From 393cb36199d337c8554cc8dfc853f5f405f4742b Mon Sep 17 00:00:00 2001 From: Chander Kashyap Date: Tue, 6 Dec 2011 23:34:12 +0000 Subject: [PATCH] S5PC2XX: Rename S5pc2XX to exynos As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15 based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15 based SoC's will be sub-classified as Exynos4 and Exynos5 respectively. In order to better adapt and reuse code across various upcoming Samsung Exynos based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix are renamed as exynos4/EXYNOS4. Signed-off-by: Chander Kashyap Signed-off-by: Minkyu Kang --- MAINTAINERS | 6 +- Makefile | 2 +- .../cpu/armv7/{s5pc2xx => exynos}/Makefile | 0 .../arm/cpu/armv7/{s5pc2xx => exynos}/clock.c | 50 +++++++-------- arch/arm/cpu/armv7/{s5pc2xx => exynos}/soc.c | 0 .../asm/{arch-s5pc2xx => arch-exynos}/adc.h | 0 .../asm/{arch-s5pc2xx => arch-exynos}/clk.h | 0 .../asm/{arch-s5pc2xx => arch-exynos}/clock.h | 2 +- .../asm/{arch-s5pc2xx => arch-exynos}/cpu.h | 64 +++++++++---------- .../asm/{arch-s5pc2xx => arch-exynos}/gpio.h | 28 ++++---- .../asm/{arch-s5pc2xx => arch-exynos}/mmc.h | 0 .../asm/{arch-s5pc2xx => arch-exynos}/pwm.h | 0 .../asm/{arch-s5pc2xx => arch-exynos}/sromc.h | 0 .../{arch-s5pc2xx => arch-exynos}/sys_proto.h | 0 .../asm/{arch-s5pc2xx => arch-exynos}/uart.h | 0 board/samsung/origen/lowlevel_init.S | 26 ++++---- board/samsung/origen/mem_setup.S | 12 ++-- board/samsung/origen/origen.c | 8 +-- board/samsung/origen/origen_setup.h | 8 +-- board/samsung/smdkv310/lowlevel_init.S | 22 +++---- board/samsung/smdkv310/mem_setup.S | 8 +-- board/samsung/smdkv310/smdkv310.c | 8 +-- board/samsung/universal_c210/lowlevel_init.S | 24 +++---- board/samsung/universal_c210/universal.c | 8 +-- boards.cfg | 6 +- include/configs/origen.h | 6 +- include/configs/s5pc210_universal.h | 10 +-- include/configs/smdkv310.h | 6 +- 28 files changed, 152 insertions(+), 152 deletions(-) rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/Makefile (100%) rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/clock.c (81%) rename arch/arm/cpu/armv7/{s5pc2xx => exynos}/soc.c (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/adc.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/clk.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/clock.h (99%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/cpu.h (64%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/gpio.h (84%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/mmc.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/pwm.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/sromc.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/sys_proto.h (100%) rename arch/arm/include/asm/{arch-s5pc2xx => arch-exynos}/uart.h (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 4ffdc6c029..a6101cb68b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -693,12 +693,12 @@ Minkyu Kang SMDKC100 ARM ARMV7 (S5PC100 SoC) s5p_goni ARM ARMV7 (S5PC110 SoC) - s5pc210_universal ARM ARMV7 (S5PC210 SoC) + s5pc210_universal ARM ARMV7 (EXYNOS4210 SoC) Chander Kashyap - origen ARM ARMV7 (S5PC210 SoC) - SMDKV310 ARM ARMV7 (S5PC210 SoC) + origen ARM ARMV7 (EXYNOS4210 SoC) + SMDKV310 ARM ARMV7 (EXYNOS4210 SoC) Torsten Koschorrek scb9328 ARM920T (i.MXL) diff --git a/Makefile b/Makefile index de65a173c6..1be2d80978 100644 --- a/Makefile +++ b/Makefile @@ -299,7 +299,7 @@ endif ifeq ($(SOC),s5pc1xx) LIBS += $(CPUDIR)/s5p-common/libs5p-common.o endif -ifeq ($(SOC),s5pc2xx) +ifeq ($(SOC),exynos) LIBS += $(CPUDIR)/s5p-common/libs5p-common.o endif diff --git a/arch/arm/cpu/armv7/s5pc2xx/Makefile b/arch/arm/cpu/armv7/exynos/Makefile similarity index 100% rename from arch/arm/cpu/armv7/s5pc2xx/Makefile rename to arch/arm/cpu/armv7/exynos/Makefile