From 32edd2ede2bd62d27c45bd9bdbc0b4a2848f4587 Mon Sep 17 00:00:00 2001 From: Tom Warren Date: Fri, 24 Jan 2014 12:46:14 -0700 Subject: [PATCH] ARM: tegra: add SPL/AVP (arm720t) CPU files for Tegra124 This provides SPL support for Tegra124 boards - AVP early init, plus CPU (A15) init/jump to main U-Boot. Signed-off-by: Tom Warren Signed-off-by: Stephen Warren Tested-by: Thierry Reding Signed-off-by: Tom Warren --- arch/arm/cpu/arm720t/tegra-common/cpu.c | 36 +++- arch/arm/cpu/arm720t/tegra-common/cpu.h | 4 +- arch/arm/cpu/arm720t/tegra124/Makefile | 8 + arch/arm/cpu/arm720t/tegra124/config.mk | 7 + arch/arm/cpu/arm720t/tegra124/cpu.c | 265 ++++++++++++++++++++++++ 5 files changed, 318 insertions(+), 2 deletions(-) create mode 100644 arch/arm/cpu/arm720t/tegra124/Makefile create mode 100644 arch/arm/cpu/arm720t/tegra124/config.mk create mode 100644 arch/arm/cpu/arm720t/tegra124/cpu.c diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c index d62bb9e370..2c5cd63917 100644 --- a/arch/arm/cpu/arm720t/tegra-common/cpu.c +++ b/arch/arm/cpu/arm720t/tegra-common/cpu.c @@ -112,8 +112,40 @@ struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = { { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */ { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */ }, + + /* + * T124: 700 MHz + * + * Register Field Bits Width + * ------------------------------ + * PLLX_BASE p 23:20 4 + * PLLX_BASE n 15: 8 8 + * PLLX_BASE m 7: 0 8 + */ + { + { .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */ + { .n = 73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */ + { .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */ + { .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */ + }, }; +static inline void pllx_set_iddq(void) +{ +#if defined(CONFIG_TEGRA124) + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + /* Disable IDDQ */ + reg = readl(&clkrst->crc_pllx_misc3); + reg &= ~PLLX_IDDQ_MASK; + writel(reg, &clkrst->crc_pllx_misc3); + udelay(2); + debug("%s: IDDQ: PLLX IDDQ = 0x%08X\n", __func__, + readl(&clkrst->crc_pllx_misc3)); +#endif +} + int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, u32 divp, u32 cpcon) { @@ -128,6 +160,8 @@ int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm, debug(" pllx_set_rate entry\n"); + pllx_set_iddq(); + /* Set BYPASS, m, n and p to PLLX_BASE */ reg = PLL_BYPASS_MASK | (divm << PLL_DIVM_SHIFT); reg |= ((divn << PLL_DIVN_SHIFT) | (divp << PLL_DIVP_SHIFT)); @@ -323,7 +357,7 @@ void clock_enable_coresight(int enable) if (enable) { /* * Put CoreSight on PLLP_OUT0 and divide it down as per - * PLLP base frequency based on SoC type (T20/T30/T114). + * PLLP base frequency based on SoC type (T20/T30+). * Clock divider request would setup CSITE clock as 144MHz * for PLLP base 216MHz and 204MHz for PLLP base 408MHz */ diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.h b/arch/arm/cpu/arm720t/tegra-common/cpu.h index d1520ce2cc..b4ca44fce1 100644 --- a/arch/arm/cpu/arm720t/tegra-common/cpu.h +++ b/arch/arm/cpu/arm720t/tegra-common/cpu.h @@ -13,7 +13,8 @@ #if defined(CONFIG_TEGRA20) #define NVBL_PLLP_KHZ 216000 #define CSITE_KHZ 144000 -#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) +#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) || \ + defined(CONFIG_TEGRA124) #define NVBL_PLLP_KHZ 408000 #define CSITE_KHZ 204000 #else @@ -70,3 +71,4 @@ int tegra_get_chip(void); int tegra_get_sku_info(void); int tegra_get_chip_sku(void); void adjust_pllp_out_freqs(void); +void pmic_enable_cpu_vdd(void); diff --git a/arch/arm/cpu/arm720t/tegra124/Makefile b/arch/arm/cpu/arm720t/tegra124/Makefile new file mode 100644 index 0000000000..61abf45d3d --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra124/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2013-2014 +# NVIDIA Corporation +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += cpu.o diff --git a/arch/arm/cpu/arm720t/tegra124/config.mk b/arch/arm/cpu/arm720t/tegra124/config.mk