From 3af3bebc215428aba3c7fd176d7f146045d51d68 Mon Sep 17 00:00:00 2001 From: Breno Matheus Lima Date: Wed, 10 Oct 2018 01:10:31 +0000 Subject: [PATCH] doc: imx: Move SPD related info to the appropriate doc Currently the Serial Download Protocol tools and procedure are documented in two places: - doc/imx/README.sdp - doc/imx/README.imx6 It is better to consolidate all SDP related information into README.sdp file, so move the content from README.imx6 to README.sdp. Signed-off-by: Breno Lima --- doc/imx/README.imx6 | 25 ------------------------- doc/imx/README.sdp | 22 ++++++++++++++++++++-- 2 files changed, 20 insertions(+), 27 deletions(-) diff --git a/doc/imx/README.imx6 b/doc/imx/README.imx6 index b0644f8491..eab88353f6 100644 --- a/doc/imx/README.imx6 +++ b/doc/imx/README.imx6 @@ -88,28 +88,3 @@ Reading bank 4: Word 0x00000002: 9f027772 00000004 -2. Using imx_usb_loader for first install with SPL --------------------------------------------------- - -imx_usb_loader is a very nice tool by Boundary Devices that -allow to install U-Boot without a JTAG debugger, using -the USB boot mode as described in the manual. It is -a replacement for Freescale's MFGTOOLS. - -The sources can be found here: - - https://github.com/boundarydevices/imx_usb_loader.git - -Booting in USB mode, the i.MX6 announces itself to the Linux Host as: - -Bus 001 Device 111: ID 15a2:0061 Freescale Semiconductor, Inc. - -imx_usb_loader is able to download a single file (u-boot.imx) -to the board. For boards without SPL support, it is enough to -issue the command: - - sudo ../imx_usb_loader/imx_usb -v u-boot.imx - -In order to load SPL and u-boot.img via imx_usb_loader tool, -please refer to doc/README.sdp. - diff --git a/doc/imx/README.sdp b/doc/imx/README.sdp index 178ea688a7..6ea6e41395 100644 --- a/doc/imx/README.sdp +++ b/doc/imx/README.sdp @@ -16,14 +16,19 @@ protocols allow to access a USB device without OS specific drivers. The U-Boot implementation has primarly been tested using the open source imx_loader utility (https://github.com/boundarydevices/imx_usb_loader). +imx_usb_loader is a very nice tool by Boundary Devices that allow to +install U-Boot without a JTAG debugger, using the USB boot mode as +described in the manual. It is a replacement for Freescale's +MFGTOOLS. + The host side utilities are typically capable to interpret the i.MX specific image header (see doc/README.imximage). There are extensions for imx_loader's imx_usb utility which allow to interpret the U-Boot specific legacy image format (see mkimage(1)). Also the U-Boot side support beside the i.MX specific header the U-Boot legacy header. -Usage ------ +1. Using imx_usb_loader for first install with SPL +-------------------------------------------------- This implementation can be started in U-Boot using the sdp command (CONFIG_CMD_USB_SDP) or in SPL if Serial Downloader boot mode has been @@ -98,3 +103,16 @@ With that SPL and U-Boot can be downloaded with a single invocation of imx_usb without arguments: # imx_usb + +2. Using imx_usb_loader non-SPL images +--------------------------------------- + +Booting in USB mode, the i.MX6 announces itself to the Linux Host as: + +Bus 001 Device 111: ID 15a2:0061 Freescale Semiconductor, Inc. + +imx_usb_loader is able to download a single file (u-boot.imx) +to the board. For boards without SPL support, it is enough to +issue the command: + + sudo ../imx_usb_loader/imx_usb -v u-boot.imx -- 2.30.2