_STATE transaction.
-
-Because we need to make sure that our cached values are consistent with
-the controller state, add explicit setting of the LED color to white at
-probe time (this is the default setting when MCU resets, but does not
-necessarily need to be the case, for example if U-Boot played with the
-LED colors).
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Link: https://lore.kernel.org/r/20230918161104.20860-3-kabel@kernel.org
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/leds/leds-turris-omnia.c | 96 ++++++++++++++++++++++++++------
- 1 file changed, 78 insertions(+), 18 deletions(-)
-
---- a/drivers/leds/leds-turris-omnia.c
-+++ b/drivers/leds/leds-turris-omnia.c
-@@ -30,6 +30,8 @@
- struct omnia_led {
- 	struct led_classdev_mc mc_cdev;
- 	struct mc_subled subled_info[OMNIA_LED_NUM_CHANNELS];
-+	u8 cached_channels[OMNIA_LED_NUM_CHANNELS];
-+	bool on;
- 	int reg;
- };
- 
-@@ -72,36 +74,82 @@ static int omnia_cmd_read_u8(const struc
- 		return -EIO;
- }
- 
-+static int omnia_led_send_color_cmd(const struct i2c_client *client,
-+				    struct omnia_led *led)
-+{
-+	char cmd[5];
-+	int ret;
-+
-+	cmd[0] = CMD_LED_COLOR;
-+	cmd[1] = led->reg;
-+	cmd[2] = led->subled_info[0].brightness;
-+	cmd[3] = led->subled_info[1].brightness;
-+	cmd[4] = led->subled_info[2].brightness;
-+
-+	/* Send the color change command */
-+	ret = i2c_master_send(client, cmd, 5);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Cache the RGB channel brightnesses */
-+	for (int i = 0; i < OMNIA_LED_NUM_CHANNELS; ++i)
-+		led->cached_channels[i] = led->subled_info[i].brightness;
-+
-+	return 0;
-+}
-+
-+/* Determine if the computed RGB channels are different from the cached ones */
-+static bool omnia_led_channels_changed(struct omnia_led *led)
-+{
-+	for (int i = 0; i < OMNIA_LED_NUM_CHANNELS; ++i)
-+		if (led->subled_info[i].brightness != led->cached_channels[i])
-+			return true;
-+
-+	return false;
-+}
-+
- static int omnia_led_brightness_set_blocking(struct led_classdev *cdev,
- 					     enum led_brightness brightness)
- {
- 	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
- 	struct omnia_leds *leds = dev_get_drvdata(cdev->dev->parent);
- 	struct omnia_led *led = to_omnia_led(mc_cdev);
--	u8 buf[5], state;
--	int ret;
-+	int err = 0;
- 
- 	mutex_lock(&leds->lock);
- 
--	led_mc_calc_color_components(&led->mc_cdev, brightness);
-+	/*
-+	 * Only recalculate RGB brightnesses from intensities if brightness is
-+	 * non-zero. Otherwise we won't be using them and we can save ourselves
-+	 * some software divisions (Omnia's CPU does not implement the division
-+	 * instruction).
-+	 */
-+	if (brightness) {
-+		led_mc_calc_color_components(mc_cdev, brightness);
-+
-+		/*
-+		 * Send color command only if brightness is non-zero and the RGB
-+		 * channel brightnesses changed.
-+		 */
-+		if (omnia_led_channels_changed(led))
-+			err = omnia_led_send_color_cmd(leds->client, led);
-+	}
- 
--	buf[0] = CMD_LED_COLOR;
--	buf[1] = led->reg;
--	buf[2] = mc_cdev->subled_info[0].brightness;
--	buf[3] = mc_cdev->subled_info[1].brightness;
--	buf[4] = mc_cdev->subled_info[2].brightness;
--
--	state = CMD_LED_STATE_LED(led->reg);
--	if (buf[2] || buf[3] || buf[4])
--		state |= CMD_LED_STATE_ON;
--
--	ret = omnia_cmd_write_u8(leds->client, CMD_LED_STATE, state);
--	if (ret >= 0 && (state & CMD_LED_STATE_ON))
--		ret = i2c_master_send(leds->client, buf, 5);
-+	/* Send on/off state change only if (bool)brightness changed */
-+	if (!err && !brightness != !led->on) {
-+		u8 state = CMD_LED_STATE_LED(led->reg);
-+
-+		if (brightness)
-+			state |= CMD_LED_STATE_ON;
-+
-+		err = omnia_cmd_write_u8(leds->client, CMD_LED_STATE, state);
-+		if (!err)
-+			led->on = !!brightness;
-+	}
- 
- 	mutex_unlock(&leds->lock);
- 
--	return ret;
-+	return err;
- }
- 
- static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
-@@ -129,11 +177,15 @@ static int omnia_led_register(struct i2c
- 	}
- 
- 	led->subled_info[0].color_index = LED_COLOR_ID_RED;
--	led->subled_info[0].channel = 0;
- 	led->subled_info[1].color_index = LED_COLOR_ID_GREEN;
--	led->subled_info[1].channel = 1;
- 	led->subled_info[2].color_index = LED_COLOR_ID_BLUE;
--	led->subled_info[2].channel = 2;
-+
-+	/* Initial color is white */
-+	for (int i = 0; i < OMNIA_LED_NUM_CHANNELS; ++i) {
-+		led->subled_info[i].intensity = 255;
-+		led->subled_info[i].brightness = 255;
-+		led->subled_info[i].channel = i;
-+	}
- 
- 	led->mc_cdev.subled_info = led->subled_info;
- 	led->mc_cdev.num_colors = OMNIA_LED_NUM_CHANNELS;
-@@ -162,6 +214,14 @@ static int omnia_led_register(struct i2c
- 		return ret;
- 	}
- 
-+	/* Set initial color and cache it */
-+	ret = omnia_led_send_color_cmd(client, led);
-+	if (ret < 0) {
-+		dev_err(dev, "Cannot set LED %pOF initial color: %i\n", np,
-+			ret);
-+		return ret;
-+	}
-+
- 	ret = devm_led_classdev_multicolor_register_ext(dev, &led->mc_cdev,
- 							&init_data);
- 	if (ret < 0) {
diff --git a/target/linux/generic/backport-6.1/815-v6.7-3-leds-turris-omnia-Support-HW-controlled-mode-via-pri.patch b/target/linux/generic/backport-6.1/815-v6.7-3-leds-turris-omnia-Support-HW-controlled-mode-via-pri.patch
deleted file mode 100644
index 00773ab0f632..000000000000
--- a/target/linux/generic/backport-6.1/815-v6.7-3-leds-turris-omnia-Support-HW-controlled-mode-via-pri.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From e965e0f6de60874fc0a0caed9a9e0122999e0c7b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 18 Sep 2023 18:11:03 +0200
-Subject: [PATCH 5/6] leds: turris-omnia: Support HW controlled mode via
- private trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add support for enabling MCU controlled mode of the Turris Omnia LEDs
-via a LED private trigger called "omnia-mcu". Recall that private LED
-triggers will only be listed in the sysfs trigger file for LEDs that
-support them (currently there is no user of this mechanism).
-
-When in MCU controlled mode, the user can still set LED color, but the
-blinking is done by MCU, which does different things for different LEDs:
-- WAN LED is blinked according to the LED[0] pin of the WAN PHY
-- LAN LEDs are blinked according to the LED[0] output of the
-  corresponding port of the LAN switch
-- PCIe LEDs are blinked according to the logical OR of the MiniPCIe port
-  LED pins
-
-In the future I want to make the netdev trigger to transparently offload
-the blinking to the HW if user sets compatible settings for the netdev
-trigger (for LEDs associated with network devices).
-There was some work on this already, and hopefully we will be able to
-complete it sometime, but for now there are still multiple blockers for
-this, and even if there weren't, we still would not be able to configure
-HW controlled mode for the LEDs associated with MiniPCIe ports.
-
-In the meantime let's support HW controlled mode via the private LED
-trigger mechanism. If, in the future, we manage to complete the netdev
-trigger offloading, we can still keep this private trigger for backwards
-compatibility, if needed.
-
-We also set "omnia-mcu" to cdev->default_trigger, so that the MCU keeps
-control until the user first wants to take over it. If a different
-default trigger is specified in device-tree via the
-'linux,default-trigger' property, LED class will overwrite
-cdev->default_trigger, and so the DT property will be respected.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Link: https://lore.kernel.org/r/20230918161104.20860-4-kabel@kernel.org
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/leds/Kconfig             |  1 +
- drivers/leds/leds-turris-omnia.c | 98 +++++++++++++++++++++++++++++---
- 2 files changed, 91 insertions(+), 8 deletions(-)
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -164,6 +164,7 @@ config LEDS_TURRIS_OMNIA
- 	depends on I2C
- 	depends on MACH_ARMADA_38X || COMPILE_TEST
- 	depends on OF
-+	select LEDS_TRIGGERS
- 	help
- 	  This option enables basic support for the LEDs found on the front
- 	  side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
---- a/drivers/leds/leds-turris-omnia.c
-+++ b/drivers/leds/leds-turris-omnia.c
-@@ -31,7 +31,7 @@ struct omnia_led {
- 	struct led_classdev_mc mc_cdev;
- 	struct mc_subled subled_info[OMNIA_LED_NUM_CHANNELS];
- 	u8 cached_channels[OMNIA_LED_NUM_CHANNELS];
--	bool on;
-+	bool on, hwtrig;
- 	int reg;
- };
- 
-@@ -120,12 +120,14 @@ static int omnia_led_brightness_set_bloc
- 
- 	/*
- 	 * Only recalculate RGB brightnesses from intensities if brightness is
--	 * non-zero. Otherwise we won't be using them and we can save ourselves
--	 * some software divisions (Omnia's CPU does not implement the division
--	 * instruction).
-+	 * non-zero (if it is zero and the LED is in HW blinking mode, we use
-+	 * max_brightness as brightness). Otherwise we won't be using them and
-+	 * we can save ourselves some software divisions (Omnia's CPU does not
-+	 * implement the division instruction).
- 	 */
--	if (brightness) {
--		led_mc_calc_color_components(mc_cdev, brightness);
-+	if (brightness || led->hwtrig) {
-+		led_mc_calc_color_components(mc_cdev, brightness ?:
-+						      cdev->max_brightness);
- 
- 		/*
- 		 * Send color command only if brightness is non-zero and the RGB
-@@ -135,8 +137,11 @@ static int omnia_led_brightness_set_bloc
- 			err = omnia_led_send_color_cmd(leds->client, led);
- 	}
- 
--	/* Send on/off state change only if (bool)brightness changed */
--	if (!err && !brightness != !led->on) {
-+	/*
-+	 * Send on/off state change only if (bool)brightness changed and the LED
-+	 * is not being blinked by HW.
-+	 */
-+	if (!err && !led->hwtrig && !brightness != !led->on) {
- 		u8 state = CMD_LED_STATE_LED(led->reg);
- 
- 		if (brightness)
-@@ -152,6 +157,71 @@ static int omnia_led_brightness_set_bloc
- 	return err;
- }
- 
-+static struct led_hw_trigger_type omnia_hw_trigger_type;
-+
-+static int omnia_hwtrig_activate(struct led_classdev *cdev)
-+{
-+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
-+	struct omnia_leds *leds = dev_get_drvdata(cdev->dev->parent);
-+	struct omnia_led *led = to_omnia_led(mc_cdev);
-+	int err = 0;
-+
-+	mutex_lock(&leds->lock);
-+
-+	if (!led->on) {
-+		/*
-+		 * If the LED is off (brightness was set to 0), the last
-+		 * configured color was not necessarily sent to the MCU.
-+		 * Recompute with max_brightness and send if needed.
-+		 */
-+		led_mc_calc_color_components(mc_cdev, cdev->max_brightness);
-+
-+		if (omnia_led_channels_changed(led))
-+			err = omnia_led_send_color_cmd(leds->client, led);
-+	}
-+
-+	if (!err) {
-+		/* Put the LED into MCU controlled mode */
-+		err = omnia_cmd_write_u8(leds->client, CMD_LED_MODE,
-+					 CMD_LED_MODE_LED(led->reg));
-+		if (!err)
-+			led->hwtrig = true;
-+	}
-+
-+	mutex_unlock(&leds->lock);
-+
-+	return err;
-+}
-+
-+static void omnia_hwtrig_deactivate(struct led_classdev *cdev)
-+{
-+	struct omnia_leds *leds = dev_get_drvdata(cdev->dev->parent);
-+	struct omnia_led *led = to_omnia_led(lcdev_to_mccdev(cdev));
-+	int err;
-+
-+	mutex_lock(&leds->lock);
-+
-+	led->hwtrig = false;
-+
-+	/* Put the LED into software mode */
-+	err = omnia_cmd_write_u8(leds->client, CMD_LED_MODE,
-+				 CMD_LED_MODE_LED(led->reg) |
-+				 CMD_LED_MODE_USER);
-+
-+	mutex_unlock(&leds->lock);
-+
-+	if (err < 0)
-+		dev_err(cdev->dev, "Cannot put LED to software mode: %i\n",
-+			err);
-+}
-+
-+static struct led_trigger omnia_hw_trigger = {
-+	.name		= "omnia-mcu",
-+	.activate	= omnia_hwtrig_activate,
-+	.deactivate	= omnia_hwtrig_deactivate,
-+	.trigger_type	= &omnia_hw_trigger_type,
-+};
-+
- static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
- 			      struct device_node *np)
- {
-@@ -195,6 +265,12 @@ static int omnia_led_register(struct i2c
- 	cdev = &led->mc_cdev.led_cdev;
- 	cdev->max_brightness = 255;
- 	cdev->brightness_set_blocking = omnia_led_brightness_set_blocking;
-+	cdev->trigger_type = &omnia_hw_trigger_type;
-+	/*
-+	 * Use the omnia-mcu trigger as the default trigger. It may be rewritten
-+	 * by LED class from the linux,default-trigger property.
-+	 */
-+	cdev->default_trigger = omnia_hw_trigger.name;
- 
- 	/* put the LED into software mode */
- 	ret = omnia_cmd_write_u8(client, CMD_LED_MODE,
-@@ -309,6 +385,12 @@ static int omnia_leds_probe(struct i2c_c
- 
- 	mutex_init(&leds->lock);
- 
-+	ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
-+	if (ret < 0) {
-+		dev_err(dev, "Cannot register private LED trigger: %d\n", ret);
-+		return ret;
-+	}
-+
- 	led = &leds->leds[0];
- 	for_each_available_child_of_node(np, child) {
- 		ret = omnia_led_register(client, led, child);
diff --git a/target/linux/generic/backport-6.1/815-v6.7-4-leds-turris-omnia-Add-support-for-enabling-disabling.patch b/target/linux/generic/backport-6.1/815-v6.7-4-leds-turris-omnia-Add-support-for-enabling-disabling.patch
deleted file mode 100644
index e98397922d28..000000000000
--- a/target/linux/generic/backport-6.1/815-v6.7-4-leds-turris-omnia-Add-support-for-enabling-disabling.patch
+++ /dev/null
@@ -1,244 +0,0 @@
-From 0efb3f9609d3de5a7d8c31e3835d7eb3e6adce79 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 18 Sep 2023 18:11:04 +0200
-Subject: [PATCH 6/6] leds: turris-omnia: Add support for enabling/disabling HW
- gamma correction
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-If the MCU on Turris Omnia is running newer firmware versions, the LED
-controller supports RGB gamma correction (and enables it by default for
-newer boards).
-
-Determine whether the gamma correction setting feature is supported and
-add the ability to set it via sysfs attribute file.
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
-Link: https://lore.kernel.org/r/20230918161104.20860-5-kabel@kernel.org
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- .../sysfs-class-led-driver-turris-omnia       |  14 ++
- drivers/leds/leds-turris-omnia.c              | 137 +++++++++++++++---
- 2 files changed, 134 insertions(+), 17 deletions(-)
-
---- a/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia
-+++ b/Documentation/ABI/testing/sysfs-class-led-driver-turris-omnia
-@@ -12,3 +12,17 @@ Description:	(RW) On the front panel of
- 		able to change this setting from software.
- 
- 		Format: %i
-+
-+What:		/sys/class/leds/<led>/device/gamma_correction
-+Date:		August 2023
-+KernelVersion:	6.6
-+Contact:	Marek Behún <kabel@kernel.org>
-+Description:	(RW) Newer versions of the microcontroller firmware of the
-+		Turris Omnia router support gamma correction for the RGB LEDs.
-+		This feature can be enabled/disabled by writing to this file.
-+
-+		If the feature is not supported because the MCU firmware is too
-+		old, the file always reads as 0, and writing to the file results
-+		in the EOPNOTSUPP error.
-+
-+		Format: %i
---- a/drivers/leds/leds-turris-omnia.c
-+++ b/drivers/leds/leds-turris-omnia.c
-@@ -15,17 +15,30 @@
- #define OMNIA_BOARD_LEDS	12
- #define OMNIA_LED_NUM_CHANNELS	3
- 
--#define CMD_LED_MODE		3
--#define CMD_LED_MODE_LED(l)	((l) & 0x0f)
--#define CMD_LED_MODE_USER	0x10
--
--#define CMD_LED_STATE		4
--#define CMD_LED_STATE_LED(l)	((l) & 0x0f)
--#define CMD_LED_STATE_ON	0x10
--
--#define CMD_LED_COLOR		5
--#define CMD_LED_SET_BRIGHTNESS	7
--#define CMD_LED_GET_BRIGHTNESS	8
-+/* MCU controller commands at I2C address 0x2a */
-+#define OMNIA_MCU_I2C_ADDR		0x2a
-+
-+#define CMD_GET_STATUS_WORD		0x01
-+#define STS_FEATURES_SUPPORTED		BIT(2)
-+
-+#define CMD_GET_FEATURES		0x10
-+#define FEAT_LED_GAMMA_CORRECTION	BIT(5)
-+
-+/* LED controller commands at I2C address 0x2b */
-+#define CMD_LED_MODE			0x03
-+#define CMD_LED_MODE_LED(l)		((l) & 0x0f)
-+#define CMD_LED_MODE_USER		0x10
-+
-+#define CMD_LED_STATE			0x04
-+#define CMD_LED_STATE_LED(l)		((l) & 0x0f)
-+#define CMD_LED_STATE_ON		0x10
-+
-+#define CMD_LED_COLOR			0x05
-+#define CMD_LED_SET_BRIGHTNESS		0x07
-+#define CMD_LED_GET_BRIGHTNESS		0x08
-+
-+#define CMD_SET_GAMMA_CORRECTION	0x30
-+#define CMD_GET_GAMMA_CORRECTION	0x31
- 
- struct omnia_led {
- 	struct led_classdev_mc mc_cdev;
-@@ -40,6 +53,7 @@ struct omnia_led {
- struct omnia_leds {
- 	struct i2c_client *client;
- 	struct mutex lock;
-+	bool has_gamma_correction;
- 	struct omnia_led leds[];
- };
- 
-@@ -50,30 +64,42 @@ static int omnia_cmd_write_u8(const stru
- 	return i2c_master_send(client, buf, sizeof(buf));
- }
- 
--static int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
-+static int omnia_cmd_read_raw(struct i2c_adapter *adapter, u8 addr, u8 cmd,
-+			      void *reply, size_t len)
- {
- 	struct i2c_msg msgs[2];
--	u8 reply;
- 	int ret;
- 
--	msgs[0].addr = client->addr;
-+	msgs[0].addr = addr;
- 	msgs[0].flags = 0;
- 	msgs[0].len = 1;
- 	msgs[0].buf = &cmd;
--	msgs[1].addr = client->addr;
-+	msgs[1].addr = addr;
- 	msgs[1].flags = I2C_M_RD;
--	msgs[1].len = 1;
--	msgs[1].buf = &reply;
-+	msgs[1].len = len;
-+	msgs[1].buf = reply;
- 
--	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-+	ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
- 	if (likely(ret == ARRAY_SIZE(msgs)))
--		return reply;
-+		return len;
- 	else if (ret < 0)
- 		return ret;
- 	else
- 		return -EIO;
- }
- 
-+static int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
-+{
-+	u8 reply;
-+	int ret;
-+
-+	ret = omnia_cmd_read_raw(client->adapter, client->addr, cmd, &reply, 1);
-+	if (ret < 0)
-+		return ret;
-+
-+	return reply;
-+}
-+
- static int omnia_led_send_color_cmd(const struct i2c_client *client,
- 				    struct omnia_led *led)
- {
-@@ -352,12 +378,74 @@ static ssize_t brightness_store(struct d
- }
- static DEVICE_ATTR_RW(brightness);
- 
-+static ssize_t gamma_correction_show(struct device *dev,
-+				     struct device_attribute *a, char *buf)
-+{
-+	struct i2c_client *client = to_i2c_client(dev);
-+	struct omnia_leds *leds = i2c_get_clientdata(client);
-+	int ret;
-+
-+	if (leds->has_gamma_correction) {
-+		ret = omnia_cmd_read_u8(client, CMD_GET_GAMMA_CORRECTION);
-+		if (ret < 0)
-+			return ret;
-+	} else {
-+		ret = 0;
-+	}
-+
-+	return sysfs_emit(buf, "%d\n", !!ret);
-+}
-+
-+static ssize_t gamma_correction_store(struct device *dev,
-+				      struct device_attribute *a,
-+				      const char *buf, size_t count)
-+{
-+	struct i2c_client *client = to_i2c_client(dev);
-+	struct omnia_leds *leds = i2c_get_clientdata(client);
-+	bool val;
-+	int ret;
-+
-+	if (!leds->has_gamma_correction)
-+		return -EOPNOTSUPP;
-+
-+	if (kstrtobool(buf, &val) < 0)
-+		return -EINVAL;
-+
-+	ret = omnia_cmd_write_u8(client, CMD_SET_GAMMA_CORRECTION, val);
-+
-+	return ret < 0 ? ret : count;
-+}
-+static DEVICE_ATTR_RW(gamma_correction);
-+
- static struct attribute *omnia_led_controller_attrs[] = {
- 	&dev_attr_brightness.attr,
-+	&dev_attr_gamma_correction.attr,
- 	NULL,
- };
- ATTRIBUTE_GROUPS(omnia_led_controller);
- 
-+static int omnia_mcu_get_features(const struct i2c_client *client)
-+{
-+	u16 reply;
-+	int err;
-+
-+	err = omnia_cmd_read_raw(client->adapter, OMNIA_MCU_I2C_ADDR,
-+				 CMD_GET_STATUS_WORD, &reply, sizeof(reply));
-+	if (err < 0)
-+		return err;
-+
-+	/* Check whether MCU firmware supports the CMD_GET_FEAUTRES command */
-+	if (!(le16_to_cpu(reply) & STS_FEATURES_SUPPORTED))
-+		return 0;
-+
-+	err = omnia_cmd_read_raw(client->adapter, OMNIA_MCU_I2C_ADDR,
-+				 CMD_GET_FEATURES, &reply, sizeof(reply));
-+	if (err < 0)
-+		return err;
-+
-+	return le16_to_cpu(reply);
-+}
-+
- static int omnia_leds_probe(struct i2c_client *client,
- 			    const struct i2c_device_id *id)
- {
-@@ -383,6 +471,21 @@ static int omnia_leds_probe(struct i2c_c
- 	leds->client = client;
- 	i2c_set_clientdata(client, leds);
- 
-+	ret = omnia_mcu_get_features(client);
-+	if (ret < 0) {
-+		dev_err(dev, "Cannot determine MCU supported features: %d\n",
-+			ret);
-+		return ret;
-+	}
-+
-+	leds->has_gamma_correction = ret & FEAT_LED_GAMMA_CORRECTION;
-+	if (!leds->has_gamma_correction) {
-+		dev_info(dev,
-+			 "Your board's MCU firmware does not support the LED gamma correction feature.\n");
-+		dev_info(dev,
-+			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
-+	}
-+
- 	mutex_init(&leds->lock);
- 
- 	ret = devm_led_trigger_register(dev, &omnia_hw_trigger);
diff --git a/target/linux/generic/backport-6.1/815-v6.7-5-leds-turris-omnia-Fix-brightness-setting-and-trigger.patch b/target/linux/generic/backport-6.1/815-v6.7-5-leds-turris-omnia-Fix-brightness-setting-and-trigger.patch
deleted file mode 100644
index b0cebdcf1490..000000000000
--- a/target/linux/generic/backport-6.1/815-v6.7-5-leds-turris-omnia-Fix-brightness-setting-and-trigger.patch
+++ /dev/null
@@ -1,167 +0,0 @@
-From ffec49d391c5f0195360912b216aa24dbc9b53c8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 16 Oct 2023 16:15:38 +0200
-Subject: [PATCH] leds: turris-omnia: Fix brightness setting and trigger
- activating
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-I have improperly refactored commits
-  4d5ed2621c24 ("leds: turris-omnia: Make set_brightness() more efficient")
-and
-  aaf38273cf76 ("leds: turris-omnia: Support HW controlled mode via private trigger")
-after Lee requested a change in API semantics of the new functions I
-introduced in commit
-  28350bc0ac77 ("leds: turris-omnia: Do not use SMBUS calls").
-
-Before the change, the function omnia_cmd_write_u8() returned 0 on
-success, and afterwards it returned a positive value (number of bytes
-written). The latter version was applied, but the following commits did
-not properly account for this change.
-
-This results in non-functional LED's .brightness_set_blocking() and
-trigger's .activate() methods.
-
-The main reasoning behind the semantics change was that read/write
-methods should return the number of read/written bytes on success.
-It was pointed to me [1] that this is not always true (for example the
-regmap API does not do so), and since the driver never uses this number
-of read/written bytes information, I decided to fix this issue by
-changing the functions to the original semantics (return 0 on success).
-
-[1] https://lore.kernel.org/linux-gpio/ZQnn+Gi0xVlsGCYA@smile.fi.intel.com/
-
-Fixes: 28350bc0ac77 ("leds: turris-omnia: Do not use SMBUS calls")
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/leds/leds-turris-omnia.c | 37 +++++++++++++++++---------------
- 1 file changed, 20 insertions(+), 17 deletions(-)
-
---- a/drivers/leds/leds-turris-omnia.c
-+++ b/drivers/leds/leds-turris-omnia.c
-@@ -60,8 +60,11 @@ struct omnia_leds {
- static int omnia_cmd_write_u8(const struct i2c_client *client, u8 cmd, u8 val)
- {
- 	u8 buf[2] = { cmd, val };
-+	int ret;
-+
-+	ret = i2c_master_send(client, buf, sizeof(buf));
- 
--	return i2c_master_send(client, buf, sizeof(buf));
-+	return ret < 0 ? ret : 0;
- }
- 
- static int omnia_cmd_read_raw(struct i2c_adapter *adapter, u8 addr, u8 cmd,
-@@ -81,7 +84,7 @@ static int omnia_cmd_read_raw(struct i2c
- 
- 	ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
- 	if (likely(ret == ARRAY_SIZE(msgs)))
--		return len;
-+		return 0;
- 	else if (ret < 0)
- 		return ret;
- 	else
-@@ -91,11 +94,11 @@ static int omnia_cmd_read_raw(struct i2c
- static int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
- {
- 	u8 reply;
--	int ret;
-+	int err;
- 
--	ret = omnia_cmd_read_raw(client->adapter, client->addr, cmd, &reply, 1);
--	if (ret < 0)
--		return ret;
-+	err = omnia_cmd_read_raw(client->adapter, client->addr, cmd, &reply, 1);
-+	if (err)
-+		return err;
- 
- 	return reply;
- }
-@@ -236,7 +239,7 @@ static void omnia_hwtrig_deactivate(stru
- 
- 	mutex_unlock(&leds->lock);
- 
--	if (err < 0)
-+	if (err)
- 		dev_err(cdev->dev, "Cannot put LED to software mode: %i\n",
- 			err);
- }
-@@ -302,7 +305,7 @@ static int omnia_led_register(struct i2c
- 	ret = omnia_cmd_write_u8(client, CMD_LED_MODE,
- 				 CMD_LED_MODE_LED(led->reg) |
- 				 CMD_LED_MODE_USER);
--	if (ret < 0) {
-+	if (ret) {
- 		dev_err(dev, "Cannot set LED %pOF to software mode: %i\n", np,
- 			ret);
- 		return ret;
-@@ -311,7 +314,7 @@ static int omnia_led_register(struct i2c
- 	/* disable the LED */
- 	ret = omnia_cmd_write_u8(client, CMD_LED_STATE,
- 				 CMD_LED_STATE_LED(led->reg));
--	if (ret < 0) {
-+	if (ret) {
- 		dev_err(dev, "Cannot set LED %pOF brightness: %i\n", np, ret);
- 		return ret;
- 	}
-@@ -364,7 +367,7 @@ static ssize_t brightness_store(struct d
- {
- 	struct i2c_client *client = to_i2c_client(dev);
- 	unsigned long brightness;
--	int ret;
-+	int err;
- 
- 	if (kstrtoul(buf, 10, &brightness))
- 		return -EINVAL;
-@@ -372,9 +375,9 @@ static ssize_t brightness_store(struct d
- 	if (brightness > 100)
- 		return -EINVAL;
- 
--	ret = omnia_cmd_write_u8(client, CMD_LED_SET_BRIGHTNESS, brightness);
-+	err = omnia_cmd_write_u8(client, CMD_LED_SET_BRIGHTNESS, brightness);
- 
--	return ret < 0 ? ret : count;
-+	return err ?: count;
- }
- static DEVICE_ATTR_RW(brightness);
- 
-@@ -403,7 +406,7 @@ static ssize_t gamma_correction_store(st
- 	struct i2c_client *client = to_i2c_client(dev);
- 	struct omnia_leds *leds = i2c_get_clientdata(client);
- 	bool val;
--	int ret;
-+	int err;
- 
- 	if (!leds->has_gamma_correction)
- 		return -EOPNOTSUPP;
-@@ -411,9 +414,9 @@ static ssize_t gamma_correction_store(st
- 	if (kstrtobool(buf, &val) < 0)
- 		return -EINVAL;
- 
--	ret = omnia_cmd_write_u8(client, CMD_SET_GAMMA_CORRECTION, val);
-+	err = omnia_cmd_write_u8(client, CMD_SET_GAMMA_CORRECTION, val);
- 
--	return ret < 0 ? ret : count;
-+	return err ?: count;
- }
- static DEVICE_ATTR_RW(gamma_correction);
- 
-@@ -431,7 +434,7 @@ static int omnia_mcu_get_features(const
- 
- 	err = omnia_cmd_read_raw(client->adapter, OMNIA_MCU_I2C_ADDR,
- 				 CMD_GET_STATUS_WORD, &reply, sizeof(reply));
--	if (err < 0)
-+	if (err)
- 		return err;
- 
- 	/* Check whether MCU firmware supports the CMD_GET_FEAUTRES command */
-@@ -440,7 +443,7 @@ static int omnia_mcu_get_features(const
- 
- 	err = omnia_cmd_read_raw(client->adapter, OMNIA_MCU_I2C_ADDR,
- 				 CMD_GET_FEATURES, &reply, sizeof(reply));
--	if (err < 0)
-+	if (err)
- 		return err;
- 
- 	return le16_to_cpu(reply);
diff --git a/target/linux/generic/backport-6.1/816-v6.7-0001-nvmem-qfprom-Mark-core-clk-as-optional.patch b/target/linux/generic/backport-6.1/816-v6.7-0001-nvmem-qfprom-Mark-core-clk-as-optional.patch
deleted file mode 100644
index 66d402814057..000000000000
--- a/target/linux/generic/backport-6.1/816-v6.7-0001-nvmem-qfprom-Mark-core-clk-as-optional.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 16724d6ea40a2c9315f5a0d81005dfa4d7a6da24 Mon Sep 17 00:00:00 2001
-From: Luca Weiss <luca.weiss@fairphone.com>
-Date: Fri, 20 Oct 2023 11:55:40 +0100
-Subject: [PATCH] nvmem: qfprom: Mark core clk as optional
-
-On some platforms like sc7280 on non-ChromeOS devices the core clock
-cannot be touched by Linux so we cannot provide it. Mark it as optional
-as accessing qfprom for reading works without it but we still prohibit
-writing if we cannot provide the clock.
-
-Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
-Reviewed-by: Douglas Anderson <dianders@chromium.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231020105545.216052-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/qfprom.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -423,12 +423,12 @@ static int qfprom_probe(struct platform_
- 		if (IS_ERR(priv->vcc))
- 			return PTR_ERR(priv->vcc);
- 
--		priv->secclk = devm_clk_get(dev, "core");
-+		priv->secclk = devm_clk_get_optional(dev, "core");
- 		if (IS_ERR(priv->secclk))
- 			return dev_err_probe(dev, PTR_ERR(priv->secclk), "Error getting clock\n");
- 
--		/* Only enable writing if we have SoC data. */
--		if (priv->soc_data)
-+		/* Only enable writing if we have SoC data and a valid clock */
-+		if (priv->soc_data && priv->secclk)
- 			econfig.reg_write = qfprom_reg_write;
- 	}
- 
diff --git a/target/linux/generic/backport-6.1/816-v6.7-0002-nvmem-add-explicit-config-option-to-read-old-syntax-.patch b/target/linux/generic/backport-6.1/816-v6.7-0002-nvmem-add-explicit-config-option-to-read-old-syntax-.patch
deleted file mode 100644
index 547122ae48b1..000000000000
--- a/target/linux/generic/backport-6.1/816-v6.7-0002-nvmem-add-explicit-config-option-to-read-old-syntax-.patch
+++ /dev/null
@@ -1,330 +0,0 @@
-From 2cc3b37f5b6df8189d55d0e812d9658ce256dfec Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 20 Oct 2023 11:55:41 +0100
-Subject: [PATCH] nvmem: add explicit config option to read old syntax fixed OF
- cells
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Binding for fixed NVMEM cells defined directly as NVMEM device subnodes
-has been deprecated. It has been replaced by the "fixed-layout" NVMEM
-layout binding.
-
-New syntax is meant to be clearer and should help avoiding imprecise
-bindings.
-
-NVMEM subsystem already supports the new binding. It should be a good
-idea to limit support for old syntax to existing drivers that actually
-support & use it (we can't break backward compatibility!). That way we
-additionally encourage new bindings & drivers to ignore deprecated
-binding.
-
-It wasn't clear (to me) if rtc and w1 code actually uses old syntax
-fixed cells. I enabled them to don't risk any breakage.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-[for meson-{efuse,mx-efuse}.c]
-Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-[for mtk-efuse.c, nvmem/core.c, nvmem-provider.h]
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-[MT8192, MT8195 Chromebooks]
-Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-[for microchip-otpc.c]
-Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-[SAMA7G5-EK]
-Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231020105545.216052-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/mtd/mtdcore.c          | 2 ++
- drivers/nvmem/apple-efuses.c   | 1 +
- drivers/nvmem/core.c           | 8 +++++---
- drivers/nvmem/imx-ocotp-scu.c  | 1 +
- drivers/nvmem/imx-ocotp.c      | 1 +
- drivers/nvmem/meson-efuse.c    | 1 +
- drivers/nvmem/meson-mx-efuse.c | 1 +
- drivers/nvmem/microchip-otpc.c | 1 +
- drivers/nvmem/mtk-efuse.c      | 1 +
- drivers/nvmem/qcom-spmi-sdam.c | 1 +
- drivers/nvmem/qfprom.c         | 1 +
- drivers/nvmem/rave-sp-eeprom.c | 1 +
- drivers/nvmem/rockchip-efuse.c | 1 +
- drivers/nvmem/sc27xx-efuse.c   | 1 +
- drivers/nvmem/sec-qfprom.c     | 1 +
- drivers/nvmem/sprd-efuse.c     | 1 +
- drivers/nvmem/stm32-romem.c    | 1 +
- drivers/nvmem/sunplus-ocotp.c  | 1 +
- drivers/nvmem/sunxi_sid.c      | 1 +
- drivers/nvmem/uniphier-efuse.c | 1 +
- drivers/nvmem/zynqmp_nvmem.c   | 1 +
- drivers/rtc/nvmem.c            | 1 +
- drivers/w1/slaves/w1_ds250x.c  | 1 +
- include/linux/nvmem-provider.h | 2 ++
- 24 files changed, 30 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -523,6 +523,7 @@ static int mtd_nvmem_add(struct mtd_info
- 	config.dev = &mtd->dev;
- 	config.name = dev_name(&mtd->dev);
- 	config.owner = THIS_MODULE;
-+	config.add_legacy_fixed_of_cells = of_device_is_compatible(node, "nvmem-cells");
- 	config.reg_read = mtd_nvmem_reg_read;
- 	config.size = mtd->size;
- 	config.word_size = 1;
-@@ -891,6 +892,7 @@ static struct nvmem_device *mtd_otp_nvme
- 	config.name = compatible;
- 	config.id = NVMEM_DEVID_AUTO;
- 	config.owner = THIS_MODULE;
-+	config.add_legacy_fixed_of_cells = true;
- 	config.type = NVMEM_TYPE_OTP;
- 	config.root_only = true;
- 	config.ignore_wp = true;
---- a/drivers/nvmem/apple-efuses.c
-+++ b/drivers/nvmem/apple-efuses.c
-@@ -36,6 +36,7 @@ static int apple_efuses_probe(struct pla
- 	struct resource *res;
- 	struct nvmem_config config = {
- 		.dev = &pdev->dev,
-+		.add_legacy_fixed_of_cells = true,
- 		.read_only = true,
- 		.reg_read = apple_efuses_read,
- 		.stride = sizeof(u32),
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -997,9 +997,11 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_cells;
- 
--	rval = nvmem_add_cells_from_legacy_of(nvmem);
--	if (rval)
--		goto err_remove_cells;
-+	if (config->add_legacy_fixed_of_cells) {
-+		rval = nvmem_add_cells_from_legacy_of(nvmem);
-+		if (rval)
-+			goto err_remove_cells;
-+	}
- 
- 	rval = nvmem_add_cells_from_fixed_layout(nvmem);
- 	if (rval)
---- a/drivers/nvmem/imx-ocotp-scu.c
-+++ b/drivers/nvmem/imx-ocotp-scu.c
-@@ -220,6 +220,7 @@ static int imx_scu_ocotp_write(void *con
- 
- static struct nvmem_config imx_scu_ocotp_nvmem_config = {
- 	.name = "imx-scu-ocotp",
-+	.add_legacy_fixed_of_cells = true,
- 	.read_only = false,
- 	.word_size = 4,
- 	.stride = 1,
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -616,6 +616,7 @@ static int imx_ocotp_probe(struct platfo
- 		return PTR_ERR(priv->clk);
- 
- 	priv->params = of_device_get_match_data(&pdev->dev);
-+	imx_ocotp_nvmem_config.add_legacy_fixed_of_cells = true;
- 	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
- 	imx_ocotp_nvmem_config.dev = dev;
- 	imx_ocotp_nvmem_config.priv = priv;
---- a/drivers/nvmem/meson-efuse.c
-+++ b/drivers/nvmem/meson-efuse.c
-@@ -80,6 +80,7 @@ static int meson_efuse_probe(struct plat
- 
- 	econfig->dev = dev;
- 	econfig->name = dev_name(dev);
-+	econfig->add_legacy_fixed_of_cells = true;
- 	econfig->stride = 1;
- 	econfig->word_size = 1;
- 	econfig->reg_read = meson_efuse_read;
---- a/drivers/nvmem/meson-mx-efuse.c
-+++ b/drivers/nvmem/meson-mx-efuse.c
-@@ -211,6 +211,7 @@ static int meson_mx_efuse_probe(struct p
- 	efuse->config.owner = THIS_MODULE;
- 	efuse->config.dev = &pdev->dev;
- 	efuse->config.priv = efuse;
-+	efuse->config.add_legacy_fixed_of_cells = true;
- 	efuse->config.stride = drvdata->word_size;
- 	efuse->config.word_size = drvdata->word_size;
- 	efuse->config.size = SZ_512;
---- a/drivers/nvmem/microchip-otpc.c
-+++ b/drivers/nvmem/microchip-otpc.c
-@@ -261,6 +261,7 @@ static int mchp_otpc_probe(struct platfo
- 		return ret;
- 
- 	mchp_nvmem_config.dev = otpc->dev;
-+	mchp_nvmem_config.add_legacy_fixed_of_cells = true;
- 	mchp_nvmem_config.size = size;
- 	mchp_nvmem_config.priv = otpc;
- 	nvmem = devm_nvmem_register(&pdev->dev, &mchp_nvmem_config);
---- a/drivers/nvmem/mtk-efuse.c
-+++ b/drivers/nvmem/mtk-efuse.c
-@@ -83,6 +83,7 @@ static int mtk_efuse_probe(struct platfo
- 		return PTR_ERR(priv->base);
- 
- 	pdata = device_get_match_data(dev);
-+	econfig.add_legacy_fixed_of_cells = true;
- 	econfig.stride = 1;
- 	econfig.word_size = 1;
- 	econfig.reg_read = mtk_reg_read;
---- a/drivers/nvmem/qcom-spmi-sdam.c
-+++ b/drivers/nvmem/qcom-spmi-sdam.c
-@@ -142,6 +142,7 @@ static int sdam_probe(struct platform_de
- 	sdam->sdam_config.name = "spmi_sdam";
- 	sdam->sdam_config.id = NVMEM_DEVID_AUTO;
- 	sdam->sdam_config.owner = THIS_MODULE;
-+	sdam->sdam_config.add_legacy_fixed_of_cells = true;
- 	sdam->sdam_config.stride = 1;
- 	sdam->sdam_config.word_size = 1;
- 	sdam->sdam_config.reg_read = sdam_read;
---- a/drivers/nvmem/qfprom.c
-+++ b/drivers/nvmem/qfprom.c
-@@ -357,6 +357,7 @@ static int qfprom_probe(struct platform_
- {
- 	struct nvmem_config econfig = {
- 		.name = "qfprom",
-+		.add_legacy_fixed_of_cells = true,
- 		.stride = 1,
- 		.word_size = 1,
- 		.id = NVMEM_DEVID_AUTO,
---- a/drivers/nvmem/rave-sp-eeprom.c
-+++ b/drivers/nvmem/rave-sp-eeprom.c
-@@ -328,6 +328,7 @@ static int rave_sp_eeprom_probe(struct p
- 	of_property_read_string(np, "zii,eeprom-name", &config.name);
- 	config.priv		= eeprom;
- 	config.dev		= dev;
-+	config.add_legacy_fixed_of_cells	= true;
- 	config.size		= size;
- 	config.reg_read		= rave_sp_eeprom_reg_read;
- 	config.reg_write	= rave_sp_eeprom_reg_write;
---- a/drivers/nvmem/rockchip-efuse.c
-+++ b/drivers/nvmem/rockchip-efuse.c
-@@ -205,6 +205,7 @@ static int rockchip_rk3399_efuse_read(vo
- 
- static struct nvmem_config econfig = {
- 	.name = "rockchip-efuse",
-+	.add_legacy_fixed_of_cells = true,
- 	.stride = 1,
- 	.word_size = 1,
- 	.read_only = true,
---- a/drivers/nvmem/sc27xx-efuse.c
-+++ b/drivers/nvmem/sc27xx-efuse.c
-@@ -248,6 +248,7 @@ static int sc27xx_efuse_probe(struct pla
- 	econfig.reg_read = sc27xx_efuse_read;
- 	econfig.priv = efuse;
- 	econfig.dev = &pdev->dev;
-+	econfig.add_legacy_fixed_of_cells = true;
- 	nvmem = devm_nvmem_register(&pdev->dev, &econfig);
- 	if (IS_ERR(nvmem)) {
- 		dev_err(&pdev->dev, "failed to register nvmem config\n");
---- a/drivers/nvmem/sec-qfprom.c
-+++ b/drivers/nvmem/sec-qfprom.c
-@@ -47,6 +47,7 @@ static int sec_qfprom_probe(struct platf
- {
- 	struct nvmem_config econfig = {
- 		.name = "sec-qfprom",
-+		.add_legacy_fixed_of_cells = true,
- 		.stride = 1,
- 		.word_size = 1,
- 		.id = NVMEM_DEVID_AUTO,
---- a/drivers/nvmem/sprd-efuse.c
-+++ b/drivers/nvmem/sprd-efuse.c
-@@ -408,6 +408,7 @@ static int sprd_efuse_probe(struct platf
- 	econfig.read_only = false;
- 	econfig.name = "sprd-efuse";
- 	econfig.size = efuse->data->blk_nums * SPRD_EFUSE_BLOCK_WIDTH;
-+	econfig.add_legacy_fixed_of_cells = true;
- 	econfig.reg_read = sprd_efuse_read;
- 	econfig.reg_write = sprd_efuse_write;
- 	econfig.priv = efuse;
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -207,6 +207,7 @@ static int stm32_romem_probe(struct plat
- 	priv->cfg.priv = priv;
- 	priv->cfg.owner = THIS_MODULE;
- 	priv->cfg.type = NVMEM_TYPE_OTP;
-+	priv->cfg.add_legacy_fixed_of_cells = true;
- 
- 	priv->lower = 0;
- 
---- a/drivers/nvmem/sunplus-ocotp.c
-+++ b/drivers/nvmem/sunplus-ocotp.c
-@@ -145,6 +145,7 @@ disable_clk:
- 
- static struct nvmem_config sp_ocotp_nvmem_config = {
- 	.name = "sp-ocotp",
-+	.add_legacy_fixed_of_cells = true,
- 	.read_only = true,
- 	.word_size = 1,
- 	.size = QAC628_OTP_SIZE,
---- a/drivers/nvmem/sunxi_sid.c
-+++ b/drivers/nvmem/sunxi_sid.c
-@@ -154,6 +154,7 @@ static int sunxi_sid_probe(struct platfo
- 	nvmem_cfg->dev = dev;
- 	nvmem_cfg->name = "sunxi-sid";
- 	nvmem_cfg->type = NVMEM_TYPE_OTP;
-+	nvmem_cfg->add_legacy_fixed_of_cells = true;
- 	nvmem_cfg->read_only = true;
- 	nvmem_cfg->size = cfg->size;
- 	nvmem_cfg->word_size = 1;
---- a/drivers/nvmem/uniphier-efuse.c
-+++ b/drivers/nvmem/uniphier-efuse.c
-@@ -52,6 +52,7 @@ static int uniphier_efuse_probe(struct p
- 	econfig.size = resource_size(res);
- 	econfig.priv = priv;
- 	econfig.dev = dev;
-+	econfig.add_legacy_fixed_of_cells = true;
- 	nvmem = devm_nvmem_register(dev, &econfig);
- 
- 	return PTR_ERR_OR_ZERO(nvmem);
---- a/drivers/nvmem/zynqmp_nvmem.c
-+++ b/drivers/nvmem/zynqmp_nvmem.c
-@@ -58,6 +58,7 @@ static int zynqmp_nvmem_probe(struct pla
- 
- 	priv->dev = dev;
- 	econfig.dev = dev;
-+	econfig.add_legacy_fixed_of_cells = true;
- 	econfig.reg_read = zynqmp_nvmem_read;
- 	econfig.priv = priv;
- 
---- a/drivers/rtc/nvmem.c
-+++ b/drivers/rtc/nvmem.c
-@@ -21,6 +21,7 @@ int devm_rtc_nvmem_register(struct rtc_d
- 
- 	nvmem_config->dev = dev;
- 	nvmem_config->owner = rtc->owner;
-+	nvmem_config->add_legacy_fixed_of_cells = true;
- 	nvmem = devm_nvmem_register(dev, nvmem_config);
- 	if (IS_ERR(nvmem))
- 		dev_err(dev, "failed to register nvmem device for RTC\n");
---- a/drivers/w1/slaves/w1_ds250x.c
-+++ b/drivers/w1/slaves/w1_ds250x.c
-@@ -168,6 +168,7 @@ static int w1_eprom_add_slave(struct w1_
- 	struct nvmem_device *nvmem;
- 	struct nvmem_config nvmem_cfg = {
- 		.dev = &sl->dev,
-+		.add_legacy_fixed_of_cells = true,
- 		.reg_read = w1_nvmem_read,
- 		.type = NVMEM_TYPE_OTP,
- 		.read_only = true,
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -82,6 +82,7 @@ struct nvmem_cell_info {
-  * @owner:	Pointer to exporter module. Used for refcounting.
-  * @cells:	Optional array of pre-defined NVMEM cells.
-  * @ncells:	Number of elements in cells.
-+ * @add_legacy_fixed_of_cells:	Read fixed NVMEM cells from old OF syntax.
-  * @keepout:	Optional array of keepout ranges (sorted ascending by start).
-  * @nkeepout:	Number of elements in the keepout array.
-  * @type:	Type of the nvmem storage
-@@ -112,6 +113,7 @@ struct nvmem_config {
- 	struct module		*owner;
- 	const struct nvmem_cell_info	*cells;
- 	int			ncells;
-+	bool			add_legacy_fixed_of_cells;
- 	const struct nvmem_keepout *keepout;
- 	unsigned int		nkeepout;
- 	enum nvmem_type		type;
diff --git a/target/linux/generic/backport-6.1/816-v6.7-0003-nvmem-Use-device_get_match_data.patch b/target/linux/generic/backport-6.1/816-v6.7-0003-nvmem-Use-device_get_match_data.patch
deleted file mode 100644
index 84c029398245..000000000000
--- a/target/linux/generic/backport-6.1/816-v6.7-0003-nvmem-Use-device_get_match_data.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 0720219f4d34a88a9badb4de70cfad7585687d48 Mon Sep 17 00:00:00 2001
-From: Rob Herring <robh@kernel.org>
-Date: Fri, 20 Oct 2023 11:55:45 +0100
-Subject: [PATCH] nvmem: Use device_get_match_data()
-
-Use preferred device_get_match_data() instead of of_match_device() to
-get the driver match data. With this, adjust the includes to explicitly
-include the correct headers.
-
-Signed-off-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231020105545.216052-7-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/mxs-ocotp.c   | 10 ++++------
- drivers/nvmem/stm32-romem.c |  7 ++++---
- 2 files changed, 8 insertions(+), 9 deletions(-)
-
---- a/drivers/nvmem/mxs-ocotp.c
-+++ b/drivers/nvmem/mxs-ocotp.c
-@@ -13,8 +13,9 @@
- #include <linux/io.h>
- #include <linux/module.h>
- #include <linux/nvmem-provider.h>
--#include <linux/of_device.h>
-+#include <linux/of.h>
- #include <linux/platform_device.h>
-+#include <linux/property.h>
- #include <linux/slab.h>
- #include <linux/stmp_device.h>
- 
-@@ -140,11 +141,10 @@ static int mxs_ocotp_probe(struct platfo
- 	struct device *dev = &pdev->dev;
- 	const struct mxs_data *data;
- 	struct mxs_ocotp *otp;
--	const struct of_device_id *match;
- 	int ret;
- 
--	match = of_match_device(dev->driver->of_match_table, dev);
--	if (!match || !match->data)
-+	data = device_get_match_data(dev);
-+	if (!data)
- 		return -EINVAL;
- 
- 	otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
-@@ -169,8 +169,6 @@ static int mxs_ocotp_probe(struct platfo
- 	if (ret)
- 		return ret;
- 
--	data = match->data;
--
- 	ocotp_config.size = data->size;
- 	ocotp_config.priv = otp;
- 	ocotp_config.dev = dev;
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -10,7 +10,9 @@
- #include <linux/io.h>
- #include <linux/module.h>
- #include <linux/nvmem-provider.h>
--#include <linux/of_device.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
- #include <linux/tee_drv.h>
- 
- #include "stm32-bsec-optee-ta.h"
-@@ -211,8 +213,7 @@ static int stm32_romem_probe(struct plat
- 
- 	priv->lower = 0;
- 
--	cfg = (const struct stm32_romem_cfg *)
--		of_match_device(dev->driver->of_match_table, dev)->data;
-+	cfg = device_get_match_data(dev);
- 	if (!cfg) {
- 		priv->cfg.read_only = true;
- 		priv->cfg.size = resource_size(res);
diff --git a/target/linux/generic/backport-6.1/816-v6.7-0004-Revert-nvmem-add-new-config-option.patch b/target/linux/generic/backport-6.1/816-v6.7-0004-Revert-nvmem-add-new-config-option.patch
deleted file mode 100644
index 1ed7c4333220..000000000000
--- a/target/linux/generic/backport-6.1/816-v6.7-0004-Revert-nvmem-add-new-config-option.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From f4cf4e5db331a5ce69e3f0b21d322cac0f4e4b5d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 23 Oct 2023 12:27:59 +0200
-Subject: [PATCH] Revert "nvmem: add new config option"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit 517f14d9cf3533d5ab4fded195ab6f80a92e378f.
-
-Config option "no_of_node" is no longer needed since adding a more
-explicit and targeted option "add_legacy_fixed_of_cells".
-
-That "no_of_node" config option was needed *earlier* to help mtd's case.
-
-DT nodes of MTD partitions (that are also NVMEM devices) may contain
-subnodes. Those SHOULD NOT be treated as NVMEM fixed cells.
-
-To prevent NVMEM core code from parsing subnodes a "no_of_node" option
-was added (and set to true in mtd) to make for_each_child_of_node() in
-NVMEM a no-op. That was a bit hacky because it was messing with
-"of_node" pointer to achieve some side-effect.
-
-With the introduction of "add_legacy_fixed_of_cells" config option
-things got more explicit. MTD subsystem simply tells NVMEM when to look
-for fixed cells and there is no need to hack "of_node" pointer anymore.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231023102759.31529-1-zajec5@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/mtd/mtdcore.c          | 1 -
- drivers/nvmem/core.c           | 2 +-
- include/linux/nvmem-provider.h | 2 --
- 3 files changed, 1 insertion(+), 4 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -531,7 +531,6 @@ static int mtd_nvmem_add(struct mtd_info
- 	config.read_only = true;
- 	config.root_only = true;
- 	config.ignore_wp = true;
--	config.no_of_node = !of_device_is_compatible(node, "nvmem-cells");
- 	config.priv = mtd;
- 
- 	mtd->nvmem = nvmem_register(&config);
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -935,7 +935,7 @@ struct nvmem_device *nvmem_register(cons
- 	nvmem->nkeepout = config->nkeepout;
- 	if (config->of_node)
- 		nvmem->dev.of_node = config->of_node;
--	else if (!config->no_of_node)
-+	else
- 		nvmem->dev.of_node = config->dev->of_node;
- 
- 	switch (config->id) {
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -89,7 +89,6 @@ struct nvmem_cell_info {
-  * @read_only:	Device is read-only.
-  * @root_only:	Device is accessibly to root only.
-  * @of_node:	If given, this will be used instead of the parent's of_node.
-- * @no_of_node:	Device should not use the parent's of_node even if it's !NULL.
-  * @reg_read:	Callback to read data.
-  * @reg_write:	Callback to write data.
-  * @size:	Device size.
-@@ -122,7 +121,6 @@ struct nvmem_config {
- 	bool			ignore_wp;
- 	struct nvmem_layout	*layout;
- 	struct device_node	*of_node;
--	bool			no_of_node;
- 	nvmem_reg_read_t	reg_read;
- 	nvmem_reg_write_t	reg_write;
- 	int	size;
diff --git a/target/linux/generic/backport-6.1/816-v6.7-0005-nvmem-Do-not-expect-fixed-layouts-to-grab-a-layout-d.patch b/target/linux/generic/backport-6.1/816-v6.7-0005-nvmem-Do-not-expect-fixed-layouts-to-grab-a-layout-d.patch
deleted file mode 100644
index 65b8878310e6..000000000000
--- a/target/linux/generic/backport-6.1/816-v6.7-0005-nvmem-Do-not-expect-fixed-layouts-to-grab-a-layout-d.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From b7c1e53751cb3990153084f31c41f25fde3b629c Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 24 Nov 2023 20:38:14 +0100
-Subject: [PATCH] nvmem: Do not expect fixed layouts to grab a layout driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Two series lived in parallel for some time, which led to this situation:
-- The nvmem-layout container is used for dynamic layouts
-- We now expect fixed layouts to also use the nvmem-layout container but
-this does not require any additional driver, the support is built-in the
-nvmem core.
-
-Ensure we don't refuse to probe for wrong reasons.
-
-Fixes: 27f699e578b1 ("nvmem: core: add support for fixed cells *layout*")
-Cc: stable@vger.kernel.org
-Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Tested-by: Rafał Miłecki <rafal@milecki.pl>
-Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
-Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
-
-Link: https://lore.kernel.org/r/20231124193814.360552-1-miquel.raynal@bootlin.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -796,6 +796,12 @@ static struct nvmem_layout *nvmem_layout
- 	if (!layout_np)
- 		return NULL;
- 
-+	/* Fixed layouts don't have a matching driver */
-+	if (of_device_is_compatible(layout_np, "fixed-layout")) {
-+		of_node_put(layout_np);
-+		return NULL;
-+	}
-+
- 	/*
- 	 * In case the nvmem device was built-in while the layout was built as a
- 	 * module, we shall manually request the layout driver loading otherwise
diff --git a/target/linux/generic/backport-6.1/816-v6.7-0006-nvmem-brcm_nvram-store-a-copy-of-NVRAM-content.patch b/target/linux/generic/backport-6.1/816-v6.7-0006-nvmem-brcm_nvram-store-a-copy-of-NVRAM-content.patch
deleted file mode 100644
index d49a20599dc2..000000000000
--- a/target/linux/generic/backport-6.1/816-v6.7-0006-nvmem-brcm_nvram-store-a-copy-of-NVRAM-content.patch
+++ /dev/null
@@ -1,261 +0,0 @@
-From 1e37bf84afacd5ba17b7a13a18ca2bc78aff05c0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 15 Dec 2023 11:13:58 +0000
-Subject: [PATCH] nvmem: brcm_nvram: store a copy of NVRAM content
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This driver uses MMIO access for reading NVRAM from a flash device.
-Underneath there is a flash controller that reads data and provides
-mapping window.
-
-Using MMIO interface affects controller configuration and may break real
-controller driver. It was reported by multiple users of devices with
-NVRAM stored on NAND.
-
-Modify driver to read & cache NVRAM content during init and use that
-copy to provide NVMEM data when requested. On NAND flashes due to their
-alignment NVRAM partitions can be quite big (1 MiB and more) while
-actual NVRAM content stays quite small (usually 16 to 32 KiB). To avoid
-allocating so much memory check for actual data length.
-
-Link: https://lore.kernel.org/linux-mtd/CACna6rwf3_9QVjYcM+847biTX=K0EoWXuXcSMkJO1Vy_5vmVqA@mail.gmail.com/
-Fixes: 3fef9ed0627a ("nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM")
-Cc:  <Stable@vger.kernel.org>
-Cc: Arınç ÜNAL <arinc.unal@arinc9.com>
-Cc: Florian Fainelli <florian.fainelli@broadcom.com>
-Cc: Scott Branden <scott.branden@broadcom.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231215111358.316727-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/brcm_nvram.c | 134 ++++++++++++++++++++++++++-----------
- 1 file changed, 94 insertions(+), 40 deletions(-)
-
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -17,9 +17,23 @@
- 
- #define NVRAM_MAGIC			"FLSH"
- 
-+/**
-+ * struct brcm_nvram - driver state internal struct
-+ *
-+ * @dev:		NVMEM device pointer
-+ * @nvmem_size:		Size of the whole space available for NVRAM
-+ * @data:		NVRAM data copy stored to avoid poking underlaying flash controller
-+ * @data_len:		NVRAM data size
-+ * @padding_byte:	Padding value used to fill remaining space
-+ * @cells:		Array of discovered NVMEM cells
-+ * @ncells:		Number of elements in cells
-+ */
- struct brcm_nvram {
- 	struct device *dev;
--	void __iomem *base;
-+	size_t nvmem_size;
-+	uint8_t *data;
-+	size_t data_len;
-+	uint8_t padding_byte;
- 	struct nvmem_cell_info *cells;
- 	int ncells;
- };
-@@ -36,10 +50,47 @@ static int brcm_nvram_read(void *context
- 			   size_t bytes)
- {
- 	struct brcm_nvram *priv = context;
--	u8 *dst = val;
-+	size_t to_copy;
-+
-+	if (offset + bytes > priv->data_len)
-+		to_copy = max_t(ssize_t, (ssize_t)priv->data_len - offset, 0);
-+	else
-+		to_copy = bytes;
-+
-+	memcpy(val, priv->data + offset, to_copy);
-+
-+	memset((uint8_t *)val + to_copy, priv->padding_byte, bytes - to_copy);
-+
-+	return 0;
-+}
-+
-+static int brcm_nvram_copy_data(struct brcm_nvram *priv, struct platform_device *pdev)
-+{
-+	struct resource *res;
-+	void __iomem *base;
-+
-+	base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
-+	if (IS_ERR(base))
-+		return PTR_ERR(base);
-+
-+	priv->nvmem_size = resource_size(res);
-+
-+	priv->padding_byte = readb(base + priv->nvmem_size - 1);
-+	for (priv->data_len = priv->nvmem_size;
-+	     priv->data_len;
-+	     priv->data_len--) {
-+		if (readb(base + priv->data_len - 1) != priv->padding_byte)
-+			break;
-+	}
-+	WARN(priv->data_len > SZ_128K, "Unexpected (big) NVRAM size: %zu B\n", priv->data_len);
- 
--	while (bytes--)
--		*dst++ = readb(priv->base + offset++);
-+	priv->data = devm_kzalloc(priv->dev, priv->data_len, GFP_KERNEL);
-+	if (!priv->data)
-+		return -ENOMEM;
-+
-+	memcpy_fromio(priv->data, base, priv->data_len);
-+
-+	bcm47xx_nvram_init_from_iomem(base, priv->data_len);
- 
- 	return 0;
- }
-@@ -67,8 +118,13 @@ static int brcm_nvram_add_cells(struct b
- 				size_t len)
- {
- 	struct device *dev = priv->dev;
--	char *var, *value, *eq;
-+	char *var, *value;
-+	uint8_t tmp;
- 	int idx;
-+	int err = 0;
-+
-+	tmp = priv->data[len - 1];
-+	priv->data[len - 1] = '\0';
- 
- 	priv->ncells = 0;
- 	for (var = data + sizeof(struct brcm_nvram_header);
-@@ -78,67 +134,68 @@ static int brcm_nvram_add_cells(struct b
- 	}
- 
- 	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
--	if (!priv->cells)
--		return -ENOMEM;
-+	if (!priv->cells) {
-+		err = -ENOMEM;
-+		goto out;
-+	}
- 
- 	for (var = data + sizeof(struct brcm_nvram_header), idx = 0;
- 	     var < (char *)data + len && *var;
- 	     var = value + strlen(value) + 1, idx++) {
-+		char *eq, *name;
-+
- 		eq = strchr(var, '=');
- 		if (!eq)
- 			break;
- 		*eq = '\0';
-+		name = devm_kstrdup(dev, var, GFP_KERNEL);
-+		*eq = '=';
-+		if (!name) {
-+			err = -ENOMEM;
-+			goto out;
-+		}
- 		value = eq + 1;
- 
--		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
--		if (!priv->cells[idx].name)
--			return -ENOMEM;
-+		priv->cells[idx].name = name;
- 		priv->cells[idx].offset = value - (char *)data;
- 		priv->cells[idx].bytes = strlen(value);
- 		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
--		if (!strcmp(var, "et0macaddr") ||
--		    !strcmp(var, "et1macaddr") ||
--		    !strcmp(var, "et2macaddr")) {
-+		if (!strcmp(name, "et0macaddr") ||
-+		    !strcmp(name, "et1macaddr") ||
-+		    !strcmp(name, "et2macaddr")) {
- 			priv->cells[idx].raw_len = strlen(value);
- 			priv->cells[idx].bytes = ETH_ALEN;
- 			priv->cells[idx].read_post_process = brcm_nvram_read_post_process_macaddr;
- 		}
- 	}
- 
--	return 0;
-+out:
-+	priv->data[len - 1] = tmp;
-+	return err;
- }
- 
- static int brcm_nvram_parse(struct brcm_nvram *priv)
- {
-+	struct brcm_nvram_header *header = (struct brcm_nvram_header *)priv->data;
- 	struct device *dev = priv->dev;
--	struct brcm_nvram_header header;
--	uint8_t *data;
- 	size_t len;
- 	int err;
- 
--	memcpy_fromio(&header, priv->base, sizeof(header));
--
--	if (memcmp(header.magic, NVRAM_MAGIC, 4)) {
-+	if (memcmp(header->magic, NVRAM_MAGIC, 4)) {
- 		dev_err(dev, "Invalid NVRAM magic\n");
- 		return -EINVAL;
- 	}
- 
--	len = le32_to_cpu(header.len);
--
--	data = kzalloc(len, GFP_KERNEL);
--	if (!data)
--		return -ENOMEM;
--
--	memcpy_fromio(data, priv->base, len);
--	data[len - 1] = '\0';
--
--	err = brcm_nvram_add_cells(priv, data, len);
--	if (err) {
--		dev_err(dev, "Failed to add cells: %d\n", err);
--		return err;
-+	len = le32_to_cpu(header->len);
-+	if (len > priv->nvmem_size) {
-+		dev_err(dev, "NVRAM length (%zd) exceeds mapped size (%zd)\n", len,
-+			priv->nvmem_size);
-+		return -EINVAL;
- 	}
- 
--	kfree(data);
-+	err = brcm_nvram_add_cells(priv, priv->data, len);
-+	if (err)
-+		dev_err(dev, "Failed to add cells: %d\n", err);
- 
- 	return 0;
- }
-@@ -150,7 +207,6 @@ static int brcm_nvram_probe(struct platf
- 		.reg_read = brcm_nvram_read,
- 	};
- 	struct device *dev = &pdev->dev;
--	struct resource *res;
- 	struct brcm_nvram *priv;
- 	int err;
- 
-@@ -159,21 +215,19 @@ static int brcm_nvram_probe(struct platf
- 		return -ENOMEM;
- 	priv->dev = dev;
- 
--	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
--	if (IS_ERR(priv->base))
--		return PTR_ERR(priv->base);
-+	err = brcm_nvram_copy_data(priv, pdev);
-+	if (err)
-+		return err;
- 
- 	err = brcm_nvram_parse(priv);
- 	if (err)
- 		return err;
- 
--	bcm47xx_nvram_init_from_iomem(priv->base, resource_size(res));
--
- 	config.dev = dev;
- 	config.cells = priv->cells;
- 	config.ncells = priv->ncells;
- 	config.priv = priv;
--	config.size = resource_size(res);
-+	config.size = priv->nvmem_size;
- 
- 	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
- }
diff --git a/target/linux/generic/backport-6.1/817-v6.9-0001-dt-bindings-leds-Add-FUNCTION-defines-for-per-band-W.patch b/target/linux/generic/backport-6.1/817-v6.9-0001-dt-bindings-leds-Add-FUNCTION-defines-for-per-band-W.patch
deleted file mode 100644
index bf36e19fcc7c..000000000000
--- a/target/linux/generic/backport-6.1/817-v6.9-0001-dt-bindings-leds-Add-FUNCTION-defines-for-per-band-W.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From ec18a2a83b8b9f7e39c80105ea148c769c46227b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 17 Jan 2024 16:17:36 +0100
-Subject: [PATCH] dt-bindings: leds: Add FUNCTION defines for per-band WLANs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Most wireless routers and access points can operate in multiple bands
-simultaneously. Vendors often equip their devices with per-band LEDs.
-
-Add defines for those very common functions to allow cleaner & clearer
-bindings.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20240117151736.27440-1-zajec5@gmail.com
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- include/dt-bindings/leds/common.h | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/include/dt-bindings/leds/common.h
-+++ b/include/dt-bindings/leds/common.h
-@@ -101,6 +101,9 @@
- #define LED_FUNCTION_USB "usb"
- #define LED_FUNCTION_WAN "wan"
- #define LED_FUNCTION_WLAN "wlan"
-+#define LED_FUNCTION_WLAN_2GHZ "wlan-2ghz"
-+#define LED_FUNCTION_WLAN_5GHZ "wlan-5ghz"
-+#define LED_FUNCTION_WLAN_6GHZ "wlan-6ghz"
- #define LED_FUNCTION_WPS "wps"
- 
- #endif /* __DT_BINDINGS_LEDS_H */
diff --git a/target/linux/generic/backport-6.1/817-v6.9-0002-dt-bindings-leds-Add-LED_FUNCTION_WAN_ONLINE-for-Int.patch b/target/linux/generic/backport-6.1/817-v6.9-0002-dt-bindings-leds-Add-LED_FUNCTION_WAN_ONLINE-for-Int.patch
deleted file mode 100644
index eabb9bbe9ad5..000000000000
--- a/target/linux/generic/backport-6.1/817-v6.9-0002-dt-bindings-leds-Add-LED_FUNCTION_WAN_ONLINE-for-Int.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 64e558500d2d04878b8a6d6578850c475171d6ba Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 23 Feb 2024 12:22:23 +0100
-Subject: [PATCH] dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet
- access
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's common for routers to have LED indicating link on the WAN port.
-
-Some devices however have an extra LED that's meant to be used if WAN
-connection is actually "online" (there is Internet access available).
-
-It was suggested to add #define for such use case.
-
-Link: https://lore.kernel.org/linux-devicetree/80e92209-5578-44e7-bd4b-603a29053ddf@collabora.com/T/#u
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20240223112223.1368-1-zajec5@gmail.com
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- include/dt-bindings/leds/common.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/dt-bindings/leds/common.h
-+++ b/include/dt-bindings/leds/common.h
-@@ -100,6 +100,7 @@
- #define LED_FUNCTION_TX "tx"
- #define LED_FUNCTION_USB "usb"
- #define LED_FUNCTION_WAN "wan"
-+#define LED_FUNCTION_WAN_ONLINE "wan-online"
- #define LED_FUNCTION_WLAN "wlan"
- #define LED_FUNCTION_WLAN_2GHZ "wlan-2ghz"
- #define LED_FUNCTION_WLAN_5GHZ "wlan-5ghz"
diff --git a/target/linux/generic/backport-6.1/818-v6.8-of-device-Export-of_device_make_bus_id.patch b/target/linux/generic/backport-6.1/818-v6.8-of-device-Export-of_device_make_bus_id.patch
deleted file mode 100644
index 564fe9822d8c..000000000000
--- a/target/linux/generic/backport-6.1/818-v6.8-of-device-Export-of_device_make_bus_id.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From 7f38b70042fcaa49219045bd1a9a2836e27a58ac Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 15 Dec 2023 11:15:27 +0000
-Subject: [PATCH] of: device: Export of_device_make_bus_id()
-
-This helper is really handy to create unique device names based on their
-device tree path, we may need it outside of the OF core (in the NVMEM
-subsystem) so let's export it. As this helper has nothing patform
-specific, let's move it to of/device.c instead of of/platform.c so we
-can add its prototype to of_device.h.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231215111536.316972-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c       | 41 +++++++++++++++++++++++++++++++++++++++
- drivers/of/platform.c     | 40 --------------------------------------
- include/linux/of_device.h |  6 ++++++
- 3 files changed, 47 insertions(+), 40 deletions(-)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -395,3 +395,44 @@ int of_device_uevent_modalias(struct dev
- 	return 0;
- }
- EXPORT_SYMBOL_GPL(of_device_uevent_modalias);
-+
-+/**
-+ * of_device_make_bus_id - Use the device node data to assign a unique name
-+ * @dev: pointer to device structure that is linked to a device tree node
-+ *
-+ * This routine will first try using the translated bus address to
-+ * derive a unique name. If it cannot, then it will prepend names from
-+ * parent nodes until a unique name can be derived.
-+ */
-+void of_device_make_bus_id(struct device *dev)
-+{
-+	struct device_node *node = dev->of_node;
-+	const __be32 *reg;
-+	u64 addr;
-+	u32 mask;
-+
-+	/* Construct the name, using parent nodes if necessary to ensure uniqueness */
-+	while (node->parent) {
-+		/*
-+		 * If the address can be translated, then that is as much
-+		 * uniqueness as we need. Make it the first component and return
-+		 */
-+		reg = of_get_property(node, "reg", NULL);
-+		if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) {
-+			if (!of_property_read_u32(node, "mask", &mask))
-+				dev_set_name(dev, dev_name(dev) ? "%llx.%x.%pOFn:%s" : "%llx.%x.%pOFn",
-+					     addr, ffs(mask) - 1, node, dev_name(dev));
-+
-+			else
-+				dev_set_name(dev, dev_name(dev) ? "%llx.%pOFn:%s" : "%llx.%pOFn",
-+					     addr, node, dev_name(dev));
-+			return;
-+		}
-+
-+		/* format arguments only used if dev_name() resolves to NULL */
-+		dev_set_name(dev, dev_name(dev) ? "%s:%s" : "%s",
-+			     kbasename(node->full_name), dev_name(dev));
-+		node = node->parent;
-+	}
-+}
-+EXPORT_SYMBOL_GPL(of_device_make_bus_id);
---- a/drivers/of/platform.c
-+++ b/drivers/of/platform.c
-@@ -64,46 +64,6 @@ EXPORT_SYMBOL(of_find_device_by_node);
-  */
- 
- /**
-- * of_device_make_bus_id - Use the device node data to assign a unique name
-- * @dev: pointer to device structure that is linked to a device tree node
-- *
-- * This routine will first try using the translated bus address to
-- * derive a unique name. If it cannot, then it will prepend names from
-- * parent nodes until a unique name can be derived.
-- */
--static void of_device_make_bus_id(struct device *dev)
--{
--	struct device_node *node = dev->of_node;
--	const __be32 *reg;
--	u64 addr;
--	u32 mask;
--
--	/* Construct the name, using parent nodes if necessary to ensure uniqueness */
--	while (node->parent) {
--		/*
--		 * If the address can be translated, then that is as much
--		 * uniqueness as we need. Make it the first component and return
--		 */
--		reg = of_get_property(node, "reg", NULL);
--		if (reg && (addr = of_translate_address(node, reg)) != OF_BAD_ADDR) {
--			if (!of_property_read_u32(node, "mask", &mask))
--				dev_set_name(dev, dev_name(dev) ? "%llx.%x.%pOFn:%s" : "%llx.%x.%pOFn",
--					     addr, ffs(mask) - 1, node, dev_name(dev));
--
--			else
--				dev_set_name(dev, dev_name(dev) ? "%llx.%pOFn:%s" : "%llx.%pOFn",
--					     addr, node, dev_name(dev));
--			return;
--		}
--
--		/* format arguments only used if dev_name() resolves to NULL */
--		dev_set_name(dev, dev_name(dev) ? "%s:%s" : "%s",
--			     kbasename(node->full_name), dev_name(dev));
--		node = node->parent;
--	}
--}
--
--/**
-  * of_device_alloc - Allocate and initialize an of_device
-  * @np: device node to assign to device
-  * @bus_id: Name to assign to the device.  May be null to use default name.
---- a/include/linux/of_device.h
-+++ b/include/linux/of_device.h
-@@ -56,6 +56,9 @@ static inline int of_dma_configure(struc
- {
- 	return of_dma_configure_id(dev, np, force_dma, NULL);
- }
-+
-+void of_device_make_bus_id(struct device *dev);
-+
- #else /* CONFIG_OF */
- 
- static inline int of_driver_match_device(struct device *dev,
-@@ -113,6 +116,9 @@ static inline int of_dma_configure(struc
- {
- 	return 0;
- }
-+
-+static inline void of_device_make_bus_id(struct device *dev) {}
-+
- #endif /* CONFIG_OF */
- 
- #endif /* _LINUX_OF_DEVICE_H */
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0001-nvmem-Move-of_nvmem_layout_get_container-in-another-.patch b/target/linux/generic/backport-6.1/819-v6.8-0001-nvmem-Move-of_nvmem_layout_get_container-in-another-.patch
deleted file mode 100644
index 59175c8051d5..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0001-nvmem-Move-of_nvmem_layout_get_container-in-another-.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 4a1a40233b4a9fc159a5c7a27dc34c5c7bc5be55 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 15 Dec 2023 11:15:28 +0000
-Subject: [PATCH] nvmem: Move of_nvmem_layout_get_container() in another header
-
-nvmem-consumer.h is included by consumer devices, extracting data from
-NVMEM devices whereas nvmem-provider.h is included by devices providing
-NVMEM content.
-
-The only users of of_nvmem_layout_get_container() outside of the core
-are layout drivers, so better move its prototype to nvmem-provider.h.
-
-While we do so, we also move the kdoc associated with the function to
-the header rather than the .c file.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231215111536.316972-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           |  8 --------
- include/linux/nvmem-consumer.h |  7 -------
- include/linux/nvmem-provider.h | 21 +++++++++++++++++++++
- 3 files changed, 21 insertions(+), 15 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -847,14 +847,6 @@ static int nvmem_add_cells_from_layout(s
- }
- 
- #if IS_ENABLED(CONFIG_OF)
--/**
-- * of_nvmem_layout_get_container() - Get OF node to layout container.
-- *
-- * @nvmem: nvmem device.
-- *
-- * Return: a node pointer with refcount incremented or NULL if no
-- * container exists. Use of_node_put() on it when done.
-- */
- struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
- {
- 	return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout");
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -241,7 +241,6 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 				     const char *id);
- struct nvmem_device *of_nvmem_device_get(struct device_node *np,
- 					 const char *name);
--struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem);
- #else
- static inline struct nvmem_cell *of_nvmem_cell_get(struct device_node *np,
- 						   const char *id)
-@@ -254,12 +253,6 @@ static inline struct nvmem_device *of_nv
- {
- 	return ERR_PTR(-EOPNOTSUPP);
- }
--
--static inline struct device_node *
--of_nvmem_layout_get_container(struct nvmem_device *nvmem)
--{
--	return NULL;
--}
- #endif /* CONFIG_NVMEM && CONFIG_OF */
- 
- #endif  /* ifndef _LINUX_NVMEM_CONSUMER_H */
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -244,6 +244,27 @@ nvmem_layout_get_match_data(struct nvmem
- 
- #endif /* CONFIG_NVMEM */
- 
-+#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF)
-+
-+/**
-+ * of_nvmem_layout_get_container() - Get OF node of layout container
-+ *
-+ * @nvmem: nvmem device
-+ *
-+ * Return: a node pointer with refcount incremented or NULL if no
-+ * container exists. Use of_node_put() on it when done.
-+ */
-+struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem);
-+
-+#else  /* CONFIG_NVMEM && CONFIG_OF */
-+
-+static inline struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
-+{
-+	return NULL;
-+}
-+
-+#endif /* CONFIG_NVMEM && CONFIG_OF */
-+
- #define module_nvmem_layout_driver(__layout_driver)		\
- 	module_driver(__layout_driver, nvmem_layout_register,	\
- 		      nvmem_layout_unregister)
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0002-nvmem-Create-a-header-for-internal-sharing.patch b/target/linux/generic/backport-6.1/819-v6.8-0002-nvmem-Create-a-header-for-internal-sharing.patch
deleted file mode 100644
index e722109f9195..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0002-nvmem-Create-a-header-for-internal-sharing.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From ec9c08a1cb8dc5e8e003f95f5f62de41dde235bb Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 15 Dec 2023 11:15:29 +0000
-Subject: [PATCH] nvmem: Create a header for internal sharing
-
-Before adding all the NVMEM layout bus infrastructure to the core, let's
-move the main nvmem_device structure in an internal header, only
-available to the core. This way all the additional code can be added in
-a dedicated file in order to keep the current core file tidy.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231215111536.316972-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c      | 24 +-----------------------
- drivers/nvmem/internals.h | 35 +++++++++++++++++++++++++++++++++++
- 2 files changed, 36 insertions(+), 23 deletions(-)
- create mode 100644 drivers/nvmem/internals.h
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -20,29 +20,7 @@
- #include <linux/of_device.h>
- #include <linux/slab.h>
- 
--struct nvmem_device {
--	struct module		*owner;
--	struct device		dev;
--	int			stride;
--	int			word_size;
--	int			id;
--	struct kref		refcnt;
--	size_t			size;
--	bool			read_only;
--	bool			root_only;
--	int			flags;
--	enum nvmem_type		type;
--	struct bin_attribute	eeprom;
--	struct device		*base_dev;
--	struct list_head	cells;
--	const struct nvmem_keepout *keepout;
--	unsigned int		nkeepout;
--	nvmem_reg_read_t	reg_read;
--	nvmem_reg_write_t	reg_write;
--	struct gpio_desc	*wp_gpio;
--	struct nvmem_layout	*layout;
--	void *priv;
--};
-+#include "internals.h"
- 
- #define to_nvmem_device(d) container_of(d, struct nvmem_device, dev)
- 
---- /dev/null
-+++ b/drivers/nvmem/internals.h
-@@ -0,0 +1,35 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+
-+#ifndef _LINUX_NVMEM_INTERNALS_H
-+#define _LINUX_NVMEM_INTERNALS_H
-+
-+#include <linux/device.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/nvmem-provider.h>
-+
-+struct nvmem_device {
-+	struct module		*owner;
-+	struct device		dev;
-+	struct list_head	node;
-+	int			stride;
-+	int			word_size;
-+	int			id;
-+	struct kref		refcnt;
-+	size_t			size;
-+	bool			read_only;
-+	bool			root_only;
-+	int			flags;
-+	enum nvmem_type		type;
-+	struct bin_attribute	eeprom;
-+	struct device		*base_dev;
-+	struct list_head	cells;
-+	const struct nvmem_keepout *keepout;
-+	unsigned int		nkeepout;
-+	nvmem_reg_read_t	reg_read;
-+	nvmem_reg_write_t	reg_write;
-+	struct gpio_desc	*wp_gpio;
-+	struct nvmem_layout	*layout;
-+	void *priv;
-+};
-+
-+#endif  /* ifndef _LINUX_NVMEM_INTERNALS_H */
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0003-nvmem-Simplify-the-add_cells-hook.patch b/target/linux/generic/backport-6.1/819-v6.8-0003-nvmem-Simplify-the-add_cells-hook.patch
deleted file mode 100644
index 1f39dfea2f96..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0003-nvmem-Simplify-the-add_cells-hook.patch
+++ /dev/null
@@ -1,79 +0,0 @@
-From 1b7c298a4ecbc28cc6ee94005734bff55eb83d22 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 15 Dec 2023 11:15:30 +0000
-Subject: [PATCH] nvmem: Simplify the ->add_cells() hook
-
-The layout entry is not used and will anyway be made useless by the new
-layout bus infrastructure coming next, so drop it. While at it, clarify
-the kdoc entry.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231215111536.316972-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c             | 2 +-
- drivers/nvmem/layouts/onie-tlv.c | 3 +--
- drivers/nvmem/layouts/sl28vpd.c  | 3 +--
- include/linux/nvmem-provider.h   | 8 +++-----
- 4 files changed, 6 insertions(+), 10 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -816,7 +816,7 @@ static int nvmem_add_cells_from_layout(s
- 	int ret;
- 
- 	if (layout && layout->add_cells) {
--		ret = layout->add_cells(&nvmem->dev, nvmem, layout);
-+		ret = layout->add_cells(&nvmem->dev, nvmem);
- 		if (ret)
- 			return ret;
- 	}
---- a/drivers/nvmem/layouts/onie-tlv.c
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -182,8 +182,7 @@ static bool onie_tlv_crc_is_valid(struct
- 	return true;
- }
- 
--static int onie_tlv_parse_table(struct device *dev, struct nvmem_device *nvmem,
--				struct nvmem_layout *layout)
-+static int onie_tlv_parse_table(struct device *dev, struct nvmem_device *nvmem)
- {
- 	struct onie_tlv_hdr hdr;
- 	size_t table_len, data_len, hdr_len;
---- a/drivers/nvmem/layouts/sl28vpd.c
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -80,8 +80,7 @@ static int sl28vpd_v1_check_crc(struct d
- 	return 0;
- }
- 
--static int sl28vpd_add_cells(struct device *dev, struct nvmem_device *nvmem,
--			     struct nvmem_layout *layout)
-+static int sl28vpd_add_cells(struct device *dev, struct nvmem_device *nvmem)
- {
- 	const struct nvmem_cell_info *pinfo;
- 	struct nvmem_cell_info info = {0};
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -156,9 +156,8 @@ struct nvmem_cell_table {
-  *
-  * @name:		Layout name.
-  * @of_match_table:	Open firmware match table.
-- * @add_cells:		Will be called if a nvmem device is found which
-- *			has this layout. The function will add layout
-- *			specific cells with nvmem_add_one_cell().
-+ * @add_cells:		Called to populate the layout using
-+ *			nvmem_add_one_cell().
-  * @fixup_cell_info:	Will be called before a cell is added. Can be
-  *			used to modify the nvmem_cell_info.
-  * @owner:		Pointer to struct module.
-@@ -172,8 +171,7 @@ struct nvmem_cell_table {
- struct nvmem_layout {
- 	const char *name;
- 	const struct of_device_id *of_match_table;
--	int (*add_cells)(struct device *dev, struct nvmem_device *nvmem,
--			 struct nvmem_layout *layout);
-+	int (*add_cells)(struct device *dev, struct nvmem_device *nvmem);
- 	void (*fixup_cell_info)(struct nvmem_device *nvmem,
- 				struct nvmem_layout *layout,
- 				struct nvmem_cell_info *cell);
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0004-nvmem-Move-and-rename-fixup_cell_info.patch b/target/linux/generic/backport-6.1/819-v6.8-0004-nvmem-Move-and-rename-fixup_cell_info.patch
deleted file mode 100644
index c2968f2c6750..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0004-nvmem-Move-and-rename-fixup_cell_info.patch
+++ /dev/null
@@ -1,169 +0,0 @@
-From 1172460e716784ac7e1049a537bdca8edbf97360 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 15 Dec 2023 11:15:31 +0000
-Subject: [PATCH] nvmem: Move and rename ->fixup_cell_info()
-
-This hook is meant to be used by any provider and instantiating a layout
-just for this is useless. Let's instead move this hook to the nvmem
-device and add it to the config structure to be easily shared by the
-providers.
-
-While at moving this hook, rename it ->fixup_dt_cell_info() to clarify
-its main intended purpose.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231215111536.316972-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           |  6 +++---
- drivers/nvmem/imx-ocotp.c      | 11 +++--------
- drivers/nvmem/internals.h      |  2 ++
- drivers/nvmem/mtk-efuse.c      | 11 +++--------
- include/linux/nvmem-provider.h |  9 ++++-----
- 5 files changed, 15 insertions(+), 24 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -675,7 +675,6 @@ static int nvmem_validate_keepouts(struc
- 
- static int nvmem_add_cells_from_dt(struct nvmem_device *nvmem, struct device_node *np)
- {
--	struct nvmem_layout *layout = nvmem->layout;
- 	struct device *dev = &nvmem->dev;
- 	struct device_node *child;
- 	const __be32 *addr;
-@@ -705,8 +704,8 @@ static int nvmem_add_cells_from_dt(struc
- 
- 		info.np = of_node_get(child);
- 
--		if (layout && layout->fixup_cell_info)
--			layout->fixup_cell_info(nvmem, layout, &info);
-+		if (nvmem->fixup_dt_cell_info)
-+			nvmem->fixup_dt_cell_info(nvmem, &info);
- 
- 		ret = nvmem_add_one_cell(nvmem, &info);
- 		kfree(info.name);
-@@ -895,6 +894,7 @@ struct nvmem_device *nvmem_register(cons
- 
- 	kref_init(&nvmem->refcnt);
- 	INIT_LIST_HEAD(&nvmem->cells);
-+	nvmem->fixup_dt_cell_info = config->fixup_dt_cell_info;
- 
- 	nvmem->owner = config->owner;
- 	if (!nvmem->owner && config->dev->driver)
---- a/drivers/nvmem/imx-ocotp.c
-+++ b/drivers/nvmem/imx-ocotp.c
-@@ -584,17 +584,12 @@ static const struct of_device_id imx_oco
- };
- MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
- 
--static void imx_ocotp_fixup_cell_info(struct nvmem_device *nvmem,
--				      struct nvmem_layout *layout,
--				      struct nvmem_cell_info *cell)
-+static void imx_ocotp_fixup_dt_cell_info(struct nvmem_device *nvmem,
-+					 struct nvmem_cell_info *cell)
- {
- 	cell->read_post_process = imx_ocotp_cell_pp;
- }
- 
--static struct nvmem_layout imx_ocotp_layout = {
--	.fixup_cell_info = imx_ocotp_fixup_cell_info,
--};
--
- static int imx_ocotp_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-@@ -620,7 +615,7 @@ static int imx_ocotp_probe(struct platfo
- 	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
- 	imx_ocotp_nvmem_config.dev = dev;
- 	imx_ocotp_nvmem_config.priv = priv;
--	imx_ocotp_nvmem_config.layout = &imx_ocotp_layout;
-+	imx_ocotp_nvmem_config.fixup_dt_cell_info = &imx_ocotp_fixup_dt_cell_info;
- 
- 	priv->config = &imx_ocotp_nvmem_config;
- 
---- a/drivers/nvmem/internals.h
-+++ b/drivers/nvmem/internals.h
-@@ -23,6 +23,8 @@ struct nvmem_device {
- 	struct bin_attribute	eeprom;
- 	struct device		*base_dev;
- 	struct list_head	cells;
-+	void (*fixup_dt_cell_info)(struct nvmem_device *nvmem,
-+				   struct nvmem_cell_info *cell);
- 	const struct nvmem_keepout *keepout;
- 	unsigned int		nkeepout;
- 	nvmem_reg_read_t	reg_read;
---- a/drivers/nvmem/mtk-efuse.c
-+++ b/drivers/nvmem/mtk-efuse.c
-@@ -45,9 +45,8 @@ static int mtk_efuse_gpu_speedbin_pp(voi
- 	return 0;
- }
- 
--static void mtk_efuse_fixup_cell_info(struct nvmem_device *nvmem,
--				      struct nvmem_layout *layout,
--				      struct nvmem_cell_info *cell)
-+static void mtk_efuse_fixup_dt_cell_info(struct nvmem_device *nvmem,
-+					 struct nvmem_cell_info *cell)
- {
- 	size_t sz = strlen(cell->name);
- 
-@@ -61,10 +60,6 @@ static void mtk_efuse_fixup_cell_info(st
- 		cell->read_post_process = mtk_efuse_gpu_speedbin_pp;
- }
- 
--static struct nvmem_layout mtk_efuse_layout = {
--	.fixup_cell_info = mtk_efuse_fixup_cell_info,
--};
--
- static int mtk_efuse_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
-@@ -91,7 +86,7 @@ static int mtk_efuse_probe(struct platfo
- 	econfig.priv = priv;
- 	econfig.dev = dev;
- 	if (pdata->uses_post_processing)
--		econfig.layout = &mtk_efuse_layout;
-+		econfig.fixup_dt_cell_info = &mtk_efuse_fixup_dt_cell_info;
- 	nvmem = devm_nvmem_register(dev, &econfig);
- 
- 	return PTR_ERR_OR_ZERO(nvmem);
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -83,6 +83,8 @@ struct nvmem_cell_info {
-  * @cells:	Optional array of pre-defined NVMEM cells.
-  * @ncells:	Number of elements in cells.
-  * @add_legacy_fixed_of_cells:	Read fixed NVMEM cells from old OF syntax.
-+ * @fixup_dt_cell_info: Will be called before a cell is added. Can be
-+ *		used to modify the nvmem_cell_info.
-  * @keepout:	Optional array of keepout ranges (sorted ascending by start).
-  * @nkeepout:	Number of elements in the keepout array.
-  * @type:	Type of the nvmem storage
-@@ -113,6 +115,8 @@ struct nvmem_config {
- 	const struct nvmem_cell_info	*cells;
- 	int			ncells;
- 	bool			add_legacy_fixed_of_cells;
-+	void (*fixup_dt_cell_info)(struct nvmem_device *nvmem,
-+				   struct nvmem_cell_info *cell);
- 	const struct nvmem_keepout *keepout;
- 	unsigned int		nkeepout;
- 	enum nvmem_type		type;
-@@ -158,8 +162,6 @@ struct nvmem_cell_table {
-  * @of_match_table:	Open firmware match table.
-  * @add_cells:		Called to populate the layout using
-  *			nvmem_add_one_cell().
-- * @fixup_cell_info:	Will be called before a cell is added. Can be
-- *			used to modify the nvmem_cell_info.
-  * @owner:		Pointer to struct module.
-  * @node:		List node.
-  *
-@@ -172,9 +174,6 @@ struct nvmem_layout {
- 	const char *name;
- 	const struct of_device_id *of_match_table;
- 	int (*add_cells)(struct device *dev, struct nvmem_device *nvmem);
--	void (*fixup_cell_info)(struct nvmem_device *nvmem,
--				struct nvmem_layout *layout,
--				struct nvmem_cell_info *cell);
- 
- 	/* private */
- 	struct module *owner;
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0005-nvmem-core-Rework-layouts-to-become-regular-devices.patch b/target/linux/generic/backport-6.1/819-v6.8-0005-nvmem-core-Rework-layouts-to-become-regular-devices.patch
deleted file mode 100644
index 9a19dc44524e..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0005-nvmem-core-Rework-layouts-to-become-regular-devices.patch
+++ /dev/null
@@ -1,763 +0,0 @@
-From fc29fd821d9ac2ae3d32a722fac39ce874efb883 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 15 Dec 2023 11:15:32 +0000
-Subject: [PATCH] nvmem: core: Rework layouts to become regular devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Current layout support was initially written without modules support in
-mind. When the requirement for module support rose, the existing base
-was improved to adopt modularization support, but kind of a design flaw
-was introduced. With the existing implementation, when a storage device
-registers into NVMEM, the core tries to hook a layout (if any) and
-populates its cells immediately. This means, if the hardware description
-expects a layout to be hooked up, but no driver was provided for that,
-the storage medium will fail to probe and try later from
-scratch. Even if we consider that the hardware description shall be
-correct, we could still probe the storage device (especially if it
-contains the rootfs).
-
-One way to overcome this situation is to consider the layouts as
-devices, and leverage the native notifier mechanism. When a new NVMEM
-device is registered, we can populate its nvmem-layout child, if any,
-and wait for the matching to be done in order to get the cells (the
-waiting can be easily done with the NVMEM notifiers). If the layout
-driver is compiled as a module, it should automatically be loaded. This
-way, there is no strong order to enforce, any NVMEM device creation
-or NVMEM layout driver insertion will be observed as a new event which
-may lead to the creation of additional cells, without disturbing the
-probes with costly (and sometimes endless) deferrals.
-
-In order to achieve that goal we create a new bus for the nvmem-layouts
-with minimal logic to match nvmem-layout devices with nvmem-layout
-drivers. All this infrastructure code is created in the layouts.c file.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Tested-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231215111536.316972-7-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/Kconfig            |   1 +
- drivers/nvmem/Makefile           |   2 +
- drivers/nvmem/core.c             | 170 ++++++++++----------------
- drivers/nvmem/internals.h        |  21 ++++
- drivers/nvmem/layouts.c          | 201 +++++++++++++++++++++++++++++++
- drivers/nvmem/layouts/Kconfig    |   8 ++
- drivers/nvmem/layouts/onie-tlv.c |  24 +++-
- drivers/nvmem/layouts/sl28vpd.c  |  24 +++-
- include/linux/nvmem-provider.h   |  38 +++---
- 9 files changed, 354 insertions(+), 135 deletions(-)
- create mode 100644 drivers/nvmem/layouts.c
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0-only
- menuconfig NVMEM
- 	bool "NVMEM Support"
-+	imply NVMEM_LAYOUTS
- 	help
- 	  Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
- 
---- a/drivers/nvmem/Makefile
-+++ b/drivers/nvmem/Makefile
-@@ -5,6 +5,8 @@
- 
- obj-$(CONFIG_NVMEM)		+= nvmem_core.o
- nvmem_core-y			:= core.o
-+obj-$(CONFIG_NVMEM_LAYOUTS)	+= nvmem_layouts.o
-+nvmem_layouts-y			:= layouts.o
- obj-y				+= layouts/
- 
- # Devices
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -56,9 +56,6 @@ static LIST_HEAD(nvmem_lookup_list);
- 
- static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
- 
--static DEFINE_SPINLOCK(nvmem_layout_lock);
--static LIST_HEAD(nvmem_layouts);
--
- static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
- 			    void *val, size_t bytes)
- {
-@@ -740,97 +737,22 @@ static int nvmem_add_cells_from_fixed_la
- 	return err;
- }
- 
--int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner)
-+int nvmem_layout_register(struct nvmem_layout *layout)
- {
--	layout->owner = owner;
--
--	spin_lock(&nvmem_layout_lock);
--	list_add(&layout->node, &nvmem_layouts);
--	spin_unlock(&nvmem_layout_lock);
--
--	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_LAYOUT_ADD, layout);
-+	if (!layout->add_cells)
-+		return -EINVAL;
- 
--	return 0;
-+	/* Populate the cells */
-+	return layout->add_cells(&layout->nvmem->dev, layout->nvmem);
- }
--EXPORT_SYMBOL_GPL(__nvmem_layout_register);
-+EXPORT_SYMBOL_GPL(nvmem_layout_register);
- 
- void nvmem_layout_unregister(struct nvmem_layout *layout)
- {
--	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_LAYOUT_REMOVE, layout);
--
--	spin_lock(&nvmem_layout_lock);
--	list_del(&layout->node);
--	spin_unlock(&nvmem_layout_lock);
-+	/* Keep the API even with an empty stub in case we need it later */
- }
- EXPORT_SYMBOL_GPL(nvmem_layout_unregister);
- 
--static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem)
--{
--	struct device_node *layout_np;
--	struct nvmem_layout *l, *layout = ERR_PTR(-EPROBE_DEFER);
--
--	layout_np = of_nvmem_layout_get_container(nvmem);
--	if (!layout_np)
--		return NULL;
--
--	/* Fixed layouts don't have a matching driver */
--	if (of_device_is_compatible(layout_np, "fixed-layout")) {
--		of_node_put(layout_np);
--		return NULL;
--	}
--
--	/*
--	 * In case the nvmem device was built-in while the layout was built as a
--	 * module, we shall manually request the layout driver loading otherwise
--	 * we'll never have any match.
--	 */
--	of_request_module(layout_np);
--
--	spin_lock(&nvmem_layout_lock);
--
--	list_for_each_entry(l, &nvmem_layouts, node) {
--		if (of_match_node(l->of_match_table, layout_np)) {
--			if (try_module_get(l->owner))
--				layout = l;
--
--			break;
--		}
--	}
--
--	spin_unlock(&nvmem_layout_lock);
--	of_node_put(layout_np);
--
--	return layout;
--}
--
--static void nvmem_layout_put(struct nvmem_layout *layout)
--{
--	if (layout)
--		module_put(layout->owner);
--}
--
--static int nvmem_add_cells_from_layout(struct nvmem_device *nvmem)
--{
--	struct nvmem_layout *layout = nvmem->layout;
--	int ret;
--
--	if (layout && layout->add_cells) {
--		ret = layout->add_cells(&nvmem->dev, nvmem);
--		if (ret)
--			return ret;
--	}
--
--	return 0;
--}
--
--#if IS_ENABLED(CONFIG_OF)
--struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
--{
--	return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout");
--}
--EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container);
--#endif
--
- const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
- 					struct nvmem_layout *layout)
- {
-@@ -838,7 +760,7 @@ const void *nvmem_layout_get_match_data(
- 	const struct of_device_id *match;
- 
- 	layout_np = of_nvmem_layout_get_container(nvmem);
--	match = of_match_node(layout->of_match_table, layout_np);
-+	match = of_match_node(layout->dev.driver->of_match_table, layout_np);
- 
- 	return match ? match->data : NULL;
- }
-@@ -950,19 +872,6 @@ struct nvmem_device *nvmem_register(cons
- 			goto err_put_device;
- 	}
- 
--	/*
--	 * If the driver supplied a layout by config->layout, the module
--	 * pointer will be NULL and nvmem_layout_put() will be a noop.
--	 */
--	nvmem->layout = config->layout ?: nvmem_layout_get(nvmem);
--	if (IS_ERR(nvmem->layout)) {
--		rval = PTR_ERR(nvmem->layout);
--		nvmem->layout = NULL;
--
--		if (rval == -EPROBE_DEFER)
--			goto err_teardown_compat;
--	}
--
- 	if (config->cells) {
- 		rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
- 		if (rval)
-@@ -983,24 +892,24 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_cells;
- 
--	rval = nvmem_add_cells_from_layout(nvmem);
--	if (rval)
--		goto err_remove_cells;
--
- 	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
- 
- 	rval = device_add(&nvmem->dev);
- 	if (rval)
- 		goto err_remove_cells;
- 
-+	rval = nvmem_populate_layout(nvmem);
-+	if (rval)
-+		goto err_remove_dev;
-+
- 	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
- 
- 	return nvmem;
- 
-+err_remove_dev:
-+	device_del(&nvmem->dev);
- err_remove_cells:
- 	nvmem_device_remove_all_cells(nvmem);
--	nvmem_layout_put(nvmem->layout);
--err_teardown_compat:
- 	if (config->compat)
- 		nvmem_sysfs_remove_compat(nvmem, config);
- err_put_device:
-@@ -1022,7 +931,7 @@ static void nvmem_device_release(struct
- 		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
- 
- 	nvmem_device_remove_all_cells(nvmem);
--	nvmem_layout_put(nvmem->layout);
-+	nvmem_destroy_layout(nvmem);
- 	device_unregister(&nvmem->dev);
- }
- 
-@@ -1324,6 +1233,12 @@ nvmem_cell_get_from_lookup(struct device
- 	return cell;
- }
- 
-+static void nvmem_layout_module_put(struct nvmem_device *nvmem)
-+{
-+	if (nvmem->layout && nvmem->layout->dev.driver)
-+		module_put(nvmem->layout->dev.driver->owner);
-+}
-+
- #if IS_ENABLED(CONFIG_OF)
- static struct nvmem_cell_entry *
- nvmem_find_cell_entry_by_node(struct nvmem_device *nvmem, struct device_node *np)
-@@ -1342,6 +1257,18 @@ nvmem_find_cell_entry_by_node(struct nvm
- 	return cell;
- }
- 
-+static int nvmem_layout_module_get_optional(struct nvmem_device *nvmem)
-+{
-+	if (!nvmem->layout)
-+		return 0;
-+
-+	if (!nvmem->layout->dev.driver ||
-+	    !try_module_get(nvmem->layout->dev.driver->owner))
-+		return -EPROBE_DEFER;
-+
-+	return 0;
-+}
-+
- /**
-  * of_nvmem_cell_get() - Get a nvmem cell from given device node and cell id
-  *
-@@ -1404,16 +1331,29 @@ struct nvmem_cell *of_nvmem_cell_get(str
- 		return ERR_CAST(nvmem);
- 	}
- 
-+	ret = nvmem_layout_module_get_optional(nvmem);
-+	if (ret) {
-+		of_node_put(cell_np);
-+		__nvmem_device_put(nvmem);
-+		return ERR_PTR(ret);
-+	}
-+
- 	cell_entry = nvmem_find_cell_entry_by_node(nvmem, cell_np);
- 	of_node_put(cell_np);
- 	if (!cell_entry) {
- 		__nvmem_device_put(nvmem);
--		return ERR_PTR(-ENOENT);
-+		nvmem_layout_module_put(nvmem);
-+		if (nvmem->layout)
-+			return ERR_PTR(-EPROBE_DEFER);
-+		else
-+			return ERR_PTR(-ENOENT);
- 	}
- 
- 	cell = nvmem_create_cell(cell_entry, id, cell_index);
--	if (IS_ERR(cell))
-+	if (IS_ERR(cell)) {
- 		__nvmem_device_put(nvmem);
-+		nvmem_layout_module_put(nvmem);
-+	}
- 
- 	return cell;
- }
-@@ -1527,6 +1467,7 @@ void nvmem_cell_put(struct nvmem_cell *c
- 
- 	kfree(cell);
- 	__nvmem_device_put(nvmem);
-+	nvmem_layout_module_put(nvmem);
- }
- EXPORT_SYMBOL_GPL(nvmem_cell_put);
- 
-@@ -2104,11 +2045,22 @@ EXPORT_SYMBOL_GPL(nvmem_dev_name);
- 
- static int __init nvmem_init(void)
- {
--	return bus_register(&nvmem_bus_type);
-+	int ret;
-+
-+	ret = bus_register(&nvmem_bus_type);
-+	if (ret)
-+		return ret;
-+
-+	ret = nvmem_layout_bus_register();
-+	if (ret)
-+		bus_unregister(&nvmem_bus_type);
-+
-+	return ret;
- }
- 
- static void __exit nvmem_exit(void)
- {
-+	nvmem_layout_bus_unregister();
- 	bus_unregister(&nvmem_bus_type);
- }
- 
---- a/drivers/nvmem/internals.h
-+++ b/drivers/nvmem/internals.h
-@@ -34,4 +34,25 @@ struct nvmem_device {
- 	void *priv;
- };
- 
-+#if IS_ENABLED(CONFIG_OF)
-+int nvmem_layout_bus_register(void);
-+void nvmem_layout_bus_unregister(void);
-+int nvmem_populate_layout(struct nvmem_device *nvmem);
-+void nvmem_destroy_layout(struct nvmem_device *nvmem);
-+#else /* CONFIG_OF */
-+static inline int nvmem_layout_bus_register(void)
-+{
-+	return 0;
-+}
-+
-+static inline void nvmem_layout_bus_unregister(void) {}
-+
-+static inline int nvmem_populate_layout(struct nvmem_device *nvmem)
-+{
-+	return 0;
-+}
-+
-+static inline void nvmem_destroy_layout(struct nvmem_device *nvmem) { }
-+#endif /* CONFIG_OF */
-+
- #endif  /* ifndef _LINUX_NVMEM_INTERNALS_H */
---- /dev/null
-+++ b/drivers/nvmem/layouts.c
-@@ -0,0 +1,201 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * NVMEM layout bus handling
-+ *
-+ * Copyright (C) 2023 Bootlin
-+ * Author: Miquel Raynal <miquel.raynal@bootlin.com
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/of_irq.h>
-+
-+#include "internals.h"
-+
-+#define to_nvmem_layout_driver(drv) \
-+	(container_of((drv), struct nvmem_layout_driver, driver))
-+#define to_nvmem_layout_device(_dev) \
-+	container_of((_dev), struct nvmem_layout, dev)
-+
-+static int nvmem_layout_bus_match(struct device *dev, struct device_driver *drv)
-+{
-+	return of_driver_match_device(dev, drv);
-+}
-+
-+static int nvmem_layout_bus_probe(struct device *dev)
-+{
-+	struct nvmem_layout_driver *drv = to_nvmem_layout_driver(dev->driver);
-+	struct nvmem_layout *layout = to_nvmem_layout_device(dev);
-+
-+	if (!drv->probe || !drv->remove)
-+		return -EINVAL;
-+
-+	return drv->probe(layout);
-+}
-+
-+static void nvmem_layout_bus_remove(struct device *dev)
-+{
-+	struct nvmem_layout_driver *drv = to_nvmem_layout_driver(dev->driver);
-+	struct nvmem_layout *layout = to_nvmem_layout_device(dev);
-+
-+	return drv->remove(layout);
-+}
-+
-+static struct bus_type nvmem_layout_bus_type = {
-+	.name		= "nvmem-layout",
-+	.match		= nvmem_layout_bus_match,
-+	.probe		= nvmem_layout_bus_probe,
-+	.remove		= nvmem_layout_bus_remove,
-+};
-+
-+int nvmem_layout_driver_register(struct nvmem_layout_driver *drv)
-+{
-+	drv->driver.bus = &nvmem_layout_bus_type;
-+
-+	return driver_register(&drv->driver);
-+}
-+EXPORT_SYMBOL_GPL(nvmem_layout_driver_register);
-+
-+void nvmem_layout_driver_unregister(struct nvmem_layout_driver *drv)
-+{
-+	driver_unregister(&drv->driver);
-+}
-+EXPORT_SYMBOL_GPL(nvmem_layout_driver_unregister);
-+
-+static void nvmem_layout_release_device(struct device *dev)
-+{
-+	struct nvmem_layout *layout = to_nvmem_layout_device(dev);
-+
-+	of_node_put(layout->dev.of_node);
-+	kfree(layout);
-+}
-+
-+static int nvmem_layout_create_device(struct nvmem_device *nvmem,
-+				      struct device_node *np)
-+{
-+	struct nvmem_layout *layout;
-+	struct device *dev;
-+	int ret;
-+
-+	layout = kzalloc(sizeof(*layout), GFP_KERNEL);
-+	if (!layout)
-+		return -ENOMEM;
-+
-+	/* Create a bidirectional link */
-+	layout->nvmem = nvmem;
-+	nvmem->layout = layout;
-+
-+	/* Device model registration */
-+	dev = &layout->dev;
-+	device_initialize(dev);
-+	dev->parent = &nvmem->dev;
-+	dev->bus = &nvmem_layout_bus_type;
-+	dev->release = nvmem_layout_release_device;
-+	dev->coherent_dma_mask = DMA_BIT_MASK(32);
-+	dev->dma_mask = &dev->coherent_dma_mask;
-+	device_set_node(dev, of_fwnode_handle(of_node_get(np)));
-+	of_device_make_bus_id(dev);
-+	of_msi_configure(dev, dev->of_node);
-+
-+	ret = device_add(dev);
-+	if (ret) {
-+		put_device(dev);
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id of_nvmem_layout_skip_table[] = {
-+	{ .compatible = "fixed-layout", },
-+	{}
-+};
-+
-+static int nvmem_layout_bus_populate(struct nvmem_device *nvmem,
-+				     struct device_node *layout_dn)
-+{
-+	int ret;
-+
-+	/* Make sure it has a compatible property */
-+	if (!of_get_property(layout_dn, "compatible", NULL)) {
-+		pr_debug("%s() - skipping %pOF, no compatible prop\n",
-+			 __func__, layout_dn);
-+		return 0;
-+	}
-+
-+	/* Fixed layouts are parsed manually somewhere else for now */
-+	if (of_match_node(of_nvmem_layout_skip_table, layout_dn)) {
-+		pr_debug("%s() - skipping %pOF node\n", __func__, layout_dn);
-+		return 0;
-+	}
-+
-+	if (of_node_check_flag(layout_dn, OF_POPULATED_BUS)) {
-+		pr_debug("%s() - skipping %pOF, already populated\n",
-+			 __func__, layout_dn);
-+
-+		return 0;
-+	}
-+
-+	/* NVMEM layout buses expect only a single device representing the layout */
-+	ret = nvmem_layout_create_device(nvmem, layout_dn);
-+	if (ret)
-+		return ret;
-+
-+	of_node_set_flag(layout_dn, OF_POPULATED_BUS);
-+
-+	return 0;
-+}
-+
-+struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
-+{
-+	return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout");
-+}
-+EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container);
-+
-+/*
-+ * Returns the number of devices populated, 0 if the operation was not relevant
-+ * for this nvmem device, an error code otherwise.
-+ */
-+int nvmem_populate_layout(struct nvmem_device *nvmem)
-+{
-+	struct device_node *layout_dn;
-+	int ret;
-+
-+	layout_dn = of_nvmem_layout_get_container(nvmem);
-+	if (!layout_dn)
-+		return 0;
-+
-+	/* Populate the layout device */
-+	device_links_supplier_sync_state_pause();
-+	ret = nvmem_layout_bus_populate(nvmem, layout_dn);
-+	device_links_supplier_sync_state_resume();
-+
-+	of_node_put(layout_dn);
-+	return ret;
-+}
-+
-+void nvmem_destroy_layout(struct nvmem_device *nvmem)
-+{
-+	struct device *dev;
-+
-+	if (!nvmem->layout)
-+		return;
-+
-+	dev = &nvmem->layout->dev;
-+	of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
-+	device_unregister(dev);
-+}
-+
-+int nvmem_layout_bus_register(void)
-+{
-+	return bus_register(&nvmem_layout_bus_type);
-+}
-+
-+void nvmem_layout_bus_unregister(void)
-+{
-+	bus_unregister(&nvmem_layout_bus_type);
-+}
---- a/drivers/nvmem/layouts/Kconfig
-+++ b/drivers/nvmem/layouts/Kconfig
-@@ -1,5 +1,11 @@
- # SPDX-License-Identifier: GPL-2.0
- 
-+config NVMEM_LAYOUTS
-+	bool
-+	depends on OF
-+
-+if NVMEM_LAYOUTS
-+
- menu "Layout Types"
- 
- config NVMEM_LAYOUT_SL28_VPD
-@@ -21,3 +27,5 @@ config NVMEM_LAYOUT_ONIE_TLV
- 	  If unsure, say N.
- 
- endmenu
-+
-+endif
---- a/drivers/nvmem/layouts/onie-tlv.c
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -225,16 +225,32 @@ static int onie_tlv_parse_table(struct d
- 	return 0;
- }
- 
-+static int onie_tlv_probe(struct nvmem_layout *layout)
-+{
-+	layout->add_cells = onie_tlv_parse_table;
-+
-+	return nvmem_layout_register(layout);
-+}
-+
-+static void onie_tlv_remove(struct nvmem_layout *layout)
-+{
-+	nvmem_layout_unregister(layout);
-+}
-+
- static const struct of_device_id onie_tlv_of_match_table[] = {
- 	{ .compatible = "onie,tlv-layout", },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, onie_tlv_of_match_table);
- 
--static struct nvmem_layout onie_tlv_layout = {
--	.name = "ONIE tlv layout",
--	.of_match_table = onie_tlv_of_match_table,
--	.add_cells = onie_tlv_parse_table,
-+static struct nvmem_layout_driver onie_tlv_layout = {
-+	.driver = {
-+		.owner = THIS_MODULE,
-+		.name = "onie-tlv-layout",
-+		.of_match_table = onie_tlv_of_match_table,
-+	},
-+	.probe = onie_tlv_probe,
-+	.remove = onie_tlv_remove,
- };
- module_nvmem_layout_driver(onie_tlv_layout);
- 
---- a/drivers/nvmem/layouts/sl28vpd.c
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -134,16 +134,32 @@ static int sl28vpd_add_cells(struct devi
- 	return 0;
- }
- 
-+static int sl28vpd_probe(struct nvmem_layout *layout)
-+{
-+	layout->add_cells = sl28vpd_add_cells;
-+
-+	return nvmem_layout_register(layout);
-+}
-+
-+static void sl28vpd_remove(struct nvmem_layout *layout)
-+{
-+	nvmem_layout_unregister(layout);
-+}
-+
- static const struct of_device_id sl28vpd_of_match_table[] = {
- 	{ .compatible = "kontron,sl28-vpd" },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, sl28vpd_of_match_table);
- 
--static struct nvmem_layout sl28vpd_layout = {
--	.name = "sl28-vpd",
--	.of_match_table = sl28vpd_of_match_table,
--	.add_cells = sl28vpd_add_cells,
-+static struct nvmem_layout_driver sl28vpd_layout = {
-+	.driver = {
-+		.owner = THIS_MODULE,
-+		.name = "kontron-sl28vpd-layout",
-+		.of_match_table = sl28vpd_of_match_table,
-+	},
-+	.probe = sl28vpd_probe,
-+	.remove = sl28vpd_remove,
- };
- module_nvmem_layout_driver(sl28vpd_layout);
- 
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -9,6 +9,7 @@
- #ifndef _LINUX_NVMEM_PROVIDER_H
- #define _LINUX_NVMEM_PROVIDER_H
- 
-+#include <linux/device.h>
- #include <linux/device/driver.h>
- #include <linux/err.h>
- #include <linux/errno.h>
-@@ -158,12 +159,11 @@ struct nvmem_cell_table {
- /**
-  * struct nvmem_layout - NVMEM layout definitions
-  *
-- * @name:		Layout name.
-- * @of_match_table:	Open firmware match table.
-- * @add_cells:		Called to populate the layout using
-- *			nvmem_add_one_cell().
-- * @owner:		Pointer to struct module.
-- * @node:		List node.
-+ * @dev:		Device-model layout device.
-+ * @nvmem:		The underlying NVMEM device
-+ * @add_cells:		Will be called if a nvmem device is found which
-+ *			has this layout. The function will add layout
-+ *			specific cells with nvmem_add_one_cell().
-  *
-  * A nvmem device can hold a well defined structure which can just be
-  * evaluated during runtime. For example a TLV list, or a list of "name=val"
-@@ -171,13 +171,15 @@ struct nvmem_cell_table {
-  * cells.
-  */
- struct nvmem_layout {
--	const char *name;
--	const struct of_device_id *of_match_table;
-+	struct device dev;
-+	struct nvmem_device *nvmem;
- 	int (*add_cells)(struct device *dev, struct nvmem_device *nvmem);
-+};
- 
--	/* private */
--	struct module *owner;
--	struct list_head node;
-+struct nvmem_layout_driver {
-+	struct device_driver driver;
-+	int (*probe)(struct nvmem_layout *layout);
-+	void (*remove)(struct nvmem_layout *layout);
- };
- 
- #if IS_ENABLED(CONFIG_NVMEM)
-@@ -194,11 +196,15 @@ void nvmem_del_cell_table(struct nvmem_c
- int nvmem_add_one_cell(struct nvmem_device *nvmem,
- 		       const struct nvmem_cell_info *info);
- 
--int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner);
--#define nvmem_layout_register(layout) \
--	__nvmem_layout_register(layout, THIS_MODULE)
-+int nvmem_layout_register(struct nvmem_layout *layout);
- void nvmem_layout_unregister(struct nvmem_layout *layout);
- 
-+int nvmem_layout_driver_register(struct nvmem_layout_driver *drv);
-+void nvmem_layout_driver_unregister(struct nvmem_layout_driver *drv);
-+#define module_nvmem_layout_driver(__nvmem_layout_driver)		\
-+	module_driver(__nvmem_layout_driver, nvmem_layout_driver_register, \
-+		      nvmem_layout_driver_unregister)
-+
- const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
- 					struct nvmem_layout *layout);
- 
-@@ -262,8 +268,4 @@ static inline struct device_node *of_nvm
- 
- #endif /* CONFIG_NVMEM && CONFIG_OF */
- 
--#define module_nvmem_layout_driver(__layout_driver)		\
--	module_driver(__layout_driver, nvmem_layout_register,	\
--		      nvmem_layout_unregister)
--
- #endif  /* ifndef _LINUX_NVMEM_PROVIDER_H */
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0006-nvmem-core-Expose-cells-through-sysfs.patch b/target/linux/generic/backport-6.1/819-v6.8-0006-nvmem-core-Expose-cells-through-sysfs.patch
deleted file mode 100644
index 07e44d7b21cd..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0006-nvmem-core-Expose-cells-through-sysfs.patch
+++ /dev/null
@@ -1,240 +0,0 @@
-From 0331c611949fffdf486652450901a4dc52bc5cca Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Fri, 15 Dec 2023 11:15:34 +0000
-Subject: [PATCH] nvmem: core: Expose cells through sysfs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The binary content of nvmem devices is available to the user so in the
-easiest cases, finding the content of a cell is rather easy as it is
-just a matter of looking at a known and fixed offset. However, nvmem
-layouts have been recently introduced to cope with more advanced
-situations, where the offset and size of the cells is not known in
-advance or is dynamic. When using layouts, more advanced parsers are
-used by the kernel in order to give direct access to the content of each
-cell, regardless of its position/size in the underlying
-device. Unfortunately, these information are not accessible by users,
-unless by fully re-implementing the parser logic in userland.
-
-Let's expose the cells and their content through sysfs to avoid these
-situations. Of course the relevant NVMEM sysfs Kconfig option must be
-enabled for this support to be available.
-
-Not all nvmem devices expose cells. Indeed, the .bin_attrs attribute
-group member will be filled at runtime only when relevant and will
-remain empty otherwise. In this case, as the cells attribute group will
-be empty, it will not lead to any additional folder/file creation.
-
-Exposed cells are read-only. There is, in practice, everything in the
-core to support a write path, but as I don't see any need for that, I
-prefer to keep the interface simple (and probably safer). The interface
-is documented as being in the "testing" state which means we can later
-add a write attribute if though relevant.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Tested-by: Rafał Miłecki <rafal@milecki.pl>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231215111536.316972-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c      | 135 +++++++++++++++++++++++++++++++++++++-
- drivers/nvmem/internals.h |   1 +
- 2 files changed, 135 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -300,6 +300,43 @@ static umode_t nvmem_bin_attr_is_visible
- 	return nvmem_bin_attr_get_umode(nvmem);
- }
- 
-+static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
-+					    const char *id, int index);
-+
-+static ssize_t nvmem_cell_attr_read(struct file *filp, struct kobject *kobj,
-+				    struct bin_attribute *attr, char *buf,
-+				    loff_t pos, size_t count)
-+{
-+	struct nvmem_cell_entry *entry;
-+	struct nvmem_cell *cell = NULL;
-+	size_t cell_sz, read_len;
-+	void *content;
-+
-+	entry = attr->private;
-+	cell = nvmem_create_cell(entry, entry->name, 0);
-+	if (IS_ERR(cell))
-+		return PTR_ERR(cell);
-+
-+	if (!cell)
-+		return -EINVAL;
-+
-+	content = nvmem_cell_read(cell, &cell_sz);
-+	if (IS_ERR(content)) {
-+		read_len = PTR_ERR(content);
-+		goto destroy_cell;
-+	}
-+
-+	read_len = min_t(unsigned int, cell_sz - pos, count);
-+	memcpy(buf, content + pos, read_len);
-+	kfree(content);
-+
-+destroy_cell:
-+	kfree_const(cell->id);
-+	kfree(cell);
-+
-+	return read_len;
-+}
-+
- /* default read/write permissions */
- static struct bin_attribute bin_attr_rw_nvmem = {
- 	.attr	= {
-@@ -321,11 +358,21 @@ static const struct attribute_group nvme
- 	.is_bin_visible = nvmem_bin_attr_is_visible,
- };
- 
-+/* Cell attributes will be dynamically allocated */
-+static struct attribute_group nvmem_cells_group = {
-+	.name		= "cells",
-+};
-+
- static const struct attribute_group *nvmem_dev_groups[] = {
- 	&nvmem_bin_group,
- 	NULL,
- };
- 
-+static const struct attribute_group *nvmem_cells_groups[] = {
-+	&nvmem_cells_group,
-+	NULL,
-+};
-+
- static struct bin_attribute bin_attr_nvmem_eeprom_compat = {
- 	.attr	= {
- 		.name	= "eeprom",
-@@ -380,6 +427,68 @@ static void nvmem_sysfs_remove_compat(st
- 		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
- }
- 
-+static int nvmem_populate_sysfs_cells(struct nvmem_device *nvmem)
-+{
-+	struct bin_attribute **cells_attrs, *attrs;
-+	struct nvmem_cell_entry *entry;
-+	unsigned int ncells = 0, i = 0;
-+	int ret = 0;
-+
-+	mutex_lock(&nvmem_mutex);
-+
-+	if (list_empty(&nvmem->cells) || nvmem->sysfs_cells_populated) {
-+		nvmem_cells_group.bin_attrs = NULL;
-+		goto unlock_mutex;
-+	}
-+
-+	/* Allocate an array of attributes with a sentinel */
-+	ncells = list_count_nodes(&nvmem->cells);
-+	cells_attrs = devm_kcalloc(&nvmem->dev, ncells + 1,
-+				   sizeof(struct bin_attribute *), GFP_KERNEL);
-+	if (!cells_attrs) {
-+		ret = -ENOMEM;
-+		goto unlock_mutex;
-+	}
-+
-+	attrs = devm_kcalloc(&nvmem->dev, ncells, sizeof(struct bin_attribute), GFP_KERNEL);
-+	if (!attrs) {
-+		ret = -ENOMEM;
-+		goto unlock_mutex;
-+	}
-+
-+	/* Initialize each attribute to take the name and size of the cell */
-+	list_for_each_entry(entry, &nvmem->cells, node) {
-+		sysfs_bin_attr_init(&attrs[i]);
-+		attrs[i].attr.name = devm_kasprintf(&nvmem->dev, GFP_KERNEL,
-+						    "%s@%x", entry->name,
-+						    entry->offset);
-+		attrs[i].attr.mode = 0444;
-+		attrs[i].size = entry->bytes;
-+		attrs[i].read = &nvmem_cell_attr_read;
-+		attrs[i].private = entry;
-+		if (!attrs[i].attr.name) {
-+			ret = -ENOMEM;
-+			goto unlock_mutex;
-+		}
-+
-+		cells_attrs[i] = &attrs[i];
-+		i++;
-+	}
-+
-+	nvmem_cells_group.bin_attrs = cells_attrs;
-+
-+	ret = devm_device_add_groups(&nvmem->dev, nvmem_cells_groups);
-+	if (ret)
-+		goto unlock_mutex;
-+
-+	nvmem->sysfs_cells_populated = true;
-+
-+unlock_mutex:
-+	mutex_unlock(&nvmem_mutex);
-+
-+	return ret;
-+}
-+
- #else /* CONFIG_NVMEM_SYSFS */
- 
- static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
-@@ -739,11 +848,25 @@ static int nvmem_add_cells_from_fixed_la
- 
- int nvmem_layout_register(struct nvmem_layout *layout)
- {
-+	int ret;
-+
- 	if (!layout->add_cells)
- 		return -EINVAL;
- 
- 	/* Populate the cells */
--	return layout->add_cells(&layout->nvmem->dev, layout->nvmem);
-+	ret = layout->add_cells(&layout->nvmem->dev, layout->nvmem);
-+	if (ret)
-+		return ret;
-+
-+#ifdef CONFIG_NVMEM_SYSFS
-+	ret = nvmem_populate_sysfs_cells(layout->nvmem);
-+	if (ret) {
-+		nvmem_device_remove_all_cells(layout->nvmem);
-+		return ret;
-+	}
-+#endif
-+
-+	return 0;
- }
- EXPORT_SYMBOL_GPL(nvmem_layout_register);
- 
-@@ -902,10 +1025,20 @@ struct nvmem_device *nvmem_register(cons
- 	if (rval)
- 		goto err_remove_dev;
- 
-+#ifdef CONFIG_NVMEM_SYSFS
-+	rval = nvmem_populate_sysfs_cells(nvmem);
-+	if (rval)
-+		goto err_destroy_layout;
-+#endif
-+
- 	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
- 
- 	return nvmem;
- 
-+#ifdef CONFIG_NVMEM_SYSFS
-+err_destroy_layout:
-+	nvmem_destroy_layout(nvmem);
-+#endif
- err_remove_dev:
- 	device_del(&nvmem->dev);
- err_remove_cells:
---- a/drivers/nvmem/internals.h
-+++ b/drivers/nvmem/internals.h
-@@ -32,6 +32,7 @@ struct nvmem_device {
- 	struct gpio_desc	*wp_gpio;
- 	struct nvmem_layout	*layout;
- 	void *priv;
-+	bool			sysfs_cells_populated;
- };
- 
- #if IS_ENABLED(CONFIG_OF)
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0007-nvmem-stm32-add-support-for-STM32MP25-BSEC-to-contro.patch b/target/linux/generic/backport-6.1/819-v6.8-0007-nvmem-stm32-add-support-for-STM32MP25-BSEC-to-contro.patch
deleted file mode 100644
index f686222f8810..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0007-nvmem-stm32-add-support-for-STM32MP25-BSEC-to-contro.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From f0ac5b23039610619ca4a4805528553ecb6bc815 Mon Sep 17 00:00:00 2001
-From: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Date: Fri, 15 Dec 2023 11:15:36 +0000
-Subject: [PATCH] nvmem: stm32: add support for STM32MP25 BSEC to control OTP
- data
-
-On STM32MP25, OTP area may be read/written by using BSEC (boot, security
-and OTP control). The BSEC internal peripheral is only managed by the
-secure world.
-
-The 12 Kbits of OTP (effective) are organized into the following regions:
-- lower OTP (OTP0 to OTP127) = 4096 lower OTP bits,
-  bitwise (1-bit) programmable
-- mid OTP (OTP128 to OTP255) = 4096 middle OTP bits,
-  bulk (32-bit) programmable
-- upper OTP (OTP256 to OTP383) = 4096 upper OTP bits,
-  bulk (32-bit) programmable,
-  only accessible when BSEC is in closed state.
-
-As HWKEY and ECIES key are only accessible by ROM code;
-only 368 OTP words are managed in this driver (OTP0 to OTP267).
-
-This patch adds the STM32MP25 configuration for reading and writing
-the OTP data using the OP-TEE BSEC TA services.
-
-Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20231215111536.316972-11-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/stm32-romem.c | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/drivers/nvmem/stm32-romem.c
-+++ b/drivers/nvmem/stm32-romem.c
-@@ -269,6 +269,19 @@ static const struct stm32_romem_cfg stm3
- 	.ta = true,
- };
- 
-+/*
-+ * STM32MP25 BSEC OTP: 3 regions of 32-bits data words
-+ *   lower OTP (OTP0 to OTP127), bitwise (1-bit) programmable
-+ *   mid OTP (OTP128 to OTP255), bulk (32-bit) programmable
-+ *   upper OTP (OTP256 to OTP383), bulk (32-bit) programmable
-+ *              but no access to HWKEY and ECIES key: limited at OTP367
-+ */
-+static const struct stm32_romem_cfg stm32mp25_bsec_cfg = {
-+	.size = 368 * 4,
-+	.lower = 127,
-+	.ta = true,
-+};
-+
- static const struct of_device_id stm32_romem_of_match[] __maybe_unused = {
- 	{ .compatible = "st,stm32f4-otp", }, {
- 		.compatible = "st,stm32mp15-bsec",
-@@ -276,6 +289,9 @@ static const struct of_device_id stm32_r
- 	}, {
- 		.compatible = "st,stm32mp13-bsec",
- 		.data = (void *)&stm32mp13_bsec_cfg,
-+	}, {
-+		.compatible = "st,stm32mp25-bsec",
-+		.data = (void *)&stm32mp25_bsec_cfg,
- 	},
- 	{ /* sentinel */ },
- };
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0008-nvmem-layouts-refactor-.add_cells-callback-arguments.patch b/target/linux/generic/backport-6.1/819-v6.8-0008-nvmem-layouts-refactor-.add_cells-callback-arguments.patch
deleted file mode 100644
index 400004c617cb..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0008-nvmem-layouts-refactor-.add_cells-callback-arguments.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 401df0d4f4098ecc9c5278da2f50756d62e5b37d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 19 Dec 2023 13:01:03 +0100
-Subject: [PATCH] nvmem: layouts: refactor .add_cells() callback arguments
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Simply pass whole "struct nvmem_layout" instead of single variables.
-There is nothing in "struct nvmem_layout" that we have to hide from
-layout drivers. They also access it during .probe() and .remove().
-
-Thanks to this change:
-
-1. API gets more consistent
-   All layouts drivers callbacks get the same argument
-
-2. Layouts get correct device
-   Before this change NVMEM core code was passing NVMEM device instead
-   of layout device. That resulted in:
-   * Confusing prints
-   * Calling devm_*() helpers on wrong device
-   * Helpers like of_device_get_match_data() dereferencing NULLs
-
-3. It gets possible to get match data
-   First of all nvmem_layout_get_match_data() requires passing "struct
-   nvmem_layout" which .add_cells() callback didn't have before this. It
-   doesn't matter much as it's rather useless now anyway (and will be
-   dropped).
-   What's more important however is that of_device_get_match_data() can
-   be used now thanks to owning a proper device pointer.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Michael Walle <michael@walle.cc>
-Link: https://lore.kernel.org/r/20231219120104.3422-1-zajec5@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c             | 2 +-
- drivers/nvmem/layouts/onie-tlv.c | 4 +++-
- drivers/nvmem/layouts/sl28vpd.c  | 4 +++-
- include/linux/nvmem-provider.h   | 2 +-
- 4 files changed, 8 insertions(+), 4 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -854,7 +854,7 @@ int nvmem_layout_register(struct nvmem_l
- 		return -EINVAL;
- 
- 	/* Populate the cells */
--	ret = layout->add_cells(&layout->nvmem->dev, layout->nvmem);
-+	ret = layout->add_cells(layout);
- 	if (ret)
- 		return ret;
- 
---- a/drivers/nvmem/layouts/onie-tlv.c
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -182,8 +182,10 @@ static bool onie_tlv_crc_is_valid(struct
- 	return true;
- }
- 
--static int onie_tlv_parse_table(struct device *dev, struct nvmem_device *nvmem)
-+static int onie_tlv_parse_table(struct nvmem_layout *layout)
- {
-+	struct nvmem_device *nvmem = layout->nvmem;
-+	struct device *dev = &layout->dev;
- 	struct onie_tlv_hdr hdr;
- 	size_t table_len, data_len, hdr_len;
- 	u8 *table, *data;
---- a/drivers/nvmem/layouts/sl28vpd.c
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -80,8 +80,10 @@ static int sl28vpd_v1_check_crc(struct d
- 	return 0;
- }
- 
--static int sl28vpd_add_cells(struct device *dev, struct nvmem_device *nvmem)
-+static int sl28vpd_add_cells(struct nvmem_layout *layout)
- {
-+	struct nvmem_device *nvmem = layout->nvmem;
-+	struct device *dev = &layout->dev;
- 	const struct nvmem_cell_info *pinfo;
- 	struct nvmem_cell_info info = {0};
- 	struct device_node *layout_np;
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -173,7 +173,7 @@ struct nvmem_cell_table {
- struct nvmem_layout {
- 	struct device dev;
- 	struct nvmem_device *nvmem;
--	int (*add_cells)(struct device *dev, struct nvmem_device *nvmem);
-+	int (*add_cells)(struct nvmem_layout *layout);
- };
- 
- struct nvmem_layout_driver {
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0009-nvmem-drop-nvmem_layout_get_match_data.patch b/target/linux/generic/backport-6.1/819-v6.8-0009-nvmem-drop-nvmem_layout_get_match_data.patch
deleted file mode 100644
index 510f3dd84174..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0009-nvmem-drop-nvmem_layout_get_match_data.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 43f60e3fb62edc7bd8891de8779fb422f4ae23ae Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 19 Dec 2023 13:01:04 +0100
-Subject: [PATCH] nvmem: drop nvmem_layout_get_match_data()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Thanks for layouts refactoring we now have "struct device" associated
-with layout. Also its OF pointer points directly to the "nvmem-layout"
-DT node.
-
-All it takes to get match data is a generic of_device_get_match_data().
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Michael Walle <michael@walle.cc>
-Link: https://lore.kernel.org/r/20231219120104.3422-2-zajec5@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 13 -------------
- include/linux/nvmem-provider.h | 10 ----------
- 2 files changed, 23 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -876,19 +876,6 @@ void nvmem_layout_unregister(struct nvme
- }
- EXPORT_SYMBOL_GPL(nvmem_layout_unregister);
- 
--const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
--					struct nvmem_layout *layout)
--{
--	struct device_node __maybe_unused *layout_np;
--	const struct of_device_id *match;
--
--	layout_np = of_nvmem_layout_get_container(nvmem);
--	match = of_match_node(layout->dev.driver->of_match_table, layout_np);
--
--	return match ? match->data : NULL;
--}
--EXPORT_SYMBOL_GPL(nvmem_layout_get_match_data);
--
- /**
-  * nvmem_register() - Register a nvmem device for given nvmem_config.
-  * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -205,9 +205,6 @@ void nvmem_layout_driver_unregister(stru
- 	module_driver(__nvmem_layout_driver, nvmem_layout_driver_register, \
- 		      nvmem_layout_driver_unregister)
- 
--const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
--					struct nvmem_layout *layout);
--
- #else
- 
- static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c)
-@@ -238,13 +235,6 @@ static inline int nvmem_layout_register(
- 
- static inline void nvmem_layout_unregister(struct nvmem_layout *layout) {}
- 
--static inline const void *
--nvmem_layout_get_match_data(struct nvmem_device *nvmem,
--			    struct nvmem_layout *layout)
--{
--	return NULL;
--}
--
- #endif /* CONFIG_NVMEM */
- 
- #if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF)
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0010-nvmem-core-add-nvmem_dev_size-helper.patch b/target/linux/generic/backport-6.1/819-v6.8-0010-nvmem-core-add-nvmem_dev_size-helper.patch
deleted file mode 100644
index ccdcc09736d8..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0010-nvmem-core-add-nvmem_dev_size-helper.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 33cf42e68efc8ff529a7eee08a4f0ba8c8d0a207 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 21 Dec 2023 18:34:17 +0100
-Subject: [PATCH] nvmem: core: add nvmem_dev_size() helper
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is required by layouts that need to read whole NVMEM content. It's
-especially useful for NVMEM devices without hardcoded layout (like
-U-Boot environment data block).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/r/20231221173421.13737-2-zajec5@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c           | 13 +++++++++++++
- include/linux/nvmem-consumer.h |  1 +
- 2 files changed, 14 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -2163,6 +2163,19 @@ const char *nvmem_dev_name(struct nvmem_
- }
- EXPORT_SYMBOL_GPL(nvmem_dev_name);
- 
-+/**
-+ * nvmem_dev_size() - Get the size of a given nvmem device.
-+ *
-+ * @nvmem: nvmem device.
-+ *
-+ * Return: size of the nvmem device.
-+ */
-+size_t nvmem_dev_size(struct nvmem_device *nvmem)
-+{
-+	return nvmem->size;
-+}
-+EXPORT_SYMBOL_GPL(nvmem_dev_size);
-+
- static int __init nvmem_init(void)
- {
- 	int ret;
---- a/include/linux/nvmem-consumer.h
-+++ b/include/linux/nvmem-consumer.h
-@@ -81,6 +81,7 @@ int nvmem_device_cell_write(struct nvmem
- 			    struct nvmem_cell_info *info, void *buf);
- 
- const char *nvmem_dev_name(struct nvmem_device *nvmem);
-+size_t nvmem_dev_size(struct nvmem_device *nvmem);
- 
- void nvmem_add_cell_lookups(struct nvmem_cell_lookup *entries,
- 			    size_t nentries);
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0011-nvmem-u-boot-env-use-nvmem_add_one_cell-nvmem-subsys.patch b/target/linux/generic/backport-6.1/819-v6.8-0011-nvmem-u-boot-env-use-nvmem_add_one_cell-nvmem-subsys.patch
deleted file mode 100644
index fc826f3f7e4e..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0011-nvmem-u-boot-env-use-nvmem_add_one_cell-nvmem-subsys.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From 7c8979b42b1a9c5604f431ba804928e55919263c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 21 Dec 2023 18:34:18 +0100
-Subject: [PATCH] nvmem: u-boot-env: use nvmem_add_one_cell() nvmem subsystem
- helper
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Simplify adding NVMEM cells.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/r/20231221173421.13737-3-zajec5@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/u-boot-env.c | 55 +++++++++++++++-----------------------
- 1 file changed, 21 insertions(+), 34 deletions(-)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -23,13 +23,10 @@ enum u_boot_env_format {
- 
- struct u_boot_env {
- 	struct device *dev;
-+	struct nvmem_device *nvmem;
- 	enum u_boot_env_format format;
- 
- 	struct mtd_info *mtd;
--
--	/* Cells */
--	struct nvmem_cell_info *cells;
--	int ncells;
- };
- 
- struct u_boot_env_image_single {
-@@ -94,43 +91,36 @@ static int u_boot_env_read_post_process_
- static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
- 				size_t data_offset, size_t data_len)
- {
-+	struct nvmem_device *nvmem = priv->nvmem;
- 	struct device *dev = priv->dev;
- 	char *data = buf + data_offset;
- 	char *var, *value, *eq;
--	int idx;
--
--	priv->ncells = 0;
--	for (var = data; var < data + data_len && *var; var += strlen(var) + 1)
--		priv->ncells++;
--
--	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
--	if (!priv->cells)
--		return -ENOMEM;
- 
--	for (var = data, idx = 0;
-+	for (var = data;
- 	     var < data + data_len && *var;
--	     var = value + strlen(value) + 1, idx++) {
-+	     var = value + strlen(value) + 1) {
-+		struct nvmem_cell_info info = {};
-+
- 		eq = strchr(var, '=');
- 		if (!eq)
- 			break;
- 		*eq = '\0';
- 		value = eq + 1;
- 
--		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
--		if (!priv->cells[idx].name)
-+		info.name = devm_kstrdup(dev, var, GFP_KERNEL);
-+		if (!info.name)
- 			return -ENOMEM;
--		priv->cells[idx].offset = data_offset + value - data;
--		priv->cells[idx].bytes = strlen(value);
--		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
-+		info.offset = data_offset + value - data;
-+		info.bytes = strlen(value);
-+		info.np = of_get_child_by_name(dev->of_node, info.name);
- 		if (!strcmp(var, "ethaddr")) {
--			priv->cells[idx].raw_len = strlen(value);
--			priv->cells[idx].bytes = ETH_ALEN;
--			priv->cells[idx].read_post_process = u_boot_env_read_post_process_ethaddr;
-+			info.raw_len = strlen(value);
-+			info.bytes = ETH_ALEN;
-+			info.read_post_process = u_boot_env_read_post_process_ethaddr;
- 		}
--	}
- 
--	if (WARN_ON(idx != priv->ncells))
--		priv->ncells = idx;
-+		nvmem_add_one_cell(nvmem, &info);
-+	}
- 
- 	return 0;
- }
-@@ -209,7 +199,6 @@ static int u_boot_env_probe(struct platf
- 	struct device *dev = &pdev->dev;
- 	struct device_node *np = dev->of_node;
- 	struct u_boot_env *priv;
--	int err;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -224,17 +213,15 @@ static int u_boot_env_probe(struct platf
- 		return PTR_ERR(priv->mtd);
- 	}
- 
--	err = u_boot_env_parse(priv);
--	if (err)
--		return err;
--
- 	config.dev = dev;
--	config.cells = priv->cells;
--	config.ncells = priv->ncells;
- 	config.priv = priv;
- 	config.size = priv->mtd->size;
- 
--	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
-+	priv->nvmem = devm_nvmem_register(dev, &config);
-+	if (IS_ERR(priv->nvmem))
-+		return PTR_ERR(priv->nvmem);
-+
-+	return u_boot_env_parse(priv);
- }
- 
- static const struct of_device_id u_boot_env_of_match_table[] = {
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0012-nvmem-u-boot-env-use-nvmem-device-helpers.patch b/target/linux/generic/backport-6.1/819-v6.8-0012-nvmem-u-boot-env-use-nvmem-device-helpers.patch
deleted file mode 100644
index 70abc7cf1439..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0012-nvmem-u-boot-env-use-nvmem-device-helpers.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From a832556d23c5a11115f300011a5874d6107a0d62 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 21 Dec 2023 18:34:19 +0100
-Subject: [PATCH] nvmem: u-boot-env: use nvmem device helpers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use nvmem_dev_size() and nvmem_device_read() to make this driver less
-mtd dependent.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/r/20231221173421.13737-4-zajec5@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/u-boot-env.c | 23 +++++++++++++++--------
- 1 file changed, 15 insertions(+), 8 deletions(-)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -127,27 +127,34 @@ static int u_boot_env_add_cells(struct u
- 
- static int u_boot_env_parse(struct u_boot_env *priv)
- {
-+	struct nvmem_device *nvmem = priv->nvmem;
- 	struct device *dev = priv->dev;
- 	size_t crc32_data_offset;
- 	size_t crc32_data_len;
- 	size_t crc32_offset;
- 	size_t data_offset;
- 	size_t data_len;
-+	size_t dev_size;
- 	uint32_t crc32;
- 	uint32_t calc;
--	size_t bytes;
- 	uint8_t *buf;
-+	int bytes;
- 	int err;
- 
--	buf = kcalloc(1, priv->mtd->size, GFP_KERNEL);
-+	dev_size = nvmem_dev_size(nvmem);
-+
-+	buf = kcalloc(1, dev_size, GFP_KERNEL);
- 	if (!buf) {
- 		err = -ENOMEM;
- 		goto err_out;
- 	}
- 
--	err = mtd_read(priv->mtd, 0, priv->mtd->size, &bytes, buf);
--	if ((err && !mtd_is_bitflip(err)) || bytes != priv->mtd->size) {
--		dev_err(dev, "Failed to read from mtd: %d\n", err);
-+	bytes = nvmem_device_read(nvmem, 0, dev_size, buf);
-+	if (bytes < 0) {
-+		err = bytes;
-+		goto err_kfree;
-+	} else if (bytes != dev_size) {
-+		err = -EIO;
- 		goto err_kfree;
- 	}
- 
-@@ -169,8 +176,8 @@ static int u_boot_env_parse(struct u_boo
- 		break;
- 	}
- 	crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
--	crc32_data_len = priv->mtd->size - crc32_data_offset;
--	data_len = priv->mtd->size - data_offset;
-+	crc32_data_len = dev_size - crc32_data_offset;
-+	data_len = dev_size - data_offset;
- 
- 	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
- 	if (calc != crc32) {
-@@ -179,7 +186,7 @@ static int u_boot_env_parse(struct u_boo
- 		goto err_kfree;
- 	}
- 
--	buf[priv->mtd->size - 1] = '\0';
-+	buf[dev_size - 1] = '\0';
- 	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
- 	if (err)
- 		dev_err(dev, "Failed to add cells: %d\n", err);
diff --git a/target/linux/generic/backport-6.1/819-v6.8-0013-nvmem-u-boot-env-improve-coding-style.patch b/target/linux/generic/backport-6.1/819-v6.8-0013-nvmem-u-boot-env-improve-coding-style.patch
deleted file mode 100644
index 273cfed8743c..000000000000
--- a/target/linux/generic/backport-6.1/819-v6.8-0013-nvmem-u-boot-env-improve-coding-style.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 6bafe07c930676d6430be471310958070816a595 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 21 Dec 2023 18:34:20 +0100
-Subject: [PATCH] nvmem: u-boot-env: improve coding style
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Prefer kzalloc() over kcalloc()
-   See memory-allocation.rst which says: "to be on the safe side it's
-   best to use routines that set memory to zero, like kzalloc()"
-2. Drop dev_err() for u_boot_env_add_cells() fail
-   It can fail only on -ENOMEM. We don't want to print error then.
-3. Add extra "crc32_addr" variable
-   It makes code reading header's crc32 easier to understand / review.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/r/20231221173421.13737-5-zajec5@gmail.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/u-boot-env.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -132,6 +132,7 @@ static int u_boot_env_parse(struct u_boo
- 	size_t crc32_data_offset;
- 	size_t crc32_data_len;
- 	size_t crc32_offset;
-+	__le32 *crc32_addr;
- 	size_t data_offset;
- 	size_t data_len;
- 	size_t dev_size;
-@@ -143,7 +144,7 @@ static int u_boot_env_parse(struct u_boo
- 
- 	dev_size = nvmem_dev_size(nvmem);
- 
--	buf = kcalloc(1, dev_size, GFP_KERNEL);
-+	buf = kzalloc(dev_size, GFP_KERNEL);
- 	if (!buf) {
- 		err = -ENOMEM;
- 		goto err_out;
-@@ -175,7 +176,8 @@ static int u_boot_env_parse(struct u_boo
- 		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
- 		break;
- 	}
--	crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
-+	crc32_addr = (__le32 *)(buf + crc32_offset);
-+	crc32 = le32_to_cpu(*crc32_addr);
- 	crc32_data_len = dev_size - crc32_data_offset;
- 	data_len = dev_size - data_offset;
- 
-@@ -188,8 +190,6 @@ static int u_boot_env_parse(struct u_boo
- 
- 	buf[dev_size - 1] = '\0';
- 	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
--	if (err)
--		dev_err(dev, "Failed to add cells: %d\n", err);
- 
- err_kfree:
- 	kfree(buf);
diff --git a/target/linux/generic/backport-6.1/820-v6.4-net-phy-fix-circular-LEDS_CLASS-dependencies.patch b/target/linux/generic/backport-6.1/820-v6.4-net-phy-fix-circular-LEDS_CLASS-dependencies.patch
deleted file mode 100644
index 3b68403690c6..000000000000
--- a/target/linux/generic/backport-6.1/820-v6.4-net-phy-fix-circular-LEDS_CLASS-dependencies.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 4bb7aac70b5d8a4bddf4ee0791b834f9f56883d2 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Thu, 20 Apr 2023 10:45:51 +0200
-Subject: [PATCH] net: phy: fix circular LEDS_CLASS dependencies
-
-The CONFIG_PHYLIB symbol is selected by a number of device drivers that
-need PHY support, but it now has a dependency on CONFIG_LEDS_CLASS,
-which may not be enabled, causing build failures.
-
-Avoid the risk of missing and circular dependencies by guarding the
-phylib LED support itself in another Kconfig symbol that can only be
-enabled if the dependency is met.
-
-This could be made a hidden symbol and always enabled when both CONFIG_OF
-and CONFIG_LEDS_CLASS are reachable from the phylib, but there may be an
-advantage in having users see this option when they have a misconfigured
-kernel without built-in LED support.
-
-Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20230420084624.3005701-1-arnd@kernel.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/Kconfig      | 9 ++++++++-
- drivers/net/phy/phy_device.c | 3 ++-
- 2 files changed, 10 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -18,7 +18,6 @@ menuconfig PHYLIB
- 	depends on NETDEVICES
- 	select MDIO_DEVICE
- 	select MDIO_DEVRES
--	depends on LEDS_CLASS || LEDS_CLASS=n
- 	help
- 	  Ethernet controllers are usually attached to PHY
- 	  devices.  This option provides infrastructure for
-@@ -45,6 +44,14 @@ config LED_TRIGGER_PHY
- 		<Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link
- 		for any speed known to the PHY.
- 
-+config PHYLIB_LEDS
-+	bool "Support probing LEDs from device tree"
-+	depends on LEDS_CLASS=y || LEDS_CLASS=PHYLIB
-+	depends on OF
-+	default y
-+	help
-+	  When LED class support is enabled, phylib can automatically
-+	  probe LED setting from device tree.
- 
- config FIXED_PHY
- 	tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -3314,7 +3314,8 @@ static int phy_probe(struct device *dev)
- 	/* Get the LEDs from the device tree, and instantiate standard
- 	 * LEDs for them.
- 	 */
--	err = of_phy_leds(phydev);
-+	if (IS_ENABLED(CONFIG_PHYLIB_LEDS))
-+		err = of_phy_leds(phydev);
- 
- out:
- 	/* Re-assert the reset signal on error */
diff --git a/target/linux/generic/backport-6.1/821-v6.4-net-phy-Fix-reading-LED-reg-property.patch b/target/linux/generic/backport-6.1/821-v6.4-net-phy-Fix-reading-LED-reg-property.patch
deleted file mode 100644
index 622bb9e94a9e..000000000000
--- a/target/linux/generic/backport-6.1/821-v6.4-net-phy-Fix-reading-LED-reg-property.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From aed8fdad2152d946add50bec00a6b07c457bdcdf Mon Sep 17 00:00:00 2001
-From: Alexander Stein <alexander.stein@ew.tq-group.com>
-Date: Mon, 24 Apr 2023 16:16:48 +0200
-Subject: [PATCH] net: phy: Fix reading LED reg property
-
-'reg' is always encoded in 32 bits, thus it has to be read using the
-function with the corresponding bit width.
-
-Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
-Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20230424141648.317944-1-alexander.stein@ew.tq-group.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phy_device.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -3075,6 +3075,7 @@ static int of_phy_led(struct phy_device
- 	struct led_init_data init_data = {};
- 	struct led_classdev *cdev;
- 	struct phy_led *phyled;
-+	u32 index;
- 	int err;
- 
- 	phyled = devm_kzalloc(dev, sizeof(*phyled), GFP_KERNEL);
-@@ -3084,10 +3085,13 @@ static int of_phy_led(struct phy_device
- 	cdev = &phyled->led_cdev;
- 	phyled->phydev = phydev;
- 
--	err = of_property_read_u8(led, "reg", &phyled->index);
-+	err = of_property_read_u32(led, "reg", &index);
- 	if (err)
- 		return err;
-+	if (index > U8_MAX)
-+		return -EINVAL;
- 
-+	phyled->index = index;
- 	if (phydev->drv->led_brightness_set)
- 		cdev->brightness_set_blocking = phy_led_set_brightness;
- 	if (phydev->drv->led_blink_set)
diff --git a/target/linux/generic/backport-6.1/822-v6.4-net-phy-Manual-remove-LEDs-to-ensure-correct-orderin.patch b/target/linux/generic/backport-6.1/822-v6.4-net-phy-Manual-remove-LEDs-to-ensure-correct-orderin.patch
deleted file mode 100644
index 80197e963b84..000000000000
--- a/target/linux/generic/backport-6.1/822-v6.4-net-phy-Manual-remove-LEDs-to-ensure-correct-orderin.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From c938ab4da0eb1620ae3243b0b24c572ddfc318fc Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Sat, 17 Jun 2023 17:55:00 +0200
-Subject: [PATCH] net: phy: Manual remove LEDs to ensure correct ordering
-
-If the core is left to remove the LEDs via devm_, it is performed too
-late, after the PHY driver is removed from the PHY. This results in
-dereferencing a NULL pointer when the LED core tries to turn the LED
-off before destroying the LED.
-
-Manually unregister the LEDs at a safe point in phy_remove.
-
-Cc: stable@vger.kernel.org
-Reported-by: Florian Fainelli <f.fainelli@gmail.com>
-Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
-Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy_device.c | 15 ++++++++++++++-
- 1 file changed, 14 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -3068,6 +3068,15 @@ static int phy_led_blink_set(struct led_
- 	return err;
- }
- 
-+static void phy_leds_unregister(struct phy_device *phydev)
-+{
-+	struct phy_led *phyled;
-+
-+	list_for_each_entry(phyled, &phydev->leds, list) {
-+		led_classdev_unregister(&phyled->led_cdev);
-+	}
-+}
-+
- static int of_phy_led(struct phy_device *phydev,
- 		      struct device_node *led)
- {
-@@ -3101,7 +3110,7 @@ static int of_phy_led(struct phy_device
- 	init_data.fwnode = of_fwnode_handle(led);
- 	init_data.devname_mandatory = true;
- 
--	err = devm_led_classdev_register_ext(dev, cdev, &init_data);
-+	err = led_classdev_register_ext(dev, cdev, &init_data);
- 	if (err)
- 		return err;
- 
-@@ -3130,6 +3139,7 @@ static int of_phy_leds(struct phy_device
- 		err = of_phy_led(phydev, led);
- 		if (err) {
- 			of_node_put(led);
-+			phy_leds_unregister(phydev);
- 			return err;
- 		}
- 	}
-@@ -3335,6 +3345,9 @@ static int phy_remove(struct device *dev
- 
- 	cancel_delayed_work_sync(&phydev->state_queue);
- 
-+	if (IS_ENABLED(CONFIG_PHYLIB_LEDS))
-+		phy_leds_unregister(phydev);
-+
- 	phydev->state = PHY_DOWN;
- 
- 	sfp_bus_del_upstream(phydev->sfp_bus);
diff --git a/target/linux/generic/backport-6.1/823-v6.9-0002-nvmem-mtk-efuse-Register-MediaTek-socinfo-driver-fro.patch b/target/linux/generic/backport-6.1/823-v6.9-0002-nvmem-mtk-efuse-Register-MediaTek-socinfo-driver-fro.patch
deleted file mode 100644
index 8e7c8233e224..000000000000
--- a/target/linux/generic/backport-6.1/823-v6.9-0002-nvmem-mtk-efuse-Register-MediaTek-socinfo-driver-fro.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 998f0633773b3432829fe45d2cd2ffb842f3c78e Mon Sep 17 00:00:00 2001
-From: William-tw Lin <william-tw.lin@mediatek.com>
-Date: Sat, 24 Feb 2024 11:45:07 +0000
-Subject: [PATCH] nvmem: mtk-efuse: Register MediaTek socinfo driver from efuse
-
-The socinfo driver reads chip information from eFuses and does not need
-any devicetree node. Register it from mtk-efuse.
-
-While at it, also add the name for this driver's nvmem_config.
-
-Signed-off-by: William-tw Lin <william-tw.lin@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240224114516.86365-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/mtk-efuse.c | 21 ++++++++++++++++++++-
- 1 file changed, 20 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/mtk-efuse.c
-+++ b/drivers/nvmem/mtk-efuse.c
-@@ -68,6 +68,7 @@ static int mtk_efuse_probe(struct platfo
- 	struct nvmem_config econfig = {};
- 	struct mtk_efuse_priv *priv;
- 	const struct mtk_efuse_pdata *pdata;
-+	struct platform_device *socinfo;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -85,11 +86,20 @@ static int mtk_efuse_probe(struct platfo
- 	econfig.size = resource_size(res);
- 	econfig.priv = priv;
- 	econfig.dev = dev;
-+	econfig.name = "mtk-efuse";
- 	if (pdata->uses_post_processing)
- 		econfig.fixup_dt_cell_info = &mtk_efuse_fixup_dt_cell_info;
- 	nvmem = devm_nvmem_register(dev, &econfig);
-+	if (IS_ERR(nvmem))
-+		return PTR_ERR(nvmem);
- 
--	return PTR_ERR_OR_ZERO(nvmem);
-+	socinfo = platform_device_register_data(&pdev->dev, "mtk-socinfo",
-+						PLATFORM_DEVID_AUTO, NULL, 0);
-+	if (IS_ERR(socinfo))
-+		dev_info(dev, "MediaTek SoC Information will be unavailable\n");
-+
-+	platform_set_drvdata(pdev, socinfo);
-+	return 0;
- }
- 
- static const struct mtk_efuse_pdata mtk_mt8186_efuse_pdata = {
-@@ -108,8 +118,17 @@ static const struct of_device_id mtk_efu
- };
- MODULE_DEVICE_TABLE(of, mtk_efuse_of_match);
- 
-+static void mtk_efuse_remove(struct platform_device *pdev)
-+{
-+	struct platform_device *socinfo = platform_get_drvdata(pdev);
-+
-+	if (!IS_ERR_OR_NULL(socinfo))
-+		platform_device_unregister(socinfo);
-+}
-+
- static struct platform_driver mtk_efuse_driver = {
- 	.probe = mtk_efuse_probe,
-+	.remove_new = mtk_efuse_remove,
- 	.driver = {
- 		.name = "mediatek,efuse",
- 		.of_match_table = mtk_efuse_of_match,
diff --git a/target/linux/generic/backport-6.1/823-v6.9-0003-nvmem-zynqmp_nvmem-zynqmp_nvmem_probe-cleanup.patch b/target/linux/generic/backport-6.1/823-v6.9-0003-nvmem-zynqmp_nvmem-zynqmp_nvmem_probe-cleanup.patch
deleted file mode 100644
index 0f90e548a2a6..000000000000
--- a/target/linux/generic/backport-6.1/823-v6.9-0003-nvmem-zynqmp_nvmem-zynqmp_nvmem_probe-cleanup.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 29be47fcd6a06ea2e79eeeca6e69ad1e23254a69 Mon Sep 17 00:00:00 2001
-From: Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
-Date: Sat, 24 Feb 2024 11:45:11 +0000
-Subject: [PATCH] nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup
-
-- Remove static nvmem_config declaration
-- Remove zynqmp_nvmem_data
-
-Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
-Acked-by: Kalyani Akula <Kalyani.akula@amd.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240224114516.86365-7-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/zynqmp_nvmem.c | 37 ++++++++++++------------------------
- 1 file changed, 12 insertions(+), 25 deletions(-)
-
---- a/drivers/nvmem/zynqmp_nvmem.c
-+++ b/drivers/nvmem/zynqmp_nvmem.c
-@@ -1,6 +1,7 @@
- // SPDX-License-Identifier: GPL-2.0+
- /*
-  * Copyright (C) 2019 Xilinx, Inc.
-+ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
-  */
- 
- #include <linux/module.h>
-@@ -11,36 +12,25 @@
- 
- #define SILICON_REVISION_MASK 0xF
- 
--struct zynqmp_nvmem_data {
--	struct device *dev;
--	struct nvmem_device *nvmem;
--};
- 
- static int zynqmp_nvmem_read(void *context, unsigned int offset,
- 			     void *val, size_t bytes)
- {
-+	struct device *dev = context;
- 	int ret;
--	int idcode, version;
--	struct zynqmp_nvmem_data *priv = context;
-+	int idcode;
-+	int version;
- 
- 	ret = zynqmp_pm_get_chipid(&idcode, &version);
- 	if (ret < 0)
- 		return ret;
- 
--	dev_dbg(priv->dev, "Read chipid val %x %x\n", idcode, version);
-+	dev_dbg(dev, "Read chipid val %x %x\n", idcode, version);
- 	*(int *)val = version & SILICON_REVISION_MASK;
- 
- 	return 0;
- }
- 
--static struct nvmem_config econfig = {
--	.name = "zynqmp-nvmem",
--	.owner = THIS_MODULE,
--	.word_size = 1,
--	.size = 1,
--	.read_only = true,
--};
--
- static const struct of_device_id zynqmp_nvmem_match[] = {
- 	{ .compatible = "xlnx,zynqmp-nvmem-fw", },
- 	{ /* sentinel */ },
-@@ -50,21 +40,18 @@ MODULE_DEVICE_TABLE(of, zynqmp_nvmem_mat
- static int zynqmp_nvmem_probe(struct platform_device *pdev)
- {
- 	struct device *dev = &pdev->dev;
--	struct zynqmp_nvmem_data *priv;
-+	struct nvmem_config econfig = {};
- 
--	priv = devm_kzalloc(dev, sizeof(struct zynqmp_nvmem_data), GFP_KERNEL);
--	if (!priv)
--		return -ENOMEM;
--
--	priv->dev = dev;
-+	econfig.name = "zynqmp-nvmem";
-+	econfig.owner = THIS_MODULE;
-+	econfig.word_size = 1;
-+	econfig.size = 1;
- 	econfig.dev = dev;
- 	econfig.add_legacy_fixed_of_cells = true;
-+	econfig.read_only = true;
- 	econfig.reg_read = zynqmp_nvmem_read;
--	econfig.priv = priv;
--
--	priv->nvmem = devm_nvmem_register(dev, &econfig);
- 
--	return PTR_ERR_OR_ZERO(priv->nvmem);
-+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &econfig));
- }
- 
- static struct platform_driver zynqmp_nvmem_driver = {
diff --git a/target/linux/generic/backport-6.1/823-v6.9-0004-nvmem-zynqmp_nvmem-Add-support-to-access-efuse.patch b/target/linux/generic/backport-6.1/823-v6.9-0004-nvmem-zynqmp_nvmem-Add-support-to-access-efuse.patch
deleted file mode 100644
index 39c2f178350b..000000000000
--- a/target/linux/generic/backport-6.1/823-v6.9-0004-nvmem-zynqmp_nvmem-Add-support-to-access-efuse.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-From 737c0c8d07b5f671c0a33cec95965fcb2d2ea893 Mon Sep 17 00:00:00 2001
-From: Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
-Date: Sat, 24 Feb 2024 11:45:12 +0000
-Subject: [PATCH] nvmem: zynqmp_nvmem: Add support to access efuse
-
-Add support to read/write efuse memory map of ZynqMP.
-Below are the offsets of ZynqMP efuse memory map
-	0 - SOC version(read only)
-	0xC - 0xFC -ZynqMP specific purpose efuses
-	0x100 - 0x17F - Physical Unclonable Function(PUF)
-                efuses repurposed as user efuses
-
-Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
-Acked-by: Kalyani Akula <Kalyani.akula@amd.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240224114516.86365-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/zynqmp_nvmem.c | 186 +++++++++++++++++++++++++++++++++--
- 1 file changed, 176 insertions(+), 10 deletions(-)
-
---- a/drivers/nvmem/zynqmp_nvmem.c
-+++ b/drivers/nvmem/zynqmp_nvmem.c
-@@ -4,6 +4,7 @@
-  * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
-  */
- 
-+#include <linux/dma-mapping.h>
- #include <linux/module.h>
- #include <linux/nvmem-provider.h>
- #include <linux/of.h>
-@@ -11,24 +12,189 @@
- #include <linux/firmware/xlnx-zynqmp.h>
- 
- #define SILICON_REVISION_MASK 0xF
-+#define P_USER_0_64_UPPER_MASK	GENMASK(31, 16)
-+#define P_USER_127_LOWER_4_BIT_MASK GENMASK(3, 0)
-+#define WORD_INBYTES		4
-+#define SOC_VER_SIZE		0x4
-+#define EFUSE_MEMORY_SIZE	0x177
-+#define UNUSED_SPACE		0x8
-+#define ZYNQMP_NVMEM_SIZE	(SOC_VER_SIZE + UNUSED_SPACE + \
-+				 EFUSE_MEMORY_SIZE)
-+#define SOC_VERSION_OFFSET	0x0
-+#define EFUSE_START_OFFSET	0xC
-+#define EFUSE_END_OFFSET	0xFC
-+#define EFUSE_PUF_START_OFFSET	0x100
-+#define EFUSE_PUF_MID_OFFSET	0x140
-+#define EFUSE_PUF_END_OFFSET	0x17F
-+#define EFUSE_NOT_ENABLED	29
- 
-+/*
-+ * efuse access type
-+ */
-+enum efuse_access {
-+	EFUSE_READ = 0,
-+	EFUSE_WRITE
-+};
-+
-+/**
-+ * struct xilinx_efuse - the basic structure
-+ * @src:	address of the buffer to store the data to be write/read
-+ * @size:	read/write word count
-+ * @offset:	read/write offset
-+ * @flag:	0 - represents efuse read and 1- represents efuse write
-+ * @pufuserfuse:0 - represents non-puf efuses, offset is used for read/write
-+ *		1 - represents puf user fuse row number.
-+ *
-+ * this structure stores all the required details to
-+ * read/write efuse memory.
-+ */
-+struct xilinx_efuse {
-+	u64 src;
-+	u32 size;
-+	u32 offset;
-+	enum efuse_access flag;
-+	u32 pufuserfuse;
-+};
-+
-+static int zynqmp_efuse_access(void *context, unsigned int offset,
-+			       void *val, size_t bytes, enum efuse_access flag,
-+			       unsigned int pufflag)
-+{
-+	struct device *dev = context;
-+	struct xilinx_efuse *efuse;
-+	dma_addr_t dma_addr;
-+	dma_addr_t dma_buf;
-+	size_t words = bytes / WORD_INBYTES;
-+	int ret;
-+	int value;
-+	char *data;
- 
--static int zynqmp_nvmem_read(void *context, unsigned int offset,
--			     void *val, size_t bytes)
-+	if (bytes % WORD_INBYTES != 0) {
-+		dev_err(dev, "Bytes requested should be word aligned\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (pufflag == 0 && offset % WORD_INBYTES) {
-+		dev_err(dev, "Offset requested should be word aligned\n");
-+		return -EOPNOTSUPP;
-+	}
-+
-+	if (pufflag == 1 && flag == EFUSE_WRITE) {
-+		memcpy(&value, val, bytes);
-+		if ((offset == EFUSE_PUF_START_OFFSET ||
-+		     offset == EFUSE_PUF_MID_OFFSET) &&
-+		    value & P_USER_0_64_UPPER_MASK) {
-+			dev_err(dev, "Only lower 4 bytes are allowed to be programmed in P_USER_0 & P_USER_64\n");
-+			return -EOPNOTSUPP;
-+		}
-+
-+		if (offset == EFUSE_PUF_END_OFFSET &&
-+		    (value & P_USER_127_LOWER_4_BIT_MASK)) {
-+			dev_err(dev, "Only MSB 28 bits are allowed to be programmed for P_USER_127\n");
-+			return -EOPNOTSUPP;
-+		}
-+	}
-+
-+	efuse = dma_alloc_coherent(dev, sizeof(struct xilinx_efuse),
-+				   &dma_addr, GFP_KERNEL);
-+	if (!efuse)
-+		return -ENOMEM;
-+
-+	data = dma_alloc_coherent(dev, sizeof(bytes),
-+				  &dma_buf, GFP_KERNEL);
-+	if (!data) {
-+		ret = -ENOMEM;
-+		goto efuse_data_fail;
-+	}
-+
-+	if (flag == EFUSE_WRITE) {
-+		memcpy(data, val, bytes);
-+		efuse->flag = EFUSE_WRITE;
-+	} else {
-+		efuse->flag = EFUSE_READ;
-+	}
-+
-+	efuse->src = dma_buf;
-+	efuse->size = words;
-+	efuse->offset = offset;
-+	efuse->pufuserfuse = pufflag;
-+
-+	zynqmp_pm_efuse_access(dma_addr, (u32 *)&ret);
-+	if (ret != 0) {
-+		if (ret == EFUSE_NOT_ENABLED) {
-+			dev_err(dev, "efuse access is not enabled\n");
-+			ret = -EOPNOTSUPP;
-+		} else {
-+			dev_err(dev, "Error in efuse read %x\n", ret);
-+			ret = -EPERM;
-+		}
-+		goto efuse_access_err;
-+	}
-+
-+	if (flag == EFUSE_READ)
-+		memcpy(val, data, bytes);
-+efuse_access_err:
-+	dma_free_coherent(dev, sizeof(bytes),
-+			  data, dma_buf);
-+efuse_data_fail:
-+	dma_free_coherent(dev, sizeof(struct xilinx_efuse),
-+			  efuse, dma_addr);
-+
-+	return ret;
-+}
-+
-+static int zynqmp_nvmem_read(void *context, unsigned int offset, void *val, size_t bytes)
- {
- 	struct device *dev = context;
- 	int ret;
-+	int pufflag = 0;
- 	int idcode;
- 	int version;
- 
--	ret = zynqmp_pm_get_chipid(&idcode, &version);
--	if (ret < 0)
--		return ret;
-+	if (offset >= EFUSE_PUF_START_OFFSET && offset <= EFUSE_PUF_END_OFFSET)
-+		pufflag = 1;
-+
-+	switch (offset) {
-+	/* Soc version offset is zero */
-+	case SOC_VERSION_OFFSET:
-+		if (bytes != SOC_VER_SIZE)
-+			return -EOPNOTSUPP;
-+
-+		ret = zynqmp_pm_get_chipid((u32 *)&idcode, (u32 *)&version);
-+		if (ret < 0)
-+			return ret;
-+
-+		dev_dbg(dev, "Read chipid val %x %x\n", idcode, version);
-+		*(int *)val = version & SILICON_REVISION_MASK;
-+		break;
-+	/* Efuse offset starts from 0xc */
-+	case EFUSE_START_OFFSET ... EFUSE_END_OFFSET:
-+	case EFUSE_PUF_START_OFFSET ... EFUSE_PUF_END_OFFSET:
-+		ret = zynqmp_efuse_access(context, offset, val,
-+					  bytes, EFUSE_READ, pufflag);
-+		break;
-+	default:
-+		*(u32 *)val = 0xDEADBEEF;
-+		ret = 0;
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+static int zynqmp_nvmem_write(void *context,
-+			      unsigned int offset, void *val, size_t bytes)
-+{
-+	int pufflag = 0;
-+
-+	if (offset < EFUSE_START_OFFSET || offset > EFUSE_PUF_END_OFFSET)
-+		return -EOPNOTSUPP;
- 
--	dev_dbg(dev, "Read chipid val %x %x\n", idcode, version);
--	*(int *)val = version & SILICON_REVISION_MASK;
-+	if (offset >= EFUSE_PUF_START_OFFSET && offset <= EFUSE_PUF_END_OFFSET)
-+		pufflag = 1;
- 
--	return 0;
-+	return zynqmp_efuse_access(context, offset,
-+				   val, bytes, EFUSE_WRITE, pufflag);
- }
- 
- static const struct of_device_id zynqmp_nvmem_match[] = {
-@@ -45,11 +211,11 @@ static int zynqmp_nvmem_probe(struct pla
- 	econfig.name = "zynqmp-nvmem";
- 	econfig.owner = THIS_MODULE;
- 	econfig.word_size = 1;
--	econfig.size = 1;
-+	econfig.size = ZYNQMP_NVMEM_SIZE;
- 	econfig.dev = dev;
- 	econfig.add_legacy_fixed_of_cells = true;
--	econfig.read_only = true;
- 	econfig.reg_read = zynqmp_nvmem_read;
-+	econfig.reg_write = zynqmp_nvmem_write;
- 
- 	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &econfig));
- }
diff --git a/target/linux/generic/backport-6.1/823-v6.9-0005-nvmem-mtk-efuse-Drop-NVMEM-device-name.patch b/target/linux/generic/backport-6.1/823-v6.9-0005-nvmem-mtk-efuse-Drop-NVMEM-device-name.patch
deleted file mode 100644
index c67399cb13d0..000000000000
--- a/target/linux/generic/backport-6.1/823-v6.9-0005-nvmem-mtk-efuse-Drop-NVMEM-device-name.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 76c345edef754b16cab81ad9452cc49c09e67066 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wenst@chromium.org>
-Date: Sat, 24 Feb 2024 11:45:14 +0000
-Subject: [PATCH] nvmem: mtk-efuse: Drop NVMEM device name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT8183 has not one but two efuse devices. The static name and ID
-causes the second efuse device to fail to probe, due to duplicate sysfs
-entries.
-
-With the rework of the mtk-socinfo driver, lookup by name is no longer
-necessary. The custom name can simply be dropped.
-
-Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240224114516.86365-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/mtk-efuse.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/nvmem/mtk-efuse.c
-+++ b/drivers/nvmem/mtk-efuse.c
-@@ -86,7 +86,6 @@ static int mtk_efuse_probe(struct platfo
- 	econfig.size = resource_size(res);
- 	econfig.priv = priv;
- 	econfig.dev = dev;
--	econfig.name = "mtk-efuse";
- 	if (pdata->uses_post_processing)
- 		econfig.fixup_dt_cell_info = &mtk_efuse_fixup_dt_cell_info;
- 	nvmem = devm_nvmem_register(dev, &econfig);
diff --git a/target/linux/generic/backport-6.1/823-v6.9-0007-nvmem-core-Print-error-on-wrong-bits-DT-property.patch b/target/linux/generic/backport-6.1/823-v6.9-0007-nvmem-core-Print-error-on-wrong-bits-DT-property.patch
deleted file mode 100644
index 17bab2480261..000000000000
--- a/target/linux/generic/backport-6.1/823-v6.9-0007-nvmem-core-Print-error-on-wrong-bits-DT-property.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From def3173d4f17b37cecbd74d7c269a080b0b01598 Mon Sep 17 00:00:00 2001
-From: Markus Schneider-Pargmann <msp@baylibre.com>
-Date: Sat, 24 Feb 2024 11:45:16 +0000
-Subject: [PATCH] nvmem: core: Print error on wrong bits DT property
-
-The algorithms in nvmem core are built with the constraint that
-bit_offset < 8. If bit_offset is greater the results are wrong. Print an
-error if the devicetree 'bits' property is outside of the valid range
-and abort parsing.
-
-Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240224114516.86365-12-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -806,6 +806,11 @@ static int nvmem_add_cells_from_dt(struc
- 		if (addr && len == (2 * sizeof(u32))) {
- 			info.bit_offset = be32_to_cpup(addr++);
- 			info.nbits = be32_to_cpup(addr);
-+			if (info.bit_offset >= BITS_PER_BYTE || info.nbits < 1) {
-+				dev_err(dev, "nvmem: invalid bits on %pOF\n", child);
-+				of_node_put(child);
-+				return -EINVAL;
-+			}
- 		}
- 
- 		info.np = of_node_get(child);
diff --git a/target/linux/generic/backport-6.1/824-v6.5-leds-trigger-netdev-Remove-NULL-check-before-dev_-pu.patch b/target/linux/generic/backport-6.1/824-v6.5-leds-trigger-netdev-Remove-NULL-check-before-dev_-pu.patch
deleted file mode 100644
index 609115b04aaa..000000000000
--- a/target/linux/generic/backport-6.1/824-v6.5-leds-trigger-netdev-Remove-NULL-check-before-dev_-pu.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From af7320ecae0ce646fd2c4a88341a3fbc243553da Mon Sep 17 00:00:00 2001
-From: Yang Li <yang.lee@linux.alibaba.com>
-Date: Thu, 11 May 2023 15:08:20 +0800
-Subject: [PATCH] leds: trigger: netdev: Remove NULL check before dev_{put,
- hold}
-
-The call netdev_{put, hold} of dev_{put, hold} will check NULL,
-so there is no need to check before using dev_{put, hold},
-remove it to silence the warnings:
-
-./drivers/leds/trigger/ledtrig-netdev.c:291:3-10: WARNING: NULL check before dev_{put, hold} functions is not needed.
-./drivers/leds/trigger/ledtrig-netdev.c:401:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed.
-
-Reported-by: Abaci Robot <abaci@linux.alibaba.com>
-Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=4929
-Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
-Link: https://lore.kernel.org/r/20230511070820.52731-1-yang.lee@linux.alibaba.com
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -462,8 +462,7 @@ static int netdev_trig_notify(struct not
- 		get_device_state(trigger_data);
- 		fallthrough;
- 	case NETDEV_REGISTER:
--		if (trigger_data->net_dev)
--			dev_put(trigger_data->net_dev);
-+		dev_put(trigger_data->net_dev);
- 		dev_hold(dev);
- 		trigger_data->net_dev = dev;
- 		break;
-@@ -594,8 +593,7 @@ static void netdev_trig_deactivate(struc
- 
- 	cancel_delayed_work_sync(&trigger_data->work);
- 
--	if (trigger_data->net_dev)
--		dev_put(trigger_data->net_dev);
-+	dev_put(trigger_data->net_dev);
- 
- 	kfree(trigger_data);
- }
diff --git a/target/linux/generic/backport-6.1/825-v6.5-leds-trigger-netdev-uninitialized-variable-in-netdev.patch b/target/linux/generic/backport-6.1/825-v6.5-leds-trigger-netdev-uninitialized-variable-in-netdev.patch
deleted file mode 100644
index 2f7a6ced9011..000000000000
--- a/target/linux/generic/backport-6.1/825-v6.5-leds-trigger-netdev-uninitialized-variable-in-netdev.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 97c5209b3d374a25ebdb4c2ea9e9c1b121768da0 Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@linaro.org>
-Date: Wed, 14 Jun 2023 10:03:59 +0300
-Subject: [PATCH] leds: trigger: netdev: uninitialized variable in
- netdev_trig_activate()
-
-The qca8k_cled_hw_control_get() function which implements ->hw_control_get
-sets the appropriate bits but does not clear them.  This leads to an
-uninitialized variable bug.  Fix this by setting mode to zero at the
-start.
-
-Fixes: e0256648c831 ("net: dsa: qca8k: implement hw_control ops")
-Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Lee Jones <lee@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/leds/trigger/ledtrig-netdev.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -538,7 +538,7 @@ static void netdev_trig_work(struct work
- static int netdev_trig_activate(struct led_classdev *led_cdev)
- {
- 	struct led_netdev_data *trigger_data;
--	unsigned long mode;
-+	unsigned long mode = 0;
- 	struct device *dev;
- 	int rc;
- 
diff --git a/target/linux/generic/backport-6.1/826-v6.6-01-led-trig-netdev-Fix-requesting-offload-device.patch b/target/linux/generic/backport-6.1/826-v6.6-01-led-trig-netdev-Fix-requesting-offload-device.patch
deleted file mode 100644
index dedf84c64bfe..000000000000
--- a/target/linux/generic/backport-6.1/826-v6.6-01-led-trig-netdev-Fix-requesting-offload-device.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 7df1f14c04cbb1950e79c19793420f87227c3e80 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Tue, 8 Aug 2023 23:04:33 +0200
-Subject: [PATCH 1/4] led: trig: netdev: Fix requesting offload device
-
-When the netdev trigger is activates, it tries to determine what
-device the LED blinks for, and what the current blink mode is.
-
-The documentation for hw_control_get() says:
-
-	 * Return 0 on success, a negative error number on failing parsing the
-	 * initial mode. Error from this function is NOT FATAL as the device
-	 * may be in a not supported initial state by the attached LED trigger.
-	 */
-
-For the Marvell PHY and the Armada 370-rd board, the initial LED blink
-mode is not supported by the trigger, so it returns an error. This
-resulted in not getting the device the LED is blinking for. As a
-result, the device is unknown and offloaded is never performed.
-
-Change to condition to always get the device if offloading is
-supported, and reduce the scope of testing for an error from
-hw_control_get() to skip setting trigger internal state if there is an
-error.
-
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230808210436.838995-2-andrew@lunn.ch
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -564,15 +564,17 @@ static int netdev_trig_activate(struct l
- 	/* Check if hw control is active by default on the LED.
- 	 * Init already enabled mode in hw control.
- 	 */
--	if (supports_hw_control(led_cdev) &&
--	    !led_cdev->hw_control_get(led_cdev, &mode)) {
-+	if (supports_hw_control(led_cdev)) {
- 		dev = led_cdev->hw_control_get_device(led_cdev);
- 		if (dev) {
- 			const char *name = dev_name(dev);
- 
- 			set_device_name(trigger_data, name, strlen(name));
- 			trigger_data->hw_control = true;
--			trigger_data->mode = mode;
-+
-+			rc = led_cdev->hw_control_get(led_cdev, &mode);
-+			if (!rc)
-+				trigger_data->mode = mode;
- 		}
- 	}
- 
diff --git a/target/linux/generic/backport-6.1/826-v6.6-02-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-6.1/826-v6.6-02-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch
deleted file mode 100644
index 505513a53fe3..000000000000
--- a/target/linux/generic/backport-6.1/826-v6.6-02-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From 1dcc03c9a7a824a31eaaecdfaa03542fb25feb6c Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Tue, 8 Aug 2023 23:04:34 +0200
-Subject: [PATCH 2/4] net: phy: phy_device: Call into the PHY driver to set LED
- offload
-
-Linux LEDs can be requested to perform hardware accelerated blinking
-to indicate link, RX, TX etc. Pass the rules for blinking to the PHY
-driver, if it implements the ops needed to determine if a given
-pattern can be offloaded, to offload it, and what the current offload
-is. Additionally implement the op needed to get what device the LED is
-for.
-
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230808210436.838995-3-andrew@lunn.ch
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phy_device.c | 68 ++++++++++++++++++++++++++++++++++++
- include/linux/phy.h          | 33 +++++++++++++++++
- 2 files changed, 101 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -3068,6 +3068,61 @@ static int phy_led_blink_set(struct led_
- 	return err;
- }
- 
-+static __maybe_unused struct device *
-+phy_led_hw_control_get_device(struct led_classdev *led_cdev)
-+{
-+	struct phy_led *phyled = to_phy_led(led_cdev);
-+	struct phy_device *phydev = phyled->phydev;
-+
-+	if (phydev->attached_dev)
-+		return &phydev->attached_dev->dev;
-+	return NULL;
-+}
-+
-+static int __maybe_unused
-+phy_led_hw_control_get(struct led_classdev *led_cdev,
-+		       unsigned long *rules)
-+{
-+	struct phy_led *phyled = to_phy_led(led_cdev);
-+	struct phy_device *phydev = phyled->phydev;
-+	int err;
-+
-+	mutex_lock(&phydev->lock);
-+	err = phydev->drv->led_hw_control_get(phydev, phyled->index, rules);
-+	mutex_unlock(&phydev->lock);
-+
-+	return err;
-+}
-+
-+static int __maybe_unused
-+phy_led_hw_control_set(struct led_classdev *led_cdev,
-+		       unsigned long rules)
-+{
-+	struct phy_led *phyled = to_phy_led(led_cdev);
-+	struct phy_device *phydev = phyled->phydev;
-+	int err;
-+
-+	mutex_lock(&phydev->lock);
-+	err = phydev->drv->led_hw_control_set(phydev, phyled->index, rules);
-+	mutex_unlock(&phydev->lock);
-+
-+	return err;
-+}
-+
-+static __maybe_unused int phy_led_hw_is_supported(struct led_classdev *led_cdev,
-+						  unsigned long rules)
-+{
-+	struct phy_led *phyled = to_phy_led(led_cdev);
-+	struct phy_device *phydev = phyled->phydev;
-+	int err;
-+
-+	mutex_lock(&phydev->lock);
-+	err = phydev->drv->led_hw_is_supported(phydev, phyled->index, rules);
-+	mutex_unlock(&phydev->lock);
-+
-+	return err;
-+}
-+
- static void phy_leds_unregister(struct phy_device *phydev)
- {
- 	struct phy_led *phyled;
-@@ -3105,6 +3160,19 @@ static int of_phy_led(struct phy_device
- 		cdev->brightness_set_blocking = phy_led_set_brightness;
- 	if (phydev->drv->led_blink_set)
- 		cdev->blink_set = phy_led_blink_set;
-+
-+#ifdef CONFIG_LEDS_TRIGGERS
-+	if (phydev->drv->led_hw_is_supported &&
-+	    phydev->drv->led_hw_control_set &&
-+	    phydev->drv->led_hw_control_get) {
-+		cdev->hw_control_is_supported = phy_led_hw_is_supported;
-+		cdev->hw_control_set = phy_led_hw_control_set;
-+		cdev->hw_control_get = phy_led_hw_control_get;
-+		cdev->hw_control_trigger = "netdev";
-+	}
-+
-+	cdev->hw_control_get_device = phy_led_hw_control_get_device;
-+#endif
- 	cdev->max_brightness = 1;
- 	init_data.devicename = dev_name(&phydev->mdio.dev);
- 	init_data.fwnode = of_fwnode_handle(led);
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -1026,6 +1026,39 @@ struct phy_driver {
- 	int (*led_blink_set)(struct phy_device *dev, u8 index,
- 			     unsigned long *delay_on,
- 			     unsigned long *delay_off);
-+	/**
-+	 * @led_hw_is_supported: Can the HW support the given rules.
-+	 * @dev: PHY device which has the LED
-+	 * @index: Which LED of the PHY device
-+	 * @rules The core is interested in these rules
-+	 *
-+	 * Return 0 if yes,  -EOPNOTSUPP if not, or an error code.
-+	 */
-+	int (*led_hw_is_supported)(struct phy_device *dev, u8 index,
-+				   unsigned long rules);
-+	/**
-+	 * @led_hw_control_set: Set the HW to control the LED
-+	 * @dev: PHY device which has the LED
-+	 * @index: Which LED of the PHY device
-+	 * @rules The rules used to control the LED
-+	 *
-+	 * Returns 0, or a an error code.
-+	 */
-+	int (*led_hw_control_set)(struct phy_device *dev, u8 index,
-+				  unsigned long rules);
-+	/**
-+	 * @led_hw_control_get: Get how the HW is controlling the LED
-+	 * @dev: PHY device which has the LED
-+	 * @index: Which LED of the PHY device
-+	 * @rules Pointer to the rules used to control the LED
-+	 *
-+	 * Set *@rules to how the HW is currently blinking. Returns 0
-+	 * on success, or a error code if the current blinking cannot
-+	 * be represented in rules, or some other error happens.
-+	 */
-+	int (*led_hw_control_get)(struct phy_device *dev, u8 index,
-+				  unsigned long *rules);
-+
- };
- #define to_phy_driver(d) container_of(to_mdio_common_driver(d),		\
- 				      struct phy_driver, mdiodrv)
diff --git a/target/linux/generic/backport-6.1/826-v6.6-03-net-phy-marvell-Add-support-for-offloading-LED-blink.patch b/target/linux/generic/backport-6.1/826-v6.6-03-net-phy-marvell-Add-support-for-offloading-LED-blink.patch
deleted file mode 100644
index 1300583b665a..000000000000
--- a/target/linux/generic/backport-6.1/826-v6.6-03-net-phy-marvell-Add-support-for-offloading-LED-blink.patch
+++ /dev/null
@@ -1,344 +0,0 @@
-From 460b0b648fab24f576c481424e0de5479ffb9786 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Tue, 8 Aug 2023 23:04:35 +0200
-Subject: [PATCH 3/4] net: phy: marvell: Add support for offloading LED
- blinking
-
-Add the code needed to indicate if a given blinking pattern can be
-offloaded, to offload a pattern and to try to return the current
-pattern.
-
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230808210436.838995-4-andrew@lunn.ch
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/marvell.c | 281 ++++++++++++++++++++++++++++++++++++++
- 1 file changed, 281 insertions(+)
-
---- a/drivers/net/phy/marvell.c
-+++ b/drivers/net/phy/marvell.c
-@@ -2893,6 +2893,272 @@ static int m88e1318_led_blink_set(struct
- 			       MII_88E1318S_PHY_LED_FUNC, reg);
- }
- 
-+struct marvell_led_rules {
-+	int mode;
-+	unsigned long rules;
-+};
-+
-+static const struct marvell_led_rules marvell_led0[] = {
-+	{
-+		.mode = 0,
-+		.rules = BIT(TRIGGER_NETDEV_LINK),
-+	},
-+	{
-+		.mode = 1,
-+		.rules = (BIT(TRIGGER_NETDEV_LINK) |
-+			  BIT(TRIGGER_NETDEV_RX) |
-+			  BIT(TRIGGER_NETDEV_TX)),
-+	},
-+	{
-+		.mode = 3,
-+		.rules = (BIT(TRIGGER_NETDEV_RX) |
-+			  BIT(TRIGGER_NETDEV_TX)),
-+	},
-+	{
-+		.mode = 4,
-+		.rules = (BIT(TRIGGER_NETDEV_RX) |
-+			  BIT(TRIGGER_NETDEV_TX)),
-+	},
-+	{
-+		.mode = 5,
-+		.rules = BIT(TRIGGER_NETDEV_TX),
-+	},
-+	{
-+		.mode = 6,
-+		.rules = BIT(TRIGGER_NETDEV_LINK),
-+	},
-+	{
-+		.mode = 7,
-+		.rules = BIT(TRIGGER_NETDEV_LINK_1000),
-+	},
-+	{
-+		.mode = 8,
-+		.rules = 0,
-+	},
-+};
-+
-+static const struct marvell_led_rules marvell_led1[] = {
-+	{
-+		.mode = 1,
-+		.rules = (BIT(TRIGGER_NETDEV_LINK) |
-+			  BIT(TRIGGER_NETDEV_RX) |
-+			  BIT(TRIGGER_NETDEV_TX)),
-+	},
-+	{
-+		.mode = 2,
-+		.rules = (BIT(TRIGGER_NETDEV_LINK) |
-+			  BIT(TRIGGER_NETDEV_RX)),
-+	},
-+	{
-+		.mode = 3,
-+		.rules = (BIT(TRIGGER_NETDEV_RX) |
-+			  BIT(TRIGGER_NETDEV_TX)),
-+	},
-+	{
-+		.mode = 4,
-+		.rules = (BIT(TRIGGER_NETDEV_RX) |
-+			  BIT(TRIGGER_NETDEV_TX)),
-+	},
-+	{
-+		.mode = 6,
-+		.rules = (BIT(TRIGGER_NETDEV_LINK_100) |
-+			  BIT(TRIGGER_NETDEV_LINK_1000)),
-+	},
-+	{
-+		.mode = 7,
-+		.rules = BIT(TRIGGER_NETDEV_LINK_100),
-+	},
-+	{
-+		.mode = 8,
-+		.rules = 0,
-+	},
-+};
-+
-+static const struct marvell_led_rules marvell_led2[] = {
-+	{
-+		.mode = 0,
-+		.rules = BIT(TRIGGER_NETDEV_LINK),
-+	},
-+	{
-+		.mode = 1,
-+		.rules = (BIT(TRIGGER_NETDEV_LINK) |
-+			  BIT(TRIGGER_NETDEV_RX) |
-+			  BIT(TRIGGER_NETDEV_TX)),
-+	},
-+	{
-+		.mode = 3,
-+		.rules = (BIT(TRIGGER_NETDEV_RX) |
-+			  BIT(TRIGGER_NETDEV_TX)),
-+	},
-+	{
-+		.mode = 4,
-+		.rules = (BIT(TRIGGER_NETDEV_RX) |
-+			  BIT(TRIGGER_NETDEV_TX)),
-+	},
-+	{
-+		.mode = 5,
-+		.rules = BIT(TRIGGER_NETDEV_TX),
-+	},
-+	{
-+		.mode = 6,
-+		.rules = (BIT(TRIGGER_NETDEV_LINK_10) |
-+			  BIT(TRIGGER_NETDEV_LINK_1000)),
-+	},
-+	{
-+		.mode = 7,
-+		.rules = BIT(TRIGGER_NETDEV_LINK_10),
-+	},
-+	{
-+		.mode = 8,
-+		.rules = 0,
-+	},
-+};
-+
-+static int marvell_find_led_mode(unsigned long rules,
-+				 const struct marvell_led_rules *marvell_rules,
-+				 int count,
-+				 int *mode)
-+{
-+	int i;
-+
-+	for (i = 0; i < count; i++) {
-+		if (marvell_rules[i].rules == rules) {
-+			*mode = marvell_rules[i].mode;
-+			return 0;
-+		}
-+	}
-+	return -EOPNOTSUPP;
-+}
-+
-+static int marvell_get_led_mode(u8 index, unsigned long rules, int *mode)
-+{
-+	int ret;
-+
-+	switch (index) {
-+	case 0:
-+		ret = marvell_find_led_mode(rules, marvell_led0,
-+					    ARRAY_SIZE(marvell_led0), mode);
-+		break;
-+	case 1:
-+		ret = marvell_find_led_mode(rules, marvell_led1,
-+					    ARRAY_SIZE(marvell_led1), mode);
-+		break;
-+	case 2:
-+		ret = marvell_find_led_mode(rules, marvell_led2,
-+					    ARRAY_SIZE(marvell_led2), mode);
-+		break;
-+	default:
-+		ret = -EINVAL;
-+	}
-+
-+	return ret;
-+}
-+
-+static int marvell_find_led_rules(unsigned long *rules,
-+				  const struct marvell_led_rules *marvell_rules,
-+				  int count,
-+				  int mode)
-+{
-+	int i;
-+
-+	for (i = 0; i < count; i++) {
-+		if (marvell_rules[i].mode == mode) {
-+			*rules = marvell_rules[i].rules;
-+			return 0;
-+		}
-+	}
-+	return -EOPNOTSUPP;
-+}
-+
-+static int marvell_get_led_rules(u8 index, unsigned long *rules, int mode)
-+{
-+	int ret;
-+
-+	switch (index) {
-+	case 0:
-+		ret = marvell_find_led_rules(rules, marvell_led0,
-+					     ARRAY_SIZE(marvell_led0), mode);
-+		break;
-+	case 1:
-+		ret = marvell_find_led_rules(rules, marvell_led1,
-+					     ARRAY_SIZE(marvell_led1), mode);
-+		break;
-+	case 2:
-+		ret = marvell_find_led_rules(rules, marvell_led2,
-+					     ARRAY_SIZE(marvell_led2), mode);
-+		break;
-+	default:
-+		ret = -EOPNOTSUPP;
-+	}
-+
-+	return ret;
-+}
-+
-+static int m88e1318_led_hw_is_supported(struct phy_device *phydev, u8 index,
-+					unsigned long rules)
-+{
-+	int mode, ret;
-+
-+	switch (index) {
-+	case 0:
-+	case 1:
-+	case 2:
-+		ret = marvell_get_led_mode(index, rules, &mode);
-+		break;
-+	default:
-+		ret = -EINVAL;
-+	}
-+
-+	return ret;
-+}
-+
-+static int m88e1318_led_hw_control_set(struct phy_device *phydev, u8 index,
-+				       unsigned long rules)
-+{
-+	int mode, ret, reg;
-+
-+	switch (index) {
-+	case 0:
-+	case 1:
-+	case 2:
-+		ret = marvell_get_led_mode(index, rules, &mode);
-+		break;
-+	default:
-+		ret = -EINVAL;
-+	}
-+
-+	if (ret < 0)
-+		return ret;
-+
-+	reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE,
-+			     MII_88E1318S_PHY_LED_FUNC);
-+	if (reg < 0)
-+		return reg;
-+
-+	reg &= ~(0xf << (4 * index));
-+	reg |= mode << (4 * index);
-+	return phy_write_paged(phydev, MII_MARVELL_LED_PAGE,
-+			       MII_88E1318S_PHY_LED_FUNC, reg);
-+}
-+
-+static int m88e1318_led_hw_control_get(struct phy_device *phydev, u8 index,
-+				       unsigned long *rules)
-+{
-+	int mode, reg;
-+
-+	if (index > 2)
-+		return -EINVAL;
-+
-+	reg = phy_read_paged(phydev, MII_MARVELL_LED_PAGE,
-+			     MII_88E1318S_PHY_LED_FUNC);
-+	if (reg < 0)
-+		return reg;
-+
-+	mode = (reg >> (4 * index)) & 0xf;
-+
-+	return marvell_get_led_rules(index, rules, mode);
-+}
-+
- static int marvell_probe(struct phy_device *phydev)
- {
- 	struct marvell_priv *priv;
-@@ -3144,6 +3410,9 @@ static struct phy_driver marvell_drivers
- 		.get_stats = marvell_get_stats,
- 		.led_brightness_set = m88e1318_led_brightness_set,
- 		.led_blink_set = m88e1318_led_blink_set,
-+		.led_hw_is_supported = m88e1318_led_hw_is_supported,
-+		.led_hw_control_set = m88e1318_led_hw_control_set,
-+		.led_hw_control_get = m88e1318_led_hw_control_get,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1145,
-@@ -3252,6 +3521,9 @@ static struct phy_driver marvell_drivers
- 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
- 		.led_brightness_set = m88e1318_led_brightness_set,
- 		.led_blink_set = m88e1318_led_blink_set,
-+		.led_hw_is_supported = m88e1318_led_hw_is_supported,
-+		.led_hw_control_set = m88e1318_led_hw_control_set,
-+		.led_hw_control_get = m88e1318_led_hw_control_get,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1540,
-@@ -3280,6 +3552,9 @@ static struct phy_driver marvell_drivers
- 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
- 		.led_brightness_set = m88e1318_led_brightness_set,
- 		.led_blink_set = m88e1318_led_blink_set,
-+		.led_hw_is_supported = m88e1318_led_hw_is_supported,
-+		.led_hw_control_set = m88e1318_led_hw_control_set,
-+		.led_hw_control_get = m88e1318_led_hw_control_get,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E1545,
-@@ -3308,6 +3583,9 @@ static struct phy_driver marvell_drivers
- 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
- 		.led_brightness_set = m88e1318_led_brightness_set,
- 		.led_blink_set = m88e1318_led_blink_set,
-+		.led_hw_is_supported = m88e1318_led_hw_is_supported,
-+		.led_hw_control_set = m88e1318_led_hw_control_set,
-+		.led_hw_control_get = m88e1318_led_hw_control_get,
- 	},
- 	{
- 		.phy_id = MARVELL_PHY_ID_88E3016,
-@@ -3451,6 +3729,9 @@ static struct phy_driver marvell_drivers
- 		.set_tunable = m88e1540_set_tunable,
- 		.led_brightness_set = m88e1318_led_brightness_set,
- 		.led_blink_set = m88e1318_led_blink_set,
-+		.led_hw_is_supported = m88e1318_led_hw_is_supported,
-+		.led_hw_control_set = m88e1318_led_hw_control_set,
-+		.led_hw_control_get = m88e1318_led_hw_control_get,
- 	},
- };
- 
diff --git a/target/linux/generic/backport-6.1/826-v6.6-04-leds-trig-netdev-Disable-offload-on-deactivation-of-.patch b/target/linux/generic/backport-6.1/826-v6.6-04-leds-trig-netdev-Disable-offload-on-deactivation-of-.patch
deleted file mode 100644
index d6a69aa9ca2d..000000000000
--- a/target/linux/generic/backport-6.1/826-v6.6-04-leds-trig-netdev-Disable-offload-on-deactivation-of-.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From e8fbcc47a8e935f36f044d85f21a99acecbd7bfb Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Tue, 8 Aug 2023 23:04:36 +0200
-Subject: [PATCH 4/4] leds: trig-netdev: Disable offload on deactivation of
- trigger
-
-Ensure that the offloading of blinking is stopped when the trigger is
-deactivated. Calling led_set_brightness() is documented as stopping
-offload and setting the LED to a constant brightness.
-
-Suggested-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230808210436.838995-5-andrew@lunn.ch
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -595,6 +595,8 @@ static void netdev_trig_deactivate(struc
- 
- 	cancel_delayed_work_sync(&trigger_data->work);
- 
-+	led_set_brightness(led_cdev, LED_OFF);
-+
- 	dev_put(trigger_data->net_dev);
- 
- 	kfree(trigger_data);
diff --git a/target/linux/generic/backport-6.1/827-v6.3-0001-of-base-add-of_parse_phandle_with_optional_args.patch b/target/linux/generic/backport-6.1/827-v6.3-0001-of-base-add-of_parse_phandle_with_optional_args.patch
deleted file mode 100644
index b4cb96d24832..000000000000
--- a/target/linux/generic/backport-6.1/827-v6.3-0001-of-base-add-of_parse_phandle_with_optional_args.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From c5d264d4b527c96ae8903376a4b195df47b05203 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:43 +0000
-Subject: [PATCH] of: base: add of_parse_phandle_with_optional_args()
-
-Add a new variant of the of_parse_phandle_with_args() which treats the
-cells name as optional. If it's missing, it is assumed that the phandle
-has no arguments.
-
-Up until now, a nvmem node didn't have any arguments, so all the device
-trees haven't any '#*-cells' property. But there is a need for an
-additional argument for the phandle, for which we need a '#*-cells'
-property. Therefore, we need to support nvmem nodes with and without
-this property.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- include/linux/of.h | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -1011,6 +1011,31 @@ static inline int of_parse_phandle_with_
- }
- 
- /**
-+ * of_parse_phandle_with_optional_args() - Find a node pointed by phandle in a list
-+ * @np:		pointer to a device tree node containing a list
-+ * @list_name:	property name that contains a list
-+ * @cells_name:	property name that specifies phandles' arguments count
-+ * @index:	index of a phandle to parse out
-+ * @out_args:	optional pointer to output arguments structure (will be filled)
-+ *
-+ * Same as of_parse_phandle_with_args() except that if the cells_name property
-+ * is not found, cell_count of 0 is assumed.
-+ *
-+ * This is used to useful, if you have a phandle which didn't have arguments
-+ * before and thus doesn't have a '#*-cells' property but is now migrated to
-+ * having arguments while retaining backwards compatibility.
-+ */
-+static inline int of_parse_phandle_with_optional_args(const struct device_node *np,
-+						      const char *list_name,
-+						      const char *cells_name,
-+						      int index,
-+						      struct of_phandle_args *out_args)
-+{
-+	return __of_parse_phandle_with_args(np, list_name, cells_name,
-+					    0, index, out_args);
-+}
-+
-+/**
-  * of_property_count_u8_elems - Count the number of u8 elements in a property
-  *
-  * @np:		device node from which the property value is to be read.
diff --git a/target/linux/generic/backport-6.1/827-v6.3-0002-of-property-make-.-cells-optional-for-simple-props.patch b/target/linux/generic/backport-6.1/827-v6.3-0002-of-property-make-.-cells-optional-for-simple-props.patch
deleted file mode 100644
index 66c29126b6be..000000000000
--- a/target/linux/generic/backport-6.1/827-v6.3-0002-of-property-make-.-cells-optional-for-simple-props.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From ff24fed10ba414d19579e26e60b126fad2f2bb07 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:44 +0000
-Subject: [PATCH] of: property: make #.*-cells optional for simple props
-
-Sometimes, future bindings for phandles will get additional arguments.
-Thus the target node of the phandle will need a new #.*-cells property.
-To be backwards compatible, this needs to be optional.
-
-Prepare the DEFINE_SIMPLE_PROPS() to handle the cells name as optional.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-11-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/property.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/of/property.c
-+++ b/drivers/of/property.c
-@@ -1146,8 +1146,8 @@ static struct device_node *parse_prop_ce
- 	if (strcmp(prop_name, list_name))
- 		return NULL;
- 
--	if (of_parse_phandle_with_args(np, list_name, cells_name, index,
--				       &sup_args))
-+	if (__of_parse_phandle_with_args(np, list_name, cells_name, 0, index,
-+					 &sup_args))
- 		return NULL;
- 
- 	return sup_args.np;
diff --git a/target/linux/generic/backport-6.1/827-v6.3-0003-of-property-add-nvmem-cell-cells-property.patch b/target/linux/generic/backport-6.1/827-v6.3-0003-of-property-add-nvmem-cell-cells-property.patch
deleted file mode 100644
index 07354d7da7c0..000000000000
--- a/target/linux/generic/backport-6.1/827-v6.3-0003-of-property-add-nvmem-cell-cells-property.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e2d8172043d2e50df19fcd59c11e5593de8188d7 Mon Sep 17 00:00:00 2001
-From: Michael Walle <michael@walle.cc>
-Date: Mon, 6 Feb 2023 13:43:45 +0000
-Subject: [PATCH] of: property: add #nvmem-cell-cells property
-
-Bindings describe the new '#nvmem-cell-cells' property. Now that the
-arguments count property is optional, we just add this property to the
-nvmem-cells.
-
-Signed-off-by: Michael Walle <michael@walle.cc>
-Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230206134356.839737-12-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/property.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/of/property.c
-+++ b/drivers/of/property.c
-@@ -1251,7 +1251,7 @@ DEFINE_SIMPLE_PROP(dmas, "dmas", "#dma-c
- DEFINE_SIMPLE_PROP(power_domains, "power-domains", "#power-domain-cells")
- DEFINE_SIMPLE_PROP(hwlocks, "hwlocks", "#hwlock-cells")
- DEFINE_SIMPLE_PROP(extcon, "extcon", NULL)
--DEFINE_SIMPLE_PROP(nvmem_cells, "nvmem-cells", NULL)
-+DEFINE_SIMPLE_PROP(nvmem_cells, "nvmem-cells", "#nvmem-cell-cells")
- DEFINE_SIMPLE_PROP(phys, "phys", "#phy-cells")
- DEFINE_SIMPLE_PROP(wakeup_parent, "wakeup-parent", NULL)
- DEFINE_SIMPLE_PROP(pinctrl0, "pinctrl-0", NULL)
diff --git a/target/linux/generic/backport-6.1/827-v6.3-0004-of-device-Ignore-modalias-of-reused-nodes.patch b/target/linux/generic/backport-6.1/827-v6.3-0004-of-device-Ignore-modalias-of-reused-nodes.patch
deleted file mode 100644
index 8dc370618e6b..000000000000
--- a/target/linux/generic/backport-6.1/827-v6.3-0004-of-device-Ignore-modalias-of-reused-nodes.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 553bd29700145e1849698985e9800f14e967da49 Mon Sep 17 00:00:00 2001
-From: Alexander Stein <alexander.stein@ew.tq-group.com>
-Date: Tue, 7 Feb 2023 12:05:29 +0100
-Subject: [PATCH] of: device: Ignore modalias of reused nodes
-
-If of_node is reused, do not use that node's modalias. This will hide
-the name of the actual device. This is rather prominent in USB glue
-drivers creating a platform device for the host controller.
-
-Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20230207110531.1060252-2-alexander.stein@ew.tq-group.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -256,7 +256,7 @@ static ssize_t of_device_get_modalias(st
- 	ssize_t csize;
- 	ssize_t tsize;
- 
--	if ((!dev) || (!dev->of_node))
-+	if ((!dev) || (!dev->of_node) || dev->of_node_reused)
- 		return -ENODEV;
- 
- 	/* Name & Type */
-@@ -379,7 +379,7 @@ int of_device_uevent_modalias(struct dev
- {
- 	int sl;
- 
--	if ((!dev) || (!dev->of_node))
-+	if ((!dev) || (!dev->of_node) || dev->of_node_reused)
- 		return -ENODEV;
- 
- 	/* Devicetree modalias is tricky, we add it in 2 steps */
diff --git a/target/linux/generic/backport-6.1/827-v6.3-0005-of-device-Do-not-ignore-error-code-in-of_device_ueve.patch b/target/linux/generic/backport-6.1/827-v6.3-0005-of-device-Do-not-ignore-error-code-in-of_device_ueve.patch
deleted file mode 100644
index dcdc2313ba6a..000000000000
--- a/target/linux/generic/backport-6.1/827-v6.3-0005-of-device-Do-not-ignore-error-code-in-of_device_ueve.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 2295bed9bebe8d1eef276194fed5b5fbe89c5363 Mon Sep 17 00:00:00 2001
-From: Alexander Stein <alexander.stein@ew.tq-group.com>
-Date: Tue, 7 Feb 2023 12:05:30 +0100
-Subject: [PATCH] of: device: Do not ignore error code in
- of_device_uevent_modalias
-
-of_device_get_modalias might return an error code, propagate that one.
-Otherwise the negative, signed integer is propagated to unsigned integer
-for the comparison resulting in a huge 'sl' size.
-
-Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20230207110531.1060252-3-alexander.stein@ew.tq-group.com
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -388,6 +388,8 @@ int of_device_uevent_modalias(struct dev
- 
- 	sl = of_device_get_modalias(dev, &env->buf[env->buflen-1],
- 				    sizeof(env->buf) - env->buflen);
-+	if (sl < 0)
-+		return sl;
- 	if (sl >= (sizeof(env->buf) - env->buflen))
- 		return -ENOMEM;
- 	env->buflen += sl;
diff --git a/target/linux/generic/backport-6.1/828-v6.4-0002-of-Update-of_device_get_modalias.patch b/target/linux/generic/backport-6.1/828-v6.4-0002-of-Update-of_device_get_modalias.patch
deleted file mode 100644
index 280ed9085c7a..000000000000
--- a/target/linux/generic/backport-6.1/828-v6.4-0002-of-Update-of_device_get_modalias.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From 5c3d15e127ebfc0754cd18def7124633b6d46672 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:15 +0100
-Subject: [PATCH] of: Update of_device_get_modalias()
-
-This function only needs a "struct device_node" to work, but for
-convenience the author (and only user) of this helper did use a "struct
-device" and put it in device.c.
-
-Let's convert this helper to take a "struct device node" instead. This
-change asks for two additional changes: renaming it "of_modalias()"
-to fit the current naming, and moving it outside of device.c which will
-be done in a follow-up commit.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c | 29 +++++++++++++++++------------
- 1 file changed, 17 insertions(+), 12 deletions(-)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -248,7 +248,7 @@ const void *of_device_get_match_data(con
- }
- EXPORT_SYMBOL(of_device_get_match_data);
- 
--static ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len)
-+static ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len)
- {
- 	const char *compat;
- 	char *c;
-@@ -256,19 +256,16 @@ static ssize_t of_device_get_modalias(st
- 	ssize_t csize;
- 	ssize_t tsize;
- 
--	if ((!dev) || (!dev->of_node) || dev->of_node_reused)
--		return -ENODEV;
--
- 	/* Name & Type */
- 	/* %p eats all alphanum characters, so %c must be used here */
--	csize = snprintf(str, len, "of:N%pOFn%c%s", dev->of_node, 'T',
--			 of_node_get_device_type(dev->of_node));
-+	csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T',
-+			 of_node_get_device_type(np));
- 	tsize = csize;
- 	len -= csize;
- 	if (str)
- 		str += csize;
- 
--	of_property_for_each_string(dev->of_node, "compatible", p, compat) {
-+	of_property_for_each_string(np, "compatible", p, compat) {
- 		csize = strlen(compat) + 1;
- 		tsize += csize;
- 		if (csize > len)
-@@ -293,7 +290,10 @@ int of_device_request_module(struct devi
- 	ssize_t size;
- 	int ret;
- 
--	size = of_device_get_modalias(dev, NULL, 0);
-+	if (!dev || !dev->of_node)
-+		return -ENODEV;
-+
-+	size = of_modalias(dev->of_node, NULL, 0);
- 	if (size < 0)
- 		return size;
- 
-@@ -304,7 +304,7 @@ int of_device_request_module(struct devi
- 	if (!str)
- 		return -ENOMEM;
- 
--	of_device_get_modalias(dev, str, size);
-+	of_modalias(dev->of_node, str, size);
- 	str[size - 1] = '\0';
- 	ret = request_module(str);
- 	kfree(str);
-@@ -321,7 +321,12 @@ EXPORT_SYMBOL_GPL(of_device_request_modu
-  */
- ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len)
- {
--	ssize_t sl = of_device_get_modalias(dev, str, len - 2);
-+	ssize_t sl;
-+
-+	if (!dev || !dev->of_node || dev->of_node_reused)
-+		return -ENODEV;
-+
-+	sl = of_modalias(dev->of_node, str, len - 2);
- 	if (sl < 0)
- 		return sl;
- 	if (sl > len - 2)
-@@ -386,8 +391,8 @@ int of_device_uevent_modalias(struct dev
- 	if (add_uevent_var(env, "MODALIAS="))
- 		return -ENOMEM;
- 
--	sl = of_device_get_modalias(dev, &env->buf[env->buflen-1],
--				    sizeof(env->buf) - env->buflen);
-+	sl = of_modalias(dev->of_node, &env->buf[env->buflen-1],
-+			 sizeof(env->buf) - env->buflen);
- 	if (sl < 0)
- 		return sl;
- 	if (sl >= (sizeof(env->buf) - env->buflen))
diff --git a/target/linux/generic/backport-6.1/828-v6.4-0003-of-Rename-of_modalias_node.patch b/target/linux/generic/backport-6.1/828-v6.4-0003-of-Rename-of_modalias_node.patch
deleted file mode 100644
index 69d316b8fa3c..000000000000
--- a/target/linux/generic/backport-6.1/828-v6.4-0003-of-Rename-of_modalias_node.patch
+++ /dev/null
@@ -1,173 +0,0 @@
-From 673aa1ed1c9b6710bf24e3f0957d85e2f46c77db Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:16 +0100
-Subject: [PATCH] of: Rename of_modalias_node()
-
-This helper does not produce a real modalias, but tries to get the
-"product" compatible part of the "vendor,product" compatibles only. It
-is far from creating a purely useful modalias string and does not seem
-to be used like that directly anyway, so let's try to give this helper a
-more meaningful name before moving there a real modalias helper (already
-existing under of/device.c).
-
-Also update the various documentations to refer to the strings as
-"aliases" rather than "modaliases" which has a real meaning in the Linux
-kernel.
-
-There is no functional change.
-
-Cc: Rafael J. Wysocki <rafael@kernel.org>
-Cc: Len Brown <lenb@kernel.org>
-Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-Cc: Maxime Ripard <mripard@kernel.org>
-Cc: Thomas Zimmermann <tzimmermann@suse.de>
-Cc: Sebastian Reichel <sre@kernel.org>
-Cc: Wolfram Sang <wsa@kernel.org>
-Cc: Mark Brown <broonie@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Acked-by: Mark Brown <broonie@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Acked-by: Sebastian Reichel <sre@kernel.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-9-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/acpi/bus.c                |  7 ++++---
- drivers/gpu/drm/drm_mipi_dsi.c    |  2 +-
- drivers/hsi/hsi_core.c            |  2 +-
- drivers/i2c/busses/i2c-powermac.c |  2 +-
- drivers/i2c/i2c-core-of.c         |  2 +-
- drivers/of/base.c                 | 18 +++++++++++-------
- drivers/spi/spi.c                 |  4 ++--
- include/linux/of.h                |  3 ++-
- 8 files changed, 23 insertions(+), 17 deletions(-)
-
---- a/drivers/acpi/bus.c
-+++ b/drivers/acpi/bus.c
-@@ -806,9 +806,10 @@ static bool acpi_of_modalias(struct acpi
-  * @modalias:   Pointer to buffer that modalias value will be copied into
-  * @len:	Length of modalias buffer
-  *
-- * This is a counterpart of of_modalias_node() for struct acpi_device objects.
-- * If there is a compatible string for @adev, it will be copied to @modalias
-- * with the vendor prefix stripped; otherwise, @default_id will be used.
-+ * This is a counterpart of of_alias_from_compatible() for struct acpi_device
-+ * objects. If there is a compatible string for @adev, it will be copied to
-+ * @modalias with the vendor prefix stripped; otherwise, @default_id will be
-+ * used.
-  */
- void acpi_set_modalias(struct acpi_device *adev, const char *default_id,
- 		       char *modalias, size_t len)
---- a/drivers/gpu/drm/drm_mipi_dsi.c
-+++ b/drivers/gpu/drm/drm_mipi_dsi.c
-@@ -160,7 +160,7 @@ of_mipi_dsi_device_add(struct mipi_dsi_h
- 	int ret;
- 	u32 reg;
- 
--	if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
-+	if (of_alias_from_compatible(node, info.type, sizeof(info.type)) < 0) {
- 		drm_err(host, "modalias failure on %pOF\n", node);
- 		return ERR_PTR(-EINVAL);
- 	}
---- a/drivers/hsi/hsi_core.c
-+++ b/drivers/hsi/hsi_core.c
-@@ -207,7 +207,7 @@ static void hsi_add_client_from_dt(struc
- 	if (!cl)
- 		return;
- 
--	err = of_modalias_node(client, name, sizeof(name));
-+	err = of_alias_from_compatible(client, name, sizeof(name));
- 	if (err)
- 		goto err;
- 
---- a/drivers/i2c/busses/i2c-powermac.c
-+++ b/drivers/i2c/busses/i2c-powermac.c
-@@ -284,7 +284,7 @@ static bool i2c_powermac_get_type(struct
- 	 */
- 
- 	/* First try proper modalias */
--	if (of_modalias_node(node, tmp, sizeof(tmp)) >= 0) {
-+	if (of_alias_from_compatible(node, tmp, sizeof(tmp)) >= 0) {
- 		snprintf(type, type_size, "MAC,%s", tmp);
- 		return true;
- 	}
---- a/drivers/i2c/i2c-core-of.c
-+++ b/drivers/i2c/i2c-core-of.c
-@@ -27,7 +27,7 @@ int of_i2c_get_board_info(struct device
- 
- 	memset(info, 0, sizeof(*info));
- 
--	if (of_modalias_node(node, info->type, sizeof(info->type)) < 0) {
-+	if (of_alias_from_compatible(node, info->type, sizeof(info->type)) < 0) {
- 		dev_err(dev, "of_i2c: modalias failure on %pOF\n", node);
- 		return -EINVAL;
- 	}
---- a/drivers/of/base.c
-+++ b/drivers/of/base.c
-@@ -1208,19 +1208,23 @@ struct device_node *of_find_matching_nod
- EXPORT_SYMBOL(of_find_matching_node_and_match);
- 
- /**
-- * of_modalias_node - Lookup appropriate modalias for a device node
-+ * of_alias_from_compatible - Lookup appropriate alias for a device node
-+ *			      depending on compatible
-  * @node:	pointer to a device tree node
-- * @modalias:	Pointer to buffer that modalias value will be copied into
-- * @len:	Length of modalias value
-+ * @alias:	Pointer to buffer that alias value will be copied into
-+ * @len:	Length of alias value
-  *
-  * Based on the value of the compatible property, this routine will attempt
-- * to choose an appropriate modalias value for a particular device tree node.
-+ * to choose an appropriate alias value for a particular device tree node.
-  * It does this by stripping the manufacturer prefix (as delimited by a ',')
-  * from the first entry in the compatible list property.
-  *
-+ * Note: The matching on just the "product" side of the compatible is a relic
-+ * from I2C and SPI. Please do not add any new user.
-+ *
-  * Return: This routine returns 0 on success, <0 on failure.
-  */
--int of_modalias_node(struct device_node *node, char *modalias, int len)
-+int of_alias_from_compatible(const struct device_node *node, char *alias, int len)
- {
- 	const char *compatible, *p;
- 	int cplen;
-@@ -1229,10 +1233,10 @@ int of_modalias_node(struct device_node
- 	if (!compatible || strlen(compatible) > cplen)
- 		return -ENODEV;
- 	p = strchr(compatible, ',');
--	strscpy(modalias, p ? p + 1 : compatible, len);
-+	strscpy(alias, p ? p + 1 : compatible, len);
- 	return 0;
- }
--EXPORT_SYMBOL_GPL(of_modalias_node);
-+EXPORT_SYMBOL_GPL(of_alias_from_compatible);
- 
- /**
-  * of_find_node_by_phandle - Find a node given a phandle
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -2334,8 +2334,8 @@ of_register_spi_device(struct spi_contro
- 	}
- 
- 	/* Select device driver */
--	rc = of_modalias_node(nc, spi->modalias,
--				sizeof(spi->modalias));
-+	rc = of_alias_from_compatible(nc, spi->modalias,
-+				      sizeof(spi->modalias));
- 	if (rc < 0) {
- 		dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc);
- 		goto err_out;
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -364,7 +364,8 @@ extern int of_n_addr_cells(struct device
- extern int of_n_size_cells(struct device_node *np);
- extern const struct of_device_id *of_match_node(
- 	const struct of_device_id *matches, const struct device_node *node);
--extern int of_modalias_node(struct device_node *node, char *modalias, int len);
-+extern int of_alias_from_compatible(const struct device_node *node, char *alias,
-+				    int len);
- extern void of_print_phandle_args(const char *msg, const struct of_phandle_args *args);
- extern int __of_parse_phandle_with_args(const struct device_node *np,
- 	const char *list_name, const char *cells_name, int cell_count,
diff --git a/target/linux/generic/backport-6.1/828-v6.4-0004-of-Move-of_modalias-to-module.c.patch b/target/linux/generic/backport-6.1/828-v6.4-0004-of-Move-of_modalias-to-module.c.patch
deleted file mode 100644
index 16baed118750..000000000000
--- a/target/linux/generic/backport-6.1/828-v6.4-0004-of-Move-of_modalias-to-module.c.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From bd7a7ed774afd1a4174df34227626c95573be517 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:17 +0100
-Subject: [PATCH] of: Move of_modalias() to module.c
-
-Create a specific .c file for OF related module handling.
-Move of_modalias() inside as a first step.
-
-The helper is exposed through of.h even though it is only used by core
-files because the users from device.c will soon be split into an OF-only
-helper in module.c as well as a device-oriented inline helper in
-of_device.h. Putting this helper in of_private.h would require to
-include of_private.h from of_device.h, which is not acceptable.
-
-Suggested-by: Rob Herring <robh+dt@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/Makefile |  2 +-
- drivers/of/device.c | 37 -------------------------------------
- drivers/of/module.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
- include/linux/of.h  |  9 +++++++++
- 4 files changed, 54 insertions(+), 38 deletions(-)
- create mode 100644 drivers/of/module.c
-
---- a/drivers/of/Makefile
-+++ b/drivers/of/Makefile
-@@ -1,5 +1,5 @@
- # SPDX-License-Identifier: GPL-2.0
--obj-y = base.o device.o platform.o property.o
-+obj-y = base.o device.o module.o platform.o property.o
- obj-$(CONFIG_OF_KOBJ) += kobj.o
- obj-$(CONFIG_OF_DYNAMIC) += dynamic.o
- obj-$(CONFIG_OF_FLATTREE) += fdt.o
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -1,5 +1,4 @@
- // SPDX-License-Identifier: GPL-2.0
--#include <linux/string.h>
- #include <linux/kernel.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -248,42 +247,6 @@ const void *of_device_get_match_data(con
- }
- EXPORT_SYMBOL(of_device_get_match_data);
- 
--static ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len)
--{
--	const char *compat;
--	char *c;
--	struct property *p;
--	ssize_t csize;
--	ssize_t tsize;
--
--	/* Name & Type */
--	/* %p eats all alphanum characters, so %c must be used here */
--	csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T',
--			 of_node_get_device_type(np));
--	tsize = csize;
--	len -= csize;
--	if (str)
--		str += csize;
--
--	of_property_for_each_string(np, "compatible", p, compat) {
--		csize = strlen(compat) + 1;
--		tsize += csize;
--		if (csize > len)
--			continue;
--
--		csize = snprintf(str, len, "C%s", compat);
--		for (c = str; c; ) {
--			c = strchr(c, ' ');
--			if (c)
--				*c++ = '_';
--		}
--		len -= csize;
--		str += csize;
--	}
--
--	return tsize;
--}
--
- int of_device_request_module(struct device *dev)
- {
- 	char *str;
---- /dev/null
-+++ b/drivers/of/module.c
-@@ -0,0 +1,44 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Linux kernel module helpers.
-+ */
-+
-+#include <linux/of.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+
-+ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len)
-+{
-+	const char *compat;
-+	char *c;
-+	struct property *p;
-+	ssize_t csize;
-+	ssize_t tsize;
-+
-+	/* Name & Type */
-+	/* %p eats all alphanum characters, so %c must be used here */
-+	csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T',
-+			 of_node_get_device_type(np));
-+	tsize = csize;
-+	len -= csize;
-+	if (str)
-+		str += csize;
-+
-+	of_property_for_each_string(np, "compatible", p, compat) {
-+		csize = strlen(compat) + 1;
-+		tsize += csize;
-+		if (csize > len)
-+			continue;
-+
-+		csize = snprintf(str, len, "C%s", compat);
-+		for (c = str; c; ) {
-+			c = strchr(c, ' ');
-+			if (c)
-+				*c++ = '_';
-+		}
-+		len -= csize;
-+		str += csize;
-+	}
-+
-+	return tsize;
-+}
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -376,6 +376,9 @@ extern int of_parse_phandle_with_args_ma
- extern int of_count_phandle_with_args(const struct device_node *np,
- 	const char *list_name, const char *cells_name);
- 
-+/* module functions */
-+extern ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len);
-+
- /* phandle iterator functions */
- extern int of_phandle_iterator_init(struct of_phandle_iterator *it,
- 				    const struct device_node *np,
-@@ -733,6 +736,12 @@ static inline int of_count_phandle_with_
- 	return -ENOSYS;
- }
- 
-+static inline ssize_t of_modalias(const struct device_node *np, char *str,
-+				  ssize_t len)
-+{
-+	return -ENODEV;
-+}
-+
- static inline int of_phandle_iterator_init(struct of_phandle_iterator *it,
- 					   const struct device_node *np,
- 					   const char *list_name,
diff --git a/target/linux/generic/backport-6.1/828-v6.4-0005-of-Move-the-request-module-helper-logic-to-module.c.patch b/target/linux/generic/backport-6.1/828-v6.4-0005-of-Move-the-request-module-helper-logic-to-module.c.patch
deleted file mode 100644
index 67dcea0d19d0..000000000000
--- a/target/linux/generic/backport-6.1/828-v6.4-0005-of-Move-the-request-module-helper-logic-to-module.c.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From e6506f06d5e82765666902ccf9e9162f3e31d518 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 4 Apr 2023 18:21:18 +0100
-Subject: [PATCH] of: Move the request module helper logic to module.c
-
-Depending on device.c for pure OF handling is considered
-backwards. Let's extract the content of of_device_request_module() to
-have the real logic under module.c.
-
-The next step will be to convert users of of_device_request_module() to
-use the new helper.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20230404172148.82422-11-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/of/device.c | 25 ++-----------------------
- drivers/of/module.c | 30 ++++++++++++++++++++++++++++++
- include/linux/of.h  |  6 ++++++
- 3 files changed, 38 insertions(+), 23 deletions(-)
-
---- a/drivers/of/device.c
-+++ b/drivers/of/device.c
-@@ -8,7 +8,6 @@
- #include <linux/dma-direct.h> /* for bus_dma_region */
- #include <linux/dma-map-ops.h>
- #include <linux/init.h>
--#include <linux/module.h>
- #include <linux/mod_devicetable.h>
- #include <linux/slab.h>
- #include <linux/platform_device.h>
-@@ -249,30 +248,10 @@ EXPORT_SYMBOL(of_device_get_match_data);
- 
- int of_device_request_module(struct device *dev)
- {
--	char *str;
--	ssize_t size;
--	int ret;
--
--	if (!dev || !dev->of_node)
-+	if (!dev)
- 		return -ENODEV;
- 
--	size = of_modalias(dev->of_node, NULL, 0);
--	if (size < 0)
--		return size;
--
--	/* Reserve an additional byte for the trailing '\0' */
--	size++;
--
--	str = kmalloc(size, GFP_KERNEL);
--	if (!str)
--		return -ENOMEM;
--
--	of_modalias(dev->of_node, str, size);
--	str[size - 1] = '\0';
--	ret = request_module(str);
--	kfree(str);
--
--	return ret;
-+	return of_request_module(dev->of_node);
- }
- EXPORT_SYMBOL_GPL(of_device_request_module);
- 
---- a/drivers/of/module.c
-+++ b/drivers/of/module.c
-@@ -4,6 +4,7 @@
-  */
- 
- #include <linux/of.h>
-+#include <linux/module.h>
- #include <linux/slab.h>
- #include <linux/string.h>
- 
-@@ -42,3 +43,32 @@ ssize_t of_modalias(const struct device_
- 
- 	return tsize;
- }
-+
-+int of_request_module(const struct device_node *np)
-+{
-+	char *str;
-+	ssize_t size;
-+	int ret;
-+
-+	if (!np)
-+		return -ENODEV;
-+
-+	size = of_modalias(np, NULL, 0);
-+	if (size < 0)
-+		return size;
-+
-+	/* Reserve an additional byte for the trailing '\0' */
-+	size++;
-+
-+	str = kmalloc(size, GFP_KERNEL);
-+	if (!str)
-+		return -ENOMEM;
-+
-+	of_modalias(np, str, size);
-+	str[size - 1] = '\0';
-+	ret = request_module(str);
-+	kfree(str);
-+
-+	return ret;
-+}
-+EXPORT_SYMBOL_GPL(of_request_module);
---- a/include/linux/of.h
-+++ b/include/linux/of.h
-@@ -378,6 +378,7 @@ extern int of_count_phandle_with_args(co
- 
- /* module functions */
- extern ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len);
-+extern int of_request_module(const struct device_node *np);
- 
- /* phandle iterator functions */
- extern int of_phandle_iterator_init(struct of_phandle_iterator *it,
-@@ -741,6 +742,11 @@ static inline ssize_t of_modalias(const
- {
- 	return -ENODEV;
- }
-+
-+static inline int of_request_module(const struct device_node *np)
-+{
-+	return -ENODEV;
-+}
- 
- static inline int of_phandle_iterator_init(struct of_phandle_iterator *it,
- 					   const struct device_node *np,
diff --git a/target/linux/generic/backport-6.1/829-v6.10-0001-nvmem-layouts-store-owner-from-modules-with-nvmem_la.patch b/target/linux/generic/backport-6.1/829-v6.10-0001-nvmem-layouts-store-owner-from-modules-with-nvmem_la.patch
deleted file mode 100644
index c15b4b2265e7..000000000000
--- a/target/linux/generic/backport-6.1/829-v6.10-0001-nvmem-layouts-store-owner-from-modules-with-nvmem_la.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 6d0ca4a2a7e25f9ad07c1f335f20b4d9e048cdd5 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 30 Apr 2024 09:49:11 +0100
-Subject: [PATCH] nvmem: layouts: store owner from modules with
- nvmem_layout_driver_register()
-
-Modules registering driver with nvmem_layout_driver_register() might
-forget to set .owner field.  The field is used by some of other kernel
-parts for reference counting (try_module_get()), so it is expected that
-drivers will set it.
-
-Solve the problem by moving this task away from the drivers to the core
-code, just like we did for platform_driver in
-commit 9447057eaff8 ("platform_device: use a macro instead of
-platform_driver_register").
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Michael Walle <mwalle@kernel.org>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240430084921.33387-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts.c        | 6 ++++--
- include/linux/nvmem-provider.h | 5 ++++-
- 2 files changed, 8 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/layouts.c
-+++ b/drivers/nvmem/layouts.c
-@@ -52,13 +52,15 @@ static struct bus_type nvmem_layout_bus_
- 	.remove		= nvmem_layout_bus_remove,
- };
- 
--int nvmem_layout_driver_register(struct nvmem_layout_driver *drv)
-+int __nvmem_layout_driver_register(struct nvmem_layout_driver *drv,
-+				   struct module *owner)
- {
- 	drv->driver.bus = &nvmem_layout_bus_type;
-+	drv->driver.owner = owner;
- 
- 	return driver_register(&drv->driver);
- }
--EXPORT_SYMBOL_GPL(nvmem_layout_driver_register);
-+EXPORT_SYMBOL_GPL(__nvmem_layout_driver_register);
- 
- void nvmem_layout_driver_unregister(struct nvmem_layout_driver *drv)
- {
---- a/include/linux/nvmem-provider.h
-+++ b/include/linux/nvmem-provider.h
-@@ -199,7 +199,10 @@ int nvmem_add_one_cell(struct nvmem_devi
- int nvmem_layout_register(struct nvmem_layout *layout);
- void nvmem_layout_unregister(struct nvmem_layout *layout);
- 
--int nvmem_layout_driver_register(struct nvmem_layout_driver *drv);
-+#define nvmem_layout_driver_register(drv) \
-+	__nvmem_layout_driver_register(drv, THIS_MODULE)
-+int __nvmem_layout_driver_register(struct nvmem_layout_driver *drv,
-+				   struct module *owner);
- void nvmem_layout_driver_unregister(struct nvmem_layout_driver *drv);
- #define module_nvmem_layout_driver(__nvmem_layout_driver)		\
- 	module_driver(__nvmem_layout_driver, nvmem_layout_driver_register, \
diff --git a/target/linux/generic/backport-6.1/829-v6.10-0002-nvmem-layouts-onie-tlv-drop-driver-owner-initializat.patch b/target/linux/generic/backport-6.1/829-v6.10-0002-nvmem-layouts-onie-tlv-drop-driver-owner-initializat.patch
deleted file mode 100644
index b483dd243b94..000000000000
--- a/target/linux/generic/backport-6.1/829-v6.10-0002-nvmem-layouts-onie-tlv-drop-driver-owner-initializat.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 21833338eccb91194fec6ba7548d9c454824eca0 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 30 Apr 2024 09:49:12 +0100
-Subject: [PATCH] nvmem: layouts: onie-tlv: drop driver owner initialization
-
-Core in nvmem_layout_driver_register() already sets the .owner, so
-driver does not need to.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Michael Walle <mwalle@kernel.org>
-Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240430084921.33387-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/onie-tlv.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/nvmem/layouts/onie-tlv.c
-+++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -247,7 +247,6 @@ MODULE_DEVICE_TABLE(of, onie_tlv_of_matc
- 
- static struct nvmem_layout_driver onie_tlv_layout = {
- 	.driver = {
--		.owner = THIS_MODULE,
- 		.name = "onie-tlv-layout",
- 		.of_match_table = onie_tlv_of_match_table,
- 	},
diff --git a/target/linux/generic/backport-6.1/829-v6.10-0003-nvmem-layouts-sl28vpd-drop-driver-owner-initializati.patch b/target/linux/generic/backport-6.1/829-v6.10-0003-nvmem-layouts-sl28vpd-drop-driver-owner-initializati.patch
deleted file mode 100644
index 472a65feca0c..000000000000
--- a/target/linux/generic/backport-6.1/829-v6.10-0003-nvmem-layouts-sl28vpd-drop-driver-owner-initializati.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 23fd602f21953c03c0714257d36685cd6b486f04 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 30 Apr 2024 09:49:13 +0100
-Subject: [PATCH] nvmem: layouts: sl28vpd: drop driver owner initialization
-
-Core in nvmem_layout_driver_register() already sets the .owner, so
-driver does not need to.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Michael Walle <mwalle@kernel.org>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240430084921.33387-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/layouts/sl28vpd.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/nvmem/layouts/sl28vpd.c
-+++ b/drivers/nvmem/layouts/sl28vpd.c
-@@ -156,7 +156,6 @@ MODULE_DEVICE_TABLE(of, sl28vpd_of_match
- 
- static struct nvmem_layout_driver sl28vpd_layout = {
- 	.driver = {
--		.owner = THIS_MODULE,
- 		.name = "kontron-sl28vpd-layout",
- 		.of_match_table = sl28vpd_of_match_table,
- 	},
diff --git a/target/linux/generic/backport-6.1/829-v6.10-0004-nvmem-sc27xx-fix-module-autoloading.patch b/target/linux/generic/backport-6.1/829-v6.10-0004-nvmem-sc27xx-fix-module-autoloading.patch
deleted file mode 100644
index 2aa13a5c6463..000000000000
--- a/target/linux/generic/backport-6.1/829-v6.10-0004-nvmem-sc27xx-fix-module-autoloading.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From dc3d88ade857ba3dca34f008e0b0aed3ef79cb15 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzk@kernel.org>
-Date: Tue, 30 Apr 2024 09:49:14 +0100
-Subject: [PATCH] nvmem: sc27xx: fix module autoloading
-
-Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
-based on the alias from of_device_id table.
-
-Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240430084921.33387-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sc27xx-efuse.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/sc27xx-efuse.c
-+++ b/drivers/nvmem/sc27xx-efuse.c
-@@ -263,6 +263,7 @@ static const struct of_device_id sc27xx_
- 	{ .compatible = "sprd,sc2730-efuse", .data = &sc2730_edata},
- 	{ }
- };
-+MODULE_DEVICE_TABLE(of, sc27xx_efuse_of_match);
- 
- static struct platform_driver sc27xx_efuse_driver = {
- 	.probe = sc27xx_efuse_probe,
diff --git a/target/linux/generic/backport-6.1/829-v6.10-0005-nvmem-sprd-fix-module-autoloading.patch b/target/linux/generic/backport-6.1/829-v6.10-0005-nvmem-sprd-fix-module-autoloading.patch
deleted file mode 100644
index 0953c92340c3..000000000000
--- a/target/linux/generic/backport-6.1/829-v6.10-0005-nvmem-sprd-fix-module-autoloading.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 154c1ec943e34f3188c9305b0c91d5e7dc1373b8 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzk@kernel.org>
-Date: Tue, 30 Apr 2024 09:49:15 +0100
-Subject: [PATCH] nvmem: sprd: fix module autoloading
-
-Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
-based on the alias from of_device_id table.
