From 3dd3c61c30bde9647dfb8c9a487bcf73d340f3fd Mon Sep 17 00:00:00 2001 From: Mieczyslaw Nalewaj Date: Tue, 17 Sep 2024 21:59:28 +0200 Subject: [PATCH] realtek: drop 5.15 support Drop config and files for Linux 5.15. Signed-off-by: Mieczyslaw Nalewaj Link: https://github.com/openwrt/openwrt/pull/16417 Signed-off-by: Robert Marko --- .../bindings/realtek,otto-timer.yaml | 85 - .../mips/include/asm/mach-rtl838x/ioremap.h | 29 - .../include/asm/mach-rtl838x/mach-rtl83xx.h | 415 -- .../files-5.15/arch/mips/rtl838x/Makefile | 5 - .../files-5.15/arch/mips/rtl838x/Platform | 5 - .../files-5.15/arch/mips/rtl838x/prom.c | 212 - .../files-5.15/arch/mips/rtl838x/setup.c | 102 - .../files-5.15/drivers/clk/realtek/Kconfig | 19 - .../files-5.15/drivers/clk/realtek/Makefile | 2 - .../drivers/clk/realtek/clk-rtl838x-sram.S | 149 - .../drivers/clk/realtek/clk-rtl839x-sram.S | 141 - .../drivers/clk/realtek/clk-rtl83xx.c | 770 ---- .../drivers/clk/realtek/clk-rtl83xx.h | 75 - .../drivers/clocksource/timer-rtl-otto.c | 286 -- .../files-5.15/drivers/gpio/gpio-rtl8231.c | 364 -- .../drivers/i2c/busses/i2c-rtl9300.c | 486 -- .../drivers/i2c/busses/i2c-rtl9300.h | 62 - .../drivers/i2c/muxes/i2c-mux-rtl9300.c | 293 -- .../drivers/net/dsa/rtl83xx/Kconfig | 7 - .../drivers/net/dsa/rtl83xx/Makefile | 3 - .../drivers/net/dsa/rtl83xx/common.c | 1714 ------- .../drivers/net/dsa/rtl83xx/debugfs.c | 719 --- .../files-5.15/drivers/net/dsa/rtl83xx/dsa.c | 2237 --------- .../files-5.15/drivers/net/dsa/rtl83xx/qos.c | 565 --- .../drivers/net/dsa/rtl83xx/rtl838x.c | 2036 --------- .../drivers/net/dsa/rtl83xx/rtl838x.h | 1103 ----- .../drivers/net/dsa/rtl83xx/rtl839x.c | 1911 -------- .../drivers/net/dsa/rtl83xx/rtl83xx.h | 136 - .../drivers/net/dsa/rtl83xx/rtl930x.c | 2568 ----------- .../drivers/net/dsa/rtl83xx/rtl931x.c | 1694 ------- .../files-5.15/drivers/net/dsa/rtl83xx/tc.c | 410 -- .../drivers/net/ethernet/rtl838x_eth.c | 2733 ----------- .../drivers/net/ethernet/rtl838x_eth.h | 470 -- .../files-5.15/drivers/net/phy/rtl83xx-phy.c | 4001 ----------------- .../files-5.15/drivers/net/phy/rtl83xx-phy.h | 64 - .../include/dt-bindings/clock/rtl83xx-clk.h | 15 - ...hdog-add-realtek-otto-watchdog-timer.patch | 467 -- ...pers-to-extract-clause-45-regad-and-.patch | 53 - ...k-otto-Support-reversed-port-layouts.patch | 123 - ...ltek-otto-Support-per-cpu-interrupts.patch | 153 - ...pio-realtek-otto-Add-RTL930x-support.patch | 29 - ...pio-realtek-otto-Add-RTL931x-support.patch | 30 - .../300-mips-add-rtl838x-platform.patch | 86 - .../301-gpio-add-rtl8231-driver.patch | 50 - .../302-clocksource-add-otto-driver.patch | 93 - ...e-dependencies-for-gpio-realtek-otto.patch | 26 - ...pdate-dependency-for-spi-realtek-rtl.patch | 25 - ...pdate-dependency-for-irq-realtek-rtl.patch | 25 - ...date-dependency-for-realtek-otto-wdt.patch | 32 - ...308-otto-wdt-fix-missing-math-header.patch | 28 - .../310-add-i2c-rtl9300-support.patch | 46 - .../311-add-i2c-mux-rtl9300-support.patch | 46 - ...chip-irq-realtek-rtl-add-VPE-support.patch | 402 -- .../316-otto-gpio-uniprocessor-irq-mask.patch | 51 - ...io-realtek-otto-switch-to-32-bit-I-O.patch | 368 -- .../318-add-rtl83xx-clk-support.patch | 33 - ...hip-irq-realtek-rtl-fix-VPE-affinity.patch | 159 - ...t-dsa-add-support-for-rtl838x-switch.patch | 42 - ...-add-rtl838x-support-for-tag-trailer.patch | 61 - ...a-increase-dsa-max-ports-for-rtl838x.patch | 32 - ...net-add-support-for-rtl838x-ethernet.patch | 48 - ...nclude-linux-add-phy-ops-for-rtl838x.patch | 34 - ...vers-net-phy-eee-support-for-rtl838x.patch | 61 - ...04-include-linux-add-phy-hsgmii-mode.patch | 62 - .../patches-5.15/705-add-rtl-phy.patch | 39 - ...rease-phy-address-number-for-rtl839x.patch | 32 - ...sfp-re-probe-modules-on-DEV_UP-event.patch | 26 - ...11-net-phy-add-an-MDIO-SMBus-library.patch | 148 - ...12-net-phy-sfp-add-support-for-SMBus.patch | 99 - target/linux/realtek/rtl838x/config-5.15 | 224 - target/linux/realtek/rtl839x/config-5.15 | 244 - target/linux/realtek/rtl930x/config-5.15 | 205 - target/linux/realtek/rtl931x/config-5.15 | 241 - 73 files changed, 29809 deletions(-) delete mode 100644 target/linux/realtek/files-5.15/Documentation/devicetree/bindings/realtek,otto-timer.yaml delete mode 100644 target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/ioremap.h delete mode 100644 target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h delete mode 100644 target/linux/realtek/files-5.15/arch/mips/rtl838x/Makefile delete mode 100644 target/linux/realtek/files-5.15/arch/mips/rtl838x/Platform delete mode 100644 target/linux/realtek/files-5.15/arch/mips/rtl838x/prom.c delete mode 100644 target/linux/realtek/files-5.15/arch/mips/rtl838x/setup.c delete mode 100644 target/linux/realtek/files-5.15/drivers/clk/realtek/Kconfig delete mode 100644 target/linux/realtek/files-5.15/drivers/clk/realtek/Makefile delete mode 100644 target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl838x-sram.S delete mode 100644 target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl839x-sram.S delete mode 100644 target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.c delete mode 100644 target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.h delete mode 100644 target/linux/realtek/files-5.15/drivers/clocksource/timer-rtl-otto.c delete mode 100644 target/linux/realtek/files-5.15/drivers/gpio/gpio-rtl8231.c delete mode 100644 target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c delete mode 100644 target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.h delete mode 100644 target/linux/realtek/files-5.15/drivers/i2c/muxes/i2c-mux-rtl9300.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Kconfig delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Makefile delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/debugfs.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/qos.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl83xx.h delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/tc.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.h delete mode 100644 target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c delete mode 100644 target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h delete mode 100644 target/linux/realtek/files-5.15/include/dt-bindings/clock/rtl83xx-clk.h delete mode 100644 target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch delete mode 100644 target/linux/realtek/patches-5.15/020-v5.17-net-mdio-add-helpers-to-extract-clause-45-regad-and-.patch delete mode 100644 target/linux/realtek/patches-5.15/021-v5.19-02-gpio-realtek-otto-Support-reversed-port-layouts.patch delete mode 100644 target/linux/realtek/patches-5.15/021-v5.19-03-gpio-realtek-otto-Support-per-cpu-interrupts.patch delete mode 100644 target/linux/realtek/patches-5.15/021-v5.19-04-gpio-realtek-otto-Add-RTL930x-support.patch delete mode 100644 target/linux/realtek/patches-5.15/021-v5.19-06-gpio-realtek-otto-Add-RTL931x-support.patch delete mode 100644 target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch delete mode 100644 target/linux/realtek/patches-5.15/301-gpio-add-rtl8231-driver.patch delete mode 100644 target/linux/realtek/patches-5.15/302-clocksource-add-otto-driver.patch delete mode 100644 target/linux/realtek/patches-5.15/303-gpio-update-dependencies-for-gpio-realtek-otto.patch delete mode 100644 target/linux/realtek/patches-5.15/304-spi-update-dependency-for-spi-realtek-rtl.patch delete mode 100644 target/linux/realtek/patches-5.15/305-irqchip-update-dependency-for-irq-realtek-rtl.patch delete mode 100644 target/linux/realtek/patches-5.15/307-wdt-update-dependency-for-realtek-otto-wdt.patch delete mode 100644 target/linux/realtek/patches-5.15/308-otto-wdt-fix-missing-math-header.patch delete mode 100644 target/linux/realtek/patches-5.15/310-add-i2c-rtl9300-support.patch delete mode 100644 target/linux/realtek/patches-5.15/311-add-i2c-mux-rtl9300-support.patch delete mode 100644 target/linux/realtek/patches-5.15/315-irqchip-irq-realtek-rtl-add-VPE-support.patch delete mode 100644 target/linux/realtek/patches-5.15/316-otto-gpio-uniprocessor-irq-mask.patch delete mode 100644 target/linux/realtek/patches-5.15/317-gpio-realtek-otto-switch-to-32-bit-I-O.patch delete mode 100644 target/linux/realtek/patches-5.15/318-add-rtl83xx-clk-support.patch delete mode 100644 target/linux/realtek/patches-5.15/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch delete mode 100644 target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch delete mode 100644 target/linux/realtek/patches-5.15/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch delete mode 100644 target/linux/realtek/patches-5.15/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch delete mode 100644 target/linux/realtek/patches-5.15/702-net-ethernet-add-support-for-rtl838x-ethernet.patch delete mode 100644 target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch delete mode 100644 target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch delete mode 100644 target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch delete mode 100644 target/linux/realtek/patches-5.15/705-add-rtl-phy.patch delete mode 100644 target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch delete mode 100644 target/linux/realtek/patches-5.15/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch delete mode 100644 target/linux/realtek/patches-5.15/711-net-phy-add-an-MDIO-SMBus-library.patch delete mode 100644 target/linux/realtek/patches-5.15/712-net-phy-sfp-add-support-for-SMBus.patch delete mode 100644 target/linux/realtek/rtl838x/config-5.15 delete mode 100644 target/linux/realtek/rtl839x/config-5.15 delete mode 100644 target/linux/realtek/rtl930x/config-5.15 delete mode 100644 target/linux/realtek/rtl931x/config-5.15 diff --git a/target/linux/realtek/files-5.15/Documentation/devicetree/bindings/realtek,otto-timer.yaml b/target/linux/realtek/files-5.15/Documentation/devicetree/bindings/realtek,otto-timer.yaml deleted file mode 100644 index 40e834e377..0000000000 --- a/target/linux/realtek/files-5.15/Documentation/devicetree/bindings/realtek,otto-timer.yaml +++ /dev/null @@ -1,85 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/timer/realtek,rtl8300-timer.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Realtek Timer Device Tree Bindings - -maintainers: - - Markus Stockhausen - -description: | - The Realtek SOCs of the RTL83XX and RTL93XX series have at least 5 known - timers with corresponding interrupt lines . Their speed is derived from the - Lexra Bus (LXB) by dividers. Each timer has a block of 4 control registers in - the address range 0xb800xxxx with following start offsets. - - RTL83XX: 0x3100, 0x3110, 0x3120, 0x3130, 0x3140 - RTL93XX: 0x3200, 0x3210, 0x3220, 0x3230, 0x3240 - -properties: - compatible: - items: - - enum: - - realtek,rtl8380-timer - - realtek,rtl8390-timer - - realtek,rtl9300-timer - - const: realtek,otto-timer - - reg: - minItems: 5 - maxItems: 5 - description: - List of timer register addresses. - - interrupts: - minItems: 5 - maxItems: 5 - description: - List of timer interrupts. - - clocks: - maxItems: 1 - -required: - - compatible - - reg - - interrupts - - clocks - -additionalProperties: false - -examples: - - | - timer0: timer@3100 { - compatible = "realtek,rtl8380-timer", "realtek,otto-timer"; - reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>, - <0x3130 0x10>, <0x3140 0x10>; - - interrupt-parent = <&intc>; - interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>; - clocks = <&ccu CLK_LXB>; - }; - - | - timer0: timer@3100 { - compatible = "realtek,rtl8390-timer", "realtek,otto-timer"; - reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>, - <0x3130 0x10>, <0x3140 0x10>; - - interrupt-parent = <&intc>; - interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>; - clocks = <&ccu CLK_LXB>; - }; - - | - timer0: timer@3200 { - compatible = "realtek,rtl9300-timer", "realtek,otto-timer"; - reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>, - <0x3230 0x10>, <0x3240 0x10>; - - interrupt-parent = <&intc>; - interrupts = <7 4>, <8 4>, <9 4>, <10 4>, <11 4>; - clocks = <&ccu CLK_LXB>; - }; - -... diff --git a/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/ioremap.h b/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/ioremap.h deleted file mode 100644 index c49a095792..0000000000 --- a/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/ioremap.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -#ifndef RTL838X_IOREMAP_H_ -#define RTL838X_IOREMAP_H_ - -static inline int is_rtl838x_internal_registers(phys_addr_t offset) -{ - /* IO-Block */ - if (offset >= 0xb8000000 && offset < 0xb9000000) - return 1; - /* Switch block */ - if (offset >= 0xbb000000 && offset < 0xbc000000) - return 1; - return 0; -} - -static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size, - unsigned long flags) -{ - if (is_rtl838x_internal_registers(offset)) - return (void __iomem *)offset; - return NULL; -} - -static inline int plat_iounmap(const volatile void __iomem *addr) -{ - return is_rtl838x_internal_registers((unsigned long)addr); -} - -#endif diff --git a/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h b/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h deleted file mode 100644 index 8ea580f3d1..0000000000 --- a/target/linux/realtek/files-5.15/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h +++ /dev/null @@ -1,415 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2006-2012 Tony Wu (tonywu@realtek.com) - * Copyright (C) 2020 B. Koblitz - */ -#ifndef _MACH_RTL838X_H_ -#define _MACH_RTL838X_H_ - -#include -/* - * Register access macros - */ - -#define RTL838X_SW_BASE ((volatile void *) 0xBB000000) - -#define rtl83xx_r32(reg) readl(reg) -#define rtl83xx_w32(val, reg) writel(val, reg) -#define rtl83xx_w32_mask(clear, set, reg) rtl83xx_w32((rtl83xx_r32(reg) & ~(clear)) | (set), reg) - -#define rtl83xx_r8(reg) readb(reg) -#define rtl83xx_w8(val, reg) writeb(val, reg) - -#define sw_r32(reg) readl(RTL838X_SW_BASE + reg) -#define sw_w32(val, reg) writel(val, RTL838X_SW_BASE + reg) -#define sw_w32_mask(clear, set, reg) \ - sw_w32((sw_r32(reg) & ~(clear)) | (set), reg) -#define sw_r64(reg) ((((u64)readl(RTL838X_SW_BASE + reg)) << 32) | \ - readl(RTL838X_SW_BASE + reg + 4)) - -#define sw_w64(val, reg) do { \ - writel((u32)((val) >> 32), RTL838X_SW_BASE + reg); \ - writel((u32)((val) & 0xffffffff), \ - RTL838X_SW_BASE + reg + 4); \ - } while (0) - -/* - * SPRAM - */ -#define RTL838X_ISPRAM_BASE 0x0 -#define RTL838X_DSPRAM_BASE 0x0 - -/* - * IRQ Controller - */ -#define RTL838X_IRQ_CPU_BASE 0 -#define RTL838X_IRQ_CPU_NUM 8 -#define RTL838X_IRQ_ICTL_BASE (RTL838X_IRQ_CPU_BASE + RTL838X_IRQ_CPU_NUM) -#define RTL838X_IRQ_ICTL_NUM 32 - -#define RTL83XX_IRQ_UART0 31 -#define RTL83XX_IRQ_UART1 30 -#define RTL83XX_IRQ_TC0 29 -#define RTL83XX_IRQ_TC1 28 -#define RTL83XX_IRQ_OCPTO 27 -#define RTL83XX_IRQ_HLXTO 26 -#define RTL83XX_IRQ_SLXTO 25 -#define RTL83XX_IRQ_NIC 24 -#define RTL83XX_IRQ_GPIO_ABCD 23 -#define RTL83XX_IRQ_GPIO_EFGH 22 -#define RTL83XX_IRQ_RTC 21 -#define RTL83XX_IRQ_SWCORE 20 -#define RTL83XX_IRQ_WDT_IP1 19 -#define RTL83XX_IRQ_WDT_IP2 18 - -#define RTL9300_UART1_IRQ 31 -#define RTL9300_UART0_IRQ 30 -#define RTL9300_USB_H2_IRQ 28 -#define RTL9300_NIC_IRQ 24 -#define RTL9300_SWCORE_IRQ 23 -#define RTL9300_GPIO_ABC_IRQ 13 -#define RTL9300_TC4_IRQ 11 -#define RTL9300_TC3_IRQ 10 -#define RTL9300_TC2_IRQ 9 -#define RTL9300_TC1_IRQ 8 -#define RTL9300_TC0_IRQ 7 - - -/* - * MIPS32R2 counter - */ -#define RTL838X_COMPARE_IRQ (RTL838X_IRQ_CPU_BASE + 7) - -/* - * ICTL - * Base address 0xb8003000UL - */ -#define RTL838X_ICTL1_IRQ (RTL838X_IRQ_CPU_BASE + 2) -#define RTL838X_ICTL2_IRQ (RTL838X_IRQ_CPU_BASE + 3) -#define RTL838X_ICTL3_IRQ (RTL838X_IRQ_CPU_BASE + 4) -#define RTL838X_ICTL4_IRQ (RTL838X_IRQ_CPU_BASE + 5) -#define RTL838X_ICTL5_IRQ (RTL838X_IRQ_CPU_BASE + 6) - -#define GIMR (0x00) -#define UART0_IE (1 << 31) -#define UART1_IE (1 << 30) -#define TC0_IE (1 << 29) -#define TC1_IE (1 << 28) -#define OCPTO_IE (1 << 27) -#define HLXTO_IE (1 << 26) -#define SLXTO_IE (1 << 25) -#define NIC_IE (1 << 24) -#define GPIO_ABCD_IE (1 << 23) -#define GPIO_EFGH_IE (1 << 22) -#define RTC_IE (1 << 21) -#define WDT_IP1_IE (1 << 19) -#define WDT_IP2_IE (1 << 18) - -#define GISR (0x04) -#define UART0_IP (1 << 31) -#define UART1_IP (1 << 30) -#define TC0_IP (1 << 29) -#define TC1_IP (1 << 28) -#define OCPTO_IP (1 << 27) -#define HLXTO_IP (1 << 26) -#define SLXTO_IP (1 << 25) -#define NIC_IP (1 << 24) -#define GPIO_ABCD_IP (1 << 23) -#define GPIO_EFGH_IP (1 << 22) -#define RTC_IP (1 << 21) -#define WDT_IP1_IP (1 << 19) -#define WDT_IP2_IP (1 << 18) - - -/* Interrupt Routing Selection */ -#define UART0_RS 2 -#define UART1_RS 1 -#define TC0_RS 5 -#define TC1_RS 1 -#define OCPTO_RS 1 -#define HLXTO_RS 1 -#define SLXTO_RS 1 -#define NIC_RS 4 -#define GPIO_ABCD_RS 4 -#define GPIO_EFGH_RS 4 -#define RTC_RS 4 -#define SWCORE_RS 3 -#define WDT_IP1_RS 4 -#define WDT_IP2_RS 5 - -/* Interrupt IRQ Assignments */ -#define UART0_IRQ 31 -#define UART1_IRQ 30 -#define TC0_IRQ 29 -#define TC1_IRQ 28 -#define OCPTO_IRQ 27 -#define HLXTO_IRQ 26 -#define SLXTO_IRQ 25 -#define NIC_IRQ 24 -#define GPIO_ABCD_IRQ 23 -#define GPIO_EFGH_IRQ 22 -#define RTC_IRQ 21 -#define SWCORE_IRQ 20 -#define WDT_IP1_IRQ 19 -#define WDT_IP2_IRQ 18 - -#define SYSTEM_FREQ 200000000 -#define RTL838X_UART0_BASE ((volatile void *)(0xb8002000UL)) -#define RTL838X_UART0_BAUD 38400 /* ex. 19200 or 38400 or 57600 or 115200 */ -#define RTL838X_UART0_FREQ (SYSTEM_FREQ - RTL838X_UART0_BAUD * 24) -#define RTL838X_UART0_MAPBASE 0x18002000UL -#define RTL838X_UART0_MAPSIZE 0x100 -#define RTL838X_UART0_IRQ UART0_IRQ - -#define RTL838X_UART1_BASE ((volatile void *)(0xb8002100UL)) -#define RTL838X_UART1_BAUD 38400 /* ex. 19200 or 38400 or 57600 or 115200 */ -#define RTL838X_UART1_FREQ (SYSTEM_FREQ - RTL838X_UART1_BAUD * 24) -#define RTL838X_UART1_MAPBASE 0x18002100UL -#define RTL838X_UART1_MAPSIZE 0x100 -#define RTL838X_UART1_IRQ UART1_IRQ - -#define UART0_RBR (RTL838X_UART0_BASE + 0x000) -#define UART0_THR (RTL838X_UART0_BASE + 0x000) -#define UART0_DLL (RTL838X_UART0_BASE + 0x000) -#define UART0_IER (RTL838X_UART0_BASE + 0x004) -#define UART0_DLM (RTL838X_UART0_BASE + 0x004) -#define UART0_IIR (RTL838X_UART0_BASE + 0x008) -#define UART0_FCR (RTL838X_UART0_BASE + 0x008) -#define UART0_LCR (RTL838X_UART0_BASE + 0x00C) -#define UART0_MCR (RTL838X_UART0_BASE + 0x010) -#define UART0_LSR (RTL838X_UART0_BASE + 0x014) - -#define UART1_RBR (RTL838X_UART1_BASE + 0x000) -#define UART1_THR (RTL838X_UART1_BASE + 0x000) -#define UART1_DLL (RTL838X_UART1_BASE + 0x000) -#define UART1_IER (RTL838X_UART1_BASE + 0x004) -#define UART1_DLM (RTL838X_UART1_BASE + 0x004) -#define UART1_IIR (RTL838X_UART1_BASE + 0x008) -#define UART1_FCR (RTL838X_UART1_BASE + 0x008) -#define UART1_LCR (RTL838X_UART1_BASE + 0x00C) -#define UART1_MCR (RTL838X_UART1_BASE + 0x010) -#define UART1_LSR (RTL838X_UART1_BASE + 0x014) - -/* - * Memory Controller - */ -#define MC_MCR 0xB8001000 -#define MC_MCR_VAL 0x00000000 - -#define MC_DCR 0xB8001004 -#define MC_DCR0_VAL 0x54480000 - -#define MC_DTCR 0xB8001008 -#define MC_DTCR_VAL 0xFFFF05C0 - -/* - * GPIO - */ -#define GPIO_CTRL_REG_BASE ((volatile void *) 0xb8003500) -#define RTL838X_GPIO_PABC_CNR (GPIO_CTRL_REG_BASE + 0x0) -#define RTL838X_GPIO_PABC_TYPE (GPIO_CTRL_REG_BASE + 0x04) -#define RTL838X_GPIO_PABC_DIR (GPIO_CTRL_REG_BASE + 0x8) -#define RTL838X_GPIO_PABC_DATA (GPIO_CTRL_REG_BASE + 0xc) -#define RTL838X_GPIO_PABC_ISR (GPIO_CTRL_REG_BASE + 0x10) -#define RTL838X_GPIO_PAB_IMR (GPIO_CTRL_REG_BASE + 0x14) -#define RTL838X_GPIO_PC_IMR (GPIO_CTRL_REG_BASE + 0x18) - -#define RTL930X_GPIO_CTRL_REG_BASE ((volatile void *) 0xb8003300) -#define RTL930X_GPIO_PABCD_DIR (RTL930X_GPIO_CTRL_REG_BASE + 0x8) -#define RTL930X_GPIO_PABCD_DAT (RTL930X_GPIO_CTRL_REG_BASE + 0xc) -#define RTL930X_GPIO_PABCD_ISR (RTL930X_GPIO_CTRL_REG_BASE + 0x10) -#define RTL930X_GPIO_PAB_IMR (RTL930X_GPIO_CTRL_REG_BASE + 0x14) -#define RTL930X_GPIO_PCD_IMR (RTL930X_GPIO_CTRL_REG_BASE + 0x18) - -#define RTL838X_MODEL_NAME_INFO (0x00D4) -#define RTL839X_MODEL_NAME_INFO (0x0FF0) -#define RTL93XX_MODEL_NAME_INFO (0x0004) -#define RTL931X_CHIP_INFO_ADDR (0x0008) - -#define RTL838X_LED_GLB_CTRL (0xA000) -#define RTL839X_LED_GLB_CTRL (0x00E4) -#define RTL9302_LED_GLB_CTRL (0xcc00) -#define RTL930X_LED_GLB_CTRL (0xCC00) -#define RTL931X_LED_GLB_CTRL (0x0600) - -#define RTL838X_EXT_GPIO_DIR (0xA08C) -#define RTL839X_EXT_GPIO_DIR (0x0214) -#define RTL838X_EXT_GPIO_DATA (0xA094) -#define RTL839X_EXT_GPIO_DATA (0x021c) -#define RTL838X_EXT_GPIO_INDRT_ACCESS (0xA09C) -#define RTL839X_EXT_GPIO_INDRT_ACCESS (0x0224) -#define RTL838X_EXTRA_GPIO_CTRL (0xA0E0) -#define RTL838X_DMY_REG5 (0x0144) -#define RTL838X_EXTRA_GPIO_CTRL (0xA0E0) - -#define RTL838X_GMII_INTF_SEL (0x1000) -#define RTL838X_IO_DRIVING_ABILITY_CTRL (0x1010) - -#define RTL838X_GPIO_A7 31 -#define RTL838X_GPIO_A6 30 -#define RTL838X_GPIO_A5 29 -#define RTL838X_GPIO_A4 28 -#define RTL838X_GPIO_A3 27 -#define RTL838X_GPIO_A2 26 -#define RTL838X_GPIO_A1 25 -#define RTL838X_GPIO_A0 24 -#define RTL838X_GPIO_B7 23 -#define RTL838X_GPIO_B6 22 -#define RTL838X_GPIO_B5 21 -#define RTL838X_GPIO_B4 20 -#define RTL838X_GPIO_B3 19 -#define RTL838X_GPIO_B2 18 -#define RTL838X_GPIO_B1 17 -#define RTL838X_GPIO_B0 16 -#define RTL838X_GPIO_C7 15 -#define RTL838X_GPIO_C6 14 -#define RTL838X_GPIO_C5 13 -#define RTL838X_GPIO_C4 12 -#define RTL838X_GPIO_C3 11 -#define RTL838X_GPIO_C2 10 -#define RTL838X_GPIO_C1 9 -#define RTL838X_GPIO_C0 8 - -#define RTL838X_INT_RW_CTRL (0x0058) -#define RTL838X_EXT_VERSION (0x00D0) -#define RTL838X_PLL_CML_CTRL (0x0FF8) -#define RTL838X_STRAP_DBG (0x100C) - -/* - * Reset - */ -#define RGCR (0x1E70) -#define RTL838X_RST_GLB_CTRL_0 (0x003c) -#define RTL838X_RST_GLB_CTRL_1 (0x0040) -#define RTL839X_RST_GLB_CTRL (0x0014) -#define RTL930X_RST_GLB_CTRL_0 (0x000c) -#define RTL931X_RST_GLB_CTRL (0x0400) - -/* LED control by switch */ -#define RTL838X_LED_MODE_SEL (0x1004) -#define RTL838X_LED_MODE_CTRL (0xA004) -#define RTL838X_LED_P_EN_CTRL (0xA008) - -/* LED control by software */ -#define RTL838X_LED_SW_CTRL (0xA00C) -#define RTL839X_LED_SW_CTRL (0xA00C) -#define RTL838X_LED_SW_P_EN_CTRL (0xA010) -#define RTL839X_LED_SW_P_EN_CTRL (0x012C) -#define RTL838X_LED0_SW_P_EN_CTRL (0xA010) -#define RTL839X_LED0_SW_P_EN_CTRL (0x012C) -#define RTL838X_LED1_SW_P_EN_CTRL (0xA014) -#define RTL839X_LED1_SW_P_EN_CTRL (0x0130) -#define RTL838X_LED2_SW_P_EN_CTRL (0xA018) -#define RTL839X_LED2_SW_P_EN_CTRL (0x0134) -#define RTL838X_LED_SW_P_CTRL (0xA01C) -#define RTL838X_LED_SW_P_CTRL_PORT(p) (RTL838X_LED_SW_P_CTRL + (((p) << 2))) -#define RTL839X_LED_SW_P_CTRL (0x0144) - -#define RTL839X_MAC_EFUSE_CTRL (0x02ac) - -/* - * MDIO via Realtek's SMI interface - */ -#define RTL838X_SMI_GLB_CTRL (0xa100) -#define RTL838X_SMI_ACCESS_PHY_CTRL_0 (0xa1b8) -#define RTL838X_SMI_ACCESS_PHY_CTRL_1 (0xa1bc) -#define RTL838X_SMI_ACCESS_PHY_CTRL_2 (0xa1c0) -#define RTL838X_SMI_ACCESS_PHY_CTRL_3 (0xa1c4) -#define RTL838X_SMI_PORT0_5_ADDR_CTRL (0xa1c8) -#define RTL838X_SMI_POLL_CTRL (0xa17c) - -#define RTL839X_SMI_GLB_CTRL (0x03f8) -#define RTL839X_SMI_PORT_POLLING_CTRL (0x03fc) -#define RTL839X_PHYREG_ACCESS_CTRL (0x03DC) -#define RTL839X_PHYREG_CTRL (0x03E0) -#define RTL839X_PHYREG_PORT_CTRL (0x03E4) -#define RTL839X_PHYREG_DATA_CTRL (0x03F0) -#define RTL839X_PHYREG_MMD_CTRL (0x3F4) - -#define RTL930X_SMI_GLB_CTRL (0xCA00) -#define RTL930X_SMI_POLL_CTRL (0xca90) -#define RTL930X_SMI_PORT0_15_POLLING_SEL (0xCA08) -#define RTL930X_SMI_PORT16_27_POLLING_SEL (0xCA0C) -#define RTL930X_SMI_PORT0_5_ADDR (0xCB80) -#define RTL930X_SMI_ACCESS_PHY_CTRL_0 (0xCB70) -#define RTL930X_SMI_ACCESS_PHY_CTRL_1 (0xCB74) -#define RTL930X_SMI_ACCESS_PHY_CTRL_2 (0xCB78) -#define RTL930X_SMI_ACCESS_PHY_CTRL_3 (0xCB7C) - -#define RTL931X_SMI_GLB_CTRL1 (0x0CBC) -#define RTL931X_SMI_GLB_CTRL0 (0x0CC0) -#define RTL931X_SMI_PORT_POLLING_CTRL (0x0CCC) -#define RTL931X_SMI_PORT_ADDR (0x0C74) -#define RTL931X_SMI_PORT_POLLING_SEL (0x0C9C) -#define RTL9310_SMI_PORT_POLLING_CTRL (0x0CCC) -#define RTL931X_SMI_INDRT_ACCESS_CTRL_0 (0x0C00) -#define RTL931X_SMI_INDRT_ACCESS_CTRL_1 (0x0C04) -#define RTL931X_SMI_INDRT_ACCESS_CTRL_2 (0x0C08) -#define RTL931X_SMI_INDRT_ACCESS_CTRL_3 (0x0C10) -#define RTL931X_SMI_INDRT_ACCESS_BC_PHYID_CTRL (0x0C14) -#define RTL931X_SMI_INDRT_ACCESS_MMD_CTRL (0xC18) -#define RTL931X_MAC_L2_GLOBAL_CTRL2 (0x1358) -#define RTL931X_MAC_L2_GLOBAL_CTRL1 (0x5548) - -/* Switch interrupts */ -#define RTL838X_IMR_GLB (0x1100) -#define RTL838X_IMR_PORT_LINK_STS_CHG (0x1104) -#define RTL838X_ISR_GLB_SRC (0x1148) -#define RTL838X_ISR_PORT_LINK_STS_CHG (0x114C) - -#define RTL839X_IMR_GLB (0x0064) -#define RTL839X_IMR_PORT_LINK_STS_CHG (0x0068) -#define RTL839X_ISR_GLB_SRC (0x009c) -#define RTL839X_ISR_PORT_LINK_STS_CHG (0x00a0) - -#define RTL930X_IMR_GLB (0xC628) -#define RTL930X_IMR_PORT_LINK_STS_CHG (0xC62C) -#define RTL930X_ISR_GLB (0xC658) -#define RTL930X_ISR_PORT_LINK_STS_CHG (0xC660) - -/* IMR_GLB does not exit on RTL931X */ -#define RTL931X_IMR_PORT_LINK_STS_CHG (0x126C) -#define RTL931X_ISR_GLB_SRC (0x12B4) -#define RTL931X_ISR_PORT_LINK_STS_CHG (0x12B8) - -/* Definition of family IDs */ -#define RTL8389_FAMILY_ID (0x8389) -#define RTL8328_FAMILY_ID (0x8328) -#define RTL8390_FAMILY_ID (0x8390) -#define RTL8350_FAMILY_ID (0x8350) -#define RTL8380_FAMILY_ID (0x8380) -#define RTL8330_FAMILY_ID (0x8330) -#define RTL9300_FAMILY_ID (0x9300) -#define RTL9310_FAMILY_ID (0x9310) - -/* SPI Support */ -#define RTL931X_SPI_CTRL0 (0x103C) - -/* Basic SoC Features */ -#define RTL838X_CPU_PORT 28 -#define RTL839X_CPU_PORT 52 -#define RTL930X_CPU_PORT 28 -#define RTL931X_CPU_PORT 56 - -struct rtl83xx_soc_info { - unsigned char *name; - unsigned int id; - unsigned int family; - unsigned char *compatible; - volatile void *sw_base; - volatile void *icu_base; - int cpu_port; -}; - -/* rtl83xx-related functions used across subsystems */ -int rtl838x_smi_wait_op(int timeout); -int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val); -int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val); -int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val); -int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val); - -#endif /* _MACH_RTL838X_H_ */ diff --git a/target/linux/realtek/files-5.15/arch/mips/rtl838x/Makefile b/target/linux/realtek/files-5.15/arch/mips/rtl838x/Makefile deleted file mode 100644 index a9d1666d46..0000000000 --- a/target/linux/realtek/files-5.15/arch/mips/rtl838x/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the rtl838x specific parts of the kernel -# - -obj-y := setup.o prom.o diff --git a/target/linux/realtek/files-5.15/arch/mips/rtl838x/Platform b/target/linux/realtek/files-5.15/arch/mips/rtl838x/Platform deleted file mode 100644 index 98f18cac1b..0000000000 --- a/target/linux/realtek/files-5.15/arch/mips/rtl838x/Platform +++ /dev/null @@ -1,5 +0,0 @@ -# -# Realtek RTL838x SoCs -# -cflags-$(CONFIG_RTL83XX) += -I$(srctree)/arch/mips/include/asm/mach-rtl838x/ -load-$(CONFIG_RTL83XX) += 0xffffffff80100000 diff --git a/target/linux/realtek/files-5.15/arch/mips/rtl838x/prom.c b/target/linux/realtek/files-5.15/arch/mips/rtl838x/prom.c deleted file mode 100644 index 0c98af9548..0000000000 --- a/target/linux/realtek/files-5.15/arch/mips/rtl838x/prom.c +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * prom.c - * Early intialization code for the Realtek RTL838X SoC - * - * based on the original BSP by - * Copyright (C) 2006-2012 Tony Wu (tonywu@realtek.com) - * Copyright (C) 2020 B. Koblitz - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -extern char arcs_cmdline[]; - -struct rtl83xx_soc_info soc_info; -const void *fdt; - -#ifdef CONFIG_MIPS_MT_SMP -extern const struct plat_smp_ops vsmp_smp_ops; -static struct plat_smp_ops rtl_smp_ops; - -static void rtl_init_secondary(void) -{ -#ifndef CONFIG_CEVT_R4K -/* - * These devices are low on resources. There might be the chance that CEVT_R4K - * is not enabled in kernel build. Nevertheless the timer and interrupt 7 might - * be active by default after startup of secondary VPE. With no registered - * handler that leads to continuous unhandeled interrupts. In this case disable - * counting (DC) in the core and confirm a pending interrupt. - */ - write_c0_cause(read_c0_cause() | CAUSEF_DC); - write_c0_compare(0); -#endif /* CONFIG_CEVT_R4K */ -/* - * Enable all CPU interrupts, as everything is managed by the external - * controller. TODO: Standard vsmp_init_secondary() has special treatment for - * Malta if external GIC is available. Maybe we need this too. - */ - if (mips_gic_present()) - pr_warn("%s: GIC present. Maybe interrupt enabling required.\n", __func__); - else - set_c0_status(ST0_IM); -} -#endif /* CONFIG_MIPS_MT_SMP */ - -const char *get_system_type(void) -{ - return soc_info.name; -} - -void __init prom_free_prom_memory(void) -{ - -} - -void __init device_tree_init(void) -{ - if (!fdt_check_header(&__appended_dtb)) { - fdt = &__appended_dtb; - pr_info("Using appended Device Tree.\n"); - } - initial_boot_params = (void *)fdt; - unflatten_and_copy_device_tree(); -} - -void __init identify_rtl9302(void) -{ - switch (sw_r32(RTL93XX_MODEL_NAME_INFO) & 0xfffffff0) { - case 0x93020810: - soc_info.name = "RTL9302A 12x2.5G"; - break; - case 0x93021010: - soc_info.name = "RTL9302B 8x2.5G"; - break; - case 0x93021810: - soc_info.name = "RTL9302C 16x2.5G"; - break; - case 0x93022010: - soc_info.name = "RTL9302D 24x2.5G"; - break; - case 0x93020800: - soc_info.name = "RTL9302A"; - break; - case 0x93021000: - soc_info.name = "RTL9302B"; - break; - case 0x93021800: - soc_info.name = "RTL9302C"; - break; - case 0x93022000: - soc_info.name = "RTL9302D"; - break; - case 0x93023001: - soc_info.name = "RTL9302F"; - break; - default: - soc_info.name = "RTL9302"; - } -} - -void __init prom_init(void) -{ - uint32_t model; - - model = sw_r32(RTL838X_MODEL_NAME_INFO); - pr_info("RTL838X model is %x\n", model); - model = model >> 16 & 0xFFFF; - - if ((model != 0x8328) && (model != 0x8330) && (model != 0x8332) - && (model != 0x8380) && (model != 0x8382)) { - model = sw_r32(RTL839X_MODEL_NAME_INFO); - pr_info("RTL839X model is %x\n", model); - model = model >> 16 & 0xFFFF; - } - - if ((model & 0x8390) != 0x8380 && (model & 0x8390) != 0x8390) { - model = sw_r32(RTL93XX_MODEL_NAME_INFO); - pr_info("RTL93XX model is %x\n", model); - model = model >> 16 & 0xFFFF; - } - - soc_info.id = model; - - switch (model) { - case 0x8328: - soc_info.name = "RTL8328"; - soc_info.family = RTL8328_FAMILY_ID; - break; - case 0x8332: - soc_info.name = "RTL8332"; - soc_info.family = RTL8380_FAMILY_ID; - break; - case 0x8380: - soc_info.name = "RTL8380"; - soc_info.family = RTL8380_FAMILY_ID; - break; - case 0x8382: - soc_info.name = "RTL8382"; - soc_info.family = RTL8380_FAMILY_ID; - break; - case 0x8390: - soc_info.name = "RTL8390"; - soc_info.family = RTL8390_FAMILY_ID; - break; - case 0x8391: - soc_info.name = "RTL8391"; - soc_info.family = RTL8390_FAMILY_ID; - break; - case 0x8392: - soc_info.name = "RTL8392"; - soc_info.family = RTL8390_FAMILY_ID; - break; - case 0x8393: - soc_info.name = "RTL8393"; - soc_info.family = RTL8390_FAMILY_ID; - break; - case 0x9301: - soc_info.name = "RTL9301"; - soc_info.family = RTL9300_FAMILY_ID; - break; - case 0x9302: - identify_rtl9302(); - soc_info.family = RTL9300_FAMILY_ID; - break; - case 0x9303: - soc_info.name = "RTL9303"; - soc_info.family = RTL9300_FAMILY_ID; - break; - case 0x9313: - soc_info.name = "RTL9313"; - soc_info.family = RTL9310_FAMILY_ID; - break; - default: - soc_info.name = "DEFAULT"; - soc_info.family = 0; - } - - pr_info("SoC Type: %s\n", get_system_type()); - - fw_init_cmdline(); - - mips_cpc_probe(); - - if (!register_cps_smp_ops()) - return; - -#ifdef CONFIG_MIPS_MT_SMP - if (cpu_has_mipsmt) { - rtl_smp_ops = vsmp_smp_ops; - rtl_smp_ops.init_secondary = rtl_init_secondary; - register_smp_ops(&rtl_smp_ops); - return; - } -#endif - - register_up_smp_ops(); -} diff --git a/target/linux/realtek/files-5.15/arch/mips/rtl838x/setup.c b/target/linux/realtek/files-5.15/arch/mips/rtl838x/setup.c deleted file mode 100644 index 546b2fa2f8..0000000000 --- a/target/linux/realtek/files-5.15/arch/mips/rtl838x/setup.c +++ /dev/null @@ -1,102 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Setup for the Realtek RTL838X SoC: - * Memory, Timer and Serial - * - * Copyright (C) 2020 B. Koblitz - * based on the original BSP by - * Copyright (C) 2006-2012 Tony Wu (tonywu@realtek.com) - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "mach-rtl83xx.h" - -extern struct rtl83xx_soc_info soc_info; - -void __init plat_mem_setup(void) -{ - void *dtb; - - set_io_port_base(KSEG1); - - dtb = get_fdt(); - if (!dtb) - panic("no dtb found"); - - /* - * Load the devicetree. This causes the chosen node to be - * parsed resulting in our memory appearing - */ - __dt_setup_arch(dtb); -} - -void plat_time_init_fallback(void) -{ - struct device_node *np; - u32 freq = 500000000; - - np = of_find_node_by_name(NULL, "cpus"); - if (!np) { - pr_err("Missing 'cpus' DT node, using default frequency."); - } else { - if (of_property_read_u32(np, "frequency", &freq) < 0) - pr_err("No 'frequency' property in DT, using default."); - else - pr_info("CPU frequency from device tree: %dMHz", freq / 1000000); - of_node_put(np); - } - mips_hpt_frequency = freq / 2; -} - -void __init plat_time_init(void) -{ -/* - * Initialization routine resembles generic MIPS plat_time_init() with - * lazy error handling. The final fallback is only needed until we have - * converted all device trees to new clock syntax. - */ - struct device_node *np; - struct clk *clk; - - of_clk_init(NULL); - - mips_hpt_frequency = 0; - np = of_get_cpu_node(0, NULL); - if (!np) { - pr_err("Failed to get CPU node\n"); - } else { - clk = of_clk_get(np, 0); - if (IS_ERR(clk)) { - pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk)); - } else { - mips_hpt_frequency = clk_get_rate(clk) / 2; - clk_put(clk); - } - } - - if (!mips_hpt_frequency) - plat_time_init_fallback(); - - timer_probe(); -} - -void __init arch_init_irq(void) -{ - irqchip_init(); -} diff --git a/target/linux/realtek/files-5.15/drivers/clk/realtek/Kconfig b/target/linux/realtek/files-5.15/drivers/clk/realtek/Kconfig deleted file mode 100644 index 4cf3cd9633..0000000000 --- a/target/linux/realtek/files-5.15/drivers/clk/realtek/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - -menuconfig COMMON_CLK_REALTEK - bool "Support for Realtek's clock controllers" - depends on RTL83XX - -if COMMON_CLK_REALTEK - -config COMMON_CLK_RTL83XX - bool "Clock driver for Realtek RTL83XX" - depends on RTL83XX - select SRAM - help - This driver adds support for the Realtek RTL83xx series basic clocks. - This includes chips in the RTL838x series, such as RTL8380, RTL8381, - RTL832, as well as chips from the RTL839x series, such as RTL8390, - RT8391, RTL8392, RTL8393 and RTL8396. - -endif diff --git a/target/linux/realtek/files-5.15/drivers/clk/realtek/Makefile b/target/linux/realtek/files-5.15/drivers/clk/realtek/Makefile deleted file mode 100644 index 7bc4ed910c..0000000000 --- a/target/linux/realtek/files-5.15/drivers/clk/realtek/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_COMMON_CLK_RTL83XX) += clk-rtl83xx.o clk-rtl838x-sram.o clk-rtl839x-sram.o diff --git a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl838x-sram.S b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl838x-sram.S deleted file mode 100644 index 2431723133..0000000000 --- a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl838x-sram.S +++ /dev/null @@ -1,149 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Realtek RTL838X SRAM clock setters - * Copyright (C) 2022 Markus Stockhausen - */ - -#include - -#include "clk-rtl83xx.h" - -#define rGLB $t0 -#define rCTR $t1 -#define rMSK $t2 -#define rSLP $t3 -#define rTMP $t4 - -.set noreorder - -.globl rtcl_838x_dram_start -rtcl_838x_dram_start: - -/* - * Functions start here and should avoid access to normal memory. REMARK! Do not forget about - * stack pointer and dirty caches that might interfere. - */ - -.globl rtcl_838x_dram_set_rate -.ent rtcl_838x_dram_set_rate -rtcl_838x_dram_set_rate: - -#ifdef CONFIG_RTL838X - - li rCTR, RTL_SW_CORE_BASE - addiu rGLB, rCTR, RTL838X_PLL_GLB_CTRL - ori rTMP, $0, CLK_CPU - beq $a0, rTMP, pre_cpu - ori rTMP, $0, CLK_MEM - beq $a0, rTMP, pre_mem - nop -pre_lxb: - ori rSLP, $0, RTL838X_GLB_CTRL_LXB_PLL_READY_MASK - addiu rCTR, rCTR, RTL838X_PLL_LXB_CTRL0 - b main_set - ori rMSK, $0, RTL838X_GLB_CTRL_EN_LXB_PLL_MASK -pre_mem: - /* simple 64K data cache flush to avoid unexpected memory access */ - li rMSK, RTL_SRAM_BASE - li rTMP, 2048 -pre_flush: - lw $0, 0(rMSK) - addiu rMSK, rMSK, 32 - addiu rTMP, rTMP, -1 - bne rTMP, $0, pre_flush - lw $0, -4(rMSK) - - ori rSLP, $0, RTL838X_GLB_CTRL_MEM_PLL_READY_MASK - addiu rCTR, rCTR, RTL838X_PLL_MEM_CTRL0 - b main_set - ori rMSK, $0, RTL838X_GLB_CTRL_EN_MEM_PLL_MASK -pre_cpu: - /* switch CPU to LXB clock */ - ori rMSK, $0, RTL838X_GLB_CTRL_CPU_PLL_SC_MUX_MASK - nor rMSK, rMSK, $0 - sync - lw rTMP, 0(rGLB) - and rTMP, rTMP, rMSK - sw rTMP, 0(rGLB) - sync - - ori rSLP, $0, RTL838X_GLB_CTRL_CPU_PLL_READY_MASK - addiu rCTR, rCTR, RTL838X_PLL_CPU_CTRL0 - ori rMSK, $0, RTL838X_GLB_CTRL_EN_CPU_PLL_MASK -main_set: - /* disable PLL */ - nor rMSK, rMSK, 0 - sync - lw rTMP, 0(rGLB) - sync - and rTMP, rTMP, rMSK - sync - sw rTMP, 0(rGLB) - - /* set new PLL values */ - sync - sw $a1, 0(rCTR) - sw $a2, 4(rCTR) - sync - - /* enable PLL (will reset it and clear ready status) */ - nor rMSK, rMSK, 0 - sync - lw rTMP, 0(rGLB) - sync - or rTMP, rTMP, rMSK - sync - sw rTMP, 0(rGLB) - - /* wait for PLL to become ready */ -wait_ready: - lw rTMP, 0(rGLB) - and rTMP, rTMP, rSLP - bne rTMP, $0, wait_ready - sync - - /* branch to post processing */ - ori rTMP, $0, CLK_CPU - beq $a0, rTMP, post_cpu - ori rTMP, $0, CLK_MEM - beq $a0, rTMP, post_mem - nop -post_lxb: - jr $ra - nop -post_mem: - jr $ra - nop -post_cpu: - /* stabilize clock to avoid crash, empirically determined */ - ori rSLP, $0, 0x3000 -wait_cpu: - bnez rSLP, wait_cpu - addiu rSLP, rSLP, -1 - - /* switch CPU to PLL clock */ - ori rMSK, $0, RTL838X_GLB_CTRL_CPU_PLL_SC_MUX_MASK - sync - lw rTMP, 0(rGLB) - or rTMP, rTMP, rMSK - sw rTMP, 0(rGLB) - sync - jr $ra - nop - -#else /* !CONFIG_RTL838X */ - - jr $ra - nop - -#endif - -.end rtcl_838x_dram_set_rate - -/* - * End marker. Do not delete. - */ - .word RTL_SRAM_MARKER -.globl rtcl_838x_dram_size -rtcl_838x_dram_size: - .word .-rtcl_838x_dram_start diff --git a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl839x-sram.S b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl839x-sram.S deleted file mode 100644 index eb44cd90f1..0000000000 --- a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl839x-sram.S +++ /dev/null @@ -1,141 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Realtek RTL839X SRAM clock setters - * Copyright (C) 2022 Markus Stockhausen - */ - -#include -#include - -#include "clk-rtl83xx.h" - -#define rGLB $t0 -#define rCTR $t1 -#define rMSK $t2 -#define rSLP1 $t3 -#define rSLP2 $t4 -#define rSLP3 $t5 -#define rTMP $t6 -#define rCP0 $t7 - -.set noreorder - -.globl rtcl_839x_dram_start -rtcl_839x_dram_start: - -/* - * Functions start here and should avoid access to normal memory. REMARK! Do not forget about - * stack pointer and dirty caches that might interfere. - */ - -.globl rtcl_839x_dram_set_rate -.ent rtcl_839x_dram_set_rate -rtcl_839x_dram_set_rate: - -#ifdef CONFIG_RTL839X - - /* disable MIPS 34K branch and return prediction */ - mfc0 rCP0, CP0_CONFIG, 7 - ori rTMP, rCP0, 0xc - mtc0 rTMP, CP0_CONFIG, 7 - - li rCTR, RTL_SW_CORE_BASE - addiu rGLB, rCTR, RTL839X_PLL_GLB_CTRL - ori rTMP, $0, CLK_CPU - beq $a0, rTMP, pre_cpu - ori rTMP, $0, CLK_MEM - beq $a0, rTMP, pre_mem - nop -pre_lxb: - li rSLP1, 0x400000 - li rSLP2, 0x400000 - li rSLP3, 0x400000 - addiu rCTR, rCTR, RTL839X_PLL_LXB_CTRL0 - b main_set - ori rMSK, $0, RTL839X_GLB_CTRL_LXB_CLKSEL_MASK -pre_mem: - /* try to avoid memory access with simple 64K data cache flush */ - li rMSK, RTL_SRAM_BASE - li rTMP, 2048 -pre_flush: - lw $0, 0(rMSK) - addiu rMSK, rMSK, 32 - addiu rTMP, rTMP, -1 - bne rTMP, $0, pre_flush - lw $0, -4(rMSK) - - li rSLP1, 0x10000 - li rSLP2, 0x10000 - li rSLP3, 0x10000 - addiu rCTR, rCTR, RTL839X_PLL_MEM_CTRL0 - b main_set - ori rMSK, $0, RTL839X_GLB_CTRL_MEM_CLKSEL_MASK -pre_cpu: - li rSLP1, 0x1000 - li rSLP2, 0x1000 - li rSLP3, 0x200 - addiu rCTR, rCTR, RTL839X_PLL_CPU_CTRL0 - ori rMSK, $0, RTL839X_GLB_CTRL_CPU_CLKSEL_MASK -main_set: - /* switch to fixed clock */ - sync - lw rTMP, 0(rGLB) - sync - or rTMP, rTMP, rMSK - sync - sw rTMP, 0(rGLB) - - /* wait until fixed clock in use */ - or rTMP, rSLP1, $0 -wait_fixclock: - bnez rTMP, wait_fixclock - addiu rTMP, rTMP, -1 - - /* set new PLL values */ - sync - sw $a1, 0(rCTR) - sw $a2, 4(rCTR) - sync - - /* wait for value takeover */ - or rTMP, rSLP2, $0 -wait_pll: - bnez rTMP, wait_pll - addiu rTMP, rTMP, -1 - - /* switch back to PLL clock*/ - nor rMSK, rMSK, $0 - sync - lw rTMP, 0(rGLB) - sync - and rTMP, rTMP, rMSK - sync - sw rTMP, 0(rGLB) - - /* wait until PLL clock in use */ - or rTMP, rSLP3, $0 -wait_pllclock: - bnez rTMP, wait_pllclock - addiu rTMP, rTMP, -1 - - /* restore branch prediction */ - mtc0 rCP0, CP0_CONFIG, 7 - jr $ra - nop - -#else /* !CONFIG_RTL839X */ - - jr $ra - nop - -#endif - -.end rtcl_839x_dram_set_rate - -/* - * End marker. Do not delete. - */ - .word RTL_SRAM_MARKER -.globl rtcl_839x_dram_size -rtcl_839x_dram_size: - .word .-rtcl_839x_dram_start diff --git a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.c b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.c deleted file mode 100644 index 0cca32ab34..0000000000 --- a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.c +++ /dev/null @@ -1,770 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Realtek RTL83XX clock driver - * Copyright (C) 2022 Markus Stockhausen - * - * This driver provides basic clock support for the central core clock unit (CCU) and its PLLs - * inside the RTL838X and RTL8389X SOC. Currently CPU, memory and LXB clock information can be - * accessed. To make use of the driver add the following devices and configurations at the - * appropriate locations to the DT. - * - * #include - * - * sram0: sram@9f000000 { - * compatible = "mmio-sram"; - * reg = <0x9f000000 0x18000>; - * #address-cells = <1>; - * #size-cells = <1>; - * ranges = <0 0x9f000000 0x18000>; - * }; - * - * osc: oscillator { - * compatible = "fixed-clock"; - * #clock-cells = <0>; - * clock-frequency = <25000000>; - * }; - * - * ccu: clock-controller { - * compatible = "realtek,rtl8380-clock"; - * #clock-cells = <1>; - * clocks = <&osc>; - * clock-names = "ref_clk"; - * }; - * - * - * The SRAM part is needed to be able to set clocks. When changing clocks the code must not run - * from DRAM. Otherwise system might freeze. Take care to adjust CCU compatibility, SRAM address - * and size to the target SOC device. Afterwards one can access/identify the clocks in the other - * DT devices with <&ccu CLK_CPU>, <&ccu CLK_MEM> or <&ccu CLK_LXB>. Additionally the clocks can - * be used inside the kernel with - * - * cpu_clk = clk_get(NULL, "cpu_clk"); - * mem_clk = clk_get(NULL, "mem_clk"); - * lxb_clk = clk_get(NULL, "lxb_clk"); - * - * This driver can be directly used by the DT based cpufreq driver (CONFIG_CPUFREQ_DT) if CPU - * references the right clock and sane operating points (OPP) are provided. E.g. - * - * cpu@0 { - * compatible = "mips,mips4KEc"; - * reg = <0>; - * clocks = <&ccu CLK_CPU>; - * operating-points-v2 = <&cpu_opp_table>; - * }; - * - * cpu_opp_table: opp-table-0 { - * compatible = "operating-points-v2"; - * opp-shared; - * opp00 { - * opp-hz = /bits/ 64 <425000000>; - * }; - * ... - * } - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "clk-rtl83xx.h" - -#define read_sw(reg) ioread32(((void *)RTL_SW_CORE_BASE) + reg) -#define read_soc(reg) ioread32(((void *)RTL_SOC_BASE) + reg) - -#define write_sw(val, reg) iowrite32(val, ((void *)RTL_SW_CORE_BASE) + reg) -#define write_soc(val, reg) iowrite32(val, ((void *)RTL_SOC_BASE) + reg) - -/* - * some hardware specific definitions - */ - -#define SOC_RTL838X 0 -#define SOC_RTL839X 1 -#define SOC_COUNT 2 - -#define MEM_DDR1 1 -#define MEM_DDR2 2 -#define MEM_DDR3 3 - -#define REG_CTRL0 0 -#define REG_CTRL1 1 -#define REG_COUNT 2 - -#define OSC_RATE 25000000 - -static const int rtcl_regs[SOC_COUNT][REG_COUNT][CLK_COUNT] = { - { - { RTL838X_PLL_CPU_CTRL0, RTL838X_PLL_MEM_CTRL0, RTL838X_PLL_LXB_CTRL0 }, - { RTL838X_PLL_CPU_CTRL1, RTL838X_PLL_MEM_CTRL1, RTL838X_PLL_LXB_CTRL1 }, - }, { - { RTL839X_PLL_CPU_CTRL0, RTL839X_PLL_MEM_CTRL0, RTL839X_PLL_LXB_CTRL0 }, - { RTL839X_PLL_CPU_CTRL1, RTL839X_PLL_MEM_CTRL1, RTL839X_PLL_LXB_CTRL1 }, - } -}; - -#define RTCL_REG_SET(_rate, _ctrl0, _ctrl1) \ - { \ - .rate = _rate, \ - .ctrl0 = _ctrl0, \ - .ctrl1 = _ctrl1, \ - } - -struct rtcl_reg_set { - unsigned int rate; - unsigned int ctrl0; - unsigned int ctrl1; -}; - -/* - * The following configuration tables are valid operation points for their - * corresponding PLLs. The magic numbers are precalculated mulitpliers and - * dividers to keep the driver simple. They also provide rates outside the - * allowed physical specifications. E.g. DDR3 memory has a lower limit of 303 - * MHz or the CPU might get unstable if set to anything above its startup - * frequency. Additionally the Realtek SOCs tend to expect CPU speed larger - * than MEM speed larger than LXB speed. The caller or DT configuration must - * take care that only valid operating points are selected. - */ - -static const struct rtcl_reg_set rtcl_838x_cpu_reg_set[] = { - RTCL_REG_SET(300000000, 0x045c8, 0x1414530e), - RTCL_REG_SET(325000000, 0x04648, 0x1414530e), - RTCL_REG_SET(350000000, 0x046c8, 0x1414530e), - RTCL_REG_SET(375000000, 0x04748, 0x1414530e), - RTCL_REG_SET(400000000, 0x045c8, 0x0c14530e), - RTCL_REG_SET(425000000, 0x04628, 0x0c14530e), - RTCL_REG_SET(450000000, 0x04688, 0x0c14530e), - RTCL_REG_SET(475000000, 0x046e8, 0x0c14530e), - RTCL_REG_SET(500000000, 0x04748, 0x0c14530e), - RTCL_REG_SET(525000000, 0x047a8, 0x0c14530e), - RTCL_REG_SET(550000000, 0x04808, 0x0c14530e), - RTCL_REG_SET(575000000, 0x04868, 0x0c14530e), - RTCL_REG_SET(600000000, 0x048c8, 0x0c14530e), - RTCL_REG_SET(625000000, 0x04928, 0x0c14530e) -}; - -static const struct rtcl_reg_set rtcl_838x_mem_reg_set[] = { - RTCL_REG_SET(200000000, 0x041bc, 0x14018C80), - RTCL_REG_SET(225000000, 0x0417c, 0x0c018C80), - RTCL_REG_SET(250000000, 0x041ac, 0x0c018C80), - RTCL_REG_SET(275000000, 0x0412c, 0x04018C80), - RTCL_REG_SET(300000000, 0x0414c, 0x04018c80), - RTCL_REG_SET(325000000, 0x0416c, 0x04018c80), - RTCL_REG_SET(350000000, 0x0418c, 0x04018c80), - RTCL_REG_SET(375000000, 0x041ac, 0x04018c80) -}; - -static const struct rtcl_reg_set rtcl_838x_lxb_reg_set[] = { - RTCL_REG_SET(100000000, 0x043c8, 0x001ad30e), - RTCL_REG_SET(125000000, 0x043c8, 0x001ad30e), - RTCL_REG_SET(150000000, 0x04508, 0x1c1ad30e), - RTCL_REG_SET(175000000, 0x04508, 0x1c1ad30e), - RTCL_REG_SET(200000000, 0x047c8, 0x001ad30e) -}; - -static const struct rtcl_reg_set rtcl_839x_cpu_reg_set[] = { - RTCL_REG_SET(400000000, 0x0414c, 0x00000005), - RTCL_REG_SET(425000000, 0x041ec, 0x00000006), - RTCL_REG_SET(450000000, 0x0417c, 0x00000005), - RTCL_REG_SET(475000000, 0x0422c, 0x00000006), - RTCL_REG_SET(500000000, 0x041ac, 0x00000005), - RTCL_REG_SET(525000000, 0x0426c, 0x00000006), - RTCL_REG_SET(550000000, 0x0412c, 0x00000004), - RTCL_REG_SET(575000000, 0x042ac, 0x00000006), - RTCL_REG_SET(600000000, 0x0414c, 0x00000004), - RTCL_REG_SET(625000000, 0x042ec, 0x00000006), - RTCL_REG_SET(650000000, 0x0416c, 0x00000004), - RTCL_REG_SET(675000000, 0x04324, 0x00000006), - RTCL_REG_SET(700000000, 0x0418c, 0x00000004), - RTCL_REG_SET(725000000, 0x0436c, 0x00000006), - RTCL_REG_SET(750000000, 0x0438c, 0x00000006), - RTCL_REG_SET(775000000, 0x043ac, 0x00000006), - RTCL_REG_SET(800000000, 0x043cc, 0x00000006), - RTCL_REG_SET(825000000, 0x043ec, 0x00000006), - RTCL_REG_SET(850000000, 0x0440c, 0x00000006) -}; - -static const struct rtcl_reg_set rtcl_839x_mem_reg_set[] = { - RTCL_REG_SET(100000000, 0x041cc, 0x00000000), - RTCL_REG_SET(125000000, 0x041ac, 0x00000007), - RTCL_REG_SET(150000000, 0x0414c, 0x00000006), - RTCL_REG_SET(175000000, 0x0418c, 0x00000006), - RTCL_REG_SET(200000000, 0x041cc, 0x00000006), - RTCL_REG_SET(225000000, 0x0417c, 0x00000005), - RTCL_REG_SET(250000000, 0x041ac, 0x00000005), - RTCL_REG_SET(275000000, 0x0412c, 0x00000004), - RTCL_REG_SET(300000000, 0x0414c, 0x00000004), - RTCL_REG_SET(325000000, 0x0416c, 0x00000004), - RTCL_REG_SET(350000000, 0x0418c, 0x00000004), - RTCL_REG_SET(375000000, 0x041ac, 0x00000004), - RTCL_REG_SET(400000000, 0x041cc, 0x00000004) -}; - -static const struct rtcl_reg_set rtcl_839x_lxb_reg_set[] = { - RTCL_REG_SET(50000000, 0x1414c, 0x00000003), - RTCL_REG_SET(100000000, 0x0814c, 0x00000003), - RTCL_REG_SET(150000000, 0x0414c, 0x00000003), - RTCL_REG_SET(200000000, 0x0414c, 0x00000007) -}; - -struct rtcl_rtab_set { - int count; - const struct rtcl_reg_set *rset; -}; - -#define RTCL_RTAB_SET(_rset) \ - { \ - .count = ARRAY_SIZE(_rset), \ - .rset = _rset, \ - } - -static const struct rtcl_rtab_set rtcl_rtab_set[SOC_COUNT][CLK_COUNT] = { - { - RTCL_RTAB_SET(rtcl_838x_cpu_reg_set), - RTCL_RTAB_SET(rtcl_838x_mem_reg_set), - RTCL_RTAB_SET(rtcl_838x_lxb_reg_set) - }, { - RTCL_RTAB_SET(rtcl_839x_cpu_reg_set), - RTCL_RTAB_SET(rtcl_839x_mem_reg_set), - RTCL_RTAB_SET(rtcl_839x_lxb_reg_set) - } -}; - -#define RTCL_ROUND_SET(_min, _max, _step) \ - { \ - .min = _min, \ - .max = _max, \ - .step = _step, \ - } - -struct rtcl_round_set { - unsigned long min; - unsigned long max; - unsigned long step; -}; - -static const struct rtcl_round_set rtcl_round_set[SOC_COUNT][CLK_COUNT] = { - { - RTCL_ROUND_SET(300000000, 625000000, 25000000), - RTCL_ROUND_SET(200000000, 375000000, 25000000), - RTCL_ROUND_SET(100000000, 200000000, 25000000) - }, { - RTCL_ROUND_SET(400000000, 850000000, 25000000), - RTCL_ROUND_SET(100000000, 400000000, 25000000), - RTCL_ROUND_SET(50000000, 200000000, 50000000) - } -}; - -static const int rtcl_divn3[] = { 2, 3, 4, 6 }; -static const int rtcl_xdiv[] = { 2, 4, 2 }; - -/* - * module data structures - */ - -#define RTCL_CLK_INFO(_idx, _name, _pname, _dname) \ - { \ - .idx = _idx, \ - .name = _name, \ - .parent_name = _pname, \ - .display_name = _dname, \ - } - -struct rtcl_clk_info { - unsigned int idx; - const char *name; - const char *parent_name; - const char *display_name; -}; - -struct rtcl_clk { - struct clk_hw hw; - unsigned int idx; - unsigned long min; - unsigned long max; - unsigned long rate; - unsigned long startup; -}; - -static const struct rtcl_clk_info rtcl_clk_info[CLK_COUNT] = { - RTCL_CLK_INFO(CLK_CPU, "cpu_clk", "ref_clk", "CPU"), - RTCL_CLK_INFO(CLK_MEM, "mem_clk", "ref_clk", "MEM"), - RTCL_CLK_INFO(CLK_LXB, "lxb_clk", "ref_clk", "LXB") -}; - -struct rtcl_dram { - int type; - int buswidth; -}; - -struct rtcl_sram { - int *pmark; - unsigned long vbase; -}; - -struct rtcl_ccu { - spinlock_t lock; - unsigned int soc; - struct rtcl_sram sram; - struct rtcl_dram dram; - struct device_node *np; - struct platform_device *pdev; - struct rtcl_clk clks[CLK_COUNT]; -}; - -struct rtcl_ccu *rtcl_ccu; - -#define rtcl_hw_to_clk(_hw) container_of(_hw, struct rtcl_clk, hw) - -/* - * SRAM relocatable assembler functions. The dram() parts point to normal kernel - * memory while the sram() parts are the same functions but relocated to SRAM. - */ - -extern void rtcl_838x_dram_start(void); -extern int rtcl_838x_dram_size; - -extern void (*rtcl_838x_dram_set_rate)(int clk_idx, int ctrl0, int ctrl1); -static void (*rtcl_838x_sram_set_rate)(int clk_idx, int ctrl0, int ctrl1); - -extern void rtcl_839x_dram_start(void); -extern int rtcl_839x_dram_size; - -extern void (*rtcl_839x_dram_set_rate)(int clk_idx, int ctrl0, int ctrl1); -static void (*rtcl_839x_sram_set_rate)(int clk_idx, int ctrl0, int ctrl1); - -/* - * clock setter/getter functions - */ - -static unsigned long rtcl_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -{ - struct rtcl_clk *clk = rtcl_hw_to_clk(hw); - unsigned int ctrl0, ctrl1, div1, div2, cmu_ncode_in; - unsigned int cmu_sel_prediv, cmu_sel_div4, cmu_divn2, cmu_divn2_selb, cmu_divn3_sel; - - if ((clk->idx >= CLK_COUNT) || (!rtcl_ccu) || (rtcl_ccu->soc >= SOC_COUNT)) - return 0; - - ctrl0 = read_sw(rtcl_regs[rtcl_ccu->soc][REG_CTRL0][clk->idx]); - ctrl1 = read_sw(rtcl_regs[rtcl_ccu->soc][REG_CTRL1][clk->idx]); - - cmu_sel_prediv = 1 << RTL_PLL_CTRL0_CMU_SEL_PREDIV(ctrl0); - cmu_sel_div4 = RTL_PLL_CTRL0_CMU_SEL_DIV4(ctrl0) ? 4 : 1; - cmu_ncode_in = RTL_PLL_CTRL0_CMU_NCODE_IN(ctrl0) + 4; - cmu_divn2 = RTL_PLL_CTRL0_CMU_DIVN2(ctrl0) + 4; - - switch (rtcl_ccu->soc) { - case SOC_RTL838X: - if ((ctrl0 == 0) && (ctrl1 == 0) && (clk->idx == CLK_LXB)) - return 200000000; - - cmu_divn2_selb = RTL838X_PLL_CTRL1_CMU_DIVN2_SELB(ctrl1); - cmu_divn3_sel = rtcl_divn3[RTL838X_PLL_CTRL1_CMU_DIVN3_SEL(ctrl1)]; - break; - case SOC_RTL839X: - cmu_divn2_selb = RTL839X_PLL_CTRL1_CMU_DIVN2_SELB(ctrl1); - cmu_divn3_sel = rtcl_divn3[RTL839X_PLL_CTRL1_CMU_DIVN3_SEL(ctrl1)]; - break; - } - div1 = cmu_divn2_selb ? cmu_divn3_sel : cmu_divn2; - div2 = rtcl_xdiv[clk->idx]; - - return (((parent_rate / 16) * cmu_ncode_in) / (div1 * div2)) * - cmu_sel_prediv * cmu_sel_div4 * 16; -} - -static int rtcl_838x_set_rate(int clk_idx, const struct rtcl_reg_set *reg) -{ - unsigned long irqflags; -/* - * Runtime of this function (including locking) - * CPU: up to 14000 cycles / up to 56 us at 250 MHz (half default speed) - */ - spin_lock_irqsave(&rtcl_ccu->lock, irqflags); - rtcl_838x_sram_set_rate(clk_idx, reg->ctrl0, reg->ctrl1); - spin_unlock_irqrestore(&rtcl_ccu->lock, irqflags); - - return 0; -} - -static int rtcl_839x_set_rate(int clk_idx, const struct rtcl_reg_set *reg) -{ - unsigned long vpflags; - unsigned long irqflags; -/* - * Runtime of this function (including locking) - * CPU: up to 31000 cycles / up to 89 us at 350 MHz (half default speed) - */ - spin_lock_irqsave(&rtcl_ccu->lock, irqflags); - vpflags = dvpe(); - rtcl_839x_sram_set_rate(clk_idx, reg->ctrl0, reg->ctrl1); - evpe(vpflags); - spin_unlock_irqrestore(&rtcl_ccu->lock, irqflags); - - return 0; -} - -static int rtcl_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) -{ - int tab_idx; - struct rtcl_clk *clk = rtcl_hw_to_clk(hw); - const struct rtcl_rtab_set *rtab = &rtcl_rtab_set[rtcl_ccu->soc][clk->idx]; - const struct rtcl_round_set *round = &rtcl_round_set[rtcl_ccu->soc][clk->idx]; - - if ((parent_rate != OSC_RATE) || (!rtcl_ccu->sram.vbase)) - return -EINVAL; -/* - * Currently we do not know if SRAM is stable on these devices. Maybe someone - * changes memory in this region and does not care about proper allocation. So - * check if something might go wrong. - */ - if (unlikely(*rtcl_ccu->sram.pmark != RTL_SRAM_MARKER)) { - dev_err(&rtcl_ccu->pdev->dev, "SRAM code lost\n"); - return -EINVAL; - } - - tab_idx = (rate - round->min) / round->step; - if ((tab_idx < 0) || (tab_idx >= rtab->count) || (rtab->rset[tab_idx].rate != rate)) - return -EINVAL; - - rtcl_ccu->clks[clk->idx].rate = rate; - - switch (rtcl_ccu->soc) { - case SOC_RTL838X: - return rtcl_838x_set_rate(clk->idx, &rtab->rset[tab_idx]); - case SOC_RTL839X: - return rtcl_839x_set_rate(clk->idx, &rtab->rset[tab_idx]); - } - - return -ENXIO; -} - -static long rtcl_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) -{ - struct rtcl_clk *clk = rtcl_hw_to_clk(hw); - unsigned long rrate = max(clk->min, min(clk->max, rate)); - const struct rtcl_round_set *round = &rtcl_round_set[rtcl_ccu->soc][clk->idx]; - - rrate = ((rrate + (round->step >> 1)) / round->step) * round->step; - rrate -= (rrate > clk->max) ? round->step : 0; - rrate += (rrate < clk->min) ? round->step : 0; - - return rrate; -} - -/* - * Initialization functions to register the CCU and its clocks - */ - -#define RTCL_SRAM_FUNC(SOC, PBASE, FN) ({ \ - rtcl_##SOC##_sram_##FN = ((void *)&rtcl_##SOC##_dram_##FN - \ - (void *)&rtcl_##SOC##_dram_start) + \ - (void *)PBASE; }) - -static const struct clk_ops rtcl_clk_ops = { - .set_rate = rtcl_set_rate, - .round_rate = rtcl_round_rate, - .recalc_rate = rtcl_recalc_rate, -}; - -static int rtcl_ccu_create(struct device_node *np) -{ - int soc; - - if (of_device_is_compatible(np, "realtek,rtl8380-clock")) - soc = SOC_RTL838X; - else if (of_device_is_compatible(np, "realtek,rtl8390-clock")) - soc = SOC_RTL839X; - else - return -ENXIO; - - rtcl_ccu = kzalloc(sizeof(*rtcl_ccu), GFP_KERNEL); - if (IS_ERR(rtcl_ccu)) - return -ENOMEM; - - rtcl_ccu->np = np; - rtcl_ccu->soc = soc; - rtcl_ccu->dram.type = RTL_MC_MCR_DRAMTYPE(read_soc(RTL_MC_MCR)); - rtcl_ccu->dram.buswidth = RTL_MC_DCR_BUSWIDTH(read_soc(RTL_MC_DCR)); - spin_lock_init(&rtcl_ccu->lock); - - return 0; -} - -int rtcl_register_clkhw(int clk_idx) -{ - int ret; - struct clk *clk; - struct clk_init_data hw_init = { }; - struct rtcl_clk *rclk = &rtcl_ccu->clks[clk_idx]; - struct clk_parent_data parent_data = { .fw_name = rtcl_clk_info[clk_idx].parent_name }; - - rclk->idx = clk_idx; - rclk->hw.init = &hw_init; - - hw_init.num_parents = 1; - hw_init.ops = &rtcl_clk_ops; - hw_init.parent_data = &parent_data; - hw_init.name = rtcl_clk_info[clk_idx].name; - - ret = of_clk_hw_register(rtcl_ccu->np, &rclk->hw); - if (ret) - return ret; - - clk_hw_register_clkdev(&rclk->hw, rtcl_clk_info[clk_idx].name, NULL); - - clk = clk_get(NULL, rtcl_clk_info[clk_idx].name); - rclk->startup = clk_get_rate(clk); - clk_put(clk); - - switch (clk_idx) { - case CLK_CPU: - rclk->min = rtcl_round_set[rtcl_ccu->soc][clk_idx].min; - rclk->max = rtcl_round_set[rtcl_ccu->soc][clk_idx].max; - break; - default: -/* - * TODO: This driver supports PLL reclocking and nothing else. Additional - * required steps for non CPU PLLs are missing. E.g. if we want to change memory - * clocks the right way we must adapt a lot of other settings. This includes - * MCR and DTRx timing registers (0xb80001000, 0xb8001008, ...) and a DLL reset - * so that hardware operates in the allowed limits. This is far too complex - * without official support. Avoid this for now. - */ - rclk->min = rclk->max = rclk->startup; - break; - } - - return 0; -} - -static struct clk_hw *rtcl_get_clkhw(struct of_phandle_args *clkspec, void *prv) -{ - unsigned int idx = clkspec->args[0]; - - if (idx >= CLK_COUNT) { - pr_err("%s: Invalid index %u\n", __func__, idx); - return ERR_PTR(-EINVAL); - } - - return &rtcl_ccu->clks[idx].hw; -} - -static int rtcl_ccu_register_clocks(void) -{ - int clk_idx, ret; - - for (clk_idx = 0; clk_idx < CLK_COUNT; clk_idx++) { - ret = rtcl_register_clkhw(clk_idx); - if (ret) { - pr_err("%s: Couldn't register %s clock\n", - __func__, rtcl_clk_info[clk_idx].display_name); - goto err_hw_unregister; - } - } - - ret = of_clk_add_hw_provider(rtcl_ccu->np, rtcl_get_clkhw, rtcl_ccu); - if (ret) { - pr_err("%s: Couldn't register clock provider of %s\n", - __func__, of_node_full_name(rtcl_ccu->np)); - goto err_hw_unregister; - } - - return 0; - -err_hw_unregister: - for (--clk_idx; clk_idx >= 0; --clk_idx) - clk_hw_unregister(&rtcl_ccu->clks[clk_idx].hw); - - return ret; -} - -int rtcl_init_sram(void) -{ - struct gen_pool *sram_pool; - phys_addr_t sram_pbase; - unsigned long sram_vbase; - struct device_node *node; - struct platform_device *pdev = NULL; - void *dram_start; - int dram_size; - const char *wrn = ", rate setting disabled.\n"; - - switch (rtcl_ccu->soc) { - case SOC_RTL838X: - dram_start = &rtcl_838x_dram_start; - dram_size = rtcl_838x_dram_size; - break; - case SOC_RTL839X: - dram_start = &rtcl_839x_dram_start; - dram_size = rtcl_839x_dram_size; - break; - default: - return -ENXIO; - } - - for_each_compatible_node(node, NULL, "mmio-sram") { - pdev = of_find_device_by_node(node); - if (pdev) { - of_node_put(node); - break; - } - } - - if (!pdev) { - dev_warn(&rtcl_ccu->pdev->dev, "no SRAM device found%s", wrn); - return -ENXIO; - } - - sram_pool = gen_pool_get(&pdev->dev, NULL); - if (!sram_pool) { - dev_warn(&rtcl_ccu->pdev->dev, "SRAM pool unavailable%s", wrn); - goto err_put_device; - } - - sram_vbase = gen_pool_alloc(sram_pool, dram_size); - if (!sram_vbase) { - dev_warn(&rtcl_ccu->pdev->dev, "can not allocate SRAM%s", wrn); - goto err_put_device; - } - - sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_vbase); - memcpy((void *)sram_pbase, dram_start, dram_size); - flush_icache_range((unsigned long)sram_pbase, (unsigned long)(sram_pbase + dram_size)); - - switch (rtcl_ccu->soc) { - case SOC_RTL838X: - RTCL_SRAM_FUNC(838x, sram_pbase, set_rate); - break; - case SOC_RTL839X: - RTCL_SRAM_FUNC(839x, sram_pbase, set_rate); - break; - } - - rtcl_ccu->sram.pmark = (int *)((void *)sram_pbase + (dram_size - 4)); - rtcl_ccu->sram.vbase = sram_vbase; - - return 0; - -err_put_device: - put_device(&pdev->dev); - - return -ENXIO; -} - -void rtcl_ccu_log_early(void) -{ - char meminfo[80], clkinfo[255], msg[255] = "rtl83xx-clk: initialized"; - - sprintf(meminfo, " (%d Bit DDR%d)", rtcl_ccu->dram.buswidth, rtcl_ccu->dram.type); - for (int clk_idx = 0; clk_idx < CLK_COUNT; clk_idx++) { - sprintf(clkinfo, ", %s %lu MHz", rtcl_clk_info[clk_idx].display_name, - rtcl_ccu->clks[clk_idx].startup / 1000000); - if (clk_idx == CLK_MEM) - strcat(clkinfo, meminfo); - strcat(msg, clkinfo); - } - pr_info("%s\n", msg); -} - -void rtcl_ccu_log_late(void) -{ - struct rtcl_clk *rclk; - bool overclock = false; - char clkinfo[80], msg[255] = "rate setting enabled"; - - for (int clk_idx = 0; clk_idx < CLK_COUNT; clk_idx++) { - rclk = &rtcl_ccu->clks[clk_idx]; - overclock |= rclk->max > rclk->startup; - sprintf(clkinfo, ", %s %lu-%lu MHz", rtcl_clk_info[clk_idx].display_name, - rclk->min / 1000000, rclk->max / 1000000); - strcat(msg, clkinfo); - } - if (overclock) - strcat(msg, ", OVERCLOCK AT OWN RISK"); - - dev_info(&rtcl_ccu->pdev->dev, "%s\n", msg); -} - -/* - * Early registration: This module provides core startup clocks that are needed - * for generic SOC init and for further builtin devices (e.g. UART). Register - * asap via clock framework. - */ - -static void __init rtcl_probe_early(struct device_node *np) -{ - if (rtcl_ccu_create(np)) - return; - - if (rtcl_ccu_register_clocks()) - kfree(rtcl_ccu); - else - rtcl_ccu_log_early(); -} - -CLK_OF_DECLARE_DRIVER(rtl838x_clk, "realtek,rtl8380-clock", rtcl_probe_early); -CLK_OF_DECLARE_DRIVER(rtl839x_clk, "realtek,rtl8390-clock", rtcl_probe_early); - -/* - * Late registration: Finally register as normal platform driver. At this point - * we can make use of other modules like SRAM. - */ - -static const struct of_device_id rtcl_dt_ids[] = { - { .compatible = "realtek,rtl8380-clock" }, - { .compatible = "realtek,rtl8390-clock" }, - {} -}; - -static int rtcl_probe_late(struct platform_device *pdev) -{ - int ret; - - if (!rtcl_ccu) { - dev_err(&pdev->dev, "early initialization not run"); - return -ENXIO; - } - rtcl_ccu->pdev = pdev; - ret = rtcl_init_sram(); - if (ret) - return ret; - - rtcl_ccu_log_late(); - - return 0; -} - -static struct platform_driver rtcl_platform_driver = { - .driver = { - .name = "rtl83xx-clk", - .of_match_table = rtcl_dt_ids, - }, - .probe = rtcl_probe_late, -}; - -static int __init rtcl_init_subsys(void) -{ - return platform_driver_register(&rtcl_platform_driver); -} - -/* - * The driver does not know when SRAM module has finally loaded. With an - * arch_initcall() we might overtake SRAM initialization. Be polite and give the - * system a little more time. - */ - -subsys_initcall(rtcl_init_subsys); diff --git a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.h b/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.h deleted file mode 100644 index a69b16b475..0000000000 --- a/target/linux/realtek/files-5.15/drivers/clk/realtek/clk-rtl83xx.h +++ /dev/null @@ -1,75 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Realtek RTL83XX clock headers - * Copyright (C) 2022 Markus Stockhausen - */ - -/* - * Switch registers (e.g. PLL) - */ - -#define RTL_SW_CORE_BASE (0xbb000000) - -#define RTL838X_PLL_GLB_CTRL (0x0fc0) -#define RTL838X_PLL_CPU_CTRL0 (0x0fc4) -#define RTL838X_PLL_CPU_CTRL1 (0x0fc8) -#define RTL838X_PLL_LXB_CTRL0 (0x0fd0) -#define RTL838X_PLL_LXB_CTRL1 (0x0fd4) -#define RTL838X_PLL_MEM_CTRL0 (0x0fdc) -#define RTL838X_PLL_MEM_CTRL1 (0x0fe0) - -#define RTL839X_PLL_GLB_CTRL (0x0024) -#define RTL839X_PLL_CPU_CTRL0 (0x0028) -#define RTL839X_PLL_CPU_CTRL1 (0x002c) -#define RTL839X_PLL_LXB_CTRL0 (0x0038) -#define RTL839X_PLL_LXB_CTRL1 (0x003c) -#define RTL839X_PLL_MEM_CTRL0 (0x0048) -#define RTL839X_PLL_MEM_CTRL1 (0x004c) - -#define RTL_PLL_CTRL0_CMU_SEL_PREDIV(v) (((v) >> 0) & 0x3) -#define RTL_PLL_CTRL0_CMU_SEL_DIV4(v) (((v) >> 2) & 0x1) -#define RTL_PLL_CTRL0_CMU_NCODE_IN(v) (((v) >> 4) & 0xff) -#define RTL_PLL_CTRL0_CMU_DIVN2(v) (((v) >> 12) & 0xff) - -#define RTL838X_GLB_CTRL_EN_CPU_PLL_MASK (1 << 0) -#define RTL838X_GLB_CTRL_EN_LXB_PLL_MASK (1 << 1) -#define RTL838X_GLB_CTRL_EN_MEM_PLL_MASK (1 << 2) -#define RTL838X_GLB_CTRL_CPU_PLL_READY_MASK (1 << 8) -#define RTL838X_GLB_CTRL_LXB_PLL_READY_MASK (1 << 9) -#define RTL838X_GLB_CTRL_MEM_PLL_READY_MASK (1 << 10) -#define RTL838X_GLB_CTRL_CPU_PLL_SC_MUX_MASK (1 << 12) - -#define RTL838X_PLL_CTRL1_CMU_DIVN2_SELB(v) (((v) >> 26) & 0x1) -#define RTL838X_PLL_CTRL1_CMU_DIVN3_SEL(v) (((v) >> 27) & 0x3) - -#define RTL839X_GLB_CTRL_CPU_CLKSEL_MASK (1 << 11) -#define RTL839X_GLB_CTRL_MEM_CLKSEL_MASK (1 << 12) -#define RTL839X_GLB_CTRL_LXB_CLKSEL_MASK (1 << 13) - -#define RTL839X_PLL_CTRL1_CMU_DIVN2_SELB(v) (((v) >> 2) & 0x1) -#define RTL839X_PLL_CTRL1_CMU_DIVN3_SEL(v) (((v) >> 0) & 0x3) - -/* - * Core registers (e.g. memory controller) - */ - -#define RTL_SOC_BASE (0xB8000000) - -#define RTL_MC_MCR (0x1000) -#define RTL_MC_DCR (0x1004) -#define RTL_MC_DTR0 (0x1008) -#define RTL_MC_DTR1 (0x100c) -#define RTL_MC_DTR2 (0x1010) -#define RTL_MC_DMCR (0x101c) -#define RTL_MC_DACCR (0x1500) -#define RTL_MC_DCDR (0x1060) - -#define RTL_MC_MCR_DRAMTYPE(v) ((((v) >> 28) & 0xf) + 1) -#define RTL_MC_DCR_BUSWIDTH(v) (8 << (((v) >> 24) & 0xf)) - -/* - * Other stuff - */ - -#define RTL_SRAM_MARKER (0x5eaf00d5) -#define RTL_SRAM_BASE (0x9f000000) diff --git a/target/linux/realtek/files-5.15/drivers/clocksource/timer-rtl-otto.c b/target/linux/realtek/files-5.15/drivers/clocksource/timer-rtl-otto.c deleted file mode 100644 index 086f62112a..0000000000 --- a/target/linux/realtek/files-5.15/drivers/clocksource/timer-rtl-otto.c +++ /dev/null @@ -1,286 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#include -#include -#include -#include -#include -#include - -#include "timer-of.h" - -#define RTTM_DATA 0x0 -#define RTTM_CNT 0x4 -#define RTTM_CTRL 0x8 -#define RTTM_INT 0xc - -#define RTTM_CTRL_ENABLE BIT(28) -#define RTTM_INT_PENDING BIT(16) -#define RTTM_INT_ENABLE BIT(20) - -/* - * The Otto platform provides multiple 28 bit timers/counters with the following - * operating logic. If enabled the timer counts up. Per timer one can set a - * maximum counter value as an end marker. If end marker is reached the timer - * fires an interrupt. If the timer "overflows" by reaching the end marker or - * by adding 1 to 0x0fffffff the counter is reset to 0. When this happens and - * the timer is in operating mode COUNTER it stops. In mode TIMER it will - * continue to count up. - */ -#define RTTM_CTRL_COUNTER 0 -#define RTTM_CTRL_TIMER BIT(24) - -#define RTTM_BIT_COUNT 28 -#define RTTM_MIN_DELTA 8 -#define RTTM_MAX_DELTA CLOCKSOURCE_MASK(28) - -/* - * Timers are derived from the LXB clock frequency. Usually this is a fixed - * multiple of the 25 MHz oscillator. The 930X SOC is an exception from that. - * Its LXB clock has only dividers and uses the switch PLL of 2.45 GHz as its - * base. The only meaningful frequencies we can achieve from that are 175.000 - * MHz and 153.125 MHz. The greatest common divisor of all explained possible - * speeds is 3125000. Pin the timers to this 3.125 MHz reference frequency. - */ -#define RTTM_TICKS_PER_SEC 3125000 - -struct rttm_cs { - struct timer_of to; - struct clocksource cs; -}; - -/* Simple internal register functions */ -static inline void rttm_set_counter(void __iomem *base, unsigned int counter) -{ - iowrite32(counter, base + RTTM_CNT); -} - -static inline unsigned int rttm_get_counter(void __iomem *base) -{ - return ioread32(base + RTTM_CNT); -} - -static inline void rttm_set_period(void __iomem *base, unsigned int period) -{ - iowrite32(period, base + RTTM_DATA); -} - -static inline void rttm_disable_timer(void __iomem *base) -{ - iowrite32(0, base + RTTM_CTRL); -} - -static inline void rttm_enable_timer(void __iomem *base, u32 mode, u32 divisor) -{ - iowrite32(RTTM_CTRL_ENABLE | mode | divisor, base + RTTM_CTRL); -} - -static inline void rttm_ack_irq(void __iomem *base) -{ - iowrite32(ioread32(base + RTTM_INT) | RTTM_INT_PENDING, base + RTTM_INT); -} - -static inline void rttm_enable_irq(void __iomem *base) -{ - iowrite32(RTTM_INT_ENABLE, base + RTTM_INT); -} - -static inline void rttm_disable_irq(void __iomem *base) -{ - iowrite32(0, base + RTTM_INT); -} - -/* Aggregated control functions for kernel clock framework */ -#define RTTM_DEBUG(base) \ - pr_debug("------------- %s %d %08x\n", __func__, \ - smp_processor_id(), (u32)base) - -static irqreturn_t rttm_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *clkevt = dev_id; - struct timer_of *to = to_timer_of(clkevt); - - rttm_ack_irq(to->of_base.base); - RTTM_DEBUG(to->of_base.base); - clkevt->event_handler(clkevt); - - return IRQ_HANDLED; -} - -static void rttm_stop_timer(void __iomem *base) -{ - rttm_disable_timer(base); - rttm_ack_irq(base); -} - -static void rttm_start_timer(struct timer_of *to, u32 mode) -{ - rttm_set_counter(to->of_base.base, 0); - rttm_enable_timer(to->of_base.base, mode, to->of_clk.rate / RTTM_TICKS_PER_SEC); -} - -static int rttm_next_event(unsigned long delta, struct clock_event_device *clkevt) -{ - struct timer_of *to = to_timer_of(clkevt); - - RTTM_DEBUG(to->of_base.base); - rttm_stop_timer(to->of_base.base); - rttm_set_period(to->of_base.base, delta); - rttm_start_timer(to, RTTM_CTRL_COUNTER); - - return 0; -} - -static int rttm_state_oneshot(struct clock_event_device *clkevt) -{ - struct timer_of *to = to_timer_of(clkevt); - - RTTM_DEBUG(to->of_base.base); - rttm_stop_timer(to->of_base.base); - rttm_set_period(to->of_base.base, RTTM_TICKS_PER_SEC / HZ); - rttm_start_timer(to, RTTM_CTRL_COUNTER); - - return 0; -} - -static int rttm_state_periodic(struct clock_event_device *clkevt) -{ - struct timer_of *to = to_timer_of(clkevt); - - RTTM_DEBUG(to->of_base.base); - rttm_stop_timer(to->of_base.base); - rttm_set_period(to->of_base.base, RTTM_TICKS_PER_SEC / HZ); - rttm_start_timer(to, RTTM_CTRL_TIMER); - - return 0; -} - -static int rttm_state_shutdown(struct clock_event_device *clkevt) -{ - struct timer_of *to = to_timer_of(clkevt); - - RTTM_DEBUG(to->of_base.base); - rttm_stop_timer(to->of_base.base); - - return 0; -} - -static void rttm_setup_timer(void __iomem *base) -{ - RTTM_DEBUG(base); - rttm_stop_timer(base); - rttm_set_period(base, 0); -} - -static u64 rttm_read_clocksource(struct clocksource *cs) -{ - struct rttm_cs *rcs = container_of(cs, struct rttm_cs, cs); - - return (u64)rttm_get_counter(rcs->to.of_base.base); -} - -/* Module initialization part. */ -static DEFINE_PER_CPU(struct timer_of, rttm_to) = { - .flags = TIMER_OF_BASE | TIMER_OF_CLOCK | TIMER_OF_IRQ, - .of_irq = { - .flags = IRQF_PERCPU | IRQF_TIMER, - .handler = rttm_timer_interrupt, - }, - .clkevt = { - .rating = 400, - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_state_periodic = rttm_state_periodic, - .set_state_shutdown = rttm_state_shutdown, - .set_state_oneshot = rttm_state_oneshot, - .set_next_event = rttm_next_event - }, -}; - -static int rttm_enable_clocksource(struct clocksource *cs) -{ - struct rttm_cs *rcs = container_of(cs, struct rttm_cs, cs); - - rttm_disable_irq(rcs->to.of_base.base); - rttm_setup_timer(rcs->to.of_base.base); - rttm_enable_timer(rcs->to.of_base.base, RTTM_CTRL_TIMER, - rcs->to.of_clk.rate / RTTM_TICKS_PER_SEC); - - return 0; -} - -struct rttm_cs rttm_cs = { - .to = { - .flags = TIMER_OF_BASE | TIMER_OF_CLOCK, - }, - .cs = { - .name = "realtek_otto_timer", - .rating = 400, - .mask = CLOCKSOURCE_MASK(RTTM_BIT_COUNT), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .read = rttm_read_clocksource, - } -}; - -static u64 notrace rttm_read_clock(void) -{ - return (u64)rttm_get_counter(rttm_cs.to.of_base.base); -} - -static int rttm_cpu_starting(unsigned int cpu) -{ - struct timer_of *to = per_cpu_ptr(&rttm_to, cpu); - - RTTM_DEBUG(to->of_base.base); - to->clkevt.cpumask = cpumask_of(cpu); - irq_force_affinity(to->of_irq.irq, to->clkevt.cpumask); - clockevents_config_and_register(&to->clkevt, RTTM_TICKS_PER_SEC, - RTTM_MIN_DELTA, RTTM_MAX_DELTA); - rttm_enable_irq(to->of_base.base); - - return 0; -} - -static int __init rttm_probe(struct device_node *np) -{ - int cpu, cpu_rollback; - struct timer_of *to; - int clkidx = num_possible_cpus(); - - /* Use the first n timers as per CPU clock event generators */ - for_each_possible_cpu(cpu) { - to = per_cpu_ptr(&rttm_to, cpu); - to->of_irq.index = to->of_base.index = cpu; - if (timer_of_init(np, to)) { - pr_err("%s: setup of timer %d failed\n", __func__, cpu); - goto rollback; - } - rttm_setup_timer(to->of_base.base); - } - - /* Activate the n'th + 1 timer as a stable CPU clocksource. */ - to = &rttm_cs.to; - to->of_base.index = clkidx; - timer_of_init(np, to); - if (rttm_cs.to.of_base.base && rttm_cs.to.of_clk.rate) { - rttm_enable_clocksource(&rttm_cs.cs); - clocksource_register_hz(&rttm_cs.cs, RTTM_TICKS_PER_SEC); - sched_clock_register(rttm_read_clock, RTTM_BIT_COUNT, RTTM_TICKS_PER_SEC); - } else - pr_err("%s: setup of timer %d as clocksoure failed", __func__, clkidx); - - return cpuhp_setup_state(CPUHP_AP_REALTEK_TIMER_STARTING, - "timer/realtek:online", - rttm_cpu_starting, NULL); -rollback: - pr_err("%s: timer registration failed\n", __func__); - for_each_possible_cpu(cpu_rollback) { - if (cpu_rollback == cpu) - break; - to = per_cpu_ptr(&rttm_to, cpu_rollback); - timer_of_cleanup(to); - } - - return -EINVAL; -} - -TIMER_OF_DECLARE(otto_timer, "realtek,otto-timer", rttm_probe); diff --git a/target/linux/realtek/files-5.15/drivers/gpio/gpio-rtl8231.c b/target/linux/realtek/files-5.15/drivers/gpio/gpio-rtl8231.c deleted file mode 100644 index 2821591a97..0000000000 --- a/target/linux/realtek/files-5.15/drivers/gpio/gpio-rtl8231.c +++ /dev/null @@ -1,364 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include -#include -#include - -/* RTL8231 registers for LED control */ -#define RTL8231_LED_FUNC0 0x0000 -#define RTL8231_LED_FUNC1 0x0001 -#define RTL8231_READY_MASK 0x03f0 -#define RTL8231_READY_VALUE 0x0370 -#define RTL8231_GPIO_PIN_SEL(gpio) ((0x0002) + ((gpio) >> 4)) -#define RTL8231_GPIO_DIR(gpio) ((0x0005) + ((gpio) >> 4)) -#define RTL8231_GPIO_DATA(gpio) ((0x001C) + ((gpio) >> 4)) - -#define USEC_TIMEOUT 5000 - -#define RTL8231_SMI_BUS_ID_MAX 0x1F - -struct rtl8231_gpios { - struct gpio_chip gc; - struct device *dev; - u32 id; - u32 smi_bus_id; - u16 reg_shadow[0x20]; - u32 reg_cached; - int ext_gpio_indrt_access; -}; - -extern struct rtl83xx_soc_info soc_info; - -DEFINE_MUTEX(miim_lock); - -static u32 rtl8231_read(struct rtl8231_gpios *gpios, u32 reg) -{ - u32 t = 0, n = 0; - - reg &= 0x1f; - - /* Calculate read register address */ - t = (gpios->smi_bus_id << 2) | (reg << 7); - - /* Set execution bit: cleared when operation completed */ - t |= 1; - - /* Start execution */ - sw_w32(t, gpios->ext_gpio_indrt_access); - do { - udelay(1); - t = sw_r32(gpios->ext_gpio_indrt_access); - n++; - } while ((t & 1) && (n < USEC_TIMEOUT)); - - if (n >= USEC_TIMEOUT) - return 0x80000000; - - pr_debug("%s: %x, %x, %x\n", __func__, gpios->smi_bus_id, - reg, (t & 0xffff0000) >> 16); - - return (t & 0xffff0000) >> 16; -} - -static int rtl8231_write(struct rtl8231_gpios *gpios, u32 reg, u32 data) -{ - u32 t = 0, n = 0; - - pr_debug("%s: %x, %x, %x\n", __func__, gpios->smi_bus_id, reg, data); - reg &= 0x1f; - - t = (gpios->smi_bus_id << 2) | (reg << 7) | (data << 16); - /* Set write bit */ - t |= 2; - - /* Set execution bit: cleared when operation completed */ - t |= 1; - - /* Start execution */ - sw_w32(t, gpios->ext_gpio_indrt_access); - do { - udelay(1); - t = sw_r32(gpios->ext_gpio_indrt_access); - } while ((t & 1) && (n < USEC_TIMEOUT)); - - if (n >= USEC_TIMEOUT) - return -1; - - return 0; -} - -static u32 rtl8231_read_cached(struct rtl8231_gpios *gpios, u32 reg) -{ - if (reg > 0x1f) - return 0; - - if (gpios->reg_cached & (1 << reg)) - return gpios->reg_shadow[reg]; - - return rtl8231_read(gpios, reg); -} - -/* Set Direction of the RTL8231 pin: - * dir 1: input - * dir 0: output - */ -static int rtl8231_pin_dir(struct rtl8231_gpios *gpios, u32 gpio, u32 dir) -{ - u32 v; - int pin_sel_addr = RTL8231_GPIO_PIN_SEL(gpio); - int pin_dir_addr = RTL8231_GPIO_DIR(gpio); - int dpin = gpio % 16; - - if (gpio > 31) { - pr_debug("WARNING: HIGH pin\n"); - dpin += 5; - pin_dir_addr = pin_sel_addr; - } - - v = rtl8231_read_cached(gpios, pin_dir_addr); - if (v & 0x80000000) { - pr_err("Error reading RTL8231\n"); - return -1; - } - - v = (v & ~(1 << dpin)) | (dir << dpin); - rtl8231_write(gpios, pin_dir_addr, v); - gpios->reg_shadow[pin_dir_addr] = v; - gpios->reg_cached |= 1 << pin_dir_addr; - - return 0; -} - -static int rtl8231_pin_dir_get(struct rtl8231_gpios *gpios, u32 gpio, u32 *dir) -{ - /* dir 1: input - * dir 0: output - */ - - u32 v; - int pin_dir_addr = RTL8231_GPIO_DIR(gpio); - int pin = gpio % 16; - - if (gpio > 31) { - pin_dir_addr = RTL8231_GPIO_PIN_SEL(gpio); - pin += 5; - } - - v = rtl8231_read(gpios, pin_dir_addr); - if (v & (1 << pin)) - *dir = 1; - else - *dir = 0; - - return 0; -} - -static int rtl8231_pin_set(struct rtl8231_gpios *gpios, u32 gpio, u32 data) -{ - u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio)); - - pr_debug("%s: %d to %d\n", __func__, gpio, data); - if (v & 0x80000000) { - pr_err("Error reading RTL8231\n"); - return -1; - } - v = (v & ~(1 << (gpio % 16))) | (data << (gpio % 16)); - rtl8231_write(gpios, RTL8231_GPIO_DATA(gpio), v); - gpios->reg_shadow[RTL8231_GPIO_DATA(gpio)] = v; - gpios->reg_cached |= 1 << RTL8231_GPIO_DATA(gpio); - - return 0; -} - -static int rtl8231_pin_get(struct rtl8231_gpios *gpios, u32 gpio, u16 *state) -{ - u32 v = rtl8231_read(gpios, RTL8231_GPIO_DATA(gpio)); - - if (v & 0x80000000) { - pr_err("Error reading RTL8231\n"); - return -1; - } - - *state = v & 0xffff; - - return 0; -} - -static int rtl8231_direction_input(struct gpio_chip *gc, unsigned int offset) -{ - int err; - struct rtl8231_gpios *gpios = gpiochip_get_data(gc); - - pr_debug("%s: %d\n", __func__, offset); - mutex_lock(&miim_lock); - err = rtl8231_pin_dir(gpios, offset, 1); - mutex_unlock(&miim_lock); - - return err; -} - -static int rtl8231_direction_output(struct gpio_chip *gc, unsigned int offset, int value) -{ - int err; - struct rtl8231_gpios *gpios = gpiochip_get_data(gc); - - pr_debug("%s: %d\n", __func__, offset); - mutex_lock(&miim_lock); - err = rtl8231_pin_dir(gpios, offset, 0); - mutex_unlock(&miim_lock); - - if (!err) - err = rtl8231_pin_set(gpios, offset, value); - - return err; -} - -static int rtl8231_get_direction(struct gpio_chip *gc, unsigned int offset) -{ - u32 v = 0; - struct rtl8231_gpios *gpios = gpiochip_get_data(gc); - - pr_debug("%s: %d\n", __func__, offset); - mutex_lock(&miim_lock); - rtl8231_pin_dir_get(gpios, offset, &v); - mutex_unlock(&miim_lock); - - return v; -} - -static int rtl8231_gpio_get(struct gpio_chip *gc, unsigned int offset) -{ - u16 state = 0; - struct rtl8231_gpios *gpios = gpiochip_get_data(gc); - - mutex_lock(&miim_lock); - rtl8231_pin_get(gpios, offset, &state); - mutex_unlock(&miim_lock); - - if (state & (1 << (offset % 16))) - return 1; - - return 0; -} - -void rtl8231_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) -{ - struct rtl8231_gpios *gpios = gpiochip_get_data(gc); - - rtl8231_pin_set(gpios, offset, value); -} - -int rtl8231_init(struct rtl8231_gpios *gpios) -{ - u32 ret; - - pr_info("%s called, MDIO bus ID: %d\n", __func__, gpios->smi_bus_id); - - gpios->reg_cached = 0; - - if (soc_info.family == RTL8390_FAMILY_ID) { - /* RTL8390: Enable external gpio in global led control register */ - sw_w32_mask(0x7 << 18, 0x4 << 18, RTL839X_LED_GLB_CTRL); - } else if (soc_info.family == RTL8380_FAMILY_ID) { - /* RTL8380: Enable RTL8231 indirect access mode */ - sw_w32_mask(0, 1, RTL838X_EXTRA_GPIO_CTRL); - sw_w32_mask(3, 1, RTL838X_DMY_REG5); - } - - ret = rtl8231_read(gpios, RTL8231_LED_FUNC1); - if ((ret & 0x80000000) || ((ret & RTL8231_READY_MASK) != RTL8231_READY_VALUE)) - return -ENXIO; - - /* Select GPIO functionality and force input direction for pins 0-36 */ - rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(0), 0xffff); - rtl8231_write(gpios, RTL8231_GPIO_DIR(0), 0xffff); - rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(16), 0xffff); - rtl8231_write(gpios, RTL8231_GPIO_DIR(16), 0xffff); - rtl8231_write(gpios, RTL8231_GPIO_PIN_SEL(32), 0x03ff); - - /* Set LED_Start to enable drivers for output mode */ - rtl8231_write(gpios, RTL8231_LED_FUNC0, 1 << 1); - - return 0; -} - -static const struct of_device_id rtl8231_gpio_of_match[] = { - { .compatible = "realtek,rtl8231-gpio" }, - {}, -}; - -MODULE_DEVICE_TABLE(of, rtl8231_gpio_of_match); - -static int rtl8231_gpio_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct rtl8231_gpios *gpios; - int err; - - pr_info("Probing RTL8231 GPIOs\n"); - - if (!np) { - dev_err(&pdev->dev, "No DT found\n"); - return -EINVAL; - } - - gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL); - if (!gpios) - return -ENOMEM; - - gpios->id = soc_info.id; - if (soc_info.family == RTL8380_FAMILY_ID) { - gpios->ext_gpio_indrt_access = RTL838X_EXT_GPIO_INDRT_ACCESS; - } - - if (soc_info.family == RTL8390_FAMILY_ID) { - gpios->ext_gpio_indrt_access = RTL839X_EXT_GPIO_INDRT_ACCESS; - } - - err = of_property_read_u32(np, "indirect-access-bus-id", &gpios->smi_bus_id); - if (!err && gpios->smi_bus_id > RTL8231_SMI_BUS_ID_MAX) - err = -EINVAL; - - if (err) { - dev_err(dev, "invalid or missing indirect-access-bus-id\n"); - return err; - } - - err = rtl8231_init(gpios); - if (err) { - dev_err(dev, "no device found at bus address %d\n", gpios->smi_bus_id); - return err; - } - - gpios->dev = dev; - gpios->gc.base = -1; - gpios->gc.ngpio = 37; - gpios->gc.label = "rtl8231"; - gpios->gc.parent = dev; - gpios->gc.owner = THIS_MODULE; - gpios->gc.can_sleep = true; - - gpios->gc.direction_input = rtl8231_direction_input; - gpios->gc.direction_output = rtl8231_direction_output; - gpios->gc.set = rtl8231_gpio_set; - gpios->gc.get = rtl8231_gpio_get; - gpios->gc.get_direction = rtl8231_get_direction; - - return devm_gpiochip_add_data(dev, &gpios->gc, gpios); -} - -static struct platform_driver rtl8231_gpio_driver = { - .driver = { - .name = "rtl8231-gpio", - .of_match_table = rtl8231_gpio_of_match, - }, - .probe = rtl8231_gpio_probe, -}; - -module_platform_driver(rtl8231_gpio_driver); - -MODULE_DESCRIPTION("Realtek RTL8231 GPIO expansion chip support"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c b/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c deleted file mode 100644 index 54d916d17a..0000000000 --- a/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.c +++ /dev/null @@ -1,486 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include "i2c-rtl9300.h" - -#define REG(i, x) (i->base + x + (i->scl_num ? i->mst2_offset : 0)) -#define REG_MASK(i, clear, set, reg) \ - writel((readl(REG(i, reg)) & ~(clear)) | (set), REG(i, reg)) - -struct i2c_drv_data { - int scl0_pin; - int scl1_pin; - int sda0_pin; - struct i2c_algorithm *algo; - int (*read)(struct rtl9300_i2c *i2c, u8 *buf, int len); - int (*write)(struct rtl9300_i2c *i2c, u8 *buf, int len); - void (*reg_addr_set)(struct rtl9300_i2c *i2c, u32 reg, u16 len); - int (*config_xfer)(struct rtl9300_i2c *i2c, u16 addr, u16 len); - int (*execute_xfer)(struct rtl9300_i2c *i2c, char read_write, int size, - union i2c_smbus_data * data, int len); - void (*writel)(struct rtl9300_i2c *i2c, u32 data); - void (*config_io)(struct rtl9300_i2c *i2c, int scl_num, int sda_num); - u32 mst2_offset; -}; - -DEFINE_MUTEX(i2c_lock); - -static void rtl9300_i2c_reg_addr_set(struct rtl9300_i2c *i2c, u32 reg, u16 len) -{ - /* Set register address width */ - REG_MASK(i2c, 0x3 << RTL9300_I2C_CTRL2_MADDR_WIDTH, len << RTL9300_I2C_CTRL2_MADDR_WIDTH, - RTL9300_I2C_CTRL2); - - /* Set register address */ - REG_MASK(i2c, 0xffffff << RTL9300_I2C_CTRL1_MEM_ADDR, reg << RTL9300_I2C_CTRL1_MEM_ADDR, - RTL9300_I2C_CTRL1); -} - -static void rtl9310_i2c_reg_addr_set(struct rtl9300_i2c *i2c, u32 reg, u16 len) -{ - /* Set register address width */ - REG_MASK(i2c, 0x3 << RTL9310_I2C_CTRL_MADDR_WIDTH, len << RTL9310_I2C_CTRL_MADDR_WIDTH, - RTL9310_I2C_CTRL); - - /* Set register address */ - writel(reg, REG(i2c, RTL9310_I2C_MEMADDR)); -} - -static void rtl9300_i2c_config_io(struct rtl9300_i2c *i2c, int scl_num, int sda_num) -{ - u32 v; - - /* Set SCL pin */ - REG_MASK(i2c, 0, BIT(RTL9300_I2C_CTRL1_GPIO8_SCL_SEL), RTL9300_I2C_CTRL1); - - /* Set SDA pin */ - REG_MASK(i2c, 0x7 << RTL9300_I2C_CTRL1_SDA_OUT_SEL, - i2c->sda_num << RTL9300_I2C_CTRL1_SDA_OUT_SEL, RTL9300_I2C_CTRL1); - - /* Set SDA pin to I2C functionality */ - v = readl(i2c->base + RTL9300_I2C_MST_GLB_CTRL); - v |= BIT(i2c->sda_num); - writel(v, i2c->base + RTL9300_I2C_MST_GLB_CTRL); -} - -static void rtl9310_i2c_config_io(struct rtl9300_i2c *i2c, int scl_num, int sda_num) -{ - u32 v; - - /* Set SCL pin */ - REG_MASK(i2c, 0, BIT(RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL + scl_num), RTL9310_I2C_MST_IF_SEL); - - /* Set SDA pin */ - REG_MASK(i2c, 0x7 << RTL9310_I2C_CTRL_SDA_OUT_SEL, - i2c->sda_num << RTL9310_I2C_CTRL_SDA_OUT_SEL, RTL9310_I2C_CTRL); - - /* Set SDA pin to I2C functionality */ - v = readl(i2c->base + RTL9310_I2C_MST_IF_SEL); - v |= BIT(i2c->sda_num); - writel(v, i2c->base + RTL9310_I2C_MST_IF_SEL); -} - -static int rtl9300_i2c_config_xfer(struct rtl9300_i2c *i2c, u16 addr, u16 len) -{ - /* Set bus frequency */ - REG_MASK(i2c, 0x3 << RTL9300_I2C_CTRL2_SCL_FREQ, - i2c->bus_freq << RTL9300_I2C_CTRL2_SCL_FREQ, RTL9300_I2C_CTRL2); - - /* Set slave device address */ - REG_MASK(i2c, 0x7f << RTL9300_I2C_CTRL2_DEV_ADDR, - addr << RTL9300_I2C_CTRL2_DEV_ADDR, RTL9300_I2C_CTRL2); - - /* Set data length */ - REG_MASK(i2c, 0xf << RTL9300_I2C_CTRL2_DATA_WIDTH, - ((len - 1) & 0xf) << RTL9300_I2C_CTRL2_DATA_WIDTH, RTL9300_I2C_CTRL2); - - /* Set read mode to random */ - REG_MASK(i2c, 0x1 << RTL9300_I2C_CTRL2_READ_MODE, 0, RTL9300_I2C_CTRL2); - - return 0; -} - -static int rtl9310_i2c_config_xfer(struct rtl9300_i2c *i2c, u16 addr, u16 len) -{ - /* Set bus frequency */ - REG_MASK(i2c, 0x3 << RTL9310_I2C_CTRL_SCL_FREQ, - i2c->bus_freq << RTL9310_I2C_CTRL_SCL_FREQ, RTL9310_I2C_CTRL); - - /* Set slave device address */ - REG_MASK(i2c, 0x7f << RTL9310_I2C_CTRL_DEV_ADDR, - addr << RTL9310_I2C_CTRL_DEV_ADDR, RTL9310_I2C_CTRL); - - /* Set data length */ - REG_MASK(i2c, 0xf << RTL9310_I2C_CTRL_DATA_WIDTH, - ((len - 1) & 0xf) << RTL9310_I2C_CTRL_DATA_WIDTH, RTL9310_I2C_CTRL); - - /* Set read mode to random */ - REG_MASK(i2c, 0x1 << RTL9310_I2C_CTRL_READ_MODE, 0, RTL9310_I2C_CTRL); - - return 0; -} - -static int i2c_read(void __iomem *r0, u8 *buf, int len) -{ - if (len > 16) - return -EIO; - - for (int i = 0; i < len; i++) { - u32 v; - - if (i % 4 == 0) - v = readl(r0 + i); - buf[i] = v; - v >>= 8; - } - - return len; -} - -static int i2c_write(void __iomem *r0, u8 *buf, int len) -{ - if (len > 16) - return -EIO; - - for (int i = 0; i < len; i++) { - u32 v; - - if (! (i % 4)) - v = 0; - v <<= 8; - v |= buf[i]; - if (i % 4 == 3 || i == len - 1) - writel(v, r0 + (i / 4) * 4); - } - - return len; -} - -static int rtl9300_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, int len) -{ - return i2c_read(REG(i2c, RTL9300_I2C_DATA_WORD0), buf, len); -} - -static int rtl9300_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, int len) -{ - return i2c_write(REG(i2c, RTL9300_I2C_DATA_WORD0), buf, len); -} - -static int rtl9310_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, int len) -{ - return i2c_read(REG(i2c, RTL9310_I2C_DATA), buf, len); -} - -static int rtl9310_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, int len) -{ - return i2c_write(REG(i2c, RTL9310_I2C_DATA), buf, len); -} - -static void rtl9300_writel(struct rtl9300_i2c *i2c, u32 data) -{ - writel(data, REG(i2c, RTL9300_I2C_DATA_WORD0)); -} - -static void rtl9310_writel(struct rtl9300_i2c *i2c, u32 data) -{ - writel(data, REG(i2c, RTL9310_I2C_DATA)); -} - - -static int rtl9300_execute_xfer(struct rtl9300_i2c *i2c, char read_write, - int size, union i2c_smbus_data * data, int len) -{ - u32 v; - - if (read_write == I2C_SMBUS_READ) - REG_MASK(i2c, BIT(RTL9300_I2C_CTRL1_RWOP), 0, RTL9300_I2C_CTRL1); - else - REG_MASK(i2c, 0, BIT(RTL9300_I2C_CTRL1_RWOP), RTL9300_I2C_CTRL1); - - REG_MASK(i2c, 0, BIT(RTL9300_I2C_CTRL1_I2C_TRIG), RTL9300_I2C_CTRL1); - do { - v = readl(REG(i2c, RTL9300_I2C_CTRL1)); - } while (v & BIT(RTL9300_I2C_CTRL1_I2C_TRIG)); - - if (v & BIT(RTL9300_I2C_CTRL1_I2C_FAIL)) - return -EIO; - - if (read_write == I2C_SMBUS_READ) { - if (size == I2C_SMBUS_BYTE || size == I2C_SMBUS_BYTE_DATA){ - data->byte = readl(REG(i2c, RTL9300_I2C_DATA_WORD0)); - } else if (size == I2C_SMBUS_WORD_DATA) { - data->word = readl(REG(i2c, RTL9300_I2C_DATA_WORD0)); - } else if (len > 0) { - rtl9300_i2c_read(i2c, &data->block[0], len); - } - } - - return 0; -} - -static int rtl9310_execute_xfer(struct rtl9300_i2c *i2c, char read_write, - int size, union i2c_smbus_data * data, int len) -{ - u32 v; - - if (read_write == I2C_SMBUS_READ) - REG_MASK(i2c, BIT(RTL9310_I2C_CTRL_RWOP), 0, RTL9310_I2C_CTRL); - else - REG_MASK(i2c, 0, BIT(RTL9310_I2C_CTRL_RWOP), RTL9310_I2C_CTRL); - - REG_MASK(i2c, 0, BIT(RTL9310_I2C_CTRL_I2C_TRIG), RTL9310_I2C_CTRL); - do { - v = readl(REG(i2c, RTL9310_I2C_CTRL)); - } while (v & BIT(RTL9310_I2C_CTRL_I2C_TRIG)); - - if (v & BIT(RTL9310_I2C_CTRL_I2C_FAIL)) - return -EIO; - - if (read_write == I2C_SMBUS_READ) { - if (size == I2C_SMBUS_BYTE || size == I2C_SMBUS_BYTE_DATA){ - data->byte = readl(REG(i2c, RTL9310_I2C_DATA)); - } else if (size == I2C_SMBUS_WORD_DATA) { - data->word = readl(REG(i2c, RTL9310_I2C_DATA)); - } else if (len > 0) { - rtl9310_i2c_read(i2c, &data->block[0], len); - } - } - - return 0; -} - -static int rtl9300_i2c_smbus_xfer(struct i2c_adapter * adap, u16 addr, - unsigned short flags, char read_write, - u8 command, int size, union i2c_smbus_data * data) -{ - struct rtl9300_i2c *i2c = i2c_get_adapdata(adap); - struct i2c_drv_data *drv_data = (struct i2c_drv_data *)device_get_match_data(i2c->dev); - int len = 0, ret; - - mutex_lock(&i2c_lock); - switch (size) { - case I2C_SMBUS_QUICK: - drv_data->config_xfer(i2c, addr, 0); - drv_data->reg_addr_set(i2c, 0, 0); - break; - - case I2C_SMBUS_BYTE: - if (read_write == I2C_SMBUS_WRITE) { - drv_data->config_xfer(i2c, addr, 0); - drv_data->reg_addr_set(i2c, command, 1); - } else { - drv_data->config_xfer(i2c, addr, 1); - drv_data->reg_addr_set(i2c, 0, 0); - } - break; - - case I2C_SMBUS_BYTE_DATA: - pr_debug("I2C_SMBUS_BYTE_DATA %02x, read %d cmd %02x\n", addr, read_write, command); - drv_data->reg_addr_set(i2c, command, 1); - drv_data->config_xfer(i2c, addr, 1); - - if (read_write == I2C_SMBUS_WRITE) { - pr_debug("--> data %02x\n", data->byte); - drv_data->writel(i2c, data->byte); - } - break; - - case I2C_SMBUS_WORD_DATA: - pr_debug("I2C_SMBUS_WORD %02x, read %d\n", addr, read_write); - drv_data->reg_addr_set(i2c, command, 1); - drv_data->config_xfer(i2c, addr, 2); - if (read_write == I2C_SMBUS_WRITE) - drv_data->writel(i2c, data->word); - break; - - case I2C_SMBUS_BLOCK_DATA: - pr_debug("I2C_SMBUS_BLOCK_DATA %02x, read %d, len %d\n", - addr, read_write, data->block[0]); - drv_data->reg_addr_set(i2c, command, 1); - drv_data->config_xfer(i2c, addr, data->block[0]); - if (read_write == I2C_SMBUS_WRITE) - drv_data->write(i2c, &data->block[1], data->block[0]); - len = data->block[0]; - break; - - default: - dev_warn(&adap->dev, "Unsupported transaction %d\n", size); - return -EOPNOTSUPP; - } - - ret = drv_data->execute_xfer(i2c, read_write, size, data, len); - - mutex_unlock(&i2c_lock); - - return ret; -} - -static u32 rtl9300_i2c_func(struct i2c_adapter *a) -{ - return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA; -} - -static const struct i2c_algorithm rtl9300_i2c_algo = { - .smbus_xfer = rtl9300_i2c_smbus_xfer, - .functionality = rtl9300_i2c_func, -}; - -struct i2c_adapter_quirks rtl9300_i2c_quirks = { - .flags = I2C_AQ_NO_CLK_STRETCH, - .max_read_len = 16, - .max_write_len = 16, -}; - -static int rtl9300_i2c_probe(struct platform_device *pdev) -{ - struct resource *res; - struct rtl9300_i2c *i2c; - struct i2c_adapter *adap; - struct i2c_drv_data *drv_data; - struct device_node *node = pdev->dev.of_node; - u32 clock_freq, pin; - int ret = 0; - - pr_info("%s probing I2C adapter\n", __func__); - - if (!node) { - dev_err(i2c->dev, "No DT found\n"); - return -EINVAL; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - drv_data = (struct i2c_drv_data *) device_get_match_data(&pdev->dev); - - i2c = devm_kzalloc(&pdev->dev, sizeof(struct rtl9300_i2c), GFP_KERNEL); - if (!i2c) - return -ENOMEM; - - i2c->base = devm_ioremap_resource(&pdev->dev, res); - i2c->mst2_offset = drv_data->mst2_offset; - if (IS_ERR(i2c->base)) - return PTR_ERR(i2c->base); - - pr_debug("%s base memory %08x\n", __func__, (u32)i2c->base); - i2c->dev = &pdev->dev; - - if (of_property_read_u32(node, "clock-frequency", &clock_freq)) { - clock_freq = I2C_MAX_STANDARD_MODE_FREQ; - } - switch(clock_freq) { - case I2C_MAX_STANDARD_MODE_FREQ: - i2c->bus_freq = RTL9300_I2C_STD_FREQ; - break; - - case I2C_MAX_FAST_MODE_FREQ: - i2c->bus_freq = RTL9300_I2C_FAST_FREQ; - break; - default: - dev_warn(i2c->dev, "clock-frequency %d not supported\n", clock_freq); - return -EINVAL; - } - - dev_info(&pdev->dev, "SCL speed %d, mode is %d\n", clock_freq, i2c->bus_freq); - - if (of_property_read_u32(node, "scl-pin", &pin)) { - dev_warn(i2c->dev, "SCL pin not found in DT, using default\n"); - pin = drv_data->scl0_pin; - } - if (!(pin == drv_data->scl0_pin || pin == drv_data->scl1_pin)) { - dev_warn(i2c->dev, "SCL pin %d not supported\n", pin); - return -EINVAL; - } - i2c->scl_num = pin == drv_data->scl0_pin ? 0 : 1; - pr_info("%s scl_num %d\n", __func__, i2c->scl_num); - - if (of_property_read_u32(node, "sda-pin", &pin)) { - dev_warn(i2c->dev, "SDA pin not found in DT, using default \n"); - pin = drv_data->sda0_pin; - } - i2c->sda_num = pin - drv_data->sda0_pin; - if (i2c->sda_num < 0 || i2c->sda_num > 7) { - dev_warn(i2c->dev, "SDA pin %d not supported\n", pin); - return -EINVAL; - } - pr_info("%s sda_num %d\n", __func__, i2c->sda_num); - - adap = &i2c->adap; - adap->owner = THIS_MODULE; - adap->algo = &rtl9300_i2c_algo; - adap->retries = 3; - adap->dev.parent = &pdev->dev; - i2c_set_adapdata(adap, i2c); - adap->dev.of_node = node; - strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); - - platform_set_drvdata(pdev, i2c); - - drv_data->config_io(i2c, i2c->scl_num, i2c->sda_num); - - ret = i2c_add_adapter(adap); - - return ret; -} - -static int rtl9300_i2c_remove(struct platform_device *pdev) -{ - struct rtl9300_i2c *i2c = platform_get_drvdata(pdev); - - i2c_del_adapter(&i2c->adap); - - return 0; -} - -struct i2c_drv_data rtl9300_i2c_drv_data = { - .scl0_pin = 8, - .scl1_pin = 17, - .sda0_pin = 9, - .read = rtl9300_i2c_read, - .read = rtl9300_i2c_write, - .reg_addr_set = rtl9300_i2c_reg_addr_set, - .config_xfer = rtl9300_i2c_config_xfer, - .execute_xfer = rtl9300_execute_xfer, - .writel = rtl9300_writel, - .config_io = rtl9300_i2c_config_io, - .mst2_offset = 0x1c, -}; - -struct i2c_drv_data rtl9310_i2c_drv_data = { - .scl0_pin = 13, - .scl1_pin = 14, - .sda0_pin = 0, - .read = rtl9310_i2c_read, - .read = rtl9310_i2c_write, - .reg_addr_set = rtl9310_i2c_reg_addr_set, - .config_xfer = rtl9310_i2c_config_xfer, - .execute_xfer = rtl9310_execute_xfer, - .writel = rtl9310_writel, - .config_io = rtl9310_i2c_config_io, - .mst2_offset = 0x18, -}; - -static const struct of_device_id i2c_rtl9300_dt_ids[] = { - { .compatible = "realtek,rtl9300-i2c", .data = (void *) &rtl9300_i2c_drv_data }, - { .compatible = "realtek,rtl9310-i2c", .data = (void *) &rtl9310_i2c_drv_data }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, rtl838x_eth_of_ids); - -static struct platform_driver rtl9300_i2c_driver = { - .probe = rtl9300_i2c_probe, - .remove = rtl9300_i2c_remove, - .driver = { - .name = "i2c-rtl9300", - .pm = NULL, - .of_match_table = i2c_rtl9300_dt_ids, - }, -}; - -module_platform_driver(rtl9300_i2c_driver); - -MODULE_AUTHOR("Birger Koblitz"); -MODULE_DESCRIPTION("RTL9300 I2C host driver"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.h b/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.h deleted file mode 100644 index 617a1b6632..0000000000 --- a/target/linux/realtek/files-5.15/drivers/i2c/busses/i2c-rtl9300.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef I2C_RTL9300_H -#define I2C_RTL9300_H - -#include - -#define RTL9300_I2C_CTRL1 0x00 -#define RTL9300_I2C_CTRL1_MEM_ADDR 8 -#define RTL9300_I2C_CTRL1_SDA_OUT_SEL 4 -#define RTL9300_I2C_CTRL1_GPIO8_SCL_SEL 3 -#define RTL9300_I2C_CTRL1_RWOP 2 -#define RTL9300_I2C_CTRL1_I2C_FAIL 1 -#define RTL9300_I2C_CTRL1_I2C_TRIG 0 - -#define RTL9300_I2C_CTRL2 0x04 -#define RTL9300_I2C_CTRL2_DRIVE_ACK_DELAY 20 -#define RTL9300_I2C_CTRL2_CHECK_ACK_DELAY 16 -#define RTL9300_I2C_CTRL2_READ_MODE 15 -#define RTL9300_I2C_CTRL2_DEV_ADDR 8 -#define RTL9300_I2C_CTRL2_DATA_WIDTH 4 -#define RTL9300_I2C_CTRL2_MADDR_WIDTH 2 -#define RTL9300_I2C_CTRL2_SCL_FREQ 0 - -#define RTL9300_I2C_DATA_WORD0 0x08 - -#define RTL9300_I2C_MST_GLB_CTRL 0x18 - -#define RTL9310_I2C_MST_IF_CTRL 0x00 - -#define RTL9310_I2C_MST_IF_SEL 0x04 -#define RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL 12 - -#define RTL9310_I2C_CTRL 0x08 -#define RTL9310_I2C_CTRL_SCL_FREQ 30 -#define RTL9310_I2C_CTRL_CHECK_ACK_DELAY 26 -#define RTL9310_I2C_CTRL_DRIVE_ACK_DELAY 22 -#define RTL9310_I2C_CTRL_SDA_OUT_SEL 18 -#define RTL9310_I2C_CTRL_DEV_ADDR 11 -#define RTL9310_I2C_CTRL_MADDR_WIDTH 9 -#define RTL9310_I2C_CTRL_DATA_WIDTH 5 -#define RTL9310_I2C_CTRL_READ_MODE 4 -#define RTL9310_I2C_CTRL_RWOP 2 -#define RTL9310_I2C_CTRL_I2C_FAIL 1 -#define RTL9310_I2C_CTRL_I2C_TRIG 0 - -#define RTL9310_I2C_MEMADDR 0x0c - -#define RTL9310_I2C_DATA 0x10 - -#define RTL9300_I2C_STD_FREQ 0 -#define RTL9300_I2C_FAST_FREQ 1 - -struct rtl9300_i2c { - void __iomem *base; - u32 mst2_offset; - struct device *dev; - struct i2c_adapter adap; - u8 bus_freq; - u8 sda_num; /* SDA channel number */ - u8 scl_num; /* SCL channel, mapping to master 1 or 2 */ -}; - -#endif diff --git a/target/linux/realtek/files-5.15/drivers/i2c/muxes/i2c-mux-rtl9300.c b/target/linux/realtek/files-5.15/drivers/i2c/muxes/i2c-mux-rtl9300.c deleted file mode 100644 index 57036d9d56..0000000000 --- a/target/linux/realtek/files-5.15/drivers/i2c/muxes/i2c-mux-rtl9300.c +++ /dev/null @@ -1,293 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * I2C multiplexer for the 2 I2C Masters of the RTL9300 - * with up to 8 channels each, but which are not entirely - * independent of each other - */ -#include -#include -#include -#include -#include -#include - -#include "../busses/i2c-rtl9300.h" - -#define NUM_MASTERS 2 -#define NUM_BUSSES 8 - -#define REG(mst, x) (mux->base + x + (mst ? mux->i2c->mst2_offset : 0)) -#define REG_MASK(mst, clear, set, reg) \ - writel((readl(REG((mst),(reg))) & ~(clear)) | (set), REG((mst),(reg))) - -struct channel { - u8 sda_num; - u8 scl_num; -}; - -static struct channel channels[NUM_MASTERS * NUM_BUSSES]; - -struct rtl9300_mux { - void __iomem *base; - struct device *dev; - struct i2c_adapter *parent; - struct rtl9300_i2c * i2c; -}; - -struct i2c_mux_data { - int scl0_pin; - int scl1_pin; - int sda0_pin; - int sda_pins; - int (*i2c_mux_select)(struct i2c_mux_core *muxc, u32 chan); - int (*i2c_mux_deselect)(struct i2c_mux_core *muxc, u32 chan); - void (*sda_sel)(struct i2c_mux_core *muxc, int pin); -}; - -static int rtl9300_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan) -{ - struct rtl9300_mux *mux = i2c_mux_priv(muxc); - - /* Set SCL pin */ - REG_MASK(channels[chan].scl_num, 0, - BIT(RTL9300_I2C_CTRL1_GPIO8_SCL_SEL), RTL9300_I2C_CTRL1); - - /* Set SDA pin */ - REG_MASK(channels[chan].scl_num, 0x7 << RTL9300_I2C_CTRL1_SDA_OUT_SEL, - channels[chan].sda_num << RTL9300_I2C_CTRL1_SDA_OUT_SEL, RTL9300_I2C_CTRL1); - - mux->i2c->sda_num = channels[chan].sda_num; - mux->i2c->scl_num = channels[chan].scl_num; - - return 0; -} - -static int rtl9310_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan) -{ - struct rtl9300_mux *mux = i2c_mux_priv(muxc); - - /* Set SCL pin */ - REG_MASK(0, 0, BIT(RTL9310_I2C_MST_IF_SEL_GPIO_SCL_SEL + channels[chan].scl_num), - RTL9310_I2C_MST_IF_SEL); - - /* Set SDA pin */ - REG_MASK(channels[chan].scl_num, 0xf << RTL9310_I2C_CTRL_SDA_OUT_SEL, - channels[chan].sda_num << RTL9310_I2C_CTRL_SDA_OUT_SEL, RTL9310_I2C_CTRL); - - mux->i2c->sda_num = channels[chan].sda_num; - mux->i2c->scl_num = channels[chan].scl_num; - - return 0; -} - -static int rtl9300_i2c_mux_deselect(struct i2c_mux_core *muxc, u32 chan) -{ - return 0; -} - -static void rtl9300_sda_sel(struct i2c_mux_core *muxc, int pin) -{ - struct rtl9300_mux *mux = i2c_mux_priv(muxc); - u32 v; - - /* Set SDA pin to I2C functionality */ - v = readl(REG(0, RTL9300_I2C_MST_GLB_CTRL)); - v |= BIT(pin); - writel(v, REG(0, RTL9300_I2C_MST_GLB_CTRL)); -} - -static void rtl9310_sda_sel(struct i2c_mux_core *muxc, int pin) -{ - struct rtl9300_mux *mux = i2c_mux_priv(muxc); - u32 v; - - /* Set SDA pin to I2C functionality */ - v = readl(REG(0, RTL9310_I2C_MST_IF_SEL)); - v |= BIT(pin); - writel(v, REG(0, RTL9310_I2C_MST_IF_SEL)); -} - -static struct device_node *mux_parent_adapter(struct device *dev, struct rtl9300_mux *mux) -{ - struct device_node *node = dev->of_node; - struct device_node *parent_np; - struct i2c_adapter *parent; - - parent_np = of_parse_phandle(node, "i2c-parent", 0); - if (!parent_np) { - dev_err(dev, "Cannot parse i2c-parent\n"); - return ERR_PTR(-ENODEV); - } - parent = of_find_i2c_adapter_by_node(parent_np); - of_node_put(parent_np); - if (!parent) - return ERR_PTR(-EPROBE_DEFER); - - if (!(of_device_is_compatible(parent_np, "realtek,rtl9300-i2c") || - of_device_is_compatible(parent_np, "realtek,rtl9310-i2c"))){ - dev_err(dev, "I2C parent not an RTL9300 I2C controller\n"); - return ERR_PTR(-ENODEV); - } - - mux->parent = parent; - mux->i2c = (struct rtl9300_i2c *)i2c_get_adapdata(parent); - mux->base = mux->i2c->base; - - return parent_np; -} - -struct i2c_mux_data rtl9300_i2c_mux_data = { - .scl0_pin = 8, - .scl1_pin = 17, - .sda0_pin = 9, - .sda_pins = 8, - .i2c_mux_select = rtl9300_i2c_mux_select, - .i2c_mux_deselect = rtl9300_i2c_mux_deselect, - .sda_sel = rtl9300_sda_sel, -}; - -struct i2c_mux_data rtl9310_i2c_mux_data = { - .scl0_pin = 13, - .scl1_pin = 14, - .sda0_pin = 0, - .sda_pins = 16, - .i2c_mux_select = rtl9310_i2c_mux_select, - .i2c_mux_deselect = rtl9300_i2c_mux_deselect, - .sda_sel = rtl9310_sda_sel, -}; - -static const struct of_device_id rtl9300_i2c_mux_of_match[] = { - { .compatible = "realtek,i2c-mux-rtl9300", .data = (void *) &rtl9300_i2c_mux_data}, - { .compatible = "realtek,i2c-mux-rtl9310", .data = (void *) &rtl9310_i2c_mux_data}, - {}, -}; - -MODULE_DEVICE_TABLE(of, rtl9300_i2c_mux_of_match); - -static int rtl9300_i2c_mux_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *node = dev->of_node; - struct device_node *parent_np; - struct device_node *child; - struct i2c_mux_core *muxc; - struct rtl9300_mux *mux; - struct i2c_mux_data *mux_data; - int children; - int ret; - - pr_info("%s probing I2C adapter\n", __func__); - - if (!node) { - dev_err(dev, "No DT found\n"); - return -EINVAL; - } - - mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); - if (!mux) - return -ENOMEM; - - mux->dev = dev; - - mux_data = (struct i2c_mux_data *) device_get_match_data(dev); - - parent_np = mux_parent_adapter(dev, mux); - if (IS_ERR(parent_np)) - return dev_err_probe(dev, PTR_ERR(parent_np), "i2c-parent adapter not found\n"); - - pr_info("%s base memory %08x\n", __func__, (u32)mux->base); - - children = of_get_child_count(node); - - muxc = i2c_mux_alloc(mux->parent, dev, children, 0, 0, - mux_data->i2c_mux_select, mux_data->i2c_mux_deselect); - if (!muxc) { - ret = -ENOMEM; - goto err_parent; - } - muxc->priv = mux; - - platform_set_drvdata(pdev, muxc); - - for_each_child_of_node(node, child) { - u32 chan; - u32 pin; - - ret = of_property_read_u32(child, "reg", &chan); - if (ret < 0) { - dev_err(dev, "no reg property for node '%pOFn'\n", - child); - goto err_children; - } - - if (chan >= NUM_MASTERS * NUM_BUSSES) { - dev_err(dev, "invalid reg %u\n", chan); - ret = -EINVAL; - goto err_children; - } - - if (of_property_read_u32(child, "scl-pin", &pin)) { - dev_warn(dev, "SCL pin not found in DT, using default\n"); - pin = mux_data->scl0_pin; - } - if (!(pin == mux_data->scl0_pin || pin == mux_data->scl1_pin)) { - dev_warn(dev, "SCL pin %d not supported\n", pin); - ret = -EINVAL; - goto err_children; - } - channels[chan].scl_num = pin == mux_data->scl0_pin ? 0 : 1; - pr_info("%s channel %d scl_num %d\n", __func__, chan, channels[chan].scl_num); - - if (of_property_read_u32(child, "sda-pin", &pin)) { - dev_warn(dev, "SDA pin not found in DT, using default \n"); - pin = mux_data->sda0_pin; - } - channels[chan].sda_num = pin - mux_data->sda0_pin; - if (channels[chan].sda_num < 0 || channels[chan].sda_num >= mux_data->sda_pins) { - dev_warn(dev, "SDA pin %d not supported\n", pin); - return -EINVAL; - } - pr_info("%s channel %d sda_num %d\n", __func__, chan, channels[chan].sda_num); - - mux_data->sda_sel(muxc, channels[chan].sda_num); - - ret = i2c_mux_add_adapter(muxc, 0, chan, 0); - if (ret) - goto err_children; - } - - dev_info(dev, "%d-port mux on %s adapter\n", children, mux->parent->name); - - return 0; - -err_children: - i2c_mux_del_adapters(muxc); -err_parent: - i2c_put_adapter(mux->parent); - - return ret; -} - -static int rtl9300_i2c_mux_remove(struct platform_device *pdev) -{ - struct i2c_mux_core *muxc = platform_get_drvdata(pdev); - - i2c_mux_del_adapters(muxc); - i2c_put_adapter(muxc->parent); - - return 0; -} - -static struct platform_driver i2c_mux_driver = { - .probe = rtl9300_i2c_mux_probe, - .remove = rtl9300_i2c_mux_remove, - .driver = { - .name = "i2c-mux-rtl9300", - .of_match_table = rtl9300_i2c_mux_of_match, - }, -}; -module_platform_driver(i2c_mux_driver); - -MODULE_DESCRIPTION("RTL9300 I2C multiplexer driver"); -MODULE_AUTHOR("Birger Koblitz"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Kconfig b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Kconfig deleted file mode 100644 index 3124ee8d20..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config NET_DSA_RTL83XX - tristate "Realtek RTL838x/RTL839x switch support" - depends on RTL83XX - select NET_DSA_TAG_TRAILER - help - This driver adds support for Realtek RTL83xx series switching. diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Makefile b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Makefile deleted file mode 100644 index 8752c79700..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_NET_DSA_RTL83XX) += common.o dsa.o \ - rtl838x.o rtl839x.o rtl930x.o rtl931x.o debugfs.o qos.o tc.o diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c deleted file mode 100644 index 7ce5f0146e..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/common.c +++ /dev/null @@ -1,1714 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "rtl83xx.h" - -extern struct rtl83xx_soc_info soc_info; - -extern const struct rtl838x_reg rtl838x_reg; -extern const struct rtl838x_reg rtl839x_reg; -extern const struct rtl838x_reg rtl930x_reg; -extern const struct rtl838x_reg rtl931x_reg; - -extern const struct dsa_switch_ops rtl83xx_switch_ops; -extern const struct dsa_switch_ops rtl930x_switch_ops; - -DEFINE_MUTEX(smi_lock); - -int rtl83xx_port_get_stp_state(struct rtl838x_switch_priv *priv, int port) -{ - u32 msti = 0; - u32 port_state[4]; - int index, bit; - int pos = port; - int n = priv->port_width << 1; - - /* Ports above or equal CPU port can never be configured */ - if (port >= priv->cpu_port) - return -1; - - mutex_lock(&priv->reg_mutex); - - /* For the RTL839x and following, the bits are left-aligned in the 64/128 bit field */ - if (priv->family_id == RTL8390_FAMILY_ID) - pos += 12; - if (priv->family_id == RTL9300_FAMILY_ID) - pos += 3; - if (priv->family_id == RTL9310_FAMILY_ID) - pos += 8; - - index = n - (pos >> 4) - 1; - bit = (pos << 1) % 32; - - priv->r->stp_get(priv, msti, port_state); - - mutex_unlock(&priv->reg_mutex); - - return (port_state[index] >> bit) & 3; -} - -static struct table_reg rtl838x_tbl_regs[] = { - TBL_DESC(0x6900, 0x6908, 3, 15, 13, 1), /* RTL8380_TBL_L2 */ - TBL_DESC(0x6914, 0x6918, 18, 14, 12, 1), /* RTL8380_TBL_0 */ - TBL_DESC(0xA4C8, 0xA4CC, 6, 14, 12, 1), /* RTL8380_TBL_1 */ - - TBL_DESC(0x1180, 0x1184, 3, 16, 14, 0), /* RTL8390_TBL_L2 */ - TBL_DESC(0x1190, 0x1194, 17, 15, 12, 0), /* RTL8390_TBL_0 */ - TBL_DESC(0x6B80, 0x6B84, 4, 14, 12, 0), /* RTL8390_TBL_1 */ - TBL_DESC(0x611C, 0x6120, 9, 8, 6, 0), /* RTL8390_TBL_2 */ - - TBL_DESC(0xB320, 0xB334, 3, 18, 16, 0), /* RTL9300_TBL_L2 */ - TBL_DESC(0xB340, 0xB344, 19, 16, 12, 0), /* RTL9300_TBL_0 */ - TBL_DESC(0xB3A0, 0xB3A4, 20, 16, 13, 0), /* RTL9300_TBL_1 */ - TBL_DESC(0xCE04, 0xCE08, 6, 14, 12, 0), /* RTL9300_TBL_2 */ - TBL_DESC(0xD600, 0xD604, 30, 7, 6, 0), /* RTL9300_TBL_HSB */ - TBL_DESC(0x7880, 0x7884, 22, 9, 8, 0), /* RTL9300_TBL_HSA */ - - TBL_DESC(0x8500, 0x8508, 8, 19, 15, 0), /* RTL9310_TBL_0 */ - TBL_DESC(0x40C0, 0x40C4, 22, 16, 14, 0), /* RTL9310_TBL_1 */ - TBL_DESC(0x8528, 0x852C, 6, 18, 14, 0), /* RTL9310_TBL_2 */ - TBL_DESC(0x0200, 0x0204, 9, 15, 12, 0), /* RTL9310_TBL_3 */ - TBL_DESC(0x20dc, 0x20e0, 29, 7, 6, 0), /* RTL9310_TBL_4 */ - TBL_DESC(0x7e1c, 0x7e20, 53, 8, 6, 0), /* RTL9310_TBL_5 */ -}; - -void rtl_table_init(void) -{ - for (int i = 0; i < RTL_TBL_END; i++) - mutex_init(&rtl838x_tbl_regs[i].lock); -} - -/* Request access to table t in table access register r - * Returns a handle to a lock for that table - */ -struct table_reg *rtl_table_get(rtl838x_tbl_reg_t r, int t) -{ - if (r >= RTL_TBL_END) - return NULL; - - if (t >= BIT(rtl838x_tbl_regs[r].c_bit-rtl838x_tbl_regs[r].t_bit)) - return NULL; - - mutex_lock(&rtl838x_tbl_regs[r].lock); - rtl838x_tbl_regs[r].tbl = t; - - return &rtl838x_tbl_regs[r]; -} - -/* Release a table r, unlock the corresponding lock */ -void rtl_table_release(struct table_reg *r) -{ - if (!r) - return; - -/* pr_info("Unlocking %08x\n", (u32)r); */ - mutex_unlock(&r->lock); -/* pr_info("Unlock done\n"); */ -} - -static int rtl_table_exec(struct table_reg *r, bool is_write, int idx) -{ - int ret = 0; - u32 cmd, val; - - /* Read/write bit has inverted meaning on RTL838x */ - if (r->rmode) - cmd = is_write ? 0 : BIT(r->c_bit); - else - cmd = is_write ? BIT(r->c_bit) : 0; - - cmd |= BIT(r->c_bit + 1); /* Execute bit */ - cmd |= r->tbl << r->t_bit; /* Table type */ - cmd |= idx & (BIT(r->t_bit) - 1); /* Index */ - - sw_w32(cmd, r->addr); - - ret = readx_poll_timeout(sw_r32, r->addr, val, - !