From 3e0f331c05d72f140715c1e9fca991927e44d422 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 29 Apr 2008 12:35:08 +0000 Subject: [PATCH] Clean up smsc911x driver Replace direct register address derefencing with accessor functions. Restrict explicitly 32-bit bus-width, extend affected configurations respectively. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Ben Warren --- drivers/net/smc911x.c | 717 ++++++++++++++++---------------- include/configs/imx31_litekit.h | 1 + include/configs/imx31_phycore.h | 1 + 3 files changed, 370 insertions(+), 349 deletions(-) diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 134304e0b2..d22c8895da 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -30,321 +30,332 @@ #include #include -#define mdelay(n) udelay((n)*1000) +#ifdef CONFIG_DRIVER_SMC911X_32_BIT +static inline u32 reg_read(u32 addr) +{ + return *(volatile u32*)addr; +} +static inline void reg_write(u32 addr, u32 val) +{ + *(volatile u32*)addr = val; +} +#else +#error "SMC911X: Only 32-bit bus is supported" +#endif -#define __REG(x) (*((volatile u32 *)(x))) +#define mdelay(n) udelay((n)*1000) /* Below are the register offsets and bit definitions * of the Lan911x memory space */ -#define RX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00) - -#define TX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20) -#define TX_CMD_A_INT_ON_COMP (0x80000000) -#define TX_CMD_A_INT_BUF_END_ALGN (0x03000000) -#define TX_CMD_A_INT_4_BYTE_ALGN (0x00000000) -#define TX_CMD_A_INT_16_BYTE_ALGN (0x01000000) -#define TX_CMD_A_INT_32_BYTE_ALGN (0x02000000) -#define TX_CMD_A_INT_DATA_OFFSET (0x001F0000) -#define TX_CMD_A_INT_FIRST_SEG (0x00002000) -#define TX_CMD_A_INT_LAST_SEG (0x00001000) -#define TX_CMD_A_BUF_SIZE (0x000007FF) -#define TX_CMD_B_PKT_TAG (0xFFFF0000) -#define TX_CMD_B_ADD_CRC_DISABLE (0x00002000) -#define TX_CMD_B_DISABLE_PADDING (0x00001000) -#define TX_CMD_B_PKT_BYTE_LENGTH (0x000007FF) - -#define RX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x40) -#define RX_STS_PKT_LEN (0x3FFF0000) -#define RX_STS_ES (0x00008000) -#define RX_STS_BCST (0x00002000) -#define RX_STS_LEN_ERR (0x00001000) -#define RX_STS_RUNT_ERR (0x00000800) -#define RX_STS_MCAST (0x00000400) -#define RX_STS_TOO_LONG (0x00000080) -#define RX_STS_COLL (0x00000040) -#define RX_STS_ETH_TYPE (0x00000020) -#define RX_STS_WDOG_TMT (0x00000010) -#define RX_STS_MII_ERR (0x00000008) -#define RX_STS_DRIBBLING (0x00000004) -#define RX_STS_CRC_ERR (0x00000002) -#define RX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x44) -#define TX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x48) -#define TX_STS_TAG (0xFFFF0000) -#define TX_STS_ES (0x00008000) -#define TX_STS_LOC (0x00000800) -#define TX_STS_NO_CARR (0x00000400) -#define TX_STS_LATE_COLL (0x00000200) -#define TX_STS_MANY_COLL (0x00000100) -#define TX_STS_COLL_CNT (0x00000078) -#define TX_STS_MANY_DEFER (0x00000004) -#define TX_STS_UNDERRUN (0x00000002) -#define TX_STS_DEFERRED (0x00000001) -#define TX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C) -#define ID_REV __REG(CONFIG_DRIVER_SMC911X_BASE + 0x50) -#define ID_REV_CHIP_ID (0xFFFF0000) /* RO */ -#define ID_REV_REV_ID (0x0000FFFF) /* RO */ - -#define INT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x54) -#define INT_CFG_INT_DEAS (0xFF000000) /* R/W */ -#define INT_CFG_INT_DEAS_CLR (0x00004000) -#define INT_CFG_INT_DEAS_STS (0x00002000) -#define INT_CFG_IRQ_INT (0x00001000) /* RO */ -#define INT_CFG_IRQ_EN (0x00000100) /* R/W */ -#define INT_CFG_IRQ_POL (0x00000010) /* R/W Not Affected by SW Reset */ -#define INT_CFG_IRQ_TYPE (0x00000001) /* R/W Not Affected by SW Reset */ - -#define INT_STS __REG(CONFIG_DRIVER_SMC911X_BASE + 0x58) -#define INT_STS_SW_INT (0x80000000) /* R/WC */ -#define INT_STS_TXSTOP_INT (0x02000000) /* R/WC */ -#define INT_STS_RXSTOP_INT (0x01000000) /* R/WC */ -#define INT_STS_RXDFH_INT (0x00800000) /* R/WC */ -#define INT_STS_RXDF_INT (0x00400000) /* R/WC */ -#define INT_STS_TX_IOC (0x00200000) /* R/WC */ -#define INT_STS_RXD_INT (0x00100000) /* R/WC */ -#define INT_STS_GPT_INT (0x00080000) /* R/WC */ -#define INT_STS_PHY_INT (0x00040000) /* RO */ -#define INT_STS_PME_INT (0x00020000) /* R/WC */ -#define INT_STS_TXSO (0x00010000) /* R/WC */ -#define INT_STS_RWT (0x00008000) /* R/WC */ -#define INT_STS_RXE (0x00004000) /* R/WC */ -#define INT_STS_TXE (0x00002000) /* R/WC */ -/*#define INT_STS_ERX (0x00001000)*/ /* R/WC */ -#define INT_STS_TDFU (0x00000800) /* R/WC */ -#define INT_STS_TDFO (0x00000400) /* R/WC */ -#define INT_STS_TDFA (0x00000200) /* R/WC */ -#define INT_STS_TSFF (0x00000100) /* R/WC */ -#define INT_STS_TSFL (0x00000080) /* R/WC */ -/*#define INT_STS_RXDF (0x00000040)*/ /* R/WC */ -#define INT_STS_RDFO (0x00000040) /* R/WC */ -#define INT_STS_RDFL (0x00000020) /* R/WC */ -#define INT_STS_RSFF (0x00000010) /* R/WC */ -#define INT_STS_RSFL (0x00000008) /* R/WC */ -#define INT_STS_GPIO2_INT (0x00000004) /* R/WC */ -#define INT_STS_GPIO1_INT (0x00000002) /* R/WC */ -#define INT_STS_GPIO0_INT (0x00000001) /* R/WC */ -#define INT_EN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C) -#define INT_EN_SW_INT_EN (0x80000000) /* R/W */ -#define INT_EN_TXSTOP_INT_EN (0x02000000) /* R/W */ -#define INT_EN_RXSTOP_INT_EN (0x01000000) /* R/W */ -#define INT_EN_RXDFH_INT_EN (0x00800000) /* R/W */ -/*#define INT_EN_RXDF_INT_EN (0x00400000)*/ /* R/W */ -#define INT_EN_TIOC_INT_EN (0x00200000) /* R/W */ -#define INT_EN_RXD_INT_EN (0x00100000) /* R/W */ -#define INT_EN_GPT_INT_EN (0x00080000) /* R/W */ -#define INT_EN_PHY_INT_EN (0x00040000) /* R/W */ -#define INT_EN_PME_INT_EN (0x00020000) /* R/W */ -#define INT_EN_TXSO_EN (0x00010000) /* R/W */ -#define INT_EN_RWT_EN (0x00008000) /* R/W */ -#define INT_EN_RXE_EN (0x00004000) /* R/W */ -#define INT_EN_TXE_EN (0x00002000) /* R/W */ -/*#define INT_EN_ERX_EN (0x00001000)*/ /* R/W */ -#define INT_EN_TDFU_EN (0x00000800) /* R/W */ -#define INT_EN_TDFO_EN (0x00000400) /* R/W */ -#define INT_EN_TDFA_EN (0x00000200) /* R/W */ -#define INT_EN_TSFF_EN (0x00000100) /* R/W */ -#define INT_EN_TSFL_EN (0x00000080) /* R/W */ -/*#define INT_EN_RXDF_EN (0x00000040)*/ /* R/W */ -#define INT_EN_RDFO_EN (0x00000040) /* R/W */ -#define INT_EN_RDFL_EN (0x00000020) /* R/W */ -#define INT_EN_RSFF_EN (0x00000010) /* R/W */ -#define INT_EN_RSFL_EN (0x00000008) /* R/W */ -#define INT_EN_GPIO2_INT (0x00000004) /* R/W */ -#define INT_EN_GPIO1_INT (0x00000002) /* R/W */ -#define INT_EN_GPIO0_INT (0x00000001) /* R/W */ - -#define BYTE_TEST __REG(CONFIG_DRIVER_SMC911X_BASE + 0x64) -#define FIFO_INT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x68) -#define FIFO_INT_TX_AVAIL_LEVEL (0xFF000000) /* R/W */ -#define FIFO_INT_TX_STS_LEVEL (0x00FF0000) /* R/W */ -#define FIFO_INT_RX_AVAIL_LEVEL (0x0000FF00) /* R/W */ -#define FIFO_INT_RX_STS_LEVEL (0x000000FF) /* R/W */ - -#define RX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C) -#define RX_CFG_RX_END_ALGN (0xC0000000) /* R/W */ -#define RX_CFG_RX_END_ALGN4 (0x00000000) /* R/W */ -#define RX_CFG_RX_END_ALGN16 (0x40000000) /* R/W */ -#define RX_CFG_RX_END_ALGN32 (0x80000000) /* R/W */ -#define RX_CFG_RX_DMA_CNT (0x0FFF0000) /* R/W */ -#define RX_CFG_RX_DUMP (0x00008000) /* R/W */ -#define RX_CFG_RXDOFF (0x00001F00) /* R/W */ -/*#define RX_CFG_RXBAD (0x00000001)*/ /* R/W */ - -#define TX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x70) -/*#define TX_CFG_TX_DMA_LVL (0xE0000000)*/ /* R/W */ -/*#define TX_CFG_TX_DMA_CNT (0x0FFF0000)*/ /* R/W Self Clearing */ -#define TX_CFG_TXS_DUMP (0x00008000) /* Self Clearing */ -#define TX_CFG_TXD_DUMP (0x00004000) /* Self Clearing */ -#define TX_CFG_TXSAO (0x00000004) /* R/W */ -#define TX_CFG_TX_ON (0x00000002) /* R/W */ -#define TX_CFG_STOP_TX (0x00000001) /* Self Clearing */ - -#define HW_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x74) -#define HW_CFG_TTM (0x00200000) /* R/W */ -#define HW_CFG_SF (0x00100000) /* R/W */ -#define HW_CFG_TX_FIF_SZ (0x000F0000) /* R/W */ -#define HW_CFG_TR (0x00003000) /* R/W */ -#define HW_CFG_PHY_CLK_SEL (0x00000060) /* R/W */ -#define HW_CFG_PHY_CLK_SEL_INT_PHY (0x00000000) /* R/W */ -#define HW_CFG_PHY_CLK_SEL_EXT_PHY (0x00000020) /* R/W */ -#define HW_CFG_PHY_CLK_SEL_CLK_DIS (0x00000040) /* R/W */ -#define HW_CFG_SMI_SEL (0x00000010) /* R/W */ -#define HW_CFG_EXT_PHY_DET (0x00000008) /* RO */ -#define HW_CFG_EXT_PHY_EN (0x00000004) /* R/W */ -#define HW_CFG_32_16_BIT_MODE (0x00000004) /* RO */ -#define HW_CFG_SRST_TO (0x00000002) /* RO */ -#define HW_CFG_SRST (0x00000001) /* Self