From 353cafbec68c2c46f315263e66065d5b818fdc1e Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 29 Feb 2020 16:50:56 +0100 Subject: [PATCH] mpc85xx: Remove kernel 4.14 support This target was switched to kernel 4.19 more than 6 months ago in commit f342ffd300da ("treewide: kernel: bump some targets to 4.19") and now with kernel 5.4 support being added it gets harder to support kernel 4.14 in addition to kernel 4.19 and 5.4. Signed-off-by: Hauke Mehrtens --- target/linux/mpc85xx/config-4.14 | 365 ------------------ ...85xx-add-gpio-keys-to-of-match-table.patch | 10 - ...0-powerpc-85xx-tl-wdr4900-v1-support.patch | 82 ---- .../101-powerpc-85xx-hiveap-330-support.patch | 30 -- .../102-powerpc-add-cmdline-override.patch | 37 -- .../103-powerpc-fix-build-cross32ar.patch | 10 - ...change-P2020RDB-dts-file-for-OpenWRT.patch | 170 -------- .../105-powerpc-85xx-red-15w-rev1.patch | 29 -- .../106-powerpc-85xx-panda-support.patch | 30 -- 9 files changed, 763 deletions(-) delete mode 100644 target/linux/mpc85xx/config-4.14 delete mode 100644 target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch delete mode 100644 target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch delete mode 100644 target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch delete mode 100644 target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch delete mode 100644 target/linux/mpc85xx/patches-4.14/103-powerpc-fix-build-cross32ar.patch delete mode 100644 target/linux/mpc85xx/patches-4.14/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch delete mode 100644 target/linux/mpc85xx/patches-4.14/105-powerpc-85xx-red-15w-rev1.patch delete mode 100644 target/linux/mpc85xx/patches-4.14/106-powerpc-85xx-panda-support.patch diff --git a/target/linux/mpc85xx/config-4.14 b/target/linux/mpc85xx/config-4.14 deleted file mode 100644 index dd80f2cdd7..0000000000 --- a/target/linux/mpc85xx/config-4.14 +++ /dev/null @@ -1,365 +0,0 @@ -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_ADVANCED_OPTIONS is not set -CONFIG_AR8216_PHY=y -CONFIG_AR8216_PHY_LEDS=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -# CONFIG_ARCH_HAS_STRICT_MODULE_RWX is not set -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_ARCH_MMAP_RND_BITS=11 -CONFIG_ARCH_MMAP_RND_BITS_MAX=17 -CONFIG_ARCH_MMAP_RND_BITS_MIN=11 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set -# CONFIG_ARCH_RANDOM is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y -CONFIG_ASN1=y -CONFIG_AUDIT_ARCH=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOOKE=y -CONFIG_BOOKE_WDT=y -CONFIG_BOUNCE=y -# CONFIG_BSC9131_RDB is not set -# CONFIG_BSC9132_QDS is not set -# CONFIG_C293_PCIE is not set -CONFIG_CLONE_BACKWARDS=y -CONFIG_CLZ_TAB=y -CONFIG_CMDLINE="console=ttyS0,115200" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -# CONFIG_CORENET_GENERIC is not set -# CONFIG_CPM2 is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -# CONFIG_CRYPTO_AES_PPC_SPE is not set -CONFIG_CRYPTO_AKCIPHER=y -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AUTHENC=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_MD5_PPC is not set -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RSA=y -# CONFIG_CRYPTO_SHA1_PPC is not set -# CONFIG_CRYPTO_SHA1_PPC_SPE is not set -# CONFIG_CRYPTO_SHA256_PPC_SPE is not set -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEFAULT_UIMAGE is not set -CONFIG_DNOTIFY=y -CONFIG_DTC=y -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_EARLY_PRINTK=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_EPAPR_BOOT is not set -CONFIG_ETHERNET_PACKET_MANGLE=y -# CONFIG_FHCI_DEBUG is not set -CONFIG_FIXED_PHY=y -# CONFIG_FORCE_SMP is not set -CONFIG_FSL_BOOKE=y -# CONFIG_FSL_DPAA is not set -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_FSL_FMAN is not set -CONFIG_FSL_GTM=y -CONFIG_FSL_LBC=y -CONFIG_FSL_PCI=y -CONFIG_FSL_PQ_MDIO=y -CONFIG_FSL_SOC=y -CONFIG_FSL_SOC_BOOKE=y -# CONFIG_FSL_ULI1575 is not set -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -# CONFIG_GENERIC_CSUM is not set -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_NVRAM=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GEN_RTC=y -# CONFIG_GE_FPGA is not set -# CONFIG_GE_IMP3A is not set -CONFIG_GIANFAR=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MPC8XXX=y -CONFIG_GPIO_SYSFS=y -# CONFIG_GRO_CELLS is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAS_RAPIDIO is not set -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -# CONFIG_HAVE_ARCH_BITREVERSE is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_CBPF_JIT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_GENERIC_GUP=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KPROBES_ON_FTRACE=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y -# CONFIG_HIVEAP_330 is not set -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_MPC=y -CONFIG_ILLEGAL_POINTER_VALUE=0 -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -# CONFIG_IPIC is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_ISA_DMA_API=y -CONFIG_KERNEL_GZIP=y -CONFIG_KERNEL_START=0xc0000000 -# CONFIG_KSI8560 is not set -CONFIG_LIBFDT=y -CONFIG_LOWMEM_CAM_NUM=3 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_LXT_PHY=y -# CONFIG_MATH_EMULATION is not set -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MIGRATION=y -# CONFIG_MMIO_NVRAM is not set -CONFIG_MODULES_USE_ELF_RELA=y -# CONFIG_MPC8536_DS is not set -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_DS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC85xx_RDB is not set -CONFIG_MPIC=y -# CONFIG_MPIC_MSGR is not set -CONFIG_MPIC_TIMER=y -# CONFIG_MPIC_U3_HT_IRQS is not set -# CONFIG_MPIC_WEIRD is not set -CONFIG_MPILIB=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_SPI_NOR=y -# CONFIG_MVME2500 is not set -# CONFIG_NEED_DMA_MAP_STATE is not set -# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NLS=y -# CONFIG_NONSTATIC_KERNEL is not set -CONFIG_NO_BOOTMEM=y -CONFIG_NR_IRQS=512 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND=y -# CONFIG_P1010_RDB is not set -# CONFIG_P1022_DS is not set -# CONFIG_P1022_RDK is not set -# CONFIG_P1023_RDB is not set -CONFIG_PAGE_OFFSET=0xc0000000 -# CONFIG_PANDA is not set -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_PERFORMANCE is not set -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYSICAL_ALIGN=0x04000000 -CONFIG_PHYSICAL_START=0x00000000 -# CONFIG_PHYS_64BIT is not set -# CONFIG_PPA8548 is not set -CONFIG_PPC=y -CONFIG_PPC32=y -# CONFIG_PPC64 is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_PPC_970_NAP is not set -CONFIG_PPC_ADV_DEBUG_DACS=2 -CONFIG_PPC_ADV_DEBUG_DVCS=0 -CONFIG_PPC_ADV_DEBUG_IACS=2 -CONFIG_PPC_ADV_DEBUG_REGS=y -CONFIG_PPC_BOOK3E_MMU=y -# CONFIG_PPC_BOOK3S_32 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PPC_COPRO_BASE is not set -# CONFIG_PPC_DCR_MMIO is not set -# CONFIG_PPC_DCR_NATIVE is not set -CONFIG_PPC_DOORBELL=y -# CONFIG_PPC_E500MC is not set -# CONFIG_PPC_EARLY_DEBUG is not set -# CONFIG_PPC_EPAPR_HV_PIC is not set -CONFIG_PPC_FSL_BOOK3E=y -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_ICP_HV is not set -# CONFIG_PPC_ICP_NATIVE is not set -# CONFIG_PPC_ICS_RTAS is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_P7_NAP is not set -CONFIG_PPC_PCI_CHOICE=y -# CONFIG_PPC_PTDUMP is not set -# CONFIG_PPC_QEMU_E500 is not