From 32d3b6de6817359311eb6b5a2de0173f3357321f Mon Sep 17 00:00:00 2001 From: Peng Tao Date: Mon, 9 Dec 2013 22:56:53 +0800 Subject: [PATCH] staging/lustre: remove server macros from lustre_net.h These macros are only used on server side. Cc: Andreas Dilger Signed-off-by: Peng Tao Signed-off-by: Greg Kroah-Hartman --- .../lustre/lustre/include/lustre_net.h | 234 ------------------ 1 file changed, 234 deletions(-) diff --git a/drivers/staging/lustre/lustre/include/lustre_net.h b/drivers/staging/lustre/lustre/include/lustre_net.h index 6c5479b2d715..d8d088035428 100644 --- a/drivers/staging/lustre/lustre/include/lustre_net.h +++ b/drivers/staging/lustre/lustre/include/lustre_net.h @@ -264,241 +264,7 @@ #define LDLM_MAXREQSIZE (5 * 1024) #define LDLM_MAXREPSIZE (1024) - /* - * MDS threads constants: - * - * Please see examples in "Thread Constants", MDS threads number will be at - * the comparable level of old versions, unless the server has many cores. - */ -#ifndef MDS_MAX_THREADS -#define MDS_MAX_THREADS 1024 -#define MDS_MAX_OTHR_THREADS 256 - -#else /* MDS_MAX_THREADS */ -#if MDS_MAX_THREADS < PTLRPC_NTHRS_INIT -#undef MDS_MAX_THREADS -#define MDS_MAX_THREADS PTLRPC_NTHRS_INIT -#endif -#define MDS_MAX_OTHR_THREADS max(PTLRPC_NTHRS_INIT, MDS_MAX_THREADS / 2) -#endif - -/* default service */ -#define MDS_THR_FACTOR 8 -#define MDS_NTHRS_INIT PTLRPC_NTHRS_INIT -#define MDS_NTHRS_MAX MDS_MAX_THREADS -#define MDS_NTHRS_BASE min(64, MDS_NTHRS_MAX) - -/* read-page service */ -#define MDS_RDPG_THR_FACTOR 4 -#define MDS_RDPG_NTHRS_INIT PTLRPC_NTHRS_INIT -#define MDS_RDPG_NTHRS_MAX MDS_MAX_OTHR_THREADS -#define MDS_RDPG_NTHRS_BASE min(48, MDS_RDPG_NTHRS_MAX) - -/* these should be removed when we remove setattr service in the future */ -#define MDS_SETA_THR_FACTOR 4 -#define MDS_SETA_NTHRS_INIT PTLRPC_NTHRS_INIT -#define MDS_SETA_NTHRS_MAX MDS_MAX_OTHR_THREADS -#define MDS_SETA_NTHRS_BASE min(48, MDS_SETA_NTHRS_MAX) - -/* non-affinity threads */ -#define MDS_OTHR_NTHRS_INIT PTLRPC_NTHRS_INIT -#define MDS_OTHR_NTHRS_MAX MDS_MAX_OTHR_THREADS - -#define MDS_NBUFS 64 - -/** - * Assume file name length = FNAME_MAX = 256 (true for ext3). - * path name length = PATH_MAX = 4096 - * LOV MD size max = EA_MAX = 24 * 2000 - * (NB: 24 is size of lov_ost_data) - * LOV LOGCOOKIE size max = 32 * 2000 - * (NB: 32 is size of llog_cookie) - * symlink: FNAME_MAX + PATH_MAX <- largest - * link: FNAME_MAX + PATH_MAX (mds_rec_link < mds_rec_create) - * rename: FNAME_MAX + FNAME_MAX - * open: FNAME_MAX + EA_MAX - * - * MDS_MAXREQSIZE ~= 4736 bytes = - * lustre_msg + ldlm_request + mdt_body + mds_rec_create + FNAME_MAX + PATH_MAX - * MDS_MAXREPSIZE ~= 8300 bytes = lustre_msg + llog_header - * - * Realistic size is about 512 bytes (20 character name + 128 char symlink), - * except in the open case where there are a large number of OSTs in a LOV. - */ -#define MDS_MAXREQSIZE (5 * 1024) /* >= 4736 */ -#define MDS_MAXREPSIZE (9 * 1024) /* >= 8300 */ - -/** - * MDS incoming request with LOV EA - * 24 = sizeof(struct lov_ost_data), i.e: replay of opencreate - */ -#define