From 32689e93c4ec39a8c5cc29716c0b2cfe9ee578e5 Mon Sep 17 00:00:00 2001 From: Zhao Yu <574249312@qq.com> Date: Mon, 11 Mar 2019 16:21:58 +0000 Subject: [PATCH] ramips: add support for Youku YK-L2 Hardware spec: CPU: MTK MT7621A RAM: 256MB ROM: 16MB SPI Flash WiFi: MT7603EN + MT7612EN Button: 2 buttons (reset, wps) LED: 8 LEDs (Power 2G 5G WPS Internet LAN1 LAN2 USB) Ethernet: 3 ports, 2 LAN + 1 WAN Other: USB3.0 Flashing instructions: Visit the openwrt forum topic for this router: https://forum.openwrt.org/t/add-openwrt-support-for-youku-yk-l2/34692 to get the bootloader and unlock firmware. 0. upgrade your router with the telnet firmware via the firmware upgrade page on the webui. 1. telnet 192.168.11.1 from your PC 2. Download the pb-boot-youku_l2-20190317-61b6d33.bin and transfer it to the /tmp directory of the router. 3. mtd write /tmp/pb-boot-youku_l2-20190317-61b6d33.bin Bootloader 4. turn off the power 5. Push the reset button while turning on the router and wait until LED start blinking (~10sec.) 6. Connect Ethernet port and goto http://192.168.1.1. 7. Upload the firmware to firmware restore page in webui. Signed-off-by: Zhao Yu <574249312@qq.com> Signed-off-by: Christian Lamparter [rewrote the flashing instructions, fixed author] --- .../ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/dts/YOUKU-YK2.dts | 157 ++++++++++++++++++ target/linux/ramips/image/mt7621.mk | 9 + 3 files changed, 167 insertions(+) create mode 100644 target/linux/ramips/dts/YOUKU-YK2.dts diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 2df9259021..5fcf437fbd 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -130,6 +130,7 @@ ramips_setup_interfaces() mqmaker,witi-512m|\ wndr3700v5|\ youku-yk1|\ + youku,yk-l2|\ zbt-ape522ii|\ zbt-we1326|\ zbtlink,zbt-we3526|\ diff --git a/target/linux/ramips/dts/YOUKU-YK2.dts b/target/linux/ramips/dts/YOUKU-YK2.dts new file mode 100644 index 0000000000..55fdf2f224 --- /dev/null +++ b/target/linux/ramips/dts/YOUKU-YK2.dts @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "youku,yk-l2", "mediatek,mt7621-soc"; + model = "Youku YK-L2"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_wps; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "yk-l2:blue:power"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led_wps: wps { + label = "yk-l2:blue:wps"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "yk-l2:blue:usb"; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&sdhci { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "pci14c3,7603"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + led { + led-active-low; + }; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "pci14c3,7662"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + led { + led-sources = <2>; + led-active-low; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "jtag", "wdt"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index b15dfacaf6..9e42404f64 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -546,6 +546,15 @@ define Device/youhua_wr1200js endef TARGET_DEVICES += youhua_wr1200js +define Device/youku_yk-l2 + DTS := YOUKU-YK2 + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := Youku YK-L2 + DEVICE_PACKAGES := \ + kmod-mt7603 kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic +endef +TARGET_DEVICES += youku_yk-l2 + define Device/wsr-1166 DTS := WSR-1166 IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata -- 2.30.2