-
-Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240430084921.33387-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sprd-efuse.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/sprd-efuse.c
-+++ b/drivers/nvmem/sprd-efuse.c
-@@ -426,6 +426,7 @@ static const struct of_device_id sprd_ef
- 	{ .compatible = "sprd,ums312-efuse", .data = &ums312_data },
- 	{ }
- };
-+MODULE_DEVICE_TABLE(of, sprd_efuse_of_match);
- 
- static struct platform_driver sprd_efuse_driver = {
- 	.probe = sprd_efuse_probe,
diff --git a/target/linux/generic/backport-6.1/829-v6.10-0006-nvmem-core-switch-to-use-device_add_groups.patch b/target/linux/generic/backport-6.1/829-v6.10-0006-nvmem-core-switch-to-use-device_add_groups.patch
deleted file mode 100644
index 4de97af6acbe..000000000000
--- a/target/linux/generic/backport-6.1/829-v6.10-0006-nvmem-core-switch-to-use-device_add_groups.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 8d8fc146dd7a0d6a6b37695747a524310dfb9d57 Mon Sep 17 00:00:00 2001
-From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Date: Tue, 30 Apr 2024 09:49:16 +0100
-Subject: [PATCH] nvmem: core: switch to use device_add_groups()
-
-devm_device_add_groups() is being removed from the kernel, so move the
-nvmem driver to use device_add_groups() instead.  The logic is
-identical, when the device is removed the driver core will properly
-clean up and remove the groups, and the memory used by the attribute
-groups will be freed because it was created with dev_* calls, so this is
-functionally identical overall.
-
-Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Link: https://lore.kernel.org/r/20240430084921.33387-7-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -477,7 +477,7 @@ static int nvmem_populate_sysfs_cells(st
- 
- 	nvmem_cells_group.bin_attrs = cells_attrs;
- 
--	ret = devm_device_add_groups(&nvmem->dev, nvmem_cells_groups);
-+	ret = device_add_groups(&nvmem->dev, nvmem_cells_groups);
- 	if (ret)
- 		goto unlock_mutex;
- 
diff --git a/target/linux/generic/backport-6.1/829-v6.10-0007-nvmem-lpc18xx_eeprom-Convert-to-platform-remove-call.patch b/target/linux/generic/backport-6.1/829-v6.10-0007-nvmem-lpc18xx_eeprom-Convert-to-platform-remove-call.patch
deleted file mode 100644
index 27d9270d31ee..000000000000
--- a/target/linux/generic/backport-6.1/829-v6.10-0007-nvmem-lpc18xx_eeprom-Convert-to-platform-remove-call.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 693d2f629962628ddefc88f4b6b453edda5ac32e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
-Date: Tue, 30 Apr 2024 09:49:17 +0100
-Subject: [PATCH] nvmem: lpc18xx_eeprom: Convert to platform remove callback
- returning void
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The .remove() callback for a platform driver returns an int which makes
-many driver authors wrongly assume it's possible to do error handling by
-returning an error code. However the value returned is ignored (apart
-from emitting a warning) and this typically results in resource leaks.
-
-To improve here there is a quest to make the remove callback return
-void. In the first step of this quest all drivers are converted to
-.remove_new(), which already returns void. Eventually after all drivers
-are converted, .remove_new() will be renamed to .remove().
-
-Trivially convert this driver from always returning zero in the remove
-callback to the void returning variant.
-
-Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-Acked-by: Vladimir Zapolskiy <vz@mleia.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240430084921.33387-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/lpc18xx_eeprom.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/nvmem/lpc18xx_eeprom.c
-+++ b/drivers/nvmem/lpc18xx_eeprom.c
-@@ -249,13 +249,11 @@ err_clk:
- 	return ret;
- }
- 
--static int lpc18xx_eeprom_remove(struct platform_device *pdev)
-+static void lpc18xx_eeprom_remove(struct platform_device *pdev)
- {
- 	struct lpc18xx_eeprom_dev *eeprom = platform_get_drvdata(pdev);
- 
- 	clk_disable_unprepare(eeprom->clk);
--
--	return 0;
- }
- 
- static const struct of_device_id lpc18xx_eeprom_of_match[] = {
-@@ -266,7 +264,7 @@ MODULE_DEVICE_TABLE(of, lpc18xx_eeprom_o
- 
- static struct platform_driver lpc18xx_eeprom_driver = {
- 	.probe = lpc18xx_eeprom_probe,
--	.remove = lpc18xx_eeprom_remove,
-+	.remove_new = lpc18xx_eeprom_remove,
- 	.driver = {
- 		.name = "lpc18xx-eeprom",
- 		.of_match_table = lpc18xx_eeprom_of_match,
diff --git a/target/linux/generic/backport-6.1/829-v6.10-0008-nvmem-meson-mx-efuse-Remove-nvmem_device-from-efuse-.patch b/target/linux/generic/backport-6.1/829-v6.10-0008-nvmem-meson-mx-efuse-Remove-nvmem_device-from-efuse-.patch
deleted file mode 100644
index 7770052d97d6..000000000000
--- a/target/linux/generic/backport-6.1/829-v6.10-0008-nvmem-meson-mx-efuse-Remove-nvmem_device-from-efuse-.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 2a1ad6b75292d38aa2f6ded7335979e0632521da Mon Sep 17 00:00:00 2001
-From: Mukesh Ojha <quic_mojha@quicinc.com>
-Date: Tue, 30 Apr 2024 09:49:21 +0100
-Subject: [PATCH] nvmem: meson-mx-efuse: Remove nvmem_device from efuse struct
-
-nvmem_device is used at one place while registering nvmem
-device and it is not required to be present in efuse struct
-for just this purpose.
-
-Drop nvmem_device and manage with nvmem device stack variable.
-
-Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
-Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240430084921.33387-12-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/meson-mx-efuse.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/meson-mx-efuse.c
-+++ b/drivers/nvmem/meson-mx-efuse.c
-@@ -44,7 +44,6 @@ struct meson_mx_efuse_platform_data {
- struct meson_mx_efuse {
- 	void __iomem *base;
- 	struct clk *core_clk;
--	struct nvmem_device *nvmem;
- 	struct nvmem_config config;
- };
- 
-@@ -194,6 +193,7 @@ static int meson_mx_efuse_probe(struct p
- {
- 	const struct meson_mx_efuse_platform_data *drvdata;
- 	struct meson_mx_efuse *efuse;
-+	struct nvmem_device *nvmem;
- 
- 	drvdata = of_device_get_match_data(&pdev->dev);
- 	if (!drvdata)
-@@ -224,9 +224,9 @@ static int meson_mx_efuse_probe(struct p
- 		return PTR_ERR(efuse->core_clk);
- 	}
- 
--	efuse->nvmem = devm_nvmem_register(&pdev->dev, &efuse->config);
-+	nvmem = devm_nvmem_register(&pdev->dev, &efuse->config);
- 
--	return PTR_ERR_OR_ZERO(efuse->nvmem);
-+	return PTR_ERR_OR_ZERO(nvmem);
- }
- 
- static struct platform_driver meson_mx_efuse_driver = {
diff --git a/target/linux/generic/backport-6.1/830-00-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch b/target/linux/generic/backport-6.1/830-00-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch
deleted file mode 100644
index 3319f431bacc..000000000000
--- a/target/linux/generic/backport-6.1/830-00-v6.2-dt-bindings-arm-qcom-document-qcom-msm-id-and-qcom-b.patch
+++ /dev/null
@@ -1,207 +0,0 @@
-From 77faa07c185c969e742cbb3e6aa487a11b0b616c Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Tue, 30 Aug 2022 09:57:42 +0300
-Subject: [PATCH] dt-bindings: arm: qcom: document qcom,msm-id and
- qcom,board-id
-
-The top level qcom,msm-id and qcom,board-id properties are utilized by
-bootloaders on Qualcomm MSM platforms to determine which device tree
-should be used and passed to the kernel.
-
-The commit b32e592d3c28 ("devicetree: bindings: Document qcom board
-compatible format") from 2015 was a consensus during discussion about
-upstreaming qcom,msm-id and qcom,board-id fields.  There are however still
-problems with that consensus:
-1. It was reached 7 years ago but it turned out its implementation did
-   not reach all possible products.
-
-2. Initially additional tool (dtbTool) was needed for parsing these
-   fields to create a QCDT image consisting of multiple DTBs, later the
-   bootloaders were improved and they use these qcom,msm-id and
-   qcom,board-id properties directly.
-
-3. Extracting relevant information from the board compatible requires
-   this additional tool (dtbTool), which makes the build process more
-   complicated and not easily reproducible (DTBs are modified after the
-   kernel build).
-
-4. Some versions of Qualcomm bootloaders expect these properties even
-   when booting with a single DTB.  The community is stuck with these
-   bootloaders thus they require properties in the DTBs.
-
-Since several upstreamed Qualcomm SoC-based boards require these
-properties to properly boot and the properties are reportedly used by
-bootloaders, document them along with the bindings header with constants
-used by: bootloader, some DTS and socinfo driver.
-
-Link: https://lore.kernel.org/r/a3c932d1-a102-ce18-deea-18cbbd05ecab@linaro.org/
-Co-developed-by: Kumar Gala <galak@codeaurora.org>
-Signed-off-by: Kumar Gala <galak@codeaurora.org>
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220830065744.161163-2-krzysztof.kozlowski@linaro.org
----
- include/dt-bindings/arm/qcom,ids.h | 155 +++++++++++++++++++++++++++++
- 1 file changed, 155 insertions(+)
- create mode 100644 include/dt-bindings/arm/qcom,ids.h
-
---- /dev/null
-+++ b/include/dt-bindings/arm/qcom,ids.h
-@@ -0,0 +1,155 @@
-+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ * Copyright (c) 2022 Linaro Ltd
-+ * Author: Krzysztof Kozlowski <krzk@kernel.org> based on previous work of Kumar Gala.
-+ */
-+#ifndef _DT_BINDINGS_ARM_QCOM_IDS_H
-+#define _DT_BINDINGS_ARM_QCOM_IDS_H
-+
-+/*
-+ * The MSM chipset and hardware revision used by Qualcomm bootloaders, DTS for
-+ * older chipsets (qcom,msm-id) and in socinfo driver:
-+ */
-+#define QCOM_ID_MSM8960			87
-+#define QCOM_ID_APQ8064			109
-+#define QCOM_ID_MSM8660A		122
-+#define QCOM_ID_MSM8260A		123
-+#define QCOM_ID_APQ8060A		124
-+#define QCOM_ID_MSM8974			126
-+#define QCOM_ID_MPQ8064			130
-+#define QCOM_ID_MSM8960AB		138
-+#define QCOM_ID_APQ8060AB		139
-+#define QCOM_ID_MSM8260AB		140
-+#define QCOM_ID_MSM8660AB		141
-+#define QCOM_ID_MSM8626			145
-+#define QCOM_ID_MSM8610			147
-+#define QCOM_ID_APQ8064AB		153
-+#define QCOM_ID_MSM8226			158
-+#define QCOM_ID_MSM8526			159
-+#define QCOM_ID_MSM8110			161
-+#define QCOM_ID_MSM8210			162
-+#define QCOM_ID_MSM8810			163
-+#define QCOM_ID_MSM8212			164
-+#define QCOM_ID_MSM8612			165
-+#define QCOM_ID_MSM8112			166
-+#define QCOM_ID_MSM8225Q		168
-+#define QCOM_ID_MSM8625Q		169
-+#define QCOM_ID_MSM8125Q		170
-+#define QCOM_ID_APQ8064AA		172
-+#define QCOM_ID_APQ8084			178
-+#define QCOM_ID_APQ8074			184
-+#define QCOM_ID_MSM8274			185
-+#define QCOM_ID_MSM8674			186
-+#define QCOM_ID_MSM8974PRO_AC		194
-+#define QCOM_ID_MSM8126			198
-+#define QCOM_ID_APQ8026			199
-+#define QCOM_ID_MSM8926			200
-+#define QCOM_ID_MSM8326			205
-+#define QCOM_ID_MSM8916			206
-+#define QCOM_ID_MSM8994			207
-+#define QCOM_ID_APQ8074PRO_AA		208
-+#define QCOM_ID_APQ8074PRO_AB		209
-+#define QCOM_ID_APQ8074PRO_AC		210
-+#define QCOM_ID_MSM8274PRO_AA		211
-+#define QCOM_ID_MSM8274PRO_AB		212
-+#define QCOM_ID_MSM8274PRO_AC		213
-+#define QCOM_ID_MSM8674PRO_AA		214
-+#define QCOM_ID_MSM8674PRO_AB		215
-+#define QCOM_ID_MSM8674PRO_AC		216
-+#define QCOM_ID_MSM8974PRO_AA		217
-+#define QCOM_ID_MSM8974PRO_AB		218
-+#define QCOM_ID_APQ8028			219
-+#define QCOM_ID_MSM8128			220
-+#define QCOM_ID_MSM8228			221
-+#define QCOM_ID_MSM8528			222
-+#define QCOM_ID_MSM8628			223
-+#define QCOM_ID_MSM8928			224
-+#define QCOM_ID_MSM8510			225
-+#define QCOM_ID_MSM8512			226
-+#define QCOM_ID_MSM8936			233
-+#define QCOM_ID_MSM8939			239
-+#define QCOM_ID_APQ8036			240
-+#define QCOM_ID_APQ8039			241
-+#define QCOM_ID_MSM8996			246
-+#define QCOM_ID_APQ8016			247
-+#define QCOM_ID_MSM8216			248
-+#define QCOM_ID_MSM8116			249
-+#define QCOM_ID_MSM8616			250
-+#define QCOM_ID_MSM8992			251
-+#define QCOM_ID_APQ8094			253
-+#define QCOM_ID_MDM9607			290
-+#define QCOM_ID_APQ8096			291
-+#define QCOM_ID_MSM8998			292
-+#define QCOM_ID_MSM8953			293
-+#define QCOM_ID_MDM8207			296
-+#define QCOM_ID_MDM9207			297
-+#define QCOM_ID_MDM9307			298
-+#define QCOM_ID_MDM9628			299
-+#define QCOM_ID_APQ8053			304
-+#define QCOM_ID_MSM8996SG		305
-+#define QCOM_ID_MSM8996AU		310
-+#define QCOM_ID_APQ8096AU		311
-+#define QCOM_ID_APQ8096SG		312
-+#define QCOM_ID_SDM660			317
-+#define QCOM_ID_SDM630			318
-+#define QCOM_ID_APQ8098			319
-+#define QCOM_ID_SDM845			321
-+#define QCOM_ID_MDM9206			322
-+#define QCOM_ID_IPQ8074			323
-+#define QCOM_ID_SDA660			324
-+#define QCOM_ID_SDM658			325
-+#define QCOM_ID_SDA658			326
-+#define QCOM_ID_SDA630			327
-+#define QCOM_ID_SDM450			338
-+#define QCOM_ID_SDA845			341
-+#define QCOM_ID_IPQ8072			342
-+#define QCOM_ID_IPQ8076			343
-+#define QCOM_ID_IPQ8078			344
-+#define QCOM_ID_SDM636			345
-+#define QCOM_ID_SDA636			346
-+#define QCOM_ID_SDM632			349
-+#define QCOM_ID_SDA632			350
-+#define QCOM_ID_SDA450			351
-+#define QCOM_ID_SM8250			356
-+#define QCOM_ID_IPQ8070			375
-+#define QCOM_ID_IPQ8071			376
-+#define QCOM_ID_IPQ8072A		389
-+#define QCOM_ID_IPQ8074A		390
-+#define QCOM_ID_IPQ8076A		391
-+#define QCOM_ID_IPQ8078A		392
-+#define QCOM_ID_SM6125			394
-+#define QCOM_ID_IPQ8070A		395
-+#define QCOM_ID_IPQ8071A		396
-+#define QCOM_ID_IPQ6018			402
-+#define QCOM_ID_IPQ6028			403
-+#define QCOM_ID_IPQ6000			421
-+#define QCOM_ID_IPQ6010			422
-+#define QCOM_ID_SC7180			425
-+#define QCOM_ID_SM6350			434
-+#define QCOM_ID_SM8350			439
-+#define QCOM_ID_SC8280XP		449
-+#define QCOM_ID_IPQ6005			453
-+#define QCOM_ID_QRB5165			455
-+#define QCOM_ID_SM8450			457
-+#define QCOM_ID_SM7225			459
-+#define QCOM_ID_SA8295P			460
-+#define QCOM_ID_SA8540P			461
-+#define QCOM_ID_SM8450_2		480
-+#define QCOM_ID_SM8450_3		482
-+#define QCOM_ID_SC7280			487
-+#define QCOM_ID_SC7180P			495
-+#define QCOM_ID_SM6375			507
-+
-+/*
-+ * The board type and revision information, used by Qualcomm bootloaders and
-+ * DTS for older chipsets (qcom,board-id):
-+ */
-+#define QCOM_BOARD_ID(a, major, minor) \
-+	(((major & 0xff) << 16) | ((minor & 0xff) << 8) | QCOM_BOARD_ID_##a)
-+
-+#define QCOM_BOARD_ID_MTP			8
-+#define QCOM_BOARD_ID_DRAGONBOARD		10
-+#define QCOM_BOARD_ID_SBC			24
-+
-+#endif /* _DT_BINDINGS_ARM_QCOM_IDS_H */
diff --git a/target/linux/generic/backport-6.1/830-01-v6.5-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch b/target/linux/generic/backport-6.1/830-01-v6.5-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch
deleted file mode 100644
index 394087a27a4d..000000000000
--- a/target/linux/generic/backport-6.1/830-01-v6.5-soc-qcom-socinfo-move-SMEM-item-struct-and-defines-t.patch
+++ /dev/null
@@ -1,171 +0,0 @@
-From 7cbff3c3f867ff3b24de674f44ca03f54e416a37 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sat, 31 Dec 2022 00:27:42 +0100
-Subject: [PATCH] soc: qcom: socinfo: move SMEM item struct and defines to a
- header
-
-Move SMEM item struct and related defines to a header in order to be able
-to reuse them in the Qualcomm NVMEM CPUFreq driver instead of duplicating
-them.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20230526204802.3081168-1-robimarko@gmail.com
----
- drivers/soc/qcom/socinfo.c       | 58 +--------------------------
- include/linux/soc/qcom/socinfo.h | 67 ++++++++++++++++++++++++++++++++
- 2 files changed, 68 insertions(+), 57 deletions(-)
- create mode 100644 include/linux/soc/qcom/socinfo.h
-
---- a/drivers/soc/qcom/socinfo.c
-+++ b/drivers/soc/qcom/socinfo.c
-@@ -11,6 +11,7 @@
- #include <linux/random.h>
- #include <linux/slab.h>
- #include <linux/soc/qcom/smem.h>
-+#include <linux/soc/qcom/socinfo.h>
- #include <linux/string.h>
- #include <linux/sys_soc.h>
- #include <linux/types.h>
-@@ -25,15 +26,6 @@
- #define SOCINFO_MINOR(ver) ((ver) & 0xffff)
- #define SOCINFO_VERSION(maj, min)  ((((maj) & 0xffff) << 16)|((min) & 0xffff))
- 
--#define SMEM_SOCINFO_BUILD_ID_LENGTH           32
--#define SMEM_SOCINFO_CHIP_ID_LENGTH            32
--
--/*
-- * SMEM item id, used to acquire handles to respective
-- * SMEM region.
-- */
--#define SMEM_HW_SW_BUILD_ID            137
--
- #ifdef CONFIG_DEBUG_FS
- #define SMEM_IMAGE_VERSION_BLOCKS_COUNT        32
- #define SMEM_IMAGE_VERSION_SIZE                4096
-@@ -116,54 +108,6 @@ static const char *const pmic_models[] =
- };
- #endif /* CONFIG_DEBUG_FS */
- 
--/* Socinfo SMEM item structure */
--struct socinfo {
--	__le32 fmt;
--	__le32 id;
--	__le32 ver;
--	char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH];
--	/* Version 2 */
--	__le32 raw_id;
--	__le32 raw_ver;
--	/* Version 3 */
--	__le32 hw_plat;
--	/* Version 4 */
--	__le32 plat_ver;
--	/* Version 5 */
--	__le32 accessory_chip;
--	/* Version 6 */
--	__le32 hw_plat_subtype;
--	/* Version 7 */
--	__le32 pmic_model;
--	__le32 pmic_die_rev;
--	/* Version 8 */
--	__le32 pmic_model_1;
--	__le32 pmic_die_rev_1;
--	__le32 pmic_model_2;
--	__le32 pmic_die_rev_2;
--	/* Version 9 */
--	__le32 foundry_id;
--	/* Version 10 */
--	__le32 serial_num;
--	/* Version 11 */
--	__le32 num_pmics;
--	__le32 pmic_array_offset;
--	/* Version 12 */
--	__le32 chip_family;
--	__le32 raw_device_family;
--	__le32 raw_device_num;
--	/* Version 13 */
--	__le32 nproduct_id;
--	char chip_id[SMEM_SOCINFO_CHIP_ID_LENGTH];
--	/* Version 14 */
--	__le32 num_clusters;
--	__le32 ncluster_array_offset;
--	__le32 num_defective_parts;
--	__le32 ndefective_parts_array_offset;
--	/* Version 15 */
--	__le32 nmodem_supported;
--};
--
- #ifdef CONFIG_DEBUG_FS
- struct socinfo_params {
- 	u32 raw_device_family;
---- /dev/null
-+++ b/include/linux/soc/qcom/socinfo.h
-@@ -0,0 +1,67 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2009-2017, The Linux Foundation. All rights reserved.
-+ * Copyright (c) 2017-2019, Linaro Ltd.
-+ */
-+
-+#ifndef __QCOM_SOCINFO_H__
-+#define __QCOM_SOCINFO_H__
-+
-+/*
-+ * SMEM item id, used to acquire handles to respective
-+ * SMEM region.
-+ */
-+#define SMEM_HW_SW_BUILD_ID		137
-+
-+#define SMEM_SOCINFO_BUILD_ID_LENGTH	32
-+#define SMEM_SOCINFO_CHIP_ID_LENGTH	32
-+
-+/* Socinfo SMEM item structure */
-+struct socinfo {
-+	__le32 fmt;
-+	__le32 id;
-+	__le32 ver;
-+	char build_id[SMEM_SOCINFO_BUILD_ID_LENGTH];
-+	/* Version 2 */
-+	__le32 raw_id;
-+	__le32 raw_ver;
-+	/* Version 3 */
-+	__le32 hw_plat;
-+	/* Version 4 */
-+	__le32 plat_ver;
-+	/* Version 5 */
-+	__le32 accessory_chip;
-+	/* Version 6 */
-+	__le32 hw_plat_subtype;
-+	/* Version 7 */
-+	__le32 pmic_model;
-+	__le32 pmic_die_rev;
-+	/* Version 8 */
-+	__le32 pmic_model_1;
-+	__le32 pmic_die_rev_1;
-+	__le32 pmic_model_2;
-+	__le32 pmic_die_rev_2;
-+	/* Version 9 */
-+	__le32 foundry_id;
-+	/* Version 10 */
-+	__le32 serial_num;
-+	/* Version 11 */
-+	__le32 num_pmics;
-+	__le32 pmic_array_offset;
-+	/* Version 12 */
-+	__le32 chip_family;
-+	__le32 raw_device_family;
-+	__le32 raw_device_num;
-+	/* Version 13 */
-+	__le32 nproduct_id;
-+	char chip_id[SMEM_SOCINFO_CHIP_ID_LENGTH];
-+	/* Version 14 */
-+	__le32 num_clusters;
-+	__le32 ncluster_array_offset;
-+	__le32 num_defective_parts;
-+	__le32 ndefective_parts_array_offset;
-+	/* Version 15 */
-+	__le32 nmodem_supported;
-+};
-+
-+#endif
diff --git a/target/linux/generic/backport-6.1/830-02-v6.5-soc-qcom-smem-Switch-to-EXPORT_SYMBOL_GPL.patch b/target/linux/generic/backport-6.1/830-02-v6.5-soc-qcom-smem-Switch-to-EXPORT_SYMBOL_GPL.patch
deleted file mode 100644
index 7c7c3f3635cd..000000000000
--- a/target/linux/generic/backport-6.1/830-02-v6.5-soc-qcom-smem-Switch-to-EXPORT_SYMBOL_GPL.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 9f1bbff157a69db7684f5da2f73b2325c638a90e Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 26 May 2023 22:47:59 +0200
-Subject: [PATCH] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL()
-
-SMEM has been GPL licensed from the start, and there is no reason to use
-EXPORT_SYMBOL() so switch to the GPL version.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
-Reviewed-by: Trilok Soni <quic_tsoni@quicinc.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20230526204802.3081168-2-robimarko@gmail.com
----
- drivers/soc/qcom/smem.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/soc/qcom/smem.c
-+++ b/drivers/soc/qcom/smem.c
-@@ -500,7 +500,7 @@ int qcom_smem_alloc(unsigned host, unsig
- 
- 	return ret;
- }
--EXPORT_SYMBOL(qcom_smem_alloc);
-+EXPORT_SYMBOL_GPL(qcom_smem_alloc);
- 
- static void *qcom_smem_get_global(struct qcom_smem *smem,
- 				  unsigned item,
-@@ -674,7 +674,7 @@ void *qcom_smem_get(unsigned host, unsig
- 	return ptr;
- 
- }
--EXPORT_SYMBOL(qcom_smem_get);
-+EXPORT_SYMBOL_GPL(qcom_smem_get);
- 
- /**
-  * qcom_smem_get_free_space() - retrieve amount of free space in a partition
-@@ -719,7 +719,7 @@ int qcom_smem_get_free_space(unsigned ho
- 
- 	return ret;
- }
--EXPORT_SYMBOL(qcom_smem_get_free_space);
-+EXPORT_SYMBOL_GPL(qcom_smem_get_free_space);
- 
- static bool addr_in_range(void __iomem *base, size_t size, void *addr)
- {
-@@ -770,7 +770,7 @@ phys_addr_t qcom_smem_virt_to_phys(void
- 
- 	return 0;
- }
--EXPORT_SYMBOL(qcom_smem_virt_to_phys);
-+EXPORT_SYMBOL_GPL(qcom_smem_virt_to_phys);
- 
- static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
- {
diff --git a/target/linux/generic/backport-6.1/830-03-v6.5-soc-qcom-smem-introduce-qcom_smem_get_soc_id.patch b/target/linux/generic/backport-6.1/830-03-v6.5-soc-qcom-smem-introduce-qcom_smem_get_soc_id.patch
deleted file mode 100644
index 4a816bb0f976..000000000000
--- a/target/linux/generic/backport-6.1/830-03-v6.5-soc-qcom-smem-introduce-qcom_smem_get_soc_id.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From c3ecf2602a32d9b9e5fc997076c0d2836495c085 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 26 May 2023 22:48:00 +0200
-Subject: [PATCH] soc: qcom: smem: introduce qcom_smem_get_soc_id()
-
-Introduce a helper to return the SoC SMEM ID, which is used to identify the
-exact SoC model as there may be differences in the same SoC family.
-
-Currently, cpufreq-nvmem does this completely in the driver and there has
-been more interest expresed for other drivers to use this information so
-lets expose a common helper to prevent redoing it in individual drivers
-since this field is present on every SMEM table version.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20230526204802.3081168-3-robimarko@gmail.com
----
- drivers/soc/qcom/smem.c       | 23 +++++++++++++++++++++++
- include/linux/soc/qcom/smem.h |  2 ++
- 2 files changed, 25 insertions(+)
-
---- a/drivers/soc/qcom/smem.c
-+++ b/drivers/soc/qcom/smem.c
-@@ -14,6 +14,7 @@
- #include <linux/sizes.h>
- #include <linux/slab.h>
- #include <linux/soc/qcom/smem.h>
-+#include <linux/soc/qcom/socinfo.h>
- 
- /*
-  * The Qualcomm shared memory system is a allocate only heap structure that
-@@ -772,6 +773,28 @@ phys_addr_t qcom_smem_virt_to_phys(void
- }
- EXPORT_SYMBOL_GPL(qcom_smem_virt_to_phys);
- 
-+/**
-+ * qcom_smem_get_soc_id() - return the SoC ID
-+ * @id:	On success, we return the SoC ID here.
-+ *
-+ * Look up SoC ID from HW/SW build ID and return it.
-+ *
-+ * Return: 0 on success, negative errno on failure.
-+ */
-+int qcom_smem_get_soc_id(u32 *id)
-+{
-+	struct socinfo *info;
-+
-+	info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_HW_SW_BUILD_ID, NULL);
-+	if (IS_ERR(info))
-+		return PTR_ERR(info);
-+
-+	*id = __le32_to_cpu(info->id);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL_GPL(qcom_smem_get_soc_id);
-+
- static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
- {
- 	struct smem_header *header;
---- a/include/linux/soc/qcom/smem.h
-+++ b/include/linux/soc/qcom/smem.h
-@@ -11,4 +11,6 @@ int qcom_smem_get_free_space(unsigned ho
- 
- phys_addr_t qcom_smem_virt_to_phys(void *p);
- 
-+int qcom_smem_get_soc_id(u32 *id);
-+
- #endif
diff --git a/target/linux/generic/backport-6.1/830-04-v6.5-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch b/target/linux/generic/backport-6.1/830-04-v6.5-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch
deleted file mode 100644
index 25a718bd7eb4..000000000000
--- a/target/linux/generic/backport-6.1/830-04-v6.5-cpufreq-qcom-nvmem-use-SoC-ID-s-from-bindings.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 2b8634d1468ff498cc91b6adf993c27ae6fa079d Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 26 May 2023 22:48:01 +0200
-Subject: [PATCH] cpufreq: qcom-nvmem: use SoC ID-s from bindings
-
-SMEM SoC ID-s are now stored in DT bindings so lets use those instead of
-defining them in the driver again.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20230526204802.3081168-4-robimarko@gmail.com
----
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 15 +++++----------
- 1 file changed, 5 insertions(+), 10 deletions(-)
-
---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -30,12 +30,7 @@
- 
- #define MSM_ID_SMEM	137
- 
--enum _msm_id {
--	MSM8996V3 = 0xF6ul,
--	APQ8096V3 = 0x123ul,
--	MSM8996SG = 0x131ul,
--	APQ8096SG = 0x138ul,
--};
-+#include <dt-bindings/arm/qcom,ids.h>
- 
- enum _msm8996_version {
- 	MSM8996_V3,
-@@ -157,12 +152,12 @@ static enum _msm8996_version qcom_cpufre
- 	msm_id++;
- 
- 	switch ((enum _msm_id)*msm_id) {
--	case MSM8996V3:
--	case APQ8096V3:
-+	case QCOM_ID_MSM8996:
-+	case QCOM_ID_APQ8096:
- 		version = MSM8996_V3;
- 		break;
--	case MSM8996SG:
--	case APQ8096SG:
-+	case QCOM_ID_MSM8996SG:
-+	case QCOM_ID_APQ8096SG:
- 		version = MSM8996_SG;
- 		break;
- 	default:
diff --git a/target/linux/generic/backport-6.1/830-05-v6.5-cpufreq-qcom-nvmem-use-helper-to-get-SMEM-SoC-ID.patch b/target/linux/generic/backport-6.1/830-05-v6.5-cpufreq-qcom-nvmem-use-helper-to-get-SMEM-SoC-ID.patch
deleted file mode 100644
index 49d222662c9a..000000000000
--- a/target/linux/generic/backport-6.1/830-05-v6.5-cpufreq-qcom-nvmem-use-helper-to-get-SMEM-SoC-ID.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From e7992615acacc27baeec310197108143afc77337 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Fri, 26 May 2023 22:48:02 +0200
-Subject: [PATCH] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
-
-Now that SMEM exports a helper to get the SMEM SoC ID lets utilize it.
-Currently qcom_cpufreq_get_msm_id() is encoding the returned SMEM SoC ID
-into an enum, however there is no reason to do so and we can just match
-directly on the SMEM SoC ID as returned by qcom_smem_get_soc_id().
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20230526204802.3081168-5-robimarko@gmail.com
----
- drivers/cpufreq/qcom-cpufreq-nvmem.c | 56 +++++-----------------------
- 1 file changed, 10 insertions(+), 46 deletions(-)
-
---- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
-@@ -28,16 +28,8 @@
- #include <linux/slab.h>
- #include <linux/soc/qcom/smem.h>
- 
--#define MSM_ID_SMEM	137
--
- #include <dt-bindings/arm/qcom,ids.h>
- 
--enum _msm8996_version {
--	MSM8996_V3,
--	MSM8996_SG,
--	NUM_OF_MSM8996_VERSIONS,
--};
--
- struct qcom_cpufreq_drv;
- 
- struct qcom_cpufreq_match_data {
-@@ -138,60 +130,32 @@ static void get_krait_bin_format_b(struc
- 	dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
- }
- 
--static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
--{
--	size_t len;
--	u32 *msm_id;
--	enum _msm8996_version version;
--
--	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
--	if (IS_ERR(msm_id))
--		return NUM_OF_MSM8996_VERSIONS;
--
--	/* The first 4 bytes are format, next to them is the actual msm-id */
--	msm_id++;
--
--	switch ((enum _msm_id)*msm_id) {
--	case QCOM_ID_MSM8996:
--	case QCOM_ID_APQ8096:
--		version = MSM8996_V3;
--		break;
--	case QCOM_ID_MSM8996SG:
--	case QCOM_ID_APQ8096SG:
--		version = MSM8996_SG;
--		break;
--	default:
--		version = NUM_OF_MSM8996_VERSIONS;
--	}
--
--	return version;
--}
--
- static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
- 					  struct nvmem_cell *speedbin_nvmem,
- 					  char **pvs_name,
- 					  struct qcom_cpufreq_drv *drv)
- {
- 	size_t len;
-+	u32 msm_id;
- 	u8 *speedbin;
--	enum _msm8996_version msm8996_version;
-+	int ret;
- 	*pvs_name = NULL;
- 
--	msm8996_version = qcom_cpufreq_get_msm_id();
--	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
--		dev_err(cpu_dev, "Not Snapdragon 820/821!");
--		return -ENODEV;
--	}
-+	ret = qcom_smem_get_soc_id(&msm_id);
-+	if (ret)
-+		return ret;
- 
- 	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
- 	if (IS_ERR(speedbin))
- 		return PTR_ERR(speedbin);
- 
--	switch (msm8996_version) {
--	case MSM8996_V3:
-+	switch (msm_id) {
-+	case QCOM_ID_MSM8996:
-+	case QCOM_ID_APQ8096:
- 		drv->versions = 1 << (unsigned int)(*speedbin);
- 		break;
--	case MSM8996_SG:
-+	case QCOM_ID_MSM8996SG:
-+	case QCOM_ID_APQ8096SG:
- 		drv->versions = 1 << ((unsigned int)(*speedbin) + 4);
- 		break;
- 	default:
diff --git a/target/linux/generic/backport-6.1/831-v6.7-rtc-rtc7301-Support-byte-addressed-IO.patch b/target/linux/generic/backport-6.1/831-v6.7-rtc-rtc7301-Support-byte-addressed-IO.patch
deleted file mode 100644
index ddda6e4e7832..000000000000
--- a/target/linux/generic/backport-6.1/831-v6.7-rtc-rtc7301-Support-byte-addressed-IO.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From edd25a77e69b7c546c28077e5dffe72c54c0afe8 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 21 Sep 2023 22:18:12 +0200
-Subject: [PATCH 2/4] rtc: rtc7301: Support byte-addressed IO
-
-The old RTC7301 driver in OpenWrt used byte access, but the
-current mainline Linux driver uses 32bit word access.
-
-Make this configurable using device properties using the
-standard property "reg-io-width" in e.g. device tree.
-
-This is needed for the USRobotics USR8200 which has the
-chip connected using byte accesses.
-
-Debugging and testing by Howard Harte.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/rtc/rtc-r7301.c | 35 +++++++++++++++++++++++++++++++++--
- 1 file changed, 33 insertions(+), 2 deletions(-)
-
---- a/drivers/rtc/rtc-r7301.c
-+++ b/drivers/rtc/rtc-r7301.c
-@@ -14,6 +14,7 @@
- #include <linux/module.h>
- #include <linux/mod_devicetable.h>
- #include <linux/delay.h>
-+#include <linux/property.h>
- #include <linux/regmap.h>
- #include <linux/platform_device.h>
- #include <linux/rtc.h>
-@@ -55,12 +56,23 @@ struct rtc7301_priv {
- 	u8 bank;
- };
- 
--static const struct regmap_config rtc7301_regmap_config = {
-+/*
-+ * When the device is memory-mapped, some platforms pack the registers into
-+ * 32-bit access using the lower 8 bits at each 4-byte stride, while others
-+ * expose them as simply consecutive bytes.
-+ */
-+static const struct regmap_config rtc7301_regmap_32_config = {
- 	.reg_bits = 32,
- 	.val_bits = 8,
- 	.reg_stride = 4,
- };
- 
-+static const struct regmap_config rtc7301_regmap_8_config = {
-+	.reg_bits = 8,
-+	.val_bits = 8,
-+	.reg_stride = 1,
-+};
-+
- static u8 rtc7301_read(struct rtc7301_priv *priv, unsigned int reg)
- {
- 	int reg_stride = regmap_get_reg_stride(priv->regmap);
-@@ -356,7 +368,9 @@ static int __init rtc7301_rtc_probe(stru
- 	void __iomem *regs;
- 	struct rtc7301_priv *priv;
- 	struct rtc_device *rtc;
-+	static const struct regmap_config *mapconf;
- 	int ret;
-+	u32 val;
- 
- 	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
- 	if (!priv)
-@@ -366,8 +380,25 @@ static int __init rtc7301_rtc_probe(stru
- 	if (IS_ERR(regs))
- 		return PTR_ERR(regs);
- 
-+	ret = device_property_read_u32(&dev->dev, "reg-io-width", &val);
-+	if (ret)
-+		/* Default to 32bit accesses */
-+		val = 4;
-+
-+	switch (val) {
-+	case 1:
-+		mapconf = &rtc7301_regmap_8_config;
-+		break;
-+	case 4:
-+		mapconf = &rtc7301_regmap_32_config;
-+		break;
-+	default:
-+		dev_err(&dev->dev, "invalid reg-io-width %d\n", val);
-+		return -EINVAL;
-+	}
-+
- 	priv->regmap = devm_regmap_init_mmio(&dev->dev, regs,
--					     &rtc7301_regmap_config);
-+					     mapconf);
- 	if (IS_ERR(priv->regmap))
- 		return PTR_ERR(priv->regmap);
- 
diff --git a/target/linux/generic/backport-6.1/832-v6.7-net-phy-amd-Support-the-Altima-AMI101L.patch b/target/linux/generic/backport-6.1/832-v6.7-net-phy-amd-Support-the-Altima-AMI101L.patch
deleted file mode 100644
index e8e73c1e5f04..000000000000
--- a/target/linux/generic/backport-6.1/832-v6.7-net-phy-amd-Support-the-Altima-AMI101L.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 49e5663b505070424e18099841943f34342aa405 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sun, 24 Sep 2023 01:09:01 +0200
-Subject: [PATCH] net: phy: amd: Support the Altima AMI101L
-
-The Altima AC101L is obviously compatible with the AMD PHY,
-as seen by reading the datasheet.
-
-Datasheet: https://docs.broadcom.com/doc/AC101L-DS05-405-RDS.pdf
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/net/phy/Kconfig |  4 ++--
- drivers/net/phy/amd.c   | 33 +++++++++++++++++++++++----------
- 2 files changed, 25 insertions(+), 12 deletions(-)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -77,9 +77,9 @@ config AIR_EN8811H_PHY
- 	  Currently supports the Airoha EN8811H PHY.
- 
- config AMD_PHY
--	tristate "AMD PHYs"
-+	tristate "AMD and Altima PHYs"
- 	help
--	  Currently supports the am79c874
-+	  Currently supports the AMD am79c874 and Altima AC101L.
- 
- config MESON_GXL_PHY
- 	tristate "Amlogic Meson GXL Internal PHY"
---- a/drivers/net/phy/amd.c
-+++ b/drivers/net/phy/amd.c
-@@ -13,6 +13,7 @@
- #include <linux/mii.h>
- #include <linux/phy.h>
- 
-+#define PHY_ID_AC101L		0x00225520
- #define PHY_ID_AM79C874		0x0022561b
- 
- #define MII_AM79C_IR		17	/* Interrupt Status/Control Register */
-@@ -87,19 +88,31 @@ static irqreturn_t am79c_handle_interrup
- 	return IRQ_HANDLED;
- }
- 
--static struct phy_driver am79c_driver[] = { {
--	.phy_id		= PHY_ID_AM79C874,
--	.name		= "AM79C874",
--	.phy_id_mask	= 0xfffffff0,
--	/* PHY_BASIC_FEATURES */
--	.config_init	= am79c_config_init,
--	.config_intr	= am79c_config_intr,
--	.handle_interrupt = am79c_handle_interrupt,
--} };
-+static struct phy_driver am79c_drivers[] = {
-+	{
-+		.phy_id		= PHY_ID_AM79C874,
-+		.name		= "AM79C874",
-+		.phy_id_mask	= 0xfffffff0,
-+		/* PHY_BASIC_FEATURES */
-+		.config_init	= am79c_config_init,
-+		.config_intr	= am79c_config_intr,
-+		.handle_interrupt = am79c_handle_interrupt,
-+	},
-+	{
-+		.phy_id		= PHY_ID_AC101L,
-+		.name		= "AC101L",
-+		.phy_id_mask	= 0xfffffff0,
-+		/* PHY_BASIC_FEATURES */
-+		.config_init	= am79c_config_init,
-+		.config_intr	= am79c_config_intr,
-+		.handle_interrupt = am79c_handle_interrupt,
-+	},
-+};
- 
--module_phy_driver(am79c_driver);
-+module_phy_driver(am79c_drivers);
- 
- static struct mdio_device_id __maybe_unused amd_tbl[] = {
-+	{ PHY_ID_AC101L, 0xfffffff0 },
- 	{ PHY_ID_AM79C874, 0xfffffff0 },
- 	{ }
- };
diff --git a/target/linux/generic/backport-6.1/833-v6.8-leds-core-Add-more-colors-from-DT-bindings-to-led_co.patch.patch b/target/linux/generic/backport-6.1/833-v6.8-leds-core-Add-more-colors-from-DT-bindings-to-led_co.patch.patch
deleted file mode 100644
index b71df6fa5726..000000000000
--- a/target/linux/generic/backport-6.1/833-v6.8-leds-core-Add-more-colors-from-DT-bindings-to-led_co.patch.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From a067943129b4ec6b835e02cfd5fbef01093c1471 Mon Sep 17 00:00:00 2001
-From: Ondrej Jirman <megi@xff.cz>
-Date: Sun, 8 Oct 2023 16:40:13 +0200
-Subject: [PATCH] leds: core: Add more colors from DT bindings to led_colors
-
-The colors are already part of DT bindings. Make sure the kernel is
-able to convert them to strings.
-
-Signed-off-by: Ondrej Jirman <megi@xff.cz>
-Link: https://lore.kernel.org/r/20231008144014.1180334-1-megi@xff.cz
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/leds/led-core.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/leds/led-core.c
-+++ b/drivers/leds/led-core.c
-@@ -36,6 +36,11 @@ const char * const led_colors[LED_COLOR_
- 	[LED_COLOR_ID_IR] = "ir",
- 	[LED_COLOR_ID_MULTI] = "multicolor",
- 	[LED_COLOR_ID_RGB] = "rgb",
-+	[LED_COLOR_ID_PURPLE] = "purple",
-+	[LED_COLOR_ID_ORANGE] = "orange",
-+	[LED_COLOR_ID_PINK] = "pink",
-+	[LED_COLOR_ID_CYAN] = "cyan",
-+	[LED_COLOR_ID_LIME] = "lime",
- };
- EXPORT_SYMBOL_GPL(led_colors);
- 
diff --git a/target/linux/generic/backport-6.1/834-v6.8-leds-trigger-netdev-Extend-speeds-up-to-10G.patch b/target/linux/generic/backport-6.1/834-v6.8-leds-trigger-netdev-Extend-speeds-up-to-10G.patch
deleted file mode 100644
index 9d5a928f5f7c..000000000000
--- a/target/linux/generic/backport-6.1/834-v6.8-leds-trigger-netdev-Extend-speeds-up-to-10G.patch
+++ /dev/null
@@ -1,111 +0,0 @@
-From bc8e1da69a68d9871773b657d18400a7941cbdef Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 28 Nov 2023 04:00:10 +0000
-Subject: [PATCH] leds: trigger: netdev: Extend speeds up to 10G
-
-Add 2.5G, 5G and 10G as available speeds to the netdev LED trigger.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/99e7d3304c6bba7f4863a4a80764a869855f2085.1701143925.git.daniel@makrotopia.org
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 32 ++++++++++++++++++++++++++-
- include/linux/leds.h                  |  3 +++
- 2 files changed, 34 insertions(+), 1 deletion(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -99,6 +99,18 @@ static void set_baseline_state(struct le
- 		    trigger_data->link_speed == SPEED_1000)
- 			blink_on = true;
- 
-+		if (test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) &&
-+		    trigger_data->link_speed == SPEED_2500)
-+			blink_on = true;
-+
-+		if (test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) &&
-+		    trigger_data->link_speed == SPEED_5000)
-+			blink_on = true;
-+
-+		if (test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) &&
-+		    trigger_data->link_speed == SPEED_10000)
-+			blink_on = true;
-+
- 		if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
- 		    trigger_data->duplex == DUPLEX_HALF)
- 			blink_on = true;
-@@ -286,6 +298,9 @@ static ssize_t netdev_led_attr_show(stru
- 	case TRIGGER_NETDEV_LINK_10:
- 	case TRIGGER_NETDEV_LINK_100:
- 	case TRIGGER_NETDEV_LINK_1000:
-+	case TRIGGER_NETDEV_LINK_2500:
-+	case TRIGGER_NETDEV_LINK_5000:
-+	case TRIGGER_NETDEV_LINK_10000:
- 	case TRIGGER_NETDEV_HALF_DUPLEX:
- 	case TRIGGER_NETDEV_FULL_DUPLEX:
- 	case TRIGGER_NETDEV_TX:
-@@ -316,6 +331,9 @@ static ssize_t netdev_led_attr_store(str
- 	case TRIGGER_NETDEV_LINK_10:
- 	case TRIGGER_NETDEV_LINK_100:
- 	case TRIGGER_NETDEV_LINK_1000:
-+	case TRIGGER_NETDEV_LINK_2500:
-+	case TRIGGER_NETDEV_LINK_5000:
-+	case TRIGGER_NETDEV_LINK_10000:
- 	case TRIGGER_NETDEV_HALF_DUPLEX:
- 	case TRIGGER_NETDEV_FULL_DUPLEX:
- 	case TRIGGER_NETDEV_TX:
-@@ -334,7 +352,10 @@ static ssize_t netdev_led_attr_store(str
- 	if (test_bit(TRIGGER_NETDEV_LINK, &mode) &&
- 	    (test_bit(TRIGGER_NETDEV_LINK_10, &mode) ||
- 	     test_bit(TRIGGER_NETDEV_LINK_100, &mode) ||
--	     test_bit(TRIGGER_NETDEV_LINK_1000, &mode)))
-+	     test_bit(TRIGGER_NETDEV_LINK_1000, &mode) ||
-+	     test_bit(TRIGGER_NETDEV_LINK_2500, &mode) ||
-+	     test_bit(TRIGGER_NETDEV_LINK_5000, &mode) ||
-+	     test_bit(TRIGGER_NETDEV_LINK_10000, &mode)))
- 		return -EINVAL;
- 
- 	cancel_delayed_work_sync(&trigger_data->work);
-@@ -364,6 +385,9 @@ DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETD
- DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
- DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
- DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
-+DEFINE_NETDEV_TRIGGER(link_2500, TRIGGER_NETDEV_LINK_2500);
-+DEFINE_NETDEV_TRIGGER(link_5000, TRIGGER_NETDEV_LINK_5000);
-+DEFINE_NETDEV_TRIGGER(link_10000, TRIGGER_NETDEV_LINK_10000);
- DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
- DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
- DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
-@@ -422,6 +446,9 @@ static struct attribute *netdev_trig_att
- 	&dev_attr_link_10.attr,
- 	&dev_attr_link_100.attr,
- 	&dev_attr_link_1000.attr,
-+	&dev_attr_link_2500.attr,
-+	&dev_attr_link_5000.attr,
-+	&dev_attr_link_10000.attr,
- 	&dev_attr_full_duplex.attr,
- 	&dev_attr_half_duplex.attr,
- 	&dev_attr_rx.attr,
-@@ -519,6 +546,9 @@ static void netdev_trig_work(struct work
- 			 test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
- 			 test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
- 			 test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
-+			 test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) ||
-+			 test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) ||
-+			 test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) ||
- 			 test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
- 			 test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
- 		interval = jiffies_to_msecs(
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -531,6 +531,9 @@ enum led_trigger_netdev_modes {
- 	TRIGGER_NETDEV_LINK_10,
- 	TRIGGER_NETDEV_LINK_100,
- 	TRIGGER_NETDEV_LINK_1000,
-+	TRIGGER_NETDEV_LINK_2500,
-+	TRIGGER_NETDEV_LINK_5000,
-+	TRIGGER_NETDEV_LINK_10000,
- 	TRIGGER_NETDEV_HALF_DUPLEX,
- 	TRIGGER_NETDEV_FULL_DUPLEX,
- 	TRIGGER_NETDEV_TX,
diff --git a/target/linux/generic/backport-6.1/835-v6.9-net-phy-add-support-for-PHY-LEDs-polarity-modes.patch b/target/linux/generic/backport-6.1/835-v6.9-net-phy-add-support-for-PHY-LEDs-polarity-modes.patch
deleted file mode 100644
index 0182e6d1a203..000000000000
--- a/target/linux/generic/backport-6.1/835-v6.9-net-phy-add-support-for-PHY-LEDs-polarity-modes.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 7ae215ee7bb855f13c80565470fc7f67db4ba82f Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 25 Jan 2024 21:36:59 +0100
-Subject: [PATCH 3/5] net: phy: add support for PHY LEDs polarity modes
-
-Add support for PHY LEDs polarity modes. Some PHY require LED to be set
-to active low to be turned ON. Adds support for this by declaring
-active-low property in DT.
-
-PHY driver needs to declare .led_polarity_set() to configure LED
-polarity modes. Function will pass the index with the LED index and a
-bitmap with all the required modes to set.
-
-Current supported modes are:
-- active-low with the flag PHY_LED_ACTIVE_LOW. LED is set to active-low
-  to turn it ON.
-- inactive-high-impedance with the flag PHY_LED_INACTIVE_HIGH_IMPEDANCE.
-  LED is set to high impedance to turn it OFF.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240125203702.4552-4-ansuelsmth@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phy_device.c | 16 ++++++++++++++++
- include/linux/phy.h          | 22 ++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -3138,6 +3138,7 @@ static int of_phy_led(struct phy_device
- 	struct device *dev = &phydev->mdio.dev;
- 	struct led_init_data init_data = {};
- 	struct led_classdev *cdev;
-+	unsigned long modes = 0;
- 	struct phy_led *phyled;
- 	u32 index;
- 	int err;
-@@ -3155,6 +3156,21 @@ static int of_phy_led(struct phy_device
- 	if (index > U8_MAX)
- 		return -EINVAL;
- 
-+	if (of_property_read_bool(led, "active-low"))
-+		set_bit(PHY_LED_ACTIVE_LOW, &modes);
-+	if (of_property_read_bool(led, "inactive-high-impedance"))
-+		set_bit(PHY_LED_INACTIVE_HIGH_IMPEDANCE, &modes);
-+
-+	if (modes) {
-+		/* Return error if asked to set polarity modes but not supported */
-+		if (!phydev->drv->led_polarity_set)
-+			return -EINVAL;
-+
-+		err = phydev->drv->led_polarity_set(phydev, index, modes);
-+		if (err)
-+			return err;
-+	}
-+
- 	phyled->index = index;
- 	if (phydev->drv->led_brightness_set)
- 		cdev->brightness_set_blocking = phy_led_set_brightness;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -791,6 +791,15 @@ struct phy_led {
- 
- #define to_phy_led(d) container_of(d, struct phy_led, led_cdev)
- 
-+/* Modes for PHY LED configuration */
-+enum phy_led_modes {
-+	PHY_LED_ACTIVE_LOW = 0,
-+	PHY_LED_INACTIVE_HIGH_IMPEDANCE = 1,
-+
-+	/* keep it last */
-+	__PHY_LED_MODES_NUM,
-+};
-+
- /**
-  * struct phy_driver - Driver structure for a particular PHY type
-  *
-@@ -1059,6 +1068,19 @@ struct phy_driver {
- 	int (*led_hw_control_get)(struct phy_device *dev, u8 index,
- 				  unsigned long *rules);
- 
-+	/**
-+	 * @led_polarity_set: Set the LED polarity modes
-+	 * @dev: PHY device which has the LED
-+	 * @index: Which LED of the PHY device
-+	 * @modes: bitmap of LED polarity modes
-+	 *
-+	 * Configure LED with all the required polarity modes in @modes
-+	 * to make it correctly turn ON or OFF.
-+	 *
-+	 * Returns 0, or an error code.
-+	 */
-+	int (*led_polarity_set)(struct phy_device *dev, int index,
-+				unsigned long modes);
- };
- #define to_phy_driver(d) container_of(to_mdio_common_driver(d),		\
- 				      struct phy_driver, mdiodrv)
diff --git a/target/linux/generic/backport-6.1/836-v6.7-leds-trigger-netdev-fix-RTNL-handling-to-prevent-pot.patch b/target/linux/generic/backport-6.1/836-v6.7-leds-trigger-netdev-fix-RTNL-handling-to-prevent-pot.patch
deleted file mode 100644
index cbb917203232..000000000000
--- a/target/linux/generic/backport-6.1/836-v6.7-leds-trigger-netdev-fix-RTNL-handling-to-prevent-pot.patch
+++ /dev/null
@@ -1,170 +0,0 @@
-From fe2b1226656afae56702d1d84c6900f6b67df297 Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Fri, 1 Dec 2023 11:23:22 +0100
-Subject: [PATCH] leds: trigger: netdev: fix RTNL handling to prevent potential
- deadlock
-
-When working on LED support for r8169 I got the following lockdep
-warning. Easiest way to prevent this scenario seems to be to take
-the RTNL lock before the trigger_data lock in set_device_name().
-
-======================================================
-WARNING: possible circular locking dependency detected
-6.7.0-rc2-next-20231124+ #2 Not tainted
-------------------------------------------------------
-bash/383 is trying to acquire lock:
-ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
-
-but task is already holding lock:
-ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20
-
-which lock already depends on the new lock.
-
-the existing dependency chain (in reverse order) is:
-
--> #1 (rtnl_mutex){+.+.}-{3:3}:
-       __mutex_lock+0x9b/0xb50
-       mutex_lock_nested+0x16/0x20
-       rtnl_lock+0x12/0x20
-       set_device_name+0xa9/0x120 [ledtrig_netdev]
-       netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev]
-       led_trigger_set+0x172/0x2c0
-       led_trigger_write+0xf1/0x140
-       sysfs_kf_bin_write+0x5d/0x80
-       kernfs_fop_write_iter+0x15d/0x210
-       vfs_write+0x1f0/0x510
-       ksys_write+0x6c/0xf0
-       __x64_sys_write+0x14/0x20
-       do_syscall_64+0x3f/0xf0
-       entry_SYSCALL_64_after_hwframe+0x6c/0x74
-
--> #0 (&trigger_data->lock){+.+.}-{3:3}:
-       __lock_acquire+0x1459/0x25a0
-       lock_acquire+0xc8/0x2d0
-       __mutex_lock+0x9b/0xb50
-       mutex_lock_nested+0x16/0x20
-       netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
-       call_netdevice_register_net_notifiers+0x5a/0x100
-       register_netdevice_notifier+0x85/0x120
-       netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
-       led_trigger_set+0x172/0x2c0
-       led_trigger_write+0xf1/0x140
-       sysfs_kf_bin_write+0x5d/0x80
-       kernfs_fop_write_iter+0x15d/0x210
-       vfs_write+0x1f0/0x510
-       ksys_write+0x6c/0xf0
-       __x64_sys_write+0x14/0x20
-       do_syscall_64+0x3f/0xf0
-       entry_SYSCALL_64_after_hwframe+0x6c/0x74
-
-other info that might help us debug this:
-
- Possible unsafe locking scenario:
-
-       CPU0                    CPU1
-       ----                    ----
-  lock(rtnl_mutex);
-                               lock(&trigger_data->lock);
-                               lock(rtnl_mutex);
-  lock(&trigger_data->lock);
-
- *** DEADLOCK ***
-
-8 locks held by bash/383:
- #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0
- #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210
- #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210
- #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140
- #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140
- #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140
- #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120
- #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20
-
-stack backtrace:
-CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2
-Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023
-Call Trace:
- <TASK>
- dump_stack_lvl+0x5c/0xd0
- dump_stack+0x10/0x20
- print_circular_bug+0x2dd/0x410
- check_noncircular+0x131/0x150
- __lock_acquire+0x1459/0x25a0
- lock_acquire+0xc8/0x2d0
- ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
- __mutex_lock+0x9b/0xb50
- ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
- ? __this_cpu_preempt_check+0x13/0x20
- ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
- ? __cancel_work_timer+0x11c/0x1b0
- ? __mutex_lock+0x123/0xb50
- mutex_lock_nested+0x16/0x20
- ? mutex_lock_nested+0x16/0x20
- netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
- call_netdevice_register_net_notifiers+0x5a/0x100
- register_netdevice_notifier+0x85/0x120
- netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
- led_trigger_set+0x172/0x2c0
- ? preempt_count_add+0x49/0xc0
- led_trigger_write+0xf1/0x140
- sysfs_kf_bin_write+0x5d/0x80
- kernfs_fop_write_iter+0x15d/0x210
- vfs_write+0x1f0/0x510
- ksys_write+0x6c/0xf0
- __x64_sys_write+0x14/0x20
- do_syscall_64+0x3f/0xf0
- entry_SYSCALL_64_after_hwframe+0x6c/0x74
-RIP: 0033:0x7f269055d034
-Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
-RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
-RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034
-RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001
-RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001
-R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007
-R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000
- </TASK>
-
-Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode")
-Cc: stable@vger.kernel.org
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Acked-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 11 +++++++----
- 1 file changed, 7 insertions(+), 4 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -235,6 +235,11 @@ static int set_device_name(struct led_ne
- {
- 	cancel_delayed_work_sync(&trigger_data->work);
- 
-+	/*
-+	 * Take RTNL lock before trigger_data lock to prevent potential
-+	 * deadlock with netdev notifier registration.
-+	 */
-+	rtnl_lock();
- 	mutex_lock(&trigger_data->lock);
- 
- 	if (trigger_data->net_dev) {
-@@ -254,16 +259,14 @@ static int set_device_name(struct led_ne
- 	trigger_data->carrier_link_up = false;
- 	trigger_data->link_speed = SPEED_UNKNOWN;
- 	trigger_data->duplex = DUPLEX_UNKNOWN;
--	if (trigger_data->net_dev != NULL) {
--		rtnl_lock();
-+	if (trigger_data->net_dev)
- 		get_device_state(trigger_data);
--		rtnl_unlock();
--	}
- 
- 	trigger_data->last_activity = 0;
- 
- 	set_baseline_state(trigger_data);
- 	mutex_unlock(&trigger_data->lock);
-+	rtnl_unlock();
- 
- 	return 0;
- }
diff --git a/target/linux/generic/backport-6.1/837-v6.4-net-phy-hide-the-PHYLIB_LEDS-knob.patch b/target/linux/generic/backport-6.1/837-v6.4-net-phy-hide-the-PHYLIB_LEDS-knob.patch
deleted file mode 100644
index 51b4bbbfcb14..000000000000
--- a/target/linux/generic/backport-6.1/837-v6.4-net-phy-hide-the-PHYLIB_LEDS-knob.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 9b78d919632b7149d311aaad5a977e4b48b10321 Mon Sep 17 00:00:00 2001
-From: Paolo Abeni <pabeni@redhat.com>
-Date: Wed, 26 Apr 2023 10:15:31 +0200
-Subject: [PATCH] net: phy: hide the PHYLIB_LEDS knob
-
-commit 4bb7aac70b5d ("net: phy: fix circular LEDS_CLASS dependencies")
-solved a build failure, but introduces a new config knob with a default
-'y' value: PHYLIB_LEDS.
-
-The latter is against the current new config policy. The exception
-was raised to allow the user to catch bad configurations without led
-support.
-
-Anyway the current definition of PHYLIB_LEDS does not fit the above
-goal: if LEDS_CLASS is disabled, the new config will be available
-only with PHYLIB disabled, too.
-
-Hide the mentioned config, to preserve the randconfig testing done so
-far, while respecting the mentioned policy.
-
-Suggested-by: Andrew Lunn <andrew@lunn.ch>
-Suggested-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-Link: https://lore.kernel.org/r/d82489be8ed911c383c3447e9abf469995ccf39a.1682496488.git.pabeni@redhat.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/phy/Kconfig | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -45,10 +45,8 @@ config LED_TRIGGER_PHY
- 		for any speed known to the PHY.
- 
- config PHYLIB_LEDS
--	bool "Support probing LEDs from device tree"
-+	def_bool OF
- 	depends on LEDS_CLASS=y || LEDS_CLASS=PHYLIB
--	depends on OF
--	default y
- 	help
- 	  When LED class support is enabled, phylib can automatically
- 	  probe LED setting from device tree.
diff --git a/target/linux/generic/backport-6.1/838-v6.9-leds-trigger-netdev-Fix-kernel-panic-on-interface-re.patch b/target/linux/generic/backport-6.1/838-v6.9-leds-trigger-netdev-Fix-kernel-panic-on-interface-re.patch
deleted file mode 100644
index 8d391678ffb7..000000000000
--- a/target/linux/generic/backport-6.1/838-v6.9-leds-trigger-netdev-Fix-kernel-panic-on-interface-re.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 12ce20e02e532f101b725d71c52a36c5cc8ad1e6 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Sun, 4 Feb 2024 00:54:01 +0100
-Subject: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename
- trig notify
-
-Commit d5e01266e7f5 ("leds: trigger: netdev: add additional specific link
-speed mode") in the various changes, reworked the way to set the LINKUP
-mode in commit cee4bd16c319 ("leds: trigger: netdev: Recheck
-NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function.
-
-This changed the logic where, in the previous implementation the dev
-from the trigger event was used to check if the carrier was ok, but in
-the new implementation with the generic function, the dev in
-trigger_data is used instead.
-
-This is problematic and cause a possible kernel panic due to the fact
-that the dev in the trigger_data still reference the old one as the
-new one (passed from the trigger event) still has to be hold and saved
-in the trigger_data struct (done in the NETDEV_REGISTER case).
-
-On calling of get_device_state(), an invalid net_dev is used and this
-cause a kernel panic.
-
-To handle this correctly, move the call to get_device_state() after the
-new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER
-case) and correctly parse the new dev.
-
-Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode")
-Cc: stable@vger.kernel.org
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/20240203235413.1146-1-ansuelsmth@gmail.com
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/leds/trigger/ledtrig-netdev.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/leds/trigger/ledtrig-netdev.c
-+++ b/drivers/leds/trigger/ledtrig-netdev.c
-@@ -489,12 +489,12 @@ static int netdev_trig_notify(struct not
- 	trigger_data->duplex = DUPLEX_UNKNOWN;
- 	switch (evt) {
- 	case NETDEV_CHANGENAME:
--		get_device_state(trigger_data);
--		fallthrough;
- 	case NETDEV_REGISTER:
- 		dev_put(trigger_data->net_dev);
- 		dev_hold(dev);
- 		trigger_data->net_dev = dev;
-+		if (evt == NETDEV_CHANGENAME)
-+			get_device_state(trigger_data);
- 		break;
- 	case NETDEV_UNREGISTER:
- 		dev_put(trigger_data->net_dev);
diff --git a/target/linux/generic/backport-6.1/839-v6.9-net-phy-aquantia-clear-PMD-Global-Transmit-Disable-b.patch b/target/linux/generic/backport-6.1/839-v6.9-net-phy-aquantia-clear-PMD-Global-Transmit-Disable-b.patch
deleted file mode 100644
index 802cf8a128cc..000000000000
--- a/target/linux/generic/backport-6.1/839-v6.9-net-phy-aquantia-clear-PMD-Global-Transmit-Disable-b.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From cffac22c9215f1883d3848c788f9b03656dced27 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sun, 11 Feb 2024 18:39:19 +0100
-Subject: [PATCH] net: phy: aquantia: clear PMD Global Transmit Disable bit
- during init
-
-PMD Global Transmit Disable bit should be cleared for normal operation.
-This should be HW default, however I found that on Asus RT-AX89X that uses
-AQR113C PHY and firmware 5.4 this bit is set by default.
-
-With this bit set the AQR cannot achieve a link with its link-partner and
-it took me multiple hours of digging through the vendor GPL source to find
-this out, so lets always clear this bit during .config_init() to avoid a
-situation like this in the future.
-
-aqr107_wait_processor_intensive_op() is moved up because datasheet notes
-that any changes to this bit are processor intensive.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/net/phy/aquantia/aquantia_main.c | 57 ++++++++++++++----------
- 1 file changed, 33 insertions(+), 24 deletions(-)
-
---- a/drivers/net/phy/aquantia/aquantia_main.c
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -507,6 +507,30 @@ static void aqr107_chip_info(struct phy_
- 		   fw_major, fw_minor, build_id, prov_id);
- }
- 
-+static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
-+{
-+	int val, err;
-+
-+	/* The datasheet notes to wait at least 1ms after issuing a
-+	 * processor intensive operation before checking.
-+	 * We cannot use the 'sleep_before_read' parameter of read_poll_timeout
-+	 * because that just determines the maximum time slept, not the minimum.
-+	 */
-+	usleep_range(1000, 5000);
-+
-+	err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
-+					VEND1_GLOBAL_GEN_STAT2, val,
-+					!(val & VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG),
-+					AQR107_OP_IN_PROG_SLEEP,
-+					AQR107_OP_IN_PROG_TIMEOUT, false);
-+	if (err) {
-+		phydev_err(phydev, "timeout: processor-intensive MDIO operation\n");
-+		return err;
-+	}
-+
-+	return 0;
-+}
-+
- static int aqr107_config_init(struct phy_device *phydev)
- {
- 	int ret;
-@@ -530,6 +554,15 @@ static int aqr107_config_init(struct phy
- 	if (!ret)
- 		aqr107_chip_info(phydev);
- 
-+	ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_TXDIS,
-+				 MDIO_PMD_TXDIS_GLOBAL);
-+	if (ret)
-+		return ret;
-+
-+	ret = aqr107_wait_processor_intensive_op(phydev);
-+	if (ret)
-+		return ret;
-+
- 	return aqr107_set_downshift(phydev, MDIO_AN_VEND_PROV_DOWNSHIFT_DFLT);
- }
- 
-@@ -600,30 +633,6 @@ static void aqr107_link_change_notify(st
- 		phydev_info(phydev, "Aquantia 1000Base-T2 mode active\n");
- }
- 
--static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
--{
--	int val, err;
--
--	/* The datasheet notes to wait at least 1ms after issuing a
--	 * processor intensive operation before checking.
--	 * We cannot use the 'sleep_before_read' parameter of read_poll_timeout
--	 * because that just determines the maximum time slept, not the minimum.
--	 */
--	usleep_range(1000, 5000);
--
--	err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
--					VEND1_GLOBAL_GEN_STAT2, val,
--					!(val & VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG),
--					AQR107_OP_IN_PROG_SLEEP,
--					AQR107_OP_IN_PROG_TIMEOUT, false);
--	if (err) {
--		phydev_err(phydev, "timeout: processor-intensive MDIO operation\n");
--		return err;
--	}
--
--	return 0;
--}
--
- static int aqr107_get_rate_matching(struct phy_device *phydev,
- 				    phy_interface_t iface)
- {
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0001-nvmem-add-missing-MODULE_DESCRIPTION-macros.patch b/target/linux/generic/backport-6.1/840-v6.11-0001-nvmem-add-missing-MODULE_DESCRIPTION-macros.patch
deleted file mode 100644
index a8ce832408f8..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0001-nvmem-add-missing-MODULE_DESCRIPTION-macros.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From c553bad4c5fc5ae44bd2fcaa73e1d6bedfb1c35c Mon Sep 17 00:00:00 2001
-From: Jeff Johnson <quic_jjohnson@quicinc.com>
-Date: Fri, 5 Jul 2024 08:48:38 +0100
-Subject: [PATCH] nvmem: add missing MODULE_DESCRIPTION() macros
-
-make allmodconfig && make W=1 C=1 reports:
-WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem-apple-efuses.o
-WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_brcm_nvram.o
-WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_u-boot-env.o
-
-Add the missing invocations of the MODULE_DESCRIPTION() macro.
-
-Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/apple-efuses.c | 1 +
- drivers/nvmem/brcm_nvram.c   | 1 +
- drivers/nvmem/u-boot-env.c   | 1 +
- 3 files changed, 3 insertions(+)
-
---- a/drivers/nvmem/apple-efuses.c
-+++ b/drivers/nvmem/apple-efuses.c
-@@ -78,4 +78,5 @@ static struct platform_driver apple_efus
- module_platform_driver(apple_efuses_driver);
- 
- MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
-+MODULE_DESCRIPTION("Apple SoC eFuse driver");
- MODULE_LICENSE("GPL");
---- a/drivers/nvmem/brcm_nvram.c
-+++ b/drivers/nvmem/brcm_nvram.c
-@@ -253,5 +253,6 @@ static int __init brcm_nvram_init(void)
- subsys_initcall_sync(brcm_nvram_init);
- 
- MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_DESCRIPTION("Broadcom I/O-mapped NVRAM support driver");
- MODULE_LICENSE("GPL");
- MODULE_DEVICE_TABLE(of, brcm_nvram_of_match_table);
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -249,5 +249,6 @@ static struct platform_driver u_boot_env
- module_platform_driver(u_boot_env_driver);
- 
- MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_DESCRIPTION("U-Boot environment variables support module");
- MODULE_LICENSE("GPL");
- MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0002-nvmem-meson-efuse-Replacing-the-use-of-of_node_put-t.patch b/target/linux/generic/backport-6.1/840-v6.11-0002-nvmem-meson-efuse-Replacing-the-use-of-of_node_put-t.patch
deleted file mode 100644
index 05c82dbf6f56..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0002-nvmem-meson-efuse-Replacing-the-use-of-of_node_put-t.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 5fecb932607d83d37a703c731268e9d9051457f5 Mon Sep 17 00:00:00 2001
-From: MarileneGarcia <marilene.agarcia@gmail.com>
-Date: Fri, 5 Jul 2024 08:48:40 +0100
-Subject: [PATCH] nvmem: meson-efuse: Replacing the use of of_node_put to
- __free
-
-Use __free for device_node values, and thus drop calls to
-of_node_put.
-
-The goal is to reduce memory management issues by using this
-scope-based of_node_put() cleanup to simplify function exit
-handling. When using __free a resource is allocated within a
-block, it is automatically freed at the end of the block.
-
-Suggested-by: Julia Lawall <julia.lawall@inria.fr>
-Signed-off-by: MarileneGarcia <marilene.agarcia@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-4-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/meson-efuse.c | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/meson-efuse.c
-+++ b/drivers/nvmem/meson-efuse.c
-@@ -48,20 +48,19 @@ static int meson_efuse_probe(struct plat
- {
- 	struct device *dev = &pdev->dev;
- 	struct meson_sm_firmware *fw;
--	struct device_node *sm_np;
- 	struct nvmem_device *nvmem;
- 	struct nvmem_config *econfig;
- 	struct clk *clk;
- 	unsigned int size;
-+	struct device_node *sm_np __free(device_node) =
-+			of_parse_phandle(pdev->dev.of_node, "secure-monitor", 0);
- 
--	sm_np = of_parse_phandle(pdev->dev.of_node, "secure-monitor", 0);
- 	if (!sm_np) {
- 		dev_err(&pdev->dev, "no secure-monitor node\n");
- 		return -ENODEV;
- 	}
- 
- 	fw = meson_sm_get(sm_np);
--	of_node_put(sm_np);
- 	if (!fw)
- 		return -EPROBE_DEFER;
- 
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0003-nvmem-rockchip-otp-set-add_legacy_fixed_of_cells-con.patch b/target/linux/generic/backport-6.1/840-v6.11-0003-nvmem-rockchip-otp-set-add_legacy_fixed_of_cells-con.patch
deleted file mode 100644
index a8a30fc8103e..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0003-nvmem-rockchip-otp-set-add_legacy_fixed_of_cells-con.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 2933e79db3c00a8cdc56f6bb050a857fec1875ad Mon Sep 17 00:00:00 2001
-From: Heiko Stuebner <heiko.stuebner@cherry.de>
-Date: Fri, 5 Jul 2024 08:48:41 +0100
-Subject: [PATCH] nvmem: rockchip-otp: set add_legacy_fixed_of_cells config
- option
-
-The Rockchip OTP describes its layout via devicetree subnodes,
-so set the appropriate property.
-
-Fixes: 2cc3b37f5b6d ("nvmem: add explicit config option to read old syntax fixed OF cells")
-Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rockchip-otp.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/rockchip-otp.c
-+++ b/drivers/nvmem/rockchip-otp.c
-@@ -255,6 +255,7 @@ static int rockchip_otp_read(void *conte
- static struct nvmem_config otp_config = {
- 	.name = "rockchip-otp",
- 	.owner = THIS_MODULE,
-+	.add_legacy_fixed_of_cells = true,
- 	.read_only = true,
- 	.stride = 1,
- 	.word_size = 1,
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0004-nvmem-rockchip-otp-Set-type-to-OTP.patch b/target/linux/generic/backport-6.1/840-v6.11-0004-nvmem-rockchip-otp-Set-type-to-OTP.patch
deleted file mode 100644
index 8491eb3c9ce2..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0004-nvmem-rockchip-otp-Set-type-to-OTP.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 39f95600d8c53355b212a117e91a6ba15e0cac47 Mon Sep 17 00:00:00 2001
-From: Heiko Stuebner <heiko.stuebner@cherry.de>
-Date: Fri, 5 Jul 2024 08:48:42 +0100
-Subject: [PATCH] nvmem: rockchip-otp: Set type to OTP
-
-The Rockchip OTP is obviously an OTP memory, so document this fact.
-
-Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-6-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rockchip-otp.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/rockchip-otp.c
-+++ b/drivers/nvmem/rockchip-otp.c
-@@ -256,6 +256,7 @@ static struct nvmem_config otp_config =
- 	.name = "rockchip-otp",
- 	.owner = THIS_MODULE,
- 	.add_legacy_fixed_of_cells = true,
-+	.type = NVMEM_TYPE_OTP,
- 	.read_only = true,
- 	.stride = 1,
- 	.word_size = 1,
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0005-nvmem-rockchip-efuse-set-type-to-OTP.patch b/target/linux/generic/backport-6.1/840-v6.11-0005-nvmem-rockchip-efuse-set-type-to-OTP.patch
deleted file mode 100644
index 260b03eb035f..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0005-nvmem-rockchip-efuse-set-type-to-OTP.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From ba64a04474d2989f397982c48e405cfd785e2dd5 Mon Sep 17 00:00:00 2001
-From: Heiko Stuebner <heiko.stuebner@cherry.de>
-Date: Fri, 5 Jul 2024 08:48:43 +0100
-Subject: [PATCH] nvmem: rockchip-efuse: set type to OTP
-
-This device currently reports an "Unknown" type in sysfs.
-Since it is an eFuse hardware device, set its type to OTP.
-
-Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-7-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/rockchip-efuse.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/nvmem/rockchip-efuse.c
-+++ b/drivers/nvmem/rockchip-efuse.c
-@@ -206,6 +206,7 @@ static int rockchip_rk3399_efuse_read(vo
- static struct nvmem_config econfig = {
- 	.name = "rockchip-efuse",
- 	.add_legacy_fixed_of_cells = true,
-+	.type = NVMEM_TYPE_OTP,
- 	.stride = 1,
- 	.word_size = 1,
- 	.read_only = true,
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0006-nvmem-core-add-single-sysfs-group.patch b/target/linux/generic/backport-6.1/840-v6.11-0006-nvmem-core-add-single-sysfs-group.patch
deleted file mode 100644
index 4fb2afd2fa33..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0006-nvmem-core-add-single-sysfs-group.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 6188f233161c6a5b2d1c396a221dfafc77dc9eec Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= <linux@weissschuh.net>
-Date: Fri, 5 Jul 2024 08:48:46 +0100
-Subject: [PATCH] nvmem: core: add single sysfs group
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The sysfs core provides a function to easily register a single group.
-Use it and remove the now unnecessary nvmem_cells_groups array.
-
-Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-10-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 7 +------
- 1 file changed, 1 insertion(+), 6 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -368,11 +368,6 @@ static const struct attribute_group *nvm
- 	NULL,
- };
- 
--static const struct attribute_group *nvmem_cells_groups[] = {
--	&nvmem_cells_group,
--	NULL,
--};
--
- static struct bin_attribute bin_attr_nvmem_eeprom_compat = {
- 	.attr	= {
- 		.name	= "eeprom",
-@@ -477,7 +472,7 @@ static int nvmem_populate_sysfs_cells(st
- 
- 	nvmem_cells_group.bin_attrs = cells_attrs;
- 
--	ret = device_add_groups(&nvmem->dev, nvmem_cells_groups);
-+	ret = device_add_group(&nvmem->dev, &nvmem_cells_group);
- 	if (ret)
- 		goto unlock_mutex;
- 
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0007-nvmem-core-remove-global-nvmem_cells_group.patch b/target/linux/generic/backport-6.1/840-v6.11-0007-nvmem-core-remove-global-nvmem_cells_group.patch
deleted file mode 100644
index ef626d37a031..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0007-nvmem-core-remove-global-nvmem_cells_group.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 6839fed062b7898665983368c88269a6fb1fc10f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= <linux@weissschuh.net>
-Date: Fri, 5 Jul 2024 08:48:47 +0100
-Subject: [PATCH] nvmem: core: remove global nvmem_cells_group
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-nvmem_cells_groups is a global variable that is also mutated.
-This is complicated and error-prone.
-
-Instead use a normal stack variable.
-
-Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-11-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 26 ++++++++++----------------
- 1 file changed, 10 insertions(+), 16 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -358,11 +358,6 @@ static const struct attribute_group nvme
- 	.is_bin_visible = nvmem_bin_attr_is_visible,
- };
- 
--/* Cell attributes will be dynamically allocated */
--static struct attribute_group nvmem_cells_group = {
--	.name		= "cells",
--};
--
- static const struct attribute_group *nvmem_dev_groups[] = {
- 	&nvmem_bin_group,
- 	NULL,
-@@ -424,23 +419,24 @@ static void nvmem_sysfs_remove_compat(st
- 
- static int nvmem_populate_sysfs_cells(struct nvmem_device *nvmem)
- {
--	struct bin_attribute **cells_attrs, *attrs;
-+	struct attribute_group group = {
-+		.name	= "cells",
-+	};
- 	struct nvmem_cell_entry *entry;
-+	struct bin_attribute *attrs;
- 	unsigned int ncells = 0, i = 0;
- 	int ret = 0;
- 
- 	mutex_lock(&nvmem_mutex);
- 
--	if (list_empty(&nvmem->cells) || nvmem->sysfs_cells_populated) {
--		nvmem_cells_group.bin_attrs = NULL;
-+	if (list_empty(&nvmem->cells) || nvmem->sysfs_cells_populated)
- 		goto unlock_mutex;
--	}
- 
- 	/* Allocate an array of attributes with a sentinel */
- 	ncells = list_count_nodes(&nvmem->cells);
--	cells_attrs = devm_kcalloc(&nvmem->dev, ncells + 1,
--				   sizeof(struct bin_attribute *), GFP_KERNEL);
--	if (!cells_attrs) {
-+	group.bin_attrs = devm_kcalloc(&nvmem->dev, ncells + 1,
-+				       sizeof(struct bin_attribute *), GFP_KERNEL);
-+	if (!group.bin_attrs) {
- 		ret = -ENOMEM;
- 		goto unlock_mutex;
- 	}
-@@ -466,13 +462,11 @@ static int nvmem_populate_sysfs_cells(st
- 			goto unlock_mutex;
- 		}
- 
--		cells_attrs[i] = &attrs[i];
-+		group.bin_attrs[i] = &attrs[i];
- 		i++;
- 	}
- 
--	nvmem_cells_group.bin_attrs = cells_attrs;
--
--	ret = device_add_group(&nvmem->dev, &nvmem_cells_group);
-+	ret = device_add_group(&nvmem->dev, &group);
- 	if (ret)
- 		goto unlock_mutex;
- 
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0008-nvmem-core-drop-unnecessary-range-checks-in-sysfs-ca.patch b/target/linux/generic/backport-6.1/840-v6.11-0008-nvmem-core-drop-unnecessary-range-checks-in-sysfs-ca.patch
deleted file mode 100644
index 9b6251b919eb..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0008-nvmem-core-drop-unnecessary-range-checks-in-sysfs-ca.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 588773802c386d38f9c4e91acd47369e89d95a30 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= <linux@weissschuh.net>
-Date: Fri, 5 Jul 2024 08:48:48 +0100
-Subject: [PATCH] nvmem: core: drop unnecessary range checks in sysfs callbacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The same checks have already been done in sysfs_kf_bin_write() and
-sysfs_kf_bin_read() just before the callbacks are invoked.
-
-Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-12-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 14 --------------
- 1 file changed, 14 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -204,19 +204,12 @@ static ssize_t bin_attr_nvmem_read(struc
- 		dev = kobj_to_dev(kobj);
- 	nvmem = to_nvmem_device(dev);
- 
--	/* Stop the user from reading */
--	if (pos >= nvmem->size)
--		return 0;
--
- 	if (!IS_ALIGNED(pos, nvmem->stride))
- 		return -EINVAL;
- 
- 	if (count < nvmem->word_size)
- 		return -EINVAL;
- 
--	if (pos + count > nvmem->size)
--		count = nvmem->size - pos;
--
- 	count = round_down(count, nvmem->word_size);
- 
- 	if (!nvmem->reg_read)
-@@ -244,19 +237,12 @@ static ssize_t bin_attr_nvmem_write(stru
- 		dev = kobj_to_dev(kobj);
- 	nvmem = to_nvmem_device(dev);
- 
--	/* Stop the user from writing */
--	if (pos >= nvmem->size)
--		return -EFBIG;
--
- 	if (!IS_ALIGNED(pos, nvmem->stride))
- 		return -EINVAL;
- 
- 	if (count < nvmem->word_size)
- 		return -EINVAL;
- 
--	if (pos + count > nvmem->size)
--		count = nvmem->size - pos;
--
- 	count = round_down(count, nvmem->word_size);
- 
- 	if (!nvmem->reg_write)
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0009-nvmem-Use-sysfs_emit-for-type-attribute.patch b/target/linux/generic/backport-6.1/840-v6.11-0009-nvmem-Use-sysfs_emit-for-type-attribute.patch
deleted file mode 100644
index 3da1febaf104..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0009-nvmem-Use-sysfs_emit-for-type-attribute.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 08c367e45b6d322956878774f0b88bf5e52c6d54 Mon Sep 17 00:00:00 2001
-From: Marek Vasut <marex@denx.de>
-Date: Fri, 5 Jul 2024 08:48:51 +0100
-Subject: [PATCH] nvmem: Use sysfs_emit() for type attribute
-
-Use sysfs_emit() instead of sprintf() to follow best practice per
-Documentation/filesystems/sysfs.rst
-"
-show() should only use sysfs_emit()...
-"
-
-Signed-off-by: Marek Vasut <marex@denx.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-15-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -180,7 +180,7 @@ static ssize_t type_show(struct device *
- {
- 	struct nvmem_device *nvmem = to_nvmem_device(dev);
- 
--	return sprintf(buf, "%s\n", nvmem_type_str[nvmem->type]);
-+	return sysfs_emit(buf, "%s\n", nvmem_type_str[nvmem->type]);
- }
- 
- static DEVICE_ATTR_RO(type);
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0010-nvmem-core-Implement-force_ro-sysfs-attribute.patch b/target/linux/generic/backport-6.1/840-v6.11-0010-nvmem-core-Implement-force_ro-sysfs-attribute.patch
deleted file mode 100644
index ac7dda1bdf42..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0010-nvmem-core-Implement-force_ro-sysfs-attribute.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From 9d7eb234ac7a56b88aea8a52ed81553a730fe25c Mon Sep 17 00:00:00 2001
-From: Marek Vasut <marex@denx.de>
-Date: Fri, 5 Jul 2024 08:48:52 +0100
-Subject: [PATCH] nvmem: core: Implement force_ro sysfs attribute
-
-Implement "force_ro" sysfs attribute to allow users to set read-write
-devices as read-only and back to read-write from userspace. The choice
-of the name is based on MMC core 'force_ro' attribute.
-
-This solves a situation where an AT24 I2C EEPROM with GPIO based nWP
-signal may have to be occasionally updated. Such I2C EEPROM device is
-usually set as read-only during most of the regular system operation,
-but in case it has to be updated in a controlled manner, it could be
-unlocked using this new "force_ro" sysfs attribute and then re-locked
-again.
-
-The "read-only" DT property and config->read_only configuration is
-respected and is used to set default state of the device, read-only
-or read-write, for devices which do implement .reg_write function.
-For devices which do not implement .reg_write function, the device
-is unconditionally read-only and the "force_ro" attribute is not
-visible.
-
-Signed-off-by: Marek Vasut <marex@denx.de>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240705074852.423202-16-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- Documentation/ABI/stable/sysfs-bus-nvmem | 17 ++++++++++
- drivers/nvmem/core.c                     | 43 ++++++++++++++++++++++++
- 2 files changed, 60 insertions(+)
-
---- a/Documentation/ABI/stable/sysfs-bus-nvmem
-+++ b/Documentation/ABI/stable/sysfs-bus-nvmem
-@@ -1,3 +1,20 @@
-+What:		/sys/bus/nvmem/devices/.../force_ro
-+Date:		June 2024
-+KernelVersion:	6.11
-+Contact:	Marek Vasut <marex@denx.de>
-+Description:
-+		This read/write attribute allows users to set read-write
-+		devices as read-only and back to read-write from userspace.
-+		This can be used to unlock and relock write-protection of
-+		devices which are generally locked, except during sporadic
-+		programming operation.
-+		Read returns '0' or '1' for read-write or read-only modes
-+		respectively.
-+		Write parses one of 'YyTt1NnFf0', or [oO][NnFf] for "on"
-+		and "off", i.e. what kstrbool() supports.
-+		Note: This file is only present if CONFIG_NVMEM_SYSFS
-+		is enabled.
-+
- What:		/sys/bus/nvmem/devices/.../nvmem
- Date:		July 2015
- KernelVersion:  4.2
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -185,7 +185,30 @@ static ssize_t type_show(struct device *
- 
- static DEVICE_ATTR_RO(type);
- 
-+static ssize_t force_ro_show(struct device *dev, struct device_attribute *attr,
-+			     char *buf)
-+{
-+	struct nvmem_device *nvmem = to_nvmem_device(dev);
-+
-+	return sysfs_emit(buf, "%d\n", nvmem->read_only);
-+}
-+
-+static ssize_t force_ro_store(struct device *dev, struct device_attribute *attr,
-+			      const char *buf, size_t count)
-+{
-+	struct nvmem_device *nvmem = to_nvmem_device(dev);
-+	int ret = kstrtobool(buf, &nvmem->read_only);
-+
-+	if (ret < 0)
-+		return ret;
-+
-+	return count;
-+}
-+
-+static DEVICE_ATTR_RW(force_ro);
-+
- static struct attribute *nvmem_attrs[] = {
-+	&dev_attr_force_ro.attr,
- 	&dev_attr_type.attr,
- 	NULL,
- };
-@@ -286,6 +309,25 @@ static umode_t nvmem_bin_attr_is_visible
- 	return nvmem_bin_attr_get_umode(nvmem);
- }
- 
-+static umode_t nvmem_attr_is_visible(struct kobject *kobj,
-+				     struct attribute *attr, int i)
-+{
-+	struct device *dev = kobj_to_dev(kobj);
-+	struct nvmem_device *nvmem = to_nvmem_device(dev);
-+
-+	/*
-+	 * If the device has no .reg_write operation, do not allow
-+	 * configuration as read-write.
-+	 * If the device is set as read-only by configuration, it
-+	 * can be forced into read-write mode using the 'force_ro'
-+	 * attribute.
-+	 */
-+	if (attr == &dev_attr_force_ro.attr && !nvmem->reg_write)
-+		return 0;	/* Attribute not visible */
-+
-+	return attr->mode;
-+}
-+
- static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry,
- 					    const char *id, int index);
- 
-@@ -342,6 +384,7 @@ static const struct attribute_group nvme
- 	.bin_attrs	= nvmem_bin_attributes,
- 	.attrs		= nvmem_attrs,
- 	.is_bin_visible = nvmem_bin_attr_is_visible,
-+	.is_visible	= nvmem_attr_is_visible,
- };
- 
- static const struct attribute_group *nvmem_dev_groups[] = {
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0011-nvmem-u-boot-env-error-if-NVMEM-device-is-too-small.patch b/target/linux/generic/backport-6.1/840-v6.11-0011-nvmem-u-boot-env-error-if-NVMEM-device-is-too-small.patch
deleted file mode 100644
index 70d420f205fb..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0011-nvmem-u-boot-env-error-if-NVMEM-device-is-too-small.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 8679e8b4a1ebdb40c4429e49368d29353e07b601 Mon Sep 17 00:00:00 2001
-From: John Thomson <git@johnthomson.fastmail.com.au>
-Date: Mon, 2 Sep 2024 15:25:08 +0100
-Subject: [PATCH] nvmem: u-boot-env: error if NVMEM device is too small
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Verify data size before trying to parse it to avoid reading out of
-buffer. This could happen in case of problems at MTD level or invalid DT
-bindings.
-
-Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
-Cc: stable <stable@kernel.org>
-Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables")
-[rmilecki: simplify commit description & rebase]
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240902142510.71096-2-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/u-boot-env.c | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -176,6 +176,13 @@ static int u_boot_env_parse(struct u_boo
- 		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
- 		break;
- 	}
-+
-+	if (dev_size < data_offset) {
-+		dev_err(dev, "Device too small for u-boot-env\n");
-+		err = -EIO;
-+		goto err_kfree;
-+	}
-+
- 	crc32_addr = (__le32 *)(buf + crc32_offset);
- 	crc32 = le32_to_cpu(*crc32_addr);
- 	crc32_data_len = dev_size - crc32_data_offset;
diff --git a/target/linux/generic/backport-6.1/840-v6.11-0012-nvmem-Fix-return-type-of-devm_nvmem_device_get-in-ke.patch b/target/linux/generic/backport-6.1/840-v6.11-0012-nvmem-Fix-return-type-of-devm_nvmem_device_get-in-ke.patch
deleted file mode 100644
index 08f627884993..000000000000
--- a/target/linux/generic/backport-6.1/840-v6.11-0012-nvmem-Fix-return-type-of-devm_nvmem_device_get-in-ke.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From c69f37f6559a8948d70badd2b179db7714dedd62 Mon Sep 17 00:00:00 2001
-From: Geert Uytterhoeven <geert+renesas@glider.be>
-Date: Mon, 2 Sep 2024 15:25:09 +0100
-Subject: [PATCH] nvmem: Fix return type of devm_nvmem_device_get() in
- kerneldoc
-
-devm_nvmem_device_get() returns an nvmem device, not an nvmem cell.
-
-Fixes: e2a5402ec7c6d044 ("nvmem: Add nvmem_device based consumer apis.")
-Cc: stable <stable@kernel.org>
-Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240902142510.71096-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/core.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -1276,13 +1276,13 @@ void nvmem_device_put(struct nvmem_devic
- EXPORT_SYMBOL_GPL(nvmem_device_put);
- 
- /**
-- * devm_nvmem_device_get() - Get nvmem cell of device form a given id
-+ * devm_nvmem_device_get() - Get nvmem device of device form a given id
-  *
-  * @dev: Device that requests the nvmem device.
-  * @id: name id for the requested nvmem device.
-  *
-- * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_cell
-- * on success.  The nvmem_cell will be freed by the automatically once the
-+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device
-+ * on success.  The nvmem_device will be freed by the automatically once the
-  * device is freed.
-  */
- struct nvmem_device *devm_nvmem_device_get(struct device *dev, const char *id)
diff --git a/target/linux/generic/backport-6.1/841-v6.12-0001-nvmem-imx-ocotp-ele-support-i.MX95.patch b/target/linux/generic/backport-6.1/841-v6.12-0001-nvmem-imx-ocotp-ele-support-i.MX95.patch
deleted file mode 100644
index c19931b3fa01..000000000000
--- a/target/linux/generic/backport-6.1/841-v6.12-0001-nvmem-imx-ocotp-ele-support-i.MX95.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From c3f9b7b4e5f9de319d00784577cda42036ff243a Mon Sep 17 00:00:00 2001
-From: Peng Fan <peng.fan@nxp.com>
-Date: Mon, 2 Sep 2024 15:29:45 +0100
-Subject: [PATCH] nvmem: imx-ocotp-ele: support i.MX95
-
-i.MX95 OCOTP has same accessing method, so add an entry for i.MX95, but
-some fuse has ECC feature, so only read out the lower 16bits for ECC fuses.
-
-Signed-off-by: Peng Fan <peng.fan@nxp.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240902142952.71639-3-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/imx-ocotp-ele.c | 32 +++++++++++++++++++++++++++++---
- 1 file changed, 29 insertions(+), 3 deletions(-)
-
---- a/drivers/nvmem/imx-ocotp-ele.c
-+++ b/drivers/nvmem/imx-ocotp-ele.c
-@@ -14,8 +14,9 @@
- #include <linux/slab.h>
- 
- enum fuse_type {
--	FUSE_FSB = 1,
--	FUSE_ELE = 2,
-+	FUSE_FSB = BIT(0),
-+	FUSE_ELE = BIT(1),
-+	FUSE_ECC = BIT(2),
- 	FUSE_INVALID = -1
- };
- 
-@@ -93,7 +94,10 @@ static int imx_ocotp_reg_read(void *cont
- 			continue;
- 		}
- 
--		*buf++ = readl_relaxed(reg + (i << 2));
-+		if (type & FUSE_ECC)
-+			*buf++ = readl_relaxed(reg + (i << 2)) & GENMASK(15, 0);
-+		else
-+			*buf++ = readl_relaxed(reg + (i << 2));
- 	}
- 
- 	memcpy(val, (u8 *)p, bytes);
-@@ -155,8 +159,30 @@ static const struct ocotp_devtype_data i
- 	},
- };
- 
-+static const struct ocotp_devtype_data imx95_ocotp_data = {
-+	.reg_off = 0x8000,
-+	.reg_read = imx_ocotp_reg_read,
-+	.size = 2048,
-+	.num_entry = 12,
-+	.entry = {
-+		{ 0, 1, FUSE_FSB | FUSE_ECC },
-+		{ 7, 1, FUSE_FSB | FUSE_ECC },
-+		{ 9, 3, FUSE_FSB | FUSE_ECC },
-+		{ 12, 24, FUSE_FSB },
-+		{ 36, 2, FUSE_FSB  | FUSE_ECC },
-+		{ 38, 14, FUSE_FSB },
-+		{ 63, 1, FUSE_ELE },
-+		{ 128, 16, FUSE_ELE },
-+		{ 188, 1, FUSE_ELE },
-+		{ 317, 2, FUSE_FSB | FUSE_ECC },
-+		{ 320, 7, FUSE_FSB },
-+		{ 328, 184, FUSE_FSB }
-+	},
-+};
-+
- static const struct of_device_id imx_ele_ocotp_dt_ids[] = {
- 	{ .compatible = "fsl,imx93-ocotp", .data = &imx93_ocotp_data, },
-+	{ .compatible = "fsl,imx95-ocotp", .data = &imx95_ocotp_data, },
- 	{},
- };
- MODULE_DEVICE_TABLE(of, imx_ele_ocotp_dt_ids);
diff --git a/target/linux/generic/backport-6.1/841-v6.12-0002-nvmem-sunplus-ocotp-Use-devm_platform_ioremap_resour.patch b/target/linux/generic/backport-6.1/841-v6.12-0002-nvmem-sunplus-ocotp-Use-devm_platform_ioremap_resour.patch
deleted file mode 100644
index 13ef50b15796..000000000000
--- a/target/linux/generic/backport-6.1/841-v6.12-0002-nvmem-sunplus-ocotp-Use-devm_platform_ioremap_resour.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 98ee46391baf35987227236d0c3bb30ab6e758c8 Mon Sep 17 00:00:00 2001
-From: Zhang Zekun <zhangzekun11@huawei.com>
-Date: Mon, 2 Sep 2024 15:29:50 +0100
-Subject: [PATCH] nvmem: sunplus-ocotp: Use
- devm_platform_ioremap_resource_byname() helper function
-
-platform_get_resource_byname() and devm_ioremap_resource() can be
-replaced by devm_platform_ioremap_resource_byname(), which can
-simplify the code logic a bit, No functional change here.
-
-Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240902142952.71639-8-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/nvmem/sunplus-ocotp.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/nvmem/sunplus-ocotp.c
-+++ b/drivers/nvmem/sunplus-ocotp.c
-@@ -159,7 +159,6 @@ static int sp_ocotp_probe(struct platfor
- 	struct device *dev = &pdev->dev;
- 	struct nvmem_device *nvmem;
- 	struct sp_ocotp_priv *otp;
--	struct resource *res;
- 	int ret;
- 
- 	otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
-@@ -168,13 +167,11 @@ static int sp_ocotp_probe(struct platfor
- 
- 	otp->dev = dev;
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hb_gpio");
--	otp->base[HB_GPIO] = devm_ioremap_resource(dev, res);
-+	otp->base[HB_GPIO] = devm_platform_ioremap_resource_byname(pdev, "hb_gpio");
- 	if (IS_ERR(otp->base[HB_GPIO]))
- 		return PTR_ERR(otp->base[HB_GPIO]);
- 
--	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otprx");
--	otp->base[OTPRX] = devm_ioremap_resource(dev, res);
-+	otp->base[OTPRX] = devm_platform_ioremap_resource_byname(pdev, "otprx");
- 	if (IS_ERR(otp->base[OTPRX]))
- 		return PTR_ERR(otp->base[OTPRX]);
- 
diff --git a/target/linux/generic/backport-6.1/841-v6.12-0003-nvmem-layouts-add-U-Boot-env-layout.patch b/target/linux/generic/backport-6.1/841-v6.12-0003-nvmem-layouts-add-U-Boot-env-layout.patch
deleted file mode 100644
index e711c84c8d07..000000000000
--- a/target/linux/generic/backport-6.1/841-v6.12-0003-nvmem-layouts-add-U-Boot-env-layout.patch
+++ /dev/null
@@ -1,525 +0,0 @@
-From 5f15811286aff4664bf275a7ede64e1b8858151b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 2 Sep 2024 15:29:47 +0100
-Subject: [PATCH] nvmem: layouts: add U-Boot env layout
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-U-Boot environment variables are stored in a specific format. Actual
-data can be placed in various storage sources (MTD, UBI volume, EEPROM,
-NVRAM, etc.).
-
-Move all generic (NVMEM device independent) code from NVMEM device
-driver to an NVMEM layout driver. Then add a simple NVMEM layout code on
-top of it.
-
-This allows using NVMEM layout for parsing U-Boot env data stored in any
-kind of NVMEM device.
-
-The old NVMEM glue driver stays in place for handling bindings in the
-MTD context. To avoid code duplication it uses exported layout parsing
-function. Please note that handling MTD & NVMEM layout bindings may be
-refactored in the future.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
-Link: https://lore.kernel.org/r/20240902142952.71639-5-srinivas.kandagatla@linaro.org
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- MAINTAINERS                        |   1 +
- drivers/nvmem/Kconfig              |   3 +-
- drivers/nvmem/layouts/Kconfig      |  11 ++
- drivers/nvmem/layouts/Makefile     |   1 +
- drivers/nvmem/layouts/u-boot-env.c | 211 +++++++++++++++++++++++++++++
- drivers/nvmem/layouts/u-boot-env.h |  15 ++
- drivers/nvmem/u-boot-env.c         | 165 +---------------------
- 7 files changed, 242 insertions(+), 165 deletions(-)
- create mode 100644 drivers/nvmem/layouts/u-boot-env.c
- create mode 100644 drivers/nvmem/layouts/u-boot-env.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -21033,6 +21033,7 @@ U-BOOT ENVIRONMENT VARIABLES
- M:	Rafał Miłecki <rafal@milecki.pl>
- S:	Maintained
- F:	Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
-+F:	drivers/nvmem/layouts/u-boot-env.c
- F:	drivers/nvmem/u-boot-env.c
- 
- UACCE ACCELERATOR FRAMEWORK
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -363,8 +363,7 @@ config NVMEM_SUNXI_SID
- config NVMEM_U_BOOT_ENV
- 	tristate "U-Boot environment variables support"
- 	depends on OF && MTD
--	select CRC32
--	select GENERIC_NET_UTILS
-+	select NVMEM_LAYOUT_U_BOOT_ENV
- 	help
- 	  U-Boot stores its setup as environment variables. This driver adds
- 	  support for verifying & exporting such data. It also exposes variables
---- a/drivers/nvmem/layouts/Kconfig
-+++ b/drivers/nvmem/layouts/Kconfig
-@@ -26,6 +26,17 @@ config NVMEM_LAYOUT_ONIE_TLV
- 
- 	  If unsure, say N.
- 
-+config NVMEM_LAYOUT_U_BOOT_ENV
-+	tristate "U-Boot environment variables layout"
-+	select CRC32
-+	select GENERIC_NET_UTILS
-+	help
-+	  U-Boot stores its setup as environment variables. This driver adds
-+	  support for verifying & exporting such data. It also exposes variables
-+	  as NVMEM cells so they can be referenced by other drivers.
-+
-+	  If unsure, say N.
-+
- endmenu
- 
- endif
---- a/drivers/nvmem/layouts/Makefile
-+++ b/drivers/nvmem/layouts/Makefile
-@@ -5,3 +5,4 @@
- 
- obj-$(CONFIG_NVMEM_LAYOUT_SL28_VPD) += sl28vpd.o
- obj-$(CONFIG_NVMEM_LAYOUT_ONIE_TLV) += onie-tlv.o
-+obj-$(CONFIG_NVMEM_LAYOUT_U_BOOT_ENV) += u-boot-env.o
---- /dev/null
-+++ b/drivers/nvmem/layouts/u-boot-env.c
-@@ -0,0 +1,211 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (C) 2022 - 2023 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/crc32.h>
-+#include <linux/etherdevice.h>
-+#include <linux/export.h>
-+#include <linux/if_ether.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/nvmem-provider.h>
-+#include <linux/of.h>
-+#include <linux/slab.h>
-+
-+#include "u-boot-env.h"
-+
-+struct u_boot_env_image_single {
-+	__le32 crc32;
-+	uint8_t data[];
-+} __packed;
-+
-+struct u_boot_env_image_redundant {
-+	__le32 crc32;
-+	u8 mark;
-+	uint8_t data[];
-+} __packed;
-+
-+struct u_boot_env_image_broadcom {
-+	__le32 magic;
-+	__le32 len;
-+	__le32 crc32;
-+	DECLARE_FLEX_ARRAY(uint8_t, data);
-+} __packed;
-+
-+static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, int index,
-+						unsigned int offset, void *buf, size_t bytes)
-+{
-+	u8 mac[ETH_ALEN];
-+
-+	if (bytes != 3 * ETH_ALEN - 1)
-+		return -EINVAL;
-+
-+	if (!mac_pton(buf, mac))
-+		return -EINVAL;
-+
-+	if (index)
-+		eth_addr_add(mac, index);
-+
-+	ether_addr_copy(buf, mac);
-+
-+	return 0;
-+}
-+
-+static int u_boot_env_parse_cells(struct device *dev, struct nvmem_device *nvmem, uint8_t *buf,
-+				  size_t data_offset, size_t data_len)
-+{
-+	char *data = buf + data_offset;
-+	char *var, *value, *eq;
-+
-+	for (var = data;
-+	     var < data + data_len && *var;
-+	     var = value + strlen(value) + 1) {
-+		struct nvmem_cell_info info = {};
-+
-+		eq = strchr(var, '=');
-+		if (!eq)
-+			break;
-+		*eq = '\0';
-+		value = eq + 1;
-+
-+		info.name = devm_kstrdup(dev, var, GFP_KERNEL);
-+		if (!info.name)
-+			return -ENOMEM;
-+		info.offset = data_offset + value - data;
-+		info.bytes = strlen(value);
-+		info.np = of_get_child_by_name(dev->of_node, info.name);
-+		if (!strcmp(var, "ethaddr")) {
-+			info.raw_len = strlen(value);
-+			info.bytes = ETH_ALEN;
-+			info.read_post_process = u_boot_env_read_post_process_ethaddr;
-+		}
-+
-+		nvmem_add_one_cell(nvmem, &info);
-+	}
-+
-+	return 0;
-+}
-+
-+int u_boot_env_parse(struct device *dev, struct nvmem_device *nvmem,
-+		     enum u_boot_env_format format)
-+{
-+	size_t crc32_data_offset;
-+	size_t crc32_data_len;
-+	size_t crc32_offset;
-+	__le32 *crc32_addr;
-+	size_t data_offset;
-+	size_t data_len;
-+	size_t dev_size;
-+	uint32_t crc32;
-+	uint32_t calc;
-+	uint8_t *buf;
-+	int bytes;
-+	int err;
-+
-+	dev_size = nvmem_dev_size(nvmem);
-+
-+	buf = kzalloc(dev_size, GFP_KERNEL);
-+	if (!buf) {
-+		err = -ENOMEM;
-+		goto err_out;
-+	}
-+
-+	bytes = nvmem_device_read(nvmem, 0, dev_size, buf);
-+	if (bytes < 0) {
-+		err = bytes;
-+		goto err_kfree;
-+	} else if (bytes != dev_size) {
-+		err = -EIO;
-+		goto err_kfree;
-+	}
-+
-+	switch (format) {
-+	case U_BOOT_FORMAT_SINGLE:
-+		crc32_offset = offsetof(struct u_boot_env_image_single, crc32);
-+		crc32_data_offset = offsetof(struct u_boot_env_image_single, data);
-+		data_offset = offsetof(struct u_boot_env_image_single, data);
-+		break;
-+	case U_BOOT_FORMAT_REDUNDANT:
-+		crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
-+		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, data);
-+		data_offset = offsetof(struct u_boot_env_image_redundant, data);
-+		break;
-+	case U_BOOT_FORMAT_BROADCOM:
-+		crc32_offset = offsetof(struct u_boot_env_image_broadcom, crc32);
-+		crc32_data_offset = offsetof(struct u_boot_env_image_broadcom, data);
-+		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
-+		break;
-+	}
-+
-+	if (dev_size < data_offset) {
-+		dev_err(dev, "Device too small for u-boot-env\n");
-+		err = -EIO;
-+		goto err_kfree;
-+	}
-+
-+	crc32_addr = (__le32 *)(buf + crc32_offset);
-+	crc32 = le32_to_cpu(*crc32_addr);
-+	crc32_data_len = dev_size - crc32_data_offset;
-+	data_len = dev_size - data_offset;
-+
-+	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
-+	if (calc != crc32) {
-+		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
-+		err = -EINVAL;
-+		goto err_kfree;
-+	}
-+
-+	buf[dev_size - 1] = '\0';
-+	err = u_boot_env_parse_cells(dev, nvmem, buf, data_offset, data_len);
-+
-+err_kfree:
-+	kfree(buf);
-+err_out:
-+	return err;
-+}
-+EXPORT_SYMBOL_GPL(u_boot_env_parse);
-+
-+static int u_boot_env_add_cells(struct nvmem_layout *layout)
-+{
-+	struct device *dev = &layout->dev;
-+	enum u_boot_env_format format;
-+
-+	format = (uintptr_t)device_get_match_data(dev);
-+
-+	return u_boot_env_parse(dev, layout->nvmem, format);
-+}
-+
-+static int u_boot_env_probe(struct nvmem_layout *layout)
-+{
-+	layout->add_cells = u_boot_env_add_cells;
-+
-+	return nvmem_layout_register(layout);
-+}
-+
-+static void u_boot_env_remove(struct nvmem_layout *layout)
-+{
-+	nvmem_layout_unregister(layout);
-+}
-+
-+static const struct of_device_id u_boot_env_of_match_table[] = {
-+	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
-+	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
-+	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
-+	{ .compatible = "brcm,env", .data = (void *)U_BOOT_FORMAT_BROADCOM, },
-+	{},
-+};
-+
-+static struct nvmem_layout_driver u_boot_env_layout = {
-+	.driver = {
-+		.name = "u-boot-env-layout",
-+		.of_match_table = u_boot_env_of_match_table,
-+	},
-+	.probe = u_boot_env_probe,
-+	.remove = u_boot_env_remove,
-+};
-+module_nvmem_layout_driver(u_boot_env_layout);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL");
-+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
-+MODULE_DESCRIPTION("NVMEM layout driver for U-Boot environment variables");
---- /dev/null
-+++ b/drivers/nvmem/layouts/u-boot-env.h
-@@ -0,0 +1,15 @@
-+/* SPDX-License-Identifier: GPL-2.0-only */
-+
-+#ifndef _LINUX_NVMEM_LAYOUTS_U_BOOT_ENV_H
-+#define _LINUX_NVMEM_LAYOUTS_U_BOOT_ENV_H
-+
-+enum u_boot_env_format {
-+	U_BOOT_FORMAT_SINGLE,
-+	U_BOOT_FORMAT_REDUNDANT,
-+	U_BOOT_FORMAT_BROADCOM,
-+};
-+
-+int u_boot_env_parse(struct device *dev, struct nvmem_device *nvmem,
-+		     enum u_boot_env_format format);
-+
-+#endif  /* ifndef _LINUX_NVMEM_LAYOUTS_U_BOOT_ENV_H */
---- a/drivers/nvmem/u-boot-env.c
-+++ b/drivers/nvmem/u-boot-env.c
-@@ -3,23 +3,15 @@
-  * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl>
-  */
- 
--#include <linux/crc32.h>
--#include <linux/etherdevice.h>
--#include <linux/if_ether.h>
- #include <linux/mod_devicetable.h>
- #include <linux/module.h>
- #include <linux/mtd/mtd.h>
--#include <linux/nvmem-consumer.h>
- #include <linux/nvmem-provider.h>
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
- 
--enum u_boot_env_format {
--	U_BOOT_FORMAT_SINGLE,
--	U_BOOT_FORMAT_REDUNDANT,
--	U_BOOT_FORMAT_BROADCOM,
--};
-+#include "layouts/u-boot-env.h"
- 
- struct u_boot_env {
- 	struct device *dev;
-@@ -29,24 +21,6 @@ struct u_boot_env {
- 	struct mtd_info *mtd;
- };
- 
--struct u_boot_env_image_single {
--	__le32 crc32;
--	uint8_t data[];
--} __packed;
--
--struct u_boot_env_image_redundant {
--	__le32 crc32;
--	u8 mark;
--	uint8_t data[];
--} __packed;
--
--struct u_boot_env_image_broadcom {
--	__le32 magic;
--	__le32 len;
--	__le32 crc32;
--	DECLARE_FLEX_ARRAY(uint8_t, data);
--} __packed;
--
- static int u_boot_env_read(void *context, unsigned int offset, void *val,
- 			   size_t bytes)
- {
-@@ -69,141 +43,6 @@ static int u_boot_env_read(void *context
- 	return 0;
- }
- 
--static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, int index,
--						unsigned int offset, void *buf, size_t bytes)
--{
--	u8 mac[ETH_ALEN];
--
--	if (bytes != 3 * ETH_ALEN - 1)
--		return -EINVAL;
--
--	if (!mac_pton(buf, mac))
--		return -EINVAL;
--
--	if (index)
--		eth_addr_add(mac, index);
--
--	ether_addr_copy(buf, mac);
--
--	return 0;
--}
--
--static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
--				size_t data_offset, size_t data_len)
--{
--	struct nvmem_device *nvmem = priv->nvmem;
--	struct device *dev = priv->dev;
--	char *data = buf + data_offset;
--	char *var, *value, *eq;
--
--	for (var = data;
--	     var < data + data_len && *var;
--	     var = value + strlen(value) + 1) {
--		struct nvmem_cell_info info = {};
--
--		eq = strchr(var, '=');
--		if (!eq)
--			break;
--		*eq = '\0';
--		value = eq + 1;
--
--		info.name = devm_kstrdup(dev, var, GFP_KERNEL);
--		if (!info.name)
--			return -ENOMEM;
--		info.offset = data_offset + value - data;
--		info.bytes = strlen(value);
--		info.np = of_get_child_by_name(dev->of_node, info.name);
--		if (!strcmp(var, "ethaddr")) {
--			info.raw_len = strlen(value);
--			info.bytes = ETH_ALEN;
--			info.read_post_process = u_boot_env_read_post_process_ethaddr;
--		}
--
--		nvmem_add_one_cell(nvmem, &info);
--	}
--
--	return 0;
--}
--
--static int u_boot_env_parse(struct u_boot_env *priv)
--{
--	struct nvmem_device *nvmem = priv->nvmem;
--	struct device *dev = priv->dev;
--	size_t crc32_data_offset;
--	size_t crc32_data_len;
--	size_t crc32_offset;
--	__le32 *crc32_addr;
--	size_t data_offset;
--	size_t data_len;
--	size_t dev_size;
--	uint32_t crc32;
--	uint32_t calc;
--	uint8_t *buf;
--	int bytes;
--	int err;
--
--	dev_size = nvmem_dev_size(nvmem);
--
--	buf = kzalloc(dev_size, GFP_KERNEL);
--	if (!buf) {
--		err = -ENOMEM;
--		goto err_out;
--	}
--
--	bytes = nvmem_device_read(nvmem, 0, dev_size, buf);
--	if (bytes < 0) {
--		err = bytes;
--		goto err_kfree;
--	} else if (bytes != dev_size) {
--		err = -EIO;
--		goto err_kfree;
--	}
--
--	switch (priv->format) {
--	case U_BOOT_FORMAT_SINGLE:
--		crc32_offset = offsetof(struct u_boot_env_image_single, crc32);
--		crc32_data_offset = offsetof(struct u_boot_env_image_single, data);
--		data_offset = offsetof(struct u_boot_env_image_single, data);
--		break;
--	case U_BOOT_FORMAT_REDUNDANT:
--		crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
--		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, data);
--		data_offset = offsetof(struct u_boot_env_image_redundant, data);
--		break;
--	case U_BOOT_FORMAT_BROADCOM:
--		crc32_offset = offsetof(struct u_boot_env_image_broadcom, crc32);
--		crc32_data_offset = offsetof(struct u_boot_env_image_broadcom, data);
--		data_offset = offsetof(struct u_boot_env_image_broadcom, data);
--		break;
--	}
--
--	if (dev_size < data_offset) {
--		dev_err(dev, "Device too small for u-boot-env\n");
--		err = -EIO;
--		goto err_kfree;
--	}
--
--	crc32_addr = (__le32 *)(buf + crc32_offset);
--	crc32 = le32_to_cpu(*crc32_addr);
--	crc32_data_len = dev_size - crc32_data_offset;
--	data_len = dev_size - data_offset;
--
--	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
--	if (calc != crc32) {
--		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
--		err = -EINVAL;
--		goto err_kfree;
--	}
--
--	buf[dev_size - 1] = '\0';
--	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
--
--err_kfree:
--	kfree(buf);
--err_out:
--	return err;
--}
--
- static int u_boot_env_probe(struct platform_device *pdev)
- {
- 	struct nvmem_config config = {
-@@ -235,7 +74,7 @@ static int u_boot_env_probe(struct platf
- 	if (IS_ERR(priv->nvmem))
- 		return PTR_ERR(priv->nvmem);
- 
--	return u_boot_env_parse(priv);
-+	return u_boot_env_parse(dev, priv->nvmem, priv->format);
- }
- 
- static const struct of_device_id u_boot_env_of_match_table[] = {
diff --git a/target/linux/generic/backport-6.1/850-v6.2-bus-mhi-host-pci_generic-add-support-for-sc8280xp-cr.patch b/target/linux/generic/backport-6.1/850-v6.2-bus-mhi-host-pci_generic-add-support-for-sc8280xp-cr.patch
deleted file mode 100644
index 1bf5196790b5..000000000000
--- a/target/linux/generic/backport-6.1/850-v6.2-bus-mhi-host-pci_generic-add-support-for-sc8280xp-cr.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From a38a6e5d2dc41feeaa839cd61196f86c0ee223b8 Mon Sep 17 00:00:00 2001
-From: Johan Hovold <johan+linaro@kernel.org>
-Date: Fri, 4 Nov 2022 10:39:13 +0100
-Subject: [PATCH 01/13] bus: mhi: host: pci_generic: add support for
- sc8280xp-crd SDX55 variant
-
-The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem
-which uses MBIM.
-
-The exact channel configuration is not known but the Foxconn SDX55
-configuration allows the modem to be used so reuse that one for now.
-
-Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
-Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
-Link: https://lore.kernel.org/r/20221104093913.23347-1-johan+linaro@kernel.org
-[mani: modified the subject to format "bus: mhi: host"]
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -542,6 +542,8 @@ static const struct mhi_pci_dev_info mhi
- static const struct pci_device_id mhi_pci_id_table[] = {
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
- 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
-+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, PCI_VENDOR_ID_QCOM, 0x010c),
-+		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
- 	/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
- 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
- 		.driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
diff --git a/target/linux/generic/backport-6.1/851-v6.2-bus-mhi-host-pci_generic-Add-HP-variant-of-T99W175.patch b/target/linux/generic/backport-6.1/851-v6.2-bus-mhi-host-pci_generic-Add-HP-variant-of-T99W175.patch
deleted file mode 100644
index 6f9fc71a7109..000000000000
--- a/target/linux/generic/backport-6.1/851-v6.2-bus-mhi-host-pci_generic-Add-HP-variant-of-T99W175.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 6a150325917a6df9467beeaa6518ab91ada81d97 Mon Sep 17 00:00:00 2001
-From: Song Fuchang <song.fc@gmail.com>
-Date: Mon, 7 Nov 2022 19:18:35 +0530
-Subject: [PATCH 02/13] bus: mhi: host: pci_generic: Add HP variant of T99W175
-
-The Foxconn T99W175 modem has an HP variant, which has
-the following output from lspci:
-
-01:00.0 Wireless controller [0d40]: Device 03f0:0a6c
-
-It also has some HP-specific serial numbers on the
-metal case. It works well with this driver, so add
-support for this to the pci_generic driver.
-
-Signed-off-by: Song Fuchang <song.fc@gmail.com>
-Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
-[mani: manually applied the patch]
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -599,6 +599,9 @@ static const struct pci_device_id mhi_pc
- 	/* MV32-WB (Cinterion) */
- 	{ PCI_DEVICE(0x1269, 0x00bb),
- 		.driver_data = (kernel_ulong_t) &mhi_mv32_info },
-+	/* T99W175 (sdx55), HP variant */
-+	{ PCI_DEVICE(0x03f0, 0x0a6c),
-+		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
- 	{  }
- };
- MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
diff --git a/target/linux/generic/backport-6.1/852-v6.2-bus-mhi-host-pci_generic-Add-definition-for-some-VID.patch b/target/linux/generic/backport-6.1/852-v6.2-bus-mhi-host-pci_generic-Add-definition-for-some-VID.patch
deleted file mode 100644
index 12419fbe397e..000000000000
--- a/target/linux/generic/backport-6.1/852-v6.2-bus-mhi-host-pci_generic-Add-definition-for-some-VID.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From e8bc362f158f45185778e2bec081146aeeb283b5 Mon Sep 17 00:00:00 2001
-From: Slark Xiao <slark_xiao@163.com>
-Date: Mon, 7 Nov 2022 19:27:00 +0800
-Subject: [PATCH 03/13] bus: mhi: host: pci_generic: Add definition for some
- VIDs
-
-To make code neat and for convenience purpose, add definition for some
-VIDs. Adding it locally until these VIDs are used in multiple places.
-
-Signed-off-by: Slark Xiao <slark_xiao@163.com>
-Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
-Link: https://lore.kernel.org/r/20221107112700.773-1-slark_xiao@163.com
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 18 +++++++++++-------
- 1 file changed, 11 insertions(+), 7 deletions(-)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -24,6 +24,10 @@
- 
- #define HEALTH_CHECK_PERIOD (HZ * 2)
- 
-+/* PCI VID definitions */
-+#define PCI_VENDOR_ID_THALES	0x1269
-+#define PCI_VENDOR_ID_QUECTEL	0x1eac
-+
- /**
-  * struct mhi_pci_dev_info - MHI PCI device specific information
-  * @config: MHI controller configuration
-@@ -560,11 +564,11 @@ static const struct pci_device_id mhi_pc
- 		.driver_data = (kernel_ulong_t) &mhi_telit_fn990_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
- 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
--	{ PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
--	{ PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
--	{ PCI_DEVICE(0x1eac, 0x2001), /* EM120R-GL for FCCL (sdx24) */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
- 	/* T99W175 (sdx55), Both for eSIM and Non-eSIM */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab),
-@@ -588,16 +592,16 @@ static const struct pci_device_id mhi_pc
- 	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9),
- 		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
- 	/* MV31-W (Cinterion) */
--	{ PCI_DEVICE(0x1269, 0x00b3),
-+	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3),
- 		.driver_data = (kernel_ulong_t) &mhi_mv31_info },
- 	/* MV31-W (Cinterion), based on new baseline */
--	{ PCI_DEVICE(0x1269, 0x00b4),
-+	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b4),
- 		.driver_data = (kernel_ulong_t) &mhi_mv31_info },
- 	/* MV32-WA (Cinterion) */
--	{ PCI_DEVICE(0x1269, 0x00ba),
-+	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00ba),
- 		.driver_data = (kernel_ulong_t) &mhi_mv32_info },
- 	/* MV32-WB (Cinterion) */
--	{ PCI_DEVICE(0x1269, 0x00bb),
-+	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00bb),
- 		.driver_data = (kernel_ulong_t) &mhi_mv32_info },
- 	/* T99W175 (sdx55), HP variant */
- 	{ PCI_DEVICE(0x03f0, 0x0a6c),
diff --git a/target/linux/generic/backport-6.1/853-v6.2-bus-mhi-host-pci_generic-Drop-redundant-pci_enable_p.patch b/target/linux/generic/backport-6.1/853-v6.2-bus-mhi-host-pci_generic-Drop-redundant-pci_enable_p.patch
deleted file mode 100644
index 943227d2a809..000000000000
--- a/target/linux/generic/backport-6.1/853-v6.2-bus-mhi-host-pci_generic-Drop-redundant-pci_enable_p.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 6c00e1e4e9817e85b8ba83024cfa88382f898841 Mon Sep 17 00:00:00 2001
-From: Bjorn Helgaas <bhelgaas@google.com>
-Date: Tue, 7 Mar 2023 14:16:25 -0600
-Subject: [PATCH 04/13] bus: mhi: host: pci_generic: Drop redundant
- pci_enable_pcie_error_reporting()
-
-pci_enable_pcie_error_reporting() enables the device to send ERR_*
-Messages.  Since commit <f26e58bf6f54> ("PCI/AER: Enable error reporting
-when AER is native"), the PCI core does this for all devices during
-enumeration, so the driver doesn't need to do it itself.
-
-Remove the redundant pci_enable_pcie_error_reporting() call from the
-driver.  Also remove the corresponding pci_disable_pcie_error_reporting()
-from the driver .remove() path.
-
-Note that this only controls ERR_* Messages from the device.  An ERR_*
-Message may cause the Root Port to generate an interrupt, depending on the
-AER Root Error Command register managed by the AER service driver.
-
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
-Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
-Link: https://lore.kernel.org/r/20230307201625.879567-1-helgaas@kernel.org
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 8 +-------
- 1 file changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -8,7 +8,6 @@
-  * Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org>
-  */
- 
--#include <linux/aer.h>
- #include <linux/delay.h>
- #include <linux/device.h>
- #include <linux/mhi.h>
-@@ -904,11 +903,9 @@ static int mhi_pci_probe(struct pci_dev
- 	mhi_pdev->pci_state = pci_store_saved_state(pdev);
- 	pci_load_saved_state(pdev, NULL);
- 
--	pci_enable_pcie_error_reporting(pdev);
--
- 	err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config);
- 	if (err)
--		goto err_disable_reporting;
-+		return err;
- 
- 	/* MHI bus does not power up the controller by default */
- 	err = mhi_prepare_for_power_up(mhi_cntrl);
-@@ -942,8 +939,6 @@ err_unprepare:
- 	mhi_unprepare_after_power_down(mhi_cntrl);
- err_unregister:
- 	mhi_unregister_controller(mhi_cntrl);
--err_disable_reporting:
--	pci_disable_pcie_error_reporting(pdev);
- 
- 	return err;
- }
-@@ -966,7 +961,6 @@ static void mhi_pci_remove(struct pci_de
- 		pm_runtime_get_noresume(&pdev->dev);
- 
- 	mhi_unregister_controller(mhi_cntrl);
--	pci_disable_pcie_error_reporting(pdev);
- }
- 
- static void mhi_pci_shutdown(struct pci_dev *pdev)
diff --git a/target/linux/generic/backport-6.1/854-v6.4-bus-mhi-pci_generic-Add-Foxconn-T99W510.patch b/target/linux/generic/backport-6.1/854-v6.4-bus-mhi-pci_generic-Add-Foxconn-T99W510.patch
deleted file mode 100644
index 8ec6f3e76fe3..000000000000
--- a/target/linux/generic/backport-6.1/854-v6.4-bus-mhi-pci_generic-Add-Foxconn-T99W510.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 537350abfcc6b639884d1ef7bff35d31a624549b Mon Sep 17 00:00:00 2001
-From: Slark Xiao <slark_xiao@163.com>
-Date: Wed, 29 Mar 2023 15:22:39 +0800
-Subject: [PATCH 05/13] bus: mhi: pci_generic: Add Foxconn T99W510
-
-The Foxconn T99W510 device is designed based on Qualcomm
-SDX24. Add 3 variants for different potential customer.
-
-Signed-off-by: Slark Xiao <slark_xiao@163.com>
-Link: https://lore.kernel.org/r/20230329072239.93632-1-slark_xiao@163.com
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -363,6 +363,15 @@ static const struct mhi_controller_confi
- 	.event_cfg = mhi_foxconn_sdx55_events,
- };
- 
-+static const struct mhi_pci_dev_info mhi_foxconn_sdx24_info = {
-+	.name = "foxconn-sdx24",
-+	.config = &modem_foxconn_sdx55_config,
-+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
-+	.dma_data_width = 32,
-+	.mru_default = 32768,
-+	.sideband_wake = false,
-+};
-+
- static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
- 	.name = "foxconn-sdx55",
- 	.fw = "qcom/sdx55m/sbl1.mbn",
-@@ -590,6 +599,15 @@ static const struct pci_device_id mhi_pc
- 	/* T99W373 (sdx62) */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9),
- 		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
-+	/* T99W510 (sdx24), variant 1 */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f0),
-+		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info },
-+	/* T99W510 (sdx24), variant 2 */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f1),
-+		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info },
-+	/* T99W510 (sdx24), variant 3 */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f2),
-+		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info },
- 	/* MV31-W (Cinterion) */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3),
- 		.driver_data = (kernel_ulong_t) &mhi_mv31_info },
diff --git a/target/linux/generic/backport-6.1/855-v6.6-bus-mhi-host-pci_generic-Add-support-for-IP_SW0-chan.patch b/target/linux/generic/backport-6.1/855-v6.6-bus-mhi-host-pci_generic-Add-support-for-IP_SW0-chan.patch
deleted file mode 100644
index 8c319ebeb7a4..000000000000
--- a/target/linux/generic/backport-6.1/855-v6.6-bus-mhi-host-pci_generic-Add-support-for-IP_SW0-chan.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 440b01a2a9a62352cfa355354d3a4de6c5d96adf Mon Sep 17 00:00:00 2001
-From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-Date: Fri, 19 May 2023 19:28:03 +0530
-Subject: [PATCH 06/13] bus: mhi: host: pci_generic: Add support for IP_SW0
- channels
-
-IP_SW0 channels are used to transfer data over the networking interface
-between MHI endpoint and the host. Define the channels in the MHI v1
-channel config along with dedicated event rings.
-
-Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
-Link: https://lore.kernel.org/r/20230519135803.13850-1-manivannan.sadhasivam@linaro.org
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 26 ++++++++++++++++++++++----
- 1 file changed, 22 insertions(+), 4 deletions(-)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -212,6 +212,19 @@ struct mhi_pci_dev_info {
- 		.offload_channel = false,	\
- 	}
- 
-+#define MHI_EVENT_CONFIG_SW_DATA(ev_ring, el_count) \
-+	{					\
-+		.num_elements = el_count,	\
-+		.irq_moderation_ms = 0,		\
-+		.irq = (ev_ring) + 1,		\
-+		.priority = 1,			\
-+		.mode = MHI_DB_BRST_DISABLE,	\
-+		.data_type = MHI_ER_DATA,	\
-+		.hardware_event = false,	\
-+		.client_managed = false,	\
-+		.offload_channel = false,	\
-+	}
-+
- #define MHI_EVENT_CONFIG_HW_DATA(ev_ring, el_count, ch_num) \
- 	{					\
- 		.num_elements = el_count,	\
-@@ -237,8 +250,10 @@ static const struct mhi_channel_config m
- 	MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0),
- 	MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
- 	MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
--	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
--	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3),
-+	MHI_CHANNEL_CONFIG_UL(46, "IP_SW0", 64, 2),
-+	MHI_CHANNEL_CONFIG_DL(47, "IP_SW0", 64, 3),
-+	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 4),
-+	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 5),
- };
- 
- static struct mhi_event_config modem_qcom_v1_mhi_events[] = {
-@@ -246,9 +261,12 @@ static struct mhi_event_config modem_qco
- 	MHI_EVENT_CONFIG_CTRL(0, 64),
- 	/* DIAG dedicated event ring */
- 	MHI_EVENT_CONFIG_DATA(1, 128),
-+	/* Software channels dedicated event ring */
-+	MHI_EVENT_CONFIG_SW_DATA(2, 64),
-+	MHI_EVENT_CONFIG_SW_DATA(3, 64),
- 	/* Hardware channels request dedicated hardware event rings */
--	MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
--	MHI_EVENT_CONFIG_HW_DATA(3, 2048, 101)
-+	MHI_EVENT_CONFIG_HW_DATA(4, 1024, 100),
-+	MHI_EVENT_CONFIG_HW_DATA(5, 2048, 101)
- };
- 
- static const struct mhi_controller_config modem_qcom_v1_mhiv_config = {
diff --git a/target/linux/generic/backport-6.1/856-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-EM1.patch b/target/linux/generic/backport-6.1/856-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-EM1.patch
deleted file mode 100644
index 2e01d4fd6502..000000000000
--- a/target/linux/generic/backport-6.1/856-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-EM1.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 2dc36ddb6ca4eeda21204dc9e57750494c74c06d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Duke=20Xin=20=28=E8=BE=9B=E5=AE=89=E6=96=87=29?=
- <duke_xinanwen@163.com>
-Date: Thu, 8 Jun 2023 02:29:27 -0700
-Subject: [PATCH 07/13] bus: mhi: host: pci_generic: Add support for Quectel
- EM160R-GL modem
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This modem is identical to the previous EM160R-GL modem with same product
-name. But this one is designed for a specific laptop usecase, hence Quectel
-got a new PID.
-
-Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com>
-Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
-Link: https://lore.kernel.org/r/20230608092927.2893-1-duke_xinanwen@163.com
-[mani: modified the commit message and subject]
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -594,6 +594,8 @@ static const struct pci_device_id mhi_pc
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
-+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x100d), /* EM160R-GL (sdx24) */
-+		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
- 	/* T99W175 (sdx55), Both for eSIM and Non-eSIM */
diff --git a/target/linux/generic/backport-6.1/857-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-RM5.patch b/target/linux/generic/backport-6.1/857-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-RM5.patch
deleted file mode 100644
index f547eb972ffa..000000000000
--- a/target/linux/generic/backport-6.1/857-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-RM5.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 7e2f6cb11c24799b6851142c4a5ce69bdc630364 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Duke=20Xin=20=28=E8=BE=9B=E5=AE=89=E6=96=87=29?=
- <duke_xinanwen@163.com>
-Date: Thu, 29 Jun 2023 23:23:18 -0700
-Subject: [PATCH 08/13] bus: mhi: host: pci_generic: Add support for Quectel
- RM520N-GL modem
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add MHI interface definition for RM520 product based on Qualcomm SDX6X chip
-
-Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com>
-Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
-Link: https://lore.kernel.org/r/20230630062318.12114-1-duke_xinanwen@163.com
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -352,6 +352,16 @@ static const struct mhi_pci_dev_info mhi
- 	.sideband_wake = true,
- };
- 
-+static const struct mhi_pci_dev_info mhi_quectel_rm5xx_info = {
-+	.name = "quectel-rm5xx",
-+	.edl = "qcom/prog_firehose_sdx6x.elf",
-+	.config = &modem_quectel_em1xx_config,
-+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
-+	.dma_data_width = 32,
-+	.mru_default = 32768,
-+	.sideband_wake = true,
-+};
-+
- static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
- 	MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 0),
- 	MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 0),
-@@ -594,6 +604,9 @@ static const struct pci_device_id mhi_pc
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
-+	/* RM520N-GL (sdx6x), eSIM */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1004),
-+		.driver_data = (kernel_ulong_t) &mhi_quectel_rm5xx_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x100d), /* EM160R-GL (sdx24) */
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */
diff --git a/target/linux/generic/backport-6.1/858-v6.6-bus-mhi-host-pci_generic-Add-support-for-Dell-DW5932.patch b/target/linux/generic/backport-6.1/858-v6.6-bus-mhi-host-pci_generic-Add-support-for-Dell-DW5932.patch
deleted file mode 100644
index ba0e156a8cdb..000000000000
--- a/target/linux/generic/backport-6.1/858-v6.6-bus-mhi-host-pci_generic-Add-support-for-Dell-DW5932.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 5e20ac8e7d3221e079e87066c4e8f4b64bd58ccb Mon Sep 17 00:00:00 2001
-From: Slark Xiao <slark_xiao@163.com>
-Date: Wed, 12 Jul 2023 16:37:41 +0800
-Subject: [PATCH 09/13] bus: mhi: host: pci_generic: Add support for Dell
- DW5932e
-
-The DW5932e has 2 variants: eSIM(DW5932e-eSIM) and non-eSIM(DW5932e).
-Both of them are designed based on Qualcomm SDX62 and it will
-align with the Foxconn sdx65 settings.
-
-Signed-off-by: Slark Xiao <slark_xiao@163.com>
-Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
-Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
-Link: https://lore.kernel.org/r/20230712083741.7615-1-slark_xiao@163.com
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -641,6 +641,12 @@ static const struct pci_device_id mhi_pc
- 	/* T99W510 (sdx24), variant 3 */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f2),
- 		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info },
-+	/* DW5932e-eSIM (sdx62), With eSIM */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f5),
-+		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
-+	/* DW5932e (sdx62), Non-eSIM */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f9),
-+		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
- 	/* MV31-W (Cinterion) */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3),
- 		.driver_data = (kernel_ulong_t) &mhi_mv31_info },
diff --git a/target/linux/generic/backport-6.1/859-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-RM5.patch b/target/linux/generic/backport-6.1/859-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-RM5.patch
deleted file mode 100644
index a09ae6fa478a..000000000000
--- a/target/linux/generic/backport-6.1/859-v6.6-bus-mhi-host-pci_generic-Add-support-for-Quectel-RM5.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 8be9e92a2c8f26fd7482acc2323c6dc2a4ad43aa Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Duke=20Xin=20=28=E8=BE=9B=E5=AE=89=E6=96=87=29?=
- <duke_xinanwen@163.com>
-Date: Sun, 6 Aug 2023 20:04:54 -0700
-Subject: [PATCH 10/13] bus: mhi: host: pci_generic: Add support for Quectel
- RM520N-GL Lenovo variant
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Quectel's RM520N-GL Lenovo variant is same as that of the existing
-RM520N-GL modem and uses the same config. But this one is designed for
-Lenovo laptop usecase, hence Quectel got a new PID.
-
-Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com>
-Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
-Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
-Link: https://lore.kernel.org/r/20230807030454.37255-1-duke_xinanwen@163.com
-[mani: tweaked subject and commit message a bit]
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -607,6 +607,9 @@ static const struct pci_device_id mhi_pc
- 	/* RM520N-GL (sdx6x), eSIM */
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1004),
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_rm5xx_info },
-+	/* RM520N-GL (sdx6x), Lenovo variant */
-+	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1007),
-+		.driver_data = (kernel_ulong_t) &mhi_quectel_rm5xx_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x100d), /* EM160R-GL (sdx24) */
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */
diff --git a/target/linux/generic/backport-6.1/861-v6.8-bus-mhi-host-Add-a-separate-timeout-parameter-for-wa.patch b/target/linux/generic/backport-6.1/861-v6.8-bus-mhi-host-Add-a-separate-timeout-parameter-for-wa.patch
deleted file mode 100644
index 30d833adffdd..000000000000
--- a/target/linux/generic/backport-6.1/861-v6.8-bus-mhi-host-Add-a-separate-timeout-parameter-for-wa.patch
+++ /dev/null
@@ -1,175 +0,0 @@
-From 6ab3d50b106c9aea123a80551a6c9deace83b914 Mon Sep 17 00:00:00 2001
-From: Qiang Yu <quic_qianyu@quicinc.com>
-Date: Tue, 7 Nov 2023 16:14:49 +0800
-Subject: [PATCH] bus: mhi: host: Add a separate timeout parameter for waiting
- ready
-
-Some devices(eg. SDX75) take longer than expected (default, 8 seconds) to
-set ready after reboot. Hence add optional ready timeout parameter and pass
-the appropriate timeout value to mhi_poll_reg_field() to wait enough for
-device ready as part of power up sequence.
-
-Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
-Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-Link: https://lore.kernel.org/r/1699344890-87076-2-git-send-email-quic_qianyu@quicinc.com
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/init.c     |  1 +
- drivers/bus/mhi/host/internal.h |  2 +-
- drivers/bus/mhi/host/main.c     |  5 +++--
- drivers/bus/mhi/host/pm.c       | 24 +++++++++++++++++-------
- include/linux/mhi.h             |  4 ++++
- 5 files changed, 26 insertions(+), 10 deletions(-)
-
---- a/drivers/bus/mhi/host/init.c
-+++ b/drivers/bus/mhi/host/init.c
-@@ -882,6 +882,7 @@ static int parse_config(struct mhi_contr
- 	if (!mhi_cntrl->timeout_ms)
- 		mhi_cntrl->timeout_ms = MHI_TIMEOUT_MS;
- 
-+	mhi_cntrl->ready_timeout_ms = config->ready_timeout_ms;
- 	mhi_cntrl->bounce_buf = config->use_bounce_buf;
- 	mhi_cntrl->buffer_len = config->buf_len;
- 	if (!mhi_cntrl->buffer_len)
---- a/drivers/bus/mhi/host/internal.h
-+++ b/drivers/bus/mhi/host/internal.h
-@@ -324,7 +324,7 @@ int __must_check mhi_read_reg_field(stru
- 				    u32 *out);
- int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl,
- 				    void __iomem *base, u32 offset, u32 mask,
--				    u32 val, u32 delayus);
-+				    u32 val, u32 delayus, u32 timeout_ms);
- void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
- 		   u32 offset, u32 val);
- int __must_check mhi_write_reg_field(struct mhi_controller *mhi_cntrl,
---- a/drivers/bus/mhi/host/main.c
-+++ b/drivers/bus/mhi/host/main.c
-@@ -40,10 +40,11 @@ int __must_check mhi_read_reg_field(stru
- 
- int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl,
- 				    void __iomem *base, u32 offset,
--				    u32 mask, u32 val, u32 delayus)
-+				    u32 mask, u32 val, u32 delayus,
-+				    u32 timeout_ms)
- {
- 	int ret;
--	u32 out, retry = (mhi_cntrl->timeout_ms * 1000) / delayus;
-+	u32 out, retry = (timeout_ms * 1000) / delayus;
- 
- 	while (retry--) {
- 		ret = mhi_read_reg_field(mhi_cntrl, base, offset, mask, &out);
---- a/drivers/bus/mhi/host/pm.c
-+++ b/drivers/bus/mhi/host/pm.c
-@@ -171,6 +171,7 @@ int mhi_ready_state_transition(struct mh
- 	enum mhi_pm_state cur_state;
- 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
- 	u32 interval_us = 25000; /* poll register field every 25 milliseconds */
-+	u32 timeout_ms;
- 	int ret, i;
- 
- 	/* Check if device entered error state */
-@@ -181,14 +182,18 @@ int mhi_ready_state_transition(struct mh
- 
- 	/* Wait for RESET to be cleared and READY bit to be set by the device */
- 	ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
--				 MHICTRL_RESET_MASK, 0, interval_us);
-+				 MHICTRL_RESET_MASK, 0, interval_us,
-+				 mhi_cntrl->timeout_ms);
- 	if (ret) {
- 		dev_err(dev, "Device failed to clear MHI Reset\n");
- 		return ret;
- 	}
- 
-+	timeout_ms = mhi_cntrl->ready_timeout_ms ?
-+		mhi_cntrl->ready_timeout_ms : mhi_cntrl->timeout_ms;
- 	ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHISTATUS,
--				 MHISTATUS_READY_MASK, 1, interval_us);
-+				 MHISTATUS_READY_MASK, 1, interval_us,
-+				 timeout_ms);
- 	if (ret) {
- 		dev_err(dev, "Device failed to enter MHI Ready\n");
- 		return ret;
-@@ -487,7 +492,7 @@ static void mhi_pm_disable_transition(st
- 
- 		/* Wait for the reset bit to be cleared by the device */
- 		ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
--				 MHICTRL_RESET_MASK, 0, 25000);
-+				 MHICTRL_RESET_MASK, 0, 25000, mhi_cntrl->timeout_ms);
- 		if (ret)
- 			dev_err(dev, "Device failed to clear MHI Reset\n");
- 
-@@ -500,8 +505,8 @@ static void mhi_pm_disable_transition(st
- 		if (!MHI_IN_PBL(mhi_get_exec_env(mhi_cntrl))) {
- 			/* wait for ready to be set */
- 			ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs,
--						 MHISTATUS,
--						 MHISTATUS_READY_MASK, 1, 25000);
-+						 MHISTATUS, MHISTATUS_READY_MASK,
-+						 1, 25000, mhi_cntrl->timeout_ms);
- 			if (ret)
- 				dev_err(dev, "Device failed to enter READY state\n");
- 		}
-@@ -1125,7 +1130,8 @@ int mhi_async_power_up(struct mhi_contro
- 	if (state == MHI_STATE_SYS_ERR) {
- 		mhi_set_mhi_state(mhi_cntrl, MHI_STATE_RESET);
- 		ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
--				 MHICTRL_RESET_MASK, 0, interval_us);
-+				 MHICTRL_RESET_MASK, 0, interval_us,
-+				 mhi_cntrl->timeout_ms);
- 		if (ret) {
- 			dev_info(dev, "Failed to reset MHI due to syserr state\n");
- 			goto error_exit;
-@@ -1216,14 +1222,18 @@ EXPORT_SYMBOL_GPL(mhi_power_down);
- int mhi_sync_power_up(struct mhi_controller *mhi_cntrl)
- {
- 	int ret = mhi_async_power_up(mhi_cntrl);
-+	u32 timeout_ms;
- 
- 	if (ret)
- 		return ret;
- 
-+	/* Some devices need more time to set ready during power up */
-+	timeout_ms = mhi_cntrl->ready_timeout_ms ?
-+		mhi_cntrl->ready_timeout_ms : mhi_cntrl->timeout_ms;
- 	wait_event_timeout(mhi_cntrl->state_event,
- 			   MHI_IN_MISSION_MODE(mhi_cntrl->ee) ||
- 			   MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
--			   msecs_to_jiffies(mhi_cntrl->timeout_ms));
-+			   msecs_to_jiffies(timeout_ms));
- 
- 	ret = (MHI_IN_MISSION_MODE(mhi_cntrl->ee)) ? 0 : -ETIMEDOUT;
- 	if (ret)
---- a/include/linux/mhi.h
-+++ b/include/linux/mhi.h
-@@ -266,6 +266,7 @@ struct mhi_event_config {
-  * struct mhi_controller_config - Root MHI controller configuration
-  * @max_channels: Maximum number of channels supported
-  * @timeout_ms: Timeout value for operations. 0 means use default
-+ * @ready_timeout_ms: Timeout value for waiting device to be ready (optional)
-  * @buf_len: Size of automatically allocated buffers. 0 means use default
-  * @num_channels: Number of channels defined in @ch_cfg
-  * @ch_cfg: Array of defined channels
-@@ -277,6 +278,7 @@ struct mhi_event_config {
- struct mhi_controller_config {
- 	u32 max_channels;
- 	u32 timeout_ms;
-+	u32 ready_timeout_ms;
- 	u32 buf_len;
- 	u32 num_channels;
- 	const struct mhi_channel_config *ch_cfg;
-@@ -326,6 +328,7 @@ struct mhi_controller_config {
-  * @pm_mutex: Mutex for suspend/resume operation
-  * @pm_lock: Lock for protecting MHI power management state
-  * @timeout_ms: Timeout in ms for state transitions
-+ * @ready_timeout_ms: Timeout in ms for waiting device to be ready (optional)
-  * @pm_state: MHI power management state
-  * @db_access: DB access states
-  * @ee: MHI device execution environment
-@@ -413,6 +416,7 @@ struct mhi_controller {
- 	struct mutex pm_mutex;
- 	rwlock_t pm_lock;
- 	u32 timeout_ms;
-+	u32 ready_timeout_ms;
- 	u32 pm_state;
- 	u32 db_access;
- 	enum mhi_ee_type ee;
diff --git a/target/linux/generic/backport-6.1/862-v6.8-bus-mhi-host-pci_generic-Add-SDX75-based-modem-suppo.patch b/target/linux/generic/backport-6.1/862-v6.8-bus-mhi-host-pci_generic-Add-SDX75-based-modem-suppo.patch
deleted file mode 100644
index 944747ac5616..000000000000
--- a/target/linux/generic/backport-6.1/862-v6.8-bus-mhi-host-pci_generic-Add-SDX75-based-modem-suppo.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From b2f401efbff8878be31b2bce6e8d7bdad23e6f12 Mon Sep 17 00:00:00 2001
-From: Qiang Yu <quic_qianyu@quicinc.com>
-Date: Tue, 7 Nov 2023 16:14:50 +0800
-Subject: [PATCH 12/13] bus: mhi: host: pci_generic: Add SDX75 based modem
- support
-
-Add generic info for SDX75 based modems. SDX75 takes longer to set ready
-during power up. Hence use separate configuration.
-
-Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
-Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-Link: https://lore.kernel.org/r/1699344890-87076-3-git-send-email-quic_qianyu@quicinc.com
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -269,6 +269,16 @@ static struct mhi_event_config modem_qco
- 	MHI_EVENT_CONFIG_HW_DATA(5, 2048, 101)
- };
- 
-+static const struct mhi_controller_config modem_qcom_v2_mhiv_config = {
-+	.max_channels = 128,
-+	.timeout_ms = 8000,
-+	.ready_timeout_ms = 50000,
-+	.num_channels = ARRAY_SIZE(modem_qcom_v1_mhi_channels),
-+	.ch_cfg = modem_qcom_v1_mhi_channels,
-+	.num_events = ARRAY_SIZE(modem_qcom_v1_mhi_events),
-+	.event_cfg = modem_qcom_v1_mhi_events,
-+};
-+
- static const struct mhi_controller_config modem_qcom_v1_mhiv_config = {
- 	.max_channels = 128,
- 	.timeout_ms = 8000,
-@@ -278,6 +288,16 @@ static const struct mhi_controller_confi
- 	.event_cfg = modem_qcom_v1_mhi_events,
- };
- 
-+static const struct mhi_pci_dev_info mhi_qcom_sdx75_info = {
-+	.name = "qcom-sdx75m",
-+	.fw = "qcom/sdx75m/xbl.elf",
-+	.edl = "qcom/sdx75m/edl.mbn",
-+	.config = &modem_qcom_v2_mhiv_config,
-+	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
-+	.dma_data_width = 32,
-+	.sideband_wake = false,
-+};
-+
- static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = {
- 	.name = "qcom-sdx65m",
- 	.fw = "qcom/sdx65m/xbl.elf",
-@@ -600,6 +620,8 @@ static const struct pci_device_id mhi_pc
- 		.driver_data = (kernel_ulong_t) &mhi_telit_fn990_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
- 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
-+	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0309),
-+		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx75_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */
- 		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
- 	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */
diff --git a/target/linux/generic/backport-6.1/863-stable-bus-mhi-host-pci_generic-constify-modem_telit_fn980_.patch b/target/linux/generic/backport-6.1/863-stable-bus-mhi-host-pci_generic-constify-modem_telit_fn980_.patch
deleted file mode 100644
index 085e8862ae6a..000000000000
--- a/target/linux/generic/backport-6.1/863-stable-bus-mhi-host-pci_generic-constify-modem_telit_fn980_.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 5f157aa89b876e82d6aafb2d009979118d0bdd2b Mon Sep 17 00:00:00 2001
-From: Jeff Johnson <quic_jjohnson@quicinc.com>
-Date: Thu, 22 Feb 2024 18:00:23 -0800
-Subject: [PATCH 13/13] bus: mhi: host: pci_generic: constify
- modem_telit_fn980_hw_v1_config
-
-MHI expects the controller configs to be const, and all of the other ones
-in this file already are, so constify modem_telit_fn980_hw_v1_config.
-
-Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
-Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-Link: https://lore.kernel.org/r/20240222-mhi-const-bus-mhi-host-pci_generic-v1-1-d4c9b0b0a7a5@quicinc.com
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
- drivers/bus/mhi/host/pci_generic.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/bus/mhi/host/pci_generic.c
-+++ b/drivers/bus/mhi/host/pci_generic.c
-@@ -538,7 +538,7 @@ static struct mhi_event_config mhi_telit
- 	MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101)
- };
- 
--static struct mhi_controller_config modem_telit_fn980_hw_v1_config = {
-+static const struct mhi_controller_config modem_telit_fn980_hw_v1_config = {
- 	.max_channels = 128,
- 	.timeout_ms = 20000,
- 	.num_channels = ARRAY_SIZE(mhi_telit_fn980_hw_v1_channels),
diff --git a/target/linux/generic/backport-6.1/864-v6.6-bus-mhi-host-allow-MHI-client-drivers-to-provide-the.patch b/target/linux/generic/backport-6.1/864-v6.6-bus-mhi-host-allow-MHI-client-drivers-to-provide-the.patch
deleted file mode 100644
index a04b19b15734..000000000000
--- a/target/linux/generic/backport-6.1/864-v6.6-bus-mhi-host-allow-MHI-client-drivers-to-provide-the.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From: Kalle Valo <quic_kvalo@quicinc.com>
-Date: Thu, 27 Jul 2023 13:04:28 +0300
-Subject: [PATCH] bus: mhi: host: allow MHI client drivers to provide the
- firmware via a pointer
-
-Currently MHI loads the firmware image from the path provided by client
-devices. ath11k needs to support firmware image embedded along with meta
-data (named as firmware-2.bin). So allow the client driver to request the
-firmware file from user space on it's own and provide the firmware image
-data and size to MHI via a pointer struct mhi_controller::fw_data.
-
-This is an optional feature, if fw_data is NULL MHI load the firmware using
-the name from struct mhi_controller::fw_image string as before.
-
-Tested with ath11k and WCN6855 hw2.0.
-
-Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
-Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
-Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
-Link: https://lore.kernel.org/r/20230727100430.3603551-2-kvalo@kernel.org
-[mani: wrapped commit message to 75 columns]
-Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
----
-
---- a/drivers/bus/mhi/host/boot.c
-+++ b/drivers/bus/mhi/host/boot.c
-@@ -367,12 +367,10 @@ error_alloc_mhi_buf:
- }
- 
- static void mhi_firmware_copy(struct mhi_controller *mhi_cntrl,
--			      const struct firmware *firmware,
-+			      const u8 *buf, size_t remainder,
- 			      struct image_info *img_info)
- {
--	size_t remainder = firmware->size;
- 	size_t to_cpy;
--	const u8 *buf = firmware->data;
- 	struct mhi_buf *mhi_buf = img_info->mhi_buf;
- 	struct bhi_vec_entry *bhi_vec = img_info->bhi_vec;
- 
-@@ -395,9 +393,10 @@ void mhi_fw_load_handler(struct mhi_cont
- 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
- 	enum mhi_pm_state new_state;
- 	const char *fw_name;
-+	const u8 *fw_data;
- 	void *buf;
- 	dma_addr_t dma_addr;
--	size_t size;
-+	size_t size, fw_sz;
- 	int i, ret;
- 
- 	if (MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state)) {
-@@ -427,6 +426,20 @@ void mhi_fw_load_handler(struct mhi_cont
- 	fw_name = (mhi_cntrl->ee == MHI_EE_EDL) ?
- 		mhi_cntrl->edl_image : mhi_cntrl->fw_image;
- 
-+	/* check if the driver has already provided the firmware data */
-+	if (!fw_name && mhi_cntrl->fbc_download &&
-+	    mhi_cntrl->fw_data && mhi_cntrl->fw_sz) {
-+		if (!mhi_cntrl->sbl_size) {
-+			dev_err(dev, "fw_data provided but no sbl_size\n");
-+			goto error_fw_load;
-+		}
-+
-+		size = mhi_cntrl->sbl_size;
-+		fw_data = mhi_cntrl->fw_data;
-+		fw_sz = mhi_cntrl->fw_sz;
-+		goto skip_req_fw;
-+	}
-+
- 	if (!fw_name || (mhi_cntrl->fbc_download && (!mhi_cntrl->sbl_size ||
- 						     !mhi_cntrl->seg_len))) {
- 		dev_err(dev,
-@@ -446,6 +459,10 @@ void mhi_fw_load_handler(struct mhi_cont
- 	if (size > firmware->size)
- 		size = firmware->size;
- 
-+	fw_data = firmware->data;
-+	fw_sz = firmware->size;
-+
-+skip_req_fw:
- 	buf = dma_alloc_coherent(mhi_cntrl->cntrl_dev, size, &dma_addr,
- 				 GFP_KERNEL);
- 	if (!buf) {
-@@ -454,7 +471,7 @@ void mhi_fw_load_handler(struct mhi_cont
- 	}
- 
- 	/* Download image using BHI */
--	memcpy(buf, firmware->data, size);
-+	memcpy(buf, fw_data, size);
- 	ret = mhi_fw_load_bhi(mhi_cntrl, dma_addr, size);
- 	dma_free_coherent(mhi_cntrl->cntrl_dev, size, buf, dma_addr);
- 
-@@ -466,7 +483,7 @@ void mhi_fw_load_handler(struct mhi_cont
- 	}
- 
- 	/* Wait for ready since EDL image was loaded */
--	if (fw_name == mhi_cntrl->edl_image) {
-+	if (fw_name && fw_name == mhi_cntrl->edl_image) {
- 		release_firmware(firmware);
- 		goto fw_load_ready_state;
- 	}
-@@ -480,15 +497,14 @@ void mhi_fw_load_handler(struct mhi_cont
- 	 * device transitioning into MHI READY state
- 	 */
- 	if (mhi_cntrl->fbc_download) {
--		ret = mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->fbc_image,
--					   firmware->size);
-+		ret = mhi_alloc_bhie_table(mhi_cntrl, &mhi_cntrl->fbc_image, fw_sz);
- 		if (ret) {
- 			release_firmware(firmware);
- 			goto error_fw_load;
- 		}
- 
- 		/* Load the firmware into BHIE vec table */
--		mhi_firmware_copy(mhi_cntrl, firmware, mhi_cntrl->fbc_image);
-+		mhi_firmware_copy(mhi_cntrl, fw_data, fw_sz, mhi_cntrl->fbc_image);
- 	}
- 
- 	release_firmware(firmware);
---- a/include/linux/mhi.h
-+++ b/include/linux/mhi.h
-@@ -301,6 +301,10 @@ struct mhi_controller_config {
-  * @iova_start: IOMMU starting address for data (required)
-  * @iova_stop: IOMMU stop address for data (required)
-  * @fw_image: Firmware image name for normal booting (optional)
-+ * @fw_data: Firmware image data content for normal booting, used only
-+ *           if fw_image is NULL and fbc_download is true (optional)
-+ * @fw_sz: Firmware image data size for normal booting, used only if fw_image
-+ *         is NULL and fbc_download is true (optional)
-  * @edl_image: Firmware image name for emergency download mode (optional)
-  * @rddm_size: RAM dump size that host should allocate for debugging purpose
-  * @sbl_size: SBL image size downloaded through BHIe (optional)
-@@ -387,6 +391,8 @@ struct mhi_controller {
- 	dma_addr_t iova_start;
- 	dma_addr_t iova_stop;
- 	const char *fw_image;
-+	const u8 *fw_data;
-+	size_t fw_sz;
- 	const char *edl_image;
- 	size_t rddm_size;
- 	size_t sbl_size;
diff --git a/target/linux/generic/backport-6.1/880-v6.3-mfd-axp20x-Fix-order-of-pek-rise-and-fall-events.patch b/target/linux/generic/backport-6.1/880-v6.3-mfd-axp20x-Fix-order-of-pek-rise-and-fall-events.patch
deleted file mode 100644
index 23681ba93747..000000000000
--- a/target/linux/generic/backport-6.1/880-v6.3-mfd-axp20x-Fix-order-of-pek-rise-and-fall-events.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 8781ba7f45695af3ab8e8d1b55a31f527c9201a3 Mon Sep 17 00:00:00 2001
-From: Aren Moynihan <aren@peacevolution.org>
-Date: Thu, 8 Dec 2022 17:02:26 -0500
-Subject: [PATCH] mfd: axp20x: Fix order of pek rise and fall events
-
-The power button can get "stuck" if the rising edge and falling edge irq
-are read in the same pass. This can often be triggered when resuming
-from suspend if the power button is released before the kernel handles
-the interrupt.
-
-Swapping the order of the rise and fall events makes sure that the press
-event is handled first, which prevents this situation.
-
-Signed-off-by: Aren Moynihan <aren@peacevolution.org>
-Reviewed-by: Samuel Holland <samuel@sholland.org>
-Tested-by: Samuel Holland <samuel@sholland.org>
-Acked-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/20221208220225.635414-1-aren@peacevolution.org
----
- include/linux/mfd/axp20x.h | 15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/include/linux/mfd/axp20x.h
-+++ b/include/linux/mfd/axp20x.h
-@@ -432,8 +432,9 @@ enum {
- 	AXP152_IRQ_PEK_SHORT,
- 	AXP152_IRQ_PEK_LONG,
- 	AXP152_IRQ_TIMER,
--	AXP152_IRQ_PEK_RIS_EDGE,
-+	/* out of bit order to make sure the press event is handled first */
- 	AXP152_IRQ_PEK_FAL_EDGE,
-+	AXP152_IRQ_PEK_RIS_EDGE,
- 	AXP152_IRQ_GPIO3_INPUT,
- 	AXP152_IRQ_GPIO2_INPUT,
- 	AXP152_IRQ_GPIO1_INPUT,
-@@ -472,8 +473,9 @@ enum {
- 	AXP20X_IRQ_LOW_PWR_LVL1,
- 	AXP20X_IRQ_LOW_PWR_LVL2,
- 	AXP20X_IRQ_TIMER,
--	AXP20X_IRQ_PEK_RIS_EDGE,
-+	/* out of bit order to make sure the press event is handled first */
- 	AXP20X_IRQ_PEK_FAL_EDGE,
-+	AXP20X_IRQ_PEK_RIS_EDGE,
- 	AXP20X_IRQ_GPIO3_INPUT,
- 	AXP20X_IRQ_GPIO2_INPUT,
- 	AXP20X_IRQ_GPIO1_INPUT,
-@@ -502,8 +504,9 @@ enum axp22x_irqs {
- 	AXP22X_IRQ_LOW_PWR_LVL1,
- 	AXP22X_IRQ_LOW_PWR_LVL2,
- 	AXP22X_IRQ_TIMER,
--	AXP22X_IRQ_PEK_RIS_EDGE,
-+	/* out of bit order to make sure the press event is handled first */
- 	AXP22X_IRQ_PEK_FAL_EDGE,
-+	AXP22X_IRQ_PEK_RIS_EDGE,
- 	AXP22X_IRQ_GPIO1_INPUT,
- 	AXP22X_IRQ_GPIO0_INPUT,
- };
-@@ -571,8 +574,9 @@ enum axp803_irqs {
- 	AXP803_IRQ_LOW_PWR_LVL1,
- 	AXP803_IRQ_LOW_PWR_LVL2,
- 	AXP803_IRQ_TIMER,
--	AXP803_IRQ_PEK_RIS_EDGE,
-+	/* out of bit order to make sure the press event is handled first */
- 	AXP803_IRQ_PEK_FAL_EDGE,
-+	AXP803_IRQ_PEK_RIS_EDGE,
- 	AXP803_IRQ_PEK_SHORT,
- 	AXP803_IRQ_PEK_LONG,
- 	AXP803_IRQ_PEK_OVER_OFF,
-@@ -623,8 +627,9 @@ enum axp809_irqs {
- 	AXP809_IRQ_LOW_PWR_LVL1,
- 	AXP809_IRQ_LOW_PWR_LVL2,
- 	AXP809_IRQ_TIMER,
--	AXP809_IRQ_PEK_RIS_EDGE,
-+	/* out of bit order to make sure the press event is handled first */
- 	AXP809_IRQ_PEK_FAL_EDGE,
-+	AXP809_IRQ_PEK_RIS_EDGE,
- 	AXP809_IRQ_PEK_SHORT,
- 	AXP809_IRQ_PEK_LONG,
- 	AXP809_IRQ_PEK_OVER_OFF,
diff --git a/target/linux/generic/backport-6.1/881-v6.3-mfd-axp20x-Switch-to-the-sys-off-handler-API.patch b/target/linux/generic/backport-6.1/881-v6.3-mfd-axp20x-Switch-to-the-sys-off-handler-API.patch
deleted file mode 100644
index b742276c8ad4..000000000000
--- a/target/linux/generic/backport-6.1/881-v6.3-mfd-axp20x-Switch-to-the-sys-off-handler-API.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 1b1305e95e85624f538ec56db9acf88e2d3d7397 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Wed, 28 Dec 2022 10:27:52 -0600
-Subject: [PATCH] mfd: axp20x: Switch to the sys-off handler API
-
-This removes a layer of indirection through pm_power_off() and allows
-the PMIC handler to be used as a fallback when firmware power off fails.
-This happens on boards like the Clockwork DevTerm R-01 where OpenSBI
-does not know how to use the PMIC to power off the board.
-
-Move the check for AXP288 to avoid registering a dummy handler.
-
-Signed-off-by: Samuel Holland <samuel@sholland.org>
-[Lee: Removed superfluous new line]
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/20221228162752.14204-1-samuel@sholland.org
----
- drivers/mfd/axp20x.c | 27 +++++++++++----------------
- 1 file changed, 11 insertions(+), 16 deletions(-)
-
---- a/drivers/mfd/axp20x.c
-+++ b/drivers/mfd/axp20x.c
-@@ -23,7 +23,7 @@
- #include <linux/mfd/core.h>
- #include <linux/module.h>
- #include <linux/of_device.h>
--#include <linux/pm_runtime.h>
-+#include <linux/reboot.h>
- #include <linux/regmap.h>
- #include <linux/regulator/consumer.h>
- 
-@@ -832,17 +832,16 @@ static const struct mfd_cell axp813_cell
- 	},
- };
- 
--static struct axp20x_dev *axp20x_pm_power_off;
--static void axp20x_power_off(void)
-+static int axp20x_power_off(struct sys_off_data *data)
- {
--	if (axp20x_pm_power_off->variant == AXP288_ID)
--		return;
-+	struct axp20x_dev *axp20x = data->cb_data;
- 
--	regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
--		     AXP20X_OFF);
-+	regmap_write(axp20x->regmap, AXP20X_OFF_CTRL, AXP20X_OFF);
- 
- 	/* Give capacitors etc. time to drain to avoid kernel panic msg. */
- 	mdelay(500);
-+
-+	return NOTIFY_DONE;
- }
- 
- int axp20x_match_device(struct axp20x_dev *axp20x)
-@@ -1009,10 +1008,11 @@ int axp20x_device_probe(struct axp20x_de
- 		return ret;
- 	}
- 
--	if (!pm_power_off) {
--		axp20x_pm_power_off = axp20x;
--		pm_power_off = axp20x_power_off;
--	}
-+	if (axp20x->variant != AXP288_ID)
-+		devm_register_sys_off_handler(axp20x->dev,
-+					      SYS_OFF_MODE_POWER_OFF,
-+					      SYS_OFF_PRIO_DEFAULT,
-+					      axp20x_power_off, axp20x);
- 
- 	dev_info(axp20x->dev, "AXP20X driver loaded\n");
- 
-@@ -1022,11 +1022,6 @@ EXPORT_SYMBOL(axp20x_device_probe);
- 
- void axp20x_device_remove(struct axp20x_dev *axp20x)
- {
--	if (axp20x == axp20x_pm_power_off) {
--		axp20x_pm_power_off = NULL;
--		pm_power_off = NULL;
--	}
--
- 	mfd_remove_devices(axp20x->dev);
- 	regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc);
- }
diff --git a/target/linux/generic/backport-6.1/882-v6.3-mfd-axp20x-Fix-axp288-writable-ranges.patch b/target/linux/generic/backport-6.1/882-v6.3-mfd-axp20x-Fix-axp288-writable-ranges.patch
deleted file mode 100644
index b84815e1a854..000000000000
--- a/target/linux/generic/backport-6.1/882-v6.3-mfd-axp20x-Fix-axp288-writable-ranges.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 2405fbfb384ef39e9560d76d3f6e4c90519f90aa Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 29 Mar 2023 22:55:44 +0200
-Subject: [PATCH] mfd: axp20x: Fix axp288 writable-ranges
-
-Register AXP288_POWER_REASON is writable and needs to be written
-to reset the reset- / power-on-reason bits.
-
-Add it to the axp288 writable-ranges so that the extcon-axp288
-driver can properly clear the reset- / power-on-reason bits.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/20230329205544.1051393-1-hdegoede@redhat.com
----
- drivers/mfd/axp20x.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mfd/axp20x.c
-+++ b/drivers/mfd/axp20x.c
-@@ -119,6 +119,7 @@ static const struct regmap_access_table
- 
- /* AXP288 ranges are shared with the AXP803, as they cover the same range */
- static const struct regmap_range axp288_writeable_ranges[] = {
-+	regmap_reg_range(AXP288_POWER_REASON, AXP288_POWER_REASON),
- 	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
- 	regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
- };
diff --git a/target/linux/generic/backport-6.1/883-v6.4-mfd-axp20x-Add-support-for-AXP15060-PMIC.patch b/target/linux/generic/backport-6.1/883-v6.4-mfd-axp20x-Add-support-for-AXP15060-PMIC.patch
deleted file mode 100644
index 83ef60aecd7c..000000000000
--- a/target/linux/generic/backport-6.1/883-v6.4-mfd-axp20x-Add-support-for-AXP15060-PMIC.patch
+++ /dev/null
@@ -1,343 +0,0 @@
-From e0f8ad2a705367518b5c56bf9d6da89681467c02 Mon Sep 17 00:00:00 2001
-From: Shengyu Qu <wiagn233@outlook.com>
-Date: Fri, 21 Apr 2023 23:08:15 +0800
-Subject: [PATCH] mfd: axp20x: Add support for AXP15060 PMIC
-
-The AXP15060 is a PMIC chip produced by X-Powers, and could be connected
-via an I2C bus.
-
-Describe the regmap and the MFD bits, along with the registers exposed
-via I2C. Eventually advertise the device using a new compatible string
-and add support for power off the system.
-
-The driver would disable PEK function if IRQ is not configured in device
-tree, since some boards (For example, Starfive Visionfive 2) didn't
-connect IRQ line of PMIC to SOC.
-
-GPIO function isn't enabled in this commit, since its configuration
-operation is different from any existing AXP PMICs and needs
-logic modification on existing driver. GPIO support might come in later
-patches.
-
-Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
-Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Lee Jones <lee@kernel.org>
-Link: https://lore.kernel.org/r/TY3P286MB261162D57695AC8164ED50E298609@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM
----
- drivers/mfd/axp20x-i2c.c   |   2 +
- drivers/mfd/axp20x.c       | 107 +++++++++++++++++++++++++++++++++++++
- include/linux/mfd/axp20x.h |  85 +++++++++++++++++++++++++++++
- 3 files changed, 194 insertions(+)
-
---- a/drivers/mfd/axp20x-i2c.c
-+++ b/drivers/mfd/axp20x-i2c.c
-@@ -66,6 +66,7 @@ static const struct of_device_id axp20x_
- 	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
- 	{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
- 	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
-+	{ .compatible = "x-powers,axp15060", .data = (void *)AXP15060_ID },
- 	{ },
- };
- MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
-@@ -79,6 +80,7 @@ static const struct i2c_device_id axp20x
- 	{ "axp223", 0 },
- 	{ "axp803", 0 },
- 	{ "axp806", 0 },
-+	{ "axp15060", 0 },
- 	{ },
- };
- MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
---- a/drivers/mfd/axp20x.c
-+++ b/drivers/mfd/axp20x.c
-@@ -43,6 +43,7 @@ static const char * const axp20x_model_n
- 	"AXP806",
- 	"AXP809",
- 	"AXP813",
-+	"AXP15060",
- };
- 
- static const struct regmap_range axp152_writeable_ranges[] = {
-@@ -169,6 +170,31 @@ static const struct regmap_access_table
- 	.n_yes_ranges	= ARRAY_SIZE(axp806_volatile_ranges),
- };
- 
-+static const struct regmap_range axp15060_writeable_ranges[] = {
-+	regmap_reg_range(AXP15060_PWR_OUT_CTRL1, AXP15060_DCDC_MODE_CTRL2),
-+	regmap_reg_range(AXP15060_OUTPUT_MONITOR_DISCHARGE, AXP15060_CPUSLDO_V_CTRL),
-+	regmap_reg_range(AXP15060_PWR_WAKEUP_CTRL, AXP15060_PWR_DISABLE_DOWN_SEQ),
-+	regmap_reg_range(AXP15060_PEK_KEY, AXP15060_PEK_KEY),
-+	regmap_reg_range(AXP15060_IRQ1_EN, AXP15060_IRQ2_EN),
-+	regmap_reg_range(AXP15060_IRQ1_STATE, AXP15060_IRQ2_STATE),
-+};
-+
-+static const struct regmap_range axp15060_volatile_ranges[] = {
-+	regmap_reg_range(AXP15060_STARTUP_SRC, AXP15060_STARTUP_SRC),
-+	regmap_reg_range(AXP15060_PWR_WAKEUP_CTRL, AXP15060_PWR_DISABLE_DOWN_SEQ),
-+	regmap_reg_range(AXP15060_IRQ1_STATE, AXP15060_IRQ2_STATE),
-+};
-+
-+static const struct regmap_access_table axp15060_writeable_table = {
-+	.yes_ranges	= axp15060_writeable_ranges,
-+	.n_yes_ranges	= ARRAY_SIZE(axp15060_writeable_ranges),
-+};
-+
-+static const struct regmap_access_table axp15060_volatile_table = {
-+	.yes_ranges	= axp15060_volatile_ranges,
-+	.n_yes_ranges	= ARRAY_SIZE(axp15060_volatile_ranges),
-+};
-+
- static const struct resource axp152_pek_resources[] = {
- 	DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
- 	DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
-@@ -237,6 +263,11 @@ static const struct resource axp809_pek_
- 	DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
- };
- 
-+static const struct resource axp15060_pek_resources[] = {
-+	DEFINE_RES_IRQ_NAMED(AXP15060_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
-+	DEFINE_RES_IRQ_NAMED(AXP15060_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
-+};
-+
- static const struct regmap_config axp152_regmap_config = {
- 	.reg_bits	= 8,
- 	.val_bits	= 8,
-@@ -282,6 +313,15 @@ static const struct regmap_config axp806
- 	.cache_type	= REGCACHE_RBTREE,
- };
- 
-+static const struct regmap_config axp15060_regmap_config = {
-+	.reg_bits	= 8,
-+	.val_bits	= 8,
-+	.wr_table	= &axp15060_writeable_table,
-+	.volatile_table	= &axp15060_volatile_table,
-+	.max_register	= AXP15060_IRQ2_STATE,
-+	.cache_type	= REGCACHE_RBTREE,
-+};
-+
- #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask)			\
- 	[_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
- 
-@@ -503,6 +543,23 @@ static const struct regmap_irq axp809_re
- 	INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT,		4, 0),
- };
- 
-+static const struct regmap_irq axp15060_regmap_irqs[] = {
-+	INIT_REGMAP_IRQ(AXP15060, DIE_TEMP_HIGH_LV1,	0, 0),
-+	INIT_REGMAP_IRQ(AXP15060, DIE_TEMP_HIGH_LV2,	0, 1),
-+	INIT_REGMAP_IRQ(AXP15060, DCDC1_V_LOW,		0, 2),
-+	INIT_REGMAP_IRQ(AXP15060, DCDC2_V_LOW,		0, 3),
-+	INIT_REGMAP_IRQ(AXP15060, DCDC3_V_LOW,		0, 4),
-+	INIT_REGMAP_IRQ(AXP15060, DCDC4_V_LOW,		0, 5),
-+	INIT_REGMAP_IRQ(AXP15060, DCDC5_V_LOW,		0, 6),
-+	INIT_REGMAP_IRQ(AXP15060, DCDC6_V_LOW,		0, 7),
-+	INIT_REGMAP_IRQ(AXP15060, PEK_LONG,			1, 0),
-+	INIT_REGMAP_IRQ(AXP15060, PEK_SHORT,			1, 1),
-+	INIT_REGMAP_IRQ(AXP15060, GPIO1_INPUT,		1, 2),
-+	INIT_REGMAP_IRQ(AXP15060, PEK_FAL_EDGE,			1, 3),
-+	INIT_REGMAP_IRQ(AXP15060, PEK_RIS_EDGE,			1, 4),
-+	INIT_REGMAP_IRQ(AXP15060, GPIO2_INPUT,		1, 5),
-+};
-+
- static const struct regmap_irq_chip axp152_regmap_irq_chip = {
- 	.name			= "axp152_irq_chip",
- 	.status_base		= AXP152_IRQ1_STATE,
-@@ -589,6 +646,17 @@ static const struct regmap_irq_chip axp8
- 	.num_regs		= 5,
- };
- 
-+static const struct regmap_irq_chip axp15060_regmap_irq_chip = {
-+	.name			= "axp15060",
-+	.status_base		= AXP15060_IRQ1_STATE,
-+	.ack_base		= AXP15060_IRQ1_STATE,
-+	.unmask_base		= AXP15060_IRQ1_EN,
-+	.init_ack_masked	= true,
-+	.irqs			= axp15060_regmap_irqs,
-+	.num_irqs		= ARRAY_SIZE(axp15060_regmap_irqs),
-+	.num_regs		= 2,
-+};
-+
- static const struct mfd_cell axp20x_cells[] = {
- 	{
- 		.name		= "axp20x-gpio",
-@@ -833,6 +901,23 @@ static const struct mfd_cell axp813_cell
- 	},
- };
- 
-+static const struct mfd_cell axp15060_cells[] = {
-+	{
-+		.name		= "axp221-pek",
-+		.num_resources	= ARRAY_SIZE(axp15060_pek_resources),
-+		.resources	= axp15060_pek_resources,
-+	}, {
-+		.name		= "axp20x-regulator",
-+	},
-+};
-+
-+/* For boards that don't have IRQ line connected to SOC. */
-+static const struct mfd_cell axp_regulator_only_cells[] = {
-+	{
-+		.name		= "axp20x-regulator",
-+	},
-+};
-+
- static int axp20x_power_off(struct sys_off_data *data)
- {
- 	struct axp20x_dev *axp20x = data->cb_data;
-@@ -942,6 +1027,28 @@ int axp20x_match_device(struct axp20x_de
- 		 */
- 		axp20x->regmap_irq_chip = &axp803_regmap_irq_chip;
- 		break;
-+	case AXP15060_ID:
-+		/*
-+		 * Don't register the power key part if there is no interrupt
-+		 * line.
-+		 *
-+		 * Since most use cases of AXP PMICs are Allwinner SOCs, board
-+		 * designers follow Allwinner's reference design and connects
-+		 * IRQ line to SOC, there's no need for those variants to deal
-+		 * with cases that IRQ isn't connected. However, AXP15660 is
-+		 * used by some other vendors' SOCs that didn't connect IRQ
-+		 * line, we need to deal with this case.
-+		 */
-+		if (axp20x->irq > 0) {
-+			axp20x->nr_cells = ARRAY_SIZE(axp15060_cells);
-+			axp20x->cells = axp15060_cells;
-+		} else {
-+			axp20x->nr_cells = ARRAY_SIZE(axp_regulator_only_cells);
-+			axp20x->cells = axp_regulator_only_cells;
-+		}
-+		axp20x->regmap_cfg = &axp15060_regmap_config;
-+		axp20x->regmap_irq_chip = &axp15060_regmap_irq_chip;
-+		break;
- 	default:
- 		dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
- 		return -EINVAL;
---- a/include/linux/mfd/axp20x.h
-+++ b/include/linux/mfd/axp20x.h
-@@ -21,6 +21,7 @@ enum axp20x_variants {
- 	AXP806_ID,
- 	AXP809_ID,
- 	AXP813_ID,
-+	AXP15060_ID,
- 	NR_AXP20X_VARIANTS,
- };
- 
-@@ -131,6 +132,39 @@ enum axp20x_variants {
- /* Other DCDC regulator control registers are the same as AXP803 */
- #define AXP813_DCDC7_V_OUT		0x26
- 
-+#define AXP15060_STARTUP_SRC		0x00
-+#define AXP15060_PWR_OUT_CTRL1		0x10
-+#define AXP15060_PWR_OUT_CTRL2		0x11
-+#define AXP15060_PWR_OUT_CTRL3		0x12
-+#define AXP15060_DCDC1_V_CTRL		0x13
-+#define AXP15060_DCDC2_V_CTRL		0x14
-+#define AXP15060_DCDC3_V_CTRL		0x15
-+#define AXP15060_DCDC4_V_CTRL		0x16
-+#define AXP15060_DCDC5_V_CTRL		0x17
-+#define AXP15060_DCDC6_V_CTRL		0x18
-+#define AXP15060_ALDO1_V_CTRL		0x19
-+#define AXP15060_DCDC_MODE_CTRL1		0x1a
-+#define AXP15060_DCDC_MODE_CTRL2		0x1b
-+#define AXP15060_OUTPUT_MONITOR_DISCHARGE		0x1e
-+#define AXP15060_IRQ_PWROK_VOFF		0x1f
-+#define AXP15060_ALDO2_V_CTRL		0x20
-+#define AXP15060_ALDO3_V_CTRL		0x21
-+#define AXP15060_ALDO4_V_CTRL		0x22
-+#define AXP15060_ALDO5_V_CTRL		0x23
-+#define AXP15060_BLDO1_V_CTRL		0x24
-+#define AXP15060_BLDO2_V_CTRL		0x25
-+#define AXP15060_BLDO3_V_CTRL		0x26
-+#define AXP15060_BLDO4_V_CTRL		0x27
-+#define AXP15060_BLDO5_V_CTRL		0x28
-+#define AXP15060_CLDO1_V_CTRL		0x29
-+#define AXP15060_CLDO2_V_CTRL		0x2a
-+#define AXP15060_CLDO3_V_CTRL		0x2b
-+#define AXP15060_CLDO4_V_CTRL		0x2d
-+#define AXP15060_CPUSLDO_V_CTRL		0x2e
-+#define AXP15060_PWR_WAKEUP_CTRL		0x31
-+#define AXP15060_PWR_DISABLE_DOWN_SEQ		0x32
-+#define AXP15060_PEK_KEY		0x36
-+
- /* Interrupt */
- #define AXP152_IRQ1_EN			0x40
- #define AXP152_IRQ2_EN			0x41
-@@ -152,6 +186,11 @@ enum axp20x_variants {
- #define AXP20X_IRQ5_STATE		0x4c
- #define AXP20X_IRQ6_STATE		0x4d
- 
-+#define AXP15060_IRQ1_EN		0x40
-+#define AXP15060_IRQ2_EN		0x41
-+#define AXP15060_IRQ1_STATE		0x48
-+#define AXP15060_IRQ2_STATE		0x49
-+
- /* ADC */
- #define AXP20X_ACIN_V_ADC_H		0x56
- #define AXP20X_ACIN_V_ADC_L		0x57
-@@ -222,6 +261,8 @@ enum axp20x_variants {
- #define AXP22X_GPIO_STATE		0x94
- #define AXP22X_GPIO_PULL_DOWN		0x95
- 
-+#define AXP15060_CLDO4_GPIO2_MODESET		0x2c
-+
- /* Battery */
- #define AXP20X_CHRG_CC_31_24		0xb0
- #define AXP20X_CHRG_CC_23_16		0xb1
-@@ -419,6 +460,33 @@ enum {
- 	AXP813_REG_ID_MAX,
- };
- 
-+enum {
-+	AXP15060_DCDC1 = 0,
-+	AXP15060_DCDC2,
-+	AXP15060_DCDC3,
-+	AXP15060_DCDC4,
-+	AXP15060_DCDC5,
-+	AXP15060_DCDC6,
-+	AXP15060_ALDO1,
-+	AXP15060_ALDO2,
-+	AXP15060_ALDO3,
-+	AXP15060_ALDO4,
-+	AXP15060_ALDO5,
-+	AXP15060_BLDO1,
-+	AXP15060_BLDO2,
-+	AXP15060_BLDO3,
-+	AXP15060_BLDO4,
-+	AXP15060_BLDO5,
-+	AXP15060_CLDO1,
-+	AXP15060_CLDO2,
-+	AXP15060_CLDO3,
-+	AXP15060_CLDO4,
-+	AXP15060_CPUSLDO,
-+	AXP15060_SW,
-+	AXP15060_RTC_LDO,
-+	AXP15060_REG_ID_MAX,
-+};
-+
- /* IRQs */
- enum {
- 	AXP152_IRQ_LDO0IN_CONNECT = 1,
-@@ -637,6 +705,23 @@ enum axp809_irqs {
- 	AXP809_IRQ_GPIO0_INPUT,
- };
- 
-+enum axp15060_irqs {
-+	AXP15060_IRQ_DIE_TEMP_HIGH_LV1 = 1,
-+	AXP15060_IRQ_DIE_TEMP_HIGH_LV2,
-+	AXP15060_IRQ_DCDC1_V_LOW,
-+	AXP15060_IRQ_DCDC2_V_LOW,
-+	AXP15060_IRQ_DCDC3_V_LOW,
-+	AXP15060_IRQ_DCDC4_V_LOW,
-+	AXP15060_IRQ_DCDC5_V_LOW,
-+	AXP15060_IRQ_DCDC6_V_LOW,
-+	AXP15060_IRQ_PEK_LONG,
-+	AXP15060_IRQ_PEK_SHORT,
-+	AXP15060_IRQ_GPIO1_INPUT,
-+	AXP15060_IRQ_PEK_FAL_EDGE,
-+	AXP15060_IRQ_PEK_RIS_EDGE,
-+	AXP15060_IRQ_GPIO2_INPUT,
-+};
-+
- struct axp20x_dev {
- 	struct device			*dev;
- 	int				irq;
diff --git a/target/linux/generic/backport-6.1/884-v6.5-mfd-axp20x-Add-support-for-AXP313a-PMIC.patch b/target/linux/generic/backport-6.1/884-v6.5-mfd-axp20x-Add-support-for-AXP313a-PMIC.patch
deleted file mode 100644
index c9470eacec73..000000000000
--- a/target/linux/generic/backport-6.1/884-v6.5-mfd-axp20x-Add-support-for-AXP313a-PMIC.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-From 75c8cb2f4cb218aaf4ea68cab08d6dbc96eeae15 Mon Sep 17 00:00:00 2001
-From: Martin Botka <martin.botka@somainline.org>
-Date: Wed, 24 May 2023 01:00:10 +0100
-Subject: [PATCH] mfd: axp20x: Add support for AXP313a PMIC
-
-The AXP313a is a PMIC chip produced by X-Powers, it can be connected via
-an I2C bus.
-The name AXP1530 seems to appear as well, and this is what is used in
-the BSP driver. From all we know it's the same chip, just a different
-name. However we have only seen AXP313a chips in the wild, so go with
-this name.
-
-Compared to the other AXP PMICs it's a rather simple affair: just three
-DCDC converters, three LDOs, and no battery charging support.
-
-Describe the regmap and the MFD bits, along with the registers exposed
-via I2C. Aside from the various regulators, also describe the power key
-interrupts, and adjust the shutdown handler routine to use a different
-register than the other PMICs.
-Eventually advertise the device using the new compatible string.
-
-Signed-off-by: Martin Botka <martin.botka@somainline.org>
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Reviewed-by: Chen-Yu Tsai <wens@csie.org>
-Link: https://lore.kernel.org/r/20230524000012.15028-2-andre.przywara@arm.com
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/mfd/axp20x-i2c.c   |  2 +
- drivers/mfd/axp20x.c       | 78 +++++++++++++++++++++++++++++++++++++-
- include/linux/mfd/axp20x.h | 32 ++++++++++++++++
- 3 files changed, 111 insertions(+), 1 deletion(-)
-
---- a/drivers/mfd/axp20x-i2c.c
-+++ b/drivers/mfd/axp20x-i2c.c
-@@ -64,6 +64,7 @@ static const struct of_device_id axp20x_
- 	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
- 	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
- 	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
-+	{ .compatible = "x-powers,axp313a", .data = (void *)AXP313A_ID },
- 	{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
- 	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
- 	{ .compatible = "x-powers,axp15060", .data = (void *)AXP15060_ID },
-@@ -78,6 +79,7 @@ static const struct i2c_device_id axp20x
- 	{ "axp209", 0 },
- 	{ "axp221", 0 },
- 	{ "axp223", 0 },
-+	{ "axp313a", 0 },
- 	{ "axp803", 0 },
- 	{ "axp806", 0 },
- 	{ "axp15060", 0 },
---- a/drivers/mfd/axp20x.c
-+++ b/drivers/mfd/axp20x.c
-@@ -39,6 +39,7 @@ static const char * const axp20x_model_n
- 	"AXP221",
- 	"AXP223",
- 	"AXP288",
-+	"AXP313a",
- 	"AXP803",
- 	"AXP806",
- 	"AXP809",
-@@ -156,6 +157,25 @@ static const struct regmap_range axp806_
- 	regmap_reg_range(AXP806_REG_ADDR_EXT, AXP806_REG_ADDR_EXT),
- };
- 
-+static const struct regmap_range axp313a_writeable_ranges[] = {
-+	regmap_reg_range(AXP313A_ON_INDICATE, AXP313A_IRQ_STATE),
-+};
-+
-+static const struct regmap_range axp313a_volatile_ranges[] = {
-+	regmap_reg_range(AXP313A_SHUTDOWN_CTRL, AXP313A_SHUTDOWN_CTRL),
-+	regmap_reg_range(AXP313A_IRQ_STATE, AXP313A_IRQ_STATE),
-+};
-+
-+static const struct regmap_access_table axp313a_writeable_table = {
-+	.yes_ranges = axp313a_writeable_ranges,
-+	.n_yes_ranges = ARRAY_SIZE(axp313a_writeable_ranges),
-+};
-+
-+static const struct regmap_access_table axp313a_volatile_table = {
-+	.yes_ranges = axp313a_volatile_ranges,
-+	.n_yes_ranges = ARRAY_SIZE(axp313a_volatile_ranges),
-+};
-+
- static const struct regmap_range axp806_volatile_ranges[] = {
- 	regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE),
- };
-@@ -248,6 +268,11 @@ static const struct resource axp288_fuel
- 	DEFINE_RES_IRQ(AXP288_IRQ_WL1),
- };
- 
-+static const struct resource axp313a_pek_resources[] = {
-+	DEFINE_RES_IRQ_NAMED(AXP313A_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
-+	DEFINE_RES_IRQ_NAMED(AXP313A_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
-+};
-+
- static const struct resource axp803_pek_resources[] = {
- 	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
- 	DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
-@@ -304,6 +329,15 @@ static const struct regmap_config axp288
- 	.cache_type	= REGCACHE_RBTREE,
- };
- 
-+static const struct regmap_config axp313a_regmap_config = {
-+	.reg_bits = 8,
-+	.val_bits = 8,
-+	.wr_table = &axp313a_writeable_table,
-+	.volatile_table = &axp313a_volatile_table,
-+	.max_register = AXP313A_IRQ_STATE,
-+	.cache_type = REGCACHE_RBTREE,
-+};
-+
- static const struct regmap_config axp806_regmap_config = {
- 	.reg_bits	= 8,
- 	.val_bits	= 8,
-@@ -456,6 +490,16 @@ static const struct regmap_irq axp288_re
- 	INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG,            5, 1),
- };
- 
-+static const struct regmap_irq axp313a_regmap_irqs[] = {
-+	INIT_REGMAP_IRQ(AXP313A, PEK_RIS_EDGE,		0, 7),
-+	INIT_REGMAP_IRQ(AXP313A, PEK_FAL_EDGE,		0, 6),
-+	INIT_REGMAP_IRQ(AXP313A, PEK_SHORT,		0, 5),
-+	INIT_REGMAP_IRQ(AXP313A, PEK_LONG,		0, 4),
-+	INIT_REGMAP_IRQ(AXP313A, DCDC3_V_LOW,		0, 3),
-+	INIT_REGMAP_IRQ(AXP313A, DCDC2_V_LOW,		0, 2),
-+	INIT_REGMAP_IRQ(AXP313A, DIE_TEMP_HIGH,		0, 0),
-+};
-+
- static const struct regmap_irq axp803_regmap_irqs[] = {
- 	INIT_REGMAP_IRQ(AXP803, ACIN_OVER_V,		0, 7),
- 	INIT_REGMAP_IRQ(AXP803, ACIN_PLUGIN,		0, 6),
-@@ -610,6 +654,17 @@ static const struct regmap_irq_chip axp2
- 
- };
- 
-+static const struct regmap_irq_chip axp313a_regmap_irq_chip = {
-+	.name			= "axp313a_irq_chip",
-+	.status_base		= AXP313A_IRQ_STATE,
-+	.ack_base		= AXP313A_IRQ_STATE,
-+	.unmask_base		= AXP313A_IRQ_EN,
-+	.init_ack_masked	= true,
-+	.irqs			= axp313a_regmap_irqs,
-+	.num_irqs		= ARRAY_SIZE(axp313a_regmap_irqs),
-+	.num_regs		= 1,
-+};
-+
- static const struct regmap_irq_chip axp803_regmap_irq_chip = {
- 	.name			= "axp803",
- 	.status_base		= AXP20X_IRQ1_STATE,
-@@ -752,6 +807,11 @@ static const struct mfd_cell axp152_cell
- 	},
- };
- 
-+static struct mfd_cell axp313a_cells[] = {
-+	MFD_CELL_NAME("axp20x-regulator"),
-+	MFD_CELL_RES("axp313a-pek", axp313a_pek_resources),
-+};
-+
- static const struct resource axp288_adc_resources[] = {
- 	DEFINE_RES_IRQ_NAMED(AXP288_IRQ_GPADC, "GPADC"),
- };
-@@ -921,8 +981,18 @@ static const struct mfd_cell axp_regulat
- static int axp20x_power_off(struct sys_off_data *data)
- {
- 	struct axp20x_dev *axp20x = data->cb_data;
-+	unsigned int shutdown_reg;
- 
--	regmap_write(axp20x->regmap, AXP20X_OFF_CTRL, AXP20X_OFF);
-+	switch (axp20x->variant) {
-+	case AXP313A_ID:
-+		shutdown_reg = AXP313A_SHUTDOWN_CTRL;
-+		break;
-+	default:
-+		shutdown_reg = AXP20X_OFF_CTRL;
-+		break;
-+	}
-+
-+	regmap_write(axp20x->regmap, shutdown_reg, AXP20X_OFF);
- 
- 	/* Give capacitors etc. time to drain to avoid kernel panic msg. */
- 	mdelay(500);
-@@ -985,6 +1055,12 @@ int axp20x_match_device(struct axp20x_de
- 		axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
- 		axp20x->irq_flags = IRQF_TRIGGER_LOW;
- 		break;
-+	case AXP313A_ID:
-+		axp20x->nr_cells = ARRAY_SIZE(axp313a_cells);
-+		axp20x->cells = axp313a_cells;
-+		axp20x->regmap_cfg = &axp313a_regmap_config;
-+		axp20x->regmap_irq_chip = &axp313a_regmap_irq_chip;
-+		break;
- 	case AXP803_ID:
- 		axp20x->nr_cells = ARRAY_SIZE(axp803_cells);
- 		axp20x->cells = axp803_cells;
---- a/include/linux/mfd/axp20x.h
-+++ b/include/linux/mfd/axp20x.h
-@@ -17,6 +17,7 @@ enum axp20x_variants {
- 	AXP221_ID,
- 	AXP223_ID,
- 	AXP288_ID,
-+	AXP313A_ID,
- 	AXP803_ID,
- 	AXP806_ID,
- 	AXP809_ID,
-@@ -92,6 +93,17 @@ enum axp20x_variants {
- #define AXP22X_ALDO3_V_OUT		0x2a
- #define AXP22X_CHRG_CTRL3		0x35
- 
-+#define AXP313A_ON_INDICATE		0x00
-+#define AXP313A_OUTPUT_CONTROL		0x10
-+#define AXP313A_DCDC1_CONRTOL		0x13
-+#define AXP313A_DCDC2_CONRTOL		0x14
-+#define AXP313A_DCDC3_CONRTOL		0x15
-+#define AXP313A_ALDO1_CONRTOL		0x16
-+#define AXP313A_DLDO1_CONRTOL		0x17
-+#define AXP313A_SHUTDOWN_CTRL		0x1a
-+#define AXP313A_IRQ_EN			0x20
-+#define AXP313A_IRQ_STATE		0x21
-+
- #define AXP806_STARTUP_SRC		0x00
- #define AXP806_CHIP_ID			0x03
- #define AXP806_PWR_OUT_CTRL1		0x10
-@@ -364,6 +376,16 @@ enum {
- };
- 
- enum {
-+	AXP313A_DCDC1 = 0,
-+	AXP313A_DCDC2,
-+	AXP313A_DCDC3,
-+	AXP313A_ALDO1,
-+	AXP313A_DLDO1,
-+	AXP313A_RTC_LDO,
-+	AXP313A_REG_ID_MAX,
-+};
-+
-+enum {
- 	AXP806_DCDCA = 0,
- 	AXP806_DCDCB,
- 	AXP806_DCDCC,
-@@ -616,6 +638,16 @@ enum axp288_irqs {
- 	AXP288_IRQ_BC_USB_CHNG,
- };
- 
-+enum axp313a_irqs {
-+	AXP313A_IRQ_DIE_TEMP_HIGH,
-+	AXP313A_IRQ_DCDC2_V_LOW = 2,
-+	AXP313A_IRQ_DCDC3_V_LOW,
-+	AXP313A_IRQ_PEK_LONG,
-+	AXP313A_IRQ_PEK_SHORT,
-+	AXP313A_IRQ_PEK_FAL_EDGE,
-+	AXP313A_IRQ_PEK_RIS_EDGE,
-+};
-+
- enum axp803_irqs {
- 	AXP803_IRQ_ACIN_OVER_V = 1,
- 	AXP803_IRQ_ACIN_PLUGIN,
diff --git a/target/linux/generic/backport-6.1/885-v6.5-regulator-axp20x-Add-support-for-AXP313a-variant.patch b/target/linux/generic/backport-6.1/885-v6.5-regulator-axp20x-Add-support-for-AXP313a-variant.patch
deleted file mode 100644
index 91f1b398244a..000000000000
--- a/target/linux/generic/backport-6.1/885-v6.5-regulator-axp20x-Add-support-for-AXP313a-variant.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 60fd7eb89670d2636ac3156881acbd103c6eba6a Mon Sep 17 00:00:00 2001
-From: Martin Botka <martin.botka@somainline.org>
-Date: Wed, 24 May 2023 01:00:11 +0100
-Subject: [PATCH] regulator: axp20x: Add support for AXP313a variant
-
-The AXP313a is your typical I2C controlled PMIC, although in a lighter
-fashion compared to the other X-Powers PMICs: it has only three DCDC
-rails, three LDOs, and no battery charging support.
-
-The AXP313a datasheet does not describe a register to change the DCDC
-switching frequency, and talks of it being fixed at 3 MHz. Check that
-the property allowing to change that frequency is absent from the DT,
-and bail out otherwise.
-
-The third LDO, RTCLDO, is fixed, and cannot even be turned on or off,
-programmatically. On top of that, its voltage is customisable (either
-1.8V or 3.3V), which we cannot describe easily using the existing
-regulator wrapper functions. This should be fixed properly, using
-regulator-{min,max}-microvolt in the DT, but this requires more changes
-to the code. As some other PMICs (AXP2xx, AXP803) seem to paper over the
-same problem as well, we follow suit here and pretend it's a fixed 1.8V
-regulator. A proper fix can follow later. The BSP code seems to ignore
-this regulator altogether.
-
-Describe the AXP313A's voltage settings and switch registers, how the
-voltages are encoded, and connect this to the MFD device via its
-regulator ID.
-
-Signed-off-by: Martin Botka <martin.botka@somainline.org>
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Reviewed-by: Chen-Yu Tsai <wens@csie.org>
-Reviewed-by: Mark Brown <broonie@kernel.org>
-Tested-by: Shengyu Qu <wiagn233@outlook.com>
-Link: https://lore.kernel.org/r/20230524000012.15028-3-andre.przywara@arm.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/axp20x-regulator.c | 60 ++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/drivers/regulator/axp20x-regulator.c
-+++ b/drivers/regulator/axp20x-regulator.c
-@@ -134,6 +134,11 @@
- #define AXP22X_PWR_OUT_DLDO4_MASK	BIT_MASK(6)
- #define AXP22X_PWR_OUT_ALDO3_MASK	BIT_MASK(7)
- 
-+#define AXP313A_DCDC1_NUM_VOLTAGES	107
-+#define AXP313A_DCDC23_NUM_VOLTAGES	88
-+#define AXP313A_DCDC_V_OUT_MASK		GENMASK(6, 0)
-+#define AXP313A_LDO_V_OUT_MASK		GENMASK(4, 0)
-+
- #define AXP803_PWR_OUT_DCDC1_MASK	BIT_MASK(0)
- #define AXP803_PWR_OUT_DCDC2_MASK	BIT_MASK(1)
- #define AXP803_PWR_OUT_DCDC3_MASK	BIT_MASK(2)
-@@ -638,6 +643,48 @@ static const struct regulator_desc axp22
- 	.ops		= &axp20x_ops_sw,
- };
- 
-+static const struct linear_range axp313a_dcdc1_ranges[] = {
-+	REGULATOR_LINEAR_RANGE(500000,   0,  70,  10000),
-+	REGULATOR_LINEAR_RANGE(1220000, 71,  87,  20000),
-+	REGULATOR_LINEAR_RANGE(1600000, 88, 106, 100000),
-+};
-+
-+static const struct linear_range axp313a_dcdc2_ranges[] = {
-+	REGULATOR_LINEAR_RANGE(500000,   0, 70, 10000),
-+	REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
-+};
-+
-+/*
-+ * This is deviating from the datasheet. The values here are taken from the
-+ * BSP driver and have been confirmed by measurements.
-+ */
-+static const struct linear_range axp313a_dcdc3_ranges[] = {
-+	REGULATOR_LINEAR_RANGE(500000,   0,  70, 10000),
-+	REGULATOR_LINEAR_RANGE(1220000, 71, 102, 20000),
-+};
-+
-+static const struct regulator_desc axp313a_regulators[] = {
-+	AXP_DESC_RANGES(AXP313A, DCDC1, "dcdc1", "vin1",
-+			axp313a_dcdc1_ranges, AXP313A_DCDC1_NUM_VOLTAGES,
-+			AXP313A_DCDC1_CONRTOL, AXP313A_DCDC_V_OUT_MASK,
-+			AXP313A_OUTPUT_CONTROL, BIT(0)),
-+	AXP_DESC_RANGES(AXP313A, DCDC2, "dcdc2", "vin2",
-+			axp313a_dcdc2_ranges, AXP313A_DCDC23_NUM_VOLTAGES,
-+			AXP313A_DCDC2_CONRTOL, AXP313A_DCDC_V_OUT_MASK,
-+			AXP313A_OUTPUT_CONTROL, BIT(1)),
-+	AXP_DESC_RANGES(AXP313A, DCDC3, "dcdc3", "vin3",
-+			axp313a_dcdc3_ranges, AXP313A_DCDC23_NUM_VOLTAGES,
-+			AXP313A_DCDC3_CONRTOL, AXP313A_DCDC_V_OUT_MASK,
-+			AXP313A_OUTPUT_CONTROL, BIT(2)),
-+	AXP_DESC(AXP313A, ALDO1, "aldo1", "vin1", 500, 3500, 100,
-+		 AXP313A_ALDO1_CONRTOL, AXP313A_LDO_V_OUT_MASK,
-+		 AXP313A_OUTPUT_CONTROL, BIT(3)),
-+	AXP_DESC(AXP313A, DLDO1, "dldo1", "vin1", 500, 3500, 100,
-+		 AXP313A_DLDO1_CONRTOL, AXP313A_LDO_V_OUT_MASK,
-+		 AXP313A_OUTPUT_CONTROL, BIT(4)),
-+	AXP_DESC_FIXED(AXP313A, RTC_LDO, "rtc-ldo", "vin1", 1800),
-+};
-+
- /* DCDC ranges shared with AXP813 */
- static const struct linear_range axp803_dcdc234_ranges[] = {
- 	REGULATOR_LINEAR_RANGE(500000,
-@@ -1040,6 +1087,15 @@ static int axp20x_set_dcdc_freq(struct p
- 		def = 3000;
- 		step = 150;
- 		break;
-+	case AXP313A_ID:
-+		/* The DCDC PWM frequency seems to be fixed to 3 MHz. */
-+		if (dcdcfreq != 0) {
-+			dev_err(&pdev->dev,
-+				"DCDC frequency on AXP313a is fixed to 3 MHz.\n");
-+			return -EINVAL;
-+		}
-+
-+		return 0;
- 	default:
- 		dev_err(&pdev->dev,
- 			"Setting DCDC frequency for unsupported AXP variant\n");
-@@ -1232,6 +1288,10 @@ static int axp20x_regulator_probe(struct
- 		drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
- 						  "x-powers,drive-vbus-en");
- 		break;
-+	case AXP313A_ID:
-+		regulators = axp313a_regulators;
-+		nregulators = AXP313A_REG_ID_MAX;
-+		break;
- 	case AXP803_ID:
- 		regulators = axp803_regulators;
- 		nregulators = AXP803_REG_ID_MAX;
diff --git a/target/linux/generic/backport-6.1/886-v6.5-regulator-axp20x-Add-AXP15060-support.patch b/target/linux/generic/backport-6.1/886-v6.5-regulator-axp20x-Add-AXP15060-support.patch
deleted file mode 100644
index 6af09204af2e..000000000000
--- a/target/linux/generic/backport-6.1/886-v6.5-regulator-axp20x-Add-AXP15060-support.patch
+++ /dev/null
@@ -1,367 +0,0 @@
-From 9e72869d0fe12aba8cd489e485d93912b3f5c248 Mon Sep 17 00:00:00 2001
-From: Shengyu Qu <wiagn233@outlook.com>
-Date: Wed, 24 May 2023 01:00:12 +0100
-Subject: [PATCH] regulator: axp20x: Add AXP15060 support
-
-The AXP15060 is a typical I2C-controlled PMIC, seen on multiple boards
-with different default register value. Current driver is tested on
-Starfive Visionfive 2.
-
-The RTCLDO is fixed, and cannot even be turned on or off. On top of
-that, its voltage is customisable (either 1.8V or 3.3V). We pretend it's
-a fixed 1.8V regulator since other AXP driver also do like this. Also,
-BSP code ignores this regulator and it's not used according to VF2
-schematic.
-
-Describe the AXP15060's voltage settings and switch registers, how the
-voltages are encoded, and connect this to the MFD device via its
-regulator ID.
-
-Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Reviewed-by: Mark Brown <broonie@kernel.org>
-Tested-by: Shengyu Qu <wiagn233@outlook.com>
-Link: https://lore.kernel.org/r/20230524000012.15028-4-andre.przywara@arm.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/axp20x-regulator.c | 232 +++++++++++++++++++++++++--
- 1 file changed, 223 insertions(+), 9 deletions(-)
-
---- a/drivers/regulator/axp20x-regulator.c
-+++ b/drivers/regulator/axp20x-regulator.c
-@@ -275,6 +275,74 @@
- 
- #define AXP813_PWR_OUT_DCDC7_MASK	BIT_MASK(6)
- 
-+#define AXP15060_DCDC1_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_DCDC2_V_CTRL_MASK		GENMASK(6, 0)
-+#define AXP15060_DCDC3_V_CTRL_MASK		GENMASK(6, 0)
-+#define AXP15060_DCDC4_V_CTRL_MASK		GENMASK(6, 0)
-+#define AXP15060_DCDC5_V_CTRL_MASK		GENMASK(6, 0)
-+#define AXP15060_DCDC6_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_ALDO1_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_ALDO2_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_ALDO3_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_ALDO4_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_ALDO5_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_BLDO1_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_BLDO2_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_BLDO3_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_BLDO4_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_BLDO5_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_CLDO1_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_CLDO2_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_CLDO3_V_CTRL_MASK		GENMASK(4, 0)
-+#define AXP15060_CLDO4_V_CTRL_MASK		GENMASK(5, 0)
-+#define AXP15060_CPUSLDO_V_CTRL_MASK		GENMASK(3, 0)
-+
-+#define AXP15060_PWR_OUT_DCDC1_MASK	BIT_MASK(0)
-+#define AXP15060_PWR_OUT_DCDC2_MASK	BIT_MASK(1)
-+#define AXP15060_PWR_OUT_DCDC3_MASK	BIT_MASK(2)
-+#define AXP15060_PWR_OUT_DCDC4_MASK	BIT_MASK(3)
-+#define AXP15060_PWR_OUT_DCDC5_MASK	BIT_MASK(4)
-+#define AXP15060_PWR_OUT_DCDC6_MASK	BIT_MASK(5)
-+#define AXP15060_PWR_OUT_ALDO1_MASK	BIT_MASK(0)
-+#define AXP15060_PWR_OUT_ALDO2_MASK	BIT_MASK(1)
-+#define AXP15060_PWR_OUT_ALDO3_MASK	BIT_MASK(2)
-+#define AXP15060_PWR_OUT_ALDO4_MASK	BIT_MASK(3)
-+#define AXP15060_PWR_OUT_ALDO5_MASK	BIT_MASK(4)
-+#define AXP15060_PWR_OUT_BLDO1_MASK	BIT_MASK(5)
-+#define AXP15060_PWR_OUT_BLDO2_MASK	BIT_MASK(6)
-+#define AXP15060_PWR_OUT_BLDO3_MASK	BIT_MASK(7)
-+#define AXP15060_PWR_OUT_BLDO4_MASK	BIT_MASK(0)
-+#define AXP15060_PWR_OUT_BLDO5_MASK	BIT_MASK(1)
-+#define AXP15060_PWR_OUT_CLDO1_MASK	BIT_MASK(2)
-+#define AXP15060_PWR_OUT_CLDO2_MASK	BIT_MASK(3)
-+#define AXP15060_PWR_OUT_CLDO3_MASK	BIT_MASK(4)
-+#define AXP15060_PWR_OUT_CLDO4_MASK	BIT_MASK(5)
-+#define AXP15060_PWR_OUT_CPUSLDO_MASK	BIT_MASK(6)
-+#define AXP15060_PWR_OUT_SW_MASK		BIT_MASK(7)
-+
-+#define AXP15060_DCDC23_POLYPHASE_DUAL_MASK		BIT_MASK(6)
-+#define AXP15060_DCDC46_POLYPHASE_DUAL_MASK		BIT_MASK(7)
-+
-+#define AXP15060_DCDC234_500mV_START	0x00
-+#define AXP15060_DCDC234_500mV_STEPS	70
-+#define AXP15060_DCDC234_500mV_END		\
-+	(AXP15060_DCDC234_500mV_START + AXP15060_DCDC234_500mV_STEPS)
-+#define AXP15060_DCDC234_1220mV_START	0x47
-+#define AXP15060_DCDC234_1220mV_STEPS	16
-+#define AXP15060_DCDC234_1220mV_END		\
-+	(AXP15060_DCDC234_1220mV_START + AXP15060_DCDC234_1220mV_STEPS)
-+#define AXP15060_DCDC234_NUM_VOLTAGES	88
-+
-+#define AXP15060_DCDC5_800mV_START	0x00
-+#define AXP15060_DCDC5_800mV_STEPS	32
-+#define AXP15060_DCDC5_800mV_END		\
-+	(AXP15060_DCDC5_800mV_START + AXP15060_DCDC5_800mV_STEPS)
-+#define AXP15060_DCDC5_1140mV_START	0x21
-+#define AXP15060_DCDC5_1140mV_STEPS	35
-+#define AXP15060_DCDC5_1140mV_END		\
-+	(AXP15060_DCDC5_1140mV_START + AXP15060_DCDC5_1140mV_STEPS)
-+#define AXP15060_DCDC5_NUM_VOLTAGES	69
-+
- #define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
- 		    _vmask, _ereg, _emask, _enable_val, _disable_val)		\
- 	[_family##_##_id] = {							\
-@@ -1048,6 +1116,104 @@ static const struct regulator_desc axp81
- 		    AXP22X_PWR_OUT_CTRL2, AXP22X_PWR_OUT_DC1SW_MASK),
- };
- 
-+static const struct linear_range axp15060_dcdc234_ranges[] = {
-+	REGULATOR_LINEAR_RANGE(500000,
-+			       AXP15060_DCDC234_500mV_START,
-+			       AXP15060_DCDC234_500mV_END,
-+			       10000),
-+	REGULATOR_LINEAR_RANGE(1220000,
-+			       AXP15060_DCDC234_1220mV_START,
-+			       AXP15060_DCDC234_1220mV_END,
-+			       20000),
-+};
-+
-+static const struct linear_range axp15060_dcdc5_ranges[] = {
-+	REGULATOR_LINEAR_RANGE(800000,
-+			       AXP15060_DCDC5_800mV_START,
-+			       AXP15060_DCDC5_800mV_END,
-+			       10000),
-+	REGULATOR_LINEAR_RANGE(1140000,
-+			       AXP15060_DCDC5_1140mV_START,
-+			       AXP15060_DCDC5_1140mV_END,
-+			       20000),
-+};
-+
-+static const struct regulator_desc axp15060_regulators[] = {
-+	AXP_DESC(AXP15060, DCDC1, "dcdc1", "vin1", 1500, 3400, 100,
-+		 AXP15060_DCDC1_V_CTRL, AXP15060_DCDC1_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL1, AXP15060_PWR_OUT_DCDC1_MASK),
-+	AXP_DESC_RANGES(AXP15060, DCDC2, "dcdc2", "vin2",
-+			axp15060_dcdc234_ranges, AXP15060_DCDC234_NUM_VOLTAGES,
-+			AXP15060_DCDC2_V_CTRL, AXP15060_DCDC2_V_CTRL_MASK,
-+			AXP15060_PWR_OUT_CTRL1, AXP15060_PWR_OUT_DCDC2_MASK),
-+	AXP_DESC_RANGES(AXP15060, DCDC3, "dcdc3", "vin3",
-+			axp15060_dcdc234_ranges, AXP15060_DCDC234_NUM_VOLTAGES,
-+			AXP15060_DCDC3_V_CTRL, AXP15060_DCDC3_V_CTRL_MASK,
-+			AXP15060_PWR_OUT_CTRL1, AXP15060_PWR_OUT_DCDC3_MASK),
-+	AXP_DESC_RANGES(AXP15060, DCDC4, "dcdc4", "vin4",
-+			axp15060_dcdc234_ranges, AXP15060_DCDC234_NUM_VOLTAGES,
-+			AXP15060_DCDC4_V_CTRL, AXP15060_DCDC4_V_CTRL_MASK,
-+			AXP15060_PWR_OUT_CTRL1, AXP15060_PWR_OUT_DCDC4_MASK),
-+	AXP_DESC_RANGES(AXP15060, DCDC5, "dcdc5", "vin5",
-+			axp15060_dcdc5_ranges, AXP15060_DCDC5_NUM_VOLTAGES,
-+			AXP15060_DCDC5_V_CTRL, AXP15060_DCDC5_V_CTRL_MASK,
-+			AXP15060_PWR_OUT_CTRL1, AXP15060_PWR_OUT_DCDC5_MASK),
-+	AXP_DESC(AXP15060, DCDC6, "dcdc6", "vin6", 500, 3400, 100,
-+		 AXP15060_DCDC6_V_CTRL, AXP15060_DCDC6_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL1, AXP15060_PWR_OUT_DCDC6_MASK),
-+	AXP_DESC(AXP15060, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
-+		 AXP15060_ALDO1_V_CTRL, AXP15060_ALDO1_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL2, AXP15060_PWR_OUT_ALDO1_MASK),
-+	AXP_DESC(AXP15060, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
-+		 AXP15060_ALDO2_V_CTRL, AXP15060_ALDO2_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL2, AXP15060_PWR_OUT_ALDO2_MASK),
-+	AXP_DESC(AXP15060, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
-+		 AXP15060_ALDO3_V_CTRL, AXP15060_ALDO3_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL2, AXP15060_PWR_OUT_ALDO3_MASK),
-+	AXP_DESC(AXP15060, ALDO4, "aldo4", "aldoin", 700, 3300, 100,
-+		 AXP15060_ALDO4_V_CTRL, AXP15060_ALDO4_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL2, AXP15060_PWR_OUT_ALDO4_MASK),
-+	AXP_DESC(AXP15060, ALDO5, "aldo5", "aldoin", 700, 3300, 100,
-+		 AXP15060_ALDO5_V_CTRL, AXP15060_ALDO5_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL2, AXP15060_PWR_OUT_ALDO5_MASK),
-+	AXP_DESC(AXP15060, BLDO1, "bldo1", "bldoin", 700, 3300, 100,
-+		 AXP15060_BLDO1_V_CTRL, AXP15060_BLDO1_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL2, AXP15060_PWR_OUT_BLDO1_MASK),
-+	AXP_DESC(AXP15060, BLDO2, "bldo2", "bldoin", 700, 3300, 100,
-+		 AXP15060_BLDO2_V_CTRL, AXP15060_BLDO2_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL2, AXP15060_PWR_OUT_BLDO2_MASK),
-+	AXP_DESC(AXP15060, BLDO3, "bldo3", "bldoin", 700, 3300, 100,
-+		 AXP15060_BLDO3_V_CTRL, AXP15060_BLDO3_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL2, AXP15060_PWR_OUT_BLDO3_MASK),
-+	AXP_DESC(AXP15060, BLDO4, "bldo4", "bldoin", 700, 3300, 100,
-+		 AXP15060_BLDO4_V_CTRL, AXP15060_BLDO4_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL3, AXP15060_PWR_OUT_BLDO4_MASK),
-+	AXP_DESC(AXP15060, BLDO5, "bldo5", "bldoin", 700, 3300, 100,
-+		 AXP15060_BLDO5_V_CTRL, AXP15060_BLDO5_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL3, AXP15060_PWR_OUT_BLDO5_MASK),
-+	AXP_DESC(AXP15060, CLDO1, "cldo1", "cldoin", 700, 3300, 100,
-+		 AXP15060_CLDO1_V_CTRL, AXP15060_CLDO1_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL3, AXP15060_PWR_OUT_CLDO1_MASK),
-+	AXP_DESC(AXP15060, CLDO2, "cldo2", "cldoin", 700, 3300, 100,
-+		 AXP15060_CLDO2_V_CTRL, AXP15060_CLDO2_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL3, AXP15060_PWR_OUT_CLDO2_MASK),
-+	AXP_DESC(AXP15060, CLDO3, "cldo3", "cldoin", 700, 3300, 100,
-+		 AXP15060_CLDO3_V_CTRL, AXP15060_CLDO3_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL3, AXP15060_PWR_OUT_CLDO3_MASK),
-+	AXP_DESC(AXP15060, CLDO4, "cldo4", "cldoin", 700, 4200, 100,
-+		 AXP15060_CLDO4_V_CTRL, AXP15060_CLDO4_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL3, AXP15060_PWR_OUT_CLDO4_MASK),
-+	/* Supply comes from DCDC5 */
-+	AXP_DESC(AXP15060, CPUSLDO, "cpusldo", NULL, 700, 1400, 50,
-+		 AXP15060_CPUSLDO_V_CTRL, AXP15060_CPUSLDO_V_CTRL_MASK,
-+		 AXP15060_PWR_OUT_CTRL3, AXP15060_PWR_OUT_CPUSLDO_MASK),
-+	/* Supply comes from DCDC1 */
-+	AXP_DESC_SW(AXP15060, SW, "sw", NULL,
-+		    AXP15060_PWR_OUT_CTRL3, AXP15060_PWR_OUT_SW_MASK),
-+	/* Supply comes from ALDO1 */
-+	AXP_DESC_FIXED(AXP15060, RTC_LDO, "rtc-ldo", NULL, 1800),
-+};
-+
- static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
- {
- 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
-@@ -1088,10 +1254,11 @@ static int axp20x_set_dcdc_freq(struct p
- 		step = 150;
- 		break;
- 	case AXP313A_ID:
-+	case AXP15060_ID:
- 		/* The DCDC PWM frequency seems to be fixed to 3 MHz. */
- 		if (dcdcfreq != 0) {
- 			dev_err(&pdev->dev,
--				"DCDC frequency on AXP313a is fixed to 3 MHz.\n");
-+				"DCDC frequency on this PMIC is fixed to 3 MHz.\n");
- 			return -EINVAL;
- 		}
- 
-@@ -1201,6 +1368,15 @@ static int axp20x_set_dcdc_workmode(stru
- 		workmode <<= id - AXP813_DCDC1;
- 		break;
- 
-+	case AXP15060_ID:
-+		reg = AXP15060_DCDC_MODE_CTRL2;
-+		if (id < AXP15060_DCDC1 || id > AXP15060_DCDC6)
-+			return -EINVAL;
-+
-+		mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP15060_DCDC1);
-+		workmode <<= id - AXP15060_DCDC1;
-+		break;
-+
- 	default:
- 		/* should not happen */
- 		WARN_ON(1);
-@@ -1220,7 +1396,7 @@ static bool axp20x_is_polyphase_slave(st
- 
- 	/*
- 	 * Currently in our supported AXP variants, only AXP803, AXP806,
--	 * and AXP813 have polyphase regulators.
-+	 * AXP813 and AXP15060 have polyphase regulators.
- 	 */
- 	switch (axp20x->variant) {
- 	case AXP803_ID:
-@@ -1252,6 +1428,17 @@ static bool axp20x_is_polyphase_slave(st
- 		}
- 		break;
- 
-+	case AXP15060_ID:
-+		regmap_read(axp20x->regmap, AXP15060_DCDC_MODE_CTRL1, &reg);
-+
-+		switch (id) {
-+		case AXP15060_DCDC3:
-+			return !!(reg & AXP15060_DCDC23_POLYPHASE_DUAL_MASK);
-+		case AXP15060_DCDC6:
-+			return !!(reg & AXP15060_DCDC46_POLYPHASE_DUAL_MASK);
-+		}
-+		break;
-+
- 	default:
- 		return false;
- 	}
-@@ -1273,6 +1460,7 @@ static int axp20x_regulator_probe(struct
- 	u32 workmode;
- 	const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name;
- 	const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name;
-+	const char *aldo1_name = axp15060_regulators[AXP15060_ALDO1].name;
- 	bool drivevbus = false;
- 
- 	switch (axp20x->variant) {
-@@ -1312,6 +1500,10 @@ static int axp20x_regulator_probe(struct
- 		drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
- 						  "x-powers,drive-vbus-en");
- 		break;
-+	case AXP15060_ID:
-+		regulators = axp15060_regulators;
-+		nregulators = AXP15060_REG_ID_MAX;
-+		break;
- 	default:
- 		dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
- 			axp20x->variant);
-@@ -1338,8 +1530,9 @@ static int axp20x_regulator_probe(struct
- 			continue;
- 
- 		/*
--		 * Regulators DC1SW and DC5LDO are connected internally,
--		 * so we have to handle their supply names separately.
-+		 * Regulators DC1SW, DC5LDO and RTCLDO on AXP15060 are
-+		 * connected internally, so we have to handle their supply
-+		 * names separately.
- 		 *
- 		 * We always register the regulators in proper sequence,
- 		 * so the supply names are correctly read. See the last
-@@ -1348,7 +1541,8 @@ static int axp20x_regulator_probe(struct
- 		 */
- 		if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
- 		    (regulators == axp803_regulators && i == AXP803_DC1SW) ||
--		    (regulators == axp809_regulators && i == AXP809_DC1SW)) {
-+		    (regulators == axp809_regulators && i == AXP809_DC1SW) ||
-+		    (regulators == axp15060_regulators && i == AXP15060_SW)) {
- 			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
- 						GFP_KERNEL);
- 			if (!new_desc)
-@@ -1360,7 +1554,8 @@ static int axp20x_regulator_probe(struct
- 		}
- 
- 		if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) ||
--		    (regulators == axp809_regulators && i == AXP809_DC5LDO)) {
-+		    (regulators == axp809_regulators && i == AXP809_DC5LDO) ||
-+		    (regulators == axp15060_regulators && i == AXP15060_CPUSLDO)) {
- 			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
- 						GFP_KERNEL);
- 			if (!new_desc)
-@@ -1371,6 +1566,18 @@ static int axp20x_regulator_probe(struct
- 			desc = new_desc;
- 		}
- 
-+
-+		if (regulators == axp15060_regulators && i == AXP15060_RTC_LDO) {
-+			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
-+						GFP_KERNEL);
-+			if (!new_desc)
-+				return -ENOMEM;
-+
-+			*new_desc = regulators[i];
-+			new_desc->supply_name = aldo1_name;
-+			desc = new_desc;
-+		}
-+
- 		rdev = devm_regulator_register(&pdev->dev, desc, &config);
- 		if (IS_ERR(rdev)) {
- 			dev_err(&pdev->dev, "Failed to register %s\n",
-@@ -1389,19 +1596,26 @@ static int axp20x_regulator_probe(struct
- 		}
- 
- 		/*
--		 * Save AXP22X DCDC1 / DCDC5 regulator names for later.
-+		 * Save AXP22X DCDC1 / DCDC5 / AXP15060 ALDO1 regulator names for later.
- 		 */
- 		if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) ||
--		    (regulators == axp809_regulators && i == AXP809_DCDC1))
-+		    (regulators == axp809_regulators && i == AXP809_DCDC1) ||
-+		    (regulators == axp15060_regulators && i == AXP15060_DCDC1))
- 			of_property_read_string(rdev->dev.of_node,
- 						"regulator-name",
- 						&dcdc1_name);
- 
- 		if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) ||
--		    (regulators == axp809_regulators && i == AXP809_DCDC5))
-+		    (regulators == axp809_regulators && i == AXP809_DCDC5) ||
-+		    (regulators == axp15060_regulators && i == AXP15060_DCDC5))
- 			of_property_read_string(rdev->dev.of_node,
- 						"regulator-name",
- 						&dcdc5_name);
-+
-+		if (regulators == axp15060_regulators && i == AXP15060_ALDO1)
-+			of_property_read_string(rdev->dev.of_node,
-+						"regulator-name",
-+						&aldo1_name);
- 	}
- 
- 	if (drivevbus) {
diff --git a/target/linux/generic/backport-6.1/887-v6.5-mfd-axp20x-Add-support-for-AXP192.patch b/target/linux/generic/backport-6.1/887-v6.5-mfd-axp20x-Add-support-for-AXP192.patch
deleted file mode 100644
index d75b4e745347..000000000000
--- a/target/linux/generic/backport-6.1/887-v6.5-mfd-axp20x-Add-support-for-AXP192.patch
+++ /dev/null
@@ -1,383 +0,0 @@
-From 63eeabbc9dbddd7381409feccd9082e5ffabfe59 Mon Sep 17 00:00:00 2001
-From: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
-Date: Thu, 11 May 2023 10:26:08 +0100
-Subject: [PATCH] mfd: axp20x: Add support for AXP192
-
-The AXP192 PMIC is similar to the AXP202/AXP209, but with different
-regulators, additional GPIOs, and a different IRQ register layout.
-
-Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
-Link: https://lore.kernel.org/r/20230511092609.76183-1-aidanmacdonald.0x0@gmail.com
-Signed-off-by: Lee Jones <lee@kernel.org>
----
- drivers/mfd/axp20x-i2c.c   |   2 +
- drivers/mfd/axp20x.c       | 141 +++++++++++++++++++++++++++++++++++++
- include/linux/mfd/axp20x.h |  84 ++++++++++++++++++++++
- 3 files changed, 227 insertions(+)
-
---- a/drivers/mfd/axp20x-i2c.c
-+++ b/drivers/mfd/axp20x-i2c.c
-@@ -60,6 +60,7 @@ static void axp20x_i2c_remove(struct i2c
- #ifdef CONFIG_OF
- static const struct of_device_id axp20x_i2c_of_match[] = {
- 	{ .compatible = "x-powers,axp152", .data = (void *)AXP152_ID },
-+	{ .compatible = "x-powers,axp192", .data = (void *)AXP192_ID },
- 	{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
- 	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
- 	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
-@@ -75,6 +76,7 @@ MODULE_DEVICE_TABLE(of, axp20x_i2c_of_ma
- 
- static const struct i2c_device_id axp20x_i2c_id[] = {
- 	{ "axp152", 0 },
-+	{ "axp192", 0 },
- 	{ "axp202", 0 },
- 	{ "axp209", 0 },
- 	{ "axp221", 0 },
---- a/drivers/mfd/axp20x.c
-+++ b/drivers/mfd/axp20x.c
-@@ -34,6 +34,7 @@
- 
- static const char * const axp20x_model_names[] = {
- 	"AXP152",
-+	"AXP192",
- 	"AXP202",
- 	"AXP209",
- 	"AXP221",
-@@ -94,6 +95,35 @@ static const struct regmap_access_table
- 	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
- };
- 
-+static const struct regmap_range axp192_writeable_ranges[] = {
-+	regmap_reg_range(AXP192_DATACACHE(0), AXP192_DATACACHE(5)),
-+	regmap_reg_range(AXP192_PWR_OUT_CTRL, AXP192_IRQ5_STATE),
-+	regmap_reg_range(AXP20X_DCDC_MODE, AXP192_N_RSTO_CTRL),
-+	regmap_reg_range(AXP20X_CC_CTRL, AXP20X_CC_CTRL),
-+};
-+
-+static const struct regmap_range axp192_volatile_ranges[] = {
-+	regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP192_USB_OTG_STATUS),
-+	regmap_reg_range(AXP192_IRQ1_STATE, AXP192_IRQ4_STATE),
-+	regmap_reg_range(AXP192_IRQ5_STATE, AXP192_IRQ5_STATE),
-+	regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
-+	regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
-+	regmap_reg_range(AXP192_GPIO2_0_STATE, AXP192_GPIO2_0_STATE),
-+	regmap_reg_range(AXP192_GPIO4_3_STATE, AXP192_GPIO4_3_STATE),
-+	regmap_reg_range(AXP192_N_RSTO_CTRL, AXP192_N_RSTO_CTRL),
-+	regmap_reg_range(AXP20X_CHRG_CC_31_24, AXP20X_CC_CTRL),
-+};
-+
-+static const struct regmap_access_table axp192_writeable_table = {
-+	.yes_ranges	= axp192_writeable_ranges,
-+	.n_yes_ranges	= ARRAY_SIZE(axp192_writeable_ranges),
-+};
-+
-+static const struct regmap_access_table axp192_volatile_table = {
-+	.yes_ranges	= axp192_volatile_ranges,
-+	.n_yes_ranges	= ARRAY_SIZE(axp192_volatile_ranges),
-+};
-+
- /* AXP22x ranges are shared with the AXP809, as they cover the same range */
- static const struct regmap_range axp22x_writeable_ranges[] = {
- 	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
-@@ -220,6 +250,19 @@ static const struct resource axp152_pek_
- 	DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
- };
- 
-+static const struct resource axp192_ac_power_supply_resources[] = {
-+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
-+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
-+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_ACIN_OVER_V, "ACIN_OVER_V"),
-+};
-+
-+static const struct resource axp192_usb_power_supply_resources[] = {
-+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
-+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
-+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_VALID, "VBUS_VALID"),
-+	DEFINE_RES_IRQ_NAMED(AXP192_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
-+};
-+
- static const struct resource axp20x_ac_power_supply_resources[] = {
- 	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"),
- 	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"),
-@@ -302,6 +345,15 @@ static const struct regmap_config axp152
- 	.cache_type	= REGCACHE_RBTREE,
- };
- 
-+static const struct regmap_config axp192_regmap_config = {
-+	.reg_bits	= 8,
-+	.val_bits	= 8,
-+	.wr_table	= &axp192_writeable_table,
-+	.volatile_table	= &axp192_volatile_table,
-+	.max_register	= AXP20X_CC_CTRL,
-+	.cache_type	= REGCACHE_RBTREE,
-+};
-+
- static const struct regmap_config axp20x_regmap_config = {
- 	.reg_bits	= 8,
- 	.val_bits	= 8,
-@@ -379,6 +431,42 @@ static const struct regmap_irq axp152_re
- 	INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT,		2, 0),
- };
- 
-+static const struct regmap_irq axp192_regmap_irqs[] = {
-+	INIT_REGMAP_IRQ(AXP192, ACIN_OVER_V,		0, 7),
-+	INIT_REGMAP_IRQ(AXP192, ACIN_PLUGIN,		0, 6),
-+	INIT_REGMAP_IRQ(AXP192, ACIN_REMOVAL,		0, 5),
-+	INIT_REGMAP_IRQ(AXP192, VBUS_OVER_V,		0, 4),
-+	INIT_REGMAP_IRQ(AXP192, VBUS_PLUGIN,		0, 3),
-+	INIT_REGMAP_IRQ(AXP192, VBUS_REMOVAL,		0, 2),
-+	INIT_REGMAP_IRQ(AXP192, VBUS_V_LOW,		0, 1),
-+	INIT_REGMAP_IRQ(AXP192, BATT_PLUGIN,		1, 7),
-+	INIT_REGMAP_IRQ(AXP192, BATT_REMOVAL,	        1, 6),
-+	INIT_REGMAP_IRQ(AXP192, BATT_ENT_ACT_MODE,	1, 5),
-+	INIT_REGMAP_IRQ(AXP192, BATT_EXIT_ACT_MODE,	1, 4),
-+	INIT_REGMAP_IRQ(AXP192, CHARG,		        1, 3),
-+	INIT_REGMAP_IRQ(AXP192, CHARG_DONE,		1, 2),
-+	INIT_REGMAP_IRQ(AXP192, BATT_TEMP_HIGH,	        1, 1),
-+	INIT_REGMAP_IRQ(AXP192, BATT_TEMP_LOW,	        1, 0),
-+	INIT_REGMAP_IRQ(AXP192, DIE_TEMP_HIGH,	        2, 7),
-+	INIT_REGMAP_IRQ(AXP192, CHARG_I_LOW,		2, 6),
-+	INIT_REGMAP_IRQ(AXP192, DCDC1_V_LONG,	        2, 5),
-+	INIT_REGMAP_IRQ(AXP192, DCDC2_V_LONG,	        2, 4),
-+	INIT_REGMAP_IRQ(AXP192, DCDC3_V_LONG,	        2, 3),
-+	INIT_REGMAP_IRQ(AXP192, PEK_SHORT,		2, 1),
-+	INIT_REGMAP_IRQ(AXP192, PEK_LONG,		2, 0),
-+	INIT_REGMAP_IRQ(AXP192, N_OE_PWR_ON,		3, 7),
-+	INIT_REGMAP_IRQ(AXP192, N_OE_PWR_OFF,	        3, 6),
-+	INIT_REGMAP_IRQ(AXP192, VBUS_VALID,		3, 5),
-+	INIT_REGMAP_IRQ(AXP192, VBUS_NOT_VALID,	        3, 4),
-+	INIT_REGMAP_IRQ(AXP192, VBUS_SESS_VALID,	3, 3),
-+	INIT_REGMAP_IRQ(AXP192, VBUS_SESS_END,	        3, 2),
-+	INIT_REGMAP_IRQ(AXP192, LOW_PWR_LVL,	        3, 0),
-+	INIT_REGMAP_IRQ(AXP192, TIMER,			4, 7),
-+	INIT_REGMAP_IRQ(AXP192, GPIO2_INPUT,		4, 2),
-+	INIT_REGMAP_IRQ(AXP192, GPIO1_INPUT,		4, 1),
-+	INIT_REGMAP_IRQ(AXP192, GPIO0_INPUT,		4, 0),
-+};
-+
- static const struct regmap_irq axp20x_regmap_irqs[] = {
- 	INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V,		0, 7),
- 	INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN,		0, 6),
-@@ -616,6 +704,32 @@ static const struct regmap_irq_chip axp1
- 	.num_regs		= 3,
- };
- 
-+static unsigned int axp192_get_irq_reg(struct regmap_irq_chip_data *data,
-+				       unsigned int base, int index)
-+{
-+	/* linear mapping for IRQ1 to IRQ4 */
-+	if (index < 4)
-+		return base + index;
-+
-+	/* handle IRQ5 separately */
-+	if (base == AXP192_IRQ1_EN)
-+		return AXP192_IRQ5_EN;
-+
-+	return AXP192_IRQ5_STATE;
-+}
-+
-+static const struct regmap_irq_chip axp192_regmap_irq_chip = {
-+	.name			= "axp192_irq_chip",
-+	.status_base		= AXP192_IRQ1_STATE,
-+	.ack_base		= AXP192_IRQ1_STATE,
-+	.unmask_base		= AXP192_IRQ1_EN,
-+	.init_ack_masked	= true,
-+	.irqs			= axp192_regmap_irqs,
-+	.num_irqs		= ARRAY_SIZE(axp192_regmap_irqs),
-+	.num_regs		= 5,
-+	.get_irq_reg		= axp192_get_irq_reg,
-+};
-+
- static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
- 	.name			= "axp20x_irq_chip",
- 	.status_base		= AXP20X_IRQ1_STATE,
-@@ -712,6 +826,27 @@ static const struct regmap_irq_chip axp1
- 	.num_regs		= 2,
- };
- 
-+static const struct mfd_cell axp192_cells[] = {
-+	{
-+		.name		= "axp192-adc",
-+		.of_compatible	= "x-powers,axp192-adc",
-+	}, {
-+		.name		= "axp20x-battery-power-supply",
-+		.of_compatible	= "x-powers,axp192-battery-power-supply",
-+	}, {
-+		.name		= "axp20x-ac-power-supply",
-+		.of_compatible	= "x-powers,axp202-ac-power-supply",
-+		.num_resources	= ARRAY_SIZE(axp192_ac_power_supply_resources),
-+		.resources	= axp192_ac_power_supply_resources,
-+	}, {
-+		.name		= "axp20x-usb-power-supply",
-+		.of_compatible	= "x-powers,axp192-usb-power-supply",
-+		.num_resources	= ARRAY_SIZE(axp192_usb_power_supply_resources),
-+		.resources	= axp192_usb_power_supply_resources,
-+	},
-+	{	.name		= "axp20x-regulator" },
-+};
-+
- static const struct mfd_cell axp20x_cells[] = {
- 	{
- 		.name		= "axp20x-gpio",
-@@ -1029,6 +1164,12 @@ int axp20x_match_device(struct axp20x_de
- 		axp20x->regmap_cfg = &axp152_regmap_config;
- 		axp20x->regmap_irq_chip = &axp152_regmap_irq_chip;
- 		break;
-+	case AXP192_ID:
-+		axp20x->nr_cells = ARRAY_SIZE(axp192_cells);
-+		axp20x->cells = axp192_cells;
-+		axp20x->regmap_cfg = &axp192_regmap_config;
-+		axp20x->regmap_irq_chip = &axp192_regmap_irq_chip;
-+		break;
- 	case AXP202_ID:
- 	case AXP209_ID:
- 		axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
---- a/include/linux/mfd/axp20x.h
-+++ b/include/linux/mfd/axp20x.h
-@@ -12,6 +12,7 @@
- 
- enum axp20x_variants {
- 	AXP152_ID = 0,
-+	AXP192_ID,
- 	AXP202_ID,
- 	AXP209_ID,
- 	AXP221_ID,
-@@ -26,6 +27,7 @@ enum axp20x_variants {
- 	NR_AXP20X_VARIANTS,
- };
- 
-+#define AXP192_DATACACHE(m)		(0x06 + (m))
- #define AXP20X_DATACACHE(m)		(0x04 + (m))
- 
- /* Power supply */
-@@ -47,6 +49,13 @@ enum axp20x_variants {
- #define AXP152_DCDC_FREQ		0x37
- #define AXP152_DCDC_MODE		0x80
- 
-+#define AXP192_USB_OTG_STATUS		0x04
-+#define AXP192_PWR_OUT_CTRL		0x12
-+#define AXP192_DCDC2_V_OUT		0x23
-+#define AXP192_DCDC1_V_OUT		0x26
-+#define AXP192_DCDC3_V_OUT		0x27
-+#define AXP192_LDO2_3_V_OUT		0x28
-+
- #define AXP20X_PWR_INPUT_STATUS		0x00
- #define AXP20X_PWR_OP_MODE		0x01
- #define AXP20X_USB_OTG_STATUS		0x02
-@@ -185,6 +194,17 @@ enum axp20x_variants {
- #define AXP152_IRQ2_STATE		0x49
- #define AXP152_IRQ3_STATE		0x4a
- 
-+#define AXP192_IRQ1_EN			0x40
-+#define AXP192_IRQ2_EN			0x41
-+#define AXP192_IRQ3_EN			0x42
-+#define AXP192_IRQ4_EN			0x43
-+#define AXP192_IRQ1_STATE		0x44
-+#define AXP192_IRQ2_STATE		0x45
-+#define AXP192_IRQ3_STATE		0x46
-+#define AXP192_IRQ4_STATE		0x47
-+#define AXP192_IRQ5_EN			0x4a
-+#define AXP192_IRQ5_STATE		0x4d
-+
- #define AXP20X_IRQ1_EN			0x40
- #define AXP20X_IRQ2_EN			0x41
- #define AXP20X_IRQ3_EN			0x42
-@@ -204,6 +224,11 @@ enum axp20x_variants {
- #define AXP15060_IRQ2_STATE		0x49
- 
- /* ADC */
-+#define AXP192_GPIO2_V_ADC_H		0x68
-+#define AXP192_GPIO2_V_ADC_L		0x69
-+#define AXP192_GPIO3_V_ADC_H		0x6a
-+#define AXP192_GPIO3_V_ADC_L		0x6b
-+
- #define AXP20X_ACIN_V_ADC_H		0x56
- #define AXP20X_ACIN_V_ADC_L		0x57
- #define AXP20X_ACIN_I_ADC_H		0x58
-@@ -233,6 +258,8 @@ enum axp20x_variants {
- #define AXP20X_IPSOUT_V_HIGH_L		0x7f
- 
- /* Power supply */
-+#define AXP192_GPIO30_IN_RANGE		0x85
-+
- #define AXP20X_DCDC_MODE		0x80
- #define AXP20X_ADC_EN1			0x82
- #define AXP20X_ADC_EN2			0x83
-@@ -261,6 +288,16 @@ enum axp20x_variants {
- #define AXP152_PWM1_FREQ_Y		0x9c
- #define AXP152_PWM1_DUTY_CYCLE		0x9d
- 
-+#define AXP192_GPIO0_CTRL		0x90
-+#define AXP192_LDO_IO0_V_OUT		0x91
-+#define AXP192_GPIO1_CTRL		0x92
-+#define AXP192_GPIO2_CTRL		0x93
-+#define AXP192_GPIO2_0_STATE		0x94
-+#define AXP192_GPIO4_3_CTRL		0x95
-+#define AXP192_GPIO4_3_STATE		0x96
-+#define AXP192_GPIO2_0_PULL		0x97
-+#define AXP192_N_RSTO_CTRL		0x9e
-+
- #define AXP20X_GPIO0_CTRL		0x90
- #define AXP20X_LDO5_V_OUT		0x91
- #define AXP20X_GPIO1_CTRL		0x92
-@@ -341,6 +378,17 @@ enum axp20x_variants {
- 
- /* Regulators IDs */
- enum {
-+	AXP192_DCDC1 = 0,
-+	AXP192_DCDC2,
-+	AXP192_DCDC3,
-+	AXP192_LDO1,
-+	AXP192_LDO2,
-+	AXP192_LDO3,
-+	AXP192_LDO_IO0,
-+	AXP192_REG_ID_MAX
-+};
-+
-+enum {
- 	AXP20X_LDO1 = 0,
- 	AXP20X_LDO2,
- 	AXP20X_LDO3,
-@@ -531,6 +579,42 @@ enum {
- 	AXP152_IRQ_GPIO0_INPUT,
- };
- 
-+enum axp192_irqs {
-+	AXP192_IRQ_ACIN_OVER_V = 1,
-+	AXP192_IRQ_ACIN_PLUGIN,
-+	AXP192_IRQ_ACIN_REMOVAL,
-+	AXP192_IRQ_VBUS_OVER_V,
-+	AXP192_IRQ_VBUS_PLUGIN,
-+	AXP192_IRQ_VBUS_REMOVAL,
-+	AXP192_IRQ_VBUS_V_LOW,
-+	AXP192_IRQ_BATT_PLUGIN,
-+	AXP192_IRQ_BATT_REMOVAL,
-+	AXP192_IRQ_BATT_ENT_ACT_MODE,
-+	AXP192_IRQ_BATT_EXIT_ACT_MODE,
-+	AXP192_IRQ_CHARG,
-+	AXP192_IRQ_CHARG_DONE,
-+	AXP192_IRQ_BATT_TEMP_HIGH,
-+	AXP192_IRQ_BATT_TEMP_LOW,
-+	AXP192_IRQ_DIE_TEMP_HIGH,
-+	AXP192_IRQ_CHARG_I_LOW,
-+	AXP192_IRQ_DCDC1_V_LONG,
-+	AXP192_IRQ_DCDC2_V_LONG,
-+	AXP192_IRQ_DCDC3_V_LONG,
-+	AXP192_IRQ_PEK_SHORT = 22,
-+	AXP192_IRQ_PEK_LONG,
-+	AXP192_IRQ_N_OE_PWR_ON,
-+	AXP192_IRQ_N_OE_PWR_OFF,
-+	AXP192_IRQ_VBUS_VALID,
-+	AXP192_IRQ_VBUS_NOT_VALID,
-+	AXP192_IRQ_VBUS_SESS_VALID,
-+	AXP192_IRQ_VBUS_SESS_END,
-+	AXP192_IRQ_LOW_PWR_LVL = 31,
-+	AXP192_IRQ_TIMER,
-+	AXP192_IRQ_GPIO2_INPUT = 37,
-+	AXP192_IRQ_GPIO1_INPUT,
-+	AXP192_IRQ_GPIO0_INPUT,
-+};
-+
- enum {
- 	AXP20X_IRQ_ACIN_OVER_V = 1,
- 	AXP20X_IRQ_ACIN_PLUGIN,
diff --git a/target/linux/generic/backport-6.1/890-v6.2-mtd-spinand-winbond-fix-flash-detection.patch b/target/linux/generic/backport-6.1/890-v6.2-mtd-spinand-winbond-fix-flash-detection.patch
deleted file mode 100644
index 38fbc3a3d73f..000000000000
--- a/target/linux/generic/backport-6.1/890-v6.2-mtd-spinand-winbond-fix-flash-detection.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From dbf70fc204d2fbb0d8ad8f42038a60846502efda Mon Sep 17 00:00:00 2001
-From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
-Date: Mon, 10 Oct 2022 13:51:09 +0300
-Subject: [PATCH] mtd: spinand: winbond: fix flash identification
-
-Winbond uses 3 bytes to identify flash: vendor_id, dev_id_0, dev_id_1,
-but current driver uses only first 2 bytes of it for devices
-identification. As result Winbond W25N02KV flash (id_bytes: EF, AA, 22)
-is identified as W25N01GV (id_bytes: EF, AA, 21).
