From 33046d2a471ed687404a617c356b9cdf5652c2d6 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Mon, 28 Aug 2023 23:44:52 +0100 Subject: [PATCH] arm-trusted-firmware-mediatek: enable built-in 2.5G PHY on MT7988 Always enable built-in 2.5G PHY on MT7988 for now, so that it can be used. In future it would be nice to be able to switch power and MDIO access via address 0 at run-time in Linux, both, to be able to use external PHYs at address 0 and to reduce power consumption on systems not using the built-in 2.5G PHY. Signed-off-by: Daniel Golle --- .../patches/001-mt7988-enable-2p5g-phy.patch | 11 +++++++++++ 1 file changed, 11 insertions(+) create mode 100644 package/boot/arm-trusted-firmware-mediatek/patches/001-mt7988-enable-2p5g-phy.patch diff --git a/package/boot/arm-trusted-firmware-mediatek/patches/001-mt7988-enable-2p5g-phy.patch b/package/boot/arm-trusted-firmware-mediatek/patches/001-mt7988-enable-2p5g-phy.patch new file mode 100644 index 00000000000..d377bd8433c --- /dev/null +++ b/package/boot/arm-trusted-firmware-mediatek/patches/001-mt7988-enable-2p5g-phy.patch @@ -0,0 +1,11 @@ +--- a/plat/mediatek/mt7988/bl2/bl2_plat_init.c ++++ b/plat/mediatek/mt7988/bl2/bl2_plat_init.c +@@ -90,6 +90,8 @@ static void mtk_i2p5g_phy_init(void) + * clear bit 22 to use external MDIO. + */ + mmio_setbits_32(GBE_TOP_REG, I2P5G_MDIO); ++ /* Internal 2.5Gphy power on sequence */ ++ eth_2p5g_phy_mtcmos_ctrl(true); + } + + static void mt7988_i2c_init(void) -- 2.30.2