MDS_LOV_MAXREQSIZE max(MDS_MAXREQSIZE, \ - 362 + LOV_MAX_STRIPE_COUNT * 24) -/** - * MDS outgoing reply with LOV EA - * - * NB: max reply size Lustre 2.4+ client can get from old MDS is: - * LOV_MAX_STRIPE_COUNT * (llog_cookie + lov_ost_data) + extra bytes - * - * but 2.4 or later MDS will never send reply with llog_cookie to any - * version client. This macro is defined for server side reply buffer size. - */ -#define MDS_LOV_MAXREPSIZE MDS_LOV_MAXREQSIZE - -/** - * This is the size of a maximum REINT_SETXATTR request: - * - * lustre_msg 56 (32 + 4 x 5 + 4) - * ptlrpc_body 184 - * mdt_rec_setxattr 136 - * lustre_capa 120 - * name 256 (XATTR_NAME_MAX) - * value 65536 (XATTR_SIZE_MAX) - */ -#define MDS_EA_MAXREQSIZE 66288 - -/** - * These are the maximum request and reply sizes (rounded up to 1 KB - * boundaries) for the "regular" MDS_REQUEST_PORTAL and MDS_REPLY_PORTAL. - */ -#define MDS_REG_MAXREQSIZE (((max(MDS_EA_MAXREQSIZE, \ - MDS_LOV_MAXREQSIZE) + 1023) >> 10) << 10) -#define MDS_REG_MAXREPSIZE MDS_REG_MAXREQSIZE - -/** - * The update request includes all of updates from the create, which might - * include linkea (4K maxim), together with other updates, we set it to 9K: - * lustre_msg + ptlrpc_body + UPDATE_BUF_SIZE (8K) - */ -#define MDS_OUT_MAXREQSIZE (9 * 1024) -#define MDS_OUT_MAXREPSIZE MDS_MAXREPSIZE - -/** MDS_BUFSIZE = max_reqsize (w/o LOV EA) + max sptlrpc payload size */ -#define MDS_BUFSIZE max(MDS_MAXREQSIZE + SPTLRPC_MAX_PAYLOAD, \ - 8 * 1024) - -/** - * MDS_REG_BUFSIZE should at least be MDS_REG_MAXREQSIZE + SPTLRPC_MAX_PAYLOAD. - * However, we need to allocate a much larger buffer for it because LNet - * requires each MD(rqbd) has at least MDS_REQ_MAXREQSIZE bytes left to avoid - * dropping of maximum-sized incoming request. So if MDS_REG_BUFSIZE is only a - * little larger than MDS_REG_MAXREQSIZE, then it can only fit in one request - * even there are about MDS_REG_MAX_REQSIZE bytes left in a rqbd, and memory - * utilization is very low. - * - * In the meanwhile, size of rqbd can't be too large, because rqbd can't be - * reused until all requests fit in it have been processed and released, - * which means one long blocked request can prevent the rqbd be reused. - * Now we set request buffer size to 160 KB, so even each rqbd is unlinked - * from LNet with unused 65 KB, buffer utilization will be about 59%. - * Please check LU-2432 for details. - */ -#define MDS_REG_BUFSIZE max(MDS_REG_MAXREQSIZE + SPTLRPC_MAX_PAYLOAD, \ - 160 * 1024) - -/** - * MDS_OUT_BUFSIZE = max_out_reqsize + max sptlrpc payload (~1K) which is - * about 10K, for the same reason as MDS_REG_BUFSIZE, we also give some - * extra bytes to each request buffer to improve buffer utilization rate. - */ -#define MDS_OUT_BUFSIZE max(MDS_OUT_MAXREQSIZE + SPTLRPC_MAX_PAYLOAD, \ - 24 * 1024) - -/** FLD_MAXREQSIZE == lustre_msg + __u32 padding + ptlrpc_body + opc */ -#define FLD_MAXREQSIZE (160) - -/** FLD_MAXREPSIZE == lustre_msg + ptlrpc_body */ -#define FLD_MAXREPSIZE (152) -#define FLD_BUFSIZE (1 << 12) - -/** - * SEQ_MAXREQSIZE == lustre_msg + __u32 