(val & BIT(r->c_bit + 1)), 20, 10000); - if (ret) - pr_err("%s: timeout\n", __func__); - - return ret; -} - -/* Reads table index idx into the data registers of the table */ -int rtl_table_read(struct table_reg *r, int idx) -{ - return rtl_table_exec(r, false, idx); -} - -/* Writes the content of the table data registers into the table at index idx */ -int rtl_table_write(struct table_reg *r, int idx) -{ - return rtl_table_exec(r, true, idx); -} - -/* Returns the address of the ith data register of table register r - * the address is relative to the beginning of the Switch-IO block at 0xbb000000 - */ -inline u16 rtl_table_data(struct table_reg *r, int i) -{ - if (i >= r->max_data) - i = r->max_data - 1; - return r->data + i * 4; -} - -inline u32 rtl_table_data_r(struct table_reg *r, int i) -{ - return sw_r32(rtl_table_data(r, i)); -} - -inline void rtl_table_data_w(struct table_reg *r, u32 v, int i) -{ - sw_w32(v, rtl_table_data(r, i)); -} - -/* Port register accessor functions for the RTL838x and RTL930X SoCs */ -void rtl838x_mask_port_reg(u64 clear, u64 set, int reg) -{ - sw_w32_mask((u32)clear, (u32)set, reg); -} - -void rtl838x_set_port_reg(u64 set, int reg) -{ - sw_w32((u32)set, reg); -} - -u64 rtl838x_get_port_reg(int reg) -{ - return ((u64)sw_r32(reg)); -} - -/* Port register accessor functions for the RTL839x and RTL931X SoCs */ -void rtl839x_mask_port_reg_be(u64 clear, u64 set, int reg) -{ - sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg); - sw_w32_mask((u32)(clear & 0xffffffff), (u32)(set & 0xffffffff), reg + 4); -} - -u64 rtl839x_get_port_reg_be(int reg) -{ - u64 v = sw_r32(reg); - - v <<= 32; - v |= sw_r32(reg + 4); - - return v; -} - -void rtl839x_set_port_reg_be(u64 set, int reg) -{ - sw_w32(set >> 32, reg); - sw_w32(set & 0xffffffff, reg + 4); -} - -void rtl839x_mask_port_reg_le(u64 clear, u64 set, int reg) -{ - sw_w32_mask((u32)clear, (u32)set, reg); - sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg + 4); -} - -void rtl839x_set_port_reg_le(u64 set, int reg) -{ - sw_w32(set, reg); - sw_w32(set >> 32, reg + 4); -} - -u64 rtl839x_get_port_reg_le(int reg) -{ - u64 v = sw_r32(reg + 4); - - v <<= 32; - v |= sw_r32(reg); - - return v; -} - -int read_phy(u32 port, u32 page, u32 reg, u32 *val) -{ - switch (soc_info.family) { - case RTL8380_FAMILY_ID: - return rtl838x_read_phy(port, page, reg, val); - case RTL8390_FAMILY_ID: - return rtl839x_read_phy(port, page, reg, val); - case RTL9300_FAMILY_ID: - return rtl930x_read_phy(port, page, reg, val); - case RTL9310_FAMILY_ID: - return rtl931x_read_phy(port, page, reg, val); - } - - return -1; -} - -int write_phy(u32 port, u32 page, u32 reg, u32 val) -{ - switch (soc_info.family) { - case RTL8380_FAMILY_ID: - return rtl838x_write_phy(port, page, reg, val); - case RTL8390_FAMILY_ID: - return rtl839x_write_phy(port, page, reg, val); - case RTL9300_FAMILY_ID: - return rtl930x_write_phy(port, page, reg, val); - case RTL9310_FAMILY_ID: - return rtl931x_write_phy(port, page, reg, val); - } - - return -1; -} - -static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv) -{ - struct device *dev = priv->dev; - struct device_node *dn, *phy_node, *led_node, *mii_np = dev->of_node; - struct mii_bus *bus; - int ret; - u32 pn; - - pr_debug("In %s\n", __func__); - mii_np = of_find_compatible_node(NULL, NULL, "realtek,rtl838x-mdio"); - if (mii_np) { - pr_debug("Found compatible MDIO node!\n"); - } else { - dev_err(priv->dev, "no %s child node found", "mdio-bus"); - return -ENODEV; - } - - priv->mii_bus = of_mdio_find_bus(mii_np); - if (!priv->mii_bus) { - pr_debug("Deferring probe of mdio bus\n"); - return -EPROBE_DEFER; - } - if (!of_device_is_available(mii_np)) - ret = -ENODEV; - - bus = devm_mdiobus_alloc(priv->ds->dev); - if (!bus) - return -ENOMEM; - - bus->name = "rtl838x slave mii"; - - /* Since the NIC driver is loaded first, we can use the mdio rw functions - * assigned there. - */ - bus->read = priv->mii_bus->read; - bus->write = priv->mii_bus->write; - snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", bus->name, dev->id); - - bus->parent = dev; - priv->ds->slave_mii_bus = bus; - priv->ds->slave_mii_bus->priv = priv->mii_bus->priv; - - ret = mdiobus_register(priv->ds->slave_mii_bus); - if (ret && mii_np) { - of_node_put(dn); - return ret; - } - - dn = of_find_compatible_node(NULL, NULL, "realtek,rtl83xx-switch"); - if (!dn) { - dev_err(priv->dev, "No RTL switch node in DTS\n"); - return -ENODEV; - } - - led_node = of_find_compatible_node(NULL, NULL, "realtek,rtl9300-leds"); - - for_each_node_by_name(dn, "port") { - phy_interface_t interface; - u32 led_set; - char led_set_str[16] = {0}; - - if (!of_device_is_available(dn)) - continue; - - if (of_property_read_u32(dn, "reg", &pn)) - continue; - - phy_node = of_parse_phandle(dn, "phy-handle", 0); - if (!phy_node) { - if (pn != priv->cpu_port) - dev_err(priv->dev, "Port node %d misses phy-handle\n", pn); - continue; - } - - if (of_property_read_u32(phy_node, "sds", &priv->ports[pn].sds_num)) - priv->ports[pn].sds_num = -1; - pr_debug("%s port %d has SDS %d\n", __func__, pn, priv->ports[pn].sds_num); - - if (of_get_phy_mode(dn, &interface)) - interface = PHY_INTERFACE_MODE_NA; - if (interface == PHY_INTERFACE_MODE_HSGMII) - priv->ports[pn].is2G5 = true; - if (interface == PHY_INTERFACE_MODE_USXGMII) - priv->ports[pn].is2G5 = priv->ports[pn].is10G = true; - if (interface == PHY_INTERFACE_MODE_10GBASER) - priv->ports[pn].is10G = true; - - priv->ports[pn].leds_on_this_port = 0; - if (led_node) { - if (of_property_read_u32(dn, "led-set", &led_set)) - led_set = 0; - priv->ports[pn].led_set = led_set; - sprintf(led_set_str, "led_set%d", led_set); - priv->ports[pn].leds_on_this_port = of_property_count_u32_elems(led_node, led_set_str); - if (priv->ports[pn].leds_on_this_port > 4) { - dev_err(priv->dev, "led_set %d for port %d configuration is invalid\n", led_set, pn); - return -ENODEV; - } - } - - /* Check for the integrated SerDes of the RTL8380M first */ - if (of_property_read_bool(phy_node, "phy-is-integrated") - && priv->id == 0x8380 && pn >= 24) { - pr_debug("----> FÓUND A SERDES\n"); - priv->ports[pn].phy = PHY_RTL838X_SDS; - continue; - } - - if (priv->id >= 0x9300) { - priv->ports[pn].phy_is_integrated = false; - if (of_property_read_bool(phy_node, "phy-is-integrated")) { - priv->ports[pn].phy_is_integrated = true; - priv->ports[pn].phy = PHY_RTL930X_SDS; - } - } else { - if (of_property_read_bool(phy_node, "phy-is-integrated") && - !of_property_read_bool(phy_node, "sfp")) { - priv->ports[pn].phy = PHY_RTL8218B_INT; - continue; - } - } - - if (!of_property_read_bool(phy_node, "phy-is-integrated") && - of_property_read_bool(phy_node, "sfp")) { - priv->ports[pn].phy = PHY_RTL8214FC; - continue; - } - - if (!of_property_read_bool(phy_node, "phy-is-integrated") && - !of_property_read_bool(phy_node, "sfp")) { - priv->ports[pn].phy = PHY_RTL8218B_EXT; - continue; - } - } - - /* Disable MAC polling the PHY so that we can start configuration */ - priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl); - - /* Enable PHY control via SoC */ - if (priv->family_id == RTL8380_FAMILY_ID) { - /* Enable SerDes NWAY and PHY control via SoC */ - sw_w32_mask(BIT(7), BIT(15), RTL838X_SMI_GLB_CTRL); - } else if (priv->family_id == RTL8390_FAMILY_ID) { - /* Disable PHY polling via SoC */ - sw_w32_mask(BIT(7), 0, RTL839X_SMI_GLB_CTRL); - } - - /* Power on fibre ports and reset them if necessary */ - if (priv->ports[24].phy == PHY_RTL838X_SDS) { - pr_debug("Powering on fibre ports & reset\n"); - rtl8380_sds_power(24, 1); - rtl8380_sds_power(26, 1); - } - - pr_debug("%s done\n", __func__); - - return 0; -} - -static int __init rtl83xx_get_l2aging(struct rtl838x_switch_priv *priv) -{ - int t = sw_r32(priv->r->l2_ctrl_1); - - t &= priv->family_id == RTL8380_FAMILY_ID ? 0x7fffff : 0x1FFFFF; - - if (priv->family_id == RTL8380_FAMILY_ID) - t = t * 128 / 625; /* Aging time in seconds. 0: L2 aging disabled */ - else - t = (t * 3) / 5; - - pr_debug("L2 AGING time: %d sec\n", t); - pr_debug("Dynamic aging for ports: %x\n", sw_r32(priv->r->l2_port_aging_out)); - - return t; -} - -/* Caller must hold priv->reg_mutex */ -int rtl83xx_lag_add(struct dsa_switch *ds, int group, int port, struct netdev_lag_upper_info *info) -{ - struct rtl838x_switch_priv *priv = ds->priv; - int i; - u32 algomsk = 0; - u32 algoidx = 0; - - if (info->tx_type != NETDEV_LAG_TX_TYPE_HASH) { - pr_err("%s: Only mode LACP 802.3ad (4) allowed.\n", __func__); - return -EINVAL; - } - - if (group >= priv->n_lags) { - pr_err("%s: LAG %d invalid.\n", __func__, group); - return -EINVAL; - } - - if (port >= priv->cpu_port) { - pr_err("%s: Port %d invalid.\n", __func__, port); - return -EINVAL; - } - - for (i = 0; i < priv->n_lags; i++) { - if (priv->lags_port_members[i] & BIT_ULL(port)) - break; - } - if (i != priv->n_lags) { - pr_err("%s: Port %d already member of LAG %d.\n", __func__, port, i); - return -ENOSPC; - } - - switch(info->hash_type) { - case NETDEV_LAG_HASH_L2: - algomsk |= TRUNK_DISTRIBUTION_ALGO_DMAC_BIT; - algomsk |= TRUNK_DISTRIBUTION_ALGO_SMAC_BIT; - break; - case NETDEV_LAG_HASH_L23: - algomsk |= TRUNK_DISTRIBUTION_ALGO_DMAC_BIT; - algomsk |= TRUNK_DISTRIBUTION_ALGO_SMAC_BIT; - algomsk |= TRUNK_DISTRIBUTION_ALGO_SIP_BIT; /* source ip */ - algomsk |= TRUNK_DISTRIBUTION_ALGO_DIP_BIT; /* dest ip */ - algoidx = 1; - break; - case NETDEV_LAG_HASH_L34: - algomsk |= TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT; /* sport */ - algomsk |= TRUNK_DISTRIBUTION_ALGO_DST_L4PORT_BIT; /* dport */ - algomsk |= TRUNK_DISTRIBUTION_ALGO_SIP_BIT; /* source ip */ - algomsk |= TRUNK_DISTRIBUTION_ALGO_DIP_BIT; /* dest ip */ - algoidx = 2; - break; - default: - algomsk |= 0x7f; - } - priv->r->set_distribution_algorithm(group, algoidx, algomsk); - priv->r->mask_port_reg_be(0, BIT_ULL(port), priv->r->trk_mbr_ctr(group)); - priv->lags_port_members[group] |= BIT_ULL(port); - - pr_info("%s: Added port %d to LAG %d. Members now %016llx.\n", - __func__, port, group, priv->lags_port_members[group]); - - return 0; -} - -/* Caller must hold priv->reg_mutex */ -int rtl83xx_lag_del(struct dsa_switch *ds, int group, int port) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - if (group >= priv->n_lags) { - pr_err("%s: LAG %d invalid.\n", __func__, group); - return -EINVAL; - } - - if (port >= priv->cpu_port) { - pr_err("%s: Port %d invalid.\n", __func__, port); - return -EINVAL; - } - - if (!(priv->lags_port_members[group] & BIT_ULL(port))) { - pr_err("%s: Port %d not member of LAG %d.\n", __func__, port, group); - return -ENOSPC; - } - - /* 0x7f algo mask all */ - priv->r->mask_port_reg_be(BIT_ULL(port), 0, priv->r->trk_mbr_ctr(group)); - priv->lags_port_members[group] &= ~BIT_ULL(port); - - pr_info("%s: Removed port %d from LAG %d. Members now %016llx.\n", - __func__, port, group, priv->lags_port_members[group]); - - return 0; -} - -// Currently Unused -// /* Allocate a 64 bit octet counter located in the LOG HW table */ -// static int rtl83xx_octet_cntr_alloc(struct rtl838x_switch_priv *priv) -// { -// int idx; - -// mutex_lock(&priv->reg_mutex); - -// idx = find_first_zero_bit(priv->octet_cntr_use_bm, MAX_COUNTERS); -// if (idx >= priv->n_counters) { -// mutex_unlock(&priv->reg_mutex); -// return -1; -// } - -// set_bit(idx, priv->octet_cntr_use_bm); -// mutex_unlock(&priv->reg_mutex); - -// return idx; -// } - -/* Allocate a 32-bit packet counter - * 2 32-bit packet counters share the location of a 64-bit octet counter - * Initially there are no free packet counters and 2 new ones need to be freed - * by allocating the corresponding octet counter - */ -int rtl83xx_packet_cntr_alloc(struct rtl838x_switch_priv *priv) -{ - int idx, j; - - mutex_lock(&priv->reg_mutex); - - /* Because initially no packet counters are free, the logic is reversed: - * a 0-bit means the counter is already allocated (for octets) - */ - idx = find_first_bit(priv->packet_cntr_use_bm, MAX_COUNTERS * 2); - if (idx >= priv->n_counters * 2) { - j = find_first_zero_bit(priv->octet_cntr_use_bm, MAX_COUNTERS); - if (j >= priv->n_counters) { - mutex_unlock(&priv->reg_mutex); - return -1; - } - set_bit(j, priv->octet_cntr_use_bm); - idx = j * 2; - set_bit(j * 2 + 1, priv->packet_cntr_use_bm); - - } else { - clear_bit(idx, priv->packet_cntr_use_bm); - } - - mutex_unlock(&priv->reg_mutex); - - return idx; -} - -/* Add an L2 nexthop entry for the L3 routing system / PIE forwarding in the SoC - * Use VID and MAC in rtl838x_l2_entry to identify either a free slot in the L2 hash table - * or mark an existing entry as a nexthop by setting it's nexthop bit - * Called from the L3 layer - * The index in the L2 hash table is filled into nh->l2_id; - */ -int rtl83xx_l2_nexthop_add(struct rtl838x_switch_priv *priv, struct rtl83xx_nexthop *nh) -{ - struct rtl838x_l2_entry e; - u64 seed = priv->r->l2_hash_seed(nh->mac, nh->rvid); - u32 key = priv->r->l2_hash_key(priv, seed); - int idx = -1; - u64 entry; - - pr_debug("%s searching for %08llx vid %d with key %d, seed: %016llx\n", - __func__, nh->mac, nh->rvid, key, seed); - - e.type = L2_UNICAST; - u64_to_ether_addr(nh->mac, &e.mac[0]); - e.port = nh->port; - - /* Loop over all entries in the hash-bucket and over the second block on 93xx SoCs */ - for (int i = 0; i < priv->l2_bucket_size; i++) { - entry = priv->r->read_l2_entry_using_hash(key, i, &e); - - if (!e.valid || ((entry & 0x0fffffffffffffffULL) == seed)) { - idx = i > 3 ? ((key >> 14) & 0xffff) | i >> 1 - : ((key << 2) | i) & 0xffff; - break; - } - } - - if (idx < 0) { - pr_err("%s: No more L2 forwarding entries available\n", __func__); - return -1; - } - - /* Found an existing (e->valid is true) or empty entry, make it a nexthop entry */ - nh->l2_id = idx; - if (e.valid) { - nh->port = e.port; - nh->vid = e.vid; /* Save VID */ - nh->rvid = e.rvid; - nh->dev_id = e.stack_dev; - /* If the entry is already a valid next hop entry, don't change it */ - if (e.next_hop) - return 0; - } else { - e.valid = true; - e.is_static = true; - e.rvid = nh->rvid; - e.is_ip_mc = false; - e.is_ipv6_mc = false; - e.block_da = false; - e.block_sa = false; - e.suspended = false; - e.age = 0; /* With port-ignore */ - e.port = priv->port_ignore; - u64_to_ether_addr(nh->mac, &e.mac[0]); - } - e.next_hop = true; - e.nh_route_id = nh->id; /* NH route ID takes place of VID */ - e.nh_vlan_target = false; - - priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e); - - return 0; -} - -/* Removes a Layer 2 next hop entry in the forwarding database - * If it was static, the entire entry is removed, otherwise the nexthop bit is cleared - * and we wait until the entry ages out - */ -int rtl83xx_l2_nexthop_rm(struct rtl838x_switch_priv *priv, struct rtl83xx_nexthop *nh) -{ - struct rtl838x_l2_entry e; - u32 key = nh->l2_id >> 2; - int i = nh->l2_id & 0x3; - u64 entry = entry = priv->r->read_l2_entry_using_hash(key, i, &e); - - pr_debug("%s: id %d, key %d, index %d\n", __func__, nh->l2_id, key, i); - if (!e.valid) { - dev_err(priv->dev, "unknown nexthop, id %x\n", nh->l2_id); - return -1; - } - - if (e.is_static) - e.valid = false; - e.next_hop = false; - e.vid = nh->vid; /* Restore VID */ - e.rvid = nh->rvid; - - priv->r->write_l2_entry_using_hash(key, i, &e); - - return 0; -} - -static int rtl83xx_handle_changeupper(struct rtl838x_switch_priv *priv, - struct net_device *ndev, - struct netdev_notifier_changeupper_info *info) -{ - struct net_device *upper = info->upper_dev; - struct netdev_lag_upper_info *lag_upper_info = NULL; - int i, j, err; - - if (!netif_is_lag_master(upper)) - return 0; - - mutex_lock(&priv->reg_mutex); - - for (i = 0; i < priv->n_lags; i++) { - if ((!priv->lag_devs[i]) || (priv->lag_devs[i] == upper)) - break; - } - for (j = 0; j < priv->cpu_port; j++) { - if (priv->ports[j].dp->slave == ndev) - break; - } - if (j >= priv->cpu_port) { - err = -EINVAL; - goto out; - } - - if (info->linking) { - lag_upper_info = info->upper_info; - if (!priv->lag_devs[i]) - priv->lag_devs[i] = upper; - err = rtl83xx_lag_add(priv->ds, i, priv->ports[j].dp->index, lag_upper_info); - if (err) { - err = -EINVAL; - goto out; - } - } else { - if (!priv->lag_devs[i]) - err = -EINVAL; - err = rtl83xx_lag_del(priv->ds, i, priv->ports[j].dp->index); - if (err) { - err = -EINVAL; - goto out; - } - if (!priv->lags_port_members[i]) - priv->lag_devs[i] = NULL; - } - -out: - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -/* Is the lower network device a DSA slave network device of our RTL930X-switch? - * Unfortunately we cannot just follow dev->dsa_prt as this is only set for the - * DSA master device. - */ -int rtl83xx_port_is_under(const struct net_device * dev, struct rtl838x_switch_priv *priv) -{ -/* TODO: On 5.12: - * if(!dsa_slave_dev_check(dev)) { - * netdev_info(dev, "%s: not a DSA device.\n", __func__); - * return -EINVAL; - * } - */ - - for (int i = 0; i < priv->cpu_port; i++) { - if (!priv->ports[i].dp) - continue; - if (priv->ports[i].dp->slave == dev) - return i; - } - - return -EINVAL; -} - -static int rtl83xx_netdevice_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct net_device *ndev = netdev_notifier_info_to_dev(ptr); - struct rtl838x_switch_priv *priv; - int err; - - pr_debug("In: %s, event: %lu\n", __func__, event); - - if ((event != NETDEV_CHANGEUPPER) && (event != NETDEV_CHANGELOWERSTATE)) - return NOTIFY_DONE; - - priv = container_of(this, struct rtl838x_switch_priv, nb); - switch (event) { - case NETDEV_CHANGEUPPER: - err = rtl83xx_handle_changeupper(priv, ndev, ptr); - break; - } - - if (err) - return err; - - return NOTIFY_DONE; -} - -const static struct rhashtable_params route_ht_params = { - .key_len = sizeof(u32), - .key_offset = offsetof(struct rtl83xx_route, gw_ip), - .head_offset = offsetof(struct rtl83xx_route, linkage), -}; - -/* Updates an L3 next hop entry in the ROUTING table */ -static int rtl83xx_l3_nexthop_update(struct rtl838x_switch_priv *priv, __be32 ip_addr, u64 mac) -{ - struct rtl83xx_route *r; - struct rhlist_head *tmp, *list; - - rcu_read_lock(); - list = rhltable_lookup(&priv->routes, &ip_addr, route_ht_params); - if (!list) { - rcu_read_unlock(); - return -ENOENT; - } - - rhl_for_each_entry_rcu(r, tmp, list, linkage) { - pr_info("%s: Setting up fwding: ip %pI4, GW mac %016llx\n", - __func__, &ip_addr, mac); - - /* Reads the ROUTING table entry associated with the route */ - priv->r->route_read(r->id, r); - pr_info("Route with id %d to %pI4 / %d\n", r->id, &r->dst_ip, r->prefix_len); - - r->nh.mac = r->nh.gw = mac; - r->nh.port = priv->port_ignore; - r->nh.id = r->id; - - /* Do we need to explicitly add a DMAC entry with the route's nh index? */ - if (priv->r->set_l3_egress_mac) - priv->r->set_l3_egress_mac(r->id, mac); - - /* Update ROUTING table: map gateway-mac and switch-mac id to route id */ - rtl83xx_l2_nexthop_add(priv, &r->nh); - - r->attr.valid = true; - r->attr.action = ROUTE_ACT_FORWARD; - r->attr.type = 0; - r->attr.hit = false; /* Reset route-used indicator */ - - /* Add PIE entry with dst_ip and prefix_len */ - r->pr.dip = r->dst_ip; - r->pr.dip_m = inet_make_mask(r->prefix_len); - - if (r->is_host_route) { - int slot = priv->r->find_l3_slot(r, false); - - pr_info("%s: Got slot for route: %d\n", __func__, slot); - priv->r->host_route_write(slot, r); - } else { - priv->r->route_write(r->id, r); - r->pr.fwd_sel = true; - r->pr.fwd_data = r->nh.l2_id; - r->pr.fwd_act = PIE_ACT_ROUTE_UC; - } - - if (priv->r->set_l3_nexthop) - priv->r->set_l3_nexthop(r->nh.id, r->nh.l2_id, r->nh.if_id); - - if (r->pr.id < 0) { - r->pr.packet_cntr = rtl83xx_packet_cntr_alloc(priv); - if (r->pr.packet_cntr >= 0) { - pr_info("Using packet counter %d\n", r->pr.packet_cntr); - r->pr.log_sel = true; - r->pr.log_data = r->pr.packet_cntr; - } - priv->r->pie_rule_add(priv, &r->pr); - } else { - int pkts = priv->r->packet_cntr_read(r->pr.packet_cntr); - pr_info("%s: total packets: %d\n", __func__, pkts); - - priv->r->pie_rule_write(priv, r->pr.id, &r->pr); - } - } - rcu_read_unlock(); - - return 0; -} - -static int rtl83xx_port_ipv4_resolve(struct rtl838x_switch_priv *priv, - struct net_device *dev, __be32 ip_addr) -{ - struct neighbour *n = neigh_lookup(&arp_tbl, &ip_addr, dev); - int err = 0; - u64 mac; - - if (!n) { - n = neigh_create(&arp_tbl, &ip_addr, dev); - if (IS_ERR(n)) - return PTR_ERR(n); - } - - /* If the neigh is already resolved, then go ahead and - * install the entry, otherwise start the ARP process to - * resolve the neigh. - */ - if (n->nud_state & NUD_VALID) { - mac = ether_addr_to_u64(n->ha); - pr_info("%s: resolved mac: %016llx\n", __func__, mac); - rtl83xx_l3_nexthop_update(priv, ip_addr, mac); - } else { - pr_info("%s: need to wait\n", __func__); - neigh_event_send(n, NULL); - } - - neigh_release(n); - - return err; -} - -struct rtl83xx_walk_data { - struct rtl838x_switch_priv *priv; - int port; -}; - -static int rtl83xx_port_lower_walk(struct net_device *lower, struct netdev_nested_priv *_priv) -{ - struct rtl83xx_walk_data *data = (struct rtl83xx_walk_data *)_priv->data; - struct rtl838x_switch_priv *priv = data->priv; - int ret = 0; - int index; - - index = rtl83xx_port_is_under(lower, priv); - data->port = index; - if (index >= 0) { - pr_debug("Found DSA-port, index %d\n", index); - ret = 1; - } - - return ret; -} - -int rtl83xx_port_dev_lower_find(struct net_device *dev, struct rtl838x_switch_priv *priv) -{ - struct rtl83xx_walk_data data; - struct netdev_nested_priv _priv; - - data.priv = priv; - data.port = 0; - _priv.data = (void *)&data; - - netdev_walk_all_lower_dev(dev, rtl83xx_port_lower_walk, &_priv); - - return data.port; -} - -static struct rtl83xx_route *rtl83xx_route_alloc(struct rtl838x_switch_priv *priv, u32 ip) -{ - struct rtl83xx_route *r; - int idx = 0, err; - - mutex_lock(&priv->reg_mutex); - - idx = find_first_zero_bit(priv->route_use_bm, MAX_ROUTES); - pr_debug("%s id: %d, ip %pI4\n", __func__, idx, &ip); - - r = kzalloc(sizeof(*r), GFP_KERNEL); - if (!r) { - mutex_unlock(&priv->reg_mutex); - return r; - } - - r->id = idx; - r->gw_ip = ip; - r->pr.id = -1; /* We still need to allocate a rule in HW */ - r->is_host_route = false; - - err = rhltable_insert(&priv->routes, &r->linkage, route_ht_params); - if (err) { - pr_err("Could not insert new rule\n"); - mutex_unlock(&priv->reg_mutex); - goto out_free; - } - - set_bit(idx, priv->route_use_bm); - - mutex_unlock(&priv->reg_mutex); - - return r; - -out_free: - kfree(r); - - return NULL; -} - - -static struct rtl83xx_route *rtl83xx_host_route_alloc(struct rtl838x_switch_priv *priv, u32 ip) -{ - struct rtl83xx_route *r; - int idx = 0, err; - - mutex_lock(&priv->reg_mutex); - - idx = find_first_zero_bit(priv->host_route_use_bm, MAX_HOST_ROUTES); - pr_debug("%s id: %d, ip %pI4\n", __func__, idx, &ip); - - r = kzalloc(sizeof(*r), GFP_KERNEL); - if (!r) { - mutex_unlock(&priv->reg_mutex); - return r; - } - - /* We require a unique route ID irrespective of whether it is a prefix or host - * route (on RTL93xx) as we use this ID to associate a DMAC and next-hop entry - */ - r->id = idx + MAX_ROUTES; - - r->gw_ip = ip; - r->pr.id = -1; /* We still need to allocate a rule in HW */ - r->is_host_route = true; - - err = rhltable_insert(&priv->routes, &r->linkage, route_ht_params); - if (err) { - pr_err("Could not insert new rule\n"); - mutex_unlock(&priv->reg_mutex); - goto out_free; - } - - set_bit(idx, priv->host_route_use_bm); - - mutex_unlock(&priv->reg_mutex); - - return r; - -out_free: - kfree(r); - - return NULL; -} - - - -static void rtl83xx_route_rm(struct rtl838x_switch_priv *priv, struct rtl83xx_route *r) -{ - int id; - - if (rhltable_remove(&priv->routes, &r->linkage, route_ht_params)) - dev_warn(priv->dev, "Could not remove route\n"); - - if (r->is_host_route) { - id = priv->r->find_l3_slot(r, false); - pr_debug("%s: Got id for host route: %d\n", __func__, id); - r->attr.valid = false; - priv->r->host_route_write(id, r); - clear_bit(r->id - MAX_ROUTES, priv->host_route_use_bm); - } else { - /* If there is a HW representation of the route, delete it */ - if (priv->r->route_lookup_hw) { - id = priv->r->route_lookup_hw(r); - pr_info("%s: Got id for prefix route: %d\n", __func__, id); - r->attr.valid = false; - priv->r->route_write(id, r); - } - clear_bit(r->id, priv->route_use_bm); - } - - kfree(r); -} - -static int rtl83xx_fib4_del(struct rtl838x_switch_priv *priv, - struct fib_entry_notifier_info *info) -{ - struct fib_nh *nh = fib_info_nh(info->fi, 0); - struct rtl83xx_route *r; - struct rhlist_head *tmp, *list; - - pr_debug("In %s, ip %pI4, len %d\n", __func__, &info->dst, info->dst_len); - rcu_read_lock(); - list = rhltable_lookup(&priv->routes, &nh->fib_nh_gw4, route_ht_params); - if (!list) { - rcu_read_unlock(); - pr_err("%s: no such gateway: %pI4\n", __func__, &nh->fib_nh_gw4); - return -ENOENT; - } - rhl_for_each_entry_rcu(r, tmp, list, linkage) { - if (r->dst_ip == info->dst && r->prefix_len == info->dst_len) { - pr_info("%s: found a route with id %d, nh-id %d\n", - __func__, r->id, r->nh.id); - break; - } - } - rcu_read_unlock(); - - rtl83xx_l2_nexthop_rm(priv, &r->nh); - - pr_debug("%s: Releasing packet counter %d\n", __func__, r->pr.packet_cntr); - set_bit(r->pr.packet_cntr, priv->packet_cntr_use_bm); - priv->r->pie_rule_rm(priv, &r->pr); - - rtl83xx_route_rm(priv, r); - - nh->fib_nh_flags &= ~RTNH_F_OFFLOAD; - - return 0; -} - -/* On the RTL93xx, an L3 termination endpoint MAC address on which the router waits - * for packets to be routed needs to be allocated. - */ -static int rtl83xx_alloc_router_mac(struct rtl838x_switch_priv *priv, u64 mac) -{ - int free_mac = -1; - struct rtl93xx_rt_mac m; - - mutex_lock(&priv->reg_mutex); - for (int i = 0; i < MAX_ROUTER_MACS; i++) { - priv->r->get_l3_router_mac(i, &m); - if (free_mac < 0 && !m.valid) { - free_mac = i; - continue; - } - if (m.valid && m.mac == mac) { - free_mac = i; - break; - } - } - - if (free_mac < 0) { - pr_err("No free router MACs, cannot offload\n"); - mutex_unlock(&priv->reg_mutex); - return -1; - } - - m.valid = true; - m.mac = mac; - m.p_type = 0; /* An individual port, not a trunk port */ - m.p_id = 0x3f; /* Listen on any port */ - m.p_id_mask = 0; - m.vid = 0; /* Listen on any VLAN... */ - m.vid_mask = 0; /* ... so mask needs to be 0 */ - m.mac_mask = 0xffffffffffffULL; /* We want an exact match of the interface MAC */ - m.action = L3_FORWARD; /* Route the packet */ - priv->r->set_l3_router_mac(free_mac, &m); - - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int rtl83xx_alloc_egress_intf(struct rtl838x_switch_priv *priv, u64 mac, int vlan) -{ - int free_mac = -1; - struct rtl838x_l3_intf intf; - u64 m; - - mutex_lock(&priv->reg_mutex); - for (int i = 0; i < MAX_SMACS; i++) { - m = priv->r->get_l3_egress_mac(L3_EGRESS_DMACS + i); - if (free_mac < 0 && !m) { - free_mac = i; - continue; - } - if (m == mac) { - mutex_unlock(&priv->reg_mutex); - return i; - } - } - - if (free_mac < 0) { - pr_err("No free egress interface, cannot offload\n"); - return -1; - } - - /* Set up default egress interface 1 */ - intf.vid = vlan; - intf.smac_idx = free_mac; - intf.ip4_mtu_id = 1; - intf.ip6_mtu_id = 1; - intf.ttl_scope = 1; /* TTL */ - intf.hl_scope = 1; /* Hop Limit */ - intf.ip4_icmp_redirect = intf.ip6_icmp_redirect = 2; /* FORWARD */ - intf.ip4_pbr_icmp_redirect = intf.ip6_pbr_icmp_redirect = 2; /* FORWARD; */ - priv->r->set_l3_egress_intf(free_mac, &intf); - - priv->r->set_l3_egress_mac(L3_EGRESS_DMACS + free_mac, mac); - - mutex_unlock(&priv->reg_mutex); - - return free_mac; -} - -static int rtl83xx_fib4_add(struct rtl838x_switch_priv *priv, - struct fib_entry_notifier_info *info) -{ - struct fib_nh *nh = fib_info_nh(info->fi, 0); - struct net_device *dev = fib_info_nh(info->fi, 0)->fib_nh_dev; - int port; - struct rtl83xx_route *r; - bool to_localhost; - int vlan = is_vlan_dev(dev) ? vlan_dev_vlan_id(dev) : 0; - - pr_debug("In %s, ip %pI4, len %d\n", __func__, &info->dst, info->dst_len); - if (!info->dst) { - pr_info("Not offloading default route for now\n"); - return 0; - } - - pr_debug("GW: %pI4, interface name %s, mac %016llx, vlan %d\n", &nh->fib_nh_gw4, dev->name, - ether_addr_to_u64(dev->dev_addr), vlan - ); - - port = rtl83xx_port_dev_lower_find(dev, priv); - if (port < 0) - return -1; - - /* For now we only work with routes that have a gateway and are not ourself */ -/* if ((!nh->fib_nh_gw4) && (info->dst_len != 32)) */ -/* return 0; */ - - if ((info->dst & 0xff) == 0xff) - return 0; - - /* Do not offload routes to 192.168.100.x */ - if ((info->dst & 0xffffff00) == 0xc0a86400) - return 0; - - /* Do not offload routes to 127.x.x.x */ - if ((info->dst & 0xff000000) == 0x7f000000) - return 0; - - /* Allocate route or host-route (entry if hardware supports this) */ - if (info->dst_len == 32 && priv->r->host_route_write) - r = rtl83xx_host_route_alloc(priv, nh->fib_nh_gw4); - else - r = rtl83xx_route_alloc(priv, nh->fib_nh_gw4); - - if (!r) { - pr_err("%s: No more free route entries\n", __func__); - return -1; - } - - r->dst_ip = info->dst; - r->prefix_len = info->dst_len; - r->nh.rvid = vlan; - to_localhost = !nh->fib_nh_gw4; - - if (priv->r->set_l3_router_mac) { - u64 mac = ether_addr_to_u64(dev->dev_addr); - - pr_debug("Local route and router mac %016llx\n", mac); - - if (rtl83xx_alloc_router_mac(priv, mac)) - goto out_free_rt; - - /* vid = 0: Do not care about VID */ - r->nh.if_id = rtl83xx_alloc_egress_intf(priv, mac, vlan); - if (r->nh.if_id < 0) - goto out_free_rmac; - - if (to_localhost) { - int slot; - - r->nh.mac = mac; - r->nh.port = priv->port_ignore; - r->attr.valid = true; - r->attr.action = ROUTE_ACT_TRAP2CPU; - r->attr.type = 0; - - slot = priv->r->find_l3_slot(r, false); - pr_debug("%s: Got slot for route: %d\n", __func__, slot); - priv->r->host_route_write(slot, r); - } - } - - /* We need to resolve the mac address of the GW */ - if (!to_localhost) - rtl83xx_port_ipv4_resolve(priv, dev, nh->fib_nh_gw4); - - nh->fib_nh_flags |= RTNH_F_OFFLOAD; - - return 0; - -out_free_rmac: -out_free_rt: - return 0; -} - -static int rtl83xx_fib6_add(struct rtl838x_switch_priv *priv, - struct fib6_entry_notifier_info *info) -{ - pr_debug("In %s\n", __func__); -/* nh->fib_nh_flags |= RTNH_F_OFFLOAD; */ - - return 0; -} - -struct net_event_work { - struct work_struct work; - struct rtl838x_switch_priv *priv; - u64 mac; - u32 gw_addr; -}; - -static void rtl83xx_net_event_work_do(struct work_struct *work) -{ - struct net_event_work *net_work = - container_of(work, struct net_event_work, work); - struct rtl838x_switch_priv *priv = net_work->priv; - - rtl83xx_l3_nexthop_update(priv, net_work->gw_addr, net_work->mac); - - kfree(net_work); -} - -static int rtl83xx_netevent_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - struct rtl838x_switch_priv *priv; - struct net_device *dev; - struct neighbour *n = ptr; - int err, port; - struct net_event_work *net_work; - - priv = container_of(this, struct rtl838x_switch_priv, ne_nb); - - switch (event) { - case NETEVENT_NEIGH_UPDATE: - if (n->tbl != &arp_tbl) - return NOTIFY_DONE; - dev = n->dev; - port = rtl83xx_port_dev_lower_find(dev, priv); - if (port < 0 || !(n->nud_state & NUD_VALID)) { - pr_debug("%s: Neigbour invalid, not updating\n", __func__); - return NOTIFY_DONE; - } - - net_work = kzalloc(sizeof(*net_work), GFP_ATOMIC); - if (!net_work) - return NOTIFY_BAD; - - INIT_WORK(&net_work->work, rtl83xx_net_event_work_do); - net_work->priv = priv; - - net_work->mac = ether_addr_to_u64(n->ha); - net_work->gw_addr = *(__be32 *) n->primary_key; - - pr_debug("%s: updating neighbour on port %d, mac %016llx\n", - __func__, port, net_work->mac); - schedule_work(&net_work->work); - if (err) - netdev_warn(dev, "failed to handle neigh update (err %d)\n", err); - break; - } - - return NOTIFY_DONE; -} - -struct rtl83xx_fib_event_work { - struct work_struct work; - union { - struct fib_entry_notifier_info fen_info; - struct fib6_entry_notifier_info fen6_info; - struct fib_rule_notifier_info fr_info; - }; - struct rtl838x_switch_priv *priv; - bool is_fib6; - unsigned long event; -}; - -static void rtl83xx_fib_event_work_do(struct work_struct *work) -{ - struct rtl83xx_fib_event_work *fib_work = - container_of(work, struct rtl83xx_fib_event_work, work); - struct rtl838x_switch_priv *priv = fib_work->priv; - struct fib_rule *rule; - int err; - - /* Protect internal structures from changes */ - rtnl_lock(); - pr_debug("%s: doing work, event %ld\n", __func__, fib_work->event); - switch (fib_work->event) { - case FIB_EVENT_ENTRY_ADD: - case FIB_EVENT_ENTRY_REPLACE: - case FIB_EVENT_ENTRY_APPEND: - if (fib_work->is_fib6) { - err = rtl83xx_fib6_add(priv, &fib_work->fen6_info); - } else { - err = rtl83xx_fib4_add(priv, &fib_work->fen_info); - fib_info_put(fib_work->fen_info.fi); - } - if (err) - pr_err("%s: FIB4 failed\n", __func__); - break; - case FIB_EVENT_ENTRY_DEL: - rtl83xx_fib4_del(priv, &fib_work->fen_info); - fib_info_put(fib_work->fen_info.fi); - break; - case FIB_EVENT_RULE_ADD: - case FIB_EVENT_RULE_DEL: - rule = fib_work->fr_info.rule; - if (!fib4_rule_default(rule)) - pr_err("%s: FIB4 default rule failed\n", __func__); - fib_rule_put(rule); - break; - } - rtnl_unlock(); - kfree(fib_work); -} - -/* Called with rcu_read_lock() */ -static int rtl83xx_fib_event(struct notifier_block *this, unsigned long event, void *ptr) -{ - struct fib_notifier_info *info = ptr; - struct rtl838x_switch_priv *priv; - struct rtl83xx_fib_event_work *fib_work; - - if ((info->family != AF_INET && info->family != AF_INET6 && - info->family != RTNL_FAMILY_IPMR && - info->family != RTNL_FAMILY_IP6MR)) - return NOTIFY_DONE; - - priv = container_of(this, struct rtl838x_switch_priv, fib_nb); - - fib_work = kzalloc(sizeof(*fib_work), GFP_ATOMIC); - if (!fib_work) - return NOTIFY_BAD; - - INIT_WORK(&fib_work->work, rtl83xx_fib_event_work_do); - fib_work->priv = priv; - fib_work->event = event; - fib_work->is_fib6 = false; - - switch (event) { - case FIB_EVENT_ENTRY_ADD: - case FIB_EVENT_ENTRY_REPLACE: - case FIB_EVENT_ENTRY_APPEND: - case FIB_EVENT_ENTRY_DEL: - pr_debug("%s: FIB_ENTRY ADD/DEL, event %ld\n", __func__, event); - if (info->family == AF_INET) { - struct fib_entry_notifier_info *fen_info = ptr; - - if (fen_info->fi->fib_nh_is_v6) { - NL_SET_ERR_MSG_MOD(info->extack, - "IPv6 gateway with IPv4 route is not supported"); - kfree(fib_work); - return notifier_from_errno(-EINVAL); - } - - memcpy(&fib_work->fen_info, ptr, sizeof(fib_work->fen_info)); - /* Take referece on fib_info to prevent it from being - * freed while work is queued. Release it afterwards. - */ - fib_info_hold(fib_work->fen_info.fi); - - } else if (info->family == AF_INET6) { - //struct fib6_entry_notifier_info *fen6_info = ptr; - pr_warn("%s: FIB_RULE ADD/DEL for IPv6 not supported\n", __func__); - kfree(fib_work); - return NOTIFY_DONE; - } - break; - - case FIB_EVENT_RULE_ADD: - case FIB_EVENT_RULE_DEL: - pr_debug("%s: FIB_RULE ADD/DEL, event: %ld\n", __func__, event); - memcpy(&fib_work->fr_info, ptr, sizeof(fib_work->fr_info)); - fib_rule_get(fib_work->fr_info.rule); - break; - } - - schedule_work(&fib_work->work); - - return NOTIFY_DONE; -} - -static int __init rtl83xx_sw_probe(struct platform_device *pdev) -{ - int err = 0; - struct rtl838x_switch_priv *priv; - struct device *dev = &pdev->dev; - u64 bpdu_mask; - - pr_debug("Probing RTL838X switch device\n"); - if (!pdev->dev.of_node) { - dev_err(dev, "No DT found\n"); - return -EINVAL; - } - - /* Initialize access to RTL switch tables */ - rtl_table_init(); - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - - if (!priv->ds) - return -ENOMEM; - priv->ds->dev = dev; - priv->ds->priv = priv; - priv->ds->ops = &rtl83xx_switch_ops; - priv->ds->needs_standalone_vlan_filtering = true; - priv->dev = dev; - - mutex_init(&priv->reg_mutex); - - priv->family_id = soc_info.family; - priv->id = soc_info.id; - switch(soc_info.family) { - case RTL8380_FAMILY_ID: - priv->ds->ops = &rtl83xx_switch_ops; - priv->cpu_port = RTL838X_CPU_PORT; - priv->port_mask = 0x1f; - priv->port_width = 1; - priv->irq_mask = 0x0FFFFFFF; - priv->r = &rtl838x_reg; - priv->ds->num_ports = 29; - priv->fib_entries = 8192; - rtl8380_get_version(priv); - priv->n_lags = 8; - priv->l2_bucket_size = 4; - priv->n_pie_blocks = 12; - priv->port_ignore = 0x1f; - priv->n_counters = 128; - break; - case RTL8390_FAMILY_ID: - priv->ds->ops = &rtl83xx_switch_ops; - priv->cpu_port = RTL839X_CPU_PORT; - priv->port_mask = 0x3f; - priv->port_width = 2; - priv->irq_mask = 0xFFFFFFFFFFFFFULL; - priv->r = &rtl839x_reg; - priv->ds->num_ports = 53; - priv->fib_entries = 16384; - rtl8390_get_version(priv); - priv->n_lags = 16; - priv->l2_bucket_size = 4; - priv->n_pie_blocks = 18; - priv->port_ignore = 0x3f; - priv->n_counters = 1024; - break; - case RTL9300_FAMILY_ID: - priv->ds->ops = &rtl930x_switch_ops; - priv->cpu_port = RTL930X_CPU_PORT; - priv->port_mask = 0x1f; - priv->port_width = 1; - priv->irq_mask = 0x0FFFFFFF; - priv->r = &rtl930x_reg; - priv->ds->num_ports = 29; - priv->fib_entries = 16384; - priv->version = RTL8390_VERSION_A; - priv->n_lags = 16; - sw_w32(1, RTL930X_ST_CTRL); - priv->l2_bucket_size = 8; - priv->n_pie_blocks = 16; - priv->port_ignore = 0x3f; - priv->n_counters = 2048; - break; - case RTL9310_FAMILY_ID: - priv->ds->ops = &rtl930x_switch_ops; - priv->cpu_port = RTL931X_CPU_PORT; - priv->port_mask = 0x3f; - priv->port_width = 2; - priv->irq_mask = 0xFFFFFFFFFFFFFULL; - priv->r = &rtl931x_reg; - priv->ds->num_ports = 57; - priv->fib_entries = 16384; - priv->version = RTL8390_VERSION_A; - priv->n_lags = 16; - priv->l2_bucket_size = 8; - break; - } - pr_debug("Chip version %c\n", priv->version); - - err = rtl83xx_mdio_probe(priv); - if (err) { - /* Probing fails the 1st time because of missing ethernet driver - * initialization. Use this to disable traffic in case the bootloader left if on - */ - return err; - } - - err = dsa_register_switch(priv->ds); - if (err) { - dev_err(dev, "Error registering switch: %d\n", err); - return err; - } - - /* dsa_to_port returns dsa_port from the port list in - * dsa_switch_tree, the tree is built when the switch - * is registered by dsa_register_switch - */ - for (int i = 0; i <= priv->cpu_port; i++) - priv->ports[i].dp = dsa_to_port(priv->ds, i); - - /* Enable link and media change interrupts. Are the SERDES masks needed? */ - sw_w32_mask(0, 3, priv->r->isr_glb_src); - - priv->r->set_port_reg_le(priv->irq_mask, priv->r->isr_port_link_sts_chg); - priv->r->set_port_reg_le(priv->irq_mask, priv->r->imr_port_link_sts_chg); - - priv->link_state_irq = platform_get_irq(pdev, 0); - pr_info("LINK state irq: %d\n", priv->link_state_irq); - switch (priv->family_id) { - case RTL8380_FAMILY_ID: - err = request_irq(priv->link_state_irq, rtl838x_switch_irq, - IRQF_SHARED, "rtl838x-link-state", priv->ds); - break; - case RTL8390_FAMILY_ID: - err = request_irq(priv->link_state_irq, rtl839x_switch_irq, - IRQF_SHARED, "rtl839x-link-state", priv->ds); - break; - case RTL9300_FAMILY_ID: - err = request_irq(priv->link_state_irq, rtl930x_switch_irq, - IRQF_SHARED, "rtl930x-link-state", priv->ds); - break; - case RTL9310_FAMILY_ID: - err = request_irq(priv->link_state_irq, rtl931x_switch_irq, - IRQF_SHARED, "rtl931x-link-state", priv->ds); - break; - } - if (err) { - dev_err(dev, "Error setting up switch interrupt.\n"); - /* Need to free allocated switch here */ - } - - /* Enable interrupts for switch, on RTL931x, the IRQ is always on globally */ - if (soc_info.family != RTL9310_FAMILY_ID) - sw_w32(0x1, priv->r->imr_glb); - - rtl83xx_get_l2aging(priv); - - rtl83xx_setup_qos(priv); - - priv->r->l3_setup(priv); - - /* Clear all destination ports for mirror groups */ - for (int i = 0; i < 4; i++) - priv->mirror_group_ports[i] = -1; - - /* Register netdevice event callback to catch changes in link aggregation groups */ - priv->nb.notifier_call = rtl83xx_netdevice_event; - if (register_netdevice_notifier(&priv->nb)) { - priv->nb.notifier_call = NULL; - dev_err(dev, "Failed to register LAG netdev notifier\n"); - goto err_register_nb; - } - - /* Initialize hash table for L3 routing */ - rhltable_init(&priv->routes, &route_ht_params); - - /* Register netevent notifier callback to catch notifications about neighboring - * changes to update nexthop entries for L3 routing. - */ - priv->ne_nb.notifier_call = rtl83xx_netevent_event; - if (register_netevent_notifier(&priv->ne_nb)) { - priv->ne_nb.notifier_call = NULL; - dev_err(dev, "Failed to register netevent notifier\n"); - goto err_register_ne_nb; - } - - priv->fib_nb.notifier_call = rtl83xx_fib_event; - - /* Register Forwarding Information Base notifier to offload routes where - * where possible - * Only FIBs pointing to our own netdevs are programmed into - * the device, so no need to pass a callback. - */ - err = register_fib_notifier(&init_net, &priv->fib_nb, NULL, NULL); - if (err) - goto err_register_fib_nb; - - /* TODO: put this into l2_setup() */ - /* Flood BPDUs to all ports including cpu-port */ - if (soc_info.family != RTL9300_FAMILY_ID) { - bpdu_mask = soc_info.family == RTL8380_FAMILY_ID ? 0x1FFFFFFF : 0x1FFFFFFFFFFFFF; - priv->r->set_port_reg_be(bpdu_mask, priv->r->rma_bpdu_fld_pmask); - - /* TRAP 802.1X frames (EAPOL) to the CPU-Port, bypass STP and VLANs */ - sw_w32(7, priv->r->spcl_trap_eapol_ctrl); - - rtl838x_dbgfs_init(priv); - } else { - rtl930x_dbgfs_init(priv); - } - - return 0; - -err_register_fib_nb: - unregister_netevent_notifier(&priv->ne_nb); -err_register_ne_nb: - unregister_netdevice_notifier(&priv->nb); -err_register_nb: - return err; -} - -static int rtl83xx_sw_remove(struct platform_device *pdev) -{ - /* TODO: */ - pr_debug("Removing platform driver for rtl83xx-sw\n"); - - return 0; -} - -static const struct of_device_id rtl83xx_switch_of_ids[] = { - { .compatible = "realtek,rtl83xx-switch"}, - { /* sentinel */ } -}; - - -MODULE_DEVICE_TABLE(of, rtl83xx_switch_of_ids); - -static struct platform_driver rtl83xx_switch_driver = { - .probe = rtl83xx_sw_probe, - .remove = rtl83xx_sw_remove, - .driver = { - .name = "rtl83xx-switch", - .pm = NULL, - .of_match_table = rtl83xx_switch_of_ids, - }, -}; - -module_platform_driver(rtl83xx_switch_driver); - -MODULE_AUTHOR("B. Koblitz"); -MODULE_DESCRIPTION("RTL83XX SoC Switch Driver"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/debugfs.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/debugfs.c deleted file mode 100644 index 92d6932dc5..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/debugfs.c +++ /dev/null @@ -1,719 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include - -#include "rtl83xx.h" - -#define RTL838X_DRIVER_NAME "rtl838x" - -#define RTL8390_LED_GLB_CTRL (0x00E4) -#define RTL8390_LED_SET_2_3_CTRL (0x00E8) -#define RTL8390_LED_SET_0_1_CTRL (0x00EC) -#define RTL8390_LED_COPR_SET_SEL_CTRL(p) (0x00F0 + (((p >> 4) << 2))) -#define RTL8390_LED_FIB_SET_SEL_CTRL(p) (0x0100 + (((p >> 4) << 2))) -#define RTL8390_LED_COPR_PMASK_CTRL(p) (0x0110 + (((p >> 5) << 2))) -#define RTL8390_LED_FIB_PMASK_CTRL(p) (0x00118 + (((p >> 5) << 2))) -#define RTL8390_LED_COMBO_CTRL(p) (0x0120 + (((p >> 5) << 2))) -#define RTL8390_LED_SW_CTRL (0x0128) -#define RTL8390_LED_SW_P_EN_CTRL(p) (0x012C + (((p / 10) << 2))) -#define RTL8390_LED_SW_P_CTRL(p) (0x0144 + (((p) << 2))) - -#define RTL838X_MIR_QID_CTRL(grp) (0xAD44 + (((grp) << 2))) -#define RTL838X_MIR_RSPAN_VLAN_CTRL(grp) (0xA340 + (((grp) << 2))) -#define RTL838X_MIR_RSPAN_VLAN_CTRL_MAC(grp) (0xAA70 + (((grp) << 2))) -#define RTL838X_MIR_RSPAN_TX_CTRL (0xA350) -#define RTL838X_MIR_RSPAN_TX_TAG_RM_CTRL (0xAA80) -#define RTL838X_MIR_RSPAN_TX_TAG_EN_CTRL (0xAA84) -#define RTL839X_MIR_RSPAN_VLAN_CTRL(grp) (0xA340 + (((grp) << 2))) -#define RTL839X_MIR_RSPAN_TX_CTRL (0x69b0) -#define RTL839X_MIR_RSPAN_TX_TAG_RM_CTRL (0x2550) -#define RTL839X_MIR_RSPAN_TX_TAG_EN_CTRL (0x2554) -#define RTL839X_MIR_SAMPLE_RATE_CTRL (0x2558) - -#define RTL838X_STAT_PRVTE_DROP_COUNTERS (0x6A00) -#define RTL839X_STAT_PRVTE_DROP_COUNTERS (0x3E00) -#define RTL930X_STAT_PRVTE_DROP_COUNTERS (0xB5B8) -#define RTL931X_STAT_PRVTE_DROP_COUNTERS (0xd800) - -int rtl83xx_port_get_stp_state(struct rtl838x_switch_priv *priv, int port); -void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port, u8 state); -void rtl83xx_fast_age(struct dsa_switch *ds, int port); -u32 rtl838x_get_egress_rate(struct rtl838x_switch_priv *priv, int port); -u32 rtl839x_get_egress_rate(struct rtl838x_switch_priv *priv, int port); -int rtl838x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate); -int rtl839x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate); - - -const char *rtl838x_drop_cntr[] = { - "ALE_TX_GOOD_PKTS", "MAC_RX_DROP", "ACL_FWD_DROP", "HW_ATTACK_PREVENTION_DROP", - "RMA_DROP", "VLAN_IGR_FLTR_DROP", "INNER_OUTER_CFI_EQUAL_1_DROP", "PORT_MOVE_DROP", - "NEW_SA_DROP", "MAC_LIMIT_SYS_DROP", "MAC_LIMIT_VLAN_DROP", "MAC_LIMIT_PORT_DROP", - "SWITCH_MAC_DROP", "ROUTING_EXCEPTION_DROP", "DA_LKMISS_DROP", "RSPAN_DROP", - "ACL_LKMISS_DROP", "ACL_DROP", "INBW_DROP", "IGR_METER_DROP", - "ACCEPT_FRAME_TYPE_DROP", "STP_IGR_DROP", "INVALID_SA_DROP", "SA_BLOCKING_DROP", - "DA_BLOCKING_DROP", "L2_INVALID_DPM_DROP", "MCST_INVALID_DPM_DROP", "RX_FLOW_CONTROL_DROP", - "STORM_SPPRS_DROP", "LALS_DROP", "VLAN_EGR_FILTER_DROP", "STP_EGR_DROP", - "SRC_PORT_FILTER_DROP", "PORT_ISOLATION_DROP", "ACL_FLTR_DROP", "MIRROR_FLTR_DROP", - "TX_MAX_DROP", "LINK_DOWN_DROP", "FLOW_CONTROL_DROP", "BRIDGE .1d discards" -}; - -const char *rtl839x_drop_cntr[] = { - "ALE_TX_GOOD_PKTS", "ERROR_PKTS", "EGR_ACL_DROP", "EGR_METER_DROP", - "OAM", "CFM" "VLAN_IGR_FLTR", "VLAN_ERR", - "INNER_OUTER_CFI_EQUAL_1", "VLAN_TAG_FORMAT", "SRC_PORT_SPENDING_TREE", "INBW", - "RMA", "HW_ATTACK_PREVENTION", "PROTO_STORM", "MCAST_SA", - "IGR_ACL_DROP", "IGR_METER_DROP", "DFLT_ACTION_FOR_MISS_ACL_AND_C2SC", "NEW_SA", - "PORT_MOVE", "SA_BLOCKING", "ROUTING_EXCEPTION", "SRC_PORT_SPENDING_TREE_NON_FWDING", - "MAC_LIMIT", "UNKNOW_STORM", "MISS_DROP", "CPU_MAC_DROP", - "DA_BLOCKING", "SRC_PORT_FILTER_BEFORE_EGR_ACL", "VLAN_EGR_FILTER", "SPANNING_TRE", - "PORT_ISOLATION", "OAM_EGRESS_DROP", "MIRROR_ISOLATION", "MAX_LEN_BEFORE_EGR_ACL", - "SRC_PORT_FILTER_BEFORE_MIRROR", "MAX_LEN_BEFORE_MIRROR", "SPECIAL_CONGEST_BEFORE_MIRROR", - "LINK_STATUS_BEFORE_MIRROR", - "WRED_BEFORE_MIRROR", "MAX_LEN_AFTER_MIRROR", "SPECIAL_CONGEST_AFTER_MIRROR", - "LINK_STATUS_AFTER_MIRROR", - "WRED_AFTER_MIRROR" -}; - -const char *rtl930x_drop_cntr[] = { - "OAM_PARSER", "UC_RPF", "DEI_CFI", "MAC_IP_SUBNET_BASED_VLAN", "VLAN_IGR_FILTER", - "L2_UC_MC", "IPV_IP6_MC_BRIDGE", "PTP", "USER_DEF_0_3", "RESERVED", - "RESERVED1", "RESERVED2", "BPDU_RMA", "LACP", "LLDP", - "EAPOL", "XX_RMA", "L3_IPUC_NON_IP", "IP4_IP6_HEADER_ERROR", "L3_BAD_IP", - "L3_DIP_DMAC_MISMATCH", "IP4_IP_OPTION", "IP_UC_MC_ROUTING_LOOK_UP_MISS", "L3_DST_NULL_INTF", - "L3_PBR_NULL_INTF", - "HOST_NULL_INTF", "ROUTE_NULL_INTF", "BRIDGING_ACTION", "ROUTING_ACTION", "IPMC_RPF", - "L2_NEXTHOP_AGE_OUT", "L3_UC_TTL_FAIL", "L3_MC_TTL_FAIL", "L3_UC_MTU_FAIL", "L3_MC_MTU_FAIL", - "L3_UC_ICMP_REDIR", "IP6_MLD_OTHER_ACT", "ND", "IP_MC_RESERVED", "IP6_HBH", - "INVALID_SA", "L2_HASH_FULL", "NEW_SA", "PORT_MOVE_FORBID", "STATIC_PORT_MOVING", - "DYNMIC_PORT_MOVING", "L3_CRC", "MAC_LIMIT", "ATTACK_PREVENT", "ACL_FWD_ACTION", - "OAMPDU", "OAM_MUX", "TRUNK_FILTER", "ACL_DROP", "IGR_BW", - "ACL_METER", "VLAN_ACCEPT_FRAME_TYPE", "MSTP_SRC_DROP_DISABLED_BLOCKING", "SA_BLOCK", "DA_BLOCK", - "STORM_CONTROL", "VLAN_EGR_FILTER", "MSTP_DESTINATION_DROP", "SRC_PORT_FILTER", "PORT_ISOLATION", - "TX_MAX_FRAME_SIZE", "EGR_LINK_STATUS", "MAC_TX_DISABLE", "MAC_PAUSE_FRAME", "MAC_RX_DROP", - "MIRROR_ISOLATE", "RX_FC", "EGR_QUEUE", "HSM_RUNOUT", "ROUTING_DISABLE", "INVALID_L2_NEXTHOP_ENTRY", - "L3_MC_SRC_FLT", "CPUTAG_FLT", "FWD_PMSK_NULL", "IPUC_ROUTING_LOOKUP_MISS", "MY_DEV_DROP", - "STACK_NONUC_BLOCKING_PMSK", "STACK_PORT_NOT_FOUND", "ACL_LOOPBACK_DROP", "IP6_ROUTING_EXT_HEADER" -}; - -const char *rtl931x_drop_cntr[] = { - "ALE_RX_GOOD_PKTS", "RX_MAX_FRAME_SIZE", "MAC_RX_DROP", "OPENFLOW_IP_MPLS_TTL", "OPENFLOW_TBL_MISS", - "IGR_BW", "SPECIAL_CONGEST", "EGR_QUEUE", "RESERVED", "EGR_LINK_STATUS", "STACK_UCAST_NONUCAST_TTL", /* 10 */ - "STACK_NONUC_BLOCKING_PMSK", "L2_CRC", "SRC_PORT_FILTER", "PARSER_PACKET_TOO_LONG", "PARSER_MALFORM_PACKET", - "MPLS_OVER_2_LBL", "EACL_METER", "IACL_METER", "PROTO_STORM", "INVALID_CAPWAP_HEADER", /* 20 */ - "MAC_IP_SUBNET_BASED_VLAN", "OAM_PARSER", "UC_MC_RPF", "IP_MAC_BINDING_MATCH_MISMATCH", "SA_BLOCK", - "TUNNEL_IP_ADDRESS_CHECK", "EACL_DROP", "IACL_DROP", "ATTACK_PREVENT", "SYSTEM_PORT_LIMIT_LEARN", /* 30 */ - "OAMPDU", "CCM_RX", "CFM_UNKNOWN_TYPE", "LBM_LBR_LTM_LTR", "Y_1731", "VLAN_LIMIT_LEARN", - "VLAN_ACCEPT_FRAME_TYPE", "CFI_1", "STATIC_DYNAMIC_PORT_MOVING", "PORT_MOVE_FORBID", /* 40 */ - "L3_CRC", "BPDU_PTP_LLDP_EAPOL_RMA", "MSTP_SRC_DROP_DISABLED_BLOCKING", "INVALID_SA", "NEW_SA", - "VLAN_IGR_FILTER", "IGR_VLAN_CONVERT", "GRATUITOUS_ARP", "MSTP_SRC_DROP", "L2_HASH_FULL", /* 50 */ - "MPLS_UNKNOWN_LBL", "L3_IPUC_NON_IP", "TTL", "MTU", "ICMP_REDIRECT", "STORM_CONTROL", "L3_DIP_DMAC_MISMATCH", - "IP4_IP_OPTION", "IP6_HBH_EXT_HEADER", "IP4_IP6_HEADER_ERROR", /* 60 */ - "ROUTING_IP_ADDR_CHECK", "ROUTING_EXCEPTION", "DA_BLOCK", "OAM_MUX", "PORT_ISOLATION", "VLAN_EGR_FILTER", - "MIRROR_ISOLATE", "MSTP_DESTINATION_DROP", "L2_MC_BRIDGE", "IP_UC_MC_ROUTING_LOOK_UP_MISS", /* 70 */ - "L2_UC", "L2_MC", "IP4_MC", "IP6_MC", "L3_UC_MC_ROUTE", "UNKNOWN_L2_UC_FLPM", "BC_FLPM", - "VLAN_PRO_UNKNOWN_L2_MC_FLPM", "VLAN_PRO_UNKNOWN_IP4_MC_FLPM", "VLAN_PROFILE_UNKNOWN_IP6_MC_FLPM", /* 80 */ -}; - -static ssize_t rtl838x_common_read(char __user *buffer, size_t count, - loff_t *ppos, unsigned int value) -{ - char *buf; - ssize_t len; - - if (*ppos != 0) - return 0; - - buf = kasprintf(GFP_KERNEL, "0x%08x\n", value); - if (!buf) - return -ENOMEM; - - if (count < strlen(buf)) { - kfree(buf); - return -ENOSPC; - } - - len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf)); - kfree(buf); - - return len; -} - -static ssize_t rtl838x_common_write(const char __user *buffer, size_t count, - loff_t *ppos, unsigned int *value) -{ - char b[32]; - ssize_t len; - int ret; - - if (*ppos != 0) - return -EINVAL; - - if (count >= sizeof(b)) - return -ENOSPC; - - len = simple_write_to_buffer(b, sizeof(b) - 1, ppos, - buffer, count); - if (len < 0) - return len; - - b[len] = '\0'; - ret = kstrtouint(b, 16, value); - if (ret) - return -EIO; - - return len; -} - -static ssize_t stp_state_read(struct file *filp, char __user *buffer, size_t count, - loff_t *ppos) -{ - struct rtl838x_port *p = filp->private_data; - struct dsa_switch *ds = p->dp->ds; - int value = rtl83xx_port_get_stp_state(ds->priv, p->dp->index); - - if (value < 0) - return -EINVAL; - - return rtl838x_common_read(buffer, count, ppos, (u32)value); -} - -static ssize_t stp_state_write(struct file *filp, const char __user *buffer, - size_t count, loff_t *ppos) -{ - struct rtl838x_port *p = filp->private_data; - u32 value; - size_t res = rtl838x_common_write(buffer, count, ppos, &value); - if (res < 0) - return res; - - rtl83xx_port_stp_state_set(p->dp->ds, p->dp->index, (u8)value); - - return res; -} - -static const struct file_operations stp_state_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = stp_state_read, - .write = stp_state_write, -}; - -static ssize_t drop_counter_read(struct file *filp, char __user *buffer, size_t count, - loff_t *ppos) -{ - struct rtl838x_switch_priv *priv = filp->private_data; - const char **d; - u32 v; - char *buf; - int n = 0, len, offset; - int num; - - switch (priv->family_id) { - case RTL8380_FAMILY_ID: - d = rtl838x_drop_cntr; - offset = RTL838X_STAT_PRVTE_DROP_COUNTERS; - num = 40; - break; - case RTL8390_FAMILY_ID: - d = rtl839x_drop_cntr; - offset = RTL839X_STAT_PRVTE_DROP_COUNTERS; - num = 45; - break; - case RTL9300_FAMILY_ID: - d = rtl930x_drop_cntr; - offset = RTL930X_STAT_PRVTE_DROP_COUNTERS; - num = 85; - break; - case RTL9310_FAMILY_ID: - d = rtl931x_drop_cntr; - offset = RTL931X_STAT_PRVTE_DROP_COUNTERS; - num = 81; - break; - } - - buf = kmalloc(30 * num, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - for (int i = 0; i < num; i++) { - v = sw_r32(offset + (i << 2)) & 0xffff; - n += sprintf(buf + n, "%s: %d\n", d[i], v); - } - - if (count < strlen(buf)) { - kfree(buf); - return -ENOSPC; - } - - len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf)); - kfree(buf); - - return len; -} - -static const struct file_operations drop_counter_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = drop_counter_read, -}; - -static void l2_table_print_entry(struct seq_file *m, struct rtl838x_switch_priv *priv, - struct rtl838x_l2_entry *e) -{ - u64 portmask; - - if (e->type == L2_UNICAST) { - seq_puts(m, "L2_UNICAST\n"); - - seq_printf(m, " mac %02x:%02x:%02x:%02x:%02x:%02x vid %u rvid %u\n", - e->mac[0], e->mac[1], e->mac[2], e->mac[3], e->mac[4], e->mac[5], - e->vid, e->rvid); - - seq_printf(m, " port %d age %d", e->port, e->age); - if (e->is_static) - seq_puts(m, " static"); - if (e->block_da) - seq_puts(m, " block_da"); - if (e->block_sa) - seq_puts(m, " block_sa"); - if (e->suspended) - seq_puts(m, " suspended"); - if (e->next_hop) - seq_printf(m, " next_hop route_id %u", e->nh_route_id); - seq_puts(m, "\n"); - - } else { - if (e->type == L2_MULTICAST) { - seq_puts(m, "L2_MULTICAST\n"); - - seq_printf(m, " mac %02x:%02x:%02x:%02x:%02x:%02x vid %u rvid %u\n", - e->mac[0], e->mac[1], e->mac[2], e->mac[3], e->mac[4], e->mac[5], - e->vid, e->rvid); - } - - if (e->type == IP4_MULTICAST || e->type == IP6_MULTICAST) { - seq_puts(m, (e->type == IP4_MULTICAST) ? - "IP4_MULTICAST\n" : "IP6_MULTICAST\n"); - - seq_printf(m, " gip %08x sip %08x vid %u rvid %u\n", - e->mc_gip, e->mc_sip, e->vid, e->rvid); - } - - portmask = priv->r->read_mcast_pmask(e->mc_portmask_index); - seq_printf(m, " index %u ports", e->mc_portmask_index); - for (int i = 0; i < 64; i++) { - if (portmask & BIT_ULL(i)) - seq_printf(m, " %d", i); - } - seq_puts(m, "\n"); - } - - seq_puts(m, "\n"); -} - -static int l2_table_show(struct seq_file *m, void *v) -{ - struct rtl838x_switch_priv *priv = m->private; - struct rtl838x_l2_entry e; - int bucket, index; - - mutex_lock(&priv->reg_mutex); - - for (int i = 0; i < priv->fib_entries; i++) { - bucket = i >> 2; - index = i & 0x3; - priv->r->read_l2_entry_using_hash(bucket, index, &e); - - if (!e.valid) - continue; - - seq_printf(m, "Hash table bucket %d index %d ", bucket, index); - l2_table_print_entry(m, priv, &e); - - if (!((i + 1) % 64)) - cond_resched(); - } - - for (int i = 0; i < 64; i++) { - priv->r->read_cam(i, &e); - - if (!e.valid) - continue; - - seq_printf(m, "CAM index %d ", i); - l2_table_print_entry(m, priv, &e); - } - - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int l2_table_open(struct inode *inode, struct file *filp) -{ - return single_open(filp, l2_table_show, inode->i_private); -} - -static const struct file_operations l2_table_fops = { - .owner = THIS_MODULE, - .open = l2_table_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static ssize_t age_out_read(struct file *filp, char __user *buffer, size_t count, - loff_t *ppos) -{ - struct rtl838x_port *p = filp->private_data; - struct dsa_switch *ds = p->dp->ds; - struct rtl838x_switch_priv *priv = ds->priv; - int value = sw_r32(priv->r->l2_port_aging_out); - - if (value < 0) - return -EINVAL; - - return rtl838x_common_read(buffer, count, ppos, (u32)value); -} - -static ssize_t age_out_write(struct file *filp, const char __user *buffer, - size_t count, loff_t *ppos) -{ - struct rtl838x_port *p = filp->private_data; - u32 value; - size_t res = rtl838x_common_write(buffer, count, ppos, &value); - if (res < 0) - return res; - - rtl83xx_fast_age(p->dp->ds, p->dp->index); - - return res; -} - -static const struct file_operations age_out_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = age_out_read, - .write = age_out_write, -}; - -static ssize_t port_egress_rate_read(struct file *filp, char __user *buffer, size_t count, - loff_t *ppos) -{ - struct rtl838x_port *p = filp->private_data; - struct dsa_switch *ds = p->dp->ds; - struct rtl838x_switch_priv *priv = ds->priv; - int value; - if (priv->family_id == RTL8380_FAMILY_ID) - value = rtl838x_get_egress_rate(priv, p->dp->index); - else - value = rtl839x_get_egress_rate(priv, p->dp->index); - - if (value < 0) - return -EINVAL; - - return rtl838x_common_read(buffer, count, ppos, (u32)value); -} - -static ssize_t port_egress_rate_write(struct file *filp, const char __user *buffer, - size_t count, loff_t *ppos) -{ - struct rtl838x_port *p = filp->private_data; - struct dsa_switch *ds = p->dp->ds; - struct rtl838x_switch_priv *priv = ds->priv; - u32 value; - size_t res = rtl838x_common_write(buffer, count, ppos, &value); - if (res < 0) - return res; - - if (priv->family_id == RTL8380_FAMILY_ID) - rtl838x_set_egress_rate(priv, p->dp->index, value); - else - rtl839x_set_egress_rate(priv, p->dp->index, value); - - return res; -} - -static const struct file_operations port_egress_fops = { - .owner = THIS_MODULE, - .open = simple_open, - .read = port_egress_rate_read, - .write = port_egress_rate_write, -}; - - -static const struct debugfs_reg32 port_ctrl_regs[] = { - { .name = "port_isolation", .offset = RTL838X_PORT_ISO_CTRL(0), }, - { .name = "mac_force_mode", .offset = RTL838X_MAC_FORCE_MODE_CTRL, }, -}; - -void rtl838x_dbgfs_cleanup(struct rtl838x_switch_priv *priv) -{ - debugfs_remove_recursive(priv->dbgfs_dir); - -/* kfree(priv->dbgfs_entries); */ -} - -static int rtl838x_dbgfs_port_init(struct dentry *parent, struct rtl838x_switch_priv *priv, - int port) -{ - struct dentry *port_dir; - struct debugfs_regset32 *port_ctrl_regset; - - port_dir = debugfs_create_dir(priv->ports[port].dp->name, parent); - - if (priv->family_id == RTL8380_FAMILY_ID) { - debugfs_create_x32("storm_rate_uc", 0644, port_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_STORM_CTRL_PORT_UC(port))); - - debugfs_create_x32("storm_rate_mc", 0644, port_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_STORM_CTRL_PORT_MC(port))); - - debugfs_create_x32("storm_rate_bc", 0644, port_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_STORM_CTRL_PORT_BC(port))); - } else { - debugfs_create_x32("storm_rate_uc", 0644, port_dir, - (u32 *)(RTL838X_SW_BASE + RTL839X_STORM_CTRL_PORT_UC_0(port))); - - debugfs_create_x32("storm_rate_mc", 0644, port_dir, - (u32 *)(RTL838X_SW_BASE + RTL839X_STORM_CTRL_PORT_MC_0(port))); - - debugfs_create_x32("storm_rate_bc", 0644, port_dir, - (u32 *)(RTL838X_SW_BASE + RTL839X_STORM_CTRL_PORT_BC_0(port))); - } - - debugfs_create_u32("id", 0444, port_dir, (u32 *)&priv->ports[port].dp->index); - - port_ctrl_regset = devm_kzalloc(priv->dev, sizeof(*port_ctrl_regset), GFP_KERNEL); - if (!port_ctrl_regset) - return -ENOMEM; - - port_ctrl_regset->regs = port_ctrl_regs; - port_ctrl_regset->nregs = ARRAY_SIZE(port_ctrl_regs); - port_ctrl_regset->base = (void *)(RTL838X_SW_BASE + (port << 2)); - debugfs_create_regset32("port_ctrl", 0400, port_dir, port_ctrl_regset); - - debugfs_create_file("stp_state", 0600, port_dir, &priv->ports[port], &stp_state_fops); - debugfs_create_file("age_out", 0600, port_dir, &priv->ports[port], &age_out_fops); - debugfs_create_file("port_egress_rate", 0600, port_dir, &priv->ports[port], - &port_egress_fops); - return 0; -} - -static int rtl838x_dbgfs_leds(struct dentry *parent, struct rtl838x_switch_priv *priv) -{ - struct dentry *led_dir; - - led_dir = debugfs_create_dir("led", parent); - - if (priv->family_id == RTL8380_FAMILY_ID) { - debugfs_create_x32("led_glb_ctrl", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_LED_GLB_CTRL)); - debugfs_create_x32("led_mode_sel", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_LED_MODE_SEL)); - debugfs_create_x32("led_mode_ctrl", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_LED_MODE_CTRL)); - debugfs_create_x32("led_p_en_ctrl", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_LED_P_EN_CTRL)); - debugfs_create_x32("led_sw_ctrl", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_LED_SW_CTRL)); - debugfs_create_x32("led0_sw_p_en_ctrl", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_LED0_SW_P_EN_CTRL)); - debugfs_create_x32("led1_sw_p_en_ctrl", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_LED1_SW_P_EN_CTRL)); - debugfs_create_x32("led2_sw_p_en_ctrl", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_LED2_SW_P_EN_CTRL)); - for (int p = 0; p < 28; p++) { - char led_sw_p_ctrl_name[20]; - - snprintf(led_sw_p_ctrl_name, sizeof(led_sw_p_ctrl_name), - "led_sw_p_ctrl.%02d", p); - debugfs_create_x32(led_sw_p_ctrl_name, 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_LED_SW_P_CTRL_PORT(p))); - } - } else if (priv->family_id == RTL8390_FAMILY_ID) { - char port_led_name[20]; - - debugfs_create_x32("led_glb_ctrl", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_GLB_CTRL)); - debugfs_create_x32("led_set_2_3", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_SET_2_3_CTRL)); - debugfs_create_x32("led_set_0_1", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_SET_0_1_CTRL)); - for (int p = 0; p < 4; p++) { - snprintf(port_led_name, sizeof(port_led_name), "led_copr_set_sel.%1d", p); - debugfs_create_x32(port_led_name, 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_COPR_SET_SEL_CTRL(p << 4))); - snprintf(port_led_name, sizeof(port_led_name), "led_fib_set_sel.%1d", p); - debugfs_create_x32(port_led_name, 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_FIB_SET_SEL_CTRL(p << 4))); - } - debugfs_create_x32("led_copr_pmask_ctrl_0", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_COPR_PMASK_CTRL(0))); - debugfs_create_x32("led_copr_pmask_ctrl_1", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_COPR_PMASK_CTRL(32))); - debugfs_create_x32("led_fib_pmask_ctrl_0", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_FIB_PMASK_CTRL(0))); - debugfs_create_x32("led_fib_pmask_ctrl_1", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_FIB_PMASK_CTRL(32))); - debugfs_create_x32("led_combo_ctrl_0", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_COMBO_CTRL(0))); - debugfs_create_x32("led_combo_ctrl_1", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_COMBO_CTRL(32))); - debugfs_create_x32("led_sw_ctrl", 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_SW_CTRL)); - for (int p = 0; p < 5; p++) { - snprintf(port_led_name, sizeof(port_led_name), "led_sw_p_en_ctrl.%1d", p); - debugfs_create_x32(port_led_name, 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_SW_P_EN_CTRL(p * 10))); - } - for (int p = 0; p < 28; p++) { - snprintf(port_led_name, sizeof(port_led_name), "led_sw_p_ctrl.%02d", p); - debugfs_create_x32(port_led_name, 0644, led_dir, - (u32 *)(RTL838X_SW_BASE + RTL8390_LED_SW_P_CTRL(p))); - } - } - return 0; -} - -void rtl838x_dbgfs_init(struct rtl838x_switch_priv *priv) -{ - struct dentry *rtl838x_dir; - struct dentry *port_dir; - struct dentry *mirror_dir; - struct debugfs_regset32 *port_ctrl_regset; - int ret; - char lag_name[10]; - char mirror_name[10]; - - pr_info("%s called\n", __func__); - rtl838x_dir = debugfs_lookup(RTL838X_DRIVER_NAME, NULL); - if (!rtl838x_dir) - rtl838x_dir = debugfs_create_dir(RTL838X_DRIVER_NAME, NULL); - - priv->dbgfs_dir = rtl838x_dir; - - debugfs_create_x32("soc", 0444, rtl838x_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_MODEL_NAME_INFO)); - - /* Create one directory per port */ - for (int i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) { - ret = rtl838x_dbgfs_port_init(rtl838x_dir, priv, i); - if (ret) - goto err; - } - } - - /* Create directory for CPU-port */ - port_dir = debugfs_create_dir("cpu_port", rtl838x_dir); - port_ctrl_regset = devm_kzalloc(priv->dev, sizeof(*port_ctrl_regset), GFP_KERNEL); - if (!port_ctrl_regset) { - ret = -ENOMEM; - goto err; - } - - port_ctrl_regset->regs = port_ctrl_regs; - port_ctrl_regset->nregs = ARRAY_SIZE(port_ctrl_regs); - port_ctrl_regset->base = (void *)(RTL838X_SW_BASE + (priv->cpu_port << 2)); - debugfs_create_regset32("port_ctrl", 0400, port_dir, port_ctrl_regset); - debugfs_create_u8("id", 0444, port_dir, &priv->cpu_port); - - /* Create entries for LAGs */ - for (int i = 0; i < priv->n_lags; i++) { - snprintf(lag_name, sizeof(lag_name), "lag.%02d", i); - if (priv->family_id == RTL8380_FAMILY_ID) - debugfs_create_x32(lag_name, 0644, rtl838x_dir, - (u32 *)(RTL838X_SW_BASE + priv->r->trk_mbr_ctr(i))); - else - debugfs_create_x64(lag_name, 0644, rtl838x_dir, - (u64 *)(RTL838X_SW_BASE + priv->r->trk_mbr_ctr(i))); - } - - /* Create directories for mirror groups */ - for (int i = 0; i < 4; i++) { - snprintf(mirror_name, sizeof(mirror_name), "mirror.%1d", i); - mirror_dir = debugfs_create_dir(mirror_name, rtl838x_dir); - if (priv->family_id == RTL8380_FAMILY_ID) { - debugfs_create_x32("ctrl", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_MIR_CTRL + i * 4)); - debugfs_create_x32("ingress_pm", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + priv->r->mir_spm + i * 4)); - debugfs_create_x32("egress_pm", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + priv->r->mir_dpm + i * 4)); - debugfs_create_x32("qid", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_MIR_QID_CTRL(i))); - debugfs_create_x32("rspan_vlan", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_VLAN_CTRL(i))); - debugfs_create_x32("rspan_vlan_mac", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_VLAN_CTRL_MAC(i))); - debugfs_create_x32("rspan_tx", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_TX_CTRL)); - debugfs_create_x32("rspan_tx_tag_rm", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_TX_TAG_RM_CTRL)); - debugfs_create_x32("rspan_tx_tag_en", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_MIR_RSPAN_TX_TAG_EN_CTRL)); - } else { - debugfs_create_x32("ctrl", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL839X_MIR_CTRL + i * 4)); - debugfs_create_x64("ingress_pm", 0644, mirror_dir, - (u64 *)(RTL838X_SW_BASE + priv->r->mir_spm + i * 8)); - debugfs_create_x64("egress_pm", 0644, mirror_dir, - (u64 *)(RTL838X_SW_BASE + priv->r->mir_dpm + i * 8)); - debugfs_create_x32("rspan_vlan", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL839X_MIR_RSPAN_VLAN_CTRL(i))); - debugfs_create_x32("rspan_tx", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL839X_MIR_RSPAN_TX_CTRL)); - debugfs_create_x32("rspan_tx_tag_rm", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL839X_MIR_RSPAN_TX_TAG_RM_CTRL)); - debugfs_create_x32("rspan_tx_tag_en", 0644, mirror_dir, - (u32 *)(RTL838X_SW_BASE + RTL839X_MIR_RSPAN_TX_TAG_EN_CTRL)); - debugfs_create_x64("sample_rate", 0644, mirror_dir, - (u64 *)(RTL838X_SW_BASE + RTL839X_MIR_SAMPLE_RATE_CTRL)); - } - } - - if (priv->family_id == RTL8380_FAMILY_ID) - debugfs_create_x32("bpdu_flood_mask", 0644, rtl838x_dir, - (u32 *)(RTL838X_SW_BASE + priv->r->rma_bpdu_fld_pmask)); - else - debugfs_create_x64("bpdu_flood_mask", 0644, rtl838x_dir, - (u64 *)(RTL838X_SW_BASE + priv->r->rma_bpdu_fld_pmask)); - - if (priv->family_id == RTL8380_FAMILY_ID) - debugfs_create_x32("vlan_ctrl", 0644, rtl838x_dir, - (u32 *)(RTL838X_SW_BASE + RTL838X_VLAN_CTRL)); - else - debugfs_create_x32("vlan_ctrl", 0644, rtl838x_dir, - (u32 *)(RTL838X_SW_BASE + RTL839X_VLAN_CTRL)); - - ret = rtl838x_dbgfs_leds(rtl838x_dir, priv); - if (ret) - goto err; - - debugfs_create_file("drop_counters", 0400, rtl838x_dir, priv, &drop_counter_fops); - - debugfs_create_file("l2_table", 0400, rtl838x_dir, priv, &l2_table_fops); - - return; -err: - rtl838x_dbgfs_cleanup(priv); -} - -void rtl930x_dbgfs_init(struct rtl838x_switch_priv *priv) -{ - struct dentry *dbg_dir; - - pr_info("%s called\n", __func__); - dbg_dir = debugfs_lookup(RTL838X_DRIVER_NAME, NULL); - if (!dbg_dir) - dbg_dir = debugfs_create_dir(RTL838X_DRIVER_NAME, NULL); - - priv->dbgfs_dir = dbg_dir; - - debugfs_create_file("drop_counters", 0400, dbg_dir, priv, &drop_counter_fops); - - debugfs_create_file("l2_table", 0400, dbg_dir, priv, &l2_table_fops); -} diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c deleted file mode 100644 index ee87de8e07..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c +++ /dev/null @@ -1,2237 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include -#include - -#include "rtl83xx.h" - -extern struct rtl83xx_soc_info soc_info; - -static void rtl83xx_init_stats(struct rtl838x_switch_priv *priv) -{ - mutex_lock(&priv->reg_mutex); - - /* Enable statistics module: all counters plus debug. - * On RTL839x all counters are enabled by default - */ - if (priv->family_id == RTL8380_FAMILY_ID) - sw_w32_mask(0, 3, RTL838X_STAT_CTRL); - - /* Reset statistics counters */ - sw_w32_mask(0, 1, priv->r->stat_rst); - - mutex_unlock(&priv->reg_mutex); -} - -static void rtl83xx_enable_phy_polling(struct rtl838x_switch_priv *priv) -{ - u64 v = 0; - - msleep(1000); - /* Enable all ports with a PHY, including the SFP-ports */ - for (int i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) - v |= BIT_ULL(i); - } - - pr_info("%s: %16llx\n", __func__, v); - priv->r->set_port_reg_le(v, priv->r->smi_poll_ctrl); - - /* PHY update complete, there is no global PHY polling enable bit on the 9300 */ - if (priv->family_id == RTL8390_FAMILY_ID) - sw_w32_mask(0, BIT(7), RTL839X_SMI_GLB_CTRL); - else if(priv->family_id == RTL9300_FAMILY_ID) - sw_w32_mask(0, 0x8000, RTL838X_SMI_GLB_CTRL); -} - -const struct rtl83xx_mib_desc rtl83xx_mib[] = { - MIB_DESC(2, 0xf8, "ifInOctets"), - MIB_DESC(2, 0xf0, "ifOutOctets"), - MIB_DESC(1, 0xec, "dot1dTpPortInDiscards"), - MIB_DESC(1, 0xe8, "ifInUcastPkts"), - MIB_DESC(1, 0xe4, "ifInMulticastPkts"), - MIB_DESC(1, 0xe0, "ifInBroadcastPkts"), - MIB_DESC(1, 0xdc, "ifOutUcastPkts"), - MIB_DESC(1, 0xd8, "ifOutMulticastPkts"), - MIB_DESC(1, 0xd4, "ifOutBroadcastPkts"), - MIB_DESC(1, 0xd0, "ifOutDiscards"), - MIB_DESC(1, 0xcc, ".3SingleCollisionFrames"), - MIB_DESC(1, 0xc8, ".3MultipleCollisionFrames"), - MIB_DESC(1, 0xc4, ".3DeferredTransmissions"), - MIB_DESC(1, 0xc0, ".3LateCollisions"), - MIB_DESC(1, 0xbc, ".3ExcessiveCollisions"), - MIB_DESC(1, 0xb8, ".3SymbolErrors"), - MIB_DESC(1, 0xb4, ".3ControlInUnknownOpcodes"), - MIB_DESC(1, 0xb0, ".3InPauseFrames"), - MIB_DESC(1, 0xac, ".3OutPauseFrames"), - MIB_DESC(1, 0xa8, "DropEvents"), - MIB_DESC(1, 0xa4, "tx_BroadcastPkts"), - MIB_DESC(1, 0xa0, "tx_MulticastPkts"), - MIB_DESC(1, 0x9c, "CRCAlignErrors"), - MIB_DESC(1, 0x98, "tx_UndersizePkts"), - MIB_DESC(1, 0x94, "rx_UndersizePkts"), - MIB_DESC(1, 0x90, "rx_UndersizedropPkts"), - MIB_DESC(1, 0x8c, "tx_OversizePkts"), - MIB_DESC(1, 0x88, "rx_OversizePkts"), - MIB_DESC(1, 0x84, "Fragments"), - MIB_DESC(1, 0x80, "Jabbers"), - MIB_DESC(1, 0x7c, "Collisions"), - MIB_DESC(1, 0x78, "tx_Pkts64Octets"), - MIB_DESC(1, 0x74, "rx_Pkts64Octets"), - MIB_DESC(1, 0x70, "tx_Pkts65to127Octets"), - MIB_DESC(1, 0x6c, "rx_Pkts65to127Octets"), - MIB_DESC(1, 0x68, "tx_Pkts128to255Octets"), - MIB_DESC(1, 0x64, "rx_Pkts128to255Octets"), - MIB_DESC(1, 0x60, "tx_Pkts256to511Octets"), - MIB_DESC(1, 0x5c, "rx_Pkts256to511Octets"), - MIB_DESC(1, 0x58, "tx_Pkts512to1023Octets"), - MIB_DESC(1, 0x54, "rx_Pkts512to1023Octets"), - MIB_DESC(1, 0x50, "tx_Pkts1024to1518Octets"), - MIB_DESC(1, 0x4c, "rx_StatsPkts1024to1518Octets"), - MIB_DESC(1, 0x48, "tx_Pkts1519toMaxOctets"), - MIB_DESC(1, 0x44, "rx_Pkts1519toMaxOctets"), - MIB_DESC(1, 0x40, "rxMacDiscards") -}; - - -/* DSA callbacks */ - - -static enum dsa_tag_protocol rtl83xx_get_tag_protocol(struct dsa_switch *ds, - int port, - enum dsa_tag_protocol mprot) -{ - /* The switch does not tag the frames, instead internally the header - * structure for each packet is tagged accordingly. - */ - return DSA_TAG_PROTO_TRAILER; -} - -static void rtl83xx_vlan_set_pvid(struct rtl838x_switch_priv *priv, - int port, int pvid) -{ - /* Set both inner and outer PVID of the port */ - priv->r->vlan_port_pvid_set(port, PBVLAN_TYPE_INNER, pvid); - priv->r->vlan_port_pvid_set(port, PBVLAN_TYPE_OUTER, pvid); - priv->r->vlan_port_pvidmode_set(port, PBVLAN_TYPE_INNER, - PBVLAN_MODE_UNTAG_AND_PRITAG); - priv->r->vlan_port_pvidmode_set(port, PBVLAN_TYPE_OUTER, - PBVLAN_MODE_UNTAG_AND_PRITAG); - - priv->ports[port].pvid = pvid; -} - -/* Initialize all VLANS */ -static void rtl83xx_vlan_setup(struct rtl838x_switch_priv *priv) -{ - struct rtl838x_vlan_info info; - - pr_info("In %s\n", __func__); - - priv->r->vlan_profile_setup(0); - priv->r->vlan_profile_setup(1); - pr_info("UNKNOWN_MC_PMASK: %016llx\n", priv->r->read_mcast_pmask(UNKNOWN_MC_PMASK)); - priv->r->vlan_profile_dump(0); - - info.fid = 0; /* Default Forwarding ID / MSTI */ - info.hash_uc_fid = false; /* Do not build the L2 lookup hash with FID, but VID */ - info.hash_mc_fid = false; /* Do the same for Multicast packets */ - info.profile_id = 0; /* Use default Vlan Profile 0 */ - info.tagged_ports = 0; /* Initially no port members */ - if (priv->family_id == RTL9310_FAMILY_ID) { - info.if_id = 0; - info.multicast_grp_mask = 0; - info.l2_tunnel_list_id = -1; - } - - /* Initialize normal VLANs 1-4095 */ - for (int i = 1; i < MAX_VLANS; i ++) - priv->r->vlan_set_tagged(i, &info); - - /* - * Initialize the special VLAN 0 and reset PVIDs. The CPU port PVID - * is applied to packets from the CPU for untagged destinations, - * regardless if the actual ingress VID. Any port with untagged - * egress VLAN(s) must therefore be a member of VLAN 0 to support - * CPU port as ingress when VLAN filtering is enabled. - */ - for (int i = 0; i <= priv->cpu_port; i++) { - rtl83xx_vlan_set_pvid(priv, i, 0); - info.tagged_ports |= BIT_ULL(i); - } - priv->r->vlan_set_tagged(0, &info); - - /* Set forwarding action based on inner VLAN tag */ - for (int i = 0; i < priv->cpu_port; i++) - priv->r->vlan_fwd_on_inner(i, true); -} - -static void rtl83xx_setup_bpdu_traps(struct rtl838x_switch_priv *priv) -{ - for (int i = 0; i < priv->cpu_port; i++) - priv->r->set_receive_management_action(i, BPDU, TRAP2CPU); -} - -static void rtl83xx_setup_lldp_traps(struct rtl838x_switch_priv *priv) -{ - for (int i = 0; i < priv->cpu_port; i++) - priv->r->set_receive_management_action(i, LLDP, TRAP2CPU); -} - -static void rtl83xx_port_set_salrn(struct rtl838x_switch_priv *priv, - int port, bool enable) -{ - int shift = SALRN_PORT_SHIFT(port); - int val = enable ? SALRN_MODE_HARDWARE : SALRN_MODE_DISABLED; - - sw_w32_mask(SALRN_MODE_MASK << shift, val << shift, - priv->r->l2_port_new_salrn(port)); -} - -static int rtl83xx_setup(struct dsa_switch *ds) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_debug("%s called\n", __func__); - - /* Disable MAC polling the PHY so that we can start configuration */ - priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl); - - for (int i = 0; i < ds->num_ports; i++) - priv->ports[i].enable = false; - priv->ports[priv->cpu_port].enable = true; - - /* Configure ports so they are disabled by default, but once enabled - * they will work in isolated mode (only traffic between port and CPU). - */ - for (int i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) { - priv->ports[i].pm = BIT_ULL(priv->cpu_port); - priv->r->traffic_set(i, BIT_ULL(i)); - } - } - priv->r->traffic_set(priv->cpu_port, BIT_ULL(priv->cpu_port)); - - /* For standalone ports, forward packets even if a static fdb - * entry for the source address exists on another port. - */ - if (priv->r->set_static_move_action) { - for (int i = 0; i <= priv->cpu_port; i++) - priv->r->set_static_move_action(i, true); - } - - if (priv->family_id == RTL8380_FAMILY_ID) - rtl838x_print_matrix(); - else - rtl839x_print_matrix(); - - rtl83xx_init_stats(priv); - - rtl83xx_vlan_setup(priv); - - rtl83xx_setup_bpdu_traps(priv); - rtl83xx_setup_lldp_traps(priv); - - ds->configure_vlan_while_not_filtering = true; - - priv->r->l2_learning_setup(); - - rtl83xx_port_set_salrn(priv, priv->cpu_port, false); - ds->assisted_learning_on_cpu_port = true; - - /* Make sure all frames sent to the switch's MAC are trapped to the CPU-port - * 0: FWD, 1: DROP, 2: TRAP2CPU - */ - if (priv->family_id == RTL8380_FAMILY_ID) - sw_w32(0x2, RTL838X_SPCL_TRAP_SWITCH_MAC_CTRL); - else - sw_w32(0x2, RTL839X_SPCL_TRAP_SWITCH_MAC_CTRL); - - /* Enable MAC Polling PHY again */ - rtl83xx_enable_phy_polling(priv); - pr_debug("Please wait until PHY is settled\n"); - msleep(1000); - priv->r->pie_init(priv); - - return 0; -} - -static int rtl93xx_setup(struct dsa_switch *ds) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("%s called\n", __func__); - - /* Disable MAC polling the PHY so that we can start configuration */ - if (priv->family_id == RTL9300_FAMILY_ID) - sw_w32(0, RTL930X_SMI_POLL_CTRL); - - if (priv->family_id == RTL9310_FAMILY_ID) { - sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL); - sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL + 4); - } - - /* Disable all ports except CPU port */ - for (int i = 0; i < ds->num_ports; i++) - priv->ports[i].enable = false; - priv->ports[priv->cpu_port].enable = true; - - /* Configure ports so they are disabled by default, but once enabled - * they will work in isolated mode (only traffic between port and CPU). - */ - for (int i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) { - priv->ports[i].pm = BIT_ULL(priv->cpu_port); - priv->r->traffic_set(i, BIT_ULL(i)); - } - } - priv->r->traffic_set(priv->cpu_port, BIT_ULL(priv->cpu_port)); - - rtl930x_print_matrix(); - - /* TODO: Initialize statistics */ - - rtl83xx_vlan_setup(priv); - - ds->configure_vlan_while_not_filtering = true; - - priv->r->l2_learning_setup(); - - rtl83xx_port_set_salrn(priv, priv->cpu_port, false); - ds->assisted_learning_on_cpu_port = true; - - rtl83xx_enable_phy_polling(priv); - - priv->r->pie_init(priv); - - priv->r->led_init(priv); - - return 0; -} - -static int rtl93xx_get_sds(struct phy_device *phydev) -{ - struct device *dev = &phydev->mdio.dev; - struct device_node *dn; - u32 sds_num; - - if (!dev) - return -1; - if (dev->of_node) { - dn = dev->of_node; - if (of_property_read_u32(dn, "sds", &sds_num)) - sds_num = -1; - } else { - dev_err(dev, "No DT node.\n"); - return -1; - } - - return sds_num; -} - -static void rtl83xx_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - - pr_debug("In %s port %d, state is %d", __func__, port, state->interface); - - if (!phy_interface_mode_is_rgmii(state->interface) && - state->interface != PHY_INTERFACE_MODE_NA && - state->interface != PHY_INTERFACE_MODE_1000BASEX && - state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_REVMII && - state->interface != PHY_INTERFACE_MODE_GMII && - state->interface != PHY_INTERFACE_MODE_QSGMII && - state->interface != PHY_INTERFACE_MODE_INTERNAL && - state->interface != PHY_INTERFACE_MODE_SGMII) { - bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); - dev_err(ds->dev, - "Unsupported interface: %d for port %d\n", - state->interface, port); - return; - } - - /* Allow all the expected bits */ - phylink_set(mask, Autoneg); - phylink_set_port_modes(mask); - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - - /* With the exclusion of MII and Reverse MII, we support Gigabit, - * including Half duplex - */ - if (state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_REVMII) { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseT_Half); - } - - /* On both the 8380 and 8382, ports 24-27 are SFP ports */ - if (port >= 24 && port <= 27 && priv->family_id == RTL8380_FAMILY_ID) - phylink_set(mask, 1000baseX_Full); - - /* On the RTL839x family of SoCs, ports 48 to 51 are SFP ports */ - if (port >= 48 && port <= 51 && priv->family_id == RTL8390_FAMILY_ID) - phylink_set(mask, 1000baseX_Full); - - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - - bitmap_and(supported, supported, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_and(state->advertising, state->advertising, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); -} - -static void rtl93xx_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - - pr_debug("In %s port %d, state is %d (%s)", __func__, port, state->interface, - phy_modes(state->interface)); - - if (!phy_interface_mode_is_rgmii(state->interface) && - state->interface != PHY_INTERFACE_MODE_NA && - state->interface != PHY_INTERFACE_MODE_1000BASEX && - state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_REVMII && - state->interface != PHY_INTERFACE_MODE_GMII && - state->interface != PHY_INTERFACE_MODE_QSGMII && - state->interface != PHY_INTERFACE_MODE_XGMII && - state->interface != PHY_INTERFACE_MODE_HSGMII && - state->interface != PHY_INTERFACE_MODE_10GBASER && - state->interface != PHY_INTERFACE_MODE_10GKR && - state->interface != PHY_INTERFACE_MODE_USXGMII && - state->interface != PHY_INTERFACE_MODE_INTERNAL && - state->interface != PHY_INTERFACE_MODE_SGMII) { - bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); - dev_err(ds->dev, - "Unsupported interface: %d for port %d\n", - state->interface, port); - return; - } - - /* Allow all the expected bits */ - phylink_set(mask, Autoneg); - phylink_set_port_modes(mask); - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - - /* With the exclusion of MII and Reverse MII, we support Gigabit, - * including Half duplex - */ - if (state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_REVMII) { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseT_Half); - } - - /* Internal phys of the RTL93xx family provide 10G */ - if (priv->ports[port].phy_is_integrated && - state->interface == PHY_INTERFACE_MODE_1000BASEX) { - phylink_set(mask, 1000baseX_Full); - } else if (priv->ports[port].phy_is_integrated) { - phylink_set(mask, 1000baseX_Full); - phylink_set(mask, 10000baseKR_Full); - phylink_set(mask, 10000baseSR_Full); - phylink_set(mask, 10000baseCR_Full); - } - if (state->interface == PHY_INTERFACE_MODE_INTERNAL) { - phylink_set(mask, 1000baseX_Full); - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 10000baseKR_Full); - phylink_set(mask, 10000baseT_Full); - phylink_set(mask, 10000baseSR_Full); - phylink_set(mask, 10000baseCR_Full); - } - - if (state->interface == PHY_INTERFACE_MODE_USXGMII) { - phylink_set(mask, 2500baseT_Full); - phylink_set(mask, 5000baseT_Full); - phylink_set(mask, 10000baseT_Full); - } - - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - - bitmap_and(supported, supported, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_and(state->advertising, state->advertising, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); - pr_debug("%s leaving supported: %*pb", __func__, __ETHTOOL_LINK_MODE_MASK_NBITS, supported); -} - -static int rtl83xx_phylink_mac_link_state(struct dsa_switch *ds, int port, - struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 speed; - u64 link; - - if (port < 0 || port > priv->cpu_port) - return -EINVAL; - - state->link = 0; - link = priv->r->get_port_reg_le(priv->r->mac_link_sts); - if (link & BIT_ULL(port)) - state->link = 1; - pr_debug("%s: link state port %d: %llx\n", __func__, port, link & BIT_ULL(port)); - - state->duplex = 0; - if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port)) - state->duplex = 1; - - speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port)); - speed >>= (port % 16) << 1; - switch (speed & 0x3) { - case 0: - state->speed = SPEED_10; - break; - case 1: - state->speed = SPEED_100; - break; - case 2: - state->speed = SPEED_1000; - break; - case 3: - if (priv->family_id == RTL9300_FAMILY_ID - && (port == 24 || port == 26)) /* Internal serdes */ - state->speed = SPEED_2500; - else - state->speed = SPEED_100; /* Is in fact 500Mbit */ - } - - state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX); - if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & BIT_ULL(port)) - state->pause |= MLO_PAUSE_RX; - if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port)) - state->pause |= MLO_PAUSE_TX; - - return 1; -} - -static int rtl93xx_phylink_mac_link_state(struct dsa_switch *ds, int port, - struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 speed; - u64 link; - u64 media; - - if (port < 0 || port > priv->cpu_port) - return -EINVAL; - - /* On the RTL9300 for at least the RTL8226B PHY, the MAC-side link - * state needs to be read twice in order to read a correct result. - * This would not be necessary for ports connected e.g. to RTL8218D - * PHYs. - */ - state->link = 0; - link = priv->r->get_port_reg_le(priv->r->mac_link_sts); - link = priv->r->get_port_reg_le(priv->r->mac_link_sts); - if (link & BIT_ULL(port)) - state->link = 1; - - if (priv->family_id == RTL9310_FAMILY_ID) - media = priv->r->get_port_reg_le(RTL931X_MAC_LINK_MEDIA_STS); - - if (priv->family_id == RTL9300_FAMILY_ID) - media = sw_r32(RTL930X_MAC_LINK_MEDIA_STS); - - if (media & BIT_ULL(port)) - state->link = 1; - - pr_debug("%s: link state port %d: %llx, media %llx\n", __func__, port, - link & BIT_ULL(port), media); - - state->duplex = 0; - if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port)) - state->duplex = 1; - - speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port)); - speed >>= (port % 8) << 2; - switch (speed & 0xf) { - case 0: - state->speed = SPEED_10; - break; - case 1: - state->speed = SPEED_100; - break; - case 2: - case 7: - state->speed = SPEED_1000; - break; - case 4: - state->speed = SPEED_10000; - break; - case 5: - case 8: - state->speed = SPEED_2500; - break; - case 6: - state->speed = SPEED_5000; - break; - default: - pr_err("%s: unknown speed: %d\n", __func__, (u32)speed & 0xf); - } - - if (priv->family_id == RTL9310_FAMILY_ID - && (port >= 52 && port <= 55)) { /* Internal serdes */ - state->speed = SPEED_10000; - state->link = 1; - state->duplex = 1; - } - - pr_debug("%s: speed is: %d %d\n", __func__, (u32)speed & 0xf, state->speed); - state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX); - if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & BIT_ULL(port)) - state->pause |= MLO_PAUSE_RX; - if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port)) - state->pause |= MLO_PAUSE_TX; - - return 1; -} - -static void rtl83xx_config_interface(int port, phy_interface_t interface) -{ - u32 old, int_shift, sds_shift; - - switch (port) { - case 24: - int_shift = 0; - sds_shift = 5; - break; - case 26: - int_shift = 3; - sds_shift = 0; - break; - default: - return; - } - - old = sw_r32(RTL838X_SDS_MODE_SEL); - switch (interface) { - case PHY_INTERFACE_MODE_1000BASEX: - if ((old >> sds_shift & 0x1f) == 4) - return; - sw_w32_mask(0x7 << int_shift, 1 << int_shift, RTL838X_INT_MODE_CTRL); - sw_w32_mask(0x1f << sds_shift, 4 << sds_shift, RTL838X_SDS_MODE_SEL); - break; - case PHY_INTERFACE_MODE_SGMII: - if ((old >> sds_shift & 0x1f) == 2) - return; - sw_w32_mask(0x7 << int_shift, 2 << int_shift, RTL838X_INT_MODE_CTRL); - sw_w32_mask(0x1f << sds_shift, 2 << sds_shift, RTL838X_SDS_MODE_SEL); - break; - default: - return; - } - pr_debug("configured port %d for interface %s\n", port, phy_modes(interface)); -} - -static void rtl83xx_phylink_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u32 reg; - int speed_bit = priv->family_id == RTL8380_FAMILY_ID ? 4 : 3; - - pr_debug("%s port %d, mode %x\n", __func__, port, mode); - - if (port == priv->cpu_port) { - /* Set Speed, duplex, flow control - * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL - * | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN - * | MEDIA_SEL - */ - if (priv->family_id == RTL8380_FAMILY_ID) { - sw_w32(0x6192F, priv->r->mac_force_mode_ctrl(priv->cpu_port)); - /* allow CRC errors on CPU-port */ - sw_w32_mask(0, 0x8, RTL838X_MAC_PORT_CTRL(priv->cpu_port)); - } else { - sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl(priv->cpu_port)); - } - return; - } - - reg = sw_r32(priv->r->mac_force_mode_ctrl(port)); - /* Auto-Negotiation does not work for MAC in RTL8390 */ - if (priv->family_id == RTL8380_FAMILY_ID) { - if (mode == MLO_AN_PHY || phylink_autoneg_inband(mode)) { - pr_debug("PHY autonegotiates\n"); - reg |= RTL838X_NWAY_EN; - sw_w32(reg, priv->r->mac_force_mode_ctrl(port)); - rtl83xx_config_interface(port, state->interface); - return; - } - } - - if (mode != MLO_AN_FIXED) - pr_debug("Fixed state.\n"); - - /* Clear id_mode_dis bit, and the existing port mode, let - * RGMII_MODE_EN bet set by mac_link_{up,down} */ - if (priv->family_id == RTL8380_FAMILY_ID) { - reg &= ~(RTL838X_RX_PAUSE_EN | RTL838X_TX_PAUSE_EN); - if (state->pause & MLO_PAUSE_TXRX_MASK) { - if (state->pause & MLO_PAUSE_TX) - reg |= RTL838X_TX_PAUSE_EN; - reg |= RTL838X_RX_PAUSE_EN; - } - } else if (priv->family_id == RTL8390_FAMILY_ID) { - reg &= ~(RTL839X_RX_PAUSE_EN | RTL839X_TX_PAUSE_EN); - if (state->pause & MLO_PAUSE_TXRX_MASK) { - if (state->pause & MLO_PAUSE_TX) - reg |= RTL839X_TX_PAUSE_EN; - reg |= RTL839X_RX_PAUSE_EN; - } - } - - - reg &= ~(3 << speed_bit); - switch (state->speed) { - case SPEED_1000: - reg |= 2 << speed_bit; - break; - case SPEED_100: - reg |= 1 << speed_bit; - break; - default: - break; /* Ignore, including 10MBit which has a speed value of 0 */ - } - - if (priv->family_id == RTL8380_FAMILY_ID) { - reg &= ~(RTL838X_DUPLEX_MODE | RTL838X_FORCE_LINK_EN); - if (state->link) - reg |= RTL838X_FORCE_LINK_EN; - if (state->duplex == RTL838X_DUPLEX_MODE) - reg |= RTL838X_DUPLEX_MODE; - } else if (priv->family_id == RTL8390_FAMILY_ID) { - reg &= ~(RTL839X_DUPLEX_MODE | RTL839X_FORCE_LINK_EN); - if (state->link) - reg |= RTL839X_FORCE_LINK_EN; - if (state->duplex == RTL839X_DUPLEX_MODE) - reg |= RTL839X_DUPLEX_MODE; - } - - /* LAG members must use DUPLEX and we need to enable the link */ - if (priv->lagmembers & BIT_ULL(port)) { - switch(priv->family_id) { - case RTL8380_FAMILY_ID: - reg |= (RTL838X_DUPLEX_MODE | RTL838X_FORCE_LINK_EN); - break; - case RTL8390_FAMILY_ID: - reg |= (RTL839X_DUPLEX_MODE | RTL839X_FORCE_LINK_EN); - break; - } - } - - /* Disable AN */ - if (priv->family_id == RTL8380_FAMILY_ID) - reg &= ~RTL838X_NWAY_EN; - sw_w32(reg, priv->r->mac_force_mode_ctrl(port)); -} - -static void rtl931x_phylink_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - int sds_num; - u32 reg, band; - - sds_num = priv->ports[port].sds_num; - pr_info("%s: speed %d sds_num %d\n", __func__, state->speed, sds_num); - - switch (state->interface) { - case PHY_INTERFACE_MODE_HSGMII: - pr_info("%s setting mode PHY_INTERFACE_MODE_HSGMII\n", __func__); - band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_HSGMII); - rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_HSGMII); - band = rtl931x_sds_cmu_band_set(sds_num, true, 62, PHY_INTERFACE_MODE_HSGMII); - break; - case PHY_INTERFACE_MODE_1000BASEX: - band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_1000BASEX); - rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_1000BASEX); - break; - case PHY_INTERFACE_MODE_XGMII: - band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_XGMII); - rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_XGMII); - break; - case PHY_INTERFACE_MODE_10GBASER: - case PHY_INTERFACE_MODE_10GKR: - band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_10GBASER); - rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_10GBASER); - break; - case PHY_INTERFACE_MODE_USXGMII: - /* Translates to MII_USXGMII_10GSXGMII */ - band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_USXGMII); - rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_USXGMII); - break; - case PHY_INTERFACE_MODE_SGMII: - pr_info("%s setting mode PHY_INTERFACE_MODE_SGMII\n", __func__); - band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_SGMII); - rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_SGMII); - band = rtl931x_sds_cmu_band_set(sds_num, true, 62, PHY_INTERFACE_MODE_SGMII); - break; - case PHY_INTERFACE_MODE_QSGMII: - band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_QSGMII); - rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_QSGMII); - break; - default: - pr_err("%s: unknown serdes mode: %s\n", - __func__, phy_modes(state->interface)); - return; - } - - reg = sw_r32(priv->r->mac_force_mode_ctrl(port)); - pr_info("%s reading FORCE_MODE_CTRL: %08x\n", __func__, reg); - - reg &= ~(RTL931X_DUPLEX_MODE | RTL931X_FORCE_EN | RTL931X_FORCE_LINK_EN); - - reg &= ~(0xf << 12); - reg |= 0x2 << 12; /* Set SMI speed to 0x2 */ - - reg |= RTL931X_TX_PAUSE_EN | RTL931X_RX_PAUSE_EN; - - if (priv->lagmembers & BIT_ULL(port)) - reg |= RTL931X_DUPLEX_MODE; - - if (state->duplex == DUPLEX_FULL) - reg |= RTL931X_DUPLEX_MODE; - - sw_w32(reg, priv->r->mac_force_mode_ctrl(port)); - -} - -static void rtl93xx_phylink_mac_config(struct dsa_switch *ds, int port, - unsigned int mode, - const struct phylink_link_state *state) -{ - struct rtl838x_switch_priv *priv = ds->priv; - int sds_num; - u32 reg; - - pr_info("%s port %d, mode %x, phy-mode: %s, speed %d, link %d\n", __func__, - port, mode, phy_modes(state->interface), state->speed, state->link); - - /* Nothing to be done for the CPU-port */ - if (port == priv->cpu_port) - return; - - if (priv->family_id == RTL9310_FAMILY_ID) - return rtl931x_phylink_mac_config(ds, port, mode, state); - - sds_num = priv->ports[port].sds_num; - pr_info("%s SDS is %d\n", __func__, sds_num); - if (sds_num >= 0 && - (state->interface == PHY_INTERFACE_MODE_1000BASEX || - state->interface == PHY_INTERFACE_MODE_10GBASER)) - rtl9300_serdes_setup(port, sds_num, state->interface); - - reg = sw_r32(priv->r->mac_force_mode_ctrl(port)); - reg &= ~(0xf << 3); - - switch (state->speed) { - case SPEED_10000: - reg |= 4 << 3; - break; - case SPEED_5000: - reg |= 6 << 3; - break; - case SPEED_2500: - reg |= 5 << 3; - break; - case SPEED_1000: - reg |= 2 << 3; - break; - case SPEED_100: - reg |= 1 << 3; - break; - default: - /* Also covers 10M */ - break; - } - - if (state->link) - reg |= RTL930X_FORCE_LINK_EN; - - if (priv->lagmembers & BIT_ULL(port)) - reg |= RTL930X_DUPLEX_MODE | RTL930X_FORCE_LINK_EN; - - if (state->duplex == DUPLEX_FULL) - reg |= RTL930X_DUPLEX_MODE; - else - reg &= ~RTL930X_DUPLEX_MODE; /* Clear duplex bit otherwise */ - - if (priv->ports[port].phy_is_integrated) - reg &= ~RTL930X_FORCE_EN; /* Clear MAC_FORCE_EN to allow SDS-MAC link */ - else - reg |= RTL930X_FORCE_EN; - - sw_w32(reg, priv->r->mac_force_mode_ctrl(port)); -} - -static void rtl83xx_phylink_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - /* Stop TX/RX to port */ - sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port)); - - /* No longer force link */ - sw_w32_mask(0x3, 0, priv->r->mac_force_mode_ctrl(port)); -} - -static void rtl93xx_phylink_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u32 v = 0; - - /* Stop TX/RX to port */ - sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port)); - - /* No longer force link */ - if (priv->family_id == RTL9300_FAMILY_ID) - v = RTL930X_FORCE_EN | RTL930X_FORCE_LINK_EN; - else if (priv->family_id == RTL9310_FAMILY_ID) - v = RTL931X_FORCE_EN | RTL931X_FORCE_LINK_EN; - sw_w32_mask(v, 0, priv->r->mac_force_mode_ctrl(port)); -} - -static void rtl83xx_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev, - int speed, int duplex, - bool tx_pause, bool rx_pause) -{ - struct rtl838x_switch_priv *priv = ds->priv; - /* Restart TX/RX to port */ - sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port)); - /* TODO: Set speed/duplex/pauses */ -} - -static void rtl93xx_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev, - int speed, int duplex, - bool tx_pause, bool rx_pause) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - /* Restart TX/RX to port */ - sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port)); - /* TODO: Set speed/duplex/pauses */ -} - -static void rtl83xx_get_strings(struct dsa_switch *ds, - int port, u32 stringset, u8 *data) -{ - if (stringset != ETH_SS_STATS) - return; - - for (int i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++) - ethtool_puts(&data, rtl83xx_mib[i].name); -} - -static void rtl83xx_get_ethtool_stats(struct dsa_switch *ds, int port, - uint64_t *data) -{ - struct rtl838x_switch_priv *priv = ds->priv; - const struct rtl83xx_mib_desc *mib; - u64 h; - - for (int i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++) { - mib = &rtl83xx_mib[i]; - - data[i] = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 252 - mib->offset); - if (mib->size == 2) { - h = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 248 - mib->offset); - data[i] |= h << 32; - } - } -} - -static int rtl83xx_get_sset_count(struct dsa_switch *ds, int port, int sset) -{ - if (sset != ETH_SS_STATS) - return 0; - - return ARRAY_SIZE(rtl83xx_mib); -} - -static int rtl83xx_mc_group_alloc(struct rtl838x_switch_priv *priv, int port) -{ - int mc_group = find_first_zero_bit(priv->mc_group_bm, MAX_MC_GROUPS - 1); - u64 portmask; - - if (mc_group >= MAX_MC_GROUPS - 1) - return -1; - - set_bit(mc_group, priv->mc_group_bm); - portmask = BIT_ULL(port); - priv->r->write_mcast_pmask(mc_group, portmask); - - return mc_group; -} - -static u64 rtl83xx_mc_group_add_port(struct rtl838x_switch_priv *priv, int mc_group, int port) -{ - u64 portmask = priv->r->read_mcast_pmask(mc_group); - - pr_debug("%s: %d\n", __func__, port); - - portmask |= BIT_ULL(port); - priv->r->write_mcast_pmask(mc_group, portmask); - - return portmask; -} - -static u64 rtl83xx_mc_group_del_port(struct rtl838x_switch_priv *priv, int mc_group, int port) -{ - u64 portmask = priv->r->read_mcast_pmask(mc_group); - - pr_debug("%s: %d\n", __func__, port); - - portmask &= ~BIT_ULL(port); - priv->r->write_mcast_pmask(mc_group, portmask); - if (!portmask) - clear_bit(mc_group, priv->mc_group_bm); - - return portmask; -} - -static int rtl83xx_port_enable(struct dsa_switch *ds, int port, - struct phy_device *phydev) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 v; - - pr_debug("%s: %x %d", __func__, (u32) priv, port); - priv->ports[port].enable = true; - - /* enable inner tagging on egress, do not keep any tags */ - priv->r->vlan_port_keep_tag_set(port, 0, 1); - - if (dsa_is_cpu_port(ds, port)) - return 0; - - /* add port to switch mask of CPU_PORT */ - priv->r->traffic_enable(priv->cpu_port, port); - - if (priv->is_lagmember[port]) { - pr_debug("%s: %d is lag slave. ignore\n", __func__, port); - return 0; - } - - /* add all other ports in the same bridge to switch mask of port */ - v = priv->r->traffic_get(port); - v |= priv->ports[port].pm; - priv->r->traffic_set(port, v); - - /* TODO: Figure out if this is necessary */ - if (priv->family_id == RTL9300_FAMILY_ID) { - sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_SABLK_CTRL); - sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_DABLK_CTRL); - } - - if (priv->ports[port].sds_num < 0) - priv->ports[port].sds_num = rtl93xx_get_sds(phydev); - - return 0; -} - -static void rtl83xx_port_disable(struct dsa_switch *ds, int port) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 v; - - pr_debug("%s %x: %d", __func__, (u32)priv, port); - /* you can only disable user ports */ - if (!dsa_is_user_port(ds, port)) - return; - - /* BUG: This does not work on RTL931X */ - /* remove port from switch mask of CPU_PORT */ - priv->r->traffic_disable(priv->cpu_port, port); - - /* remove all other ports in the same bridge from switch mask of port */ - v = priv->r->traffic_get(port); - v &= ~priv->ports[port].pm; - priv->r->traffic_set(port, v); - - priv->ports[port].enable = false; -} - -static int rtl83xx_set_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - if (e->eee_enabled && !priv->eee_enabled) { - pr_info("Globally enabling EEE\n"); - priv->r->init_eee(priv, true); - } - - priv->r->port_eee_set(priv, port, e->eee_enabled); - - if (e->eee_enabled) - pr_info("Enabled EEE for port %d\n", port); - else - pr_info("Disabled EEE for port %d\n", port); - - return 0; -} - -static int rtl83xx_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - e->supported = SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full; - - priv->r->eee_port_ability(priv, e, port); - - e->eee_enabled = priv->ports[port].eee_enabled; - - e->eee_active = !!(e->advertised & e->lp_advertised); - - return 0; -} - -static int rtl93xx_get_mac_eee(struct dsa_switch *ds, int port, - struct ethtool_eee *e) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - e->supported = SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full | - SUPPORTED_2500baseX_Full; - - priv->r->eee_port_ability(priv, e, port); - - e->eee_enabled = priv->ports[port].eee_enabled; - - e->eee_active = !!(e->advertised & e->lp_advertised); - - return 0; -} - -static int rtl83xx_set_ageing_time(struct dsa_switch *ds, unsigned int msec) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - priv->r->set_ageing_time(msec); - - return 0; -} - -static int rtl83xx_port_bridge_join(struct dsa_switch *ds, int port, - struct net_device *bridge) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 port_bitmap = BIT_ULL(priv->cpu_port), v; - - pr_debug("%s %x: %d %llx", __func__, (u32)priv, port, port_bitmap); - - if (priv->is_lagmember[port]) { - pr_debug("%s: %d is lag slave. ignore\n", __func__, port); - return 0; - } - - mutex_lock(&priv->reg_mutex); - for (int i = 0; i < ds->num_ports; i++) { - /* Add this port to the port matrix of the other ports in the - * same bridge. If the port is disabled, port matrix is kept - * and not being setup until the port becomes enabled. - */ - if (dsa_is_user_port(ds, i) && !priv->is_lagmember[i] && i != port) { - if (dsa_to_port(ds, i)->bridge_dev != bridge) - continue; - if (priv->ports[i].enable) - priv->r->traffic_enable(i, port); - - priv->ports[i].pm |= BIT_ULL(port); - port_bitmap |= BIT_ULL(i); - } - } - - /* Add all other ports to this port matrix. */ - if (priv->ports[port].enable) { - priv->r->traffic_enable(priv->cpu_port, port); - v = priv->r->traffic_get(port); - v |= port_bitmap; - priv->r->traffic_set(port, v); - } - priv->ports[port].pm |= port_bitmap; - - if (priv->r->set_static_move_action) - priv->r->set_static_move_action(port, false); - - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static void rtl83xx_port_bridge_leave(struct dsa_switch *ds, int port, - struct net_device *bridge) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 port_bitmap = 0, v; - - pr_debug("%s %x: %d", __func__, (u32)priv, port); - mutex_lock(&priv->reg_mutex); - for (int i = 0; i < ds->num_ports; i++) { - /* Remove this port from the port matrix of the other ports - * in the same bridge. If the port is disabled, port matrix - * is kept and not being setup until the port becomes enabled. - * And the other port's port matrix cannot be broken when the - * other port is still a VLAN-aware port. - */ - if (dsa_is_user_port(ds, i) && i != port) { - if (dsa_to_port(ds, i)->bridge_dev != bridge) - continue; - if (priv->ports[i].enable) - priv->r->traffic_disable(i, port); - - priv->ports[i].pm &= ~BIT_ULL(port); - port_bitmap |= BIT_ULL(i); - } - } - - /* Remove all other ports from this port matrix. */ - if (priv->ports[port].enable) { - v = priv->r->traffic_get(port); - v &= ~port_bitmap; - priv->r->traffic_set(port, v); - } - priv->ports[port].pm &= ~port_bitmap; - - if (priv->r->set_static_move_action) - priv->r->set_static_move_action(port, true); - - mutex_unlock(&priv->reg_mutex); -} - -void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) -{ - u32 msti = 0; - u32 port_state[4]; - int index, bit; - int pos = port; - struct rtl838x_switch_priv *priv = ds->priv; - int n = priv->port_width << 1; - - /* Ports above or equal CPU port can never be configured */ - if (port >= priv->cpu_port) - return; - - mutex_lock(&priv->reg_mutex); - - /* For the RTL839x and following, the bits are left-aligned, 838x and 930x - * have 64 bit fields, 839x and 931x have 128 bit fields - */ - if (priv->family_id == RTL8390_FAMILY_ID) - pos += 12; - if (priv->family_id == RTL9300_FAMILY_ID) - pos += 3; - if (priv->family_id == RTL9310_FAMILY_ID) - pos += 8; - - index = n - (pos >> 4) - 1; - bit = (pos << 1) % 32; - - priv->r->stp_get(priv, msti, port_state); - - pr_debug("Current state, port %d: %d\n", port, (port_state[index] >> bit) & 3); - port_state[index] &= ~(3 << bit); - - switch (state) { - case BR_STATE_DISABLED: /* 0 */ - port_state[index] |= (0 << bit); - break; - case BR_STATE_BLOCKING: /* 4 */ - case BR_STATE_LISTENING: /* 1 */ - port_state[index] |= (1 << bit); - break; - case BR_STATE_LEARNING: /* 2 */ - port_state[index] |= (2 << bit); - break; - case BR_STATE_FORWARDING: /* 3 */ - port_state[index] |= (3 << bit); - default: - break; - } - - priv->r->stp_set(priv, msti, port_state); - - mutex_unlock(&priv->reg_mutex); -} - -void rtl83xx_fast_age(struct dsa_switch *ds, int port) -{ - struct rtl838x_switch_priv *priv = ds->priv; - int s = priv->family_id == RTL8390_FAMILY_ID ? 2 : 0; - - pr_debug("FAST AGE port %d\n", port); - mutex_lock(&priv->reg_mutex); - /* RTL838X_L2_TBL_FLUSH_CTRL register bits, 839x has 1 bit larger - * port fields: - * 0-4: Replacing port - * 5-9: Flushed/replaced port - * 10-21: FVID - * 22: Entry types: 1: dynamic, 0: also static - * 23: Match flush port - * 24: Match FVID - * 25: Flush (0) or replace (1) L2 entries - * 26: Status of action (1: Start, 0: Done) - */ - sw_w32(1 << (26 + s) | 1 << (23 + s) | port << (5 + (s / 2)), priv->r->l2_tbl_flush_ctrl); - - do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & BIT(26 + s)); - - mutex_unlock(&priv->reg_mutex); -} - -void rtl931x_fast_age(struct dsa_switch *ds, int port) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_info("%s port %d\n", __func__, port); - mutex_lock(&priv->reg_mutex); - sw_w32(port << 11, RTL931X_L2_TBL_FLUSH_CTRL + 4); - - sw_w32(BIT(24) | BIT(28), RTL931X_L2_TBL_FLUSH_CTRL); - - do { } while (sw_r32(RTL931X_L2_TBL_FLUSH_CTRL) & BIT (28)); - - mutex_unlock(&priv->reg_mutex); -} - -void rtl930x_fast_age(struct dsa_switch *ds, int port) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - if (priv->family_id == RTL9310_FAMILY_ID) - return rtl931x_fast_age(ds, port); - - pr_debug("FAST AGE port %d\n", port); - mutex_lock(&priv->reg_mutex); - sw_w32(port << 11, RTL930X_L2_TBL_FLUSH_CTRL + 4); - - sw_w32(BIT(26) | BIT(30), RTL930X_L2_TBL_FLUSH_CTRL); - - do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & BIT(30)); - - mutex_unlock(&priv->reg_mutex); -} - -static int rtl83xx_vlan_filtering(struct dsa_switch *ds, int port, - bool vlan_filtering, - struct netlink_ext_ack *extack) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_debug("%s: port %d\n", __func__, port); - mutex_lock(&priv->reg_mutex); - - if (vlan_filtering) { - /* Enable ingress and egress filtering - * The VLAN_PORT_IGR_FILTER register uses 2 bits for each port to define - * the filter action: - * 0: Always Forward - * 1: Drop packet - * 2: Trap packet to CPU port - * The Egress filter used 1 bit per state (0: DISABLED, 1: ENABLED) - */ - if (port != priv->cpu_port) { - priv->r->set_vlan_igr_filter(port, IGR_DROP); - priv->r->set_vlan_egr_filter(port, EGR_ENABLE); - } - else { - priv->r->set_vlan_igr_filter(port, IGR_TRAP); - priv->r->set_vlan_egr_filter(port, EGR_DISABLE); - } - - } else { - /* Disable ingress and egress filtering */ - if (port != priv->cpu_port) - priv->r->set_vlan_igr_filter(port, IGR_FORWARD); - - priv->r->set_vlan_egr_filter(port, EGR_DISABLE); - } - - /* Do we need to do something to the CPU-Port, too? */ - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int rtl83xx_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct rtl838x_vlan_info info; - struct rtl838x_switch_priv *priv = ds->priv; - - priv->r->vlan_tables_read(0, &info); - - pr_debug("VLAN 0: Tagged ports %llx, untag %llx, profile %d, MC# %d, UC# %d, FID %x\n", - info.tagged_ports, info.untagged_ports, info.profile_id, - info.hash_mc_fid, info.hash_uc_fid, info.fid); - - priv->r->vlan_tables_read(1, &info); - pr_debug("VLAN 1: Tagged ports %llx, untag %llx, profile %d, MC# %d, UC# %d, FID %x\n", - info.tagged_ports, info.untagged_ports, info.profile_id, - info.hash_mc_fid, info.hash_uc_fid, info.fid); - priv->r->vlan_set_untagged(1, info.untagged_ports); - pr_debug("SET: Untagged ports, VLAN %d: %llx\n", 1, info.untagged_ports); - - priv->r->vlan_set_tagged(1, &info); - pr_debug("SET: Tagged ports, VLAN %d: %llx\n", 1, info.tagged_ports); - - return 0; -} - -static int rtl83xx_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan, - struct netlink_ext_ack *extack) -{ - struct rtl838x_vlan_info info; - struct rtl838x_switch_priv *priv = ds->priv; - int err; - - pr_debug("%s port %d, vid %d, flags %x\n", - __func__, port, vlan->vid, vlan->flags); - - /* Let no one mess with our special VLAN 0 */ - if (!vlan->vid) return 0; - - if (vlan->vid > 4095) { - dev_err(priv->dev, "VLAN out of range: %d", vlan->vid); - return -ENOTSUPP; - } - - err = rtl83xx_vlan_prepare(ds, port, vlan); - if (err) - return err; - - mutex_lock(&priv->reg_mutex); - - /* - * Realtek switches copy frames as-is to/from the CPU. For a proper - * VLAN handling the 12 bit RVID field (= VLAN id) for incoming traffic - * and the 1 bit RVID_SEL field (0 = use inner tag, 1 = use outer tag) - * for outgoing traffic of the CPU tag structure need to be handled. As - * of now no such logic is in place. So for the CPU port keep the fixed - * PVID=0 from initial setup in place and ignore all subsequent settings. - */ - if (port != priv->cpu_port) { - if (vlan->flags & BRIDGE_VLAN_INFO_PVID) - rtl83xx_vlan_set_pvid(priv, port, vlan->vid); - else if (priv->ports[port].pvid == vlan->vid) - rtl83xx_vlan_set_pvid(priv, port, 0); - } - - /* Get port memberships of this vlan */ - priv->r->vlan_tables_read(vlan->vid, &info); - - /* new VLAN? */ - if (!info.tagged_ports) { - info.fid = 0; - info.hash_mc_fid = false; - info.hash_uc_fid = false; - info.profile_id = 0; - } - - /* sanitize untagged_ports - must be a subset */ - if (info.untagged_ports & ~info.tagged_ports) - info.untagged_ports = 0; - - info.tagged_ports |= BIT_ULL(port); - if (vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED) - info.untagged_ports |= BIT_ULL(port); - else - info.untagged_ports &= ~BIT_ULL(port); - - priv->r->vlan_set_untagged(vlan->vid, info.untagged_ports); - pr_debug("Untagged ports, VLAN %d: %llx\n", vlan->vid, info.untagged_ports); - - priv->r->vlan_set_tagged(vlan->vid, &info); - pr_debug("Tagged ports, VLAN %d: %llx\n", vlan->vid, info.tagged_ports); - - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int rtl83xx_vlan_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct rtl838x_vlan_info info; - struct rtl838x_switch_priv *priv = ds->priv; - u16 pvid; - - pr_debug("%s: port %d, vid %d, flags %x\n", - __func__, port, vlan->vid, vlan->flags); - - /* Let no one mess with our special VLAN 0 */ - if (!vlan->vid) return 0; - - if (vlan->vid > 4095) { - dev_err(priv->dev, "VLAN out of range: %d", vlan->vid); - return -ENOTSUPP; - } - - mutex_lock(&priv->reg_mutex); - pvid = priv->ports[port].pvid; - - /* Reset to default if removing the current PVID */ - if (vlan->vid == pvid) { - rtl83xx_vlan_set_pvid(priv, port, 0); - } - /* Get port memberships of this vlan */ - priv->r->vlan_tables_read(vlan->vid, &info); - - /* remove port from both tables */ - info.untagged_ports &= (~BIT_ULL(port)); - info.tagged_ports &= (~BIT_ULL(port)); - - priv->r->vlan_set_untagged(vlan->vid, info.untagged_ports); - pr_debug("Untagged ports, VLAN %d: %llx\n", vlan->vid, info.untagged_ports); - - priv->r->vlan_set_tagged(vlan->vid, &info); - pr_debug("Tagged ports, VLAN %d: %llx\n", vlan->vid, info.tagged_ports); - - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static void rtl83xx_setup_l2_uc_entry(struct rtl838x_l2_entry *e, int port, int vid, u64 mac) -{ - memset(e, 0, sizeof(*e)); - - e->type = L2_UNICAST; - e->valid = true; - - e->age = 3; - e->is_static = true; - - e->port = port; - - e->rvid = e->vid = vid; - e->is_ip_mc = e->is_ipv6_mc = false; - u64_to_ether_addr(mac, e->mac); -} - -static void rtl83xx_setup_l2_mc_entry(struct rtl838x_l2_entry *e, int vid, u64 mac, int mc_group) -{ - memset(e, 0, sizeof(*e)); - - e->type = L2_MULTICAST; - e->valid = true; - - e->mc_portmask_index = mc_group; - - e->rvid = e->vid = vid; - e->is_ip_mc = e->is_ipv6_mc = false; - u64_to_ether_addr(mac, e->mac); -} - -/* Uses the seed to identify a hash bucket in the L2 using the derived hash key and then loops - * over the entries in the bucket until either a matching entry is found or an empty slot - * Returns the filled in rtl838x_l2_entry and the index in the bucket when an entry was found - * when an empty slot was found and must exist is false, the index of the slot is returned - * when no slots are available returns -1 - */ -static int rtl83xx_find_l2_hash_entry(struct rtl838x_switch_priv *priv, u64 seed, - bool must_exist, struct rtl838x_l2_entry *e) -{ - int idx = -1; - u32 key = priv->r->l2_hash_key(priv, seed); - u64 entry; - - pr_debug("%s: using key %x, for seed %016llx\n", __func__, key, seed); - /* Loop over all entries in the hash-bucket and over the second block on 93xx SoCs */ - for (int i = 0; i < priv->l2_bucket_size; i++) { - entry = priv->r->read_l2_entry_using_hash(key, i, e); - pr_debug("valid %d, mac %016llx\n", e->valid, ether_addr_to_u64(&e->mac[0])); - if (must_exist && !e->valid) - continue; - if (!e->valid || ((entry & 0x0fffffffffffffffULL) == seed)) { - idx = i > 3 ? ((key >> 14) & 0xffff) | i >> 1 : ((key << 2) | i) & 0xffff; - break; - } - } - - return idx; -} - -/* Uses the seed to identify an entry in the CAM by looping over all its entries - * Returns the filled in rtl838x_l2_entry and the index in the CAM when an entry was found - * when an empty slot was found the index of the slot is returned - * when no slots are available returns -1 - */ -static int rtl83xx_find_l2_cam_entry(struct rtl838x_switch_priv *priv, u64 seed, - bool must_exist, struct rtl838x_l2_entry *e) -{ - int idx = -1; - u64 entry; - - for (int i = 0; i < 64; i++) { - entry = priv->r->read_cam(i, e); - if (!must_exist && !e->valid) { - if (idx < 0) /* First empty entry? */ - idx = i; - break; - } else if ((entry & 0x0fffffffffffffffULL) == seed) { - pr_debug("Found entry in CAM\n"); - idx = i; - break; - } - } - - return idx; -} - -static int rtl83xx_port_fdb_add(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 mac = ether_addr_to_u64(addr); - struct rtl838x_l2_entry e; - int err = 0, idx; - u64 seed = priv->r->l2_hash_seed(mac, vid); - - if (priv->is_lagmember[port]) { - pr_debug("%s: %d is lag slave. ignore\n", __func__, port); - return 0; - } - - mutex_lock(&priv->reg_mutex); - - idx = rtl83xx_find_l2_hash_entry(priv, seed, false, &e); - - /* Found an existing or empty entry */ - if (idx >= 0) { - rtl83xx_setup_l2_uc_entry(&e, port, vid, mac); - priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e); - goto out; - } - - /* Hash buckets full, try CAM */ - idx = rtl83xx_find_l2_cam_entry(priv, seed, false, &e); - - if (idx >= 0) { - rtl83xx_setup_l2_uc_entry(&e, port, vid, mac); - priv->r->write_cam(idx, &e); - goto out; - } - - err = -ENOTSUPP; - -out: - mutex_unlock(&priv->reg_mutex); - - return err; -} - -static int rtl83xx_port_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 mac = ether_addr_to_u64(addr); - struct rtl838x_l2_entry e; - int err = 0, idx; - u64 seed = priv->r->l2_hash_seed(mac, vid); - - pr_debug("In %s, mac %llx, vid: %d\n", __func__, mac, vid); - mutex_lock(&priv->reg_mutex); - - idx = rtl83xx_find_l2_hash_entry(priv, seed, true, &e); - - if (idx >= 0) { - pr_debug("Found entry index %d, key %d and bucket %d\n", idx, idx >> 2, idx & 3); - e.valid = false; - priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e); - goto out; - } - - /* Check CAM for spillover from hash buckets */ - idx = rtl83xx_find_l2_cam_entry(priv, seed, true, &e); - - if (idx >= 0) { - e.valid = false; - priv->r->write_cam(idx, &e); - goto out; - } - err = -ENOENT; - -out: - mutex_unlock(&priv->reg_mutex); - - return err; -} - -static int rtl83xx_port_fdb_dump(struct dsa_switch *ds, int port, - dsa_fdb_dump_cb_t *cb, void *data) -{ - struct rtl838x_l2_entry e; - struct rtl838x_switch_priv *priv = ds->priv; - - mutex_lock(&priv->reg_mutex); - - for (int i = 0; i < priv->fib_entries; i++) { - priv->r->read_l2_entry_using_hash(i >> 2, i & 0x3, &e); - - if (!e.valid) - continue; - - if (e.port == port || e.port == RTL930X_PORT_IGNORE) - cb(e.mac, e.vid, e.is_static, data); - - if (!