From 3a078876caee9634dbb9b41e6269262e30e8b535 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 25 Jun 2008 22:35:28 -0400 Subject: [PATCH] ath5k: convert LED code to use mac80211 triggers This change cleans up the ath5k LED code and converts it to use the standard LED device class along with the rx/tx LED triggers provided by mac80211. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/Kconfig | 3 + drivers/net/wireless/ath5k/base.c | 251 +++++++++++++---------------- drivers/net/wireless/ath5k/base.h | 32 ++-- 3 files changed, 132 insertions(+), 154 deletions(-) diff --git a/drivers/net/wireless/ath5k/Kconfig b/drivers/net/wireless/ath5k/Kconfig index f1f2aea2eab4..75383a5df992 100644 --- a/drivers/net/wireless/ath5k/Kconfig +++ b/drivers/net/wireless/ath5k/Kconfig @@ -1,6 +1,9 @@ config ATH5K tristate "Atheros 5xxx wireless cards support" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL + select MAC80211_LEDS + select LEDS_CLASS + select NEW_LEDS ---help--- This module adds support for wireless adapters based on Atheros 5xxx chipset. diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 010c66555950..a80a3a4744ab 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -58,11 +58,6 @@ #include "reg.h" #include "debug.h" -enum { - ATH_LED_TX, - ATH_LED_RX, -}; - static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */ @@ -309,13 +304,10 @@ static void ath5k_tasklet_reset(unsigned long data); static void ath5k_calibrate(unsigned long data); /* LED functions */ -static void ath5k_led_off(unsigned long data); -static void ath5k_led_blink(struct ath5k_softc *sc, - unsigned int on, - unsigned int off); -static void ath5k_led_event(struct ath5k_softc *sc, - int event); - +static int ath5k_init_leds(struct ath5k_softc *sc); +static void ath5k_led_enable(struct ath5k_softc *sc); +static void ath5k_led_off(struct ath5k_softc *sc); +static void ath5k_unregister_leds(struct ath5k_softc *sc); /* * Module init/exit functions @@ -596,8 +588,7 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state) struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath5k_softc *sc = hw->priv; - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) - ath5k_hw_set_gpio(sc->ah, sc->led_pin, 1); + ath5k_led_off(sc); ath5k_stop_hw(sc); pci_save_state(pdev); @@ -632,10 +623,7 @@ ath5k_pci_resume(struct pci_dev *pdev) pci_write_config_byte(pdev, 0x41, 0); ath5k_init(sc); - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - ath5k_hw_set_gpio_output(ah, sc->led_pin); - ath5k_hw_set_gpio(ah, sc->led_pin, 0); - } + ath5k_led_enable(sc); /* * Reset the key cache since some parts do not @@ -742,27 +730,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc); tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc); setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc); - setup_timer(&sc->led_tim, ath5k_led_off, (unsigned long)sc); - - sc->led_on = 0; /* low true */ - /* - * Auto-enable soft led processing for IBM cards and for - * 5211 minipci cards. - */ - if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM || - pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { - __set_bit(ATH_STAT_LEDSOFT, sc->status); - sc->led_pin = 0; - } - /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ - if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { - __set_bit(ATH_STAT_LEDSOFT, sc->status); - sc->led_pin = 0; - } - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - ath5k_hw_set_gpio_output(ah, sc->led_pin); - ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on); - } ath5k_hw_get_lladdr(ah, mac); SET_IEEE80211_PERM_ADDR(hw, mac); @@ -776,6 +743,8 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) goto err_queues; } + ath5k_init_leds(sc); + return 0; err_queues: ath5k_txq_release(sc); @@ -809,6 +778,7 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw) ath5k_desc_free(sc, pdev); ath5k_txq_release(sc); ath5k_hw_release_tx_queue(sc->ah, sc->bhalq); + ath5k_unregister_leds(sc); /* * NB: can't reclaim these until after ieee80211_ifdetach @@ -1060,65 +1030,9 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) return 0; } -/* - * TODO: CLEAN THIS !!! - */ static void ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) { - if (unlikely(test_bit(ATH_STAT_LEDSOFT, sc->status))) { - /* from Atheros NDIS driver, w/ permission */ - static const struct { - u16 rate; /* tx/rx 802.11 rate */ - u16 timeOn; /* LED on time (ms) */ - u16 timeOff; /* LED off time (ms) */ - } blinkrates[] = { - { 