From 2c0ac5b48a3586f612b85755b041ed7733dc8e6b Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Mon, 24 Apr 2017 12:30:15 +0200 Subject: [PATCH] serial: exar: Fix stuck MSIs After migrating 8250_exar to MSI in 172c33cb61da, we can get stuck without further interrupts because of the special wake-up event these chips send. They are only cleared by reading INT0. As we fail to do so during startup and shutdown, we can leave the interrupt line asserted, which is fatal with edge-triggered MSIs. Add the required reading of INT0 to startup and shutdown. Also account for the fact that a pending wake-up interrupt means we have to return 1 from exar_handle_irq. Drop the unneeded reading of INT1..3 along with this - those never reset anything. An alternative approach would have been disabling the wake-up interrupt. Unfortunately, this feature (REGB[17] = 1) is not available on the XR17D15X. Fixes: 172c33cb61da ("serial: exar: Enable MSI support") Signed-off-by: Jan Kiszka Reviewed-by: Andy Shevchenko Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_port.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index e7765f010fe8..68fd045a7025 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -47,6 +47,7 @@ /* * These are definitions for the Exar XR17V35X and XR17(C|D)15X */ +#define UART_EXAR_INT0 0x80 #define UART_EXAR_SLEEP 0x8b /* Sleep mode */ #define UART_EXAR_DVID 0x8d /* Device identification */ @@ -1869,17 +1870,13 @@ static int serial8250_default_handle_irq(struct uart_port *port) static int exar_handle_irq(struct uart_port *port) { unsigned int iir = serial_port_in(port, UART_IIR); - int ret; + int ret = 0; - ret = serial8250_handle_irq(port, iir); + if (((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X)) && + serial_port_in(port, UART_EXAR_INT0) != 0) + ret = 1; - if ((port->type == PORT_XR17V35X) || - (port->type == PORT_XR17D15X)) { - serial_port_in(port, 0x80); - serial_port_in(port, 0x81); - serial_port_in(port, 0x82); - serial_port_in(port, 0x83); - } + ret |= serial8250_handle_irq(port, iir); return ret; } @@ -2177,6 +2174,8 @@ int serial8250_do_startup(struct uart_port *port) serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); + if ((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X)) + serial_port_in(port, UART_EXAR_INT0); /* * At this point, there's no way the LSR could still be 0xff; @@ -2335,6 +2334,8 @@ dont_test_tx_en: serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); + if ((port->type == PORT_XR17V35X) || (port->type == PORT_XR17D15X)) + serial_port_in(port, UART_EXAR_INT0); up->lsr_saved_flags = 0; up->msr_saved_flags = 0; -- 2.30.2