From 383cf4e8d47f902600263191f8f167379c376985 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 27 Apr 2011 17:02:37 +0300 Subject: [PATCH] usb: musb: omap2430: Fix retention idle on musb peripheral only boards Recent runtime pm and hwmod conversions for 2.6.39 broke the musb peripheral mode OMAP retention idle on boards where the board mode in struct musb_hdrc_platform_data is set to MUSB_PERIPHERAL. These conversions changed the way how the OTG_SYSCONFIG register is configured and used in runtime. Before 2.6.39 smart standby/idle modes were activated statically in OTG_SYSCONFIG. Those modes allow that the musb is able to idle when peripheral device is not connected to host. In 2.6.39 the OTG_SYSCONFIG is updated runtime depending on VBUS status. No standby/idle modes are used when device is connected and force standby/idle when disconnected. Unfortunately VBUS disconnect event that handles the disconnect case lets the peripheral musb to idle only when board mode is MUSB_OTG. Fix this by checking the peripheral mode also. Signed-off-by: Jarkko Nikula Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 57a27fa954b4..e9e60b6e0583 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -270,7 +270,7 @@ static int musb_otg_notifications(struct notifier_block *nb, DBG(4, "VBUS Disconnect\n"); #ifdef CONFIG_USB_GADGET_MUSB_HDRC - if (is_otg_enabled(musb)) + if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) if (musb->gadget_driver) #endif { -- 2.30.2