((i + 1) % 64)) - cond_resched(); - } - - for (int i = 0; i < 64; i++) { - priv->r->read_cam(i, &e); - - if (!e.valid) - continue; - - if (e.port == port) - cb(e.mac, e.vid, e.is_static, data); - } - - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int rtl83xx_port_mdb_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_mdb *mdb) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 mac = ether_addr_to_u64(mdb->addr); - struct rtl838x_l2_entry e; - int err = 0, idx; - int vid = mdb->vid; - u64 seed = priv->r->l2_hash_seed(mac, vid); - int mc_group; - - if (priv->id >= 0x9300) - return -EOPNOTSUPP; - - pr_debug("In %s port %d, mac %llx, vid: %d\n", __func__, port, mac, vid); - - if (priv->is_lagmember[port]) { - pr_debug("%s: %d is lag slave. ignore\n", __func__, port); - return -EINVAL; - } - - mutex_lock(&priv->reg_mutex); - - idx = rtl83xx_find_l2_hash_entry(priv, seed, false, &e); - - /* Found an existing or empty entry */ - if (idx >= 0) { - if (e.valid) { - pr_debug("Found an existing entry %016llx, mc_group %d\n", - ether_addr_to_u64(e.mac), e.mc_portmask_index); - rtl83xx_mc_group_add_port(priv, e.mc_portmask_index, port); - } else { - pr_debug("New entry for seed %016llx\n", seed); - mc_group = rtl83xx_mc_group_alloc(priv, port); - if (mc_group < 0) { - err = -ENOTSUPP; - goto out; - } - rtl83xx_setup_l2_mc_entry(&e, vid, mac, mc_group); - priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e); - } - goto out; - } - - /* Hash buckets full, try CAM */ - idx = rtl83xx_find_l2_cam_entry(priv, seed, false, &e); - - if (idx >= 0) { - if (e.valid) { - pr_debug("Found existing CAM entry %016llx, mc_group %d\n", - ether_addr_to_u64(e.mac), e.mc_portmask_index); - rtl83xx_mc_group_add_port(priv, e.mc_portmask_index, port); - } else { - pr_debug("New entry\n"); - mc_group = rtl83xx_mc_group_alloc(priv, port); - if (mc_group < 0) { - err = -ENOTSUPP; - goto out; - } - rtl83xx_setup_l2_mc_entry(&e, vid, mac, mc_group); - priv->r->write_cam(idx, &e); - } - goto out; - } - - err = -ENOTSUPP; - -out: - mutex_unlock(&priv->reg_mutex); - if (err) - dev_err(ds->dev, "failed to add MDB entry\n"); - - return err; -} - -int rtl83xx_port_mdb_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_mdb *mdb) -{ - struct rtl838x_switch_priv *priv = ds->priv; - u64 mac = ether_addr_to_u64(mdb->addr); - struct rtl838x_l2_entry e; - int err = 0, idx; - int vid = mdb->vid; - u64 seed = priv->r->l2_hash_seed(mac, vid); - u64 portmask; - - pr_debug("In %s, port %d, mac %llx, vid: %d\n", __func__, port, mac, vid); - - if (priv->is_lagmember[port]) { - pr_info("%s: %d is lag slave. ignore\n", __func__, port); - return 0; - } - - mutex_lock(&priv->reg_mutex); - - idx = rtl83xx_find_l2_hash_entry(priv, seed, true, &e); - - if (idx >= 0) { - pr_debug("Found entry index %d, key %d and bucket %d\n", idx, idx >> 2, idx & 3); - portmask = rtl83xx_mc_group_del_port(priv, e.mc_portmask_index, port); - if (!portmask) { - e.valid = false; - priv->r->write_l2_entry_using_hash(idx >> 2, idx & 0x3, &e); - } - goto out; - } - - /* Check CAM for spillover from hash buckets */ - idx = rtl83xx_find_l2_cam_entry(priv, seed, true, &e); - - if (idx >= 0) { - portmask = rtl83xx_mc_group_del_port(priv, e.mc_portmask_index, port); - if (!portmask) { - e.valid = false; - priv->r->write_cam(idx, &e); - } - goto out; - } - /* TODO: Re-enable with a newer kernel: err = -ENOENT; */ - -out: - mutex_unlock(&priv->reg_mutex); - - return err; -} - -static int rtl83xx_port_mirror_add(struct dsa_switch *ds, int port, - struct dsa_mall_mirror_tc_entry *mirror, - bool ingress) -{ - /* We support 4 mirror groups, one destination port per group */ - int group; - struct rtl838x_switch_priv *priv = ds->priv; - int ctrl_reg, dpm_reg, spm_reg; - - pr_debug("In %s\n", __func__); - - for (group = 0; group < 4; group++) { - if (priv->mirror_group_ports[group] == mirror->to_local_port) - break; - } - if (group >= 4) { - for (group = 0; group < 4; group++) { - if (priv->mirror_group_ports[group] < 0) - break; - } - } - - if (group >= 4) - return -ENOSPC; - - ctrl_reg = priv->r->mir_ctrl + group * 4; - dpm_reg = priv->r->mir_dpm + group * 4 * priv->port_width; - spm_reg = priv->r->mir_spm + group * 4 * priv->port_width; - - pr_debug("Using group %d\n", group); - mutex_lock(&priv->reg_mutex); - - if (priv->family_id == RTL8380_FAMILY_ID) { - /* Enable mirroring to port across VLANs (bit 11) */ - sw_w32(1 << 11 | (mirror->to_local_port << 4) | 1, ctrl_reg); - } else { - /* Enable mirroring to destination port */ - sw_w32((mirror->to_local_port << 4) | 1, ctrl_reg); - } - - if (ingress && (priv->r->get_port_reg_be(spm_reg) & (1ULL << port))) { - mutex_unlock(&priv->reg_mutex); - return -EEXIST; - } - if ((!ingress) && (priv->r->get_port_reg_be(dpm_reg) & (1ULL << port))) { - mutex_unlock(&priv->reg_mutex); - return -EEXIST; - } - - if (ingress) - priv->r->mask_port_reg_be(0, 1ULL << port, spm_reg); - else - priv->r->mask_port_reg_be(0, 1ULL << port, dpm_reg); - - priv->mirror_group_ports[group] = mirror->to_local_port; - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static void rtl83xx_port_mirror_del(struct dsa_switch *ds, int port, - struct dsa_mall_mirror_tc_entry *mirror) -{ - int group = 0; - struct rtl838x_switch_priv *priv = ds->priv; - int ctrl_reg, dpm_reg, spm_reg; - - pr_debug("In %s\n", __func__); - for (group = 0; group < 4; group++) { - if (priv->mirror_group_ports[group] == mirror->to_local_port) - break; - } - if (group >= 4) - return; - - ctrl_reg = priv->r->mir_ctrl + group * 4; - dpm_reg = priv->r->mir_dpm + group * 4 * priv->port_width; - spm_reg = priv->r->mir_spm + group * 4 * priv->port_width; - - mutex_lock(&priv->reg_mutex); - if (mirror->ingress) { - /* Ingress, clear source port matrix */ - priv->r->mask_port_reg_be(1ULL << port, 0, spm_reg); - } else { - /* Egress, clear destination port matrix */ - priv->r->mask_port_reg_be(1ULL << port, 0, dpm_reg); - } - - if (!(sw_r32(spm_reg) || sw_r32(dpm_reg))) { - priv->mirror_group_ports[group] = -1; - sw_w32(0, ctrl_reg); - } - - mutex_unlock(&priv->reg_mutex); -} - -static int rtl83xx_port_pre_bridge_flags(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) -{ - struct rtl838x_switch_priv *priv = ds->priv; - unsigned long features = 0; - pr_debug("%s: %d %lX\n", __func__, port, flags.val); - if (priv->r->enable_learning) - features |= BR_LEARNING; - if (priv->r->enable_flood) - features |= BR_FLOOD; - if (priv->r->enable_mcast_flood) - features |= BR_MCAST_FLOOD; - if (priv->r->enable_bcast_flood) - features |= BR_BCAST_FLOOD; - if (flags.mask & ~(features)) - return -EINVAL; - - return 0; -} - -static int rtl83xx_port_bridge_flags(struct dsa_switch *ds, int port, struct switchdev_brport_flags flags, struct netlink_ext_ack *extack) -{ - struct rtl838x_switch_priv *priv = ds->priv; - - pr_debug("%s: %d %lX\n", __func__, port, flags.val); - if (priv->r->enable_learning && (flags.mask & BR_LEARNING)) - priv->r->enable_learning(port, !!(flags.val & BR_LEARNING)); - - if (priv->r->enable_flood && (flags.mask & BR_FLOOD)) - priv->r->enable_flood(port, !!(flags.val & BR_FLOOD)); - - if (priv->r->enable_mcast_flood && (flags.mask & BR_MCAST_FLOOD)) - priv->r->enable_mcast_flood(port, !!(flags.val & BR_MCAST_FLOOD)); - - if (priv->r->enable_bcast_flood && (flags.mask & BR_BCAST_FLOOD)) - priv->r->enable_bcast_flood(port, !!(flags.val & BR_BCAST_FLOOD)); - - return 0; -} - -static bool rtl83xx_lag_can_offload(struct dsa_switch *ds, - struct net_device *lag, - struct netdev_lag_upper_info *info) -{ - int id; - - id = dsa_lag_id(ds->dst, lag); - if (id < 0 || id >= ds->num_lag_ids) - return false; - - if (info->tx_type != NETDEV_LAG_TX_TYPE_HASH) { - return false; - } - if (info->hash_type != NETDEV_LAG_HASH_L2 && info->hash_type != NETDEV_LAG_HASH_L23) - return false; - - return true; -} - -static int rtl83xx_port_lag_change(struct dsa_switch *ds, int port) -{ - pr_debug("%s: %d\n", __func__, port); - /* Nothing to be done... */ - - return 0; -} - -static int rtl83xx_port_lag_join(struct dsa_switch *ds, int port, - struct net_device *lag, - struct netdev_lag_upper_info *info) -{ - struct rtl838x_switch_priv *priv = ds->priv; - int i, err = 0; - - if (!rtl83xx_lag_can_offload(ds, lag, info)) - return -EOPNOTSUPP; - - mutex_lock(&priv->reg_mutex); - - for (i = 0; i < priv->n_lags; i++) { - if ((!priv->lag_devs[i]) || (priv->lag_devs[i] == lag)) - break; - } - if (port >= priv->cpu_port) { - err = -EINVAL; - goto out; - } - pr_info("port_lag_join: group %d, port %d\n",i, port); - if (!priv->lag_devs[i]) - priv->lag_devs[i] = lag; - - if (priv->lag_primary[i] == -1) { - priv->lag_primary[i] = port; - } else - priv->is_lagmember[port] = 1; - - priv->lagmembers |= (1ULL << port); - - pr_debug("lag_members = %llX\n", priv->lagmembers); - err = rtl83xx_lag_add(priv->ds, i, port, info); - if (err) { - err = -EINVAL; - goto out; - } - -out: - mutex_unlock(&priv->reg_mutex); - - return err; -} - -static int rtl83xx_port_lag_leave(struct dsa_switch *ds, int port, - struct net_device *lag) -{ - int i, group = -1, err; - struct rtl838x_switch_priv *priv = ds->priv; - - mutex_lock(&priv->reg_mutex); - for (i = 0; i < priv->n_lags; i++) { - if (priv->lags_port_members[i] & BIT_ULL(port)) { - group = i; - break; - } - } - - if (group == -1) { - pr_info("port_lag_leave: port %d is not a member\n", port); - err = -EINVAL; - goto out; - } - - if (port >= priv->cpu_port) { - err = -EINVAL; - goto out; - } - pr_info("port_lag_del: group %d, port %d\n",group, port); - priv->lagmembers &=~ (1ULL << port); - priv->lag_primary[i] = -1; - priv->is_lagmember[port] = 0; - pr_debug("lag_members = %llX\n", priv->lagmembers); - err = rtl83xx_lag_del(priv->ds, group, port); - if (err) { - err = -EINVAL; - goto out; - } - if (!priv->lags_port_members[i]) - priv->lag_devs[i] = NULL; - -out: - mutex_unlock(&priv->reg_mutex); - return 0; -} - -int dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg) -{ - u32 val; - u32 offset = 0; - struct rtl838x_switch_priv *priv = ds->priv; - - if ((phy_addr >= 24) && - (phy_addr <= 27) && - (priv->ports[24].phy == PHY_RTL838X_SDS)) { - if (phy_addr == 26) - offset = 0x100; - val = sw_r32(RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)) & 0xffff; - return val; - } - - read_phy(phy_addr, 0, phy_reg, &val); - return val; -} - -int dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val) -{ - u32 offset = 0; - struct rtl838x_switch_priv *priv = ds->priv; - - if ((phy_addr >= 24) && - (phy_addr <= 27) && - (priv->ports[24].phy == PHY_RTL838X_SDS)) { - if (phy_addr == 26) - offset = 0x100; - sw_w32(val, RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)); - return 0; - } - return write_phy(phy_addr, 0, phy_reg, val); -} - -const struct dsa_switch_ops rtl83xx_switch_ops = { - .get_tag_protocol = rtl83xx_get_tag_protocol, - .setup = rtl83xx_setup, - - .phy_read = dsa_phy_read, - .phy_write = dsa_phy_write, - - .phylink_validate = rtl83xx_phylink_validate, - .phylink_mac_link_state = rtl83xx_phylink_mac_link_state, - .phylink_mac_config = rtl83xx_phylink_mac_config, - .phylink_mac_link_down = rtl83xx_phylink_mac_link_down, - .phylink_mac_link_up = rtl83xx_phylink_mac_link_up, - - .get_strings = rtl83xx_get_strings, - .get_ethtool_stats = rtl83xx_get_ethtool_stats, - .get_sset_count = rtl83xx_get_sset_count, - - .port_enable = rtl83xx_port_enable, - .port_disable = rtl83xx_port_disable, - - .get_mac_eee = rtl83xx_get_mac_eee, - .set_mac_eee = rtl83xx_set_mac_eee, - - .set_ageing_time = rtl83xx_set_ageing_time, - .port_bridge_join = rtl83xx_port_bridge_join, - .port_bridge_leave = rtl83xx_port_bridge_leave, - .port_stp_state_set = rtl83xx_port_stp_state_set, - .port_fast_age = rtl83xx_fast_age, - - .port_vlan_filtering = rtl83xx_vlan_filtering, - .port_vlan_add = rtl83xx_vlan_add, - .port_vlan_del = rtl83xx_vlan_del, - - .port_fdb_add = rtl83xx_port_fdb_add, - .port_fdb_del = rtl83xx_port_fdb_del, - .port_fdb_dump = rtl83xx_port_fdb_dump, - - .port_mdb_add = rtl83xx_port_mdb_add, - .port_mdb_del = rtl83xx_port_mdb_del, - - .port_mirror_add = rtl83xx_port_mirror_add, - .port_mirror_del = rtl83xx_port_mirror_del, - - .port_lag_change = rtl83xx_port_lag_change, - .port_lag_join = rtl83xx_port_lag_join, - .port_lag_leave = rtl83xx_port_lag_leave, - - .port_pre_bridge_flags = rtl83xx_port_pre_bridge_flags, - .port_bridge_flags = rtl83xx_port_bridge_flags, -}; - -const struct dsa_switch_ops rtl930x_switch_ops = { - .get_tag_protocol = rtl83xx_get_tag_protocol, - .setup = rtl93xx_setup, - - .phy_read = dsa_phy_read, - .phy_write = dsa_phy_write, - - .phylink_validate = rtl93xx_phylink_validate, - .phylink_mac_link_state = rtl93xx_phylink_mac_link_state, - .phylink_mac_config = rtl93xx_phylink_mac_config, - .phylink_mac_link_down = rtl93xx_phylink_mac_link_down, - .phylink_mac_link_up = rtl93xx_phylink_mac_link_up, - - .get_strings = rtl83xx_get_strings, - .get_ethtool_stats = rtl83xx_get_ethtool_stats, - .get_sset_count = rtl83xx_get_sset_count, - - .port_enable = rtl83xx_port_enable, - .port_disable = rtl83xx_port_disable, - - .get_mac_eee = rtl93xx_get_mac_eee, - .set_mac_eee = rtl83xx_set_mac_eee, - - .set_ageing_time = rtl83xx_set_ageing_time, - .port_bridge_join = rtl83xx_port_bridge_join, - .port_bridge_leave = rtl83xx_port_bridge_leave, - .port_stp_state_set = rtl83xx_port_stp_state_set, - .port_fast_age = rtl930x_fast_age, - - .port_vlan_filtering = rtl83xx_vlan_filtering, - .port_vlan_add = rtl83xx_vlan_add, - .port_vlan_del = rtl83xx_vlan_del, - - .port_fdb_add = rtl83xx_port_fdb_add, - .port_fdb_del = rtl83xx_port_fdb_del, - .port_fdb_dump = rtl83xx_port_fdb_dump, - - .port_mdb_add = rtl83xx_port_mdb_add, - .port_mdb_del = rtl83xx_port_mdb_del, - - .port_lag_change = rtl83xx_port_lag_change, - .port_lag_join = rtl83xx_port_lag_join, - .port_lag_leave = rtl83xx_port_lag_leave, - - .port_pre_bridge_flags = rtl83xx_port_pre_bridge_flags, - .port_bridge_flags = rtl83xx_port_bridge_flags, -}; diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/qos.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/qos.c deleted file mode 100644 index d101e1c97e..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/qos.c +++ /dev/null @@ -1,565 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include - -#include "rtl83xx.h" - -static struct rtl838x_switch_priv *switch_priv; -extern struct rtl83xx_soc_info soc_info; - -enum scheduler_type { - WEIGHTED_FAIR_QUEUE = 0, - WEIGHTED_ROUND_ROBIN, -}; - -int max_available_queue[] = {0, 1, 2, 3, 4, 5, 6, 7}; -int default_queue_weights[] = {1, 1, 1, 1, 1, 1, 1, 1}; -int dot1p_priority_remapping[] = {0, 1, 2, 3, 4, 5, 6, 7}; - -static void rtl839x_read_scheduling_table(int port) -{ - u32 cmd = 1 << 9 | /* Execute cmd */ - 0 << 8 | /* Read */ - 0 << 6 | /* Table type 0b00 */ - (port & 0x3f); - rtl839x_exec_tbl2_cmd(cmd); -} - -static void rtl839x_write_scheduling_table(int port) -{ - u32 cmd = 1 << 9 | /* Execute cmd */ - 1 << 8 | /* Write */ - 0 << 6 | /* Table type 0b00 */ - (port & 0x3f); - rtl839x_exec_tbl2_cmd(cmd); -} - -static void rtl839x_read_out_q_table(int port) -{ - u32 cmd = 1 << 9 | /* Execute cmd */ - 0 << 8 | /* Read */ - 2 << 6 | /* Table type 0b10 */ - (port & 0x3f); - rtl839x_exec_tbl2_cmd(cmd); -} - -static void rtl838x_storm_enable(struct rtl838x_switch_priv *priv, int port, bool enable) -{ - /* Enable Storm control for that port for UC, MC, and BC */ - if (enable) - sw_w32(0x7, RTL838X_STORM_CTRL_LB_CTRL(port)); - else - sw_w32(0x0, RTL838X_STORM_CTRL_LB_CTRL(port)); -} - -u32 rtl838x_get_egress_rate(struct rtl838x_switch_priv *priv, int port) -{ - if (port > priv->cpu_port) - return 0; - - return sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)) & 0x3fff; -} - -/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */ -int rtl838x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate) -{ - u32 old_rate; - - if (port > priv->cpu_port) - return -1; - - old_rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)); - sw_w32(rate, RTL838X_SCHED_P_EGR_RATE_CTRL(port)); - - return old_rate; -} - -/* Set the rate limit for a particular queue in Bits/s - * units of the rate is 16Kbps - */ -void rtl838x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port, - int queue, u32 rate) -{ - if (port > priv->cpu_port) - return; - - if (queue > 7) - return; - - sw_w32(rate, RTL838X_SCHED_Q_EGR_RATE_CTRL(port, queue)); -} - -static void rtl838x_rate_control_init(struct rtl838x_switch_priv *priv) -{ - pr_info("Enabling Storm control\n"); - /* TICK_PERIOD_PPS */ - if (priv->id == 0x8380) - sw_w32_mask(0x3ff << 20, 434 << 20, RTL838X_SCHED_LB_TICK_TKN_CTRL_0); - - /* Set burst rate */ - sw_w32(0x00008000, RTL838X_STORM_CTRL_BURST_0); /* UC */ - sw_w32(0x80008000, RTL838X_STORM_CTRL_BURST_1); /* MC and BC */ - - /* Set burst Packets per Second to 32 */ - sw_w32(0x00000020, RTL838X_STORM_CTRL_BURST_PPS_0); /* UC */ - sw_w32(0x00200020, RTL838X_STORM_CTRL_BURST_PPS_1); /* MC and BC */ - - /* Include IFG in storm control, rate based on bytes/s (0 = packets) */ - sw_w32_mask(0, 1 << 6 | 1 << 5, RTL838X_STORM_CTRL); - /* Bandwidth control includes preamble and IFG (10 Bytes) */ - sw_w32_mask(0, 1, RTL838X_SCHED_CTRL); - - /* On SoCs except RTL8382M, set burst size of port egress */ - if (priv->id != 0x8382) - sw_w32_mask(0xffff, 0x800, RTL838X_SCHED_LB_THR); - - /* Enable storm control on all ports with a PHY and limit rates, - * for UC and MC for both known and unknown addresses - */ - for (int i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) { - sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_UC(i)); - sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_MC(i)); - sw_w32(0x8000, RTL838X_STORM_CTRL_PORT_BC(i)); - rtl838x_storm_enable(priv, i, true); - } - } - - /* Attack prevention, enable all attack prevention measures */ - /* sw_w32(0x1ffff, RTL838X_ATK_PRVNT_CTRL); */ - /* Attack prevention, drop (bit = 0) problematic packets on all ports. - * Setting bit = 1 means: trap to CPU - */ - /* sw_w32(0, RTL838X_ATK_PRVNT_ACT); */ - /* Enable attack prevention on all ports */ - /* sw_w32(0x0fffffff, RTL838X_ATK_PRVNT_PORT_EN); */ -} - -/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */ -u32 rtl839x_get_egress_rate(struct rtl838x_switch_priv *priv, int port) -{ - u32 rate; - - pr_debug("%s: Getting egress rate on port %d to %d\n", __func__, port, rate); - if (port >= priv->cpu_port) - return 0; - - mutex_lock(&priv->reg_mutex); - - rtl839x_read_scheduling_table(port); - - rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)); - rate <<= 12; - rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20; - - mutex_unlock(&priv->reg_mutex); - - return rate; -} - -/* Sets the rate limit, 10MBit/s is equal to a rate value of 625, returns previous rate */ -int rtl839x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate) -{ - u32 old_rate; - - pr_debug("%s: Setting egress rate on port %d to %d\n", __func__, port, rate); - if (port >= priv->cpu_port) - return -1; - - mutex_lock(&priv->reg_mutex); - - rtl839x_read_scheduling_table(port); - - old_rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)) & 0xff; - old_rate <<= 12; - old_rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20; - sw_w32_mask(0xff, (rate >> 12) & 0xff, RTL839X_TBL_ACCESS_DATA_2(7)); - sw_w32_mask(0xfff << 20, rate << 20, RTL839X_TBL_ACCESS_DATA_2(8)); - - rtl839x_write_scheduling_table(port); - - mutex_unlock(&priv->reg_mutex); - - return old_rate; -} - -/* Set the rate limit for a particular queue in Bits/s - * units of the rate is 16Kbps - */ -void rtl839x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port, - int queue, u32 rate) -{ - int lsb = 128 + queue * 20; - int low_byte = 8 - (lsb >> 5); - int start_bit = lsb - (low_byte << 5); - u32 high_mask = 0xfffff >> (32 - start_bit); - - pr_debug("%s: Setting egress rate on port %d, queue %d to %d\n", - __func__, port, queue, rate); - if (port >= priv->cpu_port) - return; - if (queue > 7) - return; - - mutex_lock(&priv->reg_mutex); - - rtl839x_read_scheduling_table(port); - - sw_w32_mask(0xfffff << start_bit, (rate & 0xfffff) << start_bit, - RTL839X_TBL_ACCESS_DATA_2(low_byte)); - if (high_mask) - sw_w32_mask(high_mask, (rate & 0xfffff) >> (32- start_bit), - RTL839X_TBL_ACCESS_DATA_2(low_byte - 1)); - - rtl839x_write_scheduling_table(port); - - mutex_unlock(&priv->reg_mutex); -} - -static void rtl839x_rate_control_init(struct rtl838x_switch_priv *priv) -{ - pr_info("%s: enabling rate control\n", __func__); - /* Tick length and token size settings for SoC with 250MHz, - * RTL8350 family would use 50MHz - */ - /* Set the special tick period */ - sw_w32(976563, RTL839X_STORM_CTRL_SPCL_LB_TICK_TKN_CTRL); - /* Ingress tick period and token length 10G */ - sw_w32(18 << 11 | 151, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_0); - /* Ingress tick period and token length 1G */ - sw_w32(245 << 11 | 129, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_1); - /* Egress tick period 10G, bytes/token 10G and tick period 1G, bytes/token 1G */ - sw_w32(18 << 24 | 151 << 16 | 185 << 8 | 97, RTL839X_SCHED_LB_TICK_TKN_CTRL); - /* Set the tick period of the CPU and the Token Len */ - sw_w32(3815 << 8 | 1, RTL839X_SCHED_LB_TICK_TKN_PPS_CTRL); - - /* Set the Weighted Fair Queueing burst size */ - sw_w32_mask(0xffff, 4500, RTL839X_SCHED_LB_THR); - - /* Storm-rate calculation is based on bytes/sec (bit 5), include IFG (bit 6) */ - sw_w32_mask(0, 1 << 5 | 1 << 6, RTL839X_STORM_CTRL); - - /* Based on the rate control mode being bytes/s - * set tick period and token length for 10G - */ - sw_w32(18 << 10 | 151, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_0); - /* and for 1G ports */ - sw_w32(246 << 10 | 129, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_1); - - /* Set default burst rates on all ports (the same for 1G / 10G) with a PHY - * for UC, MC and BC - * For 1G port, the minimum burst rate is 1700, maximum 65535, - * For 10G ports it is 2650 and 1048575 respectively */ - for (int p = 0; p < priv->cpu_port; p++) { - if (priv->ports[p].phy && !priv->ports[p].is10G) { - sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_UC_1(p)); - sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_MC_1(p)); - sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_BC_1(p)); - } - } - - /* Setup ingress/egress per-port rate control */ - for (int p = 0; p < priv->cpu_port; p++) { - if (!priv->ports[p].phy) - continue; - - if (priv->ports[p].is10G) - rtl839x_set_egress_rate(priv, p, 625000); /* 10GB/s */ - else - rtl839x_set_egress_rate(priv, p, 62500); /* 1GB/s */ - - /* Setup queues: all RTL83XX SoCs have 8 queues, maximum rate */ - for (int q = 0; q < 8; q++) - rtl839x_egress_rate_queue_limit(priv, p, q, 0xfffff); - - if (priv->ports[p].is10G) { - /* Set high threshold to maximum */ - sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_10G_0(p)); - } else { - /* Set high threshold to maximum */ - sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_1(p)); - } - } - - /* Set global ingress low watermark rate */ - sw_w32(65532, RTL839X_IGR_BWCTRL_CTRL_LB_THR); -} - - - -void rtl838x_setup_prio2queue_matrix(int *min_queues) -{ - u32 v = 0; - - pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL838X_QM_INTPRI2QID_CTRL)); - for (int i = 0; i < MAX_PRIOS; i++) - v |= i << (min_queues[i] * 3); - sw_w32(v, RTL838X_QM_INTPRI2QID_CTRL); -} - -void rtl839x_setup_prio2queue_matrix(int *min_queues) -{ - pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL839X_QM_INTPRI2QID_CTRL(0))); - for (int i = 0; i < MAX_PRIOS; i++) { - int q = min_queues[i]; - sw_w32(i << (q * 3), RTL839X_QM_INTPRI2QID_CTRL(q)); - } -} - -/* Sets the CPU queue depending on the internal priority of a packet */ -void rtl83xx_setup_prio2queue_cpu_matrix(int *max_queues) -{ - int reg = soc_info.family == RTL8380_FAMILY_ID ? RTL838X_QM_PKT2CPU_INTPRI_MAP - : RTL839X_QM_PKT2CPU_INTPRI_MAP; - u32 v = 0; - - pr_info("QM_PKT2CPU_INTPRI_MAP: %08x\n", sw_r32(reg)); - for (int i = 0; i < MAX_PRIOS; i++) - v |= max_queues[i] << (i * 3); - sw_w32(v, reg); -} - -void rtl83xx_setup_default_prio2queue(void) -{ - if (soc_info.family == RTL8380_FAMILY_ID) { - rtl838x_setup_prio2queue_matrix(max_available_queue); - } else { - rtl839x_setup_prio2queue_matrix(max_available_queue); - } - rtl83xx_setup_prio2queue_cpu_matrix(max_available_queue); -} - -/* Sets the output queue assigned to a port, the port can be the CPU-port */ -void rtl839x_set_egress_queue(int port, int queue) -{ - sw_w32(queue << ((port % 10) *3), RTL839X_QM_PORT_QNUM(port)); -} - -/* Sets the priority assigned of an ingress port, the port can be the CPU-port */ -void rtl83xx_set_ingress_priority(int port, int priority) -{ - if (soc_info.family == RTL8380_FAMILY_ID) - sw_w32(priority << ((port % 10) *3), RTL838X_PRI_SEL_PORT_PRI(port)); - else - sw_w32(priority << ((port % 10) *3), RTL839X_PRI_SEL_PORT_PRI(port)); -} - -int rtl839x_get_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port) -{ - u32 v; - - mutex_lock(&priv->reg_mutex); - - rtl839x_read_scheduling_table(port); - v = sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)); - - mutex_unlock(&priv->reg_mutex); - - if (v & BIT(19)) - return WEIGHTED_ROUND_ROBIN; - - return WEIGHTED_FAIR_QUEUE; -} - -void rtl839x_set_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port, - enum scheduler_type sched) -{ - enum scheduler_type t = rtl839x_get_scheduling_algorithm(priv, port); - u32 v, oam_state, oam_port_state; - u32 count; - int i, egress_rate; - - mutex_lock(&priv->reg_mutex); - /* Check whether we need to empty the egress queue of that port due to Errata E0014503 */ - if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) { - /* Read Operations, Adminstatrion and Management control register */ - oam_state = sw_r32(RTL839X_OAM_CTRL); - - /* Get current OAM state */ - oam_port_state = sw_r32(RTL839X_OAM_PORT_ACT_CTRL(port)); - - /* Disable OAM to block traffice */ - v = sw_r32(RTL839X_OAM_CTRL); - sw_w32_mask(0, 1, RTL839X_OAM_CTRL); - v = sw_r32(RTL839X_OAM_CTRL); - - /* Set to trap action OAM forward (bits 1, 2) and OAM Mux Action Drop (bit 0) */ - sw_w32(0x2, RTL839X_OAM_PORT_ACT_CTRL(port)); - - /* Set port egress rate to unlimited */ - egress_rate = rtl839x_set_egress_rate(priv, port, 0xFFFFF); - - /* Wait until the egress used page count of that port is 0 */ - i = 0; - do { - usleep_range(100, 200); - rtl839x_read_out_q_table(port); - count = sw_r32(RTL839X_TBL_ACCESS_DATA_2(6)); - count >>= 20; - i++; - } while (i < 3500 && count > 0); - } - - /* Actually set the scheduling algorithm */ - rtl839x_read_scheduling_table(port); - sw_w32_mask(BIT(19), sched ? BIT(19) : 0, RTL839X_TBL_ACCESS_DATA_2(8)); - rtl839x_write_scheduling_table(port); - - if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) { - /* Restore OAM state to control register */ - sw_w32(oam_state, RTL839X_OAM_CTRL); - - /* Restore trap action state */ - sw_w32(oam_port_state, RTL839X_OAM_PORT_ACT_CTRL(port)); - - /* Restore port egress rate */ - rtl839x_set_egress_rate(priv, port, egress_rate); - } - - mutex_unlock(&priv->reg_mutex); -} - -void rtl839x_set_scheduling_queue_weights(struct rtl838x_switch_priv *priv, int port, - int *queue_weights) -{ - mutex_lock(&priv->reg_mutex); - - rtl839x_read_scheduling_table(port); - - for (int i = 0; i < 8; i++) { - int lsb = 48 + i * 8; - int low_byte = 8 - (lsb >> 5); - int start_bit = lsb - (low_byte << 5); - int high_mask = 0x3ff >> (32 - start_bit); - - sw_w32_mask(0x3ff << start_bit, (queue_weights[i] & 0x3ff) << start_bit, - RTL839X_TBL_ACCESS_DATA_2(low_byte)); - if (high_mask) - sw_w32_mask(high_mask, (queue_weights[i] & 0x3ff) >> (32- start_bit), - RTL839X_TBL_ACCESS_DATA_2(low_byte - 1)); - } - - rtl839x_write_scheduling_table(port); - mutex_unlock(&priv->reg_mutex); -} - -void rtl838x_config_qos(void) -{ - u32 v; - - pr_info("Setting up RTL838X QoS\n"); - pr_info("RTL838X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL838X_PRI_SEL_TBL_CTRL(0))); - rtl83xx_setup_default_prio2queue(); - - /* Enable inner (bit 12) and outer (bit 13) priority remapping from DSCP */ - sw_w32_mask(0, BIT(12) | BIT(13), RTL838X_PRI_DSCP_INVLD_CTRL0); - - /* Set default weight for calculating internal priority, in prio selection group 0 - * Port based (prio 3), Port outer-tag (4), DSCP (5), Inner Tag (6), Outer Tag (7) - */ - v = 3 | (4 << 3) | (5 << 6) | (6 << 9) | (7 << 12); - sw_w32(v, RTL838X_PRI_SEL_TBL_CTRL(0)); - - /* Set the inner and outer priority one-to-one to re-marked outer dot1p priority */ - v = 0; - for (int p = 0; p < 8; p++) - v |= p << (3 * p); - sw_w32(v, RTL838X_RMK_OPRI_CTRL); - sw_w32(v, RTL838X_RMK_IPRI_CTRL); - - v = 0; - for (int p = 0; p < 8; p++) - v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3); - sw_w32(v, RTL838X_PRI_SEL_IPRI_REMAP); - - /* On all ports set scheduler type to WFQ */ - for (int i = 0; i <= soc_info.cpu_port; i++) - sw_w32(0, RTL838X_SCHED_P_TYPE_CTRL(i)); - - /* Enable egress scheduler for CPU-Port */ - sw_w32_mask(0, BIT(8), RTL838X_SCHED_LB_CTRL(soc_info.cpu_port)); - - /* Enable egress drop allways on */ - sw_w32_mask(0, BIT(11), RTL838X_FC_P_EGR_DROP_CTRL(soc_info.cpu_port)); - - /* Give special trap frames priority 7 (BPDUs) and routing exceptions: */ - sw_w32_mask(0, 7 << 3 | 7, RTL838X_QM_PKT2CPU_INTPRI_2); - /* Give RMA frames priority 7: */ - sw_w32_mask(0, 7, RTL838X_QM_PKT2CPU_INTPRI_1); -} - -void rtl839x_config_qos(void) -{ - u32 v; - struct rtl838x_switch_priv *priv = switch_priv; - - pr_info("Setting up RTL839X QoS\n"); - pr_info("RTL839X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL839X_PRI_SEL_TBL_CTRL(0))); - rtl83xx_setup_default_prio2queue(); - - for (int port = 0; port < soc_info.cpu_port; port++) - sw_w32(7, RTL839X_QM_PORT_QNUM(port)); - - /* CPU-port gets queue number 7 */ - sw_w32(7, RTL839X_QM_PORT_QNUM(soc_info.cpu_port)); - - for (int port = 0; port <= soc_info.cpu_port; port++) { - rtl83xx_set_ingress_priority(port, 0); - rtl839x_set_scheduling_algorithm(priv, port, WEIGHTED_FAIR_QUEUE); - rtl839x_set_scheduling_queue_weights(priv, port, default_queue_weights); - /* Do re-marking based on outer tag */ - sw_w32_mask(0, BIT(port % 32), RTL839X_RMK_PORT_DEI_TAG_CTRL(port)); - } - - /* Remap dot1p priorities to internal priority, for this the outer tag needs be re-marked */ - v = 0; - for (int p = 0; p < 8; p++) - v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3); - sw_w32(v, RTL839X_PRI_SEL_IPRI_REMAP); - - /* Configure Drop Precedence for Drop Eligible Indicator (DEI) - * Index 0: 0 - * Index 1: 2 - * Each indicator is 2 bits long - */ - sw_w32(2 << 2, RTL839X_PRI_SEL_DEI2DP_REMAP); - - /* Re-mark DEI: 4 bit-fields of 2 bits each, field 0 is bits 0-1, ... */ - sw_w32((0x1 << 2) | (0x1 << 4), RTL839X_RMK_DEI_CTRL); - - /* Set Congestion avoidance drop probability to 0 for drop precedences 0-2 (bits 24-31) - * low threshold (bits 0-11) to 4095 and high threshold (bits 12-23) to 4095 - * Weighted Random Early Detection (WRED) is used - */ - sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(0)); - sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(1)); - sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(2)); - - /* Set queue-based congestion avoidance properties, register fields are as - * for forward RTL839X_WRED_PORT_THR_CTRL - */ - for (int q = 0; q < 8; q++) { - sw_w32(255 << 24 | 78 << 12 | 68, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); - sw_w32(255 << 24 | 74 << 12 | 64, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); - sw_w32(255 << 24 | 70 << 12 | 60, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); - } -} - -void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv) -{ - switch_priv = priv; - - pr_info("In %s\n", __func__); - - if (priv->family_id == RTL8380_FAMILY_ID) - return rtl838x_config_qos(); - else if (priv->family_id == RTL8390_FAMILY_ID) - return rtl839x_config_qos(); - - if (priv->family_id == RTL8380_FAMILY_ID) - rtl838x_rate_control_init(priv); - else if (priv->family_id == RTL8390_FAMILY_ID) - rtl839x_rate_control_init(priv); -} diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c deleted file mode 100644 index d93087f5b1..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c +++ /dev/null @@ -1,2036 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include -#include - -#include "rtl83xx.h" - -#define RTL838X_VLAN_PORT_TAG_STS_UNTAG 0x0 -#define RTL838X_VLAN_PORT_TAG_STS_TAGGED 0x1 -#define RTL838X_VLAN_PORT_TAG_STS_PRIORITY_TAGGED 0x2 - -#define RTL838X_VLAN_PORT_TAG_STS_CTRL_BASE 0xA530 -/* port 0-28 */ -#define RTL838X_VLAN_PORT_TAG_STS_CTRL(port) \ - RTL838X_VLAN_PORT_TAG_STS_CTRL_BASE + (port << 2) - -#define RTL838X_VLAN_PORT_TAG_STS_CTRL_EGR_P_OTAG_KEEP_MASK GENMASK(11,10) -#define RTL838X_VLAN_PORT_TAG_STS_CTRL_EGR_P_ITAG_KEEP_MASK GENMASK(9,8) -#define RTL838X_VLAN_PORT_TAG_STS_CTRL_IGR_P_OTAG_KEEP_MASK GENMASK(7,6) -#define RTL838X_VLAN_PORT_TAG_STS_CTRL_IGR_P_ITAG_KEEP_MASK GENMASK(5,4) -#define RTL838X_VLAN_PORT_TAG_STS_CTRL_OTAG_STS_MASK GENMASK(3,2) -#define RTL838X_VLAN_PORT_TAG_STS_CTRL_ITAG_STS_MASK GENMASK(1,0) - -extern struct mutex smi_lock; - -/* see_dal_maple_acl_log2PhyTmplteField and src/app/diag_v2/src/diag_acl.c */ -/* Definition of the RTL838X-specific template field IDs as used in the PIE */ -enum template_field_id { - TEMPLATE_FIELD_SPMMASK = 0, - TEMPLATE_FIELD_SPM0 = 1, /* Source portmask ports 0-15 */ - TEMPLATE_FIELD_SPM1 = 2, /* Source portmask ports 16-28 */ - TEMPLATE_FIELD_RANGE_CHK = 3, - TEMPLATE_FIELD_DMAC0 = 4, /* Destination MAC [15:0] */ - TEMPLATE_FIELD_DMAC1 = 5, /* Destination MAC [31:16] */ - TEMPLATE_FIELD_DMAC2 = 6, /* Destination MAC [47:32] */ - TEMPLATE_FIELD_SMAC0 = 7, /* Source MAC [15:0] */ - TEMPLATE_FIELD_SMAC1 = 8, /* Source MAC [31:16] */ - TEMPLATE_FIELD_SMAC2 = 9, /* Source MAC [47:32] */ - TEMPLATE_FIELD_ETHERTYPE = 10, /* Ethernet typ */ - TEMPLATE_FIELD_OTAG = 11, /* Outer VLAN tag */ - TEMPLATE_FIELD_ITAG = 12, /* Inner VLAN tag */ - TEMPLATE_FIELD_SIP0 = 13, /* IPv4 or IPv6 source IP[15:0] or ARP/RARP */ - /* source protocol address in header */ - TEMPLATE_FIELD_SIP1 = 14, /* IPv4 or IPv6 source IP[31:16] or ARP/RARP */ - TEMPLATE_FIELD_DIP0 = 15, /* IPv4 or IPv6 destination IP[15:0] */ - TEMPLATE_FIELD_DIP1 = 16, /* IPv4 or IPv6 destination IP[31:16] */ - TEMPLATE_FIELD_IP_TOS_PROTO = 17, /* IPv4 TOS/IPv6 traffic class and */ - /* IPv4 proto/IPv6 next header fields */ - TEMPLATE_FIELD_L34_HEADER = 18, /* packet with extra tag and IPv6 with auth, dest, */ - /* frag, route, hop-by-hop option header, */ - /* IGMP type, TCP flag */ - TEMPLATE_FIELD_L4_SPORT = 19, /* TCP/UDP source port */ - TEMPLATE_FIELD_L4_DPORT = 20, /* TCP/UDP destination port */ - TEMPLATE_FIELD_ICMP_IGMP = 21, - TEMPLATE_FIELD_IP_RANGE = 22, - TEMPLATE_FIELD_FIELD_SELECTOR_VALID = 23, /* Field selector mask */ - TEMPLATE_FIELD_FIELD_SELECTOR_0 = 24, - TEMPLATE_FIELD_FIELD_SELECTOR_1 = 25, - TEMPLATE_FIELD_FIELD_SELECTOR_2 = 26, - TEMPLATE_FIELD_FIELD_SELECTOR_3 = 27, - TEMPLATE_FIELD_SIP2 = 28, /* IPv6 source IP[47:32] */ - TEMPLATE_FIELD_SIP3 = 29, /* IPv6 source IP[63:48] */ - TEMPLATE_FIELD_SIP4 = 30, /* IPv6 source IP[79:64] */ - TEMPLATE_FIELD_SIP5 = 31, /* IPv6 source IP[95:80] */ - TEMPLATE_FIELD_SIP6 = 32, /* IPv6 source IP[111:96] */ - TEMPLATE_FIELD_SIP7 = 33, /* IPv6 source IP[127:112] */ - TEMPLATE_FIELD_DIP2 = 34, /* IPv6 destination IP[47:32] */ - TEMPLATE_FIELD_DIP3 = 35, /* IPv6 destination IP[63:48] */ - TEMPLATE_FIELD_DIP4 = 36, /* IPv6 destination IP[79:64] */ - TEMPLATE_FIELD_DIP5 = 37, /* IPv6 destination IP[95:80] */ - TEMPLATE_FIELD_DIP6 = 38, /* IPv6 destination IP[111:96] */ - TEMPLATE_FIELD_DIP7 = 39, /* IPv6 destination IP[127:112] */ - TEMPLATE_FIELD_FWD_VID = 40, /* Forwarding VLAN-ID */ - TEMPLATE_FIELD_FLOW_LABEL = 41, -}; - -/* The RTL838X SoCs use 5 fixed templates with definitions for which data fields are to - * be copied from the Ethernet Frame header into the 12 User-definable fields of the Packet - * Inspection Engine's buffer. The following defines the field contents for each of the fixed - * templates. Additionally, 3 user-definable templates can be set up via the definitions - * in RTL838X_ACL_TMPLTE_CTRL control registers. - * TODO: See all src/app/diag_v2/src/diag_pie.c - */ -#define N_FIXED_TEMPLATES 5 -static enum template_field_id fixed_templates[N_FIXED_TEMPLATES][N_FIXED_FIELDS] = -{ - { - TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_OTAG, - TEMPLATE_FIELD_SMAC0, TEMPLATE_FIELD_SMAC1, TEMPLATE_FIELD_SMAC2, - TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2, - TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_ITAG, TEMPLATE_FIELD_RANGE_CHK - }, { - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, - TEMPLATE_FIELD_DIP1,TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_L4_SPORT, - TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_ICMP_IGMP, TEMPLATE_FIELD_ITAG, - TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1 - }, { - TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2, - TEMPLATE_FIELD_ITAG, TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_IP_TOS_PROTO, - TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_SIP0, - TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1 - }, { - TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_DIP2, - TEMPLATE_FIELD_DIP3, TEMPLATE_FIELD_DIP4, TEMPLATE_FIELD_DIP5, - TEMPLATE_FIELD_DIP6, TEMPLATE_FIELD_DIP7, TEMPLATE_FIELD_L4_DPORT, - TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_ICMP_IGMP, TEMPLATE_FIELD_IP_TOS_PROTO - }, { - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_SIP2, - TEMPLATE_FIELD_SIP3, TEMPLATE_FIELD_SIP4, TEMPLATE_FIELD_SIP5, - TEMPLATE_FIELD_SIP6, TEMPLATE_FIELD_SIP7, TEMPLATE_FIELD_ITAG, - TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1 - }, -}; - -void rtl838x_print_matrix(void) -{ - unsigned volatile int *ptr8; - - ptr8 = RTL838X_SW_BASE + RTL838X_PORT_ISO_CTRL(0); - for (int i = 0; i < 28; i += 8) - pr_debug("> %8x %8x %8x %8x %8x %8x %8x %8x\n", - ptr8[i + 0], ptr8[i + 1], ptr8[i + 2], ptr8[i + 3], - ptr8[i + 4], ptr8[i + 5], ptr8[i + 6], ptr8[i + 7]); - pr_debug("CPU_PORT> %8x\n", ptr8[28]); -} - -static inline int rtl838x_port_iso_ctrl(int p) -{ - return RTL838X_PORT_ISO_CTRL(p); -} - -static inline void rtl838x_exec_tbl0_cmd(u32 cmd) -{ - sw_w32(cmd, RTL838X_TBL_ACCESS_CTRL_0); - do { } while (sw_r32(RTL838X_TBL_ACCESS_CTRL_0) & BIT(15)); -} - -static inline void rtl838x_exec_tbl1_cmd(u32 cmd) -{ - sw_w32(cmd, RTL838X_TBL_ACCESS_CTRL_1); - do { } while (sw_r32(RTL838X_TBL_ACCESS_CTRL_1) & BIT(15)); -} - -static inline int rtl838x_tbl_access_data_0(int i) -{ - return RTL838X_TBL_ACCESS_DATA_0(i); -} - -static void rtl838x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 v; - /* Read VLAN table (0) via register 0 */ - struct table_reg *r = rtl_table_get(RTL8380_TBL_0, 0); - - rtl_table_read(r, vlan); - info->tagged_ports = sw_r32(rtl_table_data(r, 0)); - v = sw_r32(rtl_table_data(r, 1)); - pr_debug("VLAN_READ %d: %016llx %08x\n", vlan, info->tagged_ports, v); - rtl_table_release(r); - - info->profile_id = v & 0x7; - info->hash_mc_fid = !!(v & 0x8); - info->hash_uc_fid = !!(v & 0x10); - info->fid = (v >> 5) & 0x3f; - - /* Read UNTAG table (0) via table register 1 */ - r = rtl_table_get(RTL8380_TBL_1, 0); - rtl_table_read(r, vlan); - info->untagged_ports = sw_r32(rtl_table_data(r, 0)); - rtl_table_release(r); -} - -static void rtl838x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 v; - /* Access VLAN table (0) via register 0 */ - struct table_reg *r = rtl_table_get(RTL8380_TBL_0, 0); - - sw_w32(info->tagged_ports, rtl_table_data(r, 0)); - - v = info->profile_id; - v |= info->hash_mc_fid ? 0x8 : 0; - v |= info->hash_uc_fid ? 0x10 : 0; - v |= ((u32)info->fid) << 5; - sw_w32(v, rtl_table_data(r, 1)); - - rtl_table_write(r, vlan); - rtl_table_release(r); -} - -static void rtl838x_vlan_set_untagged(u32 vlan, u64 portmask) -{ - /* Access UNTAG table (0) via register 1 */ - struct table_reg *r = rtl_table_get(RTL8380_TBL_1, 0); - - sw_w32(portmask & 0x1fffffff, rtl_table_data(r, 0)); - rtl_table_write(r, vlan); - rtl_table_release(r); -} - -/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer - */ -static void rtl838x_vlan_fwd_on_inner(int port, bool is_set) -{ - if (is_set) - sw_w32_mask(BIT(port), 0, RTL838X_VLAN_PORT_FWD); - else - sw_w32_mask(0, BIT(port), RTL838X_VLAN_PORT_FWD); -} - -static u64 rtl838x_l2_hash_seed(u64 mac, u32 vid) -{ - return mac << 12 | vid; -} - -/* Applies the same hash algorithm as the one used currently by the ASIC to the seed - * and returns a key into the L2 hash table - */ -static u32 rtl838x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) -{ - u32 h1, h2, h3, h; - - if (sw_r32(priv->r->l2_ctrl_0) & 1) { - h1 = (seed >> 11) & 0x7ff; - h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f); - - h2 = (seed >> 33) & 0x7ff; - h2 = ((h2 & 0x3f) << 5) | ((h2 >> 6) & 0x1f); - - h3 = (seed >> 44) & 0x7ff; - h3 = ((h3 & 0x7f) << 4) | ((h3 >> 7) & 0xf); - - h = h1 ^ h2 ^ h3 ^ ((seed >> 55) & 0x1ff); - h ^= ((seed >> 22) & 0x7ff) ^ (seed & 0x7ff); - } else { - h = ((seed >> 55) & 0x1ff) ^ ((seed >> 44) & 0x7ff) ^ - ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff) ^ - ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff); - } - - return h; -} - -static inline int rtl838x_mac_force_mode_ctrl(int p) -{ - return RTL838X_MAC_FORCE_MODE_CTRL + (p << 2); -} - -static inline int rtl838x_mac_port_ctrl(int p) -{ - return RTL838X_MAC_PORT_CTRL(p); -} - -static inline int rtl838x_l2_port_new_salrn(int p) -{ - return RTL838X_L2_PORT_NEW_SALRN(p); -} - -static inline int rtl838x_l2_port_new_sa_fwd(int p) -{ - return RTL838X_L2_PORT_NEW_SA_FWD(p); -} - -static inline int rtl838x_mac_link_spd_sts(int p) -{ - return RTL838X_MAC_LINK_SPD_STS(p); -} - -inline static int rtl838x_trk_mbr_ctr(int group) -{ - return RTL838X_TRK_MBR_CTR + (group << 2); -} - -/* Fills an L2 entry structure from the SoC registers */ -static void rtl838x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) -{ - /* Table contains different entry types, we need to identify the right one: - * Check for MC entries, first - * In contrast to the RTL93xx SoCs, there is no valid bit, use heuristics to - * identify valid entries - */ - e->is_ip_mc = !!(r[0] & BIT(22)); - e->is_ipv6_mc = !!(r[0] & BIT(21)); - e->type = L2_INVALID; - - if (!e->is_ip_mc && !e->is_ipv6_mc) { - e->mac[0] = (r[1] >> 20); - e->mac[1] = (r[1] >> 12); - e->mac[2] = (r[1] >> 4); - e->mac[3] = (r[1] & 0xf) << 4 | (r[2] >> 28); - e->mac[4] = (r[2] >> 20); - e->mac[5] = (r[2] >> 12); - - e->rvid = r[2] & 0xfff; - e->vid = r[0] & 0xfff; - - /* Is it a unicast entry? check multicast bit */ - if (!(e->mac[0] & 1)) { - e->is_static = !!((r[0] >> 19) & 1); - e->port = (r[0] >> 12) & 0x1f; - e->block_da = !!(r[1] & BIT(30)); - e->block_sa = !!(r[1] & BIT(31)); - e->suspended = !!(r[1] & BIT(29)); - e->next_hop = !!(r[1] & BIT(28)); - if (e->next_hop) { - pr_debug("Found next hop entry, need to read extra data\n"); - e->nh_vlan_target = !!(r[0] & BIT(9)); - e->nh_route_id = r[0] & 0x1ff; - e->vid = e->rvid; - } - e->age = (r[0] >> 17) & 0x3; - e->valid = true; - - /* A valid entry has one of mutli-cast, aging, sa/da-blocking, - * next-hop or static entry bit set - */ - if (!(r[0] & 0x007c0000) && !(r[1] & 0xd0000000)) - e->valid = false; - else - e->type = L2_UNICAST; - } else { /* L2 multicast */ - pr_debug("Got L2 MC entry: %08x %08x %08x\n", r[0], r[1], r[2]); - e->valid = true; - e->type = L2_MULTICAST; - e->mc_portmask_index = (r[0] >> 12) & 0x1ff; - } - } else { /* IPv4 and IPv6 multicast */ - e->valid = true; - e->mc_portmask_index = (r[0] >> 12) & 0x1ff; - e->mc_gip = (r[1] << 20) | (r[2] >> 12); - e->rvid = r[2] & 0xfff; - } - if (e->is_ip_mc) - e->type = IP4_MULTICAST; - if (e->is_ipv6_mc) - e->type = IP6_MULTICAST; -} - -/* Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry */ -static void rtl838x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) -{ - u64 mac = ether_addr_to_u64(e->mac); - - if (!e->valid) { - r[0] = r[1] = r[2] = 0; - return; - } - - r[0] = e->is_ip_mc ? BIT(22) : 0; - r[0] |= e->is_ipv6_mc ? BIT(21) : 0; - - if (!e->is_ip_mc && !e->is_ipv6_mc) { - r[1] = mac >> 20; - r[2] = (mac & 0xfffff) << 12; - - /* Is it a unicast entry? check multicast bit */ - if (!(e->mac[0] & 1)) { - r[0] |= e->is_static ? BIT(19) : 0; - r[0] |= (e->port & 0x3f) << 12; - r[0] |= e->vid; - r[1] |= e->block_da ? BIT(30) : 0; - r[1] |= e->block_sa ? BIT(31) : 0; - r[1] |= e->suspended ? BIT(29) : 0; - r[2] |= e->rvid & 0xfff; - if (e->next_hop) { - r[1] |= BIT(28); - r[0] |= e->nh_vlan_target ? BIT(9) : 0; - r[0] |= e->nh_route_id & 0x1ff; - } - r[0] |= (e->age & 0x3) << 17; - } else { /* L2 Multicast */ - r[0] |= (e->mc_portmask_index & 0x1ff) << 12; - r[2] |= e->rvid & 0xfff; - r[0] |= e->vid & 0xfff; - pr_debug("FILL MC: %08x %08x %08x\n", r[0], r[1], r[2]); - } - } else { /* IPv4 and IPv6 multicast */ - r[0] |= (e->mc_portmask_index & 0x1ff) << 12; - r[1] = e->mc_gip >> 20; - r[2] = e->mc_gip << 12; - r[2] |= e->rvid; - } -} - -/* Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table - * hash is the id of the bucket and pos is the position of the entry in that bucket - * The data read from the SoC is filled into rtl838x_l2_entry - */ -static u64 rtl838x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 0); /* Access L2 Table 0 */ - u32 idx = (0 << 14) | (hash << 2) | pos; /* Search SRAM, with hash and at pos in bucket */ - - rtl_table_read(q, idx); - for (int i = 0; i < 3; i++) - r[i] = sw_r32(rtl_table_data(q, i)); - - rtl_table_release(q); - - rtl838x_fill_l2_entry(r, e); - if (!e->valid) - return 0; - - return (((u64) r[1]) << 32) | (r[2]); /* mac and vid concatenated as hash seed */ -} - -static void rtl838x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 0); - - u32 idx = (0 << 14) | (hash << 2) | pos; /* Access SRAM, with hash and at pos in bucket */ - - rtl838x_fill_l2_row(r, e); - - for (int i = 0; i < 3; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); -} - -static u64 rtl838x_read_cam(int idx, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 1); /* Access L2 Table 1 */ - - rtl_table_read(q, idx); - for (int i = 0; i < 3; i++) - r[i] = sw_r32(rtl_table_data(q, i)); - - rtl_table_release(q); - - rtl838x_fill_l2_entry(r, e); - if (!e->valid) - return 0; - - pr_debug("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); - - /* Return MAC with concatenated VID ac concatenated ID */ - return (((u64) r[1]) << 32) | r[2]; -} - -static void rtl838x_write_cam(int idx, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 1); /* Access L2 Table 1 */ - - rtl838x_fill_l2_row(r, e); - - for (int i = 0; i < 3; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); -} - -static u64 rtl838x_read_mcast_pmask(int idx) -{ - u32 portmask; - /* Read MC_PMSK (2) via register RTL8380_TBL_L2 */ - struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 2); - - rtl_table_read(q, idx); - portmask = sw_r32(rtl_table_data(q, 0)); - rtl_table_release(q); - - return portmask; -} - -static void rtl838x_write_mcast_pmask(int idx, u64 portmask) -{ - /* Access MC_PMSK (2) via register RTL8380_TBL_L2 */ - struct table_reg *q = rtl_table_get(RTL8380_TBL_L2, 2); - - sw_w32(((u32)portmask) & 0x1fffffff, rtl_table_data(q, 0)); - rtl_table_write(q, idx); - rtl_table_release(q); -} - -static void rtl838x_vlan_profile_setup(int profile) -{ - u32 pmask_id = UNKNOWN_MC_PMASK; - /* Enable L2 Learning BIT 0, portmask UNKNOWN_MC_PMASK for unknown MC traffic flooding */ - u32 p = 1 | pmask_id << 1 | pmask_id << 10 | pmask_id << 19; - - sw_w32(p, RTL838X_VLAN_PROFILE(profile)); - - /* RTL8380 and RTL8390 use an index into the portmask table to set the - * unknown multicast portmask, setup a default at a safe location - * On RTL93XX, the portmask is directly set in the profile, - * see e.g. rtl9300_vlan_profile_setup - */ - rtl838x_write_mcast_pmask(UNKNOWN_MC_PMASK, 0x1fffffff); -} - -static void rtl838x_l2_learning_setup(void) -{ - /* Set portmask for broadcast traffic and unknown unicast address flooding - * to the reserved entry in the portmask table used also for - * multicast flooding */ - sw_w32(UNKNOWN_MC_PMASK << 12 | UNKNOWN_MC_PMASK, RTL838X_L2_FLD_PMSK); - - /* Enable learning constraint system-wide (bit 0), per-port (bit 1) - * and per vlan (bit 2) */ - sw_w32(0x7, RTL838X_L2_LRN_CONSTRT_EN); - - /* Limit learning to maximum: 16k entries, after that just flood (bits 0-1) */ - sw_w32((0x3fff << 2) | 0, RTL838X_L2_LRN_CONSTRT); - - /* Do not trap ARP packets to CPU_PORT */ - sw_w32(0, RTL838X_SPCL_TRAP_ARP_CTRL); -} - -static void rtl838x_enable_learning(int port, bool enable) -{ - /* Limit learning to maximum: 16k entries */ - - sw_w32_mask(0x3fff << 2, enable ? (0x3fff << 2) : 0, - RTL838X_L2_PORT_LRN_CONSTRT + (port << 2)); -} - -static void rtl838x_enable_flood(int port, bool enable) -{ - /* 0: Forward - * 1: Disable - * 2: to CPU - * 3: Copy to CPU - */ - sw_w32_mask(0x3, enable ? 0 : 1, - RTL838X_L2_PORT_LRN_CONSTRT + (port << 2)); -} - -static void rtl838x_enable_mcast_flood(int port, bool enable) -{ - -} - -static void rtl838x_enable_bcast_flood(int port, bool enable) -{ - -} - -static void rtl838x_set_static_move_action(int port, bool forward) -{ - int shift = MV_ACT_PORT_SHIFT(port); - u32 val = forward ? MV_ACT_FORWARD : MV_ACT_DROP; - - sw_w32_mask(MV_ACT_MASK << shift, val << shift, - RTL838X_L2_PORT_STATIC_MV_ACT(port)); -} - -static void rtl838x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) -{ - u32 cmd = 1 << 15 | /* Execute cmd */ - 1 << 14 | /* Read */ - 2 << 12 | /* Table type 0b10 */ - (msti & 0xfff); - priv->r->exec_tbl0_cmd(cmd); - - for (int i = 0; i < 2; i++) - port_state[i] = sw_r32(priv->r->tbl_access_data_0(i)); -} - -static void rtl838x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) -{ - u32 cmd = 1 << 15 | /* Execute cmd */ - 0 << 14 | /* Write */ - 2 << 12 | /* Table type 0b10 */ - (msti & 0xfff); - - for (int i = 0; i < 2; i++) - sw_w32(port_state[i], priv->r->tbl_access_data_0(i)); - priv->r->exec_tbl0_cmd(cmd); -} - -u64 rtl838x_traffic_get(int source) -{ - return rtl838x_get_port_reg(rtl838x_port_iso_ctrl(source)); -} - -void rtl838x_traffic_set(int source, u64 dest_matrix) -{ - rtl838x_set_port_reg(dest_matrix, rtl838x_port_iso_ctrl(source)); -} - -void rtl838x_traffic_enable(int source, int dest) -{ - rtl838x_mask_port_reg(0, BIT(dest), rtl838x_port_iso_ctrl(source)); -} - -void rtl838x_traffic_disable(int source, int dest) -{ - rtl838x_mask_port_reg(BIT(dest), 0, rtl838x_port_iso_ctrl(source)); -} - -/* Enables or disables the EEE/EEEP capability of a port */ -static void rtl838x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enable) -{ - u32 v; - - /* This works only for Ethernet ports, and on the RTL838X, ports from 24 are SFP */ - if (port >= 24) - return; - - pr_debug("In %s: setting port %d to %d\n", __func__, port, enable); - v = enable ? 0x3 : 0x0; - - /* Set EEE state for 100 (bit 9) & 1000MBit (bit 10) */ - sw_w32_mask(0x3 << 9, v << 9, priv->r->mac_force_mode_ctrl(port)); - - /* Set TX/RX EEE state */ - if (enable) { - sw_w32_mask(0, BIT(port), RTL838X_EEE_PORT_TX_EN); - sw_w32_mask(0, BIT(port), RTL838X_EEE_PORT_RX_EN); - } else { - sw_w32_mask(BIT(port), 0, RTL838X_EEE_PORT_TX_EN); - sw_w32_mask(BIT(port), 0, RTL838X_EEE_PORT_RX_EN); - } - priv->ports[port].eee_enabled = enable; -} - - -/* Get EEE own capabilities and negotiation result */ -static int rtl838x_eee_port_ability(struct rtl838x_switch_priv *priv, - struct ethtool_eee *e, int port) -{ - u64 link; - - if (port >= 24) - return 0; - - link = rtl839x_get_port_reg_le(RTL838X_MAC_LINK_STS); - if (!(link & BIT(port))) - return 0; - - if (sw_r32(rtl838x_mac_force_mode_ctrl(port)) & BIT(9)) - e->advertised |= ADVERTISED_100baseT_Full; - - if (sw_r32(rtl838x_mac_force_mode_ctrl(port)) & BIT(10)) - e->advertised |= ADVERTISED_1000baseT_Full; - - if (sw_r32(RTL838X_MAC_EEE_ABLTY) & BIT(port)) { - e->lp_advertised = ADVERTISED_100baseT_Full; - e->lp_advertised |= ADVERTISED_1000baseT_Full; - return 1; - } - - return 0; -} - -static void rtl838x_init_eee(struct rtl838x_switch_priv *priv, bool enable) -{ - pr_info("Setting up EEE, state: %d\n", enable); - sw_w32_mask(0x4, 0, RTL838X_SMI_GLB_CTRL); - - /* Set timers for EEE */ - sw_w32(0x5001411, RTL838X_EEE_TX_TIMER_GIGA_CTRL); - sw_w32(0x5001417, RTL838X_EEE_TX_TIMER_GELITE_CTRL); - - /* Enable EEE MAC support on ports */ - for (int i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) - rtl838x_port_eee_set(priv, i, enable); - } - priv->eee_enabled = enable; -} - -static void rtl838x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int index) -{ - int block = index / PIE_BLOCK_SIZE; - u32 block_state = sw_r32(RTL838X_ACL_BLK_LOOKUP_CTRL); - - /* Make sure rule-lookup is enabled in the block */ - if (!(block_state & BIT(block))) - sw_w32(block_state | BIT(block), RTL838X_ACL_BLK_LOOKUP_CTRL); -} - -static void rtl838x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to) -{ - int block_from = index_from / PIE_BLOCK_SIZE; - int block_to = index_to / PIE_BLOCK_SIZE; - u32 v = (index_from << 1)| (index_to << 12 ) | BIT(0); - u32 block_state; - - pr_debug("%s: from %d to %d\n", __func__, index_from, index_to); - mutex_lock(&priv->reg_mutex); - - /* Remember currently active blocks */ - block_state = sw_r32(RTL838X_ACL_BLK_LOOKUP_CTRL); - - /* Make sure rule-lookup is disabled in the relevant blocks */ - for (int block = block_from; block <= block_to; block++) { - if (block_state & BIT(block)) - sw_w32(block_state & (~BIT(block)), RTL838X_ACL_BLK_LOOKUP_CTRL); - } - - /* Write from-to and execute bit into control register */ - sw_w32(v, RTL838X_ACL_CLR_CTRL); - - /* Wait until command has completed */ - do { - } while (sw_r32(RTL838X_ACL_CLR_CTRL) & BIT(0)); - - /* Re-enable rule lookup */ - for (int block = block_from; block <= block_to; block++) { - if (!(block_state & BIT(block))) - sw_w32(block_state | BIT(block), RTL838X_ACL_BLK_LOOKUP_CTRL); - } - - mutex_unlock(&priv->reg_mutex); -} - -/* Reads the intermediate representation of the templated match-fields of the - * PIE rule in the pie_rule structure and fills in the raw data fields in the - * raw register space r[]. - * The register space configuration size is identical for the RTL8380/90 and RTL9300, - * however the RTL9310 has 2 more registers / fields and the physical field-ids - * are specific to every platform. - */ -static void rtl838x_write_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[]) -{ - for (int i = 0; i < N_FIXED_FIELDS; i++) { - enum template_field_id field_type = t[i]; - u16 data = 0, data_m = 0; - - switch (field_type) { - case TEMPLATE_FIELD_SPM0: - data = pr->spm; - data_m = pr->spm_m; - break; - case TEMPLATE_FIELD_SPM1: - data = pr->spm >> 16; - data_m = pr->spm_m >> 16; - break; - case TEMPLATE_FIELD_OTAG: - data = pr->otag; - data_m = pr->otag_m; - break; - case TEMPLATE_FIELD_SMAC0: - data = pr->smac[4]; - data = (data << 8) | pr->smac[5]; - data_m = pr->smac_m[4]; - data_m = (data_m << 8) | pr->smac_m[5]; - break; - case TEMPLATE_FIELD_SMAC1: - data = pr->smac[2]; - data = (data << 8) | pr->smac[3]; - data_m = pr->smac_m[2]; - data_m = (data_m << 8) | pr->smac_m[3]; - break; - case TEMPLATE_FIELD_SMAC2: - data = pr->smac[0]; - data = (data << 8) | pr->smac[1]; - data_m = pr->smac_m[0]; - data_m = (data_m << 8) | pr->smac_m[1]; - break; - case TEMPLATE_FIELD_DMAC0: - data = pr->dmac[4]; - data = (data << 8) | pr->dmac[5]; - data_m = pr->dmac_m[4]; - data_m = (data_m << 8) | pr->dmac_m[5]; - break; - case TEMPLATE_FIELD_DMAC1: - data = pr->dmac[2]; - data = (data << 8) | pr->dmac[3]; - data_m = pr->dmac_m[2]; - data_m = (data_m << 8) | pr->dmac_m[3]; - break; - case TEMPLATE_FIELD_DMAC2: - data = pr->dmac[0]; - data = (data << 8) | pr->dmac[1]; - data_m = pr->dmac_m[0]; - data_m = (data_m << 8) | pr->dmac_m[1]; - break; - case TEMPLATE_FIELD_ETHERTYPE: - data = pr->ethertype; - data_m = pr->ethertype_m; - break; - case TEMPLATE_FIELD_ITAG: - data = pr->itag; - data_m = pr->itag_m; - break; - case TEMPLATE_FIELD_RANGE_CHK: - data = pr->field_range_check; - data_m = pr->field_range_check_m; - break; - case TEMPLATE_FIELD_SIP0: - if (pr->is_ipv6) { - data = pr->sip6.s6_addr16[7]; - data_m = pr->sip6_m.s6_addr16[7]; - } else { - data = pr->sip; - data_m = pr->sip_m; - } - break; - case TEMPLATE_FIELD_SIP1: - if (pr->is_ipv6) { - data = pr->sip6.s6_addr16[6]; - data_m = pr->sip6_m.s6_addr16[6]; - } else { - data = pr->sip >> 16; - data_m = pr->sip_m >> 16; - } - break; - case TEMPLATE_FIELD_SIP2: - case TEMPLATE_FIELD_SIP3: - case TEMPLATE_FIELD_SIP4: - case TEMPLATE_FIELD_SIP5: - case TEMPLATE_FIELD_SIP6: - case TEMPLATE_FIELD_SIP7: - data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; - data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; - break; - case TEMPLATE_FIELD_DIP0: - if (pr->is_ipv6) { - data = pr->dip6.s6_addr16[7]; - data_m = pr->dip6_m.s6_addr16[7]; - } else { - data = pr->dip; - data_m = pr->dip_m; - } - break; - case TEMPLATE_FIELD_DIP1: - if (pr->is_ipv6) { - data = pr->dip6.s6_addr16[6]; - data_m = pr->dip6_m.s6_addr16[6]; - } else { - data = pr->dip >> 16; - data_m = pr->dip_m >> 16; - } - break; - case TEMPLATE_FIELD_DIP2: - case TEMPLATE_FIELD_DIP3: - case TEMPLATE_FIELD_DIP4: - case TEMPLATE_FIELD_DIP5: - case TEMPLATE_FIELD_DIP6: - case TEMPLATE_FIELD_DIP7: - data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; - data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; - break; - case TEMPLATE_FIELD_IP_TOS_PROTO: - data = pr->tos_proto; - data_m = pr->tos_proto_m; - break; - case TEMPLATE_FIELD_L4_SPORT: - data = pr->sport; - data_m = pr->sport_m; - break; - case TEMPLATE_FIELD_L4_DPORT: - data = pr->dport; - data_m = pr->dport_m; - break; - case TEMPLATE_FIELD_ICMP_IGMP: - data = pr->icmp_igmp; - data_m = pr->icmp_igmp_m; - break; - default: - pr_info("%s: unknown field %d\n", __func__, field_type); - continue; - } - if (!(i % 2)) { - r[5 - i / 2] = data; - r[12 - i / 2] = data_m; - } else { - r[5 - i / 2] |= ((u32)data) << 16; - r[12 - i / 2] |= ((u32)data_m) << 16; - } - } -} - -/* Creates the intermediate representation of the templated match-fields of the - * PIE rule in the pie_rule structure by reading the raw data fields in the - * raw register space r[]. - * The register space configuration size is identical for the RTL8380/90 and RTL9300, - * however the RTL9310 has 2 more registers / fields and the physical field-ids - */ -static void rtl838x_read_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[]) -{ - for (int i = 0; i < N_FIXED_FIELDS; i++) { - enum template_field_id field_type = t[i]; - u16 data, data_m; - - field_type = t[i]; - if (!(i % 2)) { - data = r[5 - i / 2]; - data_m = r[12 - i / 2]; - } else { - data = r[5 - i / 2] >> 16; - data_m = r[12 - i / 2] >> 16; - } - - switch (field_type) { - case TEMPLATE_FIELD_SPM0: - pr->spm = (pr->spn << 16) | data; - pr->spm_m = (pr->spn << 16) | data_m; - break; - case TEMPLATE_FIELD_SPM1: - pr->spm = data; - pr->spm_m = data_m; - break; - case TEMPLATE_FIELD_OTAG: - pr->otag = data; - pr->otag_m = data_m; - break; - case TEMPLATE_FIELD_SMAC0: - pr->smac[4] = data >> 8; - pr->smac[5] = data; - pr->smac_m[4] = data >> 8; - pr->smac_m[5] = data; - break; - case TEMPLATE_FIELD_SMAC1: - pr->smac[2] = data >> 8; - pr->smac[3] = data; - pr->smac_m[2] = data >> 8; - pr->smac_m[3] = data; - break; - case TEMPLATE_FIELD_SMAC2: - pr->smac[0] = data >> 8; - pr->smac[1] = data; - pr->smac_m[0] = data >> 8; - pr->smac_m[1] = data; - break; - case TEMPLATE_FIELD_DMAC0: - pr->dmac[4] = data >> 8; - pr->dmac[5] = data; - pr->dmac_m[4] = data >> 8; - pr->dmac_m[5] = data; - break; - case TEMPLATE_FIELD_DMAC1: - pr->dmac[2] = data >> 8; - pr->dmac[3] = data; - pr->dmac_m[2] = data >> 8; - pr->dmac_m[3] = data; - break; - case TEMPLATE_FIELD_DMAC2: - pr->dmac[0] = data >> 8; - pr->dmac[1] = data; - pr->dmac_m[0] = data >> 8; - pr->dmac_m[1] = data; - break; - case TEMPLATE_FIELD_ETHERTYPE: - pr->ethertype = data; - pr->ethertype_m = data_m; - break; - case TEMPLATE_FIELD_ITAG: - pr->itag = data; - pr->itag_m = data_m; - break; - case TEMPLATE_FIELD_RANGE_CHK: - pr->field_range_check = data; - pr->field_range_check_m = data_m; - break; - case TEMPLATE_FIELD_SIP0: - pr->sip = data; - pr->sip_m = data_m; - break; - case TEMPLATE_FIELD_SIP1: - pr->sip = (pr->sip << 16) | data; - pr->sip_m = (pr->sip << 16) | data_m; - break; - case TEMPLATE_FIELD_SIP2: - pr->is_ipv6 = true; - /* Make use of limitiations on the position of the match values */ - ipv6_addr_set(&pr->sip6, pr->sip, r[5 - i / 2], - r[4 - i / 2], r[3 - i / 2]); - ipv6_addr_set(&pr->sip6_m, pr->sip_m, r[5 - i / 2], - r[4 - i / 2], r[3 - i / 2]); - case TEMPLATE_FIELD_SIP3: - case TEMPLATE_FIELD_SIP4: - case TEMPLATE_FIELD_SIP5: - case TEMPLATE_FIELD_SIP6: - case TEMPLATE_FIELD_SIP7: - break; - case TEMPLATE_FIELD_DIP0: - pr->dip = data; - pr->dip_m = data_m; - break; - case TEMPLATE_FIELD_DIP1: - pr->dip = (pr->dip << 16) | data; - pr->dip_m = (pr->dip << 16) | data_m; - break; - case TEMPLATE_FIELD_DIP2: - pr->is_ipv6 = true; - ipv6_addr_set(&pr->dip6, pr->dip, r[5 - i / 2], - r[4 - i / 2], r[3 - i / 2]); - ipv6_addr_set(&pr->dip6_m, pr->dip_m, r[5 - i / 2], - r[4 - i / 2], r[3 - i / 2]); - case TEMPLATE_FIELD_DIP3: - case TEMPLATE_FIELD_DIP4: - case TEMPLATE_FIELD_DIP5: - case TEMPLATE_FIELD_DIP6: - case TEMPLATE_FIELD_DIP7: - break; - case TEMPLATE_FIELD_IP_TOS_PROTO: - pr->tos_proto = data; - pr->tos_proto_m = data_m; - break; - case TEMPLATE_FIELD_L4_SPORT: - pr->sport = data; - pr->sport_m = data_m; - break; - case TEMPLATE_FIELD_L4_DPORT: - pr->dport = data; - pr->dport_m = data_m; - break; - case TEMPLATE_FIELD_ICMP_IGMP: - pr->icmp_igmp = data; - pr->icmp_igmp_m = data_m; - break; - default: - pr_info("%s: unknown field %d\n", __func__, field_type); - } - } -} - -static void rtl838x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) -{ - pr->spmmask_fix = (r[6] >> 22) & 0x3; - pr->spn = (r[6] >> 16) & 0x3f; - pr->mgnt_vlan = (r[6] >> 15) & 1; - pr->dmac_hit_sw = (r[6] >> 14) & 1; - pr->not_first_frag = (r[6] >> 13) & 1; - pr->frame_type_l4 = (r[6] >> 10) & 7; - pr->frame_type = (r[6] >> 8) & 3; - pr->otag_fmt = (r[6] >> 7) & 1; - pr->itag_fmt = (r[6] >> 6) & 1; - pr->otag_exist = (r[6] >> 5) & 1; - pr->itag_exist = (r[6] >> 4) & 1; - pr->frame_type_l2 = (r[6] >> 2) & 3; - pr->tid = r[6] & 3; - - pr->spmmask_fix_m = (r[13] >> 22) & 0x3; - pr->spn_m = (r[13] >> 16) & 0x3f; - pr->mgnt_vlan_m = (r[13] >> 15) & 1; - pr->dmac_hit_sw_m = (r[13] >> 14) & 1; - pr->not_first_frag_m = (r[13] >> 13) & 1; - pr->frame_type_l4_m = (r[13] >> 10) & 7; - pr->frame_type_m = (r[13] >> 8) & 3; - pr->otag_fmt_m = (r[13] >> 7) & 1; - pr->itag_fmt_m = (r[13] >> 6) & 1; - pr->otag_exist_m = (r[13] >> 5) & 1; - pr->itag_exist_m = (r[13] >> 4) & 1; - pr->frame_type_l2_m = (r[13] >> 2) & 3; - pr->tid_m = r[13] & 3; - - pr->valid = r[14] & BIT(31); - pr->cond_not = r[14] & BIT(30); - pr->cond_and1 = r[14] & BIT(29); - pr->cond_and2 = r[14] & BIT(28); - pr->ivalid = r[14] & BIT(27); - - pr->drop = (r[17] >> 14) & 3; - pr->fwd_sel = r[17] & BIT(13); - pr->ovid_sel = r[17] & BIT(12); - pr->ivid_sel = r[17] & BIT(11); - pr->flt_sel = r[17] & BIT(10); - pr->log_sel = r[17] & BIT(9); - pr->rmk_sel = r[17] & BIT(8); - pr->meter_sel = r[17] & BIT(7); - pr->tagst_sel = r[17] & BIT(6); - pr->mir_sel = r[17] & BIT(5); - pr->nopri_sel = r[17] & BIT(4); - pr->cpupri_sel = r[17] & BIT(3); - pr->otpid_sel = r[17] & BIT(2); - pr->itpid_sel = r[17] & BIT(1); - pr->shaper_sel = r[17] & BIT(0); -} - -static void rtl838x_write_pie_fixed_fields(u32 r[], struct pie_rule *pr) -{ - r[6] = ((u32) (pr->spmmask_fix & 0x3)) << 22; - r[6] |= ((u32) (pr->spn & 0x3f)) << 16; - r[6] |= pr->mgnt_vlan ? BIT(15) : 0; - r[6] |= pr->dmac_hit_sw ? BIT(14) : 0; - r[6] |= pr->not_first_frag ? BIT(13) : 0; - r[6] |= ((u32) (pr->frame_type_l4 & 0x7)) << 10; - r[6] |= ((u32) (pr->frame_type & 0x3)) << 8; - r[6] |= pr->otag_fmt ? BIT(7) : 0; - r[6] |= pr->itag_fmt ? BIT(6) : 0; - r[6] |= pr->otag_exist ? BIT(5) : 0; - r[6] |= pr->itag_exist ? BIT(4) : 0; - r[6] |= ((u32) (pr->frame_type_l2 & 0x3)) << 2; - r[6] |= ((u32) (pr->tid & 0x3)); - - r[13] = ((u32) (pr->spmmask_fix_m & 0x3)) << 22; - r[13] |= ((u32) (pr->spn_m & 0x3f)) << 16; - r[13] |= pr->mgnt_vlan_m ? BIT(15) : 0; - r[13] |= pr->dmac_hit_sw_m ? BIT(14) : 0; - r[13] |= pr->not_first_frag_m ? BIT(13) : 0; - r[13] |= ((u32) (pr->frame_type_l4_m & 0x7)) << 10; - r[13] |= ((u32) (pr->frame_type_m & 0x3)) << 8; - r[13] |= pr->otag_fmt_m ? BIT(7) : 0; - r[13] |= pr->itag_fmt_m ? BIT(6) : 0; - r[13] |= pr->otag_exist_m ? BIT(5) : 0; - r[13] |= pr->itag_exist_m ? BIT(4) : 0; - r[13] |= ((u32) (pr->frame_type_l2_m & 0x3)) << 2; - r[13] |= ((u32) (pr->tid_m & 0x3)); - - r[14] = pr->valid ? BIT(31) : 0; - r[14] |= pr->cond_not ? BIT(30) : 0; - r[14] |= pr->cond_and1 ? BIT(29) : 0; - r[14] |= pr->cond_and2 ? BIT(28) : 0; - r[14] |= pr->ivalid ? BIT(27) : 0; - - if (pr->drop) - r[17] = 0x1 << 14; /* Standard drop action */ - else - r[17] = 0; - r[17] |= pr->fwd_sel ? BIT(13) : 0; - r[17] |= pr->ovid_sel ? BIT(12) : 0; - r[17] |= pr->ivid_sel ? BIT(11) : 0; - r[17] |= pr->flt_sel ? BIT(10) : 0; - r[17] |= pr->log_sel ? BIT(9) : 0; - r[17] |= pr->rmk_sel ? BIT(8) : 0; - r[17] |= pr->meter_sel ? BIT(7) : 0; - r[17] |= pr->tagst_sel ? BIT(6) : 0; - r[17] |= pr->mir_sel ? BIT(5) : 0; - r[17] |= pr->nopri_sel ? BIT(4) : 0; - r[17] |= pr->cpupri_sel ? BIT(3) : 0; - r[17] |= pr->otpid_sel ? BIT(2) : 0; - r[17] |= pr->itpid_sel ? BIT(1) : 0; - r[17] |= pr->shaper_sel ? BIT(0) : 0; -} - -static int rtl838x_write_pie_action(u32 r[], struct pie_rule *pr) -{ - u16 *aif = (u16 *)&r[17]; - u16 data; - int fields_used = 0; - - aif--; - - pr_debug("%s, at %08x\n", __func__, (u32)aif); - /* Multiple actions can be linked to a match of a PIE rule, - * they have different precedence depending on their type and this precedence - * defines which Action Information Field (0-4) in the IACL table stores - * the additional data of the action (like e.g. the port number a packet is - * forwarded to) */ - /* TODO: count bits in selectors to limit to a maximum number of actions */ - if (pr->fwd_sel) { /* Forwarding action */ - data = pr->fwd_act << 13; - data |= pr->fwd_data; - data |= pr->bypass_all ? BIT(12) : 0; - data |= pr->bypass_ibc_sc ? BIT(11) : 0; - data |= pr->bypass_igr_stp ? BIT(10) : 0; - *aif-- = data; - fields_used++; - } - - if (pr->ovid_sel) { /* Outer VID action */ - data = (pr->ovid_act & 0x3) << 12; - data |= pr->ovid_data; - *aif-- = data; - fields_used++; - } - - if (pr->ivid_sel) { /* Inner VID action */ - data = (pr->ivid_act & 0x3) << 12; - data |= pr->ivid_data; - *aif-- = data; - fields_used++; - } - - if (pr->flt_sel) { /* Filter action */ - *aif-- = pr->flt_data; - fields_used++; - } - - if (pr->log_sel) { /* Log action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->log_data; - fields_used++; - } - - if (pr->rmk_sel) { /* Remark action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->rmk_data; - fields_used++; - } - - if (pr->meter_sel) { /* Meter action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->meter_data; - fields_used++; - } - - if (pr->tagst_sel) { /* Egress Tag Status action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->tagst_data; - fields_used++; - } - - if (pr->mir_sel) { /* Mirror action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->mir_data; - fields_used++; - } - - if (pr->nopri_sel) { /* Normal Priority action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->nopri_data; - fields_used++; - } - - if (pr->cpupri_sel) { /* CPU Priority action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->nopri_data; - fields_used++; - } - - if (pr->otpid_sel) { /* OTPID action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->otpid_data; - fields_used++; - } - - if (pr->itpid_sel) { /* ITPID action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->itpid_data; - fields_used++; - } - - if (pr->shaper_sel) { /* Traffic shaper action */ - if (fields_used >= 4) - return -1; - *aif-- = pr->shaper_data; - fields_used++; - } - - return 0; -} - -static void rtl838x_read_pie_action(u32 r[], struct pie_rule *pr) -{ - u16 *aif = (u16 *)&r[17]; - - aif--; - - pr_debug("%s, at %08x\n", __func__, (u32)aif); - if (pr->drop) - pr_debug("%s: Action Drop: %d", __func__, pr->drop); - - if (pr->fwd_sel){ /* Forwarding action */ - pr->fwd_act = *aif >> 13; - pr->fwd_data = *aif--; - pr->bypass_all = pr->fwd_data & BIT(12); - pr->bypass_ibc_sc = pr->fwd_data & BIT(11); - pr->bypass_igr_stp = pr->fwd_data & BIT(10); - if (pr->bypass_all || pr->bypass_ibc_sc || pr->bypass_igr_stp) - pr->bypass_sel = true; - } - if (pr->ovid_sel) /* Outer VID action */ - pr->ovid_data = *aif--; - if (pr->ivid_sel) /* Inner VID action */ - pr->ivid_data = *aif--; - if (pr->flt_sel) /* Filter action */ - pr->flt_data = *aif--; - if (pr->log_sel) /* Log action */ - pr->log_data = *aif--; - if (pr->rmk_sel) /* Remark action */ - pr->rmk_data = *aif--; - if (pr->meter_sel) /* Meter action */ - pr->meter_data = *aif--; - if (pr->tagst_sel) /* Egress Tag Status action */ - pr->tagst_data = *aif--; - if (pr->mir_sel) /* Mirror action */ - pr->mir_data = *aif--; - if (pr->nopri_sel) /* Normal Priority action */ - pr->nopri_data = *aif--; - if (pr->cpupri_sel) /* CPU Priority action */ - pr->nopri_data = *aif--; - if (pr->otpid_sel) /* OTPID action */ - pr->otpid_data = *aif--; - if (pr->itpid_sel) /* ITPID action */ - pr->itpid_data = *aif--; - if (pr->shaper_sel) /* Traffic shaper action */ - pr->shaper_data = *aif--; -} - -static void rtl838x_pie_rule_dump_raw(u32 r[]) -{ - pr_info("Raw IACL table entry:\n"); - pr_info("Match : %08x %08x %08x %08x %08x %08x\n", r[0], r[1], r[2], r[3], r[4], r[5]); - pr_info("Fixed : %08x\n", r[6]); - pr_info("Match M: %08x %08x %08x %08x %08x %08x\n", r[7], r[8], r[9], r[10], r[11], r[12]); - pr_info("Fixed M: %08x\n", r[13]); - pr_info("AIF : %08x %08x %08x\n", r[14], r[15], r[16]); - pr_info("Sel : %08x\n", r[17]); -} - -// Currently not used -// static void rtl838x_pie_rule_dump(struct pie_rule *pr) -// { -// pr_info("Drop: %d, fwd: %d, ovid: %d, ivid: %d, flt: %d, log: %d, rmk: %d, meter: %d tagst: %d, mir: %d, nopri: %d, cpupri: %d, otpid: %d, itpid: %d, shape: %d\n", -// pr->drop, pr->fwd_sel, pr->ovid_sel, pr->ivid_sel, pr->flt_sel, pr->log_sel, pr->rmk_sel, pr->log_sel, pr->tagst_sel, pr->mir_sel, pr->nopri_sel, -// pr->cpupri_sel, pr->otpid_sel, pr->itpid_sel, pr->shaper_sel); -// if (pr->fwd_sel) -// pr_info("FWD: %08x\n", pr->fwd_data); -// pr_info("TID: %x, %x\n", pr->tid, pr->tid_m); -// } - -static int rtl838x_pie_rule_read(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr) -{ - /* Read IACL table (1) via register 0 */ - struct table_reg *q = rtl_table_get(RTL8380_TBL_0, 1); - u32 r[18]; - int block = idx / PIE_BLOCK_SIZE; - u32 t_select = sw_r32(RTL838X_ACL_BLK_TMPLTE_CTRL(block)); - - memset(pr, 0, sizeof(*pr)); - rtl_table_read(q, idx); - for (int i = 0; i < 18; i++) - r[i] = sw_r32(rtl_table_data(q, i)); - - rtl_table_release(q); - - rtl838x_read_pie_fixed_fields(r, pr); - if (!pr->valid) - return 0; - - pr_info("%s: template_selectors %08x, tid: %d\n", __func__, t_select, pr->tid); - rtl838x_pie_rule_dump_raw(r); - - rtl838x_read_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 3)) & 0x7]); - - rtl838x_read_pie_action(r, pr); - - return 0; -} - -static int rtl838x_pie_rule_write(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr) -{ - /* Access IACL table (1) via register 0 */ - struct table_reg *q = rtl_table_get(RTL8380_TBL_0, 1); - u32 r[18]; - int err; - int block = idx / PIE_BLOCK_SIZE; - u32 t_select = sw_r32(RTL838X_ACL_BLK_TMPLTE_CTRL(block)); - - pr_debug("%s: %d, t_select: %08x\n", __func__, idx, t_select); - - for (int i = 0; i < 18; i++) - r[i] = 0; - - if (!pr->valid) { - err = -EINVAL; - pr_err("Rule invalid\n"); - goto errout; - } - - rtl838x_write_pie_fixed_fields(r, pr); - - pr_debug("%s: template %d\n", __func__, (t_select >> (pr->tid * 3)) & 0x7); - rtl838x_write_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 3)) & 0x7]); - - err = rtl838x_write_pie_action(r, pr); - if (err) { - pr_err("Rule actions too complex\n"); - goto errout; - } - -/* rtl838x_pie_rule_dump_raw(r); */ - - for (int i = 0; i < 18; i++) - sw_w32(r[i], rtl_table_data(q, i)); - -errout: - rtl_table_write(q, idx); - rtl_table_release(q); - - return err; -} - -static bool rtl838x_pie_templ_has(int t, enum template_field_id field_type) -{ - enum template_field_id ft; - - for (int i = 0; i < N_FIXED_FIELDS; i++) { - ft = fixed_templates[t][i]; - if (field_type == ft) - return true; - } - - return false; -} - -static int rtl838x_pie_verify_template(struct rtl838x_switch_priv *priv, - struct pie_rule *pr, int t, int block) -{ - int i; - - if (!pr->is_ipv6 && pr->sip_m && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_SIP0)) - return -1; - - if (!pr->is_ipv6 && pr->dip_m && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_DIP0)) - return -1; - - if (pr->is_ipv6) { - if ((pr->sip6_m.s6_addr32[0] || - pr->sip6_m.s6_addr32[1] || - pr->sip6_m.s6_addr32[2] || - pr->sip6_m.s6_addr32[3]) && - !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) - return -1; - if ((pr->dip6_m.s6_addr32[0] || - pr->dip6_m.s6_addr32[1] || - pr->dip6_m.s6_addr32[2] || - pr->dip6_m.s6_addr32[3]) && - !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) - return -1; - } - - if (ether_addr_to_u64(pr->smac) && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_SMAC0)) - return -1; - - if (ether_addr_to_u64(pr->dmac) && !rtl838x_pie_templ_has(t, TEMPLATE_FIELD_DMAC0)) - return -1; - - /* TODO: Check more */ - - i = find_first_zero_bit(&priv->pie_use_bm[block * 4], PIE_BLOCK_SIZE); - - if (i >= PIE_BLOCK_SIZE) - return -1; - - return i + PIE_BLOCK_SIZE * block; -} - -static int rtl838x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rule *pr) -{ - int idx, block, j; - - pr_debug("In %s\n", __func__); - - mutex_lock(&priv->pie_mutex); - - for (block = 0; block < priv->n_pie_blocks; block++) { - for (j = 0; j < 3; j++) { - int t = (sw_r32(RTL838X_ACL_BLK_TMPLTE_CTRL(block)) >> (j * 3)) & 0x7; - pr_debug("Testing block %d, template %d, template id %d\n", block, j, t); - idx = rtl838x_pie_verify_template(priv, pr, t, block); - if (idx >= 0) - break; - } - if (j < 3) - break; - } - - if (block >= priv->n_pie_blocks) { - mutex_unlock(&priv->pie_mutex); - return -EOPNOTSUPP; - } - - pr_debug("Using block: %d, index %d, template-id %d\n", block, idx, j); - set_bit(idx, priv->pie_use_bm); - - pr->valid = true; - pr->tid = j; /* Mapped to template number */ - pr->tid_m = 0x3; - pr->id = idx; - - rtl838x_pie_lookup_enable(priv, idx); - rtl838x_pie_rule_write(priv, idx, pr); - - mutex_unlock(&priv->pie_mutex); - - return 0; -} - -static void rtl838x_pie_rule_rm(struct rtl838x_switch_priv *priv, struct pie_rule *pr) -{ - int idx = pr->id; - - rtl838x_pie_rule_del(priv, idx, idx); - clear_bit(idx, priv->pie_use_bm); -} - -/* Initializes the Packet Inspection Engine: - * powers it up, enables default matching templates for all blocks - * and clears all rules possibly installed by u-boot - */ -static void rtl838x_pie_init(struct rtl838x_switch_priv *priv) -{ - u32 template_selectors; - - mutex_init(&priv->pie_mutex); - - /* Enable ACL lookup on all ports, including CPU_PORT */ - for (int i = 0; i <= priv->cpu_port; i++) - sw_w32(1, RTL838X_ACL_PORT_LOOKUP_CTRL(i)); - - /* Power on all PIE blocks */ - for (int i = 0; i < priv->n_pie_blocks; i++) - sw_w32_mask(0, BIT(i), RTL838X_ACL_BLK_PWR_CTRL); - - /* Include IPG in metering */ - sw_w32(1, RTL838X_METER_GLB_CTRL); - - /* Delete all present rules */ - rtl838x_pie_rule_del(priv, 0, priv->n_pie_blocks * PIE_BLOCK_SIZE - 1); - - /* Routing bypasses source port filter: disable write-protection, first */ - sw_w32_mask(0, 3, RTL838X_INT_RW_CTRL); - sw_w32_mask(0, 1, RTL838X_DMY_REG27); - sw_w32_mask(3, 0, RTL838X_INT_RW_CTRL); - - /* Enable predefined templates 0, 1 and 2 for even blocks */ - template_selectors = 0 | (1 << 3) | (2 << 6); - for (int i = 0; i < 6; i += 2) - sw_w32(template_selectors, RTL838X_ACL_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 0, 3 and 4 (IPv6 support) for odd blocks */ - template_selectors = 0 | (3 << 3) | (4 << 6); - for (int i = 1; i < priv->n_pie_blocks; i += 2) - sw_w32(template_selectors, RTL838X_ACL_BLK_TMPLTE_CTRL(i)); - - /* Group each pair of physical blocks together to a logical block */ - sw_w32(0b10101010101, RTL838X_ACL_BLK_GROUP_CTRL); -} - -static u32 rtl838x_packet_cntr_read(int counter) -{ - u32 v; - - /* Read LOG table (3) via register RTL8380_TBL_0 */ - struct table_reg *r = rtl_table_get(RTL8380_TBL_0, 3); - - pr_debug("In %s, id %d\n", __func__, counter); - rtl_table_read(r, counter / 2); - - pr_debug("Registers: %08x %08x\n", - sw_r32(rtl_table_data(r, 0)), sw_r32(rtl_table_data(r, 1))); - /* The table has a size of 2 registers */ - if (counter % 2) - v = sw_r32(rtl_table_data(r, 0)); - else - v = sw_r32(rtl_table_data(r, 1)); - - rtl_table_release(r); - - return v; -} - -static void rtl838x_packet_cntr_clear(int counter) -{ - /* Access LOG table (3) via register RTL8380_TBL_0 */ - struct table_reg *r = rtl_table_get(RTL8380_TBL_0, 3); - - pr_debug("In %s, id %d\n", __func__, counter); - /* The table has a size of 2 registers */ - if (counter % 2) - sw_w32(0, rtl_table_data(r, 0)); - else - sw_w32(0, rtl_table_data(r, 1)); - - rtl_table_write(r, counter / 2); - - rtl_table_release(r); -} - -static void rtl838x_route_read(int idx, struct rtl83xx_route *rt) -{ - /* Read ROUTING table (2) via register RTL8380_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL8380_TBL_1, 2); - - pr_debug("In %s, id %d\n", __func__, idx); - rtl_table_read(r, idx); - - /* The table has a size of 2 registers */ - rt->nh.gw = sw_r32(rtl_table_data(r, 0)); - rt->nh.gw <<= 32; - rt->nh.gw |= sw_r32(rtl_table_data(r, 1)); - - rtl_table_release(r); -} - -static void rtl838x_route_write(int idx, struct rtl83xx_route *rt) -{ - /* Access ROUTING table (2) via register RTL8380_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL8380_TBL_1, 2); - - pr_debug("In %s, id %d, gw: %016llx\n", __func__, idx, rt->nh.gw); - sw_w32(rt->nh.gw >> 32, rtl_table_data(r, 0)); - sw_w32(rt->nh.gw, rtl_table_data(r, 1)); - rtl_table_write(r, idx); - - rtl_table_release(r); -} - -static int rtl838x_l3_setup(struct rtl838x_switch_priv *priv) -{ - /* Nothing to be done */ - return 0; -} - -void rtl838x_vlan_port_keep_tag_set(int port, bool keep_outer, bool keep_inner) -{ - sw_w32(FIELD_PREP(RTL838X_VLAN_PORT_TAG_STS_CTRL_OTAG_STS_MASK, - keep_outer ? RTL838X_VLAN_PORT_TAG_STS_TAGGED : RTL838X_VLAN_PORT_TAG_STS_UNTAG) | - FIELD_PREP(RTL838X_VLAN_PORT_TAG_STS_CTRL_ITAG_STS_MASK, - keep_inner ? RTL838X_VLAN_PORT_TAG_STS_TAGGED : RTL838X_VLAN_PORT_TAG_STS_UNTAG), - RTL838X_VLAN_PORT_TAG_STS_CTRL(port)); -} - -void rtl838x_vlan_port_pvidmode_set(int port, enum pbvlan_type type, enum pbvlan_mode mode) -{ - if (type == PBVLAN_TYPE_INNER) - sw_w32_mask(0x3, mode, RTL838X_VLAN_PORT_PB_VLAN + (port << 2)); - else - sw_w32_mask(0x3 << 14, mode << 14, RTL838X_VLAN_PORT_PB_VLAN + (port << 2)); -} - -void rtl838x_vlan_port_pvid_set(int port, enum pbvlan_type type, int pvid) -{ - if (type == PBVLAN_TYPE_INNER) - sw_w32_mask(0xfff << 2, pvid << 2, RTL838X_VLAN_PORT_PB_VLAN + (port << 2)); - else - sw_w32_mask(0xfff << 16, pvid << 16, RTL838X_VLAN_PORT_PB_VLAN + (port << 2)); -} - -static int rtl838x_set_ageing_time(unsigned long msec) -{ - int t = sw_r32(RTL838X_L2_CTRL_1); - - t &= 0x7FFFFF; - t = t * 128 / 625; /* Aging time in seconds. 0: L2 aging disabled */ - pr_debug("L2 AGING time: %d sec\n", t); - - t = (msec * 625 + 127000) / 128000; - t = t > 0x7FFFFF ? 0x7FFFFF : t; - sw_w32_mask(0x7FFFFF, t, RTL838X_L2_CTRL_1); - pr_debug("Dynamic aging for ports: %x\n", sw_r32(RTL838X_L2_PORT_AGING_OUT)); - - return 0; -} - -static void rtl838x_set_igr_filter(int port, enum igr_filter state) -{ - sw_w32_mask(0x3 << ((port & 0xf)<<1), state << ((port & 0xf)<<1), - RTL838X_VLAN_PORT_IGR_FLTR + (((port >> 4) << 2))); -} - -static void rtl838x_set_egr_filter(int port, enum egr_filter state) -{ - sw_w32_mask(0x1 << (port % 0x1d), state << (port % 0x1d), - RTL838X_VLAN_PORT_EGR_FLTR + (((port / 29) << 2))); -} - -void rtl838x_set_distribution_algorithm(int group, int algoidx, u32 algomsk) -{ - algoidx &= 1; /* RTL838X only supports 2 concurrent algorithms */ - sw_w32_mask(1 << (group % 8), algoidx << (group % 8), - RTL838X_TRK_HASH_IDX_CTRL + ((group >> 3) << 2)); - sw_w32(algomsk, RTL838X_TRK_HASH_CTRL + (algoidx << 2)); -} - -void rtl838x_set_receive_management_action(int port, rma_ctrl_t type, action_type_t action) -{ - switch(type) { - case BPDU: - sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), - RTL838X_RMA_BPDU_CTRL + ((port >> 4) << 2)); - break; - case PTP: - sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), - RTL838X_RMA_PTP_CTRL + ((port >> 4) << 2)); - break; - case LLDP: - sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), - RTL838X_RMA_LLDP_CTRL + ((port >> 4) << 2)); - break; - default: - break; - } -} - -const struct rtl838x_reg rtl838x_reg = { - .mask_port_reg_be = rtl838x_mask_port_reg, - .set_port_reg_be = rtl838x_set_port_reg, - .get_port_reg_be = rtl838x_get_port_reg, - .mask_port_reg_le = rtl838x_mask_port_reg, - .set_port_reg_le = rtl838x_set_port_reg, - .get_port_reg_le = rtl838x_get_port_reg, - .stat_port_rst = RTL838X_STAT_PORT_RST, - .stat_rst = RTL838X_STAT_RST, - .stat_port_std_mib = RTL838X_STAT_PORT_STD_MIB, - .port_iso_ctrl = rtl838x_port_iso_ctrl, - .traffic_enable = rtl838x_traffic_enable, - .traffic_disable = rtl838x_traffic_disable, - .traffic_get = rtl838x_traffic_get, - .traffic_set = rtl838x_traffic_set, - .l2_ctrl_0 = RTL838X_L2_CTRL_0, - .l2_ctrl_1 = RTL838X_L2_CTRL_1, - .l2_port_aging_out = RTL838X_L2_PORT_AGING_OUT, - .set_ageing_time = rtl838x_set_ageing_time, - .smi_poll_ctrl = RTL838X_SMI_POLL_CTRL, - .l2_tbl_flush_ctrl = RTL838X_L2_TBL_FLUSH_CTRL, - .exec_tbl0_cmd = rtl838x_exec_tbl0_cmd, - .exec_tbl1_cmd = rtl838x_exec_tbl1_cmd, - .tbl_access_data_0 = rtl838x_tbl_access_data_0, - .isr_glb_src = RTL838X_ISR_GLB_SRC, - .isr_port_link_sts_chg = RTL838X_ISR_PORT_LINK_STS_CHG, - .imr_port_link_sts_chg = RTL838X_IMR_PORT_LINK_STS_CHG, - .imr_glb = RTL838X_IMR_GLB, - .vlan_tables_read = rtl838x_vlan_tables_read, - .vlan_set_tagged = rtl838x_vlan_set_tagged, - .vlan_set_untagged = rtl838x_vlan_set_untagged, - .mac_force_mode_ctrl = rtl838x_mac_force_mode_ctrl, - .vlan_profile_dump = rtl838x_vlan_profile_dump, - .vlan_profile_setup = rtl838x_vlan_profile_setup, - .vlan_fwd_on_inner = rtl838x_vlan_fwd_on_inner, - .set_vlan_igr_filter = rtl838x_set_igr_filter, - .set_vlan_egr_filter = rtl838x_set_egr_filter, - .enable_learning = rtl838x_enable_learning, - .enable_flood = rtl838x_enable_flood, - .enable_mcast_flood = rtl838x_enable_mcast_flood, - .enable_bcast_flood = rtl838x_enable_bcast_flood, - .set_static_move_action = rtl838x_set_static_move_action, - .stp_get = rtl838x_stp_get, - .stp_set = rtl838x_stp_set, - .mac_port_ctrl = rtl838x_mac_port_ctrl, - .l2_port_new_salrn = rtl838x_l2_port_new_salrn, - .l2_port_new_sa_fwd = rtl838x_l2_port_new_sa_fwd, - .mir_ctrl = RTL838X_MIR_CTRL, - .mir_dpm = RTL838X_MIR_DPM_CTRL, - .mir_spm = RTL838X_MIR_SPM_CTRL, - .mac_link_sts = RTL838X_MAC_LINK_STS, - .mac_link_dup_sts = RTL838X_MAC_LINK_DUP_STS, - .mac_link_spd_sts = rtl838x_mac_link_spd_sts, - .mac_rx_pause_sts = RTL838X_MAC_RX_PAUSE_STS, - .mac_tx_pause_sts = RTL838X_MAC_TX_PAUSE_STS, - .read_l2_entry_using_hash = rtl838x_read_l2_entry_using_hash, - .write_l2_entry_using_hash = rtl838x_write_l2_entry_using_hash, - .read_cam = rtl838x_read_cam, - .write_cam = rtl838x_write_cam, - .vlan_port_keep_tag_set = rtl838x_vlan_port_keep_tag_set, - .vlan_port_pvidmode_set = rtl838x_vlan_port_pvidmode_set, - .vlan_port_pvid_set = rtl838x_vlan_port_pvid_set, - .trk_mbr_ctr = rtl838x_trk_mbr_ctr, - .rma_bpdu_fld_pmask = RTL838X_RMA_BPDU_FLD_PMSK, - .spcl_trap_eapol_ctrl = RTL838X_SPCL_TRAP_EAPOL_CTRL, - .init_eee = rtl838x_init_eee, - .port_eee_set = rtl838x_port_eee_set, - .eee_port_ability = rtl838x_eee_port_ability, - .l2_hash_seed = rtl838x_l2_hash_seed, - .l2_hash_key = rtl838x_l2_hash_key, - .read_mcast_pmask = rtl838x_read_mcast_pmask, - .write_mcast_pmask = rtl838x_write_mcast_pmask, - .pie_init = rtl838x_pie_init, - .pie_rule_read = rtl838x_pie_rule_read, - .pie_rule_write = rtl838x_pie_rule_write, - .pie_rule_add = rtl838x_pie_rule_add, - .pie_rule_rm = rtl838x_pie_rule_rm, - .l2_learning_setup = rtl838x_l2_learning_setup, - .packet_cntr_read = rtl838x_packet_cntr_read, - .packet_cntr_clear = rtl838x_packet_cntr_clear, - .route_read = rtl838x_route_read, - .route_write = rtl838x_route_write, - .l3_setup = rtl838x_l3_setup, - .set_distribution_algorithm = rtl838x_set_distribution_algorithm, - .set_receive_management_action = rtl838x_set_receive_management_action, -}; - -irqreturn_t rtl838x_switch_irq(int irq, void *dev_id) -{ - struct dsa_switch *ds = dev_id; - u32 status = sw_r32(RTL838X_ISR_GLB_SRC); - u32 ports = sw_r32(RTL838X_ISR_PORT_LINK_STS_CHG); - u32 link; - - /* Clear status */ - sw_w32(ports, RTL838X_ISR_PORT_LINK_STS_CHG); - pr_info("RTL8380 Link change: status: %x, ports %x\n", status, ports); - - for (int i = 0; i < 28; i++) { - if (ports & BIT(i)) { - link = sw_r32(RTL838X_MAC_LINK_STS); - if (link & BIT(i)) - dsa_port_phylink_mac_change(ds, i, true); - else - dsa_port_phylink_mac_change(ds, i, false); - } - } - - return IRQ_HANDLED; -} - -int rtl838x_smi_wait_op(int timeout) -{ - int ret = 0; - u32 val; - - ret = readx_poll_timeout(sw_r32, RTL838X_SMI_ACCESS_PHY_CTRL_1, - val, !(val & 0x1), 20, timeout); - if (ret) - pr_err("%s: timeout\n", __func__); - - return ret; -} - -/* Reads a register in a page from the PHY */ -int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val) -{ - int err; - u32 v; - u32 park_page; - - if (port > 31) { - *val = 0xffff; - return 0; - } - - if (page > 4095 || reg > 31) - return -ENOTSUPP; - - mutex_lock(&smi_lock); - - err = rtl838x_smi_wait_op(100000); - if (err) - goto errout; - - sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); - - park_page = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & ((0x1f << 15) | 0x2); - v = reg << 20 | page << 3; - sw_w32(v | park_page, RTL838X_SMI_ACCESS_PHY_CTRL_1); - sw_w32_mask(0, 1, RTL838X_SMI_ACCESS_PHY_CTRL_1); - - err = rtl838x_smi_wait_op(100000); - if (err) - goto errout; - - *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff; - - err = 0; - -errout: - mutex_unlock(&smi_lock); - - return err; -} - -/* Write to a register in a page of the PHY */ -int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val) -{ - int err; - u32 v; - u32 park_page; - - val &= 0xffff; - if (port > 31 || page > 4095 || reg > 31) - return -ENOTSUPP; - - mutex_lock(&smi_lock); - err = rtl838x_smi_wait_op(100000); - if (err) - goto errout; - - sw_w32(BIT(port), RTL838X_SMI_ACCESS_PHY_CTRL_0); - mdelay(10); - - sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); - - park_page = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_1) & ((0x1f << 15) | 0x2); - v = reg << 20 | page << 3 | 0x4; - sw_w32(v | park_page, RTL838X_SMI_ACCESS_PHY_CTRL_1); - sw_w32_mask(0, 1, RTL838X_SMI_ACCESS_PHY_CTRL_1); - - err = rtl838x_smi_wait_op(100000); - if (err) - goto errout; - - err = 0; - -errout: - mutex_unlock(&smi_lock); - - return err; -} - -/* Read an mmd register of a PHY */ -int rtl838x_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val) -{ - int err; - u32 v; - - mutex_lock(&smi_lock); - - err = rtl838x_smi_wait_op(100000); - if (err) - goto errout; - - sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0); - mdelay(10); - - sw_w32_mask(0xffff0000, port << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); - - v = addr << 16 | reg; - sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_3); - - /* mmd-access | read | cmd-start */ - v = 1 << 1 | 0 << 2 | 1; - sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1); - - err = rtl838x_smi_wait_op(100000); - if (err) - goto errout; - - *val = sw_r32(RTL838X_SMI_ACCESS_PHY_CTRL_2) & 0xffff; - - err = 0; - -errout: - mutex_unlock(&smi_lock); - - return err; -} - -/* Write to an mmd register of a PHY */ -int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val) -{ - int err; - u32 v; - - pr_debug("MMD write: port %d, dev %d, reg %d, val %x\n", port, addr, reg, val); - val &= 0xffff; - mutex_lock(&smi_lock); - - err = rtl838x_smi_wait_op(100000); - if (err) - goto errout; - - sw_w32(1 << port, RTL838X_SMI_ACCESS_PHY_CTRL_0); - mdelay(10); - - sw_w32_mask(0xffff0000, val << 16, RTL838X_SMI_ACCESS_PHY_CTRL_2); - - sw_w32_mask(0x1f << 16, addr << 16, RTL838X_SMI_ACCESS_PHY_CTRL_3); - sw_w32_mask(0xffff, reg, RTL838X_SMI_ACCESS_PHY_CTRL_3); - /* mmd-access | write | cmd-start */ - v = 1 << 1 | 1 << 2 | 1; - sw_w32(v, RTL838X_SMI_ACCESS_PHY_CTRL_1); - - err = rtl838x_smi_wait_op(100000); - if (err) - goto errout; - - err = 0; - -errout: - mutex_unlock(&smi_lock); - return err; -} - -void rtl8380_get_version(struct rtl838x_switch_priv *priv) -{ - u32 rw_save, info_save; - u32 info; - - rw_save = sw_r32(RTL838X_INT_RW_CTRL); - sw_w32(rw_save | 0x3, RTL838X_INT_RW_CTRL); - - info_save = sw_r32(RTL838X_CHIP_INFO); - sw_w32(info_save | 0xA0000000, RTL838X_CHIP_INFO); - - info = sw_r32(RTL838X_CHIP_INFO); - sw_w32(info_save, RTL838X_CHIP_INFO); - sw_w32(rw_save, RTL838X_INT_RW_CTRL); - - if ((info & 0xFFFF) == 0x6275) { - if (((info >> 16) & 0x1F) == 0x1) - priv->version = RTL8380_VERSION_A; - else if (((info >> 16) & 0x1F) == 0x2) - priv->version = RTL8380_VERSION_B; - else - priv->version = RTL8380_VERSION_B; - } else { - priv->version = '-'; - } -} - -void rtl838x_vlan_profile_dump(int profile) -{ - u32 p; - - if (profile < 0 || profile > 7) - return; - - p = sw_r32(RTL838X_VLAN_PROFILE(profile)); - - pr_info("VLAN profile %d: L2 learning: %d, UNKN L2MC FLD PMSK %d, \ - UNKN IPMC FLD PMSK %d, UNKN IPv6MC FLD PMSK: %d", - profile, p & 1, (p >> 1) & 0x1ff, (p >> 10) & 0x1ff, (p >> 19) & 0x1ff); -} - -void rtl8380_sds_rst(int mac) -{ - u32 offset = (mac == 24) ? 0 : 0x100; - - sw_w32_mask(1 << 11, 0, RTL838X_SDS4_FIB_REG0 + offset); - sw_w32_mask(0x3, 0, RTL838X_SDS4_REG28 + offset); - sw_w32_mask(0x3, 0x3, RTL838X_SDS4_REG28 + offset); - sw_w32_mask(0, 0x1 << 6, RTL838X_SDS4_DUMMY0 + offset); - sw_w32_mask(0x1 << 6, 0, RTL838X_SDS4_DUMMY0 + offset); - pr_debug("SERDES reset: %d\n", mac); -} - -int rtl8380_sds_power(int mac, int val) -{ - u32 mode = (val == 1) ? 0x4 : 0x9; - u32 offset = (mac == 24) ? 5 : 0; - - if ((mac != 24) && (mac != 26)) { - pr_err("%s: not a fibre port: %d\n", __func__, mac); - return -1; - } - - sw_w32_mask(0x1f << offset, mode << offset, RTL838X_SDS_MODE_SEL); - - rtl8380_sds_rst(mac); - - return 0; -} diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h deleted file mode 100644 index 261af32bb4..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h +++ /dev/null @@ -1,1103 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef _RTL838X_H -#define _RTL838X_H - -#include - -/* Register definition */ -#define RTL838X_MAC_PORT_CTRL(port) (0xd560 + (((port) << 7))) -#define RTL839X_MAC_PORT_CTRL(port) (0x8004 + (((port) << 7))) -#define RTL930X_MAC_PORT_CTRL(port) (0x3260 + (((port) << 6))) -#define RTL931X_MAC_PORT_CTRL (0x6004) - -#define RTL930X_MAC_L2_PORT_CTRL(port) (0x3268 + (((port) << 6))) -#define RTL931X_MAC_L2_PORT_CTRL (0x6000) - -#define RTL838X_RST_GLB_CTRL_0 (0x003c) - -#define RTL838X_MAC_FORCE_MODE_CTRL (0xa104) -#define RTL839X_MAC_FORCE_MODE_CTRL (0x02bc) -#define RTL930X_MAC_FORCE_MODE_CTRL (0xCA1C) -#define RTL931X_MAC_FORCE_MODE_CTRL (0x0DCC) - -#define RTL838X_DMY_REG31 (0x3b28) -#define RTL838X_SDS_MODE_SEL (0x0028) -#define RTL838X_SDS_CFG_REG (0x0034) -#define RTL838X_INT_MODE_CTRL (0x005c) -#define RTL838X_CHIP_INFO (0x00d8) -#define RTL839X_CHIP_INFO (0x0ff4) -#define RTL838X_PORT_ISO_CTRL(port) (0x4100 + ((port) << 2)) -#define RTL839X_PORT_ISO_CTRL(port) (0x1400 + ((port) << 3)) - -/* Packet statistics */ -#define RTL838X_STAT_PORT_STD_MIB (0x1200) -#define RTL839X_STAT_PORT_STD_MIB (0xC000) -#define RTL930X_STAT_PORT_MIB_CNTR (0x0664) -#define RTL838X_STAT_RST (0x3100) -#define RTL839X_STAT_RST (0xF504) -#define RTL930X_STAT_RST (0x3240) -#define RTL931X_STAT_RST (0x7ef4) -#define RTL838X_STAT_PORT_RST (0x3104) -#define RTL839X_STAT_PORT_RST (0xF508) -#define RTL930X_STAT_PORT_RST (0x3244) -#define RTL931X_STAT_PORT_RST (0x7ef8) -#define RTL838X_STAT_CTRL (0x3108) -#define RTL839X_STAT_CTRL (0x04cc) -#define RTL930X_STAT_CTRL (0x3248) -#define RTL931X_STAT_CTRL (0x5720) - -/* Registers of the internal Serdes of the 8390 */ -#define RTL8390_SDS0_1_XSG0 (0xA000) -#define RTL8390_SDS0_1_XSG1 (0xA100) -#define RTL839X_SDS12_13_XSG0 (0xB800) -#define RTL839X_SDS12_13_XSG1 (0xB900) -#define RTL839X_SDS12_13_PWR0 (0xb880) -#define RTL839X_SDS12_13_PWR1 (0xb980) - -/* Registers of the internal Serdes of the 8380 */ -#define RTL838X_SDS4_FIB_REG0 (0xF800) -#define RTL838X_SDS4_REG28 (0xef80) -#define RTL838X_SDS4_DUMMY0 (0xef8c) -#define RTL838X_SDS5_EXT_REG6 (0xf18c) - -/* VLAN registers */ -#define RTL838X_VLAN_CTRL (0x3A74) -#define RTL838X_VLAN_PROFILE(idx) (0x3A88 + ((idx) << 2)) -#define RTL838X_VLAN_PORT_EGR_FLTR (0x3A84) -#define RTL838X_VLAN_PORT_PB_VLAN (0x3C00) -#define RTL838X_VLAN_PORT_IGR_FLTR (0x3A7C) - -#define RTL839X_VLAN_PROFILE(idx) (0x25C0 + (((idx) << 3))) -#define RTL839X_VLAN_CTRL (0x26D4) -#define RTL839X_VLAN_PORT_PB_VLAN (0x26D8) -#define RTL839X_VLAN_PORT_IGR_FLTR (0x27B4) -#define RTL839X_VLAN_PORT_EGR_FLTR (0x27C4) - -#define RTL930X_VLAN_PROFILE_SET(idx) (0x9c60 + (((idx) * 20))) -#define RTL930X_VLAN_CTRL (0x82D4) -#define RTL930X_VLAN_PORT_PB_VLAN (0x82D8) -#define RTL930X_VLAN_PORT_IGR_FLTR (0x83C0) -#define RTL930X_VLAN_PORT_EGR_FLTR (0x83C8) - -#define RTL931X_VLAN_PROFILE_SET(idx) (0x9800 + (((idx) * 28))) -#define RTL931X_VLAN_CTRL (0x94E4) -#define RTL931X_VLAN_PORT_IGR_CTRL (0x94E8) -#define RTL931X_VLAN_PORT_IGR_FLTR (0x96B4) -#define RTL931X_VLAN_PORT_EGR_FLTR (0x96C4) - -/* Table access registers */ -#define RTL838X_TBL_ACCESS_CTRL_0 (0x6914) -#define RTL838X_TBL_ACCESS_DATA_0(idx) (0x6918 + ((idx) << 2)) -#define RTL838X_TBL_ACCESS_CTRL_1 (0xA4C8) -#define RTL838X_TBL_ACCESS_DATA_1(idx) (0xA4CC + ((idx) << 2)) - -#define RTL839X_TBL_ACCESS_CTRL_0 (0x1190) -#define RTL839X_TBL_ACCESS_DATA_0(idx) (0x1194 + ((idx) << 2)) -#define RTL839X_TBL_ACCESS_CTRL_1 (0x6b80) -#define RTL839X_TBL_ACCESS_DATA_1(idx) (0x6b84 + ((idx) << 2)) -#define RTL839X_TBL_ACCESS_CTRL_2 (0x611C) -#define RTL839X_TBL_ACCESS_DATA_2(i) (0x6120 + (((i) << 2))) - -#define RTL930X_TBL_ACCESS_CTRL_0 (0xB340) -#define RTL930X_TBL_ACCESS_DATA_0(idx) (0xB344 + ((idx) << 2)) -#define RTL930X_TBL_ACCESS_CTRL_1 (0xB3A0) -#define RTL930X_TBL_ACCESS_DATA_1(idx) (0xB3A4 + ((idx) << 2)) -#define RTL930X_TBL_ACCESS_CTRL_2 (0xCE04) -#define RTL930X_TBL_ACCESS_DATA_2(i) (0xCE08 + (((i) << 2))) - -#define RTL931X_TBL_ACCESS_CTRL_0 (0x8500) -#define RTL931X_TBL_ACCESS_DATA_0(idx) (0x8508 + ((idx) << 2)) -#define RTL931X_TBL_ACCESS_CTRL_1 (0x40C0) -#define RTL931X_TBL_ACCESS_DATA_1(idx) (0x40C4 + ((idx) << 2)) -#define RTL931X_TBL_ACCESS_CTRL_2 (0x8528) -#define RTL931X_TBL_ACCESS_DATA_2(i) (0x852C + (((i) << 2))) -#define RTL931X_TBL_ACCESS_CTRL_3 (0x0200) -#define RTL931X_TBL_ACCESS_DATA_3(i) (0x0204 + (((i) << 2))) -#define RTL931X_TBL_ACCESS_CTRL_4 (0x20DC) -#define RTL931X_TBL_ACCESS_DATA_4(i) (0x20E0 + (((i) << 2))) -#define RTL931X_TBL_ACCESS_CTRL_5 (0x7E1C) -#define RTL931X_TBL_ACCESS_DATA_5(i) (0x7E20 + (((i) << 2))) - -/* MAC handling */ -#define RTL838X_MAC_LINK_STS (0xa188) -#define RTL839X_MAC_LINK_STS (0x0390) -#define RTL930X_MAC_LINK_STS (0xCB10) -#define RTL931X_MAC_LINK_STS (0x0EC0) -#define RTL838X_MAC_LINK_SPD_STS(p) (0xa190 + (((p >> 4) << 2))) -#define RTL839X_MAC_LINK_SPD_STS(p) (0x03a0 + (((p >> 4) << 2))) -#define RTL930X_MAC_LINK_SPD_STS(p) (0xCB18 + (((p >> 3) << 2))) -#define RTL931X_MAC_LINK_SPD_STS (0x0ED0) -#define RTL838X_MAC_LINK_DUP_STS (0xa19c) -#define RTL839X_MAC_LINK_DUP_STS (0x03b0) -#define RTL930X_MAC_LINK_DUP_STS (0xCB28) -#define RTL931X_MAC_LINK_DUP_STS (0x0EF0) -#define RTL838X_MAC_TX_PAUSE_STS (0xa1a0) -#define RTL839X_MAC_TX_PAUSE_STS (0x03b8) -#define RTL930X_MAC_TX_PAUSE_STS (0xCB2C) -#define RTL931X_MAC_TX_PAUSE_STS (0x0EF8) -#define RTL838X_MAC_RX_PAUSE_STS (0xa1a4) -#define RTL839X_MAC_RX_PAUSE_STS (0x03c0) -#define RTL930X_MAC_RX_PAUSE_STS (0xCB30) -#define RTL931X_MAC_RX_PAUSE_STS (0x0F00) -#define RTL930X_MAC_LINK_MEDIA_STS (0xCB14) -#define RTL931X_MAC_LINK_MEDIA_STS (0x0EC8) - -/* MAC link state bits */ -#define RTL838X_FORCE_EN (1 << 0) -#define RTL838X_FORCE_LINK_EN (1 << 1) -#define RTL838X_NWAY_EN (1 << 2) -#define RTL838X_DUPLEX_MODE (1 << 3) -#define RTL838X_TX_PAUSE_EN (1 << 6) -#define RTL838X_RX_PAUSE_EN (1 << 7) -#define RTL838X_MAC_FORCE_FC_EN (1 << 8) - -#define RTL839X_FORCE_EN (1 << 0) -#define RTL839X_FORCE_LINK_EN (1 << 1) -#define RTL839X_DUPLEX_MODE (1 << 2) -#define RTL839X_TX_PAUSE_EN (1 << 5) -#define RTL839X_RX_PAUSE_EN (1 << 6) -#define RTL839X_MAC_FORCE_FC_EN (1 << 7) - -#define RTL930X_FORCE_EN (1 << 0) -#define RTL930X_FORCE_LINK_EN (1 << 1) -#define RTL930X_DUPLEX_MODE (1 << 2) -#define RTL930X_TX_PAUSE_EN (1 << 7) -#define RTL930X_RX_PAUSE_EN (1 << 8) -#define RTL930X_MAC_FORCE_FC_EN (1 << 9) - -#define RTL931X_FORCE_EN (1 << 9) -#define RTL931X_FORCE_LINK_EN (1 << 0) -#define RTL931X_DUPLEX_MODE (1 << 2) -#define RTL931X_MAC_FORCE_FC_EN (1 << 4) -#define RTL931X_TX_PAUSE_EN (1 << 16) -#define RTL931X_RX_PAUSE_EN (1 << 17) - -/* EEE */ -#define RTL838X_MAC_EEE_ABLTY (0xa1a8) -#define RTL838X_EEE_PORT_TX_EN (0x014c) -#define RTL838X_EEE_PORT_RX_EN (0x0150) -#define RTL838X_EEE_CLK_STOP_CTRL (0x0148) -#define RTL838X_EEE_TX_TIMER_GIGA_CTRL (0xaa04) -#define RTL838X_EEE_TX_TIMER_GELITE_CTRL (0xaa08) - -#define RTL839X_EEE_TX_TIMER_GELITE_CTRL (0x042C) -#define RTL839X_EEE_TX_TIMER_GIGA_CTRL (0x0430) -#define RTL839X_EEE_TX_TIMER_10G_CTRL (0x0434) -#define RTL839X_EEE_CTRL(p) (0x8008 + ((p) << 7)) -#define RTL839X_MAC_EEE_ABLTY (0x03C8) - -#define RTL930X_MAC_EEE_ABLTY (0xCB34) -#define RTL930X_EEE_CTRL(p) (0x3274 + ((p) << 6)) -#define RTL930X_EEEP_PORT_CTRL(p) (0x3278 + ((p) << 6)) - -/* L2 functionality */ -#define RTL838X_L2_CTRL_0 (0x3200) -#define RTL839X_L2_CTRL_0 (0x3800) -#define RTL930X_L2_CTRL (0x8FD8) -#define RTL931X_L2_CTRL (0xC800) -#define RTL838X_L2_CTRL_1 (0x3204) -#define RTL839X_L2_CTRL_1 (0x3804) -#define RTL930X_L2_AGE_CTRL (0x8FDC) -#define RTL931X_L2_AGE_CTRL (0xC804) -#define RTL838X_L2_PORT_AGING_OUT (0x3358) -#define RTL839X_L2_PORT_AGING_OUT (0x3b74) -#define RTL930X_L2_PORT_AGE_CTRL (0x8FE0) -#define RTL931X_L2_PORT_AGE_CTRL (0xc808) -#define RTL838X_TBL_ACCESS_L2_CTRL (0x6900) -#define RTL839X_TBL_ACCESS_L2_CTRL (0x1180) -#define RTL930X_TBL_ACCESS_L2_CTRL (0xB320) -#define RTL930X_TBL_ACCESS_L2_METHOD_CTRL (0xB324) -#define RTL838X_TBL_ACCESS_L2_DATA(idx) (0x6908 + ((idx) << 2)) -#define RTL839X_TBL_ACCESS_L2_DATA(idx) (0x1184 + ((idx) << 2)) -#define RTL930X_TBL_ACCESS_L2_DATA(idx) (0xab08 + ((idx) << 2)) - -#define RTL838X_L2_TBL_FLUSH_CTRL (0x3370) -#define RTL839X_L2_TBL_FLUSH_CTRL (0x3ba0) -#define RTL930X_L2_TBL_FLUSH_CTRL (0x9404) -#define RTL931X_L2_TBL_FLUSH_CTRL (0xCD9C) - -#define RTL838X_L2_LRN_CONSTRT (0x329C) -#define RTL839X_L2_LRN_CONSTRT (0x3910) -#define RTL930X_L2_LRN_CONSTRT_CTRL (0x909c) -#define RTL931X_L2_LRN_CONSTRT_CTRL (0xC964) - -#define RTL838X_L2_FLD_PMSK (0x3288) -#define RTL839X_L2_FLD_PMSK (0x38EC) -#define RTL930X_L2_BC_FLD_PMSK (0x9068) -#define RTL931X_L2_BC_FLD_PMSK (0xC8FC) - -#define RTL930X_L2_UNKN_UC_FLD_PMSK (0x9064) -#define RTL931X_L2_UNKN_UC_FLD_PMSK (0xC8F4) - -#define RTL838X_L2_LRN_CONSTRT_EN (0x3368) -#define RTL838X_L2_PORT_LRN_CONSTRT (0x32A0) -#define RTL839X_L2_PORT_LRN_CONSTRT (0x3914) - -#define RTL838X_L2_PORT_NEW_SALRN(p) (0x328c + (((p >> 4) << 2))) -#define RTL839X_L2_PORT_NEW_SALRN(p) (0x38F0 + (((p >> 4) << 2))) -#define RTL930X_L2_PORT_SALRN(p) (0x8FEC + (((p >> 4) << 2))) -#define RTL931X_L2_PORT_NEW_SALRN(p) (0xC820 + (((p >> 4) << 2))) - -#define SALRN_PORT_SHIFT(p) ((p % 16) * 2) -#define SALRN_MODE_MASK 0x3 -#define SALRN_MODE_HARDWARE 0 -#define SALRN_MODE_DISABLED 2 - -#define RTL838X_L2_PORT_NEW_SA_FWD(p) (0x3294 + (((p >> 4) << 2))) -#define RTL839X_L2_PORT_NEW_SA_FWD(p) (0x3900 + (((p >> 4) << 2))) -#define RTL930X_L2_PORT_NEW_SA_FWD(p) (0x8FF4 + (((p / 10) << 2))) -#define RTL931X_L2_PORT_NEW_SA_FWD(p) (0xC830 + (((p / 10) << 2))) - -#define RTL838X_L2_PORT_MV_ACT(p) (0x335c + (((p >> 4) << 2))) -#define RTL839X_L2_PORT_MV_ACT(p) (0x3b80 + (((p >> 4) << 2))) - -#define RTL838X_L2_PORT_STATIC_MV_ACT(p) (0x327c + (((p >> 4) << 2))) -#define RTL839X_L2_PORT_STATIC_MV_ACT(p) (0x38dc + (((p >> 4) << 2))) - -#define MV_ACT_PORT_SHIFT(p) ((p % 16) * 2) -#define MV_ACT_MASK 0x3 -#define MV_ACT_FORWARD 0 -#define MV_ACT_DROP 1 -#define MV_ACT_TRAP2CPU 2 -#define MV_ACT_COPY2CPU 3 - -#define RTL930X_ST_CTRL (0x8798) - -#define RTL930X_L2_PORT_SABLK_CTRL (0x905c) -#define RTL930X_L2_PORT_DABLK_CTRL (0x9060) - -#define RTL838X_L2_PORT_LM_ACT(p) (0x3208 + ((p) << 2)) -#define RTL838X_VLAN_PORT_FWD (0x3A78) -#define RTL839X_VLAN_PORT_FWD (0x27AC) -#define RTL930X_VLAN_PORT_FWD (0x834C) -#define RTL931X_VLAN_PORT_FWD (0x95CC) -#define RTL838X_VLAN_FID_CTRL (0x3aa8) - -/* Port Mirroring */ -#define RTL838X_MIR_CTRL (0x5D00) -#define RTL838X_MIR_DPM_CTRL (0x5D20) -#define RTL838X_MIR_SPM_CTRL (0x5D10) - -#define RTL839X_MIR_CTRL (0x2500) -#define RTL839X_MIR_DPM_CTRL (0x2530) -#define RTL839X_MIR_SPM_CTRL (0x2510) - -#define RTL930X_MIR_CTRL (0xA2A0) -#define RTL930X_MIR_DPM_CTRL (0xA2C0) -#define RTL930X_MIR_SPM_CTRL (0xA2B0) - -#define RTL931X_MIR_CTRL (0xAF00) -#define RTL931X_MIR_DPM_CTRL (0xAF30) -#define RTL931X_MIR_SPM_CTRL (0xAF10) - -/* Storm/rate control and scheduling */ -#define RTL838X_STORM_CTRL (0x4700) -#define RTL839X_STORM_CTRL (0x1800) -#define RTL838X_STORM_CTRL_LB_CTRL(p) (0x4884 + (((p) << 2))) -#define RTL838X_STORM_CTRL_BURST_PPS_0 (0x4874) -#define RTL838X_STORM_CTRL_BURST_PPS_1 (0x4878) -#define RTL838X_STORM_CTRL_BURST_0 (0x487c) -#define RTL838X_STORM_CTRL_BURST_1 (0x4880) -#define RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_0 (0x1804) -#define RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_1 (0x1808) -#define RTL838X_SCHED_CTRL (0xB980) -#define RTL839X_SCHED_CTRL (0x60F4) -#define RTL838X_SCHED_LB_TICK_TKN_CTRL_0 (0xAD58) -#define RTL838X_SCHED_LB_TICK_TKN_CTRL_1 (0xAD5C) -#define RTL839X_SCHED_LB_TICK_TKN_CTRL_0 (0x1804) -#define RTL839X_SCHED_LB_TICK_TKN_CTRL_1 (0x1808) -#define RTL839X_STORM_CTRL_SPCL_LB_TICK_TKN_CTRL (0x2000) -#define RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_0 (0x1604) -#define RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_1 (0x1608) -#define RTL839X_SCHED_LB_TICK_TKN_CTRL (0x60F8) -#define RTL839X_SCHED_LB_TICK_TKN_PPS_CTRL (0x6200) -#define RTL838X_SCHED_LB_THR (0xB984) -#define RTL839X_SCHED_LB_THR (0x60FC) -#define RTL838X_SCHED_P_EGR_RATE_CTRL(p) (0xC008 + (((p) << 7))) -#define RTL838X_SCHED_Q_EGR_RATE_CTRL(p, q) (0xC00C + (p << 7) + (((q) << 2))) -#define RTL838X_STORM_CTRL_PORT_BC_EXCEED (0x470C) -#define RTL838X_STORM_CTRL_PORT_MC_EXCEED (0x4710) -#define RTL838X_STORM_CTRL_PORT_UC_EXCEED (0x4714) -#define RTL839X_STORM_CTRL_PORT_BC_EXCEED(p) (0x180c + (((p >> 5) << 2))) -#define RTL839X_STORM_CTRL_PORT_MC_EXCEED(p) (0x1814 + (((p >> 5) << 2))) -#define RTL839X_STORM_CTRL_PORT_UC_EXCEED(p) (0x181c + (((p >> 5) << 2))) -#define RTL838X_STORM_CTRL_PORT_UC(p) (0x4718 + (((p) << 2))) -#define RTL838X_STORM_CTRL_PORT_MC(p) (0x478c + (((p) << 2))) -#define RTL838X_STORM_CTRL_PORT_BC(p) (0x4800 + (((p) << 2))) -#define RTL839X_STORM_CTRL_PORT_UC_0(p) (0x185C + (((p) << 3))) -#define RTL839X_STORM_CTRL_PORT_UC_1(p) (0x1860 + (((p) << 3))) -#define RTL839X_STORM_CTRL_PORT_MC_0(p) (0x19FC + (((p) << 3))) -#define RTL839X_STORM_CTRL_PORT_MC_1(p) (0x1a00 + (((p) << 3))) -#define RTL839X_STORM_CTRL_PORT_BC_0(p) (0x1B9C + (((p) << 3))) -#define RTL839X_STORM_CTRL_PORT_BC_1(p) (0x1BA0 + (((p) << 3))) -#define RTL839X_TBL_ACCESS_CTRL_2 (0x611C) -#define RTL839X_TBL_ACCESS_DATA_2(i) (0x6120 + (((i) << 2))) -#define RTL839X_IGR_BWCTRL_PORT_CTRL_10G_0(p) (0x1618 + (((p) << 3))) -#define RTL839X_IGR_BWCTRL_PORT_CTRL_10G_1(p) (0x161C + (((p) << 3))) -#define RTL839X_IGR_BWCTRL_PORT_CTRL_0(p) (0x1640 + (((p) << 3))) -#define RTL839X_IGR_BWCTRL_PORT_CTRL_1(p) (0x1644 + (((p) << 3))) -#define RTL839X_IGR_BWCTRL_CTRL_LB_THR (0x1614) - -/* Link aggregation (Trunking) */ -#define TRUNK_DISTRIBUTION_ALGO_SPA_BIT 0x01 -#define TRUNK_DISTRIBUTION_ALGO_SMAC_BIT 0x02 -#define TRUNK_DISTRIBUTION_ALGO_DMAC_BIT 0x04 -#define TRUNK_DISTRIBUTION_ALGO_SIP_BIT 0x08 -#define TRUNK_DISTRIBUTION_ALGO_DIP_BIT 0x10 -#define TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT 0x20 -#define TRUNK_DISTRIBUTION_ALGO_DST_L4PORT_BIT 0x40 -#define TRUNK_DISTRIBUTION_ALGO_MASKALL 0x7F - -#define TRUNK_DISTRIBUTION_ALGO_L2_SPA_BIT 0x01 -#define TRUNK_DISTRIBUTION_ALGO_L2_SMAC_BIT 0x02 -#define TRUNK_DISTRIBUTION_ALGO_L2_DMAC_BIT 0x04 -#define TRUNK_DISTRIBUTION_ALGO_L2_VLAN_BIT 0x08 -#define TRUNK_DISTRIBUTION_ALGO_L2_MASKALL 0xF - -#define TRUNK_DISTRIBUTION_ALGO_L3_SPA_BIT 0x01 -#define TRUNK_DISTRIBUTION_ALGO_L3_SMAC_BIT 0x02 -#define TRUNK_DISTRIBUTION_ALGO_L3_DMAC_BIT 0x04 -#define TRUNK_DISTRIBUTION_ALGO_L3_VLAN_BIT 0x08 -#define TRUNK_DISTRIBUTION_ALGO_L3_SIP_BIT 0x10 -#define TRUNK_DISTRIBUTION_ALGO_L3_DIP_BIT 0x20 -#define TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT 0x40 -#define TRUNK_DISTRIBUTION_ALGO_L3_DST_L4PORT_BIT 0x80 -#define TRUNK_DISTRIBUTION_ALGO_L3_PROTO_BIT 0x100 -#define TRUNK_DISTRIBUTION_ALGO_L3_FLOW_LABEL_BIT 0x200 -#define TRUNK_DISTRIBUTION_ALGO_L3_MASKALL 0x3FF - -#define RTL838X_TRK_MBR_CTR (0x3E00) -#define RTL838X_TRK_HASH_IDX_CTRL (0x3E20) -#define RTL838X_TRK_HASH_CTRL (0x3E24) - -#define RTL839X_TRK_MBR_CTR (0x2200) -#define RTL839X_TRK_HASH_IDX_CTRL (0x2280) -#define RTL839X_TRK_HASH_CTRL (0x2284) - -#define RTL930X_TRK_MBR_CTRL (0xA41C) -#define RTL930X_TRK_HASH_CTRL (0x9F80) - -#define RTL931X_TRK_MBR_CTRL (0xB8D0) -#define RTL931X_TRK_HASH_CTRL (0xBA70) - -/* Attack prevention */ -#define RTL838X_ATK_PRVNT_PORT_EN (0x5B00) -#define RTL838X_ATK_PRVNT_CTRL (0x5B04) -#define RTL838X_ATK_PRVNT_ACT (0x5B08) -#define RTL838X_ATK_PRVNT_STS (0x5B1C) - -/* 802.1X */ -#define RTL838X_RMA_BPDU_FLD_PMSK (0x4348) -#define RTL930X_RMA_BPDU_FLD_PMSK (0x9F18) -#define RTL931X_RMA_BPDU_FLD_PMSK (0x8950) -#define RTL839X_RMA_BPDU_FLD_PMSK (0x125C) - -#define RTL838X_SPCL_TRAP_CTRL (0x6980) -#define RTL838X_SPCL_TRAP_EAPOL_CTRL (0x6988) -#define RTL838X_SPCL_TRAP_ARP_CTRL (0x698C) -#define RTL838X_SPCL_TRAP_IGMP_CTRL (0x6984) -#define RTL838X_SPCL_TRAP_IPV6_CTRL (0x6994) -#define RTL838X_SPCL_TRAP_SWITCH_MAC_CTRL (0x6998) - -#define RTL839X_SPCL_TRAP_CTRL (0x1054) -#define RTL839X_SPCL_TRAP_EAPOL_CTRL (0x105C) -#define RTL839X_SPCL_TRAP_ARP_CTRL (0x1060) -#define RTL839X_SPCL_TRAP_IGMP_CTRL (0x1058) -#define RTL839X_SPCL_TRAP_IPV6_CTRL (0x1064) -#define RTL839X_SPCL_TRAP_SWITCH_MAC_CTRL (0x1068) -#define RTL839X_SPCL_TRAP_SWITCH_IPV4_ADDR_CTRL (0x106C) -#define RTL839X_SPCL_TRAP_CRC_CTRL (0x1070) -/* special port action controls */ -/* values: - * 0 = FORWARD (default) - * 1 = DROP - * 2 = TRAP2CPU - * 3 = FLOOD IN ALL PORT - * - * Register encoding. - * offset = CTRL + (port >> 4) << 2 - * value/mask = 3 << ((port & 0xF) << 1) - */ - -typedef enum { - BPDU = 0, - PTP, - PTP_UDP, - PTP_ETH2, - LLDP, - EAPOL, - GRATARP, -} rma_ctrl_t; - -typedef enum { - FORWARD = 0, - DROP, - TRAP2CPU, - FLOODALL, - TRAP2MASTERCPU, - COPY2CPU, -} action_type_t; - -#define RTL838X_RMA_BPDU_CTRL (0x4330) -#define RTL839X_RMA_BPDU_CTRL (0x122C) -#define RTL930X_RMA_BPDU_CTRL (0x9E7C) -#define RTL931X_RMA_BPDU_CTRL (0x881C) - -#define RTL838X_RMA_PTP_CTRL (0x4338) -#define RTL839X_RMA_PTP_CTRL (0x123C) -#define RTL930X_RMA_PTP_CTRL (0x9E88) -#define RTL931X_RMA_PTP_CTRL (0x8834) - -#define RTL838X_RMA_LLDP_CTRL (0x4340) -#define RTL839X_RMA_LLDP_CTRL (0x124C) -#define RTL930X_RMA_LLDP_CTRL (0x9EFC) -#define RTL931X_RMA_LLDP_CTRL (0x8918) - -#define RTL930X_RMA_EAPOL_CTRL (0x9F08) -#define RTL931X_RMA_EAPOL_CTRL (0x8930) -#define RTL931X_TRAP_ARP_GRAT_PORT_ACT (0x8C04) - -/* QoS */ -#define RTL838X_QM_INTPRI2QID_CTRL (0x5F00) -#define RTL839X_QM_INTPRI2QID_CTRL(q) (0x1110 + (q << 2)) -#define RTL839X_QM_PORT_QNUM(p) (0x1130 + (((p / 10) << 2))) -#define RTL838X_PRI_SEL_PORT_PRI(p) (0x5FB8 + (((p / 10) << 2))) -#define RTL839X_PRI_SEL_PORT_PRI(p) (0x10A8 + (((p / 10) << 2))) -#define RTL838X_QM_PKT2CPU_INTPRI_MAP (0x5F10) -#define RTL839X_QM_PKT2CPU_INTPRI_MAP (0x1154) -#define RTL838X_PRI_SEL_CTRL (0x10E0) -#define RTL839X_PRI_SEL_CTRL (0x10E0) -#define RTL838X_PRI_SEL_TBL_CTRL(i) (0x5FD8 + (((i) << 2))) -#define RTL839X_PRI_SEL_TBL_CTRL(i) (0x10D0 + (((i) << 2))) -#define RTL838X_QM_PKT2CPU_INTPRI_0 (0x5F04) -#define RTL838X_QM_PKT2CPU_INTPRI_1 (0x5F08) -#define RTL838X_QM_PKT2CPU_INTPRI_2 (0x5F0C) -#define RTL839X_OAM_CTRL (0x2100) -#define RTL839X_OAM_PORT_ACT_CTRL(p) (0x2104 + (((p) << 2))) -#define RTL839X_RMK_PORT_DEI_TAG_CTRL(p) (0x6A9C + (((p >> 5) << 2))) -#define RTL839X_PRI_SEL_IPRI_REMAP (0x1080) -#define RTL838X_PRI_SEL_IPRI_REMAP (0x5F8C) -#define RTL839X_PRI_SEL_DEI2DP_REMAP (0x10EC) -#define RTL839X_PRI_SEL_DSCP2DP_REMAP_ADDR(i) (0x10F0 + (((i >> 4) << 2))) -#define RTL839X_RMK_DEI_CTRL (0x6AA4) -#define RTL839X_WRED_PORT_THR_CTRL(i) (0x6084 + ((i) << 2)) -#define RTL839X_WRED_QUEUE_THR_CTRL(q, i) (0x6090 + ((q) * 12) + ((i) << 2)) -#define RTL838X_PRI_DSCP_INVLD_CTRL0 (0x5FE8) -#define RTL838X_RMK_IPRI_CTRL (0xA460) -#define RTL838X_RMK_OPRI_CTRL (0xA464) -#define RTL838X_SCHED_P_TYPE_CTRL(p) (0xC04C + (((p) << 7))) -#define RTL838X_SCHED_LB_CTRL(p) (0xC004 + (((p) << 7))) -#define RTL838X_FC_P_EGR_DROP_CTRL(p) (0x6B1C + (((p) << 2))) - -/* Debug features */ -#define RTL930X_STAT_PRVTE_DROP_COUNTER0 (0xB5B8) - -/* Packet Inspection Engine */ -#define RTL838X_METER_GLB_CTRL (0x4B08) -#define RTL839X_METER_GLB_CTRL (0x1300) -#define RTL930X_METER_GLB_CTRL (0xa0a0) -#define RTL931X_METER_GLB_CTRL (0x411C) - -#define RTL839X_ACL_CTRL (0x1288) - -#define RTL838X_ACL_BLK_LOOKUP_CTRL (0x6100) -#define RTL839X_ACL_BLK_LOOKUP_CTRL (0x1280) -#define RTL930X_PIE_BLK_LOOKUP_CTRL (0xa5a0) -#define RTL931X_PIE_BLK_LOOKUP_CTRL (0x4180) - -#define RTL838X_ACL_BLK_PWR_CTRL (0x6104) -#define RTL839X_PS_ACL_PWR_CTRL (0x049c) - -#define RTL838X_ACL_BLK_TMPLTE_CTRL(block) (0x6108 + ((block) << 2)) -#define RTL839X_ACL_BLK_TMPLTE_CTRL(block) (0x128c + ((block) << 2)) -#define RTL930X_PIE_BLK_TMPLTE_CTRL(block) (0xa624 + ((block) << 2)) -#define RTL931X_PIE_BLK_TMPLTE_CTRL(block) (0x4214 + ((block) << 2)) - -#define RTL838X_ACL_BLK_GROUP_CTRL (0x615C) -#define RTL839X_ACL_BLK_GROUP_CTRL (0x12ec) - -#define RTL838X_ACL_CLR_CTRL (0x6168) -#define RTL839X_ACL_CLR_CTRL (0x12fc) -#define RTL930X_PIE_CLR_CTRL (0xa66c) -#define RTL931X_PIE_CLR_CTRL (0x42D8) - -#define RTL838X_DMY_REG27 (0x3378) - -#define RTL838X_ACL_PORT_LOOKUP_CTRL(p) (0x616C + (((p) << 2))) -#define RTL930X_ACL_PORT_LOOKUP_CTRL(p) (0xA784 + (((p) << 2))) -#define RTL931X_ACL_PORT_LOOKUP_CTRL(p) (0x44F8 + (((p) << 2))) - -#define RTL930X_PIE_BLK_PHASE_CTRL (0xA5A4) -#define RTL931X_PIE_BLK_PHASE_CTRL (0x4184) - -/* PIE actions */ -#define PIE_ACT_COPY_TO_PORT 2 -#define PIE_ACT_REDIRECT_TO_PORT 4 -#define PIE_ACT_ROUTE_UC 6 -#define PIE_ACT_VID_ASSIGN 0 - -/* L3 actions */ -#define L3_FORWARD 0 -#define L3_DROP 1 -#define L3_TRAP2CPU 2 -#define L3_COPY2CPU 3 -#define L3_TRAP2MASTERCPU 4 -#define L3_COPY2MASTERCPU 5 -#define L3_HARDDROP 6 - -/* Route actions */ -#define ROUTE_ACT_FORWARD 0 -#define ROUTE_ACT_TRAP2CPU 1 -#define ROUTE_ACT_COPY2CPU 2 -#define ROUTE_ACT_DROP 3 - -/* L3 Routing */ -#define RTL839X_ROUTING_SA_CTRL 0x6afc -#define RTL930X_L3_HOST_TBL_CTRL (0xAB48) -#define RTL930X_L3_IPUC_ROUTE_CTRL (0xAB4C) -#define RTL930X_L3_IP6UC_ROUTE_CTRL (0xAB50) -#define RTL930X_L3_IPMC_ROUTE_CTRL (0xAB54) -#define RTL930X_L3_IP6MC_ROUTE_CTRL (0xAB58) -#define RTL930X_L3_IP_MTU_CTRL(i) (0xAB5C + ((i >> 1) << 2)) -#define RTL930X_L3_IP6_MTU_CTRL(i) (0xAB6C + ((i >> 1) << 2)) -#define RTL930X_L3_HW_LU_KEY_CTRL (0xAC9C) -#define RTL930X_L3_HW_LU_KEY_IP_CTRL (0xACA0) -#define RTL930X_L3_HW_LU_CTRL (0xACC0) -#define RTL930X_L3_IP_ROUTE_CTRL 0xab44 - -/* Port LED Control */ -#define RTL930X_LED_PORT_NUM_CTRL(p) (0xCC04 + (((p >> 4) << 2))) -#define RTL930X_LED_SET0_0_CTRL (0xCC28) -#define RTL930X_LED_PORT_COPR_SET_SEL_CTRL(p) (0xCC2C + (((p >> 4) << 2))) -#define RTL930X_LED_PORT_FIB_SET_SEL_CTRL(p) (0xCC34 + (((p >> 4) << 2))) -#define RTL930X_LED_PORT_COPR_MASK_CTRL (0xCC3C) -#define RTL930X_LED_PORT_FIB_MASK_CTRL (0xCC40) -#define RTL930X_LED_PORT_COMBO_MASK_CTRL (0xCC44) - -#define RTL931X_LED_PORT_NUM_CTRL(p) (0x0604 + (((p >> 4) << 2))) -#define RTL931X_LED_SET0_0_CTRL (0x0630) -#define RTL931X_LED_PORT_COPR_SET_SEL_CTRL(p) (0x0634 + (((p >> 4) << 2))) -#define RTL931X_LED_PORT_FIB_SET_SEL_CTRL(p) (0x0644 + (((p >> 4) << 2))) -#define RTL931X_LED_PORT_COPR_MASK_CTRL (0x0654) -#define RTL931X_LED_PORT_FIB_MASK_CTRL (0x065c) -#define RTL931X_LED_PORT_COMBO_MASK_CTRL (0x0664) - -#define MAX_VLANS 4096 -#define MAX_LAGS 16 -#define MAX_PRIOS 8 -#define RTL930X_PORT_IGNORE 0x3f -#define MAX_MC_GROUPS 512 -#define UNKNOWN_MC_PMASK (MAX_MC_GROUPS - 1) -#define PIE_BLOCK_SIZE 128 -#define MAX_PIE_ENTRIES (18 * PIE_BLOCK_SIZE) -#define N_FIXED_FIELDS 12 -#define N_FIXED_FIELDS_RTL931X 14 -#define MAX_COUNTERS 2048 -#define MAX_ROUTES 512 -#define MAX_HOST_ROUTES 1536 -#define MAX_INTF_MTUS 8 -#define DEFAULT_MTU 1536 -#define MAX_INTERFACES 100 -#define MAX_ROUTER_MACS 64 -#define L3_EGRESS_DMACS 2048 -#define MAX_SMACS 64 - -enum phy_type { - PHY_NONE = 0, - PHY_RTL838X_SDS = 1, - PHY_RTL8218B_INT = 2, - PHY_RTL8218B_EXT = 3, - PHY_RTL8214FC = 4, - PHY_RTL839X_SDS = 5, - PHY_RTL930X_SDS = 6, -}; - -enum pbvlan_type { - PBVLAN_TYPE_INNER = 0, - PBVLAN_TYPE_OUTER, -}; - -enum pbvlan_mode { - PBVLAN_MODE_UNTAG_AND_PRITAG = 0, - PBVLAN_MODE_UNTAG_ONLY, - PBVLAN_MODE_ALL_PKT, -}; - -struct rtl838x_port { - bool enable; - u64 pm; - u16 pvid; - bool eee_enabled; - enum phy_type phy; - bool phy_is_integrated; - bool is10G; - bool is2G5; - int sds_num; - int led_set; - int leds_on_this_port; - const struct dsa_port *dp; -}; - -struct rtl838x_vlan_info { - u64 untagged_ports; - u64 tagged_ports; - u8 profile_id; - bool hash_mc_fid; - bool hash_uc_fid; - u8 fid; /* AKA MSTI */ - - /* The following fields are used only by the RTL931X */ - int if_id; /* Interface (index in L3_EGR_INTF_IDX) */ - u16 multicast_grp_mask; - int l2_tunnel_list_id; -}; - -enum l2_entry_type { - L2_INVALID = 0, - L2_UNICAST = 1, - L2_MULTICAST = 2, - IP4_MULTICAST = 3, - IP6_MULTICAST = 4, -}; - -struct rtl838x_l2_entry { - u8 mac[6]; - u16 vid; - u16 rvid; - u8 port; - bool valid; - enum l2_entry_type type; - bool is_static; - bool is_ip_mc; - bool is_ipv6_mc; - bool block_da; - bool block_sa; - bool suspended; - bool next_hop; - int age; - u8 trunk; - bool is_trunk; - u8 stack_dev; - u16 mc_portmask_index; - u32 mc_gip; - u32 mc_sip; - u16 mc_mac_index; - u16 nh_route_id; - bool nh_vlan_target; /* Only RTL83xx: VLAN used for next hop */ - - /* The following is only valid on RTL931x */ - bool is_open_flow; - bool is_pe_forward; - bool is_local_forward; - bool is_remote_forward; - bool is_l2_tunnel; - int l2_tunnel_id; - int l2_tunnel_list_id; -}; - -enum fwd_rule_action { - FWD_RULE_ACTION_NONE = 0, - FWD_RULE_ACTION_FWD = 1, -}; - -enum pie_phase { - PHASE_VACL = 0, - PHASE_IACL = 1, -}; - -enum igr_filter { - IGR_FORWARD = 0, - IGR_DROP = 1, - IGR_TRAP = 2, -}; - -enum egr_filter { - EGR_DISABLE = 0, - EGR_ENABLE = 1, -}; - -/* Intermediate representation of a Packet Inspection Engine Rule - * as suggested by the Kernel's tc flower offload subsystem - * Field meaning is universal across SoC families, but data content is specific - * to SoC family (e.g. because of different port ranges) */ -struct pie_rule { - int id; - enum pie_phase phase; /* Phase in which this template is applied */ - int packet_cntr; /* ID of a packet counter assigned to this rule */ - int octet_cntr; /* ID of a byte counter assigned to this rule */ - u32 last_packet_cnt; - u64 last_octet_cnt; - - /* The following are requirements for the pie template */ - bool is_egress; - bool is_ipv6; /* This is a rule with IPv6 fields */ - - /* Fixed fields that are always matched against on RTL8380 */ - u8 spmmask_fix; - u8 spn; /* Source port number */ - bool stacking_port; /* Source port is stacking port */ - bool mgnt_vlan; /* Packet arrived on management VLAN */ - bool dmac_hit_sw; /* The packet's destination MAC matches one of the device's */ - bool content_too_deep; /* The content of the packet cannot be parsed: too many layers */ - bool not_first_frag; /* Not the first IP fragment */ - u8 frame_type_l4; /* 0: UDP, 1: TCP, 2: ICMP/ICMPv6, 3: IGMP */ - u8 frame_type; /* 0: ARP, 1: L2 only, 2: IPv4, 3: IPv6 */ - bool otag_fmt; /* 0: outer tag packet, 1: outer priority tag or untagged */ - bool itag_fmt; /* 0: inner tag packet, 1: inner priority tag or untagged */ - bool otag_exist; /* packet with outer tag */ - bool itag_exist; /* packet with inner tag */ - bool frame_type_l2; /* 0: Ethernet, 1: LLC_SNAP, 2: LLC_Other, 3: Reserved */ - bool igr_normal_port; /* Ingress port is not cpu or stacking port */ - u8 tid; /* The template ID defining the what the templated fields mean */ - - /* Masks for the fields that are always matched against on RTL8380 */ - u8 spmmask_fix_m; - u8 spn_m; - bool stacking_port_m; - bool mgnt_vlan_m; - bool dmac_hit_sw_m; - bool content_too_deep_m; - bool not_first_frag_m; - u8 frame_type_l4_m; - u8 frame_type_m; - bool otag_fmt_m; - bool itag_fmt_m; - bool otag_exist_m; - bool itag_exist_m; - bool frame_type_l2_m; - bool igr_normal_port_m; - u8 tid_m; - - /* Logical operations between rules, special rules for rule numbers apply */ - bool valid; - bool cond_not; /* Matches when conditions not match */ - bool cond_and1; /* And this rule 2n with the next rule 2n+1 in same block */ - bool cond_and2; /* And this rule m in block 2n with rule m in block 2n+1 */ - bool ivalid; - - /* Actions to be performed */ - bool drop; /* Drop the packet */ - bool fwd_sel; /* Forward packet: to port, portmask, dest route, next rule, drop */ - bool ovid_sel; /* So something to outer vlan-id: shift, re-assign */ - bool ivid_sel; /* Do something to inner vlan-id: shift, re-assign */ - bool flt_sel; /* Filter the packet when sending to certain ports */ - bool log_sel; /* Log the packet in one of the LOG-table counters */ - bool rmk_sel; /* Re-mark the packet, i.e. change the priority-tag */ - bool meter_sel; /* Meter the packet, i.e. limit rate of this type of packet */ - bool tagst_sel; /* Change the ergress tag */ - bool mir_sel; /* Mirror the packet to a Link Aggregation Group */ - bool nopri_sel; /* Change the normal priority */ - bool cpupri_sel; /* Change the CPU priority */ - bool otpid_sel; /* Change Outer Tag Protocol Identifier (802.1q) */ - bool itpid_sel; /* Change Inner Tag Protocol Identifier (802.1q) */ - bool shaper_sel; /* Apply traffic shaper */ - bool mpls_sel; /* MPLS actions */ - bool bypass_sel; /* Bypass actions */ - bool fwd_sa_lrn; /* Learn the source address when forwarding */ - bool fwd_mod_to_cpu; /* Forward the modified VLAN tag format to CPU-port */ - - /* Fields used in predefined templates 0-2 on RTL8380 / 90 / 9300 */ - u64 spm; /* Source Port Matrix */ - u16 otag; /* Outer VLAN-ID */ - u8 smac[ETH_ALEN]; /* Source MAC address */ - u8 dmac[ETH_ALEN]; /* Destination MAC address */ - u16 ethertype; /* Ethernet frame type field in ethernet header */ - u16 itag; /* Inner VLAN-ID */ - u16 field_range_check; - u32 sip; /* Source IP */ - struct in6_addr sip6; /* IPv6 Source IP */ - u32 dip; /* Destination IP */ - struct in6_addr dip6; /* IPv6 Destination IP */ - u16 tos_proto; /* IPv4: TOS + Protocol fields, IPv6: Traffic class + next header */ - u16 sport; /* TCP/UDP source port */ - u16 dport; /* TCP/UDP destination port */ - u16 icmp_igmp; - u16 tcp_info; - u16 dsap_ssap; /* Destination / Source Service Access Point bytes (802.3) */ - - u64 spm_m; - u16 otag_m; - u8 smac_m[ETH_ALEN]; - u8 dmac_m[ETH_ALEN]; - u8 ethertype_m; - u16 itag_m; - u16 field_range_check_m; - u32 sip_m; - struct in6_addr sip6_m; /* IPv6 Source IP mask */ - u32 dip_m; - struct in6_addr dip6_m; /* IPv6 Destination IP mask */ - u16 tos_proto_m; - u16 sport_m; - u16 dport_m; - u16 icmp_igmp_m; - u16 tcp_info_m; - u16 dsap_ssap_m; - - /* Data associated with actions */ - u8 fwd_act; /* Type of forwarding action */ - /* 0: permit, 1: drop, 2: copy to port id, 4: copy to portmask */ - /* 4: redirect to portid, 5: redirect to portmask */ - /* 6: route, 7: vlan leaky (only 8380) */ - u16 fwd_data; /* Additional data for forwarding action, e.g. destination port */ - u8 ovid_act; - u16 ovid_data; /* Outer VLAN ID */ - u8 ivid_act; - u16 ivid_data; /* Inner VLAN ID */ - u16 flt_data; /* Filtering data */ - u16 log_data; /* ID of packet or octet counter in LOG table, on RTL93xx */ - /* unnecessary since PIE-Rule-ID == LOG-counter-ID */ - bool log_octets; - u8 mpls_act; /* MPLS action type */ - u16 mpls_lib_idx; /* MPLS action data */ - - u16 rmk_data; /* Data for remarking */ - u16 meter_data; /* ID of meter for bandwidth control */ - u16 tagst_data; - u16 mir_data; - u16 nopri_data; - u16 cpupri_data; - u16 otpid_data; - u16 itpid_data; - u16 shaper_data; - - /* Bypass actions, ignored on RTL8380 */ - bool bypass_all; /* Not clear */ - bool bypass_igr_stp; /* Bypass Ingress STP state */ - bool bypass_ibc_sc; /* Bypass Ingress Bandwidth Control and Storm Control */ -}; - -struct rtl838x_l3_intf { - u16 vid; - u8 smac_idx; - u8 ip4_mtu_id; - u8 ip6_mtu_id; - u16 ip4_mtu; - u16 ip6_mtu; - u8 ttl_scope; - u8 hl_scope; - u8 ip4_icmp_redirect; - u8 ip6_icmp_redirect; - u8 ip4_pbr_icmp_redirect; - u8 ip6_pbr_icmp_redirect; -}; - -/* An entry in the RTL93XX SoC's ROUTER_MAC tables setting up a termination point - * for the L3 routing system. Packets arriving and matching an entry in this table - * will be considered for routing. - * Mask fields state whether the corresponding data fields matter for matching - */ -struct rtl93xx_rt_mac { - bool valid; /* Valid or not */ - bool p_type; /* Individual (0) or trunk (1) port */ - bool p_mask; /* Whether the port type is used */ - u8 p_id; - u8 p_id_mask; /* Mask for the port */ - u8 action; /* Routing action performed: 0: FORWARD, 1: DROP, 2: TRAP2CPU */ - /* 3: COPY2CPU, 4: TRAP2MASTERCPU, 5: COPY2MASTERCPU, 6: HARDDROP */ - u16 vid; - u16 vid_mask; - u64 mac; /* MAC address used as source MAC in the routed packet */ - u64 mac_mask; -}; - -struct rtl83xx_nexthop { - u16 id; /* ID: L3_NEXT_HOP table-index or route-index set in L2_NEXT_HOP */ - u32 dev_id; - u16 port; - u16 vid; /* VLAN-ID for L2 table entry (saved from L2-UC entry) */ - u16 rvid; /* Relay VID/FID for the L2 table entry */ - u64 mac; /* The MAC address of the entry in the L2_NEXT_HOP table */ - u16 mac_id; - u16 l2_id; /* Index of this next hop forwarding entry in L2 FIB table */ - u64 gw; /* The gateway MAC address packets are forwarded to */ - int if_id; /* Interface (into L3_EGR_INTF_IDX) */ -}; - -struct rtl838x_switch_priv; - -struct rtl83xx_flow { - unsigned long cookie; - struct rhash_head node; - struct rcu_head rcu_head; - struct rtl838x_switch_priv *priv; - struct pie_rule rule; - u32 flags; -}; - -struct rtl93xx_route_attr { - bool valid; - bool hit; - bool ttl_dec; - bool ttl_check; - bool dst_null; - bool qos_as; - u8 qos_prio; - u8 type; - u8 action; -}; - -struct rtl83xx_route { - u32 gw_ip; /* IP of the route's gateway */ - u32 dst_ip; /* IP of the destination net */ - struct in6_addr dst_ip6; - int prefix_len; /* Network prefix len of the destination net */ - bool is_host_route; - int id; /* ID number of this route */ - struct rhlist_head linkage; - u16 switch_mac_id; /* Index into switch's own MACs, RTL839X only */ - struct rtl83xx_nexthop nh; - struct pie_rule pr; - struct rtl93xx_route_attr attr; -}; - -struct rtl838x_reg { - void (*mask_port_reg_be)(u64 clear, u64 set, int reg); - void (*set_port_reg_be)(u64 set, int reg); - u64 (*get_port_reg_be)(int reg); - void (*mask_port_reg_le)(u64 clear, u64 set, int reg); - void (*set_port_reg_le)(u64 set, int reg); - u64 (*get_port_reg_le)(int reg); - int stat_port_rst; - int stat_rst; - int stat_port_std_mib; - int (*port_iso_ctrl)(int p); - void (*traffic_enable)(int source, int dest); - void (*traffic_disable)(int source, int dest); - void (*traffic_set)(int source, u64 dest_matrix); - u64 (*traffic_get)(int source); - int l2_ctrl_0; - int l2_ctrl_1; - int smi_poll_ctrl; - u32 l2_port_aging_out; - int l2_tbl_flush_ctrl; - void (*exec_tbl0_cmd)(u32 cmd); - void (*exec_tbl1_cmd)(u32 cmd); - int (*tbl_access_data_0)(int i); - int isr_glb_src; - int isr_port_link_sts_chg; - int imr_port_link_sts_chg; - int imr_glb; - void (*vlan_tables_read)(u32 vlan, struct rtl838x_vlan_info *info); - void (*vlan_set_tagged)(u32 vlan, struct rtl838x_vlan_info *info); - void (*vlan_set_untagged)(u32 vlan, u64 portmask); - void (*vlan_profile_dump)(int index); - void (*vlan_profile_setup)(int profile); - void (*vlan_port_pvidmode_set)(int port, enum pbvlan_type type, enum pbvlan_mode mode); - void (*vlan_port_pvid_set)(int port, enum pbvlan_type type, int pvid); - void (*vlan_port_keep_tag_set)(int port, bool keep_outer, bool keep_inner); - void (*set_vlan_igr_filter)(int port, enum igr_filter state); - void (*set_vlan_egr_filter)(int port, enum egr_filter state); - void (*enable_learning)(int port, bool enable); - void (*enable_flood)(int port, bool enable); - void (*enable_mcast_flood)(int port, bool enable); - void (*enable_bcast_flood)(int port, bool enable); - void (*set_static_move_action)(int port, bool forward); - void (*stp_get)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]); - void (*stp_set)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]); - int (*mac_force_mode_ctrl)(int port); - int (*mac_port_ctrl)(int port); - int (*l2_port_new_salrn)(int port); - int (*l2_port_new_sa_fwd)(int port); - int (*set_ageing_time)(unsigned long msec); - int mir_ctrl; - int mir_dpm; - int mir_spm; - int mac_link_sts; - int mac_link_dup_sts; - int (*mac_link_spd_sts)(int port); - int mac_rx_pause_sts; - int mac_tx_pause_sts; - u64 (*read_l2_entry_using_hash)(u32 hash, u32 position, struct rtl838x_l2_entry *e); - void (*write_l2_entry_using_hash)(u32 hash, u32 pos, struct rtl838x_l2_entry *e); - u64 (*read_cam)(int idx, struct rtl838x_l2_entry *e); - void (*write_cam)(int idx, struct rtl838x_l2_entry *e); - int (*trk_mbr_ctr)(int group); - int rma_bpdu_fld_pmask; - int spcl_trap_eapol_ctrl; - void (*init_eee)(struct rtl838x_switch_priv *priv, bool enable); - void (*port_eee_set)(struct rtl838x_switch_priv *priv, int port, bool enable); - int (*eee_port_ability)(struct rtl838x_switch_priv *priv, - struct ethtool_eee *e, int port); - u64 (*l2_hash_seed)(u64 mac, u32 vid); - u32 (*l2_hash_key)(struct rtl838x_switch_priv *priv, u64 seed); - u64 (*read_mcast_pmask)(int idx); - void (*write_mcast_pmask)(int idx, u64 portmask); - void (*vlan_fwd_on_inner)(int port, bool is_set); - void (*pie_init)(struct rtl838x_switch_priv *priv); - int (*pie_rule_read)(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr); - int (*pie_rule_write)(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr); - int (*pie_rule_add)(struct rtl838x_switch_priv *priv, struct pie_rule *rule); - void (*pie_rule_rm)(struct rtl838x_switch_priv *priv, struct pie_rule *rule); - void (*l2_learning_setup)(void); - u32 (*packet_cntr_read)(int counter); - void (*packet_cntr_clear)(int counter); - void (*route_read)(int idx, struct rtl83xx_route *rt); - void (*route_write)(int idx, struct rtl83xx_route *rt); - void (*host_route_write)(int idx, struct rtl83xx_route *rt); - int (*l3_setup)(struct rtl838x_switch_priv *priv); - void (*set_l3_nexthop)(int idx, u16 dmac_id, u16 interface); - void (*get_l3_nexthop)(int idx, u16 *dmac_id, u16 *interface); - u64 (*get_l3_egress_mac)(u32 idx); - void (*set_l3_egress_mac)(u32 idx, u64 mac); - int (*find_l3_slot)(struct rtl83xx_route *rt, bool must_exist); - int (*route_lookup_hw)(struct rtl83xx_route *rt); - void (*get_l3_router_mac)(u32 idx, struct rtl93xx_rt_mac *m); - void (*set_l3_router_mac)(u32 idx, struct rtl93xx_rt_mac *m); - void (*set_l3_egress_intf)(int idx, struct rtl838x_l3_intf *intf); - void (*set_distribution_algorithm)(int group, int algoidx, u32 algomask); - void (*set_receive_management_action)(int port, rma_ctrl_t type, action_type_t action); - void (*led_init)(struct rtl838x_switch_priv *priv); -}; - -struct rtl838x_switch_priv { - /* Switch operation */ - struct dsa_switch *ds; - struct device *dev; - u16 id; - u16 family_id; - char version; - struct rtl838x_port ports[57]; - struct mutex reg_mutex; /* Mutex for individual register manipulations */ - struct mutex pie_mutex; /* Mutex for Packet Inspection Engine */ - int link_state_irq; - int mirror_group_ports[4]; - struct mii_bus *mii_bus; - const struct rtl838x_reg *r; - u8 cpu_port; - u8 port_mask; - u8 port_width; - u8 port_ignore; - u64 irq_mask; - u32 fib_entries; - int l2_bucket_size; - struct dentry *dbgfs_dir; - int n_lags; - u64 lags_port_members[MAX_LAGS]; - struct net_device *lag_devs[MAX_LAGS]; - u32 lag_primary[MAX_LAGS]; - u32 is_lagmember[57]; - u64 lagmembers; - struct notifier_block nb; /* TODO: change to different name */ - struct notifier_block ne_nb; - struct notifier_block fib_nb; - bool eee_enabled; - unsigned long int mc_group_bm[MAX_MC_GROUPS >> 5]; - int n_pie_blocks; - struct rhashtable tc_ht; - unsigned long int pie_use_bm[MAX_PIE_ENTRIES >> 5]; - int n_counters; - unsigned long int octet_cntr_use_bm[MAX_COUNTERS >> 5]; - unsigned long int packet_cntr_use_bm[MAX_COUNTERS >> 4]; - struct rhltable routes; - unsigned long int route_use_bm[MAX_ROUTES >> 5]; - unsigned long int host_route_use_bm[MAX_HOST_ROUTES >> 5]; - struct rtl838x_l3_intf *interfaces[MAX_INTERFACES]; - u16 intf_mtus[MAX_INTF_MTUS]; - int intf_mtu_count[MAX_INTF_MTUS]; -}; - -void rtl838x_dbgfs_init(struct rtl838x_switch_priv *priv); -void rtl930x_dbgfs_init(struct rtl838x_switch_priv *priv); - -#endif /* _RTL838X_H */ diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c deleted file mode 100644 index 5889cea6d6..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c +++ /dev/null @@ -1,1911 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include - -#include "rtl83xx.h" - -#define RTL839X_VLAN_PORT_TAG_STS_UNTAG 0x0 -#define RTL839X_VLAN_PORT_TAG_STS_TAGGED 0x1 -#define RTL839X_VLAN_PORT_TAG_STS_PRIORITY_TAGGED 0x2 - -#define RTL839X_VLAN_PORT_TAG_STS_CTRL_BASE 0x6828 -/* port 0-52 */ -#define RTL839X_VLAN_PORT_TAG_STS_CTRL(port) \ - RTL839X_VLAN_PORT_TAG_STS_CTRL_BASE + (port << 2) -#define RTL839X_VLAN_PORT_TAG_STS_CTRL_OTAG_STS_MASK GENMASK(7,6) -#define RTL839X_VLAN_PORT_TAG_STS_CTRL_ITAG_STS_MASK GENMASK(5,4) -#define RTL839X_VLAN_PORT_TAG_STS_CTRL_EGR_P_OTAG_KEEP_MASK GENMASK(3,3) -#define RTL839X_VLAN_PORT_TAG_STS_CTRL_EGR_P_ITAG_KEEP_MASK GENMASK(2,2) -#define RTL839X_VLAN_PORT_TAG_STS_CTRL_IGR_P_OTAG_KEEP_MASK GENMASK(1,1) -#define RTL839X_VLAN_PORT_TAG_STS_CTRL_IGR_P_ITAG_KEEP_MASK GENMASK(0,0) - -extern struct mutex smi_lock; -extern struct rtl83xx_soc_info soc_info; - -/* Definition of the RTL839X-specific template field IDs as used in the PIE */ -enum template_field_id { - TEMPLATE_FIELD_SPMMASK = 0, - TEMPLATE_FIELD_SPM0 = 1, /* Source portmask ports 0-15 */ - TEMPLATE_FIELD_SPM1 = 2, /* Source portmask ports 16-31 */ - TEMPLATE_FIELD_SPM2 = 3, /* Source portmask ports 32-47 */ - TEMPLATE_FIELD_SPM3 = 4, /* Source portmask ports 48-56 */ - TEMPLATE_FIELD_DMAC0 = 5, /* Destination MAC [15:0] */ - TEMPLATE_FIELD_DMAC1 = 6, /* Destination MAC [31:16] */ - TEMPLATE_FIELD_DMAC2 = 7, /* Destination MAC [47:32] */ - TEMPLATE_FIELD_SMAC0 = 8, /* Source MAC [15:0] */ - TEMPLATE_FIELD_SMAC1 = 9, /* Source MAC [31:16] */ - TEMPLATE_FIELD_SMAC2 = 10, /* Source MAC [47:32] */ - TEMPLATE_FIELD_ETHERTYPE = 11, /* Ethernet frame type field */ - /* Field-ID 12 is not used */ - TEMPLATE_FIELD_OTAG = 13, - TEMPLATE_FIELD_ITAG = 14, - TEMPLATE_FIELD_SIP0 = 15, - TEMPLATE_FIELD_SIP1 = 16, - TEMPLATE_FIELD_DIP0 = 17, - TEMPLATE_FIELD_DIP1 = 18, - TEMPLATE_FIELD_IP_TOS_PROTO = 19, - TEMPLATE_FIELD_IP_FLAG = 20, - TEMPLATE_FIELD_L4_SPORT = 21, - TEMPLATE_FIELD_L4_DPORT = 22, - TEMPLATE_FIELD_L34_HEADER = 23, - TEMPLATE_FIELD_ICMP_IGMP = 24, - TEMPLATE_FIELD_VID_RANG0 = 25, - TEMPLATE_FIELD_VID_RANG1 = 26, - TEMPLATE_FIELD_L4_PORT_RANG = 27, - TEMPLATE_FIELD_FIELD_SELECTOR_VALID = 28, - TEMPLATE_FIELD_FIELD_SELECTOR_0 = 29, - TEMPLATE_FIELD_FIELD_SELECTOR_1 = 30, - TEMPLATE_FIELD_FIELD_SELECTOR_2 = 31, - TEMPLATE_FIELD_FIELD_SELECTOR_3 = 32, - TEMPLATE_FIELD_FIELD_SELECTOR_4 = 33, - TEMPLATE_FIELD_FIELD_SELECTOR_5 = 34, - TEMPLATE_FIELD_SIP2 = 35, - TEMPLATE_FIELD_SIP3 = 36, - TEMPLATE_FIELD_SIP4 = 37, - TEMPLATE_FIELD_SIP5 = 38, - TEMPLATE_FIELD_SIP6 = 39, - TEMPLATE_FIELD_SIP7 = 40, - TEMPLATE_FIELD_OLABEL = 41, - TEMPLATE_FIELD_ILABEL = 42, - TEMPLATE_FIELD_OILABEL = 43, - TEMPLATE_FIELD_DPMMASK = 44, - TEMPLATE_FIELD_DPM0 = 45, - TEMPLATE_FIELD_DPM1 = 46, - TEMPLATE_FIELD_DPM2 = 47, - TEMPLATE_FIELD_DPM3 = 48, - TEMPLATE_FIELD_L2DPM0 = 49, - TEMPLATE_FIELD_L2DPM1 = 50, - TEMPLATE_FIELD_L2DPM2 = 51, - TEMPLATE_FIELD_L2DPM3 = 52, - TEMPLATE_FIELD_IVLAN = 53, - TEMPLATE_FIELD_OVLAN = 54, - TEMPLATE_FIELD_FWD_VID = 55, - TEMPLATE_FIELD_DIP2 = 56, - TEMPLATE_FIELD_DIP3 = 57, - TEMPLATE_FIELD_DIP4 = 58, - TEMPLATE_FIELD_DIP5 = 59, - TEMPLATE_FIELD_DIP6 = 60, - TEMPLATE_FIELD_DIP7 = 61, -}; - -/* Number of fixed templates predefined in the SoC */ -#define N_FIXED_TEMPLATES 5 -static enum template_field_id fixed_templates[N_FIXED_TEMPLATES][N_FIXED_FIELDS] = -{ - { - TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_ITAG, - TEMPLATE_FIELD_SMAC0, TEMPLATE_FIELD_SMAC1, TEMPLATE_FIELD_SMAC2, - TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2, - TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3 - }, { - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, - TEMPLATE_FIELD_DIP1,TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_L4_SPORT, - TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_ICMP_IGMP, TEMPLATE_FIELD_SPM0, - TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3 - }, { - TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2, - TEMPLATE_FIELD_ITAG, TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_IP_TOS_PROTO, - TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_SIP0, - TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1 - }, { - TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_DIP2, - TEMPLATE_FIELD_DIP3, TEMPLATE_FIELD_DIP4, TEMPLATE_FIELD_DIP5, - TEMPLATE_FIELD_DIP6, TEMPLATE_FIELD_DIP7, TEMPLATE_FIELD_L4_DPORT, - TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_ICMP_IGMP, TEMPLATE_FIELD_IP_TOS_PROTO - }, { - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_SIP2, - TEMPLATE_FIELD_SIP3, TEMPLATE_FIELD_SIP4, TEMPLATE_FIELD_SIP5, - TEMPLATE_FIELD_SIP6, TEMPLATE_FIELD_SIP7, TEMPLATE_FIELD_SPM0, - TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3 - }, -}; - -void rtl839x_print_matrix(void) -{ - volatile u64 *ptr9; - - ptr9 = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0); - for (int i = 0; i < 52; i += 4) - pr_debug("> %16llx %16llx %16llx %16llx\n", - ptr9[i + 0], ptr9[i + 1], ptr9[i + 2], ptr9[i + 3]); - pr_debug("CPU_PORT> %16llx\n", ptr9[52]); -} - -static inline int rtl839x_port_iso_ctrl(int p) -{ - return RTL839X_PORT_ISO_CTRL(p); -} - -static inline void rtl839x_exec_tbl0_cmd(u32 cmd) -{ - sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_0); - do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_0) & BIT(16)); -} - -static inline void rtl839x_exec_tbl1_cmd(u32 cmd) -{ - sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_1); - do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_1) & BIT(16)); -} - -inline void rtl839x_exec_tbl2_cmd(u32 cmd) -{ - sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_2); - do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_2) & (1 << 9)); -} - -static inline int rtl839x_tbl_access_data_0(int i) -{ - return RTL839X_TBL_ACCESS_DATA_0(i); -} - -static void rtl839x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 u, v, w; - /* Read VLAN table (0) via register 0 */ - struct table_reg *r = rtl_table_get(RTL8390_TBL_0, 0); - - rtl_table_read(r, vlan); - u = sw_r32(rtl_table_data(r, 0)); - v = sw_r32(rtl_table_data(r, 1)); - w = sw_r32(rtl_table_data(r, 2)); - rtl_table_release(r); - - info->tagged_ports = u; - info->tagged_ports = (info->tagged_ports << 21) | ((v >> 11) & 0x1fffff); - info->profile_id = w >> 30 | ((v & 1) << 2); - info->hash_mc_fid = !!(w & BIT(2)); - info->hash_uc_fid = !!(w & BIT(3)); - info->fid = (v >> 3) & 0xff; - - /* Read UNTAG table (0) via table register 1 */ - r = rtl_table_get(RTL8390_TBL_1, 0); - rtl_table_read(r, vlan); - u = sw_r32(rtl_table_data(r, 0)); - v = sw_r32(rtl_table_data(r, 1)); - rtl_table_release(r); - - info->untagged_ports = u; - info->untagged_ports = (info->untagged_ports << 21) | ((v >> 11) & 0x1fffff); -} - -static void rtl839x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 u, v, w; - /* Access VLAN table (0) via register 0 */ - struct table_reg *r = rtl_table_get(RTL8390_TBL_0, 0); - - u = info->tagged_ports >> 21; - v = info->tagged_ports << 11; - v |= ((u32)info->fid) << 3; - v |= info->hash_uc_fid ? BIT(2) : 0; - v |= info->hash_mc_fid ? BIT(1) : 0; - v |= (info->profile_id & 0x4) ? 1 : 0; - w = ((u32)(info->profile_id & 3)) << 30; - - sw_w32(u, rtl_table_data(r, 0)); - sw_w32(v, rtl_table_data(r, 1)); - sw_w32(w, rtl_table_data(r, 2)); - - rtl_table_write(r, vlan); - rtl_table_release(r); -} - -static void rtl839x_vlan_set_untagged(u32 vlan, u64 portmask) -{ - u32 u, v; - - /* Access UNTAG table (0) via table register 1 */ - struct table_reg *r = rtl_table_get(RTL8390_TBL_1, 0); - - u = portmask >> 21; - v = portmask << 11; - - sw_w32(u, rtl_table_data(r, 0)); - sw_w32(v, rtl_table_data(r, 1)); - rtl_table_write(r, vlan); - - rtl_table_release(r); -} - -/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer */ -static void rtl839x_vlan_fwd_on_inner(int port, bool is_set) -{ - if (is_set) - rtl839x_mask_port_reg_be(BIT_ULL(port), 0ULL, RTL839X_VLAN_PORT_FWD); - else - rtl839x_mask_port_reg_be(0ULL, BIT_ULL(port), RTL839X_VLAN_PORT_FWD); -} - -/* Hash seed is vid (actually rvid) concatenated with the MAC address */ -static u64 rtl839x_l2_hash_seed(u64 mac, u32 vid) -{ - u64 v = vid; - - v <<= 48; - v |= mac; - - return v; -} - -/* Applies the same hash algorithm as the one used currently by the ASIC to the seed - * and returns a key into the L2 hash table - */ -static u32 rtl839x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) -{ - u32 h1, h2, h; - - if (sw_r32(priv->r->l2_ctrl_0) & 1) { - h1 = (u32) (((seed >> 60) & 0x3f) ^ ((seed >> 54) & 0x3f) ^ - ((seed >> 36) & 0x3f) ^ ((seed >> 30) & 0x3f) ^ - ((seed >> 12) & 0x3f) ^ ((seed >> 6) & 0x3f)); - h2 = (u32) (((seed >> 48) & 0x3f) ^ ((seed >> 42) & 0x3f) ^ - ((seed >> 24) & 0x3f) ^ ((seed >> 18) & 0x3f) ^ - (seed & 0x3f)); - h = (h1 << 6) | h2; - } else { - h = (seed >> 60) ^ - ((((seed >> 48) & 0x3f) << 6) | ((seed >> 54) & 0x3f)) ^ - ((seed >> 36) & 0xfff) ^ ((seed >> 24) & 0xfff) ^ - ((seed >> 12) & 0xfff) ^ (seed & 0xfff); - } - - return h; -} - -static inline int rtl839x_mac_force_mode_ctrl(int p) -{ - return RTL839X_MAC_FORCE_MODE_CTRL + (p << 2); -} - -static inline int rtl839x_mac_port_ctrl(int p) -{ - return RTL839X_MAC_PORT_CTRL(p); -} - -static inline int rtl839x_l2_port_new_salrn(int p) -{ - return RTL839X_L2_PORT_NEW_SALRN(p); -} - -static inline int rtl839x_l2_port_new_sa_fwd(int p) -{ - return RTL839X_L2_PORT_NEW_SA_FWD(p); -} - -static inline int rtl839x_mac_link_spd_sts(int p) -{ - return RTL839X_MAC_LINK_SPD_STS(p); -} - -static inline int rtl839x_trk_mbr_ctr(int group) -{ - return RTL839X_TRK_MBR_CTR + (group << 3); -} - -static void rtl839x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) -{ - /* Table contains different entry types, we need to identify the right one: - * Check for MC entries, first - */ - e->is_ip_mc = !!(r[2] & BIT(31)); - e->is_ipv6_mc = !!(r[2] & BIT(30)); - e->type = L2_INVALID; - if (!e->is_ip_mc && !e->is_ipv6_mc) { - e->mac[0] = (r[0] >> 12); - e->mac[1] = (r[0] >> 4); - e->mac[2] = ((r[1] >> 28) | (r[0] << 4)); - e->mac[3] = (r[1] >> 20); - e->mac[4] = (r[1] >> 12); - e->mac[5] = (r[1] >> 4); - - e->vid = (r[2] >> 4) & 0xfff; - e->rvid = (r[0] >> 20) & 0xfff; - - /* Is it a unicast entry? check multicast bit */ - if (!(e->mac[0] & 1)) { - e->is_static = !!((r[2] >> 18) & 1); - e->port = (r[2] >> 24) & 0x3f; - e->block_da = !!(r[2] & (1 << 19)); - e->block_sa = !!(r[2] & (1 << 20)); - e->suspended = !!(r[2] & (1 << 17)); - e->next_hop = !!(r[2] & (1 << 16)); - if (e->next_hop) { - pr_debug("Found next hop entry, need to read data\n"); - e->nh_vlan_target = !!(r[2] & BIT(15)); - e->nh_route_id = (r[2] >> 4) & 0x1ff; - e->vid = e->rvid; - } - e->age = (r[2] >> 21) & 3; - e->valid = true; - if (!(r[2] & 0xc0fd0000)) /* Check for valid entry */ - e->valid = false; - else - e->type = L2_UNICAST; - } else { - e->valid = true; - e->type = L2_MULTICAST; - e->mc_portmask_index = (r[2] >> 6) & 0xfff; - e->vid = e->rvid; - } - } else { /* IPv4 and IPv6 multicast */ - e->vid = e->rvid = (r[0] << 20) & 0xfff; - e->mc_gip = r[1]; - e->mc_portmask_index = (r[2] >> 6) & 0xfff; - } - if (e->is_ip_mc) { - e->valid = true; - e->type = IP4_MULTICAST; - } - if (e->is_ipv6_mc) { - e->valid = true; - e->type = IP6_MULTICAST; - } - /* pr_info("%s: vid %d, rvid: %d\n", __func__, e->vid, e->rvid); */ -} - -/* Fills the 3 SoC table registers r[] with the information in the rtl838x_l2_entry */ -static void rtl839x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) -{ - if (!e->valid) { - r[0] = r[1] = r[2] = 0; - return; - } - - r[2] = e->is_ip_mc ? BIT(31) : 0; - r[2] |= e->is_ipv6_mc ? BIT(30) : 0; - - if (!e->is_ip_mc && !e->is_ipv6_mc) { - r[0] = ((u32)e->mac[0]) << 12; - r[0] |= ((u32)e->mac[1]) << 4; - r[0] |= ((u32)e->mac[2]) >> 4; - r[1] = ((u32)e->mac[2]) << 28; - r[1] |= ((u32)e->mac[3]) << 20; - r[1] |= ((u32)e->mac[4]) << 12; - r[1] |= ((u32)e->mac[5]) << 4; - - if (!(e->mac[0] & 1)) { /* Not multicast */ - r[2] |= e->is_static ? BIT(18) : 0; - r[0] |= ((u32)e->rvid) << 20; - r[2] |= e->port << 24; - r[2] |= e->block_da ? BIT(19) : 0; - r[2] |= e->block_sa ? BIT(20) : 0; - r[2] |= e->suspended ? BIT(17) : 0; - r[2] |= ((u32)e->age) << 21; - if (e->next_hop) { - r[2] |= BIT(16); - r[2] |= e->nh_vlan_target ? BIT(15) : 0; - r[2] |= (e->nh_route_id & 0x7ff) << 4; - } else { - r[2] |= e->vid << 4; - } - pr_debug("Write L2 NH: %08x %08x %08x\n", r[0], r[1], r[2]); - } else { /* L2 Multicast */ - r[0] |= ((u32)e->rvid) << 20; - r[2] |= ((u32)e->mc_portmask_index) << 6; - } - } else { /* IPv4 or IPv6 MC entry */ - r[0] = ((u32)e->rvid) << 20; - r[1] = e->mc_gip; - r[2] |= ((u32)e->mc_portmask_index) << 6; - } -} - -/* Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table - * hash is the id of the bucket and pos is the position of the entry in that bucket - * The data read from the SoC is filled into rtl838x_l2_entry - */ -static u64 rtl839x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 0); - u32 idx = (0 << 14) | (hash << 2) | pos; /* Search SRAM, with hash and at pos in bucket */ - - rtl_table_read(q, idx); - for (int i = 0; i < 3; i++) - r[i] = sw_r32(rtl_table_data(q, i)); - - rtl_table_release(q); - - rtl839x_fill_l2_entry(r, e); - if (!e->valid) - return 0; - - return rtl839x_l2_hash_seed(ether_addr_to_u64(&e->mac[0]), e->rvid); -} - -static void rtl839x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 0); - - u32 idx = (0 << 14) | (hash << 2) | pos; /* Access SRAM, with hash and at pos in bucket */ - - rtl839x_fill_l2_row(r, e); - - for (int i = 0; i < 3; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); -} - -static u64 rtl839x_read_cam(int idx, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 1); /* Access L2 Table 1 */ - - rtl_table_read(q, idx); - for (int i = 0; i < 3; i++) - r[i] = sw_r32(rtl_table_data(q, i)); - - rtl_table_release(q); - - rtl839x_fill_l2_entry(r, e); - if (!e->valid) - return 0; - - pr_debug("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); - - /* Return MAC with concatenated VID ac concatenated ID */ - return rtl839x_l2_hash_seed(ether_addr_to_u64(&e->mac[0]), e->rvid); -} - -static void rtl839x_write_cam(int idx, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 1); /* Access L2 Table 1 */ - - rtl839x_fill_l2_row(r, e); - - for (int i = 0; i < 3; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); -} - -static u64 rtl839x_read_mcast_pmask(int idx) -{ - u64 portmask; - /* Read MC_PMSK (2) via register RTL8390_TBL_L2 */ - struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 2); - - rtl_table_read(q, idx); - portmask = sw_r32(rtl_table_data(q, 0)); - portmask <<= 32; - portmask |= sw_r32(rtl_table_data(q, 1)); - portmask >>= 11; /* LSB is bit 11 in data registers */ - rtl_table_release(q); - - return portmask; -} - -static void rtl839x_write_mcast_pmask(int idx, u64 portmask) -{ - /* Access MC_PMSK (2) via register RTL8380_TBL_L2 */ - struct table_reg *q = rtl_table_get(RTL8390_TBL_L2, 2); - - portmask <<= 11; /* LSB is bit 11 in data registers */ - sw_w32((u32)(portmask >> 32), rtl_table_data(q, 0)); - sw_w32((u32)((portmask & 0xfffff800)), rtl_table_data(q, 1)); - rtl_table_write(q, idx); - rtl_table_release(q); -} - -static void rtl839x_vlan_profile_setup(int profile) -{ - u32 p[2]; - u32 pmask_id = UNKNOWN_MC_PMASK; - - p[0] = pmask_id; /* Use portmaks 0xfff for unknown IPv6 MC flooding */ - /* Enable L2 Learning BIT 0, portmask UNKNOWN_MC_PMASK for IP/L2-MC traffic flooding */ - p[1] = 1 | pmask_id << 1 | pmask_id << 13; - - sw_w32(p[0], RTL839X_VLAN_PROFILE(profile)); - sw_w32(p[1], RTL839X_VLAN_PROFILE(profile) + 4); - - rtl839x_write_mcast_pmask(UNKNOWN_MC_PMASK, 0x001fffffffffffff); -} - -u64 rtl839x_traffic_get(int source) -{ - return rtl839x_get_port_reg_be(rtl839x_port_iso_ctrl(source)); -} - -void rtl839x_traffic_set(int source, u64 dest_matrix) -{ - rtl839x_set_port_reg_be(dest_matrix, rtl839x_port_iso_ctrl(source)); -} - -void rtl839x_traffic_enable(int source, int dest) -{ - rtl839x_mask_port_reg_be(0, BIT_ULL(dest), rtl839x_port_iso_ctrl(source)); -} - -void rtl839x_traffic_disable(int source, int dest) -{ - rtl839x_mask_port_reg_be(BIT_ULL(dest), 0, rtl839x_port_iso_ctrl(source)); -} - -static void rtl839x_l2_learning_setup(void) -{ - /* Set portmask for broadcast (offset bit 12) and unknown unicast (offset 0) - * address flooding to the reserved entry in the portmask table used - * also for multicast flooding */ - sw_w32(UNKNOWN_MC_PMASK << 12 | UNKNOWN_MC_PMASK, RTL839X_L2_FLD_PMSK); - - /* Limit learning to maximum: 32k entries, after that just flood (bits 0-1) */ - sw_w32((0x7fff << 2) | 0, RTL839X_L2_LRN_CONSTRT); - - /* Do not trap ARP packets to CPU_PORT */ - sw_w32(0, RTL839X_SPCL_TRAP_ARP_CTRL); -} - -static void rtl839x_enable_learning(int port, bool enable) -{ - /* Limit learning to maximum: 32k entries */ - - sw_w32_mask(0x7fff << 2, enable ? (0x7fff << 2) : 0, - RTL839X_L2_PORT_LRN_CONSTRT + (port << 2)); -} - -static void rtl839x_enable_flood(int port, bool enable) -{ - /* 0: Forward - * 1: Disable - * 2: to CPU - * 3: Copy to CPU - */ - sw_w32_mask(0x3, enable ? 0 : 1, - RTL839X_L2_PORT_LRN_CONSTRT + (port << 2)); -} - -static void rtl839x_enable_mcast_flood(int port, bool enable) -{ - -} - -static void rtl839x_enable_bcast_flood(int port, bool enable) -{ - -} - -static void rtl839x_set_static_move_action(int port, bool forward) -{ - int shift = MV_ACT_PORT_SHIFT(port); - u32 val = forward ? MV_ACT_FORWARD : MV_ACT_DROP; - - sw_w32_mask(MV_ACT_MASK << shift, val << shift, - RTL839X_L2_PORT_STATIC_MV_ACT(port)); -} - -irqreturn_t rtl839x_switch_irq(int irq, void *dev_id) -{ - struct dsa_switch *ds = dev_id; - u32 status = sw_r32(RTL839X_ISR_GLB_SRC); - u64 ports = rtl839x_get_port_reg_le(RTL839X_ISR_PORT_LINK_STS_CHG); - u64 link; - - /* Clear status */ - rtl839x_set_port_reg_le(ports, RTL839X_ISR_PORT_LINK_STS_CHG); - pr_debug("RTL8390 Link change: status: %x, ports %llx\n", status, ports); - - for (int i = 0; i < RTL839X_CPU_PORT; i++) { - if (ports & BIT_ULL(i)) { - link = rtl839x_get_port_reg_le(RTL839X_MAC_LINK_STS); - if (link & BIT_ULL(i)) - dsa_port_phylink_mac_change(ds, i, true); - else - dsa_port_phylink_mac_change(ds, i, false); - } - } - - return IRQ_HANDLED; -} - -/* TODO: unused */ -int rtl8390_sds_power(int mac, int val) -{ - u32 offset = (mac == 48) ? 0x0 : 0x100; - u32 mode = val ? 0 : 1; - - pr_debug("In %s: mac %d, set %d\n", __func__, mac, val); - - if ((mac != 48) && (mac != 49)) { - pr_err("%s: not an SFP port: %d\n", __func__, mac); - return -1; - } - - /* Set bit 1003. 1000 starts at 7c */ - sw_w32_mask(BIT(11), mode << 11, RTL839X_SDS12_13_PWR0 + offset); - - return 0; -} - -static int rtl839x_smi_wait_op(int timeout) -{ - int ret = 0; - u32 val; - - ret = readx_poll_timeout(sw_r32, RTL839X_PHYREG_ACCESS_CTRL, - val, !(val & 0x1), 20, timeout); - if (ret) - pr_err("%s: timeout\n", __func__); - - return ret; -} - -int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val) -{ - u32 v; - int err = 0; - - if (port > 63 || page > 4095 || reg > 31) - return -ENOTSUPP; - - /* Take bug on RTL839x Rev <= C into account */ - if (port >= RTL839X_CPU_PORT) - return -EIO; - - mutex_lock(&smi_lock); - - sw_w32_mask(0xffff0000, port << 16, RTL839X_PHYREG_DATA_CTRL); - v = reg << 5 | page << 10 | ((page == 0x1fff) ? 0x1f : 0) << 23; - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - sw_w32(0x1ff, RTL839X_PHYREG_CTRL); - - v |= 1; - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - err = rtl839x_smi_wait_op(100000); - if (err) - goto errout; - - *val = sw_r32(RTL839X_PHYREG_DATA_CTRL) & 0xffff; - -errout: - mutex_unlock(&smi_lock); - - return err; -} - -int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val) -{ - u32 v; - int err = 0; - - val &= 0xffff; - if (port > 63 || page > 4095 || reg > 31) - return -ENOTSUPP; - - /* Take bug on RTL839x Rev <= C into account */ - if (port >= RTL839X_CPU_PORT) - return -EIO; - - mutex_lock(&smi_lock); - - /* Set PHY to access */ - rtl839x_set_port_reg_le(BIT_ULL(port), RTL839X_PHYREG_PORT_CTRL); - - sw_w32_mask(0xffff0000, val << 16, RTL839X_PHYREG_DATA_CTRL); - - v = reg << 5 | page << 10 | ((page == 0x1fff) ? 0x1f : 0) << 23; - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - sw_w32(0x1ff, RTL839X_PHYREG_CTRL); - - v |= BIT(3) | 1; /* Write operation and execute */ - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - err = rtl839x_smi_wait_op(100000); - if (err) - goto errout; - - if (sw_r32(RTL839X_PHYREG_ACCESS_CTRL) & 0x2) - err = -EIO; - -errout: - mutex_unlock(&smi_lock); - - return err; -} - -/* Read an mmd register of the PHY */ -int rtl839x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val) -{ - int err = 0; - u32 v; - - /* Take bug on RTL839x Rev <= C into account */ - if (port >= RTL839X_CPU_PORT) - return -EIO; - - mutex_lock(&smi_lock); - - /* Set PHY to access */ - sw_w32_mask(0xffff << 16, port << 16, RTL839X_PHYREG_DATA_CTRL); - - /* Set MMD device number and register to write to */ - sw_w32(devnum << 16 | (regnum & 0xffff), RTL839X_PHYREG_MMD_CTRL); - - v = BIT(2) | BIT(0); /* MMD-access | EXEC */ - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - err = rtl839x_smi_wait_op(100000); - if (err) - goto errout; - - /* There is no error-checking via BIT 1 of v, as it does not seem to be set correctly */ - *val = (sw_r32(RTL839X_PHYREG_DATA_CTRL) & 0xffff); - pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, *val, err); - -errout: - mutex_unlock(&smi_lock); - - return err; -} - -/* Write to an mmd register of the PHY */ -int rtl839x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val) -{ - int err = 0; - u32 v; - - /* Take bug on RTL839x Rev <= C into account */ - if (port >= RTL839X_CPU_PORT) - return -EIO; - - mutex_lock(&smi_lock); - - /* Set PHY to access */ - rtl839x_set_port_reg_le(BIT_ULL(port), RTL839X_PHYREG_PORT_CTRL); - - /* Set data to write */ - sw_w32_mask(0xffff << 16, val << 16, RTL839X_PHYREG_DATA_CTRL); - - /* Set MMD device number and register to write to */ - sw_w32(devnum << 16 | (regnum & 0xffff), RTL839X_PHYREG_MMD_CTRL); - - v = BIT(3) | BIT(2) | BIT(0); /* WRITE | MMD-access | EXEC */ - sw_w32(v, RTL839X_PHYREG_ACCESS_CTRL); - - err = rtl839x_smi_wait_op(100000); - if (err) - goto errout; - - pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, val, err); - -errout: - mutex_unlock(&smi_lock); - - return err; -} - -void rtl8390_get_version(struct rtl838x_switch_priv *priv) -{ - u32 info, model; - - sw_w32_mask(0xf << 28, 0xa << 28, RTL839X_CHIP_INFO); - info = sw_r32(RTL839X_CHIP_INFO); - - model = sw_r32(RTL839X_MODEL_NAME_INFO); - priv->version = RTL8390_VERSION_A + ((model & 0x3f) >> 1); - - pr_info("RTL839X Chip-Info: %x, version %c\n", info, priv->version); -} - -void rtl839x_vlan_profile_dump(int profile) -{ - u32 p[2]; - - if (profile < 0 || profile > 7) - return; - - p[0] = sw_r32(RTL839X_VLAN_PROFILE(profile)); - p[1] = sw_r32(RTL839X_VLAN_PROFILE(profile) + 4); - - pr_info("VLAN profile %d: L2 learning: %d, UNKN L2MC FLD PMSK %d, \ - UNKN IPMC FLD PMSK %d, UNKN IPv6MC FLD PMSK: %d", - profile, p[1] & 1, (p[1] >> 1) & 0xfff, (p[1] >> 13) & 0xfff, - (p[0]) & 0xfff); - pr_info("VLAN profile %d: raw %08x, %08x\n", profile, p[0], p[1]); -} - -static void rtl839x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) -{ - u32 cmd = 1 << 16 | /* Execute cmd */ - 0 << 15 | /* Read */ - 5 << 12 | /* Table type 0b101 */ - (msti & 0xfff); - priv->r->exec_tbl0_cmd(cmd); - - for (int i = 0; i < 4; i++) - port_state[i] = sw_r32(priv->r->tbl_access_data_0(i)); -} - -static void rtl839x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) -{ - u32 cmd = 1 << 16 | /* Execute cmd */ - 1 << 15 | /* Write */ - 5 << 12 | /* Table type 0b101 */ - (msti & 0xfff); - for (int i = 0; i < 4; i++) - sw_w32(port_state[i], priv->r->tbl_access_data_0(i)); - priv->r->exec_tbl0_cmd(cmd); -} - -/* Enables or disables the EEE/EEEP capability of a port */ -void rtl839x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enable) -{ - u32 v; - - /* This works only for Ethernet ports, and on the RTL839X, ports above 47 are SFP */ - if (port >= 48) - return; - - enable = true; - pr_debug("In %s: setting port %d to %d\n", __func__, port, enable); - v = enable ? 0xf : 0x0; - - /* Set EEE for 100, 500, 1000MBit and 10GBit */ - sw_w32_mask(0xf << 8, v << 8, rtl839x_mac_force_mode_ctrl(port)); - - /* Set TX/RX EEE state */ - v = enable ? 0x3 : 0x0; - sw_w32(v, RTL839X_EEE_CTRL(port)); - - priv->ports[port].eee_enabled = enable; -} - -/* Get EEE own capabilities and negotiation result */ -int rtl839x_eee_port_ability(struct rtl838x_switch_priv *priv, struct ethtool_eee *e, int port) -{ - u64 link, a; - - if (port >= 48) - return 0; - - link = rtl839x_get_port_reg_le(RTL839X_MAC_LINK_STS); - if (!(link & BIT_ULL(port))) - return 0; - - if (sw_r32(rtl839x_mac_force_mode_ctrl(port)) & BIT(8)) - e->advertised |= ADVERTISED_100baseT_Full; - - if (sw_r32(rtl839x_mac_force_mode_ctrl(port)) & BIT(10)) - e->advertised |= ADVERTISED_1000baseT_Full; - - a = rtl839x_get_port_reg_le(RTL839X_MAC_EEE_ABLTY); - pr_info("Link partner: %016llx\n", a); - if (rtl839x_get_port_reg_le(RTL839X_MAC_EEE_ABLTY) & BIT_ULL(port)) { - e->lp_advertised = ADVERTISED_100baseT_Full; - e->lp_advertised |= ADVERTISED_1000baseT_Full; - return 1; - } - - return 0; -} - -static void rtl839x_init_eee(struct rtl838x_switch_priv *priv, bool enable) -{ - pr_info("Setting up EEE, state: %d\n", enable); - - /* Set wake timer for TX and pause timer both to 0x21 */ - sw_w32_mask(0xff << 20| 0xff, 0x21 << 20| 0x21, RTL839X_EEE_TX_TIMER_GELITE_CTRL); - /* Set pause wake timer for GIGA-EEE to 0x11 */ - sw_w32_mask(0xff << 20, 0x11 << 20, RTL839X_EEE_TX_TIMER_GIGA_CTRL); - /* Set pause wake timer for 10GBit ports to 0x11 */ - sw_w32_mask(0xff << 20, 0x11 << 20, RTL839X_EEE_TX_TIMER_10G_CTRL); - - /* Setup EEE on all ports */ - for (int i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) - rtl839x_port_eee_set(priv, i, enable); - } - priv->eee_enabled = enable; -} - -static void rtl839x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int index) -{ - int block = index / PIE_BLOCK_SIZE; - - sw_w32_mask(0, BIT(block), RTL839X_ACL_BLK_LOOKUP_CTRL); -} - -/* Delete a range of Packet Inspection Engine rules */ -static int rtl839x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to) -{ - u32 v = (index_from << 1)| (index_to << 13 ) | BIT(0); - - pr_debug("%s: from %d to %d\n", __func__, index_from, index_to); - mutex_lock(&priv->reg_mutex); - - /* Write from-to and execute bit into control register */ - sw_w32(v, RTL839X_ACL_CLR_CTRL); - - /* Wait until command has completed */ - do { - } while (sw_r32(RTL839X_ACL_CLR_CTRL) & BIT(0)); - - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -/* Reads the intermediate representation of the templated match-fields of the - * PIE rule in the pie_rule structure and fills in the raw data fields in the - * raw register space r[]. - * The register space configuration size is identical for the RTL8380/90 and RTL9300, - * however the RTL9310 has 2 more registers / fields and the physical field-ids are different - * on all SoCs - * On the RTL8390 the template mask registers are not word-aligned! - */ -static void rtl839x_write_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[]) -{ - for (int i = 0; i < N_FIXED_FIELDS; i++) { - enum template_field_id field_type = t[i]; - u16 data = 0, data_m = 0; - - switch (field_type) { - case TEMPLATE_FIELD_SPM0: - data = pr->spm; - data_m = pr->spm_m; - break; - case TEMPLATE_FIELD_SPM1: - data = pr->spm >> 16; - data_m = pr->spm_m >> 16; - break; - case TEMPLATE_FIELD_SPM2: - data = pr->spm >> 32; - data_m = pr->spm_m >> 32; - break; - case TEMPLATE_FIELD_SPM3: - data = pr->spm >> 48; - data_m = pr->spm_m >> 48; - break; - case TEMPLATE_FIELD_OTAG: - data = pr->otag; - data_m = pr->otag_m; - break; - case TEMPLATE_FIELD_SMAC0: - data = pr->smac[4]; - data = (data << 8) | pr->smac[5]; - data_m = pr->smac_m[4]; - data_m = (data_m << 8) | pr->smac_m[5]; - break; - case TEMPLATE_FIELD_SMAC1: - data = pr->smac[2]; - data = (data << 8) | pr->smac[3]; - data_m = pr->smac_m[2]; - data_m = (data_m << 8) | pr->smac_m[3]; - break; - case TEMPLATE_FIELD_SMAC2: - data = pr->smac[0]; - data = (data << 8) | pr->smac[1]; - data_m = pr->smac_m[0]; - data_m = (data_m << 8) | pr->smac_m[1]; - break; - case TEMPLATE_FIELD_DMAC0: - data = pr->dmac[4]; - data = (data << 8) | pr->dmac[5]; - data_m = pr->dmac_m[4]; - data_m = (data_m << 8) | pr->dmac_m[5]; - break; - case TEMPLATE_FIELD_DMAC1: - data = pr->dmac[2]; - data = (data << 8) | pr->dmac[3]; - data_m = pr->dmac_m[2]; - data_m = (data_m << 8) | pr->dmac_m[3]; - break; - case TEMPLATE_FIELD_DMAC2: - data = pr->dmac[0]; - data = (data << 8) | pr->dmac[1]; - data_m = pr->dmac_m[0]; - data_m = (data_m << 8) | pr->dmac_m[1]; - break; - case TEMPLATE_FIELD_ETHERTYPE: - data = pr->ethertype; - data_m = pr->ethertype_m; - break; - case TEMPLATE_FIELD_ITAG: - data = pr->itag; - data_m = pr->itag_m; - break; - case TEMPLATE_FIELD_SIP0: - if (pr->is_ipv6) { - data = pr->sip6.s6_addr16[7]; - data_m = pr->sip6_m.s6_addr16[7]; - } else { - data = pr->sip; - data_m = pr->sip_m; - } - break; - case TEMPLATE_FIELD_SIP1: - if (pr->is_ipv6) { - data = pr->sip6.s6_addr16[6]; - data_m = pr->sip6_m.s6_addr16[6]; - } else { - data = pr->sip >> 16; - data_m = pr->sip_m >> 16; - } - break; - case TEMPLATE_FIELD_SIP2: - case TEMPLATE_FIELD_SIP3: - case TEMPLATE_FIELD_SIP4: - case TEMPLATE_FIELD_SIP5: - case TEMPLATE_FIELD_SIP6: - case TEMPLATE_FIELD_SIP7: - data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; - data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; - break; - case TEMPLATE_FIELD_DIP0: - if (pr->is_ipv6) { - data = pr->dip6.s6_addr16[7]; - data_m = pr->dip6_m.s6_addr16[7]; - } else { - data = pr->dip; - data_m = pr->dip_m; - } - break; - case TEMPLATE_FIELD_DIP1: - if (pr->is_ipv6) { - data = pr->dip6.s6_addr16[6]; - data_m = pr->dip6_m.s6_addr16[6]; - } else { - data = pr->dip >> 16; - data_m = pr->dip_m >> 16; - } - break; - case TEMPLATE_FIELD_DIP2: - case TEMPLATE_FIELD_DIP3: - case TEMPLATE_FIELD_DIP4: - case TEMPLATE_FIELD_DIP5: - case TEMPLATE_FIELD_DIP6: - case TEMPLATE_FIELD_DIP7: - data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; - data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; - break; - case TEMPLATE_FIELD_IP_TOS_PROTO: - data = pr->tos_proto; - data_m = pr->tos_proto_m; - break; - case TEMPLATE_FIELD_L4_SPORT: - data = pr->sport; - data_m = pr->sport_m; - break; - case TEMPLATE_FIELD_L4_DPORT: - data = pr->dport; - data_m = pr->dport_m; - break; - case TEMPLATE_FIELD_ICMP_IGMP: - data = pr->icmp_igmp; - data_m = pr->icmp_igmp_m; - break; - default: - pr_info("%s: unknown field %d\n", __func__, field_type); - } - - /* On the RTL8390, the mask fields are not word aligned! */ - if (!(i % 2)) { - r[5 - i / 2] = data; - r[12 - i / 2] |= ((u32)data_m << 8); - } else { - r[5 - i / 2] |= ((u32)data) << 16; - r[12 - i / 2] |= ((u32)data_m) << 24; - r[11 - i / 2] |= ((u32)data_m) >> 8; - } - } -} - -/* Creates the intermediate representation of the templated match-fields of the - * PIE rule in the pie_rule structure by reading the raw data fields in the - * raw register space r[]. - * The register space configuration size is identical for the RTL8380/90 and RTL9300, - * however the RTL9310 has 2 more registers / fields and the physical field-ids - * On the RTL8390 the template mask registers are not word-aligned! - */ -void rtl839x_read_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[]) -{ - for (int i = 0; i < N_FIXED_FIELDS; i++) { - enum template_field_id field_type = t[i]; - u16 data, data_m; - - if (!(i % 2)) { - data = r[5 - i / 2]; - data_m = r[12 - i / 2]; - } else { - data = r[5 - i / 2] >> 16; - data_m = r[12 - i / 2] >> 16; - } - - switch (field_type) { - case TEMPLATE_FIELD_SPM0: - pr->spm = (pr->spn << 16) | data; - pr->spm_m = (pr->spn << 16) | data_m; - break; - case TEMPLATE_FIELD_SPM1: - pr->spm = data; - pr->spm_m = data_m; - break; - case TEMPLATE_FIELD_OTAG: - pr->otag = data; - pr->otag_m = data_m; - break; - case TEMPLATE_FIELD_SMAC0: - pr->smac[4] = data >> 8; - pr->smac[5] = data; - pr->smac_m[4] = data >> 8; - pr->smac_m[5] = data; - break; - case TEMPLATE_FIELD_SMAC1: - pr->smac[2] = data >> 8; - pr->smac[3] = data; - pr->smac_m[2] = data >> 8; - pr->smac_m[3] = data; - break; - case TEMPLATE_FIELD_SMAC2: - pr->smac[0] = data >> 8; - pr->smac[1] = data; - pr->smac_m[0] = data >> 8; - pr->smac_m[1] = data; - break; - case TEMPLATE_FIELD_DMAC0: - pr->dmac[4] = data >> 8; - pr->dmac[5] = data; - pr->dmac_m[4] = data >> 8; - pr->dmac_m[5] = data; - break; - case TEMPLATE_FIELD_DMAC1: - pr->dmac[2] = data >> 8; - pr->dmac[3] = data; - pr->dmac_m[2] = data >> 8; - pr->dmac_m[3] = data; - break; - case TEMPLATE_FIELD_DMAC2: - pr->dmac[0] = data >> 8; - pr->dmac[1] = data; - pr->dmac_m[0] = data >> 8; - pr->dmac_m[1] = data; - break; - case TEMPLATE_FIELD_ETHERTYPE: - pr->ethertype = data; - pr->ethertype_m = data_m; - break; - case TEMPLATE_FIELD_ITAG: - pr->itag = data; - pr->itag_m = data_m; - break; - case TEMPLATE_FIELD_SIP0: - pr->sip = data; - pr->sip_m = data_m; - break; - case TEMPLATE_FIELD_SIP1: - pr->sip = (pr->sip << 16) | data; - pr->sip_m = (pr->sip << 16) | data_m; - break; - case TEMPLATE_FIELD_SIP2: - pr->is_ipv6 = true; - /* Make use of limitiations on the position of the match values */ - ipv6_addr_set(&pr->sip6, pr->sip, r[5 - i / 2], - r[4 - i / 2], r[3 - i / 2]); - ipv6_addr_set(&pr->sip6_m, pr->sip_m, r[5 - i / 2], - r[4 - i / 2], r[3 - i / 2]); - case TEMPLATE_FIELD_SIP3: - case TEMPLATE_FIELD_SIP4: - case TEMPLATE_FIELD_SIP5: - case TEMPLATE_FIELD_SIP6: - case TEMPLATE_FIELD_SIP7: - break; - - case TEMPLATE_FIELD_DIP0: - pr->dip = data; - pr->dip_m = data_m; - break; - - case TEMPLATE_FIELD_DIP1: - pr->dip = (pr->dip << 16) | data; - pr->dip_m = (pr->dip << 16) | data_m; - break; - - case TEMPLATE_FIELD_DIP2: - pr->is_ipv6 = true; - ipv6_addr_set(&pr->dip6, pr->dip, r[5 - i / 2], - r[4 - i / 2], r[3 - i / 2]); - ipv6_addr_set(&pr->dip6_m, pr->dip_m, r[5 - i / 2], - r[4 - i / 2], r[3 - i / 2]); - case TEMPLATE_FIELD_DIP3: - case TEMPLATE_FIELD_DIP4: - case TEMPLATE_FIELD_DIP5: - case TEMPLATE_FIELD_DIP6: - case TEMPLATE_FIELD_DIP7: - break; - case TEMPLATE_FIELD_IP_TOS_PROTO: - pr->tos_proto = data; - pr->tos_proto_m = data_m; - break; - case TEMPLATE_FIELD_L4_SPORT: - pr->sport = data; - pr->sport_m = data_m; - break; - case TEMPLATE_FIELD_L4_DPORT: - pr->dport = data; - pr->dport_m = data_m; - break; - case TEMPLATE_FIELD_ICMP_IGMP: - pr->icmp_igmp = data; - pr->icmp_igmp_m = data_m; - break; - default: - pr_info("%s: unknown field %d\n", __func__, field_type); - } - } -} - -static void rtl839x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) -{ - pr->spmmask_fix = (r[6] >> 30) & 0x3; - pr->spn = (r[6] >> 24) & 0x3f; - pr->mgnt_vlan = (r[6] >> 23) & 1; - pr->dmac_hit_sw = (r[6] >> 22) & 1; - pr->not_first_frag = (r[6] >> 21) & 1; - pr->frame_type_l4 = (r[6] >> 18) & 7; - pr->frame_type = (r[6] >> 16) & 3; - pr->otag_fmt = (r[6] >> 15) & 1; - pr->itag_fmt = (r[6] >> 14) & 1; - pr->otag_exist = (r[6] >> 13) & 1; - pr->itag_exist = (r[6] >> 12) & 1; - pr->frame_type_l2 = (r[6] >> 10) & 3; - pr->tid = (r[6] >> 8) & 3; - - pr->spmmask_fix_m = (r[12] >> 6) & 0x3; - pr->spn_m = r[12] & 0x3f; - pr->mgnt_vlan_m = (r[13] >> 31) & 1; - pr->dmac_hit_sw_m = (r[13] >> 30) & 1; - pr->not_first_frag_m = (r[13] >> 29) & 1; - pr->frame_type_l4_m = (r[13] >> 26) & 7; - pr->frame_type_m = (r[13] >> 24) & 3; - pr->otag_fmt_m = (r[13] >> 23) & 1; - pr->itag_fmt_m = (r[13] >> 22) & 1; - pr->otag_exist_m = (r[13] >> 21) & 1; - pr->itag_exist_m = (r[13] >> 20) & 1; - pr->frame_type_l2_m = (r[13] >> 18) & 3; - pr->tid_m = (r[13] >> 16) & 3; - - pr->valid = r[13] & BIT(15); - pr->cond_not = r[13] & BIT(14); - pr->cond_and1 = r[13] & BIT(13); - pr->cond_and2 = r[13] & BIT(12); -} - -static void rtl839x_write_pie_fixed_fields(u32 r[], struct pie_rule *pr) -{ - r[6] = ((u32) (pr->spmmask_fix & 0x3)) << 30; - r[6] |= ((u32) (pr->spn & 0x3f)) << 24; - r[6] |= pr->mgnt_vlan ? BIT(23) : 0; - r[6] |= pr->dmac_hit_sw ? BIT(22) : 0; - r[6] |= pr->not_first_frag ? BIT(21) : 0; - r[6] |= ((u32) (pr->frame_type_l4 & 0x7)) << 18; - r[6] |= ((u32) (pr->frame_type & 0x3)) << 16; - r[6] |= pr->otag_fmt ? BIT(15) : 0; - r[6] |= pr->itag_fmt ? BIT(14) : 0; - r[6] |= pr->otag_exist ? BIT(13) : 0; - r[6] |= pr->itag_exist ? BIT(12) : 0; - r[6] |= ((u32) (pr->frame_type_l2 & 0x3)) << 10; - r[6] |= ((u32) (pr->tid & 0x3)) << 8; - - r[12] |= ((u32) (pr->spmmask_fix_m & 0x3)) << 6; - r[12] |= (u32) (pr->spn_m & 0x3f); - r[13] |= pr->mgnt_vlan_m ? BIT(31) : 0; - r[13] |= pr->dmac_hit_sw_m ? BIT(30) : 0; - r[13] |= pr->not_first_frag_m ? BIT(29) : 0; - r[13] |= ((u32) (pr->frame_type_l4_m & 0x7)) << 26; - r[13] |= ((u32) (pr->frame_type_m & 0x3)) << 24; - r[13] |= pr->otag_fmt_m ? BIT(23) : 0; - r[13] |= pr->itag_fmt_m ? BIT(22) : 0; - r[13] |= pr->otag_exist_m ? BIT(21) : 0; - r[13] |= pr->itag_exist_m ? BIT(20) : 0; - r[13] |= ((u32) (pr->frame_type_l2_m & 0x3)) << 18; - r[13] |= ((u32) (pr->tid_m & 0x3)) << 16; - - r[13] |= pr->valid ? BIT(15) : 0; - r[13] |= pr->cond_not ? BIT(14) : 0; - r[13] |= pr->cond_and1 ? BIT(13) : 0; - r[13] |= pr->cond_and2 ? BIT(12) : 0; -} - -static void rtl839x_write_pie_action(u32 r[], struct pie_rule *pr) -{ - if (pr->drop) { - r[13] |= 0x9; /* Set ACT_MASK_FWD & FWD_ACT = DROP */ - r[13] |= BIT(3); - } else { - r[13] |= pr->fwd_sel ? BIT(3) : 0; - r[13] |= pr->fwd_act; - } - r[13] |= pr->bypass_sel ? BIT(11) : 0; - r[13] |= pr->mpls_sel ? BIT(10) : 0; - r[13] |= pr->nopri_sel ? BIT(9) : 0; - r[13] |= pr->ovid_sel ? BIT(8) : 0; - r[13] |= pr->ivid_sel ? BIT(7) : 0; - r[13] |= pr->meter_sel ? BIT(6) : 0; - r[13] |= pr->mir_sel ? BIT(5) : 0; - r[13] |= pr->log_sel ? BIT(4) : 0; - - r[14] |= ((u32)(pr->fwd_data & 0x3fff)) << 18; - r[14] |= pr->log_octets ? BIT(17) : 0; - r[14] |= ((u32)(pr->log_data & 0x7ff)) << 4; - r[14] |= (pr->mir_data & 0x3) << 3; - r[14] |= ((u32)(pr->meter_data >> 7)) & 0x7; - r[15] |= (u32)(pr->meter_data) << 26; - r[15] |= ((u32)(pr->ivid_act) << 23) & 0x3; - r[15] |= ((u32)(pr->ivid_data) << 9) & 0xfff; - r[15] |= ((u32)(pr->ovid_act) << 6) & 0x3; - r[15] |= ((u32)(pr->ovid_data) >> 4) & 0xff; - r[16] |= ((u32)(pr->ovid_data) & 0xf) << 28; - r[16] |= ((u32)(pr->nopri_data) & 0x7) << 20; - r[16] |= ((u32)(pr->mpls_act) & 0x7) << 20; - r[16] |= ((u32)(pr->mpls_lib_idx) & 0x7) << 20; - r[16] |= pr->bypass_all ? BIT(9) : 0; - r[16] |= pr->bypass_igr_stp ? BIT(8) : 0; - r[16] |= pr->bypass_ibc_sc ? BIT(7) : 0; -} - -static void rtl839x_read_pie_action(u32 r[], struct pie_rule *pr) -{ - if (r[13] & BIT(3)) { /* ACT_MASK_FWD set, is it a drop? */ - if ((r[14] & 0x7) == 1) { - pr->drop = true; - } else { - pr->fwd_sel = true; - pr->fwd_act = r[14] & 0x7; - } - } - - pr->bypass_sel = r[13] & BIT(11); - pr->mpls_sel = r[13] & BIT(10); - pr->nopri_sel = r[13] & BIT(9); - pr->ovid_sel = r[13] & BIT(8); - pr->ivid_sel = r[13] & BIT(7); - pr->meter_sel = r[13] & BIT(6); - pr->mir_sel = r[13] & BIT(5); - pr->log_sel = r[13] & BIT(4); - - /* TODO: Read in data fields */ - - pr->bypass_all = r[16] & BIT(9); - pr->bypass_igr_stp = r[16] & BIT(8); - pr->bypass_ibc_sc = r[16] & BIT(7); -} - -void rtl839x_pie_rule_dump_raw(u32 r[]) -{ - pr_info("Raw IACL table entry:\n"); - pr_info("Match : %08x %08x %08x %08x %08x %08x\n", r[0], r[1], r[2], r[3], r[4], r[5]); - pr_info("Fixed : %06x\n", r[6] >> 8); - pr_info("Match M: %08x %08x %08x %08x %08x %08x\n", - (r[6] << 24) | (r[7] >> 8), (r[7] << 24) | (r[8] >> 8), (r[8] << 24) | (r[9] >> 8), - (r[9] << 24) | (r[10] >> 8), (r[10] << 24) | (r[11] >> 8), - (r[11] << 24) | (r[12] >> 8)); - pr_info("R[13]: %08x\n", r[13]); - pr_info("Fixed M: %06x\n", ((r[12] << 16) | (r[13] >> 16)) & 0xffffff); - pr_info("Valid / not / and1 / and2 : %1x\n", (r[13] >> 12) & 0xf); - pr_info("r 13-16: %08x %08x %08x %08x\n", r[13], r[14], r[15], r[16]); -} - -void rtl839x_pie_rule_dump(struct pie_rule *pr) -{ - pr_info("Drop: %d, fwd: %d, ovid: %d, ivid: %d, flt: %d, log: %d, rmk: %d, meter: %d tagst: %d, mir: %d, nopri: %d, cpupri: %d, otpid: %d, itpid: %d, shape: %d\n", - pr->drop, pr->fwd_sel, pr->ovid_sel, pr->ivid_sel, pr->flt_sel, pr->log_sel, pr->rmk_sel, pr->log_sel, pr->tagst_sel, pr->mir_sel, pr->nopri_sel, - pr->cpupri_sel, pr->otpid_sel, pr->itpid_sel, pr->shaper_sel); - if (pr->fwd_sel) - pr_info("FWD: %08x\n", pr->fwd_data); - pr_info("TID: %x, %x\n", pr->tid, pr->tid_m); -} - -static int rtl839x_pie_rule_read(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr) -{ - /* Read IACL table (2) via register 0 */ - struct table_reg *q = rtl_table_get(RTL8380_TBL_0, 2); - u32 r[17]; - int block = idx / PIE_BLOCK_SIZE; - u32 t_select = sw_r32(RTL839X_ACL_BLK_TMPLTE_CTRL(block)); - - memset(pr, 0, sizeof(*pr)); - rtl_table_read(q, idx); - for (int i = 0; i < 17; i++) - r[i] = sw_r32(rtl_table_data(q, i)); - - rtl_table_release(q); - - rtl839x_read_pie_fixed_fields(r, pr); - if (!pr->valid) - return 0; - - pr_debug("%s: template_selectors %08x, tid: %d\n", __func__, t_select, pr->tid); - rtl839x_pie_rule_dump_raw(r); - - rtl839x_read_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 3)) & 0x7]); - - rtl839x_read_pie_action(r, pr); - - return 0; -} - -static int rtl839x_pie_rule_write(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr) -{ - /* Access IACL table (2) via register 0 */ - struct table_reg *q = rtl_table_get(RTL8390_TBL_0, 2); - u32 r[17]; - int block = idx / PIE_BLOCK_SIZE; - u32 t_select = sw_r32(RTL839X_ACL_BLK_TMPLTE_CTRL(block)); - - pr_debug("%s: %d, t_select: %08x\n", __func__, idx, t_select); - - for (int i = 0; i < 17; i++) - r[i] = 0; - - if (!pr->valid) { - rtl_table_write(q, idx); - rtl_table_release(q); - return 0; - } - rtl839x_write_pie_fixed_fields(r, pr); - - pr_debug("%s: template %d\n", __func__, (t_select >> (pr->tid * 3)) & 0x7); - rtl839x_write_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 3)) & 0x7]); - - rtl839x_write_pie_action(r, pr); - -/* rtl839x_pie_rule_dump_raw(r); */ - - for (int i = 0; i < 17; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); - - return 0; -} - -static bool rtl839x_pie_templ_has(int t, enum template_field_id field_type) -{ - for (int i = 0; i < N_FIXED_FIELDS; i++) { - enum template_field_id ft = fixed_templates[t][i]; - if (field_type == ft) - return true; - } - - return false; -} - -static int rtl839x_pie_verify_template(struct rtl838x_switch_priv *priv, - struct pie_rule *pr, int t, int block) -{ - int i; - - if (!pr->is_ipv6 && pr->sip_m && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_SIP0)) - return -1; - - if (!pr->is_ipv6 && pr->dip_m && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_DIP0)) - return -1; - - if (pr->is_ipv6) { - if ((pr->sip6_m.s6_addr32[0] || - pr->sip6_m.s6_addr32[1] || - pr->sip6_m.s6_addr32[2] || - pr->sip6_m.s6_addr32[3]) && - !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) - return -1; - if ((pr->dip6_m.s6_addr32[0] || - pr->dip6_m.s6_addr32[1] || - pr->dip6_m.s6_addr32[2] || - pr->dip6_m.s6_addr32[3]) && - !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) - return -1; - } - - if (ether_addr_to_u64(pr->smac) && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_SMAC0)) - return -1; - - if (ether_addr_to_u64(pr->dmac) && !rtl839x_pie_templ_has(t, TEMPLATE_FIELD_DMAC0)) - return -1; - - /* TODO: Check more */ - - i = find_first_zero_bit(&priv->pie_use_bm[block * 4], PIE_BLOCK_SIZE); - - if (i >= PIE_BLOCK_SIZE) - return -1; - - return i + PIE_BLOCK_SIZE * block; -} - -static int rtl839x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rule *pr) -{ - int idx, block, j, t; - int min_block = 0; - int max_block = priv->n_pie_blocks / 2; - - if (pr->is_egress) { - min_block = max_block; - max_block = priv->n_pie_blocks; - } - - mutex_lock(&priv->pie_mutex); - - for (block = min_block; block < max_block; block++) { - for (j = 0; j < 2; j++) { - t = (sw_r32(RTL839X_ACL_BLK_TMPLTE_CTRL(block)) >> (j * 3)) & 0x7; - idx = rtl839x_pie_verify_template(priv, pr, t, block); - if (idx >= 0) - break; - } - if (j < 2) - break; - } - - if (block >= priv->n_pie_blocks) { - mutex_unlock(&priv->pie_mutex); - return -EOPNOTSUPP; - } - - set_bit(idx, priv->pie_use_bm); - - pr->valid = true; - pr->tid = j; /* Mapped to template number */ - pr->tid_m = 0x3; - pr->id = idx; - - rtl839x_pie_lookup_enable(priv, idx); - rtl839x_pie_rule_write(priv, idx, pr); - - mutex_unlock(&priv->pie_mutex); - - return 0; -} - -static void rtl839x_pie_rule_rm(struct rtl838x_switch_priv *priv, struct pie_rule *pr) -{ - int idx = pr->id; - - rtl839x_pie_rule_del(priv, idx, idx); - clear_bit(idx, priv->pie_use_bm); -} - -static void rtl839x_pie_init(struct rtl838x_switch_priv *priv) -{ - u32 template_selectors; - - mutex_init(&priv->pie_mutex); - - /* Power on all PIE blocks */ - for (int i = 0; i < priv->n_pie_blocks; i++) - sw_w32_mask(0, BIT(i), RTL839X_PS_ACL_PWR_CTRL); - - /* Set ingress and egress ACL blocks to 50/50: first Egress block is 9 */ - sw_w32_mask(0x1f, 9, RTL839X_ACL_CTRL); /* Writes 9 to cutline field */ - - /* Include IPG in metering */ - sw_w32(1, RTL839X_METER_GLB_CTRL); - - /* Delete all present rules */ - rtl839x_pie_rule_del(priv, 0, priv->n_pie_blocks * PIE_BLOCK_SIZE - 1); - - /* Enable predefined templates 0, 1 for blocks 0-2 */ - template_selectors = 0 | (1 << 3); - for (int i = 0; i < 3; i++) - sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 2, 3 for blocks 3-5 */ - template_selectors = 2 | (3 << 3); - for (int i = 3; i < 6; i++) - sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 1, 4 for blocks 6-8 */ - template_selectors = 2 | (3 << 3); - for (int i = 6; i < 9; i++) - sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 0, 1 for blocks 9-11 */ - template_selectors = 0 | (1 << 3); - for (int i = 9; i < 12; i++) - sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 2, 3 for blocks 12-14 */ - template_selectors = 2 | (3 << 3); - for (int i = 12; i < 15; i++) - sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 1, 4 for blocks 15-17 */ - template_selectors = 2 | (3 << 3); - for (int i = 15; i < 18; i++) - sw_w32(template_selectors, RTL839X_ACL_BLK_TMPLTE_CTRL(i)); -} - -static u32 rtl839x_packet_cntr_read(int counter) -{ - u32 v; - - /* Read LOG table (4) via register RTL8390_TBL_0 */ - struct table_reg *r = rtl_table_get(RTL8390_TBL_0, 4); - - pr_debug("In %s, id %d\n", __func__, counter); - rtl_table_read(r, counter / 2); - - /* The table has a size of 2 registers */ - if (counter % 2) - v = sw_r32(rtl_table_data(r, 0)); - else - v = sw_r32(rtl_table_data(r, 1)); - - rtl_table_release(r); - - return v; -} - -static void rtl839x_packet_cntr_clear(int counter) -{ - /* Access LOG table (4) via register RTL8390_TBL_0 */ - struct table_reg *r = rtl_table_get(RTL8390_TBL_0, 4); - - pr_debug("In %s, id %d\n", __func__, counter); - /* The table has a size of 2 registers */ - if (counter % 2) - sw_w32(0, rtl_table_data(r, 0)); - else - sw_w32(0, rtl_table_data(r, 1)); - - rtl_table_write(r, counter / 2); - - rtl_table_release(r); -} - -static void rtl839x_route_read(int idx, struct rtl83xx_route *rt) -{ - u64 v; - /* Read ROUTING table (2) via register RTL8390_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL8390_TBL_1, 2); - - pr_debug("In %s\n", __func__); - rtl_table_read(r, idx); - - /* The table has a size of 2 registers */ - v = sw_r32(rtl_table_data(r, 0)); - v <<= 32; - v |= sw_r32(rtl_table_data(r, 1)); - rt->switch_mac_id = (v >> 12) & 0xf; - rt->nh.gw = v >> 16; - - rtl_table_release(r); -} - -static void rtl839x_route_write(int idx, struct rtl83xx_route *rt) -{ - u32 v; - - /* Read ROUTING table (2) via register RTL8390_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL8390_TBL_1, 2); - - pr_debug("In %s\n", __func__); - sw_w32(rt->nh.gw >> 16, rtl_table_data(r, 0)); - v = rt->nh.gw << 16; - v |= rt->switch_mac_id << 12; - sw_w32(v, rtl_table_data(r, 1)); - rtl_table_write(r, idx); - - rtl_table_release(r); -} - -/* Configure the switch's own MAC addresses used when routing packets */ -static void rtl839x_setup_port_macs(struct rtl838x_switch_priv *priv) -{ - struct net_device *dev; - u64 mac; - - pr_debug("%s: got port %08x\n", __func__, (u32)priv->ports[priv->cpu_port].dp); - dev = priv->ports[priv->cpu_port].dp->slave; - mac = ether_addr_to_u64(dev->dev_addr); - - for (int i = 0; i < 15; i++) { - mac++; /* BUG: VRRP for testing */ - sw_w32(mac >> 32, RTL839X_ROUTING_SA_CTRL + i * 8); - sw_w32(mac, RTL839X_ROUTING_SA_CTRL + i * 8 + 4); - } -} - -int rtl839x_l3_setup(struct rtl838x_switch_priv *priv) -{ - rtl839x_setup_port_macs(priv); - - return 0; -} - -void rtl839x_vlan_port_keep_tag_set(int port, bool keep_outer, bool keep_inner) -{ - sw_w32(FIELD_PREP(RTL839X_VLAN_PORT_TAG_STS_CTRL_OTAG_STS_MASK, - keep_outer ? RTL839X_VLAN_PORT_TAG_STS_TAGGED : RTL839X_VLAN_PORT_TAG_STS_UNTAG) | - FIELD_PREP(RTL839X_VLAN_PORT_TAG_STS_CTRL_ITAG_STS_MASK, - keep_inner ? RTL839X_VLAN_PORT_TAG_STS_TAGGED : RTL839X_VLAN_PORT_TAG_STS_UNTAG), - RTL839X_VLAN_PORT_TAG_STS_CTRL(port)); -} - -void rtl839x_vlan_port_pvidmode_set(int port, enum pbvlan_type type, enum pbvlan_mode mode) -{ - if (type == PBVLAN_TYPE_INNER) - sw_w32_mask(0x3, mode, RTL839X_VLAN_PORT_PB_VLAN + (port << 2)); - else - sw_w32_mask(0x3 << 14, mode << 14, RTL839X_VLAN_PORT_PB_VLAN + (port << 2)); -} - -void rtl839x_vlan_port_pvid_set(int port, enum pbvlan_type type, int pvid) -{ - if (type == PBVLAN_TYPE_INNER) - sw_w32_mask(0xfff << 2, pvid << 2, RTL839X_VLAN_PORT_PB_VLAN + (port << 2)); - else - sw_w32_mask(0xfff << 16, pvid << 16, RTL839X_VLAN_PORT_PB_VLAN + (port << 2)); -} - -static int rtl839x_set_ageing_time(unsigned long msec) -{ - int t = sw_r32(RTL839X_L2_CTRL_1); - - t &= 0x1FFFFF; - t = t * 3 / 5; /* Aging time in seconds. 0: L2 aging disabled */ - pr_debug("L2 AGING time: %d sec\n", t); - - t = (msec * 5 + 2000) / 3000; - t = t > 0x1FFFFF ? 0x1FFFFF : t; - sw_w32_mask(0x1FFFFF, t, RTL839X_L2_CTRL_1); - pr_debug("Dynamic aging for ports: %x\n", sw_r32(RTL839X_L2_PORT_AGING_OUT)); - - return 0; -} - -static void rtl839x_set_igr_filter(int port, enum igr_filter state) -{ - sw_w32_mask(0x3 << ((port & 0xf)<<1), state << ((port & 0xf)<<1), - RTL839X_VLAN_PORT_IGR_FLTR + (((port >> 4) << 2))); -} - -static void rtl839x_set_egr_filter(int port, enum egr_filter state) -{ - sw_w32_mask(0x1 << (port % 0x20), state << (port % 0x20), - RTL839X_VLAN_PORT_EGR_FLTR + (((port >> 5) << 2))); -} - -void rtl839x_set_distribution_algorithm(int group, int algoidx, u32 algomsk) -{ - sw_w32_mask(3 << ((group & 0xf) << 1), algoidx << ((group & 0xf) << 1), - RTL839X_TRK_HASH_IDX_CTRL + ((group >> 4) << 2)); - sw_w32(algomsk, RTL839X_TRK_HASH_CTRL + (algoidx << 2)); -} - -void rtl839x_set_receive_management_action(int port, rma_ctrl_t type, action_type_t action) -{ - switch(type) { - case BPDU: - sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), - RTL839X_RMA_BPDU_CTRL + ((port >> 4) << 2)); - break; - case PTP: - sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), - RTL839X_RMA_PTP_CTRL + ((port >> 4) << 2)); - break; - case LLDP: - sw_w32_mask(3 << ((port & 0xf) << 1), (action & 0x3) << ((port & 0xf) << 1), - RTL839X_RMA_LLDP_CTRL + ((port >> 4) << 2)); - break; - default: - break; - } -} - -const struct rtl838x_reg rtl839x_reg = { - .mask_port_reg_be = rtl839x_mask_port_reg_be, - .set_port_reg_be = rtl839x_set_port_reg_be, - .get_port_reg_be = rtl839x_get_port_reg_be, - .mask_port_reg_le = rtl839x_mask_port_reg_le, - .set_port_reg_le = rtl839x_set_port_reg_le, - .get_port_reg_le = rtl839x_get_port_reg_le, - .stat_port_rst = RTL839X_STAT_PORT_RST, - .stat_rst = RTL839X_STAT_RST, - .stat_port_std_mib = RTL839X_STAT_PORT_STD_MIB, - .traffic_enable = rtl839x_traffic_enable, - .traffic_disable = rtl839x_traffic_disable, - .traffic_get = rtl839x_traffic_get, - .traffic_set = rtl839x_traffic_set, - .port_iso_ctrl = rtl839x_port_iso_ctrl, - .l2_ctrl_0 = RTL839X_L2_CTRL_0, - .l2_ctrl_1 = RTL839X_L2_CTRL_1, - .l2_port_aging_out = RTL839X_L2_PORT_AGING_OUT, - .set_ageing_time = rtl839x_set_ageing_time, - .smi_poll_ctrl = RTL839X_SMI_PORT_POLLING_CTRL, - .l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL, - .exec_tbl0_cmd = rtl839x_exec_tbl0_cmd, - .exec_tbl1_cmd = rtl839x_exec_tbl1_cmd, - .tbl_access_data_0 = rtl839x_tbl_access_data_0, - .isr_glb_src = RTL839X_ISR_GLB_SRC, - .isr_port_link_sts_chg = RTL839X_ISR_PORT_LINK_STS_CHG, - .imr_port_link_sts_chg = RTL839X_IMR_PORT_LINK_STS_CHG, - .imr_glb = RTL839X_IMR_GLB, - .vlan_tables_read = rtl839x_vlan_tables_read, - .vlan_set_tagged = rtl839x_vlan_set_tagged, - .vlan_set_untagged = rtl839x_vlan_set_untagged, - .vlan_profile_dump = rtl839x_vlan_profile_dump, - .vlan_profile_setup = rtl839x_vlan_profile_setup, - .vlan_fwd_on_inner = rtl839x_vlan_fwd_on_inner, - .vlan_port_keep_tag_set = rtl839x_vlan_port_keep_tag_set, - .vlan_port_pvidmode_set = rtl839x_vlan_port_pvidmode_set, - .vlan_port_pvid_set = rtl839x_vlan_port_pvid_set, - .set_vlan_igr_filter = rtl839x_set_igr_filter, - .set_vlan_egr_filter = rtl839x_set_egr_filter, - .enable_learning = rtl839x_enable_learning, - .enable_flood = rtl839x_enable_flood, - .enable_mcast_flood = rtl839x_enable_mcast_flood, - .enable_bcast_flood = rtl839x_enable_bcast_flood, - .set_static_move_action = rtl839x_set_static_move_action, - .stp_get = rtl839x_stp_get, - .stp_set = rtl839x_stp_set, - .mac_force_mode_ctrl = rtl839x_mac_force_mode_ctrl, - .mac_port_ctrl = rtl839x_mac_port_ctrl, - .l2_port_new_salrn = rtl839x_l2_port_new_salrn, - .l2_port_new_sa_fwd = rtl839x_l2_port_new_sa_fwd, - .mir_ctrl = RTL839X_MIR_CTRL, - .mir_dpm = RTL839X_MIR_DPM_CTRL, - .mir_spm = RTL839X_MIR_SPM_CTRL, - .mac_link_sts = RTL839X_MAC_LINK_STS, - .mac_link_dup_sts = RTL839X_MAC_LINK_DUP_STS, - .mac_link_spd_sts = rtl839x_mac_link_spd_sts, - .mac_rx_pause_sts = RTL839X_MAC_RX_PAUSE_STS, - .mac_tx_pause_sts = RTL839X_MAC_TX_PAUSE_STS, - .read_l2_entry_using_hash = rtl839x_read_l2_entry_using_hash, - .write_l2_entry_using_hash = rtl839x_write_l2_entry_using_hash, - .read_cam = rtl839x_read_cam, - .write_cam = rtl839x_write_cam, - .trk_mbr_ctr = rtl839x_trk_mbr_ctr, - .rma_bpdu_fld_pmask = RTL839X_RMA_BPDU_FLD_PMSK, - .spcl_trap_eapol_ctrl = RTL839X_SPCL_TRAP_EAPOL_CTRL, - .init_eee = rtl839x_init_eee, - .port_eee_set = rtl839x_port_eee_set, - .eee_port_ability = rtl839x_eee_port_ability, - .l2_hash_seed = rtl839x_l2_hash_seed, - .l2_hash_key = rtl839x_l2_hash_key, - .read_mcast_pmask = rtl839x_read_mcast_pmask, - .write_mcast_pmask = rtl839x_write_mcast_pmask, - .pie_init = rtl839x_pie_init, - .pie_rule_read = rtl839x_pie_rule_read, - .pie_rule_write = rtl839x_pie_rule_write, - .pie_rule_add = rtl839x_pie_rule_add, - .pie_rule_rm = rtl839x_pie_rule_rm, - .l2_learning_setup = rtl839x_l2_learning_setup, - .packet_cntr_read = rtl839x_packet_cntr_read, - .packet_cntr_clear = rtl839x_packet_cntr_clear, - .route_read = rtl839x_route_read, - .route_write = rtl839x_route_write, - .l3_setup = rtl839x_l3_setup, - .set_distribution_algorithm = rtl839x_set_distribution_algorithm, - .set_receive_management_action = rtl839x_set_receive_management_action, -}; diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl83xx.h b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl83xx.h deleted file mode 100644 index 55a6851d46..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl83xx.h +++ /dev/null @@ -1,136 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef _NET_DSA_RTL83XX_H -#define _NET_DSA_RTL83XX_H - -#include -#include "rtl838x.h" - - -#define RTL8380_VERSION_A 'A' -#define RTL8390_VERSION_A 'A' -#define RTL8380_VERSION_B 'B' - -struct fdb_update_work { - struct work_struct work; - struct net_device *ndev; - u64 macs[]; -}; - -#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name} -struct rtl83xx_mib_desc { - unsigned int size; - unsigned int offset; - const char *name; -}; - -/* API for switch table access */ -struct table_reg { - u16 addr; - u16 data; - u8 max_data; - u8 c_bit; - u8 t_bit; - u8 rmode; - u8 tbl; - struct mutex lock; -}; - -#define TBL_DESC(_addr, _data, _max_data, _c_bit, _t_bit, _rmode) \ - { .addr = _addr, .data = _data, .max_data = _max_data, .c_bit = _c_bit, \ - .t_bit = _t_bit, .rmode = _rmode \ - } - -typedef enum { - RTL8380_TBL_L2 = 0, - RTL8380_TBL_0, - RTL8380_TBL_1, - RTL8390_TBL_L2, - RTL8390_TBL_0, - RTL8390_TBL_1, - RTL8390_TBL_2, - RTL9300_TBL_L2, - RTL9300_TBL_0, - RTL9300_TBL_1, - RTL9300_TBL_2, - RTL9300_TBL_HSB, - RTL9300_TBL_HSA, - RTL9310_TBL_0, - RTL9310_TBL_1, - RTL9310_TBL_2, - RTL9310_TBL_3, - RTL9310_TBL_4, - RTL9310_TBL_5, - RTL_TBL_END -} rtl838x_tbl_reg_t; - -void rtl_table_init(void); -struct table_reg *rtl_table_get(rtl838x_tbl_reg_t r, int t); -void rtl_table_release(struct table_reg *r); -int rtl_table_read(struct table_reg *r, int idx); -int rtl_table_write(struct table_reg *r, int idx); -inline u16 rtl_table_data(struct table_reg *r, int i); -inline u32 rtl_table_data_r(struct table_reg *r, int i); -inline void rtl_table_data_w(struct table_reg *r, u32 v, int i); - -void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv); - -int rtl83xx_packet_cntr_alloc(struct rtl838x_switch_priv *priv); - -int rtl83xx_port_is_under(const struct net_device * dev, struct rtl838x_switch_priv *priv); - -int read_phy(u32 port, u32 page, u32 reg, u32 *val); -int write_phy(u32 port, u32 page, u32 reg, u32 val); - -/* Port register accessor functions for the RTL839x and RTL931X SoCs */ -void rtl839x_mask_port_reg_be(u64 clear, u64 set, int reg); -u64 rtl839x_get_port_reg_be(int reg); -void rtl839x_set_port_reg_be(u64 set, int reg); -void rtl839x_mask_port_reg_le(u64 clear, u64 set, int reg); -void rtl839x_set_port_reg_le(u64 set, int reg); -u64 rtl839x_get_port_reg_le(int reg); - -/* Port register accessor functions for the RTL838x and RTL930X SoCs */ -void rtl838x_mask_port_reg(u64 clear, u64 set, int reg); -void rtl838x_set_port_reg(u64 set, int reg); -u64 rtl838x_get_port_reg(int reg); - -/* RTL838x-specific */ -u32 rtl838x_hash(struct rtl838x_switch_priv *priv, u64 seed); -irqreturn_t rtl838x_switch_irq(int irq, void *dev_id); -void rtl8380_get_version(struct rtl838x_switch_priv *priv); -void rtl838x_vlan_profile_dump(int index); -int rtl83xx_dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg); -void rtl8380_sds_rst(int mac); -int rtl8380_sds_power(int mac, int val); -void rtl838x_print_matrix(void); - -/* RTL839x-specific */ -u32 rtl839x_hash(struct rtl838x_switch_priv *priv, u64 seed); -irqreturn_t rtl839x_switch_irq(int irq, void *dev_id); -void rtl8390_get_version(struct rtl838x_switch_priv *priv); -void rtl839x_vlan_profile_dump(int index); -int rtl83xx_dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val); -void rtl839x_exec_tbl2_cmd(u32 cmd); -void rtl839x_print_matrix(void); - -/* RTL930x-specific */ -u32 rtl930x_hash(struct rtl838x_switch_priv *priv, u64 seed); -irqreturn_t rtl930x_switch_irq(int irq, void *dev_id); -irqreturn_t rtl839x_switch_irq(int irq, void *dev_id); -void rtl930x_vlan_profile_dump(int index); -int rtl9300_sds_power(int mac, int val); -void rtl9300_sds_rst(int sds_num, u32 mode); -int rtl9300_serdes_setup(int port, int sds_num, phy_interface_t phy_mode); -void rtl930x_print_matrix(void); - -/* RTL931x-specific */ -irqreturn_t rtl931x_switch_irq(int irq, void *dev_id); -int rtl931x_sds_cmu_band_get(int sds, phy_interface_t mode); -int rtl931x_sds_cmu_band_set(int sds, bool enable, u32 band, phy_interface_t mode); -void rtl931x_sds_init(u32 sds, phy_interface_t mode); - -int rtl83xx_lag_add(struct dsa_switch *ds, int group, int port, struct netdev_lag_upper_info *info); -int rtl83xx_lag_del(struct dsa_switch *ds, int group, int port); - -#endif /* _NET_DSA_RTL83XX_H */ diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c deleted file mode 100644 index 793d762489..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c +++ /dev/null @@ -1,2568 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include - -#include "rtl83xx.h" - -#define RTL930X_VLAN_PORT_TAG_STS_INTERNAL 0x0 -#define RTL930X_VLAN_PORT_TAG_STS_UNTAG 0x1 -#define RTL930X_VLAN_PORT_TAG_STS_TAGGED 0x2 -#define RTL930X_VLAN_PORT_TAG_STS_PRIORITY_TAGGED 0x3 - -#define RTL930X_VLAN_PORT_TAG_STS_CTRL_BASE 0xCE24 -/* port 0-28 */ -#define RTL930X_VLAN_PORT_TAG_STS_CTRL(port) \ - RTL930X_VLAN_PORT_TAG_STS_CTRL_BASE + (port << 2) -#define RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_OTAG_STS_MASK GENMASK(7,6) -#define RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_ITAG_STS_MASK GENMASK(5,4) -#define RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_P_OTAG_KEEP_MASK GENMASK(3,3) -#define RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_P_ITAG_KEEP_MASK GENMASK(2,2) -#define RTL930X_VLAN_PORT_TAG_STS_CTRL_IGR_P_OTAG_KEEP_MASK GENMASK(1,1) -#define RTL930X_VLAN_PORT_TAG_STS_CTRL_IGR_P_ITAG_KEEP_MASK GENMASK(0,0) - -#define RTL930X_LED_GLB_ACTIVE_LOW BIT(22) - -#define RTL930X_LED_SETX_0_CTRL(x) (RTL930X_LED_SET0_0_CTRL - (x * 8)) -#define RTL930X_LED_SETX_1_CTRL(x) (RTL930X_LED_SETX_0_CTRL(x) - 4) - -/* get register for given set and led in the set */ -#define RTL930X_LED_SETX_LEDY(x,y) (RTL930X_LED_SETX_0_CTRL(x) - 4 * (y / 2)) - -/* get shift for given led in any set */ -#define RTL930X_LED_SET_LEDX_SHIFT(x) (16 * (x % 2)) - -extern struct mutex smi_lock; -extern struct rtl83xx_soc_info soc_info; - -/* Definition of the RTL930X-specific template field IDs as used in the PIE */ -enum template_field_id { - TEMPLATE_FIELD_SPM0 = 0, /* Source portmask ports 0-15 */ - TEMPLATE_FIELD_SPM1 = 1, /* Source portmask ports 16-31 */ - TEMPLATE_FIELD_DMAC0 = 2, /* Destination MAC [15:0] */ - TEMPLATE_FIELD_DMAC1 = 3, /* Destination MAC [31:16] */ - TEMPLATE_FIELD_DMAC2 = 4, /* Destination MAC [47:32] */ - TEMPLATE_FIELD_SMAC0 = 5, /* Source MAC [15:0] */ - TEMPLATE_FIELD_SMAC1 = 6, /* Source MAC [31:16] */ - TEMPLATE_FIELD_SMAC2 = 7, /* Source MAC [47:32] */ - TEMPLATE_FIELD_ETHERTYPE = 8, /* Ethernet frame type field */ - TEMPLATE_FIELD_OTAG = 9, - TEMPLATE_FIELD_ITAG = 10, - TEMPLATE_FIELD_SIP0 = 11, - TEMPLATE_FIELD_SIP1 = 12, - TEMPLATE_FIELD_DIP0 = 13, - TEMPLATE_FIELD_DIP1 = 14, - TEMPLATE_FIELD_IP_TOS_PROTO = 15, - TEMPLATE_FIELD_L4_SPORT = 16, - TEMPLATE_FIELD_L4_DPORT = 17, - TEMPLATE_FIELD_L34_HEADER = 18, - TEMPLATE_FIELD_TCP_INFO = 19, - TEMPLATE_FIELD_FIELD_SELECTOR_VALID = 20, - TEMPLATE_FIELD_FIELD_SELECTOR_0 = 21, - TEMPLATE_FIELD_FIELD_SELECTOR_1 = 22, - TEMPLATE_FIELD_FIELD_SELECTOR_2 = 23, - TEMPLATE_FIELD_FIELD_SELECTOR_3 = 24, - TEMPLATE_FIELD_FIELD_SELECTOR_4 = 25, - TEMPLATE_FIELD_FIELD_SELECTOR_5 = 26, - TEMPLATE_FIELD_SIP2 = 27, - TEMPLATE_FIELD_SIP3 = 28, - TEMPLATE_FIELD_SIP4 = 29, - TEMPLATE_FIELD_SIP5 = 30, - TEMPLATE_FIELD_SIP6 = 31, - TEMPLATE_FIELD_SIP7 = 32, - TEMPLATE_FIELD_DIP2 = 33, - TEMPLATE_FIELD_DIP3 = 34, - TEMPLATE_FIELD_DIP4 = 35, - TEMPLATE_FIELD_DIP5 = 36, - TEMPLATE_FIELD_DIP6 = 37, - TEMPLATE_FIELD_DIP7 = 38, - TEMPLATE_FIELD_PKT_INFO = 39, - TEMPLATE_FIELD_FLOW_LABEL = 40, - TEMPLATE_FIELD_DSAP_SSAP = 41, - TEMPLATE_FIELD_SNAP_OUI = 42, - TEMPLATE_FIELD_FWD_VID = 43, - TEMPLATE_FIELD_RANGE_CHK = 44, - TEMPLATE_FIELD_VLAN_GMSK = 45, /* VLAN Group Mask/IP range check */ - TEMPLATE_FIELD_DLP = 46, - TEMPLATE_FIELD_META_DATA = 47, - TEMPLATE_FIELD_SRC_FWD_VID = 48, - TEMPLATE_FIELD_SLP = 49, -}; - -/* The meaning of TEMPLATE_FIELD_VLAN depends on phase and the configuration in - * RTL930X_PIE_CTRL. We use always the same definition and map to the inner VLAN tag: - */ -#define TEMPLATE_FIELD_VLAN TEMPLATE_FIELD_ITAG - -/* Number of fixed templates predefined in the RTL9300 SoC */ -#define N_FIXED_TEMPLATES 5 -/* RTL9300 specific predefined templates */ -static enum template_field_id fixed_templates[N_FIXED_TEMPLATES][N_FIXED_FIELDS] = -{ - { - TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2, - TEMPLATE_FIELD_SMAC0, TEMPLATE_FIELD_SMAC1, TEMPLATE_FIELD_SMAC2, - TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_DSAP_SSAP, - TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1 - }, { - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, - TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_TCP_INFO, - TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_VLAN, - TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1 - }, { - TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2, - TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_IP_TOS_PROTO, - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, - TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT - }, { - TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_DIP2, - TEMPLATE_FIELD_DIP3, TEMPLATE_FIELD_DIP4, TEMPLATE_FIELD_DIP5, - TEMPLATE_FIELD_DIP6, TEMPLATE_FIELD_DIP7, TEMPLATE_FIELD_IP_TOS_PROTO, - TEMPLATE_FIELD_TCP_INFO, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT - }, { - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_SIP2, - TEMPLATE_FIELD_SIP3, TEMPLATE_FIELD_SIP4, TEMPLATE_FIELD_SIP5, - TEMPLATE_FIELD_SIP6, TEMPLATE_FIELD_SIP7, TEMPLATE_FIELD_VLAN, - TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM1, TEMPLATE_FIELD_SPM1 - }, -}; - -void rtl930x_print_matrix(void) -{ - struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6); - - for (int i = 0; i < 29; i++) { - rtl_table_read(r, i); - pr_debug("> %08x\n", sw_r32(rtl_table_data(r, 0))); - } - rtl_table_release(r); -} - -inline void rtl930x_exec_tbl0_cmd(u32 cmd) -{ - sw_w32(cmd, RTL930X_TBL_ACCESS_CTRL_0); - do { } while (sw_r32(RTL930X_TBL_ACCESS_CTRL_0) & (1 << 17)); -} - -inline void rtl930x_exec_tbl1_cmd(u32 cmd) -{ - sw_w32(cmd, RTL930X_TBL_ACCESS_CTRL_1); - do { } while (sw_r32(RTL930X_TBL_ACCESS_CTRL_1) & (1 << 17)); -} - -inline int rtl930x_tbl_access_data_0(int i) -{ - return RTL930X_TBL_ACCESS_DATA_0(i); -} - -static inline int rtl930x_l2_port_new_salrn(int p) -{ - return RTL930X_L2_PORT_SALRN(p); -} - -static inline int rtl930x_l2_port_new_sa_fwd(int p) -{ - /* TODO: The definition of the fields changed, because of the master-cpu in a stack */ - return RTL930X_L2_PORT_NEW_SA_FWD(p); -} - -inline static int rtl930x_trk_mbr_ctr(int group) -{ - return RTL930X_TRK_MBR_CTRL + (group << 2); -} - -static void rtl930x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 v, w; - /* Read VLAN table (1) via register 0 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 1); - - rtl_table_read(r, vlan); - v = sw_r32(rtl_table_data(r, 0)); - w = sw_r32(rtl_table_data(r, 1)); - pr_debug("VLAN_READ %d: %08x %08x\n", vlan, v, w); - rtl_table_release(r); - - info->tagged_ports = v >> 3; - info->profile_id = (w >> 24) & 7; - info->hash_mc_fid = !!(w & BIT(27)); - info->hash_uc_fid = !!(w & BIT(28)); - info->fid = ((v & 0x7) << 3) | ((w >> 29) & 0x7); - - /* Read UNTAG table via table register 2 */ - r = rtl_table_get(RTL9300_TBL_2, 0); - rtl_table_read(r, vlan); - v = sw_r32(rtl_table_data(r, 0)); - rtl_table_release(r); - - info->untagged_ports = v >> 3; -} - -static void rtl930x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 v, w; - /* Access VLAN table (1) via register 0 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 1); - - v = info->tagged_ports << 3; - v |= ((u32)info->fid) >> 3; - - w = ((u32)info->fid) << 29; - w |= info->hash_mc_fid ? BIT(27) : 0; - w |= info->hash_uc_fid ? BIT(28) : 0; - w |= info->profile_id << 24; - - sw_w32(v, rtl_table_data(r, 0)); - sw_w32(w, rtl_table_data(r, 1)); - - rtl_table_write(r, vlan); - rtl_table_release(r); -} - -void rtl930x_vlan_profile_dump(int profile) -{ - u32 p[5]; - - if (profile < 0 || profile > 7) - return; - - p[0] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile)); - p[1] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 4); - p[2] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 8) & 0x1FFFFFFF; - p[3] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 12) & 0x1FFFFFFF; - p[4] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 16) & 0x1FFFFFFF; - - pr_info("VLAN %d: L2 learn: %d; Unknown MC PMasks: L2 %0x, IPv4 %0x, IPv6: %0x", - profile, p[0] & (3 << 21), p[2], p[3], p[4]); - pr_info(" Routing enabled: IPv4 UC %c, IPv6 UC %c, IPv4 MC %c, IPv6 MC %c\n", - p[0] & BIT(17) ? 'y' : 'n', p[0] & BIT(16) ? 'y' : 'n', - p[0] & BIT(13) ? 'y' : 'n', p[0] & BIT(12) ? 'y' : 'n'); - pr_info(" Bridge enabled: IPv4 MC %c, IPv6 MC %c,\n", - p[0] & BIT(15) ? 'y' : 'n', p[0] & BIT(14) ? 'y' : 'n'); - pr_info("VLAN profile %d: raw %08x %08x %08x %08x %08x\n", - profile, p[0], p[1], p[2], p[3], p[4]); -} - -static void rtl930x_vlan_set_untagged(u32 vlan, u64 portmask) -{ - struct table_reg *r = rtl_table_get(RTL9300_TBL_2, 0); - - sw_w32(portmask << 3, rtl_table_data(r, 0)); - rtl_table_write(r, vlan); - rtl_table_release(r); -} - -/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer */ -static void rtl930x_vlan_fwd_on_inner(int port, bool is_set) -{ - /* Always set all tag modes to fwd based on either inner or outer tag */ - if (is_set) - sw_w32_mask(0xf, 0, RTL930X_VLAN_PORT_FWD + (port << 2)); - else - sw_w32_mask(0, 0xf, RTL930X_VLAN_PORT_FWD + (port << 2)); -} - -static void rtl930x_vlan_profile_setup(int profile) -{ - u32 p[5]; - - pr_info("In %s\n", __func__); - p[0] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile)); - p[1] = sw_r32(RTL930X_VLAN_PROFILE_SET(profile) + 4); - - /* Enable routing of Ipv4/6 Unicast and IPv4/6 Multicast traffic */ - p[0] |= BIT(17) | BIT(16) | BIT(13) | BIT(12); - p[2] = 0x1fffffff; /* L2 unknown MC flooding portmask all ports, including the CPU-port */ - p[3] = 0x1fffffff; /* IPv4 unknown MC flooding portmask */ - p[4] = 0x1fffffff; /* IPv6 unknown MC flooding portmask */ - - sw_w32(p[0], RTL930X_VLAN_PROFILE_SET(profile)); - sw_w32(p[1], RTL930X_VLAN_PROFILE_SET(profile) + 4); - sw_w32(p[2], RTL930X_VLAN_PROFILE_SET(profile) + 8); - sw_w32(p[3], RTL930X_VLAN_PROFILE_SET(profile) + 12); - sw_w32(p[4], RTL930X_VLAN_PROFILE_SET(profile) + 16); -} - -static void rtl930x_l2_learning_setup(void) -{ - /* Portmask for flooding broadcast traffic */ - sw_w32(0x1fffffff, RTL930X_L2_BC_FLD_PMSK); - - /* Portmask for flooding unicast traffic with unknown destination */ - sw_w32(0x1fffffff, RTL930X_L2_UNKN_UC_FLD_PMSK); - - /* Limit learning to maximum: 32k entries, after that just flood (bits 0-1) */ - sw_w32((0x7fff << 2) | 0, RTL930X_L2_LRN_CONSTRT_CTRL); -} - -static void rtl930x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) -{ - u32 cmd = 1 << 17 | /* Execute cmd */ - 0 << 16 | /* Read */ - 4 << 12 | /* Table type 0b10 */ - (msti & 0xfff); - priv->r->exec_tbl0_cmd(cmd); - - for (int i = 0; i < 2; i++) - port_state[i] = sw_r32(RTL930X_TBL_ACCESS_DATA_0(i)); - pr_debug("MSTI: %d STATE: %08x, %08x\n", msti, port_state[0], port_state[1]); -} - -static void rtl930x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) -{ - u32 cmd = 1 << 17 | /* Execute cmd */ - 1 << 16 | /* Write */ - 4 << 12 | /* Table type 4 */ - (msti & 0xfff); - - for (int i = 0; i < 2; i++) - sw_w32(port_state[i], RTL930X_TBL_ACCESS_DATA_0(i)); - priv->r->exec_tbl0_cmd(cmd); -} - -static inline int rtl930x_mac_force_mode_ctrl(int p) -{ - return RTL930X_MAC_FORCE_MODE_CTRL + (p << 2); -} - -static inline int rtl930x_mac_port_ctrl(int p) -{ - return RTL930X_MAC_L2_PORT_CTRL(p); -} - -static inline int rtl930x_mac_link_spd_sts(int p) -{ - return RTL930X_MAC_LINK_SPD_STS(p); -} - -static u64 rtl930x_l2_hash_seed(u64 mac, u32 vid) -{ - u64 v = vid; - - v <<= 48; - v |= mac; - - return v; -} - -/* Calculate both the block 0 and the block 1 hash by applyingthe same hash - * algorithm as the one used currently by the ASIC to the seed, and return - * both hashes in the lower and higher word of the return value since only 12 bit of - * the hash are significant - */ -static u32 rtl930x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) -{ - u32 k0, k1, h1, h2, h; - - k0 = (u32) (((seed >> 55) & 0x1f) ^ - ((seed >> 44) & 0x7ff) ^ - ((seed >> 33) & 0x7ff) ^ - ((seed >> 22) & 0x7ff) ^ - ((seed >> 11) & 0x7ff) ^ - (seed & 0x7ff)); - - h1 = (seed >> 11) & 0x7ff; - h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f); - - h2 = (seed >> 33) & 0x7ff; - h2 = ((h2 & 0x3f) << 5)| ((h2 >> 6) & 0x3f); - - k1 = (u32) (((seed << 55) & 0x1f) ^ - ((seed >> 44) & 0x7ff) ^ - h2 ^ - ((seed >> 22) & 0x7ff) ^ - h1 ^ - (seed & 0x7ff)); - - /* Algorithm choice for block 0 */ - if (sw_r32(RTL930X_L2_CTRL) & BIT(0)) - h = k1; - else - h = k0; - - /* Algorithm choice for block 1 - * Since k0 and k1 are < 2048, adding 2048 will offset the hash into the second - * half of hash-space - * 2048 is in fact the hash-table size 16384 divided by 4 hashes per bucket - * divided by 2 to divide the hash space in 2 - */ - if (sw_r32(RTL930X_L2_CTRL) & BIT(1)) - h |= (k1 + 2048) << 16; - else - h |= (k0 + 2048) << 16; - - return h; -} - -/* Fills an L2 entry structure from the SoC registers */ -static void rtl930x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) -{ - pr_debug("In %s valid?\n", __func__); - e->valid = !!(r[2] & BIT(31)); - if (!e->valid) - return; - - pr_debug("In %s is valid\n", __func__); - e->is_ip_mc = false; - e->is_ipv6_mc = false; - - /* TODO: Is there not a function to copy directly MAC memory? */ - e->mac[0] = (r[0] >> 24); - e->mac[1] = (r[0] >> 16); - e->mac[2] = (r[0] >> 8); - e->mac[3] = r[0]; - e->mac[4] = (r[1] >> 24); - e->mac[5] = (r[1] >> 16); - - e->next_hop = !!(r[2] & BIT(12)); - e->rvid = r[1] & 0xfff; - - /* Is it a unicast entry? check multicast bit */ - if (!(e->mac[0] & 1)) { - e->type = L2_UNICAST; - e->is_static = !!(r[2] & BIT(14)); - e->port = (r[2] >> 20) & 0x3ff; - /* Check for trunk port */ - if (r[2] & BIT(30)) { - e->is_trunk = true; - e->stack_dev = (e->port >> 9) & 1; - e->trunk = e->port & 0x3f; - } else { - e->is_trunk = false; - e->stack_dev = (e->port >> 6) & 0xf; - e->port = e->port & 0x3f; - } - - e->block_da = !!(r[2] & BIT(15)); - e->block_sa = !!(r[2] & BIT(16)); - e->suspended = !!(r[2] & BIT(13)); - e->age = (r[2] >> 17) & 3; - e->valid = true; - /* the UC_VID field in hardware is used for the VID or for the route id */ - if (e->next_hop) { - e->nh_route_id = r[2] & 0x7ff; - e->vid = 0; - } else { - e->vid = r[2] & 0xfff; - e->nh_route_id = 0; - } - } else { - e->valid = true; - e->type = L2_MULTICAST; - e->mc_portmask_index = (r[2] >> 16) & 0x3ff; - } -} - -/* Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry */ -static void rtl930x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) -{ - u32 port; - - if (!e->valid) { - r[0] = r[1] = r[2] = 0; - return; - } - - r[2] = BIT(31); /* Set valid bit */ - - r[0] = ((u32)e->mac[0]) << 24 | - ((u32)e->mac[1]) << 16 | - ((u32)e->mac[2]) << 8 | - ((u32)e->mac[3]); - r[1] = ((u32)e->mac[4]) << 24 | - ((u32)e->mac[5]) << 16; - - r[2] |= e->next_hop ? BIT(12) : 0; - - if (e->type == L2_UNICAST) { - r[2] |= e->is_static ? BIT(14) : 0; - r[1] |= e->rvid & 0xfff; - r[2] |= (e->port & 0x3ff) << 20; - if (e->is_trunk) { - r[2] |= BIT(30); - port = e->stack_dev << 9 | (e->port & 0x3f); - } else { - port = (e->stack_dev & 0xf) << 6; - port |= e->port & 0x3f; - } - r[2] |= port << 20; - r[2] |= e->block_da ? BIT(15) : 0; - r[2] |= e->block_sa ? BIT(17) : 0; - r[2] |= e->suspended ? BIT(13) : 0; - r[2] |= (e->age & 0x3) << 17; - /* the UC_VID field in hardware is used for the VID or for the route id */ - if (e->next_hop) - r[2] |= e->nh_route_id & 0x7ff; - else - r[2] |= e->vid & 0xfff; - } else { /* L2_MULTICAST */ - r[2] |= (e->mc_portmask_index & 0x3ff) << 16; - r[2] |= e->mc_mac_index & 0x7ff; - } -} - -/* Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table - * hash is the id of the bucket and pos is the position of the entry in that bucket - * The data read from the SoC is filled into rtl838x_l2_entry - */ -static u64 rtl930x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 0); - u32 idx; - u64 mac; - u64 seed; - - pr_debug("%s: hash %08x, pos: %d\n", __func__, hash, pos); - - /* On the RTL93xx, 2 different hash algorithms are used making it a - * total of 8 buckets that need to be searched, 4 for each hash-half - * Use second hash space when bucket is between 4 and 8 - */ - if (pos >= 4) { - pos -= 4; - hash >>= 16; - } else { - hash &= 0xffff; - } - - idx = (0 << 14) | (hash << 2) | pos; /* Search SRAM, with hash and at pos in bucket */ - pr_debug("%s: NOW hash %08x, pos: %d\n", __func__, hash, pos); - - rtl_table_read(q, idx); - for (int i = 0; i < 3; i++) - r[i] = sw_r32(rtl_table_data(q, i)); - - rtl_table_release(q); - - rtl930x_fill_l2_entry(r, e); - - pr_debug("%s: valid: %d, nh: %d\n", __func__, e->valid, e->next_hop); - if (!e->valid) - return 0; - - mac = ((u64)e->mac[0]) << 40 | - ((u64)e->mac[1]) << 32 | - ((u64)e->mac[2]) << 24 | - ((u64)e->mac[3]) << 16 | - ((u64)e->mac[4]) << 8 | - ((u64)e->mac[5]); - - seed = rtl930x_l2_hash_seed(mac, e->rvid); - pr_debug("%s: mac %016llx, seed %016llx\n", __func__, mac, seed); - - /* return vid with concatenated mac as unique id */ - return seed; -} - -static void rtl930x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 0); - u32 idx = (0 << 14) | (hash << 2) | pos; /* Access SRAM, with hash and at pos in bucket */ - - pr_debug("%s: hash %d, pos %d\n", __func__, hash, pos); - pr_debug("%s: index %d -> mac %02x:%02x:%02x:%02x:%02x:%02x\n", __func__, idx, - e->mac[0], e->mac[1], e->mac[2], e->mac[3],e->mac[4],e->mac[5]); - - rtl930x_fill_l2_row(r, e); - - for (int i = 0; i < 3; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); -} - -static u64 rtl930x_read_cam(int idx, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 1); - - rtl_table_read(q, idx); - for (int i = 0; i < 3; i++) - r[i] = sw_r32(rtl_table_data(q, i)); - - rtl_table_release(q); - - rtl930x_fill_l2_entry(r, e); - if (!e->valid) - return 0; - - /* return mac with concatenated vid as unique id */ - return ((u64)r[0] << 28) | ((r[1] & 0xffff0000) >> 4) | e->vid; -} - -static void rtl930x_write_cam(int idx, struct rtl838x_l2_entry *e) -{ - u32 r[3]; - struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 1); /* Access L2 Table 1 */ - - rtl930x_fill_l2_row(r, e); - - for (int i = 0; i < 3; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); -} - -static u64 rtl930x_read_mcast_pmask(int idx) -{ - u32 portmask; - /* Read MC_PORTMASK (2) via register RTL9300_TBL_L2 */ - struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 2); - - rtl_table_read(q, idx); - portmask = sw_r32(rtl_table_data(q, 0)); - portmask >>= 3; - rtl_table_release(q); - - pr_debug("%s: Index idx %d has portmask %08x\n", __func__, idx, portmask); - - return portmask; -} - -static void rtl930x_write_mcast_pmask(int idx, u64 portmask) -{ - u32 pm = portmask; - - /* Access MC_PORTMASK (2) via register RTL9300_TBL_L2 */ - struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 2); - - pr_debug("%s: Index idx %d has portmask %08x\n", __func__, idx, pm); - pm <<= 3; - sw_w32(pm, rtl_table_data(q, 0)); - rtl_table_write(q, idx); - rtl_table_release(q); -} - -u64 rtl930x_traffic_get(int source) -{ - u32 v; - struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6); - - rtl_table_read(r, source); - v = sw_r32(rtl_table_data(r, 0)); - rtl_table_release(r); - v = v >> 3; - - return v; -} - -/* Enable traffic between a source port and a destination port matrix */ -void rtl930x_traffic_set(int source, u64 dest_matrix) -{ - struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6); - - sw_w32((dest_matrix << 3), rtl_table_data(r, 0)); - rtl_table_write(r, source); - rtl_table_release(r); -} - -void rtl930x_traffic_enable(int source, int dest) -{ - struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6); - rtl_table_read(r, source); - sw_w32_mask(0, BIT(dest + 3), rtl_table_data(r, 0)); - rtl_table_write(r, source); - rtl_table_release(r); -} - -void rtl930x_traffic_disable(int source, int dest) -{ - struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6); - rtl_table_read(r, source); - sw_w32_mask(BIT(dest + 3), 0, rtl_table_data(r, 0)); - rtl_table_write(r, source); - rtl_table_release(r); -} - -void rtl9300_dump_debug(void) -{ - u16 r = RTL930X_STAT_PRVTE_DROP_COUNTER0; - - for (int i = 0; i < 10; i ++) { - pr_info("# %d %08x %08x %08x %08x %08x %08x %08x %08x\n", i * 8, - sw_r32(r), sw_r32(r + 4), sw_r32(r + 8), sw_r32(r + 12), - sw_r32(r + 16), sw_r32(r + 20), sw_r32(r + 24), sw_r32(r + 28)); - r += 32; - } - pr_info("# %08x %08x %08x %08x %08x\n", - sw_r32(r), sw_r32(r + 4), sw_r32(r + 8), sw_r32(r + 12), sw_r32(r + 16)); - rtl930x_print_matrix(); - pr_info("RTL930X_L2_PORT_SABLK_CTRL: %08x, RTL930X_L2_PORT_DABLK_CTRL %08x\n", - sw_r32(RTL930X_L2_PORT_SABLK_CTRL), sw_r32(RTL930X_L2_PORT_DABLK_CTRL) - - ); -} - -irqreturn_t rtl930x_switch_irq(int irq, void *dev_id) -{ - struct dsa_switch *ds = dev_id; - u32 ports = sw_r32(RTL930X_ISR_PORT_LINK_STS_CHG); - u32 link; - - /* Clear status */ - sw_w32(ports, RTL930X_ISR_PORT_LINK_STS_CHG); - - for (int i = 0; i < 28; i++) { - if (ports & BIT(i)) { - /* Read the register twice because of issues with latency at least - * with the external RTL8226 PHY on the XGS1210 - */ - link = sw_r32(RTL930X_MAC_LINK_STS); - link = sw_r32(RTL930X_MAC_LINK_STS); - if (link & BIT(i)) - dsa_port_phylink_mac_change(ds, i, true); - else - dsa_port_phylink_mac_change(ds, i, false); - } - } - - return IRQ_HANDLED; -} - -int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val) -{ - u32 v; - int err = 0; - - pr_debug("%s: port %d, page: %d, reg: %x, val: %x\n", __func__, port, page, reg, val); - - if (port > 63 || page > 4095 || reg > 31) - return -ENOTSUPP; - - val &= 0xffff; - mutex_lock(&smi_lock); - - sw_w32(BIT(port), RTL930X_SMI_ACCESS_PHY_CTRL_0); - sw_w32_mask(0xffff << 16, val << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2); - v = reg << 20 | page << 3 | 0x1f << 15 | BIT(2) | BIT(0); - sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1); - - do { - v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1); - } while (v & 0x1); - - if (v & 0x2) - err = -EIO; - - mutex_unlock(&smi_lock); - - return err; -} - -int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val) -{ - u32 v; - int err = 0; - - if (port > 63 || page > 4095 || reg > 31) - return -ENOTSUPP; - - mutex_lock(&smi_lock); - - sw_w32_mask(0xffff << 16, port << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2); - v = reg << 20 | page << 3 | 0x1f << 15 | 1; - sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1); - - do { - v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1); - } while ( v & 0x1); - - if (v & BIT(25)) { - pr_debug("Error reading phy %d, register %d\n", port, reg); - err = -EIO; - } - *val = (sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_2) & 0xffff); - - pr_debug("%s: port %d, page: %d, reg: %x, val: %x\n", __func__, port, page, reg, *val); - - mutex_unlock(&smi_lock); - - return err; -} - -/* Write to an mmd register of the PHY */ -int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val) -{ - int err = 0; - u32 v; - - mutex_lock(&smi_lock); - - /* Set PHY to access */ - sw_w32(BIT(port), RTL930X_SMI_ACCESS_PHY_CTRL_0); - - /* Set data to write */ - sw_w32_mask(0xffff << 16, val << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2); - - /* Set MMD device number and register to write to */ - sw_w32(devnum << 16 | (regnum & 0xffff), RTL930X_SMI_ACCESS_PHY_CTRL_3); - - v = BIT(2) | BIT(1) | BIT(0); /* WRITE | MMD-access | EXEC */ - sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1); - - do { - v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1); - } while (v & BIT(0)); - - pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, val, err); - mutex_unlock(&smi_lock); - return err; -} - -/* Read an mmd register of the PHY */ -int rtl930x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val) -{ - int err = 0; - u32 v; - - mutex_lock(&smi_lock); - - /* Set PHY to access */ - sw_w32_mask(0xffff << 16, port << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2); - - /* Set MMD device number and register to write to */ - sw_w32(devnum << 16 | (regnum & 0xffff), RTL930X_SMI_ACCESS_PHY_CTRL_3); - - v = BIT(1) | BIT(0); /* MMD-access | EXEC */ - sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1); - - do { - v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1); - } while (v & BIT(0)); - /* There is no error-checking via BIT 25 of v, as it does not seem to be set correctly */ - *val = (sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_2) & 0xffff); - pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, *val, err); - - mutex_unlock(&smi_lock); - - return err; -} - -/* Calculate both the block 0 and the block 1 hash, and return in - * lower and higher word of the return value since only 12 bit of - * the hash are significant - */ -u32 rtl930x_hash(struct rtl838x_switch_priv *priv, u64 seed) -{ - u32 k0, k1, h1, h2, h; - - k0 = (u32) (((seed >> 55) & 0x1f) ^ - ((seed >> 44) & 0x7ff) ^ - ((seed >> 33) & 0x7ff) ^ - ((seed >> 22) & 0x7ff) ^ - ((seed >> 11) & 0x7ff) ^ - (seed & 0x7ff)); - - h1 = (seed >> 11) & 0x7ff; - h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f); - - h2 = (seed >> 33) & 0x7ff; - h2 = ((h2 & 0x3f) << 5) | ((h2 >> 6) & 0x3f); - - k1 = (u32) (((seed << 55) & 0x1f) ^ - ((seed >> 44) & 0x7ff) ^ - h2 ^ - ((seed >> 22) & 0x7ff) ^ - h1 ^ - (seed & 0x7ff)); - - /* Algorithm choice for block 0 */ - if (sw_r32(RTL930X_L2_CTRL) & BIT(0)) - h = k1; - else - h = k0; - - /* Algorithm choice for block 1 - * Since k0 and k1 are < 2048, adding 2048 will offset the hash into the second - * half of hash-space - * 2048 is in fact the hash-table size 16384 divided by 4 hashes per bucket - * divided by 2 to divide the hash space in 2 - */ - if (sw_r32(RTL930X_L2_CTRL) & BIT(1)) - h |= (k1 + 2048) << 16; - else - h |= (k0 + 2048) << 16; - - return h; -} - -/* Enables or disables the EEE/EEEP capability of a port */ -void rtl930x_port_eee_set(struct rtl838x_switch_priv *priv, int port, bool enable) -{ - u32 v; - - /* This works only for Ethernet ports, and on the RTL930X, ports from 26 are SFP */ - if (port >= 26) - return; - - pr_debug("In %s: setting port %d to %d\n", __func__, port, enable); - v = enable ? 0x3f : 0x0; - - /* Set EEE/EEEP state for 100, 500, 1000MBit and 2.5, 5 and 10GBit */ - sw_w32_mask(0, v << 10, rtl930x_mac_force_mode_ctrl(port)); - - /* Set TX/RX EEE state */ - v = enable ? 0x3 : 0x0; - sw_w32(v, RTL930X_EEE_CTRL(port)); - - priv->ports[port].eee_enabled = enable; -} - -/* Get EEE own capabilities and negotiation result */ -int rtl930x_eee_port_ability(struct rtl838x_switch_priv *priv, struct ethtool_eee *e, int port) -{ - u32 link, a; - - if (port >= 26) - return -ENOTSUPP; - - pr_info("In %s, port %d\n", __func__, port); - link = sw_r32(RTL930X_MAC_LINK_STS); - link = sw_r32(RTL930X_MAC_LINK_STS); - if (!(link & BIT(port))) - return 0; - - pr_info("Setting advertised\n"); - if (sw_r32(rtl930x_mac_force_mode_ctrl(port)) & BIT(10)) - e->advertised |= ADVERTISED_100baseT_Full; - - if (sw_r32(rtl930x_mac_force_mode_ctrl(port)) & BIT(12)) - e->advertised |= ADVERTISED_1000baseT_Full; - - if (priv->ports[port].is2G5 && sw_r32(rtl930x_mac_force_mode_ctrl(port)) & BIT(13)) { - pr_info("ADVERTISING 2.5G EEE\n"); - e->advertised |= ADVERTISED_2500baseX_Full; - } - - if (priv->ports[port].is10G && sw_r32(rtl930x_mac_force_mode_ctrl(port)) & BIT(15)) - e->advertised |= ADVERTISED_10000baseT_Full; - - a = sw_r32(RTL930X_MAC_EEE_ABLTY); - a = sw_r32(RTL930X_MAC_EEE_ABLTY); - pr_info("Link partner: %08x\n", a); - if (a & BIT(port)) { - e->lp_advertised = ADVERTISED_100baseT_Full; - e->lp_advertised |= ADVERTISED_1000baseT_Full; - if (priv->ports[port].is2G5) - e->lp_advertised |= ADVERTISED_2500baseX_Full; - if (priv->ports[port].is10G) - e->lp_advertised |= ADVERTISED_10000baseT_Full; - } - - /* Read 2x to clear latched state */ - a = sw_r32(RTL930X_EEEP_PORT_CTRL(port)); - a = sw_r32(RTL930X_EEEP_PORT_CTRL(port)); - pr_info("%s RTL930X_EEEP_PORT_CTRL: %08x\n", __func__, a); - - return 0; -} - -static void rtl930x_init_eee(struct rtl838x_switch_priv *priv, bool enable) -{ - pr_info("Setting up EEE, state: %d\n", enable); - - /* Setup EEE on all ports */ - for (int i = 0; i < priv->cpu_port; i++) { - if (priv->ports[i].phy) - rtl930x_port_eee_set(priv, i, enable); - } - - priv->eee_enabled = enable; -} -#define HASH_PICK(val, lsb, len) ((val & (((1 << len) - 1) << lsb)) >> lsb) - -static u32 rtl930x_l3_hash4(u32 ip, int algorithm, bool move_dip) -{ - u32 rows[4]; - u32 hash; - u32 s0, s1, pH; - - memset(rows, 0, sizeof(rows)); - - rows[0] = HASH_PICK(ip, 27, 5); - rows[1] = HASH_PICK(ip, 18, 9); - rows[2] = HASH_PICK(ip, 9, 9); - - if (!move_dip) - rows[3] = HASH_PICK(ip, 0, 9); - - if (!algorithm) { - hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3]; - } else { - s0 = rows[0] + rows[1] + rows[2]; - s1 = (s0 & 0x1ff) + ((s0 & (0x1ff << 9)) >> 9); - pH = (s1 & 0x1ff) + ((s1 & (0x1ff << 9)) >> 9); - hash = pH ^ rows[3]; - } - return hash; -} - -// Currently not used -// static u32 rtl930x_l3_hash6(struct in6_addr *ip6, int algorithm, bool move_dip) -// { -// u32 rows[16]; -// u32 hash; -// u32 s0, s1, pH; - -// rows[0] = (HASH_PICK(ip6->s6_addr[0], 6, 2) << 0); -// rows[1] = (HASH_PICK(ip6->s6_addr[0], 0, 6) << 3) | HASH_PICK(ip6->s6_addr[1], 5, 3); -// rows[2] = (HASH_PICK(ip6->s6_addr[1], 0, 5) << 4) | HASH_PICK(ip6->s6_addr[2], 4, 4); -// rows[3] = (HASH_PICK(ip6->s6_addr[2], 0, 4) << 5) | HASH_PICK(ip6->s6_addr[3], 3, 5); -// rows[4] = (HASH_PICK(ip6->s6_addr[3], 0, 3) << 6) | HASH_PICK(ip6->s6_addr[4], 2, 6); -// rows[5] = (HASH_PICK(ip6->s6_addr[4], 0, 2) << 7) | HASH_PICK(ip6->s6_addr[5], 1, 7); -// rows[6] = (HASH_PICK(ip6->s6_addr[5], 0, 1) << 8) | HASH_PICK(ip6->s6_addr[6], 0, 8); -// rows[7] = (HASH_PICK(ip6->s6_addr[7], 0, 8) << 1) | HASH_PICK(ip6->s6_addr[8], 7, 1); -// rows[8] = (HASH_PICK(ip6->s6_addr[8], 0, 7) << 2) | HASH_PICK(ip6->s6_addr[9], 6, 2); -// rows[9] = (HASH_PICK(ip6->s6_addr[9], 0, 6) << 3) | HASH_PICK(ip6->s6_addr[10], 5, 3); -// rows[10] = (HASH_PICK(ip6->s6_addr[10], 0, 5) << 4) | HASH_PICK(ip6->s6_addr[11], 4, 4); -// if (!algorithm) { -// rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5) | -// (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0); -// rows[12] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) | -// (HASH_PICK(ip6->s6_addr[13], 2, 6) << 0); -// rows[13] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) | -// (HASH_PICK(ip6->s6_addr[14], 1, 7) << 0); -// if (!move_dip) { -// rows[14] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) | -// (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); -// } -// hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ -// rows[5] ^ rows[6] ^ rows[7] ^ rows[8] ^ rows[9] ^ -// rows[10] ^ rows[11] ^ rows[12] ^ rows[13] ^ rows[14]; -// } else { -// rows[11] = (HASH_PICK(ip6->s6_addr[11], 0, 4) << 5); -// rows[12] = (HASH_PICK(ip6->s6_addr[12], 3, 5) << 0); -// rows[13] = (HASH_PICK(ip6->s6_addr[12], 0, 3) << 6) | -// HASH_PICK(ip6->s6_addr[13], 2, 6); -// rows[14] = (HASH_PICK(ip6->s6_addr[13], 0, 2) << 7) | -// HASH_PICK(ip6->s6_addr[14], 1, 7); -// if (!move_dip) { -// rows[15] = (HASH_PICK(ip6->s6_addr[14], 0, 1) << 8) | -// (HASH_PICK(ip6->s6_addr[15], 0, 8) << 0); -// } -// s0 = rows[12] + rows[13] + rows[14]; -// s1 = (s0 & 0x1ff) + ((s0 & (0x1ff << 9)) >> 9); -// pH = (s1 & 0x1ff) + ((s1 & (0x1ff << 9)) >> 9); -// hash = rows[0] ^ rows[1] ^ rows[2] ^ rows[3] ^ rows[4] ^ -// rows[5] ^ rows[6] ^ rows[7] ^ rows[8] ^ rows[9] ^ -// rows[10] ^ rows[11] ^ pH ^ rows[15]; -// } -// return hash; -// } - -/* Read a prefix route entry from the L3_PREFIX_ROUTE_IPUC table - * We currently only support IPv4 and IPv6 unicast route - */ -static void rtl930x_route_read(int idx, struct rtl83xx_route *rt) -{ - u32 v, ip4_m; - bool host_route, default_route; - struct in6_addr ip6_m; - - /* Read L3_PREFIX_ROUTE_IPUC table (2) via register RTL9300_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 2); - - rtl_table_read(r, idx); - /* The table has a size of 11 registers */ - rt->attr.valid = !!