new file mode 100644 index 0000000000..5e10701f0e --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra124/config.mk @@ -0,0 +1,7 @@ +# +# (C) Copyright 2010-2013 +# NVIDIA Corporation +# +# SPDX-License-Identifier: GPL-2.0+ +#/ +USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra124/cpu.c b/arch/arm/cpu/arm720t/tegra124/cpu.c new file mode 100644 index 0000000000..c03aaf17e9 --- /dev/null +++ b/arch/arm/cpu/arm720t/tegra124/cpu.c @@ -0,0 +1,265 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../tegra-common/cpu.h" + +/* Tegra124-specific CPU init code */ + +static void enable_cpu_power_rail(void) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + debug("enable_cpu_power_rail entry\n"); + + /* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */ + pinmux_tristate_disable(PINGRP_PWR_I2C_SCL); + pinmux_tristate_disable(PINGRP_PWR_I2C_SDA); + + pmic_enable_cpu_vdd(); + + /* + * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz), + * set it for 5ms as per SysEng (102MHz*5ms = 510000 (7C830h). + */ + writel(0x7C830, &pmc->pmc_cpupwrgood_timer); + + /* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */ + clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL); + setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE); +} + +static void enable_cpu_clocks(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + debug("enable_cpu_clocks entry\n"); + + /* Wait for PLL-X to lock */ + do { + reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); + debug("%s: PLLX base = 0x%08X\n", __func__, reg); + } while ((reg & PLL_LOCK_MASK) == 0); + + debug("%s: PLLX locked, delay for stable clocks\n", __func__); + /* Wait until all clocks are stable */ + udelay(PLL_STABILIZATION_DELAY); + + debug("%s: Setting CCLK_BURST and DIVIDER\n", __func__); + writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol); + writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div); + + debug("%s: Enabling clock to all CPUs\n", __func__); + /* Enable the clock to all CPUs */ + reg = CLR_CPU3_CLK_STP | CLR_CPU2_CLK_STP | CLR_CPU1_CLK_STP | + CLR_CPU0_CLK_STP; + writel(reg, &clkrst->crc_clk_cpu_cmplx_clr); + + debug("%s: Enabling main CPU complex clocks\n", __func__); + /* Always enable the main CPU complex clocks */ + clock_enable(PERIPH_ID_CPU); + clock_enable(PERIPH_ID_CPULP); + clock_enable(PERIPH_ID_CPUG); + + debug("%s: Done\n", __func__); +} + +static void remove_cpu_resets(void) +{ + struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 reg; + + debug("remove_cpu_resets entry\n"); + + /* Take the slow and fast partitions out of reset */ + reg = CLR_NONCPURESET; + writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr); + writel(reg, &clkrst->crc_rst_cpug_cmplx_clr); + + /* Clear the SW-controlled reset of the slow cluster */ + reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | + CLR_L2RESET | CLR_PRESETDBG; + writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr); + + /* Clear the SW-controlled reset of the fast cluster */ + reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 | + CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 | + CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 | + CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3 | + CLR_L2RESET | CLR_PRESETDBG; + writel(reg, &clkrst->crc_rst_cpug_cmplx_clr); +} + +/** + * The Tegra124 requires some special clock initialization, including setting up + * the DVC I2C, turning on MSELECT and selecting the G CPU cluster + */ +void tegra124_init_clocks(void) +{ + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + u32 val; + + debug("tegra124_init_clocks entry\n"); + + /* Set active CPU cluster to G */ + clrbits_le32(&flow->cluster_control, 1); + + /* Change the oscillator drive strength */ + val = readl(&clkrst->crc_osc_ctrl); + val &= ~OSC_XOFS_MASK; + val |= (OSC_DRIVE_STRENGTH << OSC_XOFS_SHIFT); + writel(val, &clkrst->crc_osc_ctrl); + + /* Update same value in PMC_OSC_EDPD_OVER