From 3367b8d4278d1f8a28995cc5e57a995f7147cb73 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 Sep 2010 17:34:58 +0100 Subject: [PATCH] ASoC: Add support for WM8962 GPIO outputs The WM8962 features five GPIOs, add support for controlling their output state via gpiolib. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- include/sound/wm8962.h | 1 + sound/soc/codecs/wm8962.c | 119 ++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8962.h | 1 + 3 files changed, 121 insertions(+) diff --git a/include/sound/wm8962.h b/include/sound/wm8962.h index 9722aac5a138..2b5306c503fb 100644 --- a/include/sound/wm8962.h +++ b/include/sound/wm8962.h @@ -15,6 +15,7 @@ #define WM8962_GPIO_SET 0x10000 struct wm8962_pdata { + int gpio_base; u32 gpio_init[WM8962_MAX_GPIO]; /* Setup for microphone detection, raw value to be written to diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 38cbf85688f6..eb66c66047b1 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -70,6 +71,10 @@ struct wm8962_priv { struct work_struct beep_work; int beep_rate; #endif + +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio_chip; +#endif }; /* We can't use the same notifier block for more than one supply and @@ -1646,6 +1651,118 @@ static void wm8962_free_beep(struct snd_soc_codec *codec) } #endif +#ifdef CONFIG_GPIOLIB +static inline struct wm8962_priv *gpio_to_wm8962(struct gpio_chip *chip) +{ + return container_of(chip, struct wm8962_priv, gpio_chip); +} + +static int wm8962_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct wm8962_priv *wm8962 = gpio_to_wm8962(chip); + struct snd_soc_codec *codec = wm8962->codec; + int mask = 0; + int val; + + /* The WM8962 GPIOs aren't linearly numbered. For simplicity + * we export linear numbers and error out if the unsupported + * ones are requsted. + */ + switch (offset + 1) { + case 2: + mask = WM8962_CLKOUT2_SEL_MASK; + val = 1 << WM8962_CLKOUT2_SEL_SHIFT; + break; + case 3: + mask = WM8962_CLKOUT3_SEL_MASK; + val = 1 << WM8962_CLKOUT3_SEL_SHIFT; + break; + case 5: + case 6: + break; + default: + return -EINVAL; + } + + /* Some of the GPIOs are behind MFP configuration */ + if (mask) + snd_soc_update_bits(codec, WM8962_ANALOGUE_CLOCKING1, + mask, val); + + return 0; +} + +static void wm8962_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct wm8962_priv *wm8962 = gpio_to_wm8962(chip); + struct snd_soc_codec *codec = wm8962->codec; + + snd_soc_update_bits(codec, WM8962_GPIO_BASE + offset, + WM8962_GP2_LVL, value << WM8962_GP2_LVL_SHIFT); +} + +static int wm8962_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct wm8962_priv *wm8962 = gpio_to_wm8962(chip); + struct snd_soc_codec *codec = wm8962->codec; + int val; + + /* Force function 1 (logic output) */ + val = (1 << WM8962_GP2_FN_SHIFT) | (value << WM8962_GP2_LVL_SHIFT); + + return snd_soc_update_bits(codec, WM8962_GPIO_BASE + offset, + WM8962_GP2_FN_MASK | WM8962_GP2_LVL, val); +} + +static struct gpio_chip wm8962_template_chip = { + .label = "wm8962", + .owner = THIS_MODULE, + .request = wm8962_gpio_request, + .direction_output = wm8962_gpio_direction_out, + .set = wm8962_gpio_set, + .can_sleep = 1, +}; + +static void wm8962_init_gpio(struct snd_soc_codec *codec) +{ + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + struct wm8962_pdata *pdata = dev_get_platdata(codec->dev); + int ret; + + wm8962->gpio_chip = wm8962_template_chip; + wm8962->gpio_chip.ngpio = WM8962_MAX_GPIO; + wm8962->gpio_chip.dev = codec->dev; + + if (pdata && pdata->gpio_base) + wm8962->gpio_chip.base = pdata->gpio_base; + else + wm8962->gpio_chip.base = -1; + + ret = gpiochip_add(&wm8962->gpio_chip); + if (ret != 0) + dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret); +} + +static void wm8962_free_gpio(struct snd_soc_codec *codec) +{ + struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec); + int ret; + + ret = gpiochip_remove(&wm8962->gpio_chip); + if (ret != 0) + dev_err(codec->dev, "Failed to remove GPIOs: %d\n", ret); +} +#else +static void wm8962_init_gpio(struct snd_soc_codec *codec) +{ +} + +static void wm8962_free_gpio(struct snd_soc_codec *codec) +{ +} +#endif + static int wm8962_probe(struct snd_soc_codec *codec) { int ret; @@ -1778,6 +1895,7 @@ static int wm8962_probe(struct snd_soc_codec *codec) wm8962_add_widgets(codec); wm8962_init_beep(codec); + wm8962_init_gpio(codec); if (i2c->irq) { if (pdata && pdata->irq_active_low) { @@ -1828,6 +1946,7 @@ static int wm8962_remove(struct snd_soc_codec *codec) if (i2c->irq) free_irq(i2c->irq, codec); + wm8962_free_gpio(codec); wm8962_free_beep(codec); for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++) regulator_unregister_notifier(wm8962->supplies[i].consumer, diff --git a/sound/soc/codecs/wm8962.h b/sound/soc/codecs/wm8962.h index 6145399acb16..fce11998b278 100644 --- a/sound/soc/codecs/wm8962.h +++ b/sound/soc/codecs/wm8962.h @@ -181,6 +181,7 @@ #define WM8962_EQ39 0x175 #define WM8962_EQ40 0x176 #define WM8962_EQ41 0x177 +#define WM8962_GPIO_BASE 0x200 #define WM8962_GPIO_2 0x201 #define WM8962_GPIO_3 0x202 #define WM8962_GPIO_5 0x204 -- 2.30.2