From 372fa10172a2f9e1bfbc70778449628e82b72341 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 13 Apr 2017 10:13:53 +0800 Subject: [PATCH] clk: sunxi-ng: a33: gate then ungate PLL CPU clk after rate change This patch utilizes the new PLL clk notifier to gate then ungate the PLL CPU clock after rate changes. This should mitigate the system hangs observed after the introduction of cpufreq for the A33. Signed-off-by: Chen-Yu Tsai Tested-by: Quentin Schulz Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c index a7b3c08ed0e2..2c69b631967a 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c +++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c @@ -752,6 +752,13 @@ static const struct sunxi_ccu_desc sun8i_a33_ccu_desc = { .num_resets = ARRAY_SIZE(sun8i_a33_ccu_resets), }; +static struct ccu_pll_nb sun8i_a33_pll_cpu_nb = { + .common = &pll_cpux_clk.common, + /* copy from pll_cpux_clk */ + .enable = BIT(31), + .lock = BIT(28), +}; + static struct ccu_mux_nb sun8i_a33_cpu_nb = { .common = &cpux_clk.common, .cm = &cpux_clk.mux, @@ -783,6 +790,10 @@ static void __init sun8i_a33_ccu_setup(struct device_node *node) sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc); + /* Gate then ungate PLL CPU after any rate changes */ + ccu_pll_notifier_register(&sun8i_a33_pll_cpu_nb); + + /* Reparent CPU during PLL CPU rate changes */ ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk, &sun8i_a33_cpu_nb); } -- 2.30.2