diff --git a/arch/arm/cpu/armv7/s5pc2xx/clock.c b/arch/arm/cpu/armv7/exynos/clock.c similarity index 81% rename from arch/arm/cpu/armv7/s5pc2xx/clock.c rename to arch/arm/cpu/armv7/exynos/clock.c index 5ecd475964..64de262737 100644 --- a/arch/arm/cpu/armv7/s5pc2xx/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -30,11 +30,11 @@ #define CONFIG_SYS_CLK_FREQ_C210 24000000 #endif -/* s5pc210: return pll clock frequency */ -static unsigned long s5pc210_get_pll_clk(int pllreg) +/* exynos4: return pll clock frequency */ +static unsigned long exynos4_get_pll_clk(int pllreg) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); unsigned long r, m, p, s, k = 0, mask, fout; unsigned int freq; @@ -96,11 +96,11 @@ static unsigned long s5pc210_get_pll_clk(int pllreg) return fout; } -/* s5pc210: return ARM clock frequency */ -static unsigned long s5pc210_get_arm_clk(void) +/* exynos4: return ARM clock frequency */ +static unsigned long exynos4_get_arm_clk(void) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); unsigned long div; unsigned long dout_apll; unsigned int apll_ratio; @@ -115,11 +115,11 @@ static unsigned long s5pc210_get_arm_clk(void) return dout_apll; } -/* s5pc210: return pwm clock frequency */ -static unsigned long s5pc210_get_pwm_clk(void) +/* exynos4: return pwm clock frequency */ +static unsigned long exynos4_get_pwm_clk(void) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); unsigned long pclk, sclk; unsigned int sel; unsigned int ratio; @@ -158,11 +158,11 @@ static unsigned long s5pc210_get_pwm_clk(void) return pclk; } -/* s5pc210: return uart clock frequency */ -static unsigned long s5pc210_get_uart_clk(int dev_index) +/* exynos4: return uart clock frequency */ +static unsigned long exynos4_get_uart_clk(int dev_index) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); unsigned long uclk, sclk; unsigned int sel; unsigned int ratio; @@ -205,11 +205,11 @@ static unsigned long s5pc210_get_uart_clk(int dev_index) return uclk; } -/* s5pc210: set the mmc clock */ -static void s5pc210_set_mmc_clk(int dev_index, unsigned int div) +/* exynos4: set the mmc clock */ +static void exynos4_set_mmc_clk(int dev_index, unsigned int div) { - struct s5pc210_clock *clk = - (struct s5pc210_clock *)samsung_get_base_clock(); + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); unsigned int addr; unsigned int val; @@ -234,25 +234,25 @@ static void s5pc210_set_mmc_clk(int dev_index, unsigned int div) unsigned long get_pll_clk(int pllreg) { - return s5pc210_get_pll_clk(pllreg); + return exynos4_get_pll_clk(pllreg); } unsigned long get_arm_clk(void) { - return s5pc210_get_arm_clk(); + return exynos4_get_arm_clk(); } unsigned long get_pwm_clk(void) { - return s5pc210_get_pwm_clk(); + return exynos4_get_pwm_clk(); } unsigned long get_uart_clk(int dev_index) { - return s5pc210_get_uart_clk(dev_index); + return exynos4_get_uart_clk(dev_index); } void set_mmc_clk(int dev_index, unsigned int div) { - s5pc210_set_mmc_clk(dev_index, div); + exynos4_set_mmc_clk(dev_index, div); } diff --git a/arch/arm/cpu/armv7/s5pc2xx/soc.c b/arch/arm/cpu/armv7/exynos/soc.c similarity index 100% rename from arch/arm/cpu/armv7/s5pc2xx/soc.c rename to arch/arm/cpu/armv7/exynos/soc.c diff --git a/arch/arm/include/asm/arch-s5pc2xx/adc.h b/arch/arm/include/asm/arch-exynos/adc.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/adc.h rename to arch/arm/include/asm/arch-exynos/adc.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/clk.h b/arch/arm/include/asm/arch-exynos/clk.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/clk.h rename to arch/arm/include/asm/arch-exynos/clk.