(sw_r32(rtl_table_data(r, 0)) & BIT(31)); - if (!rt->attr.valid) - goto out; - - rt->attr.type = (sw_r32(rtl_table_data(r, 0)) >> 29) & 0x3; - - v = sw_r32(rtl_table_data(r, 10)); - host_route = !!(v & BIT(21)); - default_route = !!(v & BIT(20)); - rt->prefix_len = -1; - pr_info("%s: host route %d, default_route %d\n", __func__, host_route, default_route); - - switch (rt->attr.type) { - case 0: /* IPv4 Unicast route */ - rt->dst_ip = sw_r32(rtl_table_data(r, 4)); - ip4_m = sw_r32(rtl_table_data(r, 9)); - pr_info("%s: Read ip4 mask: %08x\n", __func__, ip4_m); - rt->prefix_len = host_route ? 32 : -1; - rt->prefix_len = (rt->prefix_len < 0 && default_route) ? 0 : -1; - if (rt->prefix_len < 0) - rt->prefix_len = inet_mask_len(ip4_m); - break; - case 2: /* IPv6 Unicast route */ - ipv6_addr_set(&rt->dst_ip6, - sw_r32(rtl_table_data(r, 1)), sw_r32(rtl_table_data(r, 2)), - sw_r32(rtl_table_data(r, 3)), sw_r32(rtl_table_data(r, 4))); - ipv6_addr_set(&ip6_m, - sw_r32(rtl_table_data(r, 6)), sw_r32(rtl_table_data(r, 7)), - sw_r32(rtl_table_data(r, 8)), sw_r32(rtl_table_data(r, 9))); - rt->prefix_len = host_route ? 128 : 0; - rt->prefix_len = (rt->prefix_len < 0 && default_route) ? 0 : -1; - if (rt->prefix_len < 0) - rt->prefix_len = find_last_bit((unsigned long int *)&ip6_m.s6_addr32, - 128); - break; - case 1: /* IPv4 Multicast route */ - case 3: /* IPv6 Multicast route */ - pr_warn("%s: route type not supported\n", __func__); - goto out; - } - - rt->attr.hit = !!(v & BIT(22)); - rt->attr.action = (v >> 18) & 3; - rt->nh.id = (v >> 7) & 0x7ff; - rt->attr.ttl_dec = !!(v & BIT(6)); - rt->attr.ttl_check = !!(v & BIT(5)); - rt->attr.dst_null = !!(v & BIT(4)); - rt->attr.qos_as = !!(v & BIT(3)); - rt->attr.qos_prio = v & 0x7; - pr_info("%s: index %d is valid: %d\n", __func__, idx, rt->attr.valid); - pr_info("%s: next_hop: %d, hit: %d, action :%d, ttl_dec %d, ttl_check %d, dst_null %d\n", - __func__, rt->nh.id, rt->attr.hit, rt->attr.action, - rt->attr.ttl_dec, rt->attr.ttl_check, rt->attr.dst_null); - pr_info("%s: GW: %pI4, prefix_len: %d\n", __func__, &rt->dst_ip, rt->prefix_len); -out: - rtl_table_release(r); -} - -static void rtl930x_net6_mask(int prefix_len, struct in6_addr *ip6_m) -{ - int o, b; - /* Define network mask */ - o = prefix_len >> 3; - b = prefix_len & 0x7; - memset(ip6_m->s6_addr, 0xff, o); - ip6_m->s6_addr[o] |= b ? 0xff00 >> b : 0x00; -} - -/* Read a host route entry from the table using its index - * We currently only support IPv4 and IPv6 unicast route - */ -static void rtl930x_host_route_read(int idx, struct rtl83xx_route *rt) -{ - u32 v; - /* Read L3_HOST_ROUTE_IPUC table (1) via register RTL9300_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 1); - - idx = ((idx / 6) * 8) + (idx % 6); - - pr_debug("In %s, physical index %d\n", __func__, idx); - rtl_table_read(r, idx); - /* The table has a size of 5 (for UC, 11 for MC) registers */ - v = sw_r32(rtl_table_data(r, 0)); - rt->attr.valid = !!(v & BIT(31)); - if (!rt->attr.valid) - goto out; - rt->attr.type = (v >> 29) & 0x3; - switch (rt->attr.type) { - case 0: /* IPv4 Unicast route */ - rt->dst_ip = sw_r32(rtl_table_data(r, 4)); - break; - case 2: /* IPv6 Unicast route */ - ipv6_addr_set(&rt->dst_ip6, - sw_r32(rtl_table_data(r, 3)), sw_r32(rtl_table_data(r, 2)), - sw_r32(rtl_table_data(r, 1)), sw_r32(rtl_table_data(r, 0))); - break; - case 1: /* IPv4 Multicast route */ - case 3: /* IPv6 Multicast route */ - pr_warn("%s: route type not supported\n", __func__); - goto out; - } - - rt->attr.hit = !!(v & BIT(20)); - rt->attr.dst_null = !!(v & BIT(19)); - rt->attr.action = (v >> 17) & 3; - rt->nh.id = (v >> 6) & 0x7ff; - rt->attr.ttl_dec = !!(v & BIT(5)); - rt->attr.ttl_check = !!(v & BIT(4)); - rt->attr.qos_as = !!(v & BIT(3)); - rt->attr.qos_prio = v & 0x7; - pr_debug("%s: index %d is valid: %d\n", __func__, idx, rt->attr.valid); - pr_debug("%s: next_hop: %d, hit: %d, action :%d, ttl_dec %d, ttl_check %d, dst_null %d\n", - __func__, rt->nh.id, rt->attr.hit, rt->attr.action, rt->attr.ttl_dec, rt->attr.ttl_check, - rt->attr.dst_null); - pr_debug("%s: Destination: %pI4\n", __func__, &rt->dst_ip); - -out: - rtl_table_release(r); -} - -/* Write a host route entry from the table using its index - * We currently only support IPv4 and IPv6 unicast route - */ -static void rtl930x_host_route_write(int idx, struct rtl83xx_route *rt) -{ - u32 v; - /* Access L3_HOST_ROUTE_IPUC table (1) via register RTL9300_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 1); - /* The table has a size of 5 (for UC, 11 for MC) registers */ - - idx = ((idx / 6) * 8) + (idx % 6); - - pr_debug("%s: index %d is valid: %d\n", __func__, idx, rt->attr.valid); - pr_debug("%s: next_hop: %d, hit: %d, action :%d, ttl_dec %d, ttl_check %d, dst_null %d\n", - __func__, rt->nh.id, rt->attr.hit, rt->attr.action, rt->attr.ttl_dec, rt->attr.ttl_check, - rt->attr.dst_null); - pr_debug("%s: GW: %pI4, prefix_len: %d\n", __func__, &rt->dst_ip, rt->prefix_len); - - v = BIT(31); /* Entry is valid */ - v |= (rt->attr.type & 0x3) << 29; - v |= rt->attr.hit ? BIT(20) : 0; - v |= rt->attr.dst_null ? BIT(19) : 0; - v |= (rt->attr.action & 0x3) << 17; - v |= (rt->nh.id & 0x7ff) << 6; - v |= rt->attr.ttl_dec ? BIT(5) : 0; - v |= rt->attr.ttl_check ? BIT(4) : 0; - v |= rt->attr.qos_as ? BIT(3) : 0; - v |= rt->attr.qos_prio & 0x7; - - sw_w32(v, rtl_table_data(r, 0)); - switch (rt->attr.type) { - case 0: /* IPv4 Unicast route */ - sw_w32(0, rtl_table_data(r, 1)); - sw_w32(0, rtl_table_data(r, 2)); - sw_w32(0, rtl_table_data(r, 3)); - sw_w32(rt->dst_ip, rtl_table_data(r, 4)); - break; - case 2: /* IPv6 Unicast route */ - sw_w32(rt->dst_ip6.s6_addr32[0], rtl_table_data(r, 1)); - sw_w32(rt->dst_ip6.s6_addr32[1], rtl_table_data(r, 2)); - sw_w32(rt->dst_ip6.s6_addr32[2], rtl_table_data(r, 3)); - sw_w32(rt->dst_ip6.s6_addr32[3], rtl_table_data(r, 4)); - break; - case 1: /* IPv4 Multicast route */ - case 3: /* IPv6 Multicast route */ - pr_warn("%s: route type not supported\n", __func__); - goto out; - } - - rtl_table_write(r, idx); - -out: - rtl_table_release(r); -} - -/* Look up the index of a prefix route in the routing table CAM for unicast IPv4/6 routes - * using hardware offload. - */ -static int rtl930x_route_lookup_hw(struct rtl83xx_route *rt) -{ - u32 ip4_m, v; - struct in6_addr ip6_m; - - if (rt->attr.type == 1 || rt->attr.type == 3) /* Hardware only supports UC routes */ - return -1; - - sw_w32_mask(0x3 << 19, rt->attr.type, RTL930X_L3_HW_LU_KEY_CTRL); - if (rt->attr.type) { /* IPv6 */ - rtl930x_net6_mask(rt->prefix_len, &ip6_m); - for (int i = 0; i < 4; i++) - sw_w32(rt->dst_ip6.s6_addr32[0] & ip6_m.s6_addr32[0], - RTL930X_L3_HW_LU_KEY_IP_CTRL + (i << 2)); - } else { /* IPv4 */ - ip4_m = inet_make_mask(rt->prefix_len); - sw_w32(0, RTL930X_L3_HW_LU_KEY_IP_CTRL); - sw_w32(0, RTL930X_L3_HW_LU_KEY_IP_CTRL + 4); - sw_w32(0, RTL930X_L3_HW_LU_KEY_IP_CTRL + 8); - v = rt->dst_ip & ip4_m; - pr_info("%s: searching for %pI4\n", __func__, &v); - sw_w32(v, RTL930X_L3_HW_LU_KEY_IP_CTRL + 12); - } - - /* Execute CAM lookup in SoC */ - sw_w32(BIT(15), RTL930X_L3_HW_LU_CTRL); - - /* Wait until execute bit clears and result is ready */ - do { - v = sw_r32(RTL930X_L3_HW_LU_CTRL); - } while (v & BIT(15)); - - pr_info("%s: found: %d, index: %d\n", __func__, !!(v & BIT(14)), v & 0x1ff); - - /* Test if search successful (BIT 14 set) */ - if (v & BIT(14)) - return v & 0x1ff; - - return -1; -} - -static int rtl930x_find_l3_slot(struct rtl83xx_route *rt, bool must_exist) -{ - int slot_width, algorithm, addr, idx; - u32 hash; - struct rtl83xx_route route_entry; - - /* IPv6 entries take up 3 slots */ - slot_width = (rt->attr.type == 0) || (rt->attr.type == 2) ? 1 : 3; - - for (int t = 0; t < 2; t++) { - algorithm = (sw_r32(RTL930X_L3_HOST_TBL_CTRL) >> (2 + t)) & 0x1; - hash = rtl930x_l3_hash4(rt->dst_ip, algorithm, false); - - pr_debug("%s: table %d, algorithm %d, hash %04x\n", __func__, t, algorithm, hash); - - for (int s = 0; s < 6; s += slot_width) { - addr = (t << 12) | ((hash & 0x1ff) << 3) | s; - pr_debug("%s physical address %d\n", __func__, addr); - idx = ((addr / 8) * 6) + (addr % 8); - pr_debug("%s logical address %d\n", __func__, idx); - - rtl930x_host_route_read(idx, &route_entry); - pr_debug("%s route valid %d, route dest: %pI4, hit %d\n", __func__, - rt->attr.valid, &rt->dst_ip, rt->attr.hit); - if (!must_exist && rt->attr.valid) - return idx; - if (must_exist && route_entry.dst_ip == rt->dst_ip) - return idx; - } - } - - return -1; -} - -/* Write a prefix route into the routing table CAM at position idx - * Currently only IPv4 and IPv6 unicast routes are supported - */ -static void rtl930x_route_write(int idx, struct rtl83xx_route *rt) -{ - u32 v, ip4_m; - struct in6_addr ip6_m; - /* Access L3_PREFIX_ROUTE_IPUC table (2) via register RTL9300_TBL_1 */ - /* The table has a size of 11 registers (20 for MC) */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 2); - - pr_debug("%s: index %d is valid: %d\n", __func__, idx, rt->attr.valid); - pr_debug("%s: nexthop: %d, hit: %d, action :%d, ttl_dec %d, ttl_check %d, dst_null %d\n", - __func__, rt->nh.id, rt->attr.hit, rt->attr.action, - rt->attr.ttl_dec, rt->attr.ttl_check, rt->attr.dst_null); - pr_debug("%s: GW: %pI4, prefix_len: %d\n", __func__, &rt->dst_ip, rt->prefix_len); - - v = rt->attr.valid ? BIT(31) : 0; - v |= (rt->attr.type & 0x3) << 29; - sw_w32(v, rtl_table_data(r, 0)); - - v = rt->attr.hit ? BIT(22) : 0; - v |= (rt->attr.action & 0x3) << 18; - v |= (rt->nh.id & 0x7ff) << 7; - v |= rt->attr.ttl_dec ? BIT(6) : 0; - v |= rt->attr.ttl_check ? BIT(5) : 0; - v |= rt->attr.dst_null ? BIT(6) : 0; - v |= rt->attr.qos_as ? BIT(6) : 0; - v |= rt->attr.qos_prio & 0x7; - v |= rt->prefix_len == 0 ? BIT(20) : 0; /* set default route bit */ - - /* set bit mask for entry type always to 0x3 */ - sw_w32(0x3 << 29, rtl_table_data(r, 5)); - - switch (rt->attr.type) { - case 0: /* IPv4 Unicast route */ - sw_w32(0, rtl_table_data(r, 1)); - sw_w32(0, rtl_table_data(r, 2)); - sw_w32(0, rtl_table_data(r, 3)); - sw_w32(rt->dst_ip, rtl_table_data(r, 4)); - - v |= rt->prefix_len == 32 ? BIT(21) : 0; /* set host-route bit */ - ip4_m = inet_make_mask(rt->prefix_len); - sw_w32(0, rtl_table_data(r, 6)); - sw_w32(0, rtl_table_data(r, 7)); - sw_w32(0, rtl_table_data(r, 8)); - sw_w32(ip4_m, rtl_table_data(r, 9)); - break; - case 2: /* IPv6 Unicast route */ - sw_w32(rt->dst_ip6.s6_addr32[0], rtl_table_data(r, 1)); - sw_w32(rt->dst_ip6.s6_addr32[1], rtl_table_data(r, 2)); - sw_w32(rt->dst_ip6.s6_addr32[2], rtl_table_data(r, 3)); - sw_w32(rt->dst_ip6.s6_addr32[3], rtl_table_data(r, 4)); - - v |= rt->prefix_len == 128 ? BIT(21) : 0; /* set host-route bit */ - - rtl930x_net6_mask(rt->prefix_len, &ip6_m); - - sw_w32(ip6_m.s6_addr32[0], rtl_table_data(r, 6)); - sw_w32(ip6_m.s6_addr32[1], rtl_table_data(r, 7)); - sw_w32(ip6_m.s6_addr32[2], rtl_table_data(r, 8)); - sw_w32(ip6_m.s6_addr32[3], rtl_table_data(r, 9)); - break; - case 1: /* IPv4 Multicast route */ - case 3: /* IPv6 Multicast route */ - pr_warn("%s: route type not supported\n", __func__); - rtl_table_release(r); - return; - } - sw_w32(v, rtl_table_data(r, 10)); - - pr_debug("%s: %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x\n", __func__, - sw_r32(rtl_table_data(r, 0)), sw_r32(rtl_table_data(r, 1)), sw_r32(rtl_table_data(r, 2)), - sw_r32(rtl_table_data(r, 3)), sw_r32(rtl_table_data(r, 4)), sw_r32(rtl_table_data(r, 5)), - sw_r32(rtl_table_data(r, 6)), sw_r32(rtl_table_data(r, 7)), sw_r32(rtl_table_data(r, 8)), - sw_r32(rtl_table_data(r, 9)), sw_r32(rtl_table_data(r, 10))); - - rtl_table_write(r, idx); - rtl_table_release(r); -} - - -/* Get the destination MAC and L3 egress interface ID of a nexthop entry from - * the SoC's L3_NEXTHOP table - */ -static void rtl930x_get_l3_nexthop(int idx, u16 *dmac_id, u16 *interface) -{ - u32 v; - /* Read L3_NEXTHOP table (3) via register RTL9300_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 3); - - rtl_table_read(r, idx); - /* The table has a size of 1 register */ - v = sw_r32(rtl_table_data(r, 0)); - rtl_table_release(r); - - *dmac_id = (v >> 7) & 0x7fff; - *interface = v & 0x7f; -} - -// Currently not used -// static int rtl930x_l3_mtu_del(struct rtl838x_switch_priv *priv, int mtu) -// { -// int i; - -// for (i = 0; i < MAX_INTF_MTUS; i++) { -// if (mtu == priv->intf_mtus[i]) -// break; -// } -// if (i >= MAX_INTF_MTUS || !priv->intf_mtu_count[i]) { -// pr_err("%s: No MTU slot found for MTU: %d\n", __func__, mtu); -// return -EINVAL; -// } - -// priv->intf_mtu_count[i]--; -// } - -// Currently not used -// static int rtl930x_l3_mtu_add(struct rtl838x_switch_priv *priv, int mtu) -// { -// int i, free_mtu; -// int mtu_id; - -// /* Try to find an existing mtu-value or a free slot */ -// free_mtu = MAX_INTF_MTUS; -// for (i = 0; i < MAX_INTF_MTUS && priv->intf_mtus[i] != mtu; i++) { -// if ((!priv->intf_mtu_count[i]) && (free_mtu == MAX_INTF_MTUS)) -// free_mtu = i; -// } -// i = (i < MAX_INTF_MTUS) ? i : free_mtu; -// if (i < MAX_INTF_MTUS) { -// mtu_id = i; -// } else { -// pr_err("%s: No free MTU slot available!\n", __func__); -// return -EINVAL; -// } - -// priv->intf_mtus[i] = mtu; -// pr_info("Writing MTU %d to slot %d\n", priv->intf_mtus[i], i); -// /* Set MTU-value of the slot TODO: distinguish between IPv4/IPv6 routes / slots */ -// sw_w32_mask(0xffff << ((i % 2) * 16), priv->intf_mtus[i] << ((i % 2) * 16), -// RTL930X_L3_IP_MTU_CTRL(i)); -// sw_w32_mask(0xffff << ((i % 2) * 16), priv->intf_mtus[i] << ((i % 2) * 16), -// RTL930X_L3_IP6_MTU_CTRL(i)); - -// priv->intf_mtu_count[i]++; - -// return mtu_id; -// } - - -// Currently not used -// /* Creates an interface for a route by setting up the HW tables in the SoC -// static int rtl930x_l3_intf_add(struct rtl838x_switch_priv *priv, struct rtl838x_l3_intf *intf) -// { -// int i, intf_id, mtu_id; -// /* number of MTU-values < 16384 *\/ - -// /* Use the same IPv6 mtu as the ip4 mtu for this route if unset */ -// intf->ip6_mtu = intf->ip6_mtu ? intf->ip6_mtu : intf->ip4_mtu; - -// mtu_id = rtl930x_l3_mtu_add(priv, intf->ip4_mtu); -// pr_info("%s: added mtu %d with mtu-id %d\n", __func__, intf->ip4_mtu, mtu_id); -// if (mtu_id < 0) -// return -ENOSPC; -// intf->ip4_mtu_id = mtu_id; -// intf->ip6_mtu_id = mtu_id; - -// for (i = 0; i < MAX_INTERFACES; i++) { -// if (!priv->interfaces[i]) -// break; -// } -// if (i >= MAX_INTERFACES) { -// pr_err("%s: cannot find free interface entry\n", __func__); -// return -EINVAL; -// } -// intf_id = i; -// priv->interfaces[i] = kzalloc(sizeof(struct rtl838x_l3_intf), GFP_KERNEL); -// if (!priv->interfaces[i]) { -// pr_err("%s: no memory to allocate new interface\n", __func__); -// return -ENOMEM; -// } -// } - -/* Set the destination MAC and L3 egress interface ID for a nexthop entry in the SoC's - * L3_NEXTHOP table. The nexthop entry is identified by idx. - * dmac_id is the reference to the L2 entry in the L2 forwarding table, special values are - * 0x7ffe: TRAP2CPU - * 0x7ffd: TRAP2MASTERCPU - * 0x7fff: DMAC_ID_DROP - */ -static void rtl930x_set_l3_nexthop(int idx, u16 dmac_id, u16 interface) -{ - /* Access L3_NEXTHOP table (3) via register RTL9300_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 3); - - pr_info("%s: Writing to L3_NEXTHOP table, index %d, dmac_id %d, interface %d\n", - __func__, idx, dmac_id, interface); - sw_w32(((dmac_id & 0x7fff) << 7) | (interface & 0x7f), rtl_table_data(r, 0)); - - pr_info("%s: %08x\n", __func__, sw_r32(rtl_table_data(r,0))); - rtl_table_write(r, idx); - rtl_table_release(r); -} - -static void rtl930x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int index) -{ - int block = index / PIE_BLOCK_SIZE; - - sw_w32_mask(0, BIT(block), RTL930X_PIE_BLK_LOOKUP_CTRL); -} - -/* Reads the intermediate representation of the templated match-fields of the - * PIE rule in the pie_rule structure and fills in the raw data fields in the - * raw register space r[]. - * The register space configuration size is identical for the RTL8380/90 and RTL9300, - * however the RTL9310 has 2 more registers / fields and the physical field-ids are different - * on all SoCs - * On the RTL9300 the mask fields are not word-aligend! - */ -static void rtl930x_write_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[]) -{ - for (int i = 0; i < N_FIXED_FIELDS; i++) { - enum template_field_id field_type = t[i]; - u16 data = 0, data_m = 0; - - switch (field_type) { - case TEMPLATE_FIELD_SPM0: - data = pr->spm; - data_m = pr->spm_m; - break; - case TEMPLATE_FIELD_SPM1: - data = pr->spm >> 16; - data_m = pr->spm_m >> 16; - break; - case TEMPLATE_FIELD_OTAG: - data = pr->otag; - data_m = pr->otag_m; - break; - case TEMPLATE_FIELD_SMAC0: - data = pr->smac[4]; - data = (data << 8) | pr->smac[5]; - data_m = pr->smac_m[4]; - data_m = (data_m << 8) | pr->smac_m[5]; - break; - case TEMPLATE_FIELD_SMAC1: - data = pr->smac[2]; - data = (data << 8) | pr->smac[3]; - data_m = pr->smac_m[2]; - data_m = (data_m << 8) | pr->smac_m[3]; - break; - case TEMPLATE_FIELD_SMAC2: - data = pr->smac[0]; - data = (data << 8) | pr->smac[1]; - data_m = pr->smac_m[0]; - data_m = (data_m << 8) | pr->smac_m[1]; - break; - case TEMPLATE_FIELD_DMAC0: - data = pr->dmac[4]; - data = (data << 8) | pr->dmac[5]; - data_m = pr->dmac_m[4]; - data_m = (data_m << 8) | pr->dmac_m[5]; - break; - case TEMPLATE_FIELD_DMAC1: - data = pr->dmac[2]; - data = (data << 8) | pr->dmac[3]; - data_m = pr->dmac_m[2]; - data_m = (data_m << 8) | pr->dmac_m[3]; - break; - case TEMPLATE_FIELD_DMAC2: - data = pr->dmac[0]; - data = (data << 8) | pr->dmac[1]; - data_m = pr->dmac_m[0]; - data_m = (data_m << 8) | pr->dmac_m[1]; - break; - case TEMPLATE_FIELD_ETHERTYPE: - data = pr->ethertype; - data_m = pr->ethertype_m; - break; - case TEMPLATE_FIELD_ITAG: - data = pr->itag; - data_m = pr->itag_m; - break; - case TEMPLATE_FIELD_SIP0: - if (pr->is_ipv6) { - data = pr->sip6.s6_addr16[7]; - data_m = pr->sip6_m.s6_addr16[7]; - } else { - data = pr->sip; - data_m = pr->sip_m; - } - break; - case TEMPLATE_FIELD_SIP1: - if (pr->is_ipv6) { - data = pr->sip6.s6_addr16[6]; - data_m = pr->sip6_m.s6_addr16[6]; - } else { - data = pr->sip >> 16; - data_m = pr->sip_m >> 16; - } - break; - case TEMPLATE_FIELD_SIP2: - case TEMPLATE_FIELD_SIP3: - case TEMPLATE_FIELD_SIP4: - case TEMPLATE_FIELD_SIP5: - case TEMPLATE_FIELD_SIP6: - case TEMPLATE_FIELD_SIP7: - data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; - data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; - break; - case TEMPLATE_FIELD_DIP0: - if (pr->is_ipv6) { - data = pr->dip6.s6_addr16[7]; - data_m = pr->dip6_m.s6_addr16[7]; - } else { - data = pr->dip; - data_m = pr->dip_m; - } - break; - case TEMPLATE_FIELD_DIP1: - if (pr->is_ipv6) { - data = pr->dip6.s6_addr16[6]; - data_m = pr->dip6_m.s6_addr16[6]; - } else { - data = pr->dip >> 16; - data_m = pr->dip_m >> 16; - } - break; - case TEMPLATE_FIELD_DIP2: - case TEMPLATE_FIELD_DIP3: - case TEMPLATE_FIELD_DIP4: - case TEMPLATE_FIELD_DIP5: - case TEMPLATE_FIELD_DIP6: - case TEMPLATE_FIELD_DIP7: - data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; - data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; - break; - case TEMPLATE_FIELD_IP_TOS_PROTO: - data = pr->tos_proto; - data_m = pr->tos_proto_m; - break; - case TEMPLATE_FIELD_L4_SPORT: - data = pr->sport; - data_m = pr->sport_m; - break; - case TEMPLATE_FIELD_L4_DPORT: - data = pr->dport; - data_m = pr->dport_m; - break; - case TEMPLATE_FIELD_DSAP_SSAP: - data = pr->dsap_ssap; - data_m = pr->dsap_ssap_m; - break; - case TEMPLATE_FIELD_TCP_INFO: - data = pr->tcp_info; - data_m = pr->tcp_info_m; - break; - case TEMPLATE_FIELD_RANGE_CHK: - pr_warn("Warning: TEMPLATE_FIELD_RANGE_CHK: not configured\n"); - break; - default: - pr_info("%s: unknown field %d\n", __func__, field_type); - } - - /* On the RTL9300, the mask fields are not word aligned! */ - if (!(i % 2)) { - r[5 - i / 2] = data; - r[12 - i / 2] |= ((u32)data_m << 8); - } else { - r[5 - i / 2] |= ((u32)data) << 16; - r[12 - i / 2] |= ((u32)data_m) << 24; - r[11 - i / 2] |= ((u32)data_m) >> 8; - } - } -} - -// Currently not used -// static void rtl930x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) -// { -// pr->stacking_port = r[6] & BIT(31); -// pr->spn = (r[6] >> 24) & 0x7f; -// pr->mgnt_vlan = r[6] & BIT(23); -// if (pr->phase == PHASE_IACL) -// pr->dmac_hit_sw = r[6] & BIT(22); -// else -// pr->content_too_deep = r[6] & BIT(22); -// pr->not_first_frag = r[6] & BIT(21); -// pr->frame_type_l4 = (r[6] >> 18) & 7; -// pr->frame_type = (r[6] >> 16) & 3; -// pr->otag_fmt = (r[6] >> 15) & 1; -// pr->itag_fmt = (r[6] >> 14) & 1; -// pr->otag_exist = (r[6] >> 13) & 1; -// pr->itag_exist = (r[6] >> 12) & 1; -// pr->frame_type_l2 = (r[6] >> 10) & 3; -// pr->igr_normal_port = (r[6] >> 9) & 1; -// pr->tid = (r[6] >> 8) & 1; - -// pr->stacking_port_m = r[12] & BIT(7); -// pr->spn_m = r[12] & 0x7f; -// pr->mgnt_vlan_m = r[13] & BIT(31); -// if (pr->phase == PHASE_IACL) -// pr->dmac_hit_sw_m = r[13] & BIT(30); -// else -// pr->content_too_deep_m = r[13] & BIT(30); -// pr->not_first_frag_m = r[13] & BIT(29); -// pr->frame_type_l4_m = (r[13] >> 26) & 7; -// pr->frame_type_m = (r[13] >> 24) & 3; -// pr->otag_fmt_m = r[13] & BIT(23); -// pr->itag_fmt_m = r[13] & BIT(22); -// pr->otag_exist_m = r[13] & BIT(21); -// pr->itag_exist_m = r[13] & BIT (20); -// pr->frame_type_l2_m = (r[13] >> 18) & 3; -// pr->igr_normal_port_m = r[13] & BIT(17); -// pr->tid_m = (r[13] >> 16) & 1; - -// pr->valid = r[13] & BIT(15); -// pr->cond_not = r[13] & BIT(14); -// pr->cond_and1 = r[13] & BIT(13); -// pr->cond_and2 = r[13] & BIT(12); -// } - -static void rtl930x_write_pie_fixed_fields(u32 r[], struct pie_rule *pr) -{ - r[6] = pr->stacking_port ? BIT(31) : 0; - r[6] |= ((u32) (pr->spn & 0x7f)) << 24; - r[6] |= pr->mgnt_vlan ? BIT(23) : 0; - if (pr->phase == PHASE_IACL) - r[6] |= pr->dmac_hit_sw ? BIT(22) : 0; - else - r[6] |= pr->content_too_deep ? BIT(22) : 0; - r[6] |= pr->not_first_frag ? BIT(21) : 0; - r[6] |= ((u32) (pr->frame_type_l4 & 0x7)) << 18; - r[6] |= ((u32) (pr->frame_type & 0x3)) << 16; - r[6] |= pr->otag_fmt ? BIT(15) : 0; - r[6] |= pr->itag_fmt ? BIT(14) : 0; - r[6] |= pr->otag_exist ? BIT(13) : 0; - r[6] |= pr->itag_exist ? BIT(12) : 0; - r[6] |= ((u32) (pr->frame_type_l2 & 0x3)) << 10; - r[6] |= pr->igr_normal_port ? BIT(9) : 0; - r[6] |= ((u32) (pr->tid & 0x1)) << 8; - - r[12] |= pr->stacking_port_m ? BIT(7) : 0; - r[12] |= (u32) (pr->spn_m & 0x7f); - r[13] |= pr->mgnt_vlan_m ? BIT(31) : 0; - if (pr->phase == PHASE_IACL) - r[13] |= pr->dmac_hit_sw_m ? BIT(30) : 0; - else - r[13] |= pr->content_too_deep_m ? BIT(30) : 0; - r[13] |= pr->not_first_frag_m ? BIT(29) : 0; - r[13] |= ((u32) (pr->frame_type_l4_m & 0x7)) << 26; - r[13] |= ((u32) (pr->frame_type_m & 0x3)) << 24; - r[13] |= pr->otag_fmt_m ? BIT(23) : 0; - r[13] |= pr->itag_fmt_m ? BIT(22) : 0; - r[13] |= pr->otag_exist_m ? BIT(21) : 0; - r[13] |= pr->itag_exist_m ? BIT(20) : 0; - r[13] |= ((u32) (pr->frame_type_l2_m & 0x3)) << 18; - r[13] |= pr->igr_normal_port_m ? BIT(17) : 0; - r[13] |= ((u32) (pr->tid_m & 0x1)) << 16; - - r[13] |= pr->valid ? BIT(15) : 0; - r[13] |= pr->cond_not ? BIT(14) : 0; - r[13] |= pr->cond_and1 ? BIT(13) : 0; - r[13] |= pr->cond_and2 ? BIT(12) : 0; -} - -static void rtl930x_write_pie_action(u32 r[], struct pie_rule *pr) -{ - /* Either drop or forward */ - if (pr->drop) { - r[14] |= BIT(24) | BIT(25) | BIT(26); /* Do Green, Yellow and Red drops */ - /* Actually DROP, not PERMIT in Green / Yellow / Red */ - r[14] |= BIT(23) | BIT(22) | BIT(20); - } else { - r[14] |= pr->fwd_sel ? BIT(27) : 0; - r[14] |= pr->fwd_act << 18; - r[14] |= BIT(14); /* We overwrite any drop */ - } - if (pr->phase == PHASE_VACL) - r[14] |= pr->fwd_sa_lrn ? BIT(15) : 0; - r[13] |= pr->bypass_sel ? BIT(5) : 0; - r[13] |= pr->nopri_sel ? BIT(4) : 0; - r[13] |= pr->tagst_sel ? BIT(3) : 0; - r[13] |= pr->ovid_sel ? BIT(1) : 0; - r[14] |= pr->ivid_sel ? BIT(31) : 0; - r[14] |= pr->meter_sel ? BIT(30) : 0; - r[14] |= pr->mir_sel ? BIT(29) : 0; - r[14] |= pr->log_sel ? BIT(28) : 0; - - r[14] |= ((u32)(pr->fwd_data & 0x3fff)) << 3; - r[15] |= pr->log_octets ? BIT(31) : 0; - r[15] |= (u32)(pr->meter_data) << 23; - - r[15] |= ((u32)(pr->ivid_act) << 21) & 0x3; - r[15] |= ((u32)(pr->ivid_data) << 9) & 0xfff; - r[16] |= ((u32)(pr->ovid_act) << 30) & 0x3; - r[16] |= ((u32)(pr->ovid_data) & 0xfff) << 16; - r[16] |= (pr->mir_data & 0x3) << 6; - r[17] |= ((u32)(pr->tagst_data) & 0xf) << 28; - r[17] |= ((u32)(pr->nopri_data) & 0x7) << 25; - r[17] |= pr->bypass_ibc_sc ? BIT(16) : 0; -} - -void rtl930x_pie_rule_dump_raw(u32 r[]) -{ - pr_info("Raw IACL table entry:\n"); - pr_info("r 0 - 7: %08x %08x %08x %08x %08x %08x %08x %08x\n", - r[0], r[1], r[2], r[3], r[4], r[5], r[6], r[7]); - pr_info("r 8 - 15: %08x %08x %08x %08x %08x %08x %08x %08x\n", - r[8], r[9], r[10], r[11], r[12], r[13], r[14], r[15]); - pr_info("r 16 - 18: %08x %08x %08x\n", r[16], r[17], r[18]); - pr_info("Match : %08x %08x %08x %08x %08x %08x\n", r[0], r[1], r[2], r[3], r[4], r[5]); - pr_info("Fixed : %06x\n", r[6] >> 8); - pr_info("Match M: %08x %08x %08x %08x %08x %08x\n", - (r[6] << 24) | (r[7] >> 8), (r[7] << 24) | (r[8] >> 8), (r[8] << 24) | (r[9] >> 8), - (r[9] << 24) | (r[10] >> 8), (r[10] << 24) | (r[11] >> 8), - (r[11] << 24) | (r[12] >> 8)); - pr_info("R[13]: %08x\n", r[13]); - pr_info("Fixed M: %06x\n", ((r[12] << 16) | (r[13] >> 16)) & 0xffffff); - pr_info("Valid / not / and1 / and2 : %1x\n", (r[13] >> 12) & 0xf); - pr_info("r 13-16: %08x %08x %08x %08x\n", r[13], r[14], r[15], r[16]); -} - -static int rtl930x_pie_rule_write(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr) -{ - /* Access IACL table (2) via register 0 */ - struct table_reg *q = rtl_table_get(RTL9300_TBL_0, 2); - u32 r[19]; - int block = idx / PIE_BLOCK_SIZE; - u32 t_select = sw_r32(RTL930X_PIE_BLK_TMPLTE_CTRL(block)); - - pr_debug("%s: %d, t_select: %08x\n", __func__, idx, t_select); - - for (int i = 0; i < 19; i++) - r[i] = 0; - - if (!pr->valid) { - rtl_table_write(q, idx); - rtl_table_release(q); - return 0; - } - rtl930x_write_pie_fixed_fields(r, pr); - - pr_debug("%s: template %d\n", __func__, (t_select >> (pr->tid * 4)) & 0xf); - rtl930x_write_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 4)) & 0xf]); - - rtl930x_write_pie_action(r, pr); - -/* rtl930x_pie_rule_dump_raw(r); */ - - for (int i = 0; i < 19; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); - - return 0; -} - -static bool rtl930x_pie_templ_has(int t, enum template_field_id field_type) -{ - for (int i = 0; i < N_FIXED_FIELDS; i++) { - enum template_field_id ft = fixed_templates[t][i]; - if (field_type == ft) - return true; - } - - return false; -} - -/* Verify that the rule pr is compatible with a given template t in block block - * Note that this function is SoC specific since the values of e.g. TEMPLATE_FIELD_SIP0 - * depend on the SoC - */ -static int rtl930x_pie_verify_template(struct rtl838x_switch_priv *priv, - struct pie_rule *pr, int t, int block) -{ - int i; - - if (!pr->is_ipv6 && pr->sip_m && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_SIP0)) - return -1; - - if (!pr->is_ipv6 && pr->dip_m && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_DIP0)) - return -1; - - if (pr->is_ipv6) { - if ((pr->sip6_m.s6_addr32[0] || - pr->sip6_m.s6_addr32[1] || - pr->sip6_m.s6_addr32[2] || - pr->sip6_m.s6_addr32[3]) && - !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) - return -1; - if ((pr->dip6_m.s6_addr32[0] || - pr->dip6_m.s6_addr32[1] || - pr->dip6_m.s6_addr32[2] || - pr->dip6_m.s6_addr32[3]) && - !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) - return -1; - } - - if (ether_addr_to_u64(pr->smac) && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_SMAC0)) - return -1; - - if (ether_addr_to_u64(pr->dmac) && !rtl930x_pie_templ_has(t, TEMPLATE_FIELD_DMAC0)) - return -1; - - /* TODO: Check more */ - - i = find_first_zero_bit(&priv->pie_use_bm[block * 4], PIE_BLOCK_SIZE); - - if (i >= PIE_BLOCK_SIZE) - return -1; - - return i + PIE_BLOCK_SIZE * block; -} - -static int rtl930x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rule *pr) -{ - int idx, block, j, t; - int min_block = 0; - int max_block = priv->n_pie_blocks / 2; - - if (pr->is_egress) { - min_block = max_block; - max_block = priv->n_pie_blocks; - } - pr_debug("In %s\n", __func__); - - mutex_lock(&priv->pie_mutex); - - for (block = min_block; block < max_block; block++) { - for (j = 0; j < 2; j++) { - t = (sw_r32(RTL930X_PIE_BLK_TMPLTE_CTRL(block)) >> (j * 4)) & 0xf; - pr_debug("Testing block %d, template %d, template id %d\n", block, j, t); - pr_debug("%s: %08x\n", - __func__, sw_r32(RTL930X_PIE_BLK_TMPLTE_CTRL(block))); - idx = rtl930x_pie_verify_template(priv, pr, t, block); - if (idx >= 0) - break; - } - if (j < 2) - break; - } - - if (block >= priv->n_pie_blocks) { - mutex_unlock(&priv->pie_mutex); - return -EOPNOTSUPP; - } - - pr_debug("Using block: %d, index %d, template-id %d\n", block, idx, j); - set_bit(idx, priv->pie_use_bm); - - pr->valid = true; - pr->tid = j; /* Mapped to template number */ - pr->tid_m = 0x1; - pr->id = idx; - - rtl930x_pie_lookup_enable(priv, idx); - rtl930x_pie_rule_write(priv, idx, pr); - - mutex_unlock(&priv->pie_mutex); - return 0; -} - -/* Delete a range of Packet Inspection Engine rules */ -static int rtl930x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to) -{ - u32 v = (index_from << 1)| (index_to << 12 ) | BIT(0); - - pr_debug("%s: from %d to %d\n", __func__, index_from, index_to); - mutex_lock(&priv->reg_mutex); - - /* Write from-to and execute bit into control register */ - sw_w32(v, RTL930X_PIE_CLR_CTRL); - - /* Wait until command has completed */ - do { - } while (sw_r32(RTL930X_PIE_CLR_CTRL) & BIT(0)); - - mutex_unlock(&priv->reg_mutex); - return 0; -} - -static void rtl930x_pie_rule_rm(struct rtl838x_switch_priv *priv, struct pie_rule *pr) -{ - int idx = pr->id; - - rtl930x_pie_rule_del(priv, idx, idx); - clear_bit(idx, priv->pie_use_bm); -} - -static void rtl930x_pie_init(struct rtl838x_switch_priv *priv) -{ - u32 template_selectors; - - mutex_init(&priv->pie_mutex); - - pr_info("%s\n", __func__); - /* Enable ACL lookup on all ports, including CPU_PORT */ - for (int i = 0; i <= priv->cpu_port; i++) - sw_w32(1, RTL930X_ACL_PORT_LOOKUP_CTRL(i)); - - /* Include IPG in metering */ - sw_w32_mask(0, 1, RTL930X_METER_GLB_CTRL); - - /* Delete all present rules, block size is 128 on all SoC families */ - rtl930x_pie_rule_del(priv, 0, priv->n_pie_blocks * 128 - 1); - - /* Assign blocks 0-7 to VACL phase (bit = 0), blocks 8-15 to IACL (bit = 1) */ - sw_w32(0xff00, RTL930X_PIE_BLK_PHASE_CTRL); - - /* Enable predefined templates 0, 1 for first quarter of all blocks */ - template_selectors = 0 | (1 << 4); - for (int i = 0; i < priv->n_pie_blocks / 4; i++) - sw_w32(template_selectors, RTL930X_PIE_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 2, 3 for second quarter of all blocks */ - template_selectors = 2 | (3 << 4); - for (int i = priv->n_pie_blocks / 4; i < priv->n_pie_blocks / 2; i++) - sw_w32(template_selectors, RTL930X_PIE_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 0, 1 for third half of all blocks */ - template_selectors = 0 | (1 << 4); - for (int i = priv->n_pie_blocks / 2; i < priv->n_pie_blocks * 3 / 4; i++) - sw_w32(template_selectors, RTL930X_PIE_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 2, 3 for fourth quater of all blocks */ - template_selectors = 2 | (3 << 4); - for (int i = priv->n_pie_blocks * 3 / 4; i < priv->n_pie_blocks; i++) - sw_w32(template_selectors, RTL930X_PIE_BLK_TMPLTE_CTRL(i)); - -} - -/* Sets up an egress interface for L3 actions - * Actions for ip4/6_icmp_redirect, ip4/6_pbr_icmp_redirect are: - * 0: FORWARD, 1: DROP, 2: TRAP2CPU, 3: COPY2CPU, 4: TRAP2MASTERCPU 5: COPY2MASTERCPU - * 6: HARDDROP - * idx is the index in the HW interface table: idx < 0x80 - */ -static void rtl930x_set_l3_egress_intf(int idx, struct rtl838x_l3_intf *intf) -{ - u32 u, v; - /* Read L3_EGR_INTF table (4) via register RTL9300_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 4); - - /* The table has 2 registers */ - u = (intf->vid & 0xfff) << 9; - u |= (intf->smac_idx & 0x3f) << 3; - u |= (intf->ip4_mtu_id & 0x7); - - v = (intf->ip6_mtu_id & 0x7) << 28; - v |= (intf->ttl_scope & 0xff) << 20; - v |= (intf->hl_scope & 0xff) << 12; - v |= (intf->ip4_icmp_redirect & 0x7) << 9; - v |= (intf->ip6_icmp_redirect & 0x7)<< 6; - v |= (intf->ip4_pbr_icmp_redirect & 0x7) << 3; - v |= (intf->ip6_pbr_icmp_redirect & 0x7); - - sw_w32(u, rtl_table_data(r, 0)); - sw_w32(v, rtl_table_data(r, 1)); - - pr_info("%s writing to index %d: %08x %08x\n", __func__, idx, u, v); - rtl_table_write(r, idx & 0x7f); - rtl_table_release(r); -} - -/* Reads a MAC entry for L3 termination as entry point for routing - * from the hardware table - * idx is the index into the L3_ROUTER_MAC table - */ -static void rtl930x_get_l3_router_mac(u32 idx, struct rtl93xx_rt_mac *m) -{ - u32 v, w; - /* Read L3_ROUTER_MAC table (0) via register RTL9300_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 0); - - rtl_table_read(r, idx); - /* The table has a size of 7 registers, 64 entries */ - v = sw_r32(rtl_table_data(r, 0)); - w = sw_r32(rtl_table_data(r, 3)); - m->valid = !!(v & BIT(20)); - if (!m->valid) - goto out; - - m->p_type = !!(v & BIT(19)); - m->p_id = (v >> 13) & 0x3f; /* trunk id of port */ - m->vid = v & 0xfff; - m->vid_mask = w & 0xfff; - m->action = sw_r32(rtl_table_data(r, 6)) & 0x7; - m->mac_mask = ((((u64)sw_r32(rtl_table_data(r, 5))) << 32) & 0xffffffffffffULL) | - (sw_r32(rtl_table_data(r, 4))); - m->mac = ((((u64)sw_r32(rtl_table_data(r, 1))) << 32) & 0xffffffffffffULL) | - (sw_r32(rtl_table_data(r, 2))); - /* Bits L3_INTF and BMSK_L3_INTF are 0 */ - -out: - rtl_table_release(r); -} - -/* Writes a MAC entry for L3 termination as entry point for routing - * into the hardware table - * idx is the index into the L3_ROUTER_MAC table - */ -static void rtl930x_set_l3_router_mac(u32 idx, struct rtl93xx_rt_mac *m) -{ - u32 v, w; - /* Read L3_ROUTER_MAC table (0) via register RTL9300_TBL_1 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_1, 0); - - /* The table has a size of 7 registers, 64 entries */ - v = BIT(20); /* mac entry valid, port type is 0: individual */ - v |= (m->p_id & 0x3f) << 13; - v |= (m->vid & 0xfff); /* Set the interface_id to the vlan id */ - - w = m->vid_mask; - w |= (m->p_id_mask & 0x3f) << 13; - - sw_w32(v, rtl_table_data(r, 0)); - sw_w32(w, rtl_table_data(r, 3)); - - /* Set MAC address, L3_INTF (bit 12 in register 1) needs to be 0 */ - sw_w32((u32)(m->mac), rtl_table_data(r, 2)); - sw_w32(m->mac >> 32, rtl_table_data(r, 1)); - - /* Set MAC address mask, BMSK_L3_INTF (bit 12 in register 5) needs to be 0 */ - sw_w32((u32)(m->mac_mask >> 32), rtl_table_data(r, 4)); - sw_w32((u32)m->mac_mask, rtl_table_data(r, 5)); - - sw_w32(m->action & 0x7, rtl_table_data(r, 6)); - - pr_debug("%s writing index %d: %08x %08x %08x %08x %08x %08x %08x\n", __func__, idx, - sw_r32(rtl_table_data(r, 0)), sw_r32(rtl_table_data(r, 1)), sw_r32(rtl_table_data(r, 2)), - sw_r32(rtl_table_data(r, 3)), sw_r32(rtl_table_data(r, 4)), sw_r32(rtl_table_data(r, 5)), - sw_r32(rtl_table_data(r, 6)) - ); - rtl_table_write(r, idx); - rtl_table_release(r); -} - -/* Get the Destination-MAC of an L3 egress interface or the Source MAC for routed packets - * from the SoC's L3_EGR_INTF_MAC table - * Indexes 0-2047 are DMACs, 2048+ are SMACs - */ -static u64 rtl930x_get_l3_egress_mac(u32 idx) -{ - u64 mac; - /* Read L3_EGR_INTF_MAC table (2) via register RTL9300_TBL_2 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_2, 2); - - rtl_table_read(r, idx); - /* The table has a size of 2 registers */ - mac = sw_r32(rtl_table_data(r, 0)); - mac <<= 32; - mac |= sw_r32(rtl_table_data(r, 1)); - rtl_table_release(r); - - return mac; -} - -/* Set the Destination-MAC of a route or the Source MAC of an L3 egress interface - * in the SoC's L3_EGR_INTF_MAC table - * Indexes 0-2047 are DMACs, 2048+ are SMACs - */ -static void rtl930x_set_l3_egress_mac(u32 idx, u64 mac) -{ - /* Access L3_EGR_INTF_MAC table (2) via register RTL9300_TBL_2 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_2, 2); - - /* The table has a size of 2 registers */ - sw_w32(mac >> 32, rtl_table_data(r, 0)); - sw_w32(mac, rtl_table_data(r, 1)); - - pr_debug("%s: setting index %d to %016llx\n", __func__, idx, mac); - rtl_table_write(r, idx); - rtl_table_release(r); -} - -/* Configure L3 routing settings of the device: - * - MTUs - * - Egress interface - * - The router's MAC address on which routed packets are expected - * - MAC addresses used as source macs of routed packets - */ -int rtl930x_l3_setup(struct rtl838x_switch_priv *priv) -{ - /* Setup MTU with id 0 for default interface */ - for (int i = 0; i < MAX_INTF_MTUS; i++) - priv->intf_mtu_count[i] = priv->intf_mtus[i] = 0; - - priv->intf_mtu_count[0] = 0; /* Needs to stay forever */ - priv->intf_mtus[0] = DEFAULT_MTU; - sw_w32_mask(0xffff, DEFAULT_MTU, RTL930X_L3_IP_MTU_CTRL(0)); - sw_w32_mask(0xffff, DEFAULT_MTU, RTL930X_L3_IP6_MTU_CTRL(0)); - priv->intf_mtus[1] = DEFAULT_MTU; - sw_w32_mask(0xffff0000, DEFAULT_MTU << 16, RTL930X_L3_IP_MTU_CTRL(0)); - sw_w32_mask(0xffff0000, DEFAULT_MTU << 16, RTL930X_L3_IP6_MTU_CTRL(0)); - - sw_w32_mask(0xffff, DEFAULT_MTU, RTL930X_L3_IP_MTU_CTRL(1)); - sw_w32_mask(0xffff, DEFAULT_MTU, RTL930X_L3_IP6_MTU_CTRL(1)); - sw_w32_mask(0xffff0000, DEFAULT_MTU << 16, RTL930X_L3_IP_MTU_CTRL(1)); - sw_w32_mask(0xffff0000, DEFAULT_MTU << 16, RTL930X_L3_IP6_MTU_CTRL(1)); - - /* Clear all source port MACs */ - for (int i = 0; i < MAX_SMACS; i++) - rtl930x_set_l3_egress_mac(L3_EGRESS_DMACS + i, 0ULL); - - /* Configure the default L3 hash algorithm */ - sw_w32_mask(BIT(2), 0, RTL930X_L3_HOST_TBL_CTRL); /* Algorithm selection 0 = 0 */ - sw_w32_mask(0, BIT(3), RTL930X_L3_HOST_TBL_CTRL); /* Algorithm selection 1 = 1 */ - - pr_info("L3_IPUC_ROUTE_CTRL %08x, IPMC_ROUTE %08x, IP6UC_ROUTE %08x, IP6MC_ROUTE %08x\n", - sw_r32(RTL930X_L3_IPUC_ROUTE_CTRL), sw_r32(RTL930X_L3_IPMC_ROUTE_CTRL), - sw_r32(RTL930X_L3_IP6UC_ROUTE_CTRL), sw_r32(RTL930X_L3_IP6MC_ROUTE_CTRL)); - sw_w32_mask(0, 1, RTL930X_L3_IPUC_ROUTE_CTRL); - sw_w32_mask(0, 1, RTL930X_L3_IP6UC_ROUTE_CTRL); - sw_w32_mask(0, 1, RTL930X_L3_IPMC_ROUTE_CTRL); - sw_w32_mask(0, 1, RTL930X_L3_IP6MC_ROUTE_CTRL); - - sw_w32(0x00002001, RTL930X_L3_IPUC_ROUTE_CTRL); - sw_w32(0x00014581, RTL930X_L3_IP6UC_ROUTE_CTRL); - sw_w32(0x00000501, RTL930X_L3_IPMC_ROUTE_CTRL); - sw_w32(0x00012881, RTL930X_L3_IP6MC_ROUTE_CTRL); - - pr_info("L3_IPUC_ROUTE_CTRL %08x, IPMC_ROUTE %08x, IP6UC_ROUTE %08x, IP6MC_ROUTE %08x\n", - sw_r32(RTL930X_L3_IPUC_ROUTE_CTRL), sw_r32(RTL930X_L3_IPMC_ROUTE_CTRL), - sw_r32(RTL930X_L3_IP6UC_ROUTE_CTRL), sw_r32(RTL930X_L3_IP6MC_ROUTE_CTRL)); - - /* Trap non-ip traffic to the CPU-port (e.g. ARP so we stay reachable) */ - sw_w32_mask(0x3 << 8, 0x1 << 8, RTL930X_L3_IP_ROUTE_CTRL); - pr_info("L3_IP_ROUTE_CTRL %08x\n", sw_r32(RTL930X_L3_IP_ROUTE_CTRL)); - - /* PORT_ISO_RESTRICT_ROUTE_CTRL? */ - - /* Do not use prefix route 0 because of HW limitations */ - set_bit(0, priv->route_use_bm); - - return 0; -} - -static u32 rtl930x_packet_cntr_read(int counter) -{ - u32 v; - - /* Read LOG table (3) via register RTL9300_TBL_0 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 3); - - pr_debug("In %s, id %d\n", __func__, counter); - rtl_table_read(r, counter / 2); - - pr_debug("Registers: %08x %08x\n", - sw_r32(rtl_table_data(r, 0)), sw_r32(rtl_table_data(r, 1))); - /* The table has a size of 2 registers */ - if (counter % 2) - v = sw_r32(rtl_table_data(r, 0)); - else - v = sw_r32(rtl_table_data(r, 1)); - - rtl_table_release(r); - - return v; -} - -static void rtl930x_packet_cntr_clear(int counter) -{ - /* Access LOG table (3) via register RTL9300_TBL_0 */ - struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 3); - - pr_info("In %s, id %d\n", __func__, counter); - /* The table has a size of 2 registers */ - if (counter % 2) - sw_w32(0, rtl_table_data(r, 0)); - else - sw_w32(0, rtl_table_data(r, 1)); - - rtl_table_write(r, counter / 2); - - rtl_table_release(r); -} - -void rtl930x_vlan_port_keep_tag_set(int port, bool keep_outer, bool keep_inner) -{ - sw_w32(FIELD_PREP(RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_OTAG_STS_MASK, - keep_outer ? RTL930X_VLAN_PORT_TAG_STS_TAGGED : RTL930X_VLAN_PORT_TAG_STS_UNTAG) | - FIELD_PREP(RTL930X_VLAN_PORT_TAG_STS_CTRL_EGR_ITAG_STS_MASK, - keep_inner ? RTL930X_VLAN_PORT_TAG_STS_TAGGED : RTL930X_VLAN_PORT_TAG_STS_UNTAG), - RTL930X_VLAN_PORT_TAG_STS_CTRL(port)); -} - -void rtl930x_vlan_port_pvidmode_set(int port, enum pbvlan_type type, enum pbvlan_mode mode) -{ - if (type == PBVLAN_TYPE_INNER) - sw_w32_mask(0x3, mode, RTL930X_VLAN_PORT_PB_VLAN + (port << 2)); - else - sw_w32_mask(0x3 << 14, mode << 14 ,RTL930X_VLAN_PORT_PB_VLAN + (port << 2)); -} - -void rtl930x_vlan_port_pvid_set(int port, enum pbvlan_type type, int pvid) -{ - if (type == PBVLAN_TYPE_INNER) - sw_w32_mask(0xfff << 2, pvid << 2, RTL930X_VLAN_PORT_PB_VLAN + (port << 2)); - else - sw_w32_mask(0xfff << 16, pvid << 16, RTL930X_VLAN_PORT_PB_VLAN + (port << 2)); -} - -static int rtl930x_set_ageing_time(unsigned long msec) -{ - int t = sw_r32(RTL930X_L2_AGE_CTRL); - - t &= 0x1FFFFF; - t = (t * 7) / 10; - pr_debug("L2 AGING time: %d sec\n", t); - - t = (msec / 100 + 6) / 7; - t = t > 0x1FFFFF ? 0x1FFFFF : t; - sw_w32_mask(0x1FFFFF, t, RTL930X_L2_AGE_CTRL); - pr_debug("Dynamic aging for ports: %x\n", sw_r32(RTL930X_L2_PORT_AGE_CTRL)); - - return 0; -} - -static void rtl930x_set_igr_filter(int port, enum igr_filter state) -{ - sw_w32_mask(0x3 << ((port & 0xf)<<1), state << ((port & 0xf)<<1), - RTL930X_VLAN_PORT_IGR_FLTR + (((port >> 4) << 2))); -} - -static void rtl930x_set_egr_filter(int port, enum egr_filter state) -{ - sw_w32_mask(0x1 << (port % 0x1D), state << (port % 0x1D), - RTL930X_VLAN_PORT_EGR_FLTR + (((port / 29) << 2))); -} - -void rtl930x_set_distribution_algorithm(int group, int algoidx, u32 algomsk) -{ - u32 l3shift = 0; - u32 newmask = 0; - - /* TODO: for now we set algoidx to 0 */ - algoidx = 0; - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SIP_BIT) { - l3shift = 4; - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SIP_BIT; - } - if (algomsk & TRUNK_DISTRIBUTION_ALGO_DIP_BIT) { - l3shift = 4; - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_DIP_BIT; - } - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT) { - l3shift = 4; - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT; - } - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT) { - l3shift = 4; - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT; - } - - if (l3shift == 4) { - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SMAC_BIT) - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SMAC_BIT; - - if (algomsk & TRUNK_DISTRIBUTION_ALGO_DMAC_BIT) - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_DMAC_BIT; - } else { - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SMAC_BIT) - newmask |= TRUNK_DISTRIBUTION_ALGO_L2_SMAC_BIT; - if (algomsk & TRUNK_DISTRIBUTION_ALGO_DMAC_BIT) - newmask |= TRUNK_DISTRIBUTION_ALGO_L2_DMAC_BIT; - } - - sw_w32(newmask << l3shift, RTL930X_TRK_HASH_CTRL + (algoidx << 2)); -} - -static void rtl930x_led_init(struct rtl838x_switch_priv *priv) -{ - struct device_node *node; - u32 pm = 0; - - pr_info("%s called\n", __func__); - node = of_find_compatible_node(NULL, NULL, "realtek,rtl9300-leds"); - if (!node) { - pr_info("%s No compatible LED node found\n", __func__); - return; - } - - for (int set = 0; set < 4; set++) { - char set_name[16] = {0}; - u32 set_config[4]; - int leds_in_this_set = 0; - - /* Reset LED set configuration */ - sw_w32(0, RTL930X_LED_SETX_0_CTRL(set)); - sw_w32(0, RTL930X_LED_SETX_1_CTRL(set)); - - /** - * Each led set has 4 number of leds, and each LED is configured with 16 bits - * So each 32bit register holds configuration for 2 leds - * And therefore each set requires 2 registers for configuring 4 LEDs - * - */ - sprintf(set_name, "led_set%d", set); - leds_in_this_set = of_property_count_u32_elems(node, set_name); - - if (leds_in_this_set == 0 || leds_in_this_set > sizeof(set_config)) { - pr_err("%s led_set configuration invalid skipping over this set\n", __func__); - continue; - } - - if (of_property_read_u32_array(node, set_name, set_config, leds_in_this_set)) { - break; - } - - /* Write configuration as per number of LEDs */ - for (int i=0, led = leds_in_this_set-1; led >= 0; led--,i++) { - sw_w32_mask(0xffff << RTL930X_LED_SET_LEDX_SHIFT(led), - (0xffff & set_config[i]) << RTL930X_LED_SET_LEDX_SHIFT(led), - RTL930X_LED_SETX_LEDY(set, led)); - } - } - - for (int i = 0; i < priv->cpu_port; i++) { - int pos = (i << 1) % 32; - u32 set; - - sw_w32_mask(0x3 << pos, 0, RTL930X_LED_PORT_FIB_SET_SEL_CTRL(i)); - sw_w32_mask(0x3 << pos, 0, RTL930X_LED_PORT_COPR_SET_SEL_CTRL(i)); - - if (!priv->ports[i].phy) - continue; - - /* 0x0 = 1 led, 0x1 = 2 leds, 0x2 = 3 leds, 0x3 = 4 leds per port */ - sw_w32_mask(0x3 << pos, (priv->ports[i].leds_on_this_port -1) << pos, RTL930X_LED_PORT_NUM_CTRL(i)); - - pm |= BIT(i); - - set = priv->ports[i].led_set; - sw_w32_mask(0, set << pos, RTL930X_LED_PORT_COPR_SET_SEL_CTRL(i)); - sw_w32_mask(0, set << pos, RTL930X_LED_PORT_FIB_SET_SEL_CTRL(i)); - } - - /* Set LED mode to serial (0x1) */ - sw_w32_mask(0x3, 0x1, RTL930X_LED_GLB_CTRL); - - /* Set LED active state */ - if (of_property_read_bool(node, "active-low")) - sw_w32_mask(RTL930X_LED_GLB_ACTIVE_LOW, 0, RTL930X_LED_GLB_CTRL); - else - sw_w32_mask(0, RTL930X_LED_GLB_ACTIVE_LOW, RTL930X_LED_GLB_CTRL); - - /* Set port type masks */ - sw_w32(pm, RTL930X_LED_PORT_COPR_MASK_CTRL); - sw_w32(pm, RTL930X_LED_PORT_FIB_MASK_CTRL); - sw_w32(pm, RTL930X_LED_PORT_COMBO_MASK_CTRL); - - for (int i = 0; i < 24; i++) - pr_info("%s %08x: %08x\n",__func__, 0xbb00cc00 + i * 4, sw_r32(0xcc00 + i * 4)); -} - -const struct rtl838x_reg rtl930x_reg = { - .mask_port_reg_be = rtl838x_mask_port_reg, - .set_port_reg_be = rtl838x_set_port_reg, - .get_port_reg_be = rtl838x_get_port_reg, - .mask_port_reg_le = rtl838x_mask_port_reg, - .set_port_reg_le = rtl838x_set_port_reg, - .get_port_reg_le = rtl838x_get_port_reg, - .stat_port_rst = RTL930X_STAT_PORT_RST, - .stat_rst = RTL930X_STAT_RST, - .stat_port_std_mib = RTL930X_STAT_PORT_MIB_CNTR, - .traffic_enable = rtl930x_traffic_enable, - .traffic_disable = rtl930x_traffic_disable, - .traffic_get = rtl930x_traffic_get, - .traffic_set = rtl930x_traffic_set, - .l2_ctrl_0 = RTL930X_L2_CTRL, - .l2_ctrl_1 = RTL930X_L2_AGE_CTRL, - .l2_port_aging_out = RTL930X_L2_PORT_AGE_CTRL, - .set_ageing_time = rtl930x_set_ageing_time, - .smi_poll_ctrl = RTL930X_SMI_POLL_CTRL, /* TODO: Difference to RTL9300_SMI_PRVTE_POLLING_CTRL */ - .l2_tbl_flush_ctrl = RTL930X_L2_TBL_FLUSH_CTRL, - .exec_tbl0_cmd = rtl930x_exec_tbl0_cmd, - .exec_tbl1_cmd = rtl930x_exec_tbl1_cmd, - .tbl_access_data_0 = rtl930x_tbl_access_data_0, - .isr_glb_src = RTL930X_ISR_GLB, - .isr_port_link_sts_chg = RTL930X_ISR_PORT_LINK_STS_CHG, - .imr_port_link_sts_chg = RTL930X_IMR_PORT_LINK_STS_CHG, - .imr_glb = RTL930X_IMR_GLB, - .vlan_tables_read = rtl930x_vlan_tables_read, - .vlan_set_tagged = rtl930x_vlan_set_tagged, - .vlan_set_untagged = rtl930x_vlan_set_untagged, - .vlan_profile_dump = rtl930x_vlan_profile_dump, - .vlan_profile_setup = rtl930x_vlan_profile_setup, - .vlan_fwd_on_inner = rtl930x_vlan_fwd_on_inner, - .set_vlan_igr_filter = rtl930x_set_igr_filter, - .set_vlan_egr_filter = rtl930x_set_egr_filter, - .stp_get = rtl930x_stp_get, - .stp_set = rtl930x_stp_set, - .mac_force_mode_ctrl = rtl930x_mac_force_mode_ctrl, - .mac_port_ctrl = rtl930x_mac_port_ctrl, - .l2_port_new_salrn = rtl930x_l2_port_new_salrn, - .l2_port_new_sa_fwd = rtl930x_l2_port_new_sa_fwd, - .mir_ctrl = RTL930X_MIR_CTRL, - .mir_dpm = RTL930X_MIR_DPM_CTRL, - .mir_spm = RTL930X_MIR_SPM_CTRL, - .mac_link_sts = RTL930X_MAC_LINK_STS, - .mac_link_dup_sts = RTL930X_MAC_LINK_DUP_STS, - .mac_link_spd_sts = rtl930x_mac_link_spd_sts, - .mac_rx_pause_sts = RTL930X_MAC_RX_PAUSE_STS, - .mac_tx_pause_sts = RTL930X_MAC_TX_PAUSE_STS, - .read_l2_entry_using_hash = rtl930x_read_l2_entry_using_hash, - .write_l2_entry_using_hash = rtl930x_write_l2_entry_using_hash, - .read_cam = rtl930x_read_cam, - .write_cam = rtl930x_write_cam, - .vlan_port_keep_tag_set = rtl930x_vlan_port_keep_tag_set, - .vlan_port_pvidmode_set = rtl930x_vlan_port_pvidmode_set, - .vlan_port_pvid_set = rtl930x_vlan_port_pvid_set, - .trk_mbr_ctr = rtl930x_trk_mbr_ctr, - .rma_bpdu_fld_pmask = RTL930X_RMA_BPDU_FLD_PMSK, - .init_eee = rtl930x_init_eee, - .port_eee_set = rtl930x_port_eee_set, - .eee_port_ability = rtl930x_eee_port_ability, - .l2_hash_seed = rtl930x_l2_hash_seed, - .l2_hash_key = rtl930x_l2_hash_key, - .read_mcast_pmask = rtl930x_read_mcast_pmask, - .write_mcast_pmask = rtl930x_write_mcast_pmask, - .pie_init = rtl930x_pie_init, - .pie_rule_write = rtl930x_pie_rule_write, - .pie_rule_add = rtl930x_pie_rule_add, - .pie_rule_rm = rtl930x_pie_rule_rm, - .l2_learning_setup = rtl930x_l2_learning_setup, - .packet_cntr_read = rtl930x_packet_cntr_read, - .packet_cntr_clear = rtl930x_packet_cntr_clear, - .route_read = rtl930x_route_read, - .route_write = rtl930x_route_write, - .host_route_write = rtl930x_host_route_write, - .l3_setup = rtl930x_l3_setup, - .set_l3_nexthop = rtl930x_set_l3_nexthop, - .get_l3_nexthop = rtl930x_get_l3_nexthop, - .get_l3_egress_mac = rtl930x_get_l3_egress_mac, - .set_l3_egress_mac = rtl930x_set_l3_egress_mac, - .find_l3_slot = rtl930x_find_l3_slot, - .route_lookup_hw = rtl930x_route_lookup_hw, - .get_l3_router_mac = rtl930x_get_l3_router_mac, - .set_l3_router_mac = rtl930x_set_l3_router_mac, - .set_l3_egress_intf = rtl930x_set_l3_egress_intf, - .set_distribution_algorithm = rtl930x_set_distribution_algorithm, - .led_init = rtl930x_led_init, -}; diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c deleted file mode 100644 index 2ba3a7819d..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl931x.c +++ /dev/null @@ -1,1694 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include - -#include "rtl83xx.h" - -#define RTL931X_VLAN_PORT_TAG_STS_INTERNAL 0x0 -#define RTL931X_VLAN_PORT_TAG_STS_UNTAG 0x1 -#define RTL931X_VLAN_PORT_TAG_STS_TAGGED 0x2 -#define RTL931X_VLAN_PORT_TAG_STS_PRIORITY_TAGGED 0x3 - -#define RTL931X_VLAN_PORT_TAG_CTRL_BASE 0x4860 -/* port 0-56 */ -#define RTL931X_VLAN_PORT_TAG_CTRL(port) \ - RTL931X_VLAN_PORT_TAG_CTRL_BASE + (port << 2) -#define RTL931X_VLAN_PORT_TAG_EGR_OTAG_STS_MASK GENMASK(13,12) -#define RTL931X_VLAN_PORT_TAG_EGR_ITAG_STS_MASK GENMASK(11,10) -#define RTL931X_VLAN_PORT_TAG_EGR_OTAG_KEEP_MASK GENMASK(9,9) -#define RTL931X_VLAN_PORT_TAG_EGR_ITAG_KEEP_MASK GENMASK(8,8) -#define RTL931X_VLAN_PORT_TAG_IGR_OTAG_KEEP_MASK GENMASK(7,7) -#define RTL931X_VLAN_PORT_TAG_IGR_ITAG_KEEP_MASK GENMASK(6,6) -#define RTL931X_VLAN_PORT_TAG_OTPID_IDX_MASK GENMASK(5,4) -#define RTL931X_VLAN_PORT_TAG_OTPID_KEEP_MASK GENMASK(3,3) -#define RTL931X_VLAN_PORT_TAG_ITPID_IDX_MASK GENMASK(2,1) -#define RTL931X_VLAN_PORT_TAG_ITPID_KEEP_MASK GENMASK(0,0) - -extern struct mutex smi_lock; -extern struct rtl83xx_soc_info soc_info; - -/* Definition of the RTL931X-specific template field IDs as used in the PIE */ -enum template_field_id { - TEMPLATE_FIELD_SPM0 = 1, - TEMPLATE_FIELD_SPM1 = 2, - TEMPLATE_FIELD_SPM2 = 3, - TEMPLATE_FIELD_SPM3 = 4, - TEMPLATE_FIELD_DMAC0 = 9, - TEMPLATE_FIELD_DMAC1 = 10, - TEMPLATE_FIELD_DMAC2 = 11, - TEMPLATE_FIELD_SMAC0 = 12, - TEMPLATE_FIELD_SMAC1 = 13, - TEMPLATE_FIELD_SMAC2 = 14, - TEMPLATE_FIELD_ETHERTYPE = 15, - TEMPLATE_FIELD_OTAG = 16, - TEMPLATE_FIELD_ITAG = 17, - TEMPLATE_FIELD_SIP0 = 18, - TEMPLATE_FIELD_SIP1 = 19, - TEMPLATE_FIELD_DIP0 = 20, - TEMPLATE_FIELD_DIP1 = 21, - TEMPLATE_FIELD_IP_TOS_PROTO = 22, - TEMPLATE_FIELD_L4_SPORT = 23, - TEMPLATE_FIELD_L4_DPORT = 24, - TEMPLATE_FIELD_L34_HEADER = 25, - TEMPLATE_FIELD_TCP_INFO = 26, - TEMPLATE_FIELD_SIP2 = 34, - TEMPLATE_FIELD_SIP3 = 35, - TEMPLATE_FIELD_SIP4 = 36, - TEMPLATE_FIELD_SIP5 = 37, - TEMPLATE_FIELD_SIP6 = 38, - TEMPLATE_FIELD_SIP7 = 39, - TEMPLATE_FIELD_DIP2 = 42, - TEMPLATE_FIELD_DIP3 = 43, - TEMPLATE_FIELD_DIP4 = 44, - TEMPLATE_FIELD_DIP5 = 45, - TEMPLATE_FIELD_DIP6 = 46, - TEMPLATE_FIELD_DIP7 = 47, - TEMPLATE_FIELD_FLOW_LABEL = 49, - TEMPLATE_FIELD_DSAP_SSAP = 50, - TEMPLATE_FIELD_FWD_VID = 52, - TEMPLATE_FIELD_RANGE_CHK = 53, - TEMPLATE_FIELD_SLP = 55, - TEMPLATE_FIELD_DLP = 56, - TEMPLATE_FIELD_META_DATA = 57, - TEMPLATE_FIELD_FIRST_MPLS1 = 60, - TEMPLATE_FIELD_FIRST_MPLS2 = 61, - TEMPLATE_FIELD_DPM3 = 8, -}; - -/* The meaning of TEMPLATE_FIELD_VLAN depends on phase and the configuration in - * RTL931X_PIE_CTRL. We use always the same definition and map to the inner VLAN tag: - */ -#define TEMPLATE_FIELD_VLAN TEMPLATE_FIELD_ITAG - -/* Number of fixed templates predefined in the RTL9300 SoC */ -#define N_FIXED_TEMPLATES 5 -/* RTL931x specific predefined templates */ -static enum template_field_id fixed_templates[N_FIXED_TEMPLATES][N_FIXED_FIELDS_RTL931X] = -{ - { - TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2, - TEMPLATE_FIELD_SMAC0, TEMPLATE_FIELD_SMAC1, TEMPLATE_FIELD_SMAC2, - TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_DSAP_SSAP, - TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1, - TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3 - }, { - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, - TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_IP_TOS_PROTO, TEMPLATE_FIELD_TCP_INFO, - TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT, TEMPLATE_FIELD_VLAN, - TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1, - TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3 - }, { - TEMPLATE_FIELD_DMAC0, TEMPLATE_FIELD_DMAC1, TEMPLATE_FIELD_DMAC2, - TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_ETHERTYPE, TEMPLATE_FIELD_IP_TOS_PROTO, - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_DIP0, - TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT, - TEMPLATE_FIELD_META_DATA, TEMPLATE_FIELD_SLP - }, { - TEMPLATE_FIELD_DIP0, TEMPLATE_FIELD_DIP1, TEMPLATE_FIELD_DIP2, - TEMPLATE_FIELD_DIP3, TEMPLATE_FIELD_DIP4, TEMPLATE_FIELD_DIP5, - TEMPLATE_FIELD_DIP6, TEMPLATE_FIELD_DIP7, TEMPLATE_FIELD_IP_TOS_PROTO, - TEMPLATE_FIELD_TCP_INFO, TEMPLATE_FIELD_L4_SPORT, TEMPLATE_FIELD_L4_DPORT, - TEMPLATE_FIELD_RANGE_CHK, TEMPLATE_FIELD_SLP - }, { - TEMPLATE_FIELD_SIP0, TEMPLATE_FIELD_SIP1, TEMPLATE_FIELD_SIP2, - TEMPLATE_FIELD_SIP3, TEMPLATE_FIELD_SIP4, TEMPLATE_FIELD_SIP5, - TEMPLATE_FIELD_SIP6, TEMPLATE_FIELD_SIP7, TEMPLATE_FIELD_META_DATA, - TEMPLATE_FIELD_VLAN, TEMPLATE_FIELD_SPM0, TEMPLATE_FIELD_SPM1, - TEMPLATE_FIELD_SPM2, TEMPLATE_FIELD_SPM3 - }, -}; - -inline void rtl931x_exec_tbl0_cmd(u32 cmd) -{ - sw_w32(cmd, RTL931X_TBL_ACCESS_CTRL_0); - do { } while (sw_r32(RTL931X_TBL_ACCESS_CTRL_0) & (1 << 20)); -} - -inline void rtl931x_exec_tbl1_cmd(u32 cmd) -{ - sw_w32(cmd, RTL931X_TBL_ACCESS_CTRL_1); - do { } while (sw_r32(RTL931X_TBL_ACCESS_CTRL_1) & (1 << 17)); -} - -inline int rtl931x_tbl_access_data_0(int i) -{ - return RTL931X_TBL_ACCESS_DATA_0(i); -} - -void rtl931x_vlan_profile_dump(int index) -{ - u64 profile[4]; - - if (index < 0 || index > 15) - return; - - profile[0] = sw_r32(RTL931X_VLAN_PROFILE_SET(index)); - profile[1] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 4) & 0x1FFFFFFFULL) << 32 | - (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 8) & 0xFFFFFFFF); - profile[2] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 16) & 0x1FFFFFFFULL) << 32 | - (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 12) & 0xFFFFFFFF); - profile[3] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 20) & 0x1FFFFFFFULL) << 32 | - (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 24) & 0xFFFFFFFF); - - pr_info("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %llx, \ - IPv4 Unknown MultiCast Field %llx, IPv6 Unknown MultiCast Field: %llx", - index, (u32) (profile[0] & (3 << 14)), profile[1], profile[2], profile[3]); -} - -static void rtl931x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) -{ - u32 cmd = 1 << 20 | /* Execute cmd */ - 0 << 19 | /* Read */ - 5 << 15 | /* Table type 0b101 */ - (msti & 0x3fff); - priv->r->exec_tbl0_cmd(cmd); - - for (int i = 0; i < 4; i++) - port_state[i] = sw_r32(priv->r->tbl_access_data_0(i)); -} - -static void rtl931x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) -{ - u32 cmd = 1 << 20 | /* Execute cmd */ - 1 << 19 | /* Write */ - 5 << 15 | /* Table type 0b101 */ - (msti & 0x3fff); - for (int i = 0; i < 4; i++) - sw_w32(port_state[i], priv->r->tbl_access_data_0(i)); - priv->r->exec_tbl0_cmd(cmd); -} - -inline static int rtl931x_trk_mbr_ctr(int group) -{ - return RTL931X_TRK_MBR_CTRL + (group << 2); -} - -static void rtl931x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 v, w, x, y; - /* Read VLAN table (3) via register 0 */ - struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 3); - - rtl_table_read(r, vlan); - v = sw_r32(rtl_table_data(r, 0)); - w = sw_r32(rtl_table_data(r, 1)); - x = sw_r32(rtl_table_data(r, 2)); - y = sw_r32(rtl_table_data(r, 3)); - rtl_table_release(r); - - pr_debug("VLAN_READ %d: %08x %08x %08x %08x\n", vlan, v, w, x, y); - info->tagged_ports = ((u64) v) << 25 | (w >> 7); - info->profile_id = (x >> 16) & 0xf; - info->fid = w & 0x7f; /* AKA MSTI depending on context */ - info->hash_uc_fid = !!(x & BIT(31)); - info->hash_mc_fid = !!(x & BIT(30)); - info->if_id = (x >> 20) & 0x3ff; - info->profile_id = (x >> 16) & 0xf; - info->multicast_grp_mask = x & 0xffff; - if (x & BIT(31)) - info->l2_tunnel_list_id = y >> 18; - else - info->l2_tunnel_list_id = -1; - pr_debug("%s read tagged %016llx, profile-id %d, uc %d, mc %d, intf-id %d\n", __func__, - info->tagged_ports, info->profile_id, info->hash_uc_fid, info->hash_mc_fid, - info->if_id); - - /* Read UNTAG table via table register 3 */ - r = rtl_table_get(RTL9310_TBL_3, 0); - rtl_table_read(r, vlan); - v = ((u64)sw_r32(rtl_table_data(r, 0))) << 25; - v |= sw_r32(rtl_table_data(r, 1)) >> 7; - rtl_table_release(r); - - info->untagged_ports = v; -} - -static void rtl931x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info) -{ - u32 v, w, x, y; - /* Access VLAN table (1) via register 0 */ - struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 3); - - v = info->tagged_ports >> 25; - w = (info->tagged_ports & 0x1fffff) << 7; - w |= info->fid & 0x7f; - x = info->hash_uc_fid ? BIT(31) : 0; - x |= info->hash_mc_fid ? BIT(30) : 0; - x |= info->if_id & 0x3ff << 20; - x |= (info->profile_id & 0xf) << 16; - x |= info->multicast_grp_mask & 0xffff; - if (info->l2_tunnel_list_id >= 0) { - y = info->l2_tunnel_list_id << 18; - y |= BIT(31); - } else { - y = 0; - } - - sw_w32(v, rtl_table_data(r, 0)); - sw_w32(w, rtl_table_data(r, 1)); - sw_w32(x, rtl_table_data(r, 2)); - sw_w32(y, rtl_table_data(r, 3)); - - rtl_table_write(r, vlan); - rtl_table_release(r); -} - -static void rtl931x_vlan_set_untagged(u32 vlan, u64 portmask) -{ - struct table_reg *r = rtl_table_get(RTL9310_TBL_3, 0); - - rtl839x_set_port_reg_be(portmask << 7, rtl_table_data(r, 0)); - rtl_table_write(r, vlan); - rtl_table_release(r); -} - -static inline int rtl931x_mac_force_mode_ctrl(int p) -{ - return RTL931X_MAC_FORCE_MODE_CTRL + (p << 2); -} - -static inline int rtl931x_mac_link_spd_sts(int p) -{ - return RTL931X_MAC_LINK_SPD_STS + (((p >> 3) << 2)); -} - -static inline int rtl931x_mac_port_ctrl(int p) -{ - return RTL931X_MAC_L2_PORT_CTRL + (p << 7); -} - -static inline int rtl931x_l2_port_new_salrn(int p) -{ - return RTL931X_L2_PORT_NEW_SALRN(p); -} - -static inline int rtl931x_l2_port_new_sa_fwd(int p) -{ - return RTL931X_L2_PORT_NEW_SA_FWD(p); -} - -irqreturn_t rtl931x_switch_irq(int irq, void *dev_id) -{ - struct dsa_switch *ds = dev_id; - u32 status = sw_r32(RTL931X_ISR_GLB_SRC); - u64 ports = rtl839x_get_port_reg_le(RTL931X_ISR_PORT_LINK_STS_CHG); - u64 link; - - /* Clear status */ - rtl839x_set_port_reg_le(ports, RTL931X_ISR_PORT_LINK_STS_CHG); - pr_debug("RTL931X Link change: status: %x, ports %016llx\n", status, ports); - - link = rtl839x_get_port_reg_le(RTL931X_MAC_LINK_STS); - /* Must re-read this to get correct status */ - link = rtl839x_get_port_reg_le(RTL931X_MAC_LINK_STS); - pr_debug("RTL931X Link change: status: %x, link status %016llx\n", status, link); - - for (int i = 0; i < 56; i++) { - if (ports & BIT_ULL(i)) { - if (link & BIT_ULL(i)) { - pr_info("%s port %d up\n", __func__, i); - dsa_port_phylink_mac_change(ds, i, true); - } else { - pr_info("%s port %d down\n", __func__, i); - dsa_port_phylink_mac_change(ds, i, false); - } - } - } - - return IRQ_HANDLED; -} - -int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val) -{ - u32 v; - int err = 0; - - val &= 0xffff; - if (port > 63 || page > 4095 || reg > 31) - return -ENOTSUPP; - - mutex_lock(&smi_lock); - pr_debug("%s: writing to phy %d %d %d %d\n", __func__, port, page, reg, val); - /* Clear both port registers */ - sw_w32(0, RTL931X_SMI_INDRT_ACCESS_CTRL_2); - sw_w32(0, RTL931X_SMI_INDRT_ACCESS_CTRL_2 + 4); - sw_w32_mask(0, BIT(port % 32), RTL931X_SMI_INDRT_ACCESS_CTRL_2 + (port / 32) * 4); - - sw_w32_mask(0xffff, val, RTL931X_SMI_INDRT_ACCESS_CTRL_3); - - v = reg << 6 | page << 11 ; - sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0); - - sw_w32(0x1ff, RTL931X_SMI_INDRT_ACCESS_CTRL_1); - - v |= BIT(4) | 1; /* Write operation and execute */ - sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0); - - do { - } while (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0) & 0x1); - - if (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0) & 0x2) - err = -EIO; - - mutex_unlock(&smi_lock); - - return err; -} - -int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val) -{ - u32 v; - - if (port > 63 || page > 4095 || reg > 31) - return -ENOTSUPP; - - mutex_lock(&smi_lock); - - sw_w32(port << 5, RTL931X_SMI_INDRT_ACCESS_BC_PHYID_CTRL); - - v = reg << 6 | page << 11 | 1; - sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0); - - do { - } while (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0) & 0x1); - - v = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0); - *val = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_3); - *val = (*val & 0xffff0000) >> 16; - - pr_debug("%s: port %d, page: %d, reg: %x, val: %x, v: %08x\n", - __func__, port, page, reg, *val, v); - - mutex_unlock(&smi_lock); - - return 0; -} - -/* Read an mmd register of the PHY */ -int rtl931x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val) -{ - int err = 0; - u32 v; - /* Select PHY register type - * If select 1G/10G MMD register type, registers EXT_PAGE, MAIN_PAGE and REG settings are don’t care. - * 0x0 Normal register (Clause 22) - * 0x1: 1G MMD register (MMD via Clause 22 registers 13 and 14) - * 0x2: 10G MMD register (MMD via Clause 45) - */ - int type = 2; - - mutex_lock(&smi_lock); - - /* Set PHY to access via port-number */ - sw_w32(port << 5, RTL931X_SMI_INDRT_ACCESS_BC_PHYID_CTRL); - - /* Set MMD device number and register to write to */ - sw_w32(devnum << 16 | regnum, RTL931X_SMI_INDRT_ACCESS_MMD_CTRL); - - v = type << 2 | BIT(0); /* MMD-access-type | EXEC */ - sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0); - - do { - v = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0); - } while (v & BIT(0)); - - /* Check for error condition */ - if (v & BIT(1)) - err = -EIO; - - *val = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_3) >> 16; - - pr_debug("%s: port %d, dev: %x, regnum: %x, val: %x (err %d)\n", __func__, - port, devnum, regnum, *val, err); - - mutex_unlock(&smi_lock); - - return err; -} - -/* Write to an mmd register of the PHY */ -int rtl931x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val) -{ - int err = 0; - u32 v; - int type = 2; - u64 pm; - - mutex_lock(&smi_lock); - - /* Set PHY to access via port-mask */ - pm = (u64)1 << port; - sw_w32((u32)pm, RTL931X_SMI_INDRT_ACCESS_CTRL_2); - sw_w32((u32)(pm >> 32), RTL931X_SMI_INDRT_ACCESS_CTRL_2 + 4); - - /* Set data to write */ - sw_w32_mask(0xffff, val, RTL931X_SMI_INDRT_ACCESS_CTRL_3); - - /* Set MMD device number and register to write to */ - sw_w32(devnum << 16 | regnum, RTL931X_SMI_INDRT_ACCESS_MMD_CTRL); - - v = BIT(4) | type << 2 | BIT(0); /* WRITE | MMD-access-type | EXEC */ - sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0); - - do { - v = sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0); - } while (v & BIT(0)); - - pr_debug("%s: port %d, dev: %x, regnum: %x, val: %x (err %d)\n", __func__, - port, devnum, regnum, val, err); - mutex_unlock(&smi_lock); - - return err; -} - -void rtl931x_print_matrix(void) -{ - volatile u64 *ptr = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0); - - for (int i = 0; i < 52; i += 4) - pr_info("> %16llx %16llx %16llx %16llx\n", - ptr[i + 0], ptr[i + 1], ptr[i + 2], ptr[i + 3]); - pr_info("CPU_PORT> %16llx\n", ptr[52]); -} - -void rtl931x_set_receive_management_action(int port, rma_ctrl_t type, action_type_t action) -{ - u32 value = 0; - - /* hack for value mapping */ - if (type == GRATARP && action == COPY2CPU) - action = TRAP2MASTERCPU; - - switch(action) { - case FORWARD: - value = 0; - break; - case DROP: - value = 1; - break; - case TRAP2CPU: - value = 2; - break; - case TRAP2MASTERCPU: - value = 3; - break; - case FLOODALL: - value = 4; - break; - default: - break; - } - - switch(type) { - case BPDU: - sw_w32_mask(7 << ((port % 10) * 3), value << ((port % 10) * 3), RTL931X_RMA_BPDU_CTRL + ((port / 10) << 2)); - break; - case PTP: - /* udp */ - sw_w32_mask(3 << 2, value << 2, RTL931X_RMA_PTP_CTRL + (port << 2)); - /* eth2 */ - sw_w32_mask(3, value, RTL931X_RMA_PTP_CTRL + (port << 2)); - break; - case PTP_UDP: - sw_w32_mask(3 << 2, value << 2, RTL931X_RMA_PTP_CTRL + (port << 2)); - break; - case PTP_ETH2: - sw_w32_mask(3, value, RTL931X_RMA_PTP_CTRL + (port << 2)); - break; - case LLDP: - sw_w32_mask(7 << ((port % 10) * 3), value << ((port % 10) * 3), RTL931X_RMA_LLDP_CTRL + ((port / 10) << 2)); - break; - case EAPOL: - sw_w32_mask(7 << ((port % 10) * 3), value << ((port % 10) * 3), RTL931X_RMA_EAPOL_CTRL + ((port / 10) << 2)); - break; - case GRATARP: - sw_w32_mask(3 << ((port & 0xf) << 1), value << ((port & 0xf) << 1), RTL931X_TRAP_ARP_GRAT_PORT_ACT + ((port >> 4) << 2)); - break; - } -} - -u64 rtl931x_traffic_get(int source) -{ - u32 v; - struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 6); - - rtl_table_read(r, source); - v = sw_r32(rtl_table_data(r, 0)); - rtl_table_release(r); - v = v >> 3; - - return v; -} - -/* Enable traffic between a source port and a destination port matrix */ -void rtl931x_traffic_set(int source, u64 dest_matrix) -{ - struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 6); - - sw_w32((dest_matrix << 3), rtl_table_data(r, 0)); - rtl_table_write(r, source); - rtl_table_release(r); -} - -void rtl931x_traffic_enable(int source, int dest) -{ - struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 6); - rtl_table_read(r, source); - sw_w32_mask(0, BIT(dest + 3), rtl_table_data(r, 0)); - rtl_table_write(r, source); - rtl_table_release(r); -} - -void rtl931x_traffic_disable(int source, int dest) -{ - struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 6); - rtl_table_read(r, source); - sw_w32_mask(BIT(dest + 3), 0, rtl_table_data(r, 0)); - rtl_table_write(r, source); - rtl_table_release(r); -} - -static u64 rtl931x_l2_hash_seed(u64 mac, u32 vid) -{ - u64 v = vid; - - v <<= 48; - v |= mac; - - return v; -} - -/* Calculate both the block 0 and the block 1 hash by applyingthe same hash - * algorithm as the one used currently by the ASIC to the seed, and return - * both hashes in the lower and higher word of the return value since only 12 bit of - * the hash are significant. - */ -static u32 rtl931x_l2_hash_key(struct rtl838x_switch_priv *priv, u64 seed) -{ - u32 h, h0, h1, h2, h3, h4, k0, k1; - - h0 = seed & 0xfff; - h1 = (seed >> 12) & 0xfff; - h2 = (seed >> 24) & 0xfff; - h3 = (seed >> 36) & 0xfff; - h4 = (seed >> 48) & 0xfff; - h4 = ((h4 & 0x7) << 9) | ((h4 >> 3) & 0x1ff); - k0 = h0 ^ h1 ^ h2 ^ h3 ^ h4; - - h0 = seed & 0xfff; - h0 = ((h0 & 0x1ff) << 3) | ((h0 >> 9) & 0x7); - h1 = (seed >> 12) & 0xfff; - h1 = ((h1 & 0x3f) << 6) | ((h1 >> 6) & 0x3f); - h2 = (seed >> 24) & 0xfff; - h3 = (seed >> 36) & 0xfff; - h3 = ((h3 & 0x3f) << 6) | ((h3 >> 6) & 0x3f); - h4 = (seed >> 48) & 0xfff; - k1 = h0 ^ h1 ^ h2 ^ h3 ^ h4; - - /* Algorithm choice for block 0 */ - if (sw_r32(RTL931X_L2_CTRL) & BIT(0)) - h = k1; - else - h = k0; - - /* Algorithm choice for block 1 - * Since k0 and k1 are < 4096, adding 4096 will offset the hash into the second - * half of hash-space - * 4096 is in fact the hash-table size 32768 divided by 4 hashes per bucket - * divided by 2 to divide the hash space in 2 - */ - if (sw_r32(RTL931X_L2_CTRL) & BIT(1)) - h |= (k1 + 4096) << 16; - else - h |= (k0 + 4096) << 16; - - return h; -} - -/* Fills an L2 entry structure from the SoC registers */ -static void rtl931x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) -{ - pr_debug("In %s valid?\n", __func__); - e->valid = !!(r[0] & BIT(31)); - if (!e->valid) - return; - - pr_debug("%s: entry valid, raw: %08x %08x %08x %08x\n", __func__, r[0], r[1], r[2], r[3]); - e->is_ip_mc = false; - e->is_ipv6_mc = false; - - e->mac[0] = r[0] >> 8; - e->mac[1] = r[0]; - e->mac[2] = r[1] >> 24; - e->mac[3] = r[1] >> 16; - e->mac[4] = r[1] >> 8; - e->mac[5] = r[1]; - - e->is_open_flow = !!(r[0] & BIT(30)); - e->is_pe_forward = !!(r[0] & BIT(29)); - e->next_hop = !!(r[2] & BIT(30)); - e->rvid = (r[0] >> 16) & 0xfff; - - /* Is it a unicast entry? check multicast bit */ - if (!(e->mac[0] & 1)) { - e->type = L2_UNICAST; - e->is_l2_tunnel = !!(r[2] & BIT(31)); - e->is_static = !!(r[2] & BIT(13)); - e->port = (r[2] >> 19) & 0x3ff; - /* Check for trunk port */ - if (r[2] & BIT(29)) { - e->is_trunk = true; - e->stack_dev = (e->port >> 9) & 1; - e->trunk = e->port & 0x3f; - } else { - e->is_trunk = false; - e->stack_dev = (e->port >> 6) & 0xf; - e->port = e->port & 0x3f; - } - - e->block_da = !!(r[2] & BIT(14)); - e->block_sa = !!(r[2] & BIT(15)); - e->suspended = !!(r[2] & BIT(12)); - e->age = (r[2] >> 16) & 3; - - /* the UC_VID field in hardware is used for the VID or for the route id */ - if (e->next_hop) { - e->nh_route_id = r[2] & 0x7ff; - e->vid = 0; - } else { - e->vid = r[2] & 0xfff; - e->nh_route_id = 0; - } - if (e->is_l2_tunnel) - e->l2_tunnel_id = ((r[2] & 0xff) << 4) | (r[3] >> 28); - /* TODO: Implement VLAN conversion */ - } else { - e->type = L2_MULTICAST; - e->is_local_forward = !!(r[2] & BIT(31)); - e->is_remote_forward = !!(r[2] & BIT(17)); - e->mc_portmask_index = (r[2] >> 18) & 0xfff; - e->l2_tunnel_list_id = (r[2] >> 4) & 0x1fff; - } -} - -/* Fills the 3 SoC table registers r[] with the information of in the rtl838x_l2_entry */ -static void rtl931x_fill_l2_row(u32 r[], struct rtl838x_l2_entry *e) -{ - u32 port; - - if (!e->valid) { - r[0] = r[1] = r[2] = 0; - return; - } - - r[2] = BIT(31); /* Set valid bit */ - - r[0] = ((u32)e->mac[0]) << 24 | - ((u32)e->mac[1]) << 16 | - ((u32)e->mac[2]) << 8 | - ((u32)e->mac[3]); - r[1] = ((u32)e->mac[4]) << 24 | - ((u32)e->mac[5]) << 16; - - r[2] |= e->next_hop ? BIT(12) : 0; - - if (e->type == L2_UNICAST) { - r[2] |= e->is_static ? BIT(14) : 0; - r[1] |= e->rvid & 0xfff; - r[2] |= (e->port & 0x3ff) << 20; - if (e->is_trunk) { - r[2] |= BIT(30); - port = e->stack_dev << 9 | (e->port & 0x3f); - } else { - port = (e->stack_dev & 0xf) << 6; - port |= e->port & 0x3f; - } - r[2] |= port << 20; - r[2] |= e->block_da ? BIT(15) : 0; - r[2] |= e->block_sa ? BIT(17) : 0; - r[2] |= e->suspended ? BIT(13) : 0; - r[2] |= (e->age & 0x3) << 17; - /* the UC_VID field in hardware is used for the VID or for the route id */ - if (e->next_hop) - r[2] |= e->nh_route_id & 0x7ff; - else - r[2] |= e->vid & 0xfff; - } else { /* L2_MULTICAST */ - r[2] |= (e->mc_portmask_index & 0x3ff) << 16; - r[2] |= e->mc_mac_index & 0x7ff; - } -} - -/* Read an L2 UC or MC entry out of a hash bucket of the L2 forwarding table - * hash is the id of the bucket and pos is the position of the entry in that bucket - * The data read from the SoC is filled into rtl838x_l2_entry - */ -static u64 rtl931x_read_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) -{ - u32 r[4]; - struct table_reg *q = rtl_table_get(RTL9310_TBL_0, 0); - u32 idx; - u64 mac; - u64 seed; - - pr_debug("%s: hash %08x, pos: %d\n", __func__, hash, pos); - - /* On the RTL93xx, 2 different hash algorithms are used making it a total of - * 8 buckets that need to be searched, 4 for each hash-half - * Use second hash space when bucket is between 4 and 8 - */ - if (pos >= 4) { - pos -= 4; - hash >>= 16; - } else { - hash &= 0xffff; - } - - idx = (0 << 14) | (hash << 2) | pos; /* Search SRAM, with hash and at pos in bucket */ - pr_debug("%s: NOW hash %08x, pos: %d\n", __func__, hash, pos); - - rtl_table_read(q, idx); - for (int i = 0; i < 4; i++) - r[i] = sw_r32(rtl_table_data(q, i)); - - rtl_table_release(q); - - rtl931x_fill_l2_entry(r, e); - - pr_debug("%s: valid: %d, nh: %d\n", __func__, e->valid, e->next_hop); - if (!e->valid) - return 0; - - mac = ((u64)e->mac[0]) << 40 | - ((u64)e->mac[1]) << 32 | - ((u64)e->mac[2]) << 24 | - ((u64)e->mac[3]) << 16 | - ((u64)e->mac[4]) << 8 | - ((u64)e->mac[5]); - - seed = rtl931x_l2_hash_seed(mac, e->rvid); - pr_debug("%s: mac %016llx, seed %016llx\n", __func__, mac, seed); - - /* return vid with concatenated mac as unique id */ - return seed; -} - -static u64 rtl931x_read_cam(int idx, struct rtl838x_l2_entry *e) -{ - return 0; -} - -static void rtl931x_write_cam(int idx, struct rtl838x_l2_entry *e) -{ -} - -static void rtl931x_write_l2_entry_using_hash(u32 hash, u32 pos, struct rtl838x_l2_entry *e) -{ - u32 r[4]; - struct table_reg *q = rtl_table_get(RTL9310_TBL_0, 0); - u32 idx = (0 << 14) | (hash << 2) | pos; /* Access SRAM, with hash and at pos in bucket */ - - pr_info("%s: hash %d, pos %d\n", __func__, hash, pos); - pr_info("%s: index %d -> mac %02x:%02x:%02x:%02x:%02x:%02x\n", __func__, idx, - e->mac[0], e->mac[1], e->mac[2], e->mac[3],e->mac[4],e->mac[5]); - - rtl931x_fill_l2_row(r, e); - pr_info("%s: %d: %08x %08x %08x\n", __func__, idx, r[0], r[1], r[2]); - - for (int i = 0; i < 4; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); -} - -static void rtl931x_vlan_fwd_on_inner(int port, bool is_set) -{ - /* Always set all tag modes to fwd based on either inner or outer tag */ - if (is_set) - sw_w32_mask(0xf, 0, RTL931X_VLAN_PORT_FWD + (port << 2)); - else - sw_w32_mask(0, 0xf, RTL931X_VLAN_PORT_FWD + (port << 2)); -} - -static void rtl931x_vlan_profile_setup(int profile) -{ - u32 p[7]; - - pr_info("In %s\n", __func__); - - if (profile > 15) - return; - - p[0] = sw_r32(RTL931X_VLAN_PROFILE_SET(profile)); - - /* Enable routing of Ipv4/6 Unicast and IPv4/6 Multicast traffic */ - /* p[0] |= BIT(17) | BIT(16) | BIT(13) | BIT(12); */ - p[0] |= 0x3 << 11; /* COPY2CPU */ - - p[1] = 0x1FFFFFF; /* L2 unknwon MC flooding portmask all ports, including the CPU-port */ - p[2] = 0xFFFFFFFF; - p[3] = 0x1FFFFFF; /* IPv4 unknwon MC flooding portmask */ - p[4] = 0xFFFFFFFF; - p[5] = 0x1FFFFFF; /* IPv6 unknwon MC flooding portmask */ - p[6] = 0xFFFFFFFF; - - for (int i = 0; i < 7; i++) - sw_w32(p[i], RTL931X_VLAN_PROFILE_SET(profile) + i * 4); - pr_info("Leaving %s\n", __func__); -} - -static void rtl931x_l2_learning_setup(void) -{ - /* Portmask for flooding broadcast traffic */ - rtl839x_set_port_reg_be(0x1FFFFFFFFFFFFFF, RTL931X_L2_BC_FLD_PMSK); - - /* Portmask for flooding unicast traffic with unknown destination */ - rtl839x_set_port_reg_be(0x1FFFFFFFFFFFFFF, RTL931X_L2_UNKN_UC_FLD_PMSK); - - /* Limit learning to maximum: 64k entries, after that just flood (bits 0-2) */ - sw_w32((0xffff << 3) | FORWARD, RTL931X_L2_LRN_CONSTRT_CTRL); -} - -static u64 rtl931x_read_mcast_pmask(int idx) -{ - u64 portmask; - /* Read MC_PMSK (2) via register RTL9310_TBL_0 */ - struct table_reg *q = rtl_table_get(RTL9310_TBL_0, 2); - - rtl_table_read(q, idx); - portmask = sw_r32(rtl_table_data(q, 0)); - portmask <<= 32; - portmask |= sw_r32(rtl_table_data(q, 1)); - portmask >>= 7; - rtl_table_release(q); - - pr_debug("%s: Index idx %d has portmask %016llx\n", __func__, idx, portmask); - - return portmask; -} - -static void rtl931x_write_mcast_pmask(int idx, u64 portmask) -{ - u64 pm = portmask; - - /* Access MC_PMSK (2) via register RTL9310_TBL_0 */ - struct table_reg *q = rtl_table_get(RTL9310_TBL_0, 2); - - pr_debug("%s: Index idx %d has portmask %016llx\n", __func__, idx, pm); - pm <<= 7; - sw_w32((u32)(pm >> 32), rtl_table_data(q, 0)); - sw_w32((u32)pm, rtl_table_data(q, 1)); - rtl_table_write(q, idx); - rtl_table_release(q); -} - - -static int rtl931x_set_ageing_time(unsigned long msec) -{ - int t = sw_r32(RTL931X_L2_AGE_CTRL); - - t &= 0x1FFFFF; - t = (t * 8) / 10; - pr_debug("L2 AGING time: %d sec\n", t); - - t = (msec / 100 + 7) / 8; - t = t > 0x1FFFFF ? 0x1FFFFF : t; - sw_w32_mask(0x1FFFFF, t, RTL931X_L2_AGE_CTRL); - pr_debug("Dynamic aging for ports: %x\n", sw_r32(RTL931X_L2_PORT_AGE_CTRL)); - - return 0; -} -void rtl931x_sw_init(struct rtl838x_switch_priv *priv) -{ -/* rtl931x_sds_init(priv); */ -} - -static void rtl931x_pie_lookup_enable(struct rtl838x_switch_priv *priv, int index) -{ - int block = index / PIE_BLOCK_SIZE; - - sw_w32_mask(0, BIT(block), RTL931X_PIE_BLK_LOOKUP_CTRL); -} - -/* Fills the data in the intermediate representation in the pie_rule structure - * into a data field for a given template field field_type - * TODO: This function looks very similar to the function of the rtl9300, but - * since it uses the physical template_field_id, which are different for each - * SoC and there are other field types, it is actually not. If we would also use - * an intermediate representation for a field type, we would could have one - * pie_data_fill function for all SoCs, provided we have also for each SoC a - * function to map between physical and intermediate field type - */ -int rtl931x_pie_data_fill(enum template_field_id field_type, struct pie_rule *pr, u16 *data, u16 *data_m) -{ - *data = *data_m = 0; - - switch (field_type) { - case TEMPLATE_FIELD_SPM0: - *data = pr->spm; - *data_m = pr->spm_m; - break; - case TEMPLATE_FIELD_SPM1: - *data = pr->spm >> 16; - *data_m = pr->spm_m >> 16; - break; - case TEMPLATE_FIELD_OTAG: - *data = pr->otag; - *data_m = pr->otag_m; - break; - case TEMPLATE_FIELD_SMAC0: - *data = pr->smac[4]; - *data = (*data << 8) | pr->smac[5]; - *data_m = pr->smac_m[4]; - *data_m = (*data_m << 8) | pr->smac_m[5]; - break; - case TEMPLATE_FIELD_SMAC1: - *data = pr->smac[2]; - *data = (*data << 8) | pr->smac[3]; - *data_m = pr->smac_m[2]; - *data_m = (*data_m << 8) | pr->smac_m[3]; - break; - case TEMPLATE_FIELD_SMAC2: - *data = pr->smac[0]; - *data = (*data << 8) | pr->smac[1]; - *data_m = pr->smac_m[0]; - *data_m = (*data_m << 8) | pr->smac_m[1]; - break; - case TEMPLATE_FIELD_DMAC0: - *data = pr->dmac[4]; - *data = (*data << 8) | pr->dmac[5]; - *data_m = pr->dmac_m[4]; - *data_m = (*data_m << 8) | pr->dmac_m[5]; - break; - case TEMPLATE_FIELD_DMAC1: - *data = pr->dmac[2]; - *data = (*data << 8) | pr->dmac[3]; - *data_m = pr->dmac_m[2]; - *data_m = (*data_m << 8) | pr->dmac_m[3]; - break; - case TEMPLATE_FIELD_DMAC2: - *data = pr->dmac[0]; - *data = (*data << 8) | pr->dmac[1]; - *data_m = pr->dmac_m[0]; - *data_m = (*data_m << 8) | pr->dmac_m[1]; - break; - case TEMPLATE_FIELD_ETHERTYPE: - *data = pr->ethertype; - *data_m = pr->ethertype_m; - break; - case TEMPLATE_FIELD_ITAG: - *data = pr->itag; - *data_m = pr->itag_m; - break; - case TEMPLATE_FIELD_SIP0: - if (pr->is_ipv6) { - *data = pr->sip6.s6_addr16[7]; - *data_m = pr->sip6_m.s6_addr16[7]; - } else { - *data = pr->sip; - *data_m = pr->sip_m; - } - break; - case TEMPLATE_FIELD_SIP1: - if (pr->is_ipv6) { - *data = pr->sip6.s6_addr16[6]; - *data_m = pr->sip6_m.s6_addr16[6]; - } else { - *data = pr->sip >> 16; - *data_m = pr->sip_m >> 16; - } - break; - case TEMPLATE_FIELD_SIP2: - case TEMPLATE_FIELD_SIP3: - case TEMPLATE_FIELD_SIP4: - case TEMPLATE_FIELD_SIP5: - case TEMPLATE_FIELD_SIP6: - case TEMPLATE_FIELD_SIP7: - *data = pr->sip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; - *data_m = pr->sip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_SIP2)]; - break; - case TEMPLATE_FIELD_DIP0: - if (pr->is_ipv6) { - *data = pr->dip6.s6_addr16[7]; - *data_m = pr->dip6_m.s6_addr16[7]; - } else { - *data = pr->dip; - *data_m = pr->dip_m; - } - break; - case TEMPLATE_FIELD_DIP1: - if (pr->is_ipv6) { - *data = pr->dip6.s6_addr16[6]; - *data_m = pr->dip6_m.s6_addr16[6]; - } else { - *data = pr->dip >> 16; - *data_m = pr->dip_m >> 16; - } - break; - case TEMPLATE_FIELD_DIP2: - case TEMPLATE_FIELD_DIP3: - case TEMPLATE_FIELD_DIP4: - case TEMPLATE_FIELD_DIP5: - case TEMPLATE_FIELD_DIP6: - case TEMPLATE_FIELD_DIP7: - *data = pr->dip6.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; - *data_m = pr->dip6_m.s6_addr16[5 - (field_type - TEMPLATE_FIELD_DIP2)]; - break; - case TEMPLATE_FIELD_IP_TOS_PROTO: - *data = pr->tos_proto; - *data_m = pr->tos_proto_m; - break; - case TEMPLATE_FIELD_L4_SPORT: - *data = pr->sport; - *data_m = pr->sport_m; - break; - case TEMPLATE_FIELD_L4_DPORT: - *data = pr->dport; - *data_m = pr->dport_m; - break; - case TEMPLATE_FIELD_DSAP_SSAP: - *data = pr->dsap_ssap; - *data_m = pr->dsap_ssap_m; - break; - case TEMPLATE_FIELD_TCP_INFO: - *data = pr->tcp_info; - *data_m = pr->tcp_info_m; - break; - case TEMPLATE_FIELD_RANGE_CHK: - pr_info("TEMPLATE_FIELD_RANGE_CHK: not configured\n"); - break; - default: - pr_info("%s: unknown field %d\n", __func__, field_type); - return -1; - } - - return 0; -} - -/* Reads the intermediate representation of the templated match-fields of the - * PIE rule in the pie_rule structure and fills in the raw data fields in the - * raw register space r[]. - * The register space configuration size is identical for the RTL8380/90 and RTL9300, - * however the RTL931X has 2 more registers / fields and the physical field-ids are different - * on all SoCs - * On the RTL9300 the mask fields are not word-aligend! - */ -static void rtl931x_write_pie_templated(u32 r[], struct pie_rule *pr, enum template_field_id t[]) -{ - for (int i = 0; i < N_FIXED_FIELDS; i++) { - u16 data, data_m; - - rtl931x_pie_data_fill(t[i], pr, &data, &data_m); - - /* On the RTL9300, the mask fields are not word aligned! */ - if (!(i % 2)) { - r[5 - i / 2] = data; - r[12 - i / 2] |= ((u32)data_m << 8); - } else { - r[5 - i / 2] |= ((u32)data) << 16; - r[12 - i / 2] |= ((u32)data_m) << 24; - r[11 - i / 2] |= ((u32)data_m) >> 8; - } - } -} - -// Currently unused -// static void rtl931x_read_pie_fixed_fields(u32 r[], struct pie_rule *pr) -// { -// pr->mgnt_vlan = r[7] & BIT(31); -// if (pr->phase == PHASE_IACL) -// pr->dmac_hit_sw = r[7] & BIT(30); -// else /* TODO: EACL/VACL phase handling */ -// pr->content_too_deep = r[7] & BIT(30); -// pr->not_first_frag = r[7] & BIT(29); -// pr->frame_type_l4 = (r[7] >> 26) & 7; -// pr->frame_type = (r[7] >> 24) & 3; -// pr->otag_fmt = (r[7] >> 23) & 1; -// pr->itag_fmt = (r[7] >> 22) & 1; -// pr->otag_exist = (r[7] >> 21) & 1; -// pr->itag_exist = (r[7] >> 20) & 1; -// pr->frame_type_l2 = (r[7] >> 18) & 3; -// pr->igr_normal_port = (r[7] >> 17) & 1; -// pr->tid = (r[7] >> 16) & 1; - -// pr->mgnt_vlan_m = r[14] & BIT(15); -// if (pr->phase == PHASE_IACL) -// pr->dmac_hit_sw_m = r[14] & BIT(14); -// else -// pr->content_too_deep_m = r[14] & BIT(14); -// pr->not_first_frag_m = r[14] & BIT(13); -// pr->frame_type_l4_m = (r[14] >> 10) & 7; -// pr->frame_type_m = (r[14] >> 8) & 3; -// pr->otag_fmt_m = r[14] & BIT(7); -// pr->itag_fmt_m = r[14] & BIT(6); -// pr->otag_exist_m = r[14] & BIT(5); -// pr->itag_exist_m = r[14] & BIT (4); -// pr->frame_type_l2_m = (r[14] >> 2) & 3; -// pr->igr_normal_port_m = r[14] & BIT(1); -// pr->tid_m = r[14] & 1; - -// pr->valid = r[15] & BIT(31); -// pr->cond_not = r[15] & BIT(30); -// pr->cond_and1 = r[15] & BIT(29); -// pr->cond_and2 = r[15] & BIT(28); -// } - -static void rtl931x_write_pie_fixed_fields(u32 r[], struct pie_rule *pr) -{ - r[7] |= pr->mgnt_vlan ? BIT(31) : 0; - if (pr->phase == PHASE_IACL) - r[7] |= pr->dmac_hit_sw ? BIT(30) : 0; - else - r[7] |= pr->content_too_deep ? BIT(30) : 0; - r[7] |= pr->not_first_frag ? BIT(29) : 0; - r[7] |= ((u32) (pr->frame_type_l4 & 0x7)) << 26; - r[7] |= ((u32) (pr->frame_type & 0x3)) << 24; - r[7] |= pr->otag_fmt ? BIT(23) : 0; - r[7] |= pr->itag_fmt ? BIT(22) : 0; - r[7] |= pr->otag_exist ? BIT(21) : 0; - r[7] |= pr->itag_exist ? BIT(20) : 0; - r[7] |= ((u32) (pr->frame_type_l2 & 0x3)) << 18; - r[7] |= pr->igr_normal_port ? BIT(17) : 0; - r[7] |= ((u32) (pr->tid & 0x1)) << 16; - - r[14] |= pr->mgnt_vlan_m ? BIT(15) : 0; - if (pr->phase == PHASE_IACL) - r[14] |= pr->dmac_hit_sw_m ? BIT(14) : 0; - else - r[14] |= pr->content_too_deep_m ? BIT(14) : 0; - r[14] |= pr->not_first_frag_m ? BIT(13) : 0; - r[14] |= ((u32) (pr->frame_type_l4_m & 0x7)) << 10; - r[14] |= ((u32) (pr->frame_type_m & 0x3)) << 8; - r[14] |= pr->otag_fmt_m ? BIT(7) : 0; - r[14] |= pr->itag_fmt_m ? BIT(6) : 0; - r[14] |= pr->otag_exist_m ? BIT(5) : 0; - r[14] |= pr->itag_exist_m ? BIT(4) : 0; - r[14] |= ((u32) (pr->frame_type_l2_m & 0x3)) << 2; - r[14] |= pr->igr_normal_port_m ? BIT(1) : 0; - r[14] |= (u32) (pr->tid_m & 0x1); - - r[15] |= pr->valid ? BIT(31) : 0; - r[15] |= pr->cond_not ? BIT(30) : 0; - r[15] |= pr->cond_and1 ? BIT(29) : 0; - r[15] |= pr->cond_and2 ? BIT(28) : 0; -} - -static void rtl931x_write_pie_action(u32 r[], struct pie_rule *pr) -{ - /* Either drop or forward */ - if (pr->drop) { - r[15] |= BIT(11) | BIT(12) | BIT(13); /* Do Green, Yellow and Red drops */ - /* Actually DROP, not PERMIT in Green / Yellow / Red */ - r[16] |= BIT(27) | BIT(28) | BIT(29); - } else { - r[15] |= pr->fwd_sel ? BIT(14) : 0; - r[16] |= pr->fwd_act << 24; - r[16] |= BIT(21); /* We overwrite any drop */ - } - if (pr->phase == PHASE_VACL) - r[16] |= pr->fwd_sa_lrn ? BIT(22) : 0; - r[15] |= pr->bypass_sel ? BIT(10) : 0; - r[15] |= pr->nopri_sel ? BIT(21) : 0; - r[15] |= pr->tagst_sel ? BIT(20) : 0; - r[15] |= pr->ovid_sel ? BIT(18) : 0; - r[15] |= pr->ivid_sel ? BIT(16) : 0; - r[15] |= pr->meter_sel ? BIT(27) : 0; - r[15] |= pr->mir_sel ? BIT(15) : 0; - r[15] |= pr->log_sel ? BIT(26) : 0; - - r[16] |= ((u32)(pr->fwd_data & 0xfff)) << 9; -/* r[15] |= pr->log_octets ? BIT(31) : 0; */ - r[15] |= (u32)(pr->meter_data) >> 2; - r[16] |= (((u32)(pr->meter_data) >> 7) & 0x3) << 29; - - r[16] |= ((u32)(pr->ivid_act & 0x3)) << 21; - r[15] |= ((u32)(pr->ivid_data & 0xfff)) << 9; - r[16] |= ((u32)(pr->ovid_act & 0x3)) << 30; - r[16] |= ((u32)(pr->ovid_data & 0xfff)) << 16; - r[16] |= ((u32)(pr->mir_data & 0x3)) << 6; - r[17] |= ((u32)(pr->tagst_data & 0xf)) << 28; - r[17] |= ((u32)(pr->nopri_data & 0x7)) << 25; - r[17] |= pr->bypass_ibc_sc ? BIT(16) : 0; -} - -void rtl931x_pie_rule_dump_raw(u32 r[]) -{ - pr_info("Raw IACL table entry:\n"); - pr_info("r 0 - 7: %08x %08x %08x %08x %08x %08x %08x %08x\n", - r[0], r[1], r[2], r[3], r[4], r[5], r[6], r[7]); - pr_info("r 8 - 15: %08x %08x %08x %08x %08x %08x %08x %08x\n", - r[8], r[9], r[10], r[11], r[12], r[13], r[14], r[15]); - pr_info("r 16 - 18: %08x %08x %08x\n", r[16], r[17], r[18]); - pr_info("Match : %08x %08x %08x %08x %08x %08x\n", r[0], r[1], r[2], r[3], r[4], r[5]); - pr_info("Fixed : %06x\n", r[6] >> 8); - pr_info("Match M: %08x %08x %08x %08x %08x %08x\n", - (r[6] << 24) | (r[7] >> 8), (r[7] << 24) | (r[8] >> 8), (r[8] << 24) | (r[9] >> 8), - (r[9] << 24) | (r[10] >> 8), (r[10] << 24) | (r[11] >> 8), - (r[11] << 24) | (r[12] >> 8)); - pr_info("R[13]: %08x\n", r[13]); - pr_info("Fixed M: %06x\n", ((r[12] << 16) | (r[13] >> 16)) & 0xffffff); - pr_info("Valid / not / and1 / and2 : %1x\n", (r[13] >> 12) & 0xf); - pr_info("r 13-16: %08x %08x %08x %08x\n", r[13], r[14], r[15], r[16]); -} - -static int rtl931x_pie_rule_write(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr) -{ - /* Access IACL table (0) via register 1, the table size is 4096 */ - struct table_reg *q = rtl_table_get(RTL9310_TBL_1, 0); - u32 r[22]; - int block = idx / PIE_BLOCK_SIZE; - u32 t_select = sw_r32(RTL931X_PIE_BLK_TMPLTE_CTRL(block)); - - pr_info("%s: %d, t_select: %08x\n", __func__, idx, t_select); - - for (int i = 0; i < 22; i++) - r[i] = 0; - - if (!pr->valid) { - rtl_table_write(q, idx); - rtl_table_release(q); - return 0; - } - rtl931x_write_pie_fixed_fields(r, pr); - - pr_info("%s: template %d\n", __func__, (t_select >> (pr->tid * 4)) & 0xf); - rtl931x_write_pie_templated(r, pr, fixed_templates[(t_select >> (pr->tid * 4)) & 0xf]); - - rtl931x_write_pie_action(r, pr); - - rtl931x_pie_rule_dump_raw(r); - - for (int i = 0; i < 22; i++) - sw_w32(r[i], rtl_table_data(q, i)); - - rtl_table_write(q, idx); - rtl_table_release(q); - - return 0; -} - -static bool rtl931x_pie_templ_has(int t, enum template_field_id field_type) -{ - for (int i = 0; i < N_FIXED_FIELDS_RTL931X; i++) { - enum template_field_id ft = fixed_templates[t][i]; - if (field_type == ft) - return true; - } - - return false; -} - -/* Verify that the rule pr is compatible with a given template t in block block - * Note that this function is SoC specific since the values of e.g. TEMPLATE_FIELD_SIP0 - * depend on the SoC - */ -static int rtl931x_pie_verify_template(struct rtl838x_switch_priv *priv, - struct pie_rule *pr, int t, int block) -{ - int i; - - if (!pr->is_ipv6 && pr->sip_m && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_SIP0)) - return -1; - - if (!pr->is_ipv6 && pr->dip_m && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_DIP0)) - return -1; - - if (pr->is_ipv6) { - if ((pr->sip6_m.s6_addr32[0] || - pr->sip6_m.s6_addr32[1] || - pr->sip6_m.s6_addr32[2] || - pr->sip6_m.s6_addr32[3]) && - !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_SIP2)) - return -1; - if ((pr->dip6_m.s6_addr32[0] || - pr->dip6_m.s6_addr32[1] || - pr->dip6_m.s6_addr32[2] || - pr->dip6_m.s6_addr32[3]) && - !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_DIP2)) - return -1; - } - - if (ether_addr_to_u64(pr->smac) && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_SMAC0)) - return -1; - - if (ether_addr_to_u64(pr->dmac) && !rtl931x_pie_templ_has(t, TEMPLATE_FIELD_DMAC0)) - return -1; - - /* TODO: Check more */ - - i = find_first_zero_bit(&priv->pie_use_bm[block * 4], PIE_BLOCK_SIZE); - - if (i >= PIE_BLOCK_SIZE) - return -1; - - return i + PIE_BLOCK_SIZE * block; -} - -static int rtl931x_pie_rule_add(struct rtl838x_switch_priv *priv, struct pie_rule *pr) -{ - int idx, block, j; - int min_block = 0; - int max_block = priv->n_pie_blocks / 2; - - if (pr->is_egress) { - min_block = max_block; - max_block = priv->n_pie_blocks; - } - pr_info("In %s\n", __func__); - - mutex_lock(&priv->pie_mutex); - - for (block = min_block; block < max_block; block++) { - for (j = 0; j < 2; j++) { - int t = (sw_r32(RTL931X_PIE_BLK_TMPLTE_CTRL(block)) >> (j * 4)) & 0xf; - pr_info("Testing block %d, template %d, template id %d\n", block, j, t); - pr_info("%s: %08x\n", - __func__, sw_r32(RTL931X_PIE_BLK_TMPLTE_CTRL(block))); - idx = rtl931x_pie_verify_template(priv, pr, t, block); - if (idx >= 0) - break; - } - if (j < 2) - break; - } - - if (block >= priv->n_pie_blocks) { - mutex_unlock(&priv->pie_mutex); - return -EOPNOTSUPP; - } - - pr_info("Using block: %d, index %d, template-id %d\n", block, idx, j); - set_bit(idx, priv->pie_use_bm); - - pr->valid = true; - pr->tid = j; /* Mapped to template number */ - pr->tid_m = 0x1; - pr->id = idx; - - rtl931x_pie_lookup_enable(priv, idx); - rtl931x_pie_rule_write(priv, idx, pr); - - mutex_unlock(&priv->pie_mutex); - - return 0; -} - -/* Delete a range of Packet Inspection Engine rules */ -static int rtl931x_pie_rule_del(struct rtl838x_switch_priv *priv, int index_from, int index_to) -{ - u32 v = (index_from << 1)| (index_to << 13 ) | BIT(0); - - pr_info("%s: from %d to %d\n", __func__, index_from, index_to); - mutex_lock(&priv->reg_mutex); - - /* Write from-to and execute bit into control register */ - sw_w32(v, RTL931X_PIE_CLR_CTRL); - - /* Wait until command has completed */ - do { - } while (sw_r32(RTL931X_PIE_CLR_CTRL) & BIT(0)); - - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static void rtl931x_pie_rule_rm(struct rtl838x_switch_priv *priv, struct pie_rule *pr) -{ - int idx = pr->id; - - rtl931x_pie_rule_del(priv, idx, idx); - clear_bit(idx, priv->pie_use_bm); -} - -static void rtl931x_pie_init(struct rtl838x_switch_priv *priv) -{ - u32 template_selectors; - - mutex_init(&priv->pie_mutex); - - pr_info("%s\n", __func__); - /* Enable ACL lookup on all ports, including CPU_PORT */ - for (int i = 0; i <= priv->cpu_port; i++) - sw_w32(1, RTL931X_ACL_PORT_LOOKUP_CTRL(i)); - - /* Include IPG in metering */ - sw_w32_mask(0, 1, RTL931X_METER_GLB_CTRL); - - /* Delete all present rules, block size is 128 on all SoC families */ - rtl931x_pie_rule_del(priv, 0, priv->n_pie_blocks * 128 - 1); - - /* Assign first half blocks 0-7 to VACL phase, second half to IACL */ - /* 3 bits are used for each block, values for PIE blocks are */ - /* 6: Disabled, 0: VACL, 1: IACL, 2: EACL */ - /* And for OpenFlow Flow blocks: 3: Ingress Flow table 0, */ - /* 4: Ingress Flow Table 3, 5: Egress flow table 0 */ - for (int i = 0; i < priv->n_pie_blocks; i++) { - int pos = (i % 10) * 3; - u32 r = RTL931X_PIE_BLK_PHASE_CTRL + 4 * (i / 10); - - if (i < priv->n_pie_blocks / 2) - sw_w32_mask(0x7 << pos, 0, r); - else - sw_w32_mask(0x7 << pos, 1 << pos, r); - } - - /* Enable predefined templates 0, 1 for first quarter of all blocks */ - template_selectors = 0 | (1 << 4); - for (int i = 0; i < priv->n_pie_blocks / 4; i++) - sw_w32(template_selectors, RTL931X_PIE_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 2, 3 for second quarter of all blocks */ - template_selectors = 2 | (3 << 4); - for (int i = priv->n_pie_blocks / 4; i < priv->n_pie_blocks / 2; i++) - sw_w32(template_selectors, RTL931X_PIE_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 0, 1 for third quater of all blocks */ - template_selectors = 0 | (1 << 4); - for (int i = priv->n_pie_blocks / 2; i < priv->n_pie_blocks * 3 / 4; i++) - sw_w32(template_selectors, RTL931X_PIE_BLK_TMPLTE_CTRL(i)); - - /* Enable predefined templates 2, 3 for fourth quater of all blocks */ - template_selectors = 2 | (3 << 4); - for (int i = priv->n_pie_blocks * 3 / 4; i < priv->n_pie_blocks; i++) - sw_w32(template_selectors, RTL931X_PIE_BLK_TMPLTE_CTRL(i)); - -} - -int rtl931x_l3_setup(struct rtl838x_switch_priv *priv) -{ - return 0; -} - -void rtl931x_vlan_port_keep_tag_set(int port, bool keep_outer, bool keep_inner) -{ - sw_w32(FIELD_PREP(RTL931X_VLAN_PORT_TAG_EGR_OTAG_STS_MASK, - keep_outer ? RTL931X_VLAN_PORT_TAG_STS_TAGGED : RTL931X_VLAN_PORT_TAG_STS_UNTAG) | - FIELD_PREP(RTL931X_VLAN_PORT_TAG_EGR_ITAG_STS_MASK, - keep_inner ? RTL931X_VLAN_PORT_TAG_STS_TAGGED : RTL931X_VLAN_PORT_TAG_STS_UNTAG), - RTL931X_VLAN_PORT_TAG_CTRL(port)); -} - -void rtl931x_vlan_port_pvidmode_set(int port, enum pbvlan_type type, enum pbvlan_mode mode) -{ - if (type == PBVLAN_TYPE_INNER) - sw_w32_mask(0x3 << 12, mode << 12, RTL931X_VLAN_PORT_IGR_CTRL + (port << 2)); - else - sw_w32_mask(0x3 << 26, mode << 26, RTL931X_VLAN_PORT_IGR_CTRL + (port << 2)); -} - -void rtl931x_vlan_port_pvid_set(int port, enum pbvlan_type type, int pvid) -{ - if (type == PBVLAN_TYPE_INNER) - sw_w32_mask(0xfff, pvid, RTL931X_VLAN_PORT_IGR_CTRL + (port << 2)); - else - sw_w32_mask(0xfff << 14, pvid << 14, RTL931X_VLAN_PORT_IGR_CTRL + (port << 2)); -} - -static void rtl931x_set_igr_filter(int port, enum igr_filter state) -{ - sw_w32_mask(0x3 << ((port & 0xf)<<1), state << ((port & 0xf)<<1), - RTL931X_VLAN_PORT_IGR_FLTR + (((port >> 4) << 2))); -} - -static void rtl931x_set_egr_filter(int port, enum egr_filter state) -{ - sw_w32_mask(0x1 << (port % 0x20), state << (port % 0x20), - RTL931X_VLAN_PORT_EGR_FLTR + (((port >> 5) << 2))); -} - -void rtl931x_set_distribution_algorithm(int group, int algoidx, u32 algomsk) -{ - u32 l3shift = 0; - u32 newmask = 0; - - /* TODO: for now we set algoidx to 0 */ - algoidx = 0; - - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SIP_BIT) { - l3shift = 4; - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SIP_BIT; - } - if (algomsk & TRUNK_DISTRIBUTION_ALGO_DIP_BIT) { - l3shift = 4; - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_DIP_BIT; - } - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT) { - l3shift = 4; - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT; - } - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SRC_L4PORT_BIT) { - l3shift = 4; - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SRC_L4PORT_BIT; - } - - if (l3shift == 4) { - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SMAC_BIT) - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_SMAC_BIT; - if (algomsk & TRUNK_DISTRIBUTION_ALGO_DMAC_BIT) - newmask |= TRUNK_DISTRIBUTION_ALGO_L3_DMAC_BIT; - } else { - if (algomsk & TRUNK_DISTRIBUTION_ALGO_SMAC_BIT) - newmask |= TRUNK_DISTRIBUTION_ALGO_L2_SMAC_BIT; - if (algomsk & TRUNK_DISTRIBUTION_ALGO_DMAC_BIT) - newmask |= TRUNK_DISTRIBUTION_ALGO_L2_DMAC_BIT; - } - - sw_w32(newmask << l3shift, RTL931X_TRK_HASH_CTRL + (algoidx << 2)); -} - -static void rtl931x_led_init(struct rtl838x_switch_priv *priv) -{ - u64 pm_copper = 0, pm_fiber = 0; - struct device_node *node; - - pr_info("%s called\n", __func__); - node = of_find_compatible_node(NULL, NULL, "realtek,rtl9300-leds"); - if (!node) { - pr_info("%s No compatible LED node found\n", __func__); - return; - } - - for (int i = 0; i < priv->cpu_port; i++) { - int pos = (i << 1) % 32; - u32 set; - u32 v; - - sw_w32_mask(0x3 << pos, 0, RTL931X_LED_PORT_FIB_SET_SEL_CTRL(i)); - sw_w32_mask(0x3 << pos, 0, RTL931X_LED_PORT_COPR_SET_SEL_CTRL(i)); - - if (!priv->ports[i].phy) - continue; - - v = 0x1; /* Found on the EdgeCore, but we do not have any HW description */ - sw_w32_mask(0x3 << pos, v << pos, RTL931X_LED_PORT_NUM_CTRL(i)); - - if (priv->ports[i].phy_is_integrated) - pm_fiber |= BIT_ULL(i); - else - pm_copper |= BIT_ULL(i); - - set = priv->ports[i].led_set; - sw_w32_mask(0, set << pos, RTL931X_LED_PORT_COPR_SET_SEL_CTRL(i)); - sw_w32_mask(0, set << pos, RTL931X_LED_PORT_FIB_SET_SEL_CTRL(i)); - } - - for (int i = 0; i < 4; i++) { - const __be32 *led_set; - char set_name[9]; - u32 setlen; - u32 v; - - sprintf(set_name, "led_set%d", i); - pr_info(">%s<\n", set_name); - led_set = of_get_property(node, set_name, &setlen); - if (!led_set || setlen != 16) - break; - v = be32_to_cpup(led_set) << 16 | be32_to_cpup(led_set + 1); - sw_w32(v, RTL931X_LED_SET0_0_CTRL - 4 - i * 8); - v = be32_to_cpup(led_set + 2) << 16 | be32_to_cpup(led_set + 3); - sw_w32(v, RTL931X_LED_SET0_0_CTRL - i * 8); - } - - /* Set LED mode to serial (0x1) */ - sw_w32_mask(0x3, 0x1, RTL931X_LED_GLB_CTRL); - - rtl839x_set_port_reg_le(pm_copper, RTL931X_LED_PORT_COPR_MASK_CTRL); - rtl839x_set_port_reg_le(pm_fiber, RTL931X_LED_PORT_FIB_MASK_CTRL); - rtl839x_set_port_reg_le(pm_copper | pm_fiber, RTL931X_LED_PORT_COMBO_MASK_CTRL); - - for (int i = 0; i < 32; i++) - pr_info("%s %08x: %08x\n",__func__, 0xbb000600 + i * 4, sw_r32(0x0600 + i * 4)); -} - -const struct rtl838x_reg rtl931x_reg = { - .mask_port_reg_be = rtl839x_mask_port_reg_be, - .set_port_reg_be = rtl839x_set_port_reg_be, - .get_port_reg_be = rtl839x_get_port_reg_be, - .mask_port_reg_le = rtl839x_mask_port_reg_le, - .set_port_reg_le = rtl839x_set_port_reg_le, - .get_port_reg_le = rtl839x_get_port_reg_le, - .stat_port_rst = RTL931X_STAT_PORT_RST, - .stat_rst = RTL931X_STAT_RST, - .stat_port_std_mib = 0, /* Not defined */ - .traffic_enable = rtl931x_traffic_enable, - .traffic_disable = rtl931x_traffic_disable, - .traffic_get = rtl931x_traffic_get, - .traffic_set = rtl931x_traffic_set, - .l2_ctrl_0 = RTL931X_L2_CTRL, - .l2_ctrl_1 = RTL931X_L2_AGE_CTRL, - .l2_port_aging_out = RTL931X_L2_PORT_AGE_CTRL, - .set_ageing_time = rtl931x_set_ageing_time, - /* .smi_poll_ctrl does not exist */ - .l2_tbl_flush_ctrl = RTL931X_L2_TBL_FLUSH_CTRL, - .exec_tbl0_cmd = rtl931x_exec_tbl0_cmd, - .exec_tbl1_cmd = rtl931x_exec_tbl1_cmd, - .tbl_access_data_0 = rtl931x_tbl_access_data_0, - .isr_glb_src = RTL931X_ISR_GLB_SRC, - .isr_port_link_sts_chg = RTL931X_ISR_PORT_LINK_STS_CHG, - .imr_port_link_sts_chg = RTL931X_IMR_PORT_LINK_STS_CHG, - /* imr_glb does not exist on RTL931X */ - .vlan_tables_read = rtl931x_vlan_tables_read, - .vlan_set_tagged = rtl931x_vlan_set_tagged, - .vlan_set_untagged = rtl931x_vlan_set_untagged, - .vlan_profile_dump = rtl931x_vlan_profile_dump, - .vlan_profile_setup = rtl931x_vlan_profile_setup, - .vlan_fwd_on_inner = rtl931x_vlan_fwd_on_inner, - .stp_get = rtl931x_stp_get, - .stp_set = rtl931x_stp_set, - .mac_force_mode_ctrl = rtl931x_mac_force_mode_ctrl, - .mac_port_ctrl = rtl931x_mac_port_ctrl, - .l2_port_new_salrn = rtl931x_l2_port_new_salrn, - .l2_port_new_sa_fwd = rtl931x_l2_port_new_sa_fwd, - .mir_ctrl = RTL931X_MIR_CTRL, - .mir_dpm = RTL931X_MIR_DPM_CTRL, - .mir_spm = RTL931X_MIR_SPM_CTRL, - .mac_link_sts = RTL931X_MAC_LINK_STS, - .mac_link_dup_sts = RTL931X_MAC_LINK_DUP_STS, - .mac_link_spd_sts = rtl931x_mac_link_spd_sts, - .mac_rx_pause_sts = RTL931X_MAC_RX_PAUSE_STS, - .mac_tx_pause_sts = RTL931X_MAC_TX_PAUSE_STS, - .read_l2_entry_using_hash = rtl931x_read_l2_entry_using_hash, - .write_l2_entry_using_hash = rtl931x_write_l2_entry_using_hash, - .read_cam = rtl931x_read_cam, - .write_cam = rtl931x_write_cam, - .vlan_port_keep_tag_set = rtl931x_vlan_port_keep_tag_set, - .vlan_port_pvidmode_set = rtl931x_vlan_port_pvidmode_set, - .vlan_port_pvid_set = rtl931x_vlan_port_pvid_set, - .trk_mbr_ctr = rtl931x_trk_mbr_ctr, - .set_vlan_igr_filter = rtl931x_set_igr_filter, - .set_vlan_egr_filter = rtl931x_set_egr_filter, - .set_distribution_algorithm = rtl931x_set_distribution_algorithm, - .l2_hash_key = rtl931x_l2_hash_key, - .read_mcast_pmask = rtl931x_read_mcast_pmask, - .write_mcast_pmask = rtl931x_write_mcast_pmask, - .pie_init = rtl931x_pie_init, - .pie_rule_write = rtl931x_pie_rule_write, - .pie_rule_add = rtl931x_pie_rule_add, - .pie_rule_rm = rtl931x_pie_rule_rm, - .l2_learning_setup = rtl931x_l2_learning_setup, - .l3_setup = rtl931x_l3_setup, - .led_init = rtl931x_led_init, -}; diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/tc.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/tc.c deleted file mode 100644 index 3f7c31e04d..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/tc.c +++ /dev/null @@ -1,410 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include -#include -#include -#include -#include - -#include "rtl83xx.h" -#include "rtl838x.h" - -/* Parse the flow rule for the matching conditions */ -static int rtl83xx_parse_flow_rule(struct rtl838x_switch_priv *priv, - struct flow_rule *rule, struct rtl83xx_flow *flow) -{ - struct flow_dissector *dissector = rule->match.dissector; - - pr_debug("In %s\n", __func__); - /* KEY_CONTROL and KEY_BASIC are needed for forming a meaningful key */ - if ((dissector->used_keys & BIT(FLOW_DISSECTOR_KEY_CONTROL)) == 0 || - (dissector->used_keys & BIT(FLOW_DISSECTOR_KEY_BASIC)) == 0) { - pr_err("Cannot form TC key: used_keys = 0x%x\n", dissector->used_keys); - return -EOPNOTSUPP; - } - - if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) { - struct flow_match_basic match; - - pr_debug("%s: BASIC\n", __func__); - flow_rule_match_basic(rule, &match); - if (match.key->n_proto == htons(ETH_P_ARP)) - flow->rule.frame_type = 0; - if (match.key->n_proto == htons(ETH_P_IP)) - flow->rule.frame_type = 2; - if (match.key->n_proto == htons(ETH_P_IPV6)) - flow->rule.frame_type = 3; - if ((match.key->n_proto == htons(ETH_P_ARP)) || flow->rule.frame_type) - flow->rule.frame_type_m = 3; - if (flow->rule.frame_type >= 2) { - if (match.key->ip_proto == IPPROTO_UDP) - flow->rule.frame_type_l4 = 0; - if (match.key->ip_proto == IPPROTO_TCP) - flow->rule.frame_type_l4 = 1; - if (match.key->ip_proto == IPPROTO_ICMP || match.key->ip_proto == IPPROTO_ICMPV6) - flow->rule.frame_type_l4 = 2; - if (match.key->ip_proto == IPPROTO_TCP) - flow->rule.frame_type_l4 = 3; - if ((match.key->ip_proto == IPPROTO_UDP) || flow->rule.frame_type_l4) - flow->rule.frame_type_l4_m = 7; - } - } - - if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) { - struct flow_match_eth_addrs match; - - pr_debug("%s: ETH_ADDR\n", __func__); - flow_rule_match_eth_addrs(rule, &match); - ether_addr_copy(flow->rule.dmac, match.key->dst); - ether_addr_copy(flow->rule.dmac_m, match.mask->dst); - ether_addr_copy(flow->rule.smac, match.key->src); - ether_addr_copy(flow->rule.smac_m, match.mask->src); - } - - if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_VLAN)) { - struct flow_match_vlan match; - - pr_debug("%s: VLAN\n", __func__); - flow_rule_match_vlan(rule, &match); - flow->rule.itag = match.key->vlan_id; - flow->rule.itag_m = match.mask->vlan_id; - /* TODO: What about match.key->vlan_priority? */ - } - - if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV4_ADDRS)) { - struct flow_match_ipv4_addrs match; - - pr_debug("%s: IPV4\n", __func__); - flow_rule_match_ipv4_addrs(rule, &match); - flow->rule.is_ipv6 = false; - flow->rule.dip = match.key->dst; - flow->rule.dip_m = match.mask->dst; - flow->rule.sip = match.key->src; - flow->rule.sip_m = match.mask->src; - } else if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV6_ADDRS)) { - struct flow_match_ipv6_addrs match; - - pr_debug("%s: IPV6\n", __func__); - flow->rule.is_ipv6 = true; - flow_rule_match_ipv6_addrs(rule, &match); - flow->rule.dip6 = match.key->dst; - flow->rule.dip6_m = match.mask->dst; - flow->rule.sip6 = match.key->src; - flow->rule.sip6_m = match.mask->src; - } - - if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_PORTS)) { - struct flow_match_ports match; - - pr_debug("%s: PORTS\n", __func__); - flow_rule_match_ports(rule, &match); - flow->rule.dport = match.key->dst; - flow->rule.dport_m = match.mask->dst; - flow->rule.sport = match.key->src; - flow->rule.sport_m = match.mask->src; - } - - /* TODO: ICMP */ - return 0; -} - -static void rtl83xx_flow_bypass_all(struct rtl83xx_flow *flow) -{ - flow->rule.bypass_sel = true; - flow->rule.bypass_all = true; - flow->rule.bypass_igr_stp = true; - flow->rule.bypass_ibc_sc = true; -} - -static int rtl83xx_parse_fwd(struct rtl838x_switch_priv *priv, - const struct flow_action_entry *act, struct rtl83xx_flow *flow) -{ - struct net_device *dev = act->dev; - int port; - - port = rtl83xx_port_is_under(dev, priv); - if (port < 0) { - netdev_info(dev, "%s: not a DSA device.