From 31c9afdd92380c6a1902325f322d2c4ba52d0ba2 Mon Sep 17 00:00:00 2001 From: Ian Ray Date: Thu, 31 Jan 2019 16:21:17 +0200 Subject: [PATCH] board: ge: ppd: Enable CONFIG_DM_MMC Use MMC device model, and remove USDHC pin configuration code since the pinctrl driver is used. Signed-off-by: Ian Ray --- arch/arm/dts/imx53-ppd.dts | 29 +++++++++++++++ board/ge/mx53ppd/mx53ppd.c | 73 -------------------------------------- configs/mx53ppd_defconfig | 4 +++ include/configs/mx53ppd.h | 6 +--- 4 files changed, 34 insertions(+), 78 deletions(-) diff --git a/arch/arm/dts/imx53-ppd.dts b/arch/arm/dts/imx53-ppd.dts index 98e7dad0ba..f89d6f4672 100644 --- a/arch/arm/dts/imx53-ppd.dts +++ b/arch/arm/dts/imx53-ppd.dts @@ -12,3 +12,32 @@ model = "General Electric CS ONE"; compatible = "ge,imx53-cpuvo", "fsl,imx53"; }; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_esdhc3: esdhc3grp { + fsl,pins = < + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 + MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 + MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 + >; + }; +}; + +/* eMMC */ +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3>; + compatible = "fsl,esdhc"; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c index 23bfe55541..9e13a24755 100644 --- a/board/ge/mx53ppd/mx53ppd.c +++ b/board/ge/mx53ppd/mx53ppd.c @@ -122,79 +122,6 @@ static void setup_iomux_fec(void) imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } -#ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg esdhc_cfg[2] = { - {MMC_SDHC3_BASE_ADDR}, - {MMC_SDHC1_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - return 1; -} - -#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP) -#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ - PAD_CTL_DSE_HIGH) - -int board_mmc_init(bd_t *bis) -{ - static const iomux_v3_cfg_t sd1_pads[] = { - NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD, - SD_CMD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL), - MX53_PAD_EIM_DA11__GPIO3_11, - }; - - static const iomux_v3_cfg_t sd2_pads[] = { - NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), - MX53_PAD_EIM_DA13__GPIO3_13, - }; - - u32 index; - int ret; - - esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - esdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - - for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { - switch (index) { - case 0: - imx_iomux_v3_setup_multiple_pads(sd1_pads, - ARRAY_SIZE(sd1_pads)); - break; - case 1: - imx_iomux_v3_setup_multiple_pads(sd2_pads, - ARRAY_SIZE(sd2_pads)); - break; - default: - printf("Warning: you configured more ESDHC controller (%d) as supported by the board(2)\n", - CONFIG_SYS_FSL_ESDHC_NUM); - return -EINVAL; - } - ret = fsl_esdhc_initialize(bis, &esdhc_cfg[index]); - if (ret) - return ret; - } - - return 0; -} -#endif - #define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 04537c591a..ec3bc10f6d 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -46,3 +46,7 @@ CONFIG_DM=y CONFIG_CMD_DM=y CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="imx53-ppd" +CONFIG_DM_MMC=y +CONFIG_BLK=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX5=y diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index d2a8e6571a..db6cd650f1 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -30,10 +30,6 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 2 - /* Eth Configs */ #define CONFIG_FEC_MXC @@ -101,7 +97,7 @@ "image=/boot/fitImage\0" \ "fdt_high=0xffffffff\0" \ "dev=mmc\0" \ - "devnum=0\0" \ + "devnum=2\0" \ "rootdev=mmcblk0p\0" \ "quiet=quiet loglevel=0\0" \ "console=" CONSOLE_DEV "\0" \ -- 2.30.2