-
-Fix this by adding missed identification bytes.
-
-Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221010105110.446674-1-mikhail.kshevetskiy@iopsys.eu
----
- drivers/mtd/nand/spi/winbond.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/spi/winbond.c
-+++ b/drivers/mtd/nand/spi/winbond.c
-@@ -76,7 +76,7 @@ static int w25m02gv_select_target(struct
- 
- static const struct spinand_info winbond_spinand_table[] = {
- 	SPINAND_INFO("W25M02GV",
--		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab),
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab, 0x21),
- 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2),
- 		     NAND_ECCREQ(1, 512),
- 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-@@ -86,7 +86,7 @@ static const struct spinand_info winbond
- 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
- 		     SPINAND_SELECT_TARGET(w25m02gv_select_target)),
- 	SPINAND_INFO("W25N01GV",
--		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa),
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x21),
- 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
- 		     NAND_ECCREQ(1, 512),
- 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
diff --git a/target/linux/generic/backport-6.1/891-v6.2-mtd-spinand-winbond-add-W25N02KV.patch b/target/linux/generic/backport-6.1/891-v6.2-mtd-spinand-winbond-add-W25N02KV.patch
deleted file mode 100644
index d75a1acc57c7..000000000000
--- a/target/linux/generic/backport-6.1/891-v6.2-mtd-spinand-winbond-add-W25N02KV.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From 6154c7a583483d7b69f53bea868efdc369edd563 Mon Sep 17 00:00:00 2001
-From: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
-Date: Mon, 10 Oct 2022 13:51:10 +0300
-Subject: [PATCH] mtd: spinand: winbond: add Winbond W25N02KV flash support
-
-Add support of Winbond W25N02KV flash
-
-Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20221010105110.446674-2-mikhail.kshevetskiy@iopsys.eu
----
- drivers/mtd/nand/spi/winbond.c | 75 ++++++++++++++++++++++++++++++++++
- 1 file changed, 75 insertions(+)
-
---- a/drivers/mtd/nand/spi/winbond.c
-+++ b/drivers/mtd/nand/spi/winbond.c
-@@ -74,6 +74,72 @@ static int w25m02gv_select_target(struct
- 	return spi_mem_exec_op(spinand->spimem, &op);
- }
- 
-+static int w25n02kv_ooblayout_ecc(struct mtd_info *mtd, int section,
-+				  struct mtd_oob_region *region)
-+{
-+	if (section > 3)
-+		return -ERANGE;
-+
-+	region->offset = 64 + (16 * section);
-+	region->length = 13;
-+
-+	return 0;
-+}
-+
-+static int w25n02kv_ooblayout_free(struct mtd_info *mtd, int section,
-+				   struct mtd_oob_region *region)
-+{
-+	if (section > 3)
-+		return -ERANGE;
-+
-+	region->offset = (16 * section) + 2;
-+	region->length = 14;
-+
-+	return 0;
-+}
-+
-+static const struct mtd_ooblayout_ops w25n02kv_ooblayout = {
-+	.ecc = w25n02kv_ooblayout_ecc,
-+	.free = w25n02kv_ooblayout_free,
-+};
-+
-+static int w25n02kv_ecc_get_status(struct spinand_device *spinand,
-+				   u8 status)
-+{
-+	struct nand_device *nand = spinand_to_nand(spinand);
-+	u8 mbf = 0;
-+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf);
-+
-+	switch (status & STATUS_ECC_MASK) {
-+	case STATUS_ECC_NO_BITFLIPS:
-+		return 0;
-+
-+	case STATUS_ECC_UNCOR_ERROR:
-+		return -EBADMSG;
-+
-+	case STATUS_ECC_HAS_BITFLIPS:
-+		/*
-+		 * Let's try to retrieve the real maximum number of bitflips
-+		 * in order to avoid forcing the wear-leveling layer to move
-+		 * data around if it's not necessary.
-+		 */
-+		if (spi_mem_exec_op(spinand->spimem, &op))
-+			return nanddev_get_ecc_conf(nand)->strength;
-+
-+		mbf >>= 4;
-+
-+		if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf))
-+			return nanddev_get_ecc_conf(nand)->strength;
-+
-+		return mbf;
-+
-+	default:
-+		break;
-+	}
-+
-+	return -EINVAL;
-+}
-+
- static const struct spinand_info winbond_spinand_table[] = {
- 	SPINAND_INFO("W25M02GV",
- 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab, 0x21),
-@@ -94,6 +160,15 @@ static const struct spinand_info winbond
- 					      &update_cache_variants),
- 		     0,
- 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
-+	SPINAND_INFO("W25N02KV",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x22),
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     0,
-+		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
- };
- 
- static int winbond_spinand_init(struct spinand_device *spinand)
diff --git a/target/linux/generic/backport-6.1/892-v6.5-mtd-spinand-winbond-Fix-ecc_get_status.patch b/target/linux/generic/backport-6.1/892-v6.5-mtd-spinand-winbond-Fix-ecc_get_status.patch
deleted file mode 100644
index 2f408f5a3009..000000000000
--- a/target/linux/generic/backport-6.1/892-v6.5-mtd-spinand-winbond-Fix-ecc_get_status.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From f5a05060670a4d8d6523afc7963eb559c2e3615f Mon Sep 17 00:00:00 2001
-From: Olivier Maignial <olivier.maignial@hotmail.fr>
-Date: Fri, 23 Jun 2023 17:33:37 +0200
-Subject: [PATCH] mtd: spinand: winbond: Fix ecc_get_status
-
-Reading ECC status is failing.
-
-w25n02kv_ecc_get_status() is using on-stack buffer for
-SPINAND_GET_FEATURE_OP() output. It is not suitable for
-DMA needs of spi-mem.
-
-Fix this by using the spi-mem operations dedicated buffer
-spinand->scratchbuf.
-
-See
-spinand->scratchbuf:
-https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/mtd/spinand.h?h=v6.3#n418
-spi_mem_check_op():
-https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/spi/spi-mem.c?h=v6.3#n199
-
-Fixes: 6154c7a58348 ("mtd: spinand: winbond: add Winbond W25N02KV flash support")
-Cc: stable@vger.kernel.org
-Signed-off-by: Olivier Maignial <olivier.maignial@hotmail.fr>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/DB4P250MB1032EDB9E36B764A33769039FE23A@DB4P250MB1032.EURP250.PROD.OUTLOOK.COM
----
- drivers/mtd/nand/spi/winbond.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/spi/winbond.c
-+++ b/drivers/mtd/nand/spi/winbond.c
-@@ -108,7 +108,7 @@ static int w25n02kv_ecc_get_status(struc
- {
- 	struct nand_device *nand = spinand_to_nand(spinand);
- 	u8 mbf = 0;
--	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf);
-+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, spinand->scratchbuf);
- 
- 	switch (status & STATUS_ECC_MASK) {
- 	case STATUS_ECC_NO_BITFLIPS:
-@@ -126,7 +126,7 @@ static int w25n02kv_ecc_get_status(struc
- 		if (spi_mem_exec_op(spinand->spimem, &op))
- 			return nanddev_get_ecc_conf(nand)->strength;
- 
--		mbf >>= 4;
-+		mbf = *(spinand->scratchbuf) >> 4;
- 
- 		if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf))
- 			return nanddev_get_ecc_conf(nand)->strength;
diff --git a/target/linux/generic/backport-6.1/894-v6.8-net-ethtool-implement-ethtool_puts.patch b/target/linux/generic/backport-6.1/894-v6.8-net-ethtool-implement-ethtool_puts.patch
deleted file mode 100644
index 379a4fc7c074..000000000000
--- a/target/linux/generic/backport-6.1/894-v6.8-net-ethtool-implement-ethtool_puts.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-From mboxrd@z Thu Jan  1 00:00:00 1970
-Authentication-Results: smtp.subspace.kernel.org;
-	dkim=pass (2048-bit key) header.d=google.com header.i=@google.com header.b="sMUeie/T"
-Received: from mail-yb1-xb49.google.com (mail-yb1-xb49.google.com [IPv6:2607:f8b0:4864:20::b49])
-	by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 84BB8D6D
-	for <bpf@vger.kernel.org>; Wed,  6 Dec 2023 15:16:16 -0800 (PST)
-Received: by mail-yb1-xb49.google.com with SMTP id 3f1490d57ef6-db5416d0fccso403298276.1
-        for <bpf@vger.kernel.org>; Wed, 06 Dec 2023 15:16:16 -0800 (PST)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=google.com; s=20230601; t=1701904575; x=1702509375; darn=vger.kernel.org;
-        h=cc:to:from:subject:message-id:references:mime-version:in-reply-to
-         :date:from:to:cc:subject:date:message-id:reply-to;
-        bh=/7eYcPC4ZNNyPcPPs0B5tDplF0arxw3r0vINNNou0rY=;
-        b=sMUeie/TxdytzC0EyT11QWi1TqTtiv7KCTs1F2vLmUUvPKNA3+1MHFo8ECW+0gQuDE
-         FGrgdZKGK5mXQgkF0N3JiSLvKO8tpQOIB57JLCG5IVy5dr2vVv0ExU3Dag2Cc4oBIBIO
-         w/cH95O1oPlvluIpATmAsxenVr7mFomU63BqYiRGLaEhWeb2hJ636GO8lubtsDfdFFoi
-         GPOL2tQwV93VnqmywBBpFaNAULN0UoCFhfkKv5prvpkXq19sWI7zyorVZ+rdTYem5m4T
-         dXsDaLXPtC3Dh2JOad1duSQIah/wCHYYUcV3IoFhwj2y0Uk/TTCrnZPORweSADcEy6Ho
-         vDrA==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20230601; t=1701904575; x=1702509375;
-        h=cc:to:from:subject:message-id:references:mime-version:in-reply-to
-         :date:x-gm-message-state:from:to:cc:subject:date:message-id:reply-to;
-        bh=/7eYcPC4ZNNyPcPPs0B5tDplF0arxw3r0vINNNou0rY=;
-        b=Dmc6aSntxPlxAk72zVO1G9WoZnFtLolxENlLscYYAHG3VE+PQ8gGN2rPzcGoKb2Btb
-         4b0PvjOzSlPQyghahdhdlz04RtAeeGG/MkfNiYjFql5OifIoovb51kroiPYrVsa7Ps7Y
-         +Pxug0+NPdTm5s9TNz940ZKl3GRME8UTmVxpWJRX03XMOqb6Wgsh2SK9ahXKc4yRsi62
-         3a3J72WmmSgvimxwM/99fXwvoUQpiv2J1xCoqc1Ng4q4qSuZvzmHN7ZTGaUhLxOqLeLK
-         3W4RKHW6rZ7UjppuB6I3NXW+D344By2rdKp1sRXpjdQ0GS3YUcvlRETcJBXJudHfQP5Y
-         CLOw==
-X-Gm-Message-State: AOJu0YzdCTLdwny+N99zeMgyKqFsEZhfIhL2cbgKA6zC1U/OLkxxRLoM
-	XrYVBC9DmxCGmP4o+M/Z/kHUew/9faHlCiLGxw==
-X-Google-Smtp-Source: AGHT+IFRXxBV6JuX5Cl/k2o1+WKkCwkR8j20MJSkmoGCedPAtqFttH8OVh1/6vdfnq8MPN++A2h89peZQhyG8OsJ8A==
-X-Received: from jstitt-linux1.c.googlers.com ([fda3:e722:ac3:cc00:2b:ff92:c0a8:23b5])
- (user=justinstitt job=sendgmr) by 2002:a25:dac7:0:b0:da0:3117:f35 with SMTP
- id n190-20020a25dac7000000b00da031170f35mr28652ybf.3.1701904575576; Wed, 06
- Dec 2023 15:16:15 -0800 (PST)
-Date: Wed, 06 Dec 2023 23:16:10 +0000
-In-Reply-To: <20231206-ethtool_puts_impl-v5-0-5a2528e17bf8@google.com>
-Precedence: bulk
-X-Mailing-List: bpf@vger.kernel.org
-List-Id: <bpf.vger.kernel.org>
-List-Subscribe: <mailto:bpf+subscribe@vger.kernel.org>
-List-Unsubscribe: <mailto:bpf+unsubscribe@vger.kernel.org>
-Mime-Version: 1.0
-References: <20231206-ethtool_puts_impl-v5-0-5a2528e17bf8@google.com>
-X-Developer-Key: i=justinstitt@google.com; a=ed25519; pk=tC3hNkJQTpNX/gLKxTNQKDmiQl6QjBNCGKJINqAdJsE=
-X-Developer-Signature: v=1; a=ed25519-sha256; t=1701904573; l=1840;
- i=justinstitt@google.com; s=20230717; h=from:subject:message-id;
- bh=UMdetIL2ZsPIkSodqhw2fM21NHJVjCu0lRImFuNhVoM=; b=a8rMnXfVVQ5gsxHWG4WRMwOLxZgflqXZtNuKx26vv4DwYvvCtCiYjl3f1frOjV/Ul2kaxq5g/
- b/UOv678JKCDASVokxG5GJifAnU7/kqRxdhcwfRkrD8RUfcsmiZOfyF
-X-Mailer: b4 0.12.3
-Message-ID: <20231206-ethtool_puts_impl-v5-1-5a2528e17bf8@google.com>
-Subject: [PATCH net-next v5 1/3] ethtool: Implement ethtool_puts()
-From: justinstitt@google.com
-To: "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, 
-	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>, Shay Agroskin <shayagr@amazon.com>, 
-	Arthur Kiyanovski <akiyano@amazon.com>, David Arinzon <darinzon@amazon.com>, Noam Dagan <ndagan@amazon.com>, 
-	Saeed Bishara <saeedb@amazon.com>, Rasesh Mody <rmody@marvell.com>, 
-	Sudarsana Kalluru <skalluru@marvell.com>, GR-Linux-NIC-Dev@marvell.com, 
-	Dimitris Michailidis <dmichail@fungible.com>, Yisen Zhuang <yisen.zhuang@huawei.com>, 
-	Salil Mehta <salil.mehta@huawei.com>, Jesse Brandeburg <jesse.brandeburg@intel.com>, 
-	Tony Nguyen <anthony.l.nguyen@intel.com>, Louis Peens <louis.peens@corigine.com>, 
-	Shannon Nelson <shannon.nelson@amd.com>, Brett Creeley <brett.creeley@amd.com>, drivers@pensando.io, 
-	"K. Y. Srinivasan" <kys@microsoft.com>, Haiyang Zhang <haiyangz@microsoft.com>, Wei Liu <wei.liu@kernel.org>, 
-	Dexuan Cui <decui@microsoft.com>, Ronak Doshi <doshir@vmware.com>, 
-	VMware PV-Drivers Reviewers <pv-drivers@vmware.com>, Andy Whitcroft <apw@canonical.com>, Joe Perches <joe@perches.com>, 
-	Dwaipayan Ray <dwaipayanray1@gmail.com>, Lukas Bulwahn <lukas.bulwahn@gmail.com>, 
-	Hauke Mehrtens <hauke@hauke-m.de>, Andrew Lunn <andrew@lunn.ch>, 
-	Florian Fainelli <f.fainelli@gmail.com>, Vladimir Oltean <olteanv@gmail.com>, 
-	"=?utf-8?q?Ar=C4=B1n=C3=A7_=C3=9CNAL?=" <arinc.unal@arinc9.com>, Daniel Golle <daniel@makrotopia.org>, 
-	Landen Chao <Landen.Chao@mediatek.com>, DENG Qingfang <dqfext@gmail.com>, 
-	Sean Wang <sean.wang@mediatek.com>, Matthias Brugger <matthias.bgg@gmail.com>, 
-	AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>, 
-	Linus Walleij <linus.walleij@linaro.org>, 
-	"=?utf-8?q?Alvin_=C5=A0ipraga?=" <alsi@bang-olufsen.dk>, Wei Fang <wei.fang@nxp.com>, 
-	Shenwei Wang <shenwei.wang@nxp.com>, Clark Wang <xiaoning.wang@nxp.com>, 
-	NXP Linux Team <linux-imx@nxp.com>, Lars Povlsen <lars.povlsen@microchip.com>, 
-	Steen Hegelund <Steen.Hegelund@microchip.com>, Daniel Machon <daniel.machon@microchip.com>, 
-	UNGLinuxDriver@microchip.com, Jiawen Wu <jiawenwu@trustnetic.com>, 
-	Mengyuan Lou <mengyuanlou@net-swift.com>, Heiner Kallweit <hkallweit1@gmail.com>, 
-	Russell King <linux@armlinux.org.uk>, Alexei Starovoitov <ast@kernel.org>, 
-	Daniel Borkmann <daniel@iogearbox.net>, Jesper Dangaard Brouer <hawk@kernel.org>, 
-	John Fastabend <john.fastabend@gmail.com>
-Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org, 
-	Nick Desaulniers <ndesaulniers@google.com>, Nathan Chancellor <nathan@kernel.org>, 
-	Kees Cook <keescook@chromium.org>, intel-wired-lan@lists.osuosl.org, 
-	oss-drivers@corigine.com, linux-hyperv@vger.kernel.org, 
-	linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, 
-	bpf@vger.kernel.org, Justin Stitt <justinstitt@google.com>
-Content-Type: text/plain; charset="utf-8"
-
-Use strscpy() to implement ethtool_puts().
-
-Functionally the same as ethtool_sprintf() when it's used with two
-arguments or with just "%s" format specifier.
-
-Signed-off-by: Justin Stitt <justinstitt@google.com>
----
- include/linux/ethtool.h | 13 +++++++++++++
- net/ethtool/ioctl.c     |  7 +++++++
- 2 files changed, 20 insertions(+)
-
---- a/include/linux/ethtool.h
-+++ b/include/linux/ethtool.h
-@@ -843,4 +843,17 @@ int ethtool_get_phc_vclocks(struct net_d
-  * next string.
-  */
- extern __printf(2, 3) void ethtool_sprintf(u8 **data, const char *fmt, ...);
-+
-+/**
-+ * ethtool_puts - Write string to ethtool string data
-+ * @data: Pointer to a pointer to the start of string to update
-+ * @str: String to write
-+ *
-+ * Write string to *data without a trailing newline. Update *data
-+ * to point at start of next string.
-+ *
-+ * Prefer this function to ethtool_sprintf() when given only
-+ * two arguments or if @fmt is just "%s".
-+ */
-+extern void ethtool_puts(u8 **data, const char *str);
- #endif /* _LINUX_ETHTOOL_H */
---- a/net/ethtool/ioctl.c
-+++ b/net/ethtool/ioctl.c
-@@ -1977,6 +1977,13 @@ __printf(2, 3) void ethtool_sprintf(u8 *
- }
- EXPORT_SYMBOL(ethtool_sprintf);
- 
-+void ethtool_puts(u8 **data, const char *str)
-+{
-+	strscpy(*data, str, ETH_GSTRING_LEN);
-+	*data += ETH_GSTRING_LEN;
-+}
-+EXPORT_SYMBOL(ethtool_puts);
-+
- static int ethtool_phys_id(struct net_device *dev, void __user *useraddr)
- {
- 	struct ethtool_value id;
diff --git a/target/linux/generic/backport-6.1/895-01-v6.8-net-phy-add-possible-interfaces.patch b/target/linux/generic/backport-6.1/895-01-v6.8-net-phy-add-possible-interfaces.patch
deleted file mode 100644
index 3a9b856a2065..000000000000
--- a/target/linux/generic/backport-6.1/895-01-v6.8-net-phy-add-possible-interfaces.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 1a7aa058bc92f0edae7a0d1ef1a7b05aec0c643a Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 24 Nov 2023 12:27:52 +0000
-Subject: [PATCH 1/7] net: phy: add possible interfaces
-
-Add a possible_interfaces member to struct phy_device to indicate which
-interfaces a clause 45 PHY may switch between depending on the media.
-This must be populated by the PHY driver by the time the .config_init()
-method completes according to the PHYs host-side configuration.
-
-For example, the Marvell 88x3310 PHY can switch between 10GBASE-R,
-5GBASE-R, 2500BASE-X, and SGMII on the host side depending on the media
-side speed, so all these interface modes are set in the
-possible_interfaces member.
-
-This allows phylib users (such as phylink) to know in advance which
-interface modes to expect, which allows them to appropriately restrict
-the advertised link modes according to the capabilities of other parts
-of the link.
-
-Tested-by: Luo Jie <quic_luoj@quicinc.com>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/E1r6VHk-00DDLN-I7@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phy_device.c | 2 ++
- include/linux/phy.h          | 3 +++
- 2 files changed, 5 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1215,6 +1215,8 @@ int phy_init_hw(struct phy_device *phyde
- 	if (ret < 0)
- 		return ret;
- 
-+	phy_interface_zero(phydev->possible_interfaces);
-+
- 	if (phydev->drv->config_init) {
- 		ret = phydev->drv->config_init(phydev);
- 		if (ret < 0)
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -600,6 +600,8 @@ struct macsec_ops;
-  * @irq_rerun: Flag indicating interrupts occurred while PHY was suspended,
-  *             requiring a rerun of the interrupt handler after resume
-  * @interface: enum phy_interface_t value
-+ * @possible_interfaces: bitmap if interface modes that the attached PHY
-+ *			 will switch between depending on media speed.
-  * @skb: Netlink message for cable diagnostics
-  * @nest: Netlink nest used for cable diagnostics
-  * @ehdr: nNtlink header for cable diagnostics
-@@ -665,6 +667,7 @@ struct phy_device {
- 	u32 dev_flags;
- 
- 	phy_interface_t interface;
-+	DECLARE_PHY_INTERFACE_MASK(possible_interfaces);
- 
- 	/*
- 	 * forced speed & duplex (no autoneg)
diff --git a/target/linux/generic/backport-6.1/895-02-v6.8-net-phylink-use-for_each_set_bit.patch b/target/linux/generic/backport-6.1/895-02-v6.8-net-phylink-use-for_each_set_bit.patch
deleted file mode 100644
index 155ec1c2d9a6..000000000000
--- a/target/linux/generic/backport-6.1/895-02-v6.8-net-phylink-use-for_each_set_bit.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 85631f5b33f2acce7d42dec1d0a062ab40de95b8 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Sun, 19 Nov 2023 21:07:43 +0000
-Subject: [PATCH 2/7] net: phylink: use for_each_set_bit()
-
-Use for_each_set_bit() rather than open coding the for() test_bit()
-loop.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
-Link: https://lore.kernel.org/r/E1r4p15-00Cpxe-C7@rmk-PC.armlinux.org.uk
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/phy/phylink.c | 18 ++++++++----------
- 1 file changed, 8 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -690,18 +690,16 @@ static int phylink_validate_mask(struct
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, };
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(s);
- 	struct phylink_link_state t;
--	int intf;
-+	int interface;
- 
--	for (intf = 0; intf < PHY_INTERFACE_MODE_MAX; intf++) {
--		if (test_bit(intf, interfaces)) {
--			linkmode_copy(s, supported);
-+	for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX) {
-+		linkmode_copy(s, supported);
- 
--			t = *state;
--			t.interface = intf;
--			if (!phylink_validate_mac_and_pcs(pl, s, &t)) {
--				linkmode_or(all_s, all_s, s);
--				linkmode_or(all_adv, all_adv, t.advertising);
--			}
-+		t = *state;
-+		t.interface = interface;
-+		if (!phylink_validate_mac_and_pcs(pl, s, &t)) {
-+			linkmode_or(all_s, all_s, s);
-+			linkmode_or(all_adv, all_adv, t.advertising);
- 		}
- 	}
- 
diff --git a/target/linux/generic/backport-6.1/895-03-v6.8-net-phylink-split-out-per-interface-validation.patch b/target/linux/generic/backport-6.1/895-03-v6.8-net-phylink-split-out-per-interface-validation.patch
deleted file mode 100644
index 163cb953f782..000000000000
--- a/target/linux/generic/backport-6.1/895-03-v6.8-net-phylink-split-out-per-interface-validation.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From d4788b4383ce5caeb4e68818357c81a02117a3f9 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 24 Nov 2023 12:28:19 +0000
-Subject: [PATCH 3/7] net: phylink: split out per-interface validation
-
-Split out the internals of phylink_validate_mask() to make the code
-easier to read.
-
-Tested-by: Luo Jie <quic_luoj@quicinc.com>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/E1r6VIB-00DDLr-7g@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 42 ++++++++++++++++++++++++++++-----------
- 1 file changed, 30 insertions(+), 12 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -682,26 +682,44 @@ static int phylink_validate_mac_and_pcs(
- 	return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
- }
- 
-+static void phylink_validate_one(struct phylink *pl,
-+				 const unsigned long *supported,
-+				 const struct phylink_link_state *state,
-+				 phy_interface_t interface,
-+				 unsigned long *accum_supported,
-+				 unsigned long *accum_advertising)
-+{
-+	__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_supported);
-+	struct phylink_link_state tmp_state;
-+
-+	linkmode_copy(tmp_supported, supported);
-+
-+	tmp_state = *state;
-+	tmp_state.interface = interface;
-+
-+	if (!phylink_validate_mac_and_pcs(pl, tmp_supported, &tmp_state)) {
-+		phylink_dbg(pl, " interface %u (%s) rate match %s supports %*pbl\n",
-+			    interface, phy_modes(interface),
-+			    phy_rate_matching_to_str(tmp_state.rate_matching),
-+			    __ETHTOOL_LINK_MODE_MASK_NBITS, tmp_supported);
-+
-+		linkmode_or(accum_supported, accum_supported, tmp_supported);
-+		linkmode_or(accum_advertising, accum_advertising,
-+			    tmp_state.advertising);
-+	}
-+}
-+
- static int phylink_validate_mask(struct phylink *pl, unsigned long *supported,
- 				 struct phylink_link_state *state,
- 				 const unsigned long *interfaces)
- {
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(all_adv) = { 0, };
- 	__ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, };
--	__ETHTOOL_DECLARE_LINK_MODE_MASK(s);
--	struct phylink_link_state t;
- 	int interface;
- 
--	for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX) {
--		linkmode_copy(s, supported);
--
--		t = *state;
--		t.interface = interface;
--		if (!phylink_validate_mac_and_pcs(pl, s, &t)) {
--			linkmode_or(all_s, all_s, s);
--			linkmode_or(all_adv, all_adv, t.advertising);
--		}
--	}
-+	for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX)
-+		phylink_validate_one(pl, supported, state, interface,
-+				     all_s, all_adv);
- 
- 	linkmode_copy(supported, all_s);
- 	linkmode_copy(state->advertising, all_adv);
diff --git a/target/linux/generic/backport-6.1/895-04-v6.8-net-phylink-pass-PHY-into-phylink_validate_one.patch b/target/linux/generic/backport-6.1/895-04-v6.8-net-phylink-pass-PHY-into-phylink_validate_one.patch
deleted file mode 100644
index 501202067626..000000000000
--- a/target/linux/generic/backport-6.1/895-04-v6.8-net-phylink-pass-PHY-into-phylink_validate_one.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From ce7273c31fadb3143fc80c96a72a42adc19c2757 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 24 Nov 2023 12:28:24 +0000
-Subject: [PATCH 4/7] net: phylink: pass PHY into phylink_validate_one()
-
-Pass the phy (if any) into phylink_validate_one() so that we can
-validate each interface with its rate matching setting.
-
-Tested-by: Luo Jie <quic_luoj@quicinc.com>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/E1r6VIG-00DDLx-Cb@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -682,7 +682,7 @@ static int phylink_validate_mac_and_pcs(
- 	return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
- }
- 
--static void phylink_validate_one(struct phylink *pl,
-+static void phylink_validate_one(struct phylink *pl, struct phy_device *phy,
- 				 const unsigned long *supported,
- 				 const struct phylink_link_state *state,
- 				 phy_interface_t interface,
-@@ -697,6 +697,9 @@ static void phylink_validate_one(struct
- 	tmp_state = *state;
- 	tmp_state.interface = interface;
- 
-+	if (phy)
-+		tmp_state.rate_matching = phy_get_rate_matching(phy, interface);
-+
- 	if (!phylink_validate_mac_and_pcs(pl, tmp_supported, &tmp_state)) {
- 		phylink_dbg(pl, " interface %u (%s) rate match %s supports %*pbl\n",
- 			    interface, phy_modes(interface),
-@@ -718,7 +721,7 @@ static int phylink_validate_mask(struct
- 	int interface;
- 
- 	for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX)
--		phylink_validate_one(pl, supported, state, interface,
-+		phylink_validate_one(pl, NULL, supported, state, interface,
- 				     all_s, all_adv);
- 
- 	linkmode_copy(supported, all_s);
diff --git a/target/linux/generic/backport-6.1/895-05-v6.8-net-phylink-pass-PHY-into-phylink_validate_mask.patch b/target/linux/generic/backport-6.1/895-05-v6.8-net-phylink-pass-PHY-into-phylink_validate_mask.patch
deleted file mode 100644
index 997c74346cb3..000000000000
--- a/target/linux/generic/backport-6.1/895-05-v6.8-net-phylink-pass-PHY-into-phylink_validate_mask.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From c6fec66d3cd76d797f70b30f1511bed10ba45a96 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 24 Nov 2023 12:28:29 +0000
-Subject: [PATCH 5/7] net: phylink: pass PHY into phylink_validate_mask()
-
-Pass the phy (if any) into phylink_validate_mask() so that we can
-validate each interface with its rate matching setting.
-
-Tested-by: Luo Jie <quic_luoj@quicinc.com>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/E1r6VIL-00DDM3-HJ@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 11 +++++++----
- 1 file changed, 7 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -712,7 +712,8 @@ static void phylink_validate_one(struct
- 	}
- }
- 
--static int phylink_validate_mask(struct phylink *pl, unsigned long *supported,
-+static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
-+				 unsigned long *supported,
- 				 struct phylink_link_state *state,
- 				 const unsigned long *interfaces)
- {
-@@ -721,7 +722,7 @@ static int phylink_validate_mask(struct
- 	int interface;
- 
- 	for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX)
--		phylink_validate_one(pl, NULL, supported, state, interface,
-+		phylink_validate_one(pl, phy, supported, state, interface,
- 				     all_s, all_adv);
- 
- 	linkmode_copy(supported, all_s);
-@@ -736,7 +737,8 @@ static int phylink_validate(struct phyli
- 	const unsigned long *interfaces = pl->config->supported_interfaces;
- 
- 	if (state->interface == PHY_INTERFACE_MODE_NA)
--		return phylink_validate_mask(pl, supported, state, interfaces);
-+		return phylink_validate_mask(pl, NULL, supported, state,
-+					     interfaces);
- 
- 	if (!test_bit(state->interface, interfaces))
- 		return -EINVAL;
-@@ -3132,7 +3134,8 @@ static int phylink_sfp_config_optical(st
- 	/* For all the interfaces that are supported, reduce the sfp_support
- 	 * mask to only those link modes that can be supported.
- 	 */
--	ret = phylink_validate_mask(pl, pl->sfp_support, &config, interfaces);
-+	ret = phylink_validate_mask(pl, NULL, pl->sfp_support, &config,
-+				    interfaces);
- 	if (ret) {
- 		phylink_err(pl, "unsupported SFP module: validation with support %*pb failed\n",
- 			    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
diff --git a/target/linux/generic/backport-6.1/895-06-v6.8-net-phylink-split-out-PHY-validation-from-phylink_br.patch b/target/linux/generic/backport-6.1/895-06-v6.8-net-phylink-split-out-PHY-validation-from-phylink_br.patch
deleted file mode 100644
index d3d24c58fbb3..000000000000
--- a/target/linux/generic/backport-6.1/895-06-v6.8-net-phylink-split-out-PHY-validation-from-phylink_br.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From ee0e0ddb910e7e989b65a19d72b6435baa641fc7 Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 24 Nov 2023 12:28:34 +0000
-Subject: [PATCH 6/7] net: phylink: split out PHY validation from
- phylink_bringup_phy()
-
-When bringing up a PHY, we need to work out which ethtool link modes it
-should support and advertise. Clause 22 PHYs operate in a single
-interface mode, which can be easily dealt with. However, clause 45 PHYs
-tend to switch interface mode depending on the media. We need more
-flexible validation at this point, so this patch splits out that code
-in preparation to changing it.
-
-Tested-by: Luo Jie <quic_luoj@quicinc.com>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/E1r6VIQ-00DDM9-LK@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 56 ++++++++++++++++++++++-----------------
- 1 file changed, 31 insertions(+), 25 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1738,6 +1738,35 @@ static void phylink_phy_change(struct ph
- 		    phylink_pause_to_str(pl->phy_state.pause));
- }
- 
-+static int phylink_validate_phy(struct phylink *pl, struct phy_device *phy,
-+				unsigned long *supported,
-+				struct phylink_link_state *state)
-+{
-+	/* Check whether we would use rate matching for the proposed interface
-+	 * mode.
-+	 */
-+	state->rate_matching = phy_get_rate_matching(phy, state->interface);
-+
-+	/* Clause 45 PHYs may switch their Serdes lane between, e.g. 10GBASE-R,
-+	 * 5GBASE-R, 2500BASE-X and SGMII if they are not using rate matching.
-+	 * For some interface modes (e.g. RXAUI, XAUI and USXGMII) switching
-+	 * their Serdes is either unnecessary or not reasonable.
-+	 *
-+	 * For these which switch interface modes, we really need to know which
-+	 * interface modes the PHY supports to properly work out which ethtool
-+	 * linkmodes can be supported. For now, as a work-around, we validate
-+	 * against all interface modes, which may lead to more ethtool link
-+	 * modes being advertised than are actually supported.
-+	 */
-+	if (phy->is_c45 && state->rate_matching == RATE_MATCH_NONE &&
-+	    state->interface != PHY_INTERFACE_MODE_RXAUI &&
-+	    state->interface != PHY_INTERFACE_MODE_XAUI &&
-+	    state->interface != PHY_INTERFACE_MODE_USXGMII)
-+		state->interface = PHY_INTERFACE_MODE_NA;
-+
-+	return phylink_validate(pl, supported, state);
-+}
-+
- static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
- 			       phy_interface_t interface)
- {
-@@ -1758,32 +1787,9 @@ static int phylink_bringup_phy(struct ph
- 	memset(&config, 0, sizeof(config));
- 	linkmode_copy(supported, phy->supported);
- 	linkmode_copy(config.advertising, phy->advertising);
-+	config.interface = interface;
- 
--	/* Check whether we would use rate matching for the proposed interface
--	 * mode.
--	 */
--	config.rate_matching = phy_get_rate_matching(phy, interface);
--
--	/* Clause 45 PHYs may switch their Serdes lane between, e.g. 10GBASE-R,
--	 * 5GBASE-R, 2500BASE-X and SGMII if they are not using rate matching.
--	 * For some interface modes (e.g. RXAUI, XAUI and USXGMII) switching
--	 * their Serdes is either unnecessary or not reasonable.
--	 *
--	 * For these which switch interface modes, we really need to know which
--	 * interface modes the PHY supports to properly work out which ethtool
--	 * linkmodes can be supported. For now, as a work-around, we validate
--	 * against all interface modes, which may lead to more ethtool link
--	 * modes being advertised than are actually supported.
--	 */
--	if (phy->is_c45 && config.rate_matching == RATE_MATCH_NONE &&
--	    interface != PHY_INTERFACE_MODE_RXAUI &&
--	    interface != PHY_INTERFACE_MODE_XAUI &&
--	    interface != PHY_INTERFACE_MODE_USXGMII)
--		config.interface = PHY_INTERFACE_MODE_NA;
--	else
--		config.interface = interface;
--
--	ret = phylink_validate(pl, supported, &config);
-+	ret = phylink_validate_phy(pl, phy, supported, &config);
- 	if (ret) {
- 		phylink_warn(pl, "validation of %s with support %*pb and advertisement %*pb failed: %pe\n",
- 			     phy_modes(config.interface),
diff --git a/target/linux/generic/backport-6.1/895-07-v6.8-net-phylink-use-the-PHY-s-possible_interfaces-if-pop.patch b/target/linux/generic/backport-6.1/895-07-v6.8-net-phylink-use-the-PHY-s-possible_interfaces-if-pop.patch
deleted file mode 100644
index 201afbb7cff5..000000000000
--- a/target/linux/generic/backport-6.1/895-07-v6.8-net-phylink-use-the-PHY-s-possible_interfaces-if-pop.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From 8f7a9799c5949f94ecc3acfd71b36437a7ade73b Mon Sep 17 00:00:00 2001
-From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
-Date: Fri, 24 Nov 2023 12:28:39 +0000
-Subject: [PATCH 7/7] net: phylink: use the PHY's possible_interfaces if
- populated
-
-Some PHYs such as Aquantia, Broadcom 84881, and Marvell 88X33x0 can
-switch between a set of interface types depending on the negotiated
-media speed, or can use rate adaption for some or all of these
-interface types.
-
-We currently assume that these are Clause 45 PHYs that are configured
-not to use a specific set of interface modes, which has worked so far,
-but is just a work-around. In this workaround, we validate using all
-interfaces that the MAC supports, which can lead to extra modes being
-advertised that can not be supported.
-
-To properly address this, switch to using the newly introduced PHY
-possible_interfaces bitmap which indicates which interface modes will
-be used by the PHY as configured. We calculate the union of the PHY's
-possible interfaces and MACs supported interfaces, checking that is
-non-empty. If the PHY is on a SFP, we further reduce the set by those
-which can be used on a SFP module, again checking that is non-empty.
-Finally, we validate the subset of interfaces, taking account of
-whether rate matching will be used for each individual interface mode.
-
-This becomes independent of whether the PHY is clause 22 or clause 45.
-
-It is encouraged that all PHYs that switch interface modes or use
-rate matching should populate phydev->possible_interfaces.
-
-Tested-by: Luo Jie <quic_luoj@quicinc.com>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/E1r6VIV-00DDMF-Pi@rmk-PC.armlinux.org.uk
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/phylink.c | 67 +++++++++++++++++++++++++++++++--------
- 1 file changed, 54 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -121,6 +121,19 @@ do {									\
- })
- #endif
- 
-+static const phy_interface_t phylink_sfp_interface_preference[] = {
-+	PHY_INTERFACE_MODE_25GBASER,
-+	PHY_INTERFACE_MODE_USXGMII,
-+	PHY_INTERFACE_MODE_10GBASER,
-+	PHY_INTERFACE_MODE_5GBASER,
-+	PHY_INTERFACE_MODE_2500BASEX,
-+	PHY_INTERFACE_MODE_SGMII,
-+	PHY_INTERFACE_MODE_1000BASEX,
-+	PHY_INTERFACE_MODE_100BASEX,
-+};
-+
-+static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces);
-+
- /**
-  * phylink_set_port_modes() - set the port type modes in the ethtool mask
-  * @mask: ethtool link mode mask
-@@ -1742,6 +1755,47 @@ static int phylink_validate_phy(struct p
- 				unsigned long *supported,
- 				struct phylink_link_state *state)
- {
-+	DECLARE_PHY_INTERFACE_MASK(interfaces);
-+
-+	/* If the PHY provides a bitmap of the interfaces it will be using
-+	 * depending on the negotiated media speeds, use this to validate
-+	 * which ethtool link modes can be used.
-+	 */
-+	if (!phy_interface_empty(phy->possible_interfaces)) {
-+		/* We only care about the union of the PHY's interfaces and
-+		 * those which the host supports.
-+		 */
-+		phy_interface_and(interfaces, phy->possible_interfaces,
-+				  pl->config->supported_interfaces);
-+
-+		if (phy_interface_empty(interfaces)) {
-+			phylink_err(pl, "PHY has no common interfaces\n");
-+			return -EINVAL;
-+		}
-+
-+		if (phy_on_sfp(phy)) {
-+			/* If the PHY is on a SFP, limit the interfaces to
-+			 * those that can be used with a SFP module.
-+			 */
-+			phy_interface_and(interfaces, interfaces,
-+					  phylink_sfp_interfaces);
-+
-+			if (phy_interface_empty(interfaces)) {
-+				phylink_err(pl, "SFP PHY's possible interfaces becomes empty\n");
-+				return -EINVAL;
-+			}
-+		}
-+
-+		phylink_dbg(pl, "PHY %s uses interfaces %*pbl, validating %*pbl\n",
-+			    phydev_name(phy),
-+			    (int)PHY_INTERFACE_MODE_MAX,
-+			    phy->possible_interfaces,
-+			    (int)PHY_INTERFACE_MODE_MAX, interfaces);
-+
-+		return phylink_validate_mask(pl, phy, supported, state,
-+					     interfaces);
-+	}
-+
- 	/* Check whether we would use rate matching for the proposed interface
- 	 * mode.
- 	 */
-@@ -2985,19 +3039,6 @@ static void phylink_sfp_detach(void *ups
- 	pl->netdev->sfp_bus = NULL;
- }
- 
--static const phy_interface_t phylink_sfp_interface_preference[] = {
--	PHY_INTERFACE_MODE_25GBASER,
--	PHY_INTERFACE_MODE_USXGMII,
--	PHY_INTERFACE_MODE_10GBASER,
--	PHY_INTERFACE_MODE_5GBASER,
--	PHY_INTERFACE_MODE_2500BASEX,
--	PHY_INTERFACE_MODE_SGMII,
--	PHY_INTERFACE_MODE_1000BASEX,
--	PHY_INTERFACE_MODE_100BASEX,
--};
--
--static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces);
--
- static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl,
- 						    const unsigned long *intf)
- {
diff --git a/target/linux/generic/backport-6.1/897-01-v6.9-net-phy-qcom-qca808x-add-helper-for-checking-for-1G-.patch b/target/linux/generic/backport-6.1/897-01-v6.9-net-phy-qcom-qca808x-add-helper-for-checking-for-1G-.patch
deleted file mode 100644
index a11e8049581e..000000000000
--- a/target/linux/generic/backport-6.1/897-01-v6.9-net-phy-qcom-qca808x-add-helper-for-checking-for-1G-.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From f058b2dd70b1a5503dff899010aeb53b436091e5 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 28 Feb 2024 18:24:09 +0100
-Subject: [PATCH 1/2] net: phy: qcom: qca808x: add helper for checking for 1G
- only model
-
-There are 2 versions of QCA808x, one 2.5G capable and one 1G capable.
-Currently, this matter only in the .get_features call however, it will
-be required for filling supported interface modes so lets add a helper
-that can be reused.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/qcom/qca808x.c | 17 ++++++++++++-----
- 1 file changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/qcom/qca808x.c
-+++ b/drivers/net/phy/qcom/qca808x.c
-@@ -156,6 +156,17 @@ static bool qca808x_has_fast_retrain_or_
- 	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
- }
- 
-+static bool qca808x_is_1g_only(struct phy_device *phydev)
-+{
-+	int ret;
-+
-+	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
-+	if (ret < 0)
-+		return true;
-+
-+	return !!(QCA808X_PHY_CHIP_TYPE_1G & ret);
-+}
-+
- static int qca808x_probe(struct phy_device *phydev)
- {
- 	struct device *dev = &phydev->mdio.dev;
-@@ -350,11 +361,7 @@ static int qca808x_get_features(struct p
- 	 * existed in the bit0 of MMD1.21, we need to remove it manually if
- 	 * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d.
- 	 */
--	ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE);
--	if (ret < 0)
--		return ret;
--
--	if (QCA808X_PHY_CHIP_TYPE_1G & ret)
-+	if (qca808x_is_1g_only(phydev))
- 		linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
- 
- 	return 0;
diff --git a/target/linux/generic/backport-6.1/897-02-v6.9-net-phy-qcom-qca808x-fill-in-possible_interfaces.patch b/target/linux/generic/backport-6.1/897-02-v6.9-net-phy-qcom-qca808x-fill-in-possible_interfaces.patch
deleted file mode 100644
index c162fc734812..000000000000
--- a/target/linux/generic/backport-6.1/897-02-v6.9-net-phy-qcom-qca808x-fill-in-possible_interfaces.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From cb28f702960695e26597c332b0e46776e825cc34 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Wed, 28 Feb 2024 18:24:10 +0100
-Subject: [PATCH 2/2] net: phy: qcom: qca808x: fill in possible_interfaces
-
-Currently QCA808x driver does not fill the possible_interfaces.
-2.5G QCA808x support SGMII and 2500Base-X while 1G model only supports
-SGMII, so fill the possible_interfaces accordingly.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/qcom/qca808x.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/net/phy/qcom/qca808x.c
-+++ b/drivers/net/phy/qcom/qca808x.c
-@@ -167,6 +167,16 @@ static bool qca808x_is_1g_only(struct ph
- 	return !!(QCA808X_PHY_CHIP_TYPE_1G & ret);
- }
- 
-+static void qca808x_fill_possible_interfaces(struct phy_device *phydev)
-+{
-+	unsigned long *possible = phydev->possible_interfaces;
-+
-+	__set_bit(PHY_INTERFACE_MODE_SGMII, possible);
-+
-+	if (!qca808x_is_1g_only(phydev))
-+		__set_bit(PHY_INTERFACE_MODE_2500BASEX, possible);
-+}
-+
- static int qca808x_probe(struct phy_device *phydev)
- {
- 	struct device *dev = &phydev->mdio.dev;
-@@ -231,6 +241,8 @@ static int qca808x_config_init(struct ph
- 		}
- 	}
- 
-+	qca808x_fill_possible_interfaces(phydev);
-+
- 	/* Configure adc threshold as 100mv for the link 10M */
- 	return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD,
- 				     QCA808X_ADC_THRESHOLD_MASK,
diff --git a/target/linux/generic/config-6.1 b/target/linux/generic/config-6.1
deleted file mode 100644
index f6163e329444..000000000000
--- a/target/linux/generic/config-6.1
+++ /dev/null
@@ -1,7955 +0,0 @@
-# CONFIG_104_QUAD_8 is not set
-CONFIG_32BIT=y
-CONFIG_64BIT_TIME=y
-# CONFIG_6LOWPAN is not set
-# CONFIG_6LOWPAN_DEBUGFS is not set
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_AB8500_CORE is not set
-# CONFIG_ABP060MG is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACERHDF is not set
-# CONFIG_ACER_WIRELESS is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ACPI_ALS is not set
-# CONFIG_ACPI_APEI is not set
-# CONFIG_ACPI_APEI_PCIEAER is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_CONFIGFS is not set
-# CONFIG_ACPI_CUSTOM_METHOD is not set
-# CONFIG_ACPI_EXTLOG is not set
-# CONFIG_ACPI_HED is not set
-# CONFIG_ACPI_NFIT is not set
-# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
-# CONFIG_ACPI_TABLE_UPGRADE is not set
-# CONFIG_ACPI_VIDEO is not set
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-# CONFIG_AD2S90 is not set
-# CONFIG_AD3552R is not set
-# CONFIG_AD5064 is not set
-# CONFIG_AD5110 is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_AD5272 is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5449 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5592R is not set
-# CONFIG_AD5593R is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5686 is not set
-# CONFIG_AD5686_SPI is not set
-# CONFIG_AD5696_I2C is not set
-# CONFIG_AD5755 is not set
-# CONFIG_AD5758 is not set
-# CONFIG_AD5761 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5766 is not set
-# CONFIG_AD5770R is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5933 is not set
-# CONFIG_AD7091R5 is not set
-# CONFIG_AD7124 is not set
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7266 is not set
-# CONFIG_AD7280 is not set
-# CONFIG_AD7291 is not set
-# CONFIG_AD7292 is not set
-# CONFIG_AD7293 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7303 is not set
-# CONFIG_AD74413R is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD7606_IFACE_PARALLEL is not set
-# CONFIG_AD7606_IFACE_SPI is not set
-# CONFIG_AD7746 is not set
-# CONFIG_AD7766 is not set
-# CONFIG_AD7768_1 is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7791 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_AD7923 is not set
-# CONFIG_AD7949 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD8366 is not set
-# CONFIG_AD8801 is not set
-# CONFIG_AD9467 is not set
-# CONFIG_AD9523 is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_ADA4250 is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADE7854 is not set
-# CONFIG_ADF4350 is not set
-# CONFIG_ADF4371 is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADIN1100_PHY is not set
-# CONFIG_ADIN1110 is not set
-# CONFIG_ADIN_PHY is not set
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16130 is not set
-# CONFIG_ADIS16136 is not set
-# CONFIG_ADIS16201 is not set
-# CONFIG_ADIS16203 is not set
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_ADIS16260 is not set
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADIS16460 is not set
-# CONFIG_ADIS16475 is not set
-# CONFIG_ADIS16480 is not set
-# CONFIG_ADI_AXI_ADC is not set
-# CONFIG_ADJD_S311 is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ADMV1013 is not set
-# CONFIG_ADMV1014 is not set
-# CONFIG_ADMV4420 is not set
-# CONFIG_ADMV8818 is not set
-# CONFIG_ADRF6780 is not set
-# CONFIG_ADT7316 is not set
-# CONFIG_ADUX1020 is not set
-CONFIG_ADVISE_SYSCALLS=y
-# CONFIG_ADXL313_I2C is not set
-# CONFIG_ADXL313_SPI is not set
-# CONFIG_ADXL345_I2C is not set
-# CONFIG_ADXL345_SPI is not set
-# CONFIG_ADXL355_I2C is not set
-# CONFIG_ADXL355_SPI is not set
-# CONFIG_ADXL367_I2C is not set
-# CONFIG_ADXL367_SPI is not set
-# CONFIG_ADXL372_I2C is not set
-# CONFIG_ADXL372_SPI is not set
-# CONFIG_ADXRS290 is not set
-# CONFIG_ADXRS450 is not set
-CONFIG_AEABI=y
-# CONFIG_AFE4403 is not set
-# CONFIG_AFE4404 is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_AFS_DEBUG_CURSOR is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_AF_KCM is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AF_RXRPC_INJECT_LOSS is not set
-# CONFIG_AF_RXRPC_IPV6 is not set
-CONFIG_AF_UNIX_OOB=y
-# CONFIG_AGP is not set
-# CONFIG_AHCI_BRCM is not set
-# CONFIG_AHCI_CEVA is not set
-# CONFIG_AHCI_DWC is not set
-# CONFIG_AHCI_IMX is not set
-# CONFIG_AHCI_MVEBU is not set
-# CONFIG_AHCI_QORIQ is not set
-# CONFIG_AHCI_XGENE is not set
-CONFIG_AIO=y
-# CONFIG_AIRO is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIR_EN8811H_PHY is not set
-# CONFIG_AIX_PARTITION is not set
-# CONFIG_AK09911 is not set
-# CONFIG_AK8974 is not set
-# CONFIG_AK8975 is not set
-# CONFIG_AL3010 is not set
-# CONFIG_AL3320A is not set
-# CONFIG_ALIM7101_WDT is not set
-CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_ALTERA_MBOX is not set
-# CONFIG_ALTERA_MSGDMA is not set
-# CONFIG_ALTERA_STAPL is not set
-# CONFIG_ALTERA_TSE is not set
-# CONFIG_ALX is not set
-# CONFIG_AL_FIC is not set
-# CONFIG_AM2315 is not set
-# CONFIG_AM335X_PHY_USB is not set
-# CONFIG_AMBA_PL08X is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMD_MEM_ENCRYPT is not set
-# CONFIG_AMD_PHY is not set
-# CONFIG_AMD_XGBE is not set
-# CONFIG_AMD_XGBE_HAVE_ECC is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_AMILO_RFKILL is not set
-# CONFIG_AMPERE_ERRATUM_AC03_CPU_38 is not set
-# CONFIG_AMT is not set
-# CONFIG_ANDROID is not set
-# CONFIG_ANDROID_BINDER_IPC is not set
-CONFIG_ANON_INODES=y
-# CONFIG_ANON_VMA_NAME is not set
-# CONFIG_APDS9300 is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_APDS9960 is not set
-# CONFIG_APM8018X is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_APPLE_GMUX is not set
-# CONFIG_APPLE_MFI_FASTCHARGE is not set
-# CONFIG_APPLE_PROPERTIES is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AQTION is not set
-# CONFIG_AQUANTIA_PHY is not set
-# CONFIG_AR5523 is not set
-# CONFIG_AR7 is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_AR8216_PHY_LEDS is not set
-# CONFIG_ARCH_ACTIONS is not set
-# CONFIG_ARCH_AGILEX is not set
-# CONFIG_ARCH_AIROHA is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_APPLE is not set
-# CONFIG_ARCH_ARTPEC is not set
-# CONFIG_ARCH_ASPEED is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_AXXIA is not set
-# CONFIG_ARCH_BCM is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCM4908 is not set
-# CONFIG_ARCH_BCMBCA is not set
-# CONFIG_ARCH_BCM_21664 is not set
-# CONFIG_ARCH_BCM_23550 is not set
-# CONFIG_ARCH_BCM_281XX is not set
-# CONFIG_ARCH_BCM_5301X is not set
-# CONFIG_ARCH_BCM_53573 is not set
-# CONFIG_ARCH_BCM_63XX is not set
-# CONFIG_ARCH_BCM_CYGNUS is not set
-# CONFIG_ARCH_BCM_HR2 is not set
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BCM_NSP is not set
-# CONFIG_ARCH_BERLIN is not set
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-# CONFIG_ARCH_BITMAIN is not set
-# CONFIG_ARCH_BRCMSTB is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGICOLOR is not set
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_EXYNOS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-CONFIG_ARCH_FORCE_MAX_ORDER=11
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_HI3xxx is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_HPE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_INTEL_SOCFPGA is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_K3 is not set
-# CONFIG_ARCH_KEEMBAY is not set
-# CONFIG_ARCH_KEYSTONE is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_LG1K is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-# CONFIG_ARCH_MILBEAUT is not set
-CONFIG_ARCH_MMAP_RND_BITS=8
-CONFIG_ARCH_MMAP_RND_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_BITS_MIN=8
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MSTARV7 is not set
-# CONFIG_ARCH_MULTIPLATFORM is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_NPCM is not set
-# CONFIG_ARCH_NSPIRE is not set
-# CONFIG_ARCH_NXP is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP2PLUS is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_OXNAS is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_RANDOM is not set
-# CONFIG_ARCH_RDA is not set
-# CONFIG_ARCH_REALTEK is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S32 is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SEATTLE is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_SPARX5 is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_STM32 is not set
-# CONFIG_ARCH_STRATIX10 is not set
-# CONFIG_ARCH_SUNPLUS is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_SYNQUACER is not set
-# CONFIG_ARCH_TANGO is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_THUNDER2 is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_VIRT is not set
-# CONFIG_ARCH_VISCONTI is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_VULCAN is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_WANTS_THP_SWAP is not set
-# CONFIG_ARCH_WM8505 is not set
-# CONFIG_ARCH_WM8750 is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_XGENE is not set
-# CONFIG_ARCH_ZX is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCNET is not set
-# CONFIG_ARC_EMAC is not set
-# CONFIG_ARC_IRQ_NO_AUTOSAVE is not set
-# CONFIG_ARM64_16K_PAGES is not set
-# CONFIG_ARM64_64K_PAGES is not set
-# CONFIG_ARM64_AMU_EXTN is not set
-# CONFIG_ARM64_BTI is not set
-CONFIG_ARM64_CNP=y
-# CONFIG_ARM64_CRYPTO is not set
-# CONFIG_ARM64_E0PD is not set
-# CONFIG_ARM64_EPAN is not set
-# CONFIG_ARM64_ERRATUM_1024718 is not set
-# CONFIG_ARM64_ERRATUM_1165522 is not set
-# CONFIG_ARM64_ERRATUM_1286807 is not set
-# CONFIG_ARM64_ERRATUM_1319367 is not set
-# CONFIG_ARM64_ERRATUM_1418040 is not set
-# CONFIG_ARM64_ERRATUM_1463225 is not set
-# CONFIG_ARM64_ERRATUM_1508412 is not set
-# CONFIG_ARM64_ERRATUM_1530923 is not set
-# CONFIG_ARM64_ERRATUM_1542419 is not set
-# CONFIG_ARM64_ERRATUM_1742098 is not set
-# CONFIG_ARM64_ERRATUM_2051678 is not set
-# CONFIG_ARM64_ERRATUM_2054223 is not set
-# CONFIG_ARM64_ERRATUM_2067961 is not set
-# CONFIG_ARM64_ERRATUM_2077057 is not set
-# CONFIG_ARM64_ERRATUM_2441007 is not set
-# CONFIG_ARM64_ERRATUM_2441009 is not set
-# CONFIG_ARM64_ERRATUM_2658417 is not set
-# CONFIG_ARM64_ERRATUM_2966298 is not set
-# CONFIG_ARM64_ERRATUM_3194386 is not set
-# CONFIG_ARM64_ERRATUM_3312417 is not set
-# CONFIG_ARM64_ERRATUM_819472 is not set
-# CONFIG_ARM64_ERRATUM_824069 is not set
-# CONFIG_ARM64_ERRATUM_826319 is not set
-# CONFIG_ARM64_ERRATUM_827319 is not set
-# CONFIG_ARM64_ERRATUM_832075 is not set
-# CONFIG_ARM64_ERRATUM_834220 is not set
-# CONFIG_ARM64_ERRATUM_843419 is not set
-# CONFIG_ARM64_ERRATUM_845719 is not set
-# CONFIG_ARM64_ERRATUM_858921 is not set
-# CONFIG_ARM64_HW_AFDBM is not set
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_MODULE_PLTS=y
-# CONFIG_ARM64_MTE is not set
-CONFIG_ARM64_PAN=y
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PSEUDO_NMI is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_PTR_AUTH is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-# CONFIG_ARM64_RAS_EXTN is not set
-# CONFIG_ARM64_RELOC_TEST is not set
-# CONFIG_ARM64_SME is not set
-# CONFIG_ARM64_SVE is not set
-CONFIG_ARM64_SW_TTBR0_PAN=y
-# CONFIG_ARM64_TLB_RANGE is not set
-# CONFIG_ARM64_UAO is not set
-# CONFIG_ARM64_USE_LSE_ATOMICS is not set
-# CONFIG_ARM64_VA_BITS_48 is not set
-# CONFIG_ARM64_VHE is not set
-# CONFIG_ARM_APPENDED_DTB is not set
-# CONFIG_ARM_ARCH_TIMER is not set
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_CCI is not set
-# CONFIG_ARM_CCI400_PMU is not set
-# CONFIG_ARM_CCI5xx_PMU is not set
-# CONFIG_ARM_CCI_PMU is not set
-# CONFIG_ARM_CCN is not set
-# CONFIG_ARM_CMN is not set
-# CONFIG_ARM_CPUIDLE is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-# CONFIG_ARM_CRYPTO is not set
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-# CONFIG_ARM_DSU_PMU is not set
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_364296 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_643719 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_ARM_ERRATA_754322 is not set
-# CONFIG_ARM_ERRATA_754327 is not set
-# CONFIG_ARM_ERRATA_764319 is not set
-# CONFIG_ARM_ERRATA_764369 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-# CONFIG_ARM_ERRATA_775420 is not set
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_ERRATA_814220 is not set
-# CONFIG_ARM_ERRATA_818325_852422 is not set
-# CONFIG_ARM_ERRATA_821420 is not set
-# CONFIG_ARM_ERRATA_825619 is not set
-# CONFIG_ARM_ERRATA_852421 is not set
-# CONFIG_ARM_ERRATA_852423 is not set
-# CONFIG_ARM_ERRATA_857271 is not set
-# CONFIG_ARM_ERRATA_857272 is not set
-# CONFIG_ARM_FFA_TRANSPORT is not set
-CONFIG_ARM_GIC_MAX_NR=1
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-# CONFIG_ARM_LPAE is not set
-# CONFIG_ARM_MEDIATEK_CPUFREQ_HW is not set
-# CONFIG_ARM_MHU is not set
-CONFIG_ARM_MODULE_PLTS=y
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-# CONFIG_ARM_PSCI is not set
-# CONFIG_ARM_PSCI_CHECKER is not set
-# CONFIG_ARM_PSCI_CPUIDLE is not set
-# CONFIG_ARM_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM_SBSA_WATCHDOG is not set
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-# CONFIG_ARM_SCPI_PROTOCOL is not set
-# CONFIG_ARM_SDE_INTERFACE is not set
-# CONFIG_ARM_SMCCC_SOC_ID is not set
-# CONFIG_ARM_SMC_WATCHDOG is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-# CONFIG_ARM_SPE_PMU is not set
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_ARM_TIMER_SP804 is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_ARM_VIRT_EXT is not set
-# CONFIG_AS3935 is not set
-# CONFIG_AS73211 is not set
-# CONFIG_ASM9260_TIMER is not set
-# CONFIG_ASN1 is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_ASUS_WIRELESS is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_AT91_SAMA5D2_ADC is not set
-# CONFIG_ATA is not set
-# CONFIG_ATAGS is not set
-CONFIG_ATAGS_PROC=y
-# CONFIG_ATALK is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_ACPI is not set
-CONFIG_ATA_BMDMA=y
-# CONFIG_ATA_FORCE is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA_LEDS is not set
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATA_PIIX is not set
-CONFIG_ATA_SFF=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_ATH10K is not set
-# CONFIG_ATH25 is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH6KL is not set
-# CONFIG_ATH79 is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATH9K_HTC is not set
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATLAS_EZO_SENSOR is not set
-# CONFIG_ATLAS_PH_SENSOR is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATMEL_PIT is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_ATP is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
-# CONFIG_AURORA_NB8800 is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTO_ZRELADDR is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX88796 is not set
-# CONFIG_AX88796B_PHY is not set
-# CONFIG_AXP20X_ADC is not set
-# CONFIG_AXP20X_POWER is not set
-# CONFIG_AXP288_ADC is not set
-# CONFIG_AXP288_FUEL_GAUGE is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_B53_MDIO_DRIVER is not set
-# CONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_B53_SERDES is not set
-# CONFIG_B53_SPI_DRIVER is not set
-# CONFIG_B53_SRAB_DRIVER is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_APPLE is not set
-# CONFIG_BACKLIGHT_ARCXCNN is not set
-# CONFIG_BACKLIGHT_BD6107 is not set
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_BACKLIGHT_GPIO is not set
-# CONFIG_BACKLIGHT_KTD253 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_BACKLIGHT_LED is not set
-# CONFIG_BACKLIGHT_LM3630A is not set
-# CONFIG_BACKLIGHT_LM3639 is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-# CONFIG_BACKLIGHT_LV5207LP is not set
-# CONFIG_BACKLIGHT_PANDORA is not set
-# CONFIG_BACKLIGHT_PM8941_WLED is not set
-# CONFIG_BACKLIGHT_PWM is not set
-# CONFIG_BACKLIGHT_QCOM_WLED is not set
-# CONFIG_BACKLIGHT_RPI is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_BACKTRACE_VERBOSE is not set
-# CONFIG_BAREUDP is not set
-CONFIG_BASE_FULL=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BATTERY_BQ27XXX is not set
-# CONFIG_BATTERY_BQ27XXX_HDQ is not set
-# CONFIG_BATTERY_CW2015 is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_GAUGE_LTC2941 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
-# CONFIG_BATTERY_LEGO_EV3 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_MAX1721X is not set
-# CONFIG_BATTERY_RT5033 is not set
-# CONFIG_BATTERY_SAMSUNG_SDI is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BATTERY_UG3105 is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BCACHE is not set
-# CONFIG_BCM2712_MIP is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM54140_PHY is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_BCM63XX_PHY is not set
-# CONFIG_BCM7038_L1_IRQ is not set
-# CONFIG_BCM7038_WDT is not set
-# CONFIG_BCM7120_L2_IRQ is not set
-# CONFIG_BCM7XXX_PHY is not set
-# CONFIG_BCM84881_PHY is not set
-# CONFIG_BCM87XX_PHY is not set
-# CONFIG_BCMA is not set
-# CONFIG_BCMA_DRIVER_GPIO is not set
-CONFIG_BCMA_POSSIBLE=y
-# CONFIG_BCMGENET is not set
-# CONFIG_BCM_IPROC_ADC is not set
-# CONFIG_BCM_KONA_USB2_PHY is not set
-# CONFIG_BCM_SBA_RAID is not set
-# CONFIG_BCM_VK is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BE2NET is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BGMAC is not set
-# CONFIG_BH1750 is not set
-# CONFIG_BH1780 is not set
-# CONFIG_BIG_KEYS is not set
-# CONFIG_BIG_LITTLE is not set
-CONFIG_BINARY_PRINTF=y
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_FDPIC is not set
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_BINFMT_SCRIPT=y
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_CGROUP_IOCOST is not set
-# CONFIG_BLK_CGROUP_IOLATENCY is not set
-# CONFIG_BLK_CGROUP_IOPRIO is not set
-# CONFIG_BLK_CMDLINE_PARSER is not set
-# CONFIG_BLK_DEBUG_FS is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CS5536 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDE_AU1XXX is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_NULL_BLK is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_PMEM is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RBD is not set
-# CONFIG_BLK_DEV_RSXX is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SKD is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_THROTTLING is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UBLK is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_ZONED is not set
-# CONFIG_BLK_INLINE_ENCRYPTION is not set
-# CONFIG_BLK_NVMEM is not set
-# CONFIG_BLK_SED_OPAL is not set
-# CONFIG_BLK_WBT is not set
-CONFIG_BLOCK=y
-# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
-# CONFIG_BMA180 is not set
-# CONFIG_BMA220 is not set
-# CONFIG_BMA400 is not set
-# CONFIG_BMC150_ACCEL is not set
-# CONFIG_BMC150_MAGN is not set
-# CONFIG_BMC150_MAGN_I2C is not set
-# CONFIG_BMC150_MAGN_SPI is not set
-# CONFIG_BME680 is not set
-# CONFIG_BMG160 is not set
-# CONFIG_BMI088_ACCEL is not set
-# CONFIG_BMI160_I2C is not set
-# CONFIG_BMI160_SPI is not set
-# CONFIG_BMIPS_GENERIC is not set
-# CONFIG_BMP280 is not set
-# CONFIG_BNA is not set
-# CONFIG_BNX2 is not set
-# CONFIG_BNX2X is not set
-# CONFIG_BNX2X_SRIOV is not set
-# CONFIG_BNXT is not set
-# CONFIG_BONDING is not set
-# CONFIG_BOOKE_WDT is not set
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
-# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-# CONFIG_BOOTTIME_TRACING is not set
-# CONFIG_BOOT_CONFIG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_BOOT_RAW=y
-# CONFIG_BOSCH_BNO055_I2C is not set
-# CONFIG_BOSCH_BNO055_SERIAL is not set
-# CONFIG_BOUNCE is not set
-CONFIG_BPF=y
-# CONFIG_BPFILTER is not set
-CONFIG_BPF_JIT=y
-# CONFIG_BPF_JIT_ALWAYS_ON is not set
-CONFIG_BPF_JIT_DEFAULT_ON=y
-# CONFIG_BPF_PRELOAD is not set
-# CONFIG_BPF_STREAM_PARSER is not set
-CONFIG_BPF_SYSCALL=y
-CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
-# CONFIG_BPQETHER is not set
-CONFIG_BQL=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMSMAC is not set
-# CONFIG_BRCMSTB_GISB_ARB is not set
-# CONFIG_BRCMSTB_L2_IRQ is not set
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_CFM is not set
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_BRIDGE_MRP is not set
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_BRIDGE_VLAN_FILTERING=y
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_BT is not set
-# CONFIG_BTRFS_ASSERT is not set
-# CONFIG_BTRFS_DEBUG is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS_REF_VERIFY is not set
-# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
-# CONFIG_BT_AOSPEXT is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_BREDR is not set
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_FEATURE_DEBUG is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
-# CONFIG_BT_HCIBTUSB_MTK is not set
-# CONFIG_BT_HCIBTUSB_RTL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIUART_3WIRE is not set
-# CONFIG_BT_HCIUART_AG6XX is not set
-# CONFIG_BT_HCIUART_ATH3K is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIUART_MRVL is not set
-# CONFIG_BT_HCIUART_QCA is not set
-# CONFIG_BT_HCIUART_RTL is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-# CONFIG_BT_HS is not set
-# CONFIG_BT_LE is not set
-# CONFIG_BT_LEDS is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_MSFTEXT is not set
-# CONFIG_BT_MTKSDIO is not set
-# CONFIG_BT_MTKUART is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_SELFTEST is not set
-# CONFIG_BT_VIRTIO is not set
-CONFIG_BUG=y
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-CONFIG_BUILDTIME_EXTABLE_SORT=y
-CONFIG_BUILDTIME_TABLE_SORT=y
-# CONFIG_BUILD_BIN2C is not set
-CONFIG_BUILD_SALT=""
-# CONFIG_C2PORT is not set
-CONFIG_CACHE_L2X0_PMU=y
-# CONFIG_CADENCE_WATCHDOG is not set
-# CONFIG_CAIF is not set
-# CONFIG_CAN is not set
-# CONFIG_CAN_BCM is not set
-# CONFIG_CAN_CAN327 is not set
-# CONFIG_CAN_CTUCANFD_PCI is not set
-# CONFIG_CAN_CTUCANFD_PLATFORM is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_ESD_USB is not set
-# CONFIG_CAN_ETAS_ES58X is not set
-# CONFIG_CAN_GS_USB is not set
-# CONFIG_CAN_GW is not set
-# CONFIG_CAN_HI311X is not set
-# CONFIG_CAN_IFI_CANFD is not set
-# CONFIG_CAN_ISOTP is not set
-# CONFIG_CAN_J1939 is not set
-# CONFIG_CAN_KVASER_PCIEFD is not set
-# CONFIG_CAN_MCBA_USB is not set
-# CONFIG_CAN_MCP251XFD is not set
-# CONFIG_CAN_M_CAN is not set
-# CONFIG_CAN_NETLINK is not set
-# CONFIG_CAN_PEAK_PCIEFD is not set
-# CONFIG_CAN_RAW is not set
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAN_RCAR_CANFD is not set
-# CONFIG_CAN_SLCAN is not set
-# CONFIG_CAN_SUN4I is not set
-# CONFIG_CAN_UCAN is not set
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_VXCAN is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CARL9170 is not set
-# CONFIG_CASSINI is not set
-# CONFIG_CAVIUM_CPT is not set
-# CONFIG_CAVIUM_ERRATUM_22375 is not set
-# CONFIG_CAVIUM_ERRATUM_23144 is not set
-# CONFIG_CAVIUM_ERRATUM_23154 is not set
-# CONFIG_CAVIUM_ERRATUM_27456 is not set
-# CONFIG_CAVIUM_ERRATUM_30115 is not set
-# CONFIG_CAVIUM_OCTEON_SOC is not set
-# CONFIG_CAVIUM_PTP is not set
-# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_CC10001_ADC is not set
-# CONFIG_CCS811 is not set
-CONFIG_CC_CAN_LINK=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_CFG80211 is not set
-# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
-CONFIG_CFG80211_HEADERS=y
-# CONFIG_CGROUPS is not set
-# CONFIG_CGROUP_FAVOR_DYNMODS is not set
-# CONFIG_CGROUP_MISC is not set
-# CONFIG_CHARGER_ADP5061 is not set
-# CONFIG_CHARGER_BD99954 is not set
-# CONFIG_CHARGER_BQ2415X is not set
-# CONFIG_CHARGER_BQ24190 is not set
-# CONFIG_CHARGER_BQ24257 is not set
-# CONFIG_CHARGER_BQ24735 is not set
-# CONFIG_CHARGER_BQ2515X is not set
-# CONFIG_CHARGER_BQ256XX is not set
-# CONFIG_CHARGER_BQ25890 is not set
-# CONFIG_CHARGER_BQ25980 is not set
-# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
-# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_ISP1704 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_LT3651 is not set
-# CONFIG_CHARGER_LTC3651 is not set
-# CONFIG_CHARGER_LTC4162L is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_MAX77976 is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_QCOM_SMBB is not set
-# CONFIG_CHARGER_RT9455 is not set
-# CONFIG_CHARGER_SBS is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHARGER_TWL4030 is not set
-# CONFIG_CHARGER_UCS1002 is not set
-# CONFIG_CHASH_SELFTEST is not set
-# CONFIG_CHASH_STATS is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_CHELSIO_T4VF is not set
-# CONFIG_CHROME_PLATFORMS is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_ACL is not set
-CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
-# CONFIG_CIFS_DEBUG is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_FSCACHE is not set
-# CONFIG_CIFS_NFSD_EXPORT is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_SMB2 is not set
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_STATS2 is not set
-# CONFIG_CIFS_SWN_UPCALL is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-CONFIG_CIFS_XATTR=y
-# CONFIG_CIO_DAC is not set
-# CONFIG_CLEANCACHE is not set
-# CONFIG_CLKSRC_PISTACHIO is not set
-# CONFIG_CLKSRC_VERSATILE is not set
-# CONFIG_CLK_GFM_LPASS_SM8250 is not set
-# CONFIG_CLK_HSDK is not set
-# CONFIG_CLK_ICST is not set
-# CONFIG_CLK_QORIQ is not set
-# CONFIG_CLK_SP810 is not set
-# CONFIG_CLOCK_THERMAL is not set
-CONFIG_CLS_U32_MARK=y
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CM32181 is not set
-# CONFIG_CM3232 is not set
-# CONFIG_CM3323 is not set
-# CONFIG_CM3605 is not set
-# CONFIG_CM36651 is not set
-# CONFIG_CMA is not set
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_CMDLINE_EXTEND is not set
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
-# CONFIG_CMDLINE_PARTITION is not set
-# CONFIG_CNIC is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_COMEDI is not set
-# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
-# CONFIG_COMMON_CLK_BOSTON is not set
-# CONFIG_COMMON_CLK_CDCE706 is not set
-# CONFIG_COMMON_CLK_CDCE925 is not set
-# CONFIG_COMMON_CLK_CS2000_CP is not set
-# CONFIG_COMMON_CLK_FIXED_MMIO is not set
-# CONFIG_COMMON_CLK_IPROC is not set
-# CONFIG_COMMON_CLK_MAX9485 is not set
-# CONFIG_COMMON_CLK_MT6765 is not set
-# CONFIG_COMMON_CLK_MT8167 is not set
-# CONFIG_COMMON_CLK_MT8167_AUDSYS is not set
-# CONFIG_COMMON_CLK_MT8167_IMGSYS is not set
-# CONFIG_COMMON_CLK_MT8167_MFGCFG is not set
-# CONFIG_COMMON_CLK_MT8167_MMSYS is not set
-# CONFIG_COMMON_CLK_MT8167_VDECSYS is not set
-# CONFIG_COMMON_CLK_MT8192 is not set
-# CONFIG_COMMON_CLK_NXP is not set
-# CONFIG_COMMON_CLK_PIC32 is not set
-# CONFIG_COMMON_CLK_PISTACHIO is not set
-# CONFIG_COMMON_CLK_PWM is not set
-# CONFIG_COMMON_CLK_PXA is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_COMMON_CLK_RP1 is not set
-# CONFIG_COMMON_CLK_RP1_SDIO  is not set
-# CONFIG_COMMON_CLK_RS9_PCIE is not set
-# CONFIG_COMMON_CLK_SI514 is not set
-# CONFIG_COMMON_CLK_SI5341 is not set
-# CONFIG_COMMON_CLK_SI5351 is not set
-# CONFIG_COMMON_CLK_SI544 is not set
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMMON_CLK_VC5 is not set
-# CONFIG_COMMON_CLK_VC7 is not set
-# CONFIG_COMMON_CLK_XGENE is not set
-# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
-CONFIG_COMPACTION=y
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_COMPAT is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_COMPILE_TEST is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
-CONFIG_CONSOLE_LOGLEVEL_QUIET=4
-CONFIG_CONSTRUCTORS=y
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_COPS is not set
-# CONFIG_CORDIC is not set
-# CONFIG_COREDUMP is not set
-# CONFIG_CORESIGHT is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CORTINA_PHY is not set
-# CONFIG_COUNTER is not set
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_THERMAL is not set
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-# CONFIG_CPU_IDLE_GOV_MENU is not set
-# CONFIG_CPU_IDLE_GOV_TEO is not set
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CPU_ISOLATION is not set
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_NO_EFFICIENT_FFS is not set
-CONFIG_CPU_SW_DOMAIN_PAN=y
-# CONFIG_CPU_THERMAL is not set
-# CONFIG_CRAMFS is not set
-CONFIG_CRAMFS_BLOCKDEV=y
-# CONFIG_CRAMFS_MTD is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_BIT is not set
-# CONFIG_CRC32_SARWATE is not set
-# CONFIG_CRC32_SELFTEST is not set
-# CONFIG_CRC32_SLICEBY4 is not set
-CONFIG_CRC32_SLICEBY8=y
-# CONFIG_CRC4 is not set
-# CONFIG_CRC64 is not set
-# CONFIG_CRC64_ROCKSOFT is not set
-# CONFIG_CRC7 is not set
-# CONFIG_CRC8 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSS_COMPILE=""
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_842 is not set
-CONFIG_CRYPTO_ACOMP2=y
-# CONFIG_CRYPTO_ADIANTUM is not set
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-# CONFIG_CRYPTO_AEGIS128 is not set
-# CONFIG_CRYPTO_AEGIS128L is not set
-# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS256 is not set
-# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_AES_ARM is not set
-# CONFIG_CRYPTO_AES_ARM64 is not set
-# CONFIG_CRYPTO_AES_ARM64_BS is not set
-# CONFIG_CRYPTO_AES_ARM64_CE is not set
-# CONFIG_CRYPTO_AES_ARM64_CE_BLK is not set
-# CONFIG_CRYPTO_AES_ARM64_CE_CCM is not set
-# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
-# CONFIG_CRYPTO_AES_ARM_BS is not set
-# CONFIG_CRYPTO_AES_ARM_CE is not set
-# CONFIG_CRYPTO_AES_NI_INTEL is not set
-# CONFIG_CRYPTO_AES_TI is not set
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_ARIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_BLAKE2B is not set
-# CONFIG_CRYPTO_BLAKE2B_NEON is not set
-# CONFIG_CRYPTO_BLAKE2S_ARM is not set
-# CONFIG_CRYPTO_BLAKE2S_X86 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-CONFIG_CRYPTO_CCM=y
-# CONFIG_CRYPTO_CFB is not set
-# CONFIG_CRYPTO_CHACHA20 is not set
-# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_CHACHA20_NEON is not set
-# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
-# CONFIG_CRYPTO_CHACHA_MIPS is not set
-# CONFIG_CRYPTO_CMAC is not set
-# CONFIG_CRYPTO_CRC32 is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRC32_ARM_CE is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
-# CONFIG_CRYPTO_CRCT10DIF_ARM64_CE is not set
-# CONFIG_CRYPTO_CRCT10DIF_ARM_CE is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_CTR=y
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_CURVE25519 is not set
-# CONFIG_CRYPTO_CURVE25519_NEON is not set
-# CONFIG_CRYPTO_CURVE25519_X86 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
-# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
-# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
-# CONFIG_CRYPTO_DEV_CCP is not set
-# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
-# CONFIG_CRYPTO_DEV_CCREE is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_HISI_SEC is not set
-# CONFIG_CRYPTO_DEV_HISI_ZIP is not set
-# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
-# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
-# CONFIG_CRYPTO_DEV_MEDIATEK is not set
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_MXC_SCC is not set
-# CONFIG_CRYPTO_DEV_MXS_DCP is not set
-# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
-# CONFIG_CRYPTO_DEV_OCTEONTX_CPT is not set
-# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
-# CONFIG_CRYPTO_DEV_QAT_C62X is not set
-# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
-# CONFIG_CRYPTO_DEV_QCE is not set
-# CONFIG_CRYPTO_DEV_S5P is not set
-# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
-# CONFIG_CRYPTO_DEV_SAHARA is not set
-# CONFIG_CRYPTO_DEV_SP_PSP is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_CRYPTO_DEV_VIRTIO is not set
-# CONFIG_CRYPTO_DH is not set
-# CONFIG_CRYPTO_DRBG_CTR is not set
-# CONFIG_CRYPTO_DRBG_HASH is not set
-# CONFIG_CRYPTO_DRBG_MENU is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_ECDH is not set
-# CONFIG_CRYPTO_ECDSA is not set
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_ECRDSA is not set
-# CONFIG_CRYPTO_ESSIV is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH=y
-# CONFIG_CRYPTO_GHASH_ARM64_CE is not set
-# CONFIG_CRYPTO_GHASH_ARM_CE is not set
-# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_HCTR2 is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_JITTERENTROPY is not set
-# CONFIG_CRYPTO_KEYWRAP is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-CONFIG_CRYPTO_KPP=y
-CONFIG_CRYPTO_KPP2=y
-CONFIG_CRYPTO_LIB_AES=y
-CONFIG_CRYPTO_LIB_ARC4=y
-# CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC is not set
-# CONFIG_CRYPTO_LIB_CHACHA is not set
-# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_LIB_CURVE25519 is not set
-# CONFIG_CRYPTO_LIB_POLY1305 is not set
-CONFIG_CRYPTO_LIB_POLY1305_RSIZE=9
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZ4 is not set
-# CONFIG_CRYPTO_LZ4HC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_MCRYPTD is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_MORUS1280 is not set
-# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
-# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
-# CONFIG_CRYPTO_MORUS640 is not set
-# CONFIG_CRYPTO_MORUS640_SSE2 is not set
-# CONFIG_CRYPTO_NHPOLY1305_NEON is not set
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-# CONFIG_CRYPTO_OFB is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PCOMP is not set
-# CONFIG_CRYPTO_PCOMP2 is not set
-CONFIG_CRYPTO_PCRYPT=y
-# CONFIG_CRYPTO_POLY1305 is not set
-# CONFIG_CRYPTO_POLY1305_ARM is not set
-# CONFIG_CRYPTO_POLY1305_MIPS is not set
-# CONFIG_CRYPTO_POLY1305_NEON is not set
-# CONFIG_CRYPTO_POLY1305_X86_64 is not set
-# CONFIG_CRYPTO_POLYVAL_ARM64_CE is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RNG is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA1_ARM is not set
-# CONFIG_CRYPTO_SHA1_ARM64_CE is not set
-# CONFIG_CRYPTO_SHA1_ARM_CE is not set
-# CONFIG_CRYPTO_SHA1_ARM_NEON is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA256_ARM is not set
-# CONFIG_CRYPTO_SHA256_ARM64 is not set
-# CONFIG_CRYPTO_SHA2_ARM64_CE is not set
-# CONFIG_CRYPTO_SHA2_ARM_CE is not set
-# CONFIG_CRYPTO_SHA3 is not set
-# CONFIG_CRYPTO_SHA3_ARM64 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_SHA512_ARM is not set
-# CONFIG_CRYPTO_SHA512_ARM64 is not set
-# CONFIG_CRYPTO_SHA512_ARM64_CE is not set
-# CONFIG_CRYPTO_SIMD is not set
-CONFIG_CRYPTO_SKCIPHER=y
-CONFIG_CRYPTO_SKCIPHER2=y
-# CONFIG_CRYPTO_SM2 is not set
-# CONFIG_CRYPTO_SM3 is not set
-# CONFIG_CRYPTO_SM3_ARM64_CE is not set
-# CONFIG_CRYPTO_SM3_GENERIC is not set
-# CONFIG_CRYPTO_SM3_NEON is not set
-# CONFIG_CRYPTO_SM4 is not set
-# CONFIG_CRYPTO_SM4_ARM64_CE is not set
-# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
-# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
-# CONFIG_CRYPTO_SM4_GENERIC is not set
-# CONFIG_CRYPTO_SPECK is not set
-# CONFIG_CRYPTO_STATS is not set
-# CONFIG_CRYPTO_STREEBOG is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_USER is not set
-# CONFIG_CRYPTO_USER_API_AEAD is not set
-# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_RNG is not set
-# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-# CONFIG_CRYPTO_VMAC is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_XXHASH is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_ZSTD is not set
-# CONFIG_CS5535_MFGPT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_CS89x0_PLATFORM is not set
-# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
-# CONFIG_CUSE is not set
-# CONFIG_CW1200 is not set
-# CONFIG_CXD2880_SPI_DRV is not set
-# CONFIG_CXL_AFU_DRIVER_OPS is not set
-# CONFIG_CXL_BASE is not set
-# CONFIG_CXL_BUS is not set
-# CONFIG_CXL_EEH is not set
-# CONFIG_CXL_KERNEL_API is not set
-# CONFIG_CXL_LIB is not set
-# CONFIG_CYPRESS_FIRMWARE is not set
-# CONFIG_DA280 is not set
-# CONFIG_DA311 is not set
-# CONFIG_DAMON is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_DAX is not set
-# CONFIG_DCB is not set
-# CONFIG_DDR is not set
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_EFI is not set
-# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set
-# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_FS_ALLOW_ALL=y
-# CONFIG_DEBUG_FS_ALLOW_NONE is not set
-# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_INFO_BTF is not set
-# CONFIG_DEBUG_INFO_COMPRESSED is not set
-# CONFIG_DEBUG_INFO_DWARF4 is not set
-# CONFIG_DEBUG_INFO_DWARF5 is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_DEBUG_INFO_NONE is not set
-# CONFIG_DEBUG_INFO_REDUCED is not set
-# CONFIG_DEBUG_INFO_SPLIT is not set
-# CONFIG_DEBUG_IRQFLAGS is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KMAP_LOCAL is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_KOBJECT_RELEASE is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MAPLE_TREE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_MISC is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NET is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_PAGE_REF is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_PLIST is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RODATA_TEST is not set
-# CONFIG_DEBUG_RSEQ is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-# CONFIG_DEBUG_SEMIHOSTING is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
-# CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
-# CONFIG_DEBUG_UART_8250_WORD is not set
-# CONFIG_DEBUG_UART_BCM63XX is not set
-# CONFIG_DEBUG_UART_FLOW_CONTROL is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VM_PGFLAGS is not set
-# CONFIG_DEBUG_VM_PGTABLE is not set
-# CONFIG_DEBUG_VM_RB is not set
-# CONFIG_DEBUG_VM_VMACACHE is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_WX is not set
-# CONFIG_DEBUG_ZBOOT is not set
-# CONFIG_DECNET is not set
-# CONFIG_DEFAULT_CODEL is not set
-CONFIG_DEFAULT_CUBIC=y
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_FQ is not set
-CONFIG_DEFAULT_FQ_CODEL=y
-# CONFIG_DEFAULT_FQ_PIE is not set
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
-CONFIG_DEFAULT_INIT=""
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_DEFAULT_NET_SCH="fq_codel"
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_PFIFO_FAST is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEFAULT_SECURITY_DAC=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SFQ is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
-# CONFIG_DELL_LAPTOP is not set
-# CONFIG_DELL_RBTN is not set
-# CONFIG_DELL_SMBIOS is not set
-# CONFIG_DELL_SMO8800 is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_DEVMEM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_DEVTMPFS is not set
-# CONFIG_DEVTMPFS_MOUNT is not set
-# CONFIG_DEVTMPFS_SAFE is not set
-# CONFIG_DEV_DAX is not set
-# CONFIG_DGAP is not set
-# CONFIG_DGNC is not set
-# CONFIG_DHT11 is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
-# CONFIG_DISPLAY_CONNECTOR_DVI is not set
-# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
-# CONFIG_DISPLAY_ENCODER_TFP410 is not set
-# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
-# CONFIG_DISPLAY_PANEL_DPI is not set
-# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLHL60D is not set
-# CONFIG_DLM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DM9051 is not set
-# CONFIG_DMABUF_DEBUG is not set
-# CONFIG_DMABUF_HEAPS is not set
-# CONFIG_DMABUF_MOVE_NOTIFY is not set
-# CONFIG_DMABUF_SELFTESTS is not set
-# CONFIG_DMABUF_SYSFS_STATS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMARD06 is not set
-# CONFIG_DMARD09 is not set
-# CONFIG_DMARD10 is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DMA_API_DEBUG is not set
-CONFIG_DMA_COHERENT_POOL=y
-CONFIG_DMA_DECLARE_COHERENT=y
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DMA_FENCE_TRACE is not set
-# CONFIG_DMA_JZ4780 is not set
-# CONFIG_DMA_MAP_BENCHMARK is not set
-CONFIG_DMA_NONCOHERENT_MMAP=y
-# CONFIG_DMA_NOOP_OPS is not set
-# CONFIG_DMA_PERNUMA_CMA is not set
-# CONFIG_DMA_RESTRICTED_POOL is not set
-# CONFIG_DMA_SHARED_BUFFER is not set
-# CONFIG_DMA_VIRT_OPS is not set
-# CONFIG_DM_CACHE is not set
-# CONFIG_DM_CLONE is not set
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_DUST is not set
-# CONFIG_DM_EBS is not set
-# CONFIG_DM_ERA is not set
-# CONFIG_DM_FLAKEY is not set
-# CONFIG_DM_INTEGRITY is not set
-# CONFIG_DM_LOG_USERSPACE is not set
-# CONFIG_DM_LOG_WRITES is not set
-# CONFIG_DM_MQ_DEFAULT is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_RAID is not set
-# CONFIG_DM_SWITCH is not set
-# CONFIG_DM_THIN_PROVISIONING is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_DM_UNSTRIPED is not set
-# CONFIG_DM_VERITY is not set
-# CONFIG_DM_WRITECACHE is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DNS_RESOLVER is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_DP83640_PHY is not set
-# CONFIG_DP83822_PHY is not set
-# CONFIG_DP83848_PHY is not set
-# CONFIG_DP83867_PHY is not set
-# CONFIG_DP83869_PHY is not set
-# CONFIG_DP83TC811_PHY is not set
-# CONFIG_DP83TD510_PHY is not set
-# CONFIG_DPOT_DAC is not set
-# CONFIG_DPS310 is not set
-CONFIG_DQL=y
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_DRM is not set
-# CONFIG_DRM_AMDGPU is not set
-# CONFIG_DRM_AMDGPU_CIK is not set
-# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
-# CONFIG_DRM_AMDGPU_SI is not set
-# CONFIG_DRM_AMDGPU_USERPTR is not set
-# CONFIG_DRM_AMD_ACP is not set
-# CONFIG_DRM_AMD_DC_DCN2_0 is not set
-# CONFIG_DRM_AMD_DC_DCN3_0 is not set
-# CONFIG_DRM_AMD_DC_HDCP is not set
-# CONFIG_DRM_AMD_DC_SI is not set
-# CONFIG_DRM_AMD_SECURE_DISPLAY is not set
-# CONFIG_DRM_ANALOGIX_ANX6345 is not set
-# CONFIG_DRM_ANALOGIX_ANX7625 is not set
-# CONFIG_DRM_ANALOGIX_ANX78XX is not set
-# CONFIG_DRM_ARCPGU is not set
-# CONFIG_DRM_ARMADA is not set
-# CONFIG_DRM_AST is not set
-# CONFIG_DRM_ATMEL_HLCDC is not set
-# CONFIG_DRM_BOCHS is not set
-# CONFIG_DRM_CDNS_DSI is not set
-# CONFIG_DRM_CDNS_MHDP8546 is not set
-# CONFIG_DRM_CHIPONE_ICN6211 is not set
-# CONFIG_DRM_CHRONTEL_CH7033 is not set
-# CONFIG_DRM_CIRRUS_QEMU is not set
-# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
-# CONFIG_DRM_DEBUG_MM is not set
-# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
-# CONFIG_DRM_DEBUG_SELFTEST is not set
-# CONFIG_DRM_DISPLAY_CONNECTOR is not set
-# CONFIG_DRM_DP_AUX_CHARDEV is not set
-# CONFIG_DRM_DP_CEC is not set
-# CONFIG_DRM_DUMB_VGA_DAC is not set
-# CONFIG_DRM_DW_HDMI_CEC is not set
-# CONFIG_DRM_ETNAVIV is not set
-# CONFIG_DRM_EXYNOS is not set
-# CONFIG_DRM_FBDEV_EMULATION is not set
-# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
-# CONFIG_DRM_FSL_DCU is not set
-# CONFIG_DRM_GM12U320 is not set
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_GUD is not set
-# CONFIG_DRM_HDLCD is not set
-# CONFIG_DRM_HISI_HIBMC is not set
-# CONFIG_DRM_HISI_KIRIN is not set
-# CONFIG_DRM_I2C_ADV7511 is not set
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_NXP_TDA9950 is not set
-# CONFIG_DRM_I2C_NXP_TDA998X is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-# CONFIG_DRM_I915 is not set
-# CONFIG_DRM_IMX_LCDIF is not set
-# CONFIG_DRM_ITE_IT6505 is not set
-# CONFIG_DRM_ITE_IT66121 is not set
-# CONFIG_DRM_KOMEDA is not set
-# CONFIG_DRM_LEGACY is not set
-# CONFIG_DRM_LIB_RANDOM is not set
-# CONFIG_DRM_LIMA is not set
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-# CONFIG_DRM_LOGICVC is not set
-# CONFIG_DRM_LONTIUM_LT8912B is not set
-# CONFIG_DRM_LONTIUM_LT9211 is not set
-# CONFIG_DRM_LONTIUM_LT9611 is not set
-# CONFIG_DRM_LONTIUM_LT9611UXC is not set
-# CONFIG_DRM_LVDS_CODEC is not set
-# CONFIG_DRM_LVDS_ENCODER is not set
-# CONFIG_DRM_MALI_DISPLAY is not set
-# CONFIG_DRM_MCDE is not set
-# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
-# CONFIG_DRM_MGAG200 is not set
-# CONFIG_DRM_MXSFB is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_NWL_MIPI_DSI is not set
-# CONFIG_DRM_NXP_PTN3460 is not set
-# CONFIG_DRM_OMAP is not set
-# CONFIG_DRM_PANEL_ABT_Y030XX067A is not set
-# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
-# CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
-# CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0 is not set
-# CONFIG_DRM_PANEL_BOE_HIMAX8279D is not set
-# CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
-# CONFIG_DRM_PANEL_DSI_CM is not set
-# CONFIG_DRM_PANEL_EBBG_FT8719 is not set
-# CONFIG_DRM_PANEL_EDP is not set
-# CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set
-# CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02 is not set
-# CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D is not set
-# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
-# CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
-# CONFIG_DRM_PANEL_ILITEK_ILI9806E is not set
-# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
-# CONFIG_DRM_PANEL_INNOLUX_EJ030NA is not set
-# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
-# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
-# CONFIG_DRM_PANEL_JDI_R63452 is not set
-# CONFIG_DRM_PANEL_KHADAS_TS050 is not set
-# CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04 is not set
-# CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W is not set
-# CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829 is not set
-# CONFIG_DRM_PANEL_LG_LB035Q02 is not set
-# CONFIG_DRM_PANEL_LG_LG4573 is not set
-# CONFIG_DRM_PANEL_LVDS is not set
-# CONFIG_DRM_PANEL_MANTIX_MLAF057WE51 is not set
-# CONFIG_DRM_PANEL_MIPI_DBI is not set
-# CONFIG_DRM_PANEL_NEC_NL8048HL11 is not set
-# CONFIG_DRM_PANEL_NEWVISION_NV3052C is not set
-# CONFIG_DRM_PANEL_NOVATEK_NT35510 is not set
-# CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set
-# CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
-# CONFIG_DRM_PANEL_NOVATEK_NT36672A is not set
-# CONFIG_DRM_PANEL_NOVATEK_NT39016 is not set
-# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
-# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
-# CONFIG_DRM_PANEL_OSD_OSD101T2587_53TS is not set
-# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
-# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
-# CONFIG_DRM_PANEL_RAYDIUM_RM67191 is not set
-# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-# CONFIG_DRM_PANEL_ROCKTECH_JH057N00900 is not set
-# CONFIG_DRM_PANEL_RONBO_RB070D30 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_DB7430 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6D16D0 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6D27A1 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_SOFEF00 is not set
-# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
-# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS060T1SX01 is not set
-# CONFIG_DRM_PANEL_SIMPLE is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7701 is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7703 is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
-# CONFIG_DRM_PANEL_SONY_ACX424AKP is not set
-# CONFIG_DRM_PANEL_SONY_ACX565AKM is not set
-# CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521 is not set
-# CONFIG_DRM_PANEL_TDO_TL070WSH30 is not set
-# CONFIG_DRM_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DRM_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DRM_PANEL_TPO_TPG110 is not set
-# CONFIG_DRM_PANEL_TPO_Y17P is not set
-# CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA is not set
-# CONFIG_DRM_PANEL_VISIONOX_RM69299 is not set
-# CONFIG_DRM_PANEL_WAVESHARE_TOUCHSCREEN is not set
-# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
-# CONFIG_DRM_PANEL_XINPENG_XPP055C272 is not set
-# CONFIG_DRM_PANFROST is not set
-# CONFIG_DRM_PARADE_PS8622 is not set
-# CONFIG_DRM_PARADE_PS8640 is not set
-# CONFIG_DRM_PL111 is not set
-# CONFIG_DRM_QXL is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_RADEON_USERPTR is not set
-# CONFIG_DRM_RCAR_DW_HDMI is not set
-# CONFIG_DRM_RCAR_LVDS is not set
-# CONFIG_DRM_RCAR_USE_LVDS is not set
-# CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
-# CONFIG_DRM_ROCKCHIP is not set
-# CONFIG_DRM_RP1_DPI is not set
-# CONFIG_DRM_RP1_DSI is not set
-# CONFIG_DRM_RP1_VEC is not set
-# CONFIG_DRM_SII902X is not set
-# CONFIG_DRM_SII9234 is not set
-# CONFIG_DRM_SIL_SII8620 is not set
-# CONFIG_DRM_SIMPLEDRM is not set
-# CONFIG_DRM_SIMPLE_BRIDGE is not set
-# CONFIG_DRM_SSD130X is not set
-# CONFIG_DRM_STI is not set
-# CONFIG_DRM_STM is not set
-# CONFIG_DRM_SUN4I is not set
-# CONFIG_DRM_THINE_THC63LVD1024 is not set
-# CONFIG_DRM_TIDSS is not set
-# CONFIG_DRM_TILCDC is not set
-# CONFIG_DRM_TINYDRM is not set
-# CONFIG_DRM_TI_DLPC3433 is not set
-# CONFIG_DRM_TI_SN65DSI83 is not set
-# CONFIG_DRM_TI_SN65DSI86 is not set
-# CONFIG_DRM_TI_TFP410 is not set
-# CONFIG_DRM_TI_TPD12S015 is not set
-# CONFIG_DRM_TOSHIBA_TC358762 is not set
-# CONFIG_DRM_TOSHIBA_TC358764 is not set
-# CONFIG_DRM_TOSHIBA_TC358767 is not set
-# CONFIG_DRM_TOSHIBA_TC358768 is not set
-# CONFIG_DRM_TOSHIBA_TC358775 is not set
-# CONFIG_DRM_TVE200 is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_DRM_V3D is not set
-# CONFIG_DRM_VBOXVIDEO is not set
-# CONFIG_DRM_VC4_HDMI_CEC is not set
-# CONFIG_DRM_VGEM is not set
-# CONFIG_DRM_VIRTIO_GPU is not set
-# CONFIG_DRM_VKMS is not set
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_DRM_XEN is not set
-# CONFIG_DRM_XEN_FRONTEND is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DS1803 is not set
-# CONFIG_DS4424 is not set
-# CONFIG_DST_CACHE is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-CONFIG_DUMMY_CONSOLE_COLUMNS=80
-CONFIG_DUMMY_CONSOLE_ROWS=25
-# CONFIG_DUMMY_IRQ is not set
-# CONFIG_DVB_A8293 is not set
-# CONFIG_DVB_AF9013 is not set
-# CONFIG_DVB_AF9033 is not set
-# CONFIG_DVB_AS102 is not set
-# CONFIG_DVB_ASCOT2E is not set
-# CONFIG_DVB_ATBM8830 is not set
-# CONFIG_DVB_AU8522_DTV is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
-# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_CX24117 is not set
-# CONFIG_DVB_CX24120 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_CXD2099 is not set
-# CONFIG_DVB_CXD2820R is not set
-# CONFIG_DVB_CXD2841ER is not set
-# CONFIG_DVB_CXD2880 is not set
-# CONFIG_DVB_DDBRIDGE is not set
-# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_DIB8000 is not set
-# CONFIG_DVB_DIB9000 is not set
-# CONFIG_DVB_DRX39XYJ is not set
-# CONFIG_DVB_DRXD is not set
-# CONFIG_DVB_DRXK is not set
-# CONFIG_DVB_DS3000 is not set
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-# CONFIG_DVB_EC100 is not set
-# CONFIG_DVB_FIREDTV is not set
-# CONFIG_DVB_HELENE is not set
-# CONFIG_DVB_HORUS3A is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_ISL6423 is not set
-# CONFIG_DVB_IX2505V is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_LG2160 is not set
-# CONFIG_DVB_LGDT3305 is not set
-# CONFIG_DVB_LGDT3306A is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGS8GL5 is not set
-# CONFIG_DVB_LGS8GXX is not set
-# CONFIG_DVB_LNBH25 is not set
-# CONFIG_DVB_LNBH29 is not set
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_LNBP22 is not set
-# CONFIG_DVB_M88DS3103 is not set
-# CONFIG_DVB_M88RS2000 is not set
-CONFIG_DVB_MAX_ADAPTERS=16
-# CONFIG_DVB_MB86A16 is not set
-# CONFIG_DVB_MB86A20S is not set
-# CONFIG_DVB_MMAP is not set
-# CONFIG_DVB_MN88443X is not set
-# CONFIG_DVB_MN88472 is not set
-# CONFIG_DVB_MN88473 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_MXL5XX is not set
-# CONFIG_DVB_MXL692 is not set
-# CONFIG_DVB_NET is not set
-# CONFIG_DVB_NETUP_UNIDVB is not set
-# CONFIG_DVB_NGENE is not set
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_PLATFORM_DRIVERS is not set
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_PLUTO2 is not set
-# CONFIG_DVB_PT1 is not set
-# CONFIG_DVB_PT3 is not set
-# CONFIG_DVB_RTL2830 is not set
-# CONFIG_DVB_RTL2832 is not set
-# CONFIG_DVB_RTL2832_SDR is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_S5H1411 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_S5H1432 is not set
-# CONFIG_DVB_S921 is not set
-# CONFIG_DVB_SI2165 is not set
-# CONFIG_DVB_SI2168 is not set
-# CONFIG_DVB_SI21XX is not set
-# CONFIG_DVB_SP2 is not set
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STB6100 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STV0297 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_STV0367 is not set
-# CONFIG_DVB_STV0900 is not set
-# CONFIG_DVB_STV090x is not set
-# CONFIG_DVB_STV0910 is not set
-# CONFIG_DVB_STV6110 is not set
-# CONFIG_DVB_STV6110x is not set
-# CONFIG_DVB_STV6111 is not set
-# CONFIG_DVB_TC90522 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_TDA10048 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_TDA10071 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA18271C2DD is not set
-# CONFIG_DVB_TDA665x is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TEST_DRIVERS is not set
-# CONFIG_DVB_TS2020 is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_ULE_DEBUG is not set
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_USB_V2 is not set
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_ZD1301_DEMOD is not set
-# CONFIG_DVB_ZL10036 is not set
-# CONFIG_DVB_ZL10039 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DWC_XLGMAC is not set
-# CONFIG_DWMAC_DWC_QOS_ETH is not set
-# CONFIG_DWMAC_INTEL_PLAT is not set
-# CONFIG_DWMAC_IPQ806X is not set
-# CONFIG_DWMAC_LOONGSON is not set
-# CONFIG_DWMAC_LPC18XX is not set
-# CONFIG_DWMAC_MESON is not set
-# CONFIG_DWMAC_ROCKCHIP is not set
-# CONFIG_DWMAC_SOCFPGA is not set
-# CONFIG_DWMAC_STI is not set
-# CONFIG_DW_AXI_DMAC is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_DW_EDMA is not set
-# CONFIG_DW_EDMA_PCIE is not set
-# CONFIG_DW_WATCHDOG is not set
-# CONFIG_DW_XDATA_PCIE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DYNAMIC_DEBUG_CORE is not set
-# CONFIG_E100 is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_HWTS is not set
-# CONFIG_EARLY_PRINTK_8250 is not set
-# CONFIG_EARLY_PRINTK_USB_XDBC is not set
-# CONFIG_EBC_C384_WDT is not set
-# CONFIG_ECHO is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_EDAC is not set
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
-# CONFIG_EEPROM_EE1004 is not set
-# CONFIG_EEPROM_IDT_89HPESX is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EFI is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_EFI_VARS_PSTORE is not set
-# CONFIG_EFS_FS is not set
-CONFIG_ELFCORE=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EMBEDDED=y
-# CONFIG_EM_TIMER_STI is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENA_ETHERNET is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_ENCX24J600 is not set
-# CONFIG_ENERGY_MODEL is not set
-# CONFIG_ENIC is not set
-# CONFIG_ENVELOPE_DETECTOR is not set
-# CONFIG_EPAPR_PARAVIRT is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_EROFS_FS is not set
-# CONFIG_ET131X is not set
-CONFIG_ETHERNET=y
-# CONFIG_ETHOC is not set
-CONFIG_ETHTOOL_NETLINK=y
-CONFIG_EVENTFD=y
-# CONFIG_EVM is not set
-# CONFIG_EXFAT_FS is not set
-CONFIG_EXPERT=y
-CONFIG_EXPORTFS=y
-# CONFIG_EXPORTFS_BLOCK_OPS is not set
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_DEBUG is not set
-# CONFIG_EXT4_ENCRYPTION is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_EXT4_USE_FOR_EXT2=y
-# CONFIG_EXTCON is not set
-# CONFIG_EXTCON_ADC_JACK is not set
-# CONFIG_EXTCON_ARIZONA is not set
-# CONFIG_EXTCON_AXP288 is not set
-# CONFIG_EXTCON_FSA9480 is not set
-# CONFIG_EXTCON_GPIO is not set
-# CONFIG_EXTCON_INTEL_INT3496 is not set
-# CONFIG_EXTCON_MAX3355 is not set
-# CONFIG_EXTCON_PTN5150 is not set
-# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
-# CONFIG_EXTCON_RT8973A is not set
-# CONFIG_EXTCON_SM5502 is not set
-# CONFIG_EXTCON_USBC_TUSB320 is not set
-# CONFIG_EXTCON_USB_GPIO is not set
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_F2FS_CHECK_FS is not set
-# CONFIG_F2FS_FAULT_INJECTION is not set
-# CONFIG_F2FS_FS is not set
-# CONFIG_F2FS_FS_COMPRESSION is not set
-# CONFIG_F2FS_FS_ENCRYPTION is not set
-# CONFIG_F2FS_FS_POSIX_ACL is not set
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-# CONFIG_F2FS_IOSTAT is not set
-# CONFIG_F2FS_IO_TRACE is not set
-CONFIG_F2FS_STAT_FS=y
-# CONFIG_F2FS_UNFAIR_RWSEM is not set
-# CONFIG_FAILOVER is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_FANOTIFY is not set
-# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_DEFAULT_UTF8 is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FB is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATMEL is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_AUO_K190X is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_BOTH_ENDIAN is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_DA8XX is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_FLEX is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_FSL_DIU is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_IMX is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_MXS is not set
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_NEOMAGIC is not set
-CONFIG_FB_NOTIFY=y
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_OMAP2 is not set
-# CONFIG_FB_OPENCORES is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_PS3 is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_RPISENSE is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIMPLE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SM712 is not set
-# CONFIG_FB_SM750 is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_SSD1307 is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TFT is not set
-# CONFIG_FB_TFT_AGM1264K_FL is not set
-# CONFIG_FB_TFT_BD663474 is not set
-# CONFIG_FB_TFT_FBTFT_DEVICE is not set
-# CONFIG_FB_TFT_HX8340BN is not set
-# CONFIG_FB_TFT_HX8347D is not set
-# CONFIG_FB_TFT_HX8353D is not set
-# CONFIG_FB_TFT_HX8357D is not set
-# CONFIG_FB_TFT_ILI9163 is not set
-# CONFIG_FB_TFT_ILI9320 is not set
-# CONFIG_FB_TFT_ILI9325 is not set
-# CONFIG_FB_TFT_ILI9340 is not set
-# CONFIG_FB_TFT_ILI9341 is not set
-# CONFIG_FB_TFT_ILI9481 is not set
-# CONFIG_FB_TFT_ILI9486 is not set
-# CONFIG_FB_TFT_PCD8544 is not set
-# CONFIG_FB_TFT_RA8875 is not set
-# CONFIG_FB_TFT_S6D02A1 is not set
-# CONFIG_FB_TFT_S6D1121 is not set
-# CONFIG_FB_TFT_SEPS525 is not set
-# CONFIG_FB_TFT_SH1106 is not set
-# CONFIG_FB_TFT_SSD1289 is not set
-# CONFIG_FB_TFT_SSD1305 is not set
-# CONFIG_FB_TFT_SSD1306 is not set
-# CONFIG_FB_TFT_SSD1325 is not set
-# CONFIG_FB_TFT_SSD1331 is not set
-# CONFIG_FB_TFT_SSD1351 is not set
-# CONFIG_FB_TFT_ST7735R is not set
-# CONFIG_FB_TFT_ST7789V is not set
-# CONFIG_FB_TFT_TINYLCD is not set
-# CONFIG_FB_TFT_TLS8204 is not set
-# CONFIG_FB_TFT_UC1611 is not set
-# CONFIG_FB_TFT_UC1701 is not set
-# CONFIG_FB_TFT_UPD161704 is not set
-# CONFIG_FB_TFT_WATTEROTT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_FCOE is not set
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_FENCE_TRACE is not set
-# CONFIG_FHANDLE is not set
-CONFIG_FIB_RULES=y
-# CONFIG_FIELDBUS_DEV is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIND_BIT_BENCHMARK is not set
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FM10K is not set
-# CONFIG_FMC is not set
-# CONFIG_FONTS is not set
-# CONFIG_FONT_6x8 is not set
-# CONFIG_FONT_TER16x32 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_FORCE_NR_CPUS is not set
-CONFIG_FORTIFY_SOURCE=y
-# CONFIG_FPGA is not set
-# CONFIG_FPROBE is not set
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_FRONTSWAP is not set
-# CONFIG_FSCACHE is not set
-# CONFIG_FSI is not set
-# CONFIG_FSL_DPAA2_SWITCH is not set
-# CONFIG_FSL_EDMA is not set
-# CONFIG_FSL_ENETC is not set
-# CONFIG_FSL_ENETC_IERB is not set
-# CONFIG_FSL_ENETC_MDIO is not set
-# CONFIG_FSL_ENETC_VF is not set
-# CONFIG_FSL_ERRATUM_A008585 is not set
-# CONFIG_FSL_MC_BUS is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_FSL_QDMA is not set
-# CONFIG_FSL_RCPM is not set
-# CONFIG_FSL_XGMAC_MDIO is not set
-CONFIG_FSNOTIFY=y
-# CONFIG_FS_DAX is not set
-# CONFIG_FS_ENCRYPTION is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FS_VERITY is not set
-# CONFIG_FTGMAC100 is not set
-# CONFIG_FTL is not set
-# CONFIG_FTMAC100 is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FTRACE_RECORD_RECURSION is not set
-# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_FTWDT010_WATCHDOG is not set
-# CONFIG_FUJITSU_ERRATUM_010001 is not set
-# CONFIG_FUJITSU_ES is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_FUJITSU_TABLET is not set
-# CONFIG_FUNCTION_ERROR_INJECTION is not set
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_FUN_ETH is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-CONFIG_FUTEX_PI=y
-# CONFIG_FW_CFG_SYSFS is not set
-CONFIG_FW_LOADER=y
-# CONFIG_FW_LOADER_COMPRESS is not set
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-# CONFIG_FW_UPLOAD is not set
-# CONFIG_FXAS21002C is not set
-# CONFIG_FXLS8962AF_I2C is not set
-# CONFIG_FXLS8962AF_SPI is not set
-# CONFIG_FXOS8700_I2C is not set
-# CONFIG_FXOS8700_SPI is not set
-CONFIG_GACT_PROB=y
-# CONFIG_GADGET_UAC1 is not set
-# CONFIG_GAMEPORT is not set
-# CONFIG_GATEWORKS_GW16083 is not set
-# CONFIG_GCC_PLUGINS is not set
-# CONFIG_GCOV is not set
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_GDB_SCRIPTS is not set
-# CONFIG_GEMINI_ETHERNET is not set
-# CONFIG_GENERIC_ADC_BATTERY is not set
-# CONFIG_GENERIC_ADC_THERMAL is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_IRQ_DEBUGFS is not set
-CONFIG_GENERIC_IRQ_IPI=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_NET_UTILS=y
-# CONFIG_GENERIC_PHY is not set
-CONFIG_GENERIC_PTDUMP=y
-CONFIG_GENERIC_VDSO_TIME_NS=y
-# CONFIG_GENEVE is not set
-# CONFIG_GENWQE is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_GIGASET_CAPI is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GIGASET_DUMMYLL is not set
-# CONFIG_GLOB_SELFTEST is not set
-# CONFIG_GNSS is not set
-# CONFIG_GOLDFISH is not set
-# CONFIG_GOOGLE_FIRMWARE is not set
-# CONFIG_GOOGLE_FRAMEBUFFER_COREBOOT is not set
-# CONFIG_GOOGLE_MEMCONSOLE_X86_LEGACY is not set
-# CONFIG_GOOGLE_SMI is not set
-# CONFIG_GP2AP002 is not set
-# CONFIG_GP2AP020A00F is not set
-# CONFIG_GPD_POCKET_FAN is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_FASTPATH_LIMIT=512
-# CONFIG_GPIO_104_DIO_48E is not set
-# CONFIG_GPIO_104_IDIO_16 is not set
-# CONFIG_GPIO_104_IDI_48 is not set
-# CONFIG_GPIO_74X164 is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_GPIO_ADP5588 is not set
-# CONFIG_GPIO_AGGREGATOR is not set
-# CONFIG_GPIO_ALTERA is not set
-# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_AMDPT is not set
-# CONFIG_GPIO_AMD_FCH is not set
-# CONFIG_GPIO_BCM_KONA is not set
-# CONFIG_GPIO_BRCMSTB is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_CADENCE is not set
-# CONFIG_GPIO_CASCADE is not set
-# CONFIG_GPIO_CDEV is not set
-# CONFIG_GPIO_CDEV_V1 is not set
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_DWAPB is not set
-# CONFIG_GPIO_EM is not set
-# CONFIG_GPIO_EXAR is not set
-# CONFIG_GPIO_F7188X is not set
-# CONFIG_GPIO_FTGPIO010 is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_GPIO_MM is not set
-# CONFIG_GPIO_GRGPIO is not set
-# CONFIG_GPIO_GW_PLD is not set
-# CONFIG_GPIO_HLWD is not set
-# CONFIG_GPIO_ICH is not set
-# CONFIG_GPIO_IT87 is not set
-# CONFIG_GPIO_LOGICVC is not set
-# CONFIG_GPIO_LYNXPOINT is not set
-# CONFIG_GPIO_MAX3191X is not set
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MB86S7X is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_MOCKUP is not set
-# CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCA953X_IRQ is not set
-# CONFIG_GPIO_PCA9570 is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_PCH is not set
-# CONFIG_GPIO_PCIE_IDIO_24 is not set
-# CONFIG_GPIO_PCI_IDIO_16 is not set
-# CONFIG_GPIO_PISOSR is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_PWM is not set
-# CONFIG_GPIO_RCAR is not set
-# CONFIG_GPIO_RDC321X is not set
-# CONFIG_GPIO_SAMA5D2_PIOBU is not set
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_SCH311X is not set
-# CONFIG_GPIO_SIFIVE is not set
-# CONFIG_GPIO_SIM is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SYSCON is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GPIO_TPIC2810 is not set
-# CONFIG_GPIO_TS4900 is not set
-# CONFIG_GPIO_TS5500 is not set
-# CONFIG_GPIO_VF610 is not set
-# CONFIG_GPIO_VIRTIO is not set
-# CONFIG_GPIO_VX855 is not set
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_GPIO_WINBOND is not set
-# CONFIG_GPIO_WS16C48 is not set
-# CONFIG_GPIO_XGENE is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_XRA1403 is not set
-# CONFIG_GPIO_ZEVIO is not set
-# CONFIG_GPIO_ZX is not set
-# CONFIG_GP_PCI1XXXX is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GREYBUS is not set
-# CONFIG_GS_FPGABOOT is not set
-# CONFIG_GTP is not set
-# CONFIG_GUP_BENCHMARK is not set
-# CONFIG_GUP_TEST is not set
-# CONFIG_GVE is not set
-# CONFIG_HABANA_AI is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_HAPPYMEAL is not set
-CONFIG_HARDENED_USERCOPY=y
-# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
-# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
-CONFIG_HARDEN_BRANCH_HISTORY=y
-CONFIG_HARDEN_EL2_VECTORS=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_HAVE_ARM_ARCH_TIMER is not set
-# CONFIG_HCALL_STATS is not set
-# CONFIG_HDC100X is not set
-# CONFIG_HDC2010 is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDMI_LPE_AUDIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HEADERS_INSTALL is not set
-# CONFIG_HEADER_TEST is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFS_FS_POSIX_ACL is not set
-# CONFIG_HI6421V600_IRQ is not set
-# CONFIG_HI8435 is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_HID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACCUTOUCH is not set
-# CONFIG_HID_ACRUX is not set
-# CONFIG_HID_ACRUX_FF is not set
-# CONFIG_HID_ALPS is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_APPLEIR is not set
-# CONFIG_HID_ASUS is not set
-# CONFIG_HID_AUREAL is not set
-# CONFIG_HID_BATTERY_STRENGTH is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BETOP_FF is not set
-# CONFIG_HID_BIGBEN_FF is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CMEDIA is not set
-# CONFIG_HID_CORSAIR is not set
-# CONFIG_HID_COUGAR is not set
-# CONFIG_HID_CP2112 is not set
-# CONFIG_HID_CREATIVE_SB0540 is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_ELAN is not set
-# CONFIG_HID_ELECOM is not set
-# CONFIG_HID_ELO is not set
-# CONFIG_HID_EMS_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_FT260 is not set
-# CONFIG_HID_GEMBIRD is not set
-# CONFIG_HID_GENERIC is not set
-# CONFIG_HID_GFRM is not set
-# CONFIG_HID_GLORIOUS is not set
-# CONFIG_HID_GOOGLE_HAMMER is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_GT683R is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_HOLTEK is not set
-# CONFIG_HID_ICADE is not set
-# CONFIG_HID_ITE is not set
-# CONFIG_HID_JABRA is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_KEYTOUCH is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_LCPOWER is not set
-# CONFIG_HID_LED is not set
-# CONFIG_HID_LENOVO is not set
-# CONFIG_HID_LETSKETCH is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_LOGITECH_DJ is not set
-# CONFIG_HID_LOGITECH_HIDPP is not set
-# CONFIG_HID_MACALLY is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MALTRON is not set
-# CONFIG_HID_MAYFLASH is not set
-# CONFIG_HID_MCP2221 is not set
-# CONFIG_HID_MEGAWORLD_FF is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_HID_NINTENDO is not set
-# CONFIG_HID_NTI is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PENMOUNT is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HID_PLANTRONICS is not set
-# CONFIG_HID_PLAYSTATION is not set
-# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_PXRC is not set
-# CONFIG_HID_RAZER is not set
-# CONFIG_HID_REDRAGON is not set
-# CONFIG_HID_RETRODE is not set
-# CONFIG_HID_RMI is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_SAITEK is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SEMITEK is not set
-# CONFIG_HID_SENSOR_HUB is not set
-# CONFIG_HID_SIGMAMICRO is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SPEEDLINK is not set
-# CONFIG_HID_STEAM is not set
-# CONFIG_HID_STEELSERIES is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_THINGM is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_TIVO is not set
-# CONFIG_HID_TOPRE is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_U2FZERO is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_UDRAW_PS3 is not set
-# CONFIG_HID_VIEWSONIC is not set
-# CONFIG_HID_VIVALDI is not set
-# CONFIG_HID_VRC2 is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_WIIMOTE is not set
-# CONFIG_HID_XIAOMI is not set
-# CONFIG_HID_XINMO is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HINIC is not set
-# CONFIG_HIP04_ETH is not set
-# CONFIG_HIPPI is not set
-# CONFIG_HISILICON_ERRATUM_161010101 is not set
-# CONFIG_HISILICON_ERRATUM_161600802 is not set
-# CONFIG_HISI_DMA is not set
-# CONFIG_HISI_FEMAC is not set
-# CONFIG_HISI_HIKEY_USB is not set
-# CONFIG_HISI_PCIE_PMU is not set
-# CONFIG_HISI_PTT is not set
-# CONFIG_HIST_TRIGGERS_DEBUG is not set
-# CONFIG_HIX5HD2_GMAC is not set
-# CONFIG_HMC425 is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_HNS is not set
-# CONFIG_HNS3 is not set
-# CONFIG_HNS3_PMU is not set
-# CONFIG_HNS_DSAF is not set
-# CONFIG_HNS_ENET is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP03 is not set
-# CONFIG_HP100 is not set
-# CONFIG_HP206C is not set
-CONFIG_HPET_MMAP_DEFAULT=y
-# CONFIG_HPFS_FS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HP_WATCHDOG is not set
-# CONFIG_HP_WIRELESS is not set
-# CONFIG_HSA_AMD is not set
-# CONFIG_HSI is not set
-# CONFIG_HSR is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTE is not set
-# CONFIG_HTS221 is not set
-# CONFIG_HTU21 is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_HWLAT_TRACER is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWSPINLOCK is not set
-# CONFIG_HWSPINLOCK_OMAP is not set
-CONFIG_HW_PERF_EVENTS=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_ARM_SMCCC_TRNG is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_BA431 is not set
-# CONFIG_HW_RANDOM_BCM2835 is not set
-# CONFIG_HW_RANDOM_CAVIUM is not set
-# CONFIG_HW_RANDOM_CCTRNG is not set
-# CONFIG_HW_RANDOM_CN10K is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
-# CONFIG_HW_RANDOM_MTK is not set
-# CONFIG_HW_RANDOM_OMAP is not set
-# CONFIG_HW_RANDOM_OMAP3_ROM is not set
-# CONFIG_HW_RANDOM_PPC4XX is not set
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_TPM=y
-# CONFIG_HW_RANDOM_VIA is not set
-# CONFIG_HW_RANDOM_VIRTIO is not set
-# CONFIG_HW_RANDOM_XIPHERA is not set
-# CONFIG_HX711 is not set
-# CONFIG_HYPERV is not set
-# CONFIG_HYPERV_TSCPAGE is not set
-# CONFIG_HYSDN is not set
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_200 is not set
-# CONFIG_HZ_24 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_500 is not set
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-# CONFIG_I2C_AU1550 is not set
-# CONFIG_I2C_BCM2835 is not set
-# CONFIG_I2C_BCM_IPROC is not set
-# CONFIG_I2C_BRCMSTB is not set
-# CONFIG_I2C_CADENCE is not set
-# CONFIG_I2C_CBUS_GPIO is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_CP2615 is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEMUX_PINCTRL is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DESIGNWARE_SLAVE is not set
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_EMEV2 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_HID is not set
-# CONFIG_I2C_HID_OF is not set
-# CONFIG_I2C_HID_OF_ELAN is not set
-# CONFIG_I2C_HID_OF_GOODIX is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_IMG is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_ISMT is not set
-# CONFIG_I2C_JZ4780 is not set
-# CONFIG_I2C_MLXCPLD is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_MT65XX is not set
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_MUX_GPIO is not set
-# CONFIG_I2C_MUX_GPMUX is not set
-# CONFIG_I2C_MUX_LTC4306 is not set
-# CONFIG_I2C_MUX_MLXCPLD is not set
-# CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
-# CONFIG_I2C_MUX_PINCTRL is not set
-# CONFIG_I2C_MUX_REG is not set
-# CONFIG_I2C_MV64XXX is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_I2C_NVIDIA_GPU is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OCTEON is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PCI1XXXX is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_I2C_RK3X is not set
-# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
-# CONFIG_I2C_S3C2410 is not set
-# CONFIG_I2C_SCMI is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_SLAVE is not set
-# CONFIG_I2C_SLAVE_EEPROM is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_THUNDERX is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VERSATILE is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VIRTIO is not set
-# CONFIG_I2C_XILINX is not set
-# CONFIG_I3C is not set
-# CONFIG_I40E is not set
-# CONFIG_I40EVF is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IAQCORE is not set
-# CONFIG_IBM_ASM is not set
-# CONFIG_IBM_EMAC_DEBUG is not set
-# CONFIG_IBM_EMAC_EMAC4 is not set
-# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_EMAC_RGMII is not set
-# CONFIG_IBM_EMAC_TAH is not set
-# CONFIG_IBM_EMAC_ZMII is not set
-# CONFIG_ICE is not set
-# CONFIG_ICP10100 is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ICST is not set
-# CONFIG_IDE is not set
-# CONFIG_IDEAPAD_LAPTOP is not set
-# CONFIG_IDE_GD is not set
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDLE_PAGE_TRACKING is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_IEEE802154_ADF7242 is not set
-# CONFIG_IEEE802154_ATUSB is not set
-# CONFIG_IEEE802154_CA8210 is not set
-# CONFIG_IEEE802154_HWSIM is not set
-# CONFIG_IEEE802154_MCR20A is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_IGC is not set
-# CONFIG_IIO is not set
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_BUFFER_CB is not set
-# CONFIG_IIO_BUFFER_DMA is not set
-# CONFIG_IIO_BUFFER_DMAENGINE is not set
-# CONFIG_IIO_BUFFER_HDC2010 is not set
-# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
-# CONFIG_IIO_CONFIGFS is not set
-CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
-# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set
-# CONFIG_IIO_INTERRUPT_TRIGGER is not set
-# CONFIG_IIO_MUX is not set
-# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_RESCALE is not set
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_IIO_SSP_SENSORHUB is not set
-# CONFIG_IIO_ST_ACCEL_3AXIS is not set
-# CONFIG_IIO_ST_GYRO_3AXIS is not set
-# CONFIG_IIO_ST_LSM6DSX is not set
-# CONFIG_IIO_ST_LSM9DS0 is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-# CONFIG_IIO_ST_PRESS is not set
-# CONFIG_IIO_SW_DEVICE is not set
-# CONFIG_IIO_SW_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
-# CONFIG_IIO_TRIGGER is not set
-# CONFIG_IIO_TRIGGERED_EVENT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IKHEADERS is not set
-# CONFIG_IMA is not set
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-# CONFIG_IMGPDC_WDT is not set
-# CONFIG_IMG_MDC_DMA is not set
-# CONFIG_IMX7D_ADC is not set
-# CONFIG_IMX8QXP_ADC is not set
-# CONFIG_IMX_IPUV3_CORE is not set
-# CONFIG_IMX_THERMAL is not set
-# CONFIG_INA2XX_ADC is not set
-# CONFIG_INDIRECT_PIO is not set
-CONFIG_INET=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_ESPINTCP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_ESPINTCP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_TABLE_PERTURB_ORDER=16
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_UDP_DIAG is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-# CONFIG_INGENIC_ADC is not set
-# CONFIG_INGENIC_CGU_JZ4725B is not set
-# CONFIG_INGENIC_CGU_JZ4740 is not set
-# CONFIG_INGENIC_CGU_JZ4760 is not set
-# CONFIG_INGENIC_CGU_JZ4770 is not set
-# CONFIG_INGENIC_CGU_JZ4780 is not set
-# CONFIG_INGENIC_CGU_X1000 is not set
-# CONFIG_INGENIC_CGU_X1830 is not set
-# CONFIG_INGENIC_OST is not set
-# CONFIG_INGENIC_SYSOST is not set
-# CONFIG_INGENIC_TCU_CLK is not set
-# CONFIG_INGENIC_TCU_IRQ is not set
-# CONFIG_INGENIC_TIMER is not set
-# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
-# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
-# CONFIG_INIT_STACK_ALL_PATTERN is not set
-# CONFIG_INIT_STACK_ALL_ZERO is not set
-CONFIG_INIT_STACK_NONE=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
-# CONFIG_INPUT_AXP20X_PEK is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DA7280_HAPTICS is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2665_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
-# CONFIG_INPUT_E3X0_BUTTON is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_DECODER is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_GPIO_VIBRA is not set
-# CONFIG_INPUT_IBM_PANEL is not set
-# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
-# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_IQS269A is not set
-# CONFIG_INPUT_IQS626A is not set
-# CONFIG_INPUT_IQS7222 is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_LEDS is not set
-# CONFIG_INPUT_MATRIXKMAP is not set
-# CONFIG_INPUT_MAX8997_HAPTIC is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_MSM_VIBRATOR is not set
-# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_PM8941_PWRKEY is not set
-# CONFIG_INPUT_PM8XXX_VIBRATOR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_PWM_VIBRA is not set
-# CONFIG_INPUT_RASPBERRYPI_BUTTON is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_TWL6040_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INT340X_THERMAL is not set
-# CONFIG_INTEGRITY is not set
-# CONFIG_INTEGRITY_AUDIT is not set
-# CONFIG_INTEGRITY_SIGNATURE is not set
-# CONFIG_INTEL_ATOMISP2_LED is not set
-# CONFIG_INTEL_ATOMISP2_PM is not set
-# CONFIG_INTEL_CHT_INT33FE is not set
-# CONFIG_INTEL_HID_EVENT is not set
-# CONFIG_INTEL_IDLE is not set
-# CONFIG_INTEL_IDMA64 is not set
-# CONFIG_INTEL_INT0002_VGPIO is not set
-# CONFIG_INTEL_IOATDMA is not set
-# CONFIG_INTEL_ISH_HID is not set
-# CONFIG_INTEL_MEI is not set
-# CONFIG_INTEL_MEI_ME is not set
-# CONFIG_INTEL_MEI_TXE is not set
-# CONFIG_INTEL_MIC_CARD is not set
-# CONFIG_INTEL_MIC_HOST is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_INTEL_OAKTRAIL is not set
-# CONFIG_INTEL_PMC_CORE is not set
-# CONFIG_INTEL_PUNIT_IPC is not set
-# CONFIG_INTEL_RST is not set
-# CONFIG_INTEL_SMARTCONNECT is not set
-# CONFIG_INTEL_SOC_PMIC is not set
-# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
-# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
-# CONFIG_INTEL_TH is not set
-# CONFIG_INTEL_VBTN is not set
-# CONFIG_INTEL_XWAY_PHY is not set
-# CONFIG_INTERCONNECT is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_INV_ICM42600_I2C is not set
-# CONFIG_INV_ICM42600_SPI is not set
-# CONFIG_INV_MPU6050_I2C is not set
-# CONFIG_INV_MPU6050_IIO is not set
-# CONFIG_INV_MPU6050_SPI is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_IONIC is not set
-# CONFIG_IOSCHED_BFQ is not set
-# CONFIG_IOSM is not set
-CONFIG_IO_STRICT_DEVMEM=y
-# CONFIG_IO_URING is not set
-CONFIG_IO_WQ=y
-# CONFIG_IP17XX_PHY is not set
-# CONFIG_IP5XXX_POWER is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_SRH is not set
-# CONFIG_IP6_NF_NAT is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
-# CONFIG_IPACK_BUS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_IPMB_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_FOU is not set
-# CONFIG_IPV6_FOU_TUNNEL is not set
-# CONFIG_IPV6_ILA is not set
-# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_RPL_LWTUNNEL is not set
-# CONFIG_IPV6_SEG6_HMAC is not set
-# CONFIG_IPV6_SEG6_LWTUNNEL is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_SIT_6RD is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_VTI is not set
-# CONFIG_IPVLAN is not set
-# CONFIG_IPVTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200 is not set
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_FIB_TRIE_STATS is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_SYNPROXY is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_IP_SET is not set
-# CONFIG_IP_SET_HASH_IPMAC is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IP_VS_MH is not set
-CONFIG_IP_VS_MH_TAB_INDEX=10
-# CONFIG_IP_VS_TWOS is not set
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_IRQ_POLL is not set
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_IR_GPIO_CIR is not set
-# CONFIG_IR_HIX5HD2 is not set
-# CONFIG_IR_IGORPLUGUSB is not set
-# CONFIG_IR_IGUANA is not set
-# CONFIG_IR_IMG is not set
-# CONFIG_IR_IMON is not set
-# CONFIG_IR_IMON_RAW is not set
-# CONFIG_IR_JVC_DECODER is not set
-# CONFIG_IR_LIRC_CODEC is not set
-# CONFIG_IR_MCEUSB is not set
-# CONFIG_IR_NEC_DECODER is not set
-# CONFIG_IR_RC5_DECODER is not set
-# CONFIG_IR_RC6_DECODER is not set
-# CONFIG_IR_REDRAT3 is not set
-# CONFIG_IR_SERIAL is not set
-# CONFIG_IR_SIR is not set
-# CONFIG_IR_SONY_DECODER is not set
-# CONFIG_IR_STREAMZAP is not set
-# CONFIG_IR_TOY is not set
-# CONFIG_IR_TTUSBIR is not set
-# CONFIG_ISA_BUS is not set
-# CONFIG_ISA_BUS_API is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_ISCSI_TCP is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_AUDIO is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_CAPI_CAPIDRV is not set
-# CONFIG_ISDN_DIVERSION is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_DRV_HISAX is not set
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_ISL29125 is not set
-# CONFIG_ISL29501 is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_ISS4xx is not set
-# CONFIG_ITG3200 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IXGB is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_JAILHOUSE_GUEST is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZMA=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_JSA1212 is not set
-# CONFIG_JUMP_LABEL is not set
-# CONFIG_JZ4740_WDT is not set
-# CONFIG_JZ4770_PHY is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_BASE_RELATIVE=y
-# CONFIG_KALLSYMS_UNCOMPRESSED is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KASAN is not set
-# CONFIG_KASAN_MODULE_TEST is not set
-CONFIG_KASAN_STACK=y
-# CONFIG_KCMP is not set
-# CONFIG_KCOV is not set
-CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
-# CONFIG_KCSAN is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_CAT is not set
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_LZ4 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_KERNEL_XZ=y
-# CONFIG_KERNEL_ZSTD is not set
-CONFIG_KERNFS=y
-# CONFIG_KEXEC is not set
-# CONFIG_KEXEC_FILE is not set
-# CONFIG_KEXEC_SIG is not set
-# CONFIG_KEYBOARD_ADC is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-# CONFIG_KEYBOARD_APPLESPI is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_BCM is not set
-# CONFIG_KEYBOARD_CAP11XX is not set
-# CONFIG_KEYBOARD_CYPRESS_SF is not set
-# CONFIG_KEYBOARD_DLINK_DIR685 is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_MT6779 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PINEPHONE is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_QT1050 is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
-# CONFIG_KEYBOARD_STMPE is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_TEGRA is not set
-# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYS is not set
-# CONFIG_KEYS_REQUEST_CACHE is not set
-# CONFIG_KEY_DH_OPERATIONS is not set
-# CONFIG_KFENCE is not set
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_KMX61 is not set
-# CONFIG_KPC2000 is not set
-# CONFIG_KPROBES is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
-# CONFIG_KPROBE_EVENT_GEN_TEST is not set
-# CONFIG_KS7010 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_KSM is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_KUNIT is not set
-CONFIG_KUSER_HELPERS=y
-# CONFIG_KVM_AMD is not set
-# CONFIG_KVM_AMD_SEV is not set
-# CONFIG_KVM_GUEST is not set
-# CONFIG_KVM_INTEL is not set
-# CONFIG_KVM_WERROR is not set
-# CONFIG_KVM_XEN is not set
-# CONFIG_KXCJK1013 is not set
-# CONFIG_KXSD9 is not set
-# CONFIG_L2TP is not set
-# CONFIG_L2TP_ETH is not set
-# CONFIG_L2TP_IP is not set
-# CONFIG_L2TP_V3 is not set
-# CONFIG_LAN743X is not set
-# CONFIG_LAN966X_SWITCH is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LANTIQ is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-CONFIG_LBDAF=y
-# CONFIG_LCD_AMS369FG06 is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_ILI922X is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LMS501KF03 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_OTM3225A is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LDISC_AUTOLOAD=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
-# CONFIG_LD_HEAD_STUB_CATCH is not set
-# CONFIG_LEDS_AN30259A is not set
-# CONFIG_LEDS_APU is not set
-# CONFIG_LEDS_AW2013 is not set
-# CONFIG_LEDS_BCM6328 is not set
-# CONFIG_LEDS_BCM6358 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_BLINKM is not set
-CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_CLASS_FLASH is not set
-CONFIG_LEDS_CLASS_MULTICOLOR=y
-# CONFIG_LEDS_CR0014114 is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_EL15203000 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_INTEL_SS4200 is not set
-# CONFIG_LEDS_IS31FL319X is not set
-# CONFIG_LEDS_IS31FL32XX is not set
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_LM3532 is not set
-# CONFIG_LEDS_LM355x is not set
-# CONFIG_LEDS_LM3642 is not set
-# CONFIG_LEDS_LM3692X is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP3952 is not set
-# CONFIG_LEDS_LP50XX is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_LP5562 is not set
-# CONFIG_LEDS_LP55XX_COMMON is not set
-# CONFIG_LEDS_LP8501 is not set
-# CONFIG_LEDS_LP8860 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_MLXCPLD is not set
-# CONFIG_LEDS_MLXREG is not set
-# CONFIG_LEDS_NIC78BX is not set
-# CONFIG_LEDS_NS2 is not set
-# CONFIG_LEDS_OT200 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA963X is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_PWM_MULTICOLOR is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_SPI_BYTE is not set
-# CONFIG_LEDS_SYSCON is not set
-# CONFIG_LEDS_TCA6507 is not set
-# CONFIG_LEDS_TI_LMU_COMMON is not set
-# CONFIG_LEDS_TLC591XX is not set
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
-# CONFIG_LEDS_TRIGGER_AUDIO is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_CAMERA is not set
-# CONFIG_LEDS_TRIGGER_CPU is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_LEDS_TRIGGER_DISK is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_MTD is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-# CONFIG_LEDS_TRIGGER_ONESHOT is not set
-# CONFIG_LEDS_TRIGGER_PANIC is not set
-# CONFIG_LEDS_TRIGGER_PATTERN is not set
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
-# CONFIG_LEDS_TRIGGER_TTY is not set
-# CONFIG_LEDS_TURRIS_OMNIA is not set
-# CONFIG_LEDS_USER is not set
-# CONFIG_LED_TRIGGER_PHY is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LGUEST is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_LIB80211_CRYPT_CCMP is not set
-# CONFIG_LIB80211_CRYPT_TKIP is not set
-# CONFIG_LIB80211_CRYPT_WEP is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LIBNVDIMM is not set
-CONFIG_LIB_MEMNEQ=y
-# CONFIG_LIDAR_LITE_V2 is not set
-CONFIG_LINEAR_RANGES=y
-# CONFIG_LIQUIDIO is not set
-# CONFIG_LIQUIDIO_VF is not set
-# CONFIG_LIRC is not set
-# CONFIG_LIS3L02DQ is not set
-# CONFIG_LITEX_LITEETH is not set
-# CONFIG_LITEX_SOC_CONTROLLER is not set
-# CONFIG_LIVEPATCH is not set
-# CONFIG_LKDTM is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_LMK04832 is not set
-# CONFIG_LMP91000 is not set
-# CONFIG_LNET is not set
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_LOCKD is not set
-CONFIG_LOCKDEP_BITS=15
-CONFIG_LOCKDEP_CHAINS_BITS=16
-CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
-CONFIG_LOCKDEP_STACK_TRACE_BITS=19
-CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_LOCKD_V4=y
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_LOCK_EVENT_COUNTS is not set
-CONFIG_LOCK_MM_AND_FIND_VMA=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_LOGFS is not set
-# CONFIG_LOGIG940_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIWHEELS_FF is not set
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
-# CONFIG_LOONGSON_MC146818 is not set
-# CONFIG_LPC_ICH is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_LP_CONSOLE is not set
-CONFIG_LRU_GEN=y
-CONFIG_LRU_GEN_ENABLED=y
-# CONFIG_LRU_GEN_STATS is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
-CONFIG_LSM_MMAP_MIN_ADDR=65536
-# CONFIG_LTC1660 is not set
-# CONFIG_LTC2471 is not set
-# CONFIG_LTC2485 is not set
-# CONFIG_LTC2496 is not set
-# CONFIG_LTC2497 is not set
-# CONFIG_LTC2632 is not set
-# CONFIG_LTC2688 is not set
-# CONFIG_LTC2983 is not set
-# CONFIG_LTE_GDM724X is not set
-CONFIG_LTO_NONE=y
-# CONFIG_LTPC is not set
-# CONFIG_LTR501 is not set
-# CONFIG_LTRF216A is not set
-# CONFIG_LUSTRE_FS is not set
-# CONFIG_LV0104CS is not set
-# CONFIG_LWTUNNEL is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_LZ4HC_COMPRESS is not set
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_LZMA_COMPRESS=y
-CONFIG_LZMA_DECOMPRESS=y
-# CONFIG_LZO_COMPRESS is not set
-# CONFIG_LZO_DECOMPRESS is not set
-# CONFIG_M62332 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
-# CONFIG_MACB is not set
-# CONFIG_MACH_ASM9260 is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_INGENIC_SOC is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON2EF is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
-# CONFIG_MACH_NINTENDO64 is not set
-# CONFIG_MACH_PIC32 is not set
-# CONFIG_MACH_PISTACHIO is not set
-# CONFIG_MACH_REALTEK_RTL is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MACH_XILFPGA is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MACSEC is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MACVTAP is not set
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MAG3110 is not set
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
-# CONFIG_MAGIC_SYSRQ_SERIAL is not set
-CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
-# CONFIG_MAILBOX is not set
-# CONFIG_MANAGER_SBS is not set
-# CONFIG_MANDATORY_FILE_LOCKING is not set
-# CONFIG_MANGLE_BOOTARGS is not set
-# CONFIG_MARVELL_10G_PHY is not set
-# CONFIG_MARVELL_88X2222_PHY is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MAX1027 is not set
-# CONFIG_MAX11100 is not set
-# CONFIG_MAX1118 is not set
-# CONFIG_MAX11205 is not set
-# CONFIG_MAX1241 is not set
-# CONFIG_MAX1363 is not set
-# CONFIG_MAX30100 is not set
-# CONFIG_MAX30102 is not set
-# CONFIG_MAX31856 is not set
-# CONFIG_MAX31865 is not set
-# CONFIG_MAX44000 is not set
-# CONFIG_MAX44009 is not set
-# CONFIG_MAX517 is not set
-# CONFIG_MAX5432 is not set
-# CONFIG_MAX5481 is not set
-# CONFIG_MAX5487 is not set
-# CONFIG_MAX5821 is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MAX9611 is not set
-# CONFIG_MAXIM_THERMOCOUPLE is not set
-# CONFIG_MAXLINEAR_GPHY is not set
-CONFIG_MAY_USE_DEVLINK=y
-# CONFIG_MB1232 is not set
-# CONFIG_MC3230 is not set
-# CONFIG_MCB is not set
-# CONFIG_MCP320X is not set
-# CONFIG_MCP3422 is not set
-# CONFIG_MCP3911 is not set
-# CONFIG_MCP4018 is not set
-# CONFIG_MCP41010 is not set
-# CONFIG_MCP4131 is not set
-# CONFIG_MCP4531 is not set
-# CONFIG_MCP4725 is not set
-# CONFIG_MCP4922 is not set
-# CONFIG_MCPM is not set
-# CONFIG_MCTP is not set
-# CONFIG_MD is not set
-# CONFIG_MDIO_BCM_UNIMAC is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
-# CONFIG_MDIO_DEVICE is not set
-# CONFIG_MDIO_DEVRES is not set
-# CONFIG_MDIO_HISI_FEMAC is not set
-# CONFIG_MDIO_IPQ4019 is not set
-# CONFIG_MDIO_IPQ8064 is not set
-# CONFIG_MDIO_MSCC_MIIM is not set
-# CONFIG_MDIO_MVUSB is not set
-# CONFIG_MDIO_OCTEON is not set
-# CONFIG_MDIO_THUNDER is not set
-# CONFIG_MDIO_XPCS is not set
-# CONFIG_MDM_GCC_9607 is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_MEDIATEK_GE_PHY is not set
-# CONFIG_MEDIATEK_MT6577_AUXADC is not set
-# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_CAMERA_SUPPORT is not set
-# CONFIG_MEDIA_CEC_SUPPORT is not set
-# CONFIG_MEDIA_CONTROLLER is not set
-# CONFIG_MEDIA_CONTROLLER_DVB is not set
-# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
-# CONFIG_MEDIA_PCI_SUPPORT is not set
-# CONFIG_MEDIA_PLATFORM_DRIVERS is not set
-# CONFIG_MEDIA_PLATFORM_SUPPORT is not set
-# CONFIG_MEDIA_RADIO_SUPPORT is not set
-# CONFIG_MEDIA_RC_SUPPORT is not set
-# CONFIG_MEDIA_SDR_SUPPORT is not set
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_MEDIA_SUPPORT_FILTER is not set
-# CONFIG_MEDIA_TEST_SUPPORT is not set
-# CONFIG_MEDIA_TUNER_E4000 is not set
-# CONFIG_MEDIA_TUNER_FC0011 is not set
-# CONFIG_MEDIA_TUNER_FC0012 is not set
-# CONFIG_MEDIA_TUNER_FC0013 is not set
-# CONFIG_MEDIA_TUNER_FC2580 is not set
-# CONFIG_MEDIA_TUNER_IT913X is not set
-# CONFIG_MEDIA_TUNER_M88RS6000T is not set
-# CONFIG_MEDIA_TUNER_MAX2165 is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_MEDIA_TUNER_MSI001 is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2063 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MXL301RF is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_QM1D1B0004 is not set
-# CONFIG_MEDIA_TUNER_QM1D1C0042 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_R820T is not set
-# CONFIG_MEDIA_TUNER_SI2157 is not set
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA18212 is not set
-# CONFIG_MEDIA_TUNER_TDA18218 is not set
-# CONFIG_MEDIA_TUNER_TDA18250 is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_TUA9001 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC4000 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_USB_SUPPORT is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_MELLANOX_PLATFORM is not set
-CONFIG_MEMBARRIER=y
-# CONFIG_MEMORY is not set
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_MEMORY_HOTPLUG is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MEN_A21_WDT is not set
-# CONFIG_MESON_SM is not set
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_AC100 is not set
-# CONFIG_MFD_ACT8945A is not set
-# CONFIG_MFD_ARIZONA_I2C is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_MFD_AS3722 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_ATC260X_I2C is not set
-# CONFIG_MFD_ATMEL_FLEXCOM is not set
-# CONFIG_MFD_ATMEL_HLCDC is not set
-# CONFIG_MFD_AXP20X is not set
-# CONFIG_MFD_AXP20X_I2C is not set
-# CONFIG_MFD_BCM590XX is not set
-# CONFIG_MFD_BD9571MWV is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_CPCAP is not set
-# CONFIG_MFD_CROS_EC is not set
-# CONFIG_MFD_CS5535 is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_DA9062 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_DA9150 is not set
-# CONFIG_MFD_DLN2 is not set
-# CONFIG_MFD_EXYNOS_LPASS is not set
-# CONFIG_MFD_GATEWORKS_GSC is not set
-# CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_INTEL_M10_BMC is not set
-# CONFIG_MFD_INTEL_PMT is not set
-# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
-# CONFIG_MFD_IQS62X is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_KEMPLD is not set
-# CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_LOCHNAGAR is not set
-# CONFIG_MFD_LP3943 is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MADERA is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_MAX77620 is not set
-# CONFIG_MFD_MAX77650 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX77714 is not set
-# CONFIG_MFD_MAX77843 is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC13XXX_I2C is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-# CONFIG_MFD_MENF21BMC is not set
-# CONFIG_MFD_MP2629 is not set
-# CONFIG_MFD_MT6360 is not set
-# CONFIG_MFD_MT6370 is not set
-# CONFIG_MFD_MT6397 is not set
-# CONFIG_MFD_NTXEC is not set
-# CONFIG_MFD_OCELOT is not set
-# CONFIG_MFD_OMAP_USB_HOST is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_PM8921_CORE is not set
-# CONFIG_MFD_PM8XXX is not set
-# CONFIG_MFD_QCOM_PM8008 is not set
-# CONFIG_MFD_RASPBERRYPI_POE_HAT is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_RETU is not set
-# CONFIG_MFD_RK808 is not set
-# CONFIG_MFD_RN5T618 is not set
-# CONFIG_MFD_ROHM_BD70528 is not set
-# CONFIG_MFD_ROHM_BD71828 is not set
-# CONFIG_MFD_ROHM_BD718XX is not set
-# CONFIG_MFD_ROHM_BD957XMUF is not set
-# CONFIG_MFD_RP1 is not set
-# CONFIG_MFD_RPISENSE_CORE is not set
-# CONFIG_MFD_RSMU_I2C is not set
-# CONFIG_MFD_RSMU_SPI is not set
-# CONFIG_MFD_RT4831 is not set
-# CONFIG_MFD_RT5033 is not set
-# CONFIG_MFD_RT5120 is not set
-# CONFIG_MFD_RTSX_PCI is not set
-# CONFIG_MFD_RTSX_USB is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_SI476X_CORE is not set
-# CONFIG_MFD_SKY81452 is not set
-# CONFIG_MFD_SL28CPLD is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_STMFX is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_STPMIC1 is not set
-# CONFIG_MFD_SY7636A is not set
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_MFD_TI_AM335X_TSCADC is not set
-# CONFIG_MFD_TI_LMU is not set
-# CONFIG_MFD_TI_LP873X is not set
-# CONFIG_MFD_TI_LP87565 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TPS65086 is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS65218 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_MFD_TPS68470 is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_MFD_TQMX86 is not set
-# CONFIG_MFD_VIPERBOARD is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MHI_BUS is not set
-# CONFIG_MHI_BUS_DEBUG is not set
-# CONFIG_MHI_BUS_EP is not set
-# CONFIG_MHI_BUS_PCI_GENERIC is not set
-# CONFIG_MHI_NET is not set
-# CONFIG_MHI_WWAN_CTRL is not set
-# CONFIG_MHI_WWAN_MBIM is not set
-# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MICROCHIP_KSZ is not set
-# CONFIG_MICROCHIP_PHY is not set
-# CONFIG_MICROCHIP_PIT64B is not set
-# CONFIG_MICROCHIP_T1_PHY is not set
-# CONFIG_MICROSEMI_PHY is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-# CONFIG_MIKROTIK is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_MIPS32_O32 is not set
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_CDMM is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_DTB is not set
-# CONFIG_MIPS_CMP is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_CPS is not set
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-# CONFIG_MIPS_FPU_EMULATOR is not set
-# CONFIG_MIPS_FP_SUPPORT is not set
-# CONFIG_MIPS_GENERIC is not set
-# CONFIG_MIPS_GENERIC_KERNEL is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_O32_FP64_SUPPORT is not set
-# CONFIG_MIPS_PARAVIRT is not set
-# CONFIG_MIPS_PLATFORM_DEVICES is not set
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
-# CONFIG_MIPS_SEAD3 is not set
-# CONFIG_MIPS_VA_BITS_48 is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MISC_ALCOR_PCI is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_MISC_RTSX_PCI is not set
-# CONFIG_MISC_RTSX_USB is not set
-# CONFIG_MISDN is not set
-# CONFIG_MISDN_AVMFRITZ is not set
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN_INFINEON is not set
-# CONFIG_MISDN_NETJET is not set
-# CONFIG_MISDN_SPEEDFAX is not set
-# CONFIG_MISDN_W6692 is not set
-CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY=y
-# CONFIG_MKISS is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX5_CORE is not set
-# CONFIG_MLX5_EN_MACSEC is not set
-# CONFIG_MLX5_SF is not set
-# CONFIG_MLX5_VFIO_PCI is not set
-# CONFIG_MLX90614 is not set
-# CONFIG_MLX90632 is not set
-# CONFIG_MLXFW is not set
-# CONFIG_MLXSW_CORE is not set
-# CONFIG_MLX_CPLD_PLATFORM is not set
-# CONFIG_MLX_PLATFORM is not set
-# CONFIG_MMA7455_I2C is not set
-# CONFIG_MMA7455_SPI is not set
-# CONFIG_MMA7660 is not set
-# CONFIG_MMA8452 is not set
-# CONFIG_MMA9551 is not set
-# CONFIG_MMA9553 is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC35240 is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC_AU1X is not set
-# CONFIG_MMC_BLOCK is not set
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_MMC_BLOCK_MINORS=8
-# CONFIG_MMC_CAVIUM_THUNDERX is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_CQHCI is not set
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_HSQ is not set
-# CONFIG_MMC_JZ4740 is not set
-# CONFIG_MMC_MTK is not set
-# CONFIG_MMC_MVSDIO is not set
-# CONFIG_MMC_S3C is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_ACPI is not set
-# CONFIG_MMC_SDHCI_AM654 is not set
-# CONFIG_MMC_SDHCI_BCM_KONA is not set
-# CONFIG_MMC_SDHCI_BRCMSTB is not set
-# CONFIG_MMC_SDHCI_CADENCE is not set
-# CONFIG_MMC_SDHCI_F_SDH30 is not set
-# CONFIG_MMC_SDHCI_IPROC is not set
-# CONFIG_MMC_SDHCI_MILBEAUT is not set
-# CONFIG_MMC_SDHCI_MSM is not set
-# CONFIG_MMC_SDHCI_OF_ARASAN is not set
-# CONFIG_MMC_SDHCI_OF_ASPEED is not set
-# CONFIG_MMC_SDHCI_OF_AT91 is not set
-# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
-# CONFIG_MMC_SDHCI_OF_ESDHC is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-# CONFIG_MMC_SDHCI_OMAP is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDHCI_S3C is not set
-# CONFIG_MMC_SDHCI_XENON is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_STM32_SDMMC is not set
-# CONFIG_MMC_TEST is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_TOSHIBA_PCI is not set
-# CONFIG_MMC_USDHI6ROL0 is not set
-# CONFIG_MMC_USHC is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_MMU=y
-CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
-CONFIG_MMU_GATHER_TABLE_FREE=y
-CONFIG_MODPROBE_PATH="/sbin/modprobe"
-CONFIG_MODULES=y
-# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
-# CONFIG_MODULE_COMPRESS is not set
-# CONFIG_MODULE_COMPRESS_GZIP is not set
-CONFIG_MODULE_COMPRESS_NONE=y
-# CONFIG_MODULE_COMPRESS_XZ is not set
-# CONFIG_MODULE_COMPRESS_ZSTD is not set
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SIG is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULE_STRIPPED=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOST is not set
-# CONFIG_MOTORCOMM_PHY is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_ELAN_I2C is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_PS2_FOCALTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_MOXTET is not set
-# CONFIG_MPL115 is not set
-# CONFIG_MPL115_I2C is not set
-# CONFIG_MPL115_SPI is not set
-# CONFIG_MPL3115 is not set
-# CONFIG_MPLS is not set
-# CONFIG_MPLS_IPTUNNEL is not set
-# CONFIG_MPLS_ROUTING is not set
-# CONFIG_MPTCP is not set
-# CONFIG_MPU3050_I2C is not set
-# CONFIG_MQ_IOSCHED_DEADLINE is not set
-# CONFIG_MQ_IOSCHED_KYBER is not set
-# CONFIG_MS5611 is not set
-# CONFIG_MS5637 is not set
-# CONFIG_MSA311 is not set
-# CONFIG_MSCC_OCELOT_SWITCH is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_MSE102X is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_MSM_GCC_8953 is not set
-# CONFIG_MSM_MMCC_8994 is not set
-# CONFIG_MST_IRQ is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_HYPERBUS is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LATCH_ADDR is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_LPDDR2_NVM is not set
-# CONFIG_MTD_M25P80 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MCHP23K256 is not set
-# CONFIG_MTD_MCHP48L640 is not set
-# CONFIG_MTD_MT81xx_NOR is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_AMS_DELTA is not set
-# CONFIG_MTD_NAND_AR934X is not set
-# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
-# CONFIG_MTD_NAND_ARASAN is not set
-# CONFIG_MTD_NAND_ATMEL is not set
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_BCH is not set
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_BRCMNAND is not set
-# CONFIG_MTD_NAND_BRCMNAND_BCM63XX is not set
-# CONFIG_MTD_NAND_BRCMNAND_BCMBCA is not set
-# CONFIG_MTD_NAND_BRCMNAND_BRCMSTB is not set
-# CONFIG_MTD_NAND_BRCMNAND_IPROC is not set
-# CONFIG_MTD_NAND_CADENCE is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_CM_X270 is not set
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_DAVINCI is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_DENALI_DT is not set
-# CONFIG_MTD_NAND_DENALI_PCI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_ECC is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_NAND_ECC_MXIC is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_ECC_SW_BCH is not set
-# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
-# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_IFC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_NAND_FSMC is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_GPMI_NAND is not set
-# CONFIG_MTD_NAND_HISI504 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_INTEL_LGM is not set
-# CONFIG_MTD_NAND_JZ4740 is not set
-# CONFIG_MTD_NAND_MPC5121_NFC is not set
-# CONFIG_MTD_NAND_MTK is not set
-# CONFIG_MTD_NAND_MTK_BMT is not set
-# CONFIG_MTD_NAND_MXC is not set
-# CONFIG_MTD_NAND_MXIC is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_NDFC is not set
-# CONFIG_MTD_NAND_NUC900 is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
-# CONFIG_MTD_NAND_ORION is not set
-# CONFIG_MTD_NAND_PASEMI is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_RB4XX is not set
-# CONFIG_MTD_NAND_RB750 is not set
-# CONFIG_MTD_NAND_RB91X is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_S3C2410 is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_NAND_SOCRATES is not set
-# CONFIG_MTD_NAND_TMIO is not set
-# CONFIG_MTD_NAND_TXX9NDFMC is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_PARSER_TRX is not set
-# CONFIG_MTD_PARTITIONED_MASTER is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PHYSMAP_GEMINI is not set
-# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
-# CONFIG_MTD_PHYSMAP_IXP4XX is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
-# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
-# CONFIG_MTD_PHYSMAP_VERSATILE is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_RAW_NAND is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-# CONFIG_MTD_ROUTERBOOT_PARTS is not set
-# CONFIG_MTD_SERCOMM_PARTS is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_SPINAND_MT29F is not set
-# CONFIG_MTD_SPI_NAND is not set
-# CONFIG_MTD_SPI_NOR is not set
-# CONFIG_MTD_SPI_NOR_SWP_DISABLE is not set
-CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
-# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-# CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE is not set
-CONFIG_MTD_SPLIT=y
-# CONFIG_MTD_SPLIT_BCM63XX_FW is not set
-# CONFIG_MTD_SPLIT_BCM_WFI_FW is not set
-# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_ELF_FW is not set
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_FIRMWARE is not set
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
-# CONFIG_MTD_SPLIT_FIT_FW is not set
-# CONFIG_MTD_SPLIT_H3C_VFS is not set
-# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_LZMA_FW is not set
-# CONFIG_MTD_SPLIT_MINOR_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-# CONFIG_MTD_SPLIT_SEIL_FW is not set
-CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
-CONFIG_MTD_SPLIT_SUPPORT=y
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_SPLIT_TRX_FW is not set
-# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_WRGG_FW is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SWAP is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-# CONFIG_MTD_UBI_NVMEM is not set
-# CONFIG_MTD_UIMAGE_SPLIT is not set
-# CONFIG_MTD_VIRT_CONCAT is not set
-# CONFIG_MTK_DEVAPC is not set
-# CONFIG_MTK_MMC is not set
-# CONFIG_MTK_MMSYS is not set
-# CONFIG_MTK_T7XX is not set
-# CONFIG_MTK_THERMAL is not set
-# CONFIG_MULTIPLEXER is not set
-CONFIG_MULTIUSER=y
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_MUX_ADG792A is not set
-# CONFIG_MUX_ADGS1408 is not set
-# CONFIG_MUX_GPIO is not set
-# CONFIG_MUX_MMIO is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_MVMDIO is not set
-# CONFIG_MVNETA_BM is not set
-# CONFIG_MVSW61XX_PHY is not set
-# CONFIG_MV_XOR_V2 is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWL8K is not set
-# CONFIG_MXC4005 is not set
-# CONFIG_MXC6255 is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NAU7802 is not set
-# CONFIG_NBPFAXI_DMA is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2000 is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NEC_MARKEINS is not set
-CONFIG_NET=y
-# CONFIG_NETCONSOLE is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVSIM is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_EGRESS is not set
-# CONFIG_NETFILTER_INGRESS is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
-# CONFIG_NETFILTER_NETLINK_HOOK is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_OSF is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XTABLES_COMPAT is not set
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_BPF is not set
-# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
-# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFS_STATS is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETLINK_DIAG is not set
-# CONFIG_NETLINK_MMAP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETROM is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_BPF is not set
-# CONFIG_NET_ACT_CSUM is not set
-# CONFIG_NET_ACT_CT is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_GATE is not set
-# CONFIG_NET_ACT_IFE is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_MPLS is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_SAMPLE is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_ACT_SKBMOD is not set
-# CONFIG_NET_ACT_TUNNEL_KEY is not set
-# CONFIG_NET_ACT_VLAN is not set
-CONFIG_NET_CADENCE=y
-# CONFIG_NET_CALXEDA_XGMAC is not set
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_BPF is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FLOWER is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_NET_CLS_MATCHALL is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_U32 is not set
-CONFIG_NET_CORE=y
-# CONFIG_NET_DEVLINK is not set
-# CONFIG_NET_DEV_REFCNT_TRACKER is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_DSA_AR9331 is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
-# CONFIG_NET_DSA_LANTIQ_GSWIP is not set
-# CONFIG_NET_DSA_LEGACY is not set
-# CONFIG_NET_DSA_LOOP is not set
-# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set
-# CONFIG_NET_DSA_MICROCHIP_KSZ9477 is not set
-# CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON is not set
-# CONFIG_NET_DSA_MSCC_FELIX is not set
-# CONFIG_NET_DSA_MSCC_SEVILLE is not set
-# CONFIG_NET_DSA_MT7530 is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6352 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
-# CONFIG_NET_DSA_QCA8K is not set
-# CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT is not set
-# CONFIG_NET_DSA_REALTEK is not set
-# CONFIG_NET_DSA_REALTEK_SMI is not set
-# CONFIG_NET_DSA_SJA1105 is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
-# CONFIG_NET_DSA_TAG_8021Q is not set
-# CONFIG_NET_DSA_TAG_AR9331 is not set
-# CONFIG_NET_DSA_TAG_BRCM is not set
-# CONFIG_NET_DSA_TAG_BRCM_LEGACY is not set
-# CONFIG_NET_DSA_TAG_BRCM_PREPEND is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_DSA_TAG_GSWIP is not set
-# CONFIG_NET_DSA_TAG_HELLCREEK is not set
-# CONFIG_NET_DSA_TAG_KSZ is not set
-# CONFIG_NET_DSA_TAG_LAN9303 is not set
-# CONFIG_NET_DSA_TAG_MTK is not set
-# CONFIG_NET_DSA_TAG_OCELOT is not set
-# CONFIG_NET_DSA_TAG_OCELOT_8021Q is not set
-# CONFIG_NET_DSA_TAG_QCA is not set
-# CONFIG_NET_DSA_TAG_RTL4_A is not set
-# CONFIG_NET_DSA_TAG_RTL8_4 is not set
-# CONFIG_NET_DSA_TAG_RZN1_A5PSW is not set
-# CONFIG_NET_DSA_TAG_SJA1105 is not set
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-# CONFIG_NET_DSA_TAG_XRS700X is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX_SPI is not set
-# CONFIG_NET_DSA_XRS700X_I2C is not set
-# CONFIG_NET_DSA_XRS700X_MDIO is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_CANID is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_IPT is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_FAILOVER is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NET_FOU is not set
-# CONFIG_NET_FOU_IP_TUNNELS is not set
-# CONFIG_NET_IFE is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPVTI is not set
-# CONFIG_NET_IP_TUNNEL is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-# CONFIG_NET_L3_MASTER_DEV is not set
-# CONFIG_NET_MEDIATEK_STAR_EMAC is not set
-# CONFIG_NET_MPLS_GSO is not set
-# CONFIG_NET_NCSI is not set
-# CONFIG_NET_NSH is not set
-# CONFIG_NET_NS_REFCNT_TRACKER is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_NET_PTP_CLASSIFY is not set
-CONFIG_NET_RX_BUSY_POLL=y
-# CONFIG_NET_SB1000 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_CAKE is not set
-# CONFIG_NET_SCH_CBS is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_CODEL is not set
-CONFIG_NET_SCH_DEFAULT=y
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_ETF is not set
-# CONFIG_NET_SCH_ETS is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_FQ is not set
-CONFIG_NET_SCH_FQ_CODEL=y
-# CONFIG_NET_SCH_FQ_PIE is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HHF is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PIE is not set
-# CONFIG_NET_SCH_PLUG is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_SKBPRIO is not set
-# CONFIG_NET_SCH_TAPRIO is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCTPPROBE is not set
-# CONFIG_NET_SELFTESTS is not set
-CONFIG_NET_SOCK_MSG=y
-# CONFIG_NET_SWITCHDEV is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_TC_SKB_EXT is not set
-# CONFIG_NET_TEAM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_UDP_TUNNEL is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_NET_VENDOR_ADAPTEC=y
-CONFIG_NET_VENDOR_ADI=y
-CONFIG_NET_VENDOR_AGERE=y
-CONFIG_NET_VENDOR_ALACRITECH=y
-CONFIG_NET_VENDOR_ALTEON=y
-CONFIG_NET_VENDOR_AMAZON=y
-CONFIG_NET_VENDOR_AMD=y
-CONFIG_NET_VENDOR_AQUANTIA=y
-CONFIG_NET_VENDOR_ARC=y
-# CONFIG_NET_VENDOR_ASIX is not set
-CONFIG_NET_VENDOR_ATHEROS=y
-CONFIG_NET_VENDOR_AURORA=y
-CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_NET_VENDOR_BROCADE=y
-CONFIG_NET_VENDOR_CADENCE=y
-CONFIG_NET_VENDOR_CAVIUM=y
-CONFIG_NET_VENDOR_CHELSIO=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_NET_VENDOR_CISCO=y
-CONFIG_NET_VENDOR_CORTINA=y
-CONFIG_NET_VENDOR_DAVICOM=y
-CONFIG_NET_VENDOR_DEC=y
-CONFIG_NET_VENDOR_DLINK=y
-CONFIG_NET_VENDOR_EMULEX=y
-# CONFIG_NET_VENDOR_ENGLEDER is not set
-CONFIG_NET_VENDOR_EXAR=y
-CONFIG_NET_VENDOR_EZCHIP=y
-CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_NET_VENDOR_FUJITSU=y
-# CONFIG_NET_VENDOR_FUNGIBLE is not set
-CONFIG_NET_VENDOR_GOOGLE=y
-CONFIG_NET_VENDOR_HISILICON=y
-CONFIG_NET_VENDOR_HP=y
-CONFIG_NET_VENDOR_HUAWEI=y
-CONFIG_NET_VENDOR_I825XX=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_NET_VENDOR_INTEL=y
-# CONFIG_NET_VENDOR_LITEX is not set
-CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_NET_VENDOR_MELLANOX=y
-CONFIG_NET_VENDOR_MICREL=y
-CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_NET_VENDOR_MICROSEMI=y
-# CONFIG_NET_VENDOR_MICROSOFT is not set
-CONFIG_NET_VENDOR_MYRI=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_NETERION=y
-CONFIG_NET_VENDOR_NETRONOME=y
-CONFIG_NET_VENDOR_NI=y
-CONFIG_NET_VENDOR_NVIDIA=y
-CONFIG_NET_VENDOR_OKI=y
-CONFIG_NET_VENDOR_PACKET_ENGINES=y
-CONFIG_NET_VENDOR_PENSANDO=y
-CONFIG_NET_VENDOR_QLOGIC=y
-CONFIG_NET_VENDOR_QUALCOMM=y
-CONFIG_NET_VENDOR_RDC=y
-CONFIG_NET_VENDOR_REALTEK=y
-CONFIG_NET_VENDOR_RENESAS=y
-CONFIG_NET_VENDOR_ROCKER=y
-CONFIG_NET_VENDOR_SAMSUNG=y
-CONFIG_NET_VENDOR_SEEQ=y
-CONFIG_NET_VENDOR_SILAN=y
-CONFIG_NET_VENDOR_SIS=y
-CONFIG_NET_VENDOR_SMSC=y
-CONFIG_NET_VENDOR_SOCIONEXT=y
-CONFIG_NET_VENDOR_SOLARFLARE=y
-CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_NET_VENDOR_SUN=y
-CONFIG_NET_VENDOR_SYNOPSYS=y
-CONFIG_NET_VENDOR_TEHUTI=y
-CONFIG_NET_VENDOR_TI=y
-CONFIG_NET_VENDOR_TOSHIBA=y
-# CONFIG_NET_VENDOR_VERTEXCOM is not set
-CONFIG_NET_VENDOR_VIA=y
-# CONFIG_NET_VENDOR_WANGXUN is not set
-CONFIG_NET_VENDOR_WIZNET=y
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_NET_VENDOR_XIRCOM=y
-# CONFIG_NET_VRF is not set
-# CONFIG_NET_XGENE is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NFC is not set
-# CONFIG_NFP is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V2 is not set
-# CONFIG_NFSD_V2_ACL is not set
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_FSCACHE is not set
-# CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V2 is not set
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFTL is not set
-# CONFIG_NFT_BRIDGE_META is not set
-# CONFIG_NFT_BRIDGE_REJECT is not set
-# CONFIG_NFT_CONNLIMIT is not set
-# CONFIG_NFT_DUP_IPV4 is not set
-# CONFIG_NFT_DUP_IPV6 is not set
-# CONFIG_NFT_FIB_IPV4 is not set
-# CONFIG_NFT_FIB_IPV6 is not set
-# CONFIG_NFT_FIB_NETDEV is not set
-# CONFIG_NFT_FLOW_OFFLOAD is not set
-# CONFIG_NFT_OBJREF is not set
-# CONFIG_NFT_OSF is not set
-# CONFIG_NFT_REJECT_NETDEV is not set
-# CONFIG_NFT_RT is not set
-# CONFIG_NFT_SET_BITMAP is not set
-# CONFIG_NFT_SOCKET is not set
-# CONFIG_NFT_SYNPROXY is not set
-# CONFIG_NFT_TPROXY is not set
-# CONFIG_NFT_TUNNEL is not set
-# CONFIG_NFT_XFRM is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_BRIDGE is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_LABELS is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-CONFIG_NF_CONNTRACK_PROCFS=y
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SECMARK is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CONNTRACK_ZONES is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_HELPER is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_DUP_IPV4 is not set
-# CONFIG_NF_DUP_IPV6 is not set
-# CONFIG_NF_FLOW_TABLE is not set
-# CONFIG_NF_FLOW_TABLE_PROCFS is not set
-# CONFIG_NF_LOG_ARP is not set
-# CONFIG_NF_LOG_BRIDGE is not set
-# CONFIG_NF_LOG_IPV4 is not set
-# CONFIG_NF_LOG_NETDEV is not set
-# CONFIG_NF_LOG_SYSLOG is not set
-# CONFIG_NF_NAT is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT_NEEDED is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_REJECT_IPV4 is not set
-# CONFIG_NF_REJECT_IPV6 is not set
-# CONFIG_NF_SOCKET_IPV4 is not set
-# CONFIG_NF_SOCKET_IPV6 is not set
-# CONFIG_NF_TABLES is not set
-CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_TABLES_BRIDGE=y
-CONFIG_NF_TABLES_INET=y
-CONFIG_NF_TABLES_IPV4=y
-CONFIG_NF_TABLES_IPV6=y
-CONFIG_NF_TABLES_NETDEV=y
-# CONFIG_NF_TABLES_SET is not set
-# CONFIG_NF_TPROXY_IPV4 is not set
-# CONFIG_NF_TPROXY_IPV6 is not set
-# CONFIG_NGBE is not set
-# CONFIG_NI65 is not set
-# CONFIG_NI903X_WDT is not set
-# CONFIG_NIC7018_WDT is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_NIU is not set
-# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
-CONFIG_NLATTR=y
-# CONFIG_NLMON is not set
-# CONFIG_NLM_XLP_BOARD is not set
-# CONFIG_NLM_XLR_BOARD is not set
-# CONFIG_NLS is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_MAC_CELTIC is not set
-# CONFIG_NLS_MAC_CENTEURO is not set
-# CONFIG_NLS_MAC_CROATIAN is not set
-# CONFIG_NLS_MAC_CYRILLIC is not set
-# CONFIG_NLS_MAC_GAELIC is not set
-# CONFIG_NLS_MAC_GREEK is not set
-# CONFIG_NLS_MAC_ICELAND is not set
-# CONFIG_NLS_MAC_INUIT is not set
-# CONFIG_NLS_MAC_ROMAN is not set
-# CONFIG_NLS_MAC_ROMANIAN is not set
-# CONFIG_NLS_MAC_TURKISH is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_NMI_LOG_BUF_SHIFT=13
-# CONFIG_NOA1305 is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NO_BOOTMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NO_HZ_FULL is not set
-# CONFIG_NO_HZ_IDLE is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTB is not set
-# CONFIG_NTFS3_64BIT_CLUSTER is not set
-# CONFIG_NTFS3_FS is not set
-# CONFIG_NTFS3_FS_POSIX_ACL is not set
-# CONFIG_NTFS3_LZX_XPRESS is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_NTP_PPS is not set
-# CONFIG_NULL_TTY is not set
-# CONFIG_NUMA is not set
-# CONFIG_NVIDIA_CARMEL_CNP_ERRATUM is not set
-# CONFIG_NVM is not set
-# CONFIG_NVMEM is not set
-# CONFIG_NVMEM_BCM_OCOTP is not set
-# CONFIG_NVMEM_IMX_OCOTP is not set
-# CONFIG_NVMEM_LAYOUT_ONIE_TLV is not set
-# CONFIG_NVMEM_LAYOUT_SL28_VPD is not set
-# CONFIG_NVMEM_LAYOUT_U_BOOT_ENV is not set
-# CONFIG_NVMEM_REBOOT_MODE is not set
-# CONFIG_NVMEM_RMEM is not set
-# CONFIG_NVMEM_SYSFS is not set
-# CONFIG_NVMEM_U_BOOT_ENV is not set
-# CONFIG_NVME_AUTH is not set
-# CONFIG_NVME_FC is not set
-# CONFIG_NVME_TARGET is not set
-# CONFIG_NVME_TCP is not set
-# CONFIG_NVME_VERBOSE_ERRORS is not set
-# CONFIG_NVRAM is not set
-# CONFIG_NV_TCO is not set
-# CONFIG_NXP_C45_TJA11XX_PHY is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_NXP_TJA11XX_PHY is not set
-# CONFIG_N_GSM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_OBS600 is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OCTEONTX2_AF is not set
-# CONFIG_OCTEONTX2_PF is not set
-# CONFIG_OCTEON_EP is not set
-# CONFIG_OF_OVERLAY is not set
-CONFIG_OF_RESERVED_MEM=y
-# CONFIG_OF_UNITTEST is not set
-# CONFIG_OID_REGISTRY is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP_OCP2SCP is not set
-# CONFIG_OMAP_USB2 is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_OPENVSWITCH is not set
-# CONFIG_OPEN_DICE is not set
-# CONFIG_OPROFILE is not set
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-# CONFIG_OPT3001 is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_ORANGEFS_FS is not set
-# CONFIG_ORION_WATCHDOG is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_OSNOISE_TRACER is not set
-CONFIG_OVERLAY_FS=y
-# CONFIG_OVERLAY_FS_INDEX is not set
-# CONFIG_OVERLAY_FS_METACOPY is not set
-CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
-# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
-CONFIG_OVERLAY_FS_XINO_AUTO=y
-# CONFIG_OWL_LOADER is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_PA12203001 is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_DIAG is not set
-# CONFIG_PACKING is not set
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_PAGE_OWNER is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_PAGE_POOL is not set
-# CONFIG_PAGE_POOL_STATS is not set
-# CONFIG_PAGE_REPORTING is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_TABLE_CHECK is not set
-# CONFIG_PALMAS_GPADC is not set
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_PANEL is not set
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PANIC_ON_OOPS_VALUE=1
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARAVIRT is not set
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARASAN_CF is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IMX is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OCTEON_CF is not set
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC104 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCH_DMA is not set
-# CONFIG_PCH_GBE is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCIEAER is not set
-# CONFIG_PCIEAER_INJECT is not set
-# CONFIG_PCIEASPM is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIE_AL is not set
-# CONFIG_PCIE_ALTERA is not set
-# CONFIG_PCIE_ARMADA_8K is not set
-CONFIG_PCIE_BUS_DEFAULT=y
-# CONFIG_PCIE_BUS_PEER2PEER is not set
-# CONFIG_PCIE_BUS_PERFORMANCE is not set
-# CONFIG_PCIE_BUS_SAFE is not set
-# CONFIG_PCIE_BUS_TUNE_OFF is not set
-# CONFIG_PCIE_BW is not set
-# CONFIG_PCIE_CADENCE_HOST is not set
-# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
-# CONFIG_PCIE_DPC is not set
-# CONFIG_PCIE_DW_PLAT is not set
-# CONFIG_PCIE_DW_PLAT_HOST is not set
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIE_IPROC is not set
-# CONFIG_PCIE_KIRIN is not set
-# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
-# CONFIG_PCIE_MEDIATEK_GEN3 is not set
-# CONFIG_PCIE_MICROCHIP_HOST is not set
-# CONFIG_PCIE_PTM is not set
-# CONFIG_PCIE_XILINX is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
-# CONFIG_PCI_ENDPOINT is not set
-# CONFIG_PCI_ENDPOINT_TEST is not set
-# CONFIG_PCI_FTPCI100 is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_HISI is not set
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCI_HOST_THUNDER_ECAM is not set
-# CONFIG_PCI_HOST_THUNDER_PEM is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_J721E_HOST is not set
-# CONFIG_PCI_LAYERSCAPE is not set
-# CONFIG_PCI_MESON is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCI_PF_STUB is not set
-# CONFIG_PCI_PRI is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_SW_SWITCHTEC is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCI_V3_SEMI is not set
-# CONFIG_PCI_XGENE is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCNET32 is not set
-CONFIG_PCP_BATCH_SCALE_MAX=5
-# CONFIG_PCPU_DEV_REFCNT is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PCS_MTK_USXGMII is not set
-# CONFIG_PCS_XPCS is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PECI is not set
-# CONFIG_PERCPU_STATS is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_EVENTS_AMD_POWER is not set
-# CONFIG_PERSISTENT_KEYRINGS is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYLIB_LEDS is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PHY_BRCM_USB is not set
-# CONFIG_PHY_CADENCE_DP is not set
-# CONFIG_PHY_CADENCE_DPHY is not set
-# CONFIG_PHY_CADENCE_DPHY_RX is not set
-# CONFIG_PHY_CADENCE_SALVO is not set
-# CONFIG_PHY_CADENCE_SIERRA is not set
-# CONFIG_PHY_CADENCE_TORRENT is not set
-# CONFIG_PHY_CAN_TRANSCEIVER is not set
-# CONFIG_PHY_CPCAP_USB is not set
-# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
-# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
-# CONFIG_PHY_FSL_IMX8MQ_USB is not set
-# CONFIG_PHY_INGENIC_USB is not set
-# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
-# CONFIG_PHY_LAN966X_SERDES is not set
-# CONFIG_PHY_MAPPHONE_MDM6600 is not set
-# CONFIG_PHY_MIXEL_MIPI_DPHY is not set
-# CONFIG_PHY_MTK_HDMI is not set
-# CONFIG_PHY_MTK_MIPI_DSI is not set
-# CONFIG_PHY_MTK_XFI_TPHY is not set
-# CONFIG_PHY_MVEBU_CP110_UTMI is not set
-# CONFIG_PHY_OCELOT_SERDES is not set
-# CONFIG_PHY_PISTACHIO_USB is not set
-# CONFIG_PHY_PXA_28NM_HSIC is not set
-# CONFIG_PHY_PXA_28NM_USB2 is not set
-# CONFIG_PHY_QCOM_DWC3 is not set
-# CONFIG_PHY_QCOM_USB_HS is not set
-# CONFIG_PHY_QCOM_USB_HSIC is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
-# CONFIG_PHY_TUSB1210 is not set
-# CONFIG_PHY_XGENE is not set
-# CONFIG_PI433 is not set
-# CONFIG_PID_IN_CONTEXTIDR is not set
-# CONFIG_PID_NS is not set
-CONFIG_PINCONF=y
-# CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_AXP209 is not set
-# CONFIG_PINCTRL_BCM2712 is not set
-# CONFIG_PINCTRL_CEDARFORK is not set
-# CONFIG_PINCTRL_CY8C95X0 is not set
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
-# CONFIG_PINCTRL_ICELAKE is not set
-# CONFIG_PINCTRL_INGENIC is not set
-# CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_MCP23S08 is not set
-# CONFIG_PINCTRL_MDM9607 is not set
-# CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
-# CONFIG_PINCTRL_MSM8953 is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-# CONFIG_PINCTRL_MT6779 is not set
-# CONFIG_PINCTRL_MT8167 is not set
-# CONFIG_PINCTRL_MT8192 is not set
-# CONFIG_PINCTRL_MT8195 is not set
-# CONFIG_PINCTRL_MT8365 is not set
-# CONFIG_PINCTRL_MTK_V2 is not set
-# CONFIG_PINCTRL_OCELOT is not set
-# CONFIG_PINCTRL_PISTACHIO is not set
-# CONFIG_PINCTRL_RP1 is not set
-# CONFIG_PINCTRL_SC7280 is not set
-# CONFIG_PINCTRL_SC8180X is not set
-# CONFIG_PINCTRL_SDX55 is not set
-CONFIG_PINCTRL_SINGLE=y
-# CONFIG_PINCTRL_SM6115 is not set
-# CONFIG_PINCTRL_SM6125 is not set
-# CONFIG_PINCTRL_SM8350 is not set
-# CONFIG_PINCTRL_STMFX is not set
-# CONFIG_PINCTRL_SX150X is not set
-# CONFIG_PING is not set
-CONFIG_PINMUX=y
-# CONFIG_PKCS7_MESSAGE_PARSER is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-# CONFIG_PL320_MBOX is not set
-# CONFIG_PL330_DMA is not set
-# CONFIG_PLATFORM_MHU is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_PLIP is not set
-# CONFIG_PLX_DMA is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PM is not set
-# CONFIG_PMBUS is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMS7003 is not set
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_DEVFREQ is not set
-# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
-# CONFIG_PM_WAKELOCKS is not set
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_POSIX_TIMERS=y
-# CONFIG_POWERCAP is not set
-# CONFIG_POWER_AVS is not set
-# CONFIG_POWER_RESET is not set
-# CONFIG_POWER_RESET_BRCMKONA is not set
-# CONFIG_POWER_RESET_BRCMSTB is not set
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LINKSTATION is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
-# CONFIG_POWER_RESET_QNAP is not set
-# CONFIG_POWER_RESET_REGULATOR is not set
-# CONFIG_POWER_RESET_RESTART is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-# CONFIG_POWER_RESET_VERSATILE is not set
-# CONFIG_POWER_RESET_XGENE is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_POWER_SUPPLY_HWMON is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_PPC_QUEUED_SPINLOCKS is not set
-# CONFIG_PPP is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPS is not set
-# CONFIG_PPS_CLIENT_GPIO is not set
-# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
-# CONFIG_PPS_CLIENT_PARPORT is not set
-# CONFIG_PPS_DEBUG is not set
-# CONFIG_PPTP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
-# CONFIG_PREEMPTIRQ_EVENTS is not set
-# CONFIG_PREEMPT_DYNAMIC is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PRESTERA is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_PRIME_NUMBERS is not set
-CONFIG_PRINTK=y
-# CONFIG_PRINTK_CALLER is not set
-# CONFIG_PRINTK_INDEX is not set
-CONFIG_PRINTK_NMI=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
-# CONFIG_PRINTK_TIME is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PRISM2_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_PROC_CHILDREN is not set
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-# CONFIG_PROC_STRIPPED is not set
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILING is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PROVE_RAW_LOCK_NESTING is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_LIST is not set
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-# CONFIG_PSAMPLE is not set
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_PSE_CONTROLLER is not set
-# CONFIG_PSI is not set
-# CONFIG_PSTORE is not set
-# CONFIG_PSTORE_842_COMPRESS is not set
-# CONFIG_PSTORE_BLK is not set
-# CONFIG_PSTORE_COMPRESS is not set
-# CONFIG_PSTORE_CONSOLE is not set
-CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
-# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
-# CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT is not set
-# CONFIG_PSTORE_FTRACE is not set
-# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
-# CONFIG_PSTORE_LZ4_COMPRESS is not set
-# CONFIG_PSTORE_LZO_COMPRESS is not set
-# CONFIG_PSTORE_PMSG is not set
-# CONFIG_PSTORE_RAM is not set
-# CONFIG_PSTORE_ZSTD_COMPRESS is not set
-# CONFIG_PTDUMP_DEBUGFS is not set
-# CONFIG_PTP_1588_CLOCK is not set
-# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
-# CONFIG_PTP_1588_CLOCK_IDTCM is not set
-# CONFIG_PTP_1588_CLOCK_IXP46X is not set
-# CONFIG_PTP_1588_CLOCK_KVM is not set
-# CONFIG_PTP_1588_CLOCK_OCP is not set
-# CONFIG_PTP_1588_CLOCK_PCH is not set
-# CONFIG_PTP_1588_CLOCK_VMW is not set
-# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
-# CONFIG_PVPANIC is not set
-# CONFIG_PWM is not set
-# CONFIG_PWM_ATMEL_TCB is not set
-# CONFIG_PWM_CLK is not set
-# CONFIG_PWM_DEBUG is not set
-# CONFIG_PWM_DWC is not set
-# CONFIG_PWM_FSL_FTM is not set
-# CONFIG_PWM_IMG is not set
-# CONFIG_PWM_JZ4740 is not set
-# CONFIG_PWM_MEDIATEK is not set
-# CONFIG_PWM_PCA9685 is not set
-# CONFIG_PWM_RASPBERRYPI_POE is not set
-# CONFIG_PWM_RP1 is not set
-# CONFIG_PWM_XILINX is not set
-CONFIG_PWRSEQ_EMMC=y
-# CONFIG_PWRSEQ_SD8787 is not set
-CONFIG_PWRSEQ_SIMPLE=y
-# CONFIG_QCA7000 is not set
-# CONFIG_QCA7000_SPI is not set
-# CONFIG_QCA7000_UART is not set
-# CONFIG_QCA807X_PHY is not set
-# CONFIG_QCA808X_PHY is not set
-# CONFIG_QCA83XX_PHY is not set
-# CONFIG_QCOM_A7PLL is not set
-# CONFIG_QCOM_BAM_DMUX is not set
-# CONFIG_QCOM_EMAC is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
-# CONFIG_QCOM_GPI_DMA is not set
-# CONFIG_QCOM_HIDMA is not set
-# CONFIG_QCOM_HIDMA_MGMT is not set
-# CONFIG_QCOM_LMH is not set
-# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
-# CONFIG_QCOM_SPMI_ADC5 is not set
-# CONFIG_QCOM_SPMI_ADC_TM5 is not set
-# CONFIG_QCOM_SPMI_IADC is not set
-# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
-# CONFIG_QCOM_SPMI_VADC is not set
-# CONFIG_QCOM_SSC_BLOCK_BUS is not set
-# CONFIG_QED is not set
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_QORIQ_CPUFREQ is not set
-# CONFIG_QORIQ_THERMAL is not set
-# CONFIG_QRTR is not set
-# CONFIG_QRTR_MHI is not set
-# CONFIG_QRTR_TUN is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QUEUED_LOCK_STAT is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_QUOTA is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_QUOTA_DEBUG is not set
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_R8188EU is not set
-# CONFIG_R8712U is not set
-# CONFIG_R8723AU is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID6_PQ_BENCHMARK is not set
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_RALINK is not set
-# CONFIG_RANDOM32_SELFTEST is not set
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RANDOMIZE_KSTACK_OFFSET=y
-# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
-CONFIG_RANDOM_TRUST_BOOTLOADER=y
-CONFIG_RANDOM_TRUST_CPU=y
-# CONFIG_RANDSTRUCT_NONE is not set
-# CONFIG_RAPIDIO is not set
-# CONFIG_RAS is not set
-# CONFIG_RASPBERRYPI_GPIOMEM is not set
-# CONFIG_RBTREE_TEST is not set
-# CONFIG_RCU_BOOST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_RCU_EXPEDITE_BOOT is not set
-# CONFIG_RCU_EXPERT is not set
-CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
-CONFIG_RCU_KTHREAD_PRIO=0
-CONFIG_RCU_NEED_SEGCBLIST=y
-# CONFIG_RCU_PERF_TEST is not set
-# CONFIG_RCU_REF_SCALE_TEST is not set
-# CONFIG_RCU_SCALE_TEST is not set
-CONFIG_RCU_STALL_COMMON=y
-# CONFIG_RCU_STRICT_GRACE_PERIOD is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RC_ATI_REMOTE is not set
-# CONFIG_RC_CORE is not set
-# CONFIG_RC_DECODERS is not set
-# CONFIG_RC_LOOPBACK is not set
-# CONFIG_RC_MAP is not set
-# CONFIG_RC_XBOX_DVD is not set
-# CONFIG_RDS is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_GZIP is not set
-# CONFIG_RD_LZ4 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_RD_ZSTD is not set
-# CONFIG_READABLE_ASM is not set
-# CONFIG_READ_ONLY_THP_FOR_FS is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_REED_SOLOMON is not set
-# CONFIG_REED_SOLOMON_DEC8 is not set
-# CONFIG_REED_SOLOMON_ENC8 is not set
-# CONFIG_REED_SOLOMON_TEST is not set
-# CONFIG_REGMAP is not set
-# CONFIG_REGMAP_I2C is not set
-# CONFIG_REGMAP_MMIO is not set
-# CONFIG_REGMAP_SPI is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_88PG86X is not set
-# CONFIG_REGULATOR_ACT8865 is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ANATOP is not set
-# CONFIG_REGULATOR_DA9121 is not set
-# CONFIG_REGULATOR_DA9210 is not set
-# CONFIG_REGULATOR_DA9211 is not set
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FAN53555 is not set
-# CONFIG_REGULATOR_FAN53880 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_GPIO is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_ISL9305 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-# CONFIG_REGULATOR_LP8755 is not set
-# CONFIG_REGULATOR_LTC3589 is not set
-# CONFIG_REGULATOR_LTC3676 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX20086 is not set
-# CONFIG_REGULATOR_MAX77620 is not set
-# CONFIG_REGULATOR_MAX77826 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8893 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_MCP16502 is not set
-# CONFIG_REGULATOR_MP5416 is not set
-# CONFIG_REGULATOR_MP8859 is not set
-# CONFIG_REGULATOR_MP886X is not set
-# CONFIG_REGULATOR_MPQ7920 is not set
-# CONFIG_REGULATOR_MT6311 is not set
-# CONFIG_REGULATOR_MT6315 is not set
-# CONFIG_REGULATOR_MT6359 is not set
-# CONFIG_REGULATOR_PCA9450 is not set
-# CONFIG_REGULATOR_PF8X00 is not set
-# CONFIG_REGULATOR_PFUZE100 is not set
-# CONFIG_REGULATOR_PV88060 is not set
-# CONFIG_REGULATOR_PV88080 is not set
-# CONFIG_REGULATOR_PV88090 is not set
-# CONFIG_REGULATOR_PWM is not set
-# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set
-# CONFIG_REGULATOR_RT4801 is not set
-# CONFIG_REGULATOR_RT5190A is not set
-# CONFIG_REGULATOR_RT5759 is not set
-# CONFIG_REGULATOR_RT6160 is not set
-# CONFIG_REGULATOR_RT6245 is not set
-# CONFIG_REGULATOR_RTMV20 is not set
-# CONFIG_REGULATOR_RTQ2134 is not set
-# CONFIG_REGULATOR_RTQ6752 is not set
-# CONFIG_REGULATOR_SLG51000 is not set
-# CONFIG_REGULATOR_SY8106A is not set
-# CONFIG_REGULATOR_SY8824X is not set
-# CONFIG_REGULATOR_SY8827N is not set
-# CONFIG_REGULATOR_TI_ABB is not set
-# CONFIG_REGULATOR_TPS51632 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS6286X is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS65132 is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_VCTRL is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
-CONFIG_REISERFS_FS_XATTR=y
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_RELR=y
-# CONFIG_REMOTEPROC is not set
-# CONFIG_RENESAS_PHY is not set
-# CONFIG_RESET_ATH79 is not set
-# CONFIG_RESET_BERLIN is not set
-# CONFIG_RESET_BRCMSTB is not set
-# CONFIG_RESET_BRCMSTB_RESCAL is not set
-# CONFIG_RESET_CONTROLLER is not set
-# CONFIG_RESET_IMX7 is not set
-# CONFIG_RESET_INTEL_GW is not set
-# CONFIG_RESET_LANTIQ is not set
-# CONFIG_RESET_LPC18XX is not set
-# CONFIG_RESET_MESON is not set
-# CONFIG_RESET_PISTACHIO is not set
-# CONFIG_RESET_SIMPLE is not set
-# CONFIG_RESET_SOCFPGA is not set
-# CONFIG_RESET_STM32 is not set
-# CONFIG_RESET_SUNXI is not set
-# CONFIG_RESET_TEGRA_BPMP is not set
-# CONFIG_RESET_TI_SYSCON is not set
-# CONFIG_RESET_TI_TPS380X is not set
-# CONFIG_RESET_ZYNQ is not set
-# CONFIG_RFD77402 is not set
-# CONFIG_RFD_FTL is not set
-CONFIG_RFKILL=y
-# CONFIG_RFKILL_FULL is not set
-# CONFIG_RFKILL_GPIO is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_LEDS is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RICHTEK_RTQ6056 is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_RING_BUFFER_STARTUP_TEST is not set
-# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
-# CONFIG_RISCV_PMU is not set
-# CONFIG_RISCV_PMU_LEGACY is not set
-# CONFIG_RISCV_PMU_SBI is not set
-# CONFIG_RMI4_CORE is not set
-# CONFIG_RMNET is not set
-# CONFIG_ROCKCHIP_PHY is not set
-# CONFIG_ROCKER is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
-# CONFIG_RPMSG_VIRTIO is not set
-# CONFIG_RPMSG_WWAN_CTRL is not set
-# CONFIG_RPR0521 is not set
-# CONFIG_RSEQ is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_ABB5ZES3 is not set
-# CONFIG_RTC_DRV_ABEOZ9 is not set
-# CONFIG_RTC_DRV_ABX80X is not set
-# CONFIG_RTC_DRV_ARMADA38X is not set
-# CONFIG_RTC_DRV_AU1XXX is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_CADENCE is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1302 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1307_CENTURY is not set
-# CONFIG_RTC_DRV_DS1307_HWMON is not set
-# CONFIG_RTC_DRV_DS1343 is not set
-# CONFIG_RTC_DRV_DS1347 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1685_FAMILY is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS2404 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_EP93XX is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_FTRTC010 is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_RTC_DRV_GOLDFISH is not set
-# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
-# CONFIG_RTC_DRV_HYM8563 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_ISL12026 is not set
-# CONFIG_RTC_DRV_ISL12057 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_JZ4740 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_MAX6916 is not set
-# CONFIG_RTC_DRV_MAX77686 is not set
-# CONFIG_RTC_DRV_MCP795 is not set
-# CONFIG_RTC_DRV_MOXART is not set
-# CONFIG_RTC_DRV_MPC5121 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_MT2712 is not set
-# CONFIG_RTC_DRV_NCT3018Y is not set
-# CONFIG_RTC_DRV_OMAP is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-# CONFIG_RTC_DRV_PCF2127 is not set
-# CONFIG_RTC_DRV_PCF85063 is not set
-# CONFIG_RTC_DRV_PCF8523 is not set
-# CONFIG_RTC_DRV_PCF85363 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_PS3 is not set
-# CONFIG_RTC_DRV_PT7C4338 is not set
-# CONFIG_RTC_DRV_R7301 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RV3028 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-# CONFIG_RTC_DRV_RV3032 is not set
-# CONFIG_RTC_DRV_RV8803 is not set
-# CONFIG_RTC_DRV_RX4581 is not set
-# CONFIG_RTC_DRV_RX6110 is not set
-# CONFIG_RTC_DRV_RX8010 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_SD3078 is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_SUN6I is not set
-# CONFIG_RTC_DRV_TEGRA is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_XGENE is not set
-# CONFIG_RTC_DRV_ZYNQMP is not set
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_NVMEM is not set
-CONFIG_RTC_SYSTOHC=y
-CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366RB_PHY is not set
-# CONFIG_RTL8366S_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-# CONFIG_RTL8366_SMI_DEBUG_FS is not set
-# CONFIG_RTL8367B_PHY is not set
-# CONFIG_RTL8367_PHY is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_RTL_CARDS is not set
-# CONFIG_RTS5208 is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RUNTIME_TESTING_MENU=y
-# CONFIG_RV is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_RXKAD=y
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SAMSUNG_LAPTOP is not set
-# CONFIG_SATA_ACARD_AHCI is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_DWC is not set
-# CONFIG_SATA_DWC_OLD_DMA is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_HIGHBANK is not set
-# CONFIG_SATA_HOST is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_MOBILE_LPM_POLICY=0
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_RCAR is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SBC_FITPC2_WATCHDOG is not set
-CONFIG_SBITMAP=y
-# CONFIG_SC92031 is not set
-# CONFIG_SCA3000 is not set
-# CONFIG_SCA3300 is not set
-# CONFIG_SCACHE_DEBUGFS is not set
-# CONFIG_SCC is not set
-# CONFIG_SCD30_CORE is not set
-# CONFIG_SCD4X is not set
-# CONFIG_SCF_TORTURE_TEST is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_AUTOGROUP is not set
-# CONFIG_SCHED_CLUSTER is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_MC is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCHED_SMT is not set
-CONFIG_SCHED_STACK_END_CHECK=y
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCR24X is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CHELSIO_FCOE is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESAS2R is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FDOMAIN_PCI is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HISI_SAS is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCI is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_LPFC is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_MPI3MR is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-# CONFIG_SCSI_MQ_DEFAULT is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_MYRB is not set
-# CONFIG_SCSI_MYRS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_PMCRAID is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SMARTPQI is not set
-# CONFIG_SCSI_SNIC is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_VIRTIO is not set
-# CONFIG_SCSI_WD719X is not set
-# CONFIG_SC_CAMCC_7180 is not set
-# CONFIG_SC_DISPCC_7280 is not set
-# CONFIG_SC_GCC_7280 is not set
-# CONFIG_SC_GCC_8180X is not set
-# CONFIG_SC_GPUCC_7280 is not set
-# CONFIG_SC_GPUCC_8280XP is not set
-# CONFIG_SC_VIDEOCC_7280 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SDM_GPUCC_660 is not set
-# CONFIG_SDM_MMCC_660 is not set
-# CONFIG_SDR_MAX2175 is not set
-# CONFIG_SDR_PLATFORM_DRIVERS is not set
-# CONFIG_SDX_GCC_55 is not set
-# CONFIG_SD_ADC_MODULATOR is not set
-# CONFIG_SECCOMP is not set
-# CONFIG_SECCOMP_CACHE_DEBUG is not set
-CONFIG_SECTION_MISMATCH_WARN_ONLY=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_APPARMOR is not set
-CONFIG_SECURITY_DMESG_RESTRICT=y
-# CONFIG_SECURITY_LANDLOCK is not set
-# CONFIG_SECURITY_LOADPIN is not set
-# CONFIG_SECURITY_LOCKDOWN_LSM is not set
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_SAFESETID is not set
-# CONFIG_SECURITY_SELINUX_AVC_STATS is not set
-# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
-# CONFIG_SECURITY_SELINUX_DEVELOP is not set
-# CONFIG_SECURITY_SELINUX_DISABLE is not set
-# CONFIG_SECURITY_SMACK is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_SECURITY_YAMA is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
-# CONFIG_SENSIRION_SGP30 is not set
-# CONFIG_SENSIRION_SGP40 is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_ACPI_POWER is not set
-# CONFIG_SENSORS_AD7314 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADC128D818 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM1177 is not set
-# CONFIG_SENSORS_ADM1266 is not set
-# CONFIG_SENSORS_ADM1275 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS1015 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_ADT7310 is not set
-# CONFIG_SENSORS_ADT7410 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_AHT10 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
-# CONFIG_SENSORS_AS370 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ASPEED is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
-# CONFIG_SENSORS_BEL_PFE is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_BPA_RS600 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_CORSAIR_CPRO is not set
-# CONFIG_SENSORS_CORSAIR_PSU is not set
-# CONFIG_SENSORS_DELL_SMM is not set
-# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DPS920AB is not set
-# CONFIG_SENSORS_DRIVETEMP is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_DS620 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_EMC2103 is not set
-# CONFIG_SENSORS_EMC2305 is not set
-# CONFIG_SENSORS_EMC6W201 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FAM15H_POWER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_FSP_3Y is not set
-# CONFIG_SENSORS_FTSTEUTATES is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_G762 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_GPIO_FAN is not set
-# CONFIG_SENSORS_GSC is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_HIH6130 is not set
-# CONFIG_SENSORS_HMC5843 is not set
-# CONFIG_SENSORS_HMC5843_I2C is not set
-# CONFIG_SENSORS_HMC5843_SPI is not set
-# CONFIG_SENSORS_HTU21 is not set
-# CONFIG_SENSORS_I5500 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IBM_CFFPS is not set
-# CONFIG_SENSORS_IIO_HWMON is not set
-# CONFIG_SENSORS_INA209 is not set
-# CONFIG_SENSORS_INA238 is not set
-# CONFIG_SENSORS_INA2XX is not set
-# CONFIG_SENSORS_INA3221 is not set
-# CONFIG_SENSORS_INSPUR_IPSPS is not set
-# CONFIG_SENSORS_IR35221 is not set
-# CONFIG_SENSORS_IR36021 is not set
-# CONFIG_SENSORS_IR38064 is not set
-# CONFIG_SENSORS_IRPS5401 is not set
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_SENSORS_ISL29028 is not set
-# CONFIG_SENSORS_ISL68137 is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_K10TEMP is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LINEAGE is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LM25066 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LM95234 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_LM95245 is not set
-# CONFIG_SENSORS_LT7182S is not set
-# CONFIG_SENSORS_LTC2945 is not set
-# CONFIG_SENSORS_LTC2947_I2C is not set
-# CONFIG_SENSORS_LTC2947_SPI is not set
-# CONFIG_SENSORS_LTC2978 is not set
-# CONFIG_SENSORS_LTC2990 is not set
-# CONFIG_SENSORS_LTC2992 is not set
-# CONFIG_SENSORS_LTC3815 is not set
-# CONFIG_SENSORS_LTC4151 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4222 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LTC4260 is not set
-# CONFIG_SENSORS_LTC4261 is not set
-# CONFIG_SENSORS_LTQ_CPUTEMP is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX127 is not set
-# CONFIG_SENSORS_MAX15301 is not set
-# CONFIG_SENSORS_MAX16064 is not set
-# CONFIG_SENSORS_MAX16065 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX16601 is not set
-# CONFIG_SENSORS_MAX1668 is not set
-# CONFIG_SENSORS_MAX197 is not set
-# CONFIG_SENSORS_MAX20730 is not set
-# CONFIG_SENSORS_MAX20751 is not set
-# CONFIG_SENSORS_MAX31722 is not set
-# CONFIG_SENSORS_MAX31730 is not set
-# CONFIG_SENSORS_MAX31760 is not set
-# CONFIG_SENSORS_MAX31785 is not set
-# CONFIG_SENSORS_MAX31790 is not set
-# CONFIG_SENSORS_MAX34440 is not set
-# CONFIG_SENSORS_MAX6620 is not set
-# CONFIG_SENSORS_MAX6621 is not set
-# CONFIG_SENSORS_MAX6639 is not set
-# CONFIG_SENSORS_MAX6642 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6697 is not set
-# CONFIG_SENSORS_MAX8688 is not set
-# CONFIG_SENSORS_MCP3021 is not set
-# CONFIG_SENSORS_MP2888 is not set
-# CONFIG_SENSORS_MP2975 is not set
-# CONFIG_SENSORS_MP5023 is not set
-# CONFIG_SENSORS_MR75203 is not set
-# CONFIG_SENSORS_NCT6683 is not set
-# CONFIG_SENSORS_NCT6775 is not set
-# CONFIG_SENSORS_NCT6775_I2C is not set
-# CONFIG_SENSORS_NCT7802 is not set
-# CONFIG_SENSORS_NCT7904 is not set
-# CONFIG_SENSORS_NPCM7XX is not set
-# CONFIG_SENSORS_NSA320 is not set
-# CONFIG_SENSORS_NTC_THERMISTOR is not set
-# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
-# CONFIG_SENSORS_NZXT_SMART2 is not set
-# CONFIG_SENSORS_OCC_P8_I2C is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_PIM4328 is not set
-# CONFIG_SENSORS_PLI1209BC is not set
-# CONFIG_SENSORS_PM6764TR is not set
-# CONFIG_SENSORS_PMBUS is not set
-# CONFIG_SENSORS_POWR1220 is not set
-# CONFIG_SENSORS_PWM_FAN is not set
-# CONFIG_SENSORS_PXE1610 is not set
-# CONFIG_SENSORS_Q54SJ108A2 is not set
-# CONFIG_SENSORS_RM3100_I2C is not set
-# CONFIG_SENSORS_RM3100_SPI is not set
-# CONFIG_SENSORS_RP1_ADC is not set
-# CONFIG_SENSORS_SBRMI is not set
-# CONFIG_SENSORS_SBTSI is not set
-# CONFIG_SENSORS_SCH5627 is not set
-# CONFIG_SENSORS_SCH5636 is not set
-# CONFIG_SENSORS_SCH56XX_COMMON is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SHT21 is not set
-# CONFIG_SENSORS_SHT3x is not set
-# CONFIG_SENSORS_SHT4x is not set
-# CONFIG_SENSORS_SHTC1 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMM665 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_STPDDC60 is not set
-# CONFIG_SENSORS_STTS751 is not set
-# CONFIG_SENSORS_TC654 is not set
-# CONFIG_SENSORS_TC74 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP103 is not set
-# CONFIG_SENSORS_TMP108 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_TMP464 is not set
-# CONFIG_SENSORS_TMP513 is not set
-# CONFIG_SENSORS_TPS23861 is not set
-# CONFIG_SENSORS_TPS40422 is not set
-# CONFIG_SENSORS_TPS53679 is not set
-# CONFIG_SENSORS_TPS546D24 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_SENSORS_UCD9000 is not set
-# CONFIG_SENSORS_UCD9200 is not set
-# CONFIG_SENSORS_VEXPRESS is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VIA_CPUTEMP is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83773G is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83795 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_XDPE122 is not set
-# CONFIG_SENSORS_XDPE152 is not set
-# CONFIG_SENSORS_XGENE is not set
-# CONFIG_SENSORS_ZL6100 is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_16550A_VARIANTS=y
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_ASPEED_VUART is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_DMA=y
-# CONFIG_SERIAL_8250_DW is not set
-# CONFIG_SERIAL_8250_EM is not set
-# CONFIG_SERIAL_8250_EXAR is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_FINTEK is not set
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-# CONFIG_SERIAL_8250_INGENIC is not set
-# CONFIG_SERIAL_8250_LPSS is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_MID is not set
-# CONFIG_SERIAL_8250_MOXA is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_PERICOM is not set
-# CONFIG_SERIAL_8250_RSA is not set
-# CONFIG_SERIAL_8250_RT288X is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-# CONFIG_SERIAL_ARC is not set
-# CONFIG_SERIAL_BCM63XX is not set
-# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_DEV_BUS is not set
-CONFIG_SERIAL_EARLYCON=y
-# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
-# CONFIG_SERIAL_FSL_LINFLEXUART is not set
-# CONFIG_SERIAL_FSL_LPUART is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_RP2 is not set
-# CONFIG_SERIAL_SC16IS7XX is not set
-# CONFIG_SERIAL_SCCNXP is not set
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_SIFIVE is not set
-# CONFIG_SERIAL_SPRD is not set
-# CONFIG_SERIAL_STM32 is not set
-# CONFIG_SERIAL_ST_ASC is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_APBPS2 is not set
-# CONFIG_SERIO_ARC_PS2 is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_GPIO_PS2 is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_SUN4I_PS2 is not set
-# CONFIG_SFC is not set
-# CONFIG_SFC_FALCON is not set
-# CONFIG_SFC_SIENA is not set
-# CONFIG_SFI is not set
-# CONFIG_SFP is not set
-# CONFIG_SF_PDMA is not set
-# CONFIG_SGETMASK_SYSCALL is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP30 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SGI_MFD_IOC3 is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SG_POOL is not set
-# CONFIG_SG_SPLIT is not set
-# CONFIG_SHADOW_CALL_STACK is not set
-CONFIG_SHMEM=y
-# CONFIG_SHRINKER_DEBUG is not set
-# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
-# CONFIG_SH_ETH is not set
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SH_TIMER_MTU2 is not set
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SI1133 is not set
-# CONFIG_SI1145 is not set
-# CONFIG_SI7005 is not set
-# CONFIG_SI7020 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SIGNALFD=y
-# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SIMPLE_PM_BUS is not set
-# CONFIG_SIOX is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLABINFO=y
-CONFIG_SLAB_FREELIST_HARDENED=y
-CONFIG_SLAB_FREELIST_RANDOM=y
-CONFIG_SLAB_MERGE_DEFAULT=y
-# CONFIG_SLHC is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_SLIMBUS is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_CPU_PARTIAL=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_SMB_SERVER is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC9194 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SMS_SDIO_DRV is not set
-# CONFIG_SMS_USB_DRV is not set
-# CONFIG_SM_CAMCC_8250 is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_SM_GCC_6115 is not set
-# CONFIG_SM_GCC_6125 is not set
-# CONFIG_SM_GCC_6350 is not set
-# CONFIG_SM_GCC_6375 is not set
-# CONFIG_SM_GCC_8350 is not set
-# CONFIG_SND is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALOOP is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_AMD_ACP_CONFIG is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_ASIHPI is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AUDIO_GRAPH_CARD is not set
-# CONFIG_SND_AUDIO_GRAPH_CARD2 is not set
-# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BCD2000 is not set
-# CONFIG_SND_BCM2835 is not set
-# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTL_FAST_LOOKUP is not set
-# CONFIG_SND_CTL_INPUT_VALIDATION is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_DESIGNWARE_I2S is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FIREWIRE is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_CODEC_CS8409 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDA_INTEL_DETECT_DMIC is not set
-# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
-CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
-CONFIG_SND_HDA_PREALLOC_SIZE=64
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_I2S_HI6210_I2S is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND_JZ4740_SOC_I2S is not set
-# CONFIG_SND_KIRKWOOD_SOC is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_LOLA is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-CONFIG_SND_MAX_CARDS=16
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_MXS_SOC is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCM_TIMER is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-# CONFIG_SND_POWERPC_SOC is not set
-# CONFIG_SND_PPC is not set
-CONFIG_SND_PROC_FS=y
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_SE6X is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_GENERIC is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SIMPLE_CARD is not set
-# CONFIG_SND_SIMPLE_SCU_CARD is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_AD193X_I2C is not set
-# CONFIG_SND_SOC_AD193X_SPI is not set
-# CONFIG_SND_SOC_ADAU1372_I2C is not set
-# CONFIG_SND_SOC_ADAU1372_SPI is not set
-# CONFIG_SND_SOC_ADAU1701 is not set
-# CONFIG_SND_SOC_ADAU1761_I2C is not set
-# CONFIG_SND_SOC_ADAU1761_SPI is not set
-# CONFIG_SND_SOC_ADAU7002 is not set
-# CONFIG_SND_SOC_ADAU7118_HW is not set
-# CONFIG_SND_SOC_ADAU7118_I2C is not set
-# CONFIG_SND_SOC_ADI is not set
-# CONFIG_SND_SOC_AK4104 is not set
-# CONFIG_SND_SOC_AK4118 is not set
-# CONFIG_SND_SOC_AK4375 is not set
-# CONFIG_SND_SOC_AK4458 is not set
-# CONFIG_SND_SOC_AK4554 is not set
-# CONFIG_SND_SOC_AK4613 is not set
-# CONFIG_SND_SOC_AK4642 is not set
-# CONFIG_SND_SOC_AK5386 is not set
-# CONFIG_SND_SOC_AK5558 is not set
-# CONFIG_SND_SOC_ALC5623 is not set
-# CONFIG_SND_SOC_AMD_ACP is not set
-# CONFIG_SND_SOC_AMD_ACP3x is not set
-# CONFIG_SND_SOC_AMD_ACP5x is not set
-# CONFIG_SND_SOC_AMD_RENOIR is not set
-# CONFIG_SND_SOC_AU1XAUDIO is not set
-# CONFIG_SND_SOC_AU1XPSC is not set
-# CONFIG_SND_SOC_AW8738 is not set
-# CONFIG_SND_SOC_BD28623 is not set
-# CONFIG_SND_SOC_BT_SCO is not set
-# CONFIG_SND_SOC_CS35L32 is not set
-# CONFIG_SND_SOC_CS35L33 is not set
-# CONFIG_SND_SOC_CS35L34 is not set
-# CONFIG_SND_SOC_CS35L35 is not set
-# CONFIG_SND_SOC_CS35L36 is not set
-# CONFIG_SND_SOC_CS35L41_I2C is not set
-# CONFIG_SND_SOC_CS35L41_SPI is not set
-# CONFIG_SND_SOC_CS35L45_I2C is not set
-# CONFIG_SND_SOC_CS35L45_SPI is not set
-# CONFIG_SND_SOC_CS4234 is not set
-# CONFIG_SND_SOC_CS4265 is not set
-# CONFIG_SND_SOC_CS4270 is not set
-# CONFIG_SND_SOC_CS4271 is not set
-# CONFIG_SND_SOC_CS4271_I2C is not set
-# CONFIG_SND_SOC_CS4271_SPI is not set
-# CONFIG_SND_SOC_CS42L42 is not set
-# CONFIG_SND_SOC_CS42L51_I2C is not set
-# CONFIG_SND_SOC_CS42L52 is not set
-# CONFIG_SND_SOC_CS42L56 is not set
-# CONFIG_SND_SOC_CS42L73 is not set
-# CONFIG_SND_SOC_CS42L83 is not set
-# CONFIG_SND_SOC_CS42XX8_I2C is not set
-# CONFIG_SND_SOC_CS43130 is not set
-# CONFIG_SND_SOC_CS4341 is not set
-# CONFIG_SND_SOC_CS4349 is not set
-# CONFIG_SND_SOC_CS53L30 is not set
-# CONFIG_SND_SOC_CX2072X is not set
-# CONFIG_SND_SOC_DA7213 is not set
-# CONFIG_SND_SOC_DIO2125 is not set
-# CONFIG_SND_SOC_DMIC is not set
-# CONFIG_SND_SOC_ES7134 is not set
-# CONFIG_SND_SOC_ES7241 is not set
-# CONFIG_SND_SOC_ES8316 is not set
-# CONFIG_SND_SOC_ES8326 is not set
-# CONFIG_SND_SOC_ES8328 is not set
-# CONFIG_SND_SOC_ES8328_I2C is not set
-# CONFIG_SND_SOC_ES8328_SPI is not set
-# CONFIG_SND_SOC_EUKREA_TLV320 is not set
-# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
-# CONFIG_SND_SOC_FSL_ASRC is not set
-# CONFIG_SND_SOC_FSL_AUD2HTX is not set
-# CONFIG_SND_SOC_FSL_AUDMIX is not set
-# CONFIG_SND_SOC_FSL_ESAI is not set
-# CONFIG_SND_SOC_FSL_MICFIL is not set
-# CONFIG_SND_SOC_FSL_RPMSG is not set
-# CONFIG_SND_SOC_FSL_SAI is not set
-# CONFIG_SND_SOC_FSL_SPDIF is not set
-# CONFIG_SND_SOC_FSL_SSI is not set
-# CONFIG_SND_SOC_FSL_XCVR is not set
-# CONFIG_SND_SOC_GTM601 is not set
-# CONFIG_SND_SOC_HDA is not set
-# CONFIG_SND_SOC_ICS43432 is not set
-# CONFIG_SND_SOC_IMG is not set
-# CONFIG_SND_SOC_IMX_AUDMIX is not set
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-# CONFIG_SND_SOC_IMX_CARD is not set
-# CONFIG_SND_SOC_IMX_ES8328 is not set
-# CONFIG_SND_SOC_IMX_HDMI is not set
-# CONFIG_SND_SOC_IMX_RPMSG is not set
-# CONFIG_SND_SOC_IMX_SPDIF is not set
-# CONFIG_SND_SOC_IMX_WM8962 is not set
-# CONFIG_SND_SOC_INNO_RK3036 is not set
-# CONFIG_SND_SOC_INTEL_APL is not set
-# CONFIG_SND_SOC_INTEL_BAYTRAIL is not set
-# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_CATPT is not set
-# CONFIG_SND_SOC_INTEL_CFL is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set
-# CONFIG_SND_SOC_INTEL_CML_H is not set
-# CONFIG_SND_SOC_INTEL_CML_LP is not set
-# CONFIG_SND_SOC_INTEL_CNL is not set
-# CONFIG_SND_SOC_INTEL_GLK is not set
-# CONFIG_SND_SOC_INTEL_HASWELL is not set
-# CONFIG_SND_SOC_INTEL_KBL is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_KEEMBAY is not set
-# CONFIG_SND_SOC_INTEL_SKL is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKYLAKE is not set
-# CONFIG_SND_SOC_INTEL_SST is not set
-CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
-# CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES is not set
-# CONFIG_SND_SOC_JZ4725B_CODEC is not set
-# CONFIG_SND_SOC_JZ4740_CODEC is not set
-# CONFIG_SND_SOC_JZ4770_CODEC is not set
-# CONFIG_SND_SOC_LPASS_RX_MACRO is not set
-# CONFIG_SND_SOC_LPASS_TX_MACRO is not set
-# CONFIG_SND_SOC_LPASS_VA_MACRO is not set
-# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set
-# CONFIG_SND_SOC_MA120X0P is not set
-# CONFIG_SND_SOC_MAX9759 is not set
-# CONFIG_SND_SOC_MAX98088 is not set
-# CONFIG_SND_SOC_MAX98357A is not set
-# CONFIG_SND_SOC_MAX98373 is not set
-# CONFIG_SND_SOC_MAX98373_I2C is not set
-# CONFIG_SND_SOC_MAX98390 is not set
-# CONFIG_SND_SOC_MAX98396 is not set
-# CONFIG_SND_SOC_MAX98504 is not set
-# CONFIG_SND_SOC_MAX98520 is not set
-# CONFIG_SND_SOC_MAX9860 is not set
-# CONFIG_SND_SOC_MAX9867 is not set
-# CONFIG_SND_SOC_MAX98927 is not set
-# CONFIG_SND_SOC_MEDIATEK is not set
-# CONFIG_SND_SOC_MPC5200_AC97 is not set
-# CONFIG_SND_SOC_MPC5200_I2S is not set
-# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
-# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
-# CONFIG_SND_SOC_MT2701 is not set
-# CONFIG_SND_SOC_MT6351 is not set
-# CONFIG_SND_SOC_MT6358 is not set
-# CONFIG_SND_SOC_MT6359 is not set
-# CONFIG_SND_SOC_MT6359_ACCDET is not set
-# CONFIG_SND_SOC_MT6660 is not set
-# CONFIG_SND_SOC_MT6797 is not set
-# CONFIG_SND_SOC_MT8173 is not set
-# CONFIG_SND_SOC_MT8183 is not set
-# CONFIG_SND_SOC_MT8186 is not set
-# CONFIG_SND_SOC_MT8192 is not set
-# CONFIG_SND_SOC_MT8195 is not set
-# CONFIG_SND_SOC_MTK_BTCVSD is not set
-# CONFIG_SND_SOC_NAU8315 is not set
-# CONFIG_SND_SOC_NAU8540 is not set
-# CONFIG_SND_SOC_NAU8810 is not set
-# CONFIG_SND_SOC_NAU8821 is not set
-# CONFIG_SND_SOC_NAU8822 is not set
-# CONFIG_SND_SOC_NAU8824 is not set
-# CONFIG_SND_SOC_PCM1681 is not set
-# CONFIG_SND_SOC_PCM1789_I2C is not set
-# CONFIG_SND_SOC_PCM1792A is not set
-# CONFIG_SND_SOC_PCM179X_I2C is not set
-# CONFIG_SND_SOC_PCM179X_SPI is not set
-# CONFIG_SND_SOC_PCM186X_I2C is not set
-# CONFIG_SND_SOC_PCM186X_SPI is not set
-# CONFIG_SND_SOC_PCM3060_I2C is not set
-# CONFIG_SND_SOC_PCM3060_SPI is not set
-# CONFIG_SND_SOC_PCM3168A_I2C is not set
-# CONFIG_SND_SOC_PCM3168A_SPI is not set
-# CONFIG_SND_SOC_PCM5102A is not set
-# CONFIG_SND_SOC_PCM512x_I2C is not set
-# CONFIG_SND_SOC_PCM512x_SPI is not set
-# CONFIG_SND_SOC_QCOM is not set
-# CONFIG_SND_SOC_RK3328 is not set
-# CONFIG_SND_SOC_RK817 is not set
-# CONFIG_SND_SOC_ROCKCHIP is not set
-# CONFIG_SND_SOC_RT5616 is not set
-# CONFIG_SND_SOC_RT5631 is not set
-# CONFIG_SND_SOC_RT5640 is not set
-# CONFIG_SND_SOC_RT5659 is not set
-# CONFIG_SND_SOC_RT5677_SPI is not set
-# CONFIG_SND_SOC_RT9120 is not set
-# CONFIG_SND_SOC_SGTL5000 is not set
-# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
-# CONFIG_SND_SOC_SIMPLE_MUX is not set
-# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
-# CONFIG_SND_SOC_SOF_TOPLEVEL is not set
-# CONFIG_SND_SOC_SPDIF is not set
-# CONFIG_SND_SOC_SRC4XXX_I2C is not set
-# CONFIG_SND_SOC_SSM2305 is not set
-# CONFIG_SND_SOC_SSM2518 is not set
-# CONFIG_SND_SOC_SSM2602_I2C is not set
-# CONFIG_SND_SOC_SSM2602_SPI is not set
-# CONFIG_SND_SOC_SSM4567 is not set
-# CONFIG_SND_SOC_STA32X is not set
-# CONFIG_SND_SOC_STA350 is not set
-# CONFIG_SND_SOC_STI_SAS is not set
-# CONFIG_SND_SOC_TAS2552 is not set
-# CONFIG_SND_SOC_TAS2562 is not set
-# CONFIG_SND_SOC_TAS2764 is not set
-# CONFIG_SND_SOC_TAS2770 is not set
-# CONFIG_SND_SOC_TAS2780 is not set
-# CONFIG_SND_SOC_TAS5086 is not set
-# CONFIG_SND_SOC_TAS571X is not set
-# CONFIG_SND_SOC_TAS5720 is not set
-# CONFIG_SND_SOC_TAS5805M is not set
-# CONFIG_SND_SOC_TAS6424 is not set
-# CONFIG_SND_SOC_TDA7419 is not set
-# CONFIG_SND_SOC_TFA9879 is not set
-# CONFIG_SND_SOC_TFA989X is not set
-# CONFIG_SND_SOC_TLV320ADC3XXX is not set
-# CONFIG_SND_SOC_TLV320ADCX140 is not set
-# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC31XX is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC3X is not set
-# CONFIG_SND_SOC_TLV320AIC3X_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC3X_SPI is not set
-# CONFIG_SND_SOC_TPA6130A2 is not set
-# CONFIG_SND_SOC_TS3A227E is not set
-# CONFIG_SND_SOC_TSCS42XX is not set
-# CONFIG_SND_SOC_TSCS454 is not set
-# CONFIG_SND_SOC_UDA1334 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8523 is not set
-# CONFIG_SND_SOC_WM8524 is not set
-# CONFIG_SND_SOC_WM8580 is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8728 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8731_I2C is not set
-# CONFIG_SND_SOC_WM8731_SPI is not set
-# CONFIG_SND_SOC_WM8737 is not set
-# CONFIG_SND_SOC_WM8741 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8770 is not set
-# CONFIG_SND_SOC_WM8776 is not set
-# CONFIG_SND_SOC_WM8782 is not set
-# CONFIG_SND_SOC_WM8804_I2C is not set
-# CONFIG_SND_SOC_WM8804_SPI is not set
-# CONFIG_SND_SOC_WM8903 is not set
-# CONFIG_SND_SOC_WM8904 is not set
-# CONFIG_SND_SOC_WM8940 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_SOC_WM8985 is not set
-# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
-# CONFIG_SND_SOC_XILINX_I2S is not set
-# CONFIG_SND_SOC_XILINX_SPDIF is not set
-# CONFIG_SND_SOC_XTFPGA_I2S is not set
-# CONFIG_SND_SOC_ZL38060 is not set
-# CONFIG_SND_SOC_ZX_AUD96P22 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set
-# CONFIG_SND_SUN4I_CODEC is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TEST_COMPONENT is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_6FIRE is not set
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_HIFACE is not set
-# CONFIG_SND_USB_POD is not set
-# CONFIG_SND_USB_PODHD is not set
-# CONFIG_SND_USB_TONEPORT is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_VARIAX is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTIO is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-CONFIG_SND_X86=y
-# CONFIG_SND_XEN_FRONTEND is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
-# CONFIG_SOCK_CGROUP_DATA is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_SOC_BRCMSTB is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_SOC_HAS_OMAP2_SDRC is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_TI is not set
-# CONFIG_SOFTLOCKUP_DETECTOR is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUNDWIRE is not set
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SP5100_TCO is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPARSE_IRQ is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_SPEAKUP is not set
-# CONFIG_SPI is not set
-# CONFIG_SPINLOCK_TEST is not set
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_AMD is not set
-# CONFIG_SPI_AU1550 is not set
-# CONFIG_SPI_AX88796C is not set
-# CONFIG_SPI_AXI_SPI_ENGINE is not set
-# CONFIG_SPI_BCM2835 is not set
-# CONFIG_SPI_BCM63XX_HSSPI is not set
-# CONFIG_SPI_BCM_QSPI is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_SPI_CADENCE_XSPI is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_FSL_DSPI is not set
-# CONFIG_SPI_FSL_ESPI is not set
-# CONFIG_SPI_FSL_SPI is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI_IMG_SPFI is not set
-# CONFIG_SPI_LANTIQ_SSC is not set
-# CONFIG_SPI_LM70_LLP is not set
-# CONFIG_SPI_LOOPBACK_TEST is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_MEM is not set
-# CONFIG_SPI_MICROCHIP_CORE is not set
-# CONFIG_SPI_MICROCHIP_CORE_QSPI is not set
-# CONFIG_SPI_MPC52xx is not set
-# CONFIG_SPI_MPC52xx_PSC is not set
-# CONFIG_SPI_MTK_QUADSPI is not set
-# CONFIG_SPI_MUX is not set
-# CONFIG_SPI_MXIC is not set
-# CONFIG_SPI_NXP_FLEXSPI is not set
-# CONFIG_SPI_OCTEON is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_ORION is not set
-# CONFIG_SPI_PL022 is not set
-# CONFIG_SPI_PPC4xx is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_QCOM_QSPI is not set
-# CONFIG_SPI_ROCKCHIP is not set
-# CONFIG_SPI_S3C64XX is not set
-# CONFIG_SPI_SC18IS602 is not set
-# CONFIG_SPI_SIFIVE is not set
-# CONFIG_SPI_SLAVE is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_THUNDERX is not set
-# CONFIG_SPI_TI_QSPI is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XCOMM is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_XWAY is not set
-# CONFIG_SPI_ZYNQMP_GQSPI is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SPMI is not set
-# CONFIG_SPS30 is not set
-# CONFIG_SPS30_I2C is not set
-# CONFIG_SPS30_SERIAL is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI is not set
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
-CONFIG_SQUASHFS_EMBEDDED=y
-# CONFIG_SQUASHFS_FILE_CACHE is not set
-CONFIG_SQUASHFS_FILE_DIRECT=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_LZ4 is not set
-# CONFIG_SQUASHFS_LZO is not set
-# CONFIG_SQUASHFS_XATTR is not set
-CONFIG_SQUASHFS_XZ=y
-# CONFIG_SQUASHFS_ZLIB is not set
-# CONFIG_SQUASHFS_ZSTD is not set
-# CONFIG_SRAM is not set
-# CONFIG_SRF04 is not set
-# CONFIG_SRF08 is not set
-# CONFIG_SSB is not set
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB_DRIVER_GPIO is not set
-# CONFIG_SSB_HOST_SOC is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-# CONFIG_STACKPROTECTOR is not set
-# CONFIG_STACKPROTECTOR_PER_TASK is not set
-# CONFIG_STACKPROTECTOR_STRONG is not set
-# CONFIG_STACKTRACE is not set
-# CONFIG_STACKTRACE_BUILD_ID is not set
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_STACK_HASH_ORDER=20
-# CONFIG_STACK_TRACER is not set
-# CONFIG_STACK_VALIDATION is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_BOARD is not set
-# CONFIG_STAGING_GASKET_FRAMEWORK is not set
-# CONFIG_STAGING_MEDIA is not set
-CONFIG_STANDALONE=y
-# CONFIG_STATIC_KEYS_SELFTEST is not set
-# CONFIG_STATIC_USERMODEHELPER is not set
-CONFIG_STDBINUTILS=y
-# CONFIG_STE10XP is not set
-# CONFIG_STE_MODEM_RPROC is not set
-# CONFIG_STK3310 is not set
-# CONFIG_STK8312 is not set
-# CONFIG_STK8BA50 is not set
-# CONFIG_STM is not set
-# CONFIG_STMMAC_ETH is not set
-# CONFIG_STMMAC_PCI is not set
-# CONFIG_STMMAC_PLATFORM is not set
-# CONFIG_STMMAC_SELFTESTS is not set
-# CONFIG_STMPE_ADC is not set
-# CONFIG_STM_DUMMY is not set
-# CONFIG_STM_SOURCE_CONSOLE is not set
-CONFIG_STP=y
-# CONFIG_STREAM_PARSER is not set
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-# CONFIG_STRING_SELFTEST is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_STX104 is not set
-# CONFIG_ST_UVIS25 is not set
-# CONFIG_SUN4I_GPADC is not set
-# CONFIG_SUN50I_DE2_BUS is not set
-# CONFIG_SUN50I_ERRATUM_UNKNOWN1 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_DEBUG is not set
-CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUNXI_SRAM is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_SURFACE_3_BUTTON is not set
-# CONFIG_SURFACE_PLATFORMS is not set
-# CONFIG_SUSPEND is not set
-# CONFIG_SUSPEND_SKIP_SYNC is not set
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SWCONFIG_B53 is not set
-# CONFIG_SWCONFIG_B53_MDIO_DRIVER is not set
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-# CONFIG_SWCONFIG_LEDS is not set
-# CONFIG_SW_SYNC is not set
-# CONFIG_SX9310 is not set
-# CONFIG_SX9324 is not set
-# CONFIG_SX9360 is not set
-# CONFIG_SX9500 is not set
-# CONFIG_SXGBE_ETH is not set
-CONFIG_SYMBOLIC_ERRNAME=y
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_SYNC_FILE is not set
-# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
-# CONFIG_SYNTH_EVENTS is not set
-# CONFIG_SYNTH_EVENT_GEN_TEST is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_SYSCON_REBOOT_MODE is not set
-CONFIG_SYSCTL=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYSFS=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_SYSTEMPORT is not set
-# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
-# CONFIG_SYSTEM_DATA_VERIFICATION is not set
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
-CONFIG_SYSTEM_TRUSTED_KEYS=""
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_T5403 is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_TASKS_RCU is not set
-# CONFIG_TASK_XACCT is not set
-# CONFIG_TC35815 is not set
-# CONFIG_TCG_ATMEL is not set
-# CONFIG_TCG_CRB is not set
-# CONFIG_TCG_FTPM_TEE is not set
-# CONFIG_TCG_INFINEON is not set
-# CONFIG_TCG_NSC is not set
-# CONFIG_TCG_ST33_I2C is not set
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_TIS_I2C is not set
-# CONFIG_TCG_TIS_I2C_ATMEL is not set
-# CONFIG_TCG_TIS_I2C_CR50 is not set
-# CONFIG_TCG_TIS_I2C_INFINEON is not set
-# CONFIG_TCG_TIS_I2C_NUVOTON is not set
-# CONFIG_TCG_TIS_SPI is not set
-# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
-# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCG_VTPM_PROXY is not set
-# CONFIG_TCG_XEN is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BBR is not set
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CDG is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TCP_CONG_DCTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_NV is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_WESTWOOD is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_TCS3414 is not set
-# CONFIG_TCS3472 is not set
-# CONFIG_TEE is not set
-# CONFIG_TEGRA210_ADMA is not set
-# CONFIG_TEGRA_ACONNECT is not set
-# CONFIG_TEGRA_AHB is not set
-# CONFIG_TEGRA_HOST1X is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TERANETICS_PHY is not set
-# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
-# CONFIG_TEST_BITFIELD is not set
-# CONFIG_TEST_BITMAP is not set
-# CONFIG_TEST_BITOPS is not set
-# CONFIG_TEST_BLACKHOLE_DEV is not set
-# CONFIG_TEST_BPF is not set
-# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
-# CONFIG_TEST_DEBUG_VIRTUAL is not set
-# CONFIG_TEST_DIV64 is not set
-# CONFIG_TEST_DYNAMIC_DEBUG is not set
-# CONFIG_TEST_FIRMWARE is not set
-# CONFIG_TEST_FREE_PAGES is not set
-# CONFIG_TEST_HASH is not set
-# CONFIG_TEST_HEXDUMP is not set
-# CONFIG_TEST_IDA is not set
-# CONFIG_TEST_KASAN_MODULE is not set
-# CONFIG_TEST_KMOD is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_LKM is not set
-# CONFIG_TEST_LOCKUP is not set
-# CONFIG_TEST_MAPLE_TREE is not set
-# CONFIG_TEST_MEMCAT_P is not set
-# CONFIG_TEST_MEMINIT is not set
-# CONFIG_TEST_MIN_HEAP is not set
-# CONFIG_TEST_OVERFLOW is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_TEST_PRINTF is not set
-# CONFIG_TEST_REF_TRACKER is not set
-# CONFIG_TEST_RHASHTABLE is not set
-# CONFIG_TEST_SCANF is not set
-# CONFIG_TEST_SIPHASH is not set
-# CONFIG_TEST_SORT is not set
-# CONFIG_TEST_STACKINIT is not set
-# CONFIG_TEST_STATIC_KEYS is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_STRSCPY is not set
-# CONFIG_TEST_SYSCTL is not set
-# CONFIG_TEST_UBSAN is not set
-# CONFIG_TEST_UDELAY is not set
-# CONFIG_TEST_USER_COPY is not set
-# CONFIG_TEST_UUID is not set
-# CONFIG_TEST_VMALLOC is not set
-# CONFIG_TEST_XARRAY is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_EMULATION is not set
-# CONFIG_THERMAL_GOV_BANG_BANG is not set
-# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THERMAL_MMIO is not set
-# CONFIG_THERMAL_NETLINK is not set
-# CONFIG_THERMAL_STATISTICS is not set
-# CONFIG_THERMAL_WRITABLE_TRIPS is not set
-# CONFIG_THINKPAD_ACPI is not set
-CONFIG_THIN_ARCHIVES=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_THUMB2_KERNEL is not set
-# CONFIG_THUNDERBOLT is not set
-# CONFIG_THUNDER_NIC_BGX is not set
-# CONFIG_THUNDER_NIC_PF is not set
-# CONFIG_THUNDER_NIC_RGX is not set
-# CONFIG_THUNDER_NIC_VF is not set
-# CONFIG_TICK_CPU_ACCOUNTING is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_TIMB_DMA is not set
-CONFIG_TIMERFD=y
-# CONFIG_TIMERLAT_TRACER is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_TIME_NS is not set
-# CONFIG_TINYDRM_HX8357D is not set
-# CONFIG_TINYDRM_ILI9163 is not set
-# CONFIG_TINYDRM_ILI9225 is not set
-# CONFIG_TINYDRM_ILI9341 is not set
-# CONFIG_TINYDRM_ILI9486 is not set
-# CONFIG_TINYDRM_MI0283QT is not set
-# CONFIG_TINYDRM_REPAPER is not set
-# CONFIG_TINYDRM_ST7586 is not set
-# CONFIG_TINYDRM_ST7735R is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TIPC is not set
-# CONFIG_TI_ADC081C is not set
-# CONFIG_TI_ADC0832 is not set
-# CONFIG_TI_ADC084S021 is not set
-# CONFIG_TI_ADC108S102 is not set
-# CONFIG_TI_ADC12138 is not set
-# CONFIG_TI_ADC128S052 is not set
-# CONFIG_TI_ADC161S626 is not set
-# CONFIG_TI_ADS1015 is not set
-# CONFIG_TI_ADS124S08 is not set
-# CONFIG_TI_ADS131E08 is not set
-# CONFIG_TI_ADS7950 is not set
-# CONFIG_TI_ADS8344 is not set
-# CONFIG_TI_ADS8688 is not set
-# CONFIG_TI_AM335X_ADC is not set
-# CONFIG_TI_CPSW is not set
-# CONFIG_TI_CPSW_ALE is not set
-# CONFIG_TI_CPSW_PHY_SEL is not set
-# CONFIG_TI_CPTS is not set
-# CONFIG_TI_DAC082S085 is not set
-# CONFIG_TI_DAC5571 is not set
-# CONFIG_TI_DAC7311 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_TI_DAC7612 is not set
-# CONFIG_TI_DAVINCI_CPDMA is not set
-# CONFIG_TI_DAVINCI_MDIO is not set
-# CONFIG_TI_ST is not set
-# CONFIG_TI_SYSCON_RESET is not set
-# CONFIG_TI_TLC4541 is not set
-# CONFIG_TI_TSC2046 is not set
-# CONFIG_TLAN is not set
-# CONFIG_TLS is not set
-# CONFIG_TLS_DEVICE is not set
-# CONFIG_TLS_TOE is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TMP006 is not set
-# CONFIG_TMP007 is not set
-# CONFIG_TMP117 is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_INODE64 is not set
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TORTURE_TEST is not set
-# CONFIG_TOSHIBA_HAPS is not set
-# CONFIG_TOUCHSCREEN_88PM860X is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_BU21029 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
-# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_DA9052 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
-# CONFIG_TOUCHSCREEN_EKTF2127 is not set
-# CONFIG_TOUCHSCREEN_ELAN is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_EXC3000 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GOODIX is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_HIDEEP is not set
-# CONFIG_TOUCHSCREEN_HP600 is not set
-# CONFIG_TOUCHSCREEN_HP7XX is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_ILITEK is not set
-# CONFIG_TOUCHSCREEN_IMAGIS is not set
-# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_IPAQ_MICRO is not set
-# CONFIG_TOUCHSCREEN_IPROC is not set
-# CONFIG_TOUCHSCREEN_IQS5XX is not set
-# CONFIG_TOUCHSCREEN_LPC32XX is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MC13783 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
-# CONFIG_TOUCHSCREEN_MIGOR is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_MMS114 is not set
-# CONFIG_TOUCHSCREEN_MSG2638 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MX25 is not set
-# CONFIG_TOUCHSCREEN_MXS_LRADC is not set
-# CONFIG_TOUCHSCREEN_PCAP is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_PROPERTIES is not set
-# CONFIG_TOUCHSCREEN_RASPBERRYPI_FW is not set
-# CONFIG_TOUCHSCREEN_RM_TS is not set
-# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
-# CONFIG_TOUCHSCREEN_RPI_FT5406 is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_S6SY761 is not set
-# CONFIG_TOUCHSCREEN_SILEAD is not set
-# CONFIG_TOUCHSCREEN_SIS_I2C is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_STMFTS is not set
-# CONFIG_TOUCHSCREEN_STMPE is not set
-# CONFIG_TOUCHSCREEN_SUN4I is not set
-# CONFIG_TOUCHSCREEN_SUR40 is not set
-# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
-# CONFIG_TOUCHSCREEN_SX8654 is not set
-# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-# CONFIG_TOUCHSCREEN_TS4800 is not set
-# CONFIG_TOUCHSCREEN_TSC2004 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
-# CONFIG_TOUCHSCREEN_TSC200X_CORE is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_3M is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
-# CONFIG_TOUCHSCREEN_USB_E2I is not set
-# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
-# CONFIG_TOUCHSCREEN_USB_ELO is not set
-# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
-# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
-# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
-# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
-# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
-# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_ITM is not set
-# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
-# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
-# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
-# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
-# CONFIG_TOUCHSCREEN_WM831X is not set
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9712 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE is not set
-# CONFIG_TOUCHSCREEN_ZET6223 is not set
-# CONFIG_TOUCHSCREEN_ZFORCE is not set
-# CONFIG_TOUCHSCREEN_ZINITIX is not set
-# CONFIG_TPL0102 is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TRACEPOINT_BENCHMARK is not set
-# CONFIG_TRACER_SNAPSHOT is not set
-# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_TRACE_EVAL_MAP_FILE is not set
-# CONFIG_TRACE_EVENT_INJECT is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_TRACE_MMIO_ACCESS is not set
-# CONFIG_TRACE_SINK is not set
-# CONFIG_TRACING_EVENTS_GPIO is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TRIM_UNUSED_KSYMS is not set
-# CONFIG_TRUSTED_FOUNDATIONS is not set
-# CONFIG_TRUSTED_KEYS is not set
-# CONFIG_TRUSTED_KEYS_CAAM is not set
-# CONFIG_TRUSTED_KEYS_TEE is not set
-# CONFIG_TRUSTED_KEYS_TPM is not set
-# CONFIG_TSL2583 is not set
-# CONFIG_TSL2591 is not set
-# CONFIG_TSL2772 is not set
-# CONFIG_TSL2x7x is not set
-# CONFIG_TSL4531 is not set
-# CONFIG_TSNEP is not set
-# CONFIG_TSYS01 is not set
-# CONFIG_TSYS02D is not set
-# CONFIG_TTPCI_EEPROM is not set
-CONFIG_TTY=y
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_TUN is not set
-# CONFIG_TUN_VNET_CROSS_LE is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL6030_GPADC is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_TXGBE is not set
-# CONFIG_TYPEC is not set
-# CONFIG_TYPEC_DP_ALTMODE is not set
-# CONFIG_TYPEC_TCPM is not set
-# CONFIG_TYPEC_UCSI is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_UBIFS_ATIME_SUPPORT is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-# CONFIG_UBIFS_FS_AUTHENTICATION is not set
-# CONFIG_UBIFS_FS_ENCRYPTION is not set
-CONFIG_UBIFS_FS_LZO=y
-# CONFIG_UBIFS_FS_SECURITY is not set
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UBIFS_FS_ZSTD=y
-# CONFIG_UBSAN is not set
-CONFIG_UBSAN_ALIGNMENT=y
-CONFIG_UBSAN_BOOL=y
-# CONFIG_UBSAN_DIV_ZERO is not set
-CONFIG_UBSAN_ENUM=y
-# CONFIG_UBSAN_MISC is not set
-CONFIG_UBSAN_SHIFT=y
-# CONFIG_UBSAN_UNREACHABLE is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_UCSI is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDMABUF is not set
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UHID is not set
-CONFIG_UID16=y
-# CONFIG_UIMAGE_FIT_BLK is not set
-# CONFIG_UIO is not set
-# CONFIG_ULTRA is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_UNICODE is not set
-# CONFIG_UNISYSSPAR is not set
-# CONFIG_UNISYS_VISORBUS is not set
-CONFIG_UNIX=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_UNIX_DIAG is not set
-CONFIG_UNIX_SCM=y
-# CONFIG_UNUSED_BOARD_FILES is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_UNWINDER_FRAME_POINTER is not set
-# CONFIG_UPROBES is not set
-# CONFIG_UPROBE_EVENTS is not set
-# CONFIG_US5182D is not set
-# CONFIG_USB is not set
-# CONFIG_USB4 is not set
-# CONFIG_USBIP_CORE is not set
-CONFIG_USBIP_VHCI_HC_PORTS=8
-CONFIG_USBIP_VHCI_NR_HCS=1
-# CONFIG_USBIP_VUDC is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AIRSPY is not set
-CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AMD5536UDC is not set
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_AUTOSUSPEND_DELAY=2
-# CONFIG_USB_BDC_UDC is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_CDNS3 is not set
-# CONFIG_USB_CDNS3_IMX is not set
-# CONFIG_USB_CDNS3_PCI_WRAP is not set
-# CONFIG_USB_CDNSP_PCI is not set
-# CONFIG_USB_CDNS_SUPPORT is not set
-# CONFIG_USB_CHAOSKEY is not set
-# CONFIG_USB_CHIPIDEA is not set
-# CONFIG_USB_CHIPIDEA_GENERIC is not set
-# CONFIG_USB_CHIPIDEA_IMX is not set
-# CONFIG_USB_CHIPIDEA_MSM is not set
-# CONFIG_USB_CHIPIDEA_PCI is not set
-# CONFIG_USB_CHIPIDEA_TEGRA is not set
-# CONFIG_USB_CONFIGFS is not set
-# CONFIG_USB_CONN_GPIO is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-CONFIG_USB_DEFAULT_PERSIST=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_DWC2 is not set
-# CONFIG_USB_DWC2_DEBUG is not set
-# CONFIG_USB_DWC2_DUAL_ROLE is not set
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_PERIPHERAL is not set
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_DWC3_EXYNOS is not set
-# CONFIG_USB_DWC3_HAPS is not set
-# CONFIG_USB_DWC3_KEYSTONE is not set
-# CONFIG_USB_DWC3_OF_SIMPLE is not set
-# CONFIG_USB_DWC3_PCI is not set
-# CONFIG_USB_DWC3_QCOM is not set
-# CONFIG_USB_DWC3_ULPI is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_EHCI_ATH79 is not set
-# CONFIG_USB_EHCI_FSL is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD_AT91 is not set
-# CONFIG_USB_EHCI_HCD_OMAP is not set
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_EHCI_MSM is not set
-# CONFIG_USB_EHCI_MV is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHSET_TEST_FIXTURE is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_EZUSB_FX2 is not set
-# CONFIG_USB_FEW_INIT_RETRIES is not set
-# CONFIG_USB_FOTG210_HCD is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_FSL_USB2 is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_VBUS_DRAW=2
-# CONFIG_USB_GADGET_XILINX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GR_UDC is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_DTCS033 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STK1135 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TOUPTEK is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_G_WEBCAM is not set
-# CONFIG_USB_HACKRF is not set
-# CONFIG_USB_HCD_TEST_MODE is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HSIC_USB3503 is not set
-# CONFIG_USB_HSIC_USB4604 is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_IMX21_HCD is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1301 is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_ISP1760 is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_LAN78XX is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
-# CONFIG_USB_LED_TRIG is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LGM_PHY is not set
-# CONFIG_USB_LINK_LAYER_TEST is not set
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_MAX3420_UDC is not set
-# CONFIG_USB_MAX3421_HCD is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_MSI2500 is not set
-# CONFIG_USB_MSM_OTG is not set
-# CONFIG_USB_MTU3 is not set
-# CONFIG_USB_MUSB_GADGET is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MXS_PHY is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_NET_AQC111 is not set
-# CONFIG_USB_NET_AX88179_178A is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_CDC_MBIM is not set
-# CONFIG_USB_NET_CDC_NCM is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_CH9200 is not set
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_DRIVERS is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_SR9700 is not set
-# CONFIG_USB_NET_SR9800 is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_PCI is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_ONBOARD_HUB is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
-# CONFIG_USB_OTG_FSM is not set
-# CONFIG_USB_OTG_PRODUCTLIST is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_PCI is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHY is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_QCOM_EUD is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RAW_GADGET is not set
-# CONFIG_USB_RCAR_PHY is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_ROLES_INTEL_XHCI is not set
-# CONFIG_USB_ROLE_SWITCH is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_RTL8152 is not set
-# CONFIG_USB_RTL8153_ECM is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_F8153X is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MXUPORT is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QT2 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SIMPLE is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_UPD78F0730 is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_WISHBONE is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_XR is not set
-# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SNP_UDC_PLAT is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_USB_ULPI_BUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_VL600 is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_XEN_HCD is not set
-# CONFIG_USB_XHCI_DBGCAP is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XHCI_MVEBU is not set
-# CONFIG_USB_XHCI_PCI_RENESAS is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YUREX is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USELIB is not set
-# CONFIG_USERFAULTFD is not set
-# CONFIG_USERIO is not set
-# CONFIG_USER_DECRYPTED_DATA is not set
-# CONFIG_USE_OF is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_U_SERIAL_CONSOLE is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_V4L_PLATFORM_DRIVERS is not set
-# CONFIG_V4L_TEST_DRIVERS is not set
-# CONFIG_VALIDATE_FS_PARSER is not set
-# CONFIG_VBOXGUEST is not set
-# CONFIG_VCNL3020 is not set
-# CONFIG_VCNL4000 is not set
-# CONFIG_VCNL4035 is not set
-# CONFIG_VCPU_STALL_DETECTOR is not set
-# CONFIG_VDPA is not set
-CONFIG_VDSO=y
-# CONFIG_VEML6030 is not set
-# CONFIG_VEML6070 is not set
-# CONFIG_VETH is not set
-# CONFIG_VEXPRESS_CONFIG is not set
-# CONFIG_VF610_ADC is not set
-# CONFIG_VF610_DAC is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VFIO is not set
-# CONFIG_VFIO_FSL_MC is not set
-# CONFIG_VFIO_PLATFORM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_VGA_SWITCHEROO is not set
-# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
-CONFIG_VHOST_MENU=y
-# CONFIG_VHOST_NET is not set
-# CONFIG_VHOST_VSOCK is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_AD5398 is not set
-# CONFIG_VIDEO_AD5820 is not set
-# CONFIG_VIDEO_AD9389B is not set
-# CONFIG_VIDEO_ADP1653 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_ADV7393 is not set
-# CONFIG_VIDEO_ADV748X is not set
-# CONFIG_VIDEO_ADV7511 is not set
-# CONFIG_VIDEO_ADV7604 is not set
-# CONFIG_VIDEO_ADV7842 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_AK7375 is not set
-# CONFIG_VIDEO_AK881X is not set
-# CONFIG_VIDEO_AM437X_VPFE is not set
-# CONFIG_VIDEO_AR0521 is not set
-# CONFIG_VIDEO_ARDUCAM_64MP is not set
-# CONFIG_VIDEO_ARDUCAM_PIVARIETY is not set
-# CONFIG_VIDEO_ASPEED is not set
-# CONFIG_VIDEO_ATMEL_ISC is not set
-# CONFIG_VIDEO_ATMEL_ISI is not set
-# CONFIG_VIDEO_AU0828 is not set
-# CONFIG_VIDEO_BCM2835 is not set
-# CONFIG_VIDEO_BCM2835_UNICAM is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_BU64754 is not set
-# CONFIG_VIDEO_CADENCE is not set
-# CONFIG_VIDEO_CADENCE_CSI2RX is not set
-# CONFIG_VIDEO_CADENCE_CSI2TX is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CAMERA_SENSOR is not set
-# CONFIG_VIDEO_CCS is not set
-# CONFIG_VIDEO_COBALT is not set
-# CONFIG_VIDEO_CODA is not set
-# CONFIG_VIDEO_CODEC_BCM2835 is not set
-# CONFIG_VIDEO_CS3308 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25821 is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DT3155 is not set
-# CONFIG_VIDEO_DW9714 is not set
-# CONFIG_VIDEO_DW9768 is not set
-# CONFIG_VIDEO_DW9807_VCM is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_ET8EK8 is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_GO7007 is not set
-# CONFIG_VIDEO_GS1662 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HI556 is not set
-# CONFIG_VIDEO_HI846 is not set
-# CONFIG_VIDEO_HI847 is not set
-# CONFIG_VIDEO_I2C is not set
-# CONFIG_VIDEO_IMX208 is not set
-# CONFIG_VIDEO_IMX214 is not set
-# CONFIG_VIDEO_IMX219 is not set
-# CONFIG_VIDEO_IMX258 is not set
-# CONFIG_VIDEO_IMX274 is not set
-# CONFIG_VIDEO_IMX290 is not set
-# CONFIG_VIDEO_IMX296 is not set
-# CONFIG_VIDEO_IMX319 is not set
-# CONFIG_VIDEO_IMX334 is not set
-# CONFIG_VIDEO_IMX335 is not set
-# CONFIG_VIDEO_IMX355 is not set
-# CONFIG_VIDEO_IMX412 is not set
-# CONFIG_VIDEO_IMX477 is not set
-# CONFIG_VIDEO_IMX519 is not set
-# CONFIG_VIDEO_IMX708 is not set
-# CONFIG_VIDEO_IMX8_JPEG is not set
-# CONFIG_VIDEO_IMX_MIPI_CSIS is not set
-# CONFIG_VIDEO_IMX_PXP is not set
-# CONFIG_VIDEO_IRS1125 is not set
-# CONFIG_VIDEO_IR_I2C is not set
-# CONFIG_VIDEO_ISL7998X is not set
-# CONFIG_VIDEO_ISP_BCM2835 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_LM3560 is not set
-# CONFIG_VIDEO_LM3646 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_M5MOLS is not set
-# CONFIG_VIDEO_MAX9286 is not set
-# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set
-# CONFIG_VIDEO_ML86V7667 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MT9M001 is not set
-# CONFIG_VIDEO_MT9M032 is not set
-# CONFIG_VIDEO_MT9M111 is not set
-# CONFIG_VIDEO_MT9P031 is not set
-# CONFIG_VIDEO_MT9T001 is not set
-# CONFIG_VIDEO_MT9T112 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_MT9V032 is not set
-# CONFIG_VIDEO_MT9V111 is not set
-# CONFIG_VIDEO_MUX is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_NOON010PC30 is not set
-# CONFIG_VIDEO_OG01A1B is not set
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-# CONFIG_VIDEO_OV02A10 is not set
-# CONFIG_VIDEO_OV08D10 is not set
-# CONFIG_VIDEO_OV13858 is not set
-# CONFIG_VIDEO_OV13B10 is not set
-# CONFIG_VIDEO_OV2311 is not set
-# CONFIG_VIDEO_OV2640 is not set
-# CONFIG_VIDEO_OV2659 is not set
-# CONFIG_VIDEO_OV2680 is not set
-# CONFIG_VIDEO_OV2685 is not set
-# CONFIG_VIDEO_OV2740 is not set
-# CONFIG_VIDEO_OV5640 is not set
-# CONFIG_VIDEO_OV5645 is not set
-# CONFIG_VIDEO_OV5647 is not set
-# CONFIG_VIDEO_OV5648 is not set
-# CONFIG_VIDEO_OV5670 is not set
-# CONFIG_VIDEO_OV5675 is not set
-# CONFIG_VIDEO_OV5693 is not set
-# CONFIG_VIDEO_OV5695 is not set
-# CONFIG_VIDEO_OV64A40 is not set
-# CONFIG_VIDEO_OV6650 is not set
-# CONFIG_VIDEO_OV7251 is not set
-# CONFIG_VIDEO_OV7640 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_OV772X is not set
-# CONFIG_VIDEO_OV7740 is not set
-# CONFIG_VIDEO_OV8856 is not set
-# CONFIG_VIDEO_OV8865 is not set
-# CONFIG_VIDEO_OV9281 is not set
-# CONFIG_VIDEO_OV9282 is not set
-# CONFIG_VIDEO_OV9640 is not set
-# CONFIG_VIDEO_OV9650 is not set
-# CONFIG_VIDEO_OV9734 is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_RASPBERRYPI_PISP_BE is not set
-# CONFIG_VIDEO_RCAR_CSI2 is not set
-# CONFIG_VIDEO_RCAR_ISP is not set
-# CONFIG_VIDEO_RCAR_VIN is not set
-# CONFIG_VIDEO_RDACM20 is not set
-# CONFIG_VIDEO_RDACM21 is not set
-# CONFIG_VIDEO_RJ54N1 is not set
-# CONFIG_VIDEO_ROCKCHIP_ISP1 is not set
-# CONFIG_VIDEO_RP1_CFE is not set
-# CONFIG_VIDEO_S5C73M3 is not set
-# CONFIG_VIDEO_S5K4ECGX is not set
-# CONFIG_VIDEO_S5K5BAF is not set
-# CONFIG_VIDEO_S5K6A3 is not set
-# CONFIG_VIDEO_S5K6AA is not set
-# CONFIG_VIDEO_SAA6588 is not set
-# CONFIG_VIDEO_SAA6752HS is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA7164 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_SMIAPP is not set
-# CONFIG_VIDEO_SOLO6X10 is not set
-# CONFIG_VIDEO_SONY_BTF_MPX is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-# CONFIG_VIDEO_STK1160_COMMON is not set
-# CONFIG_VIDEO_ST_MIPID02 is not set
-# CONFIG_VIDEO_SUN4I_CSI is not set
-# CONFIG_VIDEO_SUN6I_CSI is not set
-# CONFIG_VIDEO_SUN8I_A83T_MIPI_CSI2 is not set
-# CONFIG_VIDEO_TC358743 is not set
-# CONFIG_VIDEO_TDA1997X is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_THS8200 is not set
-# CONFIG_VIDEO_TIMBERDALE is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TM6000 is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_TW2804 is not set
-# CONFIG_VIDEO_TW5864 is not set
-# CONFIG_VIDEO_TW68 is not set
-# CONFIG_VIDEO_TW9903 is not set
-# CONFIG_VIDEO_TW9906 is not set
-# CONFIG_VIDEO_TW9910 is not set
-# CONFIG_VIDEO_UDA1342 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBTV is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_XILINX is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_BLK_SCSI is not set
-# CONFIG_VIRTIO_CONSOLE is not set
-# CONFIG_VIRTIO_FS is not set
-# CONFIG_VIRTIO_INPUT is not set
-CONFIG_VIRTIO_MENU=y
-# CONFIG_VIRTIO_MMIO is not set
-# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
-# CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_VL53L0X_I2C is not set
-# CONFIG_VL6180 is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_VLAN_8021Q_MVRP is not set
-# CONFIG_VMAP_STACK is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_VMLINUX_MAP is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMWARE_PVSCSI is not set
-# CONFIG_VMWARE_VMCI is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VOP_BUS is not set
-# CONFIG_VORTEX is not set
-# CONFIG_VSOCKETS is not set
-# CONFIG_VSOCKETS_DIAG is not set
-# CONFIG_VT is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_VXGE is not set
-# CONFIG_VXLAN is not set
-# CONFIG_VZ89X is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_CON is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_MASTER_SGI is not set
-# CONFIG_W1_SLAVE_DS2405 is not set
-# CONFIG_W1_SLAVE_DS2406 is not set
-# CONFIG_W1_SLAVE_DS2408 is not set
-# CONFIG_W1_SLAVE_DS2413 is not set
-# CONFIG_W1_SLAVE_DS2423 is not set
-# CONFIG_W1_SLAVE_DS2430 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2438 is not set
-# CONFIG_W1_SLAVE_DS250X is not set
-# CONFIG_W1_SLAVE_DS2780 is not set
-# CONFIG_W1_SLAVE_DS2781 is not set
-# CONFIG_W1_SLAVE_DS2805 is not set
-# CONFIG_W1_SLAVE_DS28E04 is not set
-# CONFIG_W1_SLAVE_DS28E17 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WANXL is not set
-# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_CORE is not set
-CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
-# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-CONFIG_WATCHDOG_OPEN_TIMEOUT=0
-# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
-# CONFIG_WATCHDOG_SYSFS is not set
-# CONFIG_WATCH_QUEUE is not set
-# CONFIG_WD80x3 is not set
-# CONFIG_WDAT_WDT is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_WERROR is not set
-# CONFIG_WEXT_CORE is not set
-# CONFIG_WEXT_PRIV is not set
-# CONFIG_WEXT_PROC is not set
-# CONFIG_WEXT_SPY is not set
-CONFIG_WILINK_PLATFORM_DATA=y
-# CONFIG_WIMAX is not set
-# CONFIG_WIREGUARD is not set
-CONFIG_WIRELESS=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_WIRELESS_WDS is not set
-# CONFIG_WIZNET_W5100 is not set
-# CONFIG_WIZNET_W5300 is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_WL18XX is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_VENDOR_ADMTEK is not set
-# CONFIG_WLAN_VENDOR_ATH is not set
-# CONFIG_WLAN_VENDOR_ATMEL is not set
-# CONFIG_WLAN_VENDOR_BROADCOM is not set
-# CONFIG_WLAN_VENDOR_CISCO is not set
-# CONFIG_WLAN_VENDOR_INTEL is not set
-# CONFIG_WLAN_VENDOR_INTERSIL is not set
-# CONFIG_WLAN_VENDOR_MARVELL is not set
-# CONFIG_WLAN_VENDOR_MEDIATEK is not set
-# CONFIG_WLAN_VENDOR_MICROCHIP is not set
-# CONFIG_WLAN_VENDOR_PURELIFI is not set
-# CONFIG_WLAN_VENDOR_QUANTENNA is not set
-# CONFIG_WLAN_VENDOR_RALINK is not set
-# CONFIG_WLAN_VENDOR_REALTEK is not set
-# CONFIG_WLAN_VENDOR_RSI is not set
-# CONFIG_WLAN_VENDOR_SILABS is not set
-# CONFIG_WLAN_VENDOR_ST is not set
-# CONFIG_WLAN_VENDOR_TI is not set
-# CONFIG_WLAN_VENDOR_ZYDAS is not set
-# CONFIG_WLCORE is not set
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-# CONFIG_WQ_WATCHDOG is not set
-# CONFIG_WWAN is not set
-# CONFIG_WWAN_HWSIM is not set
-# CONFIG_WW_MUTEX_SELFTEST is not set
-# CONFIG_X25 is not set
-# CONFIG_X509_CERTIFICATE_PARSER is not set
-# CONFIG_X86_PKG_TEMP_THERMAL is not set
-CONFIG_X86_SYSFB=y
-# CONFIG_XDP_SOCKETS is not set
-# CONFIG_XEN is not set
-# CONFIG_XEN_GRANT_DMA_ALLOC is not set
-# CONFIG_XEN_PVCALLS_FRONTEND is not set
-CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_INTERFACE is not set
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_ONLINE_SCRUB is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_SUPPORT_V4 is not set
-# CONFIG_XFS_WARN is not set
-# CONFIG_XILINX_AXI_EMAC is not set
-# CONFIG_XILINX_DMA is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_XILINX_GMII2RGMII is not set
-# CONFIG_XILINX_INTC is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_SDFEC is not set
-# CONFIG_XILINX_VCU is not set
-# CONFIG_XILINX_WATCHDOG is not set
-# CONFIG_XILINX_XADC is not set
-# CONFIG_XILINX_ZYNQMP_DMA is not set
-# CONFIG_XILINX_ZYNQMP_DPDMA is not set
-# CONFIG_XILLYBUS is not set
-# CONFIG_XILLYUSB is not set
-# CONFIG_XIL_AXIS_FIFO is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_XMON is not set
-CONFIG_XZ_DEC=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
-# CONFIG_XZ_DEC_BCJ is not set
-# CONFIG_XZ_DEC_IA64 is not set
-# CONFIG_XZ_DEC_MICROLZMA is not set
-# CONFIG_XZ_DEC_POWERPC is not set
-# CONFIG_XZ_DEC_SPARC is not set
-# CONFIG_XZ_DEC_TEST is not set
-# CONFIG_XZ_DEC_X86 is not set
-# CONFIG_YAM is not set
-# CONFIG_YAMAHA_YAS530 is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZBUD is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_ZERO_CALL_USED_REGS is not set
-# CONFIG_ZIIRAVE_WATCHDOG is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_ZLIB_DEFLATE is not set
-# CONFIG_ZLIB_INFLATE is not set
-CONFIG_ZONE_DMA=y
-# CONFIG_ZOPT2201 is not set
-# CONFIG_ZPA2326 is not set
-# CONFIG_ZPOOL is not set
-# CONFIG_ZRAM is not set
-# CONFIG_ZRAM_DEF_COMP_842 is not set
-# CONFIG_ZRAM_DEF_COMP_LZ4 is not set
-# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
-# CONFIG_ZRAM_DEF_COMP_LZO is not set
-# CONFIG_ZRAM_DEF_COMP_LZORLE is not set
-# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
-# CONFIG_ZRAM_MEMORY_TRACKING is not set
-# CONFIG_ZSMALLOC is not set
-# CONFIG_ZSWAP is not set
-# CONFIG_ZX_TDM is not set
diff --git a/target/linux/generic/hack-6.1/204-module_strip.patch b/target/linux/generic/hack-6.1/204-module_strip.patch
deleted file mode 100644
index 9fefd0bd6eff..000000000000
--- a/target/linux/generic/hack-6.1/204-module_strip.patch
+++ /dev/null
@@ -1,210 +0,0 @@
-From a779a482fb9b9f8fcdf8b2519c789b4b9bb5dd05 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 16:56:48 +0200
-Subject: build: add a hack for removing non-essential module info
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/module.h      | 13 ++++++++-----
- include/linux/moduleparam.h | 15 ++++++++++++---
- init/Kconfig                |  7 +++++++
- kernel/module.c             |  5 ++++-
- scripts/mod/modpost.c       | 12 ++++++++++++
- 5 files changed, 43 insertions(+), 9 deletions(-)
-
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -163,6 +163,7 @@ extern void cleanup_module(void);
- 
- /* Generic info of form tag = "info" */
- #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
-+#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info)
- 
- /* For userspace: you can also call me... */
- #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
-@@ -232,12 +233,12 @@ extern void cleanup_module(void);
-  * Author(s), use "Name <email>" or just "Name", for multiple
-  * authors use multiple MODULE_AUTHOR() statements/lines.