108, 40, 10 }, - { 96, 44, 11 }, - { 72, 50, 13 }, - { 48, 57, 14 }, - { 36, 67, 16 }, - { 24, 80, 20 }, - { 22, 100, 25 }, - { 18, 133, 34 }, - { 12, 160, 40 }, - { 10, 200, 50 }, - { 6, 240, 58 }, - { 4, 267, 66 }, - { 2, 400, 100 }, - { 0, 500, 130 } - }; - const struct ath5k_rate_table *rt = - ath5k_hw_get_rate_table(sc->ah, mode); - unsigned int i, j; - - BUG_ON(rt == NULL); - - memset(sc->hwmap, 0, sizeof(sc->hwmap)); - for (i = 0; i < 32; i++) { - u8 ix = rt->rate_code_to_index[i]; - if (ix == 0xff) { - sc->hwmap[i].ledon = msecs_to_jiffies(500); - sc->hwmap[i].ledoff = msecs_to_jiffies(130); - continue; - } - sc->hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD; - /* receive frames include FCS */ - sc->hwmap[i].rxflags = sc->hwmap[i].txflags | - IEEE80211_RADIOTAP_F_FCS; - /* setup blink rate table to avoid per-packet lookup */ - for (j = 0; j < ARRAY_SIZE(blinkrates) - 1; j++) - if (blinkrates[j].rate == /* XXX why 7f? */ - (rt->rates[ix].dot11_rate&0x7f)) - break; - - sc->hwmap[i].ledon = msecs_to_jiffies(blinkrates[j]. - timeOn); - sc->hwmap[i].ledoff = msecs_to_jiffies(blinkrates[j]. - timeOff); - } - } - sc->curmode = mode; if (mode == AR5K_MODE_11A) { @@ -1900,8 +1814,6 @@ accept: ath5k_check_ibss_tsf(sc, skb, &rxs); __ieee80211_rx(sc->hw, skb, &rxs); - sc->led_rxrate = rs.rs_rate; - ath5k_led_event(sc, ATH_LED_RX); next: list_move_tail(&bf->list, &sc->rxbuf); } while (ath5k_rxbuf_setup(sc, bf) == 0); @@ -1982,13 +1894,9 @@ ath5k_tasklet_tx(unsigned long data) struct ath5k_softc *sc = (void *)data; ath5k_tx_processq(sc, sc->txq); - - ath5k_led_event(sc, ATH_LED_TX); } - - /*****************\ * Beacon handling * \*****************/ @@ -2363,11 +2271,7 @@ ath5k_stop_locked(struct ath5k_softc *sc) ieee80211_stop_queues(sc->hw); if (!test_bit(ATH_STAT_INVALID, sc->status)) { - if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { - del_timer_sync(&sc->led_tim); - ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on); - __clear_bit(ATH_STAT_LEDBLINKING, sc->status); - } + ath5k_led_off(sc); ath5k_hw_set_intr(ah, 0); } ath5k_txq_cleanup(sc); @@ -2563,54 +2467,123 @@ ath5k_calibrate(unsigned long data) \***************/ static void -ath5k_led_off(unsigned long data) +ath5k_led_enable(struct ath5k_softc *sc) { - struct ath5k_softc *sc = (void *)data; - - if (test_bit(ATH_STAT_LEDENDBLINK, sc->status)) - __clear_bit(ATH_STAT_LEDBLINKING, sc->status); - else { - __set_bit(ATH_STAT_LEDENDBLINK, sc->status); - ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on); - mod_timer(&sc->led_tim, jiffies + sc->led_off); + if (test_bit(ATH_STAT_LEDSOFT, sc->status)) { + ath5k_hw_set_gpio_output(sc->ah, sc->led_pin); + ath5k_led_off(sc); } } -/* - * Blink the LED according to the specified on/off times. - */ static void -ath5k_led_blink(struct ath5k_softc *sc, unsigned int on, - unsigned int off) +ath5k_led_on(struct ath5k_softc *sc) { - ATH5K_DBG(sc, ATH5K_DEBUG_LED, "on %u off %u\n", on, off); + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) + return; ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on); - __set_bit(ATH_STAT_LEDBLINKING, sc->status); - __clear_bit(ATH_STAT_LEDENDBLINK, sc->status); - sc->led_off = off; - mod_timer(&sc->led_tim, jiffies + on); } static void -ath5k_led_event(struct ath5k_softc *sc, int event) +ath5k_led_off(struct ath5k_softc *sc) { - if (likely(!test_bit(ATH_STAT_LEDSOFT, sc->status))) + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) return; - if (unlikely(test_bit(ATH_STAT_LEDBLINKING, sc->status))) - return; /* don't interrupt active blink */ - switch (event) { - case ATH_LED_TX: - ath5k_led_blink(sc, sc->hwmap[sc->led_txrate].ledon, - sc->hwmap[sc->led_txrate].ledoff); - break; - case ATH_LED_RX: - ath5k_led_blink(sc, sc->hwmap[sc->led_rxrate].ledon, - sc->hwmap[sc->led_rxrate].ledoff); - break; + ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on); +} + +static void +ath5k_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct ath5k_led *led = container_of(led_dev, struct ath5k_led, + led_dev); + + if (brightness == LED_OFF) + ath5k_led_off(led->sc); + else + ath5k_led_on(led->sc); +} + +static int +ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led, + const char *name, char *trigger) +{ + int err; + + led->sc = sc; + strncpy(led->name, name, sizeof(led->name)); + led->led_dev.name = led->name; + led->led_dev.default_trigger = trigger; + led->led_dev.brightness_set = ath5k_led_brightness_set; + + err = led_classdev_register(&sc->pdev->dev, &led->led_dev); + if (err) + { + ATH5K_WARN(sc, "could not register LED %s\n", name); + led->sc = NULL; } + return err; +} + +static void +ath5k_unregister_led(struct ath5k_led *led) +{ + if (!led->sc) + return; + led_classdev_unregister(&led->led_dev); + ath5k_led_off(led->sc); + led->sc = NULL; +} + +static void +ath5k_unregister_leds(struct ath5k_softc *sc) +{ + ath5k_unregister_led(&sc->rx_led); + ath5k_unregister_led(&sc->tx_led); } +static int +ath5k_init_leds(struct ath5k_softc *sc) +{ + int ret = 0; + struct ieee80211_hw *hw = sc->hw; + struct pci_dev *pdev = sc->pdev; + char name[ATH5K_LED_MAX_NAME_LEN + 1]; + + sc->led_on = 0; /* active low */ + + /* + * Auto-enable soft led processing for IBM cards and for + * 5211 minipci cards. + */ + if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM || + pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { + __set_bit(ATH_STAT_LEDSOFT, sc->status); + sc->led_pin = 0; + } + /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ + if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { + __set_bit(ATH_STAT_LEDSOFT, sc->status); + sc->led_pin = 1; + } + if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) + goto out; + + ath5k_led_enable(sc); + + snprintf(name, sizeof(name), "ath5k-%s::rx", wiphy_name(hw->wiphy)); + ret = ath5k_register_led(sc, &sc->rx_led, name, + ieee80211_get_rx_led_name(hw)); + if (ret) + goto out; + + snprintf(name, sizeof(name), "ath5k-%s::tx", wiphy_name(hw->wiphy)); + ret = ath5k_register_led(sc, &sc->tx_led, name, + ieee80211_get_tx_led_name(hw)); +out: + return ret; +} /********************\ @@ -2648,8 +2621,6 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) memmove(skb->data, skb->data+pad, hdrlen); } - sc->led_txrate = ieee80211_get_tx_rate(hw, info)->hw_value; - spin_lock_irqsave(&sc->txbuflock, flags); if (list_empty(&sc->txbuf)) { ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index bb4b26d523ab..47f414b09e67 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -45,6 +45,7 @@ #include #include #include +#include #include "ath5k.h" #include "debug.h" @@ -79,6 +80,19 @@ struct ath5k_txq { bool setup; }; +#define ATH5K_LED_MAX_NAME_LEN 31 + +/* + * State for LED triggers + */ +struct ath5k_led +{ + char name[ATH5K_LED_MAX_NAME_LEN + 1]; /* name of the LED in sysfs */ + struct ath5k_softc *sc; /* driver state */ + struct led_classdev led_dev; /* led classdev */ +}; + + #if CHAN_DEBUG #define ATH_CHAN_MAX (26+26+26+200+200) #else @@ -118,13 +132,11 @@ struct ath5k_softc { size_t desc_len; /* size of TX/RX descriptors */ u16 cachelsz; /* cache line size */ - DECLARE_BITMAP(status, 6); + DECLARE_BITMAP(status, 4); #define ATH_STAT_INVALID 0 /* disable hardware accesses */ #define ATH_STAT_MRRETRY 1 /* multi-rate retry support */ #define ATH_STAT_PROMISC 2 -#define ATH_STAT_LEDBLINKING 3 /* LED blink operation active */ -#define ATH_STAT_LEDENDBLINK 4 /* finish LED blink operation */ -#define ATH_STAT_LEDSOFT 5 /* enable LED gpio status */ +#define ATH_STAT_LEDSOFT 3 /* enable LED gpio status */ unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ unsigned int curmode; /* current phy mode */ @@ -132,13 +144,6 @@ struct ath5k_softc { struct ieee80211_vif *vif; - struct { - u8 rxflags; /* radiotap rx flags */ - u8 txflags; /* radiotap tx flags */ - u16 ledon; /* softled on time */ - u16 ledoff; /* softled off time */ - } hwmap[32]; /* h/w rate ix mappings */ - enum ath5k_int imask; /* interrupt mask copy */ DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */ @@ -148,9 +153,6 @@ struct ath5k_softc { unsigned int led_pin, /* GPIO pin for driving LED */ led_on, /* pin setting for LED on */ led_off; /* off time for current blink */ - struct timer_list led_tim; /* led off timer */ - u8 led_rxrate; /* current rx rate for LED */ - u8 led_txrate; /* current tx rate for LED */ struct tasklet_struct restq; /* reset tasklet */ @@ -159,6 +161,7 @@ struct ath5k_softc { spinlock_t rxbuflock; u32 *rxlink; /* link ptr in last RX desc */ struct tasklet_struct rxtq; /* rx intr tasklet */ + struct ath5k_led rx_led; /* rx led */ struct list_head txbuf; /* transmit buffer */ spinlock_t txbuflock; @@ -167,6 +170,7 @@ struct ath5k_softc { struct ath5k_txq *txq; /* beacon and tx*/ struct tasklet_struct txtq; /* tx intr tasklet */ + struct ath5k_led tx_led; /* tx led */ struct ath5k_buf *bbuf; /* beacon buffer */ unsigned int bhalq, /* SW q for outgoing beacons */ -- 2.30.2