\n", __func__); - return -EINVAL; - } - - flow->rule.fwd_sel = true; - flow->rule.fwd_data = port; - pr_debug("Using port index: %d\n", port); - rtl83xx_flow_bypass_all(flow); - - return 0; -} - -static int rtl83xx_add_flow(struct rtl838x_switch_priv *priv, struct flow_cls_offload *f, - struct rtl83xx_flow *flow) -{ - struct flow_rule *rule = flow_cls_offload_flow_rule(f); - const struct flow_action_entry *act; - int i, err; - - pr_debug("%s\n", __func__); - - rtl83xx_parse_flow_rule(priv, rule, flow); - - flow_action_for_each(i, act, &rule->action) { - switch (act->id) { - case FLOW_ACTION_DROP: - pr_debug("%s: DROP\n", __func__); - flow->rule.drop = true; - rtl83xx_flow_bypass_all(flow); - return 0; - - case FLOW_ACTION_TRAP: - pr_debug("%s: TRAP\n", __func__); - flow->rule.fwd_data = priv->cpu_port; - flow->rule.fwd_act = PIE_ACT_REDIRECT_TO_PORT; - rtl83xx_flow_bypass_all(flow); - break; - - case FLOW_ACTION_MANGLE: - pr_err("%s: FLOW_ACTION_MANGLE not supported\n", __func__); - return -EOPNOTSUPP; - - case FLOW_ACTION_ADD: - pr_err("%s: FLOW_ACTION_ADD not supported\n", __func__); - return -EOPNOTSUPP; - - case FLOW_ACTION_VLAN_PUSH: - pr_debug("%s: VLAN_PUSH\n", __func__); -/* TODO: act->vlan.proto */ - flow->rule.ivid_act = PIE_ACT_VID_ASSIGN; - flow->rule.ivid_sel = true; - flow->rule.ivid_data = htons(act->vlan.vid); - flow->rule.ovid_act = PIE_ACT_VID_ASSIGN; - flow->rule.ovid_sel = true; - flow->rule.ovid_data = htons(act->vlan.vid); - flow->rule.fwd_mod_to_cpu = true; - break; - - case FLOW_ACTION_VLAN_POP: - pr_debug("%s: VLAN_POP\n", __func__); - flow->rule.ivid_act = PIE_ACT_VID_ASSIGN; - flow->rule.ivid_data = 0; - flow->rule.ivid_sel = true; - flow->rule.ovid_act = PIE_ACT_VID_ASSIGN; - flow->rule.ovid_data = 0; - flow->rule.ovid_sel = true; - flow->rule.fwd_mod_to_cpu = true; - break; - - case FLOW_ACTION_CSUM: - pr_err("%s: FLOW_ACTION_CSUM not supported\n", __func__); - return -EOPNOTSUPP; - - case FLOW_ACTION_REDIRECT: - pr_debug("%s: REDIRECT\n", __func__); - err = rtl83xx_parse_fwd(priv, act, flow); - if (err) - return err; - flow->rule.fwd_act = PIE_ACT_REDIRECT_TO_PORT; - break; - - case FLOW_ACTION_MIRRED: - pr_debug("%s: MIRRED\n", __func__); - err = rtl83xx_parse_fwd(priv, act, flow); - if (err) - return err; - flow->rule.fwd_act = PIE_ACT_COPY_TO_PORT; - break; - - default: - pr_err("%s: Flow action not supported: %d\n", __func__, act->id); - return -EOPNOTSUPP; - } - } - - return 0; -} - -static const struct rhashtable_params tc_ht_params = { - .head_offset = offsetof(struct rtl83xx_flow, node), - .key_offset = offsetof(struct rtl83xx_flow, cookie), - .key_len = sizeof(((struct rtl83xx_flow *)0)->cookie), - .automatic_shrinking = true, -}; - -static int rtl83xx_configure_flower(struct rtl838x_switch_priv *priv, - struct flow_cls_offload *f) -{ - struct rtl83xx_flow *flow; - int err = 0; - - pr_debug("In %s\n", __func__); - - rcu_read_lock(); - pr_debug("Cookie %08lx\n", f->cookie); - flow = rhashtable_lookup(&priv->tc_ht, &f->cookie, tc_ht_params); - if (flow) { - pr_info("%s: Got flow\n", __func__); - err = -EEXIST; - goto rcu_unlock; - } - -rcu_unlock: - rcu_read_unlock(); - if (flow) - goto out; - pr_debug("%s: New flow\n", __func__); - - flow = kzalloc(sizeof(*flow), GFP_KERNEL); - if (!flow) { - err = -ENOMEM; - goto out; - } - - flow->cookie = f->cookie; - flow->priv = priv; - - err = rhashtable_insert_fast(&priv->tc_ht, &flow->node, tc_ht_params); - if (err) { - pr_err("Could not insert add new rule\n"); - goto out_free; - } - - rtl83xx_add_flow(priv, f, flow); /* TODO: check error */ - - /* Add log action to flow */ - flow->rule.packet_cntr = rtl83xx_packet_cntr_alloc(priv); - if (flow->rule.packet_cntr >= 0) { - pr_debug("Using packet counter %d\n", flow->rule.packet_cntr); - flow->rule.log_sel = true; - flow->rule.log_data = flow->rule.packet_cntr; - } - - err = priv->r->pie_rule_add(priv, &flow->rule); - return err; - -out_free: - kfree(flow); -out: - pr_err("%s: error %d\n", __func__, err); - - return err; -} - -static int rtl83xx_delete_flower(struct rtl838x_switch_priv *priv, - struct flow_cls_offload * cls_flower) -{ - struct rtl83xx_flow *flow; - - pr_debug("In %s\n", __func__); - rcu_read_lock(); - flow = rhashtable_lookup_fast(&priv->tc_ht, &cls_flower->cookie, tc_ht_params); - if (!flow) { - rcu_read_unlock(); - return -EINVAL; - } - - priv->r->pie_rule_rm(priv, &flow->rule); - - rhashtable_remove_fast(&priv->tc_ht, &flow->node, tc_ht_params); - - kfree_rcu(flow, rcu_head); - - rcu_read_unlock(); - - return 0; -} - -static int rtl83xx_stats_flower(struct rtl838x_switch_priv *priv, - struct flow_cls_offload * cls_flower) -{ - struct rtl83xx_flow *flow; - unsigned long lastused = 0; - int total_packets, new_packets; - - pr_debug("%s: \n", __func__); - flow = rhashtable_lookup_fast(&priv->tc_ht, &cls_flower->cookie, tc_ht_params); - if (!flow) - return -1; - - if (flow->rule.packet_cntr >= 0) { - total_packets = priv->r->packet_cntr_read(flow->rule.packet_cntr); - pr_debug("Total packets: %d\n", total_packets); - new_packets = total_packets - flow->rule.last_packet_cnt; - flow->rule.last_packet_cnt = total_packets; - } - - /* TODO: We need a second PIE rule to count the bytes */ - flow_stats_update(&cls_flower->stats, 100 * new_packets, new_packets, 0, lastused, - FLOW_ACTION_HW_STATS_IMMEDIATE); - - return 0; -} - -static int rtl83xx_setup_tc_cls_flower(struct rtl838x_switch_priv *priv, - struct flow_cls_offload *cls_flower) -{ - pr_debug("%s: %d\n", __func__, cls_flower->command); - switch (cls_flower->command) { - case FLOW_CLS_REPLACE: - return rtl83xx_configure_flower(priv, cls_flower); - case FLOW_CLS_DESTROY: - return rtl83xx_delete_flower(priv, cls_flower); - case FLOW_CLS_STATS: - return rtl83xx_stats_flower(priv, cls_flower); - default: - return -EOPNOTSUPP; - } -} - - -static int rtl83xx_setup_tc_block_cb(enum tc_setup_type type, void *type_data, - void *cb_priv) -{ - struct rtl838x_switch_priv *priv = cb_priv; - - switch (type) { - case TC_SETUP_CLSFLOWER: - pr_debug("%s: TC_SETUP_CLSFLOWER\n", __func__); - return rtl83xx_setup_tc_cls_flower(priv, type_data); - default: - return -EOPNOTSUPP; - } -} - -static LIST_HEAD(rtl83xx_block_cb_list); - -int rtl83xx_setup_tc(struct net_device *dev, enum tc_setup_type type, void *type_data) -{ - struct rtl838x_switch_priv *priv; - struct flow_block_offload *f = type_data; - static bool first_time = true; - int err; - - pr_debug("%s: %d\n", __func__, type); - - if(!netdev_uses_dsa(dev)) { - pr_err("%s: no DSA\n", __func__); - return 0; - } - priv = dev->dsa_ptr->ds->priv; - - switch (type) { - case TC_SETUP_BLOCK: - if (first_time) { - first_time = false; - err = rhashtable_init(&priv->tc_ht, &tc_ht_params); - if (err) - pr_err("%s: Could not initialize hash table\n", __func__); - } - - f->unlocked_driver_cb = true; - return flow_block_cb_setup_simple(type_data, - &rtl83xx_block_cb_list, - rtl83xx_setup_tc_block_cb, - priv, priv, true); - default: - return -EOPNOTSUPP; - } - - return 0; -} diff --git a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c deleted file mode 100644 index 7ad9b5f029..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.c +++ /dev/null @@ -1,2733 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* linux/drivers/net/ethernet/rtl838x_eth.c - * Copyright (C) 2020 B. Koblitz - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include "rtl838x_eth.h" - -extern struct rtl83xx_soc_info soc_info; - -/* Maximum number of RX rings is 8 on RTL83XX and 32 on the 93XX - * The ring is assigned by switch based on packet/port priortity - * Maximum number of TX rings is 2, Ring 2 being the high priority - * ring on the RTL93xx SoCs. MAX_RXLEN gives the maximum length - * for an RX ring, MAX_ENTRIES the maximum number of entries - * available in total for all queues. - */ -#define MAX_RXRINGS 32 -#define MAX_RXLEN 300 -#define MAX_ENTRIES (300 * 8) -#define TXRINGS 2 -#define TXRINGLEN 160 -#define NOTIFY_EVENTS 10 -#define NOTIFY_BLOCKS 10 -#define TX_EN 0x8 -#define RX_EN 0x4 -#define TX_EN_93XX 0x20 -#define RX_EN_93XX 0x10 -#define RX_TRUNCATE_EN_93XX BIT(6) -#define RX_TRUNCATE_EN_83XX BIT(4) -#define TX_PAD_EN_838X BIT(5) -#define TX_DO 0x2 -#define WRAP 0x2 -#define MAX_PORTS 57 -#define MAX_SMI_BUSSES 4 - -#define RING_BUFFER 1600 - -struct p_hdr { - uint8_t *buf; - uint16_t reserved; - uint16_t size; /* buffer size */ - uint16_t offset; - uint16_t len; /* pkt len */ - /* cpu_tag[0] is a reserved uint16_t on RTL83xx */ - uint16_t cpu_tag[10]; -} __packed __aligned(1); - -struct n_event { - uint32_t type:2; - uint32_t fidVid:12; - uint64_t mac:48; - uint32_t slp:6; - uint32_t valid:1; - uint32_t reserved:27; -} __packed __aligned(1); - -struct ring_b { - uint32_t rx_r[MAX_RXRINGS][MAX_RXLEN]; - uint32_t tx_r[TXRINGS][TXRINGLEN]; - struct p_hdr rx_header[MAX_RXRINGS][MAX_RXLEN]; - struct p_hdr tx_header[TXRINGS][TXRINGLEN]; - uint32_t c_rx[MAX_RXRINGS]; - uint32_t c_tx[TXRINGS]; - uint8_t tx_space[TXRINGS * TXRINGLEN * RING_BUFFER]; - uint8_t *rx_space; -}; - -struct notify_block { - struct n_event events[NOTIFY_EVENTS]; -}; - -struct notify_b { - struct notify_block blocks[NOTIFY_BLOCKS]; - u32 reserved1[8]; - u32 ring[NOTIFY_BLOCKS]; - u32 reserved2[8]; -}; - -static void rtl838x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio) -{ - /* cpu_tag[0] is reserved on the RTL83XX SoCs */ - h->cpu_tag[1] = 0x0400; /* BIT 10: RTL8380_CPU_TAG */ - h->cpu_tag[2] = 0x0200; /* Set only AS_DPM, to enable DPM settings below */ - h->cpu_tag[3] = 0x0000; - h->cpu_tag[4] = BIT(dest_port) >> 16; - h->cpu_tag[5] = BIT(dest_port) & 0xffff; - - /* Set internal priority (PRI) and enable (AS_PRI) */ - if (prio >= 0) - h->cpu_tag[2] |= ((prio & 0x7) | BIT(3)) << 12; -} - -static void rtl839x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio) -{ - /* cpu_tag[0] is reserved on the RTL83XX SoCs */ - h->cpu_tag[1] = 0x0100; /* RTL8390_CPU_TAG marker */ - h->cpu_tag[2] = BIT(4); /* AS_DPM flag */ - h->cpu_tag[3] = h->cpu_tag[4] = h->cpu_tag[5] = 0; - /* h->cpu_tag[1] |= BIT(1) | BIT(0); */ /* Bypass filter 1/2 */ - if (dest_port >= 32) { - dest_port -= 32; - h->cpu_tag[2] |= (BIT(dest_port) >> 16) & 0xf; - h->cpu_tag[3] = BIT(dest_port) & 0xffff; - } else { - h->cpu_tag[4] = BIT(dest_port) >> 16; - h->cpu_tag[5] = BIT(dest_port) & 0xffff; - } - - /* Set internal priority (PRI) and enable (AS_PRI) */ - if (prio >= 0) - h->cpu_tag[2] |= ((prio & 0x7) | BIT(3)) << 8; -} - -static void rtl930x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio) -{ - h->cpu_tag[0] = 0x8000; /* CPU tag marker */ - h->cpu_tag[1] = h->cpu_tag[2] = 0; - h->cpu_tag[3] = 0; - h->cpu_tag[4] = 0; - h->cpu_tag[5] = 0; - h->cpu_tag[6] = BIT(dest_port) >> 16; - h->cpu_tag[7] = BIT(dest_port) & 0xffff; - - /* Enable (AS_QID) and set priority queue (QID) */ - if (prio >= 0) - h->cpu_tag[2] = (BIT(5) | (prio & 0x1f)) << 8; -} - -static void rtl931x_create_tx_header(struct p_hdr *h, unsigned int dest_port, int prio) -{ - h->cpu_tag[0] = 0x8000; /* CPU tag marker */ - h->cpu_tag[1] = h->cpu_tag[2] = 0; - h->cpu_tag[3] = 0; - h->cpu_tag[4] = h->cpu_tag[5] = h->cpu_tag[6] = h->cpu_tag[7] = 0; - if (dest_port >= 32) { - dest_port -= 32; - h->cpu_tag[4] = BIT(dest_port) >> 16; - h->cpu_tag[5] = BIT(dest_port) & 0xffff; - } else { - h->cpu_tag[6] = BIT(dest_port) >> 16; - h->cpu_tag[7] = BIT(dest_port) & 0xffff; - } - - /* Enable (AS_QID) and set priority queue (QID) */ - if (prio >= 0) - h->cpu_tag[2] = (BIT(5) | (prio & 0x1f)) << 8; -} - -// Currently unused -// static void rtl93xx_header_vlan_set(struct p_hdr *h, int vlan) -// { -// h->cpu_tag[2] |= BIT(4); /* Enable VLAN forwarding offload */ -// h->cpu_tag[2] |= (vlan >> 8) & 0xf; -// h->cpu_tag[3] |= (vlan & 0xff) << 8; -// } - -struct rtl838x_rx_q { - int id; - struct rtl838x_eth_priv *priv; - struct napi_struct napi; -}; - -struct rtl838x_eth_priv { - struct net_device *netdev; - struct platform_device *pdev; - void *membase; - spinlock_t lock; - struct mii_bus *mii_bus; - struct rtl838x_rx_q rx_qs[MAX_RXRINGS]; - struct phylink *phylink; - struct phylink_config phylink_config; - u16 id; - u16 family_id; - const struct rtl838x_eth_reg *r; - u8 cpu_port; - u32 lastEvent; - u16 rxrings; - u16 rxringlen; - u8 smi_bus[MAX_PORTS]; - u8 smi_addr[MAX_PORTS]; - u32 sds_id[MAX_PORTS]; - bool smi_bus_isc45[MAX_SMI_BUSSES]; - bool phy_is_internal[MAX_PORTS]; - phy_interface_t interfaces[MAX_PORTS]; -}; - -extern int rtl838x_phy_init(struct rtl838x_eth_priv *priv); -extern int rtl838x_read_sds_phy(int phy_addr, int phy_reg); -extern int rtl839x_read_sds_phy(int phy_addr, int phy_reg); -extern int rtl839x_write_sds_phy(int phy_addr, int phy_reg, u16 v); -extern int rtl930x_read_sds_phy(int phy_addr, int page, int phy_reg); -extern int rtl930x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v); -extern int rtl931x_read_sds_phy(int phy_addr, int page, int phy_reg); -extern int rtl931x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v); -extern int rtl930x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val); -extern int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val); -extern int rtl931x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val); -extern int rtl931x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val); - -/* On the RTL93XX, the RTL93XX_DMA_IF_RX_RING_CNTR track the fill level of - * the rings. Writing x into these registers substracts x from its content. - * When the content reaches the ring size, the ASIC no longer adds - * packets to this receive queue. - */ -void rtl838x_update_cntr(int r, int released) -{ - /* This feature is not available on RTL838x SoCs */ -} - -void rtl839x_update_cntr(int r, int released) -{ - /* This feature is not available on RTL839x SoCs */ -} - -void rtl930x_update_cntr(int r, int released) -{ - int pos = (r % 3) * 10; - u32 reg = RTL930X_DMA_IF_RX_RING_CNTR + ((r / 3) << 2); - u32 v = sw_r32(reg); - - v = (v >> pos) & 0x3ff; - pr_debug("RX: Work done %d, old value: %d, pos %d, reg %04x\n", released, v, pos, reg); - sw_w32_mask(0x3ff << pos, released << pos, reg); - sw_w32(v, reg); -} - -void rtl931x_update_cntr(int r, int released) -{ - int pos = (r % 3) * 10; - u32 reg = RTL931X_DMA_IF_RX_RING_CNTR + ((r / 3) << 2); - u32 v = sw_r32(reg); - - v = (v >> pos) & 0x3ff; - sw_w32_mask(0x3ff << pos, released << pos, reg); - sw_w32(v, reg); -} - -struct dsa_tag { - u8 reason; - u8 queue; - u16 port; - u8 l2_offloaded; - u8 prio; - bool crc_error; -}; - -bool rtl838x_decode_tag(struct p_hdr *h, struct dsa_tag *t) -{ - /* cpu_tag[0] is reserved. Fields are off-by-one */ - t->reason = h->cpu_tag[4] & 0xf; - t->queue = (h->cpu_tag[1] & 0xe0) >> 5; - t->port = h->cpu_tag[1] & 0x1f; - t->crc_error = t->reason == 13; - - pr_debug("Reason: %d\n", t->reason); - if (t->reason != 6) /* NIC_RX_REASON_SPECIAL_TRAP */ - t->l2_offloaded = 1; - else - t->l2_offloaded = 0; - - return t->l2_offloaded; -} - -bool rtl839x_decode_tag(struct p_hdr *h, struct dsa_tag *t) -{ - /* cpu_tag[0] is reserved. Fields are off-by-one */ - t->reason = h->cpu_tag[5] & 0x1f; - t->queue = (h->cpu_tag[4] & 0xe000) >> 13; - t->port = h->cpu_tag[1] & 0x3f; - t->crc_error = h->cpu_tag[4] & BIT(6); - - pr_debug("Reason: %d\n", t->reason); - if ((t->reason >= 7 && t->reason <= 13) || /* NIC_RX_REASON_RMA */ - (t->reason >= 23 && t->reason <= 25)) /* NIC_RX_REASON_SPECIAL_TRAP */ - t->l2_offloaded = 0; - else - t->l2_offloaded = 1; - - return t->l2_offloaded; -} - -bool rtl930x_decode_tag(struct p_hdr *h, struct dsa_tag *t) -{ - t->reason = h->cpu_tag[7] & 0x3f; - t->queue = (h->cpu_tag[2] >> 11) & 0x1f; - t->port = (h->cpu_tag[0] >> 8) & 0x1f; - t->crc_error = h->cpu_tag[1] & BIT(6); - - pr_debug("Reason %d, port %d, queue %d\n", t->reason, t->port, t->queue); - if (t->reason >= 19 && t->reason <= 27) - t->l2_offloaded = 0; - else - t->l2_offloaded = 1; - - return t->l2_offloaded; -} - -bool rtl931x_decode_tag(struct p_hdr *h, struct dsa_tag *t) -{ - t->reason = h->cpu_tag[7] & 0x3f; - t->queue = (h->cpu_tag[2] >> 11) & 0x1f; - t->port = (h->cpu_tag[0] >> 8) & 0x3f; - t->crc_error = h->cpu_tag[1] & BIT(6); - - if (t->reason != 63) - pr_info("%s: Reason %d, port %d, queue %d\n", __func__, t->reason, t->port, t->queue); - if (t->reason >= 19 && t->reason <= 27) /* NIC_RX_REASON_RMA */ - t->l2_offloaded = 0; - else - t->l2_offloaded = 1; - - return t->l2_offloaded; -} - -/* Discard the RX ring-buffers, called as part of the net-ISR - * when the buffer runs over - */ -static void rtl838x_rb_cleanup(struct rtl838x_eth_priv *priv, int status) -{ - for (int r = 0; r < priv->rxrings; r++) { - struct ring_b *ring = priv->membase; - struct p_hdr *h; - u32 *last; - - pr_debug("In %s working on r: %d\n", __func__, r); - last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4)); - do { - if ((ring->rx_r[r][ring->c_rx[r]] & 0x1)) - break; - pr_debug("Got something: %d\n", ring->c_rx[r]); - h = &ring->rx_header[r][ring->c_rx[r]]; - memset(h, 0, sizeof(struct p_hdr)); - h->buf = (u8 *)KSEG1ADDR(ring->rx_space + - r * priv->rxringlen * RING_BUFFER + - ring->c_rx[r] * RING_BUFFER); - h->size = RING_BUFFER; - /* make sure the header is visible to the ASIC */ - mb(); - - ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1 | (ring->c_rx[r] == (priv->rxringlen - 1) ? - WRAP : - 0x1); - ring->c_rx[r] = (ring->c_rx[r] + 1) % priv->rxringlen; - } while (&ring->rx_r[r][ring->c_rx[r]] != last); - } -} - -struct fdb_update_work { - struct work_struct work; - struct net_device *ndev; - u64 macs[NOTIFY_EVENTS + 1]; -}; - -void rtl838x_fdb_sync(struct work_struct *work) -{ - const struct fdb_update_work *uw = container_of(work, struct fdb_update_work, work); - - for (int i = 0; uw->macs[i]; i++) { - struct switchdev_notifier_fdb_info info; - u8 addr[ETH_ALEN]; - int action; - - action = (uw->macs[i] & (1ULL << 63)) ? - SWITCHDEV_FDB_ADD_TO_BRIDGE : - SWITCHDEV_FDB_DEL_TO_BRIDGE; - u64_to_ether_addr(uw->macs[i] & 0xffffffffffffULL, addr); - info.addr = &addr[0]; - info.vid = 0; - info.offloaded = 1; - pr_debug("FDB entry %d: %llx, action %d\n", i, uw->macs[0], action); - call_switchdev_notifiers(action, uw->ndev, &info.info, NULL); - } - kfree(work); -} - -static void rtl839x_l2_notification_handler(struct rtl838x_eth_priv *priv) -{ - struct notify_b *nb = priv->membase + sizeof(struct ring_b); - u32 e = priv->lastEvent; - - while (!(nb->ring[e] & 1)) { - struct fdb_update_work *w; - struct n_event *event; - u64 mac; - int i; - - w = kzalloc(sizeof(*w), GFP_ATOMIC); - if (!w) { - pr_err("Out of memory: %s", __func__); - return; - } - INIT_WORK(&w->work, rtl838x_fdb_sync); - - for (i = 0; i < NOTIFY_EVENTS; i++) { - event = &nb->blocks[e].events[i]; - if (!event->valid) - continue; - mac = event->mac; - if (event->type) - mac |= 1ULL << 63; - w->ndev = priv->netdev; - w->macs[i] = mac; - } - - /* Hand the ring entry back to the switch */ - nb->ring[e] = nb->ring[e] | 1; - e = (e + 1) % NOTIFY_BLOCKS; - - w->macs[i] = 0ULL; - schedule_work(&w->work); - } - priv->lastEvent = e; -} - -static irqreturn_t rtl83xx_net_irq(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct rtl838x_eth_priv *priv = netdev_priv(dev); - u32 status = sw_r32(priv->r->dma_if_intr_sts); - - pr_debug("IRQ: %08x\n", status); - - /* Ignore TX interrupt */ - if ((status & 0xf0000)) { - /* Clear ISR */ - sw_w32(0x000f0000, priv->r->dma_if_intr_sts); - } - - /* RX interrupt */ - if (status & 0x0ff00) { - /* ACK and disable RX interrupt for this ring */ - sw_w32_mask(0xff00 & status, 0, priv->r->dma_if_intr_msk); - sw_w32(0x0000ff00 & status, priv->r->dma_if_intr_sts); - for (int i = 0; i < priv->rxrings; i++) { - if (status & BIT(i + 8)) { - pr_debug("Scheduling queue: %d\n", i); - napi_schedule(&priv->rx_qs[i].napi); - } - } - } - - /* RX buffer overrun */ - if (status & 0x000ff) { - pr_debug("RX buffer overrun: status %x, mask: %x\n", - status, sw_r32(priv->r->dma_if_intr_msk)); - sw_w32(status, priv->r->dma_if_intr_sts); - rtl838x_rb_cleanup(priv, status & 0xff); - } - - if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00100000) { - sw_w32(0x00100000, priv->r->dma_if_intr_sts); - rtl839x_l2_notification_handler(priv); - } - - if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00200000) { - sw_w32(0x00200000, priv->r->dma_if_intr_sts); - rtl839x_l2_notification_handler(priv); - } - - if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00400000) { - sw_w32(0x00400000, priv->r->dma_if_intr_sts); - rtl839x_l2_notification_handler(priv); - } - - return IRQ_HANDLED; -} - -static irqreturn_t rtl93xx_net_irq(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct rtl838x_eth_priv *priv = netdev_priv(dev); - u32 status_rx_r = sw_r32(priv->r->dma_if_intr_rx_runout_sts); - u32 status_rx = sw_r32(priv->r->dma_if_intr_rx_done_sts); - u32 status_tx = sw_r32(priv->r->dma_if_intr_tx_done_sts); - - pr_debug("In %s, status_tx: %08x, status_rx: %08x, status_rx_r: %08x\n", - __func__, status_tx, status_rx, status_rx_r); - - /* Ignore TX interrupt */ - if (status_tx) { - /* Clear ISR */ - pr_debug("TX done\n"); - sw_w32(status_tx, priv->r->dma_if_intr_tx_done_sts); - } - - /* RX interrupt */ - if (status_rx) { - pr_debug("RX IRQ\n"); - /* ACK and disable RX interrupt for given rings */ - sw_w32(status_rx, priv->r->dma_if_intr_rx_done_sts); - sw_w32_mask(status_rx, 0, priv->r->dma_if_intr_rx_done_msk); - for (int i = 0; i < priv->rxrings; i++) { - if (status_rx & BIT(i)) { - pr_debug("Scheduling queue: %d\n", i); - napi_schedule(&priv->rx_qs[i].napi); - } - } - } - - /* RX buffer overrun */ - if (status_rx_r) { - pr_debug("RX buffer overrun: status %x, mask: %x\n", - status_rx_r, sw_r32(priv->r->dma_if_intr_rx_runout_msk)); - sw_w32(status_rx_r, priv->r->dma_if_intr_rx_runout_sts); - rtl838x_rb_cleanup(priv, status_rx_r); - } - - return IRQ_HANDLED; -} - -static const struct rtl838x_eth_reg rtl838x_reg = { - .net_irq = rtl83xx_net_irq, - .mac_port_ctrl = rtl838x_mac_port_ctrl, - .dma_if_intr_sts = RTL838X_DMA_IF_INTR_STS, - .dma_if_intr_msk = RTL838X_DMA_IF_INTR_MSK, - .dma_if_ctrl = RTL838X_DMA_IF_CTRL, - .mac_force_mode_ctrl = RTL838X_MAC_FORCE_MODE_CTRL, - .dma_rx_base = RTL838X_DMA_RX_BASE, - .dma_tx_base = RTL838X_DMA_TX_BASE, - .dma_if_rx_ring_size = rtl838x_dma_if_rx_ring_size, - .dma_if_rx_ring_cntr = rtl838x_dma_if_rx_ring_cntr, - .dma_if_rx_cur = RTL838X_DMA_IF_RX_CUR, - .rst_glb_ctrl = RTL838X_RST_GLB_CTRL_0, - .get_mac_link_sts = rtl838x_get_mac_link_sts, - .get_mac_link_dup_sts = rtl838x_get_mac_link_dup_sts, - .get_mac_link_spd_sts = rtl838x_get_mac_link_spd_sts, - .get_mac_rx_pause_sts = rtl838x_get_mac_rx_pause_sts, - .get_mac_tx_pause_sts = rtl838x_get_mac_tx_pause_sts, - .mac = RTL838X_MAC, - .l2_tbl_flush_ctrl = RTL838X_L2_TBL_FLUSH_CTRL, - .update_cntr = rtl838x_update_cntr, - .create_tx_header = rtl838x_create_tx_header, - .decode_tag = rtl838x_decode_tag, -}; - -static const struct rtl838x_eth_reg rtl839x_reg = { - .net_irq = rtl83xx_net_irq, - .mac_port_ctrl = rtl839x_mac_port_ctrl, - .dma_if_intr_sts = RTL839X_DMA_IF_INTR_STS, - .dma_if_intr_msk = RTL839X_DMA_IF_INTR_MSK, - .dma_if_ctrl = RTL839X_DMA_IF_CTRL, - .mac_force_mode_ctrl = RTL839X_MAC_FORCE_MODE_CTRL, - .dma_rx_base = RTL839X_DMA_RX_BASE, - .dma_tx_base = RTL839X_DMA_TX_BASE, - .dma_if_rx_ring_size = rtl839x_dma_if_rx_ring_size, - .dma_if_rx_ring_cntr = rtl839x_dma_if_rx_ring_cntr, - .dma_if_rx_cur = RTL839X_DMA_IF_RX_CUR, - .rst_glb_ctrl = RTL839X_RST_GLB_CTRL, - .get_mac_link_sts = rtl839x_get_mac_link_sts, - .get_mac_link_dup_sts = rtl839x_get_mac_link_dup_sts, - .get_mac_link_spd_sts = rtl839x_get_mac_link_spd_sts, - .get_mac_rx_pause_sts = rtl839x_get_mac_rx_pause_sts, - .get_mac_tx_pause_sts = rtl839x_get_mac_tx_pause_sts, - .mac = RTL839X_MAC, - .l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL, - .update_cntr = rtl839x_update_cntr, - .create_tx_header = rtl839x_create_tx_header, - .decode_tag = rtl839x_decode_tag, -}; - -static const struct rtl838x_eth_reg rtl930x_reg = { - .net_irq = rtl93xx_net_irq, - .mac_port_ctrl = rtl930x_mac_port_ctrl, - .dma_if_intr_rx_runout_sts = RTL930X_DMA_IF_INTR_RX_RUNOUT_STS, - .dma_if_intr_rx_done_sts = RTL930X_DMA_IF_INTR_RX_DONE_STS, - .dma_if_intr_tx_done_sts = RTL930X_DMA_IF_INTR_TX_DONE_STS, - .dma_if_intr_rx_runout_msk = RTL930X_DMA_IF_INTR_RX_RUNOUT_MSK, - .dma_if_intr_rx_done_msk = RTL930X_DMA_IF_INTR_RX_DONE_MSK, - .dma_if_intr_tx_done_msk = RTL930X_DMA_IF_INTR_TX_DONE_MSK, - .l2_ntfy_if_intr_sts = RTL930X_L2_NTFY_IF_INTR_STS, - .l2_ntfy_if_intr_msk = RTL930X_L2_NTFY_IF_INTR_MSK, - .dma_if_ctrl = RTL930X_DMA_IF_CTRL, - .mac_force_mode_ctrl = RTL930X_MAC_FORCE_MODE_CTRL, - .dma_rx_base = RTL930X_DMA_RX_BASE, - .dma_tx_base = RTL930X_DMA_TX_BASE, - .dma_if_rx_ring_size = rtl930x_dma_if_rx_ring_size, - .dma_if_rx_ring_cntr = rtl930x_dma_if_rx_ring_cntr, - .dma_if_rx_cur = RTL930X_DMA_IF_RX_CUR, - .rst_glb_ctrl = RTL930X_RST_GLB_CTRL_0, - .get_mac_link_sts = rtl930x_get_mac_link_sts, - .get_mac_link_dup_sts = rtl930x_get_mac_link_dup_sts, - .get_mac_link_spd_sts = rtl930x_get_mac_link_spd_sts, - .get_mac_rx_pause_sts = rtl930x_get_mac_rx_pause_sts, - .get_mac_tx_pause_sts = rtl930x_get_mac_tx_pause_sts, - .mac = RTL930X_MAC_L2_ADDR_CTRL, - .l2_tbl_flush_ctrl = RTL930X_L2_TBL_FLUSH_CTRL, - .update_cntr = rtl930x_update_cntr, - .create_tx_header = rtl930x_create_tx_header, - .decode_tag = rtl930x_decode_tag, -}; - -static const struct rtl838x_eth_reg rtl931x_reg = { - .net_irq = rtl93xx_net_irq, - .mac_port_ctrl = rtl931x_mac_port_ctrl, - .dma_if_intr_rx_runout_sts = RTL931X_DMA_IF_INTR_RX_RUNOUT_STS, - .dma_if_intr_rx_done_sts = RTL931X_DMA_IF_INTR_RX_DONE_STS, - .dma_if_intr_tx_done_sts = RTL931X_DMA_IF_INTR_TX_DONE_STS, - .dma_if_intr_rx_runout_msk = RTL931X_DMA_IF_INTR_RX_RUNOUT_MSK, - .dma_if_intr_rx_done_msk = RTL931X_DMA_IF_INTR_RX_DONE_MSK, - .dma_if_intr_tx_done_msk = RTL931X_DMA_IF_INTR_TX_DONE_MSK, - .l2_ntfy_if_intr_sts = RTL931X_L2_NTFY_IF_INTR_STS, - .l2_ntfy_if_intr_msk = RTL931X_L2_NTFY_IF_INTR_MSK, - .dma_if_ctrl = RTL931X_DMA_IF_CTRL, - .mac_force_mode_ctrl = RTL931X_MAC_FORCE_MODE_CTRL, - .dma_rx_base = RTL931X_DMA_RX_BASE, - .dma_tx_base = RTL931X_DMA_TX_BASE, - .dma_if_rx_ring_size = rtl931x_dma_if_rx_ring_size, - .dma_if_rx_ring_cntr = rtl931x_dma_if_rx_ring_cntr, - .dma_if_rx_cur = RTL931X_DMA_IF_RX_CUR, - .rst_glb_ctrl = RTL931X_RST_GLB_CTRL, - .get_mac_link_sts = rtl931x_get_mac_link_sts, - .get_mac_link_dup_sts = rtl931x_get_mac_link_dup_sts, - .get_mac_link_spd_sts = rtl931x_get_mac_link_spd_sts, - .get_mac_rx_pause_sts = rtl931x_get_mac_rx_pause_sts, - .get_mac_tx_pause_sts = rtl931x_get_mac_tx_pause_sts, - .mac = RTL931X_MAC_L2_ADDR_CTRL, - .l2_tbl_flush_ctrl = RTL931X_L2_TBL_FLUSH_CTRL, - .update_cntr = rtl931x_update_cntr, - .create_tx_header = rtl931x_create_tx_header, - .decode_tag = rtl931x_decode_tag, -}; - -static void rtl838x_hw_reset(struct rtl838x_eth_priv *priv) -{ - u32 int_saved, nbuf; - u32 reset_mask; - - pr_info("RESETTING %x, CPU_PORT %d\n", priv->family_id, priv->cpu_port); - sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(priv->cpu_port)); - mdelay(100); - - /* Disable and clear interrupts */ - if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) { - sw_w32(0x00000000, priv->r->dma_if_intr_rx_runout_msk); - sw_w32(0xffffffff, priv->r->dma_if_intr_rx_runout_sts); - sw_w32(0x00000000, priv->r->dma_if_intr_rx_done_msk); - sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_sts); - sw_w32(0x00000000, priv->r->dma_if_intr_tx_done_msk); - sw_w32(0x0000000f, priv->r->dma_if_intr_tx_done_sts); - } else { - sw_w32(0x00000000, priv->r->dma_if_intr_msk); - sw_w32(0xffffffff, priv->r->dma_if_intr_sts); - } - - if (priv->family_id == RTL8390_FAMILY_ID) { - /* Preserve L2 notification and NBUF settings */ - int_saved = sw_r32(priv->r->dma_if_intr_msk); - nbuf = sw_r32(RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL); - - /* Disable link change interrupt on RTL839x */ - sw_w32(0, RTL839X_IMR_PORT_LINK_STS_CHG); - sw_w32(0, RTL839X_IMR_PORT_LINK_STS_CHG + 4); - - sw_w32(0x00000000, priv->r->dma_if_intr_msk); - sw_w32(0xffffffff, priv->r->dma_if_intr_sts); - } - - /* Reset NIC (SW_NIC_RST) and queues (SW_Q_RST) */ - if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) - reset_mask = 0x6; - else - reset_mask = 0xc; - - sw_w32_mask(0, reset_mask, priv->r->rst_glb_ctrl); - - do { /* Wait for reset of NIC and Queues done */ - udelay(20); - } while (sw_r32(priv->r->rst_glb_ctrl) & reset_mask); - mdelay(100); - - /* Setup Head of Line */ - if (priv->family_id == RTL8380_FAMILY_ID) - sw_w32(0, RTL838X_DMA_IF_RX_RING_SIZE); /* Disabled on RTL8380 */ - if (priv->family_id == RTL8390_FAMILY_ID) - sw_w32(0xffffffff, RTL839X_DMA_IF_RX_RING_CNTR); - if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) { - for (int i = 0; i < priv->rxrings; i++) { - int pos = (i % 3) * 10; - - sw_w32_mask(0x3ff << pos, 0, priv->r->dma_if_rx_ring_size(i)); - sw_w32_mask(0x3ff << pos, priv->rxringlen, - priv->r->dma_if_rx_ring_cntr(i)); - } - } - - /* Re-enable link change interrupt */ - if (priv->family_id == RTL8390_FAMILY_ID) { - sw_w32(0xffffffff, RTL839X_ISR_PORT_LINK_STS_CHG); - sw_w32(0xffffffff, RTL839X_ISR_PORT_LINK_STS_CHG + 4); - sw_w32(0xffffffff, RTL839X_IMR_PORT_LINK_STS_CHG); - sw_w32(0xffffffff, RTL839X_IMR_PORT_LINK_STS_CHG + 4); - - /* Restore notification settings: on RTL838x these bits are null */ - sw_w32_mask(7 << 20, int_saved & (7 << 20), priv->r->dma_if_intr_msk); - sw_w32(nbuf, RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL); - } -} - -static void rtl838x_hw_ring_setup(struct rtl838x_eth_priv *priv) -{ - struct ring_b *ring = priv->membase; - - for (int i = 0; i < priv->rxrings; i++) - sw_w32(KSEG1ADDR(&ring->rx_r[i]), priv->r->dma_rx_base + i * 4); - - for (int i = 0; i < TXRINGS; i++) - sw_w32(KSEG1ADDR(&ring->tx_r[i]), priv->r->dma_tx_base + i * 4); -} - -static void rtl838x_hw_en_rxtx(struct rtl838x_eth_priv *priv) -{ - /* Disable Head of Line features for all RX rings */ - sw_w32(0xffffffff, priv->r->dma_if_rx_ring_size(0)); - - /* Truncate RX buffer to DEFAULT_MTU bytes, pad TX */ - sw_w32((DEFAULT_MTU << 16) | RX_TRUNCATE_EN_83XX | TX_PAD_EN_838X, priv->r->dma_if_ctrl); - - /* Enable RX done, RX overflow and TX done interrupts */ - sw_w32(0xfffff, priv->r->dma_if_intr_msk); - - /* Enable DMA, engine expects empty FCS field */ - sw_w32_mask(0, RX_EN | TX_EN, priv->r->dma_if_ctrl); - - /* Restart TX/RX to CPU port */ - sw_w32_mask(0x0, 0x3, priv->r->mac_port_ctrl(priv->cpu_port)); - /* Set Speed, duplex, flow control - * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL - * | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN - * | MEDIA_SEL - */ - sw_w32(0x6192F, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); - - /* Enable CRC checks on CPU-port */ - sw_w32_mask(0, BIT(3), priv->r->mac_port_ctrl(priv->cpu_port)); -} - -static void rtl839x_hw_en_rxtx(struct rtl838x_eth_priv *priv) -{ - /* Setup CPU-Port: RX Buffer */ - sw_w32((DEFAULT_MTU << 5) | RX_TRUNCATE_EN_83XX, priv->r->dma_if_ctrl); - - /* Enable Notify, RX done, RX overflow and TX done interrupts */ - sw_w32(0x007fffff, priv->r->dma_if_intr_msk); /* Notify IRQ! */ - - /* Enable DMA */ - sw_w32_mask(0, RX_EN | TX_EN, priv->r->dma_if_ctrl); - - /* Restart TX/RX to CPU port, enable CRC checking */ - sw_w32_mask(0x0, 0x3 | BIT(3), priv->r->mac_port_ctrl(priv->cpu_port)); - - /* CPU port joins Lookup Miss Flooding Portmask */ - /* TODO: The code below should also work for the RTL838x */ - sw_w32(0x28000, RTL839X_TBL_ACCESS_L2_CTRL); - sw_w32_mask(0, 0x80000000, RTL839X_TBL_ACCESS_L2_DATA(0)); - sw_w32(0x38000, RTL839X_TBL_ACCESS_L2_CTRL); - - /* Force CPU port link up */ - sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); -} - -static void rtl93xx_hw_en_rxtx(struct rtl838x_eth_priv *priv) -{ - /* Setup CPU-Port: RX Buffer truncated at DEFAULT_MTU Bytes */ - sw_w32((DEFAULT_MTU << 16) | RX_TRUNCATE_EN_93XX, priv->r->dma_if_ctrl); - - for (int i = 0; i < priv->rxrings; i++) { - int pos = (i % 3) * 10; - u32 v; - - sw_w32_mask(0x3ff << pos, priv->rxringlen << pos, priv->r->dma_if_rx_ring_size(i)); - - /* Some SoCs have issues with missing underflow protection */ - v = (sw_r32(priv->r->dma_if_rx_ring_cntr(i)) >> pos) & 0x3ff; - sw_w32_mask(0x3ff << pos, v, priv->r->dma_if_rx_ring_cntr(i)); - } - - /* Enable Notify, RX done, RX overflow and TX done interrupts */ - sw_w32(0xffffffff, priv->r->dma_if_intr_rx_runout_msk); - sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_msk); - sw_w32(0x0000000f, priv->r->dma_if_intr_tx_done_msk); - - /* Enable DMA */ - sw_w32_mask(0, RX_EN_93XX | TX_EN_93XX, priv->r->dma_if_ctrl); - - /* Restart TX/RX to CPU port, enable CRC checking */ - sw_w32_mask(0x0, 0x3 | BIT(4), priv->r->mac_port_ctrl(priv->cpu_port)); - - if (priv->family_id == RTL9300_FAMILY_ID) - sw_w32_mask(0, BIT(priv->cpu_port), RTL930X_L2_UNKN_UC_FLD_PMSK); - else - sw_w32_mask(0, BIT(priv->cpu_port), RTL931X_L2_UNKN_UC_FLD_PMSK); - - if (priv->family_id == RTL9300_FAMILY_ID) - sw_w32(0x217, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); - else - sw_w32(0x2a1d, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); -} - -static void rtl838x_setup_ring_buffer(struct rtl838x_eth_priv *priv, struct ring_b *ring) -{ - for (int i = 0; i < priv->rxrings; i++) { - struct p_hdr *h; - int j; - - for (j = 0; j < priv->rxringlen; j++) { - h = &ring->rx_header[i][j]; - memset(h, 0, sizeof(struct p_hdr)); - h->buf = (u8 *)KSEG1ADDR(ring->rx_space + - i * priv->rxringlen * RING_BUFFER + - j * RING_BUFFER); - h->size = RING_BUFFER; - /* All rings owned by switch, last one wraps */ - ring->rx_r[i][j] = KSEG1ADDR(h) | 1 | (j == (priv->rxringlen - 1) ? - WRAP : - 0); - } - ring->c_rx[i] = 0; - } - - for (int i = 0; i < TXRINGS; i++) { - struct p_hdr *h; - int j; - - for (j = 0; j < TXRINGLEN; j++) { - h = &ring->tx_header[i][j]; - memset(h, 0, sizeof(struct p_hdr)); - h->buf = (u8 *)KSEG1ADDR(ring->tx_space + - i * TXRINGLEN * RING_BUFFER + - j * RING_BUFFER); - h->size = RING_BUFFER; - ring->tx_r[i][j] = KSEG1ADDR(&ring->tx_header[i][j]); - } - /* Last header is wrapping around */ - ring->tx_r[i][j - 1] |= WRAP; - ring->c_tx[i] = 0; - } -} - -static void rtl839x_setup_notify_ring_buffer(struct rtl838x_eth_priv *priv) -{ - struct notify_b *b = priv->membase + sizeof(struct ring_b); - - for (int i = 0; i < NOTIFY_BLOCKS; i++) - b->ring[i] = KSEG1ADDR(&b->blocks[i]) | 1 | (i == (NOTIFY_BLOCKS - 1) ? WRAP : 0); - - sw_w32((u32) b->ring, RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL); - sw_w32_mask(0x3ff << 2, 100 << 2, RTL839X_L2_NOTIFICATION_CTRL); - - /* Setup notification events */ - sw_w32_mask(0, 1 << 14, RTL839X_L2_CTRL_0); /* RTL8390_L2_CTRL_0_FLUSH_NOTIFY_EN */ - sw_w32_mask(0, 1 << 12, RTL839X_L2_NOTIFICATION_CTRL); /* SUSPEND_NOTIFICATION_EN */ - - /* Enable Notification */ - sw_w32_mask(0, 1 << 0, RTL839X_L2_NOTIFICATION_CTRL); - priv->lastEvent = 0; -} - -static int rtl838x_eth_open(struct net_device *ndev) -{ - unsigned long flags; - struct rtl838x_eth_priv *priv = netdev_priv(ndev); - struct ring_b *ring = priv->membase; - - pr_debug("%s called: RX rings %d(length %d), TX rings %d(length %d)\n", - __func__, priv->rxrings, priv->rxringlen, TXRINGS, TXRINGLEN); - - spin_lock_irqsave(&priv->lock, flags); - rtl838x_hw_reset(priv); - rtl838x_setup_ring_buffer(priv, ring); - if (priv->family_id == RTL8390_FAMILY_ID) { - rtl839x_setup_notify_ring_buffer(priv); - /* Make sure the ring structure is visible to the ASIC */ - mb(); - flush_cache_all(); - } - - rtl838x_hw_ring_setup(priv); - phylink_start(priv->phylink); - - for (int i = 0; i < priv->rxrings; i++) - napi_enable(&priv->rx_qs[i].napi); - - switch (priv->family_id) { - case RTL8380_FAMILY_ID: - rtl838x_hw_en_rxtx(priv); - /* Trap IGMP/MLD traffic to CPU-Port */ - sw_w32(0x3, RTL838X_SPCL_TRAP_IGMP_CTRL); - /* Flush learned FDB entries on link down of a port */ - sw_w32_mask(0, BIT(7), RTL838X_L2_CTRL_0); - break; - - case RTL8390_FAMILY_ID: - rtl839x_hw_en_rxtx(priv); - /* Trap MLD and IGMP messages to CPU_PORT */ - sw_w32(0x3, RTL839X_SPCL_TRAP_IGMP_CTRL); - /* Flush learned FDB entries on link down of a port */ - sw_w32_mask(0, BIT(7), RTL839X_L2_CTRL_0); - break; - - case RTL9300_FAMILY_ID: - rtl93xx_hw_en_rxtx(priv); - /* Flush learned FDB entries on link down of a port */ - sw_w32_mask(0, BIT(7), RTL930X_L2_CTRL); - /* Trap MLD and IGMP messages to CPU_PORT */ - sw_w32((0x2 << 3) | 0x2, RTL930X_VLAN_APP_PKT_CTRL); - break; - - case RTL9310_FAMILY_ID: - rtl93xx_hw_en_rxtx(priv); - - /* Trap MLD and IGMP messages to CPU_PORT */ - sw_w32((0x2 << 3) | 0x2, RTL931X_VLAN_APP_PKT_CTRL); - - /* Disable External CPU access to switch, clear EXT_CPU_EN */ - sw_w32_mask(BIT(2), 0, RTL931X_MAC_L2_GLOBAL_CTRL2); - - /* Set PCIE_PWR_DOWN */ - sw_w32_mask(0, BIT(1), RTL931X_PS_SOC_CTRL); - break; - } - - netif_tx_start_all_queues(ndev); - - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static void rtl838x_hw_stop(struct rtl838x_eth_priv *priv) -{ - u32 force_mac = priv->family_id == RTL8380_FAMILY_ID ? 0x6192C : 0x75; - u32 clear_irq = priv->family_id == RTL8380_FAMILY_ID ? 0x000fffff : 0x007fffff; - - /* Disable RX/TX from/to CPU-port */ - sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(priv->cpu_port)); - - /* Disable traffic */ - if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) - sw_w32_mask(RX_EN_93XX | TX_EN_93XX, 0, priv->r->dma_if_ctrl); - else - sw_w32_mask(RX_EN | TX_EN, 0, priv->r->dma_if_ctrl); - mdelay(200); /* Test, whether this is needed */ - - /* Block all ports */ - if (priv->family_id == RTL8380_FAMILY_ID) { - sw_w32(0x03000000, RTL838X_TBL_ACCESS_DATA_0(0)); - sw_w32(0x00000000, RTL838X_TBL_ACCESS_DATA_0(1)); - sw_w32(1 << 15 | 2 << 12, RTL838X_TBL_ACCESS_CTRL_0); - } - - /* Flush L2 address cache */ - if (priv->family_id == RTL8380_FAMILY_ID) { - for (int i = 0; i <= priv->cpu_port; i++) { - sw_w32(1 << 26 | 1 << 23 | i << 5, priv->r->l2_tbl_flush_ctrl); - do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & (1 << 26)); - } - } else if (priv->family_id == RTL8390_FAMILY_ID) { - for (int i = 0; i <= priv->cpu_port; i++) { - sw_w32(1 << 28 | 1 << 25 | i << 5, priv->r->l2_tbl_flush_ctrl); - do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & (1 << 28)); - } - } - /* TODO: L2 flush register is 64 bit on RTL931X and 930X */ - - /* CPU-Port: Link down */ - if (priv->family_id == RTL8380_FAMILY_ID || priv->family_id == RTL8390_FAMILY_ID) - sw_w32(force_mac, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); - else if (priv->family_id == RTL9300_FAMILY_ID) - sw_w32_mask(0x3, 0, priv->r->mac_force_mode_ctrl + priv->cpu_port *4); - else if (priv->family_id == RTL9310_FAMILY_ID) - sw_w32_mask(BIT(0) | BIT(9), 0, priv->r->mac_force_mode_ctrl + priv->cpu_port *4); - mdelay(100); - - /* Disable all TX/RX interrupts */ - if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) { - sw_w32(0x00000000, priv->r->dma_if_intr_rx_runout_msk); - sw_w32(0xffffffff, priv->r->dma_if_intr_rx_runout_sts); - sw_w32(0x00000000, priv->r->dma_if_intr_rx_done_msk); - sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_sts); - sw_w32(0x00000000, priv->r->dma_if_intr_tx_done_msk); - sw_w32(0x0000000f, priv->r->dma_if_intr_tx_done_sts); - } else { - sw_w32(0x00000000, priv->r->dma_if_intr_msk); - sw_w32(clear_irq, priv->r->dma_if_intr_sts); - } - - /* Disable TX/RX DMA */ - sw_w32(0x00000000, priv->r->dma_if_ctrl); - mdelay(200); -} - -static int rtl838x_eth_stop(struct net_device *ndev) -{ - struct rtl838x_eth_priv *priv = netdev_priv(ndev); - - pr_info("in %s\n", __func__); - - phylink_stop(priv->phylink); - rtl838x_hw_stop(priv); - - for (int i = 0; i < priv->rxrings; i++) - napi_disable(&priv->rx_qs[i].napi); - - netif_tx_stop_all_queues(ndev); - - return 0; -} - -static void rtl838x_eth_set_multicast_list(struct net_device *ndev) -{ - /* Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) - * CTRL_0_FULL = GENMASK(21, 0) = 0x3FFFFF - */ - if (!(ndev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - sw_w32(0x0, RTL838X_RMA_CTRL_0); - sw_w32(0x0, RTL838X_RMA_CTRL_1); - } - if (ndev->flags & IFF_ALLMULTI) - sw_w32(GENMASK(21, 0), RTL838X_RMA_CTRL_0); - if (ndev->flags & IFF_PROMISC) { - sw_w32(GENMASK(21, 0), RTL838X_RMA_CTRL_0); - sw_w32(0x7fff, RTL838X_RMA_CTRL_1); - } -} - -static void rtl839x_eth_set_multicast_list(struct net_device *ndev) -{ - /* Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) - * CTRL_0_FULL = GENMASK(31, 2) = 0xFFFFFFFC - * Lower two bits are reserved, corresponding to RMA 01-80-C2-00-00-00 - * CTRL_1_FULL = CTRL_2_FULL = GENMASK(31, 0) - */ - if (!(ndev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - sw_w32(0x0, RTL839X_RMA_CTRL_0); - sw_w32(0x0, RTL839X_RMA_CTRL_1); - sw_w32(0x0, RTL839X_RMA_CTRL_2); - sw_w32(0x0, RTL839X_RMA_CTRL_3); - } - if (ndev->flags & IFF_ALLMULTI) { - sw_w32(GENMASK(31, 2), RTL839X_RMA_CTRL_0); - sw_w32(GENMASK(31, 0), RTL839X_RMA_CTRL_1); - sw_w32(GENMASK(31, 0), RTL839X_RMA_CTRL_2); - } - if (ndev->flags & IFF_PROMISC) { - sw_w32(GENMASK(31, 2), RTL839X_RMA_CTRL_0); - sw_w32(GENMASK(31, 0), RTL839X_RMA_CTRL_1); - sw_w32(GENMASK(31, 0), RTL839X_RMA_CTRL_2); - sw_w32(0x3ff, RTL839X_RMA_CTRL_3); - } -} - -static void rtl930x_eth_set_multicast_list(struct net_device *ndev) -{ - /* Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) - * CTRL_0_FULL = GENMASK(31, 2) = 0xFFFFFFFC - * Lower two bits are reserved, corresponding to RMA 01-80-C2-00-00-00 - * CTRL_1_FULL = CTRL_2_FULL = GENMASK(31, 0) - */ - if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC)) { - sw_w32(GENMASK(31, 2), RTL930X_RMA_CTRL_0); - sw_w32(GENMASK(31, 0), RTL930X_RMA_CTRL_1); - sw_w32(GENMASK(31, 0), RTL930X_RMA_CTRL_2); - } else { - sw_w32(0x0, RTL930X_RMA_CTRL_0); - sw_w32(0x0, RTL930X_RMA_CTRL_1); - sw_w32(0x0, RTL930X_RMA_CTRL_2); - } -} - -static void rtl931x_eth_set_multicast_list(struct net_device *ndev) -{ - /* Flood all classes of RMA addresses (01-80-C2-00-00-{01..2F}) - * CTRL_0_FULL = GENMASK(31, 2) = 0xFFFFFFFC - * Lower two bits are reserved, corresponding to RMA 01-80-C2-00-00-00. - * CTRL_1_FULL = CTRL_2_FULL = GENMASK(31, 0) - */ - if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC)) { - sw_w32(GENMASK(31, 2), RTL931X_RMA_CTRL_0); - sw_w32(GENMASK(31, 0), RTL931X_RMA_CTRL_1); - sw_w32(GENMASK(31, 0), RTL931X_RMA_CTRL_2); - } else { - sw_w32(0x0, RTL931X_RMA_CTRL_0); - sw_w32(0x0, RTL931X_RMA_CTRL_1); - sw_w32(0x0, RTL931X_RMA_CTRL_2); - } -} - -static void rtl838x_eth_tx_timeout(struct net_device *ndev, unsigned int txqueue) -{ - unsigned long flags; - struct rtl838x_eth_priv *priv = netdev_priv(ndev); - - pr_warn("%s\n", __func__); - spin_lock_irqsave(&priv->lock, flags); - rtl838x_hw_stop(priv); - rtl838x_hw_ring_setup(priv); - rtl838x_hw_en_rxtx(priv); - netif_trans_update(ndev); - netif_start_queue(ndev); - spin_unlock_irqrestore(&priv->lock, flags); -} - -static int rtl838x_eth_tx(struct sk_buff *skb, struct net_device *dev) -{ - int len; - struct rtl838x_eth_priv *priv = netdev_priv(dev); - struct ring_b *ring = priv->membase; - int ret; - unsigned long flags; - struct p_hdr *h; - int dest_port = -1; - int q = skb_get_queue_mapping(skb) % TXRINGS; - - if (q) /* Check for high prio queue */ - pr_debug("SKB priority: %d\n", skb->priority); - - spin_lock_irqsave(&priv->lock, flags); - len = skb->len; - - /* Check for DSA tagging at the end of the buffer */ - if (netdev_uses_dsa(dev) && - skb->data[len - 4] == 0x80 && - skb->data[len - 3] < priv->cpu_port && - skb->data[len - 2] == 0x10 && - skb->data[len - 1] == 0x00) { - /* Reuse tag space for CRC if possible */ - dest_port = skb->data[len - 3]; - skb->data[len - 4] = skb->data[len - 3] = skb->data[len - 2] = skb->data[len - 1] = 0x00; - len -= 4; - } - - len += 4; /* Add space for CRC */ - - if (skb_padto(skb, len)) { - ret = NETDEV_TX_OK; - goto txdone; - } - - /* We can send this packet if CPU owns the descriptor */ - if (!(ring->tx_r[q][ring->c_tx[q]] & 0x1)) { - - /* Set descriptor for tx */ - h = &ring->tx_header[q][ring->c_tx[q]]; - h->size = len; - h->len = len; - /* On RTL8380 SoCs, small packet lengths being sent need adjustments */ - if (priv->family_id == RTL8380_FAMILY_ID) { - if (len < ETH_ZLEN - 4) - h->len -= 4; - } - - if (dest_port >= 0) - priv->r->create_tx_header(h, dest_port, skb->priority >> 1); - - /* Copy packet data to tx buffer */ - memcpy((void *)KSEG1ADDR(h->buf), skb->data, len); - /* Make sure packet data is visible to ASIC */ - wmb(); - - /* Hand over to switch */ - ring->tx_r[q][ring->c_tx[q]] |= 1; - - /* Before starting TX, prevent a Lextra bus bug on RTL8380 SoCs */ - if (priv->family_id == RTL8380_FAMILY_ID) { - for (int i = 0; i < 10; i++) { - u32 val = sw_r32(priv->r->dma_if_ctrl); - if ((val & 0xc) == 0xc) - break; - } - } - - /* Tell switch to send data */ - if (priv->family_id == RTL9310_FAMILY_ID || priv->family_id == RTL9300_FAMILY_ID) { - /* Ring ID q == 0: Low priority, Ring ID = 1: High prio queue */ - if (!q) - sw_w32_mask(0, BIT(2), priv->r->dma_if_ctrl); - else - sw_w32_mask(0, BIT(3), priv->r->dma_if_ctrl); - } else { - sw_w32_mask(0, TX_DO, priv->r->dma_if_ctrl); - } - - dev->stats.tx_packets++; - dev->stats.tx_bytes += len; - dev_kfree_skb(skb); - ring->c_tx[q] = (ring->c_tx[q] + 1) % TXRINGLEN; - ret = NETDEV_TX_OK; - } else { - dev_warn(&priv->pdev->dev, "Data is owned by switch\n"); - ret = NETDEV_TX_BUSY; - } - -txdone: - spin_unlock_irqrestore(&priv->lock, flags); - - return ret; -} - -/* Return queue number for TX. On the RTL83XX, these queues have equal priority - * so we do round-robin - */ -u16 rtl83xx_pick_tx_queue(struct net_device *dev, struct sk_buff *skb, - struct net_device *sb_dev) -{ - static u8 last = 0; - - last++; - return last % TXRINGS; -} - -/* Return queue number for TX. On the RTL93XX, queue 1 is the high priority queue - */ -u16 rtl93xx_pick_tx_queue(struct net_device *dev, struct sk_buff *skb, - struct net_device *sb_dev) -{ - if (skb->priority >= TC_PRIO_CONTROL) - return 1; - - return 0; -} - -static int rtl838x_hw_receive(struct net_device *dev, int r, int budget) -{ - struct rtl838x_eth_priv *priv = netdev_priv(dev); - struct ring_b *ring = priv->membase; - LIST_HEAD(rx_list); - unsigned long flags; - int work_done = 0; - u32 *last; - bool dsa = netdev_uses_dsa(dev); - - pr_debug("---------------------------------------------------------- RX - %d\n", r); - spin_lock_irqsave(&priv->lock, flags); - last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4)); - - do { - struct sk_buff *skb; - struct dsa_tag tag; - struct p_hdr *h; - u8 *skb_data; - u8 *data; - int len; - - if ((ring->rx_r[r][ring->c_rx[r]] & 0x1)) { - if (&ring->rx_r[r][ring->c_rx[r]] != last) { - netdev_warn(dev, "Ring contention: r: %x, last %x, cur %x\n", - r, (uint32_t)last, (u32) &ring->rx_r[r][ring->c_rx[r]]); - } - break; - } - - h = &ring->rx_header[r][ring->c_rx[r]]; - data = (u8 *)KSEG1ADDR(h->buf); - len = h->len; - if (!len) - break; - work_done++; - - len -= 4; /* strip the CRC */ - /* Add 4 bytes for cpu_tag */ - if (dsa) - len += 4; - - skb = netdev_alloc_skb(dev, len + 4); - skb_reserve(skb, NET_IP_ALIGN); - - if (likely(skb)) { - /* BUG: Prevent bug on RTL838x SoCs */ - if (priv->family_id == RTL8380_FAMILY_ID) { - sw_w32(0xffffffff, priv->r->dma_if_rx_ring_size(0)); - for (int i = 0; i < priv->rxrings; i++) { - unsigned int val; - - /* Update each ring cnt */ - val = sw_r32(priv->r->dma_if_rx_ring_cntr(i)); - sw_w32(val, priv->r->dma_if_rx_ring_cntr(i)); - } - } - - skb_data = skb_put(skb, len); - /* Make sure data is visible */ - mb(); - memcpy(skb->data, (u8 *)KSEG1ADDR(data), len); - /* Overwrite CRC with cpu_tag */ - if (dsa) { - priv->r->decode_tag(h, &tag); - skb->data[len - 4] = 0x80; - skb->data[len - 3] = tag.port; - skb->data[len - 2] = 0x10; - skb->data[len - 1] = 0x00; - if (tag.l2_offloaded) - skb->data[len - 3] |= 0x40; - } - - if (tag.queue >= 0) - pr_debug("Queue: %d, len: %d, reason %d port %d\n", - tag.queue, len, tag.reason, tag.port); - - skb->protocol = eth_type_trans(skb, dev); - if (dev->features & NETIF_F_RXCSUM) { - if (tag.crc_error) - skb_checksum_none_assert(skb); - else - skb->ip_summed = CHECKSUM_UNNECESSARY; - } - dev->stats.rx_packets++; - dev->stats.rx_bytes += len; - - list_add_tail(&skb->list, &rx_list); - } else { - if (net_ratelimit()) - dev_warn(&dev->dev, "low on memory - packet dropped\n"); - dev->stats.rx_dropped++; - } - - /* Reset header structure */ - memset(h, 0, sizeof(struct p_hdr)); - h->buf = data; - h->size = RING_BUFFER; - - ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1 | (ring->c_rx[r] == (priv->rxringlen - 1) ? - WRAP : - 0x1); - ring->c_rx[r] = (ring->c_rx[r] + 1) % priv->rxringlen; - last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4)); - } while (&ring->rx_r[r][ring->c_rx[r]] != last && work_done < budget); - - netif_receive_skb_list(&rx_list); - - /* Update counters */ - priv->r->update_cntr(r, 0); - - spin_unlock_irqrestore(&priv->lock, flags); - - return work_done; -} - -static int rtl838x_poll_rx(struct napi_struct *napi, int budget) -{ - struct rtl838x_rx_q *rx_q = container_of(napi, struct rtl838x_rx_q, napi); - struct rtl838x_eth_priv *priv = rx_q->priv; - int work_done = 0; - int r = rx_q->id; - int work; - - while (work_done < budget) { - work = rtl838x_hw_receive(priv->netdev, r, budget - work_done); - if (!work) - break; - work_done += work; - } - - if (work_done < budget) { - napi_complete_done(napi, work_done); - - /* Enable RX interrupt */ - if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) - sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_msk); - else - sw_w32_mask(0, 0xf00ff | BIT(r + 8), priv->r->dma_if_intr_msk); - } - - return work_done; -} - - -static void rtl838x_validate(struct phylink_config *config, - unsigned long *supported, - struct phylink_link_state *state) -{ - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - - pr_debug("In %s\n", __func__); - - if (!phy_interface_mode_is_rgmii(state->interface) && - state->interface != PHY_INTERFACE_MODE_1000BASEX && - state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_REVMII && - state->interface != PHY_INTERFACE_MODE_GMII && - state->interface != PHY_INTERFACE_MODE_QSGMII && - state->interface != PHY_INTERFACE_MODE_INTERNAL && - state->interface != PHY_INTERFACE_MODE_SGMII) { - bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); - pr_err("Unsupported interface: %d\n", state->interface); - return; - } - - /* Allow all the expected bits */ - phylink_set(mask, Autoneg); - phylink_set_port_modes(mask); - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - - /* With the exclusion of MII and Reverse MII, we support Gigabit, - * including Half duplex - */ - if (state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_REVMII) { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseT_Half); - } - - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); - - bitmap_and(supported, supported, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_and(state->advertising, state->advertising, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); -} - - -static void rtl838x_mac_config(struct phylink_config *config, - unsigned int mode, - const struct phylink_link_state *state) -{ - /* This is only being called for the master device, - * i.e. the CPU-Port. We don't need to do anything. - */ - - pr_info("In %s, mode %x\n", __func__, mode); -} - -static void rtl838x_mac_an_restart(struct phylink_config *config) -{ - struct net_device *dev = container_of(config->dev, struct net_device, dev); - struct rtl838x_eth_priv *priv = netdev_priv(dev); - - /* This works only on RTL838x chips */ - if (priv->family_id != RTL8380_FAMILY_ID) - return; - - pr_debug("In %s\n", __func__); - /* Restart by disabling and re-enabling link */ - sw_w32(0x6192D, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); - mdelay(20); - sw_w32(0x6192F, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); -} - -static void rtl838x_mac_pcs_get_state(struct phylink_config *config, - struct phylink_link_state *state) -{ - u32 speed; - struct net_device *dev = container_of(config->dev, struct net_device, dev); - struct rtl838x_eth_priv *priv = netdev_priv(dev); - int port = priv->cpu_port; - - pr_info("In %s\n", __func__); - - state->link = priv->r->get_mac_link_sts(port) ? 1 : 0; - state->duplex = priv->r->get_mac_link_dup_sts(port) ? 1 : 0; - - pr_info("%s link status is %d\n", __func__, state->link); - speed = priv->r->get_mac_link_spd_sts(port); - switch (speed) { - case 0: - state->speed = SPEED_10; - break; - case 1: - state->speed = SPEED_100; - break; - case 2: - state->speed = SPEED_1000; - break; - case 5: - state->speed = SPEED_2500; - break; - case 6: - state->speed = SPEED_5000; - break; - case 4: - state->speed = SPEED_10000; - break; - default: - state->speed = SPEED_UNKNOWN; - break; - } - - state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX); - if (priv->r->get_mac_rx_pause_sts(port)) - state->pause |= MLO_PAUSE_RX; - if (priv->r->get_mac_tx_pause_sts(port)) - state->pause |= MLO_PAUSE_TX; -} - -static void rtl838x_mac_link_down(struct phylink_config *config, - unsigned int mode, - phy_interface_t interface) -{ - struct net_device *dev = container_of(config->dev, struct net_device, dev); - struct rtl838x_eth_priv *priv = netdev_priv(dev); - - pr_debug("In %s\n", __func__); - /* Stop TX/RX to port */ - sw_w32_mask(0x03, 0, priv->r->mac_port_ctrl(priv->cpu_port)); -} - -static void rtl838x_mac_link_up(struct phylink_config *config, - struct phy_device *phy, unsigned int mode, - phy_interface_t interface, int speed, int duplex, - bool tx_pause, bool rx_pause) -{ - struct net_device *dev = container_of(config->dev, struct net_device, dev); - struct rtl838x_eth_priv *priv = netdev_priv(dev); - - pr_debug("In %s\n", __func__); - /* Restart TX/RX to port */ - sw_w32_mask(0, 0x03, priv->r->mac_port_ctrl(priv->cpu_port)); -} - -static void rtl838x_set_mac_hw(struct net_device *dev, u8 *mac) -{ - struct rtl838x_eth_priv *priv = netdev_priv(dev); - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - pr_debug("In %s\n", __func__); - sw_w32((mac[0] << 8) | mac[1], priv->r->mac); - sw_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], priv->r->mac + 4); - - if (priv->family_id == RTL8380_FAMILY_ID) { - /* 2 more registers, ALE/MAC block */ - sw_w32((mac[0] << 8) | mac[1], RTL838X_MAC_ALE); - sw_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], - (RTL838X_MAC_ALE + 4)); - - sw_w32((mac[0] << 8) | mac[1], RTL838X_MAC2); - sw_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], - RTL838X_MAC2 + 4); - } - spin_unlock_irqrestore(&priv->lock, flags); -} - -static int rtl838x_set_mac_address(struct net_device *dev, void *p) -{ - struct rtl838x_eth_priv *priv = netdev_priv(dev); - const struct sockaddr *addr = p; - u8 *mac = (u8 *) (addr->sa_data); - - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - dev_addr_set(dev, addr->sa_data); - rtl838x_set_mac_hw(dev, mac); - - pr_info("Using MAC %08x%08x\n", sw_r32(priv->r->mac), sw_r32(priv->r->mac + 4)); - - return 0; -} - -static int rtl8390_init_mac(struct rtl838x_eth_priv *priv) -{ - /* We will need to set-up EEE and the egress-rate limitation */ - return 0; -} - -static int rtl8380_init_mac(struct rtl838x_eth_priv *priv) -{ - if (priv->family_id == 0x8390) - return rtl8390_init_mac(priv); - - /* At present we do not know how to set up EEE on any other SoC than RTL8380 */ - if (priv->family_id != 0x8380) - return 0; - - pr_info("%s\n", __func__); - /* fix timer for EEE */ - sw_w32(0x5001411, RTL838X_EEE_TX_TIMER_GIGA_CTRL); - sw_w32(0x5001417, RTL838X_EEE_TX_TIMER_GELITE_CTRL); - - /* Init VLAN. TODO: Understand what is being done, here */ - if (priv->id == 0x8382) { - for (int i = 0; i <= 28; i++) - sw_w32(0, 0xd57c + i * 0x80); - } - if (priv->id == 0x8380) { - for (int i = 8; i <= 28; i++) - sw_w32(0, 0xd57c + i * 0x80); - } - - return 0; -} - -static int rtl838x_get_link_ksettings(struct net_device *ndev, - struct ethtool_link_ksettings *cmd) -{ - struct rtl838x_eth_priv *priv = netdev_priv(ndev); - - pr_debug("%s called\n", __func__); - - return phylink_ethtool_ksettings_get(priv->phylink, cmd); -} - -static int rtl838x_set_link_ksettings(struct net_device *ndev, - const struct ethtool_link_ksettings *cmd) -{ - struct rtl838x_eth_priv *priv = netdev_priv(ndev); - - pr_debug("%s called\n", __func__); - - return phylink_ethtool_ksettings_set(priv->phylink, cmd); -} - -/* - * On all Realtek switch platforms the hardware periodically reads the link status of all - * PHYs. This is to some degree programmable, so that one can tell the hardware to read - * specific C22 registers from specific pages, or C45 registers, to determine the current - * link speed, duplex, flow-control, ... - * - * This happens without any need for the driver to do anything at runtime, completely - * invisible and in a parallel hardware thread, independent of the CPU running Linux. - * All one needs to do is to set it up once. Having the MAC link settings automatically - * follow the PHY link status also happens to be the only way to control MAC port status - * in a meaningful way, or at least it's the only way we fully understand, as this is - * what every vendor firmware is doing. - * - * The hardware PHY polling unit doesn't care about bus locking, it just assumes that all - * paged PHY operations are also done via the same hardware unit offering this PHY access - * abstractions. - * - * Additionally at least the RTL838x and RTL839x devices are known to have a so called - * raw mode. Using the special MAX_PAGE-1 with the MDIO controller found in Realtek - * SoCs allows to access the PHY in raw mode, ie. bypassing the cache and paging engine - * of the MDIO controller. E.g. for RTL838x this is 0xfff. - * - * On the other hand Realtek PHYs usually make use of select register 0x1f to switch - * pages. There is no problem to issue separate page and access bus calls to the PHYs - * when they are not attached to an Realtek SoC. The paradigm should be to keep the PHY - * implementation bus independent. - * - * As if this is not enough the PHY packages consist of 4 or 8 ports that all can be - * programmed individually. Some registers are only available on port 0 and configure - * the whole package. - * - * To bring all this together we need a tricky bus design that intercepts select page - * calls but lets raw page accesses through. And especially knows how to handle raw - * accesses to the select register. Additionally we need the possibility to write to - * all 8 ports of the PHY individually. - * - * While the C45 clause stuff is pretty standard the legacy functions basically track - * the accesses and the state of the bus with the attributes page[], raw[] and portaddr - * of the bus_priv structure. The page selection works as follows: - * - * phy_write(phydev, RTMDIO_PAGE_SELECT, 12) : store internal page 12 in driver - * phy_write(phydev, 7, 33) : write page=12, reg=7, val=33 - * - * or simply - * - * phy_write_paged(phydev, 12, 7, 33) : write page=12, reg=7, val=33 - * - * The port selection works as follows and must be called under a held mdio bus lock - * - * __mdiobus_write(bus, RTMDIO_PORT_SELECT, 4) : switch to port 4 - * __phy_write(phydev, RTMDIO_PAGE_SELECT, 11) : store internal page 11 in driver - * __phy_write(phydev, 8, 19) : write page=11, reg=8, val=19, port=4 - * - * Any Realtek PHY that will be connected to this bus must simply provide the standard - * page functions: - * - * define RTL821X_PAGE_SELECT 0x1f - * - * static int rtl821x_read_page(struct phy_device *phydev) - * { - * return __phy_read(phydev, RTL821X_PAGE_SELECT); - * } - * - * static int rtl821x_write_page(struct phy_device *phydev, int page) - * { - * return __phy_write(phydev, RTL821X_PAGE_SELECT, page); - * } - * - * In case there are non Realtek PHYs attached to the bus the logic might need to be - * reimplemented. For now it should be sufficient. - */ - -#define RTMDIO_PAGE_SELECT 0x1f -#define RTMDIO_PORT_SELECT 0x2000 -#define RTMDIO_READ 0x1 -#define RTMDIO_WRITE 0x2 -#define RTMDIO_ABS 0x4 -#define RTMDIO_PKG 0x8 - -/* - * Provide a generic read/write function so we can access arbitrary ports on the bus. - * E.g. other ports of a PHY package on the bus. This basically resembles the kernel - * phy_read_paged() and phy_write_paged() functions. To inform the bus that we are - * working on a not default port send a RTMDIO_PORT_SELECT command at the beginning - * and the end to switch the port handling logic. - */ - -static int rtmdio_access(struct phy_device *phydev, int op, int port, - int page, u32 regnum, u16 val) -{ - int r, ret = 0, oldpage; - - if (op & RTMDIO_PKG) { - if (!phydev->shared) - return -EIO; - port = phydev->shared->addr + port; - } - - /* lock and inform bus about non default addressing */ - phy_lock_mdio_bus(phydev); - __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, - RTMDIO_PORT_SELECT, port); - - oldpage = ret = __phy_read(phydev, RTMDIO_PAGE_SELECT); - if (oldpage >= 0 && oldpage != page) { - ret = __phy_write(phydev, RTMDIO_PAGE_SELECT, page); - if (ret < 0) - oldpage = ret; - } - - if (oldpage >= 0) { - if (op & RTMDIO_WRITE) - ret = __phy_write(phydev, regnum, val); - else - ret = __phy_read(phydev, regnum); - } - - if (oldpage >= 0) { - r = __phy_write(phydev, RTMDIO_PAGE_SELECT, oldpage); - if (ret >= 0 && r < 0) - ret = r; - } else - ret = oldpage; - - /* reset bus to default adressing and unlock it */ - __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, - RTMDIO_PORT_SELECT, -1); - phy_unlock_mdio_bus(phydev); - - return ret; -} - -/* - * To make use of the shared package functions provide wrappers that align with kernel - * naming conventions. The package() functions are useful to change settings on the - * package as a whole. The package_port() functions will allow to target the PHYs - * of a package individually. The port() only functions allow to access arbitrary ports - * on the bus through a PHY. - */ - -int phy_package_port_write_paged(struct phy_device *phydev, int port, int page, u32 regnum, u16 val) -{ - return rtmdio_access(phydev, RTMDIO_WRITE | RTMDIO_PKG, port, page, regnum, val); -} - -int phy_package_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val) -{ - return rtmdio_access(phydev, RTMDIO_WRITE | RTMDIO_PKG, 0, page, regnum, val); -} - -int phy_port_write_paged(struct phy_device *phydev, int port, int page, u32 regnum, u16 val) -{ - return rtmdio_access(phydev, RTMDIO_WRITE | RTMDIO_ABS, port, page, regnum, val); -} - -int phy_package_port_read_paged(struct phy_device *phydev, int port, int page, u32 regnum) -{ - return rtmdio_access(phydev, RTMDIO_READ | RTMDIO_PKG, port, page, regnum, 0); -} - -int phy_package_read_paged(struct phy_device *phydev, int page, u32 regnum) -{ - return rtmdio_access(phydev, RTMDIO_READ | RTMDIO_PKG, 0, page, regnum, 0); -} - -int phy_port_read_paged(struct phy_device *phydev, int port, int page, u32 regnum) -{ - return rtmdio_access(phydev, RTMDIO_READ | RTMDIO_ABS, port, page, regnum, 0); -} - -/* These are the core functions of our new Realtek SoC MDIO bus. */ - -static int rtmdio_read_c45(struct mii_bus *bus, int addr, int devnum, int regnum) -{ - int err, val; - struct rtl838x_bus_priv *bus_priv = bus->priv; - - if (bus_priv->extaddr >= 0) - addr = bus_priv->extaddr; - - err = (*bus_priv->read_mmd_phy)(addr, devnum, regnum, &val); - pr_debug("rd_MMD(adr=%d, dev=%d, reg=%d) = %d, err = %d\n", - addr, devnum, regnum, val, err); - return err ? err : val; -} - -static int rtmdio_83xx_read(struct mii_bus *bus, int addr, int regnum) -{ - int err, val; - struct rtl838x_bus_priv *bus_priv = bus->priv; - struct rtl838x_eth_priv *eth_priv = bus_priv->eth_priv; - - if (bus_priv->extaddr >= 0) - addr = bus_priv->extaddr; - - if (addr >= 24 && addr <= 27 && eth_priv->id == 0x8380) - return rtl838x_read_sds_phy(addr, regnum); - - if (eth_priv->family_id == RTL8390_FAMILY_ID && eth_priv->phy_is_internal[addr]) - return rtl839x_read_sds_phy(addr, regnum); - - if (regnum == RTMDIO_PAGE_SELECT && bus_priv->page[addr] != bus_priv->rawpage) - return bus_priv->page[addr]; - - bus_priv->raw[addr] = (bus_priv->page[addr] == bus_priv->rawpage); - err = (*bus_priv->read_phy)(addr, bus_priv->page[addr], regnum, &val); - pr_debug("rd_PHY(adr=%d, pag=%d, reg=%d) = %d, err = %d\n", - addr, bus_priv->page[addr], regnum, val, err); - return err ? err : val; -} - -static int rtmdio_93xx_read(struct mii_bus *bus, int addr, int regnum) -{ - int err, val; - struct rtl838x_bus_priv *bus_priv = bus->priv; - struct rtl838x_eth_priv *eth_priv = bus_priv->eth_priv; - - if (bus_priv->extaddr >= 0) - addr = bus_priv->extaddr; - - if (regnum == RTMDIO_PAGE_SELECT && bus_priv->page[addr] != bus_priv->rawpage) - return bus_priv->page[addr]; - - bus_priv->raw[addr] = (bus_priv->page[addr] == bus_priv->rawpage); - if (eth_priv->phy_is_internal[addr]) { - if (eth_priv->family_id == RTL9300_FAMILY_ID) - return rtl930x_read_sds_phy(eth_priv->sds_id[addr], - bus_priv->page[addr], regnum); - else - return rtl931x_read_sds_phy(eth_priv->sds_id[addr], - bus_priv->page[addr], regnum); - } - - err = (*bus_priv->read_phy)(addr, bus_priv->page[addr], regnum, &val); - pr_debug("rd_PHY(adr=%d, pag=%d, reg=%d) = %d, err = %d\n", - addr, bus_priv->page[addr], regnum, val, err); - return err ? err : val; -} - -static int rtmdio_write_c45(struct mii_bus *bus, int addr, int devnum, int regnum, u16 val) -{ - int err; - struct rtl838x_bus_priv *bus_priv = bus->priv; - - if (bus_priv->extaddr >= 0) - addr = bus_priv->extaddr; - - err = (*bus_priv->write_mmd_phy)(addr, devnum, regnum, val); - pr_debug("wr_MMD(adr=%d, dev=%d, reg=%d, val=%d) err = %d\n", - addr, devnum, regnum, val, err); - return err; -} - -static int rtmdio_83xx_write(struct mii_bus *bus, int addr, int regnum, u16 val) -{ - int err, page, offset = 0; - struct rtl838x_bus_priv *bus_priv = bus->priv; - struct rtl838x_eth_priv *eth_priv = bus_priv->eth_priv; - - if (regnum == RTMDIO_PORT_SELECT) { - bus_priv->extaddr = (s16)val; - return 0; - } - - if (bus_priv->extaddr >= 0) - addr = bus_priv->extaddr; - page = bus_priv->page[addr]; - - if (addr >= 24 && addr <= 27 && eth_priv->id == 0x8380) { - if (addr == 26) - offset = 0x100; - sw_w32(val, RTL838X_SDS4_FIB_REG0 + offset + (regnum << 2)); - return 0; - } - - if (eth_priv->family_id == RTL8390_FAMILY_ID && eth_priv->phy_is_internal[addr]) - return rtl839x_write_sds_phy(addr, regnum, val); - - if (regnum == RTMDIO_PAGE_SELECT) - bus_priv->page[addr] = val; - - if (!bus_priv->raw[addr] && (regnum != RTMDIO_PAGE_SELECT || page == bus_priv->rawpage)) { - bus_priv->raw[addr] = (page == bus_priv->rawpage); - err = (*bus_priv->write_phy)(addr, page, regnum, val); - pr_debug("wr_PHY(adr=%d, pag=%d, reg=%d, val=%d) err = %d\n", - addr, page, regnum, val, err); - return err; - } - - bus_priv->raw[addr] = false; - return 0; -} - -static int rtmdio_93xx_write(struct mii_bus *bus, int addr, int regnum, u16 val) -{ - int err, page; - struct rtl838x_bus_priv *bus_priv = bus->priv; - struct rtl838x_eth_priv *eth_priv = bus_priv->eth_priv; - - if (regnum == RTMDIO_PORT_SELECT) { - bus_priv->extaddr = (s16)val; - return 0; - } - - if (bus_priv->extaddr >= 0) - addr = bus_priv->extaddr; - page = bus_priv->page[addr]; - - if (regnum == RTMDIO_PAGE_SELECT) - bus_priv->page[addr] = val; - - if (!bus_priv->raw[addr] && (regnum != RTMDIO_PAGE_SELECT || page == bus_priv->rawpage)) { - bus_priv->raw[addr] = (page == bus_priv->rawpage); - if (eth_priv->phy_is_internal[addr]) { - if (eth_priv->family_id == RTL9300_FAMILY_ID) - return rtl930x_write_sds_phy(eth_priv->sds_id[addr], - page, regnum, val); - else - return rtl931x_write_sds_phy(eth_priv->sds_id[addr], - page, regnum, val); - } - - err = (*bus_priv->write_phy)(addr, page, regnum, val); - pr_debug("wr_PHY(adr=%d, pag=%d, reg=%d, val=%d) err = %d\n", - addr, page, regnum, val, err); - } - - bus_priv->raw[addr] = false; - return 0; -} - -/* These wrappers can be dropped after switch to kernel 6.6 */ - -static int rtmdio_83xx_read_legacy(struct mii_bus *bus, int addr, int regnum) -{ - if (regnum & MII_ADDR_C45) - return rtmdio_read_c45(bus, addr, mdiobus_c45_devad(regnum), - mdiobus_c45_regad(regnum)); - else - return rtmdio_83xx_read(bus, addr, regnum); -} - -static int rtmdio_93xx_read_legacy(struct mii_bus *bus, int addr, int regnum) -{ - if (regnum & MII_ADDR_C45) - return rtmdio_read_c45(bus, addr, mdiobus_c45_devad(regnum), - mdiobus_c45_regad(regnum)); - else - return rtmdio_93xx_read(bus, addr, regnum); -} - -static int rtmdio_83xx_write_legacy(struct mii_bus *bus, int addr, int regnum, u16 val) -{ - if (regnum & MII_ADDR_C45) - return rtmdio_write_c45(bus, addr, mdiobus_c45_devad(regnum), - mdiobus_c45_regad(regnum), val); - else - return rtmdio_83xx_write(bus, addr, regnum, val); -} - -static int rtmdio_93xx_write_legacy(struct mii_bus *bus, int addr, int regnum, u16 val) -{ - if (regnum & MII_ADDR_C45) - return rtmdio_write_c45(bus, addr, mdiobus_c45_devad(regnum), - mdiobus_c45_regad(regnum), val); - else - return rtmdio_93xx_write(bus, addr, regnum, val); -} - -static int rtmdio_838x_reset(struct mii_bus *bus) -{ - pr_debug("%s called\n", __func__); - /* Disable MAC polling the PHY so that we can start configuration */ - sw_w32(0x00000000, RTL838X_SMI_POLL_CTRL); - - /* Enable PHY control via SoC */ - sw_w32_mask(0, 1 << 15, RTL838X_SMI_GLB_CTRL); - - /* Probably should reset all PHYs here... */ - return 0; -} - -static int rtmdio_839x_reset(struct mii_bus *bus) -{ - return 0; - - pr_debug("%s called\n", __func__); - /* BUG: The following does not work, but should! */ - /* Disable MAC polling the PHY so that we can start configuration */ - sw_w32(0x00000000, RTL839X_SMI_PORT_POLLING_CTRL); - sw_w32(0x00000000, RTL839X_SMI_PORT_POLLING_CTRL + 4); - /* Disable PHY polling via SoC */ - sw_w32_mask(1 << 7, 0, RTL839X_SMI_GLB_CTRL); - - /* Probably should reset all PHYs here... */ - return 0; -} - -u8 mac_type_bit[RTL930X_CPU_PORT] = {0, 0, 0, 0, 2, 2, 2, 2, 4, 4, 4, 4, 6, 6, 6, 6, - 8, 8, 8, 8, 10, 10, 10, 10, 12, 15, 18, 21}; - -static int rtmdio_930x_reset(struct mii_bus *bus) -{ - struct rtl838x_bus_priv *bus_priv = bus->priv; - struct rtl838x_eth_priv *priv = bus_priv->eth_priv; - u32 c45_mask = 0; - u32 poll_sel[2]; - u32 poll_ctrl = 0; - u32 private_poll_mask = 0; - u32 v; - bool uses_usxgmii = false; /* For the Aquantia PHYs */ - bool uses_hisgmii = false; /* For the RTL8221/8226 */ - - /* Mapping of port to phy-addresses on an SMI bus */ - poll_sel[0] = poll_sel[1] = 0; - for (int i = 0; i < RTL930X_CPU_PORT; i++) { - int pos; - - if (priv->smi_bus[i] > 3) - continue; - pos = (i % 6) * 5; - sw_w32_mask(0x1f << pos, priv->smi_addr[i] << pos, - RTL930X_SMI_PORT0_5_ADDR + (i / 6) * 4); - - pos = (i * 2) % 32; - poll_sel[i / 16] |= priv->smi_bus[i] << pos; - poll_ctrl |= BIT(20 + priv->smi_bus[i]); - } - - /* Configure which SMI bus is behind which port number */ - sw_w32(poll_sel[0], RTL930X_SMI_PORT0_15_POLLING_SEL); - sw_w32(poll_sel[1], RTL930X_SMI_PORT16_27_POLLING_SEL); - - /* Disable POLL_SEL for any SMI bus with a normal PHY (not RTL8295R for SFP+) */ - sw_w32_mask(poll_ctrl, 0, RTL930X_SMI_GLB_CTRL); - - /* Configure which SMI busses are polled in c45 based on a c45 PHY being on that bus */ - for (int i = 0; i < 4; i++) - if (priv->smi_bus_isc45[i]) - c45_mask |= BIT(i + 16); - - pr_info("c45_mask: %08x\n", c45_mask); - sw_w32_mask(0, c45_mask, RTL930X_SMI_GLB_CTRL); - - /* Set the MAC type of each port according to the PHY-interface */ - /* Values are FE: 2, GE: 3, XGE/2.5G: 0(SERDES) or 1(otherwise), SXGE: 0 */ - v = 0; - for (int i = 0; i < RTL930X_CPU_PORT; i++) { - switch (priv->interfaces[i]) { - case PHY_INTERFACE_MODE_10GBASER: - break; /* Serdes: Value = 0 */ - case PHY_INTERFACE_MODE_HSGMII: - private_poll_mask |= BIT(i); - fallthrough; - case PHY_INTERFACE_MODE_USXGMII: - v |= BIT(mac_type_bit[i]); - uses_usxgmii = true; - break; - case PHY_INTERFACE_MODE_QSGMII: - private_poll_mask |= BIT(i); - v |= 3 << mac_type_bit[i]; - break; - default: - break; - } - } - sw_w32(v, RTL930X_SMI_MAC_TYPE_CTRL); - - /* Set the private polling mask for all Realtek PHYs (i.e. not the 10GBit Aquantia ones) */ - sw_w32(private_poll_mask, RTL930X_SMI_PRVTE_POLLING_CTRL); - - /* The following magic values are found in the port configuration, they seem to - * define different ways of polling a PHY. The below is for the Aquantia PHYs of - * the XGS1250 and the RTL8226 of the XGS1210 - */ - if (uses_usxgmii) { - sw_w32(0x01010000, RTL930X_SMI_10GPHY_POLLING_REG0_CFG); - sw_w32(0x01E7C400, RTL930X_SMI_10GPHY_POLLING_REG9_CFG); - sw_w32(0x01E7E820, RTL930X_SMI_10GPHY_POLLING_REG10_CFG); - } - if (uses_hisgmii) { - sw_w32(0x011FA400, RTL930X_SMI_10GPHY_POLLING_REG0_CFG); - sw_w32(0x013FA412, RTL930X_SMI_10GPHY_POLLING_REG9_CFG); - sw_w32(0x017FA414, RTL930X_SMI_10GPHY_POLLING_REG10_CFG); - } - - pr_debug("%s: RTL930X_SMI_GLB_CTRL %08x\n", __func__, - sw_r32(RTL930X_SMI_GLB_CTRL)); - pr_debug("%s: RTL930X_SMI_PORT0_15_POLLING_SEL %08x\n", __func__, - sw_r32(RTL930X_SMI_PORT0_15_POLLING_SEL)); - pr_debug("%s: RTL930X_SMI_PORT16_27_POLLING_SEL %08x\n", __func__, - sw_r32(RTL930X_SMI_PORT16_27_POLLING_SEL)); - pr_debug("%s: RTL930X_SMI_MAC_TYPE_CTRL %08x\n", __func__, - sw_r32(RTL930X_SMI_MAC_TYPE_CTRL)); - pr_debug("%s: RTL930X_SMI_10GPHY_POLLING_REG0_CFG %08x\n", __func__, - sw_r32(RTL930X_SMI_10GPHY_POLLING_REG0_CFG)); - pr_debug("%s: RTL930X_SMI_10GPHY_POLLING_REG9_CFG %08x\n", __func__, - sw_r32(RTL930X_SMI_10GPHY_POLLING_REG9_CFG)); - pr_debug("%s: RTL930X_SMI_10GPHY_POLLING_REG10_CFG %08x\n", __func__, - sw_r32(RTL930X_SMI_10GPHY_POLLING_REG10_CFG)); - pr_debug("%s: RTL930X_SMI_PRVTE_POLLING_CTRL %08x\n", __func__, - sw_r32(RTL930X_SMI_PRVTE_POLLING_CTRL)); - - return 0; -} - -static int rtmdio_931x_reset(struct mii_bus *bus) -{ - struct rtl838x_bus_priv *bus_priv = bus->priv; - struct rtl838x_eth_priv *priv = bus_priv->eth_priv; - u32 c45_mask = 0; - u32 poll_sel[4]; - u32 poll_ctrl = 0; - bool mdc_on[4]; - - pr_info("%s called\n", __func__); - /* Disable port polling for configuration purposes */ - sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL); - sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL + 4); - msleep(100); - - mdc_on[0] = mdc_on[1] = mdc_on[2] = mdc_on[3] = false; - /* Mapping of port to phy-addresses on an SMI bus */ - poll_sel[0] = poll_sel[1] = poll_sel[2] = poll_sel[3] = 0; - for (int i = 0; i < 56; i++) { - u32 pos; - - pos = (i % 6) * 5; - sw_w32_mask(0x1f << pos, priv->smi_addr[i] << pos, RTL931X_SMI_PORT_ADDR + (i / 6) * 4); - pos = (i * 2) % 32; - poll_sel[i / 16] |= priv->smi_bus[i] << pos; - poll_ctrl |= BIT(20 + priv->smi_bus[i]); - mdc_on[priv->smi_bus[i]] = true; - } - - /* Configure which SMI bus is behind which port number */ - for (int i = 0; i < 4; i++) { - pr_info("poll sel %d, %08x\n", i, poll_sel[i]); - sw_w32(poll_sel[i], RTL931X_SMI_PORT_POLLING_SEL + (i * 4)); - } - - /* Configure which SMI busses */ - pr_info("%s: WAS RTL931X_MAC_L2_GLOBAL_CTRL2 %08x\n", __func__, sw_r32(RTL931X_MAC_L2_GLOBAL_CTRL2)); - pr_info("c45_mask: %08x, RTL931X_SMI_GLB_CTRL0 was %X", c45_mask, sw_r32(RTL931X_SMI_GLB_CTRL0)); - for (int i = 0; i < 4; i++) { - /* bus is polled in c45 */ - if (priv->smi_bus_isc45[i]) - c45_mask |= 0x2 << (i * 2); /* Std. C45, non-standard is 0x3 */ - /* Enable bus access via MDC */ - if (mdc_on[i]) - sw_w32_mask(0, BIT(9 + i), RTL931X_MAC_L2_GLOBAL_CTRL2); - } - - pr_info("%s: RTL931X_MAC_L2_GLOBAL_CTRL2 %08x\n", __func__, sw_r32(RTL931X_MAC_L2_GLOBAL_CTRL2)); - pr_info("c45_mask: %08x, RTL931X_SMI_GLB_CTRL0 was %X", c45_mask, sw_r32(RTL931X_SMI_GLB_CTRL0)); - - /* We have a 10G PHY enable polling - * sw_w32(0x01010000, RTL931X_SMI_10GPHY_POLLING_SEL2); - * sw_w32(0x01E7C400, RTL931X_SMI_10GPHY_POLLING_SEL3); - * sw_w32(0x01E7E820, RTL931X_SMI_10GPHY_POLLING_SEL4); - */ - sw_w32_mask(0xff, c45_mask, RTL931X_SMI_GLB_CTRL1); - - return 0; -} - -static int rtl931x_chip_init(struct rtl838x_eth_priv *priv) -{ - pr_info("In %s\n", __func__); - - /* Initialize Encapsulation memory and wait until finished */ - sw_w32(0x1, RTL931X_MEM_ENCAP_INIT); - do { } while (sw_r32(RTL931X_MEM_ENCAP_INIT) & 1); - pr_info("%s: init ENCAP done\n", __func__); - - /* Initialize Managemen Information Base memory and wait until finished */ - sw_w32(0x1, RTL931X_MEM_MIB_INIT); - do { } while (sw_r32(RTL931X_MEM_MIB_INIT) & 1); - pr_info("%s: init MIB done\n", __func__); - - /* Initialize ACL (PIE) memory and wait until finished */ - sw_w32(0x1, RTL931X_MEM_ACL_INIT); - do { } while (sw_r32(RTL931X_MEM_ACL_INIT) & 1); - pr_info("%s: init ACL done\n", __func__); - - /* Initialize ALE memory and wait until finished */ - sw_w32(0xFFFFFFFF, RTL931X_MEM_ALE_INIT_0); - do { } while (sw_r32(RTL931X_MEM_ALE_INIT_0)); - sw_w32(0x7F, RTL931X_MEM_ALE_INIT_1); - sw_w32(0x7ff, RTL931X_MEM_ALE_INIT_2); - do { } while (sw_r32(RTL931X_MEM_ALE_INIT_2) & 0x7ff); - pr_info("%s: init ALE done\n", __func__); - - /* Enable ESD auto recovery */ - sw_w32(0x1, RTL931X_MDX_CTRL_RSVD); - - /* Init SPI, is this for thermal control or what? */ - sw_w32_mask(0x7 << 11, 0x2 << 11, RTL931X_SPI_CTRL0); - - return 0; -} - -static int rtl838x_mdio_init(struct rtl838x_eth_priv *priv) -{ - struct device_node *mii_np, *dn; - struct rtl838x_bus_priv *bus_priv; - u32 pn; - int i, ret; - - pr_debug("%s called\n", __func__); - mii_np = of_get_child_by_name(priv->pdev->dev.of_node, "mdio-bus"); - - if (!mii_np) { - dev_err(&priv->pdev->dev, "no %s child node found", "mdio-bus"); - return -ENODEV; - } - - if (!of_device_is_available(mii_np)) { - ret = -ENODEV; - goto err_put_node; - } - - priv->mii_bus = devm_mdiobus_alloc_size(&priv->pdev->dev, sizeof(*bus_priv)); - if (!priv->mii_bus) { - ret = -ENOMEM; - goto err_put_node; - } - - bus_priv = priv->mii_bus->priv; - bus_priv->eth_priv = priv; - for (i=0; i < 64; i++) { - bus_priv->page[i] = 0; - bus_priv->raw[i] = false; - } - bus_priv->extaddr = -1; - - switch(priv->family_id) { - case RTL8380_FAMILY_ID: - priv->mii_bus->name = "rtl838x-eth-mdio"; - priv->mii_bus->read = rtmdio_83xx_read_legacy; - priv->mii_bus->write = rtmdio_83xx_write_legacy; - priv->mii_bus->reset = rtmdio_838x_reset; - bus_priv->read_mmd_phy = rtl838x_read_mmd_phy; - bus_priv->write_mmd_phy = rtl838x_write_mmd_phy; - bus_priv->read_phy = rtl838x_read_phy; - bus_priv->write_phy = rtl838x_write_phy; - bus_priv->rawpage = 0xfff; - break; - case RTL8390_FAMILY_ID: - priv->mii_bus->name = "rtl839x-eth-mdio"; - priv->mii_bus->read = rtmdio_83xx_read_legacy; - priv->mii_bus->write = rtmdio_83xx_write_legacy; - priv->mii_bus->reset = rtmdio_839x_reset; - bus_priv->read_mmd_phy = rtl839x_read_mmd_phy; - bus_priv->write_mmd_phy = rtl839x_write_mmd_phy; - bus_priv->read_phy = rtl839x_read_phy; - bus_priv->write_phy = rtl839x_write_phy; - bus_priv->rawpage = 0x1fff; - break; - case RTL9300_FAMILY_ID: - priv->mii_bus->name = "rtl930x-eth-mdio"; - priv->mii_bus->read = rtmdio_93xx_read_legacy; - priv->mii_bus->write = rtmdio_93xx_write_legacy; - priv->mii_bus->reset = rtmdio_930x_reset; - bus_priv->read_mmd_phy = rtl930x_read_mmd_phy; - bus_priv->write_mmd_phy = rtl930x_write_mmd_phy; - bus_priv->read_phy = rtl930x_read_phy; - bus_priv->write_phy = rtl930x_write_phy; - bus_priv->rawpage = 0xfff; - priv->mii_bus->probe_capabilities = MDIOBUS_C22_C45; - break; - case RTL9310_FAMILY_ID: - priv->mii_bus->name = "rtl931x-eth-mdio"; - priv->mii_bus->read = rtmdio_93xx_read_legacy; - priv->mii_bus->write = rtmdio_93xx_write_legacy; - priv->mii_bus->reset = rtmdio_931x_reset; - bus_priv->read_mmd_phy = rtl931x_read_mmd_phy; - bus_priv->write_mmd_phy = rtl931x_write_mmd_phy; - bus_priv->read_phy = rtl931x_read_phy; - bus_priv->write_phy = rtl931x_write_phy; - bus_priv->rawpage = 0x1fff; - priv->mii_bus->probe_capabilities = MDIOBUS_C22_C45; - break; - } - priv->mii_bus->parent = &priv->pdev->dev; - - for_each_node_by_name(dn, "ethernet-phy") { - u32 smi_addr[2]; - - if (of_property_read_u32(dn, "reg", &pn)) - continue; - - if (of_property_read_u32_array(dn, "rtl9300,smi-address", &smi_addr[0], 2)) { - smi_addr[0] = 0; - smi_addr[1] = pn; - } - - if (of_property_read_u32(dn, "sds", &priv->sds_id[pn])) - priv->sds_id[pn] = -1; - else { - pr_info("set sds port %d to %d\n", pn, priv->sds_id[pn]); - } - - if (pn < MAX_PORTS) { - priv->smi_bus[pn] = smi_addr[0]; - priv->smi_addr[pn] = smi_addr[1]; - } else { - pr_err("%s: illegal port number %d\n", __func__, pn); - } - - if (of_device_is_compatible(dn, "ethernet-phy-ieee802.3-c45")) - priv->smi_bus_isc45[smi_addr[0]] = true; - - if (of_property_read_bool(dn, "phy-is-integrated")) { - priv->phy_is_internal[pn] = true; - } - } - - dn = of_find_compatible_node(NULL, NULL, "realtek,rtl83xx-switch"); - if (!dn) { - dev_err(&priv->pdev->dev, "No RTL switch node in DTS\n"); - return -ENODEV; - } - - for_each_node_by_name(dn, "port") { - if (of_property_read_u32(dn, "reg", &pn)) - continue; - pr_debug("%s Looking at port %d\n", __func__, pn); - if (pn > priv->cpu_port) - continue; - if (of_get_phy_mode(dn, &priv->interfaces[pn])) - priv->interfaces[pn] = PHY_INTERFACE_MODE_NA; - pr_debug("%s phy mode of port %d is %s\n", __func__, pn, phy_modes(priv->interfaces[pn])); - } - - snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%pOFn", mii_np); - ret = of_mdiobus_register(priv->mii_bus, mii_np); - -err_put_node: - of_node_put(mii_np); - - return ret; -} - -static int rtl838x_mdio_remove(struct rtl838x_eth_priv *priv) -{ - pr_debug("%s called\n", __func__); - if (!priv->mii_bus) - return 0; - - mdiobus_unregister(priv->mii_bus); - mdiobus_free(priv->mii_bus); - - return 0; -} - -static netdev_features_t rtl838x_fix_features(struct net_device *dev, - netdev_features_t features) -{ - return features; -} - -static int rtl83xx_set_features(struct net_device *dev, netdev_features_t features) -{ - struct rtl838x_eth_priv *priv = netdev_priv(dev); - - if ((features ^ dev->features) & NETIF_F_RXCSUM) { - if (!(features & NETIF_F_RXCSUM)) - sw_w32_mask(BIT(3), 0, priv->r->mac_port_ctrl(priv->cpu_port)); - else - sw_w32_mask(0, BIT(3), priv->r->mac_port_ctrl(priv->cpu_port)); - } - - return 0; -} - -static int rtl93xx_set_features(struct net_device *dev, netdev_features_t features) -{ - struct rtl838x_eth_priv *priv = netdev_priv(dev); - - if ((features ^ dev->features) & NETIF_F_RXCSUM) { - if (!(features & NETIF_F_RXCSUM)) - sw_w32_mask(BIT(4), 0, priv->r->mac_port_ctrl(priv->cpu_port)); - else - sw_w32_mask(0, BIT(4), priv->r->mac_port_ctrl(priv->cpu_port)); - } - - return 0; -} - -static const struct net_device_ops rtl838x_eth_netdev_ops = { - .ndo_open = rtl838x_eth_open, - .ndo_stop = rtl838x_eth_stop, - .ndo_start_xmit = rtl838x_eth_tx, - .ndo_select_queue = rtl83xx_pick_tx_queue, - .ndo_set_mac_address = rtl838x_set_mac_address, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_rx_mode = rtl838x_eth_set_multicast_list, - .ndo_tx_timeout = rtl838x_eth_tx_timeout, - .ndo_set_features = rtl83xx_set_features, - .ndo_fix_features = rtl838x_fix_features, - .ndo_setup_tc = rtl83xx_setup_tc, -}; - -static const struct net_device_ops rtl839x_eth_netdev_ops = { - .ndo_open = rtl838x_eth_open, - .ndo_stop = rtl838x_eth_stop, - .ndo_start_xmit = rtl838x_eth_tx, - .ndo_select_queue = rtl83xx_pick_tx_queue, - .ndo_set_mac_address = rtl838x_set_mac_address, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_rx_mode = rtl839x_eth_set_multicast_list, - .ndo_tx_timeout = rtl838x_eth_tx_timeout, - .ndo_set_features = rtl83xx_set_features, - .ndo_fix_features = rtl838x_fix_features, - .ndo_setup_tc = rtl83xx_setup_tc, -}; - -static const struct net_device_ops rtl930x_eth_netdev_ops = { - .ndo_open = rtl838x_eth_open, - .ndo_stop = rtl838x_eth_stop, - .ndo_start_xmit = rtl838x_eth_tx, - .ndo_select_queue = rtl93xx_pick_tx_queue, - .ndo_set_mac_address = rtl838x_set_mac_address, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_rx_mode = rtl930x_eth_set_multicast_list, - .ndo_tx_timeout = rtl838x_eth_tx_timeout, - .ndo_set_features = rtl93xx_set_features, - .ndo_fix_features = rtl838x_fix_features, - .ndo_setup_tc = rtl83xx_setup_tc, -}; - -static const struct net_device_ops rtl931x_eth_netdev_ops = { - .ndo_open = rtl838x_eth_open, - .ndo_stop = rtl838x_eth_stop, - .ndo_start_xmit = rtl838x_eth_tx, - .ndo_select_queue = rtl93xx_pick_tx_queue, - .ndo_set_mac_address = rtl838x_set_mac_address, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_rx_mode = rtl931x_eth_set_multicast_list, - .ndo_tx_timeout = rtl838x_eth_tx_timeout, - .ndo_set_features = rtl93xx_set_features, - .ndo_fix_features = rtl838x_fix_features, -}; - -static const struct phylink_mac_ops rtl838x_phylink_ops = { - .validate = rtl838x_validate, - .mac_pcs_get_state = rtl838x_mac_pcs_get_state, - .mac_an_restart = rtl838x_mac_an_restart, - .mac_config = rtl838x_mac_config, - .mac_link_down = rtl838x_mac_link_down, - .mac_link_up = rtl838x_mac_link_up, -}; - -static const struct ethtool_ops rtl838x_ethtool_ops = { - .get_link_ksettings = rtl838x_get_link_ksettings, - .set_link_ksettings = rtl838x_set_link_ksettings, -}; - -static int __init rtl838x_eth_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct device_node *dn = pdev->dev.of_node; - struct rtl838x_eth_priv *priv; - struct resource *res, *mem; - phy_interface_t phy_mode; - struct phylink *phylink; - u8 mac_addr[ETH_ALEN]; - int err = 0, rxrings, rxringlen; - struct ring_b *ring; - - pr_info("Probing RTL838X eth device pdev: %x, dev: %x\n", - (u32)pdev, (u32)(&(pdev->dev))); - - if (!dn) { - dev_err(&pdev->dev, "No DT found\n"); - return -EINVAL; - } - - rxrings = (soc_info.family == RTL8380_FAMILY_ID - || soc_info.family == RTL8390_FAMILY_ID) ? 8 : 32; - rxrings = rxrings > MAX_RXRINGS ? MAX_RXRINGS : rxrings; - rxringlen = MAX_ENTRIES / rxrings; - rxringlen = rxringlen > MAX_RXLEN ? MAX_RXLEN : rxringlen; - - dev = alloc_etherdev_mqs(sizeof(struct rtl838x_eth_priv), TXRINGS, rxrings); - if (!dev) { - err = -ENOMEM; - goto err_free; - } - SET_NETDEV_DEV(dev, &pdev->dev); - priv = netdev_priv(dev); - - /* obtain buffer memory space */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res) { - mem = devm_request_mem_region(&pdev->dev, res->start, - resource_size(res), res->name); - if (!mem) { - dev_err(&pdev->dev, "cannot request memory space\n"); - err = -ENXIO; - goto err_free; - } - - dev->mem_start = mem->start; - dev->mem_end = mem->end; - } else { - dev_err(&pdev->dev, "cannot request IO resource\n"); - err = -ENXIO; - goto err_free; - } - - /* Allocate buffer memory */ - priv->membase = dmam_alloc_coherent(&pdev->dev, rxrings * rxringlen * RING_BUFFER + - sizeof(struct ring_b) + sizeof(struct notify_b), - (void *)&dev->mem_start, GFP_KERNEL); - if (!priv->membase) { - dev_err(&pdev->dev, "cannot allocate DMA buffer\n"); - err = -ENOMEM; - goto err_free; - } - - /* Allocate ring-buffer space at the end of the allocated memory */ - ring = priv->membase; - ring->rx_space = priv->membase + sizeof(struct ring_b) + sizeof(struct notify_b); - - spin_lock_init(&priv->lock); - - dev->ethtool_ops = &rtl838x_ethtool_ops; - dev->min_mtu = ETH_ZLEN; - dev->max_mtu = DEFAULT_MTU; - dev->features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM; - dev->hw_features = NETIF_F_RXCSUM; - - priv->id = soc_info.id; - priv->family_id = soc_info.family; - if (priv->id) { - pr_info("Found SoC ID: %4x: %s, family %x\n", - priv->id, soc_info.name, priv->family_id); - } else { - pr_err("Unknown chip id (%04x)\n", priv->id); - return -ENODEV; - } - - switch (priv->family_id) { - case RTL8380_FAMILY_ID: - priv->cpu_port = RTL838X_CPU_PORT; - priv->r = &rtl838x_reg; - dev->netdev_ops = &rtl838x_eth_netdev_ops; - break; - case RTL8390_FAMILY_ID: - priv->cpu_port = RTL839X_CPU_PORT; - priv->r = &rtl839x_reg; - dev->netdev_ops = &rtl839x_eth_netdev_ops; - break; - case RTL9300_FAMILY_ID: - priv->cpu_port = RTL930X_CPU_PORT; - priv->r = &rtl930x_reg; - dev->netdev_ops = &rtl930x_eth_netdev_ops; - break; - case RTL9310_FAMILY_ID: - priv->cpu_port = RTL931X_CPU_PORT; - priv->r = &rtl931x_reg; - dev->netdev_ops = &rtl931x_eth_netdev_ops; - rtl931x_chip_init(priv); - break; - default: - pr_err("Unknown SoC family\n"); - return -ENODEV; - } - priv->rxringlen = rxringlen; - priv->rxrings = rxrings; - - /* Obtain device IRQ number */ - dev->irq = platform_get_irq(pdev, 0); - if (dev->irq < 0) { - dev_err(&pdev->dev, "cannot obtain network-device IRQ\n"); - goto err_free; - } - - err = devm_request_irq(&pdev->dev, dev->irq, priv->r->net_irq, - IRQF_SHARED, dev->name, dev); - if (err) { - dev_err(&pdev->dev, "%s: could not acquire interrupt: %d\n", - __func__, err); - goto err_free; - } - - rtl8380_init_mac(priv); - - /* Try to get mac address in the following order: - * 1) from device tree data - * 2) from internal registers set by bootloader - */ - of_get_mac_address(pdev->dev.of_node, mac_addr); - if (is_valid_ether_addr(mac_addr)) { - rtl838x_set_mac_hw(dev, mac_addr); - } else { - mac_addr[0] = (sw_r32(priv->r->mac) >> 8) & 0xff; - mac_addr[1] = sw_r32(priv->r->mac) & 0xff; - mac_addr[2] = (sw_r32(priv->r->mac + 4) >> 24) & 0xff; - mac_addr[3] = (sw_r32(priv->r->mac + 4) >> 16) & 0xff; - mac_addr[4] = (sw_r32(priv->r->mac + 4) >> 8) & 0xff; - mac_addr[5] = sw_r32(priv->r->mac + 4) & 0xff; - } - dev_addr_set(dev, mac_addr); - /* if the address is invalid, use a random value */ - if (!is_valid_ether_addr(dev->dev_addr)) { - struct sockaddr sa = { AF_UNSPEC }; - - netdev_warn(dev, "Invalid MAC address, using random\n"); - eth_hw_addr_random(dev); - memcpy(sa.sa_data, dev->dev_addr, ETH_ALEN); - if (rtl838x_set_mac_address(dev, &sa)) - netdev_warn(dev, "Failed to set MAC address.\n"); - } - pr_info("Using MAC %08x%08x\n", sw_r32(priv->r->mac), - sw_r32(priv->r->mac + 4)); - strcpy(dev->name, "eth%d"); - priv->pdev = pdev; - priv->netdev = dev; - - err = rtl838x_mdio_init(priv); - if (err) - goto err_free; - - err = register_netdev(dev); - if (err) - goto err_free; - - for (int i = 0; i < priv->rxrings; i++) { - priv->rx_qs[i].id = i; - priv->rx_qs[i].priv = priv; - netif_napi_add(dev, &priv->rx_qs[i].napi, rtl838x_poll_rx, 64); - } - - platform_set_drvdata(pdev, dev); - - phy_mode = PHY_INTERFACE_MODE_NA; - err = of_get_phy_mode(dn, &phy_mode); - if (err < 0) { - dev_err(&pdev->dev, "incorrect phy-mode\n"); - err = -EINVAL; - goto err_free; - } - - priv->phylink_config.dev = &dev->dev; - priv->phylink_config.type = PHYLINK_NETDEV; - - phylink = phylink_create(&priv->phylink_config, pdev->dev.fwnode, - phy_mode, &rtl838x_phylink_ops); - - if (IS_ERR(phylink)) { - err = PTR_ERR(phylink); - goto err_free; - } - priv->phylink = phylink; - - return 0; - -err_free: - pr_err("Error setting up netdev, freeing it again.\n"); - free_netdev(dev); - - return err; -} - -static int rtl838x_eth_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct rtl838x_eth_priv *priv = netdev_priv(dev); - - if (dev) { - pr_info("Removing platform driver for rtl838x-eth\n"); - rtl838x_mdio_remove(priv); - rtl838x_hw_stop(priv); - - netif_tx_stop_all_queues(dev); - - for (int i = 0; i < priv->rxrings; i++) - netif_napi_del(&priv->rx_qs[i].napi); - - unregister_netdev(dev); - free_netdev(dev); - } - - return 0; -} - -static const struct of_device_id rtl838x_eth_of_ids[] = { - { .compatible = "realtek,rtl838x-eth"}, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, rtl838x_eth_of_ids); - -static struct platform_driver rtl838x_eth_driver = { - .probe = rtl838x_eth_probe, - .remove = rtl838x_eth_remove, - .driver = { - .name = "rtl838x-eth", - .pm = NULL, - .of_match_table = rtl838x_eth_of_ids, - }, -}; - -module_platform_driver(rtl838x_eth_driver); - -MODULE_AUTHOR("B. Koblitz"); -MODULE_DESCRIPTION("RTL838X SoC Ethernet Driver"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.h b/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.h deleted file mode 100644 index d6d88fc2ed..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/ethernet/rtl838x_eth.h +++ /dev/null @@ -1,470 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef _RTL838X_ETH_H -#define _RTL838X_ETH_H - -/* Register definition */ - -/* Per port MAC control */ -#define RTL838X_MAC_PORT_CTRL (0xd560) -#define RTL839X_MAC_PORT_CTRL (0x8004) -#define RTL930X_MAC_L2_PORT_CTRL (0x3268) -#define RTL930X_MAC_PORT_CTRL (0x3260) -#define RTL931X_MAC_L2_PORT_CTRL (0x6000) -#define RTL931X_MAC_PORT_CTRL (0x6004) - -/* DMA interrupt control and status registers */ -#define RTL838X_DMA_IF_CTRL (0x9f58) -#define RTL838X_DMA_IF_INTR_STS (0x9f54) -#define RTL838X_DMA_IF_INTR_MSK (0x9f50) - -#define RTL839X_DMA_IF_CTRL (0x786c) -#define RTL839X_DMA_IF_INTR_STS (0x7868) -#define RTL839X_DMA_IF_INTR_MSK (0x7864) - -#define RTL930X_DMA_IF_CTRL (0xe028) -#define RTL930X_DMA_IF_INTR_RX_RUNOUT_STS (0xe01C) -#define RTL930X_DMA_IF_INTR_RX_DONE_STS (0xe020) -#define RTL930X_DMA_IF_INTR_TX_DONE_STS (0xe024) -#define RTL930X_DMA_IF_INTR_RX_RUNOUT_MSK (0xe010) -#define RTL930X_DMA_IF_INTR_RX_DONE_MSK (0xe014) -#define RTL930X_DMA_IF_INTR_TX_DONE_MSK (0xe018) -#define RTL930X_L2_NTFY_IF_INTR_MSK (0xe04C) -#define RTL930X_L2_NTFY_IF_INTR_STS (0xe050) - -/* TODO: RTL931X_DMA_IF_CTRL has different bits meanings */ -#define RTL931X_DMA_IF_CTRL (0x0928) -#define RTL931X_DMA_IF_INTR_RX_RUNOUT_STS (0x091c) -#define RTL931X_DMA_IF_INTR_RX_DONE_STS (0x0920) -#define RTL931X_DMA_IF_INTR_TX_DONE_STS (0x0924) -#define RTL931X_DMA_IF_INTR_RX_RUNOUT_MSK (0x0910) -#define RTL931X_DMA_IF_INTR_RX_DONE_MSK (0x0914) -#define RTL931X_DMA_IF_INTR_TX_DONE_MSK (0x0918) -#define RTL931X_L2_NTFY_IF_INTR_MSK (0x09E4) -#define RTL931X_L2_NTFY_IF_INTR_STS (0x09E8) - -#define RTL838X_MAC_FORCE_MODE_CTRL (0xa104) -#define RTL839X_MAC_FORCE_MODE_CTRL (0x02bc) -#define RTL930X_MAC_FORCE_MODE_CTRL (0xCA1C) -#define RTL931X_MAC_FORCE_MODE_CTRL (0x0ddc) - -/* MAC address settings */ -#define RTL838X_MAC (0xa9ec) -#define RTL839X_MAC (0x02b4) -#define RTL838X_MAC_ALE (0x6b04) -#define RTL838X_MAC2 (0xa320) -#define RTL930X_MAC_L2_ADDR_CTRL (0xC714) -#define RTL931X_MAC_L2_ADDR_CTRL (0x135c) - -/* Ringbuffer setup */ -#define RTL838X_DMA_RX_BASE (0x9f00) -#define RTL839X_DMA_RX_BASE (0x780c) -#define RTL930X_DMA_RX_BASE (0xdf00) -#define RTL931X_DMA_RX_BASE (0x0800) - -#define RTL838X_DMA_TX_BASE (0x9f40) -#define RTL839X_DMA_TX_BASE (0x784c) -#define RTL930X_DMA_TX_BASE (0xe000) -#define RTL931X_DMA_TX_BASE (0x0900) - -#define RTL838X_DMA_IF_RX_RING_SIZE (0xB7E4) -#define RTL839X_DMA_IF_RX_RING_SIZE (0x6038) -#define RTL930X_DMA_IF_RX_RING_SIZE (0x7C60) -#define RTL931X_DMA_IF_RX_RING_SIZE (0x2080) - -#define RTL838X_DMA_IF_RX_RING_CNTR (0xB7E8) -#define RTL839X_DMA_IF_RX_RING_CNTR (0x603c) -#define RTL930X_DMA_IF_RX_RING_CNTR (0x7C8C) -#define RTL931X_DMA_IF_RX_RING_CNTR (0x20AC) - -#define RTL838X_DMA_IF_RX_CUR (0x9F20) -#define RTL839X_DMA_IF_RX_CUR (0x782c) -#define RTL930X_DMA_IF_RX_CUR (0xdf80) -#define RTL931X_DMA_IF_RX_CUR (0x0880) - -#define RTL838X_DMA_IF_TX_CUR_DESC_ADDR_CTRL (0x9F48) -#define RTL930X_DMA_IF_TX_CUR_DESC_ADDR_CTRL (0xE008) - -#define RTL838X_DMY_REG31 (0x3b28) -#define RTL838X_SDS_MODE_SEL (0x0028) -#define RTL838X_SDS_CFG_REG (0x0034) -#define RTL838X_INT_MODE_CTRL (0x005c) -#define RTL838X_CHIP_INFO (0x00d8) -#define RTL838X_SDS4_REG28 (0xef80) -#define RTL838X_SDS4_DUMMY0 (0xef8c) -#define RTL838X_SDS5_EXT_REG6 (0xf18c) - -/* L2 features */ -#define RTL839X_TBL_ACCESS_L2_CTRL (0x1180) -#define RTL839X_TBL_ACCESS_L2_DATA(idx) (0x1184 + ((idx) << 2)) -#define RTL838X_TBL_ACCESS_CTRL_0 (0x6914) -#define RTL838X_TBL_ACCESS_DATA_0(idx) (0x6918 + ((idx) << 2)) - -/* MAC-side link state handling */ -#define RTL838X_MAC_LINK_STS (0xa188) -#define RTL839X_MAC_LINK_STS (0x0390) -#define RTL930X_MAC_LINK_STS (0xCB10) -#define RTL931X_MAC_LINK_STS (0x0ec0) - -#define RTL838X_MAC_LINK_SPD_STS (0xa190) -#define RTL839X_MAC_LINK_SPD_STS (0x03a0) -#define RTL930X_MAC_LINK_SPD_STS (0xCB18) -#define RTL931X_MAC_LINK_SPD_STS (0x0ed0) - -#define RTL838X_MAC_LINK_DUP_STS (0xa19c) -#define RTL839X_MAC_LINK_DUP_STS (0x03b0) -#define RTL930X_MAC_LINK_DUP_STS (0xCB28) -#define RTL931X_MAC_LINK_DUP_STS (0x0ef0) - -/* TODO: RTL8390_MAC_LINK_MEDIA_STS_ADDR??? */ - -#define RTL838X_MAC_TX_PAUSE_STS (0xa1a0) -#define RTL839X_MAC_TX_PAUSE_STS (0x03b8) -#define RTL930X_MAC_TX_PAUSE_STS (0xCB2C) -#define RTL931X_MAC_TX_PAUSE_STS (0x0ef8) - -#define RTL838X_MAC_RX_PAUSE_STS (0xa1a4) -#define RTL839X_MAC_RX_PAUSE_STS (0xCB30) -#define RTL930X_MAC_RX_PAUSE_STS (0xC2F8) -#define RTL931X_MAC_RX_PAUSE_STS (0x0f00) - -#define RTL838X_EEE_TX_TIMER_GIGA_CTRL (0xaa04) -#define RTL838X_EEE_TX_TIMER_GELITE_CTRL (0xaa08) - -#define RTL930X_L2_UNKN_UC_FLD_PMSK (0x9064) -#define RTL931X_L2_UNKN_UC_FLD_PMSK (0xC8F4) - -#define RTL839X_MAC_GLB_CTRL (0x02a8) -#define RTL839X_SCHED_LB_TICK_TKN_CTRL (0x60f8) - -#define RTL838X_L2_TBL_FLUSH_CTRL (0x3370) -#define RTL839X_L2_TBL_FLUSH_CTRL (0x3ba0) -#define RTL930X_L2_TBL_FLUSH_CTRL (0x9404) -#define RTL931X_L2_TBL_FLUSH_CTRL (0xCD9C) - -#define RTL930X_L2_PORT_SABLK_CTRL (0x905c) -#define RTL930X_L2_PORT_DABLK_CTRL (0x9060) - -/* MAC link state bits */ -#define FORCE_EN (1 << 0) -#define FORCE_LINK_EN (1 << 1) -#define NWAY_EN (1 << 2) -#define DUPLX_MODE (1 << 3) -#define TX_PAUSE_EN (1 << 6) -#define RX_PAUSE_EN (1 << 7) - -/* L2 Notification DMA interface */ -#define RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL (0x785C) -#define RTL839X_L2_NOTIFICATION_CTRL (0x7808) -#define RTL931X_L2_NTFY_RING_BASE_ADDR (0x09DC) -#define RTL931X_L2_NTFY_RING_CUR_ADDR (0x09E0) -#define RTL839X_L2_NOTIFICATION_CTRL (0x7808) -#define RTL931X_L2_NTFY_CTRL (0xCDC8) -#define RTL838X_L2_CTRL_0 (0x3200) -#define RTL839X_L2_CTRL_0 (0x3800) -#define RTL930X_L2_CTRL (0x8FD8) -#define RTL931X_L2_CTRL (0xC800) - -/* TRAPPING to CPU-PORT */ -#define RTL838X_SPCL_TRAP_IGMP_CTRL (0x6984) -#define RTL838X_RMA_CTRL_0 (0x4300) -#define RTL838X_RMA_CTRL_1 (0x4304) -#define RTL839X_RMA_CTRL_0 (0x1200) - -#define RTL839X_SPCL_TRAP_IGMP_CTRL (0x1058) -#define RTL839X_RMA_CTRL_1 (0x1204) -#define RTL839X_RMA_CTRL_2 (0x1208) -#define RTL839X_RMA_CTRL_3 (0x120C) - -#define RTL930X_VLAN_APP_PKT_CTRL (0xA23C) -#define RTL930X_RMA_CTRL_0 (0x9E60) -#define RTL930X_RMA_CTRL_1 (0x9E64) -#define RTL930X_RMA_CTRL_2 (0x9E68) - -#define RTL931X_VLAN_APP_PKT_CTRL (0x96b0) -#define RTL931X_RMA_CTRL_0 (0x8800) -#define RTL931X_RMA_CTRL_1 (0x8804) -#define RTL931X_RMA_CTRL_2 (0x8808) - -/* Advanced SMI control for clause 45 PHYs */ -#define RTL930X_SMI_MAC_TYPE_CTRL (0xCA04) -#define RTL930X_SMI_PORT24_27_ADDR_CTRL (0xCB90) -#define RTL930X_SMI_PORT0_15_POLLING_SEL (0xCA08) -#define RTL930X_SMI_PORT16_27_POLLING_SEL (0xCA0C) - -#define RTL930X_SMI_10GPHY_POLLING_REG0_CFG (0xCBB4) -#define RTL930X_SMI_10GPHY_POLLING_REG9_CFG (0xCBB8) -#define RTL930X_SMI_10GPHY_POLLING_REG10_CFG (0xCBBC) -#define RTL930X_SMI_PRVTE_POLLING_CTRL (0xCA10) - -/* Registers of the internal Serdes of the 8390 */ -#define RTL839X_SDS12_13_XSG0 (0xB800) - -/* Chip configuration registers of the RTL9310 */ -#define RTL931X_MEM_ENCAP_INIT (0x4854) -#define RTL931X_MEM_MIB_INIT (0x7E18) -#define RTL931X_MEM_ACL_INIT (0x40BC) -#define RTL931X_MEM_ALE_INIT_0 (0x83F0) -#define RTL931X_MEM_ALE_INIT_1 (0x83F4) -#define RTL931X_MEM_ALE_INIT_2 (0x82E4) -#define RTL931X_MDX_CTRL_RSVD (0x0fcc) -#define RTL931X_PS_SOC_CTRL (0x13f8) -#define RTL931X_SMI_10GPHY_POLLING_SEL2 (0xCF8) -#define RTL931X_SMI_10GPHY_POLLING_SEL3 (0xCFC) -#define RTL931X_SMI_10GPHY_POLLING_SEL4 (0xD00) - -/* Registers of the internal Serdes of the 8380 */ -#define RTL838X_SDS4_FIB_REG0 (0xF800) - -/* Default MTU with jumbo frames support */ -#define DEFAULT_MTU 9000 - -inline int rtl838x_mac_port_ctrl(int p) -{ - return RTL838X_MAC_PORT_CTRL + (p << 7); -} - -inline int rtl839x_mac_port_ctrl(int p) -{ - return RTL839X_MAC_PORT_CTRL + (p << 7); -} - -/* On the RTL931XX, the functionality of the MAC port control register is split up - * into RTL931X_MAC_L2_PORT_CTRL and RTL931X_MAC_PORT_CTRL the functionality used - * by the Ethernet driver is in the same bits now in RTL931X_MAC_L2_PORT_CTRL - */ - -inline int rtl930x_mac_port_ctrl(int p) -{ - return RTL930X_MAC_L2_PORT_CTRL + (p << 6); -} - -inline int rtl931x_mac_port_ctrl(int p) -{ - return RTL931X_MAC_L2_PORT_CTRL + (p << 7); -} - -inline int rtl838x_dma_if_rx_ring_size(int i) -{ - return RTL838X_DMA_IF_RX_RING_SIZE + ((i >> 3) << 2); -} - -inline int rtl839x_dma_if_rx_ring_size(int i) -{ - return RTL839X_DMA_IF_RX_RING_SIZE + ((i >> 3) << 2); -} - -inline int rtl930x_dma_if_rx_ring_size(int i) -{ - return RTL930X_DMA_IF_RX_RING_SIZE + ((i / 3) << 2); -} - -inline int rtl931x_dma_if_rx_ring_size(int i) -{ - return RTL931X_DMA_IF_RX_RING_SIZE + ((i / 3) << 2); -} - -inline int rtl838x_dma_if_rx_ring_cntr(int i) -{ - return RTL838X_DMA_IF_RX_RING_CNTR + ((i >> 3) << 2); -} - -inline int rtl839x_dma_if_rx_ring_cntr(int i) -{ - return RTL839X_DMA_IF_RX_RING_CNTR + ((i >> 3) << 2); -} - -inline int rtl930x_dma_if_rx_ring_cntr(int i) -{ - return RTL930X_DMA_IF_RX_RING_CNTR + ((i / 3) << 2); -} - -inline int rtl931x_dma_if_rx_ring_cntr(int i) -{ - return RTL931X_DMA_IF_RX_RING_CNTR + ((i / 3) << 2); -} - -inline u32 rtl838x_get_mac_link_sts(int port) -{ - return (sw_r32(RTL838X_MAC_LINK_STS) & BIT(port)); -} - -inline u32 rtl839x_get_mac_link_sts(int p) -{ - return (sw_r32(RTL839X_MAC_LINK_STS + ((p >> 5) << 2)) & BIT(p % 32)); -} - -inline u32 rtl930x_get_mac_link_sts(int port) -{ - u32 link = sw_r32(RTL930X_MAC_LINK_STS); - - link = sw_r32(RTL930X_MAC_LINK_STS); - pr_info("%s link state is %08x\n", __func__, link); - return link & BIT(port); -} - -inline u32 rtl931x_get_mac_link_sts(int p) -{ - return (sw_r32(RTL931X_MAC_LINK_STS + ((p >> 5) << 2)) & BIT(p % 32)); -} - -inline u32 rtl838x_get_mac_link_dup_sts(int port) -{ - return (sw_r32(RTL838X_MAC_LINK_DUP_STS) & BIT(port)); -} - -inline u32 rtl839x_get_mac_link_dup_sts(int p) -{ - return (sw_r32(RTL839X_MAC_LINK_DUP_STS + ((p >> 5) << 2)) & BIT(p % 32)); -} - -inline u32 rtl930x_get_mac_link_dup_sts(int port) -{ - return (sw_r32(RTL930X_MAC_LINK_DUP_STS) & BIT(port)); -} - -inline u32 rtl931x_get_mac_link_dup_sts(int p) -{ - return (sw_r32(RTL931X_MAC_LINK_DUP_STS + ((p >> 5) << 2)) & BIT(p % 32)); -} - -inline u32 rtl838x_get_mac_link_spd_sts(int port) -{ - int r = RTL838X_MAC_LINK_SPD_STS + ((port >> 4) << 2); - u32 speed = sw_r32(r); - - speed >>= (port % 16) << 1; - return (speed & 0x3); -} - -inline u32 rtl839x_get_mac_link_spd_sts(int port) -{ - int r = RTL839X_MAC_LINK_SPD_STS + ((port >> 4) << 2); - u32 speed = sw_r32(r); - - speed >>= (port % 16) << 1; - return (speed & 0x3); -} - - -inline u32 rtl930x_get_mac_link_spd_sts(int port) -{ - int r = RTL930X_MAC_LINK_SPD_STS + ((port >> 3) << 2); - u32 speed = sw_r32(r); - - speed >>= (port % 8) << 2; - return (speed & 0xf); -} - -inline u32 rtl931x_get_mac_link_spd_sts(int port) -{ - int r = RTL931X_MAC_LINK_SPD_STS + ((port >> 3) << 2); - u32 speed = sw_r32(r); - - speed >>= (port % 8) << 2; - return (speed & 0xf); -} - -inline u32 rtl838x_get_mac_rx_pause_sts(int port) -{ - return (sw_r32(RTL838X_MAC_RX_PAUSE_STS) & (1 << port)); -} - -inline u32 rtl839x_get_mac_rx_pause_sts(int p) -{ - return (sw_r32(RTL839X_MAC_RX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32)); -} - -inline u32 rtl930x_get_mac_rx_pause_sts(int port) -{ - return (sw_r32(RTL930X_MAC_RX_PAUSE_STS) & (1 << port)); -} - -inline u32 rtl931x_get_mac_rx_pause_sts(int p) -{ - return (sw_r32(RTL931X_MAC_RX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32)); -} - -inline u32 rtl838x_get_mac_tx_pause_sts(int port) -{ - return (sw_r32(RTL838X_MAC_TX_PAUSE_STS) & (1 << port)); -} - -inline u32 rtl839x_get_mac_tx_pause_sts(int p) -{ - return (sw_r32(RTL839X_MAC_TX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32)); -} - -inline u32 rtl930x_get_mac_tx_pause_sts(int port) -{ - return (sw_r32(RTL930X_MAC_TX_PAUSE_STS) & (1 << port)); -} - -inline u32 rtl931x_get_mac_tx_pause_sts(int p) -{ - return (sw_r32(RTL931X_MAC_TX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32)); -} - -struct p_hdr; -struct dsa_tag; - -struct rtl838x_bus_priv { - struct rtl838x_eth_priv *eth_priv; - int extaddr; - int rawpage; - int page[64]; - bool raw[64]; - int (*read_mmd_phy)(u32 port, u32 addr, u32 reg, u32 *val); - int (*write_mmd_phy)(u32 port, u32 addr, u32 reg, u32 val); - int (*read_phy)(u32 port, u32 page, u32 reg, u32 *val); - int (*write_phy)(u32 port, u32 page, u32 reg, u32 val); -}; - -struct rtl838x_eth_reg { - irqreturn_t (*net_irq)(int irq, void *dev_id); - int (*mac_port_ctrl)(int port); - int dma_if_intr_sts; - int dma_if_intr_msk; - int dma_if_intr_rx_runout_sts; - int dma_if_intr_rx_done_sts; - int dma_if_intr_tx_done_sts; - int dma_if_intr_rx_runout_msk; - int dma_if_intr_rx_done_msk; - int dma_if_intr_tx_done_msk; - int l2_ntfy_if_intr_sts; - int l2_ntfy_if_intr_msk; - int dma_if_ctrl; - int mac_force_mode_ctrl; - int dma_rx_base; - int dma_tx_base; - int (*dma_if_rx_ring_size)(int ring); - int (*dma_if_rx_ring_cntr)(int ring); - int dma_if_rx_cur; - int rst_glb_ctrl; - u32 (*get_mac_link_sts)(int port); - u32 (*get_mac_link_dup_sts)(int port); - u32 (*get_mac_link_spd_sts)(int port); - u32 (*get_mac_rx_pause_sts)(int port); - u32 (*get_mac_tx_pause_sts)(int port); - int mac; - int l2_tbl_flush_ctrl; - void (*update_cntr)(int r, int work_done); - void (*create_tx_header)(struct p_hdr *h, unsigned int dest_port, int prio); - bool (*decode_tag)(struct p_hdr *h, struct dsa_tag *tag); -}; - -int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val); -int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -int rtl838x_write_mmd_phy(u32 port, u32 addr, u32 reg, u32 val); -int rtl838x_read_mmd_phy(u32 port, u32 addr, u32 reg, u32 *val); -int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val); -int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -int rtl839x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val); -int rtl839x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val); -int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val); -int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val); -int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -int rtl83xx_setup_tc(struct net_device *dev, enum tc_setup_type type, void *type_data); - -#endif /* _RTL838X_ETH_H */ diff --git a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c deleted file mode 100644 index df5e2e4440..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.c +++ /dev/null @@ -1,4001 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* Realtek RTL838X Ethernet MDIO interface driver - * - * Copyright (C) 2020 B. Koblitz - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include "rtl83xx-phy.h" - -extern struct rtl83xx_soc_info soc_info; -extern struct mutex smi_lock; -extern int phy_package_port_write_paged(struct phy_device *phydev, int port, int page, u32 regnum, u16 val); -extern int phy_package_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val); -extern int phy_port_write_paged(struct phy_device *phydev, int port, int page, u32 regnum, u16 val); -extern int phy_package_port_read_paged(struct phy_device *phydev, int port, int page, u32 regnum); -extern int phy_package_read_paged(struct phy_device *phydev, int page, u32 regnum); -extern int phy_port_read_paged(struct phy_device *phydev, int port, int page, u32 regnum); - -#define PHY_PAGE_2 2 -#define PHY_PAGE_4 4 - -/* all Clause-22 RealTek MDIO PHYs use register 0x1f for page select */ -#define RTL8XXX_PAGE_SELECT 0x1f - -#define RTL8XXX_PAGE_MAIN 0x0000 -#define RTL821X_PAGE_PORT 0x0266 -#define RTL821X_PAGE_POWER 0x0a40 -#define RTL821X_PAGE_GPHY 0x0a42 -#define RTL821X_PAGE_MAC 0x0a43 -#define RTL821X_PAGE_STATE 0x0b80 -#define RTL821X_PAGE_PATCH 0x0b82 - -/* Using the special page 0xfff with the MDIO controller found in - * RealTek SoCs allows to access the PHY in RAW mode, ie. bypassing - * the cache and paging engine of the MDIO controller. - */ -#define RTL83XX_PAGE_RAW 0x0fff - -/* internal RTL821X PHY uses register 0x1d to select media page */ -#define RTL821XINT_MEDIA_PAGE_SELECT 0x1d -/* external RTL821X PHY uses register 0x1e to select media page */ -#define RTL821XEXT_MEDIA_PAGE_SELECT 0x1e - -#define RTL821X_CHIP_ID 0x6276 - -#define RTL821X_MEDIA_PAGE_AUTO 0 -#define RTL821X_MEDIA_PAGE_COPPER 1 -#define RTL821X_MEDIA_PAGE_FIBRE 3 -#define RTL821X_MEDIA_PAGE_INTERNAL 8 - -#define RTL9300_PHY_ID_MASK 0xf0ffffff - -/* RTL930X SerDes supports the following modes: - * 0x02: SGMII 0x04: 1000BX_FIBER 0x05: FIBER100 - * 0x06: QSGMII 0x09: RSGMII 0x0d: USXGMII - * 0x10: XSGMII 0x12: HISGMII 0x16: 2500Base_X - * 0x17: RXAUI_LITE 0x19: RXAUI_PLUS 0x1a: 10G Base-R - * 0x1b: 10GR1000BX_AUTO 0x1f: OFF - */ -#define RTL930X_SDS_MODE_SGMII 0x02 -#define RTL930X_SDS_MODE_1000BASEX 0x04 -#define RTL930X_SDS_MODE_USXGMII 0x0d -#define RTL930X_SDS_MODE_XGMII 0x10 -#define RTL930X_SDS_MODE_HSGMII 0x12 -#define RTL930X_SDS_MODE_2500BASEX 0x16 -#define RTL930X_SDS_MODE_10GBASER 0x1a -#define RTL930X_SDS_OFF 0x1f -#define RTL930X_SDS_MASK 0x1f - -/* This lock protects the state of the SoC automatically polling the PHYs over the SMI - * bus to detect e.g. link and media changes. For operations on the PHYs such as - * patching or other configuration changes such as EEE, polling needs to be disabled - * since otherwise these operations may fails or lead to unpredictable results. - */ -DEFINE_MUTEX(poll_lock); - -static const struct firmware rtl838x_8380_fw; -static const struct firmware rtl838x_8214fc_fw; -static const struct firmware rtl838x_8218b_fw; - -static u64 disable_polling(int port) -{ - u64 saved_state; - - mutex_lock(&poll_lock); - - switch (soc_info.family) { - case RTL8380_FAMILY_ID: - saved_state = sw_r32(RTL838X_SMI_POLL_CTRL); - sw_w32_mask(BIT(port), 0, RTL838X_SMI_POLL_CTRL); - break; - case RTL8390_FAMILY_ID: - saved_state = sw_r32(RTL839X_SMI_PORT_POLLING_CTRL + 4); - saved_state <<= 32; - saved_state |= sw_r32(RTL839X_SMI_PORT_POLLING_CTRL); - sw_w32_mask(BIT(port % 32), 0, - RTL839X_SMI_PORT_POLLING_CTRL + ((port >> 5) << 2)); - break; - case RTL9300_FAMILY_ID: - saved_state = sw_r32(RTL930X_SMI_POLL_CTRL); - sw_w32_mask(BIT(port), 0, RTL930X_SMI_POLL_CTRL); - break; - case RTL9310_FAMILY_ID: - pr_warn("%s not implemented for RTL931X\n", __func__); - break; - } - - mutex_unlock(&poll_lock); - - return saved_state; -} - -static int resume_polling(u64 saved_state) -{ - mutex_lock(&poll_lock); - - switch (soc_info.family) { - case RTL8380_FAMILY_ID: - sw_w32(saved_state, RTL838X_SMI_POLL_CTRL); - break; - case RTL8390_FAMILY_ID: - sw_w32(saved_state >> 32, RTL839X_SMI_PORT_POLLING_CTRL + 4); - sw_w32(saved_state, RTL839X_SMI_PORT_POLLING_CTRL); - break; - case RTL9300_FAMILY_ID: - sw_w32(saved_state, RTL930X_SMI_POLL_CTRL); - break; - case RTL9310_FAMILY_ID: - pr_warn("%s not implemented for RTL931X\n", __func__); - break; - } - - mutex_unlock(&poll_lock); - - return 0; -} - -static void rtl8380_int_phy_on_off(struct phy_device *phydev, bool on) -{ - phy_modify(phydev, 0, BMCR_PDOWN, on ? 0 : BMCR_PDOWN); -} - -static void rtl8380_rtl8214fc_on_off(struct phy_device *phydev, bool on) -{ - /* fiber ports */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE); - phy_modify(phydev, 0x10, BMCR_PDOWN, on ? 0 : BMCR_PDOWN); - - /* copper ports */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BMCR_PDOWN, on ? 0 : BMCR_PDOWN); -} - -static void rtl8380_phy_reset(struct phy_device *phydev) -{ - phy_modify(phydev, 0, BMCR_RESET, BMCR_RESET); -} - -/* The access registers for SDS_MODE_SEL and the LSB for each SDS within */ -u16 rtl9300_sds_regs[] = { 0x0194, 0x0194, 0x0194, 0x0194, 0x02a0, 0x02a0, 0x02a0, 0x02a0, - 0x02A4, 0x02A4, 0x0198, 0x0198 }; -u8 rtl9300_sds_lsb[] = { 0, 6, 12, 18, 0, 6, 12, 18, 0, 6, 0, 6}; - -/* Reset the SerDes by powering it off and set a new operation mode - * of the SerDes. - */ -void rtl9300_sds_rst(int sds_num, u32 mode) -{ - pr_info("%s %d\n", __func__, mode); - if (sds_num < 0 || sds_num > 11) { - pr_err("Wrong SerDes number: %d\n", sds_num); - return; - } - - sw_w32_mask(RTL930X_SDS_MASK << rtl9300_sds_lsb[sds_num], - RTL930X_SDS_OFF << rtl9300_sds_lsb[sds_num], - rtl9300_sds_regs[sds_num]); - mdelay(10); - - sw_w32_mask(RTL930X_SDS_MASK << rtl9300_sds_lsb[sds_num], mode << rtl9300_sds_lsb[sds_num], - rtl9300_sds_regs[sds_num]); - mdelay(10); - - pr_debug("%s: 194:%08x 198:%08x 2a0:%08x 2a4:%08x\n", __func__, - sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4)); -} - -void rtl9300_sds_set(int sds_num, u32 mode) -{ - pr_info("%s %d\n", __func__, mode); - if (sds_num < 0 || sds_num > 11) { - pr_err("Wrong SerDes number: %d\n", sds_num); - return; - } - - sw_w32_mask(RTL930X_SDS_MASK << rtl9300_sds_lsb[sds_num], mode << rtl9300_sds_lsb[sds_num], - rtl9300_sds_regs[sds_num]); - mdelay(10); - - pr_debug("%s: 194:%08x 198:%08x 2a0:%08x 2a4:%08x\n", __func__, - sw_r32(0x194), sw_r32(0x198), sw_r32(0x2a0), sw_r32(0x2a4)); -} - -u32 rtl9300_sds_mode_get(int sds_num) -{ - u32 v; - - if (sds_num < 0 || sds_num > 11) { - pr_err("Wrong SerDes number: %d\n", sds_num); - return 0; - } - - v = sw_r32(rtl9300_sds_regs[sds_num]); - v >>= rtl9300_sds_lsb[sds_num]; - - return v & RTL930X_SDS_MASK; -} - -/* On the RTL839x family of SoCs with inbuilt SerDes, these SerDes are accessed through - * a 2048 bit register that holds the contents of the PHY being simulated by the SoC. - */ -int rtl839x_read_sds_phy(int phy_addr, int phy_reg) -{ - int offset = 0; - int reg; - u32 val; - - if (phy_addr == 49) - offset = 0x100; - - /* For the RTL8393 internal SerDes, we simulate a PHY ID in registers 2/3 - * which would otherwise read as 0. - */ - if (soc_info.id == 0x8393) { - if (phy_reg == MII_PHYSID1) - return 0x1c; - if (phy_reg == MII_PHYSID2) - return 0x8393; - } - - /* Register RTL839X_SDS12_13_XSG0 is 2048 bit broad, the MSB (bit 15) of the - * 0th PHY register is bit 1023 (in byte 0x80). Because PHY-registers are 16 - * bit broad, we offset by reg << 1. In the SoC 2 registers are stored in - * one 32 bit register. - */ - reg = (phy_reg << 1) & 0xfc; - val = sw_r32(RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); - - if (phy_reg & 1) - val = (val >> 16) & 0xffff; - else - val &= 0xffff; - - return val; -} - -/* On the RTL930x family of SoCs, the internal SerDes are accessed through an IO - * register which simulates commands to an internal MDIO bus. - */ -int rtl930x_read_sds_phy(int phy_addr, int page, int phy_reg) -{ - int i; - u32 cmd = phy_addr << 2 | page << 7 | phy_reg << 13 | 1; - - sw_w32(cmd, RTL930X_SDS_INDACS_CMD); - - for (i = 0; i < 100; i++) { - if (!(sw_r32(RTL930X_SDS_INDACS_CMD) & 0x1)) - break; - mdelay(1); - } - - if (i >= 100) - return -EIO; - - return sw_r32(RTL930X_SDS_INDACS_DATA) & 0xffff; -} - -int rtl930x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v) -{ - int i; - u32 cmd; - - sw_w32(v, RTL930X_SDS_INDACS_DATA); - cmd = phy_addr << 2 | page << 7 | phy_reg << 13 | 0x3; - - sw_w32(cmd, RTL930X_SDS_INDACS_CMD); - - for (i = 0; i < 100; i++) { - if (!(sw_r32(RTL930X_SDS_INDACS_CMD) & 0x1)) - break; - mdelay(1); - } - - - if (i >= 100) { - pr_info("%s ERROR !!!!!!!!!!!!!!!!!!!!