-  */
--#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
-+#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author)
- 
- /* What your module does. */
--#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
-+#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description)
- 
--#ifdef MODULE
-+#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED)
- /* Creates an alias so file2alias.c can find device table. */
- #define MODULE_DEVICE_TABLE(type, name)					\
- extern typeof(name) __mod_##type##__##name##_device_table		\
-@@ -264,7 +265,9 @@ extern typeof(name) __mod_##type##__##na
-  */
- 
- #if defined(MODULE) || !defined(CONFIG_SYSFS)
--#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
-+#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version)
-+#elif defined(CONFIG_MODULE_STRIPPED)
-+#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version)
- #else
- #define MODULE_VERSION(_version)					\
- 	MODULE_INFO(version, _version);					\
-@@ -287,7 +290,7 @@ extern typeof(name) __mod_##type##__##na
- /* Optional firmware file (or files) needed by the module
-  * format is simply firmware file name.  Multiple firmware
-  * files require multiple MODULE_FIRMWARE() specifiers */
--#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
-+#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware)
- 
- #define MODULE_IMPORT_NS(ns)	MODULE_INFO(import_ns, __stringify(ns))
- 
---- a/include/linux/moduleparam.h
-+++ b/include/linux/moduleparam.h
-@@ -20,6 +20,16 @@
- /* Chosen so that structs with an unsigned long line up. */
- #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
- 
-+/* This struct is here for syntactic coherency, it is not used */
-+#define __MODULE_INFO_DISABLED(name)					  \
-+  struct __UNIQUE_ID(name) {}
-+
-+#ifdef CONFIG_MODULE_STRIPPED
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name)
-+#else
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info)
-+#endif
-+
- #define __MODULE_INFO(tag, name, info)					  \
- 	static const char __UNIQUE_ID(name)[]				  \
- 		__used __section(".modinfo") __aligned(1)		  \
-@@ -31,7 +41,7 @@
- /* One for each parameter, describing how to use it.  Some files do
-    multiple of these per line, so can't just use MODULE_INFO. */
- #define MODULE_PARM_DESC(_parm, desc) \
--	__MODULE_INFO(parm, _parm, #_parm ":" desc)
-+	__MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc)
- 
- struct kernel_param;
- 
---- a/kernel/module/Kconfig
-+++ b/kernel/module/Kconfig
-@@ -290,4 +290,11 @@ config MODULES_TREE_LOOKUP
- 	def_bool y
- 	depends on PERF_EVENTS || TRACING || CFI_CLANG
- 
-+config MODULE_STRIPPED
-+	bool "Reduce module size"
-+	depends on MODULES
-+	help
-+	  Remove module parameter descriptions, author info, version, aliases,
-+	  device tables, etc.
-+
- endif # MODULES
---- a/kernel/module/main.c
-+++ b/kernel/module/main.c
-@@ -988,6 +988,7 @@ size_t modinfo_attrs_count = ARRAY_SIZE(
- 
- static const char vermagic[] = VERMAGIC_STRING;
- 
-+#if defined(CONFIG_MODVERSIONS) || !defined(CONFIG_MODULE_STRIPPED)
- int try_to_force_load(struct module *mod, const char *reason)
- {
- #ifdef CONFIG_MODULE_FORCE_LOAD
-@@ -999,6 +1000,7 @@ int try_to_force_load(struct module *mod
- 	return -ENOEXEC;
- #endif
- }
-+#endif
- 
- static char *get_modinfo(const struct load_info *info, const char *tag);
- static char *get_next_modinfo(const struct load_info *info, const char *tag,
-@@ -1958,9 +1960,11 @@ static int setup_load_info(struct load_i
- 
- static int check_modinfo(struct module *mod, struct load_info *info, int flags)
- {
--	const char *modmagic = get_modinfo(info, "vermagic");
- 	int err;
- 
-+#ifndef CONFIG_MODULE_STRIPPED
-+	const char *modmagic = get_modinfo(info, "vermagic");
-+
- 	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
- 		modmagic = NULL;
- 
-@@ -1981,6 +1985,7 @@ static int check_modinfo(struct module *
- 				mod->name);
- 		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
- 	}
-+#endif
- 
- 	check_modinfo_retpoline(mod, info);
- 
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -1785,7 +1785,9 @@ static void read_symbols(const char *mod
- 		symname = remove_dot(info.strtab + sym->st_name);
- 
- 		handle_symbol(mod, &info, sym, symname);
-+#ifndef CONFIG_MODULE_STRIPPED
- 		handle_moddevtable(mod, &info, sym, symname);
-+#endif
- 	}
- 
- 	for (sym = info.symtab_start; sym < info.symtab_stop; sym++) {
-@@ -1948,8 +1950,10 @@ static void add_header(struct buffer *b,
- 	buf_printf(b, "BUILD_SALT;\n");
- 	buf_printf(b, "BUILD_LTO_INFO;\n");
- 	buf_printf(b, "\n");
-+#ifndef CONFIG_MODULE_STRIPPED
- 	buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
- 	buf_printf(b, "MODULE_INFO(name, KBUILD_MODNAME);\n");
-+#endif
- 	buf_printf(b, "\n");
- 	buf_printf(b, "__visible struct module __this_module\n");
- 	buf_printf(b, "__section(\".gnu.linkonce.this_module\") = {\n");
-@@ -1963,8 +1967,10 @@ static void add_header(struct buffer *b,
- 	buf_printf(b, "\t.arch = MODULE_ARCH_INIT,\n");
- 	buf_printf(b, "};\n");
- 
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (!external_module)
- 		buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
-+#endif
- 
- 	buf_printf(b,
- 		   "\n"
-@@ -1972,8 +1978,10 @@ static void add_header(struct buffer *b,
- 		   "MODULE_INFO(retpoline, \"Y\");\n"
- 		   "#endif\n");
- 
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (strstarts(mod->name, "drivers/staging"))
- 		buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
-+#endif
- 
- 	if (strstarts(mod->name, "tools/testing"))
- 		buf_printf(b, "\nMODULE_INFO(test, \"Y\");\n");
-@@ -2069,11 +2077,13 @@ static void add_depends(struct buffer *b
- 
- static void add_srcversion(struct buffer *b, struct module *mod)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- 	if (mod->srcversion[0]) {
- 		buf_printf(b, "\n");
- 		buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n",
- 			   mod->srcversion);
- 	}
-+#endif
- }
- 
- static void write_buf(struct buffer *b, const char *fname)
-@@ -2159,7 +2169,9 @@ static void write_mod_c_file(struct modu
- 	add_exported_symbols(&buf, mod);
- 	add_versions(&buf, mod);
- 	add_depends(&buf, mod);
-+#ifndef CONFIG_MODULE_STRIPPED
- 	add_moddevtable(&buf, mod);
-+#endif
- 	add_srcversion(&buf, mod);
- 
- 	ret = snprintf(fname, sizeof(fname), "%s.mod.c", mod->name);
diff --git a/target/linux/generic/hack-6.1/205-kconfig-abort-configuration-on-unset-symbol.patch b/target/linux/generic/hack-6.1/205-kconfig-abort-configuration-on-unset-symbol.patch
deleted file mode 100644
index df18507041f7..000000000000
--- a/target/linux/generic/hack-6.1/205-kconfig-abort-configuration-on-unset-symbol.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 310e8e04a05d9eb43fa9dd7f00143300afcaa37a Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 11 Nov 2022 13:33:44 +0100
-Subject: [PATCH] kconfig: abort configuration on unset symbol
-
-When a target configuration has unset Kconfig symbols, the build will
-fail when OpenWrt is compiled with V=s and stdin is connected to a tty.
-
-In case OpenWrt is compiled without either of these preconditions, the
-build will succeed with the symbols in question being unset.
-
-Modify the kernel configuration in a way it fails on unset symbols
-regardless of the aforementioned preconditions.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- scripts/kconfig/conf.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/scripts/kconfig/conf.c
-+++ b/scripts/kconfig/conf.c
-@@ -338,6 +338,9 @@ static int conf_askvalue(struct symbol *
- 		}
- 		/* fall through */
- 	default:
-+		if (!tty_stdio && getenv("FAIL_ON_UNCONFIGURED")) {
-+			exit(1);
-+		}
- 		fflush(stdout);
- 		xfgets(line, sizeof(line), stdin);
- 		break;
-@@ -520,6 +523,9 @@ static int conf_choice(struct menu *menu
- 			}
- 			/* fall through */
- 		case oldaskconfig:
-+			if (!tty_stdio && getenv("FAIL_ON_UNCONFIGURED")) {
-+				exit(1);
-+			}
- 			fflush(stdout);
- 			xfgets(line, sizeof(line), stdin);
- 			strip(line);
diff --git a/target/linux/generic/hack-6.1/210-darwin_scripts_include.patch b/target/linux/generic/hack-6.1/210-darwin_scripts_include.patch
deleted file mode 100644
index c9612536dec6..000000000000
--- a/target/linux/generic/hack-6.1/210-darwin_scripts_include.patch
+++ /dev/null
@@ -1,3053 +0,0 @@
-From db7c30dcd9a0391bf13b62c9f91e144d762ef43a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 7 Jul 2017 17:00:49 +0200
-Subject: Add an OSX specific patch to make the kernel be compiled
-
-lede-commit: 3fc2a24f0422b2f55f9ed43f116db3111f700526
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- scripts/kconfig/Makefile   |    3 +
- scripts/mod/elf.h          | 3007 ++++++++++++++++++++++++++++++++++++++++++++
- scripts/mod/mk_elfconfig.c |    4 +
- scripts/mod/modpost.h      |    4 +
- 4 files changed, 3018 insertions(+)
- create mode 100644 scripts/mod/elf.h
-
---- /dev/null
-+++ b/scripts/mod/elf.h
-@@ -0,0 +1,3007 @@
-+/* This file defines standard ELF types, structures, and macros.
-+   Copyright (C) 1995-2012 Free Software Foundation, Inc.
-+   This file is part of the GNU C Library.
-+
-+   The GNU C Library is free software; you can redistribute it and/or
-+   modify it under the terms of the GNU Lesser General Public
-+   License as published by the Free Software Foundation; either
-+   version 2.1 of the License, or (at your option) any later version.
-+
-+   The GNU C Library is distributed in the hope that it will be useful,
-+   but WITHOUT ANY WARRANTY; without even the implied warranty of
-+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-+   Lesser General Public License for more details.
-+
-+   You should have received a copy of the GNU Lesser General Public
-+   License along with the GNU C Library; if not, see
-+   <http://www.gnu.org/licenses/>.  */
-+
-+#ifndef _ELF_H
-+#define	_ELF_H 1
-+
-+/* Standard ELF types.  */
-+
-+#include <stdint.h>
-+
-+/* Type for a 16-bit quantity.  */
-+typedef uint16_t Elf32_Half;
-+typedef uint16_t Elf64_Half;
-+
-+/* Types for signed and unsigned 32-bit quantities.  */
-+typedef uint32_t Elf32_Word;
-+typedef	int32_t  Elf32_Sword;
-+typedef uint32_t Elf64_Word;
-+typedef	int32_t  Elf64_Sword;
-+
-+/* Types for signed and unsigned 64-bit quantities.  */
-+typedef uint64_t Elf32_Xword;
-+typedef	int64_t  Elf32_Sxword;
-+typedef uint64_t Elf64_Xword;
-+typedef	int64_t  Elf64_Sxword;
-+
-+/* Type of addresses.  */
-+typedef uint32_t Elf32_Addr;
-+typedef uint64_t Elf64_Addr;
-+
-+/* Type of file offsets.  */
-+typedef uint32_t Elf32_Off;
-+typedef uint64_t Elf64_Off;
-+
-+/* Type for section indices, which are 16-bit quantities.  */
-+typedef uint16_t Elf32_Section;
-+typedef uint16_t Elf64_Section;
-+
-+/* Type for version symbol information.  */
-+typedef Elf32_Half Elf32_Versym;
-+typedef Elf64_Half Elf64_Versym;
-+
-+
-+/* The ELF file header.  This appears at the start of every ELF file.  */
-+
-+#define EI_NIDENT (16)
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf32_Half	e_type;			/* Object file type */
-+  Elf32_Half	e_machine;		/* Architecture */
-+  Elf32_Word	e_version;		/* Object file version */
-+  Elf32_Addr	e_entry;		/* Entry point virtual address */
-+  Elf32_Off	e_phoff;		/* Program header table file offset */
-+  Elf32_Off	e_shoff;		/* Section header table file offset */
-+  Elf32_Word	e_flags;		/* Processor-specific flags */
-+  Elf32_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf32_Half	e_phentsize;		/* Program header table entry size */
-+  Elf32_Half	e_phnum;		/* Program header table entry count */
-+  Elf32_Half	e_shentsize;		/* Section header table entry size */
-+  Elf32_Half	e_shnum;		/* Section header table entry count */
-+  Elf32_Half	e_shstrndx;		/* Section header string table index */
-+} Elf32_Ehdr;
-+
-+typedef struct
-+{
-+  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
-+  Elf64_Half	e_type;			/* Object file type */
-+  Elf64_Half	e_machine;		/* Architecture */
-+  Elf64_Word	e_version;		/* Object file version */
-+  Elf64_Addr	e_entry;		/* Entry point virtual address */
-+  Elf64_Off	e_phoff;		/* Program header table file offset */
-+  Elf64_Off	e_shoff;		/* Section header table file offset */
-+  Elf64_Word	e_flags;		/* Processor-specific flags */
-+  Elf64_Half	e_ehsize;		/* ELF header size in bytes */
-+  Elf64_Half	e_phentsize;		/* Program header table entry size */
-+  Elf64_Half	e_phnum;		/* Program header table entry count */
-+  Elf64_Half	e_shentsize;		/* Section header table entry size */
-+  Elf64_Half	e_shnum;		/* Section header table entry count */
-+  Elf64_Half	e_shstrndx;		/* Section header string table index */
-+} Elf64_Ehdr;
-+
-+/* Fields in the e_ident array.  The EI_* macros are indices into the
-+   array.  The macros under each EI_* macro are the values the byte
-+   may have.  */
-+
-+#define EI_MAG0		0		/* File identification byte 0 index */
-+#define ELFMAG0		0x7f		/* Magic number byte 0 */
-+
-+#define EI_MAG1		1		/* File identification byte 1 index */
-+#define ELFMAG1		'E'		/* Magic number byte 1 */
-+
-+#define EI_MAG2		2		/* File identification byte 2 index */
-+#define ELFMAG2		'L'		/* Magic number byte 2 */
-+
-+#define EI_MAG3		3		/* File identification byte 3 index */
-+#define ELFMAG3		'F'		/* Magic number byte 3 */
-+
-+/* Conglomeration of the identification bytes, for easy testing as a word.  */
-+#define	ELFMAG		"\177ELF"
-+#define	SELFMAG		4
-+
-+#define EI_CLASS	4		/* File class byte index */
-+#define ELFCLASSNONE	0		/* Invalid class */
-+#define ELFCLASS32	1		/* 32-bit objects */
-+#define ELFCLASS64	2		/* 64-bit objects */
-+#define ELFCLASSNUM	3
-+
-+#define EI_DATA		5		/* Data encoding byte index */
-+#define ELFDATANONE	0		/* Invalid data encoding */
-+#define ELFDATA2LSB	1		/* 2's complement, little endian */
-+#define ELFDATA2MSB	2		/* 2's complement, big endian */
-+#define ELFDATANUM	3
-+
-+#define EI_VERSION	6		/* File version byte index */
-+					/* Value must be EV_CURRENT */
-+
-+#define EI_OSABI	7		/* OS ABI identification */
-+#define ELFOSABI_NONE		0	/* UNIX System V ABI */
-+#define ELFOSABI_SYSV		0	/* Alias.  */
-+#define ELFOSABI_HPUX		1	/* HP-UX */
-+#define ELFOSABI_NETBSD		2	/* NetBSD.  */
-+#define ELFOSABI_GNU		3	/* Object uses GNU ELF extensions.  */
-+#define ELFOSABI_LINUX		ELFOSABI_GNU /* Compatibility alias.  */
-+#define ELFOSABI_SOLARIS	6	/* Sun Solaris.  */
-+#define ELFOSABI_AIX		7	/* IBM AIX.  */
-+#define ELFOSABI_IRIX		8	/* SGI Irix.  */
-+#define ELFOSABI_FREEBSD	9	/* FreeBSD.  */
-+#define ELFOSABI_TRU64		10	/* Compaq TRU64 UNIX.  */
-+#define ELFOSABI_MODESTO	11	/* Novell Modesto.  */
-+#define ELFOSABI_OPENBSD	12	/* OpenBSD.  */
-+#define ELFOSABI_ARM_AEABI	64	/* ARM EABI */
-+#define ELFOSABI_ARM		97	/* ARM */
-+#define ELFOSABI_STANDALONE	255	/* Standalone (embedded) application */
-+
-+#define EI_ABIVERSION	8		/* ABI version */
-+
-+#define EI_PAD		9		/* Byte index of padding bytes */
-+
-+/* Legal values for e_type (object file type).  */
-+
-+#define ET_NONE		0		/* No file type */
-+#define ET_REL		1		/* Relocatable file */
-+#define ET_EXEC		2		/* Executable file */
-+#define ET_DYN		3		/* Shared object file */
-+#define ET_CORE		4		/* Core file */
-+#define	ET_NUM		5		/* Number of defined types */
-+#define ET_LOOS		0xfe00		/* OS-specific range start */
-+#define ET_HIOS		0xfeff		/* OS-specific range end */
-+#define ET_LOPROC	0xff00		/* Processor-specific range start */
-+#define ET_HIPROC	0xffff		/* Processor-specific range end */
-+
-+/* Legal values for e_machine (architecture).  */
-+
-+#define EM_NONE		 0		/* No machine */
-+#define EM_M32		 1		/* AT&T WE 32100 */
-+#define EM_SPARC	 2		/* SUN SPARC */
-+#define EM_386		 3		/* Intel 80386 */
-+#define EM_68K		 4		/* Motorola m68k family */
-+#define EM_88K		 5		/* Motorola m88k family */
-+#define EM_860		 7		/* Intel 80860 */
-+#define EM_MIPS		 8		/* MIPS R3000 big-endian */
-+#define EM_S370		 9		/* IBM System/370 */
-+#define EM_MIPS_RS3_LE	10		/* MIPS R3000 little-endian */
-+
-+#define EM_PARISC	15		/* HPPA */
-+#define EM_VPP500	17		/* Fujitsu VPP500 */
-+#define EM_SPARC32PLUS	18		/* Sun's "v8plus" */
-+#define EM_960		19		/* Intel 80960 */
-+#define EM_PPC		20		/* PowerPC */
-+#define EM_PPC64	21		/* PowerPC 64-bit */
-+#define EM_S390		22		/* IBM S390 */
-+
-+#define EM_V800		36		/* NEC V800 series */
-+#define EM_FR20		37		/* Fujitsu FR20 */
-+#define EM_RH32		38		/* TRW RH-32 */
-+#define EM_RCE		39		/* Motorola RCE */
-+#define EM_ARM		40		/* ARM */
-+#define EM_FAKE_ALPHA	41		/* Digital Alpha */
-+#define EM_SH		42		/* Hitachi SH */
-+#define EM_SPARCV9	43		/* SPARC v9 64-bit */
-+#define EM_TRICORE	44		/* Siemens Tricore */
-+#define EM_ARC		45		/* Argonaut RISC Core */
-+#define EM_H8_300	46		/* Hitachi H8/300 */
-+#define EM_H8_300H	47		/* Hitachi H8/300H */
-+#define EM_H8S		48		/* Hitachi H8S */
-+#define EM_H8_500	49		/* Hitachi H8/500 */
-+#define EM_IA_64	50		/* Intel Merced */
-+#define EM_MIPS_X	51		/* Stanford MIPS-X */
-+#define EM_COLDFIRE	52		/* Motorola Coldfire */
-+#define EM_68HC12	53		/* Motorola M68HC12 */
-+#define EM_MMA		54		/* Fujitsu MMA Multimedia Accelerator*/
-+#define EM_PCP		55		/* Siemens PCP */
-+#define EM_NCPU		56		/* Sony nCPU embeeded RISC */
-+#define EM_NDR1		57		/* Denso NDR1 microprocessor */
-+#define EM_STARCORE	58		/* Motorola Start*Core processor */
-+#define EM_ME16		59		/* Toyota ME16 processor */
-+#define EM_ST100	60		/* STMicroelectronic ST100 processor */
-+#define EM_TINYJ	61		/* Advanced Logic Corp. Tinyj emb.fam*/
-+#define EM_X86_64	62		/* AMD x86-64 architecture */
-+#define EM_PDSP		63		/* Sony DSP Processor */
-+
-+#define EM_FX66		66		/* Siemens FX66 microcontroller */
-+#define EM_ST9PLUS	67		/* STMicroelectronics ST9+ 8/16 mc */
-+#define EM_ST7		68		/* STmicroelectronics ST7 8 bit mc */
-+#define EM_68HC16	69		/* Motorola MC68HC16 microcontroller */
-+#define EM_68HC11	70		/* Motorola MC68HC11 microcontroller */
-+#define EM_68HC08	71		/* Motorola MC68HC08 microcontroller */
-+#define EM_68HC05	72		/* Motorola MC68HC05 microcontroller */
-+#define EM_SVX		73		/* Silicon Graphics SVx */
-+#define EM_ST19		74		/* STMicroelectronics ST19 8 bit mc */
-+#define EM_VAX		75		/* Digital VAX */
-+#define EM_CRIS		76		/* Axis Communications 32-bit embedded processor */
-+#define EM_JAVELIN	77		/* Infineon Technologies 32-bit embedded processor */
-+#define EM_FIREPATH	78		/* Element 14 64-bit DSP Processor */
-+#define EM_ZSP		79		/* LSI Logic 16-bit DSP Processor */
-+#define EM_MMIX		80		/* Donald Knuth's educational 64-bit processor */
-+#define EM_HUANY	81		/* Harvard University machine-independent object files */
-+#define EM_PRISM	82		/* SiTera Prism */
-+#define EM_AVR		83		/* Atmel AVR 8-bit microcontroller */
-+#define EM_FR30		84		/* Fujitsu FR30 */
-+#define EM_D10V		85		/* Mitsubishi D10V */
-+#define EM_D30V		86		/* Mitsubishi D30V */
-+#define EM_V850		87		/* NEC v850 */
-+#define EM_M32R		88		/* Mitsubishi M32R */
-+#define EM_MN10300	89		/* Matsushita MN10300 */
-+#define EM_MN10200	90		/* Matsushita MN10200 */
-+#define EM_PJ		91		/* picoJava */
-+#define EM_OPENRISC	92		/* OpenRISC 32-bit embedded processor */
-+#define EM_ARC_A5	93		/* ARC Cores Tangent-A5 */
-+#define EM_XTENSA	94		/* Tensilica Xtensa Architecture */
-+#define EM_TILEPRO	188		/* Tilera TILEPro */
-+#define EM_TILEGX	191		/* Tilera TILE-Gx */
-+#define EM_NUM		192
-+
-+/* If it is necessary to assign new unofficial EM_* values, please
-+   pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
-+   chances of collision with official or non-GNU unofficial values.  */
-+
-+#define EM_ALPHA	0x9026
-+
-+/* Legal values for e_version (version).  */
-+
-+#define EV_NONE		0		/* Invalid ELF version */
-+#define EV_CURRENT	1		/* Current version */
-+#define EV_NUM		2
-+
-+/* Section header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf32_Word	sh_type;		/* Section type */
-+  Elf32_Word	sh_flags;		/* Section flags */
-+  Elf32_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf32_Off	sh_offset;		/* Section file offset */
-+  Elf32_Word	sh_size;		/* Section size in bytes */
-+  Elf32_Word	sh_link;		/* Link to another section */
-+  Elf32_Word	sh_info;		/* Additional section information */
-+  Elf32_Word	sh_addralign;		/* Section alignment */
-+  Elf32_Word	sh_entsize;		/* Entry size if section holds table */
-+} Elf32_Shdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	sh_name;		/* Section name (string tbl index) */
-+  Elf64_Word	sh_type;		/* Section type */
-+  Elf64_Xword	sh_flags;		/* Section flags */
-+  Elf64_Addr	sh_addr;		/* Section virtual addr at execution */
-+  Elf64_Off	sh_offset;		/* Section file offset */
-+  Elf64_Xword	sh_size;		/* Section size in bytes */
-+  Elf64_Word	sh_link;		/* Link to another section */
-+  Elf64_Word	sh_info;		/* Additional section information */
-+  Elf64_Xword	sh_addralign;		/* Section alignment */
-+  Elf64_Xword	sh_entsize;		/* Entry size if section holds table */
-+} Elf64_Shdr;
-+
-+/* Special section indices.  */
-+
-+#define SHN_UNDEF	0		/* Undefined section */
-+#define SHN_LORESERVE	0xff00		/* Start of reserved indices */
-+#define SHN_LOPROC	0xff00		/* Start of processor-specific */
-+#define SHN_BEFORE	0xff00		/* Order section before all others
-+					   (Solaris).  */
-+#define SHN_AFTER	0xff01		/* Order section after all others
-+					   (Solaris).  */
-+#define SHN_HIPROC	0xff1f		/* End of processor-specific */
-+#define SHN_LOOS	0xff20		/* Start of OS-specific */
-+#define SHN_HIOS	0xff3f		/* End of OS-specific */
-+#define SHN_ABS		0xfff1		/* Associated symbol is absolute */
-+#define SHN_COMMON	0xfff2		/* Associated symbol is common */
-+#define SHN_XINDEX	0xffff		/* Index is in extra table.  */
-+#define SHN_HIRESERVE	0xffff		/* End of reserved indices */
-+
-+/* Legal values for sh_type (section type).  */
-+
-+#define SHT_NULL	  0		/* Section header table entry unused */
-+#define SHT_PROGBITS	  1		/* Program data */
-+#define SHT_SYMTAB	  2		/* Symbol table */
-+#define SHT_STRTAB	  3		/* String table */
-+#define SHT_RELA	  4		/* Relocation entries with addends */
-+#define SHT_HASH	  5		/* Symbol hash table */
-+#define SHT_DYNAMIC	  6		/* Dynamic linking information */
-+#define SHT_NOTE	  7		/* Notes */
-+#define SHT_NOBITS	  8		/* Program space with no data (bss) */
-+#define SHT_REL		  9		/* Relocation entries, no addends */
-+#define SHT_SHLIB	  10		/* Reserved */
-+#define SHT_DYNSYM	  11		/* Dynamic linker symbol table */
-+#define SHT_INIT_ARRAY	  14		/* Array of constructors */
-+#define SHT_FINI_ARRAY	  15		/* Array of destructors */
-+#define SHT_PREINIT_ARRAY 16		/* Array of pre-constructors */
-+#define SHT_GROUP	  17		/* Section group */
-+#define SHT_SYMTAB_SHNDX  18		/* Extended section indeces */
-+#define	SHT_NUM		  19		/* Number of defined types.  */
-+#define SHT_LOOS	  0x60000000	/* Start OS-specific.  */
-+#define SHT_GNU_ATTRIBUTES 0x6ffffff5	/* Object attributes.  */
-+#define SHT_GNU_HASH	  0x6ffffff6	/* GNU-style hash table.  */
-+#define SHT_GNU_LIBLIST	  0x6ffffff7	/* Prelink library list */
-+#define SHT_CHECKSUM	  0x6ffffff8	/* Checksum for DSO content.  */
-+#define SHT_LOSUNW	  0x6ffffffa	/* Sun-specific low bound.  */
-+#define SHT_SUNW_move	  0x6ffffffa
-+#define SHT_SUNW_COMDAT   0x6ffffffb
-+#define SHT_SUNW_syminfo  0x6ffffffc
-+#define SHT_GNU_verdef	  0x6ffffffd	/* Version definition section.  */
-+#define SHT_GNU_verneed	  0x6ffffffe	/* Version needs section.  */
-+#define SHT_GNU_versym	  0x6fffffff	/* Version symbol table.  */
-+#define SHT_HISUNW	  0x6fffffff	/* Sun-specific high bound.  */
-+#define SHT_HIOS	  0x6fffffff	/* End OS-specific type */
-+#define SHT_LOPROC	  0x70000000	/* Start of processor-specific */
-+#define SHT_HIPROC	  0x7fffffff	/* End of processor-specific */
-+#define SHT_LOUSER	  0x80000000	/* Start of application-specific */
-+#define SHT_HIUSER	  0x8fffffff	/* End of application-specific */
-+
-+/* Legal values for sh_flags (section flags).  */
-+
-+#define SHF_WRITE	     (1 << 0)	/* Writable */
-+#define SHF_ALLOC	     (1 << 1)	/* Occupies memory during execution */
-+#define SHF_EXECINSTR	     (1 << 2)	/* Executable */
-+#define SHF_MERGE	     (1 << 4)	/* Might be merged */
-+#define SHF_STRINGS	     (1 << 5)	/* Contains nul-terminated strings */
-+#define SHF_INFO_LINK	     (1 << 6)	/* `sh_info' contains SHT index */
-+#define SHF_LINK_ORDER	     (1 << 7)	/* Preserve order after combining */
-+#define SHF_OS_NONCONFORMING (1 << 8)	/* Non-standard OS specific handling
-+					   required */
-+#define SHF_GROUP	     (1 << 9)	/* Section is member of a group.  */
-+#define SHF_TLS		     (1 << 10)	/* Section hold thread-local data.  */
-+#define SHF_MASKOS	     0x0ff00000	/* OS-specific.  */
-+#define SHF_MASKPROC	     0xf0000000	/* Processor-specific */
-+#define SHF_ORDERED	     (1 << 30)	/* Special ordering requirement
-+					   (Solaris).  */
-+#define SHF_EXCLUDE	     (1 << 31)	/* Section is excluded unless
-+					   referenced or allocated (Solaris).*/
-+
-+/* Section group handling.  */
-+#define GRP_COMDAT	0x1		/* Mark group as COMDAT.  */
-+
-+/* Symbol table entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	st_name;		/* Symbol name (string tbl index) */
-+  Elf32_Addr	st_value;		/* Symbol value */
-+  Elf32_Word	st_size;		/* Symbol size */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char	st_other;		/* Symbol visibility */
-+  Elf32_Section	st_shndx;		/* Section index */
-+} Elf32_Sym;
-+
-+typedef struct
-+{
-+  Elf64_Word	st_name;		/* Symbol name (string tbl index) */
-+  unsigned char	st_info;		/* Symbol type and binding */
-+  unsigned char st_other;		/* Symbol visibility */
-+  Elf64_Section	st_shndx;		/* Section index */
-+  Elf64_Addr	st_value;		/* Symbol value */
-+  Elf64_Xword	st_size;		/* Symbol size */
-+} Elf64_Sym;
-+
-+/* The syminfo section if available contains additional information about
-+   every dynamic symbol.  */
-+
-+typedef struct
-+{
-+  Elf32_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf32_Half si_flags;			/* Per symbol flags */
-+} Elf32_Syminfo;
-+
-+typedef struct
-+{
-+  Elf64_Half si_boundto;		/* Direct bindings, symbol bound to */
-+  Elf64_Half si_flags;			/* Per symbol flags */
-+} Elf64_Syminfo;
-+
-+/* Possible values for si_boundto.  */
-+#define SYMINFO_BT_SELF		0xffff	/* Symbol bound to self */
-+#define SYMINFO_BT_PARENT	0xfffe	/* Symbol bound to parent */
-+#define SYMINFO_BT_LOWRESERVE	0xff00	/* Beginning of reserved entries */
-+
-+/* Possible bitmasks for si_flags.  */
-+#define SYMINFO_FLG_DIRECT	0x0001	/* Direct bound symbol */
-+#define SYMINFO_FLG_PASSTHRU	0x0002	/* Pass-thru symbol for translator */
-+#define SYMINFO_FLG_COPY	0x0004	/* Symbol is a copy-reloc */
-+#define SYMINFO_FLG_LAZYLOAD	0x0008	/* Symbol bound to object to be lazy
-+					   loaded */
-+/* Syminfo version values.  */
-+#define SYMINFO_NONE		0
-+#define SYMINFO_CURRENT		1
-+#define SYMINFO_NUM		2
-+
-+
-+/* How to extract and insert information held in the st_info field.  */
-+
-+#define ELF32_ST_BIND(val)		(((unsigned char) (val)) >> 4)
-+#define ELF32_ST_TYPE(val)		((val) & 0xf)
-+#define ELF32_ST_INFO(bind, type)	(((bind) << 4) + ((type) & 0xf))
-+
-+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field.  */
-+#define ELF64_ST_BIND(val)		ELF32_ST_BIND (val)
-+#define ELF64_ST_TYPE(val)		ELF32_ST_TYPE (val)
-+#define ELF64_ST_INFO(bind, type)	ELF32_ST_INFO ((bind), (type))
-+
-+/* Legal values for ST_BIND subfield of st_info (symbol binding).  */
-+
-+#define STB_LOCAL	0		/* Local symbol */
-+#define STB_GLOBAL	1		/* Global symbol */
-+#define STB_WEAK	2		/* Weak symbol */
-+#define	STB_NUM		3		/* Number of defined types.  */
-+#define STB_LOOS	10		/* Start of OS-specific */
-+#define STB_GNU_UNIQUE	10		/* Unique symbol.  */
-+#define STB_HIOS	12		/* End of OS-specific */
-+#define STB_LOPROC	13		/* Start of processor-specific */
-+#define STB_HIPROC	15		/* End of processor-specific */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_NOTYPE	0		/* Symbol type is unspecified */
-+#define STT_OBJECT	1		/* Symbol is a data object */
-+#define STT_FUNC	2		/* Symbol is a code object */
-+#define STT_SECTION	3		/* Symbol associated with a section */
-+#define STT_FILE	4		/* Symbol's name is file name */
-+#define STT_COMMON	5		/* Symbol is a common data object */
-+#define STT_TLS		6		/* Symbol is thread-local data object*/
-+#define	STT_NUM		7		/* Number of defined types.  */
-+#define STT_LOOS	10		/* Start of OS-specific */
-+#define STT_GNU_IFUNC	10		/* Symbol is indirect code object */
-+#define STT_HIOS	12		/* End of OS-specific */
-+#define STT_LOPROC	13		/* Start of processor-specific */
-+#define STT_HIPROC	15		/* End of processor-specific */
-+
-+
-+/* Symbol table indices are found in the hash buckets and chain table
-+   of a symbol hash table section.  This special index value indicates
-+   the end of a chain, meaning no further symbols are found in that bucket.  */
-+
-+#define STN_UNDEF	0		/* End of a chain.  */
-+
-+
-+/* How to extract and insert information held in the st_other field.  */
-+
-+#define ELF32_ST_VISIBILITY(o)	((o) & 0x03)
-+
-+/* For ELF64 the definitions are the same.  */
-+#define ELF64_ST_VISIBILITY(o)	ELF32_ST_VISIBILITY (o)
-+
-+/* Symbol visibility specification encoded in the st_other field.  */
-+#define STV_DEFAULT	0		/* Default symbol visibility rules */
-+#define STV_INTERNAL	1		/* Processor specific hidden class */
-+#define STV_HIDDEN	2		/* Sym unavailable in other modules */
-+#define STV_PROTECTED	3		/* Not preemptible, not exported */
-+
-+
-+/* Relocation table entry without addend (in section of type SHT_REL).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+} Elf32_Rel;
-+
-+/* I have seen two different definitions of the Elf64_Rel and
-+   Elf64_Rela structures, so we'll leave them out until Novell (or
-+   whoever) gets their act together.  */
-+/* The following, at least, is used on Sparc v9, MIPS, and Alpha.  */
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+} Elf64_Rel;
-+
-+/* Relocation table entry with addend (in section of type SHT_RELA).  */
-+
-+typedef struct
-+{
-+  Elf32_Addr	r_offset;		/* Address */
-+  Elf32_Word	r_info;			/* Relocation type and symbol index */
-+  Elf32_Sword	r_addend;		/* Addend */
-+} Elf32_Rela;
-+
-+typedef struct
-+{
-+  Elf64_Addr	r_offset;		/* Address */
-+  Elf64_Xword	r_info;			/* Relocation type and symbol index */
-+  Elf64_Sxword	r_addend;		/* Addend */
-+} Elf64_Rela;
-+
-+/* How to extract and insert information held in the r_info field.  */
-+
-+#define ELF32_R_SYM(val)		((val) >> 8)
-+#define ELF32_R_TYPE(val)		((val) & 0xff)
-+#define ELF32_R_INFO(sym, type)		(((sym) << 8) + ((type) & 0xff))
-+
-+#define ELF64_R_SYM(i)			((i) >> 32)
-+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
-+#define ELF64_R_INFO(sym,type)		((((Elf64_Xword) (sym)) << 32) + (type))
-+
-+/* Program segment header.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	p_type;			/* Segment type */
-+  Elf32_Off	p_offset;		/* Segment file offset */
-+  Elf32_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf32_Addr	p_paddr;		/* Segment physical address */
-+  Elf32_Word	p_filesz;		/* Segment size in file */
-+  Elf32_Word	p_memsz;		/* Segment size in memory */
-+  Elf32_Word	p_flags;		/* Segment flags */
-+  Elf32_Word	p_align;		/* Segment alignment */
-+} Elf32_Phdr;
-+
-+typedef struct
-+{
-+  Elf64_Word	p_type;			/* Segment type */
-+  Elf64_Word	p_flags;		/* Segment flags */
-+  Elf64_Off	p_offset;		/* Segment file offset */
-+  Elf64_Addr	p_vaddr;		/* Segment virtual address */
-+  Elf64_Addr	p_paddr;		/* Segment physical address */
-+  Elf64_Xword	p_filesz;		/* Segment size in file */
-+  Elf64_Xword	p_memsz;		/* Segment size in memory */
-+  Elf64_Xword	p_align;		/* Segment alignment */
-+} Elf64_Phdr;
-+
-+/* Special value for e_phnum.  This indicates that the real number of
-+   program headers is too large to fit into e_phnum.  Instead the real
-+   value is in the field sh_info of section 0.  */
-+
-+#define PN_XNUM		0xffff
-+
-+/* Legal values for p_type (segment type).  */
-+
-+#define	PT_NULL		0		/* Program header table entry unused */
-+#define PT_LOAD		1		/* Loadable program segment */
-+#define PT_DYNAMIC	2		/* Dynamic linking information */
-+#define PT_INTERP	3		/* Program interpreter */
-+#define PT_NOTE		4		/* Auxiliary information */
-+#define PT_SHLIB	5		/* Reserved */
-+#define PT_PHDR		6		/* Entry for header table itself */
-+#define PT_TLS		7		/* Thread-local storage segment */
-+#define	PT_NUM		8		/* Number of defined types */
-+#define PT_LOOS		0x60000000	/* Start of OS-specific */
-+#define PT_GNU_EH_FRAME	0x6474e550	/* GCC .eh_frame_hdr segment */
-+#define PT_GNU_STACK	0x6474e551	/* Indicates stack executability */
-+#define PT_GNU_RELRO	0x6474e552	/* Read-only after relocation */
-+#define PT_LOSUNW	0x6ffffffa
-+#define PT_SUNWBSS	0x6ffffffa	/* Sun Specific segment */
-+#define PT_SUNWSTACK	0x6ffffffb	/* Stack segment */
-+#define PT_HISUNW	0x6fffffff
-+#define PT_HIOS		0x6fffffff	/* End of OS-specific */
-+#define PT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define PT_HIPROC	0x7fffffff	/* End of processor-specific */
-+
-+/* Legal values for p_flags (segment flags).  */
-+
-+#define PF_X		(1 << 0)	/* Segment is executable */
-+#define PF_W		(1 << 1)	/* Segment is writable */
-+#define PF_R		(1 << 2)	/* Segment is readable */
-+#define PF_MASKOS	0x0ff00000	/* OS-specific */
-+#define PF_MASKPROC	0xf0000000	/* Processor-specific */
-+
-+/* Legal values for note segment descriptor types for core files. */
-+
-+#define NT_PRSTATUS	1		/* Contains copy of prstatus struct */
-+#define NT_FPREGSET	2		/* Contains copy of fpregset struct */
-+#define NT_PRPSINFO	3		/* Contains copy of prpsinfo struct */
-+#define NT_PRXREG	4		/* Contains copy of prxregset struct */
-+#define NT_TASKSTRUCT	4		/* Contains copy of task structure */
-+#define NT_PLATFORM	5		/* String from sysinfo(SI_PLATFORM) */
-+#define NT_AUXV		6		/* Contains copy of auxv array */
-+#define NT_GWINDOWS	7		/* Contains copy of gwindows struct */
-+#define NT_ASRS		8		/* Contains copy of asrset struct */
-+#define NT_PSTATUS	10		/* Contains copy of pstatus struct */
-+#define NT_PSINFO	13		/* Contains copy of psinfo struct */
-+#define NT_PRCRED	14		/* Contains copy of prcred struct */
-+#define NT_UTSNAME	15		/* Contains copy of utsname struct */
-+#define NT_LWPSTATUS	16		/* Contains copy of lwpstatus struct */
-+#define NT_LWPSINFO	17		/* Contains copy of lwpinfo struct */
-+#define NT_PRFPXREG	20		/* Contains copy of fprxregset struct */
-+#define NT_PRXFPREG	0x46e62b7f	/* Contains copy of user_fxsr_struct */
-+#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
-+#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
-+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
-+#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
-+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
-+#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
-+
-+/* Legal values for the note segment descriptor types for object files.  */
-+
-+#define NT_VERSION	1		/* Contains a version string.  */
-+
-+
-+/* Dynamic section entry.  */
-+
-+typedef struct
-+{
-+  Elf32_Sword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf32_Word d_val;			/* Integer value */
-+      Elf32_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf32_Dyn;
-+
-+typedef struct
-+{
-+  Elf64_Sxword	d_tag;			/* Dynamic entry type */
-+  union
-+    {
-+      Elf64_Xword d_val;		/* Integer value */
-+      Elf64_Addr d_ptr;			/* Address value */
-+    } d_un;
-+} Elf64_Dyn;
-+
-+/* Legal values for d_tag (dynamic entry type).  */
-+
-+#define DT_NULL		0		/* Marks end of dynamic section */
-+#define DT_NEEDED	1		/* Name of needed library */
-+#define DT_PLTRELSZ	2		/* Size in bytes of PLT relocs */
-+#define DT_PLTGOT	3		/* Processor defined value */
-+#define DT_HASH		4		/* Address of symbol hash table */
-+#define DT_STRTAB	5		/* Address of string table */
-+#define DT_SYMTAB	6		/* Address of symbol table */
-+#define DT_RELA		7		/* Address of Rela relocs */
-+#define DT_RELASZ	8		/* Total size of Rela relocs */
-+#define DT_RELAENT	9		/* Size of one Rela reloc */
-+#define DT_STRSZ	10		/* Size of string table */
-+#define DT_SYMENT	11		/* Size of one symbol table entry */
-+#define DT_INIT		12		/* Address of init function */
-+#define DT_FINI		13		/* Address of termination function */
-+#define DT_SONAME	14		/* Name of shared object */
-+#define DT_RPATH	15		/* Library search path (deprecated) */
-+#define DT_SYMBOLIC	16		/* Start symbol search here */
-+#define DT_REL		17		/* Address of Rel relocs */
-+#define DT_RELSZ	18		/* Total size of Rel relocs */
-+#define DT_RELENT	19		/* Size of one Rel reloc */
-+#define DT_PLTREL	20		/* Type of reloc in PLT */
-+#define DT_DEBUG	21		/* For debugging; unspecified */
-+#define DT_TEXTREL	22		/* Reloc might modify .text */
-+#define DT_JMPREL	23		/* Address of PLT relocs */
-+#define	DT_BIND_NOW	24		/* Process relocations of object */
-+#define	DT_INIT_ARRAY	25		/* Array with addresses of init fct */
-+#define	DT_FINI_ARRAY	26		/* Array with addresses of fini fct */
-+#define	DT_INIT_ARRAYSZ	27		/* Size in bytes of DT_INIT_ARRAY */
-+#define	DT_FINI_ARRAYSZ	28		/* Size in bytes of DT_FINI_ARRAY */
-+#define DT_RUNPATH	29		/* Library search path */
-+#define DT_FLAGS	30		/* Flags for the object being loaded */
-+#define DT_ENCODING	32		/* Start of encoded range */
-+#define DT_PREINIT_ARRAY 32		/* Array with addresses of preinit fct*/
-+#define DT_PREINIT_ARRAYSZ 33		/* size in bytes of DT_PREINIT_ARRAY */
-+#define	DT_NUM		34		/* Number used */
-+#define DT_LOOS		0x6000000d	/* Start of OS-specific */
-+#define DT_HIOS		0x6ffff000	/* End of OS-specific */
-+#define DT_LOPROC	0x70000000	/* Start of processor-specific */
-+#define DT_HIPROC	0x7fffffff	/* End of processor-specific */
-+#define	DT_PROCNUM	DT_MIPS_NUM	/* Most used by any processor */
-+
-+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
-+   Dyn.d_un.d_val field of the Elf*_Dyn structure.  This follows Sun's
-+   approach.  */
-+#define DT_VALRNGLO	0x6ffffd00
-+#define DT_GNU_PRELINKED 0x6ffffdf5	/* Prelinking timestamp */
-+#define DT_GNU_CONFLICTSZ 0x6ffffdf6	/* Size of conflict section */
-+#define DT_GNU_LIBLISTSZ 0x6ffffdf7	/* Size of library list */
-+#define DT_CHECKSUM	0x6ffffdf8
-+#define DT_PLTPADSZ	0x6ffffdf9
-+#define DT_MOVEENT	0x6ffffdfa
-+#define DT_MOVESZ	0x6ffffdfb
-+#define DT_FEATURE_1	0x6ffffdfc	/* Feature selection (DTF_*).  */
-+#define DT_POSFLAG_1	0x6ffffdfd	/* Flags for DT_* entries, effecting
-+					   the following DT_* entry.  */
-+#define DT_SYMINSZ	0x6ffffdfe	/* Size of syminfo table (in bytes) */
-+#define DT_SYMINENT	0x6ffffdff	/* Entry size of syminfo */
-+#define DT_VALRNGHI	0x6ffffdff
-+#define DT_VALTAGIDX(tag)	(DT_VALRNGHI - (tag))	/* Reverse order! */
-+#define DT_VALNUM 12
-+
-+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
-+   Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
-+
-+   If any adjustment is made to the ELF object after it has been
-+   built these entries will need to be adjusted.  */
-+#define DT_ADDRRNGLO	0x6ffffe00
-+#define DT_GNU_HASH	0x6ffffef5	/* GNU-style hash table.  */
-+#define DT_TLSDESC_PLT	0x6ffffef6
-+#define DT_TLSDESC_GOT	0x6ffffef7
-+#define DT_GNU_CONFLICT	0x6ffffef8	/* Start of conflict section */
-+#define DT_GNU_LIBLIST	0x6ffffef9	/* Library list */
-+#define DT_CONFIG	0x6ffffefa	/* Configuration information.  */
-+#define DT_DEPAUDIT	0x6ffffefb	/* Dependency auditing.  */
-+#define DT_AUDIT	0x6ffffefc	/* Object auditing.  */
-+#define	DT_PLTPAD	0x6ffffefd	/* PLT padding.  */
-+#define	DT_MOVETAB	0x6ffffefe	/* Move table.  */
-+#define DT_SYMINFO	0x6ffffeff	/* Syminfo table.  */
-+#define DT_ADDRRNGHI	0x6ffffeff
-+#define DT_ADDRTAGIDX(tag)	(DT_ADDRRNGHI - (tag))	/* Reverse order! */
-+#define DT_ADDRNUM 11
-+
-+/* The versioning entry types.  The next are defined as part of the
-+   GNU extension.  */
-+#define DT_VERSYM	0x6ffffff0
-+
-+#define DT_RELACOUNT	0x6ffffff9
-+#define DT_RELCOUNT	0x6ffffffa
-+
-+/* These were chosen by Sun.  */
-+#define DT_FLAGS_1	0x6ffffffb	/* State flags, see DF_1_* below.  */
-+#define	DT_VERDEF	0x6ffffffc	/* Address of version definition
-+					   table */
-+#define	DT_VERDEFNUM	0x6ffffffd	/* Number of version definitions */
-+#define	DT_VERNEED	0x6ffffffe	/* Address of table with needed
-+					   versions */
-+#define	DT_VERNEEDNUM	0x6fffffff	/* Number of needed versions */
-+#define DT_VERSIONTAGIDX(tag)	(DT_VERNEEDNUM - (tag))	/* Reverse order! */
-+#define DT_VERSIONTAGNUM 16
-+
-+/* Sun added these machine-independent extensions in the "processor-specific"
-+   range.  Be compatible.  */
-+#define DT_AUXILIARY    0x7ffffffd      /* Shared object to load before self */
-+#define DT_FILTER       0x7fffffff      /* Shared object to get values from */
-+#define DT_EXTRATAGIDX(tag)	((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
-+#define DT_EXTRANUM	3
-+
-+/* Values of `d_un.d_val' in the DT_FLAGS entry.  */
-+#define DF_ORIGIN	0x00000001	/* Object may use DF_ORIGIN */
-+#define DF_SYMBOLIC	0x00000002	/* Symbol resolutions starts here */
-+#define DF_TEXTREL	0x00000004	/* Object contains text relocations */
-+#define DF_BIND_NOW	0x00000008	/* No lazy binding for this object */
-+#define DF_STATIC_TLS	0x00000010	/* Module uses the static TLS model */
-+
-+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
-+   entry in the dynamic section.  */
-+#define DF_1_NOW	0x00000001	/* Set RTLD_NOW for this object.  */
-+#define DF_1_GLOBAL	0x00000002	/* Set RTLD_GLOBAL for this object.  */
-+#define DF_1_GROUP	0x00000004	/* Set RTLD_GROUP for this object.  */
-+#define DF_1_NODELETE	0x00000008	/* Set RTLD_NODELETE for this object.*/
-+#define DF_1_LOADFLTR	0x00000010	/* Trigger filtee loading at runtime.*/
-+#define DF_1_INITFIRST	0x00000020	/* Set RTLD_INITFIRST for this object*/
-+#define DF_1_NOOPEN	0x00000040	/* Set RTLD_NOOPEN for this object.  */
-+#define DF_1_ORIGIN	0x00000080	/* $ORIGIN must be handled.  */
-+#define DF_1_DIRECT	0x00000100	/* Direct binding enabled.  */
-+#define DF_1_TRANS	0x00000200
-+#define DF_1_INTERPOSE	0x00000400	/* Object is used to interpose.  */
-+#define DF_1_NODEFLIB	0x00000800	/* Ignore default lib search path.  */
-+#define DF_1_NODUMP	0x00001000	/* Object can't be dldump'ed.  */
-+#define DF_1_CONFALT	0x00002000	/* Configuration alternative created.*/
-+#define DF_1_ENDFILTEE	0x00004000	/* Filtee terminates filters search. */
-+#define	DF_1_DISPRELDNE	0x00008000	/* Disp reloc applied at build time. */
-+#define	DF_1_DISPRELPND	0x00010000	/* Disp reloc applied at run-time.  */
-+
-+/* Flags for the feature selection in DT_FEATURE_1.  */
-+#define DTF_1_PARINIT	0x00000001
-+#define DTF_1_CONFEXP	0x00000002
-+
-+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry.  */
-+#define DF_P1_LAZYLOAD	0x00000001	/* Lazyload following object.  */
-+#define DF_P1_GROUPPERM	0x00000002	/* Symbols from next object are not
-+					   generally available.  */
-+
-+/* Version definition sections.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vd_version;		/* Version revision */
-+  Elf32_Half	vd_flags;		/* Version information */
-+  Elf32_Half	vd_ndx;			/* Version Index */
-+  Elf32_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vd_hash;		/* Version name hash value */
-+  Elf32_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf32_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf32_Verdef;
-+
-+typedef struct
-+{
-+  Elf64_Half	vd_version;		/* Version revision */
-+  Elf64_Half	vd_flags;		/* Version information */
-+  Elf64_Half	vd_ndx;			/* Version Index */
-+  Elf64_Half	vd_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vd_hash;		/* Version name hash value */
-+  Elf64_Word	vd_aux;			/* Offset in bytes to verdaux array */
-+  Elf64_Word	vd_next;		/* Offset in bytes to next verdef
-+					   entry */
-+} Elf64_Verdef;
-+
-+
-+/* Legal values for vd_version (version revision).  */
-+#define VER_DEF_NONE	0		/* No version */
-+#define VER_DEF_CURRENT	1		/* Current version */
-+#define VER_DEF_NUM	2		/* Given version number */
-+
-+/* Legal values for vd_flags (version information flags).  */
-+#define VER_FLG_BASE	0x1		/* Version definition of file itself */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+/* Versym symbol index values.  */
-+#define	VER_NDX_LOCAL		0	/* Symbol is local.  */
-+#define	VER_NDX_GLOBAL		1	/* Symbol is global.  */
-+#define	VER_NDX_LORESERVE	0xff00	/* Beginning of reserved entries.  */
-+#define	VER_NDX_ELIMINATE	0xff01	/* Symbol is to be eliminated.  */
-+
-+/* Auxialiary version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vda_name;		/* Version or dependency names */
-+  Elf32_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf32_Verdaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vda_name;		/* Version or dependency names */
-+  Elf64_Word	vda_next;		/* Offset in bytes to next verdaux
-+					   entry */
-+} Elf64_Verdaux;
-+
-+
-+/* Version dependency section.  */
-+
-+typedef struct
-+{
-+  Elf32_Half	vn_version;		/* Version of structure */
-+  Elf32_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf32_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf32_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf32_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf32_Verneed;
-+
-+typedef struct
-+{
-+  Elf64_Half	vn_version;		/* Version of structure */
-+  Elf64_Half	vn_cnt;			/* Number of associated aux entries */
-+  Elf64_Word	vn_file;		/* Offset of filename for this
-+					   dependency */
-+  Elf64_Word	vn_aux;			/* Offset in bytes to vernaux array */
-+  Elf64_Word	vn_next;		/* Offset in bytes to next verneed
-+					   entry */
-+} Elf64_Verneed;
-+
-+
-+/* Legal values for vn_version (version revision).  */
-+#define VER_NEED_NONE	 0		/* No version */
-+#define VER_NEED_CURRENT 1		/* Current version */
-+#define VER_NEED_NUM	 2		/* Given version number */
-+
-+/* Auxiliary needed version information.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf32_Half	vna_flags;		/* Dependency specific information */
-+  Elf32_Half	vna_other;		/* Unused */
-+  Elf32_Word	vna_name;		/* Dependency name string offset */
-+  Elf32_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf32_Vernaux;
-+
-+typedef struct
-+{
-+  Elf64_Word	vna_hash;		/* Hash value of dependency name */
-+  Elf64_Half	vna_flags;		/* Dependency specific information */
-+  Elf64_Half	vna_other;		/* Unused */
-+  Elf64_Word	vna_name;		/* Dependency name string offset */
-+  Elf64_Word	vna_next;		/* Offset in bytes to next vernaux
-+					   entry */
-+} Elf64_Vernaux;
-+
-+
-+/* Legal values for vna_flags.  */
-+#define VER_FLG_WEAK	0x2		/* Weak version identifier */
-+
-+
-+/* Auxiliary vector.  */
-+
-+/* This vector is normally only used by the program interpreter.  The
-+   usual definition in an ABI supplement uses the name auxv_t.  The
-+   vector is not usually defined in a standard <elf.h> file, but it
-+   can't hurt.  We rename it to avoid conflicts.  The sizes of these
-+   types are an arrangement between the exec server and the program
-+   interpreter, so we don't fully specify them here.  */
-+
-+typedef struct
-+{
-+  uint32_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint32_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf32_auxv_t;
-+
-+typedef struct
-+{
-+  uint64_t a_type;		/* Entry type */
-+  union
-+    {
-+      uint64_t a_val;		/* Integer value */
-+      /* We use to have pointer elements added here.  We cannot do that,
-+	 though, since it does not work when using 32-bit definitions
-+	 on 64-bit platforms and vice versa.  */
-+    } a_un;
-+} Elf64_auxv_t;
-+
-+/* Legal values for a_type (entry type).  */
-+
-+#define AT_NULL		0		/* End of vector */
-+#define AT_IGNORE	1		/* Entry should be ignored */
-+#define AT_EXECFD	2		/* File descriptor of program */
-+#define AT_PHDR		3		/* Program headers for program */
-+#define AT_PHENT	4		/* Size of program header entry */
-+#define AT_PHNUM	5		/* Number of program headers */
-+#define AT_PAGESZ	6		/* System page size */
-+#define AT_BASE		7		/* Base address of interpreter */
-+#define AT_FLAGS	8		/* Flags */
-+#define AT_ENTRY	9		/* Entry point of program */
-+#define AT_NOTELF	10		/* Program is not ELF */
-+#define AT_UID		11		/* Real uid */
-+#define AT_EUID		12		/* Effective uid */
-+#define AT_GID		13		/* Real gid */
-+#define AT_EGID		14		/* Effective gid */
-+#define AT_CLKTCK	17		/* Frequency of times() */
-+
-+/* Some more special a_type values describing the hardware.  */
-+#define AT_PLATFORM	15		/* String identifying platform.  */
-+#define AT_HWCAP	16		/* Machine dependent hints about
-+					   processor capabilities.  */
-+
-+/* This entry gives some information about the FPU initialization
-+   performed by the kernel.  */
-+#define AT_FPUCW	18		/* Used FPU control word.  */
-+
-+/* Cache block sizes.  */
-+#define AT_DCACHEBSIZE	19		/* Data cache block size.  */
-+#define AT_ICACHEBSIZE	20		/* Instruction cache block size.  */
-+#define AT_UCACHEBSIZE	21		/* Unified cache block size.  */
-+
-+/* A special ignored value for PPC, used by the kernel to control the
-+   interpretation of the AUXV. Must be > 16.  */
-+#define AT_IGNOREPPC	22		/* Entry should be ignored.  */
-+
-+#define	AT_SECURE	23		/* Boolean, was exec setuid-like?  */
-+
-+#define AT_BASE_PLATFORM 24		/* String identifying real platforms.*/
-+
-+#define AT_RANDOM	25		/* Address of 16 random bytes.  */
-+
-+#define AT_EXECFN	31		/* Filename of executable.  */
-+
-+/* Pointer to the global system page used for system calls and other
-+   nice things.  */
-+#define AT_SYSINFO	32
-+#define AT_SYSINFO_EHDR	33
-+
-+/* Shapes of the caches.  Bits 0-3 contains associativity; bits 4-7 contains
-+   log2 of line size; mask those to get cache size.  */
-+#define AT_L1I_CACHESHAPE	34
-+#define AT_L1D_CACHESHAPE	35
-+#define AT_L2_CACHESHAPE	36
-+#define AT_L3_CACHESHAPE	37
-+
-+/* Note section contents.  Each entry in the note section begins with
-+   a header of a fixed form.  */
-+
-+typedef struct
-+{
-+  Elf32_Word n_namesz;			/* Length of the note's name.  */
-+  Elf32_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf32_Word n_type;			/* Type of the note.  */
-+} Elf32_Nhdr;
-+
-+typedef struct
-+{
-+  Elf64_Word n_namesz;			/* Length of the note's name.  */
-+  Elf64_Word n_descsz;			/* Length of the note's descriptor.  */
-+  Elf64_Word n_type;			/* Type of the note.  */
-+} Elf64_Nhdr;
-+
-+/* Known names of notes.  */
-+
-+/* Solaris entries in the note section have this name.  */
-+#define ELF_NOTE_SOLARIS	"SUNW Solaris"
-+
-+/* Note entries for GNU systems have this name.  */
-+#define ELF_NOTE_GNU		"GNU"
-+
-+
-+/* Defined types of notes for Solaris.  */
-+
-+/* Value of descriptor (one word) is desired pagesize for the binary.  */
-+#define ELF_NOTE_PAGESIZE_HINT	1
-+
-+
-+/* Defined note types for GNU systems.  */
-+
-+/* ABI information.  The descriptor consists of words:
-+   word 0: OS descriptor
-+   word 1: major version of the ABI
-+   word 2: minor version of the ABI
-+   word 3: subminor version of the ABI
-+*/
-+#define NT_GNU_ABI_TAG	1
-+#define ELF_NOTE_ABI	NT_GNU_ABI_TAG /* Old name.  */
-+
-+/* Known OSes.  These values can appear in word 0 of an
-+   NT_GNU_ABI_TAG note section entry.  */
-+#define ELF_NOTE_OS_LINUX	0
-+#define ELF_NOTE_OS_GNU		1
-+#define ELF_NOTE_OS_SOLARIS2	2
-+#define ELF_NOTE_OS_FREEBSD	3
-+
-+/* Synthetic hwcap information.  The descriptor begins with two words:
-+   word 0: number of entries
-+   word 1: bitmask of enabled entries
-+   Then follow variable-length entries, one byte followed by a
-+   '\0'-terminated hwcap name string.  The byte gives the bit
-+   number to test if enabled, (1U << bit) & bitmask.  */
-+#define NT_GNU_HWCAP	2
-+
-+/* Build ID bits as generated by ld --build-id.
-+   The descriptor consists of any nonzero number of bytes.  */
-+#define NT_GNU_BUILD_ID	3
-+
-+/* Version note generated by GNU gold containing a version string.  */
-+#define NT_GNU_GOLD_VERSION	4
-+
-+
-+/* Move records.  */
-+typedef struct
-+{
-+  Elf32_Xword m_value;		/* Symbol value.  */
-+  Elf32_Word m_info;		/* Size and index.  */
-+  Elf32_Word m_poffset;		/* Symbol offset.  */
-+  Elf32_Half m_repeat;		/* Repeat count.  */
-+  Elf32_Half m_stride;		/* Stride info.  */
-+} Elf32_Move;
-+
-+typedef struct
-+{
-+  Elf64_Xword m_value;		/* Symbol value.  */
-+  Elf64_Xword m_info;		/* Size and index.  */
-+  Elf64_Xword m_poffset;	/* Symbol offset.  */
-+  Elf64_Half m_repeat;		/* Repeat count.  */
-+  Elf64_Half m_stride;		/* Stride info.  */
-+} Elf64_Move;
-+
-+/* Macro to construct move records.  */
-+#define ELF32_M_SYM(info)	((info) >> 8)
-+#define ELF32_M_SIZE(info)	((unsigned char) (info))
-+#define ELF32_M_INFO(sym, size)	(((sym) << 8) + (unsigned char) (size))
-+
-+#define ELF64_M_SYM(info)	ELF32_M_SYM (info)
-+#define ELF64_M_SIZE(info)	ELF32_M_SIZE (info)
-+#define ELF64_M_INFO(sym, size)	ELF32_M_INFO (sym, size)
-+
-+
-+/* Motorola 68k specific definitions.  */
-+
-+/* Values for Elf32_Ehdr.e_flags.  */
-+#define EF_CPU32	0x00810000
-+
-+/* m68k relocs.  */
-+
-+#define R_68K_NONE	0		/* No reloc */
-+#define R_68K_32	1		/* Direct 32 bit  */
-+#define R_68K_16	2		/* Direct 16 bit  */
-+#define R_68K_8		3		/* Direct 8 bit  */
-+#define R_68K_PC32	4		/* PC relative 32 bit */
-+#define R_68K_PC16	5		/* PC relative 16 bit */
-+#define R_68K_PC8	6		/* PC relative 8 bit */
-+#define R_68K_GOT32	7		/* 32 bit PC relative GOT entry */
-+#define R_68K_GOT16	8		/* 16 bit PC relative GOT entry */
-+#define R_68K_GOT8	9		/* 8 bit PC relative GOT entry */
-+#define R_68K_GOT32O	10		/* 32 bit GOT offset */
-+#define R_68K_GOT16O	11		/* 16 bit GOT offset */
-+#define R_68K_GOT8O	12		/* 8 bit GOT offset */
-+#define R_68K_PLT32	13		/* 32 bit PC relative PLT address */
-+#define R_68K_PLT16	14		/* 16 bit PC relative PLT address */
-+#define R_68K_PLT8	15		/* 8 bit PC relative PLT address */
-+#define R_68K_PLT32O	16		/* 32 bit PLT offset */
-+#define R_68K_PLT16O	17		/* 16 bit PLT offset */
-+#define R_68K_PLT8O	18		/* 8 bit PLT offset */
-+#define R_68K_COPY	19		/* Copy symbol at runtime */
-+#define R_68K_GLOB_DAT	20		/* Create GOT entry */
-+#define R_68K_JMP_SLOT	21		/* Create PLT entry */
-+#define R_68K_RELATIVE	22		/* Adjust by program base */
-+#define R_68K_TLS_GD32      25          /* 32 bit GOT offset for GD */
-+#define R_68K_TLS_GD16      26          /* 16 bit GOT offset for GD */
-+#define R_68K_TLS_GD8       27          /* 8 bit GOT offset for GD */
-+#define R_68K_TLS_LDM32     28          /* 32 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM16     29          /* 16 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM8      30          /* 8 bit GOT offset for LDM */
-+#define R_68K_TLS_LDO32     31          /* 32 bit module-relative offset */
-+#define R_68K_TLS_LDO16     32          /* 16 bit module-relative offset */
-+#define R_68K_TLS_LDO8      33          /* 8 bit module-relative offset */
-+#define R_68K_TLS_IE32      34          /* 32 bit GOT offset for IE */
-+#define R_68K_TLS_IE16      35          /* 16 bit GOT offset for IE */
-+#define R_68K_TLS_IE8       36          /* 8 bit GOT offset for IE */
-+#define R_68K_TLS_LE32      37          /* 32 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE16      38          /* 16 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_LE8       39          /* 8 bit offset relative to
-+					   static TLS block */
-+#define R_68K_TLS_DTPMOD32  40          /* 32 bit module number */
-+#define R_68K_TLS_DTPREL32  41          /* 32 bit module-relative offset */
-+#define R_68K_TLS_TPREL32   42          /* 32 bit TP-relative offset */
-+/* Keep this the last entry.  */
-+#define R_68K_NUM	43
-+
-+/* Intel 80386 specific definitions.  */
-+
-+/* i386 relocs.  */
-+
-+#define R_386_NONE	   0		/* No reloc */
-+#define R_386_32	   1		/* Direct 32 bit  */
-+#define R_386_PC32	   2		/* PC relative 32 bit */
-+#define R_386_GOT32	   3		/* 32 bit GOT entry */
-+#define R_386_PLT32	   4		/* 32 bit PLT address */
-+#define R_386_COPY	   5		/* Copy symbol at runtime */
-+#define R_386_GLOB_DAT	   6		/* Create GOT entry */
-+#define R_386_JMP_SLOT	   7		/* Create PLT entry */
-+#define R_386_RELATIVE	   8		/* Adjust by program base */
-+#define R_386_GOTOFF	   9		/* 32 bit offset to GOT */
-+#define R_386_GOTPC	   10		/* 32 bit PC relative offset to GOT */
-+#define R_386_32PLT	   11
-+#define R_386_TLS_TPOFF	   14		/* Offset in static TLS block */
-+#define R_386_TLS_IE	   15		/* Address of GOT entry for static TLS
-+					   block offset */
-+#define R_386_TLS_GOTIE	   16		/* GOT entry for static TLS block
-+					   offset */
-+#define R_386_TLS_LE	   17		/* Offset relative to static TLS
-+					   block */
-+#define R_386_TLS_GD	   18		/* Direct 32 bit for GNU version of
-+					   general dynamic thread local data */
-+#define R_386_TLS_LDM	   19		/* Direct 32 bit for GNU version of
-+					   local dynamic thread local data
-+					   in LE code */
-+#define R_386_16	   20
-+#define R_386_PC16	   21
-+#define R_386_8		   22
-+#define R_386_PC8	   23
-+#define R_386_TLS_GD_32	   24		/* Direct 32 bit for general dynamic
-+					   thread local data */
-+#define R_386_TLS_GD_PUSH  25		/* Tag for pushl in GD TLS code */
-+#define R_386_TLS_GD_CALL  26		/* Relocation for call to
-+					   __tls_get_addr() */
-+#define R_386_TLS_GD_POP   27		/* Tag for popl in GD TLS code */
-+#define R_386_TLS_LDM_32   28		/* Direct 32 bit for local dynamic
-+					   thread local data in LE code */
-+#define R_386_TLS_LDM_PUSH 29		/* Tag for pushl in LDM TLS code */
-+#define R_386_TLS_LDM_CALL 30		/* Relocation for call to
-+					   __tls_get_addr() in LDM code */
-+#define R_386_TLS_LDM_POP  31		/* Tag for popl in LDM TLS code */
-+#define R_386_TLS_LDO_32   32		/* Offset relative to TLS block */
-+#define R_386_TLS_IE_32	   33		/* GOT entry for negated static TLS
-+					   block offset */
-+#define R_386_TLS_LE_32	   34		/* Negated offset relative to static
-+					   TLS block */
-+#define R_386_TLS_DTPMOD32 35		/* ID of module containing symbol */
-+#define R_386_TLS_DTPOFF32 36		/* Offset in TLS block */
-+#define R_386_TLS_TPOFF32  37		/* Negated offset in static TLS block */
-+/* 38? */
-+#define R_386_TLS_GOTDESC  39		/* GOT offset for TLS descriptor.  */
-+#define R_386_TLS_DESC_CALL 40		/* Marker of call through TLS
-+					   descriptor for
-+					   relaxation.  */
-+#define R_386_TLS_DESC     41		/* TLS descriptor containing
-+					   pointer to code and to
-+					   argument, returning the TLS
-+					   offset for the symbol.  */
-+#define R_386_IRELATIVE	   42		/* Adjust indirectly by program base */
-+/* Keep this the last entry.  */
-+#define R_386_NUM	   43
-+
-+/* SUN SPARC specific definitions.  */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_SPARC_REGISTER	13	/* Global register reserved to app. */
-+
-+/* Values for Elf64_Ehdr.e_flags.  */
-+
-+#define EF_SPARCV9_MM		3
-+#define EF_SPARCV9_TSO		0
-+#define EF_SPARCV9_PSO		1
-+#define EF_SPARCV9_RMO		2
-+#define EF_SPARC_LEDATA		0x800000 /* little endian data */
-+#define EF_SPARC_EXT_MASK	0xFFFF00
-+#define EF_SPARC_32PLUS		0x000100 /* generic V8+ features */
-+#define EF_SPARC_SUN_US1	0x000200 /* Sun UltraSPARC1 extensions */
-+#define EF_SPARC_HAL_R1		0x000400 /* HAL R1 extensions */
-+#define EF_SPARC_SUN_US3	0x000800 /* Sun UltraSPARCIII extensions */
-+
-+/* SPARC relocs.  */
-+
-+#define R_SPARC_NONE		0	/* No reloc */
-+#define R_SPARC_8		1	/* Direct 8 bit */
-+#define R_SPARC_16		2	/* Direct 16 bit */
-+#define R_SPARC_32		3	/* Direct 32 bit */
-+#define R_SPARC_DISP8		4	/* PC relative 8 bit */
-+#define R_SPARC_DISP16		5	/* PC relative 16 bit */
-+#define R_SPARC_DISP32		6	/* PC relative 32 bit */
-+#define R_SPARC_WDISP30		7	/* PC relative 30 bit shifted */
-+#define R_SPARC_WDISP22		8	/* PC relative 22 bit shifted */
-+#define R_SPARC_HI22		9	/* High 22 bit */
-+#define R_SPARC_22		10	/* Direct 22 bit */
-+#define R_SPARC_13		11	/* Direct 13 bit */
-+#define R_SPARC_LO10		12	/* Truncated 10 bit */
-+#define R_SPARC_GOT10		13	/* Truncated 10 bit GOT entry */
-+#define R_SPARC_GOT13		14	/* 13 bit GOT entry */
-+#define R_SPARC_GOT22		15	/* 22 bit GOT entry shifted */
-+#define R_SPARC_PC10		16	/* PC relative 10 bit truncated */
-+#define R_SPARC_PC22		17	/* PC relative 22 bit shifted */
-+#define R_SPARC_WPLT30		18	/* 30 bit PC relative PLT address */
-+#define R_SPARC_COPY		19	/* Copy symbol at runtime */
-+#define R_SPARC_GLOB_DAT	20	/* Create GOT entry */
-+#define R_SPARC_JMP_SLOT	21	/* Create PLT entry */
-+#define R_SPARC_RELATIVE	22	/* Adjust by program base */
-+#define R_SPARC_UA32		23	/* Direct 32 bit unaligned */
-+
-+/* Additional Sparc64 relocs.  */
-+
-+#define R_SPARC_PLT32		24	/* Direct 32 bit ref to PLT entry */
-+#define R_SPARC_HIPLT22		25	/* High 22 bit PLT entry */
-+#define R_SPARC_LOPLT10		26	/* Truncated 10 bit PLT entry */
-+#define R_SPARC_PCPLT32		27	/* PC rel 32 bit ref to PLT entry */
-+#define R_SPARC_PCPLT22		28	/* PC rel high 22 bit PLT entry */
-+#define R_SPARC_PCPLT10		29	/* PC rel trunc 10 bit PLT entry */
-+#define R_SPARC_10		30	/* Direct 10 bit */
-+#define R_SPARC_11		31	/* Direct 11 bit */
-+#define R_SPARC_64		32	/* Direct 64 bit */
-+#define R_SPARC_OLO10		33	/* 10bit with secondary 13bit addend */
-+#define R_SPARC_HH22		34	/* Top 22 bits of direct 64 bit */
-+#define R_SPARC_HM10		35	/* High middle 10 bits of ... */
-+#define R_SPARC_LM22		36	/* Low middle 22 bits of ... */
-+#define R_SPARC_PC_HH22		37	/* Top 22 bits of pc rel 64 bit */
-+#define R_SPARC_PC_HM10		38	/* High middle 10 bit of ... */
-+#define R_SPARC_PC_LM22		39	/* Low miggle 22 bits of ... */
-+#define R_SPARC_WDISP16		40	/* PC relative 16 bit shifted */
-+#define R_SPARC_WDISP19		41	/* PC relative 19 bit shifted */
-+#define R_SPARC_GLOB_JMP	42	/* was part of v9 ABI but was removed */
-+#define R_SPARC_7		43	/* Direct 7 bit */
-+#define R_SPARC_5		44	/* Direct 5 bit */
-+#define R_SPARC_6		45	/* Direct 6 bit */
-+#define R_SPARC_DISP64		46	/* PC relative 64 bit */
-+#define R_SPARC_PLT64		47	/* Direct 64 bit ref to PLT entry */
-+#define R_SPARC_HIX22		48	/* High 22 bit complemented */
-+#define R_SPARC_LOX10		49	/* Truncated 11 bit complemented */
-+#define R_SPARC_H44		50	/* Direct high 12 of 44 bit */
-+#define R_SPARC_M44		51	/* Direct mid 22 of 44 bit */
-+#define R_SPARC_L44		52	/* Direct low 10 of 44 bit */
-+#define R_SPARC_REGISTER	53	/* Global register usage */
-+#define R_SPARC_UA64		54	/* Direct 64 bit unaligned */
-+#define R_SPARC_UA16		55	/* Direct 16 bit unaligned */
-+#define R_SPARC_TLS_GD_HI22	56
-+#define R_SPARC_TLS_GD_LO10	57
-+#define R_SPARC_TLS_GD_ADD	58
-+#define R_SPARC_TLS_GD_CALL	59
-+#define R_SPARC_TLS_LDM_HI22	60
-+#define R_SPARC_TLS_LDM_LO10	61
-+#define R_SPARC_TLS_LDM_ADD	62
-+#define R_SPARC_TLS_LDM_CALL	63
-+#define R_SPARC_TLS_LDO_HIX22	64
-+#define R_SPARC_TLS_LDO_LOX10	65
-+#define R_SPARC_TLS_LDO_ADD	66
-+#define R_SPARC_TLS_IE_HI22	67
-+#define R_SPARC_TLS_IE_LO10	68
-+#define R_SPARC_TLS_IE_LD	69
-+#define R_SPARC_TLS_IE_LDX	70
-+#define R_SPARC_TLS_IE_ADD	71
-+#define R_SPARC_TLS_LE_HIX22	72
-+#define R_SPARC_TLS_LE_LOX10	73
-+#define R_SPARC_TLS_DTPMOD32	74
-+#define R_SPARC_TLS_DTPMOD64	75
-+#define R_SPARC_TLS_DTPOFF32	76
-+#define R_SPARC_TLS_DTPOFF64	77
-+#define R_SPARC_TLS_TPOFF32	78
-+#define R_SPARC_TLS_TPOFF64	79
-+#define R_SPARC_GOTDATA_HIX22	80
-+#define R_SPARC_GOTDATA_LOX10	81
-+#define R_SPARC_GOTDATA_OP_HIX22	82
-+#define R_SPARC_GOTDATA_OP_LOX10	83
-+#define R_SPARC_GOTDATA_OP	84
-+#define R_SPARC_H34		85
-+#define R_SPARC_SIZE32		86
-+#define R_SPARC_SIZE64		87
-+#define R_SPARC_WDISP10		88
-+#define R_SPARC_JMP_IREL	248
-+#define R_SPARC_IRELATIVE	249
-+#define R_SPARC_GNU_VTINHERIT	250
-+#define R_SPARC_GNU_VTENTRY	251
-+#define R_SPARC_REV32		252
-+/* Keep this the last entry.  */
-+#define R_SPARC_NUM		253
-+
-+/* For Sparc64, legal values for d_tag of Elf64_Dyn.  */
-+
-+#define DT_SPARC_REGISTER 0x70000001
-+#define DT_SPARC_NUM	2
-+
-+/* MIPS R3000 specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_MIPS_NOREORDER   1		/* A .noreorder directive was used */
-+#define EF_MIPS_PIC	    2		/* Contains PIC code */
-+#define EF_MIPS_CPIC	    4		/* Uses PIC calling sequence */
-+#define EF_MIPS_XGOT	    8
-+#define EF_MIPS_64BIT_WHIRL 16
-+#define EF_MIPS_ABI2	    32
-+#define EF_MIPS_ABI_ON32    64
-+#define EF_MIPS_ARCH	    0xf0000000	/* MIPS architecture level */
-+
-+/* Legal values for MIPS architecture level.  */
-+
-+#define EF_MIPS_ARCH_1	    0x00000000	/* -mips1 code.  */
-+#define EF_MIPS_ARCH_2	    0x10000000	/* -mips2 code.  */
-+#define EF_MIPS_ARCH_3	    0x20000000	/* -mips3 code.  */
-+#define EF_MIPS_ARCH_4	    0x30000000	/* -mips4 code.  */
-+#define EF_MIPS_ARCH_5	    0x40000000	/* -mips5 code.  */
-+#define EF_MIPS_ARCH_32	    0x60000000	/* MIPS32 code.  */
-+#define EF_MIPS_ARCH_64	    0x70000000	/* MIPS64 code.  */
-+
-+/* The following are non-official names and should not be used.  */
-+
-+#define E_MIPS_ARCH_1	  0x00000000	/* -mips1 code.  */
-+#define E_MIPS_ARCH_2	  0x10000000	/* -mips2 code.  */
-+#define E_MIPS_ARCH_3	  0x20000000	/* -mips3 code.  */
-+#define E_MIPS_ARCH_4	  0x30000000	/* -mips4 code.  */
-+#define E_MIPS_ARCH_5	  0x40000000	/* -mips5 code.  */
-+#define E_MIPS_ARCH_32	  0x60000000	/* MIPS32 code.  */
-+#define E_MIPS_ARCH_64	  0x70000000	/* MIPS64 code.  */
-+
-+/* Special section indices.  */
-+
-+#define SHN_MIPS_ACOMMON    0xff00	/* Allocated common symbols */
-+#define SHN_MIPS_TEXT	    0xff01	/* Allocated test symbols.  */
-+#define SHN_MIPS_DATA	    0xff02	/* Allocated data symbols.  */
-+#define SHN_MIPS_SCOMMON    0xff03	/* Small common symbols */
-+#define SHN_MIPS_SUNDEFINED 0xff04	/* Small undefined symbols */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_MIPS_LIBLIST       0x70000000 /* Shared objects used in link */
-+#define SHT_MIPS_MSYM	       0x70000001
-+#define SHT_MIPS_CONFLICT      0x70000002 /* Conflicting symbols */
-+#define SHT_MIPS_GPTAB	       0x70000003 /* Global data area sizes */
-+#define SHT_MIPS_UCODE	       0x70000004 /* Reserved for SGI/MIPS compilers */
-+#define SHT_MIPS_DEBUG	       0x70000005 /* MIPS ECOFF debugging information*/
-+#define SHT_MIPS_REGINFO       0x70000006 /* Register usage information */
-+#define SHT_MIPS_PACKAGE       0x70000007
-+#define SHT_MIPS_PACKSYM       0x70000008
-+#define SHT_MIPS_RELD	       0x70000009
-+#define SHT_MIPS_IFACE         0x7000000b
-+#define SHT_MIPS_CONTENT       0x7000000c
-+#define SHT_MIPS_OPTIONS       0x7000000d /* Miscellaneous options.  */
-+#define SHT_MIPS_SHDR	       0x70000010
-+#define SHT_MIPS_FDESC	       0x70000011
-+#define SHT_MIPS_EXTSYM	       0x70000012
-+#define SHT_MIPS_DENSE	       0x70000013
-+#define SHT_MIPS_PDESC	       0x70000014
-+#define SHT_MIPS_LOCSYM	       0x70000015
-+#define SHT_MIPS_AUXSYM	       0x70000016
-+#define SHT_MIPS_OPTSYM	       0x70000017
-+#define SHT_MIPS_LOCSTR	       0x70000018
-+#define SHT_MIPS_LINE	       0x70000019
-+#define SHT_MIPS_RFDESC	       0x7000001a
-+#define SHT_MIPS_DELTASYM      0x7000001b
-+#define SHT_MIPS_DELTAINST     0x7000001c
-+#define SHT_MIPS_DELTACLASS    0x7000001d
-+#define SHT_MIPS_DWARF         0x7000001e /* DWARF debugging information.  */
-+#define SHT_MIPS_DELTADECL     0x7000001f
-+#define SHT_MIPS_SYMBOL_LIB    0x70000020
-+#define SHT_MIPS_EVENTS	       0x70000021 /* Event section.  */
-+#define SHT_MIPS_TRANSLATE     0x70000022
-+#define SHT_MIPS_PIXIE	       0x70000023
-+#define SHT_MIPS_XLATE	       0x70000024
-+#define SHT_MIPS_XLATE_DEBUG   0x70000025
-+#define SHT_MIPS_WHIRL	       0x70000026
-+#define SHT_MIPS_EH_REGION     0x70000027
-+#define SHT_MIPS_XLATE_OLD     0x70000028
-+#define SHT_MIPS_PDR_EXCEPTION 0x70000029
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_MIPS_GPREL	 0x10000000	/* Must be part of global data area */
-+#define SHF_MIPS_MERGE	 0x20000000
-+#define SHF_MIPS_ADDR	 0x40000000
-+#define SHF_MIPS_STRINGS 0x80000000
-+#define SHF_MIPS_NOSTRIP 0x08000000
-+#define SHF_MIPS_LOCAL	 0x04000000
-+#define SHF_MIPS_NAMES	 0x02000000
-+#define SHF_MIPS_NODUPE	 0x01000000
-+
-+
-+/* Symbol tables.  */
-+
-+/* MIPS specific values for `st_other'.  */
-+#define STO_MIPS_DEFAULT		0x0
-+#define STO_MIPS_INTERNAL		0x1
-+#define STO_MIPS_HIDDEN			0x2
-+#define STO_MIPS_PROTECTED		0x3
-+#define STO_MIPS_PLT			0x8
-+#define STO_MIPS_SC_ALIGN_UNUSED	0xff
-+
-+/* MIPS specific values for `st_info'.  */
-+#define STB_MIPS_SPLIT_COMMON		13
-+
-+/* Entries found in sections of type SHT_MIPS_GPTAB.  */
-+
-+typedef union
-+{
-+  struct
-+    {
-+      Elf32_Word gt_current_g_value;	/* -G value used for compilation */
-+      Elf32_Word gt_unused;		/* Not used */
-+    } gt_header;			/* First entry in section */
-+  struct
-+    {
-+      Elf32_Word gt_g_value;		/* If this value were used for -G */
-+      Elf32_Word gt_bytes;		/* This many bytes would be used */
-+    } gt_entry;				/* Subsequent entries in section */
-+} Elf32_gptab;
-+
-+/* Entry found in sections of type SHT_MIPS_REGINFO.  */
-+
-+typedef struct
-+{
-+  Elf32_Word	ri_gprmask;		/* General registers used */
-+  Elf32_Word	ri_cprmask[4];		/* Coprocessor registers used */
-+  Elf32_Sword	ri_gp_value;		/* $gp register value */
-+} Elf32_RegInfo;
-+
-+/* Entries found in sections of type SHT_MIPS_OPTIONS.  */
-+
-+typedef struct
-+{
-+  unsigned char kind;		/* Determines interpretation of the
-+				   variable part of descriptor.  */
-+  unsigned char size;		/* Size of descriptor, including header.  */
-+  Elf32_Section section;	/* Section header index of section affected,
-+				   0 for global options.  */
-+  Elf32_Word info;		/* Kind-specific information.  */
-+} Elf_Options;
-+
-+/* Values for `kind' field in Elf_Options.  */
-+
-+#define ODK_NULL	0	/* Undefined.  */
-+#define ODK_REGINFO	1	/* Register usage information.  */
-+#define ODK_EXCEPTIONS	2	/* Exception processing options.  */
-+#define ODK_PAD		3	/* Section padding options.  */
-+#define ODK_HWPATCH	4	/* Hardware workarounds performed */
-+#define ODK_FILL	5	/* record the fill value used by the linker. */
-+#define ODK_TAGS	6	/* reserve space for desktop tools to write. */
-+#define ODK_HWAND	7	/* HW workarounds.  'AND' bits when merging. */
-+#define ODK_HWOR	8	/* HW workarounds.  'OR' bits when merging.  */
-+
-+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries.  */
-+
-+#define OEX_FPU_MIN	0x1f	/* FPE's which MUST be enabled.  */
-+#define OEX_FPU_MAX	0x1f00	/* FPE's which MAY be enabled.  */
-+#define OEX_PAGE0	0x10000	/* page zero must be mapped.  */
-+#define OEX_SMM		0x20000	/* Force sequential memory mode?  */
-+#define OEX_FPDBUG	0x40000	/* Force floating point debug mode?  */
-+#define OEX_PRECISEFP	OEX_FPDBUG
-+#define OEX_DISMISS	0x80000	/* Dismiss invalid address faults?  */
-+
-+#define OEX_FPU_INVAL	0x10
-+#define OEX_FPU_DIV0	0x08
-+#define OEX_FPU_OFLO	0x04
-+#define OEX_FPU_UFLO	0x02
-+#define OEX_FPU_INEX	0x01
-+
-+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry.  */
-+
-+#define OHW_R4KEOP	0x1	/* R4000 end-of-page patch.  */
-+#define OHW_R8KPFETCH	0x2	/* may need R8000 prefetch patch.  */
-+#define OHW_R5KEOP	0x4	/* R5000 end-of-page patch.  */
-+#define OHW_R5KCVTL	0x8	/* R5000 cvt.[ds].l bug.  clean=1.  */
-+
-+#define OPAD_PREFIX	0x1
-+#define OPAD_POSTFIX	0x2
-+#define OPAD_SYMBOL	0x4
-+
-+/* Entry found in `.options' section.  */
-+
-+typedef struct
-+{
-+  Elf32_Word hwp_flags1;	/* Extra flags.  */
-+  Elf32_Word hwp_flags2;	/* Extra flags.  */
-+} Elf_Options_Hw;
-+
-+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries.  */
-+
-+#define OHWA0_R4KEOP_CHECKED	0x00000001
-+#define OHWA1_R4KEOP_CLEAN	0x00000002
-+
-+/* MIPS relocs.  */
-+
-+#define R_MIPS_NONE		0	/* No reloc */
-+#define R_MIPS_16		1	/* Direct 16 bit */
-+#define R_MIPS_32		2	/* Direct 32 bit */
-+#define R_MIPS_REL32		3	/* PC relative 32 bit */
-+#define R_MIPS_26		4	/* Direct 26 bit shifted */
-+#define R_MIPS_HI16		5	/* High 16 bit */
-+#define R_MIPS_LO16		6	/* Low 16 bit */
-+#define R_MIPS_GPREL16		7	/* GP relative 16 bit */
-+#define R_MIPS_LITERAL		8	/* 16 bit literal entry */
-+#define R_MIPS_GOT16		9	/* 16 bit GOT entry */
-+#define R_MIPS_PC16		10	/* PC relative 16 bit */
-+#define R_MIPS_CALL16		11	/* 16 bit GOT entry for function */
-+#define R_MIPS_GPREL32		12	/* GP relative 32 bit */
-+
-+#define R_MIPS_SHIFT5		16
-+#define R_MIPS_SHIFT6		17
-+#define R_MIPS_64		18
-+#define R_MIPS_GOT_DISP		19
-+#define R_MIPS_GOT_PAGE		20
-+#define R_MIPS_GOT_OFST		21
-+#define R_MIPS_GOT_HI16		22
-+#define R_MIPS_GOT_LO16		23
-+#define R_MIPS_SUB		24
-+#define R_MIPS_INSERT_A		25
-+#define R_MIPS_INSERT_B		26
-+#define R_MIPS_DELETE		27
-+#define R_MIPS_HIGHER		28
-+#define R_MIPS_HIGHEST		29
-+#define R_MIPS_CALL_HI16	30
-+#define R_MIPS_CALL_LO16	31
-+#define R_MIPS_SCN_DISP		32
-+#define R_MIPS_REL16		33
-+#define R_MIPS_ADD_IMMEDIATE	34
-+#define R_MIPS_PJUMP		35
-+#define R_MIPS_RELGOT		36
-+#define R_MIPS_JALR		37
-+#define R_MIPS_TLS_DTPMOD32	38	/* Module number 32 bit */
-+#define R_MIPS_TLS_DTPREL32	39	/* Module-relative offset 32 bit */
-+#define R_MIPS_TLS_DTPMOD64	40	/* Module number 64 bit */
-+#define R_MIPS_TLS_DTPREL64	41	/* Module-relative offset 64 bit */
-+#define R_MIPS_TLS_GD		42	/* 16 bit GOT offset for GD */
-+#define R_MIPS_TLS_LDM		43	/* 16 bit GOT offset for LDM */
-+#define R_MIPS_TLS_DTPREL_HI16	44	/* Module-relative offset, high 16 bits */
-+#define R_MIPS_TLS_DTPREL_LO16	45	/* Module-relative offset, low 16 bits */
-+#define R_MIPS_TLS_GOTTPREL	46	/* 16 bit GOT offset for IE */
-+#define R_MIPS_TLS_TPREL32	47	/* TP-relative offset, 32 bit */
-+#define R_MIPS_TLS_TPREL64	48	/* TP-relative offset, 64 bit */
-+#define R_MIPS_TLS_TPREL_HI16	49	/* TP-relative offset, high 16 bits */
-+#define R_MIPS_TLS_TPREL_LO16	50	/* TP-relative offset, low 16 bits */
-+#define R_MIPS_GLOB_DAT		51
-+#define R_MIPS_COPY		126
-+#define R_MIPS_JUMP_SLOT        127
-+/* Keep this the last entry.  */
-+#define R_MIPS_NUM		128
-+
-+/* Legal values for p_type field of Elf32_Phdr.  */
-+
-+#define PT_MIPS_REGINFO	0x70000000	/* Register usage information */
-+#define PT_MIPS_RTPROC  0x70000001	/* Runtime procedure table. */
-+#define PT_MIPS_OPTIONS 0x70000002
-+
-+/* Special program header types.  */
-+
-+#define PF_MIPS_LOCAL	0x10000000
-+
-+/* Legal values for d_tag field of Elf32_Dyn.  */
-+
-+#define DT_MIPS_RLD_VERSION  0x70000001	/* Runtime linker interface version */
-+#define DT_MIPS_TIME_STAMP   0x70000002	/* Timestamp */
-+#define DT_MIPS_ICHECKSUM    0x70000003	/* Checksum */
-+#define DT_MIPS_IVERSION     0x70000004	/* Version string (string tbl index) */
-+#define DT_MIPS_FLAGS	     0x70000005	/* Flags */
-+#define DT_MIPS_BASE_ADDRESS 0x70000006	/* Base address */
-+#define DT_MIPS_MSYM	     0x70000007
-+#define DT_MIPS_CONFLICT     0x70000008	/* Address of CONFLICT section */
-+#define DT_MIPS_LIBLIST	     0x70000009	/* Address of LIBLIST section */
-+#define DT_MIPS_LOCAL_GOTNO  0x7000000a	/* Number of local GOT entries */
-+#define DT_MIPS_CONFLICTNO   0x7000000b	/* Number of CONFLICT entries */
-+#define DT_MIPS_LIBLISTNO    0x70000010	/* Number of LIBLIST entries */
-+#define DT_MIPS_SYMTABNO     0x70000011	/* Number of DYNSYM entries */
-+#define DT_MIPS_UNREFEXTNO   0x70000012	/* First external DYNSYM */
-+#define DT_MIPS_GOTSYM	     0x70000013	/* First GOT entry in DYNSYM */
-+#define DT_MIPS_HIPAGENO     0x70000014	/* Number of GOT page table entries */
-+#define DT_MIPS_RLD_MAP	     0x70000016	/* Address of run time loader map.  */
-+#define DT_MIPS_DELTA_CLASS  0x70000017	/* Delta C++ class definition.  */
-+#define DT_MIPS_DELTA_CLASS_NO    0x70000018 /* Number of entries in
-+						DT_MIPS_DELTA_CLASS.  */
-+#define DT_MIPS_DELTA_INSTANCE    0x70000019 /* Delta C++ class instances.  */
-+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
-+						DT_MIPS_DELTA_INSTANCE.  */
-+#define DT_MIPS_DELTA_RELOC  0x7000001b /* Delta relocations.  */
-+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
-+					     DT_MIPS_DELTA_RELOC.  */
-+#define DT_MIPS_DELTA_SYM    0x7000001d /* Delta symbols that Delta
-+					   relocations refer to.  */
-+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
-+					   DT_MIPS_DELTA_SYM.  */
-+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
-+					     class declaration.  */
-+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
-+						DT_MIPS_DELTA_CLASSSYM.  */
-+#define DT_MIPS_CXX_FLAGS    0x70000022 /* Flags indicating for C++ flavor.  */
-+#define DT_MIPS_PIXIE_INIT   0x70000023
-+#define DT_MIPS_SYMBOL_LIB   0x70000024
-+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
-+#define DT_MIPS_LOCAL_GOTIDX 0x70000026
-+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
-+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
-+#define DT_MIPS_OPTIONS	     0x70000029 /* Address of .options.  */
-+#define DT_MIPS_INTERFACE    0x7000002a /* Address of .interface.  */
-+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
-+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
-+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
-+						    function stored in GOT.  */
-+#define DT_MIPS_PERF_SUFFIX  0x7000002e /* Default suffix of dso to be added
-+					   by rld on dlopen() calls.  */
-+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
-+#define DT_MIPS_GP_VALUE     0x70000030 /* GP value for aux GOTs.  */
-+#define DT_MIPS_AUX_DYNAMIC  0x70000031 /* Address of aux .dynamic.  */
-+/* The address of .got.plt in an executable using the new non-PIC ABI.  */
-+#define DT_MIPS_PLTGOT	     0x70000032
-+/* The base of the PLT in an executable using the new non-PIC ABI if that
-+   PLT is writable.  For a non-writable PLT, this is omitted or has a zero
-+   value.  */
-+#define DT_MIPS_RWPLT        0x70000034
-+#define DT_MIPS_NUM	     0x35
-+
-+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry.  */
-+
-+#define RHF_NONE		   0		/* No flags */
-+#define RHF_QUICKSTART		   (1 << 0)	/* Use quickstart */
-+#define RHF_NOTPOT		   (1 << 1)	/* Hash size not power of 2 */
-+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2)	/* Ignore LD_LIBRARY_PATH */
-+#define RHF_NO_MOVE		   (1 << 3)
-+#define RHF_SGI_ONLY		   (1 << 4)
-+#define RHF_GUARANTEE_INIT	   (1 << 5)
-+#define RHF_DELTA_C_PLUS_PLUS	   (1 << 6)
-+#define RHF_GUARANTEE_START_INIT   (1 << 7)
-+#define RHF_PIXIE		   (1 << 8)
-+#define RHF_DEFAULT_DELAY_LOAD	   (1 << 9)
-+#define RHF_REQUICKSTART	   (1 << 10)
-+#define RHF_REQUICKSTARTED	   (1 << 11)
-+#define RHF_CORD		   (1 << 12)
-+#define RHF_NO_UNRES_UNDEF	   (1 << 13)
-+#define RHF_RLD_ORDER_SAFE	   (1 << 14)
-+
-+/* Entries found in sections of type SHT_MIPS_LIBLIST.  */
-+
-+typedef struct
-+{
-+  Elf32_Word l_name;		/* Name (string table index) */
-+  Elf32_Word l_time_stamp;	/* Timestamp */
-+  Elf32_Word l_checksum;	/* Checksum */
-+  Elf32_Word l_version;		/* Interface version */
-+  Elf32_Word l_flags;		/* Flags */
-+} Elf32_Lib;
-+
-+typedef struct
-+{
-+  Elf64_Word l_name;		/* Name (string table index) */
-+  Elf64_Word l_time_stamp;	/* Timestamp */
-+  Elf64_Word l_checksum;	/* Checksum */
-+  Elf64_Word l_version;		/* Interface version */
-+  Elf64_Word l_flags;		/* Flags */
-+} Elf64_Lib;
-+
-+
-+/* Legal values for l_flags.  */
-+
-+#define LL_NONE		  0
-+#define LL_EXACT_MATCH	  (1 << 0)	/* Require exact match */
-+#define LL_IGNORE_INT_VER (1 << 1)	/* Ignore interface version */
-+#define LL_REQUIRE_MINOR  (1 << 2)
-+#define LL_EXPORTS	  (1 << 3)
-+#define LL_DELAY_LOAD	  (1 << 4)
-+#define LL_DELTA	  (1 << 5)
-+
-+/* Entries found in sections of type SHT_MIPS_CONFLICT.  */
-+
-+typedef Elf32_Addr Elf32_Conflict;
-+
-+
-+/* HPPA specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr.  */
-+
-+#define EF_PARISC_TRAPNIL	0x00010000 /* Trap nil pointer dereference.  */
-+#define EF_PARISC_EXT		0x00020000 /* Program uses arch. extensions. */
-+#define EF_PARISC_LSB		0x00040000 /* Program expects little endian. */
-+#define EF_PARISC_WIDE		0x00080000 /* Program expects wide mode.  */
-+#define EF_PARISC_NO_KABP	0x00100000 /* No kernel assisted branch
-+					      prediction.  */
-+#define EF_PARISC_LAZYSWAP	0x00400000 /* Allow lazy swapping.  */
-+#define EF_PARISC_ARCH		0x0000ffff /* Architecture version.  */
-+
-+/* Defined values for `e_flags & EF_PARISC_ARCH' are:  */
-+
-+#define EFA_PARISC_1_0		    0x020b /* PA-RISC 1.0 big-endian.  */
-+#define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
-+#define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
-+
-+/* Additional section indeces.  */
-+
-+#define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
-+					      symbols in ANSI C.  */
-+#define SHN_PARISC_HUGE_COMMON	0xff01	   /* Common blocks in huge model.  */
-+
-+/* Legal values for sh_type field of Elf32_Shdr.  */
-+
-+#define SHT_PARISC_EXT		0x70000000 /* Contains product specific ext. */
-+#define SHT_PARISC_UNWIND	0x70000001 /* Unwind information.  */
-+#define SHT_PARISC_DOC		0x70000002 /* Debug info for optimized code. */
-+
-+/* Legal values for sh_flags field of Elf32_Shdr.  */
-+
-+#define SHF_PARISC_SHORT	0x20000000 /* Section with short addressing. */
-+#define SHF_PARISC_HUGE		0x40000000 /* Section far from gp.  */
-+#define SHF_PARISC_SBP		0x80000000 /* Static branch prediction code. */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
-+
-+#define STT_PARISC_MILLICODE	13	/* Millicode function entry point.  */
-+
-+#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
-+#define STT_HP_STUB		(STT_LOOS + 0x2)
-+
-+/* HPPA relocs.  */
-+
-+#define R_PARISC_NONE		0	/* No reloc.  */
-+#define R_PARISC_DIR32		1	/* Direct 32-bit reference.  */
-+#define R_PARISC_DIR21L		2	/* Left 21 bits of eff. address.  */
-+#define R_PARISC_DIR17R		3	/* Right 17 bits of eff. address.  */
-+#define R_PARISC_DIR17F		4	/* 17 bits of eff. address.  */
-+#define R_PARISC_DIR14R		6	/* Right 14 bits of eff. address.  */
-+#define R_PARISC_PCREL32	9	/* 32-bit rel. address.  */
-+#define R_PARISC_PCREL21L	10	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_PCREL17R	11	/* Right 17 bits of rel. address.  */
-+#define R_PARISC_PCREL17F	12	/* 17 bits of rel. address.  */
-+#define R_PARISC_PCREL14R	14	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_DPREL21L	18	/* Left 21 bits of rel. address.  */
-+#define R_PARISC_DPREL14R	22	/* Right 14 bits of rel. address.  */
-+#define R_PARISC_GPREL21L	26	/* GP-relative, left 21 bits.  */
-+#define R_PARISC_GPREL14R	30	/* GP-relative, right 14 bits.  */
-+#define R_PARISC_LTOFF21L	34	/* LT-relative, left 21 bits.  */
-+#define R_PARISC_LTOFF14R	38	/* LT-relative, right 14 bits.  */
-+#define R_PARISC_SECREL32	41	/* 32 bits section rel. address.  */
-+#define R_PARISC_SEGBASE	48	/* No relocation, set segment base.  */
-+#define R_PARISC_SEGREL32	49	/* 32 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF21L	50	/* PLT rel. address, left 21 bits.  */
-+#define R_PARISC_PLTOFF14R	54	/* PLT rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_FPTR32	57	/* 32 bits LT-rel. function pointer. */
-+#define R_PARISC_LTOFF_FPTR21L	58	/* LT-rel. fct ptr, left 21 bits. */
-+#define R_PARISC_LTOFF_FPTR14R	62	/* LT-rel. fct ptr, right 14 bits. */
-+#define R_PARISC_FPTR64		64	/* 64 bits function address.  */
-+#define R_PARISC_PLABEL32	65	/* 32 bits function address.  */
-+#define R_PARISC_PLABEL21L	66	/* Left 21 bits of fdesc address.  */
-+#define R_PARISC_PLABEL14R	70	/* Right 14 bits of fdesc address.  */
-+#define R_PARISC_PCREL64	72	/* 64 bits PC-rel. address.  */
-+#define R_PARISC_PCREL22F	74	/* 22 bits PC-rel. address.  */
-+#define R_PARISC_PCREL14WR	75	/* PC-rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL14DR	76	/* PC rel. address, right 14 bits.  */
-+#define R_PARISC_PCREL16F	77	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16WF	78	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_PCREL16DF	79	/* 16 bits PC-rel. address.  */
-+#define R_PARISC_DIR64		80	/* 64 bits of eff. address.  */
-+#define R_PARISC_DIR14WR	83	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR14DR	84	/* 14 bits of eff. address.  */
-+#define R_PARISC_DIR16F		85	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16WF	86	/* 16 bits of eff. address.  */
-+#define R_PARISC_DIR16DF	87	/* 16 bits of eff. address.  */
-+#define R_PARISC_GPREL64	88	/* 64 bits of GP-rel. address.  */
-+#define R_PARISC_GPREL14WR	91	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL14DR	92	/* GP-rel. address, right 14 bits.  */
-+#define R_PARISC_GPREL16F	93	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16WF	94	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_GPREL16DF	95	/* 16 bits GP-rel. address.  */
-+#define R_PARISC_LTOFF64	96	/* 64 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF14WR	99	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF14DR	100	/* LT-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF16F	101	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16WF	102	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_LTOFF16DF	103	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_SECREL64	104	/* 64 bits section rel. address.  */
-+#define R_PARISC_SEGREL64	112	/* 64 bits segment rel. address.  */
-+#define R_PARISC_PLTOFF14WR	115	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF14DR	116	/* PLT-rel. address, right 14 bits.  */
-+#define R_PARISC_PLTOFF16F	117	/* 16 bits LT-rel. address.  */
-+#define R_PARISC_PLTOFF16WF	118	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_PLTOFF16DF	119	/* 16 bits PLT-rel. address.  */
-+#define R_PARISC_LTOFF_FPTR64	120	/* 64 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR14WR	123	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR14DR	124	/* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR16F	125	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16WF	126	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LTOFF_FPTR16DF	127	/* 16 bits LT-rel. function ptr.  */
-+#define R_PARISC_LORESERVE	128
-+#define R_PARISC_COPY		128	/* Copy relocation.  */
-+#define R_PARISC_IPLT		129	/* Dynamic reloc, imported PLT */
-+#define R_PARISC_EPLT		130	/* Dynamic reloc, exported PLT */
-+#define R_PARISC_TPREL32	153	/* 32 bits TP-rel. address.  */
-+#define R_PARISC_TPREL21L	154	/* TP-rel. address, left 21 bits.  */
-+#define R_PARISC_TPREL14R	158	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_LTOFF_TP21L	162	/* LT-TP-rel. address, left 21 bits. */
-+#define R_PARISC_LTOFF_TP14R	166	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14F	167	/* 14 bits LT-TP-rel. address.  */
-+#define R_PARISC_TPREL64	216	/* 64 bits TP-rel. address.  */
-+#define R_PARISC_TPREL14WR	219	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL14DR	220	/* TP-rel. address, right 14 bits.  */
-+#define R_PARISC_TPREL16F	221	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16WF	222	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_TPREL16DF	223	/* 16 bits TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP64	224	/* 64 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP14WR	227	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14DR	228	/* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP16F	229	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16WF	230	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_LTOFF_TP16DF	231	/* 16 bits LT-TP-rel. address.  */
-+#define R_PARISC_GNU_VTENTRY	232
-+#define R_PARISC_GNU_VTINHERIT	233
-+#define R_PARISC_TLS_GD21L	234	/* GD 21-bit left.  */
-+#define R_PARISC_TLS_GD14R	235	/* GD 14-bit right.  */
-+#define R_PARISC_TLS_GDCALL	236	/* GD call to __t_g_a.  */
-+#define R_PARISC_TLS_LDM21L	237	/* LD module 21-bit left.  */
-+#define R_PARISC_TLS_LDM14R	238	/* LD module 14-bit right.  */
-+#define R_PARISC_TLS_LDMCALL	239	/* LD module call to __t_g_a.  */
-+#define R_PARISC_TLS_LDO21L	240	/* LD offset 21-bit left.  */
-+#define R_PARISC_TLS_LDO14R	241	/* LD offset 14-bit right.  */
-+#define R_PARISC_TLS_DTPMOD32	242	/* DTP module 32-bit.  */
-+#define R_PARISC_TLS_DTPMOD64	243	/* DTP module 64-bit.  */
-+#define R_PARISC_TLS_DTPOFF32	244	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_DTPOFF64	245	/* DTP offset 32-bit.  */
-+#define R_PARISC_TLS_LE21L	R_PARISC_TPREL21L
-+#define R_PARISC_TLS_LE14R	R_PARISC_TPREL14R
-+#define R_PARISC_TLS_IE21L	R_PARISC_LTOFF_TP21L
-+#define R_PARISC_TLS_IE14R	R_PARISC_LTOFF_TP14R
-+#define R_PARISC_TLS_TPREL32	R_PARISC_TPREL32
-+#define R_PARISC_TLS_TPREL64	R_PARISC_TPREL64
-+#define R_PARISC_HIRESERVE	255
-+
-+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PT_HP_TLS		(PT_LOOS + 0x0)
-+#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
-+#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
-+#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
-+#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
-+#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
-+#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
-+#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
-+#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
-+#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
-+#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
-+#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
-+#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
-+#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
-+#define PT_HP_STACK		(PT_LOOS + 0x14)
-+
-+#define PT_PARISC_ARCHEXT	0x70000000
-+#define PT_PARISC_UNWIND	0x70000001
-+
-+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr.  */
-+
-+#define PF_PARISC_SBP		0x08000000
-+
-+#define PF_HP_PAGE_SIZE		0x00100000
-+#define PF_HP_FAR_SHARED	0x00200000
-+#define PF_HP_NEAR_SHARED	0x00400000
-+#define PF_HP_CODE		0x01000000
-+#define PF_HP_MODIFY		0x02000000
-+#define PF_HP_LAZYSWAP		0x04000000
-+#define PF_HP_SBP		0x08000000
-+
-+
-+/* Alpha specific definitions.  */
-+
-+/* Legal values for e_flags field of Elf64_Ehdr.  */
-+
-+#define EF_ALPHA_32BIT		1	/* All addresses must be < 2GB.  */
-+#define EF_ALPHA_CANRELAX	2	/* Relocations for relaxing exist.  */
-+
-+/* Legal values for sh_type field of Elf64_Shdr.  */
-+
-+/* These two are primerily concerned with ECOFF debugging info.  */
-+#define SHT_ALPHA_DEBUG		0x70000001
-+#define SHT_ALPHA_REGINFO	0x70000002
-+
-+/* Legal values for sh_flags field of Elf64_Shdr.  */
-+
-+#define SHF_ALPHA_GPREL		0x10000000
-+
-+/* Legal values for st_other field of Elf64_Sym.  */
-+#define STO_ALPHA_NOPV		0x80	/* No PV required.  */
-+#define STO_ALPHA_STD_GPLOAD	0x88	/* PV only used for initial ldgp.  */
-+
-+/* Alpha relocs.  */
-+
-+#define R_ALPHA_NONE		0	/* No reloc */
-+#define R_ALPHA_REFLONG		1	/* Direct 32 bit */
-+#define R_ALPHA_REFQUAD		2	/* Direct 64 bit */
-+#define R_ALPHA_GPREL32		3	/* GP relative 32 bit */
-+#define R_ALPHA_LITERAL		4	/* GP relative 16 bit w/optimization */
-+#define R_ALPHA_LITUSE		5	/* Optimization hint for LITERAL */
-+#define R_ALPHA_GPDISP		6	/* Add displacement to GP */
-+#define R_ALPHA_BRADDR		7	/* PC+4 relative 23 bit shifted */
-+#define R_ALPHA_HINT		8	/* PC+4 relative 16 bit shifted */
-+#define R_ALPHA_SREL16		9	/* PC relative 16 bit */
-+#define R_ALPHA_SREL32		10	/* PC relative 32 bit */
-+#define R_ALPHA_SREL64		11	/* PC relative 64 bit */
-+#define R_ALPHA_GPRELHIGH	17	/* GP relative 32 bit, high 16 bits */
-+#define R_ALPHA_GPRELLOW	18	/* GP relative 32 bit, low 16 bits */
-+#define R_ALPHA_GPREL16		19	/* GP relative 16 bit */
-+#define R_ALPHA_COPY		24	/* Copy symbol at runtime */
-+#define R_ALPHA_GLOB_DAT	25	/* Create GOT entry */
-+#define R_ALPHA_JMP_SLOT	26	/* Create PLT entry */
-+#define R_ALPHA_RELATIVE	27	/* Adjust by program base */
-+#define R_ALPHA_TLS_GD_HI	28
-+#define R_ALPHA_TLSGD		29
-+#define R_ALPHA_TLS_LDM		30
-+#define R_ALPHA_DTPMOD64	31
-+#define R_ALPHA_GOTDTPREL	32
-+#define R_ALPHA_DTPREL64	33
-+#define R_ALPHA_DTPRELHI	34
-+#define R_ALPHA_DTPRELLO	35
-+#define R_ALPHA_DTPREL16	36
-+#define R_ALPHA_GOTTPREL	37
-+#define R_ALPHA_TPREL64		38
-+#define R_ALPHA_TPRELHI		39
-+#define R_ALPHA_TPRELLO		40
-+#define R_ALPHA_TPREL16		41
-+/* Keep this the last entry.  */
-+#define R_ALPHA_NUM		46
-+
-+/* Magic values of the LITUSE relocation addend.  */
-+#define LITUSE_ALPHA_ADDR	0
-+#define LITUSE_ALPHA_BASE	1
-+#define LITUSE_ALPHA_BYTOFF	2
-+#define LITUSE_ALPHA_JSR	3
-+#define LITUSE_ALPHA_TLS_GD	4
-+#define LITUSE_ALPHA_TLS_LDM	5
-+
-+/* Legal values for d_tag of Elf64_Dyn.  */
-+#define DT_ALPHA_PLTRO		(DT_LOPROC + 0)
-+#define DT_ALPHA_NUM		1
-+
-+/* PowerPC specific declarations */
-+
-+/* Values for Elf32/64_Ehdr.e_flags.  */
-+#define EF_PPC_EMB		0x80000000	/* PowerPC embedded flag */
-+
-+/* Cygnus local bits below */
-+#define EF_PPC_RELOCATABLE	0x00010000	/* PowerPC -mrelocatable flag*/
-+#define EF_PPC_RELOCATABLE_LIB	0x00008000	/* PowerPC -mrelocatable-lib
-+						   flag */
-+
-+/* PowerPC relocations defined by the ABIs */
-+#define R_PPC_NONE		0
-+#define R_PPC_ADDR32		1	/* 32bit absolute address */
-+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
-+#define R_PPC_ADDR16		3	/* 16bit absolute address */
-+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
-+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
-+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
-+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
-+#define R_PPC_ADDR14_BRTAKEN	8
-+#define R_PPC_ADDR14_BRNTAKEN	9
-+#define R_PPC_REL24		10	/* PC relative 26 bit */
-+#define R_PPC_REL14		11	/* PC relative 16 bit */
-+#define R_PPC_REL14_BRTAKEN	12
-+#define R_PPC_REL14_BRNTAKEN	13
-+#define R_PPC_GOT16		14
-+#define R_PPC_GOT16_LO		15
-+#define R_PPC_GOT16_HI		16
-+#define R_PPC_GOT16_HA		17
-+#define R_PPC_PLTREL24		18
-+#define R_PPC_COPY		19
-+#define R_PPC_GLOB_DAT		20
-+#define R_PPC_JMP_SLOT		21
-+#define R_PPC_RELATIVE		22
-+#define R_PPC_LOCAL24PC		23
-+#define R_PPC_UADDR32		24
-+#define R_PPC_UADDR16		25
-+#define R_PPC_REL32		26
-+#define R_PPC_PLT32		27
-+#define R_PPC_PLTREL32		28
-+#define R_PPC_PLT16_LO		29
-+#define R_PPC_PLT16_HI		30
-+#define R_PPC_PLT16_HA		31
-+#define R_PPC_SDAREL16		32
-+#define R_PPC_SECTOFF		33
-+#define R_PPC_SECTOFF_LO	34
-+#define R_PPC_SECTOFF_HI	35
-+#define R_PPC_SECTOFF_HA	36
-+
-+/* PowerPC relocations defined for the TLS access ABI.  */
-+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
-+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
-+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
-+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
-+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
-+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
-+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
-+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
-+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
-+
-+/* The remaining relocs are from the Embedded ELF ABI, and are not
-+   in the SVR4 ELF ABI.  */
-+#define R_PPC_EMB_NADDR32	101
-+#define R_PPC_EMB_NADDR16	102
-+#define R_PPC_EMB_NADDR16_LO	103
-+#define R_PPC_EMB_NADDR16_HI	104
-+#define R_PPC_EMB_NADDR16_HA	105
-+#define R_PPC_EMB_SDAI16	106
-+#define R_PPC_EMB_SDA2I16	107
-+#define R_PPC_EMB_SDA2REL	108
-+#define R_PPC_EMB_SDA21		109	/* 16 bit offset in SDA */
-+#define R_PPC_EMB_MRKREF	110
-+#define R_PPC_EMB_RELSEC16	111
-+#define R_PPC_EMB_RELST_LO	112
-+#define R_PPC_EMB_RELST_HI	113
-+#define R_PPC_EMB_RELST_HA	114
-+#define R_PPC_EMB_BIT_FLD	115
-+#define R_PPC_EMB_RELSDA	116	/* 16 bit relative offset in SDA */
-+
-+/* Diab tool relocations.  */
-+#define R_PPC_DIAB_SDA21_LO	180	/* like EMB_SDA21, but lower 16 bit */
-+#define R_PPC_DIAB_SDA21_HI	181	/* like EMB_SDA21, but high 16 bit */
-+#define R_PPC_DIAB_SDA21_HA	182	/* like EMB_SDA21, adjusted high 16 */
-+#define R_PPC_DIAB_RELSDA_LO	183	/* like EMB_RELSDA, but lower 16 bit */
-+#define R_PPC_DIAB_RELSDA_HI	184	/* like EMB_RELSDA, but high 16 bit */
-+#define R_PPC_DIAB_RELSDA_HA	185	/* like EMB_RELSDA, adjusted high 16 */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC_IRELATIVE		248
-+
-+/* GNU relocs used in PIC code sequences.  */
-+#define R_PPC_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC_REL16_LO		250	/* half16   (sym+add-.)@l */
-+#define R_PPC_REL16_HI		251	/* half16   (sym+add-.)@h */
-+#define R_PPC_REL16_HA		252	/* half16   (sym+add-.)@ha */
-+
-+/* This is a phony reloc to handle any old fashioned TOC16 references
-+   that may still be in object files.  */
-+#define R_PPC_TOC16		255
-+
-+/* PowerPC specific values for the Dyn d_tag field.  */
-+#define DT_PPC_GOT		(DT_LOPROC + 0)
-+#define DT_PPC_NUM		1
-+
-+/* PowerPC64 relocations defined by the ABIs */
-+#define R_PPC64_NONE		R_PPC_NONE
-+#define R_PPC64_ADDR32		R_PPC_ADDR32 /* 32bit absolute address */
-+#define R_PPC64_ADDR24		R_PPC_ADDR24 /* 26bit address, word aligned */
-+#define R_PPC64_ADDR16		R_PPC_ADDR16 /* 16bit absolute address */
-+#define R_PPC64_ADDR16_LO	R_PPC_ADDR16_LO	/* lower 16bits of address */
-+#define R_PPC64_ADDR16_HI	R_PPC_ADDR16_HI	/* high 16bits of address. */
-+#define R_PPC64_ADDR16_HA	R_PPC_ADDR16_HA /* adjusted high 16bits.  */
-+#define R_PPC64_ADDR14		R_PPC_ADDR14 /* 16bit address, word aligned */
-+#define R_PPC64_ADDR14_BRTAKEN	R_PPC_ADDR14_BRTAKEN
-+#define R_PPC64_ADDR14_BRNTAKEN	R_PPC_ADDR14_BRNTAKEN
-+#define R_PPC64_REL24		R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
-+#define R_PPC64_REL14		R_PPC_REL14 /* PC relative 16 bit */
-+#define R_PPC64_REL14_BRTAKEN	R_PPC_REL14_BRTAKEN
-+#define R_PPC64_REL14_BRNTAKEN	R_PPC_REL14_BRNTAKEN
-+#define R_PPC64_GOT16		R_PPC_GOT16
-+#define R_PPC64_GOT16_LO	R_PPC_GOT16_LO
-+#define R_PPC64_GOT16_HI	R_PPC_GOT16_HI
-+#define R_PPC64_GOT16_HA	R_PPC_GOT16_HA
-+
-+#define R_PPC64_COPY		R_PPC_COPY
-+#define R_PPC64_GLOB_DAT	R_PPC_GLOB_DAT
-+#define R_PPC64_JMP_SLOT	R_PPC_JMP_SLOT
-+#define R_PPC64_RELATIVE	R_PPC_RELATIVE
-+
-+#define R_PPC64_UADDR32		R_PPC_UADDR32
-+#define R_PPC64_UADDR16		R_PPC_UADDR16
-+#define R_PPC64_REL32		R_PPC_REL32
-+#define R_PPC64_PLT32		R_PPC_PLT32
-+#define R_PPC64_PLTREL32	R_PPC_PLTREL32
-+#define R_PPC64_PLT16_LO	R_PPC_PLT16_LO
-+#define R_PPC64_PLT16_HI	R_PPC_PLT16_HI
-+#define R_PPC64_PLT16_HA	R_PPC_PLT16_HA
-+
-+#define R_PPC64_SECTOFF		R_PPC_SECTOFF
-+#define R_PPC64_SECTOFF_LO	R_PPC_SECTOFF_LO
-+#define R_PPC64_SECTOFF_HI	R_PPC_SECTOFF_HI
-+#define R_PPC64_SECTOFF_HA	R_PPC_SECTOFF_HA
-+#define R_PPC64_ADDR30		37 /* word30 (S + A - P) >> 2 */
-+#define R_PPC64_ADDR64		38 /* doubleword64 S + A */
-+#define R_PPC64_ADDR16_HIGHER	39 /* half16 #higher(S + A) */
-+#define R_PPC64_ADDR16_HIGHERA	40 /* half16 #highera(S + A) */
-+#define R_PPC64_ADDR16_HIGHEST	41 /* half16 #highest(S + A) */
-+#define R_PPC64_ADDR16_HIGHESTA	42 /* half16 #highesta(S + A) */
-+#define R_PPC64_UADDR64		43 /* doubleword64 S + A */
-+#define R_PPC64_REL64		44 /* doubleword64 S + A - P */
-+#define R_PPC64_PLT64		45 /* doubleword64 L + A */
-+#define R_PPC64_PLTREL64	46 /* doubleword64 L + A - P */
-+#define R_PPC64_TOC16		47 /* half16* S + A - .TOC */
-+#define R_PPC64_TOC16_LO	48 /* half16 #lo(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HI	49 /* half16 #hi(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HA	50 /* half16 #ha(S + A - .TOC.) */
-+#define R_PPC64_TOC		51 /* doubleword64 .TOC */
-+#define R_PPC64_PLTGOT16	52 /* half16* M + A */
-+#define R_PPC64_PLTGOT16_LO	53 /* half16 #lo(M + A) */
-+#define R_PPC64_PLTGOT16_HI	54 /* half16 #hi(M + A) */
-+#define R_PPC64_PLTGOT16_HA	55 /* half16 #ha(M + A) */
-+
-+#define R_PPC64_ADDR16_DS	56 /* half16ds* (S + A) >> 2 */
-+#define R_PPC64_ADDR16_LO_DS	57 /* half16ds  #lo(S + A) >> 2 */
-+#define R_PPC64_GOT16_DS	58 /* half16ds* (G + A) >> 2 */
-+#define R_PPC64_GOT16_LO_DS	59 /* half16ds  #lo(G + A) >> 2 */
-+#define R_PPC64_PLT16_LO_DS	60 /* half16ds  #lo(L + A) >> 2 */
-+#define R_PPC64_SECTOFF_DS	61 /* half16ds* (R + A) >> 2 */
-+#define R_PPC64_SECTOFF_LO_DS	62 /* half16ds  #lo(R + A) >> 2 */
-+#define R_PPC64_TOC16_DS	63 /* half16ds* (S + A - .TOC.) >> 2 */
-+#define R_PPC64_TOC16_LO_DS	64 /* half16ds  #lo(S + A - .TOC.) >> 2 */
-+#define R_PPC64_PLTGOT16_DS	65 /* half16ds* (M + A) >> 2 */
-+#define R_PPC64_PLTGOT16_LO_DS	66 /* half16ds  #lo(M + A) >> 2 */
-+
-+/* PowerPC64 relocations defined for the TLS access ABI.  */
-+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
-+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
-+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
-+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
-+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
-+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
-+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
-+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
-+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
-+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
-+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
-+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
-+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
-+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
-+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
-+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
-+
-+/* GNU extension to support local ifunc.  */
-+#define R_PPC64_JMP_IREL	247
-+#define R_PPC64_IRELATIVE	248
-+#define R_PPC64_REL16		249	/* half16   (sym+add-.) */
-+#define R_PPC64_REL16_LO	250	/* half16   (sym+add-.)@l */
-+#define R_PPC64_REL16_HI	251	/* half16   (sym+add-.)@h */
-+#define R_PPC64_REL16_HA	252	/* half16   (sym+add-.)@ha */
-+
-+/* PowerPC64 specific values for the Dyn d_tag field.  */
-+#define DT_PPC64_GLINK  (DT_LOPROC + 0)
-+#define DT_PPC64_OPD	(DT_LOPROC + 1)
-+#define DT_PPC64_OPDSZ	(DT_LOPROC + 2)
-+#define DT_PPC64_NUM    3
-+
-+
-+/* ARM specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_ARM_RELEXEC		0x01
-+#define EF_ARM_HASENTRY		0x02
-+#define EF_ARM_INTERWORK	0x04
-+#define EF_ARM_APCS_26		0x08
-+#define EF_ARM_APCS_FLOAT	0x10
-+#define EF_ARM_PIC		0x20
-+#define EF_ARM_ALIGN8		0x40 /* 8-bit structure alignment is in use */
-+#define EF_ARM_NEW_ABI		0x80
-+#define EF_ARM_OLD_ABI		0x100
-+#define EF_ARM_SOFT_FLOAT	0x200
-+#define EF_ARM_VFP_FLOAT	0x400
-+#define EF_ARM_MAVERICK_FLOAT	0x800
-+
-+
-+/* Other constants defined in the ARM ELF spec. version B-01.  */
-+/* NB. These conflict with values defined above.  */
-+#define EF_ARM_SYMSARESORTED	0x04
-+#define EF_ARM_DYNSYMSUSESEGIDX	0x08
-+#define EF_ARM_MAPSYMSFIRST	0x10
-+#define EF_ARM_EABIMASK		0XFF000000
-+
-+/* Constants defined in AAELF.  */
-+#define EF_ARM_BE8	    0x00800000
-+#define EF_ARM_LE8	    0x00400000
-+
-+#define EF_ARM_EABI_VERSION(flags)	((flags) & EF_ARM_EABIMASK)
-+#define EF_ARM_EABI_UNKNOWN	0x00000000
-+#define EF_ARM_EABI_VER1	0x01000000
-+#define EF_ARM_EABI_VER2	0x02000000
-+#define EF_ARM_EABI_VER3	0x03000000
-+#define EF_ARM_EABI_VER4	0x04000000
-+#define EF_ARM_EABI_VER5	0x05000000
-+
-+/* Additional symbol types for Thumb.  */
-+#define STT_ARM_TFUNC		STT_LOPROC /* A Thumb function.  */
-+#define STT_ARM_16BIT		STT_HIPROC /* A Thumb label.  */
-+
-+/* ARM-specific values for sh_flags */
-+#define SHF_ARM_ENTRYSECT	0x10000000 /* Section contains an entry point */
-+#define SHF_ARM_COMDEF		0x80000000 /* Section may be multiply defined
-+					      in the input to a link step.  */
-+
-+/* ARM-specific program header flags */
-+#define PF_ARM_SB		0x10000000 /* Segment contains the location
-+					      addressed by the static base. */
-+#define PF_ARM_PI		0x20000000 /* Position-independent segment.  */
-+#define PF_ARM_ABS		0x40000000 /* Absolute segment.  */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_ARM_EXIDX		(PT_LOPROC + 1)	/* ARM unwind segment.  */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_ARM_EXIDX		(SHT_LOPROC + 1) /* ARM unwind section.  */
-+#define SHT_ARM_PREEMPTMAP	(SHT_LOPROC + 2) /* Preemption details.  */
-+#define SHT_ARM_ATTRIBUTES	(SHT_LOPROC + 3) /* ARM attributes section.  */
-+
-+
-+/* ARM relocs.  */
-+
-+#define R_ARM_NONE		0	/* No reloc */
-+#define R_ARM_PC24		1	/* PC relative 26 bit branch */
-+#define R_ARM_ABS32		2	/* Direct 32 bit  */
-+#define R_ARM_REL32		3	/* PC relative 32 bit */
-+#define R_ARM_PC13		4
-+#define R_ARM_ABS16		5	/* Direct 16 bit */
-+#define R_ARM_ABS12		6	/* Direct 12 bit */
-+#define R_ARM_THM_ABS5		7
-+#define R_ARM_ABS8		8	/* Direct 8 bit */
-+#define R_ARM_SBREL32		9
-+#define R_ARM_THM_PC22		10
-+#define R_ARM_THM_PC8		11
-+#define R_ARM_AMP_VCALL9	12
-+#define R_ARM_SWI24		13	/* Obsolete static relocation.  */
-+#define R_ARM_TLS_DESC		13      /* Dynamic relocation.  */
-+#define R_ARM_THM_SWI8		14
-+#define R_ARM_XPC25		15
-+#define R_ARM_THM_XPC22		16
-+#define R_ARM_TLS_DTPMOD32	17	/* ID of module containing symbol */
-+#define R_ARM_TLS_DTPOFF32	18	/* Offset in TLS block */
-+#define R_ARM_TLS_TPOFF32	19	/* Offset in static TLS block */
-+#define R_ARM_COPY		20	/* Copy symbol at runtime */
-+#define R_ARM_GLOB_DAT		21	/* Create GOT entry */
-+#define R_ARM_JUMP_SLOT		22	/* Create PLT entry */
-+#define R_ARM_RELATIVE		23	/* Adjust by program base */
-+#define R_ARM_GOTOFF		24	/* 32 bit offset to GOT */
-+#define R_ARM_GOTPC		25	/* 32 bit PC relative offset to GOT */
-+#define R_ARM_GOT32		26	/* 32 bit GOT entry */
-+#define R_ARM_PLT32		27	/* 32 bit PLT address */
-+#define R_ARM_ALU_PCREL_7_0	32
-+#define R_ARM_ALU_PCREL_15_8	33
-+#define R_ARM_ALU_PCREL_23_15	34
-+#define R_ARM_LDR_SBREL_11_0	35
-+#define R_ARM_ALU_SBREL_19_12	36
-+#define R_ARM_ALU_SBREL_27_20	37
-+#define R_ARM_TLS_GOTDESC	90
-+#define R_ARM_TLS_CALL		91
-+#define R_ARM_TLS_DESCSEQ	92
-+#define R_ARM_THM_TLS_CALL	93
-+#define R_ARM_GNU_VTENTRY	100
-+#define R_ARM_GNU_VTINHERIT	101
-+#define R_ARM_THM_PC11		102	/* thumb unconditional branch */
-+#define R_ARM_THM_PC9		103	/* thumb conditional branch */
-+#define R_ARM_TLS_GD32		104	/* PC-rel 32 bit for global dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDM32		105	/* PC-rel 32 bit for local dynamic
-+					   thread local data */
-+#define R_ARM_TLS_LDO32		106	/* 32 bit offset relative to TLS
-+					   block */
-+#define R_ARM_TLS_IE32		107	/* PC-rel 32 bit for GOT entry of
-+					   static TLS block offset */
-+#define R_ARM_TLS_LE32		108	/* 32 bit offset relative to static
-+					   TLS block */
-+#define	R_ARM_THM_TLS_DESCSEQ	129
-+#define R_ARM_IRELATIVE		160
-+#define R_ARM_RXPC25		249
-+#define R_ARM_RSBREL32		250
-+#define R_ARM_THM_RPC22		251
-+#define R_ARM_RREL32		252
-+#define R_ARM_RABS22		253
-+#define R_ARM_RPC24		254
-+#define R_ARM_RBASE		255
-+/* Keep this the last entry.  */
-+#define R_ARM_NUM		256
-+
-+/* IA-64 specific declarations.  */
-+
-+/* Processor specific flags for the Ehdr e_flags field.  */
-+#define EF_IA_64_MASKOS		0x0000000f	/* os-specific flags */
-+#define EF_IA_64_ABI64		0x00000010	/* 64-bit ABI */
-+#define EF_IA_64_ARCH		0xff000000	/* arch. version mask */
-+
-+/* Processor specific values for the Phdr p_type field.  */
-+#define PT_IA_64_ARCHEXT	(PT_LOPROC + 0)	/* arch extension bits */
-+#define PT_IA_64_UNWIND		(PT_LOPROC + 1)	/* ia64 unwind bits */
-+#define PT_IA_64_HP_OPT_ANOT	(PT_LOOS + 0x12)
-+#define PT_IA_64_HP_HSL_ANOT	(PT_LOOS + 0x13)
-+#define PT_IA_64_HP_STACK	(PT_LOOS + 0x14)
-+
-+/* Processor specific flags for the Phdr p_flags field.  */
-+#define PF_IA_64_NORECOV	0x80000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Shdr sh_type field.  */
-+#define SHT_IA_64_EXT		(SHT_LOPROC + 0) /* extension bits */
-+#define SHT_IA_64_UNWIND	(SHT_LOPROC + 1) /* unwind bits */
-+
-+/* Processor specific flags for the Shdr sh_flags field.  */
-+#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
-+#define SHF_IA_64_NORECOV	0x20000000	/* spec insns w/o recovery */
-+
-+/* Processor specific values for the Dyn d_tag field.  */
-+#define DT_IA_64_PLT_RESERVE	(DT_LOPROC + 0)
-+#define DT_IA_64_NUM		1
-+
-+/* IA-64 relocations.  */
-+#define R_IA64_NONE		0x00	/* none */
-+#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
-+#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
-+#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
-+#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
-+#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
-+#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
-+#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
-+#define R_IA64_GPREL22		0x2a	/* @gprel(sym + add), add imm22 */
-+#define R_IA64_GPREL64I		0x2b	/* @gprel(sym + add), mov imm64 */
-+#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym + add), data4 MSB */
-+#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym + add), data4 LSB */
-+#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym + add), data8 MSB */
-+#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF22		0x32	/* @ltoff(sym + add), add imm22 */
-+#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym + add), add imm22 */
-+#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym + add), data8 MSB */
-+#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym + add), data8 LSB */
-+#define R_IA64_FPTR64I		0x43	/* @fptr(sym + add), mov imm64 */
-+#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym + add), data4 MSB */
-+#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym + add), data4 LSB */
-+#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym + add), data8 MSB */
-+#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym + add), data8 LSB */
-+#define R_IA64_PCREL60B		0x48	/* @pcrel(sym + add), brl */
-+#define R_IA64_PCREL21B		0x49	/* @pcrel(sym + add), ptb, call */
-+#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym + add), chk.s */
-+#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym + add), fchkf */
-+#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym + add), data4 MSB */
-+#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym + add), data4 LSB */
-+#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym + add), data8 MSB */
-+#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
-+#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
-+#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), data4 MSB */
-+#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), data4 LSB */
-+#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), data8 MSB */
-+#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), data8 LSB */
-+#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym + add), data4 MSB */
-+#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym + add), data4 LSB */
-+#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym + add), data8 MSB */
-+#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym + add), data8 LSB */
-+#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym + add), data4 MSB */
-+#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym + add), data4 LSB */
-+#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym + add), data8 MSB */
-+#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym + add), data8 LSB */
-+#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
-+#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
-+#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
-+#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
-+#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
-+#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
-+#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
-+#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
-+#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym + add), 21bit inst */
-+#define R_IA64_PCREL22		0x7a	/* @pcrel(sym + add), 22bit inst */
-+#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym + add), 64bit inst */
-+#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
-+#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
-+#define R_IA64_COPY		0x84	/* copy relocation */
-+#define R_IA64_SUB		0x85	/* Addend and symbol difference */
-+#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
-+#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
-+#define R_IA64_TPREL14		0x91	/* @tprel(sym + add), imm14 */
-+#define R_IA64_TPREL22		0x92	/* @tprel(sym + add), imm22 */
-+#define R_IA64_TPREL64I		0x93	/* @tprel(sym + add), imm64 */
-+#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym + add), data8 MSB */
-+#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), imm2 */
-+#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym + add), data8 MSB */
-+#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(sym + add)), imm22 */
-+#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym + add), imm14 */
-+#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym + add), imm22 */
-+#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym + add), imm64 */
-+#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym + add), data4 MSB */
-+#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym + add), data4 LSB */
-+#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym + add), data8 MSB */
-+#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
-+
-+/* SH specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field.  */
-+#define EF_SH_MACH_MASK		0x1f
-+#define EF_SH_UNKNOWN		0x0
-+#define EF_SH1			0x1
-+#define EF_SH2			0x2
-+#define EF_SH3			0x3
-+#define EF_SH_DSP		0x4
-+#define EF_SH3_DSP		0x5
-+#define EF_SH4AL_DSP		0x6
-+#define EF_SH3E			0x8
-+#define EF_SH4			0x9
-+#define EF_SH2E			0xb
-+#define EF_SH4A			0xc
-+#define EF_SH2A			0xd
-+#define EF_SH4_NOFPU		0x10
-+#define EF_SH4A_NOFPU		0x11
-+#define EF_SH4_NOMMU_NOFPU	0x12
-+#define EF_SH2A_NOFPU		0x13
-+#define EF_SH3_NOMMU		0x14
-+#define EF_SH2A_SH4_NOFPU	0x15
-+#define EF_SH2A_SH3_NOFPU	0x16
-+#define EF_SH2A_SH4		0x17
-+#define EF_SH2A_SH3E		0x18
-+
-+/* SH relocs.  */
-+#define	R_SH_NONE		0
-+#define	R_SH_DIR32		1
-+#define	R_SH_REL32		2
-+#define	R_SH_DIR8WPN		3
-+#define	R_SH_IND12W		4
-+#define	R_SH_DIR8WPL		5
-+#define	R_SH_DIR8WPZ		6
-+#define	R_SH_DIR8BP		7
-+#define	R_SH_DIR8W		8
-+#define	R_SH_DIR8L		9
-+#define	R_SH_SWITCH16		25
-+#define	R_SH_SWITCH32		26
-+#define	R_SH_USES		27
-+#define	R_SH_COUNT		28
-+#define	R_SH_ALIGN		29
-+#define	R_SH_CODE		30
-+#define	R_SH_DATA		31
-+#define	R_SH_LABEL		32
-+#define	R_SH_SWITCH8		33
-+#define	R_SH_GNU_VTINHERIT	34
-+#define	R_SH_GNU_VTENTRY	35
-+#define	R_SH_TLS_GD_32		144
-+#define	R_SH_TLS_LD_32		145
-+#define	R_SH_TLS_LDO_32		146
-+#define	R_SH_TLS_IE_32		147
-+#define	R_SH_TLS_LE_32		148
-+#define	R_SH_TLS_DTPMOD32	149
-+#define	R_SH_TLS_DTPOFF32	150
-+#define	R_SH_TLS_TPOFF32	151
-+#define	R_SH_GOT32		160
-+#define	R_SH_PLT32		161
-+#define	R_SH_COPY		162
-+#define	R_SH_GLOB_DAT		163
-+#define	R_SH_JMP_SLOT		164
-+#define	R_SH_RELATIVE		165
-+#define	R_SH_GOTOFF		166
-+#define	R_SH_GOTPC		167
-+/* Keep this the last entry.  */
-+#define	R_SH_NUM		256
-+
-+/* S/390 specific definitions.  */
-+
-+/* Valid values for the e_flags field.  */
-+
-+#define EF_S390_HIGH_GPRS    0x00000001  /* High GPRs kernel facility needed.  */
-+
-+/* Additional s390 relocs */
-+
-+#define R_390_NONE		0	/* No reloc.  */
-+#define R_390_8			1	/* Direct 8 bit.  */
-+#define R_390_12		2	/* Direct 12 bit.  */
-+#define R_390_16		3	/* Direct 16 bit.  */
-+#define R_390_32		4	/* Direct 32 bit.  */
-+#define R_390_PC32		5	/* PC relative 32 bit.	*/
-+#define R_390_GOT12		6	/* 12 bit GOT offset.  */
-+#define R_390_GOT32		7	/* 32 bit GOT offset.  */
-+#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
-+#define R_390_COPY		9	/* Copy symbol at runtime.  */
-+#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
-+#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
-+#define R_390_RELATIVE		12	/* Adjust by program base.  */
-+#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
-+#define R_390_GOTPC		14	/* 32 bit PC relative offset to GOT.  */
-+#define R_390_GOT16		15	/* 16 bit GOT offset.  */
-+#define R_390_PC16		16	/* PC relative 16 bit.	*/
-+#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
-+#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
-+#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
-+#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
-+#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
-+#define R_390_64		22	/* Direct 64 bit.  */
-+#define R_390_PC64		23	/* PC relative 64 bit.	*/
-+#define R_390_GOT64		24	/* 64 bit GOT offset.  */
-+#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
-+#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
-+#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
-+#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
-+#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
-+#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
-+#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
-+#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
-+#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
-+#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
-+#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code.  */
-+#define R_390_TLS_GDCALL	38	/* Tag for function call in general
-+					   dynamic TLS code. */
-+#define R_390_TLS_LDCALL	39	/* Tag for function call in local
-+					   dynamic TLS code. */
-+#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
-+					   thread local data.  */
-+#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
-+					  thread local data.  */
-+#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
-+					   block offset. */
-+#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
-+					   thread local data in LE code.  */
-+#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
-+					   negated static TLS block offset.  */
-+#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
-+					   static TLS block.  */
-+#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
-+					   block.  */
-+#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
-+#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.	 */
-+#define R_390_TLS_TPOFF		56	/* Negated offset in static TLS
-+					   block.  */
-+#define R_390_20		57	/* Direct 20 bit.  */
-+#define R_390_GOT20		58	/* 20 bit GOT offset.  */
-+#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
-+#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
-+					   block offset.  */
-+#define R_390_IRELATIVE         61      /* STT_GNU_IFUNC relocation.  */
-+/* Keep this the last entry.  */
-+#define R_390_NUM		62
-+
-+
-+/* CRIS relocations.  */
-+#define R_CRIS_NONE		0
-+#define R_CRIS_8		1
-+#define R_CRIS_16		2
-+#define R_CRIS_32		3
-+#define R_CRIS_8_PCREL		4
-+#define R_CRIS_16_PCREL		5
-+#define R_CRIS_32_PCREL		6
-+#define R_CRIS_GNU_VTINHERIT	7
-+#define R_CRIS_GNU_VTENTRY	8
-+#define R_CRIS_COPY		9
-+#define R_CRIS_GLOB_DAT		10
-+#define R_CRIS_JUMP_SLOT	11
-+#define R_CRIS_RELATIVE		12
-+#define R_CRIS_16_GOT		13
-+#define R_CRIS_32_GOT		14
-+#define R_CRIS_16_GOTPLT	15
-+#define R_CRIS_32_GOTPLT	16
-+#define R_CRIS_32_GOTREL	17
-+#define R_CRIS_32_PLT_GOTREL	18
-+#define R_CRIS_32_PLT_PCREL	19
-+
-+#define R_CRIS_NUM		20
-+
-+
-+/* AMD x86-64 relocations.  */
-+#define R_X86_64_NONE		0	/* No reloc */
-+#define R_X86_64_64		1	/* Direct 64 bit  */
-+#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
-+#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
-+#define R_X86_64_PLT32		4	/* 32 bit PLT address */
-+#define R_X86_64_COPY		5	/* Copy symbol at runtime */
-+#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
-+#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
-+#define R_X86_64_RELATIVE	8	/* Adjust by program base */
-+#define R_X86_64_GOTPCREL	9	/* 32 bit signed PC relative
-+					   offset to GOT */
-+#define R_X86_64_32		10	/* Direct 32 bit zero extended */
-+#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
-+#define R_X86_64_16		12	/* Direct 16 bit zero extended */
-+#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
-+#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
-+#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
-+#define R_X86_64_DTPMOD64	16	/* ID of module containing symbol */
-+#define R_X86_64_DTPOFF64	17	/* Offset in module's TLS block */
-+#define R_X86_64_TPOFF64	18	/* Offset in initial TLS block */
-+#define R_X86_64_TLSGD		19	/* 32 bit signed PC relative offset
-+					   to two GOT entries for GD symbol */
-+#define R_X86_64_TLSLD		20	/* 32 bit signed PC relative offset
-+					   to two GOT entries for LD symbol */
-+#define R_X86_64_DTPOFF32	21	/* Offset in TLS block */
-+#define R_X86_64_GOTTPOFF	22	/* 32 bit signed PC relative offset
-+					   to GOT entry for IE symbol */
-+#define R_X86_64_TPOFF32	23	/* Offset in initial TLS block */
-+#define R_X86_64_PC64		24	/* PC relative 64 bit */
-+#define R_X86_64_GOTOFF64	25	/* 64 bit offset to GOT */
-+#define R_X86_64_GOTPC32	26	/* 32 bit signed pc relative
-+					   offset to GOT */
-+#define R_X86_64_GOT64		27	/* 64-bit GOT entry offset */
-+#define R_X86_64_GOTPCREL64	28	/* 64-bit PC relative offset
-+					   to GOT entry */
-+#define R_X86_64_GOTPC64	29	/* 64-bit PC relative offset to GOT */
-+#define R_X86_64_GOTPLT64	30 	/* like GOT64, says PLT entry needed */
-+#define R_X86_64_PLTOFF64	31	/* 64-bit GOT relative offset
-+					   to PLT entry */
-+#define R_X86_64_SIZE32		32	/* Size of symbol plus 32-bit addend */
-+#define R_X86_64_SIZE64		33	/* Size of symbol plus 64-bit addend */
-+#define R_X86_64_GOTPC32_TLSDESC 34	/* GOT offset for TLS descriptor.  */
-+#define R_X86_64_TLSDESC_CALL   35	/* Marker for call through TLS
-+					   descriptor.  */
-+#define R_X86_64_TLSDESC        36	/* TLS descriptor.  */
-+#define R_X86_64_IRELATIVE	37	/* Adjust indirectly by program base */
-+#define R_X86_64_RELATIVE64	38	/* 64-bit adjust by program base */
-+
-+#define R_X86_64_NUM		39
-+
-+
-+/* AM33 relocations.  */
-+#define R_MN10300_NONE		0	/* No reloc.  */
-+#define R_MN10300_32		1	/* Direct 32 bit.  */
-+#define R_MN10300_16		2	/* Direct 16 bit.  */
-+#define R_MN10300_8		3	/* Direct 8 bit.  */
-+#define R_MN10300_PCREL32	4	/* PC-relative 32-bit.  */
-+#define R_MN10300_PCREL16	5	/* PC-relative 16-bit signed.  */
-+#define R_MN10300_PCREL8	6	/* PC-relative 8-bit signed.  */
-+#define R_MN10300_GNU_VTINHERIT	7	/* Ancient C++ vtable garbage... */
-+#define R_MN10300_GNU_VTENTRY	8	/* ... collection annotation.  */
-+#define R_MN10300_24		9	/* Direct 24 bit.  */
-+#define R_MN10300_GOTPC32	10	/* 32-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTPC16	11	/* 16-bit PCrel offset to GOT.  */
-+#define R_MN10300_GOTOFF32	12	/* 32-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF24	13	/* 24-bit offset from GOT.  */
-+#define R_MN10300_GOTOFF16	14	/* 16-bit offset from GOT.  */
-+#define R_MN10300_PLT32		15	/* 32-bit PCrel to PLT entry.  */
-+#define R_MN10300_PLT16		16	/* 16-bit PCrel to PLT entry.  */
-+#define R_MN10300_GOT32		17	/* 32-bit offset to GOT entry.  */
-+#define R_MN10300_GOT24		18	/* 24-bit offset to GOT entry.  */
-+#define R_MN10300_GOT16		19	/* 16-bit offset to GOT entry.  */
-+#define R_MN10300_COPY		20	/* Copy symbol at runtime.  */
-+#define R_MN10300_GLOB_DAT	21	/* Create GOT entry.  */
-+#define R_MN10300_JMP_SLOT	22	/* Create PLT entry.  */
-+#define R_MN10300_RELATIVE	23	/* Adjust by program base.  */
-+
-+#define R_MN10300_NUM		24
-+
-+
-+/* M32R relocs.  */
-+#define R_M32R_NONE		0	/* No reloc. */
-+#define R_M32R_16		1	/* Direct 16 bit. */
-+#define R_M32R_32		2	/* Direct 32 bit. */
-+#define R_M32R_24		3	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL		4	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL		5	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL		6	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO		7	/* High 16 bit with unsigned low. */
-+#define R_M32R_HI16_SLO		8	/* High 16 bit with signed low. */
-+#define R_M32R_LO16		9	/* Low 16 bit. */
-+#define R_M32R_SDA16		10	/* 16 bit offset in SDA. */
-+#define R_M32R_GNU_VTINHERIT	11
-+#define R_M32R_GNU_VTENTRY	12
-+/* M32R relocs use SHT_RELA.  */
-+#define R_M32R_16_RELA		33	/* Direct 16 bit. */
-+#define R_M32R_32_RELA		34	/* Direct 32 bit. */
-+#define R_M32R_24_RELA		35	/* Direct 24 bit. */
-+#define R_M32R_10_PCREL_RELA	36	/* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL_RELA	37	/* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL_RELA	38	/* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO_RELA	39	/* High 16 bit with unsigned low */
-+#define R_M32R_HI16_SLO_RELA	40	/* High 16 bit with signed low */
-+#define R_M32R_LO16_RELA	41	/* Low 16 bit */
-+#define R_M32R_SDA16_RELA	42	/* 16 bit offset in SDA */
-+#define R_M32R_RELA_GNU_VTINHERIT	43
-+#define R_M32R_RELA_GNU_VTENTRY	44
-+#define R_M32R_REL32		45	/* PC relative 32 bit.  */
-+
-+#define R_M32R_GOT24		48	/* 24 bit GOT entry */
-+#define R_M32R_26_PLTREL	49	/* 26 bit PC relative to PLT shifted */
-+#define R_M32R_COPY		50	/* Copy symbol at runtime */
-+#define R_M32R_GLOB_DAT		51	/* Create GOT entry */
-+#define R_M32R_JMP_SLOT		52	/* Create PLT entry */
-+#define R_M32R_RELATIVE		53	/* Adjust by program base */
-+#define R_M32R_GOTOFF		54	/* 24 bit offset to GOT */
-+#define R_M32R_GOTPC24		55	/* 24 bit PC relative offset to GOT */
-+#define R_M32R_GOT16_HI_ULO	56	/* High 16 bit GOT entry with unsigned
-+					   low */
-+#define R_M32R_GOT16_HI_SLO	57	/* High 16 bit GOT entry with signed
-+					   low */
-+#define R_M32R_GOT16_LO		58	/* Low 16 bit GOT entry */
-+#define R_M32R_GOTPC_HI_ULO	59	/* High 16 bit PC relative offset to
-+					   GOT with unsigned low */
-+#define R_M32R_GOTPC_HI_SLO	60	/* High 16 bit PC relative offset to
-+					   GOT with signed low */
-+#define R_M32R_GOTPC_LO		61	/* Low 16 bit PC relative offset to
-+					   GOT */
-+#define R_M32R_GOTOFF_HI_ULO	62	/* High 16 bit offset to GOT
-+					   with unsigned low */
-+#define R_M32R_GOTOFF_HI_SLO	63	/* High 16 bit offset to GOT
-+					   with signed low */
-+#define R_M32R_GOTOFF_LO	64	/* Low 16 bit offset to GOT */
-+#define R_M32R_NUM		256	/* Keep this the last entry. */
-+
-+
-+/* TILEPro relocations.  */
-+#define R_TILEPRO_NONE		0	/* No reloc */
-+#define R_TILEPRO_32		1	/* Direct 32 bit */
-+#define R_TILEPRO_16		2	/* Direct 16 bit */
-+#define R_TILEPRO_8		3	/* Direct 8 bit */
-+#define R_TILEPRO_32_PCREL	4	/* PC relative 32 bit */
-+#define R_TILEPRO_16_PCREL	5	/* PC relative 16 bit */
-+#define R_TILEPRO_8_PCREL	6	/* PC relative 8 bit */
-+#define R_TILEPRO_LO16		7	/* Low 16 bit */
-+#define R_TILEPRO_HI16		8	/* High 16 bit */
-+#define R_TILEPRO_HA16		9	/* High 16 bit, adjusted */
-+#define R_TILEPRO_COPY		10	/* Copy relocation */
-+#define R_TILEPRO_GLOB_DAT	11	/* Create GOT entry */
-+#define R_TILEPRO_JMP_SLOT	12	/* Create PLT entry */
-+#define R_TILEPRO_RELATIVE	13	/* Adjust by program base */
-+#define R_TILEPRO_BROFF_X1	14	/* X1 pipe branch offset */
-+#define R_TILEPRO_JOFFLONG_X1	15	/* X1 pipe jump offset */
-+#define R_TILEPRO_JOFFLONG_X1_PLT 16	/* X1 pipe jump offset to PLT */
-+#define R_TILEPRO_IMM8_X0	17	/* X0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y0	18	/* Y0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_X1	19	/* X1 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y1	20	/* Y1 pipe 8-bit */
-+#define R_TILEPRO_MT_IMM15_X1	21	/* X1 pipe mtspr */
-+#define R_TILEPRO_MF_IMM15_X1	22	/* X1 pipe mfspr */
-+#define R_TILEPRO_IMM16_X0	23	/* X0 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X1	24	/* X1 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X0_LO	25	/* X0 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X1_LO	26	/* X1 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X0_HI	27	/* X0 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X1_HI	28	/* X1 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X0_HA	29	/* X0 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X1_HA	30	/* X1 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X0_PCREL 31	/* X0 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X1_PCREL 32	/* X1 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X0_LO_PCREL 33	/* X0 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X1_LO_PCREL 34	/* X1 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X0_HI_PCREL 35	/* X0 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X1_HI_PCREL 36	/* X1 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X0_HA_PCREL 37	/* X0 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X1_HA_PCREL 38	/* X1 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X0_GOT	39	/* X0 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT	40	/* X1 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_LO 41	/* X0 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_LO 42	/* X1 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HI 43	/* X0 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HI 44	/* X1 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HA 45	/* X0 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HA 46	/* X1 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_MMSTART_X0	47	/* X0 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X0	48	/* X0 pipe mm "end" */
-+#define R_TILEPRO_MMSTART_X1	49	/* X1 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X1	50	/* X1 pipe mm "end" */
-+#define R_TILEPRO_SHAMT_X0	51	/* X0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_X1	52	/* X1 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y0	53	/* Y0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y1	54	/* Y1 pipe shift amount */
-+#define R_TILEPRO_DEST_IMM8_X1	55	/* X1 pipe destination 8-bit */
-+/* Relocs 56-59 are currently not defined.  */
-+#define R_TILEPRO_TLS_GD_CALL	60	/* "jal" for TLS GD */
-+#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_TLS_IE_LOAD	65	/* "lw_tls" for TLS IE */
-+#define R_TILEPRO_IMM16_X0_TLS_GD 66	/* X0 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD 67	/* X1 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68	/* X0 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69	/* X1 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70	/* X0 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71	/* X1 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72	/* X0 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73	/* X1 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE 74	/* X0 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE 75	/* X1 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76	/* X0 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77	/* X1 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78	/* X0 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79	/* X1 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80	/* X0 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81	/* X1 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_TLS_DTPMOD32	82	/* ID of module containing symbol */
-+#define R_TILEPRO_TLS_DTPOFF32	83	/* Offset in TLS block */
-+#define R_TILEPRO_TLS_TPOFF32	84	/* Offset in static TLS block */
-+#define R_TILEPRO_IMM16_X0_TLS_LE 85	/* X0 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE 86	/* X1 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87	/* X0 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88	/* X1 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89	/* X0 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90	/* X1 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91	/* X0 pipe ha() 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92	/* X1 pipe ha() 16-bit TLS LE offset */
-+
-+#define R_TILEPRO_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEPRO_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEPRO_NUM		130
-+
-+
-+/* TILE-Gx relocations.  */
-+#define R_TILEGX_NONE		0	/* No reloc */
-+#define R_TILEGX_64		1	/* Direct 64 bit */
-+#define R_TILEGX_32		2	/* Direct 32 bit */
-+#define R_TILEGX_16		3	/* Direct 16 bit */
-+#define R_TILEGX_8		4	/* Direct 8 bit */
-+#define R_TILEGX_64_PCREL	5	/* PC relative 64 bit */
-+#define R_TILEGX_32_PCREL	6	/* PC relative 32 bit */
-+#define R_TILEGX_16_PCREL	7	/* PC relative 16 bit */
-+#define R_TILEGX_8_PCREL	8	/* PC relative 8 bit */
-+#define R_TILEGX_HW0		9	/* hword 0 16-bit */
-+#define R_TILEGX_HW1		10	/* hword 1 16-bit */
-+#define R_TILEGX_HW2		11	/* hword 2 16-bit */
-+#define R_TILEGX_HW3		12	/* hword 3 16-bit */
-+#define R_TILEGX_HW0_LAST	13	/* last hword 0 16-bit */
-+#define R_TILEGX_HW1_LAST	14	/* last hword 1 16-bit */
-+#define R_TILEGX_HW2_LAST	15	/* last hword 2 16-bit */
-+#define R_TILEGX_COPY		16	/* Copy relocation */
-+#define R_TILEGX_GLOB_DAT	17	/* Create GOT entry */
-+#define R_TILEGX_JMP_SLOT	18	/* Create PLT entry */
-+#define R_TILEGX_RELATIVE	19	/* Adjust by program base */
-+#define R_TILEGX_BROFF_X1	20	/* X1 pipe branch offset */
-+#define R_TILEGX_JUMPOFF_X1	21	/* X1 pipe jump offset */
-+#define R_TILEGX_JUMPOFF_X1_PLT	22	/* X1 pipe jump offset to PLT */
-+#define R_TILEGX_IMM8_X0	23	/* X0 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y0	24	/* Y0 pipe 8-bit */
-+#define R_TILEGX_IMM8_X1	25	/* X1 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y1	26	/* Y1 pipe 8-bit */
-+#define R_TILEGX_DEST_IMM8_X1	27	/* X1 pipe destination 8-bit */
-+#define R_TILEGX_MT_IMM14_X1	28	/* X1 pipe mtspr */
-+#define R_TILEGX_MF_IMM14_X1	29	/* X1 pipe mfspr */
-+#define R_TILEGX_MMSTART_X0	30	/* X0 pipe mm "start" */
-+#define R_TILEGX_MMEND_X0	31	/* X0 pipe mm "end" */
-+#define R_TILEGX_SHAMT_X0	32	/* X0 pipe shift amount */
-+#define R_TILEGX_SHAMT_X1	33	/* X1 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y0	34	/* Y0 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y1	35	/* Y1 pipe shift amount */
-+#define R_TILEGX_IMM16_X0_HW0	36	/* X0 pipe hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0	37	/* X1 pipe hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1	38	/* X0 pipe hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1	39	/* X1 pipe hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2	40	/* X0 pipe hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2	41	/* X1 pipe hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3	42	/* X0 pipe hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3	43	/* X1 pipe hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST 44	/* X0 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST 45	/* X1 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST 46	/* X0 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST 47	/* X1 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST 48	/* X0 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST 49	/* X1 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_PCREL 50	/* X0 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_PCREL 51	/* X1 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_PCREL 52	/* X0 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_PCREL 53	/* X1 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_PCREL 54	/* X0 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_PCREL 55	/* X1 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3_PCREL 56	/* X0 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3_PCREL 57	/* X1 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_GOT 64	/* X0 pipe hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_GOT 65	/* X1 pipe hword 0 GOT offset */
-+/* Relocs 66-71 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */
-+/* Relocs 76-77 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78	/* X0 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79	/* X1 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80	/* X0 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81	/* X1 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */
-+/* Relocs 90-91 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92	/* X0 pipe hword 0 TLS IE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93	/* X1 pipe hword 0 TLS IE offset */
-+/* Relocs 94-99 are currently not defined.  */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */
-+/* Relocs 104-105 are currently not defined.  */
-+#define R_TILEGX_TLS_DTPMOD64	106	/* 64-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF64	107	/* 64-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF64	108	/* 64-bit offset in static TLS block */
-+#define R_TILEGX_TLS_DTPMOD32	109	/* 32-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF32	110	/* 32-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF32	111	/* 32-bit offset in static TLS block */
-+#define R_TILEGX_TLS_GD_CALL	112	/* "jal" for TLS GD */
-+#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113	/* X0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114	/* X1 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115	/* Y0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116	/* Y1 pipe "addi" for TLS GD */
-+#define R_TILEGX_TLS_IE_LOAD	117	/* "ld_tls" for TLS IE */
-+#define R_TILEGX_IMM8_X0_TLS_ADD 118	/* X0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_X1_TLS_ADD 119	/* X1 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y0_TLS_ADD 120	/* Y0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y1_TLS_ADD 121	/* Y1 pipe "addi" for TLS GD/IE */
-+
-+#define R_TILEGX_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
-+#define R_TILEGX_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
-+
-+#define R_TILEGX_NUM		130
-+
-+#endif	/* elf.h */
---- a/scripts/mod/mk_elfconfig.c
-+++ b/scripts/mod/mk_elfconfig.c
-@@ -2,7 +2,11 @@
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
-+#ifndef __APPLE__
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- int
- main(int argc, char **argv)
---- a/scripts/mod/modpost.h
-+++ b/scripts/mod/modpost.h
-@@ -9,7 +9,11 @@
- #include <sys/mman.h>
- #include <fcntl.h>
- #include <unistd.h>
-+#if !(defined(__APPLE__) || defined(__CYGWIN__))
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
- 
- #include "list.h"
- #include "elfconfig.h"
diff --git a/target/linux/generic/hack-6.1/211-darwin-uuid-typedef-clash.patch b/target/linux/generic/hack-6.1/211-darwin-uuid-typedef-clash.patch
deleted file mode 100644
index 50a6227148f4..000000000000
--- a/target/linux/generic/hack-6.1/211-darwin-uuid-typedef-clash.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From e44fc2af1ddc452b6659d08c16973d65c73b7d0a Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Wed, 5 Feb 2020 18:36:43 +0000
-Subject: [PATCH] file2alias: build on macos
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- scripts/mod/file2alias.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/scripts/mod/file2alias.c
-+++ b/scripts/mod/file2alias.c
-@@ -38,6 +38,9 @@ typedef struct {
- 	__u8 b[16];
- } guid_t;
- 
-+#ifdef __APPLE__
-+#define uuid_t compat_uuid_t
-+#endif
- /* backwards compatibility, don't use in new code */
- typedef struct {
- 	__u8 b[16];
diff --git a/target/linux/generic/hack-6.1/212-tools_portability.patch b/target/linux/generic/hack-6.1/212-tools_portability.patch
deleted file mode 100644
index 3ee4393006f9..000000000000
--- a/target/linux/generic/hack-6.1/212-tools_portability.patch
+++ /dev/null
@@ -1,360 +0,0 @@
-From 48232d3d931c95953ce2ddfe7da7bb164aef6a73 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:03:16 +0200
-Subject: fix portability of some includes files in tools/ used on the host
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- tools/include/tools/be_byteshift.h |  4 ++++
- tools/include/tools/le_byteshift.h |  4 ++++
- tools/include/tools/linux_types.h  | 22 ++++++++++++++++++++++
- 3 files changed, 30 insertions(+)
- create mode 100644 tools/include/tools/linux_types.h
-
---- a/tools/include/tools/be_byteshift.h
-+++ b/tools/include/tools/be_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_BE_BYTESHIFT_H
- #define _TOOLS_BE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_be16(const uint8_t *p)
---- a/tools/include/tools/le_byteshift.h
-+++ b/tools/include/tools/le_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_LE_BYTESHIFT_H
- #define _TOOLS_LE_BYTESHIFT_H
- 
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
- 
- static inline uint16_t __get_unaligned_le16(const uint8_t *p)
---- /dev/null
-+++ b/tools/include/tools/linux_types.h
-@@ -0,0 +1,18 @@
-+#ifndef __LINUX_TYPES_H
-+#define __LINUX_TYPES_H
-+
-+#include <stdint.h>
-+
-+typedef int8_t __s8;
-+typedef uint8_t __u8;
-+
-+typedef int16_t __s16;
-+typedef uint16_t __u16;
-+
-+typedef int32_t __s32;
-+typedef uint32_t __u32;
-+
-+typedef int64_t __s64;
-+typedef uint64_t __u64;
-+
-+#endif
---- a/tools/include/linux/types.h
-+++ b/tools/include/linux/types.h
-@@ -10,8 +10,12 @@
- #define __SANE_USERSPACE_TYPES__	/* For PPC64, to get LL64 types */
- #endif
- 
-+#ifndef __linux__
-+#include <tools/linux_types.h>
-+#else
- #include <asm/types.h>
- #include <asm/posix_types.h>
-+#endif
- 
- struct page;
- struct kmem_cache;
-@@ -51,7 +55,9 @@ typedef __s8  s8;
- #define __force
- #define __user
- #define __must_check
-+#ifndef __cold
- #define __cold
-+#endif
- 
- typedef __u16 __bitwise __le16;
- typedef __u16 __bitwise __be16;
---- a/tools/perf/pmu-events/jevents.py
-+++ b/tools/perf/pmu-events/jevents.py
-@@ -684,6 +684,7 @@ def main() -> None:
- #include "util/header.h"
- #include "util/pmu.h"
- #include <string.h>
-+#include <strings.h>
- #include <stddef.h>
- 
- struct compact_pmu_event {
---- a/tools/arch/x86/include/asm/insn.h
-+++ b/tools/arch/x86/include/asm/insn.h
-@@ -7,8 +7,8 @@
-  * Copyright (C) IBM Corporation, 2009
-  */
- 
--#include <asm/byteorder.h>
- /* insn_attr_t is defined in inat.h */
-+#include <linux/kernel.h>
- #include "inat.h" /* __ignore_sync_check__ */
- 
- #if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
---- a/tools/arch/x86/include/asm/orc_types.h
-+++ b/tools/arch/x86/include/asm/orc_types.h
-@@ -40,7 +40,6 @@
- #define ORC_REG_MAX			15
- 
- #ifndef __ASSEMBLY__
--#include <asm/byteorder.h>
- 
- /*
-  * This struct is more or less a vastly simplified version of the DWARF Call
-@@ -53,12 +52,12 @@
- struct orc_entry {
- 	s16		sp_offset;
- 	s16		bp_offset;
--#if defined(__LITTLE_ENDIAN_BITFIELD)
-+#if __BYTE_ORDER == __LITTLE_ENDIAN
- 	unsigned	sp_reg:4;
- 	unsigned	bp_reg:4;
- 	unsigned	type:2;
- 	unsigned	end:1;
--#elif defined(__BIG_ENDIAN_BITFIELD)
-+#elif __BYTE_ORDER == __BIG_ENDIAN
- 	unsigned	bp_reg:4;
- 	unsigned	sp_reg:4;
- 	unsigned	unused:5;
---- a/tools/arch/x86/lib/insn.c
-+++ b/tools/arch/x86/lib/insn.c
-@@ -15,7 +15,11 @@
- #include "../include/asm/insn.h" /* __ignore_sync_check__ */
- #include "../include/asm-generic/unaligned.h" /* __ignore_sync_check__ */
- 
-+#ifdef __KERNEL__
- #include <linux/errno.h>
-+#else
-+#include <errno.h>
-+#endif
- #include <linux/kconfig.h>
- 
- #include "../include/asm/emulate_prefix.h" /* __ignore_sync_check__ */
---- a/tools/include/asm-generic/bitops/fls.h
-+++ b/tools/include/asm-generic/bitops/fls.h
-@@ -2,6 +2,8 @@
- #ifndef _ASM_GENERIC_BITOPS_FLS_H_
- #define _ASM_GENERIC_BITOPS_FLS_H_
- 
-+#include <string.h>
-+
- /**
-  * fls - find last (most-significant) bit set
-  * @x: the word to search
-@@ -10,7 +12,7 @@
-  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
-  */
- 
--static __always_inline int fls(unsigned int x)
-+static __always_inline int __generic_fls(unsigned int x)
- {
- 	int r = 32;
- 
-@@ -38,5 +40,6 @@ static __always_inline int fls(unsigned
- 	}
- 	return r;
- }
-+#define fls __generic_fls
- 
- #endif /* _ASM_GENERIC_BITOPS_FLS_H_ */
---- a/tools/include/asm-generic/bitsperlong.h
-+++ b/tools/include/asm-generic/bitsperlong.h
-@@ -4,11 +4,13 @@
- 
- #include <uapi/asm-generic/bitsperlong.h>
- 
-+#ifndef BITS_PER_LONG
- #ifdef __SIZEOF_LONG__
- #define BITS_PER_LONG (__CHAR_BIT__ * __SIZEOF_LONG__)
- #else
- #define BITS_PER_LONG __WORDSIZE
- #endif
-+#endif
- 
- #if BITS_PER_LONG != __BITS_PER_LONG
- #error Inconsistent word size. Check asm/bitsperlong.h
---- a/tools/include/linux/rbtree.h
-+++ b/tools/include/linux/rbtree.h
-@@ -18,7 +18,6 @@
- #define __TOOLS_LINUX_PERF_RBTREE_H
- 
- #include <linux/kernel.h>
--#include <linux/stddef.h>
- 
- struct rb_node {
- 	unsigned long  __rb_parent_color;
---- a/tools/objtool/Makefile
-+++ b/tools/objtool/Makefile
-@@ -4,7 +4,7 @@ include ../scripts/Makefile.arch
- 
- # always use the host compiler
- AR	 = $(HOSTAR)
--CC	 = $(HOSTCC)
-+CC	 = $(HOSTCC) $(HOST_EXTRACFLAGS)
- LD	 = $(HOSTLD)
- 
- ifeq ($(srctree),)
-@@ -43,6 +43,7 @@ BUILD_ORC := n
- 
- ifeq ($(SRCARCH),x86)
- 	BUILD_ORC := y
-+	CFLAGS += -DBUILD_ORC
- endif
- 
- export BUILD_ORC
---- a/tools/objtool/check.c
-+++ b/tools/objtool/check.c
-@@ -1164,11 +1164,12 @@ static int add_ignore_alternatives(struc
- 	return 0;
- }
- 
-+#ifndef BUILD_ORC
- /*
-  * Symbols that replace INSN_CALL_DYNAMIC, every (tail) call to such a symbol
-  * will be added to the .retpoline_sites section.
-  */
--__weak bool arch_is_retpoline(struct symbol *sym)
-+bool arch_is_retpoline(struct symbol *sym)
- {
- 	return false;
- }
-@@ -1177,7 +1178,7 @@ __weak bool arch_is_retpoline(struct sym
-  * Symbols that replace INSN_RETURN, every (tail) call to such a symbol
-  * will be added to the .return_sites section.
-  */
--__weak bool arch_is_rethunk(struct symbol *sym)
-+bool arch_is_rethunk(struct symbol *sym)
- {
- 	return false;
- }
-@@ -1186,10 +1187,11 @@ __weak bool arch_is_rethunk(struct symbo
-  * Symbols that are embedded inside other instructions, because sometimes crazy
-  * code exists. These are mostly ignored for validation purposes.
-  */
--__weak bool arch_is_embedded_insn(struct symbol *sym)
-+bool arch_is_embedded_insn(struct symbol *sym)
- {
- 	return false;
- }
-+#endif
- 
- #define NEGATIVE_RELOC	((void *)-1L)
- 
---- a/tools/objtool/include/objtool/objtool.h
-+++ b/tools/objtool/include/objtool/objtool.h
-@@ -12,7 +12,9 @@
- 
- #include <objtool/elf.h>
- 
-+#ifndef __weak
- #define __weak __attribute__((weak))
-+#endif
- 
- struct pv_state {
- 	bool clean;
---- a/tools/objtool/orc_dump.c
-+++ b/tools/objtool/orc_dump.c
-@@ -5,10 +5,10 @@
- 
- #include <unistd.h>
- #include <linux/objtool.h>
--#include <asm/orc_types.h>
- #include <objtool/objtool.h>
- #include <objtool/warn.h>
- #include <objtool/endianness.h>
-+#include <asm/orc_types.h>
- 
- static const char *reg_name(unsigned int reg)
- {
---- a/tools/objtool/orc_gen.c
-+++ b/tools/objtool/orc_gen.c
-@@ -7,11 +7,11 @@
- #include <string.h>
- 
- #include <linux/objtool.h>
--#include <asm/orc_types.h>
- 
- #include <objtool/check.h>
- #include <objtool/warn.h>
- #include <objtool/endianness.h>
-+#include <asm/orc_types.h>
- 
- static int init_orc_entry(struct orc_entry *orc, struct cfi_state *cfi,
- 			  struct instruction *insn)
---- a/tools/objtool/special.c
-+++ b/tools/objtool/special.c
-@@ -54,9 +54,11 @@ struct special_entry entries[] = {
- 	{},
- };
- 
--void __weak arch_handle_alternative(unsigned short feature, struct special_alt *alt)
-+#ifndef BUILD_ORC
-+void arch_handle_alternative(unsigned short feature, struct special_alt *alt)
- {
- }
-+#endif
- 
- static void reloc_to_sec_off(struct reloc *reloc, struct section **sec,
- 			     unsigned long *off)
---- a/tools/objtool/weak.c
-+++ b/tools/objtool/weak.c
-@@ -15,12 +15,14 @@
- 	return ENOSYS;							\
- })
- 
--int __weak orc_dump(const char *_objname)
-+#ifndef BUILD_ORC
-+int orc_dump(const char *_objname)
- {
- 	UNSUPPORTED("ORC");
- }
- 
--int __weak orc_create(struct objtool_file *file)
-+int orc_create(struct objtool_file *file)
- {
- 	UNSUPPORTED("ORC");
- }
-+#endif
---- a/tools/scripts/Makefile.include
-+++ b/tools/scripts/Makefile.include
-@@ -92,7 +92,7 @@ LLVM_OBJCOPY	?= llvm-objcopy
- LLVM_STRIP	?= llvm-strip
- 
- ifeq ($(CC_NO_CLANG), 1)
--EXTRA_WARNINGS += -Wstrict-aliasing=3
-+# EXTRA_WARNINGS += -Wstrict-aliasing=3
- 
- else ifneq ($(CROSS_COMPILE),)
- # Allow userspace to override CLANG_CROSS_FLAGS to specify their own
---- a/tools/lib/string.c
-+++ b/tools/lib/string.c
-@@ -100,6 +100,7 @@ int strtobool(const char *s, bool *res)
- #pragma clang diagnostic push
- #pragma clang diagnostic ignored "-Wignored-attributes"
- #endif
-+#ifndef __APPLE__
- size_t __weak strlcpy(char *dest, const char *src, size_t size)
- {
- 	size_t ret = strlen(src);
-@@ -111,6 +112,7 @@ size_t __weak strlcpy(char *dest, const
- 	}
- 	return ret;
- }
-+#endif
- #ifdef __clang__
- #pragma clang diagnostic pop
- #endif
diff --git a/target/linux/generic/hack-6.1/214-spidev_h_portability.patch b/target/linux/generic/hack-6.1/214-spidev_h_portability.patch
deleted file mode 100644
index db754a29033c..000000000000
--- a/target/linux/generic/hack-6.1/214-spidev_h_portability.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From be9be95ff10e16a5b4ad36f903978d0cc5747024 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:04:08 +0200
-Subject: kernel: fix linux/spi/spidev.h portability issues with musl
-
-Felix will try to get this define included into musl
-
-lede-commit: 795e7cf60de19e7a076a46874fab7bb88b43bbff
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/spi/spidev.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/uapi/linux/spi/spidev.h
-+++ b/include/uapi/linux/spi/spidev.h
-@@ -93,7 +93,7 @@ struct spi_ioc_transfer {
- 
- /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
- #define SPI_MSGSIZE(N) \
--	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
-+	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \
- 		? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
- #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
- 
diff --git a/target/linux/generic/hack-6.1/220-arm-gc_sections.patch b/target/linux/generic/hack-6.1/220-arm-gc_sections.patch
deleted file mode 100644
index a6a6c7cf2cc9..000000000000
--- a/target/linux/generic/hack-6.1/220-arm-gc_sections.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From e3d8676f5722b7622685581e06e8f53e6138e3ab Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 23:42:36 +0200
-Subject: use -ffunction-sections, -fdata-sections and --gc-sections
-
-In combination with kernel symbol export stripping this significantly reduces
-the kernel image size. Used on both ARM and MIPS architectures.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -124,6 +124,7 @@ config ARM
- 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
- 	select IRQ_FORCED_THREADING
- 	select LOCK_MM_AND_FIND_VMA
-+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- 	select MODULES_USE_ELF_REL
- 	select NEED_DMA_MAP_STATE
- 	select OF_EARLY_FLATTREE if OF
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -91,6 +91,7 @@ endif
- ifeq ($(CONFIG_USE_OF),y)
- OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
- endif
-+KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL))
- 
- OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
- 
---- a/arch/arm/kernel/vmlinux.lds.S
-+++ b/arch/arm/kernel/vmlinux.lds.S
-@@ -75,7 +75,7 @@ SECTIONS
- 	. = ALIGN(4);
- 	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- 		__start___ex_table = .;
--		ARM_MMU_KEEP(*(__ex_table))
-+		KEEP(*(__ex_table))
- 		__stop___ex_table = .;
- 	}
- 
-@@ -100,24 +100,24 @@ SECTIONS
- 	}
- 	.init.arch.info : {
- 		__arch_info_begin = .;
--		*(.arch.info.init)
-+		KEEP(*(.arch.info.init))
- 		__arch_info_end = .;
- 	}
- 	.init.tagtable : {
- 		__tagtable_begin = .;
--		*(.taglist.init)
-+		KEEP(*(.taglist.init))
- 		__tagtable_end = .;
- 	}
- #ifdef CONFIG_SMP_ON_UP
- 	.init.smpalt : {
- 		__smpalt_begin = .;
--		*(.alt.smp.init)
-+		KEEP(*(.alt.smp.init))
- 		__smpalt_end = .;
- 	}
- #endif
- 	.init.pv_table : {
- 		__pv_table_begin = .;
--		*(.pv_table)
-+		KEEP(*(.pv_table))
- 		__pv_table_end = .;
- 	}
- 
---- a/arch/arm/include/asm/vmlinux.lds.h
-+++ b/arch/arm/include/asm/vmlinux.lds.h
-@@ -42,13 +42,13 @@
- #define PROC_INFO							\
- 		. = ALIGN(4);						\
- 		__proc_info_begin = .;					\
--		*(.proc.info.init)					\
-+		KEEP(*(.proc.info.init))				\
- 		__proc_info_end = .;
- 
- #define IDMAP_TEXT							\
- 		ALIGN_FUNCTION();					\
- 		__idmap_text_start = .;					\
--		*(.idmap.text)						\
-+		KEEP(*(.idmap.text))					\
- 		__idmap_text_end = .;					\
- 
- #define ARM_DISCARD							\
-@@ -109,12 +109,12 @@
- 	. = ALIGN(8);							\
- 	.ARM.unwind_idx : {						\
- 		__start_unwind_idx = .;					\
--		*(.ARM.exidx*)						\
-+		KEEP(*(.ARM.exidx*))					\
- 		__stop_unwind_idx = .;					\
- 	}								\
- 	.ARM.unwind_tab : {						\
- 		__start_unwind_tab = .;					\
--		*(.ARM.extab*)						\
-+		KEEP(*(.ARM.extab*))					\
- 		__stop_unwind_tab = .;					\
- 	}
- 
-@@ -126,7 +126,7 @@
- 	__vectors_lma = .;						\
- 	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
- 		.vectors {						\
--			*(.vectors)					\
-+			KEEP(*(.vectors))				\
- 		}							\
- 		.vectors.bhb.loop8 {					\
- 			*(.vectors.bhb.loop8)				\
-@@ -144,7 +144,7 @@
- 									\
- 	__stubs_lma = .;						\
- 	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) {		\
--		*(.stubs)						\
-+		KEEP(*(.stubs))						\
- 	}								\
- 	ARM_LMA(__stubs, .stubs);					\
- 	. = __stubs_lma + SIZEOF(.stubs);				\
diff --git a/target/linux/generic/hack-6.1/221-module_exports.patch b/target/linux/generic/hack-6.1/221-module_exports.patch
deleted file mode 100644
index 573eeb15d7d2..000000000000
--- a/target/linux/generic/hack-6.1/221-module_exports.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From b14784e7883390c20ed3ff904892255404a5914b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:05:53 +0200
-Subject: add an optional config option for stripping all unnecessary symbol exports from the kernel image
-
-lede-commit: bb5a40c64b7c4f4848509fa0a6625055fc9e66cc
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/asm-generic/vmlinux.lds.h | 18 +++++++++++++++---
- include/linux/export.h            |  9 ++++++++-
- scripts/Makefile.build            |  2 +-
- 3 files changed, 24 insertions(+), 5 deletions(-)
-
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -81,6 +81,16 @@
- #define RO_EXCEPTION_TABLE
- #endif
- 
-+#ifndef SYMTAB_KEEP
-+#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*)))
-+#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*)))
-+#endif
-+
-+#ifndef SYMTAB_DISCARD
-+#define SYMTAB_DISCARD
-+#define SYMTAB_DISCARD_GPL
-+#endif
-+
- /* Align . to a 8 byte boundary equals to maximum function alignment. */
- #define ALIGN_FUNCTION()  . = ALIGN(8)
- 
-@@ -511,14 +521,14 @@
- 	/* Kernel symbol table: Normal symbols */			\
- 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
- 		__start___ksymtab = .;					\
--		KEEP(*(SORT(___ksymtab+*)))				\
-+		SYMTAB_KEEP						\
- 		__stop___ksymtab = .;					\
- 	}								\
- 									\
- 	/* Kernel symbol table: GPL-only symbols */			\
- 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
- 		__start___ksymtab_gpl = .;				\
--		KEEP(*(SORT(___ksymtab_gpl+*)))				\
-+		SYMTAB_KEEP_GPL						\
- 		__stop___ksymtab_gpl = .;				\
- 	}								\
- 									\
-@@ -538,7 +548,7 @@
- 									\
- 	/* Kernel symbol table: strings */				\
-         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
--		*(__ksymtab_strings)					\
-+		*(__ksymtab_strings+*)					\
- 	}								\
- 									\
- 	/* __*init sections */						\
-@@ -1042,6 +1052,8 @@
- #define COMMON_DISCARDS							\
- 	SANITIZER_DISCARDS						\
- 	PATCHABLE_DISCARDS						\
-+	SYMTAB_DISCARD							\
-+	SYMTAB_DISCARD_GPL						\
- 	*(.discard)							\
- 	*(.discard.*)							\
- 	*(.modinfo)							\
---- a/include/linux/export.h
-+++ b/include/linux/export.h
-@@ -72,6 +72,12 @@ struct kernel_symbol {
- 
- #else
- 
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(sym)
-+#else
-+#define __EXPORT_SUFFIX(sym) "+" #sym
-+#endif
-+
- /*
-  * For every exported symbol, do the following:
-  *
-@@ -87,7 +93,7 @@ struct kernel_symbol {
- 	extern typeof(sym) sym;							\
- 	extern const char __kstrtab_##sym[];					\
- 	extern const char __kstrtabns_##sym[];					\
--	asm("	.section \"__ksymtab_strings\",\"aMS\",%progbits,1	\n"	\
-+	asm("	.section \"__ksymtab_strings" __EXPORT_SUFFIX(sym) "\",\"aMS\",%progbits,1	\n"	\
- 	    "__kstrtab_" #sym ":					\n"	\
- 	    "	.asciz 	\"" #sym "\"					\n"	\
- 	    "__kstrtabns_" #sym ":					\n"	\
---- a/include/asm-generic/export.h
-+++ b/include/asm-generic/export.h
-@@ -31,6 +31,12 @@
- #endif
- .endm
- 
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(name)
-+#else
-+#define __EXPORT_SUFFIX(name) + #name
-+#endif
-+
- /*
-  * note on .section use: we specify progbits since usage of the "M" (SHF_MERGE)
-  * section flag requires it. Use '%progbits' instead of '@progbits' since the
-@@ -44,7 +50,7 @@
- __ksymtab_\name:
- 	__put \val, __kstrtab_\name
- 	.previous
--	.section __ksymtab_strings,"aMS",%progbits,1
-+	.section __ksymtab_strings __EXPORT_SUFFIX(name),"aMS",%progbits,1
- __kstrtab_\name:
- 	.asciz "\name"
- 	.previous
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -391,7 +391,7 @@ targets += $(real-dtb-y) $(lib-y) $(alwa
- # Linker scripts preprocessor (.lds.S -> .lds)
- # ---------------------------------------------------------------------------
- quiet_cmd_cpp_lds_S = LDS     $@
--      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
-+      cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -U$(ARCH) \
- 	                     -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
- 
- $(obj)/%.lds: $(src)/%.lds.S FORCE
diff --git a/target/linux/generic/hack-6.1/230-openwrt_lzma_options.patch b/target/linux/generic/hack-6.1/230-openwrt_lzma_options.patch
deleted file mode 100644
index ddf7f5e0c0c2..000000000000
--- a/target/linux/generic/hack-6.1/230-openwrt_lzma_options.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From b3d00b452467f621317953d9e4c6f9ae8dcfd271 Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:06:55 +0200
-Subject: use the openwrt lzma options for now
-
-lede-commit: 548de949f392049420a6a1feeef118b30ab8ea8c
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- lib/decompress.c              |  1 +
- scripts/Makefile.lib          |  2 +-
- usr/gen_initramfs_list.sh | 10 +++++-----
- 3 files changed, 7 insertions(+), 6 deletions(-)
-
---- a/lib/decompress.c
-+++ b/lib/decompress.c
-@@ -53,6 +53,7 @@ static const struct compress_format comp
- 	{ {0x1f, 0x9e}, "gzip", gunzip },
- 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
- 	{ {0x5d, 0x00}, "lzma", unlzma },
-+	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
- 	{ {0xfd, 0x37}, "xz", unxz },
- 	{ {0x89, 0x4c}, "lzo", unlzo },
- 	{ {0x02, 0x21}, "lz4", unlz4 },
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -447,10 +447,10 @@ quiet_cmd_bzip2_with_size = BZIP2   $@
- # ---------------------------------------------------------------------------
- 
- quiet_cmd_lzma = LZMA    $@
--      cmd_lzma = cat $(real-prereqs) | $(LZMA) -9 > $@
-+      cmd_lzma = cat $(real-prereqs) | $(LZMA) e -d20 -lc1 -lp2 -pb2 -eos -si -so > $@
- 
- quiet_cmd_lzma_with_size = LZMA    $@
--      cmd_lzma_with_size = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@
-+      cmd_lzma_with_size = { cat $(real-prereqs) | $(LZMA) e -d20 -lc1 -lp2 -pb2 -eos -si -so; $(size_append); } > $@
- 
- quiet_cmd_lzo = LZO     $@
-       cmd_lzo = cat $(real-prereqs) | $(KLZOP) -9 > $@
diff --git a/target/linux/generic/hack-6.1/250-netfilter_depends.patch b/target/linux/generic/hack-6.1/250-netfilter_depends.patch
deleted file mode 100644
index fbb5a61157fd..000000000000
--- a/target/linux/generic/hack-6.1/250-netfilter_depends.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: hack: net: remove bogus netfilter dependencies
-
-lede-commit: 589d2a377dee27d206fc3725325309cf649e4df6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/Kconfig | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -253,7 +253,6 @@ config NF_CONNTRACK_FTP
- 
- config NF_CONNTRACK_H323
- 	tristate "H.323 protocol support"
--	depends on IPV6 || IPV6=n
- 	depends on NETFILTER_ADVANCED
- 	help
- 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-@@ -1118,7 +1117,6 @@ config NETFILTER_XT_TARGET_SECMARK
- 
- config NETFILTER_XT_TARGET_TCPMSS
- 	tristate '"TCPMSS" target support'
--	depends on IPV6 || IPV6=n
- 	default m if NETFILTER_ADVANCED=n
- 	help
- 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/hack-6.1/251-kconfig.patch b/target/linux/generic/hack-6.1/251-kconfig.patch
deleted file mode 100644
index fcf4eaf6e8d3..000000000000
--- a/target/linux/generic/hack-6.1/251-kconfig.patch
+++ /dev/null
@@ -1,157 +0,0 @@
-From da3c50704f14132f4adf80d48e9a4cd5d46e54c9 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:09:21 +0200
-Subject: kconfig: owrt specifc dependencies
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- crypto/Kconfig        | 10 +++++-----
- drivers/bcma/Kconfig  |  1 +
- drivers/ssb/Kconfig   |  3 ++-
- lib/Kconfig           |  8 ++++----
- net/netfilter/Kconfig |  2 +-
- net/wireless/Kconfig  | 17 ++++++++++-------
- sound/core/Kconfig    |  4 ++--
- 7 files changed, 25 insertions(+), 20 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -55,7 +55,7 @@ config CRYPTO_FIPS_VERSION
- 	  By default the KERNELRELEASE value is used.
- 
- config CRYPTO_ALGAPI
--	tristate
-+	tristate "ALGAPI"
- 	select CRYPTO_ALGAPI2
- 	help
- 	  This option provides the API for cryptographic algorithms.
-@@ -64,7 +64,7 @@ config CRYPTO_ALGAPI2
- 	tristate
- 
- config CRYPTO_AEAD
--	tristate
-+	tristate "AEAD"
- 	select CRYPTO_AEAD2
- 	select CRYPTO_ALGAPI
- 
-@@ -75,7 +75,7 @@ config CRYPTO_AEAD2
- 	select CRYPTO_RNG2
- 
- config CRYPTO_SKCIPHER
--	tristate
-+	tristate "SKCIPHER"
- 	select CRYPTO_SKCIPHER2
- 	select CRYPTO_ALGAPI
- 
-@@ -85,7 +85,7 @@ config CRYPTO_SKCIPHER2
- 	select CRYPTO_RNG2
- 
- config CRYPTO_HASH
--	tristate
-+	tristate "HASH"
- 	select CRYPTO_HASH2
- 	select CRYPTO_ALGAPI
- 
-@@ -94,7 +94,7 @@ config CRYPTO_HASH2
- 	select CRYPTO_ALGAPI2
- 
- config CRYPTO_RNG
--	tristate
-+	tristate "RNG"
- 	select CRYPTO_RNG2
- 	select CRYPTO_ALGAPI
- 
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -16,6 +16,7 @@ if BCMA
- # Support for Block-I/O. SELECT this from the driver that needs it.
- config BCMA_BLOCKIO
- 	bool
-+	default y
- 
- config BCMA_HOST_PCI_POSSIBLE
- 	bool
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -29,6 +29,7 @@ config SSB_SPROM
- config SSB_BLOCKIO
- 	bool
- 	depends on SSB
-+	default y
- 
- config SSB_PCIHOST_POSSIBLE
- 	bool
-@@ -49,7 +50,7 @@ config SSB_PCIHOST
- config SSB_B43_PCI_BRIDGE
- 	bool
- 	depends on SSB_PCIHOST
--	default n
-+	default y
- 
- config SSB_PCMCIAHOST_POSSIBLE
- 	bool
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -457,16 +457,16 @@ config BCH_CONST_T
- # Textsearch support is select'ed if needed
- #
- config TEXTSEARCH
--	bool
-+	bool "Textsearch support"
- 
- config TEXTSEARCH_KMP
--	tristate
-+	tristate "Textsearch KMP"
- 
- config TEXTSEARCH_BM
--	tristate
-+	tristate "Textsearch BM"
- 
- config TEXTSEARCH_FSM
--	tristate
-+	tristate "Textsearch FSM"
- 
- config BTREE
- 	bool
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -22,7 +22,7 @@ config NETFILTER_SKIP_EGRESS
- 	def_bool NETFILTER_EGRESS && (NET_CLS_ACT || IFB)
- 
- config NETFILTER_NETLINK
--	tristate
-+	tristate "Netfilter NFNETLINK interface"
- 
- config NETFILTER_FAMILY_BRIDGE
- 	bool
---- a/sound/core/Kconfig
-+++ b/sound/core/Kconfig
-@@ -17,7 +17,7 @@ config SND_DMAENGINE_PCM
- 	tristate
- 
- config SND_HWDEP
--	tristate
-+	tristate "Sound hardware support"
- 
- config SND_SEQ_DEVICE
- 	tristate
-@@ -27,7 +27,7 @@ config SND_RAWMIDI
- 	select SND_SEQ_DEVICE if SND_SEQUENCER != n
- 
- config SND_COMPRESS_OFFLOAD
--	tristate
-+	tristate "Compression offloading support"
- 
- config SND_JACK
- 	bool
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -430,7 +430,7 @@ config NET_DEVLINK
- 	default n
- 
- config PAGE_POOL
--	bool
-+	bool "Page pool support"
- 
- config PAGE_POOL_STATS
- 	default n
diff --git a/target/linux/generic/hack-6.1/253-ksmbd-config.patch b/target/linux/generic/hack-6.1/253-ksmbd-config.patch
deleted file mode 100644
index c968daf081c7..000000000000
--- a/target/linux/generic/hack-6.1/253-ksmbd-config.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From dcd966fa7ca63f38cf7147e1184d13d66e2ca340 Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 13:33:30 +0200
-Subject: [PATCH] Kconfig: add tristate for OID and ASNI string
-
----
- init/Kconfig | 2 +-
- lib/Kconfig  | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -2017,7 +2017,7 @@ config PADATA
- 	bool
- 
- config ASN1
--	tristate
-+	tristate "ASN1"
- 	help
- 	  Build a simple ASN.1 grammar compiler that produces a bytecode output
- 	  that can be interpreted by the ASN.1 stream decoder and used to
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -637,7 +637,7 @@ config LIBFDT
- 	bool
- 
- config OID_REGISTRY
--	tristate
-+	tristate "OID"
- 	help
- 	  Enable fast lookup object identifier registry.
- 
diff --git a/target/linux/generic/hack-6.1/259-regmap_dynamic.patch b/target/linux/generic/hack-6.1/259-regmap_dynamic.patch
deleted file mode 100644
index 8d25f59ce282..000000000000
--- a/target/linux/generic/hack-6.1/259-regmap_dynamic.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-From 811d9e2268a62b830cfe93cd8bc929afcb8b198b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:12:38 +0200
-Subject: kernel: move regmap bloat out of the kernel image if it is only being used in modules
-
-lede-commit: 96f39119815028073583e4fca3a9c5fe9141e998
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/regmap/Kconfig  | 15 ++++++++++-----
- drivers/base/regmap/Makefile | 12 ++++++++----
- drivers/base/regmap/regmap.c |  3 +++
- include/linux/regmap.h       |  2 +-
- 4 files changed, 22 insertions(+), 10 deletions(-)
-
---- a/drivers/base/regmap/Kconfig
-+++ b/drivers/base/regmap/Kconfig
-@@ -4,10 +4,9 @@
- # subsystems should select the appropriate symbols.
- 
- config REGMAP
--	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SOUNDWIRE || REGMAP_SOUNDWIRE_MBQ || REGMAP_SCCB || REGMAP_I3C || REGMAP_SPI_AVMM || REGMAP_MDIO)
- 	select IRQ_DOMAIN if REGMAP_IRQ
- 	select MDIO_BUS if REGMAP_MDIO
--	bool
-+	tristate
- 
- config REGCACHE_COMPRESSED
- 	select LZO_COMPRESS
-@@ -15,53 +14,67 @@ config REGCACHE_COMPRESSED
- 	bool
- 
- config REGMAP_AC97
-+	select REGMAP
- 	tristate
- 
- config REGMAP_I2C
-+	select REGMAP
- 	tristate
- 	depends on I2C
- 
- config REGMAP_SLIMBUS
-+	select REGMAP
- 	tristate
- 	depends on SLIMBUS
- 
- config REGMAP_SPI
-+	select REGMAP
- 	tristate
- 	depends on SPI
- 
- config REGMAP_SPMI
-+	select REGMAP
- 	tristate
- 	depends on SPMI
- 
- config REGMAP_W1
-+	select REGMAP
- 	tristate
- 	depends on W1
- 
- config REGMAP_MDIO
-+	select REGMAP
- 	tristate
- 
- config REGMAP_MMIO
-+	select REGMAP
- 	tristate
- 
- config REGMAP_IRQ
-+	select REGMAP
- 	bool
- 
- config REGMAP_SOUNDWIRE
-+	select REGMAP
- 	tristate
- 	depends on SOUNDWIRE
- 
- config REGMAP_SOUNDWIRE_MBQ
-+	select REGMAP
- 	tristate
- 	depends on SOUNDWIRE
- 
- config REGMAP_SCCB
-+	select REGMAP
- 	tristate
- 	depends on I2C
- 
- config REGMAP_I3C
-+	select REGMAP
- 	tristate
- 	depends on I3C
- 
- config REGMAP_SPI_AVMM
-+	select REGMAP
- 	tristate
- 	depends on SPI
---- a/drivers/base/regmap/Makefile
-+++ b/drivers/base/regmap/Makefile
-@@ -2,10 +2,14 @@
- # For include/trace/define_trace.h to include trace.h
- CFLAGS_regmap.o := -I$(src)
- 
--obj-$(CONFIG_REGMAP) += regmap.o regcache.o
--obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
--obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
--obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
-+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o
-+ifdef CONFIG_DEBUG_FS
-+regmap-core-objs += regmap-debugfs.o
-+endif
-+ifdef CONFIG_REGCACHE_COMPRESSED
-+regmap-core-objs += regcache-lzo.o
-+endif
-+obj-$(CONFIG_REGMAP) += regmap-core.o
- obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
- obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
- obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o
---- a/drivers/base/regmap/regmap.c
-+++ b/drivers/base/regmap/regmap.c
-@@ -9,6 +9,7 @@
- #include <linux/device.h>
- #include <linux/slab.h>
- #include <linux/export.h>
-+#include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/property.h>
-@@ -3513,3 +3514,5 @@ static int __init regmap_initcall(void)
- 	return 0;
- }
- postcore_initcall(regmap_initcall);
-+
-+MODULE_LICENSE("GPL");
---- a/include/linux/regmap.h
-+++ b/include/linux/regmap.h
-@@ -180,7 +180,7 @@ struct reg_sequence {
- 	__ret ?: __tmp; \
- })
- 
--#ifdef CONFIG_REGMAP
-+#if IS_REACHABLE(CONFIG_REGMAP)
- 
- enum regmap_endian {
- 	/* Unspecified -> 0 -> Backwards compatible default */
diff --git a/target/linux/generic/hack-6.1/260-crypto_test_dependencies.patch b/target/linux/generic/hack-6.1/260-crypto_test_dependencies.patch
deleted file mode 100644
index 7ea517496e2a..000000000000
--- a/target/linux/generic/hack-6.1/260-crypto_test_dependencies.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From fd1799b0bf5efa46dd3e6dfbbf3955564807e508 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:12:51 +0200
-Subject: kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
-
-Reduces kernel size after LZMA by about 5k on MIPS
-
-lede-commit: 044c316167e076479a344c59905e5b435b84a77f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- crypto/Kconfig   | 13 ++++++-------
- crypto/algboss.c |  4 ++++
- 2 files changed, 10 insertions(+), 7 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -142,13 +142,13 @@ config CRYPTO_MANAGER
- 	  cbc(aes).
