From 2dd49e0f16fb0e07c6fcc1322ebba310f5827072 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Mon, 7 Sep 2015 11:57:44 +0800 Subject: [PATCH] r8152: fix the runtime suspend issues Fix the runtime suspend issues result from the linking change. Case 1: a) link down occurs. b) driver disable tx/rx. c) autosuspend occurs. d) hw linking up. e) device suspends without enabling tx/rx. f) couldn't wake up when receiving packets. Case 2: a) Nway results in linking down. b) autosuspend occurs. c) device suspends. d) device may not wake up when linking up. Signed-off-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 59 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 57 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 6bb48bc51484..d9427ca3dba7 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -30,7 +30,7 @@ #define NETNEXT_VERSION "08" /* Information for net */ -#define NET_VERSION "1" +#define NET_VERSION "2" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers " @@ -148,6 +148,7 @@ #define OCP_EEE_ABLE 0xa5c4 #define OCP_EEE_ADV 0xa5d0 #define OCP_EEE_LPABLE 0xa5d2 +#define OCP_PHY_STATE 0xa708 /* nway state for 8153 */ #define OCP_ADC_CFG 0xbc06 /* SRAM Register */ @@ -432,6 +433,10 @@ /* OCP_DOWN_SPEED */ #define EN_10M_BGOFF 0x0080 +/* OCP_PHY_STATE */ +#define TXDIS_STATE 0x01 +#define ABD_STATE 0x02 + /* OCP_ADC_CFG */ #define CKADSEL_L 0x0100 #define ADC_EN 0x0080 @@ -609,6 +614,7 @@ struct r8152 { void (*unload)(struct r8152 *); int (*eee_get)(struct r8152 *, struct ethtool_eee *); int (*eee_set)(struct r8152 *, struct ethtool_eee *); + bool (*in_nway)(struct r8152 *); } rtl_ops; int intr_interval; @@ -2946,6 +2952,32 @@ static void rtl8153_down(struct r8152 *tp) r8153_enable_aldps(tp); } +static bool rtl8152_in_nway(struct r8152 *tp) +{ + u16 nway_state; + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, 0x2000); + tp->ocp_base = 0x2000; + ocp_write_byte(tp, MCU_TYPE_PLA, 0xb014, 0x4c); /* phy state */ + nway_state = ocp_read_word(tp, MCU_TYPE_PLA, 0xb01a); + + /* bit 15: TXDIS_STATE, bit 14: ABD_STATE */ + if (nway_state & 0xc000) + return false; + else + return true; +} + +static bool rtl8153_in_nway(struct r8152 *tp) +{ + u16 phy_state = ocp_reg_read(tp, OCP_PHY_STATE) & 0xff; + + if (phy_state == TXDIS_STATE || phy_state == ABD_STATE) + return false; + else + return true; +} + static void set_carrier(struct r8152 *tp) { struct net_device *netdev = tp->netdev; @@ -3410,6 +3442,27 @@ static int rtl8152_post_reset(struct usb_interface *intf) return 0; } +static bool delay_autosuspend(struct r8152 *tp) +{ + bool sw_linking = !!netif_carrier_ok(tp->netdev); + bool hw_linking = !!(rtl8152_get_speed(tp) & LINK_STATUS); + + /* This means a linking change occurs and the driver doesn't detect it, + * yet. If the driver has disabled tx/rx and hw is linking on, the + * device wouldn't wake up by receiving any packet. + */ + if (work_busy(&tp->schedule.work) || sw_linking != hw_linking) + return true; + + /* If the linking down is occurred by nway, the device may miss the + * linking change event. And it wouldn't wake when linking on. + */ + if (!sw_linking && tp->rtl_ops.in_nway(tp)) + return true; + else + return false; +} + static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) { struct r8152 *tp = usb_get_intfdata(intf); @@ -3419,7 +3472,7 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message) mutex_lock(&tp->control); if (PMSG_IS_AUTO(message)) { - if (netif_running(netdev) && work_busy(&tp->schedule.work)) { + if (netif_running(netdev) && delay_autosuspend(tp)) { ret = -EBUSY; goto out1; } @@ -4049,6 +4102,7 @@ static int rtl_ops_init(struct r8152 *tp) ops->unload = rtl8152_unload; ops->eee_get = r8152_get_eee; ops->eee_set = r8152_set_eee; + ops->in_nway = rtl8152_in_nway; break; case RTL_VER_03: @@ -4063,6 +4117,7 @@ static int rtl_ops_init(struct r8152 *tp) ops->unload = rtl8153_unload; ops->eee_get = r8153_get_eee; ops->eee_set = r8153_set_eee; + ops->in_nway = rtl8153_in_nway; break; default: -- 2.30.2