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/clock.h b/arch/arm/include/asm/arch-exynos/clock.h similarity index 99% rename from arch/arm/include/asm/arch-s5pc2xx/clock.h rename to arch/arm/include/asm/arch-exynos/clock.h index 0ff8cf8cf4..483c91154b 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -23,7 +23,7 @@ #define __ASM_ARM_ARCH_CLOCK_H_ #ifndef __ASSEMBLY__ -struct s5pc210_clock { +struct exynos4_clock { unsigned char res1[0x4200]; unsigned int src_leftbus; unsigned char res2[0x1fc]; diff --git a/arch/arm/include/asm/arch-s5pc2xx/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h similarity index 64% rename from arch/arm/include/asm/arch-s5pc2xx/cpu.h rename to arch/arm/include/asm/arch-exynos/cpu.h index f9015c76f1..4464d2715c 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -19,33 +19,33 @@ * */ -#ifndef _S5PC2XX_CPU_H -#define _S5PC2XX_CPU_H +#ifndef _EXYNOS4_CPU_H +#define _EXYNOS4_CPU_H -#define S5PC2XX_ADDR_BASE 0x10000000 +#define EXYNOS4_ADDR_BASE 0x10000000 -/* S5PC210 */ -#define S5PC210_GPIO_PART3_BASE 0x03860000 -#define S5PC210_PRO_ID 0x10000000 -#define S5PC210_POWER_BASE 0x10020000 -#define S5PC210_SWRESET 0x10020400 -#define S5PC210_CLOCK_BASE 0x10030000 -#define S5PC210_SYSTIMER_BASE 0x10050000 -#define S5PC210_WATCHDOG_BASE 0x10060000 -#define S5PC210_MIU_BASE 0x10600000 -#define S5PC210_DMC0_BASE 0x10400000 -#define S5PC210_DMC1_BASE 0x10410000 -#define S5PC210_GPIO_PART2_BASE 0x11000000 -#define S5PC210_GPIO_PART1_BASE 0x11400000 -#define S5PC210_FIMD_BASE 0x11C00000 -#define S5PC210_USBOTG_BASE 0x12480000 -#define S5PC210_MMC_BASE 0x12510000 -#define S5PC210_SROMC_BASE 0x12570000 -#define S5PC210_USBPHY_BASE 0x125B0000 -#define S5PC210_UART_BASE 0x13800000 -#define S5PC210_ADC_BASE 0x13910000 -#define S5PC210_PWMTIMER_BASE 0x139D0000 -#define S5PC210_MODEM_BASE 0x13A00000 +/* EXYNOS4 */ +#define EXYNOS4_GPIO_PART3_BASE 0x03860000 +#define EXYNOS4_PRO_ID 0x10000000 +#define EXYNOS4_POWER_BASE 0x10020000 +#define EXYNOS4_SWRESET 0x10020400 +#define EXYNOS4_CLOCK_BASE 0x10030000 +#define EXYNOS4_SYSTIMER_BASE 0x10050000 +#define EXYNOS4_WATCHDOG_BASE 0x10060000 +#define EXYNOS4_MIU_BASE 0x10600000 +#define EXYNOS4_DMC0_BASE 0x10400000 +#define EXYNOS4_DMC1_BASE 0x10410000 +#define EXYNOS4_GPIO_PART2_BASE 0x11000000 +#define EXYNOS4_GPIO_PART1_BASE 0x11400000 +#define EXYNOS4_FIMD_BASE 0x11C00000 +#define EXYNOS4_USBOTG_BASE 0x12480000 +#define EXYNOS4_MMC_BASE 0x12510000 +#define EXYNOS4_SROMC_BASE 0x12570000 +#define EXYNOS4_USBPHY_BASE 0x125B0000 +#define EXYNOS4_UART_BASE 0x13800000 +#define EXYNOS4_ADC_BASE 0x13910000 +#define EXYNOS4_PWMTIMER_BASE 0x139D0000 +#define EXYNOS4_MODEM_BASE 0x13A00000 #ifndef __ASSEMBLY__ #include @@ -60,12 +60,12 @@ static inline int s5p_get_cpu_rev(void) static inline void s5p_set_cpu_id(void) { - s5p_cpu_id = readl(S5PC210_PRO_ID); + s5p_cpu_id = readl(EXYNOS4_PRO_ID); s5p_cpu_id = (0xC000 | ((s5p_cpu_id & 0x00FFF000) >> 12)); /* - * 0xC200: S5PC210 EVT0 - * 0xC210: S5PC210 EVT1 + * 0xC200: EXYNOS4210 EVT0 + * 0xC210: EXYNOS4210 EVT1 */ if (s5p_cpu_id == 0xC200) { s5p_cpu_id |= 0x10; @@ -81,13 +81,13 @@ static inline int cpu_is_##type(void) \ return s5p_cpu_id == id ? 1 : 0; \ } -IS_SAMSUNG_TYPE(s5pc210, 0xc210) +IS_SAMSUNG_TYPE(exynos4, 0xc210) #define SAMSUNG_BASE(device, base) \ static inline unsigned int samsung_get_base_##device(void) \ { \ - if (cpu_is_s5pc210()) \ - return S5PC210_##base; \ + if (cpu_is_exynos4()) \ + return EXYNOS4_##base; \ else \ return 0; \ } @@ -110,4 +110,4 @@ SAMSUNG_BASE(usb_otg, USBOTG_BASE) SAMSUNG_BASE(watchdog, WATCHDOG_BASE) #endif -#endif /* _S5PC2XX_CPU_H */ +#endif /* _EXYNOS4_CPU_H */ diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h similarity index 84% rename from arch/arm/include/asm/arch-s5pc2xx/gpio.h rename to arch/arm/include/asm/arch-exynos/gpio.h index 