- 
- config CRYPTO_MANAGER2
--	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
--	select CRYPTO_AEAD2
--	select CRYPTO_HASH2
--	select CRYPTO_SKCIPHER2
--	select CRYPTO_AKCIPHER2
--	select CRYPTO_KPP2
--	select CRYPTO_ACOMP2
-+	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y && !CRYPTO_MANAGER_DISABLE_TESTS)
-+	select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_SKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_AKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_KPP2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+	select CRYPTO_ACOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS
- 
- config CRYPTO_USER
- 	tristate "Userspace cryptographic algorithm configuration"
---- a/crypto/algboss.c
-+++ b/crypto/algboss.c
-@@ -211,8 +211,12 @@ static int cryptomgr_schedule_test(struc
- 	type = alg->cra_flags;
- 
- 	/* Do not test internal algorithms. */
-+#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
-+	type |= CRYPTO_ALG_TESTED;
-+#else
- 	if (type & CRYPTO_ALG_INTERNAL)
- 		type |= CRYPTO_ALG_TESTED;
-+#endif
- 
- 	param->type = type;
- 
diff --git a/target/linux/generic/hack-6.1/261-lib-arc4-unhide.patch b/target/linux/generic/hack-6.1/261-lib-arc4-unhide.patch
deleted file mode 100644
index 01829b2d51ef..000000000000
--- a/target/linux/generic/hack-6.1/261-lib-arc4-unhide.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 241e5d3f7b0dd3c01f8c7fa83cbc9a3882286d53 Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 13:35:18 +0200
-Subject: [PATCH] lib/crypto: add tristate string for ARC4
-
-This makes it possible to select CONFIG_CRYPTO_LIB_ARC4 directly. We 
-need this to be able to compile this into the kernel and make use of it 
-from backports.
-
----
- lib/crypto/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/lib/crypto/Kconfig
-+++ b/lib/crypto/Kconfig
-@@ -9,7 +9,7 @@ config CRYPTO_LIB_AES
- 	tristate
- 
- config CRYPTO_LIB_ARC4
--	tristate
-+	tristate "ARC4 cipher library"
- 
- config CRYPTO_ARCH_HAVE_LIB_BLAKE2S
- 	bool
diff --git a/target/linux/generic/hack-6.1/280-rfkill-stubs.patch b/target/linux/generic/hack-6.1/280-rfkill-stubs.patch
deleted file mode 100644
index 7a650d132eb3..000000000000
--- a/target/linux/generic/hack-6.1/280-rfkill-stubs.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 236c1acdfef5958010ac9814a9872e0a46fd78ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:13:44 +0200
-Subject: rfkill: add fake rfkill support
-
-allow building of modules depending on RFKILL even if RFKILL is not enabled.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- include/linux/rfkill.h |  2 +-
- net/Makefile           |  2 +-
- net/rfkill/Kconfig     | 14 +++++++++-----
- net/rfkill/Makefile    |  2 +-
- 4 files changed, 12 insertions(+), 8 deletions(-)
-
---- a/include/linux/rfkill.h
-+++ b/include/linux/rfkill.h
-@@ -64,7 +64,7 @@ struct rfkill_ops {
- 	int	(*set_block)(void *data, bool blocked);
- };
- 
--#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-+#if defined(CONFIG_RFKILL_FULL) || defined(CONFIG_RFKILL_FULL_MODULE)
- /**
-  * rfkill_alloc - Allocate rfkill structure
-  * @name: name of the struct -- the string is not copied internally
---- a/net/Makefile
-+++ b/net/Makefile
-@@ -52,7 +52,7 @@ obj-$(CONFIG_TIPC)		+= tipc/
- obj-$(CONFIG_NETLABEL)		+= netlabel/
- obj-$(CONFIG_IUCV)		+= iucv/
- obj-$(CONFIG_SMC)		+= smc/
--obj-$(CONFIG_RFKILL)		+= rfkill/
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill/
- obj-$(CONFIG_NET_9P)		+= 9p/
- obj-$(CONFIG_CAIF)		+= caif/
- obj-$(CONFIG_DCB)		+= dcb/
---- a/net/rfkill/Kconfig
-+++ b/net/rfkill/Kconfig
-@@ -2,7 +2,11 @@
- #
- # RF switch subsystem configuration
- #
--menuconfig RFKILL
-+config RFKILL
-+	bool
-+	default y
-+
-+menuconfig RFKILL_FULL
- 	tristate "RF switch subsystem support"
- 	help
- 	  Say Y here if you want to have control over RF switches
-@@ -14,19 +18,19 @@ menuconfig RFKILL
- # LED trigger support
- config RFKILL_LEDS
- 	bool
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS
- 	default y
- 
- config RFKILL_INPUT
- 	bool "RF switch input support" if EXPERT
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on INPUT = y || RFKILL = INPUT
- 	default y if !EXPERT
- 
- config RFKILL_GPIO
- 	tristate "GPIO RFKILL driver"
--	depends on RFKILL
-+	depends on RFKILL_FULL
- 	depends on GPIOLIB || COMPILE_TEST
- 	default n
- 	help
---- a/net/rfkill/Makefile
-+++ b/net/rfkill/Makefile
-@@ -5,5 +5,5 @@
- 
- rfkill-y			+= core.o
- rfkill-$(CONFIG_RFKILL_INPUT)	+= input.o
--obj-$(CONFIG_RFKILL)		+= rfkill.o
-+obj-$(CONFIG_RFKILL_FULL)	+= rfkill.o
- obj-$(CONFIG_RFKILL_GPIO)	+= rfkill-gpio.o
diff --git a/target/linux/generic/hack-6.1/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch b/target/linux/generic/hack-6.1/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
deleted file mode 100644
index f21f200136f0..000000000000
--- a/target/linux/generic/hack-6.1/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Date: Fri, 7 Jun 2013 18:35:22 -0500
-Subject: MIPS: r4k_cache: use more efficient cache blast
-
-Optimize the compiler output for larger cache blast cases that are
-common for DMA-based networking.
-
-Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -286,14 +286,46 @@ static inline void prot##extra##blast_##
- 						    unsigned long end)	\
- {									\
- 	unsigned long lsize = cpu_##desc##_line_size();			\
-+	unsigned long lsize_2 = lsize * 2;				\
-+	unsigned long lsize_3 = lsize * 3;				\
-+	unsigned long lsize_4 = lsize * 4;				\
-+	unsigned long lsize_5 = lsize * 5;				\
-+	unsigned long lsize_6 = lsize * 6;				\
-+	unsigned long lsize_7 = lsize * 7;				\
-+	unsigned long lsize_8 = lsize * 8;				\
- 	unsigned long addr = start & ~(lsize - 1);			\
--	unsigned long aend = (end - 1) & ~(lsize - 1);			\
-+	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
-+	int lines = (aend - addr) / lsize;				\
- 									\
--	while (1) {							\
-+	while (lines >= 8) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		prot##cache_op(hitop, addr + lsize_4);			\
-+		prot##cache_op(hitop, addr + lsize_5);			\
-+		prot##cache_op(hitop, addr + lsize_6);			\
-+		prot##cache_op(hitop, addr + lsize_7);			\
-+		addr += lsize_8;					\
-+		lines -= 8;						\
-+	}								\
-+									\
-+	if (lines & 0x4) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		prot##cache_op(hitop, addr + lsize_2);			\
-+		prot##cache_op(hitop, addr + lsize_3);			\
-+		addr += lsize_4;					\
-+	}								\
-+									\
-+	if (lines & 0x2) {						\
-+		prot##cache_op(hitop, addr);				\
-+		prot##cache_op(hitop, addr + lsize);			\
-+		addr += lsize_2;					\
-+	}								\
-+									\
-+	if (lines & 0x1) {						\
- 		prot##cache_op(hitop, addr);				\
--		if (addr == aend)					\
--			break;						\
--		addr += lsize;						\
- 	}								\
- }
- 
diff --git a/target/linux/generic/hack-6.1/402-mtd-blktrans-call-add-disks-after-mtd-device.patch b/target/linux/generic/hack-6.1/402-mtd-blktrans-call-add-disks-after-mtd-device.patch
deleted file mode 100644
index a87b41370e99..000000000000
--- a/target/linux/generic/hack-6.1/402-mtd-blktrans-call-add-disks-after-mtd-device.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From 0bccc3722bdd88e8ae995e77ef9f7b77ee4cbdee Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 7 Apr 2021 22:45:54 +0100
-Subject: [PATCH 2/2] mtd: blktrans: call add disks after mtd device
-To: linux-mtd@lists.infradead.org
-Cc: Vignesh Raghavendra <vigneshr@ti.com>,
-    Richard Weinberger <richard@nod.at>,
-    Miquel Raynal <miquel.raynal@bootlin.com>,
-    David Woodhouse <dwmw2@infradead.org>
-
-Calling device_add_disk while holding mtd_table_mutex leads
-to deadlock in case part_bits!=0 as block partition parsers
-will try to open the newly created disks, trying to acquire
-mutex once again.
-Move device_add_disk to additional function called after
-add partitions of an MTD device have been added and locks
-have been released.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/mtd_blkdevs.c    | 33 ++++++++++++++++++++++++++-------
- drivers/mtd/mtdcore.c        |  3 +++
- include/linux/mtd/blktrans.h |  1 +
- 3 files changed, 30 insertions(+), 7 deletions(-)
-
---- a/drivers/mtd/mtd_blkdevs.c
-+++ b/drivers/mtd/mtd_blkdevs.c
-@@ -386,19 +386,8 @@ int add_mtd_blktrans_dev(struct mtd_blkt
- 	if (new->readonly)
- 		set_disk_ro(gd, 1);
- 
--	ret = device_add_disk(&new->mtd->dev, gd, NULL);
--	if (ret)
--		goto out_cleanup_disk;
--
--	if (new->disk_attributes) {
--		ret = sysfs_create_group(&disk_to_dev(gd)->kobj,
--					new->disk_attributes);
--		WARN_ON(ret);
--	}
- 	return 0;
- 
--out_cleanup_disk:
--	put_disk(new->disk);
- out_free_tag_set:
- 	blk_mq_free_tag_set(new->tag_set);
- out_kfree_tag_set:
-@@ -408,6 +397,35 @@ out_list_del:
- 	return ret;
- }
- 
-+void register_mtd_blktrans_devs(void)
-+{
-+	struct mtd_blktrans_ops *tr;
-+	struct mtd_blktrans_dev *dev, *next;
-+	int ret;
-+
-+	list_for_each_entry(tr, &blktrans_majors, list) {
-+		list_for_each_entry_safe(dev, next, &tr->devs, list) {
-+			if (disk_live(dev->disk))
-+				continue;
-+
-+			ret = device_add_disk(&dev->mtd->dev, dev->disk, NULL);
-+			if (ret)
-+				goto out_cleanup_disk;
-+
-+			if (dev->disk_attributes) {
-+				ret = sysfs_create_group(&disk_to_dev(dev->disk)->kobj,
-+							dev->disk_attributes);
-+				WARN_ON(ret);
-+			}
-+		}
-+	}
-+
-+	return;
-+
-+out_cleanup_disk:
-+	put_disk(dev->disk);
-+}
-+
- int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old)
- {
- 	unsigned long flags;
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -32,6 +32,7 @@
- 
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/mtd/blktrans.h>
- 
- #include "mtdcore.h"
- 
-@@ -1100,6 +1101,8 @@ int mtd_device_parse_register(struct mtd
- 		register_reboot_notifier(&mtd->reboot_notifier);
- 	}
- 
-+	register_mtd_blktrans_devs();
-+
- out:
- 	if (ret) {
- 		nvmem_unregister(mtd->otp_user_nvmem);
---- a/include/linux/mtd/blktrans.h
-+++ b/include/linux/mtd/blktrans.h
-@@ -76,6 +76,7 @@ extern int deregister_mtd_blktrans(struc
- extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
- extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
- extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev);
-+extern void register_mtd_blktrans_devs(void);
- 
- /**
-  * module_mtd_blktrans() - Helper macro for registering a mtd blktrans driver
diff --git a/target/linux/generic/hack-6.1/420-mtd-support-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch b/target/linux/generic/hack-6.1/420-mtd-support-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch
deleted file mode 100644
index 7c7e4c814e61..000000000000
--- a/target/linux/generic/hack-6.1/420-mtd-support-OpenWrt-s-MTD_ROOTFS_ROOT_DEV.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 7 Nov 2022 23:48:24 +0100
-Subject: [PATCH] mtd: support OpenWrt's MTD_ROOTFS_ROOT_DEV
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows setting ROOT_DEV to MTD partition named "rootfs".
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -773,7 +773,8 @@ int add_mtd_device(struct mtd_info *mtd)
- 
- 	mutex_unlock(&mtd_table_mutex);
- 
--	if (of_find_property(mtd_get_of_node(mtd), "linux,rootfs", NULL)) {
-+	if (of_find_property(mtd_get_of_node(mtd), "linux,rootfs", NULL) ||
-+	    (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) && !strcmp(mtd->name, "rootfs") && ROOT_DEV == 0)) {
- 		if (IS_BUILTIN(CONFIG_MTD)) {
- 			pr_info("mtd: setting mtd%d (%s) as root device\n", mtd->index, mtd->name);
- 			ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
diff --git a/target/linux/generic/hack-6.1/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch b/target/linux/generic/hack-6.1/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch
deleted file mode 100644
index 965a331a1905..000000000000
--- a/target/linux/generic/hack-6.1/421-drivers-mtd-parsers-add-nvmem-support-to-cmdlinepart.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 6fa9e3678eb002246df1280322b6a024853950a5 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Mon, 11 Oct 2021 00:53:14 +0200
-Subject: [PATCH] drivers: mtd: parsers: add nvmem support to cmdlinepart
-
-Assuming cmdlinepart is only one level deep partition scheme and that
-static partition are also defined in DTS, we can assign an of_node for
-partition declared from bootargs. cmdlinepart have priority than
-fiexed-partition parser so in this specific case the parser doesn't
-assign an of_node. Fix this by searching a defined of_node using a
-similar fixed_partition parser and if a partition is found with the same
-label, check that it has the same offset and size and return the DT
-of_node to correctly use NVMEM cells.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
----
- drivers/mtd/parsers/cmdlinepart.c | 71 +++++++++++++++++++++++++++++++
- 1 file changed, 71 insertions(+)
-
---- a/drivers/mtd/parsers/cmdlinepart.c
-+++ b/drivers/mtd/parsers/cmdlinepart.c
-@@ -43,6 +43,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/module.h>
- #include <linux/err.h>
-+#include <linux/of.h>
- 
- /* debug macro */
- #if 0
-@@ -323,6 +324,68 @@ static int mtdpart_setup_real(char *s)
- 	return 0;
- }
- 
-+static int search_fixed_partition(struct mtd_info *master,
-+				  struct mtd_partition *target_part,
-+				  struct mtd_partition *fixed_part)
-+{
-+	struct device_node *mtd_node;
-+	struct device_node *ofpart_node;
-+	struct device_node *pp;
-+	struct mtd_partition part;
-+	const char *partname;
-+
-+	mtd_node = mtd_get_of_node(master);
-+	if (!mtd_node)
-+		return -EINVAL;
-+
-+	ofpart_node = of_get_child_by_name(mtd_node, "partitions");
-+
-+	for_each_child_of_node(ofpart_node,  pp) {
-+		const __be32 *reg;
-+		int len;
-+		int a_cells, s_cells;
-+
-+		reg = of_get_property(pp, "reg", &len);
-+		if (!reg) {
-+			pr_debug("%s: ofpart partition %pOF (%pOF) missing reg property.\n",
-+				 master->name, pp,
-+				 mtd_node);
-+			continue;
-+		}
-+
-+		a_cells = of_n_addr_cells(pp);
-+		s_cells = of_n_size_cells(pp);
-+		if (len / 4 != a_cells + s_cells) {
-+			pr_debug("%s: ofpart partition %pOF (%pOF) error parsing reg property.\n",
-+				 master->name, pp,
-+				 mtd_node);
-+			continue;
-+		}
-+
-+		part.offset = of_read_number(reg, a_cells);
-+		part.size = of_read_number(reg + a_cells, s_cells);
-+		part.of_node = pp;
-+
-+		partname = of_get_property(pp, "label", &len);
-+		if (!partname)
-+			partname = of_get_property(pp, "name", &len);
-+		part.name = partname;
-+
-+		if (!strncmp(target_part->name, part.name, len)) {
-+			if (part.offset != target_part->offset)
-+				return -EINVAL;
-+
-+			if (part.size != target_part->size)
-+				return -EINVAL;
-+
-+			memcpy(fixed_part, &part, sizeof(struct mtd_partition));
-+			return 0;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+
- /*
-  * Main function to be called from the MTD mapping driver/device to
-  * obtain the partitioning information. At this point the command line
-@@ -338,6 +401,7 @@ static int parse_cmdline_partitions(stru
- 	int i, err;
- 	struct cmdline_mtd_partition *part;
- 	const char *mtd_id = master->name;
-+	struct mtd_partition fixed_part;
- 
- 	/* parse command line */
- 	if (!cmdline_parsed) {
-@@ -382,6 +446,13 @@ static int parse_cmdline_partitions(stru
- 				sizeof(*part->parts) * (part->num_parts - i));
- 			i--;
- 		}
-+
-+		err = search_fixed_partition(master, &part->parts[i], &fixed_part);
-+		if (!err) {
-+			part->parts[i].of_node = fixed_part.of_node;
-+			pr_info("Found partition defined in DT for %s. Assigning OF node to support nvmem.",
-+				part->parts[i].name);
-+		}
- 	}
- 
- 	*pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts,
diff --git a/target/linux/generic/hack-6.1/430-mtk-bmt-support.patch b/target/linux/generic/hack-6.1/430-mtk-bmt-support.patch
deleted file mode 100644
index 1e69ee644600..000000000000
--- a/target/linux/generic/hack-6.1/430-mtk-bmt-support.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From ac84397efb3b3868c71c10ad7521161773228a17 Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 13:41:44 +0200
-Subject: [PATCH] mtd/nand: add MediaTek NAND bad block managment table
-
----
- drivers/mtd/nand/Kconfig  | 4 ++++
- drivers/mtd/nand/Makefile | 1 +
- 2 files changed, 5 insertions(+)
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -46,6 +46,10 @@ config MTD_NAND_ECC_SW_BCH
- 	  ECC codes. They are used with NAND devices requiring more than 1 bit
- 	  of error correction.
- 
-+config MTD_NAND_MTK_BMT
-+	bool "Support MediaTek NAND Bad-block Management Table"
-+	default n
-+
- config MTD_NAND_ECC_MXIC
- 	bool "Macronix external hardware ECC engine"
- 	depends on HAS_IOMEM
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -3,6 +3,7 @@
- nandcore-objs := core.o bbt.o
- obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
- obj-$(CONFIG_MTD_NAND_ECC_MEDIATEK) += ecc-mtk.o
-+obj-$(CONFIG_MTD_NAND_MTK_BMT)	+= mtk_bmt.o mtk_bmt_v2.o mtk_bmt_bbt.o mtk_bmt_nmbm.o
- 
- obj-y	+= onenand/
- obj-y	+= raw/
diff --git a/target/linux/generic/hack-6.1/600-net-enable-fraglist-GRO-by-default.patch b/target/linux/generic/hack-6.1/600-net-enable-fraglist-GRO-by-default.patch
deleted file mode 100644
index 51f990039ca3..000000000000
--- a/target/linux/generic/hack-6.1/600-net-enable-fraglist-GRO-by-default.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 23 Apr 2024 12:35:21 +0200
-Subject: [PATCH] net: enable fraglist GRO by default
-
-This can significantly improve performance for packet forwarding/bridging
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/netdev_features.h
-+++ b/include/linux/netdev_features.h
-@@ -242,10 +242,10 @@ static inline int find_next_netdev_featu
- #define NETIF_F_UPPER_DISABLES	NETIF_F_LRO
- 
- /* changeable features with no special hardware requirements */
--#define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO | NETIF_F_GRO)
-+#define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST)
- 
- /* Changeable features with no special hardware requirements that defaults to off. */
--#define NETIF_F_SOFT_FEATURES_OFF	(NETIF_F_GRO_FRAGLIST | NETIF_F_GRO_UDP_FWD)
-+#define NETIF_F_SOFT_FEATURES_OFF	(NETIF_F_GRO_UDP_FWD)
- 
- #define NETIF_F_VLAN_FEATURES	(NETIF_F_HW_VLAN_CTAG_FILTER | \
- 				 NETIF_F_HW_VLAN_CTAG_RX | \
diff --git a/target/linux/generic/hack-6.1/645-netfilter-connmark-introduce-set-dscpmark.patch b/target/linux/generic/hack-6.1/645-netfilter-connmark-introduce-set-dscpmark.patch
deleted file mode 100644
index 444f8edfea7c..000000000000
--- a/target/linux/generic/hack-6.1/645-netfilter-connmark-introduce-set-dscpmark.patch
+++ /dev/null
@@ -1,214 +0,0 @@
-From eda40b8c8c82e0f2789d6bc8bf63846dce2e8f32 Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Sat, 23 Mar 2019 09:29:49 +0000
-Subject: [PATCH] netfilter: connmark: introduce set-dscpmark
-
-set-dscpmark is a method of storing the DSCP of an ip packet into
-conntrack mark.  In combination with a suitable tc filter action
-(act_ctinfo) DSCP values are able to be stored in the mark on egress and
-restored on ingress across links that otherwise alter or bleach DSCP.
-
-This is useful for qdiscs such as CAKE which are able to shape according
-to policies based on DSCP.
-
-Ingress classification is traditionally a challenging task since
-iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
-lookups, hence are unable to see internal IPv4 addresses as used on the
-typical home masquerading gateway.
-
-x_tables CONNMARK set-dscpmark target solves the problem of storing the
-DSCP to the conntrack mark in a way suitable for the new act_ctinfo tc
-action to restore.
-
-The set-dscpmark option accepts 2 parameters, a 32bit 'dscpmask' and a
-32bit 'statemask'.  The dscp mask must be 6 contiguous bits and
-represents the area where the DSCP will be stored in the connmark.  The
-state mask is a minimum 1 bit length mask that must not overlap with the
-dscpmask.  It represents a flag which is set when the DSCP has been
-stored in the conntrack mark. This is useful to implement a 'one shot'
-iptables based classification where the 'complicated' iptables rules are
-only run once to classify the connection on initial (egress) packet and
-subsequent packets are all marked/restored with the same DSCP.  A state
-mask of zero disables the setting of a status bit/s.
-
-example syntax with a suitably modified iptables user space application:
-
-iptables -A QOS_MARK_eth0 -t mangle -j CONNMARK --set-dscpmark 0xfc000000/0x01000000
-
-Would store the DSCP in the top 6 bits of the 32bit mark field, and use
-the LSB of the top byte as the 'DSCP has been stored' marker.
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP       | unused | flag  |unused   |
-|-----------------------0x01---000000---|
-      ^                   ^
-      |                   |
-      ---|             Conditional flag
-         |             set this when dscp
-|-ip diffserv-|        stored in mark
-| 6 bits      |
-|-------------|
-
-an identically configured tc action to restore looks like:
-
-tc filter show dev eth0 ingress
-filter parent ffff: protocol all pref 10 u32 chain 0
-filter parent ffff: protocol all pref 10 u32 chain 0 fh 800: ht divisor 1
-filter parent ffff: protocol all pref 10 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1: not_in_hw
-  match 00000000/00000000 at 0
-	action order 1: ctinfo zone 0 pipe
-	 index 2 ref 1 bind 1 dscp 0xfc000000/0x1000000
-
-	action order 2: mirred (Egress Redirect to device ifb4eth0) stolen
-	index 1 ref 1 bind 1
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP       | unused | flag  |unused   |
-|-----------------------0x01---000000---|
-      |                   |
-      |                   |
-      ---|             Conditional flag
-         v             only restore if set
-|-ip diffserv-|
-| 6 bits      |
-|-------------|
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- include/uapi/linux/netfilter/xt_connmark.h | 10 ++++
- net/netfilter/xt_connmark.c                | 55 ++++++++++++++++++----
- 2 files changed, 57 insertions(+), 8 deletions(-)
-
---- a/include/uapi/linux/netfilter/xt_connmark.h
-+++ b/include/uapi/linux/netfilter/xt_connmark.h
-@@ -15,6 +15,11 @@ enum {
- };
- 
- enum {
-+	XT_CONNMARK_VALUE =	(1 << 0),
-+	XT_CONNMARK_DSCP = 	(1 << 1)
-+};
-+
-+enum {
- 	D_SHIFT_LEFT = 0,
- 	D_SHIFT_RIGHT,
- };
-@@ -29,6 +34,11 @@ struct xt_connmark_tginfo2 {
- 	__u8 shift_dir, shift_bits, mode;
- };
- 
-+struct xt_connmark_tginfo3 {
-+	__u32 ctmark, ctmask, nfmask;
-+	__u8 shift_dir, shift_bits, mode, func;
-+};
-+
- struct xt_connmark_mtinfo1 {
- 	__u32 mark, mask;
- 	__u8 invert;
---- a/net/netfilter/xt_connmark.c
-+++ b/net/netfilter/xt_connmark.c
-@@ -24,13 +24,13 @@ MODULE_ALIAS("ipt_connmark");
- MODULE_ALIAS("ip6t_connmark");
- 
- static unsigned int
--connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo2 *info)
-+connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo3 *info)
- {
- 	enum ip_conntrack_info ctinfo;
- 	u_int32_t new_targetmark;
- 	struct nf_conn *ct;
- 	u_int32_t newmark;
--	u_int32_t oldmark;
-+	u_int8_t dscp;
- 
- 	ct = nf_ct_get(skb, &ctinfo);
- 	if (ct == NULL)
-@@ -38,13 +38,24 @@ connmark_tg_shift(struct sk_buff *skb, c
- 
- 	switch (info->mode) {
- 	case XT_CONNMARK_SET:
--		oldmark = READ_ONCE(ct->mark);
--		newmark = (oldmark & ~info->ctmask) ^ info->ctmark;
--		if (info->shift_dir == D_SHIFT_RIGHT)
--			newmark >>= info->shift_bits;
--		else
--			newmark <<= info->shift_bits;
-+		newmark = READ_ONCE(ct->mark);
-+		if (info->func & XT_CONNMARK_VALUE) {
-+			newmark = (newmark & ~info->ctmask) ^ info->ctmark;
-+			if (info->shift_dir == D_SHIFT_RIGHT)
-+				newmark >>= info->shift_bits;
-+			else
-+				newmark <<= info->shift_bits;
-+		} else if (info->func & XT_CONNMARK_DSCP) {
-+			if (skb->protocol == htons(ETH_P_IP))
-+				dscp = ipv4_get_dsfield(ip_hdr(skb)) >> 2;
-+			else if (skb->protocol == htons(ETH_P_IPV6))
-+				dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> 2;
-+			else	/* protocol doesn't have diffserv */
-+				break;
- 
-+			newmark = (newmark & ~info->ctmark) |
-+				  (info->ctmask | (dscp << info->shift_bits));
-+		}
- 		if (READ_ONCE(ct->mark) != newmark) {
- 			WRITE_ONCE(ct->mark, newmark);
- 			nf_conntrack_event_cache(IPCT_MARK, ct);
-@@ -83,20 +94,36 @@ static unsigned int
- connmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
- {
- 	const struct xt_connmark_tginfo1 *info = par->targinfo;
--	const struct xt_connmark_tginfo2 info2 = {
-+	const struct xt_connmark_tginfo3 info3 = {
- 		.ctmark	= info->ctmark,
- 		.ctmask	= info->ctmask,
- 		.nfmask	= info->nfmask,
- 		.mode	= info->mode,
-+		.func	= XT_CONNMARK_VALUE
- 	};
- 
--	return connmark_tg_shift(skb, &info2);
-+	return connmark_tg_shift(skb, &info3);
- }
- 
- static unsigned int
- connmark_tg_v2(struct sk_buff *skb, const struct xt_action_param *par)
- {
- 	const struct xt_connmark_tginfo2 *info = par->targinfo;
-+	const struct xt_connmark_tginfo3 info3 = {
-+		.ctmark	= info->ctmark,
-+		.ctmask	= info->ctmask,
-+		.nfmask	= info->nfmask,
-+		.mode	= info->mode,
-+		.func	= XT_CONNMARK_VALUE
-+	};
-+
-+	return connmark_tg_shift(skb, &info3);
-+}
-+
-+static unsigned int
-+connmark_tg_v3(struct sk_buff *skb, const struct xt_action_param *par)
-+{
-+	const struct xt_connmark_tginfo3 *info = par->targinfo;
- 
- 	return connmark_tg_shift(skb, info);
- }
-@@ -167,6 +194,16 @@ static struct xt_target connmark_tg_reg[
- 		.targetsize     = sizeof(struct xt_connmark_tginfo2),
- 		.destroy        = connmark_tg_destroy,
- 		.me             = THIS_MODULE,
-+	},
-+	{
-+		.name           = "CONNMARK",
-+		.revision       = 3,
-+		.family         = NFPROTO_UNSPEC,
-+		.checkentry     = connmark_tg_check,
-+		.target         = connmark_tg_v3,
-+		.targetsize     = sizeof(struct xt_connmark_tginfo3),
-+		.destroy        = connmark_tg_destroy,
-+		.me             = THIS_MODULE,
- 	}
- };
- 
diff --git a/target/linux/generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch b/target/linux/generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch
deleted file mode 100644
index 0822b1a2ddeb..000000000000
--- a/target/linux/generic/hack-6.1/650-netfilter-add-xt_FLOWOFFLOAD-target.patch
+++ /dev/null
@@ -1,812 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 20 Feb 2018 15:56:02 +0100
-Subject: [PATCH] netfilter: add xt_FLOWOFFLOAD target
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- create mode 100644 net/netfilter/xt_OFFLOAD.c
-
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -726,7 +726,6 @@ config NF_FLOW_TABLE
- 	tristate "Netfilter flow table module"
- 	depends on NETFILTER_INGRESS
- 	depends on NF_CONNTRACK
--	depends on NF_TABLES
- 	help
- 	  This option adds the flow table core infrastructure.
- 
-@@ -1023,6 +1022,15 @@ config NETFILTER_XT_TARGET_NOTRACK
- 	depends on NETFILTER_ADVANCED
- 	select NETFILTER_XT_TARGET_CT
- 
-+config NETFILTER_XT_TARGET_FLOWOFFLOAD
-+	tristate '"FLOWOFFLOAD" target support'
-+	depends on NF_FLOW_TABLE
-+	depends on NETFILTER_INGRESS
-+	help
-+	  This option adds a `FLOWOFFLOAD' target, which uses the nf_flow_offload
-+	  module to speed up processing of packets by bypassing the usual
-+	  netfilter chains
-+
- config NETFILTER_XT_TARGET_RATEEST
- 	tristate '"RATEEST" target support'
- 	depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -154,6 +154,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIF
- obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
-+obj-$(CONFIG_NETFILTER_XT_TARGET_FLOWOFFLOAD) += xt_FLOWOFFLOAD.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HMARK) += xt_HMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
---- /dev/null
-+++ b/net/netfilter/xt_FLOWOFFLOAD.c
-@@ -0,0 +1,703 @@
-+/*
-+ * Copyright (C) 2018-2021 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/netfilter.h>
-+#include <linux/netfilter/xt_FLOWOFFLOAD.h>
-+#include <linux/if_vlan.h>
-+#include <net/ip.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_helper.h>
-+#include <net/netfilter/nf_flow_table.h>
-+
-+struct xt_flowoffload_hook {
-+	struct hlist_node list;
-+	struct nf_hook_ops ops;
-+	struct net *net;
-+	bool registered;
-+	bool used;
-+};
-+
-+struct xt_flowoffload_table {
-+	struct nf_flowtable ft;
-+	struct hlist_head hooks;
-+	struct delayed_work work;
-+};
-+
-+struct nf_forward_info {
-+	const struct net_device *indev;
-+	const struct net_device *outdev;
-+	const struct net_device *hw_outdev;
-+	struct id {
-+		__u16	id;
-+		__be16	proto;
-+	} encap[NF_FLOW_TABLE_ENCAP_MAX];
-+	u8 num_encaps;
-+	u8 ingress_vlans;
-+	u8 h_source[ETH_ALEN];
-+	u8 h_dest[ETH_ALEN];
-+	enum flow_offload_xmit_type xmit_type;
-+};
-+
-+static DEFINE_SPINLOCK(hooks_lock);
-+
-+struct xt_flowoffload_table flowtable[2];
-+
-+static unsigned int
-+xt_flowoffload_net_hook(void *priv, struct sk_buff *skb,
-+			const struct nf_hook_state *state)
-+{
-+	struct vlan_ethhdr *veth;
-+	__be16 proto;
-+
-+	switch (skb->protocol) {
-+	case htons(ETH_P_8021Q):
-+		veth = (struct vlan_ethhdr *)skb_mac_header(skb);
-+		proto = veth->h_vlan_encapsulated_proto;
-+		break;
-+	case htons(ETH_P_PPP_SES):
-+		if (!nf_flow_pppoe_proto(skb, &proto))
-+			return NF_ACCEPT;
-+		break;
-+	default:
-+		proto = skb->protocol;
-+		break;
-+	}
-+
-+	switch (proto) {
-+	case htons(ETH_P_IP):
-+		return nf_flow_offload_ip_hook(priv, skb, state);
-+	case htons(ETH_P_IPV6):
-+		return nf_flow_offload_ipv6_hook(priv, skb, state);
-+	}
-+
-+	return NF_ACCEPT;
-+}
-+
-+static int
-+xt_flowoffload_create_hook(struct xt_flowoffload_table *table,
-+			   struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+	struct nf_hook_ops *ops;
-+
-+	hook = kzalloc(sizeof(*hook), GFP_ATOMIC);
-+	if (!hook)
-+		return -ENOMEM;
-+
-+	ops = &hook->ops;
-+	ops->pf = NFPROTO_NETDEV;
-+	ops->hooknum = NF_NETDEV_INGRESS;
-+	ops->priority = 10;
-+	ops->priv = &table->ft;
-+	ops->hook = xt_flowoffload_net_hook;
-+	ops->dev = dev;
-+
-+	hlist_add_head(&hook->list, &table->hooks);
-+	mod_delayed_work(system_power_efficient_wq, &table->work, 0);
-+
-+	return 0;
-+}
-+
-+static struct xt_flowoffload_hook *
-+flow_offload_lookup_hook(struct xt_flowoffload_table *table,
-+			 struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+	hlist_for_each_entry(hook, &table->hooks, list) {
-+		if (hook->ops.dev == dev)
-+			return hook;
-+	}
-+
-+	return NULL;
-+}
-+
-+static void
-+xt_flowoffload_check_device(struct xt_flowoffload_table *table,
-+			    struct net_device *dev)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+	if (!dev)
-+		return;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hook = flow_offload_lookup_hook(table, dev);
-+	if (hook)
-+		hook->used = true;
-+	else
-+		xt_flowoffload_create_hook(table, dev);
-+	spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_register_hooks(struct xt_flowoffload_table *table)
-+{
-+	struct xt_flowoffload_hook *hook;
-+
-+restart:
-+	hlist_for_each_entry(hook, &table->hooks, list) {
-+		if (hook->registered)
-+			continue;
-+
-+		hook->registered = true;
-+		hook->net = dev_net(hook->ops.dev);
-+		spin_unlock_bh(&hooks_lock);
-+		nf_register_net_hook(hook->net, &hook->ops);
-+		if (table->ft.flags & NF_FLOWTABLE_HW_OFFLOAD)
-+			table->ft.type->setup(&table->ft, hook->ops.dev,
-+					      FLOW_BLOCK_BIND);
-+		spin_lock_bh(&hooks_lock);
-+		goto restart;
-+	}
-+
-+}
-+
-+static bool
-+xt_flowoffload_cleanup_hooks(struct xt_flowoffload_table *table)
-+{
-+	struct xt_flowoffload_hook *hook;
-+	bool active = false;
-+
-+restart:
-+	spin_lock_bh(&hooks_lock);
-+	hlist_for_each_entry(hook, &table->hooks, list) {
-+		if (hook->used || !hook->registered) {
-+			active = true;
-+			continue;
-+		}
-+
-+		hlist_del(&hook->list);
-+		spin_unlock_bh(&hooks_lock);
-+		if (table->ft.flags & NF_FLOWTABLE_HW_OFFLOAD)
-+			table->ft.type->setup(&table->ft, hook->ops.dev,
-+					      FLOW_BLOCK_UNBIND);
-+		nf_unregister_net_hook(hook->net, &hook->ops);
-+		kfree(hook);
-+		goto restart;
-+	}
-+	spin_unlock_bh(&hooks_lock);
-+
-+	return active;
-+}
-+
-+static void
-+xt_flowoffload_check_hook(struct nf_flowtable *flowtable,
-+			  struct flow_offload *flow, void *data)
-+{
-+	struct xt_flowoffload_table *table;
-+	struct flow_offload_tuple *tuple0 = &flow->tuplehash[0].tuple;
-+	struct flow_offload_tuple *tuple1 = &flow->tuplehash[1].tuple;
-+	struct xt_flowoffload_hook *hook;
-+
-+	table = container_of(flowtable, struct xt_flowoffload_table, ft);
-+
-+	spin_lock_bh(&hooks_lock);
-+	hlist_for_each_entry(hook, &table->hooks, list) {
-+		if (hook->ops.dev->ifindex != tuple0->iifidx &&
-+		    hook->ops.dev->ifindex != tuple1->iifidx)
-+			continue;
-+
-+		hook->used = true;
-+	}
-+	spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_hook_work(struct work_struct *work)
-+{
-+	struct xt_flowoffload_table *table;
-+	struct xt_flowoffload_hook *hook;
-+	int err;
-+
-+	table = container_of(work, struct xt_flowoffload_table, work.work);
-+
-+	spin_lock_bh(&hooks_lock);
-+	xt_flowoffload_register_hooks(table);
-+	hlist_for_each_entry(hook, &table->hooks, list)
-+		hook->used = false;
-+	spin_unlock_bh(&hooks_lock);
-+
-+	err = nf_flow_table_iterate(&table->ft, xt_flowoffload_check_hook,
-+				    NULL);
-+	if (err && err != -EAGAIN)
-+		goto out;
-+
-+	if (!xt_flowoffload_cleanup_hooks(table))
-+		return;
-+
-+out:
-+	queue_delayed_work(system_power_efficient_wq, &table->work, HZ);
-+}
-+
-+static bool
-+xt_flowoffload_skip(struct sk_buff *skb, int family)
-+{
-+	if (skb_sec_path(skb))
-+		return true;
-+
-+	if (family == NFPROTO_IPV4) {
-+		const struct ip_options *opt = &(IPCB(skb)->opt);
-+
-+		if (unlikely(opt->optlen))
-+			return true;
-+	}
-+
-+	return false;
-+}
-+
-+static enum flow_offload_xmit_type nf_xmit_type(struct dst_entry *dst)
-+{
-+	if (dst_xfrm(dst))
-+		return FLOW_OFFLOAD_XMIT_XFRM;
-+
-+	return FLOW_OFFLOAD_XMIT_NEIGH;
-+}
-+
-+static void nf_default_forward_path(struct nf_flow_route *route,
-+				    struct dst_entry *dst_cache,
-+				    enum ip_conntrack_dir dir,
-+				    struct net_device **dev)
-+{
-+	dev[!dir] = dst_cache->dev;
-+	route->tuple[!dir].in.ifindex	= dst_cache->dev->ifindex;
-+	route->tuple[dir].dst		= dst_cache;
-+	route->tuple[dir].xmit_type	= nf_xmit_type(dst_cache);
-+}
-+
-+static bool nf_is_valid_ether_device(const struct net_device *dev)
-+{
-+	if (!dev || (dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
-+	    dev->addr_len != ETH_ALEN || !is_valid_ether_addr(dev->dev_addr))
-+		return false;
-+
-+	return true;
-+}
-+
-+static void nf_dev_path_info(const struct net_device_path_stack *stack,
-+			     struct nf_forward_info *info,
-+			     unsigned char *ha)
-+{
-+	const struct net_device_path *path;
-+	int i;
-+
-+	memcpy(info->h_dest, ha, ETH_ALEN);
-+
-+	for (i = 0; i < stack->num_paths; i++) {
-+		path = &stack->path[i];
-+		switch (path->type) {
-+		case DEV_PATH_ETHERNET:
-+		case DEV_PATH_DSA:
-+		case DEV_PATH_VLAN:
-+		case DEV_PATH_PPPOE:
-+			info->indev = path->dev;
-+			if (is_zero_ether_addr(info->h_source))
-+				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
-+
-+			if (path->type == DEV_PATH_ETHERNET)
-+				break;
-+			if (path->type == DEV_PATH_DSA) {
-+				i = stack->num_paths;
-+				break;
-+			}
-+
-+			/* DEV_PATH_VLAN and DEV_PATH_PPPOE */
-+			if (info->num_encaps >= NF_FLOW_TABLE_ENCAP_MAX) {
-+				info->indev = NULL;
-+				break;
-+			}
-+			if (!info->outdev)
-+				info->outdev = path->dev;
-+			info->encap[info->num_encaps].id = path->encap.id;
-+			info->encap[info->num_encaps].proto = path->encap.proto;
-+			info->num_encaps++;
-+			if (path->type == DEV_PATH_PPPOE)
-+				memcpy(info->h_dest, path->encap.h_dest, ETH_ALEN);
-+			break;
-+		case DEV_PATH_BRIDGE:
-+			if (is_zero_ether_addr(info->h_source))
-+				memcpy(info->h_source, path->dev->dev_addr, ETH_ALEN);
-+
-+			switch (path->bridge.vlan_mode) {
-+			case DEV_PATH_BR_VLAN_UNTAG_HW:
-+				info->ingress_vlans |= BIT(info->num_encaps - 1);
-+				break;
-+			case DEV_PATH_BR_VLAN_TAG:
-+				info->encap[info->num_encaps].id = path->bridge.vlan_id;
-+				info->encap[info->num_encaps].proto = path->bridge.vlan_proto;
-+				info->num_encaps++;
-+				break;
-+			case DEV_PATH_BR_VLAN_UNTAG:
-+				info->num_encaps--;
-+				break;
-+			case DEV_PATH_BR_VLAN_KEEP:
-+				break;
-+			}
-+			break;
-+		default:
-+			info->indev = NULL;
-+			break;
-+		}
-+	}
-+	if (!info->outdev)
-+		info->outdev = info->indev;
-+
-+	info->hw_outdev = info->indev;
-+
-+	if (nf_is_valid_ether_device(info->indev))
-+		info->xmit_type = FLOW_OFFLOAD_XMIT_DIRECT;
-+}
-+
-+static int nf_dev_fill_forward_path(const struct nf_flow_route *route,
-+				     const struct dst_entry *dst_cache,
-+				     const struct nf_conn *ct,
-+				     enum ip_conntrack_dir dir, u8 *ha,
-+				     struct net_device_path_stack *stack)
-+{
-+	const void *daddr = &ct->tuplehash[!dir].tuple.src.u3;
-+	struct net_device *dev = dst_cache->dev;
-+	struct neighbour *n;
-+	u8 nud_state;
-+
-+	if (!nf_is_valid_ether_device(dev))
-+		goto out;
-+
-+	n = dst_neigh_lookup(dst_cache, daddr);
-+	if (!n)
-+		return -1;
-+
-+	read_lock_bh(&n->lock);
-+	nud_state = n->nud_state;
-+	ether_addr_copy(ha, n->ha);
-+	read_unlock_bh(&n->lock);
-+	neigh_release(n);
-+
-+	if (!(nud_state & NUD_VALID))
-+		return -1;
-+
-+out:
-+	return dev_fill_forward_path(dev, ha, stack);
-+}
-+
-+static void nf_dev_forward_path(struct nf_flow_route *route,
-+				const struct nf_conn *ct,
-+				enum ip_conntrack_dir dir,
-+				struct net_device **devs)
-+{
-+	const struct dst_entry *dst = route->tuple[dir].dst;
-+	struct net_device_path_stack stack;
-+	struct nf_forward_info info = {};
-+	unsigned char ha[ETH_ALEN];
-+	int i;
-+
-+	if (nf_dev_fill_forward_path(route, dst, ct, dir, ha, &stack) >= 0)
-+		nf_dev_path_info(&stack, &info, ha);
-+
-+	devs[!dir] = (struct net_device *)info.indev;
-+	if (!info.indev)
-+		return;
-+
-+	route->tuple[!dir].in.ifindex = info.indev->ifindex;
-+	for (i = 0; i < info.num_encaps; i++) {
-+		route->tuple[!dir].in.encap[i].id = info.encap[i].id;
-+		route->tuple[!dir].in.encap[i].proto = info.encap[i].proto;
-+	}
-+	route->tuple[!dir].in.num_encaps = info.num_encaps;
-+	route->tuple[!dir].in.ingress_vlans = info.ingress_vlans;
-+
-+	if (info.xmit_type == FLOW_OFFLOAD_XMIT_DIRECT) {
-+		memcpy(route->tuple[dir].out.h_source, info.h_source, ETH_ALEN);
-+		memcpy(route->tuple[dir].out.h_dest, info.h_dest, ETH_ALEN);
-+		route->tuple[dir].out.ifindex = info.outdev->ifindex;
-+		route->tuple[dir].out.hw_ifindex = info.hw_outdev->ifindex;
-+		route->tuple[dir].xmit_type = info.xmit_type;
-+	}
-+}
-+
-+static int
-+xt_flowoffload_route(struct sk_buff *skb, const struct nf_conn *ct,
-+		     const struct xt_action_param *par,
-+		     struct nf_flow_route *route, enum ip_conntrack_dir dir,
-+		     struct net_device **devs)
-+{
-+	struct dst_entry *this_dst = skb_dst(skb);
-+	struct dst_entry *other_dst = NULL;
-+	struct flowi fl;
-+
-+	memset(&fl, 0, sizeof(fl));
-+	switch (xt_family(par)) {
-+	case NFPROTO_IPV4:
-+		fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
-+		fl.u.ip4.flowi4_oif = xt_in(par)->ifindex;
-+		break;
-+	case NFPROTO_IPV6:
-+		fl.u.ip6.saddr = ct->tuplehash[!dir].tuple.dst.u3.in6;
-+		fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
-+		fl.u.ip6.flowi6_oif = xt_in(par)->ifindex;
-+		break;
-+	}
-+
-+	if (!dst_hold_safe(this_dst))
-+		return -ENOENT;
-+
-+	nf_route(xt_net(par), &other_dst, &fl, false, xt_family(par));
-+	if (!other_dst) {
-+		dst_release(this_dst);
-+		return -ENOENT;
-+	}
-+
-+	nf_default_forward_path(route, this_dst, dir, devs);
-+	nf_default_forward_path(route, other_dst, !dir, devs);
-+
-+	if (route->tuple[dir].xmit_type	== FLOW_OFFLOAD_XMIT_NEIGH &&
-+	    route->tuple[!dir].xmit_type == FLOW_OFFLOAD_XMIT_NEIGH) {
-+		nf_dev_forward_path(route, ct, dir, devs);
-+		nf_dev_forward_path(route, ct, !dir, devs);
-+	}
-+
-+	return 0;
-+}
-+
-+static unsigned int
-+flowoffload_tg(struct sk_buff *skb, const struct xt_action_param *par)
-+{
-+	struct xt_flowoffload_table *table;
-+	const struct xt_flowoffload_target_info *info = par->targinfo;
-+	struct tcphdr _tcph, *tcph = NULL;
-+	enum ip_conntrack_info ctinfo;
-+	enum ip_conntrack_dir dir;
-+	struct nf_flow_route route = {};
-+	struct flow_offload *flow = NULL;
-+	struct net_device *devs[2] = {};
-+	struct nf_conn *ct;
-+	struct net *net;
-+
-+	if (xt_flowoffload_skip(skb, xt_family(par)))
-+		return XT_CONTINUE;
-+
-+	ct = nf_ct_get(skb, &ctinfo);
-+	if (ct == NULL)
-+		return XT_CONTINUE;
-+
-+	switch (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum) {
-+	case IPPROTO_TCP:
-+		if (ct->proto.tcp.state != TCP_CONNTRACK_ESTABLISHED)
-+			return XT_CONTINUE;
-+
-+		tcph = skb_header_pointer(skb, par->thoff,
-+					  sizeof(_tcph), &_tcph);
-+		if (unlikely(!tcph || tcph->fin || tcph->rst))
-+			return XT_CONTINUE;
-+		break;
-+	case IPPROTO_UDP:
-+		break;
-+	default:
-+		return XT_CONTINUE;
-+	}
-+
-+	if (nf_ct_ext_exist(ct, NF_CT_EXT_HELPER) ||
-+	    ct->status & (IPS_SEQ_ADJUST | IPS_NAT_CLASH))
-+		return XT_CONTINUE;
-+
-+	if (!nf_ct_is_confirmed(ct))
-+		return XT_CONTINUE;
-+
-+	dir = CTINFO2DIR(ctinfo);
-+
-+	devs[dir] = xt_out(par);
-+	devs[!dir] = xt_in(par);
-+
-+	if (!devs[dir] || !devs[!dir])
-+		return XT_CONTINUE;
-+
-+	if (test_and_set_bit(IPS_OFFLOAD_BIT, &ct->status))
-+		return XT_CONTINUE;
-+
-+	if (xt_flowoffload_route(skb, ct, par, &route, dir, devs) < 0)
-+		goto err_flow_route;
-+
-+	flow = flow_offload_alloc(ct);
-+	if (!flow)
-+		goto err_flow_alloc;
-+
-+	flow_offload_route_init(flow, &route);
-+
-+	if (tcph) {
-+		ct->proto.tcp.seen[0].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
-+		ct->proto.tcp.seen[1].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
-+	}
-+
-+	table = &flowtable[!!(info->flags & XT_FLOWOFFLOAD_HW)];
-+
-+	net = read_pnet(&table->ft.net);
-+	if (!net)
-+		write_pnet(&table->ft.net, xt_net(par));
-+
-+	__set_bit(NF_FLOW_HW_BIDIRECTIONAL, &flow->flags);
-+	if (flow_offload_add(&table->ft, flow) < 0)
-+		goto err_flow_add;
-+
-+	xt_flowoffload_check_device(table, devs[0]);
-+	xt_flowoffload_check_device(table, devs[1]);
-+
-+	return XT_CONTINUE;
-+
-+err_flow_add:
-+	flow_offload_free(flow);
-+err_flow_alloc:
-+	dst_release(route.tuple[dir].dst);
-+	dst_release(route.tuple[!dir].dst);
-+err_flow_route:
-+	clear_bit(IPS_OFFLOAD_BIT, &ct->status);
-+
-+	return XT_CONTINUE;
-+}
-+
-+static int flowoffload_chk(const struct xt_tgchk_param *par)
-+{
-+	struct xt_flowoffload_target_info *info = par->targinfo;
-+
-+	if (info->flags & ~XT_FLOWOFFLOAD_MASK)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+static struct xt_target offload_tg_reg __read_mostly = {
-+	.family		= NFPROTO_UNSPEC,
-+	.name		= "FLOWOFFLOAD",
-+	.revision	= 0,
-+	.targetsize	= sizeof(struct xt_flowoffload_target_info),
-+	.usersize	= sizeof(struct xt_flowoffload_target_info),
-+	.checkentry	= flowoffload_chk,
-+	.target		= flowoffload_tg,
-+	.me		= THIS_MODULE,
-+};
-+
-+static int flow_offload_netdev_event(struct notifier_block *this,
-+				     unsigned long event, void *ptr)
-+{
-+	struct xt_flowoffload_hook *hook0, *hook1;
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+	if (event != NETDEV_UNREGISTER)
-+		return NOTIFY_DONE;
-+
-+	spin_lock_bh(&hooks_lock);
-+	hook0 = flow_offload_lookup_hook(&flowtable[0], dev);
-+	if (hook0)
-+		hlist_del(&hook0->list);
-+
-+	hook1 = flow_offload_lookup_hook(&flowtable[1], dev);
-+	if (hook1)
-+		hlist_del(&hook1->list);
-+	spin_unlock_bh(&hooks_lock);
-+
-+	if (hook0) {
-+		nf_unregister_net_hook(hook0->net, &hook0->ops);
-+		kfree(hook0);
-+	}
-+
-+	if (hook1) {
-+		nf_unregister_net_hook(hook1->net, &hook1->ops);
-+		kfree(hook1);
-+	}
-+
-+	nf_flow_table_cleanup(dev);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+	.notifier_call	= flow_offload_netdev_event,
-+};
-+
-+static int nf_flow_rule_route_inet(struct net *net,
-+				   struct flow_offload *flow,
-+				   enum flow_offload_tuple_dir dir,
-+				   struct nf_flow_rule *flow_rule)
-+{
-+	const struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple;
-+	int err;
-+
-+	switch (flow_tuple->l3proto) {
-+	case NFPROTO_IPV4:
-+		err = nf_flow_rule_route_ipv4(net, flow, dir, flow_rule);
-+		break;
-+	case NFPROTO_IPV6:
-+		err = nf_flow_rule_route_ipv6(net, flow, dir, flow_rule);
-+		break;
-+	default:
-+		err = -1;
-+		break;
-+	}
-+
-+	return err;
-+}
-+
-+static struct nf_flowtable_type flowtable_inet = {
-+	.family		= NFPROTO_INET,
-+	.init		= nf_flow_table_init,
-+	.setup		= nf_flow_table_offload_setup,
-+	.action		= nf_flow_rule_route_inet,
-+	.free		= nf_flow_table_free,
-+	.hook		= xt_flowoffload_net_hook,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int init_flowtable(struct xt_flowoffload_table *tbl)
-+{
-+	INIT_DELAYED_WORK(&tbl->work, xt_flowoffload_hook_work);
-+	tbl->ft.type = &flowtable_inet;
-+	tbl->ft.flags = NF_FLOWTABLE_COUNTER;
-+
-+	return nf_flow_table_init(&tbl->ft);
-+}
-+
-+static int __init xt_flowoffload_tg_init(void)
-+{
-+	int ret;
-+
-+	register_netdevice_notifier(&flow_offload_netdev_notifier);
-+
-+	ret = init_flowtable(&flowtable[0]);
-+	if (ret)
-+		return ret;
-+
-+	ret = init_flowtable(&flowtable[1]);
-+	if (ret)
-+		goto cleanup;
-+
-+	flowtable[1].ft.flags |= NF_FLOWTABLE_HW_OFFLOAD;
-+
-+	ret = xt_register_target(&offload_tg_reg);
-+	if (ret)
-+		goto cleanup2;
-+
-+	return 0;
-+
-+cleanup2:
-+	nf_flow_table_free(&flowtable[1].ft);
-+cleanup:
-+	nf_flow_table_free(&flowtable[0].ft);
-+	return ret;
-+}
-+
-+static void __exit xt_flowoffload_tg_exit(void)
-+{
-+	xt_unregister_target(&offload_tg_reg);
-+	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
-+	nf_flow_table_free(&flowtable[0].ft);
-+	nf_flow_table_free(&flowtable[1].ft);
-+}
-+
-+MODULE_LICENSE("GPL");
-+module_init(xt_flowoffload_tg_init);
-+module_exit(xt_flowoffload_tg_exit);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -7,7 +7,6 @@
- #include <linux/netdevice.h>
- #include <net/ip.h>
- #include <net/ip6_route.h>
--#include <net/netfilter/nf_tables.h>
- #include <net/netfilter/nf_flow_table.h>
- #include <net/netfilter/nf_conntrack.h>
- #include <net/netfilter/nf_conntrack_core.h>
-@@ -374,8 +373,7 @@ flow_offload_lookup(struct nf_flowtable
- }
- EXPORT_SYMBOL_GPL(flow_offload_lookup);
- 
--static int
--nf_flow_table_iterate(struct nf_flowtable *flow_table,
-+int nf_flow_table_iterate(struct nf_flowtable *flow_table,
- 		      void (*iter)(struct nf_flowtable *flowtable,
- 				   struct flow_offload *flow, void *data),
- 		      void *data)
-@@ -436,6 +434,7 @@ static void nf_flow_offload_gc_step(stru
- 		nf_flow_offload_stats(flow_table, flow);
- 	}
- }
-+EXPORT_SYMBOL_GPL(nf_flow_table_iterate);
- 
- void nf_flow_table_gc_run(struct nf_flowtable *flow_table)
- {
---- /dev/null
-+++ b/include/uapi/linux/netfilter/xt_FLOWOFFLOAD.h
-@@ -0,0 +1,17 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+#ifndef _XT_FLOWOFFLOAD_H
-+#define _XT_FLOWOFFLOAD_H
-+
-+#include <linux/types.h>
-+
-+enum {
-+	XT_FLOWOFFLOAD_HW	= 1 << 0,
-+
-+	XT_FLOWOFFLOAD_MASK	= XT_FLOWOFFLOAD_HW
-+};
-+
-+struct xt_flowoffload_target_info {
-+	__u32 flags;
-+};
-+
-+#endif /* _XT_FLOWOFFLOAD_H */
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -293,6 +293,11 @@ void nf_flow_table_free(struct nf_flowta
- 
- void flow_offload_teardown(struct flow_offload *flow);
- 
-+int nf_flow_table_iterate(struct nf_flowtable *flow_table,
-+                      void (*iter)(struct nf_flowtable *flowtable,
-+                                   struct flow_offload *flow, void *data),
-+                      void *data);
-+
- void nf_flow_snat_port(const struct flow_offload *flow,
- 		       struct sk_buff *skb, unsigned int thoff,
- 		       u8 protocol, enum flow_offload_tuple_dir dir);
diff --git a/target/linux/generic/hack-6.1/651-wireless_mesh_header.patch b/target/linux/generic/hack-6.1/651-wireless_mesh_header.patch
deleted file mode 100644
index fd7d5346ad99..000000000000
--- a/target/linux/generic/hack-6.1/651-wireless_mesh_header.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 6d3bc769657b0ee7c7506dad9911111c4226a7ea Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:21:05 +0200
-Subject: mac80211: increase wireless mesh header size
-
-lede-commit 3d4466cfd8f75f717efdb1f96fdde3c70d865fc1
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- include/linux/netdevice.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -149,8 +149,8 @@ static inline bool dev_xmit_complete(int
- 
- #if defined(CONFIG_HYPERV_NET)
- # define LL_MAX_HEADER 128
--#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
--# if defined(CONFIG_MAC80211_MESH)
-+#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) || 1
-+# if defined(CONFIG_MAC80211_MESH) || 1
- #  define LL_MAX_HEADER 128
- # else
- #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/hack-6.1/660-fq_codel_defaults.patch b/target/linux/generic/hack-6.1/660-fq_codel_defaults.patch
deleted file mode 100644
index b923a2d206da..000000000000
--- a/target/linux/generic/hack-6.1/660-fq_codel_defaults.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a6ccb238939b25851474a279b20367fd24a0e816 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:21:53 +0200
-Subject:  hack: net: fq_codel: tune defaults for small devices
-
-Assume that x86_64 devices always have a big memory and do not need this 
-optimization compared to devices with only 32 MB or 64 MB RAM.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_fq_codel.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -471,7 +471,11 @@ static int fq_codel_init(struct Qdisc *s
- 
- 	sch->limit = 10*1024;
- 	q->flows_cnt = 1024;
-+#ifdef CONFIG_X86_64
- 	q->memory_limit = 32 << 20; /* 32 MBytes */
-+#else
-+	q->memory_limit = 4 << 20; /* 4 MBytes */
-+#endif
- 	q->drop_batch_size = 64;
- 	q->quantum = psched_mtu(qdisc_dev(sch));
- 	INIT_LIST_HEAD(&q->new_flows);
diff --git a/target/linux/generic/hack-6.1/661-kernel-ct-size-the-hashtable-more-adequately.patch b/target/linux/generic/hack-6.1/661-kernel-ct-size-the-hashtable-more-adequately.patch
deleted file mode 100644
index fe94a9da0c4e..000000000000
--- a/target/linux/generic/hack-6.1/661-kernel-ct-size-the-hashtable-more-adequately.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 804fbb3f2ec9283f7b778e057a68bfff440a0be6 Mon Sep 17 00:00:00 2001
-From: Rui Salvaterra <rsalvaterra@gmail.com>
-Date: Wed, 30 Mar 2022 22:51:55 +0100
-Subject: [PATCH] kernel: ct: size the hashtable more adequately
-
-To set the default size of the connection tracking hash table, a divider of
-16384 becomes inadequate for a router handling lots of connections. Divide by
-2048 instead, making the default size scale better with the available RAM.
-
-Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
----
- net/netfilter/nf_conntrack_core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -2705,7 +2705,7 @@ int nf_conntrack_init_start(void)
- 
- 	if (!nf_conntrack_htable_size) {
- 		nf_conntrack_htable_size
--			= (((nr_pages << PAGE_SHIFT) / 16384)
-+			= (((nr_pages << PAGE_SHIFT) / 2048)
- 			   / sizeof(struct hlist_head));
- 		if (BITS_PER_LONG >= 64 &&
- 		    nr_pages > (4 * (1024 * 1024 * 1024 / PAGE_SIZE)))
diff --git a/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch
deleted file mode 100644
index 673082d8408e..000000000000
--- a/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:24:23 +0200
-Subject: net: swconfig: adds openwrt switch layer
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/net/phy/Kconfig   | 83 +++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/phy/Makefile  | 15 +++++++++
- include/uapi/linux/Kbuild |  1 +
- 3 files changed, 99 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -67,6 +67,80 @@ config SFP
- 	depends on HWMON || HWMON=n
- 	select MDIO_I2C
- 
-+comment "Switch configuration API + drivers"
-+
-+config SWCONFIG
-+	tristate "Switch configuration API"
-+	help
-+	  Switch configuration API using netlink. This allows
-+	  you to configure the VLAN features of certain switches.
-+
-+config SWCONFIG_LEDS
-+	bool "Switch LED trigger support"
-+	depends on (SWCONFIG && LEDS_TRIGGERS)
-+
-+config ADM6996_PHY
-+	tristate "Driver for ADM6996 switches"
-+	select SWCONFIG
-+	help
-+	  Currently supports the ADM6996FC and ADM6996M switches.
-+	  Support for FC is very limited.
-+
-+config AR8216_PHY
-+	tristate "Driver for Atheros AR8216/8327 switches"
-+	select SWCONFIG
-+	select ETHERNET_PACKET_MANGLE
-+
-+config AR8216_PHY_LEDS
-+	bool "Atheros AR8216 switch LED support"
-+	depends on (AR8216_PHY && LEDS_CLASS)
-+
-+source "drivers/net/phy/b53/Kconfig"
-+
-+config IP17XX_PHY
-+	tristate "Driver for IC+ IP17xx switches"
-+	select SWCONFIG
-+
-+config PSB6970_PHY
-+	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
-+	select SWCONFIG
-+
-+config RTL8306_PHY
-+	tristate "Driver for Realtek RTL8306S switches"
-+	select SWCONFIG
-+
-+config RTL8366_SMI
-+	tristate "Driver for the RTL8366 SMI interface"
-+	depends on GPIOLIB
-+	help
-+	  This module implements the SMI interface protocol which is used
-+	  by some RTL8366 ethernet switch devices via the generic GPIO API.
-+
-+if RTL8366_SMI
-+
-+config RTL8366_SMI_DEBUG_FS
-+	bool "RTL8366 SMI interface debugfs support"
-+        depends on DEBUG_FS
-+        default n
-+
-+config RTL8366S_PHY
-+	tristate "Driver for the Realtek RTL8366S switch"
-+	select SWCONFIG
-+
-+config RTL8366RB_PHY
-+	tristate "Driver for the Realtek RTL8366RB switch"
-+	select SWCONFIG
-+
-+config RTL8367_PHY
-+	tristate "Driver for the Realtek RTL8367R/M switches"
-+	select SWCONFIG
-+
-+config RTL8367B_PHY
-+	tristate "Driver fot the Realtek RTL8367R-VB switch"
-+	select SWCONFIG
-+
-+endif # RTL8366_SMI
-+
- comment "MII PHY device drivers"
- 
- config AIR_EN8811H_PHY
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -24,6 +24,21 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_
- obj-$(CONFIG_PHYLINK)		+= phylink.o
- obj-$(CONFIG_PHYLIB)		+= libphy.o
- 
-+obj-$(CONFIG_SWCONFIG)		+= swconfig.o
-+obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
-+obj-$(CONFIG_AR8216_PHY)	+= ar8xxx.o
-+ar8xxx-y			+= ar8216.o
-+ar8xxx-y			+= ar8327.o
-+obj-$(CONFIG_SWCONFIG_B53)	+= b53/
-+obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
-+obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
-+obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
-+obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
-+obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
-+obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
-+obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
-+obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
-+
- obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += mii_timestamper.o
- 
- obj-$(CONFIG_SFP)		+= sfp.o
---- a/include/linux/platform_data/b53.h
-+++ b/include/linux/platform_data/b53.h
-@@ -29,6 +29,9 @@ struct b53_platform_data {
- 	u32 chip_id;
- 	u16 enabled_ports;
- 
-+	/* allow to specify an ethX alias */
-+	const char *alias;
-+
- 	/* only used by MMAP'd driver */
- 	unsigned big_endian:1;
- 	void __iomem *regs;
diff --git a/target/linux/generic/hack-6.1/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch b/target/linux/generic/hack-6.1/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch
deleted file mode 100644
index 75907bf47201..000000000000
--- a/target/linux/generic/hack-6.1/711-net-dsa-mv88e6xxx-disable-ATU-violation.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From ebd924d773223593142d417c41d4ee6fa16f1805 Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 13:45:56 +0200
-Subject: [PATCH] net/dsa/mv88e6xxx: disable ATU violation
-
----
- drivers/net/dsa/mv88e6xxx/chip.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -3510,6 +3510,9 @@ static int mv88e6xxx_setup_port(struct m
- 	else
- 		reg = 1 << port;
- 
-+	/* Disable ATU member violation interrupt */
-+	reg |= MV88E6XXX_PORT_ASSOC_VECTOR_IGNORE_WRONG;
-+
- 	err = mv88e6xxx_port_write(chip, port, MV88E6XXX_PORT_ASSOC_VECTOR,
- 				   reg);
- 	if (err)
diff --git a/target/linux/generic/hack-6.1/721-net-add-packet-mangeling.patch b/target/linux/generic/hack-6.1/721-net-add-packet-mangeling.patch
deleted file mode 100644
index c6306c85ccb1..000000000000
--- a/target/linux/generic/hack-6.1/721-net-add-packet-mangeling.patch
+++ /dev/null
@@ -1,167 +0,0 @@
-From ffe387740bbe88dd88bbe04d6375902708003d6e Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:25:00 +0200
-Subject: net: add packet mangeling
-
-ar8216 switches have a hardware bug, which renders normal 802.1q support
-unusable. Packet mangling is required to fix up the vlan for incoming
-packets.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h | 11 +++++++++++
- include/linux/skbuff.h    | 14 ++++----------
- net/Kconfig               |  6 ++++++
- net/core/dev.c            | 20 +++++++++++++++-----
- net/core/skbuff.c         | 17 +++++++++++++++++
- net/ethernet/eth.c        |  6 ++++++
- 6 files changed, 59 insertions(+), 15 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1730,6 +1730,7 @@ enum netdev_priv_flags {
- 	/* was IFF_LIVE_RENAME_OK */
- 	IFF_TX_SKB_NO_LINEAR		= BIT_ULL(31),
- 	IFF_CHANGE_PROTO_DOWN		= BIT_ULL(32),
-+	IFF_NO_IP_ALIGN			= BIT_ULL(33),
- };
- 
- #define IFF_802_1Q_VLAN			IFF_802_1Q_VLAN
-@@ -1763,6 +1764,7 @@ enum netdev_priv_flags {
- #define IFF_FAILOVER_SLAVE		IFF_FAILOVER_SLAVE
- #define IFF_L3MDEV_RX_HANDLER		IFF_L3MDEV_RX_HANDLER
- #define IFF_TX_SKB_NO_LINEAR		IFF_TX_SKB_NO_LINEAR
-+#define IFF_NO_IP_ALIGN		IFF_NO_IP_ALIGN
- 
- /* Specifies the type of the struct net_device::ml_priv pointer */
- enum netdev_ml_priv_type {
-@@ -2131,6 +2133,11 @@ struct net_device {
- 	const struct tlsdev_ops *tlsdev_ops;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
-+	struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
-+#endif
-+
- 	const struct header_ops *header_ops;
- 
- 	unsigned char		operstate;
-@@ -2204,6 +2211,10 @@ struct net_device {
- 	struct mctp_dev __rcu	*mctp_ptr;
- #endif
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	void			*phy_ptr; /* PHY device specific data */
-+#endif
-+
- /*
-  * Cache lines mostly used on receive path (including eth_type_trans())
-  */
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -3071,6 +3071,10 @@ static inline int pskb_trim(struct sk_bu
- 	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
- }
- 
-+extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp);
-+
-+
- /**
-  *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
-  *	@skb: buffer to alter
-@@ -3220,16 +3224,6 @@ static inline struct sk_buff *dev_alloc_
- }
- 
- 
--static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
--		unsigned int length, gfp_t gfp)
--{
--	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
--
--	if (NET_IP_ALIGN && skb)
--		skb_reserve(skb, NET_IP_ALIGN);
--	return skb;
--}
--
- static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
- 		unsigned int length)
- {
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -26,6 +26,12 @@ menuconfig NET
- 
- if NET
- 
-+config ETHERNET_PACKET_MANGLE
-+	bool
-+	help
-+	  This option can be selected by phy drivers that need to mangle
-+	  packets going in or out of an ethernet device.
-+
- config WANT_COMPAT_NETLINK_MESSAGES
- 	bool
- 	help
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -3607,6 +3607,11 @@ static int xmit_one(struct sk_buff *skb,
- 	if (dev_nit_active(dev))
- 		dev_queue_xmit_nit(skb, dev);
- 
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev->eth_mangle_tx && !(skb = dev->eth_mangle_tx(dev, skb)))
-+		return NETDEV_TX_OK;
-+#endif
-+
- 	len = skb->len;
- 	trace_net_dev_start_xmit(skb, dev);
- 	rc = netdev_start_xmit(skb, dev, txq, more);
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -61,6 +61,7 @@
- #include <linux/if_vlan.h>
- #include <linux/mpls.h>
- #include <linux/kcov.h>
-+#include <linux/if.h>
- 
- #include <net/protocol.h>
- #include <net/dst.h>
-@@ -709,6 +710,22 @@ skb_fail:
- }
- EXPORT_SYMBOL(__napi_alloc_skb);
- 
-+struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+		unsigned int length, gfp_t gfp)
-+{
-+	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN))
-+		return skb;
-+#endif
-+
-+	if (NET_IP_ALIGN && skb)
-+		skb_reserve(skb, NET_IP_ALIGN);
-+	return skb;
-+}
-+EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
-+
- void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
- 		     int size, unsigned int truesize)
- {
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -159,6 +159,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- 	const struct ethhdr *eth;
- 
- 	skb->dev = dev;
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+	if (dev->eth_mangle_rx)
-+		dev->eth_mangle_rx(dev, skb);
-+#endif
-+
- 	skb_reset_mac_header(skb);
- 
- 	eth = (struct ethhdr *)skb->data;
diff --git a/target/linux/generic/hack-6.1/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch b/target/linux/generic/hack-6.1/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch
deleted file mode 100644
index 42b44d564d94..000000000000
--- a/target/linux/generic/hack-6.1/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Tue, 27 Aug 2019 15:16:56 +0300
-Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412
-
-Adds support for AQR112 and AQR412 which is mostly based on existing code
-with the addition of code configuring the protocol on system side.
-This allows changing the system side protocol without having to deploy a
-different firmware on the PHY.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/aquantia/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 88 insertions(+)
-
---- a/drivers/net/phy/aquantia/aquantia_main.c
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -27,6 +27,8 @@
- #define PHY_ID_AQR113	0x31c31c40
- #define PHY_ID_AQR113C	0x31c31c12
- #define PHY_ID_AQR813	0x31c31cb2
-+#define PHY_ID_AQR112	0x03a1b662
-+#define PHY_ID_AQR412	0x03a1b712
- 
- #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
- #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-@@ -99,6 +101,29 @@
- #define AQR107_OP_IN_PROG_SLEEP		1000
- #define AQR107_OP_IN_PROG_TIMEOUT	100000
- 
-+/* registers in MDIO_MMD_VEND1 region */
-+#define AQUANTIA_VND1_GLOBAL_SC			0x000
-+#define  AQUANTIA_VND1_GLOBAL_SC_LP		BIT(0xb)
-+
-+/* global start rate, the protocol associated with this speed is used by default
-+ * on SI.
-+ */
-+#define AQUANTIA_VND1_GSTART_RATE		0x31a
-+#define  AQUANTIA_VND1_GSTART_RATE_OFF		0
-+#define  AQUANTIA_VND1_GSTART_RATE_100M		1
-+#define  AQUANTIA_VND1_GSTART_RATE_1G		2
-+#define  AQUANTIA_VND1_GSTART_RATE_10G		3
-+#define  AQUANTIA_VND1_GSTART_RATE_2_5G		4
-+#define  AQUANTIA_VND1_GSTART_RATE_5G		5
-+
-+/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */
-+#define AQUANTIA_VND1_GSYSCFG_BASE		0x31b
-+#define AQUANTIA_VND1_GSYSCFG_100M		0
-+#define AQUANTIA_VND1_GSYSCFG_1G		1
-+#define AQUANTIA_VND1_GSYSCFG_2_5G		2
-+#define AQUANTIA_VND1_GSYSCFG_5G		3
-+#define AQUANTIA_VND1_GSYSCFG_10G		4
-+
- struct aqr107_hw_stat {
- 	const char *name;
- 	int reg;
-@@ -230,6 +255,51 @@ static int aqr_config_aneg(struct phy_de
- 	return genphy_c45_check_and_restart_aneg(phydev, changed);
- }
- 
-+static struct {
-+	u16 syscfg;
-+	int cnt;
-+	u16 start_rate;
-+} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = {
-+	[PHY_INTERFACE_MODE_SGMII] =      {0x04b, AQUANTIA_VND1_GSYSCFG_1G,
-+					   AQUANTIA_VND1_GSTART_RATE_1G},
-+	[PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G,
-+					   AQUANTIA_VND1_GSTART_RATE_2_5G},
-+	[PHY_INTERFACE_MODE_XGMII] =      {0x100, AQUANTIA_VND1_GSYSCFG_10G,
-+					   AQUANTIA_VND1_GSTART_RATE_10G},
-+	[PHY_INTERFACE_MODE_USXGMII] =    {0x080, AQUANTIA_VND1_GSYSCFG_10G,
-+					   AQUANTIA_VND1_GSTART_RATE_10G},
-+};
-+
-+/* Sets up protocol on system side before calling aqr_config_aneg */
-+static int aqr_config_aneg_set_prot(struct phy_device *phydev)
-+{
-+	int if_type = phydev->interface;
-+	int i;
-+
-+	if (!aquantia_syscfg[if_type].cnt)
-+		return 0;
-+
-+	/* set PHY in low power mode so we can configure protocols */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC,
-+		      AQUANTIA_VND1_GLOBAL_SC_LP);
-+	mdelay(10);
-+
-+	/* set the default rate to enable the SI link */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
-+		      aquantia_syscfg[if_type].start_rate);
-+
-+	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
-+		phy_write_mmd(phydev, MDIO_MMD_VEND1,
-+			      AQUANTIA_VND1_GSYSCFG_BASE + i,
-+			      aquantia_syscfg[if_type].syscfg);
-+
-+	/* wake PHY back up */
-+	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
-+	mdelay(10);
-+
-+	return aqr_config_aneg(phydev);
-+}
-+
- static int aqr_config_intr(struct phy_device *phydev)
- {
- 	bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
-@@ -869,6 +939,30 @@ static struct phy_driver aqr_driver[] =
- 	.get_stats	= aqr107_get_stats,
- 	.link_change_notify = aqr107_link_change_notify,
- },
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
-+	.name		= "Aquantia AQR112",
-+	.probe		= aqr107_probe,
-+	.config_aneg	= aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
-+	.name		= "Aquantia AQR412",
-+	.probe		= aqr107_probe,
-+	.config_aneg	= aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+},
- };
- 
- module_phy_driver(aqr_driver);
-@@ -886,6 +980,8 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
- 	{ }
- };
- 
diff --git a/target/linux/generic/hack-6.1/723-net-phy-aquantia-fix-system-side-protocol-mi.patch b/target/linux/generic/hack-6.1/723-net-phy-aquantia-fix-system-side-protocol-mi.patch
deleted file mode 100644
index 72a70ebc140a..000000000000
--- a/target/linux/generic/hack-6.1/723-net-phy-aquantia-fix-system-side-protocol-mi.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 5f008cb22f60da4e10375f22266c1a4e20b1252e Mon Sep 17 00:00:00 2001
-From: Alex Marginean <alexandru.marginean@nxp.com>
-Date: Fri, 20 Sep 2019 18:22:52 +0300
-Subject: [PATCH] drivers: net: phy: aquantia: fix system side protocol
- misconfiguration
-
-Do not set up protocols for speeds that are not supported by FW.  Enabling
-these protocols leads to link issues on system side.
-
-Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
----
- drivers/net/phy/aquantia/aquantia_main.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/aquantia/aquantia_main.c
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -288,10 +288,16 @@ static int aqr_config_aneg_set_prot(stru
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
- 		      aquantia_syscfg[if_type].start_rate);
- 
--	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
-+	for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) {
-+		u16 reg = phy_read_mmd(phydev, MDIO_MMD_VEND1,
-+				       AQUANTIA_VND1_GSYSCFG_BASE + i);
-+		if (!reg)
-+			continue;
-+
- 		phy_write_mmd(phydev, MDIO_MMD_VEND1,
- 			      AQUANTIA_VND1_GSYSCFG_BASE + i,
- 			      aquantia_syscfg[if_type].syscfg);
-+	}
- 
- 	/* wake PHY back up */
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
diff --git a/target/linux/generic/hack-6.1/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch b/target/linux/generic/hack-6.1/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch
deleted file mode 100644
index 6d107c33498e..000000000000
--- a/target/linux/generic/hack-6.1/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 3b92ee7b7899b6beffb2b484c58326e36612a873 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 23 Dec 2021 14:52:56 +0000
-Subject: [PATCH] net: phy: aquantia: add PHY_ID for AQR112R
-
-As advised by Ian Chang this PHY is used in Puzzle devices.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/aquantia/aquantia_main.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/net/phy/aquantia/aquantia_main.c
-+++ b/drivers/net/phy/aquantia/aquantia_main.c
-@@ -29,6 +29,8 @@
- #define PHY_ID_AQR813	0x31c31cb2
- #define PHY_ID_AQR112	0x03a1b662
- #define PHY_ID_AQR412	0x03a1b712
-+#define PHY_ID_AQR112C	0x03a1b790
-+#define PHY_ID_AQR112R	0x31c31d12
- 
- #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
- #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
-@@ -969,6 +971,30 @@ static struct phy_driver aqr_driver[] =
- 	.get_strings	= aqr107_get_strings,
- 	.get_stats	= aqr107_get_stats,
- },
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR112C),
-+	.name		= "Aquantia AQR112C",
-+	.probe		= aqr107_probe,
-+	.config_aneg	= aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+},
-+{
-+	PHY_ID_MATCH_MODEL(PHY_ID_AQR112R),
-+	.name		= "Aquantia AQR112R",
-+	.probe		= aqr107_probe,
-+	.config_aneg	= aqr_config_aneg_set_prot,
-+	.config_intr	= aqr_config_intr,
-+	.handle_interrupt = aqr_handle_interrupt,
-+	.read_status	= aqr107_read_status,
-+	.get_sset_count	= aqr107_get_sset_count,
-+	.get_strings	= aqr107_get_strings,
-+	.get_stats	= aqr107_get_stats,
-+},
- };
- 
- module_phy_driver(aqr_driver);
-@@ -988,6 +1014,8 @@ static struct mdio_device_id __maybe_unu
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR813) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112) },
- 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR412) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112C) },
-+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR112R) },
- 	{ }
- };
- 
diff --git a/target/linux/generic/hack-6.1/750-net-pcs-mtk-lynxi-workaround-2500BaseX-no-an.patch b/target/linux/generic/hack-6.1/750-net-pcs-mtk-lynxi-workaround-2500BaseX-no-an.patch
deleted file mode 100644
index a2bd3a3dbbc2..000000000000
--- a/target/linux/generic/hack-6.1/750-net-pcs-mtk-lynxi-workaround-2500BaseX-no-an.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 880d1311335120f64447ca9d11933872d734e19a Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 27 Mar 2023 18:41:54 +0100
-Subject: [PATCH] generic: pcs-mtk-lynxi: add hack to use 2500Base-X without AN
-
-Using 2500Base-T SFP modules e.g. on the BananaPi R3 requires manually
-disabling auto-negotiation, e.g. using ethtool. While a proper fix
-using SFP quirks is being discussed upstream, bring a work-around to
-restore user experience to what it was before the switch to the
-dedicated SGMII PCS driver.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-
---- a/drivers/net/pcs/pcs-mtk-lynxi.c
-+++ b/drivers/net/pcs/pcs-mtk-lynxi.c
-@@ -114,14 +114,23 @@ static void mtk_pcs_lynxi_get_state(stru
- 				    struct phylink_link_state *state)
- {
- 	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
--	unsigned int bm, adv;
-+	unsigned int bm, bmsr, adv;
- 
- 	/* Read the BMSR and LPA */
- 	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &bm);
--	regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv);
-+	bmsr = FIELD_GET(SGMII_BMSR, bm);
-+
-+	if (state->interface == PHY_INTERFACE_MODE_2500BASEX) {
-+		state->link = !!(bmsr & BMSR_LSTATUS);
-+		state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
-+		state->speed = SPEED_2500;
-+		state->duplex = DUPLEX_FULL;
- 
--	phylink_mii_c22_pcs_decode_state(state, FIELD_GET(SGMII_BMSR, bm),
--					 FIELD_GET(SGMII_LPA, adv));
-+		return;
-+	}
-+
-+	regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv);
-+	phylink_mii_c22_pcs_decode_state(state, bmsr, FIELD_GET(SGMII_LPA, adv));
- }
- 
- static void mtk_sgmii_reset(struct mtk_pcs_lynxi *mpcs)
-@@ -163,7 +172,8 @@ static int mtk_pcs_lynxi_config(struct p
- 	if (neg_mode & PHYLINK_PCS_NEG_INBAND)
- 		sgm_mode |= SGMII_REMOTE_FAULT_DIS;
- 
--	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED) {
-+	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED &&
-+	    interface != PHY_INTERFACE_MODE_2500BASEX) {
- 		if (interface == PHY_INTERFACE_MODE_SGMII)
- 			sgm_mode |= SGMII_SPEED_DUPLEX_AN;
- 		bmcr = BMCR_ANENABLE;
diff --git a/target/linux/generic/hack-6.1/760-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/generic/hack-6.1/760-net-usb-r8152-add-LED-configuration-from-OF.patch
deleted file mode 100644
index 48d4626ed632..000000000000
--- a/target/linux/generic/hack-6.1/760-net-usb-r8152-add-LED-configuration-from-OF.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 02:38:31 +0200
-Subject: [PATCH] net: usb: r8152: add LED configuration from OF
-
-This adds the ability to configure the LED configuration register using
-OF. This way, the correct value for board specific LED configuration can
-be determined.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -11,6 +11,7 @@
- #include <linux/mii.h>
- #include <linux/ethtool.h>
- #include <linux/usb.h>
-+#include <linux/of.h>
- #include <linux/crc32.h>
- #include <linux/if_vlan.h>
- #include <linux/uaccess.h>
-@@ -7034,6 +7035,22 @@ static void rtl_tally_reset(struct r8152
- 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
- }
- 
-+static int r8152_led_configuration(struct r8152 *tp)
-+{
-+	u32 led_data;
-+	int ret;
-+
-+	ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
-+								&led_data);
-+
-+	if (ret)
-+		return ret;
-+	
-+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
-+
-+	return 0;
-+}
-+
- static void r8152b_init(struct r8152 *tp)
- {
- 	u32 ocp_data;
-@@ -7075,6 +7092,8 @@ static void r8152b_init(struct r8152 *tp
- 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- 	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- 	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153_init(struct r8152 *tp)
-@@ -7215,6 +7234,8 @@ static void r8153_init(struct r8152 *tp)
- 		tp->coalesce = COALESCE_SLOW;
- 		break;
- 	}
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153b_init(struct r8152 *tp)
-@@ -7297,6 +7318,8 @@ static void r8153b_init(struct r8152 *tp
- 	rtl_tally_reset(tp);
- 
- 	tp->coalesce = 15000;	/* 15 us */
-+
-+	r8152_led_configuration(tp);
- }
- 
- static void r8153c_init(struct r8152 *tp)
diff --git a/target/linux/generic/hack-6.1/761-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/generic/hack-6.1/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
deleted file mode 100644
index be262b993cd5..000000000000
--- a/target/linux/generic/hack-6.1/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 15:30:33 +0200
-Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation
-
-Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet
-adapters.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../bindings/net/realtek,rtl8152.yaml         | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-@@ -0,0 +1,36 @@
-+# SPDX-License-Identifier: GPL-2.0
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek RTL8152/RTL8153 series USB ethernet
-+
-+maintainers:
-+  - David Bauer <mail@david-bauer.net>
-+
-+properties:
-+  compatible:
-+    oneOf:
-+      - items:
-+          - enum:
-+              - realtek,rtl8152
-+              - realtek,rtl8153
-+
-+  reg:
-+    description: The device number on the USB bus
-+
-+  realtek,led-data:
-+    description: Value to be written to the LED configuration register.
-+
-+required:
-+  - compatible
-+  - reg
-+
-+examples:
-+  - |
-+    usb-eth@2 {
-+      compatible = "realtek,rtl8153";
-+      reg = <2>;
-+      realtek,led-data = <0x87>;
-+    };
-\ No newline at end of file
diff --git a/target/linux/generic/hack-6.1/765-mxl-gpy-control-LED-reg-from-DT.patch b/target/linux/generic/hack-6.1/765-mxl-gpy-control-LED-reg-from-DT.patch
deleted file mode 100644
index 70851ec9acbb..000000000000
--- a/target/linux/generic/hack-6.1/765-mxl-gpy-control-LED-reg-from-DT.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 94b90966095f3fa625897e8f53d215882f6e19b3 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sat, 11 Mar 2023 17:00:01 +0100
-Subject: [PATCH] mxl-gpy: control LED reg from DT
-
-Add dynamic configuration for the LED control registers on MXL PHYs.
-
-This patch has been tested with MaxLinear GPY211C. It is unlikely to be
-accepted upstream, as upstream plans on integrating their own framework
-for handling these LEDs.
-
-For the time being, use this hack to configure PHY driven device-LEDs to
-show the correct state.
-
-A possible alternative might be to expose the LEDs using the kernel LED
-framework and bind it to the netdevice. This might also be upstreamable,
-although it is a considerable extra amount of work.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/net/phy/mxl-gpy.c | 37 ++++++++++++++++++++++++++++++++++++-
- 1 file changed, 36 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/mxl-gpy.c
-+++ b/drivers/net/phy/mxl-gpy.c
-@@ -10,6 +10,7 @@
- #include <linux/bitfield.h>
- #include <linux/hwmon.h>
- #include <linux/mutex.h>
-+#include <linux/of.h>
- #include <linux/phy.h>
- #include <linux/polynomial.h>
- #include <linux/netdevice.h>
-@@ -33,6 +34,7 @@
- #define PHY_MIISTAT		0x18	/* MII state */
- #define PHY_IMASK		0x19	/* interrupt mask */
- #define PHY_ISTAT		0x1A	/* interrupt status */
-+#define PHY_LED			0x1B	/* LED control */
- #define PHY_FWV			0x1E	/* firmware version */
- 
- #define PHY_MIISTAT_SPD_MASK	GENMASK(2, 0)
-@@ -56,10 +58,15 @@
- 				 PHY_IMASK_ADSC | \
- 				 PHY_IMASK_ANC)
- 
-+#define PHY_LED_NUM_LEDS	4
-+
- #define PHY_FWV_REL_MASK	BIT(15)
- #define PHY_FWV_MAJOR_MASK	GENMASK(11, 8)
- #define PHY_FWV_MINOR_MASK	GENMASK(7, 0)
- 
-+/* LED */
-+#define VSPEC1_LED(x)		(0x1 + x)
-+
- /* SGMII */
- #define VSPEC1_SGMII_CTRL	0x08
- #define VSPEC1_SGMII_CTRL_ANEN	BIT(12)		/* Aneg enable */
-@@ -258,10 +265,39 @@ out:
- 	return ret;
- }
- 
-+static int gpy_led_write(struct phy_device *phydev)
-+{
-+	struct device_node *node = phydev->mdio.dev.of_node;
-+	u32 led_regs[PHY_LED_NUM_LEDS];
-+	int i, ret;
-+	u16 val = 0xff00;
-+
-+	if (!IS_ENABLED(CONFIG_OF_MDIO))
-+		return 0;
-+
-+	if (of_property_read_u32_array(node, "mxl,led-config", led_regs, PHY_LED_NUM_LEDS))
-+		return 0;
-+
-+	if (of_property_read_bool(node, "mxl,led-drive-vdd"))
-+		val &= 0x0fff;
-+
-+	/* Enable LED function handling on all ports*/
-+	phy_write(phydev, PHY_LED, val);
-+
-+	/* Write LED register values */
-+	for (i = 0; i < PHY_LED_NUM_LEDS; i++) {
-+		ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_LED(i), (u16)led_regs[i]);
-+		if (ret < 0)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
- static int gpy_config_init(struct phy_device *phydev)
- {
- 	/* Nothing to configure. Configuration Requirement Placeholder */
--	return 0;
-+	return gpy_led_write(phydev);
- }
- 
- static bool gpy_has_broken_mdint(struct phy_device *phydev)
diff --git a/target/linux/generic/hack-6.1/766-net-phy-mediatek-ge-add-LED-configuration-interface.patch b/target/linux/generic/hack-6.1/766-net-phy-mediatek-ge-add-LED-configuration-interface.patch
deleted file mode 100644
index 3405d5c535b6..000000000000
--- a/target/linux/generic/hack-6.1/766-net-phy-mediatek-ge-add-LED-configuration-interface.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From cc225d163b5a4f7a0d1968298bf7927306646a47 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 28 Apr 2023 01:53:01 +0200
-Subject: [PATCH] net: phy: mediatek-ge: add LED configuration interface
-
-This adds a small hack similar to the one used for ar8xxx switches to
-read a reg:value map for configuring the LED configuration registers.
-
-This allows OpenWrt to write device-specific LED action as well as blink
-configurations. It is unlikely to be accepted upstream, as upstream
-plans on integrating their own framework for handling these LEDs.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/net/phy/mediatek-ge.c | 33 +++++++++++++++++++++++++++++++++
- 1 file changed, 33 insertions(+)
-
---- a/drivers/net/phy/mediatek-ge.c
-+++ b/drivers/net/phy/mediatek-ge.c
-@@ -1,4 +1,5 @@
- // SPDX-License-Identifier: GPL-2.0+
-+#include <linux/of.h>
- #include <linux/bitfield.h>
- #include <linux/module.h>
- #include <linux/phy.h>
-@@ -53,6 +54,36 @@ static int mt7530_phy_config_init(struct
- 	return 0;
- }
- 
-+static int mt7530_led_config_of(struct phy_device *phydev)
-+{
-+	struct device_node *np = phydev->mdio.dev.of_node;
-+	const __be32 *paddr;
-+	int len;
-+	int i;
-+
-+	paddr = of_get_property(np, "mediatek,led-config", &len);
-+	if (!paddr)
-+		return 0;
-+
-+	if (len < (2 * sizeof(*paddr)))
-+		return -EINVAL;
-+
-+	len /= sizeof(*paddr);
-+
-+	phydev_warn(phydev, "Configure LED registers (num=%d)\n", len);
-+	for (i = 0; i < len - 1; i += 2) {
-+		u32 reg;
-+		u32 val;
-+
-+		reg = be32_to_cpup(paddr + i);
-+		val = be32_to_cpup(paddr + i + 1);
-+
-+		phy_write_mmd(phydev, MDIO_MMD_VEND2, reg, val);
-+	}
-+
-+	return 0;
-+}
-+
- static int mt7531_phy_config_init(struct phy_device *phydev)
- {
- 	mtk_gephy_config_init(phydev);
-@@ -65,6 +96,9 @@ static int mt7531_phy_config_init(struct
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
- 	phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
- 
-+	/* LED Config*/
-+	mt7530_led_config_of(phydev);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/hack-6.1/773-bgmac-add-srab-switch.patch b/target/linux/generic/hack-6.1/773-bgmac-add-srab-switch.patch
deleted file mode 100644
index 633cacd1e7c3..000000000000
--- a/target/linux/generic/hack-6.1/773-bgmac-add-srab-switch.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 3cb240533ab787899dc7f17aa7d6c5b4810e2e58 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 7 Jul 2017 17:26:01 +0200
-Subject: bcm53xx: bgmac: use srab switch driver
-
-use the srab switch driver on these SoCs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c |  1 +
- drivers/net/ethernet/broadcom/bgmac.c      | 24 ++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/bgmac.h      |  4 ++++
- 3 files changed, 29 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -280,6 +280,7 @@ static int bgmac_probe(struct bcma_devic
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
- 		bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
- 		bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
-+		bgmac->feature_flags |= BGMAC_FEAT_SRAB;
- 		break;
- 	default:
- 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -12,6 +12,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/etherdevice.h>
- #include <linux/interrupt.h>
-+#include <linux/platform_data/b53.h>
- #include <linux/bcm47xx_nvram.h>
- #include <linux/phy.h>
- #include <linux/phy_fixed.h>
-@@ -1408,6 +1409,17 @@ static const struct ethtool_ops bgmac_et
- 	.set_link_ksettings     = phy_ethtool_set_link_ksettings,
- };
- 
-+static struct b53_platform_data bgmac_b53_pdata = {
-+};
-+
-+static struct platform_device bgmac_b53_dev = {
-+	.name		= "b53-srab-switch",
-+	.id		= -1,
-+	.dev		= {
-+		.platform_data = &bgmac_b53_pdata,
-+	},
-+};
-+
- /**************************************************
-  * MII
-  **************************************************/
-@@ -1546,6 +1558,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
- 
- 	bgmac->in_init = false;
- 
-+	if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) {
-+		bgmac_b53_pdata.regs = ioremap(0x18007000, 0x1000);
-+
-+		err = platform_device_register(&bgmac_b53_dev);
-+		if (!err)
-+			bgmac->b53_device = &bgmac_b53_dev;
-+	}
-+
- 	err = register_netdev(bgmac->net_dev);
- 	if (err) {
- 		dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1568,6 +1588,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
- 
- void bgmac_enet_remove(struct bgmac *bgmac)
- {
-+	if (bgmac->b53_device)
-+		platform_device_unregister(&bgmac_b53_dev);
-+	bgmac->b53_device = NULL;
-+
- 	unregister_netdev(bgmac->net_dev);
- 	phy_disconnect(bgmac->net_dev->phydev);
- 	netif_napi_del(&bgmac->napi);
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -388,6 +388,7 @@
- #define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII	BIT(18)
- #define BGMAC_FEAT_CC7_IF_TYPE_RGMII	BIT(19)
- #define BGMAC_FEAT_IDM_MASK		BIT(20)
-+#define BGMAC_FEAT_SRAB			BIT(21)
- 
- struct bgmac_slot_info {
- 	union {
-@@ -495,6 +496,9 @@ struct bgmac {
- 	void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask,
- 			      u32 set);
- 	int (*phy_connect)(struct bgmac *bgmac);
-+
-+	/* platform device for associated switch */
-+	struct platform_device *b53_device;
- };
- 
- struct bgmac *bgmac_alloc(struct device *dev);
diff --git a/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch b/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch
deleted file mode 100644
index 6e318a6e9a9d..000000000000
--- a/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From f81700b6bb2eda3756247bce472d8eaf6f466f61 Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 13:49:26 +0200
-Subject: [PATCH] net/usb/qmi_wwan: add MeigLink modem support
-
----
- drivers/net/usb/qmi_wwan.c  | 1 +
- drivers/usb/serial/option.c | 7 +++++++
- 2 files changed, 8 insertions(+)
-
---- a/drivers/net/usb/qmi_wwan.c
-+++ b/drivers/net/usb/qmi_wwan.c
-@@ -1083,12 +1083,18 @@ static const struct usb_device_id produc
- 		USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x581d, USB_CLASS_VENDOR_SPEC, 1, 7),
- 		.driver_info = (unsigned long)&qmi_wwan_info,
- 	},
-+	{	/* Meiglink SGM828 */
-+		USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d49, USB_CLASS_VENDOR_SPEC, 0x10, 0x05),
-+		.driver_info = (unsigned long)&qmi_wwan_info,
-+	},
-+
- 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0125)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */
- 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0306)},	/* Quectel EP06/EG06/EM06 */
- 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)},	/* Quectel EG12/EM12 */
- 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)},	/* Quectel EM160R-GL */
- 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)},	/* Quectel RM500Q-GL */
- 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0801)},	/* Quectel RM520N */
-+	{QMI_MATCH_FF_FF_FF(0x05c6, 0xf601)},	/* MeigLink SLM750 */
- 
- 	/* 3. Combined interface devices matching on interface number */
- 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
---- a/drivers/usb/serial/option.c
-+++ b/drivers/usb/serial/option.c
-@@ -247,6 +247,11 @@ static void option_instat_callback(struc
- #define UBLOX_PRODUCT_R410M			0x90b2
- /* These Yuga products use Qualcomm's vendor ID */
- #define YUGA_PRODUCT_CLM920_NC5			0x9625
-+/* These MeigLink products use Qualcomm's vendor ID */
-+#define MEIGLINK_PRODUCT_SLM750			0xf601
-+
-+#define MEIGLINK_VENDOR_ID			0x2dee
-+#define MEIGLINK_PRODUCT_SLM828			0x4d49
- 
- #define QUECTEL_VENDOR_ID			0x2c7c
- /* These Quectel products use Quectel's vendor ID */
-@@ -1158,6 +1163,11 @@ static const struct usb_device_id option
- 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
- 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */
- 	  .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) },
-+	/* MeiG */
-+	{ USB_DEVICE_AND_INTERFACE_INFO(MEIGLINK_VENDOR_ID, MEIGLINK_PRODUCT_SLM828, USB_CLASS_VENDOR_SPEC, 0x10, 0x01) },
-+	{ USB_DEVICE_AND_INTERFACE_INFO(MEIGLINK_VENDOR_ID, MEIGLINK_PRODUCT_SLM828, USB_CLASS_VENDOR_SPEC, 0x10, 0x02) },
-+	{ USB_DEVICE_AND_INTERFACE_INFO(MEIGLINK_VENDOR_ID, MEIGLINK_PRODUCT_SLM828, USB_CLASS_VENDOR_SPEC, 0x10, 0x03) },
-+	{ USB_DEVICE_AND_INTERFACE_INFO(MEIGLINK_VENDOR_ID, MEIGLINK_PRODUCT_SLM828, USB_CLASS_VENDOR_SPEC, 0x10, 0x04) },
- 	/* Quectel products using Qualcomm vendor ID */
- 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
- 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
-@@ -1199,6 +1209,11 @@ static const struct usb_device_id option
- 	  .driver_info = ZLP },
- 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
- 	  .driver_info = RSVD(4) },
-+	/* Meiglink products using Qualcomm vendor ID */
-+	// Works OK. In case of some issues check macros that are used by Quectel Products
-+	{ USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, MEIGLINK_PRODUCT_SLM750, 0xff, 0xff, 0xff),
-+	  .driver_info = NUMEP2 },
-+	{ USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, MEIGLINK_PRODUCT_SLM750, 0xff, 0, 0) },
- 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
- 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
- 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
diff --git a/target/linux/generic/hack-6.1/781-usb-net-rndis-support-asr.patch b/target/linux/generic/hack-6.1/781-usb-net-rndis-support-asr.patch
deleted file mode 100644
index 47339b6c22f7..000000000000
--- a/target/linux/generic/hack-6.1/781-usb-net-rndis-support-asr.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 9fabf60187f1fa19e6f6bb5441587d485bd534b0 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 9 Apr 2024 17:06:38 +0100
-Subject: [PATCH] rndis_host: add a bunch of USB IDs
-
-Add a bunch of USB IDs found in various places online to the
-RNDIS USB network driver.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/usb/rndis_host.c | 40 ++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
-
---- a/drivers/net/usb/rndis_host.c
-+++ b/drivers/net/usb/rndis_host.c
-@@ -630,6 +630,16 @@ static const struct driver_info	zte_rndi
- 	.tx_fixup =	rndis_tx_fixup,
- };
- 
-+static const struct driver_info asr_rndis_info = {
-+	.description =	"Asr RNDIS device",
-+	.flags =	FLAG_WWAN | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT | FLAG_NOARP,
-+	.bind =		rndis_bind,
-+	.unbind =	rndis_unbind,
-+	.status =	rndis_status,
-+	.rx_fixup =	rndis_rx_fixup,
-+	.tx_fixup =	rndis_tx_fixup,
-+};
-+
- /*-------------------------------------------------------------------------*/
- 
- static const struct usb_device_id	products [] = {
-@@ -666,6 +676,36 @@ static const struct usb_device_id	produc
- 	USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
- 	.driver_info = (unsigned long) &rndis_info,
- }, {
-+	/* Quectel EG060V rndis device */
-+	USB_DEVICE_AND_INTERFACE_INFO(0x2c7c, 0x6004,
-+				      USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
-+	.driver_info = (unsigned long) &asr_rndis_info,
-+}, {
-+	/* Quectel EC200A rndis device */
-+	USB_DEVICE_AND_INTERFACE_INFO(0x2c7c, 0x6005,
-+				      USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
-+	.driver_info = (unsigned long) &asr_rndis_info,
-+}, {
-+	/* Quectel EC200T rndis device */
-+	USB_DEVICE_AND_INTERFACE_INFO(0x2c7c, 0x6026,
-+				      USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
-+	.driver_info = (unsigned long) &asr_rndis_info,
-+}, {
-+	/* Simcom A7906E rndis device */
-+	USB_DEVICE_AND_INTERFACE_INFO(0x1e0e, 0x9011,
-+				      USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
-+	.driver_info = (unsigned long) &asr_rndis_info,
-+}, {
-+	/* Meig SLM770A */
-+	USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d57,
-+				      USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
-+	.driver_info = (unsigned long) &asr_rndis_info,
-+}, {
-+	/* Meig SLM828 */
-+	USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d49,
-+				      USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
-+	.driver_info = (unsigned long) &asr_rndis_info,
-+}, {
- 	/* Novatel Verizon USB730L */
- 	USB_INTERFACE_INFO(USB_CLASS_MISC, 4, 1),
- 	.driver_info = (unsigned long) &rndis_info,
diff --git a/target/linux/generic/hack-6.1/790-SFP-GE-T-ignore-TX_FAULT.patch b/target/linux/generic/hack-6.1/790-SFP-GE-T-ignore-TX_FAULT.patch
deleted file mode 100644
index 53f199d09b7f..000000000000
--- a/target/linux/generic/hack-6.1/790-SFP-GE-T-ignore-TX_FAULT.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 7cc39a6bedbd85f3ff7e16845f310e4ce8d9833f Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 6 Sep 2022 00:31:19 +0100
-Subject: [PATCH] net: sfp: add quirk for ATS SFP-GE-T 1000Base-TX module
-To: netdev@vger.kernel.org,
-    linux-kernel@vger.kernel.org,
-    Russell King <linux@armlinux.org.uk>,
-    Andrew Lunn <andrew@lunn.ch>,
-    Heiner Kallweit <hkallweit1@gmail.com>
-Cc: David S. Miller <davem@davemloft.net>,
-    Eric Dumazet <edumazet@google.com>,
-    Jakub Kicinski <kuba@kernel.org>,
-    Paolo Abeni <pabeni@redhat.com>,
-    Josef Schlehofer <pepe.schlehofer@gmail.com>
-
-This copper module comes with broken TX_FAULT indicator which must be
-ignored for it to work. Implement ignoring TX_FAULT state bit also
-during reset/insertion and mute the warning telling the user that the
-module indicates TX_FAULT.
-
-Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/sfp.c | 14 +++++++++++---
- 1 file changed, 11 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -409,6 +409,9 @@ static const struct sfp_quirk sfp_quirks
- 	SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,
- 		  sfp_fixup_ignore_tx_fault),
- 
-+	// OEM SFP-GE-T is 1000Base-T module
-+	SFP_QUIRK_F("OEM", "SFP-GE-T", sfp_fixup_ignore_tx_fault),
-+
- 	// Lantech 8330-262D-E can operate at 2500base-X, but incorrectly report
- 	// 2500MBd NRZ in their EEPROM
- 	SFP_QUIRK_M("Lantech", "8330-262D-E", sfp_quirk_2500basex),
-@@ -2343,7 +2346,8 @@ static void sfp_sm_main(struct sfp *sfp,
- 			 * or t_start_up, so assume there is a fault.
- 			 */
- 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
--				     sfp->sm_fault_retries == N_FAULT_INIT);
-+				     !sfp->tx_fault_ignore &&
-+				     (sfp->sm_fault_retries == N_FAULT_INIT));
- 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
- 	init_done:
- 			/* Create mdiobus and start trying for PHY */
-@@ -2577,10 +2581,12 @@ static void sfp_check_state(struct sfp *
- 	mutex_lock(&sfp->st_mutex);
- 	state = sfp_get_state(sfp);
- 	changed = state ^ sfp->state;
--	if (sfp->tx_fault_ignore)
-+	if (sfp->tx_fault_ignore) {
- 		changed &= SFP_F_PRESENT | SFP_F_LOS;
--	else
-+		state &= ~SFP_F_TX_FAULT;
-+	} else {
- 		changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
-+	}
- 
- 	for (i = 0; i < GPIO_MAX; i++)
- 		if (changed & BIT(i))
diff --git a/target/linux/generic/hack-6.1/800-GPIO-add-named-gpio-exports.patch b/target/linux/generic/hack-6.1/800-GPIO-add-named-gpio-exports.patch
deleted file mode 100644
index b60b428dc8a8..000000000000
--- a/target/linux/generic/hack-6.1/800-GPIO-add-named-gpio-exports.patch
+++ /dev/null
@@ -1,190 +0,0 @@
-From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 30/36] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -19,6 +19,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
- 
- #include "gpiolib.h"
- #include "gpiolib-of.h"
-@@ -1030,3 +1032,100 @@ void of_gpio_dev_init(struct gpio_chip *
- 	else
- 		gc->of_node = gdev->dev.of_node;
- }
-+
-+#ifdef CONFIG_GPIO_SYSFS
-+
-+static struct of_device_id gpio_export_ids[] = {
-+	{ .compatible = "gpio-export" },
-+	{ /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct device_node *cnp;
-+	u32 val;
-+	int nb = 0;
-+
-+	for_each_child_of_node(np, cnp) {
-+		const char *name = NULL;
-+		int gpio;
-+		bool dmc;
-+		int max_gpio = 1;
-+		int i;
-+
-+		of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+		if (!name)
-+			max_gpio = of_gpio_count(cnp);
-+
-+		for (i = 0; i < max_gpio; i++) {
-+			struct gpio_desc *desc;
-+			unsigned flags = 0;
-+			enum of_gpio_flags of_flags;
-+
-+			gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+			if (!gpio_is_valid(gpio))
-+				return gpio;
-+
-+			if (of_flags & OF_GPIO_ACTIVE_LOW)
-+				flags |= GPIOF_ACTIVE_LOW;
-+
-+			if (!of_property_read_u32(cnp, "gpio-export,output", &val)) {
-+				if (of_flags & OF_GPIO_SINGLE_ENDED) {
-+					/*
-+					 * As gpiod_direction_output_raw() is used, we
-+					 * need to emulate open drain or open source here.
-+					 */
-+					if (of_flags & OF_GPIO_OPEN_DRAIN) {
-+						flags |= GPIOF_OPEN_DRAIN;
-+						flags |= val ? GPIOF_IN : GPIOF_OUT_INIT_LOW;
-+					} else {
-+						flags |= GPIOF_OPEN_SOURCE;
-+						flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_IN;
-+					}
-+				} else {
-+					flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+				}
-+			} else {
-+				flags |= GPIOF_IN;
-+			}
-+
-+			if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+				continue;
-+
-+			/*
-+			 * When emulating open-source or open-drain functionalities by not
-+			 * actively driving the line (setting mode to input) we still need to
-+			 * set the IS_OUT flag or otherwise we won't be able to set the line
-+			 * value anymore.
-+			 */
-+			if ((flags & GPIOF_IN) &&
-+			    ((flags & GPIOF_OPEN_DRAIN) || (flags & GPIOF_OPEN_SOURCE))) {
-+				desc = gpio_to_desc(gpio);
-+				set_bit(FLAG_IS_OUT, &desc->flags);
-+			}
-+
-+			dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+			gpio_export_with_name(gpio, dmc, name);
-+			nb++;
-+		}
-+	}
-+
-+	dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+	.driver		= {
-+		.name		= "gpio-export",
-+		.owner	= THIS_MODULE,
-+		.of_match_table	= of_match_ptr(gpio_export_ids),
-+	},
-+	.probe		= of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
-+
-+#endif
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -125,6 +125,12 @@ static inline int gpio_export(unsigned g
- 	return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
- 
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+	return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- 				   unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -715,6 +715,7 @@ static inline struct gpio_desc *acpi_get
- 
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
- 
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- 		      struct gpio_desc *desc);
-@@ -722,6 +723,13 @@ void gpiod_unexport(struct gpio_desc *de
- 
- #else  /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
- 
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+			       bool direction_may_change,
-+			       const char *name)
-+{
-+	return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- 			       bool direction_may_change)
- {
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -547,7 +547,7 @@ static struct class gpio_class = {
-  *
-  * Returns zero on success, else an error.
-  */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- 	struct gpio_chip	*chip;
- 	struct gpio_device	*gdev;
-@@ -609,6 +609,8 @@ int gpiod_export(struct gpio_desc *desc,
- 	offset = gpio_chip_hwgpio(desc);
- 	if (chip->names && chip->names[offset])
- 		ioname = chip->names[offset];
-+	if (name)
-+		ioname = name;
- 
- 	dev = device_create_with_groups(&gpio_class, &gdev->dev,
- 					MKDEV(0, 0), data, gpio_groups,
-@@ -630,6 +632,12 @@ err_unlock:
- 	gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- 	return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+	return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
- 
- static int match_export(struct device *dev, const void *desc)
diff --git a/target/linux/generic/hack-6.1/810-bcma-ssb-fallback-sprom.patch b/target/linux/generic/hack-6.1/810-bcma-ssb-fallback-sprom.patch
deleted file mode 100644
index c581a512cbd5..000000000000
--- a/target/linux/generic/hack-6.1/810-bcma-ssb-fallback-sprom.patch
+++ /dev/null
@@ -1,187 +0,0 @@
-From e4d708702e6c98f2111e33201a264d6788564cb2 Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Fri, 12 May 2023 11:08:43 +0200
-Subject: [PATCH] ssb_sprom: add generic kernel support for Broadcom  Fallback SPROMs
-
----
- drivers/bcma/Kconfig        |  4 ++++
- drivers/bcma/Makefile       |  1 +
- drivers/bcma/bcma_private.h |  4 ++++
- drivers/bcma/main.c         |  8 ++++++++
- drivers/bcma/sprom.c        | 23 ++++++++++++++---------
- drivers/ssb/Kconfig         |  5 +++++
- drivers/ssb/Makefile        |  1 +
- drivers/ssb/main.c          |  8 ++++++++
- drivers/ssb/sprom.c         | 12 +++++++++++-
- drivers/ssb/ssb_private.h   |  4 ++++
- 10 files changed, 60 insertions(+), 10 deletions(-)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -18,6 +18,10 @@ config BCMA_BLOCKIO
- 	bool
- 	default y
- 
-+config BCMA_FALLBACK_SPROM
-+	bool
-+	default y
-+
- config BCMA_HOST_PCI_POSSIBLE
- 	bool
- 	depends on PCI = y
---- a/drivers/bcma/Makefile
-+++ b/drivers/bcma/Makefile
-@@ -11,6 +11,7 @@ bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)
- bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
- bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN)	+= driver_gmac_cmn.o
- bcma-$(CONFIG_BCMA_DRIVER_GPIO)		+= driver_gpio.o
-+bcma-$(CONFIG_BCMA_FALLBACK_SPROM)	+= fallback-sprom.o
- bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
- bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
- obj-$(CONFIG_BCMA)			+= bcma.o
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -38,6 +38,10 @@ int bcma_bus_resume(struct bcma_bus *bus
- void bcma_detect_chip(struct bcma_bus *bus);
- int bcma_bus_scan(struct bcma_bus *bus);
- 
-+/* fallback-sprom.c */
-+int __init bcma_fbs_register(void);
-+int bcma_get_fallback_sprom(struct bcma_bus *dev, struct ssb_sprom *out);
-+
- /* sprom.c */
- int bcma_sprom_get(struct bcma_bus *bus);
- 
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -668,6 +668,14 @@ static int __init bcma_modinit(void)
- {
- 	int err;
- 
-+#ifdef CONFIG_BCMA_FALLBACK_SPROM
-+	err = bcma_fbs_register();
-+	if (err) {
-+		pr_err("Fallback SPROM initialization failed\n");
-+		err = 0;
-+	}
-+#endif /* CONFIG_BCMA_FALLBACK_SPROM */
-+
- 	err = bcma_init_bus_register();
- 	if (err)
- 		return err;
---- a/drivers/bcma/sprom.c
-+++ b/drivers/bcma/sprom.c
-@@ -51,21 +51,26 @@ static int bcma_fill_sprom_with_fallback
- {
- 	int err;
- 
--	if (!get_fallback_sprom) {
-+	if (get_fallback_sprom)
-+		err = get_fallback_sprom(bus, out);
-+
-+#ifdef CONFIG_BCMA_FALLBACK_SPROM
-+	if (!get_fallback_sprom || err)
-+		err = bcma_get_fallback_sprom(bus, out);
-+#else
-+	if (!get_fallback_sprom)
- 		err = -ENOENT;
--		goto fail;
--	}
-+#endif /* CONFIG_BCMA_FALLBACK_SPROM */
- 
--	err = get_fallback_sprom(bus, out);
--	if (err)
--		goto fail;
-+	if (err) {
-+		bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err);
-+		return err;
-+	}
- 
- 	bcma_debug(bus, "Using SPROM revision %d provided by platform.\n",
- 		   bus->sprom.revision);
-+
- 	return 0;
--fail:
--	bcma_warn(bus, "Using fallback SPROM failed (err %d)\n", err);
--	return err;
- }
- 
- /**************************************************
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -25,6 +25,11 @@ if SSB
- config SSB_SPROM
- 	bool
- 
-+config SSB_FALLBACK_SPROM
-+	bool
-+	depends on SSB_PCIHOST
-+	default y
-+
- # Support for Block-I/O. SELECT this from the driver that needs it.
- config SSB_BLOCKIO
- 	bool
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -2,6 +2,7 @@
- # core
- ssb-y					+= main.o scan.o
- ssb-$(CONFIG_SSB_EMBEDDED)		+= embedded.o
-+ssb-$(CONFIG_SSB_FALLBACK_SPROM)	+= fallback-sprom.o
- ssb-$(CONFIG_SSB_SPROM)			+= sprom.o
- 
- # host support
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -1287,6 +1287,14 @@ static int __init ssb_modinit(void)
- {
- 	int err;
- 
-+#ifdef CONFIG_SSB_FALLBACK_SPROM
-+	err = ssb_fbs_register();
-+	if (err) {
-+		pr_err("Fallback SPROM initialization failed\n");
-+		err = 0;
-+	}
-+#endif /* CONFIG_SSB_FALLBACK_SPROM */
-+
- 	/* See the comment at the ssb_is_early_boot definition */
- 	ssb_is_early_boot = 0;
- 	err = bus_register(&ssb_bustype);
---- a/drivers/ssb/sprom.c
-+++ b/drivers/ssb/sprom.c
-@@ -180,10 +180,20 @@ int ssb_arch_register_fallback_sprom(int
- 
- int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out)
- {
-+	int err;
-+
-+	if (get_fallback_sprom)
-+		err = get_fallback_sprom(bus, out);
-+
-+#ifdef CONFIG_SSB_FALLBACK_SPROM
-+	if (!get_fallback_sprom || err)
-+		err = ssb_get_fallback_sprom(bus, out);
-+#else
- 	if (!get_fallback_sprom)
- 		return -ENOENT;
-+#endif /* CONFIG_SSB_FALLBACK_SPROM */
- 
--	return get_fallback_sprom(bus, out);
-+	return err;
- }
- 
- /* https://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -143,6 +143,10 @@ extern int ssb_bus_scan(struct ssb_bus *
- extern void ssb_iounmap(struct ssb_bus *ssb);
- 
- 
-+/* fallback-sprom.c */
-+int __init ssb_fbs_register(void);
-+int ssb_get_fallback_sprom(struct ssb_bus *dev, struct ssb_sprom *out);
-+
- /* sprom.c */
- extern
- ssize_t ssb_attr_sprom_show(struct ssb_bus *bus, char *buf,
diff --git a/target/linux/generic/hack-6.1/901-debloat_sock_diag.patch b/target/linux/generic/hack-6.1/901-debloat_sock_diag.patch
deleted file mode 100644
index 09b59478aae2..000000000000
--- a/target/linux/generic/hack-6.1/901-debloat_sock_diag.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From 3b6115d6b57a263bdc8c9b1df273bd4a7955eead Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:16:31 +0200
-Subject: debloat: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/Kconfig         | 3 +++
- net/core/Makefile   | 3 ++-
- net/core/sock.c     | 2 ++
- net/ipv4/Kconfig    | 1 +
- net/netlink/Kconfig | 1 +
- net/packet/Kconfig  | 1 +
- net/unix/Kconfig    | 1 +
- 7 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -104,6 +104,9 @@ source "net/mptcp/Kconfig"
- 
- endif # if INET
- 
-+config SOCK_DIAG
-+	bool
-+
- config NETWORK_SECMARK
- 	bool "Security Marking"
- 	help
---- a/net/core/Makefile
-+++ b/net/core/Makefile
-@@ -11,11 +11,12 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.
- 
- obj-y		     += dev.o dev_addr_lists.o dst.o netevent.o \
- 			neighbour.o rtnetlink.o utils.o link_watch.o filter.o \
--			sock_diag.o dev_ioctl.o tso.o sock_reuseport.o \
-+ 			dev_ioctl.o tso.o sock_reuseport.o \
- 			fib_notifier.o xdp.o flow_offload.o gro.o
- 
- obj-$(CONFIG_NETDEV_ADDR_LIST_TEST) += dev_addr_lists_test.o
- 
-+obj-$(CONFIG_SOCK_DIAG) += sock_diag.o
- obj-y += net-sysfs.o
- obj-$(CONFIG_PAGE_POOL) += page_pool.o
- obj-$(CONFIG_PROC_FS) += net-procfs.o
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -115,6 +115,7 @@
- #include <linux/memcontrol.h>
- #include <linux/prefetch.h>
- #include <linux/compat.h>
-+#include <linux/cookie.h>
- 
- #include <linux/uaccess.h>
- 
-@@ -146,6 +147,7 @@
- 
- static DEFINE_MUTEX(proto_list_mutex);
- static LIST_HEAD(proto_list);
-+DEFINE_COOKIE(sock_cookie);
- 
- static void sock_def_write_space_wfree(struct sock *sk);
- static void sock_def_write_space(struct sock *sk);
-@@ -586,6 +588,18 @@ discard_and_relse:
- }
- EXPORT_SYMBOL(__sk_receive_skb);
- 
-+u64 __sock_gen_cookie(struct sock *sk)
-+{
-+	while (1) {
-+		u64 res = atomic64_read(&sk->sk_cookie);
-+
-+		if (res)
-+			return res;
-+		res = gen_cookie_next(&sock_cookie);
-+		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
-+	}
-+}
-+
- INDIRECT_CALLABLE_DECLARE(struct dst_entry *ip6_dst_check(struct dst_entry *,
- 							  u32));
- INDIRECT_CALLABLE_DECLARE(struct dst_entry *ipv4_dst_check(struct dst_entry *,
-@@ -2189,9 +2203,11 @@ static void __sk_free(struct sock *sk)
- 	if (likely(sk->sk_net_refcnt))
- 		sock_inuse_add(sock_net(sk), -1);
- 
-+#ifdef CONFIG_SOCK_DIAG
- 	if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
- 		sock_diag_broadcast_destroy(sk);
- 	else
-+#endif
- 		sk_destruct(sk);
- }
- 
---- a/net/core/sock_diag.c
-+++ b/net/core/sock_diag.c
-@@ -12,7 +12,6 @@
- #include <linux/tcp.h>
- #include <linux/workqueue.h>
- #include <linux/nospec.h>
--#include <linux/cookie.h>
- #include <linux/inet_diag.h>
- #include <linux/sock_diag.h>
- 
-@@ -21,20 +20,6 @@ static int (*inet_rcv_compat)(struct sk_
- static DEFINE_MUTEX(sock_diag_table_mutex);
- static struct workqueue_struct *broadcast_wq;
- 
--DEFINE_COOKIE(sock_cookie);
--
--u64 __sock_gen_cookie(struct sock *sk)
--{
--	while (1) {
--		u64 res = atomic64_read(&sk->sk_cookie);
--
--		if (res)
--			return res;
--		res = gen_cookie_next(&sock_cookie);
--		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
--	}
--}
--
- int sock_diag_check_cookie(struct sock *sk, const __u32 *cookie)
- {
- 	u64 res;
---- a/net/ipv4/Kconfig
-+++ b/net/ipv4/Kconfig
-@@ -423,6 +423,7 @@ config INET_TUNNEL
- 
- config INET_DIAG
- 	tristate "INET: socket monitoring interface"
-+	select SOCK_DIAG
- 	default y
- 	help
- 	  Support for INET (TCP, DCCP, etc) socket monitoring interface used by
---- a/net/netlink/Kconfig
-+++ b/net/netlink/Kconfig
-@@ -5,6 +5,7 @@
- 
- config NETLINK_DIAG
- 	tristate "NETLINK: socket monitoring interface"
-+	select SOCK_DIAG
- 	default n
- 	help
- 	  Support for NETLINK socket monitoring interface used by the ss tool.
---- a/net/packet/Kconfig
-+++ b/net/packet/Kconfig
-@@ -19,6 +19,7 @@ config PACKET
- config PACKET_DIAG
- 	tristate "Packet: sockets monitoring interface"
- 	depends on PACKET
-+	select SOCK_DIAG
- 	default n
- 	help
- 	  Support for PF_PACKET sockets monitoring interface used by the ss tool.
---- a/net/unix/Kconfig
-+++ b/net/unix/Kconfig
-@@ -33,6 +33,7 @@ config	AF_UNIX_OOB
- config UNIX_DIAG
- 	tristate "UNIX: socket monitoring interface"
- 	depends on UNIX
-+	select SOCK_DIAG
- 	default n
- 	help
- 	  Support for UNIX socket monitoring interface used by the ss tool.
---- a/net/xdp/Kconfig
-+++ b/net/xdp/Kconfig
-@@ -10,6 +10,7 @@ config XDP_SOCKETS
- config XDP_SOCKETS_DIAG
- 	tristate "XDP sockets: monitoring interface"
- 	depends on XDP_SOCKETS
-+	select SOCK_DIAG
- 	default n
- 	help
- 	  Support for PF_XDP sockets monitoring interface used by the ss tool.
diff --git a/target/linux/generic/hack-6.1/902-debloat_proc.patch b/target/linux/generic/hack-6.1/902-debloat_proc.patch
deleted file mode 100644
index 2bc86fa1e27f..000000000000
--- a/target/linux/generic/hack-6.1/902-debloat_proc.patch
+++ /dev/null
@@ -1,419 +0,0 @@
-From 9e3f1d0805b2d919904dd9a4ff0d956314cc3cba Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:09 +0200
-Subject: debloat: procfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/locks.c               |  2 ++
- fs/proc/Kconfig          |  5 +++++
- fs/proc/consoles.c       |  3 +++
- fs/proc/proc_tty.c       | 11 ++++++++++-
- include/net/snmp.h       | 18 +++++++++++++++++-
- ipc/msg.c                |  3 +++
- ipc/sem.c                |  2 ++
- ipc/shm.c                |  2 ++
- ipc/util.c               |  3 +++
- kernel/exec_domain.c     |  2 ++
- kernel/irq/proc.c        |  9 +++++++++
- kernel/time/timer_list.c |  2 ++
- mm/vmalloc.c             |  2 ++
- mm/vmstat.c              |  8 +++++---
- net/8021q/vlanproc.c     |  6 ++++++
- net/core/net-procfs.c    | 18 ++++++++++++------
- net/core/sock.c          |  2 ++
- net/ipv4/fib_trie.c      | 18 ++++++++++++------
- net/ipv4/proc.c          |  3 +++
- net/ipv4/route.c         |  3 +++
- 20 files changed, 105 insertions(+), 17 deletions(-)
-
---- a/fs/locks.c
-+++ b/fs/locks.c
-@@ -2907,6 +2907,8 @@ static const struct seq_operations locks
- 
- static int __init proc_locks_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create_seq_private("locks", 0, NULL, &locks_seq_operations,
- 			sizeof(struct locks_iterator), NULL);
- 	return 0;
---- a/fs/proc/Kconfig
-+++ b/fs/proc/Kconfig
-@@ -101,6 +101,11 @@ config PROC_CHILDREN
- 	  Say Y if you are running any user-space software which takes benefit from
- 	  this interface. For example, rkt is such a piece of software.
- 
-+config PROC_STRIPPED
-+	default n
-+	depends on EXPERT
-+	bool "Strip non-essential /proc functionality to reduce code size"
-+
- config PROC_PID_ARCH_STATUS
- 	def_bool n
- 	depends on PROC_FS
---- a/fs/proc/consoles.c
-+++ b/fs/proc/consoles.c
-@@ -92,6 +92,9 @@ static const struct seq_operations conso
- 
- static int __init proc_consoles_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	proc_create_seq("consoles", 0, NULL, &consoles_op);
- 	return 0;
- }
---- a/fs/proc/proc_tty.c
-+++ b/fs/proc/proc_tty.c
-@@ -131,7 +131,10 @@ static const struct seq_operations tty_d
- void proc_tty_register_driver(struct tty_driver *driver)
- {
- 	struct proc_dir_entry *ent;
--		
-+
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!driver->driver_name || driver->proc_entry ||
- 	    !driver->ops->proc_show)
- 		return;
-@@ -148,6 +151,9 @@ void proc_tty_unregister_driver(struct t
- {
- 	struct proc_dir_entry *ent;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ent = driver->proc_entry;
- 	if (!ent)
- 		return;
-@@ -162,6 +168,9 @@ void proc_tty_unregister_driver(struct t
-  */
- void __init proc_tty_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (!proc_mkdir("tty", NULL))
- 		return;
- 	proc_mkdir("tty/ldisc", NULL);	/* Preserved: it's userspace visible */
---- a/include/net/snmp.h
-+++ b/include/net/snmp.h
-@@ -124,6 +124,21 @@ struct linux_tls_mib {
- #define DECLARE_SNMP_STAT(type, name)	\
- 	extern __typeof__(type) __percpu *name
- 
-+#ifdef CONFIG_PROC_STRIPPED
-+#define __SNMP_STATS_DUMMY(mib)	\
-+	do { (void) mib->mibs[0]; } while(0)
-+
-+#define __SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_DEC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+
-+#else
-+
- #define __SNMP_INC_STATS(mib, field)	\
- 			__this_cpu_inc(mib->mibs[field])
- 
-@@ -154,8 +169,9 @@ struct linux_tls_mib {
- 		__this_cpu_add(ptr[basefield##OCTETS], addend);	\
- 	} while (0)
- 
-+#endif
- 
--#if BITS_PER_LONG==32
-+#if (BITS_PER_LONG==32) && !defined(CONFIG_PROC_STRIPPED)
- 
- #define __SNMP_ADD_STATS64(mib, field, addend) 				\
- 	do {								\
---- a/ipc/msg.c
-+++ b/ipc/msg.c
-@@ -1370,6 +1370,9 @@ void __init msg_init(void)
- {
- 	msg_init_ns(&init_ipc_ns);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	ipc_init_proc_interface("sysvipc/msg",
- 				"       key      msqid perms      cbytes       qnum lspid lrpid   uid   gid  cuid  cgid      stime      rtime      ctime\n",
- 				IPC_MSG_IDS, sysvipc_msg_proc_show);
---- a/ipc/sem.c
-+++ b/ipc/sem.c
-@@ -268,6 +268,8 @@ void sem_exit_ns(struct ipc_namespace *n
- void __init sem_init(void)
- {
- 	sem_init_ns(&init_ipc_ns);
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/sem",
- 				"       key      semid perms      nsems   uid   gid  cuid  cgid      otime      ctime\n",
- 				IPC_SEM_IDS, sysvipc_sem_proc_show);
---- a/ipc/shm.c
-+++ b/ipc/shm.c
-@@ -154,6 +154,8 @@ pure_initcall(ipc_ns_init);
- 
- void __init shm_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
- 	ipc_init_proc_interface("sysvipc/shm",
- #if BITS_PER_LONG <= 32
- 				"       key      shmid perms       size  cpid  lpid nattch   uid   gid  cuid  cgid      atime      dtime      ctime        rss       swap\n",
---- a/ipc/util.c
-+++ b/ipc/util.c
-@@ -141,6 +141,9 @@ void __init ipc_init_proc_interface(cons
- 	struct proc_dir_entry *pde;
- 	struct ipc_proc_iface *iface;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	iface = kmalloc(sizeof(*iface), GFP_KERNEL);
- 	if (!iface)
- 		return;
---- a/kernel/exec_domain.c
-+++ b/kernel/exec_domain.c
-@@ -29,6 +29,8 @@ static int execdomains_proc_show(struct
- 
- static int __init proc_execdomains_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	proc_create_single("execdomains", 0, NULL, execdomains_proc_show);
- 	return 0;
- }
---- a/kernel/irq/proc.c
-+++ b/kernel/irq/proc.c
-@@ -341,6 +341,9 @@ void register_irq_proc(unsigned int irq,
- 	void __maybe_unused *irqp = (void *)(unsigned long) irq;
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
- 		return;
- 
-@@ -394,6 +397,9 @@ void unregister_irq_proc(unsigned int ir
- {
- 	char name [MAX_NAMELEN];
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	if (!root_irq_dir || !desc->dir)
- 		return;
- #ifdef CONFIG_SMP
-@@ -432,6 +438,9 @@ void init_irq_proc(void)
- 	unsigned int irq;
- 	struct irq_desc *desc;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+		return;
-+
- 	/* create /proc/irq */
- 	root_irq_dir = proc_mkdir("irq", NULL);
- 	if (!root_irq_dir)
---- a/kernel/time/timer_list.c
-+++ b/kernel/time/timer_list.c
-@@ -350,6 +350,8 @@ static int __init init_timer_list_procfs
- {
- 	struct proc_dir_entry *pe;
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	pe = proc_create_seq_private("timer_list", 0400, NULL, &timer_list_sops,
- 			sizeof(struct timer_list_iter), NULL);
- 	if (!pe)
---- a/mm/vmalloc.c
-+++ b/mm/vmalloc.c
-@@ -4215,6 +4215,8 @@ static const struct seq_operations vmall
- 
- static int __init proc_vmalloc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	if (IS_ENABLED(CONFIG_NUMA))
- 		proc_create_seq_private("vmallocinfo", 0400, NULL,
- 				&vmalloc_op,
---- a/mm/vmstat.c
-+++ b/mm/vmstat.c
-@@ -2109,10 +2109,12 @@ void __init init_mm_internals(void)
- 	start_shepherd_timer();
- #endif
- #ifdef CONFIG_PROC_FS
--	proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
--	proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
-+		proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
-+		proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
-+	}
- 	proc_create_seq("vmstat", 0444, NULL, &vmstat_op);
--	proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
- #endif
- }
- 
---- a/net/8021q/vlanproc.c
-+++ b/net/8021q/vlanproc.c
-@@ -93,6 +93,9 @@ void vlan_proc_cleanup(struct net *net)
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return;
-+
- 	if (vn->proc_vlan_conf)
- 		remove_proc_entry(name_conf, vn->proc_vlan_dir);
- 
-@@ -112,6 +115,9 @@ int __net_init vlan_proc_init(struct net
- {
- 	struct vlan_net *vn = net_generic(net, vlan_net_id);
- 
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net);
- 	if (!vn->proc_vlan_dir)
- 		goto err;
---- a/net/core/net-procfs.c
-+++ b/net/core/net-procfs.c
-@@ -319,10 +319,12 @@ static int __net_init dev_proc_net_init(
- 	if (!proc_create_net("dev", 0444, net->proc_net, &dev_seq_ops,
- 			sizeof(struct seq_net_private)))
- 		goto out;
--	if (!proc_create_seq("softnet_stat", 0444, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_seq("softnet_stat", 0444, net->proc_net,
- 			 &softnet_seq_ops))
- 		goto out_dev;
--	if (!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
- 			sizeof(struct seq_net_private)))
- 		goto out_softnet;
- 
-@@ -332,9 +334,11 @@ static int __net_init dev_proc_net_init(
- out:
- 	return rc;
- out_ptype:
--	remove_proc_entry("ptype", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("ptype", net->proc_net);
- out_softnet:
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("softnet_stat", net->proc_net);
- out_dev:
- 	remove_proc_entry("dev", net->proc_net);
- 	goto out;
-@@ -344,8 +348,10 @@ static void __net_exit dev_proc_net_exit
- {
- 	wext_proc_exit(net);
- 
--	remove_proc_entry("ptype", net->proc_net);
--	remove_proc_entry("softnet_stat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("ptype", net->proc_net);
-+		remove_proc_entry("softnet_stat", net->proc_net);
-+	}
- 	remove_proc_entry("dev", net->proc_net);
- }
- 
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -4118,6 +4118,8 @@ static __net_initdata struct pernet_oper
- 
- static int __init proto_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
- 	return register_pernet_subsys(&proto_net_ops);
- }
- 
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -3037,11 +3037,13 @@ static const struct seq_operations fib_r
- 
- int __net_init fib_proc_init(struct net *net)
- {
--	if (!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
- 			sizeof(struct fib_trie_iter)))
- 		goto out1;
- 
--	if (!proc_create_net_single("fib_triestat", 0444, net->proc_net,
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+			!proc_create_net_single("fib_triestat", 0444, net->proc_net,
- 			fib_triestat_seq_show, NULL))
- 		goto out2;
- 
-@@ -3052,17 +3054,21 @@ int __net_init fib_proc_init(struct net
- 	return 0;
- 
- out3:
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_triestat", net->proc_net);
- out2:
--	remove_proc_entry("fib_trie", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		remove_proc_entry("fib_trie", net->proc_net);
- out1:
- 	return -ENOMEM;
- }
- 
- void __net_exit fib_proc_exit(struct net *net)
- {
--	remove_proc_entry("fib_trie", net->proc_net);
--	remove_proc_entry("fib_triestat", net->proc_net);
-+	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+		remove_proc_entry("fib_trie", net->proc_net);
-+		remove_proc_entry("fib_triestat", net->proc_net);
-+	}
- 	remove_proc_entry("route", net->proc_net);
- }
- 
---- a/net/ipv4/proc.c
-+++ b/net/ipv4/proc.c
-@@ -553,5 +553,8 @@ static __net_initdata struct pernet_oper
- 
- int __init ip_misc_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_proc_ops);
- }
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -381,6 +381,9 @@ static struct pernet_operations ip_rt_pr
- 
- static int __init ip_rt_proc_init(void)
- {
-+	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+		return 0;
-+
- 	return register_pernet_subsys(&ip_rt_proc_ops);
- }
- 
---- a/net/ipv4/inet_timewait_sock.c
-+++ b/net/ipv4/inet_timewait_sock.c
-@@ -269,7 +269,7 @@ void __inet_twsk_schedule(struct inet_ti
- 	 */
- 
- 	if (!rearm) {
--		bool kill = timeo <= 4*HZ;
-+		bool __maybe_unused  kill = timeo <= 4*HZ;
- 
- 		__NET_INC_STATS(twsk_net(tw), kill ? LINUX_MIB_TIMEWAITKILLED :
- 						     LINUX_MIB_TIMEWAITED);
diff --git a/target/linux/generic/hack-6.1/904-debloat_dma_buf.patch b/target/linux/generic/hack-6.1/904-debloat_dma_buf.patch
deleted file mode 100644
index 8b6bd6a7862a..000000000000
--- a/target/linux/generic/hack-6.1/904-debloat_dma_buf.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From e3692cb2fcd5ba1244512a0f43b8118f65f1c375 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:43 +0200
-Subject: debloat: dmabuf
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/Kconfig      |  2 +-
- drivers/dma-buf/Makefile  | 10 +++++++---
- drivers/dma-buf/dma-buf.c |  4 +++-
- kernel/sched/core.c       |  1 +
- 4 files changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/base/Kconfig
-+++ b/drivers/base/Kconfig
-@@ -198,7 +198,7 @@ config SOC_BUS
- source "drivers/base/regmap/Kconfig"
- 
- config DMA_SHARED_BUFFER
--	bool
-+	tristate
- 	default n
- 	select IRQ_WORK
- 	help
---- a/drivers/dma-buf/heaps/Makefile
-+++ b/drivers/dma-buf/heaps/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--obj-$(CONFIG_DMABUF_HEAPS_SYSTEM)	+= system_heap.o
--obj-$(CONFIG_DMABUF_HEAPS_CMA)		+= cma_heap.o
-+dma-buf-objs-$(CONFIG_DMABUF_HEAPS_SYSTEM)	+= system_heap.o
-+dma-buf-objs-$(CONFIG_DMABUF_HEAPS_CMA)		+= cma_heap.o
---- a/drivers/dma-buf/Makefile
-+++ b/drivers/dma-buf/Makefile
-@@ -1,12 +1,14 @@
- # SPDX-License-Identifier: GPL-2.0-only
--obj-y := dma-buf.o dma-fence.o dma-fence-array.o dma-fence-chain.o \
-+obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o
-+
-+dma-buf-objs-y := dma-buf.o dma-fence.o dma-fence-array.o dma-fence-chain.o \
- 	 dma-fence-unwrap.o dma-resv.o
--obj-$(CONFIG_DMABUF_HEAPS)	+= dma-heap.o
--obj-$(CONFIG_DMABUF_HEAPS)	+= heaps/
--obj-$(CONFIG_SYNC_FILE)		+= sync_file.o
--obj-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
--obj-$(CONFIG_UDMABUF)		+= udmabuf.o
--obj-$(CONFIG_DMABUF_SYSFS_STATS) += dma-buf-sysfs-stats.o
-+dma-buf-objs-$(CONFIG_DMABUF_HEAPS)	+= dma-heap.o
-+obj-$(CONFIG_DMABUF_HEAPS)		+= heaps/
-+dma-buf-objs-$(CONFIG_SYNC_FILE)	+= sync_file.o
-+dma-buf-objs-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
-+dma-buf-objs-$(CONFIG_UDMABUF)		+= udmabuf.o
-+dma-buf-objs-$(CONFIG_DMABUF_SYSFS_STATS) += dma-buf-sysfs-stats.o
- 
- dmabuf_selftests-y := \
- 	selftest.o \
-@@ -15,4 +17,6 @@ dmabuf_selftests-y := \
- 	st-dma-fence-unwrap.o \
- 	st-dma-resv.o
- 
--obj-$(CONFIG_DMABUF_SELFTESTS)	+= dmabuf_selftests.o
-+dma-buf-objs-$(CONFIG_DMABUF_SELFTESTS)	+= dmabuf_selftests.o
-+
-+dma-shared-buffer-objs :=  $(dma-buf-objs-y)
---- a/drivers/dma-buf/dma-buf.c
-+++ b/drivers/dma-buf/dma-buf.c
-@@ -1636,4 +1636,5 @@ static void __exit dma_buf_deinit(void)
- 	kern_unmount(dma_buf_mnt);
- 	dma_buf_uninit_sysfs_statistics();
- }
--__exitcall(dma_buf_deinit);
-+module_exit(dma_buf_deinit);
-+MODULE_LICENSE("GPL");
---- a/kernel/sched/core.c
-+++ b/kernel/sched/core.c
-@@ -4363,6 +4363,7 @@ int wake_up_state(struct task_struct *p,
- {
- 	return try_to_wake_up(p, state, 0);
- }
-+EXPORT_SYMBOL_GPL(wake_up_state);
- 
- /*
-  * Perform scheduler related setup for a newly forked process p.
---- a/fs/d_path.c
-+++ b/fs/d_path.c
-@@ -313,6 +313,7 @@ char *dynamic_dname(char *buffer, int bu
- 	buffer += buflen - sz;
- 	return memcpy(buffer, temp, sz);
- }
-+EXPORT_SYMBOL_GPL(dynamic_dname);
- 
- char *simple_dname(struct dentry *dentry, char *buffer, int buflen)
- {
diff --git a/target/linux/generic/hack-6.1/910-kobject_uevent.patch b/target/linux/generic/hack-6.1/910-kobject_uevent.patch
deleted file mode 100644
index c4c41ca400ae..000000000000
--- a/target/linux/generic/hack-6.1/910-kobject_uevent.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -179,6 +179,18 @@ out:
- 	return r;
- }
- 
-+u64 uevent_next_seqnum(void)
-+{
-+	u64 seq;
-+
-+	mutex_lock(&uevent_sock_mutex);
-+	seq = ++uevent_seqnum;
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	return seq;
-+}
-+EXPORT_SYMBOL_GPL(uevent_next_seqnum);
-+
- /**
-  * kobject_synth_uevent - send synthetic uevent with arguments
-  *
diff --git a/target/linux/generic/hack-6.1/911-kobject_add_broadcast_uevent.patch b/target/linux/generic/hack-6.1/911-kobject_add_broadcast_uevent.patch
deleted file mode 100644
index 99e95ce3523e..000000000000
--- a/target/linux/generic/hack-6.1/911-kobject_add_broadcast_uevent.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add broadcast_uevent()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h |  5 +++++
- lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/include/linux/kobject.h
-+++ b/include/linux/kobject.h
-@@ -32,6 +32,8 @@
- #define UEVENT_NUM_ENVP			64	/* number of env pointers */
- #define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
- 
-+struct sk_buff;
-+
- #ifdef CONFIG_UEVENT_HELPER
- /* path to the userspace helper executed on an event */
- extern char uevent_helper[];
-@@ -224,4 +226,7 @@ int kobject_synth_uevent(struct kobject
- __printf(2, 3)
- int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...);
- 
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation);
-+
- #endif /* _KOBJECT_H_ */
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -706,6 +706,43 @@ int add_uevent_var(struct kobj_uevent_en
- EXPORT_SYMBOL_GPL(add_uevent_var);
- 
- #if defined(CONFIG_NET)
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	struct uevent_sock *ue_sk;
-+	int err = 0;
-+
-+	/* send netlink message */
-+	mutex_lock(&uevent_sock_mutex);
-+	list_for_each_entry(ue_sk, &uevent_sock_list, list) {
-+		struct sock *uevent_sock = ue_sk->sk;
-+		struct sk_buff *skb2;
-+
-+		skb2 = skb_clone(skb, allocation);
-+		if (!skb2)
-+			break;
-+
-+		err = netlink_broadcast(uevent_sock, skb2, pid, group,
-+					allocation);
-+		if (err)
-+			break;
-+	}
-+	mutex_unlock(&uevent_sock_mutex);
-+
-+	kfree_skb(skb);
-+	return err;
-+}
-+#else
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+		     gfp_t allocation)
-+{
-+	kfree_skb(skb);
-+	return 0;
-+}
-+#endif
-+EXPORT_SYMBOL_GPL(broadcast_uevent);
-+
-+#if defined(CONFIG_NET)
- static int uevent_net_broadcast(struct sock *usk, struct sk_buff *skb,
- 				struct netlink_ext_ack *extack)
- {
diff --git a/target/linux/generic/hack-6.1/920-device_tree_cmdline.patch b/target/linux/generic/hack-6.1/920-device_tree_cmdline.patch
deleted file mode 100644
index cc384bb553ba..000000000000
--- a/target/linux/generic/hack-6.1/920-device_tree_cmdline.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From e08bcbbaa52fcc41f02743fd2e62a33255ce52da Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 13:52:28 +0200
-Subject: [PATCH] of/ftd: add device tree cmdline
-
----
- drivers/of/fdt.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1183,6 +1183,9 @@ int __init early_init_dt_scan_chosen(cha
- 	p = of_get_flat_dt_prop(node, "bootargs", &l);
- 	if (p != NULL && l > 0)
- 		strscpy(cmdline, p, min(l, COMMAND_LINE_SIZE));
-+	p = of_get_flat_dt_prop(node, "bootargs-append", &l);
-+	if (p != NULL && l > 0)
-+		strlcat(cmdline, p, min_t(int, strlen(cmdline) + (int)l, COMMAND_LINE_SIZE));
- 
- handle_cmdline:
- 	/*
diff --git a/target/linux/generic/hack-6.1/930-Revert-Revert-Revert-driver-core-Set-fw_devlink-on-b.patch b/target/linux/generic/hack-6.1/930-Revert-Revert-Revert-driver-core-Set-fw_devlink-on-b.patch
deleted file mode 100644
index 3476aa6edb09..000000000000
--- a/target/linux/generic/hack-6.1/930-Revert-Revert-Revert-driver-core-Set-fw_devlink-on-b.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 19 Jul 2022 06:17:48 +0200
-Subject: [PATCH] Revert "Revert "Revert "driver core: Set fw_devlink=on by
- default"""
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit ea718c699055c8566eb64432388a04974c43b2ea.
-
-With of_platform_populate() called for MTD partitions that commit breaks
-probing devices which reference MTD in device tree.
-
-Link: https://lore.kernel.org/all/696cb2da-20b9-b3dd-46d9-de4bf91a1506@gmail.com/T/#u
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/base/core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/base/core.c
-+++ b/drivers/base/core.c
-@@ -1718,7 +1718,7 @@ static void device_links_purge(struct de
- #define FW_DEVLINK_FLAGS_RPM		(FW_DEVLINK_FLAGS_ON | \
- 					 DL_FLAG_PM_RUNTIME)
- 
--static u32 fw_devlink_flags = FW_DEVLINK_FLAGS_ON;
-+static u32 fw_devlink_flags = FW_DEVLINK_FLAGS_PERMISSIVE;
- static int __init fw_devlink_setup(char *arg)
- {
- 	if (!arg)
diff --git a/target/linux/generic/pending-6.1/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch b/target/linux/generic/pending-6.1/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch
deleted file mode 100644
index 7b342e696233..000000000000
--- a/target/linux/generic/pending-6.1/100-compiler.h-only-include-asm-rwonce.h-for-kernel-code.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Oct 2020 22:00:03 +0200
-Subject: [PATCH] compiler.h: only include asm/rwonce.h for kernel code
-
-This header file is not in uapi, which makes any user space code that includes
-linux/compiler.h to fail with the error 'asm/rwonce.h: No such file or directory'
-
-Fixes: e506ea451254 ("compiler.h: Split {READ,WRITE}_ONCE definitions out into rwonce.h")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/compiler.h
-+++ b/include/linux/compiler.h
-@@ -203,6 +203,8 @@ void ftrace_likely_update(struct ftrace_
- 	__v;								\
- })
- 
-+#include <asm/rwonce.h>
-+
- #endif /* __KERNEL__ */
- 
- /*
-@@ -243,6 +245,4 @@ static inline void *offset_to_ptr(const
-  */
- #define prevent_tail_call_optimization()	mb()
- 
--#include <asm/rwonce.h>
--
- #endif /* __LINUX_COMPILER_H */
diff --git a/target/linux/generic/pending-6.1/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch b/target/linux/generic/pending-6.1/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
deleted file mode 100644
index d79d03defb3a..000000000000
--- a/target/linux/generic/pending-6.1/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 18 Apr 2018 10:50:05 +0200
-Subject: [PATCH] MIPS: only process negative stack offsets on stack traces
-
-Fixes endless back traces in cases where the compiler emits a stack
-pointer increase in a branch delay slot (probably for some form of
-function return).
-
-[    3.475442] BUG: MAX_STACK_TRACE_ENTRIES too low!
-[    3.480070] turning off the locking correctness validator.
-[    3.485521] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.34 #0
-[    3.491475] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000034 00000000 00000000
-[    3.499764]         87c3838c 80696377 8061047c 00000000 00000001 00000001 87c2d850 6534689f
-[    3.508059]         00000000 00000000 80e10000 00000000 00000000 000000cf 0000000f 00000000
-[    3.516353]         00000000 806a0000 00076891 00000000 00000000 00000000 ffffffff 00000000
-[    3.524648]         806c0000 00000004 80e10000 806a0000 00000003 80690000 00000000 80700000
-[    3.532942]         ...
-[    3.535362] Call Trace:
-[    3.537818] [<80010a48>] show_stack+0x58/0x100
-[    3.542207] [<804c2f78>] dump_stack+0xe8/0x170
-[    3.546613] [<80079f90>] save_trace+0xf0/0x110
-[    3.551010] [<8007b1ec>] mark_lock+0x33c/0x78c
-[    3.555413] [<8007bf48>] __lock_acquire+0x2ac/0x1a08
-[    3.560337] [<8007de60>] lock_acquire+0x64/0x8c
-[    3.564846] [<804e1570>] _raw_spin_lock_irqsave+0x54/0x78
-[    3.570186] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.574770] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.579257] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.583839] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.588329] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.592911] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.597401] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.601983] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.606473] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.611055] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.615545] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.620125] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.624619] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.629197] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.633691] [<801b618c>] kernfs_notify+0x94/0xac
-[    3.638269] [<801b7b10>] sysfs_notify+0x74/0xa0
-[    3.642763] [<801b618c>] kernfs_notify+0x94/0xac
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/kernel/process.c
-+++ b/arch/mips/kernel/process.c
-@@ -395,6 +395,8 @@ static inline int is_sp_move_ins(union m
- 
- 	if (ip->i_format.opcode == addiu_op ||
- 	    ip->i_format.opcode == daddiu_op) {
-+		if (ip->i_format.simmediate > 0)
-+			return 0;
- 		*frame_size = -ip->i_format.simmediate;
- 		return 1;
- 	}
diff --git a/target/linux/generic/pending-6.1/103-kbuild-export-SUBARCH.patch b/target/linux/generic/pending-6.1/103-kbuild-export-SUBARCH.patch
deleted file mode 100644
index c8c0efaecfa1..000000000000
--- a/target/linux/generic/pending-6.1/103-kbuild-export-SUBARCH.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 173019b66dcc9d68ad9333aa744dad1e369b5aa8 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 9 Jul 2017 00:26:53 +0200
-Subject: [PATCH 34/34] kernel: add compile fix for linux 4.9 on x86
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -605,7 +605,7 @@ endif
- # Allows the usage of unstable features in stable compilers.
- export RUSTC_BOOTSTRAP := 1
- 
--export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
-+export ARCH SRCARCH SUBARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC HOSTPKG_CONFIG
- export RUSTC RUSTDOC RUSTFMT RUSTC_OR_CLIPPY_QUIET RUSTC_OR_CLIPPY BINDGEN CARGO
- export HOSTRUSTC KBUILD_HOSTRUSTFLAGS
- export CPP AR NM STRIP OBJCOPY OBJDUMP READELF PAHOLE RESOLVE_BTFIDS LEX YACC AWK INSTALLKERNEL
diff --git a/target/linux/generic/pending-6.1/111-watchdog-max63xx_wdt-Add-support-for-specifying-WDI-.patch b/target/linux/generic/pending-6.1/111-watchdog-max63xx_wdt-Add-support-for-specifying-WDI-.patch
deleted file mode 100644
index d6b10491f830..000000000000
--- a/target/linux/generic/pending-6.1/111-watchdog-max63xx_wdt-Add-support-for-specifying-WDI-.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From bd1b9f66d5134e518419f4c4dacf1884c1616983 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
-Date: Thu, 28 Apr 2022 11:13:23 +0200
-Subject: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic
- via GPIO
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-On some boards is WDI logic of max6370 chip connected via GPIO.
-So extend max63xx_wdt driver to allow specifying WDI logic via GPIO.
-
-Signed-off-by: Pali Rohár <pali@kernel.org>
----
- drivers/watchdog/max63xx_wdt.c | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
-
---- a/drivers/watchdog/max63xx_wdt.c
-+++ b/drivers/watchdog/max63xx_wdt.c
-@@ -27,6 +27,7 @@
- #include <linux/io.h>
- #include <linux/slab.h>
- #include <linux/property.h>
-+#include <linux/gpio/consumer.h>
- 
- #define DEFAULT_HEARTBEAT 60
- #define MAX_HEARTBEAT     60
-@@ -53,6 +54,9 @@ struct max63xx_wdt {
- 	void __iomem *base;
- 	spinlock_t lock;
- 
-+	/* GPIOs */
-+	struct gpio_desc *gpio_wdi;
-+
- 	/* WDI and WSET bits write access routines */
- 	void (*ping)(struct max63xx_wdt *wdt);
- 	void (*set)(struct max63xx_wdt *wdt, u8 set);
-@@ -158,6 +162,17 @@ static const struct watchdog_info max63x
- 	.identity = "max63xx Watchdog",
- };
- 
-+static void max63xx_gpio_ping(struct max63xx_wdt *wdt)
-+{
-+	spin_lock(&wdt->lock);
-+
-+	gpiod_set_value(wdt->gpio_wdi, 1);
-+	udelay(1);
-+	gpiod_set_value(wdt->gpio_wdi, 0);
-+
-+	spin_unlock(&wdt->lock);
-+}
-+
- static void max63xx_mmap_ping(struct max63xx_wdt *wdt)
- {
- 	u8 val;
-@@ -225,10 +240,19 @@ static int max63xx_wdt_probe(struct plat
- 		return -EINVAL;
- 	}
- 
-+	wdt->gpio_wdi = devm_gpiod_get(dev, NULL, GPIOD_FLAGS_BIT_DIR_OUT);
-+	if (IS_ERR(wdt->gpio_wdi) && PTR_ERR(wdt->gpio_wdi) != -ENOENT)
-+		return dev_err_probe(dev, PTR_ERR(wdt->gpio_wdi),
-+				     "unable to request gpio: %ld\n",
-+				     PTR_ERR(wdt->gpio_wdi));
-+
- 	err = max63xx_mmap_init(pdev, wdt);
- 	if (err)
- 		return err;
- 
-+	if (!IS_ERR(wdt->gpio_wdi))
-+		wdt->ping = max63xx_gpio_ping;
-+
- 	platform_set_drvdata(pdev, &wdt->wdd);
- 	watchdog_set_drvdata(&wdt->wdd, wdt);
- 
diff --git a/target/linux/generic/pending-6.1/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-6.1/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
deleted file mode 100644
index 8fea984a3304..000000000000
--- a/target/linux/generic/pending-6.1/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Subject: mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET calculation
-
-An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any
-kernel beyond version 4.3 resulting in:
-
-BUG: Bad page state in process swapper  pfn:086ac
-
-bisect resulted in:
-
-a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit
-commit a1c34a3bf00af2cede839879502e12dc68491ad5
-Author: Laura Abbott <laura@labbott.name>
-Date:   Thu Nov 5 18:48:46 2015 -0800
-
-    mm: Don't offset memmap for flatmem
-
-    Srinivas Kandagatla reported bad page messages when trying to remove the
-    bottom 2MB on an ARM based IFC6410 board
-
-      BUG: Bad page state in process swapper  pfn:fffa8
-      page:ef7fb500 count:0 mapcount:0 mapping:  (null) index:0x0
-      flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked)
-      page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
-      bad because of flags:
-      flags: 0x200041(locked|active|mlocked)
-      Modules linked in:
-      CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty
-#816
-      Hardware name: Qualcomm (Flattened Device Tree)
-        unwind_backtrace
-        show_stack
-        dump_stack
-        bad_page
-        free_pages_prepare
-        free_hot_cold_page
-        __free_pages
-        free_highmem_page
-        mem_init
-        start_kernel
-      Disabling lock debugging due to kernel taint
-    [...]
-:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4
-0a8156f848733dfa21e16c196dfb6c0a76290709 M      mm
-
-This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by
-page_to_pfn anymore.
-
-The following output was generated with two hacked in printk statements:
-
-printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map -
-(pgdat->node_start_pfn - ARCH_PFN_OFFSET));
-		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
-			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
-printk("after %p\n", mem_map);
-
-Output:
-
-[    0.000000] before 8861b280 vs. 8861b280 or 8851b280
-[    0.000000] after 8851b280
-
-As seen in the first line mem_map with subtraction of offset does not equal the
-mem_map after subtraction of ARCH_PFN_OFFSET.
-
-After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the
-previously calculated offset is zero for the named platform it is able to boot
-4.4 and 4.9-rc7 again.
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -7910,7 +7910,7 @@ static void __init alloc_node_mem_map(st
- 	if (pgdat == NODE_DATA(0)) {
- 		mem_map = NODE_DATA(0)->node_mem_map;
- 		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
--			mem_map -= offset;
-+			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
- 	}
- #endif
- }
diff --git a/target/linux/generic/pending-6.1/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch b/target/linux/generic/pending-6.1/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
deleted file mode 100644
index 8f40ae3ba240..000000000000
--- a/target/linux/generic/pending-6.1/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: use .rename2 and add RENAME_WHITEOUT support
-
-It is required for renames on overlayfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -614,8 +614,8 @@ static int jffs2_rmdir (struct inode *di
- 	return ret;
- }
- 
--static int jffs2_mknod (struct user_namespace *mnt_userns, struct inode *dir_i,
--		        struct dentry *dentry, umode_t mode, dev_t rdev)
-+static int __jffs2_mknod (struct user_namespace *mnt_userns, struct inode *dir_i,
-+			  struct dentry *dentry, umode_t mode, dev_t rdev, bool whiteout)
- {
- 	struct jffs2_inode_info *f, *dir_f;
- 	struct jffs2_sb_info *c;
-@@ -754,7 +754,11 @@ static int jffs2_mknod (struct user_name
- 	mutex_unlock(&dir_f->sem);
- 	jffs2_complete_reservation(c);
- 
--	d_instantiate_new(dentry, inode);
-+	if (!whiteout)
-+		d_instantiate_new(dentry, inode);
-+	else
-+		unlock_new_inode(inode);
-+
- 	return 0;
- 
-  fail:
-@@ -762,6 +766,19 @@ static int jffs2_mknod (struct user_name
- 	return ret;
- }
- 
-+static int jffs2_mknod (struct user_namespace *mnt_userns, struct inode *dir_i,
-+			  struct dentry *dentry, umode_t mode, dev_t rdev)
-+{
-+	return __jffs2_mknod(mnt_userns, dir_i, dentry, mode, rdev, false);
-+}
-+
-+static int jffs2_whiteout (struct user_namespace *mnt_userns, struct inode *old_dir,
-+			    struct dentry *old_dentry)
-+{
-+	return __jffs2_mknod(mnt_userns, old_dir, old_dentry, S_IFCHR | WHITEOUT_MODE,
-+			     WHITEOUT_DEV, true);
-+}
-+
- static int jffs2_rename (struct user_namespace *mnt_userns,
- 			 struct inode *old_dir_i, struct dentry *old_dentry,
- 			 struct inode *new_dir_i, struct dentry *new_dentry,
-@@ -773,7 +790,7 @@ static int jffs2_rename (struct user_nam
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~RENAME_NOREPLACE)
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
- 		return -EINVAL;
- 
- 	/* The VFS will check for us and prevent trying to rename a
-@@ -839,9 +856,14 @@ static int jffs2_rename (struct user_nam
- 	if (d_is_dir(old_dentry) && !victim_f)
- 		inc_nlink(new_dir_i);
- 
--	/* Unlink the original */
--	ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
--			      old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
-+	if (flags & RENAME_WHITEOUT)
-+		/* Replace with whiteout */
-+		ret = jffs2_whiteout(mnt_userns, old_dir_i, old_dentry);
-+	else
-+		/* Unlink the original */
-+		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-+				      old_dentry->d_name.name,
-+				      old_dentry->d_name.len, NULL, now);
- 
- 	/* We don't touch inode->i_nlink */
- 
diff --git a/target/linux/generic/pending-6.1/141-jffs2-add-RENAME_EXCHANGE-support.patch b/target/linux/generic/pending-6.1/141-jffs2-add-RENAME_EXCHANGE-support.patch
deleted file mode 100644
index f58fc791d281..000000000000
--- a/target/linux/generic/pending-6.1/141-jffs2-add-RENAME_EXCHANGE-support.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: add RENAME_EXCHANGE support
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -787,18 +787,31 @@ static int jffs2_rename (struct user_nam
- 	int ret;
- 	struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
- 	struct jffs2_inode_info *victim_f = NULL;
-+	struct inode *fst_inode = d_inode(old_dentry);
-+	struct inode *snd_inode = d_inode(new_dentry);
- 	uint8_t type;
- 	uint32_t now;
- 
--	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
-+	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT|RENAME_EXCHANGE))
- 		return -EINVAL;
- 
-+	if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) {
-+		if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) {
-+			inc_nlink(new_dir_i);
-+			drop_nlink(old_dir_i);
-+		}
-+		else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) {
-+			drop_nlink(new_dir_i);
-+			inc_nlink(old_dir_i);
-+		}
-+	}
-+
- 	/* The VFS will check for us and prevent trying to rename a
- 	 * file over a directory and vice versa, but if it's a directory,
- 	 * the VFS can't check whether the victim is empty. The filesystem
- 	 * needs to do that for itself.
- 	 */
--	if (d_really_is_positive(new_dentry)) {
-+	if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) {
- 		victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
- 		if (d_is_dir(new_dentry)) {
- 			struct jffs2_full_dirent *fd;
-@@ -833,7 +846,7 @@ static int jffs2_rename (struct user_nam
- 	if (ret)
- 		return ret;
- 
--	if (victim_f) {
-+	if (victim_f && !(flags & RENAME_EXCHANGE)) {
- 		/* There was a victim. Kill it off nicely */
- 		if (d_is_dir(new_dentry))
- 			clear_nlink(d_inode(new_dentry));
-@@ -859,6 +872,12 @@ static int jffs2_rename (struct user_nam
- 	if (flags & RENAME_WHITEOUT)
- 		/* Replace with whiteout */
- 		ret = jffs2_whiteout(mnt_userns, old_dir_i, old_dentry);
-+	else if (flags & RENAME_EXCHANGE)
-+		/* Replace the original */
-+		ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
-+				    d_inode(new_dentry)->i_ino, type,
-+				    old_dentry->d_name.name, old_dentry->d_name.len,
-+				    now);
- 	else
- 		/* Unlink the original */
- 		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-@@ -890,7 +909,7 @@ static int jffs2_rename (struct user_nam
- 		return ret;
- 	}
- 
--	if (d_is_dir(old_dentry))
-+	if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE))
- 		drop_nlink(old_dir_i);
- 
- 	new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);
diff --git a/target/linux/generic/pending-6.1/142-jffs2-add-splice-ops.patch b/target/linux/generic/pending-6.1/142-jffs2-add-splice-ops.patch
deleted file mode 100644
index de847a1f5cd1..000000000000
--- a/target/linux/generic/pending-6.1/142-jffs2-add-splice-ops.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: add splice ops
-
-Add splice_read using generic_file_splice_read.
-Add splice_write using iter_file_splice_write
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/file.c
-+++ b/fs/jffs2/file.c
-@@ -53,6 +53,8 @@ const struct file_operations jffs2_file_
- 	.open =		generic_file_open,
-  	.read_iter =	generic_file_read_iter,
-  	.write_iter =	generic_file_write_iter,
-+	.splice_read =	generic_file_splice_read,
-+	.splice_write =	iter_file_splice_write,
- 	.unlocked_ioctl=jffs2_ioctl,
- 	.mmap =		generic_file_readonly_mmap,
- 	.fsync =	jffs2_fsync,
diff --git a/target/linux/generic/pending-6.1/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-6.1/150-bridge_allow_receiption_on_disabled_port.patch
deleted file mode 100644
index ac4a3138a550..000000000000
--- a/target/linux/generic/pending-6.1/150-bridge_allow_receiption_on_disabled_port.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From: Stephen Hemminger <stephen@networkplumber.org>
-Subject: bridge: allow receiption on disabled port
-
-When an ethernet device is enslaved to a bridge, and the bridge STP
-detects loss of carrier (or operational state down), then normally
-packet receiption is blocked.
-
-This breaks control applications like WPA which maybe expecting to
-receive packets to negotiate to bring link up. The bridge needs to
-block forwarding packets from these disabled ports, but there is no
-hard requirement to not allow local packet delivery.
-
-Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -227,6 +227,9 @@ static void __br_handle_local_finish(str
- /* note: already called with rcu_read_lock */
- static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
- {
-+	struct net_bridge_port *p = br_port_get_rcu(skb->dev);
-+
-+	if (p->state != BR_STATE_DISABLED)
- 	__br_handle_local_finish(skb);
- 
- 	/* return 1 to signal the okfn() was called so it's ok to use the skb */
-@@ -397,6 +400,17 @@ forward:
- 		goto defer_stp_filtering;
- 
- 	switch (p->state) {
-+	case BR_STATE_DISABLED:
-+		if (ether_addr_equal(p->br->dev->dev_addr, dest))
-+			skb->pkt_type = PACKET_HOST;
-+
-+		if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
-+			dev_net(skb->dev), NULL, skb, skb->dev, NULL,
-+			br_handle_local_finish) == 1) {
-+			return RX_HANDLER_PASS;
-+		}
-+		break;
-+
- 	case BR_STATE_FORWARDING:
- 	case BR_STATE_LEARNING:
- defer_stp_filtering:
diff --git a/target/linux/generic/pending-6.1/151-net-bridge-do-not-send-arp-replies-if-src-and-target.patch b/target/linux/generic/pending-6.1/151-net-bridge-do-not-send-arp-replies-if-src-and-target.patch
deleted file mode 100644
index f420d210c27c..000000000000
--- a/target/linux/generic/pending-6.1/151-net-bridge-do-not-send-arp-replies-if-src-and-target.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 4 Jan 2024 15:21:21 +0100
-Subject: [PATCH] net: bridge: do not send arp replies if src and target hw
- addr is the same
-
-There are broken devices in the wild that handle duplicate IP address
-detection by sending out ARP requests for the IP that they received from a
-DHCP server and refuse the address if they get a reply.
-When proxyarp is enabled, they would go into a loop of requesting an address
-and then NAKing it again.
-
-Link: https://github.com/openwrt/openwrt/issues/14309
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/bridge/br_arp_nd_proxy.c
-+++ b/net/bridge/br_arp_nd_proxy.c
-@@ -204,7 +204,10 @@ void br_do_proxy_suppress_arp(struct sk_
- 			if ((p && (p->flags & BR_PROXYARP)) ||
- 			    (f->dst && (f->dst->flags & (BR_PROXYARP_WIFI |
- 							 BR_NEIGH_SUPPRESS)))) {
--				if (!vid)
-+				replied = true;
-+				if (!memcmp(n->ha, sha, dev->addr_len))
-+					replied = false;
-+				else if (!vid)
- 					br_arp_send(br, p, skb->dev, sip, tip,
- 						    sha, n->ha, sha, 0, 0);
- 				else
-@@ -212,7 +215,6 @@ void br_do_proxy_suppress_arp(struct sk_
- 						    sha, n->ha, sha,
- 						    skb->vlan_proto,
- 						    skb_vlan_tag_get(skb));
--				replied = true;
- 			}
- 
- 			/* If we have replied or as long as we know the
diff --git a/target/linux/generic/pending-6.1/190-rtc-rs5c372-support_alarms_up_to_1_week.patch b/target/linux/generic/pending-6.1/190-rtc-rs5c372-support_alarms_up_to_1_week.patch
deleted file mode 100644
index 2f5c2228c7a4..000000000000
--- a/target/linux/generic/pending-6.1/190-rtc-rs5c372-support_alarms_up_to_1_week.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From: Daniel González Cabanelas <dgcbueu@gmail.com>
-Subject: [PATCH 1/2] rtc: rs5c372: support alarms up to 1 week
-
-The Ricoh R2221x, R2223x, RS5C372, RV5C387A chips can handle 1 week
-alarms.
-
-Read the "wday" alarm register and convert it to a date to support up 1
-week in our driver.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
----
- drivers/rtc/rtc-rs5c372.c | 48 ++++++++++++++++++++++++++++++++++-----
- 1 file changed, 42 insertions(+), 6 deletions(-)
-
---- a/drivers/rtc/rtc-rs5c372.c
-+++ b/drivers/rtc/rtc-rs5c372.c
-@@ -399,7 +399,9 @@ static int rs5c_read_alarm(struct device
- {
- 	struct i2c_client	*client = to_i2c_client(dev);
- 	struct rs5c372		*rs5c = i2c_get_clientdata(client);
--	int			status;
-+	int			status, wday_offs;
-+	struct rtc_time 	rtc;
-+	unsigned long 		alarm_secs;
- 
- 	status = rs5c_get_regs(rs5c);
- 	if (status < 0)
-@@ -409,6 +411,30 @@ static int rs5c_read_alarm(struct device
- 	t->time.tm_sec = 0;
- 	t->time.tm_min = bcd2bin(rs5c->regs[RS5C_REG_ALARM_A_MIN] & 0x7f);
- 	t->time.tm_hour = rs5c_reg2hr(rs5c, rs5c->regs[RS5C_REG_ALARM_A_HOURS]);
-+	t->time.tm_wday = ffs(rs5c->regs[RS5C_REG_ALARM_A_WDAY] & 0x7f) - 1;
-+
-+	/* determine the day, month and year based on alarm wday, taking as a
-+	 * reference the current time from the rtc
-+	 */
-+	status = rs5c372_rtc_read_time(dev, &rtc);
-+	if (status < 0)
-+		return status;
-+
-+	wday_offs = t->time.tm_wday - rtc.tm_wday;
-+	alarm_secs = mktime64(rtc.tm_year + 1900,
-+			      rtc.tm_mon + 1,
-+			      rtc.tm_mday + wday_offs,
-+			      t->time.tm_hour,
-+			      t->time.tm_min,
-+			      t->time.tm_sec);
-+
-+	if (wday_offs < 0 || (wday_offs == 0 &&
-+			      (t->time.tm_hour < rtc.tm_hour ||
-+			       (t->time.tm_hour == rtc.tm_hour &&
-+				t->time.tm_min <= rtc.tm_min))))
-+		alarm_secs += 7 * 86400;
-+
-+	rtc_time64_to_tm(alarm_secs, &t->time);
- 
- 	/* ... and status */
- 	t->enabled = !!(rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE);
-@@ -423,12 +449,20 @@ static int rs5c_set_alarm(struct device
- 	struct rs5c372		*rs5c = i2c_get_clientdata(client);
- 	int			status, addr, i;
- 	unsigned char		buf[3];
-+	struct rtc_time 	rtc_tm;
-+	unsigned long 		rtc_secs, alarm_secs;
- 
--	/* only handle up to 24 hours in the future, like RTC_ALM_SET */
--	if (t->time.tm_mday != -1
--			|| t->time.tm_mon != -1
--			|| t->time.tm_year != -1)
-+	/* chip only can handle alarms up to one week in the future*/
-+	status = rs5c372_rtc_read_time(dev, &rtc_tm);
-+	if (status)
-+		return status;
-+	rtc_secs = rtc_tm_to_time64(&rtc_tm);
-+	alarm_secs = rtc_tm_to_time64(&t->time);
-+	if (alarm_secs >= rtc_secs + 7 * 86400) {
-+		dev_err(dev, "%s: alarm maximum is one week in the future (%d)\n",
-+			__func__, status);
- 		return -EINVAL;
-+	}
- 
- 	/* REVISIT: round up tm_sec */
- 
-@@ -449,7 +483,9 @@ static int rs5c_set_alarm(struct device
- 	/* set alarm */
- 	buf[0] = bin2bcd(t->time.tm_min);
- 	buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour);
--	buf[2] = 0x7f;	/* any/all days */
-+	/* each bit is the day of the week, 0x7f means all days */
-+	buf[2] = (t->time.tm_wday >= 0 && t->time.tm_wday < 7) ?
-+		  BIT(t->time.tm_wday) : 0x7f;
- 
- 	for (i = 0; i < sizeof(buf); i++) {
- 		addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i);
diff --git a/target/linux/generic/pending-6.1/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch b/target/linux/generic/pending-6.1/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch
deleted file mode 100644
index a9a5cdf8ba24..000000000000
--- a/target/linux/generic/pending-6.1/191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Daniel González Cabanelas <dgcbueu@gmail.com>
-Subject: [PATCH 2/2] rtc: rs5c372: let the alarm to be used as wakeup source
-
-Currently there is no use for the interrupts on the rs5c372 RTC and the
-wakealarm isn't enabled. There are some devices like NASes which use this
-RTC to wake up from the power off state when the INTR pin is activated by
-the alarm clock.
-
-Enable the alarm and let to be used as a wakeup source.
-
-Tested on a Buffalo LS421DE NAS.
-
-Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
----
- drivers/rtc/rtc-rs5c372.c | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/drivers/rtc/rtc-rs5c372.c
-+++ b/drivers/rtc/rtc-rs5c372.c
-@@ -833,6 +833,7 @@ static int rs5c372_probe(struct i2c_clie
- 	int err = 0;
- 	int smbus_mode = 0;
- 	struct rs5c372 *rs5c372;
-+	bool rs5c372_can_wakeup_device = false;
- 
- 	dev_dbg(&client->dev, "%s\n", __func__);
- 
-@@ -868,6 +869,12 @@ static int rs5c372_probe(struct i2c_clie
- 	else
- 		rs5c372->type = id->driver_data;
- 
-+#ifdef CONFIG_OF
-+	if(of_property_read_bool(client->dev.of_node,
-+					      "wakeup-source"))
-+		rs5c372_can_wakeup_device = true;
-+#endif
-+
- 	/* we read registers 0x0f then 0x00-0x0f; skip the first one */
- 	rs5c372->regs = &rs5c372->buf[1];
- 	rs5c372->smbus = smbus_mode;
-@@ -901,6 +908,8 @@ static int rs5c372_probe(struct i2c_clie
- 		goto exit;
- 	}
- 
-+	rs5c372->has_irq = 1;
-+
- 	/* if the oscillator lost power and no other software (like
- 	 * the bootloader) set it up, do it here.
- 	 *
-@@ -927,6 +936,10 @@ static int rs5c372_probe(struct i2c_clie
- 			);
- 
- 	/* REVISIT use client->irq to register alarm irq ... */
-+	if (rs5c372_can_wakeup_device) {
-+		device_init_wakeup(&client->dev, true);
-+	}
-+
- 	rs5c372->rtc = devm_rtc_device_register(&client->dev,
- 					rs5c372_driver.driver.name,
- 					&rs5c372_rtc_ops, THIS_MODULE);
-@@ -940,6 +953,10 @@ static int rs5c372_probe(struct i2c_clie
- 	if (err)
- 		goto exit;
- 
-+	/* the rs5c372 alarm only supports a minute accuracy */
-+	set_bit(RTC_FEATURE_ALARM_RES_MINUTE, rs5c372->rtc->features);
-+	clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rs5c372->rtc->features);
-+
- 	return 0;
- 
- exit:
diff --git a/target/linux/generic/pending-6.1/203-kallsyms_uncompressed.patch b/target/linux/generic/pending-6.1/203-kallsyms_uncompressed.patch
deleted file mode 100644
index 78ed262b786c..000000000000
--- a/target/linux/generic/pending-6.1/203-kallsyms_uncompressed.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
-
-[john@phrozen.org: added to my upstream queue 30.12.2016]
-lede-commit: e0e3509b5ce2ccf93d4d67ea907613f5f7ec2eed
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- init/Kconfig            | 11 +++++++++++
- kernel/kallsyms.c       |  8 ++++++++
- scripts/kallsyms.c      | 12 ++++++++++++
- scripts/link-vmlinux.sh |  4 ++++
- 4 files changed, 35 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1491,6 +1491,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
- 	  the unaligned access emulation.
- 	  see arch/parisc/kernel/unaligned.c for reference
- 
-+config KALLSYMS_UNCOMPRESSED
-+	bool "Keep kallsyms uncompressed"
-+	depends on KALLSYMS
-+	help
-+		Normally kallsyms contains compressed symbols (using a token table),
-+		reducing the uncompressed kernel image size. Keeping the symbol table
-+		uncompressed significantly improves the size of this part in compressed
-+		kernel images.
-+
-+		Say N unless you need compressed kernel images to be small.
-+
- config HAVE_PCSPKR_PLATFORM
- 	bool
- 
---- a/kernel/kallsyms.c
-+++ b/kernel/kallsyms.c
-@@ -69,6 +69,11 @@ static unsigned int kallsyms_expand_symb
- 	 * For every byte on the compressed symbol data, copy the table
- 	 * entry for that byte.
- 	 */
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	memcpy(result, data + 1, len - 1);
-+	result += len - 1;
-+	len = 0;
-+#endif
- 	while (len) {
- 		tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
- 		data++;
-@@ -101,6 +106,9 @@ tail:
-  */
- static char kallsyms_get_symbol_type(unsigned int off)
- {
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+	return kallsyms_names[off + 1];
-+#endif
- 	/*
- 	 * Get just the first code, look it up in the token table,
- 	 * and return the first char from this token.
---- a/scripts/kallsyms.c
-+++ b/scripts/kallsyms.c
-@@ -77,6 +77,7 @@ static struct addr_range percpu_range =
- static struct sym_entry **table;
- static unsigned int table_size, table_cnt;
- static int all_symbols;
-+static int uncompressed;
- static int absolute_percpu;
- static int base_relative;
- static int lto_clang;
-@@ -608,6 +609,9 @@ static void write_src(void)
- 			(unsigned char)(table[i]->seq >> 0));
- 	printf("\n");
- 
-+	if (uncompressed)
-+		return;
-+
- 	output_label("kallsyms_token_table");
- 	off = 0;
- 	for (i = 0; i < 256; i++) {
-@@ -659,6 +663,9 @@ static unsigned char *find_token(unsigne
- {
- 	int i;
- 
-+	if (uncompressed)
-+		return NULL;
-+
- 	for (i = 0; i < len - 1; i++) {
- 		if (str[i] == token[0] && str[i+1] == token[1])
- 			return &str[i];
-@@ -731,6 +738,9 @@ static void optimize_result(void)
- {
- 	int i, best;
- 
-+	if (uncompressed)
-+		return;
-+
- 	/* using the '\0' symbol last allows compress_symbols to use standard
- 	 * fast string functions */
- 	for (i = 255; i >= 0; i--) {
-@@ -892,6 +902,7 @@ int main(int argc, char **argv)
- 			{"absolute-percpu", no_argument, &absolute_percpu, 1},
- 			{"base-relative",   no_argument, &base_relative,   1},
- 			{"lto-clang",       no_argument, &lto_clang,       1},
-+			{"uncompressed",   no_argument, &uncompressed,   1},
- 			{},
- 		};
- 
---- a/scripts/link-vmlinux.sh
-+++ b/scripts/link-vmlinux.sh
-@@ -165,6 +165,10 @@ kallsyms()
- 		kallsymopt="${kallsymopt} --lto-clang"
- 	fi
- 
-+	if is_enabled CONFIG_KALLSYMS_UNCOMPRESSED; then
-+		kallsymopt="${kallsymopt} --uncompressed"
-+	fi
-+
- 	info KSYMS ${2}
- 	scripts/kallsyms ${kallsymopt} ${1} > ${2}
- }
diff --git a/target/linux/generic/pending-6.1/205-backtrace_module_info.patch b/target/linux/generic/pending-6.1/205-backtrace_module_info.patch
deleted file mode 100644
index 27a134798196..000000000000
--- a/target/linux/generic/pending-6.1/205-backtrace_module_info.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
-
-[john@phrozen.org: felix will add this to his upstream queue]
-
-lede-commit 53827cdc824556cda910b23ce5030c363b8f1461
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- lib/vsprintf.c | 15 +++++++++++----
- 1 file changed, 11 insertions(+), 4 deletions(-)
-
---- a/lib/vsprintf.c
-+++ b/lib/vsprintf.c
-@@ -985,8 +985,10 @@ char *symbol_string(char *buf, char *end
- 		    struct printf_spec spec, const char *fmt)
- {
- 	unsigned long value;
--#ifdef CONFIG_KALLSYMS
- 	char sym[KSYM_SYMBOL_LEN];
-+#ifndef CONFIG_KALLSYMS
-+	struct module *mod;
-+	int len;
- #endif
- 
- 	if (fmt[1] == 'R')
-@@ -1007,8 +1009,14 @@ char *symbol_string(char *buf, char *end
- 
- 	return string_nocheck(buf, end, sym, spec);
- #else
--	return special_hex_number(buf, end, value, sizeof(void *));
-+	len = snprintf(sym, sizeof(sym), "0x%lx", value);
-+	mod = __module_address(value);
-+	if (mod)
-+		snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
-+			 mod->name, mod->core_layout.base,
-+			 mod->core_layout.size);
- #endif
-+	return string(buf, end, sym, spec);
- }
- 
- static const struct printf_spec default_str_spec = {
diff --git a/target/linux/generic/pending-6.1/240-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/pending-6.1/240-remove-unsane-filenames-from-deps_initramfs-list.patch
deleted file mode 100644
index 9e78284ecf70..000000000000
--- a/target/linux/generic/pending-6.1/240-remove-unsane-filenames-from-deps_initramfs-list.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: usr: sanitize deps_initramfs list
-
-If any filename in the intramfs dependency
-list contains a colon, that causes a kernel
-build error like this:
-
-/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
-make[5]: *** [usr] Error 2
-
-Fix it by removing such filenames from the
-deps_initramfs list.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- usr/Makefile | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/usr/Makefile
-+++ b/usr/Makefile
-@@ -56,6 +56,8 @@ hostprogs := gen_init_cpio
- # The dependency list is generated by gen_initramfs.sh -l
- -include $(obj)/.initramfs_data.cpio.d
- 
-+deps_initramfs := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
-+
- # do not try to update files included in initramfs
- $(deps_initramfs): ;
- 
diff --git a/target/linux/generic/pending-6.1/261-enable_wilink_platform_without_drivers.patch b/target/linux/generic/pending-6.1/261-enable_wilink_platform_without_drivers.patch
deleted file mode 100644
index cd31f9d93429..000000000000
--- a/target/linux/generic/pending-6.1/261-enable_wilink_platform_without_drivers.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: [PATCH] hack: net: wireless: make the wl12xx glue code available with
- compat-wireless, too
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- drivers/net/wireless/ti/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ti/Kconfig
-+++ b/drivers/net/wireless/ti/Kconfig
-@@ -20,7 +20,7 @@ source "drivers/net/wireless/ti/wlcore/K
- 
- config WILINK_PLATFORM_DATA
- 	bool "TI WiLink platform data"
--	depends on WLCORE_SDIO || WL1251_SDIO
-+	depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS
- 	default y
- 	help
- 	Small platform data bit needed to pass data to the sdio modules.
diff --git a/target/linux/generic/pending-6.1/270-platform-mikrotik-build-bits.patch b/target/linux/generic/pending-6.1/270-platform-mikrotik-build-bits.patch
deleted file mode 100644
index 997e6142a70e..000000000000
--- a/target/linux/generic/pending-6.1/270-platform-mikrotik-build-bits.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From c2deb5ef01a0ef09088832744cbace9e239a6ee0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= <hacks@slashdirt.org>
-Date: Sat, 28 Mar 2020 12:11:50 +0100
-Subject: [PATCH] generic: platform/mikrotik build bits (5.4)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds platform/mikrotik kernel build bits
-
-Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
----
- drivers/platform/Kconfig  | 2 ++
- drivers/platform/Makefile | 1 +
- 2 files changed, 3 insertions(+)
-
---- a/drivers/platform/Kconfig
-+++ b/drivers/platform/Kconfig
-@@ -16,3 +16,5 @@ source "drivers/platform/olpc/Kconfig"
- source "drivers/platform/surface/Kconfig"
- 
- source "drivers/platform/x86/Kconfig"
-+
-+source "drivers/platform/mikrotik/Kconfig"
---- a/drivers/platform/Makefile
-+++ b/drivers/platform/Makefile
-@@ -11,3 +11,4 @@ obj-$(CONFIG_OLPC_EC)		+= olpc/
- obj-$(CONFIG_GOLDFISH)		+= goldfish/
- obj-$(CONFIG_CHROME_PLATFORMS)	+= chrome/
- obj-$(CONFIG_SURFACE_PLATFORMS)	+= surface/
-+obj-$(CONFIG_MIKROTIK)		+= mikrotik/
diff --git a/target/linux/generic/pending-6.1/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-6.1/300-mips_expose_boot_raw.patch
deleted file mode 100644
index d222ec060e8b..000000000000
--- a/target/linux/generic/pending-6.1/300-mips_expose_boot_raw.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From: Mark Miller <mark@mirell.org>
-Subject: mips: expose CONFIG_BOOT_RAW
-
-This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
-certain Broadcom chipsets running CFE in order to load the kernel.
-
-Signed-off-by: Mark Miller <mark@mirell.org>
-Acked-by: Rob Landley <rob@landley.net>
----
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1035,9 +1035,6 @@ config FW_ARC
- config ARCH_MAY_HAVE_PC_FDC
- 	bool
- 
--config BOOT_RAW
--	bool
--
- config CEVT_BCM1480
- 	bool
- 
-@@ -3093,6 +3090,18 @@ choice
- 		bool "Extend builtin kernel arguments with bootloader arguments"
- endchoice
- 
-+config BOOT_RAW
-+	bool "Enable the kernel to be executed from the load address"
-+	default n
-+	help
-+	 Allow the kernel to be executed from the load address for
-+	 bootloaders which cannot read the ELF format. This places
-+	 a jump to start_kernel at the load address.
-+
-+	 If unsure, say N.
-+
-+
-+
- endmenu
- 
- config LOCKDEP_SUPPORT
diff --git a/target/linux/generic/pending-6.1/301-MIPS-Add-barriers-between-dcache-icache-flushes.patch b/target/linux/generic/pending-6.1/301-MIPS-Add-barriers-between-dcache-icache-flushes.patch
deleted file mode 100644
index bd56adad3a05..000000000000
--- a/target/linux/generic/pending-6.1/301-MIPS-Add-barriers-between-dcache-icache-flushes.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From e6e6ef4275978823ec3a84133fc91f4ffbef5c84 Mon Sep 17 00:00:00 2001
-From: Paul Burton <paul.burton@imgtec.com>
-Date: Mon, 22 Feb 2016 18:09:44 +0000
-Subject: [PATCH] MIPS: Add barriers between dcache & icache flushes
-
-Index-based cache operations may be arbitrarily reordered by out of
-order CPUs. Thus code which writes back the dcache & then invalidates
-the icache using indexed cache ops must include a barrier between
-operating on the 2 caches in order to prevent the scenario in which:
-
-  - icache invalidation occurs.
-
-  - icache fetch occurs, due to speculation.
-
-  - dcache writeback occurs.
-
-If the above were allowed to happen then the icache would contain stale
-data. Forcing the dcache writeback to complete before the icache
-invalidation avoids this.
-
-Signed-off-by: Paul Burton <paul.burton@imgtec.com>
-Cc: James Hogan <james.hogan@imgtec.com>
----
- arch/mips/mm/c-r4k.c | 13 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -514,6 +514,7 @@ static inline void local_r4k___flush_cac
- 
- 	default:
- 		r4k_blast_dcache();
-+		mb(); /* cache instructions may be reordered */
- 		r4k_blast_icache();
- 		break;
- 	}
-@@ -594,8 +595,10 @@ static inline void local_r4k_flush_cache
- 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc))
- 		r4k_blast_dcache();
- 	/* If executable, blast stale lines from icache */
--	if (exec)
-+	if (exec) {
-+		mb(); /* cache instructions may be reordered */
- 		r4k_blast_icache();
-+	}
- }
- 
- static void r4k_flush_cache_range(struct vm_area_struct *vma,
-@@ -696,8 +699,13 @@ static inline void local_r4k_flush_cache
- 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
- 		vaddr ? r4k_blast_dcache_page(addr) :
- 			r4k_blast_dcache_user_page(addr);
--		if (exec && !cpu_icache_snoops_remote_store)
-+		if (exec)
-+			mb(); /* cache instructions may be reordered */
-+
-+		if (exec && !cpu_icache_snoops_remote_store) {
- 			r4k_blast_scache_page(addr);
-+			mb(); /* cache instructions may be reordered */
-+		}
- 	}
- 	if (exec) {
- 		if (vaddr && cpu_has_vtag_icache && mm == current->active_mm) {
-@@ -764,6 +772,7 @@ static inline void __local_r4k_flush_ica
- 			else
- 				blast_dcache_range(start, end);
- 		}
-+		mb(); /* cache instructions may be reordered */
- 	}
- 
- 	if (type == R4K_INDEX ||
diff --git a/target/linux/generic/pending-6.1/302-mips_no_branch_likely.patch b/target/linux/generic/pending-6.1/302-mips_no_branch_likely.patch
deleted file mode 100644
index 542fba651f29..000000000000
--- a/target/linux/generic/pending-6.1/302-mips_no_branch_likely.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: use -mno-branch-likely for kernel and userspace
-
-saves ~11k kernel size after lzma and ~12k squashfs size in the
-
-lede-commit: 41a039f46450ffae9483d6216422098669da2900
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -94,7 +94,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- # machines may also.  Since BFD is incredibly buggy with respect to
- # crossformat linking we rely on the elf2ecoff tool for format conversion.
- #
--cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
-+cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
diff --git a/target/linux/generic/pending-6.1/305-mips_module_reloc.patch b/target/linux/generic/pending-6.1/305-mips_module_reloc.patch
deleted file mode 100644
index 5de9019677e1..000000000000
--- a/target/linux/generic/pending-6.1/305-mips_module_reloc.patch
+++ /dev/null
@@ -1,370 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: replace -mlong-calls with -mno-long-calls to make function calls faster in kernel modules to achieve this, try to
-
-lede-commit: 3b3d64743ba2a874df9d70cd19e242205b0a788c
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile             |   5 +
- arch/mips/include/asm/module.h |   5 +
- arch/mips/kernel/module.c      | 279 ++++++++++++++++++++++++++++++++++++++++-
- 3 files changed, 284 insertions(+), 5 deletions(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -97,8 +97,18 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y			+= -msoft-float
- LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
-+ifdef CONFIG_64BIT
- KBUILD_AFLAGS_MODULE		+= -mlong-calls
- KBUILD_CFLAGS_MODULE		+= -mlong-calls
-+else
-+  ifdef CONFIG_DYNAMIC_FTRACE
-+    KBUILD_AFLAGS_MODULE	+= -mlong-calls
-+    KBUILD_CFLAGS_MODULE	+= -mlong-calls
-+  else
-+    KBUILD_AFLAGS_MODULE	+= -mno-long-calls
-+    KBUILD_CFLAGS_MODULE	+= -mno-long-calls
-+  endif
-+endif
- 
- ifeq ($(CONFIG_RELOCATABLE),y)
- LDFLAGS_vmlinux			+= --emit-relocs
---- a/arch/mips/include/asm/module.h
-+++ b/arch/mips/include/asm/module.h
-@@ -12,6 +12,11 @@ struct mod_arch_specific {
- 	const struct exception_table_entry *dbe_start;
- 	const struct exception_table_entry *dbe_end;
- 	struct mips_hi16 *r_mips_hi16_list;
-+
-+	void *phys_plt_tbl;
-+	void *virt_plt_tbl;
-+	unsigned int phys_plt_offset;
-+	unsigned int virt_plt_offset;
- };
- 
- typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
---- a/arch/mips/kernel/module.c
-+++ b/arch/mips/kernel/module.c
-@@ -32,23 +32,261 @@ struct mips_hi16 {
- static LIST_HEAD(dbe_list);
- static DEFINE_SPINLOCK(dbe_lock);
- 
--#ifdef MODULE_START
-+/*
-+ * Get the potential max trampolines size required of the init and
-+ * non-init sections. Only used if we cannot find enough contiguous
-+ * physically mapped memory to put the module into.
-+ */
-+static unsigned int
-+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-+             const char *secstrings, unsigned int symindex, bool is_init)
-+{
-+	unsigned long ret = 0;
-+	unsigned int i, j;
-+	Elf_Sym *syms;
-+
-+	/* Everything marked ALLOC (this includes the exported symbols) */
-+	for (i = 1; i < hdr->e_shnum; ++i) {
-+		unsigned int info = sechdrs[i].sh_info;
-+
-+		if (sechdrs[i].sh_type != SHT_REL
-+		    && sechdrs[i].sh_type != SHT_RELA)
-+			continue;
-+
-+		/* Not a valid relocation section? */
-+		if (info >= hdr->e_shnum)
-+			continue;
-+
-+		/* Don't bother with non-allocated sections */
-+		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-+			continue;
-+
-+		/* If it's called *.init*, and we're not init, we're
-+                   not interested */
-+		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-+		    != is_init)
-+			continue;
-+
-+		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
-+		if (sechdrs[i].sh_type == SHT_REL) {
-+			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rel[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		} else {
-+			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
-+			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
-+
-+			for (j = 0; j < size; ++j) {
-+				Elf_Sym *sym;
-+
-+				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
-+					continue;
-+
-+				sym = syms + ELF_MIPS_R_SYM(rela[j]);
-+				if (!is_init && sym->st_shndx != SHN_UNDEF)
-+					continue;
-+
-+				ret += 4 * sizeof(int);
-+			}
-+		}
-+	}
-+
-+	return ret;
-+}
-+
-+#ifndef MODULE_START
-+static void *alloc_phys(unsigned long size)
-+{
-+	unsigned order;
-+	struct page *page;
-+	struct page *p;
-+
-+	size = PAGE_ALIGN(size);
-+	order = get_order(size);
-+
-+	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
-+			__GFP_THISNODE, order);
-+	if (!page)
-+		return NULL;
-+
-+	split_page(page, order);
-+
-+	/* mark all pages except for the last one */
-+	for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p)
-+		set_bit(PG_owner_priv_1, &p->flags);
-+
-+	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
-+		__free_page(p);
-+
-+	return page_address(page);
-+}
-+#endif
-+
-+static void free_phys(void *ptr)
-+{
-+	struct page *page;
-+	bool free;
-+
-+	page = virt_to_page(ptr);
-+	do {
-+		free = test_and_clear_bit(PG_owner_priv_1, &page->flags);
-+		__free_page(page);
-+		page++;
-+	} while (free);
-+}
-+
-+
- void *module_alloc(unsigned long size)
- {
-+#ifdef MODULE_START
- 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
- 				GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
- 				__builtin_return_address(0));
-+#else
-+	void *ptr;
-+
-+	if (size == 0)
-+		return NULL;
-+
-+	ptr = alloc_phys(size);
-+
-+	/* If we failed to allocate physically contiguous memory,
-+	 * fall back to regular vmalloc. The module loader code will
-+	 * create jump tables to handle long jumps */
-+	if (!ptr)
-+		return vmalloc(size);
-+
-+	return ptr;
-+#endif
- }
-+
-+static inline bool is_phys_addr(void *ptr)
-+{
-+#ifdef CONFIG_64BIT
-+	return (KSEGX((unsigned long)ptr) == CKSEG0);
-+#else
-+	return (KSEGX(ptr) == KSEG0);
- #endif
-+}
-+
-+/* Free memory returned from module_alloc */
-+void module_memfree(void *module_region)
-+{
-+	if (is_phys_addr(module_region))
-+		free_phys(module_region);
-+	else
-+		vfree(module_region);
-+}
-+
-+static void *__module_alloc(int size, bool phys)
-+{
-+	void *ptr;
-+
-+	if (phys)
-+		ptr = kmalloc(size, GFP_KERNEL);
-+	else
-+		ptr = vmalloc(size);
-+	return ptr;
-+}
-+
-+static void __module_free(void *ptr)
-+{
-+	if (is_phys_addr(ptr))
-+		kfree(ptr);
-+	else
-+		vfree(ptr);
-+}
-+
-+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
-+			      char *secstrings, struct module *mod)
-+{
-+	unsigned int symindex = 0;
-+	unsigned int core_size, init_size;
-+	int i;
-+
-+	mod->arch.phys_plt_offset = 0;
-+	mod->arch.virt_plt_offset = 0;
-+	mod->arch.phys_plt_tbl = NULL;
-+	mod->arch.virt_plt_tbl = NULL;
-+
-+	if (IS_ENABLED(CONFIG_64BIT))
-+		return 0;
-+
-+	for (i = 1; i < hdr->e_shnum; i++)
-+		if (sechdrs[i].sh_type == SHT_SYMTAB)
-+			symindex = i;
-+
-+	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
-+	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
-+
-+	if ((core_size + init_size) == 0)
-+		return 0;
-+
-+	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
-+	if (!mod->arch.phys_plt_tbl)
-+		return -ENOMEM;
-+
-+	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
-+	if (!mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
- 
- static void apply_r_mips_32(u32 *location, u32 base, Elf_Addr v)
- {
- 	*location = base + v;
- }
- 
-+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
-+				 void *start, Elf_Addr v)
-+{
-+	unsigned *tramp = start + *plt_offset;
-+	*plt_offset += 4 * sizeof(int);
-+
-+	/* adjust carry for addiu */
-+	if (v & 0x00008000)
-+		v += 0x10000;
-+
-+	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
-+	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
-+	tramp[2] = 0x03200008;                  /* jr t9 */
-+	tramp[3] = 0x00000000;                  /* nop */
-+
-+	return (Elf_Addr) tramp;
-+}
-+
-+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
-+{
-+	if (is_phys_addr(location))
-+		return add_plt_entry_to(&me->arch.phys_plt_offset,
-+				me->arch.phys_plt_tbl, v);
-+	else
-+		return add_plt_entry_to(&me->arch.virt_plt_offset,
-+				me->arch.virt_plt_tbl, v);
-+
-+}
-+
- static int apply_r_mips_26(struct module *me, u32 *location, u32 base,
- 			   Elf_Addr v)
- {
-+	u32 ofs = base & 0x03ffffff;
-+
- 	if (v % 4) {
- 		pr_err("module %s: dangerous R_MIPS_26 relocation\n",
- 		       me->name);
-@@ -56,13 +294,17 @@ static int apply_r_mips_26(struct module
- 	}
- 
- 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
--		pr_err("module %s: relocation overflow\n",
--		       me->name);
--		return -ENOEXEC;
-+		v = add_plt_entry(me, location, v + (ofs << 2));
-+		if (!v) {
-+			pr_err("module %s: relocation overflow\n",
-+			       me->name);
-+			return -ENOEXEC;
-+		}
-+		ofs = 0;
- 	}
- 
- 	*location = (*location & ~0x03ffffff) |
--		    ((base + (v >> 2)) & 0x03ffffff);
-+		    ((ofs + (v >> 2)) & 0x03ffffff);
- 
- 	return 0;
- }
-@@ -442,9 +684,36 @@ int module_finalize(const Elf_Ehdr *hdr,
- 		list_add(&me->arch.dbe_list, &dbe_list);
- 		spin_unlock_irq(&dbe_lock);
- 	}
-+
-+	/* Get rid of the fixup trampoline if we're running the module
-+	 * from physically mapped address space */
-+	if (me->arch.phys_plt_offset == 0) {
-+		__module_free(me->arch.phys_plt_tbl);
-+		me->arch.phys_plt_tbl = NULL;
-+	}
-+	if (me->arch.virt_plt_offset == 0) {
-+		__module_free(me->arch.virt_plt_tbl);
-+		me->arch.virt_plt_tbl = NULL;
-+	}
-+
- 	return 0;
- }
- 
-+void module_arch_freeing_init(struct module *mod)
-+{
-+	if (mod->state == MODULE_STATE_LIVE)
-+		return;
-+
-+	if (mod->arch.phys_plt_tbl) {
-+		__module_free(mod->arch.phys_plt_tbl);
-+		mod->arch.phys_plt_tbl = NULL;
-+	}
-+	if (mod->arch.virt_plt_tbl) {
-+		__module_free(mod->arch.virt_plt_tbl);
-+		mod->arch.virt_plt_tbl = NULL;
-+	}
-+}
-+
- void module_arch_cleanup(struct module *mod)
- {
- 	spin_lock_irq(&dbe_lock);
diff --git a/target/linux/generic/pending-6.1/308-mips32r2_tune.patch b/target/linux/generic/pending-6.1/308-mips32r2_tune.patch
deleted file mode 100644
index db410a6bc06d..000000000000
--- a/target/linux/generic/pending-6.1/308-mips32r2_tune.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
-
-This provides a good tradeoff across at least 24Kc-74Kc, while also
-producing smaller code.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -172,7 +172,7 @@ cflags-$(CONFIG_CPU_R4300)	+= -march=r43
- cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R1)	+= -march=mips32 -Wa,--trap
--cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -Wa,--trap
-+cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -mtune=34kc -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R5)	+= -march=mips32r5 -Wa,--trap -modd-spreg
- cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap -modd-spreg
- cflags-$(CONFIG_CPU_MIPS64_R1)	+= -march=mips64 -Wa,--trap
diff --git a/target/linux/generic/pending-6.1/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/pending-6.1/310-arm_module_unresolved_weak_sym.patch
deleted file mode 100644
index 54cc9ba64767..000000000000
--- a/target/linux/generic/pending-6.1/310-arm_module_unresolved_weak_sym.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fix errors in unresolved weak symbols on arm
-
-lede-commit: 570699d4838a907c3ef9f2819bf19eb72997b32f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/arm/kernel/module.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/kernel/module.c
-+++ b/arch/arm/kernel/module.c
-@@ -146,6 +146,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
- 			return -ENOEXEC;
- 		}
- 
-+		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
-+		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
-+			continue;
-+
- 		loc = dstsec->sh_addr + rel->r_offset;
- 
- 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/pending-6.1/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-6.1/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
deleted file mode 100644
index 3f553b28b34b..000000000000
--- a/target/linux/generic/pending-6.1/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
+++ /dev/null
@@ -1,282 +0,0 @@
-From: Yousong Zhou <yszhou4tech@gmail.com>
-Subject: MIPS: kexec: Accept command line parameters from userspace.
-
-Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
----
- arch/mips/kernel/machine_kexec.c   |  153 +++++++++++++++++++++++++++++++-----
- arch/mips/kernel/machine_kexec.h   |   20 +++++
- arch/mips/kernel/relocate_kernel.S |   21 +++--
- 3 files changed, 167 insertions(+), 27 deletions(-)
- create mode 100644 arch/mips/kernel/machine_kexec.h
-
---- a/arch/mips/kernel/machine_kexec.c
-+++ b/arch/mips/kernel/machine_kexec.c
-@@ -9,14 +9,11 @@
- #include <linux/delay.h>
- #include <linux/libfdt.h>
- 
-+#include <asm/bootinfo.h>
- #include <asm/cacheflush.h>
- #include <asm/page.h>
--
--extern const unsigned char relocate_new_kernel[];
--extern const size_t relocate_new_kernel_size;
--
--extern unsigned long kexec_start_address;
--extern unsigned long kexec_indirection_page;
-+#include <linux/uaccess.h>
-+#include "machine_kexec.h"
- 
- static unsigned long reboot_code_buffer;
- 
-@@ -30,6 +27,101 @@ void (*_crash_smp_send_stop)(void) = NUL
- void (*_machine_kexec_shutdown)(void) = NULL;
- void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL;
- 
-+static void machine_kexec_print_args(void)
-+{
-+	unsigned long argc = (int)kexec_args[0];
-+	int i;
-+
-+	pr_info("kexec_args[0] (argc): %lu\n", argc);
-+	pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
-+	pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
-+	pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
-+
-+	for (i = 0; i < argc; i++) {
-+		pr_info("kexec_argv[%d] = %p, %s\n",
-+				i, kexec_argv[i], kexec_argv[i]);
-+	}
-+}
-+
-+static void machine_kexec_init_argv(struct kimage *image)
-+{
-+	void __user *buf = NULL;
-+	size_t bufsz;
-+	size_t size;
-+	int i;
-+
-+	bufsz = 0;
-+	for (i = 0; i < image->nr_segments; i++) {
-+		struct kexec_segment *seg;
-+
-+		seg = &image->segment[i];
-+		if (seg->bufsz < 6)
-+			continue;
-+
-+		if (strncmp((char *) seg->buf, "kexec ", 6))
-+			continue;
-+
-+		buf = seg->buf;
-+		bufsz = seg->bufsz;
-+		break;
-+	}
-+
-+	if (!buf)
-+		return;
-+
-+	size = KEXEC_COMMAND_LINE_SIZE;
-+	size = min(size, bufsz);
-+	if (size < bufsz)
-+		pr_warn("kexec command line truncated to %zd bytes\n", size);
-+
-+	/* Copy to kernel space */
-+	if (copy_from_user(kexec_argv_buf, buf, size))
-+		pr_warn("kexec command line copy to kernel space failed\n");
-+
-+	kexec_argv_buf[size - 1] = 0;
-+}
-+
-+static void machine_kexec_parse_argv(struct kimage *image)
-+{
-+	char *reboot_code_buffer;
-+	int reloc_delta;
-+	char *ptr;
-+	int argc;
-+	int i;
-+
-+	ptr = kexec_argv_buf;
-+	argc = 0;
-+
-+	/*
-+	 * convert command line string to array of parameters
-+	 * (as bootloader does).
-+	 */
-+	while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
-+		if (*ptr == ' ') {
-+			*ptr++ = '\0';
-+			continue;
-+		}
-+
-+		kexec_argv[argc++] = ptr;
-+		ptr = strchr(ptr, ' ');
-+	}
-+
-+	if (!argc)
-+		return;
-+
-+	kexec_args[0] = argc;
-+	kexec_args[1] = (unsigned long)kexec_argv;
-+	kexec_args[2] = 0;
-+	kexec_args[3] = 0;
-+
-+	reboot_code_buffer = page_address(image->control_code_page);
-+	reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
-+
-+	kexec_args[1] += reloc_delta;
-+	for (i = 0; i < argc; i++)
-+		kexec_argv[i] += reloc_delta;
-+}
-+
- static void kexec_image_info(const struct kimage *kimage)
- {
- 	unsigned long i;
-@@ -99,6 +191,18 @@ machine_kexec_prepare(struct kimage *kim
- #endif
- 
- 	kexec_image_info(kimage);
-+	/*
-+	 * Whenever arguments passed from kexec-tools, Init the arguments as
-+	 * the original ones to try avoiding booting failure.
-+	 */
-+
-+	kexec_args[0] = fw_arg0;
-+	kexec_args[1] = fw_arg1;
-+	kexec_args[2] = fw_arg2;
-+	kexec_args[3] = fw_arg3;
-+
-+	machine_kexec_init_argv(kimage);
-+	machine_kexec_parse_argv(kimage);
- 
- 	if (_machine_kexec_prepare)
- 		return _machine_kexec_prepare(kimage);
-@@ -161,7 +265,7 @@ machine_crash_shutdown(struct pt_regs *r
- void kexec_nonboot_cpu_jump(void)
- {
- 	local_flush_icache_range((unsigned long)relocated_kexec_smp_wait,
--				 reboot_code_buffer + relocate_new_kernel_size);
-+				 reboot_code_buffer + KEXEC_RELOCATE_NEW_KERNEL_SIZE);
- 
- 	relocated_kexec_smp_wait(NULL);
- }
-@@ -199,7 +303,7 @@ void kexec_reboot(void)
- 	 * machine_kexec() CPU.
- 	 */
- 	local_flush_icache_range(reboot_code_buffer,
--				 reboot_code_buffer + relocate_new_kernel_size);
-+				 reboot_code_buffer + KEXEC_RELOCATE_NEW_KERNEL_SIZE);
- 
- 	do_kexec = (void *)reboot_code_buffer;
- 	do_kexec();
-@@ -212,10 +316,12 @@ machine_kexec(struct kimage *image)
- 	unsigned long *ptr;
- 
- 	reboot_code_buffer =
--	  (unsigned long)page_address(image->control_code_page);
-+		(unsigned long)page_address(image->control_code_page);
-+	pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
- 
- 	kexec_start_address =
- 		(unsigned long) phys_to_virt(image->start);
-+	pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
- 
- 	if (image->type == KEXEC_TYPE_DEFAULT) {
- 		kexec_indirection_page =
-@@ -223,9 +329,19 @@ machine_kexec(struct kimage *image)
- 	} else {
- 		kexec_indirection_page = (unsigned long)&image->head;
- 	}
-+	pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
- 
--	memcpy((void*)reboot_code_buffer, relocate_new_kernel,
--	       relocate_new_kernel_size);
-+	pr_info("Where is memcpy: %p\n", memcpy);
-+	pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
-+		(void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
-+	pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
-+		(void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
-+	memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
-+	       KEXEC_RELOCATE_NEW_KERNEL_SIZE);
-+
-+	pr_info("Before _print_args().\n");
-+	machine_kexec_print_args();
-+	pr_info("Before eval loop.\n");
- 
- 	/*
- 	 * The generic kexec code builds a page list with physical
-@@ -256,7 +372,7 @@ machine_kexec(struct kimage *image)
- #ifdef CONFIG_SMP
- 	/* All secondary cpus now may jump to kexec_wait cycle */
- 	relocated_kexec_smp_wait = reboot_code_buffer +
--		(void *)(kexec_smp_wait - relocate_new_kernel);
-+		(void *)(kexec_smp_wait - kexec_relocate_new_kernel);
- 	smp_wmb();
- 	atomic_set(&kexec_ready_to_reboot, 1);
- #endif
---- /dev/null
-+++ b/arch/mips/kernel/machine_kexec.h
-@@ -0,0 +1,20 @@
-+#ifndef _MACHINE_KEXEC_H
-+#define _MACHINE_KEXEC_H
-+
-+#ifndef __ASSEMBLY__
-+extern const unsigned char kexec_relocate_new_kernel[];
-+extern unsigned long kexec_relocate_new_kernel_end;
-+extern unsigned long kexec_start_address;
-+extern unsigned long kexec_indirection_page;
-+
-+extern char kexec_argv_buf[];
-+extern char *kexec_argv[];
-+
-+#define KEXEC_RELOCATE_NEW_KERNEL_SIZE	((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
-+#endif /* !__ASSEMBLY__ */
-+
-+#define KEXEC_COMMAND_LINE_SIZE		256
-+#define KEXEC_ARGV_SIZE			(KEXEC_COMMAND_LINE_SIZE / 16)
-+#define KEXEC_MAX_ARGC			(KEXEC_ARGV_SIZE / sizeof(long))
-+
-+#endif
---- a/arch/mips/kernel/relocate_kernel.S
-+++ b/arch/mips/kernel/relocate_kernel.S
-@@ -10,10 +10,11 @@
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
- #include <asm/addrspace.h>
-+#include "machine_kexec.h"
- 
- #include <kernel-entry-init.h>
- 
--LEAF(relocate_new_kernel)
-+LEAF(kexec_relocate_new_kernel)
- 	PTR_L a0,	arg0
- 	PTR_L a1,	arg1
- 	PTR_L a2,	arg2
-@@ -98,7 +99,7 @@ done:
- #endif
- 	/* jump to kexec_start_address */
- 	j		s1
--	END(relocate_new_kernel)
-+	END(kexec_relocate_new_kernel)
- 
- #ifdef CONFIG_SMP
- /*
-@@ -177,8 +178,15 @@ EXPORT(kexec_indirection_page)
- 	PTR_WD		0
- 	.size		kexec_indirection_page, PTRSIZE
- 
--relocate_new_kernel_end:
-+kexec_argv_buf:
-+	EXPORT(kexec_argv_buf)
-+	.skip		KEXEC_COMMAND_LINE_SIZE
-+	.size		kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
-+
-+kexec_argv:
-+	EXPORT(kexec_argv)
-+	.skip		KEXEC_ARGV_SIZE
-+	.size		kexec_argv, KEXEC_ARGV_SIZE
- 
--EXPORT(relocate_new_kernel_size)
--	PTR_WD		relocate_new_kernel_end - relocate_new_kernel
--	.size		relocate_new_kernel_size, PTRSIZE
-+kexec_relocate_new_kernel_end:
-+	EXPORT(kexec_relocate_new_kernel_end)
diff --git a/target/linux/generic/pending-6.1/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-6.1/332-arc-add-OWRTDTB-section.patch
deleted file mode 100644
index 30158cf399b1..000000000000
--- a/target/linux/generic/pending-6.1/332-arc-add-OWRTDTB-section.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From bb0c3b0175240bf152fd7c644821a0cf9f77c37c Mon Sep 17 00:00:00 2001
-From: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
-Date: Fri, 15 Mar 2019 18:53:38 +0300
-Subject: [PATCH] arc add OWRTDTB section
-
-This change allows OpenWRT to patch resulting kernel binary with
-external .dtb.
-
-That allows us to re-use exactky the same vmlinux on different boards
-given its ARC core configurations match (at least cache line sizes etc).
-
-""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external
-.dtb right after it, keeping the string in place.
-
-Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
-Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
----
- arch/arc/kernel/head.S        | 10 ++++++++++
- arch/arc/kernel/setup.c       |  4 +++-
- arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++
- 3 files changed, 26 insertions(+), 1 deletion(-)
-
---- a/arch/arc/kernel/head.S
-+++ b/arch/arc/kernel/head.S
-@@ -88,6 +88,16 @@
- 	DSP_EARLY_INIT
- .endm
- 
-+	; Here "patch-dtb" will embed external .dtb
-+	; Note "patch-dtb" searches for ASCII "OWRTDTB:" string
-+	; and pastes .dtb right after it, hense the string precedes
-+	; __image_dtb symbol.
-+	.section .owrt, "aw",@progbits
-+	.ascii  "OWRTDTB:"
-+ENTRY(__image_dtb)
-+	.fill   0x4000
-+END(__image_dtb)
-+
- 	.section .init.text, "ax",@progbits
- 
- ;----------------------------------------------------------------
---- a/arch/arc/kernel/setup.c
-+++ b/arch/arc/kernel/setup.c
-@@ -495,6 +495,8 @@ static inline bool uboot_arg_invalid(uns
- /* We always pass 0 as magic from U-boot */
- #define UBOOT_MAGIC_VALUE	0
- 
-+extern struct boot_param_header __image_dtb;
-+
- void __init handle_uboot_args(void)
- {
- 	bool use_embedded_dtb = true;
-@@ -533,7 +535,7 @@ void __init handle_uboot_args(void)
- ignore_uboot_args:
- 
- 	if (use_embedded_dtb) {
--		machine_desc = setup_machine_fdt(__dtb_start);
-+		machine_desc = setup_machine_fdt(&__image_dtb);
- 		if (!machine_desc)
- 			panic("Embedded DT invalid\n");
- 	}
---- a/arch/arc/kernel/vmlinux.lds.S
-+++ b/arch/arc/kernel/vmlinux.lds.S
-@@ -27,6 +27,19 @@ SECTIONS
- 
- 	. = CONFIG_LINUX_LINK_BASE;
- 
-+	/*
-+	* In OpenWRT we want to patch built binary embedding .dtb of choice.
-+	* This is implemented with "patch-dtb" utility which searches for
-+	* "OWRTDTB:" string in first 16k of image and if it is found
-+	* copies .dtb right after mentioned string.
-+	*
-+	* Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it.
-+	*/
-+ 	.owrt : {
-+		*(.owrt)
-+	. = ALIGN(PAGE_SIZE);
-+	}
-+
- 	_int_vec_base_lds = .;
- 	.vector : {
- 		*(.vector)
diff --git a/target/linux/generic/pending-6.1/333-arc-enable-unaligned-access-in-kernel-mode.patch b/target/linux/generic/pending-6.1/333-arc-enable-unaligned-access-in-kernel-mode.patch
deleted file mode 100644
index 1848a84cc497..000000000000
--- a/target/linux/generic/pending-6.1/333-arc-enable-unaligned-access-in-kernel-mode.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Subject: arc: enable unaligned access in kernel mode
-
-This enables misaligned access handling even in kernel mode.
-Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses
-here and there and to cope with that without fixing stuff in the drivers
-we're just gracefully handling it on ARC.
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
----
- arch/arc/kernel/unaligned.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arc/kernel/unaligned.c
-+++ b/arch/arc/kernel/unaligned.c
-@@ -202,7 +202,7 @@ int misaligned_fixup(unsigned long addre
- 	char buf[TASK_COMM_LEN];
- 
- 	/* handle user mode only and only if enabled by sysadmin */
--	if (!user_mode(regs) || !unaligned_enabled)
-+	if (!unaligned_enabled)
- 		return 1;
- 
- 	if (no_unaligned_warning) {
diff --git a/target/linux/generic/pending-6.1/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch b/target/linux/generic/pending-6.1/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
deleted file mode 100644
index e9b47d185d2a..000000000000
--- a/target/linux/generic/pending-6.1/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 66770a004afe10df11d3902e16eaa0c2c39436bb Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 24 May 2019 17:56:19 +0200
-Subject: [PATCH] powerpc: Enable kernel XZ compression option on PPC_85xx
-
-Enable kernel XZ compression option on PPC_85xx. Tested with
-simpleImage on TP-Link TL-WDR4900 (Freescale P1014 processor).
-
-Suggested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -229,7 +229,7 @@ config PPC
- 	select HAVE_KERNEL_GZIP
- 	select HAVE_KERNEL_LZMA			if DEFAULT_UIMAGE
- 	select HAVE_KERNEL_LZO			if DEFAULT_UIMAGE
--	select HAVE_KERNEL_XZ			if PPC_BOOK3S || 44x
-+	select HAVE_KERNEL_XZ			if PPC_BOOK3S || 44x || PPC_85xx
- 	select HAVE_KPROBES
- 	select HAVE_KPROBES_ON_FTRACE
- 	select HAVE_KRETPROBES
diff --git a/target/linux/generic/pending-6.1/350-mips-kernel-fix-detect_memory_region-function.patch b/target/linux/generic/pending-6.1/350-mips-kernel-fix-detect_memory_region-function.patch
deleted file mode 100644
index 3bf7ae98bf35..000000000000
--- a/target/linux/generic/pending-6.1/350-mips-kernel-fix-detect_memory_region-function.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: Shiji Yang <yangshiji66@outlook.com>
-Date: Wed, 13 Mar 2024 20:28:37 +0800
-Subject: [PATCH] mips: kernel: fix detect_memory_region() function
-
-1. Do not use memcmp() on unallocated memory, as the new introduced
-   fortify dynamic object size check[1] will report unexpected result.
-2. Use a fixed pattern instead of a random function pointer as the
-   magic value.
-3. Flip magic value and double check it.
-4. Enable this feature only for 32-bit CPUs. Currently, only ath79 and
-   ralink CPUs are using it.
-
-[1] 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when available")
-Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
----
- arch/mips/include/asm/bootinfo.h |  2 ++
- arch/mips/kernel/setup.c         | 17 ++++++++++++-----
- 2 files changed, 14 insertions(+), 5 deletions(-)
-
---- a/arch/mips/include/asm/bootinfo.h
-+++ b/arch/mips/include/asm/bootinfo.h
-@@ -93,7 +93,9 @@ const char *get_system_type(void);
- 
- extern unsigned long mips_machtype;
- 
-+#ifndef CONFIG_64BIT
- extern void detect_memory_region(phys_addr_t start, phys_addr_t sz_min,  phys_addr_t sz_max);
-+#endif
- 
- extern void prom_init(void);
- extern void prom_free_prom_memory(void);
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -90,21 +90,27 @@ static struct resource bss_resource = {
- unsigned long __kaslr_offset __ro_after_init;
- EXPORT_SYMBOL(__kaslr_offset);
- 
--static void *detect_magic __initdata = detect_memory_region;
--
- #ifdef CONFIG_MIPS_AUTO_PFN_OFFSET
- unsigned long ARCH_PFN_OFFSET;
- EXPORT_SYMBOL(ARCH_PFN_OFFSET);
- #endif
- 
-+#ifndef CONFIG_64BIT
-+static u32 detect_magic __initdata;
-+#define MIPS_MEM_TEST_PATTERN		0xaa5555aa
-+
- void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max)
- {
--	void *dm = &detect_magic;
-+	void *dm = (void *)KSEG1ADDR(&detect_magic);
- 	phys_addr_t size;
- 
- 	for (size = sz_min; size < sz_max; size <<= 1) {
--		if (!memcmp(dm, dm + size, sizeof(detect_magic)))
--			break;
-+		__raw_writel(MIPS_MEM_TEST_PATTERN, dm);
-+		if (__raw_readl(dm) == __raw_readl(dm + size)) {
-+			__raw_writel(~MIPS_MEM_TEST_PATTERN, dm);
-+			if (__raw_readl(dm) == __raw_readl(dm + size))
-+				break;
-+		}
- 	}
- 
- 	pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n",
-@@ -115,6 +121,7 @@ void __init detect_memory_region(phys_ad
- 
- 	memblock_add(start, size);
- }
-+#endif /* CONFIG_64BIT */
- 
- /*
-  * Manage initrd
diff --git a/target/linux/generic/pending-6.1/351-irqchip-bcm-6345-l1-request-memory-region.patch b/target/linux/generic/pending-6.1/351-irqchip-bcm-6345-l1-request-memory-region.patch
deleted file mode 100644
index 2675ca47910d..000000000000
--- a/target/linux/generic/pending-6.1/351-irqchip-bcm-6345-l1-request-memory-region.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From patchwork Thu Mar 16 19:28:33 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=
- <noltari@gmail.com>
-X-Patchwork-Id: 13178238
-Return-Path: <linux-mips-owner@vger.kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id 5EF2AC6FD19
-	for <linux-mips@archiver.kernel.org>; Thu, 16 Mar 2023 19:28:43 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S230076AbjCPT2l (ORCPT <rfc822;linux-mips@archiver.kernel.org>);
-        Thu, 16 Mar 2023 15:28:41 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56412 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S230039AbjCPT2k (ORCPT
-        <rfc822;linux-mips@vger.kernel.org>); Thu, 16 Mar 2023 15:28:40 -0400
-Received: from mail-wr1-x42f.google.com (mail-wr1-x42f.google.com
- [IPv6:2a00:1450:4864:20::42f])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7259B7D9F;
-        Thu, 16 Mar 2023 12:28:38 -0700 (PDT)
-Received: by mail-wr1-x42f.google.com with SMTP id y14so2539231wrq.4;
-        Thu, 16 Mar 2023 12:28:38 -0700 (PDT)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=gmail.com; s=20210112; t=1678994917;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:from:to:cc:subject:date
-         :message-id:reply-to;
-        bh=j8afldfRZftLeVmekmQfoh01jVdumsVP7nkKoPaU3Q0=;
-        b=FzMRr5ekh/fDiJqTlezNj6nLjzvn5z92FtYeB8MquVSMB8PuvarccnyqAzsXiccf+v
-         uwRFIomnTWNLGVjzc1xrB2hGiCKD3jBo5n1u8p/yEV6rpolbxVjfM7eTHXyAHXGXz7ZJ
-         TPeVbWfAlxiSD6+BPtXr/efehcdI64fIoL6G/U1WHNMo01Tzr/Obf3y5tug17N0fGcXg
-         CH6E5a2HguZUtwrm26LcK9IOV/7xEx5eIE1cOvTLMxPbGWaZwEjjP16HylJr06xRLhaf
-         RpiYBT3mXwwuOx0jLOhqavY/2kZ9GVbZRWMMwZrZv9xNO13SBwc1VUVgD4k3FntnSk7Z
-         AaOQ==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20210112; t=1678994917;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc
-         :subject:date:message-id:reply-to;
-        bh=j8afldfRZftLeVmekmQfoh01jVdumsVP7nkKoPaU3Q0=;
-        b=OaA5DMgqalrfqO5iOtmmxFPsH90MkN7l4EJpyVnzuiO1Wd6rSCpqPOR7xpxZno8OPP
-         tdfm4vzn9Ie4AUDbFKDTUlPG+tgkmIruo3K9C0VnY9DD2PRZMEYBbWaJKU1otqKt0NKu
-         IAAHNvxvQvCESKzbXFLYwWbRKFScOSMGmGBTDfgThz51A18Ff1hJy/BmnuZk7M2TLgHO
-         wQpy9t7oeB/Hkxl41y46emLc/nESsvwvAG/fx/zPzCe9UiaQLrdZq+BKeOwSBedktzK5
-         U/ZTfgzU2UGSI67aGRqqGnI0uXq+MAJMK18qzM0VByxj6W+AXJ6BJr5P0quljeQ8upSg
-         bEUg==
-X-Gm-Message-State: AO0yUKWnqTlccBDnqwCSRdqOBGc2FyfiLy1Tg7EjPENlISpzXuDYwW/R
-        lJSI06rrfq+Vel/SigfpGJI=
-X-Google-Smtp-Source: 
- AK7set/jYfYl9ttVzIXJO+ZQVfa6cE/yOsP8fx4teiTmGNNWyVlIJRzMAlF3IUGqRAXAmY3hAabIuQ==
-X-Received: by 2002:a5d:40ce:0:b0:2cd:ceab:df1a with SMTP id
- b14-20020a5d40ce000000b002cdceabdf1amr381006wrq.32.1678994916642;
-        Thu, 16 Mar 2023 12:28:36 -0700 (PDT)
-Received: from atlantis.lan (255.red-79-146-124.dynamicip.rima-tde.net.
- [79.146.124.255])
-        by smtp.gmail.com with ESMTPSA id
- l10-20020a5d4bca000000b002cfea3c49d5sm180041wrt.52.2023.03.16.12.28.35
-        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
-        Thu, 16 Mar 2023 12:28:35 -0700 (PDT)
-From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-To: f.fainelli@gmail.com, jonas.gorski@gmail.com,
-        bcm-kernel-feedback-list@broadcom.com, tglx@linutronix.de,
-        maz@kernel.org, linux-mips@vger.kernel.org,
-        linux-kernel@vger.kernel.org
-Cc: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-Subject: [PATCH v2] irqchip/bcm-6345-l1: request memory region
-Date: Thu, 16 Mar 2023 20:28:33 +0100
-Message-Id: <20230316192833.1603149-1-noltari@gmail.com>
-X-Mailer: git-send-email 2.30.2
-In-Reply-To: <20230316180701.783785-1-noltari@gmail.com>
-References: <20230316180701.783785-1-noltari@gmail.com>
-MIME-Version: 1.0
-Precedence: bulk
-List-ID: <linux-mips.vger.kernel.org>
-X-Mailing-List: linux-mips@vger.kernel.org
-
-Request memory region in order to display it in /proc/iomem.
-Also stop printing the MMIO address since it just displays (ptrval).
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
----
- v2: request memory region and stop displaying MMIO address.
-
- drivers/irqchip/irq-bcm6345-l1.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/irqchip/irq-bcm6345-l1.c
-+++ b/drivers/irqchip/irq-bcm6345-l1.c
-@@ -253,6 +253,9 @@ static int __init bcm6345_l1_init_one(st
- 	if (!cpu->map_base)
- 		return -ENOMEM;
- 
-+	if (!request_mem_region(res.start, sz, res.name))
-+		pr_err("failed to request intc memory");
-+
- 	for (i = 0; i < n_words; i++) {
- 		cpu->enable_cache[i] = 0;
- 		__raw_writel(0, cpu->map_base + reg_enable(intc, i));
-@@ -331,8 +334,7 @@ static int __init bcm6345_l1_of_init(str
- 	for_each_cpu(idx, &intc->cpumask) {
- 		struct bcm6345_l1_cpu *cpu = intc->cpus[idx];
- 
--		pr_info("  CPU%u at MMIO 0x%p (irq = %d)\n", idx,
--				cpu->map_base, cpu->parent_irq);
-+		pr_info("  CPU%u (irq = %d)\n", idx, cpu->parent_irq);
- 	}
- 
- 	return 0;
diff --git a/target/linux/generic/pending-6.1/400-mtd-mtdsplit-support.patch b/target/linux/generic/pending-6.1/400-mtd-mtdsplit-support.patch
deleted file mode 100644
index c619d12ce539..000000000000
--- a/target/linux/generic/pending-6.1/400-mtd-mtdsplit-support.patch
+++ /dev/null
@@ -1,328 +0,0 @@
-From 39717277d5c87bdb183cf2f258957b44ba99b4df Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 11:47:35 +0200
-Subject: [PATCH] mtd: mtdsplit support
-
----
- drivers/mtd/Kconfig            |  19 ++++
- drivers/mtd/Makefile           |   2 +
- drivers/mtd/mtdpart.c          | 169 ++++++++++++++++++++++++++++-----
- include/linux/mtd/mtd.h        |  25 +++++
- include/linux/mtd/partitions.h |   7 ++
- 5 files changed, 197 insertions(+), 25 deletions(-)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -12,6 +12,25 @@ menuconfig MTD
- 
- if MTD
- 
-+menu "OpenWrt specific MTD options"
-+
-+config MTD_ROOTFS_ROOT_DEV
-+	bool "Automatically set 'rootfs' partition to be root filesystem"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE
-+	bool "Automatically split firmware partition for kernel+rootfs"
-+	default y
-+
-+config MTD_SPLIT_FIRMWARE_NAME
-+	string "Firmware partition name"
-+	depends on MTD_SPLIT_FIRMWARE
-+	default "firmware"
-+
-+source "drivers/mtd/mtdsplit/Kconfig"
-+
-+endmenu
-+
- config MTD_TESTS
- 	tristate "MTD tests support (DANGEROUS)"
- 	depends on m
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -9,6 +9,8 @@ mtd-y				:= mtdcore.o mtdsuper.o mtdconc
- 
- obj-y				+= parsers/
- 
-+obj-$(CONFIG_MTD_SPLIT)		+= mtdsplit/
-+
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
- obj-$(CONFIG_MTD_BLOCK)		+= mtdblock.o
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -15,11 +15,13 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/magic.h>
- #include <linux/err.h>
- #include <linux/of.h>
- #include <linux/of_platform.h>
- 
- #include "mtdcore.h"
-+#include "mtdsplit/mtdsplit.h"
- 
- /*
-  * MTD methods which simply translate the effective address and pass through
-@@ -236,6 +238,147 @@ static int mtd_add_partition_attrs(struc
- 	return ret;
- }
- 
-+static DEFINE_SPINLOCK(part_parser_lock);
-+static LIST_HEAD(part_parsers);
-+
-+static struct mtd_part_parser *mtd_part_parser_get(const char *name)
-+{
-+	struct mtd_part_parser *p, *ret = NULL;
-+
-+	spin_lock(&part_parser_lock);
-+
-+	list_for_each_entry(p, &part_parsers, list)
-+		if (!strcmp(p->name, name) && try_module_get(p->owner)) {
-+			ret = p;
-+			break;
-+		}
-+
-+	spin_unlock(&part_parser_lock);
-+
-+	return ret;
-+}
-+
-+static inline void mtd_part_parser_put(const struct mtd_part_parser *p)
-+{
-+	module_put(p->owner);
-+}
-+
-+static struct mtd_part_parser *
-+get_partition_parser_by_type(enum mtd_parser_type type,
-+			     struct mtd_part_parser *start)
-+{
-+	struct mtd_part_parser *p, *ret = NULL;
-+
-+	spin_lock(&part_parser_lock);
-+
-+	p = list_prepare_entry(start, &part_parsers, list);
-+	if (start)
-+		mtd_part_parser_put(start);
-+
-+	list_for_each_entry_continue(p, &part_parsers, list) {
-+		if (p->type == type && try_module_get(p->owner)) {
-+			ret = p;
-+			break;
-+		}
-+	}
-+
-+	spin_unlock(&part_parser_lock);
-+
-+	return ret;
-+}
-+
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+					enum mtd_parser_type type,
-+					const struct mtd_partition **pparts,
-+					struct mtd_part_parser_data *data)
-+{
-+	struct mtd_part_parser *prev = NULL;
-+	int ret = 0;
-+
-+	while (1) {
-+		struct mtd_part_parser *parser;
-+
-+		parser = get_partition_parser_by_type(type, prev);
-+		if (!parser)
-+			break;
-+
-+		ret = (*parser->parse_fn)(master, pparts, data);
-+
-+		if (ret > 0) {
-+			mtd_part_parser_put(parser);
-+			printk(KERN_NOTICE
-+			       "%d %s partitions found on MTD device %s\n",
-+			       ret, parser->name, master->name);
-+			break;
-+		}
-+
-+		prev = parser;
-+	}
-+
-+	return ret;
-+}
-+
-+static int
-+run_parsers_by_type(struct mtd_info *child, enum mtd_parser_type type)
-+{
-+	struct mtd_partition *parts;
-+	int nr_parts;
-+	int i;
-+
-+	nr_parts = parse_mtd_partitions_by_type(child, type, (const struct mtd_partition **)&parts,
-+						NULL);
-+	if (nr_parts <= 0)
-+		return nr_parts;
-+
-+	if (WARN_ON(!parts))
-+		return 0;
-+
-+	for (i = 0; i < nr_parts; i++) {
-+		/* adjust partition offsets */
-+		parts[i].offset += child->part.offset;
-+
-+		mtd_add_partition(child->parent,
-+				  parts[i].name,
-+				  parts[i].offset,
-+				  parts[i].size);
-+	}
-+
-+	kfree(parts);
-+
-+	return nr_parts;
-+}
-+
-+#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#else
-+#define SPLIT_FIRMWARE_NAME	"unused"
-+#endif
-+
-+static void split_firmware(struct mtd_info *master, struct mtd_info *part)
-+{
-+	run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
-+}
-+
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_info *part)
-+{
-+	static int rootfs_found = 0;
-+
-+	if (rootfs_found)
-+		return;
-+
-+	if (of_find_property(mtd_get_of_node(part), "linux,rootfs", NULL) ||
-+	    !strcmp(part->name, "rootfs")) {
-+		run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
-+
-+		rootfs_found = 1;
-+	}
-+
-+	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
-+	    !strcmp(part->name, SPLIT_FIRMWARE_NAME) &&
-+	    !of_find_property(mtd_get_of_node(part), "compatible", NULL))
-+		split_firmware(master, part);
-+}
-+
- int mtd_add_partition(struct mtd_info *parent, const char *name,
- 		      long long offset, long long length)
- {
-@@ -274,6 +417,7 @@ int mtd_add_partition(struct mtd_info *p
- 	if (ret)
- 		goto err_remove_part;
- 
-+	mtd_partition_split(parent, child);
- 	mtd_add_partition_attrs(child);
- 
- 	return 0;
-@@ -422,6 +566,7 @@ int add_mtd_partitions(struct mtd_info *
- 			goto err_del_partitions;
- 		}
- 
-+		mtd_partition_split(master, child);
- 		mtd_add_partition_attrs(child);
- 
- 		/* Look for subpartitions */
-@@ -438,31 +583,6 @@ err_del_partitions:
- 	return ret;
- }
- 
--static DEFINE_SPINLOCK(part_parser_lock);
--static LIST_HEAD(part_parsers);
--
--static struct mtd_part_parser *mtd_part_parser_get(const char *name)
--{
--	struct mtd_part_parser *p, *ret = NULL;
--
--	spin_lock(&part_parser_lock);
--
--	list_for_each_entry(p, &part_parsers, list)
--		if (!strcmp(p->name, name) && try_module_get(p->owner)) {
--			ret = p;
--			break;
--		}
--
--	spin_unlock(&part_parser_lock);
--
--	return ret;
--}
--
--static inline void mtd_part_parser_put(const struct mtd_part_parser *p)
--{
--	module_put(p->owner);
--}
--
- /*
-  * Many partition parsers just expected the core to kfree() all their data in
-  * one chunk. Do that by default.
