From 3a9465fa2dc42a8ebc2fe9144f4dfa23d5899f85 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 7 Mar 2012 09:31:43 +0100 Subject: [PATCH] serial i.MX: do not depend on grouped clocks the current i.MX clock support groups together unrelated clocks to a single clock which is then used by the driver. This can't be accomplished with the generic clock framework so we instead request the individual clocks in the driver. For i.MX there are generally three different clocks: ipg: bus clock (needed to access registers) ahb: dma relevant clock, sometimes referred to as hclk in the datasheet per: bit clock, pixel clock This patch changes the driver to request the individual clocks. Currently all clk_get will get the same clock until the SoCs are converted to the generic clock framework Signed-off-by: Sascha Hauer --- drivers/tty/serial/imx.c | 38 +++++++++++++++++++++++--------------- 1 file changed, 23 insertions(+), 15 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index e7feceeebc2f..267ec6da5af2 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -204,7 +204,8 @@ struct imx_port { unsigned int irda_inv_rx:1; unsigned int irda_inv_tx:1; unsigned short trcv_delay; /* transceiver delay */ - struct clk *clk; + struct clk *clk_ipg; + struct clk *clk_per; struct imx_uart_data *devdata; }; @@ -672,7 +673,7 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) * RFDIV is set such way to satisfy requested uartclk value */ val = TXTL << 10 | RXTL; - ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2) + ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2) / sport->port.uartclk; if(!ufcr_rfdiv) @@ -1285,7 +1286,7 @@ imx_console_get_options(struct imx_port *sport, int *baud, else ucfr_rfdiv = 6 - ucfr_rfdiv; - uartclk = clk_get_rate(sport->clk); + uartclk = clk_get_rate(sport->clk_per); uartclk /= ucfr_rfdiv; { /* @@ -1503,14 +1504,22 @@ static int serial_imx_probe(struct platform_device *pdev) sport->timer.function = imx_timeout; sport->timer.data = (unsigned long)sport; - sport->clk = clk_get(&pdev->dev, "uart"); - if (IS_ERR(sport->clk)) { - ret = PTR_ERR(sport->clk); + sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(sport->clk_ipg)) { + ret = PTR_ERR(sport->clk_ipg); goto unmap; } - clk_prepare_enable(sport->clk); - sport->port.uartclk = clk_get_rate(sport->clk); + sport->clk_per = devm_clk_get(&pdev->dev, "per"); + if (IS_ERR(sport->clk_per)) { + ret = PTR_ERR(sport->clk_per); + goto unmap; + } + + clk_prepare_enable(sport->clk_per); + clk_prepare_enable(sport->clk_ipg); + + sport->port.uartclk = clk_get_rate(sport->clk_per); imx_ports[sport->port.line] = sport; @@ -1531,8 +1540,8 @@ deinit: if (pdata && pdata->exit) pdata->exit(pdev); clkput: - clk_disable_unprepare(sport->clk); - clk_put(sport->clk); + clk_disable_unprepare(sport->clk_per); + clk_disable_unprepare(sport->clk_ipg); unmap: iounmap(sport->port.membase); free: @@ -1550,11 +1559,10 @@ static int serial_imx_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); - if (sport) { - uart_remove_one_port(&imx_reg, &sport->port); - clk_disable_unprepare(sport->clk); - clk_put(sport->clk); - } + uart_remove_one_port(&imx_reg, &sport->port); + + clk_disable_unprepare(sport->clk_per); + clk_disable_unprepare(sport->clk_ipg); if (pdata && pdata->exit) pdata->exit(pdev); -- 2.30.2