8be620cae6..9863a12245 100644 --- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -32,7 +32,7 @@ struct s5p_gpio_bank { unsigned char res1[8]; }; -struct s5pc210_gpio_part1 { +struct exynos4_gpio_part1 { struct s5p_gpio_bank a0; struct s5p_gpio_bank a1; struct s5p_gpio_bank b; @@ -51,7 +51,7 @@ struct s5pc210_gpio_part1 { struct s5p_gpio_bank f3; }; -struct s5pc210_gpio_part2 { +struct exynos4_gpio_part2 { struct s5p_gpio_bank j0; struct s5p_gpio_bank j1; struct s5p_gpio_bank k0; @@ -75,7 +75,7 @@ struct s5pc210_gpio_part2 { struct s5p_gpio_bank x3; }; -struct s5pc210_gpio_part3 { +struct exynos4_gpio_part3 { struct s5p_gpio_bank z; }; @@ -92,27 +92,27 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode); /* GPIO pins per bank */ #define GPIO_PER_BANK 8 -#define s5pc210_gpio_part1_get_nr(bank, pin) \ - ((((((unsigned int) &(((struct s5pc210_gpio_part1 *) \ - S5PC210_GPIO_PART1_BASE)->bank)) \ - - S5PC210_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ +#define exynos4_gpio_part1_get_nr(bank, pin) \ + ((((((unsigned int) &(((struct exynos4_gpio_part1 *) \ + EXYNOS4_GPIO_PART1_BASE)->bank)) \ + - EXYNOS4_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \ * GPIO_PER_BANK) + pin) -#define GPIO_PART1_MAX ((sizeof(struct s5pc210_gpio_part1) \ +#define GPIO_PART1_MAX ((sizeof(struct exynos4_gpio_part1) \ / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK) -#define s5pc210_gpio_part2_get_nr(bank, pin) \ - (((((((unsigned int) &(((struct s5pc210_gpio_part2 *) \ - S5PC210_GPIO_PART2_BASE)->bank)) \ - - S5PC210_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ +#define exynos4_gpio_part2_get_nr(bank, pin) \ + (((((((unsigned int) &(((struct exynos4_gpio_part2 *) \ + EXYNOS4_GPIO_PART2_BASE)->bank)) \ + - EXYNOS4_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \ * GPIO_PER_BANK) + pin) + GPIO_PART1_MAX) static inline unsigned int s5p_gpio_base(int nr) { if (nr < GPIO_PART1_MAX) - return S5PC210_GPIO_PART1_BASE; + return EXYNOS4_GPIO_PART1_BASE; else - return S5PC210_GPIO_PART2_BASE; + return EXYNOS4_GPIO_PART2_BASE; return 0; } diff --git a/arch/arm/include/asm/arch-s5pc2xx/mmc.h b/arch/arm/include/asm/arch-exynos/mmc.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/mmc.h rename to arch/arm/include/asm/arch-exynos/mmc.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/pwm.h b/arch/arm/include/asm/arch-exynos/pwm.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/pwm.h rename to arch/arm/include/asm/arch-exynos/pwm.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/sromc.h b/arch/arm/include/asm/arch-exynos/sromc.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/sromc.h rename to arch/arm/include/asm/arch-exynos/sromc.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/sys_proto.h b/arch/arm/include/asm/arch-exynos/sys_proto.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/sys_proto.h rename to arch/arm/include/asm/arch-exynos/sys_proto.h diff --git a/arch/arm/include/asm/arch-s5pc2xx/uart.h b/arch/arm/include/asm/arch-exynos/uart.h similarity index 100% rename from arch/arm/include/asm/arch-s5pc2xx/uart.h rename to arch/arm/include/asm/arch-exynos/uart.h diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S index ddca1e21fc..0eebbfc244 100644 --- a/board/samsung/origen/lowlevel_init.S +++ b/board/samsung/origen/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * Lowlevel setup for ORIGEN board based on S5PV310 + * Lowlevel setup for ORIGEN board based on EXYNOS4210 * * Copyright (C) 2011 Samsung Electronics * @@ -43,11 +43,11 @@ lowlevel_init: /* r5 has always zero */ mov r5, #0 - ldr r7, =S5PC210_GPIO_PART1_BASE - ldr r6, =S5PC210_GPIO_PART2_BASE + ldr r7, =EXYNOS4_GPIO_PART1_BASE + ldr r6, =EXYNOS4_GPIO_PART2_BASE /* check reset