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -615,6 +615,24 @@ static inline void mtd_align_erase_req(s
- 		req->len += mtd->erasesize - mod;
- }
- 
-+static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round up to next erase block */
-+	return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
-+}
-+
-+static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+	if (mtd_mod_by_eb(sz, mtd) == 0)
-+		return sz;
-+
-+	/* Round down to the start of the current erase block */
-+	return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
-+}
-+
- static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
- {
- 	if (mtd->writesize_shift)
-@@ -688,6 +706,13 @@ extern struct mtd_info *of_get_mtd_devic
- extern struct mtd_info *get_mtd_device_nm(const char *name);
- extern void put_mtd_device(struct mtd_info *mtd);
- 
-+static inline uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
-+{
-+	if (!mtd_is_partition(mtd))
-+		return 0;
-+
-+	return mtd->part.offset;
-+}
- 
- struct mtd_notifier {
- 	void (*add)(struct mtd_info *mtd);
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -75,6 +75,12 @@ struct mtd_part_parser_data {
-  * Functions dealing with the various ways of partitioning the space
-  */
- 
-+enum mtd_parser_type {
-+	MTD_PARSER_TYPE_DEVICE = 0,
-+	MTD_PARSER_TYPE_ROOTFS,
-+	MTD_PARSER_TYPE_FIRMWARE,
-+};
-+
- struct mtd_part_parser {
- 	struct list_head list;
- 	struct module *owner;
-@@ -83,6 +89,7 @@ struct mtd_part_parser {
- 	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
- 			struct mtd_part_parser_data *);
- 	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
-+	enum mtd_parser_type type;
- };
- 
- /* Container for passing around a set of parsed partitions */
diff --git a/target/linux/generic/pending-6.1/401-mtd-don-t-register-NVMEM-devices-for-partitions-with.patch b/target/linux/generic/pending-6.1/401-mtd-don-t-register-NVMEM-devices-for-partitions-with.patch
deleted file mode 100644
index 42b5a564b15e..000000000000
--- a/target/linux/generic/pending-6.1/401-mtd-don-t-register-NVMEM-devices-for-partitions-with.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 31 Oct 2023 15:51:01 +0100
-Subject: [PATCH] mtd: don't register NVMEM devices for partitions with custom
- drivers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes issue exposed by upstream commit f4cf4e5db331 ("Revert
-"nvmem: add new config option"").
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/mtdcore.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -519,6 +519,29 @@ static int mtd_nvmem_add(struct mtd_info
- 	struct device_node *node = mtd_get_of_node(mtd);
- 	struct nvmem_config config = {};
- 
-+	/*
-+	 * Do NOT register NVMEM device for any partition that is meant to be
-+	 * handled by a U-Boot env driver. That would result in associating two
-+	 * different NVMEM devices with the same OF node.
-+	 *
-+	 * An example of unwanted behaviour of above (forwardtrace):
-+	 * of_get_mac_addr_nvmem()
-+	 * of_nvmem_cell_get()
-+	 * __nvmem_device_get()
-+	 *
-+	 * We can't have __nvmem_device_get() return "mtdX" NVMEM device instead
-+	 * of U-Boot env NVMEM device. That would result in failing to find
-+	 * NVMEM cell.
-+	 *
-+	 * This issue seems to affect U-Boot env case only and will go away with
-+	 * switch to NVMEM layouts.
-+	 */
-+	if (of_device_is_compatible(node, "u-boot,env") ||
-+	    of_device_is_compatible(node, "u-boot,env-redundant-bool") ||
-+	    of_device_is_compatible(node, "u-boot,env-redundant-count") ||
-+	    of_device_is_compatible(node, "brcm,env"))
-+		return 0;
-+
- 	config.id = -1;
- 	config.dev = &mtd->dev;
- 	config.name = dev_name(&mtd->dev);
diff --git a/target/linux/generic/pending-6.1/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch b/target/linux/generic/pending-6.1/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch
deleted file mode 100644
index 66a6feff6065..000000000000
--- a/target/linux/generic/pending-6.1/402-mtd-spi-nor-write-support-for-minor-aligned-partitions.patch
+++ /dev/null
@@ -1,245 +0,0 @@
-From acacdac272927ae1d96e0bca51eb82899671eaea Mon Sep 17 00:00:00 2001
-From: John Thomson <git@johnthomson.fastmail.com.au>
-Date: Fri, 25 Dec 2020 18:50:08 +1000
-Subject: [PATCH] mtd: spi-nor: write support for minor aligned partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Do not prevent writing to mtd partitions where a partition boundary sits
-on a minor erasesize boundary.
-This addresses a FIXME that has been present since the start of the
-linux git history:
-/* Doesn't start on a boundary of major erase size */
-/* FIXME: Let it be writable if it is on a boundary of
- * _minor_ erase size though */
-
-Allow a uniform erase region spi-nor device to be configured
-to use the non-uniform erase regions code path for an erase with:
-CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE=y
-
-On supporting hardware (SECT_4K: majority of current SPI-NOR device)
-provide the facility for an erase to use the least number
-of SPI-NOR operations, as well as access to 4K erase without
-requiring CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
-
-Introduce erasesize_minor to the mtd struct,
-the smallest erasesize supported by the device
-
-On existing devices, this is useful where write support is wanted
-for data on a 4K partition, such as some u-boot-env partitions,
-or RouterBoot soft_config, while still netting the performance
-benefits of using 64K sectors
-
-Performance:
-time mtd erase firmware
-OpenWrt 5.10 ramips MT7621 w25q128jv 0xfc0000 partition length
-
-Without this patch
-MTD_SPI_NOR_USE_4K_SECTORS=y	|n
-real    2m 11.66s		|0m 50.86s
-user    0m 0.00s		|0m 0.00s
-sys     1m 56.20s		|0m 50.80s
-
-With this patch
-MTD_SPI_NOR_USE_VARIABLE_ERASE=n|y		|4K_SECTORS=y
-real    0m 51.68s		|0m 50.85s	|2m 12.89s
-user    0m 0.00s		|0m 0.00s	|0m 0.01s
-sys     0m 46.94s		|0m 50.38s	|2m 12.46s
-
-Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
-Signed-off-by: Thibaut VARÈNE <hacks+kernel@slashdirt.org>
-
----
-
-checkpatch does not like the printk(KERN_WARNING
-these should be changed separately beforehand?
-
-Changes v1 -> v2:
-Added mtdcore sysfs for erasesize_minor
-Removed finding minor erasesize for variable erase regions device,
-as untested and no responses regarding it.
-Moved IF_ENABLED for SPINOR variable erase to guard setting
-erasesize_minor in spi-nor/core.c
-Removed setting erasesize to minor where partition boundaries require
-minor erase to be writable
-Simplified minor boundary check by relying on minor being a factor of
-major
-
-Changes RFC -> v1:
-Fix uninitialized variable smatch warning
-Reported-by: kernel test robot <lkp@intel.com>
-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
----
- drivers/mtd/mtdcore.c       | 10 ++++++++++
- drivers/mtd/mtdpart.c       | 35 +++++++++++++++++++++++++----------
- drivers/mtd/spi-nor/Kconfig | 10 ++++++++++
- drivers/mtd/spi-nor/core.c  | 11 +++++++++--
- include/linux/mtd/mtd.h     |  2 ++
- 5 files changed, 56 insertions(+), 12 deletions(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -169,6 +169,15 @@ static ssize_t mtd_erasesize_show(struct
- }
- MTD_DEVICE_ATTR_RO(erasesize);
- 
-+static ssize_t mtd_erasesize_minor_show(struct device *dev,
-+		struct device_attribute *attr, char *buf)
-+{
-+	struct mtd_info *mtd = dev_get_drvdata(dev);
-+
-+	return sysfs_emit(buf, "%lu\n", (unsigned long)mtd->erasesize_minor);
-+}
-+MTD_DEVICE_ATTR_RO(erasesize_minor);
-+
- static ssize_t mtd_writesize_show(struct device *dev,
- 		struct device_attribute *attr, char *buf)
- {
-@@ -314,6 +323,7 @@ static struct attribute *mtd_attrs[] = {
- 	&dev_attr_flags.attr,
- 	&dev_attr_size.attr,
- 	&dev_attr_erasesize.attr,
-+	&dev_attr_erasesize_minor.attr,
- 	&dev_attr_writesize.attr,
- 	&dev_attr_subpagesize.attr,
- 	&dev_attr_oobsize.attr,
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -41,6 +41,7 @@ static struct mtd_info *allocate_partiti
- 	struct mtd_info *master = mtd_get_master(parent);
- 	int wr_alignment = (parent->flags & MTD_NO_ERASE) ?
- 			   master->writesize : master->erasesize;
-+	int wr_alignment_minor = 0;
- 	u64 parent_size = mtd_is_partition(parent) ?
- 			  parent->part.size : parent->size;
- 	struct mtd_info *child;
-@@ -165,6 +166,7 @@ static struct mtd_info *allocate_partiti
- 	} else {
- 		/* Single erase size */
- 		child->erasesize = master->erasesize;
-+		child->erasesize_minor = master->erasesize_minor;
- 	}
- 
- 	/*
-@@ -172,26 +174,39 @@ static struct mtd_info *allocate_partiti
- 	 * exposes several regions with different erasesize. Adjust
- 	 * wr_alignment accordingly.
- 	 */
--	if (!(child->flags & MTD_NO_ERASE))
-+	if (!(child->flags & MTD_NO_ERASE)) {
- 		wr_alignment = child->erasesize;
-+		wr_alignment_minor = child->erasesize_minor;
-+	}
- 
- 	tmp = mtd_get_master_ofs(child, 0);
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((child->flags & MTD_WRITEABLE) && remainder) {
--		/* Doesn't start on a boundary of major erase size */
--		/* FIXME: Let it be writable if it is on a boundary of
--		 * _minor_ erase size though */
--		child->flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
--			part->name);
-+		if (wr_alignment_minor) {
-+			/* rely on minor being a factor of major erasesize */
-+			tmp = remainder;
-+			remainder = do_div(tmp, wr_alignment_minor);
-+		}
-+		if (remainder) {
-+			child->flags &= ~MTD_WRITEABLE;
-+			printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
-+				part->name);
-+		}
- 	}
- 
- 	tmp = mtd_get_master_ofs(child, 0) + child->part.size;
- 	remainder = do_div(tmp, wr_alignment);
- 	if ((child->flags & MTD_WRITEABLE) && remainder) {
--		child->flags &= ~MTD_WRITEABLE;
--		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
--			part->name);
-+		if (wr_alignment_minor) {
-+			tmp = remainder;
-+			remainder = do_div(tmp, wr_alignment_minor);
-+		}
-+
-+		if (remainder) {
-+			child->flags &= ~MTD_WRITEABLE;
-+			printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
-+				part->name);
-+		}
- 	}
- 
- 	child->size = child->part.size;
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -10,6 +10,16 @@ menuconfig MTD_SPI_NOR
- 
- if MTD_SPI_NOR
- 
-+config MTD_SPI_NOR_USE_VARIABLE_ERASE
-+	bool "Disable uniform_erase to allow use of all hardware supported erasesizes"
-+	depends on !MTD_SPI_NOR_USE_4K_SECTORS
-+	default n
-+	help
-+	  Allow mixed use of all hardware supported erasesizes,
-+	  by forcing spi_nor to use the multiple eraseregions code path.
-+	  For example: A 68K erase will use one 64K erase, and one 4K erase
-+	  on supporting hardware.
-+
- config MTD_SPI_NOR_USE_4K_SECTORS
- 	bool "Use small 4096 B erase sectors"
- 	default y
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -1050,6 +1050,8 @@ static u8 spi_nor_convert_3to4_erase(u8
- 
- static bool spi_nor_has_uniform_erase(const struct spi_nor *nor)
- {
-+	if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE))
-+		return false;
- 	return !!nor->params->erase_map.uniform_erase_type;
- }
- 
-@@ -2180,6 +2182,7 @@ static int spi_nor_select_erase(struct s
- {
- 	struct spi_nor_erase_map *map = &nor->params->erase_map;
- 	const struct spi_nor_erase_type *erase = NULL;
-+	const struct spi_nor_erase_type *erase_minor = NULL;
- 	struct mtd_info *mtd = &nor->mtd;
- 	u32 wanted_size = nor->info->sector_size;
- 	int i;
-@@ -2212,8 +2215,9 @@ static int spi_nor_select_erase(struct s
- 	 */
- 	for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
- 		if (map->erase_type[i].size) {
--			erase = &map->erase_type[i];
--			break;
-+			if (!erase)
-+				erase = &map->erase_type[i];
-+			erase_minor = &map->erase_type[i];
- 		}
- 	}
- 
-@@ -2221,6 +2225,9 @@ static int spi_nor_select_erase(struct s
- 		return -EINVAL;
- 
- 	mtd->erasesize = erase->size;
-+	if (IS_ENABLED(CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE) &&
-+			erase_minor && erase_minor->size < erase->size)
-+		mtd->erasesize_minor = erase_minor->size;
- 	return 0;
- }
- 
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -245,6 +245,8 @@ struct mtd_info {
- 	 * information below if they desire
- 	 */
- 	uint32_t erasesize;
-+	/* "Minor" (smallest) erase size supported by the whole device */
-+	uint32_t erasesize_minor;
- 	/* Minimal writable flash unit size. In case of NOR flash it is 1 (even
- 	 * though individual bits can be cleared), in case of NAND flash it is
- 	 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
diff --git a/target/linux/generic/pending-6.1/420-mtd-redboot_space.patch b/target/linux/generic/pending-6.1/420-mtd-redboot_space.patch
deleted file mode 100644
index 5518ea71dd51..000000000000
--- a/target/linux/generic/pending-6.1/420-mtd-redboot_space.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: add patch for including unpartitioned space in the rootfs partition for redboot devices (if applicable)
-
-[john@phrozen.org: used by ixp and others]
-
-lede-commit: 394918851f84e4d00fa16eb900e7700e95091f00
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/redboot.c | 19 +++++++++++++------
- 1 file changed, 13 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/parsers/redboot.c
-+++ b/drivers/mtd/parsers/redboot.c
-@@ -278,14 +278,21 @@ nogood:
- #endif
- 		names += strlen(names) + 1;
- 
--#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- 		if (fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
--			i++;
--			parts[i].offset = parts[i - 1].size + parts[i - 1].offset;
--			parts[i].size = fl->next->img->flash_base - parts[i].offset;
--			parts[i].name = nullname;
--		}
-+			if (!strcmp(parts[i].name, "rootfs")) {
-+				parts[i].size = fl->next->img->flash_base;
-+				parts[i].size &= ~(master->erasesize - 1);
-+				parts[i].size -= parts[i].offset;
-+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-+				nrparts--;
-+			} else {
-+				i++;
-+				parts[i].offset = parts[i-1].size + parts[i-1].offset;
-+				parts[i].size = fl->next->img->flash_base - parts[i].offset;
-+				parts[i].name = nullname;
- #endif
-+			}
-+		}
- 		tmp_fl = fl;
- 		fl = fl->next;
- 		kfree(tmp_fl);
diff --git a/target/linux/generic/pending-6.1/430-mtd-add-myloader-partition-parser.patch b/target/linux/generic/pending-6.1/430-mtd-add-myloader-partition-parser.patch
deleted file mode 100644
index 35e80d6dcc95..000000000000
--- a/target/linux/generic/pending-6.1/430-mtd-add-myloader-partition-parser.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: Add myloader partition table parser
-
-[john@phozen.org: shoud be upstreamable]
-
-lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-[adjust for kernel 5.4, add myloader.c to patch]
-Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -67,6 +67,22 @@ config MTD_CMDLINE_PARTS
- 
- 	  If unsure, say 'N'.
- 
-+config MTD_MYLOADER_PARTS
-+	tristate "MyLoader partition parsing"
-+	depends on ADM5120 || ATH79
-+	help
-+	  MyLoader is a bootloader which allows the user to define partitions
-+	  in flash devices, by putting a table in the second erase block
-+	  on the device, similar to a partition table. This table gives the
-+	  offsets and lengths of the user defined partitions.
-+
-+	  If you need code which can detect and parse these tables, and
-+	  register MTD 'partitions' corresponding to each image detected,
-+	  enable this option.
-+
-+	  You will still need the parsing functions to be called by the driver
-+	  for your particular device. It won't happen automatically.
-+
- config MTD_OF_PARTS
- 	tristate "OpenFirmware (device tree) partitioning parser"
- 	default y
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -4,6 +4,7 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS)		+= bcm4
- obj-$(CONFIG_MTD_BCM63XX_PARTS)		+= bcm63xxpart.o
- obj-$(CONFIG_MTD_BRCM_U_BOOT)		+= brcm_u-boot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS)		+= cmdlinepart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS)		+= myloader.o
- obj-$(CONFIG_MTD_OF_PARTS)		+= ofpart.o
- ofpart-y				+= ofpart_core.o
- ofpart-$(CONFIG_MTD_OF_PARTS_BCM4908)	+= ofpart_bcm4908.o
---- /dev/null
-+++ b/drivers/mtd/parsers/myloader.c
-@@ -0,0 +1,181 @@
-+/*
-+ *  Parse MyLoader-style flash partition tables and produce a Linux partition
-+ *  array to match.
-+ *
-+ *  Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This file was based on drivers/mtd/redboot.c
-+ *  Author: Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/byteorder/generic.h>
-+#include <linux/myloader.h>
-+
-+#define BLOCK_LEN_MIN		0x10000
-+#define PART_NAME_LEN		32
-+
-+struct part_data {
-+	struct mylo_partition_table	tab;
-+	char names[MYLO_MAX_PARTITIONS][PART_NAME_LEN];
-+};
-+
-+static int myloader_parse_partitions(struct mtd_info *master,
-+				     const struct mtd_partition **pparts,
-+				     struct mtd_part_parser_data *data)
-+{
-+	struct part_data *buf;
-+	struct mylo_partition_table *tab;
-+	struct mylo_partition *part;
-+	struct mtd_partition *mtd_parts;
-+	struct mtd_partition *mtd_part;
-+	int num_parts;
-+	int ret, i;
-+	size_t retlen;
-+	char *names;
-+	unsigned long offset;
-+	unsigned long blocklen;
-+
-+	buf = vmalloc(sizeof(*buf));
-+	if (!buf) {
-+		return -ENOMEM;
-+		goto out;
-+	}
-+	tab = &buf->tab;
-+
-+	blocklen = master->erasesize;
-+	if (blocklen < BLOCK_LEN_MIN)
-+		blocklen = BLOCK_LEN_MIN;
-+
-+	offset = blocklen;
-+
-+	/* Find the partition table */
-+	for (i = 0; i < 4; i++, offset += blocklen) {
-+		printk(KERN_DEBUG "%s: searching for MyLoader partition table"
-+				" at offset 0x%lx\n", master->name, offset);
-+
-+		ret = mtd_read(master, offset, sizeof(*buf), &retlen,
-+			       (void *)buf);
-+		if (ret)
-+			goto out_free_buf;
-+
-+		if (retlen != sizeof(*buf)) {
-+			ret = -EIO;
-+			goto out_free_buf;
-+		}
-+
-+		/* Check for Partition Table magic number */
-+		if (tab->magic == le32_to_cpu(MYLO_MAGIC_PARTITIONS))
-+			break;
-+
-+	}
-+
-+	if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
-+		printk(KERN_DEBUG "%s: no MyLoader partition table found\n",
-+			master->name);
-+		ret = 0;
-+		goto out_free_buf;
-+	}
-+
-+	/* The MyLoader and the Partition Table is always present */
-+	num_parts = 2;
-+
-+	/* Detect number of used partitions */
-+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-+		part = &tab->partitions[i];
-+
-+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-+			continue;
-+
-+		num_parts++;
-+	}
-+
-+	mtd_parts = kzalloc((num_parts * sizeof(*mtd_part) +
-+				num_parts * PART_NAME_LEN), GFP_KERNEL);
-+
-+	if (!mtd_parts) {
-+		ret = -ENOMEM;
-+		goto out_free_buf;
-+	}
-+
-+	mtd_part = mtd_parts;
-+	names = (char *)&mtd_parts[num_parts];
-+
-+	strncpy(names, "myloader", PART_NAME_LEN);
-+	mtd_part->name = names;
-+	mtd_part->offset = 0;
-+	mtd_part->size = offset;
-+	mtd_part->mask_flags = MTD_WRITEABLE;
-+	mtd_part++;
-+	names += PART_NAME_LEN;
-+
-+	strncpy(names, "partition_table", PART_NAME_LEN);
-+	mtd_part->name = names;
-+	mtd_part->offset = offset;
-+	mtd_part->size = blocklen;
-+	mtd_part->mask_flags = MTD_WRITEABLE;
-+	mtd_part++;
-+	names += PART_NAME_LEN;
-+
-+	for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-+		part = &tab->partitions[i];
-+
-+		if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-+			continue;
-+
-+		if ((buf->names[i][0]) && (buf->names[i][0] != '\xff'))
-+			strncpy(names, buf->names[i], PART_NAME_LEN);
-+		else
-+			snprintf(names, PART_NAME_LEN, "partition%d", i);
-+
-+		mtd_part->offset = le32_to_cpu(part->addr);
-+		mtd_part->size = le32_to_cpu(part->size);
-+		mtd_part->name = names;
-+		mtd_part++;
-+		names += PART_NAME_LEN;
-+	}
-+
-+	*pparts = mtd_parts;
-+	ret = num_parts;
-+
-+ out_free_buf:
-+	vfree(buf);
-+ out:
-+	return ret;
-+}
-+
-+static struct mtd_part_parser myloader_mtd_parser = {
-+	.owner		= THIS_MODULE,
-+	.parse_fn	= myloader_parse_partitions,
-+	.name		= "MyLoader",
-+};
-+
-+static int __init myloader_mtd_parser_init(void)
-+{
-+	register_mtd_parser(&myloader_mtd_parser);
-+
-+	return 0;
-+}
-+
-+static void __exit myloader_mtd_parser_exit(void)
-+{
-+	deregister_mtd_parser(&myloader_mtd_parser);
-+}
-+
-+module_init(myloader_mtd_parser_init);
-+module_exit(myloader_mtd_parser_exit);
-+
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_DESCRIPTION("Parsing code for MyLoader partition tables");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic/pending-6.1/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch b/target/linux/generic/pending-6.1/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
deleted file mode 100644
index bcea45d009bb..000000000000
--- a/target/linux/generic/pending-6.1/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating offsets
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -25,6 +25,33 @@ struct trx_header {
- 	uint32_t offset[3];
- } __packed;
- 
-+/*
-+ * Calculate real end offset (address) for a given amount of data. It checks
-+ * all blocks skipping bad ones.
-+ */
-+static size_t parser_trx_real_offset(struct mtd_info *mtd, size_t bytes)
-+{
-+	size_t real_offset = 0;
-+
-+	if (mtd_block_isbad(mtd, real_offset))
-+		pr_warn("Base offset shouldn't be at bad block");
-+
-+	while (bytes >= mtd->erasesize) {
-+		bytes -= mtd->erasesize;
-+		real_offset += mtd->erasesize;
-+		while (mtd_block_isbad(mtd, real_offset)) {
-+			real_offset += mtd->erasesize;
-+
-+			if (real_offset >= mtd->size)
-+				return real_offset - mtd->erasesize;
-+		}
-+	}
-+
-+	real_offset += bytes;
-+
-+	return real_offset;
-+}
-+
- static const char *parser_trx_data_part_name(struct mtd_info *master,
- 					     size_t offset)
- {
-@@ -86,21 +113,21 @@ static int parser_trx_parse(struct mtd_i
- 	if (trx.offset[2]) {
- 		part = &parts[curr_part++];
- 		part->name = "loader";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
- 		part->name = "linux";
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- 		i++;
- 	}
- 
- 	if (trx.offset[i]) {
- 		part = &parts[curr_part++];
--		part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
--		part->offset = trx.offset[i];
-+		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
-+		part->name = parser_trx_data_part_name(mtd, part->offset);
- 		i++;
- 	}
- 
diff --git a/target/linux/generic/pending-6.1/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch b/target/linux/generic/pending-6.1/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
deleted file mode 100644
index 852654d924a8..000000000000
--- a/target/linux/generic/pending-6.1/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: mtd: bcm47xxpart: detect T_Meter partition
-
-It can be found on many Netgear devices. It consists of many 0x30 blocks
-starting with 4D 54.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/parsers/bcm47xxpart.c
-+++ b/drivers/mtd/parsers/bcm47xxpart.c
-@@ -35,6 +35,7 @@
- #define NVRAM_HEADER			0x48534C46	/* FLSH */
- #define POT_MAGIC1			0x54544f50	/* POTT */
- #define POT_MAGIC2			0x504f		/* OP */
-+#define T_METER_MAGIC			0x4D540000	/* MT */
- #define ML_MAGIC1			0x39685a42
- #define ML_MAGIC2			0x26594131
- #define TRX_MAGIC			0x30524448
-@@ -178,6 +179,15 @@ static int bcm47xxpart_parse(struct mtd_
- 					     MTD_WRITEABLE);
- 			continue;
- 		}
-+
-+		/* T_Meter */
-+		if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+		    (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
-+			bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
-+					     MTD_WRITEABLE);
-+			continue;
-+		}
- 
- 		/* TRX */
- 		if (buf[0x000 / 4] == TRX_MAGIC) {
diff --git a/target/linux/generic/pending-6.1/435-mtd-add-routerbootpart-parser-config.patch b/target/linux/generic/pending-6.1/435-mtd-add-routerbootpart-parser-config.patch
deleted file mode 100644
index a42dcc868f7b..000000000000
--- a/target/linux/generic/pending-6.1/435-mtd-add-routerbootpart-parser-config.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4437e01fb6bca63fccdba5d6c44888b0935885c2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= <hacks@slashdirt.org>
-Date: Tue, 24 Mar 2020 11:45:07 +0100
-Subject: [PATCH] generic: routerboot partition build bits (5.4)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds routerbootpart kernel build bits
-
-Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
----
- drivers/mtd/parsers/Kconfig  | 9 +++++++++
- drivers/mtd/parsers/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -236,3 +236,12 @@ config MTD_SERCOMM_PARTS
- 	  partition map. This partition table contains real partition
- 	  offsets, which may differ from device to device depending on the
- 	  number and location of bad blocks on NAND.
-+
-+config MTD_ROUTERBOOT_PARTS
-+	tristate "RouterBoot flash partition parser"
-+	depends on MTD && OF
-+	help
-+	 MikroTik RouterBoot is implemented as a multi segment system on the
-+	 flash, some of which are fixed and some of which are located at
-+	 variable offsets. This parser handles both cases via properly
-+	 formatted DTS.
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_SERCOMM_PARTS)		+= scpa
- obj-$(CONFIG_MTD_SHARPSL_PARTS)		+= sharpslpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS)		+= redboot.o
- obj-$(CONFIG_MTD_QCOMSMEM_PARTS)	+= qcomsmempart.o
-+obj-$(CONFIG_MTD_ROUTERBOOT_PARTS)		+= routerbootpart.o
diff --git a/target/linux/generic/pending-6.1/450-01-dt-bindings-mtd-add-basic-bindings-for-UBI.patch b/target/linux/generic/pending-6.1/450-01-dt-bindings-mtd-add-basic-bindings-for-UBI.patch
deleted file mode 100644
index 063d3fa79c99..000000000000
--- a/target/linux/generic/pending-6.1/450-01-dt-bindings-mtd-add-basic-bindings-for-UBI.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From ffbbe7d66872ff8957dad2136133e28a1fd5d437 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 7 Aug 2023 22:51:05 +0100
-Subject: [PATCH 01/15] dt-bindings: mtd: add basic bindings for UBI
-
-Add basic bindings for UBI devices and volumes.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- .../bindings/mtd/partitions/linux,ubi.yaml    | 65 +++++++++++++++++++
- .../bindings/mtd/partitions/ubi-volume.yaml   | 35 ++++++++++
- 2 files changed, 100 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml
-@@ -0,0 +1,65 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/linux,ubi.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Unsorted Block Images
-+
-+description: |
-+  UBI ("Unsorted Block Images") is a volume management system for raw
-+  flash devices which manages multiple logical volumes on a single
-+  physical flash device and spreads the I/O load (i.e wear-leveling)
-+  across the whole flash chip.
-+
-+maintainers:
-+  - Daniel Golle <daniel@makrotopia.org>
-+
-+allOf:
-+  - $ref: partition.yaml#
-+
-+properties:
-+  compatible:
-+    const: linux,ubi
-+
-+  volumes:
-+    type: object
-+    description: UBI Volumes
-+
-+    patternProperties:
-+      "^ubi-volume-.*$":
-+        $ref: /schemas/mtd/partitions/ubi-volume.yaml#
-+
-+    unevaluatedProperties: false
-+
-+required:
-+  - compatible
-+
-+unevaluatedProperties: false
-+
-+examples:
-+  - |
-+    partitions {
-+        compatible = "fixed-partitions";
-+        #address-cells = <1>;
-+        #size-cells = <1>;
-+
-+        partition@0 {
-+            reg = <0x0 0x100000>;
-+            label = "bootloader";
-+            read-only;
-+        };
-+
-+        partition@100000 {
-+            reg = <0x100000 0x1ff00000>;
-+            label = "ubi";
-+            compatible = "linux,ubi";
-+
-+            volumes {
-+                ubi-volume-caldata {
-+                    volid = <2>;
-+                    volname = "rf";
-+                };
-+            };
-+        };
-+    };
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml
-@@ -0,0 +1,35 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/mtd/partitions/ubi-volume.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: UBI volume
-+
-+description: |
-+  This binding describes a single UBI volume. Volumes can be matches either
-+  by their ID or their name, or both.
-+
-+maintainers:
-+  - Daniel Golle <daniel@makrotopia.org>
-+
-+properties:
-+  volid:
-+    $ref: "/schemas/types.yaml#/definitions/uint32"
-+    description:
-+      Match UBI volume ID
-+
-+  volname:
-+    $ref: "/schemas/types.yaml#/definitions/string"
-+    description:
-+      Match UBI volume ID
-+
-+anyOf:
-+  - required:
-+    - volid
-+
-+  - required:
-+    - volname
-+
-+# This is a generic file other binding inherit from and extend
-+additionalProperties: true
diff --git a/target/linux/generic/pending-6.1/450-02-dt-bindings-mtd-ubi-volume-allow-UBI-volumes-to-prov.patch b/target/linux/generic/pending-6.1/450-02-dt-bindings-mtd-ubi-volume-allow-UBI-volumes-to-prov.patch
deleted file mode 100644
index 823c8e83b715..000000000000
--- a/target/linux/generic/pending-6.1/450-02-dt-bindings-mtd-ubi-volume-allow-UBI-volumes-to-prov.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From e4dad3aa5c3ab9c553555dd23c0b85f725f2eb51 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 7 Aug 2023 22:53:01 +0100
-Subject: [PATCH 02/15] dt-bindings: mtd: ubi-volume: allow UBI volumes to
- provide NVMEM
-
-UBI volumes may be used to contain NVMEM bits, typically device MAC
-addresses or wireless radio calibration data.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- .../devicetree/bindings/mtd/partitions/linux,ubi.yaml  | 10 ++++++++++
- .../devicetree/bindings/mtd/partitions/ubi-volume.yaml |  5 +++++
- 2 files changed, 15 insertions(+)
-
---- a/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml
-+++ b/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml
-@@ -59,6 +59,16 @@ examples:
-                 ubi-volume-caldata {
-                     volid = <2>;
-                     volname = "rf";
-+
-+                    nvmem-layout {
-+                        compatible = "fixed-layout";
-+                        #address-cells = <1>;
-+                        #size-cells = <1>;
-+
-+                        eeprom@0 {
-+                            reg = <0x0 0x1000>;
-+                        };
-+                    };
-                 };
-             };
-         };
---- a/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml
-+++ b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml
-@@ -24,6 +24,11 @@ properties:
-     description:
-       Match UBI volume ID
- 
-+  nvmem-layout:
-+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml#
-+    description:
-+      This container may reference an NVMEM layout parser.
-+
- anyOf:
-   - required:
-     - volid
diff --git a/target/linux/generic/pending-6.1/450-03-mtd-ubi-block-use-notifier-to-create-ubiblock-from-p.patch b/target/linux/generic/pending-6.1/450-03-mtd-ubi-block-use-notifier-to-create-ubiblock-from-p.patch
deleted file mode 100644
index eda3b108da3d..000000000000
--- a/target/linux/generic/pending-6.1/450-03-mtd-ubi-block-use-notifier-to-create-ubiblock-from-p.patch
+++ /dev/null
@@ -1,225 +0,0 @@
-From e5cf19bd8204925f3bd2067df9e867313eac388b Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 1 May 2023 11:57:51 +0100
-Subject: [PATCH 03/15] mtd: ubi: block: use notifier to create ubiblock from
- parameter
-
-Use UBI_VOLUME_ADDED notification to create ubiblock device specified
-on kernel cmdline or module parameter.
-This makes thing more simple and has the advantage that ubiblock devices
-on volumes which are not present at the time the ubi module is probed
-will still be created.
-
-Suggested-by: Zhihao Cheng <chengzhihao1@huawei.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 154 ++++++++++++++++++++++------------------
- 1 file changed, 85 insertions(+), 69 deletions(-)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -33,6 +33,7 @@
- #include <linux/kernel.h>
- #include <linux/list.h>
- #include <linux/mutex.h>
-+#include <linux/namei.h>
- #include <linux/slab.h>
- #include <linux/mtd/ubi.h>
- #include <linux/workqueue.h>
-@@ -67,10 +68,10 @@ struct ubiblock_pdu {
- };
- 
- /* Numbers of elements set in the @ubiblock_param array */
--static int ubiblock_devs __initdata;
-+static int ubiblock_devs;
- 
- /* MTD devices specification parameters */
--static struct ubiblock_param ubiblock_param[UBIBLOCK_MAX_DEVICES] __initdata;
-+static struct ubiblock_param ubiblock_param[UBIBLOCK_MAX_DEVICES];
- 
- struct ubiblock {
- 	struct ubi_volume_desc *desc;
-@@ -504,7 +505,7 @@ int ubiblock_remove(struct ubi_volume_in
- 	}
- 
- 	/* Found a device, let's lock it so we can check if it's busy */
--	mutex_lock(&dev->dev_mutex);
-+	mutex_lock_nested(&dev->dev_mutex, SINGLE_DEPTH_NESTING);
- 	if (dev->refcnt > 0) {
- 		ret = -EBUSY;
- 		goto out_unlock_dev;
-@@ -567,6 +568,85 @@ static int ubiblock_resize(struct ubi_vo
- 	return 0;
- }
- 
-+static bool
-+match_volume_desc(struct ubi_volume_info *vi, const char *name, int ubi_num, int vol_id)
-+{
-+	int err, len;
-+	struct path path;
-+	struct kstat stat;
-+
-+	if (ubi_num == -1) {
-+		/* No ubi num, name must be a vol device path */
-+		err = kern_path(name, LOOKUP_FOLLOW, &path);
-+		if (err)
-+			return false;
-+
-+		err = vfs_getattr(&path, &stat, STATX_TYPE, AT_STATX_SYNC_AS_STAT);
-+		path_put(&path);
-+		if (err)
-+			return false;
-+
-+		if (!S_ISCHR(stat.mode))
-+			return false;
-+
-+		if (vi->ubi_num != ubi_major2num(MAJOR(stat.rdev)))
-+			return false;
-+
-+		if (vi->vol_id != MINOR(stat.rdev) - 1)
-+			return false;
-+
-+		return true;
-+	}
-+
-+	if (vol_id == -1) {
-+		if (vi->ubi_num != ubi_num)
-+			return false;
-+
-+		len = strnlen(name, UBI_VOL_NAME_MAX + 1);
-+		if (len < 1 || vi->name_len != len)
-+			return false;
-+
-+		if (strcmp(name, vi->name))
-+			return false;
-+
-+		return true;
-+	}
-+
-+	if (vi->ubi_num != ubi_num)
-+		return false;
-+
-+	if (vi->vol_id != vol_id)
-+		return false;
-+
-+	return true;
-+}
-+
-+static void
-+ubiblock_create_from_param(struct ubi_volume_info *vi)
-+{
-+	int i, ret = 0;
-+	struct ubiblock_param *p;
-+
-+	/*
-+	 * Iterate over ubiblock cmdline parameters. If a parameter matches the
-+	 * newly added volume create the ubiblock device for it.
-+	 */
-+	for (i = 0; i < ubiblock_devs; i++) {
-+		p = &ubiblock_param[i];
-+
-+		if (!match_volume_desc(vi, p->name, p->ubi_num, p->vol_id))
-+			continue;
-+
-+		ret = ubiblock_create(vi);
-+		if (ret) {
-+			pr_err(
-+			       "UBI: block: can't add '%s' volume on ubi%d_%d, err=%d\n",
-+			       vi->name, p->ubi_num, p->vol_id, ret);
-+		}
-+		break;
-+	}
-+}
-+
- static int ubiblock_notify(struct notifier_block *nb,
- 			 unsigned long notification_type, void *ns_ptr)
- {
-@@ -574,10 +654,7 @@ static int ubiblock_notify(struct notifi
- 
- 	switch (notification_type) {
- 	case UBI_VOLUME_ADDED:
--		/*
--		 * We want to enforce explicit block device creation for
--		 * volumes, so when a volume is added we do nothing.
--		 */
-+		ubiblock_create_from_param(&nt->vi);
- 		break;
- 	case UBI_VOLUME_REMOVED:
- 		ubiblock_remove(&nt->vi);
-@@ -603,56 +680,6 @@ static struct notifier_block ubiblock_no
- 	.notifier_call = ubiblock_notify,
- };
- 
--static struct ubi_volume_desc * __init
--open_volume_desc(const char *name, int ubi_num, int vol_id)
--{
--	if (ubi_num == -1)
--		/* No ubi num, name must be a vol device path */
--		return ubi_open_volume_path(name, UBI_READONLY);
--	else if (vol_id == -1)
--		/* No vol_id, must be vol_name */
--		return ubi_open_volume_nm(ubi_num, name, UBI_READONLY);
--	else
--		return ubi_open_volume(ubi_num, vol_id, UBI_READONLY);
--}
--
--static void __init ubiblock_create_from_param(void)
--{
--	int i, ret = 0;
--	struct ubiblock_param *p;
--	struct ubi_volume_desc *desc;
--	struct ubi_volume_info vi;
--
--	/*
--	 * If there is an error creating one of the ubiblocks, continue on to
--	 * create the following ubiblocks. This helps in a circumstance where
--	 * the kernel command-line specifies multiple block devices and some
--	 * may be broken, but we still want the working ones to come up.
--	 */
--	for (i = 0; i < ubiblock_devs; i++) {
--		p = &ubiblock_param[i];
--
--		desc = open_volume_desc(p->name, p->ubi_num, p->vol_id);
--		if (IS_ERR(desc)) {
--			pr_err(
--			       "UBI: block: can't open volume on ubi%d_%d, err=%ld\n",
--			       p->ubi_num, p->vol_id, PTR_ERR(desc));
--			continue;
--		}
--
--		ubi_get_volume_info(desc, &vi);
--		ubi_close_volume(desc);
--
--		ret = ubiblock_create(&vi);
--		if (ret) {
--			pr_err(
--			       "UBI: block: can't add '%s' volume on ubi%d_%d, err=%d\n",
--			       vi.name, p->ubi_num, p->vol_id, ret);
--			continue;
--		}
--	}
--}
--
- static void ubiblock_remove_all(void)
- {
- 	struct ubiblock *next;
-@@ -678,18 +705,7 @@ int __init ubiblock_init(void)
- 	if (ubiblock_major < 0)
- 		return ubiblock_major;
- 
--	/*
--	 * Attach block devices from 'block=' module param.
--	 * Even if one block device in the param list fails to come up,
--	 * still allow the module to load and leave any others up.
--	 */
--	ubiblock_create_from_param();
--
--	/*
--	 * Block devices are only created upon user requests, so we ignore
--	 * existing volumes.
--	 */
--	ret = ubi_register_volume_notifier(&ubiblock_notifier, 1);
-+	ret = ubi_register_volume_notifier(&ubiblock_notifier, 0);
- 	if (ret)
- 		goto err_unreg;
- 	return 0;
diff --git a/target/linux/generic/pending-6.1/450-04-mtd-ubi-attach-from-device-tree.patch b/target/linux/generic/pending-6.1/450-04-mtd-ubi-attach-from-device-tree.patch
deleted file mode 100644
index 6e10e5ebed40..000000000000
--- a/target/linux/generic/pending-6.1/450-04-mtd-ubi-attach-from-device-tree.patch
+++ /dev/null
@@ -1,264 +0,0 @@
-From 471a17d8d1b838092d1a76e48cdce8b5b67ff809 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 27 Nov 2023 01:54:28 +0000
-Subject: [PATCH 04/15] mtd: ubi: attach from device tree
-
-Introduce device tree compatible 'linux,ubi' and attach compatible MTD
-devices using the MTD add notifier. This is needed for a UBI device to
-be available early at boot (and not only after late_initcall), so
-volumes on them can be used eg. as NVMEM providers for other drivers.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/build.c | 146 ++++++++++++++++++++++++++++------------
- drivers/mtd/ubi/cdev.c  |   2 +-
- drivers/mtd/ubi/ubi.h   |   2 +-
- 3 files changed, 106 insertions(+), 44 deletions(-)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -27,6 +27,7 @@
- #include <linux/log2.h>
- #include <linux/kthread.h>
- #include <linux/kernel.h>
-+#include <linux/of.h>
- #include <linux/slab.h>
- #include <linux/major.h>
- #include "ubi.h"
-@@ -1071,6 +1072,7 @@ out_free:
-  * ubi_detach_mtd_dev - detach an MTD device.
-  * @ubi_num: UBI device number to detach from
-  * @anyway: detach MTD even if device reference count is not zero
-+ * @have_lock: called by MTD notifier holding mtd_table_mutex
-  *
-  * This function destroys an UBI device number @ubi_num and detaches the
-  * underlying MTD device. Returns zero in case of success and %-EBUSY if the
-@@ -1080,7 +1082,7 @@ out_free:
-  * Note, the invocations of this function has to be serialized by the
-  * @ubi_devices_mutex.
-  */
--int ubi_detach_mtd_dev(int ubi_num, int anyway)
-+int ubi_detach_mtd_dev(int ubi_num, int anyway, bool have_lock)
- {
- 	struct ubi_device *ubi;
- 
-@@ -1136,7 +1138,11 @@ int ubi_detach_mtd_dev(int ubi_num, int
- 	vfree(ubi->peb_buf);
- 	vfree(ubi->fm_buf);
- 	ubi_msg(ubi, "mtd%d is detached", ubi->mtd->index);
--	put_mtd_device(ubi->mtd);
-+	if (have_lock)
-+		__put_mtd_device(ubi->mtd);
-+	else
-+		put_mtd_device(ubi->mtd);
-+
- 	put_device(&ubi->dev);
- 	return 0;
- }
-@@ -1213,43 +1219,43 @@ static struct mtd_info * __init open_mtd
- 	return mtd;
- }
- 
--static int __init ubi_init(void)
-+static void ubi_notify_add(struct mtd_info *mtd)
- {
--	int err, i, k;
-+	struct device_node *np = mtd_get_of_node(mtd);
-+	int err;
- 
--	/* Ensure that EC and VID headers have correct size */
--	BUILD_BUG_ON(sizeof(struct ubi_ec_hdr) != 64);
--	BUILD_BUG_ON(sizeof(struct ubi_vid_hdr) != 64);
-+	if (!of_device_is_compatible(np, "linux,ubi"))
-+		return;
- 
--	if (mtd_devs > UBI_MAX_DEVICES) {
--		pr_err("UBI error: too many MTD devices, maximum is %d\n",
--		       UBI_MAX_DEVICES);
--		return -EINVAL;
--	}
-+	/*
-+	 * we are already holding &mtd_table_mutex, but still need
-+	 * to bump refcount
-+	 */
-+	err = __get_mtd_device(mtd);
-+	if (err)
-+		return;
- 
--	/* Create base sysfs directory and sysfs files */
--	err = class_register(&ubi_class);
-+	/* called while holding mtd_table_mutex */
-+	mutex_lock_nested(&ubi_devices_mutex, SINGLE_DEPTH_NESTING);
-+	err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0, false);
-+	mutex_unlock(&ubi_devices_mutex);
- 	if (err < 0)
--		return err;
--
--	err = misc_register(&ubi_ctrl_cdev);
--	if (err) {
--		pr_err("UBI error: cannot register device\n");
--		goto out;
--	}
-+		__put_mtd_device(mtd);
-+}
- 
--	ubi_wl_entry_slab = kmem_cache_create("ubi_wl_entry_slab",
--					      sizeof(struct ubi_wl_entry),
--					      0, 0, NULL);
--	if (!ubi_wl_entry_slab) {
--		err = -ENOMEM;
--		goto out_dev_unreg;
--	}
-+static void ubi_notify_remove(struct mtd_info *mtd)
-+{
-+	WARN(1, "mtd%d removed despite UBI still being attached", mtd->index);
-+}
- 
--	err = ubi_debugfs_init();
--	if (err)
--		goto out_slab;
-+static struct mtd_notifier ubi_mtd_notifier = {
-+	.add = ubi_notify_add,
-+	.remove = ubi_notify_remove,
-+};
- 
-+static int __init ubi_init_attach(void)
-+{
-+	int err, i, k;
- 
- 	/* Attach MTD devices */
- 	for (i = 0; i < mtd_devs; i++) {
-@@ -1297,25 +1303,79 @@ static int __init ubi_init(void)
- 		}
- 	}
- 
-+	return 0;
-+
-+out_detach:
-+	for (k = 0; k < i; k++)
-+		if (ubi_devices[k]) {
-+			mutex_lock(&ubi_devices_mutex);
-+			ubi_detach_mtd_dev(ubi_devices[k]->ubi_num, 1, false);
-+			mutex_unlock(&ubi_devices_mutex);
-+		}
-+	return err;
-+}
-+#ifndef CONFIG_MTD_UBI_MODULE
-+late_initcall(ubi_init_attach);
-+#endif
-+
-+static int __init ubi_init(void)
-+{
-+	int err;
-+
-+	/* Ensure that EC and VID headers have correct size */
-+	BUILD_BUG_ON(sizeof(struct ubi_ec_hdr) != 64);
-+	BUILD_BUG_ON(sizeof(struct ubi_vid_hdr) != 64);
-+
-+	if (mtd_devs > UBI_MAX_DEVICES) {
-+		pr_err("UBI error: too many MTD devices, maximum is %d\n",
-+		       UBI_MAX_DEVICES);
-+		return -EINVAL;
-+	}
-+
-+	/* Create base sysfs directory and sysfs files */
-+	err = class_register(&ubi_class);
-+	if (err < 0)
-+		return err;
-+
-+	err = misc_register(&ubi_ctrl_cdev);
-+	if (err) {
-+		pr_err("UBI error: cannot register device\n");
-+		goto out;
-+	}
-+
-+	ubi_wl_entry_slab = kmem_cache_create("ubi_wl_entry_slab",
-+					      sizeof(struct ubi_wl_entry),
-+					      0, 0, NULL);
-+	if (!ubi_wl_entry_slab) {
-+		err = -ENOMEM;
-+		goto out_dev_unreg;
-+	}
-+
-+	err = ubi_debugfs_init();
-+	if (err)
-+		goto out_slab;
-+
- 	err = ubiblock_init();
- 	if (err) {
- 		pr_err("UBI error: block: cannot initialize, error %d\n", err);
- 
- 		/* See comment above re-ubi_is_module(). */
- 		if (ubi_is_module())
--			goto out_detach;
-+			goto out_slab;
-+	}
-+
-+	register_mtd_user(&ubi_mtd_notifier);
-+
-+	if (ubi_is_module()) {
-+		err = ubi_init_attach();
-+		if (err)
-+			goto out_mtd_notifier;
- 	}
- 
- 	return 0;
- 
--out_detach:
--	for (k = 0; k < i; k++)
--		if (ubi_devices[k]) {
--			mutex_lock(&ubi_devices_mutex);
--			ubi_detach_mtd_dev(ubi_devices[k]->ubi_num, 1);
--			mutex_unlock(&ubi_devices_mutex);
--		}
--	ubi_debugfs_exit();
-+out_mtd_notifier:
-+	unregister_mtd_user(&ubi_mtd_notifier);
- out_slab:
- 	kmem_cache_destroy(ubi_wl_entry_slab);
- out_dev_unreg:
-@@ -1325,18 +1385,20 @@ out:
- 	pr_err("UBI error: cannot initialize UBI, error %d\n", err);
- 	return err;
- }
--late_initcall(ubi_init);
-+device_initcall(ubi_init);
-+
- 
- static void __exit ubi_exit(void)
- {
- 	int i;
- 
- 	ubiblock_exit();
-+	unregister_mtd_user(&ubi_mtd_notifier);
- 
- 	for (i = 0; i < UBI_MAX_DEVICES; i++)
- 		if (ubi_devices[i]) {
- 			mutex_lock(&ubi_devices_mutex);
--			ubi_detach_mtd_dev(ubi_devices[i]->ubi_num, 1);
-+			ubi_detach_mtd_dev(ubi_devices[i]->ubi_num, 1, false);
- 			mutex_unlock(&ubi_devices_mutex);
- 		}
- 	ubi_debugfs_exit();
---- a/drivers/mtd/ubi/cdev.c
-+++ b/drivers/mtd/ubi/cdev.c
-@@ -1065,7 +1065,7 @@ static long ctrl_cdev_ioctl(struct file
- 		}
- 
- 		mutex_lock(&ubi_devices_mutex);
--		err = ubi_detach_mtd_dev(ubi_num, 0);
-+		err = ubi_detach_mtd_dev(ubi_num, 0, false);
- 		mutex_unlock(&ubi_devices_mutex);
- 		break;
- 	}
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -939,7 +939,7 @@ int ubi_io_write_vid_hdr(struct ubi_devi
- int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num,
- 		       int vid_hdr_offset, int max_beb_per1024,
- 		       bool disable_fm);
--int ubi_detach_mtd_dev(int ubi_num, int anyway);
-+int ubi_detach_mtd_dev(int ubi_num, int anyway, bool have_lock);
- struct ubi_device *ubi_get_device(int ubi_num);
- void ubi_put_device(struct ubi_device *ubi);
- struct ubi_device *ubi_get_by_major(int major);
diff --git a/target/linux/generic/pending-6.1/450-05-mtd-ubi-introduce-pre-removal-notification-for-UBI-v.patch b/target/linux/generic/pending-6.1/450-05-mtd-ubi-introduce-pre-removal-notification-for-UBI-v.patch
deleted file mode 100644
index d5da37b8562e..000000000000
--- a/target/linux/generic/pending-6.1/450-05-mtd-ubi-introduce-pre-removal-notification-for-UBI-v.patch
+++ /dev/null
@@ -1,226 +0,0 @@
-From 2d664266cfdd114cc7a1fa28dd64275e99222455 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 8 Jun 2023 17:18:09 +0100
-Subject: [PATCH 05/15] mtd: ubi: introduce pre-removal notification for UBI
- volumes
-
-Introduce a new notification type UBI_VOLUME_SHUTDOWN to inform users
-that a volume is just about to be removed.
-This is needed because users (such as the NVMEM subsystem) expect that
-at the time their removal function is called, the parenting device is
-still available (for removal of sysfs nodes, for example, in case of
-NVMEM which otherwise WARNs on volume removal).
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 26 ++++++++++++++++++++++++++
- drivers/mtd/ubi/build.c | 20 +++++++++++++++-----
- drivers/mtd/ubi/kapi.c  |  2 +-
- drivers/mtd/ubi/ubi.h   |  2 ++
- drivers/mtd/ubi/vmt.c   | 17 +++++++++++++++--
- include/linux/mtd/ubi.h |  2 ++
- 6 files changed, 61 insertions(+), 8 deletions(-)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -568,6 +568,29 @@ static int ubiblock_resize(struct ubi_vo
- 	return 0;
- }
- 
-+static int ubiblock_shutdown(struct ubi_volume_info *vi)
-+{
-+	struct ubiblock *dev;
-+	struct gendisk *disk;
-+	int ret = 0;
-+
-+	mutex_lock(&devices_mutex);
-+	dev = find_dev_nolock(vi->ubi_num, vi->vol_id);
-+	if (!dev) {
-+		ret = -ENODEV;
-+		goto out_unlock;
-+	}
-+	disk = dev->gd;
-+
-+out_unlock:
-+	mutex_unlock(&devices_mutex);
-+
-+	if (!ret)
-+		blk_mark_disk_dead(disk);
-+
-+	return ret;
-+};
-+
- static bool
- match_volume_desc(struct ubi_volume_info *vi, const char *name, int ubi_num, int vol_id)
- {
-@@ -659,6 +682,9 @@ static int ubiblock_notify(struct notifi
- 	case UBI_VOLUME_REMOVED:
- 		ubiblock_remove(&nt->vi);
- 		break;
-+	case UBI_VOLUME_SHUTDOWN:
-+		ubiblock_shutdown(&nt->vi);
-+		break;
- 	case UBI_VOLUME_RESIZED:
- 		ubiblock_resize(&nt->vi);
- 		break;
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -89,7 +89,7 @@ static struct ubi_device *ubi_devices[UB
- /* Serializes UBI devices creations and removals */
- DEFINE_MUTEX(ubi_devices_mutex);
- 
--/* Protects @ubi_devices and @ubi->ref_count */
-+/* Protects @ubi_devices, @ubi->ref_count and @ubi->is_dead */
- static DEFINE_SPINLOCK(ubi_devices_lock);
- 
- /* "Show" method for files in '/<sysfs>/class/ubi/' */
-@@ -258,6 +258,9 @@ struct ubi_device *ubi_get_device(int ub
- 
- 	spin_lock(&ubi_devices_lock);
- 	ubi = ubi_devices[ubi_num];
-+	if (ubi && ubi->is_dead)
-+		ubi = NULL;
-+
- 	if (ubi) {
- 		ubi_assert(ubi->ref_count >= 0);
- 		ubi->ref_count += 1;
-@@ -295,7 +298,7 @@ struct ubi_device *ubi_get_by_major(int
- 	spin_lock(&ubi_devices_lock);
- 	for (i = 0; i < UBI_MAX_DEVICES; i++) {
- 		ubi = ubi_devices[i];
--		if (ubi && MAJOR(ubi->cdev.dev) == major) {
-+		if (ubi && !ubi->is_dead && MAJOR(ubi->cdev.dev) == major) {
- 			ubi_assert(ubi->ref_count >= 0);
- 			ubi->ref_count += 1;
- 			get_device(&ubi->dev);
-@@ -324,7 +327,7 @@ int ubi_major2num(int major)
- 	for (i = 0; i < UBI_MAX_DEVICES; i++) {
- 		struct ubi_device *ubi = ubi_devices[i];
- 
--		if (ubi && MAJOR(ubi->cdev.dev) == major) {
-+		if (ubi && !ubi->is_dead && MAJOR(ubi->cdev.dev) == major) {
- 			ubi_num = ubi->ubi_num;
- 			break;
- 		}
-@@ -511,7 +514,7 @@ static void ubi_free_volumes_from(struct
- 	int i;
- 
- 	for (i = from; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
--		if (!ubi->volumes[i])
-+		if (!ubi->volumes[i] || ubi->volumes[i]->is_dead)
- 			continue;
- 		ubi_eba_replace_table(ubi->volumes[i], NULL);
- 		ubi_fastmap_destroy_checkmap(ubi->volumes[i]);
-@@ -1094,10 +1097,10 @@ int ubi_detach_mtd_dev(int ubi_num, int
- 		return -EINVAL;
- 
- 	spin_lock(&ubi_devices_lock);
--	put_device(&ubi->dev);
- 	ubi->ref_count -= 1;
- 	if (ubi->ref_count) {
- 		if (!anyway) {
-+			ubi->ref_count += 1;
- 			spin_unlock(&ubi_devices_lock);
- 			return -EBUSY;
- 		}
-@@ -1105,6 +1108,13 @@ int ubi_detach_mtd_dev(int ubi_num, int
- 		ubi_err(ubi, "%s reference count %d, destroy anyway",
- 			ubi->ubi_name, ubi->ref_count);
- 	}
-+	ubi->is_dead = true;
-+	spin_unlock(&ubi_devices_lock);
-+
-+	ubi_notify_all(ubi, UBI_VOLUME_SHUTDOWN, NULL);
-+
-+	spin_lock(&ubi_devices_lock);
-+	put_device(&ubi->dev);
- 	ubi_devices[ubi_num] = NULL;
- 	spin_unlock(&ubi_devices_lock);
- 
---- a/drivers/mtd/ubi/kapi.c
-+++ b/drivers/mtd/ubi/kapi.c
-@@ -152,7 +152,7 @@ struct ubi_volume_desc *ubi_open_volume(
- 
- 	spin_lock(&ubi->volumes_lock);
- 	vol = ubi->volumes[vol_id];
--	if (!vol)
-+	if (!vol || vol->is_dead)
- 		goto out_unlock;
- 
- 	err = -EBUSY;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -345,6 +345,7 @@ struct ubi_volume {
- 	int writers;
- 	int exclusive;
- 	int metaonly;
-+	bool is_dead;
- 
- 	int reserved_pebs;
- 	int vol_type;
-@@ -564,6 +565,7 @@ struct ubi_device {
- 	spinlock_t volumes_lock;
- 	int ref_count;
- 	int image_seq;
-+	bool is_dead;
- 
- 	int rsvd_pebs;
- 	int avail_pebs;
---- a/drivers/mtd/ubi/vmt.c
-+++ b/drivers/mtd/ubi/vmt.c
-@@ -59,7 +59,7 @@ static ssize_t vol_attribute_show(struct
- 	struct ubi_device *ubi = vol->ubi;
- 
- 	spin_lock(&ubi->volumes_lock);
--	if (!ubi->volumes[vol->vol_id]) {
-+	if (!ubi->volumes[vol->vol_id] || ubi->volumes[vol->vol_id]->is_dead) {
- 		spin_unlock(&ubi->volumes_lock);
- 		return -ENODEV;
- 	}
-@@ -189,7 +189,7 @@ int ubi_create_volume(struct ubi_device
- 
- 	/* Ensure that the name is unique */
- 	for (i = 0; i < ubi->vtbl_slots; i++)
--		if (ubi->volumes[i] &&
-+		if (ubi->volumes[i] && !ubi->volumes[i]->is_dead &&
- 		    ubi->volumes[i]->name_len == req->name_len &&
- 		    !strcmp(ubi->volumes[i]->name, req->name)) {
- 			ubi_err(ubi, "volume \"%s\" exists (ID %d)",
-@@ -352,6 +352,19 @@ int ubi_remove_volume(struct ubi_volume_
- 		err = -EBUSY;
- 		goto out_unlock;
- 	}
-+
-+	/*
-+	 * Mark volume as dead at this point to prevent that anyone
-+	 * can take a reference to the volume from now on.
-+	 * This is necessary as we have to release the spinlock before
-+	 * calling ubi_volume_notify.
-+	 */
-+	vol->is_dead = true;
-+	spin_unlock(&ubi->volumes_lock);
-+
-+	ubi_volume_notify(ubi, vol, UBI_VOLUME_SHUTDOWN);
-+
-+	spin_lock(&ubi->volumes_lock);
- 	ubi->volumes[vol_id] = NULL;
- 	spin_unlock(&ubi->volumes_lock);
- 
---- a/include/linux/mtd/ubi.h
-+++ b/include/linux/mtd/ubi.h
-@@ -192,6 +192,7 @@ struct ubi_device_info {
-  *			or a volume was removed)
-  * @UBI_VOLUME_RESIZED: a volume has been re-sized
-  * @UBI_VOLUME_RENAMED: a volume has been re-named
-+ * @UBI_VOLUME_SHUTDOWN: a volume is going to removed, shutdown users
-  * @UBI_VOLUME_UPDATED: data has been written to a volume
-  *
-  * These constants define which type of event has happened when a volume
-@@ -202,6 +203,7 @@ enum {
- 	UBI_VOLUME_REMOVED,
- 	UBI_VOLUME_RESIZED,
- 	UBI_VOLUME_RENAMED,
-+	UBI_VOLUME_SHUTDOWN,
- 	UBI_VOLUME_UPDATED,
- };
- 
diff --git a/target/linux/generic/pending-6.1/450-06-mtd-ubi-populate-ubi-volume-fwnode.patch b/target/linux/generic/pending-6.1/450-06-mtd-ubi-populate-ubi-volume-fwnode.patch
deleted file mode 100644
index 132276696547..000000000000
--- a/target/linux/generic/pending-6.1/450-06-mtd-ubi-populate-ubi-volume-fwnode.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 3a041ee543cdf2e707a1dd72946cd6a583509b28 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 21 Jul 2023 19:26:37 +0100
-Subject: [PATCH 06/15] mtd: ubi: populate ubi volume fwnode
-
-Look for the 'volumes' subnode of an MTD partition attached to a UBI
-device and attach matching child nodes to UBI volumes.
-This allows UBI volumes to be referenced in device tree, e.g. for use
-as NVMEM providers.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/vmt.c | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/drivers/mtd/ubi/vmt.c
-+++ b/drivers/mtd/ubi/vmt.c
-@@ -124,6 +124,31 @@ static void vol_release(struct device *d
- 	kfree(vol);
- }
- 
-+static struct fwnode_handle *find_volume_fwnode(struct ubi_volume *vol)
-+{
-+	struct fwnode_handle *fw_vols, *fw_vol;
-+	const char *volname;
-+	u32 volid;
-+
-+	fw_vols = device_get_named_child_node(vol->dev.parent->parent, "volumes");
-+	if (!fw_vols)
-+		return NULL;
-+
-+	fwnode_for_each_child_node(fw_vols, fw_vol) {
-+		if (!fwnode_property_read_string(fw_vol, "volname", &volname) &&
-+		    strncmp(volname, vol->name, vol->name_len))
-+			continue;
-+
-+		if (!fwnode_property_read_u32(fw_vol, "volid", &volid) &&
-+		    vol->vol_id != volid)
-+			continue;
-+
-+		return fw_vol;
-+	}
-+
-+	return NULL;
-+}
-+
- /**
-  * ubi_create_volume - create volume.
-  * @ubi: UBI device description object
-@@ -223,6 +248,7 @@ int ubi_create_volume(struct ubi_device
- 	vol->name_len  = req->name_len;
- 	memcpy(vol->name, req->name, vol->name_len);
- 	vol->ubi = ubi;
-+	device_set_node(&vol->dev, find_volume_fwnode(vol));
- 
- 	/*
- 	 * Finish all pending erases because there may be some LEBs belonging
-@@ -605,6 +631,7 @@ int ubi_add_volume(struct ubi_device *ub
- 	vol->dev.class = &ubi_class;
- 	vol->dev.groups = volume_dev_groups;
- 	dev_set_name(&vol->dev, "%s_%d", ubi->ubi_name, vol->vol_id);
-+	device_set_node(&vol->dev, find_volume_fwnode(vol));
- 	err = device_register(&vol->dev);
- 	if (err) {
- 		cdev_del(&vol->cdev);
diff --git a/target/linux/generic/pending-6.1/450-07-mtd-ubi-provide-NVMEM-layer-over-UBI-volumes.patch b/target/linux/generic/pending-6.1/450-07-mtd-ubi-provide-NVMEM-layer-over-UBI-volumes.patch
deleted file mode 100644
index 59a1eb9374ea..000000000000
--- a/target/linux/generic/pending-6.1/450-07-mtd-ubi-provide-NVMEM-layer-over-UBI-volumes.patch
+++ /dev/null
@@ -1,246 +0,0 @@
-From 7eb6666348f3f2d1f7308c712fa5903cbe189401 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 8 Jun 2023 17:22:04 +0100
-Subject: [PATCH 07/15] mtd: ubi: provide NVMEM layer over UBI volumes
-
-In an ideal world we would like UBI to be used where ever possible on a
-NAND chip. And with UBI support in ARM Trusted Firmware and U-Boot it
-is possible to achieve an (almost-)all-UBI flash layout. Hence the need
-for a way to also use UBI volumes to store board-level constants, such
-as MAC addresses and calibration data of wireless interfaces.
-
-Add UBI volume NVMEM driver module exposing UBI volumes as NVMEM
-providers. Allow UBI devices to have a "volumes" firmware subnode with
-volumes which may be compatible with "nvmem-cells".
-Access to UBI volumes via the NVMEM interface at this point is
-read-only, and it is slow, opening and closing the UBI volume for each
-access due to limitations of the NVMEM provider API.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/Kconfig  |  12 +++
- drivers/mtd/ubi/Makefile |   1 +
- drivers/mtd/ubi/nvmem.c  | 188 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 201 insertions(+)
- create mode 100644 drivers/mtd/ubi/nvmem.c
-
---- a/drivers/mtd/ubi/Kconfig
-+++ b/drivers/mtd/ubi/Kconfig
-@@ -104,4 +104,16 @@ config MTD_UBI_BLOCK
- 
- 	   If in doubt, say "N".
- 
-+config MTD_UBI_NVMEM
-+	tristate "UBI virtual NVMEM"
-+	default n
-+	depends on NVMEM
-+	help
-+	   This option enabled an additional driver exposing UBI volumes as NVMEM
-+	   providers, intended for platforms where UBI is part of the firmware
-+	   specification and used to store also e.g. MAC addresses or board-
-+	   specific Wi-Fi calibration data.
-+
-+	   If in doubt, say "N".
-+
- endif # MTD_UBI
---- a/drivers/mtd/ubi/Makefile
-+++ b/drivers/mtd/ubi/Makefile
-@@ -7,3 +7,4 @@ ubi-$(CONFIG_MTD_UBI_FASTMAP) += fastmap
- ubi-$(CONFIG_MTD_UBI_BLOCK) += block.o
- 
- obj-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o
-+obj-$(CONFIG_MTD_UBI_NVMEM) += nvmem.o
---- /dev/null
-+++ b/drivers/mtd/ubi/nvmem.c
-@@ -0,0 +1,191 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * Copyright (c) 2023 Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+/* UBI NVMEM provider */
-+#include "ubi.h"
-+#include <linux/nvmem-provider.h>
-+#include <asm/div64.h>
-+
-+/* List of all NVMEM devices */
-+static LIST_HEAD(nvmem_devices);
-+static DEFINE_MUTEX(devices_mutex);
-+
-+struct ubi_nvmem {
-+	struct nvmem_device *nvmem;
-+	int ubi_num;
-+	int vol_id;
-+	int usable_leb_size;
-+	struct list_head list;
-+};
-+
-+static int ubi_nvmem_reg_read(void *priv, unsigned int from,
-+			      void *val, size_t bytes)
-+{
-+	uint32_t offs, to_read, bytes_left;
-+	struct ubi_nvmem *unv = priv;
-+	struct ubi_volume_desc *desc;
-+	uint64_t lnum = from;
-+	int err = 0;
-+
-+	desc = ubi_open_volume(unv->ubi_num, unv->vol_id, UBI_READONLY);
-+	if (IS_ERR(desc))
-+		return PTR_ERR(desc);
-+
-+	bytes_left = bytes;
-+	offs = do_div(lnum, unv->usable_leb_size);
-+	while (bytes_left) {
-+		to_read = unv->usable_leb_size - offs;
-+
-+		if (to_read > bytes_left)
-+			to_read = bytes_left;
-+
-+		err = ubi_read(desc, lnum, val, offs, to_read);
-+		if (err)
-+			break;
-+
-+		lnum += 1;
-+		offs = 0;
-+		bytes_left -= to_read;
-+		val += to_read;
-+	}
-+	ubi_close_volume(desc);
-+
-+	if (err)
-+		return err;
-+
-+	return bytes_left == 0 ? 0 : -EIO;
-+}
-+
-+static int ubi_nvmem_add(struct ubi_volume_info *vi)
-+{
-+	struct device_node *np = dev_of_node(vi->dev);
-+	struct nvmem_config config = {};
-+	struct ubi_nvmem *unv;
-+	int ret;
-+
-+	if (!np)
-+		return 0;
-+
-+	if (!of_get_child_by_name(np, "nvmem-layout"))
-+		return 0;
-+
-+	if (WARN_ON_ONCE(vi->usable_leb_size <= 0) ||
-+	    WARN_ON_ONCE(vi->size <= 0))
-+		return -EINVAL;
-+
-+	unv = kzalloc(sizeof(struct ubi_nvmem), GFP_KERNEL);
-+	if (!unv)
-+		return -ENOMEM;
-+
-+	config.id = NVMEM_DEVID_NONE;
-+	config.dev = vi->dev;
-+	config.name = dev_name(vi->dev);
-+	config.owner = THIS_MODULE;
-+	config.priv = unv;
-+	config.reg_read = ubi_nvmem_reg_read;
-+	config.size = vi->usable_leb_size * vi->size;
-+	config.word_size = 1;
-+	config.stride = 1;
-+	config.read_only = true;
-+	config.root_only = true;
-+	config.ignore_wp = true;
-+	config.of_node = np;
-+
-+	unv->ubi_num = vi->ubi_num;
-+	unv->vol_id = vi->vol_id;
-+	unv->usable_leb_size = vi->usable_leb_size;
-+	unv->nvmem = nvmem_register(&config);
-+	if (IS_ERR(unv->nvmem)) {
-+		ret = dev_err_probe(vi->dev, PTR_ERR(unv->nvmem),
-+				    "Failed to register NVMEM device\n");
-+		kfree(unv);
-+		return ret;
-+	}
-+
-+	mutex_lock(&devices_mutex);
-+	list_add_tail(&unv->list, &nvmem_devices);
-+	mutex_unlock(&devices_mutex);
-+
-+	return 0;
-+}
-+
-+static void ubi_nvmem_remove(struct ubi_volume_info *vi)
-+{
-+	struct ubi_nvmem *unv_c, *unv = NULL;
-+
-+	mutex_lock(&devices_mutex);
-+	list_for_each_entry(unv_c, &nvmem_devices, list)
-+		if (unv_c->ubi_num == vi->ubi_num && unv_c->vol_id == vi->vol_id) {
-+			unv = unv_c;
-+			break;
-+		}
-+
-+	if (!unv) {
-+		mutex_unlock(&devices_mutex);
-+		return;
-+	}
-+
-+	list_del(&unv->list);
-+	mutex_unlock(&devices_mutex);
-+	nvmem_unregister(unv->nvmem);
-+	kfree(unv);
-+}
-+
-+/**
-+ * nvmem_notify - UBI notification handler.
-+ * @nb: registered notifier block
-+ * @l: notification type
-+ * @ns_ptr: pointer to the &struct ubi_notification object
-+ */
-+static int nvmem_notify(struct notifier_block *nb, unsigned long l,
-+			 void *ns_ptr)
-+{
-+	struct ubi_notification *nt = ns_ptr;
-+
-+	switch (l) {
-+	case UBI_VOLUME_RESIZED:
-+		ubi_nvmem_remove(&nt->vi);
-+		fallthrough;
-+	case UBI_VOLUME_ADDED:
-+		ubi_nvmem_add(&nt->vi);
-+		break;
-+	case UBI_VOLUME_SHUTDOWN:
-+		ubi_nvmem_remove(&nt->vi);
-+		break;
-+	default:
-+		break;
-+	}
-+	return NOTIFY_OK;
-+}
-+
-+static struct notifier_block nvmem_notifier = {
-+	.notifier_call = nvmem_notify,
-+};
-+
-+static int __init ubi_nvmem_init(void)
-+{
-+	return ubi_register_volume_notifier(&nvmem_notifier, 0);
-+}
-+
-+static void __exit ubi_nvmem_exit(void)
-+{
-+	struct ubi_nvmem *unv, *tmp;
-+
-+	mutex_lock(&devices_mutex);
-+	list_for_each_entry_safe(unv, tmp, &nvmem_devices, list) {
-+		nvmem_unregister(unv->nvmem);
-+		list_del(&unv->list);
-+		kfree(unv);
-+	}
-+	mutex_unlock(&devices_mutex);
-+
-+	ubi_unregister_volume_notifier(&nvmem_notifier);
-+}
-+
-+module_init(ubi_nvmem_init);
-+module_exit(ubi_nvmem_exit);
-+MODULE_DESCRIPTION("NVMEM layer over UBI volumes");
-+MODULE_AUTHOR("Daniel Golle");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/pending-6.1/450-08-dt-bindings-block-add-basic-bindings-for-block-devic.patch b/target/linux/generic/pending-6.1/450-08-dt-bindings-block-add-basic-bindings-for-block-devic.patch
deleted file mode 100644
index d0727faf3dc1..000000000000
--- a/target/linux/generic/pending-6.1/450-08-dt-bindings-block-add-basic-bindings-for-block-devic.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 9ffc1d7d73609a89eb264d6066340f8b7b3b0ebe Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 7 Aug 2023 21:19:45 +0100
-Subject: [PATCH 08/15] dt-bindings: block: add basic bindings for block
- devices
-
-Add bindings for block devices which are used to allow referencing
-nvmem bits on them.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- .../bindings/block/block-device.yaml          | 22 ++++++++
- .../devicetree/bindings/block/partition.yaml  | 50 +++++++++++++++++++
- .../devicetree/bindings/block/partitions.yaml | 20 ++++++++
- 3 files changed, 92 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/block/block-device.yaml
- create mode 100644 Documentation/devicetree/bindings/block/partition.yaml
- create mode 100644 Documentation/devicetree/bindings/block/partitions.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/block/block-device.yaml
-@@ -0,0 +1,22 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/block/block-device.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: block storage device
-+
-+description: |
-+  This binding is generic and describes a block-oriented storage device.
-+
-+maintainers:
-+  - Daniel Golle <daniel@makrotopia.org>
-+
-+properties:
-+  partitions:
-+    $ref: /schemas/block/partitions.yaml
-+
-+  nvmem-layout:
-+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml#
-+
-+unevaluatedProperties: false
---- /dev/null
-+++ b/Documentation/devicetree/bindings/block/partition.yaml
-@@ -0,0 +1,50 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/block/partition.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Partition on a block device
-+
-+description: |
-+  This binding describes a partition on a block device.
-+  Partitions may be matched by a combination of partition number, name,
-+  and UUID.
-+
-+maintainers:
-+  - Daniel Golle <daniel@makrotopia.org>
-+
-+properties:
-+  $nodename:
-+    pattern: '^block-partition-.+$'
-+
-+  partnum:
-+    description:
-+      Matches partition by number if present.
-+
-+  partname:
-+    "$ref": "/schemas/types.yaml#/definitions/string"
-+    description:
-+      Matches partition by PARTNAME if present.
-+
-+  uuid:
-+    "$ref": "/schemas/types.yaml#/definitions/string"
-+    description:
-+      Matches partition by PARTUUID if present.
-+
-+  nvmem-layout:
-+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml#
-+    description:
-+      This container may reference an NVMEM layout parser.
-+
-+anyOf:
-+  - required:
-+    - partnum
-+
-+  - required:
-+    - partname
-+
-+  - required:
-+    - uuid
-+
-+unevaluatedProperties: false
---- /dev/null
-+++ b/Documentation/devicetree/bindings/block/partitions.yaml
-@@ -0,0 +1,20 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/block/partitions.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Partitions on block devices
-+
-+description: |
-+  This binding is generic and describes the content of the partitions container
-+  node.
-+
-+maintainers:
-+  - Daniel Golle <daniel@makrotopia.org>
-+
-+patternProperties:
-+  "^block-partition-.+$":
-+    $ref: partition.yaml
-+
-+unevaluatedProperties: false
diff --git a/target/linux/generic/pending-6.1/450-09-block-partitions-populate-fwnode.patch b/target/linux/generic/pending-6.1/450-09-block-partitions-populate-fwnode.patch
deleted file mode 100644
index 8aa5cba67889..000000000000
--- a/target/linux/generic/pending-6.1/450-09-block-partitions-populate-fwnode.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 614f4f6fdda09e30ecf7ef6c8091579db15018cb Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 21 Jul 2023 17:51:03 +0100
-Subject: [PATCH 09/15] block: partitions: populate fwnode
-
-Let block partitions to be represented by a firmware node and hence
-allow them to being referenced e.g. for use with blk-nvmem.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- block/partitions/core.c | 41 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 41 insertions(+)
-
---- a/block/partitions/core.c
-+++ b/block/partitions/core.c
-@@ -10,6 +10,8 @@
- #include <linux/ctype.h>
- #include <linux/vmalloc.h>
- #include <linux/raid/detect.h>
-+#include <linux/property.h>
-+
- #include "check.h"
- 
- static int (*check_part[])(struct parsed_partitions *) = {
-@@ -298,6 +300,43 @@ static ssize_t whole_disk_show(struct de
- }
- static DEVICE_ATTR(whole_disk, 0444, whole_disk_show, NULL);
- 
-+static struct fwnode_handle *find_partition_fwnode(struct block_device *bdev)
-+{
-+	struct fwnode_handle *fw_parts, *fw_part;
-+	struct device *ddev = disk_to_dev(bdev->bd_disk);
-+	const char *partname, *uuid;
-+	u32 partno;
-+
-+	fw_parts = device_get_named_child_node(ddev, "partitions");
-+	if (!fw_parts)
-+		fw_parts = device_get_named_child_node(ddev->parent, "partitions");
-+
-+	if (!fw_parts)
-+		return NULL;
-+
-+	fwnode_for_each_child_node(fw_parts, fw_part) {
-+		if (!fwnode_property_read_string(fw_part, "uuid", &uuid) &&
-+		    (!bdev->bd_meta_info || strncmp(uuid,
-+						    bdev->bd_meta_info->uuid,
-+						    PARTITION_META_INFO_UUIDLTH)))
-+			continue;
-+
-+		if (!fwnode_property_read_string(fw_part, "partname", &partname) &&
-+		    (!bdev->bd_meta_info || strncmp(partname,
-+						    bdev->bd_meta_info->volname,
-+						    PARTITION_META_INFO_VOLNAMELTH)))
-+			continue;
-+
-+		if (!fwnode_property_read_u32(fw_part, "partno", &partno) &&
-+		    bdev->bd_partno != partno)
-+			continue;
-+
-+		return fw_part;
-+	}
-+
-+	return NULL;
-+}
-+
- /*
-  * Must be called either with open_mutex held, before a disk can be opened or
-  * after all disk users are gone.
-@@ -380,6 +419,8 @@ static struct block_device *add_partitio
- 			goto out_put;
- 	}
- 
-+	device_set_node(pdev, find_partition_fwnode(bdev));
-+
- 	/* delay uevent until 'holders' subdir is created */
- 	dev_set_uevent_suppress(pdev, 1);
- 	err = device_add(pdev);
diff --git a/target/linux/generic/pending-6.1/450-10-block-add-new-genhd-flag-GENHD_FL_NVMEM.patch b/target/linux/generic/pending-6.1/450-10-block-add-new-genhd-flag-GENHD_FL_NVMEM.patch
deleted file mode 100644
index 4cbec14f5c97..000000000000
--- a/target/linux/generic/pending-6.1/450-10-block-add-new-genhd-flag-GENHD_FL_NVMEM.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 65f3ff9672ccd5ee78937047e7a2fc696eee1c8f Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 13 Jul 2023 04:07:16 +0100
-Subject: [PATCH 10/15] block: add new genhd flag GENHD_FL_NVMEM
-
-Add new flag to destinguish block devices which may act as an NVMEM
-provider.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- include/linux/blkdev.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/linux/blkdev.h
-+++ b/include/linux/blkdev.h
-@@ -87,11 +87,13 @@ struct partition_meta_info {
-  * ``GENHD_FL_NO_PART``: partition support is disabled.  The kernel will not
-  * scan for partitions from add_disk, and users can't add partitions manually.
-  *
-+ * ``GENHD_FL_NVMEM``: the block device should be considered as NVMEM provider.
-  */
- enum {
- 	GENHD_FL_REMOVABLE			= 1 << 0,
- 	GENHD_FL_HIDDEN				= 1 << 1,
- 	GENHD_FL_NO_PART			= 1 << 2,
-+	GENHD_FL_NVMEM				= 1 << 3,
- };
- 
- enum {
diff --git a/target/linux/generic/pending-6.1/450-11-block-implement-NVMEM-provider.patch b/target/linux/generic/pending-6.1/450-11-block-implement-NVMEM-provider.patch
deleted file mode 100644
index e18b0c3a5c78..000000000000
--- a/target/linux/generic/pending-6.1/450-11-block-implement-NVMEM-provider.patch
+++ /dev/null
@@ -1,235 +0,0 @@
-From b9936aa8a3775c2027f655d91a206d0e6e1c7ec0 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 11 Jul 2023 00:17:31 +0100
-Subject: [PATCH 11/15] block: implement NVMEM provider
-
-On embedded devices using an eMMC it is common that one or more partitions
-on the eMMC are used to store MAC addresses and Wi-Fi calibration EEPROM
-data. Allow referencing the partition in device tree for the kernel and
-Wi-Fi drivers accessing it via the NVMEM layer.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- block/Kconfig     |   9 +++
- block/Makefile    |   1 +
- block/blk-nvmem.c | 186 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 196 insertions(+)
- create mode 100644 block/blk-nvmem.c
-
---- a/block/Kconfig
-+++ b/block/Kconfig
-@@ -203,6 +203,15 @@ config BLK_INLINE_ENCRYPTION_FALLBACK
- 	  by falling back to the kernel crypto API when inline
- 	  encryption hardware is not present.
- 
-+config BLK_NVMEM
-+	bool "Block device NVMEM provider"
-+	depends on OF
-+	depends on NVMEM
-+	help
-+	  Allow block devices (or partitions) to act as NVMEM prodivers,
-+	  typically used with eMMC to store MAC addresses or Wi-Fi
-+	  calibration data on embedded devices.
-+
- source "block/partitions/Kconfig"
- 
- config BLOCK_COMPAT
---- a/block/Makefile
-+++ b/block/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_BLK_DEV_ZONED)	+= blk-zoned
- obj-$(CONFIG_BLK_WBT)		+= blk-wbt.o
- obj-$(CONFIG_BLK_DEBUG_FS)	+= blk-mq-debugfs.o
- obj-$(CONFIG_BLK_DEBUG_FS_ZONED)+= blk-mq-debugfs-zoned.o
-+obj-$(CONFIG_BLK_NVMEM)		+= blk-nvmem.o
- obj-$(CONFIG_BLK_SED_OPAL)	+= sed-opal.o
- obj-$(CONFIG_BLK_PM)		+= blk-pm.o
- obj-$(CONFIG_BLK_INLINE_ENCRYPTION)	+= blk-crypto.o blk-crypto-profile.o \
---- /dev/null
-+++ b/block/blk-nvmem.c
-@@ -0,0 +1,186 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/*
-+ * block device NVMEM provider
-+ *
-+ * Copyright (c) 2023 Daniel Golle <daniel@makrotopia.org>
-+ *
-+ * Useful on devices using a partition on an eMMC for MAC addresses or
-+ * Wi-Fi calibration EEPROM data.
-+ */
-+
-+#include "blk.h"
-+#include <linux/nvmem-provider.h>
-+#include <linux/of.h>
-+#include <linux/pagemap.h>
-+#include <linux/property.h>
-+
-+/* List of all NVMEM devices */
-+static LIST_HEAD(nvmem_devices);
-+static DEFINE_MUTEX(devices_mutex);
-+
-+struct blk_nvmem {
-+	struct nvmem_device *nvmem;
-+	struct block_device *bdev;
-+	struct list_head list;
-+};
-+
-+static int blk_nvmem_reg_read(void *priv, unsigned int from,
-+			      void *val, size_t bytes)
-+{
-+	unsigned long offs = from & ~PAGE_MASK, to_read;
-+	pgoff_t f_index = from >> PAGE_SHIFT;
-+	struct address_space *mapping;
-+	struct blk_nvmem *bnv = priv;
-+	size_t bytes_left = bytes;
-+	struct folio *folio;
-+	void *p;
-+	int ret;
-+
-+	if (!bnv->bdev)
-+		return -ENODEV;
-+
-+	if (!bnv->bdev->bd_disk)
-+		return -EINVAL;
-+
-+	if (!bnv->bdev->bd_disk->fops)
-+		return -EIO;
-+
-+	if (!bnv->bdev->bd_disk->fops->open)
-+		return -EIO;
-+
-+	ret = bnv->bdev->bd_disk->fops->open(bnv->bdev, FMODE_READ);
-+	if (ret)
-+		return ret;
-+
-+	mapping = bnv->bdev->bd_inode->i_mapping;
-+
-+	while (bytes_left) {
-+		folio = read_mapping_folio(mapping, f_index++, NULL);
-+		if (IS_ERR(folio)) {
-+			ret = PTR_ERR(folio);
-+			goto err_release_bdev;
-+		}
-+		to_read = min_t(unsigned long, bytes_left, PAGE_SIZE - offs);
-+		p = folio_address(folio) + offset_in_folio(folio, offs);
-+		memcpy(val, p, to_read);
-+		offs = 0;
-+		bytes_left -= to_read;
-+		val += to_read;
-+		folio_put(folio);
-+	}
-+
-+err_release_bdev:
-+	bnv->bdev->bd_disk->fops->release(bnv->bdev->bd_disk, FMODE_READ);
-+
-+	return ret;
-+}
-+
-+static int blk_nvmem_register(struct device *dev, struct class_interface *iface)
-+{
-+	struct device_node *np = dev_of_node(dev);
-+	struct block_device *bdev = dev_to_bdev(dev);
-+	struct nvmem_config config = {};
-+	struct blk_nvmem *bnv;
-+
-+	/* skip devices which do not have a device tree node */
-+	if (!np)
-+		return 0;
-+
-+	/* skip devices without an nvmem layout defined */
-+	if (!of_get_child_by_name(np, "nvmem-layout"))
-+		return 0;
-+
-+	/*
-+	 * skip devices which don't have GENHD_FL_NVMEM set
-+	 *
-+	 * This flag is used for mtdblock and ubiblock devices because
-+	 * both, MTD and UBI already implement their own NVMEM provider.
-+	 * To avoid registering multiple NVMEM providers for the same
-+	 * device node, don't register the block NVMEM provider for them.
-+	 */
-+	if (!(bdev->bd_disk->flags & GENHD_FL_NVMEM))
-+		return 0;
-+
-+	/*
-+	 * skip block device too large to be represented as NVMEM devices
-+	 * which are using an 'int' as address
-+	 */
-+	if (bdev_nr_bytes(bdev) > INT_MAX)
-+		return -EFBIG;
-+
-+	bnv = kzalloc(sizeof(struct blk_nvmem), GFP_KERNEL);
-+	if (!bnv)
-+		return -ENOMEM;
-+
-+	config.id = NVMEM_DEVID_NONE;
-+	config.dev = &bdev->bd_device;
-+	config.name = dev_name(&bdev->bd_device);
-+	config.owner = THIS_MODULE;
-+	config.priv = bnv;
-+	config.reg_read = blk_nvmem_reg_read;
-+	config.size = bdev_nr_bytes(bdev);
-+	config.word_size = 1;
-+	config.stride = 1;
-+	config.read_only = true;
-+	config.root_only = true;
-+	config.ignore_wp = true;
-+	config.of_node = to_of_node(dev->fwnode);
-+
-+	bnv->bdev = bdev;
-+	bnv->nvmem = nvmem_register(&config);
-+	if (IS_ERR(bnv->nvmem)) {
-+		dev_err_probe(&bdev->bd_device, PTR_ERR(bnv->nvmem),
-+			      "Failed to register NVMEM device\n");
-+
-+		kfree(bnv);
-+		return PTR_ERR(bnv->nvmem);
-+	}
-+
-+	mutex_lock(&devices_mutex);
-+	list_add_tail(&bnv->list, &nvmem_devices);
-+	mutex_unlock(&devices_mutex);
-+
-+	return 0;
-+}
-+
-+static void blk_nvmem_unregister(struct device *dev, struct class_interface *iface)
-+{
-+	struct block_device *bdev = dev_to_bdev(dev);
-+	struct blk_nvmem *bnv_c, *bnv = NULL;
-+
-+	mutex_lock(&devices_mutex);
-+	list_for_each_entry(bnv_c, &nvmem_devices, list) {
-+		if (bnv_c->bdev == bdev) {
-+			bnv = bnv_c;
-+			break;
-+		}
-+	}
-+
-+	if (!bnv) {
-+		mutex_unlock(&devices_mutex);
-+		return;
-+	}
-+
-+	list_del(&bnv->list);
-+	mutex_unlock(&devices_mutex);
-+	nvmem_unregister(bnv->nvmem);
-+	kfree(bnv);
-+}
-+
-+static struct class_interface blk_nvmem_bus_interface __refdata = {
-+	.class = &block_class,
-+	.add_dev = &blk_nvmem_register,
-+	.remove_dev = &blk_nvmem_unregister,
-+};
-+
-+static int __init blk_nvmem_init(void)
-+{
-+	int ret;
-+
-+	ret = class_interface_register(&blk_nvmem_bus_interface);
-+	if (ret)
-+		return ret;
-+
-+	return 0;
-+}
-+device_initcall(blk_nvmem_init);
diff --git a/target/linux/generic/pending-6.1/450-12-dt-bindings-mmc-mmc-card-add-block-device-nodes.patch b/target/linux/generic/pending-6.1/450-12-dt-bindings-mmc-mmc-card-add-block-device-nodes.patch
deleted file mode 100644
index 77c9bf91a54d..000000000000
--- a/target/linux/generic/pending-6.1/450-12-dt-bindings-mmc-mmc-card-add-block-device-nodes.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 86864bf8f40e84dc881c197ef470a88668329dbf Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 7 Aug 2023 21:21:45 +0100
-Subject: [PATCH 12/15] dt-bindings: mmc: mmc-card: add block device nodes
-
-Add nodes representing the block devices exposed by an MMC device
-including an example involving nvmem-cells.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- .../devicetree/bindings/mmc/mmc-card.yaml     | 45 +++++++++++++++++++
- 1 file changed, 45 insertions(+)
-
---- a/Documentation/devicetree/bindings/mmc/mmc-card.yaml
-+++ b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
-@@ -26,6 +26,18 @@ properties:
-       Use this to indicate that the mmc-card has a broken hpi
-       implementation, and that hpi should not be used.
- 
-+  block:
-+    $ref: /schemas/block/block-device.yaml#
-+    description:
-+      Represents the block storage provided by an SD card or the
-+      main hardware partition of an eMMC.
-+
-+patternProperties:
-+  '^boot[0-9]+':
-+    $ref: /schemas/block/block-device.yaml#
-+    description:
-+      Represents a boot hardware partition on an eMMC.
-+
- required:
-   - compatible
-   - reg
-@@ -42,6 +54,39 @@ examples:
-             compatible = "mmc-card";
-             reg = <0>;
-             broken-hpi;
-+
-+            block {
-+                partitions {
-+                    cal_data: block-partition-rf {
-+                        partnum = <3>;
-+                        partname = "rf";
-+
-+                        nvmem-layout {
-+                            compatible = "fixed-layout";
-+                            #address-cells = <1>;
-+                            #size-cells = <1>;
-+
-+                            eeprom@0 {
-+                                reg = <0x0 0x1000>;
-+                            };
-+                        };
-+                    };
-+                };
-+            };
-+
-+            boot1 {
-+                nvmem-layout {
-+                    compatible = "fixed-layout";
-+                    #address-cells = <1>;
-+                    #size-cells = <1>;
-+
-+                    macaddr: macaddr@a {
-+                        compatible = "mac-base";
-+                        reg = <0xa 0x6>;
-+                        #nvmem-cell-cells = <1>;
-+                    };
-+                };
-+            };
-         };
-     };
- 
diff --git a/target/linux/generic/pending-6.1/450-13-mmc-core-set-card-fwnode_handle.patch b/target/linux/generic/pending-6.1/450-13-mmc-core-set-card-fwnode_handle.patch
deleted file mode 100644
index fada28043797..000000000000
--- a/target/linux/generic/pending-6.1/450-13-mmc-core-set-card-fwnode_handle.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 644942a31719de674e2aa68f83d66bd8ae7e4fb7 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 13 Jul 2023 04:12:21 +0100
-Subject: [PATCH 13/15] mmc: core: set card fwnode_handle
-
-Set fwnode in case it isn't set yet and of_node is present.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mmc/core/bus.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mmc/core/bus.c
-+++ b/drivers/mmc/core/bus.c
-@@ -363,6 +363,8 @@ int mmc_add_card(struct mmc_card *card)
- 	mmc_add_card_debugfs(card);
- #endif
- 	card->dev.of_node = mmc_of_find_child_device(card->host, 0);
-+	if (card->dev.of_node && !card->dev.fwnode)
-+		card->dev.fwnode = &card->dev.of_node->fwnode;
- 
- 	device_enable_async_suspend(&card->dev);
- 
diff --git a/target/linux/generic/pending-6.1/450-14-mmc-block-set-fwnode-of-disk-devices.patch b/target/linux/generic/pending-6.1/450-14-mmc-block-set-fwnode-of-disk-devices.patch
deleted file mode 100644
index 386282459b1e..000000000000
--- a/target/linux/generic/pending-6.1/450-14-mmc-block-set-fwnode-of-disk-devices.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From d9143f86330dd038fc48878558dd287ceee5d3d4 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 13 Jul 2023 04:13:04 +0100
-Subject: [PATCH 14/15] mmc: block: set fwnode of disk devices
-
-Set fwnode of disk devices to 'block', 'boot0' and 'boot1' subnodes of
-the mmc-card. This is done in preparation for having the eMMC act as
-NVMEM provider.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mmc/core/block.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mmc/core/block.c
-+++ b/drivers/mmc/core/block.c
-@@ -2486,6 +2486,8 @@ static struct mmc_blk_data *mmc_blk_allo
- 					      int area_type,
- 					      unsigned int part_type)
- {
-+	struct fwnode_handle *fwnode;
-+	struct device *ddev;
- 	struct mmc_blk_data *md;
- 	int devidx, ret;
- 	char cap_str[10];
-@@ -2582,6 +2584,13 @@ static struct mmc_blk_data *mmc_blk_allo
- 
- 	blk_queue_write_cache(md->queue.queue, cache_enabled, fua_enabled);
- 
-+	ddev = disk_to_dev(md->disk);
-+	fwnode = device_get_named_child_node(subname ? md->parent->parent :
-+						       md->parent,
-+					     subname ? subname : "block");
-+	if (fwnode)
-+		device_set_node(ddev, fwnode);
-+
- 	string_get_size((u64)size, 512, STRING_UNITS_2,
- 			cap_str, sizeof(cap_str));
- 	pr_info("%s: %s %s %s %s\n",
diff --git a/target/linux/generic/pending-6.1/450-15-mmc-block-set-GENHD_FL_NVMEM.patch b/target/linux/generic/pending-6.1/450-15-mmc-block-set-GENHD_FL_NVMEM.patch
deleted file mode 100644
index 41c257cdeb27..000000000000
--- a/target/linux/generic/pending-6.1/450-15-mmc-block-set-GENHD_FL_NVMEM.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 322035ab2b0113d98b6c0ea788d971e0df2952a4 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 20 Jul 2023 17:36:44 +0100
-Subject: [PATCH 15/15] mmc: block: set GENHD_FL_NVMEM
-
-Set flag to consider MMC block devices as NVMEM providers.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mmc/core/block.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mmc/core/block.c
-+++ b/drivers/mmc/core/block.c
-@@ -2540,6 +2540,7 @@ static struct mmc_blk_data *mmc_blk_allo
- 	md->disk->major	= MMC_BLOCK_MAJOR;
- 	md->disk->minors = perdev_minors;
- 	md->disk->first_minor = devidx * perdev_minors;
-+	md->disk->flags = GENHD_FL_NVMEM;
- 	md->disk->fops = &mmc_bdops;
- 	md->disk->private_data = md;
- 	md->parent = parent;
diff --git a/target/linux/generic/pending-6.1/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-6.1/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
deleted file mode 100644
index 1b653fb735c9..000000000000
--- a/target/linux/generic/pending-6.1/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: disable cfi cmdset 0002 erase suspend
-
-on some platforms, erase suspend leads to data corruption and lockups when write
-ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
-rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
-simply disable erase suspend, as it will usually not produce any useful gain on
-the small filesystems used on embedded hardware.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -908,7 +908,7 @@ static int get_chip(struct map_info *map
- 		return 0;
- 
- 	case FL_ERASING:
--		if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
-+		if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
- 		    !(mode == FL_READY || mode == FL_POINT ||
- 		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
- 			goto sleep;
diff --git a/target/linux/generic/pending-6.1/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-6.1/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
deleted file mode 100644
index f2788c521408..000000000000
--- a/target/linux/generic/pending-6.1/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-From: George Kashperko <george@znau.edu.ua>
-Subject: Issue map read after Write Buffer Load command to ensure chip is ready to receive data.
-
-Signed-off-by: George Kashperko <george@znau.edu.ua>
----
- drivers/mtd/chips/cfi_cmdset_0002.c |    1 +
- 1 file changed, 1 insertion(+)
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -2052,6 +2052,7 @@ static int __xipram do_write_buffer(stru
- 
- 	/* Write Buffer Load */
- 	map_write(map, CMD(0x25), cmd_adr);
-+	(void) map_read(map, cmd_adr);
- 
- 	chip->state = FL_WRITING_TO_BUFFER;
- 
diff --git a/target/linux/generic/pending-6.1/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/pending-6.1/465-m25p80-mx-disable-software-protection.patch
deleted file mode 100644
index 1e280773381c..000000000000
--- a/target/linux/generic/pending-6.1/465-m25p80-mx-disable-software-protection.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Disable software protection bits for Macronix flashes.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/macronix.c
-+++ b/drivers/mtd/spi-nor/macronix.c
-@@ -106,6 +106,7 @@ static void macronix_nor_default_init(st
- {
- 	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
- 	nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
-+	nor->flags |= SNOR_F_HAS_LOCK;
- }
- 
- static const struct spi_nor_fixups macronix_nor_fixups = {
diff --git a/target/linux/generic/pending-6.1/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/pending-6.1/476-mtd-spi-nor-add-eon-en25q128.patch
deleted file mode 100644
index 303e488433a0..000000000000
--- a/target/linux/generic/pending-6.1/476-mtd-spi-nor-add-eon-en25q128.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From: Piotr Dymacz <pepe2k@gmail.com>
-Subject: kernel/mtd: add support for EON EN25Q128
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/eon.c
-+++ b/drivers/mtd/spi-nor/eon.c
-@@ -17,6 +17,8 @@ static const struct flash_info eon_nor_p
- 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128) },
- 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128)
- 		NO_SFDP_FLAGS(SECT_4K) },
-+	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256)
-+		NO_SFDP_FLAGS(SECT_4K) },
- 	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16)
- 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
- 	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32)
diff --git a/target/linux/generic/pending-6.1/477-mtd-spi-nor-add-eon-en25qx128a.patch b/target/linux/generic/pending-6.1/477-mtd-spi-nor-add-eon-en25qx128a.patch
deleted file mode 100644
index 6740d1d7beb9..000000000000
--- a/target/linux/generic/pending-6.1/477-mtd-spi-nor-add-eon-en25qx128a.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Christian Marangi <ansuelsmth@gmail.com>
-Subject: kernel/mtd: add support for EON EN25QX128A
-
-Add support for EON EN25QX128A with no flags as it does
-support SFDP parsing.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/eon.c
-+++ b/drivers/mtd/spi-nor/eon.c
-@@ -19,6 +19,7 @@ static const struct flash_info eon_nor_p
- 		NO_SFDP_FLAGS(SECT_4K) },
- 	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256)
- 		NO_SFDP_FLAGS(SECT_4K) },
-+	{ "en25qx128a", INFO(0x1c7118, 0, 64 * 1024, 256) },
- 	{ "en25q80a",   INFO(0x1c3014, 0, 64 * 1024,   16)
- 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ) },
- 	{ "en25qh16",   INFO(0x1c7015, 0, 64 * 1024,   32)
diff --git a/target/linux/generic/pending-6.1/479-mtd-spi-nor-add-xtx-xt25f128b.patch b/target/linux/generic/pending-6.1/479-mtd-spi-nor-add-xtx-xt25f128b.patch
deleted file mode 100644
index 371f1a727694..000000000000
--- a/target/linux/generic/pending-6.1/479-mtd-spi-nor-add-xtx-xt25f128b.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From patchwork Thu Feb  6 17:19:41 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 1234465
-Date: Thu, 6 Feb 2020 19:19:41 +0200
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-mtd@lists.infradead.org
-Subject: [PATCH v2] mtd: spi-nor: Add support for xt25f128b chip
-Message-ID: <20200206171941.GA2398@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-List-Subscribe: <http://lists.infradead.org/mailman/listinfo/linux-mtd>,
- <mailto:linux-mtd-request@lists.infradead.org?subject=subscribe>
-Cc: Eitan Cohen <eitan@neot-semadar.com>, Piotr Dymacz <pepe2k@gmail.com>,
- Tudor Ambarus <tudor.ambarus@microchip.com>
-Sender: "linux-mtd" <linux-mtd-bounces@lists.infradead.org>
-Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org
-
-Add XT25F128B made by XTX Technology (Shenzhen) Limited.
-This chip supports dual and quad read and uniform 4K-byte erase.
-Verified on Teltonika RUT955 which comes with XT25F128B in recent
-versions of the device.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/spi-nor/Makefile
-+++ b/drivers/mtd/spi-nor/Makefile
-@@ -17,6 +17,7 @@ spi-nor-objs			+= sst.o
- spi-nor-objs			+= winbond.o
- spi-nor-objs			+= xilinx.o
- spi-nor-objs			+= xmc.o
-+spi-nor-objs			+= xtx.o
- spi-nor-$(CONFIG_DEBUG_FS)	+= debugfs.o
- obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
- 
---- /dev/null
-+++ b/drivers/mtd/spi-nor/xtx.c
-@@ -0,0 +1,17 @@
-+// SPDX-License-Identifier: GPL-2.0
-+#include <linux/mtd/spi-nor.h>
-+
-+#include "core.h"
-+
-+static const struct flash_info xtx_parts[] = {
-+	/* XTX Technology (Shenzhen) Limited */
-+	{ "xt25f128b", INFO(0x0B4018, 0, 64 * 1024, 256)
-+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-+			      SPI_NOR_QUAD_READ) },
-+};
-+
-+const struct spi_nor_manufacturer spi_nor_xtx = {
-+	.name = "xtx",
-+	.parts = xtx_parts,
-+	.nparts = ARRAY_SIZE(xtx_parts),
-+};
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -1636,6 +1636,7 @@ static const struct spi_nor_manufacturer
- 	&spi_nor_winbond,
- 	&spi_nor_xilinx,
- 	&spi_nor_xmc,
-+	&spi_nor_xtx,
- };
- 
- static const struct flash_info spi_nor_generic_flash = {
---- a/drivers/mtd/spi-nor/core.h
-+++ b/drivers/mtd/spi-nor/core.h
-@@ -633,6 +633,7 @@ extern const struct spi_nor_manufacturer
- extern const struct spi_nor_manufacturer spi_nor_winbond;
- extern const struct spi_nor_manufacturer spi_nor_xilinx;
- extern const struct spi_nor_manufacturer spi_nor_xmc;
-+extern const struct spi_nor_manufacturer spi_nor_xtx;
- 
- extern const struct attribute_group *spi_nor_sysfs_groups[];
- 
diff --git a/target/linux/generic/pending-6.1/481-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch b/target/linux/generic/pending-6.1/481-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch
deleted file mode 100644
index 581e06190b5a..000000000000
--- a/target/linux/generic/pending-6.1/481-mtd-spi-nor-add-support-for-Gigadevice-GD25D05.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From d68b4aa22e8c625685bfad642dd7337948dc0ad1 Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Date: Mon, 6 Jan 2020 13:07:56 +0100
-Subject: [PATCH] mtd: spi-nor: add support for Gigadevice GD25D05
-
-Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/spi-nor/gigadevice.c
-+++ b/drivers/mtd/spi-nor/gigadevice.c
-@@ -34,6 +34,10 @@ static const struct spi_nor_fixups gd25q
- };
- 
- static const struct flash_info gigadevice_nor_parts[] = {
-+	{ "gd25q05", INFO(0xc84010, 0, 64 * 1024,  1)
-+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) 
-+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-+			      SPI_NOR_QUAD_READ) },
- 	{ "gd25q16", INFO(0xc84015, 0, 64 * 1024,  32)
- 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
diff --git a/target/linux/generic/pending-6.1/482-mtd-spi-nor-add-gd25q512.patch b/target/linux/generic/pending-6.1/482-mtd-spi-nor-add-gd25q512.patch
deleted file mode 100644
index ddd3405ae71d..000000000000
--- a/target/linux/generic/pending-6.1/482-mtd-spi-nor-add-gd25q512.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From f8943df3beb0d3f9754bb35320c3a378727175a8 Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Thu, 14 Jul 2022 08:38:07 +0200
-Subject: [PATCH] spi-nor/gigadevic: add gd25q512
-
----
- drivers/mtd/spi-nor/gigadevice.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/mtd/spi-nor/gigadevice.c
-+++ b/drivers/mtd/spi-nor/gigadevice.c
-@@ -71,6 +71,11 @@ static const struct flash_info gigadevic
- 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
- 		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
- 		.fixups = &gd25q256_fixups },
-+	{ "gd25q512", INFO(0xc84020, 0, 64 * 1024, 1024)
-+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+		FIXUP_FLAGS(SPI_NOR_4B_OPCODES)
-+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-+			      SPI_NOR_QUAD_READ) },
- };
- 
- const struct spi_nor_manufacturer spi_nor_gigadevice = {
diff --git a/target/linux/generic/pending-6.1/484-mtd-spi-nor-add-esmt-f25l16pa.patch b/target/linux/generic/pending-6.1/484-mtd-spi-nor-add-esmt-f25l16pa.patch
deleted file mode 100644
index d5ebe2030973..000000000000
--- a/target/linux/generic/pending-6.1/484-mtd-spi-nor-add-esmt-f25l16pa.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 87363cc0e522de3294ea6ae10fb468d2a8d6fb2f Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 12:17:21 +0200
-Subject: [PATCH] spi-nor/esmt.c: add esmt f25l16pa
-
-This fixes support for Dongwon T&I DW02-412H which uses F25L16PA(2S)
-flash.
-
----
- drivers/mtd/spi-nor/esmt.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mtd/spi-nor/esmt.c
-+++ b/drivers/mtd/spi-nor/esmt.c
-@@ -10,6 +10,9 @@
- 
- static const struct flash_info esmt_nor_parts[] = {
- 	/* ESMT */
-+	{ "f25l16pa-2s", INFO(0x8c2115, 0, 64 * 1024, 32)
-+			FLAGS(SPI_NOR_HAS_LOCK)
-+			NO_SFDP_FLAGS(SECT_4K) },
- 	{ "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64)
- 		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_SWP_IS_VOLATILE)
- 		NO_SFDP_FLAGS(SECT_4K) },
diff --git a/target/linux/generic/pending-6.1/485-mtd-spi-nor-add-xmc-xm25qh128c.patch b/target/linux/generic/pending-6.1/485-mtd-spi-nor-add-xmc-xm25qh128c.patch
deleted file mode 100644
index e8583cc2571a..000000000000
--- a/target/linux/generic/pending-6.1/485-mtd-spi-nor-add-xmc-xm25qh128c.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From f6b33d850f7f12555df2fa0e3349b33427bf5890 Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 12:19:01 +0200
-Subject: [PATCH] spi-nor/xmc.c: add xm25qh128c
-
-The XMC XM25QH128C is a 16MB SPI NOR chip. The patch is verified on
-Ruijie RG-EW3200GX PRO.
-Datasheet available at https://www.xmcwh.com/uploads/435/XM25QH128C.pdf
-
----
- drivers/mtd/spi-nor/xmc.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mtd/spi-nor/xmc.c
-+++ b/drivers/mtd/spi-nor/xmc.c
-@@ -16,6 +16,9 @@ static const struct flash_info xmc_nor_p
- 	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256)
- 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
- 			      SPI_NOR_QUAD_READ) },
-+	{ "XM25QH128C", INFO(0x204018, 0, 64 * 1024, 256)
-+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-+			      SPI_NOR_QUAD_READ) },
- };
- 
- const struct spi_nor_manufacturer spi_nor_xmc = {
diff --git a/target/linux/generic/pending-6.1/486-01-mtd-spinand-add-support-for-ESMT-F50x1G41LB.patch b/target/linux/generic/pending-6.1/486-01-mtd-spinand-add-support-for-ESMT-F50x1G41LB.patch
deleted file mode 100644
index b8116db84205..000000000000
--- a/target/linux/generic/pending-6.1/486-01-mtd-spinand-add-support-for-ESMT-F50x1G41LB.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From a43b844cb40bf1b783055fdc81b7f991e21e7e76 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Wed, 13 Apr 2022 11:58:17 +0800
-Subject: [PATCH] mtd: spinand: add support for ESMT F50x1G41LB
-
-This patch adds support for ESMT F50L1G41LB and F50D1G41LB.
-It seems that ESMT likes to use random JEDEC ID from other vendors.
-Their 1G chips uses 0xc8 from GigaDevice and 2G/4G chips uses 0x2c from
-Micron. For this reason, the ESMT entry is named esmt_c8 with explicit
-JEDEC ID in variable name.
-
-Datasheets:
-https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F50L1G41LB(2M).pdf
-https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F50D1G41LB(2M).pdf
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
----
- drivers/mtd/nand/spi/Makefile |  2 +-
- drivers/mtd/nand/spi/core.c   |  1 +
- drivers/mtd/nand/spi/esmt.c   | 89 +++++++++++++++++++++++++++++++++++
- include/linux/mtd/spinand.h   |  1 +
- 4 files changed, 92 insertions(+), 1 deletion(-)
- create mode 100644 drivers/mtd/nand/spi/esmt.c
-
---- a/drivers/mtd/nand/spi/Makefile
-+++ b/drivers/mtd/nand/spi/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--spinand-objs := core.o ato.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
-+spinand-objs := core.o ato.o esmt.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
- obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -938,6 +938,7 @@ static const struct nand_ops spinand_ops
- 
- static const struct spinand_manufacturer *spinand_manufacturers[] = {
- 	&ato_spinand_manufacturer,
-+	&esmt_c8_spinand_manufacturer,
- 	&gigadevice_spinand_manufacturer,
- 	&macronix_spinand_manufacturer,
- 	&micron_spinand_manufacturer,
---- /dev/null
-+++ b/drivers/mtd/nand/spi/esmt.c
-@@ -0,0 +1,89 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Author:
-+ *	Chuanhong Guo <gch981213@gmail.com>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/spinand.h>
-+
-+/* ESMT uses GigaDevice 0xc8 JECDEC ID on some SPI NANDs */
-+#define SPINAND_MFR_ESMT_C8			0xc8
-+
-+static SPINAND_OP_VARIANTS(read_cache_variants,
-+			   SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
-+			   SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+			   SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
-+			   SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+			   SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+			   SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(write_cache_variants,
-+			   SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
-+			   SPINAND_PROG_LOAD(true, 0, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(update_cache_variants,
-+			   SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
-+			   SPINAND_PROG_LOAD(false, 0, NULL, 0));
-+
-+static int f50l1g41lb_ooblayout_ecc(struct mtd_info *mtd, int section,
-+				    struct mtd_oob_region *region)
-+{
-+	if (section > 3)
-+		return -ERANGE;
-+
-+	region->offset = 16 * section + 8;
-+	region->length = 8;
-+
-+	return 0;
-+}
-+
-+static int f50l1g41lb_ooblayout_free(struct mtd_info *mtd, int section,
-+				     struct mtd_oob_region *region)
-+{
-+	if (section > 3)
-+		return -ERANGE;
-+
-+	region->offset = 16 * section + 2;
-+	region->length = 6;
-+
-+	return 0;
-+}
-+
-+static const struct mtd_ooblayout_ops f50l1g41lb_ooblayout = {
-+	.ecc = f50l1g41lb_ooblayout_ecc,
-+	.free = f50l1g41lb_ooblayout_free,
-+};
-+
-+static const struct spinand_info esmt_c8_spinand_table[] = {
-+	SPINAND_INFO("F50L1G41LB",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x01),
-+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
-+		     NAND_ECCREQ(1, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     0,
-+		     SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)),
-+	SPINAND_INFO("F50D1G41LB",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x11),
-+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
-+		     NAND_ECCREQ(1, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     0,
-+		     SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)),
-+};
-+
-+static const struct spinand_manufacturer_ops esmt_spinand_manuf_ops = {
-+};
-+
-+const struct spinand_manufacturer esmt_c8_spinand_manufacturer = {
-+	.id = SPINAND_MFR_ESMT_C8,
-+	.name = "ESMT",
-+	.chips = esmt_c8_spinand_table,
-+	.nchips = ARRAY_SIZE(esmt_c8_spinand_table),
-+	.ops = &esmt_spinand_manuf_ops,
-+};
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -261,6 +261,7 @@ struct spinand_manufacturer {
- 
- /* SPI NAND manufacturers */
- extern const struct spinand_manufacturer ato_spinand_manufacturer;
-+extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
- extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
- extern const struct spinand_manufacturer macronix_spinand_manufacturer;
- extern const struct spinand_manufacturer micron_spinand_manufacturer;
diff --git a/target/linux/generic/pending-6.1/487-mtd-spinand-Add-support-for-Etron-EM73D044VCx.patch b/target/linux/generic/pending-6.1/487-mtd-spinand-Add-support-for-Etron-EM73D044VCx.patch
deleted file mode 100644
index 81378fba868f..000000000000
--- a/target/linux/generic/pending-6.1/487-mtd-spinand-Add-support-for-Etron-EM73D044VCx.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From f32085fc0b87049491b07e198d924d738a1a2834 Mon Sep 17 00:00:00 2001
-From: Daniel Danzberger <daniel@dd-wrt.com>
-Date: Wed, 3 Aug 2022 17:31:03 +0200
-Subject: [PATCH] mtd: spinand: Add support for Etron EM73D044VCx
-
-Airoha is a new ARM platform based on Cortex-A53 which has recently been
-merged into linux-next.
-
-Due to BootROM limitations on this platform, the Cortex-A53 can't run in
-Aarch64 mode and code must be compiled for 32-Bit ARM.
-
-This support is based mostly on those linux-next commits backported
-for kernel 5.15.
-
-Patches:
-1 - platform support = linux-next
-2 - clock driver = linux-next
-3 - gpio driver = linux-next
-4 - linux,usable-memory-range dts support = linux-next
-5 - mtd spinand driver
-6 - spi driver
-7 - pci driver (kconfig only, uses mediatek PCI) = linux-next
-
-Still missing:
-- Ethernet driver
-- Sysupgrade support
-
-A.t.m there exists one subtarget EN7523 with only one evaluation
-board.
-
-The initramfs can be run with the following commands from u-boot:
--
-u-boot> setenv bootfile \
-	openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin
-u-boot> tftpboot
-u-boot> bootm 0x81800000
--
-
-Submitted-by: Daniel Danzberger <daniel@dd-wrt.com>
-
---- a/drivers/mtd/nand/spi/Makefile
-+++ b/drivers/mtd/nand/spi/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--spinand-objs := core.o ato.o esmt.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
-+spinand-objs := core.o ato.o esmt.o etron.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
- obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -939,6 +939,7 @@ static const struct nand_ops spinand_ops
- static const struct spinand_manufacturer *spinand_manufacturers[] = {
- 	&ato_spinand_manufacturer,
- 	&esmt_c8_spinand_manufacturer,
-+	&etron_spinand_manufacturer,
- 	&gigadevice_spinand_manufacturer,
- 	&macronix_spinand_manufacturer,
- 	&micron_spinand_manufacturer,
---- /dev/null
-+++ b/drivers/mtd/nand/spi/etron.c
-@@ -0,0 +1,98 @@
-+// SPDX-License-Identifier: GPL-2.0
-+
-+#include <linux/device.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/spinand.h>
-+
-+#define SPINAND_MFR_ETRON			0xd5
-+
-+
-+static SPINAND_OP_VARIANTS(read_cache_variants,
-+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(write_cache_variants,
-+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
-+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(update_cache_variants,
-+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
-+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
-+
-+static int etron_ooblayout_ecc(struct mtd_info *mtd, int section,
-+					struct mtd_oob_region *oobregion)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	oobregion->offset = 72;
-+	oobregion->length = 56;
-+
-+	return 0;
-+}
-+
-+static int etron_ooblayout_free(struct mtd_info *mtd, int section,
-+			   struct mtd_oob_region *oobregion)
-+{
-+	if (section)
-+		return -ERANGE;
-+
-+	oobregion->offset = 1;
-+	oobregion->length = 71;
-+
-+	return 0;
-+}
-+
-+static int etron_ecc_get_status(struct spinand_device *spinand, u8 status)
-+{
-+	switch (status & STATUS_ECC_MASK) {
-+	case STATUS_ECC_NO_BITFLIPS:
-+		return 0;
-+
-+	case STATUS_ECC_HAS_BITFLIPS:
-+		/* Between 1-7 bitflips were corrected */
-+		return 7;
-+
-+	case STATUS_ECC_MASK:
-+		/* Maximum bitflips were corrected */
-+		return 8;
-+
-+	case STATUS_ECC_UNCOR_ERROR:
-+		return -EBADMSG;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+static const struct mtd_ooblayout_ops etron_ooblayout = {
-+	.ecc = etron_ooblayout_ecc,
-+	.free = etron_ooblayout_free,
-+};
-+
-+static const struct spinand_info etron_spinand_table[] = {
-+	SPINAND_INFO("EM73D044VCx",
-+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x1f),
-+		     // bpc, pagesize, oobsize, pagesperblock, bperlun, maxbadplun, ppl, lpt, #t
-+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
-+		     NAND_ECCREQ(8, 512),
-+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+					      &write_cache_variants,
-+					      &update_cache_variants),
-+		     SPINAND_HAS_QE_BIT,
-+		     SPINAND_ECCINFO(&etron_ooblayout, etron_ecc_get_status)),
-+};
-+
-+static const struct spinand_manufacturer_ops etron_spinand_manuf_ops = {
-+};
-+
-+const struct spinand_manufacturer etron_spinand_manufacturer = {
-+	.id = SPINAND_MFR_ETRON,
-+	.name = "Etron",
-+	.chips = etron_spinand_table,
-+	.nchips = ARRAY_SIZE(etron_spinand_table),
-+	.ops = &etron_spinand_manuf_ops,
-+};
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -262,6 +262,7 @@ struct spinand_manufacturer {
- /* SPI NAND manufacturers */
- extern const struct spinand_manufacturer ato_spinand_manufacturer;
- extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
-+extern const struct spinand_manufacturer etron_spinand_manufacturer;
- extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
- extern const struct spinand_manufacturer macronix_spinand_manufacturer;
- extern const struct spinand_manufacturer micron_spinand_manufacturer;
diff --git a/target/linux/generic/pending-6.1/488-mtd-spi-nor-add-xmc-xm25qh64c.patch b/target/linux/generic/pending-6.1/488-mtd-spi-nor-add-xmc-xm25qh64c.patch
deleted file mode 100644
index e1e4f25e1192..000000000000
--- a/target/linux/generic/pending-6.1/488-mtd-spi-nor-add-xmc-xm25qh64c.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: Joe Mullally <jwmullally@gmail.com>
-Subject: mtd/spi-nor/xmc: add support for XMC XM25QH64C
-
-The XMC XM25QH64C is a 8MB SPI NOR chip. The patch is verified on TL-WPA8631P v3.
-Datasheet available at https://www.xmcwh.com/uploads/442/XM25QH64C.pdf
-
-Signed-off-by: Joe Mullally <jwmullally@gmail.com>
----
- drivers/mtd/spi-nor/xmc.c                             | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mtd/spi-nor/xmc.c
-+++ b/drivers/mtd/spi-nor/xmc.c
-@@ -13,6 +13,9 @@ static const struct flash_info xmc_nor_p
- 	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128)
- 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
- 			      SPI_NOR_QUAD_READ) },
-+	{ "XM25QH64C", INFO(0x204017, 0, 64 * 1024, 128)
-+		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
-+			      SPI_NOR_QUAD_READ) },
- 	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256)
- 		NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
- 			      SPI_NOR_QUAD_READ) },
diff --git a/target/linux/generic/pending-6.1/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/pending-6.1/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
deleted file mode 100644
index 2eccb9d3bbb5..000000000000
--- a/target/linux/generic/pending-6.1/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -1263,6 +1263,74 @@ static struct mtd_notifier ubi_mtd_notif
- 	.remove = ubi_notify_remove,
- };
- 
-+
-+/*
-+ * This function tries attaching mtd partitions named either "ubi" or "data"
-+ * during boot.
-+ */
-+static void __init ubi_auto_attach(void)
-+{
-+	int err;
-+	struct mtd_info *mtd;
-+	loff_t offset = 0;
-+	size_t len;
-+	char magic[4];
-+
-+	/* try attaching mtd device named "ubi" or "data" */
-+	mtd = open_mtd_device("ubi");
-+	if (IS_ERR(mtd))
-+		mtd = open_mtd_device("data");
-+
-+	if (IS_ERR(mtd))
-+		return;
-+
-+	/* get the first not bad block */
-+	if (mtd_can_have_bb(mtd))
-+		while (mtd_block_isbad(mtd, offset)) {
-+			offset += mtd->erasesize;
-+
-+			if (offset > mtd->size) {
-+				pr_err("UBI error: Failed to find a non-bad "
-+				       "block on mtd%d\n", mtd->index);
-+				goto cleanup;
-+			}
-+		}
-+
-+	/* check if the read from flash was successful */
-+	err = mtd_read(mtd, offset, 4, &len, (void *) magic);
-+	if ((err && !mtd_is_bitflip(err)) || len != 4) {
-+		pr_err("UBI error: unable to read from mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* check for a valid ubi magic */
-+	if (strncmp(magic, "UBI#", 4)) {
-+		pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	/* don't auto-add media types where UBI doesn't makes sense */
-+	if (mtd->type != MTD_NANDFLASH &&
-+	    mtd->type != MTD_NORFLASH &&
-+	    mtd->type != MTD_DATAFLASH &&
-+	    mtd->type != MTD_MLCNANDFLASH)
-+		goto cleanup;
-+
-+	mutex_lock(&ubi_devices_mutex);
-+	pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
-+	err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0, false);
-+	mutex_unlock(&ubi_devices_mutex);
-+	if (err < 0) {
-+		pr_err("UBI error: cannot attach mtd%d\n", mtd->index);
-+		goto cleanup;
-+	}
-+
-+	return;
-+
-+cleanup:
-+	put_mtd_device(mtd);
-+}
-+
- static int __init ubi_init_attach(void)
- {
- 	int err, i, k;
-@@ -1313,6 +1381,12 @@ static int __init ubi_init_attach(void)
- 		}
- 	}
- 
-+	/* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
-+	 * parameter was given */
-+	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    !ubi_is_module() && !mtd_devs)
-+		ubi_auto_attach();
-+
- 	return 0;
- 
- out_detach:
diff --git a/target/linux/generic/pending-6.1/491-ubi-auto-create-ubiblock-device-for-rootfs.patch b/target/linux/generic/pending-6.1/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
deleted file mode 100644
index f0ea8e8cb545..000000000000
--- a/target/linux/generic/pending-6.1/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-create ubiblock device for rootfs
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -644,10 +644,47 @@ match_volume_desc(struct ubi_volume_info
- 	return true;
- }
- 
-+#define UBIFS_NODE_MAGIC  0x06101831
-+static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc)
-+{
-+	int ret;
-+	uint32_t magic_of, magic;
-+	ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4);
-+	if (ret)
-+		return 0;
-+	magic = le32_to_cpu(magic_of);
-+	return magic == UBIFS_NODE_MAGIC;
-+}
-+
-+static void ubiblock_create_auto_rootfs(struct ubi_volume_info *vi)
-+{
-+	int ret, is_ubifs;
-+	struct ubi_volume_desc *desc;
-+
-+	if (strcmp(vi->name, "rootfs") &&
-+	    strcmp(vi->name, "fit"))
-+		return;
-+
-+	desc = ubi_open_volume(vi->ubi_num, vi->vol_id, UBI_READONLY);
-+	if (IS_ERR(desc))
-+		return;
-+
-+	is_ubifs = ubi_vol_is_ubifs(desc);
-+	ubi_close_volume(desc);
-+	if (is_ubifs)
-+		return;
-+
-+	ret = ubiblock_create(vi);
-+	if (ret)
-+		pr_err("UBI error: block: can't add '%s' volume, err=%d\n",
-+			vi->name, ret);
-+}
-+
- static void
- ubiblock_create_from_param(struct ubi_volume_info *vi)
- {
- 	int i, ret = 0;
-+	bool got_param = false;
- 	struct ubiblock_param *p;
- 
- 	/*
-@@ -660,6 +697,7 @@ ubiblock_create_from_param(struct ubi_vo
- 		if (!match_volume_desc(vi, p->name, p->ubi_num, p->vol_id))
- 			continue;
- 
-+		got_param = true;
- 		ret = ubiblock_create(vi);
- 		if (ret) {
- 			pr_err(
-@@ -668,6 +706,10 @@ ubiblock_create_from_param(struct ubi_vo
- 		}
- 		break;
- 	}
-+
-+	/* auto-attach "rootfs" volume if existing and non-ubifs */
-+	if (!got_param && IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV))
-+		ubiblock_create_auto_rootfs(vi);
- }
- 
- static int ubiblock_notify(struct notifier_block *nb,
diff --git a/target/linux/generic/pending-6.1/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch b/target/linux/generic/pending-6.1/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
deleted file mode 100644
index f95ec46f14eb..000000000000
--- a/target/linux/generic/pending-6.1/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: try auto-mounting ubi0:rootfs in init/do_mounts.c
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- init/do_mounts.c | 26 +++++++++++++++++++++++++-
- 1 file changed, 25 insertions(+), 1 deletion(-)
-
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -446,7 +446,30 @@ retry:
- out:
- 	put_page(page);
- }
-- 
-+
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+static int __init mount_ubi_rootfs(void)
-+{
-+	int flags = MS_SILENT;
-+	int err, tried = 0;
-+
-+	while (tried < 2) {
-+		err = do_mount_root("ubi0:rootfs", "ubifs", flags, \
-+					root_mount_data);
-+		switch (err) {
-+			case -EACCES:
-+				flags |= MS_RDONLY;
-+				tried++;
-+				break;
-+			default:
-+				return err;
-+		}
-+	}
-+
-+	return -EINVAL;
-+}
-+#endif
-+
- #ifdef CONFIG_ROOT_NFS
- 
- #define NFSROOT_TIMEOUT_MIN	5
-@@ -579,6 +602,10 @@ void __init mount_root(void)
- 		return;
- 	}
- #endif
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+	if (!mount_ubi_rootfs())
-+		return;
-+#endif
- 	if (ROOT_DEV == 0 && root_device_name && root_fs_names) {
- 		if (mount_nodev_root() == 0)
- 			return;
diff --git a/target/linux/generic/pending-6.1/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch b/target/linux/generic/pending-6.1/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
deleted file mode 100644
index 5357c7e15d7b..000000000000
--- a/target/linux/generic/pending-6.1/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: set ROOT_DEV to ubiblock "rootfs" if unset
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -43,6 +43,7 @@
- #include <linux/scatterlist.h>
- #include <linux/idr.h>
- #include <asm/div64.h>
-+#include <linux/root_dev.h>
- 
- #include "ubi-media.h"
- #include "ubi.h"
-@@ -460,6 +461,15 @@ int ubiblock_create(struct ubi_volume_in
- 	dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
- 		 dev->ubi_num, dev->vol_id, vi->name);
- 	mutex_unlock(&devices_mutex);
-+
-+	if (!strcmp(vi->name, "rootfs") &&
-+	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+	    ROOT_DEV == 0) {
-+		pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n",
-+			  dev->ubi_num, dev->vol_id, vi->name);
-+		ROOT_DEV = MKDEV(gd->major, gd->first_minor);
-+	}
-+
- 	return 0;
- 
- out_destroy_wq:
diff --git a/target/linux/generic/pending-6.1/494-mtd-ubi-add-EOF-marker-support.patch b/target/linux/generic/pending-6.1/494-mtd-ubi-add-EOF-marker-support.patch
deleted file mode 100644
index fc481462212c..000000000000
--- a/target/linux/generic/pending-6.1/494-mtd-ubi-add-EOF-marker-support.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add EOF marker support to the UBI layer
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/ubi/attach.c | 25 ++++++++++++++++++++++---
- drivers/mtd/ubi/ubi.h    |  1 +
- 2 files changed, 23 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -926,6 +926,13 @@ static bool vol_ignored(int vol_id)
- #endif
- }
- 
-+static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech)
-+{
-+	return ech->padding1[0] == 'E' &&
-+	       ech->padding1[1] == 'O' &&
-+	       ech->padding1[2] == 'F';
-+}
-+
- /**
-  * scan_peb - scan and process UBI headers of a PEB.
-  * @ubi: UBI device description object
-@@ -958,9 +965,21 @@ static int scan_peb(struct ubi_device *u
- 		return 0;
- 	}
- 
--	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
--	if (err < 0)
--		return err;
-+	if (!ai->eof_found) {
-+		err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-+		if (err < 0)
-+			return err;
-+
-+		if (ec_hdr_has_eof(ech)) {
-+			pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n",
-+				pnum);
-+			ai->eof_found = true;
-+		}
-+	}
-+
-+	if (ai->eof_found)
-+		err = UBI_IO_FF_BITFLIPS;
-+
- 	switch (err) {
- 	case 0:
- 		break;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -780,6 +780,7 @@ struct ubi_attach_info {
- 	int mean_ec;
- 	uint64_t ec_sum;
- 	int ec_count;
-+	bool eof_found;
- 	struct kmem_cache *aeb_slab_cache;
- 	struct ubi_ec_hdr *ech;
- 	struct ubi_vid_io_buf *vidb;
diff --git a/target/linux/generic/pending-6.1/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch b/target/linux/generic/pending-6.1/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
deleted file mode 100644
index 01f3b9ec2da0..000000000000
--- a/target/linux/generic/pending-6.1/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 5734c6669fba7ddb5ef491ccff7159d15dba0b59 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Wed, 5 Sep 2018 01:32:51 +0200
-Subject: [PATCH 496/497] dt-bindings: add bindings for mtd-concat devices
-
-Document virtual mtd-concat device bindings.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- .../devicetree/bindings/mtd/mtd-concat.txt    | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/mtd-concat.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/mtd-concat.txt
-@@ -0,0 +1,36 @@
-+Virtual MTD concat device
-+
-+Requires properties:
-+- devices: list of phandles to mtd nodes that should be concatenated
-+
-+Example:
-+
-+&spi {
-+	flash0: flash@0 {
-+		...
-+	};
-+	flash1: flash@1 {
-+		...
-+	};
-+};
-+
-+flash {
-+	compatible = "mtd-concat";
-+
-+	devices = <&flash0 &flash1>;
-+
-+	partitions {
-+		compatible = "fixed-partitions";
-+
-+		partition@0 {
-+			label = "boot";
-+			reg = <0x0000000 0x0040000>;
-+			read-only;
-+		};
-+
-+		partition@40000 {
-+			label = "firmware";
-+			reg = <0x0040000 0x1fc0000>;
-+		};
-+	}
-+}
diff --git a/target/linux/generic/pending-6.1/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch b/target/linux/generic/pending-6.1/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
deleted file mode 100644
index e0cbc4508b06..000000000000
--- a/target/linux/generic/pending-6.1/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
+++ /dev/null
@@ -1,216 +0,0 @@
-From e53f712d8eac71f54399b61038ccf87d2cee99d7 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Sat, 25 Aug 2018 12:35:22 +0200
-Subject: [PATCH 497/497] mtd: mtdconcat: add dt driver for concat devices
-
-Some mtd drivers like physmap variants have support for concatenating
-multiple mtd devices, but there is no generic way to define such a
-concat device from within the device tree.
-
-This is useful for some SoC boards that use multiple flash chips as
-memory banks of a single mtd device, with partitions spanning chip
-borders.
-
-This commit adds a driver for creating virtual mtd-concat devices. They
-must have a compatible = "mtd-concat" line, and define a list of devices
-to concat in the 'devices' property, for example:
-
-flash {
-  compatible = "mtd-concat";
-
-  devices = <&flash0 &flash1>;
-
-  partitions {
-    ...
-  };
-};
-
-The driver is added to the very end of the mtd Makefile to increase the
-likelyhood of all child devices already being loaded at the time of
-probing, preventing unnecessary deferred probes.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- drivers/mtd/Kconfig                 |   2 +
- drivers/mtd/Makefile                |   3 +
- drivers/mtd/composite/Kconfig       |  12 +++
- drivers/mtd/composite/Makefile      |   6 ++
- drivers/mtd/composite/virt_concat.c | 128 ++++++++++++++++++++++++++++
- 5 files changed, 151 insertions(+)
- create mode 100644 drivers/mtd/composite/Kconfig
- create mode 100644 drivers/mtd/composite/Makefile
- create mode 100644 drivers/mtd/composite/virt_concat.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -241,4 +241,6 @@ source "drivers/mtd/ubi/Kconfig"
- 
- source "drivers/mtd/hyperbus/Kconfig"
- 
-+source "drivers/mtd/composite/Kconfig"
-+
- endif # MTD
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -33,3 +33,6 @@ obj-y		+= chips/ lpddr/ maps/ devices/ n
- obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor/
- obj-$(CONFIG_MTD_UBI)		+= ubi/
- obj-$(CONFIG_MTD_HYPERBUS)	+= hyperbus/
-+
-+# Composite drivers must be loaded last
-+obj-y				+= composite/
---- /dev/null
-+++ b/drivers/mtd/composite/Kconfig
-@@ -0,0 +1,12 @@
-+menu "Composite MTD device drivers"
-+	depends on MTD!=n
-+
-+config MTD_VIRT_CONCAT
-+	tristate "Virtual concat MTD device"
-+	help
-+	  This driver allows creation of a virtual MTD concat device, which
-+	  concatenates multiple underlying MTD devices to a single device.
-+	  This is required by some SoC boards where multiple memory banks are
-+	  used as one device with partitions spanning across device boundaries.
-+
-+endmenu
---- /dev/null
-+++ b/drivers/mtd/composite/Makefile
-@@ -0,0 +1,6 @@
-+# SPDX-License-Identifier: GPL-2.0
-+#
-+# linux/drivers/mtd/composite/Makefile
-+#
-+
-+obj-$(CONFIG_MTD_VIRT_CONCAT)   += virt_concat.o
---- /dev/null
-+++ b/drivers/mtd/composite/virt_concat.c
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Virtual concat MTD device driver
-+ *
-+ * Copyright (C) 2018 Bernhard Frauendienst
-+ * Author: Bernhard Frauendienst, kernel@nospam.obeliks.de
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/mtd/concat.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/slab.h>
-+
-+/*
-+ * struct of_virt_concat - platform device driver data.
-+ * @cmtd the final mtd_concat device
-+ * @num_devices the number of devices in @devices
-+ * @devices points to an array of devices already loaded
-+ */
-+struct of_virt_concat {
-+	struct mtd_info	*cmtd;
-+	int num_devices;
-+	struct mtd_info	**devices;
-+};
-+
-+static int virt_concat_remove(struct platform_device *pdev)
-+{
-+	struct of_virt_concat *info;
-+	int i;
-+
-+	info = platform_get_drvdata(pdev);
-+	if (!info)
-+		return 0;
-+
-+	// unset data for when this is called after a probe error
-+	platform_set_drvdata(pdev, NULL);
-+
-+	if (info->cmtd) {
-+		mtd_device_unregister(info->cmtd);
-+		mtd_concat_destroy(info->cmtd);
-+	}
-+
-+	if (info->devices) {
-+		for (i = 0; i < info->num_devices; i++)
-+			put_mtd_device(info->devices[i]);
-+	}
-+
-+	return 0;
-+}
-+
-+static int virt_concat_probe(struct platform_device *pdev)
-+{
-+	struct device_node *node = pdev->dev.of_node;
-+	struct of_phandle_iterator it;
-+	struct of_virt_concat *info;
-+	struct mtd_info *mtd;
-+	int err = 0, count;
-+
-+	count = of_count_phandle_with_args(node, "devices", NULL);
-+	if (count <= 0)
-+		return -EINVAL;
-+
-+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-+	if (!info)
-+		return -ENOMEM;
-+	info->devices = devm_kcalloc(&pdev->dev, count,
-+				     sizeof(*(info->devices)), GFP_KERNEL);
-+	if (!info->devices) {
-+		err = -ENOMEM;
-+		goto err_remove;
-+	}
-+
-+	platform_set_drvdata(pdev, info);
-+
-+	of_for_each_phandle(&it, err, node, "devices", NULL, 0) {
-+		mtd = of_get_mtd_device_by_node(it.node);
-+		if (IS_ERR(mtd)) {
-+			of_node_put(it.node);
-+			err = -EPROBE_DEFER;
-+			goto err_remove;
-+		}
-+
-+		info->devices[info->num_devices++] = mtd;
-+	}
-+
-+	info->cmtd = mtd_concat_create(info->devices, info->num_devices,
-+				       dev_name(&pdev->dev));
-+	if (!info->cmtd) {
-+		err = -ENXIO;
-+		goto err_remove;
-+	}
-+
-+	info->cmtd->dev.parent = &pdev->dev;
-+	mtd_set_of_node(info->cmtd, node);
-+	mtd_device_register(info->cmtd, NULL, 0);
-+
-+	return 0;
-+
-+err_remove:
-+	virt_concat_remove(pdev);
-+
-+	return err;
-+}
-+
-+static const struct of_device_id virt_concat_of_match[] = {
-+	{ .compatible = "mtd-concat", },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, virt_concat_of_match);
-+
-+static struct platform_driver virt_concat_driver = {
-+	.probe = virt_concat_probe,
-+	.remove = virt_concat_remove,
-+	.driver	 = {
-+		.name   = "virt-mtdconcat",
-+		.of_match_table = virt_concat_of_match,
-+	},
-+};
-+
-+module_platform_driver(virt_concat_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Bernhard Frauendienst <kernel@nospam.obeliks.de>");
-+MODULE_DESCRIPTION("Virtual concat MTD device driver");
diff --git a/target/linux/generic/pending-6.1/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch b/target/linux/generic/pending-6.1/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch
deleted file mode 100644
index 1a4d5a766f22..000000000000
--- a/target/linux/generic/pending-6.1/498-mtd-spi-nor-locking-support-for-MX25L6405D.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 8bf2ce6ea4ee840b70f55a27f80e1cd308051b13 Mon Sep 17 00:00:00 2001
-From: Nick Hainke <vincent@systemli.org>
-Date: Mon, 27 Dec 2021 00:38:13 +0100
-Subject: [PATCH 1/2] mtd: spi-nor: locking support for MX25L6405D
-
-Macronix MX25L6405D supports locking with four block-protection bits.
-Currently, the driver only sets three bits.  If the bootloader does not
-sustain the flash chip in an unlocked state, the flash might be
-non-writeable. Add the corresponding flag to enable locking support with
-four bits in the status register.
-
-Tested on Nanostation M2 XM.
-
-Similar to commit 7ea40b54e83b ("mtd: spi-nor: enable locking support for
-MX25L12805D")
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: Nick Hainke <vincent@systemli.org>
----
- drivers/mtd/spi-nor/macronix.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/macronix.c
-+++ b/drivers/mtd/spi-nor/macronix.c
-@@ -48,6 +48,7 @@ static const struct flash_info macronix_
- 	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64)
- 		NO_SFDP_FLAGS(SECT_4K) },
- 	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128)
-+		FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP)
- 		NO_SFDP_FLAGS(SECT_4K) },
- 	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4)
- 		NO_SFDP_FLAGS(SECT_4K) },
diff --git a/target/linux/generic/pending-6.1/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch b/target/linux/generic/pending-6.1/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch
deleted file mode 100644
index 99e0fc72bf71..000000000000
--- a/target/linux/generic/pending-6.1/499-mtd-spi-nor-disable-16-bit-sr-for-macronix.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 245224608b5368c10407da07557e546743d3c489 Mon Sep 17 00:00:00 2001
-From: Nick Hainke <vincent@systemli.org>
-Date: Mon, 27 Dec 2021 09:33:13 +0100
-Subject: [PATCH 2/2] mtd: spi-nor: disable 16-bit-sr for macronix
-
-Macronix flash chips seem to consist of only one status register.
-These chips will not work with the "16-bit Write Status (01h) Command".
-Disable SNOR_F_HAS_16BIT_SR for all Macronix chips.
-
-Tested with MX25L6405D.
-
-Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on
-lock()/unlock()")
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Signed-off-by: Nick Hainke <vincent@systemli.org>
----
- drivers/mtd/spi-nor/macronix.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/macronix.c
-+++ b/drivers/mtd/spi-nor/macronix.c
-@@ -107,6 +107,7 @@ static void macronix_nor_default_init(st
- {
- 	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
- 	nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
-+	nor->flags &= ~SNOR_F_HAS_16BIT_SR;
- 	nor->flags |= SNOR_F_HAS_LOCK;
- }
- 
diff --git a/target/linux/generic/pending-6.1/500-fs_cdrom_dependencies.patch b/target/linux/generic/pending-6.1/500-fs_cdrom_dependencies.patch
deleted file mode 100644
index 2053c0fbe2e0..000000000000
--- a/target/linux/generic/pending-6.1/500-fs_cdrom_dependencies.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From af7b91bcecce0eae24e90acd35d96ecee73e1407 Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 12:21:15 +0200
-Subject: [PATCH] fs: add cdrom dependency
-
----
- fs/hfs/Kconfig     | 1 +
- fs/hfsplus/Kconfig | 1 +
- fs/isofs/Kconfig   | 1 +
- fs/udf/Kconfig     | 1 +
- 4 files changed, 4 insertions(+)
-
---- a/fs/hfs/Kconfig
-+++ b/fs/hfs/Kconfig
-@@ -2,6 +2,7 @@
- config HFS_FS
- 	tristate "Apple Macintosh file system support"
- 	depends on BLOCK
-+	select CDROM
- 	select NLS
- 	help
- 	  If you say Y here, you will be able to mount Macintosh-formatted
---- a/fs/hfsplus/Kconfig
-+++ b/fs/hfsplus/Kconfig
-@@ -2,6 +2,7 @@
- config HFSPLUS_FS
- 	tristate "Apple Extended HFS file system support"
- 	depends on BLOCK
-+	select CDROM
- 	select NLS
- 	select NLS_UTF8
- 	help
---- a/fs/isofs/Kconfig
-+++ b/fs/isofs/Kconfig
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0-only
- config ISO9660_FS
- 	tristate "ISO 9660 CDROM file system support"
-+	select CDROM
- 	help
- 	  This is the standard file system used on CD-ROMs.  It was previously
- 	  known as "High Sierra File System" and is called "hsfs" on other
---- a/fs/udf/Kconfig
-+++ b/fs/udf/Kconfig
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0-only
- config UDF_FS
- 	tristate "UDF file system support"
-+	select CDROM
- 	select CRC_ITU_T
- 	select NLS
- 	help
diff --git a/target/linux/generic/pending-6.1/510-block-add-uImage.FIT-subimage-block-driver.patch b/target/linux/generic/pending-6.1/510-block-add-uImage.FIT-subimage-block-driver.patch
deleted file mode 100644
index befc505dbc6b..000000000000
--- a/target/linux/generic/pending-6.1/510-block-add-uImage.FIT-subimage-block-driver.patch
+++ /dev/null
@@ -1,733 +0,0 @@
-From 6173a065cb395d4a9528c4e49810af127db68141 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 16 Nov 2022 12:49:52 +0000
-Subject: [PATCH 1/2] block: add uImage.FIT subimage block driver
-
-Add a small block driver which exposes filesystem sub-images contained
-in U-Boot uImage.FIT images as block devices.
-
-The uImage.FIT image has to be stored directly on a block device or
-partition, MTD device or partition, or UBI volume.
-
-The driver is intended for systems using the U-Boot bootloader and
-uses the root device hint left by the bootloader (or the user) in
-the 'chosen' section of the device-tree.
-
-Example:
-/dts-v1/;
-/ {
-        chosen {
-                rootdisk = <&mmc0_part3>;
-        };
-};
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- MAINTAINERS                 |   6 +
- drivers/block/Kconfig       |  12 +
- drivers/block/Makefile      |   2 +
- drivers/block/fitblk.c      | 658 ++++++++++++++++++++++++++++++++++++
- drivers/block/open          |   4 +
- include/uapi/linux/fitblk.h |  10 +
- 6 files changed, 692 insertions(+)
- create mode 100644 drivers/block/fitblk.c
- create mode 100644 drivers/block/open
- create mode 100644 include/uapi/linux/fitblk.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -21060,6 +21060,12 @@ F:	Documentation/filesystems/ubifs-authe
- F:	Documentation/filesystems/ubifs.rst
- F:	fs/ubifs/
- 
-+U-BOOT UIMAGE.FIT PARSER
-+M:	Daniel Golle <daniel@makrotopia.org>
-+L:	linux-block@vger.kernel.org
-+S:	Maintained
-+F:	drivers/block/fitblk.c
-+
- UBLK USERSPACE BLOCK DRIVER
- M:	Ming Lei <ming.lei@redhat.com>
- L:	linux-block@vger.kernel.org
---- a/drivers/block/Kconfig
-+++ b/drivers/block/Kconfig
-@@ -383,6 +383,18 @@ config VIRTIO_BLK
- 	  This is the virtual block driver for virtio.  It can be used with
-           QEMU based VMMs (like KVM or Xen).  Say Y or M.
- 
-+config UIMAGE_FIT_BLK
-+	bool "uImage.FIT block driver"
-+	help
-+	  This driver allows using filesystems contained in uImage.FIT images
-+	  by mapping them as block devices.
-+
-+	  It can currently not be built as a module due to libfdt symbols not
-+	  being exported.
-+
-+	  Say Y if you want to mount filesystems sub-images of a uImage.FIT
-+	  stored in a block device partition, mtdblock or ubiblock device.
-+
- config BLK_DEV_RBD
- 	tristate "Rados block device (RBD)"
- 	depends on INET && BLOCK
---- a/drivers/block/Makefile
-+++ b/drivers/block/Makefile
-@@ -39,4 +39,6 @@ obj-$(CONFIG_BLK_DEV_NULL_BLK)	+= null_b
- 
- obj-$(CONFIG_BLK_DEV_UBLK)			+= ublk_drv.o
- 
-+obj-$(CONFIG_UIMAGE_FIT_BLK)	+= fitblk.o
-+
- swim_mod-y	:= swim.o swim_asm.o
---- /dev/null
-+++ b/drivers/block/fitblk.c
-@@ -0,0 +1,636 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * uImage.FIT virtual block device driver.
-+ *
-+ * Copyright (C) 2023 Daniel Golle
-+ * Copyright (C) 2007 Nick Piggin
-+ * Copyright (C) 2007 Novell Inc.
-+ *
-+ * Initially derived from drivers/block/brd.c which is in parts derived from
-+ * drivers/block/rd.c, and drivers/block/loop.c, copyright of their respective
-+ * owners.
-+ *
-+ * uImage.FIT headers extracted from Das U-Boot
-+ *  (C) Copyright 2008 Semihalf
-+ *  (C) Copyright 2000-2005
-+ *  Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/initrd.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/major.h>
-+#include <linux/blkdev.h>
-+#include <linux/blkpg.h>
-+#include <linux/blk-mq.h>
-+#include <linux/ctype.h>
-+#include <linux/hdreg.h>
-+#include <linux/list.h>
-+#include <linux/mutex.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/of_fdt.h>
-+#include <linux/pagemap.h>
-+#include <linux/platform_device.h>
-+#include <linux/property.h>
-+#include <linux/refcount.h>
-+#include <linux/task_work.h>
-+#include <linux/types.h>
-+#include <linux/libfdt.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/root_dev.h>
-+#include <uapi/linux/fitblk.h>
-+
-+#define FIT_DEVICE_PREFIX	"fit"
-+
-+/* maximum number of pages used for the uImage.FIT index structure */
-+#define FIT_MAX_PAGES		1024
-+
-+/* minimum free sectors to map as read-write "remainder" volume */
-+#define MIN_FREE_SECT		16
-+
-+/* maximum number of mapped loadables */
-+#define MAX_FIT_LOADABLES	16
-+
-+/* constants for uImage.FIT structrure traversal */
-+#define FIT_IMAGES_PATH		"/images"
-+#define FIT_CONFS_PATH		"/configurations"
-+
-+/* hash/signature/key node */
-+#define FIT_HASH_NODENAME	"hash"
-+#define FIT_ALGO_PROP		"algo"
-+#define FIT_VALUE_PROP		"value"
-+#define FIT_IGNORE_PROP		"uboot-ignore"
-+#define FIT_SIG_NODENAME	"signature"
-+#define FIT_KEY_REQUIRED	"required"
-+#define FIT_KEY_HINT		"key-name-hint"
-+
-+/* cipher node */
-+#define FIT_CIPHER_NODENAME	"cipher"
-+#define FIT_ALGO_PROP		"algo"
-+
-+/* image node */
-+#define FIT_DATA_PROP		"data"
-+#define FIT_DATA_POSITION_PROP	"data-position"
-+#define FIT_DATA_OFFSET_PROP	"data-offset"
-+#define FIT_DATA_SIZE_PROP	"data-size"
-+#define FIT_TIMESTAMP_PROP	"timestamp"
-+#define FIT_DESC_PROP		"description"
-+#define FIT_ARCH_PROP		"arch"
-+#define FIT_TYPE_PROP		"type"
-+#define FIT_OS_PROP		"os"
-+#define FIT_COMP_PROP		"compression"
-+#define FIT_ENTRY_PROP		"entry"
-+#define FIT_LOAD_PROP		"load"
-+
-+/* configuration node */
-+#define FIT_KERNEL_PROP		"kernel"
-+#define FIT_FILESYSTEM_PROP	"filesystem"
-+#define FIT_RAMDISK_PROP	"ramdisk"
-+#define FIT_FDT_PROP		"fdt"
-+#define FIT_LOADABLE_PROP	"loadables"
-+#define FIT_DEFAULT_PROP	"default"
-+#define FIT_SETUP_PROP		"setup"
-+#define FIT_FPGA_PROP		"fpga"
-+#define FIT_FIRMWARE_PROP	"firmware"
-+#define FIT_STANDALONE_PROP	"standalone"
-+
-+/* fitblk driver data */
-+static const char *_fitblk_claim_ptr = "I belong to fitblk";
-+static const char *ubootver;
-+struct device_node *rootdisk;
-+static struct platform_device *pdev;
-+static LIST_HEAD(fitblk_devices);
-+static DEFINE_MUTEX(devices_mutex);
-+refcount_t num_devs;
-+
-+struct fitblk {
-+	struct platform_device	*pdev;
-+	struct block_device	*lower_bdev;
-+	sector_t		start_sect;
-+	struct gendisk		*disk;
-+	struct work_struct	remove_work;
-+	struct list_head	list;
-+	bool			dead;
-+};
-+
-+static int fitblk_open(struct block_device *bdev, fmode_t mode)
-+{
-+	struct fitblk *fitblk = bdev->bd_disk->private_data;
-+
-+	if (fitblk->dead)
-+		return -ENOENT;
-+
-+	return 0;
-+}
-+
-+static void fitblk_release(struct gendisk *disk, fmode_t mode)
-+{
-+	return;
-+}
-+
-+static void fitblk_submit_bio(struct bio *orig_bio)
-+{
-+	struct bio *bio = orig_bio;
-+	struct fitblk *fitblk = bio->bi_bdev->bd_disk->private_data;
-+
-+	if (fitblk->dead)
-+		return;
-+
-+	/* mangle bio and re-submit */
-+	while (bio) {
-+		bio->bi_iter.bi_sector += fitblk->start_sect;
-+		bio->bi_bdev = fitblk->lower_bdev;
-+		bio = bio->bi_next;
-+	}
-+	submit_bio(orig_bio);
-+}
-+
-+static void fitblk_remove(struct fitblk *fitblk)
-+{
-+	blk_mark_disk_dead(fitblk->disk);
-+	mutex_lock(&devices_mutex);
-+	fitblk->dead = true;
-+	list_del(&fitblk->list);
-+	mutex_unlock(&devices_mutex);
-+
-+	schedule_work(&fitblk->remove_work);
-+}
-+
-+static int fitblk_ioctl(struct block_device *bdev, fmode_t mode,
-+			unsigned int cmd, unsigned long arg)
-+{
-+	struct fitblk *fitblk = bdev->bd_disk->private_data;
-+
-+	if (!capable(CAP_SYS_ADMIN))
-+		return -EACCES;
-+
-+	if (fitblk->dead)
-+		return -ENOENT;
-+
-+	switch (cmd) {
-+	case FITBLK_RELEASE:
-+		fitblk_remove(fitblk);
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct block_device_operations fitblk_fops = {
-+	.owner		= THIS_MODULE,
-+	.ioctl		= fitblk_ioctl,
-+	.open		= fitblk_open,
-+	.release	= fitblk_release,
-+	.submit_bio	= fitblk_submit_bio,
-+};
-+
-+static void fitblk_purge(struct work_struct *work)
-+{
-+	struct fitblk *fitblk = container_of(work, struct fitblk, remove_work);
-+
-+	//del_gendisk(fitblk->disk); // causes crash, not doing it doesn't matter
-+	refcount_dec(&num_devs);
-+	platform_device_del(fitblk->pdev);
-+	platform_device_put(fitblk->pdev);
-+
-+	if (refcount_dec_if_one(&num_devs)) {
-+		sysfs_remove_link(&pdev->dev.kobj, "lower_dev");
-+		blkdev_put(fitblk->lower_bdev, FMODE_READ | FMODE_EXCL);
-+	}
-+
-+	kfree(fitblk);
-+}
-+
-+static int add_fit_subimage_device(struct block_device *lower_bdev,
-+				   unsigned int slot, sector_t start_sect,
-+				   sector_t nr_sect, bool readonly)
-+{
-+	struct fitblk *fitblk;
-+	struct gendisk *disk;
-+	int err;
-+
-+	mutex_lock(&devices_mutex);
-+	if (!refcount_inc_not_zero(&num_devs))
-+		return -EBADF;
-+
-+	fitblk = kzalloc(sizeof(struct fitblk), GFP_KERNEL);
-+	if (!fitblk) {
-+		err = -ENOMEM;
-+		goto out_unlock;
-+	}
-+
-+	fitblk->lower_bdev = lower_bdev;
-+	fitblk->start_sect = start_sect;
-+	INIT_WORK(&fitblk->remove_work, fitblk_purge);
-+
-+	disk = blk_alloc_disk(NUMA_NO_NODE);
-+	if (!disk) {
-+		err = -ENOMEM;
-+		goto out_free_fitblk;
-+	}
-+
-+	disk->first_minor = 0;
-+	disk->flags = lower_bdev->bd_disk->flags | GENHD_FL_NO_PART;
-+	disk->fops = &fitblk_fops;
-+	disk->private_data = fitblk;
-+	if (readonly) {
-+		set_disk_ro(disk, 1);
-+		snprintf(disk->disk_name, sizeof(disk->disk_name), FIT_DEVICE_PREFIX "%u", slot);
-+	} else {
-+		strcpy(disk->disk_name, FIT_DEVICE_PREFIX "rw");
-+	}
-+
-+	set_capacity(disk, nr_sect);
-+
-+	disk->queue->queue_flags = lower_bdev->bd_disk->queue->queue_flags;
-+	memcpy(&disk->queue->limits, &lower_bdev->bd_disk->queue->limits,
-+	       sizeof(struct queue_limits));
-+
-+	fitblk->disk = disk;
-+	fitblk->pdev = platform_device_alloc(disk->disk_name, PLATFORM_DEVID_NONE);
-+	if (!fitblk->pdev) {
-+		err = -ENOMEM;
-+		goto out_cleanup_disk;
-+	}
-+
-+	fitblk->pdev->dev.parent = &pdev->dev;
-+	err = platform_device_add(fitblk->pdev);
-+	if (err)
-+		goto out_put_pdev;
-+
-+	err = device_add_disk(&fitblk->pdev->dev, disk, NULL);
-+	if (err)
-+		goto out_del_pdev;
-+
-+	if (!ROOT_DEV)
-+		ROOT_DEV = disk->part0->bd_dev;
-+
-+	list_add_tail(&fitblk->list, &fitblk_devices);
-+
-+	mutex_unlock(&devices_mutex);
-+
-+	return 0;
-+
-+out_del_pdev:
-+	platform_device_del(fitblk->pdev);
-+out_put_pdev:
-+	platform_device_put(fitblk->pdev);
-+out_cleanup_disk:
-+	put_disk(disk);
-+out_free_fitblk:
-+	kfree(fitblk);
-+out_unlock:
-+	refcount_dec(&num_devs);
-+	mutex_unlock(&devices_mutex);
-+	return err;
-+}
-+
-+static int parse_fit_on_dev(struct device *dev)
-+{
-+	struct block_device *bdev;
-+	struct address_space *mapping;
-+	struct folio *folio;
-+	pgoff_t f_index = 0;
-+	size_t bytes_left, bytes_to_copy;
-+	void *pre_fit, *fit, *fit_c;
-+	u64 dsize, dsectors, imgmaxsect = 0;
-+	u32 size, image_pos, image_len;
-+	const __be32 *image_offset_be, *image_len_be, *image_pos_be;
-+	int ret = 0, node, images, config;
-+	const char *image_name, *image_type, *image_description,
-+		*config_default, *config_description, *config_loadables;
-+	u32 image_name_len, image_type_len, image_description_len,
-+		bootconf_len, config_default_len, config_description_len,
-+		config_loadables_len;
-+	sector_t start_sect, nr_sects;
-+	struct device_node *np = NULL;
-+	const char *bootconf_c;
-+	const char *loadable;
-+	char *bootconf = NULL, *bootconf_term;
-+	bool found;
-+	int loadables_rem_len, loadable_len;
-+	u16 loadcnt;
-+	unsigned int slot = 0;
-+
-+	/* Exclusive open the block device to receive holder notifications */
-+	bdev = blkdev_get_by_dev(dev->devt, FMODE_READ | FMODE_EXCL, &_fitblk_claim_ptr);
-+	if (!bdev)
-+		return -ENODEV;
-+
-+	if (IS_ERR(bdev))
-+		return PTR_ERR(bdev);
-+
-+	mapping = bdev->bd_inode->i_mapping;
-+
-+	/* map first page */
-+	folio = read_mapping_folio(mapping, f_index++, NULL);
-+	if (IS_ERR(folio)) {
-+		ret = PTR_ERR(folio);
-+		goto out_blkdev;
-+	}
-+	pre_fit = folio_address(folio) + offset_in_folio(folio, 0);
-+
-+	/* uImage.FIT is based on flattened device tree structure */
-+	if (fdt_check_header(pre_fit)) {
-+		ret = -EINVAL;
-+		folio_put(folio);
-+		goto out_blkdev;
-+	}
-+
-+	size = fdt_totalsize(pre_fit);
-+
-+	if (size > PAGE_SIZE * FIT_MAX_PAGES) {
-+		ret = -EOPNOTSUPP;
-+		folio_put(folio);
-+		goto out_blkdev;
-+	}
-+
-+	/* acquire disk size */
-+	dsectors = bdev_nr_sectors(bdev);
-+	dsize = dsectors << SECTOR_SHIFT;
-+
-+	/* abort if FIT structure is larger than disk or partition size */
-+	if (size >= dsize) {
-+		ret = -EFBIG;
-+		folio_put(folio);
-+		goto out_blkdev;
-+	}
-+
-+	fit = kmalloc(size, GFP_KERNEL);
-+	if (!fit) {
-+		ret = -ENOMEM;
-+		folio_put(folio);
-+		goto out_blkdev;
-+	}
-+
-+	bytes_left = size;
-+	fit_c = fit;
-+	while (bytes_left > 0) {
-+		bytes_to_copy = min_t(size_t, bytes_left,
-+				     folio_size(folio) - offset_in_folio(folio, 0));
-+		memcpy(fit_c, pre_fit, bytes_to_copy);
-+		fit_c += bytes_to_copy;
-+		bytes_left -= bytes_to_copy;
-+		if (bytes_left) {
-+			folio_put(folio);
-+			folio = read_mapping_folio(mapping, f_index++, NULL);
-+			if (IS_ERR(folio)) {
-+				ret = PTR_ERR(folio);
-+				goto out_blkdev;
-+			};
-+			pre_fit = folio_address(folio) + offset_in_folio(folio, 0);
-+		}
-+	}
-+	folio_put(folio);
-+
-+	/* set boot config node name U-Boot may have added to the device tree */
-+	np = of_find_node_by_path("/chosen");
-+	if (np) {
-+		bootconf_c = of_get_property(np, "u-boot,bootconf", &bootconf_len);
-+		if (bootconf_c && bootconf_len)
-+			bootconf = kmemdup_nul(bootconf_c, bootconf_len, GFP_KERNEL);
-+	}
-+
-+	if (bootconf) {
-+		bootconf_term = strchr(bootconf, '#');
-+		if (bootconf_term)
-+			*bootconf_term = '\0';
-+	}
-+
-+	/* find configuration path in uImage.FIT */
-+	config = fdt_path_offset(fit, FIT_CONFS_PATH);
-+	if (config < 0) {
-+		pr_err("FIT: Cannot find %s node: %d\n",
-+			FIT_CONFS_PATH, config);
-+		ret = -ENOENT;
-+		goto out_bootconf;
-+	}
-+
-+	/* get default configuration node name */
-+	config_default =
-+		fdt_getprop(fit, config, FIT_DEFAULT_PROP, &config_default_len);
-+
-+	/* make sure we got either default or selected boot config node name */
-+	if (!config_default && !bootconf) {
-+		pr_err("FIT: Cannot find default configuration\n");
-+		ret = -ENOENT;
-+		goto out_bootconf;
-+	}
-+
-+	/* find selected boot config node, fallback on default config node */
-+	node = fdt_subnode_offset(fit, config, bootconf ?: config_default);
-+	if (node < 0) {
-+		pr_err("FIT: Cannot find %s node: %d\n",
-+			bootconf ?: config_default, node);
-+		ret = -ENOENT;
-+		goto out_bootconf;
-+	}
-+
-+	pr_info("FIT: Detected U-Boot %s\n", ubootver);
-+
-+	/* get selected configuration data */
-+	config_description =
-+		fdt_getprop(fit, node, FIT_DESC_PROP, &config_description_len);
-+	config_loadables = fdt_getprop(fit, node, FIT_LOADABLE_PROP,
-+				       &config_loadables_len);
-+
-+	pr_info("FIT: %s configuration: \"%.*s\"%s%.*s%s\n",
-+		bootconf ? "Selected" : "Default",
-+		bootconf ? bootconf_len : config_default_len,
-+		bootconf ?: config_default,
-+		config_description ? " (" : "",
-+		config_description ? config_description_len : 0,
-+		config_description ?: "",
-+		config_description ? ")" : "");
-+
-+	if (!config_loadables || !config_loadables_len) {
-+		pr_err("FIT: No loadables configured in \"%s\"\n",
-+			bootconf ?: config_default);
-+		ret = -ENOENT;
-+		goto out_bootconf;
-+	}
-+
-+	/* get images path in uImage.FIT */
-+	images = fdt_path_offset(fit, FIT_IMAGES_PATH);
-+	if (images < 0) {
-+		pr_err("FIT: Cannot find %s node: %d\n", FIT_IMAGES_PATH, images);
-+		ret = -EINVAL;
-+		goto out_bootconf;
-+	}
-+
-+	/* iterate over images in uImage.FIT */
-+	fdt_for_each_subnode(node, fit, images) {
-+		image_name = fdt_get_name(fit, node, &image_name_len);
-+		image_type = fdt_getprop(fit, node, FIT_TYPE_PROP, &image_type_len);
-+		image_offset_be = fdt_getprop(fit, node, FIT_DATA_OFFSET_PROP, NULL);
-+		image_pos_be = fdt_getprop(fit, node, FIT_DATA_POSITION_PROP, NULL);
-+		image_len_be = fdt_getprop(fit, node, FIT_DATA_SIZE_PROP, NULL);
-+
-+		if (!image_name || !image_type || !image_len_be ||
-+		    !image_name_len || !image_type_len)
-+			continue;
-+
-+		image_len = be32_to_cpu(*image_len_be);
-+		if (!image_len)
-+			continue;
-+
-+		if (image_offset_be)
-+			image_pos = be32_to_cpu(*image_offset_be) + size;
-+		else if (image_pos_be)
-+			image_pos = be32_to_cpu(*image_pos_be);
-+		else
-+			continue;
-+
-+		image_description = fdt_getprop(fit, node, FIT_DESC_PROP,
-+						&image_description_len);
-+
-+		pr_info("FIT: %16s sub-image 0x%08x..0x%08x \"%.*s\"%s%.*s%s\n",
-+			image_type, image_pos, image_pos + image_len - 1,
-+			image_name_len, image_name, image_description ? " (" : "",
-+			image_description ? image_description_len : 0,
-+			image_description ?: "", image_description ? ") " : "");
-+
-+		/* only 'filesystem' images should be mapped as partitions */
-+		if (strncmp(image_type, FIT_FILESYSTEM_PROP, image_type_len))
-+			continue;
-+
-+		/* check if sub-image is part of configured loadables */
-+		found = false;
-+		loadable = config_loadables;
-+		loadables_rem_len = config_loadables_len;
-+		for (loadcnt = 0; loadables_rem_len > 1 &&
-+				  loadcnt < MAX_FIT_LOADABLES; ++loadcnt) {
-+			loadable_len =
-+				strnlen(loadable, loadables_rem_len - 1) + 1;
-+			loadables_rem_len -= loadable_len;
-+			if (!strncmp(image_name, loadable, loadable_len)) {
-+				found = true;
-+				break;
-+			}
-+			loadable += loadable_len;
-+		}
-+		if (!found)
-+			continue;
-+
-+		if (image_pos % (1 << PAGE_SHIFT)) {
-+			dev_err(dev, "FIT: image %.*s start not aligned to page boundaries, skipping\n",
-+				image_name_len, image_name);
-+			continue;
-+		}
-+
-+		if (image_len % (1 << PAGE_SHIFT)) {
-+			dev_err(dev, "FIT: sub-image %.*s end not aligned to page boundaries, skipping\n",
-+				image_name_len, image_name);
-+			continue;
-+		}
-+
-+		start_sect = image_pos >> SECTOR_SHIFT;
-+		nr_sects = image_len >> SECTOR_SHIFT;
-+		imgmaxsect = max_t(sector_t, imgmaxsect, start_sect + nr_sects);
-+
-+		if (start_sect + nr_sects > dsectors) {
-+			dev_err(dev, "FIT: sub-image %.*s disk access beyond EOD\n",
-+				image_name_len, image_name);
-+			continue;
-+		}
-+
-+		if (!slot) {
-+			ret = sysfs_create_link_nowarn(&pdev->dev.kobj, bdev_kobj(bdev), "lower_dev");
-+			if (ret && ret != -EEXIST)
-+				goto out_bootconf;
-+
-+			ret = 0;
-+		}
-+
-+		add_fit_subimage_device(bdev, slot++, start_sect, nr_sects, true);
-+	}
-+
-+	if (!found || !slot)
-+		goto out_bootconf;
-+
-+	dev_info(dev, "mapped %u uImage.FIT filesystem sub-image%s as /dev/fit%s%u%s\n",
-+		 slot, (slot > 1)?"s":"", (slot > 1)?"[0...":"", slot - 1,
-+		 (slot > 1)?"]":"");
-+
-+	/* in case uImage.FIT is stored in a partition, map the remaining space */
-+	if (!bdev->bd_read_only && bdev_is_partition(bdev) &&
-+	    (imgmaxsect + MIN_FREE_SECT) < dsectors) {
-+		add_fit_subimage_device(bdev, slot++, imgmaxsect,
-+					dsectors - imgmaxsect, false);
-+		dev_info(dev, "mapped remaining space as /dev/fitrw\n");
-+	}
-+
-+out_bootconf:
-+	kfree(bootconf);
-+	kfree(fit);
-+out_blkdev:
-+	if (!found || ret)
-+		blkdev_put(bdev, FMODE_READ | FMODE_EXCL);
-+
-+	return ret;
-+}
-+
-+static int fitblk_match_of_node(struct device *dev, const void *np)
-+{
-+	int ret;
-+
-+	ret = device_match_of_node(dev, np);
-+	if (ret)
-+		return ret;
-+
-+	/*
-+	 * To match ubiblock and mtdblock devices by their parent ubi
-+	 * or mtd device, also consider block device parent
-+	 */
-+	if (!dev->parent)
-+		return 0;
-+
-+	return device_match_of_node(dev->parent, np);
-+}
-+
-+static int fitblk_probe(struct platform_device *pdev)
-+{
-+	struct device *dev;
-+
-+	dev = class_find_device(&block_class, NULL, rootdisk, fitblk_match_of_node);
-+	if (!dev)
-+		return -EPROBE_DEFER;
-+
-+	return parse_fit_on_dev(dev);
-+}
-+
-+static struct platform_driver fitblk_driver = {
-+	.probe		= fitblk_probe,
-+	.driver		= {
-+		.name   = "fitblk",
-+		.owner   = THIS_MODULE,
-+	},
-+};
-+
-+static int __init fitblk_init(void)
-+{
-+	/* detect U-Boot firmware */
-+	ubootver = of_get_property(of_chosen, "u-boot,version", NULL);
-+	if (!ubootver)
-+		return 0;
-+
-+	/* parse 'rootdisk' property phandle */
-+	rootdisk = of_parse_phandle(of_chosen, "rootdisk", 0);
-+	if (!rootdisk)
-+		return 0;
-+
-+	if (platform_driver_register(&fitblk_driver))
-+		return -ENODEV;
-+
-+	refcount_set(&num_devs, 1);
-+	pdev = platform_device_register_simple("fitblk", -1, NULL, 0);
-+	if (IS_ERR(pdev))
-+		return PTR_ERR(pdev);
-+
-+	return 0;
-+}
-+device_initcall(fitblk_init);
---- /dev/null
-+++ b/include/uapi/linux/fitblk.h
-@@ -0,0 +1,10 @@
-+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
-+#ifndef _UAPI_LINUX_FITBLK_H
-+#define _UAPI_LINUX_FITBLK_H
-+
-+/*
-+ * IOCTL commands --- we will commandeer 0x46 ('F')
-+ */
-+#define FITBLK_RELEASE             0x4600
-+
-+#endif /* _UAPI_LINUX_FITBLK_H */
diff --git a/target/linux/generic/pending-6.1/511-init-bypass-device-lookup-for-dev-fit-rootfs.patch b/target/linux/generic/pending-6.1/511-init-bypass-device-lookup-for-dev-fit-rootfs.patch
deleted file mode 100644
index 685a5f9da510..000000000000
--- a/target/linux/generic/pending-6.1/511-init-bypass-device-lookup-for-dev-fit-rootfs.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 5ede3f8aed9a1a579bf7304142600d1f3500add9 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 12 Jun 2023 03:58:42 +0100
-Subject: [PATCH 2/2] init: bypass device lookup for /dev/fit* rootfs
-
-Allow 'rootwait' as /dev/fit* can show up late if the underlaying
-device is probed late.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- init/do_mounts.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -645,7 +645,8 @@ void __init prepare_namespace(void)
- 
- 	if (saved_root_name[0]) {
- 		root_device_name = saved_root_name;
--		if (!strncmp(root_device_name, "mtd", 3) ||
-+		if (!strncmp(root_device_name, "fit", 3) ||
-+		    !strncmp(root_device_name, "mtd", 3) ||
- 		    !strncmp(root_device_name, "ubi", 3)) {
- 			mount_block_root(root_device_name, root_mountflags);
- 			goto out;
diff --git a/target/linux/generic/pending-6.1/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-6.1/530-jffs2_make_lzma_available.patch
deleted file mode 100644
index 5dd47ef38894..000000000000
--- a/target/linux/generic/pending-6.1/530-jffs2_make_lzma_available.patch
+++ /dev/null
@@ -1,5180 +0,0 @@
-From: Alexandros C. Couloumbis <alex@ozo.com>
-Subject: fs: add jffs2/lzma support (not activated by default yet)
-
-lede-commit: c2c88d315fa0e881f8b19da07b62859b915b11b2
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- fs/jffs2/Kconfig             |    9 +
- fs/jffs2/Makefile            |    3 +
- fs/jffs2/compr.c             |    6 +
- fs/jffs2/compr.h             |   10 +-
- fs/jffs2/compr_lzma.c        |  128 +++
- fs/jffs2/super.c             |   33 +-
- include/linux/lzma.h         |   62 ++
- include/linux/lzma/LzFind.h  |  115 +++
- include/linux/lzma/LzHash.h  |   54 +
- include/linux/lzma/LzmaDec.h |  231 +++++
- include/linux/lzma/LzmaEnc.h |   80 ++
- include/linux/lzma/Types.h   |  226 +++++
- include/uapi/linux/jffs2.h   |    1 +
- lib/Kconfig                  |    6 +
- lib/Makefile                 |   12 +
- lib/lzma/LzFind.c            |  761 ++++++++++++++
- lib/lzma/LzmaDec.c           |  999 +++++++++++++++++++
- lib/lzma/LzmaEnc.c           | 2271 ++++++++++++++++++++++++++++++++++++++++++
- lib/lzma/Makefile            |    7 +
- 19 files changed, 5008 insertions(+), 6 deletions(-)
- create mode 100644 fs/jffs2/compr_lzma.c
- create mode 100644 include/linux/lzma.h
- create mode 100644 include/linux/lzma/LzFind.h
- create mode 100644 include/linux/lzma/LzHash.h
- create mode 100644 include/linux/lzma/LzmaDec.h
- create mode 100644 include/linux/lzma/LzmaEnc.h
- create mode 100644 include/linux/lzma/Types.h
- create mode 100644 lib/lzma/LzFind.c
- create mode 100644 lib/lzma/LzmaDec.c
- create mode 100644 lib/lzma/LzmaEnc.c
- create mode 100644 lib/lzma/Makefile
-
---- a/fs/jffs2/Kconfig
-+++ b/fs/jffs2/Kconfig
-@@ -136,6 +136,15 @@ config JFFS2_LZO
- 	  This feature was added in July, 2007. Say 'N' if you need
- 	  compatibility with older bootloaders or kernels.
- 
-+config JFFS2_LZMA
-+	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
-+	select LZMA_COMPRESS
-+	select LZMA_DECOMPRESS
-+	depends on JFFS2_FS
-+	default n
-+	help
-+	  JFFS2 wrapper to the LZMA C SDK
-+
- config JFFS2_RTIME
- 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- 	depends on JFFS2_FS
---- a/fs/jffs2/Makefile
-+++ b/fs/jffs2/Makefile
-@@ -19,4 +19,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
- jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
- jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
- jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
-+jffs2-$(CONFIG_JFFS2_LZMA)	+= compr_lzma.o
- jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
-+
-+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
---- a/fs/jffs2/compr.c
-+++ b/fs/jffs2/compr.c
-@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_init();
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+	jffs2_lzma_init();
-+#endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
- 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
-+#ifdef CONFIG_JFFS2_LZMA
-+	jffs2_lzma_exit();
-+#endif
- #ifdef CONFIG_JFFS2_LZO
- 	jffs2_lzo_exit();
- #endif
---- a/fs/jffs2/compr.h
-+++ b/fs/jffs2/compr.h
-@@ -29,9 +29,9 @@
- #define JFFS2_DYNRUBIN_PRIORITY  20
- #define JFFS2_LZARI_PRIORITY     30
- #define JFFS2_RTIME_PRIORITY     50
--#define JFFS2_ZLIB_PRIORITY      60
--#define JFFS2_LZO_PRIORITY       80
--
-+#define JFFS2_LZMA_PRIORITY      70
-+#define JFFS2_ZLIB_PRIORITY      80
-+#define JFFS2_LZO_PRIORITY       90
- 
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
- #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
-@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
- int jffs2_lzo_init(void);
- void jffs2_lzo_exit(void);
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+int jffs2_lzma_init(void);
-+void jffs2_lzma_exit(void);
-+#endif
- 
- #endif /* __JFFS2_COMPR_H__ */
---- /dev/null
-+++ b/fs/jffs2/compr_lzma.c
-@@ -0,0 +1,128 @@
-+/*
-+ * JFFS2 -- Journalling Flash File System, Version 2.
-+ *
-+ * For licensing information, see the file 'LICENCE' in this directory.
-+ *
-+ * JFFS2 wrapper to the LZMA C SDK
-+ *
-+ */
-+
-+#include <linux/lzma.h>
-+#include "compr.h"
-+
-+#ifdef __KERNEL__
-+	static DEFINE_MUTEX(deflate_mutex);
-+#endif
-+
-+CLzmaEncHandle *p;
-+Byte propsEncoded[LZMA_PROPS_SIZE];
-+SizeT propsSize = sizeof(propsEncoded);
-+
-+STATIC void lzma_free_workspace(void)
-+{
-+	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
-+}
-+
-+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
-+{
-+	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
-+	{
-+		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
-+		return -ENOMEM;
-+	}
-+
-+	if (LzmaEnc_SetProps(p, props) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+
-+	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
-+	{
-+		lzma_free_workspace();
-+		return -1;
-+	}
-+
-+	return 0;
-+}
-+
-+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
-+			      uint32_t *sourcelen, uint32_t *dstlen)
-+{
-+	SizeT compress_size = (SizeT)(*dstlen);
-+	int ret;
-+
-+	#ifdef __KERNEL__
-+		mutex_lock(&deflate_mutex);
-+	#endif
-+
-+	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
-+		0, NULL, &lzma_alloc, &lzma_alloc);
-+
-+	#ifdef __KERNEL__
-+		mutex_unlock(&deflate_mutex);
-+	#endif
-+
-+	if (ret != SZ_OK)
-+		return -1;
-+
-+	*dstlen = (uint32_t)compress_size;
-+
-+	return 0;
-+}
-+
-+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+				 uint32_t srclen, uint32_t destlen)
-+{
-+	int ret;
-+	SizeT dl = (SizeT)destlen;
-+	SizeT sl = (SizeT)srclen;
-+	ELzmaStatus status;
-+
-+	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
-+		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
-+
-+	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static struct jffs2_compressor jffs2_lzma_comp = {
-+	.priority = JFFS2_LZMA_PRIORITY,
-+	.name = "lzma",
-+	.compr = JFFS2_COMPR_LZMA,
-+	.compress = &jffs2_lzma_compress,
-+	.decompress = &jffs2_lzma_decompress,
-+	.disabled = 0,
-+};
-+
-+int INIT jffs2_lzma_init(void)
-+{
-+	int ret;
-+	CLzmaEncProps props;
-+	LzmaEncProps_Init(&props);
-+
-+	props.dictSize = LZMA_BEST_DICT(0x2000);
-+	props.level = LZMA_BEST_LEVEL;
-+	props.lc = LZMA_BEST_LC;
-+	props.lp = LZMA_BEST_LP;
-+	props.pb = LZMA_BEST_PB;
-+	props.fb = LZMA_BEST_FB;
-+
-+	ret = lzma_alloc_workspace(&props);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = jffs2_register_compressor(&jffs2_lzma_comp);
-+	if (ret)
-+		lzma_free_workspace();
-+
-+	return ret;
-+}
-+
-+void jffs2_lzma_exit(void)
-+{
-+	jffs2_unregister_compressor(&jffs2_lzma_comp);
-+	lzma_free_workspace();
-+}
---- a/fs/jffs2/super.c
-+++ b/fs/jffs2/super.c
-@@ -375,14 +375,41 @@ static int __init init_jffs2_fs(void)
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
- 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
- 
--	pr_info("version 2.2."
-+	pr_info("version 2.2"
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- 	       " (NAND)"
- #endif
- #ifdef CONFIG_JFFS2_SUMMARY
--	       " (SUMMARY) "
-+	       " (SUMMARY)"
- #endif
--	       " © 2001-2006 Red Hat, Inc.\n");
-+#ifdef CONFIG_JFFS2_ZLIB
-+	       " (ZLIB)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZO
-+	       " (LZO)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZMA
-+	       " (LZMA)"
-+#endif
-+#ifdef CONFIG_JFFS2_RTIME
-+	       " (RTIME)"
-+#endif
-+#ifdef CONFIG_JFFS2_RUBIN
-+	       " (RUBIN)"
-+#endif
-+#ifdef  CONFIG_JFFS2_CMODE_NONE
-+	       " (CMODE_NONE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_PRIORITY
-+	       " (CMODE_PRIORITY)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_SIZE
-+	       " (CMODE_SIZE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
-+	       " (CMODE_FAVOURLZO)"
-+#endif
-+	       " (c) 2001-2006 Red Hat, Inc.\n");
- 
- 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
- 					     sizeof(struct jffs2_inode_info),
---- /dev/null
-+++ b/include/linux/lzma.h
-@@ -0,0 +1,62 @@
-+#ifndef __LZMA_H__
-+#define __LZMA_H__
-+
-+#ifdef __KERNEL__
-+	#include <linux/kernel.h>
-+	#include <linux/sched.h>
-+	#include <linux/slab.h>
-+	#include <linux/vmalloc.h>
-+	#include <linux/init.h>
-+	#define LZMA_MALLOC vmalloc
-+	#define LZMA_FREE vfree
-+	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
-+	#define INIT __init
-+	#define STATIC static
-+#else
-+	#include <stdint.h>
-+	#include <stdlib.h>
-+	#include <stdio.h>
-+	#include <unistd.h>
-+	#include <string.h>
-+	#include <asm/types.h>
-+	#include <errno.h>
-+	#include <linux/jffs2.h>
-+	#ifndef PAGE_SIZE
-+		extern int page_size;
-+		#define PAGE_SIZE page_size
-+	#endif
-+	#define LZMA_MALLOC malloc
-+	#define LZMA_FREE free
-+	#define PRINT_ERROR(msg) fprintf(stderr, msg)
-+	#define INIT
-+	#define STATIC
-+#endif
-+
-+#include "lzma/LzmaDec.h"
-+#include "lzma/LzmaEnc.h"
-+
-+#define LZMA_BEST_LEVEL (9)
-+#define LZMA_BEST_LC    (0)
-+#define LZMA_BEST_LP    (0)
-+#define LZMA_BEST_PB    (0)
-+#define LZMA_BEST_FB  (273)
-+
-+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
-+
-+static void *p_lzma_malloc(void *p, size_t size)
-+{
-+	if (size == 0)
-+		return NULL;
-+
-+	return LZMA_MALLOC(size);
-+}
-+
-+static void p_lzma_free(void *p, void *address)
-+{
-+	if (address != NULL)
-+		LZMA_FREE(address);
-+}
-+
-+static ISzAlloc lzma_alloc = { .Alloc = p_lzma_malloc, .Free = p_lzma_free };
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzFind.h
-@@ -0,0 +1,115 @@
-+/* LzFind.h -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_FIND_H
-+#define __LZ_FIND_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+typedef UInt32 CLzRef;
-+
-+typedef struct _CMatchFinder
-+{
-+  Byte *buffer;
-+  UInt32 pos;
-+  UInt32 posLimit;
-+  UInt32 streamPos;
-+  UInt32 lenLimit;
-+
-+  UInt32 cyclicBufferPos;
-+  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
-+
-+  UInt32 matchMaxLen;
-+  CLzRef *hash;
-+  CLzRef *son;
-+  UInt32 hashMask;
-+  UInt32 cutValue;
-+
-+  Byte *bufferBase;
-+  ISeqInStream *stream;
-+  int streamEndWasReached;
-+
-+  UInt32 blockSize;
-+  UInt32 keepSizeBefore;
-+  UInt32 keepSizeAfter;
-+
-+  UInt32 numHashBytes;
-+  int directInput;
-+  size_t directInputRem;
-+  int btMode;
-+  int bigHash;
-+  UInt32 historySize;
-+  UInt32 fixedHashSize;
-+  UInt32 hashSizeSum;
-+  UInt32 numSons;
-+  SRes result;
-+  UInt32 crc[256];
-+} CMatchFinder;
-+
-+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
-+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
-+
-+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-+
-+int MatchFinder_NeedMove(CMatchFinder *p);
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
-+void MatchFinder_MoveBlock(CMatchFinder *p);
-+void MatchFinder_ReadIfRequired(CMatchFinder *p);
-+
-+void MatchFinder_Construct(CMatchFinder *p);
-+
-+/* Conditions:
-+     historySize <= 3 GB
-+     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
-+*/
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc);
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
-+    UInt32 *distances, UInt32 maxLen);
-+
-+/*
-+Conditions:
-+  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
-+  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
-+*/
-+
-+typedef void (*Mf_Init_Func)(void *object);
-+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
-+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
-+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
-+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
-+typedef void (*Mf_Skip_Func)(void *object, UInt32);
-+
-+typedef struct _IMatchFinder
-+{
-+  Mf_Init_Func Init;
-+  Mf_GetIndexByte_Func GetIndexByte;
-+  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
-+  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
-+  Mf_GetMatches_Func GetMatches;
-+  Mf_Skip_Func Skip;
-+} IMatchFinder;
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-+
-+void MatchFinder_Init(CMatchFinder *p);
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzHash.h
-@@ -0,0 +1,54 @@
-+/* LzHash.h -- HASH functions for LZ algorithms
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_HASH_H
-+#define __LZ_HASH_H
-+
-+#define kHash2Size (1 << 10)
-+#define kHash3Size (1 << 16)
-+#define kHash4Size (1 << 20)
-+
-+#define kFix3HashSize (kHash2Size)
-+#define kFix4HashSize (kHash2Size + kHash3Size)
-+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
-+
-+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
-+
-+#define HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
-+
-+#define HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
-+
-+#define HASH5_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
-+  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
-+  hash4Value &= (kHash4Size - 1); }
-+
-+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
-+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
-+
-+
-+#define MT_HASH2_CALC \
-+  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
-+
-+#define MT_HASH3_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
-+
-+#define MT_HASH4_CALC { \
-+  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+  hash2Value = temp & (kHash2Size - 1); \
-+  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -0,0 +1,231 @@
-+/* LzmaDec.h -- LZMA Decoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_DEC_H
-+#define __LZMA_DEC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* #define _LZMA_PROB32 */
-+/* _LZMA_PROB32 can increase the speed on some CPUs,
-+   but memory usage for CLzmaDec::probs will be doubled in that case */
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+
-+/* ---------- LZMA Properties ---------- */
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaProps
-+{
-+  unsigned lc, lp, pb;
-+  UInt32 dicSize;
-+} CLzmaProps;
-+
-+/* LzmaProps_Decode - decodes properties
-+Returns:
-+  SZ_OK
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
-+
-+
-+/* ---------- LZMA Decoder state ---------- */
-+
-+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
-+   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-+
-+#define LZMA_REQUIRED_INPUT_MAX 20
-+
-+typedef struct
-+{
-+  CLzmaProps prop;
-+  CLzmaProb *probs;
-+  Byte *dic;
-+  const Byte *buf;
-+  UInt32 range, code;
-+  SizeT dicPos;
-+  SizeT dicBufSize;
-+  UInt32 processedPos;
-+  UInt32 checkDicSize;
-+  unsigned state;
-+  UInt32 reps[4];
-+  unsigned remainLen;
-+  int needFlush;
-+  int needInitState;
-+  UInt32 numProbs;
-+  unsigned tempBufSize;
-+  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
-+} CLzmaDec;
-+
-+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-+
-+void LzmaDec_Init(CLzmaDec *p);
-+
-+/* There are two types of LZMA streams:
-+     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-+     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-+
-+typedef enum
-+{
-+  LZMA_FINISH_ANY,   /* finish at any point */
-+  LZMA_FINISH_END    /* block must be finished at the end */
-+} ELzmaFinishMode;
-+
-+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-+
-+   You must use LZMA_FINISH_END, when you know that current output buffer
-+   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-+
-+   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
-+   and output value of destLen will be less than output buffer size limit.
-+   You can check status result also.
-+
-+   You can use multiple checks to test data integrity after full decompression:
-+     1) Check Result and "status" variable.
-+     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
-+     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
-+        You must use correct finish mode in that case. */
-+
-+typedef enum
-+{
-+  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
-+  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
-+  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
-+  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
-+  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
-+} ELzmaStatus;
-+
-+/* ELzmaStatus is used only as output value for function call */
-+
-+
-+/* ---------- Interfaces ---------- */
-+
-+/* There are 3 levels of interfaces:
-+     1) Dictionary Interface
-+     2) Buffer Interface
-+     3) One Call Interface
-+   You can select any of these interfaces, but don't mix functions from different
-+   groups for same object. */
-+
-+
-+/* There are two variants to allocate state for Dictionary Interface:
-+     1) LzmaDec_Allocate / LzmaDec_Free
-+     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-+   You can use variant 2, if you set dictionary buffer manually.
-+   For Buffer Interface you must always use variant 1.
-+
-+LzmaDec_Allocate* can return:
-+  SZ_OK
-+  SZ_ERROR_MEM         - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
-+
-+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
-+
-+/* ---------- Dictionary Interface ---------- */
-+
-+/* You can use it, if you want to eliminate the overhead for data copying from
-+   dictionary to some other external buffer.
-+   You must work with CLzmaDec variables directly in this interface.
-+
-+   STEPS:
-+     LzmaDec_Constr()
-+     LzmaDec_Allocate()
-+     for (each new stream)
-+     {
-+       LzmaDec_Init()
-+       while (it needs more decompression)
-+       {
-+         LzmaDec_DecodeToDic()
-+         use data from CLzmaDec::dic and update CLzmaDec::dicPos
-+       }
-+     }
-+     LzmaDec_Free()
-+*/
-+
-+/* LzmaDec_DecodeToDic
-+
-+   The decoding to internal dictionary buffer (CLzmaDec::dic).
-+   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (dicLimit).
-+  LZMA_FINISH_ANY - Decode just dicLimit bytes.
-+  LZMA_FINISH_END - Stream must be finished after dicLimit.
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_NEEDS_MORE_INPUT
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+*/
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- Buffer Interface ---------- */
-+
-+/* It's zlib-like interface.
-+   See LzmaDec_DecodeToDic description for information about STEPS and return results,
-+   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-+   to work with CLzmaDec variables manually.
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+*/
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-+    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaDecode
-+
-+finishMode:
-+  It has meaning only if the decoding reaches output limit (*destLen).
-+  LZMA_FINISH_ANY - Decode just destLen bytes.
-+  LZMA_FINISH_END - Stream must be finished after (*destLen).
-+
-+Returns:
-+  SZ_OK
-+    status:
-+      LZMA_STATUS_FINISHED_WITH_MARK
-+      LZMA_STATUS_NOT_FINISHED
-+      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+  SZ_ERROR_DATA - Data error
-+  SZ_ERROR_MEM  - Memory allocation error
-+  SZ_ERROR_UNSUPPORTED - Unsupported properties
-+  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
-+*/
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -0,0 +1,80 @@
-+/*  LzmaEnc.h -- LZMA Encoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_ENC_H
-+#define __LZMA_ENC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaEncProps
-+{
-+  int level;       /*  0 <= level <= 9 */
-+  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
-+                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
-+                       default = (1 << 24) */
-+  int lc;          /* 0 <= lc <= 8, default = 3 */
-+  int lp;          /* 0 <= lp <= 4, default = 0 */
-+  int pb;          /* 0 <= pb <= 4, default = 2 */
-+  int algo;        /* 0 - fast, 1 - normal, default = 1 */
-+  int fb;          /* 5 <= fb <= 273, default = 32 */
-+  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
-+  int numHashBytes; /* 2, 3 or 4, default = 4 */
-+  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
-+  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
-+  int numThreads;  /* 1 or 2, default = 2 */
-+} CLzmaEncProps;
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p);
-+void LzmaEncProps_Normalize(CLzmaEncProps *p);
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
-+
-+
-+/* ---------- CLzmaEncHandle Interface ---------- */
-+
-+/* LzmaEnc_* functions can return the following exit codes:
-+Returns:
-+  SZ_OK           - OK
-+  SZ_ERROR_MEM    - Memory allocation error
-+  SZ_ERROR_PARAM  - Incorrect paramater in props
-+  SZ_ERROR_WRITE  - Write callback error.
-+  SZ_ERROR_PROGRESS - some break from progress callback
-+  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+typedef void * CLzmaEncHandle;
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
-+SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaEncode
-+Return code:
-+  SZ_OK               - OK
-+  SZ_ERROR_MEM        - Memory allocation error
-+  SZ_ERROR_PARAM      - Incorrect paramater
-+  SZ_ERROR_OUTPUT_EOF - output buffer overflow
-+  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
-+*/
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/Types.h
-@@ -0,0 +1,226 @@
-+/* Types.h -- Basic types
-+2009-11-23 : Igor Pavlov : Public domain */
-+
-+#ifndef __7Z_TYPES_H
-+#define __7Z_TYPES_H
-+
-+#include <stddef.h>
-+
-+#ifdef _WIN32
-+#include <windows.h>
-+#endif
-+
-+#ifndef EXTERN_C_BEGIN
-+#ifdef __cplusplus
-+#define EXTERN_C_BEGIN extern "C" {
-+#define EXTERN_C_END }
-+#else
-+#define EXTERN_C_BEGIN
-+#define EXTERN_C_END
-+#endif
-+#endif
-+
-+EXTERN_C_BEGIN
-+
-+#define SZ_OK 0
-+
-+#define SZ_ERROR_DATA 1
-+#define SZ_ERROR_MEM 2
-+#define SZ_ERROR_CRC 3
-+#define SZ_ERROR_UNSUPPORTED 4
-+#define SZ_ERROR_PARAM 5
-+#define SZ_ERROR_INPUT_EOF 6
-+#define SZ_ERROR_OUTPUT_EOF 7
-+#define SZ_ERROR_READ 8
-+#define SZ_ERROR_WRITE 9
-+#define SZ_ERROR_PROGRESS 10
-+#define SZ_ERROR_FAIL 11
-+#define SZ_ERROR_THREAD 12
-+
-+#define SZ_ERROR_ARCHIVE 16
-+#define SZ_ERROR_NO_ARCHIVE 17
-+
-+typedef int SRes;
-+
-+#ifdef _WIN32
-+typedef DWORD WRes;
-+#else
-+typedef int WRes;
-+#endif
-+
-+#ifndef RINOK
-+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
-+#endif
-+
-+typedef unsigned char Byte;
-+typedef short Int16;
-+typedef unsigned short UInt16;
-+
-+#ifdef _LZMA_UINT32_IS_ULONG
-+typedef long Int32;
-+typedef unsigned long UInt32;
-+#else
-+typedef int Int32;
-+typedef unsigned int UInt32;
-+#endif
-+
-+#ifdef _SZ_NO_INT_64
-+
-+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
-+   NOTES: Some code will work incorrectly in that case! */
-+
-+typedef long Int64;
-+typedef unsigned long UInt64;
-+
-+#else
-+
-+#if defined(_MSC_VER) || defined(__BORLANDC__)
-+typedef __int64 Int64;
-+typedef unsigned __int64 UInt64;
-+#else
-+typedef long long int Int64;
-+typedef unsigned long long int UInt64;
-+#endif
-+
-+#endif
-+
-+#ifdef _LZMA_NO_SYSTEM_SIZE_T
-+typedef UInt32 SizeT;
-+#else
-+typedef size_t SizeT;
-+#endif
-+
-+typedef int Bool;
-+#define True 1
-+#define False 0
-+
-+
-+#ifdef _WIN32
-+#define MY_STD_CALL __stdcall
-+#else
-+#define MY_STD_CALL
-+#endif
-+
-+#ifdef _MSC_VER
-+
-+#if _MSC_VER >= 1300
-+#define MY_NO_INLINE __declspec(noinline)
-+#else
-+#define MY_NO_INLINE
-+#endif
-+
-+#define MY_CDECL __cdecl
-+#define MY_FAST_CALL __fastcall
-+
-+#else
-+
-+#define MY_CDECL
-+#define MY_FAST_CALL
-+
-+#endif
-+
-+
-+/* The following interfaces use first parameter as pointer to structure */
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) < input(*size)) is allowed */
-+} ISeqInStream;
-+
-+/* it can return SZ_ERROR_INPUT_EOF */
-+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
-+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
-+
-+typedef struct
-+{
-+  size_t (*Write)(void *p, const void *buf, size_t size);
-+    /* Returns: result - the number of actually written bytes.
-+       (result < size) means error */
-+} ISeqOutStream;
-+
-+typedef enum
-+{
-+  SZ_SEEK_SET = 0,
-+  SZ_SEEK_CUR = 1,
-+  SZ_SEEK_END = 2
-+} ESzSeek;
-+
-+typedef struct
-+{
-+  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ISeekInStream;
-+
-+typedef struct
-+{
-+  SRes (*Look)(void *p, void **buf, size_t *size);
-+    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+       (output(*size) > input(*size)) is not allowed
-+       (output(*size) < input(*size)) is allowed */
-+  SRes (*Skip)(void *p, size_t offset);
-+    /* offset must be <= output(*size) of Look */
-+
-+  SRes (*Read)(void *p, void *buf, size_t *size);
-+    /* reads directly (without buffer). It's same as ISeqInStream::Read */
-+  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ILookInStream;
-+
-+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
-+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
-+
-+/* reads via ILookInStream::Read */
-+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
-+
-+#define LookToRead_BUF_SIZE (1 << 14)
-+
-+typedef struct
-+{
-+  ILookInStream s;
-+  ISeekInStream *realStream;
-+  size_t pos;
-+  size_t size;
-+  Byte buf[LookToRead_BUF_SIZE];
-+} CLookToRead;
-+
-+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
-+void LookToRead_Init(CLookToRead *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToLook;
-+
-+void SecToLook_CreateVTable(CSecToLook *p);
-+
-+typedef struct
-+{
-+  ISeqInStream s;
-+  ILookInStream *realStream;
-+} CSecToRead;
-+
-+void SecToRead_CreateVTable(CSecToRead *p);
-+
-+typedef struct
-+{
-+  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
-+    /* Returns: result. (result != SZ_OK) means break.
-+       Value (UInt64)(Int64)-1 for size means unknown value. */
-+} ICompressProgress;
-+
-+typedef struct
-+{
-+  void *(*Alloc)(void *p, size_t size);
-+  void (*Free)(void *p, void *address); /* address can be 0 */
-+} ISzAlloc;
-+
-+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
-+#define IAlloc_Free(p, a) (p)->Free((p), a)
-+
-+EXTERN_C_END
-+
-+#endif
---- a/include/uapi/linux/jffs2.h
-+++ b/include/uapi/linux/jffs2.h
-@@ -46,6 +46,7 @@
- #define JFFS2_COMPR_DYNRUBIN	0x05
- #define JFFS2_COMPR_ZLIB	0x06
- #define JFFS2_COMPR_LZO		0x07
-+#define JFFS2_COMPR_LZMA	0x08
- /* Compatibility flags. */
- #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
- #define JFFS2_NODE_ACCURATE 0x2000
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -354,6 +354,12 @@ config ZSTD_DECOMPRESS
- 
- source "lib/xz/Kconfig"
- 
-+config LZMA_COMPRESS
-+    tristate
-+
-+config LZMA_DECOMPRESS
-+    tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -140,6 +140,16 @@ CFLAGS_kobject.o += -DDEBUG
- CFLAGS_kobject_uevent.o += -DDEBUG
- endif
- 
-+ifdef CONFIG_JFFS2_ZLIB
-+  CONFIG_ZLIB_INFLATE:=y
-+  CONFIG_ZLIB_DEFLATE:=y
-+endif
-+
-+ifdef CONFIG_JFFS2_LZMA
-+  CONFIG_LZMA_DECOMPRESS:=y
-+  CONFIG_LZMA_COMPRESS:=y
-+endif
-+
- obj-$(CONFIG_DEBUG_INFO_REDUCED) += debug_info.o
- CFLAGS_debug_info.o += $(call cc-option, -femit-struct-debug-detailed=any)
- 
-@@ -200,6 +210,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
- obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
- obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma/
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
- 
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/lib/lzma/LzFind.c
-@@ -0,0 +1,761 @@
-+/* LzFind.c -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+#include "LzFind.h"
-+#include "LzHash.h"
-+
-+#define kEmptyHashValue 0
-+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
-+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
-+#define kNormalizeMask (~(kNormalizeStepMin - 1))
-+#define kMaxHistorySize ((UInt32)3 << 30)
-+
-+#define kStartMaxLen 3
-+
-+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  if (!p->directInput)
-+  {
-+    alloc->Free(alloc, p->bufferBase);
-+    p->bufferBase = 0;
-+  }
-+}
-+
-+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
-+
-+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
-+{
-+  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-+  if (p->directInput)
-+  {
-+    p->blockSize = blockSize;
-+    return 1;
-+  }
-+  if (p->bufferBase == 0 || p->blockSize != blockSize)
-+  {
-+    LzInWindow_Free(p, alloc);
-+    p->blockSize = blockSize;
-+    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
-+  }
-+  return (p->bufferBase != 0);
-+}
-+
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+
-+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+{
-+  p->posLimit -= subValue;
-+  p->pos -= subValue;
-+  p->streamPos -= subValue;
-+}
-+
-+static void MatchFinder_ReadBlock(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached || p->result != SZ_OK)
-+    return;
-+  if (p->directInput)
-+  {
-+    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-+    if (curSize > p->directInputRem)
-+      curSize = (UInt32)p->directInputRem;
-+    p->directInputRem -= curSize;
-+    p->streamPos += curSize;
-+    if (p->directInputRem == 0)
-+      p->streamEndWasReached = 1;
-+    return;
-+  }
-+  for (;;)
-+  {
-+    Byte *dest = p->buffer + (p->streamPos - p->pos);
-+    size_t size = (p->bufferBase + p->blockSize - dest);
-+    if (size == 0)
-+      return;
-+    p->result = p->stream->Read(p->stream, dest, &size);
-+    if (p->result != SZ_OK)
-+      return;
-+    if (size == 0)
-+    {
-+      p->streamEndWasReached = 1;
-+      return;
-+    }
-+    p->streamPos += (UInt32)size;
-+    if (p->streamPos - p->pos > p->keepSizeAfter)
-+      return;
-+  }
-+}
-+
-+void MatchFinder_MoveBlock(CMatchFinder *p)
-+{
-+  memmove(p->bufferBase,
-+    p->buffer - p->keepSizeBefore,
-+    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
-+  p->buffer = p->bufferBase + p->keepSizeBefore;
-+}
-+
-+int MatchFinder_NeedMove(CMatchFinder *p)
-+{
-+  if (p->directInput)
-+    return 0;
-+  /* if (p->streamEndWasReached) return 0; */
-+  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
-+}
-+
-+void MatchFinder_ReadIfRequired(CMatchFinder *p)
-+{
-+  if (p->streamEndWasReached)
-+    return;
-+  if (p->keepSizeAfter >= p->streamPos - p->pos)
-+    MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
-+{
-+  if (MatchFinder_NeedMove(p))
-+    MatchFinder_MoveBlock(p);
-+  MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
-+{
-+  p->cutValue = 32;
-+  p->btMode = 1;
-+  p->numHashBytes = 4;
-+  p->bigHash = 0;
-+}
-+
-+#define kCrcPoly 0xEDB88320
-+
-+void MatchFinder_Construct(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  p->bufferBase = 0;
-+  p->directInput = 0;
-+  p->hash = 0;
-+  MatchFinder_SetDefaultSettings(p);
-+
-+  for (i = 0; i < 256; i++)
-+  {
-+    UInt32 r = i;
-+    int j;
-+    for (j = 0; j < 8; j++)
-+      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
-+    p->crc[i] = r;
-+  }
-+}
-+
-+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->hash);
-+  p->hash = 0;
-+}
-+
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+  MatchFinder_FreeThisClassMemory(p, alloc);
-+  LzInWindow_Free(p, alloc);
-+}
-+
-+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
-+{
-+  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
-+  if (sizeInBytes / sizeof(CLzRef) != num)
-+    return 0;
-+  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
-+}
-+
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+    ISzAlloc *alloc)
-+{
-+  UInt32 sizeReserv;
-+  if (historySize > kMaxHistorySize)
-+  {
-+    MatchFinder_Free(p, alloc);
-+    return 0;
-+  }
-+  sizeReserv = historySize >> 1;
-+  if (historySize > ((UInt32)2 << 30))
-+    sizeReserv = historySize >> 2;
-+  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
-+
-+  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
-+  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
-+  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
-+  if (LzInWindow_Create(p, sizeReserv, alloc))
-+  {
-+    UInt32 newCyclicBufferSize = historySize + 1;
-+    UInt32 hs;
-+    p->matchMaxLen = matchMaxLen;
-+    {
-+      p->fixedHashSize = 0;
-+      if (p->numHashBytes == 2)
-+        hs = (1 << 16) - 1;
-+      else
-+      {
-+        hs = historySize - 1;
-+        hs |= (hs >> 1);
-+        hs |= (hs >> 2);
-+        hs |= (hs >> 4);
-+        hs |= (hs >> 8);
-+        hs >>= 1;
-+        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
-+        if (hs > (1 << 24))
-+        {
-+          if (p->numHashBytes == 3)
-+            hs = (1 << 24) - 1;
-+          else
-+            hs >>= 1;
-+        }
-+      }
-+      p->hashMask = hs;
-+      hs++;
-+      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
-+      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
-+      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
-+      hs += p->fixedHashSize;
-+    }
-+
-+    {
-+      UInt32 prevSize = p->hashSizeSum + p->numSons;
-+      UInt32 newSize;
-+      p->historySize = historySize;
-+      p->hashSizeSum = hs;
-+      p->cyclicBufferSize = newCyclicBufferSize;
-+      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
-+      newSize = p->hashSizeSum + p->numSons;
-+      if (p->hash != 0 && prevSize == newSize)
-+        return 1;
-+      MatchFinder_FreeThisClassMemory(p, alloc);
-+      p->hash = AllocRefs(newSize, alloc);
-+      if (p->hash != 0)
-+      {
-+        p->son = p->hash + p->hashSizeSum;
-+        return 1;
-+      }
-+    }
-+  }
-+  MatchFinder_Free(p, alloc);
-+  return 0;
-+}
-+
-+static void MatchFinder_SetLimits(CMatchFinder *p)
-+{
-+  UInt32 limit = kMaxValForNormalize - p->pos;
-+  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  limit2 = p->streamPos - p->pos;
-+  if (limit2 <= p->keepSizeAfter)
-+  {
-+    if (limit2 > 0)
-+      limit2 = 1;
-+  }
-+  else
-+    limit2 -= p->keepSizeAfter;
-+  if (limit2 < limit)
-+    limit = limit2;
-+  {
-+    UInt32 lenLimit = p->streamPos - p->pos;
-+    if (lenLimit > p->matchMaxLen)
-+      lenLimit = p->matchMaxLen;
-+    p->lenLimit = lenLimit;
-+  }
-+  p->posLimit = p->pos + limit;
-+}
-+
-+void MatchFinder_Init(CMatchFinder *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < p->hashSizeSum; i++)
-+    p->hash[i] = kEmptyHashValue;
-+  p->cyclicBufferPos = 0;
-+  p->buffer = p->bufferBase;
-+  p->pos = p->streamPos = p->cyclicBufferSize;
-+  p->result = SZ_OK;
-+  p->streamEndWasReached = 0;
-+  MatchFinder_ReadBlock(p);
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
-+{
-+  return (p->pos - p->historySize - 1) & kNormalizeMask;
-+}
-+
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+{
-+  UInt32 i;
-+  for (i = 0; i < numItems; i++)
-+  {
-+    UInt32 value = items[i];
-+    if (value <= subValue)
-+      value = kEmptyHashValue;
-+    else
-+      value -= subValue;
-+    items[i] = value;
-+  }
-+}
-+
-+static void MatchFinder_Normalize(CMatchFinder *p)
-+{
-+  UInt32 subValue = MatchFinder_GetSubValue(p);
-+  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
-+  MatchFinder_ReduceOffsets(p, subValue);
-+}
-+
-+static void MatchFinder_CheckLimits(CMatchFinder *p)
-+{
-+  if (p->pos == kMaxValForNormalize)
-+    MatchFinder_Normalize(p);
-+  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
-+    MatchFinder_CheckAndMoveAndRead(p);
-+  if (p->cyclicBufferPos == p->cyclicBufferSize)
-+    p->cyclicBufferPos = 0;
-+  MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  son[_cyclicBufferPos] = curMatch;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+      return distances;
-+    {
-+      const Byte *pb = cur - delta;
-+      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
-+      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
-+      {
-+        UInt32 len = 0;
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+            return distances;
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+    UInt32 *distances, UInt32 maxLen)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return distances;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        if (++len != lenLimit && pb[len] == cur[len])
-+          while (++len != lenLimit)
-+            if (pb[len] != cur[len])
-+              break;
-+        if (maxLen < len)
-+        {
-+          *distances++ = maxLen = len;
-+          *distances++ = delta - 1;
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return distances;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
-+{
-+  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+  UInt32 len0 = 0, len1 = 0;
-+  for (;;)
-+  {
-+    UInt32 delta = pos - curMatch;
-+    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+    {
-+      *ptr0 = *ptr1 = kEmptyHashValue;
-+      return;
-+    }
-+    {
-+      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+      const Byte *pb = cur - delta;
-+      UInt32 len = (len0 < len1 ? len0 : len1);
-+      if (pb[len] == cur[len])
-+      {
-+        while (++len != lenLimit)
-+          if (pb[len] != cur[len])
-+            break;
-+        {
-+          if (len == lenLimit)
-+          {
-+            *ptr1 = pair[0];
-+            *ptr0 = pair[1];
-+            return;
-+          }
-+        }
-+      }
-+      if (pb[len] < cur[len])
-+      {
-+        *ptr1 = curMatch;
-+        ptr1 = pair + 1;
-+        curMatch = *ptr1;
-+        len1 = len;
-+      }
-+      else
-+      {
-+        *ptr0 = curMatch;
-+        ptr0 = pair;
-+        curMatch = *ptr0;
-+        len0 = len;
-+      }
-+    }
-+  }
-+}
-+
-+#define MOVE_POS \
-+  ++p->cyclicBufferPos; \
-+  p->buffer++; \
-+  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-+
-+#define MOVE_POS_RET MOVE_POS return offset;
-+
-+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-+
-+#define GET_MATCHES_HEADER2(minLen, ret_op) \
-+  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-+  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-+  cur = p->buffer;
-+
-+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
-+#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
-+
-+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
-+
-+#define GET_MATCHES_FOOTER(offset, maxLen) \
-+  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
-+  distances + offset, maxLen) - distances); MOVE_POS_RET;
-+
-+#define SKIP_FOOTER \
-+  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
-+
-+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(2)
-+  HASH2_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 1)
-+}
-+
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = 0;
-+  GET_MATCHES_FOOTER(offset, 2)
-+}
-+
-+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, delta2, maxLen, offset;
-+  GET_MATCHES_HEADER(3)
-+
-+  HASH3_CALC;
-+
-+  delta2 = p->pos - p->hash[hash2Value];
-+  curMatch = p->hash[kFix3HashSize + hashValue];
-+
-+  p->hash[hash2Value] =
-+  p->hash[kFix3HashSize + hashValue] = p->pos;
-+
-+
-+  maxLen = 2;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[0] = maxLen;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+  GET_MATCHES_HEADER(4)
-+
-+  HASH4_CALC;
-+
-+  delta2 = p->pos - p->hash[                hash2Value];
-+  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+  curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+  p->hash[                hash2Value] =
-+  p->hash[kFix3HashSize + hash3Value] =
-+  p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+  maxLen = 1;
-+  offset = 0;
-+  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+  {
-+    distances[0] = maxLen = 2;
-+    distances[1] = delta2 - 1;
-+    offset = 2;
-+  }
-+  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+  {
-+    maxLen = 3;
-+    distances[offset + 1] = delta3 - 1;
-+    offset += 2;
-+    delta2 = delta3;
-+  }
-+  if (offset != 0)
-+  {
-+    for (; maxLen != lenLimit; maxLen++)
-+      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+        break;
-+    distances[offset - 2] = maxLen;
-+    if (maxLen == lenLimit)
-+    {
-+      p->son[p->cyclicBufferPos] = curMatch;
-+      MOVE_POS_RET;
-+    }
-+  }
-+  if (maxLen < 3)
-+    maxLen = 3;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances + offset, maxLen) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+  UInt32 offset;
-+  GET_MATCHES_HEADER(3)
-+  HASH_ZIP_CALC;
-+  curMatch = p->hash[hashValue];
-+  p->hash[hashValue] = p->pos;
-+  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+    distances, 2) - (distances));
-+  MOVE_POS_RET
-+}
-+
-+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(2)
-+    HASH2_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value;
-+    SKIP_HEADER(3)
-+    HASH3_CALC;
-+    curMatch = p->hash[kFix3HashSize + hashValue];
-+    p->hash[hash2Value] =
-+    p->hash[kFix3HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] = p->pos;
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    SKIP_FOOTER
-+  }
-+  while (--num != 0);
-+}
-+
-+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    UInt32 hash2Value, hash3Value;
-+    SKIP_HEADER(4)
-+    HASH4_CALC;
-+    curMatch = p->hash[kFix4HashSize + hashValue];
-+    p->hash[                hash2Value] =
-+    p->hash[kFix3HashSize + hash3Value] =
-+    p->hash[kFix4HashSize + hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+  do
-+  {
-+    SKIP_HEADER(3)
-+    HASH_ZIP_CALC;
-+    curMatch = p->hash[hashValue];
-+    p->hash[hashValue] = p->pos;
-+    p->son[p->cyclicBufferPos] = curMatch;
-+    MOVE_POS
-+  }
-+  while (--num != 0);
-+}
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
-+{
-+  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-+  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-+  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-+  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-+  if (!p->btMode)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 2)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
-+  }
-+  else if (p->numHashBytes == 3)
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
-+  }
-+  else
-+  {
-+    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-+  }
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaDec.c
-@@ -0,0 +1,999 @@
-+/* LzmaDec.c -- LZMA Decoder
-+2009-09-20 : Igor Pavlov : Public domain */
-+
-+#include "LzmaDec.h"
-+
-+#include <string.h>
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+#define RC_INIT_SIZE 5
-+
-+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
-+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
-+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
-+  { UPDATE_0(p); i = (i + i); A0; } else \
-+  { UPDATE_1(p); i = (i + i) + 1; A1; }
-+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
-+
-+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
-+#define TREE_DECODE(probs, limit, i) \
-+  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
-+
-+/* #define _LZMA_SIZE_OPT */
-+
-+#ifdef _LZMA_SIZE_OPT
-+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
-+#else
-+#define TREE_6_DECODE(probs, i) \
-+  { i = 1; \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  TREE_GET_BIT(probs, i); \
-+  i -= 0x40; }
-+#endif
-+
-+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0_CHECK range = bound;
-+#define UPDATE_1_CHECK range -= bound; code -= bound;
-+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
-+  { UPDATE_0_CHECK; i = (i + i); A0; } else \
-+  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
-+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
-+#define TREE_DECODE_CHECK(probs, limit, i) \
-+  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
-+
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-+
-+
-+#define kNumStates 12
-+#define kNumLitStates 7
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#define LZMA_DIC_MIN (1 << 12)
-+
-+/* First LZMA-symbol is always decoded.
