From 2f1ff5b4ceb420761154afb1b2e0704c5f057720 Mon Sep 17 00:00:00 2001 From: Shiji Yang Date: Fri, 28 Jun 2024 15:36:13 +0800 Subject: [PATCH] ramips: mt7621: fix GPIO switch pin number The numberspace base has been changed since 6.6 kernel: chip_num chip0 chip1 chip2 (32 gpios per bank) old base 480 448 416 new base 512 544 576 Signed-off-by: Shiji Yang --- .../base-files/etc/board.d/03_gpio_switches | 20 +++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches index 22cf272429..b8f2922f48 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches @@ -7,10 +7,10 @@ board=$(board_name) case "$board" in mikrotik,routerboard-760igs) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "497" + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "529" ;; telco-electronics,x1) - ucidef_add_gpio_switch "modem_reset" "Modem Reset" "496" + ucidef_add_gpio_switch "modem_reset" "Modem Reset" "528" ;; tozed,zlt-s12-pro) ucidef_add_gpio_switch "lt72_power" "Power LTE modem" "lt72_power" "1" @@ -20,14 +20,14 @@ tplink,eap615-wall-v1) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "poe-passthrough" ;; ubnt,edgerouter-x) - ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "480" + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "512" ;; ubnt,edgerouter-x-sfp) - ucidef_add_gpio_switch "poe_power_port0" "PoE Power Port0" "400" - ucidef_add_gpio_switch "poe_power_port1" "PoE Power Port1" "401" - ucidef_add_gpio_switch "poe_power_port2" "PoE Power Port2" "402" - ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "403" - ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "404" + ucidef_add_gpio_switch "poe_power_port0" "PoE Power Port0" "608" + ucidef_add_gpio_switch "poe_power_port1" "PoE Power Port1" "609" + ucidef_add_gpio_switch "poe_power_port2" "PoE Power Port2" "610" + ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "611" + ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "612" ;; zyxel,lte3301-plus|\ zyxel,lte5398-m904) @@ -35,10 +35,10 @@ zyxel,lte5398-m904) ucidef_add_gpio_switch "lte_power" "Power LTE modem" "lte_power" "1" ;; zyxel,nr7101) - ucidef_add_gpio_switch "lte_reset" "Reset LTE/5G modem" "483" + ucidef_add_gpio_switch "lte_reset" "Reset LTE/5G modem" "515" ;; zyxel,wap6805) - ucidef_add_gpio_switch "qtn_power" "Quantenna Module Power" "496" "1" + ucidef_add_gpio_switch "qtn_power" "Quantenna Module Power" "528" "1" ;; esac -- 2.30.2