Clearing */ - -#define RX_DP_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x78) -#define RX_DP_CTRL_RX_FFWD (0x80000000) /* R/W */ -#define RX_DP_CTRL_FFWD_BUSY (0x80000000) /* RO */ - -#define RX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C) -#define RX_FIFO_INF_RXSUSED (0x00FF0000) /* RO */ -#define RX_FIFO_INF_RXDUSED (0x0000FFFF) /* RO */ - -#define TX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x80) -#define TX_FIFO_INF_TSUSED (0x00FF0000) /* RO */ -#define TX_FIFO_INF_TDFREE (0x0000FFFF) /* RO */ - -#define PMT_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x84) -#define PMT_CTRL_PM_MODE (0x00003000) /* Self Clearing */ -#define PMT_CTRL_PHY_RST (0x00000400) /* Self Clearing */ -#define PMT_CTRL_WOL_EN (0x00000200) /* R/W */ -#define PMT_CTRL_ED_EN (0x00000100) /* R/W */ -#define PMT_CTRL_PME_TYPE (0x00000040) /* R/W Not Affected by SW Reset */ -#define PMT_CTRL_WUPS (0x00000030) /* R/WC */ -#define PMT_CTRL_WUPS_NOWAKE (0x00000000) /* R/WC */ -#define PMT_CTRL_WUPS_ED (0x00000010) /* R/WC */ -#define PMT_CTRL_WUPS_WOL (0x00000020) /* R/WC */ -#define PMT_CTRL_WUPS_MULTI (0x00000030) /* R/WC */ -#define PMT_CTRL_PME_IND (0x00000008) /* R/W */ -#define PMT_CTRL_PME_POL (0x00000004) /* R/W */ -#define PMT_CTRL_PME_EN (0x00000002) /* R/W Not Affected by SW Reset */ -#define PMT_CTRL_READY (0x00000001) /* RO */ - -#define GPIO_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x88) -#define GPIO_CFG_LED3_EN (0x40000000) /* R/W */ -#define GPIO_CFG_LED2_EN (0x20000000) /* R/W */ -#define GPIO_CFG_LED1_EN (0x10000000) /* R/W */ -#define GPIO_CFG_GPIO2_INT_POL (0x04000000) /* R/W */ -#define GPIO_CFG_GPIO1_INT_POL (0x02000000) /* R/W */ -#define GPIO_CFG_GPIO0_INT_POL (0x01000000) /* R/W */ -#define GPIO_CFG_EEPR_EN (0x00700000) /* R/W */ -#define GPIO_CFG_GPIOBUF2 (0x00040000) /* R/W */ -#define GPIO_CFG_GPIOBUF1 (0x00020000) /* R/W */ -#define GPIO_CFG_GPIOBUF0 (0x00010000) /* R/W */ -#define GPIO_CFG_GPIODIR2 (0x00000400) /* R/W */ -#define GPIO_CFG_GPIODIR1 (0x00000200) /* R/W */ -#define GPIO_CFG_GPIODIR0 (0x00000100) /* R/W */ -#define GPIO_CFG_GPIOD4 (0x00000010) /* R/W */ -#define GPIO_CFG_GPIOD3 (0x00000008) /* R/W */ -#define GPIO_CFG_GPIOD2 (0x00000004) /* R/W */ -#define GPIO_CFG_GPIOD1 (0x00000002) /* R/W */ -#define GPIO_CFG_GPIOD0 (0x00000001) /* R/W */ - -#define GPT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C) -#define GPT_CFG_TIMER_EN (0x20000000) /* R/W */ -#define GPT_CFG_GPT_LOAD (0x0000FFFF) /* R/W */ - -#define GPT_CNT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x90) -#define GPT_CNT_GPT_CNT (0x0000FFFF) /* RO */ - -#define ENDIAN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x98) -#define FREE_RUN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C) -#define RX_DROP __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0) -#define MAC_CSR_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4) -#define MAC_CSR_CMD_CSR_BUSY (0x80000000) /* Self Clearing */ -#define MAC_CSR_CMD_R_NOT_W (0x40000000) /* R/W */ -#define MAC_CSR_CMD_CSR_ADDR (0x000000FF) /* R/W */ - -#define MAC_CSR_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8) -#define AFC_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC) -#define AFC_CFG_AFC_HI (0x00FF0000) /* R/W */ -#define AFC_CFG_AFC_LO (0x0000FF00) /* R/W */ -#define AFC_CFG_BACK_DUR (0x000000F0) /* R/W */ -#define AFC_CFG_FCMULT (0x00000008) /* R/W */ -#define AFC_CFG_FCBRD (0x00000004) /* R/W */ -#define AFC_CFG_FCADD (0x00000002) /* R/W */ -#define AFC_CFG_FCANY (0x00000001) /* R/W */ - -#define E2P_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0) -#define E2P_CMD_EPC_BUSY (0x80000000) /* Self Clearing */ -#define E2P_CMD_EPC_CMD (0x70000000) /* R/W */ -#define E2P_CMD_EPC_CMD_READ (0x00000000) /* R/W */ -#define E2P_CMD_EPC_CMD_EWDS (0x10000000) /* R/W */ -#define E2P_CMD_EPC_CMD_EWEN (0x20000000) /* R/W */ -#define E2P_CMD_EPC_CMD_WRITE (0x30000000) /* R/W */ -#define E2P_CMD_EPC_CMD_WRAL (0x40000000) /* R/W */ -#define E2P_CMD_EPC_CMD_ERASE (0x50000000) /* R/W */ -#define E2P_CMD_EPC_CMD_ERAL (0x60000000) /* R/W */ -#define E2P_CMD_EPC_CMD_RELOAD (0x70000000) /* R/W */ -#define E2P_CMD_EPC_TIMEOUT (0x00000200) /* RO */ -#define E2P_CMD_MAC_ADDR_LOADED (0x00000100) /* RO */ -#define E2P_CMD_EPC_ADDR (0x000000FF) /* R/W */ - -#define E2P_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4) -#define E2P_DATA_EEPROM_DATA (0x000000FF) /* R/W */ +#define RX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x00) + +#define TX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x20) +#define TX_CMD_A_INT_ON_COMP 0x80000000 +#define TX_CMD_A_INT_BUF_END_ALGN 0x03000000 +#define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000 +#define TX_CMD_A_INT_16_BYTE_ALGN 0x01000000 +#define TX_CMD_A_INT_32_BYTE_ALGN 0x02000000 +#define TX_CMD_A_INT_DATA_OFFSET 0x001F0000 +#define TX_CMD_A_INT_FIRST_SEG 0x00002000 +#define TX_CMD_A_INT_LAST_SEG 0x00001000 +#define TX_CMD_A_BUF_SIZE 0x000007FF +#define TX_CMD_B_PKT_TAG 0xFFFF0000 +#define TX_CMD_B_ADD_CRC_DISABLE 0x00002000 +#define TX_CMD_B_DISABLE_PADDING 0x00001000 +#define TX_CMD_B_PKT_BYTE_LENGTH 0x000007FF + +#define RX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x40) +#define RX_STS_PKT_LEN 0x3FFF0000 +#define RX_STS_ES 0x00008000 +#define RX_STS_BCST 0x00002000 +#define RX_STS_LEN_ERR 0x00001000 +#define RX_STS_RUNT_ERR 0x00000800 +#define RX_STS_MCAST 0x00000400 +#define RX_STS_TOO_LONG 0x00000080 +#define RX_STS_COLL 0x00000040 +#define RX_STS_ETH_TYPE 0x00000020 +#define RX_STS_WDOG_TMT 0x00000010 +#define RX_STS_MII_ERR 0x00000008 +#define RX_STS_DRIBBLING 0x00000004 +#define RX_STS_CRC_ERR 0x00000002 +#define RX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x44) +#define TX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x48) +#define TX_STS_TAG 0xFFFF0000 +#define TX_STS_ES 0x00008000 +#define TX_STS_LOC 0x00000800 +#define TX_STS_NO_CARR 0x00000400 +#define TX_STS_LATE_COLL 0x00000200 +#define TX_STS_MANY_COLL 0x00000100 +#define TX_STS_COLL_CNT 0x00000078 +#define TX_STS_MANY_DEFER 0x00000004 +#define TX_STS_UNDERRUN 0x00000002 +#define TX_STS_DEFERRED 0x00000001 +#define TX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x4C) +#define ID_REV (CONFIG_DRIVER_SMC911X_BASE + 0x50) +#define ID_REV_CHIP_ID 0xFFFF0000 /* RO */ +#define ID_REV_REV_ID 0x0000FFFF /* RO */ + +#define INT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x54) +#define INT_CFG_INT_DEAS 0xFF000000 /* R/W */ +#define INT_CFG_INT_DEAS_CLR 0x00004000 +#define INT_CFG_INT_DEAS_STS 0x00002000 +#define INT_CFG_IRQ_INT 0x00001000 /* RO */ +#define INT_CFG_IRQ_EN 0x00000100 /* R/W */ +#define INT_CFG_IRQ_POL 0x00000010 /* R/W Not Affected by SW Reset */ +#define INT_CFG_IRQ_TYPE 0x00000001 /* R/W Not Affected by SW Reset */ + +#define INT_STS (CONFIG_DRIVER_SMC911X_BASE + 0x58) +#define INT_STS_SW_INT 0x80000000 /* R/WC */ +#define INT_STS_TXSTOP_INT 0x02000000 /* R/WC */ +#define INT_STS_RXSTOP_INT 0x01000000 /* R/WC */ +#define INT_STS_RXDFH_INT 0x00800000 /* R/WC */ +#define INT_STS_RXDF_INT 0x00400000 /* R/WC */ +#define INT_STS_TX_IOC 0x00200000 /* R/WC */ +#define INT_STS_RXD_INT 0x00100000 /* R/WC */ +#define INT_STS_GPT_INT 0x00080000 /* R/WC */ +#define INT_STS_PHY_INT 0x00040000 /* RO */ +#define INT_STS_PME_INT 0x00020000 /* R/WC */ +#define INT_STS_TXSO 0x00010000 /* R/WC */ +#define INT_STS_RWT 0x00008000 /* R/WC */ +#define INT_STS_RXE 0x00004000 /* R/WC */ +#define INT_STS_TXE 0x00002000 /* R/WC */ +/*#define INT_STS_ERX 0x00001000*/ /* R/WC */ +#define INT_STS_TDFU 0x00000800 /* R/WC */ +#define INT_STS_TDFO 0x00000400 /* R/WC */ +#define INT_STS_TDFA 0x00000200 /* R/WC */ +#define INT_STS_TSFF 0x00000100 /* R/WC */ +#define INT_STS_TSFL 0x00000080 /* R/WC */ +/*#define INT_STS_RXDF 0x00000040*/ /* R/WC */ +#define INT_STS_RDFO 0x00000040 /* R/WC */ +#define INT_STS_RDFL 0x00000020 /* R/WC */ +#define INT_STS_RSFF 0x00000010 /* R/WC */ +#define INT_STS_RSFL 0x00000008 /* R/WC */ +#define INT_STS_GPIO2_INT 0x00000004 /* R/WC */ +#define INT_STS_GPIO1_INT 0x00000002 /* R/WC */ +#define INT_STS_GPIO0_INT 0x00000001 /* R/WC */ +#define INT_EN (CONFIG_DRIVER_SMC911X_BASE + 0x5C) +#define INT_EN_SW_INT_EN 0x80000000 /* R/W */ +#define INT_EN_TXSTOP_INT_EN 0x02000000 /* R/W */ +#define INT_EN_RXSTOP_INT_EN 0x01000000 /* R/W */ +#define INT_EN_RXDFH_INT_EN 0x00800000 /* R/W */ +/*#define INT_EN_RXDF_INT_EN 0x00400000*/ /* R/W */ +#define INT_EN_TIOC_INT_EN 0x00200000 /* R/W */ +#define INT_EN_RXD_INT_EN 