From 2f7de7271ff5d544a3609dc72438d6f70665596f Mon Sep 17 00:00:00 2001 From: Jorge Ramirez-Ortiz Date: Sun, 23 Sep 2018 09:39:48 +0200 Subject: [PATCH] rcar_gen3: drivers: dma Signed-off-by: ldts --- drivers/renesas/rcar/dma/dma_driver.c | 147 ++++++++++++++++++++++++++ 1 file changed, 147 insertions(+) create mode 100644 drivers/renesas/rcar/dma/dma_driver.c diff --git a/drivers/renesas/rcar/dma/dma_driver.c b/drivers/renesas/rcar/dma/dma_driver.c new file mode 100644 index 00000000..d4fa65d2 --- /dev/null +++ b/drivers/renesas/rcar/dma/dma_driver.c @@ -0,0 +1,147 @@ +/* + * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include +#include +#include +#include +#include "rcar_def.h" +#include "cpg_registers.h" +#include "debug.h" +#include "rcar_private.h" + +/* DMA CHANNEL setting (0/16/32) */ +#define DMA_CH 0 + +#if (DMA_CH == 0) +#define SYS_DMAC_BIT ((uint32_t)1U << 19U) +#define DMA_BASE (0xE6700000U) +#elif (DMA_CH == 16) +#define SYS_DMAC_BIT ((uint32_t)1U << 18U) +#define DMA_BASE (0xE7300000U) +#elif (DMA_CH == 32) +#define SYS_DMAC_BIT ((uint32_t)1U << 17U) +#define DMA_BASE (0xE7320000U) +#else +#define SYS_DMAC_BIT ((uint32_t)1U << 19U) +#define DMA_BASE (0xE6700000U) +#endif + +/* DMA operation */ +#define DMA_DMAOR (DMA_BASE + 0x0060U) +/* DMA secure control */ +#define DMA_DMASEC (DMA_BASE + 0x0030U) +/* DMA channel clear */ +#define DMA_DMACHCLR (DMA_BASE + 0x0080U) +/* DMA source address */ +#define DMA_DMASAR (DMA_BASE + 0x8000U) +/* DMA destination address */ +#define DMA_DMADAR (DMA_BASE + 0x8004U) +/* DMA transfer count */ +#define DMA_DMATCR (DMA_BASE + 0x8008U) +/* DMA channel control */ +#define DMA_DMACHCR (DMA_BASE + 0x800CU) +/* DMA fixed destination address */ +#define DMA_DMAFIXDAR (DMA_BASE + 0x8014U) + +#define DMA_USE_CHANNEL (0x00000001U) +#define DMAOR_INITIAL (0x0301U) +#define DMACHCLR_CH_ALL (0x0000FFFFU) +#define DMAFIXDAR_32BIT_SHIFT (32U) +#define DMAFIXDAR_DAR_MASK (0x000000FFU) +#define DMADAR_BOUNDARY_ADDR (0x100000000ULL) +#define DMATCR_CNT_SHIFT (6U) +#define DMATCR_MAX (0x00FFFFFFU) +#define DMACHCR_TRN_MODE (0x00105409U) +#define DMACHCR_DE_BIT (0x00000001U) +#define DMACHCR_TE_BIT (0x00000002U) +#define DMACHCR_CHE_BIT (0x80000000U) + +#define DMA_SIZE_UNIT FLASH_TRANS_SIZE_UNIT +#define DMA_FRACTION_MASK (0xFFU) +#define DMA_DST_LIMIT (0x10000000000ULL) + +/* transfer length limit */ +#define DMA_LENGTH_LIMIT ((DMATCR_MAX * (1U << DMATCR_CNT_SHIFT)) \ + & ~DMA_FRACTION_MASK) + +static void dma_enable(void) +{ + mstpcr_write(CPG_SMSTPCR2, CPG_MSTPSR2, SYS_DMAC_BIT); +} + +static void dma_setup(void) +{ + mmio_write_16(DMA_DMAOR, 0); + mmio_write_32(DMA_DMACHCLR, DMACHCLR_CH_ALL); +} + +static void dma_start(uintptr_t dst, uint32_t src, uint32_t len) +{ + mmio_write_16(DMA_DMAOR, DMAOR_INITIAL); + mmio_write_32(DMA_DMAFIXDAR, (dst >> DMAFIXDAR_32BIT_SHIFT) & + DMAFIXDAR_DAR_MASK); + mmio_write_32(DMA_DMADAR, dst & UINT32_MAX); + mmio_write_32(DMA_DMASAR, src); + mmio_write_32(DMA_DMATCR, len >> DMATCR_CNT_SHIFT); + mmio_write_32(DMA_DMASEC, DMA_USE_CHANNEL); + mmio_write_32(DMA_DMACHCR, DMACHCR_TRN_MODE); +} + +static void dma_end(void) +{ + while ((mmio_read_32(DMA_DMACHCR) & DMACHCR_TE_BIT) == 0) { + if ((mmio_read_32(DMA_DMACHCR) & DMACHCR_CHE_BIT) != 0U) { + ERROR("BL2: DMA - Channel Address Error\n"); + panic(); + break; + } + } + /* DMA transfer Disable */ + mmio_clrbits_32(DMA_DMACHCR, DMACHCR_DE_BIT); + while ((mmio_read_32(DMA_DMACHCR) & DMACHCR_DE_BIT) != 0) + ; + + mmio_write_32(DMA_DMASEC, 0); + mmio_write_16(DMA_DMAOR, 0); + mmio_write_32(DMA_DMACHCLR, DMA_USE_CHANNEL); +} + +void rcar_dma_exec(uintptr_t dst, uint32_t src, uint32_t len) +{ + uint32_t dma_len = len; + + if (len & DMA_FRACTION_MASK) + dma_len = (len + DMA_SIZE_UNIT) & ~DMA_FRACTION_MASK; + + if (!dma_len || dma_len > DMA_LENGTH_LIMIT) { + ERROR("BL2: DMA - size invalid, length (0x%x)\n", dma_len); + panic(); + } + + if (src & DMA_FRACTION_MASK) { + ERROR("BL2: DMA - source address invalid (0x%x), " + "length (0x%x)\n", src, dma_len); + panic(); + } + + if ((dst & UINT32_MAX) + dma_len > DMADAR_BOUNDARY_ADDR || + (dst + dma_len > DMA_DST_LIMIT) || + (dst & DMA_FRACTION_MASK)) { + ERROR("BL2: DMA - destination address invalid (0x%lx), " + "length (0x%x)\n", dst, dma_len); + panic(); + } + + dma_start(dst, src, dma_len); + dma_end(); +} + +void rcar_dma_init(void) +{ + dma_enable(); + dma_setup(); +} -- 2.30.2