set -# CONFIG_PPC_RTAS is not set -CONFIG_PPC_SMP_MUXED_IPI=y -CONFIG_PPC_UDBG_16550=y -CONFIG_PPC_WERROR=y -# CONFIG_PPC_XICS is not set -# CONFIG_PPC_XIVE is not set -# CONFIG_PPC_XIVE_SPAPR is not set -# CONFIG_PQ2ADS is not set -CONFIG_QE_GPIO=y -CONFIG_QE_USB=y -CONFIG_QUICC_ENGINE=y -CONFIG_RAS=y -# CONFIG_RCU_NEED_SEGCBLIST is not set -# CONFIG_RCU_STALL_COMMON is not set -# CONFIG_RED_15W_REV1 is not set -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_GENERIC=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_SBC8548 is not set -# CONFIG_SCHED_INFO is not set -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_SERIAL_QE is not set -CONFIG_SIMPLE_GPIO=y -# CONFIG_SOCRATES is not set -CONFIG_SPARSE_IRQ=y -CONFIG_SPE=y -CONFIG_SPE_POSSIBLE=y -CONFIG_SPI=y -CONFIG_SPI_FSL_ESPI=y -CONFIG_SPI_MASTER=y -CONFIG_SRCU=y -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_STX_GP3 is not set -CONFIG_SWCONFIG=y -CONFIG_SWIOTLB=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_THREAD_SHIFT=13 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TINY_SRCU=y -# CONFIG_TL_WDR4900_V1 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_TWR_P102x is not set -CONFIG_UCC=y -CONFIG_UCC_FAST=y -CONFIG_UCC_GETH=y -# CONFIG_UGETH_TX_ON_DEMAND is not set -CONFIG_USB_SUPPORT=y -CONFIG_VDSO32=y -# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_XES_MPC85xx is not set -# CONFIG_XPS_USB_HCD_XILINX is not set -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_POWERPC=y diff --git a/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch b/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch deleted file mode 100644 index 58c4be6007..0000000000 --- a/target/linux/mpc85xx/patches-4.14/001-powerpc-85xx-add-gpio-keys-to-of-match-table.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/common.c -+++ b/arch/powerpc/platforms/85xx/common.c -@@ -33,6 +33,7 @@ static const struct of_device_id mpc85xx - { .compatible = "fsl,mpc8548-guts", }, - /* Probably unnecessary? */ - { .compatible = "gpio-leds", }, -+ { .compatible = "gpio-keys", }, - /* For all PCI controllers */ - { .compatible = "fsl,mpc8540-pci", }, - { .compatible = "fsl,mpc8548-pcie", }, diff --git a/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch deleted file mode 100644 index 86b6a57735..0000000000 --- a/target/linux/mpc85xx/patches-4.14/100-powerpc-85xx-tl-wdr4900-v1-support.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 53bc6ae5da3b2902581c30ac2568f51ce35e7624 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 20 Feb 2013 08:40:33 +0100 -Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1 - board - -This patch adds support for the TP-Link TL-WDR4900 v1 -concurrent dual-band wireless router. The devices uses -the Freescale P1014 SoC. - -Signed-off-by: Gabor Juhos -Signed-off-by: Pawel Dembicki ---- - arch/powerpc/boot/Makefile | 3 ++- - arch/powerpc/boot/wrapper | 5 +++++ - arch/powerpc/platforms/85xx/Kconfig | 11 +++++++++++ - arch/powerpc/platforms/85xx/Makefile | 1 + - 4 files changed, 19 insertions(+), 1 deletion(-) - ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -156,6 +156,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie - src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S - src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S - src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c -+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S - - src-wlib := $(sort $(src-wlib-y)) - src-plat := $(sort $(src-plat-y)) -@@ -335,7 +336,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm - image-$(CONFIG_TQM8560) += cuImage.tqm8560 - image-$(CONFIG_SBC8548) += cuImage.sbc8548 - image-$(CONFIG_KSI8560) += cuImage.ksi8560 -- -+image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1 - # Board ports in arch/powerpc/platform/86xx/Kconfig - image-$(CONFIG_MVME7100) += dtbImage.mvme7100 - ---- a/arch/powerpc/boot/wrapper -+++ b/arch/powerpc/boot/wrapper -@@ -302,6 +302,11 @@ adder875-redboot) - platformo="$object/fixed-head.o $object/redboot-8xx.o" - binary=y - ;; -+simpleboot-tl-wdr4900-v1) -+ platformo="$object/fixed-head.o $object/simpleboot.o" -+ link_address='0x1000000' -+ binary=y -+ ;; - simpleboot-virtex405-*) - platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o" - binary=y ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -170,6 +170,17 @@ config STX_GP3 - select CPM2 - select DEFAULT_UIMAGE - -+config TL_WDR4900_V1 -+ bool "TP-Link TL-WDR4900 v1" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the TP-Link TL-WDR4900 v1 board. -+ -+ This board is a Concurrent Dual-Band wireless router with a -+ Freescale P1014 SoC. -+ - config TQM8540 - bool "TQ Components TQM8540" - help ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren - obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o - obj-$(CONFIG_STX_GP3) += stx_gp3.o - obj-$(CONFIG_TQM85xx) += tqm85xx.o -+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o - obj-$(CONFIG_SBC8548) += sbc8548.o - obj-$(CONFIG_PPA8548) += ppa8548.o - obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o diff --git a/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch deleted file mode 100644 index 34568398c2..0000000000 --- a/target/linux/mpc85xx/patches-4.14/101-powerpc-85xx-hiveap-330-support.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -49,6 +49,17 @@ config BSC9132_QDS - and dual StarCore SC3850 DSP cores. - Manufacturer : Freescale Semiconductor, Inc - -+config HIVEAP_330 -+ bool "Aerohive HiveAP-330" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the Aerohive HiveAP-330 board. -+ -+ This board is a Concurrent Dual-Band wireless access point with a -+ Freescale P1020 SoC. -+ - config MPC8540_ADS - bool "Freescale MPC8540 ADS" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -10,6 +10,7 @@ obj-y += common.o - obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o - obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o - obj-$(CONFIG_C293_PCIE) += c293pcie.o -+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o - obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o - obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o - obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch b/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch deleted file mode 100644 index 087798e3d8..0000000000 --- a/target/linux/mpc85xx/patches-4.14/102-powerpc-add-cmdline-override.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/powerpc/Kconfig -+++ b/arch/powerpc/Kconfig -@@ -837,6 +837,14 @@ config CMDLINE_FORCE - This is useful if you cannot or don't want to change the - command-line options your boot loader passes to the kernel. - -+config CMDLINE_OVERRIDE -+ bool "Use alternative cmdline from device tree" -+ help -+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can -+ be used, this is not a good option for kernels that are shared across -+ devices. This setting enables using "chosen/cmdline-override" as the -+ cmdline if it exists in the device tree. -+ - config EXTRA_TARGETS - string "Additional default image types" - help ---- a/drivers/of/fdt.c -+++ b/drivers/of/fdt.c -@@ -1131,6 +1131,17 @@ int __init early_init_dt_scan_chosen(uns - if (p != NULL && l > 0) - strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); - -+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different -+ * device