status */ - ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET) + ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET) ldr r1, [r0] /* AFTR wakeup reset */ @@ -97,9 +97,9 @@ wakeup_reset: exit_wakeup: /* Load return address and jump to kernel */ - ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET) + ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET) - /* r1 = physical address of s5pc210_cpu_resume function */ + /* r1 = physical address of exynos4210_cpu_resume function */ ldr r1, [r0] /* Jump to kernel*/ @@ -113,7 +113,7 @@ exit_wakeup: */ system_clock_init: push {lr} - ldr r0, =S5PC210_CLOCK_BASE + ldr r0, =EXYNOS4_CLOCK_BASE /* APLL(1), MPLL(1), CORE(0), HPM(0) */ ldr r1, =CLK_SRC_CPU_VAL @@ -290,13 +290,13 @@ uart_asm_init: /* setup UART0-UART3 GPIOs (part1) */ mov r0, r7 - ldr r1, =S5PC210_GPIO_A0_CON_VAL - str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET] - ldr r1, =S5PC210_GPIO_A1_CON_VAL - str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET] + ldr r1, =EXYNOS4_GPIO_A0_CON_VAL + str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET] + ldr r1, =EXYNOS4_GPIO_A1_CON_VAL + str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET] - ldr r0, =S5PC210_UART_BASE - add r0, r0, #S5PC210_DEFAULT_UART_OFFSET + ldr r0, =EXYNOS4_UART_BASE + add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET ldr r1, =ULCON_VAL str r1, [r0, #ULCON_OFFSET] diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S index a798848ba1..b49b193a79 100644 --- a/board/samsung/origen/mem_setup.S +++ b/board/samsung/origen/mem_setup.S @@ -1,5 +1,5 @@ /* - * Memory setup for ORIGEN board based on S5PV310 + * Memory setup for ORIGEN board based on EXYNOS4210 * * Copyright (C) 2011 Samsung Electronics * @@ -38,7 +38,7 @@ mem_ctrl_asm_init: str r1, [r0] #ifdef SET_MIU - ldr r0, =S5PC210_MIU_BASE + ldr r0, =EXYNOS4_MIU_BASE /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */ ldr r1, =0x20001507 str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET] @@ -48,7 +48,7 @@ mem_ctrl_asm_init: str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET] #endif /* DREX0 */ - ldr r0, =S5PC210_DMC0_BASE + ldr r0, =EXYNOS4_DMC0_BASE /* * DLL Parameter Setting: @@ -229,7 +229,7 @@ mem_ctrl_asm_init: bne 8b /* DREX1 */ - ldr r0, =S5PC210_DMC1_BASE @0x10410000 + ldr r0, =EXYNOS4_DMC1_BASE @0x10410000 /* * DLL Parameter Setting: @@ -410,11 +410,11 @@ mem_ctrl_asm_init: bne 8b /* turn on DREX0, DREX1 */ - ldr r0, =S5PC210_DMC0_BASE + ldr r0, =EXYNOS4_DMC0_BASE ldr r1, =0x0FFF303a str r1, [r0, #DMC_CONCONTROL] - ldr r0, =S5PC210_DMC1_BASE + ldr r0, =EXYNOS4_DMC1_BASE ldr r1, =0x0FFF303a str r1, [r0, #DMC_CONCONTROL] diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c index 8882646eca..638e7b1edb 100644 --- a/board/samsung/origen/origen.c +++ b/board/samsung/origen/origen.c @@ -27,13 +27,13 @@ #include DECLARE_GLOBAL_DATA_PTR; -struct s5pc210_gpio_part1 *gpio1; -struct s5pc210_gpio_part2 *gpio2; +struct exynos4_gpio_part1 *gpio1; +struct exynos4_gpio_part2 *gpio2; int board_init(void) { - gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE; - gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE; + gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE; + gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE; gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); return 0; diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h index 63d85d8a8c..d949ad27b8 100644 --- a/board/samsung/origen/origen_setup.h +++ b/board/samsung/origen/origen_setup.h @@ -98,8 +98,8 @@ #define INFORM1_OFFSET 0x804 /* GPIO Offsets for UART: GPIO Contol Register */ -#define S5PC210_GPIO_A0_CON_OFFSET 0x00 -#define S5PC210_GPIO_A1_CON_OFFSET 0x20 +#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00 +#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20 /* UART Register offsets */ #define ULCON_OFFSET 0x00 @@ -416,8 +416,8 @@ * UART GPIO_A0/GPIO_A1 Control Register Value * 0x2: UART Function */ -#define S5PC210_GPIO_A0_CON_VAL 0x22222222 -#define S5PC210_GPIO_A1_CON_VAL 0x222222 +#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222 +#define EXYNOS4_GPIO_A1_CON_VAL 0x222222 /* ULCON: UART Line Control Value 8N1 */ #define WORD_LEN_5_BIT 0x00 diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S index 58b737bd12..7a1ea98aed 100644 --- a/board/samsung/smdkv310/lowlevel_init.S +++ b/board/samsung/smdkv310/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * Lowlevel setup for SMDKV310 board based on S5PC210 + * Lowlevel setup for SMDKV310 board based on EXYNOS4210 * * Copyright (C) 2011 Samsung Electronics * @@ -45,11 +45,11 @@ lowlevel_init: /* r5 has always zero */ mov r5, #0 - ldr r7, =S5PC210_GPIO_PART1_BASE - ldr r6, =S5PC210_GPIO_PART2_BASE + ldr r7, =EXYNOS4_GPIO_PART1_BASE + ldr r6, =EXYNOS4_GPIO_PART2_BASE /* check reset status */ - ldr r0, =(S5PC210_POWER_BASE + 0x81C) @ INFORM7 + ldr r0, =(EXYNOS4_POWER_BASE + 0x81C) @ INFORM7 ldr r1, [r0] /* AFTR wakeup reset */ @@ -95,9 +95,9 @@ wakeup_reset: exit_wakeup: /* Load return address and jump to kernel */ - ldr r0, =(S5PC210_POWER_BASE + 0x800) @ INFORM0 + ldr r0, =(EXYNOS4_POWER_BASE + 0x800) @ INFORM0 - /* r1 = physical address of s5pc210_cpu_resume function */ + /* r1 = physical address of exynos4210_cpu_resume function */ ldr r1, [r0] /* Jump to kernel*/ @@ -111,7 +111,7 @@ exit_wakeup: */ system_clock_init: push {lr} - ldr r0, =S5PC210_CLOCK_BASE + ldr r0, =EXYNOS4_CLOCK_BASE /* APLL(1), MPLL(1), CORE(0), HPM(0) */ ldr r1, =0x0101 @@ -388,12 +388,12 @@ uart_asm_init: /* setup UART0-UART3 GPIOs (part1) */ mov r0, r7 ldr r1, =0x22222222 - str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET + str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET ldr r1, =0x00222222 - str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET + str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET - ldr r0, =S5PC210_UART_BASE - add r0, r0, #S5PC210_DEFAULT_UART_OFFSET + ldr r0, =EXYNOS4_UART_BASE + add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET ldr r1, =0x3C5 str r1, [r0, #0x4] diff --git a/board/samsung/smdkv310/mem_setup.S b/board/samsung/smdkv310/mem_setup.S index 73aebe3c60..d3b6265971 100644 --- a/board/samsung/smdkv310/mem_setup.S +++ b/board/samsung/smdkv310/mem_setup.S @@ -1,5 +1,5 @@ /* - * Memory setup for SMDKV310 board based on S5PC210 + * Memory setup for SMDKV310 board based on EXYNOS4210 * * Copyright (C) 2011 Samsung Electronics * @@ -54,7 +54,7 @@ mem_ctrl_asm_init: str r1, [r0] #ifdef SET_MIU - ldr r0, =S5PC210_MIU_BASE @0x10600000 + ldr r0, =EXYNOS4_MIU_BASE @0x10600000 #ifdef CONFIG_MIU_1BIT_INTERLEAVED ldr r1, =0x0000000c str r1, [r0, #0x400] @MIU_INTLV_CONFIG @@ -89,7 +89,7 @@ mem_ctrl_asm_init: #endif #endif /* DREX0 */ - ldr r0, =S5PC210_DMC0_BASE @0x10400000 + ldr r0, =EXYNOS4_DMC0_BASE @0x10400000 ldr r1, =0xe0000086 str r1, [r0, #0x1C] @DMC_PHYCONTROL1 @@ -221,7 +221,7 @@ mem_ctrl_asm_init: bne 8b /* DREX1 */ - ldr r0, =S5PC210_DMC1_BASE @0x10410000 + ldr r0, =EXYNOS4_DMC1_BASE @0x10410000 ldr r1, =0xe0000086 str r1, [r0, #0x1C] @DMC_PHYCONTROL1 diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c index d9caca7f18..81ac8f6f4a 100644 --- a/board/samsung/smdkv310/smdkv310.c +++ b/board/samsung/smdkv310/smdkv310.c @@ -29,8 +29,8 @@ #include DECLARE_GLOBAL_DATA_PTR; -struct s5pc210_gpio_part1 *gpio1; -struct s5pc210_gpio_part2 *gpio2; +struct exynos4_gpio_part1 *gpio1; +struct exynos4_gpio_part2 *gpio2; static void smc9115_pre_init(void) { @@ -52,8 +52,8 @@ static void smc9115_pre_init(void) int board_init(void) { - gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE; - gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE; + gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE; + gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE; smc9115_pre_init(); diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S index 67635bbfb2..dc7f69ea44 100644 --- a/board/samsung/universal_c210/lowlevel_init.S +++ b/board/samsung/universal_c210/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * Lowlevel setup for universal board based on S5PC210 + * Lowlevel setup for universal board based on EXYNOS4210 * * Copyright (C) 2010 Samsung Electronics * Kyungmin Park @@ -43,11 +43,11 @@ lowlevel_init: /* r5 has always zero */ mov r5, #0 - ldr r7, =S5PC210_GPIO_PART1_BASE - ldr r6, =S5PC210_GPIO_PART2_BASE + ldr r7, =EXYNOS4_GPIO_PART1_BASE + ldr r6, =EXYNOS4_GPIO_PART2_BASE /* System Timer */ - ldr r0, =S5PC210_SYSTIMER_BASE + ldr r0, =EXYNOS4_SYSTIMER_BASE ldr r1, =0x5000 str r1, [r0, #0x0] ldr r1, =0xffffffff @@ -57,7 +57,7 @@ lowlevel_init: /* PMIC manual reset */ /* nPOWER: XEINT_23: GPX2[7] */ - add r0, r6, #0xC40 @ S5PC210_GPIO_X2_OFFSET + add r0, r6, #0xC40 @ EXYNOS4_GPIO_X2_OFFSET ldr r1, [r0, #0x0] bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit orr r1, r1, #(0x1 << 28) @ Output @@ -71,7 +71,7 @@ lowlevel_init: bl system_clock_init /* Disable Watchdog */ - ldr r0, =S5PC210_WATCHDOG_BASE @0x10060000 + ldr r0, =EXYNOS4_WATCHDOG_BASE @0x10060000 str r5, [r0] /* UART */ @@ -99,12 +99,12 @@ uart_asm_init: */ mov r0, r7 ldr r1, =0x22222222 - str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET + str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET ldr r1, =0x00223322 - str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET + str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET - /* UART_SEL GPY4[7] (part2) at S5PC210 */ - add r0, r6, #0x1A0 @ S5PC210_GPIO_Y4_OFFSET + /* UART_SEL GPY4[7] (part2) at EXYNOS4 */ + add r0, r6, #0x1A0 @ EXYNOS4_GPIO_Y4_OFFSET ldr r1, [r0, #0x0] bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit orr r1, r1, #(0x1 << 28) @@ -125,7 +125,7 @@ uart_asm_init: nop system_clock_init: - ldr r0, =S5PC210_CLOCK_BASE + ldr r0, =EXYNOS4_CLOCK_BASE /* APLL(1), MPLL(1), CORE(0), HPM(0) */ ldr r1, =0x0101 @@ -326,7 +326,7 @@ system_clock_init: nop system_power_init: - ldr r0, =S5PC210_POWER_BASE @ 0x10020000 + ldr r0, =EXYNOS4_POWER_BASE @ 0x10020000 ldr r2, =0x330C @ PS_HOLD_CONTROL ldr r1, [r0, r2] diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index d767eaac49..f9b8a76429 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -31,8 +31,8 @@ DECLARE_GLOBAL_DATA_PTR; -struct s5pc210_gpio_part1 *gpio1; -struct s5pc210_gpio_part2 *gpio2; +struct exynos4_gpio_part1 *gpio1; +struct exynos4_gpio_part2 *gpio2; unsigned int board_rev; u32 get_board_rev(void) @@ -49,8 +49,8 @@ static void check_hw_revision(void); int board_init(void) { - gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE; - gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE; + gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE; + gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE; gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210; gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; diff --git a/boards.cfg b/boards.cfg index b831515581..bc8d0083a2 100644 --- a/boards.cfg +++ b/boards.cfg @@ -202,9 +202,9 @@ omap4_sdp4430 arm armv7 sdp4430 ti omap5_evm arm armv7 omap5_evm ti omap5 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx -origen arm armv7 origen samsung s5pc2xx -s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx -smdkv310 arm armv7 smdkv310 samsung s5pc2xx +origen arm armv7 origen