From 3342ecda3ffb059f2ffd765a71d9579f0aa036eb Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 3 Dec 2009 11:35:59 -0800 Subject: [PATCH] USB: usbtmc: Use usb_clear_halt() instead of custom code. Make the USB Test & Measurement driver use usb_clear_halt() instead of usb_control_msg() to clear a stalled endpoint. This will allow devices to be tested under an xHCI host controller. The endpoint stall will not be cleared in the internal xHCI hardware state unless usb_clear_halt() is used. Signed-off-by: Sarah Sharp Cc: Steve Holland Cc: Oliver Neukum Cc: Jouni Ryno Cc: Gergely Imreh Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usbtmc.c | 36 ++++++++---------------------------- 1 file changed, 8 insertions(+), 28 deletions(-) diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 619cc9975209..7c5f4e32c920 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -347,13 +347,8 @@ usbtmc_abort_bulk_out_check_status: goto exit; usbtmc_abort_bulk_out_clear_halt: - rv = usb_control_msg(data->usb_dev, - usb_sndctrlpipe(data->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, data->bulk_out, buffer, - 0, USBTMC_TIMEOUT); + rv = usb_clear_halt(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, data->bulk_out)); if (rv < 0) { dev_err(dev, "usb_control_msg returned %d\n", rv); @@ -708,14 +703,8 @@ usbtmc_clear_check_status: usbtmc_clear_bulk_out_halt: - rv = usb_control_msg(data->usb_dev, - usb_sndctrlpipe(data->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, - data->bulk_out, buffer, 0, - USBTMC_TIMEOUT); + rv = usb_clear_halt(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, data->bulk_out)); if (rv < 0) { dev_err(dev, "usb_control_msg returned %d\n", rv); goto exit; @@ -736,13 +725,8 @@ static int usbtmc_ioctl_clear_out_halt(struct usbtmc_device_data *data) if (!buffer) return -ENOMEM; - rv = usb_control_msg(data->usb_dev, - usb_sndctrlpipe(data->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, data->bulk_out, - buffer, 0, USBTMC_TIMEOUT); + rv = usb_clear_halt(data->usb_dev, + usb_sndbulkpipe(data->usb_dev, data->bulk_out)); if (rv < 0) { dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", @@ -765,12 +749,8 @@ static int usbtmc_ioctl_clear_in_halt(struct usbtmc_device_data *data) if (!buffer) return -ENOMEM; - rv = usb_control_msg(data->usb_dev, usb_sndctrlpipe(data->usb_dev, 0), - USB_REQ_CLEAR_FEATURE, - USB_DIR_OUT | USB_TYPE_STANDARD | - USB_RECIP_ENDPOINT, - USB_ENDPOINT_HALT, data->bulk_in, buffer, 0, - USBTMC_TIMEOUT); + rv = usb_clear_halt(data->usb_dev, + usb_rcvbulkpipe(data->usb_dev, data->bulk_in)); if (rv < 0) { dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", -- 2.30.2