-+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
-+Out:
-+  Result:
-+    SZ_OK - OK
-+    SZ_ERROR_DATA - Error
-+  p->remainLen:
-+    < kMatchSpecLenStart : normal remain
-+    = kMatchSpecLenStart : finished
-+    = kMatchSpecLenStart + 1 : Flush marker
-+    = kMatchSpecLenStart + 2 : State Init Marker
-+*/
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  CLzmaProb *probs = p->probs;
-+
-+  unsigned state = p->state;
-+  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
-+  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
-+  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
-+  unsigned lc = p->prop.lc;
-+
-+  Byte *dic = p->dic;
-+  SizeT dicBufSize = p->dicBufSize;
-+  SizeT dicPos = p->dicPos;
-+
-+  UInt32 processedPos = p->processedPos;
-+  UInt32 checkDicSize = p->checkDicSize;
-+  unsigned len = 0;
-+
-+  const Byte *buf = p->buf;
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+
-+  do
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = processedPos & pbMask;
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0(prob)
-+    {
-+      unsigned symbol;
-+      UPDATE_0(prob);
-+      prob = probs + Literal;
-+      if (checkDicSize != 0 || processedPos != 0)
-+        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
-+        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        state -= (state < 4) ? state : 3;
-+        symbol = 1;
-+        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        state -= (state < 10) ? 3 : 6;
-+        symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      dic[dicPos++] = (Byte)symbol;
-+      processedPos++;
-+      continue;
-+    }
-+    else
-+    {
-+      UPDATE_1(prob);
-+      prob = probs + IsRep + state;
-+      IF_BIT_0(prob)
-+      {
-+        UPDATE_0(prob);
-+        state += kNumStates;
-+        prob = probs + LenCoder;
-+      }
-+      else
-+      {
-+        UPDATE_1(prob);
-+        if (checkDicSize == 0 && processedPos == 0)
-+          return SZ_ERROR_DATA;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0(prob)
-+        {
-+          UPDATE_0(prob);
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+            dicPos++;
-+            processedPos++;
-+            state = state < kNumLitStates ? 9 : 11;
-+            continue;
-+          }
-+          UPDATE_1(prob);
-+        }
-+        else
-+        {
-+          UInt32 distance;
-+          UPDATE_1(prob);
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0(prob)
-+          {
-+            UPDATE_0(prob);
-+            distance = rep1;
-+          }
-+          else
-+          {
-+            UPDATE_1(prob);
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0(prob)
-+            {
-+              UPDATE_0(prob);
-+              distance = rep2;
-+            }
-+            else
-+            {
-+              UPDATE_1(prob);
-+              distance = rep3;
-+              rep3 = rep2;
-+            }
-+            rep2 = rep1;
-+          }
-+          rep1 = rep0;
-+          rep0 = distance;
-+        }
-+        state = state < kNumLitStates ? 8 : 11;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0(probLen)
-+        {
-+          UPDATE_0(probLen);
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = (1 << kLenNumLowBits);
-+        }
-+        else
-+        {
-+          UPDATE_1(probLen);
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0(probLen)
-+          {
-+            UPDATE_0(probLen);
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = (1 << kLenNumMidBits);
-+          }
-+          else
-+          {
-+            UPDATE_1(probLen);
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = (1 << kLenNumHighBits);
-+          }
-+        }
-+        TREE_DECODE(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state >= kNumStates)
-+      {
-+        UInt32 distance;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
-+        TREE_6_DECODE(prob, distance);
-+        if (distance >= kStartPosModelIndex)
-+        {
-+          unsigned posSlot = (unsigned)distance;
-+          int numDirectBits = (int)(((distance >> 1) - 1));
-+          distance = (2 | (distance & 1));
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            distance <<= numDirectBits;
-+            prob = probs + SpecPos + distance - posSlot - 1;
-+            {
-+              UInt32 mask = 1;
-+              unsigned i = 1;
-+              do
-+              {
-+                GET_BIT2(prob + i, i, ; , distance |= mask);
-+                mask <<= 1;
-+              }
-+              while (--numDirectBits != 0);
-+            }
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE
-+              range >>= 1;
-+
-+              {
-+                UInt32 t;
-+                code -= range;
-+                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
-+                distance = (distance << 1) + (t + 1);
-+                code += range & t;
-+              }
-+              /*
-+              distance <<= 1;
-+              if (code >= range)
-+              {
-+                code -= range;
-+                distance |= 1;
-+              }
-+              */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            distance <<= kNumAlignBits;
-+            {
-+              unsigned i = 1;
-+              GET_BIT2(prob + i, i, ; , distance |= 1);
-+              GET_BIT2(prob + i, i, ; , distance |= 2);
-+              GET_BIT2(prob + i, i, ; , distance |= 4);
-+              GET_BIT2(prob + i, i, ; , distance |= 8);
-+            }
-+            if (distance == (UInt32)0xFFFFFFFF)
-+            {
-+              len += kMatchSpecLenStart;
-+              state -= kNumStates;
-+              break;
-+            }
-+          }
-+        }
-+        rep3 = rep2;
-+        rep2 = rep1;
-+        rep1 = rep0;
-+        rep0 = distance + 1;
-+        if (checkDicSize == 0)
-+        {
-+          if (distance >= processedPos)
-+            return SZ_ERROR_DATA;
-+        }
-+        else if (distance >= checkDicSize)
-+          return SZ_ERROR_DATA;
-+        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
-+      }
-+
-+      len += kMatchMinLen;
-+
-+      if (limit == dicPos)
-+        return SZ_ERROR_DATA;
-+      {
-+        SizeT rem = limit - dicPos;
-+        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
-+        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
-+
-+        processedPos += curLen;
-+
-+        len -= curLen;
-+        if (pos + curLen <= dicBufSize)
-+        {
-+          Byte *dest = dic + dicPos;
-+          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
-+          const Byte *lim = dest + curLen;
-+          dicPos += curLen;
-+          do
-+            *(dest) = (Byte)*(dest + src);
-+          while (++dest != lim);
-+        }
-+        else
-+        {
-+          do
-+          {
-+            dic[dicPos++] = dic[pos];
-+            if (++pos == dicBufSize)
-+              pos = 0;
-+          }
-+          while (--curLen != 0);
-+        }
-+      }
-+    }
-+  }
-+  while (dicPos < limit && buf < bufLimit);
-+  NORMALIZE;
-+  p->buf = buf;
-+  p->range = range;
-+  p->code = code;
-+  p->remainLen = len;
-+  p->dicPos = dicPos;
-+  p->processedPos = processedPos;
-+  p->reps[0] = rep0;
-+  p->reps[1] = rep1;
-+  p->reps[2] = rep2;
-+  p->reps[3] = rep3;
-+  p->state = state;
-+
-+  return SZ_OK;
-+}
-+
-+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
-+{
-+  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
-+  {
-+    Byte *dic = p->dic;
-+    SizeT dicPos = p->dicPos;
-+    SizeT dicBufSize = p->dicBufSize;
-+    unsigned len = p->remainLen;
-+    UInt32 rep0 = p->reps[0];
-+    if (limit - dicPos < len)
-+      len = (unsigned)(limit - dicPos);
-+
-+    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
-+      p->checkDicSize = p->prop.dicSize;
-+
-+    p->processedPos += len;
-+    p->remainLen -= len;
-+    while (len-- != 0)
-+    {
-+      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+      dicPos++;
-+    }
-+    p->dicPos = dicPos;
-+  }
-+}
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+  do
-+  {
-+    SizeT limit2 = limit;
-+    if (p->checkDicSize == 0)
-+    {
-+      UInt32 rem = p->prop.dicSize - p->processedPos;
-+      if (limit - p->dicPos > rem)
-+        limit2 = p->dicPos + rem;
-+    }
-+    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
-+    if (p->processedPos >= p->prop.dicSize)
-+      p->checkDicSize = p->prop.dicSize;
-+    LzmaDec_WriteRem(p, limit);
-+  }
-+  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
-+
-+  if (p->remainLen > kMatchSpecLenStart)
-+  {
-+    p->remainLen = kMatchSpecLenStart;
-+  }
-+  return 0;
-+}
-+
-+typedef enum
-+{
-+  DUMMY_ERROR, /* unexpected end of input stream */
-+  DUMMY_LIT,
-+  DUMMY_MATCH,
-+  DUMMY_REP
-+} ELzmaDummy;
-+
-+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
-+{
-+  UInt32 range = p->range;
-+  UInt32 code = p->code;
-+  const Byte *bufLimit = buf + inSize;
-+  CLzmaProb *probs = p->probs;
-+  unsigned state = p->state;
-+  ELzmaDummy res;
-+
-+  {
-+    CLzmaProb *prob;
-+    UInt32 bound;
-+    unsigned ttt;
-+    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
-+
-+    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+    IF_BIT_0_CHECK(prob)
-+    {
-+      UPDATE_0_CHECK
-+
-+      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
-+
-+      prob = probs + Literal;
-+      if (p->checkDicSize != 0 || p->processedPos != 0)
-+        prob += (LZMA_LIT_SIZE *
-+          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
-+          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
-+
-+      if (state < kNumLitStates)
-+      {
-+        unsigned symbol = 1;
-+        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
-+      }
-+      else
-+      {
-+        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
-+            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
-+        unsigned offs = 0x100;
-+        unsigned symbol = 1;
-+        do
-+        {
-+          unsigned bit;
-+          CLzmaProb *probLit;
-+          matchByte <<= 1;
-+          bit = (matchByte & offs);
-+          probLit = prob + offs + bit + symbol;
-+          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
-+        }
-+        while (symbol < 0x100);
-+      }
-+      res = DUMMY_LIT;
-+    }
-+    else
-+    {
-+      unsigned len;
-+      UPDATE_1_CHECK;
-+
-+      prob = probs + IsRep + state;
-+      IF_BIT_0_CHECK(prob)
-+      {
-+        UPDATE_0_CHECK;
-+        state = 0;
-+        prob = probs + LenCoder;
-+        res = DUMMY_MATCH;
-+      }
-+      else
-+      {
-+        UPDATE_1_CHECK;
-+        res = DUMMY_REP;
-+        prob = probs + IsRepG0 + state;
-+        IF_BIT_0_CHECK(prob)
-+        {
-+          UPDATE_0_CHECK;
-+          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+            NORMALIZE_CHECK;
-+            return DUMMY_REP;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+          }
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          prob = probs + IsRepG1 + state;
-+          IF_BIT_0_CHECK(prob)
-+          {
-+            UPDATE_0_CHECK;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            prob = probs + IsRepG2 + state;
-+            IF_BIT_0_CHECK(prob)
-+            {
-+              UPDATE_0_CHECK;
-+            }
-+            else
-+            {
-+              UPDATE_1_CHECK;
-+            }
-+          }
-+        }
-+        state = kNumStates;
-+        prob = probs + RepLenCoder;
-+      }
-+      {
-+        unsigned limit, offset;
-+        CLzmaProb *probLen = prob + LenChoice;
-+        IF_BIT_0_CHECK(probLen)
-+        {
-+          UPDATE_0_CHECK;
-+          probLen = prob + LenLow + (posState << kLenNumLowBits);
-+          offset = 0;
-+          limit = 1 << kLenNumLowBits;
-+        }
-+        else
-+        {
-+          UPDATE_1_CHECK;
-+          probLen = prob + LenChoice2;
-+          IF_BIT_0_CHECK(probLen)
-+          {
-+            UPDATE_0_CHECK;
-+            probLen = prob + LenMid + (posState << kLenNumMidBits);
-+            offset = kLenNumLowSymbols;
-+            limit = 1 << kLenNumMidBits;
-+          }
-+          else
-+          {
-+            UPDATE_1_CHECK;
-+            probLen = prob + LenHigh;
-+            offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+            limit = 1 << kLenNumHighBits;
-+          }
-+        }
-+        TREE_DECODE_CHECK(probLen, limit, len);
-+        len += offset;
-+      }
-+
-+      if (state < 4)
-+      {
-+        unsigned posSlot;
-+        prob = probs + PosSlot +
-+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
-+            kNumPosSlotBits);
-+        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          int numDirectBits = ((posSlot >> 1) - 1);
-+
-+          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
-+
-+          if (posSlot < kEndPosModelIndex)
-+          {
-+            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
-+          }
-+          else
-+          {
-+            numDirectBits -= kNumAlignBits;
-+            do
-+            {
-+              NORMALIZE_CHECK
-+              range >>= 1;
-+              code -= range & (((code - range) >> 31) - 1);
-+              /* if (code >= range) code -= range; */
-+            }
-+            while (--numDirectBits != 0);
-+            prob = probs + Align;
-+            numDirectBits = kNumAlignBits;
-+          }
-+          {
-+            unsigned i = 1;
-+            do
-+            {
-+              GET_BIT_CHECK(prob + i, i);
-+            }
-+            while (--numDirectBits != 0);
-+          }
-+        }
-+      }
-+    }
-+  }
-+  NORMALIZE_CHECK;
-+  return res;
-+}
-+
-+
-+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
-+{
-+  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
-+  p->range = 0xFFFFFFFF;
-+  p->needFlush = 0;
-+}
-+
-+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+{
-+  p->needFlush = 1;
-+  p->remainLen = 0;
-+  p->tempBufSize = 0;
-+
-+  if (initDic)
-+  {
-+    p->processedPos = 0;
-+    p->checkDicSize = 0;
-+    p->needInitState = 1;
-+  }
-+  if (initState)
-+    p->needInitState = 1;
-+}
-+
-+void LzmaDec_Init(CLzmaDec *p)
-+{
-+  p->dicPos = 0;
-+  LzmaDec_InitDicAndState(p, True, True);
-+}
-+
-+static void LzmaDec_InitStateReal(CLzmaDec *p)
-+{
-+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
-+  UInt32 i;
-+  CLzmaProb *probs = p->probs;
-+  for (i = 0; i < numProbs; i++)
-+    probs[i] = kBitModelTotal >> 1;
-+  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
-+  p->state = 0;
-+  p->needInitState = 0;
-+}
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+    ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT inSize = *srcLen;
-+  (*srcLen) = 0;
-+  LzmaDec_WriteRem(p, dicLimit);
-+
-+  *status = LZMA_STATUS_NOT_SPECIFIED;
-+
-+  while (p->remainLen != kMatchSpecLenStart)
-+  {
-+      int checkEndMarkNow;
-+
-+      if (p->needFlush != 0)
-+      {
-+        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
-+          p->tempBuf[p->tempBufSize++] = *src++;
-+        if (p->tempBufSize < RC_INIT_SIZE)
-+        {
-+          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+          return SZ_OK;
-+        }
-+        if (p->tempBuf[0] != 0)
-+          return SZ_ERROR_DATA;
-+
-+        LzmaDec_InitRc(p, p->tempBuf);
-+        p->tempBufSize = 0;
-+      }
-+
-+      checkEndMarkNow = 0;
-+      if (p->dicPos >= dicLimit)
-+      {
-+        if (p->remainLen == 0 && p->code == 0)
-+        {
-+          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
-+          return SZ_OK;
-+        }
-+        if (finishMode == LZMA_FINISH_ANY)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_OK;
-+        }
-+        if (p->remainLen != 0)
-+        {
-+          *status = LZMA_STATUS_NOT_FINISHED;
-+          return SZ_ERROR_DATA;
-+        }
-+        checkEndMarkNow = 1;
-+      }
-+
-+      if (p->needInitState)
-+        LzmaDec_InitStateReal(p);
-+
-+      if (p->tempBufSize == 0)
-+      {
-+        SizeT processed;
-+        const Byte *bufLimit;
-+        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            memcpy(p->tempBuf, src, inSize);
-+            p->tempBufSize = (unsigned)inSize;
-+            (*srcLen) += inSize;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+          bufLimit = src;
-+        }
-+        else
-+          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
-+        p->buf = src;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
-+          return SZ_ERROR_DATA;
-+        processed = (SizeT)(p->buf - src);
-+        (*srcLen) += processed;
-+        src += processed;
-+        inSize -= processed;
-+      }
-+      else
-+      {
-+        unsigned rem = p->tempBufSize, lookAhead = 0;
-+        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
-+          p->tempBuf[rem++] = src[lookAhead++];
-+        p->tempBufSize = rem;
-+        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+        {
-+          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
-+          if (dummyRes == DUMMY_ERROR)
-+          {
-+            (*srcLen) += lookAhead;
-+            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+            return SZ_OK;
-+          }
-+          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+          {
-+            *status = LZMA_STATUS_NOT_FINISHED;
-+            return SZ_ERROR_DATA;
-+          }
-+        }
-+        p->buf = p->tempBuf;
-+        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
-+          return SZ_ERROR_DATA;
-+        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
-+        (*srcLen) += lookAhead;
-+        src += lookAhead;
-+        inSize -= lookAhead;
-+        p->tempBufSize = 0;
-+      }
-+  }
-+  if (p->code == 0)
-+    *status = LZMA_STATUS_FINISHED_WITH_MARK;
-+  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
-+}
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+  SizeT outSize = *destLen;
-+  SizeT inSize = *srcLen;
-+  *srcLen = *destLen = 0;
-+  for (;;)
-+  {
-+    SizeT inSizeCur = inSize, outSizeCur, dicPos;
-+    ELzmaFinishMode curFinishMode;
-+    SRes res;
-+    if (p->dicPos == p->dicBufSize)
-+      p->dicPos = 0;
-+    dicPos = p->dicPos;
-+    if (outSize > p->dicBufSize - dicPos)
-+    {
-+      outSizeCur = p->dicBufSize;
-+      curFinishMode = LZMA_FINISH_ANY;
-+    }
-+    else
-+    {
-+      outSizeCur = dicPos + outSize;
-+      curFinishMode = finishMode;
-+    }
-+
-+    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
-+    src += inSizeCur;
-+    inSize -= inSizeCur;
-+    *srcLen += inSizeCur;
-+    outSizeCur = p->dicPos - dicPos;
-+    memcpy(dest, p->dic + dicPos, outSizeCur);
-+    dest += outSizeCur;
-+    outSize -= outSizeCur;
-+    *destLen += outSizeCur;
-+    if (res != 0)
-+      return res;
-+    if (outSizeCur == 0 || outSize == 0)
-+      return SZ_OK;
-+  }
-+}
-+
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->probs);
-+  p->probs = 0;
-+}
-+
-+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->dic);
-+  p->dic = 0;
-+}
-+
-+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+  LzmaDec_FreeProbs(p, alloc);
-+  LzmaDec_FreeDict(p, alloc);
-+}
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+{
-+  UInt32 dicSize;
-+  Byte d;
-+
-+  if (size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_UNSUPPORTED;
-+  else
-+    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
-+
-+  if (dicSize < LZMA_DIC_MIN)
-+    dicSize = LZMA_DIC_MIN;
-+  p->dicSize = dicSize;
-+
-+  d = data[0];
-+  if (d >= (9 * 5 * 5))
-+    return SZ_ERROR_UNSUPPORTED;
-+
-+  p->lc = d % 9;
-+  d /= 9;
-+  p->pb = d / 5;
-+  p->lp = d % 5;
-+
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
-+{
-+  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
-+  if (p->probs == 0 || numProbs != p->numProbs)
-+  {
-+    LzmaDec_FreeProbs(p, alloc);
-+    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
-+    p->numProbs = numProbs;
-+    if (p->probs == 0)
-+      return SZ_ERROR_MEM;
-+  }
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+  CLzmaProps propNew;
-+  SizeT dicBufSize;
-+  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+  dicBufSize = propNew.dicSize;
-+  if (p->dic == 0 || dicBufSize != p->dicBufSize)
-+  {
-+    LzmaDec_FreeDict(p, alloc);
-+    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
-+    if (p->dic == 0)
-+    {
-+      LzmaDec_FreeProbs(p, alloc);
-+      return SZ_ERROR_MEM;
-+    }
-+  }
-+  p->dicBufSize = dicBufSize;
-+  p->prop = propNew;
-+  return SZ_OK;
-+}
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+    ELzmaStatus *status, ISzAlloc *alloc)
-+{
-+  CLzmaDec p;
-+  SRes res;
-+  SizeT inSize = *srcLen;
-+  SizeT outSize = *destLen;
-+  *srcLen = *destLen = 0;
-+  if (inSize < RC_INIT_SIZE)
-+    return SZ_ERROR_INPUT_EOF;
-+
-+  LzmaDec_Construct(&p);
-+  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
-+  if (res != 0)
-+    return res;
-+  p.dic = dest;
-+  p.dicBufSize = outSize;
-+
-+  LzmaDec_Init(&p);
-+
-+  *srcLen = inSize;
-+  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
-+
-+  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
-+    res = SZ_ERROR_INPUT_EOF;
-+
-+  (*destLen) = p.dicPos;
-+  LzmaDec_FreeProbs(&p, alloc);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaEnc.c
-@@ -0,0 +1,2271 @@
-+/* LzmaEnc.c -- LZMA Encoder
-+2009-11-24 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+/* #define SHOW_STAT */
-+/* #define SHOW_STAT2 */
-+
-+#if defined(SHOW_STAT) || defined(SHOW_STAT2)
-+#include <stdio.h>
-+#endif
-+
-+#include "LzmaEnc.h"
-+
-+/* disable MT */
-+#define _7ZIP_ST
-+
-+#include "LzFind.h"
-+#ifndef _7ZIP_ST
-+#include "LzFindMt.h"
-+#endif
-+
-+#ifdef SHOW_STAT
-+static int ttt = 0;
-+#endif
-+
-+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
-+
-+#define kBlockSize (9 << 10)
-+#define kUnpackBlockSize (1 << 18)
-+#define kMatchArraySize (1 << 21)
-+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
-+
-+#define kNumMaxDirectBits (31)
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+#define kProbInitValue (kBitModelTotal >> 1)
-+
-+#define kNumMoveReducingBits 4
-+#define kNumBitPriceShiftBits 4
-+#define kBitPrice (1 << kNumBitPriceShiftBits)
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p)
-+{
-+  p->level = 5;
-+  p->dictSize = p->mc = 0;
-+  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
-+  p->writeEndMark = 0;
-+}
-+
-+void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+{
-+  int level = p->level;
-+  if (level < 0) level = 5;
-+  p->level = level;
-+  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
-+  if (p->lc < 0) p->lc = 3;
-+  if (p->lp < 0) p->lp = 0;
-+  if (p->pb < 0) p->pb = 2;
-+  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
-+  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
-+  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
-+  if (p->numHashBytes < 0) p->numHashBytes = 4;
-+  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
-+  if (p->numThreads < 0)
-+    p->numThreads =
-+      #ifndef _7ZIP_ST
-+      ((p->btMode && p->algo) ? 2 : 1);
-+      #else
-+      1;
-+      #endif
-+}
-+
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+{
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+  return props.dictSize;
-+}
-+
-+/* #define LZMA_LOG_BSR */
-+/* Define it for Intel's CPU */
-+
-+
-+#ifdef LZMA_LOG_BSR
-+
-+#define kDicLogSizeMaxCompress 30
-+
-+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-+
-+UInt32 GetPosSlot1(UInt32 pos)
-+{
-+  UInt32 res;
-+  BSR2_RET(pos, res);
-+  return res;
-+}
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
-+
-+#else
-+
-+#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
-+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-+
-+void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+{
-+  int c = 2, slotFast;
-+  g_FastPos[0] = 0;
-+  g_FastPos[1] = 1;
-+
-+  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
-+  {
-+    UInt32 k = (1 << ((slotFast >> 1) - 1));
-+    UInt32 j;
-+    for (j = 0; j < k; j++, c++)
-+      g_FastPos[c] = (Byte)slotFast;
-+  }
-+}
-+
-+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
-+  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
-+  res = p->g_FastPos[pos >> i] + (i * 2); }
-+/*
-+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
-+  p->g_FastPos[pos >> 6] + 12 : \
-+  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
-+*/
-+
-+#define GetPosSlot1(pos) p->g_FastPos[pos]
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
-+
-+#endif
-+
-+
-+#define LZMA_NUM_REPS 4
-+
-+typedef unsigned CState;
-+
-+typedef struct
-+{
-+  UInt32 price;
-+
-+  CState state;
-+  int prev1IsChar;
-+  int prev2;
-+
-+  UInt32 posPrev2;
-+  UInt32 backPrev2;
-+
-+  UInt32 posPrev;
-+  UInt32 backPrev;
-+  UInt32 backs[LZMA_NUM_REPS];
-+} COptimal;
-+
-+#define kNumOpts (1 << 12)
-+
-+#define kNumLenToPosStates 4
-+#define kNumPosSlotBits 6
-+#define kDicLogSizeMin 0
-+#define kDicLogSizeMax 32
-+#define kDistTableSizeMax (kDicLogSizeMax * 2)
-+
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+#define kAlignMask (kAlignTableSize - 1)
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
-+
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+#define LZMA_PB_MAX 4
-+#define LZMA_LC_MAX 8
-+#define LZMA_LP_MAX 4
-+
-+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
-+
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define LZMA_MATCH_LEN_MIN 2
-+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
-+
-+#define kNumStates 12
-+
-+typedef struct
-+{
-+  CLzmaProb choice;
-+  CLzmaProb choice2;
-+  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
-+  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
-+  CLzmaProb high[kLenNumHighSymbols];
-+} CLenEnc;
-+
-+typedef struct
-+{
-+  CLenEnc p;
-+  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
-+  UInt32 tableSize;
-+  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
-+} CLenPriceEnc;
-+
-+typedef struct
-+{
-+  UInt32 range;
-+  Byte cache;
-+  UInt64 low;
-+  UInt64 cacheSize;
-+  Byte *buf;
-+  Byte *bufLim;
-+  Byte *bufBase;
-+  ISeqOutStream *outStream;
-+  UInt64 processed;
-+  SRes res;
-+} CRangeEnc;
-+
-+typedef struct
-+{
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+} CSaveState;
-+
-+typedef struct
-+{
-+  IMatchFinder matchFinder;
-+  void *matchFinderObj;
-+
-+  #ifndef _7ZIP_ST
-+  Bool mtMode;
-+  CMatchFinderMt matchFinderMt;
-+  #endif
-+
-+  CMatchFinder matchFinderBase;
-+
-+  #ifndef _7ZIP_ST
-+  Byte pad[128];
-+  #endif
-+
-+  UInt32 optimumEndIndex;
-+  UInt32 optimumCurrentIndex;
-+
-+  UInt32 longestMatchLength;
-+  UInt32 numPairs;
-+  UInt32 numAvail;
-+  COptimal opt[kNumOpts];
-+
-+  #ifndef LZMA_LOG_BSR
-+  Byte g_FastPos[1 << kNumLogBits];
-+  #endif
-+
-+  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
-+  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
-+  UInt32 numFastBytes;
-+  UInt32 additionalOffset;
-+  UInt32 reps[LZMA_NUM_REPS];
-+  UInt32 state;
-+
-+  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
-+  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
-+  UInt32 alignPrices[kAlignTableSize];
-+  UInt32 alignPriceCount;
-+
-+  UInt32 distTableSize;
-+
-+  unsigned lc, lp, pb;
-+  unsigned lpMask, pbMask;
-+
-+  CLzmaProb *litProbs;
-+
-+  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+  CLzmaProb isRep[kNumStates];
-+  CLzmaProb isRepG0[kNumStates];
-+  CLzmaProb isRepG1[kNumStates];
-+  CLzmaProb isRepG2[kNumStates];
-+  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+  CLenPriceEnc lenEnc;
-+  CLenPriceEnc repLenEnc;
-+
-+  unsigned lclp;
-+
-+  Bool fastMode;
-+
-+  CRangeEnc rc;
-+
-+  Bool writeEndMark;
-+  UInt64 nowPos64;
-+  UInt32 matchPriceCount;
-+  Bool finished;
-+  Bool multiThread;
-+
-+  SRes result;
-+  UInt32 dictSize;
-+  UInt32 matchFinderCycles;
-+
-+  int needInit;
-+
-+  CSaveState saveState;
-+} CLzmaEnc;
-+
-+void LzmaEnc_SaveState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CSaveState *dest = &p->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
-+}
-+
-+void LzmaEnc_RestoreState(CLzmaEncHandle pp)
-+{
-+  CLzmaEnc *dest = (CLzmaEnc *)pp;
-+  const CSaveState *p = &dest->saveState;
-+  int i;
-+  dest->lenEnc = p->lenEnc;
-+  dest->repLenEnc = p->repLenEnc;
-+  dest->state = p->state;
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+  }
-+  for (i = 0; i < kNumLenToPosStates; i++)
-+    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+  memcpy(dest->reps, p->reps, sizeof(p->reps));
-+  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
-+}
-+
-+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  CLzmaEncProps props = *props2;
-+  LzmaEncProps_Normalize(&props);
-+
-+  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
-+      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
-+    return SZ_ERROR_PARAM;
-+  p->dictSize = props.dictSize;
-+  p->matchFinderCycles = props.mc;
-+  {
-+    unsigned fb = props.fb;
-+    if (fb < 5)
-+      fb = 5;
-+    if (fb > LZMA_MATCH_LEN_MAX)
-+      fb = LZMA_MATCH_LEN_MAX;
-+    p->numFastBytes = fb;
-+  }
-+  p->lc = props.lc;
-+  p->lp = props.lp;
-+  p->pb = props.pb;
-+  p->fastMode = (props.algo == 0);
-+  p->matchFinderBase.btMode = props.btMode;
-+  {
-+    UInt32 numHashBytes = 4;
-+    if (props.btMode)
-+    {
-+      if (props.numHashBytes < 2)
-+        numHashBytes = 2;
-+      else if (props.numHashBytes < 4)
-+        numHashBytes = props.numHashBytes;
-+    }
-+    p->matchFinderBase.numHashBytes = numHashBytes;
-+  }
-+
-+  p->matchFinderBase.cutValue = props.mc;
-+
-+  p->writeEndMark = props.writeEndMark;
-+
-+  #ifndef _7ZIP_ST
-+  /*
-+  if (newMultiThread != _multiThread)
-+  {
-+    ReleaseMatchFinder();
-+    _multiThread = newMultiThread;
-+  }
-+  */
-+  p->multiThread = (props.numThreads > 1);
-+  #endif
-+
-+  return SZ_OK;
-+}
-+
-+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
-+static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
-+static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
-+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
-+
-+#define IsCharState(s) ((s) < 7)
-+
-+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
-+
-+#define kInfinityPrice (1 << 30)
-+
-+static void RangeEnc_Construct(CRangeEnc *p)
-+{
-+  p->outStream = 0;
-+  p->bufBase = 0;
-+}
-+
-+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
-+
-+#define RC_BUF_SIZE (1 << 16)
-+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  if (p->bufBase == 0)
-+  {
-+    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
-+    if (p->bufBase == 0)
-+      return 0;
-+    p->bufLim = p->bufBase + RC_BUF_SIZE;
-+  }
-+  return 1;
-+}
-+
-+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->bufBase);
-+  p->bufBase = 0;
-+}
-+
-+static void RangeEnc_Init(CRangeEnc *p)
-+{
-+  /* Stream.Init(); */
-+  p->low = 0;
-+  p->range = 0xFFFFFFFF;
-+  p->cacheSize = 1;
-+  p->cache = 0;
-+
-+  p->buf = p->bufBase;
-+
-+  p->processed = 0;
-+  p->res = SZ_OK;
-+}
-+
-+static void RangeEnc_FlushStream(CRangeEnc *p)
-+{
-+  size_t num;
-+  if (p->res != SZ_OK)
-+    return;
-+  num = p->buf - p->bufBase;
-+  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
-+    p->res = SZ_ERROR_WRITE;
-+  p->processed += num;
-+  p->buf = p->bufBase;
-+}
-+
-+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
-+{
-+  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
-+  {
-+    Byte temp = p->cache;
-+    do
-+    {
-+      Byte *buf = p->buf;
-+      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
-+      p->buf = buf;
-+      if (buf == p->bufLim)
-+        RangeEnc_FlushStream(p);
-+      temp = 0xFF;
-+    }
-+    while (--p->cacheSize != 0);
-+    p->cache = (Byte)((UInt32)p->low >> 24);
-+  }
-+  p->cacheSize++;
-+  p->low = (UInt32)p->low << 8;
-+}
-+
-+static void RangeEnc_FlushData(CRangeEnc *p)
-+{
-+  int i;
-+  for (i = 0; i < 5; i++)
-+    RangeEnc_ShiftLow(p);
-+}
-+
-+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
-+{
-+  do
-+  {
-+    p->range >>= 1;
-+    p->low += p->range & (0 - ((value >> --numBits) & 1));
-+    if (p->range < kTopValue)
-+    {
-+      p->range <<= 8;
-+      RangeEnc_ShiftLow(p);
-+    }
-+  }
-+  while (numBits != 0);
-+}
-+
-+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
-+{
-+  UInt32 ttt = *prob;
-+  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
-+  if (symbol == 0)
-+  {
-+    p->range = newBound;
-+    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
-+  }
-+  else
-+  {
-+    p->low += newBound;
-+    p->range -= newBound;
-+    ttt -= ttt >> kNumMoveBits;
-+  }
-+  *prob = (CLzmaProb)ttt;
-+  if (p->range < kTopValue)
-+  {
-+    p->range <<= 8;
-+    RangeEnc_ShiftLow(p);
-+  }
-+}
-+
-+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
-+{
-+  symbol |= 0x100;
-+  do
-+  {
-+    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
-+{
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+}
-+
-+void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+{
-+  UInt32 i;
-+  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-+  {
-+    const int kCyclesBits = kNumBitPriceShiftBits;
-+    UInt32 w = i;
-+    UInt32 bitCount = 0;
-+    int j;
-+    for (j = 0; j < kCyclesBits; j++)
-+    {
-+      w = w * w;
-+      bitCount <<= 1;
-+      while (w >= ((UInt32)1 << 16))
-+      {
-+        w >>= 1;
-+        bitCount++;
-+      }
-+    }
-+    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
-+  }
-+}
-+
-+
-+#define GET_PRICE(prob, symbol) \
-+  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICEa(prob, symbol) \
-+  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= 0x100;
-+  do
-+  {
-+    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 offs = 0x100;
-+  symbol |= 0x100;
-+  do
-+  {
-+    matchByte <<= 1;
-+    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
-+    symbol <<= 1;
-+    offs &= ~(matchByte ^ symbol);
-+  }
-+  while (symbol < 0x10000);
-+  return price;
-+}
-+
-+
-+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0;)
-+  {
-+    UInt32 bit;
-+    i--;
-+    bit = (symbol >> i) & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+  }
-+}
-+
-+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+  UInt32 m = 1;
-+  int i;
-+  for (i = 0; i < numBitLevels; i++)
-+  {
-+    UInt32 bit = symbol & 1;
-+    RangeEnc_EncodeBit(rc, probs + m, bit);
-+    m = (m << 1) | bit;
-+    symbol >>= 1;
-+  }
-+}
-+
-+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  symbol |= (1 << numBitLevels);
-+  while (symbol != 1)
-+  {
-+    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
-+    symbol >>= 1;
-+  }
-+  return price;
-+}
-+
-+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+  UInt32 price = 0;
-+  UInt32 m = 1;
-+  int i;
-+  for (i = numBitLevels; i != 0; i--)
-+  {
-+    UInt32 bit = symbol & 1;
-+    symbol >>= 1;
-+    price += GET_PRICEa(probs[m], bit);
-+    m = (m << 1) | bit;
-+  }
-+  return price;
-+}
-+
-+
-+static void LenEnc_Init(CLenEnc *p)
-+{
-+  unsigned i;
-+  p->choice = p->choice2 = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
-+    p->low[i] = kProbInitValue;
-+  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
-+    p->mid[i] = kProbInitValue;
-+  for (i = 0; i < kLenNumHighSymbols; i++)
-+    p->high[i] = kProbInitValue;
-+}
-+
-+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
-+{
-+  if (symbol < kLenNumLowSymbols)
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 0);
-+    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
-+  }
-+  else
-+  {
-+    RangeEnc_EncodeBit(rc, &p->choice, 1);
-+    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 0);
-+      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(rc, &p->choice2, 1);
-+      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
-+    }
-+  }
-+}
-+
-+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
-+{
-+  UInt32 a0 = GET_PRICE_0a(p->choice);
-+  UInt32 a1 = GET_PRICE_1a(p->choice);
-+  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
-+  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
-+  UInt32 i = 0;
-+  for (i = 0; i < kLenNumLowSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
-+  }
-+  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
-+  {
-+    if (i >= numSymbols)
-+      return;
-+    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
-+  }
-+  for (; i < numSymbols; i++)
-+    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
-+}
-+
-+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
-+{
-+  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
-+  p->counters[posState] = p->tableSize;
-+}
-+
-+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
-+{
-+  UInt32 posState;
-+  for (posState = 0; posState < numPosStates; posState++)
-+    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
-+{
-+  LenEnc_Encode(&p->p, rc, symbol, posState);
-+  if (updatePrice)
-+    if (--p->counters[posState] == 0)
-+      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+
-+
-+
-+static void MovePos(CLzmaEnc *p, UInt32 num)
-+{
-+  #ifdef SHOW_STAT
-+  ttt += num;
-+  printf("\n MovePos %d", num);
-+  #endif
-+  if (num != 0)
-+  {
-+    p->additionalOffset += num;
-+    p->matchFinder.Skip(p->matchFinderObj, num);
-+  }
-+}
-+
-+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
-+{
-+  UInt32 lenRes = 0, numPairs;
-+  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
-+  #ifdef SHOW_STAT
-+  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
-+  ttt++;
-+  {
-+    UInt32 i;
-+    for (i = 0; i < numPairs; i += 2)
-+      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
-+  }
-+  #endif
-+  if (numPairs > 0)
-+  {
-+    lenRes = p->matches[numPairs - 2];
-+    if (lenRes == p->numFastBytes)
-+    {
-+      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+      UInt32 distance = p->matches[numPairs - 1] + 1;
-+      UInt32 numAvail = p->numAvail;
-+      if (numAvail > LZMA_MATCH_LEN_MAX)
-+        numAvail = LZMA_MATCH_LEN_MAX;
-+      {
-+        const Byte *pby2 = pby - distance;
-+        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
-+      }
-+    }
-+  }
-+  p->additionalOffset++;
-+  *numDistancePairsRes = numPairs;
-+  return lenRes;
-+}
-+
-+
-+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
-+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
-+#define IsShortRep(p) ((p)->backPrev == 0)
-+
-+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
-+{
-+  return
-+    GET_PRICE_0(p->isRepG0[state]) +
-+    GET_PRICE_0(p->isRep0Long[state][posState]);
-+}
-+
-+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
-+{
-+  UInt32 price;
-+  if (repIndex == 0)
-+  {
-+    price = GET_PRICE_0(p->isRepG0[state]);
-+    price += GET_PRICE_1(p->isRep0Long[state][posState]);
-+  }
-+  else
-+  {
-+    price = GET_PRICE_1(p->isRepG0[state]);
-+    if (repIndex == 1)
-+      price += GET_PRICE_0(p->isRepG1[state]);
-+    else
-+    {
-+      price += GET_PRICE_1(p->isRepG1[state]);
-+      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
-+    }
-+  }
-+  return price;
-+}
-+
-+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
-+{
-+  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
-+    GetPureRepPrice(p, repIndex, state, posState);
-+}
-+
-+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
-+{
-+  UInt32 posMem = p->opt[cur].posPrev;
-+  UInt32 backMem = p->opt[cur].backPrev;
-+  p->optimumEndIndex = cur;
-+  do
-+  {
-+    if (p->opt[cur].prev1IsChar)
-+    {
-+      MakeAsChar(&p->opt[posMem])
-+      p->opt[posMem].posPrev = posMem - 1;
-+      if (p->opt[cur].prev2)
-+      {
-+        p->opt[posMem - 1].prev1IsChar = False;
-+        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
-+        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
-+      }
-+    }
-+    {
-+      UInt32 posPrev = posMem;
-+      UInt32 backCur = backMem;
-+
-+      backMem = p->opt[posPrev].backPrev;
-+      posMem = p->opt[posPrev].posPrev;
-+
-+      p->opt[posPrev].backPrev = backCur;
-+      p->opt[posPrev].posPrev = cur;
-+      cur = posPrev;
-+    }
-+  }
-+  while (cur != 0);
-+  *backRes = p->opt[0].backPrev;
-+  p->optimumCurrentIndex  = p->opt[0].posPrev;
-+  return p->optimumCurrentIndex;
-+}
-+
-+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
-+
-+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
-+  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
-+  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
-+  UInt32 *matches;
-+  const Byte *data;
-+  Byte curByte, matchByte;
-+  if (p->optimumEndIndex != p->optimumCurrentIndex)
-+  {
-+    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
-+    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
-+    *backRes = opt->backPrev;
-+    p->optimumCurrentIndex = opt->posPrev;
-+    return lenRes;
-+  }
-+  p->optimumCurrentIndex = p->optimumEndIndex = 0;
-+
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  if (numAvail < 2)
-+  {
-+    *backRes = (UInt32)(-1);
-+    return 1;
-+  }
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  repMaxIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 lenTest;
-+    const Byte *data2;
-+    reps[i] = p->reps[i];
-+    data2 = data - (reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+    {
-+      repLens[i] = 0;
-+      continue;
-+    }
-+    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+    repLens[i] = lenTest;
-+    if (lenTest > repLens[repMaxIndex])
-+      repMaxIndex = i;
-+  }
-+  if (repLens[repMaxIndex] >= p->numFastBytes)
-+  {
-+    UInt32 lenRes;
-+    *backRes = repMaxIndex;
-+    lenRes = repLens[repMaxIndex];
-+    MovePos(p, lenRes - 1);
-+    return lenRes;
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+  curByte = *data;
-+  matchByte = *(data - (reps[0] + 1));
-+
-+  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
-+  {
-+    *backRes = (UInt32)-1;
-+    return 1;
-+  }
-+
-+  p->opt[0].state = (CState)p->state;
-+
-+  posState = (position & p->pbMask);
-+
-+  {
-+    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
-+        (!IsCharState(p->state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+  }
-+
-+  MakeAsChar(&p->opt[1]);
-+
-+  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
-+  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
-+
-+  if (matchByte == curByte)
-+  {
-+    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
-+    if (shortRepPrice < p->opt[1].price)
-+    {
-+      p->opt[1].price = shortRepPrice;
-+      MakeAsShortRep(&p->opt[1]);
-+    }
-+  }
-+  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
-+
-+  if (lenEnd < 2)
-+  {
-+    *backRes = p->opt[1].backPrev;
-+    return 1;
-+  }
-+
-+  p->opt[1].posPrev = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+    p->opt[0].backs[i] = reps[i];
-+
-+  len = lenEnd;
-+  do
-+    p->opt[len--].price = kInfinityPrice;
-+  while (len >= 2);
-+
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 repLen = repLens[i];
-+    UInt32 price;
-+    if (repLen < 2)
-+      continue;
-+    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
-+    do
-+    {
-+      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
-+      COptimal *opt = &p->opt[repLen];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = i;
-+        opt->prev1IsChar = False;
-+      }
-+    }
-+    while (--repLen >= 2);
-+  }
-+
-+  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
-+
-+  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
-+  if (len <= mainLen)
-+  {
-+    UInt32 offs = 0;
-+    while (len > matches[offs])
-+      offs += 2;
-+    for (; ; len++)
-+    {
-+      COptimal *opt;
-+      UInt32 distance = matches[offs + 1];
-+
-+      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
-+      UInt32 lenToPosState = GetLenToPosState(len);
-+      if (distance < kNumFullDistances)
-+        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
-+      else
-+      {
-+        UInt32 slot;
-+        GetPosSlot2(distance, slot);
-+        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
-+      }
-+      opt = &p->opt[len];
-+      if (curAndLenPrice < opt->price)
-+      {
-+        opt->price = curAndLenPrice;
-+        opt->posPrev = 0;
-+        opt->backPrev = distance + LZMA_NUM_REPS;
-+        opt->prev1IsChar = False;
-+      }
-+      if (len == matches[offs])
-+      {
-+        offs += 2;
-+        if (offs == numPairs)
-+          break;
-+      }
-+    }
-+  }
-+
-+  cur = 0;
-+
-+    #ifdef SHOW_STAT2
-+    if (position >= 0)
-+    {
-+      unsigned i;
-+      printf("\n pos = %4X", position);
-+      for (i = cur; i <= lenEnd; i++)
-+      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
-+    }
-+    #endif
-+
-+  for (;;)
-+  {
-+    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
-+    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
-+    Bool nextIsChar;
-+    Byte curByte, matchByte;
-+    const Byte *data;
-+    COptimal *curOpt;
-+    COptimal *nextOpt;
-+
-+    cur++;
-+    if (cur == lenEnd)
-+      return Backward(p, backRes, cur);
-+
-+    newLen = ReadMatchDistances(p, &numPairs);
-+    if (newLen >= p->numFastBytes)
-+    {
-+      p->numPairs = numPairs;
-+      p->longestMatchLength = newLen;
-+      return Backward(p, backRes, cur);
-+    }
-+    position++;
-+    curOpt = &p->opt[cur];
-+    posPrev = curOpt->posPrev;
-+    if (curOpt->prev1IsChar)
-+    {
-+      posPrev--;
-+      if (curOpt->prev2)
-+      {
-+        state = p->opt[curOpt->posPrev2].state;
-+        if (curOpt->backPrev2 < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      else
-+        state = p->opt[posPrev].state;
-+      state = kLiteralNextStates[state];
-+    }
-+    else
-+      state = p->opt[posPrev].state;
-+    if (posPrev == cur - 1)
-+    {
-+      if (IsShortRep(curOpt))
-+        state = kShortRepNextStates[state];
-+      else
-+        state = kLiteralNextStates[state];
-+    }
-+    else
-+    {
-+      UInt32 pos;
-+      const COptimal *prevOpt;
-+      if (curOpt->prev1IsChar && curOpt->prev2)
-+      {
-+        posPrev = curOpt->posPrev2;
-+        pos = curOpt->backPrev2;
-+        state = kRepNextStates[state];
-+      }
-+      else
-+      {
-+        pos = curOpt->backPrev;
-+        if (pos < LZMA_NUM_REPS)
-+          state = kRepNextStates[state];
-+        else
-+          state = kMatchNextStates[state];
-+      }
-+      prevOpt = &p->opt[posPrev];
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        UInt32 i;
-+        reps[0] = prevOpt->backs[pos];
-+        for (i = 1; i <= pos; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+        for (; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i];
-+      }
-+      else
-+      {
-+        UInt32 i;
-+        reps[0] = (pos - LZMA_NUM_REPS);
-+        for (i = 1; i < LZMA_NUM_REPS; i++)
-+          reps[i] = prevOpt->backs[i - 1];
-+      }
-+    }
-+    curOpt->state = (CState)state;
-+
-+    curOpt->backs[0] = reps[0];
-+    curOpt->backs[1] = reps[1];
-+    curOpt->backs[2] = reps[2];
-+    curOpt->backs[3] = reps[3];
-+
-+    curPrice = curOpt->price;
-+    nextIsChar = False;
-+    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+    curByte = *data;
-+    matchByte = *(data - (reps[0] + 1));
-+
-+    posState = (position & p->pbMask);
-+
-+    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
-+    {
-+      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+      curAnd1Price +=
-+        (!IsCharState(state) ?
-+          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+    }
-+
-+    nextOpt = &p->opt[cur + 1];
-+
-+    if (curAnd1Price < nextOpt->price)
-+    {
-+      nextOpt->price = curAnd1Price;
-+      nextOpt->posPrev = cur;
-+      MakeAsChar(nextOpt);
-+      nextIsChar = True;
-+    }
-+
-+    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
-+    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
-+
-+    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
-+    {
-+      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
-+      if (shortRepPrice <= nextOpt->price)
-+      {
-+        nextOpt->price = shortRepPrice;
-+        nextOpt->posPrev = cur;
-+        MakeAsShortRep(nextOpt);
-+        nextIsChar = True;
-+      }
-+    }
-+    numAvailFull = p->numAvail;
-+    {
-+      UInt32 temp = kNumOpts - 1 - cur;
-+      if (temp < numAvailFull)
-+        numAvailFull = temp;
-+    }
-+
-+    if (numAvailFull < 2)
-+      continue;
-+    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
-+
-+    if (!nextIsChar && matchByte != curByte) /* speed optimization */
-+    {
-+      /* try Literal + rep0 */
-+      UInt32 temp;
-+      UInt32 lenTest2;
-+      const Byte *data2 = data - (reps[0] + 1);
-+      UInt32 limit = p->numFastBytes + 1;
-+      if (limit > numAvailFull)
-+        limit = numAvailFull;
-+
-+      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
-+      lenTest2 = temp - 1;
-+      if (lenTest2 >= 2)
-+      {
-+        UInt32 state2 = kLiteralNextStates[state];
-+        UInt32 posStateNext = (position + 1) & p->pbMask;
-+        UInt32 nextRepMatchPrice = curAnd1Price +
-+            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+            GET_PRICE_1(p->isRep[state2]);
-+        /* for (; lenTest2 >= 2; lenTest2--) */
-+        {
-+          UInt32 curAndLenPrice;
-+          COptimal *opt;
-+          UInt32 offset = cur + 1 + lenTest2;
-+          while (lenEnd < offset)
-+            p->opt[++lenEnd].price = kInfinityPrice;
-+          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+          opt = &p->opt[offset];
-+          if (curAndLenPrice < opt->price)
-+          {
-+            opt->price = curAndLenPrice;
-+            opt->posPrev = cur + 1;
-+            opt->backPrev = 0;
-+            opt->prev1IsChar = True;
-+            opt->prev2 = False;
-+          }
-+        }
-+      }
-+    }
-+
-+    startLen = 2; /* speed optimization */
-+    {
-+    UInt32 repIndex;
-+    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
-+    {
-+      UInt32 lenTest;
-+      UInt32 lenTestTemp;
-+      UInt32 price;
-+      const Byte *data2 = data - (reps[repIndex] + 1);
-+      if (data[0] != data2[0] || data[1] != data2[1])
-+        continue;
-+      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+      while (lenEnd < cur + lenTest)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+      lenTestTemp = lenTest;
-+      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
-+      do
-+      {
-+        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
-+        COptimal *opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = repIndex;
-+          opt->prev1IsChar = False;
-+        }
-+      }
-+      while (--lenTest >= 2);
-+      lenTest = lenTestTemp;
-+
-+      if (repIndex == 0)
-+        startLen = lenTest + 1;
-+
-+      /* if (_maxMode) */
-+        {
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kRepNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice =
-+                price + p->repLenEnc.prices[posState][lenTest - 2] +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (position + lenTest + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = repIndex;
-+              }
-+            }
-+          }
-+        }
-+    }
-+    }
-+    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
-+    if (newLen > numAvail)
-+    {
-+      newLen = numAvail;
-+      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
-+      matches[numPairs] = newLen;
-+      numPairs += 2;
-+    }
-+    if (newLen >= startLen)
-+    {
-+      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
-+      UInt32 offs, curBack, posSlot;
-+      UInt32 lenTest;
-+      while (lenEnd < cur + newLen)
-+        p->opt[++lenEnd].price = kInfinityPrice;
-+
-+      offs = 0;
-+      while (startLen > matches[offs])
-+        offs += 2;
-+      curBack = matches[offs + 1];
-+      GetPosSlot2(curBack, posSlot);
-+      for (lenTest = /*2*/ startLen; ; lenTest++)
-+      {
-+        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
-+        UInt32 lenToPosState = GetLenToPosState(lenTest);
-+        COptimal *opt;
-+        if (curBack < kNumFullDistances)
-+          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
-+        else
-+          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
-+
-+        opt = &p->opt[cur + lenTest];
-+        if (curAndLenPrice < opt->price)
-+        {
-+          opt->price = curAndLenPrice;
-+          opt->posPrev = cur;
-+          opt->backPrev = curBack + LZMA_NUM_REPS;
-+          opt->prev1IsChar = False;
-+        }
-+
-+        if (/*_maxMode && */lenTest == matches[offs])
-+        {
-+          /* Try Match + Literal + Rep0 */
-+          const Byte *data2 = data - (curBack + 1);
-+          UInt32 lenTest2 = lenTest + 1;
-+          UInt32 limit = lenTest2 + p->numFastBytes;
-+          UInt32 nextRepMatchPrice;
-+          if (limit > numAvailFull)
-+            limit = numAvailFull;
-+          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+          lenTest2 -= lenTest + 1;
-+          if (lenTest2 >= 2)
-+          {
-+            UInt32 state2 = kMatchNextStates[state];
-+            UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+            UInt32 curAndLenCharPrice = curAndLenPrice +
-+                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+                    data[lenTest], data2[lenTest], p->ProbPrices);
-+            state2 = kLiteralNextStates[state2];
-+            posStateNext = (posStateNext + 1) & p->pbMask;
-+            nextRepMatchPrice = curAndLenCharPrice +
-+                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+                GET_PRICE_1(p->isRep[state2]);
-+
-+            /* for (; lenTest2 >= 2; lenTest2--) */
-+            {
-+              UInt32 offset = cur + lenTest + 1 + lenTest2;
-+              UInt32 curAndLenPrice;
-+              COptimal *opt;
-+              while (lenEnd < offset)
-+                p->opt[++lenEnd].price = kInfinityPrice;
-+              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+              opt = &p->opt[offset];
-+              if (curAndLenPrice < opt->price)
-+              {
-+                opt->price = curAndLenPrice;
-+                opt->posPrev = cur + lenTest + 1;
-+                opt->backPrev = 0;
-+                opt->prev1IsChar = True;
-+                opt->prev2 = True;
-+                opt->posPrev2 = cur;
-+                opt->backPrev2 = curBack + LZMA_NUM_REPS;
-+              }
-+            }
-+          }
-+          offs += 2;
-+          if (offs == numPairs)
-+            break;
-+          curBack = matches[offs + 1];
-+          if (curBack >= kNumFullDistances)
-+            GetPosSlot2(curBack, posSlot);
-+        }
-+      }
-+    }
-+  }
-+}
-+
-+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
-+
-+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
-+{
-+  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
-+  const Byte *data;
-+  const UInt32 *matches;
-+
-+  if (p->additionalOffset == 0)
-+    mainLen = ReadMatchDistances(p, &numPairs);
-+  else
-+  {
-+    mainLen = p->longestMatchLength;
-+    numPairs = p->numPairs;
-+  }
-+
-+  numAvail = p->numAvail;
-+  *backRes = (UInt32)-1;
-+  if (numAvail < 2)
-+    return 1;
-+  if (numAvail > LZMA_MATCH_LEN_MAX)
-+    numAvail = LZMA_MATCH_LEN_MAX;
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+
-+  repLen = repIndex = 0;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
-+    if (len >= p->numFastBytes)
-+    {
-+      *backRes = i;
-+      MovePos(p, len - 1);
-+      return len;
-+    }
-+    if (len > repLen)
-+    {
-+      repIndex = i;
-+      repLen = len;
-+    }
-+  }
-+
-+  matches = p->matches;
-+  if (mainLen >= p->numFastBytes)
-+  {
-+    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+    MovePos(p, mainLen - 1);
-+    return mainLen;
-+  }
-+
-+  mainDist = 0; /* for GCC */
-+  if (mainLen >= 2)
-+  {
-+    mainDist = matches[numPairs - 1];
-+    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
-+    {
-+      if (!ChangePair(matches[numPairs - 3], mainDist))
-+        break;
-+      numPairs -= 2;
-+      mainLen = matches[numPairs - 2];
-+      mainDist = matches[numPairs - 1];
-+    }
-+    if (mainLen == 2 && mainDist >= 0x80)
-+      mainLen = 1;
-+  }
-+
-+  if (repLen >= 2 && (
-+        (repLen + 1 >= mainLen) ||
-+        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
-+        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
-+  {
-+    *backRes = repIndex;
-+    MovePos(p, repLen - 1);
-+    return repLen;
-+  }
-+
-+  if (mainLen < 2 || numAvail <= 2)
-+    return 1;
-+
-+  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
-+  if (p->longestMatchLength >= 2)
-+  {
-+    UInt32 newDistance = matches[p->numPairs - 1];
-+    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
-+        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
-+        (p->longestMatchLength > mainLen + 1) ||
-+        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
-+      return 1;
-+  }
-+
-+  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+  for (i = 0; i < LZMA_NUM_REPS; i++)
-+  {
-+    UInt32 len, limit;
-+    const Byte *data2 = data - (p->reps[i] + 1);
-+    if (data[0] != data2[0] || data[1] != data2[1])
-+      continue;
-+    limit = mainLen - 1;
-+    for (len = 2; len < limit && data[len] == data2[len]; len++);
-+    if (len >= limit)
-+      return 1;
-+  }
-+  *backRes = mainDist + LZMA_NUM_REPS;
-+  MovePos(p, mainLen - 2);
-+  return mainLen;
-+}
-+
-+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
-+{
-+  UInt32 len;
-+  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+  p->state = kMatchNextStates[p->state];
-+  len = LZMA_MATCH_LEN_MIN;
-+  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
-+  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
-+  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
-+}
-+
-+static SRes CheckErrors(CLzmaEnc *p)
-+{
-+  if (p->result != SZ_OK)
-+    return p->result;
-+  if (p->rc.res != SZ_OK)
-+    p->result = SZ_ERROR_WRITE;
-+  if (p->matchFinderBase.result != SZ_OK)
-+    p->result = SZ_ERROR_READ;
-+  if (p->result != SZ_OK)
-+    p->finished = True;
-+  return p->result;
-+}
-+
-+static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
-+{
-+  /* ReleaseMFStream(); */
-+  p->finished = True;
-+  if (p->writeEndMark)
-+    WriteEndMarker(p, nowPos & p->pbMask);
-+  RangeEnc_FlushData(&p->rc);
-+  RangeEnc_FlushStream(&p->rc);
-+  return CheckErrors(p);
-+}
-+
-+static void FillAlignPrices(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  for (i = 0; i < kAlignTableSize; i++)
-+    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
-+  p->alignPriceCount = 0;
-+}
-+
-+static void FillDistancesPrices(CLzmaEnc *p)
-+{
-+  UInt32 tempPrices[kNumFullDistances];
-+  UInt32 i, lenToPosState;
-+  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
-+  {
-+    UInt32 posSlot = GetPosSlot1(i);
-+    UInt32 footerBits = ((posSlot >> 1) - 1);
-+    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
-+  }
-+
-+  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
-+  {
-+    UInt32 posSlot;
-+    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
-+    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
-+    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
-+    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
-+      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
-+
-+    {
-+      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
-+      UInt32 i;
-+      for (i = 0; i < kStartPosModelIndex; i++)
-+        distancesPrices[i] = posSlotPrices[i];
-+      for (; i < kNumFullDistances; i++)
-+        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
-+    }
-+  }
-+  p->matchPriceCount = 0;
-+}
-+
-+void LzmaEnc_Construct(CLzmaEnc *p)
-+{
-+  RangeEnc_Construct(&p->rc);
-+  MatchFinder_Construct(&p->matchFinderBase);
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Construct(&p->matchFinderMt);
-+  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
-+  #endif
-+
-+  {
-+    CLzmaEncProps props;
-+    LzmaEncProps_Init(&props);
-+    LzmaEnc_SetProps(p, &props);
-+  }
-+
-+  #ifndef LZMA_LOG_BSR
-+  LzmaEnc_FastPosInit(p->g_FastPos);
-+  #endif
-+
-+  LzmaEnc_InitPriceTables(p->ProbPrices);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
-+{
-+  void *p;
-+  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
-+  if (p != 0)
-+    LzmaEnc_Construct((CLzmaEnc *)p);
-+  return p;
-+}
-+
-+void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+{
-+  alloc->Free(alloc, p->litProbs);
-+  alloc->Free(alloc, p->saveState.litProbs);
-+  p->litProbs = 0;
-+  p->saveState.litProbs = 0;
-+}
-+
-+void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  #ifndef _7ZIP_ST
-+  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-+  #endif
-+  MatchFinder_Free(&p->matchFinderBase, allocBig);
-+  LzmaEnc_FreeLits(p, alloc);
-+  RangeEnc_Free(&p->rc, alloc);
-+}
-+
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
-+  alloc->Free(alloc, p);
-+}
-+
-+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
-+{
-+  UInt32 nowPos32, startPos32;
-+  if (p->needInit)
-+  {
-+    p->matchFinder.Init(p->matchFinderObj);
-+    p->needInit = 0;
-+  }
-+
-+  if (p->finished)
-+    return p->result;
-+  RINOK(CheckErrors(p));
-+
-+  nowPos32 = (UInt32)p->nowPos64;
-+  startPos32 = nowPos32;
-+
-+  if (p->nowPos64 == 0)
-+  {
-+    UInt32 numPairs;
-+    Byte curByte;
-+    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+      return Flush(p, nowPos32);
-+    ReadMatchDistances(p, &numPairs);
-+    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
-+    p->state = kLiteralNextStates[p->state];
-+    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
-+    LitEnc_Encode(&p->rc, p->litProbs, curByte);
-+    p->additionalOffset--;
-+    nowPos32++;
-+  }
-+
-+  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
-+  for (;;)
-+  {
-+    UInt32 pos, len, posState;
-+
-+    if (p->fastMode)
-+      len = GetOptimumFast(p, &pos);
-+    else
-+      len = GetOptimum(p, nowPos32, &pos);
-+
-+    #ifdef SHOW_STAT2
-+    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
-+    #endif
-+
-+    posState = nowPos32 & p->pbMask;
-+    if (len == 1 && pos == (UInt32)-1)
-+    {
-+      Byte curByte;
-+      CLzmaProb *probs;
-+      const Byte *data;
-+
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
-+      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+      curByte = *data;
-+      probs = LIT_PROBS(nowPos32, *(data - 1));
-+      if (IsCharState(p->state))
-+        LitEnc_Encode(&p->rc, probs, curByte);
-+      else
-+        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
-+      p->state = kLiteralNextStates[p->state];
-+    }
-+    else
-+    {
-+      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+      if (pos < LZMA_NUM_REPS)
-+      {
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
-+        if (pos == 0)
-+        {
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
-+          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
-+        }
-+        else
-+        {
-+          UInt32 distance = p->reps[pos];
-+          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
-+          if (pos == 1)
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
-+          else
-+          {
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
-+            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
-+            if (pos == 3)
-+              p->reps[3] = p->reps[2];
-+            p->reps[2] = p->reps[1];
-+          }
-+          p->reps[1] = p->reps[0];
-+          p->reps[0] = distance;
-+        }
-+        if (len == 1)
-+          p->state = kShortRepNextStates[p->state];
-+        else
-+        {
-+          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+          p->state = kRepNextStates[p->state];
-+        }
-+      }
-+      else
-+      {
-+        UInt32 posSlot;
-+        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+        p->state = kMatchNextStates[p->state];
-+        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+        pos -= LZMA_NUM_REPS;
-+        GetPosSlot(pos, posSlot);
-+        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
-+
-+        if (posSlot >= kStartPosModelIndex)
-+        {
-+          UInt32 footerBits = ((posSlot >> 1) - 1);
-+          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+          UInt32 posReduced = pos - base;
-+
-+          if (posSlot < kEndPosModelIndex)
-+            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
-+          else
-+          {
-+            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
-+            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
-+            p->alignPriceCount++;
-+          }
-+        }
-+        p->reps[3] = p->reps[2];
-+        p->reps[2] = p->reps[1];
-+        p->reps[1] = p->reps[0];
-+        p->reps[0] = pos;
-+        p->matchPriceCount++;
-+      }
-+    }
-+    p->additionalOffset -= len;
-+    nowPos32 += len;
-+    if (p->additionalOffset == 0)
-+    {
-+      UInt32 processed;
-+      if (!p->fastMode)
-+      {
-+        if (p->matchPriceCount >= (1 << 7))
-+          FillDistancesPrices(p);
-+        if (p->alignPriceCount >= kAlignTableSize)
-+          FillAlignPrices(p);
-+      }
-+      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+        break;
-+      processed = nowPos32 - startPos32;
-+      if (useLimits)
-+      {
-+        if (processed + kNumOpts + 300 >= maxUnpackSize ||
-+            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
-+          break;
-+      }
-+      else if (processed >= (1 << 15))
-+      {
-+        p->nowPos64 += nowPos32 - startPos32;
-+        return CheckErrors(p);
-+      }
-+    }
-+  }
-+  p->nowPos64 += nowPos32 - startPos32;
-+  return Flush(p, nowPos32);
-+}
-+
-+#define kBigHashDicLimit ((UInt32)1 << 24)
-+
-+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 beforeSize = kNumOpts;
-+  Bool btMode;
-+  if (!RangeEnc_Alloc(&p->rc, alloc))
-+    return SZ_ERROR_MEM;
-+  btMode = (p->matchFinderBase.btMode != 0);
-+  #ifndef _7ZIP_ST
-+  p->mtMode = (p->multiThread && !p->fastMode && btMode);
-+  #endif
-+
-+  {
-+    unsigned lclp = p->lc + p->lp;
-+    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
-+    {
-+      LzmaEnc_FreeLits(p, alloc);
-+      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+      if (p->litProbs == 0 || p->saveState.litProbs == 0)
-+      {
-+        LzmaEnc_FreeLits(p, alloc);
-+        return SZ_ERROR_MEM;
-+      }
-+      p->lclp = lclp;
-+    }
-+  }
-+
-+  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
-+
-+  if (beforeSize + p->dictSize < keepWindowSize)
-+    beforeSize = keepWindowSize - p->dictSize;
-+
-+  #ifndef _7ZIP_ST
-+  if (p->mtMode)
-+  {
-+    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
-+    p->matchFinderObj = &p->matchFinderMt;
-+    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
-+  }
-+  else
-+  #endif
-+  {
-+    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
-+      return SZ_ERROR_MEM;
-+    p->matchFinderObj = &p->matchFinderBase;
-+    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
-+  }
-+  return SZ_OK;
-+}
-+
-+void LzmaEnc_Init(CLzmaEnc *p)
-+{
-+  UInt32 i;
-+  p->state = 0;
-+  for (i = 0 ; i < LZMA_NUM_REPS; i++)
-+    p->reps[i] = 0;
-+
-+  RangeEnc_Init(&p->rc);
-+
-+
-+  for (i = 0; i < kNumStates; i++)
-+  {
-+    UInt32 j;
-+    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
-+    {
-+      p->isMatch[i][j] = kProbInitValue;
-+      p->isRep0Long[i][j] = kProbInitValue;
-+    }
-+    p->isRep[i] = kProbInitValue;
-+    p->isRepG0[i] = kProbInitValue;
-+    p->isRepG1[i] = kProbInitValue;
-+    p->isRepG2[i] = kProbInitValue;
-+  }
-+
-+  {
-+    UInt32 num = 0x300 << (p->lp + p->lc);
-+    for (i = 0; i < num; i++)
-+      p->litProbs[i] = kProbInitValue;
-+  }
-+
-+  {
-+    for (i = 0; i < kNumLenToPosStates; i++)
-+    {
-+      CLzmaProb *probs = p->posSlotEncoder[i];
-+      UInt32 j;
-+      for (j = 0; j < (1 << kNumPosSlotBits); j++)
-+        probs[j] = kProbInitValue;
-+    }
-+  }
-+  {
-+    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
-+      p->posEncoders[i] = kProbInitValue;
-+  }
-+
-+  LenEnc_Init(&p->lenEnc.p);
-+  LenEnc_Init(&p->repLenEnc.p);
-+
-+  for (i = 0; i < (1 << kNumAlignBits); i++)
-+    p->posAlignEncoder[i] = kProbInitValue;
-+
-+  p->optimumEndIndex = 0;
-+  p->optimumCurrentIndex = 0;
-+  p->additionalOffset = 0;
-+
-+  p->pbMask = (1 << p->pb) - 1;
-+  p->lpMask = (1 << p->lp) - 1;
-+}
-+
-+void LzmaEnc_InitPrices(CLzmaEnc *p)
-+{
-+  if (!p->fastMode)
-+  {
-+    FillDistancesPrices(p);
-+    FillAlignPrices(p);
-+  }
-+
-+  p->lenEnc.tableSize =
-+  p->repLenEnc.tableSize =
-+      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
-+  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
-+  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
-+}
-+
-+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  UInt32 i;
-+  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
-+    if (p->dictSize <= ((UInt32)1 << i))
-+      break;
-+  p->distTableSize = i * 2;
-+
-+  p->finished = False;
-+  p->result = SZ_OK;
-+  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
-+  LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  p->nowPos64 = 0;
-+  return SZ_OK;
-+}
-+
-+static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  p->rc.outStream = outStream;
-+  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
-+}
-+
-+SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
-+    ISeqInStream *inStream, UInt32 keepWindowSize,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  p->matchFinderBase.stream = inStream;
-+  p->needInit = 1;
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
-+{
-+  p->matchFinderBase.directInput = 1;
-+  p->matchFinderBase.bufferBase = (Byte *)src;
-+  p->matchFinderBase.directInputRem = srcLen;
-+}
-+
-+SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+  p->needInit = 1;
-+
-+  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+void LzmaEnc_Finish(CLzmaEncHandle pp)
-+{
-+  #ifndef _7ZIP_ST
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  if (p->mtMode)
-+    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
-+  #else
-+  pp = pp;
-+  #endif
-+}
-+
-+typedef struct
-+{
-+  ISeqOutStream funcTable;
-+  Byte *data;
-+  SizeT rem;
-+  Bool overflow;
-+} CSeqOutStreamBuf;
-+
-+static size_t MyWrite(void *pp, const void *data, size_t size)
-+{
-+  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
-+  if (p->rem < size)
-+  {
-+    size = p->rem;
-+    p->overflow = True;
-+  }
-+  memcpy(p->data, data, size);
-+  p->rem -= size;
-+  p->data += size;
-+  return size;
-+}
-+
-+
-+UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+}
-+
-+const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
-+{
-+  const CLzmaEnc *p = (CLzmaEnc *)pp;
-+  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+}
-+
-+SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
-+    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  UInt64 nowPos64;
-+  SRes res;
-+  CSeqOutStreamBuf outStream;
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = False;
-+  p->finished = False;
-+  p->result = SZ_OK;
-+
-+  if (reInit)
-+    LzmaEnc_Init(p);
-+  LzmaEnc_InitPrices(p);
-+  nowPos64 = p->nowPos64;
-+  RangeEnc_Init(&p->rc);
-+  p->rc.outStream = &outStream.funcTable;
-+
-+  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
-+
-+  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+
-+  return res;
-+}
-+
-+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
-+{
-+  SRes res = SZ_OK;
-+
-+  #ifndef _7ZIP_ST
-+  Byte allocaDummy[0x300];
-+  int i = 0;
-+  for (i = 0; i < 16; i++)
-+    allocaDummy[i] = (Byte)i;
-+  #endif
-+
-+  for (;;)
-+  {
-+    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
-+    if (res != SZ_OK || p->finished != 0)
-+      break;
-+    if (progress != 0)
-+    {
-+      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
-+      if (res != SZ_OK)
-+      {
-+        res = SZ_ERROR_PROGRESS;
-+        break;
-+      }
-+    }
-+  }
-+  LzmaEnc_Finish(p);
-+  return res;
-+}
-+
-+SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
-+    ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
-+  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
-+}
-+
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+  int i;
-+  UInt32 dictSize = p->dictSize;
-+  if (*size < LZMA_PROPS_SIZE)
-+    return SZ_ERROR_PARAM;
-+  *size = LZMA_PROPS_SIZE;
-+  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
-+
-+  for (i = 11; i <= 30; i++)
-+  {
-+    if (dictSize <= ((UInt32)2 << i))
-+    {
-+      dictSize = (2 << i);
-+      break;
-+    }
-+    if (dictSize <= ((UInt32)3 << i))
-+    {
-+      dictSize = (3 << i);
-+      break;
-+    }
-+  }
-+
-+  for (i = 0; i < 4; i++)
-+    props[1 + i] = (Byte)(dictSize >> (8 * i));
-+  return SZ_OK;
-+}
-+
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  SRes res;
-+  CLzmaEnc *p = (CLzmaEnc *)pp;
-+
-+  CSeqOutStreamBuf outStream;
-+
-+  LzmaEnc_SetInputBuf(p, src, srcLen);
-+
-+  outStream.funcTable.Write = MyWrite;
-+  outStream.data = dest;
-+  outStream.rem = *destLen;
-+  outStream.overflow = False;
-+
-+  p->writeEndMark = writeEndMark;
-+
-+  p->rc.outStream = &outStream.funcTable;
-+  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
-+  if (res == SZ_OK)
-+    res = LzmaEnc_Encode2(p, progress);
-+
-+  *destLen -= outStream.rem;
-+  if (outStream.overflow)
-+    return SZ_ERROR_OUTPUT_EOF;
-+  return res;
-+}
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
-+  SRes res;
-+  if (p == 0)
-+    return SZ_ERROR_MEM;
-+
-+  res = LzmaEnc_SetProps(p, props);
-+  if (res == SZ_OK)
-+  {
-+    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
-+    if (res == SZ_OK)
-+      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
-+          writeEndMark, progress, alloc, allocBig);
-+  }
-+
-+  LzmaEnc_Destroy(p, alloc, allocBig);
-+  return res;
-+}
---- /dev/null
-+++ b/lib/lzma/Makefile
-@@ -0,0 +1,7 @@
-+lzma_compress-objs := LzFind.o LzmaEnc.o
-+lzma_decompress-objs := LzmaDec.o
-+
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
-+
-+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/pending-6.1/532-jffs2_eofdetect.patch b/target/linux/generic/pending-6.1/532-jffs2_eofdetect.patch
deleted file mode 100644
index 744fbd0e2179..000000000000
--- a/target/linux/generic/pending-6.1/532-jffs2_eofdetect.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fs: jffs2: EOF marker
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/jffs2/build.c | 10 ++++++++++
- fs/jffs2/scan.c  | 21 +++++++++++++++++++--
- 2 files changed, 29 insertions(+), 2 deletions(-)
-
---- a/fs/jffs2/build.c
-+++ b/fs/jffs2/build.c
-@@ -117,6 +117,16 @@ static int jffs2_build_filesystem(struct
- 	dbg_fsbuild("scanned flash completely\n");
- 	jffs2_dbg_dump_block_lists_nolock(c);
- 
-+	if (c->flags & (1 << 7)) {
-+		printk("%s(): unlocking the mtd device... ", __func__);
-+		mtd_unlock(c->mtd, 0, c->mtd->size);
-+		printk("done.\n");
-+
-+		printk("%s(): erasing all blocks after the end marker... ", __func__);
-+		jffs2_erase_pending_blocks(c, -1);
-+		printk("done.\n");
-+	}
-+
- 	dbg_fsbuild("pass 1 starting\n");
- 	c->flags |= JFFS2_SB_FLAG_BUILDING;
- 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
---- a/fs/jffs2/scan.c
-+++ b/fs/jffs2/scan.c
-@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in
- 		/* reset summary info for next eraseblock scan */
- 		jffs2_sum_reset_collected(s);
- 
--		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
--						buf_size, s);
-+		if (c->flags & (1 << 7)) {
-+			if (mtd_block_isbad(c->mtd, jeb->offset))
-+				ret = BLK_STATE_BADBLOCK;
-+			else
-+				ret = BLK_STATE_ALLFF;
-+		} else
-+			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
-+							buf_size, s);
- 
- 		if (ret < 0)
- 			goto out;
-@@ -567,6 +573,17 @@ full_scan:
- 			return err;
- 	}
- 
-+	if ((buf[0] == 0xde) &&
-+		(buf[1] == 0xad) &&
-+		(buf[2] == 0xc0) &&
-+		(buf[3] == 0xde)) {
-+		/* end of filesystem. erase everything after this point */
-+		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
-+		c->flags |= (1 << 7);
-+
-+		return BLK_STATE_ALLFF;
-+	}
-+
- 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
- 	ofs = 0;
- 	max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
diff --git a/target/linux/generic/pending-6.1/600-netfilter_conntrack_flush.patch b/target/linux/generic/pending-6.1/600-netfilter_conntrack_flush.patch
deleted file mode 100644
index d7548c141997..000000000000
--- a/target/linux/generic/pending-6.1/600-netfilter_conntrack_flush.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: add support for flushing conntrack via /proc
-
-lede-commit 8193bbe59a74d34d6a26d4a8cb857b1952905314
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_standalone.c | 59 ++++++++++++++++++++++++++++++++-
- 1 file changed, 58 insertions(+), 1 deletion(-)
-
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -9,6 +9,7 @@
- #include <linux/percpu.h>
- #include <linux/netdevice.h>
- #include <linux/security.h>
-+#include <linux/inet.h>
- #include <net/net_namespace.h>
- #ifdef CONFIG_SYSCTL
- #include <linux/sysctl.h>
-@@ -465,6 +466,58 @@ static int ct_cpu_seq_show(struct seq_fi
- 	return 0;
- }
- 
-+struct kill_request {
-+	u16 family;
-+	union nf_inet_addr addr;
-+};
-+
-+static int kill_matching(struct nf_conn *i, void *data)
-+{
-+	struct kill_request *kr = data;
-+	struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+	struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+	if (!kr->family)
-+		return 1;
-+
-+	if (t1->src.l3num != kr->family)
-+		return 0;
-+
-+	return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->src.u3) ||
-+	        nf_inet_addr_cmp(&kr->addr, &t2->dst.u3));
-+}
-+
-+static int ct_file_write(struct file *file, char *buf, size_t count)
-+{
-+	struct seq_file *seq = file->private_data;
-+	struct nf_ct_iter_data iter_data;
-+	struct kill_request kr = { };
-+
-+	if (count == 0)
-+		return 0;
-+
-+	if (count >= INET6_ADDRSTRLEN)
-+		count = INET6_ADDRSTRLEN - 1;
-+
-+	if (strnchr(buf, count, ':')) {
-+		kr.family = AF_INET6;
-+		if (!in6_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	} else if (strnchr(buf, count, '.')) {
-+		kr.family = AF_INET;
-+		if (!in4_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+			return -EINVAL;
-+	}
-+
-+	iter_data.net = seq_file_net(seq);
-+	iter_data.data = &kr;
-+	nf_ct_iterate_cleanup_net(kill_matching, &iter_data);
-+
-+	return 0;
-+}
-+
- static const struct seq_operations ct_cpu_seq_ops = {
- 	.start	= ct_cpu_seq_start,
- 	.next	= ct_cpu_seq_next,
-@@ -478,8 +531,9 @@ static int nf_conntrack_standalone_init_
- 	kuid_t root_uid;
- 	kgid_t root_gid;
- 
--	pde = proc_create_net("nf_conntrack", 0440, net->proc_net, &ct_seq_ops,
--			sizeof(struct ct_iter_state));
-+	pde = proc_create_net_data_write("nf_conntrack", 0440, net->proc_net,
-+					 &ct_seq_ops, &ct_file_write,
-+					 sizeof(struct ct_iter_state), NULL);
- 	if (!pde)
- 		goto out_nf_conntrack;
- 
diff --git a/target/linux/generic/pending-6.1/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-6.1/610-netfilter_match_bypass_default_checks.patch
deleted file mode 100644
index 0ab89564eeb1..000000000000
--- a/target/linux/generic/pending-6.1/610-netfilter_match_bypass_default_checks.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/netfilter_ipv4/ip_tables.h |  1 +
- net/ipv4/netfilter/ip_tables.c                | 37 +++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
---- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
-+++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
-@@ -89,6 +89,7 @@ struct ipt_ip {
- #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
- #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
- #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
-+#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
- 
- /* Values for "inv" field in struct ipt_ip. */
- #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -50,6 +50,9 @@ ip_packet_match(const struct iphdr *ip,
- {
- 	unsigned long ret;
- 
-+	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
-+		return true;
-+
- 	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
- 	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-@@ -80,6 +83,29 @@ ip_packet_match(const struct iphdr *ip,
- 	return true;
- }
- 
-+static void
-+ip_checkdefault(struct ipt_ip *ip)
-+{
-+	static const char iface_mask[IFNAMSIZ] = {};
-+
-+	if (ip->invflags || ip->flags & IPT_F_FRAG)
-+		return;
-+
-+	if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
-+		return;
-+
-+	if (ip->smsk.s_addr || ip->dmsk.s_addr)
-+		return;
-+
-+	if (ip->proto)
-+		return;
-+
-+	ip->flags |= IPT_F_NO_DEF_MATCH;
-+}
-+
- static bool
- ip_checkentry(const struct ipt_ip *ip)
- {
-@@ -525,6 +551,8 @@ find_check_entry(struct ipt_entry *e, st
- 	struct xt_mtchk_param mtpar;
- 	struct xt_entry_match *ematch;
- 
-+	ip_checkdefault(&e->ip);
-+
- 	if (!xt_percpu_counter_alloc(alloc_state, &e->counters))
- 		return -ENOMEM;
- 
-@@ -819,6 +847,7 @@ copy_entries_to_user(unsigned int total_
- 	const struct xt_table_info *private = table->private;
- 	int ret = 0;
- 	const void *loc_cpu_entry;
-+	u8 flags;
- 
- 	counters = alloc_counters(table);
- 	if (IS_ERR(counters))
-@@ -846,6 +875,14 @@ copy_entries_to_user(unsigned int total_
- 			goto free_counters;
- 		}
- 
-+		flags = e->ip.flags & IPT_F_MASK;
-+		if (copy_to_user(userptr + off
-+				 + offsetof(struct ipt_entry, ip.flags),
-+				 &flags, sizeof(flags)) != 0) {
-+			ret = -EFAULT;
-+			goto free_counters;
-+		}
-+
- 		for (i = sizeof(struct ipt_entry);
- 		     i < e->target_offset;
- 		     i += m->u.match_size) {
-@@ -1227,12 +1264,15 @@ compat_copy_entry_to_user(struct ipt_ent
- 	compat_uint_t origsize;
- 	const struct xt_entry_match *ematch;
- 	int ret = 0;
-+	u8 flags = e->ip.flags & IPT_F_MASK;
- 
- 	origsize = *size;
- 	ce = *dstptr;
- 	if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 ||
- 	    copy_to_user(&ce->counters, &counters[i],
--	    sizeof(counters[i])) != 0)
-+	    sizeof(counters[i])) != 0 ||
-+	    copy_to_user(&ce->ip.flags, &flags,
-+	    sizeof(flags)) != 0)
- 		return -EFAULT;
- 
- 	*dstptr += sizeof(struct compat_ipt_entry);
diff --git a/target/linux/generic/pending-6.1/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/pending-6.1/611-netfilter_match_bypass_default_table.patch
deleted file mode 100644
index dd557fd3eaae..000000000000
--- a/target/linux/generic/pending-6.1/611-netfilter_match_bypass_default_table.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: match bypass default table
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 79 +++++++++++++++++++++++++++++++-----------
- 1 file changed, 58 insertions(+), 21 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -246,6 +246,33 @@ struct ipt_entry *ipt_next_entry(const s
- 	return (void *)entry + entry->next_offset;
- }
- 
-+static bool
-+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
-+{
-+	struct xt_entry_target *t;
-+	struct xt_standard_target *st;
-+
-+	if (e->target_offset != sizeof(struct ipt_entry))
-+		return false;
-+
-+	if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
-+		return false;
-+
-+	t = ipt_get_target(e);
-+	if (t->u.kernel.target->target)
-+		return false;
-+
-+	st = (struct xt_standard_target *) t;
-+	if (st->verdict == XT_RETURN)
-+		return false;
-+
-+	if (st->verdict >= 0)
-+		return false;
-+
-+	*verdict = (unsigned)(-st->verdict) - 1;
-+	return true;
-+}
-+
- /* Returns one of the generic firewall policies, like NF_ACCEPT. */
- unsigned int
- ipt_do_table(void *priv,
-@@ -267,27 +294,28 @@ ipt_do_table(void *priv,
- 	unsigned int addend;
- 
- 	/* Initialization */
-+	WARN_ON(!(table->valid_hooks & (1 << hook)));
-+	local_bh_disable();
-+	private = READ_ONCE(table->private); /* Address dependency. */
-+	cpu        = smp_processor_id();
-+	table_base = private->entries;
-+
-+	e = get_entry(table_base, private->hook_entry[hook]);
-+	if (ipt_handle_default_rule(e, &verdict)) {
-+		struct xt_counters *counter;
-+
-+		counter = xt_get_this_cpu_counter(&e->counters);
-+		ADD_COUNTER(*counter, skb->len, 1);
-+		local_bh_enable();
-+		return verdict;
-+	}
-+
- 	stackidx = 0;
- 	ip = ip_hdr(skb);
- 	indev = state->in ? state->in->name : nulldevname;
- 	outdev = state->out ? state->out->name : nulldevname;
--	/* We handle fragments by dealing with the first fragment as
--	 * if it was a normal packet.  All other fragments are treated
--	 * normally, except that they will NEVER match rules that ask
--	 * things we don't know, ie. tcp syn flag or ports).  If the
--	 * rule is also a fragment-specific rule, non-fragments won't
--	 * match it. */
--	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
--	acpar.thoff   = ip_hdrlen(skb);
--	acpar.hotdrop = false;
--	acpar.state   = state;
- 
--	WARN_ON(!(table->valid_hooks & (1 << hook)));
--	local_bh_disable();
- 	addend = xt_write_recseq_begin();
--	private = READ_ONCE(table->private); /* Address dependency. */
--	cpu        = smp_processor_id();
--	table_base = private->entries;
- 	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
- 
- 	/* Switch to alternate jumpstack if we're being invoked via TEE.
-@@ -300,7 +328,16 @@ ipt_do_table(void *priv,
- 	if (static_key_false(&xt_tee_enabled))
- 		jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated);
- 
--	e = get_entry(table_base, private->hook_entry[hook]);
-+	/* We handle fragments by dealing with the first fragment as
-+	 * if it was a normal packet.  All other fragments are treated
-+	 * normally, except that they will NEVER match rules that ask
-+	 * things we don't know, ie. tcp syn flag or ports).  If the
-+	 * rule is also a fragment-specific rule, non-fragments won't
-+	 * match it. */
-+	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
-+	acpar.thoff   = ip_hdrlen(skb);
-+	acpar.hotdrop = false;
-+	acpar.state   = state;
- 
- 	do {
- 		const struct xt_entry_target *t;
diff --git a/target/linux/generic/pending-6.1/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/pending-6.1/612-netfilter_match_reduce_memory_access.patch
deleted file mode 100644
index 79da6778b684..000000000000
--- a/target/linux/generic/pending-6.1/612-netfilter_match_reduce_memory_access.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: reduce match memory access
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -53,9 +53,9 @@ ip_packet_match(const struct iphdr *ip,
- 	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
- 		return true;
- 
--	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
-+	if (NF_INVF(ipinfo, IPT_INV_SRCIP, ipinfo->smsk.s_addr &&
- 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
--	    NF_INVF(ipinfo, IPT_INV_DSTIP,
-+	    NF_INVF(ipinfo, IPT_INV_DSTIP, ipinfo->dmsk.s_addr &&
- 		    (ip->daddr & ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr))
- 		return false;
- 
diff --git a/target/linux/generic/pending-6.1/620-net_sched-codel-do-not-defer-queue-length-update.patch b/target/linux/generic/pending-6.1/620-net_sched-codel-do-not-defer-queue-length-update.patch
deleted file mode 100644
index 4b4825ae3b9a..000000000000
--- a/target/linux/generic/pending-6.1/620-net_sched-codel-do-not-defer-queue-length-update.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Date: Mon, 21 Aug 2017 11:14:14 +0300
-Subject: [PATCH] net_sched/codel: do not defer queue length update
-
-When codel wants to drop last packet in ->dequeue() it cannot call
-qdisc_tree_reduce_backlog() right away - it will notify parent qdisc
-about zero qlen and HTB/HFSC will deactivate class. The same class will
-be deactivated second time by caller of ->dequeue(). Currently codel and
-fq_codel defer update. This triggers warning in HFSC when it's qlen != 0
-but there is no active classes.
-
-This patch update parent queue length immediately: just temporary increase
-qlen around qdisc_tree_reduce_backlog() to prevent first class deactivation
-if we have skb to return.
-
-This might open another problem in HFSC - now operation peek could fail and
-deactivate parent class.
-
-Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Link: https://bugzilla.kernel.org/show_bug.cgi?id=109581
----
-
---- a/net/sched/sch_codel.c
-+++ b/net/sched/sch_codel.c
-@@ -95,11 +95,17 @@ static struct sk_buff *codel_qdisc_deque
- 			    &q->stats, qdisc_pkt_len, codel_get_enqueue_time,
- 			    drop_func, dequeue_func);
- 
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
- 	 */
--	if (q->stats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->stats.drop_count, q->stats.drop_len);
-+	if (q->stats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->stats.drop_count,
-+					  q->stats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
- 		q->stats.drop_count = 0;
- 		q->stats.drop_len = 0;
- 	}
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -304,6 +304,21 @@ begin:
- 			    &flow->cvars, &q->cstats, qdisc_pkt_len,
- 			    codel_get_enqueue_time, drop_func, dequeue_func);
- 
-+	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+	 * parent class, dequeue in parent qdisc will do the same if we
-+	 * return skb. Temporary increment qlen if we have skb.
-+	 */
-+	if (q->cstats.drop_count) {
-+		if (skb)
-+			sch->q.qlen++;
-+		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
-+					  q->cstats.drop_len);
-+		if (skb)
-+			sch->q.qlen--;
-+		q->cstats.drop_count = 0;
-+		q->cstats.drop_len = 0;
-+	}
-+
- 	if (!skb) {
- 		/* force a pass through old_flows to prevent starvation */
- 		if ((head == &q->new_flows) && !list_empty(&q->old_flows))
-@@ -314,15 +329,6 @@ begin:
- 	}
- 	qdisc_bstats_update(sch, skb);
- 	flow->deficit -= qdisc_pkt_len(skb);
--	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
--	 * or HTB crashes. Defer it for next round.
--	 */
--	if (q->cstats.drop_count && sch->q.qlen) {
--		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
--					  q->cstats.drop_len);
--		q->cstats.drop_count = 0;
--		q->cstats.drop_len = 0;
--	}
- 	return skb;
- }
- 
diff --git a/target/linux/generic/pending-6.1/630-packet_socket_type.patch b/target/linux/generic/pending-6.1/630-packet_socket_type.patch
deleted file mode 100644
index 5553fba94b40..000000000000
--- a/target/linux/generic/pending-6.1/630-packet_socket_type.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: add an optimization for dealing with raw sockets
-
-lede-commit: 4898039703d7315f0f3431c860123338ec3be0f6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/if_packet.h |  3 +++
- net/packet/af_packet.c         | 34 +++++++++++++++++++++++++++-------
- net/packet/internal.h          |  1 +
- 3 files changed, 31 insertions(+), 7 deletions(-)
-
---- a/include/uapi/linux/if_packet.h
-+++ b/include/uapi/linux/if_packet.h
-@@ -33,6 +33,8 @@ struct sockaddr_ll {
- #define PACKET_KERNEL		7		/* To kernel space	*/
- /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
- #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
-+#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
-+
- 
- /* Packet socket options */
- 
-@@ -59,6 +61,7 @@ struct sockaddr_ll {
- #define PACKET_ROLLOVER_STATS		21
- #define PACKET_FANOUT_DATA		22
- #define PACKET_IGNORE_OUTGOING		23
-+#define PACKET_RECV_TYPE		24
- 
- #define PACKET_FANOUT_HASH		0
- #define PACKET_FANOUT_LB		1
---- a/net/packet/af_packet.c
-+++ b/net/packet/af_packet.c
-@@ -1927,6 +1927,7 @@ static int packet_rcv_spkt(struct sk_buf
- {
- 	struct sock *sk;
- 	struct sockaddr_pkt *spkt;
-+	struct packet_sock *po;
- 
- 	/*
- 	 *	When we registered the protocol we saved the socket in the data
-@@ -1934,6 +1935,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 */
- 
- 	sk = pt->af_packet_priv;
-+	po = pkt_sk(sk);
- 
- 	/*
- 	 *	Yank back the headers [hope the device set this
-@@ -1946,7 +1948,7 @@ static int packet_rcv_spkt(struct sk_buf
- 	 *	so that this procedure is noop.
- 	 */
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
- 		goto out;
- 
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
-@@ -2192,12 +2194,12 @@ static int packet_rcv(struct sk_buff *sk
- 	unsigned int snaplen, res;
- 	bool is_drop_n_account = false;
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -2324,12 +2326,12 @@ static int tpacket_rcv(struct sk_buff *s
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
- 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
- 
--	if (skb->pkt_type == PACKET_LOOPBACK)
--		goto drop;
--
- 	sk = pt->af_packet_priv;
- 	po = pkt_sk(sk);
- 
-+	if (!(po->pkt_type & (1 << skb->pkt_type)))
-+		goto drop;
-+
- 	if (!net_eq(dev_net(dev), sock_net(sk)))
- 		goto drop;
- 
-@@ -3443,6 +3445,7 @@ static int packet_create(struct net *net
- 	mutex_init(&po->pg_vec_lock);
- 	po->rollover = NULL;
- 	po->prot_hook.func = packet_rcv;
-+	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
- 
- 	if (sock->type == SOCK_PACKET)
- 		po->prot_hook.func = packet_rcv_spkt;
-@@ -4096,6 +4099,16 @@ packet_setsockopt(struct socket *sock, i
- 		WRITE_ONCE(po->xmit, val ? packet_direct_xmit : dev_queue_xmit);
- 		return 0;
- 	}
-+	case PACKET_RECV_TYPE:
-+	{
-+		unsigned int val;
-+		if (optlen != sizeof(val))
-+			return -EINVAL;
-+		if (copy_from_sockptr(&val, optval, sizeof(val)))
-+			return -EFAULT;
-+		po->pkt_type = val & ~BIT(PACKET_LOOPBACK);
-+		return 0;
-+	}
- 	default:
- 		return -ENOPROTOOPT;
- 	}
-@@ -4152,6 +4165,13 @@ static int packet_getsockopt(struct sock
- 	case PACKET_VNET_HDR:
- 		val = po->has_vnet_hdr;
- 		break;
-+	case PACKET_RECV_TYPE:
-+		if (len > sizeof(unsigned int))
-+			len = sizeof(unsigned int);
-+		val = po->pkt_type;
-+
-+		data = &val;
-+		break;
- 	case PACKET_VERSION:
- 		val = po->tp_version;
- 		break;
---- a/net/packet/internal.h
-+++ b/net/packet/internal.h
-@@ -136,6 +136,7 @@ struct packet_sock {
- 	int			(*xmit)(struct sk_buff *skb);
- 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
- 	atomic_t		tp_drops ____cacheline_aligned_in_smp;
-+	unsigned int		pkt_type;
- };
- 
- static inline struct packet_sock *pkt_sk(struct sock *sk)
diff --git a/target/linux/generic/pending-6.1/655-increase_skb_pad.patch b/target/linux/generic/pending-6.1/655-increase_skb_pad.patch
deleted file mode 100644
index 22c479311a49..000000000000
--- a/target/linux/generic/pending-6.1/655-increase_skb_pad.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance
-
-lede-commit: 6f89cffc9add6939d44a6b54cf9a5e77849aa7fd
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/skbuff.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -3038,7 +3038,7 @@ static inline int pskb_network_may_pull(
-  * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
-  */
- #ifndef NET_SKB_PAD
--#define NET_SKB_PAD	max(32, L1_CACHE_BYTES)
-+#define NET_SKB_PAD	max(64, L1_CACHE_BYTES)
- #endif
- 
- int ___pskb_trim(struct sk_buff *skb, unsigned int len);
diff --git a/target/linux/generic/pending-6.1/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-6.1/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
deleted file mode 100644
index a2f88d79e633..000000000000
--- a/target/linux/generic/pending-6.1/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
+++ /dev/null
@@ -1,511 +0,0 @@
-From: Steven Barth <steven@midlink.org>
-Subject: Add support for MAP-E FMRs (mesh mode)
-
-MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication
-between MAP CEs (mesh mode) without the need to forward such data to a
-border relay. This is similar to how 6rd works but for IPv4 over IPv6.
-
-Signed-off-by: Steven Barth <cyrus@openwrt.org>
----
- include/net/ip6_tunnel.h       |  13 ++
- include/uapi/linux/if_tunnel.h |  13 ++
- net/ipv6/ip6_tunnel.c          | 276 +++++++++++++++++++++++++++++++++++++++--
- 3 files changed, 291 insertions(+), 11 deletions(-)
-
---- a/include/net/ip6_tunnel.h
-+++ b/include/net/ip6_tunnel.h
-@@ -18,6 +18,18 @@
- /* determine capability on a per-packet basis */
- #define IP6_TNL_F_CAP_PER_PACKET 0x40000
- 
-+/* IPv6 tunnel FMR */
-+struct __ip6_tnl_fmr {
-+	struct __ip6_tnl_fmr *next; /* next fmr in list */
-+	struct in6_addr ip6_prefix;
-+	struct in_addr ip4_prefix;
-+
-+	__u8 ip6_prefix_len;
-+	__u8 ip4_prefix_len;
-+	__u8 ea_len;
-+	__u8 offset;
-+};
-+
- struct __ip6_tnl_parm {
- 	char name[IFNAMSIZ];	/* name of tunnel device */
- 	int link;		/* ifindex of underlying L2 interface */
-@@ -29,6 +41,7 @@ struct __ip6_tnl_parm {
- 	__u32 flags;		/* tunnel flags */
- 	struct in6_addr laddr;	/* local tunnel end-point address */
- 	struct in6_addr raddr;	/* remote tunnel end-point address */
-+	struct __ip6_tnl_fmr *fmrs;	/* FMRs */
- 
- 	__be16			i_flags;
- 	__be16			o_flags;
---- a/include/uapi/linux/if_tunnel.h
-+++ b/include/uapi/linux/if_tunnel.h
-@@ -77,10 +77,23 @@ enum {
- 	IFLA_IPTUN_ENCAP_DPORT,
- 	IFLA_IPTUN_COLLECT_METADATA,
- 	IFLA_IPTUN_FWMARK,
-+	IFLA_IPTUN_FMRS,
- 	__IFLA_IPTUN_MAX,
- };
- #define IFLA_IPTUN_MAX	(__IFLA_IPTUN_MAX - 1)
- 
-+enum {
-+	IFLA_IPTUN_FMR_UNSPEC,
-+	IFLA_IPTUN_FMR_IP6_PREFIX,
-+	IFLA_IPTUN_FMR_IP4_PREFIX,
-+	IFLA_IPTUN_FMR_IP6_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_IP4_PREFIX_LEN,
-+	IFLA_IPTUN_FMR_EA_LEN,
-+	IFLA_IPTUN_FMR_OFFSET,
-+	__IFLA_IPTUN_FMR_MAX,
-+};
-+#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1)
-+
- enum tunnel_encap_types {
- 	TUNNEL_ENCAP_NONE,
- 	TUNNEL_ENCAP_FOU,
---- a/net/ipv6/ip6_tunnel.c
-+++ b/net/ipv6/ip6_tunnel.c
-@@ -11,6 +11,9 @@
-  *      linux/net/ipv6/sit.c and linux/net/ipv4/ipip.c
-  *
-  *      RFC 2473
-+ *
-+ *      Changes:
-+ *      Steven Barth <cyrus@openwrt.org>:           MAP-E FMR support
-  */
- 
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-@@ -67,9 +70,9 @@ static bool log_ecn_error = true;
- module_param(log_ecn_error, bool, 0644);
- MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN");
- 
--static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2)
-+static u32 HASH(const struct in6_addr *addr)
- {
--	u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2);
-+	u32 hash = ipv6_addr_hash(addr);
- 
- 	return hash_32(hash, IP6_TUNNEL_HASH_SIZE_SHIFT);
- }
-@@ -114,17 +117,33 @@ static struct ip6_tnl *
- ip6_tnl_lookup(struct net *net, int link,
- 	       const struct in6_addr *remote, const struct in6_addr *local)
- {
--	unsigned int hash = HASH(remote, local);
-+	unsigned int hash = HASH(local);
- 	struct ip6_tnl *t, *cand = NULL;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 	struct in6_addr any;
- 
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (!ipv6_addr_equal(local, &t->parms.laddr) ||
--		    !ipv6_addr_equal(remote, &t->parms.raddr) ||
- 		    !(t->dev->flags & IFF_UP))
- 			continue;
- 
-+		if (!ipv6_addr_equal(remote, &t->parms.raddr)) {
-+			struct __ip6_tnl_fmr *fmr;
-+			bool found = false;
-+
-+			for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+				if (!ipv6_prefix_equal(remote, &fmr->ip6_prefix,
-+						       fmr->ip6_prefix_len))
-+					continue;
-+
-+				found = true;
-+				break;
-+			}
-+
-+			if (!found)
-+				continue;
-+		}
-+
- 		if (link == t->parms.link)
- 			return t;
- 		else
-@@ -132,7 +151,7 @@ ip6_tnl_lookup(struct net *net, int link
- 	}
- 
- 	memset(&any, 0, sizeof(any));
--	hash = HASH(&any, local);
-+	hash = HASH(local);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (!ipv6_addr_equal(local, &t->parms.laddr) ||
- 		    !ipv6_addr_any(&t->parms.raddr) ||
-@@ -145,7 +164,7 @@ ip6_tnl_lookup(struct net *net, int link
- 			cand = t;
- 	}
- 
--	hash = HASH(remote, &any);
-+	hash = HASH(&any);
- 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- 		if (!ipv6_addr_equal(remote, &t->parms.raddr) ||
- 		    !ipv6_addr_any(&t->parms.laddr) ||
-@@ -194,7 +213,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n,
- 
- 	if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) {
- 		prio = 1;
--		h = HASH(remote, local);
-+		h = HASH(local);
- 	}
- 	return &ip6n->tnls[prio][h];
- }
-@@ -376,6 +395,12 @@ ip6_tnl_dev_uninit(struct net_device *de
- 	struct net *net = t->net;
- 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- 
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+
- 	if (dev == ip6n->fb_tnl_dev)
- 		RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
- 	else
-@@ -788,6 +813,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
- }
- EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
- 
-+/**
-+ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR
-+ *   @dest: destination IPv6 address buffer
-+ *   @skb: received socket buffer
-+ *   @fmr: MAP FMR
-+ *   @xmit: Calculate for xmit or rcv
-+ **/
-+static void ip4ip6_fmr_calc(struct in6_addr *dest,
-+		const struct iphdr *iph, const uint8_t *end,
-+		const struct __ip6_tnl_fmr *fmr, bool xmit)
-+{
-+	int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len);
-+	u8 *portp = NULL;
-+	bool use_dest_addr;
-+	const struct iphdr *dsth = iph;
-+
-+	if ((u8*)dsth >= end)
-+		return;
-+
-+	/* find significant IP header */
-+	if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+		if (ih && ((u8*)&ih[1]) <= end && (
-+			ih->type == ICMP_DEST_UNREACH ||
-+			ih->type == ICMP_SOURCE_QUENCH ||
-+			ih->type == ICMP_TIME_EXCEEDED ||
-+			ih->type == ICMP_PARAMETERPROB ||
-+			ih->type == ICMP_REDIRECT))
-+				dsth = (const struct iphdr*)&ih[1];
-+	}
-+
-+	/* in xmit-path use dest port by default and source port only if
-+		this is an ICMP reply to something else; vice versa in rcv-path */
-+	use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph);
-+
-+	/* get dst port */
-+	if (((u8*)&dsth[1]) <= end && (
-+		dsth->protocol == IPPROTO_UDP ||
-+		dsth->protocol == IPPROTO_TCP ||
-+		dsth->protocol == IPPROTO_SCTP ||
-+		dsth->protocol == IPPROTO_DCCP)) {
-+			/* for UDP, TCP, SCTP and DCCP source and dest port
-+			follow IPv4 header directly */
-+			portp = ((u8*)dsth) + dsth->ihl * 4;
-+
-+			if (use_dest_addr)
-+				portp += sizeof(u16);
-+	} else if (iph->protocol == IPPROTO_ICMP) {
-+		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+
-+		/* use icmp identifier as port */
-+		if (((u8*)&ih) <= end && (
-+		    (use_dest_addr && (
-+		    ih->type == ICMP_ECHOREPLY ||
-+			ih->type == ICMP_TIMESTAMPREPLY ||
-+			ih->type == ICMP_INFO_REPLY ||
-+			ih->type == ICMP_ADDRESSREPLY)) ||
-+			(!use_dest_addr && (
-+			ih->type == ICMP_ECHO ||
-+			ih->type == ICMP_TIMESTAMP ||
-+			ih->type == ICMP_INFO_REQUEST ||
-+			ih->type == ICMP_ADDRESS)
-+			)))
-+				portp = (u8*)&ih->un.echo.id;
-+	}
-+
-+	if ((portp && &portp[2] <= end) || psidlen == 0) {
-+		int frombyte = fmr->ip6_prefix_len / 8;
-+		int fromrem = fmr->ip6_prefix_len % 8;
-+		int bytes = sizeof(struct in6_addr) - frombyte;
-+		const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr;
-+		u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len);
-+		u64 t = 0;
-+
-+		/* extract PSID from port and add it to eabits */
-+		u16 psidbits = 0;
-+		if (psidlen > 0) {
-+			psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]);
-+			psidbits >>= 16 - psidlen - fmr->offset;
-+			psidbits = (u16)(psidbits << (16 - psidlen));
-+			eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen));
-+		}
-+
-+		/* rewrite destination address */
-+		*dest = fmr->ip6_prefix;
-+		memcpy(&dest->s6_addr[10], addr, sizeof(*addr));
-+		dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen));
-+
-+		if (bytes > sizeof(u64))
-+			bytes = sizeof(u64);
-+
-+		/* insert eabits */
-+		memcpy(&t, &dest->s6_addr[frombyte], bytes);
-+		t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1)
-+			<< (64 - fmr->ea_len - fromrem));
-+		t = cpu_to_be64(t | (eabits >> fromrem));
-+		memcpy(&dest->s6_addr[frombyte], &t, bytes);
-+	}
-+}
-+
-+
- static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
- 			 const struct tnl_ptk_info *tpi,
- 			 struct metadata_dst *tun_dst,
-@@ -855,6 +981,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
- 
- 	memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
- 
-+	if (tpi->proto == htons(ETH_P_IP) && tunnel->parms.fmrs &&
-+		!ipv6_addr_equal(&ipv6h->saddr, &tunnel->parms.raddr)) {
-+			/* Packet didn't come from BR, so lookup FMR */
-+			struct __ip6_tnl_fmr *fmr;
-+			struct in6_addr expected = tunnel->parms.raddr;
-+			for (fmr = tunnel->parms.fmrs; fmr; fmr = fmr->next)
-+				if (ipv6_prefix_equal(&ipv6h->saddr,
-+					&fmr->ip6_prefix, fmr->ip6_prefix_len))
-+						break;
-+
-+			/* Check that IPv6 matches IPv4 source to prevent spoofing */
-+			if (fmr)
-+				ip4ip6_fmr_calc(&expected, ip_hdr(skb),
-+						skb_tail_pointer(skb), fmr, false);
-+
-+			if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) {
-+				rcu_read_unlock();
-+				goto drop;
-+			}
-+	}
-+
- 	__skb_tunnel_rx(skb, tunnel->dev, tunnel->net);
- 
- 	err = dscp_ecn_decapsulate(tunnel, ipv6h, skb);
-@@ -1002,6 +1149,7 @@ static void init_tel_txopt(struct ipv6_t
- 	opt->ops.opt_nflen = 8;
- }
- 
-+
- /**
-  * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
-  *   @t: the outgoing tunnel device
-@@ -1293,6 +1441,7 @@ ipxip6_tnl_xmit(struct sk_buff *skb, str
- 		u8 protocol)
- {
- 	struct ip6_tnl *t = netdev_priv(dev);
-+	struct __ip6_tnl_fmr *fmr;
- 	struct ipv6hdr *ipv6h;
- 	const struct iphdr  *iph;
- 	int encap_limit = -1;
-@@ -1392,6 +1541,18 @@ ipxip6_tnl_xmit(struct sk_buff *skb, str
- 	fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
- 	dsfield = INET_ECN_encapsulate(dsfield, orig_dsfield);
- 
-+	/* try to find matching FMR */
-+	for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+		unsigned mshift = 32 - fmr->ip4_prefix_len;
-+		if (ntohl(fmr->ip4_prefix.s_addr) >> mshift ==
-+				ntohl(ip_hdr(skb)->daddr) >> mshift)
-+			break;
-+	}
-+
-+	/* change dstaddr according to FMR */
-+	if (fmr)
-+		ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true);
-+
- 	if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
- 		return -1;
- 
-@@ -1546,6 +1707,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
- 	t->parms.link = p->link;
- 	t->parms.proto = p->proto;
- 	t->parms.fwmark = p->fwmark;
-+
-+	while (t->parms.fmrs) {
-+		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+		kfree(t->parms.fmrs);
-+		t->parms.fmrs = next;
-+	}
-+	t->parms.fmrs = p->fmrs;
-+
- 	dst_cache_reset(&t->dst_cache);
- 	ip6_tnl_link_config(t);
- }
-@@ -1580,6 +1749,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
- 	p->flowinfo = u->flowinfo;
- 	p->link = u->link;
- 	p->proto = u->proto;
-+	p->fmrs = NULL;
- 	memcpy(p->name, u->name, sizeof(u->name));
- }
- 
-@@ -1967,6 +2137,15 @@ static int ip6_tnl_validate(struct nlatt
- 	return 0;
- }
- 
-+static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = {
-+	[IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) },
-+	[IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 },
-+	[IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 }
-+};
-+
- static void ip6_tnl_netlink_parms(struct nlattr *data[],
- 				  struct __ip6_tnl_parm *parms)
- {
-@@ -2004,6 +2183,46 @@ static void ip6_tnl_netlink_parms(struct
- 
- 	if (data[IFLA_IPTUN_FWMARK])
- 		parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]);
-+
-+	if (data[IFLA_IPTUN_FMRS]) {
-+		unsigned rem;
-+		struct nlattr *fmr;
-+		nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) {
-+			struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c;
-+			struct __ip6_tnl_fmr *nfmr;
-+
-+			nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX,
-+				fmr, ip6_tnl_fmr_policy, NULL);
-+
-+			if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL)))
-+				continue;
-+
-+			nfmr->offset = 6;
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX]))
-+				nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX],
-+					sizeof(nfmr->ip6_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX]))
-+				nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX],
-+					sizeof(nfmr->ip4_prefix));
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN]))
-+				nfmr->ip6_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN]))
-+				nfmr->ip4_prefix_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN]))
-+				nfmr->ea_len = nla_get_u8(c);
-+
-+			if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET]))
-+				nfmr->offset = nla_get_u8(c);
-+
-+			nfmr->next = parms->fmrs;
-+			parms->fmrs = nfmr;
-+		}
-+	}
- }
- 
- static int ip6_tnl_newlink(struct net *src_net, struct net_device *dev,
-@@ -2087,6 +2306,12 @@ static void ip6_tnl_dellink(struct net_d
- 
- static size_t ip6_tnl_get_size(const struct net_device *dev)
- {
-+	const struct ip6_tnl *t = netdev_priv(dev);
-+	struct __ip6_tnl_fmr *c;
-+	int fmrs = 0;
-+	for (c = t->parms.fmrs; c; c = c->next)
-+		++fmrs;
-+
- 	return
- 		/* IFLA_IPTUN_LINK */
- 		nla_total_size(4) +
-@@ -2116,6 +2341,24 @@ static size_t ip6_tnl_get_size(const str
- 		nla_total_size(0) +
- 		/* IFLA_IPTUN_FWMARK */
- 		nla_total_size(4) +
-+		/* IFLA_IPTUN_FMRS */
-+		nla_total_size(0) +
-+		(
-+			/* nest */
-+			nla_total_size(0) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX */
-+			nla_total_size(sizeof(struct in6_addr)) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX */
-+			nla_total_size(sizeof(struct in_addr)) +
-+			/* IFLA_IPTUN_FMR_EA_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */
-+			nla_total_size(1) +
-+			/* IFLA_IPTUN_FMR_OFFSET */
-+			nla_total_size(1)
-+		) * fmrs +
- 		0;
- }
- 
-@@ -2123,6 +2366,9 @@ static int ip6_tnl_fill_info(struct sk_b
- {
- 	struct ip6_tnl *tunnel = netdev_priv(dev);
- 	struct __ip6_tnl_parm *parm = &tunnel->parms;
-+	struct __ip6_tnl_fmr *c;
-+	int fmrcnt = 0;
-+	struct nlattr *fmrs;
- 
- 	if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
- 	    nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2132,9 +2378,27 @@ static int ip6_tnl_fill_info(struct sk_b
- 	    nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
- 	    nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
- 	    nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
--	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark))
-+	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark) ||
-+	    !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS)))
- 		goto nla_put_failure;
- 
-+	for (c = parm->fmrs; c; c = c->next) {
-+		struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt);
-+		if (!fmr ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX,
-+				sizeof(c->ip6_prefix), &c->ip6_prefix) ||
-+			nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX,
-+				sizeof(c->ip4_prefix), &c->ip4_prefix) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) ||
-+			nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset))
-+				goto nla_put_failure;
-+
-+		nla_nest_end(skb, fmr);
-+	}
-+	nla_nest_end(skb, fmrs);
-+
- 	if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
- 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2174,6 +2438,7 @@ static const struct nla_policy ip6_tnl_p
- 	[IFLA_IPTUN_ENCAP_DPORT]	= { .type = NLA_U16 },
- 	[IFLA_IPTUN_COLLECT_METADATA]	= { .type = NLA_FLAG },
- 	[IFLA_IPTUN_FWMARK]		= { .type = NLA_U32 },
-+	[IFLA_IPTUN_FMRS]		= { .type = NLA_NESTED },
- };
- 
- static struct rtnl_link_ops ip6_link_ops __read_mostly = {
diff --git a/target/linux/generic/pending-6.1/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-6.1/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
deleted file mode 100644
index 1d16b81543b7..000000000000
--- a/target/linux/generic/pending-6.1/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
+++ /dev/null
@@ -1,263 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: ipv6: allow rejecting with "source address failed policy"
-
-RFC6204 L-14 requires rejecting traffic from invalid addresses with
-ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/
-egress policy) on the LAN side, so add an appropriate rule for that.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/net/netns/ipv6.h       |  1 +
- include/uapi/linux/fib_rules.h |  4 +++
- include/uapi/linux/rtnetlink.h |  1 +
- net/ipv4/fib_semantics.c       |  4 +++
- net/ipv4/fib_trie.c            |  1 +
- net/ipv4/ipmr.c                |  1 +
- net/ipv6/fib6_rules.c          |  4 +++
- net/ipv6/ip6mr.c               |  2 ++
- net/ipv6/route.c               | 58 +++++++++++++++++++++++++++++++++++++++++-
- 9 files changed, 75 insertions(+), 1 deletion(-)
-
---- a/include/net/netns/ipv6.h
-+++ b/include/net/netns/ipv6.h
-@@ -85,6 +85,7 @@ struct netns_ipv6 {
- 	unsigned int		fib6_routes_require_src;
- #endif
- 	struct rt6_info         *ip6_prohibit_entry;
-+	struct rt6_info		*ip6_policy_failed_entry;
- 	struct rt6_info         *ip6_blk_hole_entry;
- 	struct fib6_table       *fib6_local_tbl;
- 	struct fib_rules_ops    *fib6_rules_ops;
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -82,6 +82,10 @@ enum {
- 	FR_ACT_BLACKHOLE,	/* Drop without notification */
- 	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
- 	FR_ACT_PROHIBIT,	/* Drop with EACCES */
-+	FR_ACT_RES9,
-+	FR_ACT_RES10,
-+	FR_ACT_RES11,
-+	FR_ACT_POLICY_FAILED,	/* Drop with EACCES */
- 	__FR_ACT_MAX,
- };
- 
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -265,6 +265,7 @@ enum {
- 	RTN_THROW,		/* Not in this table		*/
- 	RTN_NAT,		/* Translate this address	*/
- 	RTN_XRESOLVE,		/* Use external resolver	*/
-+	RTN_POLICY_FAILED,	/* Failed ingress/egress policy */
- 	__RTN_MAX
- };
- 
---- a/net/ipv4/fib_semantics.c
-+++ b/net/ipv4/fib_semantics.c
-@@ -145,6 +145,10 @@ const struct fib_prop fib_props[RTN_MAX
- 		.error	= -EINVAL,
- 		.scope	= RT_SCOPE_NOWHERE,
- 	},
-+	[RTN_POLICY_FAILED] = {
-+		.error	= -EACCES,
-+		.scope	= RT_SCOPE_UNIVERSE,
-+	},
- };
- 
- static void rt_fibinfo_free(struct rtable __rcu **rtp)
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2784,6 +2784,7 @@ static const char *const rtn_type_names[
- 	[RTN_THROW] = "THROW",
- 	[RTN_NAT] = "NAT",
- 	[RTN_XRESOLVE] = "XRESOLVE",
-+	[RTN_POLICY_FAILED] = "POLICY_FAILED",
- };
- 
- static inline const char *rtn_type(char *buf, size_t len, unsigned int t)
---- a/net/ipv4/ipmr.c
-+++ b/net/ipv4/ipmr.c
-@@ -180,6 +180,7 @@ static int ipmr_rule_action(struct fib_r
- 	case FR_ACT_UNREACHABLE:
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
-+	case FR_ACT_POLICY_FAILED:
- 		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
---- a/net/ipv6/fib6_rules.c
-+++ b/net/ipv6/fib6_rules.c
-@@ -221,6 +221,10 @@ static int __fib6_rule_action(struct fib
- 		err = -EACCES;
- 		rt = net->ipv6.ip6_prohibit_entry;
- 		goto discard_pkt;
-+	case FR_ACT_POLICY_FAILED:
-+		err = -EACCES;
-+		rt = net->ipv6.ip6_policy_failed_entry;
-+		goto discard_pkt;
- 	}
- 
- 	tb_id = fib_rule_get_table(rule, arg);
---- a/net/ipv6/ip6mr.c
-+++ b/net/ipv6/ip6mr.c
-@@ -170,6 +170,8 @@ static int ip6mr_rule_action(struct fib_
- 		return -ENETUNREACH;
- 	case FR_ACT_PROHIBIT:
- 		return -EACCES;
-+	case FR_ACT_POLICY_FAILED:
-+		return -EACCES;
- 	case FR_ACT_BLACKHOLE:
- 	default:
- 		return -EINVAL;
---- a/net/ipv6/route.c
-+++ b/net/ipv6/route.c
-@@ -98,6 +98,8 @@ static int		ip6_pkt_discard(struct sk_bu
- static int		ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static int		ip6_pkt_prohibit(struct sk_buff *skb);
- static int		ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed(struct sk_buff *skb);
-+static int		ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static void		ip6_link_failure(struct sk_buff *skb);
- static void		ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- 					   struct sk_buff *skb, u32 mtu,
-@@ -318,6 +320,18 @@ static const struct rt6_info ip6_prohibi
- 	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
- };
- 
-+static const struct rt6_info ip6_policy_failed_entry_template = {
-+	.dst = {
-+		.__refcnt	= ATOMIC_INIT(1),
-+		.__use		= 1,
-+		.obsolete	= DST_OBSOLETE_FORCE_CHK,
-+		.error		= -EACCES,
-+		.input		= ip6_pkt_policy_failed,
-+		.output		= ip6_pkt_policy_failed_out,
-+	},
-+	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
-+};
-+
- static const struct rt6_info ip6_blk_hole_entry_template = {
- 	.dst = {
- 		.__refcnt	= ATOMIC_INIT(1),
-@@ -1042,6 +1056,7 @@ static const int fib6_prop[RTN_MAX + 1]
- 	[RTN_BLACKHOLE]	= -EINVAL,
- 	[RTN_UNREACHABLE] = -EHOSTUNREACH,
- 	[RTN_PROHIBIT]	= -EACCES,
-+	[RTN_POLICY_FAILED] = -EACCES,
- 	[RTN_THROW]	= -EAGAIN,
- 	[RTN_NAT]	= -EINVAL,
- 	[RTN_XRESOLVE]	= -EINVAL,
-@@ -1077,6 +1092,10 @@ static void ip6_rt_init_dst_reject(struc
- 		rt->dst.output = ip6_pkt_prohibit_out;
- 		rt->dst.input = ip6_pkt_prohibit;
- 		break;
-+	case RTN_POLICY_FAILED:
-+		rt->dst.output = ip6_pkt_policy_failed_out;
-+		rt->dst.input = ip6_pkt_policy_failed;
-+		break;
- 	case RTN_THROW:
- 	case RTN_UNREACHABLE:
- 	default:
-@@ -4547,6 +4566,17 @@ static int ip6_pkt_prohibit_out(struct n
- 	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
- }
- 
-+static int ip6_pkt_policy_failed(struct sk_buff *skb)
-+{
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES);
-+}
-+
-+static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb)
-+{
-+	skb->dev = skb_dst(skb)->dev;
-+	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
-+}
-+
- /*
-  *	Allocate a dst for local (unicast / anycast) address.
-  */
-@@ -5040,7 +5070,8 @@ static int rtm_to_fib6_config(struct sk_
- 	if (rtm->rtm_type == RTN_UNREACHABLE ||
- 	    rtm->rtm_type == RTN_BLACKHOLE ||
- 	    rtm->rtm_type == RTN_PROHIBIT ||
--	    rtm->rtm_type == RTN_THROW)
-+	    rtm->rtm_type == RTN_THROW ||
-+	    rtm->rtm_type == RTN_POLICY_FAILED)
- 		cfg->fc_flags |= RTF_REJECT;
- 
- 	if (rtm->rtm_type == RTN_LOCAL)
-@@ -6287,6 +6318,8 @@ static int ip6_route_dev_notify(struct n
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
- 		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
-+		net->ipv6.ip6_policy_failed_entry->dst.dev = dev;
-+		net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev);
- 		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
- 		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
- #endif
-@@ -6298,6 +6331,7 @@ static int ip6_route_dev_notify(struct n
- 		in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 		in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
-+		in6_dev_put_clear(&net->ipv6.ip6_policy_failed_entry->rt6i_idev);
- 		in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
- #endif
- 	}
-@@ -6489,6 +6523,8 @@ static int __net_init ip6_route_net_init
- 
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 	net->ipv6.fib6_has_custom_rules = false;
-+
-+
- 	net->ipv6.ip6_prohibit_entry = kmemdup(&ip6_prohibit_entry_template,
- 					       sizeof(*net->ipv6.ip6_prohibit_entry),
- 					       GFP_KERNEL);
-@@ -6499,11 +6535,21 @@ static int __net_init ip6_route_net_init
- 			 ip6_template_metrics, true);
- 	INIT_LIST_HEAD(&net->ipv6.ip6_prohibit_entry->rt6i_uncached);
- 
-+	net->ipv6.ip6_policy_failed_entry =
-+				kmemdup(&ip6_policy_failed_entry_template,
-+				sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL);
-+	if (!net->ipv6.ip6_policy_failed_entry)
-+		goto out_ip6_prohibit_entry;
-+	net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops;
-+	dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst,
-+			 ip6_template_metrics, true);
-+	INIT_LIST_HEAD(&net->ipv6.ip6_policy_failed_entry->rt6i_uncached);
-+
- 	net->ipv6.ip6_blk_hole_entry = kmemdup(&ip6_blk_hole_entry_template,
- 					       sizeof(*net->ipv6.ip6_blk_hole_entry),
- 					       GFP_KERNEL);
- 	if (!net->ipv6.ip6_blk_hole_entry)
--		goto out_ip6_prohibit_entry;
-+		goto out_ip6_policy_failed_entry;
- 	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
- 	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
- 			 ip6_template_metrics, true);
-@@ -6530,6 +6576,8 @@ out:
- 	return ret;
- 
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
-+out_ip6_policy_failed_entry:
-+	kfree(net->ipv6.ip6_policy_failed_entry);
- out_ip6_prohibit_entry:
- 	kfree(net->ipv6.ip6_prohibit_entry);
- out_ip6_null_entry:
-@@ -6549,6 +6597,7 @@ static void __net_exit ip6_route_net_exi
- 	kfree(net->ipv6.ip6_null_entry);
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- 	kfree(net->ipv6.ip6_prohibit_entry);
-+	kfree(net->ipv6.ip6_policy_failed_entry);
- 	kfree(net->ipv6.ip6_blk_hole_entry);
- #endif
- 	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
-@@ -6632,6 +6681,9 @@ void __init ip6_route_init_special_entri
- 	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
- 	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
- 	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
-+	init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev;
-+	init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
-+		in6_dev_get(init_net.loopback_dev);
-   #endif
- }
- 
diff --git a/target/linux/generic/pending-6.1/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch b/target/linux/generic/pending-6.1/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
deleted file mode 100644
index 94416a5d70e5..000000000000
--- a/target/linux/generic/pending-6.1/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: net: provide defines for _POLICY_FAILED until all code is updated
-
-Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination
-unreachable, conflicting with our name.
-
-Add appropriate defines to allow our code to build with the new
-name until we have updated our local patches for older kernels
-and userspace packages.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/uapi/linux/fib_rules.h | 2 ++
- include/uapi/linux/icmpv6.h    | 2 ++
- include/uapi/linux/rtnetlink.h | 2 ++
- 3 files changed, 6 insertions(+)
-
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -89,6 +89,8 @@ enum {
- 	__FR_ACT_MAX,
- };
- 
-+#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED
-+
- #define FR_ACT_MAX (__FR_ACT_MAX - 1)
- 
- #endif
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -126,6 +126,8 @@ struct icmp6hdr {
- #define ICMPV6_POLICY_FAIL		5
- #define ICMPV6_REJECT_ROUTE		6
- 
-+#define ICMPV6_FAILED_POLICY		ICMPV6_POLICY_FAIL
-+
- /*
-  *	Codes for Time Exceeded
-  */
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -269,6 +269,8 @@ enum {
- 	__RTN_MAX
- };
- 
-+#define RTN_FAILED_POLICY RTN_POLICY_FAILED
-+
- #define RTN_MAX (__RTN_MAX - 1)
- 
- 
diff --git a/target/linux/generic/pending-6.1/680-net-add-TCP-fraglist-GRO-support.patch b/target/linux/generic/pending-6.1/680-net-add-TCP-fraglist-GRO-support.patch
deleted file mode 100644
index 012d6b87bacd..000000000000
--- a/target/linux/generic/pending-6.1/680-net-add-TCP-fraglist-GRO-support.patch
+++ /dev/null
@@ -1,627 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 23 Apr 2024 11:23:03 +0200
-Subject: [PATCH] net: add TCP fraglist GRO support
-
-When forwarding TCP after GRO, software segmentation is very expensive,
-especially when the checksum needs to be recalculated.
-One case where that's currently unavoidable is when routing packets over
-PPPoE. Performance improves significantly when using fraglist GRO
-implemented in the same way as for UDP.
-
-Here's a measurement of running 2 TCP streams through a MediaTek MT7622
-device (2-core Cortex-A53), which runs NAT with flow offload enabled from
-one ethernet port to PPPoE on another ethernet port + cake qdisc set to
-1Gbps.
-
-rx-gro-list off: 630 Mbit/s, CPU 35% idle
-rx-gro-list on:  770 Mbit/s, CPU 40% idle
-
-Signe-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/gro.h
-+++ b/include/net/gro.h
-@@ -424,6 +424,7 @@ static inline __wsum ip6_gro_compute_pse
- }
- 
- int skb_gro_receive(struct sk_buff *p, struct sk_buff *skb);
-+int skb_gro_receive_list(struct sk_buff *p, struct sk_buff *skb);
- 
- /* Pass the currently batched GRO_NORMAL SKBs up to the stack. */
- static inline void gro_normal_list(struct napi_struct *napi)
-@@ -446,5 +447,48 @@ static inline void gro_normal_one(struct
- 		gro_normal_list(napi);
- }
- 
-+/* This function is the alternative of 'inet_iif' and 'inet_sdif'
-+ * functions in case we can not rely on fields of IPCB.
-+ *
-+ * The caller must verify skb_valid_dst(skb) is false and skb->dev is initialized.
-+ * The caller must hold the RCU read lock.
-+ */
-+static inline void inet_get_iif_sdif(const struct sk_buff *skb, int *iif, int *sdif)
-+{
-+	*iif = inet_iif(skb) ?: skb->dev->ifindex;
-+	*sdif = 0;
-+
-+#if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV)
-+	if (netif_is_l3_slave(skb->dev)) {
-+		struct net_device *master = netdev_master_upper_dev_get_rcu(skb->dev);
-+
-+		*sdif = *iif;
-+		*iif = master ? master->ifindex : 0;
-+	}
-+#endif
-+}
-+
-+/* This function is the alternative of 'inet6_iif' and 'inet6_sdif'
-+ * functions in case we can not rely on fields of IP6CB.
-+ *
-+ * The caller must verify skb_valid_dst(skb) is false and skb->dev is initialized.
-+ * The caller must hold the RCU read lock.
-+ */
-+static inline void inet6_get_iif_sdif(const struct sk_buff *skb, int *iif, int *sdif)
-+{
-+	/* using skb->dev->ifindex because skb_dst(skb) is not initialized */
-+	*iif = skb->dev->ifindex;
-+	*sdif = 0;
-+
-+#if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV)
-+	if (netif_is_l3_slave(skb->dev)) {
-+		struct net_device *master = netdev_master_upper_dev_get_rcu(skb->dev);
-+
-+		*sdif = *iif;
-+		*iif = master ? master->ifindex : 0;
-+	}
-+#endif
-+}
-+
- 
- #endif /* _NET_IPV6_GRO_H */
---- a/include/net/tcp.h
-+++ b/include/net/tcp.h
-@@ -2058,7 +2058,10 @@ void tcp_v4_destroy_sock(struct sock *sk
- 
- struct sk_buff *tcp_gso_segment(struct sk_buff *skb,
- 				netdev_features_t features);
--struct sk_buff *tcp_gro_receive(struct list_head *head, struct sk_buff *skb);
-+struct tcphdr *tcp_gro_pull_header(struct sk_buff *skb);
-+struct sk_buff *tcp_gro_lookup(struct list_head *head, struct tcphdr *th);
-+struct sk_buff *tcp_gro_receive(struct list_head *head, struct sk_buff *skb,
-+				struct tcphdr *th);
- INDIRECT_CALLABLE_DECLARE(int tcp4_gro_complete(struct sk_buff *skb, int thoff));
- INDIRECT_CALLABLE_DECLARE(struct sk_buff *tcp4_gro_receive(struct list_head *head, struct sk_buff *skb));
- INDIRECT_CALLABLE_DECLARE(int tcp6_gro_complete(struct sk_buff *skb, int thoff));
---- a/net/core/gro.c
-+++ b/net/core/gro.c
-@@ -290,6 +290,33 @@ done:
- 	return 0;
- }
- 
-+int skb_gro_receive_list(struct sk_buff *p, struct sk_buff *skb)
-+{
-+	if (unlikely(p->len + skb->len >= 65536))
-+		return -E2BIG;
-+
-+	if (NAPI_GRO_CB(p)->last == p)
-+		skb_shinfo(p)->frag_list = skb;
-+	else
-+		NAPI_GRO_CB(p)->last->next = skb;
-+
-+	skb_pull(skb, skb_gro_offset(skb));
-+
-+	NAPI_GRO_CB(p)->last = skb;
-+	NAPI_GRO_CB(p)->count++;
-+	p->data_len += skb->len;
-+
-+	/* sk ownership - if any - completely transferred to the aggregated packet */
-+	skb->destructor = NULL;
-+	skb->sk = NULL;
-+	p->truesize += skb->truesize;
-+	p->len += skb->len;
-+
-+	NAPI_GRO_CB(skb)->same_flow = 1;
-+
-+	return 0;
-+}
-+
- 
- static void napi_gro_complete(struct napi_struct *napi, struct sk_buff *skb)
- {
---- a/net/ipv4/tcp_offload.c
-+++ b/net/ipv4/tcp_offload.c
-@@ -27,6 +27,70 @@ static void tcp_gso_tstamp(struct sk_buf
- 	}
- }
- 
-+static void __tcpv4_gso_segment_csum(struct sk_buff *seg,
-+				     __be32 *oldip, __be32 newip,
-+				     __be16 *oldport, __be16 newport)
-+{
-+	struct tcphdr *th;
-+	struct iphdr *iph;
-+
-+	if (*oldip == newip && *oldport == newport)
-+		return;
-+
-+	th = tcp_hdr(seg);
-+	iph = ip_hdr(seg);
-+
-+	inet_proto_csum_replace4(&th->check, seg, *oldip, newip, true);
-+	inet_proto_csum_replace2(&th->check, seg, *oldport, newport, false);
-+	*oldport = newport;
-+
-+	csum_replace4(&iph->check, *oldip, newip);
-+	*oldip = newip;
-+}
-+
-+static struct sk_buff *__tcpv4_gso_segment_list_csum(struct sk_buff *segs)
-+{
-+	const struct tcphdr *th;
-+	const struct iphdr *iph;
-+	struct sk_buff *seg;
-+	struct tcphdr *th2;
-+	struct iphdr *iph2;
-+
-+	seg = segs;
-+	th = tcp_hdr(seg);
-+	iph = ip_hdr(seg);
-+	th2 = tcp_hdr(seg->next);
-+	iph2 = ip_hdr(seg->next);
-+
-+	if (!(*(const u32 *)&th->source ^ *(const u32 *)&th2->source) &&
-+	    iph->daddr == iph2->daddr && iph->saddr == iph2->saddr)
-+		return segs;
-+
-+	while ((seg = seg->next)) {
-+		th2 = tcp_hdr(seg);
-+		iph2 = ip_hdr(seg);
-+
-+		__tcpv4_gso_segment_csum(seg,
-+					 &iph2->saddr, iph->saddr,
-+					 &th2->source, th->source);
-+		__tcpv4_gso_segment_csum(seg,
-+					 &iph2->daddr, iph->daddr,
-+					 &th2->dest, th->dest);
-+	}
-+
-+	return segs;
-+}
-+
-+static struct sk_buff *__tcp4_gso_segment_list(struct sk_buff *skb,
-+					      netdev_features_t features)
-+{
-+	skb = skb_segment_list(skb, features, skb_mac_header_len(skb));
-+	if (IS_ERR(skb))
-+		return skb;
-+
-+	return __tcpv4_gso_segment_list_csum(skb);
-+}
-+
- static struct sk_buff *tcp4_gso_segment(struct sk_buff *skb,
- 					netdev_features_t features)
- {
-@@ -36,6 +100,9 @@ static struct sk_buff *tcp4_gso_segment(
- 	if (!pskb_may_pull(skb, sizeof(struct tcphdr)))
- 		return ERR_PTR(-EINVAL);
- 
-+	if (skb_shinfo(skb)->gso_type & SKB_GSO_FRAGLIST)
-+		return __tcp4_gso_segment_list(skb, features);
-+
- 	if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) {
- 		const struct iphdr *iph = ip_hdr(skb);
- 		struct tcphdr *th = tcp_hdr(skb);
-@@ -180,61 +247,76 @@ out:
- 	return segs;
- }
- 
--struct sk_buff *tcp_gro_receive(struct list_head *head, struct sk_buff *skb)
-+struct sk_buff *tcp_gro_lookup(struct list_head *head, struct tcphdr *th)
- {
--	struct sk_buff *pp = NULL;
-+	struct tcphdr *th2;
- 	struct sk_buff *p;
-+
-+	list_for_each_entry(p, head, list) {
-+		if (!NAPI_GRO_CB(p)->same_flow)
-+			continue;
-+
-+		th2 = tcp_hdr(p);
-+		if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
-+			NAPI_GRO_CB(p)->same_flow = 0;
-+			continue;
-+		}
-+
-+		return p;
-+	}
-+
-+	return NULL;
-+}
-+
-+struct tcphdr *tcp_gro_pull_header(struct sk_buff *skb)
-+{
-+	unsigned int thlen, hlen, off;
- 	struct tcphdr *th;
--	struct tcphdr *th2;
--	unsigned int len;
--	unsigned int thlen;
--	__be32 flags;
--	unsigned int mss = 1;
--	unsigned int hlen;
--	unsigned int off;
--	int flush = 1;
--	int i;
- 
- 	off = skb_gro_offset(skb);
- 	hlen = off + sizeof(*th);
- 	th = skb_gro_header(skb, hlen, off);
- 	if (unlikely(!th))
--		goto out;
-+		return NULL;
- 
- 	thlen = th->doff * 4;
- 	if (thlen < sizeof(*th))
--		goto out;
-+		return NULL;
- 
- 	hlen = off + thlen;
- 	if (skb_gro_header_hard(skb, hlen)) {
- 		th = skb_gro_header_slow(skb, hlen, off);
- 		if (unlikely(!th))
--			goto out;
-+			return NULL;
- 	}
- 
- 	skb_gro_pull(skb, thlen);
- 
--	len = skb_gro_len(skb);
--	flags = tcp_flag_word(th);
--
--	list_for_each_entry(p, head, list) {
--		if (!NAPI_GRO_CB(p)->same_flow)
--			continue;
-+	return th;
-+}
- 
--		th2 = tcp_hdr(p);
-+struct sk_buff *tcp_gro_receive(struct list_head *head, struct sk_buff *skb,
-+				struct tcphdr *th)
-+{
-+	unsigned int thlen = th->doff * 4;
-+	struct sk_buff *pp = NULL;
-+	struct sk_buff *p;
-+	struct tcphdr *th2;
-+	unsigned int len;
-+	__be32 flags;
-+	unsigned int mss = 1;
-+	int flush = 1;
-+	int i;
- 
--		if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
--			NAPI_GRO_CB(p)->same_flow = 0;
--			continue;
--		}
-+	len = skb_gro_len(skb);
-+	flags = tcp_flag_word(th);
- 
--		goto found;
--	}
--	p = NULL;
--	goto out_check_final;
-+	p = tcp_gro_lookup(head, th);
-+	if (!p)
-+		goto out_check_final;
- 
--found:
- 	/* Include the IP ID check below from the inner most IP hdr */
-+	th2 = tcp_hdr(p);
- 	flush = NAPI_GRO_CB(p)->flush;
- 	flush |= (__force int)(flags & TCP_FLAG_CWR);
- 	flush |= (__force int)((flags ^ tcp_flag_word(th2)) &
-@@ -271,6 +353,19 @@ found:
- 	flush |= p->decrypted ^ skb->decrypted;
- #endif
- 
-+	if (unlikely(NAPI_GRO_CB(p)->is_flist)) {
-+		flush |= (__force int)(flags ^ tcp_flag_word(th2));
-+		flush |= skb->ip_summed != p->ip_summed;
-+		flush |= skb->csum_level != p->csum_level;
-+		flush |= !pskb_may_pull(skb, skb_gro_offset(skb));
-+		flush |= NAPI_GRO_CB(p)->count >= 64;
-+
-+		if (flush || skb_gro_receive_list(p, skb))
-+			mss = 1;
-+
-+		goto out_check_final;
-+	}
-+
- 	if (flush || skb_gro_receive(p, skb)) {
- 		mss = 1;
- 		goto out_check_final;
-@@ -292,7 +387,6 @@ out_check_final:
- 	if (p && (!NAPI_GRO_CB(skb)->same_flow || flush))
- 		pp = p;
- 
--out:
- 	NAPI_GRO_CB(skb)->flush |= (flush != 0);
- 
- 	return pp;
-@@ -318,18 +412,58 @@ int tcp_gro_complete(struct sk_buff *skb
- }
- EXPORT_SYMBOL(tcp_gro_complete);
- 
-+static void tcp4_check_fraglist_gro(struct list_head *head, struct sk_buff *skb,
-+				    struct tcphdr *th)
-+{
-+	const struct iphdr *iph;
-+	struct sk_buff *p;
-+	struct sock *sk;
-+	struct net *net;
-+	int iif, sdif;
-+
-+	if (!(skb->dev->features & NETIF_F_GRO_FRAGLIST))
-+		return;
-+
-+	p = tcp_gro_lookup(head, th);
-+	if (p) {
-+		NAPI_GRO_CB(skb)->is_flist = NAPI_GRO_CB(p)->is_flist;
-+		return;
-+	}
-+
-+	inet_get_iif_sdif(skb, &iif, &sdif);
-+	iph = skb_gro_network_header(skb);
-+	net = dev_net(skb->dev);
-+	sk = __inet_lookup_established(net, net->ipv4.tcp_death_row.hashinfo,
-+				       iph->saddr, th->source,
-+				       iph->daddr, ntohs(th->dest),
-+				       iif, sdif);
-+	NAPI_GRO_CB(skb)->is_flist = !sk;
-+	if (sk)
-+		sock_put(sk);
-+}
-+
- INDIRECT_CALLABLE_SCOPE
- struct sk_buff *tcp4_gro_receive(struct list_head *head, struct sk_buff *skb)
- {
-+	struct tcphdr *th;
-+
- 	/* Don't bother verifying checksum if we're going to flush anyway. */
- 	if (!NAPI_GRO_CB(skb)->flush &&
- 	    skb_gro_checksum_validate(skb, IPPROTO_TCP,
--				      inet_gro_compute_pseudo)) {
--		NAPI_GRO_CB(skb)->flush = 1;
--		return NULL;
--	}
-+				      inet_gro_compute_pseudo))
-+		goto flush;
-+
-+	th = tcp_gro_pull_header(skb);
-+	if (!th)
-+		goto flush;
- 
--	return tcp_gro_receive(head, skb);
-+	tcp4_check_fraglist_gro(head, skb, th);
-+
-+	return tcp_gro_receive(head, skb, th);
-+
-+flush:
-+	NAPI_GRO_CB(skb)->flush = 1;
-+	return NULL;
- }
- 
- INDIRECT_CALLABLE_SCOPE int tcp4_gro_complete(struct sk_buff *skb, int thoff)
-@@ -337,6 +471,15 @@ INDIRECT_CALLABLE_SCOPE int tcp4_gro_com
- 	const struct iphdr *iph = ip_hdr(skb);
- 	struct tcphdr *th = tcp_hdr(skb);
- 
-+	if (unlikely(NAPI_GRO_CB(skb)->is_flist)) {
-+		skb_shinfo(skb)->gso_type |= SKB_GSO_FRAGLIST | SKB_GSO_TCPV4;
-+		skb_shinfo(skb)->gso_segs = NAPI_GRO_CB(skb)->count;
-+
-+		__skb_incr_checksum_unnecessary(skb);
-+
-+		return 0;
-+	}
-+
- 	th->check = ~tcp_v4_check(skb->len - thoff, iph->saddr,
- 				  iph->daddr, 0);
- 	skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4;
---- a/net/ipv4/udp_offload.c
-+++ b/net/ipv4/udp_offload.c
-@@ -437,33 +437,6 @@ out:
- 	return segs;
- }
- 
--static int skb_gro_receive_list(struct sk_buff *p, struct sk_buff *skb)
--{
--	if (unlikely(p->len + skb->len >= 65536))
--		return -E2BIG;
--
--	if (NAPI_GRO_CB(p)->last == p)
--		skb_shinfo(p)->frag_list = skb;
--	else
--		NAPI_GRO_CB(p)->last->next = skb;
--
--	skb_pull(skb, skb_gro_offset(skb));
--
--	NAPI_GRO_CB(p)->last = skb;
--	NAPI_GRO_CB(p)->count++;
--	p->data_len += skb->len;
--
--	/* sk ownership - if any - completely transferred to the aggregated packet */
--	skb->destructor = NULL;
--	skb->sk = NULL;
--	p->truesize += skb->truesize;
--	p->len += skb->len;
--
--	NAPI_GRO_CB(skb)->same_flow = 1;
--
--	return 0;
--}
--
- 
- #define UDP_GRO_CNT_MAX 64
- static struct sk_buff *udp_gro_receive_segment(struct list_head *head,
---- a/net/ipv6/tcpv6_offload.c
-+++ b/net/ipv6/tcpv6_offload.c
-@@ -7,24 +7,67 @@
-  */
- #include <linux/indirect_call_wrapper.h>
- #include <linux/skbuff.h>
-+#include <net/inet6_hashtables.h>
- #include <net/gro.h>
- #include <net/protocol.h>
- #include <net/tcp.h>
- #include <net/ip6_checksum.h>
- #include "ip6_offload.h"
- 
-+static void tcp6_check_fraglist_gro(struct list_head *head, struct sk_buff *skb,
-+				    struct tcphdr *th)
-+{
-+#if IS_ENABLED(CONFIG_IPV6)
-+	const struct ipv6hdr *hdr;
-+	struct sk_buff *p;
-+	struct sock *sk;
-+	struct net *net;
-+	int iif, sdif;
-+
-+	if (!(skb->dev->features & NETIF_F_GRO_FRAGLIST))
-+		return;
-+
-+	p = tcp_gro_lookup(head, th);
-+	if (p) {
-+		NAPI_GRO_CB(skb)->is_flist = NAPI_GRO_CB(p)->is_flist;
-+		return;
-+	}
-+
-+	inet6_get_iif_sdif(skb, &iif, &sdif);
-+	hdr = skb_gro_network_header(skb);
-+	net = dev_net(skb->dev);
-+	sk = __inet6_lookup_established(net, net->ipv4.tcp_death_row.hashinfo,
-+					&hdr->saddr, th->source,
-+					&hdr->daddr, ntohs(th->dest),
-+					iif, sdif);
-+	NAPI_GRO_CB(skb)->is_flist = !sk;
-+	if (sk)
-+		sock_put(sk);
-+#endif /* IS_ENABLED(CONFIG_IPV6) */
-+}
-+
- INDIRECT_CALLABLE_SCOPE
- struct sk_buff *tcp6_gro_receive(struct list_head *head, struct sk_buff *skb)
- {
-+	struct tcphdr *th;
-+
- 	/* Don't bother verifying checksum if we're going to flush anyway. */
- 	if (!NAPI_GRO_CB(skb)->flush &&
- 	    skb_gro_checksum_validate(skb, IPPROTO_TCP,
--				      ip6_gro_compute_pseudo)) {
--		NAPI_GRO_CB(skb)->flush = 1;
--		return NULL;
--	}
-+				      ip6_gro_compute_pseudo))
-+		goto flush;
- 
--	return tcp_gro_receive(head, skb);
-+	th = tcp_gro_pull_header(skb);
-+	if (!th)
-+		goto flush;
-+
-+	tcp6_check_fraglist_gro(head, skb, th);
-+
-+	return tcp_gro_receive(head, skb, th);
-+
-+flush:
-+	NAPI_GRO_CB(skb)->flush = 1;
-+	return NULL;
- }
- 
- INDIRECT_CALLABLE_SCOPE int tcp6_gro_complete(struct sk_buff *skb, int thoff)
-@@ -32,6 +75,15 @@ INDIRECT_CALLABLE_SCOPE int tcp6_gro_com
- 	const struct ipv6hdr *iph = ipv6_hdr(skb);
- 	struct tcphdr *th = tcp_hdr(skb);
- 
-+	if (unlikely(NAPI_GRO_CB(skb)->is_flist)) {
-+		skb_shinfo(skb)->gso_type |= SKB_GSO_FRAGLIST | SKB_GSO_TCPV6;
-+		skb_shinfo(skb)->gso_segs = NAPI_GRO_CB(skb)->count;
-+
-+		__skb_incr_checksum_unnecessary(skb);
-+
-+		return 0;
-+	}
-+
- 	th->check = ~tcp_v6_check(skb->len - thoff, &iph->saddr,
- 				  &iph->daddr, 0);
- 	skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV6;
-@@ -39,6 +91,61 @@ INDIRECT_CALLABLE_SCOPE int tcp6_gro_com
- 	return tcp_gro_complete(skb);
- }
- 
-+static void __tcpv6_gso_segment_csum(struct sk_buff *seg,
-+				     __be16 *oldport, __be16 newport)
-+{
-+	struct tcphdr *th;
-+
-+	if (*oldport == newport)
-+		return;
-+
-+	th = tcp_hdr(seg);
-+	inet_proto_csum_replace2(&th->check, seg, *oldport, newport, false);
-+	*oldport = newport;
-+}
-+
-+static struct sk_buff *__tcpv6_gso_segment_list_csum(struct sk_buff *segs)
-+{
-+	const struct tcphdr *th;
-+	const struct ipv6hdr *iph;
-+	struct sk_buff *seg;
-+	struct tcphdr *th2;
-+	struct ipv6hdr *iph2;
-+
-+	seg = segs;
-+	th = tcp_hdr(seg);
-+	iph = ipv6_hdr(seg);
-+	th2 = tcp_hdr(seg->next);
-+	iph2 = ipv6_hdr(seg->next);
-+
-+	if (!(*(const u32 *)&th->source ^ *(const u32 *)&th2->source) &&
-+	    ipv6_addr_equal(&iph->saddr, &iph2->saddr) &&
-+	    ipv6_addr_equal(&iph->daddr, &iph2->daddr))
-+		return segs;
-+
-+	while ((seg = seg->next)) {
-+		th2 = tcp_hdr(seg);
-+		iph2 = ipv6_hdr(seg);
-+
-+		iph2->saddr = iph->saddr;
-+		iph2->daddr = iph->daddr;
-+		__tcpv6_gso_segment_csum(seg, &th2->source, th->source);
-+		__tcpv6_gso_segment_csum(seg, &th2->dest, th->dest);
-+	}
-+
-+	return segs;
-+}
-+
-+static struct sk_buff *__tcp6_gso_segment_list(struct sk_buff *skb,
-+					      netdev_features_t features)
-+{
-+	skb = skb_segment_list(skb, features, skb_mac_header_len(skb));
-+	if (IS_ERR(skb))
-+		return skb;
-+
-+	return __tcpv6_gso_segment_list_csum(skb);
-+}
-+
- static struct sk_buff *tcp6_gso_segment(struct sk_buff *skb,
- 					netdev_features_t features)
- {
-@@ -50,6 +157,9 @@ static struct sk_buff *tcp6_gso_segment(
- 	if (!pskb_may_pull(skb, sizeof(*th)))
- 		return ERR_PTR(-EINVAL);
- 
-+	if (skb_shinfo(skb)->gso_type & SKB_GSO_FRAGLIST)
-+		return __tcp6_gso_segment_list(skb, features);
-+
- 	if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) {
- 		const struct ipv6hdr *ipv6h = ipv6_hdr(skb);
- 		struct tcphdr *th = tcp_hdr(skb);
diff --git a/target/linux/generic/pending-6.1/683-of_net-add-mac-address-to-of-tree.patch b/target/linux/generic/pending-6.1/683-of_net-add-mac-address-to-of-tree.patch
deleted file mode 100644
index 03ee537fb8f8..000000000000
--- a/target/linux/generic/pending-6.1/683-of_net-add-mac-address-to-of-tree.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 8585756342caa6d27008d1ad0c18023e4211a40a Mon Sep 17 00:00:00 2001
-From: OpenWrt community <openwrt-devel@lists.openwrt.org>
-Date: Wed, 13 Jul 2022 12:22:48 +0200
-Subject: [PATCH] of/of_net: write back netdev MAC-address to device-tree
-
-The label-mac logic relies on the mac-address property of a netdev
-devices of-node. However, the mac address can also be stored as a
-different property or read from e.g. an mtd device.
-
-Create this node when reading a mac-address from OF if it does not
-already exist and copy the mac-address used for the device to this
-property. This way, the MAC address can be accessed using procfs.
-
----
- net/core/of_net.c | 22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/net/core/of_net.c
-+++ b/net/core/of_net.c
-@@ -95,6 +95,27 @@ static int of_get_mac_addr_nvmem(struct
- 	return 0;
- }
- 
-+static int of_add_mac_address(struct device_node *np, u8* addr)
-+{
-+	struct property *prop;
-+
-+	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-+	if (!prop)
-+		return -ENOMEM;
-+
-+	prop->name = "mac-address";
-+	prop->length = ETH_ALEN;
-+	prop->value = kmemdup(addr, ETH_ALEN, GFP_KERNEL);
-+	if (!prop->value || of_update_property(np, prop))
-+		goto free;
-+
-+	return 0;
-+free:
-+	kfree(prop->value);
-+	kfree(prop);
-+	return -ENOMEM;
-+}
-+
- /**
-  * of_get_mac_address()
-  * @np:		Caller's Device Node
-@@ -130,17 +151,23 @@ int of_get_mac_address(struct device_nod
- 
- 	ret = of_get_mac_addr(np, "mac-address", addr);
- 	if (!ret)
--		return 0;
-+		goto found;
- 
- 	ret = of_get_mac_addr(np, "local-mac-address", addr);
- 	if (!ret)
--		return 0;
-+		goto found;
- 
- 	ret = of_get_mac_addr(np, "address", addr);
- 	if (!ret)
--		return 0;
-+		goto found;
- 
--	return of_get_mac_addr_nvmem(np, addr);
-+	ret = of_get_mac_addr_nvmem(np, addr);
-+	if (ret)
-+		return ret;
-+
-+found:
-+	ret = of_add_mac_address(np, addr);
-+	return ret;
- }
- EXPORT_SYMBOL(of_get_mac_address);
- 
diff --git a/target/linux/generic/pending-6.1/700-netfilter-nft_flow_offload-handle-netdevice-events-f.patch b/target/linux/generic/pending-6.1/700-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
deleted file mode 100644
index b335748705db..000000000000
--- a/target/linux/generic/pending-6.1/700-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Thu, 25 Jan 2018 12:58:55 +0100
-Subject: [PATCH] netfilter: nft_flow_offload: handle netdevice events from
- nf_flow_table
-
-Move the code that deals with device events to the core.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -659,6 +659,23 @@ static struct pernet_operations nf_flow_
- 	.exit_batch = nf_flow_table_pernet_exit,
- };
- 
-+static int nf_flow_table_netdev_event(struct notifier_block *this,
-+				      unsigned long event, void *ptr)
-+{
-+	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+	if (event != NETDEV_DOWN)
-+		return NOTIFY_DONE;
-+
-+	nf_flow_table_cleanup(dev);
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+	.notifier_call	= nf_flow_table_netdev_event,
-+};
-+
- static int __init nf_flow_table_module_init(void)
- {
- 	int ret;
-@@ -671,8 +688,14 @@ static int __init nf_flow_table_module_i
- 	if (ret)
- 		goto out_offload;
- 
-+	ret = register_netdevice_notifier(&flow_offload_netdev_notifier);
-+	if (ret)
-+		goto out_offload_init;
-+
- 	return 0;
- 
-+out_offload_init:
-+	nf_flow_table_offload_exit();
- out_offload:
- 	unregister_pernet_subsys(&nf_flow_table_net_ops);
- 	return ret;
-@@ -680,6 +703,7 @@ out_offload:
- 
- static void __exit nf_flow_table_module_exit(void)
- {
-+	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
- 	nf_flow_table_offload_exit();
- 	unregister_pernet_subsys(&nf_flow_table_net_ops);
- }
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -479,47 +479,14 @@ static struct nft_expr_type nft_flow_off
- 	.owner		= THIS_MODULE,
- };
- 
--static int flow_offload_netdev_event(struct notifier_block *this,
--				     unsigned long event, void *ptr)
--{
--	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
--
--	if (event != NETDEV_DOWN)
--		return NOTIFY_DONE;
--
--	nf_flow_table_cleanup(dev);
--
--	return NOTIFY_DONE;
--}
--
--static struct notifier_block flow_offload_netdev_notifier = {
--	.notifier_call	= flow_offload_netdev_event,
--};
--
- static int __init nft_flow_offload_module_init(void)
- {
--	int err;
--
--	err = register_netdevice_notifier(&flow_offload_netdev_notifier);
--	if (err)
--		goto err;
--
--	err = nft_register_expr(&nft_flow_offload_type);
--	if (err < 0)
--		goto register_expr;
--
--	return 0;
--
--register_expr:
--	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
--err:
--	return err;
-+	return nft_register_expr(&nft_flow_offload_type);
- }
- 
- static void __exit nft_flow_offload_module_exit(void)
- {
- 	nft_unregister_expr(&nft_flow_offload_type);
--	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
- }
- 
- module_init(nft_flow_offload_module_init);
diff --git a/target/linux/generic/pending-6.1/701-netfilter-nf_tables-ignore-EOPNOTSUPP-on-flowtable-d.patch b/target/linux/generic/pending-6.1/701-netfilter-nf_tables-ignore-EOPNOTSUPP-on-flowtable-d.patch
deleted file mode 100644
index 99ea09ae8f38..000000000000
--- a/target/linux/generic/pending-6.1/701-netfilter-nf_tables-ignore-EOPNOTSUPP-on-flowtable-d.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 31 Aug 2023 21:48:38 +0200
-Subject: [PATCH] netfilter: nf_tables: ignore -EOPNOTSUPP on flowtable device
- offload setup
-
-On many embedded devices, it is common to configure flowtable offloading for
-a mix of different devices, some of which have hardware offload support and
-some of which don't.
-The current code limits the ability of user space to properly set up such a
-configuration by only allowing adding devices with hardware offload support to
-a offload-enabled flowtable.
-Given that offload-enabled flowtables also imply fallback to pure software
-offloading, this limitation makes little sense.
-Fix it by not bailing out when the offload setup returns -EOPNOTSUPP
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nf_tables_api.c
-+++ b/net/netfilter/nf_tables_api.c
-@@ -8012,7 +8012,7 @@ static int nft_register_flowtable_net_ho
- 		err = flowtable->data.type->setup(&flowtable->data,
- 						  hook->ops.dev,
- 						  FLOW_BLOCK_BIND);
--		if (err < 0)
-+		if (err < 0 && err != -EOPNOTSUPP)
- 			goto err_unregister_net_hooks;
- 
- 		err = nf_register_net_hook(net, &hook->ops);
diff --git a/target/linux/generic/pending-6.1/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch b/target/linux/generic/pending-6.1/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch
deleted file mode 100644
index 90b60def6b6c..000000000000
--- a/target/linux/generic/pending-6.1/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 21 Mar 2022 20:39:59 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: enable threaded NAPI
-
-This can improve performance under load by ensuring that NAPI processing is
-not pinned on CPU 0.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4940,6 +4940,8 @@ static int mtk_probe(struct platform_dev
- 	 * for NAPI to work
- 	 */
- 	init_dummy_netdev(&eth->dummy_dev);
-+	eth->dummy_dev.threaded = 1;
-+	strcpy(eth->dummy_dev.name, "mtk_eth");
- 	netif_napi_add(&eth->dummy_dev, &eth->tx_napi, mtk_napi_tx);
- 	netif_napi_add(&eth->dummy_dev, &eth->rx_napi, mtk_napi_rx);
- 
diff --git a/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch
deleted file mode 100644
index d50bc9cd4cb6..000000000000
--- a/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: generic: add detach callback to struct phy_driver
-
-lede-commit: fe61fc2d7d0b3fb348b502f68f98243b3ddf5867
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/phy/phy_device.c | 3 +++
- include/linux/phy.h          | 6 ++++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1852,6 +1852,9 @@ void phy_detach(struct phy_device *phyde
- 	struct module *ndev_owner = NULL;
- 	struct mii_bus *bus;
- 
-+	if (phydev->drv && phydev->drv->detach)
-+		phydev->drv->detach(phydev);
-+
- 	if (phydev->sysfs_links) {
- 		if (dev)
- 			sysfs_remove_link(&dev->dev.kobj, "phydev");
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -903,6 +903,12 @@ struct phy_driver {
- 	/** @handle_interrupt: Override default interrupt handling */
- 	irqreturn_t (*handle_interrupt)(struct phy_device *phydev);
- 
-+	/*
-+	 * Called before an ethernet device is detached
-+	 * from the PHY.
-+	 */
-+	void (*detach)(struct phy_device *phydev);
-+
- 	/** @remove: Clears up any memory if needed */
- 	void (*remove)(struct phy_device *phydev);
- 
diff --git a/target/linux/generic/pending-6.1/704-netfilter-nf_tables-fix-bidirectional-offload-regres.patch b/target/linux/generic/pending-6.1/704-netfilter-nf_tables-fix-bidirectional-offload-regres.patch
deleted file mode 100644
index d1d6fa3fe1f1..000000000000
--- a/target/linux/generic/pending-6.1/704-netfilter-nf_tables-fix-bidirectional-offload-regres.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 14 Feb 2024 15:24:41 +0100
-Subject: [PATCH] netfilter: nf_tables: fix bidirectional offload regression
-
-Commit 8f84780b84d6 ("netfilter: flowtable: allow unidirectional rules")
-made unidirectional flow offload possible, while completely ignoring (and
-breaking) bidirectional flow offload for nftables.
-Add the missing flag that was left out as an exercise for the reader :)
-
-Cc: Vlad Buslov <vladbu@nvidia.com>
-Fixes: 8f84780b84d6 ("netfilter: flowtable: allow unidirectional rules")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -361,6 +361,7 @@ static void nft_flow_offload_eval(const
- 		ct->proto.tcp.seen[1].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
- 	}
- 
-+	__set_bit(NF_FLOW_HW_BIDIRECTIONAL, &flow->flags);
- 	ret = flow_offload_add(flowtable, flow);
- 	if (ret < 0)
- 		goto err_flow_add;
diff --git a/target/linux/generic/pending-6.1/705-net-dsa-tag_mtk-add-padding-for-tx-packets.patch b/target/linux/generic/pending-6.1/705-net-dsa-tag_mtk-add-padding-for-tx-packets.patch
deleted file mode 100644
index d444b2027cb4..000000000000
--- a/target/linux/generic/pending-6.1/705-net-dsa-tag_mtk-add-padding-for-tx-packets.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 6 May 2022 21:38:42 +0200
-Subject: [PATCH] net: dsa: tag_mtk: add padding for tx packets
-
-Padding for transmitted packets needs to account for the special tag.
-With not enough padding, garbage bytes are inserted by the switch at the
-end of small packets.
-
-Fixes: 5cd8985a1909 ("net-next: dsa: add Mediatek tag RX/TX handler")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/dsa/tag_mtk.c
-+++ b/net/dsa/tag_mtk.c
-@@ -27,6 +27,13 @@ static struct sk_buff *mtk_tag_xmit(stru
- 
- 	skb_set_queue_mapping(skb, dp->index);
- 
-+	/* The Ethernet switch we are interfaced with needs packets to be at
-+	 * least 64 bytes (including FCS) otherwise their padding might be
-+	 * corrupted. With tags enabled, we need to make sure that packets are
-+	 * at least 68 bytes (including FCS and tag).
-+	 */
-+	eth_skb_pad(skb);
-+
- 	/* Build the special tag after the MAC Source Address. If VLAN header
- 	 * is present, it's required that VLAN header and special tag is
- 	 * being combined. Only in this way we can allow the switch can parse
diff --git a/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch b/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
deleted file mode 100644
index 367c41bff0ea..000000000000
--- a/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 27 Aug 2021 12:22:32 +0200
-Subject: [PATCH] bridge: add knob for filtering rx/tx BPDU packets on a port
-
-Some devices (e.g. wireless APs) can't have devices behind them be part of
-a bridge topology with redundant links, due to address limitations.
-Additionally, broadcast traffic on these devices is somewhat expensive, due to
-the low data rate and wakeups of clients in powersave mode.
-This knob can be used to ensure that BPDU packets are never sent or forwarded
-to/from these devices
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/if_bridge.h
-+++ b/include/linux/if_bridge.h
-@@ -59,6 +59,7 @@ struct br_ip_list {
- #define BR_MRP_LOST_IN_CONT	BIT(19)
- #define BR_TX_FWD_OFFLOAD	BIT(20)
- #define BR_PORT_LOCKED		BIT(21)
-+#define BR_BPDU_FILTER		BIT(22)
- 
- #define BR_DEFAULT_AGEING_TIME	(300 * HZ)
- 
---- a/net/bridge/br_forward.c
-+++ b/net/bridge/br_forward.c
-@@ -199,6 +199,7 @@ out:
- void br_flood(struct net_bridge *br, struct sk_buff *skb,
- 	      enum br_pkt_type pkt_type, bool local_rcv, bool local_orig)
- {
-+	const unsigned char *dest = eth_hdr(skb)->h_dest;
- 	struct net_bridge_port *prev = NULL;
- 	struct net_bridge_port *p;
- 
-@@ -214,6 +215,10 @@ void br_flood(struct net_bridge *br, str
- 		case BR_PKT_MULTICAST:
- 			if (!(p->flags & BR_MCAST_FLOOD) && skb->dev != br->dev)
- 				continue;
-+			if ((p->flags & BR_BPDU_FILTER) &&
-+			    unlikely(is_link_local_ether_addr(dest) &&
-+				     dest[5] == 0))
-+				continue;
- 			break;
- 		case BR_PKT_BROADCAST:
- 			if (!(p->flags & BR_BCAST_FLOOD) && skb->dev != br->dev)
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -349,6 +349,8 @@ static rx_handler_result_t br_handle_fra
- 		fwd_mask |= p->group_fwd_mask;
- 		switch (dest[5]) {
- 		case 0x00:	/* Bridge Group Address */
-+			if (p->flags & BR_BPDU_FILTER)
-+				goto drop;
- 			/* If STP is turned off,
- 			   then must forward to keep loop detection */
- 			if (p->br->stp_enabled == BR_NO_STP ||
---- a/net/bridge/br_sysfs_if.c
-+++ b/net/bridge/br_sysfs_if.c
-@@ -240,6 +240,7 @@ BRPORT_ATTR_FLAG(multicast_flood, BR_MCA
- BRPORT_ATTR_FLAG(broadcast_flood, BR_BCAST_FLOOD);
- BRPORT_ATTR_FLAG(neigh_suppress, BR_NEIGH_SUPPRESS);
- BRPORT_ATTR_FLAG(isolated, BR_ISOLATED);
-+BRPORT_ATTR_FLAG(bpdu_filter, BR_BPDU_FILTER);
- 
- #ifdef CONFIG_BRIDGE_IGMP_SNOOPING
- static ssize_t show_multicast_router(struct net_bridge_port *p, char *buf)
-@@ -292,6 +293,7 @@ static const struct brport_attribute *br
- 	&brport_attr_group_fwd_mask,
- 	&brport_attr_neigh_suppress,
- 	&brport_attr_isolated,
-+	&brport_attr_bpdu_filter,
- 	&brport_attr_backup_port,
- 	NULL
- };
---- a/net/bridge/br_stp_bpdu.c
-+++ b/net/bridge/br_stp_bpdu.c
-@@ -80,7 +80,8 @@ void br_send_config_bpdu(struct net_brid
- {
- 	unsigned char buf[35];
- 
--	if (p->br->stp_enabled != BR_KERNEL_STP)
-+	if (p->br->stp_enabled != BR_KERNEL_STP ||
-+	    (p->flags & BR_BPDU_FILTER))
- 		return;
- 
- 	buf[0] = 0;
-@@ -127,7 +128,8 @@ void br_send_tcn_bpdu(struct net_bridge_
- {
- 	unsigned char buf[4];
- 
--	if (p->br->stp_enabled != BR_KERNEL_STP)
-+	if (p->br->stp_enabled != BR_KERNEL_STP ||
-+	    (p->flags & BR_BPDU_FILTER))
- 		return;
- 
- 	buf[0] = 0;
-@@ -172,6 +174,9 @@ void br_stp_rcv(const struct stp_proto *
- 	if (!(br->dev->flags & IFF_UP))
- 		goto out;
- 
-+	if (p->flags & BR_BPDU_FILTER)
-+		goto out;
-+
- 	if (p->state == BR_STATE_DISABLED)
- 		goto out;
- 
---- a/include/uapi/linux/if_link.h
-+++ b/include/uapi/linux/if_link.h
-@@ -561,6 +561,7 @@ enum {
- 	IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT,
- 	IFLA_BRPORT_MCAST_EHT_HOSTS_CNT,
- 	IFLA_BRPORT_LOCKED,
-+	IFLA_BRPORT_BPDU_FILTER,
- 	__IFLA_BRPORT_MAX
- };
- #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1)
---- a/net/bridge/br_netlink.c
-+++ b/net/bridge/br_netlink.c
-@@ -188,6 +188,7 @@ static inline size_t br_port_info_size(v
- 		+ nla_total_size(1)	/* IFLA_BRPORT_NEIGH_SUPPRESS */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_ISOLATED */
- 		+ nla_total_size(1)	/* IFLA_BRPORT_LOCKED */
-+		+ nla_total_size(1)	/* IFLA_BRPORT_BPDU_FILTER */
- 		+ nla_total_size(sizeof(struct ifla_bridge_id))	/* IFLA_BRPORT_ROOT_ID */
- 		+ nla_total_size(sizeof(struct ifla_bridge_id))	/* IFLA_BRPORT_BRIDGE_ID */
- 		+ nla_total_size(sizeof(u16))	/* IFLA_BRPORT_DESIGNATED_PORT */
-@@ -274,7 +275,8 @@ static int br_port_fill_attrs(struct sk_
- 	    nla_put_u8(skb, IFLA_BRPORT_MRP_IN_OPEN,
- 		       !!(p->flags & BR_MRP_LOST_IN_CONT)) ||
- 	    nla_put_u8(skb, IFLA_BRPORT_ISOLATED, !!(p->flags & BR_ISOLATED)) ||
--	    nla_put_u8(skb, IFLA_BRPORT_LOCKED, !!(p->flags & BR_PORT_LOCKED)))
-+	    nla_put_u8(skb, IFLA_BRPORT_LOCKED, !!(p->flags & BR_PORT_LOCKED)) ||
-+	    nla_put_u8(skb, IFLA_BRPORT_BPDU_FILTER, !!(p->flags & BR_BPDU_FILTER)))
- 		return -EMSGSIZE;
- 
- 	timerval = br_timer_value(&p->message_age_timer);
-@@ -879,6 +881,7 @@ static const struct nla_policy br_port_p
- 	[IFLA_BRPORT_LOCKED] = { .type = NLA_U8 },
- 	[IFLA_BRPORT_BACKUP_PORT] = { .type = NLA_U32 },
- 	[IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT] = { .type = NLA_U32 },
-+	[IFLA_BRPORT_BPDU_FILTER] = { .type = NLA_U8 },
- };
- 
- /* Change the state of the port and notify spanning tree */
-@@ -944,6 +947,7 @@ static int br_setport(struct net_bridge_
- 	br_set_port_flag(p, tb, IFLA_BRPORT_NEIGH_SUPPRESS, BR_NEIGH_SUPPRESS);
- 	br_set_port_flag(p, tb, IFLA_BRPORT_ISOLATED, BR_ISOLATED);
- 	br_set_port_flag(p, tb, IFLA_BRPORT_LOCKED, BR_PORT_LOCKED);
-+	br_set_port_flag(p, tb, IFLA_BRPORT_BPDU_FILTER, BR_BPDU_FILTER);
- 
- 	changed_mask = old_flags ^ p->flags;
- 
---- a/net/core/rtnetlink.c
-+++ b/net/core/rtnetlink.c
-@@ -57,7 +57,7 @@
- #include "dev.h"
- 
- #define RTNL_MAX_TYPE		50
--#define RTNL_SLAVE_MAX_TYPE	40
-+#define RTNL_SLAVE_MAX_TYPE	41
- 
- struct rtnl_link {
- 	rtnl_doit_func		doit;
-@@ -4840,7 +4840,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu
- 	    brport_nla_put_flag(skb, flags, mask,
- 				IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD) ||
- 	    brport_nla_put_flag(skb, flags, mask,
--				IFLA_BRPORT_BCAST_FLOOD, BR_BCAST_FLOOD)) {
-+				IFLA_BRPORT_BCAST_FLOOD, BR_BCAST_FLOOD) ||
-+	    brport_nla_put_flag(skb, flags, mask,
-+				IFLA_BRPORT_BPDU_FILTER, BR_BPDU_FILTER)) {
- 		nla_nest_cancel(skb, protinfo);
- 		goto nla_put_failure;
- 	}
diff --git a/target/linux/generic/pending-6.1/711-01-net-dsa-qca8k-implement-lag_fdb_add-del-ops.patch b/target/linux/generic/pending-6.1/711-01-net-dsa-qca8k-implement-lag_fdb_add-del-ops.patch
deleted file mode 100644
index 629b141572db..000000000000
--- a/target/linux/generic/pending-6.1/711-01-net-dsa-qca8k-implement-lag_fdb_add-del-ops.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 3b4329230db8750bea7a56ef07f07cbbf5fc6c5a Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 4 Jul 2023 22:50:12 +0200
-Subject: [PATCH 19/20] net: dsa: qca8k: implement lag_fdb_add/del ops
-
-Implement lag_fdb_add/del ops to correctly support using LAG interface.
-Qca8k switch supports declaring fdb entry for link aggregation by simply
-setting the DES_PORT bits to all the LAG member.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/net/dsa/qca/qca8k-8xxx.c   |  2 ++
- drivers/net/dsa/qca/qca8k-common.c | 48 ++++++++++++++++++++++++++++++
- drivers/net/dsa/qca/qca8k.h        |  6 ++++
- 3 files changed, 56 insertions(+)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -2015,6 +2015,8 @@ static const struct dsa_switch_ops qca8k
- 	.port_fdb_add		= qca8k_port_fdb_add,
- 	.port_fdb_del		= qca8k_port_fdb_del,
- 	.port_fdb_dump		= qca8k_port_fdb_dump,
-+	.lag_fdb_add		= qca8k_lag_fdb_add,
-+	.lag_fdb_del		= qca8k_lag_fdb_del,
- 	.port_mdb_add		= qca8k_port_mdb_add,
- 	.port_mdb_del		= qca8k_port_mdb_del,
- 	.port_mirror_add	= qca8k_port_mirror_add,
---- a/drivers/net/dsa/qca/qca8k-common.c
-+++ b/drivers/net/dsa/qca/qca8k-common.c
-@@ -1215,6 +1215,42 @@ int qca8k_port_lag_leave(struct dsa_swit
- 	return qca8k_lag_refresh_portmap(ds, port, lag, true);
- }
- 
-+int qca8k_lag_fdb_add(struct dsa_switch *ds, struct dsa_lag lag,
-+		      const unsigned char *addr, u16 vid,
-+		      struct dsa_db db)
-+{
-+	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-+	struct dsa_port *dp;
-+	u16 port_mask = 0;
-+
-+	/* Set the vid to the port vlan id if no vid is set */
-+	if (!vid)
-+		vid = QCA8K_PORT_VID_DEF;
-+
-+	dsa_lag_foreach_port(dp, ds->dst, &lag)
-+		port_mask |= BIT(dp->index);
-+
-+	return qca8k_port_fdb_insert(priv, addr, port_mask, vid);
-+}
-+
-+int qca8k_lag_fdb_del(struct dsa_switch *ds, struct dsa_lag lag,
-+		      const unsigned char *addr, u16 vid,
-+		      struct dsa_db db)
-+{
-+	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-+	struct dsa_port *dp;
-+	u16 port_mask = 0;
-+
-+	/* Set the vid to the port vlan id if no vid is set */
-+	if (!vid)
-+		vid = QCA8K_PORT_VID_DEF;
-+
-+	dsa_lag_foreach_port(dp, ds->dst, &lag)
-+	port_mask |= BIT(dp->index);
-+
-+	return qca8k_fdb_del(priv, addr, port_mask, vid);
-+}
-+
- int qca8k_read_switch_id(struct qca8k_priv *priv)
- {
- 	u32 val;
---- a/drivers/net/dsa/qca/qca8k.h
-+++ b/drivers/net/dsa/qca/qca8k.h
-@@ -590,5 +590,11 @@ int qca8k_port_lag_join(struct dsa_switc
- 			struct netlink_ext_ack *extack);
- int qca8k_port_lag_leave(struct dsa_switch *ds, int port,
- 			 struct dsa_lag lag);
-+int qca8k_lag_fdb_add(struct dsa_switch *ds, struct dsa_lag lag,
-+		      const unsigned char *addr, u16 vid,
-+		      struct dsa_db db);
-+int qca8k_lag_fdb_del(struct dsa_switch *ds, struct dsa_lag lag,
-+		      const unsigned char *addr, u16 vid,
-+		      struct dsa_db db);
- 
- #endif /* __QCA8K_H */
diff --git a/target/linux/generic/pending-6.1/711-02-net-dsa-qca8k-enable-flooding-to-both-CPU-port.patch b/target/linux/generic/pending-6.1/711-02-net-dsa-qca8k-enable-flooding-to-both-CPU-port.patch
deleted file mode 100644
index 24243468a8fa..000000000000
--- a/target/linux/generic/pending-6.1/711-02-net-dsa-qca8k-enable-flooding-to-both-CPU-port.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From b954d61d9ecfa64450fc178586719dc2a95b92a7 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 20 Jun 2023 21:48:24 +0200
-Subject: [PATCH 3/4] net: dsa: qca8k: enable flooding to both CPU port
-
-To permit a multi-CPU setup, flood all unknown frames to all CPU ports.
-Each CPU port should have correct LOOKUP MEMBER configuration to
-prevent receiving duplicate packets from user ports.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 13 +++++--------
- 1 file changed, 5 insertions(+), 8 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -1904,15 +1904,12 @@ qca8k_setup(struct dsa_switch *ds)
- 		}
- 	}
- 
--	/* Forward all unknown frames to CPU port for Linux processing
--	 * Notice that in multi-cpu config only one port should be set
--	 * for igmp, unknown, multicast and broadcast packet
--	 */
-+	/* Forward all unknown frames to CPU port for Linux processing */
- 	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
--			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) |
--			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) |
--			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) |
--			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port)));
-+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, dsa_cpu_ports(ds)) |
-+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, dsa_cpu_ports(ds)) |
-+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, dsa_cpu_ports(ds)) |
-+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, dsa_cpu_ports(ds)));
- 	if (ret)
- 		return ret;
- 
diff --git a/target/linux/generic/pending-6.1/711-03-net-dsa-qca8k-add-support-for-port_change_master.patch b/target/linux/generic/pending-6.1/711-03-net-dsa-qca8k-add-support-for-port_change_master.patch
deleted file mode 100644
index 8a58e0f76e0e..000000000000
--- a/target/linux/generic/pending-6.1/711-03-net-dsa-qca8k-add-support-for-port_change_master.patch
+++ /dev/null
@@ -1,158 +0,0 @@
-From b2d6ebf2f92f8695c83fa6979f4ab579c588df76 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Tue, 20 Jun 2023 07:57:38 +0200
-Subject: [PATCH 4/4] net: dsa: qca8k: add support for port_change_master
-
-Add support for port_change_master to permit assigning an alternative
-CPU port if the switch have both CPU port connected or create a LAG on
-both CPU port and assign the LAG as DSA master.
-
-On port change master request, we check if the master is a LAG.
-With LAG we compose the cpu_port_mask with the CPU port in the LAG, if
-master is a simple dsa_port, we derive the index.
-
-Finally we apply the new cpu_port_mask to the LOOKUP MEMBER to permit
-the port to receive packet by the new CPU port setup for the port and we
-refresh the CPU ports LOOKUP MEMBER configuration to reflect the new
-user port state.
-
-port_lag_join/leave is updated to refresh the user ports if we detect
-that the LAG is a DSA master and we have user port using it as a master.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 116 ++++++++++++++++++++++++++++++-
- 1 file changed, 114 insertions(+), 2 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -1741,6 +1741,117 @@ qca8k_get_tag_protocol(struct dsa_switch
- 	return DSA_TAG_PROTO_QCA;
- }
- 
-+static int qca8k_port_change_master(struct dsa_switch *ds, int port,
-+				    struct net_device *master,
-+				    struct netlink_ext_ack *extack)
-+{
-+	struct dsa_switch_tree *dst = ds->dst;
-+	struct qca8k_priv *priv = ds->priv;
-+	u8 cpu_port_mask = 0;
-+	struct dsa_port *dp;
-+	u32 val;
-+	int ret;
-+
-+	/* With LAG of CPU port, compose the mask for port LOOKUP MEMBER */
-+	if (netif_is_lag_master(master)) {
-+		struct dsa_lag *lag;
-+		int id;
-+
-+		id = dsa_lag_id(dst, master);
-+		lag = dsa_lag_by_id(dst, id);
-+
-+		dsa_lag_foreach_port(dp, dst, lag)
-+			if (dsa_port_is_cpu(dp))
-+				cpu_port_mask |= BIT(dp->index);
-+	} else {
-+		dp = master->dsa_ptr;
-+		cpu_port_mask |= BIT(dp->index);
-+	}
-+
-+	/* Connect port to new cpu port */
-+	ret = regmap_read(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port), &val);
-+	if (ret)
-+		return ret;
-+
-+	/* Reset connected CPU port in port LOOKUP MEMBER */
-+	val &=  ~dsa_cpu_ports(ds);
-+	/* Assign the new CPU port in port LOOKUP MEMBER */
-+	val |= cpu_port_mask;
-+
-+	ret = regmap_update_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port),
-+				 QCA8K_PORT_LOOKUP_MEMBER,
-+				 val);
-+	if (ret)
-+		return ret;
-+
-+	/* Refresh CPU port LOOKUP MEMBER with new port */
-+	dsa_tree_for_each_cpu_port(dp, ds->dst) {
-+		u32 reg = QCA8K_PORT_LOOKUP_CTRL(dp->index);
-+
-+		/* If CPU port in mask assign port, else remove port */
-+		if (BIT(dp->index) & cpu_port_mask)
-+			ret = regmap_set_bits(priv->regmap, reg, BIT(port));
-+		else
-+			ret = regmap_clear_bits(priv->regmap, reg, BIT(port));
-+
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int qca8k_port_lag_refresh_user_ports(struct dsa_switch *ds,
-+					     struct dsa_lag lag)
-+{
-+	struct net_device *lag_dev = lag.dev;
-+	struct dsa_port *dp;
-+	int ret;
-+
-+	/* Ignore if LAG is not a DSA master */
-+	if (!netif_is_lag_master(lag_dev))
-+		return 0;
-+
-+	dsa_switch_for_each_user_port(dp, ds) {
-+		/* Skip if assigned master is not the LAG */
-+		if (dsa_port_to_master(dp) != lag_dev)
-+			continue;
-+
-+		ret = qca8k_port_change_master(ds, dp->index,
-+					       lag_dev, NULL);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static int qca8xxx_port_lag_join(struct dsa_switch *ds, int port,
-+				 struct dsa_lag lag,
-+				 struct netdev_lag_upper_info *info,
-+				 struct netlink_ext_ack *extack)
-+{
-+	int ret;
-+
-+	ret = qca8k_port_lag_join(ds, port, lag, info, extack);
-+	if (ret)
-+		return ret;
-+
-+	return qca8k_port_lag_refresh_user_ports(ds, lag);
-+}
-+
-+static int qca8xxx_port_lag_leave(struct dsa_switch *ds, int port,
-+				  struct dsa_lag lag)
-+{
-+	int ret;
-+
-+	ret = qca8k_port_lag_leave(ds, port, lag);
-+	if (ret)
-+		return ret;
-+
-+	return qca8k_port_lag_refresh_user_ports(ds, lag);
-+}
-+
- static void
- qca8k_master_change(struct dsa_switch *ds, const struct net_device *master,
- 		    bool operational)
-@@ -2027,8 +2138,9 @@ static const struct dsa_switch_ops qca8k
- 	.phylink_mac_link_down	= qca8k_phylink_mac_link_down,
- 	.phylink_mac_link_up	= qca8k_phylink_mac_link_up,
- 	.get_phy_flags		= qca8k_get_phy_flags,
--	.port_lag_join		= qca8k_port_lag_join,
--	.port_lag_leave		= qca8k_port_lag_leave,
-+	.port_lag_join		= qca8xxx_port_lag_join,
-+	.port_lag_leave		= qca8xxx_port_lag_leave,
-+	.port_change_master	= qca8k_port_change_master,
- 	.master_state_change	= qca8k_master_change,
- 	.connect_tag_protocol	= qca8k_connect_tag_protocol,
- };
diff --git a/target/linux/generic/pending-6.1/712-net-dsa-qca8k-enable-assisted-learning-on-CPU-port.patch b/target/linux/generic/pending-6.1/712-net-dsa-qca8k-enable-assisted-learning-on-CPU-port.patch
deleted file mode 100644
index 23816fe3660c..000000000000
--- a/target/linux/generic/pending-6.1/712-net-dsa-qca8k-enable-assisted-learning-on-CPU-port.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 0f6599167c126ce32c85d4f8a1f3d1775a268572 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Fri, 6 Oct 2023 12:44:00 +0200
-Subject: [PATCH] net: dsa: qca8k: enable assisted learning on CPU port
-
-Enable assisted learning on CPU port.
-
-It has been verified that there is a problem in packet roaming
-from one BSS to another in the same security settings from one
-physical R7800 to another physical R7800 where they are in the
-same L2 broadcast domain backhauled/linked together via one
-of the ethernet ports.
-DHCP will fail to complete and traffic cannot flow for around 300
-seconds.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/net/dsa/qca/qca8k-8xxx.c | 14 +++++++++-----
- 1 file changed, 9 insertions(+), 5 deletions(-)
-
---- a/drivers/net/dsa/qca/qca8k-8xxx.c
-+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
-@@ -2013,6 +2013,12 @@ qca8k_setup(struct dsa_switch *ds)
- 			dev_err(priv->dev, "failed enabling QCA header mode on port %d", dp->index);
- 			return ret;
- 		}
-+
-+		/* Disable learning by default on all ports */
-+		ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(dp->index),
-+								QCA8K_PORT_LOOKUP_LEARN);
-+		if (ret)
-+			return ret;
- 	}
- 
- 	/* Forward all unknown frames to CPU port for Linux processing */
-@@ -2042,11 +2048,6 @@ qca8k_setup(struct dsa_switch *ds)
- 		if (ret)
- 			return ret;
- 
--		ret = regmap_clear_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(port),
--					QCA8K_PORT_LOOKUP_LEARN);
--		if (ret)
--			return ret;
--
- 		/* For port based vlans to work we need to set the
- 		 * default egress vid
- 		 */
-@@ -2098,6 +2099,9 @@ qca8k_setup(struct dsa_switch *ds)
- 	/* Set max number of LAGs supported */
- 	ds->num_lag_ids = QCA8K_NUM_LAGS;
- 
-+	/* HW learn on CPU port is limited and require manual setting */
-+	ds->assisted_learning_on_cpu_port = true;
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/pending-6.1/713-03-arm64-dts-qcom-ipq8074-add-clock-frequency-to-MDIO-n.patch b/target/linux/generic/pending-6.1/713-03-arm64-dts-qcom-ipq8074-add-clock-frequency-to-MDIO-n.patch
deleted file mode 100644
index 55f116ec5f2c..000000000000
--- a/target/linux/generic/pending-6.1/713-03-arm64-dts-qcom-ipq8074-add-clock-frequency-to-MDIO-n.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 3b5a603bf66236b956287909556fd7ad4904450c Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Wed, 24 Jan 2024 19:38:01 +0100
-Subject: [PATCH 3/3] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO
- node
-
-Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead
-of using the default value of 390KHz from MDIO default divider.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
-@@ -263,6 +263,8 @@
- 			clocks = <&gcc GCC_MDIO_AHB_CLK>;
- 			clock-names = "gcc_mdio_ahb_clk";
- 
-+			clock-frequency = <6250000>;
-+
- 			status = "disabled";
- 		};
- 
diff --git a/target/linux/generic/pending-6.1/721-net-phy-realtek-rtl8221-allow-to-configure-SERDES-mo.patch b/target/linux/generic/pending-6.1/721-net-phy-realtek-rtl8221-allow-to-configure-SERDES-mo.patch
deleted file mode 100644
index ed13b004e4ec..000000000000
--- a/target/linux/generic/pending-6.1/721-net-phy-realtek-rtl8221-allow-to-configure-SERDES-mo.patch
+++ /dev/null
@@ -1,106 +0,0 @@
-From ace6abaa0f9203083fe4c0a6a74da2d96410b625 Mon Sep 17 00:00:00 2001
-From: Alexander Couzens <lynxis@fe80.eu>
-Date: Sat, 13 Aug 2022 12:49:33 +0200
-Subject: [PATCH 01/10] net: phy: realtek: rtl8221: allow to configure SERDES
- mode
-
-The rtl8221 supports multiple SERDES modes:
-- SGMII
-- 2500base-x
-- HiSGMII
-
-Further it supports rate adaption on SERDES links to allow
-slow ethernet speeds (10/100/1000mbit) to work on 2500base-x/HiSGMII
-links without reducing the SERDES speed.
-
-When operating without rate adapters the SERDES link will follow the
-ethernet speed.
-
-Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
----
- drivers/net/phy/realtek.c | 48 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 48 insertions(+)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -53,6 +53,15 @@
- 						 RTL8201F_ISR_LINK)
- #define RTL8201F_IER				0x13
- 
-+#define RTL8221B_MMD_SERDES_CTRL		MDIO_MMD_VEND1
-+#define RTL8221B_MMD_PHY_CTRL			MDIO_MMD_VEND2
-+#define RTL8221B_SERDES_OPTION			0x697a
-+#define RTL8221B_SERDES_OPTION_MODE_MASK	GENMASK(5, 0)
-+#define RTL8221B_SERDES_OPTION_MODE_2500BASEX_SGMII	0
-+#define RTL8221B_SERDES_OPTION_MODE_HISGMII_SGMII	1
-+#define RTL8221B_SERDES_OPTION_MODE_2500BASEX		2
-+#define RTL8221B_SERDES_OPTION_MODE_HISGMII		3
-+
- #define RTL8366RB_POWER_SAVE			0x15
- #define RTL8366RB_POWER_SAVE_ON			BIT(12)
- 
-@@ -851,6 +860,48 @@ static irqreturn_t rtl9000a_handle_inter
- 	return IRQ_HANDLED;
- }
- 
-+static int rtl8221b_config_init(struct phy_device *phydev)
-+{
-+	u16 option_mode;
-+
-+	switch (phydev->interface) {
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+		if (!phydev->is_c45) {
-+			option_mode = RTL8221B_SERDES_OPTION_MODE_2500BASEX;
-+			break;
-+		}
-+		fallthrough;
-+	case PHY_INTERFACE_MODE_SGMII:
-+		option_mode = RTL8221B_SERDES_OPTION_MODE_2500BASEX_SGMII;
-+		break;
-+	default:
-+		return 0;
-+	}
-+
-+	phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL,
-+		      0x75f3, 0);
-+
-+	phy_modify_mmd_changed(phydev, RTL8221B_MMD_SERDES_CTRL,
-+			       RTL8221B_SERDES_OPTION,
-+			       RTL8221B_SERDES_OPTION_MODE_MASK, option_mode);
-+	switch (option_mode) {
-+	case RTL8221B_SERDES_OPTION_MODE_2500BASEX_SGMII:
-+	case RTL8221B_SERDES_OPTION_MODE_2500BASEX:
-+		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6a04, 0x0503);
-+		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f10, 0xd455);
-+		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f11, 0x8020);
-+		break;
-+	case RTL8221B_SERDES_OPTION_MODE_HISGMII_SGMII:
-+	case RTL8221B_SERDES_OPTION_MODE_HISGMII:
-+		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6a04, 0x0503);
-+		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f10, 0xd433);
-+		phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x6f11, 0x8020);
-+		break;
-+	}
-+
-+	return 0;
-+}
-+
- static struct phy_driver realtek_drvs[] = {
- 	{
- 		PHY_ID_MATCH_EXACT(0x00008201),
-@@ -1003,6 +1054,7 @@ static struct phy_driver realtek_drvs[]
- 		PHY_ID_MATCH_EXACT(0x001cc849),
- 		.name           = "RTL8221B-VB-CG 2.5Gbps PHY",
- 		.get_features   = rtl822x_get_features,
-+		.config_init    = rtl8221b_config_init,
- 		.config_aneg    = rtl822x_config_aneg,
- 		.read_status    = rtl822x_read_status,
- 		.suspend        = genphy_suspend,
-@@ -1014,6 +1066,7 @@ static struct phy_driver realtek_drvs[]
- 		.name           = "RTL8221B-VM-CG 2.5Gbps PHY",
- 		.get_features   = rtl822x_get_features,
- 		.config_aneg    = rtl822x_config_aneg,
-+		.config_init    = rtl8221b_config_init,
- 		.read_status    = rtl822x_read_status,
- 		.suspend        = genphy_suspend,
- 		.resume         = rtlgen_resume,
diff --git a/target/linux/generic/pending-6.1/722-net-phy-realtek-support-switching-between-SGMII-and-.patch b/target/linux/generic/pending-6.1/722-net-phy-realtek-support-switching-between-SGMII-and-.patch
deleted file mode 100644
index abe31e66afe9..000000000000
--- a/target/linux/generic/pending-6.1/722-net-phy-realtek-support-switching-between-SGMII-and-.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 312753d0aadba0f58841ae513b80fdbabc887523 Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Wed, 8 Feb 2023 16:32:18 +0800
-Subject: [PATCH] net: phy: realtek: support switching between SGMII and
- 2500BASE-X for RTL822x series
-
-After commit ace6aba ("net: phy: realtek: rtl8221: allow to configure
-SERDES mode"), the rtl8221 phy can work in SGMII and 2500base-x modes
-respectively. So add interface automatic switching for rtl8221 phy to
-match various wire speeds.
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
----
- drivers/net/phy/realtek.c | 26 ++++++++++++++++++++++++--
- 1 file changed, 24 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -686,6 +686,25 @@ static int rtl822x_config_aneg(struct ph
- 	return __genphy_config_aneg(phydev, ret);
- }
- 
-+static void rtl822x_update_interface(struct phy_device *phydev)
-+{
-+	/* Automatically switch SERDES interface between
-+	 * SGMII and 2500-BaseX according to speed.
-+	 */
-+	switch (phydev->speed) {
-+	case SPEED_2500:
-+		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-+		break;
-+	case SPEED_1000:
-+	case SPEED_100:
-+	case SPEED_10:
-+		phydev->interface = PHY_INTERFACE_MODE_SGMII;
-+		break;
-+	default:
-+		break;
-+	}
-+}
-+
- static int rtl822x_read_status(struct phy_device *phydev)
- {
- 	int ret;
-@@ -704,11 +723,14 @@ static int rtl822x_read_status(struct ph
- 			phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
- 	}
- 
--	ret = genphy_read_status(phydev);
-+	ret = rtlgen_read_status(phydev);
- 	if (ret < 0)
- 		return ret;
- 
--	return rtlgen_get_speed(phydev);
-+	if (phydev->is_c45 && phydev->link)
-+		rtl822x_update_interface(phydev);
-+
-+	return 0;
- }
- 
- static bool rtlgen_supports_2_5gbps(struct phy_device *phydev)
diff --git a/target/linux/generic/pending-6.1/724-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch b/target/linux/generic/pending-6.1/724-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch
deleted file mode 100644
index 8e0e4b1fdd43..000000000000
--- a/target/linux/generic/pending-6.1/724-net-phy-realtek-use-genphy_soft_reset-for-2.5G-PHYs.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 85cd45580f5e3b26068cccb7d6173f200e754dc0 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 2 Apr 2023 23:56:16 +0100
-Subject: [PATCH 1/2] net: phy: realtek: use genphy_soft_reset for 2.5G PHYs
-
-Some vendor bootloaders do weird things with those PHYs which result in
-link modes being reported wrongly. Start from a clean sheet by resetting
-the PHY.
-
-Reported-by: Yevhen Kolomeiko <jarvis2709@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/realtek.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -1040,6 +1040,7 @@ static struct phy_driver realtek_drvs[]
- 		.write_page	= rtl821x_write_page,
- 		.read_mmd	= rtl822x_read_mmd,
- 		.write_mmd	= rtl822x_write_mmd,
-+		.soft_reset     = genphy_soft_reset,
- 	}, {
- 		PHY_ID_MATCH_EXACT(0x001cc840),
- 		.name		= "RTL8226B_RTL8221B 2.5Gbps PHY",
-@@ -1052,6 +1053,7 @@ static struct phy_driver realtek_drvs[]
- 		.write_page	= rtl821x_write_page,
- 		.read_mmd	= rtl822x_read_mmd,
- 		.write_mmd	= rtl822x_write_mmd,
-+		.soft_reset     = genphy_soft_reset,
- 	}, {
- 		PHY_ID_MATCH_EXACT(0x001cc838),
- 		.name           = "RTL8226-CG 2.5Gbps PHY",
-@@ -1062,6 +1064,7 @@ static struct phy_driver realtek_drvs[]
- 		.resume         = rtlgen_resume,
- 		.read_page      = rtl821x_read_page,
- 		.write_page     = rtl821x_write_page,
-+		.soft_reset     = genphy_soft_reset,
- 	}, {
- 		PHY_ID_MATCH_EXACT(0x001cc848),
- 		.name           = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
-@@ -1072,6 +1075,7 @@ static struct phy_driver realtek_drvs[]
- 		.resume         = rtlgen_resume,
- 		.read_page      = rtl821x_read_page,
- 		.write_page     = rtl821x_write_page,
-+		.soft_reset     = genphy_soft_reset,
- 	}, {
- 		PHY_ID_MATCH_EXACT(0x001cc849),
- 		.name           = "RTL8221B-VB-CG 2.5Gbps PHY",
-@@ -1083,6 +1087,7 @@ static struct phy_driver realtek_drvs[]
- 		.resume         = rtlgen_resume,
- 		.read_page      = rtl821x_read_page,
- 		.write_page     = rtl821x_write_page,
-+		.soft_reset     = genphy_soft_reset,
- 	}, {
- 		PHY_ID_MATCH_EXACT(0x001cc84a),
- 		.name           = "RTL8221B-VM-CG 2.5Gbps PHY",
-@@ -1094,6 +1099,7 @@ static struct phy_driver realtek_drvs[]
- 		.resume         = rtlgen_resume,
- 		.read_page      = rtl821x_read_page,
- 		.write_page     = rtl821x_write_page,
-+		.soft_reset     = genphy_soft_reset,
- 	}, {
- 		PHY_ID_MATCH_EXACT(0x001cc961),
- 		.name		= "RTL8366RB Gigabit Ethernet",
diff --git a/target/linux/generic/pending-6.1/725-net-phy-realtek-disable-SGMII-in-band-AN-for-2-5G-PHYs.patch b/target/linux/generic/pending-6.1/725-net-phy-realtek-disable-SGMII-in-band-AN-for-2-5G-PHYs.patch
deleted file mode 100644
index babaa47aedcd..000000000000
--- a/target/linux/generic/pending-6.1/725-net-phy-realtek-disable-SGMII-in-band-AN-for-2-5G-PHYs.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 2b1b8c4c215af7988136401c902338d091d408a1 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 3 Apr 2023 01:21:57 +0300
-Subject: [PATCH 2/2] net: phy: realtek: disable SGMII in-band AN for 2.5G PHYs
-
-MAC drivers don't use SGMII in-band autonegotiation unless told to do so
-in device tree using 'managed = "in-band-status"'. When using MDIO to
-access a PHY, in-band-status is unneeded as we have link-status via
-MDIO. Switch off SGMII in-band autonegotiation using magic values.
-
-Reported-by: Chen Minqiang <ptpt52@gmail.com>
-Reported-by: Chukun Pan <amadeus@jmu.edu.cn>
-Reported-by: Yevhen Kolomeiko <jarvis2709@gmail.com>
-Tested-by: Yevhen Kolomeiko <jarvis2709@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/realtek.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -885,6 +885,7 @@ static irqreturn_t rtl9000a_handle_inter
- static int rtl8221b_config_init(struct phy_device *phydev)
- {
- 	u16 option_mode;
-+	int val;
- 
- 	switch (phydev->interface) {
- 	case PHY_INTERFACE_MODE_2500BASEX:
-@@ -921,6 +922,13 @@ static int rtl8221b_config_init(struct p
- 		break;
- 	}
- 
-+	/* Disable SGMII AN */
-+	phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x7588, 0x2);
-+	phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x7589, 0x71d0);
-+	phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, 0x7587, 0x3);
-+	phy_read_mmd_poll_timeout(phydev, RTL8221B_MMD_SERDES_CTRL, 0x7587,
-+				  val, !(val & BIT(0)), 500, 100000, false);
-+
- 	return 0;
- }
- 
diff --git a/target/linux/generic/pending-6.1/726-net-phy-realtek-make-sure-paged-read-is-protected-by.patch b/target/linux/generic/pending-6.1/726-net-phy-realtek-make-sure-paged-read-is-protected-by.patch
deleted file mode 100644
index 6e338d94741e..000000000000
--- a/target/linux/generic/pending-6.1/726-net-phy-realtek-make-sure-paged-read-is-protected-by.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 4dd2cc9b91ecb25f278a2c55e07e6455e9000e6b Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sat, 22 Apr 2023 01:21:14 +0100
-Subject: [PATCH] net: phy: realtek: make sure paged read is protected by mutex
-
-As we cannot rely on phy_read_paged function before the PHY is
-identified, the paged read in rtlgen_supports_2_5gbps needs to be open
-coded as it is being called by the match_phy_device function, ie. before
-.read_page and .write_page have been populated.
-
-Make sure it is also protected by the MDIO bus mutex and use
-rtl821x_write_page instead of 3 individually locked MDIO bus operations.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/realtek.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -737,9 +737,11 @@ static bool rtlgen_supports_2_5gbps(stru
- {
- 	int val;
- 
--	phy_write(phydev, RTL821x_PAGE_SELECT, 0xa61);
--	val = phy_read(phydev, 0x13);
--	phy_write(phydev, RTL821x_PAGE_SELECT, 0);
-+	mutex_lock(&phydev->mdio.bus->mdio_lock);
-+	rtl821x_write_page(phydev, 0xa61);
-+	val = __phy_read(phydev, 0x13);
-+	rtl821x_write_page(phydev, 0);
-+	mutex_unlock(&phydev->mdio.bus->mdio_lock);
- 
- 	return val >= 0 && val & RTL_SUPPORTS_2500FULL;
- }
diff --git a/target/linux/generic/pending-6.1/727-net-phy-realtek-use-inline-functions-for-10GbE-adver.patch b/target/linux/generic/pending-6.1/727-net-phy-realtek-use-inline-functions-for-10GbE-adver.patch
deleted file mode 100644
index cafaefd3bf9b..000000000000
--- a/target/linux/generic/pending-6.1/727-net-phy-realtek-use-inline-functions-for-10GbE-adver.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 92c8b9d558160d94b981dd8a2b9c47657627ffdc Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sat, 22 Apr 2023 01:23:08 +0100
-Subject: [PATCH 2/3] net: phy: realtek: use inline functions for 10GbE
- advertisement
-
-Use existing generic inline functions to encode local advertisement
-of 10GbE link modes as well as to decode link-partner advertisement.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/realtek.c | 22 +++++-----------------
- 1 file changed, 5 insertions(+), 17 deletions(-)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -68,10 +68,6 @@
- #define RTL_SUPPORTS_5000FULL			BIT(14)
- #define RTL_SUPPORTS_2500FULL			BIT(13)
- #define RTL_SUPPORTS_10000FULL			BIT(0)
--#define RTL_ADV_2500FULL			BIT(7)
--#define RTL_LPADV_10000FULL			BIT(11)
--#define RTL_LPADV_5000FULL			BIT(6)
--#define RTL_LPADV_2500FULL			BIT(5)
- 
- #define RTL9000A_GINMR				0x14
- #define RTL9000A_GINMR_LINK_STATUS		BIT(4)
-@@ -671,14 +667,11 @@ static int rtl822x_config_aneg(struct ph
- 	int ret = 0;
- 
- 	if (phydev->autoneg == AUTONEG_ENABLE) {
--		u16 adv2500 = 0;
--
--		if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
--				      phydev->advertising))
--			adv2500 = RTL_ADV_2500FULL;
--
- 		ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
--					       RTL_ADV_2500FULL, adv2500);
-+					       MDIO_AN_10GBT_CTRL_ADV10G |
-+					       MDIO_AN_10GBT_CTRL_ADV5G |
-+					       MDIO_AN_10GBT_CTRL_ADV2_5G,
-+			linkmode_adv_to_mii_10gbt_adv_t(phydev->advertising));
- 		if (ret < 0)
- 			return ret;
- 	}
-@@ -715,12 +708,7 @@ static int rtl822x_read_status(struct ph
- 		if (lpadv < 0)
- 			return lpadv;
- 
--		linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
--			phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL);
--		linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
--			phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL);
--		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
--			phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL);
-+		mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, lpadv);
- 	}
- 
- 	ret = rtlgen_read_status(phydev);
diff --git a/target/linux/generic/pending-6.1/728-net-phy-realtek-check-validity-of-10GbE-link-partner.patch b/target/linux/generic/pending-6.1/728-net-phy-realtek-check-validity-of-10GbE-link-partner.patch
deleted file mode 100644
index 8be1af6e505d..000000000000
--- a/target/linux/generic/pending-6.1/728-net-phy-realtek-check-validity-of-10GbE-link-partner.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 929bb4d3cfbc7878326c0771a01a636d49c54b40 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sat, 22 Apr 2023 01:25:39 +0100
-Subject: [PATCH 3/3] net: phy: realtek: check validity of 10GbE link-partner
- advertisement
-
-Only use link-partner advertisement bits for 10GbE modes if they are
-actually valid. Check LOCALOK and REMOTEOK bits and clear 10GbE modes
-unless both of them are set.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/realtek.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -708,6 +708,10 @@ static int rtl822x_read_status(struct ph
- 		if (lpadv < 0)
- 			return lpadv;
- 
-+		if (!(lpadv & MDIO_AN_10GBT_STAT_REMOK) ||
-+		    !(lpadv & MDIO_AN_10GBT_STAT_LOCOK))
-+			lpadv = 0;
-+
- 		mii_10gbt_stat_mod_linkmode_lpa_t(phydev->lp_advertising, lpadv);
- 	}
- 
diff --git a/target/linux/generic/pending-6.1/729-net-phy-realtek-introduce-rtl822x_probe.patch b/target/linux/generic/pending-6.1/729-net-phy-realtek-introduce-rtl822x_probe.patch
deleted file mode 100644
index 92e7a8742af7..000000000000
--- a/target/linux/generic/pending-6.1/729-net-phy-realtek-introduce-rtl822x_probe.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 9155098547fb1172d4fa536f3f6bc9d42f59d08c Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sat, 22 Apr 2023 03:26:01 +0100
-Subject: [PATCH] net: phy: realtek: setup ALDPS on RTL822x
-
-Setup Link Down Power Saving Mode according the DTS property
-just like for RTL821x 1GE PHYs.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/phy/realtek.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -62,6 +62,10 @@
- #define RTL8221B_SERDES_OPTION_MODE_2500BASEX		2
- #define RTL8221B_SERDES_OPTION_MODE_HISGMII		3
- 
-+#define RTL8221B_PHYCR1				0xa430
-+#define RTL8221B_PHYCR1_ALDPS_EN		BIT(2)
-+#define RTL8221B_PHYCR1_ALDPS_XTAL_OFF_EN	BIT(12)
-+
- #define RTL8366RB_POWER_SAVE			0x15
- #define RTL8366RB_POWER_SAVE_ON			BIT(12)
- 
-@@ -750,6 +754,25 @@ static int rtl8226_match_phy_device(stru
- 	       rtlgen_supports_2_5gbps(phydev);
- }
- 
-+static int rtl822x_probe(struct phy_device *phydev)
-+{
-+	struct device *dev = &phydev->mdio.dev;
-+	int val;
-+
-+	val = phy_read_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, RTL8221B_PHYCR1);
-+	if (val < 0)
-+		return val;
-+
-+	if (of_property_read_bool(dev->of_node, "realtek,aldps-enable"))
-+		val |= RTL8221B_PHYCR1_ALDPS_EN | RTL8221B_PHYCR1_ALDPS_XTAL_OFF_EN;
-+	else
-+		val &= ~(RTL8221B_PHYCR1_ALDPS_EN | RTL8221B_PHYCR1_ALDPS_XTAL_OFF_EN);
-+
-+	phy_write_mmd(phydev, RTL8221B_MMD_SERDES_CTRL, RTL8221B_PHYCR1, val);
-+
-+	return 0;
-+}
-+
- static int rtlgen_resume(struct phy_device *phydev)
- {
- 	int ret = genphy_resume(phydev);
-@@ -1061,6 +1084,7 @@ static struct phy_driver realtek_drvs[]
- 		.name           = "RTL8226-CG 2.5Gbps PHY",
- 		.get_features   = rtl822x_get_features,
- 		.config_aneg    = rtl822x_config_aneg,
-+		.probe          = rtl822x_probe,
- 		.read_status    = rtl822x_read_status,
- 		.suspend        = genphy_suspend,
- 		.resume         = rtlgen_resume,
-@@ -1072,6 +1096,7 @@ static struct phy_driver realtek_drvs[]
- 		.name           = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
- 		.get_features   = rtl822x_get_features,
- 		.config_aneg    = rtl822x_config_aneg,
-+		.probe          = rtl822x_probe,
- 		.read_status    = rtl822x_read_status,
- 		.suspend        = genphy_suspend,
- 		.resume         = rtlgen_resume,
-@@ -1084,6 +1109,7 @@ static struct phy_driver realtek_drvs[]
- 		.get_features   = rtl822x_get_features,
- 		.config_init    = rtl8221b_config_init,
- 		.config_aneg    = rtl822x_config_aneg,
-+		.probe          = rtl822x_probe,
- 		.read_status    = rtl822x_read_status,
- 		.suspend        = genphy_suspend,
- 		.resume         = rtlgen_resume,
-@@ -1096,6 +1122,7 @@ static struct phy_driver realtek_drvs[]
- 		.get_features   = rtl822x_get_features,
- 		.config_aneg    = rtl822x_config_aneg,
- 		.config_init    = rtl8221b_config_init,
-+		.probe          = rtl822x_probe,
- 		.read_status    = rtl822x_read_status,
- 		.suspend        = genphy_suspend,
- 		.resume         = rtlgen_resume,
diff --git a/target/linux/generic/pending-6.1/730-net-phy-realtek-detect-early-version-of-RTL8221B.patch b/target/linux/generic/pending-6.1/730-net-phy-realtek-detect-early-version-of-RTL8221B.patch
deleted file mode 100644
index 05edcc8bf43c..000000000000
--- a/target/linux/generic/pending-6.1/730-net-phy-realtek-detect-early-version-of-RTL8221B.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 0de82310d2b32e78ff79d42c08b1122a6ede3778 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 30 Apr 2023 00:15:41 +0100
-Subject: [PATCH] net: phy: realtek: detect early version of RTL8221B
-
-Early versions (?) of the RTL8221B PHY cannot be identified in a regular
-Clause-45 bus scan as the PHY doesn't report the implemented MMDs
-correctly but returns 0 instead.
-Implement custom identify function using the PKGID instead of iterating
-over the implemented MMDs.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -80,6 +80,7 @@
- 
- #define RTL_GENERIC_PHYID			0x001cc800
- #define RTL_8211FVD_PHYID			0x001cc878
-+#define RTL_8221B_VB_CG_PHYID			0x001cc849
- 
- MODULE_DESCRIPTION("Realtek PHY driver");
- MODULE_AUTHOR("Johnson Leung");
-@@ -754,6 +755,38 @@ static int rtl8226_match_phy_device(stru
- 	       rtlgen_supports_2_5gbps(phydev);
- }
- 
-+static int rtl8221b_vb_cg_match_phy_device(struct phy_device *phydev)
-+{
-+	int val;
-+	u32 id;
-+
-+	if (phydev->mdio.bus->probe_capabilities >= MDIOBUS_C45) {
-+		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PKGID1);
-+		if (val < 0)
-+			return 0;
-+
-+		id = val << 16;
-+		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PKGID2);
-+		if (val < 0)
-+			return 0;
-+
-+		id |= val;
-+	} else {
-+		val = phy_read(phydev, MII_PHYSID1);
-+		if (val < 0)
-+			return 0;
-+
-+		id = val << 16;
-+		val = phy_read(phydev, MII_PHYSID2);
-+		if (val < 0)
-+			return 0;
-+
-+		id |= val;
-+	}
-+
-+	return (id == RTL_8221B_VB_CG_PHYID);
-+}
-+
- static int rtl822x_probe(struct phy_device *phydev)
- {
- 	struct device *dev = &phydev->mdio.dev;
-@@ -1104,7 +1137,7 @@ static struct phy_driver realtek_drvs[]
- 		.write_page     = rtl821x_write_page,
- 		.soft_reset     = genphy_soft_reset,
- 	}, {
--		PHY_ID_MATCH_EXACT(0x001cc849),
-+		.match_phy_device = rtl8221b_vb_cg_match_phy_device,
- 		.name           = "RTL8221B-VB-CG 2.5Gbps PHY",
- 		.get_features   = rtl822x_get_features,
- 		.config_init    = rtl8221b_config_init,
diff --git a/target/linux/generic/pending-6.1/731-net-permit-ieee80211_ptr-even-with-no-CFG82111-suppo.patch b/target/linux/generic/pending-6.1/731-net-permit-ieee80211_ptr-even-with-no-CFG82111-suppo.patch
deleted file mode 100644
index f3725bf7d35b..000000000000
--- a/target/linux/generic/pending-6.1/731-net-permit-ieee80211_ptr-even-with-no-CFG82111-suppo.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 686c603f67ae87bf21a61b5e4b1564443f41c3ee Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 20 Oct 2022 03:34:43 +0200
-Subject: [PATCH] net: permit ieee80211_ptr even with no CFG82111 support
-
-Introduce a new flag CONFIG_CFG80211_HEADERS to compile in ieee80211_ptr
-even if CFG80211 support is not compiled in. This is needed for the
-backports project and for any downstream wireless driver that loads in
-the kernel dynamically.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- include/linux/netdevice.h       | 2 +-
- net/batman-adv/hard-interface.c | 2 +-
- net/wireless/Kconfig            | 4 ++++
- 3 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -2190,7 +2190,7 @@ struct net_device {
- #if IS_ENABLED(CONFIG_AX25)
- 	void			*ax25_ptr;
- #endif
--#if IS_ENABLED(CONFIG_CFG80211)
-+#if IS_ENABLED(CONFIG_CFG80211_HEADERS)
- 	struct wireless_dev	*ieee80211_ptr;
- #endif
- #if IS_ENABLED(CONFIG_IEEE802154) || IS_ENABLED(CONFIG_6LOWPAN)
---- a/net/batman-adv/hard-interface.c
-+++ b/net/batman-adv/hard-interface.c
-@@ -308,7 +308,7 @@ static bool batadv_is_cfg80211_netdev(st
- 	if (!net_device)
- 		return false;
- 
--#if IS_ENABLED(CONFIG_CFG80211)
-+#if IS_ENABLED(CONFIG_CFG80211_HEADERS)
- 	/* cfg80211 drivers have to set ieee80211_ptr */
- 	if (net_device->ieee80211_ptr)
- 		return true;
---- a/net/wireless/Kconfig
-+++ b/net/wireless/Kconfig
-@@ -26,6 +26,7 @@ config CFG80211
- 	# using a different algorithm, though right now they shouldn't
- 	# (this is here rather than below to allow it to be a module)
- 	select CRYPTO_SHA256 if CFG80211_USE_KERNEL_REGDB_KEYS
-+	select CFG80211_HEADERS
- 	help
- 	  cfg80211 is the Linux wireless LAN (802.11) configuration API.
- 	  Enable this if you have a wireless device.
-@@ -36,6 +37,9 @@ config CFG80211
- 
- 	  When built as a module it will be called cfg80211.
- 
-+config CFG80211_HEADERS
-+	bool "cfg80211 - headers support"
-+
- if CFG80211
- 
- config NL80211_TESTMODE
diff --git a/target/linux/generic/pending-6.1/732-00-net-ethernet-mtk_eth_soc-compile-out-netsys-v2-code-.patch b/target/linux/generic/pending-6.1/732-00-net-ethernet-mtk_eth_soc-compile-out-netsys-v2-code-.patch
deleted file mode 100644
index decf647bce9e..000000000000
--- a/target/linux/generic/pending-6.1/732-00-net-ethernet-mtk_eth_soc-compile-out-netsys-v2-code-.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 27 Oct 2022 23:39:52 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: compile out netsys v2 code
- on mt7621
-
-Avoid some branches in the hot path on low-end devices with limited CPU power,
-and reduce code size
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -1326,6 +1326,22 @@ struct mtk_mac {
- /* the struct describing the SoC. these are declared in the soc_xyz.c files */
- extern const struct of_device_id of_mtk_match[];
- 
-+#ifdef CONFIG_SOC_MT7621
-+static inline bool mtk_is_netsys_v1(struct mtk_eth *eth)
-+{
-+	return true;
-+}
-+
-+static inline bool mtk_is_netsys_v2_or_greater(struct mtk_eth *eth)
-+{
-+	return false;
-+}
-+
-+static inline bool mtk_is_netsys_v3_or_greater(struct mtk_eth *eth)
-+{
-+	return false;
-+}
-+#else
- static inline bool mtk_is_netsys_v1(struct mtk_eth *eth)
- {
- 	return eth->soc->version == 1;
-@@ -1340,6 +1356,7 @@ static inline bool mtk_is_netsys_v3_or_g
- {
- 	return eth->soc->version > 2;
- }
-+#endif
- 
- static inline struct mtk_foe_entry *
- mtk_foe_get_entry(struct mtk_ppe *ppe, u16 hash)
diff --git a/target/linux/generic/pending-6.1/732-01-net-ethernet-mtk_eth_soc-work-around-issue-with-send.patch b/target/linux/generic/pending-6.1/732-01-net-ethernet-mtk_eth_soc-work-around-issue-with-send.patch
deleted file mode 100644
index 600109a95050..000000000000
--- a/target/linux/generic/pending-6.1/732-01-net-ethernet-mtk_eth_soc-work-around-issue-with-send.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 3 Nov 2022 12:38:49 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: work around issue with sending
- small fragments
-
-When lots of frames are sent with a number of very small fragments, an
-internal FIFO can overflow, causing the DMA engine to lock up lock up and
-transmit attempts time out.
-
-Fix this on MT7986 by increasing the reserved FIFO space.
-Fix this on older chips by detecting the presence of small fragments and use
-skb_gso_segment + skb_linearize to deal with them.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -1561,12 +1561,28 @@ static void mtk_wake_queue(struct mtk_et
- 	}
- }
- 
-+static bool mtk_skb_has_small_frag(struct sk_buff *skb)
-+{
-+	int min_size = 16;
-+	int i;
-+
-+	if (skb_headlen(skb) < min_size)
-+		return true;
-+
-+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
-+		if (skb_frag_size(&skb_shinfo(skb)->frags[i]) < min_size)
-+			return true;
-+
-+	return false;
-+}
-+
- static netdev_tx_t mtk_start_xmit(struct sk_buff *skb, struct net_device *dev)
- {
- 	struct mtk_mac *mac = netdev_priv(dev);
- 	struct mtk_eth *eth = mac->hw;
- 	struct mtk_tx_ring *ring = &eth->tx_ring;
- 	struct net_device_stats *stats = &dev->stats;
-+	struct sk_buff *segs, *next;
- 	bool gso = false;
- 	int tx_num;
- 
-@@ -1588,6 +1604,18 @@ static netdev_tx_t mtk_start_xmit(struct
- 		return NETDEV_TX_BUSY;
- 	}
- 
-+	if (mtk_is_netsys_v1(eth) &&
-+	    skb_is_gso(skb) && mtk_skb_has_small_frag(skb)) {
-+		segs = skb_gso_segment(skb, dev->features & ~NETIF_F_ALL_TSO);
-+		if (IS_ERR(segs))
-+			goto drop;
-+
-+		if (segs) {
-+			consume_skb(skb);
-+			skb = segs;
-+		}
-+	}
-+
- 	/* TSO: fill MSS info in tcp checksum field */
- 	if (skb_is_gso(skb)) {
- 		if (skb_cow_head(skb, 0)) {
-@@ -1603,8 +1631,14 @@ static netdev_tx_t mtk_start_xmit(struct
- 		}
- 	}
- 
--	if (mtk_tx_map(skb, dev, tx_num, ring, gso) < 0)
--		goto drop;
-+	skb_list_walk_safe(skb, skb, next) {
-+		if ((mtk_is_netsys_v1(eth) &&
-+		     mtk_skb_has_small_frag(skb) && skb_linearize(skb)) ||
-+		    mtk_tx_map(skb, dev, tx_num, ring, gso) < 0) {
-+				stats->tx_dropped++;
-+				dev_kfree_skb_any(skb);
-+		}
-+	}
- 
- 	if (unlikely(atomic_read(&ring->free_count) <= ring->thresh))
- 		netif_tx_stop_all_queues(dev);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -268,7 +268,7 @@
- #define MTK_CHK_DDONE_EN	BIT(28)
- #define MTK_DMAD_WR_WDONE	BIT(26)
- #define MTK_WCOMP_EN		BIT(24)
--#define MTK_RESV_BUF		(0x40 << 16)
-+#define MTK_RESV_BUF		(0x80 << 16)
- #define MTK_MUTLI_CNT		(0x4 << 12)
- #define MTK_LEAKY_BUCKET_EN	BIT(11)
- 
diff --git a/target/linux/generic/pending-6.1/732-02-net-ethernet-mtk_eth_soc-set-NETIF_F_ALL_TSO.patch b/target/linux/generic/pending-6.1/732-02-net-ethernet-mtk_eth_soc-set-NETIF_F_ALL_TSO.patch
deleted file mode 100644
index 11a81dd0bfdc..000000000000
--- a/target/linux/generic/pending-6.1/732-02-net-ethernet-mtk_eth_soc-set-NETIF_F_ALL_TSO.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 28 Oct 2022 12:54:48 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: set NETIF_F_ALL_TSO
-
-Significantly improves performance by avoiding unnecessary segmentation
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -47,8 +47,7 @@
- #define MTK_HW_FEATURES		(NETIF_F_IP_CSUM | \
- 				 NETIF_F_RXCSUM | \
- 				 NETIF_F_HW_VLAN_CTAG_TX | \
--				 NETIF_F_SG | NETIF_F_TSO | \
--				 NETIF_F_TSO6 | \
-+				 NETIF_F_SG | NETIF_F_ALL_TSO | \
- 				 NETIF_F_IPV6_CSUM |\
- 				 NETIF_F_HW_TC)
- #define MTK_HW_FEATURES_MT7628	(NETIF_F_SG | NETIF_F_RXCSUM)
diff --git a/target/linux/generic/pending-6.1/732-03-net-ethernet-mtk_eth_soc-fix-remaining-throughput-re.patch b/target/linux/generic/pending-6.1/732-03-net-ethernet-mtk_eth_soc-fix-remaining-throughput-re.patch
deleted file mode 100644
index aa8607541731..000000000000
--- a/target/linux/generic/pending-6.1/732-03-net-ethernet-mtk_eth_soc-fix-remaining-throughput-re.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 29 Mar 2023 16:02:54 +0200
-Subject: [PATCH] net: ethernet: mtk_eth_soc: fix remaining throughput
- regression
-
-Based on further tests, it seems that the QDMA shaper is not able to
-perform shaping close to the MAC link rate without throughput loss.
-This cannot be compensated by increasing the shaping rate, so it seems
-to be an internal limit.
-
-Fix the remaining throughput regression by detecting that condition and
-limiting shaping to ports with lower link speed.
-
-This patch intentionally ignores link speed gain from TRGMII, because
-even on such links, shaping to 1000 Mbit/s incurs some throughput
-degradation.
-
-Fixes: f63959c7eec3 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
-Reported-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -766,6 +766,7 @@ static void mtk_mac_link_up(struct phyli
- 		 MAC_MCR_FORCE_RX_FC);
- 
- 	/* Configure speed */
-+	mac->speed = speed;
- 	switch (speed) {
- 	case SPEED_2500:
- 	case SPEED_1000:
-@@ -3347,6 +3348,9 @@ found:
- 	if (dp->index >= MTK_QDMA_NUM_QUEUES)
- 		return NOTIFY_DONE;
- 
-+	if (mac->speed > 0 && mac->speed <= s.base.speed)
-+		s.base.speed = 0;
-+
- 	mtk_set_queue_speed(eth, dp->index + 3, s.base.speed);
- 
- 	return NOTIFY_DONE;
diff --git a/target/linux/generic/pending-6.1/734-net-ethernet-mtk_eth_soc-ppe-fix-L2-offloading-with-.patch b/target/linux/generic/pending-6.1/734-net-ethernet-mtk_eth_soc-ppe-fix-L2-offloading-with-.patch
deleted file mode 100644
index 61042c1ad0f8..000000000000
--- a/target/linux/generic/pending-6.1/734-net-ethernet-mtk_eth_soc-ppe-fix-L2-offloading-with-.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 27 Dec 2022 15:02:51 +0100
-Subject: [PATCH] net: ethernet: mtk_eth_soc: ppe: fix L2 offloading with DSA
- untagging offload enabled
-
-Check for skb metadata in order to detect the case where the DSA header is not
-present.
-
-Fixes: 2d7605a72906 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging")
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ethernet/mediatek/mtk_ppe.c
-+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
-@@ -8,6 +8,7 @@
- #include <linux/platform_device.h>
- #include <linux/if_ether.h>
- #include <linux/if_vlan.h>
-+#include <net/dst_metadata.h>
- #include <net/dsa.h>
- #include "mtk_eth_soc.h"
- #include "mtk_ppe.h"
-@@ -829,7 +830,9 @@ void __mtk_ppe_check_skb(struct mtk_ppe
- 		    skb->dev->dsa_ptr->tag_ops->proto != DSA_TAG_PROTO_MTK)
- 			goto out;
- 
--		tag += 4;
-+		if (!skb_metadata_dst(skb))
-+			tag += 4;
-+
- 		if (get_unaligned_be16(tag) != ETH_P_8021Q)
- 			break;
- 
diff --git a/target/linux/generic/pending-6.1/737-net-ethernet-mtk_eth_soc-add-paths-and-SerDes-modes-.patch b/target/linux/generic/pending-6.1/737-net-ethernet-mtk_eth_soc-add-paths-and-SerDes-modes-.patch
deleted file mode 100644
index 2b379c915867..000000000000
--- a/target/linux/generic/pending-6.1/737-net-ethernet-mtk_eth_soc-add-paths-and-SerDes-modes-.patch
+++ /dev/null
@@ -1,936 +0,0 @@
-From d5e337e7aecc2e1cc9e96768062610adb95f8f72 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 12 Dec 2023 03:51:14 +0000
-Subject: [PATCH] net: ethernet: mtk_eth_soc: add paths and SerDes modes for
- MT7988
-
-MT7988 comes with a built-in 2.5G PHY as well as SerDes lanes to
-connect external PHYs or transceivers in USXGMII, 10GBase-R, 5GBase-R,
-2500Base-X, 1000Base-X and Cisco SGMII interface modes.
-
-Implement support for configuring for the new paths to SerDes interfaces
-and the internal 2.5G PHY.
-
-Add USXGMII PCS driver for 10GBase-R, 5GBase-R and USXGMII mode, and
-setup the new PHYA on MT7988 to access the also still existing old
-LynxI PCS for 1000Base-X, 2500Base-X and Cisco SGMII PCS interface
-modes.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_path.c | 122 +++++++-
- drivers/net/ethernet/mediatek/mtk_eth_soc.c  | 292 +++++++++++++++++--
- drivers/net/ethernet/mediatek/mtk_eth_soc.h  | 107 ++++++-
- 3 files changed, 470 insertions(+), 51 deletions(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_path.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_path.c
-@@ -31,10 +31,20 @@ static const char *mtk_eth_path_name(u64
- 		return "gmac2_rgmii";
- 	case MTK_ETH_PATH_GMAC2_SGMII:
- 		return "gmac2_sgmii";
-+	case MTK_ETH_PATH_GMAC2_2P5GPHY:
-+		return "gmac2_2p5gphy";
- 	case MTK_ETH_PATH_GMAC2_GEPHY:
- 		return "gmac2_gephy";
-+	case MTK_ETH_PATH_GMAC3_SGMII:
-+		return "gmac3_sgmii";
- 	case MTK_ETH_PATH_GDM1_ESW:
- 		return "gdm1_esw";
-+	case MTK_ETH_PATH_GMAC1_USXGMII:
-+		return "gmac1_usxgmii";
-+	case MTK_ETH_PATH_GMAC2_USXGMII:
-+		return "gmac2_usxgmii";
-+	case MTK_ETH_PATH_GMAC3_USXGMII:
-+		return "gmac3_usxgmii";
- 	default:
- 		return "unknown path";
- 	}
-@@ -127,6 +137,27 @@ static int set_mux_u3_gmac2_to_qphy(stru
- 	return 0;
- }
- 
-+static int set_mux_gmac2_to_2p5gphy(struct mtk_eth *eth, u64 path)
-+{
-+	int ret;
-+
-+	if (path == MTK_ETH_PATH_GMAC2_2P5GPHY) {
-+		ret = regmap_clear_bits(eth->ethsys, ETHSYS_SYSCFG0, SYSCFG0_SGMII_GMAC2_V2);
-+		if (ret)
-+			return ret;
-+
-+		/* Setup mux to 2p5g PHY */
-+		ret = regmap_clear_bits(eth->infra, TOP_MISC_NETSYS_PCS_MUX, MUX_G2_USXGMII_SEL);
-+		if (ret)
-+			return ret;
-+
-+		dev_dbg(eth->dev, "path %s in %s updated\n",
-+			mtk_eth_path_name(path), __func__);
-+	}
-+
-+	return 0;
-+}
-+
- static int set_mux_gmac1_gmac2_to_sgmii_rgmii(struct mtk_eth *eth, u64 path)
- {
- 	unsigned int val = 0;
-@@ -165,7 +196,48 @@ static int set_mux_gmac1_gmac2_to_sgmii_
- 	return 0;
- }
- 
--static int set_mux_gmac12_to_gephy_sgmii(struct mtk_eth *eth, u64 path)
-+static int set_mux_gmac123_to_usxgmii(struct mtk_eth *eth, u64 path)
-+{
-+	unsigned int val = 0;
-+	bool updated = true;
-+	int mac_id = 0;
-+
-+	/* Disable SYSCFG1 SGMII */
-+	regmap_read(eth->ethsys, ETHSYS_SYSCFG0, &val);
-+
-+	switch (path) {
-+	case MTK_ETH_PATH_GMAC1_USXGMII:
-+		val &= ~(u32)SYSCFG0_SGMII_GMAC1_V2;
-+		mac_id = MTK_GMAC1_ID;
-+		break;
-+	case MTK_ETH_PATH_GMAC2_USXGMII:
-+		val &= ~(u32)SYSCFG0_SGMII_GMAC2_V2;
-+		mac_id = MTK_GMAC2_ID;
-+		break;
-+	case MTK_ETH_PATH_GMAC3_USXGMII:
-+		val &= ~(u32)SYSCFG0_SGMII_GMAC3_V2;
-+		mac_id = MTK_GMAC3_ID;
-+		break;
-+	default:
-+		updated = false;
-+	};
-+
-+	if (updated) {
-+		regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0,
-+				   SYSCFG0_SGMII_MASK, val);
-+
-+		if (mac_id == MTK_GMAC2_ID)
-+			regmap_set_bits(eth->infra, TOP_MISC_NETSYS_PCS_MUX,
-+					MUX_G2_USXGMII_SEL);
-+	}
-+
-+	dev_dbg(eth->dev, "path %s in %s updated = %d\n",
-+		mtk_eth_path_name(path), __func__, updated);
-+
-+	return 0;
-+}
-+
-+static int set_mux_gmac123_to_gephy_sgmii(struct mtk_eth *eth, u64 path)
- {
- 	unsigned int val = 0;
- 	bool updated = true;
-@@ -182,6 +254,9 @@ static int set_mux_gmac12_to_gephy_sgmii
- 	case MTK_ETH_PATH_GMAC2_SGMII:
- 		val |= SYSCFG0_SGMII_GMAC2_V2;
- 		break;
-+	case MTK_ETH_PATH_GMAC3_SGMII:
-+		val |= SYSCFG0_SGMII_GMAC3_V2;
-+		break;
- 	default:
- 		updated = false;
- 	}
-@@ -210,13 +285,25 @@ static const struct mtk_eth_muxc mtk_eth
- 		.cap_bit = MTK_ETH_MUX_U3_GMAC2_TO_QPHY,
- 		.set_path = set_mux_u3_gmac2_to_qphy,
- 	}, {
-+		.name = "mux_gmac2_to_2p5gphy",
-+		.cap_bit = MTK_ETH_MUX_GMAC2_TO_2P5GPHY,
-+		.set_path = set_mux_gmac2_to_2p5gphy,
-+	}, {
- 		.name = "mux_gmac1_gmac2_to_sgmii_rgmii",
- 		.cap_bit = MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII,
- 		.set_path = set_mux_gmac1_gmac2_to_sgmii_rgmii,
- 	}, {
- 		.name = "mux_gmac12_to_gephy_sgmii",
- 		.cap_bit = MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII,
--		.set_path = set_mux_gmac12_to_gephy_sgmii,
-+		.set_path = set_mux_gmac123_to_gephy_sgmii,
-+	}, {
-+		.name = "mux_gmac123_to_gephy_sgmii",
-+		.cap_bit = MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII,
-+		.set_path = set_mux_gmac123_to_gephy_sgmii,
-+	}, {
-+		.name = "mux_gmac123_to_usxgmii",
-+		.cap_bit = MTK_ETH_MUX_GMAC123_TO_USXGMII,
-+		.set_path = set_mux_gmac123_to_usxgmii,
- 	},
- };
- 
-@@ -249,12 +336,39 @@ out:
- 	return err;
- }
- 
-+int mtk_gmac_usxgmii_path_setup(struct mtk_eth *eth, int mac_id)
-+{
-+	u64 path;
-+
-+	path = (mac_id == MTK_GMAC1_ID) ?  MTK_ETH_PATH_GMAC1_USXGMII :
-+	       (mac_id == MTK_GMAC2_ID) ?  MTK_ETH_PATH_GMAC2_USXGMII :
-+					   MTK_ETH_PATH_GMAC3_USXGMII;
-+
-+	/* Setup proper MUXes along the path */
-+	return mtk_eth_mux_setup(eth, path);
-+}
-+
- int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id)
- {
- 	u64 path;
- 
--	path = (mac_id == 0) ?  MTK_ETH_PATH_GMAC1_SGMII :
--				MTK_ETH_PATH_GMAC2_SGMII;
-+	path = (mac_id == MTK_GMAC1_ID) ? MTK_ETH_PATH_GMAC1_SGMII :
-+	       (mac_id == MTK_GMAC2_ID) ? MTK_ETH_PATH_GMAC2_SGMII :
-+					  MTK_ETH_PATH_GMAC3_SGMII;
-+
-+	/* Setup proper MUXes along the path */
-+	return mtk_eth_mux_setup(eth, path);
-+}
-+
-+int mtk_gmac_2p5gphy_path_setup(struct mtk_eth *eth, int mac_id)
-+{
-+	u64 path = 0;
-+
-+	if (mac_id == MTK_GMAC2_ID)
-+		path = MTK_ETH_PATH_GMAC2_2P5GPHY;
-+
-+	if (!path)
-+		return -EINVAL;
- 
- 	/* Setup proper MUXes along the path */
- 	return mtk_eth_mux_setup(eth, path);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -21,6 +21,8 @@
- #include <linux/pinctrl/devinfo.h>
- #include <linux/phylink.h>
- #include <linux/pcs/pcs-mtk-lynxi.h>
-+#include <linux/pcs/pcs-mtk-usxgmii.h>
-+#include <linux/phy/phy.h>
- #include <linux/jhash.h>
- #include <linux/bitfield.h>
- #include <net/dsa.h>
-@@ -258,12 +260,8 @@ static const char * const mtk_clks_sourc
- 	"ethwarp_wocpu2",
- 	"ethwarp_wocpu1",
- 	"ethwarp_wocpu0",
--	"top_usxgmii0_sel",
--	"top_usxgmii1_sel",
- 	"top_sgm0_sel",
- 	"top_sgm1_sel",
--	"top_xfi_phy0_xtal_sel",
--	"top_xfi_phy1_xtal_sel",
- 	"top_eth_gmii_sel",
- 	"top_eth_refck_50m_sel",
- 	"top_eth_sys_200m_sel",
-@@ -475,6 +473,30 @@ static void mtk_setup_bridge_switch(stru
- 		MTK_GSW_CFG);
- }
- 
-+static bool mtk_check_gmac23_idle(struct mtk_mac *mac)
-+{
-+	u32 mac_fsm, gdm_fsm;
-+
-+	mac_fsm = mtk_r32(mac->hw, MTK_MAC_FSM(mac->id));
-+
-+	switch (mac->id) {
-+	case MTK_GMAC2_ID:
-+		gdm_fsm = mtk_r32(mac->hw, MTK_FE_GDM2_FSM);
-+		break;
-+	case MTK_GMAC3_ID:
-+		gdm_fsm = mtk_r32(mac->hw, MTK_FE_GDM3_FSM);
-+		break;
-+	default:
-+		return true;
-+	};
-+
-+	if ((mac_fsm & 0xFFFF0000) == 0x01010000 &&
-+	    (gdm_fsm & 0xFFFF0000) == 0x00000000)
-+		return true;
-+
-+	return false;
-+}
-+
- static struct phylink_pcs *mtk_mac_select_pcs(struct phylink_config *config,
- 					      phy_interface_t interface)
- {
-@@ -483,6 +505,21 @@ static struct phylink_pcs *mtk_mac_selec
- 	struct mtk_eth *eth = mac->hw;
- 	unsigned int sid;
- 
-+	if (mtk_is_netsys_v3_or_greater(eth)) {
-+		switch (interface) {
-+		case PHY_INTERFACE_MODE_1000BASEX:
-+		case PHY_INTERFACE_MODE_2500BASEX:
-+		case PHY_INTERFACE_MODE_SGMII:
-+			return mac->sgmii_pcs;
-+		case PHY_INTERFACE_MODE_5GBASER:
-+		case PHY_INTERFACE_MODE_10GBASER:
-+		case PHY_INTERFACE_MODE_USXGMII:
-+			return mac->usxgmii_pcs;
-+		default:
-+			return NULL;
-+		}
-+	}
-+
- 	if (interface == PHY_INTERFACE_MODE_SGMII ||
- 	    phy_interface_mode_is_8023z(interface)) {
- 		sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ?
-@@ -544,7 +581,22 @@ static void mtk_mac_config(struct phylin
- 					goto init_err;
- 			}
- 			break;
-+		case PHY_INTERFACE_MODE_USXGMII:
-+		case PHY_INTERFACE_MODE_10GBASER:
-+		case PHY_INTERFACE_MODE_5GBASER:
-+			if (MTK_HAS_CAPS(eth->soc->caps, MTK_USXGMII)) {
-+				err = mtk_gmac_usxgmii_path_setup(eth, mac->id);
-+				if (err)
-+					goto init_err;
-+			}
-+			break;
- 		case PHY_INTERFACE_MODE_INTERNAL:
-+			if (mac->id == MTK_GMAC2_ID &&
-+			    MTK_HAS_CAPS(eth->soc->caps, MTK_2P5GPHY)) {
-+				err = mtk_gmac_2p5gphy_path_setup(eth, mac->id);
-+				if (err)
-+					goto init_err;
-+			}
- 			break;
- 		default:
- 			goto err_phy;
-@@ -599,8 +651,6 @@ static void mtk_mac_config(struct phylin
- 		val &= ~SYSCFG0_GE_MODE(SYSCFG0_GE_MASK, mac->id);
- 		val |= SYSCFG0_GE_MODE(ge_mode, mac->id);
- 		regmap_write(eth->ethsys, ETHSYS_SYSCFG0, val);
--
--		mac->interface = state->interface;
- 	}
- 
- 	/* SGMII */
-@@ -617,21 +667,40 @@ static void mtk_mac_config(struct phylin
- 
- 		/* Save the syscfg0 value for mac_finish */
- 		mac->syscfg0 = val;
--	} else if (phylink_autoneg_inband(mode)) {
-+	} else if (state->interface != PHY_INTERFACE_MODE_USXGMII &&
-+		   state->interface != PHY_INTERFACE_MODE_10GBASER &&
-+		   state->interface != PHY_INTERFACE_MODE_5GBASER &&
-+		   phylink_autoneg_inband(mode)) {
- 		dev_err(eth->dev,
--			"In-band mode not supported in non SGMII mode!\n");
-+			"In-band mode not supported in non-SerDes modes!\n");
- 		return;
- 	}
- 
- 	/* Setup gmac */
--	if (mtk_is_netsys_v3_or_greater(eth) &&
--	    mac->interface == PHY_INTERFACE_MODE_INTERNAL) {
--		mtk_w32(mac->hw, MTK_GDMA_XGDM_SEL, MTK_GDMA_EG_CTRL(mac->id));
--		mtk_w32(mac->hw, MAC_MCR_FORCE_LINK_DOWN, MTK_MAC_MCR(mac->id));
-+	if (mtk_is_netsys_v3_or_greater(eth)) {
-+		if (mtk_interface_mode_is_xgmii(state->interface)) {
-+			mtk_w32(mac->hw, MTK_GDMA_XGDM_SEL, MTK_GDMA_EG_CTRL(mac->id));
-+			mtk_w32(mac->hw, MAC_MCR_FORCE_LINK_DOWN, MTK_MAC_MCR(mac->id));
-+
-+			if (mac->id == MTK_GMAC1_ID)
-+				mtk_setup_bridge_switch(eth);
-+		} else {
-+			mtk_w32(eth, 0, MTK_GDMA_EG_CTRL(mac->id));
- 
--		mtk_setup_bridge_switch(eth);
-+			/* FIXME: In current hardware design, we have to reset FE
-+			 * when swtiching XGDM to GDM. Therefore, here trigger an SER
-+			 * to let GDM go back to the initial state.
-+			 */
-+			if ((mtk_interface_mode_is_xgmii(mac->interface) ||
-+			     mac->interface == PHY_INTERFACE_MODE_NA) &&
-+			    !mtk_check_gmac23_idle(mac) &&
-+			    !test_bit(MTK_RESETTING, &eth->state))
-+				schedule_work(&eth->pending_work);
-+		}
- 	}
- 
-+	mac->interface = state->interface;
-+
- 	return;
- 
- err_phy:
-@@ -644,6 +713,18 @@ init_err:
- 		mac->id, phy_modes(state->interface), err);
- }
- 
-+static int mtk_mac_prepare(struct phylink_config *config, unsigned int mode,
-+			   phy_interface_t interface)
-+{
-+	struct mtk_mac *mac = container_of(config, struct mtk_mac,
-+					   phylink_config);
-+
-+	if (mac->pextp && mac->interface != interface)
-+		phy_reset(mac->pextp);
-+
-+	return 0;
-+}
-+
- static int mtk_mac_finish(struct phylink_config *config, unsigned int mode,
- 			  phy_interface_t interface)
- {
-@@ -652,6 +733,10 @@ static int mtk_mac_finish(struct phylink
- 	struct mtk_eth *eth = mac->hw;
- 	u32 mcr_cur, mcr_new;
- 
-+	/* Setup PMA/PMD */
-+	if (mac->pextp)
-+		phy_set_mode_ext(mac->pextp, PHY_MODE_ETHERNET, interface);
-+
- 	/* Enable SGMII */
- 	if (interface == PHY_INTERFACE_MODE_SGMII ||
- 	    phy_interface_mode_is_8023z(interface))
-@@ -676,10 +761,14 @@ static void mtk_mac_link_down(struct phy
- {
- 	struct mtk_mac *mac = container_of(config, struct mtk_mac,
- 					   phylink_config);
--	u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
- 
--	mcr &= ~(MAC_MCR_TX_EN | MAC_MCR_RX_EN | MAC_MCR_FORCE_LINK);
--	mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
-+	if (!mtk_interface_mode_is_xgmii(interface)) {
-+		mtk_m32(mac->hw, MAC_MCR_TX_EN | MAC_MCR_RX_EN | MAC_MCR_FORCE_LINK, 0, MTK_MAC_MCR(mac->id));
-+		if (mtk_is_netsys_v3_or_greater(mac->hw))
-+			mtk_m32(mac->hw, MTK_XGMAC_FORCE_LINK(mac->id), 0, MTK_XGMAC_STS(mac->id));
-+	} else if (mtk_is_netsys_v3_or_greater(mac->hw) && mac->id != MTK_GMAC1_ID) {
-+		mtk_m32(mac->hw, XMAC_MCR_TRX_DISABLE, XMAC_MCR_TRX_DISABLE, MTK_XMAC_MCR(mac->id));
-+	}
- }
- 
- static void mtk_set_queue_speed(struct mtk_eth *eth, unsigned int idx,
-@@ -751,13 +840,11 @@ static void mtk_set_queue_speed(struct m
- 	mtk_w32(eth, val, soc->reg_map->qdma.qtx_sch + ofs);
- }
- 
--static void mtk_mac_link_up(struct phylink_config *config,
--			    struct phy_device *phy,
--			    unsigned int mode, phy_interface_t interface,
--			    int speed, int duplex, bool tx_pause, bool rx_pause)
-+static void mtk_gdm_mac_link_up(struct mtk_mac *mac,
-+				struct phy_device *phy,
-+				unsigned int mode, phy_interface_t interface,
-+				int speed, int duplex, bool tx_pause, bool rx_pause)
- {
--	struct mtk_mac *mac = container_of(config, struct mtk_mac,
--					   phylink_config);
- 	u32 mcr;
- 
- 	mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
-@@ -791,9 +878,63 @@ static void mtk_mac_link_up(struct phyli
- 	mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
- }
- 
-+static void mtk_xgdm_mac_link_up(struct mtk_mac *mac,
-+				 struct phy_device *phy,
-+				 unsigned int mode, phy_interface_t interface,
-+				 int speed, int duplex, bool tx_pause, bool rx_pause)
-+{
-+	u32 mcr, force_link = 0;
-+
-+	if (mac->id == MTK_GMAC1_ID)
-+		return;
-+
-+	/* Eliminate the interference(before link-up) caused by PHY noise */
-+	mtk_m32(mac->hw, XMAC_LOGIC_RST, 0, MTK_XMAC_LOGIC_RST(mac->id));
-+	mdelay(20);
-+	mtk_m32(mac->hw, XMAC_GLB_CNTCLR, XMAC_GLB_CNTCLR, MTK_XMAC_CNT_CTRL(mac->id));
-+
-+	if (mac->interface == PHY_INTERFACE_MODE_INTERNAL || mac->id == MTK_GMAC3_ID)
-+		force_link = MTK_XGMAC_FORCE_LINK(mac->id);
-+
-+	mtk_m32(mac->hw, MTK_XGMAC_FORCE_LINK(mac->id), force_link, MTK_XGMAC_STS(mac->id));
-+
-+	mcr = mtk_r32(mac->hw, MTK_XMAC_MCR(mac->id));
-+	mcr &= ~(XMAC_MCR_FORCE_TX_FC | XMAC_MCR_FORCE_RX_FC | XMAC_MCR_TRX_DISABLE);
-+	/* Configure pause modes -
-+	 * phylink will avoid these for half duplex
-+	 */
-+	if (tx_pause)
-+		mcr |= XMAC_MCR_FORCE_TX_FC;
-+	if (rx_pause)
-+		mcr |= XMAC_MCR_FORCE_RX_FC;
-+
-+	mtk_w32(mac->hw, mcr, MTK_XMAC_MCR(mac->id));
-+}
-+
-+static void mtk_mac_link_up(struct phylink_config *config,
-+			    struct phy_device *phy,
-+			    unsigned int mode, phy_interface_t interface,
-+			    int speed, int duplex, bool tx_pause, bool rx_pause)
-+{
-+	struct mtk_mac *mac = container_of(config, struct mtk_mac,
-+					   phylink_config);
-+
-+	if (mtk_is_netsys_v3_or_greater(mac->hw) && mtk_interface_mode_is_xgmii(interface))
-+		mtk_xgdm_mac_link_up(mac, phy, mode, interface, speed, duplex,
-+				     tx_pause, rx_pause);
-+	else
-+		mtk_gdm_mac_link_up(mac, phy, mode, interface, speed, duplex,
-+				    tx_pause, rx_pause);
-+
-+	/* Repeat pextp setup to tune link */
-+	if (mac->pextp)
-+		phy_set_mode_ext(mac->pextp, PHY_MODE_ETHERNET, interface);
-+}
-+
- static const struct phylink_mac_ops mtk_phylink_ops = {
- 	.mac_select_pcs = mtk_mac_select_pcs,
- 	.mac_config = mtk_mac_config,
-+	.mac_prepare = mtk_mac_prepare,
- 	.mac_finish = mtk_mac_finish,
- 	.mac_link_down = mtk_mac_link_down,
- 	.mac_link_up = mtk_mac_link_up,
-@@ -3372,6 +3513,9 @@ static int mtk_open(struct net_device *d
- 	struct mtk_eth *eth = mac->hw;
- 	int i, err;
- 
-+	if (mac->pextp)
-+		phy_power_on(mac->pextp);
-+
- 	err = phylink_of_phy_connect(mac->phylink, mac->of_node, 0);
- 	if (err) {
- 		netdev_err(dev, "%s: could not attach PHY: %d\n", __func__,
-@@ -3500,6 +3644,9 @@ static int mtk_stop(struct net_device *d
- 	for (i = 0; i < ARRAY_SIZE(eth->ppe); i++)
- 		mtk_ppe_stop(eth->ppe[i]);
- 
-+	if (mac->pextp)
-+		phy_power_off(mac->pextp);
-+
- 	return 0;
- }
- 
-@@ -4497,6 +4644,7 @@ static const struct net_device_ops mtk_n
- static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
- {
- 	const __be32 *_id = of_get_property(np, "reg", NULL);
-+	struct device_node *pcs_np;
- 	phy_interface_t phy_mode;
- 	struct phylink *phylink;
- 	struct mtk_mac *mac;
-@@ -4532,16 +4680,41 @@ static int mtk_add_mac(struct mtk_eth *e
- 	mac->id = id;
- 	mac->hw = eth;
- 	mac->of_node = np;
-+	pcs_np = of_parse_phandle(mac->of_node, "pcs-handle", 0);
-+	if (pcs_np) {
-+		mac->sgmii_pcs = mtk_pcs_lynxi_get(eth->dev, pcs_np);
-+		if (IS_ERR(mac->sgmii_pcs)) {
-+			if (PTR_ERR(mac->sgmii_pcs) == -EPROBE_DEFER)
-+				return -EPROBE_DEFER;
- 
--	err = of_get_ethdev_address(mac->of_node, eth->netdev[id]);
--	if (err == -EPROBE_DEFER)
--		return err;
-+			dev_err(eth->dev, "cannot select SGMII PCS, error %ld\n",
-+				PTR_ERR(mac->sgmii_pcs));
-+			return PTR_ERR(mac->sgmii_pcs);
-+		}
-+	}
- 
--	if (err) {
--		/* If the mac address is invalid, use random mac address */
--		eth_hw_addr_random(eth->netdev[id]);
--		dev_err(eth->dev, "generated random MAC address %pM\n",
--			eth->netdev[id]->dev_addr);
-+	pcs_np = of_parse_phandle(mac->of_node, "pcs-handle", 1);
-+	if (pcs_np) {
-+		mac->usxgmii_pcs = mtk_usxgmii_pcs_get(eth->dev, pcs_np);
-+		if (IS_ERR(mac->usxgmii_pcs)) {
-+			if (PTR_ERR(mac->usxgmii_pcs) == -EPROBE_DEFER)
-+				return -EPROBE_DEFER;
-+
-+			dev_err(eth->dev, "cannot select USXGMII PCS, error %ld\n",
-+				PTR_ERR(mac->usxgmii_pcs));
-+			return PTR_ERR(mac->usxgmii_pcs);
-+		}
-+	}
-+
-+	if (mtk_is_netsys_v3_or_greater(eth) && (mac->sgmii_pcs || mac->usxgmii_pcs)) {
-+		mac->pextp = devm_of_phy_get(eth->dev, mac->of_node, NULL);
-+		if (IS_ERR(mac->pextp)) {
-+			if (PTR_ERR(mac->pextp) != -EPROBE_DEFER)
-+				dev_err(eth->dev, "cannot get PHY, error %ld\n",
-+					PTR_ERR(mac->pextp));
-+
-+			return PTR_ERR(mac->pextp);
-+		}
- 	}
- 
- 	memset(mac->hwlro_ip, 0, sizeof(mac->hwlro_ip));
-@@ -4615,8 +4788,21 @@ static int mtk_add_mac(struct mtk_eth *e
- 		phy_interface_zero(mac->phylink_config.supported_interfaces);
- 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
- 			  mac->phylink_config.supported_interfaces);
-+	} else if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_USXGMII)) {
-+		mac->phylink_config.mac_capabilities |= MAC_5000FD | MAC_10000FD;
-+		__set_bit(PHY_INTERFACE_MODE_5GBASER,
-+			  mac->phylink_config.supported_interfaces);
-+		__set_bit(PHY_INTERFACE_MODE_10GBASER,
-+			  mac->phylink_config.supported_interfaces);
-+		__set_bit(PHY_INTERFACE_MODE_USXGMII,
-+			  mac->phylink_config.supported_interfaces);
- 	}
- 
-+	if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_2P5GPHY) &&
-+	    id == MTK_GMAC2_ID)
-+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
-+			  mac->phylink_config.supported_interfaces);
-+
- 	phylink = phylink_create(&mac->phylink_config,
- 				 of_fwnode_handle(mac->of_node),
- 				 phy_mode, &mtk_phylink_ops);
-@@ -4661,6 +4847,26 @@ free_netdev:
- 	return err;
- }
- 
-+static int mtk_mac_assign_address(struct mtk_eth *eth, int i, bool test_defer_only)
-+{
-+	int err = of_get_ethdev_address(eth->mac[i]->of_node, eth->netdev[i]);
-+
-+	if (err == -EPROBE_DEFER)
-+		return err;
-+
-+	if (test_defer_only)
-+		return 0;
-+
-+	if (err) {
-+		/* If the mac address is invalid, use random mac address */
-+		eth_hw_addr_random(eth->netdev[i]);
-+		dev_err(eth->dev, "generated random MAC address %pM\n",
-+			eth->netdev[i]);
-+	}
-+
-+	return 0;
-+}
-+
- void mtk_eth_set_dma_device(struct mtk_eth *eth, struct device *dma_dev)
- {
- 	struct net_device *dev, *tmp;
-@@ -4804,7 +5010,8 @@ static int mtk_probe(struct platform_dev
- 			regmap_write(cci, 0, 3);
- 	}
- 
--	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII)) {
-+	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII) &&
-+	    !mtk_is_netsys_v3_or_greater(eth)) {
- 		err = mtk_sgmii_init(eth);
- 
- 		if (err)
-@@ -4915,6 +5122,24 @@ static int mtk_probe(struct platform_dev
- 		}
- 	}
- 
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
-+		if (!eth->netdev[i])
-+			continue;
-+
-+		err = mtk_mac_assign_address(eth, i, true);
-+		if (err)
-+			goto err_deinit_hw;
-+	}
-+
-+	for (i = 0; i < MTK_MAX_DEVS; i++) {
-+		if (!eth->netdev[i])
-+			continue;
-+
-+		err = mtk_mac_assign_address(eth, i, false);
-+		if (err)
-+			goto err_deinit_hw;
-+	}
-+
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_INT)) {
- 		err = devm_request_irq(eth->dev, eth->irq[0],
- 				       mtk_handle_irq, 0,
-@@ -5017,6 +5242,11 @@ static int mtk_remove(struct platform_de
- 		mtk_stop(eth->netdev[i]);
- 		mac = netdev_priv(eth->netdev[i]);
- 		phylink_disconnect_phy(mac->phylink);
-+		if (mac->sgmii_pcs)
-+			mtk_pcs_lynxi_put(mac->sgmii_pcs);
-+
-+		if (mac->usxgmii_pcs)
-+			mtk_usxgmii_pcs_put(mac->usxgmii_pcs);
- 	}
- 
- 	mtk_wed_exit();
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -15,6 +15,7 @@
- #include <linux/u64_stats_sync.h>
- #include <linux/refcount.h>
- #include <linux/phylink.h>
-+#include <linux/reset.h>
- #include <linux/rhashtable.h>
- #include <linux/dim.h>
- #include <linux/bitfield.h>
-@@ -502,6 +503,21 @@
- #define INTF_MODE_RGMII_1000    (TRGMII_MODE | TRGMII_CENTRAL_ALIGNED)
- #define INTF_MODE_RGMII_10_100  0
- 
-+/* XFI Mac control registers */
-+#define MTK_XMAC_BASE(x)	(0x12000 + (((x) - 1) * 0x1000))
-+#define MTK_XMAC_MCR(x)		(MTK_XMAC_BASE(x))
-+#define XMAC_MCR_TRX_DISABLE	0xf
-+#define XMAC_MCR_FORCE_TX_FC	BIT(5)
-+#define XMAC_MCR_FORCE_RX_FC	BIT(4)
-+
-+/* XFI Mac logic reset registers */
-+#define MTK_XMAC_LOGIC_RST(x)	(MTK_XMAC_BASE(x) + 0x10)
-+#define XMAC_LOGIC_RST		BIT(0)
-+
-+/* XFI Mac count global control */
-+#define MTK_XMAC_CNT_CTRL(x)	(MTK_XMAC_BASE(x) + 0x100)
-+#define XMAC_GLB_CNTCLR		BIT(0)
-+
- /* GPIO port control registers for GMAC 2*/
- #define GPIO_OD33_CTRL8		0x4c0
- #define GPIO_BIAS_CTRL		0xed0
-@@ -527,6 +543,7 @@
- #define SYSCFG0_SGMII_GMAC2    ((3 << 8) & SYSCFG0_SGMII_MASK)
- #define SYSCFG0_SGMII_GMAC1_V2 BIT(9)
- #define SYSCFG0_SGMII_GMAC2_V2 BIT(8)
-+#define SYSCFG0_SGMII_GMAC3_V2 BIT(7)
- 
- 
- /* ethernet subsystem clock register */
-@@ -565,6 +582,11 @@
- #define GEPHY_MAC_SEL          BIT(1)
- 
- /* Top misc registers */
-+#define TOP_MISC_NETSYS_PCS_MUX	0x84
-+#define NETSYS_PCS_MUX_MASK	GENMASK(1, 0)
-+#define	MUX_G2_USXGMII_SEL	BIT(1)
-+#define MUX_HSGMII1_G1_SEL	BIT(0)
-+
- #define USB_PHY_SWITCH_REG	0x218
- #define QPHY_SEL_MASK		GENMASK(1, 0)
- #define SGMII_QPHY_SEL		0x2
-@@ -589,6 +611,8 @@
- #define MT7628_SDM_RBCNT	(MT7628_SDM_OFFSET + 0x10c)
- #define MT7628_SDM_CS_ERR	(MT7628_SDM_OFFSET + 0x110)
- 
-+/* Debug Purpose Register */
-+#define MTK_PSE_FQFC_CFG	0x100
- #define MTK_FE_CDM1_FSM		0x220
- #define MTK_FE_CDM2_FSM		0x224
- #define MTK_FE_CDM3_FSM		0x238
-@@ -597,6 +621,11 @@
- #define MTK_FE_CDM6_FSM		0x328
- #define MTK_FE_GDM1_FSM		0x228
- #define MTK_FE_GDM2_FSM		0x22C
-+#define MTK_FE_GDM3_FSM		0x23C
-+#define MTK_FE_PSE_FREE		0x240
-+#define MTK_FE_DROP_FQ		0x244
-+#define MTK_FE_DROP_FC		0x248
-+#define MTK_FE_DROP_PPE		0x24C
- 
- #define MTK_MAC_FSM(x)		(0x1010C + ((x) * 0x100))
- 
-@@ -721,12 +750,8 @@ enum mtk_clks_map {
- 	MTK_CLK_ETHWARP_WOCPU2,
- 	MTK_CLK_ETHWARP_WOCPU1,
- 	MTK_CLK_ETHWARP_WOCPU0,
--	MTK_CLK_TOP_USXGMII_SBUS_0_SEL,
--	MTK_CLK_TOP_USXGMII_SBUS_1_SEL,
- 	MTK_CLK_TOP_SGM_0_SEL,
- 	MTK_CLK_TOP_SGM_1_SEL,
--	MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL,
--	MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL,
- 	MTK_CLK_TOP_ETH_GMII_SEL,
- 	MTK_CLK_TOP_ETH_REFCK_50M_SEL,
- 	MTK_CLK_TOP_ETH_SYS_200M_SEL,
-@@ -797,19 +822,9 @@ enum mtk_clks_map {
- 				 BIT_ULL(MTK_CLK_GP3) | BIT_ULL(MTK_CLK_XGP1) | \
- 				 BIT_ULL(MTK_CLK_XGP2) | BIT_ULL(MTK_CLK_XGP3) | \
- 				 BIT_ULL(MTK_CLK_CRYPTO) | \
--				 BIT_ULL(MTK_CLK_SGMII_TX_250M) | \
--				 BIT_ULL(MTK_CLK_SGMII_RX_250M) | \
--				 BIT_ULL(MTK_CLK_SGMII2_TX_250M) | \
--				 BIT_ULL(MTK_CLK_SGMII2_RX_250M) | \
- 				 BIT_ULL(MTK_CLK_ETHWARP_WOCPU2) | \
- 				 BIT_ULL(MTK_CLK_ETHWARP_WOCPU1) | \
- 				 BIT_ULL(MTK_CLK_ETHWARP_WOCPU0) | \
--				 BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_0_SEL) | \
--				 BIT_ULL(MTK_CLK_TOP_USXGMII_SBUS_1_SEL) | \
--				 BIT_ULL(MTK_CLK_TOP_SGM_0_SEL) | \
--				 BIT_ULL(MTK_CLK_TOP_SGM_1_SEL) | \
--				 BIT_ULL(MTK_CLK_TOP_XFI_PHY_0_XTAL_SEL) | \
--				 BIT_ULL(MTK_CLK_TOP_XFI_PHY_1_XTAL_SEL) | \
- 				 BIT_ULL(MTK_CLK_TOP_ETH_GMII_SEL) | \
- 				 BIT_ULL(MTK_CLK_TOP_ETH_REFCK_50M_SEL) | \
- 				 BIT_ULL(MTK_CLK_TOP_ETH_SYS_200M_SEL) | \
-@@ -943,6 +958,8 @@ enum mkt_eth_capabilities {
- 	MTK_RGMII_BIT = 0,
- 	MTK_TRGMII_BIT,
- 	MTK_SGMII_BIT,
-+	MTK_USXGMII_BIT,
-+	MTK_2P5GPHY_BIT,
- 	MTK_ESW_BIT,
- 	MTK_GEPHY_BIT,
- 	MTK_MUX_BIT,
-@@ -963,8 +980,11 @@ enum mkt_eth_capabilities {
- 	MTK_ETH_MUX_GDM1_TO_GMAC1_ESW_BIT,
- 	MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY_BIT,
- 	MTK_ETH_MUX_U3_GMAC2_TO_QPHY_BIT,
-+	MTK_ETH_MUX_GMAC2_TO_2P5GPHY_BIT,
- 	MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT,
- 	MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII_BIT,
-+	MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII_BIT,
-+	MTK_ETH_MUX_GMAC123_TO_USXGMII_BIT,
- 
- 	/* PATH BITS */
- 	MTK_ETH_PATH_GMAC1_RGMII_BIT,
-@@ -972,14 +992,21 @@ enum mkt_eth_capabilities {
- 	MTK_ETH_PATH_GMAC1_SGMII_BIT,
- 	MTK_ETH_PATH_GMAC2_RGMII_BIT,
- 	MTK_ETH_PATH_GMAC2_SGMII_BIT,
-+	MTK_ETH_PATH_GMAC2_2P5GPHY_BIT,
- 	MTK_ETH_PATH_GMAC2_GEPHY_BIT,
-+	MTK_ETH_PATH_GMAC3_SGMII_BIT,
- 	MTK_ETH_PATH_GDM1_ESW_BIT,
-+	MTK_ETH_PATH_GMAC1_USXGMII_BIT,
-+	MTK_ETH_PATH_GMAC2_USXGMII_BIT,
-+	MTK_ETH_PATH_GMAC3_USXGMII_BIT,
- };
- 
- /* Supported hardware group on SoCs */
- #define MTK_RGMII		BIT_ULL(MTK_RGMII_BIT)
- #define MTK_TRGMII		BIT_ULL(MTK_TRGMII_BIT)
- #define MTK_SGMII		BIT_ULL(MTK_SGMII_BIT)
-+#define MTK_USXGMII		BIT_ULL(MTK_USXGMII_BIT)
-+#define MTK_2P5GPHY		BIT_ULL(MTK_2P5GPHY_BIT)
- #define MTK_ESW			BIT_ULL(MTK_ESW_BIT)
- #define MTK_GEPHY		BIT_ULL(MTK_GEPHY_BIT)
- #define MTK_MUX			BIT_ULL(MTK_MUX_BIT)
-@@ -1002,10 +1029,16 @@ enum mkt_eth_capabilities {
- 	BIT_ULL(MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY_BIT)
- #define MTK_ETH_MUX_U3_GMAC2_TO_QPHY		\
- 	BIT_ULL(MTK_ETH_MUX_U3_GMAC2_TO_QPHY_BIT)
-+#define MTK_ETH_MUX_GMAC2_TO_2P5GPHY		\
-+	BIT_ULL(MTK_ETH_MUX_GMAC2_TO_2P5GPHY_BIT)
- #define MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII	\
- 	BIT_ULL(MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII_BIT)
- #define MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII	\
- 	BIT_ULL(MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII_BIT)
-+#define MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII	\
-+	BIT_ULL(MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII_BIT)
-+#define MTK_ETH_MUX_GMAC123_TO_USXGMII	\
-+	BIT_ULL(MTK_ETH_MUX_GMAC123_TO_USXGMII_BIT)
- 
- /* Supported path present on SoCs */
- #define MTK_ETH_PATH_GMAC1_RGMII	BIT_ULL(MTK_ETH_PATH_GMAC1_RGMII_BIT)
-@@ -1013,8 +1046,13 @@ enum mkt_eth_capabilities {
- #define MTK_ETH_PATH_GMAC1_SGMII	BIT_ULL(MTK_ETH_PATH_GMAC1_SGMII_BIT)
- #define MTK_ETH_PATH_GMAC2_RGMII	BIT_ULL(MTK_ETH_PATH_GMAC2_RGMII_BIT)
- #define MTK_ETH_PATH_GMAC2_SGMII	BIT_ULL(MTK_ETH_PATH_GMAC2_SGMII_BIT)
-+#define MTK_ETH_PATH_GMAC2_2P5GPHY	BIT_ULL(MTK_ETH_PATH_GMAC2_2P5GPHY_BIT)
- #define MTK_ETH_PATH_GMAC2_GEPHY	BIT_ULL(MTK_ETH_PATH_GMAC2_GEPHY_BIT)
-+#define MTK_ETH_PATH_GMAC3_SGMII	BIT_ULL(MTK_ETH_PATH_GMAC3_SGMII_BIT)
- #define MTK_ETH_PATH_GDM1_ESW		BIT_ULL(MTK_ETH_PATH_GDM1_ESW_BIT)
-+#define MTK_ETH_PATH_GMAC1_USXGMII	BIT_ULL(MTK_ETH_PATH_GMAC1_USXGMII_BIT)
-+#define MTK_ETH_PATH_GMAC2_USXGMII	BIT_ULL(MTK_ETH_PATH_GMAC2_USXGMII_BIT)
-+#define MTK_ETH_PATH_GMAC3_USXGMII	BIT_ULL(MTK_ETH_PATH_GMAC3_USXGMII_BIT)
- 
- #define MTK_GMAC1_RGMII		(MTK_ETH_PATH_GMAC1_RGMII | MTK_RGMII)
- #define MTK_GMAC1_TRGMII	(MTK_ETH_PATH_GMAC1_TRGMII | MTK_TRGMII)
-@@ -1022,7 +1060,12 @@ enum mkt_eth_capabilities {
- #define MTK_GMAC2_RGMII		(MTK_ETH_PATH_GMAC2_RGMII | MTK_RGMII)
- #define MTK_GMAC2_SGMII		(MTK_ETH_PATH_GMAC2_SGMII | MTK_SGMII)
- #define MTK_GMAC2_GEPHY		(MTK_ETH_PATH_GMAC2_GEPHY | MTK_GEPHY)
-+#define MTK_GMAC2_2P5GPHY	(MTK_ETH_PATH_GMAC2_2P5GPHY | MTK_2P5GPHY)
-+#define MTK_GMAC3_SGMII		(MTK_ETH_PATH_GMAC3_SGMII | MTK_SGMII)
- #define MTK_GDM1_ESW		(MTK_ETH_PATH_GDM1_ESW | MTK_ESW)
-+#define MTK_GMAC1_USXGMII	(MTK_ETH_PATH_GMAC1_USXGMII | MTK_USXGMII)
-+#define MTK_GMAC2_USXGMII	(MTK_ETH_PATH_GMAC2_USXGMII | MTK_USXGMII)
-+#define MTK_GMAC3_USXGMII	(MTK_ETH_PATH_GMAC3_USXGMII | MTK_USXGMII)
- 
- /* MUXes present on SoCs */
- /* 0: GDM1 -> GMAC1, 1: GDM1 -> ESW */
-@@ -1041,10 +1084,20 @@ enum mkt_eth_capabilities {
- 	(MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII | MTK_MUX | \
- 	MTK_SHARED_SGMII)
- 
-+/* 2: GMAC2 -> XGMII */
-+#define MTK_MUX_GMAC2_TO_2P5GPHY      \
-+	(MTK_ETH_MUX_GMAC2_TO_2P5GPHY | MTK_MUX | MTK_INFRA)
-+
- /* 0: GMACx -> GEPHY, 1: GMACx -> SGMII where x is 1 or 2 */
- #define MTK_MUX_GMAC12_TO_GEPHY_SGMII   \
- 	(MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII | MTK_MUX)
- 
-+#define MTK_MUX_GMAC123_TO_GEPHY_SGMII   \
-+	(MTK_ETH_MUX_GMAC123_TO_GEPHY_SGMII | MTK_MUX)
-+
-+#define MTK_MUX_GMAC123_TO_USXGMII   \
-+	(MTK_ETH_MUX_GMAC123_TO_USXGMII | MTK_MUX | MTK_INFRA)
-+
- #define MTK_HAS_CAPS(caps, _x)		(((caps) & (_x)) == (_x))
- 
- #define MT7621_CAPS  (MTK_GMAC1_RGMII | MTK_GMAC1_TRGMII | \
-@@ -1076,8 +1129,12 @@ enum mkt_eth_capabilities {
- 		      MTK_MUX_GMAC12_TO_GEPHY_SGMII | MTK_QDMA | \
- 		      MTK_RSTCTRL_PPE1 | MTK_SRAM)
- 
--#define MT7988_CAPS  (MTK_36BIT_DMA | MTK_GDM1_ESW | MTK_QDMA | \
--		      MTK_RSTCTRL_PPE1 | MTK_RSTCTRL_PPE2 | MTK_SRAM)
-+#define MT7988_CAPS  (MTK_36BIT_DMA | MTK_GDM1_ESW | MTK_GMAC1_SGMII | \
-+		      MTK_GMAC2_2P5GPHY | MTK_GMAC2_SGMII | MTK_GMAC2_USXGMII | \
-+		      MTK_GMAC3_SGMII | MTK_GMAC3_USXGMII | \
-+		      MTK_MUX_GMAC123_TO_GEPHY_SGMII | \
-+		      MTK_MUX_GMAC123_TO_USXGMII | MTK_MUX_GMAC2_TO_2P5GPHY | \
-+		      MTK_QDMA | MTK_RSTCTRL_PPE1 | MTK_RSTCTRL_PPE2 | MTK_SRAM)
- 
- struct mtk_tx_dma_desc_info {
- 	dma_addr_t	addr;
-@@ -1314,6 +1371,9 @@ struct mtk_mac {
- 	struct device_node		*of_node;
- 	struct phylink			*phylink;
- 	struct phylink_config		phylink_config;
-+	struct phylink_pcs		*sgmii_pcs;
-+	struct phylink_pcs		*usxgmii_pcs;
-+	struct phy			*pextp;
- 	struct mtk_eth			*hw;
- 	struct mtk_hw_stats		*hw_stats;
- 	__be32				hwlro_ip[MTK_MAX_LRO_IP_CNT];
-@@ -1437,6 +1497,19 @@ static inline u32 mtk_get_ib2_multicast_
- 	return MTK_FOE_IB2_MULTICAST;
- }
- 
-+static inline bool mtk_interface_mode_is_xgmii(phy_interface_t interface)
-+{
-+	switch (interface) {
-+	case PHY_INTERFACE_MODE_INTERNAL:
-+	case PHY_INTERFACE_MODE_USXGMII:
-+	case PHY_INTERFACE_MODE_10GBASER:
-+	case PHY_INTERFACE_MODE_5GBASER:
-+		return true;
-+	default:
-+		return false;
-+	}
-+}
-+
- /* read the hardware status register */
- void mtk_stats_update_mac(struct mtk_mac *mac);
- 
-@@ -1445,8 +1518,10 @@ u32 mtk_r32(struct mtk_eth *eth, unsigne
- u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned int reg);
- 
- int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id);
-+int mtk_gmac_2p5gphy_path_setup(struct mtk_eth *eth, int mac_id);
- int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id);
- int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id);
-+int mtk_gmac_usxgmii_path_setup(struct mtk_eth *eth, int mac_id);
- 
- int mtk_eth_offload_init(struct mtk_eth *eth);
- int mtk_eth_setup_tc(struct net_device *dev, enum tc_setup_type type,
diff --git a/target/linux/generic/pending-6.1/738-net-ethernet-mtk_eth_soc-set-coherent-mask-to-get-PP.patch b/target/linux/generic/pending-6.1/738-net-ethernet-mtk_eth_soc-set-coherent-mask-to-get-PP.patch
deleted file mode 100644
index b598d15866ef..000000000000
--- a/target/linux/generic/pending-6.1/738-net-ethernet-mtk_eth_soc-set-coherent-mask-to-get-PP.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From dee3f591103910c8d8b2a6d57879ccd2a4be4b10 Mon Sep 17 00:00:00 2001
-Message-ID: <dee3f591103910c8d8b2a6d57879ccd2a4be4b10.1706067287.git.daniel@makrotopia.org>
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 24 Jan 2024 03:19:49 +0000
-Subject: [PATCH net] net: ethernet: mtk_eth_soc: set coherent mask to get PPE
- working
-To: Felix Fietkau <nbd@nbd.name>,
-    Sean Wang <sean.wang@mediatek.com>,
-    Mark Lee <Mark-MC.Lee@mediatek.com>,
-    Lorenzo Bianconi <lorenzo@kernel.org>,
-    David S. Miller <davem@davemloft.net>,
-    Eric Dumazet <edumazet@google.com>,
-    Jakub Kicinski <kuba@kernel.org>,
-    Paolo Abeni <pabeni@redhat.com>,
-    Matthias Brugger <matthias.bgg@gmail.com>,
-    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>,
-    Daniel Golle <daniel@makrotopia.org>,
-    netdev@vger.kernel.org,
-    linux-kernel@vger.kernel.org,
-    linux-arm-kernel@lists.infradead.org,
-    linux-mediatek@lists.infradead.org
-
-Set DMA coherent mask to 32-bit which makes PPE offloading engine start
-working on BPi-R4 which got 4 GiB of RAM.
