From 3ead1ba31b24cb521a7256e19e6243f951f46ec8 Mon Sep 17 00:00:00 2001 From: Matt Gomboc Date: Fri, 1 Mar 2013 19:53:30 -0300 Subject: [PATCH] [media] cx231xx : Add support for OTG102 aka EZGrabber2 Thanks for the response, I have done as you suggested. Below is an updated patch for the OTG102 device against http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/cx231xx, kernel version 3.8. With further testing it appears the extra clauses in cx231xx-cards.c were not necessary (in static in cx231xx_init_dev and static int cx231xx_usb_probe), so those have been also been removed. Signed-off-by: Matt Gomboc Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/cx231xx/cx231xx-avcore.c | 2 ++ drivers/media/usb/cx231xx/cx231xx-cards.c | 35 ++++++++++++++++++++++ drivers/media/usb/cx231xx/cx231xx.h | 1 + 3 files changed, 38 insertions(+) diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c index 2e51fb9fd21c..235ba657d52e 100644 --- a/drivers/media/usb/cx231xx/cx231xx-avcore.c +++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c @@ -357,6 +357,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev, case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: + case CX231XX_BOARD_OTG102: if (avmode == POLARIS_AVMODE_ANALOGT_TV) { while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | FLD_PWRDN_ENABLE_PLL)) { @@ -1720,6 +1721,7 @@ int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard) case CX231XX_BOARD_CNXT_RDU_250: case CX231XX_BOARD_CNXT_VIDEO_GRABBER: case CX231XX_BOARD_HAUPPAUGE_EXETER: + case CX231XX_BOARD_OTG102: func_mode = 0x03; break; case CX231XX_BOARD_CNXT_RDE_253S: diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index b7b1acd7e7b0..13249e5a7891 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -634,6 +634,39 @@ struct cx231xx_board cx231xx_boards[] = { .gpio = NULL, } }, }, + [CX231XX_BOARD_OTG102] = { + .name = "Geniatech OTG102", + .tuner_type = TUNER_ABSENT, + .decoder = CX231XX_AVDECODER, + .output_mode = OUT_MODE_VIP11, + .ctl_pin_status_mask = 0xFFFFFFC4, + .agc_analog_digital_select_gpio = 0x0c, + /* According with PV CxPlrCAP.inf file */ + .gpio_pin_status_mask = 0x4001000, + .norm = V4L2_STD_NTSC, + .no_alt_vanc = 1, + .external_av = 1, + .dont_use_port_3 = 1, + /*.has_417 = 1, */ + /* This board is believed to have a hardware encoding chip + * supporting mpeg1/2/4, but as the 417 is apparently not + * working for the reference board it is not here either. */ + + .input = {{ + .type = CX231XX_VMUX_COMPOSITE1, + .vmux = CX231XX_VIN_2_1, + .amux = CX231XX_AMUX_LINE_IN, + .gpio = NULL, + }, { + .type = CX231XX_VMUX_SVIDEO, + .vmux = CX231XX_VIN_1_1 | + (CX231XX_VIN_1_2 << 8) | + CX25840_SVIDEO_ON, + .amux = CX231XX_AMUX_LINE_IN, + .gpio = NULL, + } + }, + }, }; const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards); @@ -675,6 +708,8 @@ struct usb_device_id cx231xx_id_table[] = { .driver_info = CX231XX_BOARD_ICONBIT_U100}, {USB_DEVICE(0x0fd9, 0x0037), .driver_info = CX231XX_BOARD_ELGATO_VIDEO_CAPTURE_V2}, + {USB_DEVICE(0x1f4d, 0x0102), + .driver_info = CX231XX_BOARD_OTG102}, {}, }; diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h index a8e50d2d491c..dff3f1d73f28 100644 --- a/drivers/media/usb/cx231xx/cx231xx.h +++ b/drivers/media/usb/cx231xx/cx231xx.h @@ -71,6 +71,7 @@ #define CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL 14 #define CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC 15 #define CX231XX_BOARD_ELGATO_VIDEO_CAPTURE_V2 16 +#define CX231XX_BOARD_OTG102 17 /* Limits minimum and default number of buffers */ #define CX231XX_MIN_BUF 4 -- 2.30.2