From 303932fd4ff63e8650d5d5da6cc286a8b5f8318d Mon Sep 17 00:00:00 2001 From: Don Brace Date: Thu, 4 Feb 2010 08:42:40 -0600 Subject: [PATCH] [SCSI] hpsa: Allow multiple command completions per interrupt. This is done by adding support for the so-called "performant mode" (that's really what they called it). Smart Array controllers have a mode which enables multiple command completions to be delivered with a single interrupt, "performant" mode. We want to use that mode, as some newer controllers will be requiring this mode. Signed-off-by: Don Brace Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 286 +++++++++++++++++++++++++++++++++------- drivers/scsi/hpsa.h | 106 ++++++++++++++- drivers/scsi/hpsa_cmd.h | 78 ++++++++--- 3 files changed, 404 insertions(+), 66 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 314854b455d2..e518766f9fe0 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -150,6 +150,11 @@ static int check_for_unit_attention(struct ctlr_info *h, struct CommandList *c); static void check_ioctl_unit_attention(struct ctlr_info *h, struct CommandList *c); +/* performant mode helper functions */ +static void calc_bucket_map(int *bucket, int num_buckets, + int nsgs, int *bucket_map); +static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h); +static inline u32 next_command(struct ctlr_info *h); static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL); static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL); @@ -173,10 +178,8 @@ static struct scsi_host_template hpsa_driver_template = { .name = "hpsa", .proc_name = "hpsa", .queuecommand = hpsa_scsi_queue_command, - .can_queue = 512, .this_id = -1, .sg_tablesize = MAXSGENTRIES, - .cmd_per_lun = 512, .use_clustering = ENABLE_CLUSTERING, .eh_device_reset_handler = hpsa_eh_device_reset_handler, .ioctl = hpsa_ioctl, @@ -394,10 +397,44 @@ static inline void addQ(struct hlist_head *list, struct CommandList *c) hlist_add_head(&c->list, list); } +static inline u32 next_command(struct ctlr_info *h) +{ + u32 a; + + if (unlikely(h->transMethod != CFGTBL_Trans_Performant)) + return h->access.command_completed(h); + + if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { + a = *(h->reply_pool_head); /* Next cmd in ring buffer */ + (h->reply_pool_head)++; + h->commands_outstanding--; + } else { + a = FIFO_EMPTY; + } + /* Check for wraparound */ + if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { + h->reply_pool_head = h->reply_pool; + h->reply_pool_wraparound ^= 1; + } + return a; +} + +/* set_performant_mode: Modify the tag for cciss performant + * set bit 0 for pull model, bits 3-1 for block fetch + * register number + */ +static void set_performant_mode(struct ctlr_info *h, struct CommandList *c) +{ + if (likely(h->transMethod == CFGTBL_Trans_Performant)) + c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1); +} + static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c) { unsigned long flags; + + set_performant_mode(h, c); spin_lock_irqsave(&h->lock, flags); addQ(&h->reqQ, c); h->Qdepth++; @@ -1116,9 +1153,11 @@ static int hpsa_scsi_detect(struct ctlr_info *h) sh->max_cmd_len = MAX_COMMAND_SIZE; sh->max_lun = HPSA_MAX_LUN; sh->max_id = HPSA_MAX_LUN; + sh->can_queue = h->nr_cmds; + sh->cmd_per_lun = h->nr_cmds; h->scsi_host = sh; sh->hostdata[0] = (unsigned long) h; - sh->irq = h->intr[SIMPLE_MODE_INT]; + sh->irq = h->intr[PERF_MODE_INT]; sh->unique_id = sh->irq; error = scsi_add_host(sh, &h->pdev->dev); if (error) @@ -1843,7 +1882,8 @@ static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd, c->scsi_cmd = cmd; c->Header.ReplyQueue = 0; /* unused in simple mode */ memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8); - c->Header.Tag.lower = c->busaddr; /* Use k. address of cmd as tag */ + c->Header.Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT); + c->Header.Tag.lower |= DIRECT_LOOKUP_BIT; /* Fill in the request block... */ @@ -2700,8 +2740,9 @@ static inline bool interrupt_pending(struct ctlr_info *h) static inline long interrupt_not_for_us(struct ctlr_info *h) { - return ((h->access.intr_pending(h) == 0) || - (h->interrupts_enabled == 0)); + return !(h->msi_vector || h->msix_vector) && + ((h->access.intr_pending(h) == 0) || + (h->interrupts_enabled == 0)); } static inline int bad_tag(struct ctlr_info *h, u32 tag_index, @@ -2725,13 +2766,13 @@ static inline void finish_cmd(struct CommandList *c, u32 raw_tag) static inline u32 hpsa_tag_contains_index(u32 tag) { -#define DIRECT_LOOKUP_BIT 0x04 +#define DIRECT_LOOKUP_BIT 0x10 return tag & DIRECT_LOOKUP_BIT; } static inline u32 hpsa_tag_to_index(u32 tag) { -#define DIRECT_LOOKUP_SHIFT 3 +#define DIRECT_LOOKUP_SHIFT 5 return tag >> DIRECT_LOOKUP_SHIFT; } @@ -2741,42 +2782,61 @@ static inline u32 hpsa_tag_discard_error_bits(u32 tag) return tag & ~HPSA_ERROR_BITS; } +/* process completion of an indexed ("direct lookup") command */ +static inline u32 process_indexed_cmd(struct ctlr_info *h, + u32 raw_tag) +{ + u32 tag_index; + struct CommandList *c; + + tag_index = hpsa_tag_to_index(raw_tag); + if (bad_tag(h, tag_index, raw_tag)) + return next_command(h); + c = h->cmd_pool + tag_index; + finish_cmd(c, raw_tag); + return next_command(h); +} + +/* process completion of a non-indexed command */ +static inline u32 process_nonindexed_cmd(struct ctlr_info *h, + u32 raw_tag) +{ + u32 tag; + struct CommandList *c = NULL; + struct hlist_node *tmp; + + tag = hpsa_tag_discard_error_bits(raw_tag); + hlist_for_each_entry(c, tmp, &h->cmpQ, list) { + if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) { + finish_cmd(c, raw_tag); + return next_command(h); + } + } + bad_tag(h, h->nr_cmds + 1, raw_tag); + return next_command(h); +} + static irqreturn_t do_hpsa_intr(int irq, void *dev_id) { struct ctlr_info *h = dev_id; - struct CommandList *c; unsigned long flags; - u32 raw_tag, tag, tag_index; - struct hlist_node *tmp; + u32 raw_tag; if (interrupt_not_for_us(h)) return IRQ_NONE; spin_lock_irqsave(&h->lock, flags); - while (interrupt_pending(h)) { - while ((raw_tag = get_next_completion(h)) != FIFO_EMPTY) { - if (likely(hpsa_tag_contains_index(raw_tag))) { - tag_index = hpsa_tag_to_index(raw_tag); - if (bad_tag(h, tag_index, raw_tag)) - return IRQ_HANDLED; - c = h->cmd_pool + tag_index; - finish_cmd(c, raw_tag); - continue; - } - tag = hpsa_tag_discard_error_bits(raw_tag); - c = NULL; - hlist_for_each_entry(c, tmp, &h->cmpQ, list) { - if (c->busaddr == tag) { - finish_cmd(c, raw_tag); - break; - } - } - } + raw_tag = get_next_completion(h); + while (raw_tag != FIFO_EMPTY) { + if (hpsa_tag_contains_index(raw_tag)) + raw_tag = process_indexed_cmd(h, raw_tag); + else + raw_tag = process_nonindexed_cmd(h, raw_tag); } spin_unlock_irqrestore(&h->lock, flags); return IRQ_HANDLED; } -/* Send a message CDB to the firmware. */ +/* Send a message CDB to the firmwart. */ static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type) { @@ -3108,7 +3168,7 @@ static void __devinit hpsa_interrupt_mode(struct ctlr_info *h, default_int_mode: #endif /* CONFIG_PCI_MSI */ /* if we get here we're going to use the default interrupt mode */ - h->intr[SIMPLE_MODE_INT] = pdev->irq; + h->intr[PERF_MODE_INT] = pdev->irq; } static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev) @@ -3118,6 +3178,7 @@ static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev) u64 cfg_offset; u32 cfg_base_addr; u64 cfg_base_addr_index; + u32 trans_offset; int i, prod_index, err; subsystem_vendor_id = pdev->subsystem_vendor; @@ -3211,11 +3272,14 @@ static int hpsa_pci_init(struct ctlr_info *h, struct pci_dev *pdev) h->cfgtable = remap_pci_mem(pci_resource_start(pdev, cfg_base_addr_index) + cfg_offset, sizeof(h->cfgtable)); - h->board_id = board_id; - - /* Query controller for max supported commands: */ - h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + /* Find performant mode table. */ + trans_offset = readl(&(h->cfgtable->TransMethodOffset)); + h->transtable = remap_pci_mem(pci_resource_start(pdev, + cfg_base_addr_index)+cfg_offset+trans_offset, + sizeof(*h->transtable)); + h->board_id = board_id; + h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands)); h->product_name = products[prod_index].product_name; h->access = *(products[prod_index].access); /* Allow room for some ioctls */ @@ -3314,7 +3378,12 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev, } } - BUILD_BUG_ON(sizeof(struct CommandList) % 8); + /* Command structures must be aligned on a 32-byte boundary because + * the 5 lower bits of the address are used by the hardware. and by + * the driver. See comments in hpsa.h for more info. + */ +#define COMMANDLIST_ALIGNMENT 32 + BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT); h = kzalloc(sizeof(*h), GFP_KERNEL); if (!h) return -ENOMEM; @@ -3349,17 +3418,17 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev, /* make sure the board interrupts are off */ h->access.set_intr_mask(h, HPSA_INTR_OFF); - rc = request_irq(h->intr[SIMPLE_MODE_INT], do_hpsa_intr, - IRQF_DISABLED | IRQF_SHARED, h->devname, h); + rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr, + IRQF_DISABLED, h->devname, h); if (rc) { dev_err(&pdev->dev, "unable to get irq %d for %s\n", - h->intr[SIMPLE_MODE_INT], h->devname); + h->intr[PERF_MODE_INT], h->devname); goto clean2; } - dev_info(&pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n", - h->devname, pdev->device, pci_name(pdev), - h->intr[SIMPLE_MODE_INT], dac ? "" : " not"); + dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n", + h->devname, pdev->device, + h->intr[PERF_MODE_INT], dac ? "" : " not"); h->cmd_pool_bits = kmalloc(((h->nr_cmds + BITS_PER_LONG - @@ -3389,6 +3458,7 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev, /* Turn the interrupts on so we can service requests */ h->access.set_intr_mask(h, HPSA_INTR_ON); + hpsa_put_ctlr_into_performant_mode(h); hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ h->busy_initializing = 0; return 1; @@ -3404,7 +3474,7 @@ clean4: h->nr_cmds * sizeof(struct ErrorInfo), h->errinfo_pool, h->errinfo_pool_dhandle); - free_irq(h->intr[SIMPLE_MODE_INT], h); + free_irq(h->intr[PERF_MODE_INT], h); clean2: clean1: h->busy_initializing = 0; @@ -3448,7 +3518,7 @@ static void hpsa_shutdown(struct pci_dev *pdev) */ hpsa_flush_cache(h); h->access.set_intr_mask(h, HPSA_INTR_OFF); - free_irq(h->intr[2], h); + free_irq(h->intr[PERF_MODE_INT], h); #ifdef CONFIG_PCI_MSI if (h->msix_vector) pci_disable_msix(h->pdev); @@ -3477,7 +3547,10 @@ static void __devexit hpsa_remove_one(struct pci_dev *pdev) pci_free_consistent(h->pdev, h->nr_cmds * sizeof(struct ErrorInfo), h->errinfo_pool, h->errinfo_pool_dhandle); + pci_free_consistent(h->pdev, h->reply_pool_size, + h->reply_pool, h->reply_pool_dhandle); kfree(h->cmd_pool_bits); + kfree(h->blockFetchTable); /* * Deliberately omit pci_disable_device(): it does something nasty to * Smart Array controllers that pci_enable_device does not undo @@ -3509,6 +3582,129 @@ static struct pci_driver hpsa_pci_driver = { .resume = hpsa_resume, }; +/* Fill in bucket_map[], given nsgs (the max number of + * scatter gather elements supported) and bucket[], + * which is an array of 8 integers. The bucket[] array + * contains 8 different DMA transfer sizes (in 16 + * byte increments) which the controller uses to fetch + * commands. This function fills in bucket_map[], which + * maps a given number of scatter gather elements to one of + * the 8 DMA transfer