-
-Fixes: 2d75891ebc09 ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988")
-Suggested-by: Elad Yifee <eladwf@users.github.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4963,7 +4963,10 @@ static int mtk_probe(struct platform_dev
- 	}
- 
- 	if (MTK_HAS_CAPS(eth->soc->caps, MTK_36BIT_DMA)) {
--		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(36));
-+		err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(36));
-+		if (!err)
-+			err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-+
- 		if (err) {
- 			dev_err(&pdev->dev, "Wrong DMA config\n");
- 			return -EINVAL;
diff --git a/target/linux/generic/pending-6.1/739-01-dt-bindings-phy-mediatek-xfi-tphy-add-new-bindings.patch b/target/linux/generic/pending-6.1/739-01-dt-bindings-phy-mediatek-xfi-tphy-add-new-bindings.patch
deleted file mode 100644
index 1f1c40b1d915..000000000000
--- a/target/linux/generic/pending-6.1/739-01-dt-bindings-phy-mediatek-xfi-tphy-add-new-bindings.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From patchwork Thu Feb  1 21:52:20 2024
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 13541842
-Date: Thu, 1 Feb 2024 21:52:20 +0000
-From: Daniel Golle <daniel@makrotopia.org>
-To: Bc-bocun Chen <bc-bocun.chen@mediatek.com>,
-	Steven Liu <steven.liu@mediatek.com>,
-	John Crispin <john@phrozen.org>,
-	Chunfeng Yun <chunfeng.yun@mediatek.com>,
-	Vinod Koul <vkoul@kernel.org>,
-	Kishon Vijay Abraham I <kishon@kernel.org>,
-	Rob Herring <robh@kernel.org>,
-	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
-	Conor Dooley <conor+dt@kernel.org>,
-	Daniel Golle <daniel@makrotopia.org>,
-	Qingfang Deng <dqfext@gmail.com>,
-	SkyLake Huang <SkyLake.Huang@mediatek.com>,
-	Matthias Brugger <matthias.bgg@gmail.com>,
-	AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>,
-	Philipp Zabel <p.zabel@pengutronix.de>,
-	linux-arm-kernel@lists.infradead.org,
-	linux-mediatek@lists.infradead.org, linux-phy@lists.infradead.org,
-	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
-	netdev@vger.kernel.org
-Subject: [PATCH 1/2] dt-bindings: phy: mediatek,xfi-tphy: add new bindings
-Message-ID: 
- <702afb0c1246d95c90b22e57105304028bdd3083.1706823233.git.daniel@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-List-Id: Linux Phy Mailing list <linux-phy.lists.infradead.org>
-
-Add bindings for the MediaTek XFI T-PHY Ethernet SerDes PHY found in the
-MediaTek MT7988 SoC which can operate at various interfaces modes:
-
-via USXGMII PCS:
- * USXGMII
- * 10GBase-R
- * 5GBase-R
-
-via LynxI SGMII PCS:
- * 2500Base-X
- * 1000Base-X
- * Cisco SGMII (MAC side)
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- .../bindings/phy/mediatek,xfi-tphy.yaml       | 80 +++++++++++++++++++
- 1 file changed, 80 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/phy/mediatek,xfi-tphy.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/mediatek,xfi-tphy.yaml
-@@ -0,0 +1,80 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/phy/mediatek,xfi-tphy.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek XFI T-PHY
-+
-+maintainers:
-+  - Daniel Golle <daniel@makrotopia.org>
-+
-+description:
-+  The MediaTek XFI SerDes T-PHY provides the physical SerDes lanes
-+  used by the (10G/5G) USXGMII PCS and (1G/2.5G) LynxI PCS found in
-+  MediaTek's 10G-capabale SoCs.
-+
-+properties:
-+  $nodename:
-+    pattern: "^phy@[0-9a-f]+$"
-+
-+  compatible:
-+    const: mediatek,mt7988-xfi-tphy
-+
-+  reg:
-+    maxItems: 1
-+
-+  clocks:
-+    items:
-+      - description: XFI PHY clock
-+      - description: XFI register clock
-+
-+  clock-names:
-+    items:
-+      - const: xfipll
-+      - const: topxtal
-+
-+  resets:
-+    items:
-+      - description: PEXTP reset
-+
-+  mediatek,usxgmii-performance-errata:
-+    $ref: /schemas/types.yaml#/definitions/flag
-+    description:
-+      One instance of the T-PHY on MT7988 suffers from a performance
-+      problem in 10GBase-R mode which needs a work-around in the driver.
-+      The work-around is enabled using this flag.
-+
-+  "#phy-cells":
-+    const: 0
-+
-+required:
-+  - compatible
-+  - reg
-+  - clocks
-+  - clock-names
-+  - resets
-+  - "#phy-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/clock/mediatek,mt7988-clk.h>
-+    soc {
-+      #address-cells = <2>;
-+      #size-cells = <2>;
-+
-+      phy@11f20000 {
-+        compatible = "mediatek,mt7988-xfi-tphy";
-+        reg = <0 0x11f20000 0 0x10000>;
-+        clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
-+                 <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
-+        clock-names = "xfipll", "topxtal";
-+        resets = <&watchdog 14>;
-+        mediatek,usxgmii-performance-errata;
-+        #phy-cells = <0>;
-+      };
-+    };
-+
-+...
diff --git a/target/linux/generic/pending-6.1/739-02-phy-add-driver-for-MediaTek-XFI-T-PHY.patch b/target/linux/generic/pending-6.1/739-02-phy-add-driver-for-MediaTek-XFI-T-PHY.patch
deleted file mode 100644
index 1aa36fcd3dc4..000000000000
--- a/target/linux/generic/pending-6.1/739-02-phy-add-driver-for-MediaTek-XFI-T-PHY.patch
+++ /dev/null
@@ -1,498 +0,0 @@
-From patchwork Thu Feb  1 21:53:06 2024
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 13541843
-Date: Thu, 1 Feb 2024 21:53:06 +0000
-From: Daniel Golle <daniel@makrotopia.org>
-To: Bc-bocun Chen <bc-bocun.chen@mediatek.com>,
-	Chunfeng Yun <chunfeng.yun@mediatek.com>,
-	Vinod Koul <vkoul@kernel.org>,
-	Kishon Vijay Abraham I <kishon@kernel.org>,
-	Rob Herring <robh@kernel.org>,
-	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
-	Conor Dooley <conor+dt@kernel.org>,
-	Daniel Golle <daniel@makrotopia.org>,
-	Qingfang Deng <dqfext@gmail.com>,
-	SkyLake Huang <SkyLake.Huang@mediatek.com>,
-	Matthias Brugger <matthias.bgg@gmail.com>,
-	AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>,
-	Philipp Zabel <p.zabel@pengutronix.de>,
-	linux-arm-kernel@lists.infradead.org,
-	linux-mediatek@lists.infradead.org, linux-phy@lists.infradead.org,
-	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
-	netdev@vger.kernel.org
-Subject: [PATCH 2/2] phy: add driver for MediaTek XFI T-PHY
-Message-ID: 
- <dd6b40ea1f7f8459a9a2cfe7fa60c1108332ade6.1706823233.git.daniel@makrotopia.org>
-References: 
- <702afb0c1246d95c90b22e57105304028bdd3083.1706823233.git.daniel@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-In-Reply-To: 
- <702afb0c1246d95c90b22e57105304028bdd3083.1706823233.git.daniel@makrotopia.org>
-List-Id: Linux Phy Mailing list <linux-phy.lists.infradead.org>
-
-Add driver for MediaTek's XFI T-PHY, 10 Gigabit/s Ethernet SerDes PHY
-which can be found in the MT7988 SoC.
-
-The PHY can operates only in PHY_MODE_ETHERNET, the submode is one of
-PHY_INTERFACE_MODE_* corresponding to the supported modes:
-
- * USXGMII                 \
- * 10GBase-R                }- USXGMII PCS - XGDM  \
- * 5GBase-R                /                        \
-                                                     }- Ethernet MAC
- * 2500Base-X              \                        /
- * 1000Base-X               }- LynxI PCS - GDM     /
- * Cisco SGMII (MAC side)  /
-
-In order to work-around a performance issue present on the first of
-two XFI T-PHYs present in MT7988, special tuning is applied which can be
-selected by adding the 'mediatek,usxgmii-performance-errata' property to
-the device tree node.
-
-There is no documentation for most registers used for the
-analog/tuning part, however, most of the registers have been partially
-reverse-engineered from MediaTek's SDK implementation (an opaque
-sequence of 32-bit register writes) and descriptions for all relevant
-digital registers and bits such as resets and muxes have been supplied
-by MediaTek.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- MAINTAINERS                             |   1 +
- drivers/phy/mediatek/Kconfig            |  12 +
- drivers/phy/mediatek/Makefile           |   1 +
- drivers/phy/mediatek/phy-mtk-xfi-tphy.c | 392 ++++++++++++++++++++++++
- 4 files changed, 406 insertions(+)
- create mode 100644 drivers/phy/mediatek/phy-mtk-xfi-tphy.c
-
---- a/drivers/phy/mediatek/Kconfig
-+++ b/drivers/phy/mediatek/Kconfig
-@@ -13,6 +13,18 @@ config PHY_MTK_PCIE
- 	  callback for PCIe GEN3 port, it supports software efuse
- 	  initialization.
- 
-+config PHY_MTK_XFI_TPHY
-+	tristate "MediaTek XFI T-PHY Driver"
-+	depends on ARCH_MEDIATEK || COMPILE_TEST
-+	depends on OF && OF_ADDRESS
-+	depends on HAS_IOMEM
-+	select GENERIC_PHY
-+	help
-+	  Say 'Y' here to add support for MediaTek XFI T-PHY driver.
-+	  The driver provides access to the Ethernet SerDes T-PHY supporting
-+	  1GE and 2.5GE modes via the LynxI PCS, and 5GE and 10GE modes
-+	  via the USXGMII PCS found in MediaTek SoCs with 10G Ethernet.
-+
- config PHY_MTK_TPHY
- 	tristate "MediaTek T-PHY Driver"
- 	depends on ARCH_MEDIATEK || COMPILE_TEST
---- a/drivers/phy/mediatek/Makefile
-+++ b/drivers/phy/mediatek/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_PHY_MTK_PCIE)		+= phy-mtk-p
- obj-$(CONFIG_PHY_MTK_TPHY)		+= phy-mtk-tphy.o
- obj-$(CONFIG_PHY_MTK_UFS)		+= phy-mtk-ufs.o
- obj-$(CONFIG_PHY_MTK_XSPHY)		+= phy-mtk-xsphy.o
-+obj-$(CONFIG_PHY_MTK_XFI_TPHY)		+= phy-mtk-xfi-tphy.o
- 
- phy-mtk-hdmi-drv-y			:= phy-mtk-hdmi.o
- phy-mtk-hdmi-drv-y			+= phy-mtk-hdmi-mt2701.o
---- /dev/null
-+++ b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
-@@ -0,0 +1,393 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later
-+/* MediaTek 10GE SerDes PHY driver
-+ *
-+ * Copyright (c) 2024 Daniel Golle <daniel@makrotopia.org>
-+ *                    Bc-bocun Chen <bc-bocun.chen@mediatek.com>
-+ * based on mtk_usxgmii.c found in MediaTek's SDK released under GPL-2.0
-+ * Copyright (c) 2022 MediaTek Inc.
-+ * Author: Henry Yen <henry.yen@mediatek.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/reset.h>
-+#include <linux/phy.h>
-+#include <linux/phy/phy.h>
-+
-+#define MTK_XFI_TPHY_NUM_CLOCKS		2
-+
-+#define REG_DIG_GLB_70			0x0070
-+#define  XTP_PCS_RX_EQ_IN_PROGRESS(x)	FIELD_PREP(GENMASK(25, 24), (x))
-+#define  XTP_PCS_MODE_MASK		GENMASK(17, 16)
-+#define  XTP_PCS_MODE(x)		FIELD_PREP(GENMASK(17, 16), (x))
-+#define  XTP_PCS_RST_B			BIT(15)
-+#define  XTP_FRC_PCS_RST_B		BIT(14)
-+#define  XTP_PCS_PWD_SYNC_MASK		GENMASK(13, 12)
-+#define  XTP_PCS_PWD_SYNC(x)		FIELD_PREP(XTP_PCS_PWD_SYNC_MASK, (x))
-+#define  XTP_PCS_PWD_ASYNC_MASK		GENMASK(11, 10)
-+#define  XTP_PCS_PWD_ASYNC(x)		FIELD_PREP(XTP_PCS_PWD_ASYNC_MASK, (x))
-+#define  XTP_FRC_PCS_PWD_ASYNC		BIT(8)
-+#define  XTP_PCS_UPDT			BIT(4)
-+#define  XTP_PCS_IN_FR_RG		BIT(0)
-+
-+#define REG_DIG_GLB_F4			0x00f4
-+#define  XFI_DPHY_PCS_SEL		BIT(0)
-+#define   XFI_DPHY_PCS_SEL_SGMII	FIELD_PREP(XFI_DPHY_PCS_SEL, 1)
-+#define   XFI_DPHY_PCS_SEL_USXGMII	FIELD_PREP(XFI_DPHY_PCS_SEL, 0)
-+#define  XFI_DPHY_AD_SGDT_FRC_EN	BIT(5)
-+
-+#define REG_DIG_LN_TRX_40		0x3040
-+#define  XTP_LN_FRC_TX_DATA_EN		BIT(29)
-+#define  XTP_LN_TX_DATA_EN		BIT(28)
-+
-+#define REG_DIG_LN_TRX_B0		0x30b0
-+#define  XTP_LN_FRC_TX_MACCK_EN		BIT(5)
-+#define  XTP_LN_TX_MACCK_EN		BIT(4)
-+
-+#define REG_ANA_GLB_D0			0x90d0
-+#define  XTP_GLB_USXGMII_SEL_MASK	GENMASK(3, 1)
-+#define  XTP_GLB_USXGMII_SEL(x)		FIELD_PREP(GENMASK(3, 1), (x))
-+#define  XTP_GLB_USXGMII_EN		BIT(0)
-+
-+struct mtk_xfi_tphy {
-+	void __iomem		*base;
-+	struct device		*dev;
-+	struct reset_control	*reset;
-+	struct clk_bulk_data	clocks[MTK_XFI_TPHY_NUM_CLOCKS];
-+	bool			da_war;
-+};
-+
-+static void mtk_xfi_tphy_write(struct mtk_xfi_tphy *xfi_tphy, u16 reg,
-+			       u32 value)
-+{
-+	iowrite32(value, xfi_tphy->base + reg);
-+}
-+
-+static void mtk_xfi_tphy_rmw(struct mtk_xfi_tphy *xfi_tphy, u16 reg,
-+			     u32 clr, u32 set)
-+{
-+	u32 val;
-+
-+	val = ioread32(xfi_tphy->base + reg);
-+	val &= ~clr;
-+	val |= set;
-+	iowrite32(val, xfi_tphy->base + reg);
-+}
-+
-+static void mtk_xfi_tphy_set(struct mtk_xfi_tphy *xfi_tphy, u16 reg,
-+			     u32 set)
-+{
-+	mtk_xfi_tphy_rmw(xfi_tphy, reg, 0, set);
-+}
-+
-+static void mtk_xfi_tphy_clear(struct mtk_xfi_tphy *xfi_tphy, u16 reg,
-+			       u32 clr)
-+{
-+	mtk_xfi_tphy_rmw(xfi_tphy, reg, clr, 0);
-+}
-+
-+static void mtk_xfi_tphy_setup(struct mtk_xfi_tphy *xfi_tphy,
-+			       phy_interface_t interface)
-+{
-+	bool is_2p5g = (interface == PHY_INTERFACE_MODE_2500BASEX);
-+	bool is_1g = (interface == PHY_INTERFACE_MODE_1000BASEX ||
-+		      interface == PHY_INTERFACE_MODE_SGMII);
-+	bool is_10g = (interface == PHY_INTERFACE_MODE_10GBASER ||
-+		       interface == PHY_INTERFACE_MODE_USXGMII);
-+	bool is_5g = (interface == PHY_INTERFACE_MODE_5GBASER);
-+	bool is_xgmii = (is_10g || is_5g);
-+
-+	dev_dbg(xfi_tphy->dev, "setting up for mode %s\n", phy_modes(interface));
-+
-+	/* Setup PLL setting */
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x9024, 0x100000, is_10g ? 0x0 : 0x100000);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x2020, 0x202000, is_5g ? 0x202000 : 0x0);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x2030, 0x500, is_1g ? 0x0 : 0x500);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x2034, 0xa00, is_1g ? 0x0 : 0xa00);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x2040, 0x340000, is_1g ? 0x200000 :
-+							     0x140000);
-+
-+	/* Setup RXFE BW setting */
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x50f0, 0xc10, is_1g ? 0x410 :
-+							  is_5g ? 0x800 : 0x400);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x50e0, 0x4000, is_5g ? 0x0 : 0x4000);
-+
-+	/* Setup RX CDR setting */
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x506c, 0x30000, is_5g ? 0x0 : 0x30000);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x5070, 0x670000, is_5g ? 0x620000 : 0x50000);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x5074, 0x180000, is_5g ? 0x180000 : 0x0);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x5078, 0xf000400, is_5g ? 0x8000000 :
-+							      0x7000400);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x507c, 0x5000500, is_5g ? 0x4000400 :
-+							      0x1000100);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x5080, 0x1410, is_1g ? 0x400 :
-+							   is_5g ? 0x1010 : 0x0);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x5084, 0x30300, is_1g ? 0x30300 :
-+							    is_5g ? 0x30100 :
-+								    0x100);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x5088, 0x60200, is_1g ? 0x20200 :
-+							 is_5g ? 0x40000 :
-+								 0x20000);
-+
-+	/* Setting RXFE adaptation range setting */
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x50e4, 0xc0000, is_5g ? 0x0 : 0xc0000);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x50e8, 0x40000, is_5g ? 0x0 : 0x40000);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x50ec, 0xa00, is_1g ? 0x200 : 0x800);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x50a8, 0xee0000, is_5g ? 0x800000 :
-+							     0x6e0000);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x6004, 0x190000, is_5g ? 0x0 : 0x190000);
-+	if (is_10g)
-+		mtk_xfi_tphy_write(xfi_tphy, 0x00f8, 0x01423342);
-+	else if (is_5g)
-+		mtk_xfi_tphy_write(xfi_tphy, 0x00f8, 0x00a132a1);
-+	else if (is_2p5g)
-+		mtk_xfi_tphy_write(xfi_tphy, 0x00f8, 0x009c329c);
-+	else
-+		mtk_xfi_tphy_write(xfi_tphy, 0x00f8, 0x00fa32fa);
-+
-+	/* Force SGDT_OUT off and select PCS */
-+	mtk_xfi_tphy_rmw(xfi_tphy, REG_DIG_GLB_F4,
-+			 XFI_DPHY_AD_SGDT_FRC_EN | XFI_DPHY_PCS_SEL,
-+			 XFI_DPHY_AD_SGDT_FRC_EN |
-+			 (is_xgmii ? XFI_DPHY_PCS_SEL_USXGMII :
-+				     XFI_DPHY_PCS_SEL_SGMII));
-+
-+
-+	/* Force GLB_CKDET_OUT */
-+	mtk_xfi_tphy_set(xfi_tphy, 0x0030, 0xc00);
-+
-+	/* Force AEQ on */
-+	mtk_xfi_tphy_write(xfi_tphy, REG_DIG_GLB_70,
-+			   XTP_PCS_RX_EQ_IN_PROGRESS(2) |
-+			   XTP_PCS_PWD_SYNC(2) |
-+			   XTP_PCS_PWD_ASYNC(2));
-+
-+	usleep_range(1, 5);
-+	writel(XTP_LN_FRC_TX_DATA_EN, xfi_tphy->base + REG_DIG_LN_TRX_40);
-+
-+	/* Setup TX DA default value */
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x30b0, 0x30, 0x20);
-+	mtk_xfi_tphy_write(xfi_tphy, 0x3028, 0x00008a01);
-+	mtk_xfi_tphy_write(xfi_tphy, 0x302c, 0x0000a884);
-+	mtk_xfi_tphy_write(xfi_tphy, 0x3024, 0x00083002);
-+
-+	/* Setup RG default value */
-+	if (is_xgmii) {
-+		mtk_xfi_tphy_write(xfi_tphy, 0x3010, 0x00022220);
-+		mtk_xfi_tphy_write(xfi_tphy, 0x5064, 0x0f020a01);
-+		mtk_xfi_tphy_write(xfi_tphy, 0x50b4, 0x06100600);
-+		if (interface == PHY_INTERFACE_MODE_USXGMII)
-+			mtk_xfi_tphy_write(xfi_tphy, 0x3048, 0x40704000);
-+		else
-+			mtk_xfi_tphy_write(xfi_tphy, 0x3048, 0x47684100);
-+	} else {
-+		mtk_xfi_tphy_write(xfi_tphy, 0x3010, 0x00011110);
-+		mtk_xfi_tphy_write(xfi_tphy, 0x3048, 0x40704000);
-+	}
-+
-+	if (is_1g)
-+		mtk_xfi_tphy_write(xfi_tphy, 0x3064, 0x0000c000);
-+
-+	/* Setup RX EQ initial value */
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x3050, 0xa8000000,
-+			 (interface != PHY_INTERFACE_MODE_10GBASER) ?
-+			  0xa8000000 : 0x0);
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0x3054, 0xaa,
-+			 (interface != PHY_INTERFACE_MODE_10GBASER) ?
-+			  0xaa : 0x0);
-+
-+	if (is_xgmii)
-+		mtk_xfi_tphy_write(xfi_tphy, 0x306c, 0x00000f00);
-+	else if (is_2p5g)
-+		mtk_xfi_tphy_write(xfi_tphy, 0x306c, 0x22000f00);
-+	else
-+		mtk_xfi_tphy_write(xfi_tphy, 0x306c, 0x20200f00);
-+
-+	if (interface == PHY_INTERFACE_MODE_10GBASER && xfi_tphy->da_war)
-+		mtk_xfi_tphy_rmw(xfi_tphy, 0xa008, 0x10000, 0x10000);
-+
-+	mtk_xfi_tphy_rmw(xfi_tphy, 0xa060, 0x50000, is_xgmii ? 0x40000 :
-+							       0x50000);
-+
-+	/* Setup PHYA speed */
-+	mtk_xfi_tphy_rmw(xfi_tphy, REG_ANA_GLB_D0,
-+			 XTP_GLB_USXGMII_SEL_MASK | XTP_GLB_USXGMII_EN,
-+			 is_10g ?  XTP_GLB_USXGMII_SEL(0) :
-+			 is_5g ?   XTP_GLB_USXGMII_SEL(1) :
-+			 is_2p5g ? XTP_GLB_USXGMII_SEL(2) :
-+				   XTP_GLB_USXGMII_SEL(3));
-+	mtk_xfi_tphy_set(xfi_tphy, REG_ANA_GLB_D0, XTP_GLB_USXGMII_EN);
-+
-+	/* Release reset */
-+	mtk_xfi_tphy_set(xfi_tphy, REG_DIG_GLB_70,
-+			 XTP_PCS_RST_B | XTP_FRC_PCS_RST_B);
-+	usleep_range(150, 500);
-+
-+	/* Switch to P0 */
-+	mtk_xfi_tphy_rmw(xfi_tphy, REG_DIG_GLB_70,
-+			 XTP_PCS_PWD_SYNC_MASK |
-+			 XTP_PCS_PWD_ASYNC_MASK,
-+			 XTP_FRC_PCS_PWD_ASYNC |
-+			 XTP_PCS_UPDT | XTP_PCS_IN_FR_RG);
-+	usleep_range(1, 5);
-+
-+	mtk_xfi_tphy_clear(xfi_tphy, REG_DIG_GLB_70, XTP_PCS_UPDT);
-+	usleep_range(15, 50);
-+
-+	if (is_xgmii) {
-+		/* Switch to Gen3 */
-+		mtk_xfi_tphy_rmw(xfi_tphy, REG_DIG_GLB_70,
-+				 XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
-+				 XTP_PCS_MODE(2) | XTP_PCS_UPDT);
-+	} else {
-+		/* Switch to Gen2 */
-+		mtk_xfi_tphy_rmw(xfi_tphy, REG_DIG_GLB_70,
-+				 XTP_PCS_MODE_MASK | XTP_PCS_UPDT,
-+				 XTP_PCS_MODE(1) | XTP_PCS_UPDT);
-+	}
-+	usleep_range(1, 5);
-+
-+	mtk_xfi_tphy_clear(xfi_tphy, REG_DIG_GLB_70, XTP_PCS_UPDT);
-+
-+	usleep_range(100, 500);
-+
-+	/* Enable MAC CK */
-+	mtk_xfi_tphy_set(xfi_tphy, REG_DIG_LN_TRX_B0, XTP_LN_TX_MACCK_EN);
-+	mtk_xfi_tphy_clear(xfi_tphy, REG_DIG_GLB_F4, XFI_DPHY_AD_SGDT_FRC_EN);
-+
-+	/* Enable TX data */
-+	mtk_xfi_tphy_set(xfi_tphy, REG_DIG_LN_TRX_40,
-+			 XTP_LN_FRC_TX_DATA_EN | XTP_LN_TX_DATA_EN);
-+	usleep_range(400, 1000);
-+}
-+
-+static int mtk_xfi_tphy_set_mode(struct phy *phy, enum phy_mode mode, int
-+				 submode)
-+{
-+	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
-+
-+	if (mode != PHY_MODE_ETHERNET)
-+		return -EINVAL;
-+
-+	switch (submode) {
-+	case PHY_INTERFACE_MODE_1000BASEX:
-+	case PHY_INTERFACE_MODE_2500BASEX:
-+	case PHY_INTERFACE_MODE_SGMII:
-+	case PHY_INTERFACE_MODE_5GBASER:
-+	case PHY_INTERFACE_MODE_10GBASER:
-+	case PHY_INTERFACE_MODE_USXGMII:
-+		mtk_xfi_tphy_setup(xfi_tphy, submode);
-+		return 0;
-+	default:
-+		return -EINVAL;
-+	}
-+}
-+
-+static int mtk_xfi_tphy_reset(struct phy *phy)
-+{
-+	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
-+
-+	reset_control_assert(xfi_tphy->reset);
-+	usleep_range(100, 500);
-+	reset_control_deassert(xfi_tphy->reset);
-+	usleep_range(1, 10);
-+
-+	return 0;
-+}
-+
-+static int mtk_xfi_tphy_power_on(struct phy *phy)
-+{
-+	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
-+
-+	return clk_bulk_prepare_enable(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
-+}
-+
-+static int mtk_xfi_tphy_power_off(struct phy *phy)
-+{
-+	struct mtk_xfi_tphy *xfi_tphy = phy_get_drvdata(phy);
-+
-+	clk_bulk_disable_unprepare(MTK_XFI_TPHY_NUM_CLOCKS, xfi_tphy->clocks);
-+
-+	return 0;
-+}
-+
-+static const struct phy_ops mtk_xfi_tphy_ops = {
-+	.power_on	= mtk_xfi_tphy_power_on,
-+	.power_off	= mtk_xfi_tphy_power_off,
-+	.set_mode	= mtk_xfi_tphy_set_mode,
-+	.reset		= mtk_xfi_tphy_reset,
-+	.owner		= THIS_MODULE,
-+};
-+
-+static int mtk_xfi_tphy_probe(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	struct phy_provider *phy_provider;
-+	struct mtk_xfi_tphy *xfi_tphy;
-+	struct phy *phy;
-+
-+	if (!np)
-+		return -ENODEV;
-+
-+	xfi_tphy = devm_kzalloc(&pdev->dev, sizeof(*xfi_tphy), GFP_KERNEL);
-+	if (!xfi_tphy)
-+		return -ENOMEM;
-+
-+	xfi_tphy->base = devm_of_iomap(&pdev->dev, np, 0, NULL);
-+	if (!xfi_tphy->base)
-+		return -EIO;
-+
-+	xfi_tphy->dev = &pdev->dev;
-+
-+	xfi_tphy->clocks[0].id = "topxtal";
-+	xfi_tphy->clocks[0].clk = devm_clk_get(&pdev->dev, xfi_tphy->clocks[0].id);
-+	if (IS_ERR(xfi_tphy->clocks[0].clk))
-+		return PTR_ERR(xfi_tphy->clocks[0].clk);
-+
-+	xfi_tphy->clocks[1].id = "xfipll";
-+	xfi_tphy->clocks[1].clk = devm_clk_get(&pdev->dev, xfi_tphy->clocks[1].id);
-+	if (IS_ERR(xfi_tphy->clocks[1].clk))
-+		return PTR_ERR(xfi_tphy->clocks[1].clk);
-+
-+	xfi_tphy->reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-+	if (IS_ERR(xfi_tphy->reset))
-+		return PTR_ERR(xfi_tphy->reset);
-+
-+	xfi_tphy->da_war = of_property_read_bool(np,
-+						 "mediatek,usxgmii-performance-errata");
-+
-+	phy = devm_phy_create(&pdev->dev, NULL, &mtk_xfi_tphy_ops);
-+	if (IS_ERR(phy))
-+		return PTR_ERR(phy);
-+
-+	phy_set_drvdata(phy, xfi_tphy);
-+
-+	phy_provider = devm_of_phy_provider_register(&pdev->dev,
-+						     of_phy_simple_xlate);
-+
-+	return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id mtk_xfi_tphy_match[] = {
-+	{ .compatible = "mediatek,mt7988-xfi-tphy", },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(of, mtk_xfi_tphy_match);
-+
-+static struct platform_driver mtk_xfi_tphy_driver = {
-+	.probe = mtk_xfi_tphy_probe,
-+	.driver = {
-+		.name = "mtk-xfi-tphy",
-+		.of_match_table = mtk_xfi_tphy_match,
-+	},
-+};
-+module_platform_driver(mtk_xfi_tphy_driver);
-+
-+MODULE_DESCRIPTION("MediaTek XFI T-PHY driver");
-+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
-+MODULE_AUTHOR("Bc-bocun Chen <bc-bocun.chen@mediatek.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/pending-6.1/739-03-net-pcs-pcs-mtk-lynxi-add-platform-driver-for-MT7988.patch b/target/linux/generic/pending-6.1/739-03-net-pcs-pcs-mtk-lynxi-add-platform-driver-for-MT7988.patch
deleted file mode 100644
index adb95e9587f1..000000000000
--- a/target/linux/generic/pending-6.1/739-03-net-pcs-pcs-mtk-lynxi-add-platform-driver-for-MT7988.patch
+++ /dev/null
@@ -1,371 +0,0 @@
-From 4b1a2716299c0e96a698044aebf3f80513509ae7 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 12 Dec 2023 03:47:18 +0000
-Subject: [PATCH 3/5] net: pcs: pcs-mtk-lynxi: add platform driver for MT7988
-
-Introduce a proper platform MFD driver for the LynxI (H)SGMII PCS which
-is going to initially be used for the MT7988 SoC.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/net/pcs/pcs-mtk-lynxi.c   | 227 ++++++++++++++++++++++++++++--
- include/linux/pcs/pcs-mtk-lynxi.h |  11 ++
- 2 files changed, 227 insertions(+), 11 deletions(-)
-
---- a/drivers/net/pcs/pcs-mtk-lynxi.c
-+++ b/drivers/net/pcs/pcs-mtk-lynxi.c
-@@ -1,6 +1,6 @@
- // SPDX-License-Identifier: GPL-2.0
- // Copyright (c) 2018-2019 MediaTek Inc.
--/* A library for MediaTek SGMII circuit
-+/* A library and platform driver for the MediaTek LynxI SGMII circuit
-  *
-  * Author: Sean Wang <sean.wang@mediatek.com>
-  * Author: Alexander Couzens <lynxis@fe80.eu>
-@@ -8,11 +8,17 @@
-  *
-  */
- 
-+#include <linux/clk.h>
- #include <linux/mdio.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/mutex.h>
- #include <linux/of.h>
-+#include <linux/of_platform.h>
- #include <linux/pcs/pcs-mtk-lynxi.h>
- #include <linux/phylink.h>
-+#include <linux/platform_device.h>
- #include <linux/regmap.h>
-+#include <linux/reset.h>
- 
- /* SGMII subsystem config registers */
- /* BMCR (low 16) BMSR (high 16) */
-@@ -65,6 +71,8 @@
- #define SGMII_PN_SWAP_MASK		GENMASK(1, 0)
- #define SGMII_PN_SWAP_TX_RX		(BIT(0) | BIT(1))
- 
-+#define MTK_NETSYS_V3_AMA_RGC3		0x128
-+
- /* struct mtk_pcs_lynxi -  This structure holds each sgmii regmap andassociated
-  *                         data
-  * @regmap:                The register map pointing at the range used to setup
-@@ -74,15 +82,29 @@
-  * @interface:             Currently configured interface mode
-  * @pcs:                   Phylink PCS structure
-  * @flags:                 Flags indicating hardware properties
-+ * @rstc:                  Reset controller
-+ * @sgmii_sel:             SGMII Register Clock
-+ * @sgmii_rx:              SGMII RX Clock
-+ * @sgmii_tx:              SGMII TX Clock
-+ * @node:                  List node
-  */
- struct mtk_pcs_lynxi {
- 	struct regmap		*regmap;
-+	struct device		*dev;
- 	u32			ana_rgc3;
- 	phy_interface_t		interface;
- 	struct			phylink_pcs pcs;
- 	u32			flags;
-+	struct reset_control	*rstc;
-+	struct clk		*sgmii_sel;
-+	struct clk		*sgmii_rx;
-+	struct clk		*sgmii_tx;
-+	struct list_head	node;
- };
- 
-+static LIST_HEAD(mtk_pcs_lynxi_instances);
-+static DEFINE_MUTEX(instance_mutex);
-+
- static struct mtk_pcs_lynxi *pcs_to_mtk_pcs_lynxi(struct phylink_pcs *pcs)
- {
- 	return container_of(pcs, struct mtk_pcs_lynxi, pcs);
-@@ -102,6 +124,17 @@ static void mtk_pcs_lynxi_get_state(stru
- 					 FIELD_GET(SGMII_LPA, adv));
- }
- 
-+static void mtk_sgmii_reset(struct mtk_pcs_lynxi *mpcs)
-+{
-+	if (!mpcs->rstc)
-+		return;
-+
-+	reset_control_assert(mpcs->rstc);
-+	udelay(100);
-+	reset_control_deassert(mpcs->rstc);
-+	mdelay(1);
-+}
-+
- static int mtk_pcs_lynxi_config(struct phylink_pcs *pcs, unsigned int neg_mode,
- 				phy_interface_t interface,
- 				const unsigned long *advertising,
-@@ -148,6 +181,7 @@ static int mtk_pcs_lynxi_config(struct p
- 				SGMII_PHYA_PWD);
- 
- 		/* Reset SGMII PCS state */
-+		mtk_sgmii_reset(mpcs);
- 		regmap_set_bits(mpcs->regmap, SGMSYS_RESERVED_0,
- 				SGMII_SW_RESET);
- 
-@@ -234,10 +268,29 @@ static void mtk_pcs_lynxi_link_up(struct
- 	}
- }
- 
-+static int mtk_pcs_lynxi_enable(struct phylink_pcs *pcs)
-+{
-+	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
-+
-+	if (mpcs->sgmii_tx && mpcs->sgmii_rx) {
-+		clk_prepare_enable(mpcs->sgmii_rx);
-+		clk_prepare_enable(mpcs->sgmii_tx);
-+	}
-+
-+	return 0;
-+}
-+
- static void mtk_pcs_lynxi_disable(struct phylink_pcs *pcs)
- {
- 	struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs);
- 
-+	regmap_set_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, SGMII_PHYA_PWD);
-+
-+	if (mpcs->sgmii_tx && mpcs->sgmii_rx) {
-+		clk_disable_unprepare(mpcs->sgmii_tx);
-+		clk_disable_unprepare(mpcs->sgmii_rx);
-+	}
-+
- 	mpcs->interface = PHY_INTERFACE_MODE_NA;
- }
- 
-@@ -247,11 +300,12 @@ static const struct phylink_pcs_ops mtk_
- 	.pcs_an_restart = mtk_pcs_lynxi_restart_an,
- 	.pcs_link_up = mtk_pcs_lynxi_link_up,
- 	.pcs_disable = mtk_pcs_lynxi_disable,
-+	.pcs_enable = mtk_pcs_lynxi_enable,
- };
- 
--struct phylink_pcs *mtk_pcs_lynxi_create(struct device *dev,
--					 struct regmap *regmap, u32 ana_rgc3,
--					 u32 flags)
-+static struct phylink_pcs *mtk_pcs_lynxi_init(struct device *dev, struct regmap *regmap,
-+					      u32 ana_rgc3, u32 flags,
-+					      struct mtk_pcs_lynxi *prealloc)
- {
- 	struct mtk_pcs_lynxi *mpcs;
- 	u32 id, ver;
-@@ -259,29 +313,33 @@ struct phylink_pcs *mtk_pcs_lynxi_create
- 
- 	ret = regmap_read(regmap, SGMSYS_PCS_DEVICE_ID, &id);
- 	if (ret < 0)
--		return NULL;
-+		return ERR_PTR(ret);
- 
- 	if (id != SGMII_LYNXI_DEV_ID) {
- 		dev_err(dev, "unknown PCS device id %08x\n", id);
--		return NULL;
-+		return ERR_PTR(-ENODEV);
- 	}
- 
- 	ret = regmap_read(regmap, SGMSYS_PCS_SCRATCH, &ver);
- 	if (ret < 0)
--		return NULL;
-+		return ERR_PTR(ret);
- 
- 	ver = FIELD_GET(SGMII_DEV_VERSION, ver);
- 	if (ver != 0x1) {
- 		dev_err(dev, "unknown PCS device version %04x\n", ver);
--		return NULL;
-+		return ERR_PTR(-ENODEV);
- 	}
- 
- 	dev_dbg(dev, "MediaTek LynxI SGMII PCS (id 0x%08x, ver 0x%04x)\n", id,
- 		ver);
- 
--	mpcs = kzalloc(sizeof(*mpcs), GFP_KERNEL);
--	if (!mpcs)
--		return NULL;
-+	if (prealloc) {
-+		mpcs = prealloc;
-+	} else {
-+		mpcs = kzalloc(sizeof(*mpcs), GFP_KERNEL);
-+		if (!mpcs)
-+			return ERR_PTR(-ENOMEM);
-+	};
- 
- 	mpcs->ana_rgc3 = ana_rgc3;
- 	mpcs->regmap = regmap;
-@@ -292,6 +350,13 @@ struct phylink_pcs *mtk_pcs_lynxi_create
- 	mpcs->interface = PHY_INTERFACE_MODE_NA;
- 
- 	return &mpcs->pcs;
-+};
-+
-+struct phylink_pcs *mtk_pcs_lynxi_create(struct device *dev,
-+					 struct regmap *regmap, u32 ana_rgc3,
-+					 u32 flags)
-+{
-+	return mtk_pcs_lynxi_init(dev, regmap, ana_rgc3, flags, NULL);
- }
- EXPORT_SYMBOL(mtk_pcs_lynxi_create);
- 
-@@ -304,4 +369,144 @@ void mtk_pcs_lynxi_destroy(struct phylin
- }
- EXPORT_SYMBOL(mtk_pcs_lynxi_destroy);
- 
-+static int mtk_pcs_lynxi_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct device_node *np = dev->of_node;
-+	struct mtk_pcs_lynxi *mpcs;
-+	struct phylink_pcs *pcs;
-+	struct regmap *regmap;
-+	u32 flags = 0;
-+
-+	mpcs = devm_kzalloc(dev, sizeof(*mpcs), GFP_KERNEL);
-+	if (!mpcs)
-+		return -ENOMEM;
-+
-+	mpcs->dev = dev;
-+	regmap = syscon_node_to_regmap(np->parent);
-+	if (IS_ERR(regmap))
-+		return PTR_ERR(regmap);
-+
-+	if (of_property_read_bool(np->parent, "mediatek,pnswap"))
-+		flags |= MTK_SGMII_FLAG_PN_SWAP;
-+
-+	mpcs->rstc = of_reset_control_get_shared(np->parent, NULL);
-+	if (IS_ERR(mpcs->rstc))
-+		return PTR_ERR(mpcs->rstc);
-+
-+	reset_control_deassert(mpcs->rstc);
-+	mpcs->sgmii_sel = devm_clk_get_enabled(dev, "sgmii_sel");
-+	if (IS_ERR(mpcs->sgmii_sel))
-+		return PTR_ERR(mpcs->sgmii_sel);
-+
-+	mpcs->sgmii_rx = devm_clk_get(dev, "sgmii_rx");
-+	if (IS_ERR(mpcs->sgmii_rx))
-+		return PTR_ERR(mpcs->sgmii_rx);
-+
-+	mpcs->sgmii_tx = devm_clk_get(dev, "sgmii_tx");
-+	if (IS_ERR(mpcs->sgmii_tx))
-+		return PTR_ERR(mpcs->sgmii_tx);
-+
-+	pcs = mtk_pcs_lynxi_init(dev, regmap, (uintptr_t)of_device_get_match_data(dev),
-+				 flags, mpcs);
-+	if (IS_ERR(pcs))
-+		return PTR_ERR(pcs);
-+
-+	regmap_set_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, SGMII_PHYA_PWD);
-+
-+	platform_set_drvdata(pdev, mpcs);
-+
-+	mutex_lock(&instance_mutex);
-+	list_add_tail(&mpcs->node, &mtk_pcs_lynxi_instances);
-+	mutex_unlock(&instance_mutex);
-+
-+	return 0;
-+}
-+
-+static int mtk_pcs_lynxi_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct mtk_pcs_lynxi *cur, *tmp;
-+
-+	mutex_lock(&instance_mutex);
-+	list_for_each_entry_safe(cur, tmp, &mtk_pcs_lynxi_instances, node)
-+		if (cur->dev == dev) {
-+			list_del(&cur->node);
-+			kfree(cur);
-+			break;
-+		}
-+	mutex_unlock(&instance_mutex);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id mtk_pcs_lynxi_of_match[] = {
-+	{ .compatible = "mediatek,mt7988-sgmii", .data = (void *)MTK_NETSYS_V3_AMA_RGC3 },
-+	{ /* sentinel */ },
-+};
-+MODULE_DEVICE_TABLE(of, mtk_pcs_lynxi_of_match);
-+
-+struct phylink_pcs *mtk_pcs_lynxi_get(struct device *dev, struct device_node *np)
-+{
-+	struct platform_device *pdev;
-+	struct mtk_pcs_lynxi *mpcs;
-+
-+	if (!np)
-+		return NULL;
-+
-+	if (!of_device_is_available(np))
-+		return ERR_PTR(-ENODEV);
-+
-+	if (!of_match_node(mtk_pcs_lynxi_of_match, np))
-+		return ERR_PTR(-EINVAL);
-+
-+	pdev = of_find_device_by_node(np);
-+	if (!pdev || !platform_get_drvdata(pdev)) {
-+		if (pdev)
-+			put_device(&pdev->dev);
-+		return ERR_PTR(-EPROBE_DEFER);
-+	}
-+
-+	mpcs = platform_get_drvdata(pdev);
-+	device_link_add(dev, mpcs->dev, DL_FLAG_AUTOREMOVE_CONSUMER);
-+
-+	return &mpcs->pcs;
-+}
-+EXPORT_SYMBOL(mtk_pcs_lynxi_get);
-+
-+void mtk_pcs_lynxi_put(struct phylink_pcs *pcs)
-+{
-+	struct mtk_pcs_lynxi *cur, *mpcs = NULL;
-+
-+	if (!pcs)
-+		return;
-+
-+	mutex_lock(&instance_mutex);
-+	list_for_each_entry(cur, &mtk_pcs_lynxi_instances, node)
-+		if (pcs == &cur->pcs) {
-+			mpcs = cur;
-+			break;
-+		}
-+	mutex_unlock(&instance_mutex);
-+
-+	if (WARN_ON(!mpcs))
-+		return;
-+
-+	put_device(mpcs->dev);
-+}
-+EXPORT_SYMBOL(mtk_pcs_lynxi_put);
-+
-+static struct platform_driver mtk_pcs_lynxi_driver = {
-+	.driver = {
-+		.name			= "mtk-pcs-lynxi",
-+		.suppress_bind_attrs	= true,
-+		.of_match_table		= mtk_pcs_lynxi_of_match,
-+	},
-+	.probe = mtk_pcs_lynxi_probe,
-+	.remove = mtk_pcs_lynxi_remove,
-+};
-+module_platform_driver(mtk_pcs_lynxi_driver);
-+
-+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
-+MODULE_DESCRIPTION("MediaTek LynxI HSGMII PCS");
- MODULE_LICENSE("GPL");
---- a/include/linux/pcs/pcs-mtk-lynxi.h
-+++ b/include/linux/pcs/pcs-mtk-lynxi.h
-@@ -10,4 +10,15 @@ struct phylink_pcs *mtk_pcs_lynxi_create
- 					 struct regmap *regmap,
- 					 u32 ana_rgc3, u32 flags);
- void mtk_pcs_lynxi_destroy(struct phylink_pcs *pcs);
-+
-+#if IS_ENABLED(CONFIG_PCS_MTK_LYNXI)
-+struct phylink_pcs *mtk_pcs_lynxi_get(struct device *dev, struct device_node *np);
-+void mtk_pcs_lynxi_put(struct phylink_pcs *pcs);
-+#else
-+static inline struct phylink_pcs *mtk_pcs_lynxi_get(struct device *dev, struct device_node *np)
-+{
-+	return NULL;
-+}
-+static inline void mtk_pcs_lynxi_put(struct phylink_pcs *pcs) { }
-+#endif /* IS_ENABLED(CONFIG_PCS_MTK_LYNXI) */
- #endif
diff --git a/target/linux/generic/pending-6.1/739-04-dt-bindings-net-pcs-add-bindings-for-MediaTek-USXGMI.patch b/target/linux/generic/pending-6.1/739-04-dt-bindings-net-pcs-add-bindings-for-MediaTek-USXGMI.patch
deleted file mode 100644
index 215bd2ca2ef4..000000000000
--- a/target/linux/generic/pending-6.1/739-04-dt-bindings-net-pcs-add-bindings-for-MediaTek-USXGMI.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 7d88d79c0f65b27a92754d7547f7af098b3de67b Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 12 Dec 2023 03:47:31 +0000
-Subject: [PATCH 4/5] dt-bindings: net: pcs: add bindings for MediaTek USXGMII
- PCS
-
-MediaTek's USXGMII can be found in the MT7988 SoC. We need to access
-it in order to configure and monitor the Ethernet SerDes link in
-USXGMII, 10GBase-R and 5GBase-R mode. By including a wrapped
-legacy 1000Base-X/2500Base-X/Cisco SGMII LynxI PCS as well, those
-interface modes are also available.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- .../bindings/net/pcs/mediatek,usxgmii.yaml    | 60 +++++++++++++++++++
- 1 file changed, 60 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,usxgmii.yaml
-@@ -0,0 +1,60 @@
-+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/pcs/mediatek,usxgmii.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek USXGMII PCS
-+
-+maintainers:
-+  - Daniel Golle <daniel@makrotopia.org>
-+
-+description:
-+  The MediaTek USXGMII PCS provides physical link control and status
-+  for USXGMII, 10GBase-R and 5GBase-R links on the SerDes interfaces
-+  provided by the PEXTP PHY.
-+  In order to also support legacy 2500Base-X, 1000Base-X and Cisco
-+  SGMII an existing mediatek,*-sgmiisys LynxI PCS is wrapped to
-+  provide those interfaces modes on the same SerDes interfaces shared
-+  with the USXGMII PCS.
-+
-+properties:
-+  $nodename:
-+    pattern: "^pcs@[0-9a-f]+$"
-+
-+  compatible:
-+    const: mediatek,mt7988-usxgmiisys
-+
-+  reg:
-+    maxItems: 1
-+
-+  clocks:
-+    items:
-+      - description: USXGMII top-level clock
-+
-+  resets:
-+    items:
-+      - description: XFI reset
-+
-+required:
-+  - compatible
-+  - reg
-+  - clocks
-+  - resets
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    #include <dt-bindings/clock/mediatek,mt7988-clk.h>
-+    #define MT7988_TOPRGU_XFI0_GRST 12
-+    soc {
-+      #address-cells = <2>;
-+      #size-cells = <2>;
-+        usxgmiisys0: pcs@10080000 {
-+          compatible = "mediatek,mt7988-usxgmiisys";
-+          reg = <0 0x10080000 0 0x1000>;
-+          clocks = <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>;
-+          resets = <&watchdog MT7988_TOPRGU_XFI0_GRST>;
-+        };
-+    };
diff --git a/target/linux/generic/pending-6.1/739-05-net-pcs-add-driver-for-MediaTek-USXGMII-PCS.patch b/target/linux/generic/pending-6.1/739-05-net-pcs-add-driver-for-MediaTek-USXGMII-PCS.patch
deleted file mode 100644
index fd1bba3089a0..000000000000
--- a/target/linux/generic/pending-6.1/739-05-net-pcs-add-driver-for-MediaTek-USXGMII-PCS.patch
+++ /dev/null
@@ -1,547 +0,0 @@
-From dde0e95fff92e9f5009f3bea75278e0e34a48822 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 12 Dec 2023 03:47:47 +0000
-Subject: [PATCH 5/5] net: pcs: add driver for MediaTek USXGMII PCS
-
-Add driver for USXGMII PCS found in the MediaTek MT7988 SoC and supporting
-USXGMII, 10GBase-R and 5GBase-R interface modes.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- MAINTAINERS                         |   2 +
- drivers/net/pcs/Kconfig             |  11 +
- drivers/net/pcs/Makefile            |   1 +
- drivers/net/pcs/pcs-mtk-usxgmii.c   | 456 ++++++++++++++++++++++++++++
- include/linux/pcs/pcs-mtk-usxgmii.h |  27 ++
- 5 files changed, 497 insertions(+)
- create mode 100644 drivers/net/pcs/pcs-mtk-usxgmii.c
- create mode 100644 include/linux/pcs/pcs-mtk-usxgmii.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -12941,7 +12941,9 @@ M:	Daniel Golle <daniel@makrotopia.org>
- L:	netdev@vger.kernel.org
- S:	Maintained
- F:	drivers/net/pcs/pcs-mtk-lynxi.c
-+F:	drivers/net/pcs/pcs-mtk-usxgmii.c
- F:	include/linux/pcs/pcs-mtk-lynxi.h
-+F:	include/linux/pcs/pcs-mtk-usxgmii.h
- 
- MEDIATEK I2C CONTROLLER DRIVER
- M:	Qii Wang <qii.wang@mediatek.com>
---- a/drivers/net/pcs/Kconfig
-+++ b/drivers/net/pcs/Kconfig
-@@ -18,6 +18,17 @@ config PCS_LYNX
- 	  This module provides helpers to phylink for managing the Lynx PCS
- 	  which is part of the Layerscape and QorIQ Ethernet SERDES.
- 
-+config PCS_MTK_USXGMII
-+	tristate "MediaTek USXGMII PCS"
-+	select PCS_MTK_LYNXI
-+	select PHY_MTK_PEXTP
-+	select PHYLINK
-+	help
-+	  This module provides a driver for MediaTek's USXGMII PCS supporting
-+	  10GBase-R, 5GBase-R and USXGMII interface modes.
-+	  1000Base-X, 2500Base-X and Cisco SGMII are supported on the same
-+	  differential pairs via an embedded LynxI PHY.
-+
- config PCS_RZN1_MIIC
- 	tristate "Renesas RZ/N1 MII converter"
- 	depends on OF && (ARCH_RZN1 || COMPILE_TEST)
---- a/drivers/net/pcs/Makefile
-+++ b/drivers/net/pcs/Makefile
-@@ -8,3 +8,4 @@ obj-$(CONFIG_PCS_LYNX)		+= pcs-lynx.o
- obj-$(CONFIG_PCS_RZN1_MIIC)	+= pcs-rzn1-miic.o
- obj-$(CONFIG_PCS_ALTERA_TSE)	+= pcs-altera-tse.o
- obj-$(CONFIG_PCS_MTK_LYNXI)	+= pcs-mtk-lynxi.o
-+obj-$(CONFIG_PCS_MTK_USXGMII)	+= pcs-mtk-usxgmii.o
---- /dev/null
-+++ b/drivers/net/pcs/pcs-mtk-usxgmii.c
-@@ -0,0 +1,456 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Author: Henry Yen <henry.yen@mediatek.com>
-+ *         Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/io.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/mdio.h>
-+#include <linux/mutex.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/reset.h>
-+#include <linux/pcs/pcs-mtk-usxgmii.h>
-+#include <linux/platform_device.h>
-+
-+/* USXGMII subsystem config registers */
-+/* Register to control speed */
-+#define RG_PHY_TOP_SPEED_CTRL1			0x80c
-+#define USXGMII_RATE_UPDATE_MODE		BIT(31)
-+#define USXGMII_MAC_CK_GATED			BIT(29)
-+#define USXGMII_IF_FORCE_EN			BIT(28)
-+#define USXGMII_RATE_ADAPT_MODE			GENMASK(10, 8)
-+#define USXGMII_RATE_ADAPT_MODE_X1		0
-+#define USXGMII_RATE_ADAPT_MODE_X2		1
-+#define USXGMII_RATE_ADAPT_MODE_X4		2
-+#define USXGMII_RATE_ADAPT_MODE_X10		3
-+#define USXGMII_RATE_ADAPT_MODE_X100		4
-+#define USXGMII_RATE_ADAPT_MODE_X5		5
-+#define USXGMII_RATE_ADAPT_MODE_X50		6
-+#define USXGMII_XFI_RX_MODE			GENMASK(6, 4)
-+#define USXGMII_XFI_TX_MODE			GENMASK(2, 0)
-+#define USXGMII_XFI_MODE_10G			0
-+#define USXGMII_XFI_MODE_5G			1
-+#define USXGMII_XFI_MODE_2P5G			3
-+
-+/* Register to control PCS AN */
-+#define RG_PCS_AN_CTRL0				0x810
-+#define USXGMII_AN_RESTART			BIT(31)
-+#define USXGMII_AN_SYNC_CNT			GENMASK(30, 11)
-+#define USXGMII_AN_ENABLE			BIT(0)
-+
-+#define RG_PCS_AN_CTRL2				0x818
-+#define USXGMII_LINK_TIMER_IDLE_DETECT		GENMASK(29, 20)
-+#define USXGMII_LINK_TIMER_COMP_ACK_DETECT	GENMASK(19, 10)
-+#define USXGMII_LINK_TIMER_AN_RESTART		GENMASK(9, 0)
-+
-+/* Register to read PCS AN status */
-+#define RG_PCS_AN_STS0				0x81c
-+#define USXGMII_LPA				GENMASK(15, 0)
-+#define USXGMII_LPA_LATCH			BIT(31)
-+
-+/* Register to read PCS link status */
-+#define RG_PCS_RX_STATUS0			0x904
-+#define RG_PCS_RX_STATUS_UPDATE			BIT(16)
-+#define RG_PCS_RX_LINK_STATUS			BIT(2)
-+
-+/* struct mtk_usxgmii_pcs - This structure holds each usxgmii PCS
-+ * @pcs:		Phylink PCS structure
-+ * @dev:		Pointer to device structure
-+ * @base:		IO memory to access PCS hardware
-+ * @clk:		Pointer to USXGMII clk
-+ * @reset:		Pointer to USXGMII reset control
-+ * @interface:		Currently selected interface mode
-+ * @neg_mode:		Currently used phylink neg_mode
-+ * @node:		List node
-+ */
-+struct mtk_usxgmii_pcs {
-+	struct phylink_pcs		pcs;
-+	struct device			*dev;
-+	void __iomem			*base;
-+	struct clk			*clk;
-+	struct reset_control		*reset;
-+	phy_interface_t			interface;
-+	unsigned int			neg_mode;
-+	struct list_head		node;
-+};
-+
-+static LIST_HEAD(mtk_usxgmii_pcs_instances);
-+static DEFINE_MUTEX(instance_mutex);
-+
-+static u32 mtk_r32(struct mtk_usxgmii_pcs *mpcs, unsigned int reg)
-+{
-+	return ioread32(mpcs->base + reg);
-+}
-+
-+static void mtk_m32(struct mtk_usxgmii_pcs *mpcs, unsigned int reg, u32 mask, u32 set)
-+{
-+	u32 val;
-+
-+	val = ioread32(mpcs->base + reg);
-+	val &= ~mask;
-+	val |= set;
-+	iowrite32(val, mpcs->base + reg);
-+}
-+
-+static struct mtk_usxgmii_pcs *pcs_to_mtk_usxgmii_pcs(struct phylink_pcs *pcs)
-+{
-+	return container_of(pcs, struct mtk_usxgmii_pcs, pcs);
-+}
-+
-+static void mtk_usxgmii_reset(struct mtk_usxgmii_pcs *mpcs)
-+{
-+	reset_control_assert(mpcs->reset);
-+	udelay(100);
-+	reset_control_deassert(mpcs->reset);
-+
-+	mdelay(10);
-+}
-+
-+static int mtk_usxgmii_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
-+				  phy_interface_t interface,
-+				  const unsigned long *advertising,
-+				  bool permit_pause_to_mac)
-+{
-+	struct mtk_usxgmii_pcs *mpcs = pcs_to_mtk_usxgmii_pcs(pcs);
-+	unsigned int an_ctrl = 0, link_timer = 0, xfi_mode = 0, adapt_mode = 0;
-+	bool mode_changed = false;
-+
-+	if (interface == PHY_INTERFACE_MODE_USXGMII) {
-+		an_ctrl = FIELD_PREP(USXGMII_AN_SYNC_CNT, 0x1FF) | USXGMII_AN_ENABLE;
-+		link_timer = FIELD_PREP(USXGMII_LINK_TIMER_IDLE_DETECT, 0x7B) |
-+			     FIELD_PREP(USXGMII_LINK_TIMER_COMP_ACK_DETECT, 0x7B) |
-+			     FIELD_PREP(USXGMII_LINK_TIMER_AN_RESTART, 0x7B);
-+		xfi_mode = FIELD_PREP(USXGMII_XFI_RX_MODE, USXGMII_XFI_MODE_10G) |
-+			   FIELD_PREP(USXGMII_XFI_TX_MODE, USXGMII_XFI_MODE_10G);
-+	} else if (interface == PHY_INTERFACE_MODE_10GBASER) {
-+		an_ctrl = FIELD_PREP(USXGMII_AN_SYNC_CNT, 0x1FF);
-+		link_timer = FIELD_PREP(USXGMII_LINK_TIMER_IDLE_DETECT, 0x7B) |
-+			     FIELD_PREP(USXGMII_LINK_TIMER_COMP_ACK_DETECT, 0x7B) |
-+			     FIELD_PREP(USXGMII_LINK_TIMER_AN_RESTART, 0x7B);
-+		xfi_mode = FIELD_PREP(USXGMII_XFI_RX_MODE, USXGMII_XFI_MODE_10G) |
-+			   FIELD_PREP(USXGMII_XFI_TX_MODE, USXGMII_XFI_MODE_10G);
-+		adapt_mode = USXGMII_RATE_UPDATE_MODE;
-+	} else if (interface == PHY_INTERFACE_MODE_5GBASER) {
-+		an_ctrl = FIELD_PREP(USXGMII_AN_SYNC_CNT, 0xFF);
-+		link_timer = FIELD_PREP(USXGMII_LINK_TIMER_IDLE_DETECT, 0x3D) |
-+			     FIELD_PREP(USXGMII_LINK_TIMER_COMP_ACK_DETECT, 0x3D) |
-+			     FIELD_PREP(USXGMII_LINK_TIMER_AN_RESTART, 0x3D);
-+		xfi_mode = FIELD_PREP(USXGMII_XFI_RX_MODE, USXGMII_XFI_MODE_5G) |
-+			   FIELD_PREP(USXGMII_XFI_TX_MODE, USXGMII_XFI_MODE_5G);
-+		adapt_mode = USXGMII_RATE_UPDATE_MODE;
-+	} else {
-+		return -EINVAL;
-+	}
-+
-+	adapt_mode |= FIELD_PREP(USXGMII_RATE_ADAPT_MODE, USXGMII_RATE_ADAPT_MODE_X1);
-+
-+	if (mpcs->interface != interface) {
-+		mpcs->interface = interface;
-+		mode_changed = true;
-+	}
-+
-+	mtk_usxgmii_reset(mpcs);
-+
-+	/* Setup USXGMII AN ctrl */
-+	mtk_m32(mpcs, RG_PCS_AN_CTRL0,
-+		USXGMII_AN_SYNC_CNT | USXGMII_AN_ENABLE,
-+		an_ctrl);
-+
-+	mtk_m32(mpcs, RG_PCS_AN_CTRL2,
-+		USXGMII_LINK_TIMER_IDLE_DETECT |
-+		USXGMII_LINK_TIMER_COMP_ACK_DETECT |
-+		USXGMII_LINK_TIMER_AN_RESTART,
-+		link_timer);
-+
-+	mpcs->neg_mode = neg_mode;
-+
-+	/* Gated MAC CK */
-+	mtk_m32(mpcs, RG_PHY_TOP_SPEED_CTRL1,
-+		USXGMII_MAC_CK_GATED, USXGMII_MAC_CK_GATED);
-+
-+	/* Enable interface force mode */
-+	mtk_m32(mpcs, RG_PHY_TOP_SPEED_CTRL1,
-+		USXGMII_IF_FORCE_EN, USXGMII_IF_FORCE_EN);
-+
-+	/* Setup USXGMII adapt mode */
-+	mtk_m32(mpcs, RG_PHY_TOP_SPEED_CTRL1,
-+		USXGMII_RATE_UPDATE_MODE | USXGMII_RATE_ADAPT_MODE,
-+		adapt_mode);
-+
-+	/* Setup USXGMII speed */
-+	mtk_m32(mpcs, RG_PHY_TOP_SPEED_CTRL1,
-+		USXGMII_XFI_RX_MODE | USXGMII_XFI_TX_MODE,
-+		xfi_mode);
-+
-+	usleep_range(1, 10);
-+
-+	/* Un-gated MAC CK */
-+	mtk_m32(mpcs, RG_PHY_TOP_SPEED_CTRL1, USXGMII_MAC_CK_GATED, 0);
-+
-+	usleep_range(1, 10);
-+
-+	/* Disable interface force mode for the AN mode */
-+	if (an_ctrl & USXGMII_AN_ENABLE)
-+		mtk_m32(mpcs, RG_PHY_TOP_SPEED_CTRL1, USXGMII_IF_FORCE_EN, 0);
-+
-+	return mode_changed;
-+}
-+
-+static void mtk_usxgmii_pcs_get_fixed_speed(struct mtk_usxgmii_pcs *mpcs,
-+					    struct phylink_link_state *state)
-+{
-+	u32 val = mtk_r32(mpcs, RG_PHY_TOP_SPEED_CTRL1);
-+	int speed;
-+
-+	/* Calculate speed from interface speed and rate adapt mode */
-+	switch (FIELD_GET(USXGMII_XFI_RX_MODE, val)) {
-+	case USXGMII_XFI_MODE_10G:
-+		speed = 10000;
-+		break;
-+	case USXGMII_XFI_MODE_5G:
-+		speed = 5000;
-+		break;
-+	case USXGMII_XFI_MODE_2P5G:
-+		speed = 2500;
-+		break;
-+	default:
-+		state->speed = SPEED_UNKNOWN;
-+		return;
-+	}
-+
-+	switch (FIELD_GET(USXGMII_RATE_ADAPT_MODE, val)) {
-+	case USXGMII_RATE_ADAPT_MODE_X100:
-+		speed /= 100;
-+		break;
-+	case USXGMII_RATE_ADAPT_MODE_X50:
-+		speed /= 50;
-+		break;
-+	case USXGMII_RATE_ADAPT_MODE_X10:
-+		speed /= 10;
-+		break;
-+	case USXGMII_RATE_ADAPT_MODE_X5:
-+		speed /= 5;
-+		break;
-+	case USXGMII_RATE_ADAPT_MODE_X4:
-+		speed /= 4;
-+		break;
-+	case USXGMII_RATE_ADAPT_MODE_X2:
-+		speed /= 2;
-+		break;
-+	case USXGMII_RATE_ADAPT_MODE_X1:
-+		break;
-+	default:
-+		state->speed = SPEED_UNKNOWN;
-+		return;
-+	}
-+
-+	state->speed = speed;
-+	state->duplex = DUPLEX_FULL;
-+}
-+
-+static void mtk_usxgmii_pcs_get_an_state(struct mtk_usxgmii_pcs *mpcs,
-+					 struct phylink_link_state *state)
-+{
-+	u16 lpa;
-+
-+	/* Refresh LPA by toggling LPA_LATCH */
-+	mtk_m32(mpcs, RG_PCS_AN_STS0, USXGMII_LPA_LATCH, USXGMII_LPA_LATCH);
-+	ndelay(1020);
-+	mtk_m32(mpcs, RG_PCS_AN_STS0, USXGMII_LPA_LATCH, 0);
-+	ndelay(1020);
-+	lpa = FIELD_GET(USXGMII_LPA, mtk_r32(mpcs, RG_PCS_AN_STS0));
-+
-+	phylink_decode_usxgmii_word(state, lpa);
-+}
-+
-+static void mtk_usxgmii_pcs_get_state(struct phylink_pcs *pcs,
-+				      struct phylink_link_state *state)
-+{
-+	struct mtk_usxgmii_pcs *mpcs = pcs_to_mtk_usxgmii_pcs(pcs);
-+
-+	/* Refresh USXGMII link status by toggling RG_PCS_AN_STATUS_UPDATE */
-+	mtk_m32(mpcs, RG_PCS_RX_STATUS0, RG_PCS_RX_STATUS_UPDATE,
-+		RG_PCS_RX_STATUS_UPDATE);
-+	ndelay(1020);
-+	mtk_m32(mpcs, RG_PCS_RX_STATUS0, RG_PCS_RX_STATUS_UPDATE, 0);
-+	ndelay(1020);
-+
-+	/* Read USXGMII link status */
-+	state->link = FIELD_GET(RG_PCS_RX_LINK_STATUS,
-+				mtk_r32(mpcs, RG_PCS_RX_STATUS0));
-+
-+	/* Continuously repeat re-configuration sequence until link comes up */
-+	if (!state->link) {
-+		mtk_usxgmii_pcs_config(pcs, mpcs->neg_mode,
-+				       state->interface, NULL, false);
-+		return;
-+	}
-+
-+	if (FIELD_GET(USXGMII_AN_ENABLE, mtk_r32(mpcs, RG_PCS_AN_CTRL0)))
-+		mtk_usxgmii_pcs_get_an_state(mpcs, state);
-+	else
-+		mtk_usxgmii_pcs_get_fixed_speed(mpcs, state);
-+}
-+
-+static void mtk_usxgmii_pcs_restart_an(struct phylink_pcs *pcs)
-+{
-+	struct mtk_usxgmii_pcs *mpcs = pcs_to_mtk_usxgmii_pcs(pcs);
-+
-+	mtk_m32(mpcs, RG_PCS_AN_CTRL0, USXGMII_AN_RESTART, USXGMII_AN_RESTART);
-+}
-+
-+static void mtk_usxgmii_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
-+				    phy_interface_t interface,
-+				    int speed, int duplex)
-+{
-+	/* Reconfiguring USXGMII to ensure the quality of the RX signal
-+	 * after the line side link up.
-+	 */
-+	mtk_usxgmii_pcs_config(pcs, neg_mode, interface, NULL, false);
-+}
-+
-+static void mtk_usxgmii_pcs_disable(struct phylink_pcs *pcs)
-+{
-+	struct mtk_usxgmii_pcs *mpcs = pcs_to_mtk_usxgmii_pcs(pcs);
-+
-+	mpcs->interface = PHY_INTERFACE_MODE_NA;
-+	mpcs->neg_mode = -1;
-+}
-+
-+static const struct phylink_pcs_ops mtk_usxgmii_pcs_ops = {
-+	.pcs_config = mtk_usxgmii_pcs_config,
-+	.pcs_get_state = mtk_usxgmii_pcs_get_state,
-+	.pcs_an_restart = mtk_usxgmii_pcs_restart_an,
-+	.pcs_link_up = mtk_usxgmii_pcs_link_up,
-+	.pcs_disable = mtk_usxgmii_pcs_disable,
-+};
-+
-+static int mtk_usxgmii_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct mtk_usxgmii_pcs *mpcs;
-+
-+	mpcs = devm_kzalloc(dev, sizeof(*mpcs), GFP_KERNEL);
-+	if (!mpcs)
-+		return -ENOMEM;
-+
-+	mpcs->base = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(mpcs->base))
-+		return PTR_ERR(mpcs->base);
-+
-+	mpcs->dev = dev;
-+	mpcs->pcs.ops = &mtk_usxgmii_pcs_ops;
-+	mpcs->pcs.poll = true;
-+	mpcs->pcs.neg_mode = true;
-+	mpcs->interface = PHY_INTERFACE_MODE_NA;
-+	mpcs->neg_mode = -1;
-+
-+	mpcs->clk = devm_clk_get_enabled(mpcs->dev, NULL);
-+	if (IS_ERR(mpcs->clk))
-+		return PTR_ERR(mpcs->clk);
-+
-+	mpcs->reset = devm_reset_control_get_shared(dev, NULL);
-+	if (IS_ERR(mpcs->reset))
-+		return PTR_ERR(mpcs->reset);
-+
-+	reset_control_deassert(mpcs->reset);
-+
-+	platform_set_drvdata(pdev, mpcs);
-+
-+	mutex_lock(&instance_mutex);
-+	list_add_tail(&mpcs->node, &mtk_usxgmii_pcs_instances);
-+	mutex_unlock(&instance_mutex);
-+
-+	return 0;
-+}
-+
-+static int mtk_usxgmii_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct mtk_usxgmii_pcs *cur, *tmp;
-+
-+	mutex_lock(&instance_mutex);
-+	list_for_each_entry_safe(cur, tmp, &mtk_usxgmii_pcs_instances, node)
-+		if (cur->dev == dev) {
-+			list_del(&cur->node);
-+			break;
-+		}
-+	mutex_unlock(&instance_mutex);
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id mtk_usxgmii_of_mtable[] = {
-+	{ .compatible = "mediatek,mt7988-usxgmiisys" },
-+	{ /* sentinel */ },
-+};
-+MODULE_DEVICE_TABLE(of, mtk_usxgmii_of_mtable);
-+
-+struct phylink_pcs *mtk_usxgmii_pcs_get(struct device *dev, struct device_node *np)
-+{
-+	struct platform_device *pdev;
-+	struct mtk_usxgmii_pcs *mpcs;
-+
-+	if (!np)
-+		return NULL;
-+
-+	if (!of_device_is_available(np))
-+		return ERR_PTR(-ENODEV);
-+
-+	if (!of_match_node(mtk_usxgmii_of_mtable, np))
-+		return ERR_PTR(-EINVAL);
-+
-+	pdev = of_find_device_by_node(np);
-+	if (!pdev || !platform_get_drvdata(pdev)) {
-+		if (pdev)
-+			put_device(&pdev->dev);
-+		return ERR_PTR(-EPROBE_DEFER);
-+	}
-+
-+	mpcs = platform_get_drvdata(pdev);
-+	device_link_add(dev, mpcs->dev, DL_FLAG_AUTOREMOVE_CONSUMER);
-+
-+	return &mpcs->pcs;
-+}
-+EXPORT_SYMBOL(mtk_usxgmii_pcs_get);
-+
-+void mtk_usxgmii_pcs_put(struct phylink_pcs *pcs)
-+{
-+	struct mtk_usxgmii_pcs *cur, *mpcs = NULL;
-+
-+	if (!pcs)
-+		return;
-+
-+	mutex_lock(&instance_mutex);
-+	list_for_each_entry(cur, &mtk_usxgmii_pcs_instances, node)
-+		if (pcs == &cur->pcs) {
-+			mpcs = cur;
-+			break;
-+		}
-+	mutex_unlock(&instance_mutex);
-+
-+	if (WARN_ON(!mpcs))
-+		return;
-+
-+	put_device(mpcs->dev);
-+}
-+EXPORT_SYMBOL(mtk_usxgmii_pcs_put);
-+
-+static struct platform_driver mtk_usxgmii_driver = {
-+	.driver = {
-+		.name			= "mtk_usxgmii",
-+		.suppress_bind_attrs	= true,
-+		.of_match_table		= mtk_usxgmii_of_mtable,
-+	},
-+	.probe = mtk_usxgmii_probe,
-+	.remove = mtk_usxgmii_remove,
-+};
-+module_platform_driver(mtk_usxgmii_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("MediaTek USXGMII PCS driver");
-+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
---- /dev/null
-+++ b/include/linux/pcs/pcs-mtk-usxgmii.h
-@@ -0,0 +1,27 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef __LINUX_PCS_MTK_USXGMII_H
-+#define __LINUX_PCS_MTK_USXGMII_H
-+
-+#include <linux/phylink.h>
-+
-+/**
-+ * mtk_usxgmii_select_pcs() - Get MediaTek PCS instance
-+ * @np:		Pointer to device node indentifying a MediaTek USXGMII PCS
-+ * @mode:	Ethernet PHY interface mode
-+ *
-+ * Return PCS identified by a device node and the PHY interface mode in use
-+ *
-+ * Return:	Pointer to phylink PCS instance of NULL
-+ */
-+#if IS_ENABLED(CONFIG_PCS_MTK_USXGMII)
-+struct phylink_pcs *mtk_usxgmii_pcs_get(struct device *dev, struct device_node *np);
-+void mtk_usxgmii_pcs_put(struct phylink_pcs *pcs);
-+#else
-+static inline struct phylink_pcs *mtk_usxgmii_pcs_get(struct device *dev, struct device_node *np)
-+{
-+	return NULL;
-+}
-+static inline void mtk_usxgmii_pcs_put(struct phylink_pcs *pcs) { }
-+#endif /* IS_ENABLED(CONFIG_PCS_MTK_USXGMII) */
-+
-+#endif /* __LINUX_PCS_MTK_USXGMII_H */
diff --git a/target/linux/generic/pending-6.1/740-net-phy-motorcomm-Add-missing-include.patch b/target/linux/generic/pending-6.1/740-net-phy-motorcomm-Add-missing-include.patch
deleted file mode 100644
index 2a1f908cfb32..000000000000
--- a/target/linux/generic/pending-6.1/740-net-phy-motorcomm-Add-missing-include.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 6f291aa7da199c6486cc229b055dcbcd5cee7a21 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 21 May 2023 22:24:56 +0200
-Subject: [PATCH] net: phy: motorcomm: Add missing include
-
-Directly include linux/bitfield.h which provides FIELD_PREP.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/phy/motorcomm.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/phy/motorcomm.c
-+++ b/drivers/net/phy/motorcomm.c
-@@ -6,6 +6,7 @@
-  * Author: Frank <Frank.Sae@motor-comm.com>
-  */
- 
-+#include <linux/bitfield.h>
- #include <linux/etherdevice.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
diff --git a/target/linux/generic/pending-6.1/741-net-phy-realtek-support-interrupt-of-RTL8221B.patch b/target/linux/generic/pending-6.1/741-net-phy-realtek-support-interrupt-of-RTL8221B.patch
deleted file mode 100644
index 249ba5c496ca..000000000000
--- a/target/linux/generic/pending-6.1/741-net-phy-realtek-support-interrupt-of-RTL8221B.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From d7943c31d57c11e1a517aa3ce2006fca44866870 Mon Sep 17 00:00:00 2001
-From: Jianhui Zhao <zhaojh329@gmail.com>
-Date: Sun, 24 Sep 2023 22:15:00 +0800
-Subject: [PATCH] net: phy: realtek: add interrupt support for RTL8221B
-
-This commit introduces interrupt support for RTL8221B.
-
-Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
----
- drivers/net/phy/realtek.c | 47 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
---- a/drivers/net/phy/realtek.c
-+++ b/drivers/net/phy/realtek.c
-@@ -982,6 +982,51 @@ static int rtl8221b_config_init(struct p
- 	return 0;
- }
- 
-+static int rtl8221b_ack_interrupt(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	err = phy_read_mmd(phydev, RTL8221B_MMD_PHY_CTRL, 0xa4d4);
-+
-+	return (err < 0) ? err : 0;
-+}
-+
-+static int rtl8221b_config_intr(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
-+		err = rtl8221b_ack_interrupt(phydev);
-+		if (err)
-+			return err;
-+
-+		err = phy_write_mmd(phydev, RTL8221B_MMD_PHY_CTRL, 0xa4d2, 0x7ff);
-+	} else {
-+		err = phy_write_mmd(phydev, RTL8221B_MMD_PHY_CTRL, 0xa4d2, 0x0);
-+		if (err)
-+			return err;
-+
-+		err = rtl8221b_ack_interrupt(phydev);
-+	}
-+
-+	return err;
-+}
-+
-+static irqreturn_t rtl8221b_handle_interrupt(struct phy_device *phydev)
-+{
-+	int err;
-+
-+	err = rtl8221b_ack_interrupt(phydev);
-+	if (err) {
-+		phy_error(phydev);
-+		return IRQ_NONE;
-+	}
-+
-+	phy_trigger_machine(phydev);
-+
-+	return IRQ_HANDLED;
-+}
-+
- static struct phy_driver realtek_drvs[] = {
- 	{
- 		PHY_ID_MATCH_EXACT(0x00008201),
-@@ -1142,6 +1187,8 @@ static struct phy_driver realtek_drvs[]
- 		.get_features   = rtl822x_get_features,
- 		.config_init    = rtl8221b_config_init,
- 		.config_aneg    = rtl822x_config_aneg,
-+		.config_intr	= rtl8221b_config_intr,
-+		.handle_interrupt = rtl8221b_handle_interrupt,
- 		.probe          = rtl822x_probe,
- 		.read_status    = rtl822x_read_status,
- 		.suspend        = genphy_suspend,
diff --git a/target/linux/generic/pending-6.1/742-net-phy-air_en8811h-reset-netdev-rules-when-LED-is-s.patch b/target/linux/generic/pending-6.1/742-net-phy-air_en8811h-reset-netdev-rules-when-LED-is-s.patch
deleted file mode 100644
index 500567b4ed05..000000000000
--- a/target/linux/generic/pending-6.1/742-net-phy-air_en8811h-reset-netdev-rules-when-LED-is-s.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 9be9a00adfac8118b6d685e71696f83187308c66 Mon Sep 17 00:00:00 2001
-Message-ID: <9be9a00adfac8118b6d685e71696f83187308c66.1715125851.git.daniel@makrotopia.org>
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 7 May 2024 22:43:30 +0100
-Subject: [PATCH net] net: phy: air_en8811h: reset netdev rules when LED is set
- manually
-To: Andrew Lunn <andrew@lunn.ch>,
-    Heiner Kallweit <hkallweit1@gmail.com>,
-    Russell King <linux@armlinux.org.uk>,
-    David S. Miller <davem@davemloft.net>,
-    Eric Dumazet <edumazet@google.com>,
-    Jakub Kicinski <kuba@kernel.org>,
-    Paolo Abeni <pabeni@redhat.com>,
-    SkyLake Huang <skylake.huang@mediatek.com>,
-    Eric Woudstra <ericwouds@gmail.com>,
-    netdev@vger.kernel.org,
-    linux-kernel@vger.kernel.org
-
-Setting LED_OFF via the brightness_set should deactivate hw control,
-so make sure netdev trigger rules also get cleared in that case.
-
-Fixes: 71e79430117d ("net: phy: air_en8811h: Add the Airoha EN8811H PHY driver")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
-This is basically a stop-gap measure until unified LED handling has
-been implemented accross all MediaTek and Airoha PHYs.
-See also
-https://patchwork.kernel.org/project/netdevbpf/patch/20240425023325.15586-3-SkyLake.Huang@mediatek.com/
-
- drivers/net/phy/air_en8811h.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/phy/air_en8811h.c
-+++ b/drivers/net/phy/air_en8811h.c
-@@ -544,6 +544,10 @@ static int air_hw_led_on_set(struct phy_
- 
- 	changed |= (priv->led[index].rules != 0);
- 
-+	/* clear netdev trigger rules in case LED_OFF has been set */
-+	if (!on)
-+		priv->led[index].rules = 0;
-+
- 	if (changed)
- 		return phy_modify_mmd(phydev, MDIO_MMD_VEND2,
- 				      AIR_PHY_LED_ON(index),
diff --git a/target/linux/generic/pending-6.1/760-net-core-add-optional-threading-for-backlog-processi.patch b/target/linux/generic/pending-6.1/760-net-core-add-optional-threading-for-backlog-processi.patch
deleted file mode 100644
index 7d5727bda683..000000000000
--- a/target/linux/generic/pending-6.1/760-net-core-add-optional-threading-for-backlog-processi.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 16 Feb 2023 18:39:04 +0100
-Subject: [PATCH] net/core: add optional threading for backlog processing
-
-When dealing with few flows or an imbalance on CPU utilization, static RPS
-CPU assignment can be too inflexible. Add support for enabling threaded NAPI
-for backlog processing in order to allow the scheduler to better balance
-processing. This helps better spread the load across idle CPUs.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -543,6 +543,7 @@ static inline bool napi_complete(struct
- }
- 
- int dev_set_threaded(struct net_device *dev, bool threaded);
-+int backlog_set_threaded(bool threaded);
- 
- /**
-  *	napi_disable - prevent NAPI from scheduling
-@@ -3150,6 +3151,7 @@ struct softnet_data {
- 	unsigned int		processed;
- 	unsigned int		time_squeeze;
- 	unsigned int		received_rps;
-+	unsigned int		process_queue_empty;
- #ifdef CONFIG_RPS
- 	struct softnet_data	*rps_ipi_list;
- #endif
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -4625,7 +4625,7 @@ static int napi_schedule_rps(struct soft
- 	struct softnet_data *mysd = this_cpu_ptr(&softnet_data);
- 
- #ifdef CONFIG_RPS
--	if (sd != mysd) {
-+	if (sd != mysd && !test_bit(NAPI_STATE_THREADED, &sd->backlog.state)) {
- 		sd->rps_ipi_next = mysd->rps_ipi_list;
- 		mysd->rps_ipi_list = sd;
- 
-@@ -5806,6 +5806,8 @@ static DEFINE_PER_CPU(struct work_struct
- /* Network device is going away, flush any packets still pending */
- static void flush_backlog(struct work_struct *work)
- {
-+	unsigned int process_queue_empty;
-+	bool threaded, flush_processq;
- 	struct sk_buff *skb, *tmp;
- 	struct softnet_data *sd;
- 
-@@ -5820,8 +5822,17 @@ static void flush_backlog(struct work_st
- 			input_queue_head_incr(sd);
- 		}
- 	}
-+
-+	threaded = test_bit(NAPI_STATE_THREADED, &sd->backlog.state);
-+	flush_processq = threaded &&
-+			 !skb_queue_empty_lockless(&sd->process_queue);
-+	if (flush_processq)
-+		process_queue_empty = sd->process_queue_empty;
- 	rps_unlock_irq_enable(sd);
- 
-+	if (threaded)
-+		goto out;
-+
- 	skb_queue_walk_safe(&sd->process_queue, skb, tmp) {
- 		if (skb->dev->reg_state == NETREG_UNREGISTERING) {
- 			__skb_unlink(skb, &sd->process_queue);
-@@ -5829,7 +5840,16 @@ static void flush_backlog(struct work_st
- 			input_queue_head_incr(sd);
- 		}
- 	}
-+
-+out:
- 	local_bh_enable();
-+
-+	while (flush_processq) {
-+		msleep(1);
-+		rps_lock_irq_disable(sd);
-+		flush_processq = process_queue_empty == sd->process_queue_empty;
-+		rps_unlock_irq_enable(sd);
-+	}
- }
- 
- static bool flush_required(int cpu)
-@@ -5961,6 +5981,7 @@ static int process_backlog(struct napi_s
- 		}
- 
- 		rps_lock_irq_disable(sd);
-+		sd->process_queue_empty++;
- 		if (skb_queue_empty(&sd->input_pkt_queue)) {
- 			/*
- 			 * Inline a custom version of __napi_complete().
-@@ -5970,7 +5991,8 @@ static int process_backlog(struct napi_s
- 			 * We can use a plain write instead of clear_bit(),
- 			 * and we dont need an smp_mb() memory barrier.
- 			 */
--			napi->state = 0;
-+			napi->state &= ~(NAPIF_STATE_SCHED |
-+					 NAPIF_STATE_SCHED_THREADED);
- 			again = false;
- 		} else {
- 			skb_queue_splice_tail_init(&sd->input_pkt_queue,
-@@ -6386,6 +6408,55 @@ int dev_set_threaded(struct net_device *
- }
- EXPORT_SYMBOL(dev_set_threaded);
- 
-+int backlog_set_threaded(bool threaded)
-+{
-+	static bool backlog_threaded;
-+	int err = 0;
-+	int i;
-+
-+	if (backlog_threaded == threaded)
-+		return 0;
-+
-+	for_each_possible_cpu(i) {
-+		struct softnet_data *sd = &per_cpu(softnet_data, i);
-+		struct napi_struct *n = &sd->backlog;
-+
-+		if (n->thread)
-+			continue;
-+		n->thread = kthread_run(napi_threaded_poll, n, "napi/backlog-%d", i);
-+		if (IS_ERR(n->thread)) {
-+			err = PTR_ERR(n->thread);
-+			pr_err("kthread_run failed with err %d\n", err);
-+			n->thread = NULL;
-+			threaded = false;
-+			break;
-+		}
-+
-+	}
-+
-+	backlog_threaded = threaded;
-+
-+	/* Make sure kthread is created before THREADED bit
-+	 * is set.
-+	 */
-+	smp_mb__before_atomic();
-+
-+	for_each_possible_cpu(i) {
-+		struct softnet_data *sd = &per_cpu(softnet_data, i);
-+		struct napi_struct *n = &sd->backlog;
-+		unsigned long flags;
-+
-+		rps_lock_irqsave(sd, &flags);
-+		if (threaded)
-+			n->state |= NAPIF_STATE_THREADED;
-+		else
-+			n->state &= ~NAPIF_STATE_THREADED;
-+		rps_unlock_irq_restore(sd, &flags);
-+	}
-+
-+	return err;
-+}
-+
- void netif_napi_add_weight(struct net_device *dev, struct napi_struct *napi,
- 			   int (*poll)(struct napi_struct *, int), int weight)
- {
-@@ -11127,6 +11198,9 @@ static int dev_cpu_dead(unsigned int old
- 	raise_softirq_irqoff(NET_TX_SOFTIRQ);
- 	local_irq_enable();
- 
-+	if (test_bit(NAPI_STATE_THREADED, &oldsd->backlog.state))
-+		return 0;
-+
- #ifdef CONFIG_RPS
- 	remsd = oldsd->rps_ipi_list;
- 	oldsd->rps_ipi_list = NULL;
-@@ -11439,6 +11513,7 @@ static int __init net_dev_init(void)
- 		INIT_CSD(&sd->defer_csd, trigger_rx_softirq, sd);
- 		spin_lock_init(&sd->defer_lock);
- 
-+		INIT_LIST_HEAD(&sd->backlog.poll_list);
- 		init_gro_hash(&sd->backlog);
- 		sd->backlog.poll = process_backlog;
- 		sd->backlog.weight = weight_p;
---- a/net/core/sysctl_net_core.c
-+++ b/net/core/sysctl_net_core.c
-@@ -30,6 +30,7 @@ static int min_sndbuf = SOCK_MIN_SNDBUF;
- static int min_rcvbuf = SOCK_MIN_RCVBUF;
- static int max_skb_frags = MAX_SKB_FRAGS;
- static int min_mem_pcpu_rsv = SK_MEMORY_PCPU_RESERVE;
-+static int backlog_threaded;
- 
- static int net_msg_warn;	/* Unused, but still a sysctl */
- 
-@@ -113,6 +114,23 @@ static int rps_sock_flow_sysctl(struct c
- }
- #endif /* CONFIG_RPS */
- 
-+static int backlog_threaded_sysctl(struct ctl_table *table, int write,
-+			       void *buffer, size_t *lenp, loff_t *ppos)
-+{
-+	static DEFINE_MUTEX(backlog_threaded_mutex);
-+	int ret;
-+
-+	mutex_lock(&backlog_threaded_mutex);
-+
-+	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
-+	if (write && !ret)
-+		ret = backlog_set_threaded(backlog_threaded);
-+
-+	mutex_unlock(&backlog_threaded_mutex);
-+
-+	return ret;
-+}
-+
- #ifdef CONFIG_NET_FLOW_LIMIT
- static DEFINE_MUTEX(flow_limit_update_mutex);
- 
-@@ -482,6 +500,15 @@ static struct ctl_table net_core_table[]
- 		.proc_handler	= rps_sock_flow_sysctl
- 	},
- #endif
-+	{
-+		.procname	= "backlog_threaded",
-+		.data		= &backlog_threaded,
-+		.maxlen		= sizeof(unsigned int),
-+		.mode		= 0644,
-+		.proc_handler	= backlog_threaded_sysctl,
-+		.extra1		= SYSCTL_ZERO,
-+		.extra2		= SYSCTL_ONE
-+	},
- #ifdef CONFIG_NET_FLOW_LIMIT
- 	{
- 		.procname	= "flow_limit_cpu_bitmap",
diff --git a/target/linux/generic/pending-6.1/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch b/target/linux/generic/pending-6.1/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
deleted file mode 100644
index 6fa33ee1a81d..000000000000
--- a/target/linux/generic/pending-6.1/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From:   Tobias Waldekranz <tobias@waldekranz.com>
-Subject: [RFC net-next 7/7] net: dsa: mv88e6xxx: Request assisted learning on CPU port
-Date:   Sat, 16 Jan 2021 02:25:15 +0100
-Archived-At: <https://lore.kernel.org/netdev/20210116012515.3152-8-tobias@waldekranz.com/>
-
-While the hardware is capable of performing learning on the CPU port,
-it requires alot of additions to the bridge's forwarding path in order
-to handle multi-destination traffic correctly.
-
-Until that is in place, opt for the next best thing and let DSA sync
-the relevant addresses down to the hardware FDB.
-
-Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
----
- drivers/net/dsa/mv88e6xxx/chip.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/dsa/mv88e6xxx/chip.c
-+++ b/drivers/net/dsa/mv88e6xxx/chip.c
-@@ -7080,6 +7080,7 @@ static int mv88e6xxx_register_switch(str
- 	ds->ops = &mv88e6xxx_switch_ops;
- 	ds->ageing_time_min = chip->info->age_time_coeff;
- 	ds->ageing_time_max = chip->info->age_time_coeff * U8_MAX;
-+	ds->assisted_learning_on_cpu_port = true;
- 
- 	/* Some chips support up to 32, but that requires enabling the
- 	 * 5-bit port mode, which we do not support. 640k^W16 ought to
diff --git a/target/linux/generic/pending-6.1/772-net-dsa-b53-add-support-for-BCM63xx-RGMIIs.patch b/target/linux/generic/pending-6.1/772-net-dsa-b53-add-support-for-BCM63xx-RGMIIs.patch
deleted file mode 100644
index 23859816fa85..000000000000
--- a/target/linux/generic/pending-6.1/772-net-dsa-b53-add-support-for-BCM63xx-RGMIIs.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From patchwork Sun Mar 19 22:08:05 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=
- <noltari@gmail.com>
-X-Patchwork-Id: 13180645
-X-Patchwork-Delegate: kuba@kernel.org
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id A7A46C6FD1F
-	for <netdev@archiver.kernel.org>; Sun, 19 Mar 2023 22:08:15 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S230223AbjCSWIN (ORCPT <rfc822;netdev@archiver.kernel.org>);
-        Sun, 19 Mar 2023 18:08:13 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:32878 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S229565AbjCSWIM (ORCPT
-        <rfc822;netdev@vger.kernel.org>); Sun, 19 Mar 2023 18:08:12 -0400
-Received: from mail-wr1-x42e.google.com (mail-wr1-x42e.google.com
- [IPv6:2a00:1450:4864:20::42e])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 605D3E062;
-        Sun, 19 Mar 2023 15:08:10 -0700 (PDT)
-Received: by mail-wr1-x42e.google.com with SMTP id h17so8695188wrt.8;
-        Sun, 19 Mar 2023 15:08:10 -0700 (PDT)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=gmail.com; s=20210112; t=1679263689;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:from:to:cc:subject:date
-         :message-id:reply-to;
-        bh=GmPK75Q9ZD3h3IYflWYuDwS99V2e532KgDlnNucAoJg=;
-        b=PSdrywW48P4Lq8z9wOSPXFB/ZdO/JfuyiGlw3Gz1Iriy+Smo/cBnJ0Ve9zKkX3AKTO
-         Tr7/g8xhSQX8sU5WAOEPC13uVjKpO4VZsamXHTmMKL4mmfII3K/piAsQcMQkkNpgouab
-         Ci9yr+7ASSmqEUHIbYTM6sl6a47rPwqk3b3DcTIE2CwJsPPNXnpQ/aSVbJAcEdhcZICc
-         X4rAmjrYjcsl8coFIGHHPlrMH9ShekQWxB84vEb6bO1nXOORNPizOHuY1vJ3wa3WgXsx
-         YwlvutMFVIUXfgL2ZwCmQAKWJPiAaFk+CCk3oxSeOYoAzkjcbMyapz9VnooStfvR2aV3
-         k+2g==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20210112; t=1679263689;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc
-         :subject:date:message-id:reply-to;
-        bh=GmPK75Q9ZD3h3IYflWYuDwS99V2e532KgDlnNucAoJg=;
-        b=NGjqrGERyaxRwINtevHaY97h9X9W+1UY62YYwotqwv5+cfvB8myjBbD3WH2WzaqMes
-         o9MMER9RE8/arW3jIVlBv4ORDUuEZ7AeGgy5UbFyQZIPHlp+hJ/sxFrGvYUwamg4Qrr9
-         ojargh8ORsEiMeqaf+5AkmEagNhrrV3ax0pUuWDzbJ3vXGoHjfCetHz5xyNL46dvXBfb
-         l/OZqjv9IYob552uUoUmCy/TbEQDqvmjkFrROFK9gtBNxgxUJkwbyiWIOVsf6RR8OarP
-         f7bbvSJYkvTvzx2u/g0Up7NW5ZyihMGBmDs377M3yW6AnSxW6jlfl30QmMU1aEigYXvy
-         v3mA==
-X-Gm-Message-State: AO0yUKUm1PYmYa4xlHuVD23mZcZm83a+xbhcbs0Xryi3yF/+UnjM4Cho
-        GAfqSh5MZ/rlOAm3Vnpn//9hOG5Lc8vLYg==
-X-Google-Smtp-Source: 
- AK7set+5pTahGGgk1hF/mHGkGBhsMf0//oQjZd4QFHx+HaeSgP5f6q7g0bRUcTX8kRtgHH0T7l1/hQ==
-X-Received: by 2002:a5d:474f:0:b0:2d6:2ae8:70d with SMTP id
- o15-20020a5d474f000000b002d62ae8070dmr2382593wrs.39.1679263688549;
-        Sun, 19 Mar 2023 15:08:08 -0700 (PDT)
-Received: from atlantis.lan (255.red-79-146-124.dynamicip.rima-tde.net.
- [79.146.124.255])
-        by smtp.gmail.com with ESMTPSA id
- d6-20020a5d6dc6000000b002c53f6c7599sm7354727wrz.29.2023.03.19.15.08.07
-        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
-        Sun, 19 Mar 2023 15:08:07 -0700 (PDT)
-From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-To: f.fainelli@gmail.com, jonas.gorski@gmail.com, andrew@lunn.ch,
-        olteanv@gmail.com, davem@davemloft.net, edumazet@google.com,
-        kuba@kernel.org, pabeni@redhat.com, netdev@vger.kernel.org,
-        linux-kernel@vger.kernel.org
-Cc: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-Subject: [PATCH v2] net: dsa: b53: add support for BCM63xx RGMIIs
-Date: Sun, 19 Mar 2023 23:08:05 +0100
-Message-Id: <20230319220805.124024-1-noltari@gmail.com>
-X-Mailer: git-send-email 2.30.2
-In-Reply-To: <20230319183330.761251-1-noltari@gmail.com>
-References: <20230319183330.761251-1-noltari@gmail.com>
-MIME-Version: 1.0
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-X-Patchwork-Delegate: kuba@kernel.org
-
-BCM63xx RGMII ports require additional configuration in order to work.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
----
- v2: add changes suggested by Andrew:
-  - Use a switch statement.
-  - Use dev_dbg() instead of dev_info().
-
- drivers/net/dsa/b53/b53_common.c | 46 ++++++++++++++++++++++++++++++++
- drivers/net/dsa/b53/b53_priv.h   |  1 +
- 2 files changed, 47 insertions(+)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -1209,6 +1209,46 @@ static void b53_force_port_config(struct
- 	b53_write8(dev, B53_CTRL_PAGE, off, reg);
- }
- 
-+static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
-+				  phy_interface_t interface)
-+{
-+	struct b53_device *dev = ds->priv;
-+	u8 rgmii_ctrl = 0, off;
-+
-+	if (port == dev->imp_port)
-+		off = B53_RGMII_CTRL_IMP;
-+	else
-+		off = B53_RGMII_CTRL_P(port);
-+
-+	b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
-+
-+	switch (interface) {
-+	case PHY_INTERFACE_MODE_RGMII_ID:
-+		rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII_RXID:
-+		rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC);
-+		rgmii_ctrl |= RGMII_CTRL_DLL_RXC;
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII_TXID:
-+		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC);
-+		rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
-+		break;
-+	case PHY_INTERFACE_MODE_RGMII:
-+	default:
-+		rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
-+		break;
-+	}
-+
-+	if (port != dev->imp_port)
-+		rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII;
-+
-+	b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
-+
-+	dev_dbg(ds->dev, "Configured port %d for %s\n", port,
-+		phy_modes(interface));
-+}
-+
- static void b53_adjust_link(struct dsa_switch *ds, int port,
- 			    struct phy_device *phydev)
- {
-@@ -1235,6 +1275,9 @@ static void b53_adjust_link(struct dsa_s
- 			      tx_pause, rx_pause);
- 	b53_force_link(dev, port, phydev->link);
- 
-+	if (is63xx(dev) && port >= B53_63XX_RGMII0)
-+		b53_adjust_63xx_rgmii(ds, port, phydev->interface);
-+
- 	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
- 		if (port == dev->imp_port)
- 			off = B53_RGMII_CTRL_IMP;
-@@ -1402,6 +1445,9 @@ void b53_phylink_mac_link_up(struct dsa_
- {
- 	struct b53_device *dev = ds->priv;
- 
-+	if (is63xx(dev) && port >= B53_63XX_RGMII0)
-+		b53_adjust_63xx_rgmii(ds, port, interface);
-+
- 	if (mode == MLO_AN_PHY)
- 		return;
- 
---- a/drivers/net/dsa/b53/b53_priv.h
-+++ b/drivers/net/dsa/b53/b53_priv.h
-@@ -211,6 +211,7 @@ static inline int is58xx(struct b53_devi
- 		dev->chip_id == BCM7278_DEVICE_ID;
- }
- 
-+#define B53_63XX_RGMII0	4
- #define B53_CPU_PORT_25	5
- #define B53_CPU_PORT	8
- 
diff --git a/target/linux/generic/pending-6.1/773-net-dsa-b53-mmap-add-more-63xx-SoCs.patch b/target/linux/generic/pending-6.1/773-net-dsa-b53-mmap-add-more-63xx-SoCs.patch
deleted file mode 100644
index 8ab701ef563a..000000000000
--- a/target/linux/generic/pending-6.1/773-net-dsa-b53-mmap-add-more-63xx-SoCs.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From patchwork Tue Mar 21 17:33:57 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=
- <noltari@gmail.com>
-X-Patchwork-Id: 13183003
-X-Patchwork-Delegate: kuba@kernel.org
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id 823A1C761AF
-	for <netdev@archiver.kernel.org>; Tue, 21 Mar 2023 17:35:06 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S230490AbjCURfE (ORCPT <rfc822;netdev@archiver.kernel.org>);
-        Tue, 21 Mar 2023 13:35:04 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47440 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S230357AbjCURex (ORCPT
-        <rfc822;netdev@vger.kernel.org>); Tue, 21 Mar 2023 13:34:53 -0400
-Received: from mail-wr1-x430.google.com (mail-wr1-x430.google.com
- [IPv6:2a00:1450:4864:20::430])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C9A45559D8;
-        Tue, 21 Mar 2023 10:34:26 -0700 (PDT)
-Received: by mail-wr1-x430.google.com with SMTP id m2so14547588wrh.6;
-        Tue, 21 Mar 2023 10:34:26 -0700 (PDT)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=gmail.com; s=20210112; t=1679420063;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:from:to:cc:subject:date
-         :message-id:reply-to;
-        bh=cUvnluVaZPzfEQB9fMRuYo+4/361t/7po7nyUBBJfxc=;
-        b=F0pa8JmQZ1FeXVtdpCygur8UmLrgKwxCcjaMn312u5zNvsXsEPeCAIDqP2tvNNTwv/
-         UYjaNaoZ77HSvv/gSqeG808AXGyNs1PvLuHZYuUTJRNuLaMixKtkNFi4ypheCdk0WCiE
-         IWz0DIm6ojmdwMqafDUKQ6Qwkv5R0vo8Wh5vpjimEmCelOyMvfuLZNqubsiGqpnCguBp
-         uWlmKh95/VubCGgiGG2xK1IXQayL14ENuWseDds7nVpVK50NycrFgJbL17Bd6qJKYkbo
-         m70IC+9jM0hjwKXpyi6ipCBNcW+1E6JIwILVC04Xi+BTpOGhbUAQ59Yn2hyq7tQM7dzs
-         4PLg==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20210112; t=1679420063;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc
-         :subject:date:message-id:reply-to;
-        bh=cUvnluVaZPzfEQB9fMRuYo+4/361t/7po7nyUBBJfxc=;
-        b=SCX78yTuGjdnE5nuL0p7+kxGnOzsCExsigLdaV+x/JswmwxSpZvxn223i1yM95klj9
-         Rk0RnXqATLF1wZA7L1YmbeZ66zxUwW/osnCjJHPeEF8AGgjK/qawtLl/HJQHN67NaRNQ
-         bDsRn2nWQ2GRTRFpvD+iGRy4uyQCDu9HFxLbn43fBsBmRnXWGPQP5cEb90tL83/Onp4D
-         Lx/XcyZOh9QRfJNhj+G1BAeRCLRA/sdA0W3Ecu5SCFs+LtS6uvLVGWDKEDfnZhYY8Xqf
-         Mx9evWzdW2OorEN2FI6+xTglvnEBcVhHIJ7XEGAhCG6ocgMZeck++774S8RWumWl8xpy
-         /K9Q==
-X-Gm-Message-State: AO0yUKUORAlGfbkNwnYmQnTWcGPqW6sp4g9WfgQmRZGCV+9tCB0OebSP
-        ICq6v4YPmUPNRl/WNnVCbps=
-X-Google-Smtp-Source: 
- AK7set8pFDl8fHRwGPhAguqxIfqnQ4PY+b57IHEsybIaQ/HPNwdJ1cs1+IPBGHe3TL14dTS4aVNpHA==
-X-Received: by 2002:a5d:6991:0:b0:2ce:aab5:f96b with SMTP id
- g17-20020a5d6991000000b002ceaab5f96bmr2965175wru.67.1679420062764;
-        Tue, 21 Mar 2023 10:34:22 -0700 (PDT)
-Received: from atlantis.lan (255.red-79-146-124.dynamicip.rima-tde.net.
- [79.146.124.255])
-        by smtp.gmail.com with ESMTPSA id
- b13-20020a056000054d00b002da1261aa44sm184775wrf.48.2023.03.21.10.34.21
-        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
-        Tue, 21 Mar 2023 10:34:21 -0700 (PDT)
-From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-To: f.fainelli@gmail.com, jonas.gorski@gmail.com, andrew@lunn.ch,
-        olteanv@gmail.com, davem@davemloft.net, edumazet@google.com,
-        kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org,
-        krzysztof.kozlowski+dt@linaro.org, netdev@vger.kernel.org,
-        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-Subject: [PATCH v2 2/4] net: dsa: b53: mmap: add more 63xx SoCs
-Date: Tue, 21 Mar 2023 18:33:57 +0100
-Message-Id: <20230321173359.251778-3-noltari@gmail.com>
-X-Mailer: git-send-email 2.30.2
-In-Reply-To: <20230321173359.251778-1-noltari@gmail.com>
-References: <20230320155024.164523-1-noltari@gmail.com>
- <20230321173359.251778-1-noltari@gmail.com>
-MIME-Version: 1.0
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-X-Patchwork-Delegate: kuba@kernel.org
-
-BCM6318, BCM6362 and BCM63268 are SoCs with a B53 MMAP switch.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
----
- v2: no changes.
-
- drivers/net/dsa/b53/b53_mmap.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/dsa/b53/b53_mmap.c
-+++ b/drivers/net/dsa/b53/b53_mmap.c
-@@ -345,8 +345,11 @@ static void b53_mmap_shutdown(struct pla
- 
- static const struct of_device_id b53_mmap_of_table[] = {
- 	{ .compatible = "brcm,bcm3384-switch" },
-+	{ .compatible = "brcm,bcm6318-switch" },
- 	{ .compatible = "brcm,bcm6328-switch" },
-+	{ .compatible = "brcm,bcm6362-switch" },
- 	{ .compatible = "brcm,bcm6368-switch" },
-+	{ .compatible = "brcm,bcm63268-switch" },
- 	{ .compatible = "brcm,bcm63xx-switch" },
- 	{ /* sentinel */ },
- };
diff --git a/target/linux/generic/pending-6.1/774-net-dsa-b53-mmap-allow-passing-a-chip-ID.patch b/target/linux/generic/pending-6.1/774-net-dsa-b53-mmap-allow-passing-a-chip-ID.patch
deleted file mode 100644
index bb632b5eff4d..000000000000
--- a/target/linux/generic/pending-6.1/774-net-dsa-b53-mmap-allow-passing-a-chip-ID.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From patchwork Tue Mar 21 17:33:58 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=
- <noltari@gmail.com>
-X-Patchwork-Id: 13183004
-X-Patchwork-Delegate: kuba@kernel.org
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id B2B12C74A5B
-	for <netdev@archiver.kernel.org>; Tue, 21 Mar 2023 17:35:12 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S230297AbjCURfK (ORCPT <rfc822;netdev@archiver.kernel.org>);
-        Tue, 21 Mar 2023 13:35:10 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47438 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S230374AbjCURex (ORCPT
-        <rfc822;netdev@vger.kernel.org>); Tue, 21 Mar 2023 13:34:53 -0400
-Received: from mail-wr1-x432.google.com (mail-wr1-x432.google.com
- [IPv6:2a00:1450:4864:20::432])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C906B5550A;
-        Tue, 21 Mar 2023 10:34:26 -0700 (PDT)
-Received: by mail-wr1-x432.google.com with SMTP id y14so14546846wrq.4;
-        Tue, 21 Mar 2023 10:34:26 -0700 (PDT)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=gmail.com; s=20210112; t=1679420064;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:from:to:cc:subject:date
-         :message-id:reply-to;
-        bh=vnvnwWc5Tmg09HBQo/m9RbRM6yM8KLx8r1VA+Abfg3k=;
-        b=eFv+mwe94Y2YZMiJP5gydXVrGlbIAR5HCrY0rdcoGoMPzQUHLFckZeYCgEKudI55I7
-         gMLZYCtLwvDXvKeHM2AUigsq2YuJSeF5QwICPrhTnMwUGBg4yyyltrc3+J0lSd6/4kQv
-         h0yM1Oo4v0d8CuqjBU6bXienIk34AFVJfsPq+vWQTjAbUL7ht4WHZ2Ez2MFoTvZpkIJA
-         5iWMyVoMbugZl6eqNRjvDHFmtBtrZIv8AFs10r2Ca6+Yxm+aq0v33DRkbSVVqgFPNEzy
-         q5QOXOeLBPL6BvyovOpmVSWGoHf1zFV7lrzcqi+uc+FuYxQ9dyN3ND73DrrhWSkLaSg9
-         r8yA==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20210112; t=1679420064;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc
-         :subject:date:message-id:reply-to;
-        bh=vnvnwWc5Tmg09HBQo/m9RbRM6yM8KLx8r1VA+Abfg3k=;
-        b=jIRB8pIlrLA/ovhnEoePs/6SX8fn6l7l4fY2CxX2pLrTbP1JI8AAetPavvrNVQTr2M
-         Vm0iLbKyL/VpTq9+bSN1SMjaoi4lAMj0pgafoHrwABMVZpFauYvtCfSYTstZ2pw4Dr1j
-         wYQGj3BUSpFIYHtSIDMkb5449WA3T3TONhaQLRFAUCBD6gAFyEky5fY+DIHrGaj352B6
-         9ST/tkqHgPpuFlmromr42KQWoTFU+Pj0Uhyp7ru4BsnF7tTshWroZZIHUJmSACudEadr
-         fBPiuurX9jgp9zNqj8Oy0HjiVUnULFCapj8yICGp5s44uDAK/XFqFXpOuJ8ptS6uPazU
-         xUwg==
-X-Gm-Message-State: AO0yUKX2w6QZfaGDHtlZAlY/U8F8VuJa3HwlgXbxgGChgdgvIoFThawv
-        oDyFAhWbVfe4DxwXTwxgJ/I=
-X-Google-Smtp-Source: 
- AK7set+sH60XiJYup7bqrZTzFJVNe1YGcX/UTfjWV9xfGwNyodc34cHvKpqNagw5J+vEpv6CKvNHaA==
-X-Received: by 2002:adf:f344:0:b0:2cd:de25:1c76 with SMTP id
- e4-20020adff344000000b002cdde251c76mr12989754wrp.17.1679420064464;
-        Tue, 21 Mar 2023 10:34:24 -0700 (PDT)
-Received: from atlantis.lan (255.red-79-146-124.dynamicip.rima-tde.net.
- [79.146.124.255])
-        by smtp.gmail.com with ESMTPSA id
- b13-20020a056000054d00b002da1261aa44sm184775wrf.48.2023.03.21.10.34.22
-        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
-        Tue, 21 Mar 2023 10:34:23 -0700 (PDT)
-From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-To: f.fainelli@gmail.com, jonas.gorski@gmail.com, andrew@lunn.ch,
-        olteanv@gmail.com, davem@davemloft.net, edumazet@google.com,
-        kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org,
-        krzysztof.kozlowski+dt@linaro.org, netdev@vger.kernel.org,
-        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-Subject: [PATCH v2 3/4] net: dsa: b53: mmap: allow passing a chip ID
-Date: Tue, 21 Mar 2023 18:33:58 +0100
-Message-Id: <20230321173359.251778-4-noltari@gmail.com>
-X-Mailer: git-send-email 2.30.2
-In-Reply-To: <20230321173359.251778-1-noltari@gmail.com>
-References: <20230320155024.164523-1-noltari@gmail.com>
- <20230321173359.251778-1-noltari@gmail.com>
-MIME-Version: 1.0
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-X-Patchwork-Delegate: kuba@kernel.org
-
-BCM6318 and BCM63268 SoCs require a special handling for their RGMIIs, so we
-should be able to identify them as a special BCM63xx switch.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- v2:
-  - Add missing chip to b53_switch_chips[].
-  - Fix device_get_match_data() casting warning.
-  - Add BCM63268_DEVICE_ID to BCM6318 too.
-  - Add BCM6318 in commit description.
-
- drivers/net/dsa/b53/b53_common.c | 13 +++++++++++++
- drivers/net/dsa/b53/b53_mmap.c   | 32 +++++++++++++++++++++++---------
- drivers/net/dsa/b53/b53_priv.h   |  9 ++++++++-
- 3 files changed, 44 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2469,6 +2469,19 @@ static const struct b53_chip_data b53_sw
- 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
- 	},
- 	{
-+		.chip_id = BCM63268_DEVICE_ID,
-+		.dev_name = "BCM63268",
-+		.vlans = 4096,
-+		.enabled_ports = 0, /* pdata must provide them */
-+		.arl_bins = 4,
-+		.arl_buckets = 1024,
-+		.imp_port = 8,
-+		.vta_regs = B53_VTA_REGS_63XX,
-+		.duplex_reg = B53_DUPLEX_STAT_63XX,
-+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
-+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX,
-+	},
-+	{
- 		.chip_id = BCM53010_DEVICE_ID,
- 		.dev_name = "BCM53010",
- 		.vlans = 4096,
---- a/drivers/net/dsa/b53/b53_mmap.c
-+++ b/drivers/net/dsa/b53/b53_mmap.c
-@@ -262,7 +262,7 @@ static int b53_mmap_probe_of(struct plat
- 		return -ENOMEM;
- 
- 	pdata->regs = mem;
--	pdata->chip_id = BCM63XX_DEVICE_ID;
-+	pdata->chip_id = (u32)(unsigned long)device_get_match_data(dev);
- 	pdata->big_endian = of_property_read_bool(np, "big-endian");
- 
- 	of_ports = of_get_child_by_name(np, "ports");
-@@ -344,14 +344,28 @@ static void b53_mmap_shutdown(struct pla
- }
- 
- static const struct of_device_id b53_mmap_of_table[] = {
--	{ .compatible = "brcm,bcm3384-switch" },
--	{ .compatible = "brcm,bcm6318-switch" },
--	{ .compatible = "brcm,bcm6328-switch" },
--	{ .compatible = "brcm,bcm6362-switch" },
--	{ .compatible = "brcm,bcm6368-switch" },
--	{ .compatible = "brcm,bcm63268-switch" },
--	{ .compatible = "brcm,bcm63xx-switch" },
--	{ /* sentinel */ },
-+	{
-+		.compatible = "brcm,bcm3384-switch",
-+		.data = (void *)BCM63XX_DEVICE_ID,
-+	}, {
-+		.compatible = "brcm,bcm6318-switch",
-+		.data = (void *)BCM63268_DEVICE_ID,
-+	}, {
-+		.compatible = "brcm,bcm6328-switch",
-+		.data = (void *)BCM63XX_DEVICE_ID,
-+	}, {
-+		.compatible = "brcm,bcm6362-switch",
-+		.data = (void *)BCM63XX_DEVICE_ID,
-+	}, {
-+		.compatible = "brcm,bcm6368-switch",
-+		.data = (void *)BCM63XX_DEVICE_ID,
-+	}, {
-+		.compatible = "brcm,bcm63268-switch",
-+		.data = (void *)BCM63268_DEVICE_ID,
-+	}, {
-+		.compatible = "brcm,bcm63xx-switch",
-+		.data = (void *)BCM63XX_DEVICE_ID,
-+	}, { /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, b53_mmap_of_table);
- 
---- a/drivers/net/dsa/b53/b53_priv.h
-+++ b/drivers/net/dsa/b53/b53_priv.h
-@@ -70,6 +70,7 @@ enum {
- 	BCM53125_DEVICE_ID = 0x53125,
- 	BCM53128_DEVICE_ID = 0x53128,
- 	BCM63XX_DEVICE_ID = 0x6300,
-+	BCM63268_DEVICE_ID = 0x63268,
- 	BCM53010_DEVICE_ID = 0x53010,
- 	BCM53011_DEVICE_ID = 0x53011,
- 	BCM53012_DEVICE_ID = 0x53012,
-@@ -191,7 +192,13 @@ static inline int is531x5(struct b53_dev
- 
- static inline int is63xx(struct b53_device *dev)
- {
--	return dev->chip_id == BCM63XX_DEVICE_ID;
-+	return dev->chip_id == BCM63XX_DEVICE_ID ||
-+		dev->chip_id == BCM63268_DEVICE_ID;
-+}
-+
-+static inline int is63268(struct b53_device *dev)
-+{
-+	return dev->chip_id == BCM63268_DEVICE_ID;
- }
- 
- static inline int is5301x(struct b53_device *dev)
diff --git a/target/linux/generic/pending-6.1/775-net-dsa-b53-add-BCM63268-RGMII-configuration.patch b/target/linux/generic/pending-6.1/775-net-dsa-b53-add-BCM63268-RGMII-configuration.patch
deleted file mode 100644
index d90d757fb2c2..000000000000
--- a/target/linux/generic/pending-6.1/775-net-dsa-b53-add-BCM63268-RGMII-configuration.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-From patchwork Tue Mar 21 17:33:59 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=
- <noltari@gmail.com>
-X-Patchwork-Id: 13183005
-X-Patchwork-Delegate: kuba@kernel.org
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id 31BE4C761A6
-	for <netdev@archiver.kernel.org>; Tue, 21 Mar 2023 17:35:16 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S229674AbjCURfN (ORCPT <rfc822;netdev@archiver.kernel.org>);
-        Tue, 21 Mar 2023 13:35:13 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47684 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S230327AbjCURfB (ORCPT
-        <rfc822;netdev@vger.kernel.org>); Tue, 21 Mar 2023 13:35:01 -0400
-Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com
- [IPv6:2a00:1450:4864:20::436])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E1D855507D;
-        Tue, 21 Mar 2023 10:34:27 -0700 (PDT)
-Received: by mail-wr1-x436.google.com with SMTP id i9so14537769wrp.3;
-        Tue, 21 Mar 2023 10:34:27 -0700 (PDT)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=gmail.com; s=20210112; t=1679420066;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:from:to:cc:subject:date
-         :message-id:reply-to;
-        bh=asmFs22xWYwR1Ql9m/IrNv+MPUNDn8hSjmwDRYvO7mE=;
-        b=Cqj2C6aG5vEOlhh9N3ybvDA0CV38nhQODnfdnr7utNddd323iDagoJty1Wmi3MAzj1
-         5ORmYT5fQvUnild7C4RhcCNTBn+MoYZ+wDZwZYelu6BKHkW11YFK949ax5B50by+ASR2
-         z+rGI3wR5fVXd4VDgmcsT6zF5x69wKyhbhqIfrhG9BVFTctfaBgDS/l+bX1C56kSqv82
-         bQkKSSAehSLGpFoCU3q62OGoZVi3jDe6HDb5M1Dp2mgHhqsW19otZpJ57DjtZ1CmtPai
-         o7T/ew6WoIYSl6whBmV36jeNaDJ3TItOBrKc4nMJBDWaCg4DNzUSe0ei5Xz7Oik5lb3p
-         y9ew==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20210112; t=1679420066;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc
-         :subject:date:message-id:reply-to;
-        bh=asmFs22xWYwR1Ql9m/IrNv+MPUNDn8hSjmwDRYvO7mE=;
-        b=UdI2iQNBYwRf40ivf3ROR132t95BU/p3RUzXdZLCyz6c6JWtECQ5byyGeEwoX10n5u
-         HlepoNTJxMFLYrAHGvNLDPpWPuLXMa645S1mCVZ7NyWp8W96XzSynNZPeXHuJdb464QU
-         A7UTRSW3mlvKe9OR3EcB2CfBZv0yHWR0ldbnxcxGUFw8z78PNqpOVnITtjBdfpGesJ9c
-         VJw+fiM6hCcahor4nk9LLcAryPm8xmhDLxBKaLILO8wyTUiHY8G9hsXnFCtcpetnF5wS
-         pW13beAE+odb7ZZaXZUYpWGYhCe/hLzNjbo8YpgzHwadZthxPrT5YvNIYwyrvoViLM0n
-         KDRQ==
-X-Gm-Message-State: AO0yUKW+9H/kqcAUyWeZhZJhiJjsBcYn1THmZaSDrPrk/pNuGXJXGtJd
-        NgsGZW8iSqLEv81yK+U5Os8=
-X-Google-Smtp-Source: 
- AK7set/lzQZwCSxVaOe5dZ+7TR3xaQty/vg5xvZDpRW8TwTiPQblIbw5kJJTPLp67RySehrPIlCqSg==
-X-Received: by 2002:a5d:65c9:0:b0:2ce:ac31:54ff with SMTP id
- e9-20020a5d65c9000000b002ceac3154ffmr2776515wrw.2.1679420066191;
-        Tue, 21 Mar 2023 10:34:26 -0700 (PDT)
-Received: from atlantis.lan (255.red-79-146-124.dynamicip.rima-tde.net.
- [79.146.124.255])
-        by smtp.gmail.com with ESMTPSA id
- b13-20020a056000054d00b002da1261aa44sm184775wrf.48.2023.03.21.10.34.24
-        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
-        Tue, 21 Mar 2023 10:34:25 -0700 (PDT)
-From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-To: f.fainelli@gmail.com, jonas.gorski@gmail.com, andrew@lunn.ch,
-        olteanv@gmail.com, davem@davemloft.net, edumazet@google.com,
-        kuba@kernel.org, pabeni@redhat.com, robh+dt@kernel.org,
-        krzysztof.kozlowski+dt@linaro.org, netdev@vger.kernel.org,
-        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>,
- Simon Horman <simon.horman@corigine.com>
-Subject: [PATCH v2 4/4] net: dsa: b53: add BCM63268 RGMII configuration
-Date: Tue, 21 Mar 2023 18:33:59 +0100
-Message-Id: <20230321173359.251778-5-noltari@gmail.com>
-X-Mailer: git-send-email 2.30.2
-In-Reply-To: <20230321173359.251778-1-noltari@gmail.com>
-References: <20230320155024.164523-1-noltari@gmail.com>
- <20230321173359.251778-1-noltari@gmail.com>
-MIME-Version: 1.0
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-X-Patchwork-Delegate: kuba@kernel.org
-
-BCM63268 requires special RGMII configuration to work.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Simon Horman <simon.horman@corigine.com>
----
- v2: no changes.
-
- drivers/net/dsa/b53/b53_common.c | 6 +++++-
- drivers/net/dsa/b53/b53_regs.h   | 1 +
- 2 files changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -1240,8 +1240,12 @@ static void b53_adjust_63xx_rgmii(struct
- 		break;
- 	}
- 
--	if (port != dev->imp_port)
-+	if (port != dev->imp_port) {
-+		if (is63268(dev))
-+			rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE;
-+
- 		rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII;
-+	}
- 
- 	b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
- 
---- a/drivers/net/dsa/b53/b53_regs.h
-+++ b/drivers/net/dsa/b53/b53_regs.h
-@@ -138,6 +138,7 @@
- 
- #define B53_RGMII_CTRL_IMP		0x60
- #define   RGMII_CTRL_ENABLE_GMII	BIT(7)
-+#define   RGMII_CTRL_MII_OVERRIDE	BIT(6)
- #define   RGMII_CTRL_TIMING_SEL		BIT(2)
- #define   RGMII_CTRL_DLL_RXC		BIT(1)
- #define   RGMII_CTRL_DLL_TXC		BIT(0)
diff --git a/target/linux/generic/pending-6.1/777-net-dsa-b53-mdio-add-support-for-BCM53134.patch b/target/linux/generic/pending-6.1/777-net-dsa-b53-mdio-add-support-for-BCM53134.patch
deleted file mode 100644
index 7bed8c22a4a8..000000000000
--- a/target/linux/generic/pending-6.1/777-net-dsa-b53-mdio-add-support-for-BCM53134.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-From patchwork Fri Mar 24 08:41:38 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=
- <noltari@gmail.com>
-X-Patchwork-Id: 13186549
-X-Patchwork-Delegate: kuba@kernel.org
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id EF744C76195
-	for <netdev@archiver.kernel.org>; Fri, 24 Mar 2023 08:42:01 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S231807AbjCXImA (ORCPT <rfc822;netdev@archiver.kernel.org>);
-        Fri, 24 Mar 2023 04:42:00 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:32956 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S231272AbjCXIly (ORCPT
-        <rfc822;netdev@vger.kernel.org>); Fri, 24 Mar 2023 04:41:54 -0400
-Received: from mail-ed1-x535.google.com (mail-ed1-x535.google.com
- [IPv6:2a00:1450:4864:20::535])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 113A517CF3;
-        Fri, 24 Mar 2023 01:41:46 -0700 (PDT)
-Received: by mail-ed1-x535.google.com with SMTP id ek18so4877175edb.6;
-        Fri, 24 Mar 2023 01:41:45 -0700 (PDT)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=gmail.com; s=20210112; t=1679647304;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:from:to:cc:subject:date
-         :message-id:reply-to;
-        bh=OfUWRaFIQIQw/lRivER+LHryfdLliXzvabGrcmkQVEU=;
-        b=JMrl6Eay1FS0JZqgPHsbcVzuNAbFELc0SLNGyzYtOVQXcI+YwKDM9Ls7I9PsQVEPoZ
-         CthomCTYoz5G9DU7uBuia207rnjOhssZJRu0syrCoU+O/ZiQyGLJDvq61z5oZJxC2S40
-         kzRsUsC6MRjn64DKPWmxhsSTMKLzn2+P233LKNFbHtfi3NWF5Qu/85sUkxMurnfUgja0
-         qQhl25qYY7ZIvmlFHYefaI5UkITQFuiybrqJW9tztCdHf/gS+f33YkkvQ8njmMQa1DW0
-         ppedfOUotX+6kmHZGX1yea2V5ezEGGvRourZtYMoecTiD0E5d1J1bKhktKslVLIDm0ig
-         oc2g==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20210112; t=1679647304;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc
-         :subject:date:message-id:reply-to;
-        bh=OfUWRaFIQIQw/lRivER+LHryfdLliXzvabGrcmkQVEU=;
-        b=b3Gmga5ZDbnmQfnw1GCz+eU2JwgsVzfciZuSmfYAiVxpW4c6cur3MHbpzDPhi99wzA
-         ZYAM7ryLv88rXl/tQB5g2Nte5rvMfxUeHXsT/JpsRcSSocFRbRrk0QJyiA/Xj86NiD5N
-         C1sKz50Im190FmrvPcBh6OHQbv/3MQyE+1fQx+9q3jW5rQiAWQaYk4Ng8GlWA7gtG3jB
-         fHO6Fuoenn32pgkveJbQLYL/2t2f53wGf3QLQ3IeKW7jdfIHNThwrwqBMxdHoIDaTBT9
-         UWMeJuiYtylIibo/3zbORbWOgIERlWxZRf3BCOFpnzUn4eBzio4LgjtNxZ77ITRxsmbk
-         3+Hg==
-X-Gm-Message-State: AAQBX9dfyBfbR7Sdd5wqxMiAv3Yhk47pK1XzD87MZyAF3AxyoFyKcMaF
-        EbwJLyRvTGQEFdVWCGw1eMU=
-X-Google-Smtp-Source: 
- AKy350bpDVLq7k1FxG2Mek/VIobZL4KhufiKx8qfmpxpcWmLI3bLg8wfQKEAKJRNJBleo/7CZuCL5g==
-X-Received: by 2002:aa7:c711:0:b0:4a2:588f:b3c5 with SMTP id
- i17-20020aa7c711000000b004a2588fb3c5mr2261236edq.21.1679647304260;
-        Fri, 24 Mar 2023 01:41:44 -0700 (PDT)
-Received: from atlantis.lan (255.red-79-146-124.dynamicip.rima-tde.net.
- [79.146.124.255])
-        by smtp.gmail.com with ESMTPSA id
- z21-20020a50cd15000000b004acbda55f6bsm10323728edi.27.2023.03.24.01.41.43
-        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
-        Fri, 24 Mar 2023 01:41:43 -0700 (PDT)
-From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-To: paul.geurts@prodrive-technologies.com, f.fainelli@gmail.com,
-        jonas.gorski@gmail.com, andrew@lunn.ch, olteanv@gmail.com,
-        davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
-        pabeni@redhat.com, robh+dt@kernel.org,
-        krzysztof.kozlowski+dt@linaro.org, netdev@vger.kernel.org,
-        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-Subject: [PATCH v2 2/2] net: dsa: b53: mdio: add support for BCM53134
-Date: Fri, 24 Mar 2023 09:41:38 +0100
-Message-Id: <20230324084138.664285-3-noltari@gmail.com>
-X-Mailer: git-send-email 2.30.2
-In-Reply-To: <20230324084138.664285-1-noltari@gmail.com>
-References: <20230323121804.2249605-1-noltari@gmail.com>
- <20230324084138.664285-1-noltari@gmail.com>
-MIME-Version: 1.0
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-X-Patchwork-Delegate: kuba@kernel.org
-
-From: Paul Geurts <paul.geurts@prodrive-technologies.com>
-
-Add support for the BCM53134 Ethernet switch in the existing b53 dsa driver.
-BCM53134 is very similar to the BCM58XX series.
-
-Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- v2: add BCM53134 to is531x5() and remove special RGMII config
-
- drivers/net/dsa/b53/b53_common.c | 15 +++++++++++++++
- drivers/net/dsa/b53/b53_mdio.c   |  5 ++++-
- drivers/net/dsa/b53/b53_priv.h   |  7 +++++--
- 3 files changed, 24 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2616,6 +2616,20 @@ static const struct b53_chip_data b53_sw
- 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
- 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
- 	},
-+	{
-+		.chip_id = BCM53134_DEVICE_ID,
-+		.dev_name = "BCM53134",
-+		.vlans = 4096,
-+		.enabled_ports = 0x12f,
-+		.imp_port = 8,
-+		.cpu_port = B53_CPU_PORT,
-+		.vta_regs = B53_VTA_REGS,
-+		.arl_bins = 4,
-+		.arl_buckets = 1024,
-+		.duplex_reg = B53_DUPLEX_STAT_GE,
-+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
-+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
-+	},
- };
- 
- static int b53_switch_init(struct b53_device *dev)
-@@ -2793,6 +2807,7 @@ int b53_switch_detect(struct b53_device
- 		case BCM53012_DEVICE_ID:
- 		case BCM53018_DEVICE_ID:
- 		case BCM53019_DEVICE_ID:
-+		case BCM53134_DEVICE_ID:
- 			dev->chip_id = id32;
- 			break;
- 		default:
---- a/drivers/net/dsa/b53/b53_mdio.c
-+++ b/drivers/net/dsa/b53/b53_mdio.c
-@@ -286,6 +286,7 @@ static const struct b53_io_ops b53_mdio_
- #define B53_BRCM_OUI_2	0x03625c00
- #define B53_BRCM_OUI_3	0x00406000
- #define B53_BRCM_OUI_4	0x01410c00
-+#define B53_BRCM_OUI_5	0xae025000
- 
- static int b53_mdio_probe(struct mdio_device *mdiodev)
- {
-@@ -313,7 +314,8 @@ static int b53_mdio_probe(struct mdio_de
- 	if ((phy_id & 0xfffffc00) != B53_BRCM_OUI_1 &&
- 	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_2 &&
- 	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_3 &&
--	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_4) {
-+	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_4 &&
-+	    (phy_id & 0xfffffc00) != B53_BRCM_OUI_5) {
- 		dev_err(&mdiodev->dev, "Unsupported device: 0x%08x\n", phy_id);
- 		return -ENODEV;
- 	}
-@@ -375,6 +377,7 @@ static const struct of_device_id b53_of_
- 	{ .compatible = "brcm,bcm53115" },
- 	{ .compatible = "brcm,bcm53125" },
- 	{ .compatible = "brcm,bcm53128" },
-+	{ .compatible = "brcm,bcm53134" },
- 	{ .compatible = "brcm,bcm5365" },
- 	{ .compatible = "brcm,bcm5389" },
- 	{ .compatible = "brcm,bcm5395" },
---- a/drivers/net/dsa/b53/b53_priv.h
-+++ b/drivers/net/dsa/b53/b53_priv.h
-@@ -80,6 +80,7 @@ enum {
- 	BCM583XX_DEVICE_ID = 0x58300,
- 	BCM7445_DEVICE_ID = 0x7445,
- 	BCM7278_DEVICE_ID = 0x7278,
-+	BCM53134_DEVICE_ID = 0x5075,
- };
- 
- struct b53_pcs {
-@@ -187,7 +188,8 @@ static inline int is531x5(struct b53_dev
- {
- 	return dev->chip_id == BCM53115_DEVICE_ID ||
- 		dev->chip_id == BCM53125_DEVICE_ID ||
--		dev->chip_id == BCM53128_DEVICE_ID;
-+		dev->chip_id == BCM53128_DEVICE_ID ||
-+		dev->chip_id == BCM53134_DEVICE_ID;
- }
- 
- static inline int is63xx(struct b53_device *dev)
-@@ -215,7 +217,8 @@ static inline int is58xx(struct b53_devi
- 	return dev->chip_id == BCM58XX_DEVICE_ID ||
- 		dev->chip_id == BCM583XX_DEVICE_ID ||
- 		dev->chip_id == BCM7445_DEVICE_ID ||
--		dev->chip_id == BCM7278_DEVICE_ID;
-+		dev->chip_id == BCM7278_DEVICE_ID ||
-+		dev->chip_id == BCM53134_DEVICE_ID;
- }
- 
- #define B53_63XX_RGMII0	4
diff --git a/target/linux/generic/pending-6.1/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch b/target/linux/generic/pending-6.1/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch
deleted file mode 100644
index 39ba71606ec2..000000000000
--- a/target/linux/generic/pending-6.1/780-ARM-kirkwood-add-missing-linux-if_ether.h-for-ETH_AL.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From patchwork Thu Aug  5 22:23:30 2021
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 12422209
-Date: Thu, 5 Aug 2021 23:23:30 +0100
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
- linux-kernel@vger.kernel.org
-Cc: "David S. Miller" <davem@davemloft.net>, Andrew Lunn <andrew@lunn.ch>,
- Michael Walle <michael@walle.cc>
-Subject: [PATCH] ARM: kirkwood: add missing <linux/if_ether.h> for ETH_ALEN
-Message-ID: <YQxk4jrbm31NM1US@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-X-BeenThere: linux-arm-kernel@lists.infradead.org
-X-Mailman-Version: 2.1.34
-Precedence: list
-List-Id: <linux-arm-kernel.lists.infradead.org>
-List-Archive: <http://lists.infradead.org/pipermail/linux-arm-kernel/>
-Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org>
-
-After commit 83216e3988cd1 ("of: net: pass the dst buffer to
-of_get_mac_address()") build fails for kirkwood as ETH_ALEN is not
-defined.
-
-arch/arm/mach-mvebu/kirkwood.c: In function 'kirkwood_dt_eth_fixup':
-arch/arm/mach-mvebu/kirkwood.c:87:13: error: 'ETH_ALEN' undeclared (first use in this function); did you mean 'ESTALE'?
-   u8 tmpmac[ETH_ALEN];
-             ^~~~~~~~
-             ESTALE
-arch/arm/mach-mvebu/kirkwood.c:87:13: note: each undeclared identifier is reported only once for each function it appears in
-arch/arm/mach-mvebu/kirkwood.c:87:6: warning: unused variable 'tmpmac' [-Wunused-variable]
-   u8 tmpmac[ETH_ALEN];
-      ^~~~~~
-make[5]: *** [scripts/Makefile.build:262: arch/arm/mach-mvebu/kirkwood.o] Error 1
-make[5]: *** Waiting for unfinished jobs....
-
-Add missing #include <linux/if_ether.h> to fix this.
-
-Cc: David S. Miller <davem@davemloft.net>
-Cc: Andrew Lunn <andrew@lunn.ch>
-Cc: Michael Walle <michael@walle.cc>
-Reported-by: https://buildbot.openwrt.org/master/images/#/builders/56/builds/220/steps/44/logs/stdio
-Fixes: 83216e3988cd1 ("of: net: pass the dst buffer to of_get_mac_address()")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- arch/arm/mach-mvebu/kirkwood.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-mvebu/kirkwood.c
-+++ b/arch/arm/mach-mvebu/kirkwood.c
-@@ -11,6 +11,7 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/mbus.h>
-+#include <linux/if_ether.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
- #include <linux/of_net.h>
diff --git a/target/linux/generic/pending-6.1/790-bus-mhi-core-add-SBL-state-callback.patch b/target/linux/generic/pending-6.1/790-bus-mhi-core-add-SBL-state-callback.patch
deleted file mode 100644
index fe0f260ae36c..000000000000
--- a/target/linux/generic/pending-6.1/790-bus-mhi-core-add-SBL-state-callback.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 5f7c5e1c0d7a79be144e5efc1f24728ddd7fc25c Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sat, 5 Nov 2022 20:02:56 +0100
-Subject: [PATCH 1/2] bus: mhi: core: add SBL state callback
-
-Add support for SBL state callback in MHI core.
-
-It is required for ath11k MHI devices in order to be able to set QRTR
-instance ID in the SBL state so that QRTR instance ID-s dont conflict in
-case of multiple PCI/MHI cards or AHB + PCI/MHI card.
-Setting QRTR instance ID is only possible in SBL state and there is
-currently no way to ensure that we are in that state, so provide a
-callback that the controller can trigger off.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- drivers/bus/mhi/host/main.c | 1 +
- include/linux/mhi.h         | 2 ++
- 2 files changed, 3 insertions(+)
-
---- a/drivers/bus/mhi/host/main.c
-+++ b/drivers/bus/mhi/host/main.c
-@@ -906,6 +906,7 @@ int mhi_process_ctrl_ev_ring(struct mhi_
- 			switch (event) {
- 			case MHI_EE_SBL:
- 				st = DEV_ST_TRANSITION_SBL;
-+				mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_SBL_MODE);
- 				break;
- 			case MHI_EE_WFW:
- 			case MHI_EE_AMSS:
---- a/include/linux/mhi.h
-+++ b/include/linux/mhi.h
-@@ -34,6 +34,7 @@ struct mhi_buf_info;
-  * @MHI_CB_SYS_ERROR: MHI device entered error state (may recover)
-  * @MHI_CB_FATAL_ERROR: MHI device entered fatal error state
-  * @MHI_CB_BW_REQ: Received a bandwidth switch request from device
-+ * @MHI_CB_EE_SBL_MODE: MHI device entered SBL mode
-  */
- enum mhi_callback {
- 	MHI_CB_IDLE,
-@@ -45,6 +46,7 @@ enum mhi_callback {
- 	MHI_CB_SYS_ERROR,
- 	MHI_CB_FATAL_ERROR,
- 	MHI_CB_BW_REQ,
-+	MHI_CB_EE_SBL_MODE,
- };
- 
- /**
diff --git a/target/linux/generic/pending-6.1/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch b/target/linux/generic/pending-6.1/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
deleted file mode 100644
index 478a2cb27d80..000000000000
--- a/target/linux/generic/pending-6.1/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] bcma: get SoC device struct & copy its DMA params to the
- subdevices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-For bus devices to be fully usable it's required to set their DMA
-parameters.
-
-For years it has been missing and remained unnoticed because of
-mips_dma_alloc_coherent() silently handling the empty coherent_dma_mask.
-Kernel 4.19 came with a lot of DMA changes and caused a regression on
-the bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic
-dma noncoherent ops for simple noncoherent platforms") DMA coherent
-allocations just fail. Example:
-[    1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed
-[    1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA
-[    1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12
-[    1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
-
-This change fixes above regression in addition to the MIPS bcm47xx
-commit 321c46b91550 ("MIPS: BCM47XX: Setup struct device for the SoC").
-
-It also fixes another *old* GPIO regression caused by a parent pointing
-to the NULL:
-[    0.157054] missing gpiochip .dev parent pointer
-[    0.157287] bcma: bus0: Error registering GPIO driver: -22
-introduced by the commit 74f4e0cc6108 ("bcma: switch GPIO portions to
-use GPIOLIB_IRQCHIP").
-
-Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
-Fixes: 74f4e0cc6108 ("bcma: switch GPIO portions to use GPIOLIB_IRQCHIP")
-Cc: linux-mips@linux-mips.org
-Cc: Christoph Hellwig <hch@lst.de>
-Cc: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/bcma/host_soc.c
-+++ b/drivers/bcma/host_soc.c
-@@ -191,6 +191,8 @@ int __init bcma_host_soc_init(struct bcm
- 	struct bcma_bus *bus = &soc->bus;
- 	int err;
- 
-+	bus->dev = soc->dev;
-+
- 	/* Scan bus and initialize it */
- 	err = bcma_bus_early_register(bus);
- 	if (err)
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -236,13 +236,17 @@ EXPORT_SYMBOL(bcma_core_irq);
- 
- void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
- {
--	device_initialize(&core->dev);
-+	struct device *dev = &core->dev;
-+
-+	device_initialize(dev);
- 	core->dev.release = bcma_release_core_dev;
- 	core->dev.bus = &bcma_bus_type;
--	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
-+	dev_set_name(dev, "bcma%d:%d", bus->num, core->core_index);
- 	core->dev.parent = bus->dev;
--	if (bus->dev)
-+	if (bus->dev) {
- 		bcma_of_fill_device(bus->dev, core);
-+		dma_coerce_mask_and_coherent(dev, bus->dev->coherent_dma_mask);
-+	}
- 
- 	switch (bus->hosttype) {
- 	case BCMA_HOSTTYPE_PCI:
diff --git a/target/linux/generic/pending-6.1/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch b/target/linux/generic/pending-6.1/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch
deleted file mode 100644
index 815231973d9f..000000000000
--- a/target/linux/generic/pending-6.1/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch
+++ /dev/null
@@ -1,222 +0,0 @@
-From fc23ea48ba52c24f201fe5ca0132ee1a3de5a70a Mon Sep 17 00:00:00 2001
-From: Mauri Sandberg <maukka@ext.kapsi.fi>
-Date: Thu, 25 Mar 2021 11:48:05 +0200
-Subject: [PATCH 2/2] gpio: gpio-cascade: add generic GPIO cascade
-
-Adds support for building cascades of GPIO lines. That is, it allows
-setups when there is one upstream line and multiple cascaded lines, out
-of which one can be chosen at a time. The status of the upstream line
-can be conveyed to the selected cascaded line or, vice versa, the status
-of the cascaded line can be conveyed to the upstream line.
-
-A multiplexer is being used to select, which cascaded GPIO line is being
-used at any given time.
-
-At the moment only input direction is supported. In future it should be
-possible to add support for output direction, too.
-
-Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
-Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
----
-v7 -> v8:
- - rearrange members in struct gpio_cascade
- - cosmetic changes in file header and in one function declaration
- - added Reviewed-by tags by Linus and Andy
-v6 -> v7:
- - In Kconfig add info about module name
- - adhere to new convention that allows lines longer than 80 chars
- - use dev_probe_err with upstream gpio line too
- - refactor for cleaner exit of probe function.
-v5 -> v6:
- - In Kconfig, remove dependency to OF_GPIO and select only MULTIPLEXER
- - refactor code preferring one-liners
- - clean up prints, removing them from success-path.
- - don't explicitly set gpio_chip.of_node as it's done in the GPIO library
- - use devm_gpiochip_add_data instead of gpiochip_add
-v4 -> v5:
- - renamed gpio-mux-input -> gpio-cascade. refactored code accordingly
-   here and there and changed to use new bindings and compatible string
-   - ambigious and vague 'pin' was rename to 'upstream_line'
- - dropped Tested-by and Reviewed-by due to changes in bindings
- - dropped Reported-by suggested by an automatic bot as it was not really
-   appropriate to begin with
- - functionally it's the same as v4
-v3 -> v4:
- - Changed author email
- - Included Tested-by and Reviewed-by from Drew
-v2 -> v3:
- - use managed device resources
- - update Kconfig description
-v1 -> v2:
- - removed .owner from platform_driver as per test bot's instruction
- - added MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE
- - added gpio_mux_input_get_direction as it's recommended for all chips
- - removed because this is input only chip: gpio_mux_input_set_value
- - removed because they are not needed for input/output only chips:
-     gpio_mux_input_direction_input
-     gpio_mux_input_direction_output
- - fixed typo in an error message
- - added info message about successful registration
- - removed can_sleep flag as this does not sleep while getting GPIO value
-   like I2C or SPI do
- - Updated description in Kconfig
----
- drivers/gpio/Kconfig        |  15 +++++
- drivers/gpio/Makefile       |   1 +
- drivers/gpio/gpio-cascade.c | 117 ++++++++++++++++++++++++++++++++++++
- 3 files changed, 133 insertions(+)
- create mode 100644 drivers/gpio/gpio-cascade.c
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1712,4 +1712,19 @@ config GPIO_SIM
- 
- endmenu
- 
-+comment "Other GPIO expanders"
-+
-+config GPIO_CASCADE
-+	tristate "General GPIO cascade"
-+	select MULTIPLEXER
-+	help
-+	  Say yes here to enable support for generic GPIO cascade.
-+
-+	  This allows building one-to-many cascades of GPIO lines using
-+	  different types of multiplexers readily available. At the
-+	  moment only input lines are supported.
-+
-+	  To build the driver as a module choose 'm' and the resulting module
-+	  will be called 'gpio-cascade'.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_GPIO_BD9571MWV)		+= gpio-bd
- obj-$(CONFIG_GPIO_BRCMSTB)		+= gpio-brcmstb.o
- obj-$(CONFIG_GPIO_BT8XX)		+= gpio-bt8xx.o
- obj-$(CONFIG_GPIO_CADENCE)		+= gpio-cadence.o
-+obj-$(CONFIG_GPIO_CASCADE)		+= gpio-cascade.o
- obj-$(CONFIG_GPIO_CLPS711X)		+= gpio-clps711x.o
- obj-$(CONFIG_GPIO_SNPS_CREG)		+= gpio-creg-snps.o
- obj-$(CONFIG_GPIO_CRYSTAL_COVE)		+= gpio-crystalcove.o
---- /dev/null
-+++ b/drivers/gpio/gpio-cascade.c
-@@ -0,0 +1,117 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ *  A generic GPIO cascade driver
-+ *
-+ *  Copyright (C) 2021 Mauri Sandberg <maukka@ext.kapsi.fi>
-+ *
-+ * This allows building cascades of GPIO lines in a manner illustrated
-+ * below:
-+ *
-+ *                 /|---- Cascaded GPIO line 0
-+ *  Upstream      | |---- Cascaded GPIO line 1
-+ *  GPIO line ----+ | .
-+ *                | | .
-+ *                 \|---- Cascaded GPIO line n
-+ *
-+ * A multiplexer is being used to select, which cascaded line is being
-+ * addressed at any given time.
-+ *
-+ * At the moment only input mode is supported due to lack of means for
-+ * testing output functionality. At least theoretically output should be
-+ * possible with open drain constructions.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/platform_device.h>
-+#include <linux/mux/consumer.h>
-+
-+#include <linux/gpio/consumer.h>
-+#include <linux/gpio/driver.h>
-+
-+struct gpio_cascade {
-+	struct gpio_chip	gpio_chip;
-+	struct device		*parent;
-+	struct mux_control	*mux_control;
-+	struct gpio_desc	*upstream_line;
-+};
-+
-+static struct gpio_cascade *chip_to_cascade(struct gpio_chip *gc)
-+{
-+	return container_of(gc, struct gpio_cascade, gpio_chip);
-+}
-+
-+static int gpio_cascade_get_direction(struct gpio_chip *gc, unsigned int offset)
-+{
-+	return GPIO_LINE_DIRECTION_IN;
-+}
-+
-+static int gpio_cascade_get_value(struct gpio_chip *gc, unsigned int offset)
-+{
-+	struct gpio_cascade *cas = chip_to_cascade(gc);
-+	int ret;
-+
-+	ret = mux_control_select(cas->mux_control, offset);
-+	if (ret)
-+		return ret;
-+
-+	ret = gpiod_get_value(cas->upstream_line);
-+	mux_control_deselect(cas->mux_control);
-+	return ret;
-+}
-+
-+static int gpio_cascade_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct gpio_cascade *cas;
-+	struct mux_control *mc;
-+	struct gpio_desc *upstream;
-+	struct gpio_chip *gc;
-+
-+	cas = devm_kzalloc(dev, sizeof(*cas), GFP_KERNEL);
-+	if (!cas)
-+		return -ENOMEM;
-+
-+	mc = devm_mux_control_get(dev, NULL);
-+	if (IS_ERR(mc))
-+		return dev_err_probe(dev, PTR_ERR(mc), "unable to get mux-control\n");
-+
-+	cas->mux_control = mc;
-+	upstream = devm_gpiod_get(dev, "upstream",  GPIOD_IN);
-+	if (IS_ERR(upstream))
-+		return dev_err_probe(dev, PTR_ERR(upstream), "unable to claim upstream GPIO line\n");
-+
-+	cas->upstream_line = upstream;
-+	cas->parent = dev;
-+
-+	gc = &cas->gpio_chip;
-+	gc->get = gpio_cascade_get_value;
-+	gc->get_direction = gpio_cascade_get_direction;
-+	gc->base = -1;
-+	gc->ngpio = mux_control_states(mc);
-+	gc->label = dev_name(cas->parent);
-+	gc->parent = cas->parent;
-+	gc->owner = THIS_MODULE;
-+
-+	platform_set_drvdata(pdev, cas);
-+	return devm_gpiochip_add_data(dev, &cas->gpio_chip, NULL);
-+}
-+
-+static const struct of_device_id gpio_cascade_id[] = {
-+	{ .compatible = "gpio-cascade" },
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, gpio_cascade_id);
-+
-+static struct platform_driver gpio_cascade_driver = {
-+	.driver	= {
-+		.name		= "gpio-cascade",
-+		.of_match_table = gpio_cascade_id,
-+	},
-+	.probe	= gpio_cascade_probe,
-+};
-+module_platform_driver(gpio_cascade_driver);
-+
-+MODULE_AUTHOR("Mauri Sandberg <maukka@ext.kapsi.fi>");
-+MODULE_DESCRIPTION("Generic GPIO cascade");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/pending-6.1/802-OPP-Provide-old-opp-to-config_clks-on-_set_opp.patch b/target/linux/generic/pending-6.1/802-OPP-Provide-old-opp-to-config_clks-on-_set_opp.patch
deleted file mode 100644
index 2b3e4bbf7162..000000000000
--- a/target/linux/generic/pending-6.1/802-OPP-Provide-old-opp-to-config_clks-on-_set_opp.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From fd59b838dd90452f61a17dc9e5ff175205003068 Mon Sep 17 00:00:00 2001
-From: Christian Marangi <ansuelsmth@gmail.com>
-Date: Thu, 15 Sep 2022 18:49:43 +0200
-Subject: [PATCH] OPP: Provide old opp to config_clks on _set_opp
-
-With the target opp, also pass the old opp to config_clks function.
-This can be useful when a driver needs to take decision on what fequency
-to set based on what is the current frequency without using a
-clk_get_freq call.
-Update the only user of custom config_clks (tegra30 devfreq driver) to
-this new implementation.
-
-Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
----
- drivers/devfreq/tegra30-devfreq.c |  5 +++--
- drivers/opp/core.c                | 11 ++++++-----
- include/linux/pm_opp.h            | 11 ++++++-----
- 3 files changed, 15 insertions(+), 12 deletions(-)
-
---- a/drivers/devfreq/tegra30-devfreq.c
-+++ b/drivers/devfreq/tegra30-devfreq.c
-@@ -823,8 +823,9 @@ static int devm_tegra_devfreq_init_hw(st
- 
- static int tegra_devfreq_config_clks_nop(struct device *dev,
- 					 struct opp_table *opp_table,
--					 struct dev_pm_opp *opp, void *data,
--					 bool scaling_down)
-+					 struct dev_pm_opp *old_opp,
-+					 struct dev_pm_opp *opp,
-+					 void *data, bool scaling_down)
- {
- 	/* We want to skip clk configuration via dev_pm_opp_set_opp() */
- 	return 0;
---- a/drivers/opp/core.c
-+++ b/drivers/opp/core.c
-@@ -816,7 +816,8 @@ static int _set_opp_voltage(struct devic
- 
- static int
- _opp_config_clk_single(struct device *dev, struct opp_table *opp_table,
--		       struct dev_pm_opp *opp, void *data, bool scaling_down)
-+		       struct dev_pm_opp *old_opp, struct dev_pm_opp *opp,
-+		       void *data, bool scaling_down)
- {
- 	unsigned long *target = data;
- 	unsigned long freq;
-@@ -848,8 +849,8 @@ _opp_config_clk_single(struct device *de
-  * the order in which they are present in the array while scaling up.
-  */
- int dev_pm_opp_config_clks_simple(struct device *dev,
--		struct opp_table *opp_table, struct dev_pm_opp *opp, void *data,
--		bool scaling_down)
-+		struct opp_table *opp_table, struct dev_pm_opp *old_opp,
-+		struct dev_pm_opp *opp, void *data, bool scaling_down)
- {
- 	int ret, i;
- 
-@@ -1121,7 +1122,7 @@ static int _set_opp(struct device *dev,
- 	}
- 
- 	if (opp_table->config_clks) {
--		ret = opp_table->config_clks(dev, opp_table, opp, clk_data, scaling_down);
-+		ret = opp_table->config_clks(dev, opp_table, old_opp, opp, clk_data, scaling_down);
- 		if (ret)
- 			return ret;
- 	}
-@@ -1196,7 +1197,7 @@ int dev_pm_opp_set_rate(struct device *d
- 		 * equivalent to a clk_set_rate()
- 		 */
- 		if (!_get_opp_count(opp_table)) {
--			ret = opp_table->config_clks(dev, opp_table, NULL,
-+			ret = opp_table->config_clks(dev, opp_table, NULL, NULL,
- 						     &target_freq, false);
- 			goto put_opp_table;
- 		}
---- a/include/linux/pm_opp.h
-+++ b/include/linux/pm_opp.h
-@@ -61,7 +61,8 @@ typedef int (*config_regulators_t)(struc
- 			struct dev_pm_opp *old_opp, struct dev_pm_opp *new_opp,
- 			struct regulator **regulators, unsigned int count);
- 
--typedef int (*config_clks_t)(struct device *dev, struct opp_table *opp_table,
-+typedef int (*config_clks_t)(struct device *dev,
-+			struct opp_table *opp_table, struct dev_pm_opp *old_opp, 
- 			struct dev_pm_opp *opp, void *data, bool scaling_down);
- 
- /**
-@@ -160,8 +161,8 @@ int dev_pm_opp_set_config(struct device
- int devm_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config);
- void dev_pm_opp_clear_config(int token);
- int dev_pm_opp_config_clks_simple(struct device *dev,
--		struct opp_table *opp_table, struct dev_pm_opp *opp, void *data,
--		bool scaling_down);
-+		struct opp_table *opp_table, struct dev_pm_opp *old_opp,
-+		struct dev_pm_opp *opp, void *data, bool scaling_down);
- 
- struct dev_pm_opp *dev_pm_opp_xlate_required_opp(struct opp_table *src_table, struct opp_table *dst_table, struct dev_pm_opp *src_opp);
- int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate);
-@@ -346,8 +347,8 @@ static inline int devm_pm_opp_set_config
- static inline void dev_pm_opp_clear_config(int token) {}
- 
- static inline int dev_pm_opp_config_clks_simple(struct device *dev,
--		struct opp_table *opp_table, struct dev_pm_opp *opp, void *data,
--		bool scaling_down)
-+		struct opp_table *opp_table, struct dev_pm_opp *old_opp,
-+		struct dev_pm_opp *opp, void *data, bool scaling_down)
- {
- 	return -EOPNOTSUPP;
- }
diff --git a/target/linux/generic/pending-6.1/802-nvmem-u-boot-env-align-endianness-of-crc32-values.patch b/target/linux/generic/pending-6.1/802-nvmem-u-boot-env-align-endianness-of-crc32-values.patch
deleted file mode 100644
index 29fe668f8de9..000000000000
--- a/target/linux/generic/pending-6.1/802-nvmem-u-boot-env-align-endianness-of-crc32-values.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 0e71cac033bb7689c4dfa2e6814191337ef770f5 Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Thu, 13 Oct 2022 00:51:33 +0900
-Subject: [PATCH] nvmem: layouts: u-boot-env: align endianness of crc32 values
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch fixes crc32 error on Big-Endianness system by conversion of
-calculated crc32 value.
-
-Little-Endianness system:
-
-  obtained crc32: Little
-calculated crc32: Little
-
-Big-Endianness system:
-
-  obtained crc32: Little
-calculated crc32: Big
-
-log (APRESIA ApresiaLightGS120GT-SS, RTL8382M, Big-Endianness):
-
-[    8.570000] u_boot_env 18001200.spi:flash@0:partitions:partition@c0000: Invalid calculated CRC32: 0x88cd6f09 (expected: 0x096fcd88)
-[    8.580000] u_boot_env: probe of 18001200.spi:flash@0:partitions:partition@c0000 failed with error -22
-
-Fixes: f955dc1445069 ("nvmem: add driver handling U-Boot environment variables")
-
-Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Tested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
----
-
---- a/drivers/nvmem/layouts/u-boot-env.c
-+++ b/drivers/nvmem/layouts/u-boot-env.c
-@@ -148,7 +148,7 @@ int u_boot_env_parse(struct device *dev,
- 	crc32_data_len = dev_size - crc32_data_offset;
- 	data_len = dev_size - data_offset;
- 
--	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
-+	calc = le32_to_cpu((__le32)crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L);
- 	if (calc != crc32) {
- 		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
- 		err = -EINVAL;
diff --git a/target/linux/generic/pending-6.1/804-nvmem-core-support-mac-base-fixed-layout-cells.patch b/target/linux/generic/pending-6.1/804-nvmem-core-support-mac-base-fixed-layout-cells.patch
deleted file mode 100644
index 29cda1824e2e..000000000000
--- a/target/linux/generic/pending-6.1/804-nvmem-core-support-mac-base-fixed-layout-cells.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 13 Jul 2023 18:29:19 +0200
-Subject: [PATCH] nvmem: core: support "mac-base" fixed layout cells
-
-Fixed layout binding allows specifying "mac-base" NVMEM cells. It's used
-for base MAC address (that can be used for calculating relative
-addresses). It can be stored in a raw binary format or as an ASCII
-string.
----
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0-only
- menuconfig NVMEM
- 	bool "NVMEM Support"
-+	select GENERIC_NET_UTILS
- 	imply NVMEM_LAYOUTS
- 	help
- 	  Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
---- a/drivers/nvmem/core.c
-+++ b/drivers/nvmem/core.c
-@@ -7,9 +7,12 @@
-  */
- 
- #include <linux/device.h>
-+#include <linux/ctype.h>
-+#include <linux/etherdevice.h>
- #include <linux/export.h>
- #include <linux/fs.h>
- #include <linux/idr.h>
-+#include <linux/if_ether.h>
- #include <linux/init.h>
- #include <linux/kref.h>
- #include <linux/module.h>
-@@ -797,6 +800,62 @@ static int nvmem_validate_keepouts(struc
- 	return 0;
- }
- 
-+static int nvmem_mac_base_raw_read(void *context, const char *id, int index, unsigned int offset,
-+				   void *buf, size_t bytes)
-+{
-+	if (WARN_ON(bytes != ETH_ALEN))
-+		return -EINVAL;
-+
-+	if (index)
-+		eth_addr_add(buf, index);
-+
-+	return 0;
-+}
-+
-+static int nvmem_mac_base_ascii_read(void *context, const char *id, int index, unsigned int offset,
-+				     void *buf, size_t bytes)
-+{
-+	u8 mac[ETH_ALEN];
-+
-+	if (WARN_ON(bytes != 3 * ETH_ALEN - 1))
-+		return -EINVAL;
-+
-+	if (!mac_pton(buf, mac))
-+		return -EINVAL;
-+
-+	if (index)
-+		eth_addr_add(mac, index);
-+
-+	ether_addr_copy(buf, mac);
-+
-+	return 0;
-+}
-+
-+static int nvmem_mac_base_hex_read(void *context, const char *id, int index, unsigned int offset,
-+				   void *buf, size_t bytes)
-+{
-+	u8 mac[ETH_ALEN], *hexstr;
-+	int i;
-+
-+	if (WARN_ON(bytes != 2 * ETH_ALEN))
-+		return -EINVAL;
-+
-+	hexstr = (u8 *)buf;
-+	for (i = 0; i < ETH_ALEN; i++) {
-+		if (!isxdigit(hexstr[i * 2]) || !isxdigit(hexstr[i * 2 + 1]))
-+			return -EINVAL;
-+
-+		mac[i] = (hex_to_bin(hexstr[i * 2]) << 4) | hex_to_bin(hexstr[i * 2 + 1]);
-+	}
-+
-+	if (index)
-+		eth_addr_add(mac, index);
-+
-+	ether_addr_copy(buf, mac);
-+
-+	return 0;
-+}
-+
- static int nvmem_add_cells_from_dt(struct nvmem_device *nvmem, struct device_node *np)
- {
- 	struct device *dev = &nvmem->dev;
-@@ -836,6 +895,25 @@ static int nvmem_add_cells_from_dt(struc
- 		if (nvmem->fixup_dt_cell_info)
- 			nvmem->fixup_dt_cell_info(nvmem, &info);
- 
-+		if (of_device_is_compatible(np, "fixed-layout")) {
-+			if (of_device_is_compatible(child, "mac-base")) {
-+				if (info.bytes == ETH_ALEN) {
-+					info.raw_len = info.bytes;
-+					info.bytes = ETH_ALEN;
-+					info.read_post_process = nvmem_mac_base_raw_read;
-+				} else if (info.bytes == 2 * ETH_ALEN) {
-+					info.raw_len = info.bytes;
-+					info.bytes = ETH_ALEN;
-+					info.read_post_process = nvmem_mac_base_hex_read;
-+				} else if (info.bytes == 3 * ETH_ALEN - 1) {
-+					info.raw_len = info.bytes;
-+					info.bytes = ETH_ALEN;
-+					info.read_post_process = nvmem_mac_base_ascii_read;
-+				}
-+
-+			}
-+		}
-+
- 		ret = nvmem_add_one_cell(nvmem, &info);
- 		kfree(info.name);
- 		if (ret) {
diff --git a/target/linux/generic/pending-6.1/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-6.1/810-pci_disable_common_quirks.patch
deleted file mode 100644
index ba06196f7cbb..000000000000
--- a/target/linux/generic/pending-6.1/810-pci_disable_common_quirks.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: debloat: add kernel config option to disabling common PCI quirks
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/pci/Kconfig  | 6 ++++++
- drivers/pci/quirks.c | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -118,6 +118,13 @@ config XEN_PCIDEV_FRONTEND
- 	  The PCI device frontend driver allows the kernel to import arbitrary
- 	  PCI devices from a PCI backend to support PCI driver domains.
- 
-+config PCI_DISABLE_COMMON_QUIRKS
-+	bool "PCI disable common quirks"
-+	depends on PCI
-+	help
-+	  If you don't know what to do here, say N.
-+
-+
- config PCI_ATS
- 	bool
- 
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -207,6 +207,7 @@ static void quirk_mmio_always_on(struct
- DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
- 				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /*
-  * The Mellanox Tavor device gives false positive parity errors.  Disable
-  * parity error reporting.
-@@ -3393,6 +3394,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
-  * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
-  * To work around this, query the size it should be configured to by the
-@@ -3418,6 +3421,8 @@ static void quirk_intel_ntb(struct pci_d
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- /*
-  * Some BIOS implementations leave the Intel GPU interrupts enabled, even
-  * though no one is handling them (e.g., if the i915 driver is never
-@@ -3456,6 +3461,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
- 
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
-  * PCI devices which are on Intel chips can skip the 10ms delay
-  * before entering D3 mode.
diff --git a/target/linux/generic/pending-6.1/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-6.1/811-pci_disable_usb_common_quirks.patch
deleted file mode 100644
index fcb77e517470..000000000000
--- a/target/linux/generic/pending-6.1/811-pci_disable_usb_common_quirks.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: debloat: disable common USB quirks
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
- drivers/usb/host/pci-quirks.h | 18 +++++++++++++++++-
- include/linux/usb/hcd.h       |  7 +++++++
- 3 files changed, 40 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/pci-quirks.c
-+++ b/drivers/usb/host/pci-quirks.c
-@@ -128,6 +128,8 @@ struct amd_chipset_type {
- 	u8 rev;
- };
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static struct amd_chipset_info {
- 	struct pci_dev	*nb_dev;
- 	struct pci_dev	*smbus_dev;
-@@ -631,6 +633,10 @@ bool usb_amd_pt_check_port(struct device
- }
- EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
- 
-+#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
-+#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
-+
- /*
-  * Make sure the controller is completely inactive, unable to
-  * generate interrupts or do DMA.
-@@ -710,8 +716,17 @@ reset_needed:
- 	uhci_reset_hc(pdev, base);
- 	return 1;
- }
-+#else
-+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
-+{
-+	return 0;
-+}
-+
-+#endif
- EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
- {
- 	u16 cmd;
-@@ -1283,3 +1298,4 @@ static void quirk_usb_early_handoff(stru
- }
- DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
- 			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
-+#endif
---- a/drivers/usb/host/pci-quirks.h
-+++ b/drivers/usb/host/pci-quirks.h
-@@ -5,6 +5,9 @@
- #ifdef CONFIG_USB_PCI
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-+#endif  /* CONFIG_USB_PCI */
-+
-+#if defined(CONFIG_USB_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS)
- int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
- bool usb_amd_hang_symptom_quirk(void);
- bool usb_amd_prefetch_quirk(void);
-@@ -19,6 +22,18 @@ void sb800_prefetch(struct device *dev,
- bool usb_amd_pt_check_port(struct device *device, int port);
- #else
- struct pci_dev;
-+static inline int usb_amd_quirk_pll_check(void)
-+{
-+	return 0;
-+}
-+static inline bool usb_amd_hang_symptom_quirk(void)
-+{
-+	return false;
-+}
-+static inline bool usb_amd_prefetch_quirk(void)
-+{
-+	return false;
-+}
- static inline void usb_amd_quirk_pll_disable(void) {}
- static inline void usb_amd_quirk_pll_enable(void) {}
- static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
-@@ -29,6 +44,11 @@ static inline bool usb_amd_pt_check_port
- {
- 	return false;
- }
-+static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {}
-+static inline bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
-+{
-+	return false;
-+}
- #endif  /* CONFIG_USB_PCI */
- 
- #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
---- a/include/linux/usb/hcd.h
-+++ b/include/linux/usb/hcd.h
-@@ -484,7 +484,14 @@ extern int usb_hcd_pci_probe(struct pci_
- extern void usb_hcd_pci_remove(struct pci_dev *dev);
- extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
- 
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
-+#else
-+static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev)
-+{
-+	return 0;
-+}
-+#endif
- 
- #ifdef CONFIG_PM
- extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
diff --git a/target/linux/generic/pending-6.1/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch b/target/linux/generic/pending-6.1/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
deleted file mode 100644
index 33eb34c913ea..000000000000
--- a/target/linux/generic/pending-6.1/820-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d9c8bc8c1408f3e8529db6e4e04017b4c579c342 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 18 Feb 2018 17:08:04 +0100
-Subject: [PATCH] w1: gpio: fix problem with platfom data in w1-gpio
-
-In devices, where fdt is used, is impossible to apply platform data
-without proper fdt node.
-
-This patch allow to use platform data in devices with fdt.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- drivers/w1/masters/w1-gpio.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/w1/masters/w1-gpio.c
-+++ b/drivers/w1/masters/w1-gpio.c
-@@ -76,7 +76,7 @@ static int w1_gpio_probe(struct platform
- 	enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
- 	int err;
- 
--	if (of_have_populated_dt()) {
-+	if (of_have_populated_dt() && !dev_get_platdata(&pdev->dev)) {
- 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- 		if (!pdata)
- 			return -ENOMEM;
diff --git a/target/linux/generic/pending-6.1/834-ledtrig-libata.patch b/target/linux/generic/pending-6.1/834-ledtrig-libata.patch
deleted file mode 100644
index 7ca586c67636..000000000000
--- a/target/linux/generic/pending-6.1/834-ledtrig-libata.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: libata: add ledtrig support
-
-This adds a LED trigger for each ATA port indicating disk activity.
-
-As this is needed only on specific platforms (NAS SoCs and such),
-these platforms should define ARCH_WANTS_LIBATA_LEDS if there
-are boards with LED(s) intended to indicate ATA disk activity and
-need the OS to take care of that.
-In that way, if not selected, LED trigger support not will be
-included in libata-core and both, codepaths and structures remain
-untouched.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/ata/Kconfig       | 16 ++++++++++++++++
- drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
- include/linux/libata.h    |  9 +++++++++
- 3 files changed, 66 insertions(+)
-
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -67,6 +67,22 @@ config ATA_FORCE
- 
- 	  If unsure, say Y.
- 
-+config ARCH_WANT_LIBATA_LEDS
-+	bool
-+
-+config ATA_LEDS
-+	bool "support ATA port LED triggers"
-+	depends on ARCH_WANT_LIBATA_LEDS
-+	select NEW_LEDS
-+	select LEDS_CLASS
-+	select LEDS_TRIGGERS
-+	default y
-+	help
-+	  This option adds a LED trigger for each registered ATA port.
-+	  It is used to drive disk activity leds connected via GPIO.
-+
-+	  If unsure, say N.
-+
- config ATA_ACPI
- 	bool "ATA ACPI Support"
- 	depends on ACPI
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -663,6 +663,19 @@ u64 ata_tf_read_block(const struct ata_t
- 	return block;
- }
- 
-+#ifdef CONFIG_ATA_LEDS
-+#define LIBATA_BLINK_DELAY 20 /* ms */
-+static inline void ata_led_act(struct ata_port *ap)
-+{
-+	unsigned long led_delay = LIBATA_BLINK_DELAY;
-+
-+	if (unlikely(!ap->ledtrig))
-+		return;
-+
-+	led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
-+}
-+#endif
-+
- /**
-  *	ata_build_rw_tf - Build ATA taskfile for given read/write request
-  *	@qc: Metadata associated with the taskfile to build
-@@ -4716,6 +4729,9 @@ void __ata_qc_complete(struct ata_queued
- 		link->active_tag = ATA_TAG_POISON;
- 		ap->nr_active_links--;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	ata_led_act(ap);
-+#endif
- 
- 	/* clear exclusive status */
- 	if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL &&
-@@ -5438,6 +5454,9 @@ struct ata_port *ata_port_alloc(struct a
- 	ap->stats.unhandled_irq = 1;
- 	ap->stats.idle_irq = 1;
- #endif
-+#ifdef CONFIG_ATA_LEDS
-+	ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
-+#endif
- 	ata_sff_port_init(ap);
- 
- 	return ap;
-@@ -5476,6 +5495,12 @@ static void ata_host_release(struct kref
- 
- 		kfree(ap->pmp_link);
- 		kfree(ap->slave_link);
-+#ifdef CONFIG_ATA_LEDS
-+		if (ap->ledtrig) {
-+			led_trigger_unregister(ap->ledtrig);
-+			kfree(ap->ledtrig);
-+		};
-+#endif
- 		kfree(ap);
- 		host->ports[i] = NULL;
- 	}
-@@ -5878,7 +5903,23 @@ int ata_host_register(struct ata_host *h
- 		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
- 		host->ports[i]->local_port_no = i + 1;
- 	}
-+#ifdef CONFIG_ATA_LEDS
-+	for (i = 0; i < host->n_ports; i++) {
-+		if (unlikely(!host->ports[i]->ledtrig))
-+			continue;
- 
-+		snprintf(host->ports[i]->ledtrig_name,
-+			sizeof(host->ports[i]->ledtrig_name), "ata%u",
-+			host->ports[i]->print_id);
-+
-+		host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
-+
-+		if (led_trigger_register(host->ports[i]->ledtrig)) {
-+			kfree(host->ports[i]->ledtrig);
-+			host->ports[i]->ledtrig = NULL;
-+		}
-+	}
-+#endif
- 	/* Create associated sysfs transport objects  */
- 	for (i = 0; i < host->n_ports; i++) {
- 		rc = ata_tport_add(host->dev,host->ports[i]);
---- a/include/linux/libata.h
-+++ b/include/linux/libata.h
-@@ -23,6 +23,9 @@
- #include <linux/cdrom.h>
- #include <linux/sched.h>
- #include <linux/async.h>
-+#ifdef CONFIG_ATA_LEDS
-+#include <linux/leds.h>
-+#endif
- 
- /*
-  * Define if arch has non-standard setup.  This is a _PCI_ standard
-@@ -865,6 +868,12 @@ struct ata_port {
- #ifdef CONFIG_ATA_ACPI
- 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
- #endif
-+
-+#ifdef CONFIG_ATA_LEDS
-+	struct led_trigger	*ledtrig;
-+	char			ledtrig_name[8];
-+#endif
-+
- 	/* owned by EH */
- 	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
- };
diff --git a/target/linux/generic/pending-6.1/840-hwrng-bcm2835-set-quality-to-1000.patch b/target/linux/generic/pending-6.1/840-hwrng-bcm2835-set-quality-to-1000.patch
deleted file mode 100644
index 5ca8933d6fef..000000000000
--- a/target/linux/generic/pending-6.1/840-hwrng-bcm2835-set-quality-to-1000.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d6988cf1d16faac56899918bb2b1be8d85155e3f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Sat, 20 Feb 2021 18:36:38 +0100
-Subject: [PATCH] hwrng: bcm2835: set quality to 1000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows devices without a high precission timer to reduce boot from >100s
-to <30s.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- drivers/char/hw_random/bcm2835-rng.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/char/hw_random/bcm2835-rng.c
-+++ b/drivers/char/hw_random/bcm2835-rng.c
-@@ -170,6 +170,7 @@ static int bcm2835_rng_probe(struct plat
- 	priv->rng.init = bcm2835_rng_init;
- 	priv->rng.read = bcm2835_rng_read;
- 	priv->rng.cleanup = bcm2835_rng_cleanup;
-+	priv->rng.quality = 1000;
- 
- 	if (dev_of_node(dev)) {
- 		rng_id = of_match_node(bcm2835_rng_of_match, dev->of_node);
diff --git a/target/linux/generic/pending-6.1/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch b/target/linux/generic/pending-6.1/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch
deleted file mode 100644
index fc61ee202a50..000000000000
--- a/target/linux/generic/pending-6.1/850-0023-PCI-aardvark-Make-main-irq_chip-structure-a-static-d.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 663b9f99bb35dbc0c7b685f71ee3668a60d31320 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
-Date: Mon, 10 Jan 2022 02:02:00 +0100
-Subject: [PATCH] PCI: aardvark: Make main irq_chip structure a static driver
- structure
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Marc Zyngier says [1] that we should use struct irq_chip as a global
-static struct in the driver. Even though the structure currently
-contains a dynamic member (parent_device), Marc says [2] that he plans
-to kill it and make the structure completely static.
-
-We have already converted others irq_chip structures in this driver in
-this way, but we omitted this one because the .name member is
-dynamically created from device's name, and the name is displayed in
-sysfs, so changing it would break sysfs ABI.
-
-The rationale for changing the name (to "advk-INT") in spite of sysfs
-ABI, and thus allowing to convert to a static structure, is that after
-the other changes we made in this series, the IRQ chip is basically
-something different: it no logner generates ERR and PME interrupts (they
-are generated by emulated bridge's rp_irq_chip).
-
-[1] https://lore.kernel.org/linux-pci/877dbcvngf.wl-maz@kernel.org/
-[2] https://lore.kernel.org/linux-pci/874k6gvkhz.wl-maz@kernel.org/
-
-Signed-off-by: Marek Behún <kabel@kernel.org>
----
- drivers/pci/controller/pci-aardvark.c | 25 +++++++------------------
- 1 file changed, 7 insertions(+), 18 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -277,7 +277,6 @@ struct advk_pcie {
- 	u8 wins_count;
- 	struct irq_domain *rp_irq_domain;
- 	struct irq_domain *irq_domain;
--	struct irq_chip irq_chip;
- 	raw_spinlock_t irq_lock;
- 	struct irq_domain *msi_domain;
- 	struct irq_domain *msi_inner_domain;
-@@ -1426,14 +1425,19 @@ static void advk_pcie_irq_unmask(struct
- 	raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
- }
- 
-+static struct irq_chip advk_irq_chip = {
-+	.name		= "advk-INT",
-+	.irq_mask	= advk_pcie_irq_mask,
-+	.irq_unmask	= advk_pcie_irq_unmask,
-+};
-+
- static int advk_pcie_irq_map(struct irq_domain *h,
- 			     unsigned int virq, irq_hw_number_t hwirq)
- {
- 	struct advk_pcie *pcie = h->host_data;
- 
- 	irq_set_status_flags(virq, IRQ_LEVEL);
--	irq_set_chip_and_handler(virq, &pcie->irq_chip,
--				 handle_level_irq);
-+	irq_set_chip_and_handler(virq, &advk_irq_chip, handle_level_irq);
- 	irq_set_chip_data(virq, pcie);
- 
- 	return 0;
-@@ -1492,7 +1496,6 @@ static int advk_pcie_init_irq_domain(str
- 	struct device *dev = &pcie->pdev->dev;
- 	struct device_node *node = dev->of_node;
- 	struct device_node *pcie_intc_node;
--	struct irq_chip *irq_chip;
- 	int ret = 0;
- 
- 	raw_spin_lock_init(&pcie->irq_lock);
-@@ -1503,28 +1506,14 @@ static int advk_pcie_init_irq_domain(str
- 		return -ENODEV;
- 	}
- 
--	irq_chip = &pcie->irq_chip;
--
--	irq_chip->name = devm_kasprintf(dev, GFP_KERNEL, "%s-irq",
--					dev_name(dev));
--	if (!irq_chip->name) {
--		ret = -ENOMEM;
--		goto out_put_node;
--	}
--
--	irq_chip->irq_mask = advk_pcie_irq_mask;
--	irq_chip->irq_unmask = advk_pcie_irq_unmask;
--
- 	pcie->irq_domain =
- 		irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
- 				      &advk_pcie_irq_domain_ops, pcie);
- 	if (!pcie->irq_domain) {
- 		dev_err(dev, "Failed to get a INTx IRQ domain\n");
- 		ret = -ENOMEM;
--		goto out_put_node;
- 	}
- 
--out_put_node:
- 	of_node_put(pcie_intc_node);
- 	return ret;
- }
diff --git a/target/linux/generic/pending-6.1/850-dt-bindings-clk-add-BCM63268-timer-clock-definitions.patch b/target/linux/generic/pending-6.1/850-dt-bindings-clk-add-BCM63268-timer-clock-definitions.patch
deleted file mode 100644
index cc6f1e0d9dbe..000000000000
--- a/target/linux/generic/pending-6.1/850-dt-bindings-clk-add-BCM63268-timer-clock-definitions.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From patchwork Wed Mar 22 17:15:12 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=
- <noltari@gmail.com>
-X-Patchwork-Id: 13184389
-Return-Path: <linux-clk-owner@vger.kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id 73F2DC6FD1C
-	for <linux-clk@archiver.kernel.org>; Wed, 22 Mar 2023 17:15:59 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S231363AbjCVRP5 (ORCPT <rfc822;linux-clk@archiver.kernel.org>);
-        Wed, 22 Mar 2023 13:15:57 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58824 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S231408AbjCVRPy (ORCPT
-        <rfc822;linux-clk@vger.kernel.org>); Wed, 22 Mar 2023 13:15:54 -0400
-Received: from mail-wm1-x32d.google.com (mail-wm1-x32d.google.com
- [IPv6:2a00:1450:4864:20::32d])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 70E4C64B28;
-        Wed, 22 Mar 2023 10:15:24 -0700 (PDT)
-Received: by mail-wm1-x32d.google.com with SMTP id n19so1740892wms.0;
-        Wed, 22 Mar 2023 10:15:24 -0700 (PDT)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=gmail.com; s=20210112; t=1679505322;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:from:to:cc:subject:date
-         :message-id:reply-to;
-        bh=dEknM98Izmc8d/crPsoJ+ejZxfl78958Ei6SPYhYDHs=;
-        b=LTOQ75W3s5nYo+nEfiJAKqytSopONB4jCtU3zRygzPMasugVOrYFMsUR+WrpsAjuRT
-         v4HgWpJxEsIWeRXrUN9W21mFXhGgJLJXSxRnrio0CsZZBNMdkebbNOphgKXIWAdm+2iM
-         PzqAdGm5t38wT2mmm6V/9hCy90+12raHM82tNFdhhiezfg2cukVOKP3j/TeOVCwas0gQ
-         iFc+CuZB6y73zYXvMUMUpTsqI5vev4xJsSMHIQJVmUxJAwqhOBhN9JCRo7Ao+wayjn2d
-         Fxo6AV3A8v68nVfoQ0K0I+eWXG48nMCX45iWh/lVvVTOFcR99kn4va7NY1oVnPsh+WQz
-         WcLA==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20210112; t=1679505322;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc
-         :subject:date:message-id:reply-to;
-        bh=dEknM98Izmc8d/crPsoJ+ejZxfl78958Ei6SPYhYDHs=;
-        b=wv2NSR1B5RnsdoEE7mgJSHAfSs1JHZbQ1HPMldyaGWAk1dcucqh/uDzM3Flz+ADRi1
-         19NoaB2Ur7QaWZejbuplnIOK/nte3PnmqJ9ZNw8HejmuS4eU8mB1V1aJUSKSPGsfUi4a
-         LYe3HSw87l0jrAC7ptdKvdUtzBoIkX0CeFvfguTQQkDhUTyAFIG144hY6uPXY9Mga96b
-         gnNe2dLCzHQLbEJpaDaavT7FEEcLDxaq7jNcR2xqEEZaIwfcew+Q05t4xL/3i8GAj9Ru
-         6ivQjIbBKfYQF88o7KnOW9o1wjrGsk+Nd4Iy0OLZix3JQasCJGrKV7ib5awI9J39upYV
-         fa4A==
-X-Gm-Message-State: AO0yUKWw75I1M5Vjrd4vXq4GTruQu0H84pycgyi2CT3bczTYRJpWmEWg
-        +bHDhvp1n5IWW85GI9vKWpbclB13a/S0RQ==
-X-Google-Smtp-Source: 
- AK7set9T/2oJsVetUb2L4mPEWu8YqDrnK8EzHK5bJf1ABIa1Et8f7BFJ7AA3j14ITZuf8cH0HqlRtg==
-X-Received: by 2002:a05:600c:2304:b0:3ed:2949:985b with SMTP id
- 4-20020a05600c230400b003ed2949985bmr206833wmo.23.1679505322457;
-        Wed, 22 Mar 2023 10:15:22 -0700 (PDT)
-Received: from atlantis.lan (255.red-79-146-124.dynamicip.rima-tde.net.
- [79.146.124.255])
-        by smtp.gmail.com with ESMTPSA id
- v10-20020a05600c470a00b003ee11ac2288sm8414333wmo.21.2023.03.22.10.15.21
-        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
-        Wed, 22 Mar 2023 10:15:22 -0700 (PDT)
-From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-To: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
-        krzysztof.kozlowski+dt@linaro.org, p.zabel@pengutronix.de,
-        f.fainelli@gmail.com, jonas.gorski@gmail.com,
-        william.zhang@broadcom.com, linux-clk@vger.kernel.org,
-        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>,
- Rob Herring <robh@kernel.org>
-Subject: [PATCH v4 1/4] dt-bindings: clk: add BCM63268 timer clock definitions
-Date: Wed, 22 Mar 2023 18:15:12 +0100
-Message-Id: <20230322171515.120353-2-noltari@gmail.com>
-X-Mailer: git-send-email 2.30.2
-In-Reply-To: <20230322171515.120353-1-noltari@gmail.com>
-References: <20230322171515.120353-1-noltari@gmail.com>
-MIME-Version: 1.0
-Precedence: bulk
-List-ID: <linux-clk.vger.kernel.org>
-X-Mailing-List: linux-clk@vger.kernel.org
-
-Add missing timer clock definitions for BCM63268.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Rob Herring <robh@kernel.org>
----
- v4: no changes
- v3: no changes
- v2: change commit title, as suggested by Stephen Boyd
-
- include/dt-bindings/clock/bcm63268-clock.h | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/include/dt-bindings/clock/bcm63268-clock.h
-+++ b/include/dt-bindings/clock/bcm63268-clock.h
-@@ -27,4 +27,17 @@
- #define BCM63268_CLK_TBUS	27
- #define BCM63268_CLK_ROBOSW250	31
- 
-+#define BCM63268_TCLK_EPHY1		0
-+#define BCM63268_TCLK_EPHY2		1
-+#define BCM63268_TCLK_EPHY3		2
-+#define BCM63268_TCLK_GPHY1		3
-+#define BCM63268_TCLK_DSL		4
-+#define BCM63268_TCLK_WAKEON_EPHY	6
-+#define BCM63268_TCLK_WAKEON_DSL	7
-+#define BCM63268_TCLK_FAP1		11
-+#define BCM63268_TCLK_FAP2		15
-+#define BCM63268_TCLK_UTO_50		16
-+#define BCM63268_TCLK_UTO_EXTIN		17
-+#define BCM63268_TCLK_USB_REF		18
-+
- #endif /* __DT_BINDINGS_CLOCK_BCM63268_H */
diff --git a/target/linux/generic/pending-6.1/851-dt-bindings-reset-add-BCM63268-timer-reset-definitions.patch b/target/linux/generic/pending-6.1/851-dt-bindings-reset-add-BCM63268-timer-reset-definitions.patch
deleted file mode 100644
index 5f1be105ac72..000000000000
--- a/target/linux/generic/pending-6.1/851-dt-bindings-reset-add-BCM63268-timer-reset-definitions.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From patchwork Wed Mar 22 17:15:13 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=
- <noltari@gmail.com>
-X-Patchwork-Id: 13184390
-Return-Path: <linux-clk-owner@vger.kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id D0B1AC6FD1C
-	for <linux-clk@archiver.kernel.org>; Wed, 22 Mar 2023 17:16:08 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S231472AbjCVRQI (ORCPT <rfc822;linux-clk@archiver.kernel.org>);
-        Wed, 22 Mar 2023 13:16:08 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58934 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S231435AbjCVRP5 (ORCPT
-        <rfc822;linux-clk@vger.kernel.org>); Wed, 22 Mar 2023 13:15:57 -0400
-Received: from mail-wm1-x329.google.com (mail-wm1-x329.google.com
- [IPv6:2a00:1450:4864:20::329])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9655064863;
-        Wed, 22 Mar 2023 10:15:25 -0700 (PDT)
-Received: by mail-wm1-x329.google.com with SMTP id
- v4-20020a05600c470400b003ee4f06428fso2424553wmo.4;
-        Wed, 22 Mar 2023 10:15:25 -0700 (PDT)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=gmail.com; s=20210112; t=1679505324;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:from:to:cc:subject:date
-         :message-id:reply-to;
-        bh=C7ykhArT1dO7P8wtmI92eo4c7KtPZI9w182/5+cB3T0=;
-        b=WRZRU2SM9n1LfUj4SgTPfQczADC2pfvoIrOsNpBLTym2eOfmkTetb/WbGSla5kw2Wb
-         SH5MIC2fFeScJg6T5FFAUOOLmRVW9xvl8Q3T3NKb3z/9wvPHO767nrdIbffRWMJFs7gW
-         wT/kuTpn8GYdfY0sZ/dMTkq41DVusEkxfX6GxtG85O98ZP8xMHQog8aPs9fRfUvI5ZKB
-         eGYcRz/Wn1cHhjey9jtWzQEEmZ/BT3b0HQTF9Tl88oofhiEgbyjFXr91+vRsLbsJpGXH
-         /1FjjaLG5DnonKubV9rmbuCU8KzwH331gi2KuRjvLD2V+OMewqSa5i+GvgVv8x2zC8y+
-         /mLQ==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20210112; t=1679505324;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc
-         :subject:date:message-id:reply-to;
-        bh=C7ykhArT1dO7P8wtmI92eo4c7KtPZI9w182/5+cB3T0=;
-        b=bhd0fNh0jDOMlGSC4F+p5igV8AUlGEPj2cXUwgdgqRfSSuUy9z+Li8cT0MbY/aWH5Z
-         qInRVA+R1cWV3ubrDyKag6oEc0LDU234bnMFcP9b7MRlrM8Dpit9TFSyqJU4sDUWNDs5
-         KOe2k/SNIdat6munC9VOuEBDO0eB/UDMN+repKwXNdHChp/Toq9qMvW4Uy8uHxosbQlD
-         8P88GbKFjynb1E8I8croGjfub7+y8PPsWB0xNUcafIv6xs3MnVOP1Mk4KwBCbqS509la
-         mfjsriXtIybO8XFqtn100ungjvbFWdogEplLdSPVdgAqdfF5J8gHxAoApoeYejYkL5/R
-         kOhQ==
-X-Gm-Message-State: AO0yUKWdzr3dMmjKhD8tF+ec4Dfdq9VGZ/WCU4d85npKQvxSwhNPZZ1J
-        5WYRIqivh0suFC1OqEidwenpiJYvXedYjw==
-X-Google-Smtp-Source: 
- AK7set87ew2/mKWeShXTTW/YBbBJNR2zeGFV0CfuqLXhiJEU6tqFuyKcW+vFEoKHIbNUS8wRy1SzLA==
-X-Received: by 2002:a05:600c:290:b0:3ee:6d88:774a with SMTP id
- 16-20020a05600c029000b003ee6d88774amr160734wmk.14.1679505323514;
-        Wed, 22 Mar 2023 10:15:23 -0700 (PDT)
-Received: from atlantis.lan (255.red-79-146-124.dynamicip.rima-tde.net.
- [79.146.124.255])
-        by smtp.gmail.com with ESMTPSA id
- v10-20020a05600c470a00b003ee11ac2288sm8414333wmo.21.2023.03.22.10.15.22
-        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
-        Wed, 22 Mar 2023 10:15:23 -0700 (PDT)
-From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-To: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
-        krzysztof.kozlowski+dt@linaro.org, p.zabel@pengutronix.de,
-        f.fainelli@gmail.com, jonas.gorski@gmail.com,
-        william.zhang@broadcom.com, linux-clk@vger.kernel.org,
-        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>,
- Rob Herring <robh@kernel.org>
-Subject: [PATCH v4 2/4] dt-bindings: reset: add BCM63268 timer reset
- definitions
-Date: Wed, 22 Mar 2023 18:15:13 +0100
-Message-Id: <20230322171515.120353-3-noltari@gmail.com>
-X-Mailer: git-send-email 2.30.2
-In-Reply-To: <20230322171515.120353-1-noltari@gmail.com>
-References: <20230322171515.120353-1-noltari@gmail.com>
-MIME-Version: 1.0
-Precedence: bulk
-List-ID: <linux-clk.vger.kernel.org>
-X-Mailing-List: linux-clk@vger.kernel.org
-
-Add missing timer reset definitions for BCM63268.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Rob Herring <robh@kernel.org>
----
- v4: no changes
- v3: no changes
- v2: change commit title, as suggested by Stephen Boyd
-
- include/dt-bindings/reset/bcm63268-reset.h | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/include/dt-bindings/reset/bcm63268-reset.h
-+++ b/include/dt-bindings/reset/bcm63268-reset.h
-@@ -23,4 +23,8 @@
- #define BCM63268_RST_PCIE_HARD	17
- #define BCM63268_RST_GPHY	18
- 
-+#define BCM63268_TRST_SW	29
-+#define BCM63268_TRST_HW	30
-+#define BCM63268_TRST_POR	31
-+
- #endif /* __DT_BINDINGS_RESET_BCM63268_H */
diff --git a/target/linux/generic/pending-6.1/852-clk-bcm-Add-BCM63268-timer-clock-and-reset-driver.patch b/target/linux/generic/pending-6.1/852-clk-bcm-Add-BCM63268-timer-clock-and-reset-driver.patch
deleted file mode 100644
index 7e500cd1b58c..000000000000
--- a/target/linux/generic/pending-6.1/852-clk-bcm-Add-BCM63268-timer-clock-and-reset-driver.patch
+++ /dev/null
@@ -1,345 +0,0 @@
-From patchwork Wed Mar 22 17:15:15 2023
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 8bit
-X-Patchwork-Submitter: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=
- <noltari@gmail.com>
-X-Patchwork-Id: 13184392
-Return-Path: <linux-clk-owner@vger.kernel.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
-	aws-us-west-2-korg-lkml-1.web.codeaurora.org
-Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
-	by smtp.lore.kernel.org (Postfix) with ESMTP id 199D9C76196
-	for <linux-clk@archiver.kernel.org>; Wed, 22 Mar 2023 17:16:11 +0000 (UTC)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
-        id S231512AbjCVRQJ (ORCPT <rfc822;linux-clk@archiver.kernel.org>);
-        Wed, 22 Mar 2023 13:16:09 -0400
-Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58942 "EHLO
-        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
-        with ESMTP id S231442AbjCVRP5 (ORCPT
-        <rfc822;linux-clk@vger.kernel.org>); Wed, 22 Mar 2023 13:15:57 -0400
-Received: from mail-wm1-x32c.google.com (mail-wm1-x32c.google.com
- [IPv6:2a00:1450:4864:20::32c])
-        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1DDB36487D;
-        Wed, 22 Mar 2023 10:15:27 -0700 (PDT)
-Received: by mail-wm1-x32c.google.com with SMTP id
- i5-20020a05600c354500b003edd24054e0so6717370wmq.4;
-        Wed, 22 Mar 2023 10:15:27 -0700 (PDT)
-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=gmail.com; s=20210112; t=1679505325;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:from:to:cc:subject:date
-         :message-id:reply-to;
-        bh=rkv/eZYA1ncHp5FnV2ZWc3hgYnAx28S86QA9vmcXFCY=;
-        b=Y1mva2Bt3sUbKxLgEUS331CJbGxUc4z8kTQW8qiHWGhYlFKtm+d5z4sT40E5BeZAnU
-         zmTbCI7jbroe9NYBxGUmSli6LNVDPjND80ChbhWTqbqMQTmeQFWut9KmeBWK6Oze2lC/
-         XMSOorUzowjcU2xtHNrzoq2KH2pstW573lsB8WnzFVfhMaRkE9DfRr6WNyA7zC8DyxM5
-         ezxlCQtCmgPfCqlyksbIDKrgrRf3GiUR0yUd6xRU+MssyvH1FkYGDCerPctDto6lGHBz
-         8Y15jT3l6OnQMT6dkekgpPF5/XrSUY93u9g0B4U8+0dhNj+K7vmDen+jqdess+tpLnq/
-         gFrA==
-X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
-        d=1e100.net; s=20210112; t=1679505325;
-        h=content-transfer-encoding:mime-version:references:in-reply-to
-         :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc
-         :subject:date:message-id:reply-to;
-        bh=rkv/eZYA1ncHp5FnV2ZWc3hgYnAx28S86QA9vmcXFCY=;
-        b=Ym4+u8bbTQGNkewUBrLf+89vE0EFJBQp2f1crwUxZFboKTROF9ltZonY1CGepo7b0B
-         fkx3TbWQy5X65g3ScuieqtClCI8WanPeNBJ48+JipJYO3ODVNBxnVaTuW/0FOIcahfqe
-         sG5GvggHhzRz+Yeybsbnupmzxnw8Ez0BpMl3p7zcjHL7BGZDdOOX2Zbw3zfyYa5sg2nX
-         UXYJT36zy2h39gxUsy9QkhQ76CG3w6omniohZpYidpojpiDjbOy0nKFky4kUe+YyA1fF
-         4IBhjAm6mH+uh6wHSG1qj+NAXHs0xDDJps16PbJwAgL7Qt9K5WW+R/UAYPmHFgaRIHOw
-         /seA==
-X-Gm-Message-State: AO0yUKXRtoYO8Nfus6Ca8lhM39P1Xn6TGkhatEfoISd1YNOkTJJN2hW+
-        xRphLgxlzNfCLcVPlpGK9dk=
-X-Google-Smtp-Source: 
- AK7set9VnMEykugk8ZYnkXuqK41bX1dzlvKsAXHEjr8i2NZBld0buKhQLcGYEcwxnBgVTtC7eRGfXw==
-X-Received: by 2002:a1c:7c0b:0:b0:3e2:1dac:b071 with SMTP id
- x11-20020a1c7c0b000000b003e21dacb071mr178053wmc.13.1679505325582;
-        Wed, 22 Mar 2023 10:15:25 -0700 (PDT)
-Received: from atlantis.lan (255.red-79-146-124.dynamicip.rima-tde.net.
- [79.146.124.255])
-        by smtp.gmail.com with ESMTPSA id
- v10-20020a05600c470a00b003ee11ac2288sm8414333wmo.21.2023.03.22.10.15.24
-        (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256);
-        Wed, 22 Mar 2023 10:15:25 -0700 (PDT)
-From: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-To: mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
-        krzysztof.kozlowski+dt@linaro.org, p.zabel@pengutronix.de,
-        f.fainelli@gmail.com, jonas.gorski@gmail.com,
-        william.zhang@broadcom.com, linux-clk@vger.kernel.org,
-        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: =?utf-8?q?=C3=81lvaro_Fern=C3=A1ndez_Rojas?=  <noltari@gmail.com>
-Subject: [PATCH v4 4/4] clk: bcm: Add BCM63268 timer clock and reset driver
-Date: Wed, 22 Mar 2023 18:15:15 +0100
-Message-Id: <20230322171515.120353-5-noltari@gmail.com>
-X-Mailer: git-send-email 2.30.2
-In-Reply-To: <20230322171515.120353-1-noltari@gmail.com>
-References: <20230322171515.120353-1-noltari@gmail.com>
-MIME-Version: 1.0
-Precedence: bulk
-List-ID: <linux-clk.vger.kernel.org>
-X-Mailing-List: linux-clk@vger.kernel.org
-
-Add driver for BCM63268 timer clock and reset controller.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
----
- v4: add changes suggested by Stephen Boyd:
-  - Usage of of_device_get_match_data() isn't needed.
-  - Use devm_clk_hw_register_gate().
-  - Drop clk_hw_unregister_gate().
- v3: add missing <linux/io.h> include to fix build warning
- v2: add changes suggested by Stephen Boyd
-
- drivers/clk/bcm/Kconfig              |   9 ++
- drivers/clk/bcm/Makefile             |   1 +
- drivers/clk/bcm/clk-bcm63268-timer.c | 215 +++++++++++++++++++++++++++
- 3 files changed, 225 insertions(+)
- create mode 100644 drivers/clk/bcm/clk-bcm63268-timer.c
-
---- a/drivers/clk/bcm/Kconfig
-+++ b/drivers/clk/bcm/Kconfig
-@@ -37,6 +37,15 @@ config CLK_BCM_63XX_GATE
- 	  Enable common clock framework support for Broadcom BCM63xx DSL SoCs
- 	  based on the MIPS architecture
- 
-+config CLK_BCM63268_TIMER
-+	bool "Broadcom BCM63268 timer clock and reset support"
-+	depends on BMIPS_GENERIC || COMPILE_TEST
-+	default BMIPS_GENERIC
-+	select RESET_CONTROLLER
-+	help
-+	  Enable timer clock and reset support for Broadcom BCM63268 DSL SoCs
-+	  based on the MIPS architecture.
-+
- config CLK_BCM_KONA
- 	bool "Broadcom Kona CCU clock support"
- 	depends on ARCH_BCM_MOBILE || COMPILE_TEST
---- a/drivers/clk/bcm/Makefile
-+++ b/drivers/clk/bcm/Makefile
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_CLK_BCM_63XX)	+= clk-bcm63xx.o
- obj-$(CONFIG_CLK_BCM_63XX_GATE)	+= clk-bcm63xx-gate.o
-+obj-$(CONFIG_CLK_BCM63268_TIMER) += clk-bcm63268-timer.o
- obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona.o
- obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
- obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
---- /dev/null
-+++ b/drivers/clk/bcm/clk-bcm63268-timer.c
-@@ -0,0 +1,215 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * BCM63268 Timer Clock and Reset Controller Driver
-+ *
-+ * Copyright (C) 2023 Álvaro Fernández Rojas <noltari@gmail.com>
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/delay.h>
-+#include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset-controller.h>
-+
-+#include <dt-bindings/clock/bcm63268-clock.h>
-+
-+#define BCM63268_TIMER_RESET_SLEEP_MIN_US	10000
-+#define BCM63268_TIMER_RESET_SLEEP_MAX_US	20000
-+
-+struct bcm63268_tclkrst_hw {
-+	void __iomem *regs;
-+	spinlock_t lock;
-+
-+	struct reset_controller_dev rcdev;
-+	struct clk_hw_onecell_data data;
-+};
-+
-+struct bcm63268_tclk_table_entry {
-+	const char * const name;
-+	u8 bit;
-+};
-+
-+static const struct bcm63268_tclk_table_entry bcm63268_timer_clocks[] = {
-+	{
-+		.name = "ephy1",
-+		.bit = BCM63268_TCLK_EPHY1,
-+	}, {
-+		.name = "ephy2",
-+		.bit = BCM63268_TCLK_EPHY2,
-+	}, {
-+		.name = "ephy3",
-+		.bit = BCM63268_TCLK_EPHY3,
-+	}, {
-+		.name = "gphy1",
-+		.bit = BCM63268_TCLK_GPHY1,
-+	}, {
-+		.name = "dsl",
-+		.bit = BCM63268_TCLK_DSL,
-+	}, {
-+		.name = "wakeon_ephy",
-+		.bit = BCM63268_TCLK_WAKEON_EPHY,
-+	}, {
-+		.name = "wakeon_dsl",
-+		.bit = BCM63268_TCLK_WAKEON_DSL,
-+	}, {
-+		.name = "fap1_pll",
-+		.bit = BCM63268_TCLK_FAP1,
-+	}, {
-+		.name = "fap2_pll",
-+		.bit = BCM63268_TCLK_FAP2,
-+	}, {
-+		.name = "uto_50",
-+		.bit = BCM63268_TCLK_UTO_50,
-+	}, {
-+		.name = "uto_extin",
-+		.bit = BCM63268_TCLK_UTO_EXTIN,
-+	}, {
-+		.name = "usb_ref",
-+		.bit = BCM63268_TCLK_USB_REF,
-+	}, {
-+		/* sentinel */
-+	}
-+};
-+
-+static inline struct bcm63268_tclkrst_hw *
-+to_bcm63268_timer_reset(struct reset_controller_dev *rcdev)
-+{
-+	return container_of(rcdev, struct bcm63268_tclkrst_hw, rcdev);
-+}
-+
-+static int bcm63268_timer_reset_update(struct reset_controller_dev *rcdev,
-+				unsigned long id, bool assert)
-+{
-+	struct bcm63268_tclkrst_hw *reset = to_bcm63268_timer_reset(rcdev);
-+	unsigned long flags;
-+	uint32_t val;
-+
-+	spin_lock_irqsave(&reset->lock, flags);
-+	val = __raw_readl(reset->regs);
-+	if (assert)
-+		val &= ~BIT(id);
-+	else
-+		val |= BIT(id);
-+	__raw_writel(val, reset->regs);
-+	spin_unlock_irqrestore(&reset->lock, flags);
-+
-+	return 0;
-+}
-+
-+static int bcm63268_timer_reset_assert(struct reset_controller_dev *rcdev,
-+				unsigned long id)
-+{
-+	return bcm63268_timer_reset_update(rcdev, id, true);
-+}
-+
-+static int bcm63268_timer_reset_deassert(struct reset_controller_dev *rcdev,
-+				  unsigned long id)
-+{
-+	return bcm63268_timer_reset_update(rcdev, id, false);
-+}
-+
-+static int bcm63268_timer_reset_reset(struct reset_controller_dev *rcdev,
-+			       unsigned long id)
-+{
-+	bcm63268_timer_reset_update(rcdev, id, true);
-+	usleep_range(BCM63268_TIMER_RESET_SLEEP_MIN_US,
-+		     BCM63268_TIMER_RESET_SLEEP_MAX_US);
-+
-+	bcm63268_timer_reset_update(rcdev, id, false);
-+	/*
-+	 * Ensure component is taken out reset state by sleeping also after
-+	 * deasserting the reset. Otherwise, the component may not be ready
-+	 * for operation.
-+	 */
-+	usleep_range(BCM63268_TIMER_RESET_SLEEP_MIN_US,
-+		     BCM63268_TIMER_RESET_SLEEP_MAX_US);
-+
-+	return 0;
-+}
-+
-+static int bcm63268_timer_reset_status(struct reset_controller_dev *rcdev,
-+				unsigned long id)
-+{
-+	struct bcm63268_tclkrst_hw *reset = to_bcm63268_timer_reset(rcdev);
-+
-+	return !(__raw_readl(reset->regs) & BIT(id));
-+}
-+
-+static struct reset_control_ops bcm63268_timer_reset_ops = {
-+	.assert = bcm63268_timer_reset_assert,
-+	.deassert = bcm63268_timer_reset_deassert,
-+	.reset = bcm63268_timer_reset_reset,
-+	.status = bcm63268_timer_reset_status,
-+};
-+
-+static int bcm63268_tclk_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	const struct bcm63268_tclk_table_entry *entry;
-+	struct bcm63268_tclkrst_hw *hw;
-+	struct clk_hw *clk;
-+	u8 maxbit = 0;
-+	int i, ret;
-+
-+	for (entry = bcm63268_timer_clocks; entry->name; entry++)
-+		maxbit = max(maxbit, entry->bit);
-+	maxbit++;
-+
-+	hw = devm_kzalloc(&pdev->dev, struct_size(hw, data.hws, maxbit),
-+			  GFP_KERNEL);
-+	if (!hw)
-+		return -ENOMEM;
-+
-+	platform_set_drvdata(pdev, hw);
-+
-+	spin_lock_init(&hw->lock);
-+
-+	hw->data.num = maxbit;
-+	for (i = 0; i < maxbit; i++)
-+		hw->data.hws[i] = ERR_PTR(-ENODEV);
-+
-+	hw->regs = devm_platform_ioremap_resource(pdev, 0);
-+	if (IS_ERR(hw->regs))
-+		return PTR_ERR(hw->regs);
-+
-+	for (entry = bcm63268_timer_clocks; entry->name; entry++) {
-+		clk = devm_clk_hw_register_gate(dev, entry->name, NULL, 0,
-+						hw->regs, entry->bit,
-+						CLK_GATE_BIG_ENDIAN,
-+						&hw->lock);
-+		if (IS_ERR(clk))
-+			return PTR_ERR(clk);
-+
-+		hw->data.hws[entry->bit] = clk;
-+	}
-+
-+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
-+					  &hw->data);
-+	if (ret)
-+		return ret;
-+
-+	hw->rcdev.of_node = dev->of_node;
-+	hw->rcdev.ops = &bcm63268_timer_reset_ops;
-+
-+	ret = devm_reset_controller_register(dev, &hw->rcdev);
-+	if (ret)
-+		dev_err(dev, "Failed to register reset controller\n");
-+
-+	return 0;
-+}
-+
-+static const struct of_device_id bcm63268_tclk_dt_ids[] = {
-+	{ .compatible = "brcm,bcm63268-timer-clocks" },
-+	{ /* sentinel */ }
-+};
-+
-+static struct platform_driver bcm63268_tclk = {
-+	.probe = bcm63268_tclk_probe,
-+	.driver = {
-+		.name = "bcm63268-timer-clock",
-+		.of_match_table = bcm63268_tclk_dt_ids,
-+	},
-+};
-+builtin_platform_driver(bcm63268_tclk);
diff --git a/target/linux/generic/pending-6.1/860-serial-8250_mtk-track-busclk-state-to-avoid-bus-error.patch b/target/linux/generic/pending-6.1/860-serial-8250_mtk-track-busclk-state-to-avoid-bus-error.patch
deleted file mode 100644
index 013261cb8f11..000000000000
--- a/target/linux/generic/pending-6.1/860-serial-8250_mtk-track-busclk-state-to-avoid-bus-error.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 629c701fc39f1ada9416e0766a86729e83bde86c Mon Sep 17 00:00:00 2001
-Message-ID: <629c701fc39f1ada9416e0766a86729e83bde86c.1694465766.git.daniel@makrotopia.org>
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 11 Sep 2023 21:27:44 +0100
-Subject: [PATCH] serial: 8250_mtk: track busclk state to avoid bus error
-To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
-    Jiri Slaby <jirislaby@kernel.org>,
-    Matthias Brugger <matthias.bgg@gmail.com>,
-    AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>,
-    Daniel Golle <daniel@makrotopia.org>,
-    John Ogness <john.ogness@linutronix.de>,
-    Chen-Yu Tsai <wenst@chromium.org>,
-    Changqi Hu <changqi.hu@mediatek.com>,
-    linux-kernel@vger.kernel.org,
-    linux-serial@vger.kernel.org,
-    linux-arm-kernel@lists.infradead.org,
-    linux-mediatek@lists.infradead.org
-
-Commit e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and
-clock management") introduced polling a debug register to make sure
-the UART is idle before disabling the bus clock. However, at least on
-some MediaTek SoCs access to that very debug register requires the bus
-clock being enabled. Hence calling the suspend function while already
-in suspended state results in that register access triggering a bus
-error. In order to avoid that, track the state of the bus clock and
-only poll the debug register if not already in suspended state.
-
-Fixes: e32a83c70cf9 ("serial: 8250-mtk: modify mtk uart power and clock management")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/tty/serial/8250/8250_mtk.c | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
---- a/drivers/tty/serial/8250/8250_mtk.c
-+++ b/drivers/tty/serial/8250/8250_mtk.c
-@@ -32,7 +32,7 @@
- #define MTK_UART_RXTRI_AD	0x14	/* RX Trigger address */
- #define MTK_UART_FRACDIV_L	0x15	/* Fractional divider LSB address */
- #define MTK_UART_FRACDIV_M	0x16	/* Fractional divider MSB address */
--#define MTK_UART_DEBUG0	0x18
-+#define MTK_UART_DEBUG0		0x18
- #define MTK_UART_IER_XOFFI	0x20	/* Enable XOFF character interrupt */
- #define MTK_UART_IER_RTSI	0x40	/* Enable RTS Modem status interrupt */
- #define MTK_UART_IER_CTSI	0x80	/* Enable CTS Modem status interrupt */
-@@ -422,13 +422,12 @@ static int __maybe_unused mtk8250_runtim
- 	struct mtk8250_data *data = dev_get_drvdata(dev);
- 	struct uart_8250_port *up = serial8250_get_port(data->line);
- 
--	/* wait until UART in idle status */
--	while
--		(serial_in(up, MTK_UART_DEBUG0));
--
- 	if (data->clk_count == 0U) {
- 		dev_dbg(dev, "%s clock count is 0\n", __func__);
- 	} else {
-+		/* wait until UART in idle status */
-+		while
-+			(serial_in(up, MTK_UART_DEBUG0));
- 		clk_disable_unprepare(data->bus_clk);
- 		data->clk_count--;
- 	}
diff --git a/target/linux/generic/pending-6.1/870-ARM-dts-nxp-imx7d-pico-add-cpu-supply-nodes.patch b/target/linux/generic/pending-6.1/870-ARM-dts-nxp-imx7d-pico-add-cpu-supply-nodes.patch
deleted file mode 100644
index e25389363ffd..000000000000
--- a/target/linux/generic/pending-6.1/870-ARM-dts-nxp-imx7d-pico-add-cpu-supply-nodes.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From d0562705bcd4cb9849156f095b2af0ec1bb53b56 Mon Sep 17 00:00:00 2001
-From: Lech Perczak <lech.perczak@gmail.com>
-Date: Fri, 17 Nov 2023 21:33:04 +0100
-Subject: [PATCH] ARM: dts: nxp: imx7d-pico: add cpu-supply nodes
-
-The PICO-IMX7D SoM has the usual power supply configuration using
-output sw1a of PF3000 PMIC, which was defined in downstream derivative
-of linux-imx (see link) in the sources for "Android Things" devkit.
-It is required to support CPU frequency scaling.
-
-Map the respective "cpu-supply" nodes of each core to sw1a of the PMIC.
-
-Enabling them causes cpufreq-dt, and imx-thermal drivers to probe
-successfully, and CPU frequency scaling to function.
-
-Link: https://android.googlesource.com/platform/hardware/bsp/kernel/nxp/imx-v4.1/+/o-iot-preview-5/arch/arm/boot/dts/imx7d-pico.dtsi#849
-
-Cc: Fabio Estevam <festevam@gmail.com>
-Cc: Shawn Guo <shawnguo@kernel.org>
-Cc: Sascha Hauer <s.hauer@pengutronix.de>
-
-Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
----
- arch/arm/boot/dts/imx7d-pico.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/imx7d-pico.dtsi
-+++ b/arch/arm/boot/dts/imx7d-pico.dtsi
-@@ -108,6 +108,14 @@
- 	assigned-clock-rates = <0>, <32768>;
- };
- 
-+&cpu0 {
-+	cpu-supply = <&sw1a_reg>;
-+};
-+
-+&cpu1 {
-+	cpu-supply = <&sw1a_reg>;
-+};
-+
- &ecspi3 {
- 	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
- 	pinctrl-names = "default";
diff --git a/target/linux/generic/pending-6.1/880-01-dt-bindings-leds-add-LED_FUNCTION_MOBILE-for-mobile-.patch b/target/linux/generic/pending-6.1/880-01-dt-bindings-leds-add-LED_FUNCTION_MOBILE-for-mobile-.patch
deleted file mode 100644
index 3321b03f2872..000000000000
--- a/target/linux/generic/pending-6.1/880-01-dt-bindings-leds-add-LED_FUNCTION_MOBILE-for-mobile-.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 38eb5b3370c29515d2ce92adac2d6eba96f276f5 Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Wed, 20 Mar 2024 15:32:18 +0900
-Subject: [PATCH v2 1/2] dt-bindings: leds: add LED_FUNCTION_MOBILE for mobile
- network
-
-Add LED_FUNCTION_MOBILE for LEDs that indicate status of mobile network
-connection. This is useful to distinguish those LEDs from LEDs that
-indicates status of wired "wan" connection.
-
-example (on stock fw):
-
-IIJ SA-W2 has "Mobile" LEDs that indicate status (no signal, too low,
-low, good) of mobile network connection via dongle connected to USB
-port.
-
-- no signal: (none, turned off)
--   too low: green:mobile & red:mobile (amber, blink)
--       low: green:mobile & red:mobile (amber, turned on)
--      good: green:mobile (turned on)
-
-Suggested-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
----
- include/dt-bindings/leds/common.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/dt-bindings/leds/common.h
-+++ b/include/dt-bindings/leds/common.h
-@@ -90,6 +90,7 @@
- #define LED_FUNCTION_INDICATOR "indicator"
- #define LED_FUNCTION_LAN "lan"
- #define LED_FUNCTION_MAIL "mail"
-+#define LED_FUNCTION_MOBILE "mobile"
- #define LED_FUNCTION_MTD "mtd"
- #define LED_FUNCTION_PANIC "panic"
- #define LED_FUNCTION_PROGRAMMING "programming"
diff --git a/target/linux/generic/pending-6.1/880-02-dt-bindings-leds-add-LED_FUNCTION_SPEED_-for-link-sp.patch b/target/linux/generic/pending-6.1/880-02-dt-bindings-leds-add-LED_FUNCTION_SPEED_-for-link-sp.patch
deleted file mode 100644
index ab27cd33997b..000000000000
--- a/target/linux/generic/pending-6.1/880-02-dt-bindings-leds-add-LED_FUNCTION_SPEED_-for-link-sp.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From e22afe910afcfb51b6ba6a0ae776939959727f54 Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Wed, 20 Mar 2024 15:59:06 +0900
-Subject: [PATCH v2 2/2] dt-bindings: leds: add LED_FUNCTION_SPEED_* for link
- speed on LAN/WAN
-
-Add LED_FUNCTION_SPEED_LAN and LED_FUNCTION_SPEED_WAN for LEDs that
-indicate link speed of ethernet ports on LAN/WAN. This is useful to
-distinguish those LEDs from LEDs that indicate link status (up/down).
-
-example:
-
-Fortinet FortiGate 30E/50E have LEDs that indicate link speed on each
-of the ethernet ports in addition to LEDs that indicate link status
-(up/down).
-
-- 1000 Mbps: green:speed-(lan|wan)-N
--  100 Mbps: amber:speed-(lan|wan)-N
--   10 Mbps: (none, turned off)
-
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
----
- include/dt-bindings/leds/common.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/dt-bindings/leds/common.h
-+++ b/include/dt-bindings/leds/common.h
-@@ -96,6 +96,8 @@
- #define LED_FUNCTION_PROGRAMMING "programming"
- #define LED_FUNCTION_RX "rx"
- #define LED_FUNCTION_SD "sd"
-+#define LED_FUNCTION_SPEED_LAN "speed-lan"
-+#define LED_FUNCTION_SPEED_WAN "speed-wan"
- #define LED_FUNCTION_STANDBY "standby"
- #define LED_FUNCTION_TORCH "torch"
- #define LED_FUNCTION_TX "tx"
diff --git a/target/linux/generic/pending-6.1/920-mangle_bootargs.patch b/target/linux/generic/pending-6.1/920-mangle_bootargs.patch
deleted file mode 100644
index f239c5824fd1..000000000000
--- a/target/linux/generic/pending-6.1/920-mangle_bootargs.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default
-
-Enabling this option renames the bootloader supplied root=
-and rootfstype= variables, which might have to be know but
-would break the automatisms OpenWrt uses.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- init/Kconfig |  9 +++++++++
- init/main.c  | 24 ++++++++++++++++++++++++
- 2 files changed, 33 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1836,6 +1836,15 @@ config EMBEDDED
- 	  an embedded system so certain expert options are available
- 	  for configuration.
- 
-+config MANGLE_BOOTARGS
-+	bool "Rename offending bootargs"
-+	depends on EXPERT
-+	help
-+	  Sometimes the bootloader passed bogus root= and rootfstype=
-+	  parameters to the kernel, and while you want to ignore them,
-+	  you need to know the values f.e. to support dual firmware
-+	  layouts on the flash.
-+
- config HAVE_PERF_EVENTS
- 	bool
- 	help
---- a/init/main.c
-+++ b/init/main.c
-@@ -611,6 +611,29 @@ static inline void setup_nr_cpu_ids(void
- static inline void smp_prepare_cpus(unsigned int maxcpus) { }
- #endif
- 
-+#ifdef CONFIG_MANGLE_BOOTARGS
-+static void __init mangle_bootargs(char *command_line)
-+{
-+	char *rootdev;
-+	char *rootfs;
-+
-+	rootdev = strstr(command_line, "root=/dev/mtdblock");
-+
-+	if (rootdev)
-+		strncpy(rootdev, "mangled_rootblock=", 18);
-+
-+	rootfs = strstr(command_line, "rootfstype");
-+
-+	if (rootfs)
-+		strncpy(rootfs, "mangled_fs", 10);
-+
-+}
-+#else
-+static void __init mangle_bootargs(char *command_line)
-+{
-+}
-+#endif
-+
- /*
-  * We need to store the untouched command line for future reference.
-  * We also need to store the touched command line since the parameter
-@@ -960,6 +983,7 @@ asmlinkage __visible void __init __no_sa
- 	pr_notice("%s", linux_banner);
- 	early_security_init();
- 	setup_arch(&command_line);
-+	mangle_bootargs(command_line);
- 	setup_boot_config();
- 	setup_command_line(command_line);
- 	setup_nr_cpu_ids();
diff --git a/target/linux/generic/pending-6.1/980-tools-thermal-tmon-Fix-compilation-warning-for-wrong.patch b/target/linux/generic/pending-6.1/980-tools-thermal-tmon-Fix-compilation-warning-for-wrong.patch
deleted file mode 100644
index 6a0a19987fad..000000000000
--- a/target/linux/generic/pending-6.1/980-tools-thermal-tmon-Fix-compilation-warning-for-wrong.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From a7a94ca21ac0f347f683d33c72b4aab57ce5eec3 Mon Sep 17 00:00:00 2001
-From: Florian Eckert <fe@dev.tdt.de>
-Date: Mon, 20 Nov 2023 11:13:20 +0100
-Subject: [PATCH] tools/thermal/tmon: Fix compilation warning for wrong format
-
-The following warnings are shown during compilation:
-
-tui.c: In function 'show_cooling_device':
- tui.c:216:40: warning: format '%d' expects argument of type 'int', but
-argument 7 has type 'long unsigned int' [-Wformat=]
-   216 |                         "%02d %12.12s%6d %6d",
-       |                                      ~~^
-       |                                        |
-       |                                        int
-       |                                      %6ld
- ......
-   219 |                         ptdata.cdi[j].cur_state,
-       |                         ~~~~~~~~~~~~~~~~~~~~~~~
-       |                                      |
-       |                                      long unsigned int
- tui.c:216:44: warning: format '%d' expects argument of type 'int', but
-argument 8 has type 'long unsigned int' [-Wformat=]
-   216 |                         "%02d %12.12s%6d %6d",
-       |                                          ~~^
-       |                                            |
-       |                                            int
-       |                                          %6ld
- ......
-   220 |                         ptdata.cdi[j].max_state);
-       |                         ~~~~~~~~~~~~~~~~~~~~~~~
-       |                                      |
-       |                                      long unsigned int
-
-To fix this, the correct string format must be used for printing.
-
-Signed-off-by: Florian Eckert <fe@dev.tdt.de>
----
- tools/thermal/tmon/tui.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/tools/thermal/tmon/tui.c
-+++ b/tools/thermal/tmon/tui.c
-@@ -213,7 +213,7 @@ void show_cooling_device(void)
- 		 * cooling device instances. skip unused idr.
- 		 */
- 		mvwprintw(cooling_device_window, j + 2, 1,
--			"%02d %12.12s%6d %6d",
-+			"%02d %12.12s%6lu %6lu",
- 			ptdata.cdi[j].instance,
- 			ptdata.cdi[j].type,
- 			ptdata.cdi[j].cur_state,
-- 
2.30.2