From 329f0f52fa9fa572b0edbc8dfc34698dbe8efb6a Mon Sep 17 00:00:00 2001 From: Reinhard Meyer Date: Wed, 3 Nov 2010 16:32:56 +0100 Subject: [PATCH] ATMEL: fix related common atmel driver files Signed-off-by: Reinhard Meyer --- drivers/mmc/gen_atmel_mci.c | 2 +- drivers/net/macb.c | 14 ++++++++------ drivers/serial/atmel_usart.c | 28 +++++++--------------------- drivers/spi/atmel_spi.c | 16 ++++++++-------- 4 files changed, 24 insertions(+), 36 deletions(-) diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 6577925b8e..f346b244be 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include "atmel_mci.h" #ifndef CONFIG_SYS_MMC_CLK_OD diff --git a/drivers/net/macb.c b/drivers/net/macb.c index acb8d20b13..72ea1fc11d 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -469,17 +469,19 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) /* choose RMII or MII mode. This depends on the board */ #ifdef CONFIG_RMII -#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ - defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ + defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ + defined(CONFIG_AT91SAM9XE) macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, 0); #endif #else -#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ - defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ + defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ + defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ + defined(CONFIG_AT91SAM9XE) macb_writel(macb, USRIO, MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, MACB_BIT(MII)); diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index bfa1f3a8d5..e326b2bcff 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -23,21 +23,7 @@ #include #include -#include - -#if defined(CONFIG_USART0) -# define USART_ID 0 -# define USART_BASE USART0_BASE -#elif defined(CONFIG_USART1) -# define USART_ID 1 -# define USART_BASE USART1_BASE -#elif defined(CONFIG_USART2) -# define USART_ID 2 -# define USART_BASE USART2_BASE -#elif defined(CONFIG_USART3) -# define USART_ID 3 -# define USART_BASE USART3_BASE -#endif +#include #include "atmel_usart.h" @@ -45,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; void serial_setbrg(void) { - atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE; + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; unsigned long divisor; unsigned long usart_hz; @@ -54,14 +40,14 @@ void serial_setbrg(void) * Baud Rate = -------------- * 16 * CD */ - usart_hz = get_usart_clk_rate(USART_ID); + usart_hz = get_usart_clk_rate(CONFIG_USART_ID); divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate; writel(USART3_BF(CD, divisor), &usart->brgr); } int serial_init(void) { - atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE; + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr); @@ -80,7 +66,7 @@ int serial_init(void) void serial_putc(char c) { - atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE; + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; if (c == '\n') serial_putc('\r'); @@ -97,7 +83,7 @@ void serial_puts(const char *s) int serial_getc(void) { - atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE; + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; while (!(readl(&usart->csr) & USART3_BIT(RXRDY))) WATCHDOG_RESET(); @@ -106,6 +92,6 @@ int serial_getc(void) int serial_tstc(void) { - atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE; + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0; } diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index d0de931968..33e38b61b7 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include "atmel_spi.h" @@ -48,21 +48,21 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, switch (bus) { case 0: - regs = (void *)SPI0_BASE; + regs = (void *)ATMEL_BASE_SPI0; break; -#ifdef SPI1_BASE +#ifdef ATMEL_BASE_SPI1 case 1: - regs = (void *)SPI1_BASE; + regs = (void *)ATMEL_BASE_SPI1; break; #endif -#ifdef SPI2_BASE +#ifdef ATMEL_BASE_SPI2 case 2: - regs = (void *)SPI2_BASE; + regs = (void *)ATMEL_BASE_SPI2; break; #endif -#ifdef SPI3_BASE +#ifdef ATMEL_BASE_SPI3 case 3: - regs = (void *)SPI3_BASE; + regs = (void *)ATMEL_BASE_SPI3; break; #endif default: -- 2.30.2