sizes. The point of it is to allow the + * controller to only do as much DMA as needed to fetch the + * command, with the DMA transfer size encoded in the lower + * bits of the command address. + */ +static void calc_bucket_map(int bucket[], int num_buckets, + int nsgs, int *bucket_map) +{ + int i, j, b, size; + + /* even a command with 0 SGs requires 4 blocks */ +#define MINIMUM_TRANSFER_BLOCKS 4 +#define NUM_BUCKETS 8 + /* Note, bucket_map must have nsgs+1 entries. */ + for (i = 0; i <= nsgs; i++) { + /* Compute size of a command with i SG entries */ + size = i + MINIMUM_TRANSFER_BLOCKS; + b = num_buckets; /* Assume the biggest bucket */ + /* Find the bucket that is just big enough */ + for (j = 0; j < 8; j++) { + if (bucket[j] >= size) { + b = j; + break; + } + } + /* for a command with i SG entries, use bucket b. */ + bucket_map[i] = b; + } +} + +static void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) +{ + u32 trans_support; + u64 trans_offset; + /* 5 = 1 s/g entry or 4k + * 6 = 2 s/g entry or 8k + * 8 = 4 s/g entry or 16k + * 10 = 6 s/g entry or 24k + */ + int bft[8] = {5, 6, 8, 10, 12, 20, 28, 35}; /* for scatter/gathers */ + int i = 0; + int l = 0; + unsigned long register_value; + + trans_support = readl(&(h->cfgtable->TransportSupport)); + if (!(trans_support & PERFORMANT_MODE)) + return; + + h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands)); + h->max_sg_entries = 32; + /* Performant mode ring buffer and supporting data structures */ + h->reply_pool_size = h->max_commands * sizeof(u64); + h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size, + &(h->reply_pool_dhandle)); + + /* Need a block fetch table for performant mode */ + h->blockFetchTable = kmalloc(((h->max_sg_entries+1) * + sizeof(u32)), GFP_KERNEL); + + if ((h->reply_pool == NULL) + || (h->blockFetchTable == NULL)) + goto clean_up; + + h->reply_pool_wraparound = 1; /* spec: init to 1 */ + + /* Controller spec: zero out this buffer. */ + memset(h->reply_pool, 0, h->reply_pool_size); + h->reply_pool_head = h->reply_pool; + + trans_offset = readl(&(h->cfgtable->TransMethodOffset)); + bft[7] = h->max_sg_entries + 4; + calc_bucket_map(bft, ARRAY_SIZE(bft), 32, h->blockFetchTable); + for (i = 0; i < 8; i++) + writel(bft[i], &h->transtable->BlockFetch[i]); + + /* size of controller ring buffer */ + writel(h->max_commands, &h->transtable->RepQSize); + writel(1, &h->transtable->RepQCount); + writel(0, &h->transtable->RepQCtrAddrLow32); + writel(0, &h->transtable->RepQCtrAddrHigh32); + writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32); + writel(0, &h->transtable->RepQAddr0High32); + writel(CFGTBL_Trans_Performant, + &(h->cfgtable->HostWrite.TransportRequest)); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + /* under certain very rare conditions, this can take awhile. + * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right + * as we enter this code.) */ + for (l = 0; l < MAX_CONFIG_WAIT; l++) { + register_value = readl(h->vaddr + SA5_DOORBELL); + if (!(register_value & CFGTBL_ChangeReq)) + break; + /* delay and try again */ + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(10); + } + register_value = readl(&(h->cfgtable->TransportActive)); + if (!(register_value & CFGTBL_Trans_Performant)) { + dev_warn(&h->pdev->dev, "unable to get board into" + " performant mode\n"); + return; + } + + /* Change the access methods to the performant access methods */ + h->access = SA5_performant_access; + h->transMethod = CFGTBL_Trans_Performant; + + return; + +clean_up: + if (h->reply_pool) + pci_free_consistent(h->pdev, h->reply_pool_size, + h->reply_pool, h->reply_pool_dhandle); + kfree(h->blockFetchTable); +} + /* * This is it. Register the PCI driver information for the cards we control * the OS will call our registered routines when