0x00100000 /* R/W */ +#define INT_EN_GPT_INT_EN 0x00080000 /* R/W */ +#define INT_EN_PHY_INT_EN 0x00040000 /* R/W */ +#define INT_EN_PME_INT_EN 0x00020000 /* R/W */ +#define INT_EN_TXSO_EN 0x00010000 /* R/W */ +#define INT_EN_RWT_EN 0x00008000 /* R/W */ +#define INT_EN_RXE_EN 0x00004000 /* R/W */ +#define INT_EN_TXE_EN 0x00002000 /* R/W */ +/*#define INT_EN_ERX_EN 0x00001000*/ /* R/W */ +#define INT_EN_TDFU_EN 0x00000800 /* R/W */ +#define INT_EN_TDFO_EN 0x00000400 /* R/W */ +#define INT_EN_TDFA_EN 0x00000200 /* R/W */ +#define INT_EN_TSFF_EN 0x00000100 /* R/W */ +#define INT_EN_TSFL_EN 0x00000080 /* R/W */ +/*#define INT_EN_RXDF_EN 0x00000040*/ /* R/W */ +#define INT_EN_RDFO_EN 0x00000040 /* R/W */ +#define INT_EN_RDFL_EN 0x00000020 /* R/W */ +#define INT_EN_RSFF_EN 0x00000010 /* R/W */ +#define INT_EN_RSFL_EN 0x00000008 /* R/W */ +#define INT_EN_GPIO2_INT 0x00000004 /* R/W */ +#define INT_EN_GPIO1_INT 0x00000002 /* R/W */ +#define INT_EN_GPIO0_INT 0x00000001 /* R/W */ + +#define BYTE_TEST (CONFIG_DRIVER_SMC911X_BASE + 0x64) +#define FIFO_INT (CONFIG_DRIVER_SMC911X_BASE + 0x68) +#define FIFO_INT_TX_AVAIL_LEVEL 0xFF000000 /* R/W */ +#define FIFO_INT_TX_STS_LEVEL 0x00FF0000 /* R/W */ +#define FIFO_INT_RX_AVAIL_LEVEL 0x0000FF00 /* R/W */ +#define FIFO_INT_RX_STS_LEVEL 0x000000FF /* R/W */ + +#define RX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x6C) +#define RX_CFG_RX_END_ALGN 0xC0000000 /* R/W */ +#define RX_CFG_RX_END_ALGN4 0x00000000 /* R/W */ +#define RX_CFG_RX_END_ALGN16 0x40000000 /* R/W */ +#define RX_CFG_RX_END_ALGN32 0x80000000 /* R/W */ +#define RX_CFG_RX_DMA_CNT 0x0FFF0000 /* R/W */ +#define RX_CFG_RX_DUMP 0x00008000 /* R/W */ +#define RX_CFG_RXDOFF 0x00001F00 /* R/W */ +/*#define RX_CFG_RXBAD 0x00000001*/ /* R/W */ + +#define TX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x70) +/*#define TX_CFG_TX_DMA_LVL 0xE0000000*/ /* R/W */ +/*#define TX_CFG_TX_DMA_CNT 0x0FFF0000*/ /* R/W Self Clearing */ +#define TX_CFG_TXS_DUMP 0x00008000 /* Self Clearing */ +#define TX_CFG_TXD_DUMP 0x00004000 /* Self Clearing */ +#define TX_CFG_TXSAO 0x00000004 /* R/W */ +#define TX_CFG_TX_ON 0x00000002 /* R/W */ +#define TX_CFG_STOP_TX 0x00000001 /* Self Clearing */ + +#define HW_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x74) +#define HW_CFG_TTM 0x00200000 /* R/W */ +#define HW_CFG_SF 0x00100000 /* R/W */ +#define HW_CFG_TX_FIF_SZ 0x000F0000 /* R/W */ +#define HW_CFG_TR 0x00003000 /* R/W */ +#define HW_CFG_PHY_CLK_SEL 0x00000060 /* R/W */ +#define HW_CFG_PHY_CLK_SEL_INT_PHY 0x00000000 /* R/W */ +#define HW_CFG_PHY_CLK_SEL_EXT_PHY 0x00000020 /* R/W */ +#define HW_CFG_PHY_CLK_SEL_CLK_DIS 0x00000040 /* R/W */ +#define HW_CFG_SMI_SEL 0x00000010 /* R/W */ +#define HW_CFG_EXT_PHY_DET 0x00000008 /* RO */ +#define HW_CFG_EXT_PHY_EN 0x00000004 /* R/W */ +#define HW_CFG_32_16_BIT_MODE 0x00000004 /* RO */ +#define HW_CFG_SRST_TO 0x00000002 /* RO */ +#define HW_CFG_SRST 0x00000001 /* Self Clearing */ + +#define RX_DP_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x78) +#define RX_DP_CTRL_RX_FFWD 0x80000000 /* R/W */ +#define RX_DP_CTRL_FFWD_BUSY 0x80000000 /* RO */ + +#define RX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x7C) +#define RX_FIFO_INF_RXSUSED 0x00FF0000 /* RO */ +#define RX_FIFO_INF_RXDUSED 0x0000FFFF /* RO */ + +#define TX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x80) +#define TX_FIFO_INF_TSUSED 0x00FF0000 /* RO */ +#define TX_FIFO_INF_TDFREE 0x0000FFFF /* RO */ + +#define PMT_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x84) +#define PMT_CTRL_PM_MODE 0x00003000 /* Self Clearing */ +#define PMT_CTRL_PHY_RST 0x00000400 /* Self Clearing */ +#define PMT_CTRL_WOL_EN 0x00000200 /* R/W */ +#define PMT_CTRL_ED_EN 0x00000100 /* R/W */ +#define PMT_CTRL_PME_TYPE 0x00000040 /* R/W Not Affected by SW Reset */ +#define PMT_CTRL_WUPS 0x00000030 /* R/WC */ +#define PMT_CTRL_WUPS_NOWAKE 0x00000000 /* R/WC */ +#define PMT_CTRL_WUPS_ED 0x00000010 /* R/WC */ +#define PMT_CTRL_WUPS_WOL 0x00000020 /* R/WC */ +#define PMT_CTRL_WUPS_MULTI 0x00000030 /* R/WC */ +#define PMT_CTRL_PME_IND 0x00000008 /* R/W */ +#define PMT_CTRL_PME_POL 0x00000004 /* R/W */ +#define PMT_CTRL_PME_EN 0x00000002 /* R/W Not Affected by SW Reset */ +#define PMT_CTRL_READY 0x00000001 /* RO */ + +#define GPIO_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x88) +#define GPIO_CFG_LED3_EN 0x40000000 /* R/W */ +#define GPIO_CFG_LED2_EN 0x20000000 /* R/W */ +#define GPIO_CFG_LED1_EN 0x10000000 /* R/W */ +#define GPIO_CFG_GPIO2_INT_POL 0x04000000 /* R/W */ +#define GPIO_CFG_GPIO1_INT_POL 0x02000000 /* R/W */ +#define GPIO_CFG_GPIO0_INT_POL 0x01000000 /* R/W */ +#define GPIO_CFG_EEPR_EN 0x00700000 /* R/W */ +#define GPIO_CFG_GPIOBUF2 0x00040000 /* R/W */ +#define GPIO_CFG_GPIOBUF1 0x00020000 /* R/W */ +#define GPIO_CFG_GPIOBUF0 0x00010000 /* R/W */ +#define GPIO_CFG_GPIODIR2 0x00000400 /* R/W */ +#define GPIO_CFG_GPIODIR1 0x00000200 /* R/W */ +#define GPIO_CFG_GPIODIR0 0x00000100 /* R/W */ +#define GPIO_CFG_GPIOD4 0x00000010 /* R/W */ +#define GPIO_CFG_GPIOD3 0x00000008 /* R/W */ +#define GPIO_CFG_GPIOD2 0x00000004 /* R/W */ +#define GPIO_CFG_GPIOD1 0x00000002 /* R/W */ +#define GPIO_CFG_GPIOD0 0x00000001 /* R/W */ + +#define GPT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x8C) +#define GPT_CFG_TIMER_EN 0x20000000 /* R/W */ +#define GPT_CFG_GPT_LOAD 0x0000FFFF /* R/W */ + +#define GPT_CNT (CONFIG_DRIVER_SMC911X_BASE + 0x90) +#define GPT_CNT_GPT_CNT 0x0000FFFF /* RO */ + +#define ENDIAN (CONFIG_DRIVER_SMC911X_BASE + 0x98) +#define FREE_RUN (CONFIG_DRIVER_SMC911X_BASE + 0x9C) +#define RX_DROP (CONFIG_DRIVER_SMC911X_BASE + 0xA0) +#define MAC_CSR_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xA4) +#define MAC_CSR_CMD_CSR_BUSY 0x80000000 /* Self Clearing */ +#define MAC_CSR_CMD_R_NOT_W 0x40000000 /* R/W */ +#define MAC_CSR_CMD_CSR_ADDR 0x000000FF /* R/W */ + +#define MAC_CSR_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xA8) +#define AFC_CFG (CONFIG_DRIVER_SMC911X_BASE + 0xAC) +#define AFC_CFG_AFC_HI 0x00FF0000 /* R/W */ +#define AFC_CFG_AFC_LO 0x0000FF00 /* R/W */ +#define AFC_CFG_BACK_DUR 0x000000F0 /* R/W */ +#define AFC_CFG_FCMULT 0x00000008 /* R/W */ +#define AFC_CFG_FCBRD 0x00000004 /* R/W */ +#define AFC_CFG_FCADD 0x00000002 /* R/W */ +#define AFC_CFG_FCANY 0x00000001 /* R/W */ + +#define E2P_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xB0) +#define E2P_CMD_EPC_BUSY 0x80000000 /* Self Clearing */ +#define E2P_CMD_EPC_CMD 0x70000000 /* R/W */ +#define E2P_CMD_EPC_CMD_READ 0x00000000 /* R/W */ +#define E2P_CMD_EPC_CMD_EWDS 0x10000000 /* R/W */ +#define E2P_CMD_EPC_CMD_EWEN 0x20000000 /* R/W */ +#define E2P_CMD_EPC_CMD_WRITE 0x30000000 /* R/W */ +#define E2P_CMD_EPC_CMD_WRAL 0x40000000 /* R/W */ +#define E2P_CMD_EPC_CMD_ERASE 0x50000000 /* R/W */ +#define E2P_CMD_EPC_CMD_ERAL 0x60000000 /* R/W */ +#define E2P_CMD_EPC_CMD_RELOAD 0x70000000 /* R/W */ +#define E2P_CMD_EPC_TIMEOUT 0x00000200 /* RO */ +#define E2P_CMD_MAC_ADDR_LOADED 0x00000100 /* RO */ +#define E2P_CMD_EPC_ADDR 0x000000FF /* R/W */ + +#define E2P_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xB4) +#define E2P_DATA_EEPROM_DATA 0x000000FF /* R/W */ /* end of LAN register offsets and bit definitions */ /* MAC Control and Status registers */ -#define MAC_CR (0x01) /* R/W */ +#define MAC_CR 0x01 /* R/W */ /* MAC_CR - MAC Control Register */ -#define MAC_CR_RXALL (0x80000000) +#define MAC_CR_RXALL 0x80000000 /* TODO: delete this bit? It is not described in the data sheet. */ -#define MAC_CR_HBDIS (0x10000000) -#define MAC_CR_RCVOWN (0x00800000) -#define MAC_CR_LOOPBK (0x00200000) -#define MAC_CR_FDPX (0x00100000) -#define MAC_CR_MCPAS (0x00080000) -#define MAC_CR_PRMS (0x00040000) -#define MAC_CR_INVFILT (0x00020000) -#define MAC_CR_PASSBAD (0x00010000) -#define MAC_CR_HFILT (0x00008000) -#define MAC_CR_HPFILT (0x00002000) -#define MAC_CR_LCOLL (0x00001000) -#define MAC_CR_BCAST (0x00000800) -#define MAC_CR_DISRTY (0x00000400) -#define MAC_CR_PADSTR (0x00000100) -#define MAC_CR_BOLMT_MASK (0x000000C0) -#define MAC_CR_DFCHK (0x00000020) -#define MAC_CR_TXEN (0x00000008) -#define MAC_CR_RXEN (0x00000004) - -#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */ -#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */ -#define HASHH (0x04) /* R/W */ -#define HASHL (0x05) /* R/W */ - -#define MII_ACC (0x06) /* R/W */ -#define MII_ACC_PHY_ADDR (0x0000F800) -#define MII_ACC_MIIRINDA (0x000007C0) -#define MII_ACC_MII_WRITE (0x00000002) -#define MII_ACC_MII_BUSY (0x00000001) - -#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */ - -#define FLOW (0x08) /* R/W */ -#define FLOW_FCPT (0xFFFF0000) -#define FLOW_FCPASS (0x00000004) -#define FLOW_FCEN (0x00000002) -#define FLOW_FCBSY (0x00000001) - -#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */ -#define VLAN1_VTI1 (0x0000ffff) - -#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */ -#define VLAN2_VTI2 (0x0000ffff) - -#define WUFF (0x0B) /* WO */ - -#define WUCSR (0x0C) /* R/W */ -#define WUCSR_GUE (0x00000200) -#define WUCSR_WUFR (0x00000040) -#define WUCSR_MPR (0x00000020) -#define WUCSR_WAKE_EN (0x00000004) -#define WUCSR_MPEN (0x00000002) +#define MAC_CR_HBDIS 0x10000000 +#define MAC_CR_RCVOWN 0x00800000 +#define MAC_CR_LOOPBK 0x00200000 +#define MAC_CR_FDPX 0x00100000 +#define MAC_CR_MCPAS 0x00080000 +#define MAC_CR_PRMS 0x00040000 +#define MAC_CR_INVFILT 0x00020000 +#define MAC_CR_PASSBAD 0x00010000 +#define MAC_CR_HFILT 0x00008000 +#define MAC_CR_HPFILT 0x00002000 +#define MAC_CR_LCOLL 0x00001000 +#define MAC_CR_BCAST 0x00000800 +#define MAC_CR_DISRTY 0x00000400 +#define MAC_CR_PADSTR 0x00000100 +#define MAC_CR_BOLMT_MASK 0x000000C0 +#define MAC_CR_DFCHK 0x00000020 +#define MAC_CR_TXEN 0x00000008 +#define MAC_CR_RXEN 0x00000004 + +#define ADDRH 0x02 /* R/W mask 0x0000FFFFUL */ +#define ADDRL 0x03 /* R/W mask 0xFFFFFFFFUL */ +#define HASHH 0x04 /* R/W */ +#define HASHL 0x05 /* R/W */ + +#define MII_ACC 0x06 /* R/W */ +#define MII_ACC_PHY_ADDR 0x0000F800 +#define MII_ACC_MIIRINDA 0x000007C0 +#define MII_ACC_MII_WRITE 0x00000002 +#define MII_ACC_MII_BUSY 0x00000001 + +#define MII_DATA 0x07 /* R/W mask 0x0000FFFFUL */ + +#define FLOW 0x08 /* R/W */ +#define FLOW_FCPT 0xFFFF0000 +#define FLOW_FCPASS 0x00000004 +#define FLOW_FCEN 0x00000002 +#define FLOW_FCBSY 0x00000001 + +#define VLAN1 0x09 /* R/W mask 0x0000FFFFUL */ +#define VLAN1_VTI1 0x0000ffff + +#define VLAN2 0x0A /* R/W mask 0x0000FFFFUL */ +#define VLAN2_VTI2 0x0000ffff + +#define WUFF 0x0B /* WO */ + +#define WUCSR 0x0C /* R/W */ +#define WUCSR_GUE 0x00000200 +#define WUCSR_WUFR 0x00000040 +#define WUCSR_MPR 0x00000020 +#define WUCSR_WAKE_EN 0x00000004 +#define WUCSR_MPEN 0x00000002 /* Chip ID values */ #define CHIP_9115 0x115 @@ -377,19 +388,23 @@ static const struct chip_id chip_ids[] = { u32 smc911x_get_mac_csr(u8 reg) { - while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); - MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg; - while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + ; + reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg); + while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + ; - return MAC_CSR_DATA; + return reg_read(MAC_CSR_DATA); } void smc911x_set_mac_csr(u8 reg, u32 data) { - while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); - MAC_CSR_DATA = data; - MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg; - while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY); + while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + ; + reg_write(MAC_CSR_DATA, data); + reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg); + while (reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY) + ; } static int smx911x_handle_mac_address(bd_t *bd) @@ -431,11 +446,13 @@ static int smx911x_handle_mac_address(bd_t *bd) static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val) { - while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY) + ; - smc911x_set_mac_csr( MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY); + smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY); - while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY) + ; *val = smc911x_get_mac_csr(MII_DATA); @@ -444,13 +461,15 @@ static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val) static int smc911x_miiphy_write(u8 phy, u8 reg, u16 val) { - while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY) + ; smc911x_set_mac_csr(MII_DATA, val); smc911x_set_mac_csr(MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE); - while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY); + while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY) + ; return 0; } @@ -458,10 +477,10 @@ static int smc911x_phy_reset(void) { u32 reg; - reg = PMT_CTRL; + reg = reg_read(PMT_CTRL); reg &= ~0xfffff030; reg |= PMT_CTRL_PHY_RST; - PMT_CTRL = reg; + reg_write(PMT_CTRL, reg); mdelay(100); @@ -503,13 +522,13 @@ static void smc911x_reset(void) int timeout; /* Take out of PM setting first */ - if (PMT_CTRL & PMT_CTRL_READY) { + if (reg_read(PMT_CTRL) & PMT_CTRL_READY) { /* Write to the bytetest will take out of powerdown */ - BYTE_TEST = 0x0; + reg_write(BYTE_TEST, 0x0); timeout = 10; - while ( timeout-- && !