\n", __func__); - return -EIO; - } - - return 0; -} - -int rtl931x_read_sds_phy(int phy_addr, int page, int phy_reg) -{ - int i; - u32 cmd = phy_addr << 2 | page << 7 | phy_reg << 13 | 1; - - pr_debug("%s: phy_addr(SDS-ID) %d, phy_reg: %d\n", __func__, phy_addr, phy_reg); - sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL); - - for (i = 0; i < 100; i++) { - if (!(sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) & 0x1)) - break; - mdelay(1); - } - - if (i >= 100) - return -EIO; - - pr_debug("%s: returning %04x\n", __func__, sw_r32(RTL931X_SERDES_INDRT_DATA_CTRL) & 0xffff); - - return sw_r32(RTL931X_SERDES_INDRT_DATA_CTRL) & 0xffff; -} - -int rtl931x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v) -{ - int i; - u32 cmd; - - cmd = phy_addr << 2 | page << 7 | phy_reg << 13; - sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL); - - sw_w32(v, RTL931X_SERDES_INDRT_DATA_CTRL); - - cmd = sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) | 0x3; - sw_w32(cmd, RTL931X_SERDES_INDRT_ACCESS_CTRL); - - for (i = 0; i < 100; i++) { - if (!(sw_r32(RTL931X_SERDES_INDRT_ACCESS_CTRL) & 0x1)) - break; - mdelay(1); - } - - if (i >= 100) - return -EIO; - - return 0; -} - -/* On the RTL838x SoCs, the internal SerDes is accessed through direct access to - * standard PHY registers, where a 32 bit register holds a 16 bit word as found - * in a standard page 0 of a PHY - */ -int rtl838x_read_sds_phy(int phy_addr, int phy_reg) -{ - int offset = 0; - u32 val; - - if (phy_addr == 26) - offset = 0x100; - val = sw_r32(RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)) & 0xffff; - - return val; -} - -int rtl839x_write_sds_phy(int phy_addr, int phy_reg, u16 v) -{ - int offset = 0; - int reg; - u32 val; - - if (phy_addr == 49) - offset = 0x100; - - reg = (phy_reg << 1) & 0xfc; - val = v; - if (phy_reg & 1) { - val = val << 16; - sw_w32_mask(0xffff0000, val, - RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); - } else { - sw_w32_mask(0xffff, val, - RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); - } - - return 0; -} - -/* Read the link and speed status of the 2 internal SGMII/1000Base-X - * ports of the RTL838x SoCs - */ -static int rtl8380_read_status(struct phy_device *phydev) -{ - int err; - - err = genphy_read_status(phydev); - - if (phydev->link) { - phydev->speed = SPEED_1000; - phydev->duplex = DUPLEX_FULL; - } - - return err; -} - -/* Read the link and speed status of the 2 internal SGMII/1000Base-X - * ports of the RTL8393 SoC - */ -static int rtl8393_read_status(struct phy_device *phydev) -{ - int offset = 0; - int err; - int phy_addr = phydev->mdio.addr; - u32 v; - - err = genphy_read_status(phydev); - if (phy_addr == 49) - offset = 0x100; - - if (phydev->link) { - phydev->speed = SPEED_100; - /* Read SPD_RD_00 (bit 13) and SPD_RD_01 (bit 6) out of the internal - * PHY registers - */ - v = sw_r32(RTL839X_SDS12_13_XSG0 + offset + 0x80); - if (!(v & (1 << 13)) && (v & (1 << 6))) - phydev->speed = SPEED_1000; - phydev->duplex = DUPLEX_FULL; - } - - return err; -} - -static int rtl821x_read_page(struct phy_device *phydev) -{ - return __phy_read(phydev, RTL8XXX_PAGE_SELECT); -} - -static int rtl821x_write_page(struct phy_device *phydev, int page) -{ - return __phy_write(phydev, RTL8XXX_PAGE_SELECT, page); -} - -static int rtl8226_read_status(struct phy_device *phydev) -{ - int ret = 0; - u32 val; - -/* TODO: ret = genphy_read_status(phydev); - * if (ret < 0) { - * pr_info("%s: genphy_read_status failed\n", __func__); - * return ret; - * } - */ - - /* Link status must be read twice */ - for (int i = 0; i < 2; i++) - val = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA402); - - phydev->link = val & BIT(2) ? 1 : 0; - if (!phydev->link) - goto out; - - /* Read duplex status */ - val = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA434); - if (val < 0) - goto out; - phydev->duplex = !!(val & BIT(3)); - - /* Read speed */ - val = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA434); - switch (val & 0x0630) { - case 0x0000: - phydev->speed = SPEED_10; - break; - case 0x0010: - phydev->speed = SPEED_100; - break; - case 0x0020: - phydev->speed = SPEED_1000; - break; - case 0x0200: - phydev->speed = SPEED_10000; - break; - case 0x0210: - phydev->speed = SPEED_2500; - break; - case 0x0220: - phydev->speed = SPEED_5000; - break; - default: - break; - } - -out: - return ret; -} - -static int rtl8226_advertise_aneg(struct phy_device *phydev) -{ - int ret = 0; - u32 v; - - pr_info("In %s\n", __func__); - - v = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE); - if (v < 0) - goto out; - - v |= ADVERTISE_10HALF; - v |= ADVERTISE_10FULL; - v |= ADVERTISE_100HALF; - v |= ADVERTISE_100FULL; - - ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, v); - - /* Allow 1GBit */ - v = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA412); - if (v < 0) - goto out; - v |= ADVERTISE_1000FULL; - - ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, 0xA412, v); - if (ret < 0) - goto out; - - /* Allow 2.5G */ - v = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL); - if (v < 0) - goto out; - - v |= MDIO_AN_10GBT_CTRL_ADV2_5G; - ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, v); - -out: - return ret; -} - -static int rtl8226_config_aneg(struct phy_device *phydev) -{ - int ret = 0; - u32 v; - - pr_debug("In %s\n", __func__); - if (phydev->autoneg == AUTONEG_ENABLE) { - ret = rtl8226_advertise_aneg(phydev); - if (ret) - goto out; - /* AutoNegotiationEnable */ - v = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); - if (v < 0) - goto out; - - v |= MDIO_AN_CTRL1_ENABLE; /* Enable AN */ - ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, v); - if (ret < 0) - goto out; - - /* RestartAutoNegotiation */ - v = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA400); - if (v < 0) - goto out; - v |= MDIO_AN_CTRL1_RESTART; - - ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, 0xA400, v); - } - -/* TODO: ret = __genphy_config_aneg(phydev, ret); */ - -out: - return ret; -} - -static int rtl8226_get_eee(struct phy_device *phydev, - struct ethtool_eee *e) -{ - u32 val; - int addr = phydev->mdio.addr; - - pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled); - - val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); - if (e->eee_enabled) { - e->eee_enabled = !!(val & MDIO_EEE_100TX); - if (!e->eee_enabled) { - val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2); - e->eee_enabled = !!(val & MDIO_EEE_2_5GT); - } - } - pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled); - - return 0; -} - -static int rtl8226_set_eee(struct phy_device *phydev, struct ethtool_eee *e) -{ - int port = phydev->mdio.addr; - u64 poll_state; - bool an_enabled; - u32 val; - - pr_info("In %s, port %d, enabled %d\n", __func__, port, e->eee_enabled); - - poll_state = disable_polling(port); - - /* Remember aneg state */ - val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); - an_enabled = !!(val & MDIO_AN_CTRL1_ENABLE); - - /* Setup 100/1000MBit */ - val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); - if (e->eee_enabled) - val |= (MDIO_EEE_100TX | MDIO_EEE_1000T); - else - val &= (MDIO_EEE_100TX | MDIO_EEE_1000T); - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val); - - /* Setup 2.5GBit */ - val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2); - if (e->eee_enabled) - val |= MDIO_EEE_2_5GT; - else - val &= MDIO_EEE_2_5GT; - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2, val); - - /* RestartAutoNegotiation */ - val = phy_read_mmd(phydev, MDIO_MMD_VEND2, 0xA400); - val |= MDIO_AN_CTRL1_RESTART; - phy_write_mmd(phydev, MDIO_MMD_VEND2, 0xA400, val); - - resume_polling(poll_state); - - return 0; -} - -static struct fw_header *rtl838x_request_fw(struct phy_device *phydev, - const struct firmware *fw, - const char *name) -{ - struct device *dev = &phydev->mdio.dev; - int err; - struct fw_header *h; - uint32_t checksum, my_checksum; - - err = request_firmware(&fw, name, dev); - if (err < 0) - goto out; - - if (fw->size < sizeof(struct fw_header)) { - pr_err("Firmware size too small.\n"); - err = -EINVAL; - goto out; - } - - h = (struct fw_header *) fw->data; - pr_info("Firmware loaded. Size %d, magic: %08x\n", fw->size, h->magic); - - if (h->magic != 0x83808380) { - pr_err("Wrong firmware file: MAGIC mismatch.\n"); - goto out; - } - - checksum = h->checksum; - h->checksum = 0; - my_checksum = ~crc32(0xFFFFFFFFU, fw->data, fw->size); - if (checksum != my_checksum) { - pr_err("Firmware checksum mismatch.\n"); - err = -EINVAL; - goto out; - } - h->checksum = checksum; - - return h; -out: - dev_err(dev, "Unable to load firmware %s (%d)\n", name, err); - return NULL; -} - -static void rtl821x_phy_setup_package_broadcast(struct phy_device *phydev, bool enable) -{ - int mac = phydev->mdio.addr; - - /* select main page 0 */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); - /* write to 0x8 to register 0x1d on main page 0 */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL); - /* select page 0x266 */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PORT); - /* set phy id and target broadcast bitmap in register 0x16 on page 0x266 */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, 0x16, (enable?0xff00:0x00) | mac); - /* return to main page 0 */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); - /* write to 0x0 to register 0x1d on main page 0 */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - mdelay(1); -} - -static int rtl8390_configure_generic(struct phy_device *phydev) -{ - int mac = phydev->mdio.addr; - u32 val, phy_id; - - val = phy_read(phydev, 2); - phy_id = val << 16; - val = phy_read(phydev, 3); - phy_id |= val; - pr_debug("Phy on MAC %d: %x\n", mac, phy_id); - - /* Read internal PHY ID */ - phy_write_paged(phydev, 31, 27, 0x0002); - val = phy_read_paged(phydev, 31, 28); - - /* Internal RTL8218B, version 2 */ - phydev_info(phydev, "Detected unknown %x\n", val); - - return 0; -} - -static int rtl8380_configure_int_rtl8218b(struct phy_device *phydev) -{ - u32 val, phy_id; - int mac = phydev->mdio.addr; - struct fw_header *h; - u32 *rtl838x_6275B_intPhy_perport; - u32 *rtl8218b_6276B_hwEsd_perport; - - val = phy_read(phydev, 2); - phy_id = val << 16; - val = phy_read(phydev, 3); - phy_id |= val; - pr_debug("Phy on MAC %d: %x\n", mac, phy_id); - - /* Read internal PHY ID */ - phy_write_paged(phydev, 31, 27, 0x0002); - val = phy_read_paged(phydev, 31, 28); - if (val != 0x6275) { - phydev_err(phydev, "Expected internal RTL8218B, found PHY-ID %x\n", val); - return -1; - } - - /* Internal RTL8218B, version 2 */ - phydev_info(phydev, "Detected internal RTL8218B\n"); - - h = rtl838x_request_fw(phydev, &rtl838x_8380_fw, FIRMWARE_838X_8380_1); - if (!h) - return -1; - - if (h->phy != 0x83800000) { - phydev_err(phydev, "Wrong firmware file: PHY mismatch.\n"); - return -1; - } - - rtl838x_6275B_intPhy_perport = (void *)h + sizeof(struct fw_header) + h->parts[8].start; - rtl8218b_6276B_hwEsd_perport = (void *)h + sizeof(struct fw_header) + h->parts[9].start; - - // Currently not used - // if (sw_r32(RTL838X_DMY_REG31) == 0x1) { - // int ipd_flag = 1; - // } - - val = phy_read(phydev, MII_BMCR); - if (val & BMCR_PDOWN) - rtl8380_int_phy_on_off(phydev, true); - else - rtl8380_phy_reset(phydev); - msleep(100); - - /* Ready PHY for patch */ - for (int p = 0; p < 8; p++) { - phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH); - phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, 0x10, 0x0010); - } - msleep(500); - for (int p = 0; p < 8; p++) { - int i; - - for (i = 0; i < 100 ; i++) { - val = phy_package_port_read_paged(phydev, p, RTL821X_PAGE_STATE, 0x10); - if (val & 0x40) - break; - } - if (i >= 100) { - phydev_err(phydev, - "ERROR: Port %d not ready for patch.\n", - mac + p); - return -1; - } - } - for (int p = 0; p < 8; p++) { - int i; - - i = 0; - while (rtl838x_6275B_intPhy_perport[i * 2]) { - phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, - rtl838x_6275B_intPhy_perport[i * 2], - rtl838x_6275B_intPhy_perport[i * 2 + 1]); - i++; - } - i = 0; - while (rtl8218b_6276B_hwEsd_perport[i * 2]) { - phy_package_port_write_paged(phydev, p, RTL83XX_PAGE_RAW, - rtl8218b_6276B_hwEsd_perport[i * 2], - rtl8218b_6276B_hwEsd_perport[i * 2 + 1]); - i++; - } - } - - return 0; -} - -static int rtl8380_configure_ext_rtl8218b(struct phy_device *phydev) -{ - u32 val, ipd, phy_id; - int mac = phydev->mdio.addr; - struct fw_header *h; - u32 *rtl8380_rtl8218b_perchip; - u32 *rtl8218B_6276B_rtl8380_perport; - u32 *rtl8380_rtl8218b_perport; - - if (soc_info.family == RTL8380_FAMILY_ID && mac != 0 && mac != 16) { - phydev_err(phydev, "External RTL8218B must have PHY-IDs 0 or 16!\n"); - return -1; - } - val = phy_read(phydev, 2); - phy_id = val << 16; - val = phy_read(phydev, 3); - phy_id |= val; - pr_info("Phy on MAC %d: %x\n", mac, phy_id); - - /* Read internal PHY ID */ - phy_write_paged(phydev, 31, 27, 0x0002); - val = phy_read_paged(phydev, 31, 28); - if (val != RTL821X_CHIP_ID) { - phydev_err(phydev, "Expected external RTL8218B, found PHY-ID %x\n", val); - return -1; - } - phydev_info(phydev, "Detected external RTL8218B\n"); - - h = rtl838x_request_fw(phydev, &rtl838x_8218b_fw, FIRMWARE_838X_8218b_1); - if (!h) - return -1; - - if (h->phy != 0x8218b000) { - phydev_err(phydev, "Wrong firmware file: PHY mismatch.\n"); - return -1; - } - - rtl8380_rtl8218b_perchip = (void *)h + sizeof(struct fw_header) + h->parts[0].start; - rtl8218B_6276B_rtl8380_perport = (void *)h + sizeof(struct fw_header) + h->parts[1].start; - rtl8380_rtl8218b_perport = (void *)h + sizeof(struct fw_header) + h->parts[2].start; - - val = phy_read(phydev, MII_BMCR); - if (val & BMCR_PDOWN) - rtl8380_int_phy_on_off(phydev, true); - else - rtl8380_phy_reset(phydev); - - msleep(100); - - /* Get Chip revision */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); - phy_write_paged(phydev, RTL83XX_PAGE_RAW, 0x1b, 0x4); - val = phy_read_paged(phydev, RTL83XX_PAGE_RAW, 0x1c); - - phydev_info(phydev, "Detected chip revision %04x\n", val); - - for (int i = 0; rtl8380_rtl8218b_perchip[i * 3] && - rtl8380_rtl8218b_perchip[i * 3 + 1]; i++) { - phy_package_port_write_paged(phydev, rtl8380_rtl8218b_perchip[i * 3], - RTL83XX_PAGE_RAW, rtl8380_rtl8218b_perchip[i * 3 + 1], - rtl8380_rtl8218b_perchip[i * 3 + 2]); - } - - /* Enable PHY */ - for (int i = 0; i < 8; i++) { - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x00, 0x1140); - } - mdelay(100); - - /* Request patch */ - for (int i = 0; i < 8; i++) { - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH); - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x10, 0x0010); - } - - mdelay(300); - - /* Verify patch readiness */ - for (int i = 0; i < 8; i++) { - int l; - - for (l = 0; l < 100; l++) { - val = phy_package_port_read_paged(phydev, i, RTL821X_PAGE_STATE, 0x10); - if (val & 0x40) - break; - } - if (l >= 100) { - phydev_err(phydev, "Could not patch PHY\n"); - return -1; - } - } - - /* Use Broadcast ID method for patching */ - rtl821x_phy_setup_package_broadcast(phydev, true); - - phy_write_paged(phydev, RTL83XX_PAGE_RAW, 30, 8); - phy_write_paged(phydev, 0x26e, 17, 0xb); - phy_write_paged(phydev, 0x26e, 16, 0x2); - mdelay(1); - ipd = phy_read_paged(phydev, 0x26e, 19); - phy_write_paged(phydev, 0, 30, 0); - ipd = (ipd >> 4) & 0xf; /* unused ? */ - - for (int i = 0; rtl8218B_6276B_rtl8380_perport[i * 2]; i++) { - phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8218B_6276B_rtl8380_perport[i * 2], - rtl8218B_6276B_rtl8380_perport[i * 2 + 1]); - } - - /* Disable broadcast ID */ - rtl821x_phy_setup_package_broadcast(phydev, false); - - return 0; -} - -static int rtl8218b_ext_match_phy_device(struct phy_device *phydev) -{ - int addr = phydev->mdio.addr; - - /* Both the RTL8214FC and the external RTL8218B have the same - * PHY ID. On the RTL838x, the RTL8218B can only be attached_dev - * at PHY IDs 0-7, while the RTL8214FC must be attached via - * the pair of SGMII/1000Base-X with higher PHY-IDs - */ - if (soc_info.family == RTL8380_FAMILY_ID) - return phydev->phy_id == PHY_ID_RTL8218B_E && addr < 8; - else - return phydev->phy_id == PHY_ID_RTL8218B_E; -} - -static bool rtl8214fc_media_is_fibre(struct phy_device *phydev) -{ - int mac = phydev->mdio.addr; - - static int reg[] = {16, 19, 20, 21}; - u32 val; - - phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL); - val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]); - phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - - if (val & BMCR_PDOWN) - return false; - - return true; -} - -static void rtl8214fc_power_set(struct phy_device *phydev, int port, bool on) -{ - char *state = on ? "on" : "off"; - - if (port == PORT_FIBRE) { - pr_info("%s: Powering %s FIBRE (port %d)\n", __func__, state, phydev->mdio.addr); - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_FIBRE); - } else { - pr_info("%s: Powering %s COPPER (port %d)\n", __func__, state, phydev->mdio.addr); - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - } - - if (on) { - phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, BMCR_PDOWN, 0); - } else { - phy_modify_paged(phydev, RTL821X_PAGE_POWER, 0x10, 0, BMCR_PDOWN); - } - - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); -} - -static int rtl8214fc_suspend(struct phy_device *phydev) -{ - rtl8214fc_power_set(phydev, PORT_MII, false); - rtl8214fc_power_set(phydev, PORT_FIBRE, false); - - return 0; -} - -static int rtl8214fc_resume(struct phy_device *phydev) -{ - if (rtl8214fc_media_is_fibre(phydev)) { - rtl8214fc_power_set(phydev, PORT_MII, false); - rtl8214fc_power_set(phydev, PORT_FIBRE, true); - } else { - rtl8214fc_power_set(phydev, PORT_FIBRE, false); - rtl8214fc_power_set(phydev, PORT_MII, true); - } - - return 0; -} - -static void rtl8214fc_media_set(struct phy_device *phydev, bool set_fibre) -{ - int mac = phydev->mdio.addr; - - static int reg[] = {16, 19, 20, 21}; - int val; - - pr_info("%s: port %d, set_fibre: %d\n", __func__, mac, set_fibre); - phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL); - val = phy_package_read_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4]); - - val |= BIT(10); - if (set_fibre) { - val &= ~BMCR_PDOWN; - } else { - val |= BMCR_PDOWN; - } - - phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_INTERNAL); - phy_package_write_paged(phydev, RTL821X_PAGE_PORT, reg[mac % 4], val); - phy_package_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - - if (!phydev->suspended) { - if (set_fibre) { - rtl8214fc_power_set(phydev, PORT_MII, false); - rtl8214fc_power_set(phydev, PORT_FIBRE, true); - } else { - rtl8214fc_power_set(phydev, PORT_FIBRE, false); - rtl8214fc_power_set(phydev, PORT_MII, true); - } - } -} - -static int rtl8214fc_set_port(struct phy_device *phydev, int port) -{ - bool is_fibre = (port == PORT_FIBRE ? true : false); - int addr = phydev->mdio.addr; - - pr_debug("%s port %d to %d\n", __func__, addr, port); - - rtl8214fc_media_set(phydev, is_fibre); - - return 0; -} - -static int rtl8214fc_get_port(struct phy_device *phydev) -{ - int addr = phydev->mdio.addr; - - pr_debug("%s: port %d\n", __func__, addr); - if (rtl8214fc_media_is_fibre(phydev)) - return PORT_FIBRE; - - return PORT_MII; -} - -/* Enable EEE on the RTL8218B PHYs - * The method used is not the preferred way (which would be based on the MAC-EEE state, - * but the only way that works since the kernel first enables EEE in the MAC - * and then sets up the PHY. The MAC-based approach would require the oppsite. - */ -void rtl8218d_eee_set(struct phy_device *phydev, bool enable) -{ - u32 val; - bool an_enabled; - - pr_debug("In %s %d, enable %d\n", __func__, phydev->mdio.addr, enable); - /* Set GPHY page to copper */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - - val = phy_read(phydev, MII_BMCR); - an_enabled = val & BMCR_ANENABLE; - - val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV); - val |= MDIO_EEE_1000T | MDIO_EEE_100TX; - phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, enable ? (MDIO_EEE_100TX | MDIO_EEE_1000T) : 0); - - /* 500M EEE ability */ - val = phy_read_paged(phydev, RTL821X_PAGE_GPHY, 20); - if (enable) - val |= BIT(7); - else - val &= ~BIT(7); - phy_write_paged(phydev, RTL821X_PAGE_GPHY, 20, val); - - /* Restart AN if enabled */ - if (an_enabled) { - val = phy_read(phydev, MII_BMCR); - val |= BMCR_ANRESTART; - phy_write(phydev, MII_BMCR, val); - } - - /* GPHY page back to auto */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); -} - -static int rtl8218b_get_eee(struct phy_device *phydev, - struct ethtool_eee *e) -{ - u32 val; - int addr = phydev->mdio.addr; - - pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled); - - /* Set GPHY page to copper */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - - val = phy_read_paged(phydev, 7, MDIO_AN_EEE_ADV); - if (e->eee_enabled) { - /* Verify vs MAC-based EEE */ - e->eee_enabled = !!(val & BIT(7)); - if (!e->eee_enabled) { - val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25); - e->eee_enabled = !!(val & BIT(4)); - } - } - pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled); - - /* GPHY page to auto */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - - return 0; -} - -static int rtl8218d_get_eee(struct phy_device *phydev, - struct ethtool_eee *e) -{ - u32 val; - int addr = phydev->mdio.addr; - - pr_debug("In %s, port %d, was enabled: %d\n", __func__, addr, e->eee_enabled); - - /* Set GPHY page to copper */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - - val = phy_read_paged(phydev, 7, MDIO_AN_EEE_ADV); - if (e->eee_enabled) - e->eee_enabled = !!(val & BIT(7)); - pr_debug("%s: enabled: %d\n", __func__, e->eee_enabled); - - /* GPHY page to auto */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - - return 0; -} - -static int rtl8214fc_set_eee(struct phy_device *phydev, - struct ethtool_eee *e) -{ - u32 poll_state; - int port = phydev->mdio.addr; - bool an_enabled; - u32 val; - - pr_debug("In %s port %d, enabled %d\n", __func__, port, e->eee_enabled); - - if (rtl8214fc_media_is_fibre(phydev)) { - netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", port); - return -ENOTSUPP; - } - - poll_state = disable_polling(port); - - /* Set GPHY page to copper */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - - /* Get auto-negotiation status */ - val = phy_read(phydev, MII_BMCR); - an_enabled = val & BMCR_ANENABLE; - - pr_info("%s: aneg: %d\n", __func__, an_enabled); - val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25); - val &= ~BIT(5); /* Use MAC-based EEE */ - phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val); - - /* Enable 100M (bit 1) / 1000M (bit 2) EEE */ - phy_write_paged(phydev, 7, MDIO_AN_EEE_ADV, e->eee_enabled ? (MDIO_EEE_100TX | MDIO_EEE_1000T) : 0); - - /* 500M EEE ability */ - val = phy_read_paged(phydev, RTL821X_PAGE_GPHY, 20); - if (e->eee_enabled) - val |= BIT(7); - else - val &= ~BIT(7); - - phy_write_paged(phydev, RTL821X_PAGE_GPHY, 20, val); - - /* Restart AN if enabled */ - if (an_enabled) { - pr_info("%s: doing aneg\n", __func__); - val = phy_read(phydev, MII_BMCR); - val |= BMCR_ANRESTART; - phy_write(phydev, MII_BMCR, val); - } - - /* GPHY page back to auto */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - - resume_polling(poll_state); - - return 0; -} - -static int rtl8214fc_get_eee(struct phy_device *phydev, - struct ethtool_eee *e) -{ - int addr = phydev->mdio.addr; - - pr_debug("In %s port %d, enabled %d\n", __func__, addr, e->eee_enabled); - if (rtl8214fc_media_is_fibre(phydev)) { - netdev_err(phydev->attached_dev, "Port %d configured for FIBRE", addr); - return -ENOTSUPP; - } - - return rtl8218b_get_eee(phydev, e); -} - -static int rtl8218b_set_eee(struct phy_device *phydev, struct ethtool_eee *e) -{ - int port = phydev->mdio.addr; - u64 poll_state; - u32 val; - bool an_enabled; - - pr_info("In %s, port %d, enabled %d\n", __func__, port, e->eee_enabled); - - poll_state = disable_polling(port); - - /* Set GPHY page to copper */ - phy_write(phydev, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - val = phy_read(phydev, MII_BMCR); - an_enabled = val & BMCR_ANENABLE; - - if (e->eee_enabled) { - /* 100/1000M EEE Capability */ - phy_write(phydev, 13, 0x0007); - phy_write(phydev, 14, 0x003C); - phy_write(phydev, 13, 0x4007); - phy_write(phydev, 14, 0x0006); - - val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25); - val |= BIT(4); - phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val); - } else { - /* 100/1000M EEE Capability */ - phy_write(phydev, 13, 0x0007); - phy_write(phydev, 14, 0x003C); - phy_write(phydev, 13, 0x0007); - phy_write(phydev, 14, 0x0000); - - val = phy_read_paged(phydev, RTL821X_PAGE_MAC, 25); - val &= ~BIT(4); - phy_write_paged(phydev, RTL821X_PAGE_MAC, 25, val); - } - - /* Restart AN if enabled */ - if (an_enabled) { - val = phy_read(phydev, MII_BMCR); - val |= BMCR_ANRESTART; - phy_write(phydev, MII_BMCR, val); - } - - /* GPHY page back to auto */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - - pr_info("%s done\n", __func__); - resume_polling(poll_state); - - return 0; -} - -static int rtl8218d_set_eee(struct phy_device *phydev, struct ethtool_eee *e) -{ - int addr = phydev->mdio.addr; - u64 poll_state; - - pr_info("In %s, port %d, enabled %d\n", __func__, addr, e->eee_enabled); - - poll_state = disable_polling(addr); - - rtl8218d_eee_set(phydev, (bool) e->eee_enabled); - - resume_polling(poll_state); - - return 0; -} - -static int rtl8214c_match_phy_device(struct phy_device *phydev) -{ - return phydev->phy_id == PHY_ID_RTL8214C; -} - -static int rtl8380_configure_rtl8214c(struct phy_device *phydev) -{ - u32 phy_id, val; - int mac = phydev->mdio.addr; - - val = phy_read(phydev, 2); - phy_id = val << 16; - val = phy_read(phydev, 3); - phy_id |= val; - pr_debug("Phy on MAC %d: %x\n", mac, phy_id); - - phydev_info(phydev, "Detected external RTL8214C\n"); - - /* GPHY auto conf */ - phy_write_paged(phydev, RTL821X_PAGE_GPHY, RTL821XINT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - - return 0; -} - -static int rtl8380_configure_rtl8214fc(struct phy_device *phydev) -{ - int mac = phydev->mdio.addr; - struct fw_header *h; - u32 *rtl8380_rtl8214fc_perchip; - u32 *rtl8380_rtl8214fc_perport; - u32 phy_id; - u32 val; - - val = phy_read(phydev, 2); - phy_id = val << 16; - val = phy_read(phydev, 3); - phy_id |= val; - pr_debug("Phy on MAC %d: %x\n", mac, phy_id); - - /* Read internal PHY id */ - phy_write_paged(phydev, 0, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - phy_write_paged(phydev, 0x1f, 0x1b, 0x0002); - val = phy_read_paged(phydev, 0x1f, 0x1c); - if (val != RTL821X_CHIP_ID) { - phydev_err(phydev, "Expected external RTL8214FC, found PHY-ID %x\n", val); - return -1; - } - phydev_info(phydev, "Detected external RTL8214FC\n"); - - h = rtl838x_request_fw(phydev, &rtl838x_8214fc_fw, FIRMWARE_838X_8214FC_1); - if (!h) - return -1; - - if (h->phy != 0x8214fc00) { - phydev_err(phydev, "Wrong firmware file: PHY mismatch.\n"); - return -1; - } - - rtl8380_rtl8214fc_perchip = (void *)h + sizeof(struct fw_header) + h->parts[0].start; - - rtl8380_rtl8214fc_perport = (void *)h + sizeof(struct fw_header) + h->parts[1].start; - - /* detect phy version */ - phy_write_paged(phydev, RTL83XX_PAGE_RAW, 27, 0x0004); - val = phy_read_paged(phydev, RTL83XX_PAGE_RAW, 28); - - val = phy_read(phydev, 16); - if (val & BMCR_PDOWN) - rtl8380_rtl8214fc_on_off(phydev, true); - else - rtl8380_phy_reset(phydev); - - msleep(100); - phy_write_paged(phydev, 0, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - - for (int i = 0; rtl8380_rtl8214fc_perchip[i * 3] && - rtl8380_rtl8214fc_perchip[i * 3 + 1]; i++) { - u32 page = 0; - - if (rtl8380_rtl8214fc_perchip[i * 3 + 1] == 0x1f) - page = rtl8380_rtl8214fc_perchip[i * 3 + 2]; - if (rtl8380_rtl8214fc_perchip[i * 3 + 1] == 0x13 && page == 0x260) { - val = phy_read_paged(phydev, 0x260, 13); - val = (val & 0x1f00) | (rtl8380_rtl8214fc_perchip[i * 3 + 2] & 0xe0ff); - phy_write_paged(phydev, RTL83XX_PAGE_RAW, - rtl8380_rtl8214fc_perchip[i * 3 + 1], val); - } else { - phy_write_paged(phydev, RTL83XX_PAGE_RAW, - rtl8380_rtl8214fc_perchip[i * 3 + 1], - rtl8380_rtl8214fc_perchip[i * 3 + 2]); - } - } - - /* Force copper medium */ - for (int i = 0; i < 4; i++) { - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_COPPER); - } - - /* Enable PHY */ - for (int i = 0; i < 4; i++) { - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x00, 0x1140); - } - mdelay(100); - - /* Disable Autosensing */ - for (int i = 0; i < 4; i++) { - int l; - - for (l = 0; l < 100; l++) { - val = phy_package_port_read_paged(phydev, i, RTL821X_PAGE_GPHY, 0x10); - if ((val & 0x7) >= 3) - break; - } - if (l >= 100) { - phydev_err(phydev, "Could not disable autosensing\n"); - return -1; - } - } - - /* Request patch */ - for (int i = 0; i < 4; i++) { - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL821X_PAGE_PATCH); - phy_package_port_write_paged(phydev, i, RTL83XX_PAGE_RAW, 0x10, 0x0010); - } - mdelay(300); - - /* Verify patch readiness */ - for (int i = 0; i < 4; i++) { - int l; - - for (l = 0; l < 100; l++) { - val = phy_package_port_read_paged(phydev, i, RTL821X_PAGE_STATE, 0x10); - if (val & 0x40) - break; - } - if (l >= 100) { - phydev_err(phydev, "Could not patch PHY\n"); - return -1; - } - } - /* Use Broadcast ID method for patching */ - rtl821x_phy_setup_package_broadcast(phydev, true); - - for (int i = 0; rtl8380_rtl8214fc_perport[i * 2]; i++) { - phy_write_paged(phydev, RTL83XX_PAGE_RAW, rtl8380_rtl8214fc_perport[i * 2], - rtl8380_rtl8214fc_perport[i * 2 + 1]); - } - - /* Disable broadcast ID */ - rtl821x_phy_setup_package_broadcast(phydev, false); - - /* Auto medium selection */ - for (int i = 0; i < 4; i++) { - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL8XXX_PAGE_SELECT, RTL8XXX_PAGE_MAIN); - phy_write_paged(phydev, RTL83XX_PAGE_RAW, RTL821XEXT_MEDIA_PAGE_SELECT, RTL821X_MEDIA_PAGE_AUTO); - } - - return 0; -} - -static int rtl8214fc_match_phy_device(struct phy_device *phydev) -{ - int addr = phydev->mdio.addr; - - return phydev->phy_id == PHY_ID_RTL8214FC && addr >= 24; -} - -static int rtl8380_configure_serdes(struct phy_device *phydev) -{ - u32 v; - u32 sds_conf_value; - int i; - struct fw_header *h; - u32 *rtl8380_sds_take_reset; - u32 *rtl8380_sds_common; - u32 *rtl8380_sds01_qsgmii_6275b; - u32 *rtl8380_sds23_qsgmii_6275b; - u32 *rtl8380_sds4_fiber_6275b; - u32 *rtl8380_sds5_fiber_6275b; - u32 *rtl8380_sds_reset; - u32 *rtl8380_sds_release_reset; - - phydev_info(phydev, "Detected internal RTL8380 SERDES\n"); - - h = rtl838x_request_fw(phydev, &rtl838x_8218b_fw, FIRMWARE_838X_8380_1); - if (!h) - return -1; - - if (h->magic != 0x83808380) { - phydev_err(phydev, "Wrong firmware file: magic number mismatch.\n"); - return -1; - } - - rtl8380_sds_take_reset = (void *)h + sizeof(struct fw_header) + h->parts[0].start; - - rtl8380_sds_common = (void *)h + sizeof(struct fw_header) + h->parts[1].start; - - rtl8380_sds01_qsgmii_6275b = (void *)h + sizeof(struct fw_header) + h->parts[2].start; - - rtl8380_sds23_qsgmii_6275b = (void *)h + sizeof(struct fw_header) + h->parts[3].start; - - rtl8380_sds4_fiber_6275b = (void *)h + sizeof(struct fw_header) + h->parts[4].start; - - rtl8380_sds5_fiber_6275b = (void *)h + sizeof(struct fw_header) + h->parts[5].start; - - rtl8380_sds_reset = (void *)h + sizeof(struct fw_header) + h->parts[6].start; - - rtl8380_sds_release_reset = (void *)h + sizeof(struct fw_header) + h->parts[7].start; - - /* Back up serdes power off value */ - sds_conf_value = sw_r32(RTL838X_SDS_CFG_REG); - pr_info("SDS power down value: %x\n", sds_conf_value); - - /* take serdes into reset */ - i = 0; - while (rtl8380_sds_take_reset[2 * i]) { - sw_w32(rtl8380_sds_take_reset[2 * i + 1], rtl8380_sds_take_reset[2 * i]); - i++; - udelay(1000); - } - - /* apply common serdes patch */ - i = 0; - while (rtl8380_sds_common[2 * i]) { - sw_w32(rtl8380_sds_common[2 * i + 1], rtl8380_sds_common[2 * i]); - i++; - udelay(1000); - } - - /* internal R/W enable */ - sw_w32(3, RTL838X_INT_RW_CTRL); - - /* SerDes ports 4 and 5 are FIBRE ports */ - sw_w32_mask(0x7 | 0x38, 1 | (1 << 3), RTL838X_INT_MODE_CTRL); - - /* SerDes module settings, SerDes 0-3 are QSGMII */ - v = 0x6 << 25 | 0x6 << 20 | 0x6 << 15 | 0x6 << 10; - /* SerDes 4 and 5 are 1000BX FIBRE */ - v |= 0x4 << 5 | 0x4; - sw_w32(v, RTL838X_SDS_MODE_SEL); - - pr_info("PLL control register: %x\n", sw_r32(RTL838X_PLL_CML_CTRL)); - sw_w32_mask(0xfffffff0, 0xaaaaaaaf & 0xf, RTL838X_PLL_CML_CTRL); - i = 0; - while (rtl8380_sds01_qsgmii_6275b[2 * i]) { - sw_w32(rtl8380_sds01_qsgmii_6275b[2 * i + 1], - rtl8380_sds01_qsgmii_6275b[2 * i]); - i++; - } - - i = 0; - while (rtl8380_sds23_qsgmii_6275b[2 * i]) { - sw_w32(rtl8380_sds23_qsgmii_6275b[2 * i + 1], rtl8380_sds23_qsgmii_6275b[2 * i]); - i++; - } - - i = 0; - while (rtl8380_sds4_fiber_6275b[2 * i]) { - sw_w32(rtl8380_sds4_fiber_6275b[2 * i + 1], rtl8380_sds4_fiber_6275b[2 * i]); - i++; - } - - i = 0; - while (rtl8380_sds5_fiber_6275b[2 * i]) { - sw_w32(rtl8380_sds5_fiber_6275b[2 * i + 1], rtl8380_sds5_fiber_6275b[2 * i]); - i++; - } - - i = 0; - while (rtl8380_sds_reset[2 * i]) { - sw_w32(rtl8380_sds_reset[2 * i + 1], rtl8380_sds_reset[2 * i]); - i++; - } - - i = 0; - while (rtl8380_sds_release_reset[2 * i]) { - sw_w32(rtl8380_sds_release_reset[2 * i + 1], rtl8380_sds_release_reset[2 * i]); - i++; - } - - pr_info("SDS power down value now: %x\n", sw_r32(RTL838X_SDS_CFG_REG)); - sw_w32(sds_conf_value, RTL838X_SDS_CFG_REG); - - pr_info("Configuration of SERDES done\n"); - - return 0; -} - -static int rtl8390_configure_serdes(struct phy_device *phydev) -{ - phydev_info(phydev, "Detected internal RTL8390 SERDES\n"); - - /* In autoneg state, force link, set SR4_CFG_EN_LINK_FIB1G */ - sw_w32_mask(0, 1 << 18, RTL839X_SDS12_13_XSG0 + 0x0a); - - /* Disable EEE: Clear FRE16_EEE_RSG_FIB1G, FRE16_EEE_STD_FIB1G, - * FRE16_C1_PWRSAV_EN_FIB1G, FRE16_C2_PWRSAV_EN_FIB1G - * and FRE16_EEE_QUIET_FIB1G - */ - sw_w32_mask(0x1f << 10, 0, RTL839X_SDS12_13_XSG0 + 0xe0); - - return 0; -} - -void rtl9300_sds_field_w(int sds, u32 page, u32 reg, int end_bit, int start_bit, u32 v) -{ - int l = end_bit - start_bit + 1; - u32 data = v; - - if (l < 32) { - u32 mask = BIT(l) - 1; - - data = rtl930x_read_sds_phy(sds, page, reg); - data &= ~(mask << start_bit); - data |= (v & mask) << start_bit; - } - - rtl930x_write_sds_phy(sds, page, reg, data); -} - -u32 rtl9300_sds_field_r(int sds, u32 page, u32 reg, int end_bit, int start_bit) -{ - int l = end_bit - start_bit + 1; - u32 v = rtl930x_read_sds_phy(sds, page, reg); - - if (l >= 32) - return v; - - return (v >> start_bit) & (BIT(l) - 1); -} - -/* Read the link and speed status of the internal SerDes of the RTL9300 - */ -static int rtl9300_read_status(struct phy_device *phydev) -{ - struct device *dev = &phydev->mdio.dev; - int phy_addr = phydev->mdio.addr; - struct device_node *dn; - u32 sds_num = 0, status, latch_status, mode; - - if (dev->of_node) { - dn = dev->of_node; - - if (of_property_read_u32(dn, "sds", &sds_num)) - sds_num = -1; - pr_info("%s: Port %d, SerDes is %d\n", __func__, phy_addr, sds_num); - } else { - dev_err(dev, "No DT node.\n"); - return -EINVAL; - } - - if (sds_num < 0) - return 0; - - mode = rtl9300_sds_mode_get(sds_num); - pr_info("%s got SDS mode %02x\n", __func__, mode); - if (mode == RTL930X_SDS_OFF) - mode = rtl9300_sds_field_r(sds_num, 0x1f, 9, 11, 7); - if (mode == RTL930X_SDS_MODE_10GBASER) { /* 10GR mode */ - status = rtl9300_sds_field_r(sds_num, 0x5, 0, 12, 12); - latch_status = rtl9300_sds_field_r(sds_num, 0x4, 1, 2, 2); - status |= rtl9300_sds_field_r(sds_num, 0x5, 0, 12, 12); - latch_status |= rtl9300_sds_field_r(sds_num, 0x4, 1, 2, 2); - } else { - status = rtl9300_sds_field_r(sds_num, 0x1, 29, 8, 0); - latch_status = rtl9300_sds_field_r(sds_num, 0x1, 30, 8, 0); - status |= rtl9300_sds_field_r(sds_num, 0x1, 29, 8, 0); - latch_status |= rtl9300_sds_field_r(sds_num, 0x1, 30, 8, 0); - } - - pr_info("%s link status: status: %d, latch %d\n", __func__, status, latch_status); - - if (latch_status) { - phydev->link = true; - if (mode == RTL930X_SDS_MODE_10GBASER) { - phydev->speed = SPEED_10000; - phydev->interface = PHY_INTERFACE_MODE_10GBASER; - } else { - phydev->speed = SPEED_1000; - phydev->interface = PHY_INTERFACE_MODE_1000BASEX; - } - - phydev->duplex = DUPLEX_FULL; - } - - return 0; -} - -void rtl930x_sds_rx_rst(int sds_num, phy_interface_t phy_if) -{ - int page = 0x2e; /* 10GR and USXGMII */ - - if (phy_if == PHY_INTERFACE_MODE_1000BASEX) - page = 0x24; - - rtl9300_sds_field_w(sds_num, page, 0x15, 4, 4, 0x1); - mdelay(5); - rtl9300_sds_field_w(sds_num, page, 0x15, 4, 4, 0x0); -} - -/* Force PHY modes on 10GBit Serdes - */ -void rtl9300_force_sds_mode(int sds, phy_interface_t phy_if) -{ - int lc_value; - int sds_mode; - bool lc_on; - int lane_0 = (sds % 2) ? sds - 1 : sds; - u32 v; - - pr_info("%s: SDS: %d, mode %d\n", __func__, sds, phy_if); - switch (phy_if) { - case PHY_INTERFACE_MODE_SGMII: - sds_mode = RTL930X_SDS_MODE_SGMII; - lc_on = false; - lc_value = 0x1; - break; - - case PHY_INTERFACE_MODE_HSGMII: - sds_mode = RTL930X_SDS_MODE_HSGMII; - lc_value = 0x3; - /* Configure LC */ - break; - - case PHY_INTERFACE_MODE_1000BASEX: - sds_mode = RTL930X_SDS_MODE_1000BASEX; - lc_on = false; - break; - - case PHY_INTERFACE_MODE_2500BASEX: - sds_mode = RTL930X_SDS_MODE_2500BASEX; - lc_value = 0x3; - /* Configure LC */ - break; - - case PHY_INTERFACE_MODE_10GBASER: - sds_mode = RTL930X_SDS_MODE_10GBASER; - lc_on = true; - lc_value = 0x5; - break; - - case PHY_INTERFACE_MODE_NA: - /* This will disable SerDes */ - sds_mode = RTL930X_SDS_OFF; - break; - - default: - pr_err("%s: unknown serdes mode: %s\n", - __func__, phy_modes(phy_if)); - return; - } - - pr_info("%s --------------------- serdes %d forcing to %x ...\n", __func__, sds, sds_mode); - /* Power down SerDes */ - rtl9300_sds_field_w(sds, 0x20, 0, 7, 6, 0x3); - if (sds == 5) pr_info("%s after %x\n", __func__, rtl930x_read_sds_phy(sds, 0x20, 0)); - - if (sds == 5) pr_info("%s a %x\n", __func__, rtl930x_read_sds_phy(sds, 0x1f, 9)); - /* Force mode enable */ - rtl9300_sds_field_w(sds, 0x1f, 9, 6, 6, 0x1); - if (sds == 5) pr_info("%s b %x\n", __func__, rtl930x_read_sds_phy(sds, 0x1f, 9)); - - /* SerDes off */ - rtl9300_sds_field_w(sds, 0x1f, 9, 11, 7, RTL930X_SDS_OFF); - - if (phy_if == PHY_INTERFACE_MODE_NA) - return; - - if (sds == 5) pr_info("%s c %x\n", __func__, rtl930x_read_sds_phy(sds, 0x20, 18)); - /* Enable LC and ring */ - rtl9300_sds_field_w(lane_0, 0x20, 18, 3, 0, 0xf); - - if (sds == lane_0) - rtl9300_sds_field_w(lane_0, 0x20, 18, 5, 4, 0x1); - else - rtl9300_sds_field_w(lane_0, 0x20, 18, 7, 6, 0x1); - - rtl9300_sds_field_w(sds, 0x20, 0, 5, 4, 0x3); - - if (lc_on) - rtl9300_sds_field_w(lane_0, 0x20, 18, 11, 8, lc_value); - else - rtl9300_sds_field_w(lane_0, 0x20, 18, 15, 12, lc_value); - - /* Force analog LC & ring on */ - rtl9300_sds_field_w(lane_0, 0x21, 11, 3, 0, 0xf); - - v = lc_on ? 0x3 : 0x1; - - if (sds == lane_0) - rtl9300_sds_field_w(lane_0, 0x20, 18, 5, 4, v); - else - rtl9300_sds_field_w(lane_0, 0x20, 18, 7, 6, v); - - /* Force SerDes mode */ - rtl9300_sds_field_w(sds, 0x1f, 9, 6, 6, 1); - rtl9300_sds_field_w(sds, 0x1f, 9, 11, 7, sds_mode); - - /* Toggle LC or Ring */ - for (int i = 0; i < 20; i++) { - u32 cr_0, cr_1, cr_2; - u32 m_bit, l_bit; - - mdelay(200); - - rtl930x_write_sds_phy(lane_0, 0x1f, 2, 53); - - m_bit = (lane_0 == sds) ? (4) : (5); - l_bit = (lane_0 == sds) ? (4) : (5); - - cr_0 = rtl9300_sds_field_r(lane_0, 0x1f, 20, m_bit, l_bit); - mdelay(10); - cr_1 = rtl9300_sds_field_r(lane_0, 0x1f, 20, m_bit, l_bit); - mdelay(10); - cr_2 = rtl9300_sds_field_r(lane_0, 0x1f, 20, m_bit, l_bit); - - if (cr_0 && cr_1 && cr_2) { - u32 t; - - if (phy_if != PHY_INTERFACE_MODE_10GBASER) - break; - - t = rtl9300_sds_field_r(sds, 0x6, 0x1, 2, 2); - rtl9300_sds_field_w(sds, 0x6, 0x1, 2, 2, 0x1); - - /* Reset FSM */ - rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x1); - mdelay(10); - rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x0); - mdelay(10); - - /* Need to read this twice */ - v = rtl9300_sds_field_r(sds, 0x5, 0, 12, 12); - v = rtl9300_sds_field_r(sds, 0x5, 0, 12, 12); - - rtl9300_sds_field_w(sds, 0x6, 0x1, 2, 2, t); - - /* Reset FSM again */ - rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x1); - mdelay(10); - rtl9300_sds_field_w(sds, 0x6, 0x2, 12, 12, 0x0); - mdelay(10); - - if (v == 1) - break; - } - - m_bit = (phy_if == PHY_INTERFACE_MODE_10GBASER) ? 3 : 1; - l_bit = (phy_if == PHY_INTERFACE_MODE_10GBASER) ? 2 : 0; - - rtl9300_sds_field_w(lane_0, 0x21, 11, m_bit, l_bit, 0x2); - mdelay(10); - rtl9300_sds_field_w(lane_0, 0x21, 11, m_bit, l_bit, 0x3); - } - - rtl930x_sds_rx_rst(sds, phy_if); - - /* Re-enable power */ - rtl9300_sds_field_w(sds, 0x20, 0, 7, 6, 0); - - pr_info("%s --------------------- serdes %d forced to %x DONE\n", __func__, sds, sds_mode); -} - -void rtl9300_sds_tx_config(int sds, phy_interface_t phy_if) -{ - /* parameters: rtl9303_80G_txParam_s2 */ - int impedance = 0x8; - int pre_amp = 0x2; - int main_amp = 0x9; - int post_amp = 0x2; - int pre_en = 0x1; - int post_en = 0x1; - int page; - - switch(phy_if) { - case PHY_INTERFACE_MODE_1000BASEX: - pre_amp = 0x1; - main_amp = 0x9; - post_amp = 0x1; - page = 0x25; - break; - case PHY_INTERFACE_MODE_HSGMII: - case PHY_INTERFACE_MODE_2500BASEX: - pre_amp = 0; - post_amp = 0x8; - pre_en = 0; - page = 0x29; - break; - case PHY_INTERFACE_MODE_10GBASER: - case PHY_INTERFACE_MODE_USXGMII: - case PHY_INTERFACE_MODE_XGMII: - pre_en = 0; - pre_amp = 0; - main_amp = 0x10; - post_amp = 0; - post_en = 0; - page = 0x2f; - break; - default: - pr_err("%s: unsupported PHY mode\n", __func__); - return; - } - - rtl9300_sds_field_w(sds, page, 0x01, 15, 11, pre_amp); - rtl9300_sds_field_w(sds, page, 0x06, 4, 0, post_amp); - rtl9300_sds_field_w(sds, page, 0x07, 0, 0, pre_en); - rtl9300_sds_field_w(sds, page, 0x07, 3, 3, post_en); - rtl9300_sds_field_w(sds, page, 0x07, 8, 4, main_amp); - rtl9300_sds_field_w(sds, page, 0x18, 15, 12, impedance); -} - -/* Wait for clock ready, this assumes the SerDes is in XGMII mode - * timeout is in ms - */ -int rtl9300_sds_clock_wait(int timeout) -{ - u32 v; - unsigned long start = jiffies; - - do { - rtl9300_sds_field_w(2, 0x1f, 0x2, 15, 0, 53); - v = rtl9300_sds_field_r(2, 0x1f, 20, 5, 4); - if (v == 3) - return 0; - } while (jiffies < start + (HZ / 1000) * timeout); - - return 1; -} - -void rtl9300_serdes_mac_link_config(int sds, bool tx_normal, bool rx_normal) -{ - u32 v10, v1; - - v10 = rtl930x_read_sds_phy(sds, 6, 2); /* 10GBit, page 6, reg 2 */ - v1 = rtl930x_read_sds_phy(sds, 0, 0); /* 1GBit, page 0, reg 0 */ - pr_info("%s: registers before %08x %08x\n", __func__, v10, v1); - - v10 &= ~(BIT(13) | BIT(14)); - v1 &= ~(BIT(8) | BIT(9)); - - v10 |= rx_normal ? 0 : BIT(13); - v1 |= rx_normal ? 0 : BIT(9); - - v10 |= tx_normal ? 0 : BIT(14); - v1 |= tx_normal ? 0 : BIT(8); - - rtl930x_write_sds_phy(sds, 6, 2, v10); - rtl930x_write_sds_phy(sds, 0, 0, v1); - - v10 = rtl930x_read_sds_phy(sds, 6, 2); - v1 = rtl930x_read_sds_phy(sds, 0, 0); - pr_info("%s: registers after %08x %08x\n", __func__, v10, v1); -} - -void rtl9300_sds_rxcal_dcvs_manual(u32 sds_num, u32 dcvs_id, bool manual, u32 dvcs_list[]) -{ - if (manual) { - switch(dcvs_id) { - case 0: - rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 14, 14, 0x1); - rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 5, 5, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 4, 0, dvcs_list[1]); - break; - case 1: - rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 13, 13, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 15, 15, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 14, 11, dvcs_list[1]); - break; - case 2: - rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 12, 12, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 10, 10, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 9, 6, dvcs_list[1]); - break; - case 3: - rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 11, 11, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 5, 5, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x1d, 4, 1, dvcs_list[1]); - break; - case 4: - rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 15, 15, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 10, 10, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 9, 6, dvcs_list[1]); - break; - case 5: - rtl9300_sds_field_w(sds_num, 0x2e, 0x02, 11, 11, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 4, 4, dvcs_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x11, 3, 0, dvcs_list[1]); - break; - default: - break; - } - } else { - switch(dcvs_id) { - case 0: - rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 14, 14, 0x0); - break; - case 1: - rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 13, 13, 0x0); - break; - case 2: - rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 12, 12, 0x0); - break; - case 3: - rtl9300_sds_field_w(sds_num, 0x2e, 0x1e, 11, 11, 0x0); - break; - case 4: - rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 15, 15, 0x0); - break; - case 5: - rtl9300_sds_field_w(sds_num, 0x2e, 0x02, 11, 11, 0x0); - break; - default: - break; - } - mdelay(1); - } -} - -void rtl9300_sds_rxcal_dcvs_get(u32 sds_num, u32 dcvs_id, u32 dcvs_list[]) -{ - u32 dcvs_sign_out = 0, dcvs_coef_bin = 0; - bool dcvs_manual; - - if (!(sds_num % 2)) - rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); - else - rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31); - - /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ - rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); - - /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x] */ - rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20); - - switch(dcvs_id) { - case 0: - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x22); - mdelay(1); - - /* ##DCVS0 Read Out */ - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); - dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 14, 14); - break; - - case 1: - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x23); - mdelay(1); - - /* ##DCVS0 Read Out */ - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); - dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 13, 13); - break; - - case 2: - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x24); - mdelay(1); - - /* ##DCVS0 Read Out */ - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); - dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 12, 12); - break; - case 3: - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x25); - mdelay(1); - - /* ##DCVS0 Read Out */ - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); - dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x1e, 11, 11); - break; - - case 4: - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x2c); - mdelay(1); - - /* ##DCVS0 Read Out */ - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); - dcvs_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x01, 15, 15); - break; - - case 5: - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0x2d); - mdelay(1); - - /* ##DCVS0 Read Out */ - dcvs_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 4); - dcvs_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 3, 0); - dcvs_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x02, 11, 11); - break; - - default: - break; - } - - if (dcvs_sign_out) - pr_info("%s DCVS %u Sign: -", __func__, dcvs_id); - else - pr_info("%s DCVS %u Sign: +", __func__, dcvs_id); - - pr_info("DCVS %u even coefficient = %u", dcvs_id, dcvs_coef_bin); - pr_info("DCVS %u manual = %u", dcvs_id, dcvs_manual); - - dcvs_list[0] = dcvs_sign_out; - dcvs_list[1] = dcvs_coef_bin; -} - -void rtl9300_sds_rxcal_leq_manual(u32 sds_num, bool manual, u32 leq_gray) -{ - if (manual) { - rtl9300_sds_field_w(sds_num, 0x2e, 0x18, 15, 15, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x16, 14, 10, leq_gray); - } else { - rtl9300_sds_field_w(sds_num, 0x2e, 0x18, 15, 15, 0x0); - mdelay(100); - } -} - -void rtl9300_sds_rxcal_leq_offset_manual(u32 sds_num, bool manual, u32 offset) -{ - if (manual) { - rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 6, 2, offset); - } else { - rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 6, 2, offset); - mdelay(1); - } -} - -#define GRAY_BITS 5 -u32 rtl9300_sds_rxcal_gray_to_binary(u32 gray_code) -{ - int i, j, m; - u32 g[GRAY_BITS]; - u32 c[GRAY_BITS]; - u32 leq_binary = 0; - - for(i = 0; i < GRAY_BITS; i++) - g[i] = (gray_code & BIT(i)) >> i; - - m = GRAY_BITS - 1; - - c[m] = g[m]; - - for(i = 0; i < m; i++) { - c[i] = g[i]; - for(j = i + 1; j < GRAY_BITS; j++) - c[i] = c[i] ^ g[j]; - } - - for(i = 0; i < GRAY_BITS; i++) - leq_binary += c[i] << i; - - return leq_binary; -} - -u32 rtl9300_sds_rxcal_leq_read(int sds_num) -{ - u32 leq_gray, leq_bin; - bool leq_manual; - - if (!(sds_num % 2)) - rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); - else - rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31); - - /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ - rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); - - /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[0 1 x x x x] */ - rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x10); - mdelay(1); - - /* ##LEQ Read Out */ - leq_gray = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 7, 3); - leq_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x18, 15, 15); - leq_bin = rtl9300_sds_rxcal_gray_to_binary(leq_gray); - - pr_info("LEQ_gray: %u, LEQ_bin: %u", leq_gray, leq_bin); - pr_info("LEQ manual: %u", leq_manual); - - return leq_bin; -} - -void rtl9300_sds_rxcal_vth_manual(u32 sds_num, bool manual, u32 vth_list[]) -{ - if (manual) { - rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, 13, 13, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 5, 3, vth_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x13, 2, 0, vth_list[1]); - } else { - rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, 13, 13, 0x0); - mdelay(10); - } -} - -void rtl9300_sds_rxcal_vth_get(u32 sds_num, u32 vth_list[]) -{ - u32 vth_manual; - - /* ##Page0x1F, Reg0x02[15 0], REG_DBGO_SEL=[0x002F]; */ /* Lane0 */ - /* ##Page0x1F, Reg0x02[15 0], REG_DBGO_SEL=[0x0031]; */ /* Lane1 */ - if (!(sds_num % 2)) - rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); - else - rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31); - - /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ - rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); - /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x] */ - rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20); - /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 1 1 0 0] */ - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0xc); - - mdelay(1); - - /* ##VthP & VthN Read Out */ - vth_list[0] = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 2, 0); /* v_thp set bin */ - vth_list[1] = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 3); /* v_thn set bin */ - - pr_info("vth_set_bin = %d", vth_list[0]); - pr_info("vth_set_bin = %d", vth_list[1]); - - vth_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x0f, 13, 13); - pr_info("Vth Maunal = %d", vth_manual); -} - -void rtl9300_sds_rxcal_tap_manual(u32 sds_num, int tap_id, bool manual, u32 tap_list[]) -{ - if (manual) { - switch(tap_id) { - case 0: - /* ##REG0_LOAD_IN_INIT[0]=1; REG0_TAP0_INIT[5:0]=Tap0_Value */ - rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); - rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 5, 5, tap_list[0]); - rtl9300_sds_field_w(sds_num, 0x2f, 0x03, 4, 0, tap_list[1]); - break; - case 1: - rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); - rtl9300_sds_field_w(sds_num, 0x21, 0x07, 6, 6, tap_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x09, 11, 6, tap_list[1]); - rtl9300_sds_field_w(sds_num, 0x21, 0x07, 5, 5, tap_list[2]); - rtl9300_sds_field_w(sds_num, 0x2f, 0x12, 5, 0, tap_list[3]); - break; - case 2: - rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x09, 5, 5, tap_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x09, 4, 0, tap_list[1]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 11, 11, tap_list[2]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 10, 6, tap_list[3]); - break; - case 3: - rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); - rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 5, 5, tap_list[0]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x0a, 4, 0, tap_list[1]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 5, 5, tap_list[2]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 4, 0, tap_list[3]); - break; - case 4: - rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x1); - rtl9300_sds_field_w(sds_num, 0x2f, 0x01, 5, 5, tap_list[0]); - rtl9300_sds_field_w(sds_num, 0x2f, 0x01, 4, 0, tap_list[1]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 11, 11, tap_list[2]); - rtl9300_sds_field_w(sds_num, 0x2e, 0x06, 10, 6, tap_list[3]); - break; - default: - break; - } - } else { - rtl9300_sds_field_w(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7, 0x0); - mdelay(10); - } -} - -void rtl9300_sds_rxcal_tap_get(u32 sds_num, u32 tap_id, u32 tap_list[]) -{ - u32 tap0_sign_out; - u32 tap0_coef_bin; - u32 tap_sign_out_even; - u32 tap_coef_bin_even; - u32 tap_sign_out_odd; - u32 tap_coef_bin_odd; - bool tap_manual; - - if (!(sds_num % 2)) - rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); - else - rtl930x_write_sds_phy(sds_num - 1, 0x1f, 0x2, 0x31); - - /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ - rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); - /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x] */ - rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20); - - if (!tap_id) { - /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 0 0 0 1] */ - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0); - /* ##Tap1 Even Read Out */ - mdelay(1); - tap0_sign_out = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 5); - tap0_coef_bin = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 0); - - if (tap0_sign_out == 1) - pr_info("Tap0 Sign : -"); - else - pr_info("Tap0 Sign : +"); - - pr_info("tap0_coef_bin = %d", tap0_coef_bin); - - tap_list[0] = tap0_sign_out; - tap_list[1] = tap0_coef_bin; - - tap_manual = !!rtl9300_sds_field_r(sds_num, 0x2e, 0x0f, 7, 7); - pr_info("tap0 manual = %u",tap_manual); - } else { - /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 0 0 0 1] */ - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, tap_id); - mdelay(1); - /* ##Tap1 Even Read Out */ - tap_sign_out_even = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 5); - tap_coef_bin_even = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 0); - - /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 0 1 1 0] */ - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, (tap_id + 5)); - /* ##Tap1 Odd Read Out */ - tap_sign_out_odd = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 5); - tap_coef_bin_odd = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 4, 0); - - if (tap_sign_out_even == 1) - pr_info("Tap %u even sign: -", tap_id); - else - pr_info("Tap %u even sign: +", tap_id); - - pr_info("Tap %u even coefficient = %u", tap_id, tap_coef_bin_even); - - if (tap_sign_out_odd == 1) - pr_info("Tap %u odd sign: -", tap_id); - else - pr_info("Tap %u odd sign: +", tap_id); - - pr_info("Tap %u odd coefficient = %u", tap_id,tap_coef_bin_odd); - - tap_list[0] = tap_sign_out_even; - tap_list[1] = tap_coef_bin_even; - tap_list[2] = tap_sign_out_odd; - tap_list[3] = tap_coef_bin_odd; - - tap_manual = rtl9300_sds_field_r(sds_num, 0x2e, 0x0f, tap_id + 7, tap_id + 7); - pr_info("tap %u manual = %d",tap_id, tap_manual); - } -} - -void rtl9300_do_rx_calibration_1(int sds, phy_interface_t phy_mode) -{ - /* From both rtl9300_rxCaliConf_serdes_myParam and rtl9300_rxCaliConf_phy_myParam */ - int tap0_init_val = 0x1f; /* Initial Decision Fed Equalizer 0 tap */ - int vth_min = 0x0; - - pr_info("start_1.1.1 initial value for sds %d\n", sds); - rtl930x_write_sds_phy(sds, 6, 0, 0); - - /* FGCAL */ - rtl9300_sds_field_w(sds, 0x2e, 0x01, 14, 14, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x1c, 10, 5, 0x20); - rtl9300_sds_field_w(sds, 0x2f, 0x02, 0, 0, 0x01); - - /* DCVS */ - rtl9300_sds_field_w(sds, 0x2e, 0x1e, 14, 11, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x01, 15, 15, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x02, 11, 11, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x1c, 4, 0, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x1d, 15, 11, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x1d, 10, 6, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x1d, 5, 1, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x02, 10, 6, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x11, 4, 0, 0x00); - rtl9300_sds_field_w(sds, 0x2f, 0x00, 3, 0, 0x0f); - rtl9300_sds_field_w(sds, 0x2e, 0x04, 6, 6, 0x01); - rtl9300_sds_field_w(sds, 0x2e, 0x04, 7, 7, 0x01); - - /* LEQ (Long Term Equivalent signal level) */ - rtl9300_sds_field_w(sds, 0x2e, 0x16, 14, 8, 0x00); - - /* DFE (Decision Fed Equalizer) */ - rtl9300_sds_field_w(sds, 0x2f, 0x03, 5, 0, tap0_init_val); - rtl9300_sds_field_w(sds, 0x2e, 0x09, 11, 6, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x09, 5, 0, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x0a, 5, 0, 0x00); - rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x00); - rtl9300_sds_field_w(sds, 0x2f, 0x12, 5, 0, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x0a, 11, 6, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x06, 5, 0, 0x00); - rtl9300_sds_field_w(sds, 0x2f, 0x01, 5, 0, 0x00); - - /* Vth */ - rtl9300_sds_field_w(sds, 0x2e, 0x13, 5, 3, 0x07); - rtl9300_sds_field_w(sds, 0x2e, 0x13, 2, 0, 0x07); - rtl9300_sds_field_w(sds, 0x2f, 0x0b, 5, 3, vth_min); - - pr_info("end_1.1.1 --\n"); - - pr_info("start_1.1.2 Load DFE init. value\n"); - - rtl9300_sds_field_w(sds, 0x2e, 0x0f, 13, 7, 0x7f); - - pr_info("end_1.1.2\n"); - - pr_info("start_1.1.3 disable LEQ training,enable DFE clock\n"); - - rtl9300_sds_field_w(sds, 0x2e, 0x17, 7, 7, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x17, 6, 2, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x0c, 8, 8, 0x00); - rtl9300_sds_field_w(sds, 0x2e, 0x0b, 4, 4, 0x01); - rtl9300_sds_field_w(sds, 0x2e, 0x12, 14, 14, 0x00); - rtl9300_sds_field_w(sds, 0x2f, 0x02, 15, 15, 0x00); - - pr_info("end_1.1.3 --\n"); - - pr_info("start_1.1.4 offset cali setting\n"); - - rtl9300_sds_field_w(sds, 0x2e, 0x0f, 15, 14, 0x03); - - pr_info("end_1.1.4\n"); - - pr_info("start_1.1.5 LEQ and DFE setting\n"); - - /* TODO: make this work for DAC cables of different lengths */ - /* For a 10GBit serdes wit Fibre, SDS 8 or 9 */ - if (phy_mode == PHY_INTERFACE_MODE_10GBASER || PHY_INTERFACE_MODE_1000BASEX) - rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x02); - else - pr_err("%s not PHY-based or SerDes, implement DAC!\n", __func__); - - /* No serdes, check for Aquantia PHYs */ - rtl9300_sds_field_w(sds, 0x2e, 0x16, 3, 2, 0x02); - - rtl9300_sds_field_w(sds, 0x2e, 0x0f, 6, 0, 0x5f); - rtl9300_sds_field_w(sds, 0x2f, 0x05, 7, 2, 0x1f); - rtl9300_sds_field_w(sds, 0x2e, 0x19, 9, 5, 0x1f); - rtl9300_sds_field_w(sds, 0x2f, 0x0b, 15, 9, 0x3c); - rtl9300_sds_field_w(sds, 0x2e, 0x0b, 1, 0, 0x03); - - pr_info("end_1.1.5\n"); -} - -void rtl9300_do_rx_calibration_2_1(u32 sds_num) -{ - pr_info("start_1.2.1 ForegroundOffsetCal_Manual\n"); - - /* Gray config endis to 1 */ - rtl9300_sds_field_w(sds_num, 0x2f, 0x02, 2, 2, 0x01); - - /* ForegroundOffsetCal_Manual(auto mode) */ - rtl9300_sds_field_w(sds_num, 0x2e, 0x01, 14, 14, 0x00); - - pr_info("end_1.2.1"); -} - -void rtl9300_do_rx_calibration_2_2(int sds_num) -{ - /* Force Rx-Run = 0 */ - rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 8, 8, 0x0); - - rtl930x_sds_rx_rst(sds_num, PHY_INTERFACE_MODE_10GBASER); -} - -void rtl9300_do_rx_calibration_2_3(int sds_num) -{ - u32 fgcal_binary, fgcal_gray; - u32 offset_range; - - pr_info("start_1.2.3 Foreground Calibration\n"); - - while(1) { - if (!(sds_num % 2)) - rtl930x_write_sds_phy(sds_num, 0x1f, 0x2, 0x2f); - else - rtl930x_write_sds_phy(sds_num -1 , 0x1f, 0x2, 0x31); - - /* ##Page0x2E, Reg0x15[9], REG0_RX_EN_TEST=[1] */ - rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 9, 9, 0x1); - /* ##Page0x21, Reg0x06[11 6], REG0_RX_DEBUG_SEL=[1 0 x x x x] */ - rtl9300_sds_field_w(sds_num, 0x21, 0x06, 11, 6, 0x20); - /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 1 1 1 1] */ - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0xf); - /* ##FGCAL read gray */ - fgcal_gray = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 0); - /* ##Page0x2F, Reg0x0C[5 0], REG0_COEF_SEL=[0 0 1 1 1 0] */ - rtl9300_sds_field_w(sds_num, 0x2f, 0x0c, 5, 0, 0xe); - /* ##FGCAL read binary */ - fgcal_binary = rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 5, 0); - - pr_info("%s: fgcal_gray: %d, fgcal_binary %d\n", - __func__, fgcal_gray, fgcal_binary); - - offset_range = rtl9300_sds_field_r(sds_num, 0x2e, 0x15, 15, 14); - - if (fgcal_binary > 60 || fgcal_binary < 3) { - if (offset_range == 3) { - pr_info("%s: Foreground Calibration result marginal!", __func__); - break; - } else { - offset_range++; - rtl9300_sds_field_w(sds_num, 0x2e, 0x15, 15, 14, offset_range); - rtl9300_do_rx_calibration_2_2(sds_num); - } - } else { - break; - } - } - pr_info("%s: end_1.2.3\n", __func__); -} - -void rtl9300_do_rx_calibration_2(int sds) -{ - rtl930x_sds_rx_rst(sds, PHY_INTERFACE_MODE_10GBASER); - rtl9300_do_rx_calibration_2_1(sds); - rtl9300_do_rx_calibration_2_2(sds); - rtl9300_do_rx_calibration_2_3(sds); -} - -void rtl9300_sds_rxcal_3_1(int sds_num, phy_interface_t phy_mode) -{ - pr_info("start_1.3.1"); - - /* ##1.3.1 */ - if (phy_mode != PHY_INTERFACE_MODE_10GBASER && phy_mode != PHY_INTERFACE_MODE_1000BASEX) - rtl9300_sds_field_w(sds_num, 0x2e, 0xc, 8, 8, 0); - - rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, 0x0); - rtl9300_sds_rxcal_leq_manual(sds_num, false, 0); - - pr_info("end_1.3.1"); -} - -void rtl9300_sds_rxcal_3_2(int sds_num, phy_interface_t phy_mode) -{ - u32 sum10 = 0, avg10, int10; - int dac_long_cable_offset; - bool eq_hold_enabled; - int i; - - if (phy_mode == PHY_INTERFACE_MODE_10GBASER || phy_mode == PHY_INTERFACE_MODE_1000BASEX) { - /* rtl9300_rxCaliConf_serdes_myParam */ - dac_long_cable_offset = 3; - eq_hold_enabled = true; - } else { - /* rtl9300_rxCaliConf_phy_myParam */ - dac_long_cable_offset = 0; - eq_hold_enabled = false; - } - - if (phy_mode == PHY_INTERFACE_MODE_1000BASEX) - pr_warn("%s: LEQ only valid for 10GR!\n", __func__); - - pr_info("start_1.3.2"); - - for(i = 0; i < 10; i++) { - sum10 += rtl9300_sds_rxcal_leq_read(sds_num); - mdelay(10); - } - - avg10 = (sum10 / 10) + (((sum10 % 10) >= 5) ? 1 : 0); - int10 = sum10 / 10; - - pr_info("sum10:%u, avg10:%u, int10:%u", sum10, avg10, int10); - - if (phy_mode == PHY_INTERFACE_MODE_10GBASER || phy_mode == PHY_INTERFACE_MODE_1000BASEX) { - if (dac_long_cable_offset) { - rtl9300_sds_rxcal_leq_offset_manual(sds_num, 1, dac_long_cable_offset); - rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, eq_hold_enabled); - if (phy_mode == PHY_INTERFACE_MODE_10GBASER) - rtl9300_sds_rxcal_leq_manual(sds_num, true, avg10); - } else { - if (sum10 >= 5) { - rtl9300_sds_rxcal_leq_offset_manual(sds_num, 1, 3); - rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, 0x1); - if (phy_mode == PHY_INTERFACE_MODE_10GBASER) - rtl9300_sds_rxcal_leq_manual(sds_num, true, avg10); - } else { - rtl9300_sds_rxcal_leq_offset_manual(sds_num, 1, 0); - rtl9300_sds_field_w(sds_num, 0x2e, 0x17, 7, 7, 0x1); - if (phy_mode == PHY_INTERFACE_MODE_10GBASER) - rtl9300_sds_rxcal_leq_manual(sds_num, true, avg10); - } - } - } - - pr_info("Sds:%u LEQ = %u",sds_num, rtl9300_sds_rxcal_leq_read(sds_num)); - - pr_info("end_1.3.2"); -} - -void rtl9300_do_rx_calibration_3(int sds_num, phy_interface_t phy_mode) -{ - rtl9300_sds_rxcal_3_1(sds_num, phy_mode); - - if (phy_mode == PHY_INTERFACE_MODE_10GBASER || phy_mode == PHY_INTERFACE_MODE_1000BASEX) - rtl9300_sds_rxcal_3_2(sds_num, phy_mode); -} - -void rtl9300_do_rx_calibration_4_1(int sds_num) -{ - u32 vth_list[2] = {0, 0}; - u32 tap0_list[4] = {0, 0, 0, 0}; - - pr_info("start_1.4.1"); - - /* ##1.4.1 */ - rtl9300_sds_rxcal_vth_manual(sds_num, false, vth_list); - rtl9300_sds_rxcal_tap_manual(sds_num, 0, false, tap0_list); - mdelay(200); - - pr_info("end_1.4.1"); -} - -void rtl9300_do_rx_calibration_4_2(u32 sds_num) -{ - u32 vth_list[2]; - u32 tap_list[4]; - - pr_info("start_1.4.2"); - - rtl9300_sds_rxcal_vth_get(sds_num, vth_list); - rtl9300_sds_rxcal_vth_manual(sds_num, true, vth_list); - - mdelay(100); - - rtl9300_sds_rxcal_tap_get(sds_num, 0, tap_list); - rtl9300_sds_rxcal_tap_manual(sds_num, 0, true, tap_list); - - pr_info("end_1.4.2"); -} - -void rtl9300_do_rx_calibration_4(u32 sds_num) -{ - rtl9300_do_rx_calibration_4_1(sds_num); - rtl9300_do_rx_calibration_4_2(sds_num); -} - -void rtl9300_do_rx_calibration_5_2(u32 sds_num) -{ - u32 tap1_list[4] = {0}; - u32 tap2_list[4] = {0}; - u32 tap3_list[4] = {0}; - u32 tap4_list[4] = {0}; - - pr_info("start_1.5.2"); - - rtl9300_sds_rxcal_tap_manual(sds_num, 1, false, tap1_list); - rtl9300_sds_rxcal_tap_manual(sds_num, 2, false, tap2_list); - rtl9300_sds_rxcal_tap_manual(sds_num, 3, false, tap3_list); - rtl9300_sds_rxcal_tap_manual(sds_num, 4, false, tap4_list); - - mdelay(30); - - pr_info("end_1.5.2"); -} - -void rtl9300_do_rx_calibration_5(u32 sds_num, phy_interface_t phy_mode) -{ - if (phy_mode == PHY_INTERFACE_MODE_10GBASER) /* dfeTap1_4Enable true */ - rtl9300_do_rx_calibration_5_2(sds_num); -} - - -void rtl9300_do_rx_calibration_dfe_disable(u32 sds_num) -{ - u32 tap1_list[4] = {0}; - u32 tap2_list[4] = {0}; - u32 tap3_list[4] = {0}; - u32 tap4_list[4] = {0}; - - rtl9300_sds_rxcal_tap_manual(sds_num, 1, true, tap1_list); - rtl9300_sds_rxcal_tap_manual(sds_num, 2, true, tap2_list); - rtl9300_sds_rxcal_tap_manual(sds_num, 3, true, tap3_list); - rtl9300_sds_rxcal_tap_manual(sds_num, 4, true, tap4_list); - - mdelay(10); -} - -void rtl9300_do_rx_calibration(int sds, phy_interface_t phy_mode) -{ - u32 latch_sts; - - rtl9300_do_rx_calibration_1(sds, phy_mode); - rtl9300_do_rx_calibration_2(sds); - rtl9300_do_rx_calibration_4(sds); - rtl9300_do_rx_calibration_5(sds, phy_mode); - mdelay(20); - - /* Do this only for 10GR mode, SDS active in mode 0x1a */ - if (rtl9300_sds_field_r(sds, 0x1f, 9, 11, 7) == RTL930X_SDS_MODE_10GBASER) { - pr_info("%s: SDS enabled\n", __func__); - latch_sts = rtl9300_sds_field_r(sds, 0x4, 1, 2, 2); - mdelay(1); - latch_sts = rtl9300_sds_field_r(sds, 0x4, 1, 2, 2); - if (latch_sts) { - rtl9300_do_rx_calibration_dfe_disable(sds); - rtl9300_do_rx_calibration_4(sds); - rtl9300_do_rx_calibration_5(sds, phy_mode); - } - } -} - -int rtl9300_sds_sym_err_reset(int sds_num, phy_interface_t phy_mode) -{ - switch (phy_mode) { - case PHY_INTERFACE_MODE_XGMII: - break; - - case PHY_INTERFACE_MODE_10GBASER: - /* Read twice to clear */ - rtl930x_read_sds_phy(sds_num, 5, 1); - rtl930x_read_sds_phy(sds_num, 5, 1); - break; - - case PHY_INTERFACE_MODE_1000BASEX: - rtl9300_sds_field_w(sds_num, 0x1, 24, 2, 0, 0); - rtl9300_sds_field_w(sds_num, 0x1, 3, 15, 8, 0); - rtl9300_sds_field_w(sds_num, 0x1, 2, 15, 0, 0); - break; - - default: - pr_info("%s unsupported phy mode\n", __func__); - return -1; - } - - return 0; -} - -u32 rtl9300_sds_sym_err_get(int sds_num, phy_interface_t phy_mode) -{ - u32 v = 0; - - switch (phy_mode) { - case PHY_INTERFACE_MODE_XGMII: - break; - - case PHY_INTERFACE_MODE_1000BASEX: - case PHY_INTERFACE_MODE_10GBASER: - v = rtl930x_read_sds_phy(sds_num, 5, 1); - return v & 0xff; - - default: - pr_info("%s unsupported PHY-mode\n", __func__); - } - - return v; -} - -int rtl9300_sds_check_calibration(int sds_num, phy_interface_t phy_mode) -{ - u32 errors1, errors2; - - rtl9300_sds_sym_err_reset(sds_num, phy_mode); - rtl9300_sds_sym_err_reset(sds_num, phy_mode); - - /* Count errors during 1ms */ - errors1 = rtl9300_sds_sym_err_get(sds_num, phy_mode); - mdelay(1); - errors2 = rtl9300_sds_sym_err_get(sds_num, phy_mode); - - switch (phy_mode) { - case PHY_INTERFACE_MODE_1000BASEX: - case PHY_INTERFACE_MODE_XGMII: - if ((errors2 - errors1 > 100) || - (errors1 >= 0xffff00) || (errors2 >= 0xffff00)) { - pr_info("%s XSGMII error rate too high\n", __func__); - return 1; - } - break; - case PHY_INTERFACE_MODE_10GBASER: - if (errors2 > 0) { - pr_info("%s 10GBASER error rate too high\n", __func__); - return 1; - } - break; - default: - return 1; - } - - return 0; -} - -void rtl9300_phy_enable_10g_1g(int sds_num) -{ - u32 v; - - /* Enable 1GBit PHY */ - v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_2, MII_BMCR); - pr_info("%s 1gbit phy: %08x\n", __func__, v); - v &= ~BMCR_PDOWN; - rtl930x_write_sds_phy(sds_num, PHY_PAGE_2, MII_BMCR, v); - pr_info("%s 1gbit phy enabled: %08x\n", __func__, v); - - /* Enable 10GBit PHY */ - v = rtl930x_read_sds_phy(sds_num, PHY_PAGE_4, MII_BMCR); - pr_info("%s 10gbit phy: %08x\n", __func__, v); - v &= ~BMCR_PDOWN; - rtl930x_write_sds_phy(sds_num, PHY_PAGE_4, MII_BMCR, v); - pr_info("%s 10gbit phy after: %08x\n", __func__, v); - - /* dal_longan_construct_mac_default_10gmedia_fiber */ - v = rtl930x_read_sds_phy(sds_num, 0x1f, 11); - pr_info("%s set medium: %08x\n", __func__, v); - v |= BIT(1); - rtl930x_write_sds_phy(sds_num, 0x1f, 11, v); - pr_info("%s set medium after: %08x\n", __func__, v); -} - -static int rtl9300_sds_10g_idle(int sds_num); -static void rtl9300_serdes_patch(int sds_num); - -#define RTL930X_MAC_FORCE_MODE_CTRL (0xCA1C) -int rtl9300_serdes_setup(int port, int sds_num, phy_interface_t phy_mode) -{ - int calib_tries = 0; - - /* Turn Off Serdes */ - rtl9300_sds_rst(sds_num, RTL930X_SDS_OFF); - - /* Apply serdes patches */ - rtl9300_serdes_patch(sds_num); - - /* Maybe use dal_longan_sds_init */ - - /* dal_longan_construct_serdesConfig_init */ /* Serdes Construct */ - rtl9300_phy_enable_10g_1g(sds_num); - - /* Disable MAC */ - sw_w32_mask(0, 1, RTL930X_MAC_FORCE_MODE_CTRL + 4 * port); - mdelay(20); - - /* ----> dal_longan_sds_mode_set */ - pr_info("%s: Configuring RTL9300 SERDES %d\n", __func__, sds_num); - - /* Configure link to MAC */ - rtl9300_serdes_mac_link_config(sds_num, true, true); /* MAC Construct */ - - /* Re-Enable MAC */ - sw_w32_mask(1, 0, RTL930X_MAC_FORCE_MODE_CTRL + 4 * port); - - /* Enable SDS in desired mode */ - rtl9300_force_sds_mode(sds_num, phy_mode); - - /* Enable Fiber RX */ - rtl9300_sds_field_w(sds_num, 0x20, 2, 12, 12, 0); - - /* Calibrate SerDes receiver in loopback mode */ - rtl9300_sds_10g_idle(sds_num); - do { - rtl9300_do_rx_calibration(sds_num, phy_mode); - calib_tries++; - mdelay(50); - } while (rtl9300_sds_check_calibration(sds_num, phy_mode) && calib_tries < 3); - if (calib_tries >= 3) - pr_warn("%s: SerDes RX calibration failed\n", __func__); - - /* Leave loopback mode */ - rtl9300_sds_tx_config(sds_num, phy_mode); - - return 0; -} - -static int rtl9300_sds_10g_idle(int sds_num) -{ - bool busy; - int i = 0; - - do { - if (sds_num % 2) { - rtl9300_sds_field_w(sds_num - 1, 0x1f, 0x2, 15, 0, 53); - busy = !!rtl9300_sds_field_r(sds_num - 1, 0x1f, 0x14, 1, 1); - } else { - rtl9300_sds_field_w(sds_num, 0x1f, 0x2, 15, 0, 53); - busy = !!rtl9300_sds_field_r(sds_num, 0x1f, 0x14, 0, 0); - } - i++; - } while (busy && i < 100); - - if (i < 100) - return 0; - - pr_warn("%s WARNING: Waiting for RX idle timed out, SDS %d\n", __func__, sds_num); - return -EIO; -} - -typedef struct { - u8 page; - u8 reg; - u16 data; -} sds_config; - -sds_config rtl9300_a_sds_10gr_lane0[] = -{ - /* 1G */ - {0x00, 0x0E, 0x3053}, {0x01, 0x14, 0x0100}, {0x21, 0x03, 0x8206}, - {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, - {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, {0x21, 0x0E, 0x0000}, - {0x21, 0x0F, 0x0008}, {0x24, 0x00, 0x0668}, {0x24, 0x02, 0xD020}, - {0x24, 0x06, 0xC000}, {0x24, 0x0B, 0x1892}, {0x24, 0x0F, 0xFFDF}, - {0x24, 0x12, 0x03C4}, {0x24, 0x13, 0x027F}, {0x24, 0x14, 0x1311}, - {0x24, 0x16, 0x00C9}, {0x24, 0x17, 0xA100}, {0x24, 0x1A, 0x0001}, - {0x24, 0x1C, 0x0400}, {0x25, 0x01, 0x0300}, {0x25, 0x02, 0x1017}, - {0x25, 0x03, 0xFFDF}, {0x25, 0x05, 0x7F7C}, {0x25, 0x07, 0x8100}, - {0x25, 0x08, 0x0001}, {0x25, 0x09, 0xFFD4}, {0x25, 0x0A, 0x7C2F}, - {0x25, 0x0E, 0x003F}, {0x25, 0x0F, 0x0121}, {0x25, 0x10, 0x0020}, - {0x25, 0x11, 0x8840}, {0x2B, 0x13, 0x0050}, {0x2B, 0x18, 0x8E88}, - {0x2B, 0x19, 0x4902}, {0x2B, 0x1D, 0x2501}, {0x2D, 0x13, 0x0050}, - {0x2D, 0x18, 0x8E88}, {0x2D, 0x19, 0x4902}, {0x2D, 0x1D, 0x2641}, - {0x2F, 0x13, 0x0050}, {0x2F, 0x18, 0x8E88}, {0x2F, 0x19, 0x4902}, - {0x2F, 0x1D, 0x66E1}, - /* 3.125G */ - {0x28, 0x00, 0x0668}, {0x28, 0x02, 0xD020}, {0x28, 0x06, 0xC000}, - {0x28, 0x0B, 0x1892}, {0x28, 0x0F, 0xFFDF}, {0x28, 0x12, 0x01C4}, - {0x28, 0x13, 0x027F}, {0x28, 0x14, 0x1311}, {0x28, 0x16, 0x00C9}, - {0x28, 0x17, 0xA100}, {0x28, 0x1A, 0x0001}, {0x28, 0x1C, 0x0400}, - {0x29, 0x01, 0x0300}, {0x29, 0x02, 0x1017}, {0x29, 0x03, 0xFFDF}, - {0x29, 0x05, 0x7F7C}, {0x29, 0x07, 0x8100}, {0x29, 0x08, 0x0001}, - {0x29, 0x09, 0xFFD4}, {0x29, 0x0A, 0x7C2F}, {0x29, 0x0E, 0x003F}, - {0x29, 0x0F, 0x0121}, {0x29, 0x10, 0x0020}, {0x29, 0x11, 0x8840}, - /* 10G */ - {0x06, 0x0D, 0x0F00}, {0x06, 0x00, 0x0000}, {0x06, 0x01, 0xC800}, - {0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, - {0x21, 0x07, 0xF09F}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, - {0x21, 0x0E, 0x0000}, {0x21, 0x0F, 0x0008}, {0x2E, 0x00, 0xA668}, - {0x2E, 0x02, 0xD020}, {0x2E, 0x06, 0xC000}, {0x2E, 0x0B, 0x1892}, - {0x2E, 0x0F, 0xFFDF}, {0x2E, 0x11, 0x8280}, {0x2E, 0x12, 0x0044}, - {0x2E, 0x13, 0x027F}, {0x2E, 0x14, 0x1311}, {0x2E, 0x17, 0xA100}, - {0x2E, 0x1A, 0x0001}, {0x2E, 0x1C, 0x0400}, {0x2F, 0x01, 0x0300}, - {0x2F, 0x02, 0x1217}, {0x2F, 0x03, 0xFFDF}, {0x2F, 0x05, 0x7F7C}, - {0x2F, 0x07, 0x80C4}, {0x2F, 0x08, 0x0001}, {0x2F, 0x09, 0xFFD4}, - {0x2F, 0x0A, 0x7C2F}, {0x2F, 0x0E, 0x003F}, {0x2F, 0x0F, 0x0121}, - {0x2F, 0x10, 0x0020}, {0x2F, 0x11, 0x8840}, {0x2F, 0x14, 0xE008}, - {0x2B, 0x13, 0x0050}, {0x2B, 0x18, 0x8E88}, {0x2B, 0x19, 0x4902}, - {0x2B, 0x1D, 0x2501}, {0x2D, 0x13, 0x0050}, {0x2D, 0x17, 0x4109}, - {0x2D, 0x18, 0x8E88}, {0x2D, 0x19, 0x4902}, {0x2D, 0x1C, 0x1109}, - {0x2D, 0x1D, 0x2641}, {0x2F, 0x13, 0x0050}, {0x2F, 0x18, 0x8E88}, - {0x2F, 0x19, 0x4902}, {0x2F, 0x1D, 0x76E1}, -}; - -sds_config rtl9300_a_sds_10gr_lane1[] = -{ - /* 1G */ - {0x00, 0x0E, 0x3053}, {0x01, 0x14, 0x0100}, {0x21, 0x03, 0x8206}, - {0x21, 0x06, 0x0010}, {0x21, 0x07, 0xF09F}, {0x21, 0x0A, 0x0003}, - {0x21, 0x0B, 0x0005}, {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, - {0x21, 0x0E, 0x0000}, {0x21, 0x0F, 0x0008}, {0x24, 0x00, 0x0668}, - {0x24, 0x02, 0xD020}, {0x24, 0x06, 0xC000}, {0x24, 0x0B, 0x1892}, - {0x24, 0x0F, 0xFFDF}, {0x24, 0x12, 0x03C4}, {0x24, 0x13, 0x027F}, - {0x24, 0x14, 0x1311}, {0x24, 0x16, 0x00C9}, {0x24, 0x17, 0xA100}, - {0x24, 0x1A, 0x0001}, {0x24, 0x1C, 0x0400}, {0x25, 0x00, 0x820F}, - {0x25, 0x01, 0x0300}, {0x25, 0x02, 0x1017}, {0x25, 0x03, 0xFFDF}, - {0x25, 0x05, 0x7F7C}, {0x25, 0x07, 0x8100}, {0x25, 0x08, 0x0001}, - {0x25, 0x09, 0xFFD4}, {0x25, 0x0A, 0x7C2F}, {0x25, 0x0E, 0x003F}, - {0x25, 0x0F, 0x0121}, {0x25, 0x10, 0x0020}, {0x25, 0x11, 0x8840}, - {0x2B, 0x13, 0x3D87}, {0x2B, 0x14, 0x3108}, {0x2D, 0x13, 0x3C87}, - {0x2D, 0x14, 0x1808}, - /* 3.125G */ - {0x28, 0x00, 0x0668}, {0x28, 0x02, 0xD020}, {0x28, 0x06, 0xC000}, - {0x28, 0x0B, 0x1892}, {0x28, 0x0F, 0xFFDF}, {0x28, 0x12, 0x01C4}, - {0x28, 0x13, 0x027F}, {0x28, 0x14, 0x1311}, {0x28, 0x16, 0x00C9}, - {0x28, 0x17, 0xA100}, {0x28, 0x1A, 0x0001}, {0x28, 0x1C, 0x0400}, - {0x29, 0x00, 0x820F}, {0x29, 0x01, 0x0300}, {0x29, 0x02, 0x1017}, - {0x29, 0x03, 0xFFDF}, {0x29, 0x05, 0x7F7C}, {0x29, 0x07, 0x8100}, - {0x29, 0x08, 0x0001}, {0x29, 0x0A, 0x7C2F}, {0x29, 0x0E, 0x003F}, - {0x29, 0x0F, 0x0121}, {0x29, 0x10, 0x0020}, {0x29, 0x11, 0x8840}, - /* 10G */ - {0x06, 0x0D, 0x0F00}, {0x06, 0x00, 0x0000}, {0x06, 0x01, 0xC800}, - {0x21, 0x03, 0x8206}, {0x21, 0x05, 0x40B0}, {0x21, 0x06, 0x0010}, - {0x21, 0x07, 0xF09F}, {0x21, 0x0A, 0x0003}, {0x21, 0x0B, 0x0005}, - {0x21, 0x0C, 0x0007}, {0x21, 0x0D, 0x6009}, {0x21, 0x0E, 0x0000}, - {0x21, 0x0F, 0x0008}, {0x2E, 0x00, 0xA668}, {0x2E, 0x02, 0xD020}, - {0x2E, 0x06, 0xC000}, {0x2E, 0x0B, 0x1892}, {0x2E, 0x0F, 0xFFDF}, - {0x2E, 0x11, 0x8280}, {0x2E, 0x12, 0x0044}, {0x2E, 0x13, 0x027F}, - {0x2E, 0x14, 0x1311}, {0x2E, 0x17, 0xA100}, {0x2E, 0x1A, 0x0001}, - {0x2E, 0x1C, 0x0400}, {0x2F, 0x00, 0x820F}, {0x2F, 0x01, 0x0300}, - {0x2F, 0x02, 0x1217}, {0x2F, 0x03, 0xFFDF}, {0x2F, 0x05, 0x7F7C}, - {0x2F, 0x07, 0x80C4}, {0x2F, 0x08, 0x0001}, {0x2F, 0x09, 0xFFD4}, - {0x2F, 0x0A, 0x7C2F}, {0x2F, 0x0E, 0x003F}, {0x2F, 0x0F, 0x0121}, - {0x2F, 0x10, 0x0020}, {0x2F, 0x11, 0x8840}, {0x2B, 0x13, 0x3D87}, - {0x2B, 0x14, 0x3108}, {0x2D, 0x13, 0x3C87}, {0x2D, 0x14, 0x1808}, -}; - -static void rtl9300_serdes_patch(int sds_num) -{ - if (sds_num % 2) { - for (int i = 0; i < sizeof(rtl9300_a_sds_10gr_lane1) / sizeof(sds_config); ++i) { - rtl930x_write_sds_phy(sds_num, rtl9300_a_sds_10gr_lane1[i].page, - rtl9300_a_sds_10gr_lane1[i].reg, - rtl9300_a_sds_10gr_lane1[i].data); - } - } else { - for (int i = 0; i < sizeof(rtl9300_a_sds_10gr_lane0) / sizeof(sds_config); ++i) { - rtl930x_write_sds_phy(sds_num, rtl9300_a_sds_10gr_lane0[i].page, - rtl9300_a_sds_10gr_lane0[i].reg, - rtl9300_a_sds_10gr_lane0[i].data); - } - } -} - -int rtl9300_sds_cmu_band_get(int sds) -{ - u32 page; - u32 en; - u32 cmu_band; - -/* page = rtl9300_sds_cmu_page_get(sds); */ - page = 0x25; /* 10GR and 1000BX */ - sds = (sds % 2) ? (sds - 1) : (sds); - - rtl9300_sds_field_w(sds, page, 0x1c, 15, 15, 1); - rtl9300_sds_field_w(sds + 1, page, 0x1c, 15, 15, 1); - - en = rtl9300_sds_field_r(sds, page, 27, 1, 1); - if(!en) { /* Auto mode */ - rtl930x_write_sds_phy(sds, 0x1f, 0x02, 31); - - cmu_band = rtl9300_sds_field_r(sds, 0x1f, 0x15, 5, 1); - } else { - cmu_band = rtl9300_sds_field_r(sds, page, 30, 4, 0); - } - - return cmu_band; -} - -void rtl9310_sds_field_w(int sds, u32 page, u32 reg, int end_bit, int start_bit, u32 v) -{ - int l = end_bit - start_bit + 1; - u32 data = v; - - if (l < 32) { - u32 mask = BIT(l) - 1; - - data = rtl930x_read_sds_phy(sds, page, reg); - data &= ~(mask << start_bit); - data |= (v & mask) << start_bit; - } - - rtl931x_write_sds_phy(sds, page, reg, data); -} - -u32 rtl9310_sds_field_r(int sds, u32 page, u32 reg, int end_bit, int start_bit) -{ - int l = end_bit - start_bit + 1; - u32 v = rtl931x_read_sds_phy(sds, page, reg); - - if (l >= 32) - return v; - - return (v >> start_bit) & (BIT(l) - 1); -} - -static void rtl931x_sds_rst(u32 sds) -{ - u32 o, v, o_mode; - int shift = ((sds & 0x3) << 3); - - /* TODO: We need to lock this! */ - - o = sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); - v = o | BIT(sds); - sw_w32(v, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); - - o_mode = sw_r32(RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); - v = BIT(7) | 0x1F; - sw_w32_mask(0xff << shift, v << shift, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); - sw_w32(o_mode, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); - - sw_w32(o, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); -} - -static void rtl931x_symerr_clear(u32 sds, phy_interface_t mode) -{ - - switch (mode) { - case PHY_INTERFACE_MODE_NA: - break; - case PHY_INTERFACE_MODE_XGMII: - u32 xsg_sdsid_0, xsg_sdsid_1; - - if (sds < 2) - xsg_sdsid_0 = sds; - else - xsg_sdsid_0 = (sds - 1) * 2; - xsg_sdsid_1 = xsg_sdsid_0 + 1; - - for (int i = 0; i < 4; ++i) { - rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 24, 2, 0, i); - rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 3, 15, 8, 0x0); - rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 2, 15, 0, 0x0); - } - - for (int i = 0; i < 4; ++i) { - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 24, 2, 0, i); - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 3, 15, 8, 0x0); - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 2, 15, 0, 0x0); - } - - rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 0, 15, 0, 0x0); - rtl9310_sds_field_w(xsg_sdsid_0, 0x1, 1, 15, 8, 0x0); - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 0, 15, 0, 0x0); - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 1, 15, 8, 0x0); - break; - default: - break; - } - - return; -} - -static u32 rtl931x_get_analog_sds(u32 sds) -{ - u32 sds_map[] = { 0, 1, 2, 3, 6, 7, 10, 11, 14, 15, 18, 19, 22, 23 }; - - if (sds < 14) - return sds_map[sds]; - - return sds; -} - -void rtl931x_sds_fiber_disable(u32 sds) -{ - u32 v = 0x3F; - u32 asds = rtl931x_get_analog_sds(sds); - - rtl9310_sds_field_w(asds, 0x1F, 0x9, 11, 6, v); -} - -static void rtl931x_sds_fiber_mode_set(u32 sds, phy_interface_t mode) -{ - u32 val, asds = rtl931x_get_analog_sds(sds); - - /* clear symbol error count before changing mode */ - rtl931x_symerr_clear(sds, mode); - - val = 0x9F; - sw_w32(val, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); - - switch (mode) { - case PHY_INTERFACE_MODE_SGMII: - val = 0x5; - break; - - case PHY_INTERFACE_MODE_1000BASEX: - /* serdes mode FIBER1G */ - val = 0x9; - break; - - case PHY_INTERFACE_MODE_10GBASER: - case PHY_INTERFACE_MODE_10GKR: - val = 0x35; - break; -/* case MII_10GR1000BX_AUTO: - val = 0x39; - break; */ - - - case PHY_INTERFACE_MODE_USXGMII: - val = 0x1B; - break; - default: - val = 0x25; - } - - pr_info("%s writing analog SerDes Mode value %02x\n", __func__, val); - rtl9310_sds_field_w(asds, 0x1F, 0x9, 11, 6, val); - - return; -} - -static int rtl931x_sds_cmu_page_get(phy_interface_t mode) -{ - switch (mode) { - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_1000BASEX: /* MII_1000BX_FIBER / 100BX_FIBER / 1000BX100BX_AUTO */ - return 0x24; - case PHY_INTERFACE_MODE_HSGMII: - case PHY_INTERFACE_MODE_2500BASEX: /* MII_2500Base_X: */ - return 0x28; -/* case MII_HISGMII_5G: */ -/* return 0x2a; */ - case PHY_INTERFACE_MODE_QSGMII: - return 0x2a; /* Code also has 0x34 */ - case PHY_INTERFACE_MODE_XAUI: /* MII_RXAUI_LITE: */ - return 0x2c; - case PHY_INTERFACE_MODE_XGMII: /* MII_XSGMII */ - case PHY_INTERFACE_MODE_10GKR: - case PHY_INTERFACE_MODE_10GBASER: /* MII_10GR */ - return 0x2e; - default: - return -1; - } - - return -1; -} - -static void rtl931x_cmu_type_set(u32 asds, phy_interface_t mode, int chiptype) -{ - int cmu_type = 0; /* Clock Management Unit */ - u32 cmu_page = 0; - u32 frc_cmu_spd; - u32 evenSds; - u32 lane, frc_lc_mode_bitnum, frc_lc_mode_val_bitnum; - - switch (mode) { - case PHY_INTERFACE_MODE_NA: - case PHY_INTERFACE_MODE_10GKR: - case PHY_INTERFACE_MODE_XGMII: - case PHY_INTERFACE_MODE_10GBASER: - case PHY_INTERFACE_MODE_USXGMII: - return; - -/* case MII_10GR1000BX_AUTO: - if (chiptype) - rtl9310_sds_field_w(asds, 0x24, 0xd, 14, 14, 0); - return; */ - - case PHY_INTERFACE_MODE_QSGMII: - cmu_type = 1; - frc_cmu_spd = 0; - break; - - case PHY_INTERFACE_MODE_HSGMII: - cmu_type = 1; - frc_cmu_spd = 1; - break; - - case PHY_INTERFACE_MODE_1000BASEX: - cmu_type = 1; - frc_cmu_spd = 0; - break; - -/* case MII_1000BX100BX_AUTO: - cmu_type = 1; - frc_cmu_spd = 0; - break; */ - - case PHY_INTERFACE_MODE_SGMII: - cmu_type = 1; - frc_cmu_spd = 0; - break; - - case PHY_INTERFACE_MODE_2500BASEX: - cmu_type = 1; - frc_cmu_spd = 1; - break; - - default: - pr_info("SerDes %d mode is invalid\n", asds); - return; - } - - if (cmu_type == 1) - cmu_page = rtl931x_sds_cmu_page_get(mode); - - lane = asds % 2; - - if (!lane) { - frc_lc_mode_bitnum = 4; - frc_lc_mode_val_bitnum = 5; - } else { - frc_lc_mode_bitnum = 6; - frc_lc_mode_val_bitnum = 7; - } - - evenSds = asds - lane; - - pr_info("%s: cmu_type %0d cmu_page %x frc_cmu_spd %d lane %d asds %d\n", - __func__, cmu_type, cmu_page, frc_cmu_spd, lane, asds); - - if (cmu_type == 1) { - pr_info("%s A CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7)); - rtl9310_sds_field_w(asds, cmu_page, 0x7, 15, 15, 0); - pr_info("%s B CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7)); - if (chiptype) { - rtl9310_sds_field_w(asds, cmu_page, 0xd, 14, 14, 0); - } - - rtl9310_sds_field_w(evenSds, 0x20, 0x12, 3, 2, 0x3); - rtl9310_sds_field_w(evenSds, 0x20, 0x12, frc_lc_mode_bitnum, frc_lc_mode_bitnum, 1); - rtl9310_sds_field_w(evenSds, 0x20, 0x12, frc_lc_mode_val_bitnum, frc_lc_mode_val_bitnum, 0); - rtl9310_sds_field_w(evenSds, 0x20, 0x12, 12, 12, 1); - rtl9310_sds_field_w(evenSds, 0x20, 0x12, 15, 13, frc_cmu_spd); - } - - pr_info("%s CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7)); - return; -} - -static void rtl931x_sds_rx_rst(u32 sds) -{ - u32 asds = rtl931x_get_analog_sds(sds); - - if (sds < 2) - return; - - rtl931x_write_sds_phy(asds, 0x2e, 0x12, 0x2740); - rtl931x_write_sds_phy(asds, 0x2f, 0x0, 0x0); - rtl931x_write_sds_phy(asds, 0x2f, 0x2, 0x2010); - rtl931x_write_sds_phy(asds, 0x20, 0x0, 0xc10); - - rtl931x_write_sds_phy(asds, 0x2e, 0x12, 0x27c0); - rtl931x_write_sds_phy(asds, 0x2f, 0x0, 0xc000); - rtl931x_write_sds_phy(asds, 0x2f, 0x2, 0x6010); - rtl931x_write_sds_phy(asds, 0x20, 0x0, 0xc30); - - mdelay(50); -} - -// Currently not used -// static void rtl931x_sds_disable(u32 sds) -// { -// u32 v = 0x1f; - -// v |= BIT(7); -// sw_w32(v, RTL931X_SERDES_MODE_CTRL + (sds >> 2) * 4); -// } - -static void rtl931x_sds_mii_mode_set(u32 sds, phy_interface_t mode) -{ - u32 val; - - switch (mode) { - case PHY_INTERFACE_MODE_QSGMII: - val = 0x6; - break; - case PHY_INTERFACE_MODE_XGMII: - val = 0x10; /* serdes mode XSGMII */ - break; - case PHY_INTERFACE_MODE_USXGMII: - case PHY_INTERFACE_MODE_2500BASEX: - val = 0xD; - break; - case PHY_INTERFACE_MODE_HSGMII: - val = 0x12; - break; - case PHY_INTERFACE_MODE_SGMII: - val = 0x2; - break; - default: - return; - } - - val |= (1 << 7); - - sw_w32(val, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); -} - -static sds_config sds_config_10p3125g_type1[] = { - { 0x2E, 0x00, 0x0107 }, { 0x2E, 0x01, 0x01A3 }, { 0x2E, 0x02, 0x6A24 }, - { 0x2E, 0x03, 0xD10D }, { 0x2E, 0x04, 0x8000 }, { 0x2E, 0x05, 0xA17E }, - { 0x2E, 0x06, 0xE31D }, { 0x2E, 0x07, 0x800E }, { 0x2E, 0x08, 0x0294 }, - { 0x2E, 0x09, 0x0CE4 }, { 0x2E, 0x0A, 0x7FC8 }, { 0x2E, 0x0B, 0xE0E7 }, - { 0x2E, 0x0C, 0x0200 }, { 0x2E, 0x0D, 0xDF80 }, { 0x2E, 0x0E, 0x0000 }, - { 0x2E, 0x0F, 0x1FC2 }, { 0x2E, 0x10, 0x0C3F }, { 0x2E, 0x11, 0x0000 }, - { 0x2E, 0x12, 0x27C0 }, { 0x2E, 0x13, 0x7E1D }, { 0x2E, 0x14, 0x1300 }, - { 0x2E, 0x15, 0x003F }, { 0x2E, 0x16, 0xBE7F }, { 0x2E, 0x17, 0x0090 }, - { 0x2E, 0x18, 0x0000 }, { 0x2E, 0x19, 0x4000 }, { 0x2E, 0x1A, 0x0000 }, - { 0x2E, 0x1B, 0x8000 }, { 0x2E, 0x1C, 0x011F }, { 0x2E, 0x1D, 0x0000 }, - { 0x2E, 0x1E, 0xC8FF }, { 0x2E, 0x1F, 0x0000 }, { 0x2F, 0x00, 0xC000 }, - { 0x2F, 0x01, 0xF000 }, { 0x2F, 0x02, 0x6010 }, { 0x2F, 0x12, 0x0EE7 }, - { 0x2F, 0x13, 0x0000 } -}; - -static sds_config sds_config_10p3125g_cmu_type1[] = { - { 0x2F, 0x03, 0x4210 }, { 0x2F, 0x04, 0x0000 }, { 0x2F, 0x05, 0x0019 }, - { 0x2F, 0x06, 0x18A6 }, { 0x2F, 0x07, 0x2990 }, { 0x2F, 0x08, 0xFFF4 }, - { 0x2F, 0x09, 0x1F08 }, { 0x2F, 0x0A, 0x0000 }, { 0x2F, 0x0B, 0x8000 }, - { 0x2F, 0x0C, 0x4224 }, { 0x2F, 0x0D, 0x0000 }, { 0x2F, 0x0E, 0x0000 }, - { 0x2F, 0x0F, 0xA470 }, { 0x2F, 0x10, 0x8000 }, { 0x2F, 0x11, 0x037B } -}; - -void rtl931x_sds_init(u32 sds, phy_interface_t mode) -{ - u32 board_sds_tx_type1[] = { - 0x01c3, 0x01c3, 0x01c3, 0x01a3, 0x01a3, 0x01a3, - 0x0143, 0x0143, 0x0143, 0x0143, 0x0163, 0x0163, - }; - u32 board_sds_tx[] = { - 0x1a00, 0x1a00, 0x0200, 0x0200, 0x0200, 0x0200, - 0x01a3, 0x01a3, 0x01a3, 0x01a3, 0x01e3, 0x01e3 - }; - u32 board_sds_tx2[] = { - 0x0dc0, 0x01c0, 0x0200, 0x0180, 0x0160, 0x0123, - 0x0123, 0x0163, 0x01a3, 0x01a0, 0x01c3, 0x09c3, - }; - u32 asds, dSds, ori, model_info, val; - int chiptype = 0; - - asds = rtl931x_get_analog_sds(sds); - - if (sds > 13) - return; - - pr_info("%s: set sds %d to mode %d\n", __func__, sds, mode); - val = rtl9310_sds_field_r(asds, 0x1F, 0x9, 11, 6); - - pr_info("%s: fibermode %08X stored mode 0x%x analog SDS %d", __func__, - rtl931x_read_sds_phy(asds, 0x1f, 0x9), val, asds); - pr_info("%s: SGMII mode %08X in 0x24 0x9 analog SDS %d", __func__, - rtl931x_read_sds_phy(asds, 0x24, 0x9), asds); - pr_info("%s: CMU mode %08X stored even SDS %d", __func__, - rtl931x_read_sds_phy(asds & ~1, 0x20, 0x12), asds & ~1); - pr_info("%s: serdes_mode_ctrl %08X", __func__, RTL931X_SERDES_MODE_CTRL + 4 * (sds >> 2)); - pr_info("%s CMU page 0x24 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x24, 0x7)); - pr_info("%s CMU page 0x26 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x26, 0x7)); - pr_info("%s CMU page 0x28 0x7 %08x\n", __func__, rtl931x_read_sds_phy(asds, 0x28, 0x7)); - pr_info("%s XSG page 0x0 0xe %08x\n", __func__, rtl931x_read_sds_phy(dSds, 0x0, 0xe)); - pr_info("%s XSG2 page 0x0 0xe %08x\n", __func__, rtl931x_read_sds_phy(dSds + 1, 0x0, 0xe)); - - model_info = sw_r32(RTL93XX_MODEL_NAME_INFO); - if ((model_info >> 4) & 0x1) { - pr_info("detected chiptype 1\n"); - chiptype = 1; - } else { - pr_info("detected chiptype 0\n"); - } - - if (sds < 2) - dSds = sds; - else - dSds = (sds - 1) * 2; - - pr_info("%s: 2.5gbit %08X dsds %d", __func__, - rtl931x_read_sds_phy(dSds, 0x1, 0x14), dSds); - - pr_info("%s: RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR 0x%08X\n", __func__, sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR)); - ori = sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); - val = ori | (1 << sds); - sw_w32(val, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); - - switch (mode) { - case PHY_INTERFACE_MODE_NA: - break; - - case PHY_INTERFACE_MODE_XGMII: /* MII_XSGMII */ - - if (chiptype) { - u32 xsg_sdsid_1; - xsg_sdsid_1 = dSds + 1; - /* fifo inv clk */ - rtl9310_sds_field_w(dSds, 0x1, 0x1, 7, 4, 0xf); - rtl9310_sds_field_w(dSds, 0x1, 0x1, 3, 0, 0xf); - - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 0x1, 7, 4, 0xf); - rtl9310_sds_field_w(xsg_sdsid_1, 0x1, 0x1, 3, 0, 0xf); - - } - - rtl9310_sds_field_w(dSds, 0x0, 0xE, 12, 12, 1); - rtl9310_sds_field_w(dSds + 1, 0x0, 0xE, 12, 12, 1); - break; - - case PHY_INTERFACE_MODE_USXGMII: /* MII_USXGMII_10GSXGMII/10GDXGMII/10GQXGMII: */ - u32 op_code = 0x6003; - u32 evenSds; - - if (chiptype) { - rtl9310_sds_field_w(asds, 0x6, 0x2, 12, 12, 1); - - for (int i = 0; i < sizeof(sds_config_10p3125g_type1) / sizeof(sds_config); ++i) { - rtl931x_write_sds_phy(asds, sds_config_10p3125g_type1[i].page - 0x4, sds_config_10p3125g_type1[i].reg, sds_config_10p3125g_type1[i].data); - } - - evenSds = asds - (asds % 2); - - for (int i = 0; i < sizeof(sds_config_10p3125g_cmu_type1) / sizeof(sds_config); ++i) { - rtl931x_write_sds_phy(evenSds, - sds_config_10p3125g_cmu_type1[i].page - 0x4, sds_config_10p3125g_cmu_type1[i].reg, sds_config_10p3125g_cmu_type1[i].data); - } - - rtl9310_sds_field_w(asds, 0x6, 0x2, 12, 12, 0); - } else { - - rtl9310_sds_field_w(asds, 0x2e, 0xd, 6, 0, 0x0); - rtl9310_sds_field_w(asds, 0x2e, 0xd, 7, 7, 0x1); - - rtl9310_sds_field_w(asds, 0x2e, 0x1c, 5, 0, 0x1E); - rtl9310_sds_field_w(asds, 0x2e, 0x1d, 11, 0, 0x00); - rtl9310_sds_field_w(asds, 0x2e, 0x1f, 11, 0, 0x00); - rtl9310_sds_field_w(asds, 0x2f, 0x0, 11, 0, 0x00); - rtl9310_sds_field_w(asds, 0x2f, 0x1, 11, 0, 0x00); - - rtl9310_sds_field_w(asds, 0x2e, 0xf, 12, 6, 0x7F); - rtl931x_write_sds_phy(asds, 0x2f, 0x12, 0xaaa); - - rtl931x_sds_rx_rst(sds); - - rtl931x_write_sds_phy(asds, 0x7, 0x10, op_code); - rtl931x_write_sds_phy(asds, 0x6, 0x1d, 0x0480); - rtl931x_write_sds_phy(asds, 0x6, 0xe, 0x0400); - } - break; - - case PHY_INTERFACE_MODE_10GBASER: /* MII_10GR / MII_10GR1000BX_AUTO: */ - /* configure 10GR fiber mode=1 */ - rtl9310_sds_field_w(asds, 0x1f, 0xb, 1, 1, 1); - - /* init fiber_1g */ - rtl9310_sds_field_w(dSds, 0x3, 0x13, 15, 14, 0); - - rtl9310_sds_field_w(dSds, 0x2, 0x0, 12, 12, 1); - rtl9310_sds_field_w(dSds, 0x2, 0x0, 6, 6, 1); - rtl9310_sds_field_w(dSds, 0x2, 0x0, 13, 13, 0); - - /* init auto */ - rtl9310_sds_field_w(asds, 0x1f, 13, 15, 0, 0x109e); - rtl9310_sds_field_w(asds, 0x1f, 0x6, 14, 10, 0x8); - rtl9310_sds_field_w(asds, 0x1f, 0x7, 10, 4, 0x7f); - break; - - case PHY_INTERFACE_MODE_HSGMII: - rtl9310_sds_field_w(dSds, 0x1, 0x14, 8, 8, 1); - break; - - case PHY_INTERFACE_MODE_1000BASEX: /* MII_1000BX_FIBER */ - rtl9310_sds_field_w(dSds, 0x3, 0x13, 15, 14, 0); - - rtl9310_sds_field_w(dSds, 0x2, 0x0, 12, 12, 1); - rtl9310_sds_field_w(dSds, 0x2, 0x0, 6, 6, 1); - rtl9310_sds_field_w(dSds, 0x2, 0x0, 13, 13, 0); - break; - - case PHY_INTERFACE_MODE_SGMII: - rtl9310_sds_field_w(asds, 0x24, 0x9, 15, 15, 0); - break; - - case PHY_INTERFACE_MODE_2500BASEX: - rtl9310_sds_field_w(dSds, 0x1, 0x14, 8, 8, 1); - break; - - case PHY_INTERFACE_MODE_QSGMII: - default: - pr_info("%s: PHY mode %s not supported by SerDes %d\n", - __func__, phy_modes(mode), sds); - return; - } - - rtl931x_cmu_type_set(asds, mode, chiptype); - - if (sds >= 2 && sds <= 13) { - if (chiptype) - rtl931x_write_sds_phy(asds, 0x2E, 0x1, board_sds_tx_type1[sds - 2]); - else { - val = 0xa0000; - sw_w32(val, RTL931X_CHIP_INFO_ADDR); - val = sw_r32(RTL931X_CHIP_INFO_ADDR); - if (val & BIT(28)) /* consider 9311 etc. RTL9313_CHIP_ID == HWP_CHIP_ID(unit)) */ - { - rtl931x_write_sds_phy(asds, 0x2E, 0x1, board_sds_tx2[sds - 2]); - } else { - rtl931x_write_sds_phy(asds, 0x2E, 0x1, board_sds_tx[sds - 2]); - } - val = 0; - sw_w32(val, RTL931X_CHIP_INFO_ADDR); - } - } - - val = ori & ~BIT(sds); - sw_w32(val, RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR); - pr_debug("%s: RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR 0x%08X\n", __func__, sw_r32(RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR)); - - if (mode == PHY_INTERFACE_MODE_XGMII || - mode == PHY_INTERFACE_MODE_QSGMII || - mode == PHY_INTERFACE_MODE_HSGMII || - mode == PHY_INTERFACE_MODE_SGMII || - mode == PHY_INTERFACE_MODE_USXGMII) { - if (mode == PHY_INTERFACE_MODE_XGMII) - rtl931x_sds_mii_mode_set(sds, mode); - else - rtl931x_sds_fiber_mode_set(sds, mode); - } -} - -int rtl931x_sds_cmu_band_set(int sds, bool enable, u32 band, phy_interface_t mode) -{ - u32 asds; - int page = rtl931x_sds_cmu_page_get(mode); - - sds -= (sds % 2); - sds = sds & ~1; - asds = rtl931x_get_analog_sds(sds); - page += 1; - - if (enable) { - rtl9310_sds_field_w(asds, page, 0x7, 13, 13, 0); - rtl9310_sds_field_w(asds, page, 0x7, 11, 11, 0); - } else { - rtl9310_sds_field_w(asds, page, 0x7, 13, 13, 0); - rtl9310_sds_field_w(asds, page, 0x7, 11, 11, 0); - } - - rtl9310_sds_field_w(asds, page, 0x7, 4, 0, band); - - rtl931x_sds_rst(sds); - - return 0; -} - -int rtl931x_sds_cmu_band_get(int sds, phy_interface_t mode) -{ - int page = rtl931x_sds_cmu_page_get(mode); - u32 asds, band; - - sds -= (sds % 2); - asds = rtl931x_get_analog_sds(sds); - page += 1; - rtl931x_write_sds_phy(asds, 0x1f, 0x02, 73); - - rtl9310_sds_field_w(asds, page, 0x5, 15, 15, 1); - band = rtl9310_sds_field_r(asds, 0x1f, 0x15, 8, 3); - pr_info("%s band is: %d\n", __func__, band); - - return band; -} - - -int rtl931x_link_sts_get(u32 sds) -{ - u32 sts, sts1, latch_sts, latch_sts1; - if (0){ - u32 xsg_sdsid_0, xsg_sdsid_1; - - xsg_sdsid_0 = sds < 2 ? sds : (sds - 1) * 2; - xsg_sdsid_1 = xsg_sdsid_0 + 1; - - sts = rtl9310_sds_field_r(xsg_sdsid_0, 0x1, 29, 8, 0); - sts1 = rtl9310_sds_field_r(xsg_sdsid_1, 0x1, 29, 8, 0); - latch_sts = rtl9310_sds_field_r(xsg_sdsid_0, 0x1, 30, 8, 0); - latch_sts1 = rtl9310_sds_field_r(xsg_sdsid_1, 0x1, 30, 8, 0); - } else { - u32 asds, dsds; - - asds = rtl931x_get_analog_sds(sds); - sts = rtl9310_sds_field_r(asds, 0x5, 0, 12, 12); - latch_sts = rtl9310_sds_field_r(asds, 0x4, 1, 2, 2); - - dsds = sds < 2 ? sds : (sds - 1) * 2; - latch_sts1 = rtl9310_sds_field_r(dsds, 0x2, 1, 2, 2); - sts1 = rtl9310_sds_field_r(dsds, 0x2, 1, 2, 2); - } - - pr_info("%s: serdes %d sts %d, sts1 %d, latch_sts %d, latch_sts1 %d\n", __func__, - sds, sts, sts1, latch_sts, latch_sts1); - - return sts1; -} - -static int rtl8214fc_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) -{ - struct phy_device *phydev = upstream; - - rtl8214fc_media_set(phydev, true); - - return 0; -} - -static void rtl8214fc_sfp_remove(void *upstream) -{ - struct phy_device *phydev = upstream; - - rtl8214fc_media_set(phydev, false); -} - -static const struct sfp_upstream_ops rtl8214fc_sfp_ops = { - .attach = phy_sfp_attach, - .detach = phy_sfp_detach, - .module_insert = rtl8214fc_sfp_insert, - .module_remove = rtl8214fc_sfp_remove, -}; - -static int rtl8214fc_phy_probe(struct phy_device *phydev) -{ - struct device *dev = &phydev->mdio.dev; - int addr = phydev->mdio.addr; - int ret = 0; - - /* 839x has internal SerDes */ - if (soc_info.id == 0x8393) - return -ENODEV; - - /* All base addresses of the PHYs start at multiples of 8 */ - devm_phy_package_join(dev, phydev, addr & (~7), - sizeof(struct rtl83xx_shared_private)); - - if (!(addr % 8)) { - struct rtl83xx_shared_private *shared = phydev->shared->priv; - shared->name = "RTL8214FC"; - /* Configuration must be done while patching still possible */ - ret = rtl8380_configure_rtl8214fc(phydev); - if (ret) - return ret; - } - - return phy_sfp_probe(phydev, &rtl8214fc_sfp_ops); -} - -static int rtl8214c_phy_probe(struct phy_device *phydev) -{ - struct device *dev = &phydev->mdio.dev; - int addr = phydev->mdio.addr; - - /* All base addresses of the PHYs start at multiples of 8 */ - devm_phy_package_join(dev, phydev, addr & (~7), - sizeof(struct rtl83xx_shared_private)); - - if (!(addr % 8)) { - struct rtl83xx_shared_private *shared = phydev->shared->priv; - shared->name = "RTL8214C"; - /* Configuration must be done whil patching still possible */ - return rtl8380_configure_rtl8214c(phydev); - } - - return 0; -} - -static int rtl8218b_ext_phy_probe(struct phy_device *phydev) -{ - struct device *dev = &phydev->mdio.dev; - int addr = phydev->mdio.addr; - - /* All base addresses of the PHYs start at multiples of 8 */ - devm_phy_package_join(dev, phydev, addr & (~7), - sizeof(struct rtl83xx_shared_private)); - - if (!(addr % 8)) { - struct rtl83xx_shared_private *shared = phydev->shared->priv; - shared->name = "RTL8218B (external)"; - if (soc_info.family == RTL8380_FAMILY_ID) { - /* Configuration must be done while patching still possible */ - return rtl8380_configure_ext_rtl8218b(phydev); - } - } - - return 0; -} - -static int rtl8218b_int_phy_probe(struct phy_device *phydev) -{ - struct device *dev = &phydev->mdio.dev; - int addr = phydev->mdio.addr; - - if (soc_info.family != RTL8380_FAMILY_ID) - return -ENODEV; - if (addr >= 24) - return -ENODEV; - - pr_debug("%s: id: %d\n", __func__, addr); - /* All base addresses of the PHYs start at multiples of 8 */ - devm_phy_package_join(dev, phydev, addr & (~7), - sizeof(struct rtl83xx_shared_private)); - - if (!(addr % 8)) { - struct rtl83xx_shared_private *shared = phydev->shared->priv; - shared->name = "RTL8218B (internal)"; - /* Configuration must be done while patching still possible */ - return rtl8380_configure_int_rtl8218b(phydev); - } - - return 0; -} - -static int rtl8218d_phy_probe(struct phy_device *phydev) -{ - struct device *dev = &phydev->mdio.dev; - int addr = phydev->mdio.addr; - - pr_debug("%s: id: %d\n", __func__, addr); - /* All base addresses of the PHYs start at multiples of 8 */ - devm_phy_package_join(dev, phydev, addr & (~7), - sizeof(struct rtl83xx_shared_private)); - - /* All base addresses of the PHYs start at multiples of 8 */ - if (!(addr % 8)) { - struct rtl83xx_shared_private *shared = phydev->shared->priv; - shared->name = "RTL8218D"; - /* Configuration must be done while patching still possible */ -/* TODO: return configure_rtl8218d(phydev); */ - } - - return 0; -} - -static int rtl838x_serdes_probe(struct phy_device *phydev) -{ - int addr = phydev->mdio.addr; - - if (soc_info.family != RTL8380_FAMILY_ID) - return -ENODEV; - if (addr < 24) - return -ENODEV; - - /* On the RTL8380M, PHYs 24-27 connect to the internal SerDes */ - if (soc_info.id == 0x8380) { - if (addr == 24) - return rtl8380_configure_serdes(phydev); - return 0; - } - - return -ENODEV; -} - -static int rtl8393_serdes_probe(struct phy_device *phydev) -{ - int addr = phydev->mdio.addr; - - pr_info("%s: id: %d\n", __func__, addr); - if (soc_info.family != RTL8390_FAMILY_ID) - return -ENODEV; - - if (addr < 24) - return -ENODEV; - - return rtl8390_configure_serdes(phydev); -} - -static int rtl8390_serdes_probe(struct phy_device *phydev) -{ - int addr = phydev->mdio.addr; - - if (soc_info.family != RTL8390_FAMILY_ID) - return -ENODEV; - - if (addr < 24) - return -ENODEV; - - return rtl8390_configure_generic(phydev); -} - -static int rtl9300_serdes_probe(struct phy_device *phydev) -{ - if (soc_info.family != RTL9300_FAMILY_ID) - return -ENODEV; - - phydev_info(phydev, "Detected internal RTL9300 Serdes\n"); - - return 0; -} - -static struct phy_driver rtl83xx_phy_driver[] = { - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8214C), - .name = "Realtek RTL8214C", - .features = PHY_GBIT_FEATURES, - .match_phy_device = rtl8214c_match_phy_device, - .probe = rtl8214c_phy_probe, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC), - .name = "Realtek RTL8214FC", - .features = PHY_GBIT_FIBRE_FEATURES, - .match_phy_device = rtl8214fc_match_phy_device, - .probe = rtl8214fc_phy_probe, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .suspend = rtl8214fc_suspend, - .resume = rtl8214fc_resume, - .set_loopback = genphy_loopback, - .set_port = rtl8214fc_set_port, - .get_port = rtl8214fc_get_port, - .set_eee = rtl8214fc_set_eee, - .get_eee = rtl8214fc_get_eee, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_E), - .name = "Realtek RTL8218B (external)", - .features = PHY_GBIT_FEATURES, - .match_phy_device = rtl8218b_ext_match_phy_device, - .probe = rtl8218b_ext_phy_probe, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - .set_eee = rtl8218b_set_eee, - .get_eee = rtl8218b_get_eee, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8218D), - .name = "REALTEK RTL8218D", - .features = PHY_GBIT_FEATURES, - .probe = rtl8218d_phy_probe, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - .set_eee = rtl8218d_set_eee, - .get_eee = rtl8218d_get_eee, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8221B), - .name = "REALTEK RTL8221B", - .features = PHY_GBIT_FEATURES, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .read_status = rtl8226_read_status, - .config_aneg = rtl8226_config_aneg, - .set_eee = rtl8226_set_eee, - .get_eee = rtl8226_get_eee, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8226), - .name = "REALTEK RTL8226", - .features = PHY_GBIT_FEATURES, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .read_status = rtl8226_read_status, - .config_aneg = rtl8226_config_aneg, - .set_eee = rtl8226_set_eee, - .get_eee = rtl8226_get_eee, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_I), - .name = "Realtek RTL8218B (internal)", - .features = PHY_GBIT_FEATURES, - .probe = rtl8218b_int_phy_probe, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - .set_eee = rtl8218b_set_eee, - .get_eee = rtl8218b_get_eee, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8218B_I), - .name = "Realtek RTL8380 SERDES", - .features = PHY_GBIT_FIBRE_FEATURES, - .probe = rtl838x_serdes_probe, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - .read_status = rtl8380_read_status, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8393_I), - .name = "Realtek RTL8393 SERDES", - .features = PHY_GBIT_FIBRE_FEATURES, - .probe = rtl8393_serdes_probe, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - .read_status = rtl8393_read_status, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL8390_GENERIC), - .name = "Realtek RTL8390 Generic", - .features = PHY_GBIT_FIBRE_FEATURES, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .probe = rtl8390_serdes_probe, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - }, - { - PHY_ID_MATCH_MODEL(PHY_ID_RTL9300_I), - .name = "REALTEK RTL9300 SERDES", - .features = PHY_GBIT_FIBRE_FEATURES, - .read_page = rtl821x_read_page, - .write_page = rtl821x_write_page, - .probe = rtl9300_serdes_probe, - .suspend = genphy_suspend, - .resume = genphy_resume, - .set_loopback = genphy_loopback, - .read_status = rtl9300_read_status, - }, -}; - -module_phy_driver(rtl83xx_phy_driver); - -static struct mdio_device_id __maybe_unused rtl83xx_tbl[] = { - { PHY_ID_MATCH_MODEL(PHY_ID_RTL8214FC) }, - { } -}; - -MODULE_DEVICE_TABLE(mdio, rtl83xx_tbl); - -MODULE_AUTHOR("B. Koblitz"); -MODULE_DESCRIPTION("RTL83xx PHY driver"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h b/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h deleted file mode 100644 index fb79560e6b..0000000000 --- a/target/linux/realtek/files-5.15/drivers/net/phy/rtl83xx-phy.h +++ /dev/null @@ -1,64 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -struct rtl83xx_shared_private { - char *name; -}; - -struct __attribute__ ((__packed__)) part { - uint16_t start; - uint8_t wordsize; - uint8_t words; -}; - -struct __attribute__ ((__packed__)) fw_header { - uint32_t magic; - uint32_t phy; - uint32_t checksum; - uint32_t version; - struct part parts[10]; -}; - -/* TODO: fixed path? */ -#define FIRMWARE_838X_8380_1 "rtl838x_phy/rtl838x_8380.fw" -#define FIRMWARE_838X_8214FC_1 "rtl838x_phy/rtl838x_8214fc.fw" -#define FIRMWARE_838X_8218b_1 "rtl838x_phy/rtl838x_8218b.fw" - -/* External RTL8218B and RTL8214FC IDs are identical */ -#define PHY_ID_RTL8214C 0x001cc942 -#define PHY_ID_RTL8214FC 0x001cc981 -#define PHY_ID_RTL8218B_E 0x001cc981 -#define PHY_ID_RTL8218D 0x001cc983 -#define PHY_ID_RTL8218B_I 0x001cca40 -#define PHY_ID_RTL8221B 0x001cc849 -#define PHY_ID_RTL8226 0x001cc838 -#define PHY_ID_RTL8390_GENERIC 0x001ccab0 -#define PHY_ID_RTL8393_I 0x001c8393 -#define PHY_ID_RTL9300_I 0x70d03106 - -/* Registers of the internal Serdes of the 8380 */ -#define RTL838X_SDS_MODE_SEL (0x0028) -#define RTL838X_SDS_CFG_REG (0x0034) -#define RTL838X_INT_MODE_CTRL (0x005c) -#define RTL838X_DMY_REG31 (0x3b28) - -#define RTL8380_SDS4_FIB_REG0 (0xF800) -#define RTL838X_SDS4_REG28 (0xef80) -#define RTL838X_SDS4_DUMMY0 (0xef8c) -#define RTL838X_SDS5_EXT_REG6 (0xf18c) -#define RTL838X_SDS4_FIB_REG0 (RTL838X_SDS4_REG28 + 0x880) -#define RTL838X_SDS5_FIB_REG0 (RTL838X_SDS4_REG28 + 0x980) - -/* Registers of the internal SerDes of the RTL8390 */ -#define RTL839X_SDS12_13_XSG0 (0xB800) - -/* Registers of the internal Serdes of the 9300 */ -#define RTL930X_SDS_INDACS_CMD (0x03B0) -#define RTL930X_SDS_INDACS_DATA (0x03B4) -#define RTL930X_MAC_FORCE_MODE_CTRL (0xCA1C) - -/* Registers of the internal SerDes of the 9310 */ -#define RTL931X_SERDES_INDRT_ACCESS_CTRL (0x5638) -#define RTL931X_SERDES_INDRT_DATA_CTRL (0x563C) -#define RTL931X_SERDES_MODE_CTRL (0x13cc) -#define RTL931X_PS_SERDES_OFF_MODE_CTRL_ADDR (0x13F4) -#define RTL931X_MAC_SERDES_MODE_CTRL(sds) (0x136C + (((sds) << 2))) diff --git a/target/linux/realtek/files-5.15/include/dt-bindings/clock/rtl83xx-clk.h b/target/linux/realtek/files-5.15/include/dt-bindings/clock/rtl83xx-clk.h deleted file mode 100644 index 3937052cc5..0000000000 --- a/target/linux/realtek/files-5.15/include/dt-bindings/clock/rtl83xx-clk.