it finds one of our cards. diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 0eab386a03be..0ba1aa3f4d4d 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -60,14 +60,15 @@ struct ctlr_info { unsigned long paddr; int nr_cmds; /* Number of commands allowed on this controller */ struct CfgTable __iomem *cfgtable; + int max_sg_entries; int interrupts_enabled; int major; int max_commands; int commands_outstanding; int max_outstanding; /* Debug */ int usage_count; /* number of opens all all minor devices */ -# define DOORBELL_INT 0 -# define PERF_MODE_INT 1 +# define PERF_MODE_INT 0 +# define DOORBELL_INT 1 # define SIMPLE_MODE_INT 2 # define MEMQ_MODE_INT 3 unsigned int intr[4]; @@ -102,6 +103,23 @@ struct ctlr_info { int ndevices; /* number of used elements in .dev[] array. */ #define HPSA_MAX_SCSI_DEVS_PER_HBA 256 struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA]; + /* + * Performant mode tables. + */ + u32 trans_support; + u32 trans_offset; + struct TransTable_struct *transtable; + unsigned long transMethod; + + /* + * Performant mode completion buffer + */ + u64 *reply_pool; + dma_addr_t reply_pool_dhandle; + u64 *reply_pool_head; + size_t reply_pool_size; + unsigned char reply_pool_wraparound; + u32 *blockFetchTable; }; #define HPSA_ABORT_MSG 0 #define HPSA_DEVICE_RESET_MSG 1 @@ -165,6 +183,16 @@ struct ctlr_info { #define HPSA_ERROR_BIT 0x02 +/* Performant mode flags */ +#define SA5_PERF_INTR_PENDING 0x04 +#define SA5_PERF_INTR_OFF 0x05 +#define SA5_OUTDB_STATUS_PERF_BIT 0x01 +#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 +#define SA5_OUTDB_CLEAR 0xA0 +#define SA5_OUTDB_CLEAR_PERF_BIT 0x01 +#define SA5_OUTDB_STATUS 0x9C + + #define HPSA_INTR_ON 1 #define HPSA_INTR_OFF 0 /* @@ -173,7 +201,8 @@ struct ctlr_info { static void SA5_submit_command(struct ctlr_info *h, struct CommandList *c) { - dev_dbg(&h->pdev->dev, "Sending %x\n", c->busaddr); + dev_dbg(&h->pdev->dev, "Sending %x, tag = %x\n", c->busaddr, + c->Header.Tag.lower); writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); h->commands_outstanding++; if (h->commands_outstanding > h->max_outstanding) @@ -196,6 +225,52 @@ static void SA5_intr_mask(struct ctlr_info *h, unsigned long val) h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); } } + +static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val) +{ + if (val) { /* turn on interrupts */ + h->interrupts_enabled = 1; + writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } else { + h->interrupts_enabled = 0; + writel(SA5_PERF_INTR_OFF, + h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); + } +} + +static unsigned long SA5_performant_completed(struct ctlr_info *h) +{ + unsigned long register_value = FIFO_EMPTY; + + /* flush the controller write of the reply queue by reading + * outbound doorbell status register. + */ + register_value = readl(h->vaddr + SA5_OUTDB_STATUS); + /* msi auto clears the interrupt pending bit. */ + if (!(h->msi_vector || h->msix_vector)) { + writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR); + /* Do a read in order to flush the write to the controller + * (as per spec.) + */ + register_value = readl(h->vaddr + SA5_OUTDB_STATUS); + } + + if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) { + register_value = *(h->reply_pool_head); + (h->reply_pool_head)++; + h->commands_outstanding--; + } else { + register_value = FIFO_EMPTY; + } + /* Check for wraparound */ + if (h->reply_pool_head == (h->reply_pool + h->max_commands)) { + h->reply_pool_head = h->reply_pool; + h->reply_pool_wraparound ^= 1; + } + + return register_value; +} + /* * Returns true if fifo is full. * @@ -241,6 +316,20 @@ static bool SA5_intr_pending(struct ctlr_info *h) return register_value & SA5_INTR_PENDING; } +static bool SA5_performant_intr_pending(struct ctlr_info *h) +{ + unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS); + + if (!register_value) + return false; + + if (h->msi_vector || h->msix_vector) + return true; + + /* Read outbound doorbell to flush */ + register_value = readl(h->vaddr + SA5_OUTDB_STATUS); + return register_value & SA5_OUTDB_STATUS_PERF_BIT; +} static struct access_method SA5_access = { SA5_submit_command, @@ -250,14 +339,19 @@ static struct access_method SA5_access = { SA5_completed, }; +static struct access_method SA5_performant_access = { + SA5_submit_command, + SA5_performant_intr_mask, + SA5_fifo_full, + SA5_performant_intr_pending, + SA5_performant_completed, +}; + struct board_type { u32 board_id; char *product_name; struct access_method *access; }; - -/* end of old hpsa_scsi.h file */ - #endif /* HPSA_H */ diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 88bb3b0a21d3..3e0abdf76689 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -101,6 +101,7 @@ #define CFGTBL_AccCmds 0x00000001l #define CFGTBL_Trans_Simple 0x00000002l +#define CFGTBL_Trans_Performant 0x00000004l #define CFGTBL_BusType_Ultra2 0x00000001l #define CFGTBL_BusType_Ultra3 0x00000002l @@ -267,12 +268,31 @@ struct ErrorInfo { #define CMD_IOCTL_PEND 0x01 #define CMD_SCSI 0x03 +/* This structure needs to be divisible by 32 for new + * indexing method and performant mode. + */ +#define PAD32 32 +#define PAD64DIFF 0 +#define USEEXTRA ((sizeof(void *) - 4)/4) +#define PADSIZE (PAD32 + PAD64DIFF * USEEXTRA) + +#define DIRECT_LOOKUP_SHIFT 5 +#define DIRECT_LOOKUP_BIT 0x10 + +#define HPSA_ERROR_BIT 0x02 struct ctlr_info; /* defined in hpsa.h */ -/* The size of this structure needs to be divisible by 8 - * on all architectures, because the controller uses 2 - * lower bits of the address, and the driver uses 1 lower - * bit (3 bits total.) +/* The size of this structure needs to be divisible by 32 + * on all architectures because low 5 bits of the addresses + * are used as follows: + * + * bit 0: to device, used to indicate "performant mode" command + * from device, indidcates error status. + * bit 1-3: to device, indicates block fetch table entry for + * reducing DMA in fetching commands from host memory. + * bit 4: used to indicate whether tag is "direct lookup" (index), + * or a bus address. */ + struct CommandList { struct CommandListHeader Header; struct RequestBlock Request; @@ -291,6 +311,14 @@ struct CommandList { struct completion *waiting; int retry_count; void *scsi_cmd; + +/* on 64 bit architectures, to get this to be 32-byte-aligned + * it so happens we need no padding, on 32 bit systems, + * we need 8 bytes of padding. This does that. + */ +#define COMMANDLIST_PAD ((8 - sizeof(long))/4 * 8) + u8 pad[COMMANDLIST_PAD]; + }; /* Configuration Table Structure */ @@ -301,18 +329,38 @@ struct HostWrite { u32 CoalIntCount; }; +#define SIMPLE_MODE 0x02 +#define PERFORMANT_MODE 0x04 +#define MEMQ_MODE 0x08 + struct CfgTable { - u8 Signature[4]; - u32 SpecValence; - u32 TransportSupport; - u32 TransportActive; - struct HostWrite HostWrite; - u32 CmdsOutMax; - u32 BusTypes; - u32 Reserved; - u8 ServerName[16]; - u32 HeartBeat; - u32 SCSI_Prefetch; + u8 Signature[4]; + u32 SpecValence; + u32 TransportSupport; + u32 TransportActive; + struct HostWrite HostWrite; + u32 CmdsOutMax; + u32 BusTypes; + u32 TransMethodOffset; + u8 ServerName[16]; + u32 HeartBeat; + u32 SCSI_Prefetch; + u32 MaxScatterGatherElements; + u32 MaxLogicalUnits; + u32 MaxPhysicalDevices; + u32 MaxPhysicalDrivesPerLogicalUnit; + u32 MaxPerformantModeCommands; +}; + +#define NUM_BLOCKFETCH_ENTRIES 8 +struct TransTable_struct { + u32 BlockFetch[NUM_BLOCKFETCH_ENTRIES]; + u32 RepQSize; + u32 RepQCount; + u32 RepQCtrAddrLow32; + u32 RepQCtrAddrHigh32; + u32 RepQAddr0Low32; + u32 RepQAddr0High32; }; struct hpsa_pci_info { -- 2.30.2