From 35d601f974050feb5463a171ab90940c0ebe8ac9 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 20 Dec 2013 11:41:20 +0000 Subject: [PATCH] ar71xx: ag71xx: calculate max frame len register value from the MTU Set the MAX_FRAME_LEN register to zero in ag71xx_hw_init() and write the correct value into that from the ag71xx_open() and ag71xx_fast_reset() functions. Also recalculate the RX buffer size based on the actual maximum frame length value to optimize memory allocation. Additionaly, disallow to change the MTU value while the interface it running. Signed-off-by: Gabor Juhos SVN-Revision: 39147 --- .../net/ethernet/atheros/ag71xx/ag71xx_main.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c index ce05c108821b..715c1cef1be6 100644 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c +++ b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c @@ -438,8 +438,8 @@ static void ag71xx_hw_setup(struct ag71xx *ag) ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK); - /* setup max frame length */ - ag71xx_wr(ag, AG71XX_REG_MAC_MFL, ag->max_frame_len); + /* setup max frame length to zero */ + ag71xx_wr(ag, AG71XX_REG_MAC_MFL, 0); /* setup FIFO configuration registers */ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT); @@ -508,6 +508,10 @@ static void ag71xx_fast_reset(struct ag71xx *ag) ag71xx_dma_reset(ag); ag71xx_hw_setup(ag); + /* setup max frame length */ + ag71xx_wr(ag, AG71XX_REG_MAC_MFL, + ag71xx_max_frame_len(ag->dev->mtu)); + ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds); ag71xx_wr(ag, AG71XX_REG_TX_DESC, tx_ds); ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg); @@ -612,9 +616,14 @@ void ag71xx_link_adjust(struct ag71xx *ag) static int ag71xx_open(struct net_device *dev) { struct ag71xx *ag = netdev_priv(dev); + unsigned int max_frame_len; int ret; - ag->rx_buf_size = ag->max_frame_len + NET_SKB_PAD + NET_IP_ALIGN; + max_frame_len = ag71xx_max_frame_len(dev->mtu); + ag->rx_buf_size = max_frame_len + NET_SKB_PAD + NET_IP_ALIGN; + + /* setup max frame length */ + ag71xx_wr(ag, AG71XX_REG_MAC_MFL, max_frame_len); ret = ag71xx_rings_init(ag); if (ret) @@ -1063,6 +1072,9 @@ static int ag71xx_change_mtu(struct net_device *dev, int new_mtu) if (new_mtu < 68 || max_frame_len > ag->max_frame_len) return -EINVAL; + if (netif_running(dev)) + return -EBUSY; + dev->mtu = new_mtu; return 0; } -- 2.30.2