From 385a4c2e286571ba824ee5312f506f198866c3b5 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 14 Nov 2012 18:28:39 +0800 Subject: [PATCH] ASoC: ak4104: add reset line property to DT bindings This device doesn't have a pdata definition for legacy boards, and unless anyone need to control the reset GPIO, it's not worth adding one. So this feature is only available to DT users for now. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/ak4104.txt | 5 +++++ sound/soc/codecs/ak4104.c | 17 +++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt index 1f8e5066d443..b902ee39cf89 100644 --- a/Documentation/devicetree/bindings/sound/ak4104.txt +++ b/Documentation/devicetree/bindings/sound/ak4104.txt @@ -8,6 +8,11 @@ Required properties: - reg : The chip select number on the SPI bus +Optional properties: + + - reset-gpio : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the device starts. + Example: spdif: ak4104@0 { diff --git a/sound/soc/codecs/ak4104.c b/sound/soc/codecs/ak4104.c index d4d485808894..eec086b226f7 100644 --- a/sound/soc/codecs/ak4104.c +++ b/sound/soc/codecs/ak4104.c @@ -15,6 +15,8 @@ #include #include #include +#include +#include #include /* AK4104 registers addresses */ @@ -204,6 +206,7 @@ static const struct regmap_config ak4104_regmap = { static int ak4104_spi_probe(struct spi_device *spi) { + struct device_node *np = spi->dev.of_node; struct ak4104_private *ak4104; unsigned int val; int ret; @@ -225,6 +228,20 @@ static int ak4104_spi_probe(struct spi_device *spi) return ret; } + if (np) { + enum of_gpio_flags flags; + int gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags); + + if (gpio_is_valid(gpio)) { + ret = devm_gpio_request_one(&spi->dev, gpio, + flags & OF_GPIO_ACTIVE_LOW ? + GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH, + "ak4104 reset"); + if (ret < 0) + return ret; + } + } + /* read the 'reserved' register - according to the datasheet, it * should contain 0x5b. Not a good way to verify the presence of * the device, but there is no hardware ID register. */ -- 2.30.2