From 39ad77b40e59b39c206e4c5a46611e7abe173d99 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 9 Dec 2009 08:03:31 +0000 Subject: [PATCH] ar71xx: register rtl8366-smi device on the DIR-825 B1 board SVN-Revision: 18710 --- .../files/arch/mips/ar71xx/mach-dir-825-b1.c | 25 ++++++++++++++++--- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c index ae95febd36..4fdb9fb5b4 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -36,6 +37,9 @@ #define DIR825B1_GPIO_BTN_RESET 3 #define DIR825B1_GPIO_BTN_POWERSAVE 8 +#define DIR825B1_GPIO_RTL8366_SDA 5 +#define DIR825B1_GPIO_RTL8366_SCK 7 + #define DIR825B1_BUTTONS_POLL_INTERVAL 20 #define DIR825B1_CAL_LOCATION_0 0x1f661000 @@ -137,6 +141,19 @@ static struct gpio_button dir825b1_gpio_buttons[] __initdata = { } }; +static struct rtl8366_smi_platform_data dir825b1_rtl8366_smi_data = { + .gpio_sda = DIR825B1_GPIO_RTL8366_SDA, + .gpio_sck = DIR825B1_GPIO_RTL8366_SCK, +}; + +static struct platform_device dir825b1_rtl8366_smi_device = { + .name = "rtl8366-smi", + .id = -1, + .dev = { + .platform_data = &dir825b1_rtl8366_smi_data, + } +}; + #ifdef CONFIG_PCI static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = { { @@ -267,16 +284,15 @@ static void __init dir825b1_setup(void) ar71xx_add_device_mdio(0x0); + ar71xx_eth0_data.mii_bus_dev = &dir825b1_rtl8366_smi_device.dev; ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth0_data.phy_mask = 0x1e; ar71xx_eth0_data.speed = SPEED_1000; ar71xx_eth0_data.duplex = DUPLEX_FULL; ar71xx_eth0_pll_data.pll_1000 = 0x11110000; + ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366_smi_device.dev; ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - ar71xx_eth1_data.phy_mask = 0xc0; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; + ar71xx_eth1_data.phy_mask = 0x10; ar71xx_eth1_pll_data.pll_1000 = 0x11110000; ar71xx_add_device_eth(0); @@ -294,6 +310,7 @@ static void __init dir825b1_setup(void) ar71xx_add_device_usb(); + platform_device_register(&dir825b1_rtl8366_smi_device); dir825b1_pci_init(); } -- 2.30.2