tree option of chosen/bootargs-override. This is -+ * helpful on boards where u-boot sets bootargs, and is unable -+ * to be modified. -+ */ -+#ifdef CONFIG_CMDLINE_OVERRIDE -+ p = of_get_flat_dt_prop(node, "bootargs-override", &l); -+ if (p != NULL && l > 0) -+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); -+#endif -+ - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else - * managed to set the command line, unless CONFIG_CMDLINE_FORCE diff --git a/target/linux/mpc85xx/patches-4.14/103-powerpc-fix-build-cross32ar.patch b/target/linux/mpc85xx/patches-4.14/103-powerpc-fix-build-cross32ar.patch deleted file mode 100644 index 7ed52f649c..0000000000 --- a/target/linux/mpc85xx/patches-4.14/103-powerpc-fix-build-cross32ar.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/powerpc/Makefile -+++ b/arch/powerpc/Makefile -@@ -23,6 +23,7 @@ CROSS32AR := $(CROSS32_COMPILE)ar - ifeq ($(HAS_BIARCH),y) - ifeq ($(CROSS32_COMPILE),) - CROSS32CC := $(CC) -m32 -+CROSS32AR := $(AR) - KBUILD_ARFLAGS += --target=elf32-powerpc - endif - endif diff --git a/target/linux/mpc85xx/patches-4.14/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch b/target/linux/mpc85xx/patches-4.14/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch deleted file mode 100644 index 39c72314b8..0000000000 --- a/target/linux/mpc85xx/patches-4.14/104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch +++ /dev/null @@ -1,170 +0,0 @@ -From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001 -From: Pawel Dembicki -Date: Sun, 30 Dec 2018 23:24:41 +0100 -Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT - -This patch apply chages for OpenWRT in P2020RDB -dts file. - -Signed-off-by: Pawel Dembicki ---- - arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++--------- - 1 file changed, 63 insertions(+), 35 deletions(-) - ---- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts -+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts -@@ -2,6 +2,7 @@ - * P2020 RDB Device Tree Source - * - * Copyright 2009-2012 Freescale Semiconductor Inc. -+ * Copyright 2018 Pawel Dembicki - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the -@@ -9,10 +10,15 @@ - * option) any later version. - */ - -+/dts-v1/; -+ - /include/ "p2020si-pre.dtsi" - -+#include -+#include -+ - / { -- model = "fsl,P2020RDB"; -+ model = "Freescale P2020RDB"; - compatible = "fsl,P2020RDB"; - - aliases { -@@ -38,48 +44,38 @@ - 0x2 0x0 0x0 0xffb00000 0x00020000>; - - nor@0,0 { -- #address-cells = <1>; -- #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x1000000>; - bank-width = <2>; - device-width = <1>; - -- partition@0 { -- /* This location must not be altered */ -- /* 256KB for Vitesse 7385 Switch firmware */ -- reg = <0x0 0x00040000>; -- label = "NOR (RO) Vitesse-7385 Firmware"; -- read-only; -- }; -- -- partition@40000 { -- /* 256KB for DTB Image */ -- reg = <0x00040000 0x00040000>; -- label = "NOR (RO) DTB Image"; -- read-only; -- }; -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; - -- partition@80000 { -- /* 3.5 MB for Linux Kernel Image */ -- reg = <0x00080000 0x00380000>; -- label = "NOR (RO) Linux Kernel Image"; -- read-only; -- }; -+ partition@0 { -+ /* This location must not be altered */ -+ /* 256KB for Vitesse 7385 Switch firmware */ -+ reg = <0x0 0x00040000>; -+ label = "NOR (RO) Vitesse-7385 Firmware"; -+ read-only; -+ }; - -- partition@400000 { -- /* 11MB for JFFS2 based Root file System */ -- reg = <0x00400000 0x00b00000>; -- label = "NOR (RW) JFFS2 Root File System"; -- }; -+ partition@40000 { -+ compatible = "denx,fit"; -+ reg = <0x00040000 0x00ec0000>; -+ label = "firmware"; -+ }; - -- partition@f00000 { -- /* This location