samsung exynos +s5pc210_universal arm armv7 universal_c210 samsung exynos +smdkv310 arm armv7 smdkv310 samsung exynos harmony arm armv7 harmony nvidia tegra2 seaboard arm armv7 seaboard nvidia tegra2 ventana arm armv7 ventana nvidia tegra2 diff --git a/include/configs/origen.h b/include/configs/origen.h index 380ef4f612..cd502d10d8 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -1,7 +1,7 @@ /* * Copyright (C) 2011 Samsung Electronics * - * Configuration settings for the SAMSUNG ORIGEN (S5PV310) board. + * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board. * * See file CREDITS for list of people who contributed to this * project. @@ -28,7 +28,7 @@ /* High Level Configuration Options */ #define CONFIG_SAMSUNG 1 /* SAMSUNG core */ #define CONFIG_S5P 1 /* S5P Family */ -#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */ +#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ #define CONFIG_ORIGEN 1 /* working with ORIGEN*/ #include /* get chip and board defs */ @@ -68,7 +68,7 @@ #define CONFIG_SERIAL_MULTI 1 #define CONFIG_SERIAL2 1 /* use SERIAL 2 */ #define CONFIG_BAUDRATE 115200 -#define S5PC210_DEFAULT_UART_OFFSET 0x020000 +#define EXYNOS4_DEFAULT_UART_OFFSET 0x020000 /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC 1 diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index cc14f9797e..b36ad3a193 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -2,7 +2,7 @@ * Copyright (C) 2010 Samsung Electronics * Minkyu Kang * - * Configuation settings for the SAMSUNG Universal (s5pc100) board. + * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board. * * See file CREDITS for list of people who contributed to this * project. @@ -32,7 +32,7 @@ */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ #define CONFIG_S5P 1 /* which is in a S5P Family */ -#define CONFIG_S5PC210 1 /* which is in a S5PC210 */ +#define CONFIG_EXYNOS4210 1 /* which is in a EXYNOS4210 */ #define CONFIG_UNIVERSAL 1 /* working with Universal */ #include /* get chip and board defs */ @@ -47,7 +47,7 @@ #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define CONFIG_SYS_TEXT_BASE 0x44800000 -/* input clock of PLL: Universal has 24MHz input clock at S5PC210 */ +/* input clock of PLL: Universal has 24MHz input clock at EXYNOS4210 */ #define CONFIG_SYS_CLK_FREQ_C210 24000000 #define CONFIG_SETUP_MEMORY_TAGS @@ -249,8 +249,8 @@ /* * I2C Settings */ -#define CONFIG_SOFT_I2C_GPIO_SCL s5pc210_gpio_part1_get_nr(b, 7) -#define CONFIG_SOFT_I2C_GPIO_SDA s5pc210_gpio_part1_get_nr(b, 6) +#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7) +#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6) #define CONFIG_SOFT_I2C #define CONFIG_SOFT_I2C_READ_REPEATED_START diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index fc8bb06d59..93c25da1cf 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -1,7 +1,7 @@ /* * Copyright (C) 2011 Samsung Electronics * - * Configuration settings for the SAMSUNG SMDKV310 (S5PC210) board. + * Configuration settings for the SAMSUNG SMDKV310 (EXYNOS4210) board. * * See file CREDITS for list of people who contributed to this * project. @@ -28,7 +28,7 @@ /* High Level Configuration Options */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ #define CONFIG_S5P 1 /* S5P Family */ -#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */ +#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ #define CONFIG_SMDKV310 1 /* working with SMDKV310*/ #include /* get chip and board defs */ @@ -65,7 +65,7 @@ #define CONFIG_SERIAL_MULTI 1 #define CONFIG_SERIAL1 1 /* use SERIAL 1 */ #define CONFIG_BAUDRATE 115200 -#define S5PC210_DEFAULT_UART_OFFSET 0x010000 +#define EXYNOS4_DEFAULT_UART_OFFSET 0x010000 /* SD/MMC configuration */ #define CONFIG_GENERIC_MMC 1 -- 2.30.2