XOFS field for warmboot */ + val = readl(&pmc->pmc_osc_edpd_over); + val &= ~PMC_XOFS_MASK; + val |= (OSC_DRIVE_STRENGTH << PMC_XOFS_SHIFT); + writel(val, &pmc->pmc_osc_edpd_over); + + /* Set HOLD_CKE_LOW_EN to 1 */ + setbits_le32(&pmc->pmc_cntrl2, HOLD_CKE_LOW_EN); + + debug("Setting up PLLX\n"); + init_pllx(); + + val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT); + writel(val, &clkrst->crc_clk_sys_rate); + + /* Enable clocks to required peripherals. TBD - minimize this list */ + debug("Enabling clocks\n"); + + clock_set_enable(PERIPH_ID_CACHE2, 1); + clock_set_enable(PERIPH_ID_GPIO, 1); + clock_set_enable(PERIPH_ID_TMR, 1); + clock_set_enable(PERIPH_ID_CPU, 1); + clock_set_enable(PERIPH_ID_EMC, 1); + clock_set_enable(PERIPH_ID_I2C5, 1); + clock_set_enable(PERIPH_ID_APBDMA, 1); + clock_set_enable(PERIPH_ID_MEM, 1); + clock_set_enable(PERIPH_ID_CORESIGHT, 1); + clock_set_enable(PERIPH_ID_MSELECT, 1); + clock_set_enable(PERIPH_ID_DVFS, 1); + + /* + * Set MSELECT clock source as PLLP (00), and ask for a clock + * divider that would set the MSELECT clock at 102MHz for a + * PLLP base of 408MHz. + */ + clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, + CLK_DIVIDER(NVBL_PLLP_KHZ, 102000)); + + /* Give clock time to stabilize */ + udelay(IO_STABILIZATION_DELAY); + + /* I2C5 (DVC) gets CLK_M and a divisor of 17 */ + clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16); + + /* Give clock time to stabilize */ + udelay(IO_STABILIZATION_DELAY); + + /* Take required peripherals out of reset */ + debug("Taking periphs out of reset\n"); + reset_set_enable(PERIPH_ID_CACHE2, 0); + reset_set_enable(PERIPH_ID_GPIO, 0); + reset_set_enable(PERIPH_ID_TMR, 0); + reset_set_enable(PERIPH_ID_COP, 0); + reset_set_enable(PERIPH_ID_EMC, 0); + reset_set_enable(PERIPH_ID_I2C5, 0); + reset_set_enable(PERIPH_ID_APBDMA, 0); + reset_set_enable(PERIPH_ID_MEM, 0); + reset_set_enable(PERIPH_ID_CORESIGHT, 0); + reset_set_enable(PERIPH_ID_MSELECT, 0); + reset_set_enable(PERIPH_ID_DVFS, 0); + + debug("tegra124_init_clocks exit\n"); +} + +static bool is_partition_powered(u32 partid) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + u32 reg; + + /* Get power gate status */ + reg = readl(&pmc->pmc_pwrgate_status); + return !!(reg & (1 << partid)); +} + +static void power_partition(u32 partid) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + debug("%s: part ID = %08X\n", __func__, partid); + /* Is the partition already on? */ + if (!is_partition_powered(partid)) { + /* No, toggle the partition power state (OFF -> ON) */ + debug("power_partition, toggling state\n"); + writel(START_CP | partid, &pmc->pmc_pwrgate_toggle); + + /* Wait for the power to come up */ + while (!is_partition_powered(partid)) + ; + + /* Give I/O signals time to stabilize */ + udelay(IO_STABILIZATION_DELAY); + } +} + +void powerup_cpus(void) +{ + debug("powerup_cpus entry\n"); + + /* We boot to the fast cluster */ + debug("powerup_cpus entry: G cluster\n"); + + /* Power up the fast cluster rail partition */ + debug("powerup_cpus: CRAIL\n"); + power_partition(CRAIL); + + /* Power up the fast cluster non-CPU partition */ + debug("powerup_cpus: C0NC\n"); + power_partition(C0NC); + + /* Power up the fast cluster CPU0 partition */ + debug("powerup_cpus: CE0\n"); + power_partition(CE0); + + debug("powerup_cpus: done\n"); +} + +void start_cpu(u32 reset_vector) +{ + struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; + + debug("start_cpu entry, reset_vector = %x\n", reset_vector); + + tegra124_init_clocks(); + + /* Set power-gating timer multiplier */ + clrbits_le32(&pmc->pmc_pwrgate_timer_mult, TIMER_MULT_MASK); + setbits_le32(&pmc->pmc_pwrgate_timer_mult, MULT_8); + + enable_cpu_power_rail(); + enable_cpu_clocks(); + clock_enable_coresight(1); + remove_cpu_resets(); + writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); + powerup_cpus(); + debug("start_cpu exit, should continue @ reset_vector\n"); +} -- 2.30.2