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2022 Markus Stockhausen - * - * RTL83XX clock indices - */ -#ifndef __DT_BINDINGS_CLOCK_RTL83XX_H -#define __DT_BINDINGS_CLOCK_RTL83XX_H - -#define CLK_CPU 0 -#define CLK_MEM 1 -#define CLK_LXB 2 -#define CLK_COUNT 3 - -#endif /* __DT_BINDINGS_CLOCK_RTL83XX_H */ diff --git a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch b/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch deleted file mode 100644 index 7df22b0725..0000000000 --- a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch +++ /dev/null @@ -1,467 +0,0 @@ -From 293903b9dfe43520f01374dc1661be11d6838c49 Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Thu, 18 Nov 2021 17:29:52 +0100 -Subject: watchdog: Add Realtek Otto watchdog timer - -Realtek MIPS SoCs (platform name Otto) have a watchdog timer with -pretimeout notifitication support. The WDT can (partially) hard reset, -or soft reset the SoC. - -This driver implements all features as described in the devicetree -binding, except the phase2 interrupt, and also functions as a restart -handler. The cpu reset mode is considered to be a "warm" restart, since -this mode does not reset all peripherals. Being an embedded system -though, the "cpu" and "software" modes will still cause the bootloader -to run on restart. - -It is not known how a forced system reset can be disabled on the -supported platforms. This means that the phase2 interrupt will only fire -at the same time as reset, so implementing phase2 is of little use. - -Signed-off-by: Sander Vanheule -Reviewed-by: Guenter Roeck -Link: https://lore.kernel.org/r/6d060bccbdcc709cfa79203485db85aad3c3beb5.1637252610.git.sander@svanheule.net -Signed-off-by: Guenter Roeck ---- - MAINTAINERS | 7 + - drivers/watchdog/Kconfig | 13 ++ - drivers/watchdog/Makefile | 1 + - drivers/watchdog/realtek_otto_wdt.c | 384 ++++++++++++++++++++++++++++++++++++ - 4 files changed, 405 insertions(+) - create mode 100644 drivers/watchdog/realtek_otto_wdt.c - ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -15903,6 +15903,13 @@ S: Maintained - F: include/sound/rt*.h - F: sound/soc/codecs/rt* - -+REALTEK OTTO WATCHDOG -+M: Sander Vanheule -+L: linux-watchdog@vger.kernel.org -+S: Maintained -+F: Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml -+F: driver/watchdog/realtek_otto_wdt.c -+ - REALTEK RTL83xx SMI DSA ROUTER CHIPS - M: Linus Walleij - S: Maintained ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -954,6 +954,19 @@ config RTD119X_WATCHDOG - Say Y here to include support for the watchdog timer in - Realtek RTD1295 SoCs. - -+config REALTEK_OTTO_WDT -+ tristate "Realtek Otto MIPS watchdog support" -+ depends on MACH_REALTEK_RTL || COMPILE_TEST -+ depends on COMMON_CLK -+ select WATCHDOG_CORE -+ default MACH_REALTEK_RTL -+ help -+ Say Y here to include support for the watchdog timer on Realtek -+ RTL838x, RTL839x, RTL930x SoCs. This watchdog has pretimeout -+ notifications and system reset on timeout. -+ -+ When built as a module this will be called realtek_otto_wdt. -+ - config SPRD_WATCHDOG - tristate "Spreadtrum watchdog support" - depends on ARCH_SPRD || COMPILE_TEST ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -171,6 +171,7 @@ obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o - obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o - obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o - obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o -+obj-$(CONFIG_REALTEK_OTTO_WDT) += realtek_otto_wdt.o - - # PARISC Architecture - ---- /dev/null -+++ b/drivers/watchdog/realtek_otto_wdt.c -@@ -0,0 +1,384 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+ -+/* -+ * Realtek Otto MIPS platform watchdog -+ * -+ * Watchdog timer that will reset the system after timeout, using the selected -+ * reset mode. -+ * -+ * Counter scaling and timeouts: -+ * - Base prescale of (2 << 25), providing tick duration T_0: 168ms @ 200MHz -+ * - PRESCALE: logarithmic prescaler adding a factor of {1, 2, 4, 8} -+ * - Phase 1: Times out after (PHASE1 + 1) × PRESCALE × T_0 -+ * Generates an interrupt, WDT cannot be stopped after phase 1 -+ * - Phase 2: starts after phase 1, times out after (PHASE2 + 1) × PRESCALE × T_0 -+ * Resets the system according to RST_MODE -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define OTTO_WDT_REG_CNTR 0x0 -+#define OTTO_WDT_CNTR_PING BIT(31) -+ -+#define OTTO_WDT_REG_INTR 0x4 -+#define OTTO_WDT_INTR_PHASE_1 BIT(31) -+#define OTTO_WDT_INTR_PHASE_2 BIT(30) -+ -+#define OTTO_WDT_REG_CTRL 0x8 -+#define OTTO_WDT_CTRL_ENABLE BIT(31) -+#define OTTO_WDT_CTRL_PRESCALE GENMASK(30, 29) -+#define OTTO_WDT_CTRL_PHASE1 GENMASK(26, 22) -+#define OTTO_WDT_CTRL_PHASE2 GENMASK(19, 15) -+#define OTTO_WDT_CTRL_RST_MODE GENMASK(1, 0) -+#define OTTO_WDT_MODE_SOC 0 -+#define OTTO_WDT_MODE_CPU 1 -+#define OTTO_WDT_MODE_SOFTWARE 2 -+#define OTTO_WDT_CTRL_DEFAULT OTTO_WDT_MODE_CPU -+ -+#define OTTO_WDT_PRESCALE_MAX 3 -+ -+/* -+ * One higher than the max values contained in PHASE{1,2}, since a value of 0 -+ * corresponds to one tick. -+ */ -+#define OTTO_WDT_PHASE_TICKS_MAX 32 -+ -+/* -+ * The maximum reset delay is actually 2×32 ticks, but that would require large -+ * pretimeout values for timeouts longer than 32 ticks. Limit the maximum timeout -+ * to 32 + 1 to ensure small pretimeout values can be configured as expected. -+ */ -+#define OTTO_WDT_TIMEOUT_TICKS_MAX (OTTO_WDT_PHASE_TICKS_MAX + 1) -+ -+struct otto_wdt_ctrl { -+ struct watchdog_device wdev; -+ struct device *dev; -+ void __iomem *base; -+ unsigned int clk_rate_khz; -+ int irq_phase1; -+}; -+ -+static int otto_wdt_start(struct watchdog_device *wdev) -+{ -+ struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); -+ u32 v; -+ -+ v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL); -+ v |= OTTO_WDT_CTRL_ENABLE; -+ iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); -+ -+ return 0; -+} -+ -+static int otto_wdt_stop(struct watchdog_device *wdev) -+{ -+ struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); -+ u32 v; -+ -+ v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL); -+ v &= ~OTTO_WDT_CTRL_ENABLE; -+ iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); -+ -+ return 0; -+} -+ -+static int otto_wdt_ping(struct watchdog_device *wdev) -+{ -+ struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); -+ -+ iowrite32(OTTO_WDT_CNTR_PING, ctrl->base + OTTO_WDT_REG_CNTR); -+ -+ return 0; -+} -+ -+static int otto_wdt_tick_ms(struct otto_wdt_ctrl *ctrl, int prescale) -+{ -+ return DIV_ROUND_CLOSEST(1 << (25 + prescale), ctrl->clk_rate_khz); -+} -+ -+/* -+ * The timer asserts the PHASE1/PHASE2 IRQs when the number of ticks exceeds -+ * the value stored in those fields. This means each phase will run for at least -+ * one tick, so small values need to be clamped to correctly reflect the timeout. -+ */ -+static inline unsigned int div_round_ticks(unsigned int val, unsigned int tick_duration, -+ unsigned int min_ticks) -+{ -+ return max(min_ticks, DIV_ROUND_UP(val, tick_duration)); -+} -+ -+static int otto_wdt_determine_timeouts(struct watchdog_device *wdev, unsigned int timeout, -+ unsigned int pretimeout) -+{ -+ struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); -+ unsigned int pretimeout_ms = pretimeout * 1000; -+ unsigned int timeout_ms = timeout * 1000; -+ unsigned int prescale_next = 0; -+ unsigned int phase1_ticks; -+ unsigned int phase2_ticks; -+ unsigned int total_ticks; -+ unsigned int prescale; -+ unsigned int tick_ms; -+ u32 v; -+ -+ do { -+ prescale = prescale_next; -+ if (prescale > OTTO_WDT_PRESCALE_MAX) -+ return -EINVAL; -+ -+ tick_ms = otto_wdt_tick_ms(ctrl, prescale); -+ total_ticks = div_round_ticks(timeout_ms, tick_ms, 2); -+ phase1_ticks = div_round_ticks(timeout_ms - pretimeout_ms, tick_ms, 1); -+ phase2_ticks = total_ticks - phase1_ticks; -+ -+ prescale_next++; -+ } while (phase1_ticks > OTTO_WDT_PHASE_TICKS_MAX -+ || phase2_ticks > OTTO_WDT_PHASE_TICKS_MAX); -+ -+ v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL); -+ -+ v &= ~(OTTO_WDT_CTRL_PRESCALE | OTTO_WDT_CTRL_PHASE1 | OTTO_WDT_CTRL_PHASE2); -+ v |= FIELD_PREP(OTTO_WDT_CTRL_PHASE1, phase1_ticks - 1); -+ v |= FIELD_PREP(OTTO_WDT_CTRL_PHASE2, phase2_ticks - 1); -+ v |= FIELD_PREP(OTTO_WDT_CTRL_PRESCALE, prescale); -+ -+ iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); -+ -+ timeout_ms = total_ticks * tick_ms; -+ ctrl->wdev.timeout = timeout_ms / 1000; -+ -+ pretimeout_ms = phase2_ticks * tick_ms; -+ ctrl->wdev.pretimeout = pretimeout_ms / 1000; -+ -+ return 0; -+} -+ -+static int otto_wdt_set_timeout(struct watchdog_device *wdev, unsigned int val) -+{ -+ return otto_wdt_determine_timeouts(wdev, val, min(wdev->pretimeout, val - 1)); -+} -+ -+static int otto_wdt_set_pretimeout(struct watchdog_device *wdev, unsigned int val) -+{ -+ return otto_wdt_determine_timeouts(wdev, wdev->timeout, val); -+} -+ -+static int otto_wdt_restart(struct watchdog_device *wdev, unsigned long reboot_mode, -+ void *data) -+{ -+ struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev); -+ u32 reset_mode; -+ u32 v; -+ -+ disable_irq(ctrl->irq_phase1); -+ -+ switch (reboot_mode) { -+ case REBOOT_SOFT: -+ reset_mode = OTTO_WDT_MODE_SOFTWARE; -+ break; -+ case REBOOT_WARM: -+ reset_mode = OTTO_WDT_MODE_CPU; -+ break; -+ default: -+ reset_mode = OTTO_WDT_MODE_SOC; -+ break; -+ } -+ -+ /* Configure for shortest timeout and wait for reset to occur */ -+ v = FIELD_PREP(OTTO_WDT_CTRL_RST_MODE, reset_mode) | OTTO_WDT_CTRL_ENABLE; -+ iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); -+ -+ mdelay(3 * otto_wdt_tick_ms(ctrl, 0)); -+ -+ return 0; -+} -+ -+static irqreturn_t otto_wdt_phase1_isr(int irq, void *dev_id) -+{ -+ struct otto_wdt_ctrl *ctrl = dev_id; -+ -+ iowrite32(OTTO_WDT_INTR_PHASE_1, ctrl->base + OTTO_WDT_REG_INTR); -+ dev_crit(ctrl->dev, "phase 1 timeout\n"); -+ watchdog_notify_pretimeout(&ctrl->wdev); -+ -+ return IRQ_HANDLED; -+} -+ -+static const struct watchdog_ops otto_wdt_ops = { -+ .owner = THIS_MODULE, -+ .start = otto_wdt_start, -+ .stop = otto_wdt_stop, -+ .ping = otto_wdt_ping, -+ .set_timeout = otto_wdt_set_timeout, -+ .set_pretimeout = otto_wdt_set_pretimeout, -+ .restart = otto_wdt_restart, -+}; -+ -+static const struct watchdog_info otto_wdt_info = { -+ .identity = "Realtek Otto watchdog timer", -+ .options = WDIOF_KEEPALIVEPING | -+ WDIOF_MAGICCLOSE | -+ WDIOF_SETTIMEOUT | -+ WDIOF_PRETIMEOUT, -+}; -+ -+static void otto_wdt_clock_action(void *data) -+{ -+ clk_disable_unprepare(data); -+} -+ -+static int otto_wdt_probe_clk(struct otto_wdt_ctrl *ctrl) -+{ -+ struct clk *clk = devm_clk_get(ctrl->dev, NULL); -+ int ret; -+ -+ if (IS_ERR(clk)) -+ return dev_err_probe(ctrl->dev, PTR_ERR(clk), "Failed to get clock\n"); -+ -+ ret = clk_prepare_enable(clk); -+ if (ret) -+ return dev_err_probe(ctrl->dev, ret, "Failed to enable clock\n"); -+ -+ ret = devm_add_action_or_reset(ctrl->dev, otto_wdt_clock_action, clk); -+ if (ret) -+ return ret; -+ -+ ctrl->clk_rate_khz = clk_get_rate(clk) / 1000; -+ if (ctrl->clk_rate_khz == 0) -+ return dev_err_probe(ctrl->dev, -ENXIO, "Failed to get clock rate\n"); -+ -+ return 0; -+} -+ -+static int otto_wdt_probe_reset_mode(struct otto_wdt_ctrl *ctrl) -+{ -+ static const char *mode_property = "realtek,reset-mode"; -+ const struct fwnode_handle *node = ctrl->dev->fwnode; -+ int mode_count; -+ u32 mode; -+ u32 v; -+ -+ if (!node) -+ return -ENXIO; -+ -+ mode_count = fwnode_property_string_array_count(node, mode_property); -+ if (mode_count < 0) -+ return mode_count; -+ else if (mode_count == 0) -+ return 0; -+ else if (mode_count != 1) -+ return -EINVAL; -+ -+ if (fwnode_property_match_string(node, mode_property, "soc") == 0) -+ mode = OTTO_WDT_MODE_SOC; -+ else if (fwnode_property_match_string(node, mode_property, "cpu") == 0) -+ mode = OTTO_WDT_MODE_CPU; -+ else if (fwnode_property_match_string(node, mode_property, "software") == 0) -+ mode = OTTO_WDT_MODE_SOFTWARE; -+ else -+ return -EINVAL; -+ -+ v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL); -+ v &= ~OTTO_WDT_CTRL_RST_MODE; -+ v |= FIELD_PREP(OTTO_WDT_CTRL_RST_MODE, mode); -+ iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL); -+ -+ return 0; -+} -+ -+static int otto_wdt_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct otto_wdt_ctrl *ctrl; -+ unsigned int max_tick_ms; -+ int ret; -+ -+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); -+ if (!ctrl) -+ return -ENOMEM; -+ -+ ctrl->dev = dev; -+ ctrl->base = devm_platform_ioremap_resource(pdev, 0); -+ if (IS_ERR(ctrl->base)) -+ return PTR_ERR(ctrl->base); -+ -+ /* Clear any old interrupts and reset initial state */ -+ iowrite32(OTTO_WDT_INTR_PHASE_1 | OTTO_WDT_INTR_PHASE_2, -+ ctrl->base + OTTO_WDT_REG_INTR); -+ iowrite32(OTTO_WDT_CTRL_DEFAULT, ctrl->base + OTTO_WDT_REG_CTRL); -+ -+ ret = otto_wdt_probe_clk(ctrl); -+ if (ret) -+ return ret; -+ -+ ctrl->irq_phase1 = platform_get_irq_byname(pdev, "phase1"); -+ if (ctrl->irq_phase1 < 0) -+ return ctrl->irq_phase1; -+ -+ ret = devm_request_irq(dev, ctrl->irq_phase1, otto_wdt_phase1_isr, 0, -+ "realtek-otto-wdt", ctrl); -+ if (ret) -+ return dev_err_probe(dev, ret, "Failed to get IRQ for phase1\n"); -+ -+ ret = otto_wdt_probe_reset_mode(ctrl); -+ if (ret) -+ return dev_err_probe(dev, ret, "Invalid reset mode specified\n"); -+ -+ ctrl->wdev.parent = dev; -+ ctrl->wdev.info = &otto_wdt_info; -+ ctrl->wdev.ops = &otto_wdt_ops; -+ -+ /* -+ * Since pretimeout cannot be disabled, min. timeout is twice the -+ * subsystem resolution. Max. timeout is ca. 43s at a bus clock of 200MHz. -+ */ -+ ctrl->wdev.min_timeout = 2; -+ max_tick_ms = otto_wdt_tick_ms(ctrl, OTTO_WDT_PRESCALE_MAX); -+ ctrl->wdev.max_hw_heartbeat_ms = max_tick_ms * OTTO_WDT_TIMEOUT_TICKS_MAX; -+ ctrl->wdev.timeout = min(30U, ctrl->wdev.max_hw_heartbeat_ms / 1000); -+ -+ watchdog_set_drvdata(&ctrl->wdev, ctrl); -+ watchdog_init_timeout(&ctrl->wdev, 0, dev); -+ watchdog_stop_on_reboot(&ctrl->wdev); -+ watchdog_set_restart_priority(&ctrl->wdev, 128); -+ -+ ret = otto_wdt_determine_timeouts(&ctrl->wdev, ctrl->wdev.timeout, 1); -+ if (ret) -+ return dev_err_probe(dev, ret, "Failed to set timeout\n"); -+ -+ return devm_watchdog_register_device(dev, &ctrl->wdev); -+} -+ -+static const struct of_device_id otto_wdt_ids[] = { -+ { .compatible = "realtek,rtl8380-wdt" }, -+ { .compatible = "realtek,rtl8390-wdt" }, -+ { .compatible = "realtek,rtl9300-wdt" }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, otto_wdt_ids); -+ -+static struct platform_driver otto_wdt_driver = { -+ .probe = otto_wdt_probe, -+ .driver = { -+ .name = "realtek-otto-watchdog", -+ .of_match_table = otto_wdt_ids, -+ }, -+}; -+module_platform_driver(otto_wdt_driver); -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Sander Vanheule "); -+MODULE_DESCRIPTION("Realtek Otto watchdog timer driver"); diff --git a/target/linux/realtek/patches-5.15/020-v5.17-net-mdio-add-helpers-to-extract-clause-45-regad-and-.patch b/target/linux/realtek/patches-5.15/020-v5.17-net-mdio-add-helpers-to-extract-clause-45-regad-and-.patch deleted file mode 100644 index da33aaa72f..0000000000 --- a/target/linux/realtek/patches-5.15/020-v5.17-net-mdio-add-helpers-to-extract-clause-45-regad-and-.patch +++ /dev/null @@ -1,53 +0,0 @@ -From c6af53f038aa32cec12e8a305ba07c7ef168f1b0 Mon Sep 17 00:00:00 2001 -From: "Russell King (Oracle)" -Date: Tue, 4 Jan 2022 12:07:00 +0000 -Subject: [PATCH 2/3] net: mdio: add helpers to extract clause 45 regad and - devad fields - -Add a couple of helpers and definitions to extract the clause 45 regad -and devad fields from the regnum passed into MDIO drivers. - -Tested-by: Daniel Golle -Reviewed-by: Andrew Lunn -Signed-off-by: Russell King (Oracle) -Signed-off-by: Daniel Golle -Signed-off-by: David S. Miller ---- - include/linux/mdio.h | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/include/linux/mdio.h -+++ b/include/linux/mdio.h -@@ -7,6 +7,7 @@ - #define __LINUX_MDIO_H__ - - #include -+#include - #include - - /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit -@@ -14,6 +15,7 @@ - */ - #define MII_ADDR_C45 (1<<30) - #define MII_DEVADDR_C45_SHIFT 16 -+#define MII_DEVADDR_C45_MASK GENMASK(20, 16) - #define MII_REGADDR_C45_MASK GENMASK(15, 0) - - struct gpio_desc; -@@ -355,6 +357,16 @@ static inline u32 mdiobus_c45_addr(int d - return MII_ADDR_C45 | devad << MII_DEVADDR_C45_SHIFT | regnum; - } - -+static inline u16 mdiobus_c45_regad(u32 regnum) -+{ -+ return FIELD_GET(MII_REGADDR_C45_MASK, regnum); -+} -+ -+static inline u16 mdiobus_c45_devad(u32 regnum) -+{ -+ return FIELD_GET(MII_DEVADDR_C45_MASK, regnum); -+} -+ - static inline int __mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad, - u16 regnum) - { diff --git a/target/linux/realtek/patches-5.15/021-v5.19-02-gpio-realtek-otto-Support-reversed-port-layouts.patch b/target/linux/realtek/patches-5.15/021-v5.19-02-gpio-realtek-otto-Support-reversed-port-layouts.patch deleted file mode 100644 index 437e7862d9..0000000000 --- a/target/linux/realtek/patches-5.15/021-v5.19-02-gpio-realtek-otto-Support-reversed-port-layouts.patch +++ /dev/null @@ -1,123 +0,0 @@ -From 512c5be35223d9baa2629efa1084cf5210eaee80 Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Sat, 9 Apr 2022 21:55:47 +0200 -Subject: [PATCH 2/6] gpio: realtek-otto: Support reversed port layouts - -The GPIO port layout on the RTL930x SoC series is reversed compared to -the RTL838x and RTL839x SoC series. Add new port offset calculator -functions to ensure the correct order is used when reading port IRQ -data, and ensure bgpio uses the right byte ordering. - -Signed-off-by: Sander Vanheule -Signed-off-by: Bartosz Golaszewski ---- - drivers/gpio/gpio-realtek-otto.c | 55 +++++++++++++++++++++++++++++--- - 1 file changed, 51 insertions(+), 4 deletions(-) - ---- a/drivers/gpio/gpio-realtek-otto.c -+++ b/drivers/gpio/gpio-realtek-otto.c -@@ -58,6 +58,8 @@ struct realtek_gpio_ctrl { - raw_spinlock_t lock; - u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK]; - u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK]; -+ unsigned int (*port_offset_u8)(unsigned int port); -+ unsigned int (*port_offset_u16)(unsigned int port); - }; - - /* Expand with more flags as devices with other quirks are added */ -@@ -69,6 +71,11 @@ enum realtek_gpio_flags { - * line the IRQ handler was assigned to, causing uncaught interrupts. - */ - GPIO_INTERRUPTS_DISABLED = BIT(0), -+ /* -+ * Port order is reversed, meaning DCBA register layout for 1-bit -+ * fields, and [BA, DC] for 2-bit fields. -+ */ -+ GPIO_PORTS_REVERSED = BIT(1), - }; - - static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data) -@@ -86,21 +93,50 @@ static struct realtek_gpio_ctrl *irq_dat - * port. The two interrupt mask registers store two bits per GPIO, so use u16 - * values. - */ -+static unsigned int realtek_gpio_port_offset_u8(unsigned int port) -+{ -+ return port; -+} -+ -+static unsigned int realtek_gpio_port_offset_u16(unsigned int port) -+{ -+ return 2 * port; -+} -+ -+/* -+ * Reversed port order register access -+ * -+ * For registers with one bit per GPIO, all ports are stored as u8-s in one -+ * register in reversed order. The two interrupt mask registers store two bits -+ * per GPIO, so use u16 values. The first register contains ports 1 and 0, the -+ * second ports 3 and 2. -+ */ -+static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port) -+{ -+ return 3 - port; -+} -+ -+static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port) -+{ -+ return 2 * (port ^ 1); -+} -+ - static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl, - unsigned int port, u16 irq_type, u16 irq_mask) - { -- iowrite16(irq_type & irq_mask, ctrl->base + REALTEK_GPIO_REG_IMR + 2 * port); -+ iowrite16(irq_type & irq_mask, -+ ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port)); - } - - static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, - unsigned int port, u8 mask) - { -- iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + port); -+ iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port)); - } - - static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port) - { -- return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + port); -+ return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port)); - } - - /* Set the rising and falling edge mask bits for a GPIO port pin */ -@@ -250,6 +286,7 @@ MODULE_DEVICE_TABLE(of, realtek_gpio_of_ - static int realtek_gpio_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -+ unsigned long bgpio_flags; - unsigned int dev_flags; - struct gpio_irq_chip *girq; - struct realtek_gpio_ctrl *ctrl; -@@ -277,10 +314,20 @@ static int realtek_gpio_probe(struct pla - - raw_spin_lock_init(&ctrl->lock); - -+ if (dev_flags & GPIO_PORTS_REVERSED) { -+ bgpio_flags = 0; -+ ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev; -+ ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev; -+ } else { -+ bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER; -+ ctrl->port_offset_u8 = realtek_gpio_port_offset_u8; -+ ctrl->port_offset_u16 = realtek_gpio_port_offset_u16; -+ } -+ - err = bgpio_init(&ctrl->gc, dev, 4, - ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL, - ctrl->base + REALTEK_GPIO_REG_DIR, NULL, -- BGPIOF_BIG_ENDIAN_BYTE_ORDER); -+ bgpio_flags); - if (err) { - dev_err(dev, "unable to init generic GPIO"); - return err; diff --git a/target/linux/realtek/patches-5.15/021-v5.19-03-gpio-realtek-otto-Support-per-cpu-interrupts.patch b/target/linux/realtek/patches-5.15/021-v5.19-03-gpio-realtek-otto-Support-per-cpu-interrupts.patch deleted file mode 100644 index b632095c36..0000000000 --- a/target/linux/realtek/patches-5.15/021-v5.19-03-gpio-realtek-otto-Support-per-cpu-interrupts.patch +++ /dev/null @@ -1,153 +0,0 @@ -From 95fa6dbe58f286a8f87cb37b7516232eb678de2d Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Sat, 9 Apr 2022 21:55:48 +0200 -Subject: [PATCH 3/6] gpio: realtek-otto: Support per-cpu interrupts - -On SoCs with multiple cores, it is possible that the GPIO interrupt -controller supports assigning specific pins to one or more cores. - -IRQ balancing can be performed on a line-by-line basis if the parent -interrupt is routed to all available cores, which is the default upon -initialisation. - -Signed-off-by: Sander Vanheule -Signed-off-by: Bartosz Golaszewski ---- - drivers/gpio/gpio-realtek-otto.c | 75 +++++++++++++++++++++++++++++++- - 1 file changed, 74 insertions(+), 1 deletion(-) - ---- a/drivers/gpio/gpio-realtek-otto.c -+++ b/drivers/gpio/gpio-realtek-otto.c -@@ -1,6 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0-only - - #include -+#include - #include - #include - #include -@@ -55,6 +56,8 @@ - struct realtek_gpio_ctrl { - struct gpio_chip gc; - void __iomem *base; -+ void __iomem *cpumask_base; -+ struct cpumask cpu_irq_maskable; - raw_spinlock_t lock; - u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK]; - u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK]; -@@ -76,6 +79,11 @@ enum realtek_gpio_flags { - * fields, and [BA, DC] for 2-bit fields. - */ - GPIO_PORTS_REVERSED = BIT(1), -+ /* -+ * Interrupts can be enabled per cpu. This requires a secondary IO -+ * range, where the per-cpu enable masks are located. -+ */ -+ GPIO_INTERRUPTS_PER_CPU = BIT(2), - }; - - static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data) -@@ -247,14 +255,61 @@ static void realtek_gpio_irq_handler(str - chained_irq_exit(irq_chip, desc); - } - -+static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, -+ unsigned int port, int cpu) -+{ -+ return ctrl->cpumask_base + ctrl->port_offset_u8(port) + -+ REALTEK_GPIO_PORTS_PER_BANK * cpu; -+} -+ -+static int realtek_gpio_irq_set_affinity(struct irq_data *data, -+ const struct cpumask *dest, bool force) -+{ -+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); -+ unsigned int line = irqd_to_hwirq(data); -+ unsigned int port = line / 8; -+ unsigned int port_pin = line % 8; -+ void __iomem *irq_cpu_mask; -+ unsigned long flags; -+ int cpu; -+ u8 v; -+ -+ if (!ctrl->cpumask_base) -+ return -ENXIO; -+ -+ raw_spin_lock_irqsave(&ctrl->lock, flags); -+ -+ for_each_cpu(cpu, &ctrl->cpu_irq_maskable) { -+ irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu); -+ v = ioread8(irq_cpu_mask); -+ -+ if (cpumask_test_cpu(cpu, dest)) -+ v |= BIT(port_pin); -+ else -+ v &= ~BIT(port_pin); -+ -+ iowrite8(v, irq_cpu_mask); -+ } -+ -+ raw_spin_unlock_irqrestore(&ctrl->lock, flags); -+ -+ irq_data_update_effective_affinity(data, dest); -+ -+ return 0; -+} -+ - static int realtek_gpio_irq_init(struct gpio_chip *gc) - { - struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc); - unsigned int port; -+ int cpu; - - for (port = 0; (port * 8) < gc->ngpio; port++) { - realtek_gpio_write_imr(ctrl, port, 0, 0); - realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0)); -+ -+ for_each_cpu(cpu, &ctrl->cpu_irq_maskable) -+ iowrite8(GENMASK(7, 0), realtek_gpio_irq_cpu_mask(ctrl, port, cpu)); - } - - return 0; -@@ -266,6 +321,7 @@ static struct irq_chip realtek_gpio_irq_ - .irq_mask = realtek_gpio_irq_mask, - .irq_unmask = realtek_gpio_irq_unmask, - .irq_set_type = realtek_gpio_irq_set_type, -+ .irq_set_affinity = realtek_gpio_irq_set_affinity, - }; - - static const struct of_device_id realtek_gpio_of_match[] = { -@@ -290,8 +346,10 @@ static int realtek_gpio_probe(struct pla - unsigned int dev_flags; - struct gpio_irq_chip *girq; - struct realtek_gpio_ctrl *ctrl; -+ struct resource *res; - u32 ngpios; -- int err, irq; -+ unsigned int nr_cpus; -+ int cpu, err, irq; - - ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL); - if (!ctrl) -@@ -352,6 +410,21 @@ static int realtek_gpio_probe(struct pla - girq->init_hw = realtek_gpio_irq_init; - } - -+ cpumask_clear(&ctrl->cpu_irq_maskable); -+ -+ if ((dev_flags & GPIO_INTERRUPTS_PER_CPU) && irq > 0) { -+ ctrl->cpumask_base = devm_platform_get_and_ioremap_resource(pdev, 1, &res); -+ if (IS_ERR(ctrl->cpumask_base)) -+ return dev_err_probe(dev, PTR_ERR(ctrl->cpumask_base), -+ "missing CPU IRQ mask registers"); -+ -+ nr_cpus = resource_size(res) / REALTEK_GPIO_PORTS_PER_BANK; -+ nr_cpus = min(nr_cpus, num_present_cpus()); -+ -+ for (cpu = 0; cpu < nr_cpus; cpu++) -+ cpumask_set_cpu(cpu, &ctrl->cpu_irq_maskable); -+ } -+ - return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl); - } - diff --git a/target/linux/realtek/patches-5.15/021-v5.19-04-gpio-realtek-otto-Add-RTL930x-support.patch b/target/linux/realtek/patches-5.15/021-v5.19-04-gpio-realtek-otto-Add-RTL930x-support.patch deleted file mode 100644 index 9b25803138..0000000000 --- a/target/linux/realtek/patches-5.15/021-v5.19-04-gpio-realtek-otto-Add-RTL930x-support.patch +++ /dev/null @@ -1,29 +0,0 @@ -From deaf1cecdeb052cdb5e92fd642016198724b44a4 Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Sat, 9 Apr 2022 21:55:49 +0200 -Subject: [PATCH 4/6] gpio: realtek-otto: Add RTL930x support - -The RTL930x SoC series has support for 24 GPIOs, with the port order -reversed compared to RTL838x and RTL839x. The RTL930x series also has -two CPUs (VPEs) and can distribute individual GPIO interrupts between -them. - -Signed-off-by: Sander Vanheule -Signed-off-by: Bartosz Golaszewski ---- - drivers/gpio/gpio-realtek-otto.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/gpio/gpio-realtek-otto.c -+++ b/drivers/gpio/gpio-realtek-otto.c -@@ -335,6 +335,10 @@ static const struct of_device_id realtek - { - .compatible = "realtek,rtl8390-gpio", - }, -+ { -+ .compatible = "realtek,rtl9300-gpio", -+ .data = (void *)(GPIO_PORTS_REVERSED | GPIO_INTERRUPTS_PER_CPU) -+ }, - {} - }; - MODULE_DEVICE_TABLE(of, realtek_gpio_of_match); diff --git a/target/linux/realtek/patches-5.15/021-v5.19-06-gpio-realtek-otto-Add-RTL931x-support.patch b/target/linux/realtek/patches-5.15/021-v5.19-06-gpio-realtek-otto-Add-RTL931x-support.patch deleted file mode 100644 index 810856eb89..0000000000 --- a/target/linux/realtek/patches-5.15/021-v5.19-06-gpio-realtek-otto-Add-RTL931x-support.patch +++ /dev/null @@ -1,30 +0,0 @@ -From d3bf3dc4bbbf6109bd9b4bd60089d36205ec4a37 Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Sat, 9 Apr 2022 21:55:51 +0200 -Subject: [PATCH 6/6] gpio: realtek-otto: Add RTL931x support - -The RTL931x SoC series has support for 32 GPIOs, although not all lines -may be broken out to a physical pad. - -The GPIO bank's parent interrupt can be routed to either or both of the -SoC's CPU cores by the GIC. Line-by-line IRQ balancing is not possible -on these SoCs. - -Signed-off-by: Sander Vanheule -Signed-off-by: Bartosz Golaszewski ---- - drivers/gpio/gpio-realtek-otto.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/gpio/gpio-realtek-otto.c -+++ b/drivers/gpio/gpio-realtek-otto.c -@@ -339,6 +339,9 @@ static const struct of_device_id realtek - .compatible = "realtek,rtl9300-gpio", - .data = (void *)(GPIO_PORTS_REVERSED | GPIO_INTERRUPTS_PER_CPU) - }, -+ { -+ .compatible = "realtek,rtl9310-gpio", -+ }, - {} - }; - MODULE_DEVICE_TABLE(of, realtek_gpio_of_match); diff --git a/target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch b/target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch deleted file mode 100644 index eaeea0991d..0000000000 --- a/target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch +++ /dev/null @@ -1,86 +0,0 @@ -From fce11f68491b46b93df69de0630cd9edb90bc772 Mon Sep 17 00:00:00 2001 -From: Birger Koblitz -Date: Wed, 29 Dec 2021 21:54:21 +0100 -Subject: [PATCH] realtek: Create 4 different Realtek Platforms - -Creates RTL83XX as a basic kernel config parameter for the -RTL838X, RTL839x, RTL930X and RTL931X platforms with respective -configurations for the SoCs, which are introduced in addition. - -Submitted-by: Birger Koblitz ---- - arch/mips/Kbuild.platforms | 1 + - arch/mips/Kconfig | 57 ++++++++++++++ - 2 files changed, 58 insertions(+) - ---- a/arch/mips/Kbuild.platforms -+++ b/arch/mips/Kbuild.platforms -@@ -23,6 +23,7 @@ platform-$(CONFIG_NLM_COMMON) += netlog - platform-$(CONFIG_PIC32MZDA) += pic32/ - platform-$(CONFIG_RALINK) += ralink/ - platform-$(CONFIG_MIKROTIK_RB532) += rb532/ -+platform-$(CONFIG_RTL83XX) += rtl838x/ - platform-$(CONFIG_SGI_IP22) += sgi-ip22/ - platform-$(CONFIG_SGI_IP27) += sgi-ip27/ - platform-$(CONFIG_SGI_IP28) += sgi-ip22/ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -1056,8 +1056,58 @@ config NLM_XLP_BOARD - This board is based on Netlogic XLP Processor. - Say Y here if you have a XLP based board. - -+config RTL83XX -+ bool "Realtek based platforms" -+ select DMA_NONCOHERENT -+ select IRQ_MIPS_CPU -+ select NO_EXCEPT_FILL -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_MIPS16 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_HAS_EARLY_PRINTK_8250 -+ select USE_GENERIC_EARLY_PRINTK_8250 -+ select BOOT_RAW -+ select PINCTRL -+ select ARCH_HAS_RESET_CONTROLLER -+ select RESET_CONTROLLER -+ select USE_OF -+ - endchoice - -+config RTL838X -+ bool "Realtek RTL838X based platforms" -+ depends on RTL83XX -+ select CPU_SUPPORTS_CPUFREQ -+ select MIPS_EXTERNAL_TIMER -+ -+config RTL839X -+ bool "Realtek RTL839X based platforms" -+ depends on RTL83XX -+ select CPU_SUPPORTS_CPUFREQ -+ select MIPS_EXTERNAL_TIMER -+ select SYS_SUPPORTS_MULTITHREADING -+ -+config RTL930X -+ bool "Realtek RTL930X based platforms" -+ depends on RTL83XX -+ select MIPS_CPU_SCACHE -+ select MIPS_EXTERNAL_TIMER -+ select SYS_SUPPORTS_MULTITHREADING -+ -+config RTL931X -+ bool "Realtek RTL931X based platforms" -+ depends on RTL930X -+ select MIPS_GIC -+ select COMMON_CLK -+ select CLKSRC_MIPS_GIC -+ select SYS_SUPPORTS_VPE_LOADER -+ select SYS_SUPPORTS_SMP -+ select SYS_SUPPORTS_MIPS_CPS -+ - source "arch/mips/alchemy/Kconfig" - source "arch/mips/ath25/Kconfig" - source "arch/mips/ath79/Kconfig" diff --git a/target/linux/realtek/patches-5.15/301-gpio-add-rtl8231-driver.patch b/target/linux/realtek/patches-5.15/301-gpio-add-rtl8231-driver.patch deleted file mode 100644 index 7603a03744..0000000000 --- a/target/linux/realtek/patches-5.15/301-gpio-add-rtl8231-driver.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 26 Nov 2020 12:02:21 +0100 -Subject: [PATCH] realtek: update the tree to the latest refactored version -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -* rename the target to realtek -* add refactored DSA driver -* add latest gpio driver -* lots of arch cleanups -* new irq driver -* additional boards - -Submitted-by: Bert Vermeulen -Submitted-by: Birger Koblitz -Submitted-by: Sander Vanheule -Submitted-by: Bjørn Mork -Submitted-by: John Crispin ---- - drivers/gpio/Kconfig | 6 ++++++ - drivers/gpio/Makefile | 1 + - 2 files changed, 7 insertions(+) - ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -529,6 +529,12 @@ config GPIO_ROCKCHIP - help - Say yes here to support GPIO on Rockchip SoCs. - -+config GPIO_RTL8231 -+ tristate "RTL8231 GPIO" -+ depends on RTL83XX -+ help -+ Say yes here to support Realtek RTL8231 GPIO expansion chips. -+ - config GPIO_SAMA5D2_PIOBU - tristate "SAMA5D2 PIOBU GPIO support" - depends on MFD_SYSCON ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -129,6 +129,7 @@ obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc3 - obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o - obj-$(CONFIG_GPIO_REG) += gpio-reg.o - obj-$(CONFIG_GPIO_ROCKCHIP) += gpio-rockchip.o -+obj-$(CONFIG_GPIO_RTL8231) += gpio-rtl8231.o - obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o - obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o - obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o diff --git a/target/linux/realtek/patches-5.15/302-clocksource-add-otto-driver.patch b/target/linux/realtek/patches-5.15/302-clocksource-add-otto-driver.patch deleted file mode 100644 index 63a5050ebb..0000000000 --- a/target/linux/realtek/patches-5.15/302-clocksource-add-otto-driver.patch +++ /dev/null @@ -1,93 +0,0 @@ -From 3cc8011171186d906c547bc6f0c1f8e350edc7cf Mon Sep 17 00:00:00 2001 -From: Markus Stockhausen -Date: Mon, 3 Oct 2022 14:45:21 +0200 -Subject: [PATCH] realtek: resurrect timer driver - -Now that we provide a clock driver for the Reltek SOCs the CPU frequency might -change on demand. This has direct visible effects during operation - -- the CEVT 4K timer is no longer a stable clocksource -- after CPU frequencies changes time calculation works wrong -- sched_clock falls back to kernel default interval (100 Hz) -- timestamps in dmesg have only 2 digits left - -[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps ... -[ 0.060000] pid_max: default: 32768 minimum: 301 -[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) -[ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) -[ 0.080000] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build -[ 0.090000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ... - -Looking around where we can start the CEVT timer for RTL930X is a good basis. -Initially it was developed as a clocksource driver for the broken timer in that -specific SOC series. Afterwards it was shifted around to the CEVT location, -got SMP enablement and lost its clocksource feature. So we at least have -something to copy from. As the timers on these devices are well understood -the implementation follows this way: - -- leave the RTL930X implementation as is -- provide a new driver for RTL83XX devices only -- swap RTL930X driver at a later time - -Like the clock driver this patch contains a self contained module that is SOC -independet and already provides full support for the RTL838X, RTL839X and -RTL930X devices. Some of the new (or reestablished) features are: - -- simplified initialization routines -- SMP setup with CPU hotplug framework -- derived from LXB clock speed -- supplied clocksource -- dedicated register functions for better readability -- documentation about some caveats - -Signed-off-by: Markus Stockhausen -[remove unused header includes, remove old CONFIG_MIPS dependency, add -REALTEK_ prefix to driver symbol] -Signed-off-by: Sander Vanheule - ---- - drivers/clocksource/Kconfig | 12 +++ - drivers/clocksource/Makefile | 1 + - include/linux/cpuhotplug.h | 1 + - 3 files changed, 14 insertions(+) - ---- a/drivers/clocksource/Kconfig -+++ b/drivers/clocksource/Kconfig -@@ -127,6 +127,17 @@ config RDA_TIMER - help - Enables the support for the RDA Micro timer driver. - -+config REALTEK_OTTO_TIMER -+ bool "Clocksource/timer for the Realtek Otto platform" -+ select COMMON_CLK -+ select TIMER_OF -+ help -+ This driver adds support for the timers found in the Realtek RTL83xx -+ and RTL93xx SoCs series. This includes chips such as RTL8380, RTL8381 -+ and RTL832, as well as chips from the RTL839x series, such as RTL8390 -+ RT8391, RTL8392, RTL8393 and RTL8396 and chips of the RTL930x series -+ such as RTL9301, RTL9302 or RTL9303. -+ - config SUN4I_TIMER - bool "Sun4i timer driver" if COMPILE_TEST - depends on HAS_IOMEM ---- a/drivers/clocksource/Makefile -+++ b/drivers/clocksource/Makefile -@@ -58,6 +58,7 @@ obj-$(CONFIG_MILBEAUT_TIMER) += timer-mi - obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o - obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o - obj-$(CONFIG_RDA_TIMER) += timer-rda.o -+obj-$(CONFIG_REALTEK_OTTO_TIMER) += timer-rtl-otto.o - - obj-$(CONFIG_ARC_TIMERS) += arc_timer.o - obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o ---- a/include/linux/cpuhotplug.h -+++ b/include/linux/cpuhotplug.h -@@ -176,6 +176,7 @@ enum cpuhp_state { - CPUHP_AP_MARCO_TIMER_STARTING, - CPUHP_AP_MIPS_GIC_TIMER_STARTING, - CPUHP_AP_ARC_TIMER_STARTING, -+ CPUHP_AP_REALTEK_TIMER_STARTING, - CPUHP_AP_RISCV_TIMER_STARTING, - CPUHP_AP_CLINT_TIMER_STARTING, - CPUHP_AP_CSKY_TIMER_STARTING, diff --git a/target/linux/realtek/patches-5.15/303-gpio-update-dependencies-for-gpio-realtek-otto.patch b/target/linux/realtek/patches-5.15/303-gpio-update-dependencies-for-gpio-realtek-otto.patch deleted file mode 100644 index beaddcb58e..0000000000 --- a/target/linux/realtek/patches-5.15/303-gpio-update-dependencies-for-gpio-realtek-otto.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 9bac1c20b8f39f2e0e342b087add5093b94feaed Mon Sep 17 00:00:00 2001 -From: INAGAKI Hiroshi -Date: Wed, 5 May 2021 22:05:39 +0900 -Subject: realtek: backport gpio-realtek-otto driver from 5.13 to 5.10 - -This patch backports "gpio-realtek-otto" driver to Kernel 5.10. -"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" -is used in OpenWrt, so update the dependency by the additional patch. - -Submitted-by: INAGAKI Hiroshi ---- - drivers/gpio/Kconfig | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -503,8 +503,8 @@ config GPIO_RDA - - config GPIO_REALTEK_OTTO - tristate "Realtek Otto GPIO support" -- depends on MACH_REALTEK_RTL -- default MACH_REALTEK_RTL -+ depends on RTL83XX -+ default RTL838X - select GPIO_GENERIC - select GPIOLIB_IRQCHIP - help diff --git a/target/linux/realtek/patches-5.15/304-spi-update-dependency-for-spi-realtek-rtl.patch b/target/linux/realtek/patches-5.15/304-spi-update-dependency-for-spi-realtek-rtl.patch deleted file mode 100644 index f2b57bacde..0000000000 --- a/target/linux/realtek/patches-5.15/304-spi-update-dependency-for-spi-realtek-rtl.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 0b000cbfe0aa0323bffa855ef8449c0687a4c071 Mon Sep 17 00:00:00 2001 -From: INAGAKI Hiroshi -Date: Thu, 6 May 2021 19:30:58 +0900 -Subject: realtek: backport spi-realtek-rtl driver from 5.12 to 5.10 - -This patch backports "spi-realtek-rtl" driver to Kernel 5.10 from 5.12. -"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" -is used in OpenWrt, so update the dependency by the additional patch. - -Submitted-by: INAGAKI Hiroshi ---- - drivers/spi/Makefile | 2 +- - 1 files changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -97,7 +97,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o - obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o - obj-$(CONFIG_SPI_ROCKCHIP_SFC) += spi-rockchip-sfc.o - obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o --obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o -+obj-$(CONFIG_RTL83XX) += spi-realtek-rtl.o - obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o - obj-$(CONFIG_SPI_RSPI) += spi-rspi.o - obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o diff --git a/target/linux/realtek/patches-5.15/305-irqchip-update-dependency-for-irq-realtek-rtl.patch b/target/linux/realtek/patches-5.15/305-irqchip-update-dependency-for-irq-realtek-rtl.patch deleted file mode 100644 index a94a3ff8ac..0000000000 --- a/target/linux/realtek/patches-5.15/305-irqchip-update-dependency-for-irq-realtek-rtl.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 2cd00b51470a30198b048a5fca48a04db77e29cc Mon Sep 17 00:00:00 2001 -From: INAGAKI Hiroshi -Date: Fri, 21 May 2021 23:16:37 +0900 -Subject: [PATCH] realtek: backport irq-realtek-rtl driver from 5.12 to 5.10 - -This patch backports "irq-realtek-rtl" driver to Kernel 5.10 from 5.12. -"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" -is used in OpenWrt, so update the dependency by the additional patch. - -Submitted-by: INAGAKI Hiroshi ---- - drivers/irqchip/Makefile | 2 +- - 1 files changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/irqchip/Makefile -+++ b/drivers/irqchip/Makefile -@@ -112,7 +112,7 @@ obj-$(CONFIG_LOONGSON_PCH_PIC) += irq-l - obj-$(CONFIG_LOONGSON_PCH_MSI) += irq-loongson-pch-msi.o - obj-$(CONFIG_MST_IRQ) += irq-mst-intc.o - obj-$(CONFIG_SL28CPLD_INTC) += irq-sl28cpld.o --obj-$(CONFIG_MACH_REALTEK_RTL) += irq-realtek-rtl.o -+obj-$(CONFIG_RTL83XX) += irq-realtek-rtl.o - obj-$(CONFIG_WPCM450_AIC) += irq-wpcm450-aic.o - obj-$(CONFIG_IRQ_IDT3243X) += irq-idt3243x.o - obj-$(CONFIG_APPLE_AIC) += irq-apple-aic.o diff --git a/target/linux/realtek/patches-5.15/307-wdt-update-dependency-for-realtek-otto-wdt.patch b/target/linux/realtek/patches-5.15/307-wdt-update-dependency-for-realtek-otto-wdt.patch deleted file mode 100644 index b44aebea12..0000000000 --- a/target/linux/realtek/patches-5.15/307-wdt-update-dependency-for-realtek-otto-wdt.patch +++ /dev/null @@ -1,32 +0,0 @@ -From b8fc5eecdc5d33cf261986436597b5482ab856da Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Sun, 14 Nov 2021 19:45:32 +0100 -Subject: [PATCH] realtek: Backport Realtek Otto WDT driver - -Add patch submitted upstream to linux-watchdog and replace the MIPS -architecture symbols. Requires one extra patch for the DIV_ROUND_* -macros, which have moved to a different header since 5.10. - -Submitted-by: Sander Vanheule -Tested-by: Stijn Segers -Tested-by: Paul Fertser -Tested-by: Stijn Tintel ---- - drivers/watchdog/Kconfig | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -956,10 +956,10 @@ config RTD119X_WATCHDOG - - config REALTEK_OTTO_WDT - tristate "Realtek Otto MIPS watchdog support" -- depends on MACH_REALTEK_RTL || COMPILE_TEST -+ depends on RTL83XX - depends on COMMON_CLK - select WATCHDOG_CORE -- default MACH_REALTEK_RTL -+ default RTL83XX - help - Say Y here to include support for the watchdog timer on Realtek - RTL838x, RTL839x, RTL930x SoCs. This watchdog has pretimeout diff --git a/target/linux/realtek/patches-5.15/308-otto-wdt-fix-missing-math-header.patch b/target/linux/realtek/patches-5.15/308-otto-wdt-fix-missing-math-header.patch deleted file mode 100644 index 78b145617f..0000000000 --- a/target/linux/realtek/patches-5.15/308-otto-wdt-fix-missing-math-header.patch +++ /dev/null @@ -1,28 +0,0 @@ -From b8fc5eecdc5d33cf261986436597b5482ab856da Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Sun, 14 Nov 2021 19:45:32 +0100 -Subject: [PATCH] realtek: Backport Realtek Otto WDT driver - -Add patch submitted upstream to linux-watchdog and replace the MIPS -architecture symbols. Requires one extra patch for the DIV_ROUND_* -macros, which have moved to a different header since 5.10. - -Submitted-by: Sander Vanheule -Tested-by: Stijn Segers -Tested-by: Paul Fertser -Tested-by: Stijn Tintel ---- - drivers/watchdog/realtek_otto_wdt.c | 2 +- - 1 files changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/watchdog/realtek_otto_wdt.c -+++ b/drivers/watchdog/realtek_otto_wdt.c -@@ -21,7 +21,7 @@ - #include - #include - #include --#include -+#include - #include - #include - #include diff --git a/target/linux/realtek/patches-5.15/310-add-i2c-rtl9300-support.patch b/target/linux/realtek/patches-5.15/310-add-i2c-rtl9300-support.patch deleted file mode 100644 index 2125aea77f..0000000000 --- a/target/linux/realtek/patches-5.15/310-add-i2c-rtl9300-support.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 63a0a4d85bc900464c5b046b13808a582345f8c8 Mon Sep 17 00:00:00 2001 -From: Birger Koblitz -Date: Sat, 11 Dec 2021 20:14:47 +0100 -Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C controller - -This adds support for the RTL9300 and RTL9310 I2C controller. -The controller implements the SMBus protocol for SMBus transfers -over an I2C bus. The driver supports selecting one of the 2 possible -SCL pins and any of the 8 possible SDA pins. Bus speeds of -100kHz (standard speed) and 400kHz (high speed I2C) are supported. - -Submitted-by: Birger Koblitz ---- - drivers/i2c/busses/Kconfig | 10 +++++++++ - drivers/i2c/busses/Makefile | 1 + - 2 files changed, 11 insertions(+) - ---- a/drivers/i2c/busses/Kconfig -+++ b/drivers/i2c/busses/Kconfig -@@ -949,6 +949,16 @@ config I2C_RK3X - This driver can also be built as a module. If so, the module will - be called i2c-rk3x. - -+config I2C_RTL9300 -+ tristate "Realtek RTL9300 I2C adapter" -+ depends on OF -+ help -+ Say Y here to include support for the I2C adapter in Realtek RTL9300 -+ and RTL9310 SoCs. -+ -+ This driver can also be built as a module. If so, the module will -+ be called i2c-rtl9300. -+ - config HAVE_S3C2410_I2C - bool - help ---- a/drivers/i2c/busses/Makefile -+++ b/drivers/i2c/busses/Makefile -@@ -94,6 +94,7 @@ obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom- - obj-$(CONFIG_I2C_QUP) += i2c-qup.o - obj-$(CONFIG_I2C_RIIC) += i2c-riic.o - obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o -+obj-$(CONFIG_I2C_RTL9300) += i2c-rtl9300.o - obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o - obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o - obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o diff --git a/target/linux/realtek/patches-5.15/311-add-i2c-mux-rtl9300-support.patch b/target/linux/realtek/patches-5.15/311-add-i2c-mux-rtl9300-support.patch deleted file mode 100644 index d0bfba4538..0000000000 --- a/target/linux/realtek/patches-5.15/311-add-i2c-mux-rtl9300-support.patch +++ /dev/null @@ -1,46 +0,0 @@ -From f4bdb7fdccdfe3fa382abe77f72a16c2f2e6add0 Mon Sep 17 00:00:00 2001 -From: Birger Koblitz -Date: Sat, 11 Dec 2021 20:25:37 +0100 -Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C multiplexing - -The RTL9300/RTL9310 I2C controllers have support for 2 independent I2C -masters, each with a fixed SCL pin, that cannot be changed. Each of these -masters can use 8 (RTL9300) or 16 (RTL9310) different pins for SDA. -This multiplexer directly controls the two masters and their shared -IO configuration registers to allow multiplexing between any of these -busses. The two masters cannot be used in parallel as the multiplex -is protected by a standard multiplex lock. - -Submitted-by: Birger Koblitz ---- - drivers/i2c/muxes/Kconfig | 9 +++++++ - drivers/i2c/muxes/Makefile | 1 + - 2 files changed, 10 insertions(+) - ---- a/drivers/i2c/muxes/Kconfig -+++ b/drivers/i2c/muxes/Kconfig -@@ -99,6 +99,15 @@ config I2C_MUX_REG - This driver can also be built as a module. If so, the module - will be called i2c-mux-reg. - -+config I2C_MUX_RTL9300 -+ tristate "RTL9300 based I2C multiplexer" -+ help -+ If you say yes to this option, support will be included for a -+ RTL9300 based I2C multiplexer. -+ -+ This driver can also be built as a module. If so, the module -+ will be called i2c-mux-reg. -+ - config I2C_DEMUX_PINCTRL - tristate "pinctrl-based I2C demultiplexer" - depends on PINCTRL && OF ---- a/drivers/i2c/muxes/Makefile -+++ b/drivers/i2c/muxes/Makefile -@@ -14,5 +14,6 @@ obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux - obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o - obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o - obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o -+obj-$(CONFIG_I2C_MUX_RTL9300) += i2c-mux-rtl9300.o - - ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG diff --git a/target/linux/realtek/patches-5.15/315-irqchip-irq-realtek-rtl-add-VPE-support.patch b/target/linux/realtek/patches-5.15/315-irqchip-irq-realtek-rtl-add-VPE-support.patch deleted file mode 100644 index 102c9850ce..0000000000 --- a/target/linux/realtek/patches-5.15/315-irqchip-irq-realtek-rtl-add-VPE-support.patch +++ /dev/null @@ -1,402 +0,0 @@ -From 6c18e9c491959ac0674ebe36b09f9ddc3f2c9bce Mon Sep 17 00:00:00 2001 -From: Birger Koblitz -Date: Fri, 31 Dec 2021 11:56:49 +0100 -Subject: [PATCH] realtek: Add VPE support for the IRQ driver - -In order to support VSMP, enable support for both VPEs -of the RTL839X and RTL930X SoCs in the irq-realtek-rtl -driver. Add support for IRQ affinity setting. - -Submitted-by: Birger Koblitz ---- - drivers/irqchip/irq-realtek-rtl.c | 152 +++++++++++++++--- - 1 file changed, 73 insertions(+), 76 deletions(-) - ---- a/drivers/irqchip/irq-realtek-rtl.c -+++ b/drivers/irqchip/irq-realtek-rtl.c -@@ -21,21 +21,63 @@ - #define RTL_ICTL_IRR2 0x10 - #define RTL_ICTL_IRR3 0x14 - --#define REG(x) (realtek_ictl_base + x) -+#define RTL_ICTL_NUM_INPUTS 32 -+#define RTL_ICTL_NUM_OUTPUTS 15 - - static DEFINE_RAW_SPINLOCK(irq_lock); --static void __iomem *realtek_ictl_base; -+ -+#define REG(offset, cpu) (realtek_ictl_base[cpu] + offset) -+ -+static void __iomem *realtek_ictl_base[NR_CPUS]; -+static cpumask_t realtek_ictl_cpu_configurable; -+ -+struct realtek_ictl_output { -+ /* IRQ controller data */ -+ struct fwnode_handle *fwnode; -+ /* Output specific data */ -+ unsigned int output_index; -+ struct irq_domain *domain; -+ u32 child_mask; -+}; -+ -+/* -+ * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering, -+ * placing IRQ 31 in the first four bits. A routing value of '0' means the -+ * interrupt is left disconnected. Routing values {1..15} connect to output -+ * lines {0..14}. -+ */ -+#define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32)) -+#define IRR_SHIFT(idx) ((idx * 4) % 32) -+ -+static inline u32 read_irr(void __iomem *irr0, int idx) -+{ -+ return (readl(irr0 + IRR_OFFSET(idx)) >> IRR_SHIFT(idx)) & 0xf; -+} -+ -+static inline void write_irr(void __iomem *irr0, int idx, u32 value) -+{ -+ unsigned int offset = IRR_OFFSET(idx); -+ unsigned int shift = IRR_SHIFT(idx); -+ u32 irr; -+ -+ irr = readl(irr0 + offset) & ~(0xf << shift); -+ irr |= (value & 0xf) << shift; -+ writel(irr, irr0 + offset); -+} - - static void realtek_ictl_unmask_irq(struct irq_data *i) - { - unsigned long flags; - u32 value; -+ int cpu; - - raw_spin_lock_irqsave(&irq_lock, flags); - -- value = readl(REG(RTL_ICTL_GIMR)); -- value |= BIT(i->hwirq); -- writel(value, REG(RTL_ICTL_GIMR)); -+ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { -+ value = readl(REG(RTL_ICTL_GIMR, cpu)); -+ value |= BIT(i->hwirq); -+ writel(value, REG(RTL_ICTL_GIMR, cpu)); -+ } - - raw_spin_unlock_irqrestore(&irq_lock, flags); - } -@@ -44,52 +86,137 @@ static void realtek_ictl_mask_irq(struct - { - unsigned long flags; - u32 value; -+ int cpu; - - raw_spin_lock_irqsave(&irq_lock, flags); - -- value = readl(REG(RTL_ICTL_GIMR)); -- value &= ~BIT(i->hwirq); -- writel(value, REG(RTL_ICTL_GIMR)); -+ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { -+ value = readl(REG(RTL_ICTL_GIMR, cpu)); -+ value &= ~BIT(i->hwirq); -+ writel(value, REG(RTL_ICTL_GIMR, cpu)); -+ } - - raw_spin_unlock_irqrestore(&irq_lock, flags); - } - -+static int __maybe_unused realtek_ictl_irq_affinity(struct irq_data *i, -+ const struct cpumask *dest, bool force) -+{ -+ struct realtek_ictl_output *output = i->domain->host_data; -+ cpumask_t cpu_configure; -+ cpumask_t cpu_disable; -+ cpumask_t cpu_enable; -+ unsigned long flags; -+ int cpu; -+ -+ raw_spin_lock_irqsave(&irq_lock, flags); -+ -+ cpumask_and(&cpu_configure, cpu_present_mask, &realtek_ictl_cpu_configurable); -+ -+ cpumask_and(&cpu_enable, &cpu_configure, dest); -+ cpumask_andnot(&cpu_disable, &cpu_configure, dest); -+ -+ for_each_cpu(cpu, &cpu_disable) -+ write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, 0); -+ -+ for_each_cpu(cpu, &cpu_enable) -+ write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, output->output_index + 1); -+ -+ irq_data_update_effective_affinity(i, &cpu_enable); -+ -+ raw_spin_unlock_irqrestore(&irq_lock, flags); -+ -+ return IRQ_SET_MASK_OK; -+} -+ - static struct irq_chip realtek_ictl_irq = { - .name = "realtek-rtl-intc", - .irq_mask = realtek_ictl_mask_irq, - .irq_unmask = realtek_ictl_unmask_irq, -+#ifdef CONFIG_SMP -+ .irq_set_affinity = realtek_ictl_irq_affinity, -+#endif - }; - - static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) - { -+ struct realtek_ictl_output *output = d->host_data; -+ unsigned long flags; -+ - irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq); - -+ raw_spin_lock_irqsave(&irq_lock, flags); -+ -+ output->child_mask |= BIT(hw); -+ write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1); -+ -+ raw_spin_unlock_irqrestore(&irq_lock, flags); -+ - return 0; - } - -+static int intc_select(struct irq_domain *d, struct irq_fwspec *fwspec, -+ enum irq_domain_bus_token bus_token) -+{ -+ struct realtek_ictl_output *output = d->host_data; -+ bool routed_elsewhere; -+ unsigned long flags; -+ u32 routing_old; -+ int cpu; -+ -+ if (fwspec->fwnode != output->fwnode) -+ return false; -+ -+ /* Original specifiers had only one parameter */ -+ if (fwspec->param_count < 2) -+ return true; -+ -+ raw_spin_lock_irqsave(&irq_lock, flags); -+ -+ /* -+ * Inputs can only be routed to one output, so they shouldn't be -+ * allowed to end up in multiple domains. -+ */ -+ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { -+ routing_old = read_irr(REG(RTL_ICTL_IRR0, cpu), fwspec->param[0]); -+ routed_elsewhere = routing_old && fwspec->param[1] != routing_old - 1; -+ if (routed_elsewhere) { -+ pr_warn("soc int %d already routed to output %d\n", -+ fwspec->param[0], routing_old - 1); -+ break; -+ } -+ } -+ -+ raw_spin_unlock_irqrestore(&irq_lock, flags); -+ -+ return !routed_elsewhere && fwspec->param[1] == output->output_index; -+} -+ - static const struct irq_domain_ops irq_domain_ops = { - .map = intc_map, -+ .select = intc_select, - .xlate = irq_domain_xlate_onecell, - }; - - static void realtek_irq_dispatch(struct irq_desc *desc) - { -+ struct realtek_ictl_output *output = irq_desc_get_handler_data(desc); - struct irq_chip *chip = irq_desc_get_chip(desc); -- struct irq_domain *domain; -+ int cpu = smp_processor_id(); - unsigned long pending; - unsigned int soc_int; - - chained_irq_enter(chip, desc); -- pending = readl(REG(RTL_ICTL_GIMR)) & readl(REG(RTL_ICTL_GISR)); -+ pending = readl(REG(RTL_ICTL_GIMR, cpu)) & readl(REG(RTL_ICTL_GISR, cpu)) -+ & output->child_mask; - - if (unlikely(!pending)) { - spurious_interrupt(); - goto out; - } - -- domain = irq_desc_get_handler_data(desc); -- for_each_set_bit(soc_int, &pending, 32) -- generic_handle_domain_irq(domain, soc_int); -+ for_each_set_bit(soc_int, &pending, RTL_ICTL_NUM_INPUTS) -+ generic_handle_domain_irq(output->domain, soc_int); - - out: - chained_irq_exit(chip, desc); -@@ -102,85 +229,110 @@ out: - * thus go into 4 IRRs. A routing value of '0' means the interrupt is left - * disconnected. Routing values {1..15} connect to output lines {0..14}. - */ --static int __init map_interrupts(struct device_node *node, struct irq_domain *domain) -+static int __init setup_parent_interrupts(struct device_node *node, int *parents, -+ unsigned int num_parents) - { -- struct device_node *cpu_ictl; -- const __be32 *imap; -- u32 imaplen, soc_int, cpu_int, tmp, regs[4]; -- int ret, i, irr_regs[] = { -- RTL_ICTL_IRR3, -- RTL_ICTL_IRR2, -- RTL_ICTL_IRR1, -- RTL_ICTL_IRR0, -- }; -- u8 mips_irqs_set; -+ struct realtek_ictl_output *outputs; -+ struct realtek_ictl_output *output; -+ struct irq_domain *domain; -+ unsigned int p; - -- ret = of_property_read_u32(node, "#address-cells", &tmp); -- if (ret || tmp) -- return -EINVAL; -+ outputs = kcalloc(num_parents, sizeof(*outputs), GFP_KERNEL); -+ if (!outputs) -+ return -ENOMEM; - -- imap = of_get_property(node, "interrupt-map", &imaplen); -- if (!imap || imaplen % 3) -- return -EINVAL; -+ for (p = 0; p < num_parents; p++) { -+ output = outputs + p; - -- mips_irqs_set = 0; -- memset(regs, 0, sizeof(regs)); -- for (i = 0; i < imaplen; i += 3 * sizeof(u32)) { -- soc_int = be32_to_cpup(imap); -- if (soc_int > 31) -- return -EINVAL; -- -- cpu_ictl = of_find_node_by_phandle(be32_to_cpup(imap + 1)); -- if (!cpu_ictl) -- return -EINVAL; -- ret = of_property_read_u32(cpu_ictl, "#interrupt-cells", &tmp); -- of_node_put(cpu_ictl); -- if (ret || tmp != 1) -- return -EINVAL; -- -- cpu_int = be32_to_cpup(imap + 2); -- if (cpu_int > 7 || cpu_int < 2) -- return -EINVAL; -- -- if (!(mips_irqs_set & BIT(cpu_int))) { -- irq_set_chained_handler_and_data(cpu_int, realtek_irq_dispatch, -- domain); -- mips_irqs_set |= BIT(cpu_int); -- } -+ domain = irq_domain_add_linear(node, RTL_ICTL_NUM_INPUTS, &irq_domain_ops, output); -+ if (!domain) -+ goto domain_err; - -- /* Use routing values (1..6) for CPU interrupts (2..7) */ -- regs[(soc_int * 4) / 32] |= (cpu_int - 1) << (soc_int * 4) % 32; -- imap += 3; -- } -+ output->fwnode = of_node_to_fwnode(node); -+ output->output_index = p; -+ output->domain = domain; - -- for (i = 0; i < 4; i++) -- writel(regs[i], REG(irr_regs[i])); -+ irq_set_chained_handler_and_data(parents[p], realtek_irq_dispatch, output); -+ } - - return 0; -+ -+domain_err: -+ while (p--) { -+ irq_set_chained_handler_and_data(parents[p], NULL, NULL); -+ irq_domain_remove(outputs[p].domain); -+ } -+ -+ kfree(outputs); -+ -+ return -ENOMEM; - } - - static int __init realtek_rtl_of_init(struct device_node *node, struct device_node *parent) - { -- struct irq_domain *domain; -- int ret; -+ int parent_irqs[RTL_ICTL_NUM_OUTPUTS]; -+ struct of_phandle_args oirq; -+ unsigned int num_parents; -+ unsigned int soc_irq; -+ unsigned int p; -+ int cpu; -+ -+ cpumask_clear(&realtek_ictl_cpu_configurable); -+ -+ for (cpu = 0; cpu < NR_CPUS; cpu++) { -+ realtek_ictl_base[cpu] = of_iomap(node, cpu); -+ if (realtek_ictl_base[cpu]) { -+ cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable); -+ -+ /* Disable all cascaded interrupts and clear routing */ -+ writel(0, REG(RTL_ICTL_GIMR, cpu)); -+ for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) -+ write_irr(REG(RTL_ICTL_IRR0, cpu), soc_irq, 0); -+ } -+ } - -- realtek_ictl_base = of_iomap(node, 0); -- if (!realtek_ictl_base) -+ if (cpumask_empty(&realtek_ictl_cpu_configurable)) - return -ENXIO; - -- /* Disable all cascaded interrupts */ -- writel(0, REG(RTL_ICTL_GIMR)); -+ num_parents = of_irq_count(node); -+ if (num_parents > RTL_ICTL_NUM_OUTPUTS) { -+ pr_err("too many parent interrupts\n"); -+ return -EINVAL; -+ } - -- domain = irq_domain_add_simple(node, 32, 0, -- &irq_domain_ops, NULL); -+ for (p = 0; p < num_parents; p++) -+ parent_irqs[p] = of_irq_get(node, p); - -- ret = map_interrupts(node, domain); -- if (ret) { -- pr_err("invalid interrupt map\n"); -- return ret; -+ if (WARN_ON(!num_parents)) { -+ /* -+ * If DT contains no parent interrupts, assume MIPS CPU IRQ 2 -+ * (HW0) is connected to the first output. This is the case for -+ * all known hardware anyway. "interrupt-map" is deprecated, so -+ * don't bother trying to parse that. -+ * Since this is to account for old devicetrees with one-cell -+ * interrupt specifiers, only one output domain is needed. -+ */ -+ oirq.np = of_find_compatible_node(NULL, NULL, "mti,cpu-interrupt-controller"); -+ if (oirq.np) { -+ oirq.args_count = 1; -+ oirq.args[0] = 2; -+ -+ parent_irqs[0] = irq_create_of_mapping(&oirq); -+ num_parents = 1; -+ } -+ -+ of_node_put(oirq.np); - } - -- return 0; -+ /* Ensure we haven't collected any errors before proceeding */ -+ for (p = 0; p < num_parents; p++) { -+ if (parent_irqs[p] < 0) -+ return parent_irqs[p]; -+ if (!parent_irqs[p]) -+ return -ENODEV; -+ } -+ -+ return setup_parent_interrupts(node, &parent_irqs[0], num_parents); - } - - IRQCHIP_DECLARE(realtek_rtl_intc, "realtek,rtl-intc", realtek_rtl_of_init); diff --git a/target/linux/realtek/patches-5.15/316-otto-gpio-uniprocessor-irq-mask.patch b/target/linux/realtek/patches-5.15/316-otto-gpio-uniprocessor-irq-mask.patch deleted file mode 100644 index a13d70d633..0000000000 --- a/target/linux/realtek/patches-5.15/316-otto-gpio-uniprocessor-irq-mask.patch +++ /dev/null @@ -1,51 +0,0 @@ -From bde6311569ef25a00c3beaeabfd6b78b19651872 Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Sun, 29 May 2022 19:38:09 +0200 -Subject: [PATCH] realtek: don't unmask non-maskable GPIO IRQs - -On uniprocessor builds, for_each_cpu(cpu, mask) will assume 'mask' -always contains exactly one CPU, and ignore the actual mask contents. -This causes the loop to run, even when it shouldn't on an empty mask, -and tries to access an uninitialised pointer. - -Fix this by wrapping the loop in a cpumask_empty() check, to ensure it -will not run on uniprocessor builds if the CPU mask is empty. - -Fixes: af6cd37f42f3 ("realtek: replace RTL93xx GPIO patches") -Reported-by: INAGAKI Hiroshi -Reported-by: Robert Marko -Tested-by: Robert Marko -Submitted-by: Sander Vanheule ---- - drivers/gpio/gpio-realtek-otto.c | 9 +++++++++++-- - 1 file changed, 11 insertions(+), 2 deletions(-) - ---- a/drivers/gpio/gpio-realtek-otto.c -+++ b/drivers/gpio/gpio-realtek-otto.c -@@ -301,6 +301,7 @@ static int realtek_gpio_irq_set_affinity - static int realtek_gpio_irq_init(struct gpio_chip *gc) - { - struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc); -+ void __iomem *irq_cpu_mask; - unsigned int port; - int cpu; - -@@ -308,8 +309,16 @@ static int realtek_gpio_irq_init(struct - realtek_gpio_write_imr(ctrl, port, 0, 0); - realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0)); - -- for_each_cpu(cpu, &ctrl->cpu_irq_maskable) -- iowrite8(GENMASK(7, 0), realtek_gpio_irq_cpu_mask(ctrl, port, cpu)); -+ /* -+ * Uniprocessor builds assume a mask always contains one CPU, -+ * so only start the loop if we have at least one maskable CPU. -+ */ -+ if(!cpumask_empty(&ctrl->cpu_irq_maskable)) { -+ for_each_cpu(cpu, &ctrl->cpu_irq_maskable) { -+ irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu); -+ iowrite8(GENMASK(7, 0), irq_cpu_mask); -+ } -+ } - } - - return 0; diff --git a/target/linux/realtek/patches-5.15/317-gpio-realtek-otto-switch-to-32-bit-I-O.patch b/target/linux/realtek/patches-5.15/317-gpio-realtek-otto-switch-to-32-bit-I-O.patch deleted file mode 100644 index 9f2c3b50b6..0000000000 --- a/target/linux/realtek/patches-5.15/317-gpio-realtek-otto-switch-to-32-bit-I-O.patch +++ /dev/null @@ -1,368 +0,0 @@ -From ee0175b3b44288c74d5292c2a9c2c154f6c0317e Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Sun, 7 Aug 2022 21:21:15 +0200 -Subject: [PATCH] gpio: realtek-otto: switch to 32-bit I/O - -By using 16-bit I/O on the GPIO peripheral, which is apparently not safe -on MIPS, the IMR can end up containing garbage. This then results in -interrupt triggers for lines that don't have an interrupt handler -associated. The irq_desc lookup fails, and the ISR will not be cleared, -keeping the CPU busy until reboot, or until another IMR operation -restores the correct value. This situation appears to happen very -rarely, for < 0.5% of IMR writes. - -Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory -mapped peripheral registers, switch to using 32-bit I/O only, operating -on the entire bank for all single bit line settings. For 2-bit line -settings, with 16-bit port values, stick to manual (un)packing. - -This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear -GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48). - -Reported-by: Luiz Angelo Daros de Luca # DGS-1210-52 -Reported-by: Birger Koblitz # GS728TP -Reported-by: Jan Hoffmann # 1920-16G -Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support") -Signed-off-by: Sander Vanheule -Cc: Paul Cercueil -Reviewed-by: Linus Walleij -Signed-off-by: Bartosz Golaszewski - -Update patch for missing upstream changes: - - commit a01a40e33499 ("gpio: realtek-otto: Make the irqchip immutable") -Signed-off-by: Sander Vanheule - ---- - drivers/gpio/gpio-realtek-otto.c | 166 ++++++++++++++++--------------- - 1 file changed, 85 insertions(+), 81 deletions(-) - ---- a/drivers/gpio/gpio-realtek-otto.c -+++ b/drivers/gpio/gpio-realtek-otto.c -@@ -46,10 +46,20 @@ - * @lock: Lock for accessing the IRQ registers and values - * @intr_mask: Mask for interrupts lines - * @intr_type: Interrupt type selection -+ * @bank_read: Read a bank setting as a single 32-bit value -+ * @bank_write: Write a bank setting as a single 32-bit value -+ * @imr_line_pos: Bit shift of an IRQ line's IMR value. -+ * -+ * The DIR, DATA, and ISR registers consist of four 8-bit port values, packed -+ * into a single 32-bit register. Use @bank_read (@bank_write) to get (assign) -+ * a value from (to) these registers. The IMR register consists of four 16-bit -+ * port values, packed into two 32-bit registers. Use @imr_line_pos to get the -+ * bit shift of the 2-bit field for a line's IMR settings. Shifts larger than -+ * 32 overflow into the second register. - * - * Because the interrupt mask register (IMR) combines the function of IRQ type - * selection and masking, two extra values are stored. @intr_mask is used to -- * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store -+ * mask/unmask the interrupts for a GPIO line, and @intr_type is used to store - * the selected interrupt types. The logical AND of these values is written to - * IMR on changes. - */ -@@ -59,10 +69,11 @@ struct realtek_gpio_ctrl { - void __iomem *cpumask_base; - struct cpumask cpu_irq_maskable; - raw_spinlock_t lock; -- u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK]; -- u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK]; -- unsigned int (*port_offset_u8)(unsigned int port); -- unsigned int (*port_offset_u16)(unsigned int port); -+ u8 intr_mask[REALTEK_GPIO_MAX]; -+ u8 intr_type[REALTEK_GPIO_MAX]; -+ u32 (*bank_read)(void __iomem *reg); -+ void (*bank_write)(void __iomem *reg, u32 value); -+ unsigned int (*line_imr_pos)(unsigned int line); - }; - - /* Expand with more flags as devices with other quirks are added */ -@@ -101,14 +112,22 @@ static struct realtek_gpio_ctrl *irq_dat - * port. The two interrupt mask registers store two bits per GPIO, so use u16 - * values. - */ --static unsigned int realtek_gpio_port_offset_u8(unsigned int port) -+static u32 realtek_gpio_bank_read_swapped(void __iomem *reg) -+{ -+ return ioread32be(reg); -+} -+ -+static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value) - { -- return port; -+ iowrite32be(value, reg); - } - --static unsigned int realtek_gpio_port_offset_u16(unsigned int port) -+static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line) - { -- return 2 * port; -+ unsigned int port_pin = line % 8; -+ unsigned int port = line / 8; -+ -+ return 2 * (8 * (port ^ 1) + port_pin); - } - - /* -@@ -119,64 +138,65 @@ static unsigned int realtek_gpio_port_of - * per GPIO, so use u16 values. The first register contains ports 1 and 0, the - * second ports 3 and 2. - */ --static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port) -+static u32 realtek_gpio_bank_read(void __iomem *reg) - { -- return 3 - port; -+ return ioread32(reg); - } - --static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port) -+static void realtek_gpio_bank_write(void __iomem *reg, u32 value) - { -- return 2 * (port ^ 1); -+ iowrite32(value, reg); - } - --static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl, -- unsigned int port, u16 irq_type, u16 irq_mask) -+static unsigned int realtek_gpio_line_imr_pos(unsigned int line) - { -- iowrite16(irq_type & irq_mask, -- ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port)); -+ return 2 * line; - } - --static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, -- unsigned int port, u8 mask) -+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask) - { -- iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port)); -+ ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask); - } - --static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port) -+static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl) - { -- return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port)); -+ return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR); - } - --/* Set the rising and falling edge mask bits for a GPIO port pin */ --static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value) -+/* Set the rising and falling edge mask bits for a GPIO pin */ -+static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line) - { -- return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin; -+ void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR; -+ unsigned int line_shift = ctrl->line_imr_pos(line); -+ unsigned int shift = line_shift % 32; -+ u32 irq_type = ctrl->intr_type[line]; -+ u32 irq_mask = ctrl->intr_mask[line]; -+ u32 reg_val; -+ -+ reg += 4 * (line_shift / 32); -+ reg_val = ioread32(reg); -+ reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift); -+ reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift; -+ iowrite32(reg_val, reg); - } - - static void realtek_gpio_irq_ack(struct irq_data *data) - { - struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); - irq_hw_number_t line = irqd_to_hwirq(data); -- unsigned int port = line / 8; -- unsigned int port_pin = line % 8; - -- realtek_gpio_clear_isr(ctrl, port, BIT(port_pin)); -+ realtek_gpio_clear_isr(ctrl, BIT(line)); - } - - static void realtek_gpio_irq_unmask(struct irq_data *data) - { - struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); - unsigned int line = irqd_to_hwirq(data); -- unsigned int port = line / 8; -- unsigned int port_pin = line % 8; - unsigned long flags; -- u16 m; - - raw_spin_lock_irqsave(&ctrl->lock, flags); -- m = ctrl->intr_mask[port]; -- m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK); -- ctrl->intr_mask[port] = m; -- realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m); -+ ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK; -+ realtek_gpio_update_line_imr(ctrl, line); - raw_spin_unlock_irqrestore(&ctrl->lock, flags); - } - -@@ -184,16 +204,11 @@ static void realtek_gpio_irq_mask(struct - { - struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); - unsigned int line = irqd_to_hwirq(data); -- unsigned int port = line / 8; -- unsigned int port_pin = line % 8; - unsigned long flags; -- u16 m; - - raw_spin_lock_irqsave(&ctrl->lock, flags); -- m = ctrl->intr_mask[port]; -- m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK); -- ctrl->intr_mask[port] = m; -- realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m); -+ ctrl->intr_mask[line] = 0; -+ realtek_gpio_update_line_imr(ctrl, line); - raw_spin_unlock_irqrestore(&ctrl->lock, flags); - } - -@@ -201,10 +216,8 @@ static int realtek_gpio_irq_set_type(str - { - struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); - unsigned int line = irqd_to_hwirq(data); -- unsigned int port = line / 8; -- unsigned int port_pin = line % 8; - unsigned long flags; -- u16 type, t; -+ u8 type; - - switch (flow_type & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_EDGE_FALLING: -@@ -223,11 +236,8 @@ static int realtek_gpio_irq_set_type(str - irq_set_handler_locked(data, handle_edge_irq); - - raw_spin_lock_irqsave(&ctrl->lock, flags); -- t = ctrl->intr_type[port]; -- t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK); -- t |= realtek_gpio_imr_bits(port_pin, type); -- ctrl->intr_type[port] = t; -- realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]); -+ ctrl->intr_type[line] = type; -+ realtek_gpio_update_line_imr(ctrl, line); - raw_spin_unlock_irqrestore(&ctrl->lock, flags); - - return 0; -@@ -238,28 +248,21 @@ static void realtek_gpio_irq_handler(str - struct gpio_chip *gc = irq_desc_get_handler_data(desc); - struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc); - struct irq_chip *irq_chip = irq_desc_get_chip(desc); -- unsigned int lines_done; -- unsigned int port_pin_count; - unsigned long status; - int offset; - - chained_irq_enter(irq_chip, desc); - -- for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) { -- status = realtek_gpio_read_isr(ctrl, lines_done / 8); -- port_pin_count = min(gc->ngpio - lines_done, 8U); -- for_each_set_bit(offset, &status, port_pin_count) -- generic_handle_domain_irq(gc->irq.domain, offset + lines_done); -- } -+ status = realtek_gpio_read_isr(ctrl); -+ for_each_set_bit(offset, &status, gc->ngpio) -+ generic_handle_domain_irq(gc->irq.domain, offset); - - chained_irq_exit(irq_chip, desc); - } - --static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, -- unsigned int port, int cpu) -+static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu) - { -- return ctrl->cpumask_base + ctrl->port_offset_u8(port) + -- REALTEK_GPIO_PORTS_PER_BANK * cpu; -+ return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu; - } - - static int realtek_gpio_irq_set_affinity(struct irq_data *data, -@@ -267,12 +270,10 @@ static int realtek_gpio_irq_set_affinity - { - struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data); - unsigned int line = irqd_to_hwirq(data); -- unsigned int port = line / 8; -- unsigned int port_pin = line % 8; - void __iomem *irq_cpu_mask; - unsigned long flags; - int cpu; -- u8 v; -+ u32 v; - - if (!ctrl->cpumask_base) - return -ENXIO; -@@ -280,15 +281,15 @@ static int realtek_gpio_irq_set_affinity - raw_spin_lock_irqsave(&ctrl->lock, flags); - - for_each_cpu(cpu, &ctrl->cpu_irq_maskable) { -- irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu); -- v = ioread8(irq_cpu_mask); -+ irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu); -+ v = ctrl->bank_read(irq_cpu_mask); - - if (cpumask_test_cpu(cpu, dest)) -- v |= BIT(port_pin); -+ v |= BIT(line); - else -- v &= ~BIT(port_pin); -+ v &= ~BIT(line); - -- iowrite8(v, irq_cpu_mask); -+ ctrl->bank_write(irq_cpu_mask, v); - } - - raw_spin_unlock_irqrestore(&ctrl->lock, flags); -@@ -302,22 +303,23 @@ static int realtek_gpio_irq_init(struct - { - struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc); - void __iomem *irq_cpu_mask; -- unsigned int port; -+ u32 mask_all = GENMASK(gc->ngpio - 1, 0); -+ unsigned int line; - int cpu; - -- for (port = 0; (port * 8) < gc->ngpio; port++) { -- realtek_gpio_write_imr(ctrl, port, 0, 0); -- realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0)); -- -- /* -- * Uniprocessor builds assume a mask always contains one CPU, -- * so only start the loop if we have at least one maskable CPU. -- */ -- if(!cpumask_empty(&ctrl->cpu_irq_maskable)) { -- for_each_cpu(cpu, &ctrl->cpu_irq_maskable) { -- irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu); -- iowrite8(GENMASK(7, 0), irq_cpu_mask); -- } -+ for (line = 0; line < gc->ngpio; line++) -+ realtek_gpio_update_line_imr(ctrl, line); -+ -+ realtek_gpio_clear_isr(ctrl, mask_all); -+ -+ /* -+ * Uniprocessor builds assume a mask always contains one CPU, -+ * so only start the loop if we have at least one maskable CPU. -+ */ -+ if(!cpumask_empty(&ctrl->cpu_irq_maskable)) { -+ for_each_cpu(cpu, &ctrl->cpu_irq_maskable) { -+ irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu); -+ ctrl->bank_write(irq_cpu_mask, mask_all); - } - } - -@@ -390,12 +392,14 @@ static int realtek_gpio_probe(struct pla - - if (dev_flags & GPIO_PORTS_REVERSED) { - bgpio_flags = 0; -- ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev; -- ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev; -+ ctrl->bank_read = realtek_gpio_bank_read; -+ ctrl->bank_write = realtek_gpio_bank_write; -+ ctrl->line_imr_pos = realtek_gpio_line_imr_pos; - } else { - bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER; -- ctrl->port_offset_u8 = realtek_gpio_port_offset_u8; -- ctrl->port_offset_u16 = realtek_gpio_port_offset_u16; -+ ctrl->bank_read = realtek_gpio_bank_read_swapped; -+ ctrl->bank_write = realtek_gpio_bank_write_swapped; -+ ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped; - } - - err = bgpio_init(&ctrl->gc, dev, 4, diff --git a/target/linux/realtek/patches-5.15/318-add-rtl83xx-clk-support.patch b/target/linux/realtek/patches-5.15/318-add-rtl83xx-clk-support.patch deleted file mode 100644 index 7d063d4faa..0000000000 --- a/target/linux/realtek/patches-5.15/318-add-rtl83xx-clk-support.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 800d5fb3c6a16661932c932bacd660e38d06b727 Mon Sep 17 00:00:00 2001 -From: Markus Stockhausen -Date: Thu, 25 Aug 2022 08:22:36 +0200 -Subject: [PATCH] realtek: add patch to enable new clock driver in kernel - -Allow building the clock driver with kernel config options. - -Submitted-by: Markus Stockhausen ---- - drivers/clk/Kconfig | 1 + - drivers/clk/Makefile | 1 + - 2 files changed, 2 insertions(+) - ---- a/drivers/clk/Kconfig -+++ b/drivers/clk/Kconfig -@@ -406,6 +406,7 @@ source "drivers/clk/mstar/Kconfig" - source "drivers/clk/mvebu/Kconfig" - source "drivers/clk/pistachio/Kconfig" - source "drivers/clk/qcom/Kconfig" -+source "drivers/clk/realtek/Kconfig" - source "drivers/clk/ralink/Kconfig" - source "drivers/clk/renesas/Kconfig" - source "drivers/clk/rockchip/Kconfig" ---- a/drivers/clk/Makefile -+++ b/drivers/clk/Makefile -@@ -101,6 +101,7 @@ obj-$(CONFIG_COMMON_CLK_PISTACHIO) += pi - obj-$(CONFIG_COMMON_CLK_PXA) += pxa/ - obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/ - obj-y += ralink/ -+obj-$(CONFIG_COMMON_CLK_REALTEK) += realtek/ - obj-y += renesas/ - obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ - obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/ diff --git a/target/linux/realtek/patches-5.15/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch b/target/linux/realtek/patches-5.15/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch deleted file mode 100644 index 0c29b7739e..0000000000 --- a/target/linux/realtek/patches-5.15/319-irqchip-irq-realtek-rtl-fix-VPE-affinity.patch +++ /dev/null @@ -1,159 +0,0 @@ -From 2cd00b51470a30198b048a5fca48a04db77e29cc Mon Sep 17 00:00:00 2001 -From: INAGAKI Hiroshi -Date: Fri, 21 May 2021 23:16:37 +0900 -Subject: [PATCH] realtek: backport irq-realtek-rtl driver from 5.12 to 5.10 - -This patch backports "irq-realtek-rtl" driver to Kernel 5.10 from 5.12. -"MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" -is used in OpenWrt, so update the dependency by the additional patch. - -Submitted-by: INAGAKI Hiroshi ---- - drivers/irqchip/irq-realtek-rtl.c | 38 +++++++++++------ - 1 files changed, 58 insertions(+), 20 deletions(-) - ---- a/drivers/irqchip/irq-realtek-rtl.c -+++ b/drivers/irqchip/irq-realtek-rtl.c -@@ -28,6 +28,7 @@ static DEFINE_RAW_SPINLOCK(irq_lock); - - #define REG(offset, cpu) (realtek_ictl_base[cpu] + offset) - -+static u32 realtek_ictl_unmask[NR_CPUS]; - static void __iomem *realtek_ictl_base[NR_CPUS]; - static cpumask_t realtek_ictl_cpu_configurable; - -@@ -41,11 +42,29 @@ struct realtek_ictl_output { - }; - - /* -- * IRR0-IRR3 store 4 bits per interrupt, but Realtek uses inverted numbering, -- * placing IRQ 31 in the first four bits. A routing value of '0' means the -- * interrupt is left disconnected. Routing values {1..15} connect to output -- * lines {0..14}. -+ * Per CPU we have a set of 5 registers that determine interrupt handling for -+ * 32 external interrupts. GIMR (enable/disable interrupt) plus IRR0-IRR3 that -+ * contain "routing" or "priority" values. GIMR uses one bit for each interrupt -+ * and IRRx store 4 bits per interrupt. Realtek uses inverted numbering, -+ * placing IRQ 31 in the first four bits. The register combinations give the -+ * following results for a single interrupt in the wild: -+ * -+ * a) GIMR = 0 / IRRx > 0 -> no interrupts -+ * b) GIMR = 0 / IRRx = 0 -> no interrupts -+ * c) GIMR = 1 / IRRx > 0 -> interrupts -+ * d) GIMR = 1 / IRRx = 0 -> rare interrupts in SMP environment -+ * -+ * Combination d) seems to trigger interrupts only on a VPE if the other VPE -+ * has GIMR = 0 and IRRx > 0. E.g. busy without interrupts allowed. To provide -+ * IRQ balancing features in SMP this driver will handle the registers as -+ * follows: -+ * -+ * 1) set IRRx > 0 for VPE where the interrupt is desired -+ * 2) set IRRx = 0 for VPE where the interrupt is not desired -+ * 3) set both GIMR = 0 to mask (disabled) interrupt -+ * 4) set GIMR = 1 to unmask (enable) interrupt but only for VPE where IRRx > 0 - */ -+ - #define IRR_OFFSET(idx) (4 * (3 - (idx * 4) / 32)) - #define IRR_SHIFT(idx) ((idx * 4) % 32) - -@@ -65,19 +84,33 @@ static inline void write_irr(void __iome - writel(irr, irr0 + offset); - } - -+static inline void enable_gimr(int hwirq, int cpu) -+{ -+ u32 value; -+ -+ value = readl(REG(RTL_ICTL_GIMR, cpu)); -+ value |= (BIT(hwirq) & realtek_ictl_unmask[cpu]); -+ writel(value, REG(RTL_ICTL_GIMR, cpu)); -+} -+ -+static inline void disable_gimr(int hwirq, int cpu) -+{ -+ u32 value; -+ -+ value = readl(REG(RTL_ICTL_GIMR, cpu)); -+ value &= ~BIT(hwirq); -+ writel(value, REG(RTL_ICTL_GIMR, cpu)); -+} -+ - static void realtek_ictl_unmask_irq(struct irq_data *i) - { - unsigned long flags; -- u32 value; - int cpu; - - raw_spin_lock_irqsave(&irq_lock, flags); - -- for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { -- value = readl(REG(RTL_ICTL_GIMR, cpu)); -- value |= BIT(i->hwirq); -- writel(value, REG(RTL_ICTL_GIMR, cpu)); -- } -+ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) -+ enable_gimr(i->hwirq, cpu); - - raw_spin_unlock_irqrestore(&irq_lock, flags); - } -@@ -85,16 +118,12 @@ static void realtek_ictl_unmask_irq(stru - static void realtek_ictl_mask_irq(struct irq_data *i) - { - unsigned long flags; -- u32 value; - int cpu; - - raw_spin_lock_irqsave(&irq_lock, flags); - -- for_each_cpu(cpu, &realtek_ictl_cpu_configurable) { -- value = readl(REG(RTL_ICTL_GIMR, cpu)); -- value &= ~BIT(i->hwirq); -- writel(value, REG(RTL_ICTL_GIMR, cpu)); -- } -+ for_each_cpu(cpu, &realtek_ictl_cpu_configurable) -+ disable_gimr(i->hwirq, cpu); - - raw_spin_unlock_irqrestore(&irq_lock, flags); - } -@@ -116,11 +145,17 @@ static int __maybe_unused realtek_ictl_i - cpumask_and(&cpu_enable, &cpu_configure, dest); - cpumask_andnot(&cpu_disable, &cpu_configure, dest); - -- for_each_cpu(cpu, &cpu_disable) -+ for_each_cpu(cpu, &cpu_disable) { - write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, 0); -+ realtek_ictl_unmask[cpu] &= ~BIT(i->hwirq); -+ disable_gimr(i->hwirq, cpu); -+ } - -- for_each_cpu(cpu, &cpu_enable) -+ for_each_cpu(cpu, &cpu_enable) { - write_irr(REG(RTL_ICTL_IRR0, cpu), i->hwirq, output->output_index + 1); -+ realtek_ictl_unmask[cpu] |= BIT(i->hwirq); -+ enable_gimr(i->hwirq, cpu); -+ } - - irq_data_update_effective_affinity(i, &cpu_enable); - -@@ -149,6 +184,7 @@ static int intc_map(struct irq_domain *d - - output->child_mask |= BIT(hw); - write_irr(REG(RTL_ICTL_IRR0, 0), hw, output->output_index + 1); -+ realtek_ictl_unmask[0] |= BIT(hw); - - raw_spin_unlock_irqrestore(&irq_lock, flags); - -@@ -285,9 +321,11 @@ static int __init realtek_rtl_of_init(st - cpumask_set_cpu(cpu, &realtek_ictl_cpu_configurable); - - /* Disable all cascaded interrupts and clear routing */ -- writel(0, REG(RTL_ICTL_GIMR, cpu)); -- for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) -+ for (soc_irq = 0; soc_irq < RTL_ICTL_NUM_INPUTS; soc_irq++) { - write_irr(REG(RTL_ICTL_IRR0, cpu), soc_irq, 0); -+ realtek_ictl_unmask[cpu] &= ~BIT(soc_irq); -+ disable_gimr(soc_irq, cpu); -+ } - } - } - diff --git a/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch b/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch deleted file mode 100644 index 8c6a4c3639..0000000000 --- a/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 26 Nov 2020 12:02:21 +0100 -Subject: net: dsa: Add support for rtl838x switch - -* rename the target to realtek -* add refactored DSA driver -* add latest gpio driver -* lots of arch cleanups -* new irq driver -* additional boards - -Submitted-by: Bert Vermeulen -Submitted-by: Birger Koblitz -Submitted-by: Sander Vanheule -Submitted-by: Bjørn Mork -Submitted-by: John Crispin ---- - drivers/net/dsa/rtl83xx/Kconfig | 2 ++ - drivers/net/dsa/rtl83xx/Makefile | 1 + - 2 files changed, 3 insertions(+) - ---- a/drivers/net/dsa/Kconfig -+++ b/drivers/net/dsa/Kconfig -@@ -85,6 +85,8 @@ source "drivers/net/dsa/sja1105/Kconfig" - - source "drivers/net/dsa/xrs700x/Kconfig" - -+source "drivers/net/dsa/rtl83xx/Kconfig" -+ - config NET_DSA_REALTEK_SMI - tristate "Realtek SMI Ethernet switch family support" - select NET_DSA_TAG_RTL4_A ---- a/drivers/net/dsa/Makefile -+++ b/drivers/net/dsa/Makefile -@@ -24,5 +24,6 @@ obj-y += microchip/ - obj-y += mv88e6xxx/ - obj-y += ocelot/ - obj-y += qca/ -+obj-y += rtl83xx/ - obj-y += sja1105/ - obj-y += xrs700x/ diff --git a/target/linux/realtek/patches-5.15/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch b/target/linux/realtek/patches-5.15/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch deleted file mode 100644 index 0cb784fcbf..0000000000 --- a/target/linux/realtek/patches-5.15/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 26 Nov 2020 12:02:21 +0100 -Subject: net: dsa: Add rtl838x support for tag trailer - -* rename the target to realtek -* add refactored DSA driver -* add latest gpio driver -* lots of arch cleanups -* new irq driver -* additional boards - -Submitted-by: Bert Vermeulen -Submitted-by: Birger Koblitz -Submitted-by: Sander Vanheule -Submitted-by: Bjørn Mork -Submitted-by: John Crispin ---- - net/dsa/tag_trailer.c | 16 +++++++++++++- - 1 file changed, 17 insertions(+), 1 deletion(-) - ---- a/net/dsa/tag_trailer.c -+++ b/net/dsa/tag_trailer.c -@@ -17,7 +17,12 @@ static struct sk_buff *trailer_xmit(stru - - trailer = skb_put(skb, 4); - trailer[0] = 0x80; -+ -+#ifdef CONFIG_NET_DSA_RTL83XX -+ trailer[1] = dp->index; -+#else - trailer[1] = 1 << dp->index; -+#endif /* CONFIG_NET_DSA_RTL838X */ - trailer[2] = 0x10; - trailer[3] = 0x00; - -@@ -33,12 +38,23 @@ static struct sk_buff *trailer_rcv(struc - return NULL; - - trailer = skb_tail_pointer(skb) - 4; -+ -+#ifdef CONFIG_NET_DSA_RTL83XX -+ if (trailer[0] != 0x80 || (trailer[1] & 0x80) != 0x00 || -+ (trailer[2] & 0xef) != 0x00 || trailer[3] != 0x00) -+ return NULL; -+ -+ if (trailer[1] & 0x40) -+ skb->offload_fwd_mark = 1; -+ -+ source_port = trailer[1] & 0x3f; -+#else - if (trailer[0] != 0x80 || (trailer[1] & 0xf8) != 0x00 || - (trailer[2] & 0xef) != 0x00 || trailer[3] != 0x00) - return NULL; - - source_port = trailer[1] & 7; -- -+#endif - skb->dev = dsa_master_find_slave(dev, 0, source_port); - if (!skb->dev) - return NULL; diff --git a/target/linux/realtek/patches-5.15/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch b/target/linux/realtek/patches-5.15/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch deleted file mode 100644 index 63991d373c..0000000000 --- a/target/linux/realtek/patches-5.15/702-net-dsa-increase-dsa-max-ports-for-rtl838x.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 26 Nov 2020 12:02:21 +0100 -Subject: net: dsa: Increase max ports for rtl838x - -* rename the target to realtek -* add refactored DSA driver -* add latest gpio driver -* lots of arch cleanups -* new irq driver -* additional boards - -Submitted-by: Bert Vermeulen -Submitted-by: Birger Koblitz -Submitted-by: Sander Vanheule -Submitted-by: Bjørn Mork -Submitted-by: John Crispin ---- - include/linux/platform_data/dsa.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/include/linux/platform_data/dsa.h -+++ b/include/linux/platform_data/dsa.h -@@ -6,7 +6,7 @@ struct device; - struct net_device; - - #define DSA_MAX_SWITCHES 4 --#define DSA_MAX_PORTS 12 -+#define DSA_MAX_PORTS 54 - #define DSA_RTABLE_NONE -1 - - struct dsa_chip_data { diff --git a/target/linux/realtek/patches-5.15/702-net-ethernet-add-support-for-rtl838x-ethernet.patch b/target/linux/realtek/patches-5.15/702-net-ethernet-add-support-for-rtl838x-ethernet.patch deleted file mode 100644 index 1c25c42b91..0000000000 --- a/target/linux/realtek/patches-5.15/702-net-ethernet-add-support-for-rtl838x-ethernet.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 26 Nov 2020 12:02:21 +0100 -Subject: net: ethernet: Add support for RTL838x ethernet - -* rename the target to realtek -* add refactored DSA driver -* add latest gpio driver -* lots of arch cleanups -* new irq driver -* additional boards - -Submitted-by: Bert Vermeulen -Submitted-by: Birger Koblitz -Submitted-by: Sander Vanheule -Submitted-by: Bjørn Mork -Submitted-by: John Crispin ---- - drivers/net/ethernet/Kconfig | 7 +- - drivers/net/ethernet/Makefile | 1 + - 2 files changed, 8 insertions(+) - ---- a/drivers/net/ethernet/Kconfig -+++ b/drivers/net/ethernet/Kconfig -@@ -166,6 +166,13 @@ source "drivers/net/ethernet/rdc/Kconfig - source "drivers/net/ethernet/realtek/Kconfig" - source "drivers/net/ethernet/renesas/Kconfig" - source "drivers/net/ethernet/rocker/Kconfig" -+ -+config NET_RTL838X -+ tristate "Realtek rtl838x Ethernet MAC support" -+ depends on RTL83XX -+ help -+ Say Y here if you want to use the Realtek rtl838x Gbps Ethernet MAC. -+ - source "drivers/net/ethernet/samsung/Kconfig" - source "drivers/net/ethernet/seeq/Kconfig" - source "drivers/net/ethernet/sgi/Kconfig" ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -77,6 +77,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += real - obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/ - obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ - obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/ -+obj-$(CONFIG_NET_RTL838X) += rtl838x_eth.o - obj-$(CONFIG_NET_VENDOR_SAMSUNG) += samsung/ - obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/ - obj-$(CONFIG_NET_VENDOR_SILAN) += silan/ diff --git a/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch b/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch deleted file mode 100644 index bf4d35764e..0000000000 --- a/target/linux/realtek/patches-5.15/703-include-linux-add-phy-ops-for-rtl838x.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 26 Nov 2020 12:02:21 +0100 -Subject: phy: Add PHY ops for rtl838x EEE - -* rename the target to realtek -* add refactored DSA driver -* add latest gpio driver -* lots of arch cleanups -* new irq driver -* additional boards - -Submitted-by: Bert Vermeulen -Submitted-by: Birger Koblitz -Submitted-by: Sander Vanheule -Submitted-by: Bjørn Mork -Submitted-by: John Crispin ---- - include/linux/phy.h | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -1009,6 +1009,10 @@ struct phy_driver { - int (*led_blink_set)(struct phy_device *dev, u8 index, - unsigned long *delay_on, - unsigned long *delay_off); -+ int (*get_port)(struct phy_device *dev); -+ int (*set_port)(struct phy_device *dev, int port); -+ int (*get_eee)(struct phy_device *dev, struct ethtool_eee *e); -+ int (*set_eee)(struct phy_device *dev, struct ethtool_eee *e); - }; - #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \ - struct phy_driver, mdiodrv) diff --git a/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch b/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch deleted file mode 100644 index bf6e517cfb..0000000000 --- a/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 26 Nov 2020 12:02:21 +0100 -Subject: net: phy: EEE support for rtl838x - -* rename the target to realtek -* add refactored DSA driver -* add latest gpio driver -* lots of arch cleanups -* new irq driver -* additional boards - -Submitted-by: Bert Vermeulen -Submitted-by: Birger Koblitz -Submitted-by: Sander Vanheule -Submitted-by: Bjørn Mork -Submitted-by: John Crispin ---- - drivers/net/phy/phylink. | 14 +++++++++++-- - 1 file changed, 12 insertions(+), 2 deletions(-) - ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -1994,6 +1994,11 @@ int phylink_ethtool_ksettings_set(struct - * the presence of a PHY, this should not be changed as that - * should be determined from the media side advertisement. - */ -+ if (pl->phydev->drv->get_port && pl->phydev->drv->set_port) { -+ if(pl->phydev->drv->get_port(pl->phydev) != kset->base.port) { -+ pl->phydev->drv->set_port(pl->phydev, kset->base.port); -+ } -+ } - return phy_ethtool_ksettings_set(pl->phydev, kset); - } - -@@ -2297,8 +2302,11 @@ int phylink_ethtool_get_eee(struct phyli - - ASSERT_RTNL(); - -- if (pl->phydev) -+ if (pl->phydev) { -+ if (pl->phydev->drv->get_eee) -+ return pl->phydev->drv->get_eee(pl->phydev, eee); - ret = phy_ethtool_get_eee(pl->phydev, eee); -+ } - - return ret; - } -@@ -2315,8 +2323,11 @@ int phylink_ethtool_set_eee(struct phyli - - ASSERT_RTNL(); - -- if (pl->phydev) -+ if (pl->phydev) { -+ if (pl->phydev->drv->set_eee) -+ return pl->phydev->drv->set_eee(pl->phydev, eee); - ret = phy_ethtool_set_eee(pl->phydev, eee); -+ } - - return ret; - } diff --git a/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch b/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch deleted file mode 100644 index 700ec97be8..0000000000 --- a/target/linux/realtek/patches-5.15/704-include-linux-add-phy-hsgmii-mode.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 9d9bf16aa8d966834ac1280f96c37d22552c33d1 Mon Sep 17 00:00:00 2001 -From: Birger Koblitz -Date: Wed, 8 Sep 2021 16:13:18 +0200 -Subject: phy: Add PHY hsgmii mode - -This adds RTL93xx-specific MAC configuration routines that allow also configuration -of 10GBit links for phylink. There is support for the Realtek-specific HISGMI -protocol. - -Submitted-by: Birger Koblitz ---- - drivers/net/phy/phylink.c | 2 ++ - include/linux/phy.h | 3 +++ - 2 file changed, 5 insertions(+) - ---- a/drivers/net/phy/phy-core.c -+++ b/drivers/net/phy/phy-core.c -@@ -124,6 +124,7 @@ int phy_interface_num_ports(phy_interfac - case PHY_INTERFACE_MODE_MOCA: - case PHY_INTERFACE_MODE_TRGMII: - case PHY_INTERFACE_MODE_USXGMII: -+ case PHY_INTERFACE_MODE_HSGMII: - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_SMII: - case PHY_INTERFACE_MODE_1000BASEX: ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -410,6 +410,7 @@ void phylink_get_linkmodes(unsigned long - - case PHY_INTERFACE_MODE_XGMII: - case PHY_INTERFACE_MODE_RXAUI: -+ case PHY_INTERFACE_MODE_HSGMII: - case PHY_INTERFACE_MODE_XAUI: - case PHY_INTERFACE_MODE_10GBASER: - case PHY_INTERFACE_MODE_10GKR: -@@ -665,6 +666,7 @@ static int phylink_parse_mode(struct phy - fallthrough; - case PHY_INTERFACE_MODE_USXGMII: - case PHY_INTERFACE_MODE_10GKR: -+ case PHY_INTERFACE_MODE_HSGMII: - case PHY_INTERFACE_MODE_10GBASER: - phylink_set(pl->supported, 10baseT_Half); - phylink_set(pl->supported, 10baseT_Full); ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -141,6 +141,7 @@ typedef enum { - PHY_INTERFACE_MODE_XGMII, - PHY_INTERFACE_MODE_XLGMII, - PHY_INTERFACE_MODE_MOCA, -+ PHY_INTERFACE_MODE_HSGMII, - PHY_INTERFACE_MODE_QSGMII, - PHY_INTERFACE_MODE_TRGMII, - PHY_INTERFACE_MODE_100BASEX, -@@ -248,6 +249,8 @@ static inline const char *phy_modes(phy_ - return "xlgmii"; - case PHY_INTERFACE_MODE_MOCA: - return "moca"; -+ case PHY_INTERFACE_MODE_HSGMII: -+ return "hsgmii"; - case PHY_INTERFACE_MODE_QSGMII: - return "qsgmii"; - case PHY_INTERFACE_MODE_TRGMII: diff --git a/target/linux/realtek/patches-5.15/705-add-rtl-phy.patch b/target/linux/realtek/patches-5.15/705-add-rtl-phy.patch deleted file mode 100644 index c6f8e6508b..0000000000 --- a/target/linux/realtek/patches-5.15/705-add-rtl-phy.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 89f71ebb355c624320c2b0ace8ae9488ff53cbeb Mon Sep 17 00:00:00 2001 -From: Birger Koblitz -Date: Tue, 5 Jan 2021 20:40:52 +0100 -Subject: PHY: Add realtek PHY - -This fixes the build problems for the REALTEK target by adding a proper -configuration option for the phy module. - -Submitted-by: Birger Koblitz ---- - drivers/net/phy/Kconfig | 6 ++++++ - drivers/net/phy/Makefile | 1 + - 2 files changed, 7 insertions(+) - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -354,6 +354,12 @@ config REALTEK_PHY - help - Supports the Realtek 821x PHY. - -+config REALTEK_SOC_PHY -+ tristate "Realtek SoC PHYs" -+ depends on RTL83XX -+ help -+ Supports the PHYs found in combination with Realtek Switch SoCs -+ - config RENESAS_PHY - tristate "Renesas PHYs" - help ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -89,6 +89,7 @@ obj-$(CONFIG_NXP_C45_TJA11XX_PHY) += nxp - obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o - obj-$(CONFIG_QSEMI_PHY) += qsemi.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o -+obj-$(CONFIG_REALTEK_SOC_PHY) += rtl83xx-phy.o - obj-$(CONFIG_RENESAS_PHY) += uPD60620.o - obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o - obj-$(CONFIG_SMSC_PHY) += smsc.o diff --git a/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch b/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch deleted file mode 100644 index 9a6b00d7c0..0000000000 --- a/target/linux/realtek/patches-5.15/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 2b88563ee5aafd9571d965b7f2093a0f58d98a31 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 26 Nov 2020 12:02:21 +0100 -Subject: PHY: Increase max PHY adddress number - -* rename the target to realtek -* add refactored DSA driver -* add latest gpio driver -* lots of arch cleanups -* new irq driver -* additional boards - -Submitted-by: Bert Vermeulen -Submitted-by: Birger Koblitz -Submitted-by: Sander Vanheule -Submitted-by: Bjørn Mork -Submitted-by: John Crispin ---- - include/linux/phy.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -287,7 +287,7 @@ static inline const char *phy_modes(phy_ - #define PHY_INIT_TIMEOUT 100000 - #define PHY_FORCE_TIMEOUT 10 - --#define PHY_MAX_ADDR 32 -+#define PHY_MAX_ADDR 64 - - /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ - #define PHY_ID_FMT "%s:%02x" diff --git a/target/linux/realtek/patches-5.15/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch b/target/linux/realtek/patches-5.15/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch deleted file mode 100644 index 378563a9e3..0000000000 --- a/target/linux/realtek/patches-5.15/710-net-phy-sfp-re-probe-modules-on-DEV_UP-event.patch +++ /dev/null @@ -1,26 +0,0 @@ -From a381ac0aa281fdb0b41a39d8a2bc08fd88f6db92 Mon Sep 17 00:00:00 2001 -From: Antoine Tenart -Date: Tue, 25 Feb 2020 16:32:37 +0100 -Subject: [PATCH 1/3] net: phy: sfp: re-probe modules on DEV_UP event - -Signed-off-by: Antoine Tenart ---- - drivers/net/phy/sfp.c | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -2160,6 +2160,13 @@ static void sfp_sm_module(struct sfp *sf - return; - } - -+ /* Re-probe the SFP modules when an interface is brought up, as the MAC -+ * do not report its link status (This means Phylink wouldn't be -+ * triggered if the PHY had a link before a MAC is brought up). -+ */ -+ if (event == SFP_E_DEV_UP && sfp->sm_mod_state == SFP_MOD_PRESENT) -+ sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL); -+ - switch (sfp->sm_mod_state) { - default: - if (event == SFP_E_INSERT) { diff --git a/target/linux/realtek/patches-5.15/711-net-phy-add-an-MDIO-SMBus-library.patch b/target/linux/realtek/patches-5.15/711-net-phy-add-an-MDIO-SMBus-library.patch deleted file mode 100644 index 767a5d8ec5..0000000000 --- a/target/linux/realtek/patches-5.15/711-net-phy-add-an-MDIO-SMBus-library.patch +++ /dev/null @@ -1,148 +0,0 @@ -From d585c55b9f70cf9e8c66820d7efe7130c683f19e Mon Sep 17 00:00:00 2001 -From: Antoine Tenart -Date: Fri, 21 Feb 2020 11:51:27 +0100 -Subject: [PATCH 2/3] net: phy: add an MDIO SMBus library - -Signed-off-by: Antoine Tenart ---- - drivers/net/mdio/Kconfig | 11 +++++++ - drivers/net/mdio/Makefile | 1 + - drivers/net/mdio/mdio-smbus.c | 62 +++++++++++++++++++++++++++++++++++ - drivers/net/phy/Kconfig | 1 + - include/linux/mdio/mdio-i2c.h | 16 +++++++++ - 5 files changed, 91 insertions(+) - create mode 100644 drivers/net/mdio/mdio-smbus.c - ---- a/drivers/net/mdio/Kconfig -+++ b/drivers/net/mdio/Kconfig -@@ -54,6 +54,17 @@ config MDIO_SUN4I - interface units of the Allwinner SoC that have an EMAC (A10, - A12, A10s, etc.) - -+config MDIO_SMBUS -+ tristate -+ depends on I2C_SMBUS -+ help -+ Support SMBus based PHYs. This provides a MDIO bus bridged -+ to SMBus to allow PHYs connected in SMBus mode to be accessed -+ using the existing infrastructure. -+ -+ This is library mode. -+ -+ - config MDIO_XGENE - tristate "APM X-Gene SoC MDIO bus controller" - depends on ARCH_XGENE || COMPILE_TEST ---- a/drivers/net/mdio/Makefile -+++ b/drivers/net/mdio/Makefile -@@ -19,6 +19,7 @@ obj-$(CONFIG_MDIO_MOXART) += mdio-moxar - obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o - obj-$(CONFIG_MDIO_MVUSB) += mdio-mvusb.o - obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o -+obj-$(CONFIG_MDIO_SMBUS) += mdio-smbus.o - obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o - obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o - obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o ---- /dev/null -+++ b/drivers/net/mdio/mdio-smbus.c -@@ -0,0 +1,62 @@ -+// SPDX-License-Identifier: GPL-2.0-or-later -+/* -+ * MDIO SMBus bridge -+ * -+ * Copyright (C) 2020 Antoine Tenart -+ * -+ * Network PHYs can appear on SMBus when they are part of SFP modules. -+ */ -+#include -+#include -+#include -+ -+static int smbus_mii_read(struct mii_bus *mii, int phy_id, int reg) -+{ -+ struct i2c_adapter *i2c = mii->priv; -+ union i2c_smbus_data data; -+ int ret; -+ -+ ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, I2C_SMBUS_READ, -+ reg, I2C_SMBUS_BYTE_DATA, &data); -+ if (ret < 0) -+ return 0xff; -+ -+ return data.byte; -+} -+ -+static int smbus_mii_write(struct mii_bus *mii, int phy_id, int reg, u16 val) -+{ -+ struct i2c_adapter *i2c = mii->priv; -+ union i2c_smbus_data data; -+ int ret; -+ -+ data.byte = val; -+ -+ ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, I2C_SMBUS_WRITE, -+ reg, I2C_SMBUS_BYTE_DATA, &data); -+ return ret < 0 ? ret : 0; -+} -+ -+struct mii_bus *mdio_smbus_alloc(struct device *parent, struct i2c_adapter *i2c) -+{ -+ struct mii_bus *mii; -+ -+ if (!i2c_check_functionality(i2c, I2C_FUNC_SMBUS_BYTE_DATA)) -+ return ERR_PTR(-EINVAL); -+ -+ mii = mdiobus_alloc(); -+ if (!mii) -+ return ERR_PTR(-ENOMEM); -+ -+ snprintf(mii->id, MII_BUS_ID_SIZE, "smbus:%s", dev_name(parent)); -+ mii->parent = parent; -+ mii->read = smbus_mii_read; -+ mii->write = smbus_mii_write; -+ mii->priv = i2c; -+ -+ return mii; -+} -+ -+MODULE_AUTHOR("Antoine Tenart"); -+MODULE_DESCRIPTION("MDIO SMBus bridge library"); -+MODULE_LICENSE("GPL"); ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -61,6 +61,7 @@ config SFP - depends on I2C && PHYLINK - depends on HWMON || HWMON=n - select MDIO_I2C -+ select MDIO_SMBUS - - comment "Switch configuration API + drivers" - ---- a/include/linux/mdio/mdio-i2c.h -+++ b/include/linux/mdio/mdio-i2c.h -@@ -12,5 +12,8 @@ struct i2c_adapter; - struct mii_bus; - - struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c); -+struct mii_bus *mdio_smbus_alloc(struct device *parent, struct i2c_adapter *i2c); -+bool i2c_mii_valid_phy_id(int phy_id); -+unsigned int i2c_mii_phy_addr(int phy_id); - - #endif ---- a/drivers/net/mdio/mdio-i2c.c -+++ b/drivers/net/mdio/mdio-i2c.c -@@ -18,12 +18,12 @@ - * specified to be present in SFP modules. These correspond with PHY - * addresses 16 and 17. Disallow access to these "phy" addresses. - */ --static bool i2c_mii_valid_phy_id(int phy_id) -+bool i2c_mii_valid_phy_id(int phy_id) - { - return phy_id != 0x10 && phy_id != 0x11; - } - --static unsigned int i2c_mii_phy_addr(int phy_id) -+unsigned int i2c_mii_phy_addr(int phy_id) - { - return phy_id + 0x40; - } diff --git a/target/linux/realtek/patches-5.15/712-net-phy-sfp-add-support-for-SMBus.patch b/target/linux/realtek/patches-5.15/712-net-phy-sfp-add-support-for-SMBus.patch deleted file mode 100644 index 53ec0fa1da..0000000000 --- a/target/linux/realtek/patches-5.15/712-net-phy-sfp-add-support-for-SMBus.patch +++ /dev/null @@ -1,99 +0,0 @@ -From 3cb0bde365d913c484d20224367a54a0eac780a7 Mon Sep 17 00:00:00 2001 -From: Antoine Tenart -Date: Fri, 21 Feb 2020 11:55:29 +0100 -Subject: [PATCH 3/3] net: phy: sfp: add support for SMBus - -Signed-off-by: Antoine Tenart ---- - drivers/net/phy/sfp.c | 68 ++++++++++++++++++++++++++++++++++--------- - 1 file changed, 54 insertions(+), 14 deletions(-) - ---- a/drivers/net/phy/sfp.c -+++ b/drivers/net/phy/sfp.c -@@ -556,32 +556,72 @@ static int sfp_i2c_write(struct sfp *sfp - return ret == ARRAY_SIZE(msgs) ? len : 0; - } - -+static int sfp_smbus_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, -+ size_t len) -+{ -+ u8 bus_addr = a2 ? 0x51 : 0x50, *val = buf; -+ -+ bus_addr -= 0x40; -+ -+ while (len > 0) { -+ *val = sfp->i2c_mii->read(sfp->i2c_mii, bus_addr, dev_addr); -+ -+ val++; -+ dev_addr++; -+ len--; -+ } -+ -+ return val - (u8 *)buf; -+} -+ -+static int sfp_smbus_write(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, -+ size_t len) -+{ -+ u8 bus_addr = a2 ? 0x51 : 0x50; -+ u16 val; -+ -+ memcpy(&val, buf, len); -+ -+ return sfp->i2c_mii->write(sfp->i2c_mii, bus_addr, dev_addr, val); -+} -+ - static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c) - { -- struct mii_bus *i2c_mii; -+ struct mii_bus *mii; - int ret; - -- if (!i2c_check_functionality(i2c, I2C_FUNC_I2C)) -- return -EINVAL; -- - sfp->i2c = i2c; -- sfp->read = sfp_i2c_read; -- sfp->write = sfp_i2c_write; - -- i2c_mii = mdio_i2c_alloc(sfp->dev, i2c); -- if (IS_ERR(i2c_mii)) -- return PTR_ERR(i2c_mii); -+ if (i2c_check_functionality(i2c, I2C_FUNC_I2C)) { -+ sfp->read = sfp_i2c_read; -+ sfp->write = sfp_i2c_write; -+ -+ mii = mdio_i2c_alloc(sfp->dev, i2c); -+ if (IS_ERR(mii)) -+ return PTR_ERR(mii); -+ -+ mii->name = "SFP I2C Bus"; -+ } else if (i2c_check_functionality(i2c, I2C_FUNC_SMBUS_BYTE_DATA)) { -+ sfp->read = sfp_smbus_read; -+ sfp->write = sfp_smbus_write; -+ -+ mii = mdio_smbus_alloc(sfp->dev, i2c); -+ if (IS_ERR(mii)) -+ return PTR_ERR(mii); - -- i2c_mii->name = "SFP I2C Bus"; -- i2c_mii->phy_mask = ~0; -+ mii->name = "SFP SMBus"; -+ } else { -+ return -EINVAL; -+ } - -- ret = mdiobus_register(i2c_mii); -+ mii->phy_mask = ~0; -+ ret = mdiobus_register(mii); - if (ret < 0) { -- mdiobus_free(i2c_mii); -+ mdiobus_free(mii); - return ret; - } - -- sfp->i2c_mii = i2c_mii; -+ sfp->i2c_mii = mii; - - return 0; - } diff --git a/target/linux/realtek/rtl838x/config-5.15 b/target/linux/realtek/rtl838x/config-5.15 deleted file mode 100644 index ad2c1b43cc..0000000000 --- a/target/linux/realtek/rtl838x/config-5.15 +++ /dev/null @@ -1,224 +0,0 @@ -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BMIPS_CPUFREQ is not set -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_REALTEK=y -CONFIG_COMMON_CLK_RTL83XX=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15 -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_CPUFREQ=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_DEBUG_SECTION_MISMATCH=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EARLY_PRINTK_8250=y -CONFIG_EXTRA_FIRMWARE="rtl838x_phy/rtl838x_8214fc.fw rtl838x_phy/rtl838x_8218b.fw rtl838x_phy/rtl838x_8380.fw" -CONFIG_EXTRA_FIRMWARE_DIR="firmware" -CONFIG_FIXED_PHY=y -CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_PCA953X_IRQ=y -CONFIG_GPIO_REALTEK_OTTO=y -CONFIG_GPIO_RTL8231=y -CONFIG_GPIO_WATCHDOG=y -# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set -CONFIG_GRO_CELLS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HWMON=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_I2C_MUX=y -# CONFIG_I2C_MUX_RTL9300 is not set -# CONFIG_I2C_RTL9300 is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_JFFS2_ZLIB=y -CONFIG_LEDS_GPIO=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_I2C=y -CONFIG_MDIO_SMBUS=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -CONFIG_MIPS_EBPF_JIT=y -CONFIG_MIPS_EXTERNAL_TIMER=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_BRNIMAGE_FW=y -CONFIG_MTD_SPLIT_EVA_FW=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_H3C_VFS=y -CONFIG_MTD_SPLIT_TPLINK_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_VIRT_CONCAT=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_RTL83XX=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_NET_RTL838X=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NO_EXCEPT_FILL=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PINCTRL=y -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO_RESTART=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_RATIONAL=y -CONFIG_REALTEK_OTTO_TIMER=y -CONFIG_REALTEK_OTTO_WDT=y -CONFIG_REALTEK_PHY=y -CONFIG_REALTEK_SOC_PHY=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RTL838X=y -# CONFIG_RTL839X is not set -CONFIG_RTL83XX=y -# CONFIG_RTL930X is not set -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SFP=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SRAM=y -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/realtek/rtl839x/config-5.15 b/target/linux/realtek/rtl839x/config-5.15 deleted file mode 100644 index c8d841c01e..0000000000 --- a/target/linux/realtek/rtl839x/config-5.15 +++ /dev/null @@ -1,244 +0,0 @@ -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BMIPS_CPUFREQ is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_REALTEK=y -CONFIG_COMMON_CLK_RTL83XX=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15 -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_MIPSR2_IRQ_EI=y -CONFIG_CPU_MIPSR2_IRQ_VI=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_CPUFREQ=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_DEBUG_SECTION_MISMATCH=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EARLY_PRINTK_8250=y -CONFIG_FIXED_PHY=y -CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_PCA953X_IRQ=y -CONFIG_GPIO_REALTEK_OTTO=y -CONFIG_GPIO_RTL8231=y -CONFIG_GPIO_WATCHDOG=y -# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set -CONFIG_GRO_CELLS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HWMON=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_GPIO=y -# CONFIG_I2C_RTL9300 is not set -# CONFIG_I2C_MUX_RTL9300 is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_JFFS2_ZLIB=y -CONFIG_LEDS_GPIO=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_I2C=y -CONFIG_MDIO_SMBUS=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -CONFIG_MIPS_EBPF_JIT=y -CONFIG_MIPS_EXTERNAL_TIMER=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -CONFIG_MIPS_MT=y -# CONFIG_MIPS_MT_FPAFF is not set -CONFIG_MIPS_MT_SMP=y -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_NR_CPU_NR_MAP=2 -CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_BRNIMAGE_FW=y -CONFIG_MTD_SPLIT_EVA_FW=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_H3C_VFS=y -CONFIG_MTD_SPLIT_TPLINK_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_VIRT_CONCAT=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_RTL83XX=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_RTL838X=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NO_EXCEPT_FILL=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_NR_CPUS=2 -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_PADATA=y -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PINCTRL=y -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO_RESTART=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_RATIONAL=y -CONFIG_REALTEK_OTTO_TIMER=y -CONFIG_REALTEK_OTTO_WDT=y -CONFIG_REALTEK_PHY=y -CONFIG_REALTEK_SOC_PHY=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -# CONFIG_RTL838X is not set -CONFIG_RTL839X=y -CONFIG_RTL83XX=y -# CONFIG_RTL930X is not set -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SFP=y -CONFIG_SMP=y -CONFIG_SMP_UP=y -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SRAM=y -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SYNC_R4K=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -CONFIG_SYS_SUPPORTS_SCHED_SMT=y -CONFIG_SYS_SUPPORTS_SMP=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/realtek/rtl930x/config-5.15 b/target/linux/realtek/rtl930x/config-5.15 deleted file mode 100644 index af5f2ca7a3..0000000000 --- a/target/linux/realtek/rtl930x/config-5.15 +++ /dev/null @@ -1,205 +0,0 @@ -CONFIG_AQUANTIA_PHY=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BOARD_SCACHE=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -# CONFIG_COMMON_CLK_REALTEK is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15 -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_DEBUG_SECTION_MISMATCH=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EARLY_PRINTK_8250=y -CONFIG_FIXED_PHY=y -CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_REALTEK_OTTO=y -CONFIG_GPIO_RTL8231=y -CONFIG_GRO_CELLS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HWMON=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_RTL9300=y -CONFIG_I2C_RTL9300=y -CONFIG_I2C_SMBUS=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_JFFS2_ZLIB=y -CONFIG_LEDS_GPIO=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_I2C=y -CONFIG_MDIO_SMBUS=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -CONFIG_MIPS_CPU_SCACHE=y -CONFIG_MIPS_EBPF_JIT=y -CONFIG_MIPS_EXTERNAL_TIMER=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_BRNIMAGE_FW=y -CONFIG_MTD_SPLIT_EVA_FW=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_TPLINK_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_RTL83XX=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_NET_RTL838X=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NO_EXCEPT_FILL=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PINCTRL=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO_RESTART=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_RATIONAL=y -CONFIG_REALTEK_OTTO_TIMER=y -CONFIG_REALTEK_OTTO_WDT=y -CONFIG_REALTEK_PHY=y -CONFIG_REALTEK_SOC_PHY=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -# CONFIG_RTL838X is not set -# CONFIG_RTL839X is not set -CONFIG_RTL83XX=y -CONFIG_RTL930X=y -# CONFIG_RTL931X is not set -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SFP=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/realtek/rtl931x/config-5.15 b/target/linux/realtek/rtl931x/config-5.15 deleted file mode 100644 index 2da27941c7..0000000000 --- a/target/linux/realtek/rtl931x/config-5.15 +++ /dev/null @@ -1,241 +0,0 @@ -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BOARD_SCACHE=y -CONFIG_CEVT_RTL9300=y -CONFIG_CLKSRC_MIPS_GIC=y -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -# CONFIG_COMMON_CLK_REALTEK is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15 -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_MIPSR2_IRQ_EI=y -CONFIG_CPU_MIPSR2_IRQ_VI=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_CSRC_R4K=y -CONFIG_DEBUG_SECTION_MISMATCH=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_EARLY_PRINTK_8250=y -CONFIG_FIXED_PHY=y -CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_REALTEK_OTTO=y -CONFIG_GPIO_RTL8231=y -CONFIG_GRO_CELLS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HIGHMEM=y -CONFIG_HWMON=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_I2C_MUX=y -CONFIG_I2C_MUX_RTL9300=y -CONFIG_I2C_RTL9300=y -CONFIG_I2C_SMBUS=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_JFFS2_ZLIB=y -CONFIG_KMAP_LOCAL=y -CONFIG_LEDS_GPIO=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_I2C=y -CONFIG_MDIO_SMBUS=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CLOCK_VSYSCALL=y -CONFIG_MIPS_CM=y -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -CONFIG_MIPS_CPC=y -CONFIG_MIPS_CPS=y -# CONFIG_MIPS_CPS_NS16550_BOOL is not set -CONFIG_MIPS_CPU_SCACHE=y -CONFIG_MIPS_EBPF_JIT=y -CONFIG_MIPS_GIC=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -CONFIG_MIPS_MT=y -CONFIG_MIPS_MT_FPAFF=y -CONFIG_MIPS_MT_SMP=y -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_NR_CPU_NR_MAP=2 -CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_BRNIMAGE_FW=y -CONFIG_MTD_SPLIT_EVA_FW=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_TPLINK_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_RTL83XX=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_RTL838X=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NO_EXCEPT_FILL=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_NR_CPUS=2 -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_PADATA=y -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PINCTRL=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_SYSCON=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_RATIONAL=y -# CONFIG_REALTEK_OTTO_TIMER is not set -CONFIG_REALTEK_OTTO_WDT=y -# CONFIG_REALTEK_PHY is not set -CONFIG_REALTEK_SOC_PHY=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -# CONFIG_RTL838X is not set -# CONFIG_RTL839X is not set -CONFIG_RTL83XX=y -CONFIG_RTL930X=y -CONFIG_RTL931X=y -CONFIG_SENSORS_GPIO_FAN=y -CONFIG_SENSORS_LM75=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SFP=y -CONFIG_SMP=y -CONFIG_SMP_UP=y -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SYNC_R4K=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_MIPS_CPS=y -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -CONFIG_SYS_SUPPORTS_SCHED_SMT=y -CONFIG_SYS_SUPPORTS_SMP=y -CONFIG_SYS_SUPPORTS_VPE_LOADER=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y -CONFIG_WEAK_ORDERING=y -CONFIG_XPS=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -- 2.30.2