padding + ptlrpc_body + opc + lu_range + - * __u32 padding */ -#define SEQ_MAXREQSIZE (160) - -/** SEQ_MAXREPSIZE == lustre_msg + ptlrpc_body + lu_range */ -#define SEQ_MAXREPSIZE (152) -#define SEQ_BUFSIZE (1 << 12) - -/** MGS threads must be >= 3, see bug 22458 comment #28 */ -#define MGS_NTHRS_INIT (PTLRPC_NTHRS_INIT + 1) -#define MGS_NTHRS_MAX 32 - -#define MGS_NBUFS 64 -#define MGS_BUFSIZE (8 * 1024) -#define MGS_MAXREQSIZE (7 * 1024) -#define MGS_MAXREPSIZE (9 * 1024) - - /* - * OSS threads constants: - * - * Given 8 as factor and 64 as base threads number - * - * example 1): - * On 8-core server configured to 2 partitions, we will have - * 64 + 8 * 4 = 96 threads for each partition, 192 total threads. - * - * example 2): - * On 32-core machine configured to 4 partitions, we will have - * 64 + 8 * 8 = 112 threads for each partition, so total threads number - * will be 112 * 4 = 448. - * - * example 3): - * On 64-core machine configured to 4 partitions, we will have - * 64 + 16 * 8 = 192 threads for each partition, so total threads number - * will be 192 * 4 = 768 which is above limit OSS_NTHRS_MAX(512), so we - * cut off the value to OSS_NTHRS_MAX(512) / 4 which is 128 threads - * for each partition. - * - * So we can see that with these constants, threads number wil be at the - * similar level of old versions, unless the server has many cores. - */ - /* depress threads factor for VM with small memory size */ -#define OSS_THR_FACTOR min_t(int, 8, \ - NUM_CACHEPAGES >> (28 - PAGE_CACHE_SHIFT)) -#define OSS_NTHRS_INIT (PTLRPC_NTHRS_INIT + 1) -#define OSS_NTHRS_BASE 64 -#define OSS_NTHRS_MAX 512 - -/* threads for handling "create" request */ -#define OSS_CR_THR_FACTOR 1 -#define OSS_CR_NTHRS_INIT PTLRPC_NTHRS_INIT -#define OSS_CR_NTHRS_BASE 8 -#define OSS_CR_NTHRS_MAX 64 - -/** - * OST_IO_MAXREQSIZE ~= - * lustre_msg + ptlrpc_body + obdo + obd_ioobj + - * DT_MAX_BRW_PAGES * niobuf_remote - * - * - single object with 16 pages is 512 bytes - * - OST_IO_MAXREQSIZE must be at least 1 page of cookies plus some spillover - * - Must be a multiple of 1024 - * - actual size is about 18K - */ -#define _OST_MAXREQSIZE_SUM (sizeof(struct lustre_msg) + \ - sizeof(struct ptlrpc_body) + \ - sizeof(struct obdo) + \ - sizeof(struct obd_ioobj) + \ - sizeof(struct niobuf_remote) * DT_MAX_BRW_PAGES) -/** - * FIEMAP request can be 4K+ for now - */ #define OST_MAXREQSIZE (5 * 1024) -#define OST_IO_MAXREQSIZE max_t(int, OST_MAXREQSIZE, \ - (((_OST_MAXREQSIZE_SUM - 1) | (1024 - 1)) + 1)) - -#define OST_MAXREPSIZE (9 * 1024) -#define OST_IO_MAXREPSIZE OST_MAXREPSIZE - -#define OST_NBUFS 64 -/** OST_BUFSIZE = max_reqsize + max sptlrpc payload size */ -#define OST_BUFSIZE max_t(int, OST_MAXREQSIZE + 1024, 16 * 1024) -/** - * OST_IO_MAXREQSIZE is 18K, giving extra 46K can increase buffer utilization - * rate of request buffer, please check comment of MDS_LOV_BUFSIZE for details. - */ -#define OST_IO_BUFSIZE max_t(int, OST_IO_MAXREQSIZE + 1024, 64 * 1024) /* Macro to hide a typecast. */ #define ptlrpc_req_async_args(req) ((void *)&req->rq_async_args) -- 2.30.2