(PMT_CTRL & PMT_CTRL_READY)) + while (timeout-- && !(reg_read(PMT_CTRL) & PMT_CTRL_READY)) udelay(10); if (!timeout) { printf(DRIVERNAME @@ -519,38 +538,38 @@ static void smc911x_reset(void) } /* Disable interrupts */ - INT_EN = 0; + reg_write(INT_EN, 0); - HW_CFG = HW_CFG_SRST; + reg_write(HW_CFG, HW_CFG_SRST); timeout = 1000; - while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY) + while (timeout-- && reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY) udelay(10); - if(!timeout) { + if (!timeout) { printf(DRIVERNAME ": reset timeout\n"); return; } /* Reset the FIFO level and flow control settings */ smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN); - AFC_CFG = 0x0050287F; + reg_write(AFC_CFG, 0x0050287F); /* Set to LED outputs */ - GPIO_CFG = 0x70070000; + reg_write(GPIO_CFG, 0x70070000); } static void smc911x_enable(void) { /* Enable TX */ - HW_CFG = 8 << 16 | HW_CFG_SF; + reg_write(HW_CFG, 8 << 16 | HW_CFG_SF); - GPT_CFG = GPT_CFG_TIMER_EN | 10000; + reg_write(GPT_CFG, GPT_CFG_TIMER_EN | 10000); - TX_CFG = TX_CFG_TX_ON; + reg_write(TX_CFG, TX_CFG_TX_ON); /* no padding to start of packets */ - RX_CFG = 0; + reg_write(RX_CFG, 0); smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS); @@ -562,14 +581,14 @@ int eth_init(bd_t *bd) printf(DRIVERNAME ": initializing\n"); - val = BYTE_TEST; - if(val != 0x87654321) { + val = reg_read(BYTE_TEST); + if (val != 0x87654321) { printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val); goto err_out; } - val = ID_REV >> 16; - for(i = 0; chip_ids[i].id != 0; i++) { + val = reg_read(ID_REV) >> 16; + for (i = 0; chip_ids[i].id != 0; i++) { if (chip_ids[i].id == val) break; } if (!chip_ids[i].id) { @@ -602,24 +621,24 @@ int eth_send(volatile void *packet, int length) u32 tmplen; u32 status; - TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length; - TX_DATA_FIFO = length; + reg_write(TX_DATA_FIFO, TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length); + reg_write(TX_DATA_FIFO, length); tmplen = (length + 3) / 4; - while(tmplen--) - TX_DATA_FIFO = *data++; + while (tmplen--) + reg_write(TX_DATA_FIFO, *data++); /* wait for transmission */ - while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16)); + while (!((reg_read(TX_FIFO_INF) & TX_FIFO_INF_TSUSED) >> 16)); /* get status. Ignore 'no carrier' error, it has no meaning for * full duplex operation */ - status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL | + status = reg_read(TX_STATUS_FIFO) & (TX_STS_LOC | TX_STS_LATE_COLL | TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN); - if(!status) + if (!status) return 0; printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n", @@ -643,17 +662,17 @@ int eth_rx(void) u32 pktlen, tmplen; u32 status; - if((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) { - status = RX_STATUS_FIFO; + if ((reg_read(RX_FIFO_INF) & RX_FIFO_INF_RXSUSED) >> 16) { + status = reg_read(RX_STATUS_FIFO); pktlen = (status & RX_STS_PKT_LEN) >> 16; - RX_CFG = 0; + reg_write(RX_CFG, 0); tmplen = (pktlen + 2+ 3) / 4; - while(tmplen--) - *data++ = RX_DATA_FIFO; + while (tmplen--) + *data++ = reg_read(RX_DATA_FIFO); - if(status & RX_STS_ES) + if (status & RX_STS_ES) printf(DRIVERNAME ": dropped bad packet. Status: 0x%08x\n", status); diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 2a6f59a698..d82f554391 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -92,6 +92,7 @@ #define CONFIG_DRIVER_SMC911X 1 #define CONFIG_DRIVER_SMC911X_BASE 0xb4020000 +#define CONFIG_DRIVER_SMC911X_32_BIT 1 /* * Miscellaneous configurable options diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index e067b7612a..7e9bfb504e 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -108,6 +108,7 @@ #define CONFIG_DRIVER_SMC911X 1 #define CONFIG_DRIVER_SMC911X_BASE 0xa8000000 +#define CONFIG_DRIVER_SMC911X_32_BIT 1 /* * Miscellaneous configurable options -- 2.30.2