must not be altered */ -- /* 512KB for u-boot Bootloader Image */ -- /* 512KB for u-boot Environment Variables */ -- reg = <0x00f00000 0x00100000>; -- label = "NOR (RO) U-Boot Image"; -- read-only; -+ partition@f00000 { -+ /* This location must not be altered */ -+ /* 512KB for u-boot Bootloader Image */ -+ /* 512KB for u-boot Environment Variables */ -+ reg = <0x00f00000 0x00100000>; -+ label = "u-boot"; -+ read-only; -+ }; - }; - }; - -@@ -144,13 +140,43 @@ - soc: soc@ffe00000 { - ranges = <0x0 0x0 0xffe00000 0x100000>; - -+ gpio0: gpio-controller@fc00 { -+ }; -+ - i2c@3000 { -+ temperature-sensor@4c { -+ compatible = "adi,adt7461"; -+ reg = <0x4c>; -+ }; -+ -+ eeprom@50 { -+ compatible = "atmel,24c256"; -+ reg = <0x50>; -+ }; -+ - rtc@68 { - compatible = "dallas,ds1339"; - reg = <0x68>; - }; - }; - -+ i2c@3100 { -+ pmic@11 { -+ compatible = "zl2006"; -+ reg = <0x11>; -+ }; -+ -+ gpio@18 { -+ compatible = "nxp,pca9557"; -+ reg = <0x18>; -+ }; -+ -+ eeprom@52 { -+ compatible = "atmel,24c01"; -+ reg = <0x52>; -+ }; -+ }; -+ - spi@7000 { - flash@0 { - #address-cells = <1>; -@@ -204,10 +230,12 @@ - phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; - reg = <0x0>; -+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - phy1: ethernet-phy@1 { - interrupts = <3 1 0 0>; - reg = <0x1>; -+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - }; - tbi-phy@2 { - device_type = "tbi-phy"; diff --git a/target/linux/mpc85xx/patches-4.14/105-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-4.14/105-powerpc-85xx-red-15w-rev1.patch deleted file mode 100644 index 42bcd58de0..0000000000 --- a/target/linux/mpc85xx/patches-4.14/105-powerpc-85xx-red-15w-rev1.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -173,6 +173,16 @@ config XES_MPC85xx - Manufacturer: Extreme Engineering Solutions, Inc. - URL: - -+config RED_15W_REV1 -+ bool "Sophos RED 15w Rev.1" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the SOPHOS RED 15w Rev.1 board. -+ -+ This board is a wireless VPN router with a Freescale P1010 SoC. -+ - config STX_GP3 - bool "Silicon Turnkey Express GP3" - help ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o - obj-$(CONFIG_TWR_P102x) += twr_p102x.o - obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o - obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o -+obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o - obj-$(CONFIG_STX_GP3) += stx_gp3.o - obj-$(CONFIG_TQM85xx) += tqm85xx.o - obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o diff --git a/target/linux/mpc85xx/patches-4.14/106-powerpc-85xx-panda-support.patch b/target/linux/mpc85xx/patches-4.14/106-powerpc-85xx-panda-support.patch deleted file mode 100644 index a08bc302f2..0000000000 --- a/target/linux/mpc85xx/patches-4.14/106-powerpc-85xx-panda-support.patch +++ /dev/null @@ -1,30 +0,0 @@ ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -60,6 +60,17 @@ config HIVEAP_330 - This board is a Concurrent Dual-Band wireless access point with a - Freescale P1020 SoC. - -+config PANDA -+ bool "OCEDO PANDA" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the OCEDO PANDA board. -+ -+ This board is a Concurrent Dual-Band wireless access point with a -+ Freescale P1020 SoC. -+ - config MPC8540_ADS - bool "Freescale MPC8540 ADS" - select DEFAULT_UIMAGE ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o - obj-$(CONFIG_P1022_DS) += p1022_ds.o - obj-$(CONFIG_P1022_RDK) += p1022_rdk.o - obj-$(CONFIG_P1023_RDB) += p1023_rdb.o -+obj-$(CONFIG_PANDA) += panda.o - obj-$(CONFIG_TWR